30 CFR 7.99 - Critical characteristics.

Code of Federal Regulations, 2013 CFR

2013-07-01

... proper adjustments. (h) Material and dimensions of gaskets that are essential in maintaining the explosion-proof integrity of the diesel power package. (i) Dimensions and assembly of flame arresters. (j...

An incomplete assembly with thresholding algorithm for systems of reaction-diffusion equations in three space dimensions IAT for reaction-diffusion systems

NASA Astrophysics Data System (ADS)

Moore, Peter K.

2003-07-01

Solving systems of reaction-diffusion equations in three space dimensions can be prohibitively expensive both in terms of storage and CPU time. Herein, I present a new incomplete assembly procedure that is designed to reduce storage requirements. Incomplete assembly is analogous to incomplete factorization in that only a fixed number of nonzero entries are stored per row and a drop tolerance is used to discard small values. The algorithm is incorporated in a finite element method-of-lines code and tested on a set of reaction-diffusion systems. The effect of incomplete assembly on CPU time and storage and on the performance of the temporal integrator DASPK, algebraic solver GMRES and preconditioner ILUT is studied.

Moderating Effects of Prevention-Focus on the Paths from Two Insecure Attachment Dimensions to Depression.

PubMed

Lee, Dong-Gwi; Park, Jae Joon; Bae, Byeong Hoon; Lim, Hyun-Woo

2018-04-03

The present study investigated the moderating effects of prevention-focus on the paths from the dimensions of insecure attachment (attachment avoidance and attachment anxiety) to depression. Two hundred twenty eight Korean college students completed the Experience in Close Relationship - Revised Scale; the Regulatory Focus Strategies Scale; and the Center for Epidemiologic Studies Depression Scale. Results revealed a significant moderating effect for prevention-focus on the path from attachment avoidance to depression, but not on the path from attachment anxiety to depression. They further suggest that different interventions are needed for different combinations of persons' insecure attachment dimensions and levels of prevention-focus. Counseling implications and suggestions for future research are discussed.

Solution Properties of Murine Leukemia Virus Gag Protein: Differences from HIV-1 Gag▿

PubMed Central

Datta, Siddhartha A. K.; Zuo, Xiaobing; Clark, Patrick K.; Campbell, Stephen J.; Wang, Yun-Xing; Rein, Alan

2011-01-01

Immature retrovirus particles are assembled from the multidomain Gag protein. In these particles, the Gag proteins are arranged radially as elongated rods. We have previously characterized the properties of HIV-1 Gag in solution. In the absence of nucleic acid, HIV-1 Gag displays moderately weak interprotein interactions, existing in monomer-dimer equilibrium. Neutron scattering and hydrodynamic studies suggest that the protein is compact, and biochemical studies indicate that the two ends can approach close in three-dimensional space, implying the need for a significant conformational change during assembly. We now describe the properties of the Gag protein of Moloney murine leukemia virus (MLV), a gammaretrovirus. We found that this protein is very different from HIV-1 Gag: it has much weaker protein-protein interaction and is predominantly monomeric in solution. This has allowed us to study the protein by small-angle X-ray scattering and to build a low-resolution molecular envelope for the protein. We found that MLV Gag is extended in solution, with an axial ratio of ∼7, comparable to its dimensions in immature particles. Mutational analysis suggests that runs of prolines in its matrix and p12 domains and the highly charged stretch at the C terminus of its capsid domain all contribute to this extended conformation. These differences between MLV Gag and HIV-1 Gag and their implications for retroviral assembly are discussed. PMID:21917964

Specificity in mediated pathways by anxiety symptoms linking adolescent stress profiles to depressive symptoms: Results of a moderated mediation approach.

PubMed

Anyan, Frederick; Bizumic, Boris; Hjemdal, Odin

2018-03-01

We investigated the specificity in mediated pathways that separately link specific stress dimensions through anxiety to depressive symptoms and the protective utility of resilience. Thus, this study goes beyond lumping together potential mediating and moderating processes that can explain the relations between stress and (symptoms of) psychopathology and the buffering effect of resilience. Ghanaian adolescents between 13 and 17 years (female = 285; male = 244) completed the Adolescent Stress Questionnaire (ASQ), Spielberger State Anxiety Inventory (STAI), Short Mood Feeling Questionnaire (SMFQ) and the Resilience Scale for Adolescents (READ). Independent samples t-test, multivariate analysis of covariance with follow-up tests and moderated mediation analyses were performed. Evidences were found for specificity in the associations between dimensions of adolescent stressors and depressive symptoms independent of transient anxiety. Transient anxiety partly accounted for the indirect effects of eight stress dimensions on depressive symptoms. Except stress of school attendance and school/leisure conflict, resilience moderated the indirect effects of specific stress dimensions on depressive symptoms. Results suggested differences in how Ghanaian adolescents view the various stress dimensions, and mediated pathways associated with anxiety and depressive symptoms. Use of cross-sectional data does not show causal process and temporal changes over time. Findings support and clarify the specificity in the interrelations and mediated pathways among dimensions of adolescent stress, transient anxiety, and depressive symptoms. Conditional process analyses shows that resilience does not only buffer direct, but also indirect psychological adversities. Interventions for good mental health may focus on low resilience subgroups in specific stress dimensions while minimizing transient anxiety. Copyright © 2017 Elsevier B.V. All rights reserved.

Microelectromechanical (MEMS) manipulators for control of nanoparticle coupling interactions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lopez, Daniel; Wiederrecht, Gary; Gosztola, David J.

A nanopositioning system for producing a coupling interaction between a first nanoparticle and a second nanoparticle. A first MEMS positioning assembly includes an electrostatic comb drive actuator configured to selectively displace a first nanoparticle in a first dimension and an electrode configured to selectively displace the first nanoparticle in a second dimensions. Accordingly, the first nanoparticle may be selectively positioned in two dimensions to modulate the distance between the first nanoparticle and a second nanoparticle that may be coupled to a second MEMS positioning assembly. Modulating the distance between the first and second nanoparticles obtains a coupling interaction between themore » nanoparticles that alters at least one material property of the nanoparticles applicable to a variety of sensing and control applications.« less

Incremental prediction and moderating role of the perceived emotional intelligence over aggressive behavior.

PubMed

Peláez-Fernández, María Angeles; Extremera, Natalio; Fernández-Berrocal, Pablo

2014-01-01

The aim of this research was to explore the influence of Perceived Emotional Intelligence (PEI) on aggression dimensions (Physical Aggression, Verbal Aggression, Hostility, and Anger) above and beyond the effects of gender, age, and personality traits (Extraversion, Agreeableness, Conscientiousness, Neuroticism, and Openness to Experience), as well as the moderating role of PEI on the relationship between personality and aggressive behavior, among young adults. The Trait Meta-Mood Scale, the Big-Five Inventory, and the Aggression Questionnaire were administered to a 313 Spanish community sample, comprised of both males (39.0%) and females (61.0%), ranging from 14 to 69 years old (X = 24.74; SD = 9.27). Controlling the effects of age, gender, and personality, PEI dimensions (Attention, Clarity and Repair) accounted for 3% of the variance (p < .05) in Verbal Aggression and Hostility. Interaction analysis showed that all PEI subscales moderated the relationship between four out of the Big-Five personality dimensions (Extraversion, Agreeableness, Neuroticism, and Openness to Experience) and the aggression dimensions. Particularly, the interaction between Attention and Extraversion and between Clarity and Neuroticism were significant predictors of Total Aggression (b = .67, t(313) = 2.35, p < .05; b = -.71, t(313) = -2.50, p < .05). The results show evidence of the predictive and incremental validity of PEI dimensions on aggressive behavior among young adults and of the moderating role of PEI on the personality-aggression relationship.

Main and moderated effects of moral cognition and status on bullying and defending.

PubMed

Caravita, Simona C S; Gini, Gianluca; Pozzoli, Tiziana

2012-01-01

This study analyzed the relations of two dimensions of moral cognition (i.e., acceptance of moral transgression and moral disengagement) and two forms of status in the peer group (i.e., social preference and perceived popularity) with bullying and defending among 235 primary-school children and 305 middle-school early adolescents. Social status was tested as a moderator of the associations between moral cognition and bullying and defending. Participants completed self-reports assessing the two dimensions of moral cognition and peer nominations for status, bullying, and defending. Both acceptance of moral transgression and moral disengagement were associated to bullying among early adolescents only, whereas in childhood moral disengagement was linked to defending among girls. Social status moderated the associations between morality dimensions and bullying and defending. The moderating effects of status were discussed considering status as a magnifying lens for the relations between individual characteristics and social behavior. The results were also discussed with reference to age and gender differences in the associations. © 2012 Wiley Periodicals, Inc.

Solution Properties of Murine Leukemia Virus Gag Protein: Differences from HIV-1 Gag

DOE Office of Scientific and Technical Information (OSTI.GOV)

Datta, Siddhartha A.K.; Zuo, Xiaobing; Clark, Patrick K.

2012-05-09

Immature retrovirus particles are assembled from the multidomain Gag protein. In these particles, the Gag proteins are arranged radially as elongated rods. We have previously characterized the properties of HIV-1 Gag in solution. In the absence of nucleic acid, HIV-1 Gag displays moderately weak interprotein interactions, existing in monomer-dimer equilibrium. Neutron scattering and hydrodynamic studies suggest that the protein is compact, and biochemical studies indicate that the two ends can approach close in three-dimensional space, implying the need for a significant conformational change during assembly. We now describe the properties of the Gag protein of Moloney murine leukemia virus (MLV),more » a gammaretrovirus. We found that this protein is very different from HIV-1 Gag: it has much weaker protein-protein interaction and is predominantly monomeric in solution. This has allowed us to study the protein by small-angle X-ray scattering and to build a low-resolution molecular envelope for the protein. We found that MLV Gag is extended in solution, with an axial ratio of {approx}7, comparable to its dimensions in immature particles. Mutational analysis suggests that runs of prolines in its matrix and p12 domains and the highly charged stretch at the C terminus of its capsid domain all contribute to this extended conformation. These differences between MLV Gag and HIV-1 Gag and their implications for retroviral assembly are discussed.« less

Intelligent laser soldering inspection and process control

NASA Technical Reports Server (NTRS)

Vanzetti, Riccardo

1987-01-01

Component assembly on printed circuitry keeps making giant strides toward denser packaging and smaller dimensions. From a single layer to multilayer, from through holes to surface mounted components and tape applied bonds, unrelenting progress results in new, difficult problems in assembling, soldering, inspecting and controlling the manufacturing process of the new electronics. Among the major problems are the variables introduced by human operators. The small dimensions and the tight assembly tolerances are now successfully met by machines which are faster and more precise than the human hand. The same is true for soldering. But visual inspection of the solder joints is now so severely limited by the ever shrinking area accessible to the human eye that the inspector's diagnosis cannot be trusted any longer. Solutions to correcting these problems are discussed.

Association between Types of Involvement in School Bullying and Different Dimensions of Anxiety Symptoms and the Moderating Effects of Age and Gender in Taiwanese Adolescents

ERIC Educational Resources Information Center

Yen, Cheng-Fang; Huang, Mei-Feng; Kim, Young Shin; Wang, Peng-Wei; Tang, Tze-Chun; Yeh, Yi-Chun; Lin, Huang-Chi; Liu, Tai-Ling; Wu, Yu-Yu; Yang, Pinchen

2013-01-01

Objective: The aims of this cross-sectional study were to examine the associations of various types of school bullying involvement experiences with different dimensions of anxiety symptoms on the Multidimensional Anxiety Scale for Children (MASC) and to examine the moderating effects of gender and age on the associations in Taiwanese adolescent…

Neuroticism, conscientiousness and fruit consumption: exploring mediator and moderator effects in the theory of planned behaviour.

PubMed

de Bruijn, Gert-Jan; Brug, Johannes; Van Lenthe, Frank J

2009-11-01

Integrating the theory of planned behaviour (TPB) with the five-factor model (FFM) of personality may provide insight into the cognitive and motivational mechanisms linking personality with health behaviour, but this issue has received very little attention regarding fruit consumption. Mediator effects of TPB concepts in the personality-fruit consumption link, as well as moderator effects of personality in the intention-fruit consumption link, were therefore investigated in the present study. Data on fruit consumption, TPB concepts and FFM dimensions were gathered among 405 respondents in face-to-face interviews using questionnaires. Structural equation modelling was used to investigate the mediator and moderator effects. The direct effect of conscientiousness on fruit consumption was mediated by attitude and perceived behavioural control, while no direct effect of neuroticism on fruit consumption was found. Neuroticism moderated the intention-fruit consumption relationship with the weakest relationship for those scoring high on neuroticism. Conscientiousness did not moderate the intention-fruit consumption relationship. TPB variables are mediators in the conscientiousness-fruit consumption link. Whether fruit consumption is intentional may be dependent upon the personality dimension neuroticism. Personality dimensions may be a useful addition to the TPB and should be considered in health behaviour change interventions.

Lasing in a three-dimensional photonic crystal of the liquid crystal blue phase II.

PubMed

Cao, Wenyi; Muñoz, Antonio; Palffy-Muhoray, Peter; Taheri, Bahman

2002-10-01

Photonic-bandgap materials, with periodicity in one, two or three dimensions, offer control of spontaneous emission and photon localization. Low-threshold lasing has been demonstrated in two-dimensional photonic-bandgap materials, both with distributed feedback and defect modes. Liquid crystals with chiral constituents exhibit mesophases with modulated ground states. Helical cholesterics are one-dimensional, whereas blue phases are three-dimensional self-assembled photonic-bandgap structures. Although mirrorless lasing was predicted and observed in one-dimensional helical cholesteric materials and chiral ferroelectric smectic materials, it is of great interest to probe light confinement in three dimensions. Here, we report the first observations of lasing in three-dimensional photonic crystals, in the cholesteric blue phase II. Our results show that distributed feedback is realized in three dimensions, resulting in almost diffraction-limited lasing with significantly lower thresholds than in one dimension. In addition to mirrorless lasing, these self-assembled soft photonic-bandgap materials may also be useful for waveguiding, switching and sensing applications.

Self-assembling layers created by membrane proteins on gold.

PubMed

Shah, D S; Thomas, M B; Phillips, S; Cisneros, D A; Le Brun, A P; Holt, S A; Lakey, J H

2007-06-01

Membrane systems are based on several types of organization. First, amphiphilic lipids are able to create monolayer and bilayer structures which may be flat, vesicular or micellar. Into these structures membrane proteins can be inserted which use the membrane to provide signals for lateral and orientational organization. Furthermore, the proteins are the product of highly specific self-assembly otherwise known as folding, which mostly places individual atoms at precise places in three dimensions. These structures all have dimensions in the nanoscale, except for the size of membrane planes which may extend for millimetres in large liposomes or centimetres on planar surfaces such as monolayers at the air/water interface. Membrane systems can be assembled on to surfaces to create supported bilayers and these have uses in biosensors and in electrical measurements using modified ion channels. The supported systems also allow for measurements using spectroscopy, surface plasmon resonance and atomic force microscopy. By combining the roles of lipids and proteins, highly ordered and specific structures can be self-assembled in aqueous solution at the nanoscale.

Au nanorice assemble electrolytically into mesostars.

PubMed

Bardhan, Rizia; Neumann, Oara; Mirin, Nikolay; Wang, Hui; Halas, Naomi J

2009-02-24

Star-shaped mesotructures are formed when an aqueous suspension of Au nanorice particles, which consist of prolate hematite cores and a thin Au shell, is subjected to an electric current. The nanorice particles assemble to form hyperbranched micrometer-scale mesostars. To our knowledge, this is the first reported observation of nanoparticle assembly into larger ordered structures under the influence of an electrochemical process (H(2)O electrolysis). The assembly is accompanied by significant modifications in the morphology, dimensions, chemical composition, crystallographic structure, and optical properties of the constituent nanoparticles.

Self-regulation as a moderator of the relation between coping and symptomatology in children of divorce.

PubMed

Lengua, L J; Sandler, I N

1996-12-01

Investigated the effects of self-regulation as a moderator of the relations between coping efforts and psychological symptoms of children of divorce. The interactions of two dimensions of self-regulation (task orientation and approach-flexibility) and two dimensions of coping (active and avoidant) predicting children's postdivorce symptoms were tested using a sample of 199 divorced mothers and their children, ages 8 to 12. The approach-flexibility dimension moderated the relations of both active and avoidant coping with children's self-report of anxiety. At higher levels of approach-flexibility, active coping was negatively related to anxiety, while at lower levels of approach-flexibility, active coping was unrelated to anxiety. Avoidant coping was unrelated to anxiety at higher levels of approach-flexibility, whereas at lower levels of approach-flexibility, avoidant coping was positively related to anxiety. The task orientation dimension did not interact with coping, but had direct, independent effects on children's self-report of conduct problems, depression, and parent-report of internalizing and externalizing behavior problems. The implications for understanding children's coping with divorce and future directions for research are discussed.

NEUTRONIC REACTOR WITH ACCESSIBLE THIMBLE AND EMERGENCY COOLING FEATURES

DOEpatents

McCorkle, W.H.

1960-02-23

BS>A safety system for a water-moderated reactor is described. The invention comprises a reservoir system for spraying the fuel elements within a fuel assembly with coolant and keeping them in a continuous bath even if the coolant moderator is lost from the reactor vessel. A reservoir gravity feeds one or more nozzels positioned within each fuel assembly which continually forces water past the fuel elements.

CHF considerations for highly moderated 100% MOX fuels PWRs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saphier, D.; Raymond, P.

1995-09-01

A feasibility study on using 100% MOX fuel in a PWR with increased moderating ratio, RMA, was initiated. In the proposed design all the parameters were chosen identical to the French 1450MW PWR, except the fuel pin diameter which was reduced to achieve higher moderating ratios, V{sub M}/V{sub F}, where V{sub M} and V{sub F} are the moderator and fuel volume respectively. Moderating ratios from 2 to 4 were considered. In the present study the thermal-hydraulic feasibility of using fuel assemblies with smaller diameter fuel pins was investigated. The major design constrain in this study was the critical heat fluxmore » (CHF). In order to maintain the fuel pin integrity under nominal operating and transient conditions, the minimum DNBR, (Departure from Nucleate Boiling Ratio given by CHF/q{close_quotes}{sub local}, where q{close_quotes}{sub local} is the local heat flux), has to be above a given value. The limitations of the existing CHF correlations for the present study are outlined. Two designs based on the conventional 17x17 fuel assembly and on the advanced 19x19 assembly meeting the MDNBR criteria and satisfying the control margin requirements, are proposed.« less

Willing and able to fake emotions: a closer examination of the link between emotional dissonance and employee well-being.

PubMed

Pugh, S Douglas; Groth, Markus; Hennig-Thurau, Thorsten

2011-03-01

Emotional dissonance resulting from an employee's emotional labor is usually considered to lead to negative employee outcomes, such as job dissatisfaction and emotional exhaustion. Drawing on Festinger's (1957) cognitive dissonance theory, we argue that the relationship between service employees' surface acting and job dissatisfaction and emotional exhaustion is moderated by 2 aspects of a service worker's self-concept: the importance of displaying authentic emotions (reflecting the self-concept's self-liking dimension) and the employee's self-efficacy when faking emotions (reflecting the self-competence dimension). A survey of 528 frontline employees from a wide variety of service jobs provides support for the moderating role of both self-concept dimensions, which moderate 3 out of 4 relationships. Theoretical and practical implications are discussed from the perspectives of cognitive dissonance and emotional labor theories. PsycINFO Database Record (c) 2011 APA, all rights reserved.

Modeling the Direct and Indirect Determinants of Different Types of Individual Job Performance

DTIC Science & Technology

2008-06-01

cognitions , and self-regulation). A different model was found to describe the process depending on whether the performance dimension was an element of...performing the behaviors they indicated they intended to perform, and assembled a battery of existing instruments to measure cognitive ability, personality...model came from the task performance dimension. For this dimension, knowledge, skill, cognitive choice aspects of motivation, and self-regulation

Fabrication Procedures and Birefringence Measurements for Designing Magnetically Responsive Lanthanide Ion Chelating Phospholipid Assemblies.

PubMed

Isabettini, Stéphane; Baumgartner, Mirjam E; Fischer, Peter; Windhab, Erich J; Liebi, Marianne; Kuster, Simon

2018-01-03

Bicelles are tunable disk-like polymolecular assemblies formed from a large variety of lipid mixtures. Applications range from membrane protein structural studies by nuclear magnetic resonance (NMR) to nanotechnological developments including the formation of optically active and magnetically switchable gels. Such technologies require high control of the assembly size, magnetic response and thermal resistance. Mixtures of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and its lanthanide ion (Ln 3+ ) chelating phospholipid conjugate, 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA), assemble into highly magnetically responsive assemblies such as DMPC/DMPE-DTPA/Ln 3+ (molar ratio 4:1:1) bicelles. Introduction of cholesterol (Chol-OH) and steroid derivatives in the bilayer results in another set of assemblies offering unique physico-chemical properties. For a given lipid composition, the magnetic alignability is proportional to the bicelle size. The complexation of Ln 3+ results in unprecedented magnetic responses in terms of both magnitude and alignment direction. The thermo-reversible collapse of the disk-like structures into vesicles upon heating allows tailoring of the assemblies' dimensions by extrusion through membrane filters with defined pore sizes. The magnetically alignable bicelles are regenerated by cooling to 5 °C, resulting in assembly dimensions defined by the vesicle precursors. Herein, this fabrication procedure is explained and the magnetic alignability of the assemblies is quantified by birefringence measurements under a 5.5 T magnetic field. The birefringence signal, originating from the phospholipid bilayer, further enables monitoring of polymolecular changes occurring in the bilayer. This simple technique is complementary to NMR experiments that are commonly employed to characterize bicelles.

Hand-Held Electronic Gap-Measuring Tools

NASA Technical Reports Server (NTRS)

Sugg, F. E.; Thompson, F. W.; Aragon, L. A.; Harrington, D. B.

1985-01-01

Repetitive measurements simplified by tool based on LVDT operation. With fingers in open position, Gap-measuring tool rests on digital readout instrument. With fingers inserted in gap, separation alters inductance of linear variable-differential transformer in plastic handle. Originally developed for measuring gaps between surface tiles of Space Shuttle orbiter, tool reduces measurement time from 20 minutes per tile to 2 minutes. Also reduces possibility of damage to tiles during measurement. Tool has potential applications in mass production; helps ensure proper gap dimensions in assembly of refrigerator and car doors and also used to measure dimensions of components and to verify positional accuracy of components during progressive assembly operations.

Large three-dimensional photonic crystals based on monocrystalline liquid crystal blue phases.

PubMed

Chen, Chun-Wei; Hou, Chien-Tsung; Li, Cheng-Chang; Jau, Hung-Chang; Wang, Chun-Ta; Hong, Ching-Lang; Guo, Duan-Yi; Wang, Cheng-Yu; Chiang, Sheng-Ping; Bunning, Timothy J; Khoo, Iam-Choon; Lin, Tsung-Hsien

2017-09-28

Although there have been intense efforts to fabricate large three-dimensional photonic crystals in order to realize their full potential, the technologies developed so far are still beset with various material processing and cost issues. Conventional top-down fabrications are costly and time-consuming, whereas natural self-assembly and bottom-up fabrications often result in high defect density and limited dimensions. Here we report the fabrication of extraordinarily large monocrystalline photonic crystals by controlling the self-assembly processes which occur in unique phases of liquid crystals that exhibit three-dimensional photonic-crystalline properties called liquid-crystal blue phases. In particular, we have developed a gradient-temperature technique that enables three-dimensional photonic crystals to grow to lateral dimensions of ~1 cm (~30,000 of unit cells) and thickness of ~100 μm (~ 300 unit cells). These giant single crystals exhibit extraordinarily sharp photonic bandgaps with high reflectivity, long-range periodicity in all dimensions and well-defined lattice orientation.Conventional fabrication approaches for large-size three-dimensional photonic crystals are problematic. By properly controlling the self-assembly processes, the authors report the fabrication of monocrystalline blue phase liquid crystals that exhibit three-dimensional photonic-crystalline properties.

Burnable absorber arrangement for fuel bundle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crowther, R.L.; Townsend, D.B.

1986-12-16

This patent describes a boiling water reactor core whose operation is characterized by a substantial proportion of steam voids with concomitantly reduced moderation toward the top of the core when the reactor is in its hot operating condition. The reduced moderation leads to slower burnup and greater conversion ratio in an upper core region so that when the reactor is in its cold shut down condition the resulting relatively increased moderation in the upper core region is accompanied by a reactivity profile that peaks in the upper core region. A fuel assembly is described comprising; a component of fissile materialmore » distributed over a substantial axial extent of the fuel assembly; and a component of neutron absorbing material having an axial distribution characterized by an enhancement in an axial zone of the fuel assembly, designated the cold shutdown control zone, corresponding to at least a portion of the axial region of the core when the cold shutdown reactivity peaks. The aggregate amount of neutron absorbing material in the cold shutdown zone of the fuel assembly is greater than the aggregate amount of neutron absorbing material in the axial zones of the fuel assembly immediately above and immediately below the cold shutdown control zone whereby the cold shutdown reactivity peak is reduced relative to the cold shutdown reactivity in the zones immediately above and immediately below the cold shutdown control zone. The cold shutdown zone has an axial extent measured from the bottom of the fuel assembly in the range between 68-88 percent of the height of the fissile material in the fuel assembly.« less

Gender as a Moderator of the Relation Between Age Cohort and Three-Dimensional Wisdom in Iranian Culture.

PubMed

Cheraghi, Fereshte; Kadivar, Parvin; Ardelt, Monika; Asgari, Ali; Farzad, Valiollah

2015-07-01

This study examined whether gender moderated the association between age cohort and the cognitive, reflective, and compassionate dimensions of wisdom, using an Iranian sample of 439 adults from three age cohorts: young (18-34), middle-aged (35-54), and older (55 and above). Results indicated that the interaction effect between gender and age cohort was significant for three-dimensional wisdom and all three wisdom dimensions. Compared with younger women and older men, older women tended to have less education and to score lower on the cognitive wisdom dimension, but they had similar average scores as older men on the compassionate wisdom dimension. Overall, the association between age and wisdom was only positive for men, due mainly to the positive relation between age and the reflective and compassionate wisdom dimensions for men after adjusting for education. The results are interpreted with reference to generation gaps, socialization of men versus women, and life experiences and opportunities. © The Author(s) 2015.

Tailored hierarchical micelle architectures using living crystallization-driven self-assembly in two dimensions

NASA Astrophysics Data System (ADS)

Hudson, Zachary M.; Boott, Charlotte E.; Robinson, Matthew E.; Rupar, Paul A.; Winnik, Mitchell A.; Manners, Ian

2014-10-01

Recent advances in the self-assembly of block copolymers have enabled the precise fabrication of hierarchical nanostructures using low-cost solution-phase protocols. However, the preparation of well-defined and complex planar nanostructures in which the size is controlled in two dimensions (2D) has remained a challenge. Using a series of platelet-forming block copolymers, we have demonstrated through quantitative experiments that the living crystallization-driven self-assembly (CDSA) approach can be extended to growth in 2D. We used 2D CDSA to prepare uniform lenticular platelet micelles of controlled size and to construct precisely concentric lenticular micelles composed of spatially distinct functional regions, as well as complex structures analogous to nanoscale single- and double-headed arrows and spears. These methods represent a route to hierarchical nanostructures that can be tailored in 2D, with potential applications as diverse as liquid crystals, diagnostic technology and composite reinforcement.

Boron-coated straws as a replacement for 3He-based neutron detectors

NASA Astrophysics Data System (ADS)

Lacy, Jeffrey L.; Athanasiades, Athanasios; Sun, Liang; Martin, Christopher S.; Lyons, Tom D.; Foss, Michael A.; Haygood, Hal B.

2011-10-01

US and international government efforts to equip major seaports with large area neutron detectors, aimed to intercept the smuggling of nuclear materials, have precipitated a critical shortage of 3He gas. It is estimated that the annual demand of 3He for US security applications alone is more than the worldwide supply. This is strongly limiting the prospects of neutron science, safeguards, and other applications that rely heavily on 3He-based detectors. Clearly, alternate neutron detection technologies that can support large sensitive areas, and have low gamma sensitivity and low cost must be developed. We propose a low-cost technology based on long copper tubes (straws), coated on the inside with a thin layer of 10B-enriched boron carbide ( 10B 4C). In addition to the high abundance of boron on Earth and low cost of 10B enrichment, the boron-coated straw (BCS) detector offers distinct advantages over conventional 3He-based detectors, and alternate technologies such as 10BF 3 tubes and 10B-coated rigid tubes. These include better distribution inside moderator assemblies, many-times faster electronic signals, no pressurization, improved gamma-ray rejection, no toxic or flammable gases, and ease of serviceability. We present the performance of BCS detectors dispersed in a solid plastic moderator to address the need for portal monitoring. The design adopts the outer dimensions of currently deployed 3He-based monitors, but takes advantage of the small BCS diameter to achieve a more uniform distribution of neutron converter throughout the moderating material. We show that approximately 63 BCS detectors, each 205 cm long, distributed inside the moderator, can match or exceed the detection efficiency of typical monitors fitted with a 5 cm diameter 3He tube, 187 cm long, pressurized to 3 atm.

Resilience as a Moderator of Psychological Health in Situations of Chronic Stress (Burnout) in a Sample of Hospital Nurses.

PubMed

García-Izquierdo, Mariano; Meseguer de Pedro, Mariano; Ríos-Risquez, Mª Isabel; Sánchez, Mª Isabel Soler

2018-03-01

To analyze the role played by resilience in the dimensions that constitute burnout syndrome and, through that, the psychological health of a sample of nurses working at hospital centers. Cross-sectional design, with a questionnaire as the tool. The sample consisted of 537 nurses from three public hospitals in Murcia, Spain. The questionnaire contained measures of the following variables: resilience, the three dimensions of burnout (emotional exhaustion, cynicism, and professional efficacy), and general psychological health, as well as sociodemographic and employment information. The emotional exhaustion and cynicism dimensions of burnout were significantly linked to psychological health in the manner expected, but this was not the case for professional efficacy. A stepwise multiple regression analysis revealed the moderating role of resilience on the emotional exhaustion and cynicism dimensions, as well as on psychological health. This study highlights the moderating role of resilience on burnout and psychological health. The practical implications of the results are discussed for the implementation of measures to increase resilience as a personal resource in order to improve the health and work performance of these professionals. © 2017 Sigma Theta Tau International.

Unusually large unit cell of lipid bicontinuous cubic phase: towards nature's length scales

NASA Astrophysics Data System (ADS)

Kim, Hojun; Leal, Cecilia

Lipid bicontinuous cubic phases are of great interest for drug delivery, protein crystallization, biosensing, and templates for directing hard material assembly. Structural modulations of lipid mesophases regarding phase identity and unit cell size are often necessary to augment loading and gain pore size control. One important example is the need for unit cells large enough to guide the crystallization of bigger proteins without distortion of the templating phase. In nature, bicontinuous cubic constructs achieve unit cell dimensions as high as 300 nm. However, the largest unit cell of lipid mesophases synthesized in the lab is an order of magnitude lower. In fact, it has been predicted theoretically that lipid bicontinuous cubic phases of unit cell dimensions exceeding 30 nm could not exist, as high membrane fluctuations would damp liquid crystalline order. Here we report non-equilibrium assembly methods of synthesizing metastable bicontinuous cubic phases with unit cell dimensions as high as 70 nm. The phases are stable for very long periods and become increasingly ordered as time goes by without changes to unit cell dimensions. We acknowledge the funding source as a NIH.

75 FR 36577 - Airworthiness Directives; McDonnell Douglas Corporation Model MD-90-30 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-28

... pump wire harness assembly is routed within the tire burst area and that installing and routing a new and longer auxiliary hydraulic pump wire harness assembly outside the tire burst area will minimize... general visual inspection of the wire harness protective sleeving dimensions, which are related...

Dexterity and Bench Assembly Work Productivity in Adults with Mild Mental Retardation.

ERIC Educational Resources Information Center

Serr, Russell; And Others

1994-01-01

This study compared dexterity scores using the Vocational Transit Test System and bench assembly work productivity in 30 adults with mild mental retardation. Moderately high correlations were found between work output and motor coordination, manual dexterity, finger dexterity (with and without assembly), and total dexterity score. Finger dexterity…

Effects of Picture Referencing on PVC Chair, Love Seat, and Settee Assemblies by Students with Mental Retardation.

ERIC Educational Resources Information Center

Martin, James E.; And Others

1992-01-01

This study examined the effects of two indirect corrective feedback procedures (picture and video referencing involving instructor prompting) on the assembly skills of five secondary students with moderate mental retardation. Picture and video referencing conditions were more effective than assembly photographs, sequenced pictures, sequenced…

Psychopathic Traits Moderate Peer Influence on Adolescent Delinquency

ERIC Educational Resources Information Center

Kerr, Margaret; Van Zalk, Maarten; Stattin, Hakan

2012-01-01

Background: Peer influence on adolescent delinquency is well established, but little is known about moderators of peer influence. In this study, we examined adolescents' (targets) and their peers' psychopathic personality traits as moderators of peer influence on delinquency in peer networks. We used three separate dimensions of the psychopathic…

Horizontal and vertical dimensions of individualism-collectivism: a comparison of African Americans and European Americans.

PubMed

Komarraju, Meera; Cokley, Kevin O

2008-10-01

The current study examined ethnic differences in horizontal and vertical dimensions of individualism and collectivism among 96 African American and 149 European American college students. Participants completed the 32-item Singelis et al. (1995) Individualism/Collectivism Scale. Multivariate analyses of variance results yielded a main effect for ethnicity, with African Americans being significantly higher on horizontal individualism and European Americans being higher on horizontal collectivism and vertical individualism. A moderated multiple regression analysis indicated that ethnicity significantly moderated the relationship between individualism and collectivism. Individualism and collectivism were significantly and positively associated among African Americans, but not associated among European Americans. In addition, collectivism was related to grade point average for African Americans but not for European Americans. Contrary to the prevailing view of individualism-collectivism being unipolar, orthogonal dimensions, results provide support for individualism-collectivism to be considered as unipolar, related dimensions for African Americans.

Locus of control as a stress moderator and mediator in children of divorce.

PubMed

Kim, L S; Sandler, I N; Tein, J Y

1997-04-01

This paper examined the stress moderator and mediator effects of four dimensions of perceived control in children of divorce. The dimensions of locus of control included internal control for positive events, internal control for negative events, unknown control for positive events, and unknown control for negative events. The sample consisted of 222 children between the ages of 8 and 12 whose parents had divorced in the previous 2 years. Moderational analyses showed that unknown control for positive events interacted with negative events to predict total symptoms. Plots of the simple slopes indicated a stress buffering effect whereby the slope of negative events on symptoms was higher for high than for low levels of unknown control for positive events. Mediational analysis showed that the relations between negative events and symptoms were mediated by both unknown control for positive events and unknown control for negative events. In contrast, evidence was not found for either a stress mediational or a moderational model for perceived internal control for positive or negative events. These results suggest that unknown control beliefs may be a particularly important dimension of control for children of divorce.

The impact of transaction trust on consumers' intentions to adopt m-commerce: a cross-cultural investigation.

PubMed

Kao, Danny Tengti

2009-04-01

Mobile commerce (M-commerce) has been acknowledged as one of the most representative transaction types driving e-commerce worldwide; however, the potential security threats that keep consumers from M-commerce still confound the M-commerce industry. This research attempts to explore two questions: What are the dimensions of transaction trust that may significantly affect consumers' intentions to adopt M-commerce, and what are the cultural dimensions that may significantly moderate the impact of transaction trust on consumers' intentions to adopt M-commerce? A research framework based on the BATE model and Hofstede's cultural dimensions was established to identify how transaction trust and cultural value affect consumers' intentions to adopt M-commerce. Results revealed that transaction trust significantly affects consumers' intentions to adopt M-commerce. However, while uncertainty avoidance moderates the impacts of business trust and security on consumers' intentions of M-commerce adoption, both individualism/collectivism and long-term/short-term orientation moderate the relationship between security trust and consumers' intentions of M-commerce adoption.

Cluster analysis reveals subclinical subgroups with shared autistic and schizotypal traits.

PubMed

Ford, Talitha C; Apputhurai, Pragalathan; Meyer, Denny; Crewther, David P

2018-07-01

Autism and schizophrenia spectrum research is typically based on coarse diagnostic classification, which overlooks individual variation within clinical groups. This method limits the identification of underlying cognitive, genetic and neural correlates of specific symptom dimensions. This study, therefore, aimed to identify homogenous subclinical subgroups of specific autistic and schizotypal traits dimensions, that may be utilised to establish more effective diagnostic and treatment practices. Latent profile analysis of subscale scores derived from an autism-schizotypy questionnaire, completed by 1678 subclinical adults aged 18-40 years (1250 females), identified a local optimum of eight population clusters: High, Moderate and Low Psychosocial Difficulties; High, Moderate and Low Autism-Schizotypy; High Psychosis-Proneness; and Moderate Schizotypy. These subgroups represent the convergent and discriminant dimensions of autism and schizotypy in the subclinical population, and highlight the importance of examining subgroups of specific symptom characteristics across these spectra in order to identify the underlying genetic and neural correlates that can be utilised to advance diagnostic and treatment practices. Copyright © 2018 Elsevier B.V. All rights reserved.

Reactor hold-down arrangement

DOEpatents

McCugh, Ralph

1976-05-25

A nuclear reactor contains an assembly of moderator blocks, laid end-to-end, one on top of another, and alongside one another, which blocks are restrained by vertical beams at each side of the assembly, fixed horizontal beams surrounding the assembly at the top and bottom and springs connecting the fixed horizontal beams and the ends of the vertical beams in such a way as to permit relatively high expansion midway of the height of the assembly while restricting expansion near the top of the assembly.

Linking product design to consumer behavior: the moderating role of consumption experience.

PubMed

Gilal, Naeem Gul; Zhang, Jing; Gilal, Faheem Gul

2018-01-01

Previous investigations of product design broadly link aesthetic, functional, and symbolic designs to sales growth, high turnover, and market share. However, the effect of product design dimensions on consumer willingness-to-buy (WTB) and word-of-mouth (WOM) is virtually ignored by consumer researchers. Similarly, whether the consumption experience can differentiate the effect of the three product design dimensions on WTB and WOM is completely unknown. Using categorization theory as a lens, our study aims to explore the effect of product design dimensions on consumer WTB and WOM directly and indirectly through the moderation of the consumption experience. A convenience sample of (n=357) Chinese and (n=277) Korean shoppers was utilized to test the hypotheses in the fashion apparel industry. Our results showed that the aesthetic design was more prominent in capturing consumer WTB for both Chinese and Koreans. Similarly, the aesthetic design was more salient in enhancing WOM for Chinese, whereas the symbolic design was more promising in terms of improving WOM for Koreans. Further, our moderation results demonstrated that the consumption experience could differentiate the effects of the three product design dimensions on consumer WTB and WOM for Chinese. By contrast, the consumption experience could only interact with the aesthetic design to improve WOM for South Koreans. To the best of authors' knowledge, the present study is one of the initial attempts to link three product design dimensions with consumer WTB and WOM in the fashion apparel context and explored whether consumption experience competes or complement with three product design dimensions to shape consumer WTB and WOM for Chinese and Koreans.

Neutron-beam-shaping assembly for boron neutron-capture therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zaidi, L.; Kashaeva, E. A.; Lezhnin, S. I.

A neutron-beam-shaping assembly consisting of a moderator, a reflector, and an absorber is used to form a therapeutic neutron beam for the boron neutron-capture therapy of malignant tumors at accelerator neutron sources. A new structure of the moderator and reflector is proposed in the present article, and the results of a numerical simulation of the neutron spectrum and of the absorbed dose in a modified Snyder head phantom are presented. The application of a composite moderator and of a composite reflector and the implementation of neutron production at the proton energy of 2.3MeV are shown to permit obtaining a high-qualitymore » therapeutic neutron beam.« less

Organizational readiness for knowledge translation in chronic care: a Delphi study.

PubMed

Attieh, Randa; Gagnon, Marie-Pierre; Estabrooks, Carole A; Légaré, France; Ouimet, Mathieu; Vazquez, Patricia; Nuño, Roberto

2014-11-08

Health-care organizations need to be ready prior to implement evidence-based interventions. In this study, we sought to achieve consensus on a framework to assess the readiness of health-care organizations to implement evidence-based interventions in the context of chronic care. We conducted a web-based modified Delphi study between March and May 2013. We contacted 76 potentially eligible international experts working in the fields of organizational readiness (OR), knowledge translation (KT), and chronic care to comment upon the 76 elements resulting from our proposed conceptual map. This conceptual map was based on a systematic review of the existing frameworks of Organizational Readiness for Change (ORC) in health-care. We developed a conceptual map that proposed a set of core concepts and their associated 17 dimensions and 59 sub-dimensions. Experts rated their agreement concerning the applicability and importance of ORC elements on a 5-point Likert scale, where 1 indicates total disagreement and 5 indicates total agreement. Two rounds were needed to get a consensus from the experts. Consensus was a priori defined as strong (≥75%) or moderate (60-74%). Simple descriptive statistics was used. In total, 14 participants completed the first round and 10 completed the two rounds. Panel members reached consensus on the applicability and importance of 6 out of 17 dimensions and 28 out of 59 sub-dimensions to assess OR for KT in the context of chronic care. A strong level of consensus (≥75%) was attained on the Organizational contextual factors, Leadership/participation, Organizational support, and Motivation dimensions. The Organizational climate for change and Change content dimensions reached a moderate consensus (60-74%). Experts also reached consensus on 28 out of 59 sub-dimensions to assess OR for KT. Twenty-one sub-dimensions reached a strong consensus (≥75%) and seven a moderate consensus (60-74%). This study results provided the most important and applicable dimensions and sub-dimensions for assessing OR-KT in the context of chronic care. They can be used to guide the design of an assessment tool to improve knowledge translation in the field of chronic care.

Directed Self-Assembly of Star-Block Copolymers by Topographic Nanopatterns through Nucleation and Growth Mechanism.

PubMed

Krishnan, Mohan Raj; Lu, Kai-Yuan; Chiu, Wen-Yu; Chen, I-Chen; Lin, Jheng-Wei; Lo, Ting-Ya; Georgopanos, Prokopios; Avgeropoulos, Apostolos; Lee, Ming-Chang; Ho, Rong-Ming

2018-04-01

Exploring the ordering mechanism and dynamics of self-assembled block copolymer (BCP) thin films under confined conditions are highly essential in the application of BCP lithography. In this study, it is aimed to examine the self-assembling mechanism and kinetics of silicon-containing 3-arm star-block copolymer composed of polystyrene (PS) and poly(dimethylsiloxane) blocks as nanostructured thin films with perpendicular cylinders and controlled lateral ordering by directed self-assembly using topographically patterned substrates. The ordering process of the star-block copolymer within fabricated topographic patterns with PS-functionalized sidewall can be carried out through the type of secondary (i.e., heterogeneous) nucleation for microphase separation initiated from the edge and/or corner of the topographic patterns, and directed to grow as well-ordered hexagonally packed perpendicular cylinders. The growth rate for the confined microphase separation is highly dependent upon the dimension and also the geometric texture of the preformed pattern. Fast self-assembly for ordering of BCP thin film can be achieved by lowering the confinement dimension and also increasing the concern number of the preformed pattern, providing a new strategy for the design of BCP lithography from the integration of top-down and bottom-up approaches. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Computed Tomography Measuring Inside Machines

NASA Technical Reports Server (NTRS)

Wozniak, James F.; Scudder, Henry J.; Anders, Jeffrey E.

1995-01-01

Computed tomography applied to obtain approximate measurements of radial distances from centerline of turbopump to leading edges of diffuser vanes in turbopump. Use of computed tomography has significance beyond turbopump application: example of general concept of measuring internal dimensions of assembly of parts without having to perform time-consuming task of taking assembly apart and measuring internal parts on coordinate-measuring machine.

The AXAF technology mirror assembly program - An overview

NASA Technical Reports Server (NTRS)

Wyman, Charles L.; Dailey, Carroll C.; Reily, Cary; Weisskopf, Martin; Mckinnon, Phil

1986-01-01

The manufacture and testing of the Technology Mirror Assembly (TMA), a prototype Wolter I telescope scaled to the dimensions of the innermost element of the High-Resolution Mirror Assembly for the NASA Advanced X-ray Astrophysics Facility (AXAF), are reviewed. Consideration is given to the grinding, polishing, coating, and assembly of the zerodur TMA blanks, the TMA mount design, and the test procedures used at the MSFC X-ray Calibration Facility. Test results indicate FWHM resolution less than 0.5 arcsec, but with significant near-field scattering attributed to ripple; further long-lap polishing is suggested.

Robotic Assembly of Truss Structures for Space Systems and Future Research Plans

NASA Technical Reports Server (NTRS)

Doggett, William

2002-01-01

Many initiatives under study by both the space science and earth science communities require large space systems, i.e. with apertures greater than 15 m or dimensions greater than 20 m. This paper reviews the effort in NASA Langley Research Center's Automated Structural Assembly Laboratory which laid the foundations for robotic construction of these systems. In the Automated Structural Assembly Laboratory reliable autonomous assembly and disassembly of an 8 meter planar structure composed of 102 truss elements covered by 12 panels was demonstrated. The paper reviews the hardware and software design philosophy which led to reliable operation during weeks of near continuous testing. Special attention is given to highlight the features enhancing assembly reliability.

Disentangling the roles of safety climate and safety culture: Multi-level effects on the relationship between supervisor enforcement and safety compliance.

PubMed

Petitta, Laura; Probst, Tahira M; Barbaranelli, Claudio; Ghezzi, Valerio

2017-02-01

Despite increasing attention to contextual effects on the relationship between supervisor enforcement and employee safety compliance, no study has yet explored the conjoint influence exerted simultaneously by organizational safety climate and safety culture. The present study seeks to address this literature shortcoming. We first begin by briefly discussing the theoretical distinctions between safety climate and culture and the rationale for examining these together. Next, using survey data collected from 1342 employees in 32 Italian organizations, we found that employee-level supervisor enforcement, organizational-level safety climate, and autocratic, bureaucratic, and technocratic safety culture dimensions all predicted individual-level safety compliance behaviors. However, the cross-level moderating effect of safety climate was bounded by certain safety culture dimensions, such that safety climate moderated the supervisor enforcement-compliance relationship only under the clan-patronage culture dimension. Additionally, the autocratic and bureaucratic culture dimensions attenuated the relationship between supervisor enforcement and compliance. Finally, when testing the effects of technocratic safety culture and cooperative safety culture, neither safety culture nor climate moderated the relationship between supervisor enforcement and safety compliance. The results suggest a complex relationship between organizational safety culture and safety climate, indicating that organizations with particular safety cultures may be more likely to develop more (or less) positive safety climates. Moreover, employee safety compliance is a function of supervisor safety leadership, as well as the safety climate and safety culture dimensions prevalent within the organization. Copyright © 2016 Elsevier Ltd. All rights reserved.

Nonionic amphiphile nanoarchitectonics: self-assembly into micelles and lyotropic liquid crystals

NASA Astrophysics Data System (ADS)

Shrestha, Lok Kumar; Strzelczyk, Karolina Maria; Goswami Shrestha, Rekha; Ichikawa, Kotoko; Aramaki, Kenji; Hill, Jonathan P.; Ariga, Katsuhiko

2015-05-01

Amphiphiles, molecules that possess both hydrophilic and hydrophobic moieties, are architecturally simple molecules that can spontaneously self-assemble into complex hierarchical structures from lower to higher dimensions either in the bulk phase or at an interface. Recent developments in multifunctional nanostructure design using the advanced concept of nanoarchitectonics utilize this simple process of assembly. Amphiphilic self-assemblies involving lipids or proteins mimic the structure of biological systems, thus highlighting the necessity of a fundamental physical understanding of amphiphilic self-assembly towards a realization of the complex mechanisms operating in nature. Herein, we describe self-assembled microstructures of biocompatible and biodegradable tetraglycerol lauryl ether (C12G4) nonionic surfactant in an aqueous solvent system. Temperature-composition analyses of equilibrium phases identified by using small-angle x-ray scattering (SAXS) provide strong evidence of various spontaneously self-assembled mesostructures, such as normal micelles (Wm), hexagonal liquid crystal (H1), and reverse micelles (Om). In contrast to conventional poly(oxyethylene) nonionic surfactants, C12G4 did not exhibit the clouding phenomenon at higher temperatures (phase separation was not observed up to 100 °C), demonstrating the greater thermal stability of the self-assembled mesophases. Generalized indirect Fourier transformation (GIFT) evaluation of the SAXS data confirmed the formation of core-shell-type spherical micelles with a maximum dimension ca. 8.7 nm. The shape and size of the C12G4 micelles remained apparently unchanged over a wide range of concentrations (up to 20%), but intermicellar interactions increased and could be described by the Percus-Yevick (PY) theory (after Carnahan and Starling), which provides a very accurate analytical expression for the osmotic pressure of a monodisperse hard sphere.

Molecular Precision at Micrometer Length Scales: Hierarchical Assembly of DNA-Protein Nanostructures.

PubMed

Schiffels, Daniel; Szalai, Veronika A; Liddle, J Alexander

2017-07-25

Robust self-assembly across length scales is a ubiquitous feature of biological systems but remains challenging for synthetic structures. Taking a cue from biology-where disparate molecules work together to produce large, functional assemblies-we demonstrate how to engineer microscale structures with nanoscale features: Our self-assembly approach begins by using DNA polymerase to controllably create double-stranded DNA (dsDNA) sections on a single-stranded template. The single-stranded DNA (ssDNA) sections are then folded into a mechanically flexible skeleton by the origami method. This process simultaneously shapes the structure at the nanoscale and directs the large-scale geometry. The DNA skeleton guides the assembly of RecA protein filaments, which provides rigidity at the micrometer scale. We use our modular design strategy to assemble tetrahedral, rectangular, and linear shapes of defined dimensions. This method enables the robust construction of complex assemblies, greatly extending the range of DNA-based self-assembly methods.

The Trajectories of Adolescents’ Perceptions of School Climate, Deviant Peer Affiliation, and Behavioral Problems During the Middle School Years

PubMed Central

Wang, Ming-Te; Dishion, Thomas J.

2012-01-01

This longitudinal study examined trajectories of change in adolescents’ perceptions of four dimensions of school climate (academic support, behavior management, teacher social support, peer social support) and the effects of such trajectories on adolescent problem behaviors. We also tested whether school climate moderated the associations between deviant peer affiliation and adolescent problem behaviors. The 1,030 participating adolescents from 8 schools were followed from 6th through 8th grades (54% female; 76% European American). Findings indicated that all the dimensions of school climate declined and behavioral problems and deviant peer affiliation increased. Declines in each of the dimensions were associated with increases in behavioral problems. The prediction of problem behavior from peer affiliation was moderated by adolescents’ perceptions of school climate. PMID:22822296

Dimension-controlled assemblies of anion-responsive π-electronic systems bearing aryl substituents with fan-shaped geometries.

PubMed

Lakshmi, Vellanki; Haketa, Yohei; Yamakado, Ryohei; Yasuda, Nobuhiro; Maeda, Hiromitsu

2017-03-30

Pyrrole-4-aryl-substituted dipyrrolyldiketone BF 2 complexes as anion-responsive π-electronic molecules were synthesized via a 3,5-dimethylpyrrole precursor. Mesophases were observed in derivatives that possessed long alkyl chains on the pyrrole-4-aryl groups along with their anion complexes as ion-pairing assemblies in combination with appropriate cations.

Linking product design to consumer behavior: the moderating role of consumption experience

PubMed Central

Gilal, Naeem Gul; Zhang, Jing; Gilal, Faheem Gul

2018-01-01

Background Previous investigations of product design broadly link aesthetic, functional, and symbolic designs to sales growth, high turnover, and market share. However, the effect of product design dimensions on consumer willingness-to-buy (WTB) and word-of-mouth (WOM) is virtually ignored by consumer researchers. Similarly, whether the consumption experience can differentiate the effect of the three product design dimensions on WTB and WOM is completely unknown. Using categorization theory as a lens, our study aims to explore the effect of product design dimensions on consumer WTB and WOM directly and indirectly through the moderation of the consumption experience. Methods A convenience sample of (n=357) Chinese and (n=277) Korean shoppers was utilized to test the hypotheses in the fashion apparel industry. Results Our results showed that the aesthetic design was more prominent in capturing consumer WTB for both Chinese and Koreans. Similarly, the aesthetic design was more salient in enhancing WOM for Chinese, whereas the symbolic design was more promising in terms of improving WOM for Koreans. Further, our moderation results demonstrated that the consumption experience could differentiate the effects of the three product design dimensions on consumer WTB and WOM for Chinese. By contrast, the consumption experience could only interact with the aesthetic design to improve WOM for South Koreans. Conclusion To the best of authors’ knowledge, the present study is one of the initial attempts to link three product design dimensions with consumer WTB and WOM in the fashion apparel context and explored whether consumption experience competes or complement with three product design dimensions to shape consumer WTB and WOM for Chinese and Koreans. PMID:29785145

Clinical phenotypes of perinatal depression and time of symptom onset: analysis of data from an international consortium.

PubMed

Putnam, Karen T; Wilcox, Marsha; Robertson-Blackmore, Emma; Sharkey, Katherine; Bergink, Veerle; Munk-Olsen, Trine; Deligiannidis, Kristina M; Payne, Jennifer; Altemus, Margaret; Newport, Jeffrey; Apter, Gisele; Devouche, Emmanuel; Viktorin, Alexander; Magnusson, Patrik; Penninx, Brenda; Buist, Anne; Bilszta, Justin; O'Hara, Michael; Stuart, Scott; Brock, Rebecca; Roza, Sabine; Tiemeier, Henning; Guille, Constance; Epperson, C Neill; Kim, Deborah; Schmidt, Peter; Martinez, Pedro; Di Florio, Arianna; Wisner, Katherine L; Stowe, Zachary; Jones, Ian; Sullivan, Patrick F; Rubinow, David; Wildenhaus, Kevin; Meltzer-Brody, Samantha

2017-06-01

The perinatal period is a time of high risk for onset of depressive disorders and is associated with substantial morbidity and mortality, including maternal suicide. Perinatal depression comprises a heterogeneous group of clinical subtypes, and further refinement is needed to improve treatment outcomes. We sought to empirically identify and describe clinically relevant phenotypic subtypes of perinatal depression, and further characterise subtypes by time of symptom onset within pregnancy and three post-partum periods. Data were assembled from a subset of seven of 19 international sites in the Postpartum Depression: Action Towards Causes and Treatment (PACT) Consortium. In this analysis, the cohort was restricted to women aged 19-40 years with information about onset of depressive symptoms in the perinatal period and complete prospective data for the ten-item Edinburgh postnatal depression scale (EPDS). Principal components and common factor analysis were used to identify symptom dimensions in the EPDS. The National Institute of Mental Health research domain criteria functional constructs of negative valence and arousal were applied to the EPDS dimensions that reflect states of depressed mood, anhedonia, and anxiety. We used k-means clustering to identify subtypes of women sharing symptom patterns. Univariate and bivariate statistics were used to describe the subtypes. Data for 663 women were included in these analyses. We found evidence for three underlying dimensions measured by the EPDS: depressed mood, anxiety, and anhedonia. On the basis of these dimensions, we identified five distinct subtypes of perinatal depression: severe anxious depression, moderate anxious depression, anxious anhedonia, pure anhedonia, and resolved depression. These subtypes have clear differences in symptom quality and time of onset. Anxiety and anhedonia emerged as prominent symptom dimensions with post-partum onset and were notably severe. Our findings show that there might be different types and severity of perinatal depression with varying time of onset throughout pregnancy and post partum. These findings support the need for tailored treatments that improve outcomes for women with perinatal depression. Janssen Research & Development. Copyright © 2017 Elsevier Ltd. All rights reserved.

Clinical phenotypes of perinatal depression and time of symptom onset: analysis of data from an international consortium

PubMed Central

Putnam, Karen T; Wilcox, Marsha; Robertson-Blackmore, Emma; Sharkey, Katherine; Bergink, Veerle; Munk-Olsen, Trine; Deligiannidis, Kristina M; Payne, Jennifer; Altemus, Margaret; Newport, Jeffrey; Apter, Gisele; Devouche, Emmanuel; Viktorin, Alexander; Magnusson, Patrik; Penninx, Brenda; Buist, Anne; Bilszta, Justin; O’Hara, Michael; Stuart, Scott; Brock, Rebecca; Roza, Sabine; Tiemeier, Henning; Guille, Constance; Epperson, C Neill; Kim, Deborah; Schmidt, Peter; Martinez, Pedro; Di Florio, Arianna; Wisner, Katherine L; Stowe, Zachary; Jones, Ian; Sullivan, Patrick F; Rubinow, David; Wildenhaus, Kevin; Meltzer-Brody, Samantha

2018-01-01

Summary Background The perinatal period is a time of high risk for onset of depressive disorders and is associated with substantial morbidity and mortality, including maternal suicide. Perinatal depression comprises a heterogeneous group of clinical subtypes, and further refinement is needed to improve treatment outcomes. We sought to empirically identify and describe clinically relevant phenotypic subtypes of perinatal depression, and further characterise subtypes by time of symptom onset within pregnancy and three post-partum periods. Methods Data were assembled from a subset of seven of 19 international sites in the Postpartum Depression: Action Towards Causes and Treatment (PACT) Consortium. In this analysis, the cohort was restricted to women aged 19–40 years with information about onset of depressive symptoms in the perinatal period and complete prospective data for the ten-item Edinburgh postnatal depression scale (EPDS). Principal components and common factor analysis were used to identify symptom dimensions in the EPDS. The National Institute of Mental Health research domain criteria functional constructs of negative valence and arousal were applied to the EPDS dimensions that reflect states of depressed mood, anhedonia, and anxiety. We used k-means clustering to identify subtypes of women sharing symptom patterns. Univariate and bivariate statistics were used to describe the subtypes. Findings Data for 663 women were included in these analyses. We found evidence for three underlying dimensions measured by the EPDS: depressed mood, anxiety, and anhedonia. On the basis of these dimensions, we identified five distinct subtypes of perinatal depression: severe anxious depression, moderate anxious depression, anxious anhedonia, pure anhedonia, and resolved depression. These subtypes have clear differences in symptom quality and time of onset. Anxiety and anhedonia emerged as prominent symptom dimensions with post-partum onset and were notably severe. Interpretation Our findings show that there might be different types and severity of perinatal depression with varying time of onset throughout pregnancy and post partum. These findings support the need for tailored treatments that improve outcomes for women with perinatal depression. Funding Janssen Research & Development. PMID:28476427

Association between types of involvement in school bullying and different dimensions of anxiety symptoms and the moderating effects of age and gender in Taiwanese adolescents.

PubMed

Yen, Cheng-Fang; Huang, Mei-Feng; Kim, Young Shin; Wang, Peng-Wei; Tang, Tze-Chun; Yeh, Yi-Chun; Lin, Huang-Chi; Liu, Tai-Ling; Wu, Yu-Yu; Yang, Pinchen

2013-04-01

The aims of this cross-sectional study were to examine the associations of various types of school bullying involvement experiences with different dimensions of anxiety symptoms on the Multidimensional Anxiety Scale for Children (MASC) and to examine the moderating effects of gender and age on the associations in Taiwanese adolescent students aged at 11-18. Involvement in passive and physical bullying and belongings snatch and multiple dimensions of anxiety symptoms in 5537 adolescents were determined through use of the self-reported Chinese version of the School Bullying Experience Questionnaire (C-SBEQ) and the Taiwanese version of the MASC, respectively. The associations between four types of bullying involvement and four dimensions of anxiety symptoms and the moderating effects of gender and age were examined using linear mixed model analysis. The results indicated that except for the non-significant association between victimization by verbal and relational bullying and harm avoidance, both victims of verbal and relational bullying and physical bullying and belongings snatch reported more severe anxiety symptoms on all four dimensions of MASC-T than non-bullied subjects. While the perpetrators of verbal and relational bullying reported more severe physical symptoms and social anxiety than did non-perpetrators of verbal and relational bullying, the perpetrators of physical bullying and belongings snatch reported less harm avoidance, social anxiety and separation/panic than did non-perpetrators of physical bullying and belongings snatch. Perpetrator-victims of verbal and relational bullying showed more physical symptoms than those who were pure victims or perpetrators of verbal and relational bullying. Perpetrator-victims of physical bullying and belongings snatch had more social anxiety than those who were pure victims or perpetrators. This study also found that gender and age had the moderating effect on the association between some forms of bullying involvement and some dimensions of anxiety symptoms. The results of this study support the necessity to apply the multi-dimensional scale to evaluate anxiety symptoms in adolescents who are involved in bullying and to take the different directions of association into consideration when developing prevention and intervention programs. Copyright © 2013 Elsevier Ltd. All rights reserved.

Direct medical cost and utility analysis of diabetics outpatient at Karanganyar public hospital

NASA Astrophysics Data System (ADS)

Eristina; Andayani, T. M.; Oetari, R. A.

2017-11-01

Diabetes Mellitus is a high cost disease, especially in long-term complication treatment. Long-term complication treatment cost was a problem for the patient, it can affect patients quality of life stated with utility value. The purpose of this study was to determine the medical cost, utility value and leverage factors of diabetics outpatient. This study was cross sectional design, data collected from retrospective medical record of the financial and pharmacy department to obtain direct medical cost, utility value taken from EQ-5D-5L questionnaire. Data analyzed by Mann-Whitney and Kruskal-Wallis test. Results of this study were IDR 433,728.00 for the direct medical cost and pharmacy as the biggest cost. EQ-5D-5L questionnaire showed the biggest proportion on each dimension were 61% no problem on mobility dimension, 89% no problems on self-care dimension, 54% slight problems on usual activities dimension, 41% moderate problems on pain/discomfort dimension and 48% moderate problems on anxiety/depresion dimension. Build upon Thailand value set, utility value was 0.833. Direct medical cost was IDR 433,728.00 with leverage factors were pattern therapy, blood glucose level and complication. Utility value was 0.833 with leverage factors were patients characteristic, therapy pattern, blood glucose level and complication.

The Conditioning Influence of Organization Size Upon Managerial Practice

ERIC Educational Resources Information Center

Mahoney, Thomas A.; And Others

1972-01-01

Two dimensions of organization size -- unit size and size of parent organization -- are analyzed for independent and joint relationships with various dimensions of organizational behavior and managerial practice. Results suggest that managerial practices of delegation, staffing, and direction vary with size and moderate expected size influences…

Exploring Valued-Added Options - Edge-Glued Panels and Blanks Offer Value-Added Opportunities

Treesearch

Bob Smith; Philip A. Araman

1997-01-01

As sawmills search for new opportunities to add value to rough sawn lumber, many consider producing dimension parts as one solution. Assembling dimension parts into edge-glued panels or standard blanks can add even further value. Blanks are defined as pieces of solid wood (which may be edge-glued) that are manufactured to a predetermined size. This article discusses...

Evidence That Environmental and Familial Risks for Psychosis Additively Impact a Multidimensional Subthreshold Psychosis Syndrome.

PubMed

Pries, Lotta-Katrin; Guloksuz, Sinan; Ten Have, Margreet; de Graaf, Ron; van Dorsselaer, Saskia; Gunther, Nicole; Rauschenberg, Christian; Reininghaus, Ulrich; Radhakrishnan, Rajiv; Bak, Maarten; Rutten, Bart P F; van Os, Jim

2018-06-06

The observed link between positive psychotic experiences (PE) and psychosis spectrum disorder (PSD) may be stronger depending on concomitant presence of PE with other dimensions of psychopathology. We examined whether the effect of common risk factors for PSD on PE is additive and whether the impact of risk factors on the occurrence of PE depends on the co-occurrence of other symptom dimensions (affective dysregulation, negative symptoms, and cognitive alteration). Data from the Netherlands Mental Health Survey and Incidence Study 2 were used. Risk factors included childhood adversity, cannabis use, urbanicity, foreign born, hearing impairment, and family history of affective disorders. Logistic regression models were applied to test (1) the additive effect of risk factors (4 levels) on PE and (2) the moderating effects of symptom dimensions on the association between risk factors (present/absent) and PE, using additive interaction, expressed as the interaction contrast ratio. Risk factors were additive: the greater the number of risk factors, the greater the odds of PE. Furthermore, concomitant presence of the other symptom dimensions all increased the impact of risk factors on PE. After controlling for age, sex, and education, only affective dysregulation and negative symptoms remained significant moderators; only affective dysregulation remained a significant moderator if all dimensions were adjusted for each other. Risk factors may not be directly associated with PE but additively give rise to a multidimensional subthreshold state anticipating the multidimensional clinical syndrome. Early motivational and cognitive impairments in the context of PE may be reducible to affective dysregulation.

Preliminary findings of an investigation into the relationship between national culture and EQ-5D value sets.

PubMed

Bailey, Henry; Kind, Paul

2010-10-01

Despite the growing importance of the EQ-5D descriptive system as a basis for the valuation of QALYs in cost-utility analysis, for most countries, there are no EQ-5D value sets. Researchers and policy makers wishing to use the EQ-5D descriptive system in a country for which there is no value set are advised to use one from a nearby or 'similar' population. Factors other than geographic proximity can affect the relative values of EQ-5D states. This study explores the links between national culture and EQ-5D value sets. Rank correlation analysis is used to explore relationships between the relative values of a set of EQ-5D states and dimensions of national culture. The latter are taken from Hofstede's framework which operationalizes national culture in five dimensions. For the data currently available (countries for which EQ-5D value sets and scores on dimensions of culture both exist), moderate and strong correlations were found between the culture dimension of power distance and individualism and the EQ-5D dimensions of pain/discomfort and anxiety/depression. Moderate correlations were also observed between the cultural dimension of masculinity and the EQ-5D dimensions of self care, usual activities and pain/discomfort. Uncertainty avoidance correlates with the EQ-5D dimension of anxiety/depression. The correlation patterns observed are generally consistent with a priori expectations based on the nature of the dimensions of culture and the EQ-5D model. This analysis demonstrates the potential of national culture in providing insight into the drivers of the relative values of EQ-5D dimensions for different countries and in informing decisions about which EQ-5D value sets to use in situations where one does not exist.

Programmable DNA scaffolds for spatially-ordered protein assembly

NASA Astrophysics Data System (ADS)

Chandrasekaran, Arun Richard

2016-02-01

Ever since the notion of using DNA as a material was realized, it has been employed in the construction of complex structures that facilitate the assembly of nanoparticles or macromolecules with nanometer-scale precision. Specifically, tiles fashioned from DNA strands and DNA origami sheets have been shown to be suitable as scaffolds for immobilizing proteins with excellent control over their spatial positioning. Supramolecular assembly of proteins into periodic arrays in one or more dimensions is one of the most challenging aspects in the design of scaffolds for biomolecular investigations and macromolecular crystallization. This review provides a brief overview of how various biomolecular interactions with high degree of specificity such as streptavidin-biotin, antigen-antibody, and aptamer-protein interactions have been used to fabricate linear and multidimensional assemblies of structurally intact and functional proteins. The use of DNA-binding proteins as adaptors, polyamide recognition on DNA scaffolds and oligonucleotide linkers for protein assembly are also discussed.Ever since the notion of using DNA as a material was realized, it has been employed in the construction of complex structures that facilitate the assembly of nanoparticles or macromolecules with nanometer-scale precision. Specifically, tiles fashioned from DNA strands and DNA origami sheets have been shown to be suitable as scaffolds for immobilizing proteins with excellent control over their spatial positioning. Supramolecular assembly of proteins into periodic arrays in one or more dimensions is one of the most challenging aspects in the design of scaffolds for biomolecular investigations and macromolecular crystallization. This review provides a brief overview of how various biomolecular interactions with high degree of specificity such as streptavidin-biotin, antigen-antibody, and aptamer-protein interactions have been used to fabricate linear and multidimensional assemblies of structurally intact and functional proteins. The use of DNA-binding proteins as adaptors, polyamide recognition on DNA scaffolds and oligonucleotide linkers for protein assembly are also discussed. Dedicated to my advisor Ned Seeman on the occasion of his 70th birthday.

Conditions for successful data assimilation

NASA Astrophysics Data System (ADS)

Morzfeld, M.; Chorin, A. J.

2013-12-01

Many applications in science and engineering require that the predictions of uncertain models be updated by information from a stream of noisy data. The model and the data jointly define a conditional probability density function (pdf), which contains all the information one has about the process of interest and various numerical methods can be used to study and approximate this pdf, e.g. the Kalman filter, variational methods or particle filters. Given a model and data, each of these algorithms will produce a result. We are interested in the conditions under which this result is reasonable, i.e. consistent with the real-life situation one is modeling. In particular, we show, using idealized models, that numerical data assimilation is feasible in principle only if a suitably defined effective dimension of the problem is not excessive. This effective dimension depends on the noise in the model and the data, and in physically reasonable problems it can be moderate even when the number of variables is huge. In particular, we find that the effective dimension being moderate induces a balance condition between the noises in the model and the data; this balance condition is often satisfied in realistic applications or else the noise levels are excessive and drown the underlying signal. We also study the effects of the effective dimension on particle filters in two instances, one in which the importance function is based on the model alone, and one in which it is based on both the model and the data. We have three main conclusions: (1) the stability (i.e., non-collapse of weights) in particle filtering depends on the effective dimension of the problem. Particle filters can work well if the effective dimension is moderate even if the true dimension is large (which we expect to happen often in practice). (2) A suitable choice of importance function is essential, or else particle filtering fails even when data assimilation is feasible in principle with a sequential algorithm. (3) There is a parameter range in which the model noise and the observation noise are roughly comparable, and in which even the optimal particle filter collapses, even under ideal circumstances. We further study the role of the effective dimension in variational data assimilation and particle smoothing, for both the weak and strong constraint problem. It was found that these methods too require a moderate effective dimension or else no accurate predictions can be expected. Moreover, variational data assimilation or particle smoothing may be applicable in the parameter range where particle filtering fails, because the use of more than one consecutive data set helps reduce the variance which is responsible for the collapse of the filters.

New leak assembly based on fluidic nanochannels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Aiqing; Zhao, Yongheng; Wang, Xudi, E-mail: wxudi@hfut.edu.cn

2016-09-15

Fluidic nanochannels with a characteristic dimension of ∼280 nm were fabricated and designed as a leak assembly, where the nanochannels were formed on silicon wafers and enclosed with Pyrex{sup ®} glass. The geometric dimensions were characterized by scanning electron microscopy, and the gas flow conductance of He and other heavy gases (N{sub 2}, O{sub 2}, and Ar) was measured, and its uncertainty estimated, by the difference method. The results indicated that the measured flow conductance values were 45% less than the calculated flow conductance values. For helium, molecular flow was shown to occur at pressures ranging from vacuum to atmospheric pressure.more » As a consequence of the well-defined geometry, the prediction of flow conductance could be achieved for various gas species.« less

Dynamic Self-Assembly of Gold/Polymer Nanocomposites: pH-Encoded Switching between 1D Nanowires and 3D Nanosponges.

PubMed

Zhang, Qi; Xu, Tian-Yi; Zhao, Cai-Xin; Jin, Wei-Hang; Wang, Qian; Qu, Da-Hui

2017-10-05

The design of tunable dynamic self-assembly of nanoparticles with switchable assembled dimensions and morphologies is a challenging goal whose realization is vital for the evolution of smart nanomaterials. Herein, we report on chitosan polymer as an effective supramolecular "glue" for aldehyde-modified Au nanoparticles to reversibly modulate the states of self-assembled nanocomposites. By simultaneous integration of dynamic covalent Schiff base interactions and noncovalent hydrogen bonds, the chitosan/Au nanocomposites could reversibly transform their assembled morphologies from one-dimensional nanowires to three-dimensional nanosponges in response to the variation of pH value. Moreover, the obtained nanosponges could be used as an efficient pH-controlled cargo release system. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Moderating effect of self-efficacy on the relation between behavior problems in persons with dementia and the distress they cause in caregivers.

PubMed

Nogales-González, C; Romero-Moreno, R; Losada, A; Márquez-González, M; Zarit, S H

2015-01-01

Behavioral and psychological symptoms in dementia (BPSD) are the principal sources of stress in caregivers. The aim of the present work is to analyze the moderating effect of self-efficacy for managing BPSD on the distress these problems generate in family caregivers. The participants were 231 family caregivers of people with dementia. We assessed the frequency and caregiver distress associated with three dimensions of BPSD (depressive, disruptive and memory problems). In addition, we assessed the moderating effect of self-efficacy for dealing with BPSD in the relationship between the dementia patient's frequency of BPSD and caregiver distress through hierarchical regression analyses, one for each of the dimensions of BPSD. We found a moderating effect of self-efficacy on the relation between the frequency of BPSD and the distress in caregivers for the dimensions of depressive and disruptive behaviors. Caregivers having to deal with a high frequency of behavior problems but with high levels of self-efficacy presented significantly lower levels of distress associated with depressive and disruptive behavior problems compared to those caregivers with low levels of self-efficacy. No differences in the effects of self-efficacy were found for distress levels of caregivers who dealt with low frequency of BPSD. Also, we did not find a moderating effect of self-efficacy on the relation between the frequency of memory problems and caregivers' distress. The results suggest that self-efficacy for managing BPSD attenuates the relation between the frequency of behavior problems – both disruptive and depressive – and the distress they cause in caregivers.

Acquire an Bruker Dimension FastScanTM Atomic Force Microscope (AFM) for Materials, Physical and Biological Science Research and Education

DTIC Science & Technology

2016-04-14

study dynamic events such as melting, evaporation, crystallization, dissolution, self-assembly, membrane disruption, sample movement tracking. To... polymeric hairy nanopraticle, suprastructures REPORT DOCUMENTATION PAGE 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 10. SPONSOR/MONITOR’S ACRONYM(S...the AFM will permit us to study dynamic events such as melting, evaporation, crystallization, dissolution, self-assembly, membrane disruption, sample

Self-assembled 3D zinc borate florets via surfactant assisted synthesis under moderate pressures: Process temperature dependent morphology study

NASA Astrophysics Data System (ADS)

Mahajan, Dhiraj S.; Deshpande, Tushar; Bari, Mahendra L.; Patil, Ujwal D.; Narkhede, Jitendra S.

2018-04-01

In the present study, we prepared zinc borates using aqueous phase synthesis under moderate pressures (MP) (<150 psi) with ethanol as a co-solvent in the presence of a quaternary ammonium surfactant-Cetyltrimethylammonium bromide (CTAB). 3D morphologies of self-assembled zinc borate (Zn(H2O)B2O4 · 0.12 H2O, Zn3B6O12 · 3.5H2O, ZnB2O4) resembling flower-like structures were obtained by varying temperature under moderate pressure conditions. Synthesized zinc borates’ florets were morphologically characterized by Field Emission Scanning Electron Microscopy. The x-ray diffractions of borate species reveal rhombohydra, monoclinic and cubic phases of zinc borate crystals as a function of process temperature. Additionally, thermal analysis confirms excellent dehydration/degradation behavior for the zinc borate crystals synthesized at moderate pressures and elevated temperatures and could be utilized as potential flame retardant fillers in the polymer matrices.

Food Choice Motives When Purchasing in Organic and Conventional Consumer Clusters: Focus on Sustainable Concerns (The NutriNet-Santé Cohort Study).

PubMed

Baudry, Julia; Péneau, Sandrine; Allès, Benjamin; Touvier, Mathilde; Hercberg, Serge; Galan, Pilar; Amiot, Marie-Josèphe; Lairon, Denis; Méjean, Caroline; Kesse-Guyot, Emmanuelle

2017-01-24

The purpose of this study was to examine food choice motives associated with various organic and conventional dietary patterns among 22,366 participants of the NutriNet-Santé study. Dietary intakes were estimated using a food frequency questionnaire. Food choice motives were assessed using a validated 63-item-questionnaire gathered into nine food choice motive dimension scores: "absence of contaminants", "avoidance for environmental reasons", "ethics and environment", "taste", "innovation", "local and traditional production", "price", "health" and "convenience". Five consumers' clusters were identified: "standard conventional food small eaters", "unhealthy conventional food big eaters", "standard organic food small eaters", "green organic food eaters" and "hedonist moderate organic food eaters". Relationships between food choice motive dimension scores and consumers' clusters were assessed using analysis of covariance (ANCOVA) models adjusted for sociodemographic factors. "Green organic food eaters" had the highest mean score for the "health" dimension, while "unhealthy conventional food big eaters" obtained the lowest mean score for the "absence of contaminants" dimension. "Standard organic food small eaters", "green organic food eaters" and "hedonist moderate organic food eaters" had comparable scores for the "taste" dimension. "Unhealthy conventional food big eaters" had the highest mean score for the "price" dimension while "green organic food eaters" had the lowest mean scores for the "innovation" and "convenience" dimensions. These results provide new insights into the food choice motives of diverse consumers' profiles including "green" and "hedonist" eaters.

The impact of acquisition angle differences on three-dimensional quantitative coronary angiography.

PubMed

Tu, Shengxian; Holm, Niels R; Koning, Gerhard; Maeng, Michael; Reiber, Johan H C

2011-08-01

Three-dimensional (3D) quantitative coronary angiography (QCA) requires two angiographic views to restore vessel dimensions. This study investigated the impact of acquisition angle differences (AADs) of the two angiographic views on the assessed dimensions by 3D QCA. X-ray angiograms of an assembled brass phantom with different types of straight lesions were recorded at multiple angiographic projections. The projections were randomly matched as pairs and 3D QCA was performed in those pairs with AAD larger than 25°. The lesion length and diameter stenosis in three different lesions, a circular concentric severe lesion (A), a circular concentric moderate lesion (B), and a circular eccentric moderate lesion (C), were measured by 3D QCA. The acquisition protocol was repeated for a silicone bifurcation phantom, and the bifurcation angles and bifurcation core volume were measured by 3D QCA. The measurements were compared with the true dimensions if applicable and their correlation with AAD was studied. 50 matched pairs of angiographic views were analyzed for the brass phantom. The average value of AAD was 48.0 ± 14.1°. The percent diameter stenosis was slightly overestimated by 3D QCA for all lesions: A (error 1.2 ± 0.9%, P < 0.001); B (error 0.6 ± 0.5%, P < 0.001); C (error 1.1 ± 0.6%, P < 0.001). The correlation of the measurements with AAD was only significant for lesion A (R(2) = 0.151, P = 0.005). The lesion length was slightly overestimated by 3D QCA for lesion A (error 0.06 ± 0.18 mm, P = 0.026), but well assessed for lesion B (error -0.00 ± 0.16 mm, P = 0.950) and lesion C (error -0.01 ± 0.18 mm, P = 0.585). The correlation of the measurements with AAD was not significant for any lesion. Forty matched pairs of angiographic views were analyzed for the bifurcation phantom. The average value of AAD was 49.1 ± 15.4°. 3D QCA slightly overestimated the proximal angle (error 0.4 ± 1.1°, P = 0.046) and the distal angle (error 1.5 ± 1.3°, P < 0.001). The correlation with AAD was only significant for the distal angle (R(2) = 0.256, P = 0.001). The correlation of bifurcation core volume measurements with AAD was not significant (P = 0.750). Of the two aforementioned measurements with significant correlation with AAD, the errors tended to increase as AAD became larger. 3D QCA can be used to reliably assess vessel dimensions and bifurcation angles. Increasing the AAD of the two angiographic views does not increase accuracy and precision of 3D QCA for circular lesions or bifurcation dimensions. Copyright © 2011 Wiley-Liss, Inc.

Fuel assembly for the production of tritium in light water reactors

DOEpatents

Cawley, W.E.; Trapp, T.J.

1983-06-10

A nuclear fuel assembly is described for producing tritium in a light water moderated reactor. The assembly consists of two intermeshing arrays of subassemblies. The first subassemblies comprise concentric annular elements of an outer containment tube, an annular target element, an annular fuel element, and an inner neutron spectrums shifting rod. The second subassemblies comprise an outer containment tube and an inner rod of either fuel, target, or neutron spectrum shifting neutral.

Fuel assembly for the production of tritium in light water reactors

DOEpatents

Cawley, William E.; Trapp, Turner J.

1985-01-01

A nuclear fuel assembly is described for producing tritium in a light water moderated reactor. The assembly consists of two intermeshing arrays of subassemblies. The first subassemblies comprise concentric annular elements of an outer containment tube, an annular target element, an annular fuel element, and an inner neutron spectrums shifting rod. The second subassemblies comprise an outer containment tube and an inner rod of either fuel, target, or neutron spectrum shifting neutral.

Documenting different domains of promotion of autonomy in families.

PubMed

Manzi, Claudia; Regalia, Camillo; Pelucchi, Sara; Fincham, Frank D

2012-04-01

Parental promotion of autonomy for offspring well-being has been widely recognized in developmental psychology. Recent studies, however, show that this association varies across cultures. Such variation may reflect inappropriate measurement of this dimension of parenting. Therefore, three existing measures of promotion of autonomy were used to derive different dimensions related to the promotion of autonomy in three different domains - promotion of autonomous thought, promotion of autonomous decision-making, and promotion of physical separation. The cross-cultural significance of this three-component model was tested in samples of late adolescents (n = 1361) from four nations- the US, Belgium, Italy and China. Data from all four countries best fit a three dimensional model but the covariance between the three dimensions was moderated by culture. Culture also moderated the impact of promotion of autonomy on offspring well-being. Copyright © 2011 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

TEMPERAMENT, FAMILY ENVIRONMENT, AND BEHAVIOR PROBLEMS IN CHILDREN WITH NEW-ONSET SEIZURES

PubMed Central

Baum, Katherine T.; Byars, Anna W.; deGrauw, Ton J.; Johnson, Cynthia S.; Perkins, Susan M.; Dunn, David W.; Bates, John E.; Austin, Joan K.

2007-01-01

Children with epilepsy, even those with new-onset seizures, exhibit relatively high rates of behavior problems. The purpose of this study was to explore the relationships among early temperament, family adaptive resources, and behavior problems in children with new-onset seizures. Our major goal was to test whether family adaptive resources moderated the relationship between early temperament dimensions and current behavior problems in 287 children with new-onset seizures. Two of the three temperament dimensions (difficultness and resistance to control) were positively correlated with total, internalizing, and externalizing behavior problems (all p < 0.0001). The third temperament dimension, unadaptability, was positively correlated with total and internalizing problems (p < 0.01). Family adaptive resources moderated the relationships between temperament and internalizing and externalizing behavior problems at school. Children with a difficult early temperament who live in a family environment with low family mastery are at the greatest risk for behavior problems. PMID:17267291

Exploring the Influence of New Technology Planning and Implementation on the Perceptions of New Technology Effectiveness

ERIC Educational Resources Information Center

Bellamy, Al

2007-01-01

This study explored influences that perceptions of new technology implementation and planning processes, and dimensions of organizational climate have on perceptions of new technology deployment effectiveness. It also examined the extent to which dimensions of organizational climate moderates the relationships among new technology implementation,…

Young Mothers' Involvement in a Prenatal and Postpartum Support Program

ERIC Educational Resources Information Center

Wen, Xiaoli; Korfmacher, Jon; Hans, Sydney L.; Henson, Linda G.

2010-01-01

The involvement of 124 young mothers in a doula support program was measured in two dimensions--quantity of program contact and quality of mother-doula helping relationship. The study examined each dimension's differential associations with maternal outcomes, as well as the moderating effects of mother characteristics on these associations.…

Psychometric and Edumetric Validity of Dimensions of Geomorphological Knowledge Which Are Tapped by Concept Mapping.

ERIC Educational Resources Information Center

Hoz, Ron; Bowman, Dan; Chacham, Tova

1997-01-01

Students (N=14) in a geomorphology course took an objective geomorphology test, the tree construction task, and the Standardized Concept Structuring Analysis Technique (SConSAT) version of concept mapping. Results suggest that the SConSAT knowledge structure dimensions have moderate to good construct validity. Contains 82 references. (DDR)

Lipid-bilayer-assisted two-dimensional self-assembly of DNA origami nanostructures

NASA Astrophysics Data System (ADS)

Suzuki, Yuki; Endo, Masayuki; Sugiyama, Hiroshi

2015-08-01

Self-assembly is a ubiquitous approach to the design and fabrication of novel supermolecular architectures. Here we report a strategy termed `lipid-bilayer-assisted self-assembly' that is used to assemble DNA origami nanostructures into two-dimensional lattices. DNA origami structures are electrostatically adsorbed onto a mica-supported zwitterionic lipid bilayer in the presence of divalent cations. We demonstrate that the bilayer-adsorbed origami units are mobile on the surface and self-assembled into large micrometre-sized lattices in their lateral dimensions. Using high-speed atomic force microscopy imaging, a variety of dynamic processes involved in the formation of the lattice, such as fusion, reorganization and defect filling, are successfully visualized. The surface modifiability of the assembled lattice is also demonstrated by in situ decoration with streptavidin molecules. Our approach provides a new strategy for preparing versatile scaffolds for nanofabrication and paves the way for organizing functional nanodevices in a micrometer space.

Lipid-bilayer-assisted two-dimensional self-assembly of DNA origami nanostructures

PubMed Central

Endo, Masayuki; Sugiyama, Hiroshi

2015-01-01

Self-assembly is a ubiquitous approach to the design and fabrication of novel supermolecular architectures. Here we report a strategy termed ‘lipid-bilayer-assisted self-assembly' that is used to assemble DNA origami nanostructures into two-dimensional lattices. DNA origami structures are electrostatically adsorbed onto a mica-supported zwitterionic lipid bilayer in the presence of divalent cations. We demonstrate that the bilayer-adsorbed origami units are mobile on the surface and self-assembled into large micrometre-sized lattices in their lateral dimensions. Using high-speed atomic force microscopy imaging, a variety of dynamic processes involved in the formation of the lattice, such as fusion, reorganization and defect filling, are successfully visualized. The surface modifiability of the assembled lattice is also demonstrated by in situ decoration with streptavidin molecules. Our approach provides a new strategy for preparing versatile scaffolds for nanofabrication and paves the way for organizing functional nanodevices in a micrometer space. PMID:26310995

Effects of Sexual Experience on Dating Desirability and Marriage Desirability: An Experimental Study.

ERIC Educational Resources Information Center

Istvan, Joseph; Griffitt, William

1980-01-01

Inexperienced men and both inexperienced and moderately experienced women rated highly experienced opposite-sex peers as less desirable dates and marriage partners. Moderately and highly experienced men and highly experienced women tended to rate all opposite-sex peers similarly along these same dimensions. (Author)

Psychological Separation and Adjustment to University: Moderating Effects of Gender, Age, and Perceived Parenting Style.

ERIC Educational Resources Information Center

Beyers, Wim; Goossens, Luc

2003-01-01

Examined the association between psychological separation and adjustment to university among college students. Found that two dimensions of psychological separation--independence from parents and positive separation feelings--predicted better adjustment to college life. Independence from parents was moderated by grade, gender, and perceived…

Metal bellows custom-fabricated from tubing

NASA Technical Reports Server (NTRS)

1965-01-01

Mandrel assembly mounted in a lathe chuck is used with a forming wheel to roll-form bellows from standard sheet metal tubing. Spacers and mandrels of various sizes custom-fabricate bellows of any desired dimensions.

Three-Dimensional Structures Self-Assembled from DNA Bricks

PubMed Central

Ke, Yonggang; Ong, Luvena L.; Shih, William M.; Yin, Peng

2013-01-01

We describe a simple and robust method to construct complex three-dimensional (3D) structures using short synthetic DNA strands that we call “DNA bricks”. In one-step annealing reactions, bricks with hundreds of distinct sequences self-assemble into prescribed 3D shapes. Each 32-nucleotide brick is a modular component; it binds to four local neighbors and can be removed or added independently. Each 8-base-pair interaction between bricks defines a voxel with dimensions 2.5 nanometers by 2.5 nanometers by 2.7 nanometers, and a master brick collection defines a “molecular canvas” with dimensions of 10 by 10 by 10 voxels. By selecting subsets of bricks from this canvas, we constructed a panel of 102 distinct shapes exhibiting sophisticated surface features as well as intricate interior cavities and tunnels. PMID:23197527

Psychological control by parents is associated with a higher child weight.

PubMed

Rodenburg, Gerda; Kremers, Stef P J; Oenema, Anke; van de Mheen, Dike

2011-10-01

In this examination of the association between parenting style and child weight, the neglected concept of 'psychological control' has been added to the generally accepted parenting dimensions 'support' and 'behavioural control'. Also explored is whether the potential association between parenting and child weight is moderated by socio-demographic variables (child's age/ethnicity, and parent's education level). A cross-sectional study was performed among 1,665 parent-child dyads. The children's mean age was 8 years. Their height and weight were measured to calculate their body mass index (BMI). Parents completed a questionnaire to measure the three parenting dimensions. Based on these dimensions, five parenting styles were defined: the authoritative, permissive, authoritarian, neglecting and rejecting parenting style. Child BMI z-scores were regressed on parenting style, adjusting for parental BMI, child ethnicity, and parent's education level. Rejecting parenting, characterized by high psychological control, low support and low behavioural control, is the only parenting style significantly related to child BMI z-scores (β = 0.074, p < 0.001). The positive association was not moderated by socio-demographic variables. By adding the dimension of psychological control to the concept of parenting, this study has further elucidated the mechanisms whereby parenting may affect child weight. Demonstrating that 'rejecting parenting' is associated with a higher child weight, emphasizes the need for longitudinal studies in which parenting style is measured three-dimensionally. Potential mediating effects of parental feeding style and children's eating style, as well as age moderation, should be included in these studies.

Burnout in Otolaryngology-Head and Neck Surgery: A Single Academic Center Experience.

PubMed

Geelan-Hansen, Katie; Anne, Samantha; Benninger, Michael S

2018-05-01

Burnout in modern medicine is becoming more recognized and researched. The objective in this study is to evaluate burnout in a tertiary care academic institution and compare results among faculty, trainees, and advanced practice practitioners (APPs) in a cross-sectional survey using the Maslach Burnout Inventory. Fifty-two surveys were distributed; 44 participants completed the survey (85%): 25 staff physicians (57%), 14 resident physicians (32%), and 5 nurse practitioners (11%). Staff physicians had low emotional exhaustion, moderate depersonalization, and low result for reduced personal accomplishments; trainees reported low emotional exhaustion, high depersonalization, and moderate reduced personal accomplishment; and nurse practitioners reported moderate on all 3 dimensions. There is overall low burnout in this tertiary care academic center of otolaryngologist providers and no difference in rates among the different groups (trainees, APPs, staff). Measures addressing specific deficiencies among dimensions of burnout would be helpful to prevent disintegration of physician satisfaction into burnout.

Perceived Emotion Control Moderates the Relationship between Neuroticism and Generalized Anxiety Disorder

PubMed Central

Bourgeois, Michelle L.; Brown, Timothy A.

2015-01-01

The relationships between neuroticism, perceived emotion control, and generalized anxiety disorder (GAD) severity were examined in 293 individuals diagnosed with GAD at a specialty anxiety disorders clinic. Hierarchical regression analyses performed within a structural equation modeling framework revealed that (1) neuroticism and perceived emotion control both predicted a latent variable of GAD in the expected direction, and (2) perceived emotion control moderated the relationship between neuroticism and GAD severity, such that lower levels of perceived emotion control were associated with a stronger relationship between neuroticism and GAD severity. The other dimensions of perceived control (i.e., stress and threat control) did not moderate the effect of neuroticism on GAD severity. The findings are discussed with regard to their implications to conceptual models of the psychopathology of GAD, and theory-based differential relationships between dimensions of vulnerability, perceived control, and anxiety disorders. PMID:26236059

Improved particle impactor assembly for size selective high volume air sampler

DOEpatents

Langer, G.

1987-03-23

Air containing entrained particulate matter is directed through a plurality of parallel, narrow, vertically oriented apertures of an inlet element toward an adjacently located, relatively large, dust impaction surface preferably covered with an adhesive material. The air flow turns over the impaction surface, leaving behind, the relatively larger particles and passes through two elongate apertures defining the outer bounds of the impaction collection surface to pass through divergent passages which slow down and distribute the air flow, with entrained smaller particles, over a fine filter element that separates the fine particles from the air. By appropriate selection of dimensions and the number of inlet apertures air flow through the inlet element is provided a nonuniform velocity distribution with the lower velocities being obtained near the center of the inlet apertures, to separate out particles larger than a certain predetermined size on the impaction collection surface. The impaction collection surface, even in a moderately sized apparatus, is thus relatively large and permits the prolonged sampling of air for periods extending to four weeks. 6 figs.

Cross-cultural generalizability of personality dimensions: relating indigenous and imported dimensions in two cultures.

PubMed

Katigbak, M S; Church, A T; Akamine, T X

1996-01-01

The cross-cultural generalizability of personality dimensions was investigated by (a) identifying indigenous Philippine dimensions, (b) testing the cross-cultural replicability of the NEO 5-factor model (P. T. Costa & R.R. McCrae, 1992), and (c) relating Philippine and Western dimensions in Philippine and U.S. samples of college students. Filipino self-ratings (N = 536) on indigenous items were factor analyzed, and 6 Philippine dimensions were obtained. Conclusions about the replicability of the 5-factor model in the Philippines (N = 432) depended on whether exploratory, Procrustes, or confirmatory factor methods were used. In regression and joint factor analyses, moderate to strong associations were found between the Philippine dimensions and (a) dimensions from the 5-factor model in both Philippine (N = 387) and U.S. (N = 610) samples, and (b) the Tellegen model (A. Tellegen, 1985; A. Tellegen & N.G. Waller, in press) in a U.S. sample (N = 603).

Vertically aligned single-walled carbon nanotubes by chemical assembly--methodology, properties, and applications.

PubMed

Diao, Peng; Liu, Zhongfan

2010-04-06

Single-walled carbon nanotubes (SWNTs), as one of the most promising one-dimension nanomaterials due to its unique structure, peculiar chemical, mechanical, thermal, and electronic properties, have long been considered as an important building block to construct ordered alignments. Vertically aligned SWNTs (v-SWNTs) have been successfully prepared by using direct growth and chemical assembly strategies. In this review, we focus explicitly on the v-SWNTs fabricated via chemical assembly strategy. We provide the readers with a full and systematic summary covering the advances in all aspects of this area, including various approaches for the preparation of v-SWNTs using chemical assembly techniques, characterization, assembly kinetics, and electrochemical properties of v-SWNTs. We also review the applications of v-SWNTs in electrochemical and bioelectrochemical sensors, photoelectric conversion, and scanning probe microscopy.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warren, Oden Lee; Asif, Syed Amanulla Syed; Oh, Yunje

A testing instrument for mechanical testing at nano or micron scale includes a transducer body, and a coupling shaft coupled with a probe tip. A transducer body houses a capacitor. The capacitor includes first and second counter electrodes and a center electrode assembly interposed therebetween. The center electrode assembly is movable with the coupling shaft relative to the first and second counter electrodes, for instance in one or more of dimensions including laterally and normally. The center electrode assembly includes a center plate coupled with the coupling shaft and one or more springs extending from the center plate. Upper andmore » lower plates are coupled with the center plate and cover the center plate and the one or more springs. A shaft support assembly includes one or more support elements coupled along the coupling shaft. The shaft support assembly provides lateral support to the coupling shaft.« less

Mid-infrared Plasmonic Circular Dichroism Generated by Graphene Nanodisk Assemblies.

PubMed

Kong, Xiang-Tian; Zhao, Runbo; Wang, Zhiming; Govorov, Alexander O

2017-08-09

It is very interesting to bring plasmonic circular dichroism spectroscopy to the mid-infrared spectral interval, and there are two reasons for this. This spectral interval is very important for thermal bioimaging, and simultaneously, this spectral range includes vibrational lines of many chiral biomolecules. Here we demonstrate that graphene plasmons indeed offer such opportunity. In particular, we show that chiral graphene assemblies consisting of a few graphene nanodisks can generate strong circular dichroism (CD) in the mid-infrared interval. The CD signal is generated due to the plasmon-plasmon coupling between adjacent nanodisks in the specially designed chiral graphene assemblies. Because of the large dimension mismatch between the thickness of a graphene layer and the incoming light's wavelength, three-dimensional configurations with a total height of a few hundred nanometers are necessary to obtain a strong CD signal in the mid-infrared range. The mid-infrared CD strength is mainly governed by the total dimensions (total height and helix scaffold radius) of the graphene nanodisk assembly and by the plasmon-plasmon interaction strength between its constitutive nanodisks. Both positive and negative CD bands can be observed in the graphene assembly array. The frequency interval of the plasmonic CD spectra overlaps with the vibrational modes of some important biomolecules, such as DNA and many different peptides, giving rise to the possibility of enhancing the vibrational optical activity of these molecular species by attaching them to the graphene assemblies. Simultaneously the spectral range of chiral mid-infrared plasmons in our structures appears near the typical wavelength of the human-body thermal radiation, and therefore, our chiral metastructures can be potentially utilized as optical components in thermal imaging devices.

Neuroticism as a Moderator of Direct and Mediated Relationships Between Introversion-Extraversion and Well-Being.

PubMed

Fadda, Daniela; Scalas, L Francesca

2016-02-01

Among personality traits, extraversion has received major theoretical and empirical attention as predictor of subjective well-being (SWB), whereas the role of emotional stability-neuroticism has been partially neglected. The present study aims to study the role of neuroticism in the relationship between introversion-extraversion and SWB. In particular, we explored if the trait of neuroticism moderates the relationships between introversion-extraversion and SWB dimensions (Satisfaction with life, Mastery, Vigour, Social Cheerfulness), directly and by mediation of self-esteem. Indeed, previous studies have suggested that self-esteem is positively associated with high extraversion and low neuroticism and that it positively mediates the relationship between SWB and personality traits in adolescents. For this purpose, a sample of high school students (N = 1173) completed the Oxford Happiness Inventory, the Rosenberg Self-Esteem Scale and the Big Five Questionnaire. In a latent variable model, we examined the interaction effects (direct and indirect) of extraversion and neuroticism on SWB dimensions. Our results showed that the nature of differences between introverts and extraverts on SWB could be related to the level of neuroticism in relation to Satisfaction with life. Moreover, self-esteem mediated the relationship between personality traits and SWB. In particular, mediated moderation effect analysis showed that self-esteem mediates completely the relationship between the interaction term (extraversion x neuroticism) and Mastery, and partially the relationship with Satisfaction with life. Moreover, moderated mediation effect analysis showed that high levels of neuroticism moderate the effect of extraversion on Satisfaction with life and Mastery through the mediation of self-esteem. In conclusion, our results suggest that although extraversion has a cardinal role on SWB dimensions related to Vigour and Social Cheerfulness, neuroticism and the mediating role of self-esteem should more properly considered in relation to Satisfaction with life and Mastery.

A Moderated Mediation Model: Racial Discrimination, Coping Strategies, and Racial Identity among Black Adolescents

ERIC Educational Resources Information Center

Seaton, Eleanor K.; Upton, Rachel; Gilbert, Adrianne; Volpe, Vanessa

2014-01-01

This study examined a moderated mediation model among 314 Black adolescents aged 13-18. The model included general coping strategies (e.g., active, distracting, avoidant, and support-seeking strategies) as mediators and racial identity dimensions (racial centrality, private regard, public regard, minority, assimilationist, and humanist ideologies)…

Caregiver Responsiveness during Preschool Supports Cooperation in Kindergarten: Moderation by Children's Early Compliance

ERIC Educational Resources Information Center

Pratt, Megan E.; Lipscomb, Shannon T.; McClelland, Megan M.

2016-01-01

Research Findings: The current study examined how children's parent-reported compliance at age 3 (36 months) moderated the effects of 2 dimensions of directly observed early care and education (ECE) process quality (positivity/responsivity and cognitive stimulation) during the prekindergarten year (54 months) on teacher reports of children's…

Students' Scientific Epistemic Beliefs, Online Evaluative Standards, and Online Searching Strategies for Science Information: The Moderating Role of Cognitive Load Experience

NASA Astrophysics Data System (ADS)

Hsieh, Ya-Hui; Tsai, Chin-Chung

2014-06-01

The purpose of this study is to examine the moderating role of cognitive load experience between students' scientific epistemic beliefs and information commitments, which refer to online evaluative standards and online searching strategies. A total of 344 science-related major students participated in this study. Three questionnaires were used to ascertain the students' scientific epistemic beliefs, information commitments, and cognitive load experience. Structural equation modeling was then used to analyze the moderating effect of cognitive load, with the results revealing its significant moderating effect. The relationships between sophisticated scientific epistemic beliefs and the advanced evaluative standards used by the students were significantly stronger for low than for high cognitive load students. Moreover, considering the searching strategies that the students used, the relationships between sophisticated scientific epistemic beliefs and advanced searching strategies were also stronger for low than for high cognitive load students. However, for the high cognitive load students, only one of the sophisticated scientific epistemic belief dimensions was found to positively associate with advanced evaluative standard dimensions.

Personality factors moderate the associations between Apolipoprotein genotype and cognitive function as well as late onset Alzheimer’s Disease

PubMed Central

Dar-Nimrod, Ilan; Chapman, Benjamin P.; Franks, Peter; Robbins, John; Porsteinsson, Anton; Mapstone, Mark; Duberstein, Paul R.

2014-01-01

Objectives We tested the hypothesis that neuroticism moderates the association between APOE (apolipoprotein E) genotype and two major outcomes, cognitive function and Alzheimer’s disease (AD). We also explored whether other personality dimensions (extraversion, openness to experience, agreeableness, and conscientiousness) moderate the associations of APOE with these outcomes. Design Primary analyses of existing randomized clinical trial data. Sample Six-hundred and two older adults (mean age of 78 at baseline). Measurements APOE genotype, the NEO-Five Factor Inventory, the Alzheimer’s Disease Assessment Scale- cognitive (ADAS-COG: measured every 6 months for 6.5 years) and relevant covariates. Results Fully adjusted multivariate analyses showed that the association between the presence of APOE ε-4 allele(s) and both outcomes was evident among individuals with high levels of neuroticism and extraversion but not among persons with low levels of these traits. Conclusions Phenotypic personality dimensions, primarily neuroticism and extraversion, moderate the relationship between APOE ε-4 genotype and cognitive outcomes among older adults. Future research is needed to elucidate the physiological processes involved in these particular phenotype-genotype interactions. PMID:23079898

Personal dimensions of identity and empirical research in APA journals.

PubMed

Munley, Patrick H; Anderson, Mary Z; Baines, Tonita C; Borgman, Amy L; Briggs, Denise; Dolan, James P; Koyama, Miki

2002-11-01

This study reviewed 402 empirical research papers published during 1999 in 9 American Psychological Association journals from the perspective of the Personal Dimensions of Identity (PDI) model. Descriptions of participants were reviewed to determine whether researchers reported information concerning Dimensions A, B, and C of the PDI model. PDI A and B Dimensions of age, gender, education, and geographic location were reported with the highest frequency: 88.56%, 89.30%, 78.50%, and 73.88%, respectively, whereas race/ethnicity was reported with moderate frequency, 60.70%. The remaining PDI A Dimensions of language, physical disability, sexual orientation, and social class, and the remaining B Dimensions of citizenship status, employment status, income, marital status, military experience, occupation, and religion, were reported in relatively low percentages of studies.

Sabot assembly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bzorgi, Fariborz

A sabot assembly includes a projectile and a housing dimensioned and configured for receiving the projectile. An air pressure cavity having a cavity diameter is disposed between a front end and a rear end of the housing. Air intake nozzles are in fluid communication with the air pressure cavity and each has a nozzle diameter less than the cavity diameter. In operation, air flows through the plurality of air intake nozzles and into the air pressure cavity upon firing of the projectile from a gun barrel to pressurize the air pressure cavity for assisting in separation of the housing frommore » the projectile upon the sabot assembly exiting the gun barrel.« less

The Influence of Personal Well-Being on Learning Achievement in University Students Over Time: Mediating or Moderating Effects of Internal and External University Engagement

PubMed Central

Yu, Lu; Shek, Daniel T. L.; Zhu, Xiaoqin

2018-01-01

The current study examined the relationship between students' personal well-being and their learning achievement during university study, and whether such relationship would be mediated or moderated by university engagement. A total of 434 university students from one public university in Hong Kong participated in the study. The participants completed an online survey consisting of personal well-being (cognitive behavioral competence and general positive youth development), university engagement, and learning achievement measures (personal growth, and accumulated GPA as academic achievement) at four time points with a 1-year interval. Results showed that personal well-being measured at the beginning of university study positively predicted students' personal growth and academic achievement after 3 years' study. While the internal dimensions of university engagement (academic challenge and learning with peers) showed longitudinal significant mediational effect, the external dimensions (experience with faculty and campus environment) did not have significant longitudinal moderating effect. Nevertheless, external dimensions of student engagement also showed direct effect on personal growth and academic achievement. The long-standing positive effects of personal well-being on university engagement and subsequently, learning achievement during university years call for more attention to the promotion of holistic development among university students in Hong Kong. PMID:29375421

Isolated pseudohypoplasia of the right ventricle.

PubMed

Pastor, Esteban; Aramendi, José I; Luis, Maite; Voces, Roberto; Rodríguez, Miguel A; Galdeano, José M

2007-08-01

We present a case of a 12-year-old girl with severe cyanosis due to abnormal moderator band producing a hidden trabecular component of the right ventricle, mimicking isolated hypoplasia of the right ventricle. A marked hypoplasia was confirmed by echocardiography and catheterization. At operation an anomalously thickened moderator band obstructing the apical infundibulum was found. Repair consisted of a section of the moderator band and closure of the atrial septal defect. Postoperatively the right ventricle showed normal dimension and function.

Superhydrophobic surfaces

DOEpatents

Wang, Evelyn N; McCarthy, Matthew; Enright, Ryan; Culver, James N; Gerasopoulos, Konstantinos; Ghodssi, Reza

2015-03-24

Surfaces having a hierarchical structure--having features of both microscale and nanoscale dimensions--can exhibit superhydrophobic properties and advantageous condensation and heat transfer properties. The hierarchical surfaces can be fabricated using biological nanostructures, such as viruses as a self-assembled nanoscale template.

Fast-response cup anemometer features cosine response

NASA Technical Reports Server (NTRS)

Frenzen, P.

1968-01-01

Six-cup, low-inertia anemometer combines high resolution and fast response with a unique ability to sense only the horizontal component of the winds fluctuating rapidly in three dimensions. Cup assemblies are fabricated of expanded polystyrene plastic.

Ensuring the relocatability of programs in the operational system DOS YeS

NASA Technical Reports Server (NTRS)

Novoseltsev, S. K.; Orlov, I. G.; Chesalin, A. S.

1979-01-01

Specific modifications in the Disk Operational System Unified Series to insure the relocatability of programs stored permanently in the core image library is described. A self-relocating method for loading programs into the working memory with re-editing all the programs recorded in the core image library is presented. The modified linkage editor can be included in a relocation dictionary containing data about each address constant at the assembly stage at the request of the programmer. The relocation dictionary increases the dimension of the RL-phase in comparison with the dimension of this same phase when edited by the standard method, making possible the creation of multiphase program complexes. Generation and use of the modified system using Assembly language is described. An example of the use of the system is given, and limitations of the use of the relocatable programs in the modified system are outlined.

Modeling and optimization of shape memory-superelastic antagonistic beam assembly

NASA Astrophysics Data System (ADS)

Tabesh, Majid; Elahinia, Mohammad H.

2010-04-01

Superelasticity (SE), shape memory effect (SM), high damping capacity, corrosion resistance, and biocompatibility are the properties of NiTi that makes the alloy ideal for biomedical devices. In this work, the 1D model developed by Brinson was modified to capture the shape memory effect, superelasticity and hysteresis behavior, as well as partial transformation in both positive and negative directions. This model was combined with the Euler beam equation which, by approximation, considers 1D compression and tension stress-strain relationships in different layers of a 3D beam assembly cross-section. A shape memory-superelastic NiTi antagonistic beam assembly was simulated with this model. This wire-tube assembly is designed to enhance the performance of the pedicle screws in osteoporotic bones. For the purpose of this study, an objective design is pursued aiming at optimizing the dimensions and initial configurations of the SMA wire-tube assembly.

Grinding assembly, grinding apparatus, weld joint defect repair system, and methods

DOEpatents

Larsen, Eric D.; Watkins, Arthur D.; Bitsoi, Rodney J.; Pace, David P.

2005-09-27

A grinding assembly for grinding a weld joint of a workpiece includes a grinder apparatus, a grinder apparatus includes a grinding wheel configured to grind the weld joint, a member configured to receive the grinding wheel, the member being configured to be removably attached to the grinder apparatus, and a sensor assembly configured to detect a contact between the grinding wheel and the workpiece. The grinding assembly also includes a processing circuitry in communication with the grinder apparatus and configured to control operations of the grinder apparatus, the processing circuitry configured to receive weld defect information of the weld joint from an inspection assembly to create a contour grinding profile to grind the weld joint in a predetermined shape based on the received weld defect information, and a manipulator having an end configured to carry the grinder apparatus, the manipulator further configured to operate in multiple dimensions.

Structural and optical properties of self-assembled chains of plasmonic nanocubes

DOE PAGES

Klinkova, Anna; Gang, Oleg; Therien-Aubin, Heloise; ...

2014-10-10

Solution-based linear self-assembly of metal nanoparticles offers a powerful strategy for creating plasmonic polymers, which, so far, have been formed from spherical nanoparticles and nanorods. Here, we report linear solution-based self-assembly of metal nanocubes (NCs), examine the structural characteristics of the NC chains and demonstrate their advanced optical characteristics. Predominant face-to-face assembly of large NCs coated with short polymer ligands led to a larger volume of hot spots in the chains, a nearly uniform E-field enhancement in the gaps between co-linear NCs and a new coupling mode for NC chains, in comparison with chains of nanospheres with similar dimensions, compositionmore » and surface chemistry. The NC chains exhibited a stronger surface enhanced Raman scattering (SERS) signal, in comparison with linear assemblies of nanospheres. The experimental results were in agreement with finite difference time domain (FDTD) simulations.« less

Programmable DNA scaffolds for spatially-ordered protein assembly.

PubMed

Chandrasekaran, Arun Richard

2016-02-28

Ever since the notion of using DNA as a material was realized, it has been employed in the construction of complex structures that facilitate the assembly of nanoparticles or macromolecules with nanometer-scale precision. Specifically, tiles fashioned from DNA strands and DNA origami sheets have been shown to be suitable as scaffolds for immobilizing proteins with excellent control over their spatial positioning. Supramolecular assembly of proteins into periodic arrays in one or more dimensions is one of the most challenging aspects in the design of scaffolds for biomolecular investigations and macromolecular crystallization. This review provides a brief overview of how various biomolecular interactions with high degree of specificity such as streptavidin-biotin, antigen-antibody, and aptamer-protein interactions have been used to fabricate linear and multidimensional assemblies of structurally intact and functional proteins. The use of DNA-binding proteins as adaptors, polyamide recognition on DNA scaffolds and oligonucleotide linkers for protein assembly are also discussed.

Rack assembly for mounting solar modules

DOEpatents

Plaisted, Joshua Reed; West, Brian

2010-12-28

A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

Rack assembly for mounting solar modules

DOEpatents

Plaisted, Joshua Reed; West, Brian

2012-09-04

A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures to be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

Rack assembly for mounting solar modules

DOEpatents

Plaisted, Joshua Reed; West, Brian

2014-06-10

A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

Middle School Improvement and Reform: Development and Validation of a School-Level Assessment of Climate, Cultural Pluralism, and School Safety.

ERIC Educational Resources Information Center

Brand, Stephen; Felner, Robert; Shim, Minsuk; Seitsinger, Anne; Dumas, Thaddeus

2003-01-01

Examines the structure of perceived school climate and the relationship of climate dimensions to adaptation of students who attend middle-grade-level schools. The climate scales exhibited a stable dimensional structure, high levels of internal consistency, and moderate levels of stability. Ratings of multiple climate dimensions were associated…

The relationship between the big five personality dimensions and acute psychopathology: mediating and moderating effects of coping strategies.

PubMed

Mirnics, Zsuzsanna; Heincz, Orsolya; Bagdy, Gyorgy; Surányi, Zsuzsanna; Gonda, Xenia; Benko, Anita; Molnar, Eszter; Jakšić, Nenad; Lazary, Judit; Juhasz, Gabriella

2013-12-01

Prior research suggests that the Big Five personality dimensions might be associated with coping strategies as well as acute psychopathology. The aim of the present study was to investigate direct and indirect associations between the Big Five personality traits, coping styles, and psychopathological variables. Subjects were 1140 adults from various institutions and regions in Hungary. A comprehensive test battery was administered including the Big Five Inventory (BFI), Psychological Immune System Inventory (PISI), and some subscales of the Brief Symptom Inventory (BSI). Several moderation-mediation analyses were conducted using the PROCESS tool in SPSS to test for influence paths. Coping and personality variables jointly accounted for 40% to 50% of variance in psychopathology outcome. Personality dimensions of Extraversion, Conscientiousness and Emotional Stability had strongest predictive values. Emotional Stability had a more direct and unmediated effect, whereas Extraversion and Conscientiousness effects were mediated by the Approach and Self-regulation coping systems. In comparison to personality, coping style was generally a stronger predictor. The findings of this study might add to better understanding of complex pathways leading from broad personality dimensions to coping strategies and psychological (mal)adjustment.

Teaching light scattering spectroscopy: the dimension and shape of tobacco mosaic virus.

PubMed Central

Santos, N C; Castanho, M A

1996-01-01

The tobacco mosaic virus is used as a model molecular assembly to illustrate the basic potentialities of light scattering techniques (both static and dynamic) to undergraduates. The work has two objectives: a pedagogic one (introducing light scattering to undergraduate students) and a scientific one (stabilization of the virus molecular assembly structure by the nucleic acid). Students are first challenged to confirm the stabilization of the cylindrical shape of the virus by the nucleic acid, at pH and ionic strength conditions where the coat proteins alone do not self-assemble. The experimental intramolecular scattering factor is compared with the theoretical ones for several model geometries. The data clearly suggest that the geometry is, in fact, a rod. Comparing the experimental values of gyration radius and hydrodynamic radius with the theoretical expectations further confirms this conclusion. Moreover, the rod structure is maintained over a wider range of pH and ionic strength than that valid for the coat proteins alone. The experimental values of the diffusion coefficient and radius of gyration are compared with the theoretical expectations assuming the dimensions detected by electron microscopy techniques. In fact, both values are in agreement (length approximately 300 nm, radius approximately 20 nm). PMID:8874039

Servo-integrated patterned media by hybrid directed self-assembly.

PubMed

Xiao, Shuaigang; Yang, Xiaomin; Steiner, Philip; Hsu, Yautzong; Lee, Kim; Wago, Koichi; Kuo, David

2014-11-25

A hybrid directed self-assembly approach is developed to fabricate unprecedented servo-integrated bit-patterned media templates, by combining sphere-forming block copolymers with 5 teradot/in.(2) resolution capability, nanoimprint and optical lithography with overlay control. Nanoimprint generates prepatterns with different dimensions in the data field and servo field, respectively, and optical lithography controls the selective self-assembly process in either field. Two distinct directed self-assembly techniques, low-topography graphoepitaxy and high-topography graphoepitaxy, are elegantly integrated to create bit-patterned templates with flexible embedded servo information. Spinstand magnetic test at 1 teradot/in.(2) shows a low bit error rate of 10(-2.43), indicating fully functioning bit-patterned media and great potential of this approach for fabricating future ultra-high-density magnetic storage media.

Self-Assembly of Hierarchical DNA Nanotube Architectures with Well-Defined Geometries.

PubMed

Jorgenson, Tyler D; Mohammed, Abdul M; Agrawal, Deepak K; Schulman, Rebecca

2017-02-28

An essential motif for the assembly of biological materials such as actin at the scale of hundreds of nanometers and beyond is a network of one-dimensional fibers with well-defined geometry. Here, we demonstrate the programmed organization of DNA filaments into micron-scale architectures where component filaments are oriented at preprogrammed angles. We assemble L-, T-, and Y-shaped DNA origami junctions that nucleate two or three micron length DNA nanotubes at high yields. The angles between the nanotubes mirror the angles between the templates on the junctions, demonstrating that nanoscale structures can control precisely how micron-scale architectures form. The ability to precisely program filament orientation could allow the assembly of complex filament architectures in two and three dimensions, including circuit structures, bundles, and extended materials.

Synthesis and Self-Assembly of fcc Phase FePt Nanorods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Min; Pica, Timothy; Jiang, Ying-Bing

2007-05-01

In this paper, we report a synthesis of FePt nanorods by confining decomposition of Fe(CO) 5 and reduction of Pt(caca) 2 in surfactant reverse cylindrical micelles. The controlled nucleation and growth kinetics in confined environment allows easy control over Fe/Pt composition, nanorod uniformity, and nanorod aspect ratio. The FePt nanorods tend to self-assemble into ordered arrays along three-dimensions. Directed assembly under external magnetic field leads to two-dimensional ordered arrays, parallel to the substrate magnetic field. We expect that with optimized external magnetic fields, we should be able to assemble these nanorods into orientated one or two-dimensional arrays, providing a uniformmore » anisotropic magnetic platform for varied applications in enhanced data storage, magneto-electron transport, etc.« less

Attachment as Moderator of Treatment Outcome in Major Depression: A Randomized Control Trial of Interpersonal Psychotherapy versus Cognitive Behavior Therapy

ERIC Educational Resources Information Center

McBride, Carolina; Atkinson, Leslie; Quilty, Lena C.; Bagby, R. Michael

2006-01-01

Anxiety and avoidance dimensions of adult attachment insecurity were tested as moderators of treatment outcome for interpersonal psychotherapy (IPT) and cognitive-behavioral therapy (CBT). Fifty-six participants with major depression were randomly assigned to these treatment conditions. Beck Depression Inventory-II, Six-Item Hamilton Rating Scale…

Self-assembly of nucleic acids, silk and hybrid materials thereof.

PubMed

Humenik, Martin; Scheibel, Thomas

2014-12-17

Top-down approaches based on etching techniques have almost reached their limits in terms of dimension. Therefore, novel assembly strategies and types of nanomaterials are required to allow technological advances. Self-assembly processes independent of external energy sources and unlimited in dimensional scaling have become a very promising approach. Here,we highlight recent developments in self-assembled DNA-polymer, silk-polymer and silk-DNA hybrids as promising materials with biotic and abiotic moieties for constructing complex hierarchical materials in ‘bottom-up’ approaches. DNA block copolymers assemble into nanostructures typically exposing a DNA corona which allows functionalization, labeling and higher levels of organization due to its specific addressable recognition properties. In contrast, self-assembly of natural silk proteins as well as their recombinant variants yields mechanically stable β-sheet rich nanostructures. The combination of silk with abiotic polymers gains hybrid materials with new functionalities. Together, the precision of DNA hybridization and robustness of silk fibrillar structures combine in novel conjugates enable processing of higher-order structures with nanoscale architecture and programmable functions.

Self-assembly of nucleic acids, silk and hybrid materials thereof

NASA Astrophysics Data System (ADS)

Humenik, Martin; Scheibel, Thomas

2014-12-01

Top-down approaches based on etching techniques have almost reached their limits in terms of dimension. Therefore, novel assembly strategies and types of nanomaterials are required to allow technological advances. Self-assembly processes independent of external energy sources and unlimited in dimensional scaling have become a very promising approach. Here, we highlight recent developments in self-assembled DNA-polymer, silk-polymer and silk-DNA hybrids as promising materials with biotic and abiotic moieties for constructing complex hierarchical materials in ‘bottom-up’ approaches. DNA block copolymers assemble into nanostructures typically exposing a DNA corona which allows functionalization, labeling and higher levels of organization due to its specific addressable recognition properties. In contrast, self-assembly of natural silk proteins as well as their recombinant variants yields mechanically stable β-sheet rich nanostructures. The combination of silk with abiotic polymers gains hybrid materials with new functionalities. Together, the precision of DNA hybridization and robustness of silk fibrillar structures combine in novel conjugates enable processing of higher-order structures with nanoscale architecture and programmable functions.

Variable Selection for Support Vector Machines in Moderately High Dimensions

PubMed Central

Zhang, Xiang; Wu, Yichao; Wang, Lan; Li, Runze

2015-01-01

Summary The support vector machine (SVM) is a powerful binary classification tool with high accuracy and great flexibility. It has achieved great success, but its performance can be seriously impaired if many redundant covariates are included. Some efforts have been devoted to studying variable selection for SVMs, but asymptotic properties, such as variable selection consistency, are largely unknown when the number of predictors diverges to infinity. In this work, we establish a unified theory for a general class of nonconvex penalized SVMs. We first prove that in ultra-high dimensions, there exists one local minimizer to the objective function of nonconvex penalized SVMs possessing the desired oracle property. We further address the problem of nonunique local minimizers by showing that the local linear approximation algorithm is guaranteed to converge to the oracle estimator even in the ultra-high dimensional setting if an appropriate initial estimator is available. This condition on initial estimator is verified to be automatically valid as long as the dimensions are moderately high. Numerical examples provide supportive evidence. PMID:26778916

The moderating role of ethnicity in the relation between religiousness and mental health among ethnically diverse college students.

PubMed

Cokley, Kevin; Garcia, Daniel; Hall-Clark, Brittany; Tran, Kimberly; Rangel, Azucena

2012-09-01

Many studies have documented the links between dimensions of religiousness with mental health (e.g., Hackney and Sanders 2003; Mofidi et al. 2006). However, very little is known about whether these links differ across ethnic groups. This study examined the contribution of dimensions of religiousness to the prediction of mental health in an ethnically diverse sample of 413 college students (167 European Americans, 83 African Americans, 81 Asian Americans, and 82 Latino Americans). Results indicated significant ethnic differences across dimensions of religiousness. African Americans were significantly higher on religious engagement and religious conservatism than the other ethnic groups and significantly lower on religious struggle than European Americans. Moderated multiple regressions revealed that increases in religious struggle was associated with poorer mental health for African Americans and Latino Americans, while increases in religious engagement and ecumenical worldview were associated with better mental health for African Americans. The findings indicate that ethnicity is an important factor to consider when examining the link between religiousness and mental health.

Assembly Modulated by Particle Position and Shape: A New Concept in Self-Assembly.

PubMed

Tavacoli, Joe W; Heuvingh, Julien; Du Roure, Olivia

2017-11-10

In this communication we outline how the bespoke arrangements and design of micron-sized superparamagnetic shapes provide levers to modulate their assembly under homogeneous magnetic fields. We label this new approach, 'assembly modulated by particle position and shape' (APPS). Specifically, using rectangular lattices of superparamagnetic micron-sized cuboids, we construct distinct microstructures by adjusting lattice pitch and angle of array with respect to a magnetic field. Broadly, we find two modes of assembly: (1) immediate 2D jamming of the cuboids as they rotate to align with the applied field (rotation-induced jamming) and (2) aggregation via translation after their full alignment (dipole-dipole assembly). The boundary between these two assembly pathways is independent on field strength being solely a function of the cuboid's dimensions, lattice pitch, and array angle with respect to field-a relationship which we capture, along with other features of the assembly process, in a 'phase diagram'. In doing so, we set out initial design rules to build custom made assemblies. Moreover, these assemblies can be made flexible thanks to the hinged contacts of their particle building blocks. This flexibility, combined with the superparamagnetic nature of the architectures, renders our assembly method particularly appropriate for the construction of complex actuators at a scale hitherto not possible.

Progress in Chile in the development of the fission {sup 99}Mo production using modified CINTICHEM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schrader, R.; Klein, J.; Medel, J.

2008-07-15

Fission {sup 99}Mo will be produced in Chile irradiating low-enriched uranium (LEU) foil in a MTR research reactor. For the purpose of developing the capability to fabricate the target, which is done of uranium foil enclosed in swaged concentric aluminum tubes, dummy targets are being fabricated using 130 {mu}m copper foil instead of the uranium foil, wrapped in a 14{mu}m nickel fission-recoil barrier. Dummy targets using several dimensions of copper foil have been assembled; however, the emphasis is being set in targets fabricated using the dimensions of the LEU foil that KAERI will provide, i.e. 50 mm x 100mm xmore » 0.130 mm. The assembling of target using the last dimensions has not been free of difficulties. Neutronic calculations and preliminary thermal and fluid analyses were performed to estimate the fission products activity and the heat removal capability for a 13 grams LEU-foil annular target, which will be irradiated in the RECH-1 research reactor at the level power of 5 MW during 48 hours. In a fume hood, Cintichem processing of natural uranium shavings with the addition of different carriers were performed, obtaining recovery over 90% of the added Mo carrier. Expertise has been gained in (a) foil dissolution process in a dissolver locally designed, (b) in Mo precipitation process, and (c) preparation of the purification columns with AgC, C and HZrO. Additionally, the irradiated target cutting machine with an innovative design was finally assembled. (author)« less

Segmented tubular cushion springs and spring assembly

NASA Technical Reports Server (NTRS)

Haslim, L. A. (Inventor)

1985-01-01

A spring which includes a tube with an elliptical cross section, with the greater axial dimension extending laterally and the lesser axial dimension extending vertically is disclosed. A plurality of cuts in the form of slots passing through most of a wall of the tube extend perpendiculary to a longitudinal axis extending along the tube. An uncut portion of the tube wall extends along the tube for bonding or fastening the tube to a suitable base, such as a bottom of a seat cushion.

Serum Brain-derived neurotrophic factor (BDNF): the severity and symptomatic dimensions of depression.

PubMed

Jevtović, Saša; Karlović, Dalibor; Mihaljević-Peleš, Alma; Šerić, Vesna; Vrkić, Nada; Jakšić, Nenad

2011-12-01

The aim of this study was to compare the concentration of serum Brain-derived neurotrophic factor (BDNF) in patients suffering from major depressive disorder (MDD) considering the severity of MDD episode defined by the Hamilton rating scale for depression (HAMD-17). The other aim was to research the connection between serum BDNF and the symptomatic dimensions of MDD. The study includes 139 participants with major depressive disorder (MDD). Diagnosis of MDD was set by DSM-IV-TR criteria. The severity of MDD was estimated with HAM-D-17 in the manner that mild episode was diagnosed if the score on HAMD-17 was up to 18, moderately severe 18-25 and severe over 25. Concentration of BDNF was determined by the ELISA method. This research could not find a difference in BDNF concentration considering the severity of the depressive disorder in groups suffering from mild, moderately severe and severe episodes of MDD (F=1.816; p=0.169). Factor analysis of HAMD-17 extracted four dimensions of depressive symptoms. None of the symptomatic dimensions was significantly related to BDNF concentration. Results of this study indicate that serum BDNF levels are not related to the severity of depression and its specific symptomatic dimensions. These findings support the idea of a complex relationship between BDNF concentration at the periphery and in the CNS.

Jack Rabbit Pretest Shadowplate Drawings For TATB IHE Model Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, M M; McDaniel, D W

The Jack Rabbit Pretest (PT) series consisted of 5 focused hydrodynamic experiments 2021E PT3, PT4, PT5, PT6, and PT7. They were fired in March and April of 2008 at the Contained Firing Facility, Site 300, Lawrence Livermore National Laboratory, Livermore, California. These experiments measured deadzone formation and impulse gradients created during the detonation of TATB based insensitive high explosive. When setting up computer simulations of the Jack Rabbit Pretest series, the modeler or code developer can execute simulations with increasing degrees of refinement using detail found in the shadowplate design. The easiest way to get started is by treating themore » shadowplate in each experiment as a monolithic homogeneous piece of stainless steel. The simulation of detonation would begin as a point initiation below the center, bottom surface of the shadowplate. The detonation running through the ultrafine TATB booster can be simulated using program burn and then switched over to a reactive flow detonation model as the detonation front crosses the boundary into the main charge LX-17 IHE. A modeler wanting to further refine the simulation and progression of shock through the shadowplate can use the more detailed shadowplate design information presented in this document. The source drawings are included in Appendix A of this document. Their titles and drawing numbers are listed. Each experiment's shadowplate consists of two major components. A 303 stainless steel shape that defines the outer dimensions of shadowplate and a cylindrical 303 stainless steel detonator housing that is located in a closely machined pocket in the shape. The SIMPLE ASSY drawing accurately represents the dimensions of the outer shape, it's machined cylindrical pocket, and detonator body which is treated as a monolithic, homogeneous piece of stainless steel. The detonator body cross section shows an accurately dimensioned void where the slapper flyer barrel, LX-16 (pressed PETN) pellet, and pellet can flyer barrel are located. The FULL ASSY drawing accurately represents the dimensions of the outer shadowplate shape and it's machined pocket. The detonator dimensions and materials are detailed in cross section and exploded view. All diameters, thicknesses, and materials are called out in the drawing. You will notice that the detonator includes a multilayer slapper assembly with two layers of electrically insulating Kapton sandwiching the copper foil bridge circuit. The Kapton insulated circuit is sandwiched between two thin stainless steel sheets. This slapper assembly is secured to the detonator body with two screws. There is a 0.25 mm gap between the slapper assembly and the outer shadowplate shape. The stainless steel detonator body contains an off-center titanium wheel. This titanium wheel is secured to the detonator body with one screw and two pins to maintain position and orientation of the pellet can assembly in the center of the detonator body. The titanium wheel contains a tantalum/tungsten washer and pellet can assembly. The pellet can assembly consists of a pressed LX-16 initiator pellet contained in an extruded aluminum foil can. It may be useful for the modeler to include some of the details of the shadowplate and detonator design to further refine simulations of the Jack Rabbit Pretest experiments. These details may be relevant to the progression of shock originating from the PETN initiation pellet and ultrafine TATB booster that propagates through the shadowplate.« less

Self-assembling DNA nanotubes to connect molecular landmarks

NASA Astrophysics Data System (ADS)

Mohammed, Abdul M.; Šulc, Petr; Zenk, John; Schulman, Rebecca

2017-05-01

Within cells, nanostructures are often organized using local assembly rules that produce long-range order. Because these rules can take into account the cell's current structure and state, they can enable complexes, organelles or cytoskeletal structures to assemble around existing cellular components to form architectures. Although many methods for self-assembling biomolecular nanostructures have been developed, few can be programmed to assemble structures whose form depends on the identity and organization of structures already present in the environment. Here, we demonstrate that DNA nanotubes can grow to connect pairs of molecular landmarks with different separation distances and relative orientations. DNA tile nanotubes nucleate at these landmarks and grow while their free ends diffuse. The nanotubes can then join end to end to form stable connections, with unconnected nanotubes selectively melted away. Connections form between landmark pairs separated by 1-10 µm in more than 75% of cases and can span a surface or three dimensions. This point-to-point assembly process illustrates how self-assembly kinetics can be designed to produce structures with a desired physical property rather than a specific shape.

The relationship between nurses’ clinical competence and burnout in neonatal intensive care units

PubMed Central

Soroush, Fatemehzahra; Zargham-Boroujeni, Ali; Namnabati, Mahboobeh

2016-01-01

Background: Nurses’ clinical competency plays an important role in the care of preterm infants. On the other hand, burnout is one of the most important factors in reducing the nurses’ efficiency. With regard to the importance of the role of nurses, and the vulnerability of the infants, the purpose of this study was to investigate the relationship between nurses’ burnout and clinical competency in NICUs. Materials and Methods: The descriptive cross-sectional study was conducted with the participation of 86 nurses working in the NICUs of hospitals in Isfahan, Iran. Census sampling method was used in the NICUs of educational hospitals in 2014. Data were collected by a questionnaire including demographic characteristics, Patricia clinical competency, and Maslach burnout scales. Data were analyzed by the statistical tests of independent t-test and Pearson correlations test with the significance level of α < 0.05. Results: Six dimensions of clinical competency and three dimensions of nurses’ burnout were assessed at three levels (weak, moderate, and strong levels). Statistical tests showed that clinical competency was at a moderate level in all fields. Of the dimensions of nurses’ burnout, emotional exhaustion was moderate, depersonalization was weak, and personal performance was strong. The results showed that nurses’ burnout and clinical competency in the NICUs were at a moderate level and had a significant negative relationship (r = −0.322, P = 0.003). Conclusions: Results showed that burnout had a negative relationship with competency. Therefore, managers are suggested to improve nurses’ competency and diminish their job burnout through better and more applicable planning. PMID:27563328

Food Choice Motives When Purchasing in Organic and Conventional Consumer Clusters: Focus on Sustainable Concerns (The NutriNet-Santé Cohort Study)

PubMed Central

Baudry, Julia; Péneau, Sandrine; Allès, Benjamin; Touvier, Mathilde; Hercberg, Serge; Galan, Pilar; Amiot, Marie-Josèphe; Lairon, Denis; Méjean, Caroline; Kesse-Guyot, Emmanuelle

2017-01-01

The purpose of this study was to examine food choice motives associated with various organic and conventional dietary patterns among 22,366 participants of the NutriNet-Santé study. Dietary intakes were estimated using a food frequency questionnaire. Food choice motives were assessed using a validated 63-item-questionnaire gathered into nine food choice motive dimension scores: “absence of contaminants”, “avoidance for environmental reasons”, “ethics and environment”, “taste”, “innovation”, “local and traditional production”, “price”, “health” and “convenience”. Five consumers’ clusters were identified: “standard conventional food small eaters”, “unhealthy conventional food big eaters”, “standard organic food small eaters”, “green organic food eaters” and “hedonist moderate organic food eaters”. Relationships between food choice motive dimension scores and consumers’ clusters were assessed using analysis of covariance (ANCOVA) models adjusted for sociodemographic factors. “Green organic food eaters” had the highest mean score for the “health” dimension, while “unhealthy conventional food big eaters” obtained the lowest mean score for the “absence of contaminants” dimension. “Standard organic food small eaters”, “green organic food eaters” and “hedonist moderate organic food eaters” had comparable scores for the “taste” dimension. “Unhealthy conventional food big eaters” had the highest mean score for the “price” dimension while “green organic food eaters” had the lowest mean scores for the “innovation” and “convenience” dimensions. These results provide new insights into the food choice motives of diverse consumers’ profiles including “green” and “hedonist” eaters. PMID:28125035

Lab meets real life: A laboratory assessment of spontaneous thought and its ecological validity

PubMed Central

Welz, Annett; Reinhard, Iris; Alpers, Georg W.

2017-01-01

People’s minds frequently wander towards self-generated thoughts, which are unrelated to external stimuli or demands. These phenomena, referred to as “spontaneous thought” (ST) and “mind wandering” (MW), have previously been linked with both costs and benefits. Current assessments of ST and MW have predominantly been conducted in the laboratory, whereas studies on the ecological validity of such lab-related constructs and their interrelations are rare. The current study examined the stability of ST dimensions assessed in the lab and their predictive value with respect to MW, repetitive negative thought (uncontrollable rumination, RUM), and affect in daily life. Forty-three university students were assessed with the Amsterdam Resting State Questionnaire (2nd version) to assess ten ST dimensions during the resting state in two laboratory sessions, which were separated by five days of electronic ambulatory assessment (AA). During AA, individuals indicated the intensity of MW and RUM, as well as of positive and negative affect in daily life ten times a day. ST dimensions measured in the lab were moderately stable across one week. Five out of ten ST lab dimensions were predicted by mental health-related symptoms or by dispositional cognitive traits. Hierarchical linear models revealed that a number of ST lab dimensions predicted cognitive and affective states in daily life. Mediation analyses showed that RUM, but not MW per se, accounted for the relationship between specific ST lab dimensions and mood in daily life. By using a simple resting state task, we could demonstrate that a number of lab dimensions of spontaneous thought are moderately stable, are predicted by mental health symptoms and cognitive traits, and show plausible associations with categories of self-generated thought and mood in daily life. PMID:28910351

Optomechanical design concept for GMACS: a wide-field multi-object moderate resolution optical spectrograph for the Giant Magellan Telescope (GMT)

NASA Astrophysics Data System (ADS)

Smee, Stephen A.; Prochaska, Travis; Shectman, Stephen A.; Hammond, Randolph P.; Barkhouser, Robert H.; DePoy, D. L.; Marshall, J. L.

2012-09-01

We describe the conceptual optomechanical design for GMACS, a wide-field, multi-object, moderate-resolution optical spectrograph for the Giant Magellan Telescope (GMT). GMACS is a candidate first-light instrument for the GMT and will be one of several instruments housed in the Gregorian Instrument Rotator (GIR) located at the Gregorian focus. The instrument samples a 9 arcminute x 18 arcminute field of view providing two resolution modes (i.e, low resolution, R ~ 2000, and moderate resolution, R ~ 4000) over a 3700 Å to 10200 Å wavelength range. To minimize the size of the optics, four fold mirrors at the GMT focal plane redirect the full field into four individual "arms", that each comprises a double spectrograph with a red and blue channel. Hence, each arm samples a 4.5 arcminute x 9 arcminute field of view. The optical layout naturally leads to three separate optomechanical assemblies: a focal plane assembly, and two identical optics modules. The focal plane assembly contains the last element of the telescope's wide-field corrector, slit-mask, tent-mirror assembly, and slit-mask magazine. Each of the two optics modules supports two of the four instrument arms and houses the aft-optics (i.e. collimators, dichroics, gratings, and cameras). A grating exchange mechanism, and articulated gratings and cameras facilitate multiple resolution modes. In this paper we describe the details of the GMACS optomechanical design, including the requirements and considerations leading to the design, mechanism details, optics mounts, and predicted flexure performance.

Epistemic uncertainty propagation in energy flows between structural vibrating systems

NASA Astrophysics Data System (ADS)

Xu, Menghui; Du, Xiaoping; Qiu, Zhiping; Wang, Chong

2016-03-01

A dimension-wise method for predicting fuzzy energy flows between structural vibrating systems coupled by joints with epistemic uncertainties is established. Based on its Legendre polynomial approximation at α=0, both the minimum and maximum point vectors of the energy flow of interest are calculated dimension by dimension within the space spanned by the interval parameters determined by fuzzy those at α=0 and the resulted interval bounds are used to assemble the concerned fuzzy energy flows. Besides the proposed method, vertex method as well as two current methods is also applied. Comparisons among results by different methods are accomplished by two numerical examples and the accuracy of all methods is simultaneously verified by Monte Carlo simulation.

Joining Forces: Integrating Proteomics and Cross-linking with the Mass Spectrometry of Intact Complexes*

PubMed Central

Stengel, Florian; Aebersold, Ruedi; Robinson, Carol V.

2012-01-01

Protein assemblies are critical for cellular function and understanding their physical organization is the key aim of structural biology. However, applying conventional structural biology approaches is challenging for transient, dynamic, or polydisperse assemblies. There is therefore a growing demand for hybrid technologies that are able to complement classical structural biology methods and thereby broaden our arsenal for the study of these important complexes. Exciting new developments in the field of mass spectrometry and proteomics have added a new dimension to the study of protein-protein interactions and protein complex architecture. In this review, we focus on how complementary mass spectrometry-based techniques can greatly facilitate structural understanding of protein assemblies. PMID:22180098

Predicting suicide ideation through intrapersonal and interpersonal factors: The interplay of Big-Five personality traits and social support.

PubMed

Ayub, Nailah

2015-11-01

While a specific personality trait may escalate suicide ideation, contextual factors such as social support, when provided effectively, may alleviate the effects of such personality traits. This study examined the moderating role of social support in the relationship between the Big-Five personality traits and suicide ideation. Significant interactions were found between social support and extraversion and emotional stability. Specifically, the relationship between emotional stability and extraversion to suicide ideation was exacerbated when social support was low. Slope analysis showed openness also interacted with low social support. Results were computed for frequency, duration and attitude dimensions of suicide ideation. Extraversion interacted with social support to predict all three dimensions. Social support moderated emotional stability to predict frequency and duration, moderated conscientiousness towards frequency and attitude, and moderated openness towards attitude. The results imply that whereas personality traits may be difficult to alter, social support may play a significant role in saving a life. Psychologists should include family and friends when treating a suicidal youth, guiding them to awareness of one's personality and being more supportive. Copyright © 2015 John Wiley & Sons, Ltd.

The moderator role of emotion regulation ability in the link between stress and well-being

PubMed Central

Extremera, Natalio; Rey, Lourdes

2015-01-01

This article examined the moderating role of a central core dimension of emotional intelligence—emotion-regulation ability—in the relationship between perceived stress and indicators of well-being (depression and subjective happiness) in a sample from a community adult population. The relationships for males and females on these dimensions were also compared. Results revealed that emotion-regulation abilities moderated both the association between perceived stress and depression/happiness for the total sample. However, a gender-specific analysis showed that the moderation effect was only significant for males. In short, when males reported a high level of perceived stress, those with high scores in regulating emotions reported higher scores in subjective happiness and lower depression symptoms than those with low regulating emotions. However, no interaction effect of regulating emotions and stress for predicting subjective happiness and depression was found for females. In developing stress management programmes for reducing depression and increasing well-being, these findings suggest that training in emotional regulation may be more beneficial for males than females. Our findings are discussed in terms of the need for future research to understand the different gender associations and to consider these differences in further intervention programmes. PMID:26579017

Stomaching rejection: Self-compassion and self-esteem moderate the impact of daily social rejection on restrictive eating behaviours among college women.

PubMed

Beekman, Janine B; Stock, Michelle L; Howe, George W

2017-11-01

The present study examined whether having high self-esteem or a self-compassionate perspective help mitigate the impact of daily social rejection on negative affect and restrictive eating behaviours. Following a baseline survey assessing self-esteem and self-compassion, 121 college women completed online daily diaries for one week. Negative affect and restrictive eating behaviours. On days when women reported more rejection, they also reported higher restrictive eating behaviours and greater negative affect. Effects were moderated by self-esteem and self-compassion, such that the lower participants were in self-esteem or self-compassion, the stronger the positive relation between rejection and negative affect and restrictive eating. However, only the common humanity/isolation dimension of self-compassion significantly moderated daily effects of rejection when controlling for self-esteem. Mediated moderation results reveal different mechanisms by which self-esteem and self-compassion buffer against rejections' effects on affect and restrictive eating. Self-compassion and self-esteem influence the complex impact that social rejection has on affect and restrictive eating. More than other dimensions of self-compassion or self-esteem, remembering one's common humanity can result in a healthier response to social rejection.

How are social capital and sense of coherence associated with hazardous alcohol use? Findings from a large population-based Swedish sample of adults.

PubMed

Larm, Peter; Åslund, Cecilia; Starrin, Bengt; Nilsson, K W

2016-07-01

This study examined whether social capital and a sense of coherence are associated with hazardous alcohol use in a large population-based Swedish sample. In particular, the objectives were (a) to examine which of five subdimensions of social capital is associated with hazardous alcohol use, (b) to investigate the moderating role of sense of coherence and (c) to examine possible sex differences. A postal survey was distributed to a sample of respondents (aged 18-84 years) from five Swedish counties that was stratified by sex, age and city; 40,674 (59.2%) participants responded, of which 45.5% were men and 54.5% were women with a mean±SD age of 53.8±17.9 years. Structural dimensions of social capital were associated with an increased probability of hazardous alcohol use among both men and women, whereas the increased probability associated with cognitive dimensions occurred mostly among women. Sense of coherence was robustly associated with a decreased probability of hazardous alcohol use among both men and women. There were few moderating effects of sense of coherence and sex differences emerged mainly for the cognitive dimension of social capital. CONCLUSIONS ASSOCIATIONS BETWEEN SOCIAL CAPITAL DIMENSIONS AND HAZARDOUS ALCOHOL USE WERE PARTLY SEX-SPECIFIC, WHEREAS THE BENEFITS OF A SENSE OF COHERENCE ACCRUED TO BOTH SEXES SOCIAL CAPITAL DIMENSIONS AND SENSE OF COHERENCE WERE GENERALLY UNRELATED TO EACH OTHER ONLY ASSOCIATIONS BETWEEN THE COGNITIVE DIMENSIONS OF SOCIAL CAPITAL AND HAZARDOUS ALCOHOL USE DIFFERED BY SEX. © 2016 the Nordic Societies of Public Health.

Acoustic transducer

DOEpatents

Drumheller, Douglas S.

2000-01-01

An active acoustic transducer tool for use down-hole applications. The tool includes a single cylindrical mandrel including a shoulder defining the boundary of a narrowed portion over which is placed a sandwich-style piezoelectric tranducer assembly. The piezoelectric transducer assembly is prestressed by being placed in a thermal interference fit between the shoulder of the mandrel and the base of an anvil which is likewise positioned over the narrower portion of the mandrel. In the preferred embodiment, assembly of the tool is accomplished using a hydraulic jack to stretch the mandrel prior to emplacement of the cylindrical sandwich-style piezoelectric transducer assembly and anvil. After those elements are positioned and secured, the stretched mandrel is allowed to return substantially to its original (pre-stretch) dimensions with the result that the piezoelectric transducer elements are compressed between the anvil and the shoulder of the mandrel.

Photo-Responsive Soft Ionic Crystals: Ion-Pairing Assemblies of Azobenzene Carboxylates.

PubMed

Yamakado, Ryohei; Hara, Mitsuo; Nagano, Shusaku; Seki, Takahiro; Maeda, Hiromitsu

2017-07-12

This report delineates the design and synthesis of negatively charged azobenzene derivatives that form photo-responsive ion-pairing assemblies. The azobenzene carboxylates possessing aliphatic chains were prepared as photo-responsive anions that promote the formation of ion-pairing dimension-controlled assemblies, including mesophases, when used in conjunction with a tetrabutylammonium (TBA) cation. The photo-responsive properties of the ion pairs and the precursory carboxylic acids in the bulk state were examined by polarized optical microscopy (POM) and X-ray diffraction (XRD), demonstrating that liquid crystal (LC)-liquid and crystal-liquid phase transitions occurred, depending on the number and lengths of the aliphatic chains of each assembly. An ion pair exhibited photo-induced crystal-crystal phase transitions upon switching between two irradiation wavelengths (365/436 nm). © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bi cluster-assembled interconnects produced using SU8 templates

NASA Astrophysics Data System (ADS)

Partridge, J. G.; Matthewson, T.; Brown, S. A.

2007-04-01

Bi clusters with an average diameter of 25 nm have been deposited from an inert gas aggregation source and assembled into thin-film interconnects which are formed between planar electrical contacts and supported on Si substrates passivated with Si3N4 or thermally grown oxide. A layer of SU8 (a negative photoresist based on EPON SU-8 epoxy resin) is patterned using optical or electron-beam lithography, and it defines the position and dimensions of the cluster film. The conduction between the contacts is monitored throughout the deposition/assembly process, and subsequent I(V) characterization is performed in situ. Bi cluster-assembled interconnects have been fabricated with nanoscale widths and with up to 1:1 thickness:width aspect ratios. The conductivity of these interconnects has been increased, post-deposition, using a simple thermal annealing process.

Chirality controlled responsive self-assembled nanotubes in water† †Electronic supplementary information (ESI) available: Detailed experimental procedures and analyses, UV-vis absorption and CD spectroscopy, cryo-TEM and widefield microscopy. See DOI: 10.1039/c6sc02935c Click here for additional data file.

PubMed Central

van Dijken, D. J.; Štacko, P.; Stuart, M. C. A.; Browne, W. R.

2017-01-01

The concept of using chirality to dictate dimensions and to store chiral information in self-assembled nanotubes in a fully controlled manner is presented. We report a photoresponsive amphiphile that co-assembles with its chiral counterpart to form nanotubes and demonstrate how chirality can be used to effect the formation of either micrometer long, achiral nanotubes or shorter (∼300 nm) chiral nanotubes that are bundled. The nature of these assemblies is studied using a variety of spectroscopic and microscopic techniques and it is shown that the tubes can be disassembled with light, thereby allowing the chiral information to be erased. PMID:28451300

Hopper apparatuses for processing a bulk solid, and related systems and methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Westover, Tyler Lott; Ryan, John Chadron Benjamin; Matthews, Austin Colter

A hopper apparatus comprises a movable wall comprising opposing walls movably connected to a support assembly and oriented at acute angles relative to a central vertical axis of the support assembly, and movement control devices configured and positioned to move the opposing walls along the support assembly to control dimensions of a discharge outlet at least partially defined by converging ends of the opposing walls; a liner assembly comprising liner structures at least partially overlying inner surfaces of the opposing walls and configured to remain at least partially stationary relative to the opposing walls during movement of the opposing walls;more » and pressure sensors between the inner surfaces of opposing walls and portions of the liner structures thereover. A bulk solids processing system and a method of processing a bulk solid are also described.« less

Continuity tester screens out faulty socket connections

NASA Technical Reports Server (NTRS)

Golding, G.

1964-01-01

A device, used before and after assembly, tests the continuity of an electrical circuit through each pin and socket of multiple connector sockets. Electrically insulated except at the contact area, a test probe is dimensioned to make contact only in properly formed sockets.

Tandem steerable running gear

NASA Technical Reports Server (NTRS)

Fincannon, O. J.; Glenn, D. L.

1972-01-01

Characteristics of steering assembly for vehicle designed to move large components of space flight vehicles are presented. Design makes it possible to move heavy and bulky items through narrow passageways with tight turns. Typical configuration is illustrated to show dimensions of turning radius and minimum distances involved.

Bridging Multidimensional Models of Ethnic-Racial and Gender Identity Among Ethnically Diverse Emerging Adults.

PubMed

Wilson, Antoinette R; Leaper, Campbell

2016-08-01

The purpose of this study was to integrate and validate a multidimensional model of ethnic-racial identity and gender identity borrowing constructs and measures based on social identity and gender identity theories. Participants included 662 emerging adults (M age  = 19.86 years; 75 % female) who self-identified either as Asian American, Latino/a, or White European American. We assessed the following facets separately for ethnic-racial identity and gender identity: centrality, in-group affect, in-group ties, self-perceived typicality, and felt conformity pressure. Within each identity domain (gender or ethnicity/race), the five dimensions generally indicated small-to-moderate correlations with one another. Also, correlations between domains for each dimension (e.g., gender typicality and ethnic-racial typicality) were mostly moderate in magnitude. We also noted some group variations based on participants' ethnicity/race and gender in how strongly particular dimensions were associated with self-esteem. Finally, participants who scored positively on identity dimensions for both gender and ethnic-racial domains indicated higher self-esteem than those who scored high in only one domain or low in both domains. We recommend the application of multidimensional models to study social identities in multiple domains as they may relate to various outcomes during development.

Motivational Basis of Personality Traits: A Meta-Analysis of Value-Personality Correlations.

PubMed

Fischer, Ronald; Boer, Diana

2015-10-01

We investigated the relationships between personality traits and basic value dimensions. Furthermore, we developed novel country-level hypotheses predicting that contextual threat moderates value-personality trait relationships. We conducted a three-level v-known meta-analysis of correlations between Big Five traits and Schwartz's (1992) 10 values involving 9,935 participants from 14 countries. Variations in contextual threat (measured as resource threat, ecological threat, and restrictive social institutions) were used as country-level moderator variables. We found systematic relationships between Big Five traits and human values that varied across contexts. Overall, correlations between Openness traits and the Conservation value dimension and Agreeableness traits and the Transcendence value dimension were strongest across all samples. Correlations between values and all personality traits (except Extraversion) were weaker in contexts with greater financial, ecological, and social threats. In contrast, stronger personality-value links are typically found in contexts with low financial and ecological threats and more democratic institutions and permissive social context. These effects explained on average more than 10% of the variability in value-personality correlations. Our results provide strong support for systematic linkages between personality and broad value dimensions, but they also point out that these relations are shaped by contextual factors. © 2014 Wiley Periodicals, Inc.

Measuring Contextual Characteristics for Community Health

PubMed Central

Hillemeier, Marianne M; Lynch, John; Harper, Sam; Casper, Michele

2003-01-01

Objective To conceptualize and measure community contextual influences on population health and health disparities. Data Sources We use traditional and nontraditional secondary sources of data comprising a comprehensive array of community characteristics. Study Design Using a consultative process, we identify 12 overarching dimensions of contextual characteristics that may affect community health, as well as specific subcomponents relating to each dimension. Data Collection An extensive geocoded library of data indicators relating to each dimension and subcomponent for metropolitan areas in the United States is assembled. Principal Findings We describe the development of community contextual health profiles, present the rationale supporting each of the profile dimensions, and provide examples of relevant data sources. Conclusions Our conceptual framework for community contextual characteristics, including a specified set of dimensions and components, can provide practical ways to monitor health-related aspects of the economic, social, and physical environments in which people live. We suggest several guiding principles useful for understanding how aspects of contextual characteristics can affect health and health disparities. PMID:14727793

Neuroticism as a Moderator of Direct and Mediated Relationships Between Introversion-Extraversion and Well-Being

PubMed Central

Fadda, Daniela; Scalas, L. Francesca

2016-01-01

Among personality traits, extraversion has received major theoretical and empirical attention as predictor of subjective well-being (SWB), whereas the role of emotional stability-neuroticism has been partially neglected. The present study aims to study the role of neuroticism in the relationship between introversion-extraversion and SWB. In particular, we explored if the trait of neuroticism moderates the relationships between introversion-extraversion and SWB dimensions (Satisfaction with life, Mastery, Vigour, Social Cheerfulness), directly and by mediation of self-esteem. Indeed, previous studies have suggested that self-esteem is positively associated with high extraversion and low neuroticism and that it positively mediates the relationship between SWB and personality traits in adolescents. For this purpose, a sample of high school students (N = 1173) completed the Oxford Happiness Inventory, the Rosenberg Self-Esteem Scale and the Big Five Questionnaire. In a latent variable model, we examined the interaction effects (direct and indirect) of extraversion and neuroticism on SWB dimensions. Our results showed that the nature of differences between introverts and extraverts on SWB could be related to the level of neuroticism in relation to Satisfaction with life. Moreover, self-esteem mediated the relationship between personality traits and SWB. In particular, mediated moderation effect analysis showed that self-esteem mediates completely the relationship between the interaction term (extraversion x neuroticism) and Mastery, and partially the relationship with Satisfaction with life. Moreover, moderated mediation effect analysis showed that high levels of neuroticism moderate the effect of extraversion on Satisfaction with life and Mastery through the mediation of self-esteem. In conclusion, our results suggest that although extraversion has a cardinal role on SWB dimensions related to Vigour and Social Cheerfulness, neuroticism and the mediating role of self-esteem should more properly considered in relation to Satisfaction with life and Mastery. PMID:27247693

Segmented tubular cushion springs and spring assembly

NASA Technical Reports Server (NTRS)

Haslim, Leonard A. (Inventor)

1988-01-01

A spring (10) includes a tube (12) having an elliptical cross section, with the greater axial dimension (22) extending laterally and the lesser axial dimension (24) extending vertically. A plurality of cuts (20) in the form of slots passing through most of a wall of the tube (12) extend perpendicularly to a longitudinal axis (16) extending along the tube (12). An uncut portion (26) of the tube wall extends along the tube (12) for bonding or fastening the tube to a suitable base, such as a bottom (28) of a seat cushion (30).

Fabrication of high gradient insulators by stack compression

DOEpatents

Harris, John Richardson; Sanders, Dave; Hawkins, Steven Anthony; Norona, Marcelo

2014-04-29

Individual layers of a high gradient insulator (HGI) are first pre-cut to their final dimensions. The pre-cut layers are then stacked to form an assembly that is subsequently pressed into an HGI unit with the desired dimension. The individual layers are stacked, and alignment is maintained, using a sacrificial alignment tube that is removed after the stack is hot pressed. The HGI's are used as high voltage vacuum insulators in energy storage and transmission structures or devices, e.g. in particle accelerators and pulsed power systems.

New self-assembly strategies for next generation lithography

NASA Astrophysics Data System (ADS)

Schwartz, Evan L.; Bosworth, Joan K.; Paik, Marvin Y.; Ober, Christopher K.

2010-04-01

Future demands of the semiconductor industry call for robust patterning strategies for critical dimensions below twenty nanometers. The self assembly of block copolymers stands out as a promising, potentially lower cost alternative to other technologies such as e-beam or nanoimprint lithography. One approach is to use block copolymers that can be lithographically patterned by incorporating a negative-tone photoresist as the majority (matrix) phase of the block copolymer, paired with photoacid generator and a crosslinker moiety. In this system, poly(α-methylstyrene-block-hydroxystyrene)(PαMS-b-PHOST), the block copolymer is spin-coated as a thin film, processed to a desired microdomain orientation with long-range order, and then photopatterned. Therefore, selfassembly of the block copolymer only occurs in select areas due to the crosslinking of the matrix phase, and the minority phase polymer can be removed to produce a nanoporous template. Using bulk TEM analysis, we demonstrate how the critical dimension of this block copolymer is shown to scale with polymer molecular weight using a simple power law relation. Enthalpic interactions such as hydrogen bonding are used to blend inorganic additives in order to enhance the etch resistance of the PHOST block. We demonstrate how lithographically patternable block copolymers might fit in to future processing strategies to produce etch-resistant self-assembled features at length scales impossible with conventional lithography.

A simple approach to characterizing block copolymer assemblies: graphene oxide supports for high contrast multi-technique imaging†

PubMed Central

Patterson, Joseph P.; Sanchez, Ana M.; Petzetakis, Nikos; Smart, Thomas P.; Epps, Thomas H.; Portman, Ian

2013-01-01

Block copolymers are well-known to self-assemble into a range of 3-dimensional morphologies. However, due to their nanoscale dimensions, resolving their exact structure can be a challenge. Transmission electron microscopy (TEM) is a powerful technique for achieving this, but for polymeric assemblies chemical fixing/staining techniques are usually required to increase image contrast and protect specimens from electron beam damage. Graphene oxide (GO) is a robust, water-dispersable, and nearly electron transparent membrane: an ideal support for TEM. We show that when using GO supports no stains are required to acquire high contrast TEM images and that the specimens remain stable under the electron beam for long periods, allowing sample analysis by a range of electron microscopy techniques. GO supports are also used for further characterization of assemblies by atomic force microscopy. The simplicity of sample preparation and analysis, as well as the potential for significantly increased contrast background, make GO supports an attractive alternative for the analysis of block copolymer assemblies. PMID:24049544

Artificial muscle-like function from hierarchical supramolecular assembly of photoresponsive molecular motors

NASA Astrophysics Data System (ADS)

Chen, Jiawen; Leung, Franco King-Chi; Stuart, Marc C. A.; Kajitani, Takashi; Fukushima, Takanori; van der Giessen, Erik; Feringa, Ben L.

2018-02-01

A striking feature of living systems is their ability to produce motility by amplification of collective molecular motion from the nanoscale up to macroscopic dimensions. Some of nature's protein motors, such as myosin in muscle tissue, consist of a hierarchical supramolecular assembly of very large proteins, in which mechanical stress induces a coordinated movement. However, artificial molecular muscles have often relied on covalent polymer-based actuators. Here, we describe the macroscopic contractile muscle-like motion of a supramolecular system (comprising 95% water) formed by the hierarchical self-assembly of a photoresponsive amphiphilic molecular motor. The molecular motor first assembles into nanofibres, which further assemble into aligned bundles that make up centimetre-long strings. Irradiation induces rotary motion of the molecular motors, and propagation and accumulation of this motion lead to contraction of the fibres towards the light source. This system supports large-amplitude motion, fast response, precise control over shape, as well as weight-lifting experiments in water and air.

Moments applied in the manual assembly of space structures - Ease biomechanics results from STS-61B. [Experimental Assembly of Structures in EVA

NASA Technical Reports Server (NTRS)

Cousins, D.; Akin, D. L.

1989-01-01

Measurements of the level and pattern of moments applied in the manual assembly of a space structure were made in extravehicular activity (EVA) and neutral buoyancy simulation (NBS). The Experimental Assembly of Structures in EVA program included the repeated assembly of a 3.6 m tetrahedral truss structure in EVA on STS-61B after extensive neutral buoyancy crew training. The flight and training structures were of equivalent mass and geometry to allow a direct correlation between EVA and NBS performance. A stereo photographic motion camera system was used to reconstruct in three dimensions rotational movements of structural beams during assembly. Moments applied in these manual handling tasks were calculated on the basis of the reconstructed movements taking into account effects of inertia, drag and virtual mass. Applied moments of 2.0 Nm were typical for beam rotations in EVA. Corresponding applied moments in NBS were typically up to five times greater. Moments were applied as impulses separated by several seconds of coasting in both EVA and NBS. Decelerating impulses were only infrequently observed in NBS.

Self-assembled nanogaps for molecular electronics.

PubMed

Tang, Qingxin; Tong, Yanhong; Jain, Titoo; Hassenkam, Tue; Wan, Qing; Moth-Poulsen, Kasper; Bjørnholm, Thomas

2009-06-17

A nanogap for molecular devices was realized using solution-based self-assembly. Gold nanorods were assembled to gold nanoparticle-coated conducting SnO2:Sb nanowires via thiol end-capped oligo(phenylenevinylene)s (OPVs). The molecular gap was easily created by the rigid molecule itself during self-assembly and the gap length was determined by the molecule length. The gold nanorods and gold nanoparticles, respectively covalently bonded at the two ends of the molecule, had very small dimensions, e.g. a width of approximately 20 nm, and hence were expected to minimize the screening effect. The ultra-long conducting SnO2:Sb nanowires provided the bridge to connect one of the electrodes of the molecular device (gold nanoparticle) to the external circuit. The tip of the atomic force microscope (AFM) was contacted onto the other electrode (gold nanorod) for the electrical measurement of the OPV device. The conductance measurement confirmed that the self-assembly of the molecules and the subsequent self-assembly of the gold nanorods was a feasible method for the fabrication of the nanogap of the molecular devices.

Truss Assembly and Welding by Intelligent Precision Jigging Robots

NASA Technical Reports Server (NTRS)

Komendera, Erik; Dorsey, John T.; Doggett, William R.; Correll, Nikolaus

2014-01-01

This paper describes an Intelligent Precision Jigging Robot (IPJR) prototype that enables the precise alignment and welding of titanium space telescope optical benches. The IPJR, equipped with micron accuracy sensors and actuators, worked in tandem with a lower precision remote controlled manipulator. The combined system assembled and welded a 2 m truss from stock titanium components. The calibration of the IPJR, and the difference between the predicted and the truss dimensions as-built, identified additional sources of error that should be addressed in the next generation of IPJRs in 2D and 3D.

Mechanical spin bearings

NASA Technical Reports Server (NTRS)

Vranish, John M. (Inventor)

1998-01-01

A spin bearing assembly including, a pair of mutually opposing complementary bearing support members having mutually spaced apart bearing support surfaces which may be, for example, bearing races and a set of spin bearings located therebetween. Each spin bearing includes a pair of end faces, a central rotational axis passing through the end faces, a waist region substantially mid-way between the end faces and having a first thickness dimension, and discrete side surface regions located between the waist region and the end faces and having a second thickness dimension different from the first thickness dimension of the waist region and wherein the side surface regions further have respective curvilinear contact surfaces adapted to provide a plurality of bearing contact points on the bearing support members.

Self-presentational persona: simultaneous management of multiple impressions.

PubMed

Leary, Mark R; Allen, Ashley Batts

2011-11-01

Most research on self-presentation has examined how people convey images of themselves on only 1 or 2 dimensions at a time. In everyday interactions, however, people often manage their impressions on several image-relevant dimensions simultaneously. By examining people's self-presentations to several targets across multiple dimensions, these 2 studies offer new insights into the nature of self-presentation and provide a novel paradigm for studying impression management. Results showed that most people rely on a relatively small number of basic self-presentational personas in which they convey particular profiles of impressions as a set and that these personas reflect both normative influences to project images that are appropriate to a particular target and distinctive influences by which people put an idiosyncratic spin on these normative images. Furthermore, although people's self-presentational profiles correlate moderately with their self-views, they tailor their public images to specific targets. The degree to which participants' self-presentations were normative and distinctive, as well as the extent to which they reflected their own self-views, were moderated by individual differences in agreeableness, self-esteem, authenticity, and Machiavellianism.

Electric Birefringence: A Simple Apparatus for Determining Physical Parameters of Macromolecules and Colloids.

ERIC Educational Resources Information Center

Trimm, Harold H.; And Others

1984-01-01

Describes a birefringence apparatus that can be assembled for less than $100 and can be used to measure both the dimensions and dipole moments of many macromolecules. Details are given of the construction and manipulation of the apparatus. (JN)

Optical critical dimension metrology for directed self-assembly assisted contact hole shrink

NASA Astrophysics Data System (ADS)

Dixit, Dhairya; Green, Avery; Hosler, Erik R.; Kamineni, Vimal; Preil, Moshe E.; Keller, Nick; Race, Joseph; Chun, Jun Sung; O'Sullivan, Michael; Khare, Prasanna; Montgomery, Warren; Diebold, Alain C.

2016-01-01

Directed self-assembly (DSA) is a potential patterning solution for future generations of integrated circuits. Its main advantages are high pattern resolution (˜10 nm), high throughput, no requirement of high-resolution mask, and compatibility with standard fab-equipment and processes. The application of Mueller matrix (MM) spectroscopic ellipsometry-based scatterometry to optically characterize DSA patterned contact hole structures fabricated with phase-separated polystyrene-b-polymethylmethacrylate (PS-b-PMMA) is described. A regression-based approach is used to calculate the guide critical dimension (CD), DSA CD, height of the PS column, thicknesses of underlying layers, and contact edge roughness of the post PMMA etch DSA contact hole sample. Scanning electron microscopy and imaging analysis is conducted as a comparative metric for scatterometry. In addition, optical model-based simulations are used to investigate MM elements' sensitivity to various DSA-based contact hole structures, predict sensitivity to dimensional changes, and its limits to characterize DSA-induced defects, such as hole placement inaccuracy, missing vias, and profile inaccuracy of the PMMA cylinder.

Self-assembly of Archimedean tilings with enthalpically and entropically patchy polygons.

PubMed

Millan, Jaime A; Ortiz, Daniel; van Anders, Greg; Glotzer, Sharon C

2014-03-25

Considerable progress in the synthesis of anisotropic patchy nanoplates (nanoplatelets) promises a rich variety of highly ordered two-dimensional superlattices. Recent experiments of superlattices assembled from nanoplates confirm the accessibility of exotic phases and motivate the need for a better understanding of the underlying self-assembly mechanisms. Here, we present experimentally accessible, rational design rules for the self-assembly of the Archimedean tilings from polygonal nanoplates. The Archimedean tilings represent a model set of target patterns that (i) contain both simple and complex patterns, (ii) are comprised of simple regular shapes, and (iii) contain patterns with potentially interesting materials properties. Via Monte Carlo simulations, we propose a set of design rules with general applicability to one- and two-component systems of polygons. These design rules, specified by increasing levels of patchiness, correspond to a reduced set of anisotropy dimensions for robust self-assembly of the Archimedean tilings. We show for which tilings entropic patches alone are sufficient for assembly and when short-range enthalpic interactions are required. For the latter, we show how patchy these interactions should be for optimal yield. This study provides a minimal set of guidelines for the design of anisostropic patchy particles that can self-assemble all 11 Archimedean tilings.

Experimental investigation of disc brakes for formula Bharat

NASA Astrophysics Data System (ADS)

Misra, Sheelam; Chandra, Sharad; Bagwadi, Ashutosh

2018-05-01

we have made the brake assembly for Formula Student India in which we gathered the information about the force distribution in Master Cylinder, Assembly of Master Cylinder, Disc Brakes, Pedal Assembly has been gathered from various sources in which we come to know about that Vertical Master Cylinder is much better than the Horizontal Master Cylinder because of which we are able to reduce the weight of the Formula Student Car which ultimately affects the performance of the car. In other words, we have considered the various environmental conditions in which this braking system. The dimensions for the Disc Brake rotor is considered according to the space constraints and the material is finalized according to the hunch of calculations and the environmental conditions.

Fail-safe storage rack for irradiated fuel rod assemblies

DOEpatents

Lewis, D.R.

1993-03-23

A fail-safe storage rack is provided for interim storage of spent but radioactive nuclear fuel rod assemblies. The rack consists of a checkerboard array of substantially square, elongate receiving tubes fully enclosed by a double walled container, the outer wall of which is imperforate for liquid containment and the inner wall of which is provided with perforations for admitting moderator liquid flow to the elongate receiving tubes, the liquid serving to take up waste heat from the stored nuclear assemblies and dissipate same to the ambient liquid reservoir. A perforated cover sealing the rack facilitates cooling liquid entry and dissipation.

Fail-safe storage rack for irradiated fuel rod assemblies

DOEpatents

Lewis, Donald R.

1993-01-01

A fail-safe storage rack is provided for interim storage of spent but radioactive nuclear fuel rod assemblies. The rack consists of a checkerboard array of substantially square, elongate receiving tubes fully enclosed by a double walled container, the outer wall of which is imperforate for liquid containment and the inner wall of which is provided with perforations for admitting moderator liquid flow to the elongate receiving tubes, the liquid serving to take up waste heat from the stored nuclear assemblies and dissipate same to the ambient liquid reservoir. A perforated cover sealing the rack facilitates cooling liquid entry and dissipation.

Two-dimensional liquid chromatography consisting of twelve second-dimension columns for comprehensive analysis of intact proteins.

PubMed

Ren, Jiangtao; Beckner, Matthew A; Lynch, Kyle B; Chen, Huang; Zhu, Zaifang; Yang, Yu; Chen, Apeng; Qiao, Zhenzhen; Liu, Shaorong; Lu, Joann J

2018-05-15

A comprehensive two-dimensional liquid chromatography (LCxLC) system consisting of twelve columns in the second dimension was developed for comprehensive analysis of intact proteins in complex biological samples. The system consisted of an ion-exchange column in the first dimension and the twelve reverse-phase columns in the second dimension; all thirteen columns were monolithic and prepared inside 250 µm i.d. capillaries. These columns were assembled together through the use of three valves and an innovative configuration. The effluent from the first dimension was continuously fractionated and sequentially transferred into the twelve second-dimension columns, while the second-dimension separations were carried out in a series of batches (six columns per batch). This LCxLC system was tested first using standard proteins followed by real-world samples from E. coli. Baseline separation was observed for eleven standard proteins and hundreds of peaks were observed for the real-world sample analysis. Two-dimensional liquid chromatography, often considered as an effective tool for mapping proteins, is seen as laborious and time-consuming when configured offline. Our online LCxLC system with increased second-dimension columns promises to provide a solution to overcome these hindrances. Copyright © 2018 Elsevier B.V. All rights reserved.

Cold plate

DOEpatents

Marroquin, Christopher M.; O'Connell, Kevin M.; Schultz, Mark D.; Tian, Shurong

2018-02-13

A cold plate, an electronic assembly including a cold plate, and a method for forming a cold plate are provided. The cold plate includes an interface plate and an opposing plate that form a plenum. The cold plate includes a plurality of active areas arranged for alignment over respective heat generating portions of an electronic assembly, and non-active areas between the active areas. A cooling fluid flows through the plenum. The plenum, at the non-active areas, has a reduced width and/or reduced height relative to the plenum at the active areas. The reduced width and/or height of the plenum, and exterior dimensions of cold plate, at the non-active areas allow the non-active areas to flex to accommodate surface variations of the electronics assembly. The reduced width and/or height non-active areas can be specifically shaped to fit between physical features of the electronics assembly.

Induced helical backbone conformations of self-organizable dendronized polymers.

PubMed

Rudick, Jonathan G; Percec, Virgil

2008-12-01

Control of function through the primary structure of a molecule presents a significant challenge with valuable rewards for nanoscience. Dendritic building blocks encoded with information that defines their three-dimensional shape (e.g., flat-tapered or conical) and how they associate with each other are referred to as self-assembling dendrons. Self-organizable dendronized polymers possess a flat-tapered or conical self-assembling dendritic side chain on each repeat unit of a linear polymer backbone. When appended to a covalent polymer, the self-assembling dendrons direct a folding process (i.e., intramolecular self-assembly). Alternatively, intermolecular self-assembly of dendrons mediated by noncovalent interactions between apex groups can generate a supramolecular polymer backbone. Self-organization, as we refer to it, is the spontaneous formation of periodic and quasiperiodic arrays from supramolecular elements. Covalent and supramolecular polymers jacketed with self-assembling dendrons self-organize. The arrays are most often comprised of cylindrical or spherical objects. The shape of the object is determined by the primary structure of the dendronized polymer: the structure of the self-assembling dendron and the length of the polymer backbone. It is therefore possible to predictably generate building blocks for single-molecule nanotechnologies or arrays of supramolecules for bottom-up self-assembly. We exploit the self-organization of polymers jacketed with self-assembling dendrons to elucidate how primary structure determines the adopted conformation and fold (i.e., secondary and tertiary structure), how the supramolecules associate (i.e., quaternary structure), and their resulting functions. A combination of experimental techniques is employed to interrogate the primary, secondary, tertiary, and quaternary structure of the self-organizable dendronized polymers. We refer to the process by which we interpolate between the various levels of structural information to rationalize function as retrostructural analysis. Retrostructural analysis validates our hypothesis that the self-assembling dendrons induce a helical backbone conformation in cylindrical self-organizable dendronized polymers. This helical conformation mediates unprecedented functions. Self-organizable dendronized polymers have emerged as powerful building blocks for nanoscience by virtue of their dimensions and ability to self-organize. Discrete cylindrical and spherical structures with well-defined dimensions can be visualized and manipulated individually. More importantly, they provide a robust framework for elucidating functions available only at the nanoscale. This Account will highlight structures and functions generated from self-organizable dendronized polymers that enable integration of the nanoworld with its macroscopic universe. Emphasis is placed on those structures and functions derived from the induced helical backbone conformation of cylindrical self-organizable dendronized polymers.

Biomimetic assembly of polypeptide-stabilized CaCO(3) nanoparticles.

PubMed

Zhang, Zhongping; Gao, Daming; Zhao, Hui; Xie, Chenggen; Guan, Guijian; Wang, Dapeng; Yu, Shu-Hong

2006-05-04

In this paper, we report a simple polypeptide-directed strategy for fabricating large spherical assembly of CaCO(3) nanoparticles. Stepwise growth and assembly of a large number of nanoparticles have been observed, from the formation of an amorphous liquidlike CaCO(3)-polypeptide precursor, to the crystallization and stabilization of polypeptide-capped nanoparticles, and eventually, the spherical assembly of nanoparticles. The "soft" poly(aspartate)-capping layer binding on a nanoparticle surface resulted in the unusual soft nature of nanoparticle assembly, providing a reservoir of primary nanoparticles with a moderate mobility, which is the basis of a new strategy for reconstructing nanoparticle assembly into complex nanoparticle architectures. Moreover, the findings of the secondary assembly of nanoparticle microspheres and the morphology transformation of nanoparticle assembly demonstrate a flexible and controllable pathway for manipulating the shapes and structures of nanoparticle assembly. In addition, the combination of the polypeptide with a double hydrophilic block copolymer (DHBC) allows it to possibly further control the shape and complexity of the nanoparticle assembly. A clear perspective is shown here that more complex nanoparticle materials could be created by using "soft" biological proteins or peptides as a mediating template at the organic-inorganic interface.

Influence of film thickness on topology and related magnetic interactions in Fe nanoparticle films

NASA Astrophysics Data System (ADS)

Ausanio, G.; Iannotti, V.; Amoruso, S.; Bruzzese, R.; Wang, X.; Aruta, C.; Arzeo, M.; Lanotte, L.

2013-08-01

Fe nanoparticle (NP)-assembled thin films with different thickness were prepared by femtosecond-pulsed laser deposition using different deposition times. The proper selection of the deposition time allows to control, to a certain degree, the morphology and topology of the deposited Fe nanoparticles (NPs) assembly, fostering non-uniform dense assemblies of NPs, with the consequent reduction of the influence of the exchange interactions on the macroscopic magnetic properties with decreasing thickness. The magnetic behavior of the Fe NP-assembled films with decreasing thickness is characterized by higher coercive field ( H c) values (a factor ≈4.5) and a good compromise between the hysteresis loops squareness and moderate exchange interactions, strongly correlated with the NPs topology.

SMART materials: Surfaces, transforms and interfaces. The commensurate engineering dimension

NASA Astrophysics Data System (ADS)

McDonach, Alaster; Gardiner, Peter T.; McEwen, Ron S.; Culshaw, Brian

1994-11-01

The future of molecularly based smart materials hinges on the development of integrated technologies addressing synthesis, assembly, shaping, etc. and some of these are now becoming clear. Even in the bolt on era new technologies will allow issues of commensurate engineering to be addressed.

Disentangling the Relations between Social Identity and Prosocial and Antisocial Behavior in Competitive Youth Sport.

PubMed

Bruner, Mark W; Boardley, Ian D; Benson, Alex J; Wilson, Kathleen S; Root, Zachary; Turnnidge, Jennifer; Sutcliffe, Jordan; Côté, Jean

2018-05-01

The social identities formed through membership on extracurricular activity groups may contribute to the frequency with which youth engage in prosocial and antisocial behavior. However, researchers have yet to disentangle the individual- and group-level processes social identification effects operate through; sex and perceived norms may also moderate such effects. Thus, we investigated the hierarchical and conditional relations between three dimensions of social identity (i.e., ingroup ties, cognitive centrality, ingroup affect) and prosocial and antisocial behavior in youth ice hockey players (N = 376; 33% female). Multilevel analyses demonstrated antisocial teammate and opponent behavior were predicted by cognitive centrality at the team level. Further, prosocial teammate behavior was predicted by cognitive centrality and ingroup ties at the individual-level. Also, perceived norms for prosocial teammate behavior moderated the relations between ingroup ties, cognitive centrality, and ingroup affect and prosocial teammate behaviour. Finally, sex moderated the relations between cognitive centrality/ingroup affect and antisocial opponent behavior. This work demonstrates the multilevel and conditional nature of how social identity dimensions relate to youth prosocial and antisocial behavior.

Improved de novo genomic assembly for the domestic donkey.

PubMed

Renaud, Gabriel; Petersen, Bent; Seguin-Orlando, Andaine; Bertelsen, Mads Frost; Waller, Andrew; Newton, Richard; Paillot, Romain; Bryant, Neil; Vaudin, Mark; Librado, Pablo; Orlando, Ludovic

2018-04-01

Donkeys and horses share a common ancestor dating back to about 4 million years ago. Although a high-quality genome assembly at the chromosomal level is available for the horse, current assemblies available for the donkey are limited to moderately sized scaffolds. The absence of a better-quality assembly for the donkey has hampered studies involving the characterization of patterns of genetic variation at the genome-wide scale. These range from the application of genomic tools to selective breeding and conservation to the more fundamental characterization of the genomic loci underlying speciation and domestication. We present a new high-quality donkey genome assembly obtained using the Chicago HiRise assembly technology, providing scaffolds of subchromosomal size. We make use of this new assembly to obtain more accurate measures of heterozygosity for equine species other than the horse, both genome-wide and locally, and to detect runs of homozygosity potentially pertaining to positive selection in domestic donkeys. Finally, this new assembly allowed us to identify fine-scale chromosomal rearrangements between the horse and the donkey that likely played an active role in their divergence and, ultimately, speciation.

Improved de novo genomic assembly for the domestic donkey

PubMed Central

Newton, Richard; Paillot, Romain; Bryant, Neil; Vaudin, Mark

2018-01-01

Donkeys and horses share a common ancestor dating back to about 4 million years ago. Although a high-quality genome assembly at the chromosomal level is available for the horse, current assemblies available for the donkey are limited to moderately sized scaffolds. The absence of a better-quality assembly for the donkey has hampered studies involving the characterization of patterns of genetic variation at the genome-wide scale. These range from the application of genomic tools to selective breeding and conservation to the more fundamental characterization of the genomic loci underlying speciation and domestication. We present a new high-quality donkey genome assembly obtained using the Chicago HiRise assembly technology, providing scaffolds of subchromosomal size. We make use of this new assembly to obtain more accurate measures of heterozygosity for equine species other than the horse, both genome-wide and locally, and to detect runs of homozygosity potentially pertaining to positive selection in domestic donkeys. Finally, this new assembly allowed us to identify fine-scale chromosomal rearrangements between the horse and the donkey that likely played an active role in their divergence and, ultimately, speciation. PMID:29740610

Emotional Availability Scale Among Three U.S. Race/Ethnic Groups.

PubMed

Derscheid, Della J; Fogg, Louis F; Julion, Wrenetha; Johnson, Mary E; Tucker, Sharon; Delaney, Kathleen R

2018-05-01

This study used a cross-sectional design to conduct a subgroup psychometric analysis of the Emotional Availability Scale among matched Hispanic ( n = 20), African American ( n = 20), and European American ( n = 10) English-speaking mother-child dyads in the United States. Differences by race/ethnicity were tested ( p < .05) among (a) Emotional Availability Scale dimensions with ANOVA, and (b) relationships of Emotional Availability Scale dimensions with select Dyadic Parent-Child Interaction Coding System variables with Pearson correlation and matched moderated regression. Internal consistency was .950 (Cronbach's α; N = 50). No significant differences in the six Emotional Availability Scale dimension scores by race/ethnicity emerged. Two Dyadic Parent-Child Interaction Coding System behaviors predicted two Emotional Availability Scale dimensions each for Hispanic and African American mother-child dyads. Results suggest emotional availability similarity among race/ethnic subgroups with few predictive differences of emotional availability dimensions by specific behaviors for Hispanic and African American subgroups.

Defining Malaysian Knowledge Society: Results from the Delphi Technique

NASA Astrophysics Data System (ADS)

Hamid, Norsiah Abdul; Zaman, Halimah Badioze

This paper outlines the findings of research where the central idea is to define the term Knowledge Society (KS) in Malaysian context. The research focuses on three important dimensions, namely knowledge, ICT and human capital. This study adopts a modified Delphi technique to seek the important dimensions that can contribute to the development of Malaysian's KS. The Delphi technique involved ten experts in a five-round iterative and controlled feedback procedure to obtain consensus on the important dimensions and to verify the proposed definition of KS. The finding shows that all three dimensions proposed initially scored high and moderate consensus. Round One (R1) proposed an initial definition of KS and required comments and inputs from the panel. These inputs were then used to develop items for a R2 questionnaire. In R2, 56 out of 73 items scored high consensus and in R3, 63 out of 90 items scored high. R4 was conducted to re-rate the new items, in which 8 out of 17 items scored high. Other items scored moderate consensus and no item scored low or no consensus in all rounds. The final round (R5) was employed to verify the final definition of KS. Findings and discovery of this study are significant to the definition of KS and the development of a framework in the Malaysian context.

KDEF-PT: Valence, Emotional Intensity, Familiarity and Attractiveness Ratings of Angry, Neutral, and Happy Faces.

PubMed

Garrido, Margarida V; Prada, Marília

2017-01-01

The Karolinska Directed Emotional Faces (KDEF) is one of the most widely used human facial expressions database. Almost a decade after the original validation study (Goeleven et al., 2008), we present subjective rating norms for a sub-set of 210 pictures which depict 70 models (half female) each displaying an angry, happy and neutral facial expressions. Our main goals were to provide an additional and updated validation to this database, using a sample from a different nationality ( N = 155 Portuguese students, M = 23.73 years old, SD = 7.24) and to extend the number of subjective dimensions used to evaluate each image. Specifically, participants reported emotional labeling (forced-choice task) and evaluated the emotional intensity and valence of the expression, as well as the attractiveness and familiarity of the model (7-points rating scales). Overall, results show that happy faces obtained the highest ratings across evaluative dimensions and emotion labeling accuracy. Female (vs. male) models were perceived as more attractive, familiar and positive. The sex of the model also moderated the accuracy of emotional labeling and ratings of different facial expressions. Each picture of the set was categorized as low, moderate, or high for each dimension. Normative data for each stimulus (hits proportion, means, standard deviations, and confidence intervals per evaluative dimension) is available as supplementary material (available at https://osf.io/fvc4m/).

Do key dimensions of seed and seedling functional trait variation capture variation in recruitment probability?

USDA-ARS?s Scientific Manuscript database

1. Plant functional traits provide a mechanistic basis for understanding ecological variation among plant species and the implications of this variation for species distribution, community assembly and restoration. 2. The bulk of our functional trait understanding, however, is centered on traits rel...

[Health status of the elderly in primary health care practices using an integral geriatric assessment].

PubMed

Cervantes Becerra, Roxana Gisela; Villarreal Ríos, Enrique; Galicia Rodríguez, Liliana; Vargas Daza, Emma Rosa; Martínez González, Lidia

2015-01-01

To determine the health status of patients 60 years of age or over in Primary Health Care practices using an integral geriatric assessment. Descriptive cross-sectional study. Five primary care units, Instituto Mexicano del Seguro Social; México. Elderly patient aged 60 years of age or over, who were seen in primary health care practices. Previously signed informed consent was given, with exclusion criteria being non-completion of the integral geriatric assessment. A technical sample of conglomerates and quota was used. Medical dimension variables: visual, hearing (Hearing Handicap Inventory for the Elderly), urinary incontinence (Consultation in Incontinence Questionnaire), nutritional condition (Mini Nutritional Assessment), personal clinical history, polypharmacy; mental impairment (Mini Mental State Examination), depression (Yesavaje); functional: basic (Katz) and instrumental (Lawton and Brody) activities of daily living, mobility (Up and go) and social (Social sources scale). The analysis included percentages and confidence intervals. In the medical dimensions; 42.3% with visual impairment, 27.7% hearing, 68.3% urinary incontinence, 37.0% malnutrition, and 54.7% polypharmacy. In the mental dimension: 4.0% severe mental impairment, and 11% depression: functional dimension: 2.0% total dependence of activities of daily living; 14.3% instrumental activities impairment; 29.0% mobility impairment, and 48.0% had moderately deteriorated social resources. The health status of the elderly seen in primary health care practices is characterized by independent patients with different levels of alterations in the medical dimensions, low levels in mental alteration, and moderately deteriorated social resources. Copyright © 2013 Elsevier España, S.L.U. All rights reserved.

Nuclear reactors built, being built, or planned, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, B.

1992-07-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1991. The book is divided into three major sections: Section 1 consists of a reactor locator map and reactor tables; Section 2 includes nuclear reactors that are operating, being built, or planned; and Section 3 includes reactors that have been shut down permanently or dismantled. Sections 2 and 3 contain the following classification of reactors: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor ismore » an American company -- working either independently or in cooperation with a foreign company (Part 4, in each section). Critical assembly refers to an assembly of fuel and assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5).« less

Mechanisms of Size Control and Polymorphism in Viral Capsid Assembly

PubMed Central

Elrad, Oren M.; Hagan, Michael F.

2009-01-01

We simulate the assembly dynamics of icosahedral capsids from subunits that interconvert between different conformations (or quasi-equivalent states). The simulations identify mechanisms by which subunits form empty capsids with only one morphology, but adaptively assemble into different icosahedral morphologies around nanoparticle cargoes with varying sizes, as seen in recent experiments with brome mosaic virus (BMV) capsid proteins. Adaptive cargo encapsidation requires moderate cargo-subunit interaction strengths; stronger interactions frustrate assembly by stabilizing intermediates with incommensurate curvature. We compare simulation results to experiments with cowpea chlorotic mottle virus empty capsids and BMV capsids assembled on functionalized nanoparticles, and suggest new cargo encapsidation experiments. Finally, we find that both empty and templated capsids maintain the precise spatial ordering of subunit conformations seen in the crystal structure even if interactions that preserve this arrangement are favored by as little as the thermal energy, consistent with experimental observations that different subunit conformations are highly similar. PMID:18950240

Robust hydrogen-bonded self-assemblies from biimidazole complexes. Synthesis and structural characterization of [M(biimidazole)2(OH2)2]2+ (M = Co2+, Ni2+) complexes and carboxylate modules.

PubMed

Atencio, Reinaldo; Chacón, Mirbel; González, Teresa; Briceño, Alexander; Agrifoglio, Giuseppe; Sierraalta, Anibal

2004-02-21

A robust heteromeric hydrogen-bonded synthon [R2(2) (9)-Id] is exploited to drive the modular self-assembly of four coordination complexes [M(H2biim)2(OH2)2]2+ (M = Co2+, Ni2+) and carboxylate counterions. This strategy allowed us to build molecular architectures of 0-, 1-, and 2-dimensions. A hydrogen-bonded 2D-network with cavities has been designed, which maintains its striking integrity after reversible water desorption-resorption processes.

Self-assembled LiFePO4 nanowires with high rate capability for Li-ion batteries.

PubMed

Peng, Lele; Zhao, Yu; Ding, Yu; Yu, Guihua

2014-08-28

Controlling the dimensions in the nanometer scale of olivine-type LiFePO4 has been regarded as one of the most effective strategies to improve its electrochemical performance for Li-ion batteries. In this communication, we demonstrate a novel LiFePO4 nanoarchitecture, which is composed of self-assembled single-crystalline nanowires and exhibits good rate capability with a reversible capacity of ∼110 mA h g(-1) at a current rate of 30 C, and a stable capacity retention of ∼86% after 1000 cycles at a current rate of 10 C.

Assembling of Steel Angle Headframe of Multifunctional Purpose

NASA Astrophysics Data System (ADS)

Kassikhina, E. G.; Pershin, V. V.; Volkov, V. M.

2017-10-01

The article reviews new technical solution on equipment provision of vertical shaft utilizing steel headframe of multifunctional purpose. Practice of construction of coal and ore mines provides application of various designs for steel angle headframes which are divided into separate large assembly blocks and constructive elements during assembling operations. Design of these blocks and elements, their weight and dimensions effect the chose of the method of assembling on which economic and technological indicators, as well as duration of down-time, depend on during performance of construction operations in shaft. The technical solution on equipment provision for mine vertical shaft using headframe of multifunctional purpose will allow changing the management construction of vertical shaft. The proposed headframe combines the functions of sinking and operation that eliminates costs for assembling/dissembling of temporary headgear. The constructive design of the headgear allows application of the effective method of assembly and thus to provide improvement of the technical and economic indexes, and high calendar time rate of the shaft construction due to reduction of duration of works on equipment provision for the shaft and to refurbishment of the shaft in order to carry out horizontal mining.

A new building block for DNA network formation by self-assembly and polymerase chain reaction.

PubMed

Bußkamp, Holger; Keller, Sascha; Robotta, Marta; Drescher, Malte; Marx, Andreas

2014-01-01

The predictability of DNA self-assembly is exploited in many nanotechnological approaches. Inspired by naturally existing self-assembled DNA architectures, branched DNA has been developed that allows self-assembly to predesigned architectures with dimensions on the nanometer scale. DNA is an attractive material for generation of nanostructures due to a plethora of enzymes which modify DNA with high accuracy, providing a toolbox for many different manipulations to construct nanometer scaled objects. We present a straightforward synthesis of a rigid DNA branching building block successfully used for the generation of DNA networks by self-assembly and network formation by enzymatic DNA synthesis. The Y-shaped 3-armed DNA construct, bearing 3 primer strands is accepted by Taq DNA polymerase. The enzyme uses each arm as primer strand and incorporates the branched construct into large assemblies during PCR. The networks were investigated by agarose gel electrophoresis, atomic force microscopy, dynamic light scattering, and electron paramagnetic resonance spectroscopy. The findings indicate that rather rigid DNA networks were formed. This presents a new bottom-up approach for DNA material formation and might find applications like in the generation of functional hydrogels.

Growth Mechanism of Cluster-Assembled Surfaces: From Submonolayer to Thin-Film Regime

NASA Astrophysics Data System (ADS)

Borghi, Francesca; Podestà, Alessandro; Piazzoni, Claudio; Milani, Paolo

2018-04-01

Nanostructured films obtained by assembling preformed atomic clusters are of strategic importance for a wide variety of applications. The deposition of clusters produced in the gas phase onto a substrate offers the possibility to control and engineer the structural and functional properties of the cluster-assembled films. To date, the microscopic mechanisms underlying the growth and structuring of cluster-assembled films are poorly understood, and, in particular, the transition from the submonolayer to the thin-film regime is experimentally unexplored. Here we report the systematic characterization by atomic force microscopy of the evolution of the structural properties of cluster-assembled films deposited by supersonic cluster beam deposition. As a paradigm of nanostructured systems, we focus our attention on cluster-assembled zirconia films, investigating the influence of the building block dimensions on the growth mechanisms and roughening of the thin films, following the growth process from the early stages of the submonolayer to the thin-film regime. Our results demonstrate that the growth dynamics in the submonolayer regime determines different morphological properties of the cluster-assembled thin film. The evolution of the roughness with the number of deposited clusters reproduces the growth exponent of the ballistic deposition in the 2 +1 model from the submonolayer to the thin-film regime.

Square and Rectangular Arrays from Directed Assembly of Sphere-forming Diblock Copolymers in Thin Films

NASA Astrophysics Data System (ADS)

Ji, Shengxiang; Nagpal, Umang; Liao, Wen; de Pablo, Juan; Nealey, Paul

2010-03-01

Patterns of square and rectangular arrays with nanoscale dimensions are scientifically and technologically important. Fabrication of square array patterns in thin films has been demonstrated by directed assembly of cylinder-forming diblock copolymers on chemically patterned substrates, supramolecular assembly of diblock copolymers, and self-assembly of triblock terpolymers. However, a macroscopic area of square array patterns with long-range order has not been achieved, and the fabrication of rectangular arrays has not been reported so far. Here we report a facile approach for fabricating patterns of square and rectangular arrays by directing the assembly of sphere-forming diblock copolymers on chemically patterned substrates. On stripe patterns, a square arrangement of half spheres, corresponding to the (100) plane of the body-centred cubic (BCC) lattice, formed on film surfaces. When the underlying pattern periods mismatched with the copolymer period, the square pattern could be stretched (up to ˜60%) or compressed (˜15%) to form rectangular arrays. Monte Carlo simulations have been further used to verify the experimental results and the 3-dimensional arrangements of spheres.

[Position of health at international relations. Part I. Structural dimensions of health].

PubMed

Cianciara, Dorota; Wysocki, Mirosław J

2011-01-01

In the article, the health is perceived as complex, multidimensional concept and not as absence of disease. This is consistent with public health perspective, where public health is regarded as public as well as political activity. It aims to solve health and social problems, depends on analysis of phenomena, needs the negotiations and relies on making decision on feasible directions of changes--what, why, how, where, when and by whom should be done. Public health policy developed as a result of international relations, and UN family fora especially, is regarded as significant for creating of health position. The aim of this article was: (1) the analysis of selected concepts and definitions related to structural dimensions of health, used in UN international arrangements; (2) an attempt to explain the evolution of health structure notions at worldwide agenda. The UN main bodies, programmes and funds working on the health field are mentioned and voting rules in UN General Assembly and World Health Assembly are reminded. The following structural dimensions were considered: (a) well-being, (b) human rights, (c) everyday resource, health potential, (4) equity. All were explored in WHO Constitution, Universal Declaration of Human Rights, International Covenant on Economic, Social and Cultural Rights, Ottawa Charter for Health Promotion and numerous WHA and UN GA resolutions, decisions as well as other documents. Some remarkable differences in English and Polish language versions and meanings were pointed out. It was argued that present perception of structural dimension of health is strongly derived from the preamble of the WHO Constitution adopted and signed on 22 July 1946 by the representatives of 61 States. It is an evidence of the strength of this document and wisdom of its authors. The greater progress is associated. with concepts and notion of organizational dimensions of health perceived as action and processes leading to health. Long-term efforts to strengthen the image of health was compared to positioning known in marketing as creating an identity in the minds of a target market.

Parsing the heterogeneity of psychopathy and aggression: Differential associations across dimensions and gender.

PubMed

Hecht, Lisa K; Berg, Joanna M; Lilienfeld, Scott O; Latzman, Robert D

2016-01-01

Psychopathy is a multidimensional construct that is broadly associated with both reactive (RA) and proactive (PA) aggression. Nevertheless, a consistent pattern of associations between psychopathy and these 2 aggression subtypes has yet to emerge because of methodological differences across studies. Moreover, research has yet to examine gender differences in the relation between dimensions of psychopathy and RA/PA. Accordingly, we examined the associations between psychopathy dimensions, as operationalized by 2 self-report instruments, and subtypes of aggression within a diverse sample of undergraduates (N = 1,158). Results confirmed that psychopathy is broadly associated with PA, as well as RA, with dimensions of psychopathy evidencing common and distinct associations with both raw and residual RA and PA scores. In both models of psychopathy, PA was significantly and positively associated with all dimensions, whereas RA was significantly negatively associated with interpersonal and affective dimensions, and significantly positively associated with dimensions related to an antisocial and impulsive lifestyle. Gender significantly moderated associations among dimensions of psychopathy and RA/PA, such that the antisocial/behavioral dimension of psychopathy was positively associated with PA for males, whereas the antisocial/behavioral dimension was positively associated with RA for females. Results suggest both generality and specificity of psychopathy dimensions as related to subtypes of aggression, as well as possible differential pathways from psychopathy to different subtypes of aggression in men and women. (c) 2016 APA, all rights reserved).

Design of hybrid two-dimensional and three-dimensional nanostructured arrays for electronic and sensing applications

NASA Astrophysics Data System (ADS)

Ko, Hyunhyub

This dissertation presents the design of organic/inorganic hybrid 2D and 3D nanostructured arrays via controlled assembly of nanoscale building blocks. Two representative nanoscale building blocks such as carbon nanotubes (one-dimension) and metal nanoparticles (zero-dimension) are the core materials for the study of solution-based assembly of nanostructured arrays. The electrical, mechanical, and optical properties of the assembled nanostructure arrays have been investigated for future device applications. We successfully demonstrated the prospective use of assembled nanostructure arrays for electronic and sensing applications by designing flexible carbon nanotube nanomembranes as mechanical sensors, highly-oriented carbon nanotubes arrays for thin-film transistors, and gold nanoparticle arrays for SERS chemical sensors. In first section, we fabricated highly ordered carbon nanotube (CNT) arrays by tilted drop-casting or dip-coating of CNT solution on silicon substrates functionalized with micropatterned self-assembled monolayers. We further exploited the electronic performance of thin-film transistors based on highly-oriented, densely packed CNT micropatterns and showed that the carrier mobility is largely improved compared to randomly oriented CNTs. The prospective use of Raman-active CNTs for potential mechanical sensors has been investigated by studying the mechano-optical properties of flexible carbon nanotube nanomembranes, which contain freely-suspended carbon nanotube array encapsulated into ultrathin (<50 nm) layer-by-layer (LbL) polymer multilayers. In second section, we fabricated 3D nano-canal arrays of porous alumina membranes decorated with gold nanoparticles for prospective SERS sensors. We showed extraordinary SERS enhancement and suggested that the high performance is associated with the combined effects of Raman-active hot spots of nanoparticle aggregates and the optical waveguide properties of nano-canals. We demonstrated the ability of this SERS substrate for trace level sensing of nitroaromatic explosives by detecting down to 100 zeptogram (˜330 molecules) of DNT.

Building macromolecular assemblies by information-driven docking: introducing the HADDOCK multibody docking server.

PubMed

Karaca, Ezgi; Melquiond, Adrien S J; de Vries, Sjoerd J; Kastritis, Panagiotis L; Bonvin, Alexandre M J J

2010-08-01

Over the last years, large scale proteomics studies have generated a wealth of information of biomolecular complexes. Adding the structural dimension to the resulting interactomes represents a major challenge that classical structural experimental methods alone will have difficulties to confront. To meet this challenge, complementary modeling techniques such as docking are thus needed. Among the current docking methods, HADDOCK (High Ambiguity-Driven DOCKing) distinguishes itself from others by the use of experimental and/or bioinformatics data to drive the modeling process and has shown a strong performance in the critical assessment of prediction of interactions (CAPRI), a blind experiment for the prediction of interactions. Although most docking programs are limited to binary complexes, HADDOCK can deal with multiple molecules (up to six), a capability that will be required to build large macromolecular assemblies. We present here a novel web interface of HADDOCK that allows the user to dock up to six biomolecules simultaneously. This interface allows the inclusion of a large variety of both experimental and/or bioinformatics data and supports several types of cyclic and dihedral symmetries in the docking of multibody assemblies. The server was tested on a benchmark of six cases, containing five symmetric homo-oligomeric protein complexes and one symmetric protein-DNA complex. Our results reveal that, in the presence of either bioinformatics and/or experimental data, HADDOCK shows an excellent performance: in all cases, HADDOCK was able to generate good to high quality solutions and ranked them at the top, demonstrating its ability to model symmetric multicomponent assemblies. Docking methods can thus play an important role in adding the structural dimension to interactomes. However, although the current docking methodologies were successful for a vast range of cases, considering the variety and complexity of macromolecular assemblies, inclusion of some kind of experimental information (e.g. from mass spectrometry, nuclear magnetic resonance, cryoelectron microscopy, etc.) will remain highly desirable to obtain reliable results.

Comparison of various second-dimension gradient types in comprehensive two-dimensional liquid chromatography.

PubMed

Jandera, Pavel; Hájek, Tomás; Cesla, Petr

2010-06-01

Gradient elution provides significant improvement in peak capacity with respect to isocratic conditions. In the second dimension, gradients are limited to a short-time period available for separation. Various types of second-dimension gradients in comprehensive LC x LC are compared: (i) "full in fraction", (ii) "segment in fraction" and (iii) "continuously shifting" gradients, applied in orthogonal LC x LC separations of phenolic acids and flavones on a polyethylene glycol column in the first dimension and two types of porous shell fused-core C18 columns in the second dimension (Ascentis Express and Kinetex). The porous shell columns provide narrow bandwidths and fast second-dimension separations at moderate operating pressure that allows important savings of the overall separation time in comprehensive LC x LC separations. The effects of the gradient type on the bandwidths, theoretical peak capacity, separation time and column pressure in the second dimension were investigated. The type of gradient program controls the range of lipophilicity of sample compounds that can be separated in the second-dimension reversed-phase time period. This range can be calibrated using alkylbenzene standards, to design the separation conditions for complete sample separation, avoiding harmful wrap around of non-eluted compounds to the subsequent second-dimension fractions.

Self-assembled nanostructures of optically active phthalocyanine derivatives. Effect of central metal ion on the morphology, dimension, and handedness.

PubMed

Sun, Ranran; Wang, Liang; Tian, Jing; Zhang, Xiaomei; Jiang, Jianzhuang

2012-11-21

Four optically active {(2,3,9,10,16,17,23,24-octa[(S)-2-methylbutoxy]} phthalocyanine derivatives with different central metal ions, namely (S)-H2Pc(β-OC5H11)8 (1), (S)-ZnPc(β-OC5H11)8 (2), (S)-CuPc(β-OC5H11)8 (3), and (S)-NiPc(β-OC5H11)8 (4) have been synthesized and their self-assembly behaviors systematically investigated by electronic absorption and circular dichroism (CD) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) techniques, and X-ray photoelectron spectroscopy (XPS). Metal free phthalocyanine together with its zinc and copper congeners self-assembles into right-handed helical arrangements in a stack of phthalocyanine chromophores according to the CD spectroscopic result, while the nickel complex does so into the left-handed helical arrangements. These helical arrangements, acting as elemental primary structures, further pack in a hierarchical fashion into either highly ordered right-handed fibrous nanostructures with average 300 μm length, 4.8 μm width, and 4.4 μm helical pitch for 1 and 300 μm length, 2.4 μm width, and 1.8 μm helical pitch for 2 but left-handed fibrous nanostructures with average 4 μm length, 0.48 μm width, and 0.12 μm helical pitch for 3 and 300 μm length, 2 μm width, and 1.2 μm helical pitch for 4, clearly revealing the effect of central metal ion on the distance and relative orientation of neighboring phthalocyanine chromophores and in turn the supramolecular chirality, morphology, dimension, and handedness of the self-assembled nanostructures. The present result not only represents a unique phenomenon in the self-assembly of phthalocyanine compounds but more importantly denotes the transcription and amplification of molecular chirality to supramolecular helicity with different helical bias during the self-assembly processes without changing the chiral handles attached to the phthalocyanine chromophore.

Family Functioning and Dysfunctional Eating Among Italian Adolescents: The Moderating Role of Gender.

PubMed

Laghi, Fiorenzo; McPhie, Meghan L; Baumgartner, Emma; Rawana, Jennine S; Pompili, Sara; Baiocco, Roberto

2016-02-01

The first aim of this study was to examine the association between different dimensions of family functioning and dysfunctional eating in a sample of Italian adolescent boys and girls. The second aim was to investigate whether gender moderates the relationship between family functioning and dysfunctional eating. Seven hundred and twenty seven adolescents (500 boys and 227 girls) with ages ranging from 15 to 18 years completed a survey of self-report measures. Findings from hierarchical multiple regression analysis suggested that aspects of family functioning such as flexibility, cohesion, disengagement, enmeshment, rigidity and chaotic were related to dysfunctional eating in adolescents. Additionally the results indicated differences between boys and girls, in particular dysfunctional eating in adolescent boys seemed to be more affected by dimensions of enmeshment and disengagement than dysfunctional eating in girls. This research highlights the important role of various aspects of family functioning in relation to dysfunctional eating in adolescents.

The effects of corporate social responsibility on employees' affective commitment: a cross-cultural investigation.

PubMed

Mueller, Karsten; Hattrup, Kate; Spiess, Sven-Oliver; Lin-Hi, Nick

2012-11-01

This study investigated the moderating effects of several Global Leadership and Organizational Behavior Effectiveness (GLOBE) cultural value dimensions on the relationship between employees' perceptions of their organization's social responsibility and their affective organizational commitment. Based on data from a sample of 1,084 employees from 17 countries, results showed that perceived corporate social responsibility (CSR) was positively related to employees' affective commitment (AC), after controlling for individual job satisfaction and gender as well as for nation-level differences in unemployment rates. In addition, several GLOBE value dimensions moderated the effects of CSR on AC. In particular, perceptions of CSR were more positively related to AC in cultures higher in humane orientation, institutional collectivism, ingroup collectivism, and future orientation and in cultures lower in power distance. Implications for future CSR research and cross-cultural human resources management are discussed. (c) 2012 APA, all rights reserved.

Academic identity formation and motivation among ethnic minority adolescents: the role of the "self" between internal and external perceptions of identity.

PubMed

Matthews, Jamaal S; Banerjee, Meeta; Lauermann, Fani

2014-01-01

Identity is often studied as a motivational construct within research on adolescent development and education. However, differential dimensions of identity, as a set of internal values versus external perceptions of social belonging, may relate to motivation in distinct ways. Utilizing a sample of 600 African American and Latino adolescents (43% female; mean age = 13.9), the present study examines whether self-regulated learning (SRL) mediates two distinct dimensions of academic identity (i.e., value and belonging) and mastery orientation. This study also examines whether self-efficacy moderates the mediating role of SRL between identity and mastery. Results show evidence for moderated mediation between SRL and academic self-efficacy. Self-regulated learning played its strongest mediating role between belonging and mastery and for low-efficacy students specifically. © 2014 The Authors. Child Development © 2014 Society for Research in Child Development, Inc.

Minority stress, ethnic identity, and depression among Latino/a college students.

PubMed

Arbona, Consuelo; Jimenez, Carolina

2014-01-01

The main purpose of the study was to examine among Latino/a college students the extent to which dimensions of minority stress related to ethnic group membership (college climate, academic achievement, ethnic discrimination, and intra-ethnic pressure stress) were uniquely associated with depression symptoms when general college stress was taken into account. The study also examined if ethnic identity moderated the relation of minority stress to depression symptoms. Participants were 309 Latino/a undergraduate students (53% women; 69% of Mexican descent) enrolled in a diverse, major research, urban, public university in the southwestern United States. Findings revealed that minority stress in the areas of academic concerns and negative perceptions of the campus climate contributed unique variance to depression symptoms when controlling for gender and students' general college stress. Ethnic identity did not moderate the relation of any of the minority stress dimensions to depression. Implications of these findings are discussed. (c) 2014 APA, all rights reserved.

Sequential Stereotype Priming: A Meta-Analysis.

PubMed

Kidder, Ciara K; White, Katherine R; Hinojos, Michelle R; Sandoval, Mayra; Crites, Stephen L

2017-08-01

Psychological interest in stereotype measurement has spanned nearly a century, with researchers adopting implicit measures in the 1980s to complement explicit measures. One of the most frequently used implicit measures of stereotypes is the sequential priming paradigm. The current meta-analysis examines stereotype priming, focusing specifically on this paradigm. To contribute to ongoing discussions regarding methodological rigor in social psychology, one primary goal was to identify methodological moderators of the stereotype priming effect-whether priming is due to a relation between the prime and target stimuli, the prime and target response, participant task, stereotype dimension, stimulus onset asynchrony (SOA), and stimuli type. Data from 39 studies yielded 87 individual effect sizes from 5,497 participants. Analyses revealed that stereotype priming is significantly moderated by the presence of prime-response relations, participant task, stereotype dimension, target stimulus type, SOA, and prime repetition. These results carry both practical and theoretical implications for future research on stereotype priming.

Promoting safety voice with safety-specific transformational leadership: the mediating role of two dimensions of trust.

PubMed

Conchie, Stacey M; Taylor, Paul J; Donald, Ian J

2012-01-01

Although safety-specific transformational leadership is known to encourage employee safety voice behaviors, less is known about what makes this style of leadership effective. We tested a model that links safety-specific transformational leadership to safety voice through various dimensions of trust. Data from 150 supervisor-employee dyads from the United Kingdom oil industry supported our predictions that the effects of safety-specific transformational leadership are sequentially mediated by affect-based trust beliefs and disclosure trust intentions. Moreover, we found that reliance trust intentions moderated the effect of disclosure: employees' disclosure intentions mediated the effects of affect-based trust on safety voice behaviors only when employees' intention to rely on their leader was moderate to high. These findings suggest that leaders seeking to encourage safety voice behaviors should go beyond "good reason" arguments and develop affective bonds with their employees.

Cannabis use in early adolescence is associated with higher negative schizotypy in females.

PubMed

Albertella, L; Le Pelley, M E; Copeland, J

2017-09-01

The current study examined the relationship between early onset cannabis use (before age 16) and different schizotypy dimensions, and whether gender moderates these associations. Participants were 162 cannabis users, aged 15-24 years, who completed an online assessment examining alcohol and other drug use, psychological distress, and schizotypy. Participants were divided according to whether or not they had started using cannabis before the age of 16 (early onset=47; later onset=115) and gender (males=66; females=96). The interaction between gender and onset group was significantly associated with the dimension of introvertive anhedonia. Follow-up analyses showed that early onset cannabis use was associated with higher levels of introvertive anhedonia in females only. The current findings suggest that gender is an important moderator in the association between early onset cannabis use, schizotypy, and possibly, psychosis risk. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

NEUTRON-IRRADIATED STRUCTURES

DOEpatents

Ashley, E.L.; Ashley, J.W.; Bowker, H.W.; Hall, R.H.; Kendall, J.W.

1959-02-01

A moderator structure is described for a nuclear reactor of the heterogensous type wherein a large mass of moderator is provided with channels therethrough for the introduction of uranium serving as nuclear fuel and for the passage of a cooling fluid. The structure is comprised of blocks of moderator material in superposed horizontal layers, the blocks of each layer being tied together with spaces between them and oriented to have horizontal Wigner growth. The ties are strips of moderator material, the same as the blocks, with transverse Wigner growth, disposed horizontally along lines crossing at vertical axes of the blocks. The blocks are preferably rectangular with a larger or length dimension transverse to the directions of Wiguer growth and are stood on end to provide for horizontal growth.

Social relationships and physician utilization among older adults-A systematic review.

PubMed

Bremer, Daniel; Inhestern, Laura; von dem Knesebeck, Olaf

2017-01-01

In older age health needs and demand for health services utilization increase. Individual's social relationships can play a decisive role regarding the utilization of outpatient health care services. This systematic review examines the associations of structural and functional dimensions of social relationships with outpatient health services use of older adults. The databases PubMed, CINAHL, SocINDEX, PsycINFO, International Bibliography of the Social Sciences (IBSS), Sociological Abstracts, and Applied Social Sciences Index and Abstracts (ASSIA) were searched in February 2016. The methodological and reporting quality of the articles was assessed and the results were synthesized descriptively and systematically. Out of 1.392 hits, 36 articles (35 studies) were included in the systematic review. The methodological and reporting quality of the included articles was reasonable. Various structural and functional characteristics of social relationships were associated with the use (yes/no) and the frequency of using outpatient care among older adults. The majority of the associations between structural dimensions of social relationships and the use of physicians were positive and moderate in strength. The associations between functional dimensions of social relationships and the probability of using physician services were inconsistent and varied in strength. For the most part, social relationship variables assigned to the structural dimension were positively and weakly to moderately associated with the frequency of physician visits. Functional aspects of social relationships also tended to have positive associations with the frequency of physician utilization. The associations were weak to moderate in strength. Measuring social relationships and their influence on health services use is a challenging methodological endeavor indicated by the inconclusive results. The results suggest that the outpatient care utilization behavior of older individuals being structurally and functionally integrated in social relationships is different to older adults being socially isolated or having no social support. All in all, the current status of quantitative data was insufficient. Future health services research should accentuate social ties in more detail, especially according to quality aspects of social relationships.

Gamma ray detector modules

NASA Technical Reports Server (NTRS)

Capote, M. Albert (Inventor); Lenos, Howard A. (Inventor)

2009-01-01

A radiation detector assembly has a semiconductor detector array substrate of CdZnTe or CdTe, having a plurality of detector cell pads on a first surface thereof, the pads having a contact metallization and a solder barrier metallization. An interposer card has planar dimensions no larger than planar dimensions of the semiconductor detector array substrate, a plurality of interconnect pads on a first surface thereof, at least one readout semiconductor chip and at least one connector on a second surface thereof, each having planar dimensions no larger than the planar dimensions of the interposer card. Solder columns extend from contacts on the interposer first surface to the plurality of pads on the semiconductor detector array substrate first surface, the solder columns having at least one solder having a melting point or liquidus less than 120 degrees C. An encapsulant is disposed between the interposer circuit card first surface and the semiconductor detector array substrate first surface, encapsulating the solder columns, the encapsulant curing at a temperature no greater than 120 degrees C.

Line-frequency doubling of directed self-assembly patterns for single-digit bit pattern media lithography

NASA Astrophysics Data System (ADS)

Patel, K. C.; Ruiz, R.; Lille, J.; Wan, L.; Dobiz, E.; Gao, H.; Robertson, N.; Albrecht, T. R.

2012-03-01

Directed self-assembly is emerging as a promising technology to define sub-20nm features. However, a straightforward path to scale block copolymer lithography to single-digit fabrication remains challenging given the diverse material properties found in the wide spectrum of self-assembling materials. A vast amount of block copolymer research for industrial applications has been dedicated to polystyrene-b-methyl methacrylate (PS-b-PMMA), a model system that displays multiple properties making it ideal for lithography, but that is limited by a weak interaction parameter that prevents it from scaling to single-digit lithography. Other block copolymer materials have shown scalability to much smaller dimensions, but at the expense of other material properties that could delay their insertion into industrial lithographic processes. We report on a line doubling process applied to block copolymer patterns to double the frequency of PS-b-PMMA line/space features, demonstrating the potential of this technique to reach single-digit lithography. We demonstrate a line-doubling process that starts with directed self-assembly of PS-b-PMMA to define line/space features. This pattern is transferred into an underlying sacrificial hard-mask layer followed by a growth of self-aligned spacers which subsequently serve as hard-masks for transferring the 2x frequency doubled pattern to the underlying substrate. We applied this process to two different block copolymer materials to demonstrate line-space patterns with a half pitch of 11nm and 7nm underscoring the potential to reach single-digit critical dimensions. A subsequent patterning step with perpendicular lines can be used to cut the fine line patterns into a 2-D array of islands suitable for bit patterned media. Several integration challenges such as line width control and line roughness are addressed.

Laser induced hierarchical calcium phosphate structures.

PubMed

Kurella, Anil; Dahotre, Narendra B

2006-11-01

The surface properties of biomedical implant materials control the dynamic interactions at tissue-implant interfaces. At such interfaces, if the nanoscale features influence protein interactions, those of the microscale and mesoscale aid cell orientation and provide tissue integration, respectively. It seems imperative that the synthetic materials expected to replace natural hard tissues are engineered to mimic the complexity of their hierarchical assembly. However, the current surface engineering approaches are single scaled. It is demonstrated that using laser surface engineering a controlled multiscale surface can be synthesized for bioactive functions. A systematic organization of bioactive calcium phosphate coating with multiphase composition on Ti-alloy substrate ranging from nano- to mesoscale has been achieved by effectively controlling the thermo physical interactions during laser processing. The morphology of the coating consisted of a periodic arrangement of Ti-rich and Ca-P-deficient star-like phases uniformly distributed inside a Ca-P-rich self-assembled cellular structure with the presence of CaO, alpha-tricalcium phosphate, CaTiO(3), TiO(2) and Ti phase in the coating matrix. The cellular structures ranged in diameter from 2.5 microm to 10 microm as an assembly of cuboid shaped particles of dimensions of approximately 200 nm x 1 microm. The multiscale texture also included nanoscale particles that are the precursors for many of these phases. The rapid cooling associated with the laser processing resulted in formation, organization and controlling dimensions of the Ca-P-rich glassy phase into a micron scale cellular morphology and submicron scale clusters of CaTiO(3) phase inside the cellular structures. The self-assembly of the coating into multiscale structure was influenced by chemical and physical interactions among the multiphases that evolved during laser processing.

29 CFR (non - mandatory) Appendix A to Subpart L of Part 1926-Scaffold Specifications

Code of Federal Regulations, 2012 CFR

2012-07-01

... this part. An employer may use these guidelines and tables as a starting point for designing scaffold..., and the employer is still responsible for designing and assembling these components in such a way that... components with other dimensions, etc.) must be designed and constructed in accordance with the capacity...

Project Hill-Climb: Drafting and Design in Motion

ERIC Educational Resources Information Center

Crowl, William F.

2008-01-01

This article describes the Hill-Climb project of a second level Computer-Aided Drafting and Design (CADD) class. The author primarily designed the activity to increase student understanding of the assembly drawing process and its components. The emphasis on problem solving adds a dimension that can aid students in their other classes as well. By…

Composite lamination method

NASA Technical Reports Server (NTRS)

Dickerson, G. E. (Inventor)

1977-01-01

A process was developed for preparing relatively thick composite laminate structure wherein thin layers of prepreg tapes are assembled, these thin layers are cut into strips that are partially cured, and stacked into the desired thickness with uncured prepreg disposed between each layer of strips. The formed laminate is finally cured and thereafter machined to the desired final dimensions.

Constraint elimination in dynamical systems

NASA Technical Reports Server (NTRS)

Singh, R. P.; Likins, P. W.

1989-01-01

Large space structures (LSSs) and other dynamical systems of current interest are often extremely complex assemblies of rigid and flexible bodies subjected to kinematical constraints. A formulation is presented for the governing equations of constrained multibody systems via the application of singular value decomposition (SVD). The resulting equations of motion are shown to be of minimum dimension.

The Teaching of Critical Thinking Skills by Academic Librarians.

ERIC Educational Resources Information Center

Goetzfridt, Nicholas J.

Teaching critical thinking is a relatively new dimension of bibliographic instruction (BI) in the academic environment. It marks a departure from the teaching of "user skills" in which the primary concern is enabling library patrons to determine the appropriateness of reference tools and to use those tools effectively. This report assembles a…

Immigration Stress and Alcohol Use Severity Among Recently Immigrated Hispanic Adults: Examining Moderating Effects of Gender, Immigration Status, and Social Support.

PubMed

Cano, Miguel Ángel; Sánchez, Mariana; Trepka, Mary Jo; Dillon, Frank R; Sheehan, Diana M; Rojas, Patria; Kanamori, Mariano J; Huang, Hui; Auf, Rehab; De La Rosa, Mario

2017-03-01

Identifying and understanding determinants of alcohol use behavior among Hispanic immigrants is an increasingly significant public health concern. Although prior research has examined associations of cultural stressors with alcohol use among Hispanics, few studies have tested these associations among recent adult immigrants. As such, this study aimed to examine (a) the association of immigration stress on alcohol use severity among recently immigrated Hispanic adults (≤ 1 year in the United States) and (b) the moderating effects of gender, immigration status, and social support. A hierarchical multiple regression and moderation analyses were conducted on a sample of 527 participants in South Florida. Results indicated that, after controlling for demographic variables, preimmigration drinking behavior, and dimensions of social support, the association of higher immigration stress with higher alcohol use severity was statistically significant. Moderation analyses indicated that immigration stress had a statistically significant association with alcohol use severity among men, but not women. Also, dimensions of social support consistently reduced the deleterious effect of immigration stress on alcohol use severity. This study adds to the scarce literature on cultural stressors and alcohol use among recent Hispanic immigrants. Findings suggest that it may be important to design gender-specific interventions and that increasing levels of social support may offset the effects of immigration stress on alcohol use. © 2016 Wiley Periodicals, Inc.

Caregivers' burden and depressive symptoms: the moderational role of attachment orientations.

PubMed

Vilchinsky, Noa; Dekel, Rachel; Revenson, Tracey A; Liberman, Gabriel; Mosseri, Morris

2015-03-01

The current study explored whether attachment orientations moderate the associations between caregiver burden and depressive symptoms among women coping with their partners' first time acute coronary syndrome. The association between burden and depression was hypothesized to be stronger among caregivers high on anxious attachment than among caregivers low on this dimension. In addition, the association between burden and depressive symptoms was hypothesized to be weaker among caregivers higher on avoidant attachment than among those lower on this dimension. The sample consisted of 111 female caregivers of male patients admitted to the cardiac care unit of a hospital in Israel. Caregivers completed a measure of attachment orientations during patients' hospitalization (baseline). Caregiver burden was measured 1 month later. Depressive symptoms were measured at baseline and again at 6-month follow-up. Structural equation modeling was used to test the moderational models. The association between caregiver burden and depressive symptoms at follow-up was moderated by attachment-related anxiety but not attachment-related avoidance. Congruent with predictions, a stronger association between caregiver burden and depressive symptoms occurred for caregivers with greater (vs. lower) attachment anxiety. The findings shed light on the possible dynamics among attachment orientations and affect regulation when coping with one's partner's illness. The findings are discussed in light of Pietromonaco, Uchino, and Dunkel Schetter's (2013) model of integrating attachment into health psychology research. PsycINFO Database Record (c) 2015 APA, all rights reserved.

Directed self-assembly of block copolymers for nanolithography: fabrication of isolated features and essential integrated circuit geometries.

PubMed

Stoykovich, Mark P; Kang, Huiman; Daoulas, Kostas Ch; Liu, Guoliang; Liu, Chi-Chun; de Pablo, Juan J; Müller, Marcus; Nealey, Paul F

2007-10-01

Self-assembling block copolymers are of interest for nanomanufacturing due to the ability to realize sub-100 nm dimensions, thermodynamic control over the size and uniformity and density of features, and inexpensive processing. The insertion point of these materials in the production of integrated circuits, however, is often conceptualized in the short term for niche applications using the dense periodic arrays of spots or lines that characterize bulk block copolymer morphologies, or in the long term for device layouts completely redesigned into periodic arrays. Here we show that the domain structure of block copolymers in thin films can be directed to assemble into nearly the complete set of essential dense and isolated patterns as currently defined by the semiconductor industry. These results suggest that block copolymer materials, with their intrinsically advantageous self-assembling properties, may be amenable for broad application in advanced lithography, including device layouts used in existing nanomanufacturing processes.

Coarse-grained molecular simulation of self-assembly for nonionic surfactants on graphene nanostructures.

PubMed

Wu, Dan; Yang, Xiaoning

2012-10-04

Self-assembly of amphiphilic molecules on the surfaces of nanoscale materials has an important application in a variety of nanotechnology. Here, we report a coarse-grained molecular dynamics simulation on the structure and morphology of the nonionic surfactant, n-alkyl poly(ethylene oxide) (PEO), adsorbed on planar graphene nanostructures. The effects of concentration, surfactant structure, and size of graphene sheet are explored. Because of the finite dimension effect, various morphological hemimicelles can be formed on nanoscale graphene surfaces, which is somewhat different from the self-assembly structures on infinite carbon surfaces. The aggregate morphology is highly dependent on the concentration, the chain lengths, and the size of graphene nanosheets. For the nonionic surfactant, the PEO headgroups show strong dispersion interaction with the carbon surface, leading to a side edge adsorption behavior. This simulation provides insight into the supramolecular self-assembly nanostructures and the adsorption mechanism for the nonionic surfactants aggregated on graphene nanostructures, which could be exploited to guide fabrication of graphene-based nanocomposites.

Evaluation of Isoprene Chain Extension from PEO Macromolecular Chain Transfer Agents for the Preparation of Dual, Invertible Block Copolymer Nanoassemblies.

PubMed

Bartels, Jeremy W; Cauët, Solène I; Billings, Peter L; Lin, Lily Yun; Zhu, Jiahua; Fidge, Christopher; Pochan, Darrin J; Wooley, Karen L

2010-09-14

Two RAFT-capable PEO macro-CTAs, 2 and 5 kDa, were prepared and used for the polymerization of isoprene which yielded well-defined block copolymers of varied lengths and compositions. GPC analysis of the PEO macro-CTAs and block copolymers showed remaining unreacted PEO macro-CTA. Mathematical deconvolution of the GPC chromatograms allowed for the estimation of the blocking efficiency, about 50% for the 5 kDa PEO macro-CTA and 64% for the 2 kDa CTA. Self assembly of the block copolymers in both water and decane was investigated and the resulting regular and inverse assemblies, respectively, were analyzed with DLS, AFM, and TEM to ascertain their dimensions and properties. Assembly of PEO-b-PIp block copolymers in aqueous solution resulted in well-defined micelles of varying sizes while the assembly in hydrophobic, organic solvent resulted in the formation of different morphologies including large aggregates and well-defined cylindrical and spherical structures.

Analysis of a Neutronic Experiment on a Simulated Mercury Spallation Neutron Target Assembly Bombarded by Giga-Electron-Volt Protons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maekawa, Fujio; Meigo, Shin-ichiro; Kasugai, Yoshimi

2005-05-15

A neutronic benchmark experiment on a simulated spallation neutron target assembly was conducted by using the Alternating Gradient Synchrotron at Brookhaven National Laboratory and was analyzed to investigate the prediction capability of Monte Carlo simulation codes used in neutronic designs of spallation neutron sources. The target assembly consisting of a mercury target, a light water moderator, and a lead reflector was bombarded by 1.94-, 12-, and 24-GeV protons, and the fast neutron flux distributions around the target and the spectra of thermal neutrons leaking from the moderator were measured in the experiment. In this study, the Monte Carlo particle transportmore » simulation codes NMTC/JAM, MCNPX, and MCNP-4A with associated cross-section data in JENDL and LA-150 were verified based on benchmark analysis of the experiment. As a result, all the calculations predicted the measured quantities adequately; calculated integral fluxes of fast and thermal neutrons agreed approximately within {+-}40% with the experiments although the overall energy range encompassed more than 12 orders of magnitude. Accordingly, it was concluded that these simulation codes and cross-section data were adequate for neutronics designs of spallation neutron sources.« less

NUCLEAR SUPERHEATER FOR BOILING WATER REACTOR

DOEpatents

Holl, R.J.; Klecker, R.W.; Graham, C.B.

1962-05-15

A description is given of a boiling water reactor having a superheating region integral with the core. The core consists essentially of an annular boiling region surrounding an inner superheating region. Both regions contain fuel elements and are separated by a cylindrical wall, perforations being provided in the lower portion of the cylindrical wall to permit circulation of a common water moderator between the two regions. The superheater region comprises a plurality of tubular fuel assemblies through which the steam emanating from the boiling region passes to the steam outlet. Each superheater fuel assembly has an outer double-walled cylinder, the double walls being concentrically spaced and connected together at their upper ends but open at the bottom to provide for differential thermal expansion of the inner and outer walls. Gas is entrapped in the annulus between the walls which acts as an insulating space between the fissionable material inside and the moderator outside. (AEC)

The Social Explanatory Styles Questionnaire: Assessing Moderators of Basic Social-Cognitive Phenomena Including Spontaneous Trait Inference, the Fundamental Attribution Error, and Moral Blame

PubMed Central

Gill, Michael J.; Andreychik, Michael R.

2014-01-01

Why is he poor? Why is she failing academically? Why is he so generous? Why is she so conscientious? Answers to such everyday questions—social explanations—have powerful effects on relationships at the interpersonal and societal levels. How do people select an explanation in particular cases? We suggest that, often, explanations are selected based on the individual's pre-existing general theories of social causality. More specifically, we suggest that over time individuals develop general beliefs regarding the causes of social events. We refer to these beliefs as social explanatory styles. Our goal in the present article is to offer and validate a measure of individual differences in social explanatory styles. Accordingly, we offer the Social Explanatory Styles Questionnaire (SESQ), which measures three independent dimensions of social explanatory style: Dispositionism, historicism, and controllability. Studies 1–3 examine basic psychometric properties of the SESQ and provide positive evidence regarding internal consistency, factor structure, and both convergent and divergent validity. Studies 4–6 examine predictive validity for each subscale: Does each explanatory dimension moderate an important phenomenon of social cognition? Results suggest that they do. In Study 4, we show that SESQ dispositionism moderates the tendency to make spontaneous trait inferences. In Study 5, we show that SESQ historicism moderates the tendency to commit the Fundamental Attribution Error. Finally, in Study 6 we show that SESQ controllability predicts polarization of moral blame judgments: Heightened blaming toward controllable stigmas (assimilation), and attenuated blaming toward uncontrollable stigmas (contrast). Decades of research suggest that explanatory style regarding the self is a powerful predictor of self-functioning. We think it is likely that social explanatory styles—perhaps comprising interactive combinations of the basic dimensions tapped by the SESQ—will be similarly potent predictors of social functioning. We hope the SESQ will be a useful tool for exploring that possibility. PMID:25007152

Conscious motor processing and movement self-consciousness: two dimensions of personality that influence laparoscopic training.

PubMed

Malhotra, Neha; Poolton, Jamie M; Wilson, Mark R; Fan, Joe K M; Masters, Rich S W

2014-01-01

Identifying personality factors that account for individual differences in surgical training and performance has practical implications for surgical education. Movement-specific reinvestment is a potentially relevant personality factor that has a moderating effect on laparoscopic performance under time pressure. Movement-specific reinvestment has 2 dimensions, which represent an individual's propensity to consciously control movements (conscious motor processing) or to consciously monitor their 'style' of movement (movement self-consciousness). This study aimed at investigating the moderating effects of the 2 dimensions of movement-specific reinvestment in the learning and updating (cross-handed technique) of laparoscopic skills. Medical students completed the Movement-Specific Reinvestment Scale, a psychometric assessment tool that evaluates the conscious motor processing and movement self-consciousness dimensions of movement-specific reinvestment. They were then trained to a criterion level of proficiency on a fundamental laparoscopic skills task and were tested on a novel cross-handed technique. Completion times were recorded for early-learning, late-learning, and cross-handed trials. Propensity for movement self-consciousness but not conscious motor processing was a significant predictor of task completion times both early (p = 0.036) and late (p = 0.002) in learning, but completion times during the cross-handed trials were predicted by the propensity for conscious motor processing (p = 0.04) rather than movement self-consciousness (p = 0.21). Higher propensity for movement self-consciousness is associated with slower performance times on novel and well-practiced laparoscopic tasks. For complex surgical techniques, however, conscious motor processing plays a more influential role in performance than movement self-consciousness. The findings imply that these 2 dimensions of movement-specific reinvestment have a differential influence in the learning and updating of laparoscopic skills. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Negative life events and life satisfaction in university students: Belief in a just world as a mediator and moderator.

PubMed

Tian, Xunlong

2016-11-01

A cross-sectional study was conducted to explore the role of belief in a just world between negative life events and life satisfaction. The results revealed that two dimensions of belief in a just world played partial mediating roles between negative life events and life satisfaction. Moreover, belief in a just world was also a moderator between negative life events and life satisfaction that mitigates the adverse effects of negative life events. In conclusion, these results suggest that belief in a just world could be both a mediator and a moderator between negative life events and life satisfaction.

The moderating effect of religiosity on caregiving burden and depressive symptoms in caregivers of patients with dementia.

PubMed

Yoon, Kyung Hee; Moon, Yoo Sun; Lee, Yunhwan; Choi, Seong Hye; Moon, So Young; Seo, Sang Won; Park, Kyung Won; Ku, Bon D; Han, Hyun Jeong; Park, Kee Hyung; Han, Seol-Heui; Kim, Eun-Joo; Lee, Jae-Hong; Park, Sun A; Shim, Yong S; Kim, Jong Hun; Hong, Chang Hyung; Na, Duk L; Ye, Byoung Seok; Kim, Hee Jin; Moon, Yeonsil; Lee, Sang Soo; Kim, Do Hoon

2018-01-01

This study explored whether religiosity/spirituality has a protective role against negative caregiving outcomes, in a large multicenter nationwide sample of caregivers of patients with dementia in South Korea. Additionally, this study was the first to examine whether religiosity/spirituality could affect caregiving outcomes according to the various religious affiliations of caregivers. The study was conducted on a sample of 476 caregivers of patients with dementia participated in the Clinical Research Center for Dementia of South Korea (CREDOS). We examined the moderating effect of each of the three dimensions of religiosity/spirituality (organizational religious activity, ORA; non-organizational religious activity, NORA; intrinsic religiosity, IR) on the relationship between activities of daily living (ADL) of patients with dementia and caregiving burden and depressive symptoms of caregivers, using a series of hierarchical regression analyses. In addition, these analyses were conducted according to the religious affiliations of the caregivers. ORA, NORA, and IR of religiosity/spirituality alleviated the effect of ADL of patients on caregiving burden. ORA and IR moderated the relationship between ADL of patients and depressive symptoms of caregivers. These moderating effects of religiosity on caregiving outcomes were different according to various religious groups. We have identified religiosity/spirituality as a protective factor for caregivers of patients with dementia. The sub-dimensions of religiosity as moderators were different by religious affiliations of caregivers. Further studies are needed to investigate the specific religiosity-related factors which could positively impact the mental health of the caregivers of patients with dementia by religions.

Thermo-mechanical behavior of power electronic packaging assemblies: From characterization to predictive simulation of lifetimes

NASA Astrophysics Data System (ADS)

Dalverny, O.; Alexis, J.

2018-02-01

This article deals with thermo-mechanical behavior of power electronic modules used in several transportation applications as railway, aeronautic or automotive systems. Due to a multi-layered structures, involving different materials with a large variation of coefficient of thermal expansion, temperature variations originated from active or passive cycling (respectively from die dissipation or environmental constraint) induces strain and stresses field variations, giving fatigue phenomenon of the system. The analysis of the behavior of these systems and their dimensioning require the implementation of complex modeling strategies by both the multi-physical and the multi-scale character of the power modules. In this paper we present some solutions for studying the thermomechanical behavior of brazed assemblies as well as taking into account the interfaces represented by the numerous metallizations involved in the process assembly.

A comparative analysis of predictors of sense of place dimensions: attachment to, dependence on, and identification with lakeshore properties.

PubMed

Jorgensen, Bradley S; Stedman, Richard C

2006-05-01

Sense of place can be conceived as a multidimensional construct representing beliefs, emotions and behavioural commitments concerning a particular geographic setting. This view, grounded in attitude theory, can better reveal complex relationships between the experience of a place and attributes of that place than approaches that do not differentiate cognitive, affective and conative domains. Shoreline property owners (N=290) in northern Wisconsin were surveyed about their sense of place for their lakeshore properties. A predictive model comprising owners' age, length of ownership, participation in recreational activities, days spent on the property, extent of property development, and perceptions of environmental features, was employed to explain the variation in dimensions of sense of place. In general, the results supported a multidimensional approach to sense of place in a context where there were moderate to high correlations among the three place dimensions. Perceptions of environmental features were the biggest predictors of place dimensions, with owners' perceptions of lake importance varying in explanatory power across place dimensions.

A behavioral genetic study of intrapersonal and interpersonal dimensions of narcissism.

PubMed

Luo, Yu L L; Cai, Huajian; Song, Hairong

2014-01-01

Narcissism, characterized by grandiose self-image and entitled feelings to others, has been increasingly prevalent in the past decades. This study examined genetic and environmental bases of two dimensions of narcissism: intrapersonal grandiosity and interpersonal entitlement. A total of 304 pairs of twins from Beijing, China completed the Narcissistic Grandiosity Scale and the Psychological Entitlement Scale. Both grandiosity (23%) and entitlement (35%) were found to be moderately heritable, while simultaneously showing considerable non-shared environmental influences. Moreover, the genetic and environmental influences on the two dimensions were mostly unique (92-93%), with few genetic and environmental effects in common (7-8%). The two dimensions of narcissism, intrapersonal grandiosity and interpersonal entitlement, are heritable and largely independent of each other in terms of their genetic and environmental sources. These findings extend our understanding of the heritability of narcissism on the one hand. On the other hand, the study demonstrates the rationale for distinguishing between intrapersonal and interpersonal dimensions of narcissism, and possibly personality in general as well.

A Behavioral Genetic Study of Intrapersonal and Interpersonal Dimensions of Narcissism

PubMed Central

Luo, Yu L. L.; Cai, Huajian; Song, Hairong

2014-01-01

Narcissism, characterized by grandiose self-image and entitled feelings to others, has been increasingly prevalent in the past decades. This study examined genetic and environmental bases of two dimensions of narcissism: intrapersonal grandiosity and interpersonal entitlement. A total of 304 pairs of twins from Beijing, China completed the Narcissistic Grandiosity Scale and the Psychological Entitlement Scale. Both grandiosity (23%) and entitlement (35%) were found to be moderately heritable, while simultaneously showing considerable non-shared environmental influences. Moreover, the genetic and environmental influences on the two dimensions were mostly unique (92–93%), with few genetic and environmental effects in common (7–8%). The two dimensions of narcissism, intrapersonal grandiosity and interpersonal entitlement, are heritable and largely independent of each other in terms of their genetic and environmental sources. These findings extend our understanding of the heritability of narcissism on the one hand. On the other hand, the study demonstrates the rationale for distinguishing between intrapersonal and interpersonal dimensions of narcissism, and possibly personality in general as well. PMID:24695616

The dynamic of urban and protected areas at Balai Raja Wildlife Reserve, Riau, Indonesia: a social ecology approach

NASA Astrophysics Data System (ADS)

Suwondo; Darmadi; Yunus, M.

2018-01-01

The development process has resulted in deforestation. A comprehensive study is needed to obtain an objective solution by integrating the ecological dimension and human dimension. This study was conducted within Balai Raja Wildlife Reserve (BRWR), Bengkalis Regency, Riau Province, Indonesia. We used the social-ecological systems (SES) approach based on local characteristics, categorized into ecological status, social status and actors. Each factoris ranked using Multi-Dimensional Scaling (MDS).BRWR sustainability levels are in moderate condition. The ecological dimension is in a less sustainable state, with leverage: (1) forest conversion; (2) local ecological knowledge; (3) high conservation value. The social dimension is in a less sustainable state, with leverage: (1) community empowerment; (2) social conflict; (3) participation in landscape management. Dimensions actors are on a fairly sustainable status, with leverage: (1) institutional interaction; (2) stakeholder’s commitment; (3) law enforcement. We recommend strengthening community empowerment, local ecological knowledge, interaction, and stakeholder commitment

Psychopathic traits moderate peer influence on adolescent delinquency.

PubMed

Kerr, Margaret; Van Zalk, Maarten; Stattin, Håkan

2012-08-01

Peer influence on adolescent delinquency is well established, but little is known about moderators of peer influence. In this study, we examined adolescents' (targets) and their peers' psychopathic personality traits as moderators of peer influence on delinquency in peer networks. We used three separate dimensions of the psychopathic personality: grandiose-manipulative traits, callous-unemotional traits, and impulsive-irresponsible traits. We used a peer network approach with five waves of longitudinal data from 847 adolescents in one community. Peer nominations were not limited to the school context, thus allowing us to capture all potentially important peers. In addition, peers reported on their own delinquency, thus allowing us to avoid problems of false consensus or projection that arise when individuals report on their peers' delinquency. We used simulation investigation for empirical network analyses (SIENA), which is the only program currently available that can be used to study peer influence effects in peer networks of multiple relationships while controlling for selection effects. Targets' and peers' callous-unemotional and grandiose-manipulative traits uniquely moderated peer influence on delinquency. Relative to those with low levels, targets who were high on these traits were less influenced by peers' delinquency, and peers who were high on these traits were more influential on targets' delinquency. Selection effects were found for impulsive-irresponsible traits, but these traits did not moderate peer influence on delinquency. As the first study to look at moderating effects of psychopathic traits on peer influence, this study advances knowledge about peer influence on delinquency and about psychopathic traits in adolescents. In addition, the study contributes to the literature by looking at unique effects of the three dimensions of psychopathy and taking a peer network approach, in which network effects, self-selection, and other selection effects are controlled when examining influence and moderators of influence. © 2011 The Authors. Journal of Child Psychology and Psychiatry © 2011 Association for Child and Adolescent Mental Health.

Particle impactor assembly for size selective high volume air sampler

DOEpatents

Langer, Gerhard

1988-08-16

Air containing entrained particulate matter is directed through a plurality of parallel, narrow, vertically oriented impactor slots of an inlet element toward an adjacently located, relatively large, dust impaction surface preferably covered with an adhesive material. The air flow turns over the impaction surface, leaving behind the relatively larger particles according to the human thoracic separation system and passes through two elongate exhaust apertures defining the outer bounds of the impaction collection surface to pass through divergent passages which slow down and distribute the air flow, with entrained smaller particles, over a fine filter element that separates the fine particles from the air. The elongate exhaust apertures defining the impaction collection surface are spaced apart by a distance greater than the lengths of elongate impactor slots in the inlet element and are oriented to be normal thereto. By appropriate selection of dimensions and the number of impactor slots air flow through the inlet element is provided a nonuniform velocity distribution with the lower velocities being obtained near the center of the impactor slots, in order to separate out particles larger than a certain predetermined size on the impaction collection surface. The impaction collection surface, even in a moderately sized apparatus, is thus relatively large and permits the prolonged sampling of air for periods extending to four weeks.

Task oriented nonlinear control laws for telerobotic assembly operations

NASA Technical Reports Server (NTRS)

Walker, R. A.; Ward, L. S.; Elia, C. F.

1987-01-01

The goal of this research is to achieve very intelligent telerobotic controllers which are capable of receiving high-level commands from the human operator and implementing them in an adaptive manner in the object/task/manipulator workspace. Initiatives by the authors at Integrated Systems, Inc. to identify and develop the key technologies necessary to create such a flexible, highly programmable, telerobotic controller are presented. The focus of the discussion is on the modeling of insertion tasks in three dimensions and nonlinear implicit force feedback control laws which incorporate tool/workspace constraints. Preliminary experiments with dual arm beam assembly in 2-D are presented.

Ultrahigh-Density Nanowire Arrays Grown in Self-Assembled Diblock Copolymer Templates

NASA Astrophysics Data System (ADS)

Thurn-Albrecht, T.; Schotter, J.; Kästle, G. A.; Emley, N.; Shibauchi, T.; Krusin-Elbaum, L.; Guarini, K.; Black, C. T.; Tuominen, M. T.; Russell, T. P.

2000-12-01

We show a simple, robust, chemical route to the fabrication of ultrahigh-density arrays of nanopores with high aspect ratios using the equilibrium self-assembled morphology of asymmetric diblock copolymers. The dimensions and lateral density of the array are determined by segmental interactions and the copolymer molecular weight. Through direct current electrodeposition, we fabricated vertical arrays of nanowires with densities in excess of 1.9 × 1011 wires per square centimeter. We found markedly enhanced coercivities with ferromagnetic cobalt nanowires that point toward a route to ultrahigh-density storage media. The copolymer approach described is practical, parallel, compatible with current lithographic processes, and amenable to multilayered device fabrication.

Novel Multidimensional Cross-Correlation Data Comparison Techniques for Spectroscopic Discernment in a Volumetrically Sensitive, Moderating Type Neutron Spectrometer

NASA Astrophysics Data System (ADS)

Hoshor, Cory; Young, Stephan; Rogers, Brent; Currie, James; Oakes, Thomas; Scott, Paul; Miller, William; Caruso, Anthony

2014-03-01

A novel application of the Pearson Cross-Correlation to neutron spectral discernment in a moderating type neutron spectrometer is introduced. This cross-correlation analysis will be applied to spectral response data collected through both MCNP simulation and empirical measurement by the volumetrically sensitive spectrometer for comparison in 1, 2, and 3 spatial dimensions. The spectroscopic analysis methods discussed will be demonstrated to discern various common spectral and monoenergetic neutron sources.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gonzalez-Esquer, C. Raul; Twary, Scott N.; Hovde, Blake T.

Picochlorum soloecismus is a halotolerant, fast-growing, and moderate-lipid-producing microalga that is being evaluated as a renewable feedstock for biofuel production. Herein, we report on an improved high-quality draft assembly and annotation for the nuclear, chloroplast, and mitochondrial genomes of P. soloecismus DOE 101.

Social-Emotional Development

ERIC Educational Resources Information Center

Moran, Lyndsey R.; Lengua, Liliana J.; Zalewski, Maureen

2013-01-01

Interactions between reactive and regulatory dimensions of temperament may be particularly relevant to children's adjustment but are examined infrequently. This study investigated these interactions by examining effortful control as a moderator of the relations of fear and frustration reactivity to children's social competence, internalizing, and…

Personality assessment of homeless adults as a tool for service planning.

PubMed

Tolomiczenko, G S; Sota, T; Goering, P N

2000-01-01

The psychiatric status of homeless adults has been described primarily in terms of Axis I disorders. By adding a subset of the Personality Assessment Inventory, this study tests the feasibility and usefulness of a brief, self-administered questionnaire to obtain scores on several dimensions of personality. Cluster analysis sorted 112 tested subjects into four groups characterized by distinct profiles. Two of these were characterized by extreme scores on pathological dimensions of personality (borderline features, antisocial traits, and aggressivity) and differed primarily on the dimension of suicidality. The third reflected moderate levels of personality dysfunction and the fourth did not deviate from adult nonclinical norms. The validity of the clusters was supported by demographic, background, and diagnostic subgroup differences. Brief personality assessment can be a cost-effective approach to matching services with clinical needs of homeless adults by attending to interpersonal dimensions that will likely affect service provision.

Vibration Monitoring Using Fiber Optic Sensors in a Lead-Bismuth Eutectic Cooled Nuclear Fuel Assembly †

PubMed Central

De Pauw, Ben; Lamberti, Alfredo; Ertveldt, Julien; Rezayat, Ali; van Tichelen, Katrien; Vanlanduit, Steve; Berghmans, Francis

2016-01-01

Excessive fuel assembly vibrations in nuclear reactor cores should be avoided in order not to compromise the lifetime of the assembly and in order to prevent the occurrence of safety hazards. This issue is particularly relevant to new reactor designs that use liquid metal coolants, such as, for example, a molten lead-bismuth eutectic. The flow of molten heavy metal around and through the fuel assembly may cause the latter to vibrate and hence suffer degradation as a result of, for example, fretting wear or mechanical fatigue. In this paper, we demonstrate the use of optical fiber sensors to measure the fuel assembly vibration in a lead-bismuth eutectic cooled installation which can be used as input to assess vibration-related safety hazards. We show that the vibration characteristics of the fuel pins in the fuel assembly can be experimentally determined with minimal intrusiveness and with high precision owing to the small dimensions and properties of the sensors. In particular, we were able to record local strain level differences of about 0.2 μϵ allowing us to reliably estimate the vibration amplitudes and modal parameters of the fuel assembly based on optical fiber sensor readings during different stages of the operation of the facility, including the onset of the coolant circulation and steady-state operation. PMID:27110782

Material selection and assembly method of battery pack for compact electric vehicle

NASA Astrophysics Data System (ADS)

Lewchalermwong, N.; Masomtob, M.; Lailuck, V.; Charoenphonphanich, C.

2018-01-01

Battery packs become the key component in electric vehicles (EVs). The main costs of which are battery cells and assembling processes. The battery cell is indeed priced from battery manufacturers while the assembling cost is dependent on battery pack designs. Battery pack designers need overall cost as cheap as possible, but it still requires high performance and more safety. Material selection and assembly method as well as component design are very important to determine the cost-effectiveness of battery modules and battery packs. Therefore, this work presents Decision Matrix, which can aid in the decision-making process of component materials and assembly methods for a battery module design and a battery pack design. The aim of this study is to take the advantage of incorporating Architecture Analysis method into decision matrix methods by capturing best practices for conducting design architecture analysis in full account of key design components critical to ensure efficient and effective development of the designs. The methodology also considers the impacts of choice-alternatives along multiple dimensions. Various alternatives for materials and assembly techniques of battery pack are evaluated, and some sample costs are presented. Due to many components in the battery pack, only seven components which are positive busbar and Z busbar are represented in this paper for using decision matrix methods.

Nondeterministic self-assembly of two tile types on a lattice.

PubMed

Tesoro, S; Ahnert, S E

2016-04-01

Self-assembly is ubiquitous in nature, particularly in biology, where it underlies the formation of protein quaternary structure and protein aggregation. Quaternary structure assembles deterministically and performs a wide range of important functions in the cell, whereas protein aggregation is the hallmark of a number of diseases and represents a nondeterministic self-assembly process. Here we build on previous work on a lattice model of deterministic self-assembly to investigate nondeterministic self-assembly of single lattice tiles and mixtures of two tiles at varying relative concentrations. Despite limiting the simplicity of the model to two interface types, which results in 13 topologically distinct single tiles and 106 topologically distinct sets of two tiles, we observe a wide variety of concentration-dependent behaviors. Several two-tile sets display critical behaviors in the form of a sharp transition from bound to unbound structures as the relative concentration of one tile to another increases. Other sets exhibit gradual monotonic changes in structural density, or nonmonotonic changes, while again others show no concentration dependence at all. We catalog this extensive range of behaviors and present a model that provides a reasonably good estimate of the critical concentrations for a subset of the critical transitions. In addition, we show that the structures resulting from these tile sets are fractal, with one of two different fractal dimensions.

Free-flow zone electrophoresis: a novel approach and scale-up for preparative protein separation.

PubMed

Poggel, M; Melin, T

2001-04-01

Different continuously working free-flow zone electrophoresis (FFZE) chambers have already been developed [1, 2]. All of them deal with the problem of distinctive Joule heating. The resulting temperature gradients cause an unstable density field which leads to thermal convection and thus to an intermixing of the different fractions within the chamber. The most promising and simple approach to stabilize the flow is to build chambers with one very small dimension (e.g., h = 0.5 mm) to assure efficient heat withdrawal. This in turn presents substantial disadvantages, namely limited throughput and restricted scale-up potential. The novel approach combines a simplified design and assembly with the possibility of straightforward scale-up. It still operates with one small dimension (d = 1-2 mm) to handle the Joule heating. Here, however, not the dimension perpendicular to the electric field but the dimension parallel to the electric field (separation distance) is chosen as the smallest dimension. The efficiency of the new device is shown by the separation of bovine serum albumin (BSA) and cytochrome c with an overall protein throughput of up to 1.1 g/h, using a cell with a separation volume of less than 20 mL.

Dimension dependence of clustering dynamics in models of ballistic aggregation and freely cooling granular gas

NASA Astrophysics Data System (ADS)

Paul, Subhajit; Das, Subir K.

2018-03-01

Via event-driven molecular dynamics simulations we study kinetics of clustering in assemblies of inelastic particles in various space dimensions. We consider two models, viz., the ballistic aggregation model (BAM) and the freely cooling granular gas model (GGM), for each of which we quantify the time dependence of kinetic energy and average mass of clusters (that form due to inelastic collisions). These quantities, for both the models, exhibit power-law behavior, at least in the long time limit. For the BAM, corresponding exponents exhibit strong dimension dependence and follow a hyperscaling relation. In addition, in the high packing fraction limit the behavior of these quantities become consistent with a scaling theory that predicts an inverse relation between energy and mass. On the other hand, in the case of the GGM we do not find any evidence for such a picture. In this case, even though the energy decay, irrespective of packing fraction, matches quantitatively with that for the high packing fraction picture of the BAM, it is inversely proportional to the growth of mass only in one dimension, and the growth appears to be rather insensitive to the choice of the dimension, unlike the BAM.

Surface patterning of nanoparticles with polymer patches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choueiri, Rachelle M.; Galati, Elizabeth; Thérien-Aubin, Héloïse

Patterning of colloidal particles with chemically or topographically distinct surface domains (patches) has attracted intense research interest. Surface-patterned particles act as colloidal analogues of atoms and molecules serve as model systems in studies of phase transitions in liquid systems, behave as ‘colloidal surfactants’ and function as templates for the synthesis of hybrid particles. The generation of micrometre- and submicrometre-sized patchy colloids is now efficient but surface patterning of inorganic colloidal nanoparticles with dimensions of the order of tens of nanometres is uncommon. Such nanoparticles exhibit size- and shape-dependent optical, electronic and magnetic properties, and their assemblies show new collective properties.more » At present, nanoparticle patterning is limited to the generation of two-patch nanoparticles and nanoparticles with surface ripples or a ‘raspberry’ surface morphology. We demonstrate nanoparticle surface patterning, which utilizes thermodynamically driven segregation of polymer ligands from a uniform polymer brush into surface-pinned micelles following a change in solvent quality. Patch formation is reversible but can be permanently preserved using a photocrosslinking step. The methodology offers the ability to control the dimensions of patches, their spatial distribution and the number of patches per nanoparticle, in agreement with a theoretical model. The versatility of the strategy is demonstrated by patterning nanoparticles with different dimensions, shapes and compositions, tethered with various types of polymers and subjected to different external stimuli. Furthermore, these patchy nanocolloids have potential applications in fundamental research, the self-assembly of nanomaterials, diagnostics, sensing and colloidal stabilization.« less

Surface patterning of nanoparticles with polymer patches

DOE PAGES

Choueiri, Rachelle M.; Galati, Elizabeth; Thérien-Aubin, Héloïse; ...

2016-08-24

Patterning of colloidal particles with chemically or topographically distinct surface domains (patches) has attracted intense research interest. Surface-patterned particles act as colloidal analogues of atoms and molecules serve as model systems in studies of phase transitions in liquid systems, behave as ‘colloidal surfactants’ and function as templates for the synthesis of hybrid particles. The generation of micrometre- and submicrometre-sized patchy colloids is now efficient but surface patterning of inorganic colloidal nanoparticles with dimensions of the order of tens of nanometres is uncommon. Such nanoparticles exhibit size- and shape-dependent optical, electronic and magnetic properties, and their assemblies show new collective properties.more » At present, nanoparticle patterning is limited to the generation of two-patch nanoparticles and nanoparticles with surface ripples or a ‘raspberry’ surface morphology. We demonstrate nanoparticle surface patterning, which utilizes thermodynamically driven segregation of polymer ligands from a uniform polymer brush into surface-pinned micelles following a change in solvent quality. Patch formation is reversible but can be permanently preserved using a photocrosslinking step. The methodology offers the ability to control the dimensions of patches, their spatial distribution and the number of patches per nanoparticle, in agreement with a theoretical model. The versatility of the strategy is demonstrated by patterning nanoparticles with different dimensions, shapes and compositions, tethered with various types of polymers and subjected to different external stimuli. Furthermore, these patchy nanocolloids have potential applications in fundamental research, the self-assembly of nanomaterials, diagnostics, sensing and colloidal stabilization.« less

Surface patterning of nanoparticles with polymer patches

NASA Astrophysics Data System (ADS)

Choueiri, Rachelle M.; Galati, Elizabeth; Thérien-Aubin, Héloïse; Klinkova, Anna; Larin, Egor M.; Querejeta-Fernández, Ana; Han, Lili; Xin, Huolin L.; Gang, Oleg; Zhulina, Ekaterina B.; Rubinstein, Michael; Kumacheva, Eugenia

2016-10-01

Patterning of colloidal particles with chemically or topographically distinct surface domains (patches) has attracted intense research interest. Surface-patterned particles act as colloidal analogues of atoms and molecules, serve as model systems in studies of phase transitions in liquid systems, behave as ‘colloidal surfactants’ and function as templates for the synthesis of hybrid particles. The generation of micrometre- and submicrometre-sized patchy colloids is now efficient, but surface patterning of inorganic colloidal nanoparticles with dimensions of the order of tens of nanometres is uncommon. Such nanoparticles exhibit size- and shape-dependent optical, electronic and magnetic properties, and their assemblies show new collective properties. At present, nanoparticle patterning is limited to the generation of two-patch nanoparticles, and nanoparticles with surface ripples or a ‘raspberry’ surface morphology. Here we demonstrate nanoparticle surface patterning, which utilizes thermodynamically driven segregation of polymer ligands from a uniform polymer brush into surface-pinned micelles following a change in solvent quality. Patch formation is reversible but can be permanently preserved using a photocrosslinking step. The methodology offers the ability to control the dimensions of patches, their spatial distribution and the number of patches per nanoparticle, in agreement with a theoretical model. The versatility of the strategy is demonstrated by patterning nanoparticles with different dimensions, shapes and compositions, tethered with various types of polymers and subjected to different external stimuli. These patchy nanocolloids have potential applications in fundamental research, the self-assembly of nanomaterials, diagnostics, sensing and colloidal stabilization.

Design of a hydraulic bending machine

Treesearch

Steven G. Hankel; Marshall Begel

2004-01-01

To keep pace with customer demands while phasing out old and unserviceable test equipment, the staff of the Engineering Mechanics Laboratory (EML) at the USDA Forest Service, Forest Products Laboratory, designed and assembled a hydraulic bending test machine. The EML built this machine to test dimension lumber, nominal 2 in. thick and up to 12 in. deep, at spans up to...

Globalization and the Inward Flow of Immigrants: Issues Associated with the Inpatriation of Global Managers

ERIC Educational Resources Information Center

Harvey, Michael; Kiessling, Tim; Moeller, Miriam

2011-01-01

Assembling a diverse global workforce is becoming a critical dimension in gaining successful global performance. In the past, staffing has focused on control of the multinational organization as the primary goal when staffing overseas positions. As organizations globalize their operations, the goal of staffing is shifting from control to…

Validation of the U.S. NRC NGNP evaluation model with the HTTR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saller, T.; Seker, V.; Downar, T.

2012-07-01

The High Temperature Test Reactor (HTTR) was modeled with TRITON/PARCS. Traditional light water reactor (LWR) homogenization methods rely on the short mean free paths of neutrons in LWR. In gas-cooled, graphite-moderated reactors like the HTTR neutrons have much longer mean free paths and penetrate further into neighboring assemblies than in LWRs. Because of this, conventional lattice calculations with a single assembly may not be valid. In addition to difficulties caused by the longer mean free paths, the HTTR presents unique axial and radial heterogeneities that require additional modifications to the single assembly homogenization method. To handle these challenges, the homogenizationmore » domain is decreased while the computational domain is increased. Instead of homogenizing a single hexagonal fuel assembly, the assembly is split into six triangles on the radial plane and five blocks axially in order to account for the placement of burnable poisons. Furthermore, the radial domain is increased beyond a single fuel assembly to account for spectrum effects from neighboring fuel, reflector, and control rod assemblies. A series of five two-dimensional cases, each closer to the full core, were calculated to evaluate the effectiveness of the homogenization method and cross-sections. (authors)« less

Quality of Life in Rural Communities: Residents Living Near to Tembeling, Pahang and Muar Rivers, Malaysia.

PubMed

Idris, Khairuddin; Mohamed Shaffril, Hayrol Azril; Md Yassin, Sulaiman; Abu Samah, Asnarulkhadi; Hamzah, Azimi; Abu Samah, Bahaman

2016-01-01

The main aim of this study is to identify the quality of life (QoL) among communities residing near the Tembeling, Pahang and Muar Rivers in Malaysia. This quantitative study used a constructed questionnaire as main tool to collect data on the QoL of river communities. A total of 240 villagers were selected as respondents. The results indicated that the dimensions of settlement, safety, involvement and social relationships, as well as education scored highest, while dimensions of physical environment, financial and job security yielded moderate scores. Dimensions of infrastructure facilities yielded a low mean score. Recommendations are provided, in the hope that our results may be useful for strategies that could enhance QoL of these river communities.

Self Assembly of Hard, Space-Filling Polytopes

NASA Astrophysics Data System (ADS)

Schultz, Benjamin; Damasceno, Pablo; Engel, Michael; Glotzer, Sharon

2012-02-01

The thermodynamic behavior of systems of hard particles in the limit of infinite pressure is known to yield the densest possible packing [1,2]. Hard polytopes that tile or fill space in two or three spatial dimensions are guaranteed to obtain packing fractions of unity in the infinite pressure limit. Away from this limit, however, other structures may be possible [3]. We present the results of a simulation study of the thermodynamic self-assembly of hard, space-filling particles from disordered initial conditions. We show that for many polytopes, the infinite pressure structure readily assembles at intermediate pressures and packing fractions significantly less than one; in others, assembly of the infinite pressure structure is foiled by mesophases, jamming and phase separation. Common features of these latter systems are identified and strategies for enhancing assembly of the infinite pressure structure at intermediate pressures through building block modification are discussed.[4pt] [1] P. F. Damasceno, M. Engel, S.C. Glotzer arXiv:1109.1323v1 [cond-mat.soft][0pt] [2] A. Haji-Akbari, M. Engel, S.C. Glotzer arXiv:1106.4765v2 [cond-mat.soft][0pt] [3] U. Agarwal, F.A. Escobedo, Nature Materials 10, 230--235 (2011)

Colloidal assembly directed by virtual magnetic moulds

NASA Astrophysics Data System (ADS)

Demirörs, Ahmet F.; Pillai, Pramod P.; Kowalczyk, Bartlomiej; Grzybowski, Bartosz A.

2013-11-01

Interest in assemblies of colloidal particles has long been motivated by their applications in photonics, electronics, sensors and microlenses. Existing assembly schemes can position colloids of one type relatively flexibly into a range of desired structures, but it remains challenging to produce multicomponent lattices, clusters with precisely controlled symmetries and three-dimensional assemblies. A few schemes can efficiently produce complex colloidal structures, but they require system-specific procedures. Here we show that magnetic field microgradients established in a paramagnetic fluid can serve as `virtual moulds' to act as templates for the assembly of large numbers (~108) of both non-magnetic and magnetic colloidal particles with micrometre precision and typical yields of 80 to 90 per cent. We illustrate the versatility of this approach by producing single-component and multicomponent colloidal arrays, complex three-dimensional structures and a variety of colloidal molecules from polymeric particles, silica particles and live bacteria and by showing that all of these structures can be made permanent. In addition, although our magnetic moulds currently resemble optical traps in that they are limited to the manipulation of micrometre-sized objects, they are massively parallel and can manipulate non-magnetic and magnetic objects simultaneously in two and three dimensions.

Investigation on the reflector/moderator geometry and its effect on the neutron beam design in BNCT.

PubMed

Kasesaz, Y; Rahmani, F; Khalafi, H

2015-12-01

In order to provide an appropriate neutron beam for Boron Neutron Capture Therapy (BNCT), a special Beam Shaping Assembly (BSA) must be designed based on the neutron source specifications. A typical BSA includes moderator, reflector, collimator, thermal neutron filter, and gamma filter. In common BSA, the reflector is considered as a layer which covers the sides of the moderator materials. In this paper, new reflector/moderator geometries including multi-layer and hexagonal lattice have been suggested and the effect of them has been investigated by MCNP4C Monte Carlo code. It was found that the proposed configurations have a significant effect to improve the thermal to epithermal neutron flux ratio which is an important neutron beam parameter. Copyright © 2015 Elsevier Ltd. All rights reserved.

De Novo Genome and Transcriptome Assembly of the Canadian Beaver (Castor canadensis).

PubMed

Lok, Si; Paton, Tara A; Wang, Zhuozhi; Kaur, Gaganjot; Walker, Susan; Yuen, Ryan K C; Sung, Wilson W L; Whitney, Joseph; Buchanan, Janet A; Trost, Brett; Singh, Naina; Apresto, Beverly; Chen, Nan; Coole, Matthew; Dawson, Travis J; Ho, Karen; Hu, Zhizhou; Pullenayegum, Sanjeev; Samler, Kozue; Shipstone, Arun; Tsoi, Fiona; Wang, Ting; Pereira, Sergio L; Rostami, Pirooz; Ryan, Carol Ann; Tong, Amy Hin Yan; Ng, Karen; Sundaravadanam, Yogi; Simpson, Jared T; Lim, Burton K; Engstrom, Mark D; Dutton, Christopher J; Kerr, Kevin C R; Franke, Maria; Rapley, William; Wintle, Richard F; Scherer, Stephen W

2017-02-09

The Canadian beaver ( Castor canadensis ) is the largest indigenous rodent in North America. We report a draft annotated assembly of the beaver genome, the first for a large rodent and the first mammalian genome assembled directly from uncorrected and moderate coverage (< 30 ×) long reads generated by single-molecule sequencing. The genome size is 2.7 Gb estimated by k-mer analysis. We assembled the beaver genome using the new Canu assembler optimized for noisy reads. The resulting assembly was refined using Pilon supported by short reads (80 ×) and checked for accuracy by congruency against an independent short read assembly. We scaffolded the assembly using the exon-gene models derived from 9805 full-length open reading frames (FL-ORFs) constructed from the beaver leukocyte and muscle transcriptomes. The final assembly comprised 22,515 contigs with an N50 of 278,680 bp and an N50-scaffold of 317,558 bp. Maximum contig and scaffold lengths were 3.3 and 4.2 Mb, respectively, with a combined scaffold length representing 92% of the estimated genome size. The completeness and accuracy of the scaffold assembly was demonstrated by the precise exon placement for 91.1% of the 9805 assembled FL-ORFs and 83.1% of the BUSCO (Benchmarking Universal Single-Copy Orthologs) gene set used to assess the quality of genome assemblies. Well-represented were genes involved in dentition and enamel deposition, defining characteristics of rodents with which the beaver is well-endowed. The study provides insights for genome assembly and an important genomics resource for Castoridae and rodent evolutionary biology. Copyright © 2017 Lok et al.

De Novo Genome and Transcriptome Assembly of the Canadian Beaver (Castor canadensis)

PubMed Central

Lok, Si; Paton, Tara A.; Wang, Zhuozhi; Kaur, Gaganjot; Walker, Susan; Yuen, Ryan K. C.; Sung, Wilson W. L.; Whitney, Joseph; Buchanan, Janet A.; Trost, Brett; Singh, Naina; Apresto, Beverly; Chen, Nan; Coole, Matthew; Dawson, Travis J.; Ho, Karen; Hu, Zhizhou; Pullenayegum, Sanjeev; Samler, Kozue; Shipstone, Arun; Tsoi, Fiona; Wang, Ting; Pereira, Sergio L.; Rostami, Pirooz; Ryan, Carol Ann; Tong, Amy Hin Yan; Ng, Karen; Sundaravadanam, Yogi; Simpson, Jared T.; Lim, Burton K.; Engstrom, Mark D.; Dutton, Christopher J.; Kerr, Kevin C. R.; Franke, Maria; Rapley, William; Wintle, Richard F.; Scherer, Stephen W.

2017-01-01

The Canadian beaver (Castor canadensis) is the largest indigenous rodent in North America. We report a draft annotated assembly of the beaver genome, the first for a large rodent and the first mammalian genome assembled directly from uncorrected and moderate coverage (< 30 ×) long reads generated by single-molecule sequencing. The genome size is 2.7 Gb estimated by k-mer analysis. We assembled the beaver genome using the new Canu assembler optimized for noisy reads. The resulting assembly was refined using Pilon supported by short reads (80 ×) and checked for accuracy by congruency against an independent short read assembly. We scaffolded the assembly using the exon–gene models derived from 9805 full-length open reading frames (FL-ORFs) constructed from the beaver leukocyte and muscle transcriptomes. The final assembly comprised 22,515 contigs with an N50 of 278,680 bp and an N50-scaffold of 317,558 bp. Maximum contig and scaffold lengths were 3.3 and 4.2 Mb, respectively, with a combined scaffold length representing 92% of the estimated genome size. The completeness and accuracy of the scaffold assembly was demonstrated by the precise exon placement for 91.1% of the 9805 assembled FL-ORFs and 83.1% of the BUSCO (Benchmarking Universal Single-Copy Orthologs) gene set used to assess the quality of genome assemblies. Well-represented were genes involved in dentition and enamel deposition, defining characteristics of rodents with which the beaver is well-endowed. The study provides insights for genome assembly and an important genomics resource for Castoridae and rodent evolutionary biology. PMID:28087693

Tools and methods for automated assembly of miniaturized gear systems

NASA Astrophysics Data System (ADS)

Nienhaus, Matthias; Ehrfeld, Wolfgang; Berg, Udo; Schmitz, Felix; Soultan, H.

2000-10-01

The assembly of gear systems with the size of a pin head is almost beyond the bound of human tactile skills. The magic formula for series fabrication of this hybrid micro systems is the automation of the assembly process. As a contribution, this paper presents and discusses three different assembly methods comprising specifically developed tools for different types of planetary gears with outer diameters of 1.9 mm. Because of the huge importance for the complete micro assembly process, particular attention will be dedicated to the feeding and magazining of the micro gear components. Starting with metallic gear wheels as bulk good, an extremely miniaturized gear system of the Wolfram type has been automatically assembled by employing the strategy of tolerance compensation movement. As a key component, a modular tong gripper with specifically adapted gripping jaws produced by LIGA technology has been used. Further detailed investigations were spend on handling and assembly of micro injection moulded gear wheels made of POM for a three state planetary gear system. One strategy, following the idea of in situ observation, focuses on the intensive use of electronic pattern recognition. Alternatively, an unusual method based on a novel plastic wafer magazine will be discussed in detail. Hereby the exact position and orientation of injection moulded micro components will be presented from the manufacturing process up to the final micro assembly procedure. By simplifying the moulding of the micro gears as well as their handling, storing and assembly, this method has the potential to revolutionize the series fabrication of products with dimensions in the microscopic range in general.

Apparatus and methods for aligning holes through wheels and spacers and stacking the wheels and spacers to form a turbine rotor

DOEpatents

Berry, Robert Randolph; Palmer, Gene David; Wilson, Ian David

2000-01-01

A gas turbine rotor stacking fixture includes upstanding bolts for reception in aligned bolt holes in superposed aft disk, wheels and spacers and upstanding alignment rods received in openings of the disk, wheels and spacers during the rotor stacking assembly. The axially registering openings enable insertion of thin-walled tubes circumferentially about the rim of the rotor, with tight tolerances to the openings to provide supply and return steam for cooling buckets. The alignment rods have radial dimensions substantially less than their dimensions in a circumferential direction to allow for radial opening misalignment due to thermal expansion, tolerance stack-up and wheel-to-spacer mismatch due to rabbet mechanical growth. The circumferential dimension of the alignment rods affords tightly toleranced alignment of the openings through which the cooling tubes are installed.

Active materials by four-dimension printing

NASA Astrophysics Data System (ADS)

Ge, Qi; Qi, H. Jerry; Dunn, Martin L.

2013-09-01

We advance a paradigm of printed active composite materials realized by directly printing glassy shape memory polymer fibers in an elastomeric matrix. We imbue the active composites with intelligence via a programmed lamina and laminate architecture and a subsequent thermomechanical training process. The initial configuration is created by three-dimension (3D) printing, and then the programmed action of the shape memory fibers creates time dependence of the configuration—the four-dimension (4D) aspect. We design and print laminates in thin plate form that can be thermomechanically programmed to assume complex three-dimensional configurations including bent, coiled, and twisted strips, folded shapes, and complex contoured shapes with nonuniform, spatially varying curvature. The original flat plate shape can be recovered by heating the material again. We also show how the printed active composites can be directly integrated with other printed functionalities to create devices; here we demonstrate this by creating a structure that can assemble itself.

Thinking about thinking: changes in first-year medical students’ metacognition and its relation to performance

PubMed Central

Hong, Wei Han; Vadivelu, Jamunarani; Daniel, Esther Gnanamalar Sarojini; Sim, Joong Hiong

2015-01-01

Background Studies have shown the importance of metacognition in medical education. Metacognitive skills consist of two dimensions: knowledge of metacognition and regulation of metacognition. Aim This study hypothesizes that the knowledge and regulation of metacognition is significantly different at the beginning and end of the academic year, and a correlation exists between the two dimensions of metacognitive skills with academic performance. Methods The Metacognitive Skills Inventory comprising 52 Likert-scale items was administered to 159 first-year medical students at the University of Malaya. Students’ year-end results were used to measure their academic performance. Results A paired sample t-test indicated no significant difference for knowledge of metacognition at the beginning and end of the academic year. A paired sample t-test revealed significant difference for regulation of metacognition at the beginning and end of the academic year. A very strong correlation was found between the two dimensions of metacognition. The correlation between knowledge and regulation of metacognition with students’ academic result was moderate. Conclusions The improvement in students’ metacognitive regulation and the moderate correlation between knowledge and regulation of metacognition with academic performance at the end of the academic year indicate the probable positive influence of the teaching and learning activities in the medical program. PMID:26314338

A prospective evaluation of an interdisciplinary nutrition–rehabilitation program for patients with advanced cancer

PubMed Central

Gagnon, B.; Murphy, J.; Eades, M.; Lemoignan, J.; Jelowicki, M.; Carney, S.; Amdouni, S.; Di Dio, P.; Chasen, M.; MacDonald, N.

2013-01-01

Background Cancer can affect many dimensions of a patient’s life, and in turn, it should be targeted using a multimodal approach. We tested the extent to which an interdisciplinary nutrition–rehabilitation program can improve the well-being of patients with advanced cancer. Methods Between January 10, 2007, and September 29, 2010, 188 patients with advanced cancer enrolled in the 10–12-week program. Body weight, physical function, symptom severity, fatigue dimensions, distress level, coping ability, and overall quality of life were assessed at the start and end of the program. Results Of the enrolled patients, 70% completed the program. Patients experienced strong improvements in the physical and activity dimensions of fatigue (effect sizes: 0.8–1.1). They also experienced moderate reductions in the severity of weakness, depression, nervousness, shortness of breath, and distress (effect sizes: 0.5–0.7), and moderate improvements in Six Minute Walk Test distance, maximal gait speed, coping ability, and quality of life (effect sizes: 0.5–0.7) Furthermore, 77% of patients either maintained or increased their body weight. Conclusions Interdisciplinary nutrition–rehabilitation can be advantageous for patients with advanced cancer and should be considered an integrated part of standard palliative care. PMID:24311946

Heartless and cunning? Intelligence in adolescents with antisocial behavior and psychopathic traits.

PubMed

Allen, Jennifer L; Briskman, Jacqueline; Humayun, Sajid; Dadds, Mark R; Scott, Stephen

2013-12-30

Clinical theory predicts that individuals high in psychopathic traits possess average or above average intelligence; however findings in adult and child samples have been mixed. The present study aimed to investigate (1) the relationship between verbal and nonverbal intelligence and the three dimensions of psychopathy (callous-unemotional (CU) traits, narcissism, impulsivity); and (2) whether these dimensions moderate the association between verbal and nonverbal intelligence and the severity of antisocial behavior. Participants were 361 adolescents aged 9-18 years (68% boys) and their parents, drawn from four samples with different levels of risk for antisocial behavior. Families were disadvantaged and 25% were from an ethnic minority. Verbal intelligence was unrelated to parent-reported CU traits, narcissism or impulsivity after controlling for gender, sociodemographic disadvantage, sample, antisocial behavior and hyperactivity. Narcissism, but not CU traits or impulsivity, was significantly related to lower nonverbal IQ. None of the three psychopathic trait dimensions moderated the relationship between verbal or nonverbal IQ and antisocial behavior. CU traits, narcissism, hyperactivity and inclusion in the very high or high risk samples were significantly related to more severe antisocial behavior. Results contradict the widely held view that psychopathic traits are associated with better than average verbal or nonverbal intelligence. Crown Copyright © 2013 Published by Elsevier Ireland Ltd. All rights reserved.

Aggressive versus Nonaggressive Antisocial Behavior: Distinctive Etiological Moderation by Age

ERIC Educational Resources Information Center

Burt, S. Alexandra; Neiderhiser, Jenae M.

2009-01-01

Research has supported the existence of distinct behavioral patterns, demographic correlates, and etiologic mechanisms for aggressive (AGG) versus nonaggressive but delinquent (DEL) antisocial behavior. Though behavioral genetic studies have the potential to further crystallize these dimensions, inconsistent results have limited their…

Adding Another Dimension With Holography.

ERIC Educational Resources Information Center

McNair, Rita H.; Rice, Dale R.

1984-01-01

Provides instructions for preparing, processing, and viewing single-beam reflection holograms in science classrooms. Indicates that the process is simple to demonstrate and moderate in cost. A description of the required equipment (optics table, laser, mirrors, lens, filmholder/plateholder, recording materials, and darkroom chemicals/equipment) is…

Leadership and Management Development.

ERIC Educational Resources Information Center

1996

This document contains four papers presented at a symposium on leadership and management development moderated by Mark Porter at the 1996 conference of the Academy of Human Resource Development (AHRD). "Expanding Formative Experiences: A Critical Dimension of Leadership Deportment" (Gary D. Geroy, Jackie L. Jankovich) advocates focusing…

Micromotors with Step-Motor Characteristics by Controlled Magnetic Interactions among Assembled Components

PubMed Central

2015-01-01

In this study, we investigated the control of the rotation dynamics of an innovative type of rotary micromotors with desired performances by tuning the magnetic interactions among the assembled micro/nanoscale components. The micromotors are made of metallic nanowires as rotors, patterned magnetic nanodisks as bearings and actuated by external electric fields. The magnetic forces for anchoring the rotors on the bearings play an essential role in the rotation dynamics of the micromotors. By varying the moment, orientation, and dimension of the magnetic components, distinct rotation behaviors can be observed, including repeatable wobbling and rolling in addition to rotation. We understood the rotation behaviors by analytical modeling, designed and realized micromotors with step-motor characteristics. The outcome of this research could inspire the development of high-performance nanomachines assembled from synthetic nanoentities, relevant to nanorobotics, microfluidics, and biomedical research. PMID:25536023

Evaluating print performance of Sn-Ag-Cu lead-free solder pastes used in electronics assembly process

NASA Astrophysics Data System (ADS)

Mallik, S.; Bauer, R.; Hübner, F.; Ekere, N. N.

2011-01-01

Solder paste is the most widely used interconnection material in the electronic assembly process for attaching electronic components/devices directly onto the surface of printed circuit boards, using stencil printing process. This paper evaluates the performance of three different commercially available Sn-Ag-Cu solder pastes formulated with different particle size distributions (PSD), metal content and alloy composition. A series of stencil printing tests were carried out using a specially designed stencil of 75 μm thickness and apertures of 300×300 μm2 dimension and 500 μm pitch sizes. Solder paste printing behaviors were found related to attributes such as slumping and surface tension and printing performance was correlated with metal content and PSD. The results of the study should benefit paste manufacturers and SMT assemblers to improve their products and practices.

Burner systems

DOEpatents

Doherty, Brian J.

1984-07-10

A burner system particularly useful for downhole deployment includes a tubular combustion chamber unit housed within a tubular coolant jacket assembly. The combustion chamber unit includes a monolithic tube of refractory material whose inner surface defines the combustion zone. A metal reinforcing sleeve surrounds and extends the length of the refractory tube. The inner surface of the coolant jacket assembly and outer surface of the combustion chamber unit are dimensioned so that those surfaces are close to one another in standby condition so that the combustion chamber unit has limited freedom to expand with that expansion being stabilized by the coolant jacket assembly so that compression forces in the refractory tube do not exceed about one-half the safe compressive stress of the material; and the materials of the combustion chamber unit are selected to establish thermal gradient parameters across the combustion chamber unit to maintain the refractory tube in compression during combustion system start up and cool down sequences.

Synthesis and self-assembly of amphiphilic polymeric microparticles.

PubMed

Dendukuri, Dhananjay; Hatton, T Alan; Doyle, Patrick S

2007-04-10

We report the synthesis and self-assembly of amphiphilic, nonspherical, polymeric microparticles. Wedge-shaped particles bearing segregated hydrophilic and hydrophobic sections were synthesized in a microfludic channel by polymerizing across laminar coflowing streams of hydrophilic and hydrophobic polymers using continuous flow lithography (CFL). Particle monodispersity was characterized by measuring both the size of the particles formed and the extent of amphiphilicity. The coefficient of variation (COV) was found to be less than 2.5% in all measured dimensions. Particle structure was further characterized by measuring the curvature of the interface between the sections and the extent of cross-linking using FTIR spectroscopy. The amphiphilic particles were allowed to self-assemble in water or at water-oil interfaces. In water, the geometry of the particles enabled the formation of micelle-like structures, while in emulsions, the particles migrated to the oil-water interface and oriented themselves to minimize their surface energy.

Pathway-engineering for highly-aligned block copolymer arrays.

PubMed

Choo, Youngwoo; Majewski, Paweł W; Fukuto, Masafumi; Osuji, Chinedum O; Yager, Kevin G

2017-12-21

While the ultimate driving force in self-assembly is energy minimization and the corresponding evolution towards equilibrium, kinetic effects can also play a very strong role. These kinetic effects, such as trapping in metastable states, slow coarsening kinetics, and pathway-dependent assembly, are often viewed as complications to be overcome. Here, we instead exploit these effects to engineer a desired final nano-structure in a block copolymer thin film, by selecting a particular ordering pathway through the self-assembly energy landscape. In particular, we combine photothermal shearing with high-temperature annealing to yield hexagonal arrays of block copolymer cylinders that are aligned in a single prescribed direction over macroscopic sample dimensions. Photothermal shearing is first used to generate a highly-aligned horizontal cylinder state, with subsequent thermal processing used to reorient the morphology to the vertical cylinder state in a templated manner. Finally, we demonstrate the successful transfer of engineered morphologies into inorganic replicas.

DNA-imprinted polymer nanoparticles with monodispersity and prescribed DNA-strand patterns

NASA Astrophysics Data System (ADS)

Trinh, Tuan; Liao, Chenyi; Toader, Violeta; Barłóg, Maciej; Bazzi, Hassan S.; Li, Jianing; Sleiman, Hanadi F.

2018-02-01

As colloidal self-assembly increasingly approaches the complexity of natural systems, an ongoing challenge is to generate non-centrosymmetric structures. For example, patchy, Janus or living crystallization particles have significantly advanced the area of polymer assembly. It has remained difficult, however, to devise polymer particles that associate in a directional manner, with controlled valency and recognition motifs. Here, we present a method to transfer DNA patterns from a DNA cage to a polymeric nanoparticle encapsulated inside the cage in three dimensions. The resulting DNA-imprinted particles (DIPs), which are 'moulded' on the inside of the DNA cage, consist of a monodisperse crosslinked polymer core with a predetermined pattern of different DNA strands covalently 'printed' on their exterior, and further assemble with programmability and directionality. The number, orientation and sequence of DNA strands grafted onto the polymeric core can be controlled during the process, and the strands are addressable independently of each other.

Mapping of the thermal neutron distribution in the lead block assembly of the PS-211 experiment at CERN, using thermoluminescence and nuclear track detectors.

PubMed

Savvidis, E; Eleftheriadis, C A; Kitis, G

2002-01-01

The main purpose of the TARC (Transmutation by Adiabatic Resonance Crossing) experiment (PS-211), was to demonstrate the possibility to destroy efficiently Long-Lived Fission Fragments (LLFF) in Accelerator Driven Systems (ADS). The experimental set-up which consisted of a lead block with dimensions 3.3 x 3.3 x 3 m3, was installed in a CERN Proton Synchrotron (PS) beam line. The proton beam at 2.5 GeV/c and 3.5 GeV/c, was incident in the centre of the lead block assembly producing neutrons via spallation reactions. In this study, neutron flux measurements are presented in the lead block assembly using thermoluminescence and nuclear track detectors. The results are in good agreement with Monte Carlo calculations as well as with the results of the other methods used in the framework of the TARC experiment.

Palmoplantar psoriasis is associated with greater impairment of health-related quality of life compared to moderate-to-severe plaque psoriasis

PubMed Central

Chung, Jina; Duffin, Kristina Callis; Takeshita, Junko; Shin, Daniel B.; Krueger, Gerald G.; Robertson, Andrew D.; Troxel, Andrea B.; Van Voorhees, Abby S.; Edson-Heredia, Emily; Gelfand, Joel M.

2014-01-01

Background The impact of palmoplantar psoriasis on health-related quality of life (QoL) is largely unknown. Objective To compare clinical characteristics and patient-reported outcomes between patients with palmoplantar psoriasis and moderate-to-severe plaque psoriasis. Methods We conducted a cross-sectional study of patients with plaque psoriasis (N=1,153) and palmoplantar psoriasis (N=66) currently receiving systemic or light treatment for psoriasis. Results Patients with palmoplantar psoriasis were more likely to report Dermatology Life Quality Index scores that correspond to at least a moderate impact on QoL (odds ratio [OR] 2.08; 95% confidence interval [CI], 1.20-3.61); problems with mobility (OR 1.98; 95% CI, 1.10-3.58), self-care (OR 3.12; 95% CI, 1.24-7.86), and usual activities (OR 2.47; 95% CI, 1.44-4.22) on the European Quality of Life-5 Dimensions questionnaire; and heavy topical prescription use of at least twice daily in the preceding week (OR 2.81; 95% CI, 1.63-4.85) than those with plaque psoriasis. Limitations Our assessment tools may not account for all dimensions of health-related QoL affected by palmoplantar disease, and these results may not be generalizable to patients with milder forms of psoriasis. Conclusion Patients with palmoplantar psoriasis suffer from greater health-related QoL impairment and are more likely to report heavy use of topical prescriptions than those with moderate-to-severe plaque psoriasis. PMID:24894455

Chronic low back pain and the transdiagnostic process: How do cognitive and emotional dysregulations contribute to the intensity of risk factors and pain?

PubMed

Le Borgne, Margaux; Boudoukha, Abdel Halim; Petit, Audrey; Roquelaure, Yves

2017-10-01

Based on a transdiagnostic approach, this study assesses the impact of cognitive and emotional processes (difficulties in emotional regulation, impulsiveness, rumination and somatosensory amplification) on the psychological risk factors of chronic low-back pain. The study was carried out with 256 patients with chronic low-back pain. All the variables were assessed through a booklet of 10 validated questionnaires. Multiple regression analysis and moderation analysis were performed. Predictors included in multiple regression models explain 3%-42% (adjusted R 2 ) of the variance in psychological risk factors. Moreover, analyses reveal a significant moderator effect of somatosensory amplification on the link between fear-avoidance beliefs linked to work and pain intensity (F (3;250) =12.33; p=.00), of somatosensory amplification and brooding on the link between depression and functional repercussions (FR) on everyday life (F (3;252) =13.36; p=.000; F (1;252) =12.42; p=.00), of the reflection dimension of rumination on the link between the helplessness dimension of catastrophizing and FRs on sociability (F (3;252) =37.02; p=.00). There is also a moderation analysis with a significant trend concerning the lack of emotional awareness and the difficulties in controlling impulsive behaviours. Our results indicate an important role of some dimensions of difficulties in emotional regulation, somatosensory amplification and rumination in the increase in negative affects and dysfunctional beliefs, and in the links between those psychological risk factors and pain/disability. This study identifies some cognitive and emotional dysregulations substantially involved in work-related chronic pain. This contribute to put in place psychotherapeutic protocols to tackle these deficits and dysregulations in a relevant way. Copyright © 2017 Scandinavian Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

Photoswitchable Janus glycodendrimer micelles as multivalent inhibitors of LecA and LecB from Pseudomonas aeruginosa.

PubMed

Hu, Yingxue; Beshr, Ghamdan; Garvey, Christopher J; Tabor, Rico F; Titz, Alexander; Wilkinson, Brendan L

2017-11-01

The first example of the self-assembly and lectin binding properties of photoswitchable glycodendrimer micelles is reported. Light-addressable micelles were assembled from a library of 12 amphiphilic Janus glycodendrimers composed of variable carbohydrate head groups and hydrophobic tail groups linked to an azobenzene core. Spontaneous association in water gave cylindrical micelles with uniform size distribution as determined by dynamic light scattering (DLS) and small angle neutron scattering (SANS). Trans-cis photoisomerization of the azobenzene dendrimer core was used to probe the self-assembly behaviour and lectin binding properties of cylindrical micelles, revealing moderate-to-potent inhibition of lectins LecA and LecB from Pseudomonas aeruginosa. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

Gigadalton-scale shape-programmable DNA assemblies

NASA Astrophysics Data System (ADS)

Wagenbauer, Klaus F.; Sigl, Christian; Dietz, Hendrik

2017-12-01

Natural biomolecular assemblies such as molecular motors, enzymes, viruses and subcellular structures often form by self-limiting hierarchical oligomerization of multiple subunits. Large structures can also assemble efficiently from a few components by combining hierarchical assembly and symmetry, a strategy exemplified by viral capsids. De novo protein design and RNA and DNA nanotechnology aim to mimic these capabilities, but the bottom-up construction of artificial structures with the dimensions and complexity of viruses and other subcellular components remains challenging. Here we show that natural assembly principles can be combined with the methods of DNA origami to produce gigadalton-scale structures with controlled sizes. DNA sequence information is used to encode the shapes of individual DNA origami building blocks, and the geometry and details of the interactions between these building blocks then control their copy numbers, positions and orientations within higher-order assemblies. We illustrate this strategy by creating planar rings of up to 350 nanometres in diameter and with atomic masses of up to 330 megadaltons, micrometre-long, thick tubes commensurate in size to some bacilli, and three-dimensional polyhedral assemblies with sizes of up to 1.2 gigadaltons and 450 nanometres in diameter. We achieve efficient assembly, with yields of up to 90 per cent, by using building blocks with validated structure and sufficient rigidity, and an accurate design with interaction motifs that ensure that hierarchical assembly is self-limiting and able to proceed in equilibrium to allow for error correction. We expect that our method, which enables the self-assembly of structures with sizes approaching that of viruses and cellular organelles, can readily be used to create a range of other complex structures with well defined sizes, by exploiting the modularity and high degree of addressability of the DNA origami building blocks used.

Gigadalton-scale shape-programmable DNA assemblies.

PubMed

Wagenbauer, Klaus F; Sigl, Christian; Dietz, Hendrik

2017-12-06

Natural biomolecular assemblies such as molecular motors, enzymes, viruses and subcellular structures often form by self-limiting hierarchical oligomerization of multiple subunits. Large structures can also assemble efficiently from a few components by combining hierarchical assembly and symmetry, a strategy exemplified by viral capsids. De novo protein design and RNA and DNA nanotechnology aim to mimic these capabilities, but the bottom-up construction of artificial structures with the dimensions and complexity of viruses and other subcellular components remains challenging. Here we show that natural assembly principles can be combined with the methods of DNA origami to produce gigadalton-scale structures with controlled sizes. DNA sequence information is used to encode the shapes of individual DNA origami building blocks, and the geometry and details of the interactions between these building blocks then control their copy numbers, positions and orientations within higher-order assemblies. We illustrate this strategy by creating planar rings of up to 350 nanometres in diameter and with atomic masses of up to 330 megadaltons, micrometre-long, thick tubes commensurate in size to some bacilli, and three-dimensional polyhedral assemblies with sizes of up to 1.2 gigadaltons and 450 nanometres in diameter. We achieve efficient assembly, with yields of up to 90 per cent, by using building blocks with validated structure and sufficient rigidity, and an accurate design with interaction motifs that ensure that hierarchical assembly is self-limiting and able to proceed in equilibrium to allow for error correction. We expect that our method, which enables the self-assembly of structures with sizes approaching that of viruses and cellular organelles, can readily be used to create a range of other complex structures with well defined sizes, by exploiting the modularity and high degree of addressability of the DNA origami building blocks used.

Conceptual Designing of a Reduced Moderation Pressurized Water Reactor by Use of MVP and MVP-BURN

NASA Astrophysics Data System (ADS)

Kugo, T.

A conceptual design of a seed-blanket assembly PWR core with a complicated geometry and a strong heterogeneity has been carried forward by use of the continuous-energy Monte Carlo method. Through parametric survey calculations by repeated use of MVP and a lattice burn-up calculation by MVP-BURN, a seed-blanket assembly configuration suitable for a concept of RMWR has been established, by evaluating precisely reactivity, a conversion ratio and a coolant void reactivity coefficient in a realistic computation time on a super computer.

Moderation: an alternative to restraint as a mode of weight self-regulation.

PubMed

Stotland, S

2012-12-01

This study considered two types of eating and weight self-regulation, in five groups, including four types of weight controllers and one non-dieting group. New scales were developed to measure eating moderation and restraint. Moderation was largely uncorrelated with restraint in 4 groups and had a fairly strong positive relation in 1 group. The moderation scale was unrelated to the Dutch Eating Behavior Questionnaire (DEBQ) restraint scale and the Three Factor Eating Questionnaire (TFEQ) rigid restraint subscale and weakly positively related to TFEQ flexible restraint. The restraint scale was strongly correlated to the DEBQ restraint scale, and to both flexible and rigid restraint subscales of the TFEQ. Across the five groups, moderation had exclusively positive relationships with attitude, behavior and emotion variables, while restraint had primarily negative relationships. The study supports moderation as a new dimension of weight self-regulation, independent of restraint. The new measures of moderation and restraint can be used together in research on the processes of change in weight management. Copyright © 2012 Elsevier Ltd. All rights reserved.

Patient safety culture perceptions in the college of dentistry

PubMed Central

Al Sweleh, Fahad Saleh; Al Saedan, Abdullah Mohammed; Al Dayel, Omar Abdullah

2018-01-01

Abstract A positive safety culture is essential to patient safety because it improves quality of care. The aim of this study was to assess staff and student perceptions of the patient safety culture in the clinics of the College of Dentistry at King Saud University in Saudi Arabia. A cross-sectional study was conducted in the College of Dentistry at King Saud University in Saudi Arabia. It included 4th and 5th year students, interns, general practitioners, and dental assistants. The data were collected by using paper-based questionnaire of modified version of the Agency for Healthcare Research and Quality Hospital Survey on Patient Safety Culture. Data were entered into SPSS Version 20. Score on a particular safety culture dimension was calculated. The overall response rate was 72.8% (390/536). Team work dimension had the highest average percent positive dimension score (72.3%) while staffing had the lowest score (10%). Dental assistant had high agreement in Teamwork dimension (87.8%); Supervisor/Manager Expectations and Actions Promoting Patient Safety dimension (66.9%); Organizational Learning—Continuous Improvement dimension (79.1%); Management Support for Patient Safety dimension (84.5%); Feedback and Communication About Error dimension (58.3%); Frequency of Events Reported dimension (54.0%); Teamwork Across Units dimension (73.2%). Most of areas perceived that there is no event reported (76.1-85.3%) in the past 12 months. Overall patient safety grade is more than moderate in the clinic. Teamwork within Units and Organizational Learning—Continuous Improvement dimension had the highest score while staffing had the lowest score. Dental assistants perceived positive score in most dimensions while students perceived slight negative score in most dimensions. PMID:29480849

Extraversion and openness to experience moderate the relationship between orthodontic treatment need and oral health-related quality of life in adolescents: A cross-sectional study.

PubMed

Aydoğan, Cihan

2018-05-22

To investigate the effects of personality traits to moderate the relationships between orthodontic treatment need and oral health-related quality of life (OHRQoL) in adolescents. A cross-sectional study was performed that included 230 subjects (125 girls and 105 boys) aged 11-14 years. Orthodontic treatment need was measured using the Index of Complexity, Outcome and Need (ICON). The Child Perceptions Questionnaire, the Basic Personality Traits Inventory (BPTI), and the Revised Life Orientation Test were used to assess the OHRQoL, basic personality dimensions, and dispositional optimism respectively. Potential moderation effects were evaluated with Spearman's correlations and multiple regression analyses. There were weak correlations between orthodontic treatment need and quality of life with social and emotional well-being dimensions ( r = 0.238, r = 0.296 and r = 0.209). A moderating effect of extraversion was observed in the relationship between orthodontic treatment need and OHRQoL, emotional well-being, and social well-being (SWB) (Δ R 2 = 0.03, Δ R 2 = 0.02, and Δ R 2 = 0.04, respectively). Openness to experience affected relationships between orthodontic treatment need and OHRQoL, and emotional well-being (EWB) (Δ R 2 = 0.03 and Δ R 2 = 0.04, respectively). In children with higher extraversion, the increase in ICON scores resulted in less increase in CPQ total, EWB, and SWB scores. In children with higher openness to experience, the increase influenced CPQ total and EWB scores similarly. The relationship between orthodontic treatment need and quality of life is moderated by personality traits. Early adolescents with higher extraversion and openness to experience are less affected by increased orthodontic treatment need.

A Hierarchical Causal Taxonomy of Psychopathology across the Life Span

PubMed Central

Lahey, Benjamin B.; Krueger, Robert F.; Rathouz, Paul J.; Waldman, Irwin D.; Zald, David H.

2016-01-01

We propose a taxonomy of psychopathology based on patterns of shared causal influences identified in a review of multivariate behavior genetic studies that distinguish genetic and environmental influences that are either common to multiple dimensions of psychopathology or unique to each dimension. At the phenotypic level, first-order dimensions are defined by correlations among symptoms; correlations among first-order dimensions similarly define higher-order domains (e.g., internalizing or externalizing psychopathology). We hypothesize that the robust phenotypic correlations among first-order dimensions reflect a hierarchy of increasingly specific etiologic influences. Some nonspecific etiologic factors increase risk for all first-order dimensions of psychopathology to varying degrees through a general factor of psychopathology. Other nonspecific etiologic factors increase risk only for all first-order dimensions within a more specific higher-order domain. Furthermore, each first-order dimension has its own unique causal influences. Genetic and environmental influences common to family members tend to be nonspecific, whereas environmental influences unique to each individual are more dimension-specific. We posit that these causal influences on psychopathology are moderated by sex and developmental processes. This causal taxonomy also provides a novel framework for understanding the heterogeneity of each first-order dimension: Different persons exhibiting similar symptoms may be influenced by different combinations of etiologic influences from each of the three levels of the etiologic hierarchy. Furthermore, we relate the proposed causal taxonomy to transdimensional psychobiological processes, which also impact the heterogeneity of each psychopathology dimension. This causal taxonomy implies the need for changes in strategies for studying the etiology, psychobiology, prevention, and treatment of psychopathology. PMID:28004947

Exploratory Study of Dimensions of Health-related Quality of Life in the General Population of South Korea.

PubMed

Kim, Seon-Ha; Jo, Min-Woo; Ock, Minsu; Lee, Sang-Il

2017-11-01

This study aimed to explore dimensions in addition to the 5 dimensions of the 5-level EQ-5D version (EQ-5D-5L) that could satisfactorily explain variation in health-related quality of life (HRQoL) in the general population of South Korea. Domains related to HRQoL were searched through a review of existing HRQoL instruments. Among the 28 potential dimensions, the 5 dimensions of the EQ-5D-5L and 7 additional dimensions (vision, hearing, communication, cognitive function, social relationships, vitality, and sleep) were included. A representative sample of 600 subjects was selected for the survey, which was administered through face-to-face interviews. Subjects were asked to report problems in 12 health dimensions at 5 levels, as well as their self-rated health status using the EuroQol visual analogue scale (EQ-VAS) and a 5-point Likert scale. Among subjects who reported no problems for any of the parameters in the EQ-5D-5L, we analyzed the frequencies of problems in the additional dimensions. A linear regression model with the EQ-VAS as the dependent variable was performed to identify additional significant dimensions. Among respondents who reported full health on the EQ-5D-5L (n=365), 32% reported a problem for at least 1 additional dimension, and 14% reported worse than moderate self-rated health. Regression analysis revealed a R2 of 0.228 for the original EQ-5D-5L dimensions, 0.200 for the new dimensions, and 0.263 for the 12 dimensions together. Among the added dimensions, vitality and sleep were significantly associated with EQ-VAS scores. This study identified significant dimensions for assessing self-rated health among members of the general public, in addition to the 5 dimensions of the EQ-5D-5L. These dimensions could be considered for inclusion in a new preference-based instrument or for developing a country-specific HRQoL instrument.

Time changes in the body dimensions of male Australian Army personnel between 1977 and 2012.

PubMed

Tomkinson, Grant R; Daniell, Nathan; Fulton, Ashley; Furnell, Alistair

2017-01-01

The aim of this study was to quantify time changes in the body dimensions of male Australian Army personnel. Following a systematic review, two studies were identified and matched for occupation and age (n = 669) with time changes in 12 absolute and 11 proportional body dimensions assessed between 1977 and 2010-12. Changes in means were expressed as absolute, percent and standardised changes, with changes in variability assessed visually and as the ratio of coefficients of variation (CVs). Time changes in absolute dimensions were typically positive (increases) and moderate in magnitude (median standardised change ± 95%CI: 0.53 ± 0.23), and while changes in proportional dimensions were typically negligible (median standardised change ± 95%CI: 0.16 ± 0.33), substantial changes (standardised changes ≥0.2 or ≤-0.2) were observed in several dimensions. Variability in body dimensions has also typically increased (median ratio of CVs ± 95%CI: 1.10 ± 0.07) and become more right-skewed. These findings have important implications for the design and acquisition of new military vehicles, body equipment and clothing. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

Everyday distinction and omnivorous orientation: An analysis of food choice, attitudinal dispositions and social background.

PubMed

Kahma, Nina; Niva, Mari; Helakorpi, Satu; Jallinoja, Piia

2016-01-01

In recent years studies on cultural consumption have experienced a Bourdieusian renaissance. This is indicated by a growing body of research analysing distinctions in different areas of culture, and numerous studies on the homology thesis applying the concepts of distinction, field and capital. Concurrently, however, it has been argued that instead of distinctive tastes, distinction and class status are increasingly manifested by cultural omnivorousness. For a good part studies focussing on distinction in food have analysed eating out and stylization through restaurant preferences, rather than everyday food choices. In this article we investigate everyday food choices from the perspective of distinction and omnivorousness. Our analysis draws on cross-sectional quantitative data collected in 2012 among 15-64-year-old Finns (N = 2601). The article maps out the relationship between food choice frequencies, dispositions and social background with Multiple Correspondence Analysis (MCA). The results show that the consumption of fruit and vegetables, ready-meals and convenience foods were among the most divisive food choices. The first structuring dimension juxtaposed processed, fatty and sugared foods with unprocessed foods and fresh ingredients. This dimension was associated with healthiness and weight control as dispositions. On the second structuring dimension there were differences in the valuation of taste, pleasure and sociability, and a contrast between moderate and restrictive choices. Particularly the first dimension was associated with educational, occupational, and gender differences. Distinction within everyday food choices was manifested in the use of healthy and unprocessed foods and 'moderate hedonism' in contrast to more restrictive tastes. Copyright © 2015 Elsevier Ltd. All rights reserved.

The differential relationships of dimensions of perceived social support with cognitive function among older adults.

PubMed

Pillemer, Sarah C; Holtzer, Roee

2016-07-01

Research has extensively examined the relationship of social support and cognition. Theories on social support suggest that it is a multidimensional construct including perceptions, actual assistance, and level of integration into a social network. Little is known, however, about the differential associations between distinct dimensions of perceived social support and cognition. This study examined whether four empirically validated dimensions of perceived social support were differentially related to cognitive function in aging, and whether this association was moderated by gender. The sample included 355 community-residing older adults (mean age = 77 years; %female = 55) enrolled in a longitudinal cohort study. Social support was assessed using the Medical Outcomes Study-Social Support Survey. Cognition was assessed using the Repeatable Battery for the Assessment of Neuropsychological Status (RBANS). Principal component analysis yielded four factors capturing different dimensions of social support: emotional/informational support, positive social interaction, tangible support, and affectionate support. Linear regression analyses revealed that both perceived emotional/informational support (beta = 1.41, p = 0.03; 95% Confidence Interval (CI) = .156-2.669) and positive social interaction (beta = 1.71, p = 0.01; 95% CI = .428-2.988) were significantly associated with RBANS total index score. Further analyses revealed that gender moderated the relationship between emotional/informational support (beta = 1.266, p = 0.04), demonstrating that higher levels of perceived emotional support were associated with higher index scores in females but not in males. The associations between perceived emotional/informational support and positive social interaction suggest that social engagement may be an important target for intervention procedures for individuals at risk of cognitive decline and dementia.

Surface chemistry from wettability and charge for the control of mesenchymal stem cell fate through self-assembled monolayers.

PubMed

Hao, Lijing; Fu, Xiaoling; Li, Tianjie; Zhao, Naru; Shi, Xuetao; Cui, Fuzhai; Du, Chang; Wang, Yingjun

2016-12-01

Self-assembled monolayers (SAMs) of alkanethiols on gold are highly controllable model substrates and have been employed to mimic the extracellular matrix for cell-related studies. This study aims to systematically explore how surface chemistry influences the adhesion, morphology, proliferation and osteogenic differentiation of mouse mesenchymal stem cells (mMSCs) using various functional groups (-OEG, -CH 3 , -PO 3 H 2 , -OH, -NH 2 and -COOH). Surface analysis demonstrated that these functional groups produced a wide range of wettability and charge: -OEG (hydrophilic and moderate iso-electric point (IEP)), -CH 3 (strongly hydrophobic and low IEP), -PO 3 H 2 (moderate wettability and low IEP), -OH (hydrophilic and moderate IEP), -NH 2 (moderate wettability and high IEP) and -COOH (hydrophilic and low IEP). In terms of cell responses, the effect of wettability may be more influential than charge for these groups. Moreover, compared to -OEG and -CH 3 groups, -PO 3 H 2 , -OH, -NH 2 and -COOH functionalities tended to promote not only cell adhesion, proliferation and osteogenic differentiation but also the expression of α v and β 1 integrins. This finding indicates that the surface chemistry may guide mMSC activities through α v and β 1 integrin signaling pathways. Model surfaces with controllable chemistry may provide insight into biological responses to substrate surfaces that would be useful for the design of biomaterial surfaces. Copyright © 2016 Elsevier B.V. All rights reserved.

Multidimensional Perfectionism and Burnout: A Meta-Analysis.

PubMed

Hill, Andrew P; Curran, Thomas

2016-08-01

A meta-analysis of research examining the relationships between multidimensional perfectionism and burnout is provided. In doing so, relationships before and after controlling for the relationship between dimensions of perfectionism were examined along with whether relationships were moderated by domain (work, sport, or education). A literature search yielded 43 studies (N = 9,838) and 663 effect sizes. Meta-analysis using random-effects models revealed that perfectionistic strivings had small negative or non-significant relationships with overall burnout and symptoms of burnout. By contrast, perfectionistic concerns displayed medium-to-large and medium positive relationships with overall burnout and symptoms of burnout. After controlling for the relationship between dimensions of perfectionism, "pure" perfectionistic strivings displayed notably larger negative relationships. In terms of moderation, in some cases, perfectionistic strivings were less adaptive and perfectionistic concerns more maladaptive in the work domain. Future research should examine explanatory mechanisms, adopt longitudinal designs, and develop interventions to reduce perfectionistic concerns fueled burnout. © 2015 by the Society for Personality and Social Psychology, Inc.

Social representations of genetically modified foods and public willingness to consume such foods in Taiwan.

PubMed

Chen, Mei-Fang

2018-04-20

This study highlighted the relevance of how social representations of genetically modified (GM) foods influence the Taiwanese public's willingness to consume GM foods. Moderated regression analysis results revealed that the social representation dimensions of adherence to technology and food as a necessity positively influenced the public's willingness to consume GM foods; however, the dimension of resistance to and suspicion of novelties had a negative influence. Food technology neophobia played a role in predicting people's willingness to consume GM foods and exerted moderating effects to enhance the negative relationship between the respondents' resistance to and suspicion of novelties and their willingness to consume GM foods. This neophobia also changed the positive relationship between food as a necessity and willingness to consume GM foods into negative. One-way ANOVA results revealed that food technology neophobia influences the public's specific social representations of GM foods, personal domain-specific innovativeness, and willingness to consume GM foods. This article is protected by copyright. All rights reserved.

Configurations and Dynamics of Semi-Flexible Polymers in Good and Poor Solvents

NASA Astrophysics Data System (ADS)

Larson, Ronald

We develop coarse-graining procedures for determining the conformational and dynamic behavior of semi-flexible chains with and without flow using Brownian dynamics (BD) simulations that are insensitive to the degree of coarse-graining. In the absence of flow, in a poor solvent, we find three main collapsed states: torus, bundle, and globule over a range of dimensionless ratios of the three energy parameters, namely solvent-polymer surface energy, energy of polymer folds, and polymer bending energy or persistence length. A theoretical phase diagram, confirmed by BD simulations, captures the general phase behavior of a single long chain (>10 Kuhn lengths) at moderately high (order unity) dimensionless temperature, which is the ratio of thermal energy to the attractive interaction between neighboring monomers. We also find converged results for polymer conformations in shear or extensional flow in solvents of various qualities and determine scaling laws for chain dimensions for low, moderate, and high Weissenberg numbers Wi. We also derive scaling laws to describe chains dimensions and tumbling rates in these regimes.

Optimism and well-being: a prospective multi-method and multi-dimensional examination of optimism as a resilience factor following the occurrence of stressful life events.

PubMed

Kleiman, Evan M; Chiara, Alexandra M; Liu, Richard T; Jager-Hyman, Shari G; Choi, Jimmy Y; Alloy, Lauren B

2017-02-01

Optimism has been conceptualised variously as positive expectations (PE) for the future , optimistic attributions , illusion of control , and self-enhancing biases. Relatively little research has examined these multiple dimensions of optimism in relation to psychological and physical health. The current study assessed the multi-dimensional nature of optimism within a prospective vulnerability-stress framework. Initial principal component analyses revealed the following dimensions: PEs, Inferential Style (IS), Sense of Invulnerability (SI), and Overconfidence (O). Prospective follow-up analyses demonstrated that PE was associated with fewer depressive episodes and moderated the effect of stressful life events on depressive symptoms. SI also moderated the effect of life stress on anxiety symptoms. Generally, our findings indicated that optimism is a multifaceted construct and not all forms of optimism have the same effects on well-being. Specifically, our findings indicted that PE may be the most relevant to depression, whereas SI may be the most relevant to anxiety.

Fabrication of microgrooves with excimer laser ablation techniques for plastic optical fiber array alignment purposes

NASA Astrophysics Data System (ADS)

Naessens, Kris; Van Hove, An; Coosemans, Thierry; Verstuyft, Steven; Ottevaere, Heidi; Vanwassenhove, Luc; Van Daele, Peter; Baets, Roel G.

2000-06-01

Laser ablation is extremely well suited for rapid prototyping and proves to be a versatile technique delivering high accuracy dimensioning and repeatability of features in a wide diversity of materials. In this paper, we present laser ablation as a fabrication method for micro machining in of arrays consisting of precisely dimensioned U-grooves in dedicated polycarbonate and polymethylmetacrylate plates. The dependency of the performance on various parameters is discussed. The fabricated plates are used to hold optical fibers by means of a UV-curable adhesive. Stacking and gluing of the plates allows the assembly of a 2D connector of plastic optical fibers for short distance optical interconnects.

Perception of safety is a prerequisite for the association between neighbourhood green qualities and physical activity: Results from a cross-sectional study in Sweden.

PubMed

Weimann, Hanna; Rylander, Lars; van den Bosch, Matilda Annerstedt; Albin, Maria; Skärbäck, Erik; Grahn, Patrik; Björk, Jonas

2017-05-01

In this study, we assess how the Scania Green Score (SGS5), and the five distinct perceived neighbourhood green dimensions within this area-aggregated index (1km 2 squares), is associated with self-reported physical activity and general health, and if perceived safety and social coherence has a moderating effect. Two independent surveys, both conducted in Scania, Sweden, was used for data on SGS5 and health outcomes (N=28 198 and N=23 693), respectively. SGS5 was more clearly associated with physical activity (OR 1.06; 95% CI 1.02-1.10) than with general health (OR 1.02; 95% CI 1.00-1.04). This association was moderated by safety (p for interaction <0.001); SGS5 was positively associated with physical activity only among individuals who perceived high safety in their neighbourhood (OR 1.07; 95% CI 1.02-1.11). No moderating effect was seen for social coherence. Among specific dimensions, cultural history was positively associated with both physical activity and general health. Our results suggest that perception of safety is a prerequisite for the positive effects of neighbourhood green qualities. Copyright © 2017 Elsevier Ltd. All rights reserved.

Bulk assembly of organic metal halide nanotubes

DOE PAGES

Lin, Haoran; Zhou, Chenkun; Tian, Yu; ...

2017-10-16

The organic metal halide hybrids welcome a new member with a one-dimensional (1D) tubular structure. Herein we report the synthesis and characterization of a single crystalline bulk assembly of organic metal halide nanotubes, (C 6H 13N 4) 3Pb 2Br 7. In a metal halide nanotube, six face-sharing metal halide dimers (Pb 2Br 9 5–) connect at the corners to form rings that extend in one dimension, of which the inside and outside surfaces are coated with protonated hexamethylenetetramine (HMTA) cations (C 6H 13N 4 +). This unique 1D tubular structure possesses highly localized electronic states with strong quantum confinement, resultingmore » in the formation of self-trapped excitons that give strongly Stokes shifted broadband yellowish-white emission with a photoluminescence quantum efficiency (PLQE) of ~7%. Finally, having realized single crystalline bulk assemblies of two-dimensional (2D) wells, 1D wires, and now 1D tubes using organic metal halide hybrids, our work significantly advances the research on bulk assemblies of quantum-confined materials.« less

Three-dimensional bioprinting using self-assembling scalable scaffold-free “tissue strands” as a new bioink

PubMed Central

Yu, Yin; Moncal, Kazim K.; Li, Jianqiang; Peng, Weijie; Rivero, Iris; Martin, James A.; Ozbolat, Ibrahim T.

2016-01-01

Recent advances in bioprinting have granted tissue engineers the ability to assemble biomaterials, cells, and signaling molecules into anatomically relevant functional tissues or organ parts. Scaffold-free fabrication has recently attracted a great deal of interest due to the ability to recapitulate tissue biology by using self-assembly, which mimics the embryonic development process. Despite several attempts, bioprinting of scale-up tissues at clinically-relevant dimensions with closely recapitulated tissue biology and functionality is still a major roadblock. Here, we fabricate and engineer scaffold-free scalable tissue strands as a novel bioink material for robotic-assisted bioprinting technologies. Compare to 400 μm-thick tissue spheroids bioprinted in a liquid delivery medium into confining molds, near 8 cm-long tissue strands with rapid fusion and self-assemble capabilities are bioprinted in solid form for the first time without any need for a scaffold or a mold support or a liquid delivery medium, and facilitated native-like scale-up tissues. The prominent approach has been verified using cartilage strands as building units to bioprint articular cartilage tissue. PMID:27346373

New Technical Solution for Vertical Shaft Equipping Using Steel Headframe of Multifunction Purpose

NASA Astrophysics Data System (ADS)

Kassikhina, Elena; Pershin, Vladimir; Glazkov, Yurij

2017-11-01

The article reviews a novel approach to the design of steel angle headframe for vertical shafts of coal and ore mines on the basis of rational design solutions. Practice of construction of coal and ore mines provides application of various designs for steel angle headframes which are divided into separate large assembly blocks and constructive elements during assembling operations. Design of these blocks and elements, their weight and dimensions effect the chose of the method of assembling on which economic and technological indicators, as well as duration of down-time, depend on during performance of construction operations in shaft. The technical solution on equipment provision for mine vertical shaft using headframe of multifunctional purpose will allow changing the management construction of vertical shaft. The constructive design of the headgear allows application of the effective method of assembly and thus to provide improvement of the technical and economic indexes, and high calendar time rate of the shaft construction due to reduction of duration of works on equipment provision for the shaft and to refurbishment of the shaft in order to carry out horizontal mining.

Formation of charge-nanopatterned templates with flexible geometry via layer by layer deposition of polyelectrolytes for directed self-assembly of gold nanoparticles

NASA Astrophysics Data System (ADS)

Sayin, Mustafa; Dahint, Reiner

2017-03-01

Nanostructure formation via self-assembly processes offers a fast and cost-effective approach to generate surface patterns on large lateral scale. In particular, if the high precision of lithographic techniques is not required, a situation typical of many biotechnological and biomedical applications, it may be considered as the method of choice as it does not require any sophisticated instrumentation. However, in many cases the variety and complexity of the surface structures accessible with a single self-assembly based technique is limited. Here, we report on a new approach which combines two different self-assembly strategies, colloidal lithography and layer-by-layer deposition of polyelectrolytes, in order to significantly expand the spectrum of accessible patterns. In particular, flat and donut-like charge-patterned templates have been generated, which facilitate subsequent deposition of gold nanoparticles in dot, grid, ring, out-of-ring and circular patch structures. Potential applications are e.g. in the fields of biofunctional interfaces with well-defined lateral dimensions, optical devices with tuned properties, and controlled three-dimensional material growth.

76 FR 15808 - Airworthiness Directives; The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-22

... ATA, on behalf of its member airline AAL, expressed concern with the measurement requirements of the... with using common maintenance measurement tools to better allow the operator to comply with these... measurement is four decimal places of accuracy (0.XXXX). AAL stated that this dimension is in Boeing Assembly...

[Position of health at international relations. Part II. Organizational dimensions of health].

PubMed

Cianciara, Dorota; Wysocki, Mirosław J

2011-01-01

The aim of this article was: (1) the analysis of some concepts and definitions related with "set up of health", used in UN international arrangements; (2) an attempt to explain the evolution of organizational dimensions of health at worldwide agenda. The following organizational dimensions of health were discussed: (a) health for all, (b) health promotion, intersectoral and multisectoral actions, health in all policies, (c) health development, health as an element of human development, (d) investment for health, (e) health diplomacy and (f) mainstreaming of health. The analysis was based on World Health Assembly and UN General Assembly resolutions as well as supranational reports and statements available through conventional channels, not grey literature. It is apparent that some of notions are not in common use in Poland, some seems to be unknown. It was argued that some general and discreet thoughts and statements concerning organizational aspects of health were expressed in the preamble of WHO Constitution. Nevertheless they are not comparable with later propositions and proceedings. The first modern concepts and notions related as process were developed at late seventies. They originated from efforts to realize a vision of health for all and formulate national policies, strategies and plans of action for attaining this goal. The turning point was in 1981, when WHA adopted Global Strategy for Heath for All by the Year 2000. Since then one can observe considerable progress and new concepts came into existence, more and more precise and better reflecting the sense of health actions. The evolution of organizational dimensions of health was described in the context of brand positioning. It was assumed that first step of positioning was concentrated on structural dimensions of health. That served to awareness raise, attitudes change and motivation to action. That made a foundation to the next step--positioning based on process approach to health. Among others the following processes are described: (a) health for all, (b) health promotion, health in all policies, (c) health development, (d) health diplomacy, and (e) mainstreaming of health.

The self-assembly, aggregation and phase transitions of food protein systems in one, two and three dimensions

NASA Astrophysics Data System (ADS)

Mezzenga, Raffaele; Fischer, Peter

2013-04-01

The aggregation of proteins is of fundamental relevance in a number of daily phenomena, as important and diverse as blood coagulation, medical diseases, or cooking an egg in the kitchen. Colloidal food systems, in particular, are examples that have great significance for protein aggregation, not only for their importance and implications, which touches on everyday life, but also because they allow the limits of the colloidal science analogy to be tested in a much broader window of conditions, such as pH, ionic strength, concentration and temperature. Thus, studying the aggregation and self-assembly of proteins in foods challenges our understanding of these complex systems from both the molecular and statistical physics perspectives. Last but not least, food offers a unique playground to study the aggregation of proteins in three, two and one dimensions, that is to say, in the bulk, at air/water and oil/water interfaces and in protein fibrillation phenomena. In this review we will tackle this very ambitious task in order to discuss the current understanding of protein aggregation in the framework of foods, which is possibly one of the broadest contexts, yet is of tremendous daily relevance.

Adaption of a microwave plasma source for low temperature diamond deposition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ulczynski, M.; Reinhard, D.K.; Asmussen, J.

1996-12-31

This report describes the adaption of a microwave plasma reactor for low temperature diamond deposition. The reactor is of a resonant cavity design. Three approaches have been taken to establish plasma conditions for diamond deposition on substrates which are in the range of 450 C to 550 C. In the first, the substrate is heated only by the plasma and the source is operated at pressures on the order of 10 torr, such that the volumetric power density is sufficiently low to achieve these temperatures. In the second, the plasma pressure and microwave input power were reduced and a substratemore » heater was used to maintain the desired deposition temperatures. In the third approach, the plasma pressure and microwave power were increased and a substrate cooler was used to keep the substrate temperature in the desired range. Reactor performance and deposition results will be described for the three configurations. For the plasma heated substrate assembly, substrate dimensions were up to 10 cm diameter. For the heated and cooled substrate assemblies, substrate dimensions were up to 7.5 cm diameter. Deposition results on a variety of substrates will be reported including low-temperature substrates such as borosilicate glass.« less

Experimental Approaches for Solution X-Ray Scattering and Fiber Diffraction

PubMed Central

Irving, T. C.

2008-01-01

X-ray scattering and diffraction from non-crystalline systems have gained renewed interest in recent years, as focus shifts from the structural chemistry information gained by high-resolution studies to the context of structural physiology at larger length scales. Such techniques permit the study of isolated macromolecules as well as highly organized macromolecular assemblies as a whole under near-physiological conditions. Time-resolved approaches, made possible by advanced synchrotron instrumentation, add a critical dimension to many of these investigations. This article reviews experimental approaches in non-crystalline x-ray scattering and diffraction that may be used to illuminate important scientific questions such as protein/nucleic acid folding and structure-function relationships in large macromolecular assemblies. PMID:18801437

Longitudinal domain wall formation in elongated assemblies of ferromagnetic nanoparticles

PubMed Central

Varón, Miriam; Beleggia, Marco; Jordanovic, Jelena; Schiøtz, Jakob; Kasama, Takeshi; Puntes, Victor F.; Frandsen, Cathrine

2015-01-01

Through evaporation of dense colloids of ferromagnetic ~13 nm ε-Co particles onto carbon substrates, anisotropic magnetic dipolar interactions can support formation of elongated particle structures with aggregate thicknesses of 100–400 nm and lengths of up to some hundred microns. Lorenz microscopy and electron holography reveal collective magnetic ordering in these structures. However, in contrast to continuous ferromagnetic thin films of comparable dimensions, domain walls appear preferentially as longitudinal, i.e., oriented parallel to the long axis of the nanoparticle assemblies. We explain this unusual domain structure as the result of dipolar interactions and shape anisotropy, in the absence of inter-particle exchange coupling. PMID:26416297

Extension of lattice cluster theory to strongly interacting, self-assembling polymeric systems.

PubMed

Freed, Karl F

2009-02-14

A new extension of the lattice cluster theory is developed to describe the influence of monomer structure and local correlations on the free energy of strongly interacting and self-assembling polymer systems. This extension combines a systematic high dimension (1/d) and high temperature expansion (that is appropriate for weakly interacting systems) with a direct treatment of strong interactions. The general theory is illustrated for a binary polymer blend whose two components contain "sticky" donor and acceptor groups, respectively. The free energy is determined as an explicit function of the donor-acceptor contact probabilities that depend, in turn, on the local structure and both the strong and weak interactions.

Printable semiconductor structures and related methods of making and assembling

DOEpatents

Nuzzo, Ralph G.; Rogers, John A.; Menard, Etienne; Lee, Keon Jae; Khang; , Dahl-Young; Sun, Yugang; Meitl, Matthew; Zhu, Zhengtao; Ko, Heung Cho; Mack, Shawn

2013-03-12

The present invention provides a high yield pathway for the fabrication, transfer and assembly of high quality printable semiconductor elements having selected physical dimensions, shapes, compositions and spatial orientations. The compositions and methods of the present invention provide high precision registered transfer and integration of arrays of microsized and/or nanosized semiconductor structures onto substrates, including large area substrates and/or flexible substrates. In addition, the present invention provides methods of making printable semiconductor elements from low cost bulk materials, such as bulk silicon wafers, and smart-materials processing strategies that enable a versatile and commercially attractive printing-based fabrication platform for making a broad range of functional semiconductor devices.

Printable semiconductor structures and related methods of making and assembling

DOEpatents

Nuzzo, Ralph G [Champaign, IL; Rogers, John A [Champaign, IL; Menard, Etienne [Durham, NC; Lee, Keon Jae [Tokyo, JP; Khang, Dahl-Young [Urbana, IL; Sun, Yugang [Westmont, IL; Meitl, Matthew [Raleigh, NC; Zhu, Zhengtao [Rapid City, SD; Ko, Heung Cho [Urbana, IL; Mack, Shawn [Goleta, CA

2011-10-18

The present invention provides a high yield pathway for the fabrication, transfer and assembly of high quality printable semiconductor elements having selected physical dimensions, shapes, compositions and spatial orientations. The compositions and methods of the present invention provide high precision registered transfer and integration of arrays of microsized and/or nanosized semiconductor structures onto substrates, including large area substrates and/or flexible substrates. In addition, the present invention provides methods of making printable semiconductor elements from low cost bulk materials, such as bulk silicon wafers, and smart-materials processing strategies that enable a versatile and commercially attractive printing-based fabrication platform for making a broad range of functional semiconductor devices.

Printable semiconductor structures and related methods of making and assembling

DOEpatents

Nuzzo, Ralph G.; Rogers, John A.; Menard, Etienne; Lee, Keon Jae; Khang, Dahl-Young; Sun, Yugang; Meitl, Matthew; Zhu, Zhengtao; Ko, Heung Cho; Mack, Shawn

2010-09-21

The present invention provides a high yield pathway for the fabrication, transfer and assembly of high quality printable semiconductor elements having selected physical dimensions, shapes, compositions and spatial orientations. The compositions and methods of the present invention provide high precision registered transfer and integration of arrays of microsized and/or nanosized semiconductor structures onto substrates, including large area substrates and/or flexible substrates. In addition, the present invention provides methods of making printable semiconductor elements from low cost bulk materials, such as bulk silicon wafers, and smart-materials processing strategies that enable a versatile and commercially attractive printing-based fabrication platform for making a broad range of functional semiconductor devices.

Layer-by-Layer Assembled Nanotubes as Biomimetic Nanoreactors for Calcium Carbonate Deposition.

PubMed

He, Qiang; Möhwald, Helmuth; Li, Junbai

2009-09-17

Enzyme-loaded magnetic polyelectrolyte multilayer nanotubes prepared by layer-by-layer assembly combined with the porous template could be used as biomimetic nanoreactors. It is demonstrated that calcium carbonate can be biomimetically synthesized inside the cavities of the polyelectrolyte nanotubes by the catalysis of urease, and the size of the calcium carbonate precipitates was controlled by the cavity dimensions. The metastable structure of the calcium carbonate precipitates inside the nanotubes was protected by the outer shell of the polyelectrolyte multilayers. These features may allow polyelectrolyte nanotubes to be applied in the fields of nanomaterials synthesis, controlled release, and drug delivery. Copyright © 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Ultrahigh-density nanowire arrays grown in self-assembled diblock copolymer templates.

PubMed

Thurn-Albrecht, T; Schotter, J; Kästle, G A; Emley, N; Shibauchi, T; Krusin-Elbaum, L; Guarini, K; Black, C T; Tuominen, M T; Russell, T P

2000-12-15

We show a simple, robust, chemical route to the fabrication of ultrahigh-density arrays of nanopores with high aspect ratios using the equilibrium self-assembled morphology of asymmetric diblock copolymers. The dimensions and lateral density of the array are determined by segmental interactions and the copolymer molecular weight. Through direct current electrodeposition, we fabricated vertical arrays of nanowires with densities in excess of 1.9 x 10(11) wires per square centimeter. We found markedly enhanced coercivities with ferromagnetic cobalt nanowires that point toward a route to ultrahigh-density storage media. The copolymer approach described is practical, parallel, compatible with current lithographic processes, and amenable to multilayered device fabrication.

Quality of Life in Rural Communities: Residents Living Near to Tembeling, Pahang and Muar Rivers, Malaysia

PubMed Central

Abu Samah, Asnarulkhadi; Hamzah, Azimi; Abu Samah, Bahaman

2016-01-01

The main aim of this study is to identify the quality of life (QoL) among communities residing near the Tembeling, Pahang and Muar Rivers in Malaysia. This quantitative study used a constructed questionnaire as main tool to collect data on the QoL of river communities. A total of 240 villagers were selected as respondents. The results indicated that the dimensions of settlement, safety, involvement and social relationships, as well as education scored highest, while dimensions of physical environment, financial and job security yielded moderate scores. Dimensions of infrastructure facilities yielded a low mean score. Recommendations are provided, in the hope that our results may be useful for strategies that could enhance QoL of these river communities. PMID:26974837

Social relationships and physician utilization among older adults—A systematic review

PubMed Central

Inhestern, Laura; von dem Knesebeck, Olaf

2017-01-01

Background In older age health needs and demand for health services utilization increase. Individual’s social relationships can play a decisive role regarding the utilization of outpatient health care services. This systematic review examines the associations of structural and functional dimensions of social relationships with outpatient health services use of older adults. Methods The databases PubMed, CINAHL, SocINDEX, PsycINFO, International Bibliography of the Social Sciences (IBSS), Sociological Abstracts, and Applied Social Sciences Index and Abstracts (ASSIA) were searched in February 2016. The methodological and reporting quality of the articles was assessed and the results were synthesized descriptively and systematically. Results Out of 1.392 hits, 36 articles (35 studies) were included in the systematic review. The methodological and reporting quality of the included articles was reasonable. Various structural and functional characteristics of social relationships were associated with the use (yes/no) and the frequency of using outpatient care among older adults. The majority of the associations between structural dimensions of social relationships and the use of physicians were positive and moderate in strength. The associations between functional dimensions of social relationships and the probability of using physician services were inconsistent and varied in strength. For the most part, social relationship variables assigned to the structural dimension were positively and weakly to moderately associated with the frequency of physician visits. Functional aspects of social relationships also tended to have positive associations with the frequency of physician utilization. The associations were weak to moderate in strength. Conclusions Measuring social relationships and their influence on health services use is a challenging methodological endeavor indicated by the inconclusive results. The results suggest that the outpatient care utilization behavior of older individuals being structurally and functionally integrated in social relationships is different to older adults being socially isolated or having no social support. All in all, the current status of quantitative data was insufficient. Future health services research should accentuate social ties in more detail, especially according to quality aspects of social relationships. PMID:28957429

Changes in Dimensionality and Fractal Scaling Suggest Soft-Assembled Dynamics in Human EEG

PubMed Central

Wiltshire, Travis J.; Euler, Matthew J.; McKinney, Ty L.; Butner, Jonathan E.

2017-01-01

Humans are high-dimensional, complex systems consisting of many components that must coordinate in order to perform even the simplest of activities. Many behavioral studies, especially in the movement sciences, have advanced the notion of soft-assembly to describe how systems with many components coordinate to perform specific functions while also exhibiting the potential to re-structure and then perform other functions as task demands change. Consistent with this notion, within cognitive neuroscience it is increasingly accepted that the brain flexibly coordinates the networks needed to cope with changing task demands. However, evaluation of various indices of soft-assembly has so far been absent from neurophysiological research. To begin addressing this gap, we investigated task-related changes in two distinct indices of soft-assembly using the established phenomenon of EEG repetition suppression. In a repetition priming task, we assessed evidence for changes in the correlation dimension and fractal scaling exponents during stimulus-locked event-related potentials, as a function of stimulus onset and familiarity, and relative to spontaneous non-task-related activity. Consistent with predictions derived from soft-assembly, results indicated decreases in dimensionality and increases in fractal scaling exponents from resting to pre-stimulus states and following stimulus onset. However, contrary to predictions, familiarity tended to increase dimensionality estimates. Overall, the findings support the view from soft-assembly that neural dynamics should become increasingly ordered as external task demands increase, and support the broader application of soft-assembly logic in understanding human behavior and electrophysiology. PMID:28919862

Analysis of a water moderated critical assembly with anisn-Vitamin C

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, L.

1979-03-01

A tightly packed water moderated /sup 233/UO/sub 2/--ThO/sub 2/ critical assembly was analyzed with the Vitamin C library and the 1-D S/s n/ code, ANISN (S/sub 8/,P/sub 3/). The purpose of the study was to provide validation of this calculational model as applied to water-cooled hybrid fusion blankets. The quantities compared were the core eigenvalue and various activation shapes. The calculated eigenvalue was 1.02 +- 0.01. The /sup 233/U fission and /sup 232/Th capture shapes were found to be in good agreement (+-5%) with experiment, except near water--metal boundaries where differences up to 24% were observed. No such error peakingmore » was observed in the /sup 232/Th fast fission shape. We conclude that the model provides good volume averaged reaction rates in water-cooled systems. However, care must be exercised near water boundaries where thermally dependent reaction rates are significantly underestimated.« less

Potential of mean force of DNA guided assemblies past Debye-Hückel regime

NASA Astrophysics Data System (ADS)

Girard, Martin; Seo, Soyoung; Li, Yaohua; Mirkin, Chad; Olvera de La Cruz, Monica

Many of the bioinspired systems make use of biopolymers such as polypeptides or DNA. The latter is widely used in self-assembled systems, from colloidal crystals to origami construction. In these systems, salt is commonly required to screen the electrostatic repulsion between the strands. In the classical Debye-Hückel picture, salt ions are point particles and the screening distance is a decreasing monotonic function of salt concentration. This picture breaks down at moderate salt concentrations, where the behavior becomes non-monotonic. In this talk, we will show results for potential of mean force of DNA grafted colloids obtained through multiscale molecular dynamics. In this picture, the highly charged DNA causes non-trivial behavior at moderate salt concentrations (c 0 . 3 - 0 . 7 M), namely increase of repulsion for non-complementary DNA strands while repulsion decreases for complementary strands. We will show spatial cluster distribution as function of size and charge as well as implications for experimental systems.

Rheological transition in simple shear of moderately dense assemblies of dry cohesive granules

NASA Astrophysics Data System (ADS)

Murphy, Eric; Sundararajan, Sriram; Subramaniam, Shankar

2018-06-01

The rheology of homogeneous cohesive granular assemblies under shear at moderate volume fractions is investigated using the discrete element method for both frictionless and frictional granules. A transition in rheology from inertial to quasistatic scaling is observed at volume fractions below the jamming point of noncohesive systems, which is a function of the granular temperature, energy dissipation, and cohesive potential. The transition is found to be the result of growing clusters, which eventually percolate the domain, and change the mode of momentum transport in the system. Differences in the behavior of the shear stress normalized by the pressure are observed when frictionless and frictional cases are compared. These differences are explained through contact anisotropy after percolation occurs. Both frictionless and frictional systems are found to be vulnerable to instabilities after full system percolation has occurred, where the former becomes thermodynamically unstable and the latter may form shear bands. Finally, implications for constitutive modeling are discussed.

Low-coverage, whole-genome sequencing of Artocarpus camansi (Moraceae) for phylogenetic marker development and gene discovery1

PubMed Central

Gardner, Elliot M.; Johnson, Matthew G.; Ragone, Diane; Wickett, Norman J.; Zerega, Nyree J. C.

2016-01-01

Premise of the study: We used moderately low-coverage (17×) whole-genome sequencing of Artocarpus camansi (Moraceae) to develop genomic resources for Artocarpus and Moraceae. Methods and Results: A de novo assembly of Illumina short reads (251,378,536 pairs, 2 × 100 bp) accounted for 93% of the predicted genome size. Predicted coding regions were used in a three-way orthology search with published genomes of Morus notabilis and Cannabis sativa. Phylogenetic markers for Moraceae were developed from 333 inferred single-copy exons. Ninety-eight putative MADS-box genes were identified. Analysis of all predicted coding regions resulted in preliminary annotation of 49,089 genes. An analysis of synonymous substitutions for pairs of orthologs (Ks analysis) in M. notabilis and A. camansi strongly suggested a lineage-specific whole-genome duplication in Artocarpus. Conclusions: This study substantially increases the genomic resources available for Artocarpus and Moraceae and demonstrates the value of low-coverage de novo assemblies for nonmodel organisms with moderately large genomes. PMID:27437173

A Contingency Model of Conflict and Team Effectiveness

ERIC Educational Resources Information Center

Shaw, Jason D.; Zhu, Jing; Duffy, Michelle K.; Scott, Kristin L.; Shih, Hsi-An; Susanto, Ely

2011-01-01

The authors develop and test theoretical extensions of the relationships of task conflict, relationship conflict, and 2 dimensions of team effectiveness (performance and team-member satisfaction) among 2 samples of work teams in Taiwan and Indonesia. Findings show that relationship conflict moderates the task conflict-team performance…

Self assembly of rectangular shapes on concentration programming and probabilistic tile assembly models.

PubMed

Kundeti, Vamsi; Rajasekaran, Sanguthevar

2012-06-01

Efficient tile sets for self assembling rectilinear shapes is of critical importance in algorithmic self assembly. A lower bound on the tile complexity of any deterministic self assembly system for an n × n square is [Formula: see text] (inferred from the Kolmogrov complexity). Deterministic self assembly systems with an optimal tile complexity have been designed for squares and related shapes in the past. However designing [Formula: see text] unique tiles specific to a shape is still an intensive task in the laboratory. On the other hand copies of a tile can be made rapidly using PCR (polymerase chain reaction) experiments. This led to the study of self assembly on tile concentration programming models. We present two major results in this paper on the concentration programming model. First we show how to self assemble rectangles with a fixed aspect ratio ( α:β ), with high probability, using Θ( α + β ) tiles. This result is much stronger than the existing results by Kao et al. (Randomized self-assembly for approximate shapes, LNCS, vol 5125. Springer, Heidelberg, 2008) and Doty (Randomized self-assembly for exact shapes. In: proceedings of the 50th annual IEEE symposium on foundations of computer science (FOCS), IEEE, Atlanta. pp 85-94, 2009)-which can only self assembly squares and rely on tiles which perform binary arithmetic. On the other hand, our result is based on a technique called staircase sampling . This technique eliminates the need for sub-tiles which perform binary arithmetic, reduces the constant in the asymptotic bound, and eliminates the need for approximate frames (Kao et al. Randomized self-assembly for approximate shapes, LNCS, vol 5125. Springer, Heidelberg, 2008). Our second result applies staircase sampling on the equimolar concentration programming model (The tile complexity of linear assemblies. In: proceedings of the 36th international colloquium automata, languages and programming: Part I on ICALP '09, Springer-Verlag, pp 235-253, 2009), to self assemble rectangles (of fixed aspect ratio) with high probability. The tile complexity of our algorithm is Θ(log( n )) and is optimal on the probabilistic tile assembly model (PTAM)- n being an upper bound on the dimensions of a rectangle.

Depression and anxiety among elderly earthquake survivors in China.

PubMed

Liang, Ying

2017-12-01

This study investigated depression and anxiety among Chinese elderly earthquake survivors, addressing relevant correlations. We sampled one earthquake-prone city, utilising the Geriatric Depression Scale and Beck Anxiety Inventory. In addition, explorative factor analysis and structural equation model methods were used. Results indicated elderly earthquake survivors exhibited symptoms of moderate depression and anxiety; depression and anxiety are highly positively correlated. The overlap between these two psychological problems may be due to subjective fear and motoric dimensions; subjective fear and motoric dimensions of Beck Anxiety Inventory are more strongly related to Geriatric Depression Scale domains. The two scales exhibit high reliability and validity.

Figure and Dimension Metrology of Extremely Lightweight X-Ray Mirrors for Space Astronomy Applications

NASA Technical Reports Server (NTRS)

Zhang, William W.

2010-01-01

The International X-ray Observatory (IXO) is the next major space X-ray observatory, performing both imaging and spectroscopic studies of all kinds of objects in the Universe. It is a collaborative mission of the National Aeronautics and Space Administration of the United States, the European Space Agency, and Japan Aerospace Exploration Agency. It is to be launched into a Sun-Earth L2 orbit in 2021. One of the most challenging aspects of the mission is the construction of a flight mirror assembly capable focusing X-rays in the band of 0.1 to 40 keY with an angular resolution of better than 5 arc-seconds and with an effective collection area of more than 3 sq m. The mirror assembly will consist of approximately 15,000 parabolic and hyperbolic mirror segments, each of which is approximately 200mm by 300mm with a thickness of 0.4mm. The manufacture and qualification of these mirror segments and their integration into the giant mirror assembly have been the objectives of a vigorous technology development program at NASA's Goddard Space Flight Center. Each of these mirror segments needs to be measured and qualified for both optical figure and mechanical dimensions. In this talk, I will describe the technology program with a particular emphasis on a measurement system we are developing to meet those requirements, including the use of coordinate measuring machines, Fizeau interferometers, and custom-designed, and -built null lens. This system is capable of measuring highly off-axis aspherical or cylindrical mirrors with repeatability, accuracy, and speed.

Catalysis in the 3rd Dimension: How Organic Molecules May be Formed

NASA Technical Reports Server (NTRS)

Freund, Friedemann; DeVincenzi, D. (Technical Monitor)

2001-01-01

Catalysis is often little more than a word to phenomenologically describe the fact that a reaction follows a pat1 that leads to products of an unexpected kind or of unexpected yield. Low activation energy barriers for intermediates are recognized as the most likely cause why a system deviates from the thermodynamic pull towards minimizing its free energy and ends up in a metastable state. Seldom is the mechanism known. This i: particularly true for heterogeneous catalysis under hydrothermal conditions with minerals as catalysts. It is commonly assumed that catalytic action takes place across solid-fluid interfaces and that, on the atomic level, interfaces are just 2-dimensional contacts. This makes it difficult to understand, for instance, the assembly of long-chain carboxylic (fatty) acids. 3y studying single crystals that grew from a melt in the presence of H2O and CO2, we can show: (1) that numerals take up the fluid components into solid solution, (2) that some-thing happens converting them to -educedH and C, (3) that C atoms segregate into dislocations and tie C-C bonds. The products are medium-to-long chain Cn protomolecules, with some C-H attached, pre-assembled in the dislocations. Upon solvent extraction, these proto-molecules turn into carboxylic and dicarboxylic acids. This observation suggests that, in a very elementary step, catalysis under hydrothermal conditions leading to fatty acids involves the pre-assembly of Cn entities in the interface that is not 2-D but extends into the 3rd dimension, with dislocations as synthesis sites.

Fabrication of Miniature Thermoelectric Generators Using Bulk Materials

NASA Astrophysics Data System (ADS)

Joo, Sung-Jae; Ryu, Byungki; Min, Bok-Ki; Lee, Ji-Eun; Kim, Bong-Seo; Park, Su-Dong; Lee, Hee-Woong

2016-07-01

Miniature thermoelectric modules (TEMs) are required for micro power generation as well as local cooling, and they should have small size and high performance. However, conventional bulk TEMs generally have in-plane dimensions of a few centimeters, and empty space between the legs for electrical isolation makes efficient miniaturization difficult. In this study, a miniature TEM with footprint of about 0.35 cm2 and leg height of 0.97 mm was fabricated by reducing the dimensions of the legs and attaching them together to form a closely packed assembly, without using microelectromechanical processes. First, Bi0.4Sb1.6Te3 (BST) and Bi2Te2.7Se0.3 (BTS) ingots were made by ball milling and spark plasma sintering, and the ingots were cut into thin plates. These BST and BTS plates were then attached alternately using polyimide tapes, and the attached plates were sliced vertically to produce thin sheets. This process was repeated once again to make chessboard-like assemblies having 20 p- n pairs in an area of 0.35 cm2, and electrical contacts were formed by Ni sputtering and Ag paste coating. Finally, thermally conductive silicone pads (~500 μm) were attached on both sides of the assembly using electrically insulating interface thermal tapes (˜180 μm). The maximum output power ( P max) from the miniature module was about 28 μW and 2.0 mW for temperature difference (Δ T) of 5.6°C and 50.5°C, respectively. Reducing the contact resistance was considered to be the key to increase the output power.

Field-induced self-assembly of iron oxide nanoparticles investigated using small-angle neutron scattering.

PubMed

Fu, Zhendong; Xiao, Yinguo; Feoktystov, Artem; Pipich, Vitaliy; Appavou, Marie-Sousai; Su, Yixi; Feng, Erxi; Jin, Wentao; Brückel, Thomas

2016-11-03

The magnetic-field-induced assembly of magnetic nanoparticles (NPs) provides a unique and flexible strategy in the design and fabrication of functional nanostructures and devices. We have investigated the field-induced self-assembly of core-shell iron oxide NPs dispersed in toluene by means of small-angle neutron scattering (SANS). The form factor of the core-shell NPs was characterized and analyzed using SANS with polarized neutrons. Large-scale aggregates of iron oxide NPs formed above 0.02 T as indicated by very-small-angle neutron scattering measurements. A three-dimensional long-range ordered superlattice of iron oxide NPs was revealed under the application of a moderate magnetic field. The crystal structure of the superlattice has been identified to be face-centred cubic.

Is the Moderating Effect of Social Support on New Korean Mothers' Psychological Distress Contingent on Levels of Marital Quality?

PubMed

Park, Ki Tae

2018-03-01

This study examines how levels of marital quality change the effect of social support on postpartum psychological distress among new Korean mothers using the Panel Study on Korean Children (N = 1585). In accord with findings from previous studies, this study shows that low marital quality negatively affects new mothers' mental health, but that social support alleviates psychological distress independent of marital quality. The main finding of this research is that the moderating effect of social support is contingent on levels of marital quality. Aggregated social support moderates the effects of marital quality on new mothers' mental health only when the level of marital quality is low. Furthermore, each dimension of social support (emotional, informational, and instrumental) only has a moderating effect when marital quality is low. The findings highlight the fact that the moderating effect of social support varies with the individual context and so customized social support that fits individual needs matters for the mental health of new mothers.

Automated Slide Projector

ERIC Educational Resources Information Center

Gould, Mauri

1975-01-01

Describes assembly of a moderately priced synchronized projector and cassette tape recorder using a single channel recorder with a tuned amplifier to separate voice and control tones. Construction requires familiarity with transistors and use of an oscilloscope with an audio signal generator. A picture as well as schematics is provided. (GH)

A hierarchical causal taxonomy of psychopathology across the life span.

PubMed

Lahey, Benjamin B; Krueger, Robert F; Rathouz, Paul J; Waldman, Irwin D; Zald, David H

2017-02-01

We propose a taxonomy of psychopathology based on patterns of shared causal influences identified in a review of multivariate behavior genetic studies that distinguish genetic and environmental influences that are either common to multiple dimensions of psychopathology or unique to each dimension. At the phenotypic level, first-order dimensions are defined by correlations among symptoms; correlations among first-order dimensions similarly define higher-order domains (e.g., internalizing or externalizing psychopathology). We hypothesize that the robust phenotypic correlations among first-order dimensions reflect a hierarchy of increasingly specific etiologic influences . Some nonspecific etiologic factors increase risk for all first-order dimensions of psychopathology to varying degrees through a general factor of psychopathology. Other nonspecific etiologic factors increase risk only for all first-order dimensions within a more specific higher-order domain. Furthermore, each first-order dimension has its own unique causal influences. Genetic and environmental influences common to family members tend to be nonspecific, whereas environmental influences unique to each individual are more dimension-specific. We posit that these causal influences on psychopathology are moderated by sex and developmental processes. This causal taxonomy also provides a novel framework for understanding the heterogeneity of each first-order dimension: Different persons exhibiting similar symptoms may be influenced by different combinations of etiologic influences from each of the 3 levels of the etiologic hierarchy. Furthermore, we relate the proposed causal taxonomy to transdimensional psychobiological processes, which also impact the heterogeneity of each psychopathology dimension. This causal taxonomy implies the need for changes in strategies for studying the etiology, psychobiology, prevention, and treatment of psychopathology. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

A Design for an Orbital Assembly Facility for Complex Missions

NASA Astrophysics Data System (ADS)

Feast, S.; Bond, A.

A design is presented for an Operations Base Station (OBS) in low earth orbit that will function as an integral part of a space transportation system, enabling assembly and maintenance of a Cis-Lunar transportation infrastructure and integration of vehicles for other high energy space missions to be carried out. Construction of the OBS assumes the use of the SKYLON Single-Stage-to-Orbit (SSTO) spaceplane, which imposes design and assembly constraints due to its payload mass limits and payload bay dimensions. It is assumed that the space transport infrastructure and high mission energy vehicles would also make use of SKYLON to deploy standard transport equipment and stages bound by these same constraints. The OBS is therefore a highly modular arrangement, incorporating some of these other vehicle system elements in its layout design. Architecturally, the facilities of the OBS are centred around the Assembly Dock which is in the form of a large cylindrical spaceframe structure with two large doors on either end incorporating a skin of aluminised Mylar to enclose the dock. Longitudinal rails provide internal tether attachments to anchor vehicles and components while manipulators are used for the handling and assembling of vehicle structures. The exterior of the OBS houses the habitation modules for workforce and vehicle crews along with propellant farms and other operational facilities.

3D investigation on polystyrene colloidal crystals by floatage self-assembly with mixed solvent via synchrotron radiation x-ray phase-contrast computed tomography

NASA Astrophysics Data System (ADS)

Fu, Yanan; Xie, Honglan; Deng, Biao; Du, Guohao; Xiao, Tiqiao

2017-06-01

The floatage self-assembly method was introduced with mixed solvent as the medium of polystyrene sphere suspension to fabricate the colloidal crystal. The three dimensional (3D) void system of the colloidal crystal was noninvasively characterized by synchrotron radiation phase-contrast computed tomography, and the quantitative image analysis was implemented aiming to the polystyrene sphere colloidal crystal. Comparing with gravity sedimentation method, the three samples fabricated from floatage self-assembly with mixed solvents have the lowest porosity, and when ethylene glycol and water were mixed with ratio of 1:1, the lowest porosity of 27.49% could be achieved, that has been very close to the minimum porosity of ordered 3D monodisperse sphere array (26%). In single slices, the porosities and fractal dimension for the voids were calculated. The results showed that two factors would significantly influence the porosity of the whole colloidal crystal: the first deposited sphere layer's orderliness and the sedimentation speed of the spheres. The floatage self-assembly could induce a stable close-packing process, resulted from the powerful nucleation force-lateral capillary force coupled with the mixed solvent to regulate the floating upward speed for purpose of matching the assembly rate.

Racial Identity in the Context of Pubertal Development: Implications for Adjustment

ERIC Educational Resources Information Center

Carter, Rona; Seaton, Eleanor K.; Rivas-Drake, Deborah

2017-01-01

The developmental significance of youths' racial identities during adolescence is well established. It is less clear how puberty, a normative process, influences the relationship between racial identity and adjustment outcomes during adolescence. This study examined whether puberty moderates the relationship between racial identity dimensions and…

Temperament and Peer Acceptance: The Mediating Role of Social Behavior

ERIC Educational Resources Information Center

Sterry, Terry W.; Reiter-Purtill, Jennifer; Gartstein, Maria A.; Gerhardt, Cynthia A.; Vannatta, Kathryn; Noll, Robert B.

2010-01-01

This study examined whether children's social behavior mediated the associations between specific dimensions of temperament and peer acceptance, and whether these associations were moderated by gender. We also explored the role of child's age on the associations between temperament and social functioning. Primary caregiver reports of temperament…

Dimensions, Patterns, and Personality Correlates of Drug Abuse in an Offender Population.

ERIC Educational Resources Information Center

Holland, Terrill R.

1978-01-01

Drug abuse scores from prisoners resulted in two factors describing lifetime use of cannabis versus opiates. Analysis of Minnesota Multiphasic Personality Inventory (MMPI) profiles versus drug abuse patterns indicated moderate, unidimensional relationship between variables. MMPI profiles of opiate users were similar to those identified in research…

Temperament Alters Susceptibility to Negative Peer Influence in Early Adolescence

ERIC Educational Resources Information Center

Mrug, Sylvie; Madan, Anjana; Windle, Michael

2012-01-01

The role of deviant peers in adolescent antisocial behavior has been well documented, but less is known about individual differences in susceptibility to negative peer influence. This study examined whether specific temperament dimensions moderate the prospective relationship between peer deviance and delinquent behavior in early adolescence.…

Easily-wired toggle switch

NASA Technical Reports Server (NTRS)

Dean, W. T.; Stringer, E. J.

1979-01-01

Crimp-type connectors reduce assembly and disassembly time. With design, no switch preparation is necessary and socket contracts are crimped to wires inserted in module attached to back of toggle switch engaging pins inside module to make electrical connections. Wires are easily removed with standard detachment tool. Design can accommodate wires of any gage and as many terminals can be placed on switch as wire gage and switch dimensions will allow.

Modular synthesis of a dual metal-dual semiconductor nano-heterostructure

DOE PAGES

Amirav, Lilac; Oba, Fadekemi; Aloni, Shaul; ...

2015-04-29

Reported is the design and modular synthesis of a dual metal-dual semiconductor heterostructure with control over the dimensions and placement of its individual components. Analogous to molecular synthesis, colloidal synthesis is now evolving into a series of sequential synthetic procedures with separately optimized steps. Here we detail the challenges and parameters that must be considered when assembling such a multicomponent nanoparticle, and their solutions.

Rotor assembly including superconducting magnetic coil

DOEpatents

Snitchler, Gregory L.; Gamble, Bruce B.; Voccio, John P.

2003-01-01

Superconducting coils and methods of manufacture include a superconductor tape wound concentrically about and disposed along an axis of the coil to define an opening having a dimension which gradually decreases, in the direction along the axis, from a first end to a second end of the coil. Each turn of the superconductor tape has a broad surface maintained substantially parallel to the axis of the coil.

Supramolecular networks with electron transfer in two dimensions

DOEpatents

Stupp, Samuel I.; Stoddart, J. Fraser; Shveyd, Alexander K.; Tayi, Alok S.; Sue, Chi-Hau; Narayanan, Ashwin

2016-09-13

Organic charge-transfer (CT) co-crystals in a crossed stack system are disclosed. The co-crystals exhibit bidirectional charge transfer interactions where one donor molecule shares electrons with two different acceptors, one acceptor face-to-face and the other edge-to-face. The assembly and charge transfer interaction results in a pleochroic material whereby the optical absorption continuously changes depending on the polarization angle of incident light.

Maternal Expectations for Toddlers' Reactions to Novelty: Relations of Maternal Internalizing Symptoms and Parenting Dimensions to Expectations and Accuracy of Expectations.

PubMed

Kiel, Elizabeth J; Buss, Kristin A

2010-07-03

OBJECTIVE: Although maternal internalizing symptoms and parenting dimensions have been linked to reports and perceptions of children's behavior, it remains relatively unknown whether these characteristics relate to expectations or the accuracy of expectations for toddlers' responses to novel situations. DESIGN: A community sample of 117 mother-toddler dyads participated in a laboratory visit and questionnaire completion. At the laboratory, mothers were interviewed about their expectations for their toddlers' behaviors in a variety of novel tasks; toddlers then participated in these activities, and trained coders scored their behaviors. Mothers completed questionnaires assessing demographics, depressive and worry symptoms, and parenting dimensions. RESULTS: Mothers who reported more worry expected their toddlers to display more fearful behavior during the laboratory tasks, but worry did not moderate how accurately maternal expectations predicted toddlers' observed behavior. When also reporting a low level of authoritative-responsive parenting, maternal depressive symptoms moderated the association between maternal expectations and observed toddler behavior, such that, as depressive symptoms increased, maternal expectations related less strongly to toddler behavior. CONCLUSIONS: When mothers were asked about their expectations for their toddlers' behavior in the same novel situations from which experimenters observe this behavior, symptoms and parenting had minimal effect on the accuracy of mothers' expectations. When in the context of low authoritative-responsive parenting, however, depressive symptoms related to less accurate predictions of their toddlers' fearful behavior.

Relationships between right-wing authoritarianism, terrorism threat, and attitudes towards restrictions of civil rights: a comparison among four European countries.

PubMed

Kossowska, Małgorzata; Trejtowicz, Mariusz; de Lemus, Soledad; Bukowski, Marcin; Van Hiel, Alain; Goodwin, Robin

2011-05-01

The present study tested the role of right-wing authoritarianism (RWA), terrorist threat, and sociopolitical 'climate' as predictors of support for governmental anti-terrorism policies and actions. Two dimensions of analysis were defined: the presence versus absence of al-Qaeda attacks, and adherence to surveillance versus anti-surveillance mainstream politics. In order to study the influence of these two contextual dimensions on the expression of attitudes, we selected four European countries that fall into these two dimensions--Poland, Belgium, Spain, and the UK. Results from our study provide support for the contention that attitudes towards restrictions of civil rights are related to RWA independently of the cultural context. Moreover, in the UK sample, we found that the threat of terrorism increases acceptance of limitations of civil liberties, but only among people who hold authoritarian beliefs. However, in Spain, the other country that experienced terrorist attacks, this moderation effect was not found which is interpreted in terms of differences in the sociopolitical climate in both countries. As predicted, we did not find such moderation effect in countries in which threat is relatively low (Poland and Belgium). The results are discussed with reference to the conceptual framework based on the importance of fear experiences, security-focused policies, as well as the specific cultural context in the study of reaction to terrorist threat. ©2010 The British Psychological Society.

HEAVY WATER MODERATED NEUTRONIC REACTOR

DOEpatents

Szilard, L.

1958-04-29

A nuclear reactor of the type which utilizes uranium fuel elements and a liquid coolant is described. The fuel elements are in the form of elongated tubes and are disposed within outer tubes extending through a tank containing heavy water, which acts as a moderator. The ends of the fuel tubes are connected by inlet and discharge headers, and liquid bismuth is circulated between the headers and through the fuel tubes for cooling. Helium is circulated through the annular space between the outer tubes in the tank and the fuel tubes to cool the water moderator to prevent boiling. The fuel tubes are covered with a steel lining, and suitable control means, heat exchange means, and pumping means for the coolants are provided to complete the reactor assembly.

Synthesis and characterization of designed BMHP1-derived self-assembling peptides for tissue engineering applications

NASA Astrophysics Data System (ADS)

Silva, Diego; Natalello, Antonino; Sanii, Babak; Vasita, Rajesh; Saracino, Gloria; Zuckermann, Ronald N.; Doglia, Silvia Maria; Gelain, Fabrizio

2012-12-01

The importance of self-assembling peptides (SAPs) in regenerative medicine is becoming increasingly recognized. The propensity of SAPs to form nanostructured fibers is governed by multiple forces including hydrogen bonds, hydrophobic interactions and π-π aromatic interactions among side chains of the amino acids. Single residue modifications in SAP sequences can significantly affect these forces. BMHP1-derived SAPs is a class of biotinylated oligopeptides, which self-assemble in β-structured fibers to form a self-healing hydrogel. In the current study, selected modifications in previously described BMHP1-derived SAPs were designed in order to investigate the influence of modified residues on self-assembly kinetics and scaffold formation properties. The Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis demonstrated the secondary structure (β-sheet) formation in all modified SAP sequences, whereas atomic force microscopy (AFM) analysis further confirmed the presence of nanofibers. Furthermore, the fiber shape and dimension analysis by AFM showed flattened and twisted fiber morphology ranging from ~8 nm to ~70 nm. The mechanical properties of the pre-assembled and post assembled solution were investigated by rheometry. The shear-thinning behavior and rapid re-healing properties of the pre-assembled solutions make them a preferable choice for injectable scaffolds. The wide range of stiffnesses (G') -from ~1000 to ~27 000 Pa - exhibited by the post-assembled scaffolds demonstrated their potential for a variety of tissue engineering applications. The extra cellular matrix (ECM) mimicking (physically and chemically) properties of SAP scaffolds enhanced cell adhesion and proliferation. The capability of the scaffold to facilitate murine neural stem cell (mNSC) proliferation was evaluated in vitro: the increased mNSCs adhesion and proliferation demonstrated the potential of newly synthesized SAPs for regenerative medicine approaches.The importance of self-assembling peptides (SAPs) in regenerative medicine is becoming increasingly recognized. The propensity of SAPs to form nanostructured fibers is governed by multiple forces including hydrogen bonds, hydrophobic interactions and π-π aromatic interactions among side chains of the amino acids. Single residue modifications in SAP sequences can significantly affect these forces. BMHP1-derived SAPs is a class of biotinylated oligopeptides, which self-assemble in β-structured fibers to form a self-healing hydrogel. In the current study, selected modifications in previously described BMHP1-derived SAPs were designed in order to investigate the influence of modified residues on self-assembly kinetics and scaffold formation properties. The Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis demonstrated the secondary structure (β-sheet) formation in all modified SAP sequences, whereas atomic force microscopy (AFM) analysis further confirmed the presence of nanofibers. Furthermore, the fiber shape and dimension analysis by AFM showed flattened and twisted fiber morphology ranging from ~8 nm to ~70 nm. The mechanical properties of the pre-assembled and post assembled solution were investigated by rheometry. The shear-thinning behavior and rapid re-healing properties of the pre-assembled solutions make them a preferable choice for injectable scaffolds. The wide range of stiffnesses (G') -from ~1000 to ~27 000 Pa - exhibited by the post-assembled scaffolds demonstrated their potential for a variety of tissue engineering applications. The extra cellular matrix (ECM) mimicking (physically and chemically) properties of SAP scaffolds enhanced cell adhesion and proliferation. The capability of the scaffold to facilitate murine neural stem cell (mNSC) proliferation was evaluated in vitro: the increased mNSCs adhesion and proliferation demonstrated the potential of newly synthesized SAPs for regenerative medicine approaches. Electronic supplementary information (ESI) available. See DOI: 10.1039/c2nr32656f

Effects of Regular Classes in Outdoor Education Settings: A Systematic Review on Students’ Learning, Social and Health Dimensions

PubMed Central

Becker, Christoph; Lauterbach, Gabriele; Spengler, Sarah; Dettweiler, Ulrich; Mess, Filip

2017-01-01

Background: Participants in Outdoor Education Programmes (OEPs) presumably benefit from these programmes in terms of their social and personal development, academic achievement and physical activity (PA). The aim of this systematic review was to identify studies about regular compulsory school- and curriculum-based OEPs, to categorise and evaluate reported outcomes, to assess the methodological quality, and to discuss possible benefits for students. Methods: We searched online databases to identify English- and German-language peer-reviewed journal articles that reported any outcomes on a student level. Two independent reviewers screened studies identified for eligibility and assessed the methodological quality. Results: Thirteen studies were included for analysis. Most studies used a case-study design, the average number of participants was moderate (mean valued (M) = 62.17; standard deviation (SD) = 64.12), and the methodological quality was moderate on average for qualitative studies (M = 0.52; SD = 0.11), and low on average for quantitative studies (M = 0.18; SD = 0.42). Eight studies described outcomes in terms of social dimensions, seven studies in learning dimensions and four studies were subsumed under additional outcomes, i.e., PA and health. Eleven studies reported positive, one study positive as well as negative, and one study reported negative effects. PA and mental health as outcomes were underrepresented. Conclusion: Tendencies were detected that regular compulsory school- and curriculum-based OEPs can promote students in respect of social, academic, physical and psychological dimensions. Very little is known concerning students’ PA or mental health. We recommend conducting more quasi-experimental design and longitudinal studies with a greater number of participants, and a high methodological quality to further investigate these tendencies. PMID:28475167

A meta-analysis of the association between substance use and emerging adult development using the IDEA scale.

PubMed

Davis, Jordan P; Dumas, Tara M; Briley, Daniel A; Sussman, Steve

2018-04-01

Much debate exists surrounding Arnett's theory of emerging adulthood in terms of its breadth and application. Researchers have attempted to capture dimensions of emerging adulthood (eg, experimentation, negativity/instability, other-focus, self-focus, and feeling in-between) through self report assessment, using variations of the Inventory of the Dimensions of Emerging Adulthood or IDEA. Results from studies investigating this relationship have been mixed. We conducted a meta-analysis on the association between substance use and the IDEA. Data were extracted to calculate correlational associations with substance use as well as typical moderators found in the literature. Twelve studies were meta-analyzed. We found small associations (range: ρ = -.03 to .15; d = .06 to 30) between the IDEA scores and substance use. We found higher severity (dependence diagnosis) of participants yielded larger associations across all dimensions (ρ = .16), and proportion of college students to be a subscale-specific moderator (experimentation, negativity/instability, other-focus, self-focus, and feeling in-between). Alcohol use outcomes also provided larger subscale-specific associations (experimentation, negativity/instability, other-focus, self-focus). The dimensions of emerging adulthood may be less effective in predicting substance use among non-college samples and those studies focusing on drug use. Further research should prioritize exploring variation in the transition to emerging adulthood among non-college samples and the longitudinal associations between IDEA and substance use. Important contributions include the modest association between IDEA and substance use as well as specific participant characteristics that amplify or mitigate the association between IDEA and substance use. (Am J Addict 2018;27:166-176). © 2018 American Academy of Addiction Psychiatry.

The Differential Relationship of Dimensions of Perceived Social Support with Cognitive Function among Older Adults

PubMed Central

Pillemer, Sarah C.; Holtzer, Roee

2015-01-01

Objectives Research has extensively examined the relationship of social support and cognition. Theories on social support suggest that it is a multidimensional construct including perceptions, actual assistance, and level of integration into a social network. Little is known, however, about the differential associations between distinct dimensions of perceived social support and cognition. The current study examined whether four empirically validated dimensions of perceived social support were differentially related to cognitive function in aging, and whether this association was moderated by gender. Methods The sample included 355 community-residing older adults (mean age=77ys; %female=55) enrolled in a longitudinal cohort study. Social support was assessed using the Medical Outcomes Study-Social Support Survey (MOS-SSS). Cognition was assessed using the Repeatable Battery for the Assessment of Neuropsychological Status (RBANS). Results Principal component analysis yielded four factors capturing different dimensions of social support: emotional/informational support, positive social interaction, tangible support, and affectionate support. Linear regression analyses revealed that both perceived emotional/informational support (Beta= 1.41, p =0.03; 95 %CI= .156 to 2.669) and positive social interaction (Beta=1.71, p =0.01; 95 %CI= .428 to 2.988) were significantly associated with RBANS total index score. Further analyses revealed that gender moderated the relationship between emotional/informational support (Beta=1.266, p=0.04), demonstrating that higher levels of perceived emotional support were associated with higher index scores in females but not in males. Discussion The associations between perceived emotional/informational support and positive social interaction suggest that social engagement may be an important target for intervention procedures for individuals at risk of cognitive decline and dementia. PMID:25902848

Effects of Regular Classes in Outdoor Education Settings: A Systematic Review on Students' Learning, Social and Health Dimensions.

PubMed

Becker, Christoph; Lauterbach, Gabriele; Spengler, Sarah; Dettweiler, Ulrich; Mess, Filip

2017-05-05

Participants in Outdoor Education Programmes (OEPs) presumably benefit from these programmes in terms of their social and personal development, academic achievement and physical activity (PA). The aim of this systematic review was to identify studies about regular compulsory school- and curriculum-based OEPs, to categorise and evaluate reported outcomes, to assess the methodological quality, and to discuss possible benefits for students. We searched online databases to identify English- and German-language peer-reviewed journal articles that reported any outcomes on a student level. Two independent reviewers screened studies identified for eligibility and assessed the methodological quality. Thirteen studies were included for analysis. Most studies used a case-study design, the average number of participants was moderate (mean valued (M) = 62.17; standard deviation (SD) = 64.12), and the methodological quality was moderate on average for qualitative studies (M = 0.52; SD = 0.11), and low on average for quantitative studies (M = 0.18; SD = 0.42). Eight studies described outcomes in terms of social dimensions, seven studies in learning dimensions and four studies were subsumed under additional outcomes, i.e., PA and health. Eleven studies reported positive, one study positive as well as negative, and one study reported negative effects. PA and mental health as outcomes were underrepresented. Tendencies were detected that regular compulsory school- and curriculum-based OEPs can promote students in respect of social, academic, physical and psychological dimensions. Very little is known concerning students' PA or mental health. We recommend conducting more quasi-experimental design and longitudinal studies with a greater number of participants, and a high methodological quality to further investigate these tendencies.

Square lattice honeycomb reactor for space power and propulsion

NASA Astrophysics Data System (ADS)

Gouw, Reza; Anghaie, Samim

2000-01-01

The most recent nuclear design study at the Innovative Nuclear Space Power and Propulsion Institute (INSPI) is the Moderated Square-Lattice Honeycomb (M-SLHC) reactor design utilizing the solid solution of ternary carbide fuels. The reactor is fueled with solid solution of 93% enriched (U,Zr,Nb)C. The square-lattice honeycomb design provides high strength and is amenable to the processing complexities of these ultrahigh temperature fuels. The optimum core configuration requires a balance between high specific impulse and thrust level performance, and maintaining the temperature and strength limits of the fuel. The M-SLHC design is based on a cylindrical core that has critical radius and length of 37 cm and 50 cm, respectively. This design utilized zirconium hydrate to act as moderator. The fuel sub-assemblies are designed as cylindrical tubes with 12 cm in diameter and 10 cm in length. Five fuel subassemblies are stacked up axially to form one complete fuel assembly. These fuel assemblies are then arranged in the circular arrangement to form two fuel regions. The first fuel region consists of six fuel assemblies, and 18 fuel assemblies for the second fuel region. A 10-cm radial beryllium reflector in addition to 10-cm top axial beryllium reflector is used to reduce neutron leakage from the system. To perform nuclear design analysis of the M-SLHC design, a series of neutron transport and diffusion codes are used. To optimize the system design, five axial regions are specified. In each axial region, temperature and fuel density are varied. The axial and radial power distributions for the system are calculated, as well as the axial and radial flux distributions. Temperature coefficients of the system are also calculated. A water submersion accident scenario is also analyzed for these systems. Results of the nuclear design analysis indicate that a compact core can be designed based on ternary uranium carbide square-lattice honeycomb fuel, which provides a relatively high thrust to weight ratio. .

Manual Skill Training of Retarded Children.

ERIC Educational Resources Information Center

Pomerantz, David J.

1975-01-01

In an on-going pilot study, training procedures previously found successful with moderately and severely retarded adolescents and adults have been adapted to teaching trainable retarded children (6-, 8-, and 10-years-old) to assemble a 14-piece coaster brake. Modifications in the carefully detailed task analysis approach have included the need for…

Service, Sex Work, and the Profession

ERIC Educational Resources Information Center

Potts, Donna L.

2012-01-01

The author serves as the chair of the American Association of University Professors' (AAUP) Assembly of State Conferences, the umbrella organization for individual state AAUP conferences; a moderator for Pandora's Project, a website for survivors of sexual abuse and assault; a volunteer for Veronica's Voice, a support program for women and girls…

Situating violent ideations within the landscape of mental health: Associations between violent ideations and dimensions of mental health.

PubMed

Murray, Aja Louise; Eisner, Manuel; Obsuth, Ingrid; Ribeaud, Denis

2017-03-01

Violent ideations occur more frequently in individuals with mental health problems. They may be of interest in clinical contexts as possible indicators of dangerousness, as corollaries of mental health problems, as candidate treatment targets and as potentially playing a role in perpetuation or onset of symptoms. In spite of their relevance to mental health, some fundamental questions about their place within the broader landscape of mental health problems remain unanswered. To provide a basic characterisation of the relations between violent ideations and dimensions of mental health and provide a foundation for future research in this area we factor analysed a measure of violent ideations and an omnibus measure of mental health dimensions in a normative sample of 1306 youth (at age 17). Results supported a separate dimension of violent ideations with a small to moderate correlation with five other dimensions of mental health: internalising, prosociality, ADHD, indirect/proactive aggression, and physical/reactive aggression. Controlling for comorbidity among mental health dimensions, all but ADHD had unique relations with violent ideations. This suggests that violent ideations are potentially of broad relevance to mental health and related behaviours and there should be a greater research effort aimed at understanding their possible role in mental health. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

Fractal-like hierarchical organization of bone begins at the nanoscale

NASA Astrophysics Data System (ADS)

Reznikov, Natalie; Bilton, Matthew; Lari, Leonardo; Stevens, Molly M.; Kröger, Roland

2018-05-01

The components of bone assemble hierarchically to provide stiffness and toughness. However, the organization and relationship between bone’s principal components—mineral and collagen—has not been clearly elucidated. Using three-dimensional electron tomography imaging and high-resolution two-dimensional electron microscopy, we demonstrate that bone mineral is hierarchically assembled beginning at the nanoscale: Needle-shaped mineral units merge laterally to form platelets, and these are further organized into stacks of roughly parallel platelets. These stacks coalesce into aggregates that exceed the lateral dimensions of the collagen fibrils and span adjacent fibrils as continuous, cross-fibrillar mineralization. On the basis of these observations, we present a structural model of hierarchy and continuity for the mineral phase, which contributes to the structural integrity of bone.

Control of Nanomaterial Self-Assembly in Ultrasonically Levitated Droplets.

PubMed

Seddon, Annela M; Richardson, Sam J; Rastogi, Kunal; Plivelic, Tomás S; Squires, Adam M; Pfrang, Christian

2016-04-07

We demonstrate that acoustic trapping can be used to levitate and manipulate droplets of soft matter, in particular, lyotropic mesophases formed from self-assembly of different surfactants and lipids, which can be analyzed in a contact-less manner by X-ray scattering in a controlled gas-phase environment. On the macroscopic length scale, the dimensions and the orientation of the particle are shaped by the ultrasonic field, while on the microscopic length scale the nanostructure can be controlled by varying the humidity of the atmosphere around the droplet. We demonstrate levitation and in situ phase transitions of micellar, hexagonal, bicontinuous cubic, and lamellar phases. The technique opens up a wide range of new experimental approaches of fundamental importance for environmental, biological, and chemical research.

Assembly and microscopic characterization of DNA origami structures.

PubMed

Scheible, Max; Jungmann, Ralf; Simmel, Friedrich C

2012-01-01

DNA origami is a revolutionary method for the assembly of molecular nanostructures from DNA with precisely defined dimensions and with an unprecedented yield. This can be utilized to arrange nanoscale components such as proteins or nanoparticles into pre-defined patterns. For applications it will now be of interest to arrange such components into functional complexes and study their geometry-dependent interactions. While commonly DNA nanostructures are characterized by atomic force microscopy or electron microscopy, these techniques often lack the time-resolution to study dynamic processes. It is therefore of considerable interest to also apply fluorescence microscopic techniques to DNA nanostructures. Of particular importance here is the utilization of novel super-resolved microscopy methods that enable imaging beyond the classical diffraction limit.

Toward a chemiresistive ammonia (NH3) gas sensor based on viral-templated gold nanoparticles embedded in polypyrrole nanowires

NASA Astrophysics Data System (ADS)

Yan, Yiran; Zhang, Miluo; Su, Heng Chia; Myung, Nosang V.; Haberer, Elaine D.

2014-08-01

Preliminary studies toward the assembly of a gold-polypyrrole (PPy) peapod-like chemiresistive ammonia (NH3) gas sensors are presented. The proposed synthesis process will use electropolymerization to embed gold nanoparticles in polypyrrole nanowires. Viral-templating of gold nanoparticles and PPy electrodeposition via cyclic voltammetry are the focus of this investigation. A gold-binding M13 bacteriophage was used as a bio-template to assemble continuous chains of gold nanoparticles on interdigitated Pt working electrodes. The dimensions of the resulting nanowire-like structures were examined and the electrical resistance measured. PPy films were electropolymerized using an interdigitated planar, Pt electrode integrated counter and reference electrode. Morphological characterization of the polymer films was completed.

Entropy favours open colloidal lattices

NASA Astrophysics Data System (ADS)

Mao, Xiaoming; Chen, Qian; Granick, Steve

2013-03-01

Burgeoning experimental and simulation activity seeks to understand the existence of self-assembled colloidal structures that are not close-packed. Here we describe an analytical theory based on lattice dynamics and supported by experiments that reveals the fundamental role entropy can play in stabilizing open lattices. The entropy we consider is associated with the rotational and vibrational modes unique to colloids interacting through extended attractive patches. The theory makes predictions of the implied temperature, pressure and patch-size dependence of the phase diagram of open and close-packed structures. More generally, it provides guidance for the conditions at which targeted patchy colloidal assemblies in two and three dimensions are stable, thus overcoming the difficulty in exploring by experiment or simulation the full range of conceivable parameters.

The laboratory station for tyres grip testing on different surfaces

NASA Astrophysics Data System (ADS)

Kalinowski, K.; Grabowik, C.; Janik, W.; Ćwikła, G.; Skowera, M.

2015-11-01

The paper presents the conception of the device for tyre grip testing in the laboratory conditions. The main purpose is to provide a device working in confined spaces, which enables rapid changes of the tested samples of the road surfaces. Among the key assumptions the minimization of the device dimensions and the relative ease of transportation and mobility - the ability to quick assemble and disassemble were also assumed. The main components of the projected workstation includes: the replaceable platform for mounting samples of a road surface, the roller conveyor, the drive of the platform, the wheel mounting assembly and the axial force measuring system. At the design the station a morphological structure method has been used, particular elements have been optimized individually.

Reverse depletion effects and the determination of ligand density on some spherical bioparticles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Chunxiang; Liu, Yanhui, E-mail: ionazati@itp.ac.cn; Fan, Yangtao

In cell environments crowded with macromolecules, the depletion effects act and assist in the assembly of a wide range of cellular structures, from the cytoskeleton to the chromatin loop, which are well accepted. But a recent quantum dot experiment indicated that the dimensions of the receptor–ligand complex have strong effects on the size-dependent exclusion of proteins in cell environments. In this article, a continuum elastic model is constructed to resolve the competition between the dimension of the receptor–ligand complex and depletion effects in the endocytosis of a spherical virus-like bioparticle. Our results show that the depletion effects do not alwaysmore » assist endocytosis of a spherical virus-like bioparticle; while the dimension of the ligand–receptor complex is larger than the size of a small bioparticle in cell environments, the depletion effects do not work and reverse effects appear. The ligand density covered on the virus can be identified quantitatively.« less

Active molecular plasmonics: tuning surface plasmon resonances by exploiting molecular dimensions

NASA Astrophysics Data System (ADS)

Chen, Kai; Leong, Eunice Sok Ping; Rukavina, Michael; Nagao, Tadaaki; Liu, Yan Jun; Zheng, Yuebing

2015-06-01

Molecular plasmonics explores and exploits the molecule-plasmon interactions on metal nanostructures to harness light at the nanoscale for nanophotonic spectroscopy and devices. With the functional molecules and polymers that change their structural, electrical, and/or optical properties in response to external stimuli such as electric fields and light, one can dynamically tune the plasmonic properties for enhanced or new applications, leading to a new research area known as active molecular plasmonics (AMP). Recent progress in molecular design, tailored synthesis, and self-assembly has enabled a variety of scenarios of plasmonic tuning for a broad range of AMP applications. Dimension (i.e., zero-, two-, and threedimensional) of the molecules on metal nanostructures has proved to be an effective indicator for defining the specific scenarios. In this review article, we focus on structuring the field of AMP based on the dimension of molecules and discussing the state of the art of AMP. Our perspective on the upcoming challenges and opportunities in the emerging field of AMP is also included.

Exploratory Study of Dimensions of Health-related Quality of Life in the General Population of South Korea

PubMed Central

2017-01-01

Objectives This study aimed to explore dimensions in addition to the 5 dimensions of the 5-level EQ-5D version (EQ-5D-5L) that could satisfactorily explain variation in health-related quality of life (HRQoL) in the general population of South Korea. Methods Domains related to HRQoL were searched through a review of existing HRQoL instruments. Among the 28 potential dimensions, the 5 dimensions of the EQ-5D-5L and 7 additional dimensions (vision, hearing, communication, cognitive function, social relationships, vitality, and sleep) were included. A representative sample of 600 subjects was selected for the survey, which was administered through face-to-face interviews. Subjects were asked to report problems in 12 health dimensions at 5 levels, as well as their self-rated health status using the EuroQol visual analogue scale (EQ-VAS) and a 5-point Likert scale. Among subjects who reported no problems for any of the parameters in the EQ-5D-5L, we analyzed the frequencies of problems in the additional dimensions. A linear regression model with the EQ-VAS as the dependent variable was performed to identify additional significant dimensions. Results Among respondents who reported full health on the EQ-5D-5L (n=365), 32% reported a problem for at least 1 additional dimension, and 14% reported worse than moderate self-rated health. Regression analysis revealed a R2 of 0.228 for the original EQ-5D-5L dimensions, 0.200 for the new dimensions, and 0.263 for the 12 dimensions together. Among the added dimensions, vitality and sleep were significantly associated with EQ-VAS scores. Conclusions This study identified significant dimensions for assessing self-rated health among members of the general public, in addition to the 5 dimensions of the EQ-5D-5L. These dimensions could be considered for inclusion in a new preference-based instrument or for developing a country-specific HRQoL instrument. PMID:29207449

Aboveground and belowground arthropods experience different relative influences of stochastic versus deterministic community assembly processes following disturbance

PubMed Central

Martinez, Alexander S.; Faist, Akasha M.

2016-01-01

Background Understanding patterns of biodiversity is a longstanding challenge in ecology. Similar to other biotic groups, arthropod community structure can be shaped by deterministic and stochastic processes, with limited understanding of what moderates the relative influence of these processes. Disturbances have been noted to alter the relative influence of deterministic and stochastic processes on community assembly in various study systems, implicating ecological disturbances as a potential moderator of these forces. Methods Using a disturbance gradient along a 5-year chronosequence of insect-induced tree mortality in a subalpine forest of the southern Rocky Mountains, Colorado, USA, we examined changes in community structure and relative influences of deterministic and stochastic processes in the assembly of aboveground (surface and litter-active species) and belowground (species active in organic and mineral soil layers) arthropod communities. Arthropods were sampled for all years of the chronosequence via pitfall traps (aboveground community) and modified Winkler funnels (belowground community) and sorted to morphospecies. Community structure of both communities were assessed via comparisons of morphospecies abundance, diversity, and composition. Assembly processes were inferred from a mixture of linear models and matrix correlations testing for community associations with environmental properties, and from null-deviation models comparing observed vs. expected levels of species turnover (Beta diversity) among samples. Results Tree mortality altered community structure in both aboveground and belowground arthropod communities, but null models suggested that aboveground communities experienced greater relative influences of deterministic processes, while the relative influence of stochastic processes increased for belowground communities. Additionally, Mantel tests and linear regression models revealed significant associations between the aboveground arthropod communities and vegetation and soil properties, but no significant association among belowground arthropod communities and environmental factors. Discussion Our results suggest context-dependent influences of stochastic and deterministic community assembly processes across different fractions of a spatially co-occurring ground-dwelling arthropod community following disturbance. This variation in assembly may be linked to contrasting ecological strategies and dispersal rates within above- and below-ground communities. Our findings add to a growing body of evidence indicating concurrent influences of stochastic and deterministic processes in community assembly, and highlight the need to consider potential variation across different fractions of biotic communities when testing community ecology theory and considering conservation strategies. PMID:27761333

Templated assembly of BiFeO3 nanocrystals into 3D mesoporous networks for catalytic applications

NASA Astrophysics Data System (ADS)

Papadas, I. T.; Subrahmanyam, K. S.; Kanatzidis, M. G.; Armatas, G. S.

2015-03-01

The self-assembly of uniform nanocrystals into large porous architectures is currently of immense interest for nanochemistry and nanotechnology. These materials combine the respective advantages of discrete nanoparticles and mesoporous structures. In this article, we demonstrate a facile nanoparticle templating process to synthesize a three-dimensional mesoporous BiFeO3 material. This approach involves the polymer-assisted aggregating assembly of 3-aminopropanoic acid-stabilized bismuth ferrite (BiFeO3) nanocrystals followed by thermal decomposition of the surfactant. The resulting material consists of a network of tightly connected BiFeO3 nanoparticles (~6-7 nm in diameter) and has a moderately high surface area (62 m2 g-1) and uniform pores (ca. 6.3 nm). As a result of the unique mesostructure, the porous assemblies of BiFeO3 nanoparticles show an excellent catalytic activity and chemical stability for the reduction of p-nitrophenol to p-aminophenol with NaBH4.The self-assembly of uniform nanocrystals into large porous architectures is currently of immense interest for nanochemistry and nanotechnology. These materials combine the respective advantages of discrete nanoparticles and mesoporous structures. In this article, we demonstrate a facile nanoparticle templating process to synthesize a three-dimensional mesoporous BiFeO3 material. This approach involves the polymer-assisted aggregating assembly of 3-aminopropanoic acid-stabilized bismuth ferrite (BiFeO3) nanocrystals followed by thermal decomposition of the surfactant. The resulting material consists of a network of tightly connected BiFeO3 nanoparticles (~6-7 nm in diameter) and has a moderately high surface area (62 m2 g-1) and uniform pores (ca. 6.3 nm). As a result of the unique mesostructure, the porous assemblies of BiFeO3 nanoparticles show an excellent catalytic activity and chemical stability for the reduction of p-nitrophenol to p-aminophenol with NaBH4. Electronic supplementary information (ESI) available: IR spectra and TG profiles of as-made BiFeO3 NPs and MBFA samples, TEM images of 3-APA-capped BiFeO3 NPs, EDS spectrum of MBFAs, N2 adsorption-desorption isotherms of randomly aggregated BiFeO3 NPs and catalytic data for 4-NP reduction by MBFAs and other nanostructured catalysts. See DOI: 10.1039/c5nr00185d

The provision of clearances accuracy in piston - cylinder mating

NASA Astrophysics Data System (ADS)

Glukhov, V. I.; Shalay, V. V.

2017-08-01

The paper is aimed at increasing the quality of the pumping equipment in oil and gas industry. The main purpose of the study is to stabilize maximum values of productivity and durability of the pumping equipment based on the selective assembly of the cylinder-piston kinematic mating by optimization criterion. It is shown that the minimum clearance in the piston-cylinder mating is formed by maximum material dimensions. It is proved that maximum material dimensions are characterized by their own laws of distribution within the tolerance limits for the diameters of the cylinder internal mirror and the outer cylindrical surface of the piston. At that, their dispersion zones should be divided into size groups with a group tolerance equal to half the tolerance for the minimum clearance. The techniques for measuring the material dimensions - the smallest cylinder diameter and the largest piston diameter according to the envelope condition - are developed for sorting them into size groups. Reliable control of the dimensions precision ensures optimal minimum clearances of the piston-cylinder mating in all the size groups of the pumping equipment, necessary for increasing the equipment productivity and durability during the production, operation and repair processes.

Can Marijuana Make It Better? Prospective Effects of Marijuana and Temperament on Risk for Anxiety and Depression

PubMed Central

Grunberg, Victoria A.; Cordova, Kismet A.; Bidwell, L. Cinnamon; Ito, Tiffany A.

2015-01-01

Increases in marijuana use in recent years highlight the importance of understanding how marijuana affects mental health. Of particular relevance is the effect of marijuana use on anxiety and depression given that marijuana use is highest among late adolescents/early adults, the same age range in which risk for anxiety and depression is the highest. Here we examine how marijuana use moderates the effects of temperament on level of anxiety and depression in a prospective design in which baseline marijuana use and temperament predict anxiety and depression one year later. We found that harm avoidance (HA) is associated with higher anxiety and depression a year later, but only among those low in marijuana use. Those higher in marijuana use show no relation between HA and symptoms of anxiety and depression. Marijuana use also moderated the effect of novelty seeking (NS), with symptoms of anxiety and depression increasing with NS only among those with high marijuana use. NS was unrelated to symptoms of anxiety and depression among those low in marijuana use. The temperament dimension of reward dependence was unrelated to anxiety and depression symptoms. Our results suggest that marijuana use does not have an invariant relationship with anxiety and depression, and that the effects of relatively stable temperament dimensions can be moderated by other contextual factors. PMID:26415059

Integrating different tracking systems in football: multiple camera semi-automatic system, local position measurement and GPS technologies.

PubMed

Buchheit, Martin; Allen, Adam; Poon, Tsz Kit; Modonutti, Mattia; Gregson, Warren; Di Salvo, Valter

2014-12-01

Abstract During the past decade substantial development of computer-aided tracking technology has occurred. Therefore, we aimed to provide calibration equations to allow the interchangeability of different tracking technologies used in soccer. Eighty-two highly trained soccer players (U14-U17) were monitored during training and one match. Player activity was collected simultaneously with a semi-automatic multiple-camera (Prozone), local position measurement (LPM) technology (Inmotio) and two global positioning systems (GPSports and VX). Data were analysed with respect to three different field dimensions (small, <30 m 2 to full-pitch, match). Variables provided by the systems were compared, and calibration equations (linear regression models) between each system were calculated for each field dimension. Most metrics differed between the 4 systems with the magnitude of the differences dependant on both pitch size and the variable of interest. Trivial-to-small between-system differences in total distance were noted. However, high-intensity running distance (>14.4 km · h -1 ) was slightly-to-moderately greater when tracked with Prozone, and accelerations, small-to-very largely greater with LPM. For most of the equations, the typical error of the estimate was of a moderate magnitude. Interchangeability of the different tracking systems is possible with the provided equations, but care is required given their moderate typical error of the estimate.

The Impact of Job Stress and Job Satisfaction on Workforce Productivity in an Iranian Petrochemical Industry.

PubMed

Hoboubi, Naser; Choobineh, Alireza; Kamari Ghanavati, Fatemeh; Keshavarzi, Sareh; Akbar Hosseini, Ali

2017-03-01

Job stress and job satisfaction are important factors affecting workforce productivity. This study was carried out to investigate the job stress, job satisfaction, and workforce productivity levels, to examine the effects of job stress and job satisfaction on workforce productivity, and to identify factors associated with productivity decrement among employees of an Iranian petrochemical industry. In this study, 125 randomly selected employees of an Iranian petrochemical company participated. The data were collected using the demographic questionnaire, Osipow occupational stress questionnaire to investigate the level of job stress, Job Descriptive Index to examine job satisfaction, and Hersey and Goldsmith questionnaire to investigate productivity in the study population. The levels of employees' perceived job stress and job satisfaction were moderate-high and moderate, respectively. Also, their productivity was evaluated as moderate. Although the relationship between job stress and productivity indices was not statistically significant, the positive correlation between job satisfaction and productivity indices was statistically significant. The regression modeling demonstrated that productivity was significantly associated with shift schedule, the second and the third dimensions of job stress (role insufficiency and role ambiguity), and the second dimension of job satisfaction (supervision). Corrective measures are necessary to improve the shift work system. "Role insufficiency" and "role ambiguity" should be improved and supervisor support must be increased to reduce job stress and increase job satisfaction and productivity.

Cardiac troponin T and echocardiographic dimensions after repeated sprint vs. moderate intensity continuous exercise in healthy young males.

PubMed

Weippert, Matthias; Divchev, Dimitar; Schmidt, Paul; Gettel, Hannes; Neugebauer, Antina; Behrens, Kristin; Wolfarth, Bernd; Braumann, Klaus-Michael; Nienaber, Christoph A

2016-04-19

Regular physical exercise can positively influence cardiac function; however, investigations have shown an increase of myocardial damage biomarkers after acute prolonged endurance exercises. We investigated the effect of repeated sprint vs. moderate long duration exercise on markers of myocardial necrosis, as well as cardiac dimensions and functions. Thirteen healthy males performed two different running sessions (randomized, single blinded cross-over design): 60 minutes moderate intensity continuous training (MCT, at 70% of peak heart rate (HRpeak)) and two series of 12 × 30-second sprints with set recovery periods in-between (RST, at 90% HRpeak). Venous blood samples for cardiac troponin T (cTnT), creatine kinase (CK) and MB isoenzyme (CK-MB) were taken 1 and 4 hours after exercise sessions. After each session electrocardiographic (ECG) and transthoracic echocardiographic (TTE) data were recorded. Results showed that all variables - average heart rate, serum lactate concentration during RST, subjective exertion and cTnT after RST - were significantly higher compared to MCT. CK and CK-MB significantly increased regardless of exercise protocol, while ECG and TTE indicated normal cardiac function. Our results provide evidence that RST contributes significantly to cTnT and CK release. This biomarker increase seems to reflect a physiological rather than a pathological phenomenon in healthy, exercising subjects.

Cardiac troponin T and echocardiographic dimensions after repeated sprint vs. moderate intensity continuous exercise in healthy young males

PubMed Central

Weippert, Matthias; Divchev, Dimitar; Schmidt, Paul; Gettel, Hannes; Neugebauer, Antina; Behrens, Kristin; Wolfarth, Bernd; Braumann, Klaus-Michael; Nienaber, Christoph A.

2016-01-01

Regular physical exercise can positively influence cardiac function; however, investigations have shown an increase of myocardial damage biomarkers after acute prolonged endurance exercises. We investigated the effect of repeated sprint vs. moderate long duration exercise on markers of myocardial necrosis, as well as cardiac dimensions and functions. Thirteen healthy males performed two different running sessions (randomized, single blinded cross-over design): 60 minutes moderate intensity continuous training (MCT, at 70% of peak heart rate (HRpeak)) and two series of 12 × 30-second sprints with set recovery periods in-between (RST, at 90% HRpeak). Venous blood samples for cardiac troponin T (cTnT), creatine kinase (CK) and MB isoenzyme (CK-MB) were taken 1 and 4 hours after exercise sessions. After each session electrocardiographic (ECG) and transthoracic echocardiographic (TTE) data were recorded. Results showed that all variables - average heart rate, serum lactate concentration during RST, subjective exertion and cTnT after RST - were significantly higher compared to MCT. CK and CK-MB significantly increased regardless of exercise protocol, while ECG and TTE indicated normal cardiac function. Our results provide evidence that RST contributes significantly to cTnT and CK release. This biomarker increase seems to reflect a physiological rather than a pathological phenomenon in healthy, exercising subjects. PMID:27090032

Can marijuana make it better? Prospective effects of marijuana and temperament on risk for anxiety and depression.

PubMed

Grunberg, Victoria A; Cordova, Kismet A; Bidwell, L Cinnamon; Ito, Tiffany A

2015-09-01

Increases in marijuana use in recent years highlight the importance of understanding how marijuana affects mental health. Of particular relevance is the effect of marijuana use on anxiety and depression given that marijuana use is highest among late adolescents/early adults, the same age range in which risk for anxiety and depression is the highest. Here we examine how marijuana use moderates the effects of temperament on level of anxiety and depression in a prospective design in which baseline marijuana use and temperament predict anxiety and depression 1 year later. We found that harm avoidance (HA) is associated with higher anxiety and depression a year later, but only among those low in marijuana use. Those higher in marijuana use show no relation between HA and symptoms of anxiety and depression. Marijuana use also moderated the effect of novelty seeking (NS), with symptoms of anxiety and depression increasing with NS only among those with high marijuana use. NS was unrelated to symptoms of anxiety and depression among those low in marijuana use. The temperament dimension of reward dependence was unrelated to anxiety and depression symptoms. Our results suggest that marijuana use does not have an invariant relationship with anxiety and depression, and that the effects of relatively stable temperament dimensions can be moderated by other contextual factors. (c) 2015 APA, all rights reserved).

Dimensions of maternal parenting and infants’ autonomic functioning interactively predict early internalizing behavior problems

PubMed Central

Propper, Cathi; Gueron-Sela, Noa; Mills-Koonce, W. Roger

2015-01-01

Developmental pathways to childhood internalizing behavior problems are complex, with both environmental and child-level factors contributing to their emergence. The authors use data from a prospective longitudinal study (n = 206) to examine the associations between dimensions of caregiving experiences in the first year of life and anxious/depressed and withdrawn behaviors in early childhood. Additionally, the authors examine the extent to which these associations were moderated by infants’ autonomic functioning in the first year of life indexed using measures of respiratory sinus arrhythmia (RSA) and heart period (HP). Findings suggest that higher levels of maternal sensitivity in infancy are associated with fewer anxious/depressed and withdrawn behaviors at age 3 years. Negative intrusiveness was found to be positively associated with children’s anxious/depressed behaviors but not withdrawn behaviors. Further, moderation analyses suggested that the link between negative intrusive parenting during infancy and subsequent anxious/depressed behaviors is exacerbated for infants with average or low baseline HP and that positive engaging parenting during infancy was negatively related to withdrawn behaviors for infants demonstrating average to high levels baseline HP. Interestingly, RSA was not found to moderate the associations between parenting in infancy and later internalizing behavior problems suggesting that, during infancy, overall autonomic functioning may have greater implications for the development of internalizing behaviors than do parasympathetic influences alone. Implications of these findings and future directions for research are discussed. PMID:26063322

Structurally homogeneous nanosheets from self-assembly of a collagen-mimetic peptide.

PubMed

Jiang, Tao; Xu, Chunfu; Zuo, Xiaobing; Conticello, Vincent P

2014-08-04

A collagen-mimetic peptide, NSIII, has been designed with three sequential blocks having positive, neutral, and negative charges, respectively. The non-canonical imino acid, (2S,4S)-4-aminoproline (amp), was used to specify the positive charges at the Xaa positions of (Xaa-Yaa-Gly) triads in the N-terminal domain of NSIII. Peptide NSIII underwent self-assembly from aqueous solution to form a highly homogeneous population of nanosheets. Two-dimensional crystalline sheets formed in which the length of the peptide defined the height of the sheets. These results contrasted with prior results on a similar multi-domain collagen-mimetic polypeptides in which the sheets had highly polydisperse distribution of sizes in the (x/y)- and (z)-dimensions. The structural differences between the two nanosheet assemblies were interpreted in terms of the relative stereoelectronic effects of the different aminoproline derivatives on the local triple helical conformation of the peptides. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A filamentous molecular chaperone of the prefoldin family from the deep-sea hyperthermophile Methanocaldococcus jannaschii.

PubMed

Whitehead, Timothy A; Boonyaratanakornkit, Boonchai B; Höllrigl, Volker; Clark, Douglas S

2007-04-01

Prefoldin is a molecular chaperone found in the domains eukarya and archaea that acts in conjunction with Group II chaperonin to correctly fold other nascent proteins. Previously, our group identified a putative single subunit of prefoldin, gamma PFD, that was up-regulated in response to heat stress in the hyperthermophilic archaeon Methanocaldococcus jannaschii. In order to characterize this protein, we subcloned and expressed it and the other two prefoldin subunits from M. jannaschii, alpha and beta PFD, into Eschericia coli and characterized the proteins. Whereas alpha and beta PFD readily assembled into the expected hexamer, gamma PFD would not assemble with either protein. Instead, gamma PFD forms long filaments of defined dimensions measuring 8.5 nm x 1.7-3.5 nm and lengths exceeding 1 microm. Filamentous gamma PFD acts as a molecular chaperone through in vitro assays, in a manner comparable to PFD. A possible molecular model for filament assembly is discussed.

A filamentous molecular chaperone of the prefoldin family from the deep-sea hyperthermophile Methanocaldococcus jannaschii

PubMed Central

Whitehead, Timothy A.; Boonyaratanakornkit, Boonchai B.; Höllrigl, Volker; Clark, Douglas S.

2007-01-01

Prefoldin is a molecular chaperone found in the domains eukarya and archaea that acts in conjunction with Group II chaperonin to correctly fold other nascent proteins. Previously, our group identified a putative single subunit of prefoldin, γ PFD, that was up-regulated in response to heat stress in the hyperthermophilic archaeon Methanocaldococcus jannaschii. In order to characterize this protein, we subcloned and expressed it and the other two prefoldin subunits from M. jannaschii, α and β PFD, into Eschericia coli and characterized the proteins. Whereas α and β PFD readily assembled into the expected hexamer, γ PFD would not assemble with either protein. Instead, γ PFD forms long filaments of defined dimensions measuring 8.5 nm × 1.7–3.5 nm and lengths exceeding 1 μm. Filamentous γ PFD acts as a molecular chaperone through in vitro assays, in a manner comparable to PFD. A possible molecular model for filament assembly is discussed. PMID:17384227

Preparation and development of block copolypeptide vesicles and hydrogels for biological and medical applications.

PubMed

Deming, Timothy J

2014-01-01

There have been many recent advances in the controlled polymerization of α-amino acid-N-carboxyanhydride (NCA) monomers into well-defined block copolypeptides. Transition metal initiating systems allow block copolypeptide synthesis with excellent control over number and lengths of block segments, chain length distribution, and chain-end functionality. Using this and other methods, block copolypeptides of controlled dimensions have been prepared and their self-assembly into organized structures studied by many research groups. The ability of well-defined block copolypeptides to assemble into supramolecular copolypeptide vesicles and hydrogels has led to the development of these materials for use in biological and medical applications. These assemblies have been found to possess unique properties that are derived from the amino acid building blocks and ordered conformations of the polypeptide segments. Recent work on the incorporation of active and stimulus-responsive functionality in these materials has tremendously increased their potential for use in biological and medical studies. © 2014 Wiley Periodicals, Inc.

Molecular Structure of a Helical ribbon in a Peptide Self-Assembly

NASA Astrophysics Data System (ADS)

Hwang, Wonmuk; Marini, Davide; Kamm, Roger D.; Zhang, Shuguang

2002-03-01

We have studied the molecular structure of nanometer scale helical ribbons observed during self-assembly of the peptide KFE8 (amino acid sequence: FKFEFKFE) (NanoLetters (2002, in press)). By analyzing the hydrogen bonding patterns between neighboring peptide backbones, we constructed a number of possible β-sheets. Using all possible combinations of these, we built helical ribbons with dimensions close to those found experimentally and performed molecular dynamics simulations to identify the most stable structure. Solvation effects were implemented by the analytic continuum electrostatics (ACE) model developed by Schaefer and Karplus (J. Phys. Chem. 100, 1578 (1996)). By applying electrostatic double layer theory, we incorporated the effect of pH by scaling the amount of charge on the sidechains. Our results suggest that the helical ribbon is comprised of a double β-sheet where the inner and the outer helices have distinct hydrogen bonding patterns. Our approach has general applicability to the study of helices formed by the self-assembly of β-sheet forming peptides with various amino acid sequences.

Host-guest encapsulation of materials by assembled virus protein cages

NASA Astrophysics Data System (ADS)

Douglas, Trevor; Young, Mark

1998-05-01

Self-assembled cage structures of nanometre dimensions can be used as constrained environments for the preparation of nanostructured materials, and the encapsulation of guest molecules, with potential applications in drug delivery and catalysis. In synthetic systems the number of subunits contributing to cage structures is typically rather small,. But the protein coats of viruses (virions) commonly comprise hundreds of subunits that self-assemble into a cage for transporting viral nucleic acids. Many virions, moreover, can undergo reversible structural changes that open or close gated pores to allow switchable access to their interior. Here we show that such a virion - that of the cowpea chlorotic mottle virus - can be used as a host for the synthesis of materials. We report the mineralization of two polyoxometalate species (paratungstate and decavanadate) and the encapsulation of an anionic polymer inside this virion, controlled by pH-dependent gating of the virion's pores. The diversity in size and shape of such virus particles make this a versatile strategy for materials synthesis and molecular entrapment.

Self-assembled three-dimensional and compressible interdigitated thin-film supercapacitors and batteries

PubMed Central

Nyström, Gustav; Marais, Andrew; Karabulut, Erdem; Wågberg, Lars; Cui, Yi; Hamedi, Mahiar M.

2015-01-01

Traditional thin-film energy-storage devices consist of stacked layers of active films on two-dimensional substrates and do not exploit the third dimension. Fully three-dimensional thin-film devices would allow energy storage in bulk materials with arbitrary form factors and with mechanical properties unique to bulk materials such as compressibility. Here we show three-dimensional energy-storage devices based on layer-by-layer self-assembly of interdigitated thin films on the surface of an open-cell aerogel substrate. We demonstrate a reversibly compressible three-dimensional supercapacitor with carbon nanotube electrodes and a three-dimensional hybrid battery with a copper hexacyanoferrate ion intercalating cathode and a carbon nanotube anode. The three-dimensional supercapacitor shows stable operation over 400 cycles with a capacitance of 25 F g−1 and is fully functional even at compressions up to 75%. Our results demonstrate that layer-by-layer self-assembly inside aerogels is a rapid, precise and scalable route for building high-surface-area 3D thin-film devices. PMID:26021485

Bacteriophage Tail-Tube Assembly Studied by Proton-Detected 4D Solid-State NMR

DOE PAGES

Zinke, Maximilian; Fricke, Pascal; Samson, Camille; ...

2017-07-07

Obtaining unambiguous resonance assignments remains a major bottleneck in solid-state NMR studies of protein structure and dynamics. Particularly for supramolecular assemblies with large subunits (>150 residues), the analysis of crowded spectral data presents a challenge, even if three-dimensional (3D) spectra are used. Here, we present a proton-detected 4D solid-state NMR assignment procedure that is tailored for large assemblies. The key to recording 4D spectra with three indirect carbon or nitrogen dimensions with their inherently large chemical shift dispersion lies in the use of sparse non-uniform sampling (as low as 2 %). As a proof of principle, we acquired 4D (H)COCANH,more » (H)CACONH, and (H)CBCANH spectra of the 20 kDa bacteriophage tail-tube protein gp17.1 in a total time of two and a half weeks. These spectra were sufficient to obtain complete resonance assignments in a straightforward manner without use of previous solution NMR data.« less

Bacteriophage Tail-Tube Assembly Studied by Proton-Detected 4D Solid-State NMR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zinke, Maximilian; Fricke, Pascal; Samson, Camille

Obtaining unambiguous resonance assignments remains a major bottleneck in solid-state NMR studies of protein structure and dynamics. Particularly for supramolecular assemblies with large subunits (>150 residues), the analysis of crowded spectral data presents a challenge, even if three-dimensional (3D) spectra are used. Here, we present a proton-detected 4D solid-state NMR assignment procedure that is tailored for large assemblies. The key to recording 4D spectra with three indirect carbon or nitrogen dimensions with their inherently large chemical shift dispersion lies in the use of sparse non-uniform sampling (as low as 2 %). As a proof of principle, we acquired 4D (H)COCANH,more » (H)CACONH, and (H)CBCANH spectra of the 20 kDa bacteriophage tail-tube protein gp17.1 in a total time of two and a half weeks. These spectra were sufficient to obtain complete resonance assignments in a straightforward manner without use of previous solution NMR data.« less

Directed assembly of bio-inspired hierarchical materials with controlled nanofibrillar architectures

NASA Astrophysics Data System (ADS)

Tseng, Peter; Napier, Bradley; Zhao, Siwei; Mitropoulos, Alexander N.; Applegate, Matthew B.; Marelli, Benedetto; Kaplan, David L.; Omenetto, Fiorenzo G.

2017-05-01

In natural systems, directed self-assembly of structural proteins produces complex, hierarchical materials that exhibit a unique combination of mechanical, chemical and transport properties. This controlled process covers dimensions ranging from the nano- to the macroscale. Such materials are desirable to synthesize integrated and adaptive materials and systems. We describe a bio-inspired process to generate hierarchically defined structures with multiscale morphology by using regenerated silk fibroin. The combination of protein self-assembly and microscale mechanical constraints is used to form oriented, porous nanofibrillar networks within predesigned macroscopic structures. This approach allows us to predefine the mechanical and physical properties of these materials, achieved by the definition of gradients in nano- to macroscale order. We fabricate centimetre-scale material geometries including anchors, cables, lattices and webs, as well as functional materials with structure-dependent strength and anisotropic thermal transport. Finally, multiple three-dimensional geometries and doped nanofibrillar constructs are presented to illustrate the facile integration of synthetic and natural additives to form functional, interactive, hierarchical networks.

Neutron transport analysis for nuclear reactor design

DOEpatents

Vujic, Jasmina L.

1993-01-01

Replacing regular mesh-dependent ray tracing modules in a collision/transfer probability (CTP) code with a ray tracing module based upon combinatorial geometry of a modified geometrical module (GMC) provides a general geometry transfer theory code in two dimensions (2D) for analyzing nuclear reactor design and control. The primary modification of the GMC module involves generation of a fixed inner frame and a rotating outer frame, where the inner frame contains all reactor regions of interest, e.g., part of a reactor assembly, an assembly, or several assemblies, and the outer frame, with a set of parallel equidistant rays (lines) attached to it, rotates around the inner frame. The modified GMC module allows for determining for each parallel ray (line), the intersections with zone boundaries, the path length between the intersections, the total number of zones on a track, the zone and medium numbers, and the intersections with the outer surface, which parameters may be used in the CTP code to calculate collision/transfer probability and cross-section values.

Neutron transport analysis for nuclear reactor design

DOEpatents

Vujic, J.L.

1993-11-30

Replacing regular mesh-dependent ray tracing modules in a collision/transfer probability (CTP) code with a ray tracing module based upon combinatorial geometry of a modified geometrical module (GMC) provides a general geometry transfer theory code in two dimensions (2D) for analyzing nuclear reactor design and control. The primary modification of the GMC module involves generation of a fixed inner frame and a rotating outer frame, where the inner frame contains all reactor regions of interest, e.g., part of a reactor assembly, an assembly, or several assemblies, and the outer frame, with a set of parallel equidistant rays (lines) attached to it, rotates around the inner frame. The modified GMC module allows for determining for each parallel ray (line), the intersections with zone boundaries, the path length between the intersections, the total number of zones on a track, the zone and medium numbers, and the intersections with the outer surface, which parameters may be used in the CTP code to calculate collision/transfer probability and cross-section values. 28 figures.

Thermal and athermal three-dimensional swarms of self-propelled particles

NASA Astrophysics Data System (ADS)

Nguyen, Nguyen H. P.; Jankowski, Eric; Glotzer, Sharon C.

2012-07-01

Swarms of self-propelled particles exhibit complex behavior that can arise from simple models, with large changes in swarm behavior resulting from small changes in model parameters. We investigate the steady-state swarms formed by self-propelled Morse particles in three dimensions using molecular dynamics simulations optimized for graphics processing units. We find a variety of swarms of different overall shape assemble spontaneously and that for certain Morse potential parameters at most two competing structures are observed. We report a rich “phase diagram” of athermal swarm structures observed across a broad range of interaction parameters. Unlike the structures formed in equilibrium self-assembly, we find that the probability of forming a self-propelled swarm can be biased by the choice of initial conditions. We investigate how thermal noise influences swarm formation and demonstrate ways it can be exploited to reconfigure one swarm into another. Our findings validate and extend previous observations of self-propelled Morse swarms and highlight open questions for predictive theories of nonequilibrium self-assembly.

Linking Psychological Need Satisfaction and Physical Activity to Dimensions of Health-Related Quality of Life During Adolescence: A Test of Direct, Reciprocal, and Mediating Effects.

PubMed

Gunnell, Katie E; Brunet, Jennifer; Sabiston, Catherine; Bélanger, Mathieu

2016-08-01

Despite research attention toward understanding relationships between psychological need satisfaction (PNS), moderate-to-vigorous-intensity physical activity (MVPA), and health-related quality of life (HRQoL), methodological limitations make it difficult to establish reciprocal and mediating effects. Reciprocal relationships between PNS and MVPA were examined over 4 years, and their effects on adolescents' change in dimensions of HRQoL were examined. Self-reported data were collected from 932 adolescents (M age = 10.9 years) every 4 months beginning in Grades 5/6. At the between-persons and within-person level, earlier PNS predicted later MVPA whereas earlier MVPA did not predict later PNS. Increases in MVPA were associated with greater change in physical (β linear = .61, β quadratic = .77, ps = .03) and school functioning (β linear = .68, β quadratic = .84, ps = .03) but no other dimensions of HRQoL (p > .05). Decreases in PNS were not associated with any of the dimensions of HRQoL. Fostering adolescents' PNS could be a starting point to increase MVPA, which, in turn, may enhance select dimensions of HRQoL.

Athletic Engagement and Athletic Identity in Top Croatian Sprint Runners.

PubMed

Babić, Vesna; Sarac, Jelena; Missoni, Sasa; Sindik, Josko

2015-09-01

The aim of the research was to determine construct validity and reliability for two questionnaires (Athlete Engagement Questionnaire-AEQ and Athletic Identity Measurement Scale-AIMS), applied on elite Croatian athletes-sprinters, as well as the correlations among the dimensions in these measuring instruments. Then, we have determined the differences in the dimensions of sport engagement and sport identity, according to gender, education level and winning medals on international competitions. A total of 71 elite athletes-sprinters (former and still active) are examined, from which 27 (38%) females and 44 (62%) males. The results of factor analyses revealed the existence of dimensions very similar as in the original instruments, which showed moderate to-high reliabilities. A small number of statistically significant correlations have been found between the dimensions of sport engagement and sport identity, mainly in male sprinter runners. Small number of statistically significant differences in the dimensions of sport engagement and sport identity have been found according to the gender, education level and winning medals on the international competitions. The most reasonable explanation of these differences could be given in terms of very similar characteristics of elite athletes on the same level of sport excellence.

Tolerance to structural disorder and tunable mechanical behavior in self-assembled superlattices of polymer-grafted nanocrystals

DOE PAGES

Gu, X. Wendy; Ye, Xingchen; Koshy, David M.; ...

2017-02-27

Large, freestanding membranes with remarkably high elastic modulus ( > 10 GPa) have been fabricated through the self-Assembly of ligand-stabilized inorganic nanocrystals, even though these nanocrystals are connected only by soft organic ligands (e.g., dodecanethiol or DNA) that are not cross-linked or entangled. Recent developments in the synthesis of polymer-grafted nanocrystals have greatly expanded the library of accessible superlattice architectures,which allows superlattice mechanical behavior to be linked to specific structural features. Here, colloidal self-Assembly is used to organize polystyrene-grafted Au nanocrystals at a fluid interface to form ordered solids with sub-10-nm periodic features. We used thin-film buckling and nanoindentation tomore » evaluate the mechanical behavior of polymer-grafted nanocrystal superlattices while exploring the role of polymer structural conformation, nanocrystal packing, and superlattice dimensions. Superlattices containing 3-20 vol % Au are found to have an elastic modulus of ~6-19 GPa, and hardness of ~120-170 MPa. We also found that rapidly self-Assembled superlattices have the highest elastic modulus, despite containing significant structural defects. Polymer extension, interdigitation, and grafting density are determined to be critical parameters that govern superlattice elastic and plastic deformation.« less

Membrane-Assisted Growth of DNA Origami Nanostructure Arrays

PubMed Central

2015-01-01

Biological membranes fulfill many important tasks within living organisms. In addition to separating cellular volumes, membranes confine the space available to membrane-associated proteins to two dimensions (2D), which greatly increases their probability to interact with each other and assemble into multiprotein complexes. We here employed two DNA origami structures functionalized with cholesterol moieties as membrane anchors—a three-layered rectangular block and a Y-shaped DNA structure—to mimic membrane-assisted assembly into hierarchical superstructures on supported lipid bilayers and small unilamellar vesicles. As designed, the DNA constructs adhered to the lipid bilayers mediated by the cholesterol anchors and diffused freely in 2D with diffusion coefficients depending on their size and number of cholesterol modifications. Different sets of multimerization oligonucleotides added to bilayer-bound origami block structures induced the growth of either linear polymers or two-dimensional lattices on the membrane. Y-shaped DNA origami structures associated into triskelion homotrimers and further assembled into weakly ordered arrays of hexagons and pentagons, which resembled the geometry of clathrin-coated pits. Our results demonstrate the potential to realize artificial self-assembling systems that mimic the hierarchical formation of polyhedral lattices on cytoplasmic membranes. PMID:25734977

Membrane-assisted growth of DNA origami nanostructure arrays.

PubMed

Kocabey, Samet; Kempter, Susanne; List, Jonathan; Xing, Yongzheng; Bae, Wooli; Schiffels, Daniel; Shih, William M; Simmel, Friedrich C; Liedl, Tim

2015-01-01

Biological membranes fulfill many important tasks within living organisms. In addition to separating cellular volumes, membranes confine the space available to membrane-associated proteins to two dimensions (2D), which greatly increases their probability to interact with each other and assemble into multiprotein complexes. We here employed two DNA origami structures functionalized with cholesterol moieties as membrane anchors--a three-layered rectangular block and a Y-shaped DNA structure--to mimic membrane-assisted assembly into hierarchical superstructures on supported lipid bilayers and small unilamellar vesicles. As designed, the DNA constructs adhered to the lipid bilayers mediated by the cholesterol anchors and diffused freely in 2D with diffusion coefficients depending on their size and number of cholesterol modifications. Different sets of multimerization oligonucleotides added to bilayer-bound origami block structures induced the growth of either linear polymers or two-dimensional lattices on the membrane. Y-shaped DNA origami structures associated into triskelion homotrimers and further assembled into weakly ordered arrays of hexagons and pentagons, which resembled the geometry of clathrin-coated pits. Our results demonstrate the potential to realize artificial self-assembling systems that mimic the hierarchical formation of polyhedral lattices on cytoplasmic membranes.

Tolerance to structural disorder and tunable mechanical behavior in self-assembled superlattices of polymer-grafted nanocrystals

NASA Astrophysics Data System (ADS)

Gu, X. Wendy; Ye, Xingchen; Koshy, David M.; Vachhani, Shraddha; Hosemann, Peter; Alivisatos, A. Paul

2017-03-01

Large, freestanding membranes with remarkably high elastic modulus (>10 GPa) have been fabricated through the self-assembly of ligand-stabilized inorganic nanocrystals, even though these nanocrystals are connected only by soft organic ligands (e.g., dodecanethiol or DNA) that are not cross-linked or entangled. Recent developments in the synthesis of polymer-grafted nanocrystals have greatly expanded the library of accessible superlattice architectures, which allows superlattice mechanical behavior to be linked to specific structural features. Here, colloidal self-assembly is used to organize polystyrene-grafted Au nanocrystals at a fluid interface to form ordered solids with sub-10-nm periodic features. Thin-film buckling and nanoindentation are used to evaluate the mechanical behavior of polymer-grafted nanocrystal superlattices while exploring the role of polymer structural conformation, nanocrystal packing, and superlattice dimensions. Superlattices containing 3-20 vol % Au are found to have an elastic modulus of ˜6-19 GPa, and hardness of ˜120-170 MPa. We find that rapidly self-assembled superlattices have the highest elastic modulus, despite containing significant structural defects. Polymer extension, interdigitation, and grafting density are determined to be critical parameters that govern superlattice elastic and plastic deformation.

Minimalistic peptide supramolecular co-assembly: expanding the conformational space for nanotechnology.

PubMed

Makam, Pandeeswar; Gazit, Ehud

2018-05-21

Molecular self-assembly is a ubiquitous process in nature and central to bottom-up nanotechnology. In particular, the organization of peptide building blocks into ordered supramolecular structures has gained much interest due to the unique properties of the products, including biocompatibility, chemical and structural diversity, robustness and ease of large-scale synthesis. In addition, peptides, as short as dipeptides, contain all the molecular information needed to spontaneously form well-ordered structures at both the nano- and the micro-scale. Therefore, peptide supramolecular assembly has been effectively utilized to produce novel materials with tailored properties for various applications in the fields of material science, engineering, medicine, and biology. To further expand the conformational space of peptide assemblies in terms of structural and functional complexity, multicomponent (two or more) peptide supramolecular co-assembly has recently evolved as a promising extended approach, similar to the structural diversity of natural sequence-defined biopolymers (proteins) as well as of synthetic covalent co-polymers. The use of this methodology was recently demonstrated in various applications, such as nanostructure physical dimension control, the creation of non-canonical complex topologies, mechanical strength modulation, the design of light harvesting soft materials, fabrication of electrically conducting devices, induced fluorescence, enzymatic catalysis and tissue engineering. In light of these significant advancements in the field of peptide supramolecular co-assembly in the last few years, in this tutorial review, we provide an updated overview and future prospects of this emerging subject.

Consistent Pl Analysis of Aqueous Uranium-235 Critical Assemblies

NASA Technical Reports Server (NTRS)

Fieno, Daniel

1961-01-01

The lethargy-dependent equations of the consistent Pl approximation to the Boltzmann transport equation for slowing down neutrons have been used as the basis of an IBM 704 computer program. Some of the effects included are (1) linearly anisotropic center of mass elastic scattering, (2) heavy element inelastic scattering based on the evaporation model of the nucleus, and (3) optional variation of the buckling with lethargy. The microscopic cross-section data developed for this program covered 473 lethargy points from lethargy u = 0 (10 Mev) to u = 19.8 (0.025 ev). The value of the fission neutron age in water calculated here is 26.5 square centimeters; this value is to be compared with the recent experimental value given as 27.86 square centimeters. The Fourier transform of the slowing-down kernel for water to indium resonance energy calculated here compared well with the Fourier transform of the kernel for water as measured by Hill, Roberts, and Fitch. This method of calculation has been applied to uranyl fluoride - water solution critical assemblies. Theoretical results established for both unreflected and fully reflected critical assemblies have been compared with available experimental data. The theoretical buckling curve derived as a function of the hydrogen to uranium-235 atom concentration for an energy-independent extrapolation distance was successful in predicting the critical heights of various unreflected cylindrical assemblies. The critical dimensions of fully water-reflected cylindrical assemblies were reasonably well predicted using the theoretical buckling curve and reflector savings for equivalent spherical assemblies.

Positive and Negative Interactions Observed Between Siblings: Moderating Effects for Children Exposed to Parents’ Conflict

PubMed Central

Iturralde, Esti; Margolin, Gayla; Spies Shapiro, Lauren A.

2012-01-01

This study investigated links between interparental conflict appraisals (specifically threat and self-blame), sibling relationship quality (positive and negative dimensions), and anxiety in sibling pairs comprised of an adolescent and a younger sibling close in age. Sibling relationship quality was measured through behavioral observation. Links between self-blame and anxiety were moderated by sibling relationship quality. In older siblings, positive behavior with a sibling was associated with an attenuated relation between self-blame and anxiety. A paradoxical moderating effect was found for negative interactions; for both younger and older siblings, a relation between self-blame and anxiety was weakened in the presence of sibling negativity. Results offered support for theorized benefits of sibling relationship quality in helping early adolescents adjust to conflict between parents. PMID:24244080

Bullying, Empathic Concern, and Internalization of Rules among Preschool Children: The Role of Emotion Understanding

ERIC Educational Resources Information Center

Camodeca, Marina; Coppola, Gabrielle

2016-01-01

The present study examined whether bullying, defending, and outsider behaviors in preschool children were associated with two conscience aspects (empathic concern and internalization of rules) and with emotion understanding. We also investigated whether emotion understanding moderated the relationship between these dimensions and bullying roles.…

Spiritual Dimensions of Bar/Bat Mitzvah Ceremonies for Jewish Children with Developmental Disabilities.

ERIC Educational Resources Information Center

Vogel, Gila; Reiter, Shunit

2003-01-01

Twenty-one children with moderate to severe developmental disabilities attending two special education schools in Israel participated in group bar/bat mitzvah ceremonies. Children were observed during the six-month learning process and the ceremonies. Parents and school staff were also interviewed. The study found the children could both express…

Technology Knowledge: High School Science Teachers' Conceptions of the Nature of Technology

ERIC Educational Resources Information Center

Waight, Noemi

2014-01-01

In-depth interviews guided by video elicitations examined 30 high school science teachers' conceptions of technology and by extension how these conceptions reflected dimensions of nature of technology. Altogether, 64% of the teachers characterized their schools and departments as aggressive-moderate adopters with generous access and support…

A Meta-Analytical Review of Teacher Credibility and Its Associations with Teacher Behaviors and Student Outcomes

ERIC Educational Resources Information Center

Finn, Amber N.; Schrodt, Paul; Witt, Paul L.; Elledge, Nikki; Jernberg, Kodiane A.; Larson, Lara M.

2009-01-01

This meta-analysis reviews the findings of 51 studies (N = 14,378) examining the associations among teacher credibility, teacher behaviors, and student outcomes. When all three dimensions of credibility are considered collectively (i.e., competence, trustworthiness, and caring), the cumulative evidence indicates a moderate, meaningful relationship…

HullBUG Technology Development for Underwater Hull Cleaning

DTIC Science & Technology

2015-05-14

drawings would be vended out to approved vendors for quoting. Quotes would be obtained for different levels of production in order to better understand...the savings associated with buying more. Once a good pricing model was developed and quantity purchased determined, parts would be vended out and...detailed, dimensioned and tolerances added to enable quoting by commercial machine shops. A top assembly drawing was created that identified all

Racial differences in parenting dimensions and adolescent condom use at sexual debut.

PubMed

Cox, Mary F

2006-01-01

Parenting style may be a determinant in reducing adolescent risk behavior. Previous studies have relied on a typological parenting approach, with classification into four groups: authoritative, authoritarian, permissive, and neglectful. In this study, two distinct parenting dimensions, demandingness and responsiveness, were examined as independent predictors of adolescent condom use. This study used a subsample of the National Longitudinal Study of Adolescent Health (Add Health) that included 153 adolescent-mother pairs. Maternal demandingness and responsiveness were measured using Wave I mother interviews. Logistic regression analyses were used to predict adolescent condom use at sexual debut at Wave II and to assess moderation by gender and race. (1) Maternal demandingness predicted increased likelihood of condom use in African American adolescents but decreased likelihood of condom use in White adolescents; (2) maternal responsiveness did not predict condom use; and (3) gender moderation was not present. To provide appropriate family counseling, public health nurses need to consider racial differences in contraceptive practices. Education regarding parental supervision practices should be considered as part of nursing interventions intended to increase condom use in African American adolescents.

Optimism and well-being: A prospective multi-method and multi-dimensional examination of optimism as a resilience factor following the occurrence of stressful life events

PubMed Central

Kleiman, Evan M.; Chiara, Alexandra M.; Liu, Richard T.; Jager-Hyman, Shari G.; Choi, Jimmy Y.; Alloy, Lauren B.

2016-01-01

Optimism has been conceptualized variously as positive expectations for the future (Scheier & Carver, 1985), optimistic attributions (Peterson & Seligman, 1984), illusion of control (Alloy & Abramson, 1979), and self-enhancing biases (Weinstein, 1980). Relatively little research has examined these multiple dimensions of optimism in relation to psychological and physical health. The current study assessed the multidimensional nature of optimism within a prospective vulnerability-stress framework. Initial principal component analyses revealed the following dimensions: Positive Expectations (PE), Inferential Style (IS), Sense of Invulnerability (SI), and Overconfidence (O). Prospective follow-up analyses demonstrated that PE was associated with fewer depressive episodes and moderated the effect of stressful life events on depressive symptoms. SI also moderated the effect of life stress on anxiety symptoms. Generally, our findings indicated that optimism is a multifaceted construct and not all forms of optimism have the same effects on well-being. Specifically, our findings indicted that PE may be the most relevant to depression, whereas SI may be the most relevant to anxiety. PMID:26558316

Microscale X-ray tomographic investigation of the interfacial morphology between the catalyst and micro porous layers in proton exchange membrane fuel cells

NASA Astrophysics Data System (ADS)

Prass, Sebastian; Hasanpour, Sadegh; Sow, Pradeep Kumar; Phillion, André B.; Mérida, Walter

2016-07-01

The interfacial morphology between the catalyst layer (CL) and micro porous layer (MPL) influences the performance of proton exchange membrane fuel cells (PEMFCs). Here we report a direct method to investigate the CL-MPL interfacial morphology of stacked and compressed gas diffusion layer (GDL with MPL)-catalyst coated membrane (CCM) assemblies. The area, origin and dimensions of interfacial gaps are studied with high-resolution X-ray micro computed tomography (X-μCT). The projected gap area (fraction of the CL-MPL interface separated by gaps) is higher for GDL-CCM assemblies with large differences in the surface roughness between CL and MPL but reduces with increasing compression and similarity in roughness. Relatively large continuous gaps are found in proximity to cracks in the MPL. These are hypothesized to form due to the presence of large pores on the surface of the GDL. Smaller gaps are induced by the surface roughness features throughout the CL-MPL interface. By modification of the pore sizes on the GDL surface serving as substrate for the MPL, the number and dimension of MPL crack induced gaps can be manipulated. Moreover, adjusting the CL and MPL surface roughness parameters to achieve similar orders of roughness can improve the surface mating characteristics of these two components.

Barriers perceived by teachers at work, coping strategies, self-efficacy and burnout.

PubMed

Doménech Betoret, Fernando; Gómez Artiga, Amparo

2010-11-01

This study examines the relationships among stressors, coping strategies, self-efficacy and burnout in a sample of 724 Spanish primary and secondary teachers. We understood stressors as barriers perceived by teachers that interfere with their work meeting learning objectives and which cause them stress and burnout. An analysis of teacher responses using hierarchical regression revealed that pedagogical barriers had significant positive effects on the burnout dimensions. Furthermore, the results show not only the moderator role played by coping strategies in the pedagogical barriers-burnout dimensions relationship, but also the association between self-efficacy and the coping strategies used by teachers. Practical implications are discussed.

Hypervelocity impacts into graphite

NASA Astrophysics Data System (ADS)

Latunde-Dada, S.; Cheesman, C.; Day, D.; Harrison, W.; Price, S.

2011-03-01

Studies have been conducted into the characterisation of the behaviour of commercial graphite (brittle) when subjected to hypervelocity impacts by a range of projectiles. The experiments were conducted with a two-stage gas gun capable of launching projectiles of differing density and strength to speeds of about 6kms-1 at right angles into target plates. The damage caused is quantified by measurements of the crater depth and diameters. From the experimental data collected, scaling laws were derived which correlate the crater dimensions to the velocity and the density of the projectile. It was found that for moderate projectile densities the crater dimensions obey the '2/3 power law' which applies to ductile materials.

Time management behavior as a moderator for the job demand-control interaction.

PubMed

Peeters, Miranda A G; Rutte, Christel G

2005-01-01

The interaction effects of time management, work demands, and autonomy on burnout were investigated in a survey study of 123 elementary teachers. A 3-way interaction between time management, work demands, and autonomy was hypothesized: The combination of high work demands and low autonomy was predicted to lead to burnout for teachers low in time management and not, or to a lesser extent, for those high in time management. This hypothesis is confirmed for emotional exhaustion, the most predictive dimension of teacher burnout, and partly confirmed for the personal accomplishment dimension. Generalizability to other contactual occupations is discussed. ((c) 2005 APA, all rights reserved).

Current research on parenting styles, dimensions, and beliefs.

PubMed

Smetana, Judith G

2017-06-01

For decades, parenting has been characterized in terms of broad global styles, with authoritative parenting seen as most beneficial for children's development. Concerns with greater sensitivity to cultural and contextual variations have led to greater specificity in defining parenting in terms of different parenting dimensions and greater consideration of the role of parenting beliefs in moderating links between parenting and adjustment. New research includes 'domain-specific' models that describe parents as flexibly deploying different practices depending on their goals, children's needs, and the types of behaviors towards which parenting is directed. These trends are described, and directions for future research are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

"Parsing the heterogeneity of psychopathy and aggression: Differential associations across dimensions and gender": Correction to Hecht et al. (2016).

PubMed

2017-01-01

Reports an error in "Parsing the heterogeneity of psychopathy and aggression: Differential associations across dimensions and gender" by Lisa K. Hecht, Joanna M. Berg, Scott O. Lilienfeld and Robert D. Latzman ( Personality Disorders: Theory, Research, and Treatment , 2016[Jan], Vol 7[1], 2-14). In the article, there was an error in Table 3 and in the fifth paragraph of the Results. The correct information has been provided. (The following abstract of the original article appeared in record 2015-29370-001.) Psychopathy is a multidimensional construct that is broadly associated with both reactive (RA) and proactive (PA) aggression. Nevertheless, a consistent pattern of associations between psychopathy and these 2 aggression subtypes has yet to emerge because of methodological differences across studies. Moreover, research has yet to examine gender differences in the relation between dimensions of psychopathy and RA/PA. Accordingly, we examined the associations between psychopathy dimensions, as operationalized by 2 self-report instruments, and subtypes of aggression within a diverse sample of undergraduates (N = 1,158). Results confirmed that psychopathy is broadly associated with PA, as well as RA, with dimensions of psychopathy evidencing common and distinct associations with both raw and residual RA and PA scores. In both models of psychopathy, PA was significantly and positively associated with all dimensions, whereas RA was significantly negatively associated with interpersonal and affective dimensions, and significantly positively associated with dimensions related to an antisocial and impulsive lifestyle. Gender significantly moderated associations among dimensions of psychopathy and RA/PA, such that the antisocial/behavioral dimension of psychopathy was positively associated with PA for males, whereas the antisocial/behavioral dimension was positively associated with RA for females. Results suggest both generality and specificity of psychopathy dimensions as related to subtypes of aggression, as well as possible differential pathways from psychopathy to different subtypes of aggression in men and women. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Reliability of high I/O high density CCGA interconnect electronic packages under extreme thermal environments

NASA Astrophysics Data System (ADS)

Ramesham, Rajeshuni

2012-03-01

Ceramic column grid array (CCGA) packages have been increasing in use based on their advantages such as high interconnect density, very good thermal and electrical performances, compatibility with standard surfacemount packaging assembly processes, and so on. CCGA packages are used in space applications such as in logic and microprocessor functions, telecommunications, payload electronics, and flight avionics. As these packages tend to have less solder joint strain relief than leaded packages or more strain relief over lead-less chip carrier packages, the reliability of CCGA packages is very important for short-term and long-term deep space missions. We have employed high density CCGA 1152 and 1272 daisy chained electronic packages in this preliminary reliability study. Each package is divided into several daisy-chained sections. The physical dimensions of CCGA1152 package is 35 mm x 35 mm with a 34 x 34 array of columns with a 1 mm pitch. The dimension of the CCGA1272 package is 37.5 mm x 37.5 mm with a 36 x 36 array with a 1 mm pitch. The columns are made up of 80% Pb/20%Sn material. CCGA interconnect electronic package printed wiring polyimide boards have been assembled and inspected using non-destructive x-ray imaging techniques. The assembled CCGA boards were subjected to extreme temperature thermal atmospheric cycling to assess their reliability for future deep space missions. The resistance of daisy-chained interconnect sections were monitored continuously during thermal cycling. This paper provides the experimental test results of advanced CCGA packages tested in extreme temperature thermal environments. Standard optical inspection and x-ray non-destructive inspection tools were used to assess the reliability of high density CCGA packages for deep space extreme temperature missions.

Self assembly of rectangular shapes on concentration programming and probabilistic tile assembly models

PubMed Central

Rajasekaran, Sanguthevar

2013-01-01

Efficient tile sets for self assembling rectilinear shapes is of critical importance in algorithmic self assembly. A lower bound on the tile complexity of any deterministic self assembly system for an n × n square is Ω(log(n)log(log(n))) (inferred from the Kolmogrov complexity). Deterministic self assembly systems with an optimal tile complexity have been designed for squares and related shapes in the past. However designing Θ(log(n)log(log(n))) unique tiles specific to a shape is still an intensive task in the laboratory. On the other hand copies of a tile can be made rapidly using PCR (polymerase chain reaction) experiments. This led to the study of self assembly on tile concentration programming models. We present two major results in this paper on the concentration programming model. First we show how to self assemble rectangles with a fixed aspect ratio (α:β), with high probability, using Θ(α + β) tiles. This result is much stronger than the existing results by Kao et al. (Randomized self-assembly for approximate shapes, LNCS, vol 5125. Springer, Heidelberg, 2008) and Doty (Randomized self-assembly for exact shapes. In: proceedings of the 50th annual IEEE symposium on foundations of computer science (FOCS), IEEE, Atlanta. pp 85–94, 2009)—which can only self assembly squares and rely on tiles which perform binary arithmetic. On the other hand, our result is based on a technique called staircase sampling. This technique eliminates the need for sub-tiles which perform binary arithmetic, reduces the constant in the asymptotic bound, and eliminates the need for approximate frames (Kao et al. Randomized self-assembly for approximate shapes, LNCS, vol 5125. Springer, Heidelberg, 2008). Our second result applies staircase sampling on the equimolar concentration programming model (The tile complexity of linear assemblies. In: proceedings of the 36th international colloquium automata, languages and programming: Part I on ICALP ’09, Springer-Verlag, pp 235–253, 2009), to self assemble rectangles (of fixed aspect ratio) with high probability. The tile complexity of our algorithm is Θ(log(n)) and is optimal on the probabilistic tile assembly model (PTAM)—n being an upper bound on the dimensions of a rectangle. PMID:24311993

Neutron detector

DOEpatents

Stephan, Andrew C [Knoxville, TN; Jardret,; Vincent, D [Powell, TN

2011-04-05

A neutron detector has a volume of neutron moderating material and a plurality of individual neutron sensing elements dispersed at selected locations throughout the moderator, and particularly arranged so that some of the detecting elements are closer to the surface of the moderator assembly and others are more deeply embedded. The arrangement captures some thermalized neutrons that might otherwise be scattered away from a single, centrally located detector element. Different geometrical arrangements may be used while preserving its fundamental characteristics. Different types of neutron sensing elements may be used, which may operate on any of a number of physical principles to perform the function of sensing a neutron, either by a capture or a scattering reaction, and converting that reaction to a detectable signal. High detection efficiency, an ability to acquire spectral information, and directional sensitivity may be obtained.

Thermionic fast spectrum reactor-converter on the basis of multi-cell TFE

NASA Astrophysics Data System (ADS)

Ponomarev-Stepnoi, N. N.; Kompaniets, G. V.; Poliakov, D. N.; Stepennov, B. S.; Andreev, P. V.; Zhabotinsky, E. E.; Nikolaev, Yu. V.; Lapochkin, N. V.

2001-02-01

Today Russian experts have technological experience in development of in-core thermionic converters for reactors of space nuclear power plants. Such a converter contains nuclear fuel inside and really represents a fuel element of a reactor. Two types of reactors can be considered on the basis of these thermionic fuel elements: with thermal or intermediate neutron spectrum, and with fast neutron spectrum. The first type is characterized by the presence of moderator in core that ensures most economical usage of nuclear fuel. The estimation shows that moderated system is the most effective in the power range of about 5 ... 100 kWe. The power systems of higher level are characterized by larger dimensions due to the presence of moderator. The second type of reactor is considered for higher power levels. This power range is about hundreds kWe. Dimensions of the fast reactor and core configuration are determined by the necessity to ensure the required net output power, on the one hand, and the necessity to ensure critical state on the other hand. In the case of using in-core thermionic fuel elements of the specified design, minimal reactor output power is determined by reactor criticality condition, and maximum reactor power output is determined by specifications and launcher capabilities. In the present paper the effective multiplication factor of a fast spectrum reactor on the basis of a multi-cell TFE developed by ``Lutch'' is considered a function of the total number of TFEs in the reactor. The MCU Monte-Carlo code, developed in Russia (Alekseev, et al., 1991), was used for computations. TFE computational models are placed in the nodes of a uniform triangular lattice and surrounded with pressure vessel and a side reflector. Ordinary fuel pins without thermionic converters were used instead of some TFEs to optimize criticality parameters, dimensions and output power of the reactor. General weight parameters of the reactor are presented in the paper. .

Nodal Diffusion Burnable Poison Treatment for Prismatic Reactor Cores

DOE Office of Scientific and Technical Information (OSTI.GOV)

A. M. Ougouag; R. M. Ferrer

2010-10-01

The prismatic block version of the High Temperature Reactor (HTR) considered as a candidate Very High Temperature Reactor (VHTR)design may use burnable poison pins in locations at some corners of the fuel blocks (i.e., assembly equivalent structures). The presence of any highly absorbing materials, such as these burnable poisons, within fuel blocks for hexagonal geometry, graphite-moderated High Temperature Reactors (HTRs) causes a local inter-block flux depression that most nodal diffusion-based method have failed to properly model or otherwise represent. The location of these burnable poisons near vertices results in an asymmetry in the morphology of the assemblies (or blocks). Hencemore » the resulting inadequacy of traditional homogenization methods, as these “spread” the actually local effect of the burnable poisons throughout the assembly. Furthermore, the actual effect of the burnable poison is primarily local with influence in its immediate vicinity, which happens to include a small region within the same assembly as well as similar regions in the adjacent assemblies. Traditional homogenization methods miss this artifact entirely. This paper presents a novel method for treating the local effect of the burnable poison explicitly in the context of a modern nodal method.« less

The Cac2 subunit is essential for productive histone binding and nucleosome assembly in CAF-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mattiroli, Francesca; Gu, Yajie; Balsbaugh, Jeremy L.

Nucleosome assembly following DNA replication controls epigenome maintenance and genome integrity. Chromatin assembly factor 1 (CAF-1) is the histone chaperone responsible for histone (H3-H4)2 deposition following DNA synthesis. Structural and functional details for this chaperone complex and its interaction with histones are slowly emerging. Using hydrogen-deuterium exchange coupled to mass spectrometry, combined with in vitro and in vivo mutagenesis studies, we identified the regions involved in the direct interaction between the yeast CAF-1 subunits, and mapped the CAF-1 domains responsible for H3-H4 binding. The large subunit, Cac1 organizes the assembly of CAF-1. Strikingly, H3-H4 binding is mediated by a compositemore » interface, shaped by Cac1-bound Cac2 and the Cac1 acidic region. Cac2 is indispensable for productive histone binding, while deletion of Cac3 has only moderate effects on H3-H4 binding and nucleosome assembly. These results define direct structural roles for yeast CAF-1 subunits and uncover a previously unknown critical function of the middle subunit in CAF-1.« less

Nuclear, Chloroplast, and Mitochondrial Genome Sequences of the Prospective Microalgal Biofuel Strain Picochlorum soloecismus

DOE PAGES

Gonzalez-Esquer, C. Raul; Twary, Scott N.; Hovde, Blake T.; ...

2018-01-25

Picochlorum soloecismus is a halotolerant, fast-growing, and moderate-lipid-producing microalga that is being evaluated as a renewable feedstock for biofuel production. Herein, we report on an improved high-quality draft assembly and annotation for the nuclear, chloroplast, and mitochondrial genomes of P. soloecismus DOE 101.

Near complete genome sequence of Clostridium paradoxum strain JW-YL-7

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lancaster, Andrew; Utturkar, Sagar M.; Poole, Farris

2016-05-05

Clostridium paradoxum strain JW-YL-7 is a moderately thermophilic anaerobic alkaliphile isolated from the municipal sewage treatment plant in Athens, GA. We report the near-complete genome sequence of C. paradoxum strain JW-YL-7 obtained by using PacBio DNA sequencing and Pilon for sequence assembly refinement with Illumina data.

"Mission possible: owls in education"

Treesearch

Marcia J. Wilson

1997-01-01

A panel of four experts in the fields of environmental education, rehabilitation and research assembled for a 1-3/4 hour workshop chaired by a moderator. Each panelist reflected upon their experiences using live owls in their own environmental education and/or research programs. Permanently disabled or imprinted owls can live long, useful lives as ambassadors from the...

Dupilumab therapy provides clinically meaningful improvement in patient-reported outcomes (PROs): A phase IIb, randomized, placebo-controlled, clinical trial in adult patients with moderate to severe atopic dermatitis (AD).

PubMed

Simpson, Eric L; Gadkari, Abhijit; Worm, Margitta; Soong, Weily; Blauvelt, Andrew; Eckert, Laurent; Wu, Richard; Ardeleanu, Marius; Graham, Neil M H; Pirozzi, Gianluca; Sutherland, E Rand; Mastey, Vera

2016-09-01

Moderate to severe atopic dermatitis (AD) is associated with substantial patient burden despite current therapies. We sought to evaluate dupilumab treatment on patient-reported outcomes in adults with moderate to severe AD. Adults (N = 380) with moderate to severe AD inadequately controlled by topical medications were randomized to 16 weeks of double-blind, subcutaneous treatment with dupilumab 100 mg every 4 weeks, 200 mg every 2 weeks, 300 mg every 2 weeks, 300 mg once weekly, or placebo. Patient-reported outcomes included pruritus numeric rating scale; patient-reported sleep item on Scoring AD scale; Patient-Oriented Eczema Measure; Hospital Anxiety and Depression Scale; Dermatology Life Quality Index; and 5-dimension 3-level EuroQol. Dupilumab reduced peak itch at 16 weeks relative to placebo by 1.1 to 3.2 points on numeric rating scale (P < .0001 all doses, except 100 mg every 4 weeks P < .05); improved sleep and health-related quality of life on Dermatology Life Quality Index and 5-dimension 3-level EuroQol (P < .05 all doses, except 100 mg every 4 weeks); and reduced anxiety and depression symptoms (P < .05 all doses). Dupilumab's effects appeared early and achieved clinically relevant improvements without significant safety concerns. There are potential cultural differences affecting patient-reported outcome responses. Outcomes were secondary or exploratory end points. Dupilumab produced early and sustained patient-reported and clinically relevant improvements in sleep, mental health, and health-related quality of life; the two 300-mg dose regimens resulted in greatest benefits. Copyright © 2016 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

Proposed Sources of Coaching Efficacy: A Meta-Analysis.

PubMed

Myers, Nicholas D; Park, Sung Eun; Ahn, Soyeon; Lee, Seungmin; Sullivan, Philip J; Feltz, Deborah L

2017-08-01

Coaching efficacy refers to the extent to which a coach believes that he or she has the capacity to affect the learning and performance of his or her athletes. The purpose of the current study was to empirically synthesize findings across the extant literature to estimate relationships between the proposed sources of coaching efficacy and each of the dimensions of coaching efficacy. A literature search yielded 20 studies and 278 effect size estimates that met the inclusion criteria. The overall relationship between the proposed sources of coaching efficacy and each dimension of coaching efficacy was positive and ranged from small to medium in size. Coach gender and level coached moderated the overall relationship between the proposed sources of coaching efficacy and each of the dimensions of coaching efficacy. Results from this meta-analysis provided some evidence for both the utility of, and possible revisions to, the conceptual model of coaching efficacy.

Selective modulation of cell response on engineered fractal silicon substrates

PubMed Central

Gentile, Francesco; Medda, Rebecca; Cheng, Ling; Battista, Edmondo; Scopelliti, Pasquale E.; Milani, Paolo; Cavalcanti-Adam, Elisabetta A.; Decuzzi, Paolo

2013-01-01

A plethora of work has been dedicated to the analysis of cell behavior on substrates with ordered topographical features. However, the natural cell microenvironment is characterized by biomechanical cues organized over multiple scales. Here, randomly rough, self-affinefractal surfaces are generated out of silicon,where roughness Ra and fractal dimension Df are independently controlled. The proliferation rates, the formation of adhesion structures, and the morphology of 3T3 murine fibroblasts are monitored over six different substrates. The proliferation rate is maximized on surfaces with moderate roughness (Ra ~ 40 nm) and large fractal dimension (Df ~ 2.4); whereas adhesion structures are wider and more stable on substrates with higher roughness (Ra ~ 50 nm) and lower fractal dimension (Df ~ 2.2). Higher proliferation occurson substrates exhibiting densely packed and sharp peaks, whereas more regular ridges favor adhesion. These results suggest that randomly roughtopographies can selectively modulate cell behavior. PMID:23492898

A study on off-fault aftershock pattern at N-Adria microplate

NASA Astrophysics Data System (ADS)

Bressan, Gianni; Barnaba, Carla; Magrin, Andrea; Rossi, Giuliana

2018-03-01

The spatial features of the aftershock sequences triggered by three moderate magnitude events with coda-duration magnitudes 4.1, 5.1 and 5.6, which occurred in Northeastern Italy and Western Slovenia, were investigated. The fractal dimension and the orientations of the planar features fitting the hypocentral data have been inferred. The spatial organization is articulated through two temporal phases. The first phase is characterized by the decreasing of the fractal dimension and by vertically oriented planes fitting the hypocentral foci. The second phase is marked by an increase of the fractal dimension and by the activation of different planes, with more widespread orientation. The aftershock temporal distribution is analysed with a model based on a static fatigue process. The process is favoured by the decrease of the overburden pressure, the sharp variations of the mechanical properties of the medium and the unclamping effect resulting from positive normal stress changes caused by the mainshock stress step.

Molecular pathways for defect annihilation in directed self-assembly

PubMed Central

Hur, Su-Mi; Thapar, Vikram; Ramírez-Hernández, Abelardo; Khaira, Gurdaman; Segal-Peretz, Tamar; Rincon-Delgadillo, Paulina A.; Li, Weihua; Müller, Marcus; Nealey, Paul F.; de Pablo, Juan J.

2015-01-01

Over the last few years, the directed self-assembly of block copolymers by surface patterns has transitioned from academic curiosity to viable contender for commercial fabrication of next-generation nanocircuits by lithography. Recently, it has become apparent that kinetics, and not only thermodynamics, plays a key role for the ability of a polymeric material to self-assemble into a perfect, defect-free ordered state. Perfection, in this context, implies not more than one defect, with characteristic dimensions on the order of 5 nm, over a sample area as large as 100 cm2. In this work, we identify the key pathways and the corresponding free energy barriers for eliminating defects, and we demonstrate that an extraordinarily large thermodynamic driving force is not necessarily sufficient for their removal. By adopting a concerted computational and experimental approach, we explain the molecular origins of these barriers and how they depend on material characteristics, and we propose strategies designed to overcome them. The validity of our conclusions for industrially relevant patterning processes is established by relying on instruments and assembly lines that are only available at state-of-the-art fabrication facilities, and, through this confluence of fundamental and applied research, we are able to discern the evolution of morphology at the smallest relevant length scales—a handful of nanometers—and present a view of defect annihilation in directed self-assembly at an unprecedented level of detail. PMID:26515095

Molecular pathways for defect annihilation in directed self-assembly.

DOE PAGES

Hur, Su-Mi; Thapar, Vikram; Ramirez-Hernandez, Abelardo; ...

2015-11-17

Over the last few years, the directed self-assembly of block copolymers by surface patterns has transitioned from academic curiosity to viable contender for commercial fabrication of next-generation nanocircuits by lithography. Recently, it has become apparent that kinetics, and not only thermodynamics, plays a key role for the ability of a polymeric material to self-assemble into a perfect, defect-free ordered state. Perfection, in this context, implies not more than one defect, with characteristic dimensions on the order of 5 nm, over a sample area as large as 100 cm2. In this work, we identify the key pathways and the corresponding free-energymore » barriers for eliminating defects, and we demonstrate that an extraordinarily large thermodynamic driving force is not necessarily sufficient for their removal. By adopting a concerted computational and experimental approach, we explain the molecular origins of these barriers, how they depend on material characteristics, and we propose strategies designed to over-come them. The validity of our conclusions for industrially-relevant patterning processes is established by relying on instruments and assembly lines that are only available at state-of-the-art fabrication facilities and, through this confluence of fundamental and applied research, we are able to discern the evolution of morphology at the smallest relevant length scales - a handful of nanometers -, and present a view of defect annihilation in directed self-assembly at an unprecedented level of detail.« less

Body image discrepancy and subjective norm as mediators and moderators of the relationship between body mass index and quality of life

PubMed Central

Pétré, Benoit; Scheen, André J; Ziegler, Olivier; Donneau, Anne-Françoise; Dardenne, Nadia; Husson, Eddy; Albert, Adelin; Guillaume, Michèle

2016-01-01

Background and objective Despite the strength and consistency of the relationship between body mass index (BMI) and quality of life (QoL), a reduction in BMI does not necessarily lead to an improvement in QoL. Between-subject variability indicates the presence of mediators and moderators in the BMI–QoL association. This study aimed to examine the roles of body image discrepancy (BID) and subjective norm (SN) as potential mediators and moderators. Subjects and methods In 2012, 3,016 volunteers (aged ≥18 years) participated in a community-based survey conducted in the French-speaking region of Belgium. Participation was enhanced using a large multimedia campaign (which was supported by a large network of recruiters) that employed the nonstigmatizing slogan, “Whatever your weight, your opinion will count”. Participants were invited to complete a web-based questionnaire on their weight-related experiences. Self-reported measures were used to calculate each participant’s BMI, BID, SN, and QoL (a French obesity-specific QoL questionnaire was used to calculate the participants’ physical dimension of QoL scores [PHY-QoL], psychosocial dimension of QoL scores [PSY/SOC-QoL], and their total scores). The covariates included gender, age, subjective economic status, level of education, household size, and perceived health. The mediation/moderation tests were based on Hayes’ method. Results Tests showed that the relationships between BMI and PHY-QoL, PSY/SOC-QoL, and TOT-QoL were partially mediated by BID in both males and females and by SN in females. Moreover, BID was a moderator of the relationship between BMI and PSY/SOC-QoL in males and females. SN was a moderator of the relationship between BMI and PSY/SOC-QoL in males and between BMI and total scores in males (when used without BID in the models). Conclusion BID and SN should be considered as important factors in obesity management strategies. The study shows that targeting BMI only is not sufficient to improve the QoL of overweight and obese subjects, and that other variables, including perceptual factors, should be considered. PMID:27853356

Measuring teamwork in primary care: Triangulation of qualitative and quantitative data.

PubMed

Brown, Judith Belle; Ryan, Bridget L; Thorpe, Cathy; Markle, Emma K R; Hutchison, Brian; Glazier, Richard H

2015-09-01

This article describes the triangulation of qualitative dimensions, reflecting high functioning teams, with the results of standardized teamwork measures. The study used a mixed methods design using qualitative and quantitative approaches to assess teamwork in 19 Family Health Teams in Ontario, Canada. This article describes dimensions from the qualitative phase using grounded theory to explore the issues and challenges to teamwork. Two quantitative measures were used in the study, the Team Climate Inventory (TCI) and the Providing Effective Resources and Knowledge (PERK) scale. For the triangulation analysis, the mean scores of these measures were compared with the qualitatively derived ratings for the dimensions. The final sample for the qualitative component was 107 participants. The qualitative analysis identified 9 dimensions related to high team functioning such as common philosophy, scope of practice, conflict resolution, change management, leadership, and team evolution. From these dimensions, teams were categorized numerically as high, moderate, or low functioning. Three hundred seventeen team members completed the survey measures. Mean site scores for the TCI and PERK were 3.87 and 3.88, respectively (of 5). The TCI was associated will all dimensions except for team location, space allocation, and executive director leadership. The PERK was associated with all dimensions except team location. Data triangulation provided qualitative and quantitative evidence of what constitutes teamwork. Leadership was pivotal in forging a common philosophy and encouraging team collaboration. Teams used conflict resolution strategies and adapted to the changes they encountered. These dimensions advanced the team's evolution toward a high functioning team. (c) 2015 APA, all rights reserved).

An Evaluation of Mandibular Dental and Basal Arch Dimensions in Class I and Class II Division 1 Adult Syrian Patients using Cone-beam Computed Tomography.

PubMed

Al-Hilal, Layal H; Sultan, Kinda; Hajeer, Mohammad Y; Mahmoud, Ghiath; Wanli, Abdulrahman A

2018-04-01

Aim: The aim of this study is (1) to inspect any difference in mandibular arch widths between males and females in class I and class II division 1 (class malocclusions using cone-beam computed tomography (CBCT), (2) to compare the mandibular dental and basal widths between the two groups, and (3) to investigate any possible correlation between dental and basal arch widths in both groups. Materials and methods: The CBCT images of 68 patients aged between 18 and 25 years consisted of 34 class I (17 males and 17 females) and 34 class (17 males and 17 females) who were recruited at the Department of Orthodontics, University of Damascus Dental School (Syria). Using on-demand three-dimensional (3D) on axial views, facial axis points for dental measurements and basal bone center (BBC) points for basal measurements were identified on lower canines and first molars. Dental and basal intercanine width (ICW) and intermolar width (IMW) were measured. Results: Independent t-test showed a statistically significant difference between males and females in several variables in both groups and a statistically significant difference between class I and class groups in the basal ICW for both genders and in the dental ICW for females only (p < 0.05). In class I group, Pearson's correlation coefficients between dental and basal measurements showed a strong correlation in the IMW for both genders (r > 0.73; p < 0.01) and a moderate correlation in females' ICW (r = 0.67; p < 0.01). In the class group, a moderate correlation in females' IMW (r = 0.67; p < 0.01) was found. Conclusion: Females compared with males had narrower dimensions. Class I patients had larger ICW than class II-1 patients in all measurements and had narrower IMW than class in most measurements for both genders. There were moderate-to-strong correlations between dental and basal dimensions. BBC points might be landmarks that accurately represent the basal bone arch. Clinical significance: CBCT-based assessments of dental and basal arch dimensions provide a great opportunity to accurately evaluate these aspects, to enhance clinicians' decisions regarding proper tooth movements, and to achieve good dentoalveolar intra-arch harmony. Keywords: Basal arch, Class I, Class Cone-beam computed tomography, Dental arch, Intercanine width, Intermolar width.

Group and individual stability of three parenting dimensions

PubMed Central

2011-01-01

Background The Parental Bonding Instrument, present self-report version, (PBI-PCh) includes three scales, Warmth, Protectiveness and Authoritarianism, which describe three dimensions of current parenting. The purposes of this study were to (1) evaluate the true and observed stability of these parenting dimensions related to older children, (2) explore the distribution of individual-level change across nine months and (3) test potential parental predictors of parenting instability. Methods Questionnaires were distributed to school-based samples of community parents of both genders (n = 150) twice, nine months apart. These questionnaires measured parenting, parental personality and emotional symptoms. Results Based on 1) stability correlations, 2) true stability estimates from structural equation modeling (SEM) and 3) distribution of individual-level change, Warmth appeared rather stable, although not as stable as personality traits. Protectiveness was moderately stable, whereas Authoritarianism was the least stable parenting dimension among community parents. The differences in stability between the three dimensions were consistent in both estimated true stability and observed stability. Most of the instability in Warmth originated from a minority of parents with personality, childhood care characteristics and lower current parenting warmth. For the Protectiveness dimension, instability was associated with higher Protectiveness scores. Conclusions True instability with all three self-reported parenting dimensions can occur across nine months in a community sample related to older children (7-15), but it may occur with varying degrees among dimensions and subpopulations. The highest stability was found for the Warmth parenting dimension, but a subgroup of "unstably cold" parents could be identified. Stability needs to be taken into account when interpreting longitudinal research on parenting and when planning and evaluating parenting interventions in research and clinical practice. PMID:21609442

The relationship between allometry and preferred transition speed in human locomotion.

PubMed

Ranisavljev, Igor; Ilic, Vladimir; Soldatovic, Ivan; Stefanovic, Djordje

2014-04-01

The purpose of this study was to explore the relationships between preferred transition speed (PTS) and anthropometric characteristics, body composition and different human body proportions in males. In a sample of 59 male students, we collected anthropometric and body composition data and determined individual PTS using increment protocol. The relationships between PTS and other variables were determined using Pearson correlation, stepwise linear and hierarchical regression. Body ratios were formed as quotient of two variables whereby at least one significantly correlated to PTS. Circular and transversal (except bitrochanteric diameter) body dimensions did not correlate with PTS. Moderate correlations were found between longitudinal leg dimensions (foot, leg and thigh length) and PTS, while the highest correlation was found for lower leg length (r=.488, p<.01). Two parameters related to body composition showed weak correlation with PTS: body fat mass (r=-.250, p<.05) and amount of lean leg mass scaled to body weight (r=.309, p<.05). Segmental body proportions correlated more significantly with PTS, where thigh/lower leg length ratio showed the highest correlation (r=.521, p<.01). Prediction model with individual variables (lower leg and foot length) have explained just 31% of PTS variability, while model with body proportions showed almost 20% better prediction (R(2)=.504). These results suggests that longitudinal leg dimensions have moderate influence on PTS and that segmental body proportions significantly more explain PTS than single anthropometric variables. Copyright © 2014 Elsevier B.V. All rights reserved.

Maternal Expectations for Toddlers’ Reactions to Novelty: Relations of Maternal Internalizing Symptoms and Parenting Dimensions to Expectations and Accuracy of Expectations

PubMed Central

Kiel, Elizabeth J.; Buss, Kristin A.

2010-01-01

SYNOPSIS Objective Although maternal internalizing symptoms and parenting dimensions have been linked to reports and perceptions of children’s behavior, it remains relatively unknown whether these characteristics relate to expectations or the accuracy of expectations for toddlers’ responses to novel situations. Design A community sample of 117 mother-toddler dyads participated in a laboratory visit and questionnaire completion. At the laboratory, mothers were interviewed about their expectations for their toddlers’ behaviors in a variety of novel tasks; toddlers then participated in these activities, and trained coders scored their behaviors. Mothers completed questionnaires assessing demographics, depressive and worry symptoms, and parenting dimensions. Results Mothers who reported more worry expected their toddlers to display more fearful behavior during the laboratory tasks, but worry did not moderate how accurately maternal expectations predicted toddlers’ observed behavior. When also reporting a low level of authoritative-responsive parenting, maternal depressive symptoms moderated the association between maternal expectations and observed toddler behavior, such that, as depressive symptoms increased, maternal expectations related less strongly to toddler behavior. Conclusions When mothers were asked about their expectations for their toddlers’ behavior in the same novel situations from which experimenters observe this behavior, symptoms and parenting had minimal effect on the accuracy of mothers’ expectations. When in the context of low authoritative-responsive parenting, however, depressive symptoms related to less accurate predictions of their toddlers’ fearful behavior. PMID:21037974

Dimensions of biodiversity in the Earth mycobiome.

PubMed

Peay, Kabir G; Kennedy, Peter G; Talbot, Jennifer M

2016-07-01

Fungi represent a large proportion of the genetic diversity on Earth and fungal activity influences the structure of plant and animal communities, as well as rates of ecosystem processes. Large-scale DNA-sequencing datasets are beginning to reveal the dimensions of fungal biodiversity, which seem to be fundamentally different to bacteria, plants and animals. In this Review, we describe the patterns of fungal biodiversity that have been revealed by molecular-based studies. Furthermore, we consider the evidence that supports the roles of different candidate drivers of fungal diversity at a range of spatial scales, as well as the role of dispersal limitation in maintaining regional endemism and influencing local community assembly. Finally, we discuss the ecological mechanisms that are likely to be responsible for the high heterogeneity that is observed in fungal communities at local scales.

Bilateral deficits in fine motor control and pinch grip force are not associated with electrodiagnostic findings in women with carpal tunnel syndrome.

PubMed

de la Llave-Rincón, Ana Isabel; Fernández-de-Las-Peñas, César; Pérez-de-Heredia-Torres, Marta; Martínez-Perez, Almudena; Valenza, Marie Carmen; Pareja, Juan A

2011-06-01

: The aim of this study was to analyze the differences in deficits in fine motor control and pinch grip force between patients with minimal, moderate/mild, or severe carpal tunnel syndrome (CTS) and healthy age- and hand dominance-matched controls. : A case-control study was conducted. The subtests of the Purdue Pegboard Test (one-hand and bilateral pin placements and assemblies) and pinch grip force between the thumb and the remaining four fingers of the hand were bilaterally evaluated in 66 women with minimal (n = 16), moderate (n = 16), or severe (n = 34) CTS and in 20 age- and hand-matched healthy women. The differences among the groups were analyzed using different mixed models of analysis of variance. : A two-way mixed analysis of variance revealed significant differences between groups, not depending on the presence of unilateral or bilateral symptoms (side), for the one-hand pin placement subtest: patients showed bilateral lower scores compared with controls (P < 0.001), without differences among those with minimal, moderate, or severe CTS (P = 0.946). The patients also exhibited lower scores in bilateral pin placement (P < 0.001) and assembly (P < 0.001) subtests, without differences among them. The three-way analysis of variance revealed significant differences among groups (P < 0.001) and fingers (P < 0.001), not depending on the presence of unilateral/bilateral symptoms (P = 0.684), for pinch grip force: patients showed bilateral lower pinch grip force in all fingers compared with healthy controls, without differences among those with minimal, moderate, or severe CTS. : The current study revealed similar bilateral deficits in fine motor control and pinch grip force in patients with minimal, moderate, or severe CTS, supporting that fine motor control deficits are a common feature of CTS not associated with electrodiagnostic findings.

An anthropometric data bank for the Iranian working population with ethnic diversity.

PubMed

Sadeghi, Fatemeh; Mazloumi, Adel; Kazemi, Zeinab

2015-05-01

This study constructed an anthropometric data bank for the Iranian working population. In total, thirty-seven body dimensions were measured among 3720 Iranian workers with different ethnicities (3000 male and 720 female; aged 20-60 years). Statistical analysis revealed significant differences for most of body dimensions among the ethnical groups. Moreover, the authors compared Iranian anthropometric characteristics with those of four Asian populations: Taiwanese, Chinese, Japanese, and Korean. Overall, 16 body dimensions for the five Asian populations were selected and compared. Accordingly, different morphological characteristics of these five populations were observed. The Iranian population showed wide shoulders and hips and long legs; the Chinese population showed narrow hips and shoulders and a short height relative to the other populations. The Korean sample recorded moderate body size comparing the other populations. The Taiwanese had large hands, relatively wide shoulders and short upper limbs. These differences in population dimensions should be taken into consideration for product and process design when expanding regional markets. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Extracting the Evaluations of Stereotypes: Bi-factor Model of the Stereotype Content Structure

PubMed Central

Sayans-Jiménez, Pablo; Cuadrado, Isabel; Rojas, Antonio J.; Barrada, Juan R.

2017-01-01

Stereotype dimensions—competence, morality and sociability—are fundamental to studying the perception of other groups. These dimensions have shown moderate/high positive correlations with each other that do not reflect the theoretical expectations. The explanation for this (e.g., halo effect) undervalues the utility of the shared variance identified. In contrast, in this work we propose that this common variance could represent the global evaluation of the perceived group. Bi-factor models are proposed to improve the internal structure and to take advantage of the information representing the shared variance among dimensions. Bi-factor models were compared with first order models and other alternative models in three large samples (300–309 participants). The relationships among the global and specific bi-factor dimensions with a global evaluation dimension (measured through a semantic differential) were estimated. The results support the use of bi-factor models rather than first order models (and other alternative models). Bi-factor models also show a greater utility to directly and more easily explore the stereotype content including its evaluative content. PMID:29085313

Switching on/off the chemisorption of thioctic-based self-assembled monolayers on gold by applying a moderate cathodic/anodic potential.

PubMed

Sahli, Rihab; Fave, Claire; Raouafi, Noureddine; Boujlel, Khaled; Schöllhorn, Bernd; Limoges, Benoît

2013-04-30

An in situ and real-time electrochemical method has been devised for quantitatively monitoring the self-assembly of a ferrocene-labeled cyclic disulfide derivative (i.e., a thioctic acid derivative) on a polycrystalline gold electrode under electrode polarization. Taking advantage of the high sensitivity, specificity, accuracy, and temporal resolution of this method, we were able to demonstrate an unexpectedly facilitated formation of the redox-active SAM when the electrode was held at a moderate cathodic potential (-0.4 V vs SCE in CH3CN), affording a saturated monolayer from only micromolar solutions in less than 10 min, and a totally impeded SAM growth when the electrode was polarized at a slightly anodic potential (+0.5 V vs SCE in CH3CN). This method literally allows for switching on/off the formation of SAMs under "soft" conditions. Moreover the cyclic disulfide-based SAM was completely desorbed at this potential contrary to the facilitated deposition of a ferrocene-labeled alkanethiol. Such a strikingly contrasting behavior could be explained by an energetically favored release of the thioctic-based SAM through homolytic cleavage of the Au-S bond followed by intramolecular cyclization of the generated thiyl diradicals. Moreover, the absence of a discernible transient faradaic current response during the potential-assisted adsorption/desorption of the redox-labeled cyclic disulfide led us to conclude in a potential-dependent reversible surface reaction where no electron is released or consumed. These results provide new insights into the formation of disulfide-based SAMs on gold but also raise some fundamental questions about the intimate mechanism involved in the facilitated adsorption/desorption of SAMs under electrode polarization. Finally, the possibility to easily and selectively address the formation/removal of thioctic-based SAMs on gold by applying a moderate cathodic/anodic potential offers another degree of freedom in tailoring their properties and in controlling their self-assembly, nanostructuration, and/or release.

Thermally driven piston assembly and position control therefor

NASA Technical Reports Server (NTRS)

Thomsen, III, Donald L. (Inventor); Bryant, Robert G. (Inventor)

2010-01-01

A thermally driven piston assembly's housing has (i) a first material slidingly fitted therein, and (ii) at least one plug of a second material slidingly fitted therein and abutting the first material. The first material is one (e.g., a liquid crystal elastomer) that undergoes a stiffness change and/or a dimensional change when subjected to a temperature change in the temperature range of interest. When subjected to the temperature change while in the housing, the first material is restricted to changing dimensionally along a single dimension. The second material retains its shape and size throughout the temperature range of interest. As a result, the plug moves in the housing in correspondence with the dimensional change of the first material or the plug's movement is damped by the stiffness change of the first material.

Covalently Interlocked Cyclohexa-m-phenylenes and Their Assembly: En Route to Supramolecular 3D Carbon Nanostructures.

PubMed

Dumslaff, Bastian; Reuss, Anna N; Wagner, Manfred; Feng, Xinliang; Narita, Akimitsu; Fytas, George; Müllen, Klaus

2017-08-21

In our search to cluster as many phenylene units as possible in a given space, we have proceeded to the three-dimensional world of benzene-based molecules by employing covalently interlocked cyclohexa-m-phenylenes, as present in the unique paddlewheel-shaped polyphenylene 10. A precursor was conceived, in which freely rotating m-chlorophenylene units provide sufficient solubility along with the necessary proximity for the final ring closure to give 10. Monitoring the assembly of solubilized tert-butyl derivatives of 10 into supramolecular carbon nanostructures by dynamic light scattering (DLS) and Brillouin light scattering (BLS) revealed the dimensions of the initially formed aggregates as well as the amorphous character of the solid state. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Non-Covalent Microgel Particles Containing Functional Payloads: Coacervation of PEG-Based Triblocks via Microfluidics.

PubMed

Wang, Cynthia X; Utech, Stefanie; Gopez, Jeffrey D; Mabesoone, Mathijs F J; Hawker, Craig J; Klinger, Daniel

2016-07-06

Well-defined microgel particles were prepared by combining coacervate-driven cross-linking of ionic triblock copolymers with the ability to control particle size and encapsulate functional cargos inherent in microfluidic devices. In this approach, the efficient assembly of PEO-based triblock copolymers with oppositely charged end-blocks allows for bioinspired cross-linking under mild conditions in dispersed aqueous droplets. This strategy enables the integration of charged cargos into the coacervate domains (e.g., the loading of anionic model compounds through electrostatic association with cationic end-blocks). Distinct release profiles can be realized by systematically varying the chemical nature of the payload and the microgel dimensions. This mild and noncovalent assembly method represents a promising new approach to tunable microgels as scaffolds for colloidal biomaterials in therapeutics and regenerative medicine.

Organic Chemistry in Two Dimensions: Surface-Functionalized Polymers and Self-Assembled Monolayer Films

DTIC Science & Technology

1988-09-01

surfaces as components of materials . In particular, we hope to develop the ability to rationalize and predict the macroscooic properties of surfaces...of much of the current research in areas such as materials science, condensed matter and device physics, and polymer physical chemistry. Surface...6 Underlying our program in surface chemistry is a broad interest in the prop- erties of organic surfaces as components of materials . In particular

Fabrication of two one-fifth scale fiber composite flywheels

NASA Astrophysics Data System (ADS)

1980-04-01

Two fiber composite flywheel rotors were fabricated. These flywheels are scaled down versions of two automotive flywheels built for Sandia Laboratories. The flywheels store a maximum of 0.97 kWh of kinetic energy. Energy density is 87 Wh/kg at the maximum operating speed of 56,000 rpm. The nominal flywheel dimensions are 35 cm diameter by 13 cm axial height. The weight of the flywheel rotor assembly is 11.16 kg.

Pavlovian Fear Conditioning Activates a Common Pattern of Neurons in the Lateral Amygdala of Individual Brains

DTIC Science & Technology

2011-01-12

Abstract Understanding the physical encoding of a memory (the engram ) is a fundamental question in neuroscience. Although it has been established...assembly constitutes a spatial dimension of the engram . Citation: Bergstrom HC, McDonald CG, Johnson LR (2011) Pavlovian Fear Conditioning Activates a Common...competing interests exist. * E-mail: LukeJohnsonPhD@gmail.com Introduction Understanding the physical encoding of a memory (the engram ) in neuronal

Middle School Students' Perceptions of the Quality of School Life in Ankara

ERIC Educational Resources Information Center

Eres, Figen; Bilasa, Pinar

2016-01-01

The aim of this research is to measure the perception of middle school students in Ankara regarding the quality of school life. According to the findings obtained, the students have moderate level perceptions about the quality of school life. Their perceptions about sub-dimensions vary. While the students have the highest perceptions about…

Relationships between a Social-Emotional Learning Program and Emotional Intelligence in Middle School Students

ERIC Educational Resources Information Center

Brown, Katherine Marie

2013-01-01

This study examined the relationships between a social-emotional learning program and the 5 dimensions of emotional intelligence and whether the relationships were moderated by gender. The problem addressed in the study was the lack of research focused on the development of emotional intelligence at the middle school level. The participants…

Explaining IT Professionals' Organizational Commitment Based on Age, Gender, and Personality Trait Factor

ERIC Educational Resources Information Center

Syed, Javaid A.

2017-01-01

The purpose of the present study was to test the Emotional Stability dimension of the Big Five factors of personality traits theory to predict or explain a relationship with Employee Organizational Commitment, when the relationship between Emotional Stability (ES) and Employee Organizational Commitment (EOC) was moderated by Gender and AgeGroup.…

The Trajectories of Adolescents' Perceptions of School Climate, Deviant Peer Affiliation, and Behavioral Problems during the Middle School Years

ERIC Educational Resources Information Center

Wang, Ming-Te; Dishion, Thomas J.

2012-01-01

This longitudinal study examined trajectories of change in adolescents' perceptions of four dimensions of school climate (academic support, behavior management, teacher social support, and peer social support) and the effects of such trajectories on adolescent problem behaviors. We also tested whether school climate moderated the associations…

De-Novo Assembly and Analysis of the Heterozygous Triploid Genome of the Wine Spoilage Yeast Dekkera bruxellensis AWRI1499

PubMed Central

Chambers, Paul J.; Pretorius, Isak S.

2012-01-01

Despite its industrial importance, the yeast species Dekkera (Brettanomyces) bruxellensis has remained poorly understood at the genetic level. In this study we describe whole genome sequencing and analysis for a prevalent wine spoilage strain, AWRI1499. The 12.7 Mb assembly, consisting of 324 contigs in 99 scaffolds (super-contigs) at 26-fold coverage, exhibits a relatively high density of single nucleotide polymorphisms (SNPs). Haplotype sampling for 1.2% of open reading frames suggested that the D. bruxellensis AWRI1499 genome is comprised of a moderately heterozygous diploid genome, in combination with a divergent haploid genome. Gene content analysis revealed enrichment in membrane proteins, particularly transporters, along with oxidoreductase enzymes. Availability of this assembly and annotation provides a resource for further investigation of genomic organization in this species, and functional characterization of genes that may confer important phenotypic traits. PMID:22470482

Questions of time and affect: a person’s affectivity profile, time perspective, and well-being

PubMed Central

Sailer, Uta; Nima, Ali Al; Archer, Trevor

2016-01-01

Background. A “balanced” time perspective has been suggested to have a positive influence on well-being: a sentimental and positive view of the past (high Past Positive), a less pessimistic attitude toward the past (low Past Negative), the desire of experiencing pleasure with slight concern for future consequences (high Present Hedonistic), a less fatalistic and hopeless view of the future (low Present Fatalistic), and the ability to find reward in achieving specific long-term goals (high Future). We used the affective profiles model (i.e., combinations of individuals’ experience of high/low positive/negative affectivity) to investigate differences between individuals in time perspective dimensions and to investigate if the influence of time perspective dimensions on well-being was moderated by the individual’s type of profile. Method. Participants (N = 720) answered to the Positive Affect Negative Affect Schedule, the Zimbardo Time Perspective Inventory and two measures of well-being: the Temporal Satisfaction with Life Scale and Ryff’s Scales of Psychological Well-Being-short version. A Multivariate Analysis of Variance (MANOVA) was conducted to identify differences in time perspective dimensions and well-being among individuals with distinct affective profiles. Four structural equation models (SEM) were used to investigate which time perspective dimensions predicted well-being for individuals in each profile. Results. Comparisons between individuals at the extreme of the affective profiles model suggested that individuals with a self-fulfilling profile (high positive/low negative affect) were characterized by a “balanced” time perspective and higher well-being compared to individuals with a self-destructive profile (low positive/high negative affect). However, a different pattern emerged when individuals who differed in one affect dimension but matched in the other were compared to each other. For instance, decreases in the past negative time perspective dimension lead to high positive affect when negative affect is high (i.e., self-destructive vs. high affective) but to low negative affect when positive affect was high (i.e., high affective vs. self-fulfilling). The moderation analyses showed, for example, that for individuals with a self-destructive profile, psychological well-being was significantly predicted by the past negative, present fatalistic and future time perspectives. Among individuals with a high affective or a self-fulfilling profile, psychological well-being was significantly predicted by the present fatalistic dimension. Conclusions. The interactions found here go beyond the postulation of a “balanced” time perspective being the only way to promote well-being. Instead, we present a more person-centered approach to achieve higher levels of emotional, cognitive, and psychological well-being. PMID:27019786

Questions of time and affect: a person's affectivity profile, time perspective, and well-being.

PubMed

Garcia, Danilo; Sailer, Uta; Nima, Ali Al; Archer, Trevor

2016-01-01

Background. A "balanced" time perspective has been suggested to have a positive influence on well-being: a sentimental and positive view of the past (high Past Positive), a less pessimistic attitude toward the past (low Past Negative), the desire of experiencing pleasure with slight concern for future consequences (high Present Hedonistic), a less fatalistic and hopeless view of the future (low Present Fatalistic), and the ability to find reward in achieving specific long-term goals (high Future). We used the affective profiles model (i.e., combinations of individuals' experience of high/low positive/negative affectivity) to investigate differences between individuals in time perspective dimensions and to investigate if the influence of time perspective dimensions on well-being was moderated by the individual's type of profile. Method. Participants (N = 720) answered to the Positive Affect Negative Affect Schedule, the Zimbardo Time Perspective Inventory and two measures of well-being: the Temporal Satisfaction with Life Scale and Ryff's Scales of Psychological Well-Being-short version. A Multivariate Analysis of Variance (MANOVA) was conducted to identify differences in time perspective dimensions and well-being among individuals with distinct affective profiles. Four structural equation models (SEM) were used to investigate which time perspective dimensions predicted well-being for individuals in each profile. Results. Comparisons between individuals at the extreme of the affective profiles model suggested that individuals with a self-fulfilling profile (high positive/low negative affect) were characterized by a "balanced" time perspective and higher well-being compared to individuals with a self-destructive profile (low positive/high negative affect). However, a different pattern emerged when individuals who differed in one affect dimension but matched in the other were compared to each other. For instance, decreases in the past negative time perspective dimension lead to high positive affect when negative affect is high (i.e., self-destructive vs. high affective) but to low negative affect when positive affect was high (i.e., high affective vs. self-fulfilling). The moderation analyses showed, for example, that for individuals with a self-destructive profile, psychological well-being was significantly predicted by the past negative, present fatalistic and future time perspectives. Among individuals with a high affective or a self-fulfilling profile, psychological well-being was significantly predicted by the present fatalistic dimension. Conclusions. The interactions found here go beyond the postulation of a "balanced" time perspective being the only way to promote well-being. Instead, we present a more person-centered approach to achieve higher levels of emotional, cognitive, and psychological well-being.

Functional outcome and health-related quality of life 10 years after moderate-to-severe traumatic brain injury.

PubMed

Andelic, N; Hammergren, N; Bautz-Holter, E; Sveen, U; Brunborg, C; Røe, C

2009-07-01

To describe the functional outcome and health-related quality of life (HRQL) 10 years after moderate-to-severe traumatic brain injury (TBI). A retrospective, population-based study of 62 survivors of working-age with moderate-to-severe TBI injured in 1995/1996, and hospitalized at the Trauma Referral Center in Eastern Norway. Functional status was measured by the Glasgow Outcome Scale-Extended (GOS-E). HRQL was assessed by the SF-36 questionnaire. The mean current-age was 40.8 years. The frequency of epilepsy was 19% and the depression rate 31%. A majority had good recovery (48%) or moderate disability (44%). Employment rate was 58%. Functional and employment status were associated with initial injury severity in contrast to HRQL. Study patients had significantly lower scores in all SF-36 dimensions when compared with the general Norwegian population. At 10-years follow-up, our study population is still in their most productive years and affected domains should be considered in long-term follow-up and intervention programs.

Intersections of Home, Health, and Social Engagement in Old Age: Formal Volunteering as a Protective Factor to Health After Relocation.

PubMed

Gonzales, Ernest; Shen, Huei-Wern; Perry, Tam E; Wang, Yi

2018-01-01

This study aims to further our understanding of formal volunteering as a protective mechanism for health in the context of housing relocation and to explore race, gender, and education as moderators. A quasi-experimental design evaluated the effects of volunteering on older adults' health (self-report health, number of instrumental activities of daily living [IADLs], and depressive symptoms) among individuals who relocated but did not volunteer at Time 1 ( N = 682) in the Health and Retirement Study (2008-2010). Propensity score weighting examined health differences at Time 2 between 166 volunteers (treated) and 516 nonvolunteers (controlled). Interaction terms tested moderation. Individuals who moved and engaged in volunteering reported higher levels of self-rated health and fewer IADL difficulties compared to the control group. Race moderated the relationship between volunteering and depressive symptoms, while gender moderated the relationship between volunteering and self-assessed health. Formal volunteering protects different dimensions of health after relocation. Volunteering was particularly beneficial for females and older Whites.

Crowding and experience-use history: a study of the moderating effect of place attachment among water-based recreationists.

PubMed

Budruk, Megha; Wilhem Stanis, Sonja A; Schneider, Ingrid E; Heisey, Jennifer J

2008-04-01

Effective recreation resource management relies on understanding visitor perceptions and behaviors. Given current and increasing pressures on water resources, understanding crowding evaluations seems important. Beyond crowding, however, variables that possibly relate to or influence crowding are of interest and in particular, place attachment and experience-use history (EUH). As EUH is related to place attachment and likely affects crowding, this study explored the moderating effect of place attachment dimensions on the relationships between EUH and visitor crowding evaluations. Water based recreationists at a U.S. Army Corps of Engineers site were contacted onsite and asked questions related to experience-use history, crowding evaluations, place attachment, and activity participation. Anglers and campers at the site identified similar crowding perceptions and place attachments. Only one of eight models tested revealed a moderating effect. Specifically, place identity moderated the relationship between the total times visited in the past twelve months and expected crowding among anglers. As such, the quest continues to understand the relationship among these important variables.

Super-leadership and work enjoyment: direct and moderated influences.

PubMed

Müller, Günter F; Georgianna, Sibylle; Schermelleh-Engel, Karin; Roth, Anne C; Schreiber, Walter A; Sauerland, Martin; Muessigmann, Michael J; Jilg, Franziska

2013-12-01

Super-leadership is part of an approach called 'empowering leadership.' Within this approach, super-leadership is assumed to enable subordinates to lead themselves. The current study examined correlates of super-leadership. A questionnaire measuring two dimensions of super-leadership was used to analyze relationships between super-leadership and subordinates' work enjoyment, i.e., job satisfaction, subjective well-being, and emotional organizational commitment. In addition, moderating effects of the organizational context, i.e., organizational decentralization, on the relationships between super-leadership and work enjoyment were explored. 198 German employees from different occupations participated in the study. Latent moderator structural equation analysis revealed that the two factors of super-leadership, "coaching and communicative support" and "facilitation of personal autonomy and responsibility," had direct positive effects on subordinates' work enjoyment. Organizational decentralization moderated the effect of "coaching and communicative support" on work enjoyment but not the relations involving "facilitation of personal autonomy and responsibility." Conclusions for further research and practical applications were discussed.

Racial Barrier Socialization and the Well-being of African American Adolescents: The Moderating Role of Mother-Adolescent Relationship Quality

PubMed Central

Cooper, Shauna M.; McLoyd, Vonnie C.

2012-01-01

Racial socialization has been suggested as an important factor in helping African American adolescents cope effectively with racism and discrimination. Although multiple studies have reported a positive link between racial pride socialization and psychological adjustment among African American youth, assessments of the association between adolescent adjustment and another dimension of racial socialization—racial barrier socialization—have yielded inconsistent findings. Using a sample of 190 African American adolescents, the present study focuses attention on the quality of mother-adolescent relations as an indicator of affective context, and examines its moderating influence on the association between racial barrier socialization and adolescent adjustment. Regression analyses indicated that the link between racial barrier socialization and adolescent adjustment is moderated by mother-adolescent relationship quality. However, these associations varied by gender. PMID:23152648

Neutronics Benchmarks for the Utilization of Mixed-Oxide Fuel: Joint U.S./ Russian Progress Report for Fiscal Year 1997, Volume 4, Part 8 - Neutron Poison Plates in Assemblies Containing Homogeneous Mixtures of Polystyrene-Moderated Plutonium and Uranium Oxides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yavuz, M.

1999-05-01

In the 1970s at the Battelle Pacific Northwest Laboratory (PNL), a series of critical experiments using a remotely operated Split-Table Machine was performed with homogeneous mixtures of (Pu-U)O{sub 2}-polystyrene fuels in the form of square compacts having different heights. The experiments determined the critical geometric configurations of MOX fuel assemblies with and without neutron poison plates. With respect to PuO{sub 2} content and moderation [H/(Pu+U)atomic] ratio (MR), two different homogeneous (Pu-U) O{sub 2}-polystyrene mixtures were considered: Mixture (1) 14.62 wt% PuO{sub 2} with 30.6 MR, and Mixture (2) 30.3 wt% PuO{sub 2} with 2.8 MR. In all mixtures, the uraniummore » was depleted to about O.151 wt% U{sup 235}. Assemblies contained copper, copper-cadmium or aluminum neutron poison plates having thicknesses up to {approximately}2.5 cm. This evaluation contains 22 experiments for Mixture 1, and 10 for Mixture 2 compacts. For Mixture 1, there are 10 configurations with copper plates, 6 with aluminum, and 5 with copper-cadmium. One experiment contained no poison plate. For Mixture 2 compacts, there are 3 configurations with copper, 3 with aluminum, and 3 with copper-cadmium poison plates. One experiment contained no poison plate.« less

NEUTRONIC REACTOR

DOEpatents

Stewart, H.B.

1958-12-23

A nuclear reactor of the type speclfically designed for the irradiation of materials is discussed. In this design a central cyllndrical core of moderating material ls surrounded by an active portlon comprlsed of an annular tank contalning fissionable material immersed ln a liquid moderator. The active portion ls ln turn surrounded by a reflector, and a well ls provided in the center of the core to accommodate the materlals to be irradiated. The over-all dimensions of the core ln at least one plane are equal to or greater than twice the effective slowing down length and equal to or less than twlce the effective diffuslon length for neutrons in the core materials.

RADseq dataset with 90% missing data fully resolves recent radiation of Petalidium (Acanthaceae) in the ultra-arid deserts of Namibia.

PubMed

Tripp, Erin A; Tsai, Yi-Hsin Erica; Zhuang, Yongbin; Dexter, Kyle G

2017-10-01

Deserts, even those at tropical latitudes, often have strikingly low levels of plant diversity, particularly within genera. One remarkable exception to this pattern is the genus Petalidium (Acanthaceae), in which 37 of 40 named species occupy one of the driest environments on Earth, the Namib Desert of Namibia and neighboring Angola. To contribute to understanding this enigmatic diversity, we generated RADseq data for 47 accessions of Petalidium representing 22 species. We explored the impacts of 18 different combinations of assembly parameters in de novo assembly of the data across nine levels of missing data plus a best practice assembly using a reference Acanthaceae genome for a total of 171 sequence datasets assembled. RADseq data assembled at several thresholds of missing data, including 90% missing data, yielded phylogenetic hypotheses of Petalidium that were confidently and nearly fully resolved, which is notable given that divergence time analyses suggest a crown age for African species of 3.6-1.4 Ma. De novo assembly of our data yielded the most strongly supported and well-resolved topologies; in contrast, reference-based assembly performed poorly, perhaps due in part to moderate phylogenetic divergence between the reference genome, Ruellia speciosa , and the ingroup. Overall, we found that Petalidium , despite the harshness of the environment in which species occur, shows a net diversification rate (0.8-2.1 species per my) on par with those of diverse genera in tropical, Mediterranean, and alpine environments.

Fast-SG: an alignment-free algorithm for hybrid assembly.

PubMed

Di Genova, Alex; Ruz, Gonzalo A; Sagot, Marie-France; Maass, Alejandro

2018-05-01

Long-read sequencing technologies are the ultimate solution for genome repeats, allowing near reference-level reconstructions of large genomes. However, long-read de novo assembly pipelines are computationally intense and require a considerable amount of coverage, thereby hindering their broad application to the assembly of large genomes. Alternatively, hybrid assembly methods that combine short- and long-read sequencing technologies can reduce the time and cost required to produce de novo assemblies of large genomes. Here, we propose a new method, called Fast-SG, that uses a new ultrafast alignment-free algorithm specifically designed for constructing a scaffolding graph using light-weight data structures. Fast-SG can construct the graph from either short or long reads. This allows the reuse of efficient algorithms designed for short-read data and permits the definition of novel modular hybrid assembly pipelines. Using comprehensive standard datasets and benchmarks, we show how Fast-SG outperforms the state-of-the-art short-read aligners when building the scaffoldinggraph and can be used to extract linking information from either raw or error-corrected long reads. We also show how a hybrid assembly approach using Fast-SG with shallow long-read coverage (5X) and moderate computational resources can produce long-range and accurate reconstructions of the genomes of Arabidopsis thaliana (Ler-0) and human (NA12878). Fast-SG opens a door to achieve accurate hybrid long-range reconstructions of large genomes with low effort, high portability, and low cost.

Fuel assembly design for APR1400 with low CBC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hah, Chang Joo, E-mail: changhah@kings.ac.kr

2015-04-29

APR 1400 is a PWR (Pressurized Water Reactor) with rated power of 3983 MWth and 241 assemblies. Recently, demand for extremely longer cycle up to 24 months is increasing with challenge of higher critical boron concentration (CBC). In this paper, assembly design method of selecting Gd-rods is introduced to reduce CBC. The purpose of the method is to lower the critical boron concentration of the preliminary core loading pattern (PLP), and consequently to achieve more negative or less positive moderator temperature coefficient (MTC). In this method, both the ratio of the number of low-Gd rod to the number of high-Gdmore » rod (r) and assembly average Gd wt% (w) are the decision variables. The target function is the amount of soluble boron concentration reduction, which can be converted to Δk{sub TARGET}. A set of new designed fuel assembly satisfies an objective function, min [f=∑{sub i}(Δk{sub FA}−Δk{sub i})], and enables a final loading pattern to reach a target CBC. The constraints required to determine a set of Δk are physically realizable pair, (r,w), and the sum of Δk of new designed assemblies as close to Δk{sub TARGET} as possible. New Gd-bearing assemblies selected based on valid pairs of (r,w) are replaced with existing assemblies in a PLP. This design methodology is applied to Shin-Kori Unit 3 Cycle 1 used as a reference model. CASMO-3/MASTER code is used for depletion calculation. CASMO-3/MASTER calculations with new designed assemblies produce lower CBC than the expected CBC, proving that the proposed method works successful.« less

Stepwise assembly of a semiconducting coordination polymer [Cd8S(SPh)14(DMF)(bpy)]n and its photodegradation of organic dyes.

PubMed

Xu, Chao; Hedin, Niklas; Shi, Hua-Tian; Xin, ZhiFeng; Zhang, Qian-Feng

2015-04-14

Chalcogenolate clusters can be interlinked with organic linkers into semiconducting coordination polymers with photocatalytic properties. Here, discrete clusters of Cd8S(SPh)14(DMF)3 were interlinked with 4,4'-bipyridine into a one dimensional coordination polymer of [Cd8S(SPh)14(DMF)(bpy)]n with helical chains. A stepwise mechanism for the assembly of the coordination polymer in DMF was revealed by an ex situ dynamic light scattering study. The cluster was electrostatically neutral and showed a penta-supertetrahedral structure. During the assembly each cluster was interlinked with two 4,4'-bipyridine molecules, which replaced the two terminal DMF molecules of the clusters. In their solid-state forms, the cluster and the coordination polymer were semiconductors with wide band gaps of 3.08 and 2.80 ev. They photocatalytically degraded rhodamine B and methylene blue in aqueous solutions. The moderate conditions used for the synthesis could allow for further in situ studies of the reaction-assembly of related clusters and coordination polymers.

The Stokes-Einstein relation at moderate Schmidt number.

PubMed

Balboa Usabiaga, Florencio; Xie, Xiaoyi; Delgado-Buscalioni, Rafael; Donev, Aleksandar

2013-12-07

The Stokes-Einstein relation for the self-diffusion coefficient of a spherical particle suspended in an incompressible fluid is an asymptotic result in the limit of large Schmidt number, that is, when momentum diffuses much faster than the particle. When the Schmidt number is moderate, which happens in most particle methods for hydrodynamics, deviations from the Stokes-Einstein prediction are expected. We study these corrections computationally using a recently developed minimally resolved method for coupling particles to an incompressible fluctuating fluid in both two and three dimensions. We find that for moderate Schmidt numbers the diffusion coefficient is reduced relative to the Stokes-Einstein prediction by an amount inversely proportional to the Schmidt number in both two and three dimensions. We find, however, that the Einstein formula is obeyed at all Schmidt numbers, consistent with linear response theory. The mismatch arises because thermal fluctuations affect the drag coefficient for a particle due to the nonlinear nature of the fluid-particle coupling. The numerical data are in good agreement with an approximate self-consistent theory, which can be used to estimate finite-Schmidt number corrections in a variety of methods. Our results indicate that the corrections to the Stokes-Einstein formula come primarily from the fact that the particle itself diffuses together with the momentum. Our study separates effects coming from corrections to no-slip hydrodynamics from those of finite separation of time scales, allowing for a better understanding of widely observed deviations from the Stokes-Einstein prediction in particle methods such as molecular dynamics.

Trust and team performance: A meta-analysis of main effects, moderators, and covariates.

PubMed

De Jong, Bart A; Dirks, Kurt T; Gillespie, Nicole

2016-08-01

Cumulating evidence from 112 independent studies (N = 7,763 teams), we meta-analytically examine the fundamental questions of whether intrateam trust is positively related to team performance, and the conditions under which it is particularly important. We address these questions by analyzing the overall trust-performance relationship, assessing the robustness of this relationship by controlling for other relevant predictors and covariates, and examining how the strength of this relationship varies as a function of several moderating factors. Our findings confirm that intrateam trust is positively related to team performance, and has an above-average impact (ρ = .30). The covariate analyses show that this relationship holds after controlling for team trust in leader and past team performance, and across dimensions of trust (i.e., cognitive and affective). The moderator analyses indicate that the trust-performance relationship is contingent upon the level of task interdependence, authority differentiation, and skill differentiation in teams. Finally, we conducted preliminary analyses on several emerging issues in the literature regarding the conceptualization and measurement of trust and team performance (i.e., referent of intrateam trust, dimension of performance, performance objectivity). Together, our findings contribute to the literature by helping to (a) integrate the field of intrateam trust research, (b) resolve mixed findings regarding the trust-performance relationship, (c) overcome scholarly skepticism regarding the main effect of trust on team performance, and (d) identify the conditions under which trust is most important for team performance. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Parental ethnic-racial socialization and social attitudes among ethnic-racial minority and White American emerging adults.

PubMed

Tran, Alisia G T T; Mintert, Jeffrey S; Jew, Gilbert B

2017-01-01

This article utilizes moderated mediation analyses to explore whether the relations between parental ethnic-racial socialization (PERS) dimensions and social attitudes differ across ethnic-racial minority (n = 128) and White (n = 131) college-going emerging adults. We examined social dominance orientation (SDO) as an index of antiegalitarian intergroup attitudes and attitudes toward interpersonal harmony as an index of interpersonal attitudes. We tested whether there were ethnic-racial variations in mediation models in which each type of PERS dimension was expected to be linked to greater antiegalitarian attitudes (greater SDO), which, in turn, was predicted to be associated with less prosocial attitudes (lower harmony enhancement). Results indicated that more frequent cultural socialization and preparation for bias were linked to greater SDO for the White sample, but not for the ethnic-minority sample. Moderation results were nonsignificant for promotion of mistrust, with results indicating a positive link to SDO, regardless of racial-ethnic status. Moderated mediation analyses further revealed indirect effects of cultural socialization and preparation for bias on interpersonal attitudes through SDO for the White sample, but not for the ethnic-minority sample. Specifically, greater cultural socialization and preparation for bias each were linked to greater SDO, which, in turn, was associated with less positive perceptions of the value of maintaining interpersonal harmony for White respondents. Practical applications, including social justice implications, of the results and possibilities for future research are discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Ultrathin gold nanoribbons synthesized within the interior cavity of a self-assembled peptide nanoarchitecture.

PubMed

Tomizaki, Kin-ya; Wakizaka, Shota; Yamaguchi, Yuichi; Kobayashi, Akitsugu; Imai, Takahito

2014-01-28

There is increasing interest in gold nanocrystals due to their unique physical, chemical, and biocompatible properties. In order to develop a template-assisted method for the fabrication of gold nanocrystals, we demonstrate here the de novo design and synthesis of a β-sheet-forming nonapeptide (RU006: Ac-AIAKAXKIA-NH2, X = L-2-naphthylalanine) which undergoes self-assembly to form disk-like nanoarchitectures approximately 100 nm wide and 2.5 nm high. These self-assemblies tend to form a network of higher-order assemblies in ultrapure water. Using RU006 as a template molecule, we fabricated ultrathin gold nanoribbons 50-100 nm wide, 2.5 nm high, and micrometers long without external reductants. Furthermore, in order to determine the mechanism of ultrathin gold nanoribbon formation, we synthesized four different RU006 analogues. On the basis of the results obtained using RU006 and these analogues, we propose the following mechanism for the self-assembly of RU006. First, RU006 forms a network by the cooperative association of disk-like assemblies in the presence of AuCl4(-) ions that are encapsulated and concentrated within the interior cavity of the network architectures. This is followed by electron transfer from the naphthalene rings to Au(III), resulting in slow growth to form ultrathin gold nanoribbons along the template network architectures under ambient conditions. The resulting ribbons retain the dimensions of the cavity of the template architecture. Our approach will allow the construction of diverse template architectural morphologies and will find applications in the construction of a variety of metallic nanoarchitectures.

Definition of a visuospatial dimension as a step forward in the diagnostic puzzle of nonverbal learning disability.

PubMed

Poletti, Michele

2017-01-01

Although clinically recognized for almost 50 years, the categorical distinction of specific learning disabilities due to an impairment of the nonverbal domain (nonverbal learning disability [NLD]) is still debated and controversial. Unsolved issues involve theoretical models, diagnostic criteria, rehabilitative interventions, and moderator factors. These issues are briefly overviewed to sustain the need for a shift toward dimensional approaches, as suggested by research domain criteria, as a step forward in the diagnostic puzzle of NLD. With this aim, a visuospatial dimension, or spectrum, is proposed, and then clinical conditions that may fit with its impaired side are systemized, while specifying in which conditions a visuospatial impairment may be considered an NLD.

Shared Leadership Improves Team Novelty: The Mechanism and Its Boundary Condition

PubMed Central

Sun, Xiaomin; Jie, Yuan; Wang, Yilu; Xue, Gang; Liu, Yan

2016-01-01

Previous research has revealed the significant impact of shared leadership on team creativity, yet the mechanism underlying this relationship has rarely been investigated. The current research examined how shared leadership influenced team creativity (novelty and usefulness) across 3 studies using both long-term project teams and temporal task teams in the laboratory. The results showed that shared leadership enhanced the novelty dimension of team creativity by improving constructive controversy. Furthermore, team goal orientation moderated this effect. The indirect effect of constructive controversy holds for teams with learning goal orientation but not for those with performance goal orientation. Such patterns were not found in the usefulness dimension of team creativity. PMID:28066289

Use of Peers to Train and Monitor the Performance of Adolescents with Severe Handicaps.

ERIC Educational Resources Information Center

Wacker, David P.; Berg, Wendy K.

1985-01-01

Two peer trainers, one moderately and one severely mentally retarded, each taught three severely disabled peers to perform separate steps of a complex assembly line task. Peer trainers were taught to demonstrate correct performance and to praise or correct trainees' performance contingently. Trainers were successful in training and monitoring the…

Narcissism dimensions differentially moderate selective attention to evaluative stimuli in incarcerated offenders

PubMed Central

Krusemark, Elizabeth A.; Lee, Christopher; Newman, Joseph P.

2014-01-01

Narcissistic personality disorder is associated with distinguishing traits including self-enhancement, arrogance and intense reactivity to ego threat. Theoretical accounts of narcissism suggest these heterogeneous behaviors reflect a defensive motivational style that functions to both uphold and protect the self-concept. However, the notion that narcissism can be characterized by grandiose and vulnerable dimensions raises the possibility that these diverse behaviors represent distinct expressions of narcissistic defensiveness. The present study examined whether both dimensions exhibit a general defensive style marked by selective attention to evaluative stimuli or are differentially associated with selective attention to positive and negative information, respectively. Using a dot probe task consisting of valenced and neutral trait adjectives, we evaluated these hypotheses in a group of male offenders. Results indicated that vulnerable narcissism was associated with attention biases for both positive and negative stimuli, though the dimension was further distinguished by disengagement difficulties and a greater recognition memory bias in response to negative words. Conversely, grandiose narcissism was associated with increased accuracy when attending to positive stimuli and directing attention away from negative stimuli. Overall, these findings suggest narcissistic individuals share motivated selective attention in response to evaluative stimuli, while simultaneously highlighting important phenotypic differences between grandiose and vulnerable dimensions. PMID:25330183

Narcissism dimensions differentially moderate selective attention to evaluative stimuli in incarcerated offenders.

PubMed

Krusemark, Elizabeth A; Lee, Christopher; Newman, Joseph P

2015-01-01

Narcissistic personality disorder is associated with distinguishing traits including self-enhancement, arrogance, and intense reactivity to ego threat. Theoretical accounts of narcissism suggest these heterogeneous behaviors reflect a defensive motivational style that functions to both uphold and protect the self-concept. However, the notion that narcissism can be characterized by grandiose and vulnerable dimensions raises the possibility that these diverse behaviors represent distinct expressions of narcissistic defensiveness. The present study examined whether both dimensions exhibit a general defensive style marked by selective attention to evaluative stimuli or are differentially associated with selective attention to positive and negative information, respectively. Using a dot probe task consisting of valenced and neutral trait adjectives, we evaluated these hypotheses in a group of male offenders. Results indicated that vulnerable narcissism was associated with attention biases for both positive and negative stimuli, though the dimension was further distinguished by disengagement difficulties and a greater recognition memory bias in response to negative words. Conversely, grandiose narcissism was associated with increased accuracy when attending to positive stimuli and directing attention away from negative stimuli. Overall, these findings suggest narcissistic individuals share motivated selective attention in response to evaluative stimuli, while simultaneously highlighting important phenotypic differences between grandiose and vulnerable dimensions. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

Emotion disrupts neural activity during selective attention in psychopathy

PubMed Central

Spielberg, Jeffrey M.; Heller, Wendy; Herrington, John D.; Engels, Anna S.; Warren, Stacie L.; Crocker, Laura D.; Sutton, Bradley P.; Miller, Gregory A.

2013-01-01

Dimensions of psychopathy are theorized to be associated with distinct cognitive and emotional abnormalities that may represent unique neurobiological risk factors for the disorder. This hypothesis was investigated by examining whether the psychopathic personality dimensions of fearless-dominance and impulsive-antisociality moderated neural activity and behavioral responses associated with selective attention and emotional processing during an emotion-word Stroop task in 49 adults. As predicted, the dimensions evidenced divergent selective-attention deficits and sensitivity to emotional distraction. Fearless-dominance was associated with disrupted attentional control to positive words, and activation in right superior frontal gyrus mediated the relationship between fearless-dominance and errors to positive words. In contrast, impulsive-antisociality evidenced increased behavioral interference to both positive and negative words and correlated positively with recruitment of regions associated with motivational salience (amygdala, orbitofrontal cortex, insula), emotion regulation (temporal cortex, superior frontal gyrus) and attentional control (dorsal anterior cingulate cortex). Individuals high on both dimensions had increased recruitment of regions related to attentional control (temporal cortex, rostral anterior cingulate cortex), response preparation (pre-/post-central gyri) and motivational value (orbitofrontal cortex) in response to negative words. These findings provide evidence that the psychopathy dimensions represent dual sets of risk factors characterized by divergent dysfunction in cognitive and affective processes. PMID:22210673

Correlates of insight into different symptom dimensions in obsessive-compulsive disorder.

PubMed

Fontenelle, Jùlia M; Harrison, Ben J; Santana, Lívia; Conceição do Rosário, Maria; Versiani, Marcio; Fontenelle, Leonardo F

2013-02-01

In this study, we evaluated insight into different obsessive-compulsive disorder (OCD) symptom dimensions and their impact on clinical and sociodemographic features of patients with OCD. Sixty OCD patients were assessed with the Brown Assessment of Beliefs Scale (BABS), the Dimensional Yale-Brown Obsessive-Compulsive Scale-Short Version, the Beck Depression Inventory, and the Sheehan Disability Scale. Two methods of using BABS were employed: 1) a traditional approach, which considers a composite of the insight into existing OCD symptoms, and 2) an alternative approach, which includes assessments of insight into each OCD symptom dimension separately. Composite BABS scores correlated with global severity of OCD and depressive symptoms, and degree of interference on social life/leisure activities and family life/home responsibilities. Dimension-specific correlations between severity of symptoms and insight ranged from very high (P = .87, for hoarding) to moderate (P = .61, for miscellaneous symptoms). Greater severity of depression and concomitant generalized anxiety disorder were independently associated with lower levels of insight into aggressive/checking symptoms. While earlier-onset OCD was associated with lower insight into sexual/religious and symmetry symptoms, later-onset OCD displayed lower insight into hoarding. Assessing insight into dimension-specific OCD symptoms may challenge the existence of clear-cut OCD with fair or poor insight.

Emotion disrupts neural activity during selective attention in psychopathy.

PubMed

Sadeh, Naomi; Spielberg, Jeffrey M; Heller, Wendy; Herrington, John D; Engels, Anna S; Warren, Stacie L; Crocker, Laura D; Sutton, Bradley P; Miller, Gregory A

2013-03-01

Dimensions of psychopathy are theorized to be associated with distinct cognitive and emotional abnormalities that may represent unique neurobiological risk factors for the disorder. This hypothesis was investigated by examining whether the psychopathic personality dimensions of fearless-dominance and impulsive-antisociality moderated neural activity and behavioral responses associated with selective attention and emotional processing during an emotion-word Stroop task in 49 adults. As predicted, the dimensions evidenced divergent selective-attention deficits and sensitivity to emotional distraction. Fearless-dominance was associated with disrupted attentional control to positive words, and activation in right superior frontal gyrus mediated the relationship between fearless-dominance and errors to positive words. In contrast, impulsive-antisociality evidenced increased behavioral interference to both positive and negative words and correlated positively with recruitment of regions associated with motivational salience (amygdala, orbitofrontal cortex, insula), emotion regulation (temporal cortex, superior frontal gyrus) and attentional control (dorsal anterior cingulate cortex). Individuals high on both dimensions had increased recruitment of regions related to attentional control (temporal cortex, rostral anterior cingulate cortex), response preparation (pre-/post-central gyri) and motivational value (orbitofrontal cortex) in response to negative words. These findings provide evidence that the psychopathy dimensions represent dual sets of risk factors characterized by divergent dysfunction in cognitive and affective processes.

Combined effects of positive and negative affectivity and job satisfaction on job performance and turnover intentions.

PubMed

Bouckenooghe, Dave; Raja, Usman; Butt, Arif Nazir

2013-01-01

Capturing data from employee-supervisor dyads (N = 321) from eight organizations in Pakistan, including human service organizations, an electronics assembly plant, a packaging material manufacturing company, and a small food processing plant, we used moderated regression analysis to examine whether the relationships between trait affect (positive affectivity [PA] and negative affectivity [NA]) and two key work outcome variables (job performance and turnover) are contingent upon the level of job satisfaction. We applied the Trait Activation Theory to explain the moderating effect of job satisfaction on the relationship between affect and performance and between affect and turnover. Overall, the data supported our hypotheses. Positive and negative affectivity influenced performance and the intention to quit, and job satisfaction moderated these relationships. We discuss in detail the results of these findings and their implications for research and practice.

A dimension-wise analysis method for the structural-acoustic system with interval parameters

NASA Astrophysics Data System (ADS)

Xu, Menghui; Du, Jianke; Wang, Chong; Li, Yunlong

2017-04-01

The interval structural-acoustic analysis is mainly accomplished by interval and subinterval perturbation methods. Potential limitations for these intrusive methods include overestimation or interval translation effect for the former and prohibitive computational cost for the latter. In this paper, a dimension-wise analysis method is thus proposed to overcome these potential limitations. In this method, a sectional curve of the system response surface along each input dimensionality is firstly extracted, the minimal and maximal points of which are identified based on its Legendre polynomial approximation. And two input vectors, i.e. the minimal and maximal input vectors, are dimension-wisely assembled by the minimal and maximal points of all sectional curves. Finally, the lower and upper bounds of system response are computed by deterministic finite element analysis at the two input vectors. Two numerical examples are studied to demonstrate the effectiveness of the proposed method and show that, compared to the interval and subinterval perturbation method, a better accuracy is achieved without much compromise on efficiency by the proposed method, especially for nonlinear problems with large interval parameters.

Assembly and Self-Assembly of Nanomembrane Materials-From 2D to 3D.

PubMed

Huang, Gaoshan; Mei, Yongfeng

2018-04-01

Nanoscience and nanotechnology offer great opportunities and challenges in both fundamental research and practical applications, which require precise control of building blocks with micro/nanoscale resolution in both individual and mass-production ways. The recent and intensive nanotechnology development gives birth to a new focus on nanomembrane materials, which are defined as structures with thickness limited to about one to several hundred nanometers and with much larger (typically at least two orders of magnitude larger, or even macroscopic scale) lateral dimensions. Nanomembranes can be readily processed in an accurate manner and integrated into functional devices and systems. In this Review, a nanotechnology perspective of nanomembranes is provided, with examples of science and applications in semiconductor, metal, insulator, polymer, and composite materials. Assisted assembly of nanomembranes leads to wrinkled/buckled geometries for flexible electronics and stacked structures for applications in photonics and thermoelectrics. Inspired by kirigami/origami, self-assembled 3D structures are constructed via strain engineering. Many advanced materials have begun to be explored in the format of nanomembranes and extend to biomimetic and 2D materials for various applications. Nanomembranes, as a new type of nanomaterials, allow nanotechnology in a controllable and precise way for practical applications and promise great potential for future nanorelated products. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A fluidic device for the controlled formation and real-time monitoring of soft membranes self-assembled at liquid interfaces.

PubMed

Mendoza-Meinhardt, Arturo; Botto, Lorenzo; Mata, Alvaro

2018-02-13

Membrane materials formed at the interface between two liquids have found applications in a large variety of technologies, from sensors to drug-delivery and catalysis. However, studying the formation of these membranes in real-time presents considerable challenges, owing to the difficulty of prescribing the location and instant of formation of the membrane, the difficulty of observing time-dependent membrane shape and thickness, and the poor reproducibility of results obtained using conventional mixing procedures. Here we report a fluidic device that facilitates characterisation of the time-dependent thickness, morphology and mass transport properties of materials self-assembled at fluid-fluid interfaces. In the proposed device the membrane forms from the controlled coalescence of two liquid menisci in a linear open channel. The linear geometry and controlled mixing of the solutions facilitate real-time visualisation, manipulation and improve reproducibility. Because of its small dimensions, the device can be used in conjunction with standard microscopy methods and reduces the required volumes of potentially expensive reagents. As an example application to tissue engineering, we use the device to characterise interfacial membranes formed by supra-molecular self-assembly of peptide-amphiphiles with either an elastin-like-protein or hyaluronic acid. The device can be adapted to study self-assembling membranes for applications that extend beyond bioengineering.

Preparation and high-performance microwave absorption of hierarchical dendrite-like Co superstructures self-assembly of nanoflakes

NASA Astrophysics Data System (ADS)

Yu, Miao; Wang, Lirui; Yang, Pingan; Fu, Jie

2017-12-01

Dendritic-like Co superstructures based on the self-assembly of nanoflakes that could efficiently suppress the eddy current were successfully synthesized via a facile, rapid, and energy-saving chemical reduction method. Since crystal structure, size, and special geometrical morphology, magnetism have a vital influence on microwave absorption properties, the as-obtained products were characterized by x-ray diffraction, scanning electron microscopy, vibrating sample magnetometry, and vector network analysis. The prepared dendritic Co possesses abundant secondary branches that extend to the 3D space. Their dimensions, spacing, sheet-like blocks, and high-ordering microstructures all contribute to the penetration, scattering, and attenuation of EM waves. The composites present attractive microwave absorption performances in the X band, as well as in the whole S band (2-4 GHz). This work investigates the mechanism of absorption for the as-obtained Co, offers a promising strategy for the fabrication of hierarchical Co microstructure assemblies by multi-leaf flakes and introduces the application of dendritic-like Co as a highly efficient absorber in the S band and X band.

Self-Assembled Layering of Magnetic Nanoparticles in a Ferrofluid on Silicon Surfaces.

PubMed

Theis-Bröhl, Katharina; Vreeland, Erika C; Gomez, Andrew; Huber, Dale L; Saini, Apurve; Wolff, Max; Maranville, Brian B; Brok, Erik; Krycka, Kathryn L; Dura, Joseph A; Borchers, Julie A

2018-02-07

This article describes the three-dimensional self-assembly of monodisperse colloidal magnetite nanoparticles (NPs) from a dilute water-based ferrofluid onto a silicon surface and the dependence of the resultant magnetic structure on the applied field. The NPs assemble into close-packed layers on the surface followed by more loosely packed ones. The magnetic field-dependent magnetization of the individual NP layers depends on both the rotational freedom of the layer and the magnetization of the adjacent layers. For layers in which the NPs are more free to rotate, the easy axis of the NP can readily orient along the field direction. In more dense packing, free rotation of the NPs is hampered, and the NP ensembles likely build up quasi-domain states to minimize energy, which leads to lower magnetization in those layers. Detailed analysis of polarized neutron reflectometry data together with model calculations of the arrangement of the NPs within the layers and input from small-angle scattering measurements provide full characterization of the core/shell NP dimensions, degree of chaining, arrangement of the NPs within the different layers, and magnetization depth profile.

Controlled Nucleation and Growth of DNA Tile Arrays within Prescribed DNA Origami Frames and Their Dynamics

PubMed Central

2015-01-01

Controlled nucleation of nanoscale building blocks by geometrically defined seeds implanted in DNA nanoscaffolds represents a unique strategy to study and understand the dynamic processes of molecular self-assembly. Here we utilize a two-dimensional DNA origami frame with a hollow interior and selectively positioned DNA hybridization seeds to control the self-assembly of DNA tile building blocks, where the small DNA tiles are directed to fill the interior of the frame through prescribed sticky end interactions. This design facilitates the construction of DNA origami/array hybrids that adopt the overall shape and dimensions of the origami frame, forming a 2D array in the core consisting of a large number of simple repeating DNA tiles. The formation of the origami/array hybrid was characterized with atomic force microscopy, and the nucleation dynamics were monitored by serial AFM scanning and fluorescence spectroscopy, which revealed faster kinetics of growth within the frame as compared to growth without the presence of a frame. Our study provides insight into the fundamental behavior of DNA-based self-assembling systems. PMID:24575893

Chlorine condenser-evaporator simulation

NASA Astrophysics Data System (ADS)

Muraveva, E. A.

2017-10-01

Refrigeration machines are an integral part of chemical engineering. Coldness in mechanical engineering is used to improve the properties of steels, to stabilize the shape and size of steel parts, to restore the dimensions of worn steel hardened parts, to fasten the parts to be machined during cutting and grinding, to ensure fixed planting during assembly, bending pipelines, deep drawing and stamping parts from sheet materials, in the manufacture and processing of rubber parts, with solid anodizing of aluminum alloy parts.

Tuning and synthesis of metallic nanostructures by mechanical compression

DOEpatents

Fan, Hongyou; Li, Binsong

2015-11-17

The present invention provides a pressure-induced phase transformation process to engineer metal nanoparticle architectures and to fabricate new nanostructured materials. The reversible changes of the nanoparticle unit cell dimension under pressure allow precise control over interparticle separation in 2D or 3D nanoparticle assemblies, offering unique robustness for interrogation of both quantum and classic coupling interactions. Irreversible changes above a threshold pressure of about 8 GPa enables new nanostructures, such as nanorods, nanowires, or nanosheets.

3D structural patterns in scalable, elastomeric scaffolds guide engineered tissue architecture.

PubMed

Kolewe, Martin E; Park, Hyoungshin; Gray, Caprice; Ye, Xiaofeng; Langer, Robert; Freed, Lisa E

2013-08-27

Microfabricated elastomeric scaffolds with 3D structural patterns are created by semiautomated layer-by-layer assembly of planar polymer sheets with through-pores. The mesoscale interconnected pore architectures governed by the relative alignment of layers are shown to direct cell and muscle-like fiber orientation in both skeletal and cardiac muscle, enabling scale up of tissue constructs towards clinically relevant dimensions. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Is High Self-Esteem a Precondition of "Normal" Behavior?

ERIC Educational Resources Information Center

Vande Kamp, Mark E.; And Others

Self-esteem is widely perceived to be important. This study examined the role of self-esteem as a moderator of social behavior in a sample selected to represent a broad range on the self-esteem dimension. Student subjects representing high, medium, and low levels of self-esteem were selected from a large sample (N=1,051) such that those…

What's All the Noise? Differentiating Dimensions of Acoustic Stress and the Limits to Meta-Analysis: Reply to Smith (2012)

ERIC Educational Resources Information Center

Szalma, J. L.; Hancock, P. A.

2012-01-01

Smith (2012) has provided pertinent observations on our recently published meta-analytic review (Szalma & Hancock, 2011) of the effects of acoustic noise on performance. His main points are as follows: (a) our review excluded some areas of research; (b) there were conceptual problems with our moderator analyses; and (c) limitations to…

Prosocial Involvement and Antisocial Peer Affiliations as Predictors of Behavior Problems in Urban Adolescents: Main Effects and Moderating Effects

ERIC Educational Resources Information Center

Kaufmann, Dagmar R.; Wyman, Peter A.; Forbes-Jones, Emma L.; Barry, Jason

2007-01-01

This study examined the relationships between prosocial involvement (PI), antisocial peer affiliations (APA), and the degree of their overlapping or independent prediction of behavior problems in urban adolescents. Two dimensions of behavior were assessed at ages 9-11 and at ages 13-15: disruptive, aggressive conduct and number of delinquent…

Unique Roles of Mothering and Fathering in Child Anxiety; Moderation by Child's Age and Gender

ERIC Educational Resources Information Center

Verhoeven, Marjolein; Bogels, Susan M.; van der Bruggen, Corine C.

2012-01-01

We examined the associations between the parenting dimensions autonomy granting, over control, and rejection and children's anxiety, in relation to parent and child gender and child age. Elementary school-aged children (n = 179, M[subscript age] = 10.27, SD = 1.30), adolescents (n = 127, M[subscript age] = 15.02, SD = 1.54) and both their parents…

Implications of Studies on Self-Esteem for Educational Research and Practice.

ERIC Educational Resources Information Center

Coopersmith, Stanley

The research of this author indicates that the development of high self-esteem (defined as the good-bad dimension of self-concept) is associated with (1) acceptance, (2) clearly defined limits and moderately high goals, and (3) respectful treatment. Such factors as status, income, and education are only related to high self-esteem if they are a…

Self-Esteem and Children's Reactions to Youth Sport Coaching Behaviors: A Field Study of Self-Enhancement Processes.

ERIC Educational Resources Information Center

Smith, Ronald E.; Smoll, Frank L.

1990-01-01

Studied the attraction responses of child athletes to coaches who differed in their behavior patterns during the season. Children with low self-esteem responded positively to coaches with high self-esteem and negatively to coaches with low self-esteem on the instructiveness and supportiveness dimensions. Moderate- and high-self-esteem children…

Anxiousness, Frustration, and Effortful Control as Moderators of the Relation between Parenting and Adjustment in Middle-Childhood

ERIC Educational Resources Information Center

Lengua, Liliana J.

2008-01-01

Interactions among multiple dimensions of child temperament and parenting were tested as predictors of change in child adjustment problems using a community sample (N = 188) of children (8-12 years). Significant interactions suggested that the effect of parenting on changes in problems were dependent upon temperament and, in some cases, child sex.…

Hong Kong secondary school students' attitudes towards science: a study of structural models and gender differences

NASA Astrophysics Data System (ADS)

Wan, Zhi Hong; Lee, John Chi Kin

2017-03-01

This study explored two under-researched areas on students' attitudes towards science, that is, the structural models representing these attitudes and the role played by school bands in moderating the gender differences in such attitudes. The participants were 360 ninth graders in Hong Kong from 3 school bands. The structural equation modelling method was adopted to compare four hypothetical models for students' attitudes towards science. Results reflect that (i) the data supported the three-factor structure of the behavioural domain of students' attitudes towards science; (ii) the four lower level dimensions of the attitudes towards science (i.e. value of science to society, self-concept in science, anxiety towards science and enjoyment of science) could be further integrated into broader categories; (iii) male students demonstrated significantly more positive attitudes towards science in five dimensions (i.e. self-concept in science, enjoyment in science, learning science in and outside the classroom and future participation) and (iv) school bands played a prominent moderating role in gender differences in students' attitudes towards science. Implications for studying and developing students' attitudes towards science are discussed in the paper.

Home environmental consequences of commute travel impedance.

PubMed

Novaco, R W; Kliewer, W; Broquet, A

1991-12-01

The physical and perceptual dimensions of commuting travel impedance were again found to have stressful consequences in a study of 99 employees of two companies. This quasi-experimental replication study, which focuses here on home environment consequences, investigated the effects of physical impedance and subjective impedance on multivariate measures of residential satisfaction and personal affect in the home. Both sets of residential outcome measures were significantly related to the two impedance dimensions. As predicted, gender was a significant moderator of physical impedance effects. Women commuting on high physical impedance routes were most negatively affected. Previously found subjective impedance effects on negative home mood, regardless of gender, were strongly replicated with several methods and were buttressed by convergent results with objective indices. The theoretical conjecture that subjective impedance mediates the stress effects of physical impedance was supported by the personal affect cluster but only for one variable in the residential satisfaction cluster. Traffic congestion has increased in metropolitan areas nationwide, and commuters, families, and organizations are absorbing associated hidden costs. The results are reviewed in terms of our ecological model, and the moderating effects of gender are discussed in terms of choice and role constraints.

A porous Cd(II) metal-organic framework with high adsorption selectivity for CO2 over CH4

NASA Astrophysics Data System (ADS)

Zhu, Chunlan

2017-05-01

Metal-organic frameworks (MOFs) have attracted a lot of attention in recent decades. We applied a semi-rigid four-carboxylic acid linker to assemble with Cd(II) ions to generate a novel microporous Cd(II) MOF material. Single crystal X-ray diffraction study reveals the different two dimension (2D) layers can be further packed together with an AB fashion by hydrogen bonds (O4sbnd H4⋯O7 = 1.863 Å) to construct a three dimension (3D) supermolecular architecture. The resulting sample can be synthesized under solvothermal reactions successfully, which exhibits high selectivity adsorption of CO2 over CH4 at room temperature. In addition, the obtained sample was characterized by thermal gravimetric analyses (TGA), Fourier-transform infrared spectra (FT-IR), elemental analysis (CHN) and powder X-ray diffraction (PXRD).

C1orf163/RESA1 is a novel mitochondrial intermembrane space protein connected to respiratory chain assembly.

PubMed

Kozjak-Pavlovic, Vera; Prell, Florian; Thiede, Bernd; Götz, Monika; Wosiek, Dominik; Ott, Christine; Rudel, Thomas

2014-02-20

Oxidative phosphorylation (OXPHOS) in mitochondria takes place at the inner membrane, which folds into numerous cristae. The stability of cristae depends, among other things, on the mitochondrial intermembrane space bridging complex. Its components include inner mitochondrial membrane protein mitofilin and outer membrane protein Sam50. We identified a conserved, uncharacterized protein, C1orf163 [SEL1 repeat containing 1 protein (SELRC1)], as one of the proteins significantly reduced after the knockdown of Sam50 and mitofilin. We show that C1orf163 is a mitochondrial soluble intermembrane space protein. Sam50 depletion affects moderately the import and assembly of C1orf163 into two protein complexes of approximately 60kDa and 150kDa. We observe that the knockdown of C1orf163 leads to reduction of levels of proteins belonging to the OXPHOS complexes. The activity of complexes I and IV is reduced in C1orf163-depleted cells, and we observe the strongest defects in the assembly of complex IV. Therefore, we propose C1orf163 to be a novel factor important for the assembly of respiratory chain complexes in human mitochondria and suggest to name it RESA1 (for RESpiratory chain Assembly 1). Copyright © 2013 Elsevier Ltd. All rights reserved.

When lithography meets self-assembly: a review of recent advances in the directed assembly of complex metal nanostructures on planar and textured surfaces

NASA Astrophysics Data System (ADS)

Hughes, Robert A.; Menumerov, Eredzhep; Neretina, Svetlana

2017-07-01

One of the foremost challenges in nanofabrication is the establishment of a processing science that integrates wafer-based materials, techniques, and devices with the extraordinary physicochemical properties accessible when materials are reduced to nanoscale dimensions. Such a merger would allow for exacting controls on nanostructure positioning, promote cooperative phenomenon between adjacent nanostructures and/or substrate materials, and allow for electrical contact to individual or groups of nanostructures. With neither self-assembly nor top-down lithographic processes being able to adequately meet this challenge, advancements have often relied on a hybrid strategy that utilizes lithographically-defined features to direct the assembly of nanostructures into organized patterns. While these so-called directed assembly techniques have proven viable, much of this effort has focused on the assembly of periodic arrays of spherical or near-spherical nanostructures comprised of a single element. Work directed toward the fabrication of more complex nanostructures, while still at a nascent stage, has nevertheless demonstrated the possibility of forming arrays of nanocubes, nanorods, nanoprisms, nanoshells, nanocages, nanoframes, core-shell structures, Janus structures, and various alloys on the substrate surface. In this topical review, we describe the progress made in the directed assembly of periodic arrays of these complex metal nanostructures on planar and textured substrates. The review is divided into three broad strategies reliant on: (i) the deterministic positioning of colloidal structures, (ii) the reorganization of deposited metal films at elevated temperatures, and (iii) liquid-phase chemistry practiced directly on the substrate surface. These strategies collectively utilize a broad range of techniques including capillary assembly, microcontact printing, chemical surface modulation, templated dewetting, nanoimprint lithography, and dip-pen nanolithography and employ a wide scope of chemical processes including redox reactions, alloying, dealloying, phase separation, galvanic replacement, preferential etching, template-mediated reactions, and facet-selective capping agents. Taken together, they highlight the diverse toolset available when fabricating organized surfaces of substrate-supported nanostructures.

Structural dissection of Ebola virus and its assembly determinants using cryo-electron tomography.

PubMed

Bharat, Tanmay A M; Noda, Takeshi; Riches, James D; Kraehling, Verena; Kolesnikova, Larissa; Becker, Stephan; Kawaoka, Yoshihiro; Briggs, John A G

2012-03-13

Ebola virus is a highly pathogenic filovirus causing severe hemorrhagic fever with high mortality rates. It assembles heterogenous, filamentous, enveloped virus particles containing a negative-sense, single-stranded RNA genome packaged within a helical nucleocapsid (NC). We have used cryo-electron microscopy and tomography to visualize Ebola virus particles, as well as Ebola virus-like particles, in three dimensions in a near-native state. The NC within the virion forms a left-handed helix with an inner nucleoprotein layer decorated with protruding arms composed of VP24 and VP35. A comparison with the closely related Marburg virus shows that the N-terminal region of nucleoprotein defines the inner diameter of the Ebola virus NC, whereas the RNA genome defines its length. Binding of the nucleoprotein to RNA can assemble a loosely coiled NC-like structure; the loose coil can be condensed by binding of the viral matrix protein VP40 to the C terminus of the nucleoprotein, and rigidified by binding of VP24 and VP35 to alternate copies of the nucleoprotein. Four proteins (NP, VP24, VP35, and VP40) are necessary and sufficient to mediate assembly of an NC with structure, symmetry, variability, and flexibility indistinguishable from that in Ebola virus particles released from infected cells. Together these data provide a structural and architectural description of Ebola virus and define the roles of viral proteins in its structure and assembly.

Physico-Pathologic Mechanisms Involved in Neurodegeneration: Misfolded Protein-Plasma Membrane Interactions.

PubMed

Shrivastava, Amulya Nidhi; Aperia, Anita; Melki, Ronald; Triller, Antoine

2017-07-05

Several neurodegenerative disorders, such as Alzheimer's and Parkinson's disease, are characterized by prominent loss of synapses and neurons associated with the presence of abnormally structured or misfolded protein assemblies. Cell-to-cell transfer of misfolded proteins has been proposed for the intra-cerebral propagation of these diseases. When released, misfolded proteins diffuse in the 3D extracellular space before binding to the plasma membrane of neighboring cells, where they diffuse on a 2D plane. This reduction in diffusion dimension and the cell surface molecular crowding promote deleterious interactions with native membrane proteins, favoring clustering and further aggregation of misfolded protein assemblies. These processes open up new avenues for therapeutics development targeting the initial interactions of deleterious proteins with the plasma membrane or the subsequent pathological signaling. Copyright © 2017 Elsevier Inc. All rights reserved.