Science.gov

Sample records for monitoring quality assurance

  1. Quality assurance and quality control in monitoring programs

    USGS Publications Warehouse

    Shampine, W.J.

    1993-01-01

    There are three general characteristics of the data to be collected in a monitoring program that should be met in order to maximize the use and value of the data: the data quality should be known the data type and quality should be consistent and comparable, and the data should be available and accessible. Potential problems with each of these characteristics are addressed effectively by quality assurance and quality control. One of the most important aspects of quality assurance in a monitoring program is the development of a quality assurance plan, which should identify clearly the quality of the data needed and describe in detail the planned actions to provide confidence that the program will meet its stated objectives. Quality control data, which allow for the quality and suitability of the environmental data to be evaluated and ascertained, should be collected and utilized as an integral part of the QA effort associated with a monitoring program.

  2. Quality Assurance and School Monitoring in Hong Kong

    ERIC Educational Resources Information Center

    Mok, Magdalena Mo Ching

    2007-01-01

    This study reports on the Hong Kong education quality assurance and school monitoring system. Three research questions were addressed: (1) Who controls the quality of school education in Hong Kong? (2) What strategies are used in the Hong Kong school education quality assurance process? (3) Agenda for Future Research on quality assurance and…

  3. Operational Environmental Monitoring Program Quality Assurance Project Plan

    SciTech Connect

    Perkins, C.J.

    1994-08-01

    This Quality Assurance Project Plan addresses the quality assurance requirements for the activities associated with the preoperational and operational environmental monitoring performed by Westinghouse Hanford Company as it implements the Operational Environmental Monitoring program. This plan applies to all sampling and monitoring activities performed by Westinghouse Hanford Company in implementing the Operational Environmental Monitoring program at the Hanford Site.

  4. Quality Assurance Project Plan for Facility Effluent Monitoring Plan activities

    SciTech Connect

    Frazier, T.P.

    1994-10-20

    This Quality Assurance Project Plan addresses the quality assurance requirements for the activities associated with the Facility Effluent Monitoring Plans, which are part of the overall Hanford Site Environmental Protection Plan. This plan specifically applies to the sampling and analysis activities and continuous monitoring performed for all Facility Effluent Monitoring Plan activities conducted by Westinghouse Hanford Company. It is generic in approach and will be implemented in conjunction with the specific requirements of the individual Facility Effluent Monitoring Plans.

  5. Monitoring and Assuring the Quality of Digital Aerial Data

    NASA Technical Reports Server (NTRS)

    Christopherson, Jon

    2007-01-01

    This viewgraph presentation explains the USGS plan for monitoring and assuring the quality of digital aerial data. The contents include: 1) History of USGS Aerial Imaging Involvement; 2) USGS Research and Results; 3) Outline of USGS Quality Assurance Plan; 4) Other areas of Interest; and 5) Summary

  6. Quality Assurance Program Plan for radionuclide airborne emissions monitoring

    SciTech Connect

    Vance, L.M.

    1993-07-01

    This Quality Assurance Program Plan (QAPP) describes the quality assurance requirements and responsibilities for radioactive airborne emissions measurements activities from regulated stacks are controlled at the Hanford Site. Detailed monitoring requirements apply to stacks exceeding 1% of the standard of 10 mrem annual effective dose equivalent to the maximally exposed individual from operations of the Hanford Site.

  7. Near-facility environmental monitoring quality assurance project plan

    SciTech Connect

    McKinney, S.M.

    1997-11-24

    This Quality Assurance Project Plan addresses the quality assurance requirements for the activities associated with the preoperational and near facility environmental monitoring performed by Waste Management Federal Services, Inc., Northwest Operations and supersedes WHC-EP-0538-2. This plan applies to all sampling and monitoring activities performed by waste management Federal Services, Inc., Northwest Operations in implementing facility environmental monitoring at the Hanford Site.

  8. Quality assurance

    SciTech Connect

    Gillespie, B.M.; Gleckler, B.P.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the quality assurance and quality control practices of Hanford Site environmental monitoring and surveillance programs. Samples are analyzed according to documented standard analytical procedures. This section discusses specific measures taken to ensure quality in project management, sample collection, and analytical results.

  9. Near Facility Environmental Monitoring Quality Assurance Project Plan

    SciTech Connect

    MCKINNEY, S.M.

    2000-05-01

    This Quality Assurance Project Plan addresses the quality assurance requirements for the activities associated with the preoperational and near-facility environmental monitoring directed by Waste Management Technical Services and supersedes HNF-EP-0538-4. This plan applies to all sampling and monitoring activities performed by Waste Management Technical Services in implementing near-facility environmental monitoring at the Hanford Site. This Quality Assurance Project Plan is required by U.S. Department of Energy Order 5400.1 (DOE 1990) as a part of the Environmental Monitoring Plan (DOE-RL 1997) and is used to define: Environmental measurement and sampling locations used to monitor environmental contaminants near active and inactive facilities and waste storage and disposal sites; Procedures and equipment needed to perform the measurement and sampling; Frequency and analyses required for each measurement and sampling location; Minimum detection level and accuracy; Quality assurance components; and Investigation levels. Near-facility environmental monitoring for the Hanford Site is conducted in accordance with the requirements of U.S. Department of Energy Orders 5400.1 (DOE 1990), 5400.5 (DOE 1993), 5484.1 (DOE 1990), and 435.1 (DOE 1999), and DOE/EH-O173T (DOE 1991). It is Waste Management Technical Services' objective to manage and conduct near-facility environmental monitoring activities at the Hanford Site in a cost-effective and environmentally responsible manner that is in compliance with the letter and spirit of these regulations and other environmental regulations, statutes, and standards.

  10. Quality Assurance Project Plan for Facility Effluent Monitoring Plan activities

    SciTech Connect

    Nickels, J.M.

    1991-06-01

    This Quality Assurance Project Plan addresses the quality assurance requirements for the Facility Monitoring Plans of the overall site-wide environmental monitoring plan. This plan specifically applies to the sampling and analysis activities and continuous monitoring performed for all Facility Effluent Monitoring Plan activities conducted by Westinghouse Hanford Company. It is generic in approach and will be implemented in conjunction with the specific requirements of individual Facility Effluent Monitoring Plans. This document is intended to be a basic road map to the Facility Effluent Monitoring Plan documents (i.e., the guidance document for preparing Facility Effluent Monitoring Plans, Facility Effluent Monitoring Plan determinations, management plan, and Facility Effluent Monitoring Plans). The implementing procedures, plans, and instructions are appropriate for the control of effluent monitoring plans requiring compliance with US Department of Energy, US Environmental Protection Agency, state, and local requirements. This Quality Assurance Project Plan contains a matrix of organizational responsibilities, procedural resources from facility or site manuals used in the Facility Effluent Monitoring Plans, and a list of the analytes of interest and analytical methods for each facility preparing a Facility Effluent Monitoring Plan. 44 refs., 1 figs., 2 tabs.

  11. Quality assurance program plan for radionuclide airborne emissions monitoring

    SciTech Connect

    Boom, R.J.

    1995-12-01

    This Quality Assurance Program Plan identifies quality assurance program requirements and addresses the various Westinghouse Hanford Company organizations and their particular responsibilities in regards to sample and data handling of radiological airborne emissions. This Quality Assurance Program Plan is prepared in accordance with and to written requirements.

  12. MoniQA: a general approach to monitor quality assurance

    NASA Astrophysics Data System (ADS)

    Jacobs, J.; Deprez, T.; Marchal, G.; Bosmans, H.

    2006-03-01

    MoniQA ("Monitor Quality Assurance") is a new, non-commercial, independent quality assurance software application developed in our medical physics team. It is a complete Java TM - based modular environment for the evaluation of radiological viewing devices and it thus fits in the global quality assurance network of our (film less) radiology department. The purpose of the software tool is to guide the medical physicist through an acceptance protocol and the radiologist through a constancy check protocol by presentation of the necessary test patterns and by automated data collection. Data are then sent to a central management system for further analysis. At the moment more than 55 patterns have been implemented, which can be grouped in schemes to implement protocols (i.e. AAPMtg18, DIN and EUREF). Some test patterns are dynamically created and 'drawn' on the viewing device with random parameters as is the case in a recently proposed new pattern for constancy testing. The software is installed on 35 diagnostic stations (70 monitors) in a film less radiology department. Learning time was very limited. A constancy check -with the new pattern that assesses luminance decrease, resolution problems and geometric distortion- takes only 2 minutes and 28 seconds per monitor. The modular approach of the software allows the evaluation of new or emerging test patterns. We will report on the software and its usability: practicality of the constancy check tests in our hospital and on the results from acceptance tests of viewing stations for digital mammography.

  13. Quality Assurance and Control Considerations in Environmental Measurements and Monitoring

    NASA Astrophysics Data System (ADS)

    Sedlet, Jacob

    1982-06-01

    Quality assurance and quality control have become accepted as essential parts of all environmental surveillance, measurements, and monitoring programs, both nuclear and non-nuclear. The same principles and details apply to each. It is primarily the final measurement technique that differs. As the desire and need to measure smaller amounts of pollutants with greater accuracy has increased, it has been recognized that quality assurance and control programs are cost-effective in achieving the expected results. Quality assurance (QA) consists of all the actions necessary to provide confidence in the results. Quality control (QC) is a part of QA, and consists of those actions and activities that permit the control of the individual steps in the environmental program. The distinction between the two terms is not always clearly defined, but a sharp division is not necessary. The essential principle of QA and QC is a commitment to high quality results. The essential components of a QA and QC program are a complete, written procedures manual for all parts of the environmental program, the use of standard or validated procedures, participation in applicable interlaboratory comparison or QA programs, replicate analysis and measurement, training of personnel, and a means of auditing or checking that the QA and QC programs are properly conducted. These components are discussed below in some detail.

  14. Assuring quality.

    PubMed

    Eaton, K A; Reynolds, P A; Mason, R; Cardell, R

    2008-08-09

    All those involved in education have a strong motivation to ensure that all its aspects, including content and teaching practice, are of the highest standard. This paper describes how agencies such as the Quality Assurance Agency for Higher Education (QAA) and the General Dental Council (GDC) have established frameworks and specifications to monitor the quality of education provided in dental schools and other institutes that provide education and training for dentists and dental care professionals (DCPs). It then considers quality issues in programme and course development, techniques for assessing the quality of education, including content and presentation, and the role of students. It goes on to review the work that has been done in developing quality assessment for distance learning in dentistry. It concludes that, to date, much of the work on quality applies to education as a whole and that the assessment of the quality of e-learning in dentistry is in its infancy.

  15. Challenges in Data Quality Assurance in Pervasive Health Monitoring Systems

    NASA Astrophysics Data System (ADS)

    Sriram, Janani; Shin, Minho; Kotz, David; Rajan, Anand; Sastry, Manoj; Yarvis, Mark

    Wearable, portable, and implantable medical sensors have ushered in a new paradigm for healthcare in which patients can take greater responsibility and caregivers can make well-informed, timely decisions. Health-monitoring systems built on such sensors have huge potential benefit to the quality of healthcare and quality of life for many people, such as patients with chronic medical conditions (such as blood-sugar sensors for diabetics), people seeking to change unhealthy behavior (such as losing weight or quitting smoking), or athletes wishing to monitor their condition and performance. To be effective, however, these systems must provide assurances about the quality of the sensor data. The sensors must be applied to the patient by a human, and the sensor data may be transported across multiple networks and devices before it is presented to the medical team. While no system can guarantee data quality, we anticipate that it will help for the system to annotate data with some measure of confidence. In this paper, we take a deeper look at potential health-monitoring usage scenarios and highlight research challenges required to ensure and assess quality of sensor data in health-monitoring systems.

  16. Quality assurance program plan for radionuclide airborne emissions monitoring

    SciTech Connect

    Boom, R.J.

    1995-03-01

    This Quality Assurance Program Plan identifies quality assurance program requirements and addresses the various Westinghouse Hanford Company organizations and their particular responsibilities in regards to sample and data handling of airborne emissions. The Hanford Site radioactive airborne emissions requirements are defined in National Emissions Standards for Hazardous Air Pollutants (NESHAP), Code of Federal Regulations, Title 40, Part 61, Subpart H (EPA 1991a). Reporting of the emissions to the US Department of Energy is performed in compliance with requirements of US Department of Energy, Richland Operations Office Order 5400.1, General Environmental Protection Program (DOE-RL 1988). This Quality Assurance Program Plan is prepared in accordance with and to the requirements of QAMS-004/80, Guidelines and Specifications for Preparing Quality Assurance Program Plans (EPA 1983). Title 40 CFR Part 61, Appendix B, Method 114, Quality Assurance Methods (EPA 1991b) specifies the quality assurance requirements and that a program plan should be prepared to meet the requirements of this regulation. This Quality Assurance Program Plan identifies NESHAP responsibilities and how the Westinghouse Hanford Company Environmental, Safety, Health, and Quality Assurance Division will verify that the methods are properly implemented.

  17. Procedure 5 - Quality Assurance Requirements For Vapor Phase Mercury Continuous Emissions Monitoring Systems And Sorbent Trap Monitoring Systems Used For Compliance Determination At Stationary Sources

    EPA Pesticide Factsheets

    Promulgated quality assurance procedure 5 Quality Assurance Requirements For Vapor Phase Mercury Continuous Emissions Monitoring Systems And Sorbent Trap Monitoring Systems Used For Compliance Determination At Stationary Sources

  18. Procedure 5 Quality Assurance Requirements For Vapor Phase Mercury Continuous Emissions Monitoring Systems And Sorbent Trap Monitoring Systems Used For Compliance Determination At Stationary Sources

    EPA Pesticide Factsheets

    Promulgated quality assurance Procedure 5 Quality Assurance Requirements For Vapor Phase Mercury Continuous Emissions Monitoring Systems And Sorbent Trap Monitoring Systems Used For Compliance Determination At Stationary Sources

  19. Analytical approaches to quality assurance and quality control in rangeland monitoring data

    USDA-ARS?s Scientific Manuscript database

    Producing quality data to support land management decisions is the goal of every rangeland monitoring program. However, the results of quality assurance (QA) and quality control (QC) efforts to improve data quality are rarely reported. The purpose of QA and QC is to prevent and describe non-sampling...

  20. Quality Assurance.

    ERIC Educational Resources Information Center

    Massachusetts Career Development Inst., Springfield.

    This booklet is one of six texts from a workplace literacy curriculum designed to assist learners in facing the increased demands of the workplace. The booklet contains five sections that cover the following topics: (1) importance of reliability; (2) meaning of quality assurance; (3) historical development of quality assurance; (4) statistical…

  1. Aspects of monitoring and quality assurance for radiolabeled antibodies

    SciTech Connect

    Barber, D.E. . School of Public Health)

    1992-06-01

    This report provides an informational resource and guide for the US Nuclear Regulatory Commission (NRC) and NRC licensees who produce or use radiolabeled antibodies (RABs). Components of quality assurance programs related to the production and use of RABs are reviewed and evaluated, and recommendations are made on dosage calibrations, exposure control, monitoring, and personnel requirements. Special emphasis is placed on dose calibrators because these instruments are used extensively to measure the dosage of radiopharmaceuticals to be administered to patients. The difficulties of using dose calibrators to quantify dosages of beta- and alpha-emitters are discussed. The advantages and disadvantages of using other instruments are examined, and recommendations are made on the types of instruments to be used for different applications. 46 refs., 8 tabs.

  2. 77 FR 8209 - Quality Assurance Requirements for Continuous Opacity Monitoring Systems at Stationary Sources

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-14

    .... SUMMARY: The EPA is proposing to establish quality assurance and quality control (QA/QC) procedures for... AGENCY 40 CFR Part 60 RIN 2060-AH23 Quality Assurance Requirements for Continuous Opacity Monitoring... Register. FOR FURTHER INFORMATION CONTACT: Ms. Lula H. Melton, U.S. EPA, Office of Air Quality Planning...

  3. 77 FR 18709 - Quality Assurance Requirements for Continuous Opacity Monitoring Systems at Stationary Sources

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-28

    ...: Ms. Lula H. Melton, U.S. EPA, Office of Air Quality Planning and Standards, Air Quality Assessment... AGENCY 40 CFR Part 60 RIN 2060-AH23 Quality Assurance Requirements for Continuous Opacity Monitoring... final rule. SUMMARY: The EPA published a direct final rule titled ``Quality Assurance Requirements for...

  4. U.S. Geological Survey quality-assurance plan for continuous water-quality monitoring in Kansas, 2014

    USGS Publications Warehouse

    Bennett, Trudy J.; Graham, Jennifer L.; Foster, Guy M.; Stone, Mandy L.; Juracek, Kyle E.; Rasmussen, Teresa J.; Putnam, James E.

    2014-01-01

    A quality-assurance plan for use in conducting continuous water-quality monitoring activities has been developed for the Kansas Water Science Center in accordance with guidelines set forth by the U.S. Geological Survey. This quality-assurance plan documents the standards, policies, and procedures used by the U.S. Geological Survey in Kansas for activities related to the collection, processing, storage, analysis, and release of continuous water-quality monitoring data. The policies and procedures that are documented in this quality-assurance plan for continuous water-quality monitoring activities complement quality-assurance plans for surface-water and groundwater activities in Kansas.

  5. 40 CFR Appendix A to Part 58 - Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... templates or validation criteria already approved in Quality Assurance Project Plans (QAPPs) should be used... organizations must develop quality assurance project plans (QAPP) which describe how the organization intends to... activities. 2.1Quality Management Plans and Quality Assurance Project Plans. All monitoring organizations...

  6. [Quality assurance in inpatient treatment of depression. Aspects of quality monitoring and external quality assurance exemplified by a pilot project of inpatient treatment of depression].

    PubMed

    Wolfersdorf, M; Stieglitz, R D; Metzger, R; Ruppe, A; Stabenow, S; Hornstein, C; Keller, F; Schell, G; Berger, M

    1997-05-01

    Aspects of a Pilot Study on Depression Treatment According to Quality Monitoring and External Quality Assurance: Experiences and results of a pilot study on quality of the treatment of depressed inpatients in 4 different psychiatric hospitals (2 state mental hospitals, 1 university clinic, 1 psychiatric clinic at a city general hospital) according to so-called process and outcome quality, are reported. Outcome data (self-ratings, observer rating, clinical global impression admission versus discharge, patient satisfaction with treatment, duration of inpatient stay/and patient data are reported while comparing the 4 hospitals. Difficulties and problems of data collection, assessments and comparison of 4 different hospitals are discussed.

  7. 77 FR 13977 - Quality Assurance Requirements for Continuous Opacity Monitoring Systems at Stationary Sources

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-08

    ... final rule titled, ``Quality Assurance Requirements for Continuous Opacity Monitoring Systems at Stationary Sources,'' that were published in the Federal Register on February 14, 2012. The 30-day comment... Systems at Stationary Sources AGENCY: Environmental Protection Agency (EPA). ACTION: Direct final...

  8. Quality assurance project plan for ground water monitoring activities managed by Westinghouse Hanford Company. Revision 3

    SciTech Connect

    Stauffer, M.

    1995-11-01

    This quality assurance project plan (QAPP) applies specifically to the field activities and laboratory analysis performed for all RCRA groundwater projects conducted by Hanford Technical Services. This QAPP is generic in approach and shall be implemented in conjunction with the specific requirements of individual groundwater monitoring plans.

  9. Compliance Assurance Monitoring

    EPA Pesticide Factsheets

    Compliance assurance monitoring is intended to provide a reasonable assurance of compliance with applicable requirements under the Clean Air Act for large emission units that rely on pollution control device equipment to achieve compliance.

  10. Leveraging network connectivity for quality assurance of clinical display monitors.

    PubMed

    Gersten, Jennifer

    2012-01-01

    The VA Midwest Health Care Network, VISN 23, is one of 21 veteran integrated health service networks (VISN) under the Department of Veterans Affairs. There are approximately 300,000 imaging studies generated per year and currently more than 14,000 picture archiving and communication system (PACS) users in VISN 23. Biomedical Engineering Services within VISN 23 coordinates the provision of medical technology support. One emerging technology leverages network connectivity as a method of calibrating and continuously monitoring clinical display monitors in support of PACS. Utilizing a continuous calibration monitoring system, clinical displays can be identified as out of Digital Imaging and Communications in Medicine (DICOM) compliance through a centralized server. The technical group can receive immediate notification via e-mail and respond proactively. Previously, this problem could go unnoticed until the next scheduled preventive maintenance was performed. This system utilizes simple network management protocols (SNMP) and simple mail transfer protocols (SMTP) across a wide area network for real-time alerts from a centralized location. This central server supports and monitors approximately 320 clinical displays deployed across five states. Over the past three years of implementation in VISN 23, the remote calibration and monitoring capability has allowed for more efficient support of clinical displays and has enhanced patient safety by ensuring a consistent display of images on these clinical displays.

  11. 40 CFR Appendix A to Part 58 - Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 6 2013-07-01 2013-07-01 false Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring A Appendix A to Part 58 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) AMBIENT AIR QUALITY SURVEILLANCE Pt. 58, App. A Appendix A to Part 58—Quality Assurance Requirement...

  12. Quality assurance plan for the Basic Environmental Compliance and Monitoring Program (BECAMP). Revision 1

    SciTech Connect

    Essington, E.H.

    1993-11-01

    This quality assurance plan (QAP) is designed ensure that the methodologies and the data used for environmental cleanup and treatment studies at the Nevada Test Site are both usable and defensible. The QAP serves two purposes in this regard: (1) to guide the preparation of procedures for carrying out the tasks of the Basic Environmental compliance and Monitoring program (BECAMP); and (2) to help management track the progress of those tasks.

  13. EMC Compliance Assurance Monitoring

    EPA Pesticide Factsheets

    The Compliance Assurance Monitoring, or CAM, rule is designed to satisfy the requirements for monitoring and compliance certification in the Part 70 operating permits program and Title VII of the 1990 Clean Air Act Amendments

  14. Quality Assurance Project Plan

    SciTech Connect

    Holland, R. C.

    1998-06-01

    This Quality Assurance Project Plan documents the quality assurance activities for the Wastewater/Stormwater/Groundwater and Environmental Surveillance Programs. This QAPP was prepared in accordance with DOE guidance on compliance with 10CFR830.120.

  15. Rationale for Quality Assurance in Fecal Egg Monitoring of Soil-Transmitted Helminthiasis.

    PubMed

    Hoekendijk, David J L; Hill, Philip C; Sowerby, Stephen J

    2016-09-07

    Substantial investment has been made into the once "neglected" tropical disease, soil-transmitted helminthiasis, and into control programs that operate within a framework of mapping baseline disease distribution, measuring the effectiveness of applied interventions, establishing when to cease drug administration, and for posttreatment evaluations. However, critical to each of these stages is the determination of helminth infection. The limitations of traditional microscope-based fecal egg diagnostics have not provided quality assurance in the monitoring of parasite disease and suboptimal treatment regimes provide for the potential development of parasite resistance to anthelmintic drugs. Improved diagnostic and surveillance tools are required to protect therapeutic effectiveness and to maintain funder confidence. Such tools may be on the horizon with emergent technologies that offer potential for enhanced visualization and quality-assured quantitation of helminth eggs. © The American Society of Tropical Medicine and Hygiene.

  16. Multinational Quality Assurance

    ERIC Educational Resources Information Center

    Kinser, Kevin

    2011-01-01

    Multinational colleges and universities pose numerous challenges to the traditional models of quality assurance that are designed to validate domestic higher education. When institutions cross international borders, at least two quality assurance protocols are involved. To guard against fraud and abuse, quality assurance in the host country is…

  17. Lot quality assurance sampling to monitor supplemental immunization activity quality: an essential tool for improving performance in polio endemic countries.

    PubMed

    Brown, Alexandra E; Okayasu, Hiromasa; Nzioki, Michael M; Wadood, Mufti Z; Chabot-Couture, Guillaume; Quddus, Arshad; Walker, George; Sutter, Roland W

    2014-11-01

    Monitoring the quality of supplementary immunization activities (SIAs) is a key tool for polio eradication. Regular monitoring data, however, are often unreliable, showing high coverage levels in virtually all areas, including those with ongoing virus circulation. To address this challenge, lot quality assurance sampling (LQAS) was introduced in 2009 as an additional tool to monitor SIA quality. Now used in 8 countries, LQAS provides a number of programmatic benefits: identifying areas of weak coverage quality with statistical reliability, differentiating areas of varying coverage with greater precision, and allowing for trend analysis of campaign quality. LQAS also accommodates changes to survey format, interpretation thresholds, evaluations of sample size, and data collection through mobile phones to improve timeliness of reporting and allow for visualization of campaign quality. LQAS becomes increasingly important to address remaining gaps in SIA quality and help focus resources on high-risk areas to prevent the continued transmission of wild poliovirus.

  18. DICOM index tracker enterprise: advanced system for enterprise-wide quality assurance and patient safety monitoring

    NASA Astrophysics Data System (ADS)

    Zhang, Min; Pavlicek, William; Panda, Anshuman; Langer, Steve G.; Morin, Richard; Fetterly, Kenneth A.; Paden, Robert; Hanson, James; Wu, Lin-Wei; Wu, Teresa

    2015-03-01

    DICOM Index Tracker (DIT) is an integrated platform to harvest rich information available from Digital Imaging and Communications in Medicine (DICOM) to improve quality assurance in radiology practices. It is designed to capture and maintain longitudinal patient-specific exam indices of interests for all diagnostic and procedural uses of imaging modalities. Thus, it effectively serves as a quality assurance and patient safety monitoring tool. The foundation of DIT is an intelligent database system which stores the information accepted and parsed via a DICOM receiver and parser. The database system enables the basic dosimetry analysis. The success of DIT implementation at Mayo Clinic Arizona calls for the DIT deployment at the enterprise level which requires significant improvements. First, for geographically distributed multi-site implementation, the first bottleneck is the communication (network) delay; the second is the scalability of the DICOM parser to handle the large volume of exams from different sites. To address this issue, DICOM receiver and parser are separated and decentralized by site. To facilitate the enterprise wide Quality Assurance (QA), a notable challenge is the great diversities of manufacturers, modalities and software versions, as the solution DIT Enterprise provides the standardization tool for device naming, protocol naming, physician naming across sites. Thirdly, advanced analytic engines are implemented online which support the proactive QA in DIT Enterprise.

  19. College Quality Assurance Assurances. Mendip Papers 020.

    ERIC Educational Resources Information Center

    Sallis, E.; Hingley, P.

    This paper discusses the increasing interest in quality assurance in British education including its measurement and management through the introduction of a quality assurance system. The reasons and benefits of beginning a quality assurance system are discussed, and questions of what constitutes quality, whether it is quality in fact…

  20. The meteorological monitoring audit, preventative maintenance and quality assurance programs at a former nuclear weapons facility

    SciTech Connect

    Maxwell, D.R.

    1995-12-31

    The purposes of the meteorological monitoring audit, preventative maintenance, and quality assurance programs at the Rocky Flats Environmental Technology Site (Site), are to (1) support Emergency Preparedness (EP) programs at the Site in assessing the transport, dispersion, and deposition of effluents actually or potentially released into the atmosphere by Site operations; and (2) provide information for onsite and offsite projects concerned with the design of environmental monitoring networks for impact assessments, environmental surveillance activities, and remediation activities. The risk from the Site includes chemical and radioactive emissions historically related to nuclear weapons component production activities that are currently associated with storage of large quantities of radionuclides (plutonium) and radioactive waste forms. The meteorological monitoring program provides information for site-specific weather forecasting, which supports Site operations, employee safety, and Emergency Preparedness operations.

  1. RAVEN Quality Assurance Activities

    SciTech Connect

    Cogliati, Joshua Joseph

    2015-09-01

    This report discusses the quality assurance activities needed to raise the Quality Level of Risk Analysis in a Virtual Environment (RAVEN) from Quality Level 3 to Quality Level 2. This report also describes the general RAVEN quality assurance activities. For improving the quality, reviews of code changes have been instituted, more parts of testing have been automated, and improved packaging has been created. For upgrading the quality level, requirements have been created and the workflow has been improved.

  2. Application of refractometry to quality assurance monitoring of parenteral nutrition solutions.

    PubMed

    Chang, Wei-Kuo; Chao, You-Chen; Yeh, Ming-Kung

    2008-01-01

    Parenteral nutrition (PN) solution contains various concentrations of dextrose, amino acids, lipids, vitamins, electrolytes, and trace elements. Incorrect preparation of PN solution could lead to patient death. In this study we used the refractive index as a quality assurance tool to monitor the preparation of PN solution. Refractive indices of single nutrient components and PN solutions consisting of various concentrations of dextrose, amino acids, electrolytes, and lipids were measured. A mathematical equation and its linear plot were generated then used to predict the refractive index of the PN solution. The best-fit refractive index for PN solution (i.e., the predicted refractive index)=0.9798x(% dextrose)+1.2889x(% amino acids)+1.1017x(% lipids)+0.9440x(% sum of the electrolytes)+0.5367 (r2=0.99). This equation was validated by comparing the measured refractive indices of 500 clinical PN solutions to their predicted refractive indices. We found that 2 of the 500 prepared samples (0.4%) had less than the predicted refractive index (<95%). Refractive index can be used as a reliable quality assurance tool for monitoring PN preparation. Such information can be obtained at the bedside and used to confirm the accuracy of the PN solution composition.

  3. Why Quality Assurance?

    PubMed Central

    Alexander, Leslie L.; Lewis, Nathan

    1981-01-01

    Quality assurance programs in radiology are essential and each radiologist must be committed to exert comprehensive efforts toward excellent quality control. Identification and evaluation of a radiological problem, corrective action, and good record keeping are essential features of a well-managed quality assurance program. This paper discusses the background and impact of these programs on providing safe radiologic services to patients. PMID:7218367

  4. Quality assurance of metabolomics.

    PubMed

    Bouhifd, Mounir; Beger, Richard; Flynn, Thomas; Guo, Lining; Harris, Georgina; Hogberg, Helena; Kaddurah-Daouk, Rima; Kamp, Hennicke; Kleensang, Andre; Maertens, Alexandra; Odwin-DaCosta, Shelly; Pamies, David; Robertson, Donald; Smirnova, Lena; Sun, Jinchun; Zhao, Liang; Hartung, Thomas

    2015-01-01

    Metabolomics promises a holistic phenotypic characterization of biological responses to toxicants. This technology is based on advanced chemical analytical tools with reasonable throughput, including mass-spectroscopy and NMR. Quality assurance, however - from experimental design, sample preparation, metabolite identification, to bioinformatics data-mining - is urgently needed to assure both quality of metabolomics data and reproducibility of biological models. In contrast to microarray-based transcriptomics, where consensus on quality assurance and reporting standards has been fostered over the last two decades, quality assurance of metabolomics is only now emerging. Regulatory use in safety sciences, and even proper scientific use of these technologies, demand quality assurance. In an effort to promote this discussion, an expert workshop discussed the quality assurance needs of metabolomics. The goals for this workshop were 1) to consider the challenges associated with metabolomics as an emerging science, with an emphasis on its application in toxicology and 2) to identify the key issues to be addressed in order to establish and implement quality assurance procedures in metabolomics-based toxicology. Consensus has still to be achieved regarding best practices to make sure sound, useful, and relevant information is derived from these new tools.

  5. Quality Assurance Through Reimbursement

    PubMed Central

    Shaughnessy, Peter W.; Kurowski, Bettina

    1982-01-01

    Quality assurance and reimbursement programs normally function separately in the health care field. This paper reviews objectives and certain conceptual issues associated with each type of program. Its primary intent is to summarize substantive and operational topics which must be addressed if quality of care is to be enhanced through reimbursement. The focus is on methods for integrating quality assurance and reimbursement. The final section presents topics for future research. PMID:6807939

  6. Software quality assurance handbook

    SciTech Connect

    Not Available

    1990-09-01

    There are two important reasons for Software Quality Assurance (SQA) at Allied-Signal Inc., Kansas City Division (KCD): First, the benefits from SQA make good business sense. Second, the Department of Energy has requested SQA. This handbook is one of the first steps in a plant-wide implementation of Software Quality Assurance at KCD. The handbook has two main purposes. The first is to provide information that you will need to perform software quality assurance activities. The second is to provide a common thread to unify the approach to SQA at KCD. 2 figs.

  7. Quality assurance and accreditation.

    PubMed

    1997-01-01

    In 1996, the Joint Commission International (JCI), which is a partnership between the Joint Commission on Accreditation of Healthcare Organizations and Quality Healthcare Resources, Inc., became one of the contractors of the Quality Assurance Project (QAP). JCI recognizes the link between accreditation and quality, and uses a collaborative approach to help a country develop national quality standards that will improve patient care, satisfy patient-centered objectives, and serve the interest of all affected parties. The implementation of good standards provides support for the good performance of professionals, introduces new ideas for improvement, enhances the quality of patient care, reduces costs, increases efficiency, strengthens public confidence, improves management, and enhances the involvement of the medical staff. Such good standards are objective and measurable; achievable with current resources; adaptable to different institutions and cultures; and demonstrate autonomy, flexibility, and creativity. The QAP offers the opportunity to approach accreditation through research efforts, training programs, and regulatory processes. QAP work in the area of accreditation has been targeted for Zambia, where the goal is to provide equal access to cost-effective, quality health care; Jordan, where a consensus process for the development of standards, guidelines, and policies has been initiated; and Ecuador, where JCI has been asked to help plan an approach to the evaluation and monitoring of the health care delivery system.

  8. Quality assurance and benchmarking for radical cystectomy: monitoring early complications and mortality using cumulative summation charts.

    PubMed

    Chalasani, Venu; Abdelhady, Mazen; Stitt, Larry; Izawa, Jonathan I

    2009-04-01

    Cumulative summation is one method for quality assurance that has recently been adapted to the medical field to monitor any binary surgical outcomes on an ongoing basis. In this study we used cumulative summation charts for quality assurance in radical cystectomies. Cumulative summation charts were generated from prospectively collected data for the first 150 radical cystectomies performed by a single surgeon from 2001 to 2007. Overall and disease specific survival were estimated using the Kaplan-Meier actuarial methodology and stratified by pathological stage. Based on a literature review acceptable rates were identified as death 0.3% to 4%, ureterointestinal leak 0.3% to 1%, unplanned reoperation 2.3% to 17%, myocardial infarction 0.3% to 2% and pulmonary embolism 0.4% to 2%. Median followup was 16 months. There were 12, 12, 41, 26, 25 and 34 patients with pTis, pT1, pT2, pT3, pT4 and pN+ disease, respectively. The 5-year disease specific survival for less than pT2, pT2, pT3, pT4 and pN+ was 92%, 90%, 60%, 51% and 30%, respectively. The occurrence of postoperative death, rectal injury, ureterointestinal anastomotic leak, immediate reoperation, myocardial infarction and pulmonary embolus for the 150 patients was 1, 0, 3, 2, 2 and 3, respectively. Cumulative summation graphs allowed a visual guide to the key performance indicators. Using cumulative summation surgeons can continuously identify if their morbidity or mortality rates are approaching benchmark limits. This approach may provide more timely information when alterations in surgical technique, patient selection and perioperative care should be considered if benchmark limits are being approached for a variety of surgical outcomes.

  9. Laser Welding Process Monitoring Systems: Advanced Signal Analysis for Quality Assurance

    NASA Astrophysics Data System (ADS)

    D'Angelo, Giuseppe

    Laser material processing today is widely used in industry. Especially laser welding became one of the key-technologies, e. g., for the automotive sector. This is due to the improvement and development of new laser sources and the increasing knowledge gained at countless scientific research projects. Nevertheless, it is still not possible to use the full potential of this technology. Therefore, the introduction and application of quality-assuring systems is required. For a long time, the statement "the best sensor is no sensor" was often heard. Today, a change of paradigm can be observed. On the one hand, ISO 9000 and other by law enforced regulations have led to the understanding that quality monitoring is an essential tool in modern manufacturing and necessary in order to keep production results in deterministic boundaries. On the other hand, rising quality requirements not only set higher and higher requirements for the process technology but also demand qualityassurance measures which ensure the reliable recognition of process faults. As a result, there is a need for reliable online detection and correction of welding faults by means of an in-process monitoring. The chapter describes an advanced signals analysis technique to extract information from signals detected, during the laser welding process, by optical sensors. The technique is based on the method of reassignment which was first applied to the spectrogram by Kodera, Gendrin and de Villedary22,23 and later generalized to any bilinear time-frequency representation by Auger and Flandrin.24 Key to the method is a nonlinear convolution where the value of the convolution is not placed at the center of the convolution kernel but rather reassigned to the center of mass of the function within the kernel. The resulting reassigned representation yields significantly improved components localization. We compare the proposed time-frequency distributions by analyzing signals detected during the laser welding of

  10. Read Code Quality Assurance

    PubMed Central

    Schulz, Erich; Barrett, James W.; Price, Colin

    1998-01-01

    As controlled clinical vocabularies assume an increasing role in modern clinical information systems, so the issue of their quality demands greater attention. In order to meet the resulting stringent criteria for completeness and correctness, a quality assurance system comprising a database of more than 500 rules is being developed and applied to the Read Thesaurus. The authors discuss the requirement to apply quality assurance processes to their dynamic editing database in order to ensure the quality of exported products. Sources of errors include human, hardware, and software factors as well as new rules and transactions. The overall quality strategy includes prevention, detection, and correction of errors. The quality assurance process encompasses simple data specification, internal consistency, inspection procedures and, eventually, field testing. The quality assurance system is driven by a small number of tables and UNIX scripts, with “business rules” declared explicitly as Structured Query Language (SQL) statements. Concurrent authorship, client-server technology, and an initial failure to implement robust transaction control have all provided valuable lessons. The feedback loop for error management needs to be short. PMID:9670131

  11. Quality assurance for the clinical implementation of kilovoltage intrafraction monitoring for prostate cancer VMAT

    SciTech Connect

    Ng, J. A.; Booth, J. T.; O’Brien, R. T.; Huang, C.-Y.; Keall, P. J.; Colvill, E.; Poulsen, P. R.

    2014-11-01

    Purpose: Kilovoltage intrafraction monitoring (KIM) is a real-time 3D tumor monitoring system for cancer radiotherapy. KIM uses the commonly available gantry-mounted x-ray imager as input, making this method potentially more widely available than dedicated real-time 3D tumor monitoring systems. KIM is being piloted in a clinical trial for prostate cancer patients treated with VMAT (NCT01742403). The purpose of this work was to develop clinical process and quality assurance (QA) practices for the clinical implementation of KIM. Methods: Informed by and adapting existing guideline documents from other real-time monitoring systems, KIM-specific QA practices were developed. The following five KIM-specific QA tests were included: (1) static localization accuracy, (2) dynamic localization accuracy, (3) treatment interruption accuracy, (4) latency measurement, and (5) clinical conditions accuracy. Tests (1)–(4) were performed using KIM to measure static and representative patient-derived prostate motion trajectories using a 3D programmable motion stage supporting an anthropomorphic phantom with implanted gold markers to represent the clinical treatment scenario. The threshold for system tolerable latency is <1 s. The tolerances for all other tests are that both the mean and standard deviation of the difference between the programmed trajectory and the measured data are <1 mm. The (5) clinical conditions accuracy test compared the KIM measured positions with those measured by kV/megavoltage (MV) triangulation from five treatment fractions acquired in a previous pilot study. Results: For the (1) static localization, (2) dynamic localization, and (3) treatment interruption accuracy tests, the mean and standard deviation of the difference are <1.0 mm. (4) The measured latency is 350 ms. (5) For the tests with previously acquired patient data, the mean and standard deviation of the difference between KIM and kV/MV triangulation are <1.0 mm. Conclusions: Clinical process and

  12. Quality assurance for online adapted treatment plans: Benchmarking and delivery monitoring simulation

    SciTech Connect

    Li, Taoran Wu, Qiuwen; Yang, Yun; Rodrigues, Anna; Yin, Fang-Fang; Jackie Wu, Q.

    2015-01-15

    Purpose: An important challenge facing online adaptive radiation therapy is the development of feasible and efficient quality assurance (QA). This project aimed to validate the deliverability of online adapted plans and develop a proof-of-concept online delivery monitoring system for online adaptive radiation therapy QA. Methods: The first part of this project benchmarked automatically online adapted prostate treatment plans using traditional portal dosimetry IMRT QA. The portal dosimetry QA results of online adapted plans were compared to original (unadapted) plans as well as randomly selected prostate IMRT plans from our clinic. In the second part, an online delivery monitoring system was designed and validated via a simulated treatment with intentional multileaf collimator (MLC) errors. This system was based on inputs from the dynamic machine information (DMI), which continuously reports actual MLC positions and machine monitor units (MUs) at intervals of 50 ms or less during delivery. Based on the DMI, the system performed two levels of monitoring/verification during the delivery: (1) dynamic monitoring of cumulative fluence errors resulting from leaf position deviations and visualization using fluence error maps (FEMs); and (2) verification of MLC positions against the treatment plan for potential errors in MLC motion and data transfer at each control point. Validation of the online delivery monitoring system was performed by introducing intentional systematic MLC errors (ranging from 0.5 to 2 mm) to the DMI files for both leaf banks. These DMI files were analyzed by the proposed system to evaluate the system’s performance in quantifying errors and revealing the source of errors, as well as to understand patterns in the FEMs. In addition, FEMs from 210 actual prostate IMRT beams were analyzed using the proposed system to further validate its ability to catch and identify errors, as well as establish error magnitude baselines for prostate IMRT delivery

  13. Quality assurance for online adapted treatment plans: benchmarking and delivery monitoring simulation.

    PubMed

    Li, Taoran; Wu, Qiuwen; Yang, Yun; Rodrigues, Anna; Yin, Fang-Fang; Jackie Wu, Q

    2015-01-01

    An important challenge facing online adaptive radiation therapy is the development of feasible and efficient quality assurance (QA). This project aimed to validate the deliverability of online adapted plans and develop a proof-of-concept online delivery monitoring system for online adaptive radiation therapy QA. The first part of this project benchmarked automatically online adapted prostate treatment plans using traditional portal dosimetry IMRT QA. The portal dosimetry QA results of online adapted plans were compared to original (unadapted) plans as well as randomly selected prostate IMRT plans from our clinic. In the second part, an online delivery monitoring system was designed and validated via a simulated treatment with intentional multileaf collimator (MLC) errors. This system was based on inputs from the dynamic machine information (DMI), which continuously reports actual MLC positions and machine monitor units (MUs) at intervals of 50 ms or less during delivery. Based on the DMI, the system performed two levels of monitoring/verification during the delivery: (1) dynamic monitoring of cumulative fluence errors resulting from leaf position deviations and visualization using fluence error maps (FEMs); and (2) verification of MLC positions against the treatment plan for potential errors in MLC motion and data transfer at each control point. Validation of the online delivery monitoring system was performed by introducing intentional systematic MLC errors (ranging from 0.5 to 2 mm) to the DMI files for both leaf banks. These DMI files were analyzed by the proposed system to evaluate the system's performance in quantifying errors and revealing the source of errors, as well as to understand patterns in the FEMs. In addition, FEMs from 210 actual prostate IMRT beams were analyzed using the proposed system to further validate its ability to catch and identify errors, as well as establish error magnitude baselines for prostate IMRT delivery. Online adapted plans were

  14. Quality assurance and quality control methodologies used within the Austrian UV monitoring network.

    PubMed

    Mario, Blumthaler

    2004-01-01

    The Austrian UVB monitoring network is operational since 1997. Nine detectors for measuring erythemally weighted solar UV irradiance are distributed over Austria in order to cover the main populated areas as well as different levels of altitude. The detectors are calibrated to indicate the UV-Index, the internationally agreed unit for erythemally weighted solar UV irradiance. Calibration is carried out in the laboratory for determination of spectral sensitivity of each detector, and under the sun for absolute comparison with a well-calibrated, double-monochromator spectroradiometer. For the conversion from detector-weighted units to erythemally weighted units a lookup table is used, which is calculated using a radiative transfer model and which reflects the dependence of the conversion on the solar zenith angle and total ozone content of the atmosphere. The uncertainty of the calibration is about +/-7%, dominated by the uncertainty of the calibration lamp for the spectroradiometer (+/-4%). The long-term stability of this type of detectors has been found to be not satisfactory. Therefore, routinely every year all detectors are completely recalibrated. Variations of the calibration factors up to +/-10% are found. Thus, during routine operation, several measures take place for quality control. The measured data are compared to results of model calculations with a radiative transfer model, where clear sky and an aerosol-free atmosphere are assumed. At each site, the UV data are also compared with data from a co-located pyranometer measuring total solar irradiance. These two radiation quantities are well correlated, especially on clear days and when the ozone content is taken into account. If suspicious measurements are found for one detector in the network, a well-calibrated travelling reference detector of the same type is set up side-by-side, allowing the identification of relative differences of approximately 3%. If necessary, a recalibration is carried out. As the

  15. Quality Assurance for All

    ERIC Educational Resources Information Center

    Cheung, Peter P. T.; Tsui, Cecilia B. S.

    2010-01-01

    For higher education reform, most decision-makers aspire to achieving a higher participation rate and a respectable degree of excellence with diversity at the same time. But very few know exactly how. External quality assurance is a fair basis for differentiation but there can be doubt and resistance in some quarters. Stakeholder interests differ…

  16. Quality Assurance for All

    ERIC Educational Resources Information Center

    Cheung, Peter P. T.; Tsui, Cecilia B. S.

    2010-01-01

    For higher education reform, most decision-makers aspire to achieving a higher participation rate and a respectable degree of excellence with diversity at the same time. But very few know exactly how. External quality assurance is a fair basis for differentiation but there can be doubt and resistance in some quarters. Stakeholder interests differ…

  17. Software Quality Assurance Metrics

    NASA Technical Reports Server (NTRS)

    McRae, Kalindra A.

    2004-01-01

    Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

  18. Software Quality Assurance Metrics

    NASA Technical Reports Server (NTRS)

    McRae, Kalindra A.

    2004-01-01

    Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

  19. [Medical quality assurance today].

    PubMed

    Schäfer, Robert D

    2008-01-01

    Both the quality and performance of health systems are strongly influenced by the number and the qualification of the professional staff. Quality assurance programs help to analyse causalities which are responsible for medical malpractice. On the basis of the experiences gained by the performance of established Quality Assurance Programs (QAP) in the North Rhine area since 1982 various aspects of the efficiency of these programs will be discussed. The implementation of legal regulations making these programs mandatory is criticised not only for its bureaucratic effect but also for the attempt to exclude professional experts from the interpretation of results. It is recommended to liberalize these regulations in order to facilitate improvement of methods and participation of the medical profession.

  20. Air quality management in the WHO European Region--results of a quality assurance and control programme on air quality monitoring (1994-2004).

    PubMed

    Mücke, Hans-Guido

    2008-07-01

    Since the last decade the WHO Collaborating Centre for Air Quality Management and Air Pollution Control, Berlin, Germany, operates a quality assurance and control (QA/QC) programme on air quality monitoring in the WHO European Region. As main activity Intercomparison workshops have been established for air monitoring network laboratories on a regular basis to harmonise air quality measurements, analysis and calibration techniques. 36 air hygiene laboratories of public health and environmental institutions of 24 countries participated in twelve Intercomparisons between 1994 and 2004. The majority was carried out for NO, NO(2), SO(2) and O(3). The results were predominantly satisfactory for automatic methods. The results of manual methods were mainly in a good, and for several concentration levels partly very good accordance with the data obtained by the monitors.

  1. Quality assurance for HIV point-of-care testing and treatment monitoring assays

    PubMed Central

    Sandstrom, Paul; Denny, Thomas N.; Hurlston, Mackenzie; Ball, Terry B.; Peeling, Rosanna W.; Boeras, Debrah I.

    2016-01-01

    In 2015, UNAIDS launched the 90-90-90 targets aimed at increasing the number of people infected with HIV to become aware of their status, access antiretroviral therapies and ultimately be virally suppressed. To achieve these goals, countries may need to scale up point-of-care (POC) testing in addition to strengthening central laboratory services. While decentralising testing increases patient access to diagnostics, it presents many challenges with regard to training and assuring the quality of tests and testing. To ensure synergies, the London School of Hygiene & Tropical Medicine held a series of consultations with countries with an interest in quality assurance and their implementing partners, and agreed on an external quality assessment (EQA) programme to ensure reliable results so that the results lead to the best possible care for HIV patients. As a result of the consultations, EQA International was established, bringing together EQA providers and implementers to develop a strategic plan for countries to establish national POC EQA programmes and to estimate the cost of setting up and maintaining the programme. With the dramatic increase in the number of proficiency testing panels required for thousands of POC testing sites across Africa, it is important to facilitate technology transfer from global EQA providers to a network of regional EQA centres in Africa for regional proficiency testing panel production. EQA International will continue to identify robust and cost-effective EQA technologies for quality POC testing, integrating novel technologies to support sustainable country-owned EQA programmes in Africa. PMID:28879133

  2. Quality Assurance for University Teaching.

    ERIC Educational Resources Information Center

    Ellis, Roger, Ed.

    This book, written from a British perspective, presents 17 papers on quality assurance in teaching at the university level. The first eight papers address issues of assuring quality and include: (1) "Quality Assurance for University Teaching; Issues and Approaches" (Roger Ellis); (2) "A British Standard for University…

  3. Quality Assurance in Nursing Homes.

    ERIC Educational Resources Information Center

    Balgopal, Pallassana R.; And Others

    This manual, developed for the nursing home employee, examines the concept of quality assurance in nursing homes, describes the benefits of an effective quality assurance program, and provides guidelines to aid nursing homes in developing an appropriate quality assurance program. After a brief introduction, a working definition of quality…

  4. Monitoring Daily QA 3 constancy for routine quality assurance on linear accelerators.

    PubMed

    Binny, Diana; Lancaster, Craig M; Kairn, Tanya; Trapp, Jamie V; Crowe, Scott B

    2016-11-01

    The purpose of this study was to evaluate the suitability of the Daily QA 3 (Sun Nuclear Corporation, Melbourne, USA) device as a safe quality assurance device for control of machine specific parameters, such as linear accelerator output, beam quality and beam flatness and symmetry. Measurements were performed using three Varian 2300iX linear accelerators. The suitability of Daily QA 3 as a device for quality control of linear accelerator parameters was investigated for both 6 and 10MV photons and 6, 9, 12, 15 and 18MeV electrons. Measurements of machine specific using the Daily QA 3 device were compared to corresponding measurements using a simpler constancy meter, Farmer chamber and plane parallel ionisation chamber in a water tank. The Daily QA 3 device showed a linear dose response making it a suitable device for detection of output variations during routine measurements. It was noted that over estimations of variations compared with Farmer chamber readings were seen if the Daily QA 3 wasn't calibrated for output and sensitivity on a regular eight to ten monthly basis. Temperature-pressure correction factors calculated by Daily QA 3 also contributed towards larger short term variations seen in output measurements. Energy, symmetry and flatness variations detected by Daily QA 3 were consistent with measurements performed in water tank using a parallel plate chamber. It was concluded that the Daily QA 3 device is suitable for routine daily and fortnightly quality assurance of linear accelerator beam parameters however a regular eight-ten monthly dose and detector array calibration will improve error detection capabilities of the device.

  5. The quality assurance liaison: Combined technical and quality assurance support

    SciTech Connect

    Bolivar, S.L.; Day, J.L.

    1993-03-01

    This paper describes the role of the quality assurance liaison, the responsibilities of this position, and the evolutionary changes in duties over the last six years. The role of the quality assurance liaison has had a very positive impact on the Los Alamos Yucca Mountain Site Characterization (YW) quality assurance program. Having both technical and quality assurance expertise, the quality assurance liaisons are able to facilitate communications with scientists on quality assurance issues and requirements, thereby generating greater productivity in scientific investigations. The quality assurance liaisons help ensure that the scientific community knows and implements existing requirements, is aware of new or changing regulations, and is able to conduct scientific work within Project requirements. The influence of the role of the quality assurance liaison can be measured by an overall improvement in attitude of the staff regarding quality assurance requirements and improved job performance, as well as a decrease in deficiencies identified during both internal and external audits and surveillances. This has resulted in a more effective implementation of quality assurance requirements.

  6. The quality assurance liaison: Combined technical and quality assurance support

    NASA Astrophysics Data System (ADS)

    Bolivar, S. L.; Day, J. L.

    1993-03-01

    The role of the quality assurance liaison, the responsibilities of this position, and the evolutionary changes in duties over the last six years are described. The role of the quality assurance liaison has had a very positive impact on the Los Alamos Yucca Mountain Site Characterization (YW) quality assurance program. Having both technical and quality assurance expertise, the quality assurance liaisons are able to facilitate communications with scientists on quality assurance issues and requirements, thereby generating greater productivity in scientific investigations. The quality assurance liaisons help ensure that the scientific community knows and implements existing requirements, is aware of new or changing regulations, and is able to conduct scientific work within Project requirements. The influence of the role of the quality assurance liaison can be measured by an overall improvement in attitude of the staff regarding quality assurance requirements and improved job performance, as well as a decrease in deficiencies identified during both internal and external audits and surveillances. This has resulted in a more effective implementation of quality assurance requirements.

  7. Quality Assurance Project Plan Development Tool

    EPA Pesticide Factsheets

    This tool contains information designed to assist in developing a Quality Assurance (QA) Project Plan that meets EPA requirements for projects that involve surface or groundwater monitoring and/or the collection and analysis of water samples.

  8. Advanced Software Quality Assurance

    DTIC Science & Technology

    1977-03-01

    ment Head, General Research Corporation reports are subject to Independent review by a staff member not connected with the project. This report...ö CR^-72,0 / y < BwKmTö^RoTi T^W^n TNÖ^RcTN^rTlON NAME AND ADDRESS General Research Corporation / P.O. Box 3587 / Santa Barbara, CA...Idrnlily tt* block numb«" This is a report of the work performed by General Research Corporation during the Advanced Software Quality Assurance contract

  9. Exposing exposure: enhancing patient safety through automated data mining of nuclear medicine reports for quality assurance and organ dose monitoring.

    PubMed

    Ikuta, Ichiro; Sodickson, Aaron; Wasser, Elliot J; Warden, Graham I; Gerbaudo, Victor H; Khorasani, Ramin

    2012-08-01

    To develop and validate an open-source informatics toolkit capable of creating a radiation exposure data repository from existing nuclear medicine report archives and to demonstrate potential applications of such data for quality assurance and longitudinal patient-specific radiation dose monitoring. This study was institutional review board approved and HIPAA compliant. Informed consent was waived. An open-source toolkit designed to automate the extraction of data on radiopharmaceuticals and administered activities from nuclear medicine reports was developed. After iterative code training, manual validation was performed on 2359 nuclear medicine reports randomly selected from September 17, 1985, to February 28, 2011. Recall (sensitivity) and precision (positive predictive value) were calculated with 95% binomial confidence intervals. From the resultant institutional data repository, examples of usage in quality assurance efforts and patient-specific longitudinal radiation dose monitoring obtained by calculating organ doses from the administered activity and radiopharmaceutical of each examination were provided. Validation statistics yielded a combined recall of 97.6% ± 0.7 (95% confidence interval) and precision of 98.7% ± 0.5. Histograms of administered activity for fluorine 18 fluorodeoxyglucose and iodine 131 sodium iodide were generated. An organ dose heatmap which displays a sample patient's dose accumulation from multiple nuclear medicine examinations was created. Large-scale repositories of radiation exposure data can be extracted from institutional nuclear medicine report archives with high recall and precision. Such repositories enable new approaches in radiation exposure patient safety initiatives and patient-specific radiation dose monitoring.

  10. 40 CFR 75.45 - Daily quality assurance criteria.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Daily quality assurance criteria. 75... (CONTINUED) CONTINUOUS EMISSION MONITORING Alternative Monitoring Systems § 75.45 Daily quality assurance... that such tests are unnecessary for providing quality-assured data....

  11. 40 CFR 75.45 - Daily quality assurance criteria.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Daily quality assurance criteria. 75... (CONTINUED) CONTINUOUS EMISSION MONITORING Alternative Monitoring Systems § 75.45 Daily quality assurance... that such tests are unnecessary for providing quality-assured data....

  12. Principles and Practices for Quality Assurance and Quality Control

    USGS Publications Warehouse

    Jones, Berwyn E.

    1999-01-01

    Quality assurance and quality control are vital parts of highway runoff water-quality monitoring projects. To be effective, project quality assurance must address all aspects of the project, including project management responsibilities and resources, data quality objectives, sampling and analysis plans, data-collection protocols, data quality-control plans, data-assessment procedures and requirements, and project outputs. Quality control ensures that the data quality objectives are achieved as planned. The historical development and current state of the art of quality assurance and quality control concepts described in this report can be applied to evaluation of data from prior projects.

  13. Construction quality assurance report

    SciTech Connect

    Roscha, V.

    1994-09-08

    This report provides a summary of the construction quality assurance (CQA) observation and test results, including: The results of the geosynthetic and soil materials conformance testing. The observation and testing results associates with the installation of the soil liners. The observation and testing results associated with the installation of the HDPE geomembrane liner systems. The observation and testing results associated with the installation of the leachate collection and removal systems. The observation and testing results associated with the installation of the working surfaces. The observation and testing results associated with in-plant manufacturing process. Summary of submittal reviews by Golder Construction Services, Inc. The submittal and certification of the piping material specifications. The observation and verification associated of the Acceptance Test Procedure results of the operational equipment functions. Summary of the ECNs which are incorporated into the project.

  14. Quality Assurance [for Persons with Developmental Disabilities].

    ERIC Educational Resources Information Center

    Lakin, Charlie, Ed.; And Others

    1993-01-01

    This newsletter feature issue focuses on quality assurance and innovative efforts to enhance service quality for persons with developmental disabilities. Individual articles include: "Redesigning Quality Assurance" (Clarence J. Sundram); "Quality Assurance, Quality Enhancement" (Charlie Lakin et al.); "Challenging…

  15. Loch Vale Watershed Long-Term Ecological Research and Monitoring Program: Quality Assurance Report, 2003-09

    USGS Publications Warehouse

    Richer, Eric E.; Baron, Jill S.

    2011-01-01

    The Loch Vale watershed project is a long-term research and monitoring program located in Rocky Mountain National Park that addresses watershed-scale ecosystem processes, particularly as they respond to atmospheric deposition and climate variability. Measurements of precipitation depth, precipitation chemistry, discharge, and surface-water quality are made within the watershed and elsewhere in Rocky Mountain National Park. As data collected for the program are used by resource managers, scientists, policy makers, and students, it is important that all data collected in Loch Vale watershed meet high standards of quality. In this report, data quality was evaluated for precipitation, discharge, and surface-water chemistry measurements collected during 2003-09. Equipment upgrades were made at the Loch Vale National Atmospheric Deposition Program monitoring site to improve precipitation measurements and evaluate variability in precipitation depth and chemistry. Additional solar panels and batteries have been installed to improve the power supply, and data completeness, at the NADP site. As a result of equipment malfunction, discharge data for the Loch Outlet were estimated from October 18, 2005, to August 17, 2006. Quality-assurance results indicate that more than 98 percent of all surface-water chemistry measurements were accurate and precise. Records that did not meet quality criteria were removed from the database. Measurements of precipitation depth, precipitation chemistry, discharge, and surface-water quality were all sufficiently complete and consistent to support project data needs.

  16. Monitor and Evaluate the Impacts of Air Quality Assurance and Emergency Response Strategy

    NASA Astrophysics Data System (ADS)

    Huang, C.; Xiao, H.; Tong, L.; He, J.; Yu, H.; Xu, H.; Dai, X.; Zhang, H.; Huang, Z.; Zheng, J.

    2016-12-01

    During major national events, some much stricter air quality assurance programs and emergency response strategies were implemented by the Chinese government. The 2008 Beijing Olympic game and 2014 APEC meeting were just two of these examples. Such practices provided us some rare opportunities to compare and characterize the different type of sources and evaluate the impacts of these pollutant control policies. The mixing ratios of ozone and nitrogen oxides at several sites around Hangzhou city were continuously measured from August to late September 2016 to investigate the spatiotemporal characteristics of air pollutants and their relationships with environmental variables. The aerosol samples were also collected from these sites before, during and after the G20 2016 Summit. The organic components and carbon isotope ratio of these particle samples were analyzed. Through comparing the chemical composition and isotope ratio variation before and after the implement of the pollutant control program, we try to identify/distinguish the characteristics of stationary and mobile sources, and evaluate the contribution of local sources and long range atmospheric transport to the experimental area with the help of statistical and modeling tools.

  17. Quality assurance of personal beta particle dosemeters used for individual monitoring of occupationally exposed persons.

    PubMed

    Helmstädter, Klaus; Ambrosi, Peter

    2007-01-01

    As a result of investigations and intercomparison measurements organised from 1996 to 1999 by PTB, several types of personal dosemeters, all based on TLD, were selected by the dosimetry services for the measurement of the personal dose equivalent Hp(0.07) in beta and/or photon radiation fields. These dosemeters have now the status of legal personal beta partial-body dosemeters. Workplaces at which beta radiation might significantly contribute to the doses to the extremities are to be found today with increasing frequency in radiation therapy, radiation source production and nuclear power plants. Quality assurance for beta personal dosemeters is stipulated by guidelines for the official dosimetry service and is carried out by way of the intercomparison measurements organised periodically by the PTB. The results are evaluated based on the recommendations of the German Commission on Radiological Protection (SSK). The procedure of these intercomparison measurements will be explained in detail. The experience gained from three series of comparisons with seven types of fingerring dosemeters will be described and the results will be presented. The anonymity of the dosemeter types and of the participants in the intercomparison will be preserved.

  18. SAPHIRE 8 Software Quality Assurance Oversight

    SciTech Connect

    Kurt G. Vedros

    2011-09-01

    The software quality assurance oversight consists of updating and maintaining revision control of the SAPHIRE 8 quality assurance program documentation and of monitoring revision control of the SAPHIRE 8 source code. This report summarizes the oversight efforts through description of the revision control system (RCS) setup, operation and contents. Documents maintained under revision control include the Acceptance Test Plan (ATP), Configuration Management Plan, Quality Assurance Plan, Software Project Plan, Requirements Traceability Matrix (RTM), System Test Plan, SDP Interface Training Manual, and the SAPHIRE 8, 'New Features and Capabilities Overview'.

  19. HPV DNA testing of the residual sample of liquid-based Pap test: utility as a quality assurance monitor.

    PubMed

    Zuna, R E; Moore, W; Dunn, S T

    2001-03-01

    HPV DNA testing of the residual sample volume of liquid-based Pap tests has been recommended as a way to determine the appropriate follow-up for women who have equivocal results in routine clinical screening. A major aspect of quality assurance in the cytopathology laboratory consists of correlation of smear interpretation with biopsy or conization results as mandated by CLIA '88. However, the use of histology as the gold standard suffers from similar problems of subjectivity and sampling as the Pap smear. In this study we explore the potential use of HPV DNA testing of the residual volume from the ThinPrep Pap Test (Cytyc Corporation, Boxborough, Massachusetts) as a substitute gold standard in quality assurance monitoring of a cervical cytology screening program. The residual samples from 397 ThinPrep Pap cases were retrospectively analyzed for high-risk HPV DNA using the Hybrid Capture II technique. Sensitivity (71.8%), specificity (86.5%), predictive value of positive (77.1%) and negative (82.9%) ThinPrep Pap interpretations were calculated on the basis of HPV DNA results for 266 cases classed as either squamous intraepithelial lesion (SIL) or negative. Overall, there was agreement between the two tests in 80.8% of cases (Cohen's kappa =.59). The percentage of HPV DNA-positive cases interpreted as atypical squamous cells of uncertain significance (ASCUS) was 43.7%, and the percentage of negative cases was 17.1%. We believe that this approach is an objective adjunct to the traditional quality assurance protocol, with the added benefit that it includes cases interpreted as negative, as well as abnormal cases that do not come to biopsy.

  20. [Quality assurance in medical care].

    PubMed

    Oberender, P; Daumann, F

    1996-01-01

    The demand for quality assurance in Germany's health care system has been on the increase since promulgation of the Germany Statutory Health Service Reform law. To control, to assure and to improve quality a vast array of different systems is used by health care providers. All these systems work in a similar manner. The desired level of quality is determined and compared with the actually achieved level. If a deviation of quality is observed, actions for quality improvement are instituted. However, there are some problems that make quality assurance a difficult problem. Since the level of quality is a result of a patient's individual evaluation it is very difficult to set a common level. Another problem is to find valid criteria to measure the degree of quality. Finally, further research is necessary to analyse benefits and costs of introducing a quality assurance system.

  1. Quality Assurance and Nursing Education

    ERIC Educational Resources Information Center

    Strauss, Mary Beth

    1978-01-01

    Preparation for quality assurance in nursing care must begin in basic nursing education, continue through the graduate and doctoral levels, and be provided for practicing nurses through continuing education activities, according to the author. She discusses the meaning of quality assurance and its integration into the nursing curriculum. (MF)

  2. Recent Trends in Quality Assurance

    ERIC Educational Resources Information Center

    Amaral, Alberto; Rosa, Maria Joao

    2010-01-01

    In this paper we present a brief description of the evolution of quality assurance in Europe, paying particular attention to its relationship to the rising loss of trust in higher education institutions. We finalise by analysing the role of the European Commission in the setting up of new quality assurance mechanisms that tend to promote…

  3. Exposing Exposure: Enhancing Patient Safety through Automated Data Mining of Nuclear Medicine Reports for Quality Assurance and Organ Dose Monitoring

    PubMed Central

    Ikuta, Ichiro; Wasser, Elliot J.; Warden, Graham I.; Gerbaudo, Victor H.; Khorasani, Ramin

    2012-01-01

    Purpose: To develop and validate an open-source informatics toolkit capable of creating a radiation exposure data repository from existing nuclear medicine report archives and to demonstrate potential applications of such data for quality assurance and longitudinal patient-specific radiation dose monitoring. Materials and Methods: This study was institutional review board approved and HIPAA compliant. Informed consent was waived. An open-source toolkit designed to automate the extraction of data on radiopharmaceuticals and administered activities from nuclear medicine reports was developed. After iterative code training, manual validation was performed on 2359 nuclear medicine reports randomly selected from September 17, 1985, to February 28, 2011. Recall (sensitivity) and precision (positive predictive value) were calculated with 95% binomial confidence intervals. From the resultant institutional data repository, examples of usage in quality assurance efforts and patient-specific longitudinal radiation dose monitoring obtained by calculating organ doses from the administered activity and radiopharmaceutical of each examination were provided. Results: Validation statistics yielded a combined recall of 97.6% ± 0.7 (95% confidence interval) and precision of 98.7% ± 0.5. Histograms of administered activity for fluorine 18 fluorodeoxyglucose and iodine 131 sodium iodide were generated. An organ dose heatmap which displays a sample patient’s dose accumulation from multiple nuclear medicine examinations was created. Conclusion: Large-scale repositories of radiation exposure data can be extracted from institutional nuclear medicine report archives with high recall and precision. Such repositories enable new approaches in radiation exposure patient safety initiatives and patient-specific radiation dose monitoring. © RSNA, 2012 PMID:22627599

  4. 40 CFR 160.35 - Quality assurance unit.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Quality assurance unit. 160.35 Section... LABORATORY PRACTICE STANDARDS Organization and Personnel § 160.35 Quality assurance unit. (a) A testing facility shall have a quality assurance unit which shall be responsible for monitoring each study to...

  5. 40 CFR 160.35 - Quality assurance unit.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Quality assurance unit. 160.35 Section... LABORATORY PRACTICE STANDARDS Organization and Personnel § 160.35 Quality assurance unit. (a) A testing facility shall have a quality assurance unit which shall be responsible for monitoring each study to...

  6. Quality assurance for gamma knives

    SciTech Connect

    Jones, E.D.; Banks, W.W.; Fischer, L.E.

    1995-09-01

    This report describes and summarizes the results of a quality assurance (QA) study of the Gamma Knife, a nuclear medical device used for the gamma irradiation of intracranial lesions. Focus was on the physical aspects of QA and did not address issues that are essentially medical, such as patient selection or prescription of dose. A risk-based QA assessment approach was used. Sample programs for quality control and assurance are included. The use of the Gamma Knife was found to conform to existing standards and guidelines concerning radiation safety and quality control of external beam therapies (shielding, safety reviews, radiation surveys, interlock systems, exposure monitoring, good medical physics practices, etc.) and to be compliant with NRC teletherapy regulations. There are, however, current practices for the Gamma Knife not covered by existing, formalized regulations, standards, or guidelines. These practices have been adopted by Gamma Knife users and continue to be developed with further experience. Some of these have appeared in publications or presentations and are slowly finding their way into recommendations of professional organizations.

  7. Software Quality Assurance Audits Guidebooks

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The growth in cost and importance of software to NASA has caused NASA to address the improvement of software development across the agency. One of the products of this program is a series of guidebooks that define a NASA concept of the assurance processes that are used in software development. The Software Assurance Guidebook, NASA-GB-A201, issued in September, 1989, provides an overall picture of the NASA concepts and practices in software assurance. Second level guidebooks focus on specific activities that fall within the software assurance discipline, and provide more detailed information for the manager and/or practitioner. This is the second level Software Quality Assurance Audits Guidebook that describes software quality assurance audits in a way that is compatible with practices at NASA Centers.

  8. [Ballistic quality assurance].

    PubMed

    Cassol, E; Bonnet, J; Porcheron, D; Mazeron, J-J; Peiffert, D; Alapetite, C

    2012-06-01

    This review describes the ballistic quality assurance for stereotactic intracranial irradiation treatments delivered with Gamma Knife® either dedicated or adapted medical linear accelerators. Specific and periodic controls should be performed in order to check the mechanical stability for both irradiation and collimation systems. If this step remains under the responsibility of the medical physicist, it should be done in agreement with the manufacturer's technical support. At this time, there are no recent published guidelines. With technological developments, both frequency and accuracy should be assessed in each institution according to the treatment mode: single versus hypofractionnated dose, circular collimator versus micro-multileaf collimators. In addition, "end-to-end" techniques are mandatory to find the origin of potential discrepancies and to estimate the global ballistic accuracy of the delivered treatment. Indeed, they include frames, non-invasive immobilization devices, localizers, multimodal imaging for delineation and in-room positioning imaging systems. The final precision that could be reasonably achieved is more or less 1mm. Copyright © 2012 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

  9. Modernization of software quality assurance

    NASA Technical Reports Server (NTRS)

    Bhaumik, Gokul

    1988-01-01

    The customers satisfaction depends not only on functional performance, it also depends on the quality characteristics of the software products. An examination of this quality aspect of software products will provide a clear, well defined framework for quality assurance functions, which improve the life-cycle activities of software development. Software developers must be aware of the following aspects which have been expressed by many quality experts: quality cannot be added on; the level of quality built into a program is a function of the quality attributes employed during the development process; and finally, quality must be managed. These concepts have guided our development of the following definition for a Software Quality Assurance function: Software Quality Assurance is a formal, planned approach of actions designed to evaluate the degree of an identifiable set of quality attributes present in all software systems and their products. This paper is an explanation of how this definition was developed and how it is used.

  10. Modernization of software quality assurance

    NASA Technical Reports Server (NTRS)

    Bhaumik, Gokul

    1988-01-01

    The customers satisfaction depends not only on functional performance, it also depends on the quality characteristics of the software products. An examination of this quality aspect of software products will provide a clear, well defined framework for quality assurance functions, which improve the life-cycle activities of software development. Software developers must be aware of the following aspects which have been expressed by many quality experts: quality cannot be added on; the level of quality built into a program is a function of the quality attributes employed during the development process; and finally, quality must be managed. These concepts have guided our development of the following definition for a Software Quality Assurance function: Software Quality Assurance is a formal, planned approach of actions designed to evaluate the degree of an identifiable set of quality attributes present in all software systems and their products. This paper is an explanation of how this definition was developed and how it is used.

  11. Characterization and evaluation of an integrated quality monitoring system for online quality assurance of external beam radiation therapy.

    PubMed

    Hoffman, David; Chung, Eunah; Hess, Clayton; Stern, Robin; Benedict, Stanley

    2017-01-01

    The aim of this work was to comprehensively evaluate a new large field ion chamber transmission detector, Integral Quality Monitor (IQM), for online external photon beam verification and quality assurance. The device is designed to be mounted on the linac accessory tray to measure and verify photon energy, field shape, gantry position, and fluence before and during patient treatment. Our institution evaluated the newly developed ion chamber's effect on photon beam fluence, response to dose, detection of photon fluence modification, and the accuracy of the integrated barometer, thermometer, and inclinometer. The detection of photon fluence modifications was performed by measuring 6 MV with fields of 10 cm × 10 cm and 1 cm × 1 cm "correct" beam, and then altering the beam modifiers to simulate minor and major delivery deviations. The type and magnitude of the deviations selected for evaluation were based on the specifications for photon output and MLC position reported in AAPM Task Group Report 142. Additionally, the change in ion chamber signal caused by a simulated IMRT delivery error is evaluated. The device attenuated 6 MV, 10 MV, and 15 MV photon beams by 5.43 ± 0.02%, 4.60 ± 0.02%, and 4.21 ± 0.03%, respectively. Photon beam profiles were altered with the IQM by < 1.5% in the nonpenumbra regions of the beams. The photon beam profile for a 1 cm × 1 cm(2) fields were unchanged by the presence of the device. The large area ion chamber measurements were reproducible on the same day with a 0.14% standard deviation and stable over 4 weeks with a 0.47% SD. The ion chamber's dose-response was linear (R(2) = 0.99999). The integrated thermometer agreed to a calibrated thermometer to within 1.0 ± 0.7°C. The integrated barometer agreed to a mercury barometer to within 2.3 ± 0.4 mmHg. The integrated inclinometer gantry angle measurement agreed with the spirit level at 0 and 180 degrees within 0.03 ± 0.01 degrees and 0.27 ± 0.03 at 90 and 270 degrees. For the

  12. Monitoring Compliance to Promote Quality Assurance: Development of a Mental Health Clinical Chart Audit Tool in Belize, 2013.

    PubMed

    Winer, Rachel A; Bennett, Eleanor; Murillo, Illouise; Schuetz-Mueller, Jan; Katz, Craig L

    2015-09-01

    Belize trained psychiatric nurse practitioners (PNPs) in the early 1990s to provide mental health services throughout the country. Despite overwhelming success, the program is limited by lack of monitoring, evaluation, and surveillance. To promote quality assurance, we developed a chart audit tool to monitor mental healthcare delivery compliance for initial psychiatric assessment notes completed by PNPs. After reviewing the Belize Health Information System electronic medical record system, we developed a clinical audit tool to capture 20 essential components for initial assessment clinical notes. The audit tool was then piloted for initial assessment notes completed during July through September of 2013. One hundred and thirty-four initial psychiatric interviews were audited. The average chart score among all PNPs was 9.57, ranging from 3 to 15. Twenty-three charts-or 17.2%-had a score of 14 or higher and met a 70% compliance benchmark goal. Among indicators most frequently omitted included labs ordered and named (15.7%) and psychiatric diagnosis (21.6%). Explicit statement of medications initiated with dose and frequency occurred in 47.0% of charts. Our findings provide direction for training and improvement, such as emphasizing the importance of naming labs ordered, medications and doses prescribed, and psychiatric diagnoses in initial assessment clinical notes. We hope this initial assessment helps enhance mental health delivery compliance by prompting creation of BHIS templates, development of audits tools for revisit follow-up visits, and establishment of corrective actions for low-scoring practitioners. These efforts may serve as a model for implementing quality assurance programming in other low resource settings.

  13. Radiation shielding quality assurance

    NASA Astrophysics Data System (ADS)

    Um, Dallsun

    For the radiation shielding quality assurance, the validity and reliability of the neutron transport code MCNP, which is now one of the most widely used radiation shielding analysis codes, were checked with lot of benchmark experiments. And also as a practical example, follows were performed in this thesis. One integral neutron transport experiment to measure the effect of neutron streaming in iron and void was performed with Dog-Legged Void Assembly in Knolls Atomic Power Laboratory in 1991. Neutron flux was measured six different places with the methane detectors and a BF-3 detector. The main purpose of the measurements was to provide benchmark against which various neutron transport calculation tools could be compared. Those data were used in verification of Monte Carlo Neutron & Photon Transport Code, MCNP, with the modeling for that. Experimental results and calculation results were compared in both ways, as the total integrated value of neutron fluxes along neutron energy range from 10 KeV to 2 MeV and as the neutron spectrum along with neutron energy range. Both results are well matched with the statistical error +/-20%. MCNP results were also compared with those of TORT, a three dimensional discrete ordinates code which was developed by Oak Ridge National Laboratory. MCNP results are superior to the TORT results at all detector places except one. This means that MCNP is proved as a very powerful tool for the analysis of neutron transport through iron & air and further it could be used as a powerful tool for the radiation shielding analysis. For one application of the analysis of variance (ANOVA) to neutron and gamma transport problems, uncertainties for the calculated values of critical K were evaluated as in the ANOVA on statistical data.

  14. BUILDING "BRIDGES" WITH QUALITY ASSURANCE

    EPA Science Inventory

    The papr describes how, rather than building "bridges" across centuries, quality assurance (QA) personnel have the opportunity to build bridges across technical disciplines, between public and private organizations, and between different QA groups. As reviewers and auditors of a...

  15. Redefining and expanding quality assurance.

    PubMed

    Robins, J L

    1992-12-01

    To meet the current standards of excellence necessary for blood establishments, we have learned from industry that a movement toward organization-wide quality assurance/total quality management must be made. Everyone in the organization must accept responsibility for participating in providing the highest quality products and services. Quality must be built into processes and design systems to support these quality processes. Quality assurance has been redefined to include a quality planning function described as the most effective way of designing quality into processes. A formalized quality planning process must be part of quality assurance. Continuous quality improvement has been identified as the strategy every blood establishment must support while striving for error-free processing as the long-term objective. The auditing process has been realigned to support and facilitate this same objective. Implementing organization-wide quality assurance/total quality management is one proven plan for guaranteeing the quality of the 20 million products that are transfused into 4 million patients each year and for moving toward the new order.

  16. Generating 3D hyperspectral information with lightweight UAV snapshot cameras for vegetation monitoring: From camera calibration to quality assurance

    NASA Astrophysics Data System (ADS)

    Aasen, Helge; Burkart, Andreas; Bolten, Andreas; Bareth, Georg

    2015-10-01

    This paper describes a novel method to derive 3D hyperspectral information from lightweight snapshot cameras for unmanned aerial vehicles for vegetation monitoring. Snapshot cameras record an image cube with one spectral and two spatial dimensions with every exposure. First, we describe and apply methods to radiometrically characterize and calibrate these cameras. Then, we introduce our processing chain to derive 3D hyperspectral information from the calibrated image cubes based on structure from motion. The approach includes a novel way for quality assurance of the data which is used to assess the quality of the hyperspectral data for every single pixel in the final data product. The result is a hyperspectral digital surface model as a representation of the surface in 3D space linked with the hyperspectral information emitted and reflected by the objects covered by the surface. In this study we use the hyperspectral camera Cubert UHD 185-Firefly, which collects 125 bands from 450 to 950 nm. The obtained data product has a spatial resolution of approximately 1 cm for the spatial and 21 cm for the hyperspectral information. The radiometric calibration yields good results with less than 1% offset in reflectance compared to an ASD FieldSpec 3 for most of the spectral range. The quality assurance information shows that the radiometric precision is better than 0.13% for the derived data product. We apply the approach to data from a flight campaign in a barley experiment with different varieties during the growth stage heading (BBCH 52 - 59) to demonstrate the feasibility for vegetation monitoring in the context of precision agriculture. The plant parameters retrieved from the data product correspond to in-field measurements of a single date field campaign for plant height (R2 = 0.7), chlorophyll (BGI2, R2 = 0.52), LAI (RDVI, R2 = 0.32) and biomass (RDVI, R2 = 0.29). Our approach can also be applied for other image-frame cameras as long as the individual bands of the

  17. Ensuring trial validity by data quality assurance and diversification of monitoring methods.

    PubMed

    Baigent, Colin; Harrell, Frank E; Buyse, Marc; Emberson, Jonathan R; Altman, Douglas G

    2008-01-01

    Errors in the design, the conduct, the data collection process, and the analysis of a randomized trial have the potential to affect not only the safety of the patients in the trial, but also, through the introduction of bias, the safety of future patients. Trial monitoring, defined broadly to include methods of oversight which begin when the study is designed and continue until it is reported in a publication, has a role to play in eliminating such errors. On-site monitoring can be extremely inefficient for the identification of errors most likely to compromise patient safety or bias study results. However, a variety of other monitoring strategies offer alternatives to on-site monitoring. Each new trial should conduct a risk assessment to identify the optimal means of monitoring, taking into account the likely sources of error, their consequences for patients, the study's validity, and the available resources. Trial management committees should consider central statistical monitoring a key aspect of such monitoring. The systematic application of this approach would be likely to lead to tangible benefits, and resources that are currently wasted on inefficient on-site monitoring could be diverted to increasing trial sample sizes or conducting more trials.

  18. Exposing Exposure: Automated Anatomy-specific CT Radiation Exposure Extraction for Quality Assurance and Radiation Monitoring

    PubMed Central

    Warden, Graham I.; Farkas, Cameron E.; Ikuta, Ichiro; Prevedello, Luciano M.; Andriole, Katherine P.; Khorasani, Ramin

    2012-01-01

    Purpose: To develop and validate an informatics toolkit that extracts anatomy-specific computed tomography (CT) radiation exposure metrics (volume CT dose index and dose-length product) from existing digital image archives through optical character recognition of CT dose report screen captures (dose screens) combined with Digital Imaging and Communications in Medicine attributes. Materials and Methods: This institutional review board–approved HIPAA-compliant study was performed in a large urban health care delivery network. Data were drawn from a random sample of CT encounters that occurred between 2000 and 2010; images from these encounters were contained within the enterprise image archive, which encompassed images obtained at an adult academic tertiary referral hospital and its affiliated sites, including a cancer center, a community hospital, and outpatient imaging centers, as well as images imported from other facilities. Software was validated by using 150 randomly selected encounters for each major CT scanner manufacturer, with outcome measures of dose screen retrieval rate (proportion of correctly located dose screens) and anatomic assignment precision (proportion of extracted exposure data with correctly assigned anatomic region, such as head, chest, or abdomen and pelvis). The 95% binomial confidence intervals (CIs) were calculated for discrete proportions, and CIs were derived from the standard error of the mean for continuous variables. After validation, the informatics toolkit was used to populate an exposure repository from a cohort of 54 549 CT encounters; of which 29 948 had available dose screens. Results: Validation yielded a dose screen retrieval rate of 99% (597 of 605 CT encounters; 95% CI: 98%, 100%) and an anatomic assignment precision of 94% (summed DLP fraction correct 563 in 600 CT encounters; 95% CI: 92%, 96%). Patient safety applications of the resulting data repository include benchmarking between institutions, CT protocol quality

  19. Quality assurance in bariatric surgery.

    PubMed

    Rendon, Stewart E; Pories, Walter J

    2005-08-01

    Quality assurance is a function that exists in manufacturing,engineering, and the service industry. Bariatric surgery is an undertaking with a special form of consumer product and service. In this day of limited resources and significant value exchanges among stakeholders (ie, patients, surgeons, third-party payers),the goal of the bariatric community is to deliver quality outcomes with safety, efficacy, and efficiency. The American Society for Bariatric Surgery and the Surgical Review Corporation, in conjunction with the bariatric community, will use quality assurance methods to produce quality outcomes that will satisfy the value exchanges of all stakeholders.

  20. [Quality assurance in interventional cardiology].

    PubMed

    Gülker, H

    2009-10-01

    Quality assurance in clinical studies aiming at approval of pharmaceutical products is submitted to strict rules, controls and auditing regulations. Comparative instruments to ensure quality in diagnostic and therapeutic procedures are not available in interventional cardiology, likewise in other fields of cardiovascular medicine. Quality assurance simply consists of "quality registers" with basic data not externally controlled. Based on the experiences of clinical studies and their long history of standardization it is assumed that these data may be severely flawed thus being inappropriate to set standards for diagnostic and therapeutic strategies. The precondition for quality assurance are quality data. In invasive coronary angiography and intervention medical indications, the decision making process interventional versus surgical revascularization, technical performance and after - care are essential aspects affecting quality of diagnostics and therapy. Quality data are externally controlled data. To collect quality data an appropriate infrastructure is a necessary precondition which is not existent. For an appropriate infrastructure investments have to be done both to build up as well as to sustain the necessary preconditions. As long as there are no infrastructure and no investments there will be no "quality data". There exist simply registers of data which are not proved to be a basis for significant assurance and enhancement in quality in interventional coronary cardiology. Georg Thieme Verlag KG Stuttgart, New York.

  1. Quality assurance and quality control data validation procedures used for the Love Canal and Dallas lead soil monitoring programs.

    PubMed

    Brown, K W; Black, S C

    1983-06-01

    Public awareness of soils contamination has increased in recent years due in part to the notoriety associated with the indiscriminate release, packaging, transporting and disposal of hazardous materials. In 1980, and again in 1982, the U.S. Environmental Protection Agency (EPA) was responsible for designing, implementing and conducting environmental monitoring programs at Love Canal in Niagara Falls, New York, and in Dallas, Texas, that dealt with suspected contaminated soils. Both of these monitoring programs were conducted over a relatively short time with the collection and analysis of over 4000 soil samples. The methods employed by the Environmental Protection Agency for providing soil data that was scientifically valid and of defensible quality for each of these monitoring programs are presented. Also, methods for identifying data bias, its precision and its uncertainty are identified.

  2. 40 CFR 75.21 - Quality assurance and quality control requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Quality assurance and quality control... assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner or... system according to the quality assurance and quality control procedures in appendix B of this part....

  3. 40 CFR 75.21 - Quality assurance and quality control requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Quality assurance and quality control... assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner or... system according to the quality assurance and quality control procedures in appendix B of this part....

  4. 40 CFR 75.21 - Quality assurance and quality control requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Quality assurance and quality control... assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner or... system according to the quality assurance and quality control procedures in appendix B of this part....

  5. Thoughts on Internal and External Quality Assurance

    ERIC Educational Resources Information Center

    Zhang, Jianxin

    2012-01-01

    Quality assurance of higher education is made up of two parts: internal quality assurance (IQA) and external quality assurance (EQA). Both belong to a union of the coexistence and balance of yin and yang. But in reality there exists a paradox of "confusion of quality assurance (QA) subject consciousness, singularity of social QA and lack of QA…

  6. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  7. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  8. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  9. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  10. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  11. Thoughts on Internal and External Quality Assurance

    ERIC Educational Resources Information Center

    Zhang, Jianxin

    2012-01-01

    Quality assurance of higher education is made up of two parts: internal quality assurance (IQA) and external quality assurance (EQA). Both belong to a union of the coexistence and balance of yin and yang. But in reality there exists a paradox of "confusion of quality assurance (QA) subject consciousness, singularity of social QA and lack of QA…

  12. DEMONSTRATION AND QUALITY ASSURANCE PROJECT ...

    EPA Pesticide Factsheets

    The demonstration of technologies for determining the presence of dioxin in soil and sediment is being conducted under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in Saginaw, Michigan, at Green Point Environmental Learning Center from approximately April 26 to May 6, 2004. The primary purpose of the demonstration is to evaluate innovative monitoring technologies. The technologies listed below will be demonstrated. .AhRC PCRTM Kit, Hybrizyme Corporation .Ah-IMMUNOASSY@ Kit, Paralsian, Inc. .Coplanar PCB Immunoassay Kit, Abraxis LLC .DF-l Dioxin/Furan Immunoassay Kit, CAPE Technologies L.L.C. .CALUX@ by Xenobiotic Detection Systems, Inc- .Dioxin ELISA Kit, Wako Pure Chemical Industries LTD. This demonstration plan describes the procedures that will be used to verify the performance and cost of these technologies. The plan incorporates the quality assurance and quality control elements needed to generate data of sufficient quality to document each technology's performance and cost. A separate innovative technology verification report (ITVR) will.be prepared for each technology. The ITVRs will present the demonstration findings associated with the demonstration objectives. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented performance and cost data obtained from field demonstrations.

  13. Journal Article: Quality Assurance Considerations for An Ambient Dioxin Monitoring Network

    EPA Science Inventory

    The U.S. Environmental Protection Agency initiated the National Dioxin Air Monitoring Network (NDAMN) in 1998. NDAMN has three primary purposes:
    1. To provide measurements of background atmospheric levels of dioxin-like compounds in different geographic regions of the Unite...

  14. Journal Article: Quality Assurance Considerations for An Ambient Dioxin Monitoring Network

    EPA Science Inventory

    The U.S. Environmental Protection Agency initiated the National Dioxin Air Monitoring Network (NDAMN) in 1998. NDAMN has three primary purposes:
    1. To provide measurements of background atmospheric levels of dioxin-like compounds in different geographic regions of the Unite...

  15. Assuring Quality in Education Evaluation.

    ERIC Educational Resources Information Center

    Trochim, William M. K.; Visco, Ronald J.

    1986-01-01

    A number of quality assurance educational evaluation methods are illustrated. Evaluation data obtained from the Providence, Rhode Island, school district are used. The methods are: (1) from auditing, internal control; (2) from accounting, double bookkeeping; and (3) from industrial quality control, acceptance sampling and cumulative percentage…

  16. Quality Assurance 1992-2012

    ERIC Educational Resources Information Center

    Brown, Roger

    2012-01-01

    As the author's contribution to a series marking the Golden Jubilee of the Association of University Administrators, he reflects on changes in quality assurance over the past twenty years and speculates on what the future may hold for quality as the association moves into a new and very different competitive regime. He begins by discussing the…

  17. Assuring Quality in Education Evaluation.

    ERIC Educational Resources Information Center

    Trochim, William M. K.; Visco, Ronald J.

    1986-01-01

    A number of quality assurance educational evaluation methods are illustrated. Evaluation data obtained from the Providence, Rhode Island, school district are used. The methods are: (1) from auditing, internal control; (2) from accounting, double bookkeeping; and (3) from industrial quality control, acceptance sampling and cumulative percentage…

  18. Computer graphics for quality assurance

    NASA Astrophysics Data System (ADS)

    Gott, V. W.

    1982-01-01

    The use of CAD/CAM for quality assurance at Northrop is examined. The use of on-line and library computer graphics systems by the quality assurance personnel enabled the programming of lofting for at-will retrieval. The data is used to inspect master tools check features, castings, forgings, parts with basic moldline features, drawings, and tool design drawings. Lofting requests are made if the files are found to have inadequacies, and quality assurance findings are returned to the requester in hard copy form. Continuous updating of the system is reviewed, and the relevant data for cataloguing and identifying parts and parts surfaces are outlined. A reduction of time spent in inspections of 400% has been achieved with the system.

  19. Assuring eating quality of meat.

    PubMed

    Dalen, G A

    1996-01-01

    The way of assuring quality has changed over the years, from inspection of end product to quality management systems and on-line process control. The latter concepts have had a great impact in many industries during the last decades. But the concept of Total Quality is continuos improvement so it is time to take advantage of the next generation of quality assurance tools: Quality by Design. This is the most powerful instrument in quality assurance today. Quality by design has been used with outstanding results in many industries as the automobile and the electronics industry. Maybe the meat industry will be the next? To succeed, the "eating quality attributes" that are most important to the customer must be brought into focus. The challenge to the meat research scientist is to design products and processes that take care of customer needs despite variation in the raw material and the consumer's rough handling. The Quality Management Standards are helpful in conducting the design and production process, but to focus on the right aspects, there also are need for suitable methods as Quality Function Deployment. Customer needs change and new research changes old 'truths'. This require an organisation, a quality system and a culture which can handle rapid changes and a diversity of customer needs.

  20. Waste Management Quality Assurance Plan

    SciTech Connect

    Waste Management Group

    2006-08-14

    The WMG QAP is an integral part of a management system designed to ensure that WMG activities are planned, performed, documented, and verified in a manner that assures a quality product. A quality product is one that meets all waste acceptance criteria, conforms to all permit and regulatory requirements, and is accepted at the offsite treatment, storage, and disposal facility. In addition to internal processes, this QA Plan identifies WMG processes providing oversight and assurance to line management that waste is managed according to all federal, state, and local requirements for waste generator areas. A variety of quality assurance activities are integral to managing waste. These QA functions have been identified in the relevant procedures and in subsequent sections of this plan. The WMG QAP defines the requirements of the WMG quality assurance program. These requirements are derived from Department of Energy (DOE) Order 414.1C, Quality Assurance, Contractor Requirements Document, the LBNL Operating and Assurance Program Plan (OAP), and other applicable environmental compliance documents. The QAP and all associated WMG policies and procedures are periodically reviewed and revised, as necessary, to implement corrective actions, and to reflect changes that have occurred in regulations, requirements, or practices as a result of feedback on work performed or lessons learned from other organizations. The provisions of this QAP and its implementing documents apply to quality-affecting activities performed by the WMG; WMG personnel, contractors, and vendors; and personnel from other associated LBNL organizations, except where such contractors, vendors, or organizations are governed by their own WMG-approved QA programs.

  1. Quality Assurance Made Easy.

    ERIC Educational Resources Information Center

    Villemaire, Lorry

    Designed to help adult learners realize the importance and necessity of implementing continuous quality improvement (CQI) in a rapidly changing, competitive, and modern world of work, this document presents a comprehensive explanation of CQI. The following topics are discussed in the book's introduction and seven chapters: importance of quality in…

  2. Quality assurance for environmental analytical chemistry: 1980

    SciTech Connect

    Gladney, E.S.; Goode, W.E.; Perrin, D.R.; Burns, C.E.

    1981-09-01

    The continuing quality assurance effort by the Environmental Surveillance Group is presented. Included are all standard materials now in use, their consensus or certified concentrations, quality control charts, and all quality assurance measurements made by H-8 during 1980.

  3. Process chemistry {ampersand} statistics quality assurance plan

    SciTech Connect

    Meznarich, H.K.

    1996-08-01

    This document provides quality assurance guidelines and quality control requirements for Process Chemistry and Statistics. This document is designed on the basis of Hanford Analytical Services Quality Assurance Plan (HASQAP) technical guidelines and is used for governing process chemistry activities.

  4. Quality Assurance: One School's Response.

    ERIC Educational Resources Information Center

    Wittemann, K. Joseph

    1990-01-01

    Since 1987, the Virginia Commonwealth University School of Dentistry has established a system of committee responsibilities for quality assurance, involving the committees for clinical affairs, academic performance, safety and therapeutics, and a council composed largely of department chairs. Additional review of procedures and records management…

  5. Assuring Quality in Collaborative Provision.

    ERIC Educational Resources Information Center

    Bocock, Jean; Edwards, Judith

    1998-01-01

    This bulletin is intended to help British further education colleges clarify their rationale for entering into collaborative programs, assess prospective partners, define and implement good practice at all stages of provision, and establish rigorous quality assurance procedures. Following an introduction, Further Education Funding Council…

  6. Quality Assurance Program. QAP Workbook.

    ERIC Educational Resources Information Center

    Pelavin Research Inst., Washington, DC.

    The Quality Assurance Program (QAP) workbook is intended to assist institutions of higher education conduct qualitative and quantitative evaluations of their financial aid operations in relation to requirements of Title IV of the Higher Education Act. The workbook provides a structured approach for incorporating a cyclical Title IV QA system into…

  7. Employer-Led Quality Assurance

    ERIC Educational Resources Information Center

    Tyszko, Jason A.

    2017-01-01

    Recent criticism of higher education accreditation has prompted calls for reform and sparked interest in piloting alternative quality assurance methods that better address student learning and employment outcomes. Although this debate has brought much needed attention to improving the outcomes of graduates and safeguarding federal investment in…

  8. Quality assurance: Importance of systems and standard operating procedures.

    PubMed

    Manghani, Kishu

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

  9. Quality assurance: Importance of systems and standard operating procedures

    PubMed Central

    Manghani, Kishu

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company. PMID:21584180

  10. Monitoring maternal, newborn, and child health interventions using lot quality assurance sampling in Sokoto State of northern Nigeria

    PubMed Central

    Abegunde, Dele; Orobaton, Nosa; Shoretire, Kamil; Ibrahim, Mohammed; Mohammed, Zainab; Abdulazeez, Jumare; Gwamzhi, Ringpon; Ganiyu, Akeem

    2015-01-01

    Background Maternal mortality ratio and infant mortality rate are as high as 1,576 per 100,000 live births and 78 per 1,000 live births, respectively, in Nigeria's northwestern region, where Sokoto State is located. Using applicable monitoring indicators for tracking progress in the UN/WHO framework on continuum of maternal, newborn, and child health care, this study evaluated the progress of Sokoto toward achieving the Millennium Development Goals (MDGs) 4 and 5 by December 2015. The changes in outcomes in 2012–2013 associated with maternal and child health interventions were assessed. Design We used baseline and follow-up lot quality assurance sampling (LQAS) data obtained in 2012 and 2013, respectively. In each of the surveys, data were obtained from 437 households sampled from 19 LQAS locations in each of the 23 local government areas (LGAs). The composite state-level coverage estimates of the respective indicators were aggregated from estimated LGA coverage estimates. Results None of the nine indicators associated with the continuum of maternal, neonatal, and child care satisfied the recommended 90% coverage target for achieving MDGs 4 and 5. Similarly, the average state coverage estimates were lower than national coverage estimates. Marginal improvements in coverage were obtained in the demand for family planning satisfied, antenatal care visits, postnatal care for mothers, and exclusive breast-feeding. Antibiotic treatment for acute pneumonia increased significantly by 12.8 percentage points. The majority of the LGAs were classifiable as low-performing, high-priority areas for intensified program intervention. Conclusions Despite the limited time left in the countdown to December 2015, Sokoto State, Nigeria, is not on track to achieving the MDG 90% coverage of indicators tied to the continuum of maternal and child care, to reduce maternal and childhood mortality by a third by 2015. Targeted health system investments at the primary care level remain a

  11. Quality Assurance and Quality Control, Part 1.

    PubMed

    Akers, Michael J

    2015-01-01

    The tragedy surrounding the New England Compounding Center and contaminated steroid syringe preparations clearly points out what can happen if quality-assurance and quality-control procedures are not strictly practiced in the compounding of sterile preparations. This article represents part 1 of a 2-part article on quality-assurance and quality-control procedures and serves as an introduction to the topic of finished preparation release checks and tests. Part 1 highlights what is required to comply with United States Pharmacopeia General Chapter <797>, and part 2 continues with a discussion on the requirements of <797> as well as what is required in chapter < 1163> with respect to quality assurance of compounded sterile preparations. Written procedures, good documentation practices, and specific details for clarity, sterility, and bacterial endotoxin (pyrogen) testing are presented in this article.

  12. Waste Management Quality Assurance Plan

    SciTech Connect

    Not Available

    1993-11-30

    Lawrence Berkeley Laboratory`s Environment Department addresses its responsibilities through activities in a variety of areas. The need for a comprehensive management control system for these activities has been identified by the Department of Energy (DOE). The WM QA (Waste Management Quality Assurance) Plan is an integral part of a management system that provides controls necessary to ensure that the department`s activities are planned, performed, documented, and verified. This WM QA Plan defines the requirements of the WM QA program. These requirements are derived from DOE Order 5700.6C, Quality Assurance, the LBL Operating and Assurance Program Plan (OAP, LBL PUB-3111), and other environmental compliance documents applicable to WM activities. The requirements presented herein, as well as the procedures and methodologies that direct the implementation of these requirements, will undergo review and revisions as necessary. The provisions of this QA Plan and its implementing documents apply to quality-affecting activities performed by and for WM. It is also applicable to WM contractors, vendors, and other LBL organizations associated with WM activities, except where such contractors, vendors, or organizations are governed by their own WM-approved QA programs. References used in the preparation of this document are (1) ASME NQA-1-1989, (2) ANSI/ASQC E4 (Draft), (3) Waste Management Quality Assurance Implementing Management Plan (LBL PUB-5352, Rev. 1), (4) LBL Operating and Assurance Program Plan (OAP), LBL PUB-3111, 2/3/93. A list of terms and definitions used throughout this document is included as Appendix A.

  13. Lot quality assurance sampling for monitoring coverage and quality of a targeted condom social marketing programme in traditional and non-traditional outlets in India

    PubMed Central

    Piot, Bram; Navin, Deepa; Krishnan, Nattu; Bhardwaj, Ashish; Sharma, Vivek; Marjara, Pritpal

    2010-01-01

    Objectives This study reports on the results of a large-scale targeted condom social marketing campaign in and around areas where female sex workers are present. The paper also describes the method that was used for the routine monitoring of condom availability in these sites. Methods The lot quality assurance sampling (LQAS) method was used for the assessment of the geographical coverage and quality of coverage of condoms in target areas in four states and along selected national highways in India, as part of Avahan, the India AIDS initiative. Results A significant general increase in condom availability was observed in the intervention area between 2005 and 2008. High coverage rates were gradually achieved through an extensive network of pharmacies and particularly of non-traditional outlets, whereas traditional outlets were instrumental in providing large volumes of condoms. Conclusion LQAS is seen as a valuable tool for the routine monitoring of the geographical coverage and of the quality of delivery systems of condoms and of health products and services in general. With a relatively small sample size, easy data collection procedures and simple analytical methods, it was possible to inform decision-makers regularly on progress towards coverage targets. PMID:20167732

  14. Lot quality assurance sampling for monitoring coverage and quality of a targeted condom social marketing programme in traditional and non-traditional outlets in India.

    PubMed

    Piot, Bram; Mukherjee, Amajit; Navin, Deepa; Krishnan, Nattu; Bhardwaj, Ashish; Sharma, Vivek; Marjara, Pritpal

    2010-02-01

    This study reports on the results of a large-scale targeted condom social marketing campaign in and around areas where female sex workers are present. The paper also describes the method that was used for the routine monitoring of condom availability in these sites. The lot quality assurance sampling (LQAS) method was used for the assessment of the geographical coverage and quality of coverage of condoms in target areas in four states and along selected national highways in India, as part of Avahan, the India AIDS initiative. A significant general increase in condom availability was observed in the intervention area between 2005 and 2008. High coverage rates were gradually achieved through an extensive network of pharmacies and particularly of non-traditional outlets, whereas traditional outlets were instrumental in providing large volumes of condoms. LQAS is seen as a valuable tool for the routine monitoring of the geographical coverage and of the quality of delivery systems of condoms and of health products and services in general. With a relatively small sample size, easy data collection procedures and simple analytical methods, it was possible to inform decision-makers regularly on progress towards coverage targets.

  15. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Quality assurance and quality control. 26.137 Section 26....137 Quality assurance and quality control. (a) Quality assurance program. Each licensee testing facility shall have a quality assurance program that encompasses all aspects of the testing process...

  16. 40 CFR 75.21 - Quality assurance and quality control requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Quality assurance and quality control... PROGRAMS (CONTINUED) CONTINUOUS EMISSION MONITORING Operation and Maintenance Requirements § 75.21 Quality assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner...

  17. Update on compliance assurance monitoring

    SciTech Connect

    Freeman, L.E.

    1997-12-31

    In August, 1996, EPA released a revised draft of its proposal for a Compliance Assurance Monitoring (CAM) program. The proposal, which is intended to replace the Agency`s highly controversial 1993 proposal for {open_quotes}enhanced monitoring,{close_quotes} must be finalized by mid-1997 under court order. Many had hopes that EPA`s CAM proposal, by focussing on proper operation and maintenance of required control technologies rather than enforcement of numerical emission limitations, would provide a neutral resolution of issues associated with use of continuous compliance methods to enforce standards that were developed using limited, periodic data (and are currently enforceable with periodic stack tests). However, with this second draft of the CAM rule continuing to draw criticism from both industry (primarily for its effect on existing compliance obligations) and environmental groups (in part, for not requiring direct measurement of emissions), EPA appears to be a long way from reaching that goal. In the meantime, sources and states continue to work to meet deadlines for submission of applications and for issuance of Title V operating permits that must address issues currently being debated in the CAM rulemaking.

  18. Quality assurance in forensic pathology.

    PubMed

    Ong, Beng Beng; Milne, Nathan

    2009-06-01

    One of the requirements for proper running of a pathology laboratory is implementation of a quality assurance programme. Forensic pathology is not exempted, especially so when cases are increasing in complexity. It is not difficult to introduce a quality assurance programme even in a small forensic centre. Among the steps that can be implemented including introduction of a set of minimal standards in performance of the autopsy, timeliness and report writing, a vigorous peer review process either internally or externally and participation in external quality programmes. Proper documentation of the post-mortem process (photography, slides and blocks and various imaging modalities) is to be encouraged. There should be limits set on workload of pathologists as overburden is known to lower standards. A pleasant work environment is also essential. Personal continuous medical education should be made mandatory. Introduction of a quality assurance programme will not only improve standards but minimise possible negligence. The post-mortem reports will be seen to carry more weight in court.

  19. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  20. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  1. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  2. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  3. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  4. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Quality assurance. 194.22 Section 194... General Requirements § 194.22 Quality assurance. (a)(1) As soon as practicable after April 9, 1996, the Department shall adhere to a quality assurance program that implements the requirements of ASME...

  5. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Quality assurance. 194.22 Section 194... General Requirements § 194.22 Quality assurance. (a)(1) As soon as practicable after April 9, 1996, the Department shall adhere to a quality assurance program that implements the requirements of ASME...

  6. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Quality assurance. 31.45 Section 31.45... Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's project... quality assurance practices consisting of policies, procedures, specifications, standards,...

  7. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Quality assurance. 31.45 Section 31.45... Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's project... quality assurance practices consisting of policies, procedures, specifications, standards,...

  8. 40 CFR 30.54 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Quality assurance. 30.54 Section 30.54... NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 30.54 Quality assurance. If the... data generation, the grantee shall develop and implement quality assurance practices consisting...

  9. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Quality assurance. 31.45 Section 31.45... Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's project... quality assurance practices consisting of policies, procedures, specifications, standards,...

  10. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Quality assurance. 194.22 Section 194... General Requirements § 194.22 Quality assurance. (a)(1) As soon as practicable after April 9, 1996, the Department shall adhere to a quality assurance program that implements the requirements of ASME...

  11. 40 CFR 30.54 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Quality assurance. 30.54 Section 30.54... NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 30.54 Quality assurance. If the... data generation, the grantee shall develop and implement quality assurance practices consisting...

  12. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Quality assurance. 194.22 Section 194... General Requirements § 194.22 Quality assurance. (a)(1) As soon as practicable after April 9, 1996, the Department shall adhere to a quality assurance program that implements the requirements of ASME...

  13. 40 CFR 30.54 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Quality assurance. 30.54 Section 30.54... NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 30.54 Quality assurance. If the... data generation, the grantee shall develop and implement quality assurance practices consisting...

  14. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Quality assurance. 194.22 Section 194... General Requirements § 194.22 Quality assurance. (a)(1) As soon as practicable after April 9, 1996, the Department shall adhere to a quality assurance program that implements the requirements of ASME...

  15. Beef Quality Assurance in Feedlots.

    PubMed

    Smith, Robert A; Thomson, Daniel U; Lee, Tiffany L

    2015-07-01

    This article discusses the Beef Quality Assurance (BQA) program, which was created by beef producers and veterinarians. The program has evolved from antibiotic residue avoidance to include animal handling, cattle comfort, food safety, and much more. It provides guidance to producers and veterinarians on best management practices and allows the beef industry to be transparent about the practices used. Veterinarians are key to helping producers implement BQA in their beef operations.

  16. Quality Assurance in Post-Secondary Education: Some Common Approaches

    ERIC Educational Resources Information Center

    Law, Dennis Chung Sea

    2010-01-01

    Purpose: The common approaches to quality assurance (QA), as practiced by most post-secondary education institutions for internal quality monitoring and most QA authorities for external quality monitoring (EQM), have been considered by many researchers as having largely failed to address the essence of educational quality. The purpose of this…

  17. Quality Assurance in Post-Secondary Education: Some Common Approaches

    ERIC Educational Resources Information Center

    Law, Dennis Chung Sea

    2010-01-01

    Purpose: The common approaches to quality assurance (QA), as practiced by most post-secondary education institutions for internal quality monitoring and most QA authorities for external quality monitoring (EQM), have been considered by many researchers as having largely failed to address the essence of educational quality. The purpose of this…

  18. Quality assurance plan for the data acquisition and management system for monitoring the fuel oil spill at the Sandia National Laboratories installation in Livermore, California

    SciTech Connect

    Peerenboom, J.P.; Leser, C.C.; Ramsey, G.M.; Widing, M.A.

    1995-04-01

    In February 1975, the accidental puncture of an underground transfer line buried about 4 ft below the ground surface at the SNL installation in Livermore, California, resulted in the release of approximately 225.5 m{sup 3} of No. 2 diesel fuel. This report describes the formal quality assurance plan that will be used for the data acquisition and management system developed to monitor a bioremediation pilot study by Argonne National Laboratory in association with Sandia National Laboratories. The data acquisition and management system will record the site data during the bioremediation effort and assist users in site analysis. The designs of the three major subsystems of this system are described in this report. Quality assurance criteria are defined for the management, performance, and assessment of the system. Finally, the roles and responsibilities for configuration management of this system are defined for the entire life cycle of the project.

  19. Quality assurance in gastrointestinal endoscopy: An Egyptian experience.

    PubMed

    Gado, Ahmed S; Ebeid, Basel A; Axon, Anthony T

    2016-12-01

    Over the last four decades, gastrointestinal endoscopy has become of paramount importance to diagnose, treat and prevent diseases of the digestive tract. Practice variation, however, is likely to have an important effect on the effectiveness of endoscopy and can impair the delivery of high-quality endoscopic procedures. There have been increasing demands to assess the quality of service and track and improve patient outcomes. Quality assurance has paved its way into professional guidelines for physicians. Developing a modern endoscopy unit demands the institution of a quality assurance programme, continuous training and monitoring of service delivery. This article describes our experience in implementing a quality assurance programme in endoscopy in a secondary care government hospital in Egypt. The implementation of quality assurance and improvement programme can lead to dramatic improvements in the quality of endoscopic care and patient outcomes. Quality assurance and continual improvement can be applied in developing countries.

  20. Role of Informatics in Patient Safety and Quality Assurance.

    PubMed

    Nakhleh, Raouf E

    2015-06-01

    Quality assurance encompasses monitoring daily processes for accurate, timely, and complete reports in surgical pathology. Quality assurance also includes implementation of policies and procedures that prevent or detect errors in a timely manner. This article presents uses of informatics in quality assurance. Three main foci are critical to the general improvement of diagnostic surgical pathology. First is the application of informatics to specimen identification with lean methods for real-time statistical control of specimen receipt and processing. Second is the development of case reviews before sign-out. Third is the development of information technology in communication of results to assure treatment in a timely manner.

  1. Quality assurance program plan for Building 327

    SciTech Connect

    Tanke, J.M.

    1997-05-22

    This Quality Assurance Program Plan (QAPP) provides an overview of the quality assurance program for Building 327. The program applies to the facility safety structures, systems, and components and to activities that could affect safety structures, systems, and components. Adherence to the quality assurance program ensures the following: US Department of Energy missions and objectives are effectively accomplished; Products and services are safe, reliable, and meet or exceed the requirements and expectations of the user; Hazards to the public, to Hanford Site and facility workers, and to the environment are minimized. The format of this Quality Assurance Program Plan is structured to parallel that of 10 CFR 83 0.120, Quality Assurance Requirements. This Quality Assurance Program Plan (QAPP) provides information on how the Quality Assurance Program is implemented for the 324 Building B-Cell Safety Cleanout Project (BCCP). This QAPP is responsive to the Westinghouse Hanford Company Quality Assurance Program and Implementation Plan, WHC-SP 113 1, for 10 CFR 830.120, Nuclear Safety Management, Quality Assurance Requirements; and DOE Order 5700.6C, Quality Assurance. This QAPP supersedes PNNL PNL-MA-70 QAP Quality Assurance Plan No. WTC-050 Rev. 2, issue date May 3, 1996.

  2. 40 CFR Appendix A to Part 58 - Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (described in section 3.2.2 of this appendix) for PSD must be conducted by personnel different from those who... monitoring, the level of data quality needed, the expertise of assigned personnel, the cost of control... Administrator, or his or her representative. The quality system will be reviewed during the systems audits...

  3. Quality assurance standards for purchasing and inventory control.

    PubMed

    Soares, D P

    1985-03-01

    A process is described for quality assurance in pharmaceutical purchasing and inventory control. A quality assurance program should ensure that quality drugs are purchased at the lowest price, drug products are available when needed, the system is managed efficiently, internal controls are provided, drug products are stored under appropriate conditions, and laws, regulations, accreditation standards, and procedures are followed. To meet these objectives, product quality, vendor performance, the department's system of internal controls, purchasing data, and storage conditions should be monitored. A checklist for evaluating purchasing and inventory practices and a sample audit form listing quality assurance criteria, standards, procedures, and recommended actions are provided. A quality assurance program for pharmaceutical purchasing and inventory control should define institution-specific criteria and standards and use these standards for continual evaluation of all aspects of the purchasing and inventory control system. Documentation of quality assurance activities should be provided for use by the purchasing department, hospital administration, and regulatory bodies.

  4. 48 CFR 246.470 - Government contract quality assurance actions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... quality assurance actions. 246.470 Section 246.470 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.470 Government contract quality assurance actions....

  5. Quality Assurance Specifications for Planetary Protection Assays

    NASA Astrophysics Data System (ADS)

    Baker, Amy

    As the European Space Agency planetary protection (PP) activities move forward to support the ExoMars and other planetary missions, it will become necessary to increase staffing of labo-ratories that provide analyses for these programs. Standardization of procedures, a comprehen-sive quality assurance program, and unilateral training of personnel will be necessary to ensure that the planetary protection goals and schedules are met. The PP Quality Assurance/Quality Control (QAQC) program is designed to regulate and monitor procedures performed by labora-tory personnel to ensure that all work meets data quality objectives through the assembly and launch process. Because personnel time is at a premium and sampling schedules are often de-pendent on engineering schedules, it is necessary to have flexible staffing to support all sampling requirements. The most productive approach to having a competent and flexible work force is to establish well defined laboratory procedures and training programs that clearly address the needs of the program and the work force. The quality assurance specification for planetary protection assays has to ensure that labora-tories and associated personnel can demonstrate the competence to perform assays according to the applicable standard AD4. Detailed subjects included in the presentation are as follows: • field and laboratory control criteria • data reporting • personnel training requirements and certification • laboratory audit criteria. Based upon RD2 for primary and secondary validation and RD3 for data quality objectives, the QAQC will provide traceable quality assurance safeguards by providing structured laboratory requirements for guidelines and oversight including training and technical updates, standardized documentation, standardized QA/QC checks, data review and data archiving.

  6. Annual Quality Assurance Conference Presentations by Johnathan Beck

    EPA Pesticide Factsheets

    25th Annual Quality Assurance Conference Presentation: Disinfectants/Disinfection Byproducts –Rules and Requirements and Presentation: Long Term 2 Enhanced Surface Water Treatment Rule (LT2) Cryptosporidium Monitoring

  7. Annual Quality Assurance Conference Files by Tom Mancuso

    EPA Pesticide Factsheets

    25th Annual Quality Assurance Conference. Abstract: Learn about the NEW EPA Method 325b for Refinery Fence Line Monitoring and TO-17 Extended for Soil Gas by Tom Mancuso and Abstract: Success Using Alternate Carrier Gases for Volatile Methods

  8. Quality Assurance for Clinical Trials

    PubMed Central

    Ibbott, Geoffrey S.; Haworth, Annette; Followill, David S.

    2013-01-01

    Cooperative groups, of which the Radiation Therapy Oncology Group is one example, conduct national clinical trials that often involve the use of radiation therapy. In preparation for such a trial, the cooperative group prepares a protocol to define the goals of the trial, the rationale for its design, and the details of the treatment procedure to be followed. The Radiological Physics Center (RPC) is one of several quality assurance (QA) offices that is charged with assuring that participating institutions deliver doses that are clinically consistent and comparable. The RPC does this by conducting a variety of independent audits and credentialing processes. The RPC has compiled data showing that credentialing can help institutions comply with the requirements of a cooperative group clinical protocol. Phantom irradiations have been demonstrated to exercise an institution’s procedures for planning and delivering advanced external beam techniques (1–3). Similarly, RPC data indicate that a rapid review of patient treatment records or planning procedures can improve compliance with clinical trials (4). The experiences of the RPC are presented as examples of the contributions that a national clinical trials QA center can make to cooperative group trials. These experiences illustrate the critical need for comprehensive QA to assure that clinical trials are successful and cost-effective. The RPC is supported by grants CA 10953 and CA 81647 from the National Cancer Institute, NIH, DHHS. PMID:24392352

  9. EPA Quality Assurance Policy Statement

    EPA Pesticide Factsheets

    This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

  10. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Quality assurance and quality control. 26.167 Section 26... Department of Health and Human Services § 26.167 Quality assurance and quality control. (a) Quality assurance... calibrators and controls. (c) Quality control requirements for performing initial and confirmatory...

  11. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Quality assurance and quality control. 26.137 Section 26....137 Quality assurance and quality control. (a) Quality assurance program. Each licensee testing... metabolites. (b) Performance testing and quality control requirements for validity screening tests....

  12. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Quality assurance and quality control. 26.167 Section 26... Department of Health and Human Services § 26.167 Quality assurance and quality control. (a) Quality assurance... calibrators and controls. (c) Quality control requirements for performing initial and confirmatory...

  13. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Quality assurance and quality control. 26.137 Section 26....137 Quality assurance and quality control. (a) Quality assurance program. Each licensee testing... metabolites. (b) Performance testing and quality control requirements for validity screening tests....

  14. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Quality assurance and quality control. 26.167 Section 26... Department of Health and Human Services § 26.167 Quality assurance and quality control. (a) Quality assurance... calibrators and controls. (c) Quality control requirements for performing initial and confirmatory...

  15. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Quality assurance and quality control. 26.137 Section 26....137 Quality assurance and quality control. (a) Quality assurance program. Each licensee testing... metabolites. (b) Performance testing and quality control requirements for validity screening tests....

  16. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Quality assurance and quality control. 26.167 Section 26... Department of Health and Human Services § 26.167 Quality assurance and quality control. (a) Quality assurance... calibrators and controls. (c) Quality control requirements for performing initial and confirmatory...

  17. Quality assurance and quality control in clinical cytogenetics.

    PubMed

    Mikhail, Fady M; Watson, Michael S

    2014-07-14

    The goal of any clinical laboratory should be to provide patients with the most accurate test results possible. This is accomplished through various overlapping programs that continuously monitor and optimize all aspects of a test, including decisions by the laboratory to offer a test, the decision of providers to request the test, the testing itself, and the reporting of results to the referral source and patient. The levels at which test performance and accuracy can be optimized are encompassed under quality control (QC) and quality assurance (QA). The monitoring of QC and QA problems allows for the integration of these parameters into a total quality management program. This unit reviews QC and QA guidelines, in addition to discussing how to establish a quality assurance program.

  18. Quality Assurance: Patient Chart Reviews

    NASA Astrophysics Data System (ADS)

    Oginni, B. M.; Odero, D. O.

    2009-07-01

    Recent developments in radiation therapy have immensely impacted the way the radiation dose is delivered to patients undergoing radiation treatments. However, the fundamental quality assurance (QA) issues underlying the radiation therapy still remain the accuracy of the radiation dose and the radiation safety. One of the major duties of clinical medical physicists in the radiation therapy departments still revolves around ensuring the accuracy of dose delivery to the planning target volume (PTV), the reduction of unintended radiation to normal organs and minimization of the radiation exposure to the medical personnel based on ALARA (as low as reasonably achievable) principle. Many of the errors in radiation therapy can be minimized through a comprehensive program of periodic checks. One of the QA procedures on the patient comes in the form of chart reviews which could be in either electronic or paper-based format. We present the quality assurance procedures that have to be performed on the patient records from the beginning and periodically to the end of the treatment, based on the guidelines from the American Association of Physicists in Medicine (AAPM) and American College of Physicians (ACP).

  19. Quality Assurance: Patient Chart Reviews

    SciTech Connect

    Oginni, B. M.; Odero, D. O.

    2009-07-06

    Recent developments in radiation therapy have immensely impacted the way the radiation dose is delivered to patients undergoing radiation treatments. However, the fundamental quality assurance (QA) issues underlying the radiation therapy still remain the accuracy of the radiation dose and the radiation safety. One of the major duties of clinical medical physicists in the radiation therapy departments still revolves around ensuring the accuracy of dose delivery to the planning target volume (PTV), the reduction of unintended radiation to normal organs and minimization of the radiation exposure to the medical personnel based on ALARA (as low as reasonably achievable) principle. Many of the errors in radiation therapy can be minimized through a comprehensive program of periodic checks. One of the QA procedures on the patient comes in the form of chart reviews which could be in either electronic or paper-based format. We present the quality assurance procedures that have to be performed on the patient records from the beginning and periodically to the end of the treatment, based on the guidelines from the American Association of Physicists in Medicine (AAPM) and American College of Physicians (ACP)

  20. Importance of a quality assurance scheme for factor VIII assays in quality monitoring of human plasma destined for fractionation into factor VIII concentrate.

    PubMed

    Gabra, G S; Prowse, C V; Boulton, F E

    1989-01-01

    A national quality assurance scheme has been established to monitor the validity of factor VIII assays performed by the various laboratories of the Scottish National Blood Transfusion Service engaged in collection and processing of donor plasma destined for fractionation. The results over the first 3-year period show that comparable assay values can be obtained by participating centres using a common standard, despite differences in equipment, methods or substrate chosen for the one-stage assay. The results also showed that chromogenic factor VIII assays correlated well with the one-stage method. Random factor VIII assays performed on plasma, harvested and frozen within 18 h from collection, were analysed to validate recently proposed Scottish specifications which stipulate that 70% of plasma donations destined for fractionation should contain at least 0.7 IU/ml. Plasma harvested and frozen between 8 and 18 h from collection did not meet the specified level in any of the regional centres. This nationally specified level was also not met by plasma harvested and frozen within 8 h from collection in spite of being achieved individually by three regional centres. Assays performed on large plasma pools at the Fractionation Centre suggested loss of some factor VIII during storage, transportation and thawing of plasma prior to bulk processing.

  1. Pilot quality assurance programme for plasma metanephrines.

    PubMed

    Pillai, Dilo; Callen, Shaw

    2010-03-01

    Up to 2007 there was no formal external quality assurance programme for plasma free metanephrines. A pilot programme was conceived by the AACB (Australian Association of Clinical Biochemists) Working Party on biogenic amines. With support from the AACB and Royal College of Pathologists of Australasia Quality Assurance programmes, a pilot study was developed. Data from this study are presented for the first time. Twelve lyophilized plasma samples were distributed to 15 centres. Samples were spiked with metanephrine (metadrenaline), normetanephrine (normetadrenaline) and 3-methoxytyramine, all derived from human urine. Concentrations were arranged in a linear relationship. The analytes were present at six levels and samples were duplicated. High-pressure liquid chromatography and tandem mass spectrometry methods showed acceptable precision but in general enzyme immunoassay displayed a higher degree of imprecision as well as a negative bias. Differences in calibration and matrix effects are likely to have been responsible for the discrepancy between chromatographic and immunoassay methods. These differences need to be further examined although efforts at standardization between different methods have been hampered by the lack of a universal calibrator for plasma metanephrines. Meanwhile, a laboratory's performance characteristics can be monitored and enhanced by participation in suitable external quality assurance programmes.

  2. Quality assurance tests for digital radiography in general dental practice.

    PubMed

    Greenall, Chris; Drage, Nicholas; Ager, Matthew

    2014-03-01

    Quality assurance (QA) is essential in dental radiography. Digital radiography is becoming more common in dentistry, so it is important that appropriate QA tests are carried out on the digital equipment, including the viewing monitor. The aim of this article is to outline the tests that can be carried out in dental practice. Quality assurance for digital equipment is important to ensure consistently high quality images are produced.

  3. Quality assurance monitoring of a citywide transportation protocol improves clinical indicators of intravenous tissue plasminogen activator therapy: a community-based, longitudinal study.

    PubMed

    Atsumi, Chihiro; Hasegawa, Yasuhiro; Tsumura, Kohtaro; Ueda, Toshihiro; Suzuki, Kazunari; Sugiyama, Makoto; Nozaki, Hiroyuki; Suzuki, Shinichi; Nakane, Makoto; Nagashima, Goro; Kitamura, Takayuki; Nikaido, Hirofumi; Sasanuma, Jinichi

    2015-01-01

    Stroke-bypass transportation to the stroke center by paramedics is important to maximize the efficiency of intravenous tissue plasminogen activator (iv-tPA) therapy. To improve access to stroke thrombolysis, a citywide protocol was launched on January 2007 in Kawasaki City (population 1.4 million) using the Maria Prehospital Stroke Scale (MPSS), and quality assurance monitoring has been performed every 6 months. The aim was to identify whether the citywide quality assurance monitoring improves the process and outcome of iv-tPA therapy. All of the MPSS-based transportation data prospectively recorded by the Kawasaki City Fire Department and the associated clinical data in the 11 hospitals that accept stroke-bypass transfers were merged every 6 months for the quality assurance monitoring. Clinical indicators such as ambulance call-to-door time, onset-to-needle time, door-to-needle time, frequency of thrombolytic use, and outcome of thrombolytic therapy were analyzed. These clinical indicators were also compared between patients transferred on weekdays and on weekends. A total of 2049 patients was registered from April 2009 to March 2013. Their mean age was 70.4 ± 13.2 (range, 24-98) years, and 64.3% were male. Ambulance call-to-door time decreased gradually from 37.5 ± 12.5 minutes to 33.9 ± 11.7 minutes over 4 years (P = .000, analysis of variance with the post hoc Dunnett test). Onset-to-needle time and door-to-needle time were similar over the 4 years. Good outcome (modified Rankin Scale score <2) after iv-tPA therapy increased from 24.1% to 35.3% (P = .045, 2010 vs. 2012). No deleterious effect of weekend admission was observed based on these clinical indicators. A citywide MPSS-based transportation protocol significantly decreased the delay in the ambulance call-to-door time. The implementation of standardized cross-institutional quality assurance programs for acute stroke therapy may improve the process and outcome of iv-tPA therapy in the community

  4. Nuclear Technology. Course 31: Quality Assurance Practices. Module 31-1, Overall Quality Assurance Program.

    ERIC Educational Resources Information Center

    Espy, John

    This first in a series of eight modules for a course titled Quality Assurance Practices describes responsibilities for quality assurance, identified how quality assurance requirements are passed on to other organizations, defines the three phases of activities of the plant, and reviews the eighteen criteria applicable to the quality assurance…

  5. Quality assurance program plan fuel supply shutdown

    SciTech Connect

    Metcalf, I.L.

    1998-09-21

    This Quality Assurance Program plan (QAPP) describes how the Fuel Supply Shutdown (FSS) project organization implements the quality assurance requirements of HNF-MP-599, Project Hanford Quality Assurance Program Description (QAPD) and the B and W Hanford Company Quality Assurance Program Plan (QAPP), FSP-MP-004. The QAPP applies to facility structures, systems, and components and to activities (e.g., design, procurement, testing, operations, maintenance, etc.) that could affect structures, systems, and components. This QAPP also provides a roadmap of applicable Project Hanford Policies and Procedures (PHPP) which may be utilized by the FSS project organization to implement the requirements of this QAPP.

  6. Quality Assurance in Chinese Higher Education

    ERIC Educational Resources Information Center

    Li, Yuan

    2010-01-01

    Quality assurance has been integrated into the fabric of higher education in China, with the issue of quality in higher education--how to evaluate it and how to enhance it--now taking centre stage in Chinese higher education. In the past decade, the development of quality assurance in Chinese higher education has covered a broad spectrum of…

  7. 40 CFR 75.45 - Daily quality assurance criteria.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Daily quality assurance criteria. 75.45 Section 75.45 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTINUOUS EMISSION MONITORING Alternative Monitoring Systems § 75.45 Daily quality...

  8. References on EPA Quality Assurance Project Plans

    EPA Pesticide Factsheets

    Provides requirements for the conduct of quality management practices, including quality assurance (QA) and quality control (QC) activities, for all environmental data collection and environmental technology programs performed by or for this Agency.

  9. Quality assurance from a manufacturer's standpoint

    NASA Astrophysics Data System (ADS)

    Anderson, William J.

    1991-05-01

    The efforts of a manufacturer in the area of component procurement acceptance testing are very visible, while the quality assurance work that goes on during the design and manufacture of medical imaging equipment is frequently not so apparent. Many steps in the design and production of imaging devices are carefully designed to promote not only quality of the devices when initially installed, but also the ability to maintain the device''s quality over a period of time. Customer requirements for aesthetics, performance, safety and regulatory compliance must be considered. Software, which represents over 70 of the design engineering of modern products, presents a special challenge since the quality of software cannot be tested and must be designed in. Specific hardware elements such as monitor phosphor color and uniformity deserve extra consideration. A design that allows quick diagnosis and replacement of failed components is also important.

  10. Journal Article: Quality Assurance Considerations for An ...

    EPA Pesticide Factsheets

    The U.S. Environmental Protection Agency initiated the National Dioxin Air Monitoring Network (NDAMN) in 1998. NDAMN has three primary purposes: 1. To provide measurements of background atmospheric levels of dioxin-like compounds in different geographic regions of the United States; 2. To determine the the atmospheric levels of dixoin-like compounds in agricultural areas where livestock, poultry, and animal feed crops are grown; and 3. To provide data to evaluate results from long-range transport and deposition air models. At the end of 2001, 32 NDAMN sites were operational. This paper focuses on procedures implemented in NDAMN to assure quality and the results associated with such procedures.

  11. Quality assurance in postgraduate pathology training the Dutch way: regular assessment, monitoring of training programs but no end of training examination.

    PubMed

    van der Valk, Paul

    2016-01-01

    It might seem self-evident that in the transition from a supervised trainee to an independent professional who is no longer supervised, formal assessment of whether the trainee knows his/her trade well enough to function independently is necessary. This would then constitute an end of training examination. Such examinations are practiced in several countries but a rather heterogeneous situation exists in the EU countries. In the Netherlands, the training program is not concluded by a summative examination and reasons behind this situation are discussed. Quality assurance of postgraduate medical training in the Netherlands has been developed along two tracks: (1) not a single testing moment but continuous evaluation of the performance of the trainee in 'real time' situations and (2) monitoring of the quality of the offered training program through regular site-visits. Regular (monthly and/or yearly) evaluations should be part of every self-respecting training program. In the Netherlands, these evaluations are formative only: their intention is to provide the trainee a tool by which he or she can see whether they are on track with their training schedule. In the system in the Netherlands, regular site-visits to training programs constitute a crucial element of quality assurance of postgraduate training. During the site-visit, the position and perceptions of the trainee are key elements. The perception by the trainee of the training program, the institution (or department) offering the training program, and the professionals involved in the training program is explicitly solicited and systematically assessed. With this two-tiered approach high-quality postgraduate training is assured without the need for an end of training examination.

  12. [Quality and quality assurance, a European problem].

    PubMed

    Schmitt, H

    1994-01-01

    The problem of quality and quality assurance for the free exchange of blood and blood products in Europe is discussed. The background of all discussion of quality is the categorical theory of Aristoteles. The philosophical basis is described. The fundamental law of the daily work of a blood center has to be a philosophy of quality which depends on the sociodemographic situation in the region. This basic varies from country to country in Europe. The importance of the supranational bodies in Europe is mentioned. The weightness of the Code of Ethics is discussed. Virus safety, purity and validity of blood and blood products are described as parameters of the quality aspects. Finally it is confirmed that a well running blood program is a multicategorical problem.

  13. Triangle area water supply monitoring project, October 1988 through September 2001, North Carolina -- description of the water-quality network, sampling and analysis methods, and quality-assurance practices

    USGS Publications Warehouse

    Oblinger, Carolyn J.

    2004-01-01

    The Triangle Area Water Supply Monitoring Project was initiated in October 1988 to provide long-term water-quality data for six area water-supply reservoirs and their tributaries. In addition, the project provides data that can be used to determine the effectiveness of large-scale changes in water-resource management practices, document differences in water quality among water-supply types (large multiuse reservoir, small reservoir, run-of-river), and tributary-loading and in-lake data for water-quality modeling of Falls and Jordan Lakes. By September 2001, the project had progressed in four phases and included as many as 34 sites (in 1991). Most sites were sampled and analyzed by the U.S. Geological Survey. Some sites were already a part of the North Carolina Division of Water Quality statewide ambient water-quality monitoring network and were sampled by the Division of Water Quality. The network has provided data on streamflow, physical properties, and concentrations of nutrients, major ions, metals, trace elements, chlorophyll, total organic carbon, suspended sediment, and selected synthetic organic compounds. Project quality-assurance activities include written procedures for sample collection, record management and archive, collection of field quality-control samples (blank samples and replicate samples), and monitoring the quality of field supplies. In addition to project quality-assurance activities, the quality of laboratory analyses was assessed through laboratory quality-assurance practices and an independent laboratory quality-control assessment provided by the U.S. Geological Survey Branch of Quality Systems through the Blind Inorganic Sample Project and the Organic Blind Sample Project.

  14. Chesapeake Bay coordinated split sample program annual report, 1990-1991: Analytical methods and quality assurance workgroup of the Chesapeake Bay program monitoring subcommittee

    SciTech Connect

    Not Available

    1991-01-01

    The Chesapeake Bay Program is a federal-state partnership with a goal of restoring the Chesapeake Bay. Its ambient water quality monitoring programs, started in 1984, sample over 150 monitoring stations once or twice a month a month. Due to the size of the Bay watershed (64,000 square miles) and the cooperative nature of the CBP, these monitoring programs involve 10 different analytical laboratories. The Chesapeake Bay Coordinated Split Sample Program (CSSP), initialed in 1988, assesses the comparability of the water quality results from these laboratories. The report summarizes CSSP results for 1990 and 1991, its second and third full years of operation. The CSSP has two main objectives: identifying parameters with low inter-organization agreement, and estimating measurement system variability. The identification of parmeters with low agreement is used as part of the overall Quality Assurance program. Laboratory and program personnel use the information to investigate possible causes of the differences, and take action to increase agreement if possible. Later CSSP results will document any improvements in inter-organization agreement. The variability estimates are most useful to data analysts and modelers who need confidence estimates for monitoring data.

  15. FIELD DEMONSTRATION AND QUALITY ASSURANCE ...

    EPA Pesticide Factsheets

    The Demonstration of innovative field devices for the measurement of mercury in soil and sediment is being conducted under the EPA's SITE Program in February 2003 at the United States Department of Energy's (DOE) Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee and the Tennessee Department of Environment and Conservation's Department of Energy Oversight facility in Oak Ridge, Tennessee. The primary purpose of the Demonstration is to evaluate innovative field devices for the measurement of mercury in soil and sediment based on their performance and cost as compared to a conventional, off-site laboratory analytical method. The five field measurement devices listed below will be demonstrated: .Metorex's X-M ET 2000 Metal Master Analyzer, X-Ray Fluorescence Analyzer .Milestone Inc.'s Direct Mercury Analyzer (DMA-80), Thermal Decomposition Instrument.NITON's XL-700 Series Multi-Element Analyzer, X-Ray Fluorescence Analyzer .Ohio Lumex's RA-915+ Portable Mercury Analyzer, Atomic Absorption Spectrometer, Thermal Decompostion Attachment RP 91C .MTI, Inc.'s PDV 5000 Hand Held Instrument, Anodic Stripping Voltamm eter<1). This Demonstration Plan describes the procedures that will be used to verify the performance and cost of each field measurement device. The plan incorporates the quality assurance and quality control elements needed to generate data of sufficient quality to document each device's performance and cost. A separate Innovative Technology Verifica

  16. DEMONSTRATION AND QUALITY ASSURANCE PROJECT ...

    EPA Pesticide Factsheets

    A demonstration of field portable/mobile technologies for measuring trace elements in soil and sediments was conducted under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation (SITE) Program. The demonstration took place from January 24 to 28, 2005, at the Kennedy Athletic, Recreational and Social Park at Kennedy Space Center on Merritt Island, Florida. The purpose of the demonstration was to verify the performance of various instruments that employ X-ray fluorescence (XRF) measurement technologies for the determination of 13 toxic elements in a variety of soil and sediment samples. Instruments from the technology developers listed below were demonstrated. o Innov-X Systems, Inc.o NITON LLC (2 instruments ) o Oxford Instruments Portable Division (formerly Metorex, Inc.) .Oxford Instruments Analytical .Rigaku, Inc.o RONTEC USA Inc.o Xcalibur XRF Services Inc. (Division of Elvatech Ltd. ) This demonstration plan describes the procedures that will be used to verify the performance and cost of the XRF instruments provided by these technology developers. The plan incorporates the quality assurance and quality control elements needed to generate data of sufficient quality to perform this verification. A separate innovative technology verification report (ITVR) will be prepared for each instrument. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented perfor

  17. Quality assurance in film radiography

    SciTech Connect

    Van Bellegem, L.; Vaessen, B.

    1993-12-31

    The ISO 9000 standards were originally developed during the 1980`s to provide uniform, worldwide quality assurance requirements. The EC (European Communities) adopted these standards as part of their modular approach to ``conformity assessment`` procedures, for several product categories. This includes the development of standards (specifications) which define what the purchaser wants and what the supplier agrees to provide, as well as quality system registration (certification) which increases confidence in the supplier`s ability to produce consistently. The requirements are typically most rigorous for regulated products that have a major impact on health and safety i.e film radiographic systems. This is the main reason for making available the necessary Q.C. tools in film radiography to comply with Q.A. specifications and guarantee the required consistent performance. These tools can only give satisfying support if they are dedicated, easy to use, precise and cost effective at the user`s level. The main topics for such a Q.A. package are: (1) standard for Film System classification for industrial radiography; (2) film system certification; and (3) standard for control of film processing by means of reference values i.e. pre-exposed film wedges and archiving quality control method.

  18. Quality Assurance through ISO 9000.

    ERIC Educational Resources Information Center

    Zuckerman, Amy

    2000-01-01

    Created in 1987 by the International Organization for Standardization, in Geneva, Switzerland, ISO 9000 is attempting to develop a world standard to help companies and other institutions measure and monitor their quality-control efforts. This article describes four school districts' successful efforts to secure ISO 9000 certification. (MLH)

  19. Quality Assurance through ISO 9000.

    ERIC Educational Resources Information Center

    Zuckerman, Amy

    2000-01-01

    Created in 1987 by the International Organization for Standardization, in Geneva, Switzerland, ISO 9000 is attempting to develop a world standard to help companies and other institutions measure and monitor their quality-control efforts. This article describes four school districts' successful efforts to secure ISO 9000 certification. (MLH)

  20. Professionalism, Profession and Quality Assurance Practitioners in External Quality Assurance Agencies in Higher Education

    ERIC Educational Resources Information Center

    Cheung, Jordan C. M.

    2015-01-01

    This article seeks to spark a dialectic discussion on the establishment of a set of professional competencies for quality assurance practitioners who serve in external quality assurance agencies in higher education. Such a need is identified due to the shortage of relevant and sufficient coverage in the quality assurance literature. To…

  1. [Quality assurance in human genetic testing].

    PubMed

    Stuhrmann-Spangenberg, Manfred

    2015-02-01

    Advances in technical developments of genetic diagnostics for more than 50 years, as well as the fact that human genetic testing is usually performed only once in a lifetime, with additional impact for blood relatives, are determining the extraordinary importance of quality assurance in human genetic testing. Abidance of laws, directives, and guidelines plays a major role. This article aims to present the major laws, directives, and guidelines with respect to quality assurance of human genetic testing, paying careful attention to internal and external quality assurance. The information on quality assurance of human genetic testing was obtained through a web-based search of the web pages that are referred to in this article. Further information was retrieved from publications in the German Society of Human Genetics and through a PubMed-search using term quality + assurance + genetic + diagnostics. The most important laws, directives, and guidelines for quality assurance of human genetic testing are the gene diagnostics law (GenDG), the directive of the Federal Medical Council for quality control of clinical laboratory analysis (RiliBÄK), and the S2K guideline for human genetic diagnostics and counselling. In addition, voluntary accreditation under DIN EN ISO 15189:2013 offers a most recommended contribution towards quality assurance of human genetic testing. Legal restraints on quality assurance of human genetic testing as mentioned in § 5 GenDG are fulfilled once RiliBÄK requirements are followed.

  2. The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

    SciTech Connect

    Fix, N. J.

    2008-03-12

    Pacific Northwest National Laboratory researchers are working on the Columbia River Protection Supplemental Technologies Project. This project is a U. S. Department of Energy, Office of Environmental Management-funded initiative designed to develop new methods, strategies, and technologies for characterizing, modeling, remediating, and monitoring soils and groundwater contaminated with metals, radionuclides, and chlorinated organics. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by the Technologies Project staff.

  3. Ontario's Quality Assurance Framework: A Critical Response

    ERIC Educational Resources Information Center

    Heap, James

    2013-01-01

    Ontario's Quality Assurance Framework (QAF) is reviewed and found not to meet all five criteria proposed for a strong quality assurance system focused on student learning. The QAF requires a statement of student learning outcomes and a method and means of assessing those outcomes, but it does not require that data on achievement of intended…

  4. Quality Assurance Reconsidered: A Case Study

    ERIC Educational Resources Information Center

    Gynnild, Vidar

    2007-01-01

    This article examines an external evaluation of the quality assurance system at the Norwegian University of Science and Technology (NTNU) conducted by The Norwegian Agency for Quality Assurance in Higher Education (NOKUT). The external audit report along with internal reports provided by the seven faculties of the university served as the major…

  5. Quality Assurance in Sub-Saharan Africa

    ERIC Educational Resources Information Center

    Materu, Peter; Righetti, Petra

    2010-01-01

    This article assesses the status and practice of higher education quality assurance in sub-Saharan Africa, focusing on degree-granting tertiary institutions. A main finding is that structured national-level quality assurance processes in African higher education are a very recent phenomenon and that most countries face major capacity constraints.…

  6. Quality Assurance Reconsidered: A Case Study

    ERIC Educational Resources Information Center

    Gynnild, Vidar

    2007-01-01

    This article examines an external evaluation of the quality assurance system at the Norwegian University of Science and Technology (NTNU) conducted by The Norwegian Agency for Quality Assurance in Higher Education (NOKUT). The external audit report along with internal reports provided by the seven faculties of the university served as the major…

  7. Quality assurance manual: Volume 2, Appendices

    SciTech Connect

    Oijala, J.E.

    1988-06-01

    This paper contains quality assurance information on departments of the Stanford Linear Accelerator Center. Particular quality assurance policies and standards discussed are on: Mechanical Systems; Klystron and Microwave Department; Electronics Department; Plant Engineering; Accelerator Department; Purchasing; and Experimental Facilities Department. (LSP)

  8. Exploring Quality Assurance in Sixth Form Colleges

    ERIC Educational Resources Information Center

    Stoten, David William

    2012-01-01

    Purpose: This paper aims to focus on the changing nature of quality assurance systems within the sixth form college sector. Design/methodology/approach: Ten sixth form colleges were surveyed across England and staff from varying levels within college hierarchies questioned about how quality assurance systems were implemented. Research involved…

  9. 30 CFR 15.8 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under...

  10. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 6 2011-01-01 2011-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the...

  11. 30 CFR 7.7 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants...

  12. 30 CFR 14.8 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Quality assurance. 14.8 Section 14.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... Quality assurance. Applicants granted an approval or an extension of approval under this Part must: (a)...

  13. 30 CFR 15.8 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under...

  14. 30 CFR 7.7 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants...

  15. 30 CFR 15.8 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under...

  16. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 6 2013-01-01 2013-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the...

  17. 48 CFR 2453.246 - Quality Assurance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance....

  18. 30 CFR 15.8 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under...

  19. 30 CFR 15.8 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under...

  20. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the...

  1. 48 CFR 2453.246 - Quality Assurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance....

  2. 30 CFR 7.7 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants...

  3. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 6 2014-01-01 2014-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the...

  4. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 6 2012-01-01 2012-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the...

  5. 30 CFR 7.7 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants...

  6. 30 CFR 7.7 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants...

  7. 48 CFR 2453.246 - Quality Assurance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance....

  8. 48 CFR 2453.246 - Quality Assurance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance....

  9. 48 CFR 2453.246 - Quality Assurance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance....

  10. 30 CFR 14.8 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Quality assurance. 14.8 Section 14.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... Quality assurance. Applicants granted an approval or an extension of approval under this Part must: (a)...

  11. Quality Assurance in Sub-Saharan Africa

    ERIC Educational Resources Information Center

    Materu, Peter; Righetti, Petra

    2010-01-01

    This article assesses the status and practice of higher education quality assurance in sub-Saharan Africa, focusing on degree-granting tertiary institutions. A main finding is that structured national-level quality assurance processes in African higher education are a very recent phenomenon and that most countries face major capacity constraints.…

  12. Ontario's Quality Assurance Framework: A Critical Response

    ERIC Educational Resources Information Center

    Heap, James

    2013-01-01

    Ontario's Quality Assurance Framework (QAF) is reviewed and found not to meet all five criteria proposed for a strong quality assurance system focused on student learning. The QAF requires a statement of student learning outcomes and a method and means of assessing those outcomes, but it does not require that data on achievement of intended…

  13. Evaluation of Quality Assurance Programs for Externships.

    ERIC Educational Resources Information Center

    Ruskiewicz, Joseph

    1982-01-01

    The procedures of the Pennsylvania College of Optometry's Office of External Educational Programs are reviewed to show how quality assurance techniques can be categorized. The format was designed to evaluate quality assurance procedures for both the educational and service aspects of eye care. (MLW)

  14. Exploring Quality Assurance in Sixth Form Colleges

    ERIC Educational Resources Information Center

    Stoten, David William

    2012-01-01

    Purpose: This paper aims to focus on the changing nature of quality assurance systems within the sixth form college sector. Design/methodology/approach: Ten sixth form colleges were surveyed across England and staff from varying levels within college hierarchies questioned about how quality assurance systems were implemented. Research involved…

  15. Teacher Reaction to ICP Quality Assurance Procedures.

    ERIC Educational Resources Information Center

    Leonard, Ann

    An integral part of the Quality Assurance Manual developed by Southwest Regional Laboratory (SWRL) to accompany the Kindergarten Program is the end-of-program assessment of the Instructional Concepts Program (ICP). Following completion of ICP Quality Assurance assessment, four teachers were interviewed in order to gather information pertinent to…

  16. [Quality assurance in acupuncture therapy].

    PubMed

    Kubiena, G

    1996-04-01

    Quality assurance for acupuncture therapy requires a good basic and on-going training in both conventional western medicine as well as in the theory and practice of acupuncture, the ability to synthesize the patient's objective findings and subjective feelings, and honesty with the patient and towards oneself. Thus, based on the continuous critical evaluation of the objective and subjective parameters, the question of acupunture as the optimal form of therapy for this specific case is honestly answered and one has the courage to admit failures. With regard to the theory, surveys of the acupuncture literature show that a considerable improvement in quality and honesty is necessary. There is a lack of standardised experimental methods (e.g. 28 different placebos in 28 different studies!). Especially German acupuncture journals have a disturbed relation to failures. To hide or deny failures is of no benefit neither to acupuncture, science to the relationship between the physician and the patient since the practitioner must be able to rely on the information in the literature. Furthermore, one should be open minded to alternative methods even if this means to refer a patient to a colleague.

  17. The Earthscope USArray Array Network Facility (ANF): Metadata, Network and Data Monitoring, Quality Assurance as We Start to Roll

    NASA Astrophysics Data System (ADS)

    Eakins, J. A.; Vernon, F. L.; Astiz, L.; Martynov, V.; Mulder, T.; Cox, T. A.; Newman, R. L.; Davis, G.; Battistutz, B.

    2008-12-01

    The Array Network Facility (ANF) for the Earthscope USArray Transportable Array seismic network is responsible for: the delivery of all 400+ Transportable Array stations to the IRIS Data Management Center, collection of regional network stations which contribute data to the Transportable Array; station command and control; verification and distribution of metadata (~560 current and former TA stations as of September 2008); providing interfaces for personnel at the Array Operations Facility (AOF) to access state of health information; and quality control for all data. To meet these goals, we use BRTT's Antelope software package to: facilitate data collection and transfer; generate and merge station metadata; monitor real-time datalogger state-of-health; and review seismic events. Weekly transfers of dataless SEED and Virtual Network Definitions (VNDs) are simplified by the use of ORB transfer technologies at the ANF and receiver end points. Extensions to the Antelope software package have been contributed to help with data center operations. Additional software packages including Dartware's InterMapper network monitoring application and Round Robin Database Tool monitor and report on hardware or communications failures. The on-going quality control process includes: 1) automatic event processing followed by daily analyst review associating arrivals against available regional network bulletins (36000+ events and 1.9 million picks); 2) review of clock quality and error; 3) review of number of mass recenters; 4) review of percent of time any of the three mass positions are out of range; 5) alarms upon datalogger reboots; 6) alarms upon active pumps; and 7) review of calibration signals at each station upon installation and prior to removal. Much of this information is available via interactive online tools at the ANF website (http://anf.ucsd.edu).

  18. Measurement quality assurance for radioassay laboratories

    SciTech Connect

    McCurdy, D.E.

    1993-12-31

    Until recently, the quality of U.S. radioassay laboratory services has been evaluated by a limited number of governmental measurement assurance programs (MAPs). The major programs have been limited to the U.S. Department of Energy (DOE), the U.S. Environmental Protection Agency (EPA) and the U.S. Nuclear Regulatory Commission (NRC). In 1988, an industry MAP was established for the nuclear power utility industry through the U.S. Council for Energy Awareness/National Institute of Standards and Technology (USCEA/NIST). This program functions as both a MAP for utility laboratories and/or their commercial contractor laboratories, and as a traceability program for the U.S. radioactive source manufacturers and the utility laboratories. Each of these generic MAPs has been initiated and is maintained to serve the specific needs of the sponsoring agency or organization. As a result, there is diversification in their approach, scope, requirements, and degree of traceability to NIST. In 1987, a writing committee was formed under the American National Standards Institute (ANSI) N42.2 committee to develop a standard to serve as the basis document for the creation of a national measurement quality assurance (MQA) program for radioassay laboratories in the U.S. The standard is entitled, {open_quotes}Measurement Quality Assurance For Radioassay Laboratories.{open_quotes} The document was developed to serve as a guide for MQA programs maintained for the specialized sectors of the radioassay community, such as bioassay, routine environmental monitoring, environmental restoration and waste management, radiopharmaceuticals, and nuclear facilities. It was the intent of the writing committee to develop a guidance document that could be utilized to establish a laboratory`s specific data quality objectives (DQOs) that govern the operational requirements of the radioassay process, including mandated protocols and recommendations.

  19. Quality Assurance Planning for Region 6

    EPA Pesticide Factsheets

    The ultimate success of an environmental program or project depends on the quality of the environmental data collected and used in decision-making. EPA has developed guidances to help state and tribal governments develop Quality Assurance Program Plans.

  20. Quality Assurance Planning for Region 9

    EPA Pesticide Factsheets

    The ultimate success of an environmental program or project depends on the quality of the environmental data collected and used in decision-making. EPA has developed guidances to help state and tribal governments develop Quality Assurance Program Plans.

  1. Training, Quality Assurance Factors, and Tools Investigation: a Work Report and Suggestions on Software Quality Assurance

    NASA Technical Reports Server (NTRS)

    Lee, Pen-Nan

    1991-01-01

    Previously, several research tasks have been conducted, some observations were obtained, and several possible suggestions have been contemplated involving software quality assurance engineering at NASA Johnson. These research tasks are briefly described. Also, a brief discussion is given on the role of software quality assurance in software engineering along with some observations and suggestions. A brief discussion on a training program for software quality assurance engineers is provided. A list of assurance factors as well as quality factors are also included. Finally, a process model which can be used for searching and collecting software quality assurance tools is presented.

  2. Printed Circuit Board Quality Assurance

    NASA Technical Reports Server (NTRS)

    Sood, Bhanu

    2016-01-01

    PCB Assurance Summary: PCB assurance actives are informed by risk in context of the Project. Lessons are being applied across Projects for continuous improvements. Newer component technologies, smaller/high pitch devices: tighter and more demanding PCB designs: Identifying new research areas. New materials, designs, structures and test methods.

  3. Total Quality Management Implementation Strategy: Directorate of Quality Assurance

    DTIC Science & Technology

    1989-05-01

    Directorate of Quality Assurance Total Quality Management Implementation Strategy 6. AUTHOR(S) 7. PERFORMING ORGANIZATION NAME(S) AND ADORESS(ES) 8...that job. DTIC 7: t-I ECTE I SEP29 1989 14. SUBJECT TERMS 15. NUMBER OF PAGES TOM ( Total Quality Management ), Quality Assurance, Continuous Process...Prescribed by ANSI Std Z39-18 29d- 102 DEFENSE LOGISTICS AGENCY DIRECTORATE OF QUALITY ASSURANCE 0 TOTAL QUALITY MANAGEMENT IMPLEMENTATION STRATEGY 0 89 9

  4. The Groundwater Performance Assessment Project Quality Assurance Plan

    SciTech Connect

    Luttrell, Stuart P.

    2006-05-11

    U.S. Department of Energy (DOE) has monitored groundwater on the Hanford Site since the 1940s to help determine what chemical and radiological contaminants have made their way into the groundwater. As regulatory requirements for monitoring increased in the 1980s, there began to be some overlap between various programs. DOE established the Groundwater Performance Assessment Project (groundwater project) in 1996 to ensure protection of the public and the environment while improving the efficiency of monitoring activities. The groundwater project is designed to support all groundwater monitoring needs at the site, eliminate redundant sampling and analysis, and establish a cost-effective hierarchy for groundwater monitoring activities. This document provides the quality assurance guidelines that will be followed by the groundwater project. This QA Plan is based on the QA requirements of DOE Order 414.1C, Quality Assurance, and 10 CFR 830, Subpart A--General Provisions/Quality Assurance Requirements as delineated in Pacific Northwest National Laboratory’s Standards-Based Management System. In addition, the groundwater project is subject to the Environmental Protection Agency (EPA) Requirements for Quality Assurance Project Plans (EPA/240/B-01/003, QA/R-5). The groundwater project has determined that the Hanford Analytical Services Quality Assurance Requirements Documents (HASQARD, DOE/RL-96-68) apply to portions of this project and to the subcontractors. HASQARD requirements are discussed within applicable sections of this plan.

  5. The Concepts of Quality, Quality Assurance and Quality Enhancement

    ERIC Educational Resources Information Center

    Elassy, Noha

    2015-01-01

    Purpose: This paper aims to critically review and discuss different definitions of the concepts of quality, quality assurance (QA) and quality enhancement (QE) in higher education (HE) with presenting critical perspectives of the literature. Design/methodology/approach: The paper looks at literature concerns with the meaning of quality, QA and QE,…

  6. The Concepts of Quality, Quality Assurance and Quality Enhancement

    ERIC Educational Resources Information Center

    Elassy, Noha

    2015-01-01

    Purpose: This paper aims to critically review and discuss different definitions of the concepts of quality, quality assurance (QA) and quality enhancement (QE) in higher education (HE) with presenting critical perspectives of the literature. Design/methodology/approach: The paper looks at literature concerns with the meaning of quality, QA and QE,…

  7. SWiFT Software Quality Assurance Plan.

    SciTech Connect

    Berg, Jonathan Charles

    2016-01-01

    This document describes the software development practice areas and processes which contribute to the ability of SWiFT software developers to provide quality software. These processes are designed to satisfy the requirements set forth by the Sandia Software Quality Assurance Program (SSQAP). APPROVALS SWiFT Software Quality Assurance Plan (SAND2016-0765) approved by: Department Manager SWiFT Site Lead Dave Minster (6121) Date Jonathan White (6121) Date SWiFT Controls Engineer Jonathan Berg (6121) Date CHANGE HISTORY Issue Date Originator(s) Description A 2016/01/27 Jon Berg (06121) Initial release of the SWiFT Software Quality Assurance Plan

  8. Quality assurance guides health reform in Jordan.

    PubMed

    Abubaker, W; Abdulrahman, M

    1996-01-01

    In November 1995, a World Bank mission went to Jordan to conduct a study of the health sector. The study recommended three strategies to reform the health sector: decentralization of Ministry of Health (MOH) management; improvement of clinical practices, quality of care, and consumer satisfaction; and adoption of treatment protocols and standards. The MOH chose quality assurance (QA) methods and quality management (QM) techniques to accomplish these reforms. The Monitoring and QA Directorate oversees QA applications within MOH. It also institutes and develops the capacity of local QA units in the 12 governorates. The QA units implement and monitor day-to-day QA activities. The QM approach encompasses quality principles: establish objectives; use a systematic approach; teach lessons learned and applicable research; use QA training to teach quality care, quality improvement, and patient satisfaction; educate health personnel about QM approaches; use assessment tools and interviews; measure the needs and expectations of local health providers and patients; ensure feedback on QA improvement projects; ensure valid and reliable data; monitor quality improvement efforts; standardize systemic data collection and outcomes; and establish and disseminate QA standards and performance improvement efforts. The Jordan QA Project has helped with the successful institutionalization of a QA system at both the central and local levels. The bylaws of the QA councils and committees require team participation in the decision-making process. Over the last two years, the M&QA Project has adopted 21 standards for nursing, maternal and child health care centers, pharmacies, and medications. The Balqa pilot project has developed 44 such protocols. Quality improvement (COUGH) studies have examined hyper-allergy, analysis of patient flow rate, redistribution of nurses, vaccine waste, and anemic pregnant women. There are a considerable number of on-going clinical and non-clinical COUGH studies

  9. 48 CFR 37.604 - Quality assurance surveillance plans.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance plans are in Subpart 46.4. The Government may either prepare the quality assurance surveillance plan or require the offerors to submit a proposed quality assurance surveillance plan for the Government's...

  10. Automated Quality Assurance of Online NIR Analysers

    PubMed Central

    Aaljoki, Kari

    2005-01-01

    Modern NIR analysers produce valuable data for closed-loop process control and optimisation practically in real time. Thus it is highly important to keep them in the best possible shape. Quality assurance (QA) of NIR analysers is an interesting and complex issue because it is not only the instrument and sample handling that has to be monitored. At the same time, validity of prediction models has to be assured. A system for fully automated QA of NIR analysers is described. The system takes care of collecting and organising spectra from various instruments, relevant laboratory, and process management system (PMS) data. Validation of spectra is based on simple diagnostics values derived from the spectra. Predictions are validated against laboratory (LIMS) or other online analyser results (collected from PMS). The system features automated alarming, reporting, trending, and charting functions for major key variables for easy visual inspection. Various textual and graphical reports are sent to maintenance people through email. The software was written with Borland Delphi 7 Enterprise. Oracle and PMS ODBC interfaces were used for accessing LIMS and PMS data using appropriate SQL queries. It will be shown that it is possible to take actions even before the quality of predictions is seriously affected, thus maximising the overall uptime of the instrument. PMID:18924628

  11. Automated Quality Assurance of Online NIR Analysers.

    PubMed

    Aaljoki, Kari

    2005-01-01

    Modern NIR analysers produce valuable data for closed-loop process control and optimisation practically in real time. Thus it is highly important to keep them in the best possible shape. Quality assurance (QA) of NIR analysers is an interesting and complex issue because it is not only the instrument and sample handling that has to be monitored. At the same time, validity of prediction models has to be assured. A system for fully automated QA of NIR analysers is described. The system takes care of collecting and organising spectra from various instruments, relevant laboratory, and process management system (PMS) data. Validation of spectra is based on simple diagnostics values derived from the spectra. Predictions are validated against laboratory (LIMS) or other online analyser results (collected from PMS). The system features automated alarming, reporting, trending, and charting functions for major key variables for easy visual inspection. Various textual and graphical reports are sent to maintenance people through email. The software was written with Borland Delphi 7 Enterprise. Oracle and PMS ODBC interfaces were used for accessing LIMS and PMS data using appropriate SQL queries. It will be shown that it is possible to take actions even before the quality of predictions is seriously affected, thus maximising the overall uptime of the instrument.

  12. Assuring quality in high-consequence engineering

    SciTech Connect

    Hoover, Marcey L.; Kolb, Rachel R.

    2014-03-01

    In high-consequence engineering organizations, such as Sandia, quality assurance may be heavily dependent on staff competency. Competency-dependent quality assurance models are at risk when the environment changes, as it has with increasing attrition rates, budget and schedule cuts, and competing program priorities. Risks in Sandia's competency-dependent culture can be mitigated through changes to hiring, training, and customer engagement approaches to manage people, partners, and products. Sandia's technical quality engineering organization has been able to mitigate corporate-level risks by driving changes that benefit all departments, and in doing so has assured Sandia's commitment to excellence in high-consequence engineering and national service.

  13. External quality assurance in Malaysia.

    PubMed

    Nawawi, H; Lim, H H; Zakiah, I

    1999-01-01

    An activity supportive of the MOH QA Programme, the National EQAS for clinical chemistry monitors for analytical performance in core routine biochemical testing by the pathology laboratories, with unsatisfactory performance scores serving to alert against deficiencies or problems and the scores in subsequent challenges providing the feedback of effectiveness of remedial actions taken. While unacceptable individual analyte performance score (variance index score, VIS) indicated problems in instruments, reagent and calibrators, or the use of inherently poorer methods, repeated occurrence of unsatisfactory OMRVIS was traceable to generally poor laboratory management of usually inadequately-equipment small laboratories. The outcome has been one of slow but gradual improvement in the overall performance of participating laboratories, with a move towards methods upgrading and standardization to achieve greater concordance of results. Presently, the programme is limited to 61 government and 4 private hospital laboratories in the country for 12 commonly assayed clinical biochemistry analytes. It is hoped that the NEQAS could be extended to the other private laboratories and that of academic institutions. However, this is dependent to a large extent on the manpower and financial support obtainable by the organizing body of the programme in the future. Belk and Sunderman, 1947 demonstrated that laboratories participating in an quality assessment scheme could rapidly and dramatically improve their analytical performance. In some countries, participation has become mandatory, and acceptable performance is a requirement in laboratory accreditation. The need and value of the NEQAP is, therefore, evident. While there may be limitations in the national programme. efforts are being made at improving the programme within the means and resources of the organising body. The goals of the NEQAP are not just to monitor performance but also to educate. On this, matters related to and

  14. Quality assurance in UK higher education

    NASA Astrophysics Data System (ADS)

    Shrimplin, Valerie

    Quality Assurance methods are becoming increasingly well known as systems applicable in business, commerce and industry. In modified form, such concepts can be applied to higher education and, in the UK, quality systems are utilized in universities in order to ensure the quality of provision and standards of awards. Similar principles may also be applied to the evaluation of quality in research.

  15. The use of modern electronic flat panel devices for image guided radiation therapy:. Image quality comparison, intra fraction motion monitoring and quality assurance applications

    NASA Astrophysics Data System (ADS)

    Nill, S.; Stützel, J.; Häring, P.; Oelfke, U.

    2008-06-01

    With modern radiotherapy delivery techniques like intensity modulated radiotherapy (IMRT) it is possible to delivery a more conformal dose distribution to the tumor while better sparing the organs at risk (OAR) compared to 3D conventional radiation therapy. Due to the theoretically high dose conformity achievable it is very important to know the exact position of the target volume during the treatment. With more and more modern linear accelerators equipped with imaging devices this is now almost possible. These imaging devices are using energies between 120kV and 6MV and therefore different detector systems are used but the vast majority is using amorphous silicon flat panel devices with different scintilator screens and build up materials. The technical details and the image quality of these systems are discussed and first results of the comparison are presented. In addition new methods to deal with motion management and quality assurance procedures are shortly discussed.

  16. The Earthscope USArray Array Network Facility (ANF): Metadata, Network and Data Monitoring, Quality Assurance During the Second Year of Operations

    NASA Astrophysics Data System (ADS)

    Eakins, J. A.; Vernon, F. L.; Martynov, V.; Newman, R. L.; Cox, T. A.; Lindquist, K. L.; Hindley, A.; Foley, S.

    2005-12-01

    The Array Network Facility (ANF) for the Earthscope USArray Transportable Array seismic network is responsible for: the delivery of all Transportable Array stations (400 at full deployment) and telemetered Flexible Array stations (up to 200) to the IRIS Data Management Center; station command and control; verification and distribution of metadata; providing useful remotely accessible world wide web interfaces for personnel at the Array Operations Facility (AOF) to access state of health information; and quality control for all data. To meet these goals, we use the Antelope software package to facilitate data collection and transfer, generation and merging of the metadata, real-time monitoring of dataloggers, generation of station noise spectra, and analyst review of individual events. Recently, an Antelope extension to the PHP scripting language has been implemented which facilitates the dynamic presentation of the real-time data to local web pages. Metadata transfers have been simplified by the use of orb transfer technologies at the ANF and receiver end points. Web services are being investigated as a means to make a potentially complicated set of operations easy to follow and reproduce for each newly installed or decommissioned station. As part of the quality control process, daily analyst review has highlighted areas where neither the regional network bulletins nor the USGS global bulletin have published solutions. Currently four regional networks (Anza, BDSN, SCSN, and UNR) contribute data to the Transportable Array with additional contributors expected. The first 100 stations (42 new Earthscope stations) were operational by September 2005 with all but one of the California stations installed. By year's end, weather permitting, the total number of stations deployed is expected to be around 145. Visit http://anf.ucsd.edu for more information on the project and current status.

  17. 40 CFR 136.7 - Quality assurance and quality control.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Quality assurance and quality control... assurance and quality control. The permittee/laboratory shall use suitable QA/QC procedures when conducting... quality control elements, where applicable, into the laboratory's documented standard operating...

  18. 40 CFR 136.7 - Quality assurance and quality control.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Quality assurance and quality control... assurance and quality control. The permittee/laboratory shall use suitable QA/QC procedures when conducting... quality control elements, where applicable, into the laboratory's documented standard operating...

  19. 40 CFR 136.7 - Quality assurance and quality control.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Quality assurance and quality control... assurance and quality control. The permittee/laboratory shall use suitable QA/QC procedures when conducting... quality control elements, where applicable, into the laboratory's documented standard operating...

  20. [Health care quality assurance in the Netherlands].

    PubMed

    Reerink, E

    1990-01-01

    In this paper the main structural features of the dutch health system are described, together with a historical survey of its development in recent years. The basic elements of quality assurance in the country are also discussed.

  1. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ADMINISTRATIVE REQUIREMENTS FOR GRANTS AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's...

  2. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ADMINISTRATIVE REQUIREMENTS FOR GRANTS AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's...

  3. Quality assurance - no margin for error

    SciTech Connect

    Thomas, R.L.; Smith, C.F.; Grant, W.D.

    1982-01-01

    Quality assurance (QA), a critical component of a hydraulic fracturing treatment, must be performed prior to and during the job. Failure to follow QA procedures may result in added well costs and poor production. It begins during the design and ends after the completion of the job. The importance of QA has been magnified due to the increased size and complexity fracturing treatments. It is a tool used to insure that fluids, proppants, and equipment meet the increased demands placed upon them. This study discusses several steps take in order to provide QA. An explanation of procedures used during the job design and prior to the job is given. A discussion of procedures and trouble shooting techniques used prior to and during the job also is presented. The sensors and computer system used in order to monitor QA data also are discussed.

  4. Quality assurance program for isotopic power systems

    SciTech Connect

    Hannigan, R.L.; Harnar, R.R.

    1982-12-01

    This report summarizes the Sandia National Laboratories Quality Assurance Program that applies to non-weapon (reimbursable) Radioisotopic Thermoelectric Generators. The program has been implemented over the past 16 years on power supplies used in various space and terrestrial systems. The quality assurance (QA) activity of the program is in support of the Department of Energy, Office of Space Nuclear Projects. Basic elements of the program are described in the report and examples of program decumentation are presented.

  5. Quality assurance program for isotopic power systems

    NASA Astrophysics Data System (ADS)

    Hannigan, R. L.; Harnar, R. R.

    1982-12-01

    The Sandia National Laboratories Quality Assurance Program that applies to non-weapon (reimbursable) Radioisotopic Thermoelectric Generators is summarized. The program was implemented over the past 16 years on power supplies used in various space and terrestrial systems. The quality assurance (QA) activity of the program is in support of the Department of Energy, Office of Space Nuclear Projects. Basic elements of the program are described and examples of program documentation are presented.

  6. 10 CFR 71.101 - Quality assurance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... perform satisfactorily in service. Quality assurance includes quality control, which comprises those... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance requirements. 71.101 Section 71.101... Quality Assurance § 71.101 Quality assurance requirements. (a) Purpose. This subpart describes...

  7. Transuranic Waste Characterization Quality Assurance Program Plan

    SciTech Connect

    1995-04-30

    This quality assurance plan identifies the data necessary, and techniques designed to attain the required quality, to meet the specific data quality objectives associated with the DOE Waste Isolation Pilot Plant (WIPP). This report specifies sampling, waste testing, and analytical methods for transuranic wastes.

  8. Quality Assurance of Multiple-Choice Tests

    ERIC Educational Resources Information Center

    Bush, Martin E.

    2006-01-01

    Purpose: To provide educationalists with an understanding of the key quality issues relating to multiple-choice tests, and a set of guidelines for the quality assurance of such tests. Design/methodology/approach: The discussion of quality issues is structured to reflect the order in which those issues naturally arise. It covers the design of…

  9. Quality assurance programs for pressure ulcers.

    PubMed

    Xakellis, G C

    1997-08-01

    Traditional medical quality assurance programs are beginning to incorporate the principles of continuous quality improvement pioneered by Juran and Deming. Strategies for incorporating these principles into a long-term care facility are described, and two examples of successful implementation of continuous quality improvement programs for pressure ulcers are presented.

  10. Instructional Quality Assurance at Lansing Community College.

    ERIC Educational Resources Information Center

    Herder, Dale M.; And Others

    Drawing from the experiences of Lansing Community College (LCC), this paper offers a rationale and model for measuring instructional quality. Section I offers background on LCC's efforts to assess the quality of its courses and curricula, and to introduce such quality assurance procedures as computer-based course syllabi, department and program…

  11. HELIOS Critical Design Review: Quality Assurance

    NASA Technical Reports Server (NTRS)

    Benoehr, H. C.; Herholz, J.; Prem, H.; Mann, D.; Reichert, L.; Rupp, W.; Campbell, D.; Boettger, H.; Zerwes, G.; Kurvin, C.

    1972-01-01

    The following is an account of the activities of the Quality Assurance (QA) department of the project management office highlighting some of the ways in which it controls QA of the subcontractors on one hand and reports on Quality to GfW (Gesellschaft fur Weltraumforschung) on the other hand. The basic document prepared by MBB (Messerschmitt-Bolkow-Blohm) for QA activities is 1. The QA plan based on GfW 002. The QA department is responsible moreover for monitoring and making decisions about the quality of parts and materials and the governing document for this activity is 2. The Parts and Materials Control Plan based on GfW 001 - the reliability program provisions, as well as GfW 002. A brief survey of the contents of the QA Plan is shown. It should be noted that QA activity dealing with parts procurement is partially covered in a separate presentation entitled "Hi-Rel Parts". Supplementary quality documents are shown.

  12. HELIOS Critical Design Review: Quality Assurance

    NASA Technical Reports Server (NTRS)

    Benoehr, H. C.; Herholz, J.; Prem, H.; Mann, D.; Reichert, L.; Rupp, W.; Campbell, D.; Boettger, H.; Zerwes, G.; Kurvin, C.

    1972-01-01

    The following is an account of the activities of the Quality Assurance (QA) department of the project management office highlighting some of the ways in which it controls QA of the subcontractors on one hand and reports on Quality to GfW (Gesellschaft fur Weltraumforschung) on the other hand. The basic document prepared by MBB (Messerschmitt-Bolkow-Blohm) for QA activities is 1. The QA plan based on GfW 002. The QA department is responsible moreover for monitoring and making decisions about the quality of parts and materials and the governing document for this activity is 2. The Parts and Materials Control Plan based on GfW 001 - the reliability program provisions, as well as GfW 002. A brief survey of the contents of the QA Plan is shown. It should be noted that QA activity dealing with parts procurement is partially covered in a separate presentation entitled "Hi-Rel Parts". Supplementary quality documents are shown.

  13. New developments in NASA quality assurance

    NASA Technical Reports Server (NTRS)

    Condon, John E.

    1966-01-01

    The purpose of this talk is to examine and discuss NASA's basic quality concept, the policy and procedures which define and implement this concept and subsequently explore the NASA-Industry quality relationships which are essential to the success of NASA's quality assurance concept. It is important to emphasize that NASA's Quality Assurance program is predicated on the concept of an individually tailored quality program for each significant NASA procurement - particularly, large space systems. As a result, NASA's Quality Assurance program - to be effective - must be responsive to various technologies, hardware systems, and space missions. In addition, the program must be responsive to changing policies and practices in research, engineering and procurement. Key issues in the NASA-Contractor quality relationships in the framework of an over all NASA-Industry partnership include: (1) the necessity for NASA to effectively discharge its responsibility for providing clear and complete definition of quality requirements at all phases of the procurement cycle; (2) the right of the contractor to expect an explicit definition of NASA quality requirements in each RFP and contract and to request same if it is not provided; (3) the necessity for the contractor to have a dynamic and responsive quality program which is directed towards assuring that the hardware meets all technical requirements and to accomplish this in an effective and efficient manner; and (4) the critical need for investigation and study of the economic aspects of quality and an evaluation of our policies and practices based upon the results of such a study.

  14. New developments in NASA quality assurance

    NASA Technical Reports Server (NTRS)

    Condon, John E.

    1966-01-01

    The purpose of this talk is to examine and discuss NASA's basic quality concept, the policy and procedures which define and implement this concept and subsequently explore the NASA-Industry quality relationships which are essential to the success of NASA's quality assurance concept. It is important to emphasize that NASA's Quality Assurance program is predicated on the concept of an individually tailored quality program for each significant NASA procurement - particularly, large space systems. As a result, NASA's Quality Assurance program - to be effective - must be responsive to various technologies, hardware systems, and space missions. In addition, the program must be responsive to changing policies and practices in research, engineering and procurement. Key issues in the NASA-Contractor quality relationships in the framework of an over all NASA-Industry partnership include: (1) the necessity for NASA to effectively discharge its responsibility for providing clear and complete definition of quality requirements at all phases of the procurement cycle; (2) the right of the contractor to expect an explicit definition of NASA quality requirements in each RFP and contract and to request same if it is not provided; (3) the necessity for the contractor to have a dynamic and responsive quality program which is directed towards assuring that the hardware meets all technical requirements and to accomplish this in an effective and efficient manner; and (4) the critical need for investigation and study of the economic aspects of quality and an evaluation of our policies and practices based upon the results of such a study.

  15. Automating linear accelerator quality assurance

    SciTech Connect

    Eckhause, Tobias; Thorwarth, Ryan; Moran, Jean M.; Al-Hallaq, Hania; Farrey, Karl; Ritter, Timothy; DeMarco, John; Pawlicki, Todd; Kim, Gwe-Ya; Popple, Richard; Sharma, Vijeshwar; Park, SungYong; Perez, Mario; Booth, Jeremy T.

    2015-10-15

    Purpose: The purpose of this study was 2-fold. One purpose was to develop an automated, streamlined quality assurance (QA) program for use by multiple centers. The second purpose was to evaluate machine performance over time for multiple centers using linear accelerator (Linac) log files and electronic portal images. The authors sought to evaluate variations in Linac performance to establish as a reference for other centers. Methods: The authors developed analytical software tools for a QA program using both log files and electronic portal imaging device (EPID) measurements. The first tool is a general analysis tool which can read and visually represent data in the log file. This tool, which can be used to automatically analyze patient treatment or QA log files, examines the files for Linac deviations which exceed thresholds. The second set of tools consists of a test suite of QA fields, a standard phantom, and software to collect information from the log files on deviations from the expected values. The test suite was designed to focus on the mechanical tests of the Linac to include jaw, MLC, and collimator positions during static, IMRT, and volumetric modulated arc therapy delivery. A consortium of eight institutions delivered the test suite at monthly or weekly intervals on each Linac using a standard phantom. The behavior of various components was analyzed for eight TrueBeam Linacs. Results: For the EPID and trajectory log file analysis, all observed deviations which exceeded established thresholds for Linac behavior resulted in a beam hold off. In the absence of an interlock-triggering event, the maximum observed log file deviations between the expected and actual component positions (such as MLC leaves) varied from less than 1% to 26% of published tolerance thresholds. The maximum and standard deviations of the variations due to gantry sag, collimator angle, jaw position, and MLC positions are presented. Gantry sag among Linacs was 0.336 ± 0.072 mm. The

  16. The HERITAGE Family Study: quality assurance and quality control.

    PubMed

    Gagnon, J; Province, M A; Bouchard, C; Leon, A S; Skinner, J S; Wilmore, J H; Rao, D C

    1996-11-01

    The HERITAGE (HEalth, RIsk factors, exercise Training And GEnetics) Family Study is the first multicenter family clinical trial of its kind. Conducted by a consortium of five universities in the United States and Canada, the study has as its primary goal to document the role of the genotype in the cardiovascular, metabolic, and hormonal responses to aerobic exercise training. A comprehensive protocol was implemented at four Clinical Centers (CC) for the generation of data on sedentary subjects. This group included 450 caucasians from 90 nuclear families (father, mother, three children) and 200 black subjects from 40 to 100 family units over a 5-year period. The entire family was tested before and after a 20-week exercise training program. The fifth participating center, the Data Coordinating Center (DCC), is responsible for data management and data analysis. A Consortium Coordinating Center (CCC) responsible for the overall coordination and direction of the study was established at the Quebec CC. Quality assurance and quality control are jointly coordinated by the CCC and the DCC. A multicenter study of this magnitude requires careful standardization of all procedures and constant monitoring of quality control at all levels of operation. This report describes the quality assurance and quality control measures implemented in the HERITAGE Family Study, including some examples with real data.

  17. Quality-Assurance Plan for Water-Quality Activities in the USGS Ohio Water Science Center

    USGS Publications Warehouse

    Francy, Donna S.; Shaffer, Kimberly H.

    2008-01-01

    In accordance with guidelines set forth by the Office of Water Quality in the Water Resources Discipline of the U.S. Geological Survey, a quality-assurance plan has been written for use by the Ohio Water Science Center in conducting water-quality activities. This quality-assurance plan documents the standards, policies, and procedures used by the Ohio Water Science Center for activities related to the collection, processing, storage, analysis, and publication of water-quality data. The policies and procedures documented in this quality-assurance plan for water-quality activities are meant to complement the Ohio Water Science Center quality-assurance plans for water-quality monitors, the microbiology laboratory, and surface-water and ground-water activities.

  18. 10 CFR 72.140 - Quality assurance requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance requirements. 72.140 Section 72.140... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.140 Quality assurance requirements. (a) Purpose. This subpart describes quality assurance...

  19. 7 CFR 56.39 - Quality assurance inspector required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Quality assurance inspector required. 56.39 Section 56... Identified with Grademarks § 56.39 Quality assurance inspector required. The official identification with the... supervision of a grader or quality assurance inspector. The grader or quality assurance inspector shall...

  20. 7 CFR 90.102 - Quality assurance review.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Quality assurance review. 90.102 Section 90.102... INTRODUCTION Quality Assurance § 90.102 Quality assurance review. (a) Each laboratory performing tests and analysis under this subchapter will be subject to a quality assurance program evaluation at least...

  1. 7 CFR 56.39 - Quality assurance inspector required.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Quality assurance inspector required. 56.39 Section 56... Identified with Grademarks § 56.39 Quality assurance inspector required. The official identification with the... supervision of a grader or quality assurance inspector. The grader or quality assurance inspector shall...

  2. 7 CFR 56.39 - Quality assurance inspector required.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Quality assurance inspector required. 56.39 Section 56... Identified with Grademarks § 56.39 Quality assurance inspector required. The official identification with the... supervision of a grader or quality assurance inspector. The grader or quality assurance inspector shall...

  3. 48 CFR 37.604 - Quality assurance surveillance plans.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Quality assurance... SPECIAL CATEGORIES OF CONTRACTING SERVICE CONTRACTING Performance-Based Acquisition 37.604 Quality assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance...

  4. 16 CFR 1633.6 - Quality assurance requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Quality assurance requirements. 1633.6... STANDARD FOR THE FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS The Standard § 1633.6 Quality assurance requirements. (a) Quality assurance. Each manufacturer shall implement a quality assurance program to...

  5. 23 CFR 637.207 - Quality assurance program.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Quality assurance program. 637.207 Section 637.207... CONSTRUCTION INSPECTION AND APPROVAL Quality Assurance Procedures for Construction § 637.207 Quality assurance program. (a) Each STD's quality assurance program shall provide for an acceptance program and...

  6. 23 CFR 637.207 - Quality assurance program.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Quality assurance program. 637.207 Section 637.207... CONSTRUCTION INSPECTION AND APPROVAL Quality Assurance Procedures for Construction § 637.207 Quality assurance program. (a) Each STD's quality assurance program shall provide for an acceptance program and...

  7. 48 CFR 37.604 - Quality assurance surveillance plans.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Quality assurance... SPECIAL CATEGORIES OF CONTRACTING SERVICE CONTRACTING Performance-Based Acquisition 37.604 Quality assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance plans...

  8. [Quality assurance in ENT tumor surgery].

    PubMed

    Eckel, H E; Streppel, M; Schmalenbach, K; Volling, P; Schrappe, M; Dietz, A; Bootz, F

    2000-12-01

    Quality control is of special importance in head and neck oncology since the quality of medical care constitutes a vital parameter for the diseased patient. In contrast to other medical specialties, no quality assurance program for head and neck cancer patients has yet been established in Germany. Therefore, a survey was conducted to assess the quality assurance instruments that are in use today in otorhinolaryngology-head and neck (ORL-HNS) centers. In a nationwide survey, questionnaires were sent out to 146 German ORL-HNS departments (the return rate was 75%). 56% of all departments apply dedicated quality assurance processes, and 38% have appointed a formal quality assurance officer. Interdisciplinary oncological conferences are held in the vast majority of all departments with the participation of radiation oncologists in 86 (78%), medical oncologists in 84 (76%), diagnostic radiologists in 82 (74%), and pathologists in 73 (66%). Morbidity-mortality conferences are held in seven departments (6%). A standardized follow-up of oncological patients is carried out in 95 units (86%), and 53 departments use computer-assisted data bases to organize their follow-up data (48%). A wide variety of documentation systems is in use throughout the country: 78 units (71%) offer formal follow-up to their oncological patients. This survey documents a wide-spread interest in quality assurance procedures. Many individual efforts are being undertaken. However, no uniform quality assurance or auditing system is currently in use in Germany nor is a commonly accepted data base available. The ability to offer oncological follow-up within the national social security system is generally considered indispensable for the maintenance of high-quality oncological care in ORL-HNS departments.

  9. Triangle Area Water Supply Monitoring Project, North Carolina—Summary of monitoring activities, quality assurance, and data, October 2013–September 2015

    USGS Publications Warehouse

    Pfeifle, C.A.; Cain, J.L.; Rasmussen, R.B.

    2017-09-27

    Surface-water supplies are important sources of drinking water for residents in the Triangle area of North Carolina, which is located within the upper Cape Fear and Neuse River Basins. Since 1988, the U.S. Geological Survey and a consortium of local governments have tracked water-quality conditions and trends in several of the area’s water-supply lakes and streams. This report summarizes data collected through this cooperative effort, known as the Triangle Area Water Supply Monitoring Project, during October 2013 through September 2014 (water year 2014) and October 2014 through September 2015 (water year 2015). Major findings for this period include:More than 5,500 individual measurements of water quality were made at a total of 15 sites—4 in the Neuse River Basin and 11 in the Cape Fear River Basin. Thirty water-quality properties or constituents were measured; State water-quality thresholds exist for 11 of these.All observations met State water-quality thresholds for temperature, hardness, chloride, fluoride, sulfate, and nitrate plus nitrite.North Carolina water-quality thresholds were exceeded one or more times for dissolved oxygen, dissolved-oxygen percent saturation, pH, turbidity, and chlorophyll a.

  10. [Quality assurance concepts in intensive care medicine].

    PubMed

    Brinkmann, A; Braun, J P; Riessen, R; Dubb, R; Kaltwasser, A; Bingold, T M

    2015-11-01

    Intensive care medicine (ICM) is characterized by a high degree of complexity and requires intense communication and collaboration on interdisciplinary and multiprofessional levels. In order to achieve good quality of care in this environment and to prevent errors, a proactive quality and error management as well as a structured quality assurance system are essential. Since the early 1990s, German intensive care societies have developed concepts for quality management and assurance in ICM. In 2006, intensive care networks were founded in different states to support the implementation of evidence-based knowledge into clinical routine and to improve medical outcome, efficacy, and efficiency in ICM. Current instruments and concepts of quality assurance in German ICM include core intensive care data from the data registry DIVI REVERSI, quality indicators, peer review in intensive care, IQM peer review, and various certification processes. The first version of German ICM quality indicators was published in 2010 by an interdisciplinary and interprofessional expert commission. Key figures, indicators, and national benchmarks are intended to describe the quality of structures, processes, and outcomes in intensive care. Many of the quality assurance tools have proved to be useful in clinical practice, but nationwide implementation still can be improved.

  11. Quality assurance, training, and certification in ozone air pollution studies

    Treesearch

    Susan Schilling; Paul Miller; Brent Takemoto

    1996-01-01

    Uniform, or standard, measurement methods of data are critical to projects monitoring change to forest systems. Standardized methods, with known or estimable errors, contribute greatly to the confidence associated with decisions on the basis of field data collections (Zedaker and Nicholas 1990). Quality assurance (QA) for the measurement process includes operations and...

  12. Hanford Tanks Initiative quality assurance implementation plan

    SciTech Connect

    Huston, J.J.

    1998-06-23

    Hanford Tanks Initiative (HTI) Quality Assurance Implementation Plan for Nuclear Facilities defines the controls for the products and activities developed by HTI. Project Hanford Management Contract (PHMC) Quality Assurance Program Description (QAPD)(HNF-PRO599) is the document that defines the quality requirements for Nuclear Facilities. The QAPD provides direction for compliance to 10 CFR 830.120 Nuclear Safety Management, Quality Assurance Requirements. Hanford Tanks Initiative (HTI) is a five-year activity resulting from the technical and financial partnership of the US Department of Energy`s Office of Waste Management (EM-30), and Office of Science and Technology Development (EM-50). HTI will develop and demonstrate technologies and processes for characterization and retrieval of single shell tank waste. Activities and products associated with HTI consist of engineering, construction, procurement, closure, retrieval, characterization, and safety and licensing.

  13. 40 CFR Appendix A to Part 58 - Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ARM; (d) The use of calibration standards traceable to NIST or other primary standard; (e) Performance... monitoring may not commence at the beginning of a calendar quarter. 1.1.2The annual performance evaluations... organization depend on a number of local factors such as field and laboratory conditions, the objectives for...

  14. Ensuring Quality Assurance in Vocational Education

    ERIC Educational Resources Information Center

    Idialu, Ethel E.

    2013-01-01

    Vocational education emphasises skill acquisition. Quality assurance in vocational education is a concept that is concerned with high performance involving activities with vocational education such as teaching, learning, infrastructures, students' behaviour and the entire academic process. Quality vocational education refers to input and output of…

  15. Quality Assurance in Distance Learning Libraries

    ERIC Educational Resources Information Center

    Tripathi, Manorama; Jeevan, V. K. J.

    2009-01-01

    Purpose: The paper aims to study how the present distance learning libraries can improve upon their existing services and introduce new ones to enhance quality of services to distance learners. Design/methodology/approach: The paper includes a review of literature on quality assurance in open and distance education in general and student support…

  16. The New English Quality Assurance Regime

    ERIC Educational Resources Information Center

    Brown, Roger

    2011-01-01

    England is developing a new quality assurance regime that will come into effect in October 2011. A new funding regime will operate from the following year, together with new rules to ease the participation of private higher education providers. This article describes and analyses the new quality and funding regimes. It argues that the greater…

  17. ENHANCING SCIENTIFIC COLLABORATION THROUGH QUALITY ASSURANCE

    EPA Science Inventory

    The basic features of the Quality Assurance Program have been in existence since the early 1980's, but this poster will highlight some topics that have emerged more recently, in particular the Agency's laboratory competency policy, the information quality guidelines, and scientif...

  18. Quality Assurance in University Guidance Services

    ERIC Educational Resources Information Center

    Simon, Alexandra

    2014-01-01

    In Europe there is no common quality assurance framework for the delivery of guidance in higher education. Using a case study approach in four university career guidance services in England, France and Spain, this article aims to study how quality is implemented in university career guidance services in terms of strategy, standards and models,…

  19. ENHANCING SCIENTIFIC COLLABORATION THROUGH QUALITY ASSURANCE

    EPA Science Inventory

    The basic features of the Quality Assurance Program have been in existence since the early 1980's, but this poster will highlight some topics that have emerged more recently, in particular the Agency's laboratory competency policy, the information quality guidelines, and scientif...

  20. Quality Assurance in Distance Learning Libraries

    ERIC Educational Resources Information Center

    Tripathi, Manorama; Jeevan, V. K. J.

    2009-01-01

    Purpose: The paper aims to study how the present distance learning libraries can improve upon their existing services and introduce new ones to enhance quality of services to distance learners. Design/methodology/approach: The paper includes a review of literature on quality assurance in open and distance education in general and student support…

  1. Quality Assurance in a Children's Psychiatric Hospital.

    ERIC Educational Resources Information Center

    Baggish, Rosemary C.; And Others

    1981-01-01

    Examined the use of short-term isolation (STI) in a children's psychiatric hospital. The Joint Commission on Accreditation of Hospitals quality assurance mode was used. Studied the quality use of STI and its documentation. Data gathered served as the basis for recommendations that led to planned, informed program changes. (Author)

  2. Quality Assurance in University Guidance Services

    ERIC Educational Resources Information Center

    Simon, Alexandra

    2014-01-01

    In Europe there is no common quality assurance framework for the delivery of guidance in higher education. Using a case study approach in four university career guidance services in England, France and Spain, this article aims to study how quality is implemented in university career guidance services in terms of strategy, standards and models,…

  3. The New English Quality Assurance Regime

    ERIC Educational Resources Information Center

    Brown, Roger

    2011-01-01

    England is developing a new quality assurance regime that will come into effect in October 2011. A new funding regime will operate from the following year, together with new rules to ease the participation of private higher education providers. This article describes and analyses the new quality and funding regimes. It argues that the greater…

  4. Analytical quality assurance in veterinary drug residue analysis methods: matrix effects determination and monitoring for sulfonamides analysis.

    PubMed

    Hoff, Rodrigo Barcellos; Rübensam, Gabriel; Jank, Louise; Barreto, Fabiano; Peralba, Maria do Carmo Ruaro; Pizzolato, Tânia Mara; Silvia Díaz-Cruz, M; Barceló, Damià

    2015-01-01

    In residue analysis of veterinary drugs in foodstuff, matrix effects are one of the most critical points. This work present a discuss considering approaches used to estimate, minimize and monitoring matrix effects in bioanalytical methods. Qualitative and quantitative methods for estimation of matrix effects such as post-column infusion, slopes ratios analysis, calibration curves (mathematical and statistical analysis) and control chart monitoring are discussed using real data. Matrix effects varying in a wide range depending of the analyte and the sample preparation method: pressurized liquid extraction for liver samples show matrix effects from 15.5 to 59.2% while a ultrasound-assisted extraction provide values from 21.7 to 64.3%. The matrix influence was also evaluated: for sulfamethazine analysis, losses of signal were varying from -37 to -96% for fish and eggs, respectively. Advantages and drawbacks are also discussed considering a workflow for matrix effects assessment proposed and applied to real data from sulfonamides residues analysis.

  5. The quality assurance role in the Deep Space Network

    NASA Technical Reports Server (NTRS)

    Sirpilla, R. L.

    1981-01-01

    The quality assurance section provides skilled personnel who perform the following functions: quality hardware engineering, quality software engineering, inspection and testing, and an independent assessment to quality, engineering and project requirements. The quality assurance section provides specifications, workmanship standards, process specifications and quality assurance procedures in support of DSN equipment. In addition, the quality assurance section reviews DSN engineering documents to ensure that appropriate and adequate quality provisions are included.

  6. Maximising responses to quality assurance surveys.

    PubMed

    Ahearn, David; Bhat, Sarita; Lakinson, Tracey; Baker, Paul

    2011-12-01

    In the UK all postgraduate trainees complete an annual online quality assurance survey. If the response rate is poor, then this has significant implications for the validity and usefulness of the data collected. In this article we address the issue of survey response rates, with particular reference to quality assurance surveys, although the principles can be applied generally. We have employed mostly evidence-based techniques (predominantly from general survey literature rather than published medical education work). We list the techniques that we have employed. These include a five-stage process of repeated and incremental contact with those who do not complete the survey, backed up by personal contact with an influential figure. Stressing the importance of completing the survey, assuring responses are confidential and keeping the invitation email brief are examples of the techniques used. Over a 3-year period we have managed to improve the response rate from 57 per cent to over 80 per cent. We note that role models remain the single most important determinant of medical behaviour, and that if they embrace quality assurance, trainees will too. It is important to employ and build upon the existing literature within the survey methodology. By doing this we can enhance the response rate and validity of future quality assurance surveys, thus reinforcing their role as a key tool as we strive to maximise the effectiveness of interventions in postgraduate medical education. © Blackwell Publishing Ltd 2011.

  7. 40 CFR Appendix A to Part 58 - Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... Table A-1 of this appendix summarizes the major similarities and differences of the requirements for... differences discussed in this section, and in Table A-1 of this appendix will be expected to be followed by... authority. 1.4Assessments and Reports. Periodic assessments and documentation of data quality are required...

  8. Cardiac catheterization laboratory imaging quality assurance program.

    PubMed

    Wondrow, M A; Laskey, W K; Hildner, F J; Cusma, J; Holmes, D R

    2001-01-01

    With the recent approval of the National Electrical Manufacturers Association (NEMA) standard for "Characteristics of and Test Procedures for a Phantom to Benchmark Cardiac Fluoroscopic and Photographic Performance," comprehensive cardiac image assurance control programs are now possible. This standard was developed by a joint NEMA/Society for Cardiac Angiography and Interventions (SCA&I) working group of imaging manufacturers and cardiology society professionals over the past 4 years. This article details a cardiac catheterization laboratory image quality assurance and control program that includes the new standard along with current regulatory requirements for cardiac imaging. Because of the recent proliferation of digital imaging equipment, quality assurance for cardiac imaging fluoroscopy and digital imaging are critical. Included are the previous works recommended by the American College of Cardiology (ACC) and American Heart Association (AHA), Society for Cardiac Angiographers and Interventions (SCA&I), and authors of previous image quality subjects.

  9. RTOG quality assurance guidelines for interstitial hyperthermia.

    PubMed

    Emami, B; Stauffer, P; Dewhirst, M W; Prionas, S; Ryan, T; Corry, P; Herman, T; Kapp, D S; Myerson, R J; Samulski, T

    1991-05-01

    This document specifies the current recommendations for quality assurance for hyperthermia administration with interstitial techniques as specified by the Radiation Therapy Oncology Group (RTOG). The document begins by providing a brief description of the physical principles behind the use of the three most commonly used methods of interstitial hyperthermia: radiofrequency (RF-LCF), microwave antennas, and ferromagnetic seeds. Emphasis is placed on features that effect quality assurance. Specific recommendations are provided for: a) Pretreatment planning and equipment performance checks, b) Implant considerations and documentation, c) Thermometry, and d) Safety procedures. Specific details regarding quality assurance issues that are common to all local and regional hyperthermia methods are outlined in previous documents sponsored by the RTOG. It is anticipated that technological advances may lead to future modifications of this document.

  10. Quality assurance FY 1995 site support program plan WBS 6.7.2.5

    SciTech Connect

    Dell, L.D.

    1994-09-01

    This report is a summary of the quality assurance plan and program for the Westinghouse Hanford Company. The quality assurance plan verifies that the appropriate quality assurance programs and controls are applied to activities that affect quality related to work in: waste management; environmental activities (restoration, remediation, and monitoring); implementation of environmental, state, local, and federal regulations; tri-party agreement activities; facility operation and deactivation/transition to shutdown; new facility construction and operation.

  11. 48 CFR 37.604 - Quality assurance surveillance plans.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... surveillance plans. 37.604 Section 37.604 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance plans are in Subpart 46.4. The Government may either prepare the quality assurance surveillance plan or...

  12. 48 CFR 37.604 - Quality assurance surveillance plans.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... surveillance plans. 37.604 Section 37.604 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance plans are in Subpart 46.4. The Government may either prepare the quality assurance surveillance plan or...

  13. Statistical process control for radiotherapy quality assurance.

    PubMed

    Pawlicki, Todd; Whitaker, Matthew; Boyer, Arthur L

    2005-09-01

    Every quality assurance process uncovers random and systematic errors. These errors typically consist of many small random errors and a very few number of large errors that dominate the result. Quality assurance practices in radiotherapy do not adequately differentiate between these two sources of error. The ability to separate these types of errors would allow the dominant source(s) of error to be efficiently detected and addressed. In this work, statistical process control is applied to quality assurance in radiotherapy for the purpose of setting action thresholds that differentiate between random and systematic errors. The theoretical development and implementation of process behavior charts are described. We report on a pilot project is which these techniques are applied to daily output and flatness/symmetry quality assurance for a 10 MV photon beam in our department. This clinical case was followed over 52 days. As part of our investigation, we found that action thresholds set using process behavior charts were able to identify systematic changes in our daily quality assurance process. This is in contrast to action thresholds set using the standard deviation, which did not identify the same systematic changes in the process. The process behavior thresholds calculated from a subset of the data detected a 2% change in the process whereas with a standard deviation calculation, no change was detected. Medical physicists must make decisions on quality assurance data as it is acquired. Process behavior charts help decide when to take action and when to acquire more data before making a change in the process.

  14. Compliance Assurance Monitoring Technical Guidance Document Appendices by Control Technique

    EPA Pesticide Factsheets

    Compliance assurance monitoring is intended to provide a reasonable assurance of compliance with applicable requirements under the Clean Air Act for large emission units that rely on pollution control device equipment to achieve compliance.

  15. Compliance Assurance Monitoring Technical Guidance Document Appendices by Pollutant

    EPA Pesticide Factsheets

    Compliance assurance monitoring is intended to provide a reasonable assurance of compliance with applicable requirements under the Clean Air Act for large emission units that rely on pollution control device equipment to achieve compliance.

  16. Quality Assurance Source Requirements Traceability Database

    SciTech Connect

    MURTHY, R., NAYDENOVA, A., DEKLEVER, R., BOONE, A.

    2006-01-30

    At the Yucca Mountain Project the Project Requirements Processing System assists in the management of relationships between regulatory and national/industry standards source criteria, and Quality Assurance Requirements and Description document (DOE/R W-0333P) requirements to create compliance matrices representing respective relationships. The matrices are submitted to the U.S. Nuclear Regulatory Commission to assist in the commission's review, interpretation, and concurrence with the Yucca Mountain Project QA program document. The tool is highly customized to meet the needs of the Office of Civilian Radioactive Waste Management Office of Quality Assurance.

  17. Technical note: preventive maintenance quality assurance.

    PubMed

    Russell, D

    1992-01-01

    Performance improvements in healthcare and, specifically, in clinical engineering are required by the Joint Commission on the Accreditation of Healthcare Organizations' Plant Technology and Safety Management (PTSM) documents. The goals of healthcare service quality assurance are to establish performance requirements and improve patient outcomes. It is important that these goals be kept in the forefront of the design of clinical engineering quality assurance planning. Indicator/threshold pairs must be carefully chosen on the basis of some logical relation to the desired goals of the overall program.

  18. The changing role of quality assurance in the pharmaceutical industry.

    PubMed

    Kieffer, Robert G

    2014-01-01

    ICH Q10. Pharmaceutical Quality System emphasizes that senior management is responsible for the quality system. Thus, it is not the quality assurance organization that has the primary responsibility for the quality system. With this shift of responsibilities, what can quality assurance do to help senior management fulfill their responsibility? How can quality assurance be more proactive, add more value? What new skills does quality assurance need to have in order to perform its new role? This article attempts to answer these questions.

  19. Quality Assurance in the Presence of Variability

    NASA Astrophysics Data System (ADS)

    Lauenroth, Kim; Metzger, Andreas; Pohl, Klaus

    Software Product Line Engineering (SPLE) is a reuse-driven development paradigm that has been applied successfully in information system engineering and other domains. Quality assurance of the reusable artifacts of the product line (e.g. requirements, design, and code artifacts) is essential for successful product line engineering. As those artifacts are reused in several products, a defect in a reusable artifact can affect several products of the product line. A central challenge for quality assurance in product line engineering is how to consider product line variability. Since the reusable artifacts contain variability, quality assurance techniques from single-system engineering cannot directly be applied to those artifacts. Therefore, different strategies and techniques have been developed for quality assurance in the presence of variability. In this chapter, we describe those strategies and discuss in more detail one of those strategies, the so called comprehensive strategy. The comprehensive strategy aims at checking the quality of all possible products of the product line and thus offers the highest benefits, since it is able to uncover defects in all possible products of the product line. However, the central challenge for applying the comprehensive strategy is the complexity that results from the product line variability and the large number of potential products of a product line. In this chapter, we present one concrete technique that we have developed to implement the comprehensive strategy that addresses this challenge. The technique is based on model checking technology and allows for a comprehensive verification of domain artifacts against temporal logic properties.

  20. Quality Assurance: An Educational Approach.

    ERIC Educational Resources Information Center

    Griffith, Nancy L.; Megel, Mary Erickson

    1981-01-01

    Describes a course designed to give students the theoretical and practical knowledge to understand the factors influencing the provision of quality nursing care; to use standards to evaluate nursing care; and to make planning changes to improvement. (Author)

  1. Revision 2 of the Enbridge Quality Assurance Project Plan

    EPA Pesticide Factsheets

    This Quality Assurance Project Plan (QAPP) presents Revision 2 of the organization, objectives, planned activities, and specific quality assurance/quality control (QA/QC) procedures associated with the Enbridge Marshall Pipeline Release Project.

  2. SWMM 5 REDEVELOPMENT QUALITY ASSURANCE PROGRAM

    EPA Science Inventory

    EPA recently released a new version of the Storm Water Management Model (SWMM) that combines a new interface with a completely re-written computational engine. The SWMM redevelopment project proceeded under a Quality Assurance Project Plan (QAPP) that describes methods and proced...

  3. Quality Assurance of University Education: Whose Responsibility?

    ERIC Educational Resources Information Center

    Ibijola, Elizabeth Yinka

    2015-01-01

    This study sought the opinion of stakeholders in university education, to know who should be responsible for quality assurance of university education in Nigeria. Descriptive research of survey design was employed in the study. The population consisted of all public university staff members, students and the employers of Nigerian university…

  4. Quality Assurance Program: Beginning Teacher Warranty.

    ERIC Educational Resources Information Center

    Barr, Robert D.

    This report discusses the Quality Assurance Program at the OSU/WOSC School of Education, a merged school serving Oregon State University and Western Oregon State College. This major reform in teacher education is designed to bring a high level of accountability to teacher education and is called a "Warranty of First-Year Teachers." If,…

  5. Quality Assurance Program Development--Curriculum Development.

    ERIC Educational Resources Information Center

    Wisconsin Indianhead Technical Coll., Shell Lake.

    This document has two parts: (1) course outlines and unit lesson plans for 10 vocational courses; and (2) course descriptions. competencies, and topical outlines for 7 courses in a quality assurance curriculum. In the first part, outlines and unit lesson plans are provided for the following courses: standards and specifications, materials, basic…

  6. Quality Assurance in Higher Education in Zimbabwe

    ERIC Educational Resources Information Center

    Garwe, Evelyn Chiyevo

    2014-01-01

    The purpose of this paper is to furnish local and global stakeholders with detailed information regarding the development and current status of quality assurance in the Zimbabwean higher education sector. The study used document analysis, observation and interviews with key informants as sources of data. This paper addresses the dearth of…

  7. Quality Assurance in Distance and Open Learning

    ERIC Educational Resources Information Center

    Mahafzah, Mohammed Hasan

    2012-01-01

    E-learning has become an increasingly important teaching and learning mode in educational institutions and corporate training. The evaluation of E-learning, however, is essential for the quality assurance of E-learning courses. This paper constructs a three-phase evaluation model for E-learning courses, which includes development, process, and…

  8. Software quality assurance plan for GCS

    NASA Technical Reports Server (NTRS)

    Duncan, Stephen E.; Bailey, Elizabeth K.

    1990-01-01

    The software quality assurance (SQA) function for the Guidance and Control Software (GCS) project which is part of a software error studies research program is described. The SQA plan outlines all of the procedures, controls, and audits to be carried out by the SQA organization to ensure adherence to the policies, procedures, and standards for the GCS project.

  9. Quality Assurance in Turkish Higher Education

    ERIC Educational Resources Information Center

    Bugday Ince, Sehriban; Gounko, Tatiana

    2014-01-01

    The implementation of quality assurance (QA) is one of the most challenging reform areas for Turkey due to the unique organization of its higher education system. This paper explores the development of QA systems in Turkish universities. Using a qualitative case study approach, the authors examine how Turkey accomplishes the goal of implementing…

  10. On Internationalisation, Student Mobility and Quality Assurance.

    ERIC Educational Resources Information Center

    van Overbeek, Marjan

    1997-01-01

    Reports on a Dutch study examining qualitative aspects of internationalization in Dutch higher education institutions, and examines the ways Dutch institutions evaluate Dutch students' academic experiences abroad. Raises the question of whether existing systems meet stated standards for quality assurance. Makes some recommendations for…

  11. Effectiveness of Quality Assurance Training for Youth.

    ERIC Educational Resources Information Center

    Nold, Rosie; Hanson, Dana

    2001-01-01

    A quality assurance program was designed to teach youth about safe and wholesome food production, animal management techniques, and ethical decision making related to food animal production. Participants gained skills in animal management techniques and their opinions about consumer expectations were positively influenced. The program successfully…

  12. Quality Assurance: Enhancing or Threatening Higher Education?

    ERIC Educational Resources Information Center

    Taousanidis, Nikolaos I.; Antoniadou, Myrofora A.

    2010-01-01

    There is an increasing marketization of commodity services and, the authors argue, higher education is suffering heavily from this trend. Higher education institutions (HEIs) are currently subject to quality assurance and other externally imposed procedures that have been successfully applied in the private sector. This article analyses the…

  13. Quality Assurance: Enhancing or Threatening Higher Education?

    ERIC Educational Resources Information Center

    Taousanidis, Nikolaos I.; Antoniadou, Myrofora A.

    2010-01-01

    There is an increasing marketization of commodity services and, the authors argue, higher education is suffering heavily from this trend. Higher education institutions (HEIs) are currently subject to quality assurance and other externally imposed procedures that have been successfully applied in the private sector. This article analyses the…

  14. SWMM 5 REDEVELOPMENT QUALITY ASSURANCE PROGRAM

    EPA Science Inventory

    EPA recently released a new version of the Storm Water Management Model (SWMM) that combines a new interface with a completely re-written computational engine. The SWMM redevelopment project proceeded under a Quality Assurance Project Plan (QAPP) that describes methods and proced...

  15. Quality Assurance in VET. Review of Research.

    ERIC Educational Resources Information Center

    Hager, Paul

    Research on quality assurance (QA) in vocational education and training (VET) in Australia over the past 6 years was reviewed. Three factors responsible for growing interest in QA were identified: close connections with industry sectors that have gained from the introduction of QA measures; the more competitive training market that has been…

  16. Quality Assurance in Turkish Higher Education

    ERIC Educational Resources Information Center

    Bugday Ince, Sehriban; Gounko, Tatiana

    2014-01-01

    The implementation of quality assurance (QA) is one of the most challenging reform areas for Turkey due to the unique organization of its higher education system. This paper explores the development of QA systems in Turkish universities. Using a qualitative case study approach, the authors examine how Turkey accomplishes the goal of implementing…

  17. Effectiveness of Quality Assurance Training for Youth.

    ERIC Educational Resources Information Center

    Nold, Rosie; Hanson, Dana

    2001-01-01

    A quality assurance program was designed to teach youth about safe and wholesome food production, animal management techniques, and ethical decision making related to food animal production. Participants gained skills in animal management techniques and their opinions about consumer expectations were positively influenced. The program successfully…

  18. Quality Assurance in Distance Education.

    ERIC Educational Resources Information Center

    Zuniga, Etter; Krauth, Barbara

    1996-01-01

    This publication is one of a series designed as a companion to the Western Interstate Commission for Higher Education (WICHE)'s fact book, "Policy Indicators for Higher Education: WICHE States." The title article maintains that the growth of distance learning programs has heightened existing concerns about their quality. Institutions can…

  19. 222-S laboratory quality assurance plan

    SciTech Connect

    Meznarich, H.K.

    1995-04-01

    This document provides quality assurance guidelines and quality control requirements for analytical services. This document is designed on the basis of Hanford Analytical Services Quality Assurance Plan (HASQAP) technical guidelines and is used for governing 222-S and 222-SA analytical and quality control activities. The 222-S Laboratory provides analytical services to various clients including, but not limited to, waste characterization for the Tank Waste Remediation Systems (TWRS), waste characterization for regulatory waste treatment, storage, and disposal (TSD), regulatory compliance samples, radiation screening, process samples, and TPA samples. A graded approach is applied on the level of sample custody, QC, data verification, and data reporting to meet the specific needs of the client.

  20. [Quality assurance in geriatric rehabilitation--approaches and methods].

    PubMed

    Deckenbach, B; Borchelt, M; Steinhagen-Thiessen, E

    1997-08-01

    It did not take the provisions of the 5th Book of the Social Code for quality assurance issues to gain significance in the field of geriatric rehabilitation as well. While in the surgical specialties, experience in particular with external quality assurance have already been gathered over several years now, suitable concepts and methods for the new Geriatric Rehabilitation specialty are still in the initial stages of development. Proven methods from the industrial and service sectors, such as auditing, monitoring and quality circles, can in principle be drawn on for devising geriatric rehabilitation quality assurance schemes; these in particular need to take into account the multiple factors influencing the course and outcome of rehabilitation entailed by multimorbidity and multi-drug use; the eminent role of the social environment; therapeutic interventions by a multidisciplinary team; as well as the multi-dimensional nature of rehabilitation outcomes. Moreover, the specific conditions of geriatric rehabilitation require development not only of quality standards unique to this domain but also of quality assurance procedures specific to geriatrics. Along with a number of other methods, standardized geriatric assessment will play a crucial role in this respect.

  1. Quality assurance in small plating shops

    SciTech Connect

    McNabb, W.J. )

    1993-10-01

    The potential for electroless nickel coatings in oilfield and petrochemical applications is quite high. The greatest obstacle to their use has been a reputation for poor quality due to a lack of quality control in many plating shops. To overcome this, electroless nickel shops should not only have a quality control program in their operation, but must also document its use and success. This article describes how a plating shoe can develop the necessary procedures, manuals, and paperwork trail to offer quality assurance and to satisfy customers.

  2. 10 CFR 830.122 - Quality assurance criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Quality assurance criteria. 830.122 Section 830.122 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.122 Quality assurance...) Criterion 3—Management/Quality Improvement. (1) Establish and implement processes to detect and...

  3. 10 CFR 830.122 - Quality assurance criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Quality assurance criteria. 830.122 Section 830.122 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.122 Quality assurance...) Criterion 3—Management/Quality Improvement. (1) Establish and implement processes to detect and...

  4. 10 CFR 830.121 - Quality Assurance Program (QAP).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality... the Quality Assurance criteria in § 830.122. (b) The contractor responsible for a DOE nuclear...

  5. 10 CFR 830.121 - Quality Assurance Program (QAP).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality... the Quality Assurance criteria in § 830.122. (b) The contractor responsible for a DOE nuclear...

  6. ALMA quality assurance: concepts, procedures, and tools

    NASA Astrophysics Data System (ADS)

    Chavan, A. M.; Tanne, S. L.; Akiyama, E.; Kurowski, R.; Randall, S.; Vila Vilaro, B.; Villard, E.

    2016-07-01

    Data produced by ALMA for the community undergoes a rigorous quality assurance (QA) process, from the initial observation ("QA0") to the final science-ready data products ("QA2"), to the QA feedback given by the Principal Investigators (PIs) when they receive the data products ("QA3"). Calibration data is analyzed to measure the performance of the observatory and predict the trend of its evolution ("QA1"). The procedure develops over different steps and involves several actors across all ALMA locations; it is made possible by the support given by dedicated software tools and a complex database of science data, meta-data and operational parameters. The life-cycle of each involved entity is well-defined, and it prevents for instance that "bad" data (that is, data not meeting the minimum quality standards) is ever processed by the ALMA pipeline. This paper describes ALMA's quality assurance concepts and procedures, including the main enabling software components.

  7. [Quality assurance in occupational health services].

    PubMed

    Michalak, J

    1996-01-01

    The general conditions influencing the quality assurance and audit in Polish occupational health services are presented. The factors promoting or hampering the implementation of quality assurance and audits are also discussed. The major influence on the transformation of Polish occupational health services in exorted by employers who are committed to cover the costs of the obligatory prophylactic examination of their employees. This is the factor which also contributes to the improvement of quality if services. The definitions of the most important terms are reviewed to highlight their accordance with the needs of occupational health services in Poland. The examples of audit are presented and the elements of selected methods of auditing are suggested to be adopted in Poland.

  8. Quality Assurance Framework for Mini-Grids

    SciTech Connect

    Baring-Gould, Ian; Burman, Kari; Singh, Mohit; Esterly, Sean; Mutiso, Rose; McGregor, Caroline

    2016-11-01

    Providing clean and affordable energy services to the more than 1 billion people globally who lack access to electricity is a critical driver for poverty reduction, economic development, improved health, and social outcomes. More than 84% of populations without electricity are located in rural areas where traditional grid extension may not be cost-effective; therefore, distributed energy solutions such as mini-grids are critical. To address some of the root challenges of providing safe, quality, and financially viable mini-grid power systems to remote customers, the U.S. Department of Energy (DOE) teamed with the National Renewable Energy Laboratory (NREL) to develop a Quality Assurance Framework (QAF) for isolated mini-grids. The QAF for mini-grids aims to address some root challenges of providing safe, quality, and affordable power to remote customers via financially viable mini-grids through two key components: (1) Levels of service: Defines a standard set of tiers of end-user service and links them to technical parameters of power quality, power availability, and power reliability. These levels of service span the entire energy ladder, from basic energy service to high-quality, high-reliability, and high-availability service (often considered 'grid parity'); (2) Accountability and performance reporting framework: Provides a clear process of validating power delivery by providing trusted information to customers, funders, and/or regulators. The performance reporting protocol can also serve as a robust monitoring and evaluation tool for mini-grid operators and funding organizations. The QAF will provide a flexible alternative to rigid top-down standards for mini-grids in energy access contexts, outlining tiers of end-user service and linking them to relevant technical parameters. In addition, data generated through implementation of the QAF will provide the foundation for comparisons across projects, assessment of impacts, and greater confidence that will drive

  9. Quality assurance in the health care industry.

    PubMed

    Guth, Kim Ann; Kleiner, Brian

    2005-01-01

    The purpose of this article is to explore the quality assurance methods commonly used in the health care industry. Factors that influence the delivery of quality patient care is explored as well as factors that affect implementation of quality control measures. The importance of quality patient care to the economic success of the health care industry is described. Quality improvement efforts that are utilized by health care institutions are described including: independent performance audits, internal audits, outcomes analysis, consumer reports, industry guidelines, and consumer satisfaction surveys. Highly effective hospital managers exhibit management roles, behaviors, and a range of activities that correlate strongly to institutional commitment to quality and improved patient care outcomes. By reinforcing their involvement in quality improvement efforts, hospital managers were able to enhance their effectiveness in promoting and sustaining quality care.

  10. Quality assurance report. EMAP, Virginian province, 1990-1993

    SciTech Connect

    Strobel, C.J.; Valente, R.M.; Keith, D.; Summers, K.; LiVolsi, J.

    1995-09-01

    The report documents the results of Quality Assurance activities conducted in conjunction with sampling performed by EPA`s Environmental Monitoring and Assessment Program`s Estuaries study (EMAP-Estuaries) in the Virginian Province from 1990 through 1993. This report discusses the results of Quality Assurance activities by indicator, data qualifier flags, data quality, and, where appropriate, discuss lessons learned, and proposes changes or solutions to improve data quality. A total of 446 Base Sampling Sites were scheduled for sampling over this period. Twenty one stations were eliminated due to inadequate water depth or logistical concerns. Some significant problems were encountered in the chemical analysis of sediment samples resulting in the deletion of some data from the database. The specific problems and a discussion of the data deleted or qualified are included in this report.

  11. 78 FR 7816 - Quality Assurance Program Requirements (Operations)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-04

    ... COMMISSION Quality Assurance Program Requirements (Operations) AGENCY: Nuclear Regulatory Commission. ACTION... issuing for public comment draft regulatory guide (DG), DG-1300, ``Quality Assurance Program Requirements...'s Agencywide Documents Access and Management System (ADAMS): You may access...

  12. 7 CFR 56.39 - Quality assurance inspector required.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... supervision of a grader or quality assurance inspector. The grader or quality assurance inspector shall have.... 14, 1977. Redesignated at 42 FR 32514, June 27, 1977, as amended at 46 FR 39570, Aug. 4,...

  13. 7 CFR 56.39 - Quality assurance inspector required.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... supervision of a grader or quality assurance inspector. The grader or quality assurance inspector shall have.... 14, 1977. Redesignated at 42 FR 32514, June 27, 1977, as amended at 46 FR 39570, Aug. 4,...

  14. Now & Then: Ingrid Proctor-Fridia: Quality Assurance Representative.

    ERIC Educational Resources Information Center

    Barnes, Sue; Michalowicz, Karen Dee

    1995-01-01

    Describes the use of geometry now by a U.S. Department of Defense quality assurance representative and in ancient times by the Egyptians and Babylonians. Includes reproducible student worksheets on quality assurance. (MKR)

  15. 7 CFR 90.102 - Quality assurance review.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS INTRODUCTION Quality Assurance § 90.102 Quality assurance review. (a) Each laboratory performing tests...

  16. The role of monitoring interpretive rates, concordance between cytotechnologist and pathologist interpretations before sign-out, and turnaround time in gynecologic cytology quality assurance: findings from the College of American Pathologists Gynecologic Cytopathology Quality Consensus Conference working group 1.

    PubMed

    Clary, Karen M; Davey, Diane D; Naryshkin, Sonya; Austin, R Marshall; Thomas, Nicole; Chmara, Beth Anne; Sugrue, Chiara; Tworek, Joseph

    2013-02-01

    The College of American Pathologists (CAP) conducted a national survey of gynecologic cytology quality assurance (QA) practices. Experts in gynecologic cytology were asked to join 5 working groups that studied the survey data on different aspects of QA. Evaluating the survey data and follow-up questions online, together with a review of pertinent literature, the working groups developed a series of preliminary statements on good laboratory practices in cytology QA. These were presented at a consensus conference and electronic voting occurred. To evaluate a set of QA monitors in gynecologic cytology. Working group 1 evaluated (1) monitoring interpretive rate categories for Papanicolaou tests (Pap tests), (2) concordance of cytotechnologist and pathologist interpretations before sign-out, and (3) turnaround time for Pap tests. The statements are based on a survey of gynecologic cytology QA practice patterns and of opinions from working group members and consensus conference attendees. The outcomes of this process demonstrate the current state of practice patterns in gynecologic cytology QA. Monitoring interpretive rates for all Bethesda System categories is potentially useful, and it is most useful to monitor interpretive rates for cytotechnologists individually and in comparison to the entire laboratory. Laboratories need to determine what level of discrepancy between cytotechnologist and pathologist interpretations of Pap tests is important to track. Laboratories should consider formalizing procedures and policies to adjudicate such discrepant interpretations. Turnaround time should be monitored in gynecologic cytology, but individual laboratories should determine how to measure and use turnaround time internally.

  17. Marketing and quality assurance: the two faces of Janus.

    PubMed

    Grimmer, K A; Dibden, M

    1992-01-01

    The relationship between quality assurance and marketing has been explored in workshops for physiotherapists. Quality assurance and marketing represent two sides of the same coin in health care. Quality assurance offers formal strategies with which to review performance, while marketing tools enable health professionals to assess the needs of the community within which they operate. Inherent in the concept of the interrelationship of marketing and quality assurance is that quality health care must reflect the changing demands of the consumers. Quality assurance and marketing techniques, performed interdependently, enable health professionals to provide quality, appropriate health care.

  18. Quality assurance in acid precipitation measurements

    SciTech Connect

    Campbell, S.; Scott, H.

    1985-06-01

    The growing interest in acid deposition has led to a proliferation of laboratories engaged in such studies. High-level quality assurance (QA) procedures are required for each program to standardize the diverse measurement methods in use and to determine the validity of differences in measurements widely separated in space and time. Both in-laboratory (quality control) and external (quality assurance) procedures are required. A complete QA program for acid precipitation measurements must address program objectives; site selection and operation; operator selection and training; sample collection, handling, and analyses; and data checking, storage, retrieval, and transmission. Objective criteria must be developed for detecting adulterated samples and invalid data. Appropriate laboratory and field blanks must be collected and analyzed. Standard techniques (sample spiking, replicate analysis of standards and samples) should ensure the reliability of analytical results. Relevant quality assurance data, including analytical detection limits, blank values, and the variability of replicate determinations, must be supplied with each data transmittal. Experimental information should be available upon request. The measurement of the pH of dilute solutions such as rain is particularly difficult; differences as large as 0.3 pH unit may be observed in replicate analyses of the same sample using different electrode types. Laboratory results are presented demonstrating typical variability to be expected in the collection, storage, and analysis of rainwater for major ions, including hydrogen ion. 15 references, 4 tables.

  19. Quality Assurance of Quality Assurance Agencies from an Asian Perspective: Regulation, Autonomy and Accountability

    ERIC Educational Resources Information Center

    Hou, Angela Yung-Chi; Ince, Martin; Tsai, Sandy; Chiang, Chung Lin

    2015-01-01

    As quality guardians of higher education, quality assurance agencies are required to guarantee the credibility of the review process and to ensure the objectivity and transparency of their decisions and recommendations. These agencies are therefore expected to use a range of internal and external approaches to prove the quality of their review…

  20. Quality Assurance of Quality Assurance Agencies from an Asian Perspective: Regulation, Autonomy and Accountability

    ERIC Educational Resources Information Center

    Hou, Angela Yung-Chi; Ince, Martin; Tsai, Sandy; Chiang, Chung Lin

    2015-01-01

    As quality guardians of higher education, quality assurance agencies are required to guarantee the credibility of the review process and to ensure the objectivity and transparency of their decisions and recommendations. These agencies are therefore expected to use a range of internal and external approaches to prove the quality of their review…

  1. Quality Assurance and Accreditation in Higher Education: India vis-à-vis European Countries

    ERIC Educational Resources Information Center

    Dey, Niradhar

    2011-01-01

    Quality assurance (QA) and accreditation in higher education include the systematic management and assessment of procedures to monitor performance and to address areas of improvement. In the context of globalization, without assuring the quality of higher education programmes it is not possible to ensure credit transfer and student mobility, to…

  2. Quality Assurance and Accreditation in Higher Education: India vis-à-vis European Countries

    ERIC Educational Resources Information Center

    Dey, Niradhar

    2011-01-01

    Quality assurance (QA) and accreditation in higher education include the systematic management and assessment of procedures to monitor performance and to address areas of improvement. In the context of globalization, without assuring the quality of higher education programmes it is not possible to ensure credit transfer and student mobility, to…

  3. An institutional review board-based clinical research quality assurance program.

    PubMed

    Lad, Pramod M; Dahl, Rebecca

    2013-01-01

    Despite the acknowledged importance of quality assurance in the clinical research process, the problem of how such a program should be implemented at the level of an academic teaching hospital or a similar institution has not been addressed in the literature. Despite the fact that quality assurance is expected in programs which certify and accredit Institutional Review Boards (IRBs), very little is known about the role of the IRB in programs of clinical research quality assurance. In this article we consider the definition of clinical research quality assurance, and describe a program designed to achieve it. The key elements of such a program are education at the site level, which has both mandatory and voluntary components, and an auditing and monitoring program, which reinforces the education on quality assurance. The role of the IRB in achieving the program goals and the organizational placement of the quality assurance program within the IRB structure and function are important items of discussion.

  4. Quality assurance in surgical oncology. Colorectal cancer as an example.

    PubMed

    Gunnarsson, Ulf

    2003-02-01

    Quality assurance in surgical oncology is a field of growing importance. National, regional and local systems have been built up in many countries. Often the quality assurance projects are linked to different registers. The advantage of such a link is the possibility of obtaining population-based data from unselected health care institutions. Few discussions of results from such projects have been published. Quality assurance of colorectal cancer surgery implies the development and use of systems for improvement all the way from detection of the cancer to the outcome as survival and patient satisfaction. To achieve this we must know what methods are being used and the outcome of our treatments. Designing processes for improvement necessitates careful planning, including decisions about end-points. Some crucial issues are discussed step-by-step in the present paper. In addition to auditing and providing collegial feedback, quality assurance is a tool for closing the gap between clinical practice and evidence based medicine and for creating new evidences as well as monitoring the introduction of new techniques and their effects.

  5. The implications of surgical quality assurance in cancer clinical trials.

    PubMed

    Haase, G M

    1994-11-01

    Prospective clinical trials are used to evaluate therapeutic interventions. Because surgery is involved in the diagnosis, staging, and therapy of solid malignancies, active surgical leadership in these cancer studies is important. There are currently barriers to widespread surgical participation in clinical trials. This report defines the obstacles as well as documents efforts to overcome them and improve surgical quality assurance in cooperative group research. The surgical leadership of several clinical cooperative groups sponsored by the National Cancer Institute (NCI) were interviewed. Cooperative group reports were analyzed with respect to internal audits, quality assurance and activities of surgical monitoring committees. Minutes from meetings of the NCI's workshops on "Surgeons in Clinical Trials" were reviewed. Six concerns present impediments to surgical quality in clinical trials. To address these, substantive surgical leadership is being developed throughout the cooperative group system. Surgical co-principal investigators for institutions and protocols are being appointed. Uniform surgical standards and operative guidelines are being developed. Surgical data review occur at the local institution as well as through central audits and surgical monitoring committees. Coordinators in surgical data management are being trained. Surgical education is organized at cooperative group meetings and disseminated to the surgical community by seminars, workshops, audiovisual teaching sessions, and scientific publications. Surgeons are playing increasing leadership roles in the cancer trials performed by cooperative groups. Surgical leaders are dedicated to a broad-scale quality assurance effort. Enhanced surgical commitment, widespread clinical participation, and focused leadership should affect a high level of surgical quality care in clinical trials research.

  6. Quality Assurance in Transnational Higher Education. ENQA Workshop Report 11

    ERIC Educational Resources Information Center

    Bennett, Paul; Bergan, Sjur; Cassar, Daniela; Hamilton, Marlene; Soinila, Michele; Sursock, Andree; Uvalic-Trumbic, Stamenka; Williams, Peter

    2010-01-01

    The present report is the product of an ENQA (European Association for Quality Assurance in Higher Education) Bologna Seminar "Quality Assurance in Transnational Education: from words to action" hosted by the Quality Assurance Agency (QAA, UK) in London in December, 2008. The seminar discussed the current trends in Transnational…

  7. Development of an Instructional Quality Assurance Model in Nursing Science

    ERIC Educational Resources Information Center

    Ajpru, Haruthai; Pasiphol, Shotiga; Wongwanich, Suwimon

    2011-01-01

    The purpose of this study was to develop an instructional quality assurance model in nursing science. The study was divided into 3 phases; (1) to study the information for instructional quality assurance model development (2) to develop an instructional quality assurance model in nursing science and (3) to audit and the assessment of the developed…

  8. 42 CFR 441.474 - Quality assurance and improvement plan.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Quality assurance and improvement plan. 441.474... improvement plan. (a) The State must provide a quality assurance and improvement plan that describes the State... pursue opportunities for system improvement. (b) The quality assurance and improvement plan shall also...

  9. Perspectives on Quality Assurance in Higher Education in Norway

    ERIC Educational Resources Information Center

    Lycke, Kirsten Hofgaard

    2004-01-01

    Quality assurance is well known internationally but the notion is relatively new in Norway. To understand some of the issues and dilemmas that emerge in the Norwegian reception of quality assurance in higher education, this article traces how quality assurance is gaining its form and how international trends are understood, transposed and adopted…

  10. Perspectives on Quality Assurance in Higher Education in Norway

    ERIC Educational Resources Information Center

    Lycke, Kirsten Hofgaard

    2004-01-01

    Quality assurance is well known internationally but the notion is relatively new in Norway. To understand some of the issues and dilemmas that emerge in the Norwegian reception of quality assurance in higher education, this article traces how quality assurance is gaining its form and how international trends are understood, transposed and adopted…

  11. Quality Assurance in Higher Education: Proposals for Consultation.

    ERIC Educational Resources Information Center

    Higher Education Funding Council for England, Bristol.

    This document sets out for consultation proposals for a revised method for quality assurance of teaching and learning in higher education. The proposals cover: (1) the objectives and principles of quality assurance; (2) an approach to quality assurance based on external audit principles; (3) the collection and publication of information; (4)…

  12. Single-Subject Evaluation: A Tool for Quality Assurance.

    ERIC Educational Resources Information Center

    Nuehring, Elane M.; Pascone, Anne B.

    1986-01-01

    The use of single-subject designs in peer review, in utilization review, and in other quality-assurance audits is encouraged. Presents an overview of the methodologies of single-subject designs and quality assurance, and provides examples of cases in which single-subject techniques furnished relevant quality assurance documentation. (Author/ABB)

  13. Quality Assurance in Higher Education: Proposals for Consultation.

    ERIC Educational Resources Information Center

    Higher Education Funding Council for England, Bristol.

    This document sets out for consultation proposals for a revised method for quality assurance of teaching and learning in higher education. The proposals cover: (1) the objectives and principles of quality assurance; (2) an approach to quality assurance based on external audit principles; (3) the collection and publication of information; (4)…

  14. Internal Quality Assurance System and Its Implementation in Kaunas College

    ERIC Educational Resources Information Center

    Misiunas, Mindaugas

    2007-01-01

    The article discusses the internal system of quality assurance and its implementation methods in Kaunas College. The issues of quality assurance are reviewed in the context of the European higher education area covering the three levels: European, national and institutional. The importance of quality assurance and its links with external…

  15. Quality Assurance of Assessment and Moderation Discourses Involving Sessional Staff

    ERIC Educational Resources Information Center

    Grainger, Peter; Adie, Lenore; Weir, Katie

    2016-01-01

    Quality assurance is a major agenda in tertiary education. The casualisation of academic work, especially in teaching, is also a quality assurance issue. Casual or sessional staff members teach and assess more than 50% of all university courses in Australia, and yet the research in relation to the role sessional staff play in quality assurance of…

  16. 10 CFR 71.135 - Quality assurance records.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance records. 71.135 Section 71.135 Energy... Assurance § 71.135 Quality assurance records. The licensee, certificate holder, and applicant for a CoC... include the instructions, procedures, and drawings required by § 71.111 to prescribe quality...

  17. 42 CFR 417.418 - Qualifying condition: Quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Qualifying condition: Quality assurance program... Qualifying condition: Quality assurance program. (a) Condition. The HMO or CMP must make arrangements for a quality assurance program that meets the requirements of this section. (b) Standard. An HMO or CMP...

  18. 38 CFR 46.6 - Medical quality assurance records confidentiality.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Medical quality assurance records confidentiality. 46.6 Section 46.6 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS... Medical quality assurance records confidentiality. Note that medical quality assurance records that...

  19. 40 CFR 792.35 - Quality assurance unit.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 33 2013-07-01 2013-07-01 false Quality assurance unit. 792.35 Section... ACT (CONTINUED) GOOD LABORATORY PRACTICE STANDARDS Organization and Personnel § 792.35 Quality assurance unit. (a) A testing facility shall have a quality assurance unit which shall be responsible...

  20. 49 CFR 180.505 - Quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Quality assurance program. 180.505 Section 180.505... MAINTENANCE OF PACKAGINGS Qualification and Maintenance of Tank Cars § 180.505 Quality assurance program. The quality assurance program requirements of § 179.7 of this subchapter apply....

  1. 48 CFR 2152.246-70 - Quality assurance requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Quality assurance... PRECONTRACT PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 2152.246-70 Quality assurance requirements. As prescribed by 2146.270-1 insert the following clause: Quality Assurance Requirements (OCT...

  2. 49 CFR 180.505 - Quality assurance program.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Quality assurance program. 180.505 Section 180.505 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Qualification and Maintenance of Tank Cars § 180.505 Quality assurance program. The quality assurance...

  3. 48 CFR 12.208 - Contract quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Contract quality assurance... Items 12.208 Contract quality assurance. Contracts for commercial items shall rely on contractors' existing quality assurance systems as a substitute for Government inspection and testing before tender...

  4. 49 CFR 180.505 - Quality assurance program.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Quality assurance program. 180.505 Section 180.505 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Qualification and Maintenance of Tank Cars § 180.505 Quality assurance program. The quality assurance...

  5. 10 CFR 63.144 - Quality assurance program change.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance program change. 63.144 Section 63.144 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes...

  6. Operational excellence (six sigma) philosophy: Application to software quality assurance

    SciTech Connect

    Lackner, M.

    1997-11-01

    This report contains viewgraphs on operational excellence philosophy of six sigma applied to software quality assurance. This report outlines the following: goal of six sigma; six sigma tools; manufacturing vs administrative processes; Software quality assurance document inspections; map software quality assurance requirements document; failure mode effects analysis for requirements document; measuring the right response variables; and questions.

  7. Quality Assurance of Assessment and Moderation Discourses Involving Sessional Staff

    ERIC Educational Resources Information Center

    Grainger, Peter; Adie, Lenore; Weir, Katie

    2016-01-01

    Quality assurance is a major agenda in tertiary education. The casualisation of academic work, especially in teaching, is also a quality assurance issue. Casual or sessional staff members teach and assess more than 50% of all university courses in Australia, and yet the research in relation to the role sessional staff play in quality assurance of…

  8. 10 CFR 74.59 - Quality assurance and accounting requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... NUCLEAR MATERIAL Formula Quantities of Strategic Special Nuclear Material § 74.59 Quality assurance and... licensee shall assure that the quality of SSNM measurement systems and material processing practices is... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance and accounting requirements....

  9. Quality Assurance in Postgraduate Education. ENQA Workshop Report 12

    ERIC Educational Resources Information Center

    Bitusikova, Alexandra; Bohrer, Janet; Borosic, Ivana; Costes, Nathalie; Edinsel, Kerim; Hollander, Karoline; Jacobsson, Gunilla; Jakopovic, Ivan Filip; Kearney, Mary-Louise; Mulder, Fred; Negyesi, Judith; Pietzonka, Manuel

    2010-01-01

    The present report follows an ENQA (European Association for Quality Assurance in Higher Education) Workshop on Quality Assurance and Postgraduate Education, hosted by the Romanian Agency for Quality Assurance in Higher Education (ARACIS) in Brasov, Romania on 12-13 March 2009. The workshop was an excellent opportunity for ENQA members to exchange…

  10. 40 CFR 265.19 - Construction quality assurance program.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 26 2014-07-01 2014-07-01 false Construction quality assurance program..., STORAGE, AND DISPOSAL FACILITIES General Facility Standards § 265.19 Construction quality assurance program. (a) CQA program. (1) A construction quality assurance (CQA) program is required for all surface...

  11. 40 CFR 264.19 - Construction quality assurance program.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Construction quality assurance program... FACILITIES General Facility Standards § 264.19 Construction quality assurance program. (a) CQA program. (1) A construction quality assurance (CQA) program is required for all surface impoundment, waste pile, and landfill...

  12. 48 CFR 12.208 - Contract quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Contract quality assurance... Items 12.208 Contract quality assurance. Contracts for commercial items shall rely on contractors' existing quality assurance systems as a substitute for Government inspection and testing before tender for...

  13. 40 CFR 265.19 - Construction quality assurance program.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Construction quality assurance program..., STORAGE, AND DISPOSAL FACILITIES General Facility Standards § 265.19 Construction quality assurance program. (a) CQA program. (1) A construction quality assurance (CQA) program is required for all surface...

  14. 49 CFR 180.505 - Quality assurance program.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Quality assurance program. 180.505 Section 180.505 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Qualification and Maintenance of Tank Cars § 180.505 Quality assurance program. The quality assurance program...

  15. 40 CFR 264.19 - Construction quality assurance program.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 26 2014-07-01 2014-07-01 false Construction quality assurance program... FACILITIES General Facility Standards § 264.19 Construction quality assurance program. (a) CQA program. (1) A construction quality assurance (CQA) program is required for all surface impoundment, waste pile, and landfill...

  16. 10 CFR 63.144 - Quality assurance program change.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance program change. 63.144 Section 63.144 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes to...

  17. 10 CFR 63.144 - Quality assurance program change.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance program change. 63.144 Section 63.144 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes to...

  18. 10 CFR 63.144 - Quality assurance program change.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance program change. 63.144 Section 63.144 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes to...

  19. 10 CFR 63.144 - Quality assurance program change.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance program change. 63.144 Section 63.144 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes to...

  20. 40 CFR 264.19 - Construction quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Construction quality assurance program... FACILITIES General Facility Standards § 264.19 Construction quality assurance program. (a) CQA program. (1) A construction quality assurance (CQA) program is required for all surface impoundment, waste pile, and...

  1. 40 CFR 265.19 - Construction quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Construction quality assurance program..., STORAGE, AND DISPOSAL FACILITIES General Facility Standards § 265.19 Construction quality assurance program. (a) CQA program. (1) A construction quality assurance (CQA) program is required for all...

  2. Quality Assurance and Quality Enhancement in Higher Education: Contested Territories?

    ERIC Educational Resources Information Center

    Filippakou, Ourania; Tapper, Ted

    2008-01-01

    This paper analyses the unfolding of the quality agenda in England from 1992 to the present. By using two disciplinary approaches, "political science" and "social philosophy", the article traces the recent transition from quality assurance to quality enhancement. How is this development to be explained and how significant is…

  3. University Administrators' Conceptions of Quality and Approaches to Quality Assurance

    ERIC Educational Resources Information Center

    Goff, Lori

    2017-01-01

    As the quality of university education garners increasingly more interest in both the public and in the literature, and as quality assurance (QA) processes are developed and implemented within universities around the world, it is important to carefully consider what is meant by the term quality. This study attempts to add to the literature…

  4. Quality Assurance and Quality Enhancement in Higher Education: Contested Territories?

    ERIC Educational Resources Information Center

    Filippakou, Ourania; Tapper, Ted

    2008-01-01

    This paper analyses the unfolding of the quality agenda in England from 1992 to the present. By using two disciplinary approaches, "political science" and "social philosophy", the article traces the recent transition from quality assurance to quality enhancement. How is this development to be explained and how significant is…

  5. Versatile transceiver production and quality assurance

    NASA Astrophysics Data System (ADS)

    Olantera, L.; Detraz, S.; Sigaud, C.; Soos, C.; Troska, J.; Vasey, F.; Zeiler, M.

    2017-01-01

    The Versatile Link project has developed a radiation-hard optical link for LHC phase 1 detector upgrades. The project has reached its final stage and we have launched in 2016 the production of the Versatile Transceivers and Versatile Twin Transmitters. This paper provides an update of the production status and a detailed description and results of the quality assurance programme, which includes qualification and acceptance testing at CERN and production testing at the manufacturers' premises.

  6. Comprehensive quality assurance for stereotactic radiosurgery treatments.

    PubMed

    Ramaseshan, R; Heydarian, M

    2003-07-21

    We have used a commercially available high precision Lucy phantom to perform comprehensive quality assurance for stereotactic radiosurgery treatments. The quantitative evaluation of system uncertainties included imaging, planning and treatment delivery systems. The quality assurance tests showed that the well-defined targets were identified to within +/-1 mm in all the imaging modalities. The pre-known target volumes were reproduced within 2 cm3 in both MR and CT. The planned target was delivered within 2% of the prescribed dose and to within 2 mm accuracy. The inaccuracy in the isocentre position at the Linac was less than 1.2 mm. The maximum error observed in the depth helmet was 0.5 mm and the overall uncertainty was within 0.23 mm. We have also established a quality assurance program based on the study and proposed the tolerance and the frequency of the tests required to be carried out. The tests were carried out using a Radionics planning system and delivered on a Varian Clinac 2100 linear accelerator machine. These tests also established a base line for future comparisons.

  7. The quality assurance program at K & S

    SciTech Connect

    Slowey, T.W.

    1993-12-31

    K & S operates the largest and one of the most comprehensive Accredited Dosimetry Calibration Laboratories (ADCLs) in the American Association of Physicists in Medicine (AAPM) secondary laboratory system. It offers calibrations covering energies from Grenz-Ray (0.03-mm Al) to cesium-137 and cobalt-60, brachytherapy source and well chamber calibrations for low-activity sources, and, recently, high-dose-rate iridium-192. The present Quality Assurance (QA) program at K & S began with the AAPM Guidelines for Accreditation (Task Group No. 22 and No. 3, 1989) and grew over the past 10 years to include all aspects of providing a private, self-supporting calibration service from a free-standing independent facility. Some aspects of the QA program were prompted by the requirements of the nuclear power industry while other parts were from national consensus standards or the experiences of staff. Redundancy and teamwork are the most important characteristics of this QA program. K & S has participated in a National Institute of Standards and Technology (NIST) measurement quality assurance (MQA) program since 1982, and, in recent years, an ADCL intralaboratory intercomparison was conducted by Task Group 3 of the Radiation Therapy Committee of the AAPM. One measure of the credibility of a QA program is consistent performance on the MQA program and the ADCL intercomparisons over the past 10 years. An equally important measure of the ability of a program to assure quality results is the frequency of reported errors.

  8. Quality Assurance/Quality Control Jobs

    NASA Astrophysics Data System (ADS)

    Fanslau, Melody; Young, Janelle

    The production of a quality and safe food product is essential to the success of any food manufacturing facility. Because of this great importance, a career in quality can be extremely rewarding. Without happy customers willing to buy a product, a company would not be able to survive. Quality issues such as foreign objects, spoiled or mislabeled product, failure to meet net weight requirements, or a recall can all turn customers away from buying a product. The food industry is a customer-driven market in which some consumers are brand loyal based on a history of high quality or in which a single bad experience with a product will turn them away for a lifetime. With this said, the main role of a quality department is to help ensure that quality issues such as these are eliminated or kept to a minimum to maintain or increase the number of customers purchasing their product.

  9. Apollo experience report: Reliability and quality assurance

    NASA Technical Reports Server (NTRS)

    Sperber, K. P.

    1973-01-01

    The reliability of the Apollo spacecraft resulted from the application of proven reliability and quality techniques and from sound management, engineering, and manufacturing practices. Continual assessment of these techniques and practices was made during the program, and, when deficiencies were detected, adjustments were made and the deficiencies were effectively corrected. The most significant practices, deficiencies, adjustments, and experiences during the Apollo Program are described in this report. These experiences can be helpful in establishing an effective base on which to structure an efficient reliability and quality assurance effort for future space-flight programs.

  10. Software Quality Assurance: Early and Continuous Throughout the Lifecycle

    DTIC Science & Technology

    2009-04-23

    Assessment ( ISQA ) • Wrap-up • Glossary 2SSTC 2009 – SW Qual Assurance in Lifecycle (20-Apr-2009).ppt Perspectives Influence Software Quality Goals...yc e • Independent Software Quality Assessment ( ISQA ) • Wrap-up • Glossary 5SSTC 2009 – SW Qual Assurance in Lifecycle (20-Apr-2009).ppt Why Software... ISQA ) • Wrap-up • Glossary 7SSTC 2009 – SW Qual Assurance in Lifecycle (20-Apr-2009).ppt Software Quality Assurance Problem, Solution, Result Problem

  11. The role of the EPA radiation quality assurance program in the measurement quality assurance accreditation program for radioassay laboratories

    SciTech Connect

    Grady, T.M.

    1993-12-31

    As the nature and extent of radiological contamination becomes better documented and more public, radioanalytical laboratories are faced with a constantly expanding variety of new and difficult analytical requirements. Concurrent with those requirements is the responsibility to provide customers, regulatory officials, or the public with defensible data produced in an environment of verifiable, controlled quality. To meet that need, a quality assurance accreditation program for radioassay laboratories has been proposed by the American National Standards Institute (ANSI). The standard will provide the organizational framework and functional requirements needed to assure the quality of laboratory outputs. Under the proposed program, the U.S. Environmental Protection Agency`s (EPA`s) Laboratory Intercomparison Program plays a key role as a reference laboratory. The current and proposed roles of the EPA Intercomparison Program are discussed, as are the functional relationships between EPA, the accreditating organization, and the service and monitoring laboratories.

  12. 10 CFR 71.135 - Quality assurance records.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Assurance § 71.135 Quality assurance records. The licensee, certificate holder, and applicant for a CoC..., location, and assigned responsibility. The licensee, certificate holder, and applicant for a CoC shall... a CoC last engage in the activity for which the quality assurance program was developed. If...

  13. QUALITY SCIENCE AND QUALITY ASSURANCE: OBSERVATIONS OR AN ENVIRONMENTAL SCIENTIST

    EPA Science Inventory

    --

    ABSTRACT
    The purpose of this manuscript is to examine the relationship between quality science (QS) and quality assurance (QA). Many research scientists definitely want to do QS, but are afraid or do not want to do QA because they are intimidated by the QA proc...

  14. QUALITY SCIENCE AND QUALITY ASSURANCE: OBSERVATIONS OR AN ENVIRONMENTAL SCIENTIST

    EPA Science Inventory

    --

    ABSTRACT
    The purpose of this manuscript is to examine the relationship between quality science (QS) and quality assurance (QA). Many research scientists definitely want to do QS, but are afraid or do not want to do QA because they are intimidated by the QA proc...

  15. Online Course Quality Assurance: Development of a Quality Checklist

    ERIC Educational Resources Information Center

    McGahan, Steven J.; Jackson, Christina M.; Premer, Karen

    2015-01-01

    The University of Nebraska at Kearney's Online Course Checklist is the main instrument for assessing the quality of online courses at UNK. A number of issues were faced when developing and deploying this quality assurance checklist at a small four-year university. The process including development, implementation, and revision is discussed along…

  16. 48 CFR 846.408 - Single-agency assignments of Government contract quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... of Government contract quality assurance. 846.408 Section 846.408 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 846.408 Single-agency assignments of Government contract quality assurance....

  17. 48 CFR 46.408 - Single-agency assignments of Government contract quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... of Government contract quality assurance. 46.408 Section 46.408 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.408 Single-agency assignments of Government contract quality assurance. (a)...

  18. Quality Assurance in Higher Education: A Review of Literature

    ERIC Educational Resources Information Center

    Ryan, Tricia

    2015-01-01

    This paper examines the literature surrounding quality assurance in global higher education. It provides an overview of accreditation as a mechanism to ensure quality in higher education, examines models of QA, and explores the concept of quality (including definitions of quality and quality assurance). In addition, this paper provides a review of…

  19. 10 CFR 71.103 - Quality assurance organization.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... location or locations where activities are performed, the organizational structure for executing the... the organizational structure, the individual(s) assigned the responsibility for assuring effective... performing quality assurance functions must have sufficient authority and organizational freedom to—...

  20. 10 CFR 71.103 - Quality assurance organization.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... location or locations where activities are performed, the organizational structure for executing the... the organizational structure, the individual(s) assigned the responsibility for assuring effective... performing quality assurance functions must have sufficient authority and organizational freedom to—...

  1. Quality Assurance Guidance for the Collection of Meteorological Data Using Passive Radiometers

    EPA Science Inventory

    This document augments the February 2000 guidance entitled Meteorological Monitoring Guidance for Regulatory Modeling Applications and the March 2008 guidance entitled Quality Assurance Handbook for Air Pollution Measurement Systems Volume IV: Meteorological Measurements Version ...

  2. Quality Assurance Guidance for the Collection of Meteorological Data Using Passive Radiometers

    EPA Science Inventory

    This document augments the February 2000 guidance entitled Meteorological Monitoring Guidance for Regulatory Modeling Applications and the March 2008 guidance entitled Quality Assurance Handbook for Air Pollution Measurement Systems Volume IV: Meteorological Measurements Version ...

  3. Annual Quality Assurance Conference Presentations by Glynda Smith and Carrie Miller

    EPA Pesticide Factsheets

    25th Annual Quality Assurance Conference Presentation: Disinfectants/Disinfection Byproducts –Rules and Requirements and Presentation: Long Term 2 Enhanced Surface Water Treatment Rule (LT2) Cryptosporidium Monitoring

  4. [Quality assurance and quality management in intensive care].

    PubMed

    Notz, K; Dubb, R; Kaltwasser, A; Hermes, C; Pfeffer, S

    2015-11-01

    Treatment success in hospitals, particularly in intensive care units, is directly tied to quality of structure, process, and outcomes. Technological and medical advancements lead to ever more complex treatment situations with highly specialized tasks in intensive care nursing. Quality criteria that can be used to describe and correctly measure those highly complex multiprofessional situations have only been recently developed and put into practice.In this article, it will be shown how quality in multiprofessional teams can be definded and assessed in daily clinical practice. Core aspects are the choice of a nursing theory, quality assurance measures, and quality management. One possible option of quality assurance is the use of standard operating procedures (SOPs). Quality can ultimately only be achieved if professional groups think beyond their boundaries, minimize errors, and establish and live out instructions and SOPs.

  5. Quality assurance procedures for environmental control and monitoring in plant growth facilities. Report of the North Central Regional 101 Committee on Growth Chamber Use

    NASA Technical Reports Server (NTRS)

    Tibbitts, T. W. (Principal Investigator)

    1986-01-01

    This report includes procedures for ensuring the quality of the environment provided for plant growth in controlled environment facilities. Biologists and engineers may use these procedures for ensuring quality control during experiments or for ensuring quality control in the design of plant growth facilities. Environmental monitoring prior to and during experiments is included in these procedures. Specific recommendations cover control, acquisition, and calibration for sensor types for the separate parameters of radiation (light), temperature, humidity, carbon dioxide, and air movement.

  6. Quality assurance procedures for environmental control and monitoring in plant growth facilities. Report of the North Central Regional 101 Committee on Growth Chamber Use

    NASA Technical Reports Server (NTRS)

    Tibbitts, T. W. (Principal Investigator)

    1986-01-01

    This report includes procedures for ensuring the quality of the environment provided for plant growth in controlled environment facilities. Biologists and engineers may use these procedures for ensuring quality control during experiments or for ensuring quality control in the design of plant growth facilities. Environmental monitoring prior to and during experiments is included in these procedures. Specific recommendations cover control, acquisition, and calibration for sensor types for the separate parameters of radiation (light), temperature, humidity, carbon dioxide, and air movement.

  7. Spacelab Data Processing Facility (SLDPF) quality assurance expert systems development

    NASA Technical Reports Server (NTRS)

    Kelly, Angelita C.; Basile, Lisa; Ames, Troy; Watson, Janice; Dallam, William

    1987-01-01

    Spacelab Data Processing Facility (SLDPF) expert system prototypes have been developed to assist in the quality assurance of Spacelab and/or Attached Shuttle Payload (ASP) processed telemetry data. SLDPF functions include the capturing, quality monitoring, processing, accounting, and forwarding of mission data to various user facilities. Prototypes for the two SLDPF functional elements, the Spacelab Output Processing System and the Spacelab Input Processing Element, are described. The prototypes have produced beneficial results including an increase in analyst productivity, a decrease in the burden of tedious analyses, the consistent evaluation of data, and the providing of concise historical records.

  8. Spacelab Data Processing Facility (SLDPF) quality assurance expert systems development

    NASA Technical Reports Server (NTRS)

    Kelly, Angelita C.; Basile, Lisa; Ames, Troy; Watson, Janice; Dallam, William

    1987-01-01

    Spacelab Data Processing Facility (SLDPF) expert system prototypes were developed to assist in the quality assurance of Spacelab and/or Attached Shuttle Payload (ASP) processed telemetry data. The SLDPF functions include the capturing, quality monitoring, processing, accounting, and forwarding of mission data to various user facilities. Prototypes for the two SLDPF functional elements, the Spacelab Output Processing System and the Spacelab Input Processing Element, are described. The prototypes have produced beneficial results including an increase in analyst productivity, a decrease in the burden of tedious analyses, the consistent evaluation of data, and the providing of concise historical records.

  9. Spacelab Data Processing Facility (SLDPF) quality assurance expert systems development

    NASA Technical Reports Server (NTRS)

    Kelly, Angelita C.; Basile, Lisa; Ames, Troy; Watson, Janice; Dallam, William

    1987-01-01

    Spacelab Data Processing Facility (SLDPF) expert system prototypes have been developed to assist in the quality assurance of Spacelab and/or Attached Shuttle Payload (ASP) processed telemetry data. SLDPF functions include the capturing, quality monitoring, processing, accounting, and forwarding of mission data to various user facilities. Prototypes for the two SLDPF functional elements, the Spacelab Output Processing System and the Spacelab Input Processing Element, are described. The prototypes have produced beneficial results including an increase in analyst productivity, a decrease in the burden of tedious analyses, the consistent evaluation of data, and the providing of concise historical records.

  10. UMTRA technical assistance contractor quality assurance program plan

    SciTech Connect

    Not Available

    1994-10-01

    This Quality Assurance Program Plan (QAPP) provides the primary requirements for the integration of quality functions into all Technical Assistance Contractor (TAC) Project organization activities. The QAPP is the written directive authorized by the TAc Program Manager to accomplish this task and to implement procedures that provide the controls and sound management practices needed to ensure TAC contractual obligations are met. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization functions are executed in a manner that will protect public health and safety, promote the success of the Project, and meet or exceed contract requirements.

  11. Spinal cord testing: auditing for quality assurance.

    PubMed

    Marr, J A; Reid, B

    1991-04-01

    A quality assurance audit of spinal cord testing as documented by staff nurses was carried out. Twenty-five patient records were examined for accuracy of documented testing and compared to assessments performed by three investigators. A pilot study established interrater reliability of a tool that was designed especially for this study. Results indicated staff nurses failed to meet pre-established 100% standard in all categories of testing when compared with investigator's findings. Possible reasons for this disparity are discussed as well as indications for modifications in the spinal testing record, teaching program and preset standards.

  12. Practical aspects of internal quality assurance.

    PubMed

    Uldall, A

    1991-01-01

    The final analytical quality of a result is influenced by external and internal factors. The quality of external elements is influenced by the individual laboratory through its choice of method and supply; such elements are, e.g. reference materials, calibrators, control materials, reagents, reagent kits, instruments and disposables. The internal elements can be described through rules for good laboratory practice (GLP), and include all aspects of internal quality assurance. In this paper, GLP is used to describe the proper milieau in which the optimally selected method is working. The control system for acceptance or rejection of any particular batch of analysis, as well as the long-term control, are also described separately.

  13. The role of quality assurance in future midwifery practice.

    PubMed

    Dawson, J

    1993-08-01

    Recent recommendations have been made which would give midwives a more central role in maternity care and a greater degree of independence than they currently enjoy. This paper argues that midwives' current attitudes to quality assurance are incompatible with this enhanced role. Research conducted in three health districts is described, which explored the perceptions of nurses, midwives and managers towards quality assurance. The findings indicate that quality assurance (in whatever form that concept is operationalized) is a demonstration of accountability. For managers this accountability is primarily for the service as a whole, whilst nurses and midwives view their accountability as being owed to patients/clients. The main methodology which the study identified as being used for monitoring nursing care was the development and auditing of explicit standards. This approach has been actively promoted by the Royal College of Nursing, enabling nurses to regain control of the purely professional aspects of the nursing profession. Midwives in the study districts showed a marked reluctance to adopt such a strategy, taking the view that as independent practitioners consensus standards would be unacceptable. It is argued that this attitude is inconsistent with the basic principle that professionals are accountable for both demonstrating and developing the quality of professional practice. It is further suggested that midwives currently have an opportunity to regain professional control of midwifery practice, which will be lost unless they are prepared to take responsibility for evaluating the standards for which they are accountable.

  14. [Quality assurance and total quality management in residential home care].

    PubMed

    Nübling, R; Schrempp, C; Kress, G; Löschmann, C; Neubart, R; Kuhlmey, A

    2004-02-01

    Quality, quality assurance, and quality management have been important topics in residential care homes for several years. However, only as a result of reform processes in the German legislation (long-term care insurance, care quality assurance) is a systematic discussion taking place. Furthermore, initiatives and holistic model projects, which deal with the assessment and improvement of service quality, were developed in the field of care for the elderly. The present article gives a critical overview of essential developments. Different comprehensive approaches such as the implementation of quality management systems, nationwide expert-based initiatives, and developments towards professionalizing care are discussed. Empirically based approaches, especially those emphasizing the assessment of outcome quality, are focused on in this work. Overall, the authors conclude that in the past few years comprehensive efforts have been made to improve the quality of care. However, the current situation still requires much work to establish a nationwide launch and implementation of evidence-based quality assurance and quality management.

  15. KCBX Quality Assurance Project Plan - October 2014

    EPA Pesticide Factsheets

    This revised plan's standards for data quality, sampling and testing methods, and task management guide the implementation of Ambient Air Monitoring by URS Corporation at the KCBX Terminals Company North and South Terminals in Chicago, Ill.

  16. KCBX Quality Assurance Project Plan - February 2014

    EPA Pesticide Factsheets

    This plan's standards for data quality, sampling and testing methods, and task management guide the implementation of Ambient Air Monitoring, by URS Corporation, at the KCBX Terminals Company North and South Terminals in Chicago, IL.

  17. QUALITY ASSURANCE PERFORMANCE AUDIT REPORT FOR THE SECRETARIA DEL MEDIO AMBIENTE CIUDAD DE MEXICO, DF, MEXICO RED AUTOMATICA DE MONITOREO ATMOSFERICO (RAMA) AIR QUALITY MONITORING STATIONS

    EPA Science Inventory

    The United States Environmental Protection Agency (U.S. EPA) conducted this evaluation of the air monitoring network, known as RAM (Red Automatica de Monitoreo Atmosferico) at the request of the Mexico City Secretariat of the Environment on October 16-27, 2000. This evaluation...

  18. QUALITY ASSURANCE PERFORMANCE AUDIT REPORT FOR THE SECRETARIA DEL MEDIO AMBIENTE CIUDAD DE MEXICO, DF, MEXICO RED AUTOMATICA DE MONITOREO ATMOSFERICO (RAMA) AIR QUALITY MONITORING STATIONS

    EPA Science Inventory

    The United States Environmental Protection Agency (U.S. EPA) conducted this evaluation of the air monitoring network, known as RAM (Red Automatica de Monitoreo Atmosferico) at the request of the Mexico City Secretariat of the Environment on October 16-27, 2000. This evaluation...

  19. 23 CFR 637.207 - Quality assurance program.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... ensure that the design-builder is providing the quality of materials and construction required by the... CONSTRUCTION INSPECTION AND APPROVAL Quality Assurance Procedures for Construction § 637.207 Quality assurance...) Quality control sampling and testing results may be used as part of the acceptance decision provided...

  20. 23 CFR 637.207 - Quality assurance program.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... ensure that the design-builder is providing the quality of materials and construction required by the... CONSTRUCTION INSPECTION AND APPROVAL Quality Assurance Procedures for Construction § 637.207 Quality assurance...) Quality control sampling and testing results may be used as part of the acceptance decision provided...

  1. 48 CFR 2146.270 - FEGLI Program quality assurance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 2146.270 FEGLI Program quality assurance requirements. (a) The... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true FEGLI Program quality...

  2. 48 CFR 2146.270 - FEGLI Program quality assurance requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 2146.270 FEGLI Program quality assurance requirements. (a) The... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false FEGLI Program quality...

  3. 48 CFR 2146.270 - FEGLI Program quality assurance requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 2146.270 FEGLI Program quality assurance requirements. (a) The... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false FEGLI Program quality...

  4. 49 CFR 179.7 - Quality assurance program.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Quality assurance program. 179.7 Section 179.7... Reports § 179.7 Quality assurance program. (a) At a minimum, each tank car facility shall have a quality... tank car; and (3) Prevents non-conformities from recurring. (b) At a minimum, the quality...

  5. Flight Dynamics Mission Support and Quality Assurance Process

    NASA Technical Reports Server (NTRS)

    Oh, InHwan

    1996-01-01

    This paper summarizes the method of the Computer Sciences Corporation Flight Dynamics Operation (FDO) quality assurance approach to support the National Aeronautics and Space Administration Goddard Space Flight Center Flight Dynamics Support Branch. Historically, a strong need has existed for developing systematic quality assurance using methods that account for the unique nature and environment of satellite Flight Dynamics mission support. Over the past few years FDO has developed and implemented proactive quality assurance processes applied to each of the six phases of the Flight Dynamics mission support life cycle: systems and operations concept, system requirements and specifications, software development support, operations planing and training, launch support, and on-orbit mission operations. Rather than performing quality assurance as a final step after work is completed, quality assurance has been built in as work progresses in the form of process assurance. Process assurance activities occur throughout the Flight Dynamics mission support life cycle. The FDO Product Assurance Office developed process checklists for prephase process reviews, mission team orientations, in-progress reviews, and end-of-phase audits. This paper will outline the evolving history of FDO quality assurance approaches, discuss the tailoring of Computer Science Corporations's process assurance cycle procedures, describe some of the quality assurance approaches that have been or are being developed, and present some of the successful results.

  6. Quality assurance in mammography: artifact analysis.

    PubMed

    Hogge, J P; Palmer, C H; Muller, C C; Little, S T; Smith, D C; Fatouros, P P; de Paredes, E S

    1999-01-01

    Evaluation of mammograms for artifacts is essential for mammographic quality assurance. A variety of mammographic artifacts (i.e., variations in mammographic density not caused by true attenuation differences) can occur and can create pseudolesions or mask true abnormalities. Many artifacts are readily identified, whereas others present a true diagnostic challenge. Factors that create artifacts may be related to the processor (eg, static, dirt or excessive developer buildup on the rollers, excessive roller pressure, damp film, scrapes and scratches, incomplete fixing, power failure, contaminated developer), the technologist (eg, improper film handling and loading, improper use of the mammography unit and related equipment, positioning and darkroom errors), the mammography unit (eg, failure of the collimation mirror to rotate, grid inhomogeneity, failure of the reciprocating grid to move, material in the tube housing, compression failure, improper alignment of the compression paddle with the Bucky tray, defective compression paddle), or the patient (e.g., motion, superimposed objects or substances [jewelry, body parts, clothing, hair, implanted medical devices, foreign bodies, substances on the skin]). Familiarity with the broad range of artifacts and the measures required to eliminate them is vital. Careful attention to darkroom cleanliness, care in film handling, regularly scheduled processor maintenance and chemical replenishment, daily quality assurance activities, and careful attention to detail during patient positioning and mammography can reduce or eliminate most mammographic artifacts.

  7. Radiographic Film Processing Quality Assurance: A Self-Teaching Workbook. Quality Assurance Series.

    ERIC Educational Resources Information Center

    Goldman, Lee W.

    This workbook has been designed for use in conjunction with the manual, "Photographic Quality Assurance in Diagnostic Radiology, Nuclear Medicine and Radiation Therapy." Presented are several typical problems arising from the existence of variability and fluctuations in the automatic processing of radiographs, which unless corrected, can…

  8. Nuclear Technology. Course 31: Quality Assurance Practices. Module 31-7, Auditing for Quality Assurance.

    ERIC Educational Resources Information Center

    Pritchard, Jim; Espy, John

    This seventh in a series of eight modules for a course titled Quality Assurance Practices describes the key features of an audit system and offers practice in carrying out tasks of the technicians. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3) objectives, (4) notes to…

  9. Radiographic Film Processing Quality Assurance: A Self-Teaching Workbook. Quality Assurance Series.

    ERIC Educational Resources Information Center

    Goldman, Lee W.

    This workbook has been designed for use in conjunction with the manual, "Photographic Quality Assurance in Diagnostic Radiology, Nuclear Medicine and Radiation Therapy." Presented are several typical problems arising from the existence of variability and fluctuations in the automatic processing of radiographs, which unless corrected, can…

  10. Data-collection methods, quality-assurance data, and site considerations for total dissolved gas monitoring, lower Columbia River, Oregon and Washington, 2000

    USGS Publications Warehouse

    Tanner, Dwight Q.; Johnston, Matthew W.

    2001-01-01

    Excessive total dissolved gas pressure can cause gas-bubble trauma in fish downstream from dams on the Columbia River. In cooperation with the U.S. Army Corps of Engineers, the U.S. Geological Survey collected data on total dissolved gas pressure, barometric pressure, water temperature, and probe depth at eight stations on the lower Columbia River from the John Day forebay (river mile 215.6) to Camas (river mile 121.7) in water year 2000 (October 1, 1999, to September 30, 2000). These data are in the databases of the U.S. Geological Survey and the U.S. Army Corps of Engineers. Methods of data collection, review, and processing, and quality-assurance data are presented in this report.

  11. 48 CFR 246.408 - Single-agency assignments of Government contract quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... of Government contract quality assurance. 246.408 Section 246.408 Federal Acquisition Regulations... ASSURANCE Government Contract Quality Assurance 246.408 Single-agency assignments of Government contract quality assurance....

  12. Dental technicians: regulation and quality assurance.

    PubMed

    Newsome, P R H

    2011-01-08

    For many years, dental technicians were largely self-regulated and left to work without any undue interference from, or legislation by, outside authorities. This situation has changed somewhat dramatically in recent years, primarily as a result of a) mandatory General Dental Council (GDC) registration of UK-based dental technicians and b) the requirement to comply with certain EC directives governing the provision of dental appliances. There seems to be some confusion, however, about these various changes and the ensuing ramifications for dental practitioners. The purpose of this paper is firstly to clarify the various regulatory issues currently surrounding technician registration and the provision of laboratory work ('Made in Britain' or otherwise) and secondly to explore the various internationally-recognised quality assurance standards that can be applied to the production of such work in order to assist dentists in gauging quality-related claims made by dental laboratories, both in the UK and overseas.

  13. Project officer's perspective: quality assurance as a management tool.

    PubMed

    Heiby, J

    1993-06-01

    Advances in the management of health programs in less developed countries (LDC) have not kept pace with the progress of the technology used. The US Agency for International Development mandated the Quality Assurance Project (QAP) to provide quality improvement technical assistance to primary health care systems in LDCs while developing appropriate quality assurance (QA) strategies. The quality of health care in recent years in the US and Europe focused on the introduction of management techniques developed for industry into health systems. The experience of the QAP and its predecessor, the PRICOR Project, shows that quality improvement techniques facilitate measurement of quality of care. A recently developed WHO model for the management of the sick child provides scientifically based standards for actual care. Since 1988, outside investigators measuring how LDC clinicians perform have revealed serious deficiencies in quality compared with the program's own standards. This prompted developed of new QA management initiatives: 1) communicating standards clearly to the program staff; 2) actively monitoring actual performance corresponds to these standards; and 3) taking action to improve performance. QA means that managers are expected to monitor service delivery, undertake problem solving, and set specific targets for quality improvement. Quality improvement methods strengthen supervision as supervisors can objectively assess health worker performance. QA strengthens the management functions that support service delivery, e.g., training, records management, finance, logistics, and supervision. Attention to quality can contribute to improved health worker motivation and effective incentive programs by recognition for a job well done and opportunities for learning new skills. These standards can also address patient satisfaction. QA challenges managers to aim for the optimal level of care attainable.

  14. 21 CFR 1000.55 - Recommendation for quality assurance programs in diagnostic radiology facilities.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... producing the images. Quality assurance actions include both “quality control” techniques and “quality... control techniques are those techniques used in the monitoring (or testing) and maintenance of the components of an x-ray system. The quality control techniques thus are concerned directly with the equipment...

  15. 222-S Laboratory Quality Assurance Plan. Revision 1

    SciTech Connect

    Meznarich, H.K.

    1995-07-31

    This Quality Assurance Plan provides,quality assurance (QA) guidance, regulatory QA requirements (e.g., 10 CFR 830.120), and quality control (QC) specifications for analytical service. This document follows the U.S Department of Energy (DOE) issued Hanford Analytical Services Quality Assurance Plan (HASQAP). In addition, this document meets the objectives of the Quality Assurance Program provided in the WHC-CM-4-2, Section 2.1. Quality assurance elements required in the Guidelines and Specifications for Preparing Quality Assurance Program Plans (QAMS-004) and Interim Guidelines and Specifications for Preparing Quality Assurance Project Plans (QAMS-005) from the US Environmental Protection Agency (EPA) are covered throughout this document. A quality assurance index is provided in the Appendix A. This document also provides and/or identifies the procedural information that governs laboratory operations. The personnel of the 222-S Laboratory and the Standards Laboratory including managers, analysts, QA/QC staff, auditors, and support staff shall use this document as guidance and instructions for their operational and quality assurance activities. Other organizations that conduct activities described in this document for the 222-S Laboratory shall follow this QA/QC document.

  16. Quality Assurance for Essential Climate Variables

    NASA Astrophysics Data System (ADS)

    Folkert Boersma, K.; Muller, Jan-Peter

    2015-04-01

    Satellite data are of central interest to the QA4ECV project. Satellites have revolutionized the Earth's observation system of climate change and air quality over the past three decades, providing continuous data for the entire Earth. However, many users of these data are lost in the fog as to the quality of these satellite data. Because of this, the European Union expressed in its 2013 FP7 Space Research Call a need for reliable, traceable, and understandable quality information on satellite data records that could serve as a blueprint contribution to a future Copernicus Climate Change Service. The potential of satellite data to benefit climate change and air quality services is too great to be ignored. QA4ECV therefore bridges the gap between end-users of satellite data and the satellite data products. We are developing an internationally acceptable Quality Assurance (QA) framework that provides understandable and traceable quality information for satellite data used in climate and air quality services. Such a framework should deliver the historically linked long-term data sets that users need, in a format that they can readily use. QA4ECV has approached more than 150 users and suppliers of satellite data to collect their needs and expectations. The project will use their response as a guideline for developing user-friendly tools to obtain information on the completeness, accuracy, and fitness-for-purpose of the satellite datasets. QA4ECV collaborates with 4 joint FP7 Space projects in reaching out to scientists, policy makers, and other end-users of satellite data to improve understanding of the special challenges -and also opportunities- of working with satellite data for climate and air quality purposes. As a demonstration of its capacity, QA4ECV will generate multi-decadal climate data records for 3 atmospheric ECV precursors (nitrogen dioxide, formaldehyde, and carbon monoxide) and 3 land ECVs (albedo, leaf area index and absorbed photosynthetically active

  17. QAP co-sponsors global meeting on quality assurance in developing countries.

    PubMed

    1994-01-01

    A consultative meeting on quality health care in developing countries was held in the Netherlands immediately before the 1993 conference of the International Society of Quality Assurance in Health Care. Sponsored by the USAID-funded Quality Assurance Project in collaboration with the World Health Organization and the Danish foreign aid agency, DANIDA, the meeting brought together representatives from 17 developing countries. Participants enthusiastically exchanged experiences in adapting and applying quality assurance methods to resource-strained health care systems and valued the recommendations they received. Technical discussions focused on strategic planning, standard setting and monitoring, problem solving, and quality assurance capacity building. The meeting included background papers on each theme, synopses of the work of representatives of selected countries, and small group sessions. The participants recognized that certain structures, such as a data and health information monitoring system, must be in place to sustain a quality assurance program. There are also key environmental factors, including a commitment in the form of resource allocation from top leadership. The highlights of the meeting were presented at the general conference to great acclaim. Participants in the meeting benefitted from the information generated by the exchange of ideas and became unified in their understanding that quality assurance is a viable and necessary component of health care management. The success of the meeting led to the proposal which is under consideration that a permanent committee be established to ensure the participation of representatives of developing countries in international quality assurance activities.

  18. The Quality Assurance Manual and EPA`s acid rain data quality

    SciTech Connect

    Bloomer, B.J.; Winkler, J.P.

    1995-12-31

    November 15, 1990 saw the passage of the Clean Air Act Amendments of 1990. Within this law was the requirements for all electric utility units greater than 25 megawatts of generated electrical capacity to monitor SO{sub 2}, NO{sub x}, CO{sub 2}, opacity, and volumetric flow of the stack gases. This paper summarizes the Acid Rain Program`s approach to Continuous Emissions Monitoring Systems (CEMS) Quality Control and Quality Assurance requirements and their use in the market based pollution control program of Title IV of the Clean Air Act Amendments of 1990. This paper attempts to present the perspective of the authors as to what is important for excellent monitoring system availability and ensuring accurate data acquisition. Emphasis is placed upon the Quality Assurance Manual required by the Acid Rain Regulations for affected unit`s to maintain and follow.

  19. 10 CFR 72.140 - Quality assurance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... component will perform satisfactorily in service. Quality assurance includes quality control, which... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance requirements. 72.140 Section 72.140... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE...

  20. Institutional Response to the Swedish Model of Quality Assurance.

    ERIC Educational Resources Information Center

    Nilsson, Karl-Axel; Wahlen, Staffan

    2000-01-01

    Evaluates the Swedish model of quality assurance of higher education by examining the response of institutions to 27 quality audits and 19 follow-up interviews. Discusses the relationship between top-down and bottom-up approaches to internal quality assurance and suggests that, with growing professionalization, more limited result-oriented audits…

  1. 10 CFR 830.121 - Quality Assurance Program (QAP).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality... affect, or may affect, the nuclear safety of DOE nuclear facilities must conduct work in accordance with...

  2. 10 CFR 830.121 - Quality Assurance Program (QAP).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality... affect, or may affect, the nuclear safety of DOE nuclear facilities must conduct work in accordance with...

  3. 10 CFR 830.121 - Quality Assurance Program (QAP).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality... affect, or may affect, the nuclear safety of DOE nuclear facilities must conduct work in accordance with...

  4. Institutional Response to the Swedish Model of Quality Assurance.

    ERIC Educational Resources Information Center

    Nilsson, Karl-Axel; Wahlen, Staffan

    2000-01-01

    Evaluates the Swedish model of quality assurance of higher education by examining the response of institutions to 27 quality audits and 19 follow-up interviews. Discusses the relationship between top-down and bottom-up approaches to internal quality assurance and suggests that, with growing professionalization, more limited result-oriented audits…

  5. The Value of Student Engagement for Higher Education Quality Assurance

    ERIC Educational Resources Information Center

    Coates, Hamish

    2005-01-01

    As the principles and practices of quality assurance are further implanted in higher education, methodological questions about how to understand and manage quality become increasingly important. This paper argues that quality assurance determinations need to take account of how and to what extent students engage with activities that are likely to…

  6. Educational Quality Assurance in Universities: An Enhanced Model.

    ERIC Educational Resources Information Center

    Boyle, Patrick; Bowden, John A.

    1997-01-01

    Presents a model of quality assurance for colleges and universities, distilled from key concepts in the literature about quality assurance and higher education culture and practice. The model has continuous quality improvement in student learning at its center, and includes elements of institutional values, faculty evaluation and development,…

  7. Quality Assurance in Higher Education as a Political Process

    ERIC Educational Resources Information Center

    Skolnik, Michael L.

    2010-01-01

    The procedures commonly employed for quality assurance in higher education are designed as if the endeavour were a technical process, whereas it may be more useful to view it as a political process. For example, quality assurance requires making choices among competing conceptions of quality, and in so doing privileges some interests over others.…

  8. Quality Assurance in an Era of Consumer Empowerment and Choice.

    ERIC Educational Resources Information Center

    Sundram, Clarence J.

    1994-01-01

    Seven challenges in quality assurance for services for people with mental retardation include defining quality, identifying the customer, making choices real, realizing that good intentions are not enough, not applying innovations too hastily or on too large a scale, assuring quality of leadership and staff, and rediscovering common sense. (DB)

  9. Quality Assurance and e-Learning: Blue Skies and Pragmatism

    ERIC Educational Resources Information Center

    Oliver, Ron

    2005-01-01

    This paper considers the role of quality assurance in e-learning; reflecting on the conditions necessary for successful e-learning. It reviews some of the current international work on quality assurance in this area and goes on to consider the ways in which the quality of a process or activity can be assessed--focusing on the use of benchmarking…

  10. Up-Stream Dissolved Oxygen TMDL Project Quality Assurance ProjectPlan

    SciTech Connect

    Stringfellow, William T.

    2005-05-13

    A quality assurance project plan (QAPP) for the execution of an ecosystem level monitoring and research program examining algal ecology in highly impaired rivers. Procedures for executing both field and laboratory surface water quality and flow analysis are described. The procedures described here are compatible with the California Surface Water Ambient Monitoring program (SWAMP).

  11. Data Validation & Laboratory Quality Assurance for Region 9

    EPA Pesticide Factsheets

    In all hazardous site investigations, it is essential to know the quality of the data used for decision-making purposes. Validation of data requires that appropriate quality assurance and quality control (QA/QC) procedures be followed.

  12. Compliance with Aerospace Quality Assurance Standard AS9100

    NASA Technical Reports Server (NTRS)

    Hughitt, Brian

    2009-01-01

    The contents include: 1) United States Federal Acquisition Regulations (FAR) Part 46, Quality Assurance; 2) NASA Quality Roadmap; 3) AS9003 Inspection and Test Quality Management System; 4) Government Oversight Responsibilities; and 5) Third Party vs Second Party Oversight.

  13. Standard procedures and quality-control practices for the U.S. Geological Survey National Field Quality Assurance Program from 1982 through 1993

    USGS Publications Warehouse

    Stanley, D.L.

    1995-01-01

    The U.S. Geological Survey operates the National Field Quality Assurance Program to provide quality- assurance reference samples to field personnel who make water-quality field measurements. The program monitors the accuracy and precision of pH, specific conductance, and alkalinity field measurements. This report documents the operational procedures and quality-control techniques used in operating the quality-assurance program.

  14. Quality assurance practices for the chemical and biological analyses of water and fluvial sediments

    USGS Publications Warehouse

    Friedman, Linda C.; Erdmann, David E.

    1982-01-01

    This chapter contains practices used by the U.S. Geological Survey to assure the quality of analytical data for water, fluvial sediment, and aquatic organisms. These practices are directed primarily toward personnel making water quality measurements. Some detail specific quality control techniques, others document quality assurance procedures being used by the Central Laboratories System of the U.S. Geological Survey, and still others describe various statistical techniques and give examples of their use in evaluating and assuring the quality of analytical data. The practices are arranged into eight sections: Analytical Methods Development Procedures, Standard Quantitative Analysis Techniques, Instrumental Techniques, Reference Material, Laboratory Quality Control; Quality Assurance Monitoring; Documentation, Summary, and Evaluation of Data, Materials Evaluation. Each section is preceded by a brief description of the material covered. Similarly within each section, each practice is preceded by a description of its application or scope.

  15. Quality assurance in radiation therapy: physical aspects

    SciTech Connect

    Svensson, H.

    1984-06-01

    The present status of the quality assurance work regarding the physical aspects in radiation treatment is discussed. In particular, the situation in Europe is surveyed. An analysis of the errors in the delivered absorbed dose to a specified point in the irradiated patient shows that the uncertainty, to approximately the same degree, depends on the dose distribution determination, the dose planning and the patient irradiation. Following the procedure generally in use, the overall uncertainty will be about 8%. The random uncertainties are estimated as one standard deviation and non-random uncertainties to corresponding degree of uncertainty. It is argued that this level must be improved. Furthermore, dose intercomparisons show that in reality much larger errors occur in clinical practice. Different means to improve the situation are discussed.

  16. SAPHIRE 8 Volume 6 - Quality Assurance

    SciTech Connect

    C. L. Smith; R. Nims; K. J. Kvarfordt

    2011-03-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Version 8 is a software application developed for performing a complete probabilistic risk assessment using a personal computer running the Microsoft Windows™ operating system. SAPHIRE 8 is funded by the U.S. Nuclear Regulatory Commission (NRC). The role of the INL in this project is that of software developer and tester. This development takes place using formal software development procedures and is subject to quality assurance (QA) processes. The purpose of this document is to describe how the SAPHIRE software QA is performed for Version 8, what constitutes its parts, and limitations of those processes. In addition, this document describes the Independent Verification and Validation that was conducted for Version 8 as part of an overall QA process.

  17. Automating quality assurance for digital radiography.

    PubMed

    Reiner, Bruce I

    2009-07-01

    The existing practice of quality assurance (QA) in medical imaging is problematic because of the subjective manner in which it is performed, the lack of community and industry-wide QA standards, a paucity of supporting technology, and an overall lack of accountability. The solution for optimizing QA lies in the creation of objective and reproducible QA metrics, whose analysis can be automated through the creation of computerized QA software algorithms. The QA data derived from these computerized programs would in turn create the infrastructure for a comprehensive QA database, which can serve as a valuable resource for QA education and training, research, decision support, and technology innovation. The ability to objectively track and analyze QA practice across the wide spectrum of imaging providers creates a mechanism for the creation and refinement of objective QA standards and "best practice" guidelines.

  18. SAPHIRE 8 Software Quality Assurance Plan

    SciTech Connect

    Curtis Smith

    2010-02-01

    This Quality Assurance (QA) Plan documents the QA activities that will be managed by the INL related to JCN N6423. The NRC developed the SAPHIRE computer code for performing probabilistic risk assessments (PRAs) using a personal computer (PC) at the Idaho National Laboratory (INL) under Job Code Number (JCN) L1429. SAPHIRE started out as a feasibility study for a PRA code to be run on a desktop personal PC and evolved through several phases into a state-of-the-art PRA code. The developmental activity of SAPHIRE was the result of two concurrent important events: The tremendous expansion of PC software and hardware capability of the 90s and the onset of a risk-informed regulation era.

  19. Hanford analytical services quality assurance requirements documents

    SciTech Connect

    Hyatt, J.E.

    1997-09-25

    Hanford Analytical Services Quality Assurance Requirements Document (HASQARD) is issued by the Analytical Services, Program of the Waste Management Division, US Department of Energy (US DOE), Richland Operations Office (DOE-RL). The HASQARD establishes quality requirements in response to DOE Order 5700.6C (DOE 1991b). The HASQARD is designed to meet the needs of DOE-RL for maintaining a consistent level of quality for sampling and field and laboratory analytical services provided by contractor and commercial field and laboratory analytical operations. The HASQARD serves as the quality basis for all sampling and field/laboratory analytical services provided to DOE-RL through the Analytical Services Program of the Waste Management Division in support of Hanford Site environmental cleanup efforts. This includes work performed by contractor and commercial laboratories and covers radiological and nonradiological analyses. The HASQARD applies to field sampling, field analysis, and research and development activities that support work conducted under the Hanford Federal Facility Agreement and Consent Order Tri-Party Agreement and regulatory permit applications and applicable permit requirements described in subsections of this volume. The HASQARD applies to work done to support process chemistry analysis (e.g., ongoing site waste treatment and characterization operations) and research and development projects related to Hanford Site environmental cleanup activities. This ensures a uniform quality umbrella to analytical site activities predicated on the concepts contained in the HASQARD. Using HASQARD will ensure data of known quality and technical defensibility of the methods used to obtain that data. The HASQARD is made up of four volumes: Volume 1, Administrative Requirements; Volume 2, Sampling Technical Requirements; Volume 3, Field Analytical Technical Requirements; and Volume 4, Laboratory Technical Requirements. Volume 1 describes the administrative requirements

  20. Quality Assurance Project Plan: Connecticut wetlands study

    SciTech Connect

    Sherman, A.; Gwin, S.

    1991-04-01

    EPA's Wetland Research Program has supported a major effort to study wetlands mitigation projects in the field. The field studies were designed to: (1) evaluate the project plans; (2) compare the projects with natural wetlands in the same land use setting; and (3) describe the development of the projects over time. The information from the studies will be used as technical guidance for setting performance criteria and developing design guidelines for mitigation projects. Pilot studies have been conducted in Oregon, Washington, Florida, and Connecticut. The report presents the methods and associated quality assurance procedures used during the Connecticut study. A major objective of the pilot study was to evaluate the field procedures and the data quality assessment protocols used. The authors are in the process of performing that evaluation. They anticipate that in some cases they will adopt the procedure, while others will be refined or discarded. Therefore, the authors caution the user of the document that, at this point, the EPA makes no claims or endorsement of the use of the field, laboratory, or data quality assessment procedures associated with the study.

  1. Software Quality Assurance for Nuclear Safety Systems

    SciTech Connect

    Sparkman, D R; Lagdon, R

    2004-05-16

    The US Department of Energy has undertaken an initiative to improve the quality of software used to design and operate their nuclear facilities across the United States. One aspect of this initiative is to revise or create new directives and guides associated with quality practices for the safety software in its nuclear facilities. Safety software includes the safety structures, systems, and components software and firmware, support software and design and analysis software used to ensure the safety of the facility. DOE nuclear facilities are unique when compared to commercial nuclear or other industrial activities in terms of the types and quantities of hazards that must be controlled to protect workers, public and the environment. Because of these differences, DOE must develop an approach to software quality assurance that ensures appropriate risk mitigation by developing a framework of requirements that accomplishes the following goals: {sm_bullet} Ensures the software processes developed to address nuclear safety in design, operation, construction and maintenance of its facilities are safe {sm_bullet} Considers the larger system that uses the software and its impacts {sm_bullet} Ensures that the software failures do not create unsafe conditions Software designers for nuclear systems and processes must reduce risks in software applications by incorporating processes that recognize, detect, and mitigate software failure in safety related systems. It must also ensure that fail safe modes and component testing are incorporated into software design. For nuclear facilities, the consideration of risk is not necessarily sufficient to ensure safety. Systematic evaluation, independent verification and system safety analysis must be considered for software design, implementation, and operation. The software industry primarily uses risk analysis to determine the appropriate level of rigor applied to software practices. This risk-based approach distinguishes safety

  2. The Soils and Groundwater – EM-20 S&T Roadmap Quality Assurance Project Plan

    SciTech Connect

    Fix, N. J.

    2008-02-11

    The Soils and Groundwater – EM-20 Science and Technology Roadmap Project is a U.S. Department of Energy, Office of Environmental Management-funded initiative designed to develop new methods, strategies and technology for characterizing, modeling, remediating, and monitoring soils and groundwater contaminated with metals, radionuclides, and chlorinated organics. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by EM-20 Roadmap Project staff.

  3. Technical aspects of the Naval Dosimetry Center quality assurance programme.

    PubMed

    St John, T J; Cassata, J R; Blake, P K; Wallace, W H; Minniti, R

    2006-01-01

    The purpose of this paper is to describe the technical aspects of the Naval Dosimetry Center (NDC) quality programme. The Navy has been formally monitoring personnel for occupational exposure to ionising radiation since at least 1946. The current system, the DT-702/PD, is the Harshaw 8840 holder and 8841 card. New card and holder checks are performed to verify that the correct LiF elements and holder filters are in the correct location and are of the correct composition. Element correction coefficient (ECC) magnitude and repeatability are also verified. Several quality assurance parameters are checked by a specially designed shipping machine. Calibration cards are used to calibrate each reader and quality control cards are inserted throughout a group of field cards to verify reader operation during the read process. The success of the programme is measured by annual proficiency tests administered by the National Voluntary Laboratory Accreditation Programme and Pacific Northwest National Laboratories.

  4. Building High-Performing and Improving Education Systems: Quality Assurance and Accountability. Review

    ERIC Educational Resources Information Center

    Slater, Liz

    2013-01-01

    Monitoring, evaluation, and quality assurance in their various forms are seen as being one of the foundation stones of high-quality education systems. De Grauwe, writing about "school supervision" in four African countries in 2001, linked the decline in the quality of basic education to the cut in resources for supervision and support.…

  5. Developing a quality assurance program for online services.

    PubMed Central

    Humphries, A W; Naisawald, G V

    1991-01-01

    A quality assurance (QA) program provides not only a mechanism for establishing training and competency standards, but also a method for continuously monitoring current service practices to correct shortcomings. The typical QA cycle includes these basic steps: select subject for review, establish measurable standards, evaluate existing services using the standards, identify problems, implement solutions, and reevaluate services. The Claude Moore Health Sciences Library (CMHSL) developed a quality assurance program for online services designed to evaluate services against specific criteria identified by research studies as being important to customer satisfaction. These criteria include reliability, responsiveness, approachability, communication, and physical factors. The application of these criteria to the library's existing online services in the quality review process is discussed with specific examples of the problems identified in each service area, as well as the solutions implemented to correct deficiencies. The application of the QA cycle to an online services program serves as a model of possible interventions. The use of QA principles to enhance online service quality can be extended to other library service areas. PMID:1909197

  6. Developing a quality assurance program for online services.

    PubMed

    Humphries, A W; Naisawald, G V

    1991-07-01

    A quality assurance (QA) program provides not only a mechanism for establishing training and competency standards, but also a method for continuously monitoring current service practices to correct shortcomings. The typical QA cycle includes these basic steps: select subject for review, establish measurable standards, evaluate existing services using the standards, identify problems, implement solutions, and reevaluate services. The Claude Moore Health Sciences Library (CMHSL) developed a quality assurance program for online services designed to evaluate services against specific criteria identified by research studies as being important to customer satisfaction. These criteria include reliability, responsiveness, approachability, communication, and physical factors. The application of these criteria to the library's existing online services in the quality review process is discussed with specific examples of the problems identified in each service area, as well as the solutions implemented to correct deficiencies. The application of the QA cycle to an online services program serves as a model of possible interventions. The use of QA principles to enhance online service quality can be extended to other library service areas.

  7. Quality Assurance of E-learning. ENQA Workshop Report 14

    ERIC Educational Resources Information Center

    Grifoll, Josep; Huertas, Esther; Prades, Anna; Rodriguez, Sebastian; Rubin, Yuri; Mulder, Fred; Ossiannilsson, Ebba

    2010-01-01

    E-learning in the European Higher Education Area has stampeded its way to the foreground of the Quality Assurance (QA) forum, and has become a key issue among quality assurance agencies and institutions in the European Higher Education Area (EHEA). Because internet-based learning is currently such a relevant topic, there is a dire need for the…

  8. 45 CFR 800.402 - Contract quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 3 2013-10-01 2013-10-01 false Contract quality assurance. 800.402 Section 800.402 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF PERSONNEL MANAGEMENT MULTI-STATE PLAN PROGRAM Compliance § 800.402 Contract quality assurance. (a) General. This...

  9. 45 CFR 800.402 - Contract quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 3 2014-10-01 2014-10-01 false Contract quality assurance. 800.402 Section 800.402 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF PERSONNEL MANAGEMENT MULTI-STATE PLAN PROGRAM Compliance § 800.402 Contract quality assurance. (a) General. This...

  10. Policy of Quality Assurance in Hong Kong Preschools

    ERIC Educational Resources Information Center

    Dora, Ho Choi-wa

    2007-01-01

    This article discusses the sources, processes and impact of the quality assurance policy implemented in Hong Kong preschools. Regarded as a sort of policy alignment between the subsystems of pre-primary, primary and secondary education, the introduction of a quality assurance policy has been directly and indirectly transforming the settlements in…

  11. The Landscape of Quality Assurance in Distance Education

    ERIC Educational Resources Information Center

    Scull, W. Reed; Kendrick, David; Shearer, Rick; Offerman, Dana

    2011-01-01

    Distance education permeates the field of professional and continuing education to such an extent that quality assurance (QA) is a topic no distance educator or administrator should avoid. Quality assurance is an issue not just for continuing education but also for higher education generally. Given the disruptive impact of distance education and…

  12. Understanding Quality Assurance: A Cross Country Case Study

    ERIC Educational Resources Information Center

    Choon Boey Lim, Fion

    2008-01-01

    Purpose: The purpose of this paper is to examine the level of understanding between an Australian university and its offshore partner institution, on quality assurance. It attempts to highlight the dynamics of quality assurance policy implementation within and across institutions for an offshore degree. Design/methodology/approach: The study used…

  13. Quality assurance of absorbed energy in Charpy impact test

    NASA Astrophysics Data System (ADS)

    Rocha, C. L. F.; Fabricio, D. A. K.; Costa, V. M.; Reguly, A.

    2016-07-01

    In order to ensure the quality assurance and comply with standard requirements, an intralaboratory study has been performed for impact Charpy tests, involving two operators. The results based on ANOVA (Analysis of Variance) and Normalized Error statistical techniques pointed out that the execution of the tests is appropriate, because the implementation of quality assurance methods showed acceptable results.

  14. Quality Assurance Toolkit for Distance Higher Education Institutions and Programmes

    ERIC Educational Resources Information Center

    Rama, Kondapalli, Ed.; Hope, Andrea, Ed.

    2009-01-01

    The Commonwealth of Learning is proud to partner with the Sri Lankan Ministry of Higher Education and UNESCO to produce this "Quality Assurance Toolkit for Distance Higher Education Institutions and Programmes". The Toolkit has been prepared with three features. First, it is a generic document on quality assurance, complete with a…

  15. 40 CFR Appendix C to Part 61 - Quality Assurance Procedures

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Quality Assurance Procedures C Appendix...—Quality Assurance Procedures Procedure 1—Determination of Adequate Chromatographic Peak Resolution In this....” Procedure 2—Procedure for Field Auditing GC Analysis Responsibilities of audit supervisor and analyst at...

  16. 48 CFR 2152.246-70 - Quality assurance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Quality assurance... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CLAUSES AND FORMS PRECONTRACT PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 2152.246-70 Quality assurance...

  17. A Rotational Blended Learning Model: Enhancement and Quality Assurance

    ERIC Educational Resources Information Center

    Ghoul, Said

    2013-01-01

    Research on blended learning theory and practice is growing nowadays with a focus on the development, evaluation, and quality assurance of case studies. However, the enhancement of blended learning existing models, the specification of their online parts, and the quality assurance related specifically to them have not received enough attention.…

  18. 40 CFR Appendix C to Part 61 - Quality Assurance Procedures

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Quality Assurance Procedures C Appendix C to Part 61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...—Quality Assurance Procedures Procedure 1—Determination of Adequate Chromatographic Peak Resolution In...

  19. Quality Assurance in South Africa: A Reply to John Mammen

    ERIC Educational Resources Information Center

    le Grange, L.

    2006-01-01

    In this article I point out that prominence given to higher education quality assurance by contemporary states might be viewed in the context of the ascendance of neoliberalism over the past few decades and a concomitant culture of performativity. However, I argue for a shift in the angle of vision on performativity and quality assurance through a…

  20. QUALITY ASSURANCE IN RESEARCH LABORATORIES: RULES AND REASON

    EPA Science Inventory

    Quality Assurance in Research Laboratories: Rules and Reason

    Ron Rogers, Quality Assurance and Records Manager, Environmental Carcinogenesis Division, NHEERL/ORD/US EPA, Research Triangle Park, NC, 27709

    To anyone who has actively participated in research, as I have...