Jung, Joon -Hee
2016-10-11
Here, the global atmospheric models based on the Multi-scale Modeling Framework (MMF) are able to explicitly resolve subgrid-scale processes by using embedded 2-D Cloud-Resolving Models (CRMs). Up to now, however, those models do not include the orographic effects on the CRM grid scale. This study shows that the effects of CRM grid-scale orography can be simulated reasonably well by the Quasi-3-D MMF (Q3D MMF), which has been developed as a second-generation MMF. In the Q3D framework, the surface topography can be included in the CRM component by using a block representation of the mountains, so that no smoothing of themore » topographic height is necessary. To demonstrate the performance of such a model, the orographic effects over a steep mountain are simulated in an idealized experimental setup with each of the Q3D MMF and the full 3-D CRM. The latter is used as a benchmark. Comparison of the results shows that the Q3D MMF is able to reproduce the horizontal distribution of orographic precipitation and the flow changes around mountains as simulated by the 3-D CRM, even though the embedded CRMs of the Q3D MMF recognize only some aspects of the complex 3-D topography. It is also shown that the use of 3-D CRMs in the Q3D framework, rather than 2-D CRMs, has positive impacts on the simulation of wind fields but does not substantially change the simulated precipitation.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jung, Joon -Hee
Here, the global atmospheric models based on the Multi-scale Modeling Framework (MMF) are able to explicitly resolve subgrid-scale processes by using embedded 2-D Cloud-Resolving Models (CRMs). Up to now, however, those models do not include the orographic effects on the CRM grid scale. This study shows that the effects of CRM grid-scale orography can be simulated reasonably well by the Quasi-3-D MMF (Q3D MMF), which has been developed as a second-generation MMF. In the Q3D framework, the surface topography can be included in the CRM component by using a block representation of the mountains, so that no smoothing of themore » topographic height is necessary. To demonstrate the performance of such a model, the orographic effects over a steep mountain are simulated in an idealized experimental setup with each of the Q3D MMF and the full 3-D CRM. The latter is used as a benchmark. Comparison of the results shows that the Q3D MMF is able to reproduce the horizontal distribution of orographic precipitation and the flow changes around mountains as simulated by the 3-D CRM, even though the embedded CRMs of the Q3D MMF recognize only some aspects of the complex 3-D topography. It is also shown that the use of 3-D CRMs in the Q3D framework, rather than 2-D CRMs, has positive impacts on the simulation of wind fields but does not substantially change the simulated precipitation.« less
NASA Astrophysics Data System (ADS)
Jung, Joon-Hee
2016-12-01
The global atmospheric models based on the Multi-scale Modeling Framework (MMF) are able to explicitly resolve subgrid-scale processes by using embedded 2-D Cloud-Resolving Models (CRMs). Up to now, however, those models do not include the orographic effects on the CRM grid scale. This study shows that the effects of CRM grid-scale orography can be simulated reasonably well by the Quasi-3-D MMF (Q3D MMF), which has been developed as a second-generation MMF. In the Q3D framework, the surface topography can be included in the CRM component by using a block representation of the mountains, so that no smoothing of the topographic height is necessary. To demonstrate the performance of such a model, the orographic effects over a steep mountain are simulated in an idealized experimental setup with each of the Q3D MMF and the full 3-D CRM. The latter is used as a benchmark. Comparison of the results shows that the Q3D MMF is able to reproduce the horizontal distribution of orographic precipitation and the flow changes around mountains as simulated by the 3-D CRM, even though the embedded CRMs of the Q3D MMF recognize only some aspects of the complex 3-D topography. It is also shown that the use of 3-D CRMs in the Q3D framework, rather than 2-D CRMs, has positive impacts on the simulation of wind fields but does not substantially change the simulated precipitation.
NASA Astrophysics Data System (ADS)
Chern, J. D.; Tao, W. K.; Lang, S. E.; Matsui, T.; Mohr, K. I.
2014-12-01
Four six-month (March-August 2014) experiments with the Goddard Multi-scale Modeling Framework (MMF) were performed to study the impacts of different Goddard one-moment bulk microphysical schemes and large-scale forcings on the performance of the MMF. Recently a new Goddard one-moment bulk microphysics with four-ice classes (cloud ice, snow, graupel, and frozen drops/hail) has been developed based on cloud-resolving model simulations with large-scale forcings from field campaign observations. The new scheme has been successfully implemented to the MMF and two MMF experiments were carried out with this new scheme and the old three-ice classes (cloud ice, snow graupel) scheme. The MMF has global coverage and can rigorously evaluate microphysics performance for different cloud regimes. The results show MMF with the new scheme outperformed the old one. The MMF simulations are also strongly affected by the interaction between large-scale and cloud-scale processes. Two MMF sensitivity experiments with and without nudging large-scale forcings to those of ERA-Interim reanalysis were carried out to study the impacts of large-scale forcings. The model simulated mean and variability of surface precipitation, cloud types, cloud properties such as cloud amount, hydrometeors vertical profiles, and cloud water contents, etc. in different geographic locations and climate regimes are evaluated against GPM, TRMM, CloudSat/CALIPSO satellite observations. The Goddard MMF has also been coupled with the Goddard Satellite Data Simulation Unit (G-SDSU), a system with multi-satellite, multi-sensor, and multi-spectrum satellite simulators. The statistics of MMF simulated radiances and backscattering can be directly compared with satellite observations to assess the strengths and/or deficiencies of MMF simulations and provide guidance on how to improve the MMF and microphysics.
Wang, Minghuai; Larson, Vincent E.; Ghan, Steven; ...
2015-04-18
In this study, a higher-order turbulence closure scheme, called Cloud Layers Unified by Binormals (CLUBB), is implemented into a Multi-scale Modeling Framework (MMF) model to improve low cloud simulations. The performance of CLUBB in MMF simulations with two different microphysics configurations (one-moment cloud microphysics without aerosol treatment and two-moment cloud microphysics coupled with aerosol treatment) is evaluated against observations and further compared with results from the Community Atmosphere Model, Version 5 (CAM5) with conventional cloud parameterizations. CLUBB is found to improve low cloud simulations in the MMF, and the improvement is particularly evident in the stratocumulus-to-cumulus transition regions. Compared tomore » the single-moment cloud microphysics, CLUBB with two-moment microphysics produces clouds that are closer to the coast, and agrees better with observations. In the stratocumulus-to cumulus transition regions, CLUBB with two-moment cloud microphysics produces shortwave cloud forcing in better agreement with observations, while CLUBB with single moment cloud microphysics overestimates shortwave cloud forcing. CLUBB is further found to produce quantitatively similar improvements in the MMF and CAM5, with slightly better performance in the MMF simulations (e.g., MMF with CLUBB generally produces low clouds that are closer to the coast than CAM5 with CLUBB). As a result, improved low cloud simulations in MMF make it an even more attractive tool for studying aerosol-cloud-precipitation interactions.« less
NASA Technical Reports Server (NTRS)
Xu, Kuan-Man; Cheng, Anning
2010-01-01
This study presents preliminary results from a multiscale modeling framework (MMF) with an advanced third-order turbulence closure in its cloud-resolving model (CRM) component. In the original MMF, the Community Atmosphere Model (CAM3.5) is used as the host general circulation model (GCM), and the System for Atmospheric Modeling with a first-order turbulence closure is used as the CRM for representing cloud processes in each grid box of the GCM. The results of annual and seasonal means and diurnal variability are compared between the modified and original MMFs and the CAM3.5. The global distributions of low-level cloud amounts and precipitation and the amounts of low-level clouds in the subtropics and middle-level clouds in mid-latitude storm track regions in the modified MMF show substantial improvement relative to the original MMF when both are compared to observations. Some improvements can also be seen in the diurnal variability of precipitation.
Progress in the Development of a Global Quasi-3-D Multiscale Modeling Framework
NASA Astrophysics Data System (ADS)
Jung, J.; Konor, C. S.; Randall, D. A.
2017-12-01
The Quasi-3-D Multiscale Modeling Framework (Q3D MMF) is a second-generation MMF, which has following advances over the first-generation MMF: 1) The cloud-resolving models (CRMs) that replace conventional parameterizations are not confined to the large-scale dynamical-core grid cells, and are seamlessly connected to each other, 2) The CRMs sense the three-dimensional large- and cloud-scale environment, 3) Two perpendicular sets of CRM channels are used, and 4) The CRMs can resolve the steep surface topography along the channel direction. The basic design of the Q3D MMF has been developed and successfully tested in a limited-area modeling framework. Currently, global versions of the Q3D MMF are being developed for both weather and climate applications. The dynamical cores governing the large-scale circulation in the global Q3D MMF are selected from two cube-based global atmospheric models. The CRM used in the model is the 3-D nonhydrostatic anelastic Vector-Vorticity Model (VVM), which has been tested with the limited-area version for its suitability for this framework. As a first step of the development, the VVM has been reconstructed on the cubed-sphere grid so that it can be applied to global channel domains and also easily fitted to the large-scale dynamical cores. We have successfully tested the new VVM by advecting a bell-shaped passive tracer and simulating the evolutions of waves resulted from idealized barotropic and baroclinic instabilities. For improvement of the model, we also modified the tracer advection scheme to yield positive-definite results and plan to implement a new physics package that includes a double-moment microphysics and an aerosol physics. The interface for coupling the large-scale dynamical core and the VVM is under development. In this presentation, we shall describe the recent progress in the development and show some test results.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Larson, Vincent
2016-11-25
The Multiscale Modeling Framework (MMF) embeds a cloud-resolving model in each grid column of a General Circulation Model (GCM). A MMF model does not need to use a deep convective parameterization, and thereby dispenses with the uncertainties in such parameterizations. However, MMF models grossly under-resolve shallow boundary-layer clouds, and hence those clouds may still benefit from parameterization. In this grant, we successfully created a climate model that embeds a cloud parameterization (“CLUBB”) within a MMF model. This involved interfacing CLUBB’s clouds with microphysics and reducing computational cost. We have evaluated the resulting simulated clouds and precipitation with satellite observations. Themore » chief benefit of the project is to provide a MMF model that has an improved representation of clouds and that provides improved simulations of precipitation.« less
A Multi-scale Modeling System: Developments, Applications and Critical Issues
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo; Chern, Jiundar; Atlas, Robert; Randall, David; Lin, Xin; Khairoutdinov, Marat; Li, Jui-Lin; Waliser, Duane E.; Hou, Arthur; Peters-Lidard, Christa;
2006-01-01
A multi-scale modeling framework (MMF), which replaces the conventional cloud parameterizations with a cloud-resolving model (CRM) in each grid column of a GCM, constitutes a new and promising approach. The MMF can provide for global coverage and two-way interactions between the CRMs and their parent GCM. The GCM allows global coverage and the CRM allows explicit simulation of cloud processes and their interactions with radiation and surface processes. A new MMF has been developed that is based the Goddard finite volume GCM (fvGCM) and the Goddard Cumulus Ensemble (GCE) model. This Goddard MMF produces many features that are similar to another MMF that was developed at Colorado State University (CSU), such as an improved .surface precipitation pattern, better cloudiness, improved diurnal variability over both oceans and continents, and a stronger, propagating Madden-Julian oscillation (MJO) compared to their parent GCMs using conventional cloud parameterizations. Both MMFs also produce a precipitation bias in the western Pacific during Northern Hemisphere summer. However, there are also notable differences between two MMFs. For example, the CSU MMF simulates less rainfall over land than its parent GCM. This is why the CSU MMF simulated less overall global rainfall than its parent GCM. The Goddard MMF overestimates global rainfall because of its oceanic component. Some critical issues associated with the Goddard MMF are presented in this paper.
Coupled fvGCM-GCE Modeling System, 3D Cloud-Resolving Model and Cloud Library
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2005-01-01
Recent GEWEX Cloud System Study (GCSS) model comparison projects have indicated that cloud-resolving models (CRMs) agree with observations better than traditional singlecolumn models in simulating various types of clouds and cloud systems from Merent geographic locations. Current and future NASA satellite programs can provide cloud, precipitation, aerosol and other data at very fine spatial and temporal scales. It requires a coupled global circulation model (GCM) and cloudscale model (termed a super-parameterization or multiscale modeling framework, MMF) to use these satellite data to improve the understanding of the physical processes that are responsible for the variation in global and regional climate and hydrological systems. The use of a GCM will enable global coverage, and the use of a CRM will allow for better and more sophisticated physical parameteridon NASA satellite and field campaign cloud related datasets can provide initial conditions as well as validation for both the MMF and CRMs. A seed fund is available at NASA Goddard to build a MMF based on the 2D Goddard cumulus Ensemble (GCE) model and the Goddard finite volume general circulation model (fvGCM). A prototype MMF in being developed and production nms will be conducted at the beginning of 2005. In this talk, I will present: (1) A brief review on GCE model and its applications on precipitation processes, (2) The Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), (3) A cloud library generated by Goddard MMF, and 3D GCE model, and (4) A brief discussion on the GCE model on developing a global cloud simulator.
Coupled fvGCM-GCE Modeling System, 3D Cloud-Resolving Model and Cloud Library
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2005-01-01
Recent GEWEX Cloud System Study (GCSS) model comparison projects have indicated that cloud- resolving models (CRMs) agree with observations better than traditional single-column models in simulating various types of clouds and cloud systems from different geographic locations. Current and future NASA satellite programs can provide cloud, precipitation, aerosol and other data at very fine spatial and temporal scales. It requires a coupled global circulation model (GCM) and cloud-scale model (termed a super-parameterization or multi-scale modeling framework, MMF) to use these satellite data to improve the understanding of the physical processes that are responsible for the variation in global and regional climate and hydrological systems. The use of a GCM will enable global coverage, and the use of a CRM will allow for better and more sophisticated physical parameterization. NASA satellite and field campaign cloud related datasets can provide initial conditions as well as validation for both the MMF and CRMs. A seed fund is available at NASA Goddard to build a MMF based on the 2D Goddard Cumulus Ensemble (GCE) model and the Goddard finite volume general circulation model (fvGCM). A prototype MMF in being developed and production runs will be conducted at the beginning of 2005. In this talk, I will present: (1) A brief review on GCE model and its applications on precipitation processes, ( 2 ) The Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), (3) A cloud library generated by Goddard MMF, and 3D GCE model, and (4) A brief discussion on the GCE model on developing a global cloud simulator.
Evaluating and Improving Cloud Processes in the Multi-Scale Modeling Framework
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ackerman, Thomas P.
2015-03-01
The research performed under this grant was intended to improve the embedded cloud model in the Multi-scale Modeling Framework (MMF) for convective clouds by using a 2-moment microphysics scheme rather than the single moment scheme used in all the MMF runs to date. The technical report and associated documents describe the results of testing the cloud resolving model with fixed boundary conditions and evaluation of model results with data. The overarching conclusion is that such model evaluations are problematic because errors in the forcing fields control the results so strongly that variations in parameterization values cannot be usefully constrained
Improving NASA's Multiscale Modeling Framework for Tropical Cyclone Climate Study
NASA Technical Reports Server (NTRS)
Shen, Bo-Wen; Nelson, Bron; Cheung, Samson; Tao, Wei-Kuo
2013-01-01
One of the current challenges in tropical cyclone (TC) research is how to improve our understanding of TC interannual variability and the impact of climate change on TCs. Recent advances in global modeling, visualization, and supercomputing technologies at NASA show potential for such studies. In this article, the authors discuss recent scalability improvement to the multiscale modeling framework (MMF) that makes it feasible to perform long-term TC-resolving simulations. The MMF consists of the finite-volume general circulation model (fvGCM), supplemented by a copy of the Goddard cumulus ensemble model (GCE) at each of the fvGCM grid points, giving 13,104 GCE copies. The original fvGCM implementation has a 1D data decomposition; the revised MMF implementation retains the 1D decomposition for most of the code, but uses a 2D decomposition for the massive copies of GCEs. Because the vast majority of computation time in the MMF is spent computing the GCEs, this approach can achieve excellent speedup without incurring the cost of modifying the entire code. Intelligent process mapping allows differing numbers of processes to be assigned to each domain for load balancing. The revised parallel implementation shows highly promising scalability, obtaining a nearly 80-fold speedup by increasing the number of cores from 30 to 3,335.
NASA Technical Reports Server (NTRS)
Shen, Bo-Wen; Tao, Wei-Kuo; Chern, Jiun-Dar
2007-01-01
Improving our understanding of hurricane inter-annual variability and the impact of climate change (e.g., doubling CO2 and/or global warming) on hurricanes brings both scientific and computational challenges to researchers. As hurricane dynamics involves multiscale interactions among synoptic-scale flows, mesoscale vortices, and small-scale cloud motions, an ideal numerical model suitable for hurricane studies should demonstrate its capabilities in simulating these interactions. The newly-developed multiscale modeling framework (MMF, Tao et al., 2007) and the substantial computing power by the NASA Columbia supercomputer show promise in pursuing the related studies, as the MMF inherits the advantages of two NASA state-of-the-art modeling components: the GEOS4/fvGCM and 2D GCEs. This article focuses on the computational issues and proposes a revised methodology to improve the MMF's performance and scalability. It is shown that this prototype implementation enables 12-fold performance improvements with 364 CPUs, thereby making it more feasible to study hurricane climate.
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2006-01-01
Recent GEWEX Cloud System Study (GCSS) model comparison projects have indicated that cloud-resolving models (CRMs) agree with observations better than traditional single-column models in simulating various types of clouds and cloud systems from different geographic locations. Current and future NASA satellite programs can provide cloud, precipitation, aerosol and other data at very fine spatial and temporal scales. It requires a coupled global circulation model (GCM) and cloud-scale model (termed a super-parameterization or multi-scale modeling framework, MMF) to use these satellite data to improve the understanding of the physical processes that are responsible for the variation in global and regional climate and hydrological systems. The use of a GCM will enable global coverage, and the use of a CRM will allow for better and more sophisticated physical parameterization. NASA satellite and field campaign cloud related datasets can provide initial conditions as well as validation for both the MMF and CFWs. The Goddard MMF is based on the 2D Goddard Cumulus Ensemble (GCE) model and the Goddard finite volume general circulation model (fvGCM), and it has started production runs with two years results (1 998 and 1999). In this talk, I will present: (1) A brief review on GCE model and its applications on precipitation processes (microphysical and land processes), (2) The Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), and preliminary results (the comparison with traditional GCMs), and (3) A discussion on the Goddard WRF version (its developments and applications).
Zhao, Wei; Marchand, Roger; Fu, Qiang
2017-07-08
Millimeter Wavelength Cloud Radar (MMCR) data from December 1996 to December 2010, collected at the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) program Southern Great Plains (SGP) site, are used to examine the diurnal cycle of hydrometeor occurrence. These data are categorized into clouds (-40 dBZ e ≤ reflectivity < -10 dBZ e), drizzle and light precipitation (-10 dBZ e ≤ reflectivity < 10 dBZ e), and heavy precipitation (reflectivity ≥ 10 dBZ e). The same criteria are implemented for the observation-equivalent reflectivity calculated by feeding outputs from a Multiscale Modeling Framework (MMF) climate model into a radar simulator.more » The MMF model consists of the National Center for Atmospheric Research Community Atmosphere Model with conventional cloud parameterizations replaced by a cloud-resolving model. We find that a radar simulator combined with the simple reflectivity categories can be an effective approach for evaluating diurnal variations in model hydrometeor occurrence. It is shown that the MMF only marginally captures observed increases in the occurrence of boundary layer clouds after sunrise in spring and autumn and does not capture diurnal changes in boundary layer clouds during the summer. Above the boundary layer, the MMF captures reasonably well diurnal variations in the vertical structure of clouds and light and heavy precipitation in the summer but not in the spring.« less
Aerosol-cloud interactions in a multi-scale modeling framework
NASA Astrophysics Data System (ADS)
Lin, G.; Ghan, S. J.
2017-12-01
Atmospheric aerosols play an important role in changing the Earth's climate through scattering/absorbing solar and terrestrial radiation and interacting with clouds. However, quantification of the aerosol effects remains one of the most uncertain aspects of current and future climate projection. Much of the uncertainty results from the multi-scale nature of aerosol-cloud interactions, which is very challenging to represent in traditional global climate models (GCMs). In contrast, the multi-scale modeling framework (MMF) provides a viable solution, which explicitly resolves the cloud/precipitation in the cloud resolved model (CRM) embedded in the GCM grid column. In the MMF version of community atmospheric model version 5 (CAM5), aerosol processes are treated with a parameterization, called the Explicit Clouds Parameterized Pollutants (ECPP). It uses the cloud/precipitation statistics derived from the CRM to treat the cloud processing of aerosols on the GCM grid. However, this treatment treats clouds on the CRM grid but aerosols on the GCM grid, which is inconsistent with the reality that cloud-aerosol interactions occur on the cloud scale. To overcome the limitation, here, we propose a new aerosol treatment in the MMF: Explicit Clouds Explicit Aerosols (ECEP), in which we resolve both clouds and aerosols explicitly on the CRM grid. We first applied the MMF with ECPP to the Accelerated Climate Modeling for Energy (ACME) model to have an MMF version of ACME. Further, we also developed an alternative version of ACME-MMF with ECEP. Based on these two models, we have conducted two simulations: one with the ECPP and the other with ECEP. Preliminary results showed that the ECEP simulations tend to predict higher aerosol concentrations than ECPP simulations, because of the more efficient vertical transport from the surface to the higher atmosphere but the less efficient wet removal. We also found that the cloud droplet number concentrations are also different between the two simulations due to the difference in the cloud droplet lifetime. Next, we will explore how the ECEP treatment affects the anthropogenic aerosol forcing, particularly the aerosol indirect forcing, by comparing present-day and pre-industrial simulations.
Investigating ice nucleation in cirrus clouds with an aerosol-enabled Multiscale Modeling Framework
Zhang, Chengzhu; Wang, Minghuai; Morrison, H.; ...
2014-11-06
In this study, an aerosol-dependent ice nucleation scheme [Liu and Penner, 2005] has been implemented in an aerosol-enabled multi-scale modeling framework (PNNL MMF) to study ice formation in upper troposphere cirrus clouds through both homogeneous and heterogeneous nucleation. The MMF model represents cloud scale processes by embedding a cloud-resolving model (CRM) within each vertical column of a GCM grid. By explicitly linking ice nucleation to aerosol number concentration, CRM-scale temperature, relative humidity and vertical velocity, the new MMF model simulates the persistent high ice supersaturation and low ice number concentration (10 to 100/L) at cirrus temperatures. The low ice numbermore » is attributed to the dominance of heterogeneous nucleation in ice formation. The new model simulates the observed shift of the ice supersaturation PDF towards higher values at low temperatures following homogeneous nucleation threshold. The MMF models predict a higher frequency of midlatitude supersaturation in the Southern hemisphere and winter hemisphere, which is consistent with previous satellite and in-situ observations. It is shown that compared to a conventional GCM, the MMF is a more powerful model to emulate parameters that evolve over short time scales such as supersaturation. Sensitivity tests suggest that the simulated global distribution of ice clouds is sensitive to the ice nucleation schemes and the distribution of sulfate and dust aerosols. Simulations are also performed to test empirical parameters related to auto-conversion of ice crystals to snow. Results show that with a value of 250 μm for the critical diameter, Dcs, that distinguishes ice crystals from snow, the model can produce good agreement to the satellite retrieved products in terms of cloud ice water path and ice water content, while the total ice water is not sensitive to the specification of Dcs value.« less
Simulations and Evaluation of Mesoscale Convective Systems in a Multi-scale Modeling Framework (MMF)
NASA Astrophysics Data System (ADS)
Chern, J. D.; Tao, W. K.
2017-12-01
It is well known that the mesoscale convective systems (MCS) produce more than 50% of rainfall in most tropical regions and play important roles in regional and global water cycles. Simulation of MCSs in global and climate models is a very challenging problem. Typical MCSs have horizontal scale of a few hundred kilometers. Models with a domain of several hundred kilometers and fine enough resolution to properly simulate individual clouds are required to realistically simulate MCSs. The multiscale modeling framework (MMF), which replaces traditional cloud parameterizations with cloud-resolving models (CRMs) within a host atmospheric general circulation model (GCM), has shown some capabilities of simulating organized MCS-like storm signals and propagations. However, its embedded CRMs typically have small domain (less than 128 km) and coarse resolution ( 4 km) that cannot realistically simulate MCSs and individual clouds. In this study, a series of simulations were performed using the Goddard MMF. The impacts of the domain size and model grid resolution of the embedded CRMs on simulating MCSs are examined. The changes of cloud structure, occurrence, and properties such as cloud types, updraft and downdraft, latent heating profile, and cold pool strength in the embedded CRMs are examined in details. The simulated MCS characteristics are evaluated against satellite measurements using the Goddard Satellite Data Simulator Unit. The results indicate that embedded CRMs with large domain and fine resolution tend to produce better simulations compared to those simulations with typical MMF configuration (128 km domain size and 4 km model grid spacing).
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhang, Kai; Fu, Rong; Shaikh, Muhammad J.
We evaluate the Community Atmosphere Model Version 5 (CAM5) with a higher-order turbulence closure scheme, named Cloud Layers Unified By Binomials (CLUBB), and a Multiscale Modeling Framework (MMF) with two different microphysics configurations to investigate their influences on rainfall simulations over Southern Amazonia. The two different microphysics configurations in MMF are the one-moment cloud microphysics without aerosol treatment (SAM1MOM) and two-moment cloud microphysics coupled with aerosol treatment (SAM2MOM). Results show that both MMF-SAM2MOM and CLUBB effectively reduce the low biases of rainfall, mainly during the wet season. The CLUBB reduces low biases of humidity in the lower troposphere with furthermore » reduced shallow clouds. The latter enables more surface solar flux, leading to stronger convection and more rainfall. MMF, especially MMF-SAM2MOM, unstablizes the atmosphere with more moisture and higher atmospheric temperatures in the atmospheric boundary layer, allowing the growth of more extreme convection and further generating more deep convection. MMF-SAM2MOM significantly increases rainfall in the afternoon, but it does not reduce the early bias of the diurnal rainfall peak; LUBB, on the other hand, delays the afternoon peak time and produces more precipitation in the early morning, due to more realistic gradual transition between shallow and deep convection. MMF appears to be able to realistically capture the observed increase of relative humidity prior to deep convection, especially with its two-moment configuration. In contrast, in CAM5 and CAM5 with CLUBB, occurrence of deep convection in these models appears to be a result of stronger heating rather than higher relative humidity.« less
A Coupled fcGCM-GCE Modeling System: A 3D Cloud Resolving Model and a Regional Scale Model
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2005-01-01
Recent GEWEX Cloud System Study (GCSS) model comparison projects have indicated that cloud-resolving models (CRMs) agree with observations better than traditional single-column models in simulating various types of clouds and cloud systems from different geographic locations. Current and future NASA satellite programs can provide cloud, precipitation, aerosol and other data at very fine spatial and temporal scales. It requires a coupled global circulation model (GCM) and cloud-scale model (termed a super-parameterization or multi-scale modeling framework, MMF) to use these satellite data to improve the understanding of the physical processes that are responsible for the variation in global and regional climate and hydrological systems. The use of a GCM will enable global coverage, and the use of a CRM will allow for better and ore sophisticated physical parameterization. NASA satellite and field campaign cloud related datasets can provide initial conditions as well as validation for both the MMF and CRMs. The Goddard MMF is based on the 2D Goddard Cumulus Ensemble (GCE) model and the Goddard finite volume general circulation model (fvGCM), and it has started production runs with two years results (1998 and 1999). Also, at Goddard, we have implemented several Goddard microphysical schemes (21CE, several 31CE), Goddard radiation (including explicity calculated cloud optical properties), and Goddard Land Information (LIS, that includes the CLM and NOAH land surface models) into a next generation regional scale model, WRF. In this talk, I will present: (1) A Brief review on GCE model and its applications on precipitation processes (microphysical and land processes), (2) The Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), and preliminary results (the comparison with traditional GCMs), (3) A discussion on the Goddard WRF version (its developments and applications), and (4) The characteristics of the four-dimensional cloud data sets (or cloud library) stored at Goddard.
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2007-01-01
Recent GEWEX Cloud System Study (GCSS) model comparison projects have indicated that cloud-resolving models (CRMs) agree with observations better than traditional single-column models in simulating various types of clouds and cloud systems from different geographic locations. Current and future NASA satellite programs can provide cloud, precipitation, aerosol and other data at very fine spatial and temporal scales. It requires a coupled global circulation model (GCM) and cloud-scale model (termed a superparameterization or multi-scale modeling framework, MMF) to use these satellite data to improve the understanding of the physical processes that are responsible for the variation in global and regional climate and hydrological systems. The use of a GCM will enable global coverage, and the use of a CRM will allow for better and more sophisticated physical parameterization. NASA satellite and field campaign cloud related datasets can provide initial conditions as well as validation for both the MMF and CRMs. The Goddard MMF is based on the 2D Goddard Cumulus Ensemble (GCE) model and the Goddard finite volume general circulation model (fvGCM), and it has started production runs with two years results (1998 and 1999). Also, at Goddard, we have implemented several Goddard microphysical schemes (2ICE, several 31CE), Goddard radiation (including explicitly calculated cloud optical properties), and Goddard Land Information (LIS, that includes the CLM and NOAH land surface models) into a next generatio11 regional scale model, WRF. In this talk, I will present: (1) A brief review on GCE model and its applications on precipitation processes (microphysical and land processes), (2) The Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), and preliminary results (the comparison with traditional GCMs), and (3) A discussion on the Goddard WRF version (its developments and applications).
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2006-01-01
Recent GEWEX Cloud System Study (GCSS) model comparison projects have indicated that cloud-resolving models (CRMs) agree with observations better than traditional single-column models in simulating various types of clouds and cloud systems from different geographic locations. Current and future NASA satellite programs can provide cloud, precipitation, aerosol and other data at very fine spatial and temporal scales. It requires a coupled global circulation model (GCM) and cloud-scale model (termed a super-parameterization or multi-scale modeling framework, MMF) to use these satellite data to improve the understanding of the physical processes that are responsible for the variation in global and regional climate and hydrological systems. The use of a GCM will enable global coverage, and the use of a CRM will allow for better and more sophisticated physical parameterization. NASA satellite and field campaign cloud related datasets can provide initial conditions as well as validation for both the MMF and CRMs. The Goddard MMF is based on the 2D Goddard Cumulus Ensemble (GCE) model and the Goddard finite volume general circulation model (fvGCM), and it has started production runs with two years results (1998 and 1999). Also, at Goddard, we have implemented several Goddard microphysical schemes (21CE, several 31CE), Goddard radiation (including explicitly calculated cloud optical properties), and Goddard Land Information (LIS, that includes the CLM and NOAH land surface models) into a next generation regional scale model, WRF. In this talk, I will present: (1) A brief review on GCE model and its applications on precipitation processes (microphysical and land processes), (2) The Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), and preliminary results (the comparison with traditional GCMs), and (3) A discussion on the Goddard WRF version (its developments and applications).
Coupled fvGCM-GCE Modeling System, TRMM Latent Heating and Cloud Library
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2004-01-01
Recent GEWEX Cloud System Study (GCSS) model comparison projects have indicated that cloud-resolving models (CRMs) agree with observations better than traditional single-column models in simulating various types of clouds and cloud systems from different geographic locations. Current and future NASA satellite programs can provide cloud, precipitation, aerosol and other data at very fine spatial and temporal scales. It requires a coupled global circulation model (GCM) and cloud-scale model (termed a super-parameterization or multi-scale modeling framework, MMF) to use these satellite data to imiprove the understanding of the physical processes that are responsible for the variation in global and regional climate and hydrological systems. The use of a GCM will enable global coverage, and the use of a CRM will allow for better and more sophisticated physical parameterization. NASA satellite and field campaign cloud related datasets can provide initial conditions as well as validation for both the MMF and CRMs. A seed fund is available at NASA Goddard to build a MMF based on the 2D GCE model and the Goddard finite volume general circulation model (fvGCM). A prototype MMF will be developed by the end of 2004 and production runs will be conducted at the beginning of 2005. The purpose of this proposal is to augment the current Goddard MMF and other cloud modeling activities. I this talk, I will present: (1) A summary of the second Cloud Modeling Workshop took place at NASA Goddard, (2) A summary of the third TRMM Latent Heating Workshop took place at Nara Japan, (3) A brief discussion on the Goddard research plan of using Weather Research Forecast (WRF) model, and (4) A brief discussion on the GCE model on developing a global cloud simulator.
Coupled fvGCM-GCE Modeling System: TRMM Latent Heating and Cloud Library
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2005-01-01
Recent GEWEX Cloud System Study (GCSS) model comparison projects have indicated that cloud-resolving models (CRMs) agree with observations better than traditional single-column models in simulating various types of clouds and cloud systems from different geographic locations. Current and future NASA satellite programs can provide cloud, precipitation, aerosol and other data at very fine spatial and temporal scales. It requires a coupled global circulation model (GCM) and cloud-scale model (termed a super-parameterization or multi-scale modeling framework, MMF) to use these satellite data to improve the understanding of the physical processes that are responsible for the variation in global and regional climate and hydrological systems. The use of a GCM will enable global coverage, and the use of a CRM will allow for better and more sophisticated physical parameterization. NASA satellite and field campaign cloud related datasets can provide initial conditions as well as validation for both the MMF and CRMs. A seed fund is available at NASA Goddard to build a MMF based on the 2D GCE model and the Goddard finite volume general circulation model (fvGCM). A prototype MMF will be developed by the end of 2004 and production runs will be conducted at the beginning of 2005. The purpose of this proposal is to augment the current Goddard MMF and other cloud modeling activities. In this talk, I will present: (1) A summary of the second Cloud Modeling Workshop took place at NASA Goddard, (2) A summary of the third TRMM Latent Heating Workshop took place at Nara Japan, (3) A brief discussion on the GCE model on developing a global cloud simulator.
NASA Astrophysics Data System (ADS)
Zhao, Wei; Marchand, Roger; Fu, Qiang
2017-12-01
Long-term reflectivity data collected by a millimeter cloud radar at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site are used to examine the diurnal cycle of clouds and precipitation and are compared with the diurnal cycle simulated by a Multiscale Modeling Framework (MMF) climate model. The study uses a set of atmospheric states that were created specifically for the SGP and for the purpose of investigating under what synoptic conditions models compare well with observations on a statistical basis (rather than using case studies or seasonal or longer time scale averaging). Differences in the annual mean diurnal cycle between observations and the MMF are decomposed into differences due to the relative frequency of states, the daily mean vertical profile of hydrometeor occurrence, and the (normalized) diurnal variation of hydrometeors in each state. Here the hydrometeors are classified as cloud or precipitation based solely on the reflectivity observed by a millimeter radar or generated by a radar simulator. The results show that the MMF does not capture the diurnal variation of low clouds well in any of the states but does a reasonable job capturing the diurnal variations of high clouds and precipitation in some states. In particular, the diurnal variations in states that occur during summer are reasonably captured by the MMF, while the diurnal variations in states that occur during the transition seasons (spring and fall) are not well captured. Overall, the errors in the annual composite are due primarily to errors in the daily mean of hydrometeor occurrence (rather than diurnal variations), but errors in the state frequency (that is, the distribution of weather states in the model) also play a significant role.
Performance of the Goddard Multiscale Modeling Framework with Goddard Ice Microphysical Schemes
NASA Technical Reports Server (NTRS)
Chern, Jiun-Dar; Tao, Wei-Kuo; Lang, Stephen E.; Matsui, Toshihisa; Li, J.-L.; Mohr, Karen I.; Skofronick-Jackson, Gail M.; Peters-Lidard, Christa D.
2016-01-01
The multiscale modeling framework (MMF), which replaces traditional cloud parameterizations with cloud-resolving models (CRMs) within a host atmospheric general circulation model (GCM), has become a new approach for climate modeling. The embedded CRMs make it possible to apply CRM-based cloud microphysics directly within a GCM. However, most such schemes have never been tested in a global environment for long-term climate simulation. The benefits of using an MMF to evaluate rigorously and improve microphysics schemes are here demonstrated. Four one-moment microphysical schemes are implemented into the Goddard MMF and their results validated against three CloudSat/CALIPSO cloud ice products and other satellite data. The new four-class (cloud ice, snow, graupel, and frozen drops/hail) ice scheme produces a better overall spatial distribution of cloud ice amount, total cloud fractions, net radiation, and total cloud radiative forcing than earlier three-class ice schemes, with biases within the observational uncertainties. Sensitivity experiments are conducted to examine the impact of recently upgraded microphysical processes on global hydrometeor distributions. Five processes dominate the global distributions of cloud ice and snow amount in long-term simulations: (1) allowing for ice supersaturation in the saturation adjustment, (2) three additional correction terms in the depositional growth of cloud ice to snow, (3) accounting for cloud ice fall speeds, (4) limiting cloud ice particle size, and (5) new size-mapping schemes for snow and graupel. Despite the cloud microphysics improvements, systematic errors associated with subgrid processes, cyclic lateral boundaries in the embedded CRMs, and momentum transport remain and will require future improvement.
Applications and Improvement of a Coupled, Global and Cloud-Resolving Modeling System
NASA Technical Reports Server (NTRS)
Tao, W.-K.; Chern, J.; Atlas, R.
2005-01-01
Recently Grabowski (2001) and Khairoutdinov and Randall (2001) have proposed the use of 2D CFWs as a "super parameterization" [or multi-scale modeling framework (MMF)] to represent cloud processes within atmospheric general circulation models (GCMs). In the MMF, a fine-resolution 2D CRM takes the place of the single-column parameterization used in conventional GCMs. A prototype Goddard MMF based on the 2D Goddard Cumulus Ensemble (GCE) model and the Goddard finite volume general circulation model (fvGCM) is now being developed. The prototype includes the fvGCM run at 2.50 x 20 horizontal resolution with 32 vertical layers from the surface to 1 mb and the 2D (x-z) GCE using 64 horizontal and 32 vertical grid points with 4 km horizontal resolution and a cyclic lateral boundary. The time step for the 2D GCE would be 15 seconds, and the fvGCM-GCE coupling frequency would be 30 minutes (i.e. the fvGCM physical time step). We have successfully developed an fvGCM-GCE coupler for this prototype. Because the vertical coordinate of the fvGCM (a terrain-following floating Lagrangian coordinate) is different from that of the GCE (a z coordinate), vertical interpolations between the two coordinates are needed in the coupler. In interpolating fields from the GCE to fvGCM, we use an existing fvGCM finite- volume piecewise parabolic mapping (PPM) algorithm, which conserves the mass, momentum, and total energy. A new finite-volume PPM algorithm, which conserves the mass, momentum and moist static energy in the z coordinate, is being developed for interpolating fields from the fvGCM to the GCE. In the meeting, we will discuss the major differences between the two MMFs (i.e., the CSU MMF and the Goddard MMF). We will also present performance and critical issues related to the MMFs. In addition, we will present multi-dimensional cloud datasets (i.e., a cloud data library) generated by the Goddard MMF that will be provided to the global modeling community to help improve the representation and performance of moist processes in climate models and to improve our understanding of cloud processes globally (the software tools needed to produce cloud statistics and to identify various types of clouds and cloud systems from both high-resolution satellite and model data will be also presented).
NASA Technical Reports Server (NTRS)
Matsui, Toshihisa; Chern, Jiun-Dar; Tao, Wei-Kuo; Lang, Stephen E.; Satoh, Masaki; Hashino, Tempei; Kubota, Takuji
2016-01-01
A 14-year climatology of Tropical Rainfall Measuring Mission (TRMM) collocated multi-sensor signal statistics reveal a distinct land-ocean contrast as well as geographical variability of precipitation type, intensity, and microphysics. Microphysics information inferred from the TRMM precipitation radar and Microwave Imager (TMI) show a large land-ocean contrast for the deep category, suggesting continental convective vigor. Over land, TRMM shows higher echo-top heights and larger maximum echoes, suggesting taller storms and more intense precipitation, as well as larger microwave scattering, suggesting the presence of morelarger frozen convective hydrometeors. This strong land-ocean contrast in deep convection is invariant over seasonal and multi-year time-scales. Consequently, relatively short-term simulations from two global storm-resolving models can be evaluated in terms of their land-ocean statistics using the TRMM Triple-sensor Three-step Evaluation via a satellite simulator. The models evaluated are the NASA Multi-scale Modeling Framework (MMF) and the Non-hydrostatic Icosahedral Cloud Atmospheric Model (NICAM). While both simulations can represent convective land-ocean contrasts in warm precipitation to some extent, near-surface conditions over land are relatively moisture in NICAM than MMF, which appears to be the key driver in the divergent warm precipitation results between the two models. Both the MMF and NICAM produced similar frequencies of large CAPE between land and ocean. The dry MMF boundary layer enhanced microwave scattering signals over land, but only NICAM had an enhanced deep convection frequency over land. Neither model could reproduce a realistic land-ocean contrast in in deep convective precipitation microphysics. A realistic contrast between land and ocean remains an issue in global storm-resolving modeling.
Emulating RRTMG Radiation with Deep Neural Networks for the Accelerated Model for Climate and Energy
NASA Astrophysics Data System (ADS)
Pal, A.; Norman, M. R.
2017-12-01
The RRTMG radiation scheme in the Accelerated Model for Climate and Energy Multi-scale Model Framework (ACME-MMF), is a bottleneck and consumes approximately 50% of the computational time. To simulate a case using RRTMG radiation scheme in ACME-MMF with high throughput and high resolution will therefore require a speed-up of this calculation while retaining physical fidelity. In this study, RRTMG radiation is emulated with Deep Neural Networks (DNNs). The first step towards this goal is to run a case with ACME-MMF and generate input data sets for the DNNs. A principal component analysis of these input data sets are carried out. Artificial data sets are created using the previous data sets to cover a wider space. These artificial data sets are used in a standalone RRTMG radiation scheme to generate outputs in a cost effective manner. These input-output pairs are used to train multiple architectures DNNs(1). Another DNN(2) is trained using the inputs to predict the error. A reverse emulation is trained to map the output to input. An error controlled code is developed with the two DNNs (1 and 2) and will determine when/if the original parameterization needs to be used.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gettelman, Andrew
2015-10-01
In this project we have been upgrading the Multiscale Modeling Framework (MMF) in the Community Atmosphere Model (CAM), also known as Super-Parameterized CAM (SP-CAM). This has included a major effort to update the coding standards and interface with CAM so that it can be placed on the main development trunk. It has also included development of a new software structure for CAM to be able to handle sub-grid column information. These efforts have formed the major thrust of the work.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bogenschutz, Peter; Moeng, Chin-Hoh
2015-10-13
The PI’s at the National Center for Atmospheric Research (NCAR), Chin-Hoh Moeng and Peter Bogenschutz, have primarily focused their time on the implementation of the Simplified-Higher Order Turbulence Closure (SHOC; Bogenschutz and Krueger 2013) to the Multi-scale Modeling Framework (MMF) global model and testing of SHOC on deep convective cloud regimes.
Force on Force Modeling with Formal Task Structures and Dynamic Geometry
2017-03-24
task framework, derived using the MMF methodology to structure a complex mission. It further demonstrated the integration of effects from a range of...application methodology was intended to support a combined developmental testing (DT) and operational testing (OT) strategy for selected systems under test... methodology to develop new or modify existing Models and Simulations (M&S) to: • Apply data from multiple, distributed sources (including test
Ehrenfeld, Stephan; Herbort, Oliver; Butz, Martin V.
2013-01-01
This paper addresses the question of how the brain maintains a probabilistic body state estimate over time from a modeling perspective. The neural Modular Modality Frame (nMMF) model simulates such a body state estimation process by continuously integrating redundant, multimodal body state information sources. The body state estimate itself is distributed over separate, but bidirectionally interacting modules. nMMF compares the incoming sensory and present body state information across the interacting modules and fuses the information sources accordingly. At the same time, nMMF enforces body state estimation consistency across the modules. nMMF is able to detect conflicting sensory information and to consequently decrease the influence of implausible sensor sources on the fly. In contrast to the previously published Modular Modality Frame (MMF) model, nMMF offers a biologically plausible neural implementation based on distributed, probabilistic population codes. Besides its neural plausibility, the neural encoding has the advantage of enabling (a) additional probabilistic information flow across the separate body state estimation modules and (b) the representation of arbitrary probability distributions of a body state. The results show that the neural estimates can detect and decrease the impact of false sensory information, can propagate conflicting information across modules, and can improve overall estimation accuracy due to additional module interactions. Even bodily illusions, such as the rubber hand illusion, can be simulated with nMMF. We conclude with an outlook on the potential of modeling human data and of invoking goal-directed behavioral control. PMID:24191151
LECKEL, K; BEECKEN, W-D; JONAS, D; OPPERMANN, E; COMAN, M C; BECK, K-F; CINATL, J; HAILER, N P; AUTH, M K H; BECHSTEIN, W O; SHIPKOVA, M; BLAHETA, R A
2003-01-01
Immunosuppression correlates with the development and recurrence of cancer. Mycophenolate mofetil (MMF) has been shown to reduce adhesion molecule expression and leucocyte recruitment into the donor organ. We have hypothesized that MMF might also prevent receptor-dependent tumour dissemination. Therefore, we have investigated the effects of MMF on tumour cell adhesion to human umbilical vein endothelial cells (HUVEC) and compared them with the effects on T cell–endothelial cell interactions. Influence of MMF on cellular adhesion to HUVEC was analysed using isolated CD4+ and CD8+ T cells, or WiDr colon adenocarcinoma cells as the model tumour. HUVEC receptors ICAM-1, VCAM-1, E-selectin and P-selectin were detected by flow cytometry, Western blot or Northern blot analysis. Binding activity of T cells or WiDr cells in the presence of MMF were measured using immobilized receptor globulin chimeras. MMF potently blocked both T cell and WiDr cell binding to endothelium by 80%. Surface expression of the endothelial cell receptors was reduced by MMF in a dose-dependent manner. E-selectin mRNA was concurrently reduced with a maximum effect at 1 µm. Interestingly, MMF acted differently on T cells and WiDr cells. Maximum efficacy of MMF was reached at 10 and 1 µm, respectively. Furthermore, MMF specifically suppressed T cell attachment to ICAM-1, VCAM-1 and P-selectin. In contrast, MMF prevented WiDr cell attachment to E-selectin. In conclusion, our data reveal distinct effects of MMF on both T cell adhesion and tumour cell adhesion to endothelial cells. This suggests that MMF not only interferes with the invasion of alloactivated T cells, but might also be of value in managing post-transplantation malignancy. PMID:14616783
Leckel, K; Beecken, W-D; Jonas, D; Oppermann, E; Coman, M C; Beck, K-F; Cinatl, J; Hailer, N P; Auth, M K H; Bechstein, W O; Shipkova, M; Blaheta, R A
2003-11-01
Immunosuppression correlates with the development and recurrence of cancer. Mycophenolate mofetil (MMF) has been shown to reduce adhesion molecule expression and leucocyte recruitment into the donor organ. We have hypothesized that MMF might also prevent receptor-dependent tumour dissemination. Therefore, we have investigated the effects of MMF on tumour cell adhesion to human umbilical vein endothelial cells (HUVEC) and compared them with the effects on T cell-endothelial cell interactions. Influence of MMF on cellular adhesion to HUVEC was analysed using isolated CD4+ and CD8+ T cells, or WiDr colon adenocarcinoma cells as the model tumour. HUVEC receptors ICAM-1, VCAM-1, E-selectin and P-selectin were detected by flow cytometry, Western blot or Northern blot analysis. Binding activity of T cells or WiDr cells in the presence of MMF were measured using immobilized receptor globulin chimeras. MMF potently blocked both T cell and WiDr cell binding to endothelium by 80%. Surface expression of the endothelial cell receptors was reduced by MMF in a dose-dependent manner. E-selectin mRNA was concurrently reduced with a maximum effect at 1 microm. Interestingly, MMF acted differently on T cells and WiDr cells. Maximum efficacy of MMF was reached at 10 and 1 microm, respectively. Furthermore, MMF specifically suppressed T cell attachment to ICAM-1, VCAM-1 and P-selectin. In contrast, MMF prevented WiDr cell attachment to E-selectin. In conclusion, our data reveal distinct effects of MMF on both T cell adhesion and tumour cell adhesion to endothelial cells. This suggests that MMF not only interferes with the invasion of alloactivated T cells, but might also be of value in managing post-transplantation malignancy.
Ehrenfeld, Stephan; Butz, Martin V
2013-02-01
Humans show admirable capabilities in movement planning and execution. They can perform complex tasks in various contexts, using the available sensory information very effectively. Body models and continuous body state estimations appear necessary to realize such capabilities. We introduce the Modular Modality Frame (MMF) model, which maintains a highly distributed, modularized body model continuously updating, modularized probabilistic body state estimations over time. Modularization is realized with respect to modality frames, that is, sensory modalities in particular frames of reference and with respect to particular body parts. We evaluate MMF performance on a simulated, nine degree of freedom arm in 3D space. The results show that MMF is able to maintain accurate body state estimations despite high sensor and motor noise. Moreover, by comparing the sensory information available in different modality frames, MMF can identify faulty sensory measurements on the fly. In the near future, applications to lightweight robot control should be pursued. Moreover, MMF may be enhanced with neural encodings by introducing neural population codes and learning techniques. Finally, more dexterous goal-directed behavior should be realized by exploiting the available redundant state representations.
The missions and means framework as an ontology
NASA Astrophysics Data System (ADS)
Deitz, Paul H.; Bray, Britt E.; Michaelis, James R.
2016-05-01
The analysis of warfare frequently suffers from an absence of logical structure for a] specifying explicitly the military mission and b] quantitatively evaluating the mission utility of alternative products and services. In 2003, the Missions and Means Framework (MMF) was developed to redress these shortcomings. The MMF supports multiple combatants, levels of war and, in fact, is a formal embodiment of the Military Decision-Making Process (MDMP). A major effect of incomplete analytic discipline in military systems analyses is that they frequently fall into the category of ill-posed problems in which they are under-specified, under-determined, or under-constrained. Critical context is often missing. This is frequently the result of incomplete materiel requirements analyses which have unclear linkages to higher levels of warfare, system-of-systems linkages, tactics, techniques and procedures, and the effect of opposition forces. In many instances the capabilities of materiel are assumed to be immutable. This is a result of not assessing how platform components morph over time due to damage, logistics, or repair. Though ill-posed issues can be found many places in military analysis, probably the greatest challenge comes in the disciplines of C4ISR supported by ontologies in which formal naming and definition of the types, properties, and interrelationships of the entities are fundamental to characterizing mission success. Though the MMF was not conceived as an ontology, over the past decade some workers, particularly in the field of communication, have labelled the MMF as such. This connection will be described and discussed.
Land-Atmosphere Coupling in the Multi-Scale Modelling Framework
NASA Astrophysics Data System (ADS)
Kraus, P. M.; Denning, S.
2015-12-01
The Multi-Scale Modeling Framework (MMF), in which cloud-resolving models (CRMs) are embedded within general circulation model (GCM) gridcells to serve as the model's cloud parameterization, has offered a number of benefits to GCM simulations. The coupling of these cloud-resolving models directly to land surface model instances, rather than passing averaged atmospheric variables to a single instance of a land surface model, the logical next step in model development, has recently been accomplished. This new configuration offers conspicuous improvements to estimates of precipitation and canopy through-fall, but overall the model exhibits warm surface temperature biases and low productivity.This work presents modifications to a land-surface model that take advantage of the new multi-scale modeling framework, and accommodate the change in spatial scale from a typical GCM range of ~200 km to the CRM grid-scale of 4 km.A parameterization is introduced to apportion modeled surface radiation into direct-beam and diffuse components. The diffuse component is then distributed among the land-surface model instances within each GCM cell domain. This substantially reduces the number excessively low light values provided to the land-surface model when cloudy conditions are modeled in the CRM, associated with its 1-D radiation scheme. The small spatial scale of the CRM, ~4 km, as compared with the typical ~200 km GCM scale, provides much more realistic estimates of precipitation intensity, this permits the elimination of a model parameterization of canopy through-fall. However, runoff at such scales can no longer be considered as an immediate flow to the ocean. Allowing sub-surface water flow between land-surface instances within the GCM domain affords better realism and also reduces temperature and productivity biases.The MMF affords a number of opportunities to land-surface modelers, providing both the advantages of direct simulation at the 4 km scale and a much reduced conceptual gap between model resolution and parameterized processes.
A Framework for Simulating Turbine-Based Combined-Cycle Inlet Mode-Transition
NASA Technical Reports Server (NTRS)
Le, Dzu K.; Vrnak, Daniel R.; Slater, John W.; Hessel, Emil O.
2012-01-01
A simulation framework based on the Memory-Mapped-Files technique was created to operate multiple numerical processes in locked time-steps and send I/O data synchronously across to one-another to simulate system-dynamics. This simulation scheme is currently used to study the complex interactions between inlet flow-dynamics, variable-geometry actuation mechanisms, and flow-controls in the transition from the supersonic to hypersonic conditions and vice-versa. A study of Mode-Transition Control for a high-speed inlet wind-tunnel model with this MMF-based framework is presented to illustrate this scheme and demonstrate its usefulness in simulating supersonic and hypersonic inlet dynamics and controls or other types of complex systems.
A Goddard Multi-Scale Modeling System with Unified Physics
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2010-01-01
A multi-scale modeling system with unified physics has been developed at NASA Goddard Space Flight Center (GSFC). The system consists of an MMF, the coupled NASA Goddard finite-volume GCM (fvGCM) and Goddard Cumulus Ensemble model (GCE, a CRM); the state-of-the-art Weather Research and Forecasting model (WRF) and the stand alone GCE. These models can share the same microphysical schemes, radiation (including explicitly calculated cloud optical properties), and surface models that have been developed, improved and tested for different environments. In this talk, I will present: (1) A brief review on GCE model and its applications on the impact of the aerosol on deep precipitation processes, (2) The Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), and preliminary results (the comparison with traditional GCMs), and (3) A discussion on the Goddard WRF version (its developments and applications). We are also performing the inline tracer calculation to comprehend the ph ysical processes (i.e., boundary layer and each quadrant in the boundary layer) related to the development and structure of hurricanes and mesoscale convective systems.
Jones-Hughes, Tracey; Snowsill, Tristan; Haasova, Marcela; Coelho, Helen; Crathorne, Louise; Cooper, Chris; Mujica-Mota, Ruben; Peters, Jaime; Varley-Campbell, Jo; Huxley, Nicola; Moore, Jason; Allwood, Matt; Lowe, Jenny; Hyde, Chris; Hoyle, Martin; Bond, Mary; Anderson, Rob
2016-08-01
End-stage renal disease is a long-term irreversible decline in kidney function requiring renal replacement therapy: kidney transplantation, haemodialysis or peritoneal dialysis. The preferred option is kidney transplantation, followed by immunosuppressive therapy (induction and maintenance therapy) to reduce the risk of kidney rejection and prolong graft survival. To review and update the evidence for the clinical effectiveness and cost-effectiveness of basiliximab (BAS) (Simulect(®), Novartis Pharmaceuticals UK Ltd) and rabbit anti-human thymocyte immunoglobulin (rATG) (Thymoglobulin(®), Sanofi) as induction therapy, and immediate-release tacrolimus (TAC) (Adoport(®), Sandoz; Capexion(®), Mylan; Modigraf(®), Astellas Pharma; Perixis(®), Accord Healthcare; Prograf(®), Astellas Pharma; Tacni(®), Teva; Vivadex(®), Dexcel Pharma), prolonged-release tacrolimus (Advagraf(®) Astellas Pharma), belatacept (BEL) (Nulojix(®), Bristol-Myers Squibb), mycophenolate mofetil (MMF) (Arzip(®), Zentiva; CellCept(®), Roche Products; Myfenax(®), Teva), mycophenolate sodium (MPS) (Myfortic(®), Novartis Pharmaceuticals UK Ltd), sirolimus (SRL) (Rapamune(®), Pfizer) and everolimus (EVL) (Certican(®), Novartis) as maintenance therapy in adult renal transplantation. Clinical effectiveness searches were conducted until 18 November 2014 in MEDLINE (via Ovid), EMBASE (via Ovid), Cochrane Central Register of Controlled Trials (via Wiley Online Library) and Web of Science (via ISI), Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects and Health Technology Assessment (The Cochrane Library via Wiley Online Library) and Health Management Information Consortium (via Ovid). Cost-effectiveness searches were conducted until 18 November 2014 using a costs or economic literature search filter in MEDLINE (via Ovid), EMBASE (via Ovid), NHS Economic Evaluation Database (via Wiley Online Library), Web of Science (via ISI), Health Economic Evaluations Database (via Wiley Online Library) and the American Economic Association's electronic bibliography (via EconLit, EBSCOhost). Included studies were selected according to predefined methods and criteria. A random-effects model was used to analyse clinical effectiveness data (odds ratios for binary data and mean differences for continuous data). Network meta-analyses were undertaken within a Bayesian framework. A new discrete time-state transition economic model (semi-Markov) was developed, with acute rejection, graft function (GRF) and new-onset diabetes mellitus used to extrapolate graft survival. Recipients were assumed to be in one of three health states: functioning graft, graft loss or death. Eighty-nine randomised controlled trials (RCTs), of variable quality, were included. For induction therapy, no treatment appeared more effective than another in reducing graft loss or mortality. Compared with placebo/no induction, rATG and BAS appeared more effective in reducing biopsy-proven acute rejection (BPAR) and BAS appeared more effective at improving GRF. For maintenance therapy, no treatment was better for all outcomes and no treatment appeared most effective at reducing graft loss. BEL + MMF appeared more effective than TAC + MMF and SRL + MMF at reducing mortality. MMF + CSA (ciclosporin), TAC + MMF, SRL + TAC, TAC + AZA (azathioprine) and EVL + CSA appeared more effective than CSA + AZA and EVL + MPS at reducing BPAR. SRL + AZA, TAC + AZA, TAC + MMF and BEL + MMF appeared to improve GRF compared with CSA + AZA and MMF + CSA. In the base-case deterministic and probabilistic analyses, BAS, MMF and TAC were predicted to be cost-effective at £20,000 and £30,000 per quality-adjusted life-year (QALY). When comparing all regimens, only BAS + TAC + MMF was cost-effective at £20,000 and £30,000 per QALY. For included trials, there was substantial methodological heterogeneity, few trials reported follow-up beyond 1 year, and there were insufficient data to perform subgroup analysis. Treatment discontinuation and switching were not modelled. High-quality, better-reported, longer-term RCTs are needed. Ideally, these would be sufficiently powered for subgroup analysis and include health-related quality of life as an outcome. Only a regimen of BAS induction followed by maintenance with TAC and MMF is likely to be cost-effective at £20,000-30,000 per QALY. This study is registered as PROSPERO CRD42014013189. The National Institute for Health Research Health Technology Assessment programme.
Jones-Hughes, Tracey; Snowsill, Tristan; Haasova, Marcela; Coelho, Helen; Crathorne, Louise; Cooper, Chris; Mujica-Mota, Ruben; Peters, Jaime; Varley-Campbell, Jo; Huxley, Nicola; Moore, Jason; Allwood, Matt; Lowe, Jenny; Hyde, Chris; Hoyle, Martin; Bond, Mary; Anderson, Rob
2016-01-01
BACKGROUND End-stage renal disease is a long-term irreversible decline in kidney function requiring renal replacement therapy: kidney transplantation, haemodialysis or peritoneal dialysis. The preferred option is kidney transplantation, followed by immunosuppressive therapy (induction and maintenance therapy) to reduce the risk of kidney rejection and prolong graft survival. OBJECTIVES To review and update the evidence for the clinical effectiveness and cost-effectiveness of basiliximab (BAS) (Simulect(®), Novartis Pharmaceuticals UK Ltd) and rabbit anti-human thymocyte immunoglobulin (rATG) (Thymoglobulin(®), Sanofi) as induction therapy, and immediate-release tacrolimus (TAC) (Adoport(®), Sandoz; Capexion(®), Mylan; Modigraf(®), Astellas Pharma; Perixis(®), Accord Healthcare; Prograf(®), Astellas Pharma; Tacni(®), Teva; Vivadex(®), Dexcel Pharma), prolonged-release tacrolimus (Advagraf(®) Astellas Pharma), belatacept (BEL) (Nulojix(®), Bristol-Myers Squibb), mycophenolate mofetil (MMF) (Arzip(®), Zentiva; CellCept(®), Roche Products; Myfenax(®), Teva), mycophenolate sodium (MPS) (Myfortic(®), Novartis Pharmaceuticals UK Ltd), sirolimus (SRL) (Rapamune(®), Pfizer) and everolimus (EVL) (Certican(®), Novartis) as maintenance therapy in adult renal transplantation. METHODS Clinical effectiveness searches were conducted until 18 November 2014 in MEDLINE (via Ovid), EMBASE (via Ovid), Cochrane Central Register of Controlled Trials (via Wiley Online Library) and Web of Science (via ISI), Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects and Health Technology Assessment (The Cochrane Library via Wiley Online Library) and Health Management Information Consortium (via Ovid). Cost-effectiveness searches were conducted until 18 November 2014 using a costs or economic literature search filter in MEDLINE (via Ovid), EMBASE (via Ovid), NHS Economic Evaluation Database (via Wiley Online Library), Web of Science (via ISI), Health Economic Evaluations Database (via Wiley Online Library) and the American Economic Association's electronic bibliography (via EconLit, EBSCOhost). Included studies were selected according to predefined methods and criteria. A random-effects model was used to analyse clinical effectiveness data (odds ratios for binary data and mean differences for continuous data). Network meta-analyses were undertaken within a Bayesian framework. A new discrete time-state transition economic model (semi-Markov) was developed, with acute rejection, graft function (GRF) and new-onset diabetes mellitus used to extrapolate graft survival. Recipients were assumed to be in one of three health states: functioning graft, graft loss or death. RESULTS Eighty-nine randomised controlled trials (RCTs), of variable quality, were included. For induction therapy, no treatment appeared more effective than another in reducing graft loss or mortality. Compared with placebo/no induction, rATG and BAS appeared more effective in reducing biopsy-proven acute rejection (BPAR) and BAS appeared more effective at improving GRF. For maintenance therapy, no treatment was better for all outcomes and no treatment appeared most effective at reducing graft loss. BEL + MMF appeared more effective than TAC + MMF and SRL + MMF at reducing mortality. MMF + CSA (ciclosporin), TAC + MMF, SRL + TAC, TAC + AZA (azathioprine) and EVL + CSA appeared more effective than CSA + AZA and EVL + MPS at reducing BPAR. SRL + AZA, TAC + AZA, TAC + MMF and BEL + MMF appeared to improve GRF compared with CSA + AZA and MMF + CSA. In the base-case deterministic and probabilistic analyses, BAS, MMF and TAC were predicted to be cost-effective at £20,000 and £30,000 per quality-adjusted life-year (QALY). When comparing all regimens, only BAS + TAC + MMF was cost-effective at £20,000 and £30,000 per QALY. LIMITATIONS For included trials, there was substantial methodological heterogeneity, few trials reported follow-up beyond 1 year, and there were insufficient data to perform subgroup analysis. Treatment discontinuation and switching were not modelled. FUTURE WORK High-quality, better-reported, longer-term RCTs are needed. Ideally, these would be sufficiently powered for subgroup analysis and include health-related quality of life as an outcome. CONCLUSION Only a regimen of BAS induction followed by maintenance with TAC and MMF is likely to be cost-effective at £20,000-30,000 per QALY. STUDY REGISTRATION This study is registered as PROSPERO CRD42014013189. FUNDING The National Institute for Health Research Health Technology Assessment programme. PMID:27578428
NASA Technical Reports Server (NTRS)
Cheng, Anning; Xu, Kuan-Man
2015-01-01
Five-year simulation experiments with a multi-scale modeling Framework (MMF) with a advanced intermediately prognostic higher-order turbulence closure (IPHOC) in its cloud resolving model (CRM) component, also known as SPCAM-IPHOC (super parameterized Community Atmospheric Model), are performed to understand the fast tropical (30S-30N) cloud response to an instantaneous doubling of CO2 concentration with SST held fixed at present-day values. SPCAM-IPHOC has substantially improved the low-level representation compared with SPCAM. It is expected that the cloud responses to greenhouse warming in SPCAM-IPHOC is more realistic. The change of rising motion, surface precipitation, cloud cover, and shortwave and longwave cloud radiative forcing in SPCAM-IPHOC from the greenhouse warming will be presented in the presentation.
Down-regulation of multiple low dose streptozotocin-induced diabetes by mycophenolate mofetil
MAKSIMOVIC-IVANIC, D; TRAJKOVIC, V; MILJKOVIC, DJ; STOJKOVIC, M MOSTARICA; STOSIC-GRUJICIC, S
2002-01-01
The new immunosuppressive agent mycophenolate mofetil (MMF) has been shown recently to exert a protective effects in certain animal models of autoimmunity, including diabetes in diabetes-prone bio-breeding (BB) rats. In the present study, the immunomodulatory potential of MMF was investigated in autoimmune diabetes induced by multiple low doses of streptozotocin (MLD-STZ) in genetically susceptible DA rats 20 mg STZ/kg body weight (b.w.) for 5 days] and CBA/H mice (40 mg STZ/kg b.w. for 5 days). In both species, short time treatment of animals with MMF (25 mg/kg) during the early development of the disease, as well as continuous MMF treatment, prevented the appearance of hyperglycaemia and inflammatory infiltrates in the pancreatic tissue. Moreover, clinical manifestations of diabetes were suppressed by application of the drug after the onset of clinical symptoms. Treatment with guanosine (1 mg/kg) in parallel with MMF completely reversed MMF activity in vivo, indicating that inhibition of inosine monophosphate dehydrogenase (IMPDH) was responsible for the observed suppressive effects. MMF-mediated protection from diabetes correlated with reduced ex vivo spontaneous spleen mononuclear cell (MNC) proliferation and defective adhesive cell interactions. MMF-treated animals also had lower local production of IFN-γ, as well as IL-12 and nitric oxide (NO) production by peripheral tissues (spleen and peritoneal cells), compared to that in control diabetic groups, while IL-10 level was elevated. Together, these data demonstrate that MMF interferes with autoimmune process in streptozotocin-induced diabetes at multiple levels, including lymphocyte proliferation and adhesion, as well as pro/anti-inflammatory cytokine balance. PMID:12165076
A Goddard Multi-Scale Modeling System with Unified Physics
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2010-01-01
A multi-scale modeling system with unified physics has been developed at NASA Goddard Space Flight Center (GSFC). The system consists of an MMF, the coupled NASA Goddard finite-volume GCM (fvGCM) and Goddard Cumulus Ensemble model (GCE, a CRM); the state-of-the-art Weather Research and Forecasting model (WRF) and the stand alone GCE. These models can share the same microphysical schemes, radiation (including explicitly calculated cloud optical properties), and surface models that have been developed, improved and tested for different environments. In this talk, I will present: (1) A brief review on GCE model and its applications on the impact of the aerosol on deep precipitation processes, (2) The Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), and preliminary results (the comparison with traditional GCMs), and (3) A discussion on the Goddard WRF version (its developments and applications). We are also performing the inline tracer calculation to comprehend the physical processes (i.e., boundary layer and each quadrant in the boundary layer) related to the development and structure of hurricanes and mesoscale convective systems. In addition, high - resolution (spatial. 2km, and temporal, I minute) visualization showing the model results will be presented.
NASA Astrophysics Data System (ADS)
Pritchard, M. S.; Kooperman, G. J.; Zhao, Z.; Wang, M.; Russell, L. M.; Somerville, R. C.; Ghan, S. J.
2011-12-01
Evaluating the fidelity of new aerosol physics in climate models is confounded by uncertainties in source emissions, systematic error in cloud parameterizations, and inadequate sampling of long-range plume concentrations. To explore the degree to which cloud parameterizations distort aerosol processing and scavenging, the Pacific Northwest National Laboratory (PNNL) Aerosol-Enabled Multi-Scale Modeling Framework (AE-MMF), a superparameterized branch of the Community Atmosphere Model Version 5 (CAM5), is applied to represent the unusually active and well sampled North American wildfire season in 2004. In the AE-MMF approach, the evolution of double moment aerosols in the exterior global resolved scale is linked explicitly to convective statistics harvested from an interior cloud resolving scale. The model is configured in retroactive nudged mode to observationally constrain synoptic meteorology, and Arctic wildfire activity is prescribed at high space/time resolution using data from the Global Fire Emissions Database. Comparisons against standard CAM5 bracket the effect of superparameterization to isolate the role of capturing rainfall intermittency on the bulk characteristics of 2004 Arctic plume transport. Ground based lidar and in situ aircraft wildfire plume constraints from the International Consortium for Atmospheric Research on Transport and Transformation field campaign are used as a baseline for model evaluation.
Application of empirical and dynamical closure methods to simple climate models
NASA Astrophysics Data System (ADS)
Padilla, Lauren Elizabeth
This dissertation applies empirically- and physically-based methods for closure of uncertain parameters and processes to three model systems that lie on the simple end of climate model complexity. Each model isolates one of three sources of closure uncertainty: uncertain observational data, large dimension, and wide ranging length scales. They serve as efficient test systems toward extension of the methods to more realistic climate models. The empirical approach uses the Unscented Kalman Filter (UKF) to estimate the transient climate sensitivity (TCS) parameter in a globally-averaged energy balance model. Uncertainty in climate forcing and historical temperature make TCS difficult to determine. A range of probabilistic estimates of TCS computed for various assumptions about past forcing and natural variability corroborate ranges reported in the IPCC AR4 found by different means. Also computed are estimates of how quickly uncertainty in TCS may be expected to diminish in the future as additional observations become available. For higher system dimensions the UKF approach may become prohibitively expensive. A modified UKF algorithm is developed in which the error covariance is represented by a reduced-rank approximation, substantially reducing the number of model evaluations required to provide probability densities for unknown parameters. The method estimates the state and parameters of an abstract atmospheric model, known as Lorenz 96, with accuracy close to that of a full-order UKF for 30-60% rank reduction. The physical approach to closure uses the Multiscale Modeling Framework (MMF) to demonstrate closure of small-scale, nonlinear processes that would not be resolved directly in climate models. A one-dimensional, abstract test model with a broad spatial spectrum is developed. The test model couples the Kuramoto-Sivashinsky equation to a transport equation that includes cloud formation and precipitation-like processes. In the test model, three main sources of MMF error are evaluated independently. Loss of nonlinear multi-scale interactions and periodic boundary conditions in closure models were dominant sources of error. Using a reduced order modeling approach to maximize energy content allowed reduction of the closure model dimension up to 75% without loss in accuracy. MMF and a comparable alternative model peformed equally well compared to direct numerical simulation.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Xu, Kuan-Man; Cheng, Anning
As revealed from studies using conventional general circulation models (GCMs), the thermodynamic contribution to the tropical cloud feedback dominates the dynamic contribution, but these models have difficulty in simulating the subsidence regimes in the tropics. In this study, we analyze the tropical cloud feedback from a 2 K sea surface temperature (SST) perturbation experiment performed with a multiscale modeling framework (MMF). The MMF explicitly represents cloud processes using 2-D cloud-resolving models with an advanced higher-order turbulence closure in each atmospheric column of the host GCM. We sort the monthly mean cloud properties and cloud radiative effects according to circulation andmore » stability regimes. Here, we find that the regime-sorted dynamic changes dominate the thermodynamic changes in terms of the absolute magnitude. The dynamic changes in the weak subsidence regimes exhibit strong negative cloud feedback due to increases in shallow cumulus and deep clouds while those in strongly convective and moderate-to-strong subsidence regimes have opposite signs, resulting in a small contribution to cloud feedback. On the other hand, the thermodynamic changes are large due to decreases in stratocumulus clouds in the moderate-to-strong subsidence regimes with small opposite changes in the weak subsidence and strongly convective regimes, resulting in a relatively large contribution to positive cloud feedback. The dynamic and thermodynamic changes contribute equally to positive cloud feedback and are relatively insensitive to stability in the moderate-to-strong subsidence regimes. But they are sensitive to stability changes from the SST increase in convective and weak subsidence regimes. Lastly, these results have implications for interpreting cloud feedback mechanisms.« less
Xu, Kuan-Man; Cheng, Anning
2016-11-15
As revealed from studies using conventional general circulation models (GCMs), the thermodynamic contribution to the tropical cloud feedback dominates the dynamic contribution, but these models have difficulty in simulating the subsidence regimes in the tropics. In this study, we analyze the tropical cloud feedback from a 2 K sea surface temperature (SST) perturbation experiment performed with a multiscale modeling framework (MMF). The MMF explicitly represents cloud processes using 2-D cloud-resolving models with an advanced higher-order turbulence closure in each atmospheric column of the host GCM. We sort the monthly mean cloud properties and cloud radiative effects according to circulation andmore » stability regimes. Here, we find that the regime-sorted dynamic changes dominate the thermodynamic changes in terms of the absolute magnitude. The dynamic changes in the weak subsidence regimes exhibit strong negative cloud feedback due to increases in shallow cumulus and deep clouds while those in strongly convective and moderate-to-strong subsidence regimes have opposite signs, resulting in a small contribution to cloud feedback. On the other hand, the thermodynamic changes are large due to decreases in stratocumulus clouds in the moderate-to-strong subsidence regimes with small opposite changes in the weak subsidence and strongly convective regimes, resulting in a relatively large contribution to positive cloud feedback. The dynamic and thermodynamic changes contribute equally to positive cloud feedback and are relatively insensitive to stability in the moderate-to-strong subsidence regimes. But they are sensitive to stability changes from the SST increase in convective and weak subsidence regimes. Lastly, these results have implications for interpreting cloud feedback mechanisms.« less
NASA Astrophysics Data System (ADS)
Patel, Dhananjay; Singh, Vinay Kumar; Dalal, U. D.
2017-01-01
Single mode fibers (SMF) are typically used in Wide Area Networks (WAN), Metropolitan Area Networks (MAN) and also find applications in Radio over Fiber (RoF) architectures supporting data transmission in Fiber to the Home (FTTH), Remote Antenna Units (RAUs), in-building networks etc. Multi-mode fibers (MMFs) with low cost, ease of installation and low maintenance are predominantly (85-90%) deployed in-building networks providing data access in local area networks (LANs). The transmission of millimeter wave signals through the SMF in WAN and MAN, along with the reuse of MMF in-building networks will not levy fiber reinstallation cost. The transmission of the millimeter waves experiences signal impairments due to the transmitter non-linearity and modal dispersion of the MMF. The MMF exhibiting large modal dispersion limits the bandwidth-length product of the fiber. The second and higher-order harmonics present in the optical signal fall within the system bandwidth. This causes degradation in the received signal and an unwanted radiation of power at the RAU. The power of these harmonics is proportional to the non-linearity of the transmitter and the modal dispersion of the MMF and should be maintained below the standard values as per the international norms. In this paper, a mathematical model is developed for Second-order Harmonic Distortion (HD2) generated due to non-linearity of the transmitter and chromatic-modal dispersion of the SMF-MMF optic link. This is also verified using a software simulation. The model consists of a Mach Zehnder Modulator (MZM) that generates two m-QAM OFDM Single Sideband (SSB) signals based on phase shift of the hybrid coupler (90° and 120°). Our results show that the SSB signal with 120° hybrid coupler has suppresses the higher-order harmonics and makes the system more robust against the HD2 in the SMF-MMF optic link.
Ahuja, Manuj; Ammal Kaidery, Navneet; Yang, Lichuan; Calingasan, Noel; Smirnova, Natalya; Gaisin, Arsen; Gaisina, Irina N; Gazaryan, Irina; Hushpulian, Dmitry M; Kaddour-Djebbar, Ismail; Bollag, Wendy B; Morgan, John C; Ratan, Rajiv R; Starkov, Anatoly A; Beal, M Flint; Thomas, Bobby
2016-06-08
A promising approach to neurotherapeutics involves activating the nuclear-factor-E2-related factor 2 (Nrf2)/antioxidant response element signaling, which regulates expression of antioxidant, anti-inflammatory, and cytoprotective genes. Tecfidera, a putative Nrf2 activator, is an oral formulation of dimethylfumarate (DMF) used to treat multiple sclerosis. We compared the effects of DMF and its bioactive metabolite monomethylfumarate (MMF) on Nrf2 signaling and their ability to block 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced experimental Parkinson's disease (PD). We show that in vitro DMF and MMF activate the Nrf2 pathway via S-alkylation of the Nrf2 inhibitor Keap1 and by causing nuclear exit of the Nrf2 repressor Bach1. Nrf2 activation by DMF but not MMF was associated with depletion of glutathione, decreased cell viability, and inhibition of mitochondrial oxygen consumption and glycolysis rates in a dose-dependent manner, whereas MMF increased these activities in vitro However, both DMF and MMF upregulated mitochondrial biogenesis in vitro in an Nrf2-dependent manner. Despite the in vitro differences, both DMF and MMF exerted similar neuroprotective effects and blocked MPTP neurotoxicity in wild-type but not in Nrf2 null mice. Our data suggest that DMF and MMF exhibit neuroprotective effects against MPTP neurotoxicity because of their distinct Nrf2-mediated antioxidant, anti-inflammatory, and mitochondrial functional/biogenetic effects, but MMF does so without depleting glutathione and inhibiting mitochondrial and glycolytic functions. Given that oxidative damage, neuroinflammation, and mitochondrial dysfunction are all implicated in PD pathogenesis, our results provide preclinical evidence for the development of MMF rather than DMF as a novel PD therapeutic. Almost two centuries since its first description by James Parkinson, Parkinson's disease (PD) remains an incurable disease with limited symptomatic treatment. The current study provides preclinical evidence that a Food and Drug Administration-approved drug, dimethylfumarate (DMF), and its metabolite monomethylfumarate (MMF) can block nigrostriatal dopaminergic neurodegeneration in a 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine mouse model of PD. We elucidated mechanisms by which DMF and its active metabolite MMF activates the redox-sensitive transcription factor nuclear-factor-E2-related factor 2 (Nrf2) to upregulate antioxidant, anti-inflammatory, mitochondrial biosynthetic and cytoprotective genes to render neuroprotection via distinct S-alkylating properties and depletion of glutathione. Our data suggest that targeting Nrf2-mediated gene transcription using MMF rather than DMF is a promising approach to block oxidative stress, neuroinflammation, and mitochondrial dysfunction for therapeutic intervention in PD while minimizing side effects. Copyright © 2016 the authors 0270-6474/16/366333-20$15.00/0.
Gonwa, Thomas; Johnson, Christopher; Ahsan, Nasimul; Alfrey, Edward J; Halloran, Philip; Stegall, Mark; Hardy, Mark; Metzger, Robert; Shield, Charles; Rocher, Leslie; Scandling, John; Sorensen, John; Mulloy, Laura; Light, Jimmy; Corwin, Claudia; Danovitch, Gabriel; Wachs, Michael; VanVeldhuisen, Paul; Leonhardt, Maryanne; Fitzsimmons, William E
2003-06-27
Two hundred twenty-three recipients of first cadaveric kidney allografts were randomized to receive tacrolimus (TAC) + mycophenolate mofetil (MMF), TAC + azathioprine (AZA), or cyclosporine (Neoral; CsA) + MMF. All regimens contained corticosteroids, and antibody induction was used only in patients who experienced delayed graft function (DGF). Patients were followed-up for 3 years. The results at 3 years corroborate and extend the findings of the 2-year results. Patients with DGF treated with TAC+MMF experienced an increase in 3-year allograft survival compared with patients receiving CsA+MMF (84.1% vs. 49.9%, P=0.02). Patients randomized to either treatment arm containing TAC exhibited numerically superior kidney function when compared with CsA. During the 3 years, new-onset insulin dependence occurred in 6, 3, and 11 patients in the TAC+MMF, CsA+MMF, and TAC+AZA treatment arms, respectively. Furthermore, patients randomized to TAC+MMF received significantly lower doses of MMF as compared with those who received CsA+MMF. All three immunosuppressive regimens provided excellent safety and efficacy. However, the best results overall were achieved with TAC+MMF. The combination may provide particular benefit to kidney allograft recipients with DGF. In patients who experienced DGF, graft survival was better at 3 years in those patients receiving TAC in combination with either MMF or AZA as compared with the patients receiving CsA with MMF.
NASA Technical Reports Server (NTRS)
Wong, R. C.; Owen, H. A., Jr.; Wilson, T. G.
1981-01-01
Small-signal models are derived for the power stage of the voltage step-up (boost) and the current step-up (buck) converters. The modeling covers operation in both the continuous-mmf mode and the discontinuous-mmf mode. The power stage in the regulated current step-up converter on board the Dynamics Explorer Satellite is used as an example to illustrate the procedures in obtaining the small-signal functions characterizing a regulated converter.
Hambach, L; Stadler, M; Dammann, E; Ganser, A; Hertenstein, B
2002-06-01
Mycophenolate mofetil (MMF) is increasingly used for prophylaxis and therapy of GVHD in allogeneic stem cell transplantation. In some recent reports of use of MMF in solid organ transplantation a high incidence of CMV disease has been described. We evaluated the frequency and course of active CMV infection in patients who received MMF compared to those who did not receive MMF after allogeneic stem cell transplantation. We retrospectively analyzed 48 adult patients who consecutively underwent unmanipulated allogeneic bone marrow (n = 15) or peripheral stem cell transplantation (n = 33) from HLA-compatible family donors (n = 30) or unrelated donors (n = 18) from February 1997 to September 2000 at our institution. Only patients who were evaluable for the first 100 days were included in this analysis. Sixteen patients received MMF post transplant (MMF+). CMV-antigenemia was monitored by CMV-pp65 antigen. CMV-antigenemia occurred in 14 patients and was virtually only observed in CMV-IgG+ recipients (13/23, 56%). CMV-IgG+/MMF+ patients developed a higher incidence of CMV-antigenemia (8/9, 89%) compared to the CMV-IgG+/MMF- patients (5/14, 35%; P < 0.05). Moreover, five of six patients with persistent or recurrent CMV-antigenemia received MMF. No patient in either group developed CMV disease or died of CMV-related complications. In multivariate analysis including MMF treatment, unrelated vs related donor, GVHD, CMV-serostatus of the donor and stem cell graft type, only MMF treatment was found to be a significant risk factor for both overall and complicated CMV infection.
NASA Astrophysics Data System (ADS)
Tao, Wei-Kuo; Chern, Jiun-Dar
2017-06-01
The importance of precipitating mesoscale convective systems (MCSs) has been quantified from TRMM precipitation radar and microwave imager retrievals. MCSs generate more than 50% of the rainfall in most tropical regions. MCSs usually have horizontal scales of a few hundred kilometers (km); therefore, a large domain with several hundred km is required for realistic simulations of MCSs in cloud-resolving models (CRMs). Almost all traditional global and climate models do not have adequate parameterizations to represent MCSs. Typical multiscale modeling frameworks (MMFs) may also lack the resolution (4 km grid spacing) and domain size (128 km) to realistically simulate MCSs. The impact of MCSs on precipitation is examined by conducting model simulations using the Goddard Cumulus Ensemble (GCE, a CRM) model and Goddard MMF that uses the GCEs as its embedded CRMs. Both models can realistically simulate MCSs with more grid points (i.e., 128 and 256) and higher resolutions (1 or 2 km) compared to those simulations with fewer grid points (i.e., 32 and 64) and low resolution (4 km). The modeling results also show the strengths of the Hadley circulations, mean zonal and regional vertical velocities, surface evaporation, and amount of surface rainfall are weaker or reduced in the Goddard MMF when using more CRM grid points and higher CRM resolution. In addition, the results indicate that large-scale surface evaporation and wind feedback are key processes for determining the surface rainfall amount in the GMMF. A sensitivity test with reduced sea surface temperatures shows both reduced surface rainfall and evaporation.
Songkram, Chalermkiat
2016-01-01
Mycophenolate mofetil (MMF) is a prodrug of mycophenolic acid (MPA) which can be metabolized by esterase. MMF has been approved by the United States Food and Drug Administration (USFDA) for treatment of psoriasis patient with skin symptoms. However, it remains unclear whether MMF is efficiently effective to treat skin symptoms developed from psoriasis. The insufficient amount of MMF penetrating through the skin results in the treatment failure due to the difficulty in MMF penetration through the stratum corneum. Skin permeation enhancers such as eucalyptol (EUL) and N-methyl-2-pyrrolidone (NMP) potentially aid in increasing skin penetration. This study aimed to investigate the effects of a concentration ratio (% w/v) between two enhancers (EUL and NMP). The results showed that EUL enhanced MMF permeation with an enhancement ratio (ER) of 3.44 while NMP was not able to promote the penetration of MMF. Interestingly, the synergistic effect of the two enhancers was observed with a suitable ratio given that the ER was 8.21. EUL and NMP are promising enhancers for the development of MMF based skin product. PMID:27069715
Loechelt, Brett J; Boulware, David; Green, Michael; Baden, Lindsey R; Gottlieb, Peter; Krause-Steinrauf, Heidi; Weinberg, Adriana
2013-01-01
We assessed the morbidity of herpesviruses in patients with type 1 diabetes mellitus (T1D) enrolled in immunosuppressive treatment studies. Epstein-Barr virus (EBV), cytomegalovirus (CMV), herpes simplex virus (HSV), and varicella zoster virus (VZV) infections were monitored in 126 participants of a randomized, double-blind, placebo-controlled study of daclizumab (DZB) and mycophenolate mofetil (MMF) including DZB(+)MMF(+), DZB(-)MMF(+), DZB(+)MMF(-), and DZB(-)MMF(-). During the 2-year follow-up, herpesviral infections were monitored clinically, by serology and blood DNA polymerase chain reaction. Among 57 baseline EBV-seronegative participants, 9 developed EBV primary infections, including 2 with infectious mononucleosis syndrome. There were no appreciable differences in the course of the primary EBV infections across treatment groups. Among 69 baseline EBV-seropositive participants, 22 had virologic reactivations, including 1 symptomatic DZB(-)MMF(+) subject. Compared with 7 DZB(-)MMF(-) EBV reactivators, the 9 DZB(+)MMF(+) reactivators tended to have more prolonged viremia (11.4 vs 4.4 months; P = .06) and higher cumulative viral burden (14.2 vs 12.5 log EBV copies/mL; P = .06). Four of 85 baseline CMV-seronegative subjects developed asymptomatic primary CMV infections. There were no CMV reactivations. Of 30 baseline HSV-seropositive subjects, 8 developed ≥1 episode of herpes labialis; 1 subject had a primary HSV infection; and 1 subject without baseline serology information had a new diagnosis of genital HSV. There were no significant differences in the incidence of HSV recurrences across treatment groups. Of 100 baseline VZV-seropositive subjects, 1 DZB(-)MMF(-) subject developed herpes zoster and 1 DZB(-)MMF(+) subject had Bell's palsy possibly related to VZV. The use of DZB alone or in combination with MMF was not associated with increased morbidity due to herpesviruses. NCT00100178.
Optical fiber curvature sensor based on MMF-SCF-MMF structure
NASA Astrophysics Data System (ADS)
Wang, Qi; Liu, Yu
2018-07-01
A sensitive curvature sensor based on MMF-SCF-MMF (MMF: multimode fiber; SCF: seven core fiber) structure is proposed. The multimode fiber (MMF) are used to improve the light coupling efficiency between the input singlemode fiber (SMF) and the seven-core fiber (SCF), and the seven-core fiber is used as the main element for curvature measurement. Experimental results show that the best curvature sensitivity reaches 41.46453 nm/m-1 in the range of 0.094 m-1-0.567 m-1. The temperature sensitivity is up to 59.02 pm/°C in the range of 20 °C-55 °C. The optical curvature sensors are widely used for buildings structure health monitoring and mechanical engineering due to the advantages of compact structure, anti-electromagnetic interference, and low cost.
Fundamental-mode MMF transmission enabled by mode conversion
NASA Astrophysics Data System (ADS)
Wu, Zhongying; Li, Juhao; Tian, Yu; Ge, Dawei; Zhu, Jinglong; Ren, Fang; Mo, Qi; Yu, Jinyi; Li, Zhengbin; Chen, Zhangyuan; He, Yongqi
2018-03-01
Modal dispersion in conventional multi-mode fiber (MMF) will cause serious signal degradation and an effective solution is to restrict the signal transmission in the fundamental mode of MMF. In this paper, unlike previous methods by filtering out higher-order modes, we propose to adopt low-modal-crosstalk mode converters to realize fundamental-mode MMF transmission. We design and fabricate all-fiber mode-selective couplers (MSC), which perform mode conversion between the fundamental mode in single-mode fiber (SMF) and fundamental mode in MMF. The proposed scheme is experimentally compared with center launching method under different MMF links and then its wavelength division multiplexing (WDM) transmission performance is investigated. Experimental results indicate that the proposed mode conversion scheme could achieve better transmission performance and works well for the whole C-band.
NASA Astrophysics Data System (ADS)
Han, Ming
In this dissertation, detailed and systematic theoretical and experimental study of low-finesse extrinsic Fabry-Perot interferometric (EFPI) fiber optic sensors together with their signal processing methods for white-light systems are presented. The work aims to provide a better understanding of the operational principle of EFPI fiber optic sensors, and is useful and important in the design, optimization, fabrication and application of single mode fiber(SMF) EFPI (SMF-EFPI) and multimode fiber (MMF) EFPI (MMF-EFPI) sensor systems. The cases for SMF-EFPI and MMF-EFPI sensors are separately considered. In the analysis of SMF-EFPI sensors, the light transmitted in the fiber is approximated by a Gaussian beam and the obtained spectral transfer function of the sensors includes an extra phase shift due to the light coupling in the fiber end-face. This extra phase shift has not been addressed by previous researchers and is of great importance for high accuracy and high resolution signal processing of white-light SMF-EFPI systems. Fringe visibility degradation due to gap-length increase and sensor imperfections is studied. The results indicate that the fringe visibility of a SMF-EFPI sensor is relatively insensitive to the gap-length change and sensor imperfections. Based on the spectral fringe pattern predicated by the theory of SMF-EFPI sensors, a novel curve fitting signal processing method (Type 1 curve-fitting method) is presented for white-light SMF-EFPI sensor systems. Other spectral domain signal processing methods including the wavelength-tracking, the Type 2-3 curve fitting, Fourier transform, and two-point interrogation methods are reviewed and systematically analyzed. Experiments were carried out to compare the performances of these signal processing methods. The results have shown that the Type 1 curve fitting method achieves high accuracy, high resolution, large dynamic range, and the capability of absolute measurement at the same time, while others either have less resolution, or are not capable of absolute measurement. Previous mathematical models for MMF-EFPI sensors are all based on geometric optics; therefore their applications have many limitations. In this dissertation, a modal theory is developed that can be used in any situations and is more accurate. The mathematical description of the spectral fringes of MMF-EFPI sensors is obtained by the modal theory. Effect on the fringe visibility of system parameters, including the sensor head structure, the fiber parameters, and the mode power distribution in the MMF of the MMF-EFPI sensors, is analyzed. Experiments were carried out to validate the theory. Fundamental mechanism that causes the degradation of the fringe visibility in MMF-EFPI sensors are revealed. It is shown that, in some situations at which the fringe visibility is important and difficult to achieve, a simple method of launching the light into the MMF-EFPI sensor system from the output of a SMF could be used to improve the fringe visibility and to ease the fabrication difficulties of MMF-EFPI sensors. Signal processing methods that are well-understood in white-light SMF-EFPI sensor systems may exhibit new aspects when they are applied to white-light MMF-EFPI sensor systems. This dissertation reveals that the variations of mode power distribution (MPD) in the MMF could cause phase variations of the spectral fringes from a MMF-EFPI sensor and introduce measurement errors for a signal processing method in which the phase information is used. This MPD effect on the wavelength-tracking method in white-light MMF-EFPI sensors is theoretically analyzed. The fringe phases changes caused by MPD variations were experimentally observed and thus the MFD effect is validated.
Moreso, F; Serón, D; Morales, J M; Cruzado, J M; Gil-Vernet, S; Pérez, J L; Fulladosa, X; Andrés, A; Grinyó, J M
1998-06-01
Mycophenolate mofetil (MMF) combined with conventional cyclosporine and steroids doses efficiently prevents acute rejection in kidney transplants. However, this regimen has been associated with an increased incidence of cytomegalovirus (CMV) disease and leukopenia, specially in patients receiving MMF at 3 g/d, suggesting that the combination of two powerful immunosuppressants carries the risk of overimmunosuppression. For this reason, we treated a group of patients with MMF 3 g/d combined with low cyclosporine and steroids doses. Eighty-two kidney transplants performed at two centers and enrolled in the European Mycophenolate Mofetil Cooperative Study were randomized to receive: A) placebo (n = 27); B) MMF 2 g/d (n = 27); and C) MMF 3 g/d (n = 28). In this double blind study all patients received cyclosporine and steroids at conventional doses. Fifteen kidney transplants enrolled in an MMF open pharmacokinetic study were treated with MMF 3 g/day combined with low cyclosporine and steroid doses (group D). Efficacy was evaluated as the incidence of biopsy proven acute rejection, and safety focused on CMV disease and leukopenia. Patients receiving MMF showed a low incidence of biopsy proven rejection (B) 18.5%; C) 10.7%; and D) 13.3%). Patients of group C had a high incidence of CMV disease (35.7%) when compared with the other groups (lower than 8%). Incidence of leukopenia was higher in patients treated with MMF (B) 25.9%; C) 39.3%; and D) 40%) than in placebo treated patients (7.4%). Patients in group (C) displayed leukopenia mainly in the context of CMV disease, while patients of group (D) had leukopenia not related to CMV infection. All patients of group (D) who presented leukopenia recovered after MMF reduction dose, while in group (C) there were 5 out of 28 patients who required MMF withdrawal. We propose that a reasonable approach to take advantage of a powerful non-nephrotoxic immunosuppressant such as MMF, could be the administration of this drug at 3 g/d from the time of transplantation combined with low CsA and steroid doses.
NASA Astrophysics Data System (ADS)
Vieira, Diana; Nunes, João; Prats, Sergio; Serpa, Dalila; Keizer, Jan
2016-04-01
Wildfires have become a recurrent threat for many forest ecosystems of the Mediterranean. The characteristics of the Mediterranean climate with its warm and dry summers and mild and wet winters make it prone to wildfire occurrence as well as to post-fire soil erosion. Furthermore, climate change and continuation of current land management practices and planning are generally expected to further increase this threat. The wide recognition of the effects of wildfires to enhance runoff and erosion has created a strong demand for model-based tools for predicting the post-fire hydrological and erosion response and, in particular, for predicting the effectiveness of post-fire forestry operations to mitigate these responses. Such a tool should allow to identify areas with elevated risks of soil erosion and to evaluate which measures should be applied and when to minimize these risks. A key element in evaluating these measures is also their costs, in order to optimize the use of the limited resources that are typically available for post-fire land management. In this study, two "treatments" are compared with control conditions (i.e. doing nothing) after a wildfire with a moderate soil burn severity: (i) 4 erosion plots were treated with hydro-mulch, (ii) 4 erosion plots were untreated but had a high pine needle cover quickly after the fire, due to needle cast from scorched pine crowns (often referred to as "natural mulching") (iii) 4 plots were untreated and had a very reduced protective litter cover . The main objective of this study was to asses if the revised MMF model could effectively predict the impacts of hydro-mulching and natural mulching with pine needle on runoff generation and the associated soil losses. If MMF could predict well the impact of natural mulching, it could be very useful in limiting the areas that should be considered for specific soil mitigation measures, especially in the case of wildfires that affect large areas with moderate severity. The revised MMF model allowed, in fact, accurate predictions of runoff and soil erosion over the first year following hydro-mulch application . The obtained efficiency indices (Nash Sutcliffe Efficiency) of 0.82 and 0.71 for runoff and erosion, respectively, suggested that the revised MMF model could be at the base of a tool to assist decision-making in post-fire forest management. Furthermore, the MMF results obtained for hydro-mulching agreed well with those obtained in a previous study in the region for mulching with forest residues (Vieira et al., 2014). Ongoing work is assessing the possible improvements in model predictions by applying MMF on a seasonal basis and/or taking into account the occurrence of soil water repellency, i.e. using the adjustments of MMF to post-fire conditions as proposed in Vieira et al. (2014) and so far only tested - successfully - for eucalypt plantations in the study region. Vieira DCS, Prats SA, Nunes JP, Shakesby RA, Coelho COA, Keizer JJ (2014) Modelling runoff and erosion, and their mitigation, in burned Portuguese forest using the revised Morgan-Morgan-Finney model. Forest Ecology and Management 314: 150-165
Blaheta, R A; Leckel, K; Wittig, B; Zenker, D; Oppermann, E; Harder, S; Scholz, M; Weber, S; Schuldes, H; Encke, A; Markus, B H
1998-12-01
The novel immunosuppressive drug mycophenolate mofetil (CellCept, MMF) blocks DNA-synthesis by the inhibition of the enzyme inosine monophosphate dehydrogenase (IMDH). IMDH is also involved in the synthesis of adhesion receptors which are known to play an important role in the regulation of cell-cell contacts. Therefore, application of MMF might lead to a reduction of cellular infiltrates in the course of transplant rejection. To evaluate the therapeutic value of MMF, we investigated to what extent MMF blocks T-lymphocyte infiltration in vitro with regard to (a) adhesion to endothelial cells, (b) horizontal migration along these cells and (c) penetration through the endothelial cells. The results demonstrated a strong inhibition of both CD4+ and CD8+ T-cell adhesion and penetration by MMF. The ID50 value for CD4+ T-cell adhesion was calculated to be 0.03 microM and the ID50 value for CD4+ T-cell penetration 1.21 microM. MMF did not significantly influence the horizontal migration of T-lymphocytes along the human vascular endothelial cell (HUVEC) borders. FACS-analysis revealed a diminished E-selectin and P-selectin expression on endothelial cell membranes in the presence of MMF. Although MMF did not interfere with the synthesis of T-cell adhesion ligands, the binding activity of lymphocytic leucocyte function associated antigen 1 (LFA-1), very late antigen 4 (VLA-4) and PSGL-1 (P-selectin glycoprotein ligand 1) to immobilized intercellular adhesion molecule 1 (ICAM-1), vascular cell adhesion molecule 1 (VCAM-1) and P-selectin was impaired. Moreover, MMF prevented VLA-4 and PSGL-1 receptor accumulation on the membranes of T-cell pseudopodia. It can be concluded that MMF possesses potent infiltration blocking properties. MMF evoked down-regulation of specific endothelial membrane molecules and the loss of protein localization in the lymphocyte protrusions might be predominantly responsible for the observed blockade of cell adhesion and penetration.
Zaza, Gianluigi; Dalla Gassa, Alessandra; Felis, Giovanna; Granata, Simona; Torriani, Sandra; Lupo, Antonio
2017-01-01
The gut microbiome is the full set of microbes living in the gastrointestinal tract and is emerging as an important dynamic/fluid system that, if altered by environmental, dietetic or pharmacological factors, could considerably influence drug response. However, the immunosuppressive drug-induced modifications of this system are still poorly defined. We employed an innovative bioinformatics approach to assess differences in the whole-gut microbial metagenomic profile of 20 renal transplant recipients undergoing maintenance treatment with two different immunosuppressive protocols. Nine patients were treated with everolimus plus mycophenolate mofetil (EVE+MMF group), and 11 patients were treated with a standard therapy with tacrolimus plus mycophenolate mofetil (TAC+MMF group). A statistical analysis of comparative high-throughput data demonstrated that although similar according to the degree of Shannon diversity (alpha diversity) at the taxonomic level, three functional genes clearly discriminated EVE+MMF versus TAC+MMF (cutoff: log2 fold change≥1, FDR≤0.05). Flagellar motor switch protein (fliNY) and type IV pilus assembly protein pilM (pilM) were significantly enriched in TAC+MMF-treated patients, while macrolide transport system mrsA (msrA) was more abundant in patients treated with EVE+MMF. Finally, PERMANOVA revealed that among the variables analyzed and included in our model, only the consumption of sugar significantly influenced beta diversity. Our study, although performed on a relatively small number of patients, showed, for the first time, specific immunosuppressive-related effects on fecal microbiome of renal transplant recipients and it suggested that the analysis of the gut microbes community could represent a new tool to better understand the effects of drugs currently employed in organ transplantations. However, multicenter studies including healthy controls should be undertaken to better address this objective.
FEMME- post-Fire Emergency ManageMEnt tool.
NASA Astrophysics Data System (ADS)
Vieira, Diana; Serpa, Dalila; Rocha, João; Nunes, João; Keizer, Jacob
2017-04-01
Wildfires can have important impacts on hydrological and soil erosion processes in forest catchments, due to the destruction of vegetation cover and changes to soil properties. The involved processes however, are non-linear and not fully understood. This has severely limited the understanding on the impacts of wildfires, and, as a consequence, current runoff-erosion models are poorly adapted to recently burned forest conditions. Furthermore, while post-fire forestry operations and, to a lesser extent, post-fire soil conservation measures are commonly applied, their hydrological and erosion impacts continue poorly known, hampering decision-making by land owners and managers. Past post-wildfire research in Portugal has involved simple adaptations of plot-scale runoff-erosion models to post-fire conditions. This follow-up study focusses on model adaptation to selected post-fire soil conservation measures. To this end, full stock is taken of various datasets collected by several (past and ongoing research projects. The selected model is the Morgan-Morgan-Finney model (MMF, Morgan,2001), which already proved its suitability for post-fire conditions in Portugal (Vieira et al, 2010, 2014) as well as NW-Spain ( Fernández et al., 2010). The present results concerned runoff and erosion different burn severities and various post-fire mitigation treatments (mulch, hydromulch, needle cast, barriers), focussing on the plot and field scale. The results for both the first and the second year following the wildfire revealed good model efficiency, not only for burned and untreated conditions but also for burned and treated conditions. These results thus reinforced earlier findings that MMF is a suitable model for the envisaged post-fire soil erosion assessment tool, coined "FEMME". The data used for post-fire soil erosion calibration with the MMF already allows the delineation of the post-fire management FEMME tool. Nevertheless, further model assessment will address additional post-fire forestry operations (e.g. plowing) as well as upscaling to the catchment scale with the MMF model and compare it with the SWAT model.
Mycophenolate Mofetil and Pulmonary Fibrosis After Kidney Transplantation: A Case Report.
Takahashi, Kazuhiro; Go, Pauline; Stone, Chad H; Safwan, Mohamed; Putchakayala, Krishna G; Kane, William J; Malinzak, Lauren E; Kim, Dean Y; Denny, Jason E
2017-04-14
BACKGROUND Mycophenolate mofetil (MMF) induced lung disease has been described in only a few isolated reports. We report a case of fatal respiratory failure associated with MMF after kidney transplantation. CASE REPORT A 50-year-old Hispanic male with a history of end-stage renal disease secondary to hypertension underwent deceased donor kidney transplantation. His preoperative evaluations were normal except for a chest x-ray which showed bilateral interstitial opacities. Tacrolimus and MMF were started on the day of surgery. His postoperative course was uneventful and he was discharged on postoperative day 5. One month later, he presented with shortness of breath and a cough with blood-tinged sputum. His respiratory condition deteriorated rapidly, requiring intubation. Chest computer tomography (CT) demonstrated patchy ground-glass opacities with interlobular septal thickening. Comprehensive pulmonary, cardiac, infectious, and immunological evaluations were all negative. Open lung biopsy revealed extensive pulmonary fibrosis with no evidence of infection. He temporarily improved after discontinuation of tacrolimus and MMF, however, on resuming MMF his respiratory status deteriorated again and he subsequently died from hypoxic respiratory failure. CONCLUSIONS An awareness of pulmonary lung disease due to MMF is important to prevent adverse outcomes after organ transplantation. MMF must be used with utmost care in recipients with underlying lung disease as their pulmonary condition might make them more susceptible to any harmful effects of MMF.
Zhang, Yongfeng; Zheng, Yi
2014-12-01
The association of Pneumocystis jirovecii pneumonia (PJP) with connective tissue disease (CTD) and mycophenolate mofetil's (MMF) potent activity against PJP have been separately reported. Until now, there have been no papers describing the occurrence of PJP following MMF treatment in CTD patients. The objective of this study was to describe the clinical features, risk factors, outcomes of PJP in patients with CTD and investigates the effects of MMF on the occurrence of PJP in China. In this retrospective cohort study, we performed a chart review, analyzing clinical features, treatment, and outcomes of PJP in patients with CTD in a single hospital. A total of 17 cases met the inclusion criteria of having PJP and a CTD diagnosis: systemic lupus erythematosus; polymyositis; dermatomyositis; rheumatoid arthritis; Wegener's granulomatosis; and microscopic polyangiitis. Sixteen patients were treated with glucocorticoids (GCs) plus immunosuppressive drugs. Only one patient had GCs without immunosuppressive drugs. Ten subjects (62.5 %) received MMF (1-1.5 g/day), and all ten had lymphopenia. The mortality rates of MMF and non-MMF patients were 50 and 14 %, respectively. This study is the first report of PJP following MMF plus GC treatment in patients with CTD. CTD itself may be a risk factor for PJP. When CTD patients receiving MMF therapy have low lymphocyte counts and/or CD4 lymphocyte counts <250/µL, we should be care of occurrence of PJP.
NASA Astrophysics Data System (ADS)
Fathy, Alaa; Sabry, Yasser M.; Khalil, Diaa A.
2017-10-01
Multimode fibers (MMF) have many applications in illumination, spectroscopy, sensing and even in optical communication systems. In this work, we present a model for the MMF output field assuming the fiber end as a quasi-homogenous source. The fiber end is modeled by a group of partially coherent elementary sources, spatially shifted and uncorrelated with each other. The elementary source distribution is derived from the far field intensity measurement, while the weighting function of the sources is derived from the fiber end intensity measurement. The model is compared with practical measurements for fibers with different core/cladding diameters at different propagation distances and for different input excitations: laser, white light and LED. The obtained results show normalized root mean square error less than 8% in the intensity profile in most cases, even when the fiber end surface is not perfectly cleaved. Also, the comparison with the Gaussian-Schell model results shows a better agreement with the measurement. In addition, the complex degree of coherence, derived from the model results, is compared with the theoretical predictions of the modified Van Zernike equation showing very good agreement, which strongly supports the assumption that the large core MMF could be considered as a quasi-homogenous source.
Evaluation of a Cloud Resolving Model Using TRMM Observations for Multiscale Modeling Applications
NASA Technical Reports Server (NTRS)
Posselt, Derek J.; L'Ecuyer, Tristan; Tao, Wei-Kuo; Hou, Arthur Y.; Stephens, Graeme L.
2007-01-01
The climate change simulation community is moving toward use of global cloud resolving models (CRMs), however, current computational resources are not sufficient to run global CRMs over the hundreds of years necessary to produce climate change estimates. As an intermediate step between conventional general circulation models (GCMs) and global CRMs, many climate analysis centers are embedding a CRM in each grid cell of a conventional GCM. These Multiscale Modeling Frameworks (MMFs) represent a theoretical advance over the use of conventional GCM cloud and convection parameterizations, but have been shown to exhibit an overproduction of precipitation in the tropics during the northern hemisphere summer. In this study, simulations of clouds, precipitation, and radiation over the South China Sea using the CRM component of the NASA Goddard MMF are evaluated using retrievals derived from the instruments aboard the Tropical Rainfall Measuring Mission (TRMM) satellite platform for a 46-day time period that spans 5 May - 20 June 1998. The NASA Goddard Cumulus Ensemble (GCE) model is forced with observed largescale forcing derived from soundings taken during the intensive observing period of the South China Sea Monsoon Experiment. It is found that the GCE configuration used in the NASA Goddard MMF responds too vigorously to the imposed large-scale forcing, accumulating too much moisture and producing too much cloud cover during convective phases, and overdrying the atmosphere and suppressing clouds during monsoon break periods. Sensitivity experiments reveal that changes to ice cloud microphysical parameters have a relatively large effect on simulated clouds, precipitation, and radiation, while changes to grid spacing and domain length have little effect on simulation results. The results motivate a more detailed and quantitative exploration of the sources and magnitude of the uncertainty associated with specified cloud microphysical parameters in the CRM components of MMFs.
Mycophenolate mofetil attenuates pulmonary arterial hypertension in rats
DOE Office of Scientific and Technical Information (OSTI.GOV)
Suzuki, Chihiro; Takahashi, Masafumi; Morimoto, Hajime
Pulmonary arterial hypertension (PAH) is characterized by abnormal proliferation of smooth muscle cells (SMCs), leading to occlusion of pulmonary arterioles, right ventricular (RV) hypertrophy, and death. We investigated whether mycophenolate mofetil (MMF), a potent immunosuppresssant, prevents the development of monocrotaline (MCT)-induced PAH in rats. MMF effectively decreased RV systolic pressure and RV hypertrophy, and reduced the medial thickness of pulmonary arteries. MMF significantly inhibited the number of proliferating cell nuclear antigen (PCNA)-positive cells, infiltration of macrophages, and expression of P-selectin and interleukin-6 on the endothelium of pulmonary arteries. The infiltration of T cells and mast cells was not affected bymore » MMF. In vitro experiments revealed that mycophenolic acid (MPA), an active metabolite of MMF, dose-dependently inhibited proliferation of human pulmonary arterial SMCs. MMF attenuated the development of PAH through its anti-inflammatory and anti-proliferative properties. These findings provide new insight into the potential role of immunosuppressants in the treatment of PAH.« less
NASA Astrophysics Data System (ADS)
Li, Yifan; Liang, Xihui; Lin, Jianhui; Chen, Yuejian; Liu, Jianxin
2018-02-01
This paper presents a novel signal processing scheme, feature selection based multi-scale morphological filter (MMF), for train axle bearing fault detection. In this scheme, more than 30 feature indicators of vibration signals are calculated for axle bearings with different conditions and the features which can reflect fault characteristics more effectively and representatively are selected using the max-relevance and min-redundancy principle. Then, a filtering scale selection approach for MMF based on feature selection and grey relational analysis is proposed. The feature selection based MMF method is tested on diagnosis of artificially created damages of rolling bearings of railway trains. Experimental results show that the proposed method has a superior performance in extracting fault features of defective train axle bearings. In addition, comparisons are performed with the kurtosis criterion based MMF and the spectral kurtosis criterion based MMF. The proposed feature selection based MMF method outperforms these two methods in detection of train axle bearing faults.
2013-05-01
specifics of the correlation will be explored followed by discussion of new paradigms— the ordered event list (OEL) and the decision tree — that result from...4.2.1 Brief Overview of the Decision Tree Paradigm ................................................15 4.2.2 OEL Explained...6 Figure 3. A depiction of a notional fault/activation tree . ................................................................7
The Manhattan Frame Model-Manhattan World Inference in the Space of Surface Normals.
Straub, Julian; Freifeld, Oren; Rosman, Guy; Leonard, John J; Fisher, John W
2018-01-01
Objects and structures within man-made environments typically exhibit a high degree of organization in the form of orthogonal and parallel planes. Traditional approaches utilize these regularities via the restrictive, and rather local, Manhattan World (MW) assumption which posits that every plane is perpendicular to one of the axes of a single coordinate system. The aforementioned regularities are especially evident in the surface normal distribution of a scene where they manifest as orthogonally-coupled clusters. This motivates the introduction of the Manhattan-Frame (MF) model which captures the notion of an MW in the surface normals space, the unit sphere, and two probabilistic MF models over this space. First, for a single MF we propose novel real-time MAP inference algorithms, evaluate their performance and their use in drift-free rotation estimation. Second, to capture the complexity of real-world scenes at a global scale, we extend the MF model to a probabilistic mixture of Manhattan Frames (MMF). For MMF inference we propose a simple MAP inference algorithm and an adaptive Markov-Chain Monte-Carlo sampling algorithm with Metropolis-Hastings split/merge moves that let us infer the unknown number of mixture components. We demonstrate the versatility of the MMF model and inference algorithm across several scales of man-made environments.
A Goddard Multi-Scale Modeling System with Unified Physics
NASA Technical Reports Server (NTRS)
Tao, W.K.; Anderson, D.; Atlas, R.; Chern, J.; Houser, P.; Hou, A.; Lang, S.; Lau, W.; Peters-Lidard, C.; Kakar, R.;
2008-01-01
Numerical cloud resolving models (CRMs), which are based the non-hydrostatic equations of motion, have been extensively applied to cloud-scale and mesoscale processes during the past four decades. Recent GEWEX Cloud System Study (GCSS) model comparison projects have indicated that CRMs agree with observations in simulating various types of clouds and cloud systems from different geographic locations. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that Numerical Weather Prediction (NWP) and regional scale model can be run in grid size similar to cloud resolving model through nesting technique. Current and future NASA satellite programs can provide cloud, precipitation, aerosol and other data at very fine spatial and temporal scales. It requires a coupled global circulation model (GCM) and cloud-scale model (termed a szrper-parameterization or multi-scale modeling -framework, MMF) to use these satellite data to improve the understanding of the physical processes that are responsible for the variation in global and regional climate and hydrological systems. The use of a GCM will enable global coverage, and the use of a CRM will allow for better and more sophisticated physical parameterization. NASA satellite and field campaign can provide initial conditions as well as validation through utilizing the Earth Satellite simulators. At Goddard, we have developed a multi-scale modeling system with unified physics. The modeling system consists a coupled GCM-CRM (or MMF); a state-of-the-art weather research forecast model (WRF) and a cloud-resolving model (Goddard Cumulus Ensemble model). In these models, the same microphysical schemes (2ICE, several 3ICE), radiation (including explicitly calculated cloud optical properties), and surface models are applied. In addition, a comprehensive unified Earth Satellite simulator has been developed at GSFC, which is designed to fully utilize the multi-scale modeling system. A brief review of the multi-scale modeling system with unified physics/simulator and examples is presented in this article.
He, Hong; Ding, Hui; Liao, Aiping; Liu, Qiong; Yang, Jun; Zhong, Xingwu
2010-10-01
To investigate the effects of mycophenolate mofetil (MMF) on proliferation and mucin-5AC (MUC5AC) mRNA expression of normal human conjunctival goblet cells (CGCs) in vitro and to understand mechanisms of MMF in treatment of dry eye syndrome at molecular level. Purified human CGCs were treated with a series of graded concentrations of MMF after being confirmed by immunocytochemistry and flow cytometry. Proliferation and MUC5AC mRNA expression of CGCs were measured by Cell Count Kit-8 (CCK-8) and quantitative nested real-time reverse transcription polymerase chain reaction (QNRT-PCR at 24 h after treatment. The cell proliferation and MUC5AC mRNA expressiion were compared among different doses of MMF. MMF induced a dose-dependent upregulation of MUC5AC mRNA expression (F=238.851, p<0.01) but a biphase effect on proliferation of the CGCs over 24 h of co-incubation. This biphase effect manifested as a dose-dependent increase in cell numbers with MMF from 0.25 to 2.5 ng/ml, an unchanged population of the cells from 2.5 to 10 ng/ml and a reduced population of the cells from 25 to 100 ng/ml. MMF exerts biphase effects on cell regeneration and upregulates MUC5AC mRNA expression in CGCs in vitro. It appears that the use of MMF at low concentrations is attractive in dry eye (DE) treatment.
Gottlieb, Peter A; Quinlan, Scott; Krause-Steinrauf, Heidi; Greenbaum, Carla J; Wilson, Darrell M; Rodriguez, Henry; Schatz, Desmond A; Moran, Antoinette M; Lachin, John M; Skyler, Jay S
2010-04-01
This trial tested whether mycophenolate mofetil (MMF) alone or with daclizumab (DZB) could arrest the loss of insulin-producing beta-cells in subjects with new-onset type 1 diabetes. A multi-center, randomized, placebo-controlled, double-masked trial was initiated by Type 1 Diabetes TrialNet at 13 sites in North America and Europe. Subjects diagnosed with type 1 diabetes and with sufficient C-peptide within 3 months of diagnosis were randomized to either MMF alone, MMF plus DZB, or placebo, and then followed for 2 years. The primary outcome was the geometric mean area under the curve (AUC) C-peptide from the 2-h mixed meal tolerance test. One hundred and twenty-six subjects were randomized and treated during the trial. The geometric mean C-peptide AUC at 2 years was unaffected by MMF alone or MMF plus DZB versus placebo. Adverse events were more frequent in the active therapy groups relative to the control group, but not significantly. Neither MMF alone nor MMF in combination with DZB had an effect on the loss of C-peptide in subjects with new-onset type 1 diabetes. Higher doses or more targeted immunotherapies may be needed to affect the autoimmune process.
Gottlieb, Peter A.; Quinlan, Scott; Krause-Steinrauf, Heidi; Greenbaum, Carla J.; Wilson, Darrell M.; Rodriguez, Henry; Schatz, Desmond A.; Moran, Antoinette M.; Lachin, John M.; Skyler, Jay S.
2010-01-01
OBJECTIVE This trial tested whether mycophenolate mofetil (MMF) alone or with daclizumab (DZB) could arrest the loss of insulin-producing β-cells in subjects with new-onset type 1 diabetes. RESEARCH DESIGN AND METHODS A multi-center, randomized, placebo-controlled, double-masked trial was initiated by Type 1 Diabetes TrialNet at 13 sites in North America and Europe. Subjects diagnosed with type 1 diabetes and with sufficient C-peptide within 3 months of diagnosis were randomized to either MMF alone, MMF plus DZB, or placebo, and then followed for 2 years. The primary outcome was the geometric mean area under the curve (AUC) C-peptide from the 2-h mixed meal tolerance test. RESULTS One hundred and twenty-six subjects were randomized and treated during the trial. The geometric mean C-peptide AUC at 2 years was unaffected by MMF alone or MMF plus DZB versus placebo. Adverse events were more frequent in the active therapy groups relative to the control group, but not significantly. CONCLUSIONS Neither MMF alone nor MMF in combination with DZB had an effect on the loss of C-peptide in subjects with new-onset type 1 diabetes. Higher doses or more targeted immunotherapies may be needed to affect the autoimmune process. PMID:20067954
Dalla Gassa, Alessandra; Felis, Giovanna; Granata, Simona; Torriani, Sandra; Lupo, Antonio
2017-01-01
Background The gut microbiome is the full set of microbes living in the gastrointestinal tract and is emerging as an important dynamic/fluid system that, if altered by environmental, dietetic or pharmacological factors, could considerably influence drug response. However, the immunosuppressive drug-induced modifications of this system are still poorly defined. Methods We employed an innovative bioinformatics approach to assess differences in the whole-gut microbial metagenomic profile of 20 renal transplant recipients undergoing maintenance treatment with two different immunosuppressive protocols. Nine patients were treated with everolimus plus mycophenolate mofetil (EVE+MMF group), and 11 patients were treated with a standard therapy with tacrolimus plus mycophenolate mofetil (TAC+MMF group). Results A statistical analysis of comparative high-throughput data demonstrated that although similar according to the degree of Shannon diversity (alpha diversity) at the taxonomic level, three functional genes clearly discriminated EVE+MMF versus TAC+MMF (cutoff: log2 fold change≥1, FDR≤0.05). Flagellar motor switch protein (fliNY) and type IV pilus assembly protein pilM (pilM) were significantly enriched in TAC+MMF-treated patients, while macrolide transport system mrsA (msrA) was more abundant in patients treated with EVE+MMF. Finally, PERMANOVA revealed that among the variables analyzed and included in our model, only the consumption of sugar significantly influenced beta diversity. Conclusions Our study, although performed on a relatively small number of patients, showed, for the first time, specific immunosuppressive-related effects on fecal microbiome of renal transplant recipients and it suggested that the analysis of the gut microbes community could represent a new tool to better understand the effects of drugs currently employed in organ transplantations. However, multicenter studies including healthy controls should be undertaken to better address this objective. PMID:28542523
Capmany, J; Gasulla, Ivana
2007-08-20
Although a considerable number of multimode fiber (MMF) links operate in a wavelength region around 850 nm where chromatic dispersion of a given modal group mu is described adequately by the second derivative beta(mu) (2) of the propagation constant beta(mu)(omega), there is also an increasing interest in MMF links transmitting in the second spectral window (@1300nm) where this second derivative vanishes being thus necessary to consider the third derivative beta(mu) (3) in the evaluation of the transfer function of the multimode fiber link. We present in this paper, for the first time to our knowledge, an analytical model for the transfer function of a multimode fiber (MMF) optic link taken into account the impact of third-order dispersion. The model extends the operation of a previously reported one for second-order dispersion. Our results show that the performance of broadband radio over fiber transmission through middle-reach distances can be improved by working at the minimum-dispersion wavelength as long as low-linewidth lasers are employed.
Microphysics in Multi-scale Modeling System with Unified Physics
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2012-01-01
Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (1) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, a review of developments and applications of the multi-scale modeling system will be presented. In particular, the microphysics development and its performance for the multi-scale modeling system will be presented.
Cornelius, Carl-Peter; Ehrenfeld, Michael
2010-01-01
Mandibulo-maxillary fixation (MMF) screws are inserted into the bony base of both jaws in the process of fracture realignment and immobilisation. The screw heads act as anchor points to fasten wire loops or rubber bands connecting the mandible to the maxilla. Traditional interdental chain-linked wiring or arch bar techniques provide the anchorage by attached cleats, hooks, or eyelets. In comparison to these tooth-borne appliances MMF screws facilitate and shorten the way to achieve intermaxillary fixation considerably. In addition, MMF screws help to reduce the hazards of glove perforation and wire stick injuries. On the downside, MMF screws are attributed with the risk of tooth root damage and a lack of versatility beyond the pure maintenance of occlusion such as stabilizing loose teeth or splinting fragments of the alveolar process. The surgical technique of MMF screws as well as the pros and cons of the clinical application are reviewed. The adequate screw placement to prevent serious tooth root injuries is still an issue to rethink and modify conceptual guidelines. PMID:22110819
A Multithreaded Missions And Means Framework (MMF) Concept Report
2012-03-01
Vasconcelos , W.; Gibson, C.; Bar-Noy, A.; Borowiecki, K.; La Porta, T.; Pizzocaro, D.; Rowaihy, H.; Pearson, G.; Pham, T. An Ontology Centric...M.; de Mel, G.; Vasconcelos , W.; Sleeman, D.; Colley, S.; La Porta, T. An Ontology-Based Approach to Sensor-Mission Assignment. Proceedings of the...1st Annual Conference of the International Technology Alliance (ACITA 2007), 2007. Preece, A.; Gomez, M.; de Mel, G.; Vasconcelos , W.; Sleeman, D
Owen, Claire; Ngian, Gene-Siew; Elford, Kathleen; Moore, Owen; Stevens, Wendy; Nikpour, Mandana; Rabusa, Candice; Proudman, Susanna; Roddy, Janet; Zochling, Jane; Hill, Catherine; Sturgess, Allan; Tymms, Kathleen; Youssef, Peter; Sahhar, Joanne
2016-01-01
To report the efficacy and tolerability of mycophenolate mofetil (MMF) and azathioprine (AZA) in the management of systemic sclerosis-associated interstitial lung disease (SSc-ILD). Patients in the Australian Scleroderma Cohort Study treated with at least 3 months of MMF or AZA for SSc-ILD confirmed on high resolution computed tomography (HRCT) chest were identified and their pulmonary function tests (PFTs) retrieved. Individuals with available results for T-1 (12 months prior to treatment commencement), T0 (date of treatment commencement) and at least one subsequent time point were included in the drug efficacy analysis. The Wilcoxon signed-rank test was used to compare absolute FVC at T1, T0, 12 months (T1), 24 months (T2) and 36 months (T3). Analysis of drug tolerability included all identified patients treated with MMF or AZA. 18/22 patients treated with MMF and 29/49 treated with AZA had adequate PFTs for inclusion in the drug efficacy analysis. Median absolute FVC at T1 for MMF treatment was 2.50L, declining to 2.12L at T0 (p=0.02). Following MMF therapy, FVC results were stable at T1 (2.13L, p=0.86), T2 (2.17L, p=0.65) and T3 (2.25L, p=0.78). In the AZA group, a statistically significant decline did not occur prior to treatment, however FVC results remained stable at T1, T2 and T3.Adverse events leading to early discontinuation (<12 months treatment) were less common in the MMF group (4/22 vs. 13/49). Gastrointestinal complications were the main cause of discontinuation in both groups. In patients with SSc-ILD with declining pulmonary function, MMF therapy was associated with stability for up to 36 months. Early adverse events leading to discontinuation occurred less frequently in patients treated with MMF than in AZA treated patients.
Tacke, Sabine; Guth, Brian; Henke, Julia
2016-01-01
Guinea pigs (GPs) are difficult to anaesthetize successfully, the choices for anaesthesia are limited and physiological parameters are likely to be influenced substantially under anaesthesia. We implanted blood pressure radio-telemetry devices into 16 male GPs and subjected them to anaesthesia with ketamine-xylazine (KX), medetomidine-midazolam-fentanyl (MMF) or isoflurane (Iso, plus atropine premedication) in a randomized order with a 7 day interval between anaesthesias. Each anaesthesia lasted 40min, after which Iso was discontinued, MMF was fully antagonized with atipamezole-flumazenil-naloxone and KX was partially antagonized with atipamezole. Hemodynamics were recorded continuously for at least 240min after induction and the GPs were monitored for respiratory rate, reflex responses and specific observations until regaining of their righting reflex (RR). Blood for glucose testing was taken from the ear at 7.5, 20 and 40min during anaesthesia. Recovery time was short with MMF and Iso but long for KX. MMF induced only a transient blood pressure drop after antagonization, whereas Iso caused a marked hypotension during maintenance and KX led to moderate hypotension after antagonization. MMF and Iso produced tolerable heart rate changes, but KX led to long term post-anaesthetic bradycardia. Hypothermia occurred with all anaesthesias, but the GPs returned to normothermia the fastest under MMF, followed shortly by Iso. KX, however, caused a profound and prolonged hypothermia. The respiration was depressed with all anaesthesias, substantially with MMF (-41%) and KX (-52%) and severe during Iso maintenance (-71%). Blood glucose with MMF and KX increased throughout the anaesthesia, but the values remained within reference values with all anaesthetics. The reflex responses character and strength varied between the anaesthetics. In conclusion, MMF is the anaesthetic of choice and Iso may be used for short, non-painful procedures. We advise against the use of KX in GPs. PMID:27658033
Design and application of hybrid maxillomandibular fixation for facial bone fractures.
Park, Kang-Nam; Oh, Seung-Min; Lee, Chang-Youn; Kim, Jwa-Young; Yang, Byoung-Eun
2013-01-01
A novel maxillomandibular fixation (MMF) procedure using a skeletal anchorage screw (SAS) (in the maxilla) and an arch bar (in the mandible), which we call "hybrid maxillomandibular fixation," was explored in this study. The aims of the study were to examine the efficacy of our hybrid MMF method and to compare periodontal tissue health and occlusal rehabilitation among 3 MMF methods. In total, 112 patients who had undergone open reduction at the Department of Oral and Maxillofacial Surgery between September 2005 and December 2012 were selected for this study. The participants were assigned to one of the following groups: SAS (maxilla), SAS (mandible), SAS-arch bar, or arch bar-arch bar. Periodontal health was evaluated using the Gingival Index, and the perioperative occlusal reproducibility was evaluated using a score of 1 to 3. Statistical analysis was performed using parametric tests (Student t test or 1-way analysis of variance followed by post hoc Tukey test). In the Gingival Index comparison performed 1 month after the surgery, only the group using the arch bars and wiring was significantly different from the other groups (P < 0.05). The occlusal reproducibility scores were not significantly different. The pain and discomfort of the patients were reduced in the hybrid MMF group. The hybrid MMF takes advantage of MMF using both arch bars and SASs for mandibular fractures. In addition, it overcomes many problems presented by previous MMF methods.
Varnell, Charles D; Fukuda, Tsuyoshi; Kirby, Cassie L; Martin, Lisa J; Warshaw, Barry L; Patel, Hiren P; Chand, Deepa H; Barletta, Gina-Marie; Van Why, Scott K; VanDeVoorde, Rene G; Weaver, Donald J; Wilson, Amy; Verghese, Priya S; Vinks, Alexander A; Greenbaum, Larry A; Goebel, Jens; Hooper, David K
2017-11-01
MMF is commonly prescribed following kidney transplantation, yet its use is complicated by leukopenia. Understanding the genetics mediating this risk will help clinicians administer MMF safely. We evaluated 284 patients under 21 years of age for incidence and time course of MMF-related leukopenia and performed a candidate gene association study comparing the frequency of 26 SNPs between cases with MMF-related leukopenia and controls. We matched cases by induction, steroid duration, race, center, and age. We also evaluated the impact of induction and SNPs on time to leukopenia in all cases. Sixty-eight (24%) patients had MMF-related leukopenia, of which 59 consented for genotyping and 38 were matched with controls. Among matched pairs, no SNPs were associated with leukopenia. With non-depleting induction, UGT2B7-900A>G (rs7438135) was associated with increased risk of MMF-related leukopenia (P = .038). Time to leukopenia did not differ between patients by induction agent, but 2 SNPs (rs2228075, rs2278294) in IMPDH1 were associated with increased time to leukopenia. MMF-related leukopenia is common after transplantation. UGT2B7 may influence leukopenia risk especially in patients without lymphocyte-depleting induction. IMPDH1 may influence time course of leukopenia after transplant. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Gieβsing, Jùrgen; Fisher, James; Steele, James; Rothe, Frank; Raubold, Kristin; Eichmann, Björn
2016-03-01
This study examined low-volume resistance training (RT) in trained participants with and without advanced training methods. Trained participants (RT experience 4±3 years) were randomised to groups performing single-set RT: ssRM (N.=21) performing repetitions to self-determined repetition maximum (RM), ssMMF (N.=30) performing repetitions to momentary muscular failure (MMF), and ssRP (N.=28) performing repetitions to self-determined RM using a rest pause (RP) method. Each performed supervised RT twice/week for 10 weeks. Outcomes included maximal isometric strength and body composition using bioelectrical impedance analysis. The ssRM group did not significantly improve in any outcome. The ssMMF and ssRP groups both significantly improved strength (p < 0.05). Magnitude of changes using effect size (ES) was examined between groups. Strength ES's were considered large for ssMMF (0.91 to 1.57) and ranging small to large for ssRP (0.42 to 1.06). Body composition data revealed significant improvements (P<0.05) in muscle and fat mass and percentages for whole body, upper limbs and trunk for ssMMF, but only upper limbs for ssRP. Body composition ES's ranged moderate to large for ssMMF (0.56 to 1.27) and ranged small to moderate for ssRP (0.28 to 0.52). ssMMF also significantly improved (P<0.05) total abdominal fat and increased intracellular water with moderate ES's (-0.62 and 0.56, respectively). Training to self-determined RM is not efficacious for trained participants. Training to MMF produces greatest improvements in strength and body composition, however, RP style training does offer some benefit.
Mycophenolate mofetil increases adhesion capacity of tumor cells in vitro.
Blaheta, Roman A; Bogossian, Harilaos; Beecken, Wolf-Dietrich; Jonas, Dietger; Hasenberg, Christoph; Makarevic, Jasmina; Ogbomo, Henry; Bechstein, Wolf O; Oppermann, Elsie; Leckel, Kerstin; Cinatl, Jindrich
2003-12-27
The immunosuppressive drug mycophenolate mofetil (MMF) reduces expression of the heterophilic binding elements intercellular adhesion molecule-1 and vascular cell adhesion molecule-1 and thereby prevents attachment of alloactivated leukocytes to donor endothelium. The authors speculated that MMF might further diminish receptors of the immunoglobulin superfamily which, however, act as homophilic binding elements. Because decrease of homophilic adhesion receptors correlates with tumor dissemination and metastasis, MMF could trigger development or recurrence of neoplastic tumors. The authors analyzed the influence of MMF on homotypic adhesion receptors and its consequence for tumor cell attachment to an endothelial cell monolayer. Neuroblastoma (NB) cells, which self-aggregate by means of the homophilic-binding element neural cell adhesion molecule (NCAM), were used. Effects of MMF on the 140- and 180-kDa NCAM isoforms were investigated quantitatively by flow cytometry, Western blot, and reverse-transcriptase (RT) polymerase chain reaction (PCR). The relevance of NCAM for tumor cell binding was proven by treating NB with NCAM antisense oligonucleotides. MMF profoundly increased the number of adherent NB cells, with a maximum effect at 0.1 microM, compared with controls. Decrease of NCAM on the cell surface was detected by flow cytometry. Western blot and RT-PCR demonstrated reduced protein and RNA levels of the 140- and 180-kDa isoforms. Treatment of NB cells with NCAM antisense oligonucleotides showed that reduced NCAM expression leads to enhanced tumor cell adhesion. MMF decreases NCAM receptors, which is associated with enhanced tumor cell invasiveness. The authors conclude that an MMF-based immunosuppressive regimen might increase the risk of tumor metastasis if this process is predominantly conveyed by means of homophilic adhesion proteins.
Cerebral 18F-FDG PET in macrophagic myofasciitis: An individual SVM-based approach.
Blanc-Durand, Paul; Van Der Gucht, Axel; Guedj, Eric; Abulizi, Mukedaisi; Aoun-Sebaiti, Mehdi; Lerman, Lionel; Verger, Antoine; Authier, François-Jérôme; Itti, Emmanuel
2017-01-01
Macrophagic myofasciitis (MMF) is an emerging condition with highly specific myopathological alterations. A peculiar spatial pattern of a cerebral glucose hypometabolism involving occipito-temporal cortex and cerebellum have been reported in patients with MMF; however, the full pattern is not systematically present in routine interpretation of scans, and with varying degrees of severity depending on the cognitive profile of patients. Aim was to generate and evaluate a support vector machine (SVM) procedure to classify patients between healthy or MMF 18F-FDG brain profiles. 18F-FDG PET brain images of 119 patients with MMF and 64 healthy subjects were retrospectively analyzed. The whole-population was divided into two groups; a training set (100 MMF, 44 healthy subjects) and a testing set (19 MMF, 20 healthy subjects). Dimensionality reduction was performed using a t-map from statistical parametric mapping (SPM) and a SVM with a linear kernel was trained on the training set. To evaluate the performance of the SVM classifier, values of sensitivity (Se), specificity (Sp), positive predictive value (PPV), negative predictive value (NPV) and accuracy (Acc) were calculated. The SPM12 analysis on the training set exhibited the already reported hypometabolism pattern involving occipito-temporal and fronto-parietal cortices, limbic system and cerebellum. The SVM procedure, based on the t-test mask generated from the training set, correctly classified MMF patients of the testing set with following Se, Sp, PPV, NPV and Acc: 89%, 85%, 85%, 89%, and 87%. We developed an original and individual approach including a SVM to classify patients between healthy or MMF metabolic brain profiles using 18F-FDG-PET. Machine learning algorithms are promising for computer-aided diagnosis but will need further validation in prospective cohorts.
Knight, Richard J; Graviss, Edward A; Nguyen, Duc T; Kuten, Samantha A; Patel, Samir J; Gaber, Lillian; Gaber, A Osama
2018-04-19
We sought to determine whether conversion from tacrolimus/mycophenolate mofetil (TAC-MMF) into tacrolimus/mTOR inhibitor (TAC-mTOR) immunosuppression would reduce the incidences of BK and CMV viremia after kidney/pancreas (KP) transplantation. In this single-center review, the TAC-mTOR cohort (n = 39) was converted at 1 month post-transplant to an mTOR inhibitor and reduced-dose tacrolimus. Outcomes were compared to a cohort of KP recipients (n = 40) maintained on TAC-MMF. At 3 years post-transplant, KP survivals and incidences of kidney/pancreas rejection were equivalent between mTOR and MMF-treated cohorts. (P = ns). BK viremia-free survival was better for the mTOR vs MMF-treated group (P = .004). In multivariate analysis, MMF vs mTOR immunosuppression was an independent risk factor for BK viremia (hazard ratio 12.27, P = .02). Similarly, mTOR-treated recipients displayed better CMV infection-free survival compared to the MMF-treated cohort (P = .01). MMF vs mTOR immunosuppression (hazard ratio 18.77, P = .001) and older recipient age (hazard ratio 1.13 per year, P = .006) were independent risk factors for CMV viremia. Mean estimated GFR and HgbA1c levels were equivalent between groups at 1, 2, and 3 years post-transplantation. Conversion from TAC/MMF into TAC/mTOR immunosuppression after KP transplantation reduced the incidences of BK and CMV viremia with an equivalent risk of acute rejection and similar renal/pancreas function. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Gorgan, Maria; Bockorny, Bruno; Lawlor, Michael; Volpe, John; Fiel-Gan, Mary
2013-11-01
Immunosuppressive drugs are an integral part of therapy in organ transplantation. However, they are not without side effects, and although rare, these agents should be considered in the differential diagnosis of pulmonary complications in patients receiving transplants. We present a case of a patient who developed acute respiratory failure 7 days after orthotopic heart transplantation and who had been on both mycophenolate mofetil (MMF) and tacrolimus agents. Lung biopsy revealed features of pulmonary hemorrhage with capillaritis. Considered as a possible etiology, MMF was withdrawn. There was immediate improvement of the patient's symptoms. The temporal relationship between MMF exposure and onset of pulmonary symptoms in the absence of other possible etiologies strongly suggests a causal relationship. Previously published reports of pulmonary toxicity from MMF included interstitial fibrosis. To the best of our knowledge, this is the first reported case of pulmonary hemorrhage with capillaritis because of administration of MMF.
Desensitization to Mycofenolate Mofetil: a novel 12 step protocol.
Smith, M; Gonzalez-Estrada, A; Fernandez, J; Subramanian, A
2016-07-01
The use of MMF has become standard practice in many solid organ transplant recipients due its efficacy and favorable risk profile compared to other immunosuppressants. There has been a single case report of successful MMF desensitization. However, this protocol did not follow current Drug practice parameters. We report a successful desensitization to MMF in a double heart-kidney transplant recipient.
NASA Astrophysics Data System (ADS)
Ma, Chaojie; Di, Jianglei; Li, Ying; Xiao, Fajun; Zhang, Jiwei; Liu, Kaihui; Bai, Xuedong; Zhao, Jianlin
2018-06-01
We demonstrate, for the first time, the rotational memory effect of a multimode fiber (MMF) based on digital optical phase conjugation (DOPC) to achieve multiple-spot focusing. An implementation interferometer is used to address the challenging alignments in DOPC. By rotating the acquired phase conjugate pattern, rotational scanning through a MMF could be achieved by recording a single off-axis hologram. The generation of two focal spots through a MMF is also demonstrated by combining the rotational memory effect with the superposition principle. The results may be useful for ultrafast scanning imaging and optical manipulation of multiple objects through a MMF.
Physical and Chemical Stability of Mycophenolate Mofetil (MMF) Suspension Prepared at the Hospital
Fahimi, Fanak; Baniasadi, Shadi; Mortazavi, Seyed Alireza; Dehghan, Hanie; Zarghi, Afshin
2012-01-01
To evaluate the physical and chemical stability of a suspension of mycophenolate mofetil (MMF) prepared in the hospital from commercially available MMF capsules and tablets. Extemporaneous pharmacy was used as a feasible method in this experimental study to prepare suspension form of MMF. Suspension formulations were prepared from both tablets and capsules forms of MMF. Thereafter the stability parameters such as pH, microbial control, thermal and physical stability and particle sizes were evaluated. The amount of MMF, in the suspension was measured at various time points by HPLC. The HPLC method showed that concentration of suspensions prepared from tablets and capsules were 49 mg/mL and 50 mg/mL at time 0, respectively. The effective amount of suspensions prepared from capsules was 101% at time 0, 100% after 7 days, 98% after 14 days, and less than 70% after 28 days. According to the obtained results in this study, capsule-based suspension was stable for as long as 14 days at 5°C. This formulation appears to be clinically acceptable and provides a convenient dosage form for pediatric patients and for adults during the early postoperative period. PMID:24250439
Segovia, Javier; Gerosa, Gino; Almenar, Luis; Livi, Ugolino; Viganò, Mario; Arizón, Jose Maria; Yonan, Nizar; Di Salvo, Thomas G; Renlund, Dale G; Kobashigawa, Jon A
2008-01-01
Mycophenolic acid (MPA) dose reduction is associated with increased risk of rejection and graft loss in renal transplantation. This analysis investigated the impact of MPA dose changes with enteric-coated mycophenolate sodium (EC-MPS) or mycophenolate mofetil (MMF) in de novo heart transplant recipients. In a 12-month, single-blind trial, 154 patients (EC-MPS, 78; MMF, 76) were randomized to either EC-MPS (1080 mg bid) or MMF (1500 mg bid) in combination with cyclosporine and steroids. The primary efficacy variable was the incidence of treatment failure, comprising a composite of biopsy-proven (BPAR) and treated acute rejection, graft loss or death. Significantly fewer patients receiving EC-MPS required > or =2 dose reductions than patients on MMF (26.9% vs. 42.1% of patients, p = 0.048). Accordingly, the average daily dose of EC-MPS as a percentage of the recommended dose was significantly higher than for MMF (88.4% vs. 79.0%, p = 0.016). Among patients requiring > or =1 dose reduction, the incidence of treated BPAR grade > or =3A was significantly lower with EC-MPS compared with MMF (23.4% vs. 44.0%, p = 0.032). These data suggest that EC-MPS-treated heart transplant patients are less likely to require multiple dose reductions than those on MMF which may be associated with a significantly lower risk of treated BPAR > or =3A.
Molina Perez, E; Fernández Castroagudín, J; Seijo Ríos, S; Mera Calviño, J; Tomé Martínez de Rituerto, S; Otero Antón, E; Bustamante Montalvo, M; Varo Perez, E
2009-04-01
An increased incidence and magnitude of leukopenia during concomitant treatment with valganciclovir (VGC) and mycophenolate mofetil (MMF) has been reported. To evalute the incidence and severity of leukopenia and neutropenia among liver recipients treated with VGC and related factors. Retrospective analysis of clinical and analytical data related to leukopenia (<3000 leukocytes/mm(3)) and neutropenia (<900 neutrophils/mm(3)) in liver transplant patients who were treated with VGC from 2003 to 2007. We examined the influence of concomitant administration of MMF and development of subsequent infections. Among 209 liver transplants, 40 treatments with VGC were prescribed in 37 patients (17.7%), 12 of which (30%) were associated with MMF. The patients has an average age of 49.7 +/- 12.7, body mass index (BMI) of 27.28 +/- 5.17, and Model for End-stage Liver Disease Score (MELD) 12.45 +/- 7.5. The daily average dose of VGC was 1440 +/- 446.5 mg and MMF, 1454.5 +/- 350.3 mg. We observed a decrease of 30% in initial leukocyte count (5353.7 +/- 2706.6) and 40% in neutrophil count (3600 +/- 2182.1). With no relationship to total dose or BMI-adjusted dose of VGC nor concomitant administration of MMF. The initial leukocyte count was significantly lower (4411 +/- 1930 vs 6206 +/- 3053; P = .03) and underwent a main drop (2344.7 +/- 1974.3 vs 898.1 +/- 2435.6; P = .04) when leukopenia developed. In the induced neutropenia group, previous leukocyte count (3797.1 +/- 1223.9 vs 5683.9 +/- 2829.3; P = .01), MELD (18.7 +/- 8.8 vs 11.1 +/- 6.6; P = .01), and the creatinine pretreatment (1.44 +/- 0.4 vs 1.09 +/- 0.3; P = .01) were significantly different. Subsequent infections induced by the leukopenia were not observed. In our series, the concomitant use of VGC and MMF was not associated with a greater incidence of leukopenia and/or neutropenia than VGC administration alone. Previous leukocyte count was associated with them. MELD and renal dysfunction are factors related to severe neutropenia. Leukopenia was not associated with a greater incidence of infections.
Fumarate decreases edema volume and improves functional outcome after experimental stroke.
Clausen, Bettina Hjelm; Lundberg, Louise; Yli-Karjanmaa, Minna; Martin, Nellie Anne; Svensson, Martina; Alfsen, Maria Zeiler; Flæng, Simon Bertram; Lyngsø, Kristina; Boza-Serrano, Antonio; Nielsen, Helle H; Hansen, Pernille B; Finsen, Bente; Deierborg, Tomas; Illes, Zsolt; Lambertsen, Kate Lykke
2017-09-01
Oxidative stress and inflammation exacerbate tissue damage in the brain after ischemic stroke. Dimethyl-fumarate (DMF) and its metabolite monomethyl-fumarate (MMF) are known to stimulate anti-oxidant pathways and modulate inflammatory responses. Considering these dual effects of fumarates, we examined the effect of MMF treatment after ischemic stroke in mice. Permanent middle cerebral artery occlusion (pMCAO) was performed using adult, male C57BL/6 mice. Thirty minutes after pMCAO, 20mg/kg MMF was administered intravenously. Outcomes were evaluated 6, 24 and 48h after pMCAO. First, we examined whether a bolus of MMF was capable of changing expression of kelch-like erythroid cell-derived protein with CNC homology-associated protein 1 (Keap1) and nuclear factor erythroid 2-related factor (Nrf)2 in the infarcted brain. Next, we studied the effect of MMF on functional recovery. To explore mechanisms potentially influencing functional changes, we examined infarct volumes, edema formation, the expression of heat shock protein (Hsp)72, hydroxycarboxylic acid receptor 2 (Hcar2), and inducible nitric oxide synthase (iNOS) in the infarcted brain using real-time PCR and Western blotting. Concentrations of a panel of pro- and anti-inflammatory cytokines (IFNγ, IL-1β, IL-2, IL-4, IL-5, IL-6, IL-10, IL-12p70, TNF) were examined in both the infarcted brain tissue and plasma samples 6, 24 and 48h after pMCAO using multiplex electrochemoluminiscence analysis. Administration of MMF increased the protein level of Nrf2 6h after pMCAO, and improved functional outcome at 24 and 48h after pMCAO. MMF treatment did not influence infarct size, however reduced edema volume at both 24 and 48h after pMCAO. MMF treatment resulted in increased Hsp72 expression in the brain 6h after pMCAO. Hcar2 mRNA levels increased significantly 24h after pMCAO, but were not different between saline- and MMF-treated mice. MMF treatment also increased the level of the anti-inflammatory cytokine IL-10 in the brain and plasma 6h after pMCAO, and additionally reduced the level of the pro-inflammatory cytokine IL-12p70 in the brain at 24 and 48h after pMCAO. A single intravenous bolus of MMF improved sensory-motor function after ischemic stroke, reduced edema formation, and increased the levels of the neuroprotective protein Hsp72 in the brain. The early increase in IL-10 and reduction in IL-12p70 in the brain combined with changes in systemic cytokine levels may also contribute to the functional recovery after pMCAO. Copyright © 2017. Published by Elsevier Inc.
Li, Pengmei; Shuker, Nauras; Hesselink, Dennis A; van Schaik, Ron H N; Zhang, Xianglin; van Gelder, Teun
2014-10-01
Mycophenolate mofetil (MMF) is used to prevent acute rejection following solid organ transplantation in transplant centers all over the world. Patients from different ethnic backgrounds are treated with this drug, for which therapeutic drug monitoring (TDM) has not become the standard of practice in most centers. Whether or not some ethnic groups require a different MMF dose has been a topic of debate in recent years. In this review, it is shown that Asian patients, compared with Caucasian patients, with a comparable MMF dose reach higher mycophenolic acid (MPA) exposure. Also clinical experience points toward more adverse events in case of treatment with 1 g MMF bid in Asian patients, and therefore, for this ethnic group, a lower maintenance dose seems justified. In contrast, African American patients reach similar drug concentrations as Caucasians patients receiving the same MMF dose, but due to immunological reasons, they require a higher MMF dose to reach comparable acute rejection incidences. When TDM is performed, clinicians can correct the dose and compensate for interethnic differences in drug exposure. Otherwise, it is important to choose the right dose. This optimal dose is 20-46% lower in Asian transplant recipients than in Caucasian or African American patients. © 2014 Steunstichting ESOT.
Torres, Irina B; Reisaeter, Anna V; Moreso, Francesc; Âsberg, Anders; Vidal, Marta; Garcia-Carro, Clara; Midtvedt, Karsten; Reinholt, Finn P; Scott, Helge; Castellà, Eva; Salcedo, Maite; Dörje, Christina; Sellarés, Joana; Azancot, Maria A; Perello, Manel; Holdaas, Hallvard; Serón, Daniel
2017-11-01
The aim was to evaluate the relationship between maintenance immunosuppression, subclinical tubulo-interstitial inflammation and interstitial fibrosis/tubular atrophy (IF/TA) in surveillance biopsies performed in low immunological risk renal transplants at two transplant centers. The Barcelona cohort consisted of 109 early and 66 late biopsies in patients receiving high tacrolimus (TAC-C 0 target at 1-year 6-10 ng/ml) and reduced MMF dose (500 mg bid at 1-year). The Oslo cohort consisted of 262 early and 237 late biopsies performed in patients treated with low TAC-C 0 (target 3-7 ng/ml) and standard MMF dose (750 mg bid). Subclinical inflammation, adjusted for confounders, was associated with low TAC-C 0 in the early (OR: 0.75, 95% CI: 0.61-0.92; P = 0.006) and late biopsies (OR: 0.69, 95% CI: 0.50-0.95; P = 0.023) from Barcelona. In the Oslo cohort, it was associated with low MMF in early biopsies (OR: 0.90, 95% CI: 0.83-0.98; P = 0.0101) and with low TAC-C 0 in late biopsies (OR: 0.77, 95% CI: 0.61-0.97; P = 0.0286). MMF dose was significantly reduced in Oslo between early and late biopsies. IF/TA was not associated with TAC-C 0 or MMF dose in the multivariate analysis. Our data suggest that in TAC- and MMF-based regimens, TAC-C 0 levels are associated with subclinical inflammation in patients receiving reduced MMF dose. © 2017 Steunstichting ESOT.
Treatment outcomes in a cohort of patients with mucosal-predominant pemphigus vulgaris.
Ojaimi, S; O'Connor, K; Lin, M W; Schifter, M; Fulcher, D A
2015-03-01
Pemphigus vulgaris (PV) is a rare autoimmune blistering condition. Treatment typically combines corticosteroids with another immunosuppressive agent, such as azathioprine, mycophenolate mofetil (MMF) or rituximab. This study aims to compare these second agents for their clinical efficacy and steroid-sparing effect. This was a single-centre, retrospective observational cohort study of 21 patients with oral PV over a 6-year period, 18 of whom were newly diagnosed. Of the latter, the first 13 were initially given azathioprine, progressing to MMF and then rituximab on treatment failure, while the next five patients started directly on MMF. Of the 13 newly diagnosed patients, 2/13 were intolerant of azathioprine, and only 1/11 was controlled, with a median time to treatment failure (MTTF) of 254 days. MMF was given to 17 patients, either de novo (5) or after azathioprine (12), and was significantly more effective, controlling activity in 4/17 patients, and for a significantly longer time (MTTF 395 days, P = 0.019). All 13 patients failing MMF received rituximab, seven required a second dose, and three, a third dose. All patients responded, with 11/13 able to cease steroids. Control was maintained for a similar time to MMF (MTTF 364 days, P = NS). Rituximab also had the best steroid-sparing effect followed by MMF, then azathioprine. Side-effects were common with azathioprine, while the other two agents were well tolerated. Rituximab was the most effective of the three immunosuppressives for PV, although repeat dosing was frequently required. These observations have significant implications for the choice of drugs for this condition. © 2014 Royal Australasian College of Physicians.
Marzorati, Simona; Melzi, Raffaella; Citro, Antonio; Cantarelli, Elisa; Mercalli, Alessia; Scavini, Marina; Piemonti, Lorenzo
2014-05-27
Immunosuppression (IS) in islet transplantation (Tx) is a double-edged sword: it prevents immunoreaction but has the potential to impair islet engraftment. The aim of this study was to identify in murine animal models the IS platform with the best balance between these two opposite effects. To study the impact of IS on islet engraftment diabetic C57BL/6 mice were transplanted with 350 syngeneic islets through the portal vein and treated once-daily with either rapamycin (RAPA; 0.1-0.5-1 mg/kg ip), tacrolimus (FK506; 0.1-0.5-1 mg/kg ip), mycophenolate mofetil (MMF; 60-120-300 mg/kg oral) or vehicle for 14 days. Islet function was evaluated by measuring not-fasting glycemia and by performing an IVGTT on days 15 and 30 post-Tx. RAPA ≥0.5 mg/Kg, FK506 ≥0.5 mg/Kg, and MMF ≥120 mg/kg had detrimental effects on islet engraftment but not on the function of islets already engrafted in the liver. The effect on engraftment was irreversible and persisted even after IS withdrawal. The lower dose of IS that did not affect engraftment was tested for preventing rejection in the full mismatch allogeneic Tx BALB/c to C57BL/6 model. RAPA and/or FK506 were inefficient in preventing rejection, even when anti-IL2R mAb was added to the IS regimen. On the other hand, MMF alone or in association with FK506 significantly prolonged the time to islet rejection. IS showed profound dose-dependent deleterious effects on islet cell engraftment. The MMF/FK506 combination proved the best balance with less toxicity at the time of engraftment and more efficacy in controlling graft rejection.
Dong, Bo; Zhou, Da-Peng; Wei, Li; Liu, Wing-Ki; Lit, John W Y
2008-11-10
A novel lateral force sensor based on a core-offset multi-mode fiber (MMF) interferometer is reported. High extinction ratio can be obtained by misaligning a fused cross section between the single-mode fiber (SMF) and MMF. With the variation of the lateral force applied to a short section of the MMF, the extinction ratio changes while the interference phase remains almost constant. The change of the extinction ratio is independent of temperature variations. The proposed force sensor has the advantages of temperature- and phase-independency, high extinction ratio sensitivity, good repeatability, low cost, and simple structure. Moreover, the core-offset MMF interferometer is expected to have applications in fiber filters and tunable phase-independent attenuators.
Tacke, Sabine; Guth, Brian; Henke, Julia
2017-01-01
Repeated anaesthesia may be required in experimental protocols and in daily veterinary practice, but anaesthesia is known to alter physiological parameters in GPs (Cavia porcellus, GPs). This study investigated the effects of repeated anaesthesia with either medetomidine-midazolam-fentanyl (MMF) or isoflurane (Iso) on physiological parameters in the GP. Twelve GPs were repeatedly administered with MMF or Iso in two anaesthesia sets. One set consisted of six 40-min anaesthesias, performed over 3 weeks (2 per week); the anaesthetic used first was randomized. Prior to Iso anaesthesia, atropine was injected. MMF anaesthesia was antagonized with AFN (atipamezole-flumazenil-naloxone). Abdominally implanted radio-telemetry devices recorded the mean arterial blood pressure (MAP), heart rate (HR) and core body temperature continuously. Additionally, respiratory rate, blood glucose and body weight were assessed. An operable state could be achieved and maintained for 40 min in all GPs. During the surgical tolerance with MMF, the GPs showed a large MAP range between the individuals. In the MMF wake- up phase, the time was shortened until the righting reflex (RR) returned and that occurred at lower MAP and HR values. Repeated Iso anaesthesia led to an increasing HR during induction (anaesthesias 2–6), non-surgical tolerance (anaesthesias 3–6) and surgical tolerance (anaesthesias 4, 6). Both anaesthetics may be used repeatedly, as repeating the anaesthesias resulted in only slightly different physiological parameters, compared to those seen with single anaesthesias. The regular atropine premedication induced HR increases and repeated MMF anaesthesia resulted in a metabolism increase which led to the faster return of RR. Nevertheless, Iso’s anaesthesia effects of strong respiratory depression and severe hypotension remained. Based on this increased anaesthesia risk with Iso, MMF anaesthesia is preferable for repeated use in GPs. PMID:28328950
Schmitz, Sabrina; Tacke, Sabine; Guth, Brian; Henke, Julia
2017-01-01
Repeated anaesthesia may be required in experimental protocols and in daily veterinary practice, but anaesthesia is known to alter physiological parameters in GPs (Cavia porcellus, GPs). This study investigated the effects of repeated anaesthesia with either medetomidine-midazolam-fentanyl (MMF) or isoflurane (Iso) on physiological parameters in the GP. Twelve GPs were repeatedly administered with MMF or Iso in two anaesthesia sets. One set consisted of six 40-min anaesthesias, performed over 3 weeks (2 per week); the anaesthetic used first was randomized. Prior to Iso anaesthesia, atropine was injected. MMF anaesthesia was antagonized with AFN (atipamezole-flumazenil-naloxone). Abdominally implanted radio-telemetry devices recorded the mean arterial blood pressure (MAP), heart rate (HR) and core body temperature continuously. Additionally, respiratory rate, blood glucose and body weight were assessed. An operable state could be achieved and maintained for 40 min in all GPs. During the surgical tolerance with MMF, the GPs showed a large MAP range between the individuals. In the MMF wake- up phase, the time was shortened until the righting reflex (RR) returned and that occurred at lower MAP and HR values. Repeated Iso anaesthesia led to an increasing HR during induction (anaesthesias 2-6), non-surgical tolerance (anaesthesias 3-6) and surgical tolerance (anaesthesias 4, 6). Both anaesthetics may be used repeatedly, as repeating the anaesthesias resulted in only slightly different physiological parameters, compared to those seen with single anaesthesias. The regular atropine premedication induced HR increases and repeated MMF anaesthesia resulted in a metabolism increase which led to the faster return of RR. Nevertheless, Iso's anaesthesia effects of strong respiratory depression and severe hypotension remained. Based on this increased anaesthesia risk with Iso, MMF anaesthesia is preferable for repeated use in GPs.
NASA Astrophysics Data System (ADS)
Hosseini, Mohammadreza; Nunes, João Pedro; González Pelayo, Oscar; Keizer, Jan Jacob; Ritsema, Coen; Geissen, Violette
2017-04-01
Models can be valuable for foreseeing the hydrological effects of fires and to plan and execute post-fire management alternatives. In this study, the revised Morgan-Morgan-Finney (MMF) model was utilized to simulate runoff and soil erosion in recently burned maritime pine plantations with different fire regimes, in a wet Mediterranean area of north-central Portugal. The MMF model was adjusted for burned zones in order to accommodate seasonal patterns in runoff and soil erosion, attributed to changes in soil water repellency and vegetation recovery. The model was then assessed by applying it for a sum of 18 experimental micro-plots (0.25 m2) at 9 1x-burnt and 9 4x-burnt slopes, using both literature-based and calibrated parameters, with the collected data used to assess the robustness of each parameterization. The estimate of erosion was more exact than that of runoff, with a general Nash-Sutcliffe efficiency of 0.54. Slope angle and the soil's effective hydrological depth (which relies on upon vegetation and additionally crop cover) were found to be the primary parameters enhancing model results, and different hydrological depths were expected to separate between the two differentiating fire regimes. This relative analysis demonstrated that most existing benchmark parameters can be utilized to apply MMF in burnt pine regions with moderate severity to support post-fire management; however it also showed that further endeavours ought to concentrate on mapping soil depth and vegetation cover to enhance these simulations.
Hinchcliff, Monique; Toledo, Diana M; Taroni, Jaclyn N; Wood, Tammara A; Franks, Jennifer M; Ball, Michael S; Hoffmann, Aileen; Amin, Sapna M; Tan, Ainah U; Tom, Kevin; Nesbeth, Yolanda; Lee, Jungwha; Ma, Madeleine; Aren, Kathleen; Carns, Mary A; Pioli, Patricia A; Whitfield, Michael L
2018-01-31
Fewer than half of patients with systemic sclerosis demonstrate modified Rodnan skin score improvement during mycophenolate mofetil (MMF) treatment. To understand the molecular basis for this observation, we extended our prior studies and characterized molecular and cellular changes in skin biopsies from subjects with systemic sclerosis treated with MMF. Eleven subjects completed ≥24 months of MMF therapy. Two distinct skin gene expression trajectories were observed across six of these subjects. Three of the six subjects showed attenuation of the inflammatory signature by 24 months, paralleling reductions in CCL2 mRNA expression in skin and reduced numbers of macrophages and myeloid dendritic cells in skin biopsies. MMF cessation at 24 months resulted in an increased inflammatory score, increased CCL2 mRNA and protein levels, modified Rodnan skin score rebound, and increased numbers of skin myeloid cells in these subjects. In contrast, three other subjects remained on MMF >24 months and showed a persistent decrease in inflammatory score, decreasing or stable modified Rodnan skin score, CCL2 mRNA reductions, sera CCL2 protein levels trending downward, reduction in monocyte migration, and no increase in skin myeloid cell numbers. These data summarize molecular changes during MMF therapy that suggest reduction of innate immune cell numbers, possibly by attenuating expression of chemokines, including CCL2. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.
Development of a Cloud Resolving Model for Heterogeneous Supercomputers
NASA Astrophysics Data System (ADS)
Sreepathi, S.; Norman, M. R.; Pal, A.; Hannah, W.; Ponder, C.
2017-12-01
A cloud resolving climate model is needed to reduce major systematic errors in climate simulations due to structural uncertainty in numerical treatments of convection - such as convective storm systems. This research describes the porting effort to enable SAM (System for Atmosphere Modeling) cloud resolving model on heterogeneous supercomputers using GPUs (Graphical Processing Units). We have isolated a standalone configuration of SAM that is targeted to be integrated into the DOE ACME (Accelerated Climate Modeling for Energy) Earth System model. We have identified key computational kernels from the model and offloaded them to a GPU using the OpenACC programming model. Furthermore, we are investigating various optimization strategies intended to enhance GPU utilization including loop fusion/fission, coalesced data access and loop refactoring to a higher abstraction level. We will present early performance results, lessons learned as well as optimization strategies. The computational platform used in this study is the Summitdev system, an early testbed that is one generation removed from Summit, the next leadership class supercomputer at Oak Ridge National Laboratory. The system contains 54 nodes wherein each node has 2 IBM POWER8 CPUs and 4 NVIDIA Tesla P100 GPUs. This work is part of a larger project, ACME-MMF component of the U.S. Department of Energy(DOE) Exascale Computing Project. The ACME-MMF approach addresses structural uncertainty in cloud processes by replacing traditional parameterizations with cloud resolving "superparameterization" within each grid cell of global climate model. Super-parameterization dramatically increases arithmetic intensity, making the MMF approach an ideal strategy to achieve good performance on emerging exascale computing architectures. The goal of the project is to integrate superparameterization into ACME, and explore its full potential to scientifically and computationally advance climate simulation and prediction.
Mycophenolate Mofetil for the Treatment of Multiple Sclerosis-associated Uveitis.
Hedayatfar, Alireza; Falavarjani, Khalil Ghasemi; Soheilian, Masoud; Elmi Sadr, Navid; Modarres, Mehdi; Parvaresh, Mohammad Mehdi; Naseripour, Masood; Rohani, Mohammad; Almasi, Mostafa; Chee, Soon-Phaik
2017-06-01
To report the efficacy of mycophenolate mofetil (MMF) as adjunctive therapy for the treatment of multiple sclerosis (MS)-associated uveitis. In this retrospective, interventional case series, patients with MS-associated uveitis who were treated by MMF as an adjunct therapy to systemic corticosteroid were studied. Patients' demographics, clinical course, response to treatment, and complications were assessed. A total of 30 eyes of 15 patients with a mean age of 34.5 ± 8.3 years were studied. In three patients (20%), onset of uveitis preceded the diagnosis of MS. The course of MS was relapsing-remitting in 11 patients (73.3%) and secondary progressive in four patients (26.7%). At 1 year after institution of MMF, all the patients were on oral prednisolone ≤ 7.5 mg/day, all eyes were quiet without macular edema, and 53.3% of eyes gained visual improvement. Supplemental periocular and intraocular injections were needed during the first 6 months after starting MMF therapy. The systemic adverse effects were transient and minor in severity. MMF had beneficial effects on vision and intraocular inflammation with an acceptable safety profile.
Electronic Equalization of Multikilometer 10-Gb/s Multimode Fiber Links: Mode-Coupling Effects
NASA Astrophysics Data System (ADS)
Balemarthy, Kasyapa; Polley, Arup; Ralph, Stephen E.
2006-12-01
This paper investigates the ability of electronic equalization to compensate for modal dispersion in the presence of mode coupling in multimode fibers (MMFs) at 10 Gb/s. Using a new time-domain experimental method, mode coupling is quantified in MMF. These results, together with a comprehensive link model, allow to determine the impact of mode coupling on the performance of MMF. The equalizer performance on links from 300 m to 8 km is quantified with and without modal coupling. It is shown that the mode-coupling effects are influenced by the specific index profile and increase the equalizer penalty by as much as 1 dBo for 1-km links and 2.3 dBo for 2-km links when using a standard model of fiber profiles at 1310 nm.
Jonnalagadda, Mahesh; Brown, Christine E; Chang, Wen-Chung; Ostberg, Julie R; Forman, Stephen J; Jensen, Michael C
2013-01-01
Gene transfer and drug selection systems that enforce ongoing transgene expression in vitro and in vivo which are compatible with human pharmaceutical drugs are currently underdeveloped. Here, we report on the utility of incorporating human enzyme muteins that confer resistance to the lymphotoxic/immunosuppressive drugs methotrexate (MTX) and mycophenolate mofetil (MMF) in a multicistronic lentiviral vector for in vivo T lymphocyte selection. We found that co-expression of human dihydrofolate reductase (DHFR(FS); L22F, F31S) and inosine monophosphate dehydrogenase II (IMPDH2(IY); T333I, S351Y) conferred T cell resistance to the cytocidal and anti-proliferative effects of these drugs at concentrations that can be achieved clinically (up to 0.1 µM MTX and 1.0 µM MPA). Furthermore, using a immunodeficient mouse model that supports the engraftment of central memory derived human T cells, in vivo selection studies demonstrate that huEGFRt(+)DHFR(FS+)IMPDH2(IY+) T cells could be enriched following adoptive transfer either by systemic administration of MTX alone (4.4 -fold), MMF alone (2.9-fold), or combined MTX and MMF (4.9-fold). These findings demonstrate the utility of both DHFR(FS)/MTX and IMPDH2(IY)/MMF for in vivo selection of lentivirally transduced human T cells. Vectors incorporating these muteins in combination with other therapeutic transgenes may facilitate the selective engraftment of therapeutically active cells in recipients.
Three-dimensional eddy current solution of a polyphase machine test model (abstract)
NASA Astrophysics Data System (ADS)
Pahner, Uwe; Belmans, Ronnie; Ostovic, Vlado
1994-05-01
This abstract describes a three-dimensional (3D) finite element solution of a test model that has been reported in the literature. The model is a basis for calculating the current redistribution effects in the end windings of turbogenerators. The aim of the study is to see whether the analytical results of the test model can be found using a general purpose finite element package, thus indicating that the finite element model is accurate enough to treat real end winding problems. The real end winding problems cannot be solved analytically, as the geometry is far too complicated. The model consists of a polyphase coil set, containing 44 individual coils. This set generates a two pole mmf distribution on a cylindrical surface. The rotating field causes eddy currents to flow in the inner massive and conducting rotor. In the analytical solution a perfect sinusoidal mmf distribution is put forward. The finite element model contains 85824 tetrahedra and 16451 nodes. A complex single scalar potential representation is used in the nonconducting parts. The computation time required was 3 h and 42 min. The flux plots show that the field distribution is acceptable. Furthermore, the induced currents are calculated and compared with the values found from the analytical solution. The distribution of the eddy currents is very close to the distribution of the analytical solution. The most important results are the losses, both local and global. The value of the overall losses is less than 2% away from those of the analytical solution. Also the local distribution of the losses is at any given point less than 7% away from the analytical solution. The deviations of the results are acceptable and are partially due to the fact that the sinusoidal mmf distribution was not modeled perfectly in the finite element method.
Atypical presentation of macrophagic myofasciitis 10 years post vaccination.
Ryan, Aisling M; Bermingham, Niamh; Harrington, Hugh J; Keohane, Catherine
2006-12-01
Macrophagic myofasciitis (MMF) is an uncommon inflammatory disorder of muscle believed to be due to persistence of vaccine-derived aluminium hydroxide at the site of injection. The condition is characterised by diffuse myalgias, arthralgia and fatigue. We describe a patient with histologically confirmed MMF whose presentation was atypical with left chest and upper limb pain beginning more than 10 years post vaccination. Treatment with steroids led to symptomatic improvement. Although rare, clinicians should consider MMF in cases of atypical myalgia.
NASA Astrophysics Data System (ADS)
Yamamoto, Yojiro; Takahashi, Narumi; Pinar, Ali; Kalafat, Dogan; Citak, Seckin; Comoglu, Mustafa; Polat, Remzi; Kaneda, Yoshiyuki
2017-04-01
Both the geometry and the depth of the seismogenic zone of the North Anatolian Fault under the Marmara Sea (the Main Marmara Fault; MMF) are poorly understood, in part because of the fault's undersea location. We have started a series of long-term ocean bottom seismographs (OBSs) observation since 2014, as a part of the SATREPS collaborative project between Japan and Turkey namely "Earthquake and Tsunami Disaster Mitigation in the Marmara Region and Disaster Education in Turkey". We recorded 10 months of microseismic data with a dense array of OBSs from Sep. 2014 to Jul. 2015 and then applied double-difference relocation and 3-D tomographic modeling to obtain precise hypocenters on the MMF beneath the central and western Marmara Sea. The hypocenters show distinct lateral changes along the MMF: (1) Both the upper and lower crust beneath the Western High are seismically active and the maximum focal depth reaches 26 km, (2) seismic events are confined to the upper crust beneath the region extending from the eastern part of the Central Basin to the Kumburgaz Basin, and (3) the magnitude and direction of dip of the main fault changes under the Central Basin, where there is also an abrupt change in the depth of the lower limit of the seismogenic zone. We attribute this change to a segment boundary of the MMF. Our data show that the upper limit of the seismogenic zone corresponds to sedimentary basement. We also identified several inactive seismicity regions within the upper crust along the MMF; their spatial extent beneath the Kumburgaz Basin is greater than beneath the Western High. From the comparison with seafloor extensometer data, we consider that these inactive seismicity regions might indicate zones of strong coupling that are accumulating stress for release during future large earthquakes. In this presentation, we will also show the preliminary result of our second phase observation from Jul. 2015 to Jun. 2016.
Salvadori, M; Bock, A; Chapman, J; Dussol, B; Fritsche, L; Kliem, V; Lebranchu, Y; Oppenheimer, F; Pohanka, E; Tufveson, G; Rosati, A; Puig, X; Corbetta, G
2005-01-01
Mycophenolate mofetil (MMF) has greatly reduced the risk of acute rejection episodes (ARE) after renal transplantation, but dose reductions/withdrawals could jeopardize long-term results. The MOST database of "de novo" patients treated with MMF at month 1 and functioning grafts at month 12 were divided into 2 groups: groups 1, 2 g MMF at month 1 and month 12; and group 2, 2 g MMF at month 1 but MMF <2 g at month 12 to evaluate renal function glonerular filtration rate (GFR). In this study, 1136 patients were receiving 2 g MMF at month 1. On month 12, 645 were on 2 g (56.8%, group 1) and 431 were on <2 g (43.2%, group 2). Group 1 included younger recipients of younger donors with fewer patients with delayed graft function (DGF). Group 1 showed more ARE during month 1 and more patients who received induction. Mean Neoral daily doses at month 1/month 12 were 5.3/3.0 and 5.3/3.1 mg/kg in group 1 and group 2, respectively (P = .05 at month 12). GFR in group 1 and group 2 were 59.06 (CI 57.10-60.60) and 53.81 (CI 52-55.7) at month 1 (P < .001); 63.7 (CI 62.1-65.30) and 55.9 (CI 54.1-57.7) mL/min*1.73 m(2) at month 12 (P < .001). The mean increases in GFR between month 1 and month 12 were 4.64 and 1.94 mL/min*1.73 m(2), respectively (P < .05). A multivariate analysis also included 795 patients from the "maintenance" patient database with retrospective detailed information. The following parameters were highly predictive for good renal function at month 12: donor age younger than 60 years, recipient age younger than 60 years, immediate graft function, 12-month MMF dose = 2 g, absence of CMV infection, and 12-month Neoral dose <3 mg/kg/d. Maintenance of MMF dose at 2 g/d during the first year appears to facilitate the attainment of optimal renal function at 12-months after kidney transplantation.
Engl, Tobias; Makarević, Jasmina; Relja, Borna; Natsheh, Iyad; Müller, Iris; Beecken, Wolf-Dietrich; Jonas, Dietger; Blaheta, Roman A
2005-01-01
Background Tumor development remains one of the major obstacles following organ transplantation. Immunosuppressive drugs such as cyclosporine and tacrolimus directly contribute to enhanced malignancy, whereas the influence of the novel compound mycophenolate mofetil (MMF) on tumor cell dissemination has not been explored. We therefore investigated the adhesion capacity of colon, pancreas, prostate and kidney carcinoma cell lines to endothelium, as well as their beta1 integrin expression profile before and after MMF treatment. Methods Tumor cell adhesion to endothelial cell monolayers was evaluated in the presence of 0.1 and 1 μM MMF and compared to unstimulated controls. beta1 integrin analysis included alpha1beta1 (CD49a), alpha2beta1 (CD49b), alpha3beta1 (CD49c), alpha4beta1 (CD49d), alpha5beta1 (CD49e), and alpha6beta1 (CD49f) receptors, and was carried out by reverse transcriptase-polymerase chain reaction, confocal microscopy and flow cytometry. Results Adhesion of the colon carcinoma cell line HT-29 was strongly reduced in the presence of 0.1 μM MMF. This effect was accompanied by down-regulation of alpha3beta1 and alpha6beta1 surface expression and of alpha3beta1 and alpha6beta1 coding mRNA. Adhesion of the prostate tumor cell line DU-145 was blocked dose-dependently by MMF. In contrast to MMF's effects on HT-29 cells, MMF dose-dependently up-regulated alpha1beta1, alpha2beta1, alpha3beta1, and alpha5beta1 on DU-145 tumor cell membranes. Conclusion We conclude that MMF possesses distinct anti-tumoral properties, particularly in colon and prostate carcinoma cells. Adhesion blockage of HT-29 cells was due to the loss of alpha3beta1 and alpha6beta1 surface expression, which might contribute to a reduced invasive behaviour of this tumor entity. The enhancement of integrin beta1 subtypes observed in DU-145 cells possibly causes re-differentiation towards a low-invasive phenotype. PMID:15644133
Medrano-Galarza, Catalina; LeBlanc, Stephen J; DeVries, Trevor J; Jones-Bitton, Andria; Rushen, Jeffrey; Marie de Passillé, Anne; Haley, Derek B
2017-08-01
Dairy calves in North America traditionally are housed individually and fed by manual milk feeding (MMF) systems with buckets or bottles. Automated milk feeders (AMF) allow for more natural milk feeding frequencies and volumes, and calves are usually housed in groups. The objectives of this study were to (1) determine the prevalence of various milk-fed calf management and feeding practices and (2) compare these practices between dairy farms using MMF and AMF systems. A national online survey was performed from January to May 2015 to quantify management practices for the care of milk-fed dairy calves in Canada. A total of 670 responses were received (6% of all dairy farms in Canada). Among respondents, 16% used AMF and 84% used MMF. Seventy percent of the farms using AMF had freestall barns compared with only 48% of those using MMF. A greater proportion of AMF farms (30%) also had automatic milking systems (AMS) compared with MMF farms (8%). Among tiestall farms, a herd size of >80 milking cows was associated with having an AMF [odds ratio (OR) = 3.8; 95% confidence interval (CI): 1.6-11.4]. For freestall or bedded-pack farms, a herd size of >80 milking cows (OR = 3.5; CI: 1.8-6.6), having an AMS (OR = 3.1; CI: 1.6-5.7), and use of cow brushes (OR = 3.1; CI: 1.3-6.9) were associated with having an AMF. Calves fed with AMS typically were housed in groups of 10 to 15, whereas almost 76% of the farms with MMF housed calves individually. Although both AMF and MMF farms fed similar amounts of milk in the first week of life (median = 6 L/d), the cumulative volume fed in the first 4 wk differed significantly, with a median of 231 versus 182 L for AMF and MMF, respectively. Median peak milk allowance was higher for AMF than for MMF (10 vs. 8 L/d, respectively). In summary, farms using AMF were larger, provided more milk to calves, and used more automation in general (i.e., in other areas of their operation). These data provide insights into calf-rearing practices across Canada and into how the use of AMF is affecting calf feeding and management on dairy farms. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Near-source noise suppression of AMT by compressive sensing and mathematical morphology filtering
NASA Astrophysics Data System (ADS)
Li, Guang; Xiao, Xiao; Tang, Jing-Tian; Li, Jin; Zhu, Hui-Jie; Zhou, Cong; Yan, Fa-Bao
2017-12-01
In deep mineral exploration, the acquisition of audio magnetotelluric (AMT) data is severely affected by ambient noise near the observation sites; This near-field noise restricts investigation depths. Mathematical morphological filtering (MMF) proved effective in suppressing large-scale strong and variably shaped noise, typically low-frequency noise, but can not deal with pulse noise of AMT data. We combine compressive sensing and MMF. First, we use MMF to suppress the large-scale strong ambient noise; second, we use the improved orthogonal match pursuit (IOMP) algorithm to remove the residual pulse noise. To remove the noise and protect the useful AMT signal, a redundant dictionary that matches with spikes and is insensitive to the useful signal is designed. Synthetic and field data from the Luzong field suggest that the proposed method suppresses the near-source noise and preserves the signal well; thus, better results are obtained that improve the output of either MMF or IOMP.
Xu, Pengbai; Dong, Yongkang; Zhang, Juwang; Zhou, Dengwang; Jiang, Taofei; Xu, Jinlong; Zhang, Hongying; Zhu, Tao; Lu, Zhiwei; Chen, Liang; Bao, Xiaoyi
2015-08-24
We propose a bend-insensitive distributed Brillouin optical fiber sensing by using a singlemode-multimode-singlemode optical fiber structure for the first time to the best of our knowledge. The sensing fiber is a graded-index multimode fiber (GI-MMF) sandwiched by two standard single-mode fibers (SMFs) with central-alignment splicing at the interface between GI-MMF and SMF to excite the fundamental mode in GI-MMF. The sensing system can resist a minimal bend radius of 1.25mm while maintain the measurement performance, with which the measured coefficients of strain and temperature are 421.6MHz/% and 0.826MHz/°C, respectively. We also demonstrate that the higher-order modes excited in GI-MMF can be easily influenced by bending, so that exciting the fundamental mode is essential for bend-insensitive distributed sensing.
NASA Technical Reports Server (NTRS)
Mohr, Karen Irene; Tao, Wei-Kuo; Chern, Jiun-Dar; Kumar, Sujay V.; Peters-Lidard, Christa D.
2013-01-01
The present generation of general circulation models (GCM) use parameterized cumulus schemes and run at hydrostatic grid resolutions. To improve the representation of cloud-scale moist processes and landeatmosphere interactions, a global, Multi-scale Modeling Framework (MMF) coupled to the Land Information System (LIS) has been developed at NASA-Goddard Space Flight Center. The MMFeLIS has three components, a finite-volume (fv) GCM (Goddard Earth Observing System Ver. 4, GEOS-4), a 2D cloud-resolving model (Goddard Cumulus Ensemble, GCE), and the LIS, representing the large-scale atmospheric circulation, cloud processes, and land surface processes, respectively. The non-hydrostatic GCE model replaces the single-column cumulus parameterization of fvGCM. The model grid is composed of an array of fvGCM gridcells each with a series of embedded GCE models. A horizontal coupling strategy, GCE4fvGCM4Coupler4LIS, offered significant computational efficiency, with the scalability and I/O capabilities of LIS permitting landeatmosphere interactions at cloud-scale. Global simulations of 2007e2008 and comparisons to observations and reanalysis products were conducted. Using two different versions of the same land surface model but the same initial conditions, divergence in regional, synoptic-scale surface pressure patterns emerged within two weeks. The sensitivity of largescale circulations to land surface model physics revealed significant functional value to using a scalable, multi-model land surface modeling system in global weather and climate prediction.
Dhande, Isha S; Zhu, Yaming; Braun, Michael C; Hicks, M John; Wenderfer, Scott E; Doris, Peter A
2017-03-01
Stroke-prone spontaneously hypertensive rats (SHR-A3) develop strokes and progressive kidney disease as a result of naturally occurring genetic variations. We recently identified genetic variants in immune signaling pathways that contribute to end-organ injury. The present study was designed to test the hypothesis that a dysregulated immune response promotes stroke susceptibility. We salt-loaded 20 wk old male SHR-A3 rats and treated them with the immunosuppressant mycophenolate mofetil (MMF, 25 mg/kg/day po) ( n = 8) or vehicle (saline) ( n = 9) for 8 wk. Blood pressure (BP) was measured weekly by telemetry. Compared with vehicle-treated controls, MMF-treated SHR-A3 rats had improved survival and lower neurological deficit scores (1.44 vs. 0.125; P < 0.02). Gross morphology of the brain revealed cerebral edema in 8 of 9, and microbleeds and hemorrhages in 5 of 9 vehicle-treated rats. These lesions were absent in MMF-treated rats. Brain CD68 expression, indicating macrophage/microglial activation, was upregulated in vehicle-treated rats with microbleeds and hemorrhages but was undetectable in the brains of MMF-treated rats. MMF also prevented renal injury in SHR-A3 rats, evidenced by reduced proteinuria (albumin:creatinine) from 7.52 to 1.05 mg/mg ( P < 0.03) and lower tubulointerstitial injury scores (2.46 vs. 1.43; P < 0.01). Salt loading resulted in a progressive increase in BP, which was blunted in rats receiving MMF. Our findings provide evidence that abnormal immune activation predisposes to cerebrovascular and renal injury in stroke-prone SHR-A3 rats. Copyright © 2017 the American Physiological Society.
Tunable multimode-interference bandpass fiber filter.
Antonio-Lopez, J E; Castillo-Guzman, A; May-Arrioja, D A; Selvas-Aguilar, R; Likamwa, P
2010-02-01
We report on a wavelength-tunable filter based on multimode interference (MMI) effects. A typical MMI filter consists of a multimode fiber (MMF) spliced between two single-mode fibers (SMF). The peak wavelength response of the filter exhibits a linear dependence when the length of the MMF is modified. Therefore a capillary tube filled with refractive-index-matching liquid is used to effectively increase the length of the MMF, and thus wavelength tuning is achieved. Using this filter a ring-based tunable erbium-doped fiber laser is demonstrated with a tunability of 30 nm, covering the full C-band.
Hinchcliff, Monique; Huang, Chiang-Ching; Wood, Tammara A.; Mahoney, J. Matthew; Martyanov, Viktor; Bhattacharyya, Swati; Tamaki, Zenshiro; Lee, Jungwha; Carns, Mary; Podlusky, Sofia; Sirajuddin, Arlene; Shah, Sanjiv J; Chang, Rowland W.; Lafyatis, Robert; Varga, John; Whitfield, Michael L.
2013-01-01
Heterogeneity in systemic sclerosis/SSc confounds clinical trials. We previously identified ‘intrinsic’ gene expression subsets by analysis of SSc skin. Here we test the hypotheses that skin gene expression signatures including intrinsic subset are associated with skin score/MRSS improvement during mycophenolate mofetil (MMF) treatment. Gene expression and intrinsic subset assignment were measured in 12 SSc patients’ biopsies and ten controls at baseline, and from serial biopsies of one cyclophosphamide-treated patient, and nine MMF-treated patients. Gene expression changes during treatment were determined using paired t-tests corrected for multiple hypothesis testing. MRSS improved in four of seven MMF-treated patients classified as the inflammatory intrinsic subset. Three patients without MRSS improvement were classified as normal-like or fibroproliferative intrinsic subsets. 321 genes (FDR <5%) were differentially expressed at baseline between patients with and without MRSS improvement during treatment. Expression of 571 genes (FDR <10%) changed between pre- and post-MMF treatment biopsies for patients demonstrating MRSS improvement. Gene expression changes in skin are only seen in patients with MRSS improvement. Baseline gene expression in skin, including intrinsic subset assignment, may identify SSc patients whose MRSS will improve during MMF treatment, suggesting that gene expression in skin may allow targeted treatment in SSc. PMID:23677167
Han, Cong-hui; Li, Huai-fu; Wang, Yu-xin; Zhang, Ming; Wang, Yin; Yin, Ming; Min, Zhi-lian; Zheng, Ke-li
2005-05-25
To investigate the influence of mycophenolate mofetil (MMF) on the maturation and allostimulatory activity of cultured dendritic cell progenitors (DCPs) and to evaluate the efficacy of pretreatment of donor dendritic cells (DCs) with MMF in tolerance induction in allograft recipients and its possible mechanism. DCPs of Balb/c mice were cultured in culture fluid containing recombinant mouse granulocyte-macrophage colony stimulating factor (GM-CSF), and then divided into 4 groups: control group, MMF group, lipopolysaccharide (LPS) group, and MMF + LPS group. Seven days later, flow cytometry was used to analyze the phenotypes of the DCs. ELISA was used to examine the level of IL-12 in the supernatant. T cells from the spleens of C57/BL6 mice were cultured together with inactivated DCs from Balb/c mice, and added with [(3)H]-TdR. Mixed lymphocyte reaction (MLR) was analyzed. The DCs and MMF-DCs cultured for 5 days were co-cultured with T hybridoma cells of the line MF2.2D9 in culture fluid containing ovalbumin (OVA). Twenty-four hours later, the supernatant was collected and ELISA was used to measure the level of interleukin (IL)-12 so as to reflect the antigen-presenting ability of the DCs. OVA immunized C57/BL6 mice for 4 times. 21 days after T cells were collected from the spleens and co-incubated with DCs and MMF-DCs, [(3)H]-TdR was added and the values of counts per minute (cpm) were calculated so as to analyze the antigen-specific proliferation. Twenty-four Balb/c mice were randomly divided into 3 groups: group A (without treatment), group B (treatment with intravenous injection of untreated DCs of Balb/c mice), and group C (treatment with intravenous injection of DCs of Balb/c mice treated with MMF), and then transplanted with the hearts of C57/BL6 mice. The functions of the transplanted hearts were evaluated by touching the arterial pulse and histological examination. ELISA was used to detect the levels of Th1 cytokines, such as IL-12, IL-4, IL-10, IL-2, and IFN-gamma, in the cultured DCs and in the sera of the recipients 7 and 14 days after culture or transplantation. The immunophenotypic analysis showed that in comparison with those in the control group and the LPS group the expressions of the costimulatory molecules, Ia(d), CD80, and CD86, of the DCPs were significantly weaker in the MMF-group and MMP + LPS group. The IL-12 levels in the supernatant of the MMF and MMF + LPS groups of DCPs were significantly lower than those in the other groups (P < 0.01). The IL-12 level of the MF2.2D9 cells treated with MMF-treated DCs was significantly lower than control group (P < 0.01). The ability to stimulate proliferation of T cells of the same genotype in the MMF-DC group was significantly inhibited (P < 0.01). The survival time of the transplanted heart was 30.50 +/- 3.25 days in the C57/BL6 mice injected with untreated DCPs of Balb/c mice (21.25 +/- 2.12, P < 0.01) and that in the control C57/BL6 mice (8.63 +/- 1.06 days, P < 0.01) and with a significant difference between the latter 2 groups too (P < 0.01). The levels of, such as IL-2 and IFN-gamma, 7 and 14 days after heart transplantation of the group B were all significantly lower than those of the group A (both P < 0.05). The IL-2 and IFN-gamma levels 7 days after the heart transplantation were similar to those in the group B (both P > 0.05) and even lower than those of the group C (both P < 0.05). The IL-10 level in the groups B and C were all higher than those in the group A (all P < 0.05) with a significant difference between the group B and group C. The level of IL-4 was not significantly different among the 3 groups. MMF has a significant suppressive effect on the maturation and function of DCs, which leads to a donor-specific tolerance in transplant recipients.
Dental occlusion ties: A rapid, safe, and non‐invasive maxillo‐mandibular fixation technology
2017-01-01
Objectives For decades, Erich arch bars have been a standard in establishing maxillo‐mandibular fixation (MMF). While reliable, the approach risks sharps injury, consumes operating room time, and inflicts gingival trauma. Newer technologies including screw‐based techniques and “hybrid” techniques have improved MMF by reducing sharps injuries and operating room time, but risk injury to tooth roots, nerves, and gingiva. This study aims to establish the application, strengths, and limitations of dental occlusion ties as a novel alternative in maxillo‐mandibular fixation. Study Design Prospective, non‐blinded, human feasibility clinical trial. Materials and Methods An iterative prototyping process was used to invent dental occlusion ties (brand name: Minne Ties). Development included 3D printing, cadaver prototype testing, human apical embrasure measurement, and ultimately non‐significant risk human clinical trial testing. In the IRB‐approved feasibility clinical trial, the devices were applied to mandible and maxilla fracture candidates with fractures amenable to intra‐operative MMF with open reduction with internal fixation. The ties were removed prior to extubation. Pre‐teens, comminuted fracture patients, and patients requiring post‐operative MMF were excluded. Results Manufactured, sterile prototypes secured MMF successfully in management of unilateral and bilateral mandible and maxilla fractures. All patients reported correction of pre‐operative malocclusion. Application times were typically 12–15 minutes for a single surgeon to achieve MMF. Patients incurred negligible gingival trauma from the technology as the ties require no tissue penetration for application. Conclusions Dental occlusion ties offer a non‐invasive solution featuring operating room efficiency, minimized sharps risk, and less bony and soft tissue trauma than current commercialized solutions. Level of Evidence Therapeutic, IV PMID:28894837
NASA Astrophysics Data System (ADS)
Zhang, Ziyang; Fiebrandt, Julia; Haynes, Dionne; Sun, Kai; Madhav, Kalaga; Stoll, Andreas; Makan, Kirill; Makan, Vadim; Roth, Martin
2018-03-01
Three-dimensional multi-mode interference devices are demonstrated using a single-mode fiber (SMF) center-spliced to a section of polygon-shaped core multimode fiber (MMF). This simple structure can effectively generate well-localized self-focusing spots that match to the layout of a chosen multi-core fiber (MCF) as a launcher device. An optimized hexagon-core MMF can provide efficient coupling from a SMF to a 7-core MCF with an insertion loss of 0.6 dB and a power imbalance of 0.5 dB, while a square-core MMF can form a self-imaging pattern with symmetrically distributed 2 × 2, 3 × 3 or 4 × 4 spots. These spots can be directly received by a two-dimensional detector array. The device can work as a vector curvature sensor by comparing the relative power among the spots with a resolution of ∼0.1° over a 1.8 mm-long MMF.
Extracting Drug-Drug Interactions with Word and Character-Level Recurrent Neural Networks
Kavuluru, Ramakanth; Rios, Anthony; Tran, Tung
2017-01-01
Drug-drug interactions (DDIs) are known to be responsible for nearly a third of all adverse drug reactions. Hence several current efforts focus on extracting signal from EMRs to prioritize DDIs that need further exploration. To this end, being able to extract explicit mentions of DDIs in free text narratives is an important task. In this paper, we explore recurrent neural network (RNN) architectures to detect and classify DDIs from unstructured text using the DDIExtraction dataset from the SemEval 2013 (task 9) shared task. Our methods are in line with those used in other recent deep learning efforts for relation extraction including DDI extraction. However, to our knowledge, we are the first to investigate the potential of character-level RNNs (Char-RNNs) for DDI extraction (and relation extraction in general). Furthermore, we explore a simple but effective model bootstrapping method to (a). build model averaging ensembles, (b). derive confidence intervals around mean micro-F scores (MMF), and (c). assess the average behavior of our methods. Without any rule based filtering of negative examples, a popular heuristic used by most earlier efforts, we achieve an MMF of 69.13. By adding simple replicable heuristics to filter negative instances we are able to achieve an MMF of 70.38. Furthermore, our best ensembles produce micro F-scores of 70.81 (without filtering) and 72.13 (with filtering), which are superior to metrics reported in published results. Although Char-RNNs turnout to be inferior to regular word based RNN models in overall comparisons, we find that ensembling models from both architectures results in nontrivial gains over simply using either alone, indicating that they complement each other. PMID:29034375
Modal noise impact in radio over fiber multimode fiber links.
Gasulla, I; Capmany, J
2008-01-07
A novel analysis is given on the statistics of modal noise for a graded-index multimode fiber (MMF) link excited by an analog intensity modulated laser diode. We present the speckle contrast as a function of the power spectrum of the modulated source and the transfer function of the MMF which behaves as an imperfect transversal microwave photonic filter. The theoretical results confirm that the modal noise is directly connected with the coherence properties of the optical source and show that the performance of high-frequency Radio Over Fiber (ROF) transmission through MMF links for short and middle reach distances is not substantially degraded by modal noise.
NASA Astrophysics Data System (ADS)
Mizuno, Yosuke; Hagiwara, Sonoko; Kawa, Tomohito; Lee, Heeyoung; Nakamura, Kentaro
2018-05-01
Strain sensing based on modal interference in multimode fibers (MMFs) has been extensively studied, but no experimental or theoretical reports have been given as to how the system works when strain is applied not to the whole MMF but only to part of the MMF. Here, using a perfluorinated graded-index polymer optical fiber as the MMF, we investigate the strain sensing characteristics of this type of sensor when strain is partially applied to fiber sections with different lengths. The strain sensitivity dependence on the length of the strained section reveals that this strain sensor actually behaves as a displacement sensor.
Zhang, Zhi-qiang; Lin, Bo; Xia, Si-qing; Wang, Xue-jiang; Yang, A-mimg
2007-01-01
The flocculating activity of a novel bioflocculant MMF1 produced by multiple-microorganism consortia MM1 was investigated. MM1 was composed of strain BAFRT4 identified as Staphylococcus sp. and strain CYGS1 identified as Pseudomonas sp. The flocculating activity of MMF1 isolated from the screening medium was 82.9%, which is remarkably higher than that of the bioflocculant produced by either of the strains under the same condition. Brewery wastewater was also used as the carbon source for MM1, and the cost-effective production medium for MM1 mainly comprised 1.0 L brewery water (chemical oxygen demand (COD) 5000 mg/L), 0.5 g/L urea, 0.5 g/L yeast extract, and 0.2 g/L (NH4)2SO4. The optimal conditions for the production of MMF1 was inoculum size 2%, initial pH 6.0, cultivating temperature 30 degrees C, and shaking speed 160 r/min, under which the flocculating activity of the MMF1 reached 96.8%. Fifteen grams of purified bioflocculant could be recovered from 1.0 L of fermentation broth. MMF1 was identified as a macromolecular substance containing both protein and polysaccharide. It showed good flocculating performance in treating indigotin printing and dyeing wastewater, and the maximal removal efficiencies of COD and chroma were 79.2% and 86.5%, respectively.
Auditory Magnetic Mismatch Field Latency: A Biomarker for Language Impairment in Autism
Roberts, Timothy P.L.; Cannon, Katelyn M.; Tavabi, Kambiz; Blaskey, Lisa; Khan, Sarah Y.; Monroe, Justin F.; Qasmieh, Saba; Levy, Susan E.; Edgar, J. Christopher
2011-01-01
Background Auditory processing abnormalities are frequently observed in Autism Spectrum Disorders (ASD), and these abnormalities may have sequelae in terms of clinical language impairment (LI). The present study assessed associations between language impairment and the amplitude and latency of the superior temporal gyrus magnetic mismatch field (MMF) in response to changes in an auditory stream of tones or vowels. Methods 51 children with ASD and 27 neurotypical controls, all aged 6-15 years, underwent neuropsychological evaluation, including tests of language function, as well as magnetoencephalographic (MEG) recording during presentation of tones and vowels. The MMF was identified in the difference waveform obtained from subtraction of responses to standard stimuli from deviant stimuli. Results MMF latency was significantly prolonged (p<0.001) in children with ASD compared to neurotypical controls. Furthermore, this delay was most pronounced (∼50ms) in children with concomitant LI, with significant differences in latency between children with ASD with LI and those without (p<0.01). Receiver operator characteristic analysis indicated a sensitivity of 82.4% and specificity of 71.2% for diagnosing LI based on MMF latency. Conclusion Neural correlates of auditory change detection (the MMF) are significantly delayed in children with ASD, and especially those with concomitant LI suggesting both a neurobiological basis for LI as well as a clinical biomarker for LI in ASD. PMID:21392733
Miles, Clifford D; Skorupa, Jill Y; Sandoz, John P; Rigley, Theodore H; Nielsen, Kathleen J; Stevens, R Brian
2011-01-01
Maintenance immunosuppression with sirolimus (SRL) in renal transplantation has been associated with proteinuria. We report long-term outcomes of kidney transplant recipients maintained on steroid-free regimens, either SRL with low-dose tacrolimus (SRL/L-Tac) or mycophenolate mofetil (MMF) with high-dose tacrolimus (MMF/H-Tac). We conducted a case-matched study of 50 patients receiving MMF/H-Tac, matched 1:2 with 100 patients maintained on SRL/L-Tac. All patients were induced with rabbit antithymocyte globulin followed by early steroid withdrawal. Comparisons were made of patient and graft survival, graft function, acute rejection, and albuminuria. There were no significant differences between the SRL/L-Tac and MMF/H-Tac groups for patient survival, graft survival, occurrence of acute rejection, or graft function. There was no difference in the proportion of patients with albumin/creatinine ratio (ACR) ≥300 μg/mg (19% vs. 20%), but more patients in the SRL group were receiving renin-angiotensin system blocking agents (72% vs. 53%, p = 0.04). Only flushing the donor kidney with histidine-tryptophan-ketoglutarate solution (vs. UW solution) was predictive of albuminuria. Long-term outcomes are similar at our center for kidney transplant patients receiving either SRL/L-Tac or MMF/H-Tac. Although the occurrence of albuminuria was not different, significantly more SRL-treated patients were receiving antiproteinuric medications. © 2010 John Wiley & Sons A/S.
Chkheidze, Rati; Burns, Dennis K; White, Charles L; Castro, Diana; Fuller, Julie; Cai, Chunyu
2017-04-01
Macrophagic myofasciitis (MMF) is an inflammatory condition associated with the intramuscular (i.m.) injection of aluminum adjuvant-containing vaccines. It is clinically characterized by myalgia, weakness, and chronic fatigue and histologically by aggregates of cohesive macrophages with abundant basophilic, periodic acid-Schiff (PAS)-positive, diastase-resistant granules that percolate through the peri- and endomysium without eliciting substantial myofiber damage. The definitive diagnosis of MMF requires demonstration of aluminum within these macrophages. We evaluated the Morin stain, a simple, 2-step histochemical stain for aluminum, as a confirmatory diagnostic tool for MMF. Among 2270 muscle biopsies processed at UTSW between 2010 and 2015, a total of 12 MMF cases and 1 subcutaneous vaccination granuloma case were identified (11 pediatric, 2 adults). With the Morin stain, all 13 cases showed strong granular reactivity within the cytoplasm of macrophages but not in myofibers or connective tissue. Three cases of inflammatory myopathy with abundant macrophages (IMAM), 8 cases of granulomatous inflammation and 23 other deltoid muscle biopsies used as controls were all negative. Morin stain could be used in both formalin-fixed paraffin-embedded and cryostat sections. Thus, Morin stain detects aluminum with high sensitivity and specificity in human muscle and soft tissue and may improve the diagnostic yield of MMF and vaccination granuloma. © 2017 American Association of Neuropathologists, Inc.
Klintmalm, G B; Feng, S; Lake, J R; Vargas, H E; Wekerle, T; Agnes, S; Brown, K A; Nashan, B; Rostaing, L; Meadows-Shropshire, S; Agarwal, M; Harler, M B; Garcia-Valdecasas, J-C
2014-08-01
This exploratory phase II study evaluated the safety and efficacy of belatacept in de novo adult liver transplant recipients. Patients were randomized (N = 260) to one of the following immunosuppressive regimens: (i) basiliximab + belatacept high dose [HD] + mycophenolate mofetil (MMF), (ii) belatacept HD + MMF, (iii) belatacept low dose [LD] + MMF, (iv) tacrolimus + MMF, or (v) tacrolimus alone. All received corticosteroids. Demographic characteristics were similar among groups. The proportion of patients who met the primary end point (composite of acute rejection, graft loss, death by month 6) was higher in the belatacept groups (42–48%) versus tacrolimus groups (15–38%), with the highest number of deaths and grafts losses in the belatacept LD group. By month 12, the proportion surviving with a functioning graft was higher with tacrolimus + MMF (93%) and lower with belatacept LD (67%) versus other groups (90%: basiliximab + belatacept HD; 83%: belatacept HD; 88%: tacrolimus). Mean calculated GFR was 15–34 mL/min higher in belatacept-treated patients at 1 year. Two cases of posttransplant lymphoproliferative disease and one case of progressive multifocal leukoencephalopathy occurred in belatacept-treated patients. Follow-up beyond month 12 revealed an increase in death and graft loss in another belatacept group (belatacept HD), after which the study was terminated.
Silicophosphate Sorbents, Based on Ore-Processing Plants' Waste in Kazakhstan
ERIC Educational Resources Information Center
Kubekova, Sholpan N.; Kapralova, Viktoria I.; Telkov, Shamil A.
2016-01-01
The problem of ore-processing plants' waste and man-made mineral formations (MMF) disposal is very important for the Republic of Kazakhstan. The research of various ore types (gold, polymetallic, iron-bearing) MMF from a number of Kazakhstan's deposits using a complex physical and chemical methods showed, that the waste's main components are…
The effect of 1/f fluctuation in inter-stimulus intervals on auditory evoked mismatch field.
Harada, Nobuyoshi; Masuda, Tadashi; Endo, Hiroshi; Nakamura, Yukihiro; Takeda, Tsunehiro; Tonoike, Mitsuo
2005-05-13
This study focused on the effect of regularity of environmental stimuli on the informational order extracting function of human brain. The regularity of environmental stimuli can be described with the exponent n of the fluctuation 1/f(n). We studied the effect of the exponent of the fluctuation in the inter-stimulus interval (ISI) on the elicitation of auditory evoked mismatch fields (MMF) with two sounds with alternating frequency. ISI times were given by three types of fluctuation, 1/f(0), 1/f(1), 1/f(2), and with a fixed interval (1/f(infinity)). The root mean square (RMS) value of the MMF increased significantly (F(3/9)=4.95, p=0.027) with increases in the exponent of the fluctuation. Increments in the regularity of the fluctuation provoked enhancement of the MMF, which reflected the production of a memory trace, based on the anticipation of the stimulus timing. The gradient of the curve, indicating the ratio of increments between the MMF and the exponent of fluctuation, can express a subject's capability to extract regularity from fluctuating stimuli.
NASA Astrophysics Data System (ADS)
Wu, Xiongxiong; Wang, Xiaorui; Zhang, Jianlei; Yuan, Ying; Chen, Xiaoxiang
2017-04-01
To realize large field of view (FOV) and high-resolution dynamic gaze of the moving target, this paper proposes the monocentric multiscale foveated (MMF) imaging system based on monocentric multiscale design and foveated imaging. First we present the MMF imaging system concept. Then we analyze large field curvature and distortion of the secondary image when the spherical intermediate image produced by the primary monocentric objective lens is relayed by the microcameras. Further a type of zoom endoscope objective lens is selected as the initial structure and optimized to minimize the field curvature and distortion with ZEMAX optical design software. The simulation results show that the maximum field curvature in full field of view is below 0.25 mm and the maximum distortion in full field of view is below 0.6%, which can meet the requirements of the microcamera in the proposed MMF imaging system. In addition, a simple doublet is used to design the foveated imaging system. Results of the microcamera together with the foveated imager compose the results of the whole MMF imaging system.
Pape, Lars; Ahlenstiel, Thurid; Kreuzer, Martin; Ehrich, Jochen H H
2008-09-01
It has been shown in adult kidney transplant recipients that a conversion from MMF to EC-MPS significantly reduced the GI related symptom burden. No such study exists on children with GI problems while receiving MMF therapy. Ten paediatric kidney transplant recipients (mean age 14.5 yr, s.d. 4.5) receiving triple immunosuppression (Cyclosporin A or Tacrolimus + MMF + Prednisolone) with severe GI symptoms were converted to an equimolar dose of EC-MPS. The GSRS was completed before and at four wk after the switch, and GFR was determined for a mean period of six months. Values were compared by the paired t-test. Mean GSRS improved significantly after the switch to EC-MPS in all but one patient, from 2.1 (s.d. 0.9) to 1.1 (s.d. 0.6). The differences could be found in all four subscales. Graft function did not change after conversion to EC-MPS. In children with moderate or severe GI symptoms while receiving MMF, conversion to EC-MPS led to significantly reduced GI symptoms.
Zhu, Long; Wang, Andong; Chen, Shi; Liu, Jun; Mo, Qi; Du, Cheng; Wang, Jian
2017-10-16
Twisted light carrying orbital angular momentum (OAM) is a special kind of structured light that has a helical phase front, a phase singularity, and a doughnut intensity profile. Beyond widespread developments in manipulation, microscopy, metrology, astronomy, nonlinear and quantum optics, OAM-carrying twisted light has seen emerging application of optical communications in free space and specially designed fibers. Instead of specialty fibers, here we show the direct use of a conventional graded-index multi-mode fiber (MMF) for OAM communications. By exploiting fiber-compatible mode exciting and filtering elements, we excite the first four OAM mode groups in an MMF. We demonstrate 2.6-km MMF transmission using four data-carrying OAM mode groups (OAM 0,1 , OAM +1,1 /OAM -1,1 , OAM +2,1 , OAM +3,1 ). Moreover, we demonstrate two data-carrying OAM mode groups multiplexing transmission over the 2.6-km MMF with low-level crosstalk free of multiple-input multiple-output digital signal processing (MIMO-DSP). The demonstrations may open up new perspectives to fiber-based OAM communication/non-communication applications using already existing conventional fibers.
Lei, Yi; Li, Jianqiang; Fan, Yuting; Yu, Dawei; Fu, Songnian; Yin, Feifei; Dai, Yitang; Xu, Kun
2016-12-12
In this paper, we experimentally demonstrate space-division-multiplexed (SDM) transmission of IEEE 802.11ac-compliant 3-spatial-stream WLAN signals over 3 spatial modes of conventional 50um graded-index (GI) multimode fiber (MMF) employing non-mode-selective 3D-waveguide photonic lantern. Two kinds of scenarios, including fiber-only transmission and fiber-wireless hybrid transmission, were investigated by measuring error vector magnitude (EVM) performance for each stream and condition number (CN) of the channel matrix. The experimental results show that, SDM-based MMF link could offer a CN< 20dB well-conditioned MIMO channel over up to 1km fiber length within 0-6GHz, achieving as low as 2.38%, 2.97% and 2.11% EVM performance for 1km MMF link at 2.4GHz, 5.8GHz, and 200m MMF link followed by 1m air distance at 2.7GHz, respectively. These results indicate the possibility to distribute wireless MIMO signals over existing in-building commercially-available MMFs with enormous cost-saving.
Nakane, Takahiko; Nakamae, Hirohisa; Yamaguchi, Takuhiro; Kurosawa, Saiko; Okamura, Atsuo; Hidaka, Michihiro; Fuji, Shigeo; Kohno, Akio; Saito, Takeshi; Aoyama, Yasutaka; Hatanaka, Kazuo; Katayama, Yoshio; Yakushijin, Kimikazu; Matsui, Toshimitsu; Yamamori, Motohiro; Takami, Akiyoshi; Hino, Masayuki; Fukuda, Takahiro
2017-04-01
To test the feasibility of mycophenolate mofetil (MMF) for graft-versus-host disease (GVHD) prophylaxis in Japanese patients, we conducted two multicenter prospective phase II trials of allogeneic hematopoietic stem-cell transplantation (HSCT) from HLA-matched related donors (MRD group) with MMF and cyclosporine or HLA 7-8/8 allele-matched unrelated bone-marrow donors (URD group) with MMF and tacrolimus. The cumulative incidences of grade II-IV acute GVHD on day 100, which was the primary endpoint in these trials, were 45.0% (90% CI 25.8-62.5) and 25.8% (90% CI 13.9-39.5) in the MRD (n = 20) and URD (n = 31) groups, respectively. The rates of 3-year overall survival and non-relapse mortality were 80.0 and 15.0% in the MRD group and 74.2 and 6.5% in the URD group, respectively. GVHD prophylaxis with MMF may lead to a lower incidence of severe mucositis and faster neutrophil engraftment compared to that with methotrexate. A pharmacokinetics study of mycophenolic acid (MPA) showed that a relatively higher plasma concentration of MPA was associated with a lower incidence of acute GVHD. In conclusion, the results of these studies suggest that GVHD prophylaxis with MMF may be useful as an alternative in Japanese patients who may benefit from faster engraftment or less severe mucositis after allogeneic HSCT.
Randomized controlled trial of FTY720 versus MMF in de novo renal transplantation.
Tedesco-Silva, Helio; Pescovitz, Mark D; Cibrik, Diane; Rees, Michael A; Mulgaonkar, Shamkant; Kahan, Barry D; Gugliuzza, Kristene K; Rajagopalan, P R; Esmeraldo, Ronaldo de M; Lord, Hélène; Salvadori, Maurizio; Slade, Jennifer M
2006-12-27
Phase II trials of FTY720, a novel immunomodulator, have shown promise in preventing rejection with both standard and reduced cyclosporine exposure. This study was designed to confirm those findings. This one-year, multicenter, randomized, phase III study in 696 de novo renal transplant patients compared FTY720 5 mg plus reduced-dose cyclosporine (RDC) or FTY720 2.5 mg plus full-dose cyclosporine (FDC) with mycophenolate mofetil (MMF) plus FDC. All patients received concomitant corticosteroid therapy without antibody induction. The primary efficacy composite endpoint was the incidence of first treated biopsy-proven acute rejection (treated BPAR), graft loss, death or premature study discontinuation at month 12. FTY720 2.5 mg plus FDC was demonstrated to be non-inferior to MMF plus FDC as the primary efficacy endpoint (30.8% and 30.6%) was comparable. The FTY720 5 mg plus RDC treatment regimen was discontinued due to an increased incidence of acute rejection episodes (primary endpoint 43.3%). FTY720 was associated with significantly lower creatinine clearance with a mean difference at 12 months between FTY720 2.5 mg plus FDC and MMF plus FDC of 8 ml/min. While FTY720 2.5 mg plus FDC yielded similar efficacy to MMF plus FDC, the FTY720 5 mg plus RDC did not allow a 50% reduction in cyclosporine exposure. The associated lower creatinine clearance indicated that FTY720 combined with cyclosporine provided no benefit over standard care.
Ciancio, G.; Sageshima, J.; Chen, L.; Gaynor, J. J.; Hanson, L.; Tueros, L.; Montenora-Velarde, E.; Gomez, C.; Kupin, W.; Guerra, G.; Mattiazzi, A.; Fornoni, A.; Pugliese, A.; Roth, D.; Wolf, M.; Burke, G. W.
2015-01-01
Simultaneous pancreas kidney transplantation (SPKT) is the treatment of choice for patients with type 1 diabetes and end-stage renal disease. Rapamycin and mycophenolate mofetil (MMF) have been used for maintenance immunosuppression with tacrolimus in SPKT; however, long-term outcomes are lacking. From September 2000 through December 2009, 170 SPKT recipients were enrolled in a randomized, prospective trial receiving Rapamycin (n = 84) or MMF (n = 86). All patients received dual induction therapy with thymoglobulin and daclizumab, and low-dose maintenance tacrolimus and corticosteroids. Compared to MMF, rates of freedom from first biopsy-proven acute kidney or pancreas rejection were superior for Rapamycin at year 1 (kidney: 100% vs. 88%; P = 0.001; pancreas: 99% vs. 92%; P = 0.04) and at year 10 (kidney: 88% vs. 71%, P = 0.01; pancreas: 99% vs. 89%, P = 0.01). The higher rates of rejection were associated with withholding MMF (vs. Rapamycin, p = 0.009), generally for gastrointestinal or bone marrow toxicity. There was no significant difference in creatinine, proteinuria, c-peptide, viral infections, lymphoproliferative disorders or posttransplant diabetes. HbA1C and lipid levels were normal in both groups, although higher in the Rapamycin arm. There were no significant differences in patient or allograft survival. In this 10-year SPKT study, Rapamycin in combination with tacrolimus was better tolerated and more effective than MMF. Overall, the patient and allograft survival were equivalent. PMID:22946986
Brain 18F-FDG PET Metabolic Abnormalities in Patients with Long-Lasting Macrophagic Myofascitis.
Van Der Gucht, Axel; Aoun Sebaiti, Mehdi; Guedj, Eric; Aouizerate, Jessie; Yara, Sabrina; Gherardi, Romain K; Evangelista, Eva; Chalaye, Julia; Cottereau, Anne-Ségolène; Verger, Antoine; Bachoud-Levi, Anne-Catherine; Abulizi, Mukedaisi; Itti, Emmanuel; Authier, François-Jérôme
2017-03-01
The aim of this study was to characterize brain metabolic abnormalities in patients with macrophagic myofascitis (MMF) and the relationship with cognitive dysfunction through the use of PET with 18 F-FDG. Methods: 18 F-FDG PET brain imaging and a comprehensive battery of neuropsychological tests were performed in 100 consecutive MMF patients (age [mean ± SD], 45.9 ± 12 y; 74% women). Images were analyzed with statistical parametric mapping (SPM12). Through the use of analysis of covariance, all 18 F-FDG PET brain images of MMF patients were compared with those of a reference population of 44 healthy subjects similar in age (45.4 ± 16 y; P = 0.87) and sex (73% women; P = 0.88). The neuropsychological assessment identified 4 categories of patients: those with no significant cognitive impairment ( n = 42), those with frontal subcortical (FSC) dysfunction ( n = 29), those with Papez circuit dysfunction ( n = 22), and those with callosal disconnection ( n = 7). Results: In comparison with healthy subjects, the whole population of patients with MMF exhibited a spatial pattern of cerebral glucose hypometabolism ( P < 0.001) involving the occipital lobes, temporal lobes, limbic system, cerebellum, and frontoparietal cortices, as shown by analysis of covariance. The subgroup of patients with FSC dysfunction exhibited a larger extent of involved areas (35,223 voxels vs. 13,680 voxels in the subgroup with Papez circuit dysfunction and 5,453 voxels in patients without cognitive impairment). Nonsignificant results were obtained for the last subgroup because of its small population size. Conclusion: Our study identified a peculiar spatial pattern of cerebral glucose hypometabolism that was most marked in MMF patients with FSC dysfunction. Further studies are needed to determine whether this pattern could represent a diagnostic biomarker of MMF in patients with chronic fatigue syndrome and cognitive dysfunction. © 2017 by the Society of Nuclear Medicine and Molecular Imaging.
77 FR 69455 - Proposed Recommendations Regarding Money Market Mutual Fund Reform
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-19
... share and other factors as discussed below. MMFs' activities and practices give rise to a structural...'' (Oct. 25, 2012), available at http://www.ici.org/research/stats/mmf . MMFs are a convenient and cost... http://www.ici.org/research/stats/mmf ; ICI Fact Book, at Table 39. \\6\\ See ICI Fact Book, at Table 5...
ERIC Educational Resources Information Center
Fries, Karen M.
2013-01-01
Students with specific learning disabilities (SLD) in mathematics can typically experience long-lasting problems when developing fluency with basic math facts despite the use of evidence-based practices. One recently developed intervention to promote memorization and fact-fluency is Mastering Math Facts (MMF). MMF is a commercially-available…
Enteric-coated mycophenolate sodium experience in liver transplant patients.
Cantisani, G P C; Zanotelli, M L; Gleisner, A L M; de Mello Brandão, A; Marroni, C A
2006-04-01
Mycophenolate sodium (EC-MPS) has been shown to be as effective and as safe as mycophenolate mofetil (MMF) in renal transplant patients. Nevertheless, compared to MMF its use in liver transplant patients has been limited. The purpose of this study was to analyze the efficacy of EC-MPS as a primary immunosuppressant or as a replacement for MMF in liver transplant patients. Ninety among 470 liver transplant recipients were receiving or had added an antimetabolite to their immunosuppressant therapy. The most common reason for this change was renal dysfunction (47.8%) or diabetes (32.2%). EC-MPS was started at a median of 30 months after liver transplantation. The mean administered daily dose was 720 mg/d. At least one gastrointestinal symptom was reported by 25 patients. Abdominal pain (16.6%) and diarrhea (14.5%) were the most frequent. EC-MPS had to be discontinued in two patients, while six others required dose reduction to resolve the symptoms. Hematological adverse events were infrequent: three patients had leukopenia and one, anemia, all of which responded to dosage reduction. There was a creatinine reduction within 6 months of drug commencement and maintenance of the lower creatinine levels at 1 year among patients who began EC-MPS for renal dysfunction. Serum low-density lipoprotein cholesterol and triglyceride levels were significantly lower among patients on EC-MPS than on MMF. In conclusion, EC-MPS appears to have a similar efficacy and safety profile as MMF in liver transplant patients. Hematological and gastrointestinal adverse events were infrequent; seldom had the drug to be discontinued.
Kizawa, Toshitaka; Nozawa, Tomo; Kikuchi, Masako; Nagahama, Kiyotaka; Okudela, Koji; Miyamae, Takako; Imagawa, Tomoyuki; Nakamura, Tomoko; Mori, Masaaki; Yokota, Shumpei; Tsutsumi, Hiroyuki
2015-03-01
We evaluated histological changes occurring in renal biopsy specimens, between the time before initial induction therapy and after 12 months' maintenance therapy, as well as changes in laboratory parameters, SLE disease activity (SLEDAI), and dosage of corticosteroid (CS) in childhood-onset systemic lupus erythematosus (SLE) patients treated with mycophenolate mofetil (MMF). A retrospective analysis was performed on nine patients diagnosed with childhood-onset SLE and lupus nephritis. They were treated with pulsed mPSL and intravenous cyclophosphamide as induction therapy and MMF (500-1500 mg/day) plus CS as maintenance therapy. Renal biopsy was performed before the initial induction therapy and after 12 months' maintenance therapy. Pathological findings at second biopsy were improved in eight of nine patients (89%). The findings of SLEDAI, urinalysis, and blood tests also showed improvement. CS doses could be tapered satisfactorily. Adverse events were observed in two patients. No patients treated with MMF experienced any disease flares during maintenance therapy. MMF as maintenance therapy might be useful in that not only the histological findings of lupus nephritis were improved, but also CS doses could be beneficially tapered. Nonetheless, this is a retrospective report of only nine cases and further prospective multicenter studies are necessary.
Ma, Lin; Hanzawa, Nobutomo; Tsujikawa, Kyozo; Azuma, Yuji
2012-10-22
We demonstrated ultra-wideband wavelength division multiplexing (WDM) transmission from 850 to 1550 nm in graded-index multi-mode fiber (GI-MMF) using endlessly single-mode photonic crystal fiber (ESM-PCF) as a launch device. Effective single-mode guidance is obtained in multi-mode fiber at all wavelengths by splicing cm-order length ESM-PCF to the transmission fiber. We achieved 3 × 10 Gbit/s WDM transmission in a 1 km-long 50-μm-core GI-MMF. We also realized penalty free 10 Gbit/s data transmission at a wavelength of 850 nm by optimizing the PCF structure. This method has the potential to achieve greater total transmission capacity for MMF systems by the addition of more wavelength channels.
Multimode interference tapered fiber refractive index sensors.
Biazoli, Claudecir R; Silva, Susana; Franco, Marcos A R; Frazão, Orlando; Cordeiro, Cristiano M B
2012-08-20
Real-time monitoring of the fabrication process of tapering down a multimode-interference-based fiber structure is presented. The device is composed of a pure silica multimode fiber (MMF) with an initial 125 μm diameter spliced between two single-mode fibers. The process allows a thin MMF with adjustable parameters to obtain a high signal transmittance, arising from constructive interference among the guided modes at the output end of the MMF. Tapered structures with waist diameters as low as 55 μm were easily fabricated without the limitation of fragile splices or difficulty in controlling lateral fiber alignments. The sensing device is shown to be sensitive to the external environment, and a maximum sensitivity of 2946 nm/refractive index unit in the refractive index range of 1.42-1.43 was attained.
The World Meteorological Organization’s (WMO) Global Atmosphere Watch (GAW) Programme coordinates high-quality observations of atmospheric composition from global to local scales with the aim to drive high-quality and high-impact science while co-producing a new generation of pro...
Vieira, D C S; Serpa, D; Nunes, J P C; Prats, S A; Neves, R; Keizer, J J
2018-08-01
Wildfires have become a recurrent threat for many Mediterranean forest ecosystems. The characteristics of the Mediterranean climate, with its warm and dry summers and mild and wet winters, make this a region prone to wildfire occurrence as well as to post-fire soil erosion. This threat is expected to be aggravated in the future due to climate change and land management practices and planning. The wide recognition of wildfires as a driver for runoff and erosion in burnt forest areas has created a strong demand for model-based tools for predicting the post-fire hydrological and erosion response and, in particular, for predicting the effectiveness of post-fire management operations to mitigate these responses. In this study, the effectiveness of two post-fire treatments (hydromulch and natural pine needle mulch) in reducing post-fire runoff and soil erosion was evaluated against control conditions (i.e. untreated conditions), at different spatial scales. The main objective of this study was to use field data to evaluate the ability of different erosion models: (i) empirical (RUSLE), (ii) semi-empirical (MMF), and (iii) physically-based (PESERA), to predict the hydrological and erosive response as well as the effectiveness of different mulching techniques in fire-affected areas. The results of this study showed that all three models were reasonably able to reproduce the hydrological and erosive processes occurring in burned forest areas. In addition, it was demonstrated that the models can be calibrated at a small spatial scale (0.5 m 2 ) but provide accurate results at greater spatial scales (10 m 2 ). From this work, the RUSLE model seems to be ideal for fast and simple applications (i.e. prioritization of areas-at-risk) mainly due to its simplicity and reduced data requirements. On the other hand, the more complex MMF and PESERA models would be valuable as a base of a possible tool for assessing the risk of water contamination in fire-affected water bodies and for testing different land management scenarios. Copyright © 2018 Elsevier Inc. All rights reserved.
Albrecht, Maike; Henke, Julia; Tacke, Sabine; Markert, Michael; Guth, Brian
2014-08-23
This study investigated effects on cardiovascular parameters during anaesthesia with isoflurane (ISO, 2-3 Vol%), ketamine-xylazine (KX, 100 mg•kg(-1) + 5 mg•kg(-1)) or a combination of medetomidine-midazolam-fentanyl (MMF, 0.15 mg•kg(-1) + 2.0 mg•kg(-1) + 0.005 mg•kg(-1)) in rats throughout induction, maintenance and recovery from anaesthesia. Rats were instrumented with a telemetric system for the measurement of systolic, diastolic and mean arterial pressure (SAP, DAP, MAP), pulse pressure (PP), heart rate (HR) and core body temperature (BT). The parameters were continuously measured before, during and after each type of anaesthesia. Forty minutes after induction, ISO delivery was terminated and MMF was antagonized with atipamezole-flumazenil-naloxone (AFN, 0.75 mg•kg(-1) + 0.2 mg•kg(-1) + 0.12 mg•kg(-1)) whereas KX was not antagonized. Differences were observed between anaesthesias with KX (301 min) lasting much longer than MMF (45 min) and ISO (43 min). HR in ISO ([Formula: see text] = 404 ± 25 bpm) increased during the time of surgical tolerance whereas a HR decrease was observed in KX ([Formula: see text] = 255 ± 26 bpm) and MMF ([Formula: see text] = 209 ± 24 bpm). In ISO (MAP during time of surgical tolerance: [Formula: see text] = 89 ± 12.3 mmHg) and KX (MAP during wake-up period: [Formula: see text] = 84 ± 8.5 mmHg) mild hypotensive values were observed, whereas blood pressure (BP) in MMF (MAP during time of surgical tolerance: [Formula: see text] = 138 ± 9.9 mmHg) increased. Despite keeping animals on a warming pad, a loss of BT of about 1°C was seen in all groups. Additionally, we observed a peaked increase of HR ([Formula: see text] = 445 ± 20 bpm) during the wake-up period with ISO and an increase of PP ([Formula: see text] = 59 ± 8.5 mmHg) in MMF during the time of surgical tolerance. The anaesthesias influenced very differently the cardiovascular parameters measured in Wistar rats. ISO caused mild hypotension and increased HR whereas MMF produced a marked hypertension and a significant decrease of HR. The slightest alterations of BP, HR and BT were observed using KX, but the long wake-up and recovery period suggest the need for prolonged monitoring.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tao, Wei-Kuo; Houze, Robert, A., Jr.; Zeng, Xiping
This three-year project, in cooperation with Professor Bob Houze at University of Washington, has been successfully finished as planned. Both ARM (the Atmospheric Radiation Measurement Program) data and cloud-resolving model (CRM) simulations were used to identify the water budgets of clouds observed in two international field campaigns. The research results achieved shed light on several key processes of clouds in climate change (or general circulation models), which are summarized below. 1. Revealed the effect of mineral dust on mesoscale convective systems (MCSs) Two international field campaigns near a desert and a tropical coast provided unique data to drive and evaluatemore » CRM simulations, which are TWP-ICE (the Tropical Warm Pool International Cloud Experiment) and AMMA (the African Monsoon Multidisciplinary Analysis). Studies of the two campaign data were contrasted, revealing that much mineral dust can bring about large MCSs via ice nucleation and clouds. This result was reported as a PI presentation in the 3rd ASR Science Team meeting held in Arlington, Virginia in March 2012. A paper on the studies was published in the Journal of the Atmospheric Sciences (Zeng et al. 2013). 2. Identified the effect of convective downdrafts on ice crystal concentration Using the large-scale forcing data from TWP-ICE, ARM-SGP (the Southern Great Plains) and other field campaigns, Goddard CRM simulations were carried out in comparison with radar and satellite observations. The comparison between model and observations revealed that convective downdrafts could increase ice crystal concentration by up to three or four orders, which is a key to quantitatively represent the indirect effects of ice nuclei, a kind of aerosol, on clouds and radiation in the Tropics. This result was published in the Journal of the Atmospheric Sciences (Zeng et al. 2011) and summarized in the DOE/ASR Research Highlights Summaries (see http://www.arm.gov/science/highlights/RMjY5/view). 3. Used radar observations to evaluate model simulations In cooperation with Profs. Bob Houze at University of Washington and Steven Rutledge at Colorado State University, numerical model results were evaluated with observations from W- and C-band radars and CloudSat/TRMM satellites. These studies exhibited some shortcomings of current numerical models, such as too little of thin anvil clouds, directing the future improvement of cloud microphysics parameterization in CRMs. Two papers of Powell et al (2012) and Zeng et al. (2013), summarizing these studies, were published in the Journal of the Atmospheric Sciences. 4. Analyzed the water budgets of MCSs Using ARM data from TWP-ICE, ARM-SGP and other field campaigns, the Goddard CRM simulations were carried out to analyze the water budgets of clouds from TWP-ICE and AMMA. The simulations generated a set of datasets on clouds and radiation, which are available http://cloud.gsfc.nasa.gov/. The cloud datasets were available for modelers and other researchers aiming to improve the representation of cloud processes in multi-scale modeling frameworks, GCMs and climate models. Special datasets, such as 3D cloud distributions every six minutes for TWP-ICE, were requested and generated for ARM/ASR investigators. Data server records show that 86,206 datasets were downloaded by 120 users between April of 2010 and January of 2012. 5. MMF simulations The Goddard MMF (multi-scale modeling framework) has been improved by coupling with the Goddard Land Information System (LIS) and the Goddard Earth Observing System Model, Version 5 (GOES5). It has also been optimized on NASA HEC supercomputers and can be run over 4000 CPUs. The improved MMF with high horizontal resolution (1 x 1 degree) is currently being applied to cases covering 2005 and 2006. The results show that the spatial distribution pattern of precipitation rate is well simulated by the MMF through comparisons with satellite retrievals from the CMOPRH and GPCP data sets. In addition, the MMF results were compared with three reanalyses (MERRA, ERA-Interim and CFSR). Although the MMF tends to produce a higher precipitation rate over some topical regions, it actually well captures the variations in the zonal and meridional means. Among the three reanalyses, ERA-Interim seems to have values close to those of the satellite retrievals especially for GPCP. It is interesting to note that the MMF obtained the best results in the rain forest of Africa even better than those of CFSR and ERA-Interim, when compared to CMORPH. MERRA fails to capture the precipitation in this region. We are now collaborating with Steve Rutledge (CSU) to validate the model results for AMMA 6. MC3E and the diurnal variation of precipitation processes The Midlatitude Continental Convective Clouds Experiment (MC3E) was a joint field campaign between the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility and the NASA Global Precipitation Measurement (GPM) mission Ground Validation (GV) program. It took place in central Oklahoma during the period April 22 _ June 6, 2011. Some of its major objectives involve the use of CRMs in precipitation science such as: (1) testing the fidelity of CRM simulations via intensive statistical comparisons between simulated and observed cloud properties and latent heating fields for a variety of case types, (2) establishing the limits of CRM space-time integration capabilities for quantitative precipitation estimates, and (3) supporting the development and refinement of physically-based GMI, DPR, and DPR-GMI combined retrieval algorithms using ground-based GPM GV Ku-Ka band radar and CRM simulations. The NASA unified WRF model (nu-WRF) was used for real time forecasts during the field campaign, and ten precipitation events were selected for post mission simulations. These events include well-organized squall lines, scattered storms and quasi-linear storms. A paper focused on the diurnal variation of precipitation will be submitted in September 2012. The major highlights are as follows: a. The results indicate that NU-WRF model could capture observed diurnal variation of rainfall (composite not individual); b. NU-WRF model could simulate two different types (propagating and local type) of the diurnal variation of rainfall; c. NU-WRF model simulation show very good agreement with observation in terms of precipitation pattern (linear MCS), radar reflectivity (a second low peak shallow convection); d. NU-WRF model simulation indicates that the cool-pool dynamic is the main physical process for MCS propagation speed; e. Surface heat fluxes (including land surface model and initial surface condition) do not play a major role in phase of diurnal variation (change rainfall amount slightly); f. Terrain effect is important for initial stage of MCS (rainfall is increased and close to observation by increasing the terrain height that is also close to observed); g. Diurnal variation of radiation is not important for the simulated variation of rainfall. Publications: Zeng, X., W.-K. Tao, S. Powell, R. Houze, Jr., P. Ciesielski, N. Guy, H. Pierce and T. Matsui, 2012: A comparison of the water budgets between clouds from AMMA and TWP-ICE. J. Atmos. Sci., 70, 487-503. Powell, S. W., R. A. Houze, Jr., A. Kumar, and S. A. McFarlane, 2012: Comparison of simulated and observed continental tropical anvil clouds and their radiative heating profiles. J. Atmos. Sci., 69, 2662-2681. Zeng, X., W.-K. Tao, T. Matsui, S. Xie, S. Lang, M. Zhang, D. Starr, and X. Li, 2011: Estimating the Ice Crystal Enhancement Factor in the Tropics. J. Atmos. Sci., 68, 1424-1434. Conferences: Zeng, X., W.-K. Tao, S. Powell, R. Houze, Jr., P. Ciesielski, N. Guy, H. Pierce and T. Matsui, 2012: Comparison of water budget between AMMA and TWP-ICE clouds. The 3rd Annual ASR Science Team Meeting. Arlington, Virginia, Mar. 12-16, 2012. Zeng, X., W.-K. Tao, S. Powell, R. A. Houze Jr., and P. Ciesielski, 2011: Comparing the water budgets between AMMA and TWP-ICE clouds. Fall 2011 ASR Working Group Meeting. Annapolis, September 12-16, 2011. Zeng, X. et al., 2011: Introducing ice nuclei into turbulence parameterizations in CRMs. Fall 2011 ASR Working Group Meeting. Annapolis, September 12-16, 2011.« less
Miller, Robert C.; Schwartz, David J.; Sloan, Jeff A.; Griffin, Patricia C.; Deming, Richard L.; Anders, Jon C.; Stoffel, Thomas J.; Haselow, Robert E.; Schaefer, Paul L.; Bearden, James D.; Atherton, Pamela J.; Loprinzi, Charles L.; Martenson, James A.
2010-01-01
Purpose A 2-arm, double-blinded, randomized trial to evaluate the effect of 0.1% mometasone furoate (MMF) on acute skin-related toxicity in patients undergoing breast or chest wall radiotherapy. Methods and Materials Patients with ductal carcinoma in situ or invasive breast carcinoma receiving external beam radiotherapy to breast or chest wall were randomly assigned to daily apply 0.1% MMF or placebo cream. Primary study end point was provider-assessed maximum grade of Common Terminology Criteria for Adverse Events (CTCAE) version 3.0 radiation dermatitis. Secondary end points included provider-assessed CTCAE grade 3 or greater radiation dermatitis and adverse-event monitoring. Patient-reported outcome (PRO) measures included the Skindex-16, the Skin Toxicity Assessment Tool, a Symptom Experience Diary, and quality of life self-assessment. Assessment was performed at baseline, weekly during radiotherapy, and for 2 weeks after radiotherapy. Results In total, 176 patients were enrolled from September 21, 2007 through December 7, 2007. The provider-assessed primary end point showed no difference in mean maximum grade of radiation dermatitis by treatment arm (1.2 for MMF vs 1.3 for placebo; P=.18). CTCAE toxicity was greater in placebo group (P=.04), primarily from pruritus. For PRO measures, the maximum Skindex-16 score for MMF group showed less itching (P=.008), less irritation (P=.01), less symptom persistence or recurrence (P=.02), and less annoyance with skin problems (P=.04); the group's maximum Skin Toxicity Assessment Tool score showed less burning sensation (P=.02) and less itching (P=.002). Conclusion Patients receiving daily MMF during radiotherapy may experience reduced acute skin toxicity in comparison to placebo. PMID:20800381
Kang, Yunhee; Kim, Jane; Seo, Eunkyo
2018-01-01
Few studies have explored the potential of social capital in improving child nutritional status; however, most components of pathways between social capital and nutritional status have remained unexplained. Complementary feeding practice is a strong mediator of child nutritional status. This study examined the association between complementary feeding practice and maternal social capital in rural Ethiopia, using cross-sectional data of infant aged 6-12 months and their mother pairs (n = 870). The Short Social Capital Assessment Tool was used to assess maternal structural (i.e., community group membership, having emotional/economic support from individuals, and citizenship activities) and cognitive social capital (i.e., trust, social harmony, and sense of belonging) in the past 12 months. Infant's dietary diversity score (DDS, range: 0-7), minimum dietary diversity (MDD), and minimum meal frequency (MMF) were assessed using a 24-hr dietary recall. Multivariable ordinal/binary logistic regression analyses were conducted. Having support from two or more individuals was associated with higher DDS (OR = 1.84) and meeting a minimum level of dietary diversity (MDD: OR = 5.20) but not with MMF, compared to those having no support. Having two or more group memberships was associated with higher DDS (OR = 2.2) but not with MDD or MMF, compared to those without group membership. Citizenship activities showed mixed associations with MMF and no association with DDS or MDD. Cognitive social capital showed no association with DDS or MDD and lower odds of meeting MMF (OR = 0.56). These mixed results call for further studies to examine other potential pathways (e.g., hygiene and caring behaviours) in which social capital could improve child nutritional status. © 2017 John Wiley & Sons Ltd.
Ugrasbul, Figen; Moore, Wayne V; Tong, Pei Ying; Kover, Karen L
2008-12-01
Anti-CD25 and mycophenolate mofetil (MMF) treatment of patients with new-onset diabetes is currently being tested as one of the trials in TrialNet. We tested the effectiveness of MMF and anti-CD25 in preventing autoimmune diabetes in the diabetes-resistant biobreeding (DRBB) rat. Autoimmune diabetes in the DRBB rat was induced with a Treg cell depletion regimen starting at 24-26 d of age. Treatment was started on the first day of the depletion regimen in the following groups: (i) control (vehicle); (ii) MMF 25 mg/kg/d intramuscularly daily for 8 wk; (iii) anti-CD25 0.8 mg/kg/d intraperitoneally 5 d/wk for 3 wk; and (iv) combination of MMF and anti-CD25. In a second set of experiments, treatments were started on day 5 of the depletion regimen (delayed treatment) with groups 1, 3, and 4. Rats that had diabetes-free survival for at least 30 d after the treatment was stopped underwent a second Treg depletion (redepletion). In each of the three treatment groups (n = 10/group), onset of diabetes was delayed or prevented in 20, 40 and 80% in groups 2, 3, and 4, respectively. After redepletion, diabetes-free survival was unchanged in group 2 and decreased to 10 and 30% in groups 3 and 4, respectively. With delayed treatment, groups 3 and 4 had 33 and 50% diabetes-free survival that decreased to 0 and 33% after redepletion. MMF and anti-CD25 alone or in combination are effective in delaying and preventing diabetes in the DRBB rat especially if treatment is started before stimulation and expansion of the autoreactive T cells.
Effect of Immunosuppressive Agents on Hepatocyte Apoptosis Post-Liver Transplantation
Lim, Eu Jin; Chin, Ruth; Nachbur, Ueli; Silke, John; Jia, Zhiyuan; Angus, Peter W.; Torresi, Joseph
2015-01-01
Introduction Immunosuppressants are used ubiquitously post-liver transplantation to prevent allograft rejection. However their effects on hepatocytes are unknown. Experimental data from non-liver cells indicate that immunosuppressants may promote cell death thereby driving an inflammatory response that promotes fibrosis and raises concerns that a similar effect may occur within the liver. We evaluated apoptosis within the liver tissue of post-liver transplant patients and correlated these findings with in vitro experiments investigating the effects of immunosuppressants on apoptosis in primary hepatocytes. Methods Hepatocyte apoptosis was assessed using immunohistochemistry for M30 CytoDEATH and cleaved PARP in human liver tissue. Primary mouse hepatocytes were treated with various combinations of cyclosporine, tacrolimus, sirolimus, or MMF. Cell viability and apoptosis were evaluated using crystal violet assays and Western immunoblots probed for cleaved PARP and cleaved caspase 3. Results Post-liver transplant patients had a 4.9-fold and 1.7-fold increase in M30 CytoDEATH and cleaved PARP compared to normal subjects. Cyclosporine and tacrolimus at therapeutic concentrations did not affect hepatocyte apoptosis, however when they were combined with MMF, cell death was significantly enhanced. Cell viability was reduced by 46% and 41%, cleaved PARP was increased 2.6-fold and 2.2-fold, and cleaved caspase 3 increased 2.2-fold and 1.8-fold following treatment with Cyclosporine/MMF and Tacrolimus/MMF respectively. By contrast, the sirolimus/MMF combination did not significantly reduce hepatocyte viability or promote apoptosis. Conclusion Commonly used immunosuppressive drug regimens employed after liver transplantation enhance hepatocyte cell death and may thus contribute to the increased liver fibrosis that occurs in a proportion of liver transplant recipients. PMID:26390404
Mizoribine and mycophenolate mofetil.
Ishikawa, H
1999-07-01
Both mizoribine (MZR) and mycophenolate mofetil (MMF) are immunosuppressive agents that inhibit the proliferation of lymphocytes selectively, via inhibition of IMPDH. MZR is a nucleoside of the imidazole class, isolated from the culture medium of the mold Eupenicillium brefeldianum M-2166. Although this compound has been found to have weak antimicrobial activity against Candida albicans, it has proved ineffective against experimental candidiasis. Unlike azathioprine, this compound is not taken up by nucleic acids in the cell. Instead, after phosphorylation MZR-5 -monophosphate inhibits GMP synthesis by the antagonistic blocking of IMPDH (Ki = 10(-8)M) and GMP- synthetase (Ki =10(-5) M). The drug has been found to inhibit both humoral and cellular immunity, and on this basis it was developed in Japan as an immunosuppressant. MZR has been shown in animal experiments to lack oncogenicity, and has been shown clinically to be associated with a low incidence of severe adverse reactions. MZR has been registered in Japan for the prevention of rejection in renal transplantation, and for the treatment of lupus nephritis, rheumatoid arthritis and the nephrotic syndrome. MMF is the morpholinoethyl ester prodrug of mycophenolic acid (MPA), which was first isolated in 1896 from the culture media of several Penicillium species. MPA has been evaluated for its unique properties as an anticancer, antiviral, antifungal and antibacterial agent, as well as for its therapeutic use in psoriasis and rheumatoid arthritis. MMF was designed to enhance the oral bioavailability of the parent compound. After beneficial effects were observed in animals, the clinical efficacy of MMF as an immunosuppressant in renal transplantation was studied in the United States. In 1995 the US Food and Drug Administration (FDA) approved the use of MMF for the prevention of rejection in renal transplantation, the drug also available on a number of European markets.
Calibration for single multi-mode fiber digital scanning microscopy imaging system
NASA Astrophysics Data System (ADS)
Yin, Zhe; Liu, Guodong; Liu, Bingguo; Gan, Yu; Zhuang, Zhitao; Chen, Fengdong
2015-11-01
Single multimode fiber (MMF) digital scanning imaging system is a development tendency of modern endoscope. We concentrate on the calibration method of the imaging system. Calibration method comprises two processes, forming scanning focused spots and calibrating the couple factors varied with positions. Adaptive parallel coordinate algorithm (APC) is adopted to form the focused spots at the multimode fiber (MMF) output. Compare with other algorithm, APC contains many merits, i.e. rapid speed, small amount calculations and no iterations. The ratio of the optics power captured by MMF to the intensity of the focused spots is called couple factor. We setup the calibration experimental system to form the scanning focused spots and calculate the couple factors for different object positions. The experimental result the couple factor is higher in the center than the edge.
Borghi, Alessandro; Minghetti, Sara; Toni, Giulia; Virgili, Annarosa; Corazza, Monica
2017-09-01
Abstrract Purpose: To assess efficacy and safety profile of combining a potent corticosteroid with a retinoid in the treatment of vulvar lichen sclerosus (VLS). We retrospectively compared 21 VLS patients treated with tretinoin (T) in short-contact therapy and mometasone furoate (MMF) (group A) and 20 treated with cold cream (CC) and MMF (group B) for 5 consecutive days/week for 12 weeks. The efficacy parameters were the response rate, the percentage of patients achieving an improvement from baseline of ≥75% in subjective and objective scores and the mean reduction in subjective and objective scores. Thirteen patients (75.2%) were considered as responders in group A and 15 (78.9%) in group B; 50% and 61.1% of patients in group A and 100% and 63.1% in group B achieved an improvement of at least 75% in subjective and objective scores, respectively. The scheme combining MMF and CC was better tolerated than the combination of MMF and T. The combination with a topical retinoid did not enhance the effectiveness of a potent corticosteroid in the treatment of VLS. Either the scarce efficacy of the short-contact therapy regimen or a less favorable safety profile of such combination may account for these findings.
Blaheta, R A; Nelson, K; Oppermann, E; Leckel, K; Harder, S; Cinatl, J; Weber, S; Shipkova, M; Encke, A; Markus, B H
2000-05-15
Prostaglandin E2 (PGE2) is a powerful endogenous immune suppressant and interferes with various T-cell functions. However, it is not known in detail whether immunosuppressive drugs influence the PGE2-driven immune response in transplant patients. Therefore, we investigated the effect of several immunosuppressive compounds, in particular the novel drug mycophenolate mofetil (MMF), on endothelial PGE2 release. Endothelial cells (HUVEC) were activated by either allogeneic CD4+ or CD8+ T cells, or by the cytokines interleukin-1 or gamma-interferon. Using an enzyme-linked immunosorbent assay, we analyzed PGE2 release of the activated HWEC in the presence of MMF, cyclosporine, or tacrolimus. As verapamil and mibefradil also possess immunosuppressive properties, they were included in the study as well. Activation of HUVEC with interleukin-1 or T cells resulted in a drastic accumulation of PGE2 in the supernatant. Cyclosporine or tacrolimus had no effect on PGE2 release. However, Ca2+ channel blockers, when applied at higher dosages, caused a significant increase in PGE2. Interestingly, MMF strongly diminished the PGE2 level in the cell culture supernatant in a concentration-dependent manner. The results demonstrate an inhibitory effect of MMF on PGE2 production, which may lower the benefits of the PGE2-triggered immune response after organ transplantation.
NASA Astrophysics Data System (ADS)
Chu, S. Y.; Hwang, Y. J.; Choi, S.; Na, J. B.; Kim, Y. J.; Chang, K. S.; Bae, D. K.; Lee, C. Y.; Ko, T. K.
2011-11-01
A high speed electromagnetic suspension (EMS) maglev has emerged as the solution to speed limit problem that conventional high-speed railroad has. In the EMS maglev, small levitation gap needs uniform guide-way which leads to increase the construction cost. The large levitation gap can reduce the construction cost. However it is hard for normal conducting electromagnet to produce larger magneto-motive force (MMF) for generating levitation force as increased levitation gap. This is because normal conductors have limited rating current to their specific volume. Therefore, the superconducting electromagnet can be one of the solutions for producing both large levitation gap and sufficient MMF. The superconducting electromagnets have incomparably high allowable current density than what normal conductors have. In this paper, the prototype of high temperature superconducting (HTS) electromagnets were designed and manufactured applicable to hybrid electromagnetic suspension system (H-EMS). The H-EMS consists of control coils for levitation control and superconducting coils for producing MMF for levitation. The required MMF for generating given levitation force was calculated by both equations of ideal U-core magnet and magnetic field analysis using the finite element method (FEM). The HTS electromagnets were designed as double pancakes with Bi-2223/Ag tapes. Experiments to confirm its operating performance were performed in liquid nitrogen (LN2).
NASA Astrophysics Data System (ADS)
Wu, Bo; Zhou, Xian; Ma, Yanan; Luo, Jun; Zhong, Kangping; Qiu, Shaofeng; Feng, Zhiyong; Luo, Yazhi; Agustin, Mikel; Ledentsov, Nikolay; Kropp, Joerg; Shchukin, Vitaly; Ledentsov, Nikolay N.; Eddie, Iain; Chao, Lu
2016-03-01
Discrete Multitone Transmission (DMT) transmission over standard multimode fiber (MMF) using high-speed single (SM) and multimode (MM) Vertical-Cavity Surface-Emitting Lasers (VCSELs) is studied. Transmission speed in the range of 72Gbps to 82Gbps over 300m -100m distances of OM4 fiber is realized, respectively, at Bit-Error-Ratio (BER) <5e-3 and the received optical power of only -5dBm. Such BER condition requires only 7% overhead for the conversion to error-free operation using single Bose-Chaudhuri-Hocquenghem forward error correction (BCH-FEC) coding and decoding. SM VCSEL is demonstrated to provide a much higher data transmission capacity over MMF. For 100m MMF transmission SM VCSEL allows 82Gbps as compared to MM VCSEL resulting in only 34Gbps at the same power (-5dBm). Furthermore, MM VCSEL link at 0dBm is still restricted at 100m distance by 63Gbps while SM VCSEL can exceed 100Gbps at such power levels. We believe that with further improvement in SM VCSELs and fiber coupling >100Gbps data transmission over >300m MMF distances at the BER levels matching the industry standards will become possible.
VizieR Online Data Catalog: Planck Sunyaev-Zeldovich sources (PSZ2) (Planck+, 2016)
NASA Astrophysics Data System (ADS)
Planck Collaboration; Ade, P. A. R.; Aghanim, N.; Arnaud, M.; Ashdown, M.; Aumont, J.; Baccigalupi, C.; Banday, A. J.; Barreiro, R. B.; Barrena, R.; Bartlett, J. G.; Bartolo, N.; Battaner, E.; Battye, R.; Benabed, K.; Benoit, A.; Benoit-Levy, A.; Bernard, J.-P.; Bersanelli, M.; Bielewicz, P.; Bikmaev, I.; Bohringer, H.; Bonaldi, A.; Bonavera, L.; Bond, J. R.; Borrill, J.; Bouchet, F. R.; Bucher, M.; Burenin, R.; Burigana, C.; Butler, R. C.; Calabrese, E.; Cardoso, J.-F.; Carvalho, P.; Catalano, A.; Challinor, A.; Chamballu, A.; Chary, R.-R.; Chiang, H. C.; Chon, G.; Christensen, P. R.; Clements, D. L.; Colombi, S.; Colombo, L. P. L.; Combet, C.; Comis, B.; Couchot, F.; Coulais, A.; Crill, B. P.; Curto, A.; Cuttaia, F.; Dahle, H.; Danese, L.; Davies, R. D.; Davis, R. J.; de Bernardis, P.; De Rosa, A.; de Zotti, G.; Delabrouille, J.; Desert, F.-X.; Dickinson, C.; Diego, J. M.; Dolag, K.; Dole, H.; Donzelli, S.; Dore, O.; Douspis, M.; Ducout, A.; Dupac, X.; Efstathiou, G.; Eisenhardt, P. R. M.; Elsner, F.; Ensslin, T. A.; Eriksen, H. K.; Falgarone, E.; Fergusson, J.; Feroz, F.; Ferragamo, A.; Finelli, F.; Forni, O.; Frailis, M.; Fraisse, A. A.; Franceschi, E.; Frejsel, A.; Galeotta, S.; Galli, S.; Ganga, K.; Genova-Santos, R. T.; Giard, M.; Giraud-Heraud, Y.; Gjerlow, E.; Gonzalez-Nuevo, J.; Gorski, K. M.; Grainge, K. J. B.; Gratton, S.; Gregorio, A.; Gruppuso, A.; Gudmundsson, J. E.; Hansen, F. K.; Hanson, D.; Harrison, D. L.; Hempel, A.; Henrot-Versille, S.; Hernandez-Monteagudo, C.; Herranz, D.; Hildebrandt, S. R.; Hivon, E.; Hobson, M.; Holmes, W. A.; Hornstrup, A.; Hovest, W.; Huffenberger, K. M.; Hurier, G.; Jaffe, A. H.; Jaffe, T. R.; Jin, T.; Jones, W. C.; Juvela, M.; Keihanen, E.; Keskitalo, R.; Khamitov, I.; Kisner, T. S.; Kneissl, R.; Knoche, J.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lamarre, J.-M.; Lasenby, A.; Lattanzi, M.; Lawrence, C. R.; Leonardi, R.; Lesgourgues, J.; Levrier, F.; Liguori, M.; Lilje, P. B.; Linden-Vornle, M.; Lopez-Caniego, M.; Lubin, P. M.; Macias-Perez, J. F.; Maggio, G.; Maino, D.; Mak, D. S. Y.; Mandolesi, N.; Mangilli, A.; Martin, P. G.; Martinez-Gonzalez, E.; Masi, S.; Matarrese, S.; Mazzotta, P.; McGehee, P.; Mei, S.; Melchiorri, A.; Melin, J.-B.; Mendes, L.; Mennella, A.; Migliaccio, M.; Mitra, S.; Miville-Deschenes, M.-A.; Moneti, A.; Montier, L.; Morgante, G.; Mortlock, D.; Moss, A.; Munshi, D.; Murphy, J. A.; Naselsky, P.; Nastasi, A.; Nati, F.; Natoli, P.; Netterfield, C. B.; Norgaard-Nielsen, H. U.; Noviello, F.; Novikov, D.; Novikov, I.; Olamaie, M.; Oxborrow, C. A.; Paci, F.; Pagano, L.; Pajot, F.; Paoletti, D.; Pasian, F.; Patanchon, G.; Pearson, T. J.; Perdereau, O.; Perotto, L.; Perrott, Y. C.; Perrotta, F.; Pettorino, V.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Pietrobon, D.; Plaszczynski, S.; Pointecouteau, E.; Polenta, G.; Pratt, G. W.; Prezeau, G.; Prunet, S.; Puget, J.-L.; Rachen, J. P.; Reach, W. T.; Rebolo, R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Renzi, A.; Ristorcelli, I.; Rocha, G.; Rosset, C.; Rossetti, M.; Roudier, G.; Rozo, E.; Rubino-Martin, J. A.; Rumsey, C.; Rusholme, B.; Rykoff, E. S.; Sandri, M.; Santos, D.; Saunders, R. D. E.; Savelainen, M.; Savini, G.; Schammel, M. P.; Scott, D.; Seiffert, M. D.; Shellard, E. P. S.; Shimwell, T. W.; Spence, R. L. D.; Stanford, S. A.; Stern, D.; Stolyarov, V.; Stompor, R.; Streblyanska, A.; Sudiwala, R.; Sunyaev, R.; Sutton, D.; Suur-Uski, A.-S.; Sygnet, J.-F.; Tauber, J. A.; Terenzi, L.; Toffolatti, L.; Tomasi, M.; Tramonte, D.; Tristram, M.; Tucci, M.; Tuovinen, J.; Umana, G.; Valenziano, L.; Valiviita, J.; van Tent, B.; Vielva, P.; Villa, F.; Wade, L. A.; Wandelt, B. D.; Wehus, I. K.; White, S. D. M.; Wright, E. L.; Yvon, D.; Zacchei, A.; Zonca, A.
2017-01-01
Three pipelines are used to detect SZ clusters: two independent implementations of the Matched Multi-Filter (MMF1 and MMF3), and PowellSnakes (PwS). The main catalogue is constructed as the union of the catalogues from the three detection methods. The completeness and reliability of the catalogues have been assessed through internal and external validation as described in section 4 of the paper. (5 data files).
Phase-modulated radio over fiber multimode links.
Gasulla, Ivana; Capmany, José
2012-05-21
We present the first experimental demonstration of a phase-modulated MMF link implementing high-frequency digital transmission in a cost-effective solution based on direct detection. Successful subcarrier transmission of QPSK, 16-QAM and 64-QAM data channels for bit rates up to 120 Mb/s through a 5 km MMF link is achieved over the microwave region comprised between 6 and 20 GHz. The overall capacity of the proposed approach can be further increased by properly accommodating more passband channels in the operative frequency range determined by the phase-to-intensity conversion process provided by the dispersive nature of the optical fiber. In this sense, our results show the possibility of achieving an aggregate bit rate per length product of 144 Gb/s · km and confirm, in consequence, the possibility of broadband phase-modulated radio over fiber transmission through MMF links suitable for multichannel SCM signal distribution.
Acidic resin-catalysed conversion of fructose into furan derivatives in low boiling point solvents.
Zhu, Hong; Cao, Quan; Li, Chunhu; Mu, Xindong
2011-09-27
Conversion of fructose into furan derivatives 5-hydroxymethylfurfural (HMF) and 5-methoxymethylfurfural (MMF) is performed in tetrahydrofuran (THF) and methanol-organic solvent systems, catalysed by an acidic resin Amberlyst-15. The melted fructose can be converted into HMF on the surface of the solid resin catalyst in the presence of THF as an extracting phase, which is a good solvent for HMF and other by-products. The solid resin catalyst can be reused eleven times without losing its catalytic ability, with an average HMF yield of approximately 50%. Upon the addition of methanol, the generated HMF can further react with methanol to form MMF, and the total yield of HMF and MMF could be promoted to 65%. GC-MS analysis confirms the formation of a small amount of methyl levulinate in methanolorganic solvent system. Copyright © 2011 Elsevier Ltd. All rights reserved.
Cai, W; Cai, Q; Xiong, N; Qin, Y; Lai, L; Sun, X; Hu, Y
2018-06-01
To assess the pharmacokinetic properties of mycophenolate mofetil (MMF) dispersible tablets and capsules by the enzyme multiplied immunoassay technique (EMIT) in Chinese kidney transplant recipients in the early post-transplantation phase and to develop the equations to predict mycophenolic acid (MPA) area under the 12-hour concentration-time curve (AUC 0-12h ) using a limited sampling strategy (LSS). Forty patients who underwent renal transplantation from brain-dead donors were randomly divided into dispersible tablets (Sai KE Ping; Hangzhou Zhongmei Huadong Pharma) and capsules (Cellcept; Roche Pharma, Why, NSW, Australia) groups, and treated with MMF combined with combination tacrolimus and prednisone as a basic immunosuppressive regimen. Blood samples were collected before treatment (0) and at 0.5,1, 1.5, 2, 4, 6, 8, 10, and 12 hours post-treatment and 7 days after renal transplantation. Plasma MPA concentrations were measured using EMIT. LSS equations were identified using multiple stepwise linear regression analysis. The peak concentration (C max ) in the MMF dispersible tablets (MMFdt) group (7.0 ± 2.8) mg/L was reduced compared with that in the MMF capsules (MMFc) group (10.8 ± 6.2 mg/L; P = .012); time to peak concentration in the MMFdt group was 3.2 ± 2.3 hours, which was nonsignificantly elevated compared with that of the MMFc group (2.2 ± 1.7 hours). Three-point estimation formulas were generated by multiple linear regression for both groups: MPA-AUC MMFdt = 3.542 + 3.332C 0.5h + 1.117C 1.5h + 3.946C 4h (adjusted r 2 = 0.90, P < .001); MPA-AUC MMFc = 8.149 + 1.442C 2h + 1.056C 4h + 7.133C 6h (adjusted r 2 = 0.88, P < .001). Both predicted and measured AUCs showed good consistency. After treatment with MMF dispersible tables or MMF capsules, the C max of MPA for the MMFdt group was significantly lower than that of the MMFc group; there was no significant difference in other pharmacokinetic parameters. Three-time point equations can be used as a predictable measure of the AUC 0-12h of MPA. Copyright © 2018. Published by Elsevier Inc.
Kauke, Martin; Safi, Ali-Farid; Timmer, Marco; Nickenig, Hans-Joachim; Zöller, Joachim; Kreppel, Matthias
2018-04-01
Mandibulo-maxillary fixation (MMF) is indispensable for mandibular fracture treatment. Various means for MMF have been proposed, of which arch bars are widely considered to be the mainstay. However, disadvantages to this method have initiated a quest for an alternative, leading to the introduction of MMF screws. MMF screws have frequently been criticized for poor stability of fracture sites, root damage, hardware failure, and nerve damage. We retrospectively evaluate the FAMI (Fixation and Adaptation in Mandibular Injuries) screw in mandibular fracture treatment by scanning for clinically and radiologically visible complications. In total, 534 FAMI screws were used in the successful treatment of 96 males and 34 females. Condylar fractures were most commonly encountered, representing 120 of 241 fracture sites. 15 general fracture-related complications occurred, with the most common being nerve function impairment (3.8%) and postoperative malocclusion (4.6%). In nine cases (7%), clinically visible FAMI-screw-related complications occurred, with the most prevalent being screw loosening (2.3%) and mucosal signs of inflammation (3.1%). Duration of FAMI screws was associated with the occurrence of clinically visible complications (p = 0.042). Radiologically, clinically invisible dental hard tissue damage was noted in 21 individuals (16%). Therefore, FAMI screws seem to be a reliable and safe method for mandibulo-maxillary fixation. Copyright © 2018 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Zhang, Naiqian; Wang, Zefeng; Xi, Xiaoming
2017-10-01
In this paper, we demonstrate a novel method for the low-loss coupling between solid-core multi-mode fibers (MMFs) and anti-resonant hollow-core fibers (AR-HCFs). The core/cladding diameter of the MMF is 50/125μm and the mode field diameter of the AR-HCFs are 33.3μm and 71.2μm of the ice-cream type AR-HCFs and the non-node type ARHCFs, respectively. In order to match the mode field diameters of these two specific AR-HCFs, the mode field diameter of the MMFs is increased or decreased by up-tapering or down-tapering the MMFs. Then, according to the principle of coupled fiber mode matching, the optimal diameter of tapered fiber for low-loss coupling is calculated. Based on beam propagation method, the calculated coupling losses without tapering process are 0.31dB and 0.89dB, respectively for a MMF-HCF-MMF structure of the ice-cream type AR-HCFs and the non-node type AR-HCFs. These values can be reduced to 0.096dB and 0.047dB when the outer diameters of the MMF are down-tapered to 116μm and up-tapered to 269μm, respectively. What's more, these results can also be verified by existing experiments.
Lack of correlation between phonetic magnetic mismatch field and plasma d-serine levels in humans.
Suga, Motomu; Kawakubo, Yuki; Nishimura, Yukika; Hashimoto, Kenji; Yumoto, Masato; Kasai, Kiyoto
2018-04-24
Uncovering molecular bases for auditory language processing in the human brain is a fundamental scientific challenge. The power and latency of the magnetic mismatch field (MMF) elicited by phoneme change, which are magnetoencephalographic indices of language function in its early stage of information processing, are theoretically thought to be modulated by N-methyl-d-aspartate-type glutamate receptor (NMDAR) function, but no study has yet assessed this possibility. We have thus sought to demonstrate an association between phonetic MMF power/latency and levels of plasma d-serine, an intrinsic co-agonist of glycine binding sites on NMDAR, in adults. The MMF response to phoneme changes was recorded using 204-channel magnetoencephalography in 61 healthy, right-handed, Japanese adults. Plasma levels of d- and l-serine were measured for each participant. We did not find a significant correlation between MMF power/latency and plasma serine levels. Despite a sufficient sample size, we failed to find an association between the physiological markers of the early stage of information processing of language in the auditory cortex and biomarkers indexing glutamatergic function. Our study did not indicate that a molecular index of glutamatergic function could be a surrogate marker for the early stage of information processing of language in humans. Copyright © 2018 International Federation of Clinical Neurophysiology. Published by Elsevier B.V. All rights reserved.
Haarmann, Axel; Nehen, Mathias; Deiß, Annika; Buttmann, Mathias
2015-08-13
Dimethyl fumarate (DMF) is approved for disease-modifying treatment of patients with relapsing-remitting multiple sclerosis. Animal experiments suggested that part of its therapeutic effect is due to a reduction of T-cell infiltration of the central nervous system (CNS) by uncertain mechanisms. Here we evaluated whether DMF and its primary metabolite monomethyl fumarate (MMF) modulate pro-inflammatory intracellular signaling and T-cell adhesiveness of nonimmortalized single donor human brain microvascular endothelial cells at low passages. Neither DMF nor MMF at concentrations of 10 or 50 µM blocked the IL-1β-induced nuclear translocation of NF-κB/p65, whereas the higher concentration of DMF inhibited the nuclear entry of p65 in human umbilical vein endothelium cultured in parallel. DMF and MMF also did not alter the IL-1β-stimulated activation of p38 MAPK in brain endothelium. Furthermore, neither DMF nor MMF reduced the basal or IL-1β-inducible expression of ICAM-1. In accordance, both fumaric acid esters did not reduce the adhesion of activated Jurkat T cells to brain endothelium under basal or inflammatory conditions. Therefore, brain endothelial cells probably do not directly mediate a potential blocking effect of fumaric acid esters on the inflammatory infiltration of the CNS by T cells.
Liu, Yong-jie; Liu, Wen-yao; Chen, Lin; Zhang, Han-bo; Wang, Gao-sheng
2010-09-01
Mid-montane moist evergreen broadleaved forest (MMF) and top-montane dwarf mossy forest (DMF) are the two major natural forest types in subtropical mountainous area of Ailao Mountains, Northwest China. In this paper, a comparative study was made on the microbial composition, quantity, biochemical activity, metabolic activity, and their seasonal dynamics in the canopy- and understory humus of the two forest types. The composition, quantity, and metabolic activity of the microbes in the canopy humus of dominant tree species in MMF and DMF were also analyzed. In the canopy humus of the two forest types, the amounts of fungi and actinomycetes, microbial biomass C and N, and intensities of nitrogen fixation and cellulose decomposition were significantly higher than those in understory humus. Meanwhile, the amount of cellulose-decomposing microbes (ACDM), cellulose decomposition intensity, microbial biomass C and N, and metabolic activity in the canopy humus of MMF were significantly higher than those of DMF. The amounts of bacteria, fungi, and aerobic nitrogen-fixing bacteria (ANFB) and the metabolic activity in the canopy humus of MMF and DMF were significantly higher in wet season than in dry season, while a contradictory trend was observed on the amount of actinomycetes. No significant difference was observed on the amount of ACDM between wet season and dry season. For the two forest types, the amounts of microbes and their biochemical activities in canopy humus had a larger seasonal variation range than those in understory humus. There was a significant difference in the amounts of the microbes in canopy humus among the dominant tree species in MMF and DMF, especially in wet season. The microbes in canopy humus played important roles in maintaining the biodiversity of epiphytes in the canopy, and in supplying the needed nutrients for the vigorous growth of the epiphytes.
Tasking and sharing sensing assets using controlled natural language
NASA Astrophysics Data System (ADS)
Preece, Alun; Pizzocaro, Diego; Braines, David; Mott, David
2012-06-01
We introduce an approach to representing intelligence, surveillance, and reconnaissance (ISR) tasks at a relatively high level in controlled natural language. We demonstrate that this facilitates both human interpretation and machine processing of tasks. More specically, it allows the automatic assignment of sensing assets to tasks, and the informed sharing of tasks between collaborating users in a coalition environment. To enable automatic matching of sensor types to tasks, we created a machine-processable knowledge representation based on the Military Missions and Means Framework (MMF), and implemented a semantic reasoner to match task types to sensor types. We combined this mechanism with a sensor-task assignment procedure based on a well-known distributed protocol for resource allocation. In this paper, we re-formulate the MMF ontology in Controlled English (CE), a type of controlled natural language designed to be readable by a native English speaker whilst representing information in a structured, unambiguous form to facilitate machine processing. We show how CE can be used to describe both ISR tasks (for example, detection, localization, or identication of particular kinds of object) and sensing assets (for example, acoustic, visual, or seismic sensors, mounted on motes or unmanned vehicles). We show how these representations enable an automatic sensor-task assignment process. Where a group of users are cooperating in a coalition, we show how CE task summaries give users in the eld a high-level picture of ISR coverage of an area of interest. This allows them to make ecient use of sensing resources by sharing tasks.
All-fiber tunable MMI fiber laser
NASA Astrophysics Data System (ADS)
Antonio-Lopez, J. E.; Castillo-Guzman, A.; May-Arrioja, D. A.; Selvas-Aguilar, R.; LiKamWa, P.
2009-05-01
We report on a novel tuning mechanism to fabricate an all-fiber tunable laser based on multimode interference (MMI) effects. It is well known that the wavelength response of MMI devices exhibits a linear dependence when the length of the multimode fiber (MMF) section. Therefore, tuning in the MMI filter is achieved using a ferrule (capillary tube of 127 μm diameter) filled with a liquid with a higher refractive index than that of the ferrule, which creates a variable liquid MMF. This liquid MMF is used to increase the effective length of the MMI filter and tuning takes place. Using this simple scheme, a tuning range of 30 nm was easily achieved, with very small insertion losses. The filter was tested within a typical Erbium doped fiber (EDF) ring laser cavity, and a tunable EDF laser covering the full C-band was demonstrated. The advantage of our laser is of course the simplicity of the tunable MMI filter, which results in an inexpensive tunable fiber laser.
NASA Astrophysics Data System (ADS)
Xing, Rui; Dong, Changbin; Wang, Zixiao; Wu, Yue; Yang, Yuguang; Jian, Shuisheng
2018-06-01
A novel, simultaneous strain and temperature sensor utilizing polarization maintaining fiber (PMF) and multimode fiber (MMF) is proposed and experimentally demonstrated in this paper. The sensing head of this sensor can be obtained by splicing PMF and MMF in the structure of PMF-MMF-PMF. The extinction ratio of the transmission spectrum can be over 30 dB. The strain sensitivities of sensor by two spectrum dips can be 1.01 pm/με and 1.27 pm/με in the range from 0 to 2000 με. Meanwhile, the temperature sensitivities of 49 pm/°C and 41 pm/°C can be achieved by two spectrum dips in the range from 30 °C to 70 °C. The sensitivity difference between the two spectrum dips can be used to realize dual parameters fiber sensing. This sensor exhibits the advantages of simple fabrication, compact structure and multi-purpose measuring. It may have the great potential in fields of robot arms and artificial limbs.
Prasad, Mandava; Hussain, Mohammed Z.; Shetty, Sharath K.; Kumar, T. Ashok; Khaur, Mohit; George, Suja A.; Dalwai, Sameen
2013-01-01
Objective: To measure the arch width and Median mandibular flexure (MMF) values at relative rest and maximum jaw opening in young adults with Dolichofacial, Mesofacial, and Brachyfacial types and tested whether the variation in the facial pattern is related to the MMF values in South Indian population. Materials and Methods: This Prospective clinical study consisted of sample of 60 young adults. The subjects were grouped into 3 groups: Group 1: Brachyfacial, Group 2: Mesofacial and types, Group 3: Dolichofacial. Impressions were taken for all the 60 subjects and the casts were scanned and digitized. The intermolar width was measured for Dolichofacial, Mesofacial, and Brachyfacial subjects at relative rest (R) and maximum opening (O). Results: The statistical analysis of the observations included Descriptive and Inferential statistics. The statistical analysis was executed by means of Sigma graph pad prism software, USA Version-4. Kruskal wallis (ANOVA) followed by Dunns post hoc test was performed. Mann Whitney U-test was performed to assess the difference in MMF values between Males and Females of the three groups. The Mean (SD) Mandibular flexure in individuals with Brachyfacial type was 1.12 (0.09), Mesofacial type was 0.69 (0.21), and Dolichofacial type was 0.39 (0.08). Conclusions: The Mean intermolar width was maximum in Brachyfacial type and minimum in Dolichofacial type. MMF was maximum at the maximum mouth opening position and was maximum in individuals with Brachyfacial type. PMID:24082745
Gasulla, I; Capmany, J
2006-10-02
We present a closed-form expression for the evaluation of the transfer function of a multimode fiber (MMF) link based on the electric field propagation model. After validating the result we investigate the potential for broadband transmission in regions far from baseband. We find that MMFs offer the potential for broadband ROF transmission in the microwave and millimetre wave regions in short and middle reach distances.
Albrecht, Maike; Henke, Julia; Tacke, Sabine; Markert, Michael; Guth, Brian
2014-12-31
This study evaluated the influence of repeated anaesthesia using isoflurane (ISO, 2-3 Vol%), ketamine-xylazine (KX, 100 mg·kg(-1) + 5 mg·kg(-1), i.m.) or a combination of medetomidine-midazolam-fentanyl (MMF, 0.15 mg·kg(-1) + 2.0 mg·kg(-1) + 0.005 mg·kg(-1), i.m.) on heart rate (HR), arterial blood pressure (BP), body temperature (BT), duration of anaesthetic intervals and body weight (BW) in Wistar rats. Rats were instrumented with a telemetric system for the measurement of systolic, diastolic and mean arterial pressure (SAP, DAP, MAP), pulse pressure (PP), HR and BT during induction, maintenance and recovery of anaesthesia. Each anaesthesia was performed six times within three weeks. KX was not antagonized, but ISO delivery was terminated 40 minutes after induction and MMF was reversed with atipamezole-flumazenil-naloxone (AFN, 0.75 mg·kg(-1) + 0.2 mg·kg(-1) + 0.12 mg·kg(-1), s.c.). With repeated anaesthesia, ISO showed a decrease of HR and BP. A significant decrease of PP could be observed with repeated anaesthesia using MMF. HR and BP were not affected by repeated KX anaesthesia, but we noted a reduction of sleeping time and BW. Neither MMF nor ISO showed significant differences in the duration of anaesthetic intervals and BW. With KX we observed tissue necrosis at the injection site and surgical tolerance was not achieved in 25% of the anaesthesias performed. HR, BP values, BT, duration of anaesthetic intervals and BW were affected differently by repeated anaesthesia performed with ISO, KX or MMF. ISO produced a reproducible anaesthesia, thereby being suitable for repeated use, but with a decrease of HR and BP throughout the six anaesthesias. The use of ISO in cases where these parameters should be unaffected is therefore not advised. The inability to produce a surgical tolerance, the reduction of sleeping time and BW, as well as the tissue necrosis are significant contraindications for a repeated use of KX. Only mild changes of BP were found with repeated MMF anaesthesia, so it seems suitable for serial use, unless the high BP and the low HR during the surgical plane of anaesthesia are undesirable for a special procedure.
NASA Astrophysics Data System (ADS)
Chern, J.; Tao, W.; Shen, B.
2011-12-01
The Madden-Julian oscillation (MJO) is the dominant component of intraseasonal variability in the tropic. It interacts and influences a wide range of weather and climate phenomena across different temporal and spatial scales. Despite the important role the MJO plays in the weather and climate system, past multi-model MJO intercomparison studies have shown that current global general circulation models (GCMs) still have considerable shortcomings in representing and forecasting this phenomenon. To improve representation of MJO and tropical convective cloud systems in global model, an Multiscale Modeling Framework (MMF) in which a cloud-resolving model takes the place of the sing-column cumulus parameterization used in convectional GCMs has been successfully developed at NAAS Goddard (Tao et al. 2009). To evaluate and improve the ability of this modeling system in representation and prediction of the MJO, several numerical hindcast experiments of a few selected MJO events during YOTC have been carried out. The ability of the model to simulate the MJO events is examined using diagnostic and skill metrics developed by the CLIVAR MJO Working Group Project as well as comparisons with a high-resolution global mesoscale model simulations, satellite observations, and analysis dataset. Several key variables associated with the MJO are investigated, including precipitation, outgoing longwave radiation, large-scale circulation, surface latent heat flux, low-level moisture convergence, vertical structure of moisture and hydrometers, and vertical diabatic heating profiles to gain insight of cloud processes associated with the MJO events.
Mamashli, Fahimeh; Khan, Sheraz; Bharadwaj, Hari; Michmizos, Konstantinos; Ganesan, Santosh; Garel, Keri-Lee A.; Hashmi, Javeria Ali; Herbert, Martha R.; Hämäläinen, Matti; Kenet, Tal
2017-01-01
Autism spectrum disorder (ASD) is associated with difficulty in processing speech in a noisy background, but the neural mechanisms that underlie this deficit have not been mapped. To address this question, we used magnetoencephalography to compare the cortical responses between ASD and typically developing (TD) individuals to a passive mismatch paradigm. We repeated the paradigm twice, once in a quiet background, and once in the presence of background noise. We focused on both the evoked mismatch field (MMF) response in temporal and frontal cortical locations, and functional connectivity with spectral specificity between those locations. In the quiet condition, we found common neural sources of the MMF response in both groups, in the right temporal gyrus and inferior frontal gyrus (IFG). In the noise condition, the MMF response in the right IFG was preserved in the TD group, but reduced relative to the quiet condition in ASD group. The MMF response in the right IFG also correlated with severity of ASD. Moreover, in noise, we found significantly reduced normalized coherence (deviant normalized by standard) in ASD relative to TD, in the beta band (14–25 Hz), between left temporal and left inferior frontal sub-regions. However, unnormalized coherence (coherence during deviant or standard) was significantly increased in ASD relative to TD, in multiple frequency bands. Our findings suggest increased recruitment of neural resources in ASD irrespective of the task difficulty, alongside a reduction in top-down modulations, usually mediated by the beta band, needed to mitigate the impact of noise on auditory processing. PMID:27910247
Tavallai, Mehrad; Booth, Laurence; Roberts, Jane L; McGuire, William P; Poklepovic, Andrew; Dent, Paul
2016-04-05
We determined whether the myelofibrosis drug ruxolitinib, an inhibitor of Janus kinases 1/2 (JAK1 and JAK2), could interact with the multiple sclerosis drug dimethyl-fumarate (DMF) to kill tumor cells; studies used the in vivo active form of the drug, mono-methyl fumarate (MMF). Ruxolitinib interacted with MMF to kill brain, breast, lung and ovarian cancer cells, and enhanced the lethality of standard of care therapies such as paclitaxel and temozolomide. MMF also interacted with other FDA approved drugs to kill tumor cells including Celebrex® and Gilenya®. The combination of [ruxolitinib + MMF] inactivated ERK1/2, AKT, STAT3 and STAT5; reduced expression of MCL-1, BCL-XL, SOD2 and TRX; increased BIM expression; decreased BAD S112 S136 phosphorylation; and enhanced pro-caspase 3 cleavage. Expression of activated forms of STAT3, MEK1 or AKT each significantly reduced drug combination lethality; prevented BAD S112 S136 dephosphorylation and decreased BIM expression; and preserved TRX, SOD2, MCL-1 and BCL-XL expression. The drug combination increased the levels of reactive oxygen species in cells, and over-expression of TRX or SOD2 prevented drug combination tumor cell killing. Over-expression of BCL-XL or knock down of BAX, BIM, BAD or apoptosis inducing factor (AIF) protected tumor cells. The drug combination increased AIF : HSP70 co-localization in the cytosol but this event did not prevent AIF : eIF3A association in the nucleus.
NASA Astrophysics Data System (ADS)
Miao, Yinping; Zhang, Hao; Lin, Jichao; Song, Binbin; Zhang, Kailiang; Lin, Wei; Liu, Bo; Yao, Jianquan
2015-03-01
A dual-parameter measurement scheme based on a long-period fiber grating (LPFG) concatenated with a multimode fiber (MMF) has been proposed and experimentally demonstrated for simultaneous measurement of magnetic field and temperature. Splicing the LPFG with the etched MMF enables the coupling between the core modes and different cladding modes of the LPFG as well as the interferences between higher-order modes in the MMF. Due to different transmission mechanisms of the LPFG and mode interference, the proposed sensor shows transmission dip wavelength sensitivities of 0.02878 nm/Oe and -0.04048 nm/°C for multi-mode interference (MMI) and -0.0024 nm/Oe and 0.03929 nm/°C for the LPFG, respectively. By monitoring the opposite behaviors of resonance wavelength shift corresponding to the LPFG and MMI, the magnetic field and environmental temperature can be simultaneously measured. The spectral characteristics of the proposed sensor that could be tuned through control of both environmental temperature and applied magnetic field, which would provide a promising candidate for dual-channel filtering applications as well as multi-parameter measurement applications.
MAGNETIC TOPOLOGY OF A NAKED SUNSPOT: IS IT REALLY NAKED?
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sainz Dalda, A.; Vargas Dominguez, S.; Tarbell, T. D.
The high spatial, temporal, and spectral resolution achieved by Hinode instruments gives much better understanding of the behavior of some elusive solar features, such as pores and naked sunspots. Their fast evolution and, in some cases, their small sizes have made their study difficult. The moving magnetic features (MMFs) have been studied during the last 40 years. They have been always associated with sunspots, especially with the penumbra. However, a recent observation of a naked sunspot (one with no penumbra) has shown MMF activity. The authors of this reported observation expressed their reservations about the explanation given to the bipolarmore » MMF activity as an extension of the penumbral filaments into the moat. How can this type of MMF exist when a penumbra does not? In this Letter, we study the full magnetic and (horizontal) velocity topology of the same naked sunspot, showing how the existence of a magnetic field topology similar to that observed in sunspots can explain these MMFs, even when the intensity map of the naked sunspot does not show a penumbra.« less
Watterson, Scott H; Chen, Ping; Zhao, Yufen; Gu, Henry H; Dhar, T G Murali; Xiao, Zili; Ballentine, Shelley K; Shen, Zhongqi; Fleener, Catherine A; Rouleau, Katherine A; Obermeier, Mary; Yang, Zheng; McIntyre, Kim W; Shuster, David J; Witmer, Mark; Dambach, Donna; Chao, Sam; Mathur, Arvind; Chen, Bang-Chi; Barrish, Joel C; Robl, Jeffrey A; Townsend, Robert; Iwanowicz, Edwin J
2007-07-26
Inosine monophosphate dehydrogenase (IMPDH), a key enzyme in the de novo synthesis of guanosine nucleotides, catalyzes the irreversible nicotinamide-adenine dinucleotide dependent oxidation of inosine-5'-monophosphate to xanthosine-5'-monophosphate. Mycophenolate Mofetil (MMF), a prodrug of mycophenolic acid, has clinical utility for the treatment of transplant rejection based on its inhibition of IMPDH. The overall clinical benefit of MMF is limited by what is generally believed to be compound-based, dose-limiting gastrointestinal (GI) toxicity that is related to its specific pharmacokinetic characteristics. Thus, development of an IMPDH inhibitor with a novel structure and a different pharmacokinetic profile may reduce the likelihood of GI toxicity and allow for increased efficacy. This article will detail the discovery and SAR leading to a novel and potent acridone-based IMPDH inhibitor 4m and its efficacy and GI tolerability when administered orally in a rat adjuvant arthritis model.
Secure communications of CAP-4 and OOK signals over MMF based on electro-optic chaos.
Ai, Jianzhou; Wang, Lulu; Wang, Jian
2017-09-15
Chaos-based secure communication can provide a high level of privacy in data transmission. Here, we experimentally demonstrate secure signal transmission over two kinds of multimode fiber (MMF) based on electro-optic intensity chaos. High-quality synchronization is achieved in an electro-optic feedback configuration. Both 5 Gbit/s carrier-less amplitude/phase (CAP-4) modulation and 10 Gbit/s on-off key (OOK) signals are recovered efficiently in electro-optic chaos-based communication systems. Degradations of chaos synchronization and communication system due to mismatch of various hardware keys are also discussed.
Central Diabetes Insipidus in Refractory Antineutrophil Cytoplasmic Antibody-associated Vasculitis
Ohashi, Keiji; Morishita, Michiko; Watanabe, Haruki; Sada, Ken-Ei; Katsuyama, Takayuki; Miyawaki, Yoshia; Katsuyama, Eri; Narazaki, Mariko; Tatebe, Noriko; Watanabe, Katsue; Kawabata, Tomoko; Wada, Jun
2017-01-01
We herein describe two cases of refractory antineutrophil cytoplasmic antibody-associated vasculitis (AAV) complicated with diabetes insipidus (DI) possibly related to hypertrophic pachymeningitis (HP). One patient had microscopic polyangiitis and HP, which were refractory to cyclophosphamide, azathioprine, rituximab, mycophenolate mofetil (MMF), and mizoribine. Remission was finally achieved with the use of etanercept, but DI occurred 5 years later. The other patient had granulomatosis with polyangiitis, which that was refractory to cyclophosphamide, methotrexate, MMF, and rituximab. DI subsequently developed, but was successfully treated with etanercept. Dura mater hypertrophy was macroscopically observed in the latter case. PMID:28943556
Central Diabetes Insipidus in Refractory Antineutrophil Cytoplasmic Antibody-associated Vasculitis.
Ohashi, Keiji; Morishita, Michiko; Watanabe, Haruki; Sada, Ken-Ei; Katsuyama, Takayuki; Miyawaki, Yoshia; Katsuyama, Eri; Narazaki, Mariko; Tatebe, Noriko; Watanabe, Katsue; Kawabata, Tomoko; Wada, Jun
2017-11-01
We herein describe two cases of refractory antineutrophil cytoplasmic antibody-associated vasculitis (AAV) complicated with diabetes insipidus (DI) possibly related to hypertrophic pachymeningitis (HP). One patient had microscopic polyangiitis and HP, which were refractory to cyclophosphamide, azathioprine, rituximab, mycophenolate mofetil (MMF), and mizoribine. Remission was finally achieved with the use of etanercept, but DI occurred 5 years later. The other patient had granulomatosis with polyangiitis, which that was refractory to cyclophosphamide, methotrexate, MMF, and rituximab. DI subsequently developed, but was successfully treated with etanercept. Dura mater hypertrophy was macroscopically observed in the latter case.
Han, Ming; Wang, Anbo
2006-05-01
Theoretical and experimental results have shown that mode power distribution (MPD) variations could significantly vary the phase of spectral fringes from multimode fiber extrinsic Fabry-Perot interferometric (MMF-EFPI) sensor systems, owing to the fact that different modes introduce different extra phase shifts resulting from the coupling of modes reflected at the second surface to the lead-in fiber end. This dependence of fringe pattern on MPD could cause measurement errors in signal demodulation methods of white-light MMF-EFPI sensors that implement the phase information of the fringes.
Oral ulcers produced by mycophenolate mofetil in two liver transplant patients.
Naranjo, J; Poniachik, J; Cisco, D; Contreras, J; Oksenberg, D; Valera, J M; Díaz, J C; Rojas, J; Cardemil, G; Mena, S; Castillo, J; Rencoret, G; Godoy, J; Escobar, J; Rodríguez, J; Leyton, P; Fica, A; Toledo, C
2007-04-01
Oral ulcers are a frequent problem in transplant medicine. It is important to consider infectious etiologies, exacerbated by the immunosuppressive treatment, but other etiologies are also possible, like adverse drug reactions. Mycophenolate mofetil (MMF) is an immunosuppressive medication that has been used in combination with calcineurin inhibitors and steroids. Reports of renal transplant patients with oral ulcers related to MMF have appeared lately and herein we have described 2 cases in liver transplant patients. Their oral ulcers resolved quickly after suspension of the medication. Our 2 cases in liver transplant patients represented a unique setting for this type of complication.
Kagaya, Hideaki; Miura, Masatomo; Saito, Mitsuru; Habuchi, Tomonori; Satoh, Shigeru
2010-08-01
The risk of acute rejection in patients with higher exposure to mycophenolic acid (MPA), the active metabolite of mycophenolate mofetil (MMF), might be due to inosine 5'-monophosphate dehydrogenase (IMPDH) polymorphisms. The correlations with subclinical acute rejection, IMPDH1 polymorphisms and MPA exposure on day 28 post-transplantation were investigated in 82 Japanese recipients. Renal transplant recipients were given combination immunosuppressive therapy consisting of tacrolimus and 1.0, 1.5 or 2.0 g/day of MMF in equally divided doses every 12 hr at designated times. There were no significant differences in the incidence of subclinical acute rejection between IMPDH1 rs2278293 or rs2278294 polymorphisms (p = 0.243 and 0.735, respectively). However, in the high MPA night-time exposure range (AUC > 60 microg x h/ml and C(0 )> or = 1.9 microg/ml), there was a significant difference in the incidence of subclinical acute rejection between IMPDH1 rs2278293 A/A, A/G and G/G genotypes (each p = 0.019), but not the IMPDH1 rs2278294 genotype. In the higher daytime MPA exposure range, patients with the IMPDH1 rs2278293 G/G genotype also tended to develop subclinical acute rejection. In patients with the IMPDH rs2278293 A/A genotype, the risk of subclinical acute rejection episode tends to be low and the administration of MMF was effective. The risk of subclinical acute rejection for recipients who cannot adapt in therapeutic drug monitoring (TDM) of MPA seems to be influenced by IMPDH1 rs2278293 polymorphism. The prospective analysis of IMPDH1 rs2278293 polymorphism as well as monitoring of MPA plasma concentration after transplantation might help to improve MMF therapy.
Groetzner, Jan; Kaczmarek, Ingo; Schirmer, Johannes; Uberfuhr, Peter; Gulbins, Helmut; Daebritz, Sabine; Meiser, Bruno; Reichart, Bruno
2008-01-01
Chronic renal failure (CRF) is a common complication of calcineurin inhibitor (CNI)-based immunosuppression following cardiac transplantation (HTx). The aim of this prospective study was to evaluate the impact of an immunosuppressive conversion from CNIs to mycophenolate mofetil (MMF) and steroids in cardiac transplant recipients with CRF on renal and cardiac graft function. Since 1999, 12 HTx recipients (10 men; 58 +/- 3.6 yr of age; 8.7 +/- 4.2 yr after HTx) with CNI-based immunosuppression and a calculated creatinine clearance (CreaCl) <50 mL/min were included. Most patients (10/12) were on cyclosporine and two patients were on tacrolimus prior inclusion. MMF was started with 0.5 g/d and adjusted according to the target trough levels (2-4 ng/mL). Prednisone dosage was 0.4 mg/kg. Subsequently, CNIs were completely withdrawn. Acute rejection episodes were excluded one and three months after conversion by endomyocardial biopsy and by echocardiography every three months thereafter. After a mean follow-up of 20 +/- 16 months, CreaCl improved significantly: pre-conversion vs. post-conversion: 32.8 +/- 12.2 mg/dL vs. 42.8 +/- 21.14 mg/dL, p = 0.03. However, four acute rejection episodes occurred and patients were reconverted to CNIs. Additionally, six patients had a new onset of graft vessel disease (GVD) one yr after conversion. As a result of these adverse events, the study was stopped after inclusion of only 12 of the scheduled 30 patients. Conversion to MMF and steroids after HTx improves renal function, but increases the risk for recurrent rejection and GVD. Therefore, MMF and steroids should only be considered in patients with a markedly low risk for rejection.
Bashir, Al; Hassan, A Abu; Salmah, M R Che; Rahman, W A
2008-03-01
The efficacy of the larvicidal and pupicidal agent (Agnique) MMF was evaluated against larvae of An. arabiensis and Culex (Diptera: Culicidae) under field conditions in Bahary Locality, Khartoum, Sudan. At an applied dosage of 0.25 ml/m2, MMF resulted in 89.4, 79.8 and 88.2% reductions in L3-L4 instars An. arabiensis and 63.5% in Culex larvae (all stages) 24 to 72 hours post-treatment. Pupae were completely eliminated (100%) within 24 hours posttreatment. The earlier instars (L1-L2) of An. arabiensis were more tolerant with a 62.5% reduction at 72 hours post-treatment compared to (L3-L4) instars and pupae. At 7-days post-treatment Agnique gave a 57.5% reduction in L1-L2 and 92.6% in L3-L4 instar larvae of An. arabiensis and 57.3% and 86.4% in Culex larvae and pupae, respectively. We conclude that Agnique can perform effectively against L3-L4 instars and pupae of An. arabiensis for only 1 week, and 3 to 4 days against L1-L2 instars of Culex spp.
Microphysics in the Multi-Scale Modeling Systems with Unified Physics
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo; Chern, J.; Lamg, S.; Matsui, T.; Shen, B.; Zeng, X.; Shi, R.
2011-01-01
In recent years, exponentially increasing computer power has extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 km2 in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (l) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, the microphysics developments of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the heavy precipitation processes will be presented.
The impact of mesoscale convective systems on global precipitation: A modeling study
NASA Astrophysics Data System (ADS)
Tao, Wei-Kuo
2017-04-01
The importance of precipitating mesoscale convective systems (MCSs) has been quantified from TRMM precipitation radar and microwave imager retrievals. MCSs generate more than 50% of the rainfall in most tropical regions. Typical MCSs have horizontal scales of a few hundred kilometers (km); therefore, a large domain and high resolution are required for realistic simulations of MCSs in cloud-resolving models (CRMs). Almost all traditional global and climate models do not have adequate parameterizations to represent MCSs. Typical multi-scale modeling frameworks (MMFs) with 32 CRM grid points and 4 km grid spacing also might not have sufficient resolution and domain size for realistically simulating MCSs. In this study, the impact of MCSs on precipitation processes is examined by conducting numerical model simulations using the Goddard Cumulus Ensemble model (GCE) and Goddard MMF (GMMF). The results indicate that both models can realistically simulate MCSs with more grid points (i.e., 128 and 256) and higher resolutions (1 or 2 km) compared to those simulations with less grid points (i.e., 32 and 64) and low resolution (4 km). The modeling results also show that the strengths of the Hadley circulations, mean zonal and regional vertical velocities, surface evaporation, and amount of surface rainfall are either weaker or reduced in the GMMF when using more CRM grid points and higher CRM resolution. In addition, the results indicate that large-scale surface evaporation and wind feed back are key processes for determining the surface rainfall amount in the GMMF. A sensitivity test with reduced sea surface temperatures (SSTs) is conducted and results in both reduced surface rainfall and evaporation.
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo; Chern, Jiun-Dar
2017-01-01
The importance of precipitating mesoscale convective systems (MCSs) has been quantified from TRMM precipitation radar and microwave imager retrievals. MCSs generate more than 50% of the rainfall in most tropical regions. MCSs usually have horizontal scales of a few hundred kilometers (km); therefore, a large domain with several hundred km is required for realistic simulations of MCSs in cloud-resolving models (CRMs). Almost all traditional global and climate models do not have adequate parameterizations to represent MCSs. Typical multi-scale modeling frameworks (MMFs) may also lack the resolution (4 km grid spacing) and domain size (128 km) to realistically simulate MCSs. In this study, the impact of MCSs on precipitation is examined by conducting model simulations using the Goddard Cumulus Ensemble (GCE) model and Goddard MMF (GMMF). The results indicate that both models can realistically simulate MCSs with more grid points (i.e., 128 and 256) and higher resolutions (1 or 2 km) compared to those simulations with fewer grid points (i.e., 32 and 64) and low resolution (4 km). The modeling results also show the strengths of the Hadley circulations, mean zonal and regional vertical velocities, surface evaporation, and amount of surface rainfall are weaker or reduced in the GMMF when using more CRM grid points and higher CRM resolution. In addition, the results indicate that large-scale surface evaporation and wind feed back are key processes for determining the surface rainfall amount in the GMMF. A sensitivity test with reduced sea surface temperatures shows both reduced surface rainfall and evaporation.
NASA Astrophysics Data System (ADS)
Panicker, Rahul Alex
Multimode fibers (MMF) are widely deployed in local-, campus-, and storage-area-networks. Achievable data rates and transmission distances are, however, limited by the phenomenon of modal dispersion. We propose a system to compensate for modal dispersion using adaptive optics. This leads to a 10- to 100-fold improvement in performance over current standards. We propose a provably optimal technique for minimizing inter-symbol interference (ISI) in MMF systems using adaptive optics via convex optimization. We use a spatial light modulator (SLM) to shape the spatial profile of light launched into an MMF. We derive an expression for the system impulse response in terms of the SLM reflectance and the field patterns of the MMF principal modes. Finding optimal SLM settings to minimize ISI, subject to physical constraints, is posed as an optimization problem. We observe that our problem can be cast as a second-order cone program, which is a convex optimization problem. Its global solution can, therefore, be found with minimal computational complexity. Simulations show that this technique opens up an eye pattern originally closed due to ISI. We then propose fast, low-complexity adaptive algorithms for optimizing the SLM settings. We show that some of these converge to the global optimum in the absence of noise. We also propose modified versions of these algorithms to improve resilience to noise and speed of convergence. Next, we experimentally compare the proposed adaptive algorithms in 50-mum graded-index (GRIN) MMFs using a liquid-crystal SLM. We show that continuous-phase sequential coordinate ascent (CPSCA) gives better bit-error-ratio performance than 2- or 4-phase sequential coordinate ascent, in concordance with simulations. We evaluate the bandwidth characteristics of CPSCA, and show that a single SLM is able to simultaneously compensate over up to 9 wavelength-division-multiplexed (WDM) 10-Gb/s channels, spaced by 50 GHz, over a total bandwidth of 450 GHz. We also show that CPSCA is able to compensate for modal dispersion over up to 2.2 km, even in the presence of mid-span connector offsets up to 4 mum (simulated in experiment by offset splices). A known non-adaptive launching technique using a fusion-spliced single-mode-to-multimode patchcord is shown to fail under these conditions. Finally, we demonstrate 10 x 10 Gb/s dense WDM transmission over 2.2 km of 50-mum GRIN MMF. We combine transmitter-based adaptive optics and receiver-based single-mode filtering, and control the launched field pattern for ten 10-Gb/s non-return-to-zero channels, wavelength-division multiplexed on a 200-GHz grid in the C band. We achieve error-free transmission through 2.2 km of 50-mum GRIN MMF for launch offsets up to 10 mum and for worst-case launched polarization. We employ a ten-channel transceiver based on parallel integration of electronics and photonics.
Li, Changbin; Qi, Jiaguo; Feng, Zhaodong; Yin, Runsheng; Guo, Biyun; Zhang, Feng; Zou, Songbing
2010-03-01
Land degradation due to erosion is one of the most serious environmental problems in China. To reduce land degradation, the government has taken a number of conservation and restoration measures, including the Sloping Land Conversion Program (SLCP), which was launched in 1999. A logical question is whether these measures have reduced soil erosion at the regional level. The objective of this article is to answer this question by assessing soil erosion dynamics in the Zuli River basin in the Loess Plateau of China from 1999 to 2006. The MMF (Morgan, Morgan and Finney) model was used to simulate changes in runoff and soil erosion over the period of time during which ecological restoration projects were implemented. Some model variables were derived from remotely sensed images to provide improved land surface representation. With an overall accuracy rate of 0.67, our simulations show that increased ground vegetation cover, especially in forestlands and grasslands, has reduced soil erosion by 38.8% on average from 1999 to 2006. During the same time period, however, the change in rainfall pattern has caused a 13.1% +/- 4.3% increase in soil erosion, resulting in a net 25.7% +/- 8.5% reduction in soil erosion. This suggests that China's various ecological restoration efforts have been effective in reducing soil loss.
A comparative study on methods of improving SCR for ship detection in SAR image
NASA Astrophysics Data System (ADS)
Lang, Haitao; Shi, Hongji; Tao, Yunhong; Ma, Li
2017-10-01
Knowledge about ship positions plays a critical role in a wide range of maritime applications. To improve the performance of ship detector in SAR image, an effective strategy is improving the signal-to-clutter ratio (SCR) before conducting detection. In this paper, we present a comparative study on methods of improving SCR, including power-law scaling (PLS), max-mean and max-median filter (MMF1 and MMF2), method of wavelet transform (TWT), traditional SPAN detector, reflection symmetric metric (RSM), scattering mechanism metric (SMM). The ability of SCR improvement to SAR image and ship detection performance associated with cell- averaging CFAR (CA-CFAR) of different methods are evaluated on two real SAR data.
Herrick, Ariane L; Pan, Xiaoyan; Peytrignet, Sébastien; Lunt, Mark; Hesselstrand, Roger; Mouthon, Luc; Silman, Alan; Brown, Edith; Czirják, László; Distler, Jörg H W; Distler, Oliver; Fligelstone, Kim; Gregory, William J; Ochiel, Rachel; Vonk, Madelon; Ancuţa, Codrina; Ong, Voon H; Farge, Dominique; Hudson, Marie; Matucci-Cerinic, Marco; Balbir-Gurman, Alexandra; Midtvedt, Øyvind; Jordan, Alison C; Jobanputra, Paresh; Stevens, Wendy; Moinzadeh, Pia; Hall, Frances C; Agard, Christian; Anderson, Marina E; Diot, Elisabeth; Madhok, Rajan; Akil, Mohammed; Buch, Maya H; Chung, Lorinda; Damjanov, Nemanja; Gunawardena, Harsha; Lanyon, Peter; Ahmad, Yasmeen; Chakravarty, Kuntal; Jacobsen, Søren; MacGregor, Alexander J; McHugh, Neil; Müller-Ladner, Ulf; Riemekasten, Gabriela; Becker, Michael; Roddy, Janet; Carreira, Patricia E; Fauchais, Anne Laure; Hachulla, Eric; Hamilton, Jennifer; İnanç, Murat; McLaren, John S; van Laar, Jacob M; Pathare, Sanjay; Proudman, Susannah; Rudin, Anna; Sahhar, Joanne; Coppere, Brigitte; Serratrice, Christine; Sheeran, Tom; Veale, Douglas J; Grange, Claire; Trad, Georges-Selim; Denton, Christopher P
2017-01-01
Objectives The rarity of early diffuse cutaneous systemic sclerosis (dcSSc) makes randomised controlled trials very difficult. We aimed to use an observational approach to compare effectiveness of currently used treatment approaches. Methods This was a prospective, observational cohort study of early dcSSc (within three years of onset of skin thickening). Clinicians selected one of four protocols for each patient: methotrexate, mycophenolate mofetil (MMF), cyclophosphamide or ‘no immunosuppressant’. Patients were assessed three-monthly for up to 24 months. The primary outcome was the change in modified Rodnan skin score (mRSS). Confounding by indication at baseline was accounted for using inverse probability of treatment (IPT) weights. As a secondary outcome, an IPT-weighted Cox model was used to test for differences in survival. Results Of 326 patients recruited from 50 centres, 65 were prescribed methotrexate, 118 MMF, 87 cyclophosphamide and 56 no immunosuppressant. 276 (84.7%) patients completed 12 and 234 (71.7%) 24 months follow-up (or reached last visit date). There were statistically significant reductions in mRSS at 12 months in all groups: −4.0 (−5.2 to −2.7) units for methotrexate, −4.1 (−5.3 to −2.9) for MMF, −3.3 (−4.9 to −1.7) for cyclophosphamide and −2.2 (−4.0 to −0.3) for no immunosuppressant (p value for between-group differences=0.346). There were no statistically significant differences in survival between protocols before (p=0.389) or after weighting (p=0.440), but survival was poorest in the no immunosuppressant group (84.0%) at 24 months. Conclusions These findings may support using immunosuppressants for early dcSSc but suggest that overall benefit is modest over 12 months and that better treatments are needed. Trial registration number NCT02339441. PMID:28188239
Determination of Aseismic Creep or Strain Field on the Main Marmara Fault
NASA Astrophysics Data System (ADS)
Özbey, V.; Yavasoglu, H.; Masson, F.; Klein, E.; Alkan, M. N.; Alkan, R. M.
2016-12-01
Plate motion affecting the Earth's crust have occurred for millions of years. Determination of strain accumulation based on the plate motion is commonly monitored with GPS in recent years. The North Anatolian Fault (NAF) Zone, which is one of the fastest faults in the world, extends along all North Anatolia from Bingöl to Saros Gulf. Several destructive earthquakes occurred there, such as Izmit (in 1999, Mw=7.4) and Duzce (in 1999, Mw=7.2) in last century. The NAFZ is dividing into southern and northern branches to the east of Marmara region and the Northern branch (Main Marmara Fault-MMF) is crossing the Marmara Sea, starting in from the Gulf of Izmit - Adapazarı and reaching the Gulf of Saros. According to recent studies, the MMF is the largest unbroken part of the fault and is divided into segments (among which the Central Marmara-CM and Prince's Island-PI segments). The determination of the deformation accumulated on the MMF has become extremely important especially after the 1999 Izmit earthquake. Recent studies have demonstrated that the Prince's Island segment is fully locked. However, studies that are focused on the Central Marmara segment, that is located offshore Istanbul, a giant metropole that has more than 14 million population, do not conclude about the presence of a seismic gap, capable of generating a big earthquake. Therefore, in the scope of this study, a new GPS network will be established at short and long distance from the Main Marmara Fault, to densify the existing GPS network. several campaign measurements will be necessary to compute a velocity field. The velocity field will reveal the compression and variations of accumulation rate on the fault. Also, the amount of aseismic creep deep within the fault will be determined using Elastic Displacement Modeling method, allowing to conclude about the existence of a seismic gap on the Main Marmara Fault originated from aseismic deformation or not.
Dimethyl fumarate modulation of immune and antioxidant responses: application to HIV therapy
Gill, Alexander J.; Kolson, Dennis L.
2013-01-01
The persistence of chronic immune activation and oxidative stress in human immunodeficiency virus (HIV)-infected, antiretroviral drug-treated individuals are major obstacles to fully preventing HIV disease progression. The immune modulator and antioxidant dimethyl fumarate (DMF) is effective in treating immune-mediated diseases and it also has potential applications to limiting HIV disease progression. Among the relevant effects of DMF and its active metabolite monomethyl fumarate (MMF) are induction of a Th1 → Th2 lymphocyte shift, inhibition of pro-inflammatory cytokine signaling, inhibition of NF-κB nuclear translocation, inhibition of dendritic cell maturation, suppression of lymphocyte and endothelial cell adhesion molecule expression, and induction of the Nrf2-dependent antioxidant response element (ARE) and effector genes. Associated with these effects are reduced lymphocyte and monocyte infiltration into psoriatic skin lesions in humans and immune-mediated demyelinating brain lesions in rodents, which confirms potent systemic and central nervous system (CNS) effects. In addition, DMF and MMF limit HIV infection in macrophages in vitro, albeit by unknown mechanisms. Finally, DMF and MMF also suppress neurotoxin production from HIV-infected macrophages, which drives CNS neurodegeneration. Thus, DMF might protect against systemic and CNS complications in HIV infection through its effective suppression of immune activation, oxidative stress, HIV replication, and macrophage-associated neuronal injury. PMID:23971529
Shang, Wenjun; Dong, Laidong; Feng, Guiwen; Wang, Yue; Pang, Xinlu; Li, Jinfeng; Liu, Lei; Zhang, Weihong
2013-08-01
To determine whether a new desensitization protocol (mycophenolate mofetil [MMF], plasmapheresis and antithymocyte globulin [ATG], complemented with human leucocyte antigen [HLA] amino acid residue matching) could reduce panel-reactive antibody (PRA) levels in sensitized patients, to facilitate successful renal transplantation. Patients awaiting transplantation with PRA levels >10% received treatment with MMF; those with PRA levels >30% were also treated with plasmapheresis. Patients whose PRA level was <20% after desensitization were eligible for transplantation. When a donor became available, traditional HLA matching and HLA amino acid residue matching were performed. All patients received ATG induction therapy postoperatively. Thirty-two sensitized patients were enrolled. Desensitization produced a significant decrease in PRA levels; 27 patients (84.4%) became eligible for transplantation and 26 (81.2%) subsequently underwent successful transplantation. Residue matching improved the proportion with a mismatch number of 0-1 from 7.7% to 65.4%, compared with traditional HLA matching. Postoperatively, all patients showed immediate graft function. Acute rejection occurred in three patients (11.5%) and infections in seven patients (25.9%); all were treated successfully. The combination of a desensitization protocol (MMF, plasmapheresis and ATG) and residue matching appears to be an effective strategy for sensitized patients awaiting renal transplantation.
Wemakor, Anthony; Iddrisu, Habib
2018-06-25
Maternal depression may affect child feeding practice which is an important determinant of child nutritional status. The objective of this study was to explore the association between maternal depression and WHO complementary feeding indicators [minimum dietary diversity (MDD), minimum meal frequency (MMF) and minimum acceptable diet (MAD)] or stunting status of children (6-23 months) in Tamale Metropolis, Ghana. A community-based cross-sectional study was carried out involving 200 mother-child pairs randomly sampled from three communities in Tamale Metropolis, Ghana. The prevalence of MDD, MMF, and MAD were 56.5, 65.0, and 44.0% respectively and 41.0% of the children sampled were stunted. A third of the mothers (33.5%) screened positive for depression. Maternal depression did not influence significantly MDD (p = 0.245), MMF (p = 0.442), and MAD (p = 0.885) or children's risk of stunting (p = 0.872). In conclusion maternal depression and child stunting are prevalent in Northern Ghana but there is a lack of evidence of an association between maternal depression and child feeding practices or nutritional status in this study population. Further research is needed to assess the effect of maternal depression on feeding practices and growth of young children.
Opportunities to Enhance Multimode Fiber Links by Application of Overfilled Launch
NASA Astrophysics Data System (ADS)
Onlagic, Denis
2005-11-01
This paper investigates possibilities for the practical design of high-performance multimode fibers (MMFs) that can provide bandwidths in excess of 10 GHz ...km in an overfilled regime of operation. Analysis of standard MMF in an overfilled launch demonstrates that the theoretical bandwidth limitations arise from the influence of cladding on the propagation of the highest order modes. Practical MMF profile designs that overcome this problem are investigated. The standard 50-and 62.5- μm fiber profiles are redesigned first to allow for the performance in an overfilled launch with the differential mode delays (DMDs) below 0.055 and 0.250 ns/km, respectively. It is shown that such fibers can exhibit the same or better theoretical bandwidth in an overfilled launch when compared to standard fiber under restricted launch. Elimination of the need for the restricted mode launch in high-performance multimode transmission systems can improve reliability issues and can relax the range of tolerance requirements imposed on terminal equipment, optical components, and link installation. Furthermore, MMFs that can be operated in an overfilled launched are compatible with emerging vertical cavity surface emitting laser (VCSEL) wavelength division multiplexing (WDM) array technologies. A successfully controlled higher order mode DMD also allows for the reduction of MMF core size and mit Delta that can be beneficial for low-cost high-performance single-channel links. It is demonstrated that properly designed reduced core fibers can achieve theoretical DMDs in the range of 0.005-0.02 ns/km. The bend loss properties of redesigned fibers are investigated in detail, showing that the proposed modifications do not lead to significant degradation of bend loss performance. Moreover, they can be manufactured at considerably lower cost while utilizing commercially readily available low-cost VCSELs. Even where the theoretical limit is not achieved by practical fiber making, the reduced core size and mit Delta MMF can provide higher production yield, lower cost, and higher average bandwidth.
Changes in plantar loading based on shoe type and sex during a jump-landing task.
Debiasio, Justin C; Russell, Mary E; Butler, Robert J; Nunley, James A; Queen, Robin M
2013-01-01
Metatarsal stress fractures are common in cleated-sport athletes. Previous authors have shown that plantar loading varies with footwear, sex, and the athletic task. To examine the effects of shoe type and sex on plantar loading in the medial midfoot (MMF), lateral midfoot (LMF), medial forefoot (MFF), middle forefoot (MidFF), and lateral forefoot (LFF) during a jump-landing task. Crossover study. Laboratory. Twenty-seven recreational athletes (14 men, 13 women) with no history of lower extremity injury in the last 6 months and no history of foot or ankle surgery. The athletes completed 7 jumping trials while wearing bladed-cleat, turf-cleat, and running shoes. Maximum force, contact area, contact time, and the force-time integral were analyzed in each foot region. We calculated 2 × 3 analyses of variance (α = .05) to identify shoe-condition and sex differences. We found no shoe × sex interactions, but the MMF, LMF, MFF, and LFF force-time integrals were greater in men (P < .03). The MMF maximum force was less with the bladed-cleat shoes (P = .02). Total foot and MidFF maximum force was less with the running shoes (P < .01). The MFF and LFF maximum forces were different among all shoe conditions (P < .01). Total foot contact area was less in the bladed-cleat shoes (P = .01). The MMF contact area was greatest in the running shoes (P < .01). The LFF contact area was less in the running shoes (P = .03). The MFF and LFF force-time integrals were greater with the bladed-cleat shoes (P < .01). The MidFF force-time integral was less in the running shoes (P < .01). Independent of shoe, men and women loaded the foot differently during a jump landing. The bladed cleat increased forefoot loading, which may increase the risk for forefoot injury. The type of shoe should be considered when choosing footwear for athletes returning to activity after metatarsal stress fractures.
Promsote, Wanwisa; Makala, Levi; Li, Biaoru; Smith, Sylvia B.; Singh, Nagendra; Ganapathy, Vadivel; Pace, Betty S.; Martin, Pamela M.
2014-01-01
Purpose. Sickle retinopathy (SR) is a major cause of vision loss in sickle cell disease (SCD). There are no strategies to prevent SR and treatments are extremely limited. The present study evaluated (1) the retinal pigment epithelial (RPE) cell as a hemoglobin producer and novel cellular target for fetal hemoglobin (HbF) induction, and (2) monomethylfumarate (MMF) as an HbF-inducing therapy and abrogator of oxidative stress and inflammation in SCD retina. Methods. Human globin gene expression was evaluated by RT–quantitative (q)PCR in the human RPE cell line ARPE-19 and in primary RPE cells isolated from Townes humanized SCD mice. γ-Globin promoter activity was monitored in KU812 stable dual luciferase reporter expressing cells treated with 0 to 1000 μM dimethylfumarate, MMF, or hydroxyurea (HU; positive control) by dual luciferase assay. Reverse transcriptase–qPCR, fluorescence-activated cell sorting (FACS), immunofluorescence, and Western blot techniques were used to evaluate γ-globin expression and HbF production in primary human erythroid progenitors, ARPE-19, and normal hemoglobin producing (HbAA) and homozygous βs mutation (HbSS) RPE that were treated similarly, and in MMF-injected (1000 μM) HbAA and HbSS retinas. Dihydroethidium labeling and nuclear factor (erythroid-derived 2)-like 2 (Nrf2), IL-1β, and VEGF expression were also analyzed. Results. Retinal pigment epithelial cells express globin genes and synthesize adult and fetal hemoglobin MMF stimulated γ-globin expression and HbF production in cultured RPE and erythroid cells, and in HbSS mouse retina where it also reduced oxidative stress and inflammation. Conclusions. The production of hemoglobin by RPE suggests the potential involvement of this cell type in the etiology of SR. Monomethylfumarate influences multiple parameters consistent with improved retinal health in SCD and may therefore be of therapeutic potential in SR treatment. PMID:24825111
Mino, Yasuaki; Naito, Takafumi; Shimoyama, Kumiko; Ogawa, Noriyoshi; Kawakami, Junichi
2017-07-01
Background Mycophenolate mofetil has recently been reported to be effective against systemic lupus erythematosus. The influence of the pharmacokinetics of mycophenolic acid, the active form of mycophenolate mofetil and the major inactive mycophenolic acid phenolic glucuronide on the activity of the target enzyme inosine 5'-monophosphate dehydrogenase, is expected to be revealed. The aim of this study was to identify the factors associated with inosine 5'-monophosphate dehydrogenase activity in systemic lupus erythematosus patients. Methods Fifty systemic lupus erythematosus patients in remission maintenance phase (29 received mycophenolate mofetil [MMF+] and 21 did not [MMF-]) were enrolled. Median and interquartile range of dose of mycophenolate mofetil were 1500 and 1000-1500 mg/day, respectively. Stepwise multiple linear regression analysis was performed to assess the dependence between inosine 5'-monophosphate dehydrogenase activity and 25 predictor values including predose plasma concentrations of free mycophenolic acid and mycophenolic acid phenolic glucuronide. Results Median and interquartile range of predose total plasma concentrations of mycophenolic acid and mycophenolic acid phenolic glucuronide were 2.73 and 1.43-5.73 and 25.5 and 13.1-54.7 µg/mL, respectively. Predose inosine 5'-monophosphate dehydrogenase activity was significantly higher in MMF+ than MMF- patients (median 38.3 and 20.6 nmoL xanthosine 5'-monophosphate/g haemoglobin/h, P<0.01). The plasma concentration of free mycophenolic acid phenolic glucuronide, complement fraction C3 and body weight were significant predictors accounting for interindividual variability in the inosine 5'-monophosphate dehydrogenase activity (adjusted R 2 = 0.52, P < 0.01) in a multivariate analysis. Conclusions Predose inosine 5'-monophosphate dehydrogenase activity was higher in systemic lupus erythematosus patients receiving mycophenolate mofetil therapy. Inosine 5'-monophosphate dehydrogenase activity may be determined by mycophenolic acid exposure and complement fraction C3 in systemic lupus erythematosus patients.
Cytomegalovirus disease in renal transplant recipients: a single-center experience.
Bhadauria, Dharmendra; Sharma, R K; Kaul, A; Prasad, Narayan; Gupta, Amit; Gupta, Anurag; Srivastava, Aneesh
2012-09-01
Cytomegalovirus (CMV) is the most common viral infection following kidney transplant, has been recognized as a major factor for graft loss and increased incidence of acute rejection. Different studies have reported a variable incidence of CMV disease with the use of Mycophenolate mofetil (MMF). We retrospectively analyzed our renal transplant recipients to review the results of CMV disease and to compare CMV disease in patient on Azathioprine and MMF for this purpose we retrospectively reviewed 521 live related kidney transplant recipients at our institute. 74 (14.2 %) live related allograft recipients developed CMV disease after a median interval of 7.18 ± 4.35 months from transplantation. The mean age was 36.15 ± 10.7 years. 63 of the patients were male. Malaise, fever and diarrhea were among most common symptoms. 20 (27.02 %) of the 74 recipients developed transaminitis, 13 (17.2 %) developed CMV gastritis, 5 (9.13 %) recipients developed pneumonia, and 3 (4.05 %) patient developed colitis. 59 (80 %) patients had leucopenia and 41 (56.5 %) developed thrombocytopenia. Mean serum creatinine level was 1.5 ± 0.4 (0.9-2.4) mg/dl before the disease, 1.9 ± 0.6 (1.3-3.6) mg/dl at the time of the diagnosis, and 1.7 ± 0.06 (0.8-4.2) mg/dl at the end of the treatment. CMV disease developed in 9 (36 %) of recipients who received basiliximab as induction therapy and 13 (30.24 %) of recipients who received ATG (p > 0.05). The incidence of CMV disease was similar in cyclosporine based regimen (13.2 %) and Tacrolimus based regimen 27 (16.16 %) (p = 0.137) and was also similar in Azathioprine 41 (9.5 %) and MMF group 33 (14.3 %) (p = 0.163). There was no significant difference in severity of CMV disease in both groups, except a higher incidence of leucopenia in Azathioprine group (86 vs. 74 %, p < 0.05) as compared to MMF group. 51 (68.91 %) patient developed graft dysfunction during CMV disease. In conclusion we report a low incidence (14.2 %) and milder form of cytomegalovirus disease at our center. Use of universal cytomegalovirus prophylaxis was associated with a low incidence and milder form of the disease. Incidence of CMV disease was similar between Azathioprine and MMF groups.
Do You Love Me? Psychological Characteristics of Romance Scam Victims
2018-01-01
Abstract The online dating romance scam is an Advance Fee Fraud, typically conducted by international criminal groups via online dating sites and social networking sites. This type of mass-marketing fraud (MMF) is the most frequently reported type of MMF in most Western countries. This study examined the psychological characteristics of romance scam victims by comparing romance scam victims with those who had never been scammed by MMFs. Romance scam victims tend to be middle-aged, well-educated women. Moreover, they tend to be more impulsive (scoring high on urgency and sensation seeking), less kind, more trustworthy, and have an addictive disposition. It is argued here that these findings might be useful for those developing prevention programs and awareness campaigns. PMID:28657792
Uncladded sensing fiber for refractive index measurement
NASA Astrophysics Data System (ADS)
Bhardwaj, V.; Gangwar, R. K.; Pathak, A. K.; Singh, V. K.
2016-05-01
The formation of chemically etched optical fiber for use in refractive index sensor is addressed. This presented design of a refractive index (RI) sensor is based on recording the power loss exhibited by radiation propagating through an etched multimode fiber (MMF) immersed in the liquid under study. The decreasing diameters of fibers are found to be strongly dependent on the temperature and etchant composition. This experiment was performed for different unclad etched fibers for same sensing length and the RI changes from 1.33 RIU to 1.38 RIU. When the multimode fiber (MMF) is etched for 12 hours the sensitivity of the sensor is approximately 204.25dBm/RIU, which is larger than without etched fiber having sensitivity 127.2dBm/RIU.
Pediatric mandibular fractures treated by rigid internal fixation.
Wong, G B
1993-09-01
Mandibular fractures in the pediatric patient population are relatively uncommon. These patients present with their own unique treatment requirements. Most fractures have been treated conservatively by dental splints. Closed reduction techniques with maxillomandibular fixation (MMF) in very young children can pose several concerns, including cooperation, compliance and adequate nutritional intake. Rigid internal fixation of unstable mandibular fractures using miniplates and screws circumvents the need for MMF and allows immediate jaw mobilization. At major pediatric trauma institutions, there has been an increasing trend toward the use of this treatment when open reduction is necessary. This article presents a report of a five-year-old child who presented with bilateral mandibular fractures and was treated by rigid internal fixation and immediate mandibular mobilization.
Do You Love Me? Psychological Characteristics of Romance Scam Victims.
Whitty, Monica T
2018-02-01
The online dating romance scam is an Advance Fee Fraud, typically conducted by international criminal groups via online dating sites and social networking sites. This type of mass-marketing fraud (MMF) is the most frequently reported type of MMF in most Western countries. This study examined the psychological characteristics of romance scam victims by comparing romance scam victims with those who had never been scammed by MMFs. Romance scam victims tend to be middle-aged, well-educated women. Moreover, they tend to be more impulsive (scoring high on urgency and sensation seeking), less kind, more trustworthy, and have an addictive disposition. It is argued here that these findings might be useful for those developing prevention programs and awareness campaigns.
Lei, Yi; Li, Jianqiang; Wu, Rui; Fan, Yuting; Fu, Songnian; Yin, Feifei; Dai, Yitang; Xu, Kun
2017-06-01
Based on the observed random fluctuation phenomenon of speckle pattern across multimode fiber (MMF) facet and received optical power distribution across three output ports, we experimentally investigate the statistic characteristics of a 3×3 radio frequency multiple-input multiple-output (MIMO) channel enabled by mode division multiplexing in a conventional 50 µm MMF using non-mode-selective three-dimensional waveguide photonic lanterns as mode multiplexer and demultiplexer. The impacts of mode coupling on the MIMO channel coefficients, channel matrix, and channel capacity have been analyzed over different fiber lengths. The results indicate that spatial multiplexing benefits from the greater fiber length with stronger mode coupling, despite a higher optical loss.
2018-03-05
Pediatric Heart Transplantation; Immunosuppression; Chronic Kidney Diseases; Cardiac Allograft Vasculopathy; Heart Transplant Failure and Rejection; Post-transplant Lymphoproliferative Disorder; Heart Transplant Infection
Uncladded sensing fiber for refractive index measurement
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bhardwaj, V., E-mail: bhardwajphyism@gmail.com; Gangwar, R. K.; Pathak, A. K.
2016-05-06
The formation of chemically etched optical fiber for use in refractive index sensor is addressed. This presented design of a refractive index (RI) sensor is based on recording the power loss exhibited by radiation propagating through an etched multimode fiber (MMF) immersed in the liquid under study. The decreasing diameters of fibers are found to be strongly dependent on the temperature and etchant composition. This experiment was performed for different unclad etched fibers for same sensing length and the RI changes from 1.33 RIU to 1.38 RIU. When the multimode fiber (MMF) is etched for 12 hours the sensitivity ofmore » the sensor is approximately 204.25dBm/RIU, which is larger than without etched fiber having sensitivity 127.2dBm/RIU.« less
A Multi-scale Modeling System with Unified Physics to Study Precipitation Processes
NASA Astrophysics Data System (ADS)
Tao, W. K.
2017-12-01
In recent years, exponentially increasing computer power has extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 km2 in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (1) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), and (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF). The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, a review of developments and applications of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the precipitation, processes and their sensitivity on model resolution and microphysics schemes will be presented. Also how to use of the multi-satellite simulator to improve precipitation processes will be discussed.
Using Multi-Scale Modeling Systems and Satellite Data to Study the Precipitation Processes
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo; Chern, J.; Lamg, S.; Matsui, T.; Shen, B.; Zeng, X.; Shi, R.
2011-01-01
In recent years, exponentially increasing computer power has extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 km2 in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (l) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, the recent developments and applications of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the precipitating systems and hurricanes/typhoons will be presented. The high-resolution spatial and temporal visualization will be utilized to show the evolution of precipitation processes. Also how to use of the multi-satellite simulator tqimproy precipitation processes will be discussed.
Using Multi-Scale Modeling Systems and Satellite Data to Study the Precipitation Processes
NASA Technical Reports Server (NTRS)
Tao, Wei--Kuo; Chern, J.; Lamg, S.; Matsui, T.; Shen, B.; Zeng, X.; Shi, R.
2010-01-01
In recent years, exponentially increasing computer power extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 sq km in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale models can be run in grid size similar to cloud resolving models through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (1) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model). (2) a regional scale model (a NASA unified weather research and forecast, W8F). (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, a review of developments and applications of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling systems to study the interactions between clouds, precipitation, and aerosols will be presented. Also how to use the multi-satellite simulator to improve precipitation processes will be discussed.
Using Multi-Scale Modeling Systems to Study the Precipitation Processes
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo
2010-01-01
In recent years, exponentially increasing computer power has extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 km2 in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (1) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, a review of developments and applications of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the interactions between clouds, precipitation, and aerosols will be presented. Also how to use of the multi-satellite simulator to improve precipitation processes will be discussed.
Changes in Plantar Loading Based on Shoe Type and Sex During a Jump-Landing Task
DeBiasio, Justin C.; Russell, Mary E.; Butler, Robert J.; Nunley, James A.; Queen, Robin M.
2013-01-01
Context: Metatarsal stress fractures are common in cleated-sport athletes. Previous authors have shown that plantar loading varies with footwear, sex, and the athletic task. Objective: To examine the effects of shoe type and sex on plantar loading in the medial midfoot (MMF), lateral midfoot (LMF), medial forefoot (MFF), middle forefoot (MidFF), and lateral forefoot (LFF) during a jump-landing task. Design: Crossover study. Setting: Laboratory. Patients or Other Participants: Twenty-seven recreational athletes (14 men, 13 women) with no history of lower extremity injury in the last 6 months and no history of foot or ankle surgery. Main Outcome Measure(s): The athletes completed 7 jumping trials while wearing bladed-cleat, turf-cleat, and running shoes. Maximum force, contact area, contact time, and the force-time integral were analyzed in each foot region. We calculated 2 × 3 analyses of variance (α = .05) to identify shoe-condition and sex differences. Results: We found no shoe × sex interactions, but the MMF, LMF, MFF, and LFF force-time integrals were greater in men (P < .03). The MMF maximum force was less with the bladed-cleat shoes (P = .02). Total foot and MidFF maximum force was less with the running shoes (P < .01). The MFF and LFF maximum forces were different among all shoe conditions (P < .01). Total foot contact area was less in the bladed-cleat shoes (P = .01). The MMF contact area was greatest in the running shoes (P < .01). The LFF contact area was less in the running shoes (P = .03). The MFF and LFF force-time integrals were greater with the bladed-cleat shoes (P < .01). The MidFF force-time integral was less in the running shoes (P < .01). Conclusions: Independent of shoe, men and women loaded the foot differently during a jump landing. The bladed cleat increased forefoot loading, which may increase the risk for forefoot injury. The type of shoe should be considered when choosing footwear for athletes returning to activity after metatarsal stress fractures. PMID:24067149
Romero, G; Panzalis, R; Ruegg, P
2017-11-01
The aim of this paper was to study the relationship between milk flow emission variables recorded during milking of dairy goats with variables related to milking routine, goat physiology, milking parameters and milking machine characteristics, to determine the variables affecting milking performance and help the goat industry pinpoint farm and milking practices that improve milking performance. In total, 19 farms were visited once during the evening milking. Milking parameters (vacuum level (VL), pulsation ratio and pulsation rate, vacuum drop), milk emission flow variables (milking time, milk yield, maximum milk flow (MMF), average milk flow (AVMF), time until 500 g/min milk flow is established (TS500)), doe characteristics of 8 to 10 goats/farm (breed, days in milk and parity), milking practices (overmilking, overstripping, pre-lag time) and milking machine characteristics (line height, presence of claw) were recorded on every farm. The relationships between recorded variables and farm were analysed by a one-way ANOVA analysis. The relationships of milk yield, MMF, milking time and TS500 with goat physiology, milking routine, milking parameters and milking machine design were analysed using a linear mixed model, considering the farm as the random effect. Farm was significant (P<0.05) in all the studied variables. Milk emission flow variables were similar to those recommended in scientific studies. Milking parameters were adequate in most of the farms, being similar to those recommended in scientific studies. Few milking parameters and milking machine characteristics affected the tested variables: average vacuum level only showed tendency on MMF, and milk pipeline height on TS500. Milk yield (MY) was mainly affected by parity, as the interaction of days in milk with parity was also significant. Milking time was mainly affected by milk yield and breed. Also significant were parity, the interaction of days in milk with parity and overstripping, whereas overmilking showed a slight tendency. We concluded that most of the studied variables were mainly related to goat physiology characteristics, as the effects of milking parameters and milking machine characteristics were scarce.
DMF, but not other fumarates, inhibits NF-κB activity in vitro in an Nrf2-independent manner.
Gillard, Geoffrey O; Collette, Brian; Anderson, John; Chao, Jianhua; Scannevin, Robert H; Huss, David J; Fontenot, Jason D
2015-06-15
Fumarate-containing pharmaceuticals are potent therapeutic agents that influence multiple cellular pathways. Despite proven clinical efficacy, there is a significant lack of data that directly defines the molecular mechanisms of action of related, yet distinct fumarate compounds. We systematically compared the impact of dimethyl fumarate (DMF), monomethyl fumarate (MMF) and a mixture of monoethyl fumarate salts (Ca(++), Mg(++), Zn(++); MEF) on defined cellular responses. We demonstrate that DMF inhibited NF-κB-driven cytokine production and nuclear translocation of p65 and p52 in an Nrf2-independent manner. Equivalent doses of MMF and MEF did not affect NF-κB signaling. These results highlight a key difference in the biological impact of related, yet distinct fumarate compounds. Copyright © 2015. Published by Elsevier B.V.
NASA Astrophysics Data System (ADS)
Shi, Jin-Wei; Wei, Chia-Chien; Chen, Jason (Jyehong); Yang, Ying-Jay
2015-03-01
High-speed and "green" ~850 nm vertical-cavity surface-emitting lasers (VCSELs) have lately attracted lots of attention due to their suitability for applications in optical interconnects (OIs). To further enhance the speed and its maximum allowable linking distance of VCSELs are two major trends to meet the requirement of OI in next generation data centers. Recently, by use of the advanced 850 nm VCSEL technique, data rate as high as 64 Gbit/sec over 57m and 20 Gbit/sec over 2km MMF transmission have been demonstrated, respectively. Here, we will review our recent work about 850 nm Zn-diffusion VCSELs with oxide-relief apertures to further enhance the above-mentioned performances. By using Zn-diffusion, we can not only reduce the device resistance but also manipulate the number of optical modes to benefit transmission. Combing such device, which has excellent single-mode (SMSR >30 dB) and high-power (~7mW) performance, with advanced modulation format (OFDM), record-high bit-rate-distance-product through MMF (2.3 km×28 Gbit/sec) has been demonstrated. Furthermore, by selective etching away the oxide aperture inside Zn-diffusion VCSEL, significant enhancement of device speed, D-factor, and reliability can be observed. With such unique VCSEL structure, >40 Gbit/sec energy-efficient transmission over 100m MMF under extremely low-driving current density (<10kA/cm2) has been successfully demonstrated.
NASA Astrophysics Data System (ADS)
Peng, Zhaozhuang; Wang, Li; Yan, Huanhuan
2016-11-01
Application of high temperature fiber sensing system is very extensive. It can be mainly used in high temperature test aerospace, such as, materials, chemicals, and energy. In recent years, various on-line optical fiber interferometric sensors based on modular interference of single-mode-multimode-single-mode(SMS) fiber have been largely explored in high temperature fiber sensor. In this paper we use the special fiber of a polyimide coating, its sensor head is composed of a section of multimode fiber spliced in the middle of Single-mode fiber. When the light is launched into the multimode fiber(MMF) through the lead-in single-mode fiber(SMF), the core mode and cladding modes are excited and propagate in the MMF respectively. Then, at the MMF-SMF spliced point, the excited cladding modes coupled back into the core of lead-out SMF interfere with SMF core mode. And the wavelength of the interference dip would shift differently with the variation of the temperature. By this mean, we can achieve the measurement of temperature. The experimental results also show that the fiber sensor based on SMS structure has a highly temperature sensitivity. From 30° to 300°, with the temperature increasing, the interference dip slightly shifts toward longer wavelength and the temperature sensitivity coefficient is 0.0115nm/°. With high sensitivity, simple structure, immunity to electromagnetic interferences and a good linearity of the experimental results, the structure has an excellent application prospect in engineering field.
Demixing in simple dipolar mixtures: Integral equation versus density functional results
NASA Astrophysics Data System (ADS)
Range, Gabriel M.; Klapp, Sabine H. L.
2004-09-01
Using reference hypernetted chain (RHNC) integral equations and density functional theory in the modified mean-field (MMF) approximation we investigate the phase behavior of binary mixtures of dipolar hard spheres. The two species ( A and B ) differ only in their dipole moments mA and mB , and the central question investigated is under which conditions these asymmetric mixtures can exhibit demixing phase transitions in the fluid phase regime. Results from our two theoretical approaches turn out to strongly differ. Within the RHNC (which we apply to the isotropic high-temperature phase) demixing does indeed occur for dense systems with small interaction parameters Γ=mB2/mA2 . This result generalizes previously reported observations on demixing in mixtures of dipolar and neutral hard spheres (Γ=0) to the case of true dipolar hard sphere mixtures. The RHNC approach also indicates that these demixed fluid phases are isotropic at temperatures accessible by the theory, whereas isotropic-to-ferroelectric transitions occur only at larger Γ . The MMF theory, on the other hand, yields a different picture in which demixing occurs in combination with spontaneous ferroelectricity at all Γ considered. This discrepancy underlines the relevance of correlational effects for the existence of demixing transitions in dipolar systems without dispersive interactions. Indeed, supplementing the dipolar interactions by small, asymmetric amounts of van der Waals-like interactions (and thereby supporting the systems tendency to demix) one finally reaches good agreement between MMF and RHNC results.
Rousseau, Annick; Laroche, Marie-Laure; Venisse, Nicolas; Loichot-Roselmac, Cecile; Turcant, Alain; Hoizey, Guillaume; Compagnon, Patricia; Hary, Lionel; Debruyne, Danièle; Saivin, Sylvie; Jacqz-Aigrain, Evelyne; Buchler, Mathias; Villeneuve, Claire; Vergnenègre, Alain; Le Meur, Yannick; Marquet, Pierre
2010-05-27
In the prospective, randomized, multicenter APOMYGRE trial conducted in France, concentration-controlled mycophenolate mofetil (MMF) dosing based on mycophenolic acid (MPA) exposure significantly reduced the treatment failure and acute rejection during the first posttransplantation year compared with fixed-dose MMF. This analysis investigated the cost effectiveness of dose individualization. The study included 65 patients per group (intent-to-treat population). Treatment failure (primary efficacy endpoint) was defined as death, graft loss, acute rejection, or MMF discontinuation because of adverse effects. Data on hospitalizations, drugs prescribed, physicians' fees, laboratory expenses, ambulatory visits, and transportation were retrieved. Costs were calculated from the French National Health System perspective. The mean (95% confidence interval) total yearly cost per patient was Euro 47,477 (Euro 43,933; Euro 51,020) in the concentration-controlled group and Euro 46,783 ( Euro 44,152; Euro 49,414) in the fixed-dose group (P=0.7). The observed incremental cost-effectiveness ratio was Euro 3757 per treatment failure (Purchasing Power Parities United States/France: $4129). Hospitalization and drug costs accounted for approximately 50% and 25% of total costs, respectively. The cost for MPA area under the concentration-time curve and dose calculation was Euro 452 per patient, less than 1% of the total cost. In the APOMYGRE trial, therapeutic MPA monitoring using a limited sampling strategy reduced the risk of treatment failure and acute rejection in renal allograft recipients during the first 12 months posttransplantation, at neutral cost.
Boillot, Olivier; Seket, Belhassen; Dumortier, Jérôme; Pittau, Gabriella; Boucaud, Catherine; Bouffard, Yves; Scoazec, Jean-Yves
2009-11-01
This randomized, comparative study assessed the long-term efficacy and tolerability of thymoglobulin (TMG) induction in 93 liver transplant patients with an initial regimen of tacrolimus (Tac), mycophenolate mofetil (MMF), and steroids. Forty-four patients were randomly allocated to the TMG+ group, and 49 patients were randomly allocated to the TMG- group. In both groups, Tac was given orally at the initial daily dose of 0.075 mg/kg twice daily, and MMF was given at the initial daily dose of 2 g/day. Steroid withdrawal was planned at 3 months after liver transplantation. The results were evaluated with respect to acute rejection incidence, patient and graft survival, graft function, and medical complications until 5 years or death for all patients. No significant differences were found between groups for the incidence of acute rejection at 5 years (11.4% versus 14.3%), 5-year patient survival (77.3% versus 87.8%), graft function, or postoperative renal function. One patient in the TMG- group underwent retransplantation. There was no difference between groups with respect to the incidence of medical complications, excepted for a higher rate of leukopenia in the TMG+ group, during the 5-year follow-up. In conclusion, the results of this prospective randomized study suggest that the addition of TMG to a triple immunosuppressive regimen (Tac, MMF, and steroids) did not modify the incidence of acute rejection episodes or long-term survival and was responsible for increased leukopenia rates.
Neural Signatures of Phonetic Learning in Adulthood: A Magnetoencephalography Study
Zhang, Yang; Kuhl, Patricia K.; Imada, Toshiaki; Iverson, Paul; Pruitt, John; Stevens, Erica B.; Kawakatsu, Masaki; Tohkura, Yoh'ichi; Nemoto, Iku
2010-01-01
The present study used magnetoencephalography (MEG) to examine perceptual learning of American English /r/ and /l/ categories by Japanese adults who had limited English exposure. A training software program was developed based on the principles of infant phonetic learning, featuring systematic acoustic exaggeration, multi-talker variability, visible articulation, and adaptive listening. The program was designed to help Japanese listeners utilize an acoustic dimension relevant for phonemic categorization of /r-l/ in English. Although training did not produce native-like phonetic boundary along the /r-l/ synthetic continuum in the second language learners, success was seen in highly significant identification improvement over twelve training sessions and transfer of learning to novel stimuli. Consistent with behavioral results, pre-post MEG measures showed not only enhanced neural sensitivity to the /r-l/ distinction in the left-hemisphere mismatch field (MMF) response but also bilateral decreases in equivalent current dipole (ECD) cluster and duration measures for stimulus coding in the inferior parietal region. The learning-induced increases in neural sensitivity and efficiency were also found in distributed source analysis using Minimum Current Estimates (MCE). Furthermore, the pre-post changes exhibited significant brain-behavior correlations between speech discrimination scores and MMF amplitudes as well as between the behavioral scores and ECD measures of neural efficiency. Together, the data provide corroborating evidence that substantial neural plasticity for second-language learning in adulthood can be induced with adaptive and enriched linguistic exposure. Like the MMF, the ECD cluster and duration measures are sensitive neural markers of phonetic learning. PMID:19457395
Baker, Stephen B; Reid, Russell R; Burkey, Brooke; Bartlett, Scott P
2007-09-01
To shorten head frame wear time associated with external halo distraction (HD), we have adapted a protocol for maxillary distraction with the halo system that integrates plate fixation. All patients had a history of cleft lip and/or palate and maxillary retrusion > or = 8 mm. Five patients treated with this protocol and followed for at least 1 year were included in this study. The protocol included a 3-day latency period, variable maxillary distraction, and removal of the halo device with simultaneous rigid internal fixation. Two patients had a variable period of maxillomandibular fixation (MMF), which maintained the maxillary advancement and idealized intercuspal position while permitting further callus maturation. Cephalographs were obtained preoperatively, immediately following distractor removal, and 1 year after rigid internal fixation. The mean age at time of surgery was 18.7 years. The maxillary deficiency ranged from 8 to 15 mm (mean = 10.6 mm). All five patients demonstrated excellent occlusion. Cephalometric analysis 1-year post rigid internal fixation revealed minimal (<1 mm) skeletal relapse. Rapid maxillary distraction followed by MMF to maintain maxillary advancement may reduce halo device wear to 1 to 2 weeks. MMF optimizes occlusion by forcing the maxillary teeth into maximal intercuspal position. Rigid fixation is not only associated with less long-term relapse compared to nonrigid forms of fixation, but also minimizes the incidence of nonunion. This treatment protocol provides the advancement possible with distraction osteogenesis and the accuracy of orthognathic surgery, thereby minimizing external head frame wear.
Modelling erosion on a daily basis, an adaptation of the MMF approach
NASA Astrophysics Data System (ADS)
Shrestha, Dhruba Pikha; Jetten, Victor G.
2018-02-01
Effect of soil erosion causing negative impact on ecosystem services and food security is well known. On the other hand there can be yearly variation of total precipitation received in an area, with the presence of extreme rains. To assess annual erosion rates various empirical models have been extensively used in all the climatic regions. While these models are simple to operate and do not require lot of input data, the effect of extreme rain is not taken into account. Although physically based models are available to simulate erosion processes including particle detachment, transportation and deposition of sediments during a storm they are not applicable for assessing annual soil loss rates. Moreover storm event data may not be available everywhere prohibiting their extensive use.
2014-01-01
Ni2+ is a highly toxic above 0.07 mg/L and its removal is of high significance. The biosorption of Ni2+ onto medlar male flowers (MMF) was studied in relation with the physical parameters like pH, contact time, biosorbent dosage, Ni2+ concentration and temperature. The interaction biosorbent-Ni2+ was examined by the FTIR technique. The equilibrium was achieved within 40 min and the data were well fitted by the Langmuir and Redlich-Peterson (R-P) models. The maximum Ni2+ uptake capacity was 17.073 mg/g at 25°C and the Ni2+ removal follows a pseudo-second order kinetic with activation energy of 13.3 kJ/mol. The thermodynamic parameters: ΔS°, ΔH° and ΔG° showed that the biosorption was spontaneous and endothermic. MMF was used as a post treatment technique and the biosorption was coupled with the visible light driven Ni2+ reduction over the spinel ZnMn2O4. The effect of the pH, ZnMn2O4 loading and light intensity on the photoactivity was investigated. 77.5% of Ni2+ was reduced after ~140 min under optimal conditions. The Ni2+ removal reached a rate conversion of 96% of with the coupled system biosorption/photocatalysis is very promising for the water treatment. PMID:24401700
Sauer, Roland; Gölitz, Philipp; Jacobi, Johannes; Schwab, Stefan; Linker, Ralf A; Lee, De-Hyung
2017-04-15
Progressive multifocal leukoencephalopathy (PML) is a rare, opportunistic and often fatal disease of the CNS which may occur under immunosuppression in transplant patients. Brain stem PML is associated with a particularly bad prognosis. Here, we present a case of a renal transplant patient treated with mycophenolate mofetil (MMF) and tacrolimus who developed brain stem PML with limb ataxia, dysarthria and dysphagia. Diagnosis was established by typical MRI features and detection of JCV-DNA in the CSF. Immune reconstitution after stopping MMF and tacrolimus led to a complete and sustained remission of symptoms with improvement of the brain stem lesion over a follow-up over 20months. In summary, early detection of PML and consequent treatment may improve neurological outcomes even in brain stem disease with a notorious bad prognosis. Copyright © 2017 Elsevier B.V. All rights reserved.
Switchable multiwavelength thulium-doped fiber ring lasers
NASA Astrophysics Data System (ADS)
Zhao, Shui; Lu, Ping; Liu, Deming; Zhang, Jiangshan
2013-08-01
Two kinds of thulium-doped fiber ring lasers based on a spatial mode beating filter and comb filtering effect are presented and experimentally demonstrated, which all show multiwavelength laser spectrum around 2 μm. In the implementation of the first type of experiment configuration by the use of a piece of multimode fiber (MMF) as a spatial mode beating filter, dual-,triple-, and quadruple-wavelengths appeared whose extinction noise ratio is 25 dB by adjusting the angle of polarization controller. Different wavelength spaces are obtained by inserting different lengths of MMF. The second type is achieved by inserting a Sagnac loop mirror, which was constructed by a 3-dB coupler and a piece of polarization maintaining fiber. Seven stable wavelengths with channel spacing of 0.65 nm and an extinction ratio of 35 dB was achieved. These systems are simple and easy to construct, which can be useful for 2 μm wavelength-division-multiplexed applications.
[Clinical views from the forefront of immunosuppressive drugs].
Kobayashi, Eiji
2005-11-01
Recently, many immunosuppressants have been developed and some of them have already been introduced in clinical organ transplantation. With a new concept of immunoregulation, which focuses on prevention of rejection and over-immunosuppression, the latest protocol has been conducted. Chimeric or humanized antibodies targeting the lymphocyte surface molecule such as CD19, 20, 25, 40, and 52 are administrated in the induction phase, and calcineurin inhibitors (cyclosporin and tacrolimus) are used as key drugs. For tapering the doses of them, the combined application of anti-metabolic agents of azathioprine, mizoribine, or mycophenolate mofetil (MMF) has been proved effective. Lymphocyte forming drugs induce unique immunoregulation, targeting at sphingosine 1-phosphate (SlP) receptors. FTY720 is now in the procedure of clinical trial to compare with MMF. KRP203 is also a candidate for more specific SIP receptor agonist. In this issue, I reviewed the recent immunosuppressive strategy and focused on the advance of novel immunosuppressive drugs.
A matched filter approach for blind joint detection of galaxy clusters in X-ray and SZ surveys
NASA Astrophysics Data System (ADS)
Tarrío, P.; Melin, J.-B.; Arnaud, M.
2018-06-01
The combination of X-ray and Sunyaev-Zeldovich (SZ) observations can potentially improve the cluster detection efficiency, when compared to using only one of these probes, since both probe the same medium, the hot ionized gas of the intra-cluster medium. We present a method based on matched multifrequency filters (MMF) for detecting galaxy clusters from SZ and X-ray surveys. This method builds on a previously proposed joint X-ray-SZ extraction method and allows the blind detection of clusters, that is finding new clusters without knowing their position, size, or redshift, by searching on SZ and X-ray maps simultaneously. The proposed method is tested using data from the ROSAT all-sky survey and from the Planck survey. The evaluation is done by comparison with existing cluster catalogues in the area of the sky covered by the deep SPT survey. Thanks to the addition of the X-ray information, the joint detection method is able to achieve simultaneously better purity, better detection efficiency, and better position accuracy than its predecessor Planck MMF, which is based on SZ maps alone. For a purity of 85%, the X-ray-SZ method detects 141 confirmed clusters in the SPT region; to detect the same number of confirmed clusters with Planck MMF, we would need to decrease its purity to 70%. We provide a catalogue of 225 sources selected by the proposed method in the SPT footprint, with masses ranging between 0.7 and 14.5 ×1014 M⊙ and redshifts between 0.01 and 1.2.
Martins, L; Fonseca, I; Sousa, S; Matos, C; Santos, J; Dias, L; Henriques, A C; Sarmento, A M; Cabrita, A
2007-10-01
New immunosuppressive drugs used in kidney transplantation decreased the incidence of acute rejection. It was hypothesized that, with their power, the importance of HLA matching was decreased. To evaluate the influence of HLA matching, immunosuppression, and other possible risk factors, we analyzed data of 1314 consecutive deceased donor kidney transplantation. We divided the patient population into 4 cohorts, according to the era of transplantation: era 1, before 1990, azathioprine (Aza) and cyclosporine (Csa) no microemulsion; era 2, between 1990 and 1995, Csa microemulsion; era 3, between 1996 and 2000, wide use of mycophenolate mofetil (MMF) and anti-thymocyte globulin (ATG); and era 4, after 2000, marked by sirolimus and tacrolimus (TAC) use. Multivariate analysis compared death-censored graft survival. Using as reference the results obtained with 0 HLA mismatches, we verified, during era 1 and era 2, an increased risk of graft loss for all of the subgroups with HLA mismatch >0. However, during era 3 and era 4, the number of HLA mismatches did not influence graft survival. Although acute rejection and delayed graft function, which decreased in the later periods, remained as prognostic factors for graft loss. Considering the immunosuppressive protocol with Csa+Aza+Pred as reference, protocols used after 1995 with Pred+Csa+ATG, with Pred+Csa+MMF, and with Pred+Tac+MMF presented better survival results. Results showed that the significance of HLA matching decreased while the results improved with the new immunosuppressant drugs. These observations support the hypothesis that the weakened importance of HLA matching may be a consequence of the increasing efficacy of the immunosuppression.
Brum, S; Nolasco, F; Sousa, J; Ferreira, A; Possante, M; Pinto, J R; Barroso, E; Santos, J R
2008-04-01
Cytomegalovirus (CMV) is the most common viral infection after transplantation. Valganciclovir (VGC) is established for prophylaxis and treatment of CMV infections, but leukopenia which appears in 10% to 13% (severe in 4.9%) is the principal side effect. We have recently noted an increased incidence of leukopenia and severe neutropenia among our renal transplant patients and thought to identify the associated factors. We conducted a retrospective analysis of all kidney transplantations performed between January 2005 and December 2006. All patients received mycophenolate mofetil (MMF), tacrolimus, and steroids. VGC was used for targeted prophylaxis and preemptive therapy of CMV infection, with doses adjusted to renal function. Of the 64 patients undergoing renal transplantation 13 (20.3%) developed leukopenia within 3 +/- 2 months after transplantation with severe neutropenia in 5 (7.8%). All patients were on MMF and VGC (VGC 605 +/- 296 mg/d). Leukopenia was significantly associated with simultaneous liver-kidney transplantation and with second kidney transplantations (P < .01). The incidence of leukopenia was higher among patients under VGC since day 1 of transplantation (P = .008) with maximal incidence observed among patients prescribed 900 mg/d as opposed to those on lower doses (P < .01). There was no increase in CMV infection among patients with a low dose of VGC. No patient developed clinical CMV disease. In conclusion, VGC prophylaxis was associated with an increased frequency of leukopenia on MMF-tacrolimus treated patients or regimens. Low-dose VGC for CMV prophylaxis appeared to be as effective as high-dose treatment, and associated less frequently with leukopenia and neutropenia.
Hao, Chen; Erzheng, Chen; Anwei, Mao; Zhicheng, Yu; Baiyong, Shen; Xiaxing, Deng; Weixia, Zhang; Chenghong, Peng; Hongwei, Li
2007-12-01
Mycophenolate mofetil (MMF) is indicated as immunosuppressive therapy in liver transplantation. The abbreviated models for the estimation of mycophenolic acid (MPA) area under the concentration-time curve (AUC) have been established by limited sampling strategies (LSSs) in adult liver transplant recipients. In the current study, the performance of the abbreviated models to predict MPA exposure was validated in an independent group of patients. A total of 30 MPA pharmacokinetic profiles from 30 liver transplant recipients receiving MMF in combination with tacrolimus were used to compare 8 models' performance with a full 10 time-point MPA-AUC. Linear regression analysis and Bland-Altman analysis were used to compare the estimated MPA-AUC0-12h from each model against the measured MPA-AUC0-12h. A wide range of agreement was shown when estimated MPA-AUC0-12h was compared with measured MPA-AUC0-12h, and the range of coefficient of determination (r2) was from 0.479 to 0.936. The model based on MPA pharmacokinetic parameters C1h, C2h, C6h, and C8h had the best ability to predict measured MPA-AUC0-12h, with the best coefficient of determination (r2=0.936), the excellent prediction bias (2.18%), the best prediction precision (5.11%), and the best prediction variation (2SD=+/-7.88 mg.h/L). However, the model based on MPA pharmacokinetic sampling time points C1h, C2h, and C4h was more suitable when concerned with clinical convenience, which had shorter sampling interval, an excellent coefficient of determination (r2=0.795), an excellent prediction bias (3.48%), an acceptable prediction precision (14.37%), and a good prediction variation (2SD=+/-13.23 mg.h/L). Measured MPA-AUC0-12h could be best predicted by using MPA pharmacokinetic parameters C1h, C2h, C6h, and C8h. The model based on MPA pharmacokinetic parameters C1h, C2h, and C4h was more feasible in clinical application. Copyright (c) 2007 AASLD.
NASA Astrophysics Data System (ADS)
Kasim, Muhammad; Irasari, Pudji; Hikmawan, M. Fathul; Widiyanto, Puji; Wirtayasa, Ketut
2017-02-01
The axial flux permanent magnet generator (AFPMG) has been widely used especially for electricity generation. The effect of the air gap variation on the characteristic and performances of single rotor - single stator AFPMG has been described in this paper. Effect of air gap length on the magnetic flux distribution, starting torque and MMF has been investigated. The two dimensional finite element magnetic method has been deployed to model and simulated the characteristics of the machine which is based on the Maxwell equation. The analysis has been done for two different air gap lengths which were 2 mm and 4 mm using 2D FEMM 4.2 software at no load condition. The increasing of air gap length reduces the air-gap flux density. For air gap 2 mm, the maximum value of the flux density was 1.04 T while 0.73 T occured for air gap 4 mm.. Based on the experiment result, the increasing air gap also reduced the starting torque of the machine with 39.2 Nm for air gap 2 mm and this value decreased into 34.2 Nm when the air gap increased to 4 mm. Meanwhile, the MMF that was generated by AFPMG decreased around 22% at 50 Hz due to the reduction of magnetic flux induced on stator windings. Overall, the research result showed that the variation of air gap has significant effect on the machine characteristics.
Effect of Frequency and Spatial-Harmonics on Rotary and Linear Induction Motor Characteristics
DOT National Transportation Integrated Search
1972-03-01
A computer analysis is made of the effect of current and MMF airgap harmonics on the output characteristics of rotary and linear induction motors. The current harmonics accompanying thyristor-control operation are evaluated by Fourier analyzing the p...
Carnevale-Schianca, Fabrizio; Caravelli, Daniela; Gallo, Susanna; Coha, Valentina; D'Ambrosio, Lorenzo; Vassallo, Elena; Fizzotti, Marco; Nesi, Francesca; Gioeni, Luisa; Berger, Massimo; Polo, Alessandra; Gammaitoni, Loretta; Becco, Paolo; Giraudo, Lidia; Mangioni, Monica; Sangiolo, Dario; Grignani, Giovanni; Rota-Scalabrini, Delia; Sottile, Antonino; Fagioli, Franca; Aglietta, Massimo
2017-03-01
Allogeneic hematopoietic cell transplant (HCT) remains the only curative therapy for many hematologic malignancies but it is limited by high nonrelapse mortality (NRM), primarily from unpredictable control of graft-versus-host disease (GVHD). Recently, post-transplant cyclophosphamide demonstrated improved GVHD control in allogeneic bone marrow HCT. Here we explore cyclophosphamide in allogeneic peripheral blood stem cell transplantation (alloPBSCT). Patients with high-risk hematologic malignancies received alloPBSCT from HLA-matched unrelated/related donors. GVHD prophylaxis included combination post-HCT cyclophosphamide 50 mg/kg (days +3 and +4) and tacrolimus/mofetil mycophenolate (T/MMF) (day +5 forward). The primary objective was the cumulative incidence of acute and chronic GVHD. Between March 2011 and May 2015, 35 consecutive patients received the proposed regimen. MMF was stopped in all patients at day +28; the median discontinuation of tacrolimus was day +113. Acute and chronic GVHD cumulative incidences were 17% and 7%, respectively, with no grade IV GVHD events, only 2 patients requiring chronic GVHD immunosuppression control, and no deaths from GVHD. Two-year NRM, overall survival, event-free survival, and chronic GVHD event-free survival rates were 3%, 77%, 54%, and 49%, respectively. The graft-versus-tumor effect was maintained as 5 of 15 patients (33%) who received HCT with evidence of disease experienced further disease response. A post-transplant cyclophosphamide + T/MMF combination strategy effectively prevented acute and chronic GVHD after alloPBSCT from HLA-matched donors and achieved an unprecedented low NRM without losing efficacy in disease control or impaired development of the graft-versus-tumor effect. This trial is registered at clinicaltrials.gov as NCT02300571. Copyright © 2017 The American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.
Nieto, Yago; Patton, Nigel; Hawkins, Timothy; Spearing, Ruth; Bearman, Scott I; Jones, Roy B; Shpall, Elizabeth J; Rabinovitch, Rachel; Zeng, Chan; Barón, Anna; McSweeney, Peter A
2006-02-01
We evaluated tacrolimus/mycophenolate mofetil (MMF) for graft-versus-host disease (GVHD) prophylaxis after a nonmyeloablative stem cell transplantation (NST) from a matched sibling donor (MSD). Thirty-two patients (median age, 57 years) with advanced hematologic malignancies, who were poor candidates for a conventional myeloablative transplantation, received fludarabine (30 mg/m(2), day -4 to day -2), total-body irradiation (TBI) (200 cGy, day 0), infusion of donor peripheral blood progenitor cells (day 0), oral tacrolimus 0.06 mg/kg twice daily (from day 3), and oral MMF at 15 mg/kg twice daily (days 0-+27). Tacrolimus was tapered from day +100 to day +180 in those patients with indolent malignancies (n = 25), and from day +35 to day +56 in those with aggressive tumors (n = 7). Regimen toxicities and myelosuppression were mild, allowing 75% of patients to have entirely outpatient transplantations. One patient (3%) experienced a nonfatal graft rejection. Rates of grades II-IV and III-IV acute GVHD were 15.6% and 3%, respectively. Acute GVHD was diagnosed at median day +78 (range, days +31-+84). Extensive chronic GVHD was observed in 10 of 24 evaluable patients (41.6%) at a median onset of day +198 (range, days +128-+277), either spontaneously (n = 5) or elicited after tumor progression (n = 5). Five patients experienced transplantation-related mortality (TRM) (15.6%) from either acute GVHD-related multiorgan failure (MOF) (n = 3) or infectious complications (n = 2). At median follow-up of 19 months (range, 2-41 months), the overall survival, progression-free survival, and disease-free survival rates are 62.5%, 50%, and 40%, respectively. In conclusion, the use of tacrolimus/MMF after MSD NST is associated with encouraging rates of GVHD control.
Hüske, Christin; Sander, Svenja Esther; Hamann, Melanie; Kershaw, Olivia; Richter, Franziska; Richter, Angelika
2016-07-01
Although injectable anesthetics are still widely used in laboratory rodents, scientific data concerning pain and distress during and after stereotactic surgery are rare. However, optimal anesthesia protocols have a high impact on the quality of the derived data. We therefore investigated the suitability of recommended injectable anesthesia with a traditionally used monoanesthesia for stereotactic surgery in view of optimization and refinement in rats. The influence of the recommended complete reversal anesthesia (MMF; 0.15mg/kg medetomidine, 2mg/kg midazolam, 0.005mg/kg fentanyl; i.m.) with or without reversal and of chloral hydrate (430mg/kg, 3.6%, i.p.) on various physiological, biochemical and behavioral parameters (before, during, after surgery) was analyzed. Isoflurane was also included in stress parameter analysis. In all groups, depth of anesthesia was sufficient for stereotactic surgery with no animal losses. MMF caused transient exophthalmos, myositis at the injection site and increased early postoperative pain scores. Reversal induced agitation, restlessness and hypothermia. Even the low concentrated chloral hydrate led to peritonitis and multifocal liver necrosis, corresponding to increased stress hormone levels and loss in body weight. Increased stress response was also exerted by isoflurane anesthesia. Pronounced systemic toxicity of chloral hydrate strongly questions its further use in rodent anesthesia. In view of undesired effects of MMF and isoflurane, thorough consideration of anesthesia protocols for particular research projects is indispensable. Reversal should be restricted to emergency situations. Our data support further refinement of the current protocols and the importance of sham operated controls. Copyright © 2016 Elsevier B.V. All rights reserved.
Zhou, G.; Guan, L.; Wei, X.; Zhang, Dongxiao; Zhang, Q.; Yan, J.; Wen, D.; Liu, J.; Liu, S.; Huang, Z.; Kong, G.; Mo, J.; Yu, Q.
2007-01-01
Evaluation of litterfall production is important for understanding nutrient cycling, forest growth, successional pathways, and interactions with environmental variables in forest ecosystems. Litterfall was intensively studied during the period of 1982-2001 in two subtropical monsoon vegetation gradients in the Dinghushan Biosphere Reserve, Guangdong Province, China. The two gradients include: (1) a successional gradient composed of pine forest (PF), mixed pine and broadleaved forest (MF) and monsoon evergreen broadleaved forest (BF), and (2) an altitudinal gradient composed of Baiyunci ravine rain forest (BRF), Qingyunci ravine rain forest (QRF), BF and mountainous evergreen broadleaved forest (MMF). Mean annual litterfall production was 356, 861 and 849 g m-2 for PF, MF and BF of the successional gradient, and 1016, 1061, 849 and 489 g m-2 for BRF, QRF, BF and MMF of the altitudinal gradient, respectively. As expected, mean annual litterfall of the pioneer forest PF was the lowest, but rapidly increased over the observation period while those in other forests were relatively stable, confirming that forest litterfall production is closely related to successional stages and growth patterns. Leaf proportions of total litterfall in PF, MF, BF, BRF, QRF and MMF were 76.4%, 68.4%, 56.8%, 55.7%, 57.6% and 69.2%, respectively, which were consistent with the results from studies in other evergreen broadleaved forests. Our analysis on litterfall monthly distributions indicated that litterfall production was much higher during the period of April to September compared to other months for all studied forest types. Although there were significant impacts of some climate variables (maximum and effective temperatures) on litterfall production in some of the studied forests, the mechanisms of how climate factors (temperature and rainfall) interactively affect litterfall await further study. ?? 2006 Springer Science+Business Media B.V.
Maxillomandibular Fixation by Plastic Surgeons: Cost Analysis and Utilization of Resources.
Farber, Scott J; Snyder-Warwick, Alison K; Skolnick, Gary B; Woo, Albert S; Patel, Kamlesh B
2016-09-01
Maxillomandibular fixation (MMF) can be performed using various techniques. Two common approaches used are arch bars and bone screws. Arch bars are the gold standard and inexpensive, but often require increased procedure time. Bone screws with wire fixation is a popular alternative, but more expensive than arch bars. The differences in costs of care, complications, and operative times between these 2 techniques are analyzed. A chart review was conducted on patients treated over the last 12 years at our institution. Forty-four patients with CPT code 21453 (closed reduction of mandible fracture with interdental fixation) with an isolated mandible fracture were used in our data collection. The operating room (OR) costs, procedure duration, and complications for these patients were analyzed. Operative times were significantly shorter for patients treated with bone screws (P < 0.002). The costs for one trip to the OR for either method of fixation did not show any significant differences (P < 0.840). More patients with arch bar fixation (62%) required a second trip to the OR for removal in comparison to those with screw fixation (31%) (P < 0.068). This additional trip to the OR added significant cost. There were no differences in patient complications between these 2 fixation techniques. The MMF with bone screws represents an attractive alternative to fixation with arch bars in appropriate scenarios. Screw fixation offers reduced costs, fewer trips to the OR, and decreased operative duration without a difference in complications. Cost savings were noted most significantly in a decreased need for secondary procedures in patients who were treated with MMF screws. Screw fixation offers potential for reducing the costs of care in treating patients with minimally displaced or favorable mandible fractures.
NASA Astrophysics Data System (ADS)
Evtushenko, Alexander S.; Faskhutdinov, Lenar M.; Kafarova, Anastasia M.; Kuznetzov, Artem A.; Minaeva, Alina Yu.; Sevruk, Nikita L.; Nureev, Ilnur I.; Vasilets, Alexander A.; Andreev, Vladimir A.; Morozov, Oleg G.; Burdin, Vladimir A.; Bourdine, Anton V.
2017-04-01
This work presents results of experimental approbation of earlier on proposed modified fiber optic stress sensor based on a few-mode effects occurring during laser-excited optical signal propagation over silica multimode optical fiber (MMF). Modification is concerned with a passage to quasi-interferometric scheme realized by two multimode Y-couplers with equalized arm lengths improved by fiber Bragg grating (FBG) written on preliminary formed precision macrostructure defects in silica multimode graded-index optical fibers and special offset launching conditions providing laser-based excitation of higher-order modes. The "arms" of quasi-interferometer are two equalized lengths of MMF Cat. OM2 with great central dip of refractive index profile and strong pulse splitting due to high differential mode delay (DMD). We tested FBGs with Bragg wavelength both 1310 nm and 1550 nm written over tapers or up-tapers preliminary formed in short pieces of MMF Cat. OM2+/OM3 and further jointed to the end of one of the arms before output Y-coupler. Researches were focused on comparison analysis of pulse responses under changing of selected excited mode mixing and power diffusion processes due to stress distributed action to sensor fiber depending. Here we considered FBGs not only as particular wavelength reflector during spectral response measurement but also as local periodic microstructure defect which strongly effects on few-mode signal components mixing process also improved by combination with macro-defect like taper or up-taper that should provide response variation. Some results pulse response measurements produced for different scheme configuration and their comparison analysis are represented.
Shakya, Anshul; Soni, Upendra Kumar; Rai, Geeta; Chatterjee, Shyam Sunder; Kumar, Vikas
2016-05-01
Results of the very first experiments conducted to evaluate therapeutic potentials of a fumarate containing Fumaria indica extract and of fairly low daily oral doses of monomethyl fumarate for prevention of chronic unavoidable foot-shock stress-induced gastric ulcers, and possible involvement of diverse neuro-hormonal and oxidative process in their stress response desensitizing effects are reported and discussed in this article. Preventive effects of 21 daily oral 60, 120, and 240 mg/kg doses of a standardized 50 % methanolic F. indica extract (MFI) and 1.25, 2.50, and 5.00 mg/kg/day of pure monomethyl fumarate (MMF) were compared in rats subjected to one hour daily unavoidable foot-shocks. A pharmaceutically well-standardized Withania somnifera (WS) root extract was used as a reference herbal anti-stress agent in all experiments. Effects of the treatments on stress-induced alterations in body weight, adrenal and spleen weights, gastric ulcer and ulcer index, weight of glandular stomach, protective mucosal glycoprotein content, cellular proliferation, oxidative stress on stomach fundus, and brain tissues of male rats were quantified. Other parameters quantified were plasma corticosterone levels, brain monoamine levels, and expressions of the cytokines TNF-α, IL-10, and IL-1β in blood and brain of stressed and treated rats. Most but not every observed stress-induced anomalies were suppressed or completely prevented by both MFI and pure MMF treatments in dose-dependent manner. Qualitatively, the observed activity profiles of both of them were similar to those of WS dose tested. These results reveal that both MFI and MMF are potent gastro-protective agents against chronic unavoidable stress-induced ulcers and strongly suggest that they act as regulators or modulators of monoamine, corticosterone, and cytokine homeostasis.
Singularity Analysis: a powerful image processing tool in remote sensing of the oceans
NASA Astrophysics Data System (ADS)
Turiel, A.; Umbert, M.; Hoareau, N.; Ballabrera-Poy, J.; Portabella, M.
2012-04-01
The study of fully developed turbulence has given rise to the development of new methods to describe real data of scalars submitted to the action of a turbulent flow. The application of this brand of methodologies (known as Microcanonical Multifractal Formalism, MMF) on remote sensing ocean maps open new ways to exploit those data for oceanographic purposes. The main technique in MMF is that of Singularity Analysis (SA). By means of SA a singularity exponents is assigned to each point of a given image. The singularity exponent of a given point is a dimensionless measure of the regularity or irregularity of the scalar at that point. Singularity exponents arrange in singularity lines, which accurately track the flow streamlines from any scalar, as we have verified with remote sensing and simulated data. Applications of SA include quality assessment of different products, the estimation of surface velocities, the development of fusion techniques for different types of scalars, comparison with measures of ocean mixing, and improvement in assimilation schemes.
Highly Sensitive Liquid Core Temperature Sensor Based on Multimode Interference Effects
Fuentes-Fuentes, Miguel A.; May-Arrioja, Daniel A.; Guzman-Sepulveda, José R.; Torres-Cisneros, Miguel; Sánchez-Mondragón, José J.
2015-01-01
A novel fiber optic temperature sensor based on a liquid-core multimode interference device is demonstrated. The advantage of such structure is that the thermo-optic coefficient (TOC) of the liquid is at least one order of magnitude larger than that of silica and this, combined with the fact that the TOC of silica and the liquid have opposite signs, provides a liquid-core multimode fiber (MMF) highly sensitive to temperature. Since the refractive index of the liquid can be easily modified, this allows us to control the modal properties of the liquid-core MMF at will and the sensor sensitivity can be easily tuned by selecting the refractive index of the liquid in the core of the device. The maximum sensitivity measured in our experiments is 20 nm/°C in the low-temperature regime up to 60 °C. To the best of our knowledge, to date, this is the largest sensitivity reported for fiber-based MMI temperature sensors. PMID:26512664
Impact of the ALMS and MAINTAIN trials on the management of lupus nephritis.
Morris, Heather K; Canetta, Pietro A; Appel, Gerald B
2013-06-01
Current treatment of lupus nephritis consists of both induction and maintenance therapy, with the latter being designed to consolidate remissions and prevent relapses. Long-term maintenance treatment with intravenous cyclophosphamide was effective but associated with considerable toxicity. A small but well-designed controlled trial found that for post-induction maintenance therapy, both oral mycophenolate mofetil (MMF) and oral azathioprine were superior in efficacy and had reduced toxicity than a regimen of continued every third month intravenous cyclophosphamide. Although these oral agents were rapidly accepted and utilized as maintenance medications, their usage was based on scant evidence and there were no comparisons between the two. Recently, two relatively large, randomized, well-controlled, multicenter trials dealing with maintenance therapy for severe lupus nephritis have been completed. The Aspreva Lupus Management Study (ALMS) maintenance and MAINTAIN nephritis trials provide important information regarding the comparative efficacy and safety of MMF and azathioprine as maintenance therapies, as well as information on the effect of dosage and duration of treatment with these agents.
Realization of fiber optic displacement sensors
NASA Astrophysics Data System (ADS)
Guzowski, Bartlomiej; Lakomski, Mateusz
2018-03-01
Fiber optic sensors are very promising because of their inherent advantages such as very small size, hard environment tolerance and impact of electromagnetic fields. In this paper three different types of Intensity Fiber Optic Displacement Sensors (I-FODS) are presented. Three configurations of I-FODS were realized in two varieties. In the first one, the cleaved multimode optical fibers (MMF) were used to collect reflected light, while in the second variety the MMF ended with ball lenses were chosen. To ensure an accurate alignment of optical fibers in the sensor head the MTP C9730 optical fiber ferrules were used. In this paper the influence of distribution of transmitting and detecting optical fibers on sensitivity and linear range of operation of developed I-FODS were investigated. We have shown, that I-FODS with ball lenses receive average 10.5% more reflected power in comparison to the cleaved optical fibers and they increase linearity range of I-FODS by 33%. In this paper, an analysis of each type of the realized sensor and detailed discussion are given.
Lens-free all-fiber probe with an optimized output beam for optical coherence tomography.
Ding, Zhihua; Qiu, Jianrong; Shen, Yi; Chen, Zhiyan; Bao, Wen
2017-07-15
A high-efficiency lensless all-fiber probe for optical coherence tomography (OCT) is presented. The probe is composed of a segment of large-core multimode fiber (MMF), a segment of tapered MMF, and a length of single-mode fiber (SMF). A controllable output beam can be designed by a simple adjustment of its probe structure parameters (PSPs), instead of the selection of fibers with different optical parameters. A side-view probe with a diameter of 340 μm and a rigid length of 6.37 mm was fabricated, which provides an effective imaging range of ∼0.6 mm with a full width at half-maximum beam diameter of less than 30 μm. The insertion loss of the probe was measured to be 0.81 dB, ensuring a high sensitivity of 102.25 dB. Satisfactory images were obtained by the probe-based OCT system, demonstrating the feasibility of the probe for endoscopic OCT applications.
Gas and seismicity within the Istanbul seismic gap.
Géli, L; Henry, P; Grall, C; Tary, J-B; Lomax, A; Batsi, E; Riboulot, V; Cros, E; Gürbüz, C; Işık, S E; Sengör, A M C; Le Pichon, X; Ruffine, L; Dupré, S; Thomas, Y; Kalafat, D; Bayrakci, G; Coutellier, Q; Regnier, T; Westbrook, G; Saritas, H; Çifçi, G; Çağatay, M N; Özeren, M S; Görür, N; Tryon, M; Bohnhoff, M; Gasperini, L; Klingelhoefer, F; Scalabrin, C; Augustin, J-M; Embriaco, D; Marinaro, G; Frugoni, F; Monna, S; Etiope, G; Favali, P; Bécel, A
2018-05-01
Understanding micro-seismicity is a critical question for earthquake hazard assessment. Since the devastating earthquakes of Izmit and Duzce in 1999, the seismicity along the submerged section of North Anatolian Fault within the Sea of Marmara (comprising the "Istanbul seismic gap") has been extensively studied in order to infer its mechanical behaviour (creeping vs locked). So far, the seismicity has been interpreted only in terms of being tectonic-driven, although the Main Marmara Fault (MMF) is known to strike across multiple hydrocarbon gas sources. Here, we show that a large number of the aftershocks that followed the M 5.1 earthquake of July, 25 th 2011 in the western Sea of Marmara, occurred within a zone of gas overpressuring in the 1.5-5 km depth range, from where pressurized gas is expected to migrate along the MMF, up to the surface sediment layers. Hence, gas-related processes should also be considered for a complete interpretation of the micro-seismicity (~M < 3) within the Istanbul offshore domain.
75 FR 68636 - President's Working Group Report on Money Market Fund Reform
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-08
... investors in obtaining and analyzing information about MMF portfolios and risks, have larger amounts at... be submitted by any of the following methods: Electronic Comments Use the Commission's Internet... include File Number 4-619 on the subject line; or Use the Federal eRulemaking Portal ( http://www...
Sustainability: Land Management
2012-05-24
8217. .’" , .. . . . . Aqula Harbour , , MCB Quantico Notification Area MMF Legend Flight Tracks - FixedW1ng - Rot;wy Wing TBS :::_-, FIXed Wing Alea ...Rot;wy Wing Alea TBS Rotary Wing /Vea lmpuln Noise Buffer SMile APZ~l Range Safety Zone C Range Safety Zone A IZ2Zl Corr4losile Su1ace
Lupus Nephritis in Asia: Clinical Features and Management.
Yap, Desmond Y H; Chan, Tak Mao
2015-09-01
Lupus nephritis (LN) is a common and severe organ involvement manifesting itself in systemic lupus erythematosus (SLE). There is a considerable difference in prevalence, severity, treatment response and outcomes between Asian LN patients and LN patients from other racial backgrounds. Asian SLE patients have a higher prevalence of LN than Caucasian SLE patients and often present with a more severe disease. Increasing data from genetic studies, accompanied by progress in high-throughput genotyping, have advanced our knowledge about genetic predispositions that might partly contribute to the clinical variations observed. Corticosteroids combined with either cyclophosphamide (CYC) or mycophenolic acid (MPA) is the current standard-of-care induction regimen for severe LN irrespective of race or ethnicity. However, the preference for MPA or CYC, and possibly the optimum dose for MPA, is influenced by the patient's origin. Also, there is an insufficient evidence base for reduced-dose intravenous CYC in Asian patients. Health economics and access to prompt diagnosis and treatment are still challenging issues in some Asian regions. The former represents a significant obstacle limiting the access of patients to MPA despite the proven efficacy of the drug as an induction agent and its superiority over azathioprine (AZA) in preventing disease flares when used for long-term maintenance immunosuppression. Calcineurin inhibitors such as tacrolimus deserve further investigation in view of their additional effect on podocytes by reducing proteinuria and the promising data from Asian patients. Despite considerable advances in the clinical management of LN over the past few decades with resultant improvements in patients' outcomes, there are still knowledge gaps and unmet clinical needs. Asia has made substantial contributions to the evidence base that guides clinical management and continues to offer invaluable opportunities for research pursuits. Treatment responses and clinical outcomes in Asian patients with LN compare favorably with patients from other parts of the world. The prevention and treatment of infective complications remain significant challenges in managing LN in Asia. (1) The prevalence of SLE is lower among Caucasians than other ethnicities. A higher prevalence is observed among Asians and African Americans, while the highest prevalence is found in Caribbean people. The prevalence of LN in Asian SLE patients is much higher than in Caucasians as well. However, the 10-year renal outcome and renal survival rate appear to be better in Asians. (2) Polymorphisms of genes involved in the immune response, such as Fcγ receptor, integrin alpha M, TNF superfamily 4, myotubularin-related protein 3 and many others, might be partly responsible for the differences in prevalence between the different ethnic groups. European ancestry was shown to be associated with a decrease in the risk of LN even after adjustment for genes most associated with renal disease. (3) Access to health care is a key determinant of disease progression, treatment outcome and the management of complications such as infections, particularly in South Asia, and might also explain disparities between clinical outcomes. (4) The efficacy of low-dose CYC combined with corticosteroids for induction treatment of LN was proved in European Caucasian patients. This treatment is also used in Asia, although no formal evaluation of efficacy and safety in comparison with other treatment regimens exists in this population. The efficacy of mycophenolate mofetil (MMF) is similar to that of CYC, and similar between Asians and Caucasians. MMF may be more effective than CYC in inducing response in high-risk populations such as African American or Hispanic patients. MMF might cause less infection-related events in Asians, but its high cost prevents broader usage at present. (5) For maintenance therapy, corticosteroid combined with AZA or MMF is used worldwide, with a broadly similar efficacy of both treatments, although there are data suggesting that in high-risk populations (e.g. African Americans) MMF may be more effective in preventing renal flares. AZA is often preferred in Asia due to economic constraints and because of its safety in pregnancy. (6) Alternative therapies under investigation include rituximab, which might be more efficient in Caucasians, as well as belimumab. Recent Japanese and Chinese studies have indicated a potential benefit of tacrolimus as a substitute for or in addition to CYC or MMF (dual or triple immunosuppression). Mizoribine is used in Japan exclusively.
Lupus Nephritis in Asia: Clinical Features and Management
Yap, Desmond Y.H.; Chan, Tak Mao
2015-01-01
Background Lupus nephritis (LN) is a common and severe organ involvement manifesting itself in systemic lupus erythematosus (SLE). There is a considerable difference in prevalence, severity, treatment response and outcomes between Asian LN patients and LN patients from other racial backgrounds. Summary Asian SLE patients have a higher prevalence of LN than Caucasian SLE patients and often present with a more severe disease. Increasing data from genetic studies, accompanied by progress in high-throughput genotyping, have advanced our knowledge about genetic predispositions that might partly contribute to the clinical variations observed. Corticosteroids combined with either cyclophosphamide (CYC) or mycophenolic acid (MPA) is the current standard-of-care induction regimen for severe LN irrespective of race or ethnicity. However, the preference for MPA or CYC, and possibly the optimum dose for MPA, is influenced by the patient's origin. Also, there is an insufficient evidence base for reduced-dose intravenous CYC in Asian patients. Health economics and access to prompt diagnosis and treatment are still challenging issues in some Asian regions. The former represents a significant obstacle limiting the access of patients to MPA despite the proven efficacy of the drug as an induction agent and its superiority over azathioprine (AZA) in preventing disease flares when used for long-term maintenance immunosuppression. Calcineurin inhibitors such as tacrolimus deserve further investigation in view of their additional effect on podocytes by reducing proteinuria and the promising data from Asian patients. Despite considerable advances in the clinical management of LN over the past few decades with resultant improvements in patients' outcomes, there are still knowledge gaps and unmet clinical needs. Asia has made substantial contributions to the evidence base that guides clinical management and continues to offer invaluable opportunities for research pursuits. Key Messages Treatment responses and clinical outcomes in Asian patients with LN compare favorably with patients from other parts of the world. The prevention and treatment of infective complications remain significant challenges in managing LN in Asia. Facts from East and West (1) The prevalence of SLE is lower among Caucasians than other ethnicities. A higher prevalence is observed among Asians and African Americans, while the highest prevalence is found in Caribbean people. The prevalence of LN in Asian SLE patients is much higher than in Caucasians as well. However, the 10-year renal outcome and renal survival rate appear to be better in Asians. (2) Polymorphisms of genes involved in the immune response, such as Fcγ receptor, integrin alpha M, TNF superfamily 4, myotubularin-related protein 3 and many others, might be partly responsible for the differences in prevalence between the different ethnic groups. European ancestry was shown to be associated with a decrease in the risk of LN even after adjustment for genes most associated with renal disease. (3) Access to health care is a key determinant of disease progression, treatment outcome and the management of complications such as infections, particularly in South Asia, and might also explain disparities between clinical outcomes. (4) The efficacy of low-dose CYC combined with corticosteroids for induction treatment of LN was proved in European Caucasian patients. This treatment is also used in Asia, although no formal evaluation of efficacy and safety in comparison with other treatment regimens exists in this population. The efficacy of mycophenolate mofetil (MMF) is similar to that of CYC, and similar between Asians and Caucasians. MMF may be more effective than CYC in inducing response in high-risk populations such as African American or Hispanic patients. MMF might cause less infection-related events in Asians, but its high cost prevents broader usage at present. (5) For maintenance therapy, corticosteroid combined with AZA or MMF is used worldwide, with a broadly similar efficacy of both treatments, although there are data suggesting that in high-risk populations (e.g. African Americans) MMF may be more effective in preventing renal flares. AZA is often preferred in Asia due to economic constraints and because of its safety in pregnancy. (6) Alternative therapies under investigation include rituximab, which might be more efficient in Caucasians, as well as belimumab. Recent Japanese and Chinese studies have indicated a potential benefit of tacrolimus as a substitute for or in addition to CYC or MMF (dual or triple immunosuppression). Mizoribine is used in Japan exclusively. PMID:27536670
Intensity modulation photonic crystal fiber based refractometer in the visible wavelength range
NASA Astrophysics Data System (ADS)
Liu, Yun; Chen, Shimeng; Zhang, Xinpu; Gong, Zhenfeng; Peng, Wei
2014-11-01
A novel evanescent field refractometer based on a two-core photonic crystal fiber (TWPCF) sandwiched between multimode fibers(MMFs) is demonstrated. Through splicing a short piece of TWPCF between two MMFs, a simple structure and high sensitivity RI sensor can be constructed. Instead of using wavelength information as sensor signal, we focus more on the light intensity signal different from most PCF based RI sensor. The TWPCF section functions as a tailorable bridge between the excited high order modes and the surrounding refractive index (SRI). With a light filter inserting in the front of white light, the transmission spectrum of the light through the sensing region occurs in a welldefined wavelength bands. As a result, the peak power of the transmission light is tailored with the SRI perturbation via the MMF-TWPCF-MMF structure. The experiment result shows a quadratic relation between the light intensity and samples within RI range of 1.33-1.41 while a linear response can be achieved from the 1.33-1.35 which is a most used RI range for biologically sensing.
Optofluidic tuning of multimode interference fiber filters
NASA Astrophysics Data System (ADS)
Antonio-Lopez, J. E.; May-Arrioja, D. A.; LiKamWa, P.
2009-05-01
We report on the optofluidic tuning of MMI-based bandpass filters. It is well known that MMI devices exhibit their highest sensitivity when their diameter (D) is modified, since they have a D2 wavelength dependence. In order to increase the MMF diameter we use a special fiber, called No-Core fiber, which is basically a MMF with a diameter of 125 μm with air as the cover. Therefore, when this No-Core fiber is immersed in liquids with different refractive indexes, as a result of the Goes-Hänchen shift the effective width (fundamental mode width) of the No-Core fiber is increased, and thus the peak wavelength is tuned. A tunability of almost 40 nm in going from air (n=1.333) to ethylene glycol (n=1.434) was easily obtained, with a minimum change in peak transmission, contrast, and bandwidth. Moreover, since replacing the entire liquid can be difficult, the device was placed vertically and the liquid was covering the No-Core fiber in small steps. This provided similar amount of tuning as before, but a more controllable tuning mechanism.
Progressive outer retinal necrosis syndrome in the course of systemic lupus erythematosus.
Turno-Kręcicka, A; Tomczyk-Socha, M; Zimny, A
2016-12-01
Progressive outer retinal necrosis syndrome (PORN) is a severe clinical variant of necrotizing herpetic chorioretinitis, which occurs almost exclusively in patients with advanced acquired immunodeficiency syndrome (AIDS). To date, only a few cases of PORN have been reported in patients, mostly among those who were immunocompromised. To our knowledge, only one case of PORN in a patient with systemic lupus erythematosus (SLE) has been described. We report the case of a 44-year old HIV-negative patient with lupus nephritis, whom was being treated by mycophenolate mophetil (MMF), arechin and prednisone. After 14 months of MMF therapy, the patient revealed PORN symptoms; and several months later, the patient developed Type B primary central nervous system lymphoma (PCNSL). PORN is usually compared to acute retinal necrosis (ARN) syndrome, because of having the same causative agent: varicella zoster virus (VZV). There are also some similarities in clinical findings. Our observation supports the hypothesis that PORN symptoms in HIV-negative patients can be an intermediate form between ARN and PORN, and can vary according to the patient's immune status. © The Author(s) 2016.
Hisagi, Miwako; Shafer, Valerie L; Miyagawa, Shigeru; Kotek, Hadas; Sugawara, Ayaka; Pantazis, Dimitrios
2016-12-01
We examined discrimination of a second-language (L2) vowel duration contrast in English learners of Japanese (JP) with different amounts of experience using the magnetoencephalography mismatch field (MMF) component. Twelve L2 learners were tested before and after a second semester of college-level JP; half attended a regular rate course and half an accelerated course with more hours per week. Results showed no significant change in MMF for either the regular or accelerated learning group from beginning to end of the course. We also compared these groups against nine L2 learners who had completed four semesters of college-level JP. These 4-semester learners did not significantly differ from 2-semester learners, in that only a difference in hemisphere activation (interacting with time) between the two groups approached significance. These findings suggest that targeted training of L2 phonology may be necessary to allow for changes in processing of L2 speech contrasts at an early, automatic level. Copyright © 2016 Elsevier B.V. All rights reserved.
Mazzilli, Rossella; Cimadomo, Danilo; Vaiarelli, Alberto; Capalbo, Antonio; Dovere, Lisa; Alviggi, Erminia; Dusi, Ludovica; Foresta, Carlo; Lombardo, Francesco; Lenzi, Andrea; Tournaye, Herman; Alviggi, Carlo; Rienzi, Laura; Ubaldi, Filippo Maria
2017-12-01
To evaluate the impact of the male factor on the outcomes of intracytoplasmic sperm injection (ICSI) cycles combined with preimplantation genetic testing for aneuploidies (PGT-A). Observational longitudinal cohort study. Private in vitro fertilization (IVF) center. A total of 1,219 oocyte retrievals divided into five study groups according to sperm parameters: normozoospermia (N), moderate male factor (MMF), severe oligoasthenoteratozoospermia (OAT-S), obstructive azoospermia (OA), and nonobstructive azoospermia (NOA). ICSI with ejaculated/surgically retrieved sperm, blastocyst culture, trophectoderm-based quantitative polymerase chain reaction PGT-A, and frozen-warmed euploid embryo transfer (ET). The primary outcome measures were fertilization, blastocyst development, and euploidy rates; the secondary outcome measures were live birth and miscarriage rates. Perinatal and obstetrical outcomes were monitored as well. A total of 9,042 metaphase II oocytes were inseminated. The fertilization rate was significantly reduced in MMF, OAT-S, OA, and NOA compared with N (74.8%, 68.7%, 67.3%, and 53.1% vs. 77.2%). The blastocyst rate per fertilized oocyte was significantly reduced in MMF and NOA compared with N (48.6% and 40.6% vs. 49.3%). The timing of blastocyst development also was affected in OA and NOA. Logistic regression analysis adjusted for confounders highlighted NOA as a negative predictor of obtaining an euploid blastocyst per OPU (odds ratio 0.5). When the analysis was performed per obtained blastocyst, however, no correlation between male factor and euploidy rate was observed. Embryo transfers also resulted in similar live birth and miscarriage rates. No impact of sperm factor on obstetrical/perinatal outcomes was observed. Severe male factor impairs early embryonic competence in terms of fertilization rate and developmental potential. However, the euploidy rate and implantation potential of the obtained blastocysts are independent from sperm quality. Copyright © 2017 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.
Zhang, Daping; Renbarger, Jamie L; Chow, Diana S-L
2016-11-01
The aim of this study was to evaluate the pharmacokinetic variations of mycophenolic acid (MPA), the active metabolite of mycophenolate mofetil (MMF), in both pediatric and adult patients following hematopoietic stem cell transplantation (HSCT). Twenty pediatric patients with a median age of 3 years (range 0.2-12 years) and 13 adult patients with a median age of 54 years (range 18-63 years) were enrolled. Blood samples were collected on days 0, 7, 14, 21, and 30 after allogeneic HSCT. Total and free (unbound) MPA as well as MPA 7-O-glucuronide (MPAG) were quantified using a validated LC-MS/MS assay. The plasma protein binding of MPA and MPAG did not change significantly in pediatric patients over the 1-month sampling period post-HSCT. However, it increased in adult patients from day 7 to day 30 post-HSCT, from 97.3 ± 0.8% to 98.3 ± 0.6% for MPA (P < .05), and 74.6 ± 9.4% to 82.9 ± 8.1% for MPAG (P < .05). The plasma protein binding of MPA was significantly higher in males compared to females in both pediatric (98.3 ± 1.1% vs 97.4 ± 1.1%) and adult (98.1 ± 0.7% vs 97.4 ± 1.2%) patients (P < .05). The MPAG/MPA ratios on a milligram-per-kilogram dose basis in adult patients were significantly higher than those in pediatric patients (4.3 ± 3.4 vs 2.4 ± 2.6; P < .05). Time-dependent plasma protein binding and age-related differences in MPA metabolism at least in part impact the reported large intra- and interindividual variability in MPA pharmacokinetics. These patient and pharmacologic factors, if incorporated into MMF regimen design and modification, may contribute to the rational dose selection of MMF in HSCT patients. © 2016, The American College of Clinical Pharmacology.
NASA Astrophysics Data System (ADS)
Tegegne, Z. G.; Viana, C.; Polleux, J. L.; Grzeskowiak, M.; Richalot, E.
2016-03-01
This paper demonstrates the experimental study of edge and top illuminated SiGe phototransistors (HPT) implemented using the existing industrial SiGe2RF Telefunken GmbH BiCMOS technology for opto-microwave (OM) applications using 850nm Multi-Mode Fibers (MMF). Its technology and structure are described. Two different optical window size HPTs with top illumination (5x5μm2, 10x10μm2) and an edge illuminated HPTs having 5μm x5μm size are presented and compared. A two-step post fabrication process was used to create an optical access on the edge of the HPT for lateral illumination with a lensed MMF through simple polishing and dicing techniques. We perform Opto-microwave Scanning Near-field Optical Microscopy (OM-SNOM) analysis on edge and top illuminated HPTs in order to observe the fastest and the highest sensitive regions of the HPTs. This analysis also allows understanding the parasitic effect from the substrate, and thus draws a conclusion on the design aspect of SiGe/Si HPT. A low frequency OM responsivity of 0.45A/W and a cutoff frequency, f-3dB, of 890MHz were measured for edge illuminated HPT. Compared to the top illuminated HPT of the same size, the edge illuminated HPT improves the f-3dB by a factor of more than two and also improves the low frequency responsivity by a factor of more than four. These results demonstrate that a simple etched HPT is still enough to achieve performance improvements compared to the top illuminated HPT without requiring a complex coupling structure. Indeed, it also proves the potential of edge coupled SiGe HPT in the ultra-low-cost silicon based optoelectronics circuits with a new approach of the optical packaging and system integration to 850nm MMF.
NASA Astrophysics Data System (ADS)
Matrullo, Emanuela; Lengliné, Olivier; Schmittbuhl, Jean; Karabulut, Hayrullah; Bouchon, Michel
2017-04-01
The Main Marmara Fault (MMF) represents a 150 km un-ruptured segment of the North Anatolian Fault located below the Marmara Sea. It poses a significant hazard for the large cities surrounding the region and in particular for the megalopolis of Istanbul. The seismic activity has been continuously monitored since 2007 by various seismic networks. For this purpose it represents an extraordinary natural laboratory to study in details the whole seismicity bringing insights into the geometry of the faults systems at depth and mechanical properties at various space-time scales. Waveform similarity-based analysis is performed on the continuous recordings to construct a refined catalog of earthquakes from 2009 to 2014. High-resolution relocation was applied using the double-difference algorithm, using cross-correlation differential travel-time data. Seismic moment magnitudes (Mw) have been computed combining the inversion of earthquake S-wave displacement spectra for the larger events and the estimation of the relative size of multiplets using the singular value decomposition (SVD) thanks the highly coherent waveforms. The obtained catalog of seismicity includes more than 15,000 events. The seismicity strongly varying along the strike and depth exhibits a complex structure that confirms the segmentation of the fault with different mechanical behavior (Schmittbuhl et al., GGG, 2016). In the central part of the Marmara Sea, seismicity is poor and scattered. To the east, in the Cinarcick basin, along the MMF, the seismicity is mainly located around 8-15 km in depth, except at both ends of this basin where the seismicity extends vertically up to surface. In the Yalova and Gemlik region (to the east not on the MMF) the seismicity is distributed over a wide range of depth (from surface to 15 km deep) and is characterized by several clusters vertically elongated. The spatio-temporal evolution of earthquake sequences, which repeatedly occur in specific sub-areas, and the seismic moment release reveals mainly typically two kinds of seismicity dynamics: swarm like episodes and mainshock-aftershock sequences. Similar features in the seismicity distribution are observed to the west, in the Tekirdag and Central Basin. These preliminary evidences, combined with the recent analysis on several long-lasting strike-slip seismic repeaters occurring below the Central Basin (Schmittbuhl et al., GRL, 2016) indicate the presence of both locked and creeping portions of the MMF. In the light of the accurate and extensive observations, several open questions emerge: What are the mechanisms responsible of these repeating earthquakes and of the earthquake swarms? What is the influence and the role of fluids in the generation of seismicity.
Basu, Biswanath; Babu, Binu George; Bhattacharyya, Suman
Hypertriglyceridemia is common in children with systemic lupus erythematosus (SLE). A retrospective analysis of the baseline clinical-pathological presentation and treatment outcome (status of lipid profiles) was performed in two children with SLE, who presented with extreme hypertriglyceridemia over a follow-up period of four weeks. The children were treated with prednisolone, mycophenolate mofetil (MMF), hydroxychloroquine and hypolipidemic agents, depending on their disease status. On serial follow-up, the first child showed a significantly raised serum triglyceride level after receiving one week of oral prednisolone therapy. Anti-lipoprotein-lipase (LPL) autoantibody was absent. Lipid profile levels of this child gradually improved after replacing oral prednisolone with another immunosuppressant, namely MMF. The second child presented with extreme hypertriglyceridemia with positive anti-LPL autoantibody. She responded to plasmapheresis followed by increasing the dose of immunosuppressant. So, extreme hypertriglyceridemia in children with SLE may be steroid induced or due to presence of anti-LPL auto antibody. Management should be individualized depending on the etiology. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Reumatología y Colegio Mexicano de Reumatología. All rights reserved.
Eom, Jonghyun; Shin, Jun Geun; Park, Soongho; Rim, Sunghwan; Lee, Byeong Ha
2016-01-01
We propose an all-fiber-based dual-modal imaging system that combines noncontact photoacoustic tomography (PAT) and optical coherence tomography (OCT). The PAT remotely measures photoacoustic (PA) signals with a 1550-nm laser on the surface of a sample by utilizing a fiber interferometer as an ultrasound detector. The fiber-based OCT, employing a swept-source laser centered at 1310 nm, shares the sample arm of the PAT system. The fiber-optic probe for the combined system was homemade with a lensed single-mode fiber (SMF) and a large-core multimode fiber (MMF). The compact and robust common probe is capable of obtaining both the PA and the OCT signals at the same position without any physical contact. Additionally, the MMF of the probe delivers the short pulses of a Nd:YAG laser to efficiently excite the PA signals. We experimentally demonstrate the feasibility of the proposed dual-modal system with a phantom made of a fishing line and a black polyethylene terephthalate fiber in a tissue mimicking solution. The all-fiber-optic system, capable of providing complementary information about absorption and scattering, has a promising potential in minimally invasive and endoscopic imaging. PMID:27213392
Salt-and-pepper noise removal using modified mean filter and total variation minimization
NASA Astrophysics Data System (ADS)
Aghajarian, Mickael; McInroy, John E.; Wright, Cameron H. G.
2018-01-01
The search for effective noise removal algorithms is still a real challenge in the field of image processing. An efficient image denoising method is proposed for images that are corrupted by salt-and-pepper noise. Salt-and-pepper noise takes either the minimum or maximum intensity, so the proposed method restores the image by processing the pixels whose values are either 0 or 255 (assuming an 8-bit/pixel image). For low levels of noise corruption (less than or equal to 50% noise density), the method employs the modified mean filter (MMF), while for heavy noise corruption, noisy pixels values are replaced by the weighted average of the MMF and the total variation of corrupted pixels, which is minimized using convex optimization. Two fuzzy systems are used to determine the weights for taking average. To evaluate the performance of the algorithm, several test images with different noise levels are restored, and the results are quantitatively measured by peak signal-to-noise ratio and mean absolute error. The results show that the proposed scheme gives considerable noise suppression up to a noise density of 90%, while almost completely maintaining edges and fine details of the original image.
Kang, Eun Kyu; Lee, Yong Woo; Ravindran, Sooraj; Lee, Jun Ki; Choi, Hee Ju; Ju, Gun Wu; Min, Jung Wook; Song, Young Min; Sohn, Ik-Bu; Lee, Yong Tak
2016-05-16
We demonstrate an advanced structure for optical interconnect consisting of 4 channel × 10 Gb/s bidirectional optical subassembly (BOSA) formed using silicon optical bench (SiOB) with tapered fiber guiding holes (TFGHs) for precise and passive optical alignment of vertical-cavity surface-emitting laser (VCSEL)-to-multi mode fiber (MMF) and MMF-to-photodiode (PD). The co-planar waveguide (CPW) transmission line (Tline) was formed on the backside of silicon substrate to reduce the insertion loss of electrical data signal. The 4 channel VCSEL and PD array are attached at the end of CPW Tline using a flip-chip bonder and solder pad. The 12-channel ribbon fiber is simply inserted into the TFGHs of SiOB and is passively aligned to the VCSEL and PD in which no additional coupling optics are required. The fabricated BOSA shows high coupling efficiency and good performance with the clearly open eye patterns and a very low bit error rate of less than 10-12 order at a data rate of 10 Gb/s with a PRBS pattern of 231-1.
Eom, Jonghyun; Shin, Jun Geun; Park, Soongho; Rim, Sunghwan; Lee, Byeong Ha
2016-05-20
We propose an all-fiber-based dual-modal imaging system that combines noncontact photoacoustic tomography (PAT) and optical coherence tomography (OCT). The PAT remotely measures photoacoustic (PA) signals with a 1550-nm laser on the surface of a sample by utilizing a fiber interferometer as an ultrasound detector. The fiber-based OCT, employing a swept-source laser centered at 1310 nm, shares the sample arm of the PAT system. The fiber-optic probe for the combined system was homemade with a lensed single-mode fiber (SMF) and a large-core multimode fiber (MMF). The compact and robust common probe is capable of obtaining both the PA and the OCT signals at the same position without any physical contact. Additionally, the MMF of the probe delivers the short pulses of a Nd:YAG laser to efficiently excite the PA signals. We experimentally demonstrate the feasibility of the proposed dual-modal system with a phantom made of a fishing line and a black polyethylene terephthalate fiber in a tissue mimicking solution. The all-fiber-optic system, capable of providing complementary information about absorption and scattering, has a promising potential in minimally invasive and endoscopic imaging.
Volkmann, Elizabeth R; Tashkin, Donald P; Roth, Michael D; Clements, Philip J; Khanna, Dinesh; Furst, Daniel E; Mayes, Maureen; Charles, Julio; Tseng, Chi-Hong; Elashoff, Robert M; Assassi, Shervin
2016-12-30
Increased circulatory levels of the chemokine CXCL4 have been associated with the presence of interstitial lung disease (ILD) in an observational study of patients with systemic sclerosis (SSc). The purpose of the present study was to evaluate the relationship between baseline CXCL4 level and extent of ILD in the context of a randomized controlled trial and to determine whether changes in CXCL4 levels in response to immunosuppression are associated with future progression of SSc-ILD. A total of 142 SSc-ILD patients from Scleroderma Lung Study (SLS) II were randomized in a double-blind, parallel-arm trial, to receive mycophenolate (MMF) for 2 years or oral cyclophosphamide (CYC) for 1 year followed by 1 year of placebo. Plasma CXCL4 levels were measured at baseline, 12 months, and 24 months in SLS II participants (N = 136) and at a single time point in healthy controls (N = 67). A mixed-effects model evaluated the relationship between change in CXCL4 levels and SSc-ILD progression. The primary outcome was the course of the forced vital capacity. Baseline CXCL4 levels were significantly higher in SSc-ILD patients compared with healthy controls (2699 ± 1489 ng/ml vs 2233 ± 1351 ng/ml (mean ± SD); P = 0.019). However, no significant correlations were identified between CXCL4 levels and extent of ILD at baseline, as measured by the forced vital capacity, diffusing capacity of carbon monoxide, or radiographic extent of ILD. Plasma CXCL4 decreased significantly from baseline to 12 months in all patients (CYC: P < 0.001; MMF: P = 0.006) with no between-treatment differences (CYC vs MMF). Patients with the largest decline in CXCL4 levels during the first 12 months had an improved course of forced vital capacity %-predicted from 12 to 24 months (P = 0.040), even after adjusting for baseline disease severity and treatment arm assignment. Levels of CXCL4 were higher in patients with SSc-ILD compared with controls and decreased in all patients treated with immunosuppressive therapy. While CXCL4 levels were not correlated with extent of ILD at baseline, changes in CXCL4 at 12 months predicted future progression of SSc-ILD from 12 to 24 months. These findings suggest that intermediate-term changes in CXCL4 may have predictive significance for long-term progression of SSc-ILD in patients receiving immunosuppressive therapy. ClinicalTrials.gov NCT00883129 . Registered 16 April 2009.
A Comparison of Analytical and Experimental Data for a Magnetic Actuator
NASA Technical Reports Server (NTRS)
Groom, Nelson J.; Bloodgood, V. Dale, Jr.
2000-01-01
Theoretical and experimental force-displacement and force-current data are compared for two configurations of a simple horseshoe, or bipolar, magnetic actuator. One configuration utilizes permanent magnet wafers to provide a bias flux and the other configuration has no source of bias flux. The theoretical data are obtained from two analytical models of each configuration. One is an ideal analytical model which is developed under the following assumptions: (1) zero fringing and leakage flux, (2) zero actuator coil mmf loss, and (3) infinite permeability of the actuator core and suspended element flux return path. The other analytical model, called the extended model, is developed by adding loss and leakage factors to the ideal model. The values of the loss and leakage factors are calculated from experimental data. The experimental data are obtained from a magnetic actuator test fixture, which is described in detail. Results indicate that the ideal models for both configurations do not match the experimental data very well. However, except for the range around zero force, the extended models produce a good match. The best match is produced by the extended model of the configuration with permanent magnet flux bias.
NASA Astrophysics Data System (ADS)
Shi, Jin-Wei; Wei, Chia-Chien; Chen, Jyehong; Ledentsov, N. N.; Yang, Ying-Jay
2017-02-01
Vertical-cavity surface-emitting lasers (VCSELs) has become the most important light source in the booming market of short-reach (< 300 meters) optical interconnect (OI). The next generation OI has been targeted at 56 Gbit/sec data rate per channel (CEI-56G) with the total data rate up to 400 Gbit/sec. However, the serious modal dispersion of multi-mode fiber (MMF), limited speed of VCSEL, and its high resistance (> 150 Ω) seriously limits the >50 Gbit/sec linking distance (< 10 m) by using only on-off keying (OOK) modulation scheme without any signal processing techniques. In contrast to OOK, 4-PAM modulation format is attractive for >50 Gbit/sec transmission due to that it can save one-half of the required bandwidth. Nevertheless, a 4.7 dB optical power penalty and the linearity of transmitter would become issues in the 4-PAM linking performance. Besides, in the modern OI system, the optics transreceiver module must be packaged as close as possible with the integrated circuits (ICs). The heat generated from ICs will become an issue in speed of VSCEL. Here, we review our recent work about 850 nm VCSEL, which has unique Zn-diffusion/oxide-relief apertures and special p- doping active layer with strong wavelength detuning to further enhance its modulation speed and high-temperature (85°C) performances. Single-mode (SM) devices with high-speed ( 26 GHz), reasonable resistance ( 70 Ω) and moderate output power ( 1.5 mW) can be achieved. Error-free 54 Gbit/sec OOK transmission through 1km MMF has been realized by using such SM device with signal processing techniques. Besides, the volterra nonlinear equalizer has been applied in our 4-PAM 64 Gbit/sec transmission through 2-km OM4 MMF, which significantly enhance the linearity of device and outperforms fed forward equalization (FFE) technique. Record high bit-rate distance product of 128.km is confirmed for optical-interconnect applications.
Ochocińska, Agnieszka; Jarmużek, Wioletta; Janas, Roman
2018-04-23
Concentration of soluble urokinase receptor (suPAR) was regarded as viable marker to differentiate the focal segmental glomerulosclerosis (FSGS) from other glomerulopathies and also as predictive parameter for progression of renal disease. The aim of this study was to evaluate serum and urine (s)(u)suPAR concentration in steroid-sensitive and steroid-resistant nephrotic children treated with different (double and triple-drug) regimens. Overall 43 children were evaluated including 14 patients with steroid-resistant nephrotic syndrome (SRNS) aged 9±6 years and 29 with steroid-sensitive nephrotic syndrome (SSNS) aged 9±5 years, as well as control group (n=59). The concentration of suPAR was measured with ELISA kit (R∧D Systems Inc.). There was no difference in serum suPAR level between SRNS (6404, range: 4613-9575 pg/mL) and SSNS (5745, range: 4666-8246 pg/mL) patients, and also in urinary suPAR: SRNS (2877, range: 847- 19121 pg/mL) and SSNS (2854, range: 328-7434 pg/mL), respectively. There was no statistically significant difference in serum biomarker concentrations between patients with severe course of the disease, in combination therapy, with three drugs: CsA + MMF + Pred (5968, range: 4613-9575 pg/mL) in comparison with patients receiving double therapy: CsA + Pred or MMF + Pred (5449, range: 4666-6623 pg/mL, 5905, range: 5102-6730 pg/mL, respectively). SuPAR concentration in the urine of patients treated with Pred + MMF was lower (1493, range: 328-4444 pg/mL) than in patients receiving Pred + CsA (3193, range: 629-7434 pg/mL), as well as lower than in patients with triple combination of drugs (3318, range: 448-5570 pg/mL), however the difference was not statistically significant. Serum and urine concentration of suPAR did not different between different clinical patterns of nephrotic syndrome in children, regardless the immunosuppressive treatment used. © 2018 MEDPRESS.
Haasova, Marcela; Snowsill, Tristan; Jones-Hughes, Tracey; Crathorne, Louise; Cooper, Chris; Varley-Campbell, Jo; Mujica-Mota, Ruben; Coelho, Helen; Huxley, Nicola; Lowe, Jenny; Dudley, Jan; Marks, Stephen; Hyde, Chris; Bond, Mary; Anderson, Rob
2016-01-01
BACKGROUND End-stage renal disease is a long-term irreversible decline in kidney function requiring kidney transplantation, haemodialysis or peritoneal dialysis. The preferred option is kidney transplantation followed by induction and maintenance immunosuppressive therapy to reduce the risk of kidney rejection and prolong graft survival. OBJECTIVES To systematically review and update the evidence for the clinical effectiveness and cost-effectiveness of basiliximab (BAS) (Simulect,(®) Novartis Pharmaceuticals) and rabbit antihuman thymocyte immunoglobulin (Thymoglobuline,(®) Sanofi) as induction therapy and immediate-release tacrolimus [Adoport(®) (Sandoz); Capexion(®) (Mylan); Modigraf(®) (Astellas Pharma); Perixis(®) (Accord Healthcare); Prograf(®) (Astellas Pharma); Tacni(®) (Teva); Vivadex(®) (Dexcel Pharma)], prolonged-release tacrolimus (Advagraf,(®) Astellas Pharma); belatacept (BEL) (Nulojix,(®) Bristol-Myers Squibb), mycophenolate mofetil (MMF) [Arzip(®) (Zentiva), CellCept(®) (Roche Products), Myfenax(®) (Teva), generic MMF is manufactured by Accord Healthcare, Actavis, Arrow Pharmaceuticals, Dr Reddy's Laboratories, Mylan, Sandoz and Wockhardt], mycophenolate sodium, sirolimus (Rapamune,(®) Pfizer) and everolimus (Certican,(®) Novartis Pharmaceuticals) as maintenance therapy in children and adolescents undergoing renal transplantation. DATA SOURCES Clinical effectiveness searches were conducted to 7 January 2015 in MEDLINE (via Ovid), EMBASE (via Ovid), Cochrane Central Register of Controlled Trials (via Wiley Online Library) and Web of Science [via Institute for Scientific Information (ISI)], Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects and Health Technology Assessment (HTA) (The Cochrane Library via Wiley Online Library) and Health Management Information Consortium (via Ovid). Cost-effectiveness searches were conducted to 15 January 2015 using a costs or economic literature search filter in MEDLINE (via Ovid), EMBASE (via Ovid), NHS Economic Evaluation Databases (via Wiley Online Library), Web of Science (via ISI), Health Economic Evaluations Database (via Wiley Online Library) and EconLit (via EBSCOhost). REVIEW METHODS Titles and abstracts were screened according to predefined inclusion criteria, as were full texts of identified studies. Included studies were extracted and quality appraised. Data were meta-analysed when appropriate. A new discrete time state transition economic model (semi-Markov) was developed; graft function, and incidences of acute rejection and new-onset diabetes mellitus were used to extrapolate graft survival. Recipients were assumed to be in one of three health states: functioning graft, graft loss or death. RESULTS Three randomised controlled trials (RCTs) and four non-RCTs were included. The RCTs only evaluated BAS and tacrolimus (TAC). No statistically significant differences in key outcomes were found between BAS and placebo/no induction. Statistically significantly higher graft function (p < 0.01) and less biopsy-proven acute rejection (odds ratio 0.29, 95% confidence interval 0.15 to 0.57) was found between TAC and ciclosporin (CSA). Only one cost-effectiveness study was identified, which informed NICE guidance TA99. BAS [with TAC and azathioprine (AZA)] was predicted to be cost-effective at £20,000-30,000 per quality-adjusted life year (QALY) versus no induction (BAS was dominant). BAS (with CSA and MMF) was not predicted to be cost-effective at £20,000-30,000 per QALY versus no induction (BAS was dominated). TAC (with AZA) was predicted to be cost-effective at £20,000-30,000 per QALY versus CSA (TAC was dominant). A model based on adult evidence suggests that at a cost-effectiveness threshold of £20,000-30,000 per QALY, BAS and TAC are cost-effective in all considered combinations; MMF was also cost-effective with CSA but not TAC. LIMITATIONS The RCT evidence is very limited; analyses comparing all interventions need to rely on adult evidence. CONCLUSIONS TAC is likely to be cost-effective (vs. CSA, in combination with AZA) at £20,000-30,000 per QALY. Analysis based on one RCT found BAS to be dominant, but analysis based on another RCT found BAS to be dominated. BAS plus TAC and AZA was predicted to be cost-effective at £20,000-30,000 per QALY when all regimens were compared using extrapolated adult evidence. High-quality primary effectiveness research is needed. The UK Renal Registry could form the basis for a prospective primary study. STUDY REGISTRATION This study is registered as PROSPERO CRD42014013544. FUNDING The National Institute for Health Research HTA programme. PMID:27557331
Haasova, Marcela; Snowsill, Tristan; Jones-Hughes, Tracey; Crathorne, Louise; Cooper, Chris; Varley-Campbell, Jo; Mujica-Mota, Ruben; Coelho, Helen; Huxley, Nicola; Lowe, Jenny; Dudley, Jan; Marks, Stephen; Hyde, Chris; Bond, Mary; Anderson, Rob
2016-08-01
End-stage renal disease is a long-term irreversible decline in kidney function requiring kidney transplantation, haemodialysis or peritoneal dialysis. The preferred option is kidney transplantation followed by induction and maintenance immunosuppressive therapy to reduce the risk of kidney rejection and prolong graft survival. To systematically review and update the evidence for the clinical effectiveness and cost-effectiveness of basiliximab (BAS) (Simulect,(®) Novartis Pharmaceuticals) and rabbit antihuman thymocyte immunoglobulin (Thymoglobuline,(®) Sanofi) as induction therapy and immediate-release tacrolimus [Adoport(®) (Sandoz); Capexion(®) (Mylan); Modigraf(®) (Astellas Pharma); Perixis(®) (Accord Healthcare); Prograf(®) (Astellas Pharma); Tacni(®) (Teva); Vivadex(®) (Dexcel Pharma)], prolonged-release tacrolimus (Advagraf,(®) Astellas Pharma); belatacept (BEL) (Nulojix,(®) Bristol-Myers Squibb), mycophenolate mofetil (MMF) [Arzip(®) (Zentiva), CellCept(®) (Roche Products), Myfenax(®) (Teva), generic MMF is manufactured by Accord Healthcare, Actavis, Arrow Pharmaceuticals, Dr Reddy's Laboratories, Mylan, Sandoz and Wockhardt], mycophenolate sodium, sirolimus (Rapamune,(®) Pfizer) and everolimus (Certican,(®) Novartis Pharmaceuticals) as maintenance therapy in children and adolescents undergoing renal transplantation. Clinical effectiveness searches were conducted to 7 January 2015 in MEDLINE (via Ovid), EMBASE (via Ovid), Cochrane Central Register of Controlled Trials (via Wiley Online Library) and Web of Science [via Institute for Scientific Information (ISI)], Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects and Health Technology Assessment (HTA) (The Cochrane Library via Wiley Online Library) and Health Management Information Consortium (via Ovid). Cost-effectiveness searches were conducted to 15 January 2015 using a costs or economic literature search filter in MEDLINE (via Ovid), EMBASE (via Ovid), NHS Economic Evaluation Databases (via Wiley Online Library), Web of Science (via ISI), Health Economic Evaluations Database (via Wiley Online Library) and EconLit (via EBSCOhost). Titles and abstracts were screened according to predefined inclusion criteria, as were full texts of identified studies. Included studies were extracted and quality appraised. Data were meta-analysed when appropriate. A new discrete time state transition economic model (semi-Markov) was developed; graft function, and incidences of acute rejection and new-onset diabetes mellitus were used to extrapolate graft survival. Recipients were assumed to be in one of three health states: functioning graft, graft loss or death. Three randomised controlled trials (RCTs) and four non-RCTs were included. The RCTs only evaluated BAS and tacrolimus (TAC). No statistically significant differences in key outcomes were found between BAS and placebo/no induction. Statistically significantly higher graft function (p < 0.01) and less biopsy-proven acute rejection (odds ratio 0.29, 95% confidence interval 0.15 to 0.57) was found between TAC and ciclosporin (CSA). Only one cost-effectiveness study was identified, which informed NICE guidance TA99. BAS [with TAC and azathioprine (AZA)] was predicted to be cost-effective at £20,000-30,000 per quality-adjusted life year (QALY) versus no induction (BAS was dominant). BAS (with CSA and MMF) was not predicted to be cost-effective at £20,000-30,000 per QALY versus no induction (BAS was dominated). TAC (with AZA) was predicted to be cost-effective at £20,000-30,000 per QALY versus CSA (TAC was dominant). A model based on adult evidence suggests that at a cost-effectiveness threshold of £20,000-30,000 per QALY, BAS and TAC are cost-effective in all considered combinations; MMF was also cost-effective with CSA but not TAC. The RCT evidence is very limited; analyses comparing all interventions need to rely on adult evidence. TAC is likely to be cost-effective (vs. CSA, in combination with AZA) at £20,000-30,000 per QALY. Analysis based on one RCT found BAS to be dominant, but analysis based on another RCT found BAS to be dominated. BAS plus TAC and AZA was predicted to be cost-effective at £20,000-30,000 per QALY when all regimens were compared using extrapolated adult evidence. High-quality primary effectiveness research is needed. The UK Renal Registry could form the basis for a prospective primary study. This study is registered as PROSPERO CRD42014013544. The National Institute for Health Research HTA programme.
Zhang, J; Wang, X; Wu, R-H; Zhuang, Q-W; Gu, Q P; Meng, J
2015-01-01
This retrospective study evaluated the efficacy of a 2.3 mm locking plate/screw system compared with a 2.0-mm non-locking plate/screw system in fixation of isolated non comminuted mandibular condyle fractures. Surgical records of 101 patients who received either a 2.3 mm locking plate (group A, n = 51) or 2.0 mm non locking plate (group B, n = 50) were analyzed. All patients were followed up to a minimum of 6 months postoperatively and evaluated for hardware related complications, occlusal stability, need for and duration of MMF and mandibular functional results. Four complications occurred in the locking group and eighteen in the non locking group with complication rates equalling 8% and 36% respectively. When comparing the overall results according to plates used, the χ2 test showed a statistically significant difference between the locking and non locking plates (p < 0.001). Fewer patients required postoperative MMF in group A. Mandibular condyle fractures treated with a 2.3 mm locking plate exhibited stable osteosynthesis, were associated with minimal complications and resulted in acceptable mandibular range of motion compared with a 2.0 mm non locking plate.
Mostafa, M. G.; Zhu, Bo; Cran, Marlene; Dow, Noel; Milne, Nicholas; Desai, Dilip
2017-01-01
Meat rendering operations produce stick water waste which is rich in proteins, fats, and minerals. Membrane distillation (MD) may further recover water and valuable solids, but hydrophobic membranes are contaminated by the fats. Here, commercial hydrophobic polytetrafluorethylene (PTFE) membranes with a hydrophilic polyurethane surface layer (PU-PTFE) are used for the first time for direct contact MD (DCMD) on real poultry, fish, and bovine stick waters. Metal membrane microfiltration (MMF) was also used to capture fats prior to MD. Although the standard hydrophobic PTFE membranes failed rapidly, PU-PTFE membranes effectively processed all stick water samples to colourless permeate with sodium rejections >99%. Initial clean solution fluxes 5–6 L/m2/h declined to less than half during short 40% water recovery tests for all stick water samples. Fish stick water uniquely showed reduced fouling and up to 78% water recovery. Lost flux was easily restored by rinsing the membrane with clean water. MMF prior to MD removed 92% of fats, facilitating superior MD performance. Differences in fouling between stick waters were attributed to temperature polarisation from higher melt temperature fats and relative proportions to proteins. Hydrophilic coated MD membranes are applicable to stick water processing but further studies should consider membrane cleaning and longer-term stability. PMID:28961203
Ford, Talitha C; Woods, Will; Crewther, David P
2017-01-01
Social Disorganisation (SD) is a shared autistic and schizotypal phenotype that is present in the subclinical population. Auditory processing deficits, particularly in mismatch negativity/field (MMN/F) have been reported across both spectrum disorders. This study investigates differences in MMN/F cortical spatio-temporal source activity between higher and lower quintiles of the SD spectrum. Sixteen low (9 female) and 19 high (9 female) SD subclinical adults (18-40years) underwent magnetoencephalography (MEG) during an MMF paradigm where standard tones (50ms) were interrupted by infrequent duration deviants (100ms). Spatio-temporal source cluster analysis with permutation testing revealed no difference between the groups in source activation to the standard tone. To the deviant tone however, there was significantly reduced right hemisphere fronto-temporal and insular cortex activation for the high SD group ( p = 0.038). The MMF, as a product of the cortical response to the deviant minus that to the standard, did not differ significantly between the high and low Social Disorganisation groups. These data demonstrate a deficit in right fronto-temporal processing of an auditory change for those with more of the shared SD phenotype, indicating that right fronto-temporal auditory processing may be associated with psychosocial functioning.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhou Ren-Lai; Ren Jian-Cun; Lou Shu-Li
2015-07-31
Broadband supercontinuum (SC) generation in a telecommunication fibre [8/125-μm single mode fibre (SMF) and 50/125-μm multimode fibre (MMF)] directly pumped by a nanosecond Q-switched Tm, Ho:YVO{sub 4} laser is demonstrated. At a 7-kHz pulse repetition frequency (PRF), an output average power of 0.53 W in the 1.95 – 2.5-μm spectral band and 3.51 W in the 1.9 – 2.6-μm spectral band are achieved in SMF and MMF, respectively (the corresponding optic-to-optic conversion efficiencies are 34.6% and 73.7%). The output spectra have extremely high flat segments in the range 2070 – 2390 nm and 2070 – 2475 nm with negligible intensitymore » variation (less than 2%). The SC average power is scalable from 2.1 to 4.2 W by increasing the PRF from 5 to 15 kHz, while maintaining pump power. Compared with the input pump pulse, the output SC pulse width is broadened, and no split is found. The stability of the output SC power has been monitored for a week and the fluctuations being less than 6%. (control of radiation parameters)« less
NASA Astrophysics Data System (ADS)
Kolodny, Michael A.
2017-05-01
Today's battlefield space is extremely complex, dealing with an enemy that is neither well-defined nor well-understood. Adversaries are comprised of widely-distributed, loosely-networked groups engaging in nefarious activities. Situational understanding is needed by decision makers; understanding of adversarial capabilities and intent is essential. Information needed at any time is dependent on the mission/task at hand. Information sources potentially providing mission-relevant information are disparate and numerous; they include sensors, social networks, fusion engines, internet, etc. Management of these multi-dimensional informational sources is critical. This paper will present a new approach being undertaken to answer the challenge of enhancing battlefield understanding by optimizing the utilization of available informational sources (means) to required missions/tasks as well as determining the "goodness'" of the information acquired in meeting the capabilities needed. Requirements are usually expressed in terms of a presumed technology solution (e.g., imagery). A metaphor of the "magic rabbits" was conceived to remove presumed technology solutions from requirements by claiming the "required" technology is obsolete. Instead, intelligent "magic rabbits" are used to provide needed information. The question then becomes: "WHAT INFORMATION DO YOU NEED THE RABBITS TO PROVIDE YOU?" This paper will describe a new approach called Mission-Informed Needed Information - Discoverable, Available Sensing Sources (MINI-DASS) that designs a process that builds information acquisition missions and determines what the "magic rabbits" need to provide in a manner that is machine understandable. Also described is the Missions and Means Framework (MMF) model used, the process flow utilized, the approach to developing an ontology of information source means and the approach for determining the value of the information acquired.
Chopade, Shakuntala Santosh; Dhaneshwar, Suneela Sunil
2018-01-01
AIM To design colon-targeted codrugs of mycophenolic acid (MPA) and aminosugars as a safer option to mycophenolate mofetil (MMF) in the management of inflammatory bowel disease. METHODS Codrugs were synthesized by coupling MPA with aminosugars (D-glucosamine and D-galactosamine) using EDCI coupling. The structures were confirmed by infrared radiation, nuclear magnetic resonance, mass spectroscopy and elemental analysis. The release profile of codrugs was extensively studied in aqueous buffers, upper gastrointestinal homogenates, faecal matter and caecal homogenates (in vitro) and rat blood (in vitro). Anti-colitic activity was assessed in 2,4,6-trinitrobezenesulfonic acid-induced colitis in Wistar rats by the estimation of various demarcating parameters. Statistical evaluation was performed by applying one-way and two-way ANOVA when compared with the disease control. RESULTS The prodrugs resisted activation in HCl buffer (pH 1.2) and stomach homogenates of rats with negligible hydrolysis in phosphate buffer (pH 7.4) and intestinal homogenates. Incubation with colon homogenates (in vitro) produced 76% to 89% release of MPA emphasizing colon-specific activation of codrugs and the release of MPA and aminosugars at the site of action. In the in vitro studies, the prodrug of MPA with D-glucosamine (MGLS) was selected which resulted in 68% release of MPA in blood. in vitro studies on MGLS revealed its colon-specific activation after a lag time of 8 h which could be ascribed to the hydrolytic action of N-acyl amidases found in the colon. The synthesized codrugs markedly diminished disease activity score and revived the disrupted architecture of the colon that was comparable to MMF but superior to MPA. CONCLUSION The significant attenuating effect of prodrugs and individual aminosugars on colonic inflammation proved that the rationale of the codrug approach is valid. PMID:29563754
Gonzalez-Martínez, F; Orihuela, S; Orihuela, N; Manzo, L; Nuñez, N; Nin, M
2014-11-01
According to our experience, survival of cadaveric renal graft in 5 years increased from 63% as of the introduction of cyclosporine to 73% after azathioprine was substituted with mycophenolate mofetil (MMF) in 1997. Until 2003, the innovator mycophenolate mofetil (IMMF) (Cellcept; Roche) was used. In 2003, Laboratorios Clausen introduced in Uruguay a generic MMF (GMMF) (Suprimun/Micoflavin/Myclausen; Laboratorios Clausen) with previous bioequivalence studies. Since then, every health care provider administers one of these types of MMF available on the market to its renal transplant (RT) patients. We compared the evolution of 2 groups of patients and their grafts, those treated with GMMF or with IMMF. This was a descriptive, retrospective, nonrandomized, comparative study that involved all transplant patients in a center from January 2005 to June 2010 from 2 different health care providers which administered GMMF or IMMF uninterruptedly. Patients were older than 18 years, underwent their first RT and received triple immunosuppressive regime with calcineurin inhibitor (CNI), corticoids, and MMF, and completed ≥6 months of post-RT evolution. The GMMF group included 29 patients and the IMMF group 23. Patients from both groups had no significant differences (NS) regarding age, sex, diabetes, hepatitis C virus (HCV), recipient hypertension, donor type (living or cadaveric, sex, age, cause of death), or mismatch degree. There were no material differences regarding antibody induction, CNI type, day of diuresis, or function recovery percentage. Statistically different results were reported for time in dialysis (6.1 ± 0.7 y in IMMF vs 3.8 ± 0.5 y in GMMF) and cadaveric donor cold ischemia time (989 ± 205 min vs 851 ± 219 min, respectively). For IMMF and GMMF, respectively, clinical acute rejection was 40.9% and 31% and creatinine over 3, 6, 12, 24, 36, and 48 months, respectively, was (mg%): 1.65 ± 0.12, 1.66 ± 0.15, 1.43 ± 0.10, 1.44 ± 0.12, 1.49 ± 0.18, and 1.41 ± 0.17 and 1.50 ± 0.08, 1.41 ± 0.07, 1.63 ± 0.26, 1.31 ± 0.08, 1.26 ± 0.09, and 1.21 ± 0.10, with 22/28, 22/28, 22/28, 22/26, 19/20, 17/11, and 15/9 patients under follow-up (NS). Patient survival over 3, 6, 12, and 18 months, respectively, was 94%, 94%, 94%, and 94% and 96%, 96%, 96%, and 96%, and graft survival was 94%, 89%, 89%, and 89% and 96%, 93%, 93%, and 93% for IMMF and GMMF, respectively (NS). Dosing adjustment frequency and substitution with mycophenolate sodium was similar for both groups. With the results of this preliminary study we can not reach any final conclusion regarding assistance practice. From both groups, which involved similar baseline variables except for time in dialysis and cold ischemia (both greater in IMMF), we could gather a similar graft and patient evolution. New prospective, randomized, double-blind studies involving an adequate number of patients will help to determine the efficacy of GMMF in renal transplantation.
Determination of Seismic Activity on the Main Marmara Fault with GPS Measurements
NASA Astrophysics Data System (ADS)
Alkan, M. N.; Alkan, R. M.; Yavaşoğlu, H.; Köse, Z.; Aladoğan, K.; Özbey, V.
2017-12-01
The tectonic plates that creates the Earth have always been an important topic to work on for Geosciences. Plate motion affecting the Earth's crust have occurred for millions of years. This slow but continuous movement that has been going on for millions of years can only be followed by instrumental measurements. In recent years, this process has been done with GPS very accurately. The North Anatolian Fault (NAF) is a major right-lateral, strike-slip fault that extends more than 1200 km extends along all North Anatolia from Bingol to Saros Gulf. The NAFZ is divided into Southern and Northern Branches to the east of Marmara region that several destructive earthquakes occurred, such as Izmit (in 1999, Mw=7.4) and Duzce (in 1999, Mw=7.2) in the last century. MMF (Main Marmara Fault) which is the part of the Northern Branch in the Marmara Sea, starting in from the Gulf of Izmit-Adapazarı and reaching the Gulf of Saros. The determination of the deformation accumulated on the MMF has become extremely important especially after the 1999 Izmit earthquake. According to the recent studies, the MMF is the largest unbroken part of the fault and is divided into segments. These segments are Cinarcik, Prince Island, Central Marmara and Tekirdag. Recent studies have demonstrated that the Prince Island segment is fully locked. However, studies that are focused on the Central Marmara segment, that is located offshore Istanbul, a giant metropole that has more than 14 million populations, do not conclude about the presence of a seismic gap, capable of generating a big earthquake. Therefore, in the scope of this study, a new GPS network was established at short and long distance from the Main Marmara Fault, to densify the existing GPS network. 3 campaign GPS measurements were done in 2015, 2016, 2017. The evaluation of the datasets were done by GAMIT/GLOBK software. For the evaluation, 30 continuous observation stations, 14 stations connected to the IGS network and 16 stations connected to the local networks CORS-TR and ISKI-UKBS, and 18 campaign stations that located in the study area were used. The evaluation was made between 12-26 August for each year and thus intended to determine the kinematics of the Main Marmara Fault.
1999-12-01
GENERATION AIRCRAFT CARRIER (CVNX) 6. AUTHOR(S) Watt, Michael R. 5. FUNDING NUMBERS Contract Number 7. PERFORMING ORGANIZATION NAME(S) AND...ADDRESS(ES) Naval Postgraduate School Monterey, CA 93943-5000 PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING / MONITORING AGENCY NAME(S) AND... ORGANIZATION OF STUDY 5 H. BACKGROUND INFORMATION 9 A. CURRENT MILITARY USERS OF MOBILE FACILITIES 10 1. United States Marine Corps (USMC) 11 2
Evaluation Plan for the Gateway 2000 Demonstration Project
1990-02-01
February 1990 United States Army Research Institute for the Behavioral and Social Sciences App’oved for publk -e2:ic ; distribution is unlimited. o_ M...mf( U.S. ARMY RESEARCH INSTITUTE FOR THE BEHAVIORAL AND SOCIAL SCIENCES A Field Operating Agency Under the Jurisdiction of the Deputy Chief of...Behavioral and Social Sciences. NOTE: The views, opinions, and findings in this report are those of the author(s) and should not be construed as an official
Long-term exposure to diesel engine exhaust induced lung function decline in a cross sectional study
ZHANG, Li Ping; ZHANG, Xiao; DUAN, Hua Wei; MENG, Tao; NIU, Yong; HUANG, Chuan Feng; GAO, Wei Min; YU, Shan Fa; ZHENG, Yu Xin
2016-01-01
To clarify the effects of lung function following exposure to diesel engine exhaust (DEE), we recruited 137 diesel engine testing workers exposed to DEE and 127 non-DEE-exposed workers as study subjects. We performed lung function tests and measured cytokinesis-block micronucleus (CBMN) cytome index and levels of urinary polycyclic aromatic hydrocarbons (PAHs) metabolites. There was a significant decrease of forced expiratory volume in 1 second (FEV1), ratio of forced expiratory volume in 1 second to forced vital capacity (FEV1/ FVC), maximal mid expiratory flow curve (MMF), forced expiratory flow at 50% of FVC (FEF50%), and forced expiratory flow at 75% of FVC (FEF75%) in the DEE-exposed workers than non-DEE-exposed workers (all p<0.05). Among all study subjects, the decreases of FEF75% were associated with the increasing levels of PAHs metabolites (p<0.05), and there were negative correlations between FEV1, FEV1/FVC, MMF, FEF50%, and FEF75% with CBMN cytome index (all p<0.05). Our results show that long-term exposure to DEE can induce lung function decline which shows mainly obstructive changes and influence of small airways function. The decreased lung function is associated with internal dosage of DEE exposure, and accompany with the increasing CBMN cytome index. PMID:27334424
Flannigan, Kyle L; Rajbar, Taylor; Moffat, Andrew; McKenzie, Leanna S; Dicke, Frank; Rioux, Kevin; Workentine, Matthew L; Louie, Thomas J; Hirota, Simon A; Greenway, Steven C
2017-01-01
The microbiome is increasingly recognized as an important influence on human health and many of the comorbidities that affect patients after solid organ transplantation (SOT) have been shown to involve changes in gut bacterial populations. Thus, microbiome changes in an individual patient may have important health implications after SOT but this area remains understudied. We describe changes in the composition of the fecal microbiome from a pediatric heart transplant recipient before and >2.5 years after he underwent repeated fecal microbiota transplantation (FMT) for recurrent Clostridium difficile infection (CDI). With both documented episodes of CDI, there was marked loss of bacterial diversity with overgrowth of Proteobacteria (>98.9% of phyla identified) associated with symptomatic colitis that was corrected after FMT. We hypothesize that a second CDI occurring after FMT was related to incomplete restoration of normal bowel flora post-FMT with relative deficiencies of the phyla Firmicutes and Bacteroidetes and the families Lachnospiraceae and Ruminococcaceae . Following the second FMT, there was a gradual shift in gut bacterial composition coincident with the recipient developing lymphonodular hyperplasia of the colon and painless hematochezia that resolved with discontinuation of mycophenolate mofetil (MMF). This case documents dynamic changes in the bacterial microbiome after FMT and suggests that MMF may influence the gut microbiome with consequences for the patient.
Global Atmosphere Watch Workshop on Measurement-Model ...
The World Meteorological Organization’s (WMO) Global Atmosphere Watch (GAW) Programme coordinates high-quality observations of atmospheric composition from global to local scales with the aim to drive high-quality and high-impact science while co-producing a new generation of products and services. In line with this vision, GAW’s Scientific Advisory Group for Total Atmospheric Deposition (SAG-TAD) has a mandate to produce global maps of wet, dry and total atmospheric deposition for important atmospheric chemicals to enable research into biogeochemical cycles and assessments of ecosystem and human health effects. The most suitable scientific approach for this activity is the emerging technique of measurement-model fusion for total atmospheric deposition. This technique requires global-scale measurements of atmospheric trace gases, particles, precipitation composition and precipitation depth, as well as predictions of the same from global/regional chemical transport models. The fusion of measurement and model results requires data assimilation and mapping techniques. The objective of the GAW Workshop on Measurement-Model Fusion for Global Total Atmospheric Deposition (MMF-GTAD), an initiative of the SAG-TAD, was to review the state-of-the-science and explore the feasibility and methodology of producing, on a routine retrospective basis, global maps of atmospheric gas and aerosol concentrations as well as wet, dry and total deposition via measurement-model
Targeting Autophagy in the Tumor Stroma to Eradicate Breast Cancer
2013-09-01
initiated. One potential caveat that has arisen is that fibroblast specific protein (FSP) may be expressed at low levels in late stage PyMT tumor...digestion solution per 5g of tumor tissue) 1.5 mg/ml Collagenase (from 100X stock solution) 125 U/ml Hyaluronidase (from 100X stock solution) MMF media...g. Determine the latency period to the onset of primary tumor formation and metastasis for recipient mice generated in subtask 1f. At selected
2001-12-01
850 nm. The layers are grown by molecular beam epitaxy . The AlGaAs–GaAs inter- faces are alloy-graded for 30 nm to eliminate charge trapping that may... beam of the VCSELs allow for easy coupling of light into the MMF, it is also desirable to have photodetectors with large active windows compatible with... VCSEL )emitting at 850 nm [1] have become the preferred source for high-speed short-wavelength communication systems. These VCSELs are particularly
Light Scattering by Fractal Dust Aggregates. II. Opacity and Asymmetry Parameter
NASA Astrophysics Data System (ADS)
Tazaki, Ryo; Tanaka, Hidekazu
2018-06-01
Optical properties of dust aggregates are important at various astrophysical environments. To find a reliable approximation method for optical properties of dust aggregates, we calculate the opacity and the asymmetry parameter of dust aggregates by using a rigorous numerical method, the T-Matrix Method, and then the results are compared to those obtained by approximate methods: the Rayleigh–Gans–Debye (RGD) theory, the effective medium theory (EMT), and the distribution of hollow spheres method (DHS). First of all, we confirm that the RGD theory breaks down when multiple scattering is important. In addition, we find that both EMT and DHS fail to reproduce the optical properties of dust aggregates with fractal dimensions of 2 when the incident wavelength is shorter than the aggregate radius. In order to solve these problems, we test the mean field theory (MFT), where multiple scattering can be taken into account. We show that the extinction opacity of dust aggregates can be well reproduced by MFT. However, it is also shown that MFT is not able to reproduce the scattering and absorption opacities when multiple scattering is important. We successfully resolve this weak point of MFT, by newly developing a modified mean field theory (MMF). Hence, we conclude that MMF can be a useful tool to investigate radiative transfer properties of various astrophysical environments. We also point out an enhancement of the absorption opacity of dust aggregates in the Rayleigh domain, which would be important to explain the large millimeter-wave opacity inferred from observations of protoplanetary disks.
Pei, Miao; Zhu, Xiangyu; Huang, Xiaojia
2018-01-05
Effective extraction is a key step in the determination of sulfonylurea herbicides (SUHs) in complicated samples. According to the chemical properties of SUHs, a new monolithic adsorbent utilizing acrylamidophenylboronic acid and vinylimidazole as mixed functional monomers was synthesized. The new adsorbent was employed as the extraction phase of multiple monolithic fiber solid-phase microextraction (MMF-SPME) of SUHs, and the extracted SUHs were determined by high-performance liquid chromatography with diode array detection (HPLC-DAD). Results well evidence that the prepared adsorbent could extract SUHs in environmental waters and soil effectively through multiply interactions such as boronate affinity, dipole-dipole and π-π interactions. Under the optimized extraction conditions, the limits of detection for target SUHs in environmental water and soil samples were 0.018-0.17μg/L and 0.14-1.23μg/kg, respectively. At the same time, the developed method also displayed some analytical merits including wide linear dynamic ranges, good method reproducibility, satisfactory sensitivity and low consume of organic solvent. Finally, the developed were successfully applied to monitor trace SUHs in environmental water and soil samples. The recoveries at three fortified concentrations were in the range of 70.6-119% with RSD below 11% in all cases. The obtained results well demonstrate the excellent practical applicability of the developed MMF-SPME-HPLC-DAD method for the monitoring of SUHs in water and soil samples. Copyright © 2017 Elsevier B.V. All rights reserved.
Two Types of Magnetic Flux Cancellation in the Solar Eruption of 2007 May 20
NASA Technical Reports Server (NTRS)
Sterlin, Alphonse C.; Moore, Ronald L.; Mason, Helen
2010-01-01
We study a solar eruption of 2007 May 20, in an effort to understand the cause of the eruption's onset. The event produced a GOES class B6.7 flare peaking at 05:56 UT, while ejecting a surge/filament and producing a coronal mass ejection (CME). We examine several data sets, including H-alpha images from the Solar Optical Telescope (SOT) on Hinode, EUV images from TRACE, and line-of-sight magnetograms from SOHO/MDI. Flux cancelation occurs among two different sets of flux elements inside of the erupting active region: First, for several days prior to eruption, opposite-polarity sunspot groups inside the region move toward each other, leading to the cancelation of approximately 10^{21} Mx of flux over three days. Second, within hours prior to the eruption, positive-polarity moving magnetic features (MMFs) flowing out of the positive-flux spots at approximately 1 kilometer per second repeatedly cancel with field inside a patch of negative-polarity flux located north of the sunspots. The filament erupts as a surge whose base is rooted in the location where the MMF cancelation occurs, while during the eruption that filament flows out along the polarity inversion line between the converging spot groups. We conclude that a plausible scenario is that the converging spot fields brought the magnetic region to the brink of instability, and the MMF cancelation pushed the system "over the edge." triggering the eruption.
Rawat, Rahul; Mwangi, Edina M.; Tesfaye, Roman; Abebe, Yewelsew; Baker, Jean; Frongillo, Edward A.; Ruel, Marie T.; Menon, Purnima
2016-01-01
Optimal breastfeeding (BF) practices in Ethiopia are far below the government’s targets, and complementary feeding practices are poor. The Alive & Thrive initiative aimed to improve infant and young child feeding (IYCF) practices through large-scale implementation of social and behavior change communication interventions in four regions of Ethiopia. The study assessed the effects of the interventions on IYCF practices and anthropometry over time in two regions–Southern Nations, Nationalities and Peoples Region and Tigray. A pre- and post-intervention adequacy evaluation design was used; repeated cross-sectional surveys of households with children aged 0–23.9 mo (n = 1481 and n = 1494) and with children aged 24–59.9 mo (n = 1481 and n = 1475) were conducted at baseline (2010) and endline (2014), respectively. Differences in outcomes over time were estimated using regression models, accounting for clustering and covariates. Plausibility analyses included tracing recall of key messages and promoted foods and dose-response analyses. We observed improvements in most WHO-recommended IYCF indicators. Early BF initiation and exclusive BF increased by 13.7 and 9.4 percentage points (pp), respectively. Differences for timely introduction of complementary foods, minimum dietary diversity (MDD), minimum meal frequency (MMF), minimum acceptable diet (MAD), and consumption of iron-rich foods were 22.2, 3.3, 26.2, 3.5, and 2.7 pp, respectively. Timely introduction and intake of foods promoted by the interventions improved significantly, but anthropometric outcomes did not. We also observed a dose-response association between health post visits and early initiation of BF (OR: 1.8); higher numbers of home visits by community volunteers and key messages recalled were associated with 1.8–4.4 times greater odds of achieving MDD, MMF, and MAD, and higher numbers of radio spots heard were associated with 3 times greater odds of achieving MDD and MAD. The interventions were associated with plausible improvements in IYCF practices, but large gaps in improving children’s diets in Ethiopia remain, particularly during complementary feeding. PMID:27755586
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sandmaier, B M.; Bethge, W A.; Wilbur, D. Scott
To lower treatment-related mortality and toxicity of conventional marrow transplantation, a nonmyeloablative regimen using 200 cGy total-body irradiation (TBI) and mycophenolate mofetil (MMF) combined with cyclosporine (CSP) for postgrafting immunosuppression was developed. To circumvent possible toxic effects of external- beam gamma irradiation, strategies for targeted radiation therapy were investigated. We tested whether the short-lived (46 minutes) alpha-emitter Bi-213 conjugated to an anti-CD45 monoclonal antibody (mAb) could replace 200 cGy TBI and selectively target hematopoietic tissues in a canine model of nonmyeloablative DLA-identical marrow transplantation. Biodistribution studies using iodine 123-labeled anti-CD45 mAb showed uptake in blood, marrow, lymph nodes, spleen, andmore » liver. In a dose-escalation study, 7 dogs treated with the Bi-213-anti-CD45 conjugate (Bi-213 dose, 0.1-5.9 mCi/kg[3.7-218 MBq/kg]) without marrow grafts had no toxic effects other than a mild, reversible suppression of blood counts. On the basis of these studies, 3 dogs were treated with 0.5 mg/kg Bi-213-labeled anti-CD45 mAb (Bi-213 doses, 3.6, 4.6, and 8.8 mCi/kg[133, 170, and 326 MBq/kg]) given in 6 injections 3 and 2 days before grafting of marrow from DLA-identical littermates. The dogs also received MMF (10 mg/kg subcutaneously twice daily the day of transplantation until day 27 afterward) and CSP (15 mg/kg orally twice daily the day before transplantation until 35 days afterward). Therapy was well tolerated except for transient elevations in levels of transaminases in 3 dogs, followed by, in one dog, ascites. All dogs achieved prompt engraftment and stable mixed hematopoietic chimerism, with donor contributions ranging from 30% to 70% after more than 27 weeks of follow-up. These results form the basis for additional studies in animals and the design of clinical trials using Bi-213 as a nonmyeloablative conditioning regimen with minimal toxicity.« less
García Covarrubias, L; Rossano García, A; Cicero Lebrija, A; Luque Hernández, A; Hinojosa Heredia, H; Fernández Ángel, D; Córdova, J; García Covarrubias, A; Bautista Olayo, R; Diliz Perez, H S
2013-05-01
With a population of >112 million persons, all Mexicans are entitled to receive medical care by the state and more than half have limited access to healthcare. From January 1985 to March 2009, 40 renal transplants were performed from living donors with a high percentage of complications. In April 2009, a new Solid Organ Transplantation Program was started; herein, we present this enterprise to the international community and briefly present a perspective on the Mexican transplant situation. We performed a retrospective chart review of kidney and liver transplant recipients from April 2009 to November 2011, including demographic features, immunosuppression, complications as well as initial and 1 month function. We performed 68 kidney (59 living and 9 deceased donors) and 5 liver transplants (cadaveric donors). The kidney transplant recipients were 73.5% males and showed an overall mean age of 29.77 years (range, 18-60). The donor mean age was 34.08 years. Mean recipient creatinine pretransplant was 13.32 mg/dL, while at day 5 it was 2.33 and at month one, 1.32 mg/dL. Five grafts were lost (7.3%): 4 due to death with a functioning graft and 1 due to acute pyelonephritis. Five patients experienced delayed graft function Basiliximab induction was required in all but one who received thymoglobulin owing to a high panel reactive antibody. Maintenance therapy included a calcineurin inhibitor, mycophenolate mofetil (MMF), and prednisone. Liver transplant recipients were 83.6% women. The etiologies were alcoholic cirrhosis (n = 2), primary billiary cirrhosis (n = 1) and hepatitis C virus infection (n = 2). Complications included: reperfusion syndrome (n = 1), convulsive crisis (medication; n = 1), acute respiratory distress syndrome (n = 1), and death (n = 1). Their Model for End-Stage Liver Disease scopes were 10-21. After basiliximab induction, they had maintenance therapy with tacrolimus, MMF, and steroids. The donor mean age was 26.2 years. All survivors show normal liver function tests currently. From 1985 to 2009, 40 kidney transplants were performed, with multiple complications including donor deaths. Our current results were comparable to international standards, with <15% complication rate. Copyright © 2013 Elsevier Inc. All rights reserved.
Forecasting Device Effectiveness. Volume 2. Procedures
1985-06-01
about individual tasks is used to sup- port the fotul ratings. DEFT III. At this level of analysis, the analyst uses 11 rating scales to estimate...real world or are they sust’ined at unreal levels in the training environment? The third scale r3tes how much practice the trainee will have in the...real world ’ I., F. MIMflMfl MM/ MMPMMIMMHrnMN MHIMMIMIHMN/fMhMMM flMhlMlflMMfMM l!"MMt~MWfl l o 20 1) 40 5(0 6() 70 8O 9.’ 1, ,, 0 = None; the
TruneČka, P; Klempnauer, J; Bechstein, W O; Pirenne, J; Friman, S; Zhao, A; Isoniemi, H; Rostaing, L; Settmacher, U; Mönch, C; Brown, M; Undre, N; Tisone, G
2015-07-01
DIAMOND: multicenter, 24-week, randomized trial investigating the effect of different once-daily, prolonged-release tacrolimus dosing regimens on renal function after de novo liver transplantation. Arm 1: prolonged-release tacrolimus (initial dose 0.2mg/kg/day); Arm 2: prolonged-release tacrolimus (0.15-0.175mg/kg/day) plus basiliximab; Arm 3: prolonged-release tacrolimus (0.2mg/kg/day delayed until Day 5) plus basiliximab. All patients received MMF plus a bolus of corticosteroid (no maintenance steroids). eGFR (MDRD4) at Week 24. Secondary endpoints: composite efficacy failure, BCAR and AEs. Baseline characteristics were comparable. Tacrolimus trough levels were readily achieved posttransplant; initially lower in Arm 2 versus 1 with delayed initiation in Arm 3. eGFR (MDRD4) was higher in Arms 2 and 3 versus 1 (p = 0.001, p = 0.047). Kaplan-Meier estimates of composite efficacy failure-free survival were 72.0%, 77.6%, 73.9% in Arms 1-3. BCAR incidence was significantly lower in Arm 2 versus 1 and 3 (p = 0.016, p = 0.039). AEs were comparable. Prolonged-release tacrolimus (0.15-0.175mg/kg/day) immediately posttransplant plus basiliximab and MMF (without maintenance corticosteroids) was associated with lower tacrolimus exposure, and significantly reduced renal function impairment and BCAR incidence versus prolonged-release tacrolimus (0.2mg/kg/day) administered immediately posttransplant. Delayed higher-dose prolonged-release tacrolimus initiation significantly reduced renal function impairment compared with immediate posttransplant administration, but BCAR incidence was comparable. © 2015 The Authors. American Journal of Transplantation published by Wiley Periodicals Inc.
Focusing attention on objects of interest using multiple matched filters.
Stough, T M; Brodley, C E
2001-01-01
In order to be of use to scientists, large image databases need to be analyzed to create a catalog of the objects of interest. One approach is to apply a multiple tiered search algorithm that uses reduction techniques of increasing computational complexity to select the desired objects from the database. The first tier of this type of algorithm, often called a focus of attention (FOA) algorithm, selects candidate regions from the image data and passes them to the next tier of the algorithm. In this paper we present a new approach to FOA that employs multiple matched filters (MMF), one for each object prototype, to detect the regions of interest. The MMFs are formed using k-means clustering on a set of image patches identified by domain experts as positive examples of objects of interest. An innovation of the approach is to radically reduce the dimensionality of the feature space, used by the k-means algorithm, by taking block averages (spoiling) the sample image patches. The process of spoiling is analyzed and its applicability to other domains is discussed. The combination of the output of the MMFs is achieved through the projection of the detections back into an empty image and then thresholding. This research was motivated by the need to detect small volcanos in the Magellan probe data from Venus. An empirical evaluation of the approach illustrates that a combination of the MMF plus the average filter results in a higher likelihood of 100% detection of the objects of interest at a lower false positive rate than a single matched filter alone.
Review of animal/in vitro data on biological effects of man-made fibers.
Ellouk, S A; Jaurand, M C
1994-06-01
This paper reviews the investigations with man-made fibers (MMF). Insulation woods: glasswool (GW), rockwool (RW), slagwool (SW), glass microfibers (GMF), glass filaments (GFiI), and refractory ceramic fibers (RCF) have been used in experimental animals and in in vitro cell systems. A large heterogeneous number of fibers, methods of fiber preparation, size selection, aerosolization, fiber size, and fiber burden measurement were noted, rendering difficult a comparison between results. By inhalation, RCF and asbestos used as positive controls produced a significant tumor increase. In some studies, a low tumor yield was found after inhalation of insulation wools; when all inhalation data were gathered, a significant tumor increase was found with GW. However, it is difficult to draw definitive conclusions on the potential of other fiber types because, in addition to the different compositions of the fibers, differences in fiber number and sizes existed, especially in comparison with asbestos. Moreover, experiments using inoculation, especially by the intraperitoneal route revealed a carcinogenic potential of all fibers types but GFiI and SW. In these two groups a small number of animals has been investigated and the fiber characteristics were sometimes irrelevant. So far, a relationship between the carcinogenic potency and fiber dimensions has been established. Other fiber parameters may be of importance (surface chemistry, biopersistence, fiber structure, for example) but further investigations are necessary to determine the correlations between these parameters and tumor incidence. In vitro experiments have emphasized the fiber characteristics identified in vivo as playing a role in the carcinogenic potency and should be developed as a better approach of the mechanistic effects of MMF.
NASA Astrophysics Data System (ADS)
Xu, Xueping; Han, Qinkai; Chu, Fulei
2018-03-01
The electromagnetic vibration of electrical machines with an eccentric rotor has been extensively investigated. However, magnetic saturation was often neglected. Moreover, the rub impact between the rotor and stator is inevitable when the amplitude of the rotor vibration exceeds the air-gap. This paper aims to propose a general electromagnetic excitation model for electrical machines. First, a general model which takes the magnetic saturation and rub impact into consideration is proposed and validated by the finite element method and reference. The dynamic equations of a Jeffcott rotor system with electromagnetic excitation and mass imbalance are presented. Then, the effects of pole-pair number and rubbing parameters on vibration amplitude are studied and approaches restraining the amplitude are put forward. Finally, the influences of mass eccentricity, resultant magnetomotive force (MMF), stiffness coefficient, damping coefficient, contact stiffness and friction coefficient on the stability of the rotor system are investigated through the Floquet theory, respectively. The amplitude jumping phenomenon is observed in a synchronous generator for different pole-pair numbers. The changes of design parameters can alter the stability states of the rotor system and the range of parameter values forms the zone of stability, which lays helpful suggestions for the design and application of the electrical machines.
Kervella, Delphine; Scharbarg, Emeric; Mahot-Moreau, Pascale; Renaudin, Karine; Branchereau, Julien; Karam, Georges; Chaillous, Lucy; Bach, Kalyane; Cantarovich, Diego
2018-05-09
Recurrence of type 1 diabetes mellitus (T1DM) is not frequent following pancreas transplantation and is generally considered to cause irreversible allograft failure despite rescue traitement 1 .A 35-year-old woman experienced severe hyperglycaemia (>5 g/L) 6 years following a simultaneous pancreas and kidney (SPK) transplantation. Immunosuppressive treatment included induction with anti-thymocyte globuline (ATG) followed by a steroid-free regimen and a combination of tacrolimus and mycophenolate mofetil (MMF). This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.
Jensen, Jesper Bevensee; Rodes, Roberto; Caballero, Antonio; Yu, Xianbin; Gibbon, Timothy Braidwood; Monroy, Idelfonso Tafur
2009-09-14
We present experimental demonstrations of in-building impulse radio (IR) ultra-wideband (UWB) link consisting of 100 m multi mode fiber (MMF) and 4 m wireless transmission at a record 4 Gbps, and a record 8 m wireless transmission at 2.5 Gbps. A directly modulated vertical cavity surface emitting laser (VCSEL) was used for the generation of the optical signal. 8 m at 2.5 Gbps corresponds to a bit rate--distance product of 20; the highest yet reported for wireless IR-UWB transmission.
Tedesco-Silva, Helio; Szakaly, Peter; Shoker, Ahmed; Sommerer, Claudia; Yoshimura, Norio; Schena, Francesco Paolo; Cremer, Malika; Hmissi, Abdel; Mayer, Hartmut; Lang, Philippe
2007-10-15
FTY720 is a novel immunomodulator that was developed to produce optimal graft protection with improved safety and tolerability. Phase II studies have demonstrated the efficacy of FTY720 up to the doses of 2.5 mg with full-dose cyclosporine (FDC). This multicenter, double-blind, Phase IIb, randomized study evaluated the safety and efficacy of 5 mg FTY720 (n=87; Group 1) vs. 2.5 mg FTY720 (n=90; Group 2) vs. mycophenolate mofetil (MMF; n=94; Group 3) in de novo renal transplant patients receiving FDC and prednisone. The primary efficacy endpoint was the occurrence of treated biopsy-proven acute rejection, graft loss, death, or premature study discontinuation (composite endpoint) within 6 months. The primary endpoint was superior in Group 1 (24%) and statistically noninferior in Group 2 compared to Group 3 (24.1% vs. 29.2% vs. 39.4%; P=0.025 and 0.0039, respectively). FTY720 plus FDC was generally well tolerated, with a similar incidence of adverse events across all groups. FTY720 was associated with higher incidence of bradycardia (Group 1: 26.4%, P=0.0002 and Group 2: 15.6%, P=0.046, vs. Group 3: 6.4%), respiratory disorders (Group 1: 40.2%, not significant [P=NS] and Group 2: 34.4%, P=NS vs. Group 3: 28.7%). One macular edema occurred in Group 2. Lower creatinine clearances were observed with FTY720 versus MMF (Group 1: 52.4 ml/min, P=NS and Group 2: 51.7 ml/min, P=0.039 vs. Group 3: 62.5 ml/min). Although FTY720 with FDC provided adequate protection from acute rejection the safety profile was less favorable for adverse events than current standard immunosuppression in de novo renal transplant patients.
Fasting and postprandial lipid response to the consumption of modified milk fats by guinea pigs.
Asselin, Geneviève; Lavigne, Charles; Bergeron, Nathalie; Angers, Paul; Belkacemi, Khaled; Arul, Joseph; Jacques, Hélène
2004-10-01
The objective of the present study was to investigate the effect of three modified milk fats with different melting profiles on fasting and postprandial lipid responses and on fecal fat content in guinea pigs. We hypothesized that the consumption of modified milk fat with a high m.p. results in reduced fasting and postprandial lipid responses compared with that of modified milk fat fractions with lower m.p. To test this hypothesis, male Hartley guinea pigs were fed isoenergetic diets containing 110 g of fat/kg, either from one of the three modified milk fats with high (HMF), medium (MMF), or low melting profiles (LMF), or from one of the two reference fats as whole milk fat (MF) or a fat blend similar to that of nonhydrogenated soft margarine (MA) for 28 d. Food intake (P < 0.05) and body weight gain (P < 0.05) were reduced in the animals fed the HMF diet compared with the other groups. In the fasting state, plasma LDL cholesterol was highest in animals fed the LMF diet, intermediary in those fed the MMF and MF diets, and lowest in those fed the HMF and MA diets (P< 0.05). Postprandially, the areas under the 0- to 3-h curves for the changes in plasma TG were lower in the HMF group than in the MA- and LMF-fed guinea pigs (P< 0.05). The fecal fat content was higher (P< 0.05) in the HMF group compared to the other milk fat groups. The present results suggest that modified milk fats can impact food intake, body weight gain, fasting cholesterolemia, and postprandial triglyceridemia, and these changes may be attributed to an altered fat absorption.
Khanna, Dinesh; Albera, Carlo; Fischer, Aryeh; Khalidi, Nader; Raghu, Ganesh; Chung, Lorinda; Chen, Dan; Schiopu, Elena; Tagliaferri, Margit; Seibold, James R; Gorina, Eduard
2016-09-01
Systemic sclerosis-associated interstitial lung disease (SSc-ILD) shares a number of clinical features and pathogenic mechanisms with idiopathic pulmonary fibrosis (IPF). This study was designed to evaluate the tolerability of the IPF treatment pirfenidone in SSc-ILD. The known gastrointestinal, skin, and liver adverse events (AE) of pirfenidone are of importance given the involvement of these organs in SSc. All patients received pirfenidone and were randomized 1:1 to either a 2- or 4-week titration starting at 801 mg/day and finishing at a maintenance dose of 2403 mg/day. Patients received pirfenidone for 16 weeks in total. Assessments included treatment-emergent AE (TEAE) and exploratory disease outcomes. Sixty-three patients were randomized; 96.8% experienced a TEAE and more patients reported TEAE during the titration versus the maintenance period. The most commonly reported TEAE were consistent with those observed for pirfenidone in IPF (nausea, headache, fatigue) and were similar regardless of titration schedule. More patients discontinued treatment because of TEAE in the 2- versus 4-week titration group (5 vs 1, respectively); all discontinuation events occurred > 3 weeks after reaching the full dose of pirfenidone. Mycophenolate mofetil (MMF), taken by 63.5% of patients in addition to pirfenidone, did not appear to affect tolerability. Exploratory disease outcomes remained largely unchanged. Pirfenidone showed an acceptable tolerability profile in SSc-ILD, although a longer titration may be associated with better tolerability. Tolerability was not affected by concomitant MMF. The present findings support further investigation of pirfenidone in future clinical trials in patients with SSc-ILD. ClinicalTrials.gov; www.clinicaltrials.gov NCT01933334.
Baseline immunosuppression is associated with histological findings in early protocol biopsies.
Moreso, Francesc; Serón, Daniel; Carrera, Marta; Gil-Vernet, Salvador; Cruzado, Josep M; Hueso, Miguel; Fulladosa, Xavier; Ramos, Rosa; Ibernon, Meritxell; Castelao, Alberto M; Grinyó, Josep M
2004-10-15
Protocol biopsies performed in stable renal allografts show different degrees of acute and chronic lesions that have been related with graft outcome. However, the utility of protocol biopsies to manage baseline immunosuppression has not been well characterized. We performed a case-control study to compare histological lesions observed in protocol biopsies in 49 patients treated with tacrolimus (TAC), mycophenolate mofetil (MMF), and prednisone to 49 patients treated with cyclosporine Neoral (CsA), MMF, and prednisone. Histological lesions were graded according to 1997 Banff criteria. The analysis was done according to an intention-to-treat basis. Patients treated with TAC displayed in the protocol biopsy a lower acute score (0.61+/-1.01 vs. 1.26+/-1.45; P=0.0115) and a similar chronic score (1.57+/-1.97 vs. 1.51+/-1.59; P=NS). Transplant glomerulopathy was also lower in TAC treated patients (0.02+/-0.14 vs. 0.20+/-0.41; P=0.0037). Univariate and multivariate logistic regression analysis showed that the presence of acute inflammation was associated with tacrolimus treatment (relative risk [RR]: 0.30, 95% confidence interval [CI]: 0.11-0.84; P=0.0211) and the time of biopsy (RR per month: 0.56, 95% CI: 0.32-0.97; P=0.0394). The presence of chronic lesions was only associated with serum creatinine at the time of biopsy (RR: 1.01, 95% CI: 1.00-1.02; P=0.0439). The incidence of inflammatory lesions and transplant glomerulopathy is lower in patients treated with TAC than in patients treated with CsA. These data suggest that baseline immunosuppression could influence the severity of histological lesions in stable grafts.
Abu El-Asrar, Ahmed M; Dosari, Mona; Hemachandran, Suhail; Gikandi, Priscilla W; Al-Muammar, Abdulrahman
2017-02-01
To evaluate the effectiveness and safety of mycophenolate mofetil (MMF) as first-line therapy combined with systemic corticosteroids in initial-onset acute uveitis associated with Vogt-Koyanagi-Harada (VKH) disease. This prospective study included 38 patients (76 eyes). The main outcome measures were final visual acuity, corticosteroid-sparing effect, progression to chronic recurrent granulomatous uveitis and development of complications, particularly 'sunset glow fundus'. The mean follow-up period was 37.0 ± 29.3 (range 9-120 months). Visual acuity of 20/20 was achieved by 93.4% of the eyes. Corticosteroid-sparing effect was achieved in all patients. The mean interval between starting treatment and tapering to 10 mg or less daily was 3.8 ± 1.3 months (range 3-7 months). Twenty-two patients (57.9%) discontinued treatment without relapse of inflammation. The mean time observed off of treatment was 28.1 ± 19.6 months (range 1-60 months). None of the eyes progressed to chronic recurrent granulomatous uveitis. The ocular complications encountered were glaucoma in two eyes (2.6%) and cataract in five eyes (6.6%). None of the eyes developed 'sunset glow fundus', and none of the patients developed any systemic adverse events associated with the treatment. Use of MMF as first-line therapy combined with systemic corticosteroids in patients with initial-onset acute VKH disease prevents progression to chronic recurrent granulomatous inflammation and development of 'sunset glow fundus'. © 2016 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.
Review of animal/in vitro data on biological effects of man-made fibers.
Ellouk, S A; Jaurand, M C
1994-01-01
This paper reviews the investigations with man-made fibers (MMF). Insulation woods: glasswool (GW), rockwool (RW), slagwool (SW), glass microfibers (GMF), glass filaments (GFiI), and refractory ceramic fibers (RCF) have been used in experimental animals and in in vitro cell systems. A large heterogeneous number of fibers, methods of fiber preparation, size selection, aerosolization, fiber size, and fiber burden measurement were noted, rendering difficult a comparison between results. By inhalation, RCF and asbestos used as positive controls produced a significant tumor increase. In some studies, a low tumor yield was found after inhalation of insulation wools; when all inhalation data were gathered, a significant tumor increase was found with GW. However, it is difficult to draw definitive conclusions on the potential of other fiber types because, in addition to the different compositions of the fibers, differences in fiber number and sizes existed, especially in comparison with asbestos. Moreover, experiments using inoculation, especially by the intraperitoneal route revealed a carcinogenic potential of all fibers types but GFiI and SW. In these two groups a small number of animals has been investigated and the fiber characteristics were sometimes irrelevant. So far, a relationship between the carcinogenic potency and fiber dimensions has been established. Other fiber parameters may be of importance (surface chemistry, biopersistence, fiber structure, for example) but further investigations are necessary to determine the correlations between these parameters and tumor incidence. In vitro experiments have emphasized the fiber characteristics identified in vivo as playing a role in the carcinogenic potency and should be developed as a better approach of the mechanistic effects of MMF. PMID:7925187
Biopersistence and Brain Translocation of Aluminum Adjuvants of Vaccines
Gherardi, Romain Kroum; Eidi, Housam; Crépeaux, Guillemette; Authier, François Jerome; Cadusseau, Josette
2015-01-01
Aluminum oxyhydroxide (alum) is a crystalline compound widely used as an immunological adjuvant of vaccines. Concerns linked to the use of alum particles emerged following recognition of their causative role in the so-called macrophagic myofasciitis (MMF) lesion detected in patients with myalgic encephalomyelitis/chronic fatigue/syndrome. MMF revealed an unexpectedly long-lasting biopersistence of alum within immune cells in presumably susceptible individuals, stressing the previous fundamental misconception of its biodisposition. We previously showed that poorly biodegradable aluminum-coated particles injected into muscle are promptly phagocytosed in muscle and the draining lymph nodes, and can disseminate within phagocytic cells throughout the body and slowly accumulate in brain. This strongly suggests that long-term adjuvant biopersistence within phagocytic cells is a prerequisite for slow brain translocation and delayed neurotoxicity. The understanding of basic mechanisms of particle biopersistence and brain translocation represents a major health challenge, since it could help to define susceptibility factors to develop chronic neurotoxic damage. Biopersistence of alum may be linked to its lysosome-destabilizing effect, which is likely due to direct crystal-induced rupture of phagolysosomal membranes. Macrophages that continuously perceive foreign particles in their cytosol will likely reiterate, with variable interindividual efficiency, a dedicated form of autophagy (xenophagy) until they dispose of alien materials. Successful compartmentalization of particles within double membrane autophagosomes and subsequent fusion with repaired and re-acidified lysosomes will expose alum to lysosomal acidic pH, the sole factor that can solubilize alum particles. Brain translocation of alum particles is linked to a Trojan horse mechanism previously described for infectious particles (HIV, HCV), that obeys to CCL2, signaling the major inflammatory monocyte chemoattractant. PMID:25699008
Schulz, T; Flecken, M; Kapischke, M; Busing, M
2005-05-01
Since 1996, preoperative single-shot dose antithymocyte globuline (ATG) with prednisolone (PRD), mycophenolate mofetile (MMF), and tacrolimus (TAC) is the favorite induction therapy in our center. In a series of 25 first simultaneous pancreas and kidney transplant (SPK) recipients, 5 doses of daclizumab were administered in addition to standard induction. Here we present our 3-year experience. Immunosuppression was started prior to reperfusion consisting of daclizumab (1 mg/kg body weight [bw]), ATG (4-6 mg/kg bw) and 250 mg PRD. After surgery, PRD was reduced gradually, TAC trough levels were between 8-15 ng/mL, MMF was given twice daily (2-3 g/d) as well as 4 further doses dacilzumab every 14 days. After 3 years, patient, pancreas, and kidney graft survival rates are 100%, 84%, and 92%, respectively. Four pancreas grafts were lost (chronic allograft dysfunction, n = 2; recurrent abdominal infection, n = 1; acute rejection [AR] without treatment, n = 1). Both patients suffering from severe infection and untreated AR lost their kidney graft too. During the first 3 months after SPK, 3 AR episodes were observed in 2 patients (8%). After a 3-year period, 8 AR episodes occurred in 7 recipients (28%). AR was treated using PRD (n = 5) or ATG (n = 1). In 1 case, immunosuppression was switched from TAC to sirolimus successfully. Overall, 8 AR episodes occurred in 7 patients (28%) during the first 3 years after SPK. One severe infection led to graft lost 13 months after SPK. In this series, the combination of ATG and daclizumab prevented AR episodes, successfully providing considerable 3-year survival rates.
NASA Astrophysics Data System (ADS)
Phillips, M.; Denning, A. S.; Randall, D. A.; Branson, M.
2016-12-01
Multi-scale models of the atmosphere provide an opportunity to investigate processes that are unresolved by traditional Global Climate Models while at the same time remaining viable in terms of computational resources for climate-length time scales. The MMF represents a shift away from large horizontal grid spacing in traditional GCMs that leads to overabundant light precipitation and lack of heavy events, toward a model where precipitation intensity is allowed to vary over a much wider range of values. Resolving atmospheric motions on the scale of 4 km makes it possible to recover features of precipitation, such as intense downpours, that were previously only obtained by computationally expensive regional simulations. These heavy precipitation events may have little impact on large-scale moisture and energy budgets, but are outstanding in terms of interaction with the land surface and potential impact on human life. Three versions of the Community Earth System Model were used in this study; the standard CESM, the multi-scale `Super-Parameterized' CESM where large-scale parameterizations have been replaced with a 2D cloud-permitting model, and a multi-instance land version of the SP-CESM where each column of the 2D CRM is allowed to interact with an individual land unit. These simulations were carried out using prescribed Sea Surface Temperatures for the period from 1979-2006 with daily precipitation saved for all 28 years. Comparisons of the statistical properties of precipitation between model architectures and against observations from rain gauges were made, with specific focus on detection and evaluation of extreme precipitation events.
NASA Astrophysics Data System (ADS)
Xu, Kuan-Man; Cheng, Anning
2014-05-01
A high-resolution cloud-resolving model (CRM) embedded in a general circulation model (GCM) is an attractive alternative for climate modeling because it replaces all traditional cloud parameterizations and explicitly simulates cloud physical processes in each grid column of the GCM. Such an approach is called "Multiscale Modeling Framework." MMF still needs to parameterize the subgrid-scale (SGS) processes associated with clouds and large turbulent eddies because circulations associated with planetary boundary layer (PBL) and in-cloud turbulence are unresolved by CRMs with horizontal grid sizes on the order of a few kilometers. A third-order turbulence closure (IPHOC) has been implemented in the CRM component of the super-parameterized Community Atmosphere Model (SPCAM). IPHOC is used to predict (or diagnose) fractional cloudiness and the variability of temperature and water vapor at scales that are not resolved on the CRM's grid. This model has produced promised results, especially for low-level cloud climatology, seasonal variations and diurnal variations (Cheng and Xu 2011, 2013a, b; Xu and Cheng 2013a, b). Because of the enormous computational cost of SPCAM-IPHOC, which is 400 times of a conventional CAM, we decided to bypass the CRM and implement the IPHOC directly to CAM version 5 (CAM5). IPHOC replaces the PBL/stratocumulus, shallow convection, and cloud macrophysics parameterizations in CAM5. Since there are large discrepancies in the spatial and temporal scales between CRM and CAM5, IPHOC used in CAM5 has to be modified from that used in SPCAM. In particular, we diagnose all second- and third-order moments except for the fluxes. These prognostic and diagnostic moments are used to select a double-Gaussian probability density function to describe the SGS variability. We also incorporate a diagnostic PBL height parameterization to represent the strong inversion above PBL. The goal of this study is to compare the simulation of the climatology from these three models (CAM5, CAM5-IPHOC and SPCAM-IPHOC), with emphasis on low-level clouds and precipitation. Detailed comparisons of scatter diagrams among the monthly-mean low-level cloudiness, PBL height, surface relative humidity and lower tropospheric stability (LTS) reveal the relative strengths and weaknesses for five coastal low-cloud regions among the three models. Observations from CloudSat and CALIPSO and ECMWF Interim reanalysis are used as the truths for the comparisons. We found that the standard CAM5 underestimates cloudiness and produces small cloud fractions at low PBL heights that contradict with observations. CAM5-IPHOC tends to overestimate low clouds but the ranges of LTS and PBL height variations are most realistic. SPCAM-IPHOC seems to produce most realistic results with relatively consistent results from one region to another. Further comparisons with other atmospheric environmental variables will be helpful to reveal the causes of model deficiencies so that SPCAM-IPHOC results will provide guidance to the other two models.
Resolution of Graves' disease after renal transplantation.
Lee, Yvonne; Butani, Lavjay; Glaser, Nicole; Nguyen, Stephanie
2016-06-01
We report a case of an adolescent boy with Down's syndrome and ESRD on hemodialysis who developed mild Graves' disease that was not amenable to radioablation, surgery, or ATDs. After 14 months of observation without resolution of Graves' disease, he successfully received a DDRT with a steroid minimization protocol. Thymoglobulin and a three-day course of steroids were used for induction and he was started on tacrolimus, MMF, and pravastatin for maintenance transplant immunosuppression. One month after transplantation, all biochemical markers and antibody profiling for Graves' disease had resolved and remain normal one yr later. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Coupling efficiency of laser beam to multimode fiber for free space optical communication
NASA Astrophysics Data System (ADS)
Arisa, Suguru; Takayama, Yoshihisa; Endo, Hiroyuki; Shimizu, Ryosuke; Fujiwara, Mikio; Sasaki, Masahide
2017-11-01
Recently, the free space optical (FSO) communications have been widely studied as an alternative for large capacity communications and its possible implementation in satellite and terrestrial laser links. In satellite communications, clouds can strongly attenuate the laser signal that would lead to high bit-error rates or temporal unavailability of the link. To overcome the cloud coverage effects, often site diversity technique is implemented. When using multiple ground stations though, simplified optical system is required to allow the usage of more flexible approaches. In terrestrial laser communications, several methods for optical system simplification by using a multimode fiber (MMF) have been proposed.
Biological evolution of replicator systems: towards a quantitative approach.
Martin, Osmel; Horvath, J E
2013-04-01
The aim of this work is to study the features of a simple replicator chemical model of the relation between kinetic stability and entropy production under the action of external perturbations. We quantitatively explore the different paths leading to evolution in a toy model where two independent replicators compete for the same substrate. To do that, the same scenario described originally by Pross (J Phys Org Chem 17:312-316, 2004) is revised and new criteria to define the kinetic stability are proposed. Our results suggest that fast replicator populations are continually favored by the effects of strong stochastic environmental fluctuations capable to determine the global population, the former assumed to be the only acting evolution force. We demonstrate that the process is continually driven by strong perturbations only, and that population crashes may be useful proxies for these catastrophic environmental fluctuations. As expected, such behavior is particularly enhanced under very large scale perturbations, suggesting a likely dynamical footprint in the recovery patterns of new species after mass extinction events in the Earth's geological past. Furthermore, the hypothesis that natural selection always favors the faster processes may give theoretical support to different studies that claim the applicability of maximum principles like the Maximum Metabolic Flux (MMF) or Maximum Entropy Productions Principle (MEPP), seen as the main goal of biological evolution.
Biological Evolution of Replicator Systems: Towards a Quantitative Approach
NASA Astrophysics Data System (ADS)
Martin, Osmel; Horvath, J. E.
2013-04-01
The aim of this work is to study the features of a simple replicator chemical model of the relation between kinetic stability and entropy production under the action of external perturbations. We quantitatively explore the different paths leading to evolution in a toy model where two independent replicators compete for the same substrate. To do that, the same scenario described originally by Pross (J Phys Org Chem 17:312-316, 2004) is revised and new criteria to define the kinetic stability are proposed. Our results suggest that fast replicator populations are continually favored by the effects of strong stochastic environmental fluctuations capable to determine the global population, the former assumed to be the only acting evolution force. We demonstrate that the process is continually driven by strong perturbations only, and that population crashes may be useful proxies for these catastrophic environmental fluctuations. As expected, such behavior is particularly enhanced under very large scale perturbations, suggesting a likely dynamical footprint in the recovery patterns of new species after mass extinction events in the Earth's geological past. Furthermore, the hypothesis that natural selection always favors the faster processes may give theoretical support to different studies that claim the applicability of maximum principles like the Maximum Metabolic Flux (MMF) or Maximum Entropy Productions Principle (MEPP), seen as the main goal of biological evolution.
[Duodenal villous atrophy associated with Mycophenolate mofetil: report of one case].
Tapia, Oscar; Villaseca, Miguel; Sierralta, Armando; Roa, Juan Carlos
2010-05-01
Mycophenolate mofetil (MMF) is an immunosupressor agent frequently used in patients after bone marrow or solid organ transplants. The most common adverse reactions of the drug are gastrointestinal, specially diarrhea and vomiting. We report a 53-year-old male, that received a heart transplant receiving immunosuppression with cyclosporine, mycophenolate mofetil and prednisone. Six months after the transplant, the patient started with diarrhea, anorexia and weight loss. A duodenal biopsy showed villous atrophy. Celiac disease and the presence of parasites were discarded. Mycophenolate mofetil was discontinued and one week later, diarrhea subsided. Two months later the patient was asymptomatic and recovered weight. A new duodenal biopsy showed absence of villous atrophy.
Zhang, Yong-xing; Wei, Qing-yu; Wang, Juan; Qiao, Ting-hui; Bai, Hong-bing; Cai, Li-na
2007-06-01
To explore the damage of respiratory system in the traffic policemen induced by automobile tyre colloidal particle and its allergenicity. The respiratory system symptoms in 445 traffic policemen working outside their offices and 243 controls were investigated and their pulmonary ventilation function index such as FVC, FEV(1.0), MMF and V(50) were determined. The specific IgE antibody of automobile tyre colloidal particle of their serum was determined and the skin-prick test of automobile tyre colloidal particle antigen was performed. Sixty-six traffic policemen working outside their offices and 5 controls with the positive of IgE antibody among them were detected by nasal mucosa provocation test. Sixty-six traffic policemen working outside their offices with the positive of IgE antibody were determined by Terbutaline inhalation test. The positive rate of respiratory system symptoms of traffic policemen such as cough, stethocatharsis, short breath, nasal obstruction, sneeze and nose running was 38.02%, 27.03%, 20.00%, 23.08%, 27.47%, 32.09% and 34.95% respectively and significantly higher than those of the control with significant difference (P < 0.01) or (P < 0.05). The positive rate of specific IgE antibody of automobile tyre colloidal particle, skin- prick test and nasal mucosa provocation test was 14.51%, 23.73% and 54.55% respectively with significant difference (P < 0.01) and (P < 0.05). The percentage, the actual figure compared with the prediction figure, of the index of pulmonary ventilation function (FVC, FEV(1.0) MMF and V(50)) of traffic policemen were significantly lower than those of the control. Terbutaline inhalation test in 66 positive subjects of specific IgE antibody of automobile tyre colloidal particle was positive in 44 subjects, accounting for 9.67% in all policemen investigated. The automobile tyre colloidal particle is one of etiological factors that induce pulmonary ventilation function damage and could result in allergic asthma of traffic police.
Songbirds and humans apply different strategies in a sound sequence discrimination task.
Seki, Yoshimasa; Suzuki, Kenta; Osawa, Ayumi M; Okanoya, Kazuo
2013-01-01
The abilities of animals and humans to extract rules from sound sequences have previously been compared using observation of spontaneous responses and conditioning techniques. However, the results were inconsistently interpreted across studies possibly due to methodological and/or species differences. Therefore, we examined the strategies for discrimination of sound sequences in Bengalese finches and humans using the same protocol. Birds were trained on a GO/NOGO task to discriminate between two categories of sound stimulus generated based on an "AAB" or "ABB" rule. The sound elements used were taken from a variety of male (M) and female (F) calls, such that the sequences could be represented as MMF and MFF. In test sessions, FFM and FMM sequences, which were never presented in the training sessions but conformed to the rule, were presented as probe stimuli. The results suggested two discriminative strategies were being applied: (1) memorizing sound patterns of either GO or NOGO stimuli and generating the appropriate responses for only those sounds; and (2) using the repeated element as a cue. There was no evidence that the birds successfully extracted the abstract rule (i.e., AAB and ABB); MMF-GO subjects did not produce a GO response for FFM and vice versa. Next we examined whether those strategies were also applicable for human participants on the same task. The results and questionnaires revealed that participants extracted the abstract rule, and most of them employed it to discriminate the sequences. This strategy was never observed in bird subjects, although some participants used strategies similar to the birds when responding to the probe stimuli. Our results showed that the human participants applied the abstract rule in the task even without instruction but Bengalese finches did not, thereby reconfirming that humans have to extract abstract rules from sound sequences that is distinct from non-human animals.
High-Performance X-ray Detection in a New Analytical Electron Microscope
NASA Technical Reports Server (NTRS)
Lyman, C. E.; Goldstein, J. I.; Williams, D. B.; Ackland, D. W.; vonHarrach, S.; Nicholls, A. W.; Statham, P. J.
1994-01-01
X-ray detection by energy-dispersive spectrometry in the analytical electron microscope (AEM) is often limited by low collected X-ray intensity (P), modest peak-to-background (P/B) ratios, and limitations on total counting time (tau) due to specimen drift and contamination. A new AFM has been designed with maximization of P. P/B, and tau as the primary considerations. Maximization of P has been accomplished by employing a field-emission electron gun, X-ray detectors with high collection angles, high-speed beam blanking to allow only one photon into the detector at a time, and simultaneous collection from two detectors. P/B has been maximized by reducing extraneous background signals generated at the specimen holder, the polepieces and the detector collimator. The maximum practical tau has been increased by reducing specimen contamination and employing electronic drift correction. Performance improvments have been measured using the NIST standard Cr thin film. The 0-3 steradian solid angle of X-ray collection is the highest value available. The beam blanking scheme for X-ray detection provides 3-4 times greater throughput of X-rays at high count rates into a recorded spectrum than normal systems employing pulse-pileup rejection circuits. Simultaneous X-ray collection from two detectors allows the highest X-ray intensity yet recorded to be collected from the NIST Cr thin film. The measured P/B of 6300 is the highest level recorded for an AEM. In addition to collected X-ray intensity (cps/nA) and P/B measured on the standard Cr film, the product of these can be used as a figure-of-merit to evaluate instruments. Estimated minimum mass fraction (MMF) for Cr measured on the standard NIST Cr thin film is also proposed as a figure-of-merit for comparing X-ray detection in AEMs. Determinations here of the MMF of Cr detectable show at least a threefold improvement over previous instruments.
Schulz, T; Papapostolou, G; Schenker, P; Kapischke, M
2005-03-01
Single-shot antithymocyte globulin (ATG) prior to reperfusion followed by tacrolimus (TAC), mycophenolate mofetil (MMF), and prednisolone (PRD) is an established induction therapy in simultaneous pancreas kidney transplant (SPK) recipients. We retrospectively analyzed 6-month data from 105 patients who received their first SPK. From January 1996 to December 2000, ATG-Fresenius was used. Since January 2001, Thymoglobulin has been administered. In the first group, 58 patients were treated with ATG-Fresenius (4-6 mg/kg body weight). In the second group, 47 patients received Thymoglobulin (1.5-2.5 mg/kg body weight). HLA-mismatch was comparable. After an observation period of 6 months, patients, kidney, and pancreas graft survival is 98.3%, 96.6%, and 93.1% in group I and 97.9%, 97.9%, and 85.1% in group II, respectively. In each group, one death with functioning graft (DWFG) was observed. Twenty (34.5%) acute rejection episodes (AR) were observed (18 patients) in group I. They were treated with steroids (n = 16) or steroids/OKT3 (n = 4). One kidney graft failure was observed due to rejection and one due to DWFG. Four pancreas grafts were lost (thrombosis, n = 2; AR, n = 1; DWFG, n = 1). In group II, 15 AR (31.9%) were seen in 12 patients and were treated with steroids (n = 12), steroids/ATG (n = 1), or steroids/OKT3 (n = 2). Seven pancreas (thrombosis, n = 5; rejection, n = 1; DWFG, n = 1) and one kidney (DWFG, n = 1) graft losses occurred. These data clearly establish that single-shot ATG prior to reperfusion, followed by TAC, MMF, and PRD results in a low incidence of AR (34.5% in group I and 31.9% in group II) after SPK. Only 6.9% (group I) and 6.4% (group II) of the patients received antibodies for rejection treatment.
Non-Ge optics and low-cost electronics designs for LIR imagers
NASA Astrophysics Data System (ADS)
Zhang, Evan; Song, Vivian W.; Zhang, James S.; Yang, Cunwu
2003-01-01
Until today, almost all objective lenses and windows of LIR imagers use crystal Germanium (Ge) as the optical material. Germanium is heavy, expensive and very sensitive to the environmental temperature change. When the temperature rises above 120° C, the lens becomes opaque. It is necessary to overcome these shortcomings. Using the analytic universal skew ray tracing formula and the automatic optical system design software developed by us, we successfully designed a 150mm/F1 objective lens using Ge and non-Ge materials for the LIR imager of the missile seeker and airborne surveillance. We also successfully designed a 25mm/F1 objective lens with large FOV of 30°x40° using only non-Ge materials for the LIR imager of the helmet mounted search and rescue system. Good image quality is obtained. The cost is less than half of the Ge lens and the high temperature resistance is much better. In order to increase the S/N ratio 4 times for the low-sensitivity UFPA, an immersed Ge lens for the UFPA is also successfully designed. Currently, most of UFPAs use high-cost Digital Signal Processing (DSP) module. The LIR imager needs at least two circuit boards. We present a design that uses low-cost Altera processor and the imager only needs one board without Thermal Electrical Cooler (TEC). Therefore, three "AA" batteries can operate the imager for more than 4 hours. By inserting data between pixels and enhance the contrast, the image from the 120x120/50μ UFPA is even better than the image from the 240x320/50μ array. This gives us an opportunity to reduce the imager cost to 2/3 of the larger format without degrading the image quality. These innovative researches give us a chance to build a small, lightweight, inexpensive, and good image quality LIR imager for homeland security and many other military and commercial applications. Two patents were pending and one was granted.
Tashkin, Donald P; Volkmann, Elizabeth R; Tseng, Chi-Hong; Roth, Michael D; Khanna, Dinesh; Furst, Daniel E; Clements, Philip J; Theodore, Arthur; Kafaja, Suzanne; Kim, Grace Hyun; Goldin, Jonathan; Ariolla, Edgar; Elashoff, Robert M
2017-04-01
Cough is a common symptom of scleroderma-related interstitial lung disease (SSc-ILD), but its relationship to other characteristics of SSc-ILD, impact on cough-specific quality of life (QoL), and response to therapy for SSc-ILD have not been well studied. We investigated frequent cough (FC) in patients with SSc-ILD (N = 142) enrolled in the Scleroderma Lung Study II, a randomized controlled trial comparing mycophenolate mofetil (MMF) and oral cyclophosphamide (CYC) as treatments for interstitial lung disease (ILD). We determined the impact of FC on QoL (Leicester Cough Questionnaire [LCQ]), evaluated the change in FC in response to treatment for SSc-ILD, and examined the relationship between gastroesophageal reflux disease (GERD) and cough during the trial. Study participants who reported FC at baseline (61.3%) reported significantly more dyspnea, exhibited more extensive ILD on high-resolution CT, had a lower diffusing capacity for carbon monoxide, and reported more GERD symptoms than did those without FC. Cough-specific QoL was modestly impaired in patients with FC (total LCQ score, 15.4 ± 3.7; normal range, 3-21 [higher scores indicate worse QoL]). The proportion of patients with FC at baseline declined by 44% and 41% over 2 years in the CYC and MMF treatment arms, respectively, and this decline was significantly related to changes in GERD and ILD severity. FC occurs commonly in SSc-ILD, correlates with both the presence and severity of GERD and ILD at baseline, and declines in parallel with improvements in both ILD and GERD over a 2-year course of therapy. Frequent cough might serve as a useful surrogate marker of treatment response in SSc-ILD trials. ClinicalTrials.gov; No.: NCT00883129; URL: www.clinicaltrials.gov. Copyright © 2016 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.
1982-06-17
Pawasas .mmf OF ms PoAn N LMaU Porn ~- ~.mw -------------------L GLOBAL CLIMATOLOGY BRANCH 2 AIR wEATHER SERVICE/MAC PERCENTAGE FREQUENCY OF WIND...2.21 .71 .21 S3 53 66! / 53 4.4 2 51, 2. 3.5 .5 53 53 64164 5 /_49 1 2 7 3.1[ .9 ___ 4.. boi 5 4./47 : 1.51 .9 .1 I ’.0 56 65 4 ___/ .3 ,1 I...Iet Boi ___o - - - - - - - - - - - _74 9_ ___S7 9 6 InI 6 3IS s T a0 oa ft811 2095 3811s.1 7 43 0112 dS 29 __ I va i iO1- 34-6-- -------------- 109
High sensitivity optical fiber liquid level sensor based on a compact MMF-HCF-FBG structure
NASA Astrophysics Data System (ADS)
Zhang, Yunshan; Zhang, Weigang; Chen, Lei; Zhang, Yanxin; Wang, Song; Yan, Tieyi
2018-05-01
An ultra-high sensitivity fiber liquid level sensor based on wavelength demodulation is proposed and demonstrated. The sensor is composed of a segment of multimode fiber and a large aperture hollow-core fiber assisted by a fiber Bragg grating (FBG). Interference occurs due to core mismatching and different modes with different effective refractive indices. The experimental results show that the liquid level sensitivity of the sensor is 1.145 nm mm‑1, and the linearity is up to 0.996. The dynamic temperature compensation of the sensor can be achieved by cascading an FBG. Considering the high sensitivity and compact structure of the sensor, it can be used for real-time intelligent monitoring of tiny changes in liquid level.
NASA Astrophysics Data System (ADS)
Dodson, Jason B.
Deep convective clouds (DCCs) play an important role in regulating global climate through vertical mass flux, vertical water transport, and radiation. For general circulation models (GCMs) to simulate the global climate realistically, they must simulate DCCs realistically. GCMs have traditionally used cumulus parameterizations (CPs). Much recent research has shown that multiple persistent unrealistic behaviors in GCMs are related to limitations of CPs. Two alternatives to CPs exist: the global cloud-resolving model (GCRM), and the multiscale modeling framework (MMF). Both can directly simulate the coarser features of DCCs because of their multi-kilometer horizontal resolutions, and can simulate large-scale meteorological processes more realistically than GCMs. However, the question of realistic behavior of simulated DCCs remains. How closely do simulated DCCs resemble observed DCCs? In this study I examine the behavior of DCCs in the Nonhydrostatic Icosahedral Atmospheric Model (NICAM) and Superparameterized Community Atmospheric Model (SP-CAM), the latter with both single-moment and double-moment microphysics. I place particular emphasis on the relationship between cloud vertical structure and convective environment. I also emphasize the transition between shallow clouds and mature DCCs. The spatial domains used are the tropical oceans and the contiguous United States (CONUS), the latter of which produces frequent vigorous convection during the summer. CloudSat is used to observe DCCs, and A-Train and reanalysis data are used to represent the large-scale environment in which the clouds form. The CloudSat cloud mask and radar reflectivity profiles for CONUS cumuliform clouds (defined as clouds with a base within the planetary boundary layer) during boreal summer are first averaged and compared. Both NICAM and SP-CAM greatly underestimate the vertical growth of cumuliform clouds. Then they are sorted by three large-scale environmental variables: total preciptable water (TPW), surface air temperature (SAT), and 500hPa vertical velocity (W500), representing the dynamical and thermodynamical environment in which the clouds form. The sorted CloudSat profiles are then compared with NICAM and SP-CAM profiles simulated with the Quickbeam CloudSat simulator. Both models have considerable difficulty representing the relationship of SAT and clouds over CONUS. For TPW and W500, shallow clouds transition to DCCs at higher values than observed. This may be an indication of the models' inability to represent the formation of DCCs in marginal convective environments. NICAM develops tall DCCs in highly favorable environments, but SP-CAM appears to be incapable of developing tall DCCs in almost any environment. The use of double moment microphysics in SP-CAM improves the frequency of deep clouds and their relationship with TPW, but not SAT. Both models underpredict radar reflectivity in the upper cloud of mature DCCs. SP-CAM with single moment microphysics has a particularly unrealistic DCC reflectivity profile, but with double moment microphysics it improves substantially. SP-CAM with double-moment microphysics unexpectedly appears to weaken DCC updraft strength as TPW increases, but otherwise both NICAM and SP-CAM represent the environment-versus-DCC relationships fairly realistically.
NASA Technical Reports Server (NTRS)
Rawat, Banmali
2000-01-01
The multimode fiber bandwidth enhancement techniques to meet the Gigabit Ethernet standards for local area networks (LAN) of the Kennedy Space Center and other NASA centers have been discussed. Connector with lateral offset coupling between single mode launch fiber cable and the multimode fiber cable has been thoroughly investigated. An optimization of connector position offset for 8 km long optical fiber link at 1300 nm with 9 micrometer diameter single mode fiber (SMF) and 50 micrometer diameter multimode fiber (MMF) coupling has been obtained. The optimization is done in terms of bandwidth, eye-pattern, and bit pattern measurements. It is simpler, is a highly practical approach and is cheaper as no additional cost to manufacture the offset type of connectors is involved.
van Rijn, Peter W; Ali, Usama S
2017-05-01
We compare three modelling frameworks for accuracy and speed of item responses in the context of adaptive testing. The first framework is based on modelling scores that result from a scoring rule that incorporates both accuracy and speed. The second framework is the hierarchical modelling approach developed by van der Linden (2007, Psychometrika, 72, 287) in which a regular item response model is specified for accuracy and a log-normal model for speed. The third framework is the diffusion framework in which the response is assumed to be the result of a Wiener process. Although the three frameworks differ in the relation between accuracy and speed, one commonality is that the marginal model for accuracy can be simplified to the two-parameter logistic model. We discuss both conditional and marginal estimation of model parameters. Models from all three frameworks were fitted to data from a mathematics and spelling test. Furthermore, we applied a linear and adaptive testing mode to the data off-line in order to determine differences between modelling frameworks. It was found that a model from the scoring rule framework outperformed a hierarchical model in terms of model-based reliability, but the results were mixed with respect to correlations with external measures. © 2017 The British Psychological Society.
Oddo, Vanessa M; Ickes, Scott B
2018-03-01
Women's employment improves household income, and can increase resources available for food expenditure. However, employed women face time constraints that may influence caregiving and infant and young child feeding (IYCF) practices. As economic and social trends shift to include more women in the labor force in low- and middle-income countries (LMICs), a current understanding of the association between maternal employment and IYCF is needed. We investigated the association between maternal employment and IYCF. Using cross-sectional samples from 50 Demographic and Health Surveys, we investigated the association between maternal employment and 3 indicators of IYCF: exclusive breastfeeding (EBF) among children aged <6 mo (n = 47,340) and minimum diet diversity (MDD) and minimum meal frequency (MMF) (n = 137,208) among children aged 6-23 mo. Mothers were categorized as formally employed, informally employed, or nonemployed. We used meta-analysis to pool associations across all countries and by region. According to pooled estimates, neither formal [pooled odds ratio (POR) = 0.91; 95% CI: 0.81, 1.03] nor informal employment (POR = 1.05; 95% CI: 0.95, 1.16), compared to nonemployment, was associated with EBF. Children of both formally and informally employed women, compared to children of nonemployed women, had higher odds of meeting MDD (formal POR = 1.47; 95% CI: 1.35, 1.60; informal POR = 1.11; 95% CI: 1.03, 1.20) and MMF (formal POR = 1.18; 95% CI: 1.10, 1.26; informal POR = 1.15; 95% CI: 1.06, 1.24). Sensitivity analyses indicated that compared to nonemployed mothers, the odds of continued breastfeeding at 1 y were lower among formally employed mothers (POR = 0.82; 95% CI: 0.73, 0.98) and higher among informally employed mothers (POR = 1.19; 95% CI: 1.01, 1.40). Efforts to promote formalized employment among mothers may be an effective method for improving diet diversity and feeding frequency in LMICs. Formally employed mothers may benefit from support for breastfeeding to enable continued breastfeeding through infancy. This trial was registered at clinicaltrials.gov as NCT03209999.
A complete categorization of multiscale models of infectious disease systems.
Garira, Winston
2017-12-01
Modelling of infectious disease systems has entered a new era in which disease modellers are increasingly turning to multiscale modelling to extend traditional modelling frameworks into new application areas and to achieve higher levels of detail and accuracy in characterizing infectious disease systems. In this paper we present a categorization framework for categorizing multiscale models of infectious disease systems. The categorization framework consists of five integration frameworks and five criteria. We use the categorization framework to give a complete categorization of host-level immuno-epidemiological models (HL-IEMs). This categorization framework is also shown to be applicable in categorizing other types of multiscale models of infectious diseases beyond HL-IEMs through modifying the initial categorization framework presented in this study. Categorization of multiscale models of infectious disease systems in this way is useful in bringing some order to the discussion on the structure of these multiscale models.
A UML profile for framework modeling.
Xu, Xiao-liang; Wang, Le-yu; Zhou, Hong
2004-01-01
The current standard Unified Modeling Language(UML) could not model framework flexibility and extendability adequately due to lack of appropriate constructs to distinguish framework hot-spots from kernel elements. A new UML profile that may customize UML for framework modeling was presented using the extension mechanisms of UML, providing a group of UML extensions to meet the needs of framework modeling. In this profile, the extended class diagrams and sequence diagrams were defined to straightforwardly identify the hot-spots and describe their instantiation restrictions. A transformation model based on design patterns was also put forward, such that the profile based framework design diagrams could be automatically mapped to the corresponding implementation diagrams. It was proved that the presented profile makes framework modeling more straightforwardly and therefore easier to understand and instantiate.
Use of Annotations for Component and Framework Interoperability
NASA Astrophysics Data System (ADS)
David, O.; Lloyd, W.; Carlson, J.; Leavesley, G. H.; Geter, F.
2009-12-01
The popular programming languages Java and C# provide annotations, a form of meta-data construct. Software frameworks for web integration, web services, database access, and unit testing now take advantage of annotations to reduce the complexity of APIs and the quantity of integration code between the application and framework infrastructure. Adopting annotation features in frameworks has been observed to lead to cleaner and leaner application code. The USDA Object Modeling System (OMS) version 3.0 fully embraces the annotation approach and additionally defines a meta-data standard for components and models. In version 3.0 framework/model integration previously accomplished using API calls is now achieved using descriptive annotations. This enables the framework to provide additional functionality non-invasively such as implicit multithreading, and auto-documenting capabilities while achieving a significant reduction in the size of the model source code. Using a non-invasive methodology leads to models and modeling components with only minimal dependencies on the modeling framework. Since models and modeling components are not directly bound to framework by the use of specific APIs and/or data types they can more easily be reused both within the framework as well as outside of it. To study the effectiveness of an annotation based framework approach with other modeling frameworks, a framework-invasiveness study was conducted to evaluate the effects of framework design on model code quality. A monthly water balance model was implemented across several modeling frameworks and several software metrics were collected. The metrics selected were measures of non-invasive design methods for modeling frameworks from a software engineering perspective. It appears that the use of annotations positively impacts several software quality measures. In a next step, the PRMS model was implemented in OMS 3.0 and is currently being implemented for water supply forecasting in the western United States at the USDA NRCS National Water and Climate Center. PRMS is a component based modular precipitation-runoff model developed to evaluate the impacts of various combinations of precipitation, climate, and land use on streamflow and general basin hydrology. The new OMS 3.0 PRMS model source code is more concise and flexible as a result of using the new framework’s annotation based approach. The fully annotated components are now providing information directly for (i) model assembly and building, (ii) dataflow analysis for implicit multithreading, (iii) automated and comprehensive model documentation of component dependencies, physical data properties, (iv) automated model and component testing, and (v) automated audit-traceability to account for all model resources leading to a particular simulation result. Experience to date has demonstrated the multi-purpose value of using annotations. Annotations are also a feasible and practical method to enable interoperability among models and modeling frameworks. As a prototype example, model code annotations were used to generate binding and mediation code to allow the use of OMS 3.0 model components within the OpenMI context.
Alcohol sensor based on u-bent hetero-structured fiber optic
NASA Astrophysics Data System (ADS)
Patrialova, Sefi N.; Hatta, Agus M.; Sekartedjo, Sekartedjo
2016-11-01
A sensor based on a fiber optic hetero-structure to determine the concentration of alcohol has been proposed. The structure of the sensing probe in this research is a singlemode-multimode-singlemode (SMS) which bent into Ushaped and soon called as SMS u-bent. The SMS structure was chosen to get a higher sensitivity. This research utilizes the principle of multimode interference and evanescent field by modifying the cladding with various alcohol concentration. Testing of the sensor's performance has been done by measuring the sensor's power output response to the length of the SMS fiber optic, bending diameter, and alcohol concentration. Based on the experiment result, the ubent SMS fiber optic with 50 mm bending diameter and 63 mm MMF lenght has the highest sensitivity, 3.87 dB/% and the minimum resolution, 0.26 x 10-3 %.
NASA Astrophysics Data System (ADS)
Laithwaite, E. R.; Kuznetsov, S. B.
1980-09-01
A new technique of continuously generating reactive power from the stator of a brushless induction machine is conceived and tested on a 10-kw linear machine and on 35 and 150 rotary cage motors. An auxiliary magnetic wave traveling at rotor speed is artificially created by the space-transient attributable to the asymmetrical stator winding. At least two distinct windings of different pole-pitch must be incorporated. This rotor wave drifts in and out of phase repeatedly with the stator MMF wave proper and the resulting modulation of the airgap flux is used to generate reactive VA apart from that required for magnetization or leakage flux. The VAR generation effect increases with machine size, and leading power factor operation of the entire machine is viable for large industrial motors and power system induction generators.
1060-nm VCSEL-based parallel-optical modules for optical interconnects
NASA Astrophysics Data System (ADS)
Nishimura, N.; Nagashima, K.; Kise, T.; Rizky, A. F.; Uemura, T.; Nekado, Y.; Ishikawa, Y.; Nasu, H.
2015-03-01
The capability of mounting a parallel-optical module onto a PCB through solder-reflow process contributes to reduce the number of piece parts, simplify its assembly process, and minimize a foot print for both AOC and on-board applications. We introduce solder-reflow-capable parallel-optical modules employing 1060-nm InGaAs/GaAs VCSEL which leads to the advantages of realizing wider modulation bandwidth, longer transmission distance, and higher reliability. We demonstrate 4-channel parallel optical link performance operated at a bit stream of 28 Gb/s 231-1 PRBS for each channel and transmitted through a 50-μm-core MMF beyond 500 m. We also introduce a new mounting technology of paralleloptical module to realize maintaining good coupling and robust electrical connection during solder-reflow process between an optical module and a polymer-waveguide-embedded PCB.
A number of multimedia modeling frameworks are currently being developed. The Multimedia Integrated Modeling System (MIMS) is one of these frameworks. A framework should be seen as more of a multimedia modeling infrastructure than a single software system. This infrastructure do...
Narrative review of frameworks for translating research evidence into policy and practice.
Milat, Andrew J; Li, Ben
2017-02-15
A significant challenge in research translation is that interested parties interpret and apply the associated terms and conceptual frameworks in different ways. The purpose of this review was to: a) examine different research translation frameworks; b) examine the similarities and differences between the frameworks; and c) identify key strengths and weaknesses of the models when they are applied in practice. The review involved a keyword search of PubMed. The search string was (translational research OR knowledge translation OR evidence to practice) AND (framework OR model OR theory) AND (public health OR health promotion OR medicine). Included studies were published in English between January 1990 and December 2014, and described frameworks, models or theories associated with research translation. The final review included 98 papers, and 41 different frameworks and models were identified. The most frequently applied knowledge translation framework in the literature was RE-AIM, followed by the knowledge translation continuum or 'T' models, the Knowledge to Action framework, the PARiHS framework, evidence based public health models, and the stages of research and evaluation model. The models identified in this review stem from different fields, including implementation science, basic and medical sciences, health services research and public health, and propose different but related pathways to closing the research-practice gap.
The code base for creating versions of the USEEIO model and USEEIO-like models is called the USEEIO Modeling Framework. The framework is built in a combination of R and Python languages.This demonstration provides a brief overview and introduction into the framework.
Model and Interoperability using Meta Data Annotations
NASA Astrophysics Data System (ADS)
David, O.
2011-12-01
Software frameworks and architectures are in need for meta data to efficiently support model integration. Modelers have to know the context of a model, often stepping into modeling semantics and auxiliary information usually not provided in a concise structure and universal format, consumable by a range of (modeling) tools. XML often seems the obvious solution for capturing meta data, but its wide adoption to facilitate model interoperability is limited by XML schema fragmentation, complexity, and verbosity outside of a data-automation process. Ontologies seem to overcome those shortcomings, however the practical significance of their use remains to be demonstrated. OMS version 3 took a different approach for meta data representation. The fundamental building block of a modular model in OMS is a software component representing a single physical process, calibration method, or data access approach. Here, programing language features known as Annotations or Attributes were adopted. Within other (non-modeling) frameworks it has been observed that annotations lead to cleaner and leaner application code. Framework-supported model integration, traditionally accomplished using Application Programming Interfaces (API) calls is now achieved using descriptive code annotations. Fully annotated components for various hydrological and Ag-system models now provide information directly for (i) model assembly and building, (ii) data flow analysis for implicit multi-threading or visualization, (iii) automated and comprehensive model documentation of component dependencies, physical data properties, (iv) automated model and component testing, calibration, and optimization, and (v) automated audit-traceability to account for all model resources leading to a particular simulation result. Such a non-invasive methodology leads to models and modeling components with only minimal dependencies on the modeling framework but a strong reference to its originating code. Since models and modeling components are not directly bound to framework by the use of specific APIs and/or data types they can more easily be reused both within the framework as well as outside. While providing all those capabilities, a significant reduction in the size of the model source code was achieved. To support the benefit of annotations for a modeler, studies were conducted to evaluate the effectiveness of an annotation based framework approach with other modeling frameworks and libraries, a framework-invasiveness study was conducted to evaluate the effects of framework design on model code quality. A typical hydrological model was implemented across several modeling frameworks and several software metrics were collected. The metrics selected were measures of non-invasive design methods for modeling frameworks from a software engineering perspective. It appears that the use of annotations positively impacts several software quality measures. Experience to date has demonstrated the multi-purpose value of using annotations. Annotations are also a feasible and practical method to enable interoperability among models and modeling frameworks.
A Framework for Developing the Structure of Public Health Economic Models.
Squires, Hazel; Chilcott, James; Akehurst, Ronald; Burr, Jennifer; Kelly, Michael P
2016-01-01
A conceptual modeling framework is a methodology that assists modelers through the process of developing a model structure. Public health interventions tend to operate in dynamically complex systems. Modeling public health interventions requires broader considerations than clinical ones. Inappropriately simple models may lead to poor validity and credibility, resulting in suboptimal allocation of resources. This article presents the first conceptual modeling framework for public health economic evaluation. The framework presented here was informed by literature reviews of the key challenges in public health economic modeling and existing conceptual modeling frameworks; qualitative research to understand the experiences of modelers when developing public health economic models; and piloting a draft version of the framework. The conceptual modeling framework comprises four key principles of good practice and a proposed methodology. The key principles are that 1) a systems approach to modeling should be taken; 2) a documented understanding of the problem is imperative before and alongside developing and justifying the model structure; 3) strong communication with stakeholders and members of the team throughout model development is essential; and 4) a systematic consideration of the determinants of health is central to identifying the key impacts of public health interventions. The methodology consists of four phases: phase A, aligning the framework with the decision-making process; phase B, identifying relevant stakeholders; phase C, understanding the problem; and phase D, developing and justifying the model structure. Key areas for further research involve evaluation of the framework in diverse case studies and the development of methods for modeling individual and social behavior. This approach could improve the quality of Public Health economic models, supporting efficient allocation of scarce resources. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.
Liu, Y F; Yu, H; Wang, W N; Gao, B
2017-06-09
Objective: To evaluate the processing accuracy, internal quality and suitability of the titanium alloy frameworks of removable partial denture (RPD) fabricated by selective laser melting (SLM) technique, and to provide reference for clinical application. Methods: The plaster model of one clinical patient was used as the working model, and was scanned and reconstructed into a digital working model. A RPD framework was designed on it. Then, eight corresponding RPD frameworks were fabricated using SLM technique. Three-dimensional (3D) optical scanner was used to scan and obtain the 3D data of the frameworks and the data was compared with the original computer aided design (CAD) model to evaluate their processing precision. The traditional casting pure titanium frameworks was used as the control group, and the internal quality was analyzed by X-ray examination. Finally, the fitness of the frameworks was examined on the plaster model. Results: The overall average deviation of the titanium alloy RPD framework fabricated by SLM technology was (0.089±0.076) mm, the root mean square error was 0.103 mm. No visible pores, cracks and other internal defects was detected in the frameworks. The framework fits on the plaster model completely, and its tissue surface fitted on the plaster model well. There was no obvious movement. Conclusions: The titanium alloy RPD framework fabricated by SLM technology is of good quality.
Bergeron, Kim; Abdi, Samiya; DeCorby, Kara; Mensah, Gloria; Rempel, Benjamin; Manson, Heather
2017-11-28
There is limited research on capacity building interventions that include theoretical foundations. The purpose of this systematic review is to identify underlying theories, models and frameworks used to support capacity building interventions relevant to public health practice. The aim is to inform and improve capacity building practices and services offered by public health organizations. Four search strategies were used: 1) electronic database searching; 2) reference lists of included papers; 3) key informant consultation; and 4) grey literature searching. Inclusion and exclusion criteria are outlined with included papers focusing on capacity building, learning plans, professional development plans in combination with tools, resources, processes, procedures, steps, model, framework, guideline, described in a public health or healthcare setting, or non-government, government, or community organizations as they relate to healthcare, and explicitly or implicitly mention a theory, model and/or framework that grounds the type of capacity building approach developed. Quality assessment were performed on all included articles. Data analysis included a process for synthesizing, analyzing and presenting descriptive summaries, categorizing theoretical foundations according to which theory, model and/or framework was used and whether or not the theory, model or framework was implied or explicitly identified. Nineteen articles were included in this review. A total of 28 theories, models and frameworks were identified. Of this number, two theories (Diffusion of Innovations and Transformational Learning), two models (Ecological and Interactive Systems Framework for Dissemination and Implementation) and one framework (Bloom's Taxonomy of Learning) were identified as the most frequently cited. This review identifies specific theories, models and frameworks to support capacity building interventions relevant to public health organizations. It provides public health practitioners with a menu of potentially usable theories, models and frameworks to support capacity building efforts. The findings also support the need for the use of theories, models or frameworks to be intentional, explicitly identified, referenced and for it to be clearly outlined how they were applied to the capacity building intervention.
NASA Astrophysics Data System (ADS)
Peckham, S. D.; DeLuca, C.; Gochis, D. J.; Arrigo, J.; Kelbert, A.; Choi, E.; Dunlap, R.
2014-12-01
In order to better understand and predict environmental hazards of weather/climate, ecology and deep earth processes, geoscientists develop and use physics-based computational models. These models are used widely both in academic and federal communities. Because of the large effort required to develop and test models, there is widespread interest in component-based modeling, which promotes model reuse and simplified coupling to tackle problems that often cross discipline boundaries. In component-based modeling, the goal is to make relatively small changes to models that make it easy to reuse them as "plug-and-play" components. Sophisticated modeling frameworks exist to rapidly couple these components to create new composite models. They allow component models to exchange variables while accommodating different programming languages, computational grids, time-stepping schemes, variable names and units. Modeling frameworks have arisen in many modeling communities. CSDMS (Community Surface Dynamics Modeling System) serves the academic earth surface process dynamics community, while ESMF (Earth System Modeling Framework) serves many federal Earth system modeling projects. Others exist in both the academic and federal domains and each satisfies design criteria that are determined by the community they serve. While they may use different interface standards or semantic mediation strategies, they share fundamental similarities. The purpose of the Earth System Bridge project is to develop mechanisms for interoperability between modeling frameworks, such as the ability to share a model or service component. This project has three main goals: (1) Develop a Framework Description Language (ES-FDL) that allows modeling frameworks to be described in a standard way so that their differences and similarities can be assessed. (2) Demonstrate that if a model is augmented with a framework-agnostic Basic Model Interface (BMI), then simple, universal adapters can go from BMI to a modeling framework's native component interface. (3) Create semantic mappings between modeling frameworks that support semantic mediation. This third goal involves creating a crosswalk between the CF Standard Names and the CSDMS Standard Names (a set of naming conventions). This talk will summarize progress towards these goals.
A Model Independent S/W Framework for Search-Based Software Testing
Baik, Jongmoon
2014-01-01
In Model-Based Testing (MBT) area, Search-Based Software Testing (SBST) has been employed to generate test cases from the model of a system under test. However, many types of models have been used in MBT. If the type of a model has changed from one to another, all functions of a search technique must be reimplemented because the types of models are different even if the same search technique has been applied. It requires too much time and effort to implement the same algorithm over and over again. We propose a model-independent software framework for SBST, which can reduce redundant works. The framework provides a reusable common software platform to reduce time and effort. The software framework not only presents design patterns to find test cases for a target model but also reduces development time by using common functions provided in the framework. We show the effectiveness and efficiency of the proposed framework with two case studies. The framework improves the productivity by about 50% when changing the type of a model. PMID:25302314
Business model framework applications in health care: A systematic review.
Fredriksson, Jens Jacob; Mazzocato, Pamela; Muhammed, Rafiq; Savage, Carl
2017-11-01
It has proven to be a challenge for health care organizations to achieve the Triple Aim. In the business literature, business model frameworks have been used to understand how organizations are aligned to achieve their goals. We conducted a systematic literature review with an explanatory synthesis approach to understand how business model frameworks have been applied in health care. We found a large increase in applications of business model frameworks during the last decade. E-health was the most common context of application. We identified six applications of business model frameworks: business model description, financial assessment, classification based on pre-defined typologies, business model analysis, development, and evaluation. Our synthesis suggests that the choice of business model framework and constituent elements should be informed by the intent and context of application. We see a need for harmonization in the choice of elements in order to increase generalizability, simplify application, and help organizations realize the Triple Aim.
A Modular Simulation Framework for Assessing Swarm Search Models
2014-09-01
SUBTITLE A MODULAR SIMULATION FRAMEWORK FOR ASSESSING SWARM SEARCH MODELS 5. FUNDING NUMBERS 6. AUTHOR(S) Blake M. Wanier 7. PERFORMING ORGANIZATION...Numerical studies demonstrate the ability to leverage the developed simulation and analysis framework to investigate three canonical swarm search models ...as benchmarks for future exploration of more sophisticated swarm search scenarios. 14. SUBJECT TERMS Swarm Search, Search Theory, Modeling Framework
EPA'S NEW EMISSIONS MODELING FRAMEWORK
EPA's Office of Air Quality Planning and Standards is building a new Emissions Modeling Framework that will solve many of the long-standing difficulties of emissions modeling. The goals of the Framework are to (1) prevent bottlenecks and errors caused by emissions modeling activi...
Conceptual Frameworks in the Doctoral Research Process: A Pedagogical Model
ERIC Educational Resources Information Center
Berman, Jeanette; Smyth, Robyn
2015-01-01
This paper contributes to consideration of the role of conceptual frameworks in the doctoral research process. Through reflection on the two authors' own conceptual frameworks for their doctoral studies, a pedagogical model has been developed. The model posits the development of a conceptual framework as a core element of the doctoral…
Reduced vibration motor winding arrangement
Slavik, C.J.; Rhudy, R.G.; Bushman, R.E.
1997-11-11
An individual phase winding arrangement having a sixty electrical degree phase belt width for use with a three phase motor armature includes a delta connected phase winding portion and a wye connected phase winding portion. Both the delta and wye connected phase winding portions have a thirty electrical degree phase belt width. The delta and wye connected phase winding portions are each formed from a preselected number of individual coils each formed, in turn, from an unequal number of electrical conductor turns in the approximate ratio of {radical}3. The individual coils of the delta and wye connected phase winding portions may either be connected in series or parallel. This arrangement provides an armature winding for a three phase motor which retains the benefits of the widely known and utilized thirty degree phase belt concept, including improved mmf waveform and fundamental distribution factor, with consequent reduced vibrations and improved efficiency. 4 figs.
Is immunosuppressive therapy the anchor treatment to achieve remission in systemic sclerosis?
Cappelli, Susanna; Bellando-Randone, Silvia; Guiducci, Serena; Matucci-Cerinic, Marco
2014-06-01
Since activation of the immune system and a perivascular infiltrate of inflammatory cells are key features of SSc, immunosuppression has long been considered to be an anchor treatment. Non-selective immunosuppression remains central to the treatment of interstitial lung disease (ILD) and skin involvement, with CYC most widely used to obtain remission. The use of MTX as a first-line agent may be considered in the presence of skin involvement without ILD. More recently, MMF has shown encouraging results in observational studies, but still needs more formal evaluation to verify if it can be considered an alternative drug to CYC or a maintenance agent such as AZA. Rituximab has provided promising results in small open-label studies and other novel therapies targeting specific molecular and cellular targets are under evaluation. Patients with rapidly progressing diffuse cutaneous SSc should be evaluated for haematopoietic stem cell transplantation.
Segal, Yahel; Dahan, Shani; Sharif, Kassem; Bragazzi, Nicola Luigi; Watad, Abdulla; Amital, Howard
2018-05-01
Autoimmune Syndrome Induced by Adjuvant (ASIA) is a definition aimed to describe the common etiological process at the root of five clinical entities sharing similar symptomatology: macrophagic myofasciitis syndrome (MMF), Gulf War Syndrome (GWS), sick building syndrome (SBS), siliconosis, and post vaccination autoimmune phenomena. ASIA illustrates the role of environmental immune stimulating agents, or adjuvants, in the instigation of complex autoimmune reactions among individuals bearing a genetic preponderance for autoimmunity. The value of ASIA lies first in the acknowledgment it provides for patients suffering from these as yet ill-defined medical conditions. Equally important is the spotlight it sheds for further research of these poorly understood conditions sharing a common pathogenesis. In this article we elaborate on the significance of ASIA, review the current evidence in support of the syndrome, and address recent reservations raised regarding its validity. Copyright © 2018 Elsevier B.V. All rights reserved.
Durability of filament-wound composite flywheel rotors
NASA Astrophysics Data System (ADS)
Koyanagi, Jun
2012-02-01
This paper predicts the durability of two types of flywheels, one assumes to fail in the radial direction and the other assumes to fail in the circumferential direction. The flywheel failing in the radial direction is a conventional filament-wound composite flywheel and the one failing in the circumferential direction is a tailor-made type. The durability of the former is predicted by Micromechanics of Failure (MMF) (Ha et al. in J. Compos. Mater. 42:1873-1875, 2008), employing time-dependent matrix strength, and that of the latter is predicted by Simultaneous Fiber Failure (SFF) (Koyanagi et al. in J. Compos. Mater. 43:1901-1914, 2009), employing identical time-dependent matrix strength. The predicted durability of the latter is much greater than that of the former, depending on the interface strength. This study suggests that a relatively weak interface is necessary for high-durability composite flywheel fabrication.
Reduced vibration motor winding arrangement
Slavik, Charles J.; Rhudy, Ralph G.; Bushman, Ralph E.
1997-01-01
An individual phase winding arrangement having a sixty electrical degree phase belt width for use with a three phase motor armature includes a delta connected phase winding portion and a wye connected phase winding portion. Both the delta and wye connected phase winding portions have a thirty electrical degree phase belt width. The delta and wye connected phase winding portions are each formed from a preselected number of individual coils each formed, in turn, from an unequal number of electrical conductor turns in the approximate ratio of .sqroot.3. The individual coils of the delta and wye connected phase winding portions may either be connected in series or parallel. This arrangement provides an armature winding for a three phase motor which retains the benefits of the widely known and utilized thirty degree phase belt concept, including improved mmf waveform and fundamental distribution factor, with consequent reduced vibrations and improved efficiency.
Rethinking modeling framework design: object modeling system 3.0
USDA-ARS?s Scientific Manuscript database
The Object Modeling System (OMS) is a framework for environmental model development, data provisioning, testing, validation, and deployment. It provides a bridge for transferring technology from the research organization to the program delivery agency. The framework provides a consistent and efficie...
Retrofitting Non-Cognitive-Diagnostic Reading Assessment under the Generalized DINA Model Framework
ERIC Educational Resources Information Center
Chen, Huilin; Chen, Jinsong
2016-01-01
Cognitive diagnosis models (CDMs) are psychometric models developed mainly to assess examinees' specific strengths and weaknesses in a set of skills or attributes within a domain. By adopting the Generalized-DINA model framework, the recently developed general modeling framework, we attempted to retrofit the PISA reading assessments, a…
Model-Based Reasoning in the Physics Laboratory: Framework and Initial Results
ERIC Educational Resources Information Center
Zwickl, Benjamin M.; Hu, Dehui; Finkelstein, Noah; Lewandowski, H. J.
2015-01-01
We review and extend existing frameworks on modeling to develop a new framework that describes model-based reasoning in introductory and upper-division physics laboratories. Constructing and using models are core scientific practices that have gained significant attention within K-12 and higher education. Although modeling is a broadly applicable…
The Foundations Framework for Developing and Reporting New Models of Care for Multimorbidity
Stokes, Jonathan; Man, Mei-See; Guthrie, Bruce; Mercer, Stewart W.; Salisbury, Chris; Bower, Peter
2017-01-01
PURPOSE Multimorbidity challenges health systems globally. New models of care are urgently needed to better manage patients with multimorbidity; however, there is no agreed framework for designing and reporting models of care for multimorbidity and their evaluation. METHODS Based on findings from a literature search to identify models of care for multimorbidity, we developed a framework to describe these models. We illustrate the application of the framework by identifying the focus and gaps in current models of care, and by describing the evolution of models over time. RESULTS Our framework describes each model in terms of its theoretical basis and target population (the foundations of the model) and of the elements of care implemented to deliver the model. We categorized elements of care into 3 types: (1) clinical focus, (2) organization of care, (3) support for model delivery. Application of the framework identified a limited use of theory in model design and a strong focus on some patient groups (elderly, high users) more than others (younger patients, deprived populations). We found changes in elements with time, with a decrease in models implementing home care and an increase in models offering extended appointments. CONCLUSIONS By encouragin greater clarity about the underpinning theory and target population, and by categorizing the wide range of potentially important elements of an intervention to improve care for patients with multimorbidity, the framework may be useful in designing and reporting models of care and help advance the currently limited evidence base. PMID:29133498
BioASF: a framework for automatically generating executable pathway models specified in BioPAX.
Haydarlou, Reza; Jacobsen, Annika; Bonzanni, Nicola; Feenstra, K Anton; Abeln, Sanne; Heringa, Jaap
2016-06-15
Biological pathways play a key role in most cellular functions. To better understand these functions, diverse computational and cell biology researchers use biological pathway data for various analysis and modeling purposes. For specifying these biological pathways, a community of researchers has defined BioPAX and provided various tools for creating, validating and visualizing BioPAX models. However, a generic software framework for simulating BioPAX models is missing. Here, we attempt to fill this gap by introducing a generic simulation framework for BioPAX. The framework explicitly separates the execution model from the model structure as provided by BioPAX, with the advantage that the modelling process becomes more reproducible and intrinsically more modular; this ensures natural biological constraints are satisfied upon execution. The framework is based on the principles of discrete event systems and multi-agent systems, and is capable of automatically generating a hierarchical multi-agent system for a given BioPAX model. To demonstrate the applicability of the framework, we simulated two types of biological network models: a gene regulatory network modeling the haematopoietic stem cell regulators and a signal transduction network modeling the Wnt/β-catenin signaling pathway. We observed that the results of the simulations performed using our framework were entirely consistent with the simulation results reported by the researchers who developed the original models in a proprietary language. The framework, implemented in Java, is open source and its source code, documentation and tutorial are available at http://www.ibi.vu.nl/programs/BioASF CONTACT: j.heringa@vu.nl. © The Author 2016. Published by Oxford University Press.
Comparison and Contrast of Two General Functional Regression Modeling Frameworks
Morris, Jeffrey S.
2017-01-01
In this article, Greven and Scheipl describe an impressively general framework for performing functional regression that builds upon the generalized additive modeling framework. Over the past number of years, my collaborators and I have also been developing a general framework for functional regression, functional mixed models, which shares many similarities with this framework, but has many differences as well. In this discussion, I compare and contrast these two frameworks, to hopefully illuminate characteristics of each, highlighting their respecitve strengths and weaknesses, and providing recommendations regarding the settings in which each approach might be preferable. PMID:28736502
Comparison and Contrast of Two General Functional Regression Modeling Frameworks.
Morris, Jeffrey S
2017-02-01
In this article, Greven and Scheipl describe an impressively general framework for performing functional regression that builds upon the generalized additive modeling framework. Over the past number of years, my collaborators and I have also been developing a general framework for functional regression, functional mixed models, which shares many similarities with this framework, but has many differences as well. In this discussion, I compare and contrast these two frameworks, to hopefully illuminate characteristics of each, highlighting their respecitve strengths and weaknesses, and providing recommendations regarding the settings in which each approach might be preferable.
NASA Astrophysics Data System (ADS)
Ozel, A.; Yalcinkaya, E.; Guralp, C. M.; Tunc, S.; Meral Ozel, N.
2013-12-01
The main objective of this study is to install a multi-parameter borehole system and surface array as close to the main Marmara Fault (MMF) in the western Marmara Sea as possible, and measure continuously the evolution of the state of the fault zone surrounding the MMF and to detect any anomaly or change which may occur before earthquakes by making use of the data from the arrays already running in the eastern part of the Marmara Sea. The multi-parameter borehole system will be composed of very wide dynamic range and stable borehole (VBB) broad band seismic sensor, and incorporate 3-D strain meter, tilt meter, and temperature and local hydrostatic pressure measuring devices. The borehole seismic station will use the latest update technologies and design ideas to record 'Earth tides' signals to the smallest magnitude -3 events. Bringing face to face the seismograms of microearthquakes recorded by borehole and surface instruments portrays quite different contents. The shorter recording duration and nearly flat frequency spectrum up to the Nyquist frequencies of borehole records are faced with longer recording duration and rapid decay of spectral amplitudes at higher frequencies of a surface seismogram. The main causative of the observed differences are near surface geology effects that mask most of the source related information the seismograms include, and that give rise to scattering, generating longer duration seismograms. In view of these circumstances, studies on microearthquakes employing surface seismograms may bring on misleading results. Particularly, the works on earthquake physics and nucleation process of earthquakes requires elaborate analysis of tiny events. It is obvious from the studies on the nucleation process of the 1999 earthquake that tens of minutes before the major rupture initiate noteworthy microearthquake activity happened. The starting point of the 1999 rupture was a site of swarm activity noticed a few decades prior the main shock. Nowadays, analogous case is probable in western Marmara Sea region, prone to a major event in near future where the seismic activity is prevailing along the impending rupture zone. Deploying a borehole system eastern end of the Ganos fault zone may yield invaluable data to closely inspect and monitor the last stages of the preparation stage of major rupture. Keywords: Borehole seismometer; Ganos fault; microearthquakes; western Marmara
Teraoka, S; Nomoto, K; Kikuchi, K; Hirano, T; Satomi, S; Hasegawa, A; Uchida, K; Akiyama, T; Tanaka, S; Babazona, T; Shindo, K; Nakamura, N
2004-01-01
Between April 1995-December 2003, 1,324 deceased donor kidney transplantations were performed in 139 transplant institutes in Japan. Of these, 45 transplants were from heart-beating and 1,279 transplants were from non-heart-beating deceased donors (NHBDD). Clinical outcomes for the 1,279 recipients of NHBDD kidney transplants were investigated. The overall 5-year patient and graft survival rates were 90% and 72%, respectively. A total of 112 NHBDD kidney grafts never functioned after transplantation and the recipients had to remain on dialysis. The causes of nonfunction were rejection, primary nonfunction, death, thrombosis and others in the order of the incidence. The major causes of graft loss were nonfunction, death, chronic rejection and acute rejection in that order. Major causes of recipient deaths were pneumonia, sepsis and CVA within 12 months, and heart diseases, sepsis, malignancy and pneumonia more than 12 months after transplantation. Kidneys from female donors, donors aged 15 or less or over age 60, donors with extrinsic causes of death other than head trauma, recipients over age 60 and those with diabetic nephropathy as their original disease were found to be at risk for poor graft survival. The lowest and last donor serum creatinine level did not influence the incidence of nonfunction or graft survival. However, graft survival was significantly poorer among recipients of older "expanded" donor kidneys than for recipients of younger grafts. The warm and total ischemia times should be kept shorter than 30 minutes (better 15 minutes), and 12 hours, respectively to minimize the incidence of nonfunction and early graft loss. It is especially important in cases with WIT over 30 minutes that the total ischemia should be kept within 12 hours. Cannulation before cardiac standstill was important to reduce the incidence of nonfunction and achieve high graft survival rates with NHBDD kidneys. The discontinuance of ventilator support also reduced the incidence of graft nonfunction. The combination of CsA or Tacrolimus and MMF as both the induction and maintenance regimen significantly improved graft survival. The use of either anti-T cell antibodies or basiliximab was also associated with significantly better graft survival for NHBDD kidneys. The combination of basiliximab, CsA and MMF resulted in a graft survival rate of 98% at one and 2 years.
Enterprise application architecture development based on DoDAF and TOGAF
NASA Astrophysics Data System (ADS)
Tao, Zhi-Gang; Luo, Yun-Feng; Chen, Chang-Xin; Wang, Ming-Zhe; Ni, Feng
2017-05-01
For the purpose of supporting the design and analysis of enterprise application architecture, here, we report a tailored enterprise application architecture description framework and its corresponding design method. The presented framework can effectively support service-oriented architecting and cloud computing by creating the metadata model based on architecture content framework (ACF), DoDAF metamodel (DM2) and Cloud Computing Modelling Notation (CCMN). The framework also makes an effort to extend and improve the mapping between The Open Group Architecture Framework (TOGAF) application architectural inputs/outputs, deliverables and Department of Defence Architecture Framework (DoDAF)-described models. The roadmap of 52 DoDAF-described models is constructed by creating the metamodels of these described models and analysing the constraint relationship among metamodels. By combining the tailored framework and the roadmap, this article proposes a service-oriented enterprise application architecture development process. Finally, a case study is presented to illustrate the results of implementing the tailored framework in the Southern Base Management Support and Information Platform construction project using the development process proposed by the paper.
Wu, Zujian; Pang, Wei; Coghill, George M
2015-01-01
Both qualitative and quantitative model learning frameworks for biochemical systems have been studied in computational systems biology. In this research, after introducing two forms of pre-defined component patterns to represent biochemical models, we propose an integrative qualitative and quantitative modelling framework for inferring biochemical systems. In the proposed framework, interactions between reactants in the candidate models for a target biochemical system are evolved and eventually identified by the application of a qualitative model learning approach with an evolution strategy. Kinetic rates of the models generated from qualitative model learning are then further optimised by employing a quantitative approach with simulated annealing. Experimental results indicate that our proposed integrative framework is feasible to learn the relationships between biochemical reactants qualitatively and to make the model replicate the behaviours of the target system by optimising the kinetic rates quantitatively. Moreover, potential reactants of a target biochemical system can be discovered by hypothesising complex reactants in the synthetic models. Based on the biochemical models learned from the proposed framework, biologists can further perform experimental study in wet laboratory. In this way, natural biochemical systems can be better understood.
Koopman Operator Framework for Time Series Modeling and Analysis
NASA Astrophysics Data System (ADS)
Surana, Amit
2018-01-01
We propose an interdisciplinary framework for time series classification, forecasting, and anomaly detection by combining concepts from Koopman operator theory, machine learning, and linear systems and control theory. At the core of this framework is nonlinear dynamic generative modeling of time series using the Koopman operator which is an infinite-dimensional but linear operator. Rather than working with the underlying nonlinear model, we propose two simpler linear representations or model forms based on Koopman spectral properties. We show that these model forms are invariants of the generative model and can be readily identified directly from data using techniques for computing Koopman spectral properties without requiring the explicit knowledge of the generative model. We also introduce different notions of distances on the space of such model forms which is essential for model comparison/clustering. We employ the space of Koopman model forms equipped with distance in conjunction with classical machine learning techniques to develop a framework for automatic feature generation for time series classification. The forecasting/anomaly detection framework is based on using Koopman model forms along with classical linear systems and control approaches. We demonstrate the proposed framework for human activity classification, and for time series forecasting/anomaly detection in power grid application.
A Framework for Sharing and Integrating Remote Sensing and GIS Models Based on Web Service
Chen, Zeqiang; Lin, Hui; Chen, Min; Liu, Deer; Bao, Ying; Ding, Yulin
2014-01-01
Sharing and integrating Remote Sensing (RS) and Geographic Information System/Science (GIS) models are critical for developing practical application systems. Facilitating model sharing and model integration is a problem for model publishers and model users, respectively. To address this problem, a framework based on a Web service for sharing and integrating RS and GIS models is proposed in this paper. The fundamental idea of the framework is to publish heterogeneous RS and GIS models into standard Web services for sharing and interoperation and then to integrate the RS and GIS models using Web services. For the former, a “black box” and a visual method are employed to facilitate the publishing of the models as Web services. For the latter, model integration based on the geospatial workflow and semantic supported marching method is introduced. Under this framework, model sharing and integration is applied for developing the Pearl River Delta water environment monitoring system. The results show that the framework can facilitate model sharing and model integration for model publishers and model users. PMID:24901016
A framework for sharing and integrating remote sensing and GIS models based on Web service.
Chen, Zeqiang; Lin, Hui; Chen, Min; Liu, Deer; Bao, Ying; Ding, Yulin
2014-01-01
Sharing and integrating Remote Sensing (RS) and Geographic Information System/Science (GIS) models are critical for developing practical application systems. Facilitating model sharing and model integration is a problem for model publishers and model users, respectively. To address this problem, a framework based on a Web service for sharing and integrating RS and GIS models is proposed in this paper. The fundamental idea of the framework is to publish heterogeneous RS and GIS models into standard Web services for sharing and interoperation and then to integrate the RS and GIS models using Web services. For the former, a "black box" and a visual method are employed to facilitate the publishing of the models as Web services. For the latter, model integration based on the geospatial workflow and semantic supported marching method is introduced. Under this framework, model sharing and integration is applied for developing the Pearl River Delta water environment monitoring system. The results show that the framework can facilitate model sharing and model integration for model publishers and model users.
A modelling framework to simulate foliar fungal epidemics using functional–structural plant models
Garin, Guillaume; Fournier, Christian; Andrieu, Bruno; Houlès, Vianney; Robert, Corinne; Pradal, Christophe
2014-01-01
Background and Aims Sustainable agriculture requires the identification of new, environmentally responsible strategies of crop protection. Modelling of pathosystems can allow a better understanding of the major interactions inside these dynamic systems and may lead to innovative protection strategies. In particular, functional–structural plant models (FSPMs) have been identified as a means to optimize the use of architecture-related traits. A current limitation lies in the inherent complexity of this type of modelling, and thus the purpose of this paper is to provide a framework to both extend and simplify the modelling of pathosystems using FSPMs. Methods Different entities and interactions occurring in pathosystems were formalized in a conceptual model. A framework based on these concepts was then implemented within the open-source OpenAlea modelling platform, using the platform's general strategy of modelling plant–environment interactions and extending it to handle plant interactions with pathogens. New developments include a generic data structure for representing lesions and dispersal units, and a series of generic protocols to communicate with objects representing the canopy and its microenvironment in the OpenAlea platform. Another development is the addition of a library of elementary models involved in pathosystem modelling. Several plant and physical models are already available in OpenAlea and can be combined in models of pathosystems using this framework approach. Key Results Two contrasting pathosystems are implemented using the framework and illustrate its generic utility. Simulations demonstrate the framework's ability to simulate multiscaled interactions within pathosystems, and also show that models are modular components within the framework and can be extended. This is illustrated by testing the impact of canopy architectural traits on fungal dispersal. Conclusions This study provides a framework for modelling a large number of pathosystems using FSPMs. This structure can accommodate both previously developed models for individual aspects of pathosystems and new ones. Complex models are deconstructed into separate ‘knowledge sources’ originating from different specialist areas of expertise and these can be shared and reassembled into multidisciplinary models. The framework thus provides a beneficial tool for a potential diverse and dynamic research community. PMID:24925323
Documentation for the MODFLOW 6 framework
Hughes, Joseph D.; Langevin, Christian D.; Banta, Edward R.
2017-08-10
MODFLOW is a popular open-source groundwater flow model distributed by the U.S. Geological Survey. Growing interest in surface and groundwater interactions, local refinement with nested and unstructured grids, karst groundwater flow, solute transport, and saltwater intrusion, has led to the development of numerous MODFLOW versions. Often times, there are incompatibilities between these different MODFLOW versions. The report describes a new MODFLOW framework called MODFLOW 6 that is designed to support multiple models and multiple types of models. The framework is written in Fortran using a modular object-oriented design. The primary framework components include the simulation (or main program), Timing Module, Solutions, Models, Exchanges, and Utilities. The first version of the framework focuses on numerical solutions, numerical models, and numerical exchanges. This focus on numerical models allows multiple numerical models to be tightly coupled at the matrix level.
A conceptual modeling framework for discrete event simulation using hierarchical control structures.
Furian, N; O'Sullivan, M; Walker, C; Vössner, S; Neubacher, D
2015-08-01
Conceptual Modeling (CM) is a fundamental step in a simulation project. Nevertheless, it is only recently that structured approaches towards the definition and formulation of conceptual models have gained importance in the Discrete Event Simulation (DES) community. As a consequence, frameworks and guidelines for applying CM to DES have emerged and discussion of CM for DES is increasing. However, both the organization of model-components and the identification of behavior and system control from standard CM approaches have shortcomings that limit CM's applicability to DES. Therefore, we discuss the different aspects of previous CM frameworks and identify their limitations. Further, we present the Hierarchical Control Conceptual Modeling framework that pays more attention to the identification of a models' system behavior, control policies and dispatching routines and their structured representation within a conceptual model. The framework guides the user step-by-step through the modeling process and is illustrated by a worked example.
A framework for modelling the complexities of food and water security under globalisation
NASA Astrophysics Data System (ADS)
Dermody, Brian J.; Sivapalan, Murugesu; Stehfest, Elke; van Vuuren, Detlef P.; Wassen, Martin J.; Bierkens, Marc F. P.; Dekker, Stefan C.
2018-01-01
We present a new framework for modelling the complexities of food and water security under globalisation. The framework sets out a method to capture regional and sectoral interdependencies and cross-scale feedbacks within the global food system that contribute to emergent water use patterns. The framework integrates aspects of existing models and approaches in the fields of hydrology and integrated assessment modelling. The core of the framework is a multi-agent network of city agents connected by infrastructural trade networks. Agents receive socio-economic and environmental constraint information from integrated assessment models and hydrological models respectively and simulate complex, socio-environmental dynamics that operate within those constraints. The emergent changes in food and water resources are aggregated and fed back to the original models with minimal modification of the structure of those models. It is our conviction that the framework presented can form the basis for a new wave of decision tools that capture complex socio-environmental change within our globalised world. In doing so they will contribute to illuminating pathways towards a sustainable future for humans, ecosystems and the water they share.
DOT National Transportation Integrated Search
1993-12-01
This report presents a comprehensive modeling framework for user responses to Advanced Traveler Information Systems (ATIS) services and identifies the data needs for the validation of such a framework. The authors present overviews of the framework b...
Models of Recognition, Repetition Priming, and Fluency : Exploring a New Framework
ERIC Educational Resources Information Center
Berry, Christopher J.; Shanks, David R.; Speekenbrink, Maarten; Henson, Richard N. A.
2012-01-01
We present a new modeling framework for recognition memory and repetition priming based on signal detection theory. We use this framework to specify and test the predictions of 4 models: (a) a single-system (SS) model, in which one continuous memory signal drives recognition and priming; (b) a multiple-systems-1 (MS1) model, in which completely…
NASA Astrophysics Data System (ADS)
Halbe, Johannes; Pahl-Wostl, Claudia; Adamowski, Jan
2018-01-01
Multiple barriers constrain the widespread application of participatory methods in water management, including the more technical focus of most water agencies, additional cost and time requirements for stakeholder involvement, as well as institutional structures that impede collaborative management. This paper presents a stepwise methodological framework that addresses the challenges of context-sensitive initiation, design and institutionalization of participatory modeling processes. The methodological framework consists of five successive stages: (1) problem framing and stakeholder analysis, (2) process design, (3) individual modeling, (4) group model building, and (5) institutionalized participatory modeling. The Management and Transition Framework is used for problem diagnosis (Stage One), context-sensitive process design (Stage Two) and analysis of requirements for the institutionalization of participatory water management (Stage Five). Conceptual modeling is used to initiate participatory modeling processes (Stage Three) and ensure a high compatibility with quantitative modeling approaches (Stage Four). This paper describes the proposed participatory model building (PMB) framework and provides a case study of its application in Québec, Canada. The results of the Québec study demonstrate the applicability of the PMB framework for initiating and designing participatory model building processes and analyzing barriers towards institutionalization.
Developing a theoretical framework for complex community-based interventions.
Angeles, Ricardo N; Dolovich, Lisa; Kaczorowski, Janusz; Thabane, Lehana
2014-01-01
Applying existing theories to research, in the form of a theoretical framework, is necessary to advance knowledge from what is already known toward the next steps to be taken. This article proposes a guide on how to develop a theoretical framework for complex community-based interventions using the Cardiovascular Health Awareness Program as an example. Developing a theoretical framework starts with identifying the intervention's essential elements. Subsequent steps include the following: (a) identifying and defining the different variables (independent, dependent, mediating/intervening, moderating, and control); (b) postulating mechanisms how the independent variables will lead to the dependent variables; (c) identifying existing theoretical models supporting the theoretical framework under development; (d) scripting the theoretical framework into a figure or sets of statements as a series of hypotheses, if/then logic statements, or a visual model; (e) content and face validation of the theoretical framework; and (f) revising the theoretical framework. In our example, we combined the "diffusion of innovation theory" and the "health belief model" to develop our framework. Using the Cardiovascular Health Awareness Program as the model, we demonstrated a stepwise process of developing a theoretical framework. The challenges encountered are described, and an overview of the strategies employed to overcome these challenges is presented.
Borycki, E M; Kushniruk, A W; Bellwood, P; Brender, J
2012-01-01
The objective of this paper is to examine the extent, range and scope to which frameworks, models and theories dealing with technology-induced error have arisen in the biomedical and life sciences literature as indexed by Medline®. To better understand the state of work in the area of technology-induced error involving frameworks, models and theories, the authors conducted a search of Medline® using selected key words identified from seminal articles in this research area. Articles were reviewed and those pertaining to frameworks, models or theories dealing with technology-induced error were further reviewed by two researchers. All articles from Medline® from its inception to April of 2011 were searched using the above outlined strategy. 239 citations were returned. Each of the abstracts for the 239 citations were reviewed by two researchers. Eleven articles met the criteria based on abstract review. These 11 articles were downloaded for further in-depth review. The majority of the articles obtained describe frameworks and models with reference to theories developed in other literatures outside of healthcare. The papers were grouped into several areas. It was found that articles drew mainly from three literatures: 1) the human factors literature (including human-computer interaction and cognition), 2) the organizational behavior/sociotechnical literature, and 3) the software engineering literature. A variety of frameworks and models were found in the biomedical and life sciences literatures. These frameworks and models drew upon and extended frameworks, models and theoretical perspectives that have emerged in other literatures. These frameworks and models are informing an emerging line of research in health and biomedical informatics involving technology-induced errors in healthcare.
Template-Based Geometric Simulation of Flexible Frameworks
Wells, Stephen A.; Sartbaeva, Asel
2012-01-01
Specialised modelling and simulation methods implementing simplified physical models are valuable generators of insight. Template-based geometric simulation is a specialised method for modelling flexible framework structures made up of rigid units. We review the background, development and implementation of the method, and its applications to the study of framework materials such as zeolites and perovskites. The “flexibility window” property of zeolite frameworks is a particularly significant discovery made using geometric simulation. Software implementing geometric simulation of framework materials, “GASP”, is freely available to researchers. PMID:28817055
A flexible framework has been created for modeling multi-dimensional hydrological and water quality processes within stormwater green infrastructures (GIs). The framework models a GI system using a set of blocks (spatial features) and connectors (interfaces) representing differen...
A series of case studies is presented focusing on multimedia/multipathway population exposures to arsenic, employing the Population Based Modeling approach of the MENTOR (Modeling Environment for Total Risks) framework. This framework considers currently five exposure routes: i...
Space-Time Processing for Tactical Mobile Ad Hoc Networks
2008-08-01
vision for multiple concurrent communication settings, i.e., a many-to-many framework where multi-packet transmissions (MPTs) and multi-packet...modelling framework of capacity-delay tradeoffs We have introduced the first unified modeling framework for the computation of fundamental limits o We...dalities in wireless n twor i-packet modelling framework to account for the use of m lti-packet reception (MPR) f ad hoc networks with MPT under
Medical imaging feasibility in body fluids using Markov chains
NASA Astrophysics Data System (ADS)
Kavehrad, M.; Armstrong, A. D.
2017-02-01
A relatively wide field-of-view and high resolution imaging is necessary for navigating the scope within the body, inspecting tissue, diagnosing disease, and guiding surgical interventions. As the large number of modes available in the multimode fibers (MMF) provides higher resolution, MMFs could replace the millimeters-thick bundles of fibers and lenses currently used in endoscopes. However, attributes of body fluids and obscurants such as blood, impose perennial limitations on resolution and reliability of optical imaging inside human body. To design and evaluate optimum imaging techniques that operate under realistic body fluids conditions, a good understanding of the channel (medium) behavior is necessary. In most prior works, Monte-Carlo Ray Tracing (MCRT) algorithm has been used to analyze the channel behavior. This task is quite numerically intensive. The focus of this paper is on investigating the possibility of simplifying this task by a direct extraction of state transition matrices associated with standard Markov modeling from the MCRT computer simulations programs. We show that by tracing a photon's trajectory in the body fluids via a Markov chain model, the angular distribution can be calculated by simple matrix multiplications. We also demonstrate that the new approach produces result that are close to those obtained by MCRT and other known methods. Furthermore, considering the fact that angular, spatial, and temporal distributions of energy are inter-related, mixing time of Monte- Carlo Markov Chain (MCMC) for different types of liquid concentrations is calculated based on Eigen-analysis of the state transition matrix and possibility of imaging in scattering media are investigated. To this end, we have started to characterize the body fluids that reduce the resolution of imaging [1].
Deltombe, Clement; Gillaizeau, Florence; Anglicheau, Daniel; Morelon, Emmanuel; Trébern-Launay, Katy; Le Borgne, Florent; Rimbert, Marie; Guérif, Pierrick; Malard-Castagnet, Stéphanie; Foucher, Yohann; Giral, Magali
2017-11-01
We aimed to assess the correlation of anti-angiotensin II type 1 receptor antibodies (anti-AT1R-Abs) before transplantation on a multicentric cohort of kidney transplant recipients (2008-2012), under tacrolimus and mycophenolate mofetil (MMF), screened by Luminex technology for anti-HLA immunization. Anti-AT1R antibody levels were measured by ELISA in pretransplantation sera of 940 kidney recipients from three French centers of the DIVAT cohort. Multivariable Cox models estimated the association between pretransplant anti-angiotensin II type 1 receptor antibodies and time to acute rejection episodes (ARE) or time to graft failure. Within our cohort, 387 patients (41.2%) had pretransplant AT1R-Abs higher than 10 U/ml and only 8% (72/970) greater than 17 U/ml. The cumulative probability of clinically relevant (cr)-ARE was 22.5% at 1 year post-transplantation [95% CI (19.9-25.4%)]. The cumulative probability of graft failure and patient death were 10.6% [95% CI (8.4-13.3%)] and 5.7% [95% CI (4.0-8.1%)] at 3 years post-transplantation, respectively. Multivariate Cox models indicated that pretransplant anti-AT1R antibody levels higher than 10 U/ml were not significantly independently associated with higher risks of acute rejection episodes [HR = 1.04, 95% CI (0.80-1.35)] nor with risk of graft failure [HR = 0.86, 95% CI (0.56-1.33)]. Our study did not confirm an association between pretransplant anti-AT1R antibody levels and kidney transplant outcomes. © 2017 Steunstichting ESOT.
A conceptual modeling framework for discrete event simulation using hierarchical control structures
Furian, N.; O’Sullivan, M.; Walker, C.; Vössner, S.; Neubacher, D.
2015-01-01
Conceptual Modeling (CM) is a fundamental step in a simulation project. Nevertheless, it is only recently that structured approaches towards the definition and formulation of conceptual models have gained importance in the Discrete Event Simulation (DES) community. As a consequence, frameworks and guidelines for applying CM to DES have emerged and discussion of CM for DES is increasing. However, both the organization of model-components and the identification of behavior and system control from standard CM approaches have shortcomings that limit CM’s applicability to DES. Therefore, we discuss the different aspects of previous CM frameworks and identify their limitations. Further, we present the Hierarchical Control Conceptual Modeling framework that pays more attention to the identification of a models’ system behavior, control policies and dispatching routines and their structured representation within a conceptual model. The framework guides the user step-by-step through the modeling process and is illustrated by a worked example. PMID:26778940
USDA-ARS?s Scientific Manuscript database
AgroEcoSystem-Watershed (AgES-W) is a modular, Java-based spatially distributed model which implements hydrologic and water quality (H/WQ) simulation components under the Java Connection Framework (JCF) and the Object Modeling System (OMS) environmental modeling framework. AgES-W is implicitly scala...
NASA Technical Reports Server (NTRS)
Talbot, Bryan; Zhou, Shu-Jia; Higgins, Glenn; Zukor, Dorothy (Technical Monitor)
2002-01-01
One of the most significant challenges in large-scale climate modeling, as well as in high-performance computing in other scientific fields, is that of effectively integrating many software models from multiple contributors. A software framework facilitates the integration task, both in the development and runtime stages of the simulation. Effective software frameworks reduce the programming burden for the investigators, freeing them to focus more on the science and less on the parallel communication implementation. while maintaining high performance across numerous supercomputer and workstation architectures. This document surveys numerous software frameworks for potential use in Earth science modeling. Several frameworks are evaluated in depth, including Parallel Object-Oriented Methods and Applications (POOMA), Cactus (from (he relativistic physics community), Overture, Goddard Earth Modeling System (GEMS), the National Center for Atmospheric Research Flux Coupler, and UCLA/UCB Distributed Data Broker (DDB). Frameworks evaluated in less detail include ROOT, Parallel Application Workspace (PAWS), and Advanced Large-Scale Integrated Computational Environment (ALICE). A host of other frameworks and related tools are referenced in this context. The frameworks are evaluated individually and also compared with each other.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Margevicius, Kristen J.; Generous, Nicholas; Abeyta, Esteban
Epidemiological modeling for infectious disease is important for disease management and its routine implementation needs to be facilitated through better description of models in an operational context. A standardized model characterization process that allows selection or making manual comparisons of available models and their results is currently lacking. A key need is a universal framework to facilitate model description and understanding of its features. Los Alamos National Laboratory (LANL) has developed a comprehensive framework that can be used to characterize an infectious disease model in an operational context. The framework was developed through a consensus among a panel of subjectmore » matter experts. In this paper, we describe the framework, its application to model characterization, and the development of the Biosurveillance Analytics Resource Directory (BARD; http://brd.bsvgateway.org/brd/), to facilitate the rapid selection of operational models for specific infectious/communicable diseases. We offer this framework and associated database to stakeholders of the infectious disease modeling field as a tool for standardizing model description and facilitating the use of epidemiological models.« less
Margevicius, Kristen J; Generous, Nicholas; Abeyta, Esteban; Althouse, Ben; Burkom, Howard; Castro, Lauren; Daughton, Ashlynn; Del Valle, Sara Y.; Fairchild, Geoffrey; Hyman, James M.; Kiang, Richard; Morse, Andrew P.; Pancerella, Carmen M.; Pullum, Laura; Ramanathan, Arvind; Schlegelmilch, Jeffrey; Scott, Aaron; Taylor-McCabe, Kirsten J; Vespignani, Alessandro; Deshpande, Alina
2016-01-01
Epidemiological modeling for infectious disease is important for disease management and its routine implementation needs to be facilitated through better description of models in an operational context. A standardized model characterization process that allows selection or making manual comparisons of available models and their results is currently lacking. A key need is a universal framework to facilitate model description and understanding of its features. Los Alamos National Laboratory (LANL) has developed a comprehensive framework that can be used to characterize an infectious disease model in an operational context. The framework was developed through a consensus among a panel of subject matter experts. In this paper, we describe the framework, its application to model characterization, and the development of the Biosurveillance Analytics Resource Directory (BARD; http://brd.bsvgateway.org/brd/), to facilitate the rapid selection of operational models for specific infectious/communicable diseases. We offer this framework and associated database to stakeholders of the infectious disease modeling field as a tool for standardizing model description and facilitating the use of epidemiological models. PMID:26820405
Margevicius, Kristen J; Generous, Nicholas; Abeyta, Esteban; Althouse, Ben; Burkom, Howard; Castro, Lauren; Daughton, Ashlynn; Del Valle, Sara Y; Fairchild, Geoffrey; Hyman, James M; Kiang, Richard; Morse, Andrew P; Pancerella, Carmen M; Pullum, Laura; Ramanathan, Arvind; Schlegelmilch, Jeffrey; Scott, Aaron; Taylor-McCabe, Kirsten J; Vespignani, Alessandro; Deshpande, Alina
2016-01-01
Epidemiological modeling for infectious disease is important for disease management and its routine implementation needs to be facilitated through better description of models in an operational context. A standardized model characterization process that allows selection or making manual comparisons of available models and their results is currently lacking. A key need is a universal framework to facilitate model description and understanding of its features. Los Alamos National Laboratory (LANL) has developed a comprehensive framework that can be used to characterize an infectious disease model in an operational context. The framework was developed through a consensus among a panel of subject matter experts. In this paper, we describe the framework, its application to model characterization, and the development of the Biosurveillance Analytics Resource Directory (BARD; http://brd.bsvgateway.org/brd/), to facilitate the rapid selection of operational models for specific infectious/communicable diseases. We offer this framework and associated database to stakeholders of the infectious disease modeling field as a tool for standardizing model description and facilitating the use of epidemiological models.
Margevicius, Kristen J.; Generous, Nicholas; Abeyta, Esteban; ...
2016-01-28
Epidemiological modeling for infectious disease is important for disease management and its routine implementation needs to be facilitated through better description of models in an operational context. A standardized model characterization process that allows selection or making manual comparisons of available models and their results is currently lacking. A key need is a universal framework to facilitate model description and understanding of its features. Los Alamos National Laboratory (LANL) has developed a comprehensive framework that can be used to characterize an infectious disease model in an operational context. The framework was developed through a consensus among a panel of subjectmore » matter experts. In this paper, we describe the framework, its application to model characterization, and the development of the Biosurveillance Analytics Resource Directory (BARD; http://brd.bsvgateway.org/brd/), to facilitate the rapid selection of operational models for specific infectious/communicable diseases. We offer this framework and associated database to stakeholders of the infectious disease modeling field as a tool for standardizing model description and facilitating the use of epidemiological models.« less
A generic framework for individual-based modelling and physical-biological interaction
2018-01-01
The increased availability of high-resolution ocean data globally has enabled more detailed analyses of physical-biological interactions and their consequences to the ecosystem. We present IBMlib, which is a versatile, portable and computationally effective framework for conducting Lagrangian simulations in the marine environment. The purpose of the framework is to handle complex individual-level biological models of organisms, combined with realistic 3D oceanographic model of physics and biogeochemistry describing the environment of the organisms without assumptions about spatial or temporal scales. The open-source framework features a minimal robust interface to facilitate the coupling between individual-level biological models and oceanographic models, and we provide application examples including forward/backward simulations, habitat connectivity calculations, assessing ocean conditions, comparison of physical circulation models, model ensemble runs and recently posterior Eulerian simulations using the IBMlib framework. We present the code design ideas behind the longevity of the code, our implementation experiences, as well as code performance benchmarking. The framework may contribute substantially to progresses in representing, understanding, predicting and eventually managing marine ecosystems. PMID:29351280
Modeling Synergistic Drug Inhibition of Mycobacterium tuberculosis Growth in Murine Macrophages
2011-01-01
important application of metabolic network modeling is the ability to quantitatively model metabolic enzyme inhibition and predict bacterial growth...describe the extensions of this framework to model drug- induced growth inhibition of M. tuberculosis in macrophages.39 Mathematical framework Fig. 1 shows...starting point, we used the previously developed iNJ661v model to represent the metabolic Fig. 1 Mathematical framework: a set of coupled models used to
We demonstrate an Integrated Modeling Framework that predicts the state of freshwater ecosystem services within the Albemarle-Pamlico Basins. The Framework consists of three facilitating technologies: Data for Environmental Modeling (D4EM) that automates the collection and standa...
We demonstrate an Integrated Modeling Framework that predicts the state of freshwater ecosystem services within the Albemarle-Pamlico Basins. The Framework consists of three facilitating technologies: Data for Environmental Modeling (D4EM) that automates the collection and standa...
NASA Technical Reports Server (NTRS)
Talbot, Bryan; Zhou, Shu-Jia; Higgins, Glenn
2002-01-01
One of the most significant challenges in large-scale climate modeling, as well as in high-performance computing in other scientific fields, is that of effectively integrating many software models from multiple contributors. A software framework facilitates the integration task. both in the development and runtime stages of the simulation. Effective software frameworks reduce the programming burden for the investigators, freeing them to focus more on the science and less on the parallel communication implementation, while maintaining high performance across numerous supercomputer and workstation architectures. This document proposes a strawman framework design for the climate community based on the integration of Cactus, from the relativistic physics community, and UCLA/UCB Distributed Data Broker (DDB) from the climate community. This design is the result of an extensive survey of climate models and frameworks in the climate community as well as frameworks from many other scientific communities. The design addresses fundamental development and runtime needs using Cactus, a framework with interfaces for FORTRAN and C-based languages, and high-performance model communication needs using DDB. This document also specifically explores object-oriented design issues in the context of climate modeling as well as climate modeling issues in terms of object-oriented design.
Advanced Computational Framework for Environmental Management ZEM, Version 1.x
DOE Office of Scientific and Technical Information (OSTI.GOV)
Vesselinov, Velimir V.; O'Malley, Daniel; Pandey, Sachin
2016-11-04
Typically environmental management problems require analysis of large and complex data sets originating from concurrent data streams with different data collection frequencies and pedigree. These big data sets require on-the-fly integration into a series of models with different complexity for various types of model analyses where the data are applied as soft and hard model constraints. This is needed to provide fast iterative model analyses based on the latest available data to guide decision-making. Furthermore, the data and model are associated with uncertainties. The uncertainties are probabilistic (e.g. measurement errors) and non-probabilistic (unknowns, e.g. alternative conceptual models characterizing site conditions).more » To address all of these issues, we have developed an integrated framework for real-time data and model analyses for environmental decision-making called ZEM. The framework allows for seamless and on-the-fly integration of data and modeling results for robust and scientifically-defensible decision-making applying advanced decision analyses tools such as Bayesian- Information-Gap Decision Theory (BIG-DT). The framework also includes advanced methods for optimization that are capable of dealing with a large number of unknown model parameters, and surrogate (reduced order) modeling capabilities based on support vector regression techniques. The framework is coded in Julia, a state-of-the-art high-performance programing language (http://julialang.org). The ZEM framework is open-source and can be applied to any environmental management site. The framework will be open-source and released under GPL V3 license.« less
Model-Based Reasoning in Upper-division Lab Courses
NASA Astrophysics Data System (ADS)
Lewandowski, Heather
2015-05-01
Modeling, which includes developing, testing, and refining models, is a central activity in physics. Well-known examples from AMO physics include everything from the Bohr model of the hydrogen atom to the Bose-Hubbard model of interacting bosons in a lattice. Modeling, while typically considered a theoretical activity, is most fully represented in the laboratory where measurements of real phenomena intersect with theoretical models, leading to refinement of models and experimental apparatus. However, experimental physicists use models in complex ways and the process is often not made explicit in physics laboratory courses. We have developed a framework to describe the modeling process in physics laboratory activities. The framework attempts to abstract and simplify the complex modeling process undertaken by expert experimentalists. The framework can be applied to understand typical processes such the modeling of the measurement tools, modeling ``black boxes,'' and signal processing. We demonstrate that the framework captures several important features of model-based reasoning in a way that can reveal common student difficulties in the lab and guide the development of curricula that emphasize modeling in the laboratory. We also use the framework to examine troubleshooting in the lab and guide students to effective methods and strategies.
A Simulation and Modeling Framework for Space Situational Awareness
DOE Office of Scientific and Technical Information (OSTI.GOV)
Olivier, S S
This paper describes the development and initial demonstration of a new, integrated modeling and simulation framework, encompassing the space situational awareness enterprise, for quantitatively assessing the benefit of specific sensor systems, technologies and data analysis techniques. The framework is based on a flexible, scalable architecture to enable efficient, physics-based simulation of the current SSA enterprise, and to accommodate future advancements in SSA systems. In particular, the code is designed to take advantage of massively parallel computer systems available, for example, at Lawrence Livermore National Laboratory. The details of the modeling and simulation framework are described, including hydrodynamic models of satellitemore » intercept and debris generation, orbital propagation algorithms, radar cross section calculations, optical brightness calculations, generic radar system models, generic optical system models, specific Space Surveillance Network models, object detection algorithms, orbit determination algorithms, and visualization tools. The use of this integrated simulation and modeling framework on a specific scenario involving space debris is demonstrated.« less
Frameworks for Assessing the Quality of Modeling and Simulation Capabilities
NASA Astrophysics Data System (ADS)
Rider, W. J.
2012-12-01
The importance of assuring quality in modeling and simulation has spawned several frameworks for structuring the examination of quality. The format and content of these frameworks provides an emphasis, completeness and flow to assessment activities. I will examine four frameworks that have been developed and describe how they can be improved and applied to a broader set of high consequence applications. Perhaps the first of these frameworks was known as CSAU [Boyack] (code scaling, applicability and uncertainty) used for nuclear reactor safety and endorsed the United States' Nuclear Regulatory Commission (USNRC). This framework was shaped by nuclear safety practice, and the practical structure needed after the Three Mile Island accident. It incorporated the dominant experimental program, the dominant analysis approach, and concerns about the quality of modeling. The USNRC gave it the force of law that made the nuclear industry take it seriously. After the cessation of nuclear weapons' testing the United States began a program of examining the reliability of these weapons without testing. This program utilizes science including theory, modeling, simulation and experimentation to replace the underground testing. The emphasis on modeling and simulation necessitated attention on the quality of these simulations. Sandia developed the PCMM (predictive capability maturity model) to structure this attention [Oberkampf]. PCMM divides simulation into six core activities to be examined and graded relative to the needs of the modeling activity. NASA [NASA] has built yet another framework in response to the tragedy of the space shuttle accidents. Finally, Ben-Haim and Hemez focus upon modeling robustness and predictive fidelity in another approach. These frameworks are similar, and applied in a similar fashion. The adoption of these frameworks at Sandia and NASA has been slow and arduous because the force of law has not assisted acceptance. All existing frameworks are incomplete and need to be extended incorporating elements from the other as well as new elements related to how models are solved, and how the model will be applied. I will describe this merger of approach and how it should be applied. The problems in adoption are related to basic human nature in that no one likes to be graded, or told they are not sufficiently quality oriented. Rather than engage in an adversarial role, I suggest that the frameworks be viewed as a collaborative tool. Instead these frameworks should be used to structure collaborations that can be used to assist the modeling and simulation efforts to be high quality. The framework provides a comprehensive setting of modeling and simulation themes that should be explored in providing high quality. W. Oberkampf, M. Pilch, and T. Trucano, Predictive Capability Maturity Model for Computational Modeling and Simulation, SAND2007-5948, 2007. B. Boyack, Quantifying Reactor Safety Margins Part 1: An Overview of the Code Scaling, Applicability, and Uncertainty Evaluation Methodology, Nuc. Eng. Design, 119, pp. 1-15, 1990. National Aeronautics and Space Administration, STANDARD FOR MODELS AND SIMULATIONS, NASA-STD-7009, 2008. Y. Ben-Haim and F. Hemez, Robustness, fidelity and prediction-looseness of models, Proc. R. Soc. A (2012) 468, 227-244.
PACS/information systems interoperability using Enterprise Communication Framework.
alSafadi, Y; Lord, W P; Mankovich, N J
1998-06-01
Interoperability among healthcare applications goes beyond connectivity to allow components to exchange structured information and work together in a predictable, coordinated fashion. To facilitate building an interoperability infrastructure, an Enterprise Communication Framework (ECF) was developed by the members of the Andover Working Group for Healthcare Interoperability (AWG-OHI). The ECF consists of four models: 1) Use Case Model, 2) Domain Information Model (DIM), 3) Interaction Model, and 4) Message Model. To realize this framework, a software component called the Enterprise Communicator (EC) is used. In this paper, we will demonstrate the use of the framework in interoperating a picture archiving and communication system (PACS) with a radiology information system (RIS).
ERIC Educational Resources Information Center
Grimm, Kevin; Zhang, Zhiyong; Hamagami, Fumiaki; Mazzocco, Michele
2013-01-01
We propose the use of the latent change and latent acceleration frameworks for modeling nonlinear growth in structural equation models. Moving to these frameworks allows for the direct identification of "rates of change" and "acceleration" in latent growth curves--information available indirectly through traditional growth…
The Smoothed Dirichlet Distribution: Understanding Cross-Entropy Ranking in Information Retrieval
2006-07-01
reflect those of the spon- sor. viii ABSTRACT Unigram Language modeling is a successful probabilistic framework for Information Retrieval (IR) that uses...the Relevance model (RM), a state-of-the-art model for IR in the language modeling framework that uses the same cross-entropy as its ranking function...In addition, the SD based classifier provides more flexibility than RM in modeling documents owing to a consistent generative framework . We
Modelling Participatory Geographic Information System for Customary Land Conflict Resolution
NASA Astrophysics Data System (ADS)
Gyamera, E. A.; Arko-Adjei, A.; Duncan, E. E.; Kuma, J. S. Y.
2017-11-01
Since land contributes to about 73 % of most countries Gross Domestic Product (GDP), attention on land rights have tremendously increased globally. Conflicts over land have therefore become part of the major problems associated with land administration. However, the conventional mechanisms for land conflict resolution do not provide satisfactory result to disputants due to various factors. This study sought to develop a Framework of using Participatory Geographic Information System (PGIS) for customary land conflict resolution. The framework was modelled using Unified Modelling Language (UML). The PGIS framework, called butterfly model, consists of three units namely, Social Unit (SU), Technical Unit (TU) and Decision Making Unit (DMU). The name butterfly model for land conflict resolution was adopted for the framework based on its features and properties. The framework has therefore been recommended to be adopted for land conflict resolution in customary areas.
NASA Technical Reports Server (NTRS)
1977-01-01
The development of a framework and structure for shuttle era unmanned spacecraft projects and the development of a commonality evaluation model is documented. The methodology developed for model utilization in performing cost trades and comparative evaluations for commonality studies is discussed. The model framework consists of categories of activities associated with the spacecraft system's development process. The model structure describes the physical elements to be treated as separate identifiable entities. Cost estimating relationships for subsystem and program-level components were calculated.
An Illustrative Guide to the Minerva Framework
NASA Astrophysics Data System (ADS)
Flom, Erik; Leonard, Patrick; Hoeffel, Udo; Kwak, Sehyun; Pavone, Andrea; Svensson, Jakob; Krychowiak, Maciej; Wendelstein 7-X Team Collaboration
2017-10-01
Modern phsyics experiments require tracking and modelling data and their associated uncertainties on a large scale, as well as the combined implementation of multiple independent data streams for sophisticated modelling and analysis. The Minerva Framework offers a centralized, user-friendly method of large-scale physics modelling and scientific inference. Currently used by teams at multiple large-scale fusion experiments including the Joint European Torus (JET) and Wendelstein 7-X (W7-X), the Minerva framework provides a forward-model friendly architecture for developing and implementing models for large-scale experiments. One aspect of the framework involves so-called data sources, which are nodes in the graphical model. These nodes are supplied with engineering and physics parameters. When end-user level code calls a node, it is checked network-wide against its dependent nodes for changes since its last implementation and returns version-specific data. Here, a filterscope data node is used as an illustrative example of the Minerva Framework's data management structure and its further application to Bayesian modelling of complex systems. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under Grant Agreement No. 633053.
NASA Technical Reports Server (NTRS)
Kim, E.; Tedesco, M.; Reichle, R.; Choudhury, B.; Peters-Lidard C.; Foster, J.; Hall, D.; Riggs, G.
2006-01-01
Microwave-based retrievals of snow parameters from satellite observations have a long heritage and have so far been generated primarily by regression-based empirical "inversion" methods based on snapshots in time. Direct assimilation of microwave radiance into physical land surface models can be used to avoid errors associated with such retrieval/inversion methods, instead utilizing more straightforward forward models and temporal information. This approach has been used for years for atmospheric parameters by the operational weather forecasting community with great success. Recent developments in forward radiative transfer modeling, physical land surface modeling, and land data assimilation are converging to allow the assembly of an integrated framework for snow/cold lands modeling and radiance assimilation. The objective of the Goddard snow radiance assimilation project is to develop such a framework and explore its capabilities. The key elements of this framework include: a forward radiative transfer model (FRTM) for snow, a snowpack physical model, a land surface water/energy cycle model, and a data assimilation scheme. In fact, multiple models are available for each element enabling optimization to match the needs of a particular study. Together these form a modular and flexible framework for self-consistent, physically-based remote sensing and water/energy cycle studies. In this paper we will describe the elements and the integration plan. All modules will operate within the framework of the Land Information System (LIS), a land surface modeling framework with data assimilation capabilities running on a parallel-node computing cluster. Capabilities for assimilation of snow retrieval products are already under development for LIS. We will describe plans to add radiance-based assimilation capabilities. Plans for validation activities using field measurements will also be discussed.
Framework for assessing key variable dependencies in loose-abrasive grinding and polishing
DOE Office of Scientific and Technical Information (OSTI.GOV)
Taylor, J.S.; Aikens, D.M.; Brown, N.J.
1995-12-01
This memo describes a framework for identifying all key variables that determine the figuring performance of loose-abrasive lapping and polishing machines. This framework is intended as a tool for prioritizing R&D issues, assessing the completeness of process models and experimental data, and for providing a mechanism to identify any assumptions in analytical models or experimental procedures. Future plans for preparing analytical models or performing experiments can refer to this framework in establishing the context of the work.
Model-based reasoning in the physics laboratory: Framework and initial results
NASA Astrophysics Data System (ADS)
Zwickl, Benjamin M.; Hu, Dehui; Finkelstein, Noah; Lewandowski, H. J.
2015-12-01
[This paper is part of the Focused Collection on Upper Division Physics Courses.] We review and extend existing frameworks on modeling to develop a new framework that describes model-based reasoning in introductory and upper-division physics laboratories. Constructing and using models are core scientific practices that have gained significant attention within K-12 and higher education. Although modeling is a broadly applicable process, within physics education, it has been preferentially applied to the iterative development of broadly applicable principles (e.g., Newton's laws of motion in introductory mechanics). A significant feature of the new framework is that measurement tools (in addition to the physical system being studied) are subjected to the process of modeling. Think-aloud interviews were used to refine the framework and demonstrate its utility by documenting examples of model-based reasoning in the laboratory. When applied to the think-aloud interviews, the framework captures and differentiates students' model-based reasoning and helps identify areas of future research. The interviews showed how students productively applied similar facets of modeling to the physical system and measurement tools: construction, prediction, interpretation of data, identification of model limitations, and revision. Finally, we document students' challenges in explicitly articulating assumptions when constructing models of experimental systems and further challenges in model construction due to students' insufficient prior conceptual understanding. A modeling perspective reframes many of the seemingly arbitrary technical details of measurement tools and apparatus as an opportunity for authentic and engaging scientific sense making.
Weldon, Steve M.; Matera, Damian; Lee, ChungWein; Yang, Haichun; Fryer, Ryan M.; Fogo, Agnes B.; Reinhart, Glenn A.
2016-01-01
Renal interstitial fibrosis (IF) is an important pathologic manifestation of disease progression in a variety of chronic kidney diseases (CKD). However, the quantitative and reproducible analysis of IF remains a challenge, especially in experimental animal models of progressive IF. In this study, we compare traditional polarized Sirius Red morphometry (SRM) to novel Second Harmonic Generation (SHG)-based morphometry of unstained tissues for quantitative analysis of IF in the rat 5 day unilateral ureteral obstruction (UUO) model. To validate the specificity of SHG for detecting fibrillar collagen components in IF, co-localization studies for collagens type I, III, and IV were performed using IHC. In addition, we examined the correlation, dynamic range, sensitivity, and ability of polarized SRM and SHG-based morphometry to detect an anti-fibrotic effect of three different treatment regimens. Comparisons were made across three separate studies in which animals were treated with three mechanistically distinct pharmacologic agents: enalapril (ENA, 15, 30, 60 mg/kg), mycophenolate mofetil (MMF, 2, 20 mg/kg) or the connective tissue growth factor (CTGF) neutralizing antibody, EX75606 (1, 3, 10 mg/kg). Our results demonstrate a strong co-localization of the SHG signal with fibrillar collagens I and III but not non-fibrillar collagen IV. Quantitative IF, calculated as percent cortical area of fibrosis, demonstrated similar response profile for both polarized SRM and SHG-based morphometry. The two methodologies exhibited a strong correlation across all three pharmacology studies (r2 = 0.89–0.96). However, compared with polarized SRM, SHG-based morphometry delivered a greater dynamic range and absolute magnitude of reduction of IF after treatment. In summary, we demonstrate that SHG-based morphometry in unstained kidney tissues is comparable to polarized SRM for quantitation of fibrillar collagens, but with an enhanced sensitivity to detect treatment-induced reductions in IF. Thus, performing SHG-based morphometry on unstained kidney tissue is a reliable alternative to traditional polarized SRM for quantitative analysis of IF. PMID:27257917
Generalized Multilevel Structural Equation Modeling
ERIC Educational Resources Information Center
Rabe-Hesketh, Sophia; Skrondal, Anders; Pickles, Andrew
2004-01-01
A unifying framework for generalized multilevel structural equation modeling is introduced. The models in the framework, called generalized linear latent and mixed models (GLLAMM), combine features of generalized linear mixed models (GLMM) and structural equation models (SEM) and consist of a response model and a structural model for the latent…
[Computer aided design and rapid manufacturing of removable partial denture frameworks].
Han, Jing; Lü, Pei-jun; Wang, Yong
2010-08-01
To introduce a method of digital modeling and fabricating removable partial denture (RPD) frameworks using self-developed software for RPD design and rapid manufacturing system. The three-dimensional data of two partially dentate dental casts were obtained using a three-dimensional crossing section scanner. Self-developed software package for RPD design was used to decide the path of insertion and to design different components of RPD frameworks. The components included occlusal rest, clasp, lingual bar, polymeric retention framework and maxillary major connector. The design procedure for the components was as following: first, determine the outline of the component. Second, build the tissue surface of the component using the scanned data within the outline. Third, preset cross section was used to produce the polished surface. Finally, different RPD components were modeled respectively and connected by minor connectors to form an integrated RPD framework. The finished data were imported into a self-developed selective laser melting (SLM) machine and metal frameworks were fabricated directly. RPD frameworks for the two scanned dental casts were modeled with this self-developed program and metal RPD frameworks were successfully fabricated using SLM method. The finished metal frameworks fit well on the plaster models. The self-developed computer aided design and computer aided manufacture (CAD-CAM) system for RPD design and fabrication has completely independent intellectual property rights. It provides a new method of manufacturing metal RPD frameworks.
Calibration and Propagation of Uncertainty for Independence
DOE Office of Scientific and Technical Information (OSTI.GOV)
Holland, Troy Michael; Kress, Joel David; Bhat, Kabekode Ghanasham
This document reports on progress and methods for the calibration and uncertainty quantification of the Independence model developed at UT Austin. The Independence model is an advanced thermodynamic and process model framework for piperazine solutions as a high-performance CO 2 capture solvent. Progress is presented in the framework of the CCSI standard basic data model inference framework. Recent work has largely focused on the thermodynamic submodels of Independence.
An active monitoring method for flood events
NASA Astrophysics Data System (ADS)
Chen, Zeqiang; Chen, Nengcheng; Du, Wenying; Gong, Jianya
2018-07-01
Timely and active detecting and monitoring of a flood event are critical for a quick response, effective decision-making and disaster reduction. To achieve the purpose, this paper proposes an active service framework for flood monitoring based on Sensor Web services and an active model for the concrete implementation of the active service framework. The framework consists of two core components-active warning and active planning. The active warning component is based on a publish-subscribe mechanism implemented by the Sensor Event Service. The active planning component employs the Sensor Planning Service to control the execution of the schemes and models and plans the model input data. The active model, called SMDSA, defines the quantitative calculation method for five elements, scheme, model, data, sensor, and auxiliary information, as well as their associations. Experimental monitoring of the Liangzi Lake flood in the summer of 2010 is conducted to test the proposed framework and model. The results show that 1) the proposed active service framework is efficient for timely and automated flood monitoring. 2) The active model, SMDSA, is a quantitative calculation method used to monitor floods from manual intervention to automatic computation. 3) As much preliminary work as possible should be done to take full advantage of the active service framework and the active model.
Staatz, Christine E; Tett, Susan E
2011-12-01
This review seeks to summarize the available data about Bayesian estimation of area under the plasma concentration-time curve (AUC) and dosage prediction for mycophenolic acid (MPA) and evaluate whether sufficient evidence is available for routine use of Bayesian dosage prediction in clinical practice. A literature search identified 14 studies that assessed the predictive performance of maximum a posteriori Bayesian estimation of MPA AUC and one report that retrospectively evaluated how closely dosage recommendations based on Bayesian forecasting achieved targeted MPA exposure. Studies to date have mostly been undertaken in renal transplant recipients, with limited investigation in patients treated with MPA for autoimmune disease or haematopoietic stem cell transplantation. All of these studies have involved use of the mycophenolate mofetil (MMF) formulation of MPA, rather than the enteric-coated mycophenolate sodium (EC-MPS) formulation. Bias associated with estimation of MPA AUC using Bayesian forecasting was generally less than 10%. However some difficulties with imprecision was evident, with values ranging from 4% to 34% (based on estimation involving two or more concentration measurements). Evaluation of whether MPA dosing decisions based on Bayesian forecasting (by the free website service https://pharmaco.chu-limoges.fr) achieved target drug exposure has only been undertaken once. When MMF dosage recommendations were applied by clinicians, a higher proportion (72-80%) of subsequent estimated MPA AUC values were within the 30-60 mg · h/L target range, compared with when dosage recommendations were not followed (only 39-57% within target range). Such findings provide evidence that Bayesian dosage prediction is clinically useful for achieving target MPA AUC. This study, however, was retrospective and focussed only on adult renal transplant recipients. Furthermore, in this study, Bayesian-generated AUC estimations and dosage predictions were not compared with a later full measured AUC but rather with a further AUC estimate based on a second Bayesian analysis. This study also provided some evidence that a useful monitoring schedule for MPA AUC following adult renal transplant would be every 2 weeks during the first month post-transplant, every 1-3 months between months 1 and 12, and each year thereafter. It will be interesting to see further validations in different patient groups using the free website service. In summary, the predictive performance of Bayesian estimation of MPA, comparing estimated with measured AUC values, has been reported in several studies. However, the next step of predicting dosages based on these Bayesian-estimated AUCs, and prospectively determining how closely these predicted dosages give drug exposure matching targeted AUCs, remains largely unaddressed. Further prospective studies are required, particularly in non-renal transplant patients and with the EC-MPS formulation. Other important questions remain to be answered, such as: do Bayesian forecasting methods devised to date use the best population pharmacokinetic models or most accurate algorithms; are the methods simple to use for routine clinical practice; do the algorithms actually improve dosage estimations beyond empirical recommendations in all groups that receive MPA therapy; and, importantly, do the dosage predictions, when followed, improve patient health outcomes?
Cavuşoğlu, M Cenk; Göktekin, Tolga G; Tendick, Frank
2006-04-01
This paper presents the architectural details of an evolving open source/open architecture software framework for developing organ-level surgical simulations. Our goal is to facilitate shared development of reusable models, to accommodate heterogeneous models of computation, and to provide a framework for interfacing multiple heterogeneous models. The framework provides an application programming interface for interfacing dynamic models defined over spatial domains. It is specifically designed to be independent of the specifics of the modeling methods used, and therefore facilitates seamless integration of heterogeneous models and processes. Furthermore, each model has separate geometries for visualization, simulation, and interfacing, allowing the model developer to choose the most natural geometric representation for each case. Input/output interfaces for visualization and haptics for real-time interactive applications have also been provided.
A Survey of Statistical Models for Reverse Engineering Gene Regulatory Networks
Huang, Yufei; Tienda-Luna, Isabel M.; Wang, Yufeng
2009-01-01
Statistical models for reverse engineering gene regulatory networks are surveyed in this article. To provide readers with a system-level view of the modeling issues in this research, a graphical modeling framework is proposed. This framework serves as the scaffolding on which the review of different models can be systematically assembled. Based on the framework, we review many existing models for many aspects of gene regulation; the pros and cons of each model are discussed. In addition, network inference algorithms are also surveyed under the graphical modeling framework by the categories of point solutions and probabilistic solutions and the connections and differences among the algorithms are provided. This survey has the potential to elucidate the development and future of reverse engineering GRNs and bring statistical signal processing closer to the core of this research. PMID:20046885
Generic framework for mining cellular automata models on protein-folding simulations.
Diaz, N; Tischer, I
2016-05-13
Cellular automata model identification is an important way of building simplified simulation models. In this study, we describe a generic architectural framework to ease the development process of new metaheuristic-based algorithms for cellular automata model identification in protein-folding trajectories. Our framework was developed by a methodology based on design patterns that allow an improved experience for new algorithms development. The usefulness of the proposed framework is demonstrated by the implementation of four algorithms, able to obtain extremely precise cellular automata models of the protein-folding process with a protein contact map representation. Dynamic rules obtained by the proposed approach are discussed, and future use for the new tool is outlined.
First-Order Frameworks for Managing Models in Engineering Optimization
NASA Technical Reports Server (NTRS)
Alexandrov, Natlia M.; Lewis, Robert Michael
2000-01-01
Approximation/model management optimization (AMMO) is a rigorous methodology for attaining solutions of high-fidelity optimization problems with minimal expense in high- fidelity function and derivative evaluation. First-order AMMO frameworks allow for a wide variety of models and underlying optimization algorithms. Recent demonstrations with aerodynamic optimization achieved three-fold savings in terms of high- fidelity function and derivative evaluation in the case of variable-resolution models and five-fold savings in the case of variable-fidelity physics models. The savings are problem dependent but certain trends are beginning to emerge. We give an overview of the first-order frameworks, current computational results, and an idea of the scope of the first-order framework applicability.
GeoFramework: A Modeling Framework for Solid Earth Geophysics
NASA Astrophysics Data System (ADS)
Gurnis, M.; Aivazis, M.; Tromp, J.; Tan, E.; Thoutireddy, P.; Liu, Q.; Choi, E.; Dicaprio, C.; Chen, M.; Simons, M.; Quenette, S.; Appelbe, B.; Aagaard, B.; Williams, C.; Lavier, L.; Moresi, L.; Law, H.
2003-12-01
As data sets in geophysics become larger and of greater relevance to other earth science disciplines, and as earth science becomes more interdisciplinary in general, modeling tools are being driven in new directions. There is now a greater need to link modeling codes to one another, link modeling codes to multiple datasets, and to make modeling software available to non modeling specialists. Coupled with rapid progress in computer hardware (including the computational speed afforded by massively parallel computers), progress in numerical algorithms, and the introduction of software frameworks, these lofty goals of merging software in geophysics are now possible. The GeoFramework project, a collaboration between computer scientists and geoscientists, is a response to these needs and opportunities. GeoFramework is based on and extends Pyre, a Python-based modeling framework, recently developed to link solid (Lagrangian) and fluid (Eulerian) models, as well as mesh generators, visualization packages, and databases, with one another for engineering applications. The utility and generality of Pyre as a general purpose framework in science is now being recognized. Besides its use in engineering and geophysics, it is also being used in particle physics and astronomy. Geology and geophysics impose their own unique requirements on software frameworks which are not generally available in existing frameworks and so there is a need for research in this area. One of the special requirements is the way Lagrangian and Eulerian codes will need to be linked in time and space within a plate tectonics context. GeoFramework has grown beyond its initial goal of linking a limited number of exiting codes together. The following codes are now being reengineered within the context of Pyre: Tecton, 3-D FE Visco-elastic code for lithospheric relaxation; CitComS, a code for spherical mantle convection; SpecFEM3D, a SEM code for global and regional seismic waves; eqsim, a FE code for dynamic earthquake rupture; SNAC, a developing 3-D coded based on the FLAC method for visco-elastoplastic deformation; SNARK, a 3-D FE-PIC method for viscoplastic deformation; and gPLATES an open source paleogeographic/plate tectonics modeling package. We will demonstrate how codes can be linked with themselves, such as a regional and global model of mantle convection and a visco-elastoplastic representation of the crust within viscous mantle flow. Finally, we will describe how http://GeoFramework.org has become a distribution site for a suite of modeling software in geophysics.
Tsoi, B; O'Reilly, D; Jegathisawaran, J; Tarride, J-E; Blackhouse, G; Goeree, R
2015-06-17
In constructing or appraising a health economic model, an early consideration is whether the modelling approach selected is appropriate for the given decision problem. Frameworks and taxonomies that distinguish between modelling approaches can help make this decision more systematic and this study aims to identify and compare the decision frameworks proposed to date on this topic area. A systematic review was conducted to identify frameworks from peer-reviewed and grey literature sources. The following databases were searched: OVID Medline and EMBASE; Wiley's Cochrane Library and Health Economic Evaluation Database; PubMed; and ProQuest. Eight decision frameworks were identified, each focused on a different set of modelling approaches and employing a different collection of selection criterion. The selection criteria can be categorized as either: (i) structural features (i.e. technical elements that are factual in nature) or (ii) practical considerations (i.e. context-dependent attributes). The most commonly mentioned structural features were population resolution (i.e. aggregate vs. individual) and interactivity (i.e. static vs. dynamic). Furthermore, understanding the needs of the end-users and stakeholders was frequently incorporated as a criterion within these frameworks. There is presently no universally-accepted framework for selecting an economic modelling approach. Rather, each highlights different criteria that may be of importance when determining whether a modelling approach is appropriate. Further discussion is thus necessary as the modelling approach selected will impact the validity of the underlying economic model and have downstream implications on its efficiency, transparency and relevance to decision-makers.
Multicriteria framework for selecting a process modelling language
NASA Astrophysics Data System (ADS)
Scanavachi Moreira Campos, Ana Carolina; Teixeira de Almeida, Adiel
2016-01-01
The choice of process modelling language can affect business process management (BPM) since each modelling language shows different features of a given process and may limit the ways in which a process can be described and analysed. However, choosing the appropriate modelling language for process modelling has become a difficult task because of the availability of a large number modelling languages and also due to the lack of guidelines on evaluating, and comparing languages so as to assist in selecting the most appropriate one. This paper proposes a framework for selecting a modelling language in accordance with the purposes of modelling. This framework is based on the semiotic quality framework (SEQUAL) for evaluating process modelling languages and a multicriteria decision aid (MCDA) approach in order to select the most appropriate language for BPM. This study does not attempt to set out new forms of assessment and evaluation criteria, but does attempt to demonstrate how two existing approaches can be combined so as to solve the problem of selection of modelling language. The framework is described in this paper and then demonstrated by means of an example. Finally, the advantages and disadvantages of using SEQUAL and MCDA in an integrated manner are discussed.
State Event Models for the Formal Analysis of Human-Machine Interactions
NASA Technical Reports Server (NTRS)
Combefis, Sebastien; Giannakopoulou, Dimitra; Pecheur, Charles
2014-01-01
The work described in this paper was motivated by our experience with applying a framework for formal analysis of human-machine interactions (HMI) to a realistic model of an autopilot. The framework is built around a formally defined conformance relation called "fullcontrol" between an actual system and the mental model according to which the system is operated. Systems are well-designed if they can be described by relatively simple, full-control, mental models for their human operators. For this reason, our framework supports automated generation of minimal full-control mental models for HMI systems, where both the system and the mental models are described as labelled transition systems (LTS). The autopilot that we analysed has been developed in the NASA Ames HMI prototyping tool ADEPT. In this paper, we describe how we extended the models that our HMI analysis framework handles to allow adequate representation of ADEPT models. We then provide a property-preserving reduction from these extended models to LTSs, to enable application of our LTS-based formal analysis algorithms. Finally, we briefly discuss the analyses we were able to perform on the autopilot model with our extended framework.
Physiome-model-based state-space framework for cardiac deformation recovery.
Wong, Ken C L; Zhang, Heye; Liu, Huafeng; Shi, Pengcheng
2007-11-01
To more reliably recover cardiac information from noise-corrupted, patient-specific measurements, it is essential to employ meaningful constraining models and adopt appropriate optimization criteria to couple the models with the measurements. Although biomechanical models have been extensively used for myocardial motion recovery with encouraging results, the passive nature of such constraints limits their ability to fully count for the deformation caused by active forces of the myocytes. To overcome such limitations, we propose to adopt a cardiac physiome model as the prior constraint for cardiac motion analysis. The cardiac physiome model comprises an electric wave propagation model, an electromechanical coupling model, and a biomechanical model, which are connected through a cardiac system dynamics for a more complete description of the macroscopic cardiac physiology. Embedded within a multiframe state-space framework, the uncertainties of the model and the patient's measurements are systematically dealt with to arrive at optimal cardiac kinematic estimates and possibly beyond. Experiments have been conducted to compare our proposed cardiac-physiome-model-based framework with the solely biomechanical model-based framework. The results show that our proposed framework recovers more accurate cardiac deformation from synthetic data and obtains more sensible estimates from real magnetic resonance image sequences. With the active components introduced by the cardiac physiome model, cardiac deformations recovered from patient's medical images are more physiologically plausible.
Wu, Yiping; Liu, Shu-Guang
2012-01-01
R program language-Soil and Water Assessment Tool-Flexible Modeling Environment (R-SWAT-FME) (Wu and Liu, 2012) is a comprehensive modeling framework that adopts an R package, Flexible Modeling Environment (FME) (Soetaert and Petzoldt, 2010), for the Soil and Water Assessment Tool (SWAT) model (Arnold and others, 1998; Neitsch and others, 2005). This framework provides the functionalities of parameter identifiability, model calibration, and sensitivity and uncertainty analysis with instant visualization. This user's guide shows how to apply this framework for a customized SWAT project.
Modeling asset price processes based on mean-field framework
NASA Astrophysics Data System (ADS)
Ieda, Masashi; Shiino, Masatoshi
2011-12-01
We propose a model of the dynamics of financial assets based on the mean-field framework. This framework allows us to construct a model which includes the interaction among the financial assets reflecting the market structure. Our study is on the cutting edge in the sense of a microscopic approach to modeling the financial market. To demonstrate the effectiveness of our model concretely, we provide a case study, which is the pricing problem of the European call option with short-time memory noise.
Bone metabolism in renal transplant patients treated with cyclosporine or sirolimus.
Campistol, Josep M; Holt, David W; Epstein, Solomon; Gioud-Paquet, Martine; Rutault, Karine; Burke, James T
2005-09-01
Sirolimus is a new immunosuppressive agent used as treatment to prevent acute renal allograft rejection. One of the complications of renal transplantation and subsequent long-term immunosuppression is bone loss associated with osteoporosis and consequent fracture. Two open-label, randomized, phase 2 studies comparing sirolimus versus cyclosporine (CsA) included indices of bone metabolism as secondary end-points. Markers of bone turnover, serum osteocalcin and urinary N-telopeptides, were measured over a 1-year period in 115 patients receiving either CsA or sirolimus as a primary therapy in combination with azathioprine and glucocorticoids (study A) or mycophenolate mofetil (MMF) and glucocorticoids (study B). Urinary excretion of N-telopeptides and the concentrations of serum osteocalcin were consistently higher in the CsA-treated patients and significantly different at week 24 for N-telopeptides and at weeks 12, 24, and 52 for osteocalcin. In conclusion, future trials are warranted to test whether a sirolimus-based regimen conserves bone mineral density compared with a CsA-based regimen.
LANDSAT-D accelerated payload correction subsystem output computer compatible tape format
NASA Technical Reports Server (NTRS)
1982-01-01
The NASA GSFC LANDSAT-D Ground Segment (GS) is developing an Accelerated Payload Correction Subsystem (APCS) to provide Thematic Mapper (TM) image correction data to be used outside the GS. This correction data is computed from a subset of the TM Payload Correction Data (PCD), which is downlinked from the spacecraft in a 32 Kbps data stream, and mirror scan correction data (MSCD), which is extracted from the wideband video data. This correction data is generated in the GS Thematic Mapper Mission Management Facility (MMF-T), and is recorded on a 9-track 1600 bit per inch computer compatible tape (CCT). This CCT is known as a APCS Output CCT (AOT). The AOT follows standardized corrections with respect to data formats, record construction and record identification. Applicable documents are delineated; common conventions which are used in further defining the structure, format and content of the AOT are defined; and the structure and content of the AOT are described.
NASA Astrophysics Data System (ADS)
Park, Jaeheung; Lühr, Hermann; Kervalishvili, Guram; Rauberg, Jan; Michaelis, Ingo; Stolle, Claudia; Kwak, Young-Sil
2015-08-01
Previous studies suggested that electric and/or magnetic field fluctuations observed in the nighttime topside ionosphere at midlatitudes generally originate from quiet time nocturnal medium-scale traveling ionospheric disturbances (MSTIDs). However, decisive evidences for the connection between the two have been missing. In this study we make use of the multispacecraft observations of midlatitude magnetic fluctuations (MMFs) in the nighttime topside ionosphere by the Swarm constellation. The analysis results show that the area hosting MMFs is elongated in the NW-SE (NE-SW) direction in the Northern (Southern) Hemisphere. The elongation direction and the magnetic field polarization support that the area hosting MMFs is nearly field aligned. All these properties of MMFs suggest that they have close relationship with MSTIDs. Expectation values of root-mean-square field-aligned currents associated with MMFs are up to about 4 nA/m2. MMF coherency significantly drops for longitudinal distances of ≥1∘.
NASA Astrophysics Data System (ADS)
Cautun, Marius; van de Weygaert, Rien; Jones, Bernard J. T.; Frenk, Carlos S.; Hellwing, Wojciech A.
2015-01-01
One of the important unknowns of current cosmology concerns the effects of the large scale distribution of matter on the formation and evolution of dark matter haloes and galaxies. One main difficulty in answering this question lies in the absence of a robust and natural way of identifying the large scale environments and their characteristics. This work summarizes the NEXUS+ formalism which extends and improves our multiscale scale-space MMF method. The new algorithm is very successful in tracing the Cosmic Web components, mainly due to its novel filtering of the density in logarithmic space. The method, due to its multiscale and hierarchical character, has the advantage of detecting all the cosmic structures, either prominent or tenuous, without preference for a certain size or shape. The resulting filamentary and wall networks can easily be characterized by their direction, thickness, mass density and density profile. These additional environmental properties allows to us to investigate not only the effect of environment on haloes, but also how it correlates with the environment characteristics.
Measurement of curvature and temperature using multimode interference devices
NASA Astrophysics Data System (ADS)
Guzman-Sepulveda, J. R.; Aguilar-Soto, J. G.; Torres-Cisneros, M.; Ibarra-Manzano, O. G.; May-Arrioja, D. A.
2011-09-01
In this paper we propose the fabrication, implementation, and testing of a novel fiber optic sensor based on Multimode Interference (MMI) effects for independent measurement of curvature and temperature. The development of fiber based MMI devices is relatively new and since they exhibit a band-pass filter response they can be used in different applications. The operating mechanism of our sensor is based on the self-imaging phenomena that occur in multimode fibers (MMF), which is related to the interference of the propagating modes and their accumulated phase. We demonstrate that the peak wavelength shifts with temperature variations as a result of changes in the accumulated phase through thermo-optics effects, while the intensity of the peak wavelength is reduced as the curvature increases since we start to loss higher order modes. In this way both measurements are obtained independently with a single fiber device. Compared to other fiber-optic sensors, our sensor features an extremely simple structure and fabrication process, and hence cost effectiveness.
Saavedra S, Iván; Sasso A, Jaime; Quiñones S, Luis; Saavedra B, Mónica; Gaete G, Leonardo; Boza T, Ignacio; Carvajal H, Cristóbal; Soto L, Jorge
2011-07-01
The bioequivalence of different formulations of a same pharmaceutical product must be tested empirically. To evaluate the relative bioavailability for an oralformulation of mycophenolate mofetil (MMF) (Linfonex™) compared to the reference formulation (Cellcept™) to determine the bioequivalence between both formulations. A randomized, crossover, double-blind trial in 22 healthy male volunteers, who received a single oral dose of 1000 mg of Linfonex and Cellcept with a washout period of 10 days. Plasma levels of the drug were determined by high performance liquid chr ornatography. Plasma concentrations were plotted and maximum concentration, area under the plasma concentration versus time between 0 and 12 hours after administration and área under plasma concentration curve versus time after administration between 0 and infinity, were calculated for both products. The active compound, mycophenolic acid, was similarly absorbed in both formulations. No statistically significant differences were found in calculated pharmacokinetic parameters between both formulations. Linfonex™ 500 mg is bioequivalent to Cellcept™ 500 mg.
A Stochastic Framework for Modeling the Population Dynamics of Convective Clouds
Hagos, Samson; Feng, Zhe; Plant, Robert S.; ...
2018-02-20
A stochastic prognostic framework for modeling the population dynamics of convective clouds and representing them in climate models is proposed. The framework follows the nonequilibrium statistical mechanical approach to constructing a master equation for representing the evolution of the number of convective cells of a specific size and their associated cloud-base mass flux, given a large-scale forcing. In this framework, referred to as STOchastic framework for Modeling Population dynamics of convective clouds (STOMP), the evolution of convective cell size is predicted from three key characteristics of convective cells: (i) the probability of growth, (ii) the probability of decay, and (iii)more » the cloud-base mass flux. STOMP models are constructed and evaluated against CPOL radar observations at Darwin and convection permitting model (CPM) simulations. Multiple models are constructed under various assumptions regarding these three key parameters and the realisms of these models are evaluated. It is shown that in a model where convective plumes prefer to aggregate spatially and the cloud-base mass flux is a nonlinear function of convective cell area, the mass flux manifests a recharge-discharge behavior under steady forcing. Such a model also produces observed behavior of convective cell populations and CPM simulated cloud-base mass flux variability under diurnally varying forcing. Finally, in addition to its use in developing understanding of convection processes and the controls on convective cell size distributions, this modeling framework is also designed to serve as a nonequilibrium closure formulations for spectral mass flux parameterizations.« less
A Stochastic Framework for Modeling the Population Dynamics of Convective Clouds
NASA Astrophysics Data System (ADS)
Hagos, Samson; Feng, Zhe; Plant, Robert S.; Houze, Robert A.; Xiao, Heng
2018-02-01
A stochastic prognostic framework for modeling the population dynamics of convective clouds and representing them in climate models is proposed. The framework follows the nonequilibrium statistical mechanical approach to constructing a master equation for representing the evolution of the number of convective cells of a specific size and their associated cloud-base mass flux, given a large-scale forcing. In this framework, referred to as STOchastic framework for Modeling Population dynamics of convective clouds (STOMP), the evolution of convective cell size is predicted from three key characteristics of convective cells: (i) the probability of growth, (ii) the probability of decay, and (iii) the cloud-base mass flux. STOMP models are constructed and evaluated against CPOL radar observations at Darwin and convection permitting model (CPM) simulations. Multiple models are constructed under various assumptions regarding these three key parameters and the realisms of these models are evaluated. It is shown that in a model where convective plumes prefer to aggregate spatially and the cloud-base mass flux is a nonlinear function of convective cell area, the mass flux manifests a recharge-discharge behavior under steady forcing. Such a model also produces observed behavior of convective cell populations and CPM simulated cloud-base mass flux variability under diurnally varying forcing. In addition to its use in developing understanding of convection processes and the controls on convective cell size distributions, this modeling framework is also designed to serve as a nonequilibrium closure formulations for spectral mass flux parameterizations.
A Stochastic Framework for Modeling the Population Dynamics of Convective Clouds
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hagos, Samson; Feng, Zhe; Plant, Robert S.
A stochastic prognostic framework for modeling the population dynamics of convective clouds and representing them in climate models is proposed. The framework follows the nonequilibrium statistical mechanical approach to constructing a master equation for representing the evolution of the number of convective cells of a specific size and their associated cloud-base mass flux, given a large-scale forcing. In this framework, referred to as STOchastic framework for Modeling Population dynamics of convective clouds (STOMP), the evolution of convective cell size is predicted from three key characteristics of convective cells: (i) the probability of growth, (ii) the probability of decay, and (iii)more » the cloud-base mass flux. STOMP models are constructed and evaluated against CPOL radar observations at Darwin and convection permitting model (CPM) simulations. Multiple models are constructed under various assumptions regarding these three key parameters and the realisms of these models are evaluated. It is shown that in a model where convective plumes prefer to aggregate spatially and the cloud-base mass flux is a nonlinear function of convective cell area, the mass flux manifests a recharge-discharge behavior under steady forcing. Such a model also produces observed behavior of convective cell populations and CPM simulated cloud-base mass flux variability under diurnally varying forcing. Finally, in addition to its use in developing understanding of convection processes and the controls on convective cell size distributions, this modeling framework is also designed to serve as a nonequilibrium closure formulations for spectral mass flux parameterizations.« less
A Smart Modeling Framework for Integrating BMI-enabled Models as Web Services
NASA Astrophysics Data System (ADS)
Jiang, P.; Elag, M.; Kumar, P.; Peckham, S. D.; Liu, R.; Marini, L.; Hsu, L.
2015-12-01
Serviced-oriented computing provides an opportunity to couple web service models using semantic web technology. Through this approach, models that are exposed as web services can be conserved in their own local environment, thus making it easy for modelers to maintain and update the models. In integrated modeling, the serviced-oriented loose-coupling approach requires (1) a set of models as web services, (2) the model metadata describing the external features of a model (e.g., variable name, unit, computational grid, etc.) and (3) a model integration framework. We present the architecture of coupling web service models that are self-describing by utilizing a smart modeling framework. We expose models that are encapsulated with CSDMS (Community Surface Dynamics Modeling System) Basic Model Interfaces (BMI) as web services. The BMI-enabled models are self-describing by uncovering models' metadata through BMI functions. After a BMI-enabled model is serviced, a client can initialize, execute and retrieve the meta-information of the model by calling its BMI functions over the web. Furthermore, a revised version of EMELI (Peckham, 2015), an Experimental Modeling Environment for Linking and Interoperability, is chosen as the framework for coupling BMI-enabled web service models. EMELI allows users to combine a set of component models into a complex model by standardizing model interface using BMI as well as providing a set of utilities smoothing the integration process (e.g., temporal interpolation). We modify the original EMELI so that the revised modeling framework is able to initialize, execute and find the dependencies of the BMI-enabled web service models. By using the revised EMELI, an example will be presented on integrating a set of topoflow model components that are BMI-enabled and exposed as web services. Reference: Peckham, S.D. (2014) EMELI 1.0: An experimental smart modeling framework for automatic coupling of self-describing models, Proceedings of HIC 2014, 11th International Conf. on Hydroinformatics, New York, NY.
USDA-ARS?s Scientific Manuscript database
The environmental modeling community has historically been concerned with the proliferation of models and the effort associated with collective model development tasks (e.g., code generation, data provisioning and transformation, etc.). Environmental modeling frameworks (EMFs) have been developed to...
A framework for modeling uncertainty in regional climate change
In this study, we present a new modeling framework and a large ensemble of climate projections to investigate the uncertainty in regional climate change over the United States associated with four dimensions of uncertainty. The sources of uncertainty considered in this framework ...
A Framework for Dimensionality Assessment for Multidimensional Item Response Models
ERIC Educational Resources Information Center
Svetina, Dubravka; Levy, Roy
2014-01-01
A framework is introduced for considering dimensionality assessment procedures for multidimensional item response models. The framework characterizes procedures in terms of their confirmatory or exploratory approach, parametric or nonparametric assumptions, and applicability to dichotomous, polytomous, and missing data. Popular and emerging…
Stress distribution in Co-Cr implant frameworks after laser or TIG welding.
de Castro, Gabriela Cassaro; de Araújo, Cleudmar Amaral; Mesquita, Marcelo Ferraz; Consani, Rafael Leonardo Xediek; Nóbilo, Mauro Antônio de Arruda
2013-01-01
Lack of passivity has been associated with biomechanical problems in implant-supported prosthesis. The aim of this study was to evaluate the passivity of three techniques to fabricate an implant framework from a Co-Cr alloy by photoelasticity. The model was obtained from a steel die simulating an edentulous mandible with 4 external hexagon analog implants with a standard platform. On this model, five frameworks were fabricated for each group: a monoblock framework (control), laser and TIG welding frameworks. The photoelastic model was made from a flexible epoxy resin. On the photoelastic analysis, the frameworks were bolted onto the model for the verification of maximum shear stress at 34 selected points around the implants and 5 points in the middle of the model. The stresses were compared all over the photoelastic model, between the right, left, and center regions and between the cervical and apical regions. The values were subjected to two-way ANOVA, and Tukey's test (α=0.05). There was no significant difference among the groups and studied areas (p>0.05). It was concluded that the stresses generated around the implants were similar for all techniques.
Model-theoretic framework for sensor data fusion
NASA Astrophysics Data System (ADS)
Zavoleas, Kyriakos P.; Kokar, Mieczyslaw M.
1993-09-01
The main goal of our research in sensory data fusion (SDF) is the development of a systematic approach (a methodology) to designing systems for interpreting sensory information and for reasoning about the situation based upon this information and upon available data bases and knowledge bases. To achieve such a goal, two kinds of subgoals have been set: (1) develop a theoretical framework in which rational design/implementation decisions can be made, and (2) design a prototype SDF system along the lines of the framework. Our initial design of the framework has been described in our previous papers. In this paper we concentrate on the model-theoretic aspects of this framework. We postulate that data are embedded in data models, and information processing mechanisms are embedded in model operators. The paper is devoted to analyzing the classes of model operators and their significance in SDF. We investigate transformation abstraction and fusion operators. A prototype SDF system, fusing data from range and intensity sensors, is presented, exemplifying the structures introduced. Our framework is justified by the fact that it provides modularity, traceability of information flow, and a basis for a specification language for SDF.
Clinical time series prediction: Toward a hierarchical dynamical system framework.
Liu, Zitao; Hauskrecht, Milos
2015-09-01
Developing machine learning and data mining algorithms for building temporal models of clinical time series is important for understanding of the patient condition, the dynamics of a disease, effect of various patient management interventions and clinical decision making. In this work, we propose and develop a novel hierarchical framework for modeling clinical time series data of varied length and with irregularly sampled observations. Our hierarchical dynamical system framework for modeling clinical time series combines advantages of the two temporal modeling approaches: the linear dynamical system and the Gaussian process. We model the irregularly sampled clinical time series by using multiple Gaussian process sequences in the lower level of our hierarchical framework and capture the transitions between Gaussian processes by utilizing the linear dynamical system. The experiments are conducted on the complete blood count (CBC) panel data of 1000 post-surgical cardiac patients during their hospitalization. Our framework is evaluated and compared to multiple baseline approaches in terms of the mean absolute prediction error and the absolute percentage error. We tested our framework by first learning the time series model from data for the patients in the training set, and then using it to predict future time series values for the patients in the test set. We show that our model outperforms multiple existing models in terms of its predictive accuracy. Our method achieved a 3.13% average prediction accuracy improvement on ten CBC lab time series when it was compared against the best performing baseline. A 5.25% average accuracy improvement was observed when only short-term predictions were considered. A new hierarchical dynamical system framework that lets us model irregularly sampled time series data is a promising new direction for modeling clinical time series and for improving their predictive performance. Copyright © 2014 Elsevier B.V. All rights reserved.
ERIC Educational Resources Information Center
King, Gillian; Currie, Melissa; Smith, Linda; Servais, Michelle; McDougall, Janette
2008-01-01
A framework of operating models for interdisciplinary research programs in clinical service organizations is presented, consisting of a "clinician-researcher" skill development model, a program evaluation model, a researcher-led knowledge generation model, and a knowledge conduit model. Together, these models comprise a tailored, collaborative…
A general modeling framework for describing spatially structured population dynamics
Sample, Christine; Fryxell, John; Bieri, Joanna; Federico, Paula; Earl, Julia; Wiederholt, Ruscena; Mattsson, Brady; Flockhart, Tyler; Nicol, Sam; Diffendorfer, James E.; Thogmartin, Wayne E.; Erickson, Richard A.; Norris, D. Ryan
2017-01-01
Variation in movement across time and space fundamentally shapes the abundance and distribution of populations. Although a variety of approaches model structured population dynamics, they are limited to specific types of spatially structured populations and lack a unifying framework. Here, we propose a unified network-based framework sufficiently novel in its flexibility to capture a wide variety of spatiotemporal processes including metapopulations and a range of migratory patterns. It can accommodate different kinds of age structures, forms of population growth, dispersal, nomadism and migration, and alternative life-history strategies. Our objective was to link three general elements common to all spatially structured populations (space, time and movement) under a single mathematical framework. To do this, we adopt a network modeling approach. The spatial structure of a population is represented by a weighted and directed network. Each node and each edge has a set of attributes which vary through time. The dynamics of our network-based population is modeled with discrete time steps. Using both theoretical and real-world examples, we show how common elements recur across species with disparate movement strategies and how they can be combined under a unified mathematical framework. We illustrate how metapopulations, various migratory patterns, and nomadism can be represented with this modeling approach. We also apply our network-based framework to four organisms spanning a wide range of life histories, movement patterns, and carrying capacities. General computer code to implement our framework is provided, which can be applied to almost any spatially structured population. This framework contributes to our theoretical understanding of population dynamics and has practical management applications, including understanding the impact of perturbations on population size, distribution, and movement patterns. By working within a common framework, there is less chance that comparative analyses are colored by model details rather than general principles
Entity-Centric Abstraction and Modeling Framework for Transportation Architectures
NASA Technical Reports Server (NTRS)
Lewe, Jung-Ho; DeLaurentis, Daniel A.; Mavris, Dimitri N.; Schrage, Daniel P.
2007-01-01
A comprehensive framework for representing transpportation architectures is presented. After discussing a series of preceding perspectives and formulations, the intellectual underpinning of the novel framework using an entity-centric abstraction of transportation is described. The entities include endogenous and exogenous factors and functional expressions are offered that relate these and their evolution. The end result is a Transportation Architecture Field which permits analysis of future concepts under the holistic perspective. A simulation model which stems from the framework is presented and exercised producing results which quantify improvements in air transportation due to advanced aircraft technologies. Finally, a modeling hypothesis and its accompanying criteria are proposed to test further use of the framework for evaluating new transportation solutions.
Clinical Knowledge Governance Framework for Nationwide Data Infrastructure Projects.
Wulff, Antje; Haarbrandt, Birger; Marschollek, Michael
2018-01-01
The availability of semantically-enriched and interoperable clinical information models is crucial for reusing once collected data across institutions like aspired in the German HiGHmed project. Funded by the Federal Ministry of Education and Research, this nationwide data infrastructure project adopts the openEHR approach for semantic modelling. Here, strong governance is required to define high-quality and reusable models. Design of a clinical knowledge governance framework for openEHR modelling in cross-institutional settings like HiGHmed. Analysis of successful practices from international projects, published ideas on archetype governance and own modelling experiences as well as modelling of BPMN processes. We designed a framework by presenting archetype variations, roles and responsibilities, IT support and modelling workflows. Our framework has great potential to make the openEHR modelling efforts manageable. Because practical experiences are rare, prospectively our work will be predestinated to evaluate the benefits of such structured governance approaches.
A new fit-for-purpose model testing framework: Decision Crash Tests
NASA Astrophysics Data System (ADS)
Tolson, Bryan; Craig, James
2016-04-01
Decision-makers in water resources are often burdened with selecting appropriate multi-million dollar strategies to mitigate the impacts of climate or land use change. Unfortunately, the suitability of existing hydrologic simulation models to accurately inform decision-making is in doubt because the testing procedures used to evaluate model utility (i.e., model validation) are insufficient. For example, many authors have identified that a good standard framework for model testing called the Klemes Crash Tests (KCTs), which are the classic model validation procedures from Klemeš (1986) that Andréassian et al. (2009) rename as KCTs, have yet to become common practice in hydrology. Furthermore, Andréassian et al. (2009) claim that the progression of hydrological science requires widespread use of KCT and the development of new crash tests. Existing simulation (not forecasting) model testing procedures such as KCTs look backwards (checking for consistency between simulations and past observations) rather than forwards (explicitly assessing if the model is likely to support future decisions). We propose a fundamentally different, forward-looking, decision-oriented hydrologic model testing framework based upon the concept of fit-for-purpose model testing that we call Decision Crash Tests or DCTs. Key DCT elements are i) the model purpose (i.e., decision the model is meant to support) must be identified so that model outputs can be mapped to management decisions ii) the framework evaluates not just the selected hydrologic model but the entire suite of model-building decisions associated with model discretization, calibration etc. The framework is constructed to directly and quantitatively evaluate model suitability. The DCT framework is applied to a model building case study on the Grand River in Ontario, Canada. A hypothetical binary decision scenario is analysed (upgrade or not upgrade the existing flood control structure) under two different sets of model building decisions. In one case, we show the set of model building decisions has a low probability to correctly support the upgrade decision. In the other case, we show evidence suggesting another set of model building decisions has a high probability to correctly support the decision. The proposed DCT framework focuses on what model users typically care about: the management decision in question. The DCT framework will often be very strict and will produce easy to interpret results enabling clear unsuitability determinations. In the past, hydrologic modelling progress has necessarily meant new models and model building methods. Continued progress in hydrologic modelling requires finding clear evidence to motivate researchers to disregard unproductive models and methods and the DCT framework is built to produce this kind of evidence. References: Andréassian, V., C. Perrin, L. Berthet, N. Le Moine, J. Lerat, C. Loumagne, L. Oudin, T. Mathevet, M.-H. Ramos, and A. Valéry (2009), Crash tests for a standardized evaluation of hydrological models. Hydrology and Earth System Sciences, 13, 1757-1764. Klemeš, V. (1986), Operational testing of hydrological simulation models. Hydrological Sciences Journal, 31 (1), 13-24.
Design of a Model Execution Framework: Repetitive Object-Oriented Simulation Environment (ROSE)
NASA Technical Reports Server (NTRS)
Gray, Justin S.; Briggs, Jeffery L.
2008-01-01
The ROSE framework was designed to facilitate complex system analyses. It completely divorces the model execution process from the model itself. By doing so ROSE frees the modeler to develop a library of standard modeling processes such as Design of Experiments, optimizers, parameter studies, and sensitivity studies which can then be applied to any of their available models. The ROSE framework accomplishes this by means of a well defined API and object structure. Both the API and object structure are presented here with enough detail to implement ROSE in any object-oriented language or modeling tool.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lim, Hojun; Abdeljawad, Fadi; Owen, Steven J.
Here, the mechanical properties of materials systems are highly influenced by various features at the microstructural level. The ability to capture these heterogeneities and incorporate them into continuum-scale frameworks of the deformation behavior is considered a key step in the development of complex non-local models of failure. In this study, we present a modeling framework that incorporates physically-based realizations of polycrystalline aggregates from a phase field (PF) model into a crystal plasticity finite element (CP-FE) framework. Simulated annealing via the PF model yields ensembles of materials microstructures with various grain sizes and shapes. With the aid of a novel FEmore » meshing technique, FE discretizations of these microstructures are generated, where several key features, such as conformity to interfaces, and triple junction angles, are preserved. The discretizations are then used in the CP-FE framework to simulate the mechanical response of polycrystalline α-iron. It is shown that the conformal discretization across interfaces reduces artificial stress localization commonly observed in non-conformal FE discretizations. The work presented herein is a first step towards incorporating physically-based microstructures in lieu of the overly simplified representations that are commonly used. In broader terms, the proposed framework provides future avenues to explore bridging models of materials processes, e.g. additive manufacturing and microstructure evolution of multi-phase multi-component systems, into continuum-scale frameworks of the mechanical properties.« less
Lim, Hojun; Abdeljawad, Fadi; Owen, Steven J.; ...
2016-04-25
Here, the mechanical properties of materials systems are highly influenced by various features at the microstructural level. The ability to capture these heterogeneities and incorporate them into continuum-scale frameworks of the deformation behavior is considered a key step in the development of complex non-local models of failure. In this study, we present a modeling framework that incorporates physically-based realizations of polycrystalline aggregates from a phase field (PF) model into a crystal plasticity finite element (CP-FE) framework. Simulated annealing via the PF model yields ensembles of materials microstructures with various grain sizes and shapes. With the aid of a novel FEmore » meshing technique, FE discretizations of these microstructures are generated, where several key features, such as conformity to interfaces, and triple junction angles, are preserved. The discretizations are then used in the CP-FE framework to simulate the mechanical response of polycrystalline α-iron. It is shown that the conformal discretization across interfaces reduces artificial stress localization commonly observed in non-conformal FE discretizations. The work presented herein is a first step towards incorporating physically-based microstructures in lieu of the overly simplified representations that are commonly used. In broader terms, the proposed framework provides future avenues to explore bridging models of materials processes, e.g. additive manufacturing and microstructure evolution of multi-phase multi-component systems, into continuum-scale frameworks of the mechanical properties.« less
Enhancing a socio-hydrological modelling framework through field observations: a case study in India
NASA Astrophysics Data System (ADS)
den Besten, Nadja; Pande, Saket; Savenije, Huub H. G.
2016-04-01
Recently a smallholder socio-hydrological modelling framework was proposed and deployed to understand the underlying dynamics of Agrarian Crisis in Maharashtra state of India. It was found that cotton and sugarcane smallholders whom lack irrigation and storage techniques are most susceptible to distress. This study further expands the application of the modelling framework to other crops that are abundant in the state of Maharashtra, such as Paddy, Jowar and Soyabean to assess whether the conclusions on the possible causes behind smallholder distress still hold. Further, a fieldwork will be undertaken in March 2016 in the district of Pune. During the fieldwork 50 smallholders will be interviewed in which socio-hydrological assumptions on hydrology and capital equations and corresponding closure relationships, incorporated the current model, will be put to test. Besides the assumptions, the questionnaires will be used to better understand the hydrological reality of the farm holders, in terms of water usage and storage capacity. In combination with historical records on the smallholders' socio-economic data acquired over the last thirty years available through several NGOs in the region, socio-hydrological realism of the modelling framework will be enhanced. The preliminary outcomes of a desktop study show the possibilities of a water-centric modelling framework in understanding the constraints on smallholder farming. The results and methods described can be a first step guiding following research on the modelling framework: a start in testing the framework in multiple rural locations around the globe.
Models and Frameworks: A Synergistic Association for Developing Component-Based Applications
Sánchez-Ledesma, Francisco; Sánchez, Pedro; Pastor, Juan A.; Álvarez, Bárbara
2014-01-01
The use of frameworks and components has been shown to be effective in improving software productivity and quality. However, the results in terms of reuse and standardization show a dearth of portability either of designs or of component-based implementations. This paper, which is based on the model driven software development paradigm, presents an approach that separates the description of component-based applications from their possible implementations for different platforms. This separation is supported by automatic integration of the code obtained from the input models into frameworks implemented using object-oriented technology. Thus, the approach combines the benefits of modeling applications from a higher level of abstraction than objects, with the higher levels of code reuse provided by frameworks. In order to illustrate the benefits of the proposed approach, two representative case studies that use both an existing framework and an ad hoc framework, are described. Finally, our approach is compared with other alternatives in terms of the cost of software development. PMID:25147858
A Theoretically Consistent Framework for Modelling Lagrangian Particle Deposition in Plant Canopies
NASA Astrophysics Data System (ADS)
Bailey, Brian N.; Stoll, Rob; Pardyjak, Eric R.
2018-06-01
We present a theoretically consistent framework for modelling Lagrangian particle deposition in plant canopies. The primary focus is on describing the probability of particles encountering canopy elements (i.e., potential deposition), and provides a consistent means for including the effects of imperfect deposition through any appropriate sub-model for deposition efficiency. Some aspects of the framework draw upon an analogy to radiation propagation through a turbid medium with which to develop model theory. The present method is compared against one of the most commonly used heuristic Lagrangian frameworks, namely that originally developed by Legg and Powell (Agricultural Meteorology, 1979, Vol. 20, 47-67), which is shown to be theoretically inconsistent. A recommendation is made to discontinue the use of this heuristic approach in favour of the theoretically consistent framework developed herein, which is no more difficult to apply under equivalent assumptions. The proposed framework has the additional advantage that it can be applied to arbitrary canopy geometries given readily measurable parameters describing vegetation structure.
Models and frameworks: a synergistic association for developing component-based applications.
Alonso, Diego; Sánchez-Ledesma, Francisco; Sánchez, Pedro; Pastor, Juan A; Álvarez, Bárbara
2014-01-01
The use of frameworks and components has been shown to be effective in improving software productivity and quality. However, the results in terms of reuse and standardization show a dearth of portability either of designs or of component-based implementations. This paper, which is based on the model driven software development paradigm, presents an approach that separates the description of component-based applications from their possible implementations for different platforms. This separation is supported by automatic integration of the code obtained from the input models into frameworks implemented using object-oriented technology. Thus, the approach combines the benefits of modeling applications from a higher level of abstraction than objects, with the higher levels of code reuse provided by frameworks. In order to illustrate the benefits of the proposed approach, two representative case studies that use both an existing framework and an ad hoc framework, are described. Finally, our approach is compared with other alternatives in terms of the cost of software development.
A smoothed particle hydrodynamics framework for modelling multiphase interactions at meso-scale
NASA Astrophysics Data System (ADS)
Li, Ling; Shen, Luming; Nguyen, Giang D.; El-Zein, Abbas; Maggi, Federico
2018-01-01
A smoothed particle hydrodynamics (SPH) framework is developed for modelling multiphase interactions at meso-scale, including the liquid-solid interaction induced deformation of the solid phase. With an inter-particle force formulation that mimics the inter-atomic force in molecular dynamics, the proposed framework includes the long-range attractions between particles, and more importantly, the short-range repulsive forces to avoid particle clustering and instability problems. Three-dimensional numerical studies have been conducted to demonstrate the capabilities of the proposed framework to quantitatively replicate the surface tension of water, to model the interactions between immiscible liquids and solid, and more importantly, to simultaneously model the deformation of solid and liquid induced by the multiphase interaction. By varying inter-particle potential magnitude, the proposed SPH framework has successfully simulated various wetting properties ranging from hydrophobic to hydrophilic surfaces. The simulation results demonstrate the potential of the proposed framework to genuinely study complex multiphase interactions in wet granular media.
Sequentially Executed Model Evaluation Framework
DOE Office of Scientific and Technical Information (OSTI.GOV)
2015-10-20
Provides a message passing framework between generic input, model and output drivers, and specifies an API for developing such drivers. Also provides batch and real-time controllers which step the model and I/O through the time domain (or other discrete domain), and sample I/O drivers. This is a library framework, and does not, itself, solve any problems or execute any modeling. The SeMe framework aids in development of models which operate on sequential information, such as time-series, where evaluation is based on prior results combined with new data for this iteration. Has applications in quality monitoring, and was developed as partmore » of the CANARY-EDS software, where real-time water quality data is being analyzed for anomalies.« less
Akita, Yasuyuki; Baldasano, Jose M; Beelen, Rob; Cirach, Marta; de Hoogh, Kees; Hoek, Gerard; Nieuwenhuijsen, Mark; Serre, Marc L; de Nazelle, Audrey
2014-04-15
In recognition that intraurban exposure gradients may be as large as between-city variations, recent air pollution epidemiologic studies have become increasingly interested in capturing within-city exposure gradients. In addition, because of the rapidly accumulating health data, recent studies also need to handle large study populations distributed over large geographic domains. Even though several modeling approaches have been introduced, a consistent modeling framework capturing within-city exposure variability and applicable to large geographic domains is still missing. To address these needs, we proposed a modeling framework based on the Bayesian Maximum Entropy method that integrates monitoring data and outputs from existing air quality models based on Land Use Regression (LUR) and Chemical Transport Models (CTM). The framework was applied to estimate the yearly average NO2 concentrations over the region of Catalunya in Spain. By jointly accounting for the global scale variability in the concentration from the output of CTM and the intraurban scale variability through LUR model output, the proposed framework outperformed more conventional approaches.
An ontology for component-based models of water resource systems
NASA Astrophysics Data System (ADS)
Elag, Mostafa; Goodall, Jonathan L.
2013-08-01
Component-based modeling is an approach for simulating water resource systems where a model is composed of a set of components, each with a defined modeling objective, interlinked through data exchanges. Component-based modeling frameworks are used within the hydrologic, atmospheric, and earth surface dynamics modeling communities. While these efforts have been advancing, it has become clear that the water resources modeling community in particular, and arguably the larger earth science modeling community as well, faces a challenge of fully and precisely defining the metadata for model components. The lack of a unified framework for model component metadata limits interoperability between modeling communities and the reuse of models across modeling frameworks due to ambiguity about the model and its capabilities. To address this need, we propose an ontology for water resources model components that describes core concepts and relationships using the Web Ontology Language (OWL). The ontology that we present, which is termed the Water Resources Component (WRC) ontology, is meant to serve as a starting point that can be refined over time through engagement by the larger community until a robust knowledge framework for water resource model components is achieved. This paper presents the methodology used to arrive at the WRC ontology, the WRC ontology itself, and examples of how the ontology can aid in component-based water resources modeling by (i) assisting in identifying relevant models, (ii) encouraging proper model coupling, and (iii) facilitating interoperability across earth science modeling frameworks.
lazar: a modular predictive toxicology framework
Maunz, Andreas; Gütlein, Martin; Rautenberg, Micha; Vorgrimmler, David; Gebele, Denis; Helma, Christoph
2013-01-01
lazar (lazy structure–activity relationships) is a modular framework for predictive toxicology. Similar to the read across procedure in toxicological risk assessment, lazar creates local QSAR (quantitative structure–activity relationship) models for each compound to be predicted. Model developers can choose between a large variety of algorithms for descriptor calculation and selection, chemical similarity indices, and model building. This paper presents a high level description of the lazar framework and discusses the performance of example classification and regression models. PMID:23761761
Control of Distributed Parameter Systems
1990-08-01
vari- ant of the general Lotka - Volterra model for interspecific competition. The variant described the emergence of one subpopulation from another as a...distribut ion unlimited. I&. ARSTRACT (MAUMUnw2O1 A unified arioroximation framework for Parameter estimation In general linear POE models has been completed...unified approximation framework for parameter estimation in general linear PDE models. This framework has provided the theoretical basis for a number of
Multi-Fidelity Framework for Modeling Combustion Instability
2016-07-27
generated from the reduced-domain dataset. Evaluations of the framework are performed based on simplified test problems for a model rocket combustor showing...generated from the reduced-domain dataset. Evaluations of the framework are performed based on simplified test problems for a model rocket combustor...of Aeronautics and Astronautics and Associate Fellow AIAA. ‡ Professor Emeritus. § Senior Scientist, Rocket Propulsion Division and Senior Member
Model Based Analysis and Test Generation for Flight Software
NASA Technical Reports Server (NTRS)
Pasareanu, Corina S.; Schumann, Johann M.; Mehlitz, Peter C.; Lowry, Mike R.; Karsai, Gabor; Nine, Harmon; Neema, Sandeep
2009-01-01
We describe a framework for model-based analysis and test case generation in the context of a heterogeneous model-based development paradigm that uses and combines Math- Works and UML 2.0 models and the associated code generation tools. This paradigm poses novel challenges to analysis and test case generation that, to the best of our knowledge, have not been addressed before. The framework is based on a common intermediate representation for different modeling formalisms and leverages and extends model checking and symbolic execution tools for model analysis and test case generation, respectively. We discuss the application of our framework to software models for a NASA flight mission.
A Framework for Cloudy Model Optimization and Database Storage
NASA Astrophysics Data System (ADS)
Calvén, Emilia; Helton, Andrew; Sankrit, Ravi
2018-01-01
We present a framework for producing Cloudy photoionization models of the nebular emission from novae ejecta and storing a subset of the results in SQL database format for later usage. The database can be searched for models best fitting observed spectral line ratios. Additionally, the framework includes an optimization feature that can be used in tandem with the database to search for and improve on models by creating new Cloudy models while, varying the parameters. The database search and optimization can be used to explore the structures of nebulae by deriving their properties from the best-fit models. The goal is to provide the community with a large database of Cloudy photoionization models, generated from parameters reflecting conditions within novae ejecta, that can be easily fitted to observed spectral lines; either by directly accessing the database using the framework code or by usage of a website specifically made for this purpose.
NASA Astrophysics Data System (ADS)
Ozel, Oguz; Guralp, Cansun; Tunc, Suleyman; Yalcinkaya, Esref
2016-04-01
The main objective of this study is to install a multi-parameter borehole system and surface array as close to the main Marmara Fault (MMF) in the western Marmara Sea as possible, and measure continuously the evolution of the state of the fault zone surrounding the MMF and to detect any anomaly or change, which may occur before earthquakes by making use of the data from the arrays already running in the eastern part of the Marmara Sea. The multi-parameter borehole system is composed of very wide dynamic range and stable borehole (VBB) broad band seismic sensor, and incorporate strain meter, tilt meter, and temperature and local hydrostatic pressure measuring devices. The borehole seismic station uses the latest update technologies and design ideas to record "Earth tides" signals to the smallest magnitude -3 events. Additionally, a surface microearthquake observation array, consisting of 8-10 seismometers around the borehole is established to obtain continuous high resolution locations of micro-seismicity and to better understand the existing seismically active structures and their roles in local tectonic settings.Bringing face to face the seismograms of microearthquakes recorded by borehole and surface instruments portrays quite different contents. The shorter recording duration and nearly flat frequency spectrum up to the Nyquist frequencies of borehole records are faced with longer recording duration and rapid decay of spectral amplitudes at higher frequencies of a surface seismogram. The main causative of the observed differences are near surface geology effects that mask most of the source related information the seismograms include, and that give rise to scattering, generating longer duration seismograms. In view of these circumstances, studies on microearthquakes employing surface seismograms may bring on misleading results. Particularly, the works on earthquake physics and nucleation process of earthquakes requires elaborate analysis of tiny events. It is obvious from the studies on the nucleation process of the 1999 earthquake that tens of minutes before the major rupture initiate noteworthy microearthquake activity happened. The starting point of the 1999 rupture was a site of swarm activity noticed a few decades prior the main shock. Nowadays, analogous case is probable in western Marmara Sea region, prone to a major event in near future where the seismic activity is prevailing along the impending rupture zone. Deploying a borehole system eastern end of the Ganos fault zone may yield invaluable data to closely inspect and monitor the last stages of the preparation stage of major rupture.
[Meningoencephalitis caused by West Nile virus in a renal transplant recipient].
Ertilav, Muhittin; Ozkul, Aykut; Zeytinoğlu, Ayşın; Sen, Sait; Sipahi, Savaş; Töz, Hüseyin; Kitiş, Omer; Eraslan, Cenk
2014-10-01
West Nile virus (WNV) infection which is asymptomatic or mild in normal population, it may cause serious clinical conditions leading to death in eldery and immunosupressed patients. The virus is mainly transmitted by mosquito bites, however transfusion, transplantation, transplasental and nosocomial ways have also been reported to be responsible for viral transmission. It is known that WNV may cause life-threatining conditions such as central nervous system (CNS) infections especially in bone marrow and solid organ transplant recipients. In this report, the first case of WNV encephalitis in an immunosuppressed patient with renal transplant in Turkey was presented. A 25-year-old male patient admitted to our hospital with the complaints of generalized myalgia, nausea and vomiting, after the 24. day of renal transplantation from a live donor. Since he developed diffuse tonic clonic seizures during his follow up, he was diagnosed as meningoencephalitis with the results of cranial magnetic resonance imaging (MR) and cerebrospinal fluid (CSF) biochemistry. Bacterial and fungal cultures of blood and CSF yielded negative results. CMV antigenemia test and CMV IgM in blood, and nucleic acid tests for CMV, EBV, HSV-1/2, VZV, HHV-6, enterovirus and parvovirus in CSF were also negative. However, WNV RNA was detected in CSF by an in-house reverse transcriptase (RT) nested PCR method. The sequence analysis (GenBank BLAST) of the virus showed that it had 99% similarity with Lineage-1 WNV strains. To define the transmission way of the virus to the recipient, WNV-RNA was searched in the renal biopsy sample and found negative by RT nested PCR. The clinical condition of the patient was improved with supportive therapy and by the de-escalation of immunosuppressive drugs [Mycophenolate mofetil (MMF; 1 g/day), cyclosporin (1 mg/kg/day)]. However WNV meningoencephalitis recurred one month later. The patient presented with fever, myalgia, confusions, leukocytosis, anemia, and repeating WNV-RNA positivity in CSF. This time cyclosporin was stopped, MMF was given in low dose (1 g/day), and high dose parenteral acyclovir and intravenous immunoglobulin (400 mg/kg/day, 7 days) were initiated. The patient recovered completely after 10 days without any neurological abnormalities. In conclusion, especially in endemic areas, WNV should be considered in the differential diagnosis of CNS infections develop in solid organ transplant cases and patients with other immunodeficiencies who present with fever, generalized myalgia, gastrointestinal symptoms and/or neurological disorders.
Channel-fill coal beds along the western margin of the Eastern Kentucky Coal Field
Eble, C.F.; Greb, S.F.
1997-01-01
Four channel-filling coal beds from the lower part of the Breathitt Formation (lower Middle Pennsylvanian, late Westphalian A) were examined palynologically, petrographically and geochemically to determine the paleoenvironmental conditions under which these peats accumulated. These results were then compared with detailed sedimentological analyses of the strata overlying the coal in the channels to see if any genetic relationship between coal composition and the origin of the overburden could be drawn. All four of the coal beds used in this study are located in the western-most part of the Eastern Kentucky Coal Field and occur at, or near, the Early Pennsylvanian unconformity (0-30 m). Lycospora and Densosporites (and related crassicingulate taxa, e.g. Cristatisporites, Cingulizonates and Radiizonates) dominate the studied assemblages, with Granulatisporites (and related trilete, sphaerotriangular genera, e.g. Leiotriletes and Lophotriletes), Laevigatosporites and Schulzospora being common accessory genera. Petrographically, all four coals contain high percentages of vitrinite macerals (avg. 78.6% mineral matter free), moderate amounts of liptinite (or exinite) macerals (avg. 14.9%, mmf) and low percentages of inertinite macerals (avg. 6.5%, mmf). Strata above the coals consist of dark, carbonaceous shales, and heterolithic strata that exhibit varying degrees of bioturbation. Commonly occurring trace fossils include Arenicolites, Monocraterion, Planolites and Skolithos. Although marine-influenced strata, as determined from detailed sedimentology and ichnology (the study of trace fossils), covers all four coal beds, they are not uniformly high in total total sulfur content as might be expected. Rather they are extremely variable, ranging from 1-9% (dry basis) total sulfur. Ash yields are also variable ranging from 6.2-54.3% (dry basis). It is probable that the origin of the very first sediments covering the peat, as well as the amount of brackish water influence during peat accumulation, were important factors in determining the total sulfur content of the resultant coal. Initial sedimentation of fresh water clays and silts may have acted as a barrier to downward percolation/diffusion of sulfate bearing waters, or may have served as a site for sulfide formation, thereby keeping the total sulfur content of the underlying coal low. If initial sedimentation was of brackish or marine origin, as indicated by bioturbated laminae directly above the coal, or if the peat was subject to frequent brackish or marine water influence during accumulation, then sulfide generation might proceed unchecked, resulting in high sulfur coal.
NASA Technical Reports Server (NTRS)
Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Ackley, Keith A.; Crump, Wes; Sanders, Les
1991-01-01
The design of the Framework Processor (FP) component of the Framework Programmable Software Development Platform (FFP) is described. The FFP is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software development environment. Guided by the model, this Framework Processor will take advantage of an integrated operating environment to provide automated support for the management and control of the software development process so that costly mistakes during the development phase can be eliminated.
Translation from UML to Markov Model: A Performance Modeling Framework
NASA Astrophysics Data System (ADS)
Khan, Razib Hayat; Heegaard, Poul E.
Performance engineering focuses on the quantitative investigation of the behavior of a system during the early phase of the system development life cycle. Bearing this on mind, we delineate a performance modeling framework of the application for communication system that proposes a translation process from high level UML notation to Continuous Time Markov Chain model (CTMC) and solves the model for relevant performance metrics. The framework utilizes UML collaborations, activity diagrams and deployment diagrams to be used for generating performance model for a communication system. The system dynamics will be captured by UML collaboration and activity diagram as reusable specification building blocks, while deployment diagram highlights the components of the system. The collaboration and activity show how reusable building blocks in the form of collaboration can compose together the service components through input and output pin by highlighting the behavior of the components and later a mapping between collaboration and system component identified by deployment diagram will be delineated. Moreover the UML models are annotated to associate performance related quality of service (QoS) information which is necessary for solving the performance model for relevant performance metrics through our proposed framework. The applicability of our proposed performance modeling framework in performance evaluation is delineated in the context of modeling a communication system.
Bayesian calibration for electrochemical thermal model of lithium-ion cells
NASA Astrophysics Data System (ADS)
Tagade, Piyush; Hariharan, Krishnan S.; Basu, Suman; Verma, Mohan Kumar Singh; Kolake, Subramanya Mayya; Song, Taewon; Oh, Dukjin; Yeo, Taejung; Doo, Seokgwang
2016-07-01
Pseudo-two dimensional electrochemical thermal (P2D-ECT) model contains many parameters that are difficult to evaluate experimentally. Estimation of these model parameters is challenging due to computational cost and the transient model. Due to lack of complete physical understanding, this issue gets aggravated at extreme conditions like low temperature (LT) operations. This paper presents a Bayesian calibration framework for estimation of the P2D-ECT model parameters. The framework uses a matrix variate Gaussian process representation to obtain a computationally tractable formulation for calibration of the transient model. Performance of the framework is investigated for calibration of the P2D-ECT model across a range of temperatures (333 Ksbnd 263 K) and operating protocols. In the absence of complete physical understanding, the framework also quantifies structural uncertainty in the calibrated model. This information is used by the framework to test validity of the new physical phenomena before incorporation in the model. This capability is demonstrated by introducing temperature dependence on Bruggeman's coefficient and lithium plating formation at LT. With the incorporation of new physics, the calibrated P2D-ECT model accurately predicts the cell voltage with high confidence. The accurate predictions are used to obtain new insights into the low temperature lithium ion cell behavior.
NoSQL Based 3D City Model Management System
NASA Astrophysics Data System (ADS)
Mao, B.; Harrie, L.; Cao, J.; Wu, Z.; Shen, J.
2014-04-01
To manage increasingly complicated 3D city models, a framework based on NoSQL database is proposed in this paper. The framework supports import and export of 3D city model according to international standards such as CityGML, KML/COLLADA and X3D. We also suggest and implement 3D model analysis and visualization in the framework. For city model analysis, 3D geometry data and semantic information (such as name, height, area, price and so on) are stored and processed separately. We use a Map-Reduce method to deal with the 3D geometry data since it is more complex, while the semantic analysis is mainly based on database query operation. For visualization, a multiple 3D city representation structure CityTree is implemented within the framework to support dynamic LODs based on user viewpoint. Also, the proposed framework is easily extensible and supports geoindexes to speed up the querying. Our experimental results show that the proposed 3D city management system can efficiently fulfil the analysis and visualization requirements.
A Regularized Volumetric Fusion Framework for Large-Scale 3D Reconstruction
NASA Astrophysics Data System (ADS)
Rajput, Asif; Funk, Eugen; Börner, Anko; Hellwich, Olaf
2018-07-01
Modern computational resources combined with low-cost depth sensing systems have enabled mobile robots to reconstruct 3D models of surrounding environments in real-time. Unfortunately, low-cost depth sensors are prone to produce undesirable estimation noise in depth measurements which result in either depth outliers or introduce surface deformations in the reconstructed model. Conventional 3D fusion frameworks integrate multiple error-prone depth measurements over time to reduce noise effects, therefore additional constraints such as steady sensor movement and high frame-rates are required for high quality 3D models. In this paper we propose a generic 3D fusion framework with controlled regularization parameter which inherently reduces noise at the time of data fusion. This allows the proposed framework to generate high quality 3D models without enforcing additional constraints. Evaluation of the reconstructed 3D models shows that the proposed framework outperforms state of art techniques in terms of both absolute reconstruction error and processing time.
Boehm, Udo; Steingroever, Helen; Wagenmakers, Eric-Jan
2018-06-01
An important tool in the advancement of cognitive science are quantitative models that represent different cognitive variables in terms of model parameters. To evaluate such models, their parameters are typically tested for relationships with behavioral and physiological variables that are thought to reflect specific cognitive processes. However, many models do not come equipped with the statistical framework needed to relate model parameters to covariates. Instead, researchers often revert to classifying participants into groups depending on their values on the covariates, and subsequently comparing the estimated model parameters between these groups. Here we develop a comprehensive solution to the covariate problem in the form of a Bayesian regression framework. Our framework can be easily added to existing cognitive models and allows researchers to quantify the evidential support for relationships between covariates and model parameters using Bayes factors. Moreover, we present a simulation study that demonstrates the superiority of the Bayesian regression framework to the conventional classification-based approach.
NASA Astrophysics Data System (ADS)
Smith, B.
2015-12-01
In 2014, eight Department of Energy (DOE) national laboratories, four academic institutions, one company, and the National Centre for Atmospheric Research combined forces in a project called Accelerated Climate Modeling for Energy (ACME) with the goal to speed Earth system model development for climate and energy. Over the planned 10-year span, the project will conduct simulations and modeling on DOE's most powerful high-performance computing systems at Oak Ridge, Argonne, and Lawrence Berkeley Leadership Compute Facilities. A key component of the ACME project is the development of an interactive test bed for the advanced Earth system model. Its execution infrastructure will accelerate model development and testing cycles. The ACME Workflow Group is leading the efforts to automate labor-intensive tasks, provide intelligent support for complex tasks and reduce duplication of effort through collaboration support. As part of this new workflow environment, we have created a diagnostic, metric, and intercomparison Python framework, called UVCMetrics, to aid in the testing-to-production execution of the ACME model. The framework exploits similarities among different diagnostics to compactly support diagnosis of new models. It presently focuses on atmosphere and land but is designed to support ocean and sea ice model components as well. This framework is built on top of the existing open-source software framework known as the Ultrascale Visualization Climate Data Analysis Tools (UV-CDAT). Because of its flexible framework design, scientists and modelers now can generate thousands of possible diagnostic outputs. These diagnostics can compare model runs, compare model vs. observation, or simply verify a model is physically realistic. Additional diagnostics are easily integrated into the framework, and our users have already added several. Diagnostics can be generated, viewed, and manipulated from the UV-CDAT graphical user interface, Python command line scripts and programs, and web browsers. The framework is designed to be scalable to large datasets, yet easy to use and familiar to scientists using previous tools. Integration in the ACME overall user interface facilitates data publication, further analysis, and quick feedback to model developers and scientists making component or coupled model runs.
Field Markup Language: biological field representation in XML.
Chang, David; Lovell, Nigel H; Dokos, Socrates
2007-01-01
With an ever increasing number of biological models available on the internet, a standardized modeling framework is required to allow information to be accessed or visualized. Based on the Physiome Modeling Framework, the Field Markup Language (FML) is being developed to describe and exchange field information for biological models. In this paper, we describe the basic features of FML, its supporting application framework and its ability to incorporate CellML models to construct tissue-scale biological models. As a typical application example, we present a spatially-heterogeneous cardiac pacemaker model which utilizes both FML and CellML to describe and solve the underlying equations of electrical activation and propagation.
Tyler Jon Smith; Lucy Amanda Marshall
2010-01-01
Model selection is an extremely important aspect of many hydrologic modeling studies because of the complexity, variability, and uncertainty that surrounds the current understanding of watershed-scale systems. However, development and implementation of a complete precipitation-runoff modeling framework, from model selection to calibration and uncertainty analysis, are...
Digging into the corona: A modeling framework trained with Sun-grazing comet observations
NASA Astrophysics Data System (ADS)
Jia, Y. D.; Pesnell, W. D.; Bryans, P.; Downs, C.; Liu, W.; Schwartz, S. J.
2017-12-01
Images of comets diving into the low corona have been captured a few times in the past decade. Structures visible at various wavelengths during these encounters indicate a strong variation of the ambient conditions of the corona. We combine three numerical models: a global coronal model, a particle transportation model, and a cometary plasma interaction model into one framework to model the interaction of such Sun-grazing comets with plasma in the low corona. In our framework, cometary vapors are ionized via multiple channels and then captured by the coronal magnetic field. In seconds, these ions are further ionized into their highest charge state, which is revealed by certain coronal emission lines. Constrained by observations, we apply our framework to trace back to the local conditions of the ambient corona, and their spatial/time variation over a broad range of scales. Once trained by multiple stages of the comet's journey in the low corona, we illustrate how this framework can leverage these unique observations to probe the structure of the solar corona and solar wind.
Colaborated Architechture Framework for Composition UML 2.0 in Zachman Framework
NASA Astrophysics Data System (ADS)
Hermawan; Hastarista, Fika
2016-01-01
Zachman Framework (ZF) is the framework of enterprise architechture that most widely adopted in the Enterprise Information System (EIS) development. In this study, has been developed Colaborated Architechture Framework (CAF) to collaborate ZF with Unified Modeling Language (UML) 2.0 modeling. The CAF provides the composition of ZF matrix that each cell is consist of the Model Driven architechture (MDA) from the various UML models and many Software Requirement Specification (SRS) documents. Implementation of this modeling is used to develops Enterprise Resource Planning (ERP). Because ERP have a coverage of applications in large numbers and complexly relations, it is necessary to use Agile Model Driven Design (AMDD) approach as an advanced method to transforms MDA into components of application modules with efficiently and accurately. Finally, through the using of the CAF, give good achievement in fullfilment the needs from all stakeholders that are involved in the overall process stage of Rational Unified Process (RUP), and also obtaining a high satisfaction to fullfiled the functionality features of the ERP software in PT. Iglas (Persero) Gresik.
Automatic Earth observation data service based on reusable geo-processing workflow
NASA Astrophysics Data System (ADS)
Chen, Nengcheng; Di, Liping; Gong, Jianya; Yu, Genong; Min, Min
2008-12-01
A common Sensor Web data service framework for Geo-Processing Workflow (GPW) is presented as part of the NASA Sensor Web project. This framework consists of a data service node, a data processing node, a data presentation node, a Catalogue Service node and BPEL engine. An abstract model designer is used to design the top level GPW model, model instantiation service is used to generate the concrete BPEL, and the BPEL execution engine is adopted. The framework is used to generate several kinds of data: raw data from live sensors, coverage or feature data, geospatial products, or sensor maps. A scenario for an EO-1 Sensor Web data service for fire classification is used to test the feasibility of the proposed framework. The execution time and influences of the service framework are evaluated. The experiments show that this framework can improve the quality of services for sensor data retrieval and processing.
Sun, Mingzhu; Xu, Hui; Zeng, Xingjuan; Zhao, Xin
2017-01-01
There are various fantastic biological phenomena in biological pattern formation. Mathematical modeling using reaction-diffusion partial differential equation systems is employed to study the mechanism of pattern formation. However, model parameter selection is both difficult and time consuming. In this paper, a visual feedback simulation framework is proposed to calculate the parameters of a mathematical model automatically based on the basic principle of feedback control. In the simulation framework, the simulation results are visualized, and the image features are extracted as the system feedback. Then, the unknown model parameters are obtained by comparing the image features of the simulation image and the target biological pattern. Considering two typical applications, the visual feedback simulation framework is applied to fulfill pattern formation simulations for vascular mesenchymal cells and lung development. In the simulation framework, the spot, stripe, labyrinthine patterns of vascular mesenchymal cells, the normal branching pattern and the branching pattern lacking side branching for lung branching are obtained in a finite number of iterations. The simulation results indicate that it is easy to achieve the simulation targets, especially when the simulation patterns are sensitive to the model parameters. Moreover, this simulation framework can expand to other types of biological pattern formation. PMID:28225811
Sun, Mingzhu; Xu, Hui; Zeng, Xingjuan; Zhao, Xin
2017-01-01
There are various fantastic biological phenomena in biological pattern formation. Mathematical modeling using reaction-diffusion partial differential equation systems is employed to study the mechanism of pattern formation. However, model parameter selection is both difficult and time consuming. In this paper, a visual feedback simulation framework is proposed to calculate the parameters of a mathematical model automatically based on the basic principle of feedback control. In the simulation framework, the simulation results are visualized, and the image features are extracted as the system feedback. Then, the unknown model parameters are obtained by comparing the image features of the simulation image and the target biological pattern. Considering two typical applications, the visual feedback simulation framework is applied to fulfill pattern formation simulations for vascular mesenchymal cells and lung development. In the simulation framework, the spot, stripe, labyrinthine patterns of vascular mesenchymal cells, the normal branching pattern and the branching pattern lacking side branching for lung branching are obtained in a finite number of iterations. The simulation results indicate that it is easy to achieve the simulation targets, especially when the simulation patterns are sensitive to the model parameters. Moreover, this simulation framework can expand to other types of biological pattern formation.
Modules: A New Tool in the Emissions Modeling Framework
DOT National Transportation Integrated Search
2017-08-14
The Emissions Modeling Framework (EMF) is used by various organizations, including the US Environmental Protection Agency, to manage their emissions inventories, projections, and emissions modeling scenarios. Modules are a new tool under develo...
NASA Astrophysics Data System (ADS)
Maechling, P. J.; Taborda, R.; Callaghan, S.; Shaw, J. H.; Plesch, A.; Olsen, K. B.; Jordan, T. H.; Goulet, C. A.
2017-12-01
Crustal seismic velocity models and datasets play a key role in regional three-dimensional numerical earthquake ground-motion simulation, full waveform tomography, modern physics-based probabilistic earthquake hazard analysis, as well as in other related fields including geophysics, seismology, and earthquake engineering. The standard material properties provided by a seismic velocity model are P- and S-wave velocities and density for any arbitrary point within the geographic volume for which the model is defined. Many seismic velocity models and datasets are constructed by synthesizing information from multiple sources and the resulting models are delivered to users in multiple file formats, such as text files, binary files, HDF-5 files, structured and unstructured grids, and through computer applications that allow for interactive querying of material properties. The Southern California Earthquake Center (SCEC) has developed the Unified Community Velocity Model (UCVM) software framework to facilitate the registration and distribution of existing and future seismic velocity models to the SCEC community. The UCVM software framework is designed to provide a standard query interface to multiple, alternative velocity models, even if the underlying velocity models are defined in different formats or use different geographic projections. The UCVM framework provides a comprehensive set of open-source tools for querying seismic velocity model properties, combining regional 3D models and 1D background models, visualizing 3D models, and generating computational models in the form of regular grids or unstructured meshes that can be used as inputs for ground-motion simulations. The UCVM framework helps researchers compare seismic velocity models and build equivalent simulation meshes from alternative velocity models. These capabilities enable researchers to evaluate the impact of alternative velocity models in ground-motion simulations and seismic hazard analysis applications. In this poster, we summarize the key components of the UCVM framework and describe the impact it has had in various computational geoscientific applications.
Modeling spray drift and runoff-related inputs of pesticides to receiving water.
Zhang, Xuyang; Luo, Yuzhou; Goh, Kean S
2018-03-01
Pesticides move to surface water via various pathways including surface runoff, spray drift and subsurface flow. Little is known about the relative contributions of surface runoff and spray drift in agricultural watersheds. This study develops a modeling framework to address the contribution of spray drift to the total loadings of pesticides in receiving water bodies. The modeling framework consists of a GIS module for identifying drift potential, the AgDRIFT model for simulating spray drift, and the Soil and Water Assessment Tool (SWAT) for simulating various hydrological and landscape processes including surface runoff and transport of pesticides. The modeling framework was applied on the Orestimba Creek Watershed, California. Monitoring data collected from daily samples were used for model evaluation. Pesticide mass deposition on the Orestimba Creek ranged from 0.08 to 6.09% of applied mass. Monitoring data suggests that surface runoff was the major pathway for pesticide entering water bodies, accounting for 76% of the annual loading; the rest 24% from spray drift. The results from the modeling framework showed 81 and 19%, respectively, for runoff and spray drift. Spray drift contributed over half of the mass loading during summer months. The slightly lower spray drift contribution as predicted by the modeling framework was mainly due to SWAT's under-prediction of pesticide mass loading during summer and over-prediction of the loading during winter. Although model simulations were associated with various sources of uncertainties, the overall performance of the modeling framework was satisfactory as evaluated by multiple statistics: for simulation of daily flow, the Nash-Sutcliffe Efficiency Coefficient (NSE) ranged from 0.61 to 0.74 and the percent bias (PBIAS) < 28%; for daily pesticide loading, NSE = 0.18 and PBIAS = -1.6%. This modeling framework will be useful for assessing the relative exposure from pesticides related to spray drift and runoff in receiving waters and the design of management practices for mitigating pesticide exposure within a watershed. Published by Elsevier Ltd.
Clinical time series prediction: towards a hierarchical dynamical system framework
Liu, Zitao; Hauskrecht, Milos
2014-01-01
Objective Developing machine learning and data mining algorithms for building temporal models of clinical time series is important for understanding of the patient condition, the dynamics of a disease, effect of various patient management interventions and clinical decision making. In this work, we propose and develop a novel hierarchical framework for modeling clinical time series data of varied length and with irregularly sampled observations. Materials and methods Our hierarchical dynamical system framework for modeling clinical time series combines advantages of the two temporal modeling approaches: the linear dynamical system and the Gaussian process. We model the irregularly sampled clinical time series by using multiple Gaussian process sequences in the lower level of our hierarchical framework and capture the transitions between Gaussian processes by utilizing the linear dynamical system. The experiments are conducted on the complete blood count (CBC) panel data of 1000 post-surgical cardiac patients during their hospitalization. Our framework is evaluated and compared to multiple baseline approaches in terms of the mean absolute prediction error and the absolute percentage error. Results We tested our framework by first learning the time series model from data for the patient in the training set, and then applying the model in order to predict future time series values on the patients in the test set. We show that our model outperforms multiple existing models in terms of its predictive accuracy. Our method achieved a 3.13% average prediction accuracy improvement on ten CBC lab time series when it was compared against the best performing baseline. A 5.25% average accuracy improvement was observed when only short-term predictions were considered. Conclusion A new hierarchical dynamical system framework that lets us model irregularly sampled time series data is a promising new direction for modeling clinical time series and for improving their predictive performance. PMID:25534671
High Spatial Resolution Multi-Organ Finite Element Modeling of Ventricular-Arterial Coupling
Shavik, Sheikh Mohammad; Jiang, Zhenxiang; Baek, Seungik; Lee, Lik Chuan
2018-01-01
While it has long been recognized that bi-directional interaction between the heart and the vasculature plays a critical role in the proper functioning of the cardiovascular system, a comprehensive study of this interaction has largely been hampered by a lack of modeling framework capable of simultaneously accommodating high-resolution models of the heart and vasculature. Here, we address this issue and present a computational modeling framework that couples finite element (FE) models of the left ventricle (LV) and aorta to elucidate ventricular—arterial coupling in the systemic circulation. We show in a baseline simulation that the framework predictions of (1) LV pressure—volume loop, (2) aorta pressure—diameter relationship, (3) pressure—waveforms of the aorta, LV, and left atrium (LA) over the cardiac cycle are consistent with the physiological measurements found in healthy human. To develop insights of ventricular-arterial interactions, the framework was then used to simulate how alterations in the geometrical or, material parameter(s) of the aorta affect the LV and vice versa. We show that changing the geometry and microstructure of the aorta model in the framework led to changes in the functional behaviors of both LV and aorta that are consistent with experimental observations. On the other hand, changing contractility and passive stiffness of the LV model in the framework also produced changes in both the LV and aorta functional behaviors that are consistent with physiology principles. PMID:29551977
NASA Astrophysics Data System (ADS)
Onken, Jeffrey
This dissertation introduces a multidisciplinary framework for the enabling of future research and analysis of alternatives for control centers for real-time operations of safety-critical systems. The multidisciplinary framework integrates functional and computational models that describe the dynamics in fundamental concepts of previously disparate engineering and psychology research disciplines, such as group performance and processes, supervisory control, situation awareness, events and delays, and expertise. The application in this dissertation is the real-time operations within the NASA Mission Control Center in Houston, TX. This dissertation operationalizes the framework into a model and simulation, which simulates the functional and computational models in the framework according to user-configured scenarios for a NASA human-spaceflight mission. The model and simulation generates data according to the effectiveness of the mission-control team in supporting the completion of mission objectives and detecting, isolating, and recovering from anomalies. Accompanying the multidisciplinary framework is a proof of concept, which demonstrates the feasibility of such a framework. The proof of concept demonstrates that variability occurs where expected based on the models. The proof of concept also demonstrates that the data generated from the model and simulation is useful for analyzing and comparing MCC configuration alternatives because an investigator can give a diverse set of scenarios to the simulation and the output compared in detail to inform decisions about the effect of MCC configurations on mission operations performance.
ERIC Educational Resources Information Center
Wang, Shiyu; Yang, Yan; Culpepper, Steven Andrew; Douglas, Jeffrey A.
2018-01-01
A family of learning models that integrates a cognitive diagnostic model and a higher-order, hidden Markov model in one framework is proposed. This new framework includes covariates to model skill transition in the learning environment. A Bayesian formulation is adopted to estimate parameters from a learning model. The developed methods are…
NASA Astrophysics Data System (ADS)
Peckham, S. D.
2013-12-01
Model coupling frameworks like CSDMS (Community Surface Dynamics Modeling System) and ESMF (Earth System Modeling Framework) have developed mechanisms that allow heterogeneous sets of process models to be assembled in a plug-and-play manner to create composite "system models". These mechanisms facilitate code reuse, but must simultaneously satisfy many different design criteria. They must be able to mediate or compensate for differences between the process models, such as their different programming languages, computational grids, time-stepping schemes, variable names and variable units. However, they must achieve this interoperability in a way that: (1) is noninvasive, requiring only relatively small and isolated changes to the original source code, (2) does not significantly reduce performance, (3) is not time-consuming or confusing for a model developer to implement, (4) can very easily be updated to accommodate new versions of a given process model and (5) does not shift the burden of providing model interoperability to the model developers, e.g. by requiring them to provide their output in specific forms that meet the input requirements of other models. In tackling these design challenges, model framework developers have learned that the best solution is to provide each model with a simple, standardized interface, i.e. a set of standardized functions that make the model: (1) fully-controllable by a caller (e.g. a model framework) and (2) self-describing. Model control functions are separate functions that allow a caller to initialize the model, advance the model's state variables in time and finalize the model. Model description functions allow a caller to retrieve detailed information on the model's input and output variables, its computational grid and its timestepping scheme. If the caller is a modeling framework, it can compare the answers to these queries with similar answers from other process models in a collection and then automatically call framework service components as necessary to mediate the differences between the coupled models. This talk will first review two key products of the CSDMS project, namely a standardized model interface called the Basic Model Interface (BMI) and the CSDMS Standard Names. The standard names are used in conjunction with BMI to provide a semantic matching mechanism that allows output variables from one process model to be reliably used as input variables to other process models in a collection. They include not just a standardized naming scheme for model variables, but also a standardized set of terms for describing the attributes and assumptions of a given model. To illustrate the power of standardized model interfaces and metadata, a smart, light-weight modeling framework written in Python will be introduced that can automatically (without user intervention) couple a set of BMI-enabled hydrologic process components together to create a spatial hydrologic model. The same mechanisms could also be used to provide seamless integration (import/export) of data and models.
Communication: Introducing prescribed biases in out-of-equilibrium Markov models
NASA Astrophysics Data System (ADS)
Dixit, Purushottam D.
2018-03-01
Markov models are often used in modeling complex out-of-equilibrium chemical and biochemical systems. However, many times their predictions do not agree with experiments. We need a systematic framework to update existing Markov models to make them consistent with constraints that are derived from experiments. Here, we present a framework based on the principle of maximum relative path entropy (minimum Kullback-Leibler divergence) to update Markov models using stationary state and dynamical trajectory-based constraints. We illustrate the framework using a biochemical model network of growth factor-based signaling. We also show how to find the closest detailed balanced Markov model to a given Markov model. Further applications and generalizations are discussed.
NASA Astrophysics Data System (ADS)
Peckham, Scott
2016-04-01
Over the last decade, model coupling frameworks like CSDMS (Community Surface Dynamics Modeling System) and ESMF (Earth System Modeling Framework) have developed mechanisms that make it much easier for modelers to connect heterogeneous sets of process models in a plug-and-play manner to create composite "system models". These mechanisms greatly simplify code reuse, but must simultaneously satisfy many different design criteria. They must be able to mediate or compensate for differences between the process models, such as their different programming languages, computational grids, time-stepping schemes, variable names and variable units. However, they must achieve this interoperability in a way that: (1) is noninvasive, requiring only relatively small and isolated changes to the original source code, (2) does not significantly reduce performance, (3) is not time-consuming or confusing for a model developer to implement, (4) can very easily be updated to accommodate new versions of a given process model and (5) does not shift the burden of providing model interoperability to the model developers. In tackling these design challenges, model framework developers have learned that the best solution is to provide each model with a simple, standardized interface, i.e. a set of standardized functions that make the model: (1) fully-controllable by a caller (e.g. a model framework) and (2) self-describing with standardized metadata. Model control functions are separate functions that allow a caller to initialize the model, advance the model's state variables in time and finalize the model. Model description functions allow a caller to retrieve detailed information on the model's input and output variables, its computational grid and its timestepping scheme. If the caller is a modeling framework, it can use the self description functions to learn about each process model in a collection to be coupled and then automatically call framework service components (e.g. regridders, time interpolators and unit converters) as necessary to mediate the differences between them so they can work together. This talk will first review two key products of the CSDMS project, namely a standardized model interface called the Basic Model Interface (BMI) and the CSDMS Standard Names. The standard names are used in conjunction with BMI to provide a semantic matching mechanism that allows output variables from one process model or data set to be reliably used as input variables to other process models in a collection. They include not just a standardized naming scheme for model variables, but also a standardized set of terms for describing the attributes and assumptions of a given model. Recent efforts to bring powerful uncertainty analysis and inverse modeling toolkits such as DAKOTA into modeling frameworks will also be described. This talk will conclude with an overview of several related modeling projects that have been funded by NSF's EarthCube initiative, namely the Earth System Bridge, OntoSoft and GeoSemantics projects.
Crops in silico: A community wide multi-scale computational modeling framework of plant canopies
NASA Astrophysics Data System (ADS)
Srinivasan, V.; Christensen, A.; Borkiewic, K.; Yiwen, X.; Ellis, A.; Panneerselvam, B.; Kannan, K.; Shrivastava, S.; Cox, D.; Hart, J.; Marshall-Colon, A.; Long, S.
2016-12-01
Current crop models predict a looming gap between supply and demand for primary foodstuffs over the next 100 years. While significant yield increases were achieved in major food crops during the early years of the green revolution, the current rates of yield increases are insufficient to meet future projected food demand. Furthermore, with projected reduction in arable land, decrease in water availability, and increasing impacts of climate change on future food production, innovative technologies are required to sustainably improve crop yield. To meet these challenges, we are developing Crops in silico (Cis), a biologically informed, multi-scale, computational modeling framework that can facilitate whole plant simulations of crop systems. The Cis framework is capable of linking models of gene networks, protein synthesis, metabolic pathways, physiology, growth, and development in order to investigate crop response to different climate scenarios and resource constraints. This modeling framework will provide the mechanistic details to generate testable hypotheses toward accelerating directed breeding and engineering efforts to increase future food security. A primary objective for building such a framework is to create synergy among an inter-connected community of biologists and modelers to create a realistic virtual plant. This framework advantageously casts the detailed mechanistic understanding of individual plant processes across various scales in a common scalable framework that makes use of current advances in high performance and parallel computing. We are currently designing a user friendly interface that will make this tool equally accessible to biologists and computer scientists. Critically, this framework will provide the community with much needed tools for guiding future crop breeding and engineering, understanding the emergent implications of discoveries at the molecular level for whole plant behavior, and improved prediction of plant and ecosystem responses to the environment.
National water, food, and trade modeling framework: The case of Egypt.
Abdelkader, A; Elshorbagy, A; Tuninetti, M; Laio, F; Ridolfi, L; Fahmy, H; Hoekstra, A Y
2018-10-15
This paper introduces a modeling framework for the analysis of real and virtual water flows at national scale. The framework has two components: (1) a national water model that simulates agricultural, industrial and municipal water uses, and available water and land resources; and (2) an international virtual water trade model that captures national virtual water exports and imports related to trade in crops and animal products. This National Water, Food & Trade (NWFT) modeling framework is applied to Egypt, a water-poor country and the world's largest importer of wheat. Egypt's food and water gaps and the country's food (virtual water) imports are estimated over a baseline period (1986-2013) and projected up to 2050 based on four scenarios. Egypt's food and water gaps are growing rapidly as a result of steep population growth and limited water resources. The NWFT modeling framework shows the nexus of the population dynamics, water uses for different sectors, and their compounding effects on Egypt's food gap and water self-sufficiency. The sensitivity analysis reveals that for solving Egypt's water and food problem non-water-based solutions like educational, health, and awareness programs aimed at lowering population growth will be an essential addition to the traditional water resources development solution. Both the national and the global models project similar trends of Egypt's food gap. The NWFT modeling framework can be easily adapted to other nations and regions. Copyright © 2018. Published by Elsevier B.V.
A modeling framework for exposing risks in complex systems.
Sharit, J
2000-08-01
This article introduces and develops a modeling framework for exposing risks in the form of human errors and adverse consequences in high-risk systems. The modeling framework is based on two components: a two-dimensional theory of accidents in systems developed by Perrow in 1984, and the concept of multiple system perspectives. The theory of accidents differentiates systems on the basis of two sets of attributes. One set characterizes the degree to which systems are interactively complex; the other emphasizes the extent to which systems are tightly coupled. The concept of multiple perspectives provides alternative descriptions of the entire system that serve to enhance insight into system processes. The usefulness of these two model components derives from a modeling framework that cross-links them, enabling a variety of work contexts to be exposed and understood that would otherwise be very difficult or impossible to identify. The model components and the modeling framework are illustrated in the case of a large and comprehensive trauma care system. In addition to its general utility in the area of risk analysis, this methodology may be valuable in applications of current methods of human and system reliability analysis in complex and continually evolving high-risk systems.
Modeling Philosophies and Applications
All models begin with a framework and a set of assumptions and limitations that go along with that framework. In terms of fracing and RA, there are several places where models and parameters must be chosen to complete hazard identification.
NASA Astrophysics Data System (ADS)
Mortensen, Mikael; Langtangen, Hans Petter; Wells, Garth N.
2011-09-01
Finding an appropriate turbulence model for a given flow case usually calls for extensive experimentation with both models and numerical solution methods. This work presents the design and implementation of a flexible, programmable software framework for assisting with numerical experiments in computational turbulence. The framework targets Reynolds-averaged Navier-Stokes models, discretized by finite element methods. The novel implementation makes use of Python and the FEniCS package, the combination of which leads to compact and reusable code, where model- and solver-specific code resemble closely the mathematical formulation of equations and algorithms. The presented ideas and programming techniques are also applicable to other fields that involve systems of nonlinear partial differential equations. We demonstrate the framework in two applications and investigate the impact of various linearizations on the convergence properties of nonlinear solvers for a Reynolds-averaged Navier-Stokes model.
Evidence-Based Leadership Development: The 4L Framework
ERIC Educational Resources Information Center
Scott, Shelleyann; Webber, Charles F.
2008-01-01
Purpose: This paper aims to use the results of three research initiatives to present the life-long learning leader 4L framework, a model for leadership development intended for use by designers and providers of leadership development programming. Design/methodology/approach: The 4L model is a conceptual framework that emerged from the analysis of…
ERIC Educational Resources Information Center
Preston, Kathleen Suzanne Johnson; Parral, Skye N.; Gottfried, Allen W.; Oliver, Pamella H.; Gottfried, Adele Eskeles; Ibrahim, Sirena M.; Delany, Danielle
2015-01-01
A psychometric analysis was conducted using the nominal response model under the item response theory framework to construct the Positive Family Relationships scale. Using data from the Fullerton Longitudinal Study, this scale was constructed within a long-term longitudinal framework spanning middle childhood through adolescence. Items tapping…
ERIC Educational Resources Information Center
Erkut, Sumru; Szalacha, Laura A.; Coll, Cynthia Garcia
2005-01-01
A theoretical framework is proposed for studying minority young men's involvement with their babies that combines the integrative model of minority youth development and a life course developmental perspective with Lamb's revised four-factor model of father involvement. This framework posits a relationship between demographic and family background…
USDA-ARS?s Scientific Manuscript database
Environmental modeling framework (EMF) design goals are multi-dimensional and often include many aspects of general software framework development. Many functional capabilities offered by current EMFs are closely related to interoperability and reuse aspects. For example, an EMF needs to support dev...