Methods and Best Practice to Intercompare Dissolved Oxygen Sensors and Fluorometers/Turbidimeters for Oceanographic Applications

PubMed Central

Pensieri, Sara; Bozzano, Roberto; Schiano, M. Elisabetta; Ntoumas, Manolis; Potiris, Emmanouil; Frangoulis, Constantin; Podaras, Dimitrios; Petihakis, George

2016-01-01

In European seas, ocean monitoring strategies in terms of key parameters, space and time scale vary widely for a range of technical and economic reasons. Nonetheless, the growing interest in the ocean interior promotes the investigation of processes such as oxygen consumption, primary productivity and ocean acidity requiring that close attention is paid to the instruments in terms of measurement setup, configuration, calibration, maintenance procedures and quality assessment. To this aim, two separate hardware and software tools were developed in order to test and simultaneously intercompare several oxygen probes and fluorometers/turbidimeters, respectively in the same environmental conditions, with a configuration as close as possible to real in-situ deployment. The chamber designed to perform chlorophyll-a and turbidity tests allowed for the simultaneous acquisition of analogue and digital signals of several sensors at the same time, so it was sufficiently compact to be used in both laboratory and onboard vessels. Methodologies and best practice committed to the intercomparison of dissolved oxygen sensors and fluorometers/turbidimeters have been used, which aid in the promotion of interoperability to access key infrastructures, such as ocean observatories and calibration facilities. Results from laboratory tests as well as field tests in the Mediterranean Sea are presented. PMID:27196908

Satellite detection of phytoplankton export from the mid-Atlantic Bight during the 1979 spring bloom

NASA Technical Reports Server (NTRS)

Walsh, J. J.; Dieterle, D. A.; Esaias, W. E.

1986-01-01

Analysis of Coastal Zone Color Scanner (CZCS) imagery confirms shipboard and in situ moored fluorometer observations of resuspension of near-bottom chlorophyll within surface waters (1 to 10 m) by northwesterly wind events in the mid-Atlantic Bight. As much as 8 to 16 micrograms chl/l are found during these wind events from March to May, with a seasonal increase of algal biomass until onset of stratification of the water column. Rapid sinking or downwelling apparently occurs after subsequent wind events, however, such that the predominant surface chlorophyll pattern is approx. 0.5 to 1.5 micrograms/l over the continental shelf during most of the spring bloom. Perhaps half of the chlorophyll increase observed by satellite during a wind resuspension event represents in-situ production during the 4 to 5 day interval, with the remainder attributed to accumulation of algal biomass previously produced and temporarily stored within near-bottom water. Present calculations suggest that about 10% of the primary production of the spring bloom may be exported as ungrazed phytoplankton carbon from mid-Atlantic shelf waters to those of the continental slope.

Use of a Fluorometric Imaging Plate Reader in high-throughput screening

NASA Astrophysics Data System (ADS)

Groebe, Duncan R.; Gopalakrishnan, Sujatha; Hahn, Holly; Warrior, Usha; Traphagen, Linda; Burns, David J.

1999-04-01

High-throughput screening (HTS) efforts at Abbott Laboratories have been greatly facilitated by the use of a Fluorometric Imaging Plate Reader. The FLIPR consists of an incubated cabinet with integrated 96-channel pipettor and fluorometer. An argon laser is used to excite fluorophores in a 96-well microtiter plate and the emitted fluorometer. An argon laser is used to excite fluorophores in a 96-well microtiter plate and the emitted fluorescence is imaged by a cooled CCD camera. The image data is downloaded from the camera and processed to average the signal form each well of the microtiter pate for each time point. The data is presented in real time on the computer screen, facilitating interpretation and trouble-shooting. In addition to fluorescence, the camera can also detect luminescence form firefly luciferase.

The structure of the microbial communities in low-moor and high-moor peat bogs of Tomsk oblast

NASA Astrophysics Data System (ADS)

Dobrovol'skaya, T. G.; Golovchenko, A. V.; Kukharenko, O. S.; Yakushev, A. V.; Semenova, T. A.; Inisheva, L. A.

2012-03-01

The number, structure, and physical state of the microbial communities in high-moor and low-moor peat bogs were compared. Distinct differences in these characteristics were revealed. The microbial biomass in the high-moor peat exceeded that in the low-moor peat by 2-9 times. Fungi predominated in the high-moor peat, whereas bacteria were the dominant microorganisms in the low-moor peat. The micromycetal complexes of the high-moor peat were characterized by a high portion of dark-colored representatives; the complexes of the low-moor peat were dominated by fast-growing fungi. The species of the Penicillum genus were dominant in the high-moor peat; the species of Trichoderma were abundant in the low-moor peat. In the former, the bacteria were distinguished as minor components; in the latter, they predominated in the saprotrophic bacterial complex. In the high-moor peat, the microorganisms were represented by bacilli, while, in the low-moor peat, by cytophages, myxobacteria, and actinobacteria. The different physiological states of the bacteria in the studied objects reflecting the duration of the lag phase and the readiness of the metabolic system to consume different substrates were demonstrated for the first time. The relationships between the trophic characteristics of bacterial habitats and the capacity of the bacteria to consume substrates were established.

Fluorometric procedures for dye tracing

USGS Publications Warehouse

Wilson, James F.; Cobb, Ernest D.; Kilpatrick, F.A.

1986-01-01

This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The advantages of dye tracing are (1) low detection and measurement limits and (2) simplicity and accuracy in measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section on aerial photography is included because of its possible use to supplement ground-level fluorometry.

Fluorometric procedures for dye tracing

USGS Publications Warehouse

Wilson, James F.

1968-01-01

This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The advantages of dye tracing are (1) low detection and measurement limits and (2) simplicity and accuracy in measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section on aerial photography is included because of its possible use to supplement ground-level fluorometry.

Fluorometric procedures for dye tracing

USGS Publications Warehouse

Wilson, James E.; Cobb, Ernest D.; Kilpatrick, Frederick A.

1984-01-01

This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The outstanding characteristics of dye tracing are: (1) the low detection and measurement limits, and (2) the simplicity and accuracy of measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a general guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section is included on aerial photography because of its possible use to supplement ground-level fluorometry.

Smart oxygen cuvette for optical monitoring of dissolved oxygen in biological blood samples

NASA Astrophysics Data System (ADS)

Dabhi, Harish; Alla, Suresh Kumar; Shahriari, Mahmoud R.

2010-02-01

A smart Oxygen Cuvette is developed by coating the inner surface of a cuvette with oxygen sensitive thin film material. The coating is glass like sol-gel based sensor that has an embedded ruthenium compound in the glass film. The fluorescence of the ruthenium is quenched depending on the oxygen level. Ocean Optics phase fluorometer, NeoFox is used to measure this rate of fluorescence quenching and computes it for the amount of oxygen present. Multimode optical fibers are used for transportation of light from an LED source to cuvette and from cuvette to phase fluorometer. This new oxygen sensing system yields an inexpensive solution for monitoring the dissolved oxygen in samples for biological and medical applications. In addition to desktop fluorometers, smart oxygen cuvettes can be used with the Ocean Optics handheld Fluorometers, NeoFox Sport. The Smart Oxygen Cuvettes provide a resolution of 4PPB units, an accuracy of less than 5% of the reading, and 90% response in less than 10 seconds.

Great Lakes Demonstration 2

DTIC Science & Technology

2012-06-01

A-8 Figure A-12. Laser fluorometer...District Response Advisory Team DRMM Dynamic Risk Management Model EPA Environmental Protection Agency FL Laser fluorometer FOSC Federal On-Scene...this tactic. During this evolution the Hollyhock experimented applying its ice-breaking capabilities to cut channels and pockets into the ice for oil

21 CFR 862.2560 - Fluorometer for clinical use.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Fluorometer for clinical use. 862.2560 Section 862.2560 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Laboratory Instruments § 862...

21 CFR 862.2560 - Fluorometer for clinical use.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Fluorometer for clinical use. 862.2560 Section 862.2560 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Laboratory Instruments § 862...

21 CFR 862.2560 - Fluorometer for clinical use.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Fluorometer for clinical use. 862.2560 Section 862.2560 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Laboratory Instruments § 862...

21 CFR 862.2560 - Fluorometer for clinical use.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Fluorometer for clinical use. 862.2560 Section 862.2560 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Laboratory Instruments § 862...

Application of the fiber-optic perfusion fluorometer to absorption and exsorption studies in hairless mouse skin.

PubMed

Shackleford, J M; Yielding, K L

1987-09-01

This study was undertaken to test the fiber-optic perfusion fluorometer as a direct means of evaluating skin absorption and exsorption in hairless mice. Skin-barrier compromise was accomplished in the absorption experiments by application of dimethyl sulfoxide to the skin surface or by partial removal of the stratum corneum with sticky tape. Absorbed fluorescein was measured easily in unanesthetized control (skin-barrier intact) and experimental mice. Unabsorbed chemical did not fluoresce 15 minutes after application, although it was present on the surface of the skin as a dry powder. The time course of fluorescein elimination from the skin was related to a rapid phase (vascular removal) and a slow phase (reservoir entrapment). In the exsorption experiments the fluorescein was injected intraperitoneally. Back skin on the right side was swabbed with either dimethyl sulfoxide or 1% capsaicin in alcohol prior to the injections, and differences in skin fluorescence on the left (control) and right sides were recorded. One application of dimethyl sulfoxide or capsaicin increased the level of skin exsorption. Three applications of dimethyl sulfoxide almost doubled the amount of exsorbed dye, whereas three applications of the capsaicin inhibited the exsorption process. It was concluded that the fiber-optic perfusion fluorometer provides an excellent technique in support of other methods of investigating the skin.

Motion and dynamic responses of a semisubmersible in freak waves

NASA Astrophysics Data System (ADS)

Li, Xin; Deng, Yan-fei; Li, Lei; Tian, Xin-liang; Li, Jun

2017-12-01

The present research aims at clarifying the effects of freak wave on the motion and dynamic responses of a semisubmersible. To reveal the effects of mooring stiffness, two mooring systems were employed in the model tests and time-domain simulations. The 6-DOF motion responses and mooring tensions have been measured and the 3-DOF motions of fairleads were calculated as well. From the time series, trajectories and statistics information, the interactions between the freak wave and the semisubmersible have been demonstrated and the effects of mooring stiffness have been identified. The shortage of numerical simulations based on 3D potential flow theory is presented. Results show that the freak wave is likely to cause large horizontal motions for soft mooring system and to result in extremely large mooring tensions for tight mooring system. Therefore, the freak wave is a real threat for the marine structure, which needs to be carefully considered at design stage.

In situ monitoring of tracer tests: how to distinguish tracer recovery from natural background

NASA Astrophysics Data System (ADS)

Bailly-Comte, V.; Durepaire, X.; Batiot-Guilhe, C.; Schnegg, P.-A.

2018-03-01

Hydrogeological tracer tests are primarily conducted with fluorescent tracers. Field fluorometers make it possible to monitor tracers at very low concentrations (<1 ppb) and at high frequency. However, changes in natural fluorescence at a site resulting from variations of dissolved and suspended inorganic and organic material may compromise the measurement of useful signals, thereby limiting the chances of identifying or quantifying the real tracer recovery. An elevated natural signal can mask small concentrations of the tracer while its variability can give the impression of a false recovery. This article shows how the use of a combination of several continuous measurements at different wavelengths allows a better extraction of the natural signal. Field multispectral fluorometers were installed at two Mediterranean karst outlets; both drain carbonate systems but have different environmental conditions. The fluorometers functioned over several hydrologic cycles, in periods affected or not by artificial tracers, making it possible to observe natural signal variations at these sites. The optical properties of this type of field fluorometer were used to calculate the spectral response of the different optics of the measuring probe. These responses, superimposed on three-dimensional excitation/emission matrices produced from laboratory fluorescence measurements, allowed an understanding of what the fluorometer sees under natural flow conditions. The result is an innovative method for correcting artificial tracer results. This type of correction makes it possible to fine-tune the effect of natural background variation on tracer recovery curves for a clear identification of the tracer presence and a more precise quantification of its recovery.

Simple and Inexpensive 3D Printed Filter Fluorometer Designs: User-Friendly Instrument Models for Laboratory Learning and Outreach Activities

ERIC Educational Resources Information Center

Porter, Lon A., Jr.; Chapman, Cole A.; Alaniz, Jacob A.

2017-01-01

In this work, a versatile and user-friendly selection of stereolithography (STL) files and computer-aided design (CAD) models are shared to assist educators and students in the production of simple and inexpensive 3D printed filter fluorometer instruments. These devices are effective resources for supporting active learners in the exploration of…

Fluorometer with a quartz-rod waveguide-integrating sphere configuration to measure evanescent-field luminescence

USDA-ARS?s Scientific Manuscript database

A fluorometer was designed to measure evanescent-field luminescence. A quartz-rod waveguide (d = 2 mm) was installed coaxally inside a cylindrical flow-through cell (id = 2.3 mm, od = 6.3 mm, l = 116 mm). An excitation beam from a UV LED or a miniature xenon flashlamp was focused by a ball lens and ...

It's Time to Redefine Moore's Law Again

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeBenedictis, Erik P.

The familiar story of Moore's law is actually inaccurate. Here, this article corrects the story, leading to different projections for the future. Moore's law is a fluid idea whose definition changes over time. It thus doesn't have the ability to "end," as is popularly reported, but merely takes different forms as the semiconductor and computer industries evolve.

It's Time to Redefine Moore's Law Again

DOE PAGES

DeBenedictis, Erik P.

2017-02-06

The familiar story of Moore's law is actually inaccurate. Here, this article corrects the story, leading to different projections for the future. Moore's law is a fluid idea whose definition changes over time. It thus doesn't have the ability to "end," as is popularly reported, but merely takes different forms as the semiconductor and computer industries evolve.

Time series pCO2 at a coastal mooring: Internal consistency, seasonal cycles, and interannual variability

NASA Astrophysics Data System (ADS)

Reimer, Janet J.; Cai, Wei-Jun; Xue, Liang; Vargas, Rodrigo; Noakes, Scott; Hu, Xinping; Signorini, Sergio R.; Mathis, Jeremy T.; Feely, Richard A.; Sutton, Adrienne J.; Sabine, Christopher; Musielewicz, Sylvia; Chen, Baoshan; Wanninkhof, Rik

2017-08-01

Marine carbonate system monitoring programs often consist of multiple observational methods that include underway cruise data, moored autonomous time series, and discrete water bottle samples. Monitored parameters include all, or some of the following: partial pressure of CO2 of the water (pCO2w) and air, dissolved inorganic carbon (DIC), total alkalinity (TA), and pH. Any combination of at least two of the aforementioned parameters can be used to calculate the others. In this study at the Gray's Reef (GR) mooring in the South Atlantic Bight (SAB) we: examine the internal consistency of pCO2w from underway cruise, moored autonomous time series, and calculated from bottle samples (DIC-TA pairing); describe the seasonal to interannual pCO2w time series variability and air-sea flux (FCO2), as well as describe the potential sources of pCO2w variability; and determine the source/sink for atmospheric pCO2. Over the 8.5 years of GR mooring time series, mooring-underway and mooring-bottle calculated-pCO2w strongly correlate with r-values > 0.90. pCO2w and FCO2 time series follow seasonal thermal patterns; however, seasonal non-thermal processes, such as terrestrial export, net biological production, and air-sea exchange also influence variability. The linear slope of time series pCO2w increases by 5.2 ± 1.4 μatm y-1 with FCO2 increasing 51-70 mmol m-2 y-1. The net FCO2 sign can switch interannually with the magnitude varying greatly. Non-thermal pCO2w is also increasing over the time series, likely indicating that terrestrial export and net biological processes drive the long term pCO2w increase.

Development of miniaturized submersible fluorometers for the detection of aromatic hydrocarbons in marine waters

NASA Astrophysics Data System (ADS)

Tedetti, Marc; Bachet, Caroline; Joffre, Pascal; Ferretto, Nicolas; Guigue, Catherine; Goutx, Madeleine

2014-05-01

Polycyclic aromatic hydrocarbons (PAHs) are among the most widespread organic contaminants in aquatic environments. Due to their physico-chemical properties, PAHs are persistent and mobile, can strongly bioaccumulate in food chains and are harmful to living organisms. They are thus recognized by various international organizations as priority contaminants and are included in the list of 45 priority regulated substances by the European Union. Because of their aromatic structure, PAHs are "optically active" and have inherent fluorescence properties in the ultraviolet (UV) spectral domain (200-400 nm). Therefore, UV fluorescence spectroscopy has been successfully used to develop PAH sensors (i.e. UV fluorometers). Currently, five UV submersible fluorometers are commercially available for in situ measurements of PAHs: EnviroFlu-HC (TriOS Optical Sensors, Germany), Hydrocarbon Fluorometer (Sea & Sun Technology, Germany), HydroC ™ / PAH (CONTROS, Germany), UviLux AquaTracka (Chelsea Technology Group, UK) and Cyclops-7 (Turner Designs, US). These UV fluorometers are all dedicated to the measurement of phenanthrene (λEx /λEm: 255/360 nm), one of the most abundant and fluorescent PAHs found in the aquatic environment. In this study, we developed original, miniaturized submersible fluorometers based on deep UV light-emitting diodes (LEDs) for simultaneous measurements of two PAHs of interest: the MiniFluo-UV 1 for the detection of phenanthrene (PHE, at λEx /λEm: 255/360 nm) and naphthalene (NAP, at λEx /λEm: 270/340 nm), and the MiniFluo-UV 2 for the detection of fluorene (FLU, at λEx /λEm: 255/315 nm) and pyrene (PYR, at λEx /λEm: 270/380 nm). The MiniFluo-UV sensors have several features: measurements of two PAHs at the same time, small size (puck format, 80 x 60 mm), very low energy consumption (500 mW at 12V), LED monitoring, analog and numerical communication modes. The two MiniFluo-UV sensors were first tested in the laboratory: 1) on standard solutions of PHE, NAP, FLU and PYR in the range 0.1-100 µg l-1 and 2) on a water soluble fraction (WSF) of crude oil diluted in 0.2 µm filtered seawater (0 to 50% of WSF in seawater). Then, the MiniFluo-UV sensors were mounted onto a conductivity temperature depth (CTD) vertical profiler and tested at sea. Several profiles were performed in the Bay of Marseilles, in different harbours and hydrocarbon-impacted sites. The MiniFluo-UV measurements performed in the laboratory and in the field were associated with spectrofluorometric (EEM/PARAFAC) and/or chromatographic (GC-MS) analyses. The result obtained show that the MiniFluo-UV are pertinent and efficient tool for monitoring hydrocarbon pollutions in the marine environment. This work is a contribution of three projects labelled by the Competitivity Cluster Mer PACA: FUI SEA EXPLORER, DGCIS - Eco industries VASQUE (PI: ACSA-ALCEN, Meyreuil, France) and ANR - ECOTECH IBISCUS (PI: M. Goutx, MIO, Marseille, France).

Fiber-optic filter fluorometer for emission detection of Protoporphyrin IX and its direct precursors - A preliminary study for improved Photodynamic Therapy applications

NASA Astrophysics Data System (ADS)

Landes, Rainer; Illanes, Alfredo; van Oepen, Alexander; Goeppner, Daniela; Gollnick, Harald; Friebe, Michael

2018-03-01

In this work we present first results of a laboratory manufactured filter-fluorometer to study differences in intensity and position of the main peaks of three porphyrins that appear during the Heme-Synthesis. Porphyrins play a major role in Photodynamic Therapy (PDT) for cancer treatment. Within the Heme-Synthesis, Porphyrins such as Protoporphyrin IX (PPIX) and its two precursors Coproporphyrin III (CPIII) and Uroporphyrin III (UPIII) represent photochemical agents that can interact with light to show fluorescence or generate Reactive Oxygen Species (ROS) to destroy cells. A major problem that arises is determining the ideal time slot to begin treatment after drug application. Our work is meant to show a way to solve this problem by looking at concentration changes of precursors appearing in Heme-Synthesis and using these changes to predict the occurence of PPIX inside the mitochondria.

Marine Arctic Ecosystem Study (MARES) - An Integrated Approach to the Dynamics of the Beaufort Sea

NASA Astrophysics Data System (ADS)

Wiese, F. K.; Gryba, R.; Kelly, B. P.

2016-02-01

MARES is an integrated ecosystem research initiative coordinated and planned by the Bureau of Ocean Energy Management, the Office of Naval Research, the National Aeronautics and Space Administration, the U.S. Coast Guard, and Shell through the National Oceanographic Partnership Program. The overarching goal is to advance our knowledge of the structure and function of the Beaufort Sea marine ecosystem so as to link atmospheric and oceanic drivers to sea ice patterns and marine mammal distribution and availability to local subsistence communities. The study, funded in 2014, focuses on the marine ecosystem along the Beaufort Sea shelf from Barrow, Alaska to the Mackenzie River delta in Canada and is scheduled to include bio-physical moorings along the US-Canadian border, glider deployments packed with bio-physical sensors, tagging of whales and ice-associated seals with satellite CTD-Fluorometer tags, biophysical and chemical cruises including the measurement and characterization of hydrography, ice, nutrients, primary and secondary production, carbon budgets, benthic fauna, fish, as well as analysis of freshwater input and chemical loadings, and ecosystem modeling. This presentation will focus on preliminary results from the ice seal tagging that started in the summer of 2015 and describe some of the planning and possibilities for partnerships for the more comprehensive 2016 field season and beyond.

Processes Affecting the Variability of Fluorescence Signals from Benthic Targets in Shallow Waters

DTIC Science & Technology

1998-09-30

analysis of zooxanthellae isolated from coral samples. We examined fluorescence lifetimes from benthic targets using femtosecond laser based Single...a temporal resolution 5 ps. The laser set-up was employed for laboratory studies of fluorescence lifetimes from model targets such as zooxanthellae ...seagrasses. Over 200 measurements on isolated zooxanthellae were conducted with a bench-top FRR fluorometer and Phase Shift Fluorometer. During the CoBOP-98

Application of the in situ three channel WET Star fluorometer to characterize FDOM sources and determine water masses in the Nordic Seas

NASA Astrophysics Data System (ADS)

Raczkowska, Anna; Kowalczuk, Piotr; Sagan, Slawomir; Zablocka, Monika; Stedmon, Colin; Granskog, Mats

2017-04-01

Water masses exchange between the Atlantic Ocean and the Arctic Ocean occurs in Nordic Seas and this process represents a crucial component of the northern hemisphere climate system. Nordic Seas are dominated by Atlantic Waters (AW) and Polar Waters (PW) and water formed in the mixing process or local modifications like precipitation and sea-ice melt. Classification of water masses only on the basis of temperature, salinity or density not take into account different sources of fresh water in the Nordic Seas. In this study we propose that measured signal from the in situ three channel WET Star fluorometer could be a useful tool for characterization of dissolved organic matter (DOM) and refinement of water masses classification . Spectral properties of Chromophoric Dissolved Organic Matter and Fluorescent Dissolved Organic Matter (CDOM and FDOM) were characterized in different water masses along a section across the Fram Strait at 79°N as well as in the Nordic Seas in 2014 and 2015. Observations of CDOM and FDOM were carried out with use of in situ three channel WET Labs WET Star fluorometer and Excitation Emission Matrix spectra (EEMs) measured in the water samples. The WET Labs WET Star three channels in situ fluorometer was designed to measure emission of humic and protein-like FDOM fractions. Instruments output was calibrated against respective fluorescence intensity of EMMs measured with use of Aqualog fluorometer (Horiba Scientific) at excitation and emission ranges corresponding to in situ fluorometer channels. The correctness of the calibration was confirmed by empirical linear relationship between WET Star in situ fluorescence intensities and aCDOM(350) derived from water samples. Measured WET Star fluorometer signal enabled to asses distribution of different FDOM fractions in the Nordic Seas. The distribution of humic-like fluorescence intensity in the function of salinity revealed three distinct mixing curves: the first indicates mixing between surface PW diluted by sea ice melt with core of PW from East Greenland Current, the second imply transition from PW to AW, the third curve is an indicator of modification of AW by sea ice melting in the area of Western and Northern Spitsbergen Shelf. Furthermore, fluorescence intensities of humic-like DOM fraction is very low and remains practically constant in the core of AW. In the AW there is a strong subsurface maximum of chlorophyll a fluorescence which was aligned with protein-like fraction of DOM. The linear relationship between phytoplankton fluorescence and fluorescence intensity of protein-like DOM fraction proved that phytoplankton was primary source of protein like fraction of DOM in the AW.

Probabilistic analysis and fatigue damage assessment of offshore mooring system due to non-Gaussian bimodal tension processes

NASA Astrophysics Data System (ADS)

Chang, Anteng; Li, Huajun; Wang, Shuqing; Du, Junfeng

2017-08-01

Both wave-frequency (WF) and low-frequency (LF) components of mooring tension are in principle non-Gaussian due to nonlinearities in the dynamic system. This paper conducts a comprehensive investigation of applicable probability density functions (PDFs) of mooring tension amplitudes used to assess mooring-line fatigue damage via the spectral method. Short-term statistical characteristics of mooring-line tension responses are firstly investigated, in which the discrepancy arising from Gaussian approximation is revealed by comparing kurtosis and skewness coefficients. Several distribution functions based on present analytical spectral methods are selected to express the statistical distribution of the mooring-line tension amplitudes. Results indicate that the Gamma-type distribution and a linear combination of Dirlik and Tovo-Benasciutti formulas are suitable for separate WF and LF mooring tension components. A novel parametric method based on nonlinear transformations and stochastic optimization is then proposed to increase the effectiveness of mooring-line fatigue assessment due to non-Gaussian bimodal tension responses. Using time domain simulation as a benchmark, its accuracy is further validated using a numerical case study of a moored semi-submersible platform.

The Marine Light-Mixed Layer Experiment Cruise and Data Report: R/V Endeavor Cruise EN-224, Mooring Deployment, 27 April-1 May 1991: Cruise EN-227, Mooring Recovery, 5-23 September 1991

DTIC Science & Technology

1993-05-01

C 1/2 time average Thermometrics Measured during first 4K@ 250 C half of avg. period. Air Temperature Thermistor -10 to +350 C 1/2 time average...lack of a neoprene pad oil the bottom mounting bracket base plate, allowing tLe aluminum case to directly touch the bracket. The mooring 3 hardware

Selection and optimization of mooring cables on floating platform for special purposes

NASA Astrophysics Data System (ADS)

Ma, Guang-ying; Yao, Yun-long; Zhao, Chen-yao

2017-08-01

This paper studied a new type of assembled marine floating platform for special purposes. The selection and optimization of mooring cables on the floating platform are studied. By using ANSYS AQWA software, the hydrodynamic model of the platform was established to calculate the time history response of the platform motion under complex water environments, such as wind, wave, current and mooring. On this basis, motion response and cable tension were calculated with different cable mooring states under the designed environmental load. Finally, the best mooring scheme to meet the cable strength requirements was proposed, which can lower the motion amplitude of the platform effectively.

Use of a portable time-resolved fluorometer to determine oxytetracycline residue in four fruit crops

USDA-ARS?s Scientific Manuscript database

Worldwide, oxytetracycline (OTC) is used in fruit and vegetable crops to prevent and treat bacteria diseases. In the U.S., the Environmental Protection Agency approved its use in apple, pear, peach, and nectarine, and set tolerance at 350 ng/g. OTC residues in 12 varieties of these fruits are determ...

High Frequency, Long Time Series Measurements from the Bermuda Testbed Mooring in Support of SIMBIOS. Chapter 8

NASA Technical Reports Server (NTRS)

Dickey, Tommy; Dobeck, Laura; Sigurdson, David; Zedler, Sarah; Manov, Derek; Yu, Xuri

2001-01-01

It has been recognized that optical moorings are important platforms for the validation of Sea-Viewing Wide Field-of-view Sensor (SeaWiFS). It was recommended that optical moorings be maintained in order to: (1) provide long-term time series comparisons between in situ and SeaWIFS measurements of normalized water-leaving radiance; (2) develop and test algorithms for pigment biomass and phytoplankton primary productivity; and (3) provide long-term, virtually continuous in situ observations which can be used to determine and optimize the accuracy of derived satellite products. These applications require the use of in situ radiometers for long periods of time to evaluate and correct for inherent satellite undersampling (aliasing and biasing) and degradation of satellite color sensors (e.g., drifts as experienced by the Coastal Zone Color Scanner). The Bermuda Testbed Mooring (BTM) program was initiated in 1994 at a site located about 80km southeast of Bermuda in waters of about 4530 m depth. In August 1997, with NASA's support, we started to provide the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) program with large volumes of high frequency, long-term time-series bio-optical data from the BTM for SeaWiFS satellite ocean color groundtruthing and algorithm development. This NASA supported portion of the BTM activity spanned three years and covered five BTM deployments. During these three years, the quality of radiometric data has improved dramatically. Excellent agreement between BTM moored data and both SeaWiFS and nearby ship profile radiometric data demonstrate that technical advances in the moored optical observations have reduced the major difficulties that moored platforms face: biofouling and less frequent calibration.

A set of optical methods for studying marine phytoplankton

NASA Astrophysics Data System (ADS)

Konyukhov, I. V.; Glukhovets, D. I.

2017-05-01

The results of integrated optical measurements of Black Sea water samples using a spectrophotometer, laser spectrometer, and fluorometer with pulse-modulated excitation light are discussed. A linear correlation between the intensities of chlorophyll absorption at 673 nm and chlorophyll fluorescence (680-750 nm) is observed. Phycoerythrin-containing organisms are recorded in phytoplankton in layers below 20 m. The data of 1-week monitoring of phytoplankton abundance and functional activity in Golubaya Bay with a Mega-25 flow fluorometer are described.

Lightweight Fiber Optic Gas Sensor for Monitoring Regenerative Food Production

NASA Technical Reports Server (NTRS)

Schmidlin, Edward; Goswami, Kisholoy

1995-01-01

In this final report, Physical Optics Corporation (POC) describes its development of sensors for oxygen, carbon dioxide, and relative humidity. POC has constructed a phase fluorometer that can detect oxygen over the full concentration range from 0 percent to 100 percent. Phase-based measurements offer distinct advantages, such as immunity to source fluctuation, photobleaching, and leaching. All optics, optoelectronics, power supply, and the printed circuit board are included in a single box; the only external connections to the fluorometer are the optical fiber sensor and a power cord. The indicator-based carbon dioxide sensor is also suitable for short-term and discrete measurements over the concentration range from 0 percent to 100 percent. The optical fiber-based humidity sensor contains a porous core for direct interaction of the light beam with water vapor within fiber pores; the detection range for the humidity sensor is 10 percent to 100 percent, and response time is under five minutes. POC is currently pursuing the commercialization of these oxygen and carbon dioxide sensors for environmental applications.

Use of multi-disciplinary mooring data to extend intermittent OA observations from ship surveys

NASA Astrophysics Data System (ADS)

Send, U.; Ohman, M. D.; Martz, T. R.; Dickson, A. G.; Feely, R. A.; Demer, D.; Washburn, L.

2012-12-01

Ship surveys along the US West Coast have provided valuable insight into the conditions and changes in the water column that affect the ocean acidification state. Examples are the decades of CalCOFI sampling off southern California, and the West Coast ship survey published in Feely et al 2008. What is lacking in these observations is a description of the temporal variability of the conditions observed, and of the processes at work that lead to observed conditions or changes. Multi-disciplinary moorings are ideally suited for adding this dimension to the available observations which is critical for an understanding of the OA mechanisms. One example is the occurrence of corrosive water near the seafloor on the continental shelf, which was found in the Feely et al survey. Time series data from a mooring off Del Mar, California, with oxygen and pH sensors near the bottom in 100m depth show the frequency and intensity of corrosive and hypoxic conditions there, and how they relate to physical processes (cross-shelf and along-shelf flow), biological conditions, and climate processes (here La Nina). In the upwelling and open-ocean regimes off Pt. Conception two moorings (CCE1, CCE2) have been collecting data since early 2009 and 2010, respectively, co-located with CalCOFI stations and CCE LTER cardinal sites for ship observations. A glider also routinely passes by these moorings (along CalCOFI line 80). The moorings carry physical, oxygen, pH, pCO2, nutrient, and ecosystem sensors (chlorophyll fluorescence, water column irradiance absorption, acoustic backscatter) and telemeter most data in real-time. The mooring time series show the variability of OA parameters on daily, weekly, seasonal, and interannual time scales, and in the context of the spatial and historical sampling from ships. The multi-disciplinary sensor suite allows to study the forcing of the OA variability on those various time scales, and the impact on the ecosystem. Combined with the spatial information from ships, and with the physical and biological variables observed at the mooring, we can also start to estimate individual terms in a carbon budget. Examples for these applications will be given in the presentation.

Multiple protocol fluorometer and method

DOEpatents

Kolber, Zbigniew S.; Falkowski, Paul G.

2000-09-19

A multiple protocol fluorometer measures photosynthetic parameters of phytoplankton and higher plants using actively stimulated fluorescence protocols. The measured parameters include spectrally-resolved functional and optical absorption cross sections of PSII, extent of energy transfer between reaction centers of PSII, F.sub.0 (minimal), F.sub.m (maximal) and F.sub.v (variable) components of PSII fluorescence, photochemical and non-photochemical quenching, size of the plastoquinone (PQ) pool, and the kinetics of electron transport between Q.sub.a and PQ pool and between PQ pool and PSI. The multiple protocol fluorometer, in one embodiment, is equipped with an excitation source having a controlled spectral output range between 420 nm and 555 nm and capable of generating flashlets having a duration of 0.125-32 .mu.s, an interval between 0.5 .mu.s and 2 seconds, and peak optical power of up to 2 W/cm.sup.2. The excitation source is also capable of generating, simultaneous with the flashlets, a controlled continuous, background illumination.

Fluorometry as a bacterial source tracking tool in coastal watersheds, Trinidad, CA

Treesearch

Trever Parker; Andrew Stubblefield

2012-01-01

Bacterial counts have long been used as indicators of water pollution that may affect public health. By themselves, bacteria are indicators only and can not be used to identify the source of the pollutant for remediation efforts. Methods of microbial source tracking are generally time consuming, labor intensive and expensive. As an alternative, a fluorometer can be...

SeaWiFS technical report series. Volume 32: Level-3 SeaWiFS data products. Spatial and temporal binning algorithms

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor); Acker, James G. (Editor); Campbell, Janet W.; Blaisdell, John M.; Darzi, Michael

1995-01-01

The level-3 data products from the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) are statistical data sets derived from level-2 data. Each data set will be based on a fixed global grid of equal-area bins that are approximately 9 x 9 sq km. Statistics available for each bin include the sum and sum of squares of the natural logarithm of derived level-2 geophysical variables where sums are accumulated over a binning period. Operationally, products with binning periods of 1 day, 8 days, 1 month, and 1 year will be produced and archived. From these accumulated values and for each bin, estimates of the mean, standard deviation, median, and mode may be derived for each geophysical variable. This report contains two major parts: the first (Section 2) is intended as a users' guide for level-3 SeaWiFS data products. It contains an overview of level-0 to level-3 data processing, a discussion of important statistical considerations when using level-3 data, and details of how to use the level-3 data. The second part (Section 3) presents a comparative statistical study of several binning algorithms based on CZCS and moored fluorometer data. The operational binning algorithms were selected based on the results of this study.

Sustaining Moore's law with 3D chips

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeBenedictis, Erik P.; Badaroglu, Mustafa; Chen, An

Here, rather than continue the expensive and time-consuming quest for transistor replacement, the authors argue that 3D chips coupled with new computer architectures can keep Moore's law on its traditional scaling path.

Sustaining Moore's law with 3D chips

DOE PAGES

DeBenedictis, Erik P.; Badaroglu, Mustafa; Chen, An; ...

2017-08-01

Here, rather than continue the expensive and time-consuming quest for transistor replacement, the authors argue that 3D chips coupled with new computer architectures can keep Moore's law on its traditional scaling path.

Center for Coastline Security Technology, Year-2

DTIC Science & Technology

2007-05-01

set to a constant value of n = 7.25 Hz (435 RPM) giving an advance ratio of J = U/nD = 0.31 (assuming a vehicle wake deficit of 0.9 UB∞ B), the yaw... noise characteristics (Case #4). Figures for Section 2.9 Figure 2.9.1: WETStar Fluorometer. Figure 2.9.2: Proposed design schematic no. 1...consecutives states and )(kw is the state noise [10]. F defines the relation between the state vector )(kX at time k and the state vector at time k

Making Sense of Plant Health

NASA Technical Reports Server (NTRS)

2001-01-01

Ciencia, Inc. created a new device, known as a Portable Photosynthesis Analyzer, or Phase Fluorometer, that provides real-time data about the photochemical efficiency of phytoplankton and other plant forms. The commercial version of this technology is used for photosynthesis research and offers major benefits to the field of life science. This new instrument is the first portable instrument of its kind. Through a license agreement with Ciencia, Oriel Instruments, of Stratford, Connecticut, manufactures and markets the commercial version of the instrument under the name LifeSense.TMLifeSense is a 70 MHz single-frequency fluorometer that offers unrivaled capabilities for fluorescence lifetime sensing and analysis. LifeSense provides information about all varieties of photosynthetic systems. Photosynthesis research contributes important health assessments about the plant, be it phytoplankton or a higher form of plant life. With its unique sensing capabilities, LifeSense furnishes data regarding the yield of a plant's photochemistry, as well as its levels of photosynthetic activity. The user can then gain an extremely accurate estimate of the plant's chlorophyll biomass, primary production rates, and a general overview of the plant's physiological condition.

Enhanced optical fiber fluorometer using a periodic perturbation in the fiber core

NASA Astrophysics Data System (ADS)

Chiniforooshan, Yasser; Bock, Wojtek J.; Ma, Jianjun

2013-10-01

Tracing of the specific chemicals and biological agents in a solution is becoming a vital interest in health, security and safety industries. Although a number of standard laboratory-based testing systems exists for detecting such targets, but the fast, real-time and on-site methods could be more efficient and cost-effective. One of the most common ways to detect a target in the solution is to use the fluorophore molecules which will be selectively attached to the targets and will emit or quench the fluorescence in presence of the target. The fiber-optic fluorometers are developed for inexpensive and portable detection. In this paper, we explain a novel multi-segment fiber structure which uses the periodic perturbation on the side-wall of a highly multi-mode fiber to enhance collecting the fluorescent light. This periodic perturbation is fabricated and optimized on the core of the fiber using a CO2 laser. The theoretical explanation to show the physical principle of the structure is followed by the experimental evidence of its functioning.

Fast repetition rate (FRR) fluorometer and method for measuring fluorescence and photosynthetic parameters

DOEpatents

Kolber, Zbigniew; Falkowski, Paul

1995-06-20

A fast repetition rate fluorometer device and method for measuring in vivo fluorescence of phytoplankton or higher plants chlorophyll and photosynthetic parameters of phytoplankton or higher plants by illuminating the phytoplankton or higher plants with a series of fast repetition rate excitation flashes effective to bring about and measure resultant changes in fluorescence yield of their Photosystem II. The series of fast repetition rate excitation flashes has a predetermined energy per flash and a rate greater than 10,000 Hz. Also, disclosed is a flasher circuit for producing the series of fast repetition rate flashes.

Tissue-based water quality biosensors for detecting chemical warfare agents

DOEpatents

Greenbaum, Elias [Oak Ridge, TN; Sanders, Charlene A [Knoxville, TN

2003-05-27

A water quality sensor for detecting the presence of at least one chemical or biological warfare agent includes: a cell; apparatus for introducing water into the cell and discharging water from the cell adapted for analyzing photosynthetic activity of naturally occurring, free-living, indigenous photosynthetic organisms in water; a fluorometer for measuring photosynthetic activity of naturally occurring, free-living, indigenous photosynthetic organisms drawn into the cell; and an electronics package that analyzes raw data from the fluorometer and emits a signal indicating the presence of at least one chemical or biological warfare agent in the water.

Variability of the Denmark Strait overflow: Moored time series from 1996-2011

NASA Astrophysics Data System (ADS)

Jochumsen, Kerstin; Quadfasel, Detlef; Valdimarsson, Heã°Inn; Jónsson, SteingríMur

2012-12-01

The Denmark Strait overflow provides about half of the total dense water overflow from the Nordic Seas into the North Atlantic Ocean. The velocity of the overflow has been monitored in the Strait with two moored Acoustic Doppler Current Profilers since 1996 with several interruptions due to mooring losses or instrument failure. So far, overflow transports were only calculated when data from both moorings were available. In this work, we introduce a linear model to fill gaps in the time series when data from only one instrument is available. The mean overflow transport is 3.4 Sv and exhibits a variance of 2.0 Sv2. No significant trend was detected in the time series. The highest variability in the transport is associated with the passage of mesoscale eddies with time scales of 2-10 days (associated with a variance of 1.5 Sv2). Seasonal variability is weak and explains less than 5% of the variance in all time series, which is in contrast to the strong seasonal cycle found in high resolution model simulations. Interannual variability is on the order of 10% of the mean. A relation to atmospheric forcing such as the local wind stress curl, as well as to larger scale phenomena, e.g. the North Atlantic Oscillation, is not detected. Since 2005 data from moored temperature, conductivity and pressure recorders have been available as well, monitoring the hydrographic variability at the bottom of Denmark Strait. In recent years the temperature time series of the Denmark Strait overflow revealed a cooling, while the salinity stayed nearly constant.

Technical note: GODESS - a profiling mooring in the Gotland Basin

NASA Astrophysics Data System (ADS)

Prien, Ralf D.; Schulz-Bull, Detlef E.

2016-07-01

This note describes a profiling mooring with an interdisciplinary suite of sensors taking profiles between 180 and 30 m depth. It consists of an underwater winch, moored below 180 m depth, and a profiling instrumentation platform. In its described setup it can take about 200 profiles at pre-programmed times or intervals with one set of batteries. This allows for studies over an extended period of time (e.g. two daily profiles over a time of 3 months). The Gotland Deep Environmental Sampling Station (GODESS) in the Eastern Gotland Basin of the Baltic Sea is aimed at investigations of redoxcline dynamics. The described system can be readily adapted to other research foci by changing the profiling instrumentation platform and its payload.

Verification of a rapid mooring and foundation design tool

DOE PAGES

Weller, Sam D.; Hardwick, Jon; Gomez, Steven; ...

2018-02-15

Marine renewable energy devices require mooring and foundation systems that suitable in terms of device operation and are also robust and cost effective. In the initial stages of mooring and foundation development a large number of possible configuration permutations exist. Filtering of unsuitable designs is possible using information specific to the deployment site (i.e. bathymetry, environmental conditions) and device (i.e. mooring and/or foundation system role and cable connection requirements). The identification of a final solution requires detailed analysis, which includes load cases based on extreme environmental statistics following certification guidance processes. Static and/or quasi-static modelling of the mooring and/or foundationmore » system serves as an intermediate design filtering stage enabling dynamic time-domain analysis to be focused on a small number of potential configurations. Mooring and foundation design is therefore reliant on logical decision making throughout this stage-gate process. The open-source DTOcean (Optimal Design Tools for Ocean Energy Arrays) Tool includes a mooring and foundation module, which automates the configuration selection process for fixed and floating wave and tidal energy devices. As far as the authors are aware, this is one of the first tools to be developed for the purpose of identifying potential solutions during the initial stages of marine renewable energy design. While the mooring and foundation module does not replace a full design assessment, it provides in addition to suitable configuration solutions, assessments in terms of reliability, economics and environmental impact. This article provides insight into the solution identification approach used by the module and features the verification of both the mooring system calculations and the foundation design using commercial software. Several case studies are investigated: a floating wave energy converter and several anchoring systems. It is demonstrated that the mooring and foundation module is able to provide device and/or site developers with rapid mooring and foundation design solutions to appropriate design criteria.« less

Verification of a rapid mooring and foundation design tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weller, Sam D.; Hardwick, Jon; Gomez, Steven

Marine renewable energy devices require mooring and foundation systems that suitable in terms of device operation and are also robust and cost effective. In the initial stages of mooring and foundation development a large number of possible configuration permutations exist. Filtering of unsuitable designs is possible using information specific to the deployment site (i.e. bathymetry, environmental conditions) and device (i.e. mooring and/or foundation system role and cable connection requirements). The identification of a final solution requires detailed analysis, which includes load cases based on extreme environmental statistics following certification guidance processes. Static and/or quasi-static modelling of the mooring and/or foundationmore » system serves as an intermediate design filtering stage enabling dynamic time-domain analysis to be focused on a small number of potential configurations. Mooring and foundation design is therefore reliant on logical decision making throughout this stage-gate process. The open-source DTOcean (Optimal Design Tools for Ocean Energy Arrays) Tool includes a mooring and foundation module, which automates the configuration selection process for fixed and floating wave and tidal energy devices. As far as the authors are aware, this is one of the first tools to be developed for the purpose of identifying potential solutions during the initial stages of marine renewable energy design. While the mooring and foundation module does not replace a full design assessment, it provides in addition to suitable configuration solutions, assessments in terms of reliability, economics and environmental impact. This article provides insight into the solution identification approach used by the module and features the verification of both the mooring system calculations and the foundation design using commercial software. Several case studies are investigated: a floating wave energy converter and several anchoring systems. It is demonstrated that the mooring and foundation module is able to provide device and/or site developers with rapid mooring and foundation design solutions to appropriate design criteria.« less

Electron requirements for carbon incorporation along a diel light cycle in three marine diatom species.

PubMed

Morelle, Jérôme; Claquin, Pascal

2018-02-23

Diatoms account for about 40% of primary production in highly productive ecosystems. The development of a new generation of fluorometers has made it possible to improve estimation of the electron transport rate from photosystem II, which, when coupled with the carbon incorporation rate enables estimation of the electrons required for carbon fixation. The aim of this study was to investigate the daily dynamics of these electron requirements as a function of the diel light cycle in three relevant diatom species and to apprehend if the method of estimating the electron transport rate can lead to different pictures of the dynamics. The results confirmed the species-dependent capacity for photoacclimation under increasing light levels. Despite daily variations in the photosynthetic parameters, the results of this study underline the low daily variability of the electron requirements estimated using functional absorption of the photosystem II compared to an estimation based on a specific absorption cross section of chlorophyll a. The stability of the electron requirements throughout the day would suggest it is potentially possible to estimate high-frequency primary production by using autonomous variable fluorescence measurements from ships-of-opportunity or moorings, without taking potential daily variation in this parameter into consideration, but this result has to be confirmed on natural phytoplankton assemblages. The results obtained in this study confirm the low electron requirements of diatoms to perform photosynthesis, and suggest a potential additional source of energy for carbon fixation, as recently described in the literature for this class.

Fast repetition rate (FRR) fluorometer and method for measuring fluorescence and photosynthetic parameters

DOEpatents

Kolber, Z.; Falkowski, P.

1995-06-20

A fast repetition rate fluorometer device and method for measuring in vivo fluorescence of phytoplankton or higher plants chlorophyll and photosynthetic parameters of phytoplankton or higher plants is revealed. The phytoplankton or higher plants are illuminated with a series of fast repetition rate excitation flashes effective to bring about and measure resultant changes in fluorescence yield of their Photosystem II. The series of fast repetition rate excitation flashes has a predetermined energy per flash and a rate greater than 10,000 Hz. Also, disclosed is a flasher circuit for producing the series of fast repetition rate flashes. 14 figs.

Macintosh/LabVIEW based control and data acquisition system for a single photon counting fluorometer

NASA Astrophysics Data System (ADS)

Stryjewski, Wieslaw J.

1991-08-01

A flexible software system has been developed for controlling fluorescence decay measurements using the virtual instrument approach offered by LabVIEW. The time-correlated single photon counting instrument operates under computer control in both manual and automatic mode. Implementation time was short and the equipment is now easier to use, reducing the training time required for new investigators. It is not difficult to customize the front panel or adapt the program to a different instrument. We found LabVIEW much more convenient to use for this application than traditional, textual computer languages.

First Year Observations of Antarctic Circumpolar Current Variability and Internal Wave Activity from the DIMES Mooring Array

NASA Astrophysics Data System (ADS)

Brearley, J. A.; Sheen, K. L.; Naveira-Garabato, A. C.

2012-04-01

A key component of DIMES (Diapycnal and Isopycnal Mixing Experiment in the Southern Ocean) is the deployment of a two-year cross-shaped mooring array in the Antarctic Circumpolar Current to the east of Drake Passage close to 57°W. Motivation for the cluster arises from the need to understand how eddies dissipate in the Southern Ocean, and specifically how much energy is extracted from the mesoscale by breaking internal waves, which in turn leads to turbulent mixing. The location of the mooring cluster was chosen to fulfil these objectives, being situated in a region of pronounced finestructure with high eddy kinetic energy and rough topography. The array, comprising 34 current meters and Microcats and a downward-looking ADCP, was first deployed in December 2009 and serviced in December 2010. Time series of current meter results from the most heavily-instrumented 'C' mooring indicate that a strong (up to 80 cms-1) surface-intensified north-eastward directed ACC occupies the region for most of the year, with over 85% of the variability in current speed being accounted for by equivalent barotropic fluctuations. A strong mean poleward heat flux is observed at the site, which compares favourably in magnitude with literature results from other ACC locations. Interestingly, four episodes of mid-depth (~2000 m) current speed maxima, each of a few days duration, were found during the 360-day time series, a situation also observed by the lowered ADCP during mooring servicing in December 2010. Early results indicate that these episodes, which coincide with time minima in stratification close to 2000 m, could profoundly influence the nature of eddy-internal wave interactions at these times. Quantification of the energy budget at the mooring cluster has been a key priority. When compared with previous moorings located in Drake Passage (Bryden, 1977), a near threefold-increase in mean eddy kinetic energy (EKE) is observed despite a small reduction in the mean kinetic energy between these sites. The magnitude of interactions between the available potential energy and EKE and between the EKE and mean kinetic energy are of similar magnitude to those observed in Drake Passage. Unfortunately, the collapse of two moorings early in 2010 has meant that second-year data will be required before the exchange of energy between the eddy and internal wave frequency bands can be rigorously quantified. However, data from the downward-looking ADCP between 2700 and 3400 m is starting to identify the important frequencies and mechanisms of internal wave activity.

Passive Autonomous Acoustic Monitoring of Marine Mammals: System Development Using Seaglider (Trademark)

DTIC Science & Technology

2015-01-30

plan was to run sg178 in offshore-onshore transects with one end at J. Hildebrand’s HARP mooring at approximately 47° 30’N, 125° 21’W. Seaglider sg179...was to survey along the Washington coast just offshore of the 1000m isobath, with significant time spent surveying atop the HARP mooring mentioned...operations. Figure 4. Surfacing positions of Seagliders S/N178 (green) and S/N179 (red) 11JUN-12JUL2012. HARP mooring locations (Wiggins, private

A rapid excitation-emission matrix fluorometer utilizing supercontinuum white light and acousto-optic tunable filters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Wenbo; Department of Dermatology and Skin Science, University of British Columbia, 835 West 10th Avenue, Vancouver, British Columbia V5Z 4E8; Department of Biomedical Engineering, University of British Columbia, KAIS 5500, 2332 Main Mall, Vancouver, British Columbia V6T 1Z4

Scanning speed and coupling efficiency of excitation light to optic fibres are two major technical challenges that limit the potential of fluorescence excitation-emission matrix (EEM) spectrometer for on-line applications and in vivo studies. In this paper, a novel EEM system, utilizing a supercontinuum white light source and acousto-optic tunable filters (AOTFs), was introduced and evaluated. The supercontinuum white light, generated by pumping a nonlinear photonic crystal fiber with an 800 nm femtosecond laser, was efficiently coupled into a bifurcated optic fiber bundle. High speed EEM spectral scanning was achieved using AOTFs both for selecting excitation wavelength and scanning emission spectra.more » Using calibration lamps (neon and mercury argon), wavelength deviations were determined to vary from 0.18 nm to −0.70 nm within the spectral range of 500–850 nm. Spectral bandwidth for filtered excitation light broadened by twofold compared to that measured with monochromatic light between 650 nm and 750 nm. The EEM spectra for methanol solutions of laser dyes were successfully acquired with this rapid fluorometer using an integration time of 5 s.« less

Tissue-based standoff biosensors for detecting chemical warfare agents

DOEpatents

Greenbaum, Elias; Sanders, Charlene A.

2003-11-18

A tissue-based, deployable, standoff air quality sensor for detecting the presence of at least one chemical or biological warfare agent, includes: a cell containing entrapped photosynthetic tissue, the cell adapted for analyzing photosynthetic activity of the entrapped photosynthetic tissue; means for introducing an air sample into the cell and contacting the air sample with the entrapped photosynthetic tissue; a fluorometer in operable relationship with the cell for measuring photosynthetic activity of the entrapped photosynthetic tissue; and transmitting means for transmitting analytical data generated by the fluorometer relating to the presence of at least one chemical or biological warfare agent in the air sample, the sensor adapted for deployment into a selected area.

The Fraunhofer line discriminator: An airborne fluorometer

NASA Technical Reports Server (NTRS)

Stoertz, G. E.

1969-01-01

An experimental Fraunhofer Line Discriminator (FLD) can differentiate and measure solar-stimulated luminescence when viewed against a background of reflected light. Key elements are two extremely sensitive photomultipliers, two glass-spaced Fabry-Perot filters having a bandwidth less than 1 A, and an analog computer. As in conventional fluorometers, concentration of a fluorescent substance is measured by comparison with standards. Quantitative use is probably accurate only at low altitudes but detection of luminescent substances should be possible from any altitude. Applications of the present FLD include remote sensing of fluorescent dyes used in studies of current dynamics. The basic technique is applicable to detection of oil spills, monitoring of pollutants, and sensing over land areas.

Experimental design and quality assurance: in situ fluorescence instrumentation

USGS Publications Warehouse

Conmy, Robyn N.; Del Castillo, Carlos E.; Downing, Bryan D.; Chen, Robert F.

2014-01-01

Both instrument design and capabilities of fluorescence spectroscopy have greatly advanced over the last several decades. Advancements include solid-state excitation sources, integration of fiber optic technology, highly sensitive multichannel detectors, rapid-scan monochromators, sensitive spectral correction techniques, and improve data manipulation software (Christian et al., 1981, Lochmuller and Saavedra, 1986; Cabniss and Shuman, 1987; Lakowicz, 2006; Hudson et al., 2007). The cumulative effect of these improvements have pushed the limits and expanded the application of fluorescence techniques to numerous scientific research fields. One of the more powerful advancements is the ability to obtain in situ fluorescence measurements of natural waters (Moore, 1994). The development of submersible fluorescence instruments has been made possible by component miniaturization and power reduction including advances in light sources technologies (light-emitting diodes, xenon lamps, ultraviolet [UV] lasers) and the compatible integration of new optical instruments with various sampling platforms (Twardowski et at., 2005 and references therein). The development of robust field sensors skirt the need for cumbersome and or time-consuming filtration techniques, the potential artifacts associated with sample storage, and coarse sampling designs by increasing spatiotemporal resolution (Chen, 1999; Robinson and Glenn, 1999). The ability to obtain rapid, high-quality, highly sensitive measurements over steep gradients has revolutionized investigations of dissolved organic matter (DOM) optical properties, thereby enabling researchers to address novel biogeochemical questions regarding colored or chromophoric DOM (CDOM). This chapter is dedicated to the origin, design, calibration, and use of in situ field fluorometers. It will serve as a review of considerations to be accounted for during the operation of fluorescence field sensors and call attention to areas of concern when making this type of measurement. Attention is also given to ways in which in-water fluorescence measurements have revolutionized biogeochemical studies of CDOM and how those measurements can be used in conjunction with remotely sense satellite data to understand better the biogeochemistry of DOM in aquatic environments.

The compositional change of Fluorescent Dissolved Organic Matter across Fram Strait assessed with use of a multi channel in situ fluorometer.

NASA Astrophysics Data System (ADS)

Raczkowska, A.; Kowalczuk, P.; Sagan, S.; Zabłocka, M.; Pavlov, A. K.; Granskog, M. A.; Stedmon, C. A.

2016-02-01

Observations of Colored Dissolved Organic Matter absorption (CDOM) and fluorescence (FDOM) from water samples and an in situ fluorometer and of Inherent Optical Properties (IOP; light absorption and scattering) were carried out along a section across Fram Strait at 79°N. A 3 channel Wetlabs Wetstar fluorometer was deployed, with channels for humic- and protein-like DOM and used to assess distribution of different FDOM fractions. A relationship between fluorescence intensity of the protein-like fraction of FDOM and chlorophyll a fluorescence was found and indicated the importance of phytoplankton biomass in West Spitsbergen Current waters as a significant source of protein-like FDOM. East Greenland Current waters has low concentration of chlorophyll a, and were characterized by high humic-like FDOM fluorescence. An empirical relationship between humic-like FDOM fluorescence intensity and CDOM absorption was derived and confirms the dominance of terrigenous like CDOM on the composition of DOM in the East Greenland Current. These high resolution profile data offer a simple approach to fractionate the contribution of these two DOM source to DOM across the Fram Strait and may help refine estimates of DOC fluxes in and out of the Arctic through this region.

Permeabilized Rat Cardiomyocyte Response Demonstrates Intracellular Origin of Diffusion Obstacles

PubMed Central

Jepihhina, Natalja; Beraud, Nathalie; Sepp, Mervi; Birkedal, Rikke; Vendelin, Marko

2011-01-01

Intracellular diffusion restrictions for ADP and other molecules have been predicted earlier based on experiments on permeabilized fibers or cardiomyocytes. However, it is possible that the effective diffusion distance is larger than the cell dimensions due to clumping of cells and incomplete separation of cells in fiber preparations. The aim of this work was to check whether diffusion restrictions exist inside rat cardiomyocytes or are caused by large effective diffusion distance. For that, we determined the response of oxidative phosphorylation (OxPhos) to exogenous ADP and ATP stimulation in permeabilized rat cardiomyocytes using fluorescence microscopy. The state of OxPhos was monitored via NADH and flavoprotein autofluorescence. By varying the ADP or ATP concentration in flow chamber, we determined that OxPhos has a low affinity in cardiomyocytes. The experiments were repeated in a fluorometer on cardiomyocyte suspensions leading to similar autofluorescence changes induced by ADP as recorded under the microscope. ATP stimulated OxPhos more in a fluorometer than under the microscope, which was attributed to accumulation of ADP in fluorometer chamber. By calculating the flow profile around the cell in the microscope chamber and comparing model solutions to measured data, we demonstrate that intracellular structures impose significant diffusion obstacles in rat cardiomyocytes. PMID:22067148

Evidence for the Maintenance of Slowly Varying Equatorial Currents by Intraseasonal Variability

NASA Astrophysics Data System (ADS)

Greatbatch, Richard J.; Claus, Martin; Brandt, Peter; Matthießen, Jan-Dirk; Tuchen, Franz Philip; Ascani, François; Dengler, Marcus; Toole, John; Roth, Christina; Farrar, J. Thomas

2018-02-01

Recent evidence from mooring data in the equatorial Atlantic reveals that semiannual and longer time scale ocean current variability is close to being resonant with equatorial basin modes. Here we show that intraseasonal variability, with time scales of tens of days, provides the energy to maintain these resonant basin modes against dissipation. The mechanism is analogous to that by which storm systems in the atmosphere act to maintain the atmospheric jet stream. We demonstrate the mechanism using an idealized model setup that exhibits equatorial deep jets. The results are supported by direct analysis of available mooring data from the equatorial Atlantic Ocean covering a depth range of several thousand meters. The analysis of the mooring data suggests that the same mechanism also helps maintain the seasonal variability.

Real-time seismic data from the coastal ocean

USGS Publications Warehouse

Frye, D.; ten Brink, Uri S.; Paul, W.; Peal, K.; Von Der Heydt, K.

2003-01-01

A moored-buoy system for collecting real-time seismic data from the coastal ocean has been developed and will be deployed for its initial field trial in the fall of 2003. The key component in this moored system is an ultra-stretchy mooring hose that provides compliance for waves and currents and protects the electrical conductors connecting an Ocean Bottom Seismometer (OBS) to a surface buoy from the effects of bending and stretching. This hose is able to stretch to more than twice its unstretched length of 30 m without putting excessive strain on the electrical conductors embedded in its wall. In the initial trials of this system, the OBS will be deployed on the bottom in 40 m of water and connected to the mooring hose through a cable on the seafloor. It will transmit continuous data at a rate of about 5,000 bps to a radio link in the surface buoy. A repeater modem located at the Gay Head lighthouse on Martha's Vineyard about 18 km from the mooring site will receive the transmissions and forward the data to our laboratory at WHOI, about 46 km distant. A GPS receiver on the surface buoy will be configured to send accurate and synchronized time to the OBS on the seafloor, which will make it possible to include data from these undersea systems in the existing seismic data network without the need for any preprocessing. Power to operate the RF link and the OBS will be supplied by solar panels and rechargeable batteries on the surface buoy.

A literature review of portable fluorescence-based oil-in-water monitors.

PubMed

Lambert, P

2003-08-15

The results of a literature search on fluorescence-based portable detectors to measure the real-time concentration of oil are reported. For more than two decades, fluorometers have been commonly employed to monitor dispersed oil levels at oil spills on water. The focus of this paper has been to extract specific information from references about how the instruments were used, including set up and calibration procedures, the oil and dispersant measured, the approximate concentration range of the oil in the water column, and how the real-time data compared to traditional laboratory techniques.

A comparison of the impact of 'seagrass-friendly' boat mooring systems on Posidonia australis.

PubMed

Demers, Marie-Claire A; Davis, Andrew R; Knott, Nathan A

2013-02-01

Permanent boat moorings have contributed to the decline of seagrasses worldwide, prompting the development of 'seagrass-friendly' moorings. We contrasted seagrass cover and density (predominantly Posidonia australis) in the vicinity of three mooring types and nearby reference areas lacking moorings in Jervis Bay, Australia. We examined two types of 'seagrass-friendly' mooring and a conventional 'swing' mooring. 'Swing' moorings produced significant seagrass scour, denuding patches of ~9 m radius. Seagrass-friendly 'cyclone' moorings produced extensive denuded patches (average radius of ~18 m). Seagrass-friendly 'screw' moorings, conversely, had similar seagrass cover to nearby reference areas. Our findings reinforce previous work highlighting the negative effects of 'swing' and 'cyclone' moorings. In contrast, the previously unstudied 'screw' moorings were highly effective. We conclude that regular maintenance of moorings and the monitoring of surrounding seagrass are required to ensure that 'seagrass-friendly' moorings are operating effectively. This is important, as following damage Posidonia will take many decades to recover. Copyright © 2012 Elsevier Ltd. All rights reserved.

Extraordinary flood response of a small urban watershed to short-duration convective rainfall

USGS Publications Warehouse

Smith, J.A.; Miller, A.J.; Baeck, M.L.; Nelson, P.A.; Fisher, G.T.; Meierdiercks, K.L.

2005-01-01

The 9.1 km2 Moores Run watershed in Baltimore, Maryland, experiences floods with unit discharge peaks exceeding 1 m3 s-1 km-2 12 times yr-1, on average. Few, if any, drainage basins in the continental United States have a higher frequency. A thunderstorm system on 13 June 2003 produced the record flood peak (13.2 m3 s-1 km-2) during the 6-yr stream gauging record of Moores Run. In this paper, the hydrometeorology, hydrology, and hydraulics of extreme floods in Moores Run are examined through analyses of the 13 June 2003 storm and flood, as well as other major storm and flood events during the 2000-03 time period. The 13 June 2003 flood, like most floods in Moores Run, was produced by an organized system of thunderstorms. Analyses of the 13 June 2003 storm, which are based on volume scan reflectivity observations from the Sterling, Virginia, WSR-88D radar, are used to characterize the spatial and temporal variability of flash flood producing rainfall. Hydrology of flood response in Moores Run is characterized by highly efficient concentration of runoff through the storm drain network and relatively low runoff ratios. A detailed survey of high-water marks for the 13 June 2003 flood is used, in combination with analyses based on a 2D, depth-averaged open channel flow model (TELEMAC 2D) to examine hydraulics of the 13 June 2003 flood. Hydraulic analyses are used to examine peak discharge estimates for the 13 June flood peak, propagation of flood waves in the Moores Run channel, and 2D flow features associated with channel and floodplain geometry. ?? 2005 American Meteorological Society.

Phytoplankton production in the Sargasso Sea as determined using optical mooring data

NASA Technical Reports Server (NTRS)

Waters, K. J.; Smith, R. C.; Marra, J.

1994-01-01

Optical measurements from an untended mooring provide high-frequency observations of in-water optical properties and permit the estimation of important biological parameters continuously as a function of time. A 9-month time series, composed of three separate deployments, of optical data from the BIOWATT 1987 deep-sea mooring located in the oligotrophic waters of the Sargasso Sea at 34 deg N, 70 deg W are presented. These data have been tested using several bio-optical models for the purpose of providing a continuous estimate of phytoplankton productivity. The data are discussed in the context of contemporaneous shipboard observations and for future ocean color satellite observations. We present a continuous estimation of phytoplankton productivity for the 9-month time series. Results from the first 70-day deployment are emphasized to demonstrate the utility of optical observations as proxy measures of biological parameters, to present preliminary analysis, and to compare our bio-optical observations with concurrent physical observations. The bio-optical features show variation in response to physical forcings including diel variations of incident solar irradiance, episodic changes corresponding to wind forcing, variability caused by advective mesoscale eddy events in the vicinity of the mooring, and seasonal variability corresponding to changes in solar radiation, shoaling of the mixed layer depth, and succession of phytoplankton populations.

Computer controlled fluorometer device and method of operating same

DOEpatents

Kolber, Z.; Falkowski, P.

1990-07-17

A computer controlled fluorometer device and method of operating same, said device being made to include a pump flash source and a probe flash source and one or more sample chambers in combination with a light condenser lens system and associated filters and reflectors and collimators, as well as signal conditioning and monitoring means and a programmable computer means and a software programmable source of background irradiance that is operable according to the method of the invention to rapidly, efficiently and accurately measure photosynthetic activity by precisely monitoring and recording changes in fluorescence yield produced by a controlled series of predetermined cycles of probe and pump flashes from the respective probe and pump sources that are controlled by the computer means. 13 figs.

Computer controlled fluorometer device and method of operating same

DOEpatents

Kolber, Zbigniew; Falkowski, Paul

1990-01-01

A computer controlled fluorometer device and method of operating same, said device being made to include a pump flash source and a probe flash source and one or more sample chambers in combination with a light condenser lens system and associated filters and reflectors and collimators, as well as signal conditioning and monitoring means and a programmable computer means and a software programmable source of background irradiance that is operable according to the method of the invention to rapidly, efficiently and accurately measure photosynthetic activity by precisely monitoring and recording changes in fluorescence yield produced by a controlled series of predetermined cycles of probe and pump flashes from the respective probe and pump sources that are controlled by the computer means.

High Resolution Time Series Observations of Bio-Optical and Physical Variability in the Arabian Sea

DTIC Science & Technology

1998-09-30

1995-October 20, 1995). Multi-variable moored systems ( MVMS ) were deployed by our group at 35 and 80m. The MVMS utilizes a VMCM to measure currents...similar to that of the UCSB MVMSs. WORK COMPLETED Our MVMS interdisciplinary systems with sampling intervals of a few minutes were placed on a mooring

PREFACE: E-MRS 2012 Spring Meeting, Symposium M: More than Moore: Novel materials approaches for functionalized Silicon based Microelectronics

NASA Astrophysics Data System (ADS)

Wenger, Christian; Fompeyrine, Jean; Vallée, Christophe; Locquet, Jean-Pierre

2012-12-01

More than Moore explores a new area of Silicon based microelectronics, which reaches beyond the boundaries of conventional semiconductor applications. Creating new functionality to semiconductor circuits, More than Moore focuses on motivating new technological possibilities. In the past decades, the main stream of microelectronics progresses was mainly powered by Moore's law, with two focused development arenas, namely, IC miniaturization down to nano scale, and SoC based system integration. While the microelectronics community continues to invent new solutions around the world to keep Moore's law alive, there is increasing momentum for the development of 'More than Moore' technologies which are based on silicon technologies but do not simply scale with Moore's law. Typical examples are RF, Power/HV, Passives, Sensor/Actuator/MEMS or Bio-chips. The More than Moore strategy is driven by the increasing social needs for high level heterogeneous system integration including non-digital functions, the necessity to speed up innovative product creation and to broaden the product portfolio of wafer fabs, and the limiting cost and time factors of advanced SoC development. It is believed that More than Moore will add value to society on top of and beyond advanced CMOS with fast increasing marketing potentials. Important key challenges for the realization of the 'More than Moore' strategy are: perspective materials for future THz devices materials systems for embedded sensors and actuators perspective materials for epitaxial approaches material systems for embedded innovative memory technologies development of new materials with customized characteristics The Hot topics covered by the symposium M (More than Moore: Novel materials approaches for functionalized Silicon based Microelectronics) at E-MRS 2012 Spring Meeting, 14-18 May 2012 have been: development of functional ceramics thin films New dielectric materials for advanced microelectronics bio- and CMOS compatible material systems piezoelectric films and nanostructures Atomic Layer Deposition (ALD) of oxides and nitrides characterization and metrology of very thin oxide layers We would like to take this opportunity to thank the Scientific Committee and Local Committee for bringing together a coherent and high quality Symposium at E-MRS 2012 Spring Meeting. Christian Wenger, Jean Fompeyrine, Christophe Vallée and Jean-Pierre Locquet Organizing Committee of Symposium M September 2012

Intraseasonal variability and tides in Makassar Strait

NASA Astrophysics Data System (ADS)

Susanto, R. Dwi; Gordon, Arnold L.; Sprintall, Janet; Herunadi, Bambang

2000-05-01

Intraseasonal variability and tides along the Makassar Strait, the major route of Indonesian throughflow, are investigated using spectral and time-frequency analyses which are applied to sea level, wind and mooring data. Semidiurnal and diurnal tides are dominant features, with higher (lower) semidiurnal (diurnal) energy in the north compared to the south. Sea levels and mooring data display intraseasonal variability which are probably a response to remotely forced Kelvin waves from the Indian Ocean through Lombok Strait and to Rossby waves from the Pacific Ocean. Sea levels in Tarakan and Balikpapan and Makassar mooring velocities reveal intraseasonal features with periods of 48-62 days associated with Rossby waves from the Sulawesi Sea. Kelvin wave features with periods of 67-100 days are seen in Bali (Lombok Strait), at the mooring sites and in Balikpapan, however, they are not seen in Tarakan, which implies that these waves diminish after passing through the Makassar Strait.

Fleet Mooring Underwater Inspection Report La Maddalena, Italy.

DTIC Science & Technology

1981-12-01

Peg Top mooring buoys at the bow at the NATO Naval Facility, St. Stefano , Sardinia, Italy. The ship using the mooring is moored at the stern to the...LAT: NSO LA MADDALENA NORTH RISER/MED MOOR LON:SANTO STEFANO ,ISardinia, Italy ii DATE DIVERS U 1WATER DEPTH SUPERVISOR INITIALS 5. INSPECTION 18-25 Sep...0) 0 蟙 W. .-. MOORING INSPECTION REPORT Page 3 of 3 1. FACILITY 2. MOORING NO. 13. TYPE/CLASSMOORING 4. LAT.RISER/MD MOOR SANTO STEFANO , NSO LA

The development of the Garden Banks block 388 FPF mooring system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dove, P.G.S.; Librino, F.; Scovell, D.C.

1995-12-01

This paper discusses work conducted during the design, procurement and installation of Enserch Exploration, Inc.`s Garden Banks 388 FPF mooring system. The design began with the execution of a trade-off study evaluating and comparing previously installed floating production moorings in the Gulf of Mexico, coupled with evaluation of new concepts and emphasis on cost effective solutions. The design effort involved dynamic analysis and wind tunnel and model tank testing, all in accordance with the newly completed API document RP 2FP1. Inspection of various components from the Placid GC-29 FPS moorings (installed in 1987 and recovered in 1990) determined that sectionsmore » of chain, jacketed spiral strand wire rope, submersible buoys and connectors could be reused with suitable refurbishment. The excellent condition of the rig`s onboard winching system also resulted in the reuse of the windlasses, with specified upgrades. Because a sufficient amount of used wire was not available, a bare spiral strand wire rope construction was adopted, including zinc anodes in the new sections, rather than jacketed strand. The lack of cost effective installation vessels in the Gulf of Mexico at the time of the installation bid posed challenges to Enserch. However, an innovative preset mooring installation scheme involving Heeremac`s SSCV Balder on its own moorings was adopted. Since the vessel was already in the Gulf of Mexico on contract for other projects, a cost effective contract was negotiated. The results of this effort led to considerable cost savings for Enserch, compared to conventional FPF mooring systems previously installed in the Gulf of Mexico.« less

Parental Involvement in the Lives of College Students: Impact on Student Independence, Self-Direction, and Critical Thinking

ERIC Educational Resources Information Center

Spence, Patrick

2012-01-01

Recent studies have noted the increasing communication between parents and students while students are in college (College Parent, 2007; Hofer & Moore, 2010). The most recent study noted that the interaction between parent and student during the last year of college averages over 13 times a week (Hofer & Moore, 2010). While many articles…

Development and Sensing Properties Study of Underwater Assembled Water Depth-Inclination Sensors for a Multi-Component Mooring System, Using a Self-Contained Technique

PubMed Central

Wu, Wenhua; Feng, Jiaguo; Xie, Bin; Tang, Da; Yue, Qianjin; Xie, Ribin

2016-01-01

Prototype monitoring techniques play an important role in the safety guarantee of mooring systems in marine engineering. In general, the complexities of harsh ocean environmental conditions bring difficulties to the traditional monitoring methods of application, implementation and maintenance. Large amounts of existing mooring systems still lack valid monitoring strategies. In this paper, an underwater monitoring method which may be used to achieve the mechanical responses of a multi-point catenary mooring system, is present. A novel self-contained assembled water depth-inclination (D-I) sensor is designed and manufactured. Several advanced technologies, such as standalone, low power consumption and synchronism, are considered to satisfy the long-term implementation requirements with low cost during the design process. The design scheme of the water resistance barrel and installation clamp, which satisfies the diver installation, are also provided in the paper. An on-site test has previously been carried out on a production semisubmersible platform in the South China Sea. The prototype data analyses, including the D-I value in the time domain (including the data recorded during the mooring retraction and release process) and spectral characteristics, are presented to reveal the accuracy, feasibility and stability of the sensor in terms of fitting for the prototype monitoring of catenary mooring systems, especially for in-service aging platforms. PMID:27854357

Impact analysis of air gap motion with respect to parameters of mooring system for floating platform

NASA Astrophysics Data System (ADS)

Shen, Zhong-xiang; Huo, Fa-li; Nie, Yan; Liu, Yin-dong

2017-04-01

In this paper, the impact analysis of air gap concerning the parameters of mooring system for the semi-submersible platform is conducted. It is challenging to simulate the wave, current and wind loads of a platform based on a model test simultaneously. Furthermore, the dynamic equivalence between the truncated and full-depth mooring system is still a tuff work. However, the wind and current loads can be tested accurately in wind tunnel model. Furthermore, the wave can be simulated accurately in wave tank test. The full-scale mooring system and the all environment loads can be simulated accurately by using the numerical model based on the model tests simultaneously. In this paper, the air gap response of a floating platform is calculated based on the results of tunnel test and wave tank. Meanwhile, full-scale mooring system, the wind, wave and current load can be considered simultaneously. In addition, a numerical model of the platform is tuned and validated by ANSYS AQWA according to the model test results. With the support of the tuned numerical model, seventeen simulation cases about the presented platform are considered to study the wave, wind, and current loads simultaneously. Then, the impact analysis studies of air gap motion regarding the length, elasticity, and type of the mooring line are performed in the time domain under the beam wave, head wave, and oblique wave conditions.

Measuring indigenous photosynthetic organisms to detect chemical warefare agents in water

DOEpatents

Greenbaum, Elias; Sanders, Charlene A.

2005-11-15

A method of testing water to detect the presence of a chemical or biological warfare agent is disclosed. The method is carried out by establishing control data by providing control water containing indigenous organisms but substantially free of a chemical and a biological warfare agent. Then measuring photosynthetic activity of the control water with a fluorometer to obtain control data to compare with test data to detect the presence of the chemical or agent. The test data is gathered by providing test water comprising the same indigenous organisms as contained in the control water. Further, the test water is suspected of containing the chemical or agent to be tested for. Photosynthetic activity is also measured by fluorescence induction in the test water using a fluorometer.

A fiber optic, ultraviolet light-emitting diode-based, two wavelength fluorometer for monitoring reactive adsorption

DOE Office of Scientific and Technical Information (OSTI.GOV)

Granz, Christopher D.; Whitten, James E., E-mail: James-Whitten@uml.edu; Schindler, Bryan J.

Construction and use of an ultraviolet light-emitting diode-based fluorometer for measuring photoluminescence (PL) from powder samples with a fiber optic probe is described. Fluorescence at two wavelengths is detected by miniature photomultiplier tubes, each equipped with a different band pass filter, whose outputs are analyzed by a microprocessor. Photoluminescent metal oxides and hydroxides, and other semiconducting nanoparticles, often undergo changes in their emission spectra upon exposure to reactive gases, and the ratio of the PL intensities at two wavelengths is diagnostic of adsorption. Use of this instrument for reactive gas sensing and gas filtration applications is illustrated by measuring changesmore » in the PL ratio for zirconium hydroxide and zinc oxide particles upon exposure to air containing low concentrations of sulfur dioxide.« less

Natural variability of pCO2 and pH in the Atlantic and Pacific coastal margins of the U.S

NASA Astrophysics Data System (ADS)

Sutton, A. J.; Sabine, C. L.; Feely, R. A.; Newton, J.; Salisbury, J.; Vandemark, D. C.; Musielewicz, S. B.; Maenner-Jones, S.; Bott, R.; Lawrence-Slavas, N.

2011-12-01

The discovery that seawater chemistry is changing as a result of carbon dioxide (CO2) emissions, referred to as "ocean acidification", has prompted a large effort to understand how this changing chemistry will impact marine life. Changes in carbon chemistry have been documented in the open ocean; however, in dynamic coastal systems where many marine species live, ocean acidification and the natural biogeochemical variability that organisms are currently exposed to are poorly quantified. In 2010 we began equipping coastal moorings currently measuring pCO2 with pH and other biogeochemical sensors to measure ocean acidification parameters at 3 hour intervals in the surface water. Here we present the magnitude and diurnal to seasonal variability of pCO2 and pH during the first year of observations at 2 sites in the Atlantic and Pacific coastal margins of the U.S.: the Gulf of Maine and outer coast of Washington state. Both the magnitude and range of pCO2 and pH values were much greater at the coastal moorings compared to the open ocean mooring at Ocean Station Papa in the North Pacific and also varied between the two coastal mooring sites. We observed maximum pCO2 values in coastal waters exceeding predicted values for the open ocean at 2x pre-industrial CO2 levels. The range of pCO2 and pH values during this time series was approximately 4 times the range observed at open ocean mooring Papa (2007-2011 time series). In many cases, large variance was observed at short time scales, with values fluctuating more than 200 μatm pCO2 and 0.2 pH between 3-hour cycles. These types of observations are critical for understanding how ocean acidification will manifest in naturally dynamic coastal systems and for informing the experimental design of species response studies that aim to mimic carbon chemistry experienced by coastal marine organisms.

46 CFR 184.300 - Ground tackle and mooring lines.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Ground tackle and mooring lines. 184.300 Section 184.300... Ground tackle and mooring lines. A vessel must be fitted with ground tackle and mooring lines necessary for the vessel to be safely anchored or moored. The ground tackle and mooring lines provided must be...

46 CFR 184.300 - Ground tackle and mooring lines.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Ground tackle and mooring lines. 184.300 Section 184.300... Ground tackle and mooring lines. A vessel must be fitted with ground tackle and mooring lines necessary for the vessel to be safely anchored or moored. The ground tackle and mooring lines provided must be...

Admiralty Inlet Advanced Turbulence Measurements: May 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kilcher, Levi

This data is from measurements at Admiralty Head, in Admiralty Inlet (Puget Sound) in May of 2015. The measurements were made using Inertial Motion Unit (IMU) equipped ADVs mounted on a 'StableMoor' (Manufacturer: DeepWater Buoyancy) buoy and a Tidal Turbulence Mooring (TTM). These platforms position ADV heads above the seafloor to make mid-depth turbulence measurements. The inertial measurements from the IMU allows for removal of mooring motion in post processing. The mooring and buoy motion has been removed from the stream-wise and vertical velocity signals (u, w). The lateral (v) velocity has some 'persistent motion contamination' due to mooring sway.more » The TTM was deployed with one ADV, it's position was: 48 09.145', -122 41.209' The StableMoor was deployed twice, the first time it was deployed in 'wing-mode' with two ADVs ('Port' and 'Star') at: 48 09.166', -122 41.173' The second StableMoor deployment was in 'Nose' mode with one ADV at: 48 09.166', -122 41.174' Units ----- - Velocity data (_u, urot, uacc) is in m/s. - Acceleration (Accel) data is in m/s^2. - Angular rate (AngRt) data is in rad/s. - The components of all vectors are in 'ENU' orientation. That is, the first index is True East, the second is True North, and the third is Up (vertical). - All other quantities are in the units defined in the Nortek Manual. Motion correction and rotation into the ENU earth reference frame was performed using the Python-based open source DOLfYN library (http://lkilcher.github.io/dolfyn/). Details on motion correction can be found there. Additional details on TTM measurements at this site can be found in the included Marine Energy Technology Symposium paper.« less

Trapping of Momentum due to Low Salinity Water in the north Bay of Bengal

NASA Astrophysics Data System (ADS)

Chaudhuri, D.; Tandon, A.; Farrar, T.; Weller, R. A.; Venkatesan, R.; S, S.; MacKinnon, J. A.; D'Asaro, E. A.; Sengupta, D.

2016-02-01

We study the relation between near-surface ocean stratification and upper ocean currents (momentum) during the diurnal cycle and subseasonal "active-break cycle" of the summer monsoon in the north Bay of Bengal. We use time series of hourly observations from NIOT moorings BD08, BD09 and an INCOIS mooring near 18 N, 89 E in 2013, and data collected during two research cruises of ORV Sagar Nidhi in August-September 2014 and 2015. Our analyses are based on upper ocean profiles of temperature, salinity and density (from moorings and a shipborne underway conductivity-temperature-depth profiler), velocity (Acoustic Doppler Current Profiler), and surface forcing (meterology sensors on moored buoy and ship). Monsoon breaks are characterized by low rainfall, low wind speed (0-5 m/s) and high incident shortwave radiation, whereas active phases are marked by intense rainfall, high wind speed (8-16 m/s) and low incident sunlight. Our main findings are: (i) Net surface heat flux is positive (ocean gains heat) during break spells, and sea surface temperature (SST) rises by upto 1.5 C in 1-2 weeks. (ii) During breaks, day-night SST difference can reach 1.5C; mixed layer depth (MLD) shoals to 5m during day time, and deepens to 15-20 m by late night/early morning. (iii) During active spells, SST cools on subseasonal scales; MLD is deep (exceeding 20 m), and diurnal re-stratification is weak or absent. (iv) Once very low-salinity water (<30 psu) from rivers arrives at the moorings in late August, MLD remains shallow, and is insensitive to subseasonal changes in surface forcing. (v) Moored data and high-resolution observations from the summer 2014 and 2015 cruises reveal trapping of momentum from winds in a relatively thin surface layer when surface salinity is low and the shallow stratification is strong. Results of ingoing analyses will be presented at the meeting.

Long Term Upper Ocean Study (LOTUS). A Summary of the Historical Data and Engineering Test Data.

DTIC Science & Technology

1982-12-01

the temperature measurements is .1% of the temperature range or .0250C. The recording units were held in stainless steel brackets with strength... diagram of mooring No. 693. 105 A2. Mooring diagram of mooring No. 694. 106 A3. Mooring diagram of mooring No. 733. 107 Acknowledgements The engineering...33059.8’N, 7000.1’W. Mooring diagrams appear in figures A-1 and A-2. The surface mooring, designated LOTUS-i, had a buoy with an Aanderaa meteorological

COMPETING IN THE SOCIAL BATTLESPACE: INFLUENCING THE THREE DOMAINS

DTIC Science & Technology

2017-06-01

Legacy (Knopf Doubleday Publishing Group, 2009), 33. 39 Norman Polmar and Kenneth J. Moore, Cold War Submarines: The Design and Construction of U.S...and shot Brown six times in the back, killing him. Michael Brown would lay four hours on the pavement as additional police officers and...Cornell University Press. Polmar, Norman, and Kenneth J. Moore. Cold War Submarines: The Design and Construction of U.S. and Soviet Submarines

Moore Than Meets the Eye: How a Librarian with Little Experience with Kids Became One of the Most Powerful People in Children's Publishing.

ERIC Educational Resources Information Center

Cummins, Julie

1999-01-01

Discusses the professional accomplishments of Anne Carroll Moore, the librarian who first introduced children's services to the New York Public Library and who pioneered modern children's book reviewing and created one of the first and most influential children's booklists of her time. She arrived at the Library in 1906 and retired in 1941 at the…

Verification and Validation of the New Dynamic Mooring Modules Available in FAST v8: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wendt, Fabian; Robertson, Amy; Jonkman, Jason

2016-08-01

The open-source aero-hydro-servo-elastic wind turbine simulation software, FAST v8, was recently coupled to two newly developed mooring dynamics modules: MoorDyn and FEAMooring. MoorDyn is a lumped-mass-based mooring dynamics module developed by the University of Maine, and FEAMooring is a finite-element-based mooring dynamics module developed by Texas A&M University. This paper summarizes the work performed to verify and validate these modules against other mooring models and measured test data to assess their reliability and accuracy. The quality of the fairlead load predictions by the open-source mooring modules MoorDyn and FEAMooring appear to be largely equivalent to what is predicted by themore » commercial tool OrcaFlex. Both mooring dynamic model predictions agree well with the experimental data, considering the given limitations in the accuracy of the platform hydrodynamic load calculation and the quality of the measurement data.« less

Verification and Validation of the New Dynamic Mooring Modules Available in FAST v8

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wendt, Fabian F.; Andersen, Morten T.; Robertson, Amy N.

2016-07-01

The open-source aero-hydro-servo-elastic wind turbine simulation software, FAST v8, was recently coupled to two newly developed mooring dynamics modules: MoorDyn and FEAMooring. MoorDyn is a lumped-mass-based mooring dynamics module developed by the University of Maine, and FEAMooring is a finite-element-based mooring dynamics module developed by Texas A&M University. This paper summarizes the work performed to verify and validate these modules against other mooring models and measured test data to assess their reliability and accuracy. The quality of the fairlead load predictions by the open-source mooring modules MoorDyn and FEAMooring appear to be largely equivalent to what is predicted by themore » commercial tool OrcaFlex. Both mooring dynamic model predictions agree well with the experimental data, considering the given limitations in the accuracy of the platform hydrodynamic load calculation and the quality of the measurement data.« less

Multiplex fluorescent immunoassay device based on magnetic nanoparticles

NASA Astrophysics Data System (ADS)

Godjevargova, T. I.; Ivanov, Y. L.; Dinev, D. D.

2017-02-01

Immunofluorescent analyzer based compact disc for simultaneous detection of 3 antibiotics in the same milk sample is consisting of two parts: CD-based immunofluorescence kit and optoelectronic fluorometer. Kit consists of 2 parts: Lyophilized immobilized antibodies on supermagnetic nanoparticles in Eppendorf tubes and CD-based microfluidic disk, in which are formed five chamber systems for simultaneous detecting of 5 separate samples. Each system consists of 2 chambers connected by a special micro channel acting as a hydrophobic valve. In the first chamber lyophilised conjugates of 3 antibiotics with accordingly 3 different fluorescent dyes are placed. The second chamber is for detection of fluorescent signal. The optoelectronic fluorometer is comprising of: integrated thermostatic block; mechanical-detecting unit (fluorometer) and block with controlling and visualizing electronics.The disc gets into a second block of the analyzer, where centrifugation is performed and also reporting of the fluorescent signals. This unit comprises a rotor on which the disc is fixed, permanent electromagnet in the form of a ring inserted under the disc and module of 3 LED diodes with emission filters for the relevant wavelengths corresponding to the used fluorescent dyes and 1 integrated photodiode, in front of which is mounted filter with 3 spectral peaks.The signal from the photodiode is detected by the electronic unit which is sensitive "lock-in" amplifier, the engine rotor management, control of thermostatic device and management of periphery of the analyzer, consisting of display and communications with computer.

Advanced mooring method for installation of Enserch Garden Banks 388 FPF mooring legs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honig, H.J.; Koolwijk, W.; Scovell, D.C.

1995-12-31

In the fall of 1994 HeereMac v.o.f installed the 12 mooring legs for Enserch Exploration`s Floating Production Facility in Garden Banks Block 388 in the Gulf of Mexico with the SSCV Balder. The installation of the catenary mooring system, each leg comprising several varying sections of spiral strand wire and chain, required sufficient handling and maneuverability power of the vessel, while enough holding capacity and stiffness of the system had to be provided. The most important aspects of the actual installation of the mooring legs are explained, for example, the use of a purpose built tipping winch. The method selectedmore » by HeereMac for station-keeping the Balder was to use a minimum number of anchor lines in combination with a tug, in order to maintain position and at the same time have an easy and controlled method of maneuvering to a new position. The method of station-keeping the SSCV in this way is part of a development towards full position control with a spread of tugs. In this paper the station-keeping system is described and the offshore experiences with the system are discussed. Some future developments with respect to tug-assisted station-keeping systems are highlighted.« less

Two mooring dolphin concept for exposed tanker terminals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khanna, J.; Birt, C.

1978-02-01

The conventional design of a tanker terminal provides for two or more mooring dolphins on each side of the breasting dolphins. Head and stern lines are attached to the outer mooring dolphins and breast lines to the inner mooring dolphins. In exposed locations, the expense of construction may be significantly reduced if a way can be found to reduce the number of mooring dolphins required for the safe mooring of ships at a fixed berth. A study based on plans for a proposed terminal for tankers from 25,000 to 100,000 dwt in the Bay of Fundy in eastern Canada considersmore » the possibility of reducing the total number of mooring dolphins from four to two. Results of a static analysis of mooring loads due to wind and current and a hydraulic model test for mooring loads due to waves are presented.« less

Estimation of chromophoric dissolved organic matter (CDOM) and photosynthetic activity of estuarine phytoplankton using a multiple-fixed-wavelength spectral fluorometer.

PubMed

Goldman, Emily A; Smith, Erik M; Richardson, Tammi L

2013-03-15

The utility of a multiple-fixed-wavelength spectral fluorometer, the Algae Online Analyser (AOA), as a means of quantifying chromophoric dissolved organic matter (CDOM) and phytoplankton photosynthetic activity was tested using algal cultures and natural communities from North Inlet estuary, South Carolina. Comparisons of AOA measurements of CDOM to those by spectrophotometry showed a significant linear relationship, but increasing amounts of background CDOM resulted in progressively higher over-estimates of chromophyte contributions to a simulated mixed algal community. Estimates of photosynthetic activity by the AOA at low irradiance (≈ 80 μmol quanta m(-2) s(-1)) agreed well with analogous values from the literature for the chlorophyte, Dunaliella tertiolecta, but were substantially lower than previous measurements of the maximum quantum efficiency of photosystem II (F(v)/F(m)) in Thalassiosira weissflogii (a diatom) and Rhodomonas salina (a cryptophyte). When cells were exposed to high irradiance (1500 μmol quanta m(-2) s(-1)), declines in photosynthetic activity with time measured by the AOA mirrored estimates of cellular fluorescence capacity using the herbicide 3'-(3, 4-dichlorophenyl)-1',1'-dimethyl urea (DCMU). The AOA shows promise as a tool for the continuous monitoring of phytoplankton community composition, CDOM, and the group-specific photosynthetic activity of aquatic ecosystems. Copyright © 2012 Elsevier Ltd. All rights reserved.

A Total Lightning Perspective of the 20 May 2013 Moore, Oklahoma Supercell

NASA Technical Reports Server (NTRS)

Stano, Geoffrey T.; Schultz, Christopher J.; Carey, Lawrence D.; MacGorman, Don R.; Calhoun, Kristin M.

2014-01-01

In the early afternoon of 20 May 2013, a storm initiated to the west-southwest of Newcastle, Oklahoma. This storm would rapidly intensify into the parent supercell of the tornado that struck the city of Moore, Oklahoma. This article describes what contributions total lightning observations from the Oklahoma Lightning Mapping Array could provide to operational forecasters had these observations been available in real-time. This effort includes a focus on the GOES-R pseudo-geostationary lightning mapper demonstration product as well as the NASA SPoRT / Meteorological Development Laboratory's total lightning tracking tool. These observations and tools identified several contributions. Two distinct lightning jumps at 1908 and 1928 UTC provided a lead time of 19 minutes ahead of severe hail and 26 minutes ahead of the Moore, Oklahoma tornado's touchdown. These observations provide strong situational awareness to forecasters, as the lightning jumps are related to the rapid strengthening of the storm's updraft and mesocyclone and serve as a precursor to the stretching of the storm vortex ahead severe weather.

46 CFR 121.300 - Ground tackle and mooring lines.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Ground tackle and mooring lines. 121.300 Section 121.300... MISCELLANEOUS SYSTEMS AND EQUIPMENT Mooring and Towing Equipment § 121.300 Ground tackle and mooring lines. A vessel must be fitted with ground tackle and mooring lines necessary for the vessel to be safely anchored...

46 CFR 121.300 - Ground tackle and mooring lines.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Ground tackle and mooring lines. 121.300 Section 121.300... MISCELLANEOUS SYSTEMS AND EQUIPMENT Mooring and Towing Equipment § 121.300 Ground tackle and mooring lines. A vessel must be fitted with ground tackle and mooring lines necessary for the vessel to be safely anchored...

Autonomous Ocean Turbulence Measurements From a Moored Upwardly Rising Profiler Based on a Buoyancy-Driven Mechanism

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Xiuyan; Luan, Xin; Daniel Deng, Z.

An autonomous Moored Reciprocating Vertical Profiler (MRVP) has been developed and tested for measuring ocean turbulence. The MRVP is designed to combine the advantages of long-term moored measurements at specified depths with those of short-term ship-supported continuous profiling performed at high vertical resolution. The profiler is programmed to repeat vertical motions autonomously along the mooring cable based on a buoyancy-driven mechanism. A sea trial has been conducted in the South China Sea to evaluate the performance of the profiler. The shear probe data are unreliable when the flow past sensors is not sufficiently greater than an estimate of turbulent velocity.more » For 65% of the dataset, turbulence measurements are of high quality and the magnitude of dissipation rates is up to O(10 -10) W kg -1. To minimize the contamination induced by instrument vibration and improve the estimation of turbulent kinetic energy terms, an advanced cross-spectrum algorithm is implemented to the measured shear data. The corrected spectra agrees well with the empirical Nasmyth spectrum, and dissipation rates had averagely decreased a factor of 2 and 8 times lower than the raw spectra. The autonomous MRVP is proven to be a stable platform, and the novel upward measurement provides a new perspective for measuring long-term time series of turbulence mixing.« less

Cabled-observatory Regional Circulation Moorings on the Endeavour segment of the Juan de Fuca Ridge

NASA Astrophysics Data System (ADS)

Mihaly, S. F.

2011-12-01

In September of 2010, one of four moorings was deployed on the Endeavour node of the NEPTUNE Canada cabled-observatory network. The installation included the laying of a 7km cable from the node to the mooring site in the axial valley about 3km north of the Main Endeavour Vent Field over extraordinary bathymetry. This September, three more cables and secondary junction boxes will be deployed to support the three additional moorings that complete the regional circulation array. The cable-laying is facilitated by the Canadian Scientific Submersible Facility's ROV ROPOS and a remotely operated cable-laying system, whereas the actual deployment of the moorings is a two ship operation. The CCGS John P. Tully lowers the mooring anchor first, while the RV Thomas G. Thompson supports the ROV operations which navigate the mooring to underwater mateable cable end. Precise navigation is needed because there are few areas suitable for placement of the junction boxes. Scientifically, the moorings are designed and located to best constrain the hydrothermally driven circulation within the rift valley, the regional circulation can then be used as a proxy measurement for hydrothermal fluxes. Each mooring carries a current meter/ ctd pair at 4, 50, 125, and 200m, with an upward looking ADCP at 250m. The northern moorings are located between the Hi-Rise and Salty Dawg fields about 700m apart in the ~1km wide rift valley and the southern moorings are located south of the Mothra vent field. Here we present initial results from the four mooring array.

Fluorescence Spectroscopy in a Shoebox

ERIC Educational Resources Information Center

Wahab, M. Farooq

2007-01-01

The construction of a fluorometer and a spectrofluorometer using flashlight or a sunlight excitation source in a shoebox and the eye as a detector is being described. The assembly helps in understanding several fundamental ideas related to the subject very easily.

Ep45_Digital Space

NASA Image and Video Library

2018-04-18

Gary Jordan (Host): Houston, we have a podcast. Welcome to the official podcast of the NASA Johnson Space Center, episode 45, "Digital Space". I'm Gary Jordan, and I'll be your host today. So, in this podcast, we bring in the experts, NASA scientists, engineers, astronauts, sometimes our leaders. We bring them right here on the show to tell you about all the cool stuff that's going on right here at NASA. So, today, we're talking about data and information in space and here at the Johnson Space Center with Annette Moore. She's the Director of our Information Resources Director and the Chief Information Officer here in Houston. And, we had a great discussion about the tech we use for human spaceflight operations, including space station imagery and how it's changed over time. And then, how the Johnson Space Center is handling the multiple petabytes of data. It's actually unbelievable how much data we have. The multiple petabytes of data and information that we use all the time in our everyday lives. So, with no further delay, let's go light speed and jump right ahead to our talk with Ms. Annette Moore. Enjoy. [ Music ] Annette Moore: T minus five seconds and counting. Mark. [ Inaudible Comment ] Annette Moore: Houston, we have a podcast. [ Music ] Host: All right. Annette, thank you so much for coming on the podcast today to talk about this digital space. Annette Moore: Well, I'm pretty excited about this, and I'm glad I had the opportunity to sit down and talk with you. Host: Absolutely. And, it's, I'm particularly excited about it because we're talking about data, that not only we deal with every day, but was we were, we were just chatting just a little bit before this. There's a whole history of data, and we have, you know, we have records of all of the history of our flights that we have to maintain to a certain level, and we are required to maintain in a way that is going to, I guess, we're going to pass forth and make sure that we can retain for years to come. Annette Moore: Absolutely. Yeah. Host: There's a lot of stuff here. Annette Moore: Yeah. Host: And, we're talking about data from, from some of the Legacy programs, too, right? Annette Moore: You bet. Host: We're talking about Apollo, Gemini. Annette Moore: Apollo, Gemini. You bet. Yes, yes. Host: Wow. So, why don't we start, start with that? Why don't we start with some of the data that we're, that we're dealing with? Kind of continuing from the conversation that we were talking about earlier. What is some of the historical data that we have, and how are we keeping it? Annette Moore: So, we have data that dates all the way back to the Apollo program, and that data is kept in various forms of media. So, originally, you might imagine when we first started getting that data, that data was on paper. It was on tape. And, I mean the old fashioned, reel-to-reel tape. And, as we've moved more into the digital age, we're converting that to digital. Of course, NARA has, which is the National Archives, they have certain requirements for how they will receive data, how long data has to be retained at the federal agency. So, we have retention schedules. And so, we follow those retention schedule for when a program ends and how long we actually keep that data at the center. And then, it transfers over to NARA. But, again, as I said, NARA has some stringent requirements on how they will or will not except that data. So, we are certainly abiding by those requirements from NARA, the retention schedule and the media in which we store that data and send that data to NARA. But, it is a plethora of history, a plethora of data and information, and it tells an incredible story of NASA and the space program. Annette Moore: Yeah, a lot of the things that you see on documentaries, you know. And, I'm imagining is you have to, you have to sort of cradle the data, take care of it, raise it to be. Annette Moore: Absolutely. Host: I guess what NARA is requiring it to be. Annette Moore: Yeah, absolutely. Host: And then, send it off into the world to. Annette Moore: Yeah, yeah. Host: I guess, I guess explore and be used. Annette Moore: Yeah. Well, we value that data very much. We have some of that data in the form of oral history where folks have actually interviewed folks from the old programs, and they have a wealth of information and data that they share. And, that data is not just used for the purposes of memorable content, but it's actually used to inform some of our programs moving forward. Host: Yeah. And, talking about data, just, the landscape where we are now, we're dealing with just insane amount of data. Yeah, and you're talking multiple petabytes. Annette Moore: Yeah. Host: You were talking before. Annette Moore: Yeah. Host: Just billions. It's. Annette Moore: Billions and billions of data. Yeah. Host: It's incredible. So, let's, I guess, start from the beginning and see how we got to this point. How did we get so much data? What were we dealing with, what were some of the legacy technology and information that we were dealing with, and the start of the space program? Annette Moore: So, you know, it's really interesting because I'm going to kind of date myself here. So, I started back in the shuttle day, and I can remember working over in building 30. And, pretty much like, and I wasn't, I wasn't this far dated back. But, when you go to the bank, and you have the pneumatic tubes that they send your money through, through the teller. You know, that actually started as far back as that, you know, in terms of how you transmitted the data. Now, we transmit the data over network lines. We transmit the data via station coming downlinked to the Mission Control. We transmit the data in various forms. We receive the data in various forms. We analyze the data, and then we store the data in various forms. And so, that dates all the way back to the beginning of the shuttle program, all the way back to the beginning of the Apollo era, all the way back to when we were looking at data and deciphering that data and deciding how we needed to store that data, what we needed with that data. And, what data was important and what data wasn't. I think back then, everything was data. We kept everything. We stored everything. When programs expire, they're supposed to actually bring those, that data current and put that data in a format and a form that can go to NARA. We have boxes and boxes of data over, and our archivist is storing that data when a program ends. And so, I've been across several of the centers, and I'm just astounded by the data that they have that they're collecting and that they're storing. So, that's something that we're known for. That's part of our legacy. And, I think it's a great legacy that we have. Host: Yeah. Annette Moore: Yeah. Host: That's, well, the history is phenomenal. Annette Moore: The history is, it's phenomenal. It is. Yeah. Host: So, when you're talking about different kinds of data, going back to those tube days, the pneumatic tubes. You're not talking about information that's stored electronically. You're talking about. Annette Moore: That's right. Host: Physical copies of data that have to be. Annette Moore: That's absolutely right. Host: Physically filed away. Annette Moore: That's absolutely right. I'll tell you, that's true even in our medical profession. Think about when you used to go to that, again, I'm going to age myself. When you, you know, I'd go to the dentist's office, and they'd role out the file cabinet, you know. They'd have the tall file cabinets, and they literally would have a rotary. And, they would roll out, and that's how they stored data. That data now, because there are government requirements now to go to an electronic format for that data. And so, we've moved into that age. We weren't always there. We've moved into that age but think about the cycles of individuals that it takes, the cycles of time, the cycles of transferring across the age of technology to convert that data into a format that is now usable in this current age. So, we've gone through quite a transition with the data. Host: Now, there was, there was a lot of data in our history, too, and, you know, file cabinets, right? You're rolling stuff out. But, not only that, even the technology that was digital. Annette Moore: That's right. Host: Took up a lot of space. Annette Moore: Took up a lot of space. It did. You know, I can remember in my early days of program, and we had the big, round discs that had all of the data for your program files that you would store. It's quite different, and now, you have, what, a little disc that you pop in. You have a little thumb drive that you pop in. Host: Yeah. Annette Moore: But, that actually has tons of data on it as well. Host: But, that's just because of how technology has progressed. Now. Annette Moore: Absolutely. Host: What used to take an entire room, maybe even a floor, we can go back to store the amount of data that you can now store on a thumb drive. Annette Moore: Yes, absolutely. Absolutely. You bet. Host: Now, I'm thinking about Mission Control. This is always one of my, one of my just, I'm blown away by this statistic is the comparison of the data that Mission Control was dealing with versus what a current smartphone can deal with. Annette Moore: Yeah. [laughs] Host: Is it true a smartphone can actually compute more? Annette Moore: That's absolutely true. Back in the Apollo era, that is absolutely true. You bet. Yeah. Host: Wow. Because you were dealing with kilobytes of data, right? Annette Moore: You bet. You bet. Host: Unbelievable. Annette Moore: Yeah, that is. Host: How did that, how did, how can you fly a rocket, how can you communicate a deal with space systems with such little data? It, I mean, why can I not fly a rocket with my phone right now? [ Laughter ] Annette Moore: Well, technology has advanced over time. What we have done with that technology has also changed over time. And, I think our goals and our objectives and where we were trying to get, that's changed over time. And so, with that, all of the things that are associated with it, not just the technology, but the smarts that it takes to do that. That's changed over time. How we test has changed. How we prepare for flight readiness has changed. And so, all of that with that, that advancement of technology has been very necessary. I always tell people NASA hires smart people, and they absolutely do. I look back in the John Glenn day, and I look at what those guys were doing and what they were computing in their heads, what they were computing with pen and paper and how we do it very differently now. But, it's still the same, math is math, yeah. Host: That's true. Yeah, we just have a lot more, I guess, computer help. Annette Moore: We have a lot more computer help. We absolutely do. Host: Yeah. Annette Moore: Yeah. Host: So, the processes of just working in Mission Control, working here and dealing with data. Now, you're talking about converting from a time of you're doing math with hand. Annette Moore: With hand. Host: And, a pen, on your desk, and just dealing with all of the computer. How have you seen the workplace shift over time or know about the shift over time between just dealing with more and more data? Annette Moore: So, it's shift everywhere from the physical construct of the work environment to what's necessary, the tools that are necessary for you to do your job, to the whole thought process behind how you do your job. That has shift. If you look back into even how we were simulated in our work environment, how we work closely together in big rooms where information was being shared. You share information. I share information across the continent to other folks. I share information across to other centers that are on opposite ends of the spectrum from me. So, you share information, and you look at how you do that and how we had to do it once. And, it really composites setting with everyone in the same place at the same time. But, now, technology affords us an allows us to share that information across the globe. I mean, that's phenomenal to me. You know, I think that's how we learn, and that's what we've learned so well. Host: It is, I consider it a fortunate thing that we can access so much information so readily. But, at the same time, sometimes I just want to shut off my phone. Annette Moore: I know. Host: And, just ignore [inaudible]. Annette Moore: I know, yeah. Host: We are very connected. Annette Moore: Yes. Host: Almost too connected. Annette Moore: Well, you know, that, so that's interesting that you say that because the conundrum associated with that is you're concerned then, what about the security of that data that I'm sharing. Host: Yeah. Annette Moore: That becomes a huge concern, and certainly, in my environment, in the CIO environment, in the IT world, you hear it every day. You hear about breeches and compromises. So, we used to be concerned about the device and making sure that the device is secure. What you're really concerned about, and it's a conversation we're having right now, is the data that's on that device. You want to make sure that that data is secure. So, that's huge. Host: Yeah. Because the kinds of data we [inaudible], and we should probably clarify this, is there's so much data, but it's pretty diverse, too. You know. Annette Moore: It is. Host: We're dealing with just regular math equations, like we were saying before, but then, also, there's sensitive aspect to it. Annette Moore: Yeah. You bet you. Host: There's stuff that is preliminary that can be, there's certain sensitivities that you have to protect. Annette Moore: Absolutely. You have scientific data. You have engineering data. You have health data. You have PII data. Very sensitive data at very different levels of that data. You have data that's associated with flight equipment and flight hardware. You have software, and so, yes, it has to be protected, and it has to be protected at different levels. Host: Now, we as a federal agency, I'm sure, have much more restrictions on these kinds of things. Annette Moore: Absolutely. Host: So, what's the environment on what we do to protect this data? Annette Moore: Absolutely. So, we have requirements that all federal agencies are accountable to through OMB, through NIS. Cybersecurity related requirements that require us to secure the data, to protect the data. Now, it's interesting because, as a federal agency, one of the things that NASA has to do is to share that data. That is publicly available data, and so we share that data. We have a Space Act agreement that talks about the sharing of that data with the public, but we also have a requirement and a responsibility to protect that data. And so, with that comes a lot of requirements. Currently, I will tell you at the agency level, through the Office of the CIO, Department of Homeland Security, and it's not just for NASA. It's for all federal agencies. They're providing tools and capabilities that enable us to store that data, to secure that data, and to ensure the security and the protection of that data. Host: And, what's, I guess, unique about this, and you kind of eluded to this before was you're protecting the data that you have, because it's your data, right? But, in order to operate, because we are, we're not just NASA. We are partnered with international. Annette Moore: Absolutely. Host: You know, we're partnered with nations across the globe. Annette Moore: Yes. Host: And, you're right, we have to share this information. So, how do you ensure that we can share what we need to share but that we're going to stay protected, and we're not going to have some sort of incident where people are going to be exposed? Annette Moore: So, they have the same requirements levied on them, and I can assure you they have the same concerns that we have ensure that they share the right information, that they share the right data, and that they protect the data that they share. And so, through our IT security program here at the Johnson Space Center, we're accountable to the OCI, or the Office of the CIO at the agency level. We're accountable to external entities such as Department of Homeland Security, Office of Management and Budget. There are requirements that are levied on us for our cybersecurity program. And, at the center here, through my office, we have a cybersecurity office that's actually our IT security office. With each organization here at the Johnson Space Center, you have representatives within those directorates that are responsible for the security of the systems and the data within their organization. And so, that accountability goes across the board. So, cybersecurity is a responsibility of everyone. That's everyone's responsibility. In your work environment as well as in your home environment. Host: You're right, because ultimately, it's your data, and you might not be a person who's a technical person to deal with it, but ultimately, it's your data that you're responsible for. So, you have to make sure that it's protects, and you're constantly thinking about, am I protected. Annette Moore: Yes. Host: Yeah. Annette Moore: Yes. Host: So, you're talking about requirements, and you're talking about, from the federal level, these restrictions being imposed. What are some of the things that we are required to do? What are some of the, give me an example of a requirement. Annette Moore: Right. Host: That may be, maybe is more difficult to do business. But, is essentially to make sure that we are protected. Annette Moore: So, every system that we have here at the Johnson Space Center has to be under security plan. And, it has to have the authority to operate. So, as the Center's CIO and as the authorizing official for some of those systems, I have to say that that system has the authority to operate. Well, that system has to meet certain requirements. It has to make sure that it has patching. There is scanning and vulnerability testing that's done on those systems, and if any of that is not successful, there has to be a plan of action and milestones and a mitigation plan and strategy to make sure that those systems are healthy. Or, those systems should not be connected to our network. That's a requirement for every system on this Center. And so, when I sign my name to a system as authorizing official, I'm saying that that system is healthy, it does not put the Center at risk, it does not put us in a situation of possible vulnerability occurring with that system. And, I'm signing off on that, as are the other authorizing officials for systems here at the Center. That's a requirement, not just for NASA, but for other federal agencies for their systems. The PIV implementation that we're doing right now, that's securing access to your devices, to your computer, and making sure that where you're going on the network, you have authority, and you have the right to access those systems and that data on those systems. Host: So, that's the, that's the badges that we carry around. Annette Moore: That's the badges. Host: That identify us, but then also say I am Gary, and I can access this computer. Annette Moore: Absolutely. You bet. Host: On the available access that's on this chip. Annette Moore: You bet. Host: Okay. Annette Moore: Yeah. Host: And so, basically, you're saying that all of these, all of these systems are carefully watched, and if some, and they are scanned. Annette Moore: Yes. Host: And, if something is revealed to say there is a vulnerability, there's a chance that something bad could happen, you make a plan of action to go fix it. Annette Moore: Absolutely. Host: Okay. Annette Moore: Absolutely. We don't want things connected to our network that could put us at risk. So, we have critical mission data. We have sensitive human health and performance data. We don't want anything on our systems, in our data, that could put us at risk or that could put our crew at risk or the vehicle at risk. Host: Do you see a lot of instances of folks trying to hack us, trying to, trying to get into our systems and, just you realize, because you understand probably the scope more than any of us. You know, we're sitting pretty. We're on our email. We're doing our thing, but you're saying maybe there's a side to this where we are being attacked. And, maybe we just don't know it, but our security is good enough where we don't know it. Annette Moore: Yeah. Yeah. I think you should always assume that your best posture is to be a posture where you're secured, and you're protected. I think everyone should always assume. I assume that at home with my home computer. You know, I don't click on links. I don't download things that are not credible. I assume that on my home system, I assume that on my work systems. We all should at all times. I mean, I'm not sure about you, but I've gotten a letter or two from LPM about my data being compromised because of a store that I've shopped at and my credit card number got out, as did other folks. I've been in that situation before. I just recently sent one of my siblings a text message. I said, "Hey, I know you were shopping here last month. I just saw on the new where they had a breech." I said, "You probably want to write them, and you probably want to contact your bank." I think we should always all assume that I'm going to be safe and I'm going to make sure that my systems and my data is secure. Host: Yeah. You have to be, it's kind of, you have to be constantly vigilant. Annette Moore: Yes, you do. Host: You have to be constantly aware. Annette Moore: Yes. Yes. Host: Which is kind of a burden, but also necessary. Annette Moore: It's necessary. Yeah, yeah. Host: Now, I was talking about, we were talking about requirements before, and there's obviously security requirements to make sure we're safe. But, going back, we were talking a little bit about NARA and requirements for storing data. What do we have to do to make sure that we are archiving all these great things that we're doing properly so that it could be stored properly? Like, mission videos, like when we do cool things in space and have video of it. I want to make sure that that's kept. Annette Moore: So, we have a records manager. We have each organization has someone within their directorate who is responsible for making sure that we're following the guidelines of NARA. That actually should start at the very beginning of a program, at the very beginning of a program, and it's the same way you do security. You don't do security at the end of the system. You do security at the very beginning, from cradle to grave. And, it's the same way with records retention. When you start kicking off a program, you should, then, start actually recording your records and keeping your records and keeping them according to the requirements for NARA. And so, when that program ends, you've got all your records according to how you're supposed to capture your records, record your records, save your records, file your records. You've got all of that in order. And, that's critically important. As I said, a lot of that data is used on newer programs from previous programs. I had a visit out to Wallace, actually to, I'm sorry, White Sands a couple of months ago. And, years ago, at the very beginning of my career, I worked on small ICPM missiles, and I worked at Peacekeeper and Minuteman. And, to my surprise, I walked in, and there was the missile head from Peacekeeper that I worked on years ago, early in my career. And, we're using information from that to help inform us as we move forward with our new programs such as Orion. And, I was just like, "Wow, that was at the beginning of my career. I can't believe I'm seeing this," you know. Host: Blast from the past. Annette Moore: But that shows the criticality and the importance of maintaining good records and keeping those records from the beginning of a program to the end of that program and making sure that that data and that information, then, can be passed on for future programs. Host: Yes, because it's learning. Annette Moore: It's learning. Absolutely. Host: It's learning. In order to make things better, you need to know how they were first. Annette Moore: Absolutely. Host: Yeah. Annette Moore: Yeah. Host: So, so, we have these requirements to document thing a certain way. Were these, have we captured everything successful, or are there things that we're just, we're just not going to get? Annette Moore: I think what we've done is we've learned along the way. I think we've learned and we've gotten smarter with how we have captured records, how we have retained those records, how we have stored those records. And, I think that program has improved over the years. I've seen it just in the span of time that I've been working in the office of the CIO. I've seen where we've gotten really smart. We've partnered with other organizations. We've partnered with other federal agencies. NARA is very helpful and very good at helping federal agencies [inaudible] because that is a legacy, not just of a federal agency, not just of a program. That's the legacy of our country. Host: Right. Annette Moore: Yeah. Host: Yeah. You know, they want to make sure that it's not lost. Annette Moore: They want to make sure. Yeah. Host: So, they will help us along the way to make sure. Annette Moore: They help us, yeah. Host: Okay. Annette Moore: Yeah. Host: So, so, where, yeah, make sure that we capture all this great history that we're doing. Annette Moore: Yeah. Yeah. Host: Now, I think one of the biggest challenges is it's got to be technology because what used to be maybe a little datapoints with kilobytes of information, now we're getting video. Now, we're going to HD video. Annette Moore: Yeah. Host: There's not only a different kind of data that we're dealing with, but it's larger. Annette Moore: It's larger. Host: And, we got to figure out where to put it because that's a lot of data. Annette Moore: Larger, very sophisticated. Host: Yeah. Annette Moore: Different ways to manipulate the data, different ways to manage the data and maintain the data. And so, we have to progress with the progression of the technology. We have to get smarter with the technology, and we have to really learn how to use it and leverage it to the best advantage that we can and to ensure that it provides capability that we need. Host: So, it sounds like one of the biggest challenges is going to be balance. Balance on the requirements that you have for certain technologies, but then also making sure that you're keeping up with the technology itself. Annette Moore: You bet. Absolutely. Host: So, maybe technology, and people talk about this all the time, is progressing so fast. Annette Moore: Yeah. Host: Not a lot of people can keep up with it. So, how do you write procedures and rules to make sure that we can keep up with it, at least to the best of our knowledge and capability? Annette Moore: So, one of the things that I think is hugely important is that we are staying out there ahead of the technology, or at least in sync with the technology. So, one of the things that we like to ensure that the folks on our team are doing, that they're exposed to this growth in technology, that they're partnering with other organizations outside of federal government, outside of NASA, because folks outside of federal government are, they're taking the risk that we sometimes don't take because we just don't have the opportunity to take that risk. Our schedules, our projects, our timelines, the fact that we're doing, dealing with humans in space, it maybe allows us to not take some of the risks that other folks take in terms of progressing technology. But, in partnering with those folks, benchmarking with those folks, we're learning where the technology is going. I was just at a CIO face to face last week, and we're talking about what are we going to look like three to five to ten years from now. We're not talking about what are we going to look like a year from now. We're talking about what is it going to look like three to five to ten years from now. We have to do that. Host: Yeah. Annette Moore: Yeah. Host: Now, the difficulty is you can, looking ahead, try to think three, five, ten, but then, there's so many technologies that maybe we don't even know are on the horizon. Annette Moore: We don't know. Yeah. Host: That you have to plan for. Annette Moore: Yeah. Host: That's got to be difficult. Annette Moore: Absolutely. Absolutely. Yeah. Host: I know there's just a lot of challenges with dealing with this data, and we were talking about, we're talking about HD video, and now I know recently, we were doing 4K downlinks. Where, now, we're dealing with 4K. Annette Moore: Yeah. Host: So, one of the biggest things I'm thinking of is storage. Do we store a lot of things here on the Center? Annette Moore: We do. We have a data center here, and it's interesting. I love that you just asked me that because we just entered a wonderful partnership that I'm very proud of with Station where we moved over to a new storage content platform for them for all of the imagery that we get, the still, the video. Everything that we get that's downlinked from Station. This is data that we're getting every day. So, just imagine, just the flood of data that's coming in every day. And, we actually entered a partnership with them just last year on a content platform for their storage, and we presented a business case to them. And, this was so exciting for us because it provided us an opportunity not look at where they are just right now. But, at the rate that we're getting data from Station, and that rate is not going to slow down. We wanted to provide a storage platform for them that would allow them to look years out and continue to build on that and not have to be concerned about I'm going to run out of storage space. And so, we sat with them, and we worked with them to understand what their requirements would be, not just for today, but where they saw themselves, five, ten, years from now and built this platform for them out in our data center. And, we're very proud of that. It was a great partnership that we had with them, and we're going to continue to build on that. Host: It was very exciting. Annette Moore: Yeah. Very exciting. Yeah. Host: Now, I think, you know, you're talking about planning, planning farther ahead, even. Annette Moore: Yes. Host: With these, with these servers. So, I'm sure you're thinking of this is going to meet our capabilities for storing now, and then, going back to the requirements of we have to keep our data for. Annette Moore: Yes. Host: A certain amount of time, and then, fit it for NARA requirements. Annette Moore: Exactly. Host: I'm sure that's part of the plan, too. Annette Moore: Yes. Yes. And, part of what we look at when we look at that, as well, particularly in the subject of storage, is we look at, so, when do we move or what do we move into the cloud environment. Because, that allows us more elasticity in terms of storage capability for our data. You know, there's that security element around that as well. Host: Yeah. Annette Moore: Who owns your data? Host: Right. Annette Moore: You know, what are the requirements for your data being in the cloud? What's the cost of being in the cloud? So, those are all of the things that you have to consider, and that's certainly part of the conversation when we look at what our options are for storage. And, not just storage, but how we can securely store our data and affordably store our data. Host: It's a big balance, right? Annette Moore: It is. Host: Secure but affordability. Because you can keep it here, but then you have to buy these servers. Now, you have to have this machinery, this hardware that's going to keep everything. That can get up the costs. It's yours, and you're secure because it's not, you know it's your data. So, you got that, but then, at the same time, technology is maybe going toward the cloud, and how do we fit things into the cloud but make it still ours? I can see where there's a lot of back and forth there. Annette Moore: I love where this conversation is going because we were just talking earlier about requirements that are imposed on us at a federal level. We're a federal agency. Host: Yeah. Annette Moore: And, one of the things that we had a requirement for, and not just us NASA, but federal agencies, was to reduce our footprint for our data center. Reduce our physical footprint, the number of data centers that we have. And so, that's when you look at technologies like going to cloud and how you can enable that. Host: Wow. So, okay. So, it's actually looking at requirements to limit what we have physically, and to. Annette Moore: Absolutely. Host: Actually opt into using cloud technology. Annette Moore: Yeah. Host: That's pretty significant. Annette Moore: That is. Host: But, now, you have a whole bunch of more challenges of security and ownership and. Annette Moore: Absolutely. Host: Stuff like that that you have to deal with down the road. Annette Moore: Absolutely. Yes. Host: Lot of challenges going on. Annette Moore: Lot of challenges, but you know, I will tell you, I really see those challenges as opportunities. And, that's what I tell my team. Those challenges are really opportunities for us to move forward, you know. I want to be in control of my destiny. Host: Yeah. Annette Moore: I don't want someone to be in control of that for me. I want to be in control of that. I want to be at the table when we're talking about where this agency is going to be three, five, ten years from now, what our future looks like. That's hugely exciting. Host: It is very exciting. Now, thinking towards the future and making sure we can, we can get there, I actually am going to redivert this to the past. And, we were talking about, you know, we have data centers that have this digital technology stored in these servers. So, we can, we can house our own data here, but we have different types of data. We have, we have tapes from the Apollo days and from, and from shuttle days that we need to convert. What's that process look like? How are we doing that? How are we taking this older technology and converting it? Annette Moore: I would love to take you on a tour out to what we call our farm, because. Host: Okay. Annette Moore: We literally have the reel-to-reel tapes that I can remember as a kid. You probably can't, but I can. [ Laughter ] You know, the reel-to-reel tapes, and we are actually converting that to digital format. And so, that's happening right here on site. That's happening at other centers because other centers have that same challenge. When you think back to that era where all you had were the reel-to-reel tapes. That's all you had. So, now, you've got to convert that because some of that tape also is going through what they call the vinegar syndrome where it's deteriorating. So, that's history. That's information. You'll never recapture that if you lose that. So, you want to convert those things to their appropriate format. And, of course, that's not something that NARA would accept. If you've got film that's going through the vinegar syndrome that would not be a good storage solution for NARA with all of the responsibilities that they have for maintaining the legacy for our nation. So, we are, we have moved to technology that is allowing us to convert it. Now, here's the challenge. As you said, plethora and plethora of data. Host: Oh, so much. Annette Moore: So, the time that it takes to do that conversion, trying to do that quick and where that data is still good, and you can get it converted to that new format. Host: You're right. Because you're talking about, I mean, like, shuttle missions, for example. Annette Moore: Exactly. Host: That lasted for weeks, and you just have a continuous stream of weeks of data. Annette Moore: Absolutely. Host: That you have to convert. Annette Moore: Absolutely. Host: But, it's, I like how you're saying that it's, not only is it a requirement that we have to have it digital in order to store it with NARA, now you're talking about just saving the film itself. Annette Moore: The film itself. Yeah. Host: The film itself is going to disappear if we don't do something. Annette Moore: Absolutely. Host: So, we have to do something to save that data. Annette Moore: Absolutely. Absolutely. You know, I'm so proud that the folks in my organization understand the importance of that, the importance of that, the history that that has a legacy that that has, and that they're committed to that. And, I, when I visit the other centers, I see that same commitment to that, you know. And, it's great. Host: It's a lot of hard work. Annette Moore: Yeah, it is. Host: Because it's very monotonous labor, right? You have to, all right. Put in another film reel. Here we go. I mean, there's a lot to it, but it's vital to save that stuff. Annette Moore: And, I got to tell you, I'm going to, you want you to hold me to this. I'm going to take you on a tour out to our farm where the guys are doing that. Host: All right. Annette Moore: They understand that when they pick up that reel of film, that's history that they have in their hand. Host: Yeah. Annette Moore: I can recall getting a call from the guys out there, and they had found a reel of film that showed the original construction of Johnson Space Center. And, they were so excited. They were, "You won't believe what we came across. You won't believe what we found." You know, I mean, they had, they take great pride in doing that, and that's so cool, I think. Host: To be, I mean, to be the first person to hold that. Annette Moore: Yeah, yeah. Host: Film reel in decades. Annette Moore: Yeah. Host: That's got to feel very special. Annette Moore: Yeah. Host: And, to say, "I'm going to save this!" Annette Moore: Yeah. Host: "I'm going to be the person that going to save this." Annette Moore: Exactly, exactly. Host: "For somebody else." It's on record, though, so I'm going to hold you to it. Annette Moore: Yeah, yeah. Host: The tour. [ Laughter ] Annette Moore: You bet. You bet. Host: So, this is probably a very important question to follow up on is we're saving all this data. It's history. We're putting into the archives. What, what are some of the ways that we can use that data? Why would we save all of it versus just, eh, this is important? We don't need it. We don't need to save it. It's just going to take up space. How do you decide what's important, what's not, and why to save it? Annette Moore: So, there are certain requirements for what you have to save. NARA has some requirements on that in terms of the kinds of things you save. I'll give you an example. Even senior executives, things like their email records, that is considered a record. Think about that. Think about what's documented with our Presidents. You know, speeches that they've had, decisions that they've made, you know, law that has been enacted. There is a reason we say that it tells a story. It is our legacy. It says who we are. It informs us. It's in our textbooks. It informs us. It helps us in terms of building our future. Those are things that are vitally important to us as individuals, vitally important to us as a nation, vitally important to us on this globe. Host: Yes, yeah. So, it's, you recognize the importance. I think one of the things on my mind is immediately going to is whenever we've had, whenever we've had some of the recent accidents, right? Annette Moore: Absolutely. Host: So, like, if you're talking about the Columbia accident. Annette Moore: Absolutely. Host: Now, you have this data where you can go back. Annette Moore: Absolutely. Host: Look at every excruciating detail. Annette Moore: Absolutely. Host: Because we have it. Because you saved it. Annette Moore: Yes. Host: And, it's crucial to find out what went wrong, what can we do to fix it, what can we do to prevent it from happening in the future. Annette Moore: You can even think in everyday terms of how we study weather data. You know, so, I was impacted by Hurricane Harvey. Host: Yeah. Annette Moore: And, when I think about the studies that go behind weather and weather patterns and things that they watch for the weather, I'm very grateful for that because that alerts us, it alarms us in a way that keeps us safe. But, that's important for our survival. This data is as well. Host: Yeah. Annette Moore: The survival of our crew. Host: Exactly. It's like the more you know, the more informed decision you can make to make the best decision. Annette Moore: Absolutely. Yeah. Host: Yeah. I'm sorry to hear about Harvey. You were talking. Annette Moore: Yeah. Host: A little bit before, and you are just, it's been crazy with all the traveling. You can't even unload the boxes into the house. It's got to be brutal. Annette Moore: Yeah. Host: You know, looking at, looking at, going back to imagery, I think this is one component of your division that I think is just absolutely fascinating. Annette Moore: Yeah. It is. Host: When you're talking about the beautiful images we're getting from 250 miles above the space station, but all of the rest. What are we, what's the story there? What's the story of the whole imagery component of the division? Annette Moore: So, we have imagery online. We have, as I said, we're getting around the clock. And, I don't think people realize this, but over in building eight, we're getting around the clock downlink from Station. If it's still, if it's video, it's imagery, it's photo shots. We get imagery from test data, and when engineering directorate does test data, we get photos from that. I mean, we get this data around the clock. That's, it tells a story. Host: Yeah. Annette Moore: It absolutely does. That data is used for tests. It's used for engineering analysis. It's used for data analysis. It's used for capturing and telling the story for when the crew is onboard, and what's happening throughout their duration of their crew time. It's used for all of those things, and we keep that data. That imagery is stored. It's very important for us. It's very important for the crew. When they come back, and they've got that data from their flight, they can use that data to do analysis, to do some forward work. That's hugely important. It's hugely important for folks in the engineering directorate as they're making decisions about test data and what they need to tweak, what works, what doesn't work. Hugely important. Yeah. Host: Now, that's actually, I think, one of the coolest parts about the imagery department is you have these still photographers, and not only are they taking artistic photographs and the ones you see online, the films you see of rockets going up. But, it's not, the purpose isn't because it's pretty. Annette Moore: No. Host: The purpose is, like, they're taking close up pictures of hardware. Annette Moore: That's right. Host: They're taking photos of even the crew. Annette Moore: That's right. Host: Is grabbing a camera onboard and taking photos. Annette Moore: That's right. Host: Of things that don't really look too great, but it is vital for engineering purposes. Because it's, like what you said. I love that phrasing. It tells a story. All right. What's going on here? What's the layout? How can we fix it? There's a lot of, it's important, and not only to store but to keep track of, to organize. That must be a pain to organize all those images. Annette Moore: Yeah. Annette Moore: That, well, I think the folks who do that, I've walked through our area where we have all of our imagery, and the folks who are doing that, they love that. And, they, it's like you get to experience having been on station, and you are not really there. You get to experience it as they go through all of these photos, as they go through this still imagery, as they go through the video. They get to be a part of that experience. Host: Yeah. They're part of the story. Annette Moore: Yeah. Host: Because they're living through it, and they're, they have to organize it in their head and come up, like you said. Annette Moore: Yeah. Host: With a story. And, I think the, you hinted at this before, where they're putting it is called imagery online, right? Annette Moore: Yes, it is. Host: That's the repository, right? Annette Moore: It is. Host: That's where everything's going. And, it's just I use it all the time, but it's a place where you can search the images you need. Annette Moore: Yeah. Yeah. Host: So, I'm, you know, me being in PAO, I search the ones that are prettier. That we can put on the web and share with people. Annette Moore: Well, you know, you guys have a pretty cool, cool role. So, I was at the last [inaudible] launch, and you know that we have folks who travel there from PAO who are taking the pictures. And, they're taking the pictures of the launch absolutely. They're taking the pictures of the crew coming out, and they're in their gear, and they're getting ready to get on the bus to go over to the launch pad. Absolutely taking pictures of that, but you know what they're also taking pictures of? I watched one of our astronauts interact with the children of one of our crewmen who is going up. And, you capture that. That's nothing like that. You know, the time that he took with these kids. Their father was getting read to go up. You know, the time that he took with them, and there was someone capturing all of this. You know, that's, do you know what that will mean to them years from now when they look back at that? Host: Oh, yeah. Annette Moore: Yeah. Host: You know, I've talked with quite a few folks on the podcast, and sometimes it just comes down to a single moment. It comes down to, you know, I had one guest write a letter to NASA just say, "Hey, I'm trying to be an astronaut. What should I do?" Annette Moore: Yeah. Yeah. Host: And, they wrote back, and they sent something. Annette Moore: Yeah. Host: Back to her. Annette Moore: Yeah. Host: And, she's like, "Yes. I am so motivated." She dedicated her entire school career and career after that to eventually getting to the Center. Annette Moore: There's nothing that compares to the experience of the human element, one person to. Nothing that compares to that. And, the fact that we can capture that through photos, through imagery, through video, that we capture it in so many ways. That we capture that in the records that we keep and that we pass on from one program to another, that informs the next program and the next mission. Yeah. Host: So, how much of it do we, do we keep for these informational purposes, that we keep for the engineering purposes, for learning and making our systems better and assessing and stuff like that? But, and then, how much are we looking at historical photos and maybe current photos and then sharing them out? What are we doing to share with the public? Annette Moore: So, our imagery online. Anyone within the NASA community can get through that. We also have an agreement with U of H Clear Lake. So, we have some imagery and some things through U of H Clear Lake. So, they actually have some records as well on file. So, NASA, if you look in our Space Act agreement, you know, we're a public entity. We're not an entity unto ourselves, so we exist for the purpose of, you know, of furthering humans in exploration, in space, and in all of those avenues. And so, the data that we have is not just unto ourselves. Certainly, there is a proprietary piece of that data that is used for research, that's used for human exploration, that's used for the furtherment of other missions and other programs. But, there's also a portion of that data that we are obligated to make available to the public. There is a portion of that data for historical purposes that we're obligated through NARA to make available as well. And so, that data is not just something that we parse out amongst the NASA community, but that data is shared across all kinds of venues for various reasons. Research and development, engineering, scientific and data analysis, for the general public. You know, and that's absolutely obvious when you look at our education program and how we make information available through our education program. Host: That's interesting that they're obligated. That we, we have a requirement to share this stuff. Do you know how far back we have to go until it says, "Anything past this date, that's the [inaudible],"? Annette Moore: So, for your program, when you start your program up, NARA has what they call a retention schedule. So, that retention schedule says this data, this kind of data, you have to save. You have to archive it for this period of time. And, after that period of time, you're not obligated. So, our in building 412, we have data that we're obligated to hold on site, physically, on site until its retention date has passed. And, we have what's called retention schedules. Once it hits its retention schedule, then we can send it to NARA, but it has a requirement that you hold it. And, that's for a reason. So, when we sent something to NARA, once we sent it to NARA, we have to, then, retrieve it. So, if you have to retrieve that data because you want to study that for another program that's coming up. So, it costs us to store the data with NARA, and it also costs us to retrieve that data. Host: Oh, yeah. Annette Moore: So, we want to retain that data and hold on to it until we can get as much as we can out of the life of that data. Host: Yeah. Annette Moore: And then, we will pass that data on according to the retention schedules. So, there are requirements on the data, and it has retention schedules that NARA establishes for the data. Host: So, it's like, we're required to retain it here, and that makes sense because it's fresh data. We want to use it. We want to have ready access to it. Annette Moore: Absolutely. Host: Limit the cost of it. We want to protect it. That makes a lot of sense. And then, it comes to a certain point where you have to retain it for, like you said, this amount of time. And then, you go over to NARA, and then, I guess, when it goes to NARA, that's public record, and right? Annette Moore: Right. And so, you also have what are called permanent records. Host: Permanent. Annette Moore: There are things that are permanent records. So, that's in that movie, "Raiders of the Lost Ark". When he goes, you know, those are, that's permanent records. Those records will never be destroyed. So, yeah. Host: Wow. Annette Moore: Yeah. Host: Now, I can't even imagine the amount of data to be permanent. Annette Moore: So, on one of my next trips to D.C., I'm going to the National Archives because I want to see for myself. I've actually had friends who have gone to the National archives and researched generations and generations back in their family. Host: Wow. Annette Moore: Yeah. Host: Oh, because they, yeah, archive all of that stuff. Annette Moore: Yeah. Annette Moore: Oh, my gosh. Annette Moore: Yeah. Annette Moore: I can't even imagine. That's so, that's like a never-ending construction project. Annette Moore: Yeah, yeah. Annette Moore: To build more and more as more data comes in. And, yet, we're required to keep more data, and. Annette Moore: Yeah. Host: Data becomes larger. I'm thinking. Annette Moore: Yes, it does. Host: My media files are up to 4K video. Oh, my gosh, dealing with that is such a pain. Annette Moore: Yeah. Host: It takes forever to downlink from the Station, and then it takes forever to work with. I mean, I have a tight computer, but, man, that's a lot. I think, so, what's nice about having you here, Annette, is you oversee all of this, right? So, you oversee the imagery. You oversee the storage. You oversee. So, there's so much to IRD that you're directorate, that it's just unbelievable. And then, on top of that, you're CIO. You got a large responsibility. I think one of the biggest things, and it's selfish for me as an employee here, but you're looking at working with ASIS, right? And, end user, so my computer. Not only are you looking at the imagery from the station, you're looking at my computer. So, how does that work? How do we manage the information technology that we have at our desks? Annette Moore: So, I'm responsible for that, as you said, and I'm responsible for that through two contract vehicles. So, we have the enterprise contract vehicle which is through ASIS, NIX east and west. So, we have the enterprise model, and then I have local contract that provides some additional IT support to the Center. And so, that's managed through two different offices within IRD. The IC Office has the ASIS contract under them, and then the IB office which is my information management. And then, my multimedia office. I think you probably know Ed and his team. So, they manage those two separate contracts. And, I'm responsible for that for the Center. And, I take that very personally. You know, when someone says, "Well, my computer is, I'm having issues with my computer." I take that very personally. You know. Host: Yeah. Annette Moore: I'm responsible for that, and that means a lot to me. You know, I've, I call folks. "So, how's your computer? Did we fix it? Is everything okay? Follow back with me and let me know if you're not satisfied with." So, I'm responsible for that as the CIO and as the director of IRD. It's kind of like a Dr. Jekyll Mr. Hyde thing. So, as a Director of IRD, that's the provider of your IT services here at the Center. As the CIO, that's almost like the policing and enforcing. That's the policy piece, the oversight. And, you see how the two can, might sometime conflict. Host: Yeah. Yeah. Annette Moore: But, I take both of those roles very seriously. The customer experience is paramount for me. That's critical, so. Host: It's a lot to oversee. How do you do it? What's your background, by the way? Annette Moore: So, I'm, my undergrad is in double e, electrical engineering. Host: Okay. Annette Moore: And then, so here is a twist. My Masters is in Elementary Ed. Host: Whoa. Annette Moore: Yeah. Interesting story. So, as a freshman, my mom and I were just, she was my best friend going through school. And, when I got ready to graduate, she told me, she said, "You're going to major in electrical engineering." I'm like, "Why?" She said, "Because you'll do well in that, and you'll make good money. And, you'll just do well in that." Unfortunately, my mom passed of breast cancer my freshman semester that I was in college. That was such a hard blow for me. That was really hard. I almost did not make it through school, I'll tell you that. Host: Yeah. It must have been hard. Annette Moore: But, it taught me a lot. It taught me a lot about perseverance. It taught me a lot about what's important. It taught me a lot about people. So, the way I do this job is that I trust the people who do the job. And, I tell the folks in my organization, "I work for you. My job is to ensure that you have everything that you need to be successful. If you don't, then I have not done my job." And so, I very much see myself as a servant leader. I'm service oriented in making sure that the people at this center have everything that they need to do the mission and make sure that the mission is successful. So. Host: That's it. That, you do it, you don't do it all. You empower others to do it all. Annette Moore: Absolutely. Absolutely. Host: And, maintain that accountability and trust within the organization. Annette Moore: Absolutely. Host: Huge part of being a leader. Annette Moore: Yeah. I tell them, "You guys are the smart people in the room. Not me." [ Laughter ] And, I'm smart enough to know that. Host: And, I'm smart enough to let you be smart. Annette Moore: Absolutely. Host: There you go. All right. Well, Annette, that is such a nice overview of IRD. I feel like there's more that we can go into, but it's just hearing your passion for what you do and what you oversee, and not only that, but the people that you work with. It's truly inspiring. So, I appreciate you coming on the podcast today. Annette Moore: Oh, thank you so much. I appreciate you asking me to do this, and you've got it on record. I'm going to ask [inaudible] so I can get you out to the farm because I really want you to see this. It's pretty cool. It's cool. Host: That would be lovely. Thank you. Annette Moore: Yeah. Yeah. Thank you. [ Music ] Houston, go ahead. [inaudible] shuttle. Roger. [inaudible] Space for all mankind. Actually a huge honor to break a record like this. Not because they are easy, but because they are hard. Houston, welcome to space [echo]. Host: Hey, thanks for sticking around. So, today, we talked with Ms. Annette Moore about the data and information that we're dealing with in space and then also here in the Center at the NASA Johnson Space Center. Some of the places that we store imagery, deal with imagery, protect imagery, and data and information. And, it's actually incredible. This is episode 45 of the podcast. We are in no particular order. It's just, that's just how we keep track of everything. So, you can go back and listen other great podcasts on dealing with the space station and especially here on the Center. We actually talked a while back. I'm trying to remember which episode. I think it's episode 12, we talked with the Center Director, Ellen Ochoa about just what we do here in Houston. And, this is just a small part of what we do in Houston, and yet, it's so broad and huge. It's actually incredible. So, you can go listen to that one. I think it's called "Leading Human Space Exploration". I believe it's episode 12. Otherwise, you can listen to some of our other NASA podcasts. We have "Gravity Assist" hosted up at headquarters by Dr. Jim Green that talks about planetary science, and then we have our friends over in Ames Research Center for their podcast "NASA in Silicon Valley". They talk about the stuff that they're doing over there in California and helping us out with some of the research aboard the International Space Station. Otherwise, you can visit our social media sites, both the NASA Johnson Space Center accounts and International Space Station accounts on Facebook, Instagram, and Twitter. Use the hashtag ask NASA on your favorite platform to submit an idea. And then, we'll make sure to make it into an episode of "Houston, We Have a Podcast". So, this episode was recorded on April 18, 2018. Thanks to Alex Perryman, Kelly Humphries, Pat Ryan, Bill Stafford, and Eloisa Sidler. And, thanks again to Ms. Annette Moore for coming on the show. We'll be back next week.

Efficient Distribution of Triggered Synchronous Block Diagrams

DTIC Science & Technology

2011-10-21

corresponding FFP processes, from P to P ′. The sizes of the queues are as in [23]. In particular, if M is not Moore, a queue of size 1 suffices; ifM is Moore...computer systems. Real-Time Systems, 14(3):219–250, 1998. [23] S . Tripakis, C. Pinello, A . Benveniste, A . Sangiovanni-Vincent, P. Caspi, and M . Di...of connections: a data connection connects some output port of a block M to some input port of another block M ′; a trigger connection connects some

Mooring line damping estimation for a floating wind turbine.

PubMed

Qiao, Dongsheng; Ou, Jinping

2014-01-01

The dynamic responses of mooring line serve important functions in the station keeping of a floating wind turbine (FWT). Mooring line damping significantly influences the global motions of a FWT. This study investigates the estimation of mooring line damping on the basis of the National Renewable Energy Laboratory 5 MW offshore wind turbine model that is mounted on the ITI Energy barge. A numerical estimation method is derived from the energy absorption of a mooring line resulting from FWT motion. The method is validated by performing a 1/80 scale model test. Different parameter changes are analyzed for mooring line damping induced by horizontal and vertical motions. These parameters include excitation amplitude, excitation period, and drag coefficient. Results suggest that mooring line damping must be carefully considered in the FWT design.

Mooring Line Damping Estimation for a Floating Wind Turbine

PubMed Central

Qiao, Dongsheng; Ou, Jinping

2014-01-01

The dynamic responses of mooring line serve important functions in the station keeping of a floating wind turbine (FWT). Mooring line damping significantly influences the global motions of a FWT. This study investigates the estimation of mooring line damping on the basis of the National Renewable Energy Laboratory 5 MW offshore wind turbine model that is mounted on the ITI Energy barge. A numerical estimation method is derived from the energy absorption of a mooring line resulting from FWT motion. The method is validated by performing a 1/80 scale model test. Different parameter changes are analyzed for mooring line damping induced by horizontal and vertical motions. These parameters include excitation amplitude, excitation period, and drag coefficient. Results suggest that mooring line damping must be carefully considered in the FWT design. PMID:25243231

Effects of single moor baths on physiological stress response and psychological state: a pilot study

NASA Astrophysics Data System (ADS)

Stier-Jarmer, M.; Frisch, D.; Oberhauser, C.; Immich, G.; Kirschneck, M.; Schuh, A.

2017-11-01

Moor mud applications in the form of packs and baths are widely used therapeutically as part of balneotherapy. They are commonly given as therapy for musculoskeletal disorders, with their thermo-physical effects being furthest studied. Moor baths are one of the key therapeutic elements in our recently developed and evaluated 3-week prevention program for subjects with high stress level and increased risk of developing a burnout syndrome. An embedded pilot study add-on to this core project was carried out to assess the relaxing effect of a single moor bath. During the prevention program, 78 participants received a total of seven moor applications, each consisting of a moor bath (42 °C, 20 min, given between 02:30 and 05:20 p.m.) followed by resting period (20 min). Before and after the first moor application in week 1, and the penultimate moor application in week 3, salivary cortisol was collected, blood pressure and heart rate were measured, and mood state (Multidimensional Mood State Questionnaire) was assessed. A Friedman test of differences among repeated measures was conducted. Post hoc analyses were performed using the Wilcoxon signed-rank test. A significant decrease in salivary cortisol concentration was seen between pre- and post-moor bath in week 1 ( Z = -3.355, p = 0.0008). A non-significant decrease was seen between pre- and post-moor bath in week 3. Mood state improved significantly after both moor baths. This pilot study has provided initial evidence on the stress-relieving effects of single moor baths, which can be a sensible and recommendable therapeutic element of multimodal stress-reducing prevention programs. The full potential of moor baths still needs to be validated. A randomized controlled trial should be conducted comparing this balneo-therapeutic approach against other types of stress reduction interventions.

Rocking the Boat: Damage to Eelgrass by Swinging Boat Moorings.

PubMed

Unsworth, Richard K F; Williams, Beth; Jones, Benjamin L; Cullen-Unsworth, Leanne C

2017-01-01

Seagrass meadows commonly reside in shallow sheltered embayments typical of the locations that provide an attractive option for mooring boats. Given the potential for boat moorings to result in disturbance to the seabed due to repeated physical impact, these moorings may present a significant threat to seagrass meadows. The seagrass Zostera marina (known as eelgrass) is extensive across the northern hemisphere, forming critical fisheries habitat and creating efficient long-term stores of carbon in sediments. Although boat moorings have been documented to impact seagrasses, studies to date have been conducted on the slow growing Posidonia species' rather than the fast growing and rapidly reproducing Z. marina that may have a higher capacity to resist and recover from repeated disturbance. In the present study we examine swinging chain boat moorings in seagrass meadows across a range of sites in the United Kingdom to determine whether such moorings have a negative impact on the seagrass Zostera marina at the local and meadow scale. We provide conclusive evidence from multiple sites that Z. marina is damaged by swinging chain moorings leading to a loss of at least 6 ha of United Kingdom seagrass. Each swinging chain mooring was found to result in the loss of 122 m 2 of seagrass. Loss is restricted to the area surrounding the mooring and the impact does not appear to translate to a meadow scale. This loss of United Kingdom seagrass from boat moorings is small but significant at a local scale. This is because it fragments existing meadows and ultimately reduces their resilience to other stressors. Boat moorings are prevalent in seagrass globally and it is likely this impairs their ecosystem functioning. Given the extensive ecosystem service value of seagrasses in terms of factors such as carbon storage and fish habitat such loss is of cause for concern. This indicates the need for the widespread use of seagrass friendly mooring systems in and around seagrass.

Rocking the Boat: Damage to Eelgrass by Swinging Boat Moorings

PubMed Central

Unsworth, Richard K. F.; Williams, Beth; Jones, Benjamin L.; Cullen-Unsworth, Leanne C.

2017-01-01

Seagrass meadows commonly reside in shallow sheltered embayments typical of the locations that provide an attractive option for mooring boats. Given the potential for boat moorings to result in disturbance to the seabed due to repeated physical impact, these moorings may present a significant threat to seagrass meadows. The seagrass Zostera marina (known as eelgrass) is extensive across the northern hemisphere, forming critical fisheries habitat and creating efficient long-term stores of carbon in sediments. Although boat moorings have been documented to impact seagrasses, studies to date have been conducted on the slow growing Posidonia species’ rather than the fast growing and rapidly reproducing Z. marina that may have a higher capacity to resist and recover from repeated disturbance. In the present study we examine swinging chain boat moorings in seagrass meadows across a range of sites in the United Kingdom to determine whether such moorings have a negative impact on the seagrass Zostera marina at the local and meadow scale. We provide conclusive evidence from multiple sites that Z. marina is damaged by swinging chain moorings leading to a loss of at least 6 ha of United Kingdom seagrass. Each swinging chain mooring was found to result in the loss of 122 m2 of seagrass. Loss is restricted to the area surrounding the mooring and the impact does not appear to translate to a meadow scale. This loss of United Kingdom seagrass from boat moorings is small but significant at a local scale. This is because it fragments existing meadows and ultimately reduces their resilience to other stressors. Boat moorings are prevalent in seagrass globally and it is likely this impairs their ecosystem functioning. Given the extensive ecosystem service value of seagrasses in terms of factors such as carbon storage and fish habitat such loss is of cause for concern. This indicates the need for the widespread use of seagrass friendly mooring systems in and around seagrass. PMID:28791040

Shock Compression Chemistry in Materials Synthesis and Processing

DTIC Science & Technology

1984-12-21

Moore at Los Alamos Scientific Laboratory [Schmidt, Moore, and Shaner, 1983; Schmidt, Moore, Schiferl , and Shaner, 1983]. More speculative, but also...Synthesis and Processing, March 28-29, Seattle, Washington. Schmidt, S. C., D. S. Moore, D. Schiferl , and J. W. Shaner. 1983. Backward stimulated Raman

Altered fish community and feeding behaviour in close proximity to boat moorings in an urban estuary.

PubMed

Lanham, Brendan S; Vergés, Adriana; Hedge, Luke H; Johnston, Emma L; Poore, Alistair G B

2018-04-01

Coastal urbanization has led to large-scale transformation of estuaries, with artificial structures now commonplace. Boat moorings are known to reduce seagrass cover, but little is known about their effect on fish communities. We used underwater video to quantify abundance, diversity, composition and feeding behaviour of fish assemblages on two scales: with increasing distance from moorings on fine scales, and among locations where moorings were present or absent. Fish were less abundant in close proximity to boat moorings, and the species composition varied on fine scales, leading to lower predation pressure near moorings. There was no relationship at the location with seagrass. On larger scales, we detected no differences in abundance or community composition among locations where moorings were present or absent. These findings show a clear impact of moorings on fish and highlight the importance of fine-scale assessments over location-scale comparisons in the detection of the effects of artificial structures. Copyright © 2018 Elsevier Ltd. All rights reserved.

Verifying the interactive convergence clock synchronization algorithm using the Boyer-Moore theorem prover

NASA Technical Reports Server (NTRS)

Young, William D.

1992-01-01

The application of formal methods to the analysis of computing systems promises to provide higher and higher levels of assurance as the sophistication of our tools and techniques increases. Improvements in tools and techniques come about as we pit the current state of the art against new and challenging problems. A promising area for the application of formal methods is in real-time and distributed computing. Some of the algorithms in this area are both subtle and important. In response to this challenge and as part of an ongoing attempt to verify an implementation of the Interactive Convergence Clock Synchronization Algorithm (ICCSA), we decided to undertake a proof of the correctness of the algorithm using the Boyer-Moore theorem prover. This paper describes our approach to proving the ICCSA using the Boyer-Moore prover.

Development of moored oceanographic spectroradiometer

NASA Technical Reports Server (NTRS)

Booth, Charles R.; Mitchell, B. Greg; Holm-Hansen, O.

1987-01-01

Biospherical Instruments has successfully completed a NASA sponsored SBIR (Small Business Innovational Research Program) project to develop spectroradiometers capable of being deployed in the ocean for long periods of time. The completion of this project adds a valuable tool for the calibration of future spaceborne ocean color sensors and enables oceanographers to extend remote sensing optical techniques beyond the intermittent coverage of spaceborne sensors. Highlights of the project include two moorings totalling 8 months generating extensive sets of optical, biological, and physical data sets in the ocean off La Jolla, California, and a 70 day operational deployment of the resulting commercial product by the ONR and NASA sponsored BIOWATT program. Based on experience gained in these moorings, Biospherical Instruments has developed a new line of spectroradiometers designed to support the oceanographic remote sensing missions of NASA, the Navy, and various oceanographers.

The hyperbolic problem

NASA Astrophysics Data System (ADS)

Gualdesi, Lavinio

2017-04-01

Mooring lines in the Ocean might be seen as a pretty simple seamanlike activity. Connecting valuable scientific instrumentation to it transforms this simple activity into a sophisticated engineering support which needs to be accurately designed, developed, deployed, monitored and hopefully recovered with its precious load of scientific data. This work is an historical travel along the efforts carried out by scientists all over the world to successfully predict mooring line behaviour through both mathematical simulation and experimental verifications. It is at first glance unexpected how many factors one must observe to get closer and closer to a real ocean situation. Most models have dual applications for mooring lines and towed bodies lines equations. Numerous references are provided starting from the oldest one due to Isaac Newton. In his "Philosophiae Naturalis Principia Matematica" (1687) the English scientist, while discussing about the law of motion for bodies in resistant medium, is envisaging a hyperbolic fitting to the phenomenon including asymptotic behaviour in non-resistant media. A non-exhaustive set of mathematical simulations of the mooring lines trajectory prediction is listed hereunder to document how the subject has been under scientific focus over almost a century. Pode (1951) Prior personal computers diffusion a tabular form of calculus of cable geometry was used by generations of engineers keeping in mind the following limitations and approximations: tangential drag coefficients were assumed to be negligible. A steady current flow was assumed as in the towed configuration. Cchabra (1982) Finite Element Method that assumes an arbitrary deflection angle for the top first section and calculates equilibrium equations down to the sea floor iterating up to a compliant solution. Gualdesi (1987) ANAMOOR. A Fortran Program based on iterative methods above including experimental data from intensive mooring campaign. Database of experimental drag coefficients obtained in wind tunnel for the instrumentation verified in ocean mooring. Dangov (1987) A set of Fortran routines, due to a Canadian scientist, to analyse discrepancies between model and experimental data due to strumming effect on mooring line. Acoustic Doppler Current Profiler's data were adopted for the first time as an input for the model. Skop and O' Hara (1968) Static analysis of a three dimensional multi-leg model Knutson (1987) A model developed at David taylor Model basin based on towed models. Henry Berteaux (1990) SFMOOR Iterative FEM analysis fully fitted with mooring components data base developed by a WHOI scientist. Henry Berteaux (1990) SSMOOR Same model applied to sub-surface moorings. Gobats and Grosenbaugh (1998) Fully developed Method based on Strip Theory developed by WHOI scientists. Experimental validation results are not known.

In situ tryptophan-like fluorometers: assessing turbidity and temperature effects for freshwater applications.

PubMed

Khamis, K; Sorensen, J P R; Bradley, C; Hannah, D M; Lapworth, D J; Stevens, R

2015-04-01

Tryptophan-like fluorescence (TLF) is an indicator of human influence on water quality as TLF peaks are associated with the input of labile organic carbon (e.g. sewage or farm waste) and its microbial breakdown. Hence, real-time measurement of TLF could be particularly useful for monitoring water quality at a higher temporal resolution than available hitherto. However, current understanding of TLF quenching/interference is limited for field deployable sensors. We present results from a rigorous test of two commercially available submersible tryptophan fluorometers (ex ∼ 285, em ∼ 350). Temperature quenching and turbidity interference were quantified in the laboratory and compensation algorithms developed. Field trials were then undertaken involving: (i) an extended deployment (28 days) in a small urban stream; and, (ii) depth profiling of an urban multi-level borehole. TLF was inversely related to water temperature (regression slope range: -1.57 to -2.50). Sediment particle size was identified as an important control on the turbidity specific TLF response, with signal amplification apparent <150 NTU for clay particles and <650 NTU for silt particles. Signal attenuation was only observed >200 NTU for clay particles. Compensation algorithms significantly improved agreement between in situ and laboratory readings for baseflow and storm conditions in the stream. For the groundwater trial, there was an excellent agreement between laboratory and raw in situ TLF; temperature compensation provided only a marginal improvement, and turbidity corrections were unnecessary. These findings highlight the potential utility of real time TLF monitoring for a range of environmental applications (e.g. tracing polluting sources and monitoring groundwater contamination). However, in situations where high/variable suspended sediment loads or rapid changes in temperature are anticipated concurrent monitoring of turbidity and temperature is required and site specific calibration is recommended for long term, surface water monitoring.

Verification and Validation of Multisegmented Mooring Capabilities in FAST v8

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andersen, Morten T.; Wendt, Fabian F.; Robertson, Amy N.

2016-07-01

The quasi-static and dynamic mooring modules of the open-source aero-hydro-servo-elastic wind turbine simulation software, FAST v8, have previously been verified and validated, but only for mooring arrangements consisting of single lines connecting each fairlead and anchor. This paper extends the previous verification and validation efforts to focus on the multisegmented mooring capability of the FAST v8 modules: MAP++, MoorDyn, and the OrcaFlex interface. The OC3-Hywind spar buoy system tested by the DeepCwind consortium at the MARIN ocean basin, which includes a multisegmented bridle layout of the mooring system, was used for the verification and validation activities.

Mooring Design Selection of Aquaculture Cage for Indonesian Ocean

NASA Astrophysics Data System (ADS)

Mulyadi, Y.; Syahroni, N.; Sambodho, K.; Zikra, M.; Wahyudi; Adia, H. B. P.

2018-03-01

Fish production is important for the economy in fishing community and for ensuring food security. Climate change will lead a threat to fish productivity. Therefore, a solution offered is to cultivate certain fish, especially those with high economic value by using offshore aquaculture technology. A Sea Station cage is one of the offshore aquaculture cage model that has been used in some locations. As a floating structure, the Sea Station cage need a mooring system to maintain its position. This paper presents the selection analysis of the mooring system designs of the Sea Station cage model that it is suitable with Indonesia Ocean. There are 3 mooring configurations that are linear array, rectangular array, and 4 points mooring type. The nylon mooring rope type has been selected to be used on the 3 mooring configurations and the rope has a diameter of 104 mm with a breaking force of 2.3 MN. Based on results from comparing the 3 mooring configurations, the best mooring configuration is linear array with the tension on the rope of 217 KN and has the safety factor of 0.2 based on DNVGL OS-E301

Parameters sensitivity on mooring loads of ship-shaped FPSOs

NASA Astrophysics Data System (ADS)

Hasan, Mohammad Saidee

2017-12-01

The work in this paper is focused on special assessment and evaluation of mooring system of ship-shaped FPSO unit. In particular, the purpose of the study is to find the impact on mooring loads for the variation in different parameters using MIMOSA software. First, a selected base case was designed for an intact mooring system in a typical ultimate limit state (ULS) condition, and then the sensitivity to mooring loads on parameters e.g. location of the turret, analysis method (quasi-static vs. dynamic analysis), low-frequency damping level in the surge, pretension and drag coefficients on chain and steel wire has been performed. It is found that mooring loads change due to the change of these parameters. Especially, pretension has a large impact on the maximum tension of mooring lines and low-frequency damping can change surge offset significantly.

46 CFR 121.300 - Ground tackle and mooring lines.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Ground tackle and mooring lines. 121.300 Section 121.300 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE... MISCELLANEOUS SYSTEMS AND EQUIPMENT Mooring and Towing Equipment § 121.300 Ground tackle and mooring lines. A...

Stream periphyton responses to mesocosm treatments of ...

EPA Pesticide Factsheets

A stream mesocosm experiment was designed to compare biotic responses among streams exposed to an equal excess specific conductivity target of 850 µS/cm relative to a control that was set for 200 µS/cm and three treatments comprised of different major ion contents. Each treatment and the control was replicated 4 times at the mesocosm scale (16 mesocosms total). The treatments were based on dosing the background mesocosm water, a continuous flow-through mixture of natural river water and reverse osmosis treated water, with stock salt solutions prepared from 1) a mixture of sodium chloride and calcium chloride (Na/Cl chloride), 2) sodium bicarbonate, and 3) magnesium sulfate. The realized average specific conductance over the first 28d of continuous dosing was 827, 829, and 847 µS/cm, for the chloride, bicarbonate, and sulfate based treatments, respectively, and did not differ significantly. The controls averaged 183 µS/cm. Here we focus on comparing stream periphyton communities across treatments based on measurements obtained from a Pulse-Amplitude Modulated (PAM) fluorometer. The fluorometer is used in situ and with built in algorithms distributes the total aerial algal biomass (µg/cm2) of the periphyton among cyanobacteria, diatoms, and green algae. A measurement is recorded in a matter of seconds and, therefore, many different locations can be measured with in each mesocosm at a high return frequency. Eight locations within each of the 1 m2 (0.3 m W x 3

Verification and Validation of Multisegmented Mooring Capabilities in FAST v8: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andersen, Morten T.; Wendt, Fabian; Robertson, Amy

2016-08-01

The quasi-static and dynamic mooring modules of the open-source aero-hydro-servo-elastic wind turbine simulation software, FAST v8, have previously been verified and validated, but only for mooring arrangements consisting of single lines connecting each fairlead and anchor. This paper extends the previous verification and validation efforts to focus on the multisegmented mooring capability of the FAST v8 modules: MAP++, MoorDyn, and the OrcaFlex interface. The OC3-Hywind spar buoy system tested by the DeepCwind consortium at the MARIN ocean basin, which includes a multisegmented bridle layout of the mooring system, was used for the verification and validation activities.

The cicada genus Guyalna Boulard & Martinelli, 1996 (Hemiptera: Cicadidae: Cicadinae: Fidicinini): generic description, twelve new combinations, and a key to species.

PubMed

Sanborn, Allen F

2016-04-25

The cicada genus Guyalna Boulard and Martinelli, 1996 is described fully for the first time. Dorisiana bogotana (Distant, 1892), Dorisiana brisa (Walker, 1850), Fidicinoides coffea Sanborn, Moore & Young, 2008, Fidicinoides distanti (Goding, 1925), Fidicinoides flavipronotum Sanborn, 2007, Dorisiana glauca (Goding, 1925), Dorisiana panamensis (Davis, 1939), Fidicinoides variegata (Sanborn, 2005), and Dorisiana viridifemur (Walker, 1850) are transferred to the genus Guyalna to become Guyalna bogotana (Distant, 1892) n. comb., Guyalna brisa (Walker, 1850) n. comb., Guyalna coffea (Sanborn, Moore & Young, 2008) n. comb., Guyalna distanti (Goding, 1925) n. comb., Guyalna flavipronotum (Sanborn, 2007) n. comb., Guyalna glauca (Goding, 1925) n. comb., Guyalna panamensis (Davis, 1939) n. comb., Guyalna variegata (Sanborn, 2005) n. comb., and Guyalna viridifemur (Walker, 1850) n. comb., respectively. Fidicinoides cachla (Distant, 1899), Fidicinoides compostela (Davis, 1934), Fidicinoides guayabana Sanborn, Moore & Young, 2008, are transferred to Dorisiana Metcalf, 1952 to become Dorisiana cachla (Distant, 1899) n. comb., Dorisiana compostela (Davis, 1934) n. comb., and Dorisiana guayabana (Sanborn, Moore & Young, 2008) n. comb., respectively. The current 25 species of the genus are listed along with their synonymies and known distribution of each species. Finally, a key to the species of Guyalna is provided.

PMEL Contributions to the OceanSITES Program

DTIC Science & Technology

2006-09-01

System and international research programs. PMEL is a major contribu- tor to OceanSITES in the context of the Tropical Ocean At- mosphere/ Triangle ...include five TAO moorings, the KEO mooring, and non- PMEL moorings off of Hawaii and Bermuda (Fig. 1, Table 3). The prototype for the moored CO2 system was

HYDROBS: a long-term autonomous mooring for passive acoustic monitoring

NASA Astrophysics Data System (ADS)

Hello, Y.; Royer, J. Y.; Yegikyan, M.

2017-12-01

Passive acoustics proves an effective way for monitoring the low-level seismic activity of the ocean floor and low-frequency sounds from the ocean (baleen whales, sea-state, icebergs). Networks of synchronized autonomous hydrophones have thus been commonly deployed in the world ocean to monitor large sections of mid-oceanic ridges. HYDROBS is an improved system that meet two requirements: an easy access to the data collected by the instruments together with long-term deployments - up to 4 consecutive years - reducing the need of large vessels capable of yearly mooring operations in open seas. The system has two components: a data logger, up-to-date but similar to previous systems, and three messengers, releasable on demand to collect the data. The mooring line itself is classical, with an expandable weight at the sea-bottom to maintain the mooring, an acoustic release to free the mooring line for recovery, a line adjustable to the seafloor depth, and an immerged buoy, holding the acquisition system, to maintain the sensors at a constant depth and to bring the mooring line to the surface for its recovery. The data logger is based on a low-power microprocessor, an A/D-32bit convertor sampling at 250Hz, a 10-8 real time clock and SD card storage. Lithium batteries provide 3-4 years of autonomy. Acoustic communications with the surface-ship provide control over all functionalities at deployment and a health bulletin on demand. The 3 shuttles, encapsulated in 13" glass spheres, use the same CPU board and clock as the main station. Data transfer from the data logger to the shuttles is wireless (1Mbit/s digital inductive through water). Data are duplicated once per day on shuttles N and N+1 for redundancy. Prior to their release by acoustic command, the shuttles are synchronized with the master clock. At sea-surface, shuttles (as the main unit) look for GPS time and calculate their clock drift. So, the master clock drift can be monitored over time at every shuttle release until its final recovery. Shuttles and main unit are located on the sea-surface by AIS. Iridium communications can also be set to warn the user of a false release. A non-specialist can thus easily handle a shuttle recovery from a ship of opportunity. With 4-channels, this system is also suitable to monitor other parameters in the water column, continuously and over long periods.

Turbulence Measurements from Compliant Moorings. Part II: Motion Correction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kilcher, Levi F.; Thomson, Jim; Harding, Samuel

2017-06-01

Acoustic Doppler velocimeters (ADVs) are a valuable tool for making highprecision measurements of turbulence, and moorings are a convenient and ubiquitous platform for making many kinds of measurements in the ocean. However—because of concerns that mooring motion can contaminate turbulence measurements and acoustic Doppler profilers are relatively easy to deploy—ADVs are not frequently deployed from moorings. This work details a method for measuring turbulence using moored ADVs that corrects for mooring motion using measurements from inertial motion sensors. Three distinct mooring platforms were deployed in a tidal channel with inertial motion-sensor-equipped ADVs. In each case, the motion correction based onmore » the inertial measurements dramatically reduced contamination from mooring motion. The spectra from these measurements have a shape that is consistent with other measurements in tidal channels, and have a f^(5/3) slope at high frequencies—consistent with Kolmogorov’s theory of isotropic turbulence. Motion correction also improves estimates of cross-spectra and Reynold’s stresses. Comparison of turbulence dissipation with flow speed and turbulence production indicates a bottom boundary layer production-dissipation balance during ebb and flood that is consistent with the strong tidal forcing at the site. These results indicate that inertial-motion-sensor-equipped ADVs are a valuable new tool for measuring turbulence from moorings.« less

Analysis and design of trial well mooring in deepwater of the South China Sea

NASA Astrophysics Data System (ADS)

Guo, Yongfeng; Ji, Shaojun; Tang, Changquan; Li, Jiansong; Zhong, Huiquan; Ian, Ong Chin Yam

2012-06-01

Mooring systems play an important role for semi-submersible rigs that drill in deepwater. A detailed analysis was carried out on the mooring of a semi-submersible rig that conducted a trial well drilling at a deepwater location in the South China Sea in 2009. The rig was 30 years old and had a shallow platform with a designed maximum operating water depth of 457 m. Following the mooring analysis, a mooring design was given that requires upgrading of the rig's original mooring system. The upgrade included several innovations, such as installing eight larger anchors, i.e. replacing the original anchors and inserting an additional 600 m of steel wires with the existing chains. All this was done to enhance the mooring capability of the rig in order for the rig to be held in position to conduct drilling at a water depth of 476 m. The overall duration of the drilling was 50 days and the upgraded mooring system proved to be efficient in achieving the goal of keeping the rig stationary while it was drilling the trial well in the South China Sea. This successful campaign demonstrates that an older semi-submersible rig can take on drilling in deep water after careful design and proper upgrading and modification to the original mooring system.

What is going on up there? - The Chukchi Sea Ecosystem Mooring

NASA Astrophysics Data System (ADS)

Janzen, C.; McCammon, M.; Danielson, S. L.; Winsor, P.; Hopcroft, R. R.; Lalande, C.; Stafford, K.; Hauri, C.; McDonnell, A. M. P.

2016-02-01

As Arctic regions are projected to strongly reflect the impacts of a changing climate, an effort is underway to make sustained, year-round measurements of concurrent physical and biogeochemical parameters in the Arctic. Deploying highly instrumented year-round moorings in the water is no simple feat, given harsh Arctic conditions that include the presence of sea ice and deep ice keels during much of the year. Enter the late-breaking ecosystem mooring located in the northeast Chukchi Sea. This mooring complements established biophysical moorings elsewhere in the northern Bering and Chukchi seas, including those maintained by NOAA-PMEL (M8), UW-APL (Bering Strait) and JAMSTEC moorings. (southern Chukchi and Barrow Canyon). The mooring described here is located on the southern flank of Hanna Shoal and provides a multi-disciplinary approach to year-round observations within a biological hotspot. The Chukchi Ecosystem Mooring is equipped with a sensor suite aimed to monitor and document the state of ocean acidification, nutrient and carbon cycles, particles, waves, currents and physical properties, and even passive and active acoustic monitoring for zooplankton, fish, and marine mammals. Having the simultaneous interdisciplinary measurements provides data valuable to an ecosystem-based approach to research and resource management. The fully outfitted observatory is providing an unprecedented view into the mechanistic workings of the Chukchi Shelf Ecosystem. The first mooring was deployed in September 2014 and recovered in August 2015. The August 2015 deployment consisted of three moorings, each with incremental sensor packages to complete the ecosystem sensor suite. The mooring construction and instrumentation are described in detail, including introduction to the advances in sensor technologies that enable such deployments. Year one data recovery summaries and plots are provided to demonstrate the capabilities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jens Korsgaard

The main conclusions from the work carried out under this contract are: An ordinary seafarer can learn by training on a simulator, to moor large tanker vessels to the Hydrostatic Mooring, safely and quickly, in all weather conditions up to storms generating waves with a significant wave height of 8 m. Complete conceptual design of the Hydrostatic Mooring buoy was carried out which proved that the buoy could be constructed entirely from commercially available standard components and materials. The design is robust, and damage resistant. The mooring tests had a 100% success rate from the point of view of themore » buoy being securely attached and moored to the vessel following every mooring attempt. The tests had an 80% success rate from the point of view of the buoy being adequately centered such that petroleum transfer equipment on the vessel could be attached to the corresponding equipment on the buoy. The results given in Table 3-2 of the mooring tests show a consistently improving performance from test to test by the Captain that performed the mooring operations. This is not surprising, in view of the fact that the Captain had only three days of training on the simulator prior to conducting the tests, that the maneuvering required is non-standard, and the test program itself lasted four days. One conclusion of the test performance is that the Captain was not fully trained at the initiation of the test. It may therefore be concluded that a thoroughly trained navigator would probably be able to make the mooring such that the fluid transfer equipment can be connected with reliability in excess of 90%. Considering that the typical standard buoy has enough power aboard to make eight mooring attempts, this implies that the probability that the mooring attempt should fail because of the inability to connect the fluid transfer equipment is of the order of 10{sup {minus}8}. It may therefore be concluded that the mooring operation between a Hydrostatic Mooring and a large tanker vessel can be carried out with near absolute reliability in all sea states up to a sea state where the significant wave height is 8 m.« less

48 CFR 252.225-7019 - Restriction on acquisition of anchor and mooring chain.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of anchor and mooring chain. 252.225-7019 Section 252.225-7019 Federal Acquisition Regulations System... and mooring chain. As prescribed in 225.7007-3, use the following clause: Restriction on Acquisition of Anchor and Mooring Chain (DEC 2009)) (a) Definition. “Component,” as used in this clause, means an...

48 CFR 252.225-7019 - Restriction on acquisition of anchor and mooring chain.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of anchor and mooring chain. 252.225-7019 Section 252.225-7019 Federal Acquisition Regulations System... and mooring chain. As prescribed in 225.7007-3, use the following clause: Restriction on Acquisition of Anchor and Mooring Chain (DEC 2009)) (a) Definition. “Component,” as used in this clause, means an...

48 CFR 252.225-7019 - Restriction on acquisition of anchor and mooring chain.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of anchor and mooring chain. 252.225-7019 Section 252.225-7019 Federal Acquisition Regulations System... and mooring chain. As prescribed in 225.7007-3, use the following clause: Restriction on Acquisition of Anchor and Mooring Chain (DEC 2009)) (a) Definition. “Component,” as used in this clause, means an...

48 CFR 252.225-7019 - Restriction on acquisition of anchor and mooring chain.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of anchor and mooring chain. 252.225-7019 Section 252.225-7019 Federal Acquisition Regulations System... and mooring chain. As prescribed in 225.7007-3, use the following clause: Restriction on Acquisition of Anchor and Mooring Chain (DEC 2009)) (a) Definition. “Component,” as used in this clause, means an...

48 CFR 252.225-7019 - Restriction on acquisition of anchor and mooring chain.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of anchor and mooring chain. 252.225-7019 Section 252.225-7019 Federal Acquisition Regulations System... and mooring chain. As prescribed in 225.7007-3, use the following clause: Restriction on Acquisition of Anchor and Mooring Chain (DEC 2009)) (a) Definition. “Component,” as used in this clause, means an...

Study of ground handling characteristics of a maritime patrol airship

NASA Technical Reports Server (NTRS)

1981-01-01

Mooring concepts appropriate for maritime patrol airship (MPA) vehicles are investigated. The evolution of ground handling systems and procedures for all airship types is reviewed to ensure that appropriate consideration is given to past experiences. A tri-rotor maritime patrol airship is identified and described. Wind loads on a moored airship and the effects of these loads on vehicle design are analyzed. Several mooring concepts are assessed with respect to the airship design, wind loads, and mooring site considerations. Basing requirements and applicability of expeditionary mooring also are addressed.

Author Correction: Floats with bio-optical sensors reveal what processes trigger the North Atlantic bloom.

PubMed

Mignot, A; Ferrari, R; Claustre, H

2018-05-04

In the original version of this Article, the data accession https://doi.org/10.17882/42182 was omitted from the Data Availability statement.In the first paragraph of the Methods subsection entitled 'Float data processing', the WET Labs ECO-triplet fluorometer was incorrectly referred to as 'WETLabs ECO PUK'. In the final paragraph of this subsection, the WET Labs ECO-series fluorometer was incorrectly referred to as 'WETLabs 413 ECO-series'.In the Methods subsection 'Float estimates of phytoplankton carbon biomass', the average particulate organic carbon-bbp ratio of 37,537 mgC m -2 was incorrectly given as 37,357 mgC m -2 .In the second paragraph of the Methods subsection 'Float estimates of population division rates', the symbol for Celsius (C) was omitted from the phrase 'a 10°C increase in temperature'.These errors have now been corrected in the PDF and HTML versions of the Article.

Is Survival Time After Hemorrhage a Heritable, Quantitative Trait?: An Initial Assessment

DTIC Science & Technology

2008-06-01

The epidemiology of traumatic death. A population-based analysis. Arch Surg 128:571Y575, 1993. 5. Sauaia A, Moore FA, Moore EE, Moser KS, Brennan R...therapeutic goals and early warning of death. Arch Surg 106:630Y636, 1973. 752 SHOCK VOL. 29, NO. 6 KLEMCKE ET AL. Copyright @ 200 by the Shock...Hemorrhagic shock in rats. Measured blood volumes as the basis for the extent of hemorrhage. Arch Surg 99:484Y488, 1969. 19. Nose H, Morita M, Yawata T

Real-Time Environmental Artic Monitoring (R-TEAM).

DTIC Science & Technology

1987-11-01

critical points of the mooring. Tension, tilt, pressure and temperature data are recorded on solid state memory for the duration of the deployment. Two...To iUe Tna£ LA6aksIIorZ. Um DESCaiPTiow r oj.t.TAK 2ALUMINUM PIPE -ob.I’ -WALL. 5e1 . Sm IVI IlSdh7 Z BOT’TOM END CAPME G,15473 (5 2 R.OD 3__ MX 306 as...described in Reference 2. Each instrument, located at a critical point of the mooring, measures and records in solid state memory tension, tilt, temperature

[MODIS Investigation

NASA Technical Reports Server (NTRS)

Abbott, Mark R.

1998-01-01

The objectives of the last six months were: Continue analysis of Hawaii Ocean Time-series (HOT) bio-optical mooring data, Recover instrumentation from JGOFS cruises in the Southern Ocean and analyze data Maintain documentation of MOCEAN algorithms and software for use by MOCEAN and GLI teams Continue chemostat experiments on the relationship of fluorescence quantum yield to environmental factors. Continue to develop and expand browser-based information system for in situ bio-optical data Work Analysis of Field Data from Hawaii We are continuing to analyze bio-optical data collected at the Hawaii Ocean Time Series mooring. The HOT bio-optical mooring was recovered in May 1998. After retrieving the data, the sensor package was serviced and redeployed. We now have over 18 months of data. These are being analyzed as part of a larger study of mesoscale processes at this JGOFS time series site. We have had some failures in the data logger which have affected the fluorescence channels. These are being repaired. We also had an instrument housing failure, and minor modifications have been made to avoid subsequent problems. In addition, Ricardo Letelier is funded as part of the SeaWiFS calibrator/validation effort (through a subcontract from the University of Hawaii, Dr. John Porter), and he is collecting bio-optical and fluorescence data as part of the HOT activity.

Implementation of Distributed Services for a Deep Sea Moored Instrument Network

NASA Astrophysics Data System (ADS)

Oreilly, T. C.; Headley, K. L.; Risi, M.; Davis, D.; Edgington, D. R.; Salamy, K. A.; Chaffey, M.

2004-12-01

The Monterey Ocean Observing System (MOOS) is a moored observatory network consisting of interconnected instrument nodes on the sea surface, midwater, and deep sea floor. We describe Software Infrastructure and Applications for MOOS ("SIAM"), which implement the management, control, and data acquisition infrastructure for the moored observatory. Links in the MOOS network include fiber-optic and 10-BaseT copper connections between the at-sea nodes. A Globalstar satellite transceiver or 900 MHz Freewave terrestrial line-of-sight RF modem provides the link to shore. All of these links support Internet protocols, providing TCP/IP connectivity throughout a system that extends from shore to sensor nodes at the air-sea interface, through the oceanic water column to a benthic network of sensor nodes extending across the deep sea floor. Exploiting this TCP/IP infrastructure as well as capabilities provided by MBARI's MOOS mooring controller, we use powerful Internet software technologies to implement a distributed management, control and data acquisition system for the moored observatory. The system design meets the demanding functional requirements specified for MOOS. Nodes and their instruments are represented by Java RMI "services" having well defined software interfaces. Clients anywhere on the network can interact with any node or instrument through its corresponding service. A client may be on the same node as the service, may be on another node, or may reside on shore. Clients may be human, e.g. when a scientist on shore accesses a deployed instrument in real-time through a user interface. Clients may also be software components that interact autonomously with instruments and nodes, e.g. for purposes such as system resource management or autonomous detection and response to scientifically interesting events. All electrical power to the moored network is provided by solar and wind energy, and the RF shore-to-mooring links are intermittent and relatively low-bandwidth connections. Thus power and wireless bandwidth are limited resources that constrain our choice of service technologies and wireless access strategy. We describe and evaluate system performance in light of actual deployment of observatory elements in Monterey Bay, and discuss how the system can be developed further. We also consider management and control strategies for the cable-to-shore observatory known as MARS ("Monterey Accelerated Research System"). The MARS cable will provide high power and continuous high-bandwidth connectivity between seafloor instrument nodes and shore, thus removing key limitations of the moored observatory. Moreover MARS functional requirements may differ significantly from MOOS requirements. In light of these differences, we discuss how elements of our MOOS moored observatory architecture might be adapted to MARS.

An experimental study of the effect of mooring systems on the dynamics of a SPAR buoy-type floating offshore wind turbine

NASA Astrophysics Data System (ADS)

Hong, Sinpyo; Lee, Inwon; Park, Seong Hyeon; Lee, Cheolmin; Chun, Ho-Hwan; Lim, Hee Chang

2015-09-01

An experimental study of the effect of mooring systems on the dynamics of a SPAR buoy-type floating offshore wind turbine is presented. The effects of the Center of Gravity (COG), mooring line spring constant, and fair-lead location on the turbine's motion in response to regular waves are investigated. Experimental results show that for a typical mooring system of a SPAR buoy-type Floating Offshore Wind Turbine (FOWT), the effect of mooring systems on the dynamics of the turbine can be considered negligible. However, the pitch decreases notably as the COG increases. The COG and spring constant of the mooring line have a negligible effect on the fairlead displacement. Numerical simulation and sensitivity analysis show that the wind turbine motion and its sensitivity to changes in the mooring system and COG are very large near resonant frequencies. The test results can be used to validate numerical simulation tools for FOWTs.

Computing the Moore-Penrose Inverse of a Matrix with a Computer Algebra System

ERIC Educational Resources Information Center

Schmidt, Karsten

2008-01-01

In this paper "Derive" functions are provided for the computation of the Moore-Penrose inverse of a matrix, as well as for solving systems of linear equations by means of the Moore-Penrose inverse. Making it possible to compute the Moore-Penrose inverse easily with one of the most commonly used Computer Algebra Systems--and to have the blueprint…

Will Moores law be sufficient?

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeBenedictis, Erik P.

2004-07-01

It seems well understood that supercomputer simulation is an enabler for scientific discoveries, weapons, and other activities of value to society. It also seems widely believed that Moore's Law will make progressively more powerful supercomputers over time and thus enable more of these contributions. This paper seeks to add detail to these arguments, revealing them to be generally correct but not a smooth and effortless progression. This paper will review some key problems that can be solved with supercomputer simulation, showing that more powerful supercomputers will be useful up to a very high yet finite limit of around 1021 FLOPSmore » (1 Zettaflops) . The review will also show the basic nature of these extreme problems. This paper will review work by others showing that the theoretical maximum supercomputer power is very high indeed, but will explain how a straightforward extrapolation of Moore's Law will lead to technological maturity in a few decades. The power of a supercomputer at the maturity of Moore's Law will be very high by today's standards at 1016-1019 FLOPS (100 Petaflops to 10 Exaflops), depending on architecture, but distinctly below the level required for the most ambitious applications. Having established that Moore's Law will not be that last word in supercomputing, this paper will explore the nearer term issue of what a supercomputer will look like at maturity of Moore's Law. Our approach will quantify the maximum performance as permitted by the laws of physics for extension of current technology and then find a design that approaches this limit closely. We study a 'multi-architecture' for supercomputers that combines a microprocessor with other 'advanced' concepts and find it can reach the limits as well. This approach should be quite viable in the future because the microprocessor would provide compatibility with existing codes and programming styles while the 'advanced' features would provide a boost to the limits of performance.« less

Comparison of Sea-Air CO2 Flux Estimates Using Satellite-Based Versus Mooring Wind Speed Data

NASA Astrophysics Data System (ADS)

Sutton, A. J.; Sabine, C. L.; Feely, R. A.; Wanninkhof, R. H.

2016-12-01

The global ocean is a major sink of anthropogenic CO2, absorbing approximately 27% of CO2 emissions since the beginning of the industrial revolution. Any variation or change in the ocean CO2 sink has implications for future climate. Observations of sea-air CO2 flux have relied primarily on ship-based underway measurements of partial pressure of CO2 (pCO2) combined with satellite, model, or multi-platform wind products. Direct measurements of ΔpCO2 (seawater - air pCO2) and wind speed from moored platforms now allow for high-resolution CO2 flux time series. Here we present a comparison of CO2 flux calculated from moored ΔpCO2 measured on four moorings in different biomes of the Pacific Ocean in combination with: 1) Cross-Calibrated Multi-Platform (CCMP) winds or 2) wind speed measurements made on ocean reference moorings excluded from the CCMP dataset. Preliminary results show using CCMP winds overestimates CO2 flux on average by 5% at the Kuroshio Extension Observatory, Ocean Station Papa, WHOI Hawaii Ocean Timeseries Station, and Stratus. In general, CO2 flux seasonality follows patterns of seawater pCO2 and SST with periods of CO2 outgassing during summer and CO2 uptake during winter at these locations. Any offsets or seasonal biases in CCMP winds could impact global ocean sink estimates using this data product. Here we present patterns and trends between the two CO2 flux estimates and discuss the potential implications for tracking variability and change in global ocean CO2 uptake.

An in situ evaluation of TOPEX/Poseidon altimetric measurements versus meaurements made by moorings and inverted echo sounders for sea surface height

NASA Technical Reports Server (NTRS)

1994-01-01

The classical method of observing the sea surface height has been to make shipboard measurements of the vertical - density profile, and then calculating the surface height relative to a deeper reference surface. Two methods (a moored vertical string of instruments and an inverted echo sounder) were subsequently developed to obtain longer time in situ measurements. The first of these can be thought of as an extension of the discrete bottle hydrocast while the second integrates acoustically over the water column. One purpose of this note is to compare the result when coincidental observations are made by these two methods. This was done at two sites in the western tropical Pacific. Two inverted echo sounders were deployed alongside two enhanced TOGA-COARE moorings to be used in an in situ evaluation of TOPEX/Poseidon altimetric measurements of sea surface height. The mooring and inverted echo sounder data reproduced one another, at low frequency, with a correlation of 0.93 and 0.95 and the altimeter correlated with each of the above values ranging from 0.84 to 0.94. It is concluded that the altimetric measurements are statistically equivalent to the in situ measurements in the area of study.

A Robust Self-Alignment Method for Ship's Strapdown INS Under Mooring Conditions

PubMed Central

Sun, Feng; Lan, Haiyu; Yu, Chunyang; El-Sheimy, Naser; Zhou, Guangtao; Cao, Tong; Liu, Hang

2013-01-01

Strapdown inertial navigation systems (INS) need an alignment process to determine the initial attitude matrix between the body frame and the navigation frame. The conventional alignment process is to compute the initial attitude matrix using the gravity and Earth rotational rate measurements. However, under mooring conditions, the inertial measurement unit (IMU) employed in a ship's strapdown INS often suffers from both the intrinsic sensor noise components and the external disturbance components caused by the motions of the sea waves and wind waves, so a rapid and precise alignment of a ship's strapdown INS without any auxiliary information is hard to achieve. A robust solution is given in this paper to solve this problem. The inertial frame based alignment method is utilized to adapt the mooring condition, most of the periodical low-frequency external disturbance components could be removed by the mathematical integration and averaging characteristic of this method. A novel prefilter named hidden Markov model based Kalman filter (HMM-KF) is proposed to remove the relatively high-frequency error components. Different from the digital filters, the HMM-KF barely cause time-delay problem. The turntable, mooring and sea experiments favorably validate the rapidness and accuracy of the proposed self-alignment method and the good de-noising performance of HMM-KF. PMID:23799492

Turbulence Measurements from Compliant Moorings. Part II: Motion Correction

DOE PAGES

Kilcher, Levi F.; Thomson, Jim; Harding, Samuel; ...

2017-06-20

Acoustic Doppler velocimeters (ADVs) are a valuable tool for making high-precision measurements of turbulence, and moorings are a convenient and ubiquitous platform for making many kinds of measurements in the ocean. However, because of concerns that mooring motion can contaminate turbulence measurements and that acoustic Doppler profilers make middepth velocity measurements relatively easy, ADVs are not frequently deployed from moorings. This work demonstrates that inertial motion measurements can be used to reduce motion contamination from moored ADV velocity measurements. Three distinct mooring platforms were deployed in a tidal channel with inertial-motion-sensor-equipped ADVs. In each case, motion correction based on themore » inertial measurements reduces mooring motion contamination of velocity measurements. The spectra from these measurements are consistent with other measurements in tidal channels and have an f –5/3 slope at high frequencies - consistent with Kolmogorov's theory of isotropic turbulence. Motion correction also improves estimates of cross spectra and Reynolds stresses. A comparison of turbulence dissipation with flow speed and turbulence production indicates a bottom boundary layer production-dissipation balance during ebb and flood that is consistent with the strong tidal forcing at the site. Finally, these results indicate that inertial-motion-sensor-equipped ADVs are a valuable new tool for making high-precision turbulence measurements from moorings.« less

Modulated Chlorophyll "a" Fluorescence: A Tool for Teaching Photosynthesis

ERIC Educational Resources Information Center

Marques da Silva, Jorge; Bernardes da Silva, Anabela; Padua, Mario

2007-01-01

"In vivo" chlorophyll "a" fluorescence is a key technique in photosynthesis research. The recent release of a low cost, commercial, modulated fluorometer enables this powerful technology to be used in education. Modulated chlorophyll a fluorescence measurement "in vivo" is here proposed as a tool to demonstrate basic…

Water Quality and Plankton in the United States Nearshore Waters of Lake Huron

EPA Science Inventory

We conducted an intensive survey for the US nearshore of Lake Huron along a continuous segment (523 km) from Port Huron Michigan to Detour Passage. A depth contour of 20 m was towed with a CTD, fluorometer, transmissometer, and laser optical plankton counter (LOPC). The continu...

Marine Analysis Using a Rapid Scanning Multichannel Fluorometer.

DTIC Science & Technology

1985-04-30

investigated is provided in Table I. Listings Table I. Laboratory algae collection. Class Species Source Media Chlorophyceae Chlorella vulgaris 1 ASP 6...of spectral matching. Hit # Specie A B C Chlorella vulgaris 1 1 1 Dunaliela salina 1 1 1 Tetraselmis sp. 1 1 1 Spirulina major 1 1 1 Skeletonema

Preliminary study of ground handling characteristics of Buoyant Quad Rotor (BQR) vehicles

NASA Technical Reports Server (NTRS)

Browning, R. G. E.

1980-01-01

A preliminary investigation of mooring concepts appropriate for heavy lift buoyant quad rotor (BQR) vehicles was performed. A review of the evolution of ground handling systems and procedures for all airship types is presented to ensure that appropriate consideration is given to past experiences. Two buoyant quad rotor designs are identified and described. An analysis of wind loads on a moored airship and the effects of these loads on vehicle design is provided. Four mooring concepts are assessed with respect to the airship design, wind loads and mooring site considerations. Basing requirements and applicability of expeditionary mooring at various operational scenarios are addressed.

77 FR 24470 - Marine Mammals; Photography Permit File No. 17032

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-24

...Notice is hereby given that a permit has been issued to Shane Moore, Moore & Moore Films, Box 2980, 1203 Melody Creek Lane, Jackson, WY 83001 to conduct commercial/educational photography in Alaska.

Fatigue analysis of the bow structure of FPSO

NASA Astrophysics Data System (ADS)

Hu, Zhi-Qiang; Gao, Zhen; Gu, Yong-Ning

2003-06-01

The bow structure of FPSO moored by the single mooring system is rather complicated. There are many potential hot spots in connection parts of structures between the mooring support frame and the forecastle. Mooring forces, which are induced by wave excitation and transferred by the YOKE and the mooring support frame, may cause fatigue damage to the bow structure. Different from direct wave-induced-forces, the mooring force consists of wave frequency force (WF) and 2nd draft low frequency force (LF)[3], which are represented by two sets of short-term distribution respectively. Based on two sets of short-term distribution of mooring forces obtained by the model test, the fatigue damage of the bow structure of FPSO is analyzed, with emphasis on two points. One is the procedure and position selection for fatigue check, and the other is the application of new formulae for the calculation of accumulative fatigue damage caused by two sets of short-term distribution of hot spot stress range. From the results distinguished features of fatigue damage to the FPSO’s bow structure can be observed.

33 CFR 161.18 - Reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... call. H HOTEL Date, time and point of entry system Entry time expressed as in (B) and into the entry... KILO Date, time and point of exit from system Exit time expressed as in (B) and exit position expressed....; for a dredge or floating plant: configuration of pipeline, mooring configuration, number of assist...

77 FR 5743 - Special Anchorage Areas; Port of New York, NY

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-06

... inoperable bilge pumps, which could in turn result in vessels taking on water and sinking, disrupting other... areas in Sheepshead Bay, NY at all times. During times of high winds, vessels moored near the edge of...

Eddy Seeding in the Labrador Sea: a Submerged Autonomous Launching Platform (SALP) Application

NASA Astrophysics Data System (ADS)

Furey, Heather H.; Femke de Jong, M.; Bower, Amy S.

2013-04-01

A simplified Submerged Autonomous Launch Platform (SALP) was used to release profiling floats into warm-core Irminger Rings (IRs) in order to investigate their vertical structure and evolution in the Labrador Sea from September 2007 - September 2009. IRs are thought to play an important role in restratification after convection in the Labrador Sea. The SALP is designed to release surface drifters or subsurface floats serially from a traditional ocean mooring, using real-time ocean measurements as criteria for launch. The original prototype instrument used properties measured at multiple depths, with information relayed to the SALP controller via acoustic modems. In our application, two SALP carousels were attached at 500 meters onto a heavily-instrumented deep water mooring, in the path of recently-shed IRs off the west Greenland shelf. A release algorithm was designed to use temperature and pressure measured at the SALP depth only to release one or two APEX profiling drifters each time an IR passed the mooring, using limited historical observations to set release thresholds. Mechanically and electronically, the SALP worked well: out of eleven releases, there was only one malfunction when a float was caught in the cage after the burn-wire had triggered. However, getting floats trapped in eddies met with limited success due to problems with the release algorithm and float ballasting. Out of seven floats launched from the platform using oceanographic criteria, four were released during warm water events that were not related to passing IRs. Also, after float release, it took on average about 2.6 days for the APEX to adjust from its initial ballast depth, about 600 meters, to its park point of 300 meters, leaving the float below the trapped core of water in the IRs. The other mooring instruments (at depths of 100 to 3000 m), revealed that 12 IRs passed by the mooring in the 2-year monitoring period. With this independent information, we were able to assess and improve the release algorithm, still based on ocean conditions measured only at one depth. We found that much better performance could have been achieved with an algorithm that detected IRs based on a temperature difference from a long-term running mean rather than a fixed temperature threshold. This highlights the challenge of designing an appropriate release strategy with limited a priori information on the amplitude and time scales of the background variability.

Study on global performances and mooring-induced damping of a semi-submersible

NASA Astrophysics Data System (ADS)

Xiong, Ling-zhi; Yang, Jian-min; Lv, Hai-ning; Zhao, Wen-hua; Kou, Yu-feng

2016-10-01

The harsh environmental conditions bring strong nonlinearities to the hydrodynamic performances of the offshore floating platforms, which challenge the reliable prediction of the platform coupled with the mooring system. The present study investigates a typical semi-submersible under both the operational and the survival conditions through numerical and experimental methods. The motion responses, the mooring line tensions, and the wave loads on the longitudinal mid-section are investigated by both the fully non-linearly coupled numerical simulation and the physical experiment. Particularly, in the physical model test, the wave loads distributed on the semi-submersible's mid-section were measured by dividing the model into two parts, namely the port and the starboard parts, which were rigidly connected by three six-component force transducers. It is concluded that both the numerical and physical model can have good prediction of the semi-submersible's global responses. In addition, an improved numerical approach is proposed for the estimation of the mooring-induced damping, and is validated by both the experimental and the published results. The characteristics of the mooring-induced damping are further summarized in various sea states, including the operational and the survival environments. In order to obtain the better prediction of the system response in deep water, the mooring-induced damping of the truncated mooring lines applied in the physical experiment are compensated by comparing with those in full length. Furthermore, the upstream taut and the downstream slack mooring lines are classified and investigated to obtain the different mooring line damping performances in the comparative study.

Automated Support for Rapid Coordination of Joint UUV Operation

DTIC Science & Technology

2015-03-01

automata , dead-reckoning, static plan, nmtime plan, rapid deployment, GPS 17. SECURITY CLASSIFICATION OF REPORT Unclassified 18. SECURITY...STATE MACHINES, MOORE AUTOMATA ..........................................9 A. MOORE AUTOMATA ...9 B. UUV PLANS AS MOORE AUTOMATA ...................................................11 C. SAMPLING RATE

33 CFR 207.275 - McClellan-Kerr Arkansas River navigation system: use, administration, and navigation.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Vessels arriving at these markers or the mooring cells immediately upstream and downstream of the lock... mooring facilities at the junction of main stem and secondary channels are to provide temporary mooring...

Update on TAO moored ORG array

NASA Technical Reports Server (NTRS)

Freitag, H. Paul

1994-01-01

During the Coupled Ocean Atmosphere Response Experiment (COARE) six TAO moorings were equipped with optical rain gauges (ORG's). In late 1993 moorings deployed on the equator at 154E and 157.5E were recovered and not redeployed as they were augmentations to the TAO array for COARE only. In December 1993, four TAO moorings were equipped with ORG's: one each at 2N, 156E and 2S, 156E and ORG doublets on the equator at 0, 156E and 0, 165E. The 2N, 156E mooring has been lost. By the end of April all sites will have been serviced and six refurbished sensors will again be deployed in the same locations.

Accuracy in GPS/Acoustic positioning on a moored buoy moving around far from the optimal position

NASA Astrophysics Data System (ADS)

Imano, M.; Kido, M.; Ohta, Y.; Takahashi, N.; Fukuda, T.; Ochi, H.; Hino, R.

2015-12-01

For detecting the seafloor crustal deformation and Tsunami associated with large earthquakes in real-time, it is necessary to monitor them just above the possible source region. For this purpose, we have been dedicated in developing a real-time continuous observation system using a multi-purpose moored buoy. Sea-trials of the system have been carried out near the Nanakai trough in 2013 and 2014 (Takahashi et al., 2014). We especially focused on the GPS/Acoustic measurement (GPS/A) in the system for horizontal crustal movement. The GPS/A on a moored buoy has a critical drawback compared to the traditional ones, in which the data can be stacked over ranging points fixed at an optimal position. Accuracy in positioning with a single ranging from an arbitrary point is the subject to be improved in this study. Here, we report the positioning results in the buoy system using data in the 2014 sea-trial and demonstrate the improvement of the result. We also address the potential resolving power in the positioning using synthetic tests. The target GPS/A site consists of six seafloor transponders (PXPs) forming a small inner- and a large outer-triangles. The bottom of the moored cable is anchored nearly the center of the triangles. In the sea-trial, 11 times successive ranging was scheduled once a week, and we plotted positioning results from different buoy position. We confirmed that scatter in positioning using six PXPs simultaneously is ten times smaller than that using individual triangle separately. Next, we modified the definition of the PXP array geometry using data obtained in a campaign observation. Definition of an array geometry is insensitive as far as ranging is made in the same position, however, severely affects the positioning when ranging is made from various positions like the moored buoy. The modified PXP array is slightly smaller and 2m deeper than the original one. We found that the scatter of positioning results in the sea-trial is reduced from 4m to 1.7m with the modified geometry. Finally we produced a synthetic data with an artificial error in the array geometry and evaluated its effect on the positioning as a function of ranging point. This is interpreted with potential resolving power formulated in Kido (2007). In the presentation, we will show the results of synthetic test for systematic variation of the error condition.

Fluorescence dynamics of biological systems using synchrotron radiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gratton, E.; Mantulin, W.W.; Weber, G.

1996-09-01

A beamline for time-resolved fluorescence spectroscopy of biological systems is under construction at the Synchrotron Radiation Center. The fluorometer, operating in the frequency domain, will take advantage of the time structure of the synchrotron radiation light pulses to determine fluorescence lifetimes. Using frequency-domain techniques, the instrument can achieve an ultimate time resolution on the order of picoseconds. Preliminary experiments have shown that reducing the intensity of one of the fifteen electron bunches in the storage ring allows measurement of harmonic frequencies equivalent to the single-bunch mode. This mode of operation of the synchrotron significantly extends the range of lifetimes thatmore » can be measured. The wavelength range (encompassing the visible and ultraviolet), the range of measurable lifetimes, and the stability and reproducibility of the storage ring pulses should make this beamline a versatile tool for the investigation of the complex fluorescence decay of biological systems. {copyright} {ital 1996 American Institute of Physics.}« less

33 CFR 62.35 - Mooring buoys.

Code of Federal Regulations, 2013 CFR

2013-07-01

....35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION UNITED STATES AIDS TO NAVIGATION SYSTEM The U.S. Aids to Navigation System § 62.35 Mooring buoys. Mooring... identification and to avoid confusion with aids to navigation. ...

33 CFR 62.35 - Mooring buoys.

Code of Federal Regulations, 2014 CFR

2014-07-01

....35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION UNITED STATES AIDS TO NAVIGATION SYSTEM The U.S. Aids to Navigation System § 62.35 Mooring buoys. Mooring... identification and to avoid confusion with aids to navigation. ...

33 CFR 62.35 - Mooring buoys.

Code of Federal Regulations, 2011 CFR

2011-07-01

....35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION UNITED STATES AIDS TO NAVIGATION SYSTEM The U.S. Aids to Navigation System § 62.35 Mooring buoys. Mooring... identification and to avoid confusion with aids to navigation. ...

33 CFR 62.35 - Mooring buoys.

Code of Federal Regulations, 2012 CFR

2012-07-01

....35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION UNITED STATES AIDS TO NAVIGATION SYSTEM The U.S. Aids to Navigation System § 62.35 Mooring buoys. Mooring... identification and to avoid confusion with aids to navigation. ...

33 CFR 62.35 - Mooring buoys.

Code of Federal Regulations, 2010 CFR

2010-07-01

....35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION UNITED STATES AIDS TO NAVIGATION SYSTEM The U.S. Aids to Navigation System § 62.35 Mooring buoys. Mooring... identification and to avoid confusion with aids to navigation. ...

OCGen Module Mooring Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

McEntee, Jarlath

Ocean Renewable Power Company's OCGen Module Mooring Project provided an extensive research, design, development, testing and data collection effort and analysis conducted with respect to a positively buoyant, submerged MHK device secured to the seabed using a tensioned mooring system. Different analytic tools were evaluated for their utility in the design of submerged systems and their moorings. Deployment and testing of a prototype OCGen® system provided significant data related to mooring line loads and system attitude and station keeping. Mooring line loads were measured in situ and reported against flow speeds. The Project made a significant step in the developmentmore » of designs, methodologies and practices related to floating and mooring of marine hydrokinetic (MHK) devices. Importantly for Ocean Renewable Power Company, the Project provided a sound basis for advancing a technically and commercially viable OCGen® Power System. The OCGen® Power System is unique in the MHK industry and, in itself, offers distinct advantages of MHK devices that are secured to the seabed using fixed structural frames. Foremost among these advantages are capital and operating cost reductions and increased power extraction by allowing the device to be placed at the most energetic level of the water column.« less

A Portable Parallel Implementation of the U.S. Navy Layered Ocean Model

DTIC Science & Technology

1995-01-01

Wallcraft, PhD (I.C. 1981) Planning Systems Inc. & P. R. Moore, PhD (Camb. 1971) IC Dept. Math. DR Moore 1° Encontro de Metodos Numericos...Kendall Square, Hypercube, D R Moore 1 ° Encontro de Metodos Numericos para Equacöes de Derivadas Parciais A. J. Wallcraft IC Mathematics...chips: Chips Machine DEC Alpha CrayT3D/E SUN Sparc Fujitsu AP1000 Intel 860 Paragon D R Moore 1° Encontro de Metodos Numericos para Equacöes

Exploring Photosynthesis and Plant Stress Using Inexpensive Chlorophyll Fluorometers

ERIC Educational Resources Information Center

Cessna, Stephen; Demmig-Adams, Barbara; Adams, William W., III

2010-01-01

Mastering the concept of photosynthesis is of critical importance to learning plant physiology and its applications, but seems to be one of the more challenging concepts in biology. This teaching challenge is no doubt compounded by the complexity by which plants alter photosynthesis in different environments. Here we suggest the use of chlorophyll…

"Open-Box" Approach to Measuring Fluorescence Quenching Using an iPad Screen and Digital SLR Camera

ERIC Educational Resources Information Center

Koenig, Michael H.; Yi, Eun P.; Sandridge, Matthew J.; Mathew, Alexander S.; Demas, James N.

2015-01-01

Fluorescence quenching is an analytical technique and a common undergraduate laboratory exercise. Unfortunately, a typical quenching experiment requires the use of an expensive fluorometer that measures the relative fluorescence intensity of a single sample in a closed compartment unseen by the experimenter. To overcome these shortcomings, we…

Dynamical Characterization of a Low Oxygen Submesoscale Coherent Vortex in the Eastern North Atlantic Ocean

NASA Astrophysics Data System (ADS)

Pietri, A.; Karstensen, J.

2018-03-01

A submesoscale coherent vortex (SCV) with a low oxygen core is characterized from underwater glider and mooring observations from the eastern tropical North Atlantic, north of the Cape Verde Islands. The eddy crossed the mooring with its center and a 1 month time series of the SCV's hydrographic and upper 100 m currents structure was obtained. About 45 days after, and ˜100 km west, the SCV frontal zone was surveyed in high temporal and spatial resolution using an underwater glider. Satellite altimetry showed the SCV was formed about 7 months before at the Mauritanian coast. The SCV was located at 80-100 m depth, its diameter was ˜100 km and its maximum swirl velocity ˜0.4 m s-1. A Burger number of 0.2 and a vortex Rossby number 0.15 indicate a flat lens in geostrophic balance. Mooring and glider data show in general comparable dynamical and thermohaline structures, the glider in high spatial resolution, the mooring in high temporal resolution. Surface maps of chlorophyll concentration suggest high productivity inside and around the SCV. The low potential vorticity (PV) core of the SCV is surrounded by filamentary structures, sloping down at different angles from the mixed layer base and with typical width of 10-20 km and a vertical extent of 50-100 m.

Biostratigraphy and petrography of upper Paleozoic rocks of Sierra Las Pintas, northern Baja California

NASA Astrophysics Data System (ADS)

Navas-Parejo, Pilar; Lara-Peña, R. Aaron; Torres-Martínez, Miguel Angel; Martini, Michelangelo

2018-07-01

A transported crinoid fauna is herein described for the first time in the Paleozoic succession cropping out in the Sierra Las Pintas, northern Baja California, northwestern Mexico. The fossil association includes Heterostelechus texanus Moore and Jeffords, Preptopremnum laeve? Moore and Jeffords, and Mooreanteris perforatus Moore and Jeffords, which indicates a Middle Pennsylvanian-early Permian time-averaged age. The studied area corresponds with the northernmost outcrop of definitely late Paleozoic deep-water facies in northwestern Mexico and the southern United States. Petrographic analyses indicate that the studied metasandstones were primarily derived from high-grade metamorphic rocks and from a shallow-water platform environment dominated by crinoid meadows. These results allow the correlation of the studied metasedimentary rocks with the Carboniferous Rancho Nuevo Formation of the Sonora allochthon, which crops out in central Sonora. The Sonora allochthon includes an Early Ordovician-Late Pennsylvanian sedimentary succession that was deposited in the oceanic basin located south of the Laurentian craton. Therefore, upper Paleozoic metasedimentary rocks of the Sierra Las Pintas were deposited along the same continental margin of Laurentia as those rocks in the Sonora allochthon, and were mostly derived from metamorphic rocks of the continental craton and by the typical Carboniferous encrinites, which characterize the shallow-water rocks of central and northern Sonora.

77 FR 2037 - Marine Mammals; Photography Permit File No. 17032

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

...Notice is hereby given that Shane Moore, Moore & Moore Films, Box 2980, 1203 Melody Creek Lane, Jackson, WY 83001, has applied in due form for a permit to conduct commercial or educational photography on killer (Orcinus orca) and gray (Eschrichtius robustus) whales in Alaska.

14 CFR 101.7 - Hazardous operations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND GENERAL OPERATING RULES MOORED BALLOONS, KITES, AMATEUR ROCKETS AND UNMANNED FREE BALLOONS General § 101.7 Hazardous operations. (a) No person may operate any moored balloon, kite, amateur rocket, or... operating any moored balloon, kite, amateur rocket, or unmanned free balloon may allow an object to be...

14 CFR 101.7 - Hazardous operations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND GENERAL OPERATING RULES MOORED BALLOONS, KITES, AMATEUR ROCKETS AND UNMANNED FREE BALLOONS General § 101.7 Hazardous operations. (a) No person may operate any moored balloon, kite, amateur rocket, or... operating any moored balloon, kite, amateur rocket, or unmanned free balloon may allow an object to be...

14 CFR 101.7 - Hazardous operations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND GENERAL OPERATING RULES MOORED BALLOONS, KITES, AMATEUR ROCKETS AND UNMANNED FREE BALLOONS General § 101.7 Hazardous operations. (a) No person may operate any moored balloon, kite, amateur rocket, or... operating any moored balloon, kite, amateur rocket, or unmanned free balloon may allow an object to be...

14 CFR 101.7 - Hazardous operations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND GENERAL OPERATING RULES MOORED BALLOONS, KITES, AMATEUR ROCKETS AND UNMANNED FREE BALLOONS General § 101.7 Hazardous operations. (a) No person may operate any moored balloon, kite, amateur rocket, or... operating any moored balloon, kite, amateur rocket, or unmanned free balloon may allow an object to be...

14 CFR 101.7 - Hazardous operations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AND GENERAL OPERATING RULES MOORED BALLOONS, KITES, AMATEUR ROCKETS AND UNMANNED FREE BALLOONS General § 101.7 Hazardous operations. (a) No person may operate any moored balloon, kite, amateur rocket, or... operating any moored balloon, kite, amateur rocket, or unmanned free balloon may allow an object to be...

Variability and trends in surface seawater pCO2 and CO2 flux in the Pacific Ocean

NASA Astrophysics Data System (ADS)

Sutton, A. J.; Wanninkhof, R.; Sabine, C. L.; Feely, R. A.; Cronin, M. F.; Weller, R. A.

2017-06-01

Variability and change in the ocean sink of anthropogenic carbon dioxide (CO2) have implications for future climate and ocean acidification. Measurements of surface seawater CO2 partial pressure (pCO2) and wind speed from moored platforms are used to calculate high-resolution CO2 flux time series. Here we use the moored CO2 fluxes to examine variability and its drivers over a range of time scales at four locations in the Pacific Ocean. There are significant surface seawater pCO2, salinity, and wind speed trends in the North Pacific subtropical gyre, especially during winter and spring, which reduce CO2 uptake over the 10 year record of this study. Starting in late 2013, elevated seawater pCO2 values driven by warm anomalies cause this region to be a net annual CO2 source for the first time in the observational record, demonstrating how climate forcing can influence the timing of an ocean region shift from CO2 sink to source.

46 CFR 184.300 - Ground tackle and mooring lines.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Ground tackle and mooring lines. 184.300 Section 184.300 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Mooring and Towing Equipment § 184.300...

33 CFR 90.5 - Lights for moored vessels.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Lights for moored vessels. 90.5 Section 90.5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INLAND NAVIGATION RULES INLAND RULES: INTERPRETATIVE RULES § 90.5 Lights for moored vessels. A vessel at anchor...

33 CFR 82.5 - Lights for moored vessels.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Lights for moored vessels. 82.5 Section 82.5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES 72 COLREGS: INTERPRETATIVE RULES § 82.5 Lights for moored vessels. For the purposes of Rule...

33 CFR 90.5 - Lights for moored vessels.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Lights for moored vessels. 90.5 Section 90.5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INLAND NAVIGATION RULES INLAND RULES: INTERPRETATIVE RULES § 90.5 Lights for moored vessels. A vessel at anchor...

33 CFR 82.5 - Lights for moored vessels.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Lights for moored vessels. 82.5 Section 82.5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES 72 COLREGS: INTERPRETATIVE RULES § 82.5 Lights for moored vessels. For the purposes of Rule...

33 CFR 90.5 - Lights for moored vessels.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Lights for moored vessels. 90.5 Section 90.5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INLAND NAVIGATION RULES INLAND RULES: INTERPRETATIVE RULES § 90.5 Lights for moored vessels. A vessel at anchor...

33 CFR 90.5 - Lights for moored vessels.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Lights for moored vessels. 90.5 Section 90.5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INLAND NAVIGATION RULES INLAND RULES: INTERPRETATIVE RULES § 90.5 Lights for moored vessels. A vessel at anchor...

33 CFR 90.5 - Lights for moored vessels.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Lights for moored vessels. 90.5 Section 90.5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INLAND NAVIGATION RULES INLAND RULES: INTERPRETATIVE RULES § 90.5 Lights for moored vessels. A vessel at anchor...

33 CFR 82.5 - Lights for moored vessels.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Lights for moored vessels. 82.5 Section 82.5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES 72 COLREGS: INTERPRETATIVE RULES § 82.5 Lights for moored vessels. For the purposes of Rule...

33 CFR 82.5 - Lights for moored vessels.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Lights for moored vessels. 82.5 Section 82.5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES 72 COLREGS: INTERPRETATIVE RULES § 82.5 Lights for moored vessels. For the purposes of Rule...

33 CFR 82.5 - Lights for moored vessels.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Lights for moored vessels. 82.5 Section 82.5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES 72 COLREGS: INTERPRETATIVE RULES § 82.5 Lights for moored vessels. For the purposes of Rule...

Physical oceanographic data from the OTEC Punta Tuna, Puerto Rico Site, September 1979-June 1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frye, D.; Davison, A.; Leavitt, K.

1981-01-01

The first results of an oceanographic measurement program being conducted off the southeast corner of Puerto Rico are presented. The study site is a proposed OTEC site and is located about 20 km off Punta Tuna. The objectives of the measurement program are to document the physical oceanography of the site as related to the engineering and environmental factors involved in OTEC design and operation. Oceanographic measurements include: (1) a subsurface mooring instrumented with five current, temperature, and pressure recorders; and (2) quarterly hydrographic cruises to measure salinity, temperature, and depth profiles on a grid of 33 stations in themore » vicinity of the mooring site. The first cruise, conducted between 16 and 21 June 1980, included the initial mooring deployment and a CTD (conductivity, temperature, and depth) and XBT (expendable bathythermograph) survey. The CTD/XBT measurements are presented. Also included are results of in situ current, temperature, and pressure measurements made during two previous programs. In September 1979, Coastal Marine Research (CMR) deployed a mooring at approximately the same site as the present mooring. Results from three of these instruments are included. The Naval Underwater Systems Center deployed a mooring at this site in February 1979 and partial results from one instrument on this mooring are also presented. (WHK)« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kilcher, Levi F.; Thomson, Jim; Harding, Samuel

Acoustic Doppler velocimeters (ADVs) are a valuable tool for making high-precision measurements of turbulence, and moorings are a convenient and ubiquitous platform for making many kinds of measurements in the ocean. However, because of concerns that mooring motion can contaminate turbulence measurements and that acoustic Doppler profilers make middepth velocity measurements relatively easy, ADVs are not frequently deployed from moorings. This work demonstrates that inertial motion measurements can be used to reduce motion contamination from moored ADV velocity measurements. Three distinct mooring platforms were deployed in a tidal channel with inertial-motion-sensor-equipped ADVs. In each case, motion correction based on themore » inertial measurements reduces mooring motion contamination of velocity measurements. The spectra from these measurements are consistent with other measurements in tidal channels and have an f –5/3 slope at high frequencies - consistent with Kolmogorov's theory of isotropic turbulence. Motion correction also improves estimates of cross spectra and Reynolds stresses. A comparison of turbulence dissipation with flow speed and turbulence production indicates a bottom boundary layer production-dissipation balance during ebb and flood that is consistent with the strong tidal forcing at the site. Finally, these results indicate that inertial-motion-sensor-equipped ADVs are a valuable new tool for making high-precision turbulence measurements from moorings.« less

NDBC - NDBC Real-Time Data

Science.gov Websites

Subtropical Storm Alberto. NDBC Real-Time Data NDBC moored buoy, C-MAN, and drifting buoy data are available in real-time through selecting either: NDBC Station locator map: a series of regional maps which show : a tabular list of station identifiers. Real-time data are available for the last 45 days (at least

Ode to Moore

ERIC Educational Resources Information Center

Wilbert, Nancy Corrigan

2011-01-01

Best known for his monumental abstract sculptures of reclining figures, Henry Moore's forms are generally pierced or have a hollow space within them. Some say that these "organic undulating forms" are reminiscent of the landscape of his home in Yorkshire, England. Moore was a giant in the world of sculpture and his large cast bronzes and marble…

33 CFR 88.13 - Lights on moored barges.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Lights on moored barges. 88.13... NAVIGATION RULES ANNEX V: PILOT RULES § 88.13 Lights on moored barges. (a) The following barges shall display at night and if practicable in periods of restricted visibility the lights described in paragraph (b...

33 CFR 88.13 - Lights on moored barges.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Lights on moored barges. 88.13... NAVIGATION RULES ANNEX V: PILOT RULES § 88.13 Lights on moored barges. (a) The following barges shall display at night and if practicable in periods of restricted visibility the lights described in paragraph (b...

33 CFR 88.13 - Lights on moored barges.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Lights on moored barges. 88.13... NAVIGATION RULES ANNEX V: PILOT RULES § 88.13 Lights on moored barges. (a) The following barges shall display at night and if practicable in periods of restricted visibility the lights described in paragraph (b...

33 CFR 88.13 - Lights on moored barges.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Lights on moored barges. 88.13... NAVIGATION RULES ANNEX V: PILOT RULES § 88.13 Lights on moored barges. (a) The following barges shall display at night and if practicable in periods of restricted visibility the lights described in paragraph (b...

33 CFR 88.13 - Lights on moored barges.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Lights on moored barges. 88.13... NAVIGATION RULES ANNEX V: PILOT RULES § 88.13 Lights on moored barges. (a) The following barges shall display at night and if practicable in periods of restricted visibility the lights described in paragraph (b...

Improving the knowledge about dissolved oxygen and chlorophyll variability at ESTOC by using autonomous vehicles.

NASA Astrophysics Data System (ADS)

Cianca, A.; Caudet, E.; Vega, D.; Barrera, C.; Hernandez Brito, J.

2016-02-01

The European Station for Time Series in the Ocean, Canary Islands "ESTOC" is located in the Eastern Subtropical North Atlantic Gyre (29'10ºN, 15'30ºW). ESTOC started operations in 1994 based on a monthly ship-based sampling, in addition to hydrographic and sediment trap moorings. Since 2002, ESTOC is part of the European network for deep sea ocean observatories through several projects, among others ANIMATE (Atlantic Network of Interdisciplinary Moorings and Time-series for Europe), EuroSITES (European Ocean Observatory Network) and Fixed point Open Ocean Observatory network (FixO3). The main purpose of these projects was to improve the time-resolution of the biogeochemical measurements through moored biogeochemical sensors. Additionally, ESTOC is included in the Marine-Maritime observational network of the Macaronesian region, which is supported by the European overseas territories programs since 2009. This network aims to increase the quantity and quality of marine environmental observations. The goal is to understand phenomena which impact in the environment, and consequently at the socio-economy of the region to attempt their prediction. With this purpose, ESTOC has included the use of autonomous vehicles "glider" in order to increase the observational resolution and, by comparison with the parallel observational programs, to study the biogeochemical processes at different time scale resolutions. This study investigates the time variability of the dissolved oxygen and chlorophyll distributions in the water column focusing on the diel cycle, looking at the relevance of this variability in the already known seasonal distributions. Our interest is assessing net community production and remineralization rates through the use of oxygen variations, establishing the relationship between the DO anomalies values and those from the chlorophyll distribution in the water column.

Combined processing and mutual interpretation of radiometry and fluorometry from autonomous profiling Bio-Argo floats: 2. Colored dissolved organic matter absorption retrieval

NASA Astrophysics Data System (ADS)

Xing, Xiaogang; Morel, André; Claustre, Hervé; D'Ortenzio, Fabrizio; Poteau, Antoine

2012-04-01

Eight autonomous profiling "Bio-Argo" floats were deployed offshore during about 2 years (2008-2010) in Pacific, Atlantic, and Mediterranean zones. They were equipped with miniaturized bio-optical sensors, namely a radiometer measuring within the upper layer the downward irradiance at 412, 490, and 555 nm, and two fluorometers for detection of chlorophyll-a (Chla) and colored dissolved organic matter (CDOM; profiles from 400 m to surface). A first study dealt with the interpretation of the Chla fluorescence signal in terms of concentration, using for this purpose the diffuse attenuation coefficient for irradiance at 490 nm, Kd(490), taken as a proxy for the Chla absorption. The present study examines the possibility of similarly using the Kd(412) values combined with retrieved Chla profiles to convert the CDOM fluorometric qualitative information into a CDOM absorption coefficient (ay). The rationale is to take advantage of the fact that Kd is more sensitive to CDOM presence at 412 nm than at 490 nm. A validation of this method is tested through its application to field data, collected from a ship over a wide range of trophic conditions (Biogeochemistry and Optics South Pacific Experiment (BIOSOPE) cruise); these data include both in situ fluorescence profiles and CDOM absorption as measured on discrete samples. In addition, near-surface ay values retrieved from the floats agree with those derivable from ocean color imagery (Moderate Resolution Imaging Spectroradiometer (MODIS-A)). The low sensitivity of commercially available CDOM fluorometers presently raises difficulties when applying this technique to open ocean waters. It was nevertheless possible to derive from the floats records meaningful time series of CDOM vertical distribution.

DNA detection using water-soluble conjugated polymers and peptide nucleic acid probes

PubMed Central

Gaylord, Brent S.; Heeger, Alan J.; Bazan, Guillermo C.

2002-01-01

The light-harvesting properties of cationic conjugated polymers are used to sensitize the emission of a dye on a specific peptide nucleic acid (PNA) sequence for the purpose of homogeneous, “real-time” DNA detection. Signal transduction is controlled by hybridization of the neutral PNA probe and the negative DNA target. Electrostatic interactions bring the hybrid complex and cationic polymer within distances required for Förster energy transfer. Conjugated polymer excitation provides fluorescein emission >25 times higher than that obtained by exciting the dye, allowing detection of target DNA at concentrations of 10 pM with a standard fluorometer. A simple and highly sensitive assay with optical amplification that uses the improved hybridization behavior of PNA/DNA complexes is thus demonstrated. PMID:12167673

The Monterey Ocean Observing System Development Program

NASA Astrophysics Data System (ADS)

Chaffey, M.; Graybeal, J. B.; O'Reilly, T.; Ryan, J.

2004-12-01

The Monterey Bay Aquarium Research Institute (MBARI) has a major development program underway to design, build, test and apply technology suitable to deep ocean observatories. The Monterey Ocean Observing System (MOOS) program is designed to form a large-scale instrument network that provides generic interfaces, intelligent instrument support, data archiving and near-real-time interaction for observatory experiments. The MOOS mooring system is designed as a portable surface mooring based seafloor observatory that provides data and power connections to both seafloor and ocean surface instruments through a specialty anchor cable. The surface mooring collects solar and wind energy for powering instruments and transmits data to shore-side researchers using a satellite communications modem. The use of a high modulus anchor cable to reach seafloor instrument networks is a high-risk development effort that is critical for the overall success of the portable observatory concept. An aggressive field test program off the California coast is underway to improve anchor cable constructions as well as end-to-end test overall system design. The overall MOOS observatory systems view is presented and the results of our field tests completed to date are summarized.

33 CFR 165.T14-204 - Safety Zone; fixed mooring balls, south of Barbers Pt Harbor Channel, Oahu, Hawaii.

Code of Federal Regulations, 2010 CFR

2010-07-01

... contained within a 400-yard radius (366-meter) radius around position 21°18′35.00″ N., 158°07′33.00″ W. This... mooring balls will be placed 133 yards (121 meters) in a circular design for preapproved vessel mooring...

The Librarian Lion: Constructing Children's Literature through Connections, Capital, and Criticism (1906-1941)

ERIC Educational Resources Information Center

Martens, Marianne

2013-01-01

While much has been written about the pioneering children's librarian Anne Carroll Moore, little has been written about her role as a "de facto" literary agent. As such, Moore was an innovator not only in children's librarianship, but also in the field of children's publishing. This paper analyzes Moore's letters at the Manuscripts and…

Mooring Operations for Thin-Ice Arctic Acoustic Window (THAAW) Project

DTIC Science & Technology

2015-05-20

Moore, S. E., Lee, C. M., Vigness -Raposa, K. J., Freitag, L., Arrott, M., Atakan, K., Beszczynska-Möller, A., Duda, T. F., Dushaw, B. D., Gascard, J...PUBLICATIONS AND PRESENTATIONS Mikhalevsky, P. N., Sagen, H., Worcester, P. F., Baggeroer, A. B., Orcutt, J., Moore, S. E., Lee, C. M., Vigness -Raposa, K. J

75 FR 6065 - Extension of Public Comment Period on the Draft Environmental Impact Statement for the Moore...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-05

... Environmental Impact Statement for the Moore Ranch In-Situ Recovery Project in Campbell County, WY; Supplement to the Generic Environmental Impact Statement for In-Situ Leach Uranium Milling Facilities AGENCY... Statement (Draft SEIS) for the Moore Ranch In-Situ Recovery (ISR) Project closes on February 1, 2010. The...

Prevalence of genetic thrombophilic polymorphisms in the Sri Lankan population--implications for association study design and clinical genetic testing services.

PubMed

Dissanayake, Vajira H W; Weerasekera, Lakshini Y; Gammulla, C Gayani; Jayasekara, Rohan W

2009-10-01

We investigated the prevalence of genotypes/alleles of single nucleotide polymorphisms (SNP) and haplotypes defined by them in three genes in which variations are associated with venous thromboembolism in 80 Sinhalese, 80 Sri Lankan Tamils and 80 Moors in the Sri Lankan population and compared the SNP data with that of other populations in Southern India and haplotype data with that of HapMap populations. The genes and polymorphisms investigated were Methylenetetrahydrofolate reductase (MTHFR) - 677C>T (rs1801133), 1298A>C (rs1801131), 1317T>C, 1793G>A (rs2274976); Factor V (F5) - 1691G>A (rs6025) and 4070A>G (rs1800595); and prothrombin (F2) - 20210G>A (rs1799963). The polymorphisms were genotyped using PCR/RFLP methods. The prevalence of the variant alleles of each polymorphism in the Sinhalese, Tamils, and Moors was MTHFR 677T: Sinhalese - 13%, Tamils - 9%, Moors - 9%. 1317T>C: Sinhalese - 0%; Tamils - 0%; Moors - 0%. 1793A: Sinhalese - 19%, Tamils - 19%, Moors - 19%. F5 1691A: Sinhalese - 2%, Tamils - 3%, Moors - 2%. 4070G: Sinhalese - 6%, Tamils - 5%, Moors - 8%. F2 20210A: Sinhalese - 0%, Tamils - 0%, Moors - 0%. The frequencies observed were similar to data from other South Indian populations; the haplotype data showed haplotypes unique to the Sri Lankan population when compared to HapMap populations. rs9651118 was identified as a SNP that splits the haplotypes harbouring the functionally significant 677T allele in the MTHFR gene. This data would be useful in planning genetic association studies in the Sri Lankan population and in deciding on which genetic variants should be tested in a clinical genetic testing service.

Creating values-based health care. An interview with ACMPE President Patty Brewster. Interview by Pamela L. Moore.

PubMed

Brewster, P L

1998-01-01

The new president of the American College of Medical Practice Executives (ACMPE), Patricia L. Brewster, FACMPE, regional director; Hughston Clinic, Atlanta, took time to talk to MGM Journal Managing Editor Pamela L. Moore, Ph.D., about her job, the ethics of medical practice management and the role of ACMPE. Brewster has 20 years experience in the medical marketplace. She formerly worked as the administrator at Phoenix: Orthopedic and Sports Medicine, Atlanta, and Orthopaedic Associates of Atlanta. She is also past-president of the MGMA Southern Section. Under her guidance, Hughston Clinic has from two to seven locations, covering a six county area in metropolitan Atlanta.

75 FR 38019 - Safety Zone; Fixed Mooring Balls, South of Barbers Pt. Harbor Channel, Oahu, HI

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-01

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2010-0457] RIN 1625-AA00 Safety Zone; Fixed Mooring Balls, South of Barbers Pt. Harbor Channel, Oahu, HI AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: Due to the placement of six fixed mooring balls in an...

33 CFR 401.12 - Minimum requirements-mooring lines and fairleads.

Code of Federal Regulations, 2010 CFR

2010-07-01

... forward and one mooring line shall lead astern from the break of the bow and shall be independently power... shall lead forward from the break of the bow and one line shall lead astern from the quarter and be... astern from the break of the bow through chocks to suitable mooring bitts on deck; (2) Vessels of more...

33 CFR 401.42 - Passing hand lines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... downbound vessel shall use its own hand lines, secured to the eye at the end of the mooring lines, by means... behind the splice of the eye; (3) At Iroquois Lock and Lock 8, Welland Canal, both upbound and downbound... to the eye of the No. 1 mooring wire by means of a bowline. (b) Mooring lines shall not be passed...

33 CFR 401.42 - Passing hand lines.

Code of Federal Regulations, 2011 CFR

2011-07-01

... downbound vessel shall use its own hand lines, secured to the eye at the end of the mooring lines, by means... behind the splice of the eye; (3) At Iroquois Lock and Lock 8, Welland Canal, both upbound and downbound... to the eye of the No. 1 mooring wire by means of a bowline. (b) Mooring lines shall not be passed...

Using the "Mary Tyler Moore Show" as a Feminist Teaching Tool

ERIC Educational Resources Information Center

Jule, Allyson

2010-01-01

This paper explores the use of "The Mary Tyler Moore Show" as a teaching tool used with a group of final-year undergraduate students who gathered together last academic year (2007-8) to explore Women in Leadership, as part of a Communications course. The research focus was: How can the use of "The Mary Tyler Moore Show" (a…

What is Lethe hyrania (Kollar, 1844) (Lepidoptera, Nymphalidae, Satyrinae)?

PubMed

Lang, Song-Yun; Lamas, Gerardo

2016-02-02

Known for a long time as "Lethe insana [sic] (Kollar, 1844)" (e.g. Fruhstorfer, 1911; D'Abrera, 1985), Lethe hyrania (Kollar, 1844) is a common, sexually-dimorphic, satyrine butterfly, found in the Sino-Himalayan region. Kollar (1844) described simultaneously both Satyrus isana and S. hyrania, as separate but closely related species, from northwestern India. Kollar (1844) spelt the name of the former in two different ways, as isana in the text (pp. 448, 449, 585), and as jsana in the legend for plate 16. Westwood (1851) maintained isana and hyrania as separate species but transferred them to the genus Debis Doubleday, whereas both Butler (1868) and Kirby (1871) assigned them to the genus Lethe Hübner, synonymizing isana under L. rohria (Fabricius). Moore (1882) was the first author to regard isana and hyrania as conspecific, the former representing the female sex and the latter the male, though he misspelt isana as "isania". Acting as First Reviser, Article 24.2 of ICZN (1999), Moore (1882) gave precedence to hyrania, thus the valid name for the species is Lethe hyrania. Later, Marshall & Nicéville (1883), Nicéville (1886), Doherty (1886), Elwes (1888), and Moore (1892) followed Moore's (1882) opinion, though afterwards Mackinnon & Nicéville (1897) argued that isana had priority over hyrania, based on "page precedence", ignoring Moore's (1882) previous action. Bingham (1905) was the first author to introduce the incorrect subsequent spelling "insana" and, apparently following Mackinnon & Nicéville (1897), also gave precedence to "insana" over hyrania. Most subsequent authors followed Bingham's (1905) error, and used Lethe "insana" for this species (for instance, Fruhstorfer, 1911; Evans, 1923, 1927; Gaede, 1931; Talbot, [1949]; Lesse, 1957; D'Abrera, 1985, 1990; Bozano, 1999). Except for Bozano (1999), who listed both hyrania and "insana" as valid species, without further comment, the name hyrania has been forgotten for over a hundred years.

Anatomy of a turbidity current: Concentration and grain size structure of a deep-sea flow revealed by multiple-frequency acoustic profilers

NASA Astrophysics Data System (ADS)

Simmons, S.; Parsons, D. R.; Paull, C. K.; Barry, J.; Chaffey, M. R.; Gwiazda, R.; O'Reilly, T. C.; Maier, K. L.; Rosenberger, K. J.; Talling, P.; Xu, J.

2017-12-01

Turbidity currents are responsible for transporting large volumes of sediment to the deep ocean, yet remain poorly understood due to the limited number of field observations of these episodic, high energy events. As part of the Monterey Coordinated Canyon Experiment high resolution, sub-minute acoustic velocity and backscatter profiles were acquired with downward-looking acoustic Doppler current profilers (ADCPs) distributed along the canyon on moorings at depths ranging from 270 to 1,900 m over a period of 18 months. Additionally, three upward-looking ADCPs on different frequencies (300, 600 and 1200 kHz) profiled the water column above a seafloor instrument node (SIN) at 1850 m water depth. Traps on the moorings collected sediment carried by the flows at different heights above the seafloor and sediment cores were taken to determine the depositional record produced by the flows. Several sediment-laden turbidity flows were observed during the experiment, three of which ran out for more than 50 km to water depths of greater than 1,900 m and were observed on all of the moorings. Flow speeds of up to 6 m/s were observed and individual moorings, anchored by railroad wheels, moved up to 7.8 km down-canyon during these powerful events. We present results based on a novel analysis of the multiple-frequency acoustic data acquired by the ADCPs at the SIN integrated with grain size data from the sediment traps, close to the deepest mooring in the array where the flow thickened to the 70 m height of the ADCP above the bed. The analysis allows, for the first time, retrieval of the suspended sediment concentration and vertical distribution of grain size structure within a turbidity in spectacular detail. The details of the stratification and flow dynamics will be used to re-evaluate and discuss our existing models for these deep-sea flows.

Optical Constituents at the Mouth of the Columbia River: Variability and Signature in Remotely Sensed Reflectance

DTIC Science & Technology

2013-09-30

constructed at BIO, carried the new Machine Vision Floc Camera (MVFC), a Sequoia Scientific LISST 100x Type B, an RBR CTD, and two pressure-actuated...WetStar CDOM fluorometer, a Sequoia Scientific flow control switch, and a SeaBird 37 CTD. The flow-control switch allows the ac- 9 to collect 0.2-um

BIOSPACE/DYABOLIC October 2010 Field Program, Monterey Bay, California Data Report

DTIC Science & Technology

2011-07-20

AU Fluorometer. After first reading samples were acidified with three drops of 5% HCl (to destroy the Chlorophyll) allowing the measurement of...DBCBLFOEB CJ BB BND-)#DBE CME JC 57$%2$0=$2B EKGE JKLMCJN DBCBLMKBN CN JJ 57$%2$0=$2C ENJE JKLMBO DBCBLMKMM JE F JO 57$%2$0=$2J EFBN JKLMEKK DBCBLMKMF JC

Relationship between Chlorophyll a Concentration, Light Attenuation and Diving Depth of the Southern Elephant Seal Mirounga leonina

PubMed Central

Jaud, Thomas; Dragon, Anne-Cécile; Garcia, Jade Vacquie; Guinet, Christophe

2012-01-01

Recently, a number of Antarctic marine environmental studies have used oceanographic parameters collected from instrumented top predators for ecological and physical information. Phytoplankton concentration is generally quantified through active measurement of chlorophyll fluorescence. In this study, light absorption coefficient (K0.75) was used as an indicator of phytoplankton concentration. This measurement, easy to obtain and requiring low electric power, allows for assessing of the fine scale horizontal structuring of phytoplankton. As part of this study, Southern elephant seals (SES) were simultaneously equipped with a fluorometer and a light logger. Along the SES tracks, variations in K0.75 were strongly correlated with chlorophyll, a concentration measured by the fluorometer within the euphotic layer. With regards to SES foraging behaviour, bottom depth of the seal’s dive was highly dependent on light intensity at 150 m, indicating that the vertical distribution of SES’s prey such as myctophids is tightly related to light level. Therefore, change in phytoplankton concentration may not only have a direct effect on SES’s prey abundance but may also determine their vertical accessibility with likely consequences on SES foraging efficiency. PMID:23082166

Glider Observations of Internal Tide Packets on the Australian Northwest Shelf

NASA Astrophysics Data System (ADS)

Book, J. W.; Steinberg, C. R.; Brinkman, R. M.; Jones, N. L.; Lowe, R.; Ivey, G. N.; Pattiaratchi, C. B.; Rice, A. E.

2016-02-01

The rapid profiling capabilities (less than 10 minutes per profile in 100 m of water excluding surfacing times) of autonomous gliders were utilized to study the structure of non-linear internal tide packets on the Australian Northwest Shelf. A total of five gliders were deployed on the shelf from 11 February - 21 April 2012 with more than 2900 glider CTD profiles collected during the final three weeks of this time period when the internal tide activity was intense. In general the internal tide packets showed high degrees of non-linearity, for example in one case a glider observed a 62 m rise of the 28° isotherm over 2.25 hours in a shelf location of 90 meters water depth. In addition to the glider measurements, moored strings of CTD sensors were used to measure the internal tide packets at fixed positions and the results show that the wave packets vary significantly with respect to their structure and arrival times from one tidal period to the next. This fact complicates interpretation of the glider data as wave packet spatial evolution is non-stationary and cannot be simply recovered from repeat glider visits to the same location. Furthermore, the packets were found to move at speeds near or greater (e.g., 0.55 m/s) than the speed that the gliders were moving. Despite these challenges, the gliders offer the only resource that can measure the spatial structure of the wave packets beyond the scope of our limited mooring positions. Therefore, we have implemented methods such as time-augmented empirical orthogonal functions to combine these glider measurements with the fixed mooring measurements in order to better understand the spatial and temporal patterns of the wave packet evolution over the slope and shelf of this region.

How Does Variability in Aragonite Saturation Proxies Impact Our Estimates of the Intensity and Duration of Exposure to Aragonite Corrosive Conditions in a Coastal Upwelling System?

NASA Astrophysics Data System (ADS)

Abell, J. T.; Jacobsen, J.; Bjorkstedt, E.

2016-02-01

Determining aragonite saturation state (Ω) in seawater requires measurement of two parameters of the carbonate system: most commonly dissolved inorganic carbon (DIC) and total alkalinity (TA). The routine measurement of DIC and TA is not always possible on frequently repeated hydrographic lines or at moored-time series that collect hydrographic data at short time intervals. In such cases a proxy can be developed that relates the saturation state as derived from one time or infrequent DIC and TA measurements (Ωmeas) to more frequently measured parameters such as dissolved oxygen (DO) and temperature (Temp). These proxies are generally based on best-fit parameterizations that utilize references values of DO and Temp and adjust linear coefficients until the error between the proxy-derived saturation state (Ωproxy) and Ωmeas is minimized. Proxies have been used to infer Ω from moored hydrographic sensors and gliders which routinely collect DO and Temp data but do not include carbonate parameter measurements. Proxies can also calculate Ω in regional oceanographic models which do not explicitly include carbonate parameters. Here we examine the variability and accuracy of Ωproxy along a near-shore hydrographic line and a moored-time series stations at Trinidad Head, CA. The saturation state is determined using proxies from different coastal regions of the California Current Large Marine Ecosystem and from different years of sampling along the hydrographic line. We then calculate the variability and error associated with the use of different proxy coefficients, the sensitivity to reference values and the inclusion of additional variables. We demonstrate how this variability affects estimates of the intensity and duration of exposure to aragonite corrosive conditions on the near-shore shelf and in the water column.

Moore I postero-medial articular tibial fracture in alpine skiers: Surgical management and return to sports activity.

PubMed

Morin, Vincent; Pailhé, Régis; Sharma, Akash; Rouchy, René-Christopher; Cognault, Jérémy; Rubens-Duval, Brice; Saragaglia, Dominique

2016-06-01

Over the past 10 years, like many authors, we observed an increasing number of Moore I tibial plateau fractures related to alpine skiing for which the surgeon may face difficult choices regarding surgical approach and fixation means. Some authors have recently been suggesting a posterior approach associated to open reduction and osteosynthesis by a buttress plate. But in our knowledge there is no specific study on sports activity recovery after Moore I tibial fractures. The aim of this work was to assess sports activities and clinical outcomes after surgically treated Moore I tibial plateau fractures in an athletic population of skiers. We conducted a prospective case series between 2012 and 2014. This included fifteen patients aged 39.6±7 years whom presented with a Moore I tibial plateau fracture during a skiing accident. 12 cases (80%) presented with an associated tibial spine fracture. Treatment consisted of a standard antero-medial approach, with a medial para patellar arthrotomy to allow direct visualisation of articular reduction and spinal fixation. Two or three 6.5mm long cancellous bone screws were placed antero-posteriorly so as to ensure perfect compression of the fracture site. Radiological and functional results were assessed by an independent observer (Lysholm-Tegner, UCLA, KOOS scores) at the longest follow-up. Mean follow-up was 18.2±6 months (12-28). An immediate postoperative anatomical reduction was achieved in all cases and remained stable in time. At last follow-up Lysholm mean score was 85±14 points (59-100), UCLA score was 7.3±1.6 (4-10) and Tegner score was 4.6±1.3 (3-6). Mean KOOS score was 77±15 (54-97). 87% of patients had resumed their skiing activity and 93% were satisfied or very satisfied from their post-operative surgical outcome. We observed no pseudarthrosis or secondary varus displacement. In our series 87% of patients had resumed back to their sporting activities. Surgical management of Moore I tibial plateau fractures by isolated antero-posterior screwing provides excellent clinical and radiological results. The anteromedial incision has a dual advantage of anatomical reduction, tibial spine fixation (in 80% of our cases) and posteromedial fragment reduction. Copyright © 2016 Elsevier Ltd. All rights reserved.

On Doing Mathematics: Why We Should Not Encourage "Feeling," "Believing," or "Interpreting" Mathematics

ERIC Educational Resources Information Center

McLoughlin, M. Padraig M. M.

2012-01-01

P. R. Halmos recalled a conversation with R. L. Moore where Moore quoted a Chinese proverb. That proverb provides a summation of the justification of the methods employed in teaching students to do mathematics with a modified Moore method (MMM). It states, "I see, I forget; I hear, I remember; I do, I understand." In this paper we build…

The role of time in place attachment

Treesearch

David Smaldone

2007-01-01

Quantitative studies have found that the length of association is an important variable affecting place attachment (Kaltenborn 1998, Moore & Graefe 1994, Patterson & Williams 1991, Vorkinn & Riese 2001). These studies, however, have provided less insight into how and why time is involved in the process of forming place attachment, as well as the meanings...

Real time monitoring of urban surface water quality using a submersible, tryptophan-like fluorescence sensor

NASA Astrophysics Data System (ADS)

Khamis, Kieran; Bradley, Chris; Hannah, David; Stevens, Rob

2014-05-01

Due to the recent development of field-deployable optical sensor technology, continuous quantification and characterization of surface water dissolved organic matter (DOM) is possible now. Tryptophan-like (T1) fluorescence has the potential to be a particularly useful indicator of human influence on water quality as T1 peaks are associated with the input of labial organic carbon (e.g. sewage or farm waste) and its microbial breakdown. Hence, real-time recording of T1 fluorescence could be particular useful for monitoring waste water infrastructure, treatment efficiency and the identification of contamination events at higher temporal resolution than available hitherto. However, an understanding of sensor measurement repeatability/transferability and interaction with environmental parameters (e.g. turbidity) is required. Here, to address this practical knowledge gap, we present results from a rigorous test of a commercially available submersible tryptophan fluorometer (λex 285, λem 350). Sensor performance was first examined in the laboratory by incrementally increasing turbidity under controlled conditions. Further to this the sensor was integrated into a multi-parameter sonde and field tests were undertaken involving: (i) a spatial sampling campaign across a range of surface water sites in the West Midlands, UK; and (ii) collection of high resolution (sub-hourly) samples from an urban stream (Bournbrook, Birmingham, U.K). To determine the ability of the sensor to capture spatiotemporal dynamics of urban waters DOM was characterized for each site or discrete time step using Excitation Emission Matrix spectroscopy and PARAFAC. In both field and laboratory settings fluorescence intensity was attenuated at high turbidity due to suspended particles increasing absorption and light scattering. For the spatial survey, instrument readings were compared to those obtained by a laboratory grade fluorometer (Varian Cary Eclipse) and a strong, linear relationship was apparent (R2 > 0.7). Parallel water sampling and laboratory analysis identified the potential for correction of T1 fluorescence intensity based on turbidity readings. These findings highlight the potential utility of real time monitoring of T1 fluorescence for a range of environmental applications (e.g. monitoring sewage treatment processes and tracing polluting DOM sources). However, if high/variable suspended sediment loads are anticipated concurrent monitoring of turbidity is required for accurate readings.

The importance of deep, basinwide measurements in optimized Atlantic Meridional Overturning Circulation observing arrays

NASA Astrophysics Data System (ADS)

McCarthy, G. D.; Menary, M. B.; Mecking, J. V.; Moat, B. I.; Johns, W. E.; Andrews, M. B.; Rayner, D.; Smeed, D. A.

2017-03-01

The Atlantic Meridional Overturning Circulation (AMOC) is a key process in the global redistribution of heat. The AMOC is defined as the maximum of the overturning stream function, which typically occurs near 30°N in the North Atlantic. The RAPID mooring array has provided full-depth, basinwide, continuous estimates of this quantity since 2004. Motivated by both the need to deliver near real-time data and optimization of the array to reduce costs, we consider alternative configurations of the mooring array. Results suggest that the variability observed since 2004 could be reproduced by a single tall mooring on the western boundary and a mooring to 1500 m on the eastern boundary. We consider the potential future evolution of the AMOC in two generations of the Hadley Centre climate models and a suite of additional CMIP5 models. The modeling studies show that deep, basinwide measurements are essential to capture correctly the future decline of the AMOC. We conclude that, while a reduced array could be useful for estimates of the AMOC on subseasonal to decadal time scales as part of a near real-time data delivery system, extreme caution must be applied to avoid the potential misinterpretation or absence of a climate time scale AMOC decline that is a key motivation for the maintenance of these observations.