The research on visual industrial robot which adopts fuzzy PID control algorithm
NASA Astrophysics Data System (ADS)
Feng, Yifei; Lu, Guoping; Yue, Lulin; Jiang, Weifeng; Zhang, Ye
2017-03-01
The control system of six degrees of freedom visual industrial robot based on the control mode of multi-axis motion control cards and PC was researched. For the variable, non-linear characteristics of industrial robot`s servo system, adaptive fuzzy PID controller was adopted. It achieved better control effort. In the vision system, a CCD camera was used to acquire signals and send them to video processing card. After processing, PC controls the six joints` motion by motion control cards. By experiment, manipulator can operate with machine tool and vision system to realize the function of grasp, process and verify. It has influence on the manufacturing of the industrial robot.
Dynamic Measurement of Extra Long Stroke Cylinder in the Pneumatic System
NASA Astrophysics Data System (ADS)
Chang, Ho; Lan, Chou-wei; Chen, Liang-Chia
2006-10-01
This paper sets up the measure and control system of the dynamic characteristics of the extra long stroke cylinder. In the different types of the control conditions (e.g. different control law, operating pressure and direct control valves), using the measure and control system to measure the relation between the pressure and the velocity of the motion of the long stroke cylinder and to observe the stick slip phenomenon of the motion of the long stroke cylinder. In the innovate measurement system, two pressure sensors are set on the long stroke cylinder to measure the difference of the pressure between the inlet and the exhaust of the long stroke cylinder. In additions, a draw line encoder is set on the system to measure the position and the velocity of the motion of the long stroke cylinder. The measuring data of the measure system is transferred to the computer via A/D interface card and counter card, and Home-made program of Haptic Interface Device is used to control the system, saving the data of the motion of the long stroke cylinder. The system uses different types of direction control valve to control the motion of the long stroke cylinder and compares the difference of the motion of the long stroke cylinder. The results show that the motion of the cylinder that pauses in the middle of the cylinder stroke and causes the stick slip phenomenon is more violent than the stick slip phenomenon in other position. When the length of the pause time reaches the some range, the acceleration of the motion of the cylinder will be rised substantially. This paper not only focuses on the testing method of the dynamic characteristics of the motion of the long stroke cylinder, but also includes the analysis of the dynamic characteristics of the motion of the long stroke cylinder. It provides the data of the dynamic characteristics of the motion of the long stroke cylinder to improve and design the pneumatic system of the long stroke cylinder.
Zhu, Wenchao; Xu, Xiulin; Hu, Xiufang; An, Meijun
2017-06-01
This article presents the design of a motion control system for seated lower-limb rehabilitation training. The system is composed of lower limb exoskeleton, motor drive circuit, program of motion control, and so forth. The power of lower limbs joints is provided by six motors. The PCI-1240 motion control card is used as the core. This study achieved repetitive rotation training and gait trajectory training of lower limbs joints, of which the velocity, angle and time can be accurately controlled and adjusted. The experimental results showed that the motion control system can meet the requirement of repetitive rehabilitation training for patients with lower limb dysfunction. This article provides a new method to the research of motion control system in rehabilitation training, which can promote industrial automation technique to be used for health care, and conducive to the further study of the rehabilitation robot.
Design of a motion JPEG (M/JPEG) adapter card
NASA Astrophysics Data System (ADS)
Lee, D. H.; Sudharsanan, Subramania I.
1994-05-01
In this paper we describe a design of a high performance JPEG (Joint Photographic Experts Group) Micro Channel adapter card. The card, tested on a range of PS/2 platforms (models 50 to 95), can complete JPEG operations on a 640 by 240 pixel image within 1/60 of a second, thus enabling real-time capture and display of high quality digital video. The card accepts digital pixels for either a YUV 4:2:2 or an RGB 4:4:4 pixel bus and has been shown to handle up to 2.05 MBytes/second of compressed data. The compressed data is transmitted to a host memory area by Direct Memory Access operations. The card uses a single C-Cube's CL550 JPEG processor that complies with the baseline JPEG. We give broad descriptions of the hardware that controls the video interface, CL550, and the system interface. Some critical design points that enhance the overall performance of the M/JPEG systems are pointed out. The control of the adapter card is achieved by an interrupt driven software that runs under DOS. The software performs a variety of tasks that include change of color space (RGB or YUV), change of quantization and Huffman tables, odd and even field control and some diagnostic operations.
Open architecture CMM motion controller
NASA Astrophysics Data System (ADS)
Chang, David; Spence, Allan D.; Bigg, Steve; Heslip, Joe; Peterson, John
2001-12-01
Although initially the only Coordinate Measuring Machine (CMM) sensor available was a touch trigger probe, technological advances in sensors and computing have greatly increased the variety of available inspection sensors. Non-contact laser digitizers and analog scanning touch probes require very well tuned CMM motion control, as well as an extensible, open architecture interface. This paper describes the implementation of a retrofit CMM motion controller designed for open architecture interface to a variety of sensors. The controller is based on an Intel Pentium microcomputer and a Servo To Go motion interface electronics card. Motor amplifiers, safety, and additional interface electronics are housed in a separate enclosure. Host Signal Processing (HSP) is used for the motion control algorithm. Compared to the usual host plus DSP architecture, single CPU HSP simplifies integration with the various sensors, and implementation of software geometric error compensation. Motion control tuning is accomplished using a remote computer via 100BaseTX Ethernet. A Graphical User Interface (GUI) is used to enter geometric error compensation data, and to optimize the motion control tuning parameters. It is shown that this architecture achieves the required real time motion control response, yet is much easier to extend to additional sensors.
Optics derotator servo control system for SONG Telescope
NASA Astrophysics Data System (ADS)
Xu, Jin; Ren, Changzhi; Ye, Yu
2012-09-01
The Stellar Oscillations Network Group (SONG) is an initiative which aims at designing and building a groundbased network of 1m telescopes dedicated to the study of phenomena occurring in the time domain. Chinese standard node of SONG is an Alt-Az Telescope of F/37 with 1m diameter. Optics derotator control system of SONG telescope adopts the development model of "Industrial Computer + UMAC Motion Controller + Servo Motor".1 Industrial computer is the core processing part of the motion control, motion control card(UMAC) is in charge of the details on the motion control, Servo amplifier accepts the control commands from UMAC, and drives the servo motor. The position feedback information comes from the encoder, to form a closed loop control system. This paper describes in detail hardware design and software design for the optics derotator servo control system. In terms of hardware design, the principle, structure, and control algorithm of servo system based on optics derotator are analyzed and explored. In terms of software design, the paper proposes the architecture of the system software based on Object-Oriented Programming.
NASA Astrophysics Data System (ADS)
Varshney, Kapil; Chang, Song; Wang, Z. Jane
2013-05-01
Falling parallelograms exhibit coupled motion of autogyration and tumbling, similar to the motion of falling tulip seeds, unlike maple seeds which autogyrate but do not tumble, or rectangular cards which tumble but do not gyrate. This coupled tumbling and autogyrating motion are robust, when card parameters, such as aspect ratio, internal angle, and mass density, are varied. We measure the three-dimensional (3D) falling kinematics of the parallelograms and quantify their descending speed, azimuthal rotation, tumbling rotation, and cone angle in each falling. The cone angle is insensitive to the variation of the card parameters, and the card tumbling axis does not overlap with but is close to the diagonal axis. In addition to this connection to the dynamics of falling seeds, these trajectories provide an ideal set of data to analyze 3D aerodynamic force and torque at an intermediate range of Reynolds numbers, and the results will be useful for constructing 3D aerodynamic force and torque models. Tracking these free falling trajectories gives us a nonintrusive method for deducing instantaneous aerodynamic forces. We determine the 3D aerodynamic forces and torques based on Newton-Euler equations. The dynamical analysis reveals that, although the angle of attack changes dramatically during tumbling, the aerodynamic forces have a weak dependence on the angle of attack. The aerodynamic lift is dominated by the coupling of translational and rotational velocities. The aerodynamic torque has an unexpectedly large component perpendicular to the card. The analysis of the Euler equation suggests that this large torque is related to the deviation of the tumbling axis from the principle axis of the card.
Varshney, Kapil; Chang, Song; Wang, Z Jane
2013-05-01
Falling parallelograms exhibit coupled motion of autogyration and tumbling, similar to the motion of falling tulip seeds, unlike maple seeds which autogyrate but do not tumble, or rectangular cards which tumble but do not gyrate. This coupled tumbling and autogyrating motion are robust, when card parameters, such as aspect ratio, internal angle, and mass density, are varied. We measure the three-dimensional (3D) falling kinematics of the parallelograms and quantify their descending speed, azimuthal rotation, tumbling rotation, and cone angle in each falling. The cone angle is insensitive to the variation of the card parameters, and the card tumbling axis does not overlap with but is close to the diagonal axis. In addition to this connection to the dynamics of falling seeds, these trajectories provide an ideal set of data to analyze 3D aerodynamic force and torque at an intermediate range of Reynolds numbers, and the results will be useful for constructing 3D aerodynamic force and torque models. Tracking these free falling trajectories gives us a nonintrusive method for deducing instantaneous aerodynamic forces. We determine the 3D aerodynamic forces and torques based on Newton-Euler equations. The dynamical analysis reveals that, although the angle of attack changes dramatically during tumbling, the aerodynamic forces have a weak dependence on the angle of attack. The aerodynamic lift is dominated by the coupling of translational and rotational velocities. The aerodynamic torque has an unexpectedly large component perpendicular to the card. The analysis of the Euler equation suggests that this large torque is related to the deviation of the tumbling axis from the principle axis of the card.
Kinesthetic Transverse Wave Demonstration
NASA Astrophysics Data System (ADS)
Pantidos, Panagiotis; Patapis, Stamatis
2005-09-01
This is a variation on the String and Sticky Tape demonstration "The Wave Game," suggested by Ron Edge. A group of students stand side by side, each one holding a card chest high with both hands. The teacher cues the first student to begin raising and lowering his card. When he starts lowering his card, the next student begins to raise his. As succeeding students move their cards up and down, a wave such as that shown in the figure is produced. To facilitate the process, students' motions were synchronized with the ticks of a metronome (without such synchronization it was nearly impossible to generate a satisfactory wave). Our waves typically had a frequency of about 1 Hz and a wavelength of around 3 m. We videotaped the activity so that the students could analyze the motions. The (17-year-old) students had not received any prior instruction regarding wave motion and did not know beforehand the nature of the exercise they were about to carry out. During the activity they were asked what a transverse wave is. Most of them quickly realized, without teacher input, that while the wave propagated horizontally, the only motion of the transmitting medium (them) was vertical. They located the equilibrium points of the oscillations, the crests and troughs of the waves, and identified the wavelength. The teacher defined for them the period of the oscillations of the motion of a card to be the total time for one cycle. The students measured this time and then several asserted that it was the same as the wave period. Knowing the length of the waves and the number of waves per second, the next step can easily be to find the wave speed.
78 FR 39020 - Market Test on Gift Cards
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-28
... POSTAL REGULATORY COMMISSION [Docket No. MT2011-2; Order No. 1755] Market Test on Gift Cards... Service filing requesting a temporary extension of a market test on gift cards. This notice informs the... market test under 39 U.S.C. 3641(d).\\1\\ The market test is set to expire June 27, 2013. Motion at 1. The...
High speed multiphoton imaging
NASA Astrophysics Data System (ADS)
Li, Yongxiao; Brustle, Anne; Gautam, Vini; Cockburn, Ian; Gillespie, Cathy; Gaus, Katharina; Lee, Woei Ming
2016-12-01
Intravital multiphoton microscopy has emerged as a powerful technique to visualize cellular processes in-vivo. Real time processes revealed through live imaging provided many opportunities to capture cellular activities in living animals. The typical parameters that determine the performance of multiphoton microscopy are speed, field of view, 3D imaging and imaging depth; many of these are important to achieving data from in-vivo. Here, we provide a full exposition of the flexible polygon mirror based high speed laser scanning multiphoton imaging system, PCI-6110 card (National Instruments) and high speed analog frame grabber card (Matrox Solios eA/XA), which allows for rapid adjustments between frame rates i.e. 5 Hz to 50 Hz with 512 × 512 pixels. Furthermore, a motion correction algorithm is also used to mitigate motion artifacts. A customized control software called Pscan 1.0 is developed for the system. This is then followed by calibration of the imaging performance of the system and a series of quantitative in-vitro and in-vivo imaging in neuronal tissues and mice.
Massanes, Francesc; Cadennes, Marie; Brankov, Jovan G.
2012-01-01
In this paper we describe and evaluate a fast implementation of a classical block matching motion estimation algorithm for multiple Graphical Processing Units (GPUs) using the Compute Unified Device Architecture (CUDA) computing engine. The implemented block matching algorithm (BMA) uses summed absolute difference (SAD) error criterion and full grid search (FS) for finding optimal block displacement. In this evaluation we compared the execution time of a GPU and CPU implementation for images of various sizes, using integer and non-integer search grids. The results show that use of a GPU card can shorten computation time by a factor of 200 times for integer and 1000 times for a non-integer search grid. The additional speedup for non-integer search grid comes from the fact that GPU has built-in hardware for image interpolation. Further, when using multiple GPU cards, the presented evaluation shows the importance of the data splitting method across multiple cards, but an almost linear speedup with a number of cards is achievable. In addition we compared execution time of the proposed FS GPU implementation with two existing, highly optimized non-full grid search CPU based motion estimations methods, namely implementation of the Pyramidal Lucas Kanade Optical flow algorithm in OpenCV and Simplified Unsymmetrical multi-Hexagon search in H.264/AVC standard. In these comparisons, FS GPU implementation still showed modest improvement even though the computational complexity of FS GPU implementation is substantially higher than non-FS CPU implementation. We also demonstrated that for an image sequence of 720×480 pixels in resolution, commonly used in video surveillance, the proposed GPU implementation is sufficiently fast for real-time motion estimation at 30 frames-per-second using two NVIDIA C1060 Tesla GPU cards. PMID:22347787
Massanes, Francesc; Cadennes, Marie; Brankov, Jovan G
2011-07-01
In this paper we describe and evaluate a fast implementation of a classical block matching motion estimation algorithm for multiple Graphical Processing Units (GPUs) using the Compute Unified Device Architecture (CUDA) computing engine. The implemented block matching algorithm (BMA) uses summed absolute difference (SAD) error criterion and full grid search (FS) for finding optimal block displacement. In this evaluation we compared the execution time of a GPU and CPU implementation for images of various sizes, using integer and non-integer search grids.The results show that use of a GPU card can shorten computation time by a factor of 200 times for integer and 1000 times for a non-integer search grid. The additional speedup for non-integer search grid comes from the fact that GPU has built-in hardware for image interpolation. Further, when using multiple GPU cards, the presented evaluation shows the importance of the data splitting method across multiple cards, but an almost linear speedup with a number of cards is achievable.In addition we compared execution time of the proposed FS GPU implementation with two existing, highly optimized non-full grid search CPU based motion estimations methods, namely implementation of the Pyramidal Lucas Kanade Optical flow algorithm in OpenCV and Simplified Unsymmetrical multi-Hexagon search in H.264/AVC standard. In these comparisons, FS GPU implementation still showed modest improvement even though the computational complexity of FS GPU implementation is substantially higher than non-FS CPU implementation.We also demonstrated that for an image sequence of 720×480 pixels in resolution, commonly used in video surveillance, the proposed GPU implementation is sufficiently fast for real-time motion estimation at 30 frames-per-second using two NVIDIA C1060 Tesla GPU cards.
Chen, Xi; Xu, Liang; Qiu, Yong; Chen, Zhong-Hui; Zhou, Qing-Shuang; Li, Song; Sun, Xu
2018-06-01
Clinical and radiographic degenerative spondylolisthesis (CARDS) classification defines a distinct subset of patients with kyphotic angulation at the involved segment (type D). Research using CARDS classification to investigate motion characteristics at involved segments or patient-related outcomes (PROs) following surgical intervention is sparse. We investigated the relationship between CARDS type D spondylolisthesis and dynamic instability and PROs in type D versus non-type D spondylolisthesis. We reviewed consecutive patients who received transforaminal lumbar interbody fusion for L4-5 spondylolisthesis between 2009 and 2015. Patients were assigned into type D and non-type D groups. Translational motion was determined by upright lumbar lateral radiography with supine sagittal magnetic resonance imaging or flexion and extension radiography. Demographics, radiographic parameters, and PROs were evaluated. Type D and non-type D groups comprised 34 and 163 patients, respectively. Compared with non-type D, type D group was characterized by lordotic angulation loss and higher degree of olisthesis on upright radiographs and demonstrated higher translational motion on upright lumbar lateral radiography with supine sagittal magnetic resonance imaging analysis. After surgery, mean reduction rate was significantly higher in type D group; type D had less slippage, but differences in slip angle and disc height were not significant. Preoperative Oswestry Disability Index and visual analog scale for back pain scores were higher in type D group. Type D spondylolisthesis and dynamic instability were associated with achieving minimal clinically important differences in PROs. CARDS type D spondylolisthesis is a distinct subset associated with dynamic instability and worse PROs. Higher improvement in PROs can be achieved in CARDS type D spondylolisthesis after surgery. Copyright © 2018 Elsevier Inc. All rights reserved.
Images of Women in American Stereographs, 1870-1920.
ERIC Educational Resources Information Center
Schulz, Constance B.
American stereographs of the late 19th and early 20th centuries are discussed in the context of the Victorian stylized stereotype of women which they so graphically capture. Stereograph cards and early motion pictures from the Library of Congress were the major sources studied. Stereograph cards were as ubiquitous in their time as television is…
A New Type of Motor: Pneumatic Step Motor
Stoianovici, Dan; Patriciu, Alexandru; Petrisor, Doru; Mazilu, Dumitru; Kavoussi, Louis
2011-01-01
This paper presents a new type of pneumatic motor, a pneumatic step motor (PneuStep). Directional rotary motion of discrete displacement is achieved by sequentially pressurizing the three ports of the motor. Pulsed pressure waves are generated by a remote pneumatic distributor. The motor assembly includes a motor, gearhead, and incremental position encoder in a compact, central bore construction. A special electronic driver is used to control the new motor with electric stepper indexers and standard motion control cards. The motor accepts open-loop step operation as well as closed-loop control with position feedback from the enclosed sensor. A special control feature is implemented to adapt classic control algorithms to the new motor, and is experimentally validated. The speed performance of the motor degrades with the length of the pneumatic hoses between the distributor and motor. Experimental results are presented to reveal this behavior and set the expectation level. Nevertheless, the stepper achieves easily controllable precise motion unlike other pneumatic motors. The motor was designed to be compatible with magnetic resonance medical imaging equipment, for actuating an image-guided intervention robot, for medical applications. For this reason, the motors were entirely made of nonmagnetic and dielectric materials such as plastics, ceramics, and rubbers. Encoding was performed with fiber optics, so that the motors are electricity free, exclusively using pressure and light. PneuStep is readily applicable to other pneumatic or hydraulic precision-motion applications. PMID:21528106
List-mode PET image reconstruction for motion correction using the Intel XEON PHI co-processor
NASA Astrophysics Data System (ADS)
Ryder, W. J.; Angelis, G. I.; Bashar, R.; Gillam, J. E.; Fulton, R.; Meikle, S.
2014-03-01
List-mode image reconstruction with motion correction is computationally expensive, as it requires projection of hundreds of millions of rays through a 3D array. To decrease reconstruction time it is possible to use symmetric multiprocessing computers or graphics processing units. The former can have high financial costs, while the latter can require refactoring of algorithms. The Xeon Phi is a new co-processor card with a Many Integrated Core architecture that can run 4 multiple-instruction, multiple data threads per core with each thread having a 512-bit single instruction, multiple data vector register. Thus, it is possible to run in the region of 220 threads simultaneously. The aim of this study was to investigate whether the Xeon Phi co-processor card is a viable alternative to an x86 Linux server for accelerating List-mode PET image reconstruction for motion correction. An existing list-mode image reconstruction algorithm with motion correction was ported to run on the Xeon Phi coprocessor with the multi-threading implemented using pthreads. There were no differences between images reconstructed using the Phi co-processor card and images reconstructed using the same algorithm run on a Linux server. However, it was found that the reconstruction runtimes were 3 times greater for the Phi than the server. A new version of the image reconstruction algorithm was developed in C++ using OpenMP for mutli-threading and the Phi runtimes decreased to 1.67 times that of the host Linux server. Data transfer from the host to co-processor card was found to be a rate-limiting step; this needs to be carefully considered in order to maximize runtime speeds. When considering the purchase price of a Linux workstation with Xeon Phi co-processor card and top of the range Linux server, the former is a cost-effective computation resource for list-mode image reconstruction. A multi-Phi workstation could be a viable alternative to cluster computers at a lower cost for medical imaging applications.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lawrence, J.D.
1970-03-12
The Control Data 405 card reader, modified by the Control Data 3649 card read controller, is the primary mechanism for transferring information from a deck of punched cards into the CDC 6600 and CDC 7600 computers of the LLL Octopus system. The card reader operates at a maximum rate of 1200 cards per minute. A description of the card reader and its operation is given. A discussion of formates is included. (RWR)
Method and apparatus for electrospark deposition
Bailey, Jeffrey A.; Johnson, Roger N.; Park, Walter R.; Munley, John T.
2004-12-28
A method and apparatus for controlling electrospark deposition (ESD) comprises using electrical variable waveforms from the ESD process as a feedback parameter. The method comprises measuring a plurality of peak amplitudes from a series of electrical energy pulses delivered to an electrode tip. The maximum peak value from among the plurality of peak amplitudes correlates to the contact force between the electrode tip and a workpiece. The method further comprises comparing the maximum peak value to a set point to determine an offset and optimizing the contact force according to the value of the offset. The apparatus comprises an electrode tip connected to an electrical energy wave generator and an electrical signal sensor, which connects to a high-speed data acquisition card. An actuator provides relative motion between the electrode tip and a workpiece by receiving a feedback drive signal from a processor that is operably connected to the actuator and the high-speed data acquisition card.
[Integrated Development of Full-automatic Fluorescence Analyzer].
Zhang, Mei; Lin, Zhibo; Yuan, Peng; Yao, Zhifeng; Hu, Yueming
2015-10-01
In view of the fact that medical inspection equipment sold in the domestic market is mainly imported from abroad and very expensive, we developed a full-automatic fluorescence analyzer in our center, presented in this paper. The present paper introduces the hardware architecture design of FPGA/DSP motion controlling card+PC+ STM32 embedded micro processing unit, software system based on C# multi thread, design and implementation of double-unit communication in detail. By simplifying the hardware structure, selecting hardware legitimately and adopting control system software to object-oriented technology, we have improved the precision and velocity of the control system significantly. Finally, the performance test showed that the control system could meet the needs of automated fluorescence analyzer on the functionality, performance and cost.
NASA Technical Reports Server (NTRS)
1992-01-01
Ames Research Center research into virtual reality led to the development of the Convolvotron, a high speed digital audio processing system that delivers three-dimensional sound over headphones. It consists of a two-card set designed for use with a personal computer. The Convolvotron's primary application is presentation of 3D audio signals over headphones. Four independent sound sources are filtered with large time-varying filters that compensate for motion. The perceived location of the sound remains constant. Possible applications are in air traffic control towers or airplane cockpits, hearing and perception research and virtual reality development.
A geophone wireless sensor network for investigating glacier stick-slip motion
NASA Astrophysics Data System (ADS)
Martinez, Kirk; Hart, Jane K.; Basford, Philip J.; Bragg, Graeme M.; Ward, Tyler; Young, David S.
2017-08-01
We have developed an innovative passive borehole geophone system, as part of a wireless environmental sensor network to investigate glacier stick-slip motion. The new geophone nodes use an ARM Cortex-M3 processor with a low power design capable of running on battery power while embedded in the ice. Only data from seismic events was stored, held temporarily on a micro-SD card until they were retrieved by systems on the glacier surface which are connected to the internet. The sampling rates, detection and filtering levels were determined from a field trial using a standard commercial passive seismic system. The new system was installed on the Skalafellsjökull glacier in Iceland and provided encouraging results. The results showed that there was a relationship between surface melt water production and seismic event (ice quakes), and these occurred on a pattern related to the glacier surface melt-water controlled velocity changes (stick-slip motion). Three types of seismic events were identified, which were interpreted to reflect a pattern of till deformation (Type A), basal sliding (Type B) and hydraulic transience (Type C) associated with stick-slip motion.
Using a Computer Microphone Port to Study Circular Motion: Proposal of a Secondary School Experiment
ERIC Educational Resources Information Center
Soares, A. A.; Borcsik, F. S.
2016-01-01
In this work we present an inexpensive experiment proposal to study the kinematics of uniform circular motion in a secondary school. We used a PC sound card to connect a homemade simple sensor to a computer and used the free sound analysis software "Audacity" to record experimental data. We obtained quite good results even in comparison…
Self-control and credit-card use among college students.
Mansfield, Phylis M; Pinto, Mary Beth; Parente, Diane H
2003-06-01
This study assessed the relationship between self-control and credit-card use with a convenience sample of 165 traditional-age college students of whom 69 (42%) were women. Students' self-control was measured on Grasmick, et al.'s Self-control Scale, which has six subscales, one of which is Impulsivity. Comparisons were made between those students who paid their cards off each month, called convenience users, and those who carried a monthly balance forward on scores on total self-control and impulsivity, and number of credit cards possessed. A significant difference in self-control scores was found between these two groups and also for mean impulsivity scores. Significantly fewer credit cards were possessed by students who paid their cards off each month than by those who carried a monthly balance.
Airplane stability calculations with a card programmable pocket calculator
NASA Technical Reports Server (NTRS)
Sherman, W. L.
1978-01-01
Programs are presented for calculating airplane stability characteristics with a card programmable pocket calculator. These calculations include eigenvalues of the characteristic equations of lateral and longitudinal motion as well as stability parameters such as the time to damp to one-half amplitude or the damping ratio. The effects of wind shear are included. Background information and the equations programmed are given. The programs are written for the International System of Units, the dimensional form of the stability derivatives, and stability axes. In addition to programs for stability calculations, an unusual and short program is included for the Euler transformation of coordinates used in airplane motions. The programs have been written for a Hewlett Packard HP-67 calculator. However, the use of this calculator does not constitute an endorsement of the product by the National Aeronautics and Space Administration.
Franck, J.V.; Broadhead, P.S.; Skiff, E.W.
1959-07-14
A semiautomatic measuring projector particularly adapted for measurement of the coordinates of photographic images of particle tracks as prcduced in a bubble or cloud chamber is presented. A viewing screen aids the operator in selecting a particle track for measurement. After approximate manual alignment, an image scanning system coupled to a servo control provides automatic exact alignment of a track image with a reference point. The apparatus can follow along a track with a continuous motion while recording coordinate data at various selected points along the track. The coordinate data is recorded on punched cards for subsequent computer calculation of particle trajectory, momentum, etc.
Development of testing and training simulator for CEDMCS in KSNP
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nam, C. H.; Park, C. Y.; Nam, J. I.
2006-07-01
This paper presents a newly developed testing and training simulator (TTS) for automatically diagnosing and tuning the Control Element Drive Mechanism Control System (CEDMCS). TTS includes a new automatic, diagnostic, method for logic control cards and a new tuning method for phase synchronous pulse cards. In Korea Standard Nuclear Power Plants (KSNP). reactor trips occasionally occur due to a damaged logic control card in CEDMCS. However, there is no pre-diagnostic tester available to detect a damaged card in CEDMCS before it causes a reactor trip. Even after the reactor trip occurs, it is difficult to find the damaged card. Tomore » find the damaged card. ICT is usually used. ICT is an automated, computer-controlled testing system with measurement capabilities for testing active and passive components, or clusters of components, on printed circuit boards (PCB) and/or assemblies. However, ICT cannot detect a time dependent fault correctly and requires removal of the waterproof mating to perform the test. Therefore, the additional procedure of re-coating the PCB card is required after the test. TTS for CEDMCS is designed based on real plant conditions, both electrically and mechanically. Therefore, the operator can operate the Control Element Drive Mechanism (CEDM), which is mounted on the closure head of the reactor vessel (RV) using the soft control panel in ITS, which duplicates the Main Control Board (MCB) in the Main Control Room (MCR). However, during the generation of electric power in a nuclear power plant, it is difficult to operate the CEDM so a CEDM and Control Element Assembly (CEA) mock-up facility was developed to simulate a real plant CEDM. ITS was used for diagnosing and tuning control logic cards in CEDMCS in the Ulchin Nuclear Power Plant No. 4 during the plant overhaul period. It exhibited good performance in detecting the damaged cards and tuning the phase synchronous pulse cards. In addition, TTS was useful in training the CEDMCS operator by supplying detail signal information from the logic cards. (authors)« less
25 CFR 543.10 - What are the minimum internal control standards for card games?
Code of Federal Regulations, 2013 CFR
2013-04-01
... games? 543.10 Section 543.10 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN... control standards for card games? (a) Supervision. Supervision must be provided as needed during the card... personnel independent of the transaction or independent of the card games department; or (2) A dealer may...
25 CFR 543.10 - What are the minimum internal control standards for card games?
Code of Federal Regulations, 2014 CFR
2014-04-01
... games? 543.10 Section 543.10 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN... control standards for card games? (a) Supervision. Supervision must be provided as needed during the card... personnel independent of the transaction or independent of the card games department; or (2) A dealer may...
ERIC Educational Resources Information Center
Ellis, Albert
1986-01-01
Examines the emotional control card techniques developed by Sklare, Taylor, and Hyland (1985) to help clients more effectively use the rational-emotive imagery technique of Ellis (1974). Suggests a revision of the emotional control card technique. (NB)
[The continuous graphic presentation of interdepartmental results (author's transl)].
Berger, J; Hirsch, H
1976-10-01
The results of interdepartmental determinations can be clearly presented in the laboratory in two ways: 1. Entry on a test card, according to Shewhart, as used in internal quality control. 2. Entry on a test card, constructed on the principle of the Cusum test. By the latter procedure, systematic errors are detected sooner than with the usual test card. A graphic variant of the Cusum test is described; a V-mask is not required; the card superficially resembles the usual control card, and the calculation time is minimal. This method may also be used to advantage in internal quality control.
Lamas, Bruno; Michel, Marie-Laure; Waldschmitt, Nadine; Pham, Hang-Phuong; Zacharioudaki, Vassiliki; Dupraz, Louise; Delacre, Myriam; Natividad, Jane M; Costa, Gregory Da; Planchais, Julien; Sovran, Bruno; Bridonneau, Chantal; Six, Adrien; Langella, Philippe; Richard, Mathias L; Chamaillard, Mathias; Sokol, Harry
2017-08-08
In association with innate and adaptive immunity, the microbiota controls the colonisation resistance against intestinal pathogens. Caspase recruitment domain 9 ( CARD9 ), a key innate immunity gene, is required to shape a normal gut microbiota. Card9 -/- mice are more susceptible to the enteric mouse pathogen Citrobacter rodentium that mimics human infections with enteropathogenic and enterohaemorrhagic Escherichia coli . Here, we examined how CARD9 controls C. rodentium infection susceptibility through microbiota-dependent and microbiota-independent mechanisms. C. rodentium infection was assessed in conventional and germ-free (GF) wild-type (WT) and Card9 -/- mice. To explore the impact of Card9 -/- microbiota in infection susceptibility, GF WT mice were colonised with WT (WT→GF) or Card9 -/- ( Card9 -/- →GF) microbiota before C. rodentium infection. Microbiota composition was determined by 16S rDNA gene sequencing. Inflammation severity was determined by histology score and lipocalin level. Microbiota-host immune system interactions were assessed by quantitative PCR analysis. CARD9 controls pathogen virulence in a microbiota-independent manner by supporting a specific humoral response. Higher susceptibility to C. rodentium -induced colitis was observed in Card9 -/- →GF mice. The microbiota of Card9 -/- mice failed to outcompete the monosaccharide-consuming C. rodentium , worsening the infection severity. A polysaccharide-enriched diet counteracted the ecological advantage of C. rodentium and the defective pathogen-specific antibody response in Card9 -/- mice. CARD9 modulates the susceptibility to intestinal infection by controlling the pathogen virulence in a microbiota-dependent and microbiota-independent manner. Genetic susceptibility to intestinal pathogens can be overridden by diet intervention that restores humoural immunity and a competing microbiota. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Discovery Science: Newton All around You.
ERIC Educational Resources Information Center
Prigo, Robert; Humphrey, Gregg
1993-01-01
Presents activities for helping elementary students learn about Newton's third law of motion. Several activity cards demonstrate the concept of the law of action and reaction. The activities require only inexpensive materials that can be found around the house. (SM)
Jiang, Jin-Gang; Zhang, Yong-De
2013-03-01
The traditional, manual method of reproducing the dental arch form is prone to numerous random errors caused by human factors. The purpose of this study was to investigate the automatic acquisition of the dental arch and implement the motion planning and synchronized control of the dental arch generator of the multi-manipulator tooth-arrangement robot for use in full denture manufacture. First, the mathematical model of the dental arch generator was derived. Then the kinematics and control point position of the dental arch generator of the tooth arrangement robot were calculated and motion planning of each control point was analysed. A hardware control scheme is presented, based on the industrial personal computer and control card PC6401. In order to gain single-axis, precise control of the dental arch generator, we studied the control pulse realization of high-resolution timing. Real-time, closed-loop, synchronous control was applied to the dental arch generator. Experimental control of the dental arch generator and preliminary tooth arrangement were gained by using the multi-manipulator tooth-arrangement robotic system. The dental arch generator can automatically generate a dental arch to fit a patient according to the patient's arch parameters. Repeated positioning accuracy is 0.12 mm for the slipways that drive the dental arch generator. The maximum value of single-point error is 1.83 mm, while the arc-width direction (x axis) is -33.29 mm. A novel system that generates the dental arch has been developed. The traditional method of manually determining the dental arch may soon be replaced by a robot to assist in generating a more individual dental arch. The system can be used to fabricate full dentures and bend orthodontic wires. Copyright © 2012 John Wiley & Sons, Ltd.
A powerful enhancement to the DMAP alter capability
NASA Technical Reports Server (NTRS)
Pamidi, P. R.
1989-01-01
A powerful enhancement to the DMAP alter capability was developed and is available on all RPK-supported versions of COSMIC/NASTRAN. This enhancement involves the addition of two alter control cards, called INSERT and DELETE, to the Executive Control Deck. These cards allow for DMAP alters to be made by referencing DMAP statements by their module names rather than by their statement numbers in the rigid format DMAP sequence. This allows for increased user convenience and flexibility and makes alters more meaningful to the user. In addition, DMAP alter packages employing the alter control cards will be much less susceptible to future changes in rigid format DMAPs than alter packages employing the standard ALTER control cards. The usage of the cards is illustrated by examples.
Multi-axis control based on movement control cards in NC systems
NASA Astrophysics Data System (ADS)
Jiang, Tingbiao; Wei, Yunquan
2005-12-01
Today most movement control cards need special control software of topper computers and are only suitable for fixed-axis controls. Consequently, the number of axes which can be controlled is limited. Advanced manufacture technology develops at a very high speed, and that development brings forth. New requirements for movement control in mechanisms and electronics. This paper introduces products of the 5th generation of movement control cards, PMAC 2A-PC/104, made by the Delta Tau Company in the USA. Based on an analysis of PMAC 2A-PC/104, this paper first describes two aspects relevant to the hardware structure of movement control cards and the interrelated software of the topper computers. Then, two methods are presented for solving these problems. The first method is to set limit switches on the movement control cards; all of them can be used to control each moving axis. The second method is to program applied software with existing programming language (for example, VC ++, Visual Basic, Delphi, and so forth). This program is much easier to operate and expand by its users. By using a limit switch, users can choose different axes in movement control cards. Also, users can change parts of the parameters in the control software of topper computers to realize different control axes. Combining these 2 methods proves to be convenient for realizing multi-axis control in numerical control systems.
NASA Technical Reports Server (NTRS)
Book, W. J.
1974-01-01
The interactions of control system and distributed flexible structural dynamics is explored for mechanical arms. A modeling process using 4 x 4 transfer matrices is described which permits the closed loop response of many current arm configurations to be evaluated. Root locus, frequency response, modal shapes, and time impulse response have all been obtained from the digital computer implementation of this model, which is oriented to arm design and allows for easy variation of the arm configuration through data cards. The model corresponds with experimentally observed natural frequencies with an average error of less than 5% in the first three flexible modes in the seven cases considered. The model was used to explore the limits imposed by structural flexibility on a nondimensionalized two link arm with one and two joints for planar motion.
Smart cards: a specific application in the hospital.
Güler, I; Zengin, R M; Sönmez, M
1998-12-01
Computers have the ability to process and access tremendous amounts of information in our daily lives. But, now, individuals have this ability by carrying a smart card in their own wallets. These cards provide us the versatility, power, and security of computers. This study begins with a short description of smart cards and their advantages. Then, an electronic circuit that is designed for healthcare application in hospitals is introduced. This circuit functions as a smart card holder identifier, access controller for hospital doors and also can be used as a smart card reader/writer. Design steps of this electronic circuit, operation principles, serial communication with P.C., and the software are examined. Finally a complete access control network for hospital doors that functions with smart cards is discussed.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 38-MOTOR EQUIPMENT MANAGEMENT 38.8-Standard Form 149, U.S. Government National Credit Card § 109-38... the administrative control of fleet credit cards. Administrative control shall include, as a minimum: (1) A reconciliation of on-hand credit cards with the inventory list provided by GSA, (2) Providing...
Code of Federal Regulations, 2014 CFR
2014-01-01
... 38-MOTOR EQUIPMENT MANAGEMENT 38.8-Standard Form 149, U.S. Government National Credit Card § 109-38... the administrative control of fleet credit cards. Administrative control shall include, as a minimum: (1) A reconciliation of on-hand credit cards with the inventory list provided by GSA, (2) Providing...
Code of Federal Regulations, 2013 CFR
2013-07-01
... 38-MOTOR EQUIPMENT MANAGEMENT 38.8-Standard Form 149, U.S. Government National Credit Card § 109-38... the administrative control of fleet credit cards. Administrative control shall include, as a minimum: (1) A reconciliation of on-hand credit cards with the inventory list provided by GSA, (2) Providing...
Code of Federal Regulations, 2012 CFR
2012-01-01
... 38-MOTOR EQUIPMENT MANAGEMENT 38.8-Standard Form 149, U.S. Government National Credit Card § 109-38... the administrative control of fleet credit cards. Administrative control shall include, as a minimum: (1) A reconciliation of on-hand credit cards with the inventory list provided by GSA, (2) Providing...
The scaling behavior of hand motions reveals self-organization during an executive function task
NASA Astrophysics Data System (ADS)
Anastas, Jason R.; Stephen, Damian G.; Dixon, James A.
2011-05-01
Recent approaches to cognition explain cognitive phenomena in terms of interaction-dominant dynamics. In the current experiment, we extend this approach to executive function, a construct used to describe flexible, goal-oriented behavior. Participants were asked to perform a widely used executive function task, card sorting, under two conditions. In one condition, participants were given a rule with which to sort the cards. In the other condition, participants had to induce the rule from experimenter feedback. The motion of each participant’s hand was tracked during the sorting task. Detrended fluctuation analysis was performed on the inter-point time series using a windowing strategy to capture changes over each trial. For participants in the induction condition, the Hurst exponent sharply increased and then decreased. The Hurst exponents for the explicit condition did not show this pattern. Our results suggest that executive function may be understood in terms of changes in stability that arise from interaction-dominant dynamics.
48 CFR 1313.301 - Governmentwide commercial purchase card.
Code of Federal Regulations, 2010 CFR
2010-10-01
... purchase card. 1313.301 Section 1313.301 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE....301 Governmentwide commercial purchase card. The Department's procedures for the use and control of the Governmentwide commercial purchase card are set forth in CAM 1313.301. ...
Architecture for distributed actuation and sensing using smart piezoelectric elements
NASA Astrophysics Data System (ADS)
Etienne-Cummings, Ralph; Pourboghrat, Farzad; Maruboyina, Hari K.; Abrate, Serge; Dhali, Shirshak K.
1998-07-01
We discuss vibration control of a cantilevered plate with multiple sensors and actuators. An architecture is chosen to minimize the number of control and sensing wires required. A custom VLSI chip, integrated with the sensor/actuator elements, controls the local behavior of the plate. All the actuators are addressed in parallel; local decode logic selects which actuator is stimulated. Downloaded binary data controls the applied voltage and modulation frequency for each actuator, and High Voltage MOSFETs are used to activate them. The sensors, which are independent adjacent piezoelectric ceramic elements, can be accessed in a random or sequential manner. An A/D card and GPIB interconnected test equipment allow a PC to read the sensors' outputs and dictate the actuation procedure. A visual programming environment is used to integrate the sensors, controller and actuators. Based on the constitutive relations for the piezoelectric material, simple models for the sensors and actuators are derived. A two level hierarchical robust controller is derived for motion control and for damping of vibrations.
Missile Datcom User’s Manual - 2008 Revision
2008-08-01
and Surface Roughness ........................ 58 Table 24. Magnus derivatives calculated with SPIN Control Card...M.F.E. Dillenius (W.B. Blake) WL-TR-91-3039 (ADA 237817) 5 4/91 Inlets at sub/transonic speeds, additive drag Plume effects on body Six types...control card. This control card has no effect on input angles, input angles are always specified in degrees. Partial output results, which detail the
Holo-Chidi video concentrator card
NASA Astrophysics Data System (ADS)
Nwodoh, Thomas A.; Prabhakar, Aditya; Benton, Stephen A.
2001-12-01
The Holo-Chidi Video Concentrator Card is a frame buffer for the Holo-Chidi holographic video processing system. Holo- Chidi is designed at the MIT Media Laboratory for real-time computation of computer generated holograms and the subsequent display of the holograms at video frame rates. The Holo-Chidi system is made of two sets of cards - the set of Processor cards and the set of Video Concentrator Cards (VCCs). The Processor cards are used for hologram computation, data archival/retrieval from a host system, and for higher-level control of the VCCs. The VCC formats computed holographic data from multiple hologram computing Processor cards, converting the digital data to analog form to feed the acousto-optic-modulators of the Media lab's Mark-II holographic display system. The Video Concentrator card is made of: a High-Speed I/O (HSIO) interface whence data is transferred from the hologram computing Processor cards, a set of FIFOs and video RAM used as buffer for data for the hololines being displayed, a one-chip integrated microprocessor and peripheral combination that handles communication with other VCCs and furnishes the card with a USB port, a co-processor which controls display data formatting, and D-to-A converters that convert digital fringes to analog form. The co-processor is implemented with an SRAM-based FPGA with over 500,000 gates and controls all the signals needed to format the data from the multiple Processor cards into the format required by Mark-II. A VCC has three HSIO ports through which up to 500 Megabytes of computed holographic data can flow from the Processor Cards to the VCC per second. A Holo-Chidi system with three VCCs has enough frame buffering capacity to hold up to thirty two 36Megabyte hologram frames at a time. Pre-computed holograms may also be loaded into the VCC from a host computer through the low- speed USB port. Both the microprocessor and the co- processor in the VCC can access the main system memory used to store control programs and data for the VCC. The Card also generates the control signals used by the scanning mirrors of Mark-II. In this paper we discuss the design of the VCC and its implementation in the Holo-Chidi system.
Kinematics Card Sort Activity: Insight into Students' Thinking
ERIC Educational Resources Information Center
Berryhill, Erin; Herrington, Deborah; Oliver, Keith
2016-01-01
Kinematics is a topic students are unknowingly aware of well before entering the physics classroom. Students observe motion on a daily basis. They are constantly interpreting and making sense of their observations, unintentionally building their own understanding of kinematics before receiving any formal instruction. Unfortunately, when students…
MST radar transmitter control and monitor system
NASA Technical Reports Server (NTRS)
Brosnahan, J. W.
1983-01-01
A generalized transmitter control and monitor card was developed using the Intel 8031 (8051 family) microprocessor. The design was generalized so that this card can be utilized for virtually any control application with only firmware changes. The block diagram appears in Figure 2. The card provides for local control using a 16 key keypad (up to 64 keys are supported). The local display is four digits of 7 segment LEDs. The display can indicate the status of all major system parameters and provide voltage readout for the analog signal inputs. The card can be populated with only the chips required for a given application. Fully populated, the card has two RS-232 serial ports for computer communications. It has a total of 48 TTL parallel lines that can define as either inputs or outputs in groups of four. A total of 32 analog inputs with a 0-5 volt range are supported. In addition, a real-time clock/calendar is available if required. A total of 16 k bytes of ROM and 16 k bytes of RAM is available for programming. This card can be the basis of virtually any monitor or control system with appropriate software.
Dannewitz, Holly; Weatherly, Jeffrey N
2007-05-01
Cognitive fallacies, such as the illusion of control, and psychological disorders, such as depression, may perpetuate gambling and thus contribute to problem gambling (e.g., R. Ladouceur, C. Sylvan, C. Boutin, & C. Doucet, 2002). Gender differences may exist across these variables (e.g., N. M. Petry, 2005). The authors investigated these possibilities by recruiting mildly depressed and nondepressed individuals to play jacks or better, 5-card draw, video poker. Across three poker sessions, participants were given (a) no choice of which cards to play, (b) information on the best cards to play but control over which cards were played, or (c) no information and complete control over which cards were played. The total amount of money gambled increased as control over the game decreased, but this result correlated with an increase in the rate of play. Depressed and nondepressed participants did not differ in how they gambled, but men gambled significantly more and sometimes made more mistakes during play than did women. These results question the role of the illusion of control and depression in perpetuating gambling. They also suggest that providing players information about which cards to play may indirectly promote gambling and provide insight as to why men are more prone to suffer from gambling problems than are women.
Piloted Simulation Investigation of a Supersonic Transport Configuration (LaRC.4)
NASA Technical Reports Server (NTRS)
Jackson, E. Bruce; Martinez, Debbie; Derry, Stephen D.
1999-01-01
This report contains a description of the test facilities and software utilized during a joint NASA/aerospace industry study of improved control laws and desired inceptor characteristics for a candidate supersonic transport air-craft design. Details concerning the characteristics of the simulation cockpit, image generator and display systems, and motion platform are described. Depictions of the various display formats are included. The test schedule, session log, and flight cards describing the maneuvers performed is included. A brief summary of high-lights of the study is given. Modifications made to the industry-provided simulation model are described. This report is intended to serve as a reference document for industry researchers.
Emerging Technology for School Security
ERIC Educational Resources Information Center
Doss, Kevin T.
2012-01-01
Locks and keys ring up huge costs for education institutions. No wonder many facility directors and public-safety directors have turned to automated access-control systems with magnetic-stripe cards, proximity cards and, most recently, smart cards. Smart cards can provide a host of on- and off-campus services beyond security. In addition to…
Transportable telemetry workstation
NASA Technical Reports Server (NTRS)
Collins, Aaron S.
1989-01-01
The goal was to complete the design of a prototype for a Transportable Telemetry Workstation (TTW). The Macintosh 2 is used to provide a low-cost system which can house real-time cards mounted on the NuBus inside the Macintosh 2 plus provide a standardized user interface on the Macintosh 2 console. Prior to a telemetry run, the user will be able to configure his real-time telemetry processing functions from the Macintosh 2 console. During a telemetry run, the real-time cards will store the telemetry data directly on a hard disk while permitting viewing of the data cards on the Macintosh 2 console on various selectable formats. The user will view the cards in terms of the functions they perform and the selectable paths through the cards, it is not required to become involved directly in hardware issue except in terms of the functional configuration of the system components. The TTW will accept telemetry data from an RS422 serial input data bus, pass it through a frame synchronizer card and on to a real time controller card via a telemetry backplane bus. The controller card will then route the data to a hard disk through a SCSI interface, and/or to a user interface on the Macintosh 2 console by way of the Macintosh 2 NuBus. The three major components to be designed, therefore, are the TTW Controller Card, the TTW Synchronizer Card, and the NuBus/Macintosh 2 User Interface. Design and prototyping of this state-of-the-art, transportable, low-cost, easy-to-use multiprocessor telemetry system is continuing. Other functions are planned for the future.
Transportable telemetry workstation
NASA Astrophysics Data System (ADS)
Collins, Aaron S.
1989-09-01
The goal was to complete the design of a prototype for a Transportable Telemetry Workstation (TTW). The Macintosh 2 is used to provide a low-cost system which can house real-time cards mounted on the NuBus inside the Macintosh 2 plus provide a standardized user interface on the Macintosh 2 console. Prior to a telemetry run, the user will be able to configure his real-time telemetry processing functions from the Macintosh 2 console. During a telemetry run, the real-time cards will store the telemetry data directly on a hard disk while permitting viewing of the data cards on the Macintosh 2 console on various selectable formats. The user will view the cards in terms of the functions they perform and the selectable paths through the cards, it is not required to become involved directly in hardware issue except in terms of the functional configuration of the system components. The TTW will accept telemetry data from an RS422 serial input data bus, pass it through a frame synchronizer card and on to a real time controller card via a telemetry backplane bus. The controller card will then route the data to a hard disk through a SCSI interface, and/or to a user interface on the Macintosh 2 console by way of the Macintosh 2 NuBus. The three major components to be designed, therefore, are the TTW Controller Card, the TTW Synchronizer Card, and the NuBus/Macintosh 2 User Interface. Design and prototyping of this state-of-the-art, transportable, low-cost, easy-to-use multiprocessor telemetry system is continuing. Other functions are planned for the future.
Storage, retrieval, and edit of digital video using Motion JPEG
NASA Astrophysics Data System (ADS)
Sudharsanan, Subramania I.; Lee, D. H.
1994-04-01
In a companion paper we describe a Micro Channel adapter card that can perform real-time JPEG (Joint Photographic Experts Group) compression of a 640 by 480 24-bit image within 1/30th of a second. Since this corresponds to NTSC video rates at considerably good perceptual quality, this system can be used for real-time capture and manipulation of continuously fed video. To facilitate capturing the compressed video in a storage medium, an IBM Bus master SCSI adapter with cache is utilized. Efficacy of the data transfer mechanism is considerably improved using the System Control Block architecture, an extension to Micro Channel bus masters. We show experimental results that the overall system can perform at compressed data rates of about 1.5 MBytes/second sustained and with sporadic peaks to about 1.8 MBytes/second depending on the image sequence content. We also describe mechanisms to access the compressed data very efficiently through special file formats. This in turn permits creation of simpler sequence editors. Another advantage of the special file format is easy control of forward, backward and slow motion playback. The proposed method can be extended for design of a video compression subsystem for a variety of personal computing systems.
Duckworth, Angela L.; Quinn, Patrick D.; Tsukayama, Eli
2013-01-01
The increasing prominence of standardized testing to assess student learning motivated the current investigation. We propose that standardized achievement test scores assess competencies determined more by intelligence than by self-control, whereas report card grades assess competencies determined more by self-control than by intelligence. In particular, we suggest that intelligence helps students learn and solve problems independent of formal instruction, whereas self-control helps students study, complete homework, and behave positively in the classroom. Two longitudinal, prospective studies of middle school students support predictions from this model. In both samples, IQ predicted changes in standardized achievement test scores over time better than did self-control, whereas self-control predicted changes in report card grades over time better than did IQ. As expected, the effect of self-control on changes in report card grades was mediated in Study 2 by teacher ratings of homework completion and classroom conduct. In a third study, ratings of middle school teachers about the content and purpose of standardized achievement tests and report card grades were consistent with the proposed model. Implications for pedagogy and public policy are discussed. PMID:24072936
ERIC Educational Resources Information Center
Watson, Stevie
2009-01-01
This study examined attitudinal and behavioral differences between internal and external locus of control (LOC) consumers on credit card misuse, the importance of money, and compulsive buying. Using multiple analysis of variance and separate analyses of variance, internal LOC consumers were found to have lower scores on credit card misuse and…
Rigging the Deck: Selecting Good Problems for Expert-Novice Card-Sorting Experiments
ERIC Educational Resources Information Center
Wolf, Steven F.; Dougherty, Daniel P.; Kortemeyer, Gerd
2012-01-01
A seminal study by Chi "et al." firmly established the paradigm that novices categorize physics problems by "surface features" (e.g., "incline," "pendulum," "projectile motion," etc.), while experts use "deep structure" (e.g., "energy conservation," "Newton 2," etc.). Yet, efforts to replicate the study frequently fail, since the ability to…
ERIC Educational Resources Information Center
American Library Association, Chicago, IL.
Chapter 12 of the Anglo-American Cataloging Rules has been revised to provide rules for works in the principal audiovisual media (motion pictures, filmstrips, videorecordings, slides, and transparencies) as well as instructional aids (charts, dioramas, flash cards, games, kits, microscope slides, models, and realia). The rules for main and added…
Park, Kang Min; Kim, Sung Eun; Lee, Byung In
2016-01-01
The pathogenesis of card game-induced reflex epilepsy has not been determined so far. The aim of this study was to evaluate structural abnormalities using voxel-based morphometry (VBM) analysis, which may give some clue about the pathogenesis in card game-induced reflex epilepsy. The 3 subjects were diagnosed with card game-induced reflex epilepsy. Evaluation involved a structured interview to obtain clinical information and brain MRI. In VBM analysis, Statistical Parametric Mapping 8 running on the MATLAB platform was employed to analyze the structural differences between patients with card game-induced reflex epilepsy and age- and sex-matched control subjects. The results of VBM analysis revealed that patients with card game-induced reflex epilepsy had significantly increased gray matter volume in the right occipital and parietal lobe. However, there were no structures with decreased gray matter volume in patients with card game-induced reflex epilepsy compared with control subjects. In addition, we found that the patients with card game-induced reflex epilepsy had onset of seizures in adulthood rather than in adolescence, and all of the patients were men. The parieto-occipital lobes might be partially involved in the neuronal network responsible for card game-induced reflex epilepsy. © 2016 S. Karger AG, Basel.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-21
... card, a household's shopping behavior is three times more likely to be flagged as potential [[Page... many first-time users do not understand how to use the card and a grace period in the beginning would... that a replacement card is not needed every time the benefits are spent down or that once a card is...
Common Badging and Access Control System (CBACS)
NASA Technical Reports Server (NTRS)
Baldridge, Tim
2005-01-01
The goals of the project are: Achieve high business value through a common badging and access control system that integrates with smart cards. Provide physical (versus logical) deployment of smart cards initially. Provides a common consistent and reliable environment into which to release the smart card. Gives opportunity to develop agency-wide consistent processes, practices and policies. Enables enterprise data capture and management. Promotes data validation prior to SC issuance.
The Ins and Outs of Access Control.
ERIC Educational Resources Information Center
Longworth, David
1999-01-01
Presents basic considerations when school districts plan to acquire an access-control system for their education facilities. Topics cover cards and readers, controllers, software, automation, card technology, expandability, price, specification of needs beyond the canned specifications already supplied, and proper usage training to cardholders.…
Qin, Juan-Juan; Mao, Wenzhe; Wang, Xiaozhan; Sun, Peng; Cheng, Daqing; Tian, Song; Zhu, Xue-Yong; Yang, Ling; Huang, Zan; Li, Hongliang
2018-06-26
The comprehensive interplay in sterile inflammation and liver cell death predominantly determines hepatic injury caused by ischemia/reperfusion (I/R) insult. Caspase recruitment domain family member 6 (CARD6) was initially shown to play important roles in NF-κB activation. In our preliminary studies, CARD6 downregulation was closely related to hepatic I/R injury in liver transplantation patients and mouse models. Thus, we hypothesized that CARD6 protects against hepatic I/R injury and investigated the underlying molecular mechanisms. A partial hepatic I/R operation was performed in hepatocyte-specific Card6 knockout mice (HKO), Card6 transgenic mice with CARD6 overexpression specifically in hepatocytes (HTG), and the corresponding control mice. Hepatic histology, serum aminotransferase, inflammatory cytokines/chemokines, cell death, and inflammatory signaling were examined to assess liver damage. The molecular mechanisms of CARD6 function were explored in vivo and in vitro. Card6-HTG mice alleviated liver injury compared with control mice as shown by decreased cell death, lower serum transaminase levels, and reduced inflammation and infiltration, whereas Card6-HKO mice had the opposite phenotype. Mechanistically, phosphorylation of ASK1 and its downstream effectors JNK and p38 were increased in the livers of Card6-HKO mice but repressed in those of Card6-HTG mice. Furthermore, ASK1 knockdown normalized the effect of CARD6 deficiency on the activation of NF-κB, JNK and p38, while ASK1 overexpression abrogated the suppressive effect of CARD6. Finally, CARD6 interacted with Ask1. Mutant CARD6 that lacked the ability to interact with ASK1 could not inhibit ASK1 and failed to protect against hepatic I/R injury. CARD6 is a novel protective factor of hepatic I/R injury that suppresses inflammation and liver cell death by inhibiting the ASK1 signaling pathway. CARD6 participate and play an important role during the process of liver blood flow restriction followed by restoring. Through suppressing the activity of ASK1, CARD6 can protect against hepatocytes injury. Targeting CARD6 can be a strategy for precaution and treatment of this disease. Copyright © 2018 European Association for the Study of the Liver. Published by Elsevier B.V. All rights reserved.
Pinto, Mary Beth; Mansfield, Phylis M; Parente, Diane H
2004-06-01
College-age consumers are one of the groups most highly targeted by credit card marketers. While some college students use their credit cards wisely, others are unable to control their spending. The objective of this study was to investigate differences in attitude toward credit cards and the psychological factors of self-esteem and locus of control among college students who possess one or more credit cards. Attitude was operationalized to include three underlying components: cognitive, affective, and behavioral. We separated credit users into subcategories based on amount of installment debt. Convenience users were defined as those consumers who paid the credit-card balance in full each month. Installment users were classified as consumers who carried a balance month-to-month. Convenience users were compared to mild and heavy installment users to assess significance of differences in attitudinal and psychological factors. There were no significant differences in the psychological factors across the credit-card user groups. In addition, there was a statistically significant difference on each of the attitude components (knowledge/beliefs, affect, and behavior) across user groups; convenience users, mild installment, and heavy installment users.
Multivariable control theory applied to hierarchial attitude control for planetary spacecraft
NASA Technical Reports Server (NTRS)
Boland, J. S., III; Russell, D. W.
1972-01-01
Multivariable control theory is applied to the design of a hierarchial attitude control system for the CARD space vehicle. The system selected uses reaction control jets (RCJ) and control moment gyros (CMG). The RCJ system uses linear signal mixing and a no-fire region similar to that used on the Skylab program; the y-axis and z-axis systems which are coupled use a sum and difference feedback scheme. The CMG system uses the optimum steering law and the same feedback signals as the RCJ system. When both systems are active the design is such that the torques from each system are never in opposition. A state-space analysis was made of the CMG system to determine the general structure of the input matrices (steering law) and feedback matrices that will decouple the axes. It is shown that the optimum steering law and proportional-plus-rate feedback are special cases. A derivation of the disturbing torques on the space vehicle due to the motion of the on-board television camera is presented. A procedure for computing an upper bound on these torques (given the system parameters) is included.
Citizen empowerment using healthcare and welfare cards.
Cheshire, Paul
2006-01-01
Cards are used in health and welfare to establish the identity of the person presenting the card; to prove their entitlement to a welfare or healthcare service; to store data needed within the care process; and to store data to use in the administration process. There is a desire to empower citizens - to give them greater control over their lives, their health and wellbeing. How can a healthcare and welfare card support this aim? Does having a card empower the citizen? What can a citizen do more easily, reliably, securely or cost-effectively because they have a card? A number of possibilities include: Choice of service provider; Mobility across regional and national boundaries; Privacy; and Anonymity. But in all of these possibilities a card is just one component of a total system and process, and there may be other solutions--technological and manual. There are risks and problems from relying on a card; and issues of Inclusion for people who are unable use a card. The article concludes that: cards need to be viewed in the context of the whole solution; cards are not the only technological mechanism; cards are not the best mechanism in all circumstances; but cards are very convenient method in very many situations.
Bergmann, Hanna; Roth, Susanne; Pechloff, Konstanze; Kiss, Elina A; Kuhn, Sabine; Heikenwälder, Mathias; Diefenbach, Andreas; Greten, Florian R; Ruland, Jürgen
2017-08-01
Inflammatory bowel diseases (IBD) are key risk factors for the development of colorectal cancer, but the mechanisms that link intestinal inflammation with carcinogenesis are insufficiently understood. Card9 is a myeloid cell-specific signaling protein that regulates inflammatory responses downstream of various pattern recognition receptors and which cooperates with the inflammasomes for IL-1β production. Because polymorphisms in Card9 were recurrently associated with human IBD, we investigated the function of Card9 in a colitis-associated cancer (CAC) model. Card9 -/- mice develop smaller, less proliferative and less dysplastic tumors compared to their littermates and in the regenerating mucosa we detected dramatically impaired IL-1β generation and defective IL-1β controlled IL-22 production from group 3 innate lymphoid cells. Consistent with the key role of immune-derived IL-22 in activating STAT3 signaling during normal and pathological intestinal epithelial cell (IEC) proliferation, Card9 -/- mice also exhibit impaired tumor cell intrinsic STAT3 activation. Our results imply a Card9-controlled, ILC3-mediated mechanism regulating healthy and malignant IEC proliferation and demonstrates a role of Card9-mediated innate immunity in inflammation-associated carcinogenesis. © 2017 The Authors. European Journal of Immunology published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
CODAP: Control Card Specifications for the Univac 1108.
ERIC Educational Resources Information Center
Stacey, William D.; And Others
The document is one of three in a series of technical reports covering the control card and programing aspects of the Comprehensive Occupational Data Analysis Programs (CODAP), a highly interactive and efficient system of computer routines for analyzing, organizing, and reporting occupational information. The document contains control card…
Procurement Cards Pave the Way to Efficient Purchasing.
ERIC Educational Resources Information Center
Enos, Eileen D.
1999-01-01
As educators battle restricted budgets, inflation, and enrollment changes, strategic sourcing management is replacing traditional transaction-based procurement. Procurement-card programs, allowing organizations to use credit cards for small purchases or low-value items, save time and enhance controls over merchants, credit limits, issuance limits,…
25 CFR 543.23 - What are the minimum internal control standards for audit and accounting?
Code of Federal Regulations, 2014 CFR
2014-04-01
... supervision, bingo cards, bingo card sales, draw, prize payout; cash and equivalent controls, technologic aids... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for audit... INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.23 What are the...
25 CFR 543.23 - What are the minimum internal control standards for audit and accounting?
Code of Federal Regulations, 2013 CFR
2013-04-01
... supervision, bingo cards, bingo card sales, draw, prize payout; cash and equivalent controls, technologic aids... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for audit... INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.23 What are the...
77 FR 2685 - Proposed Collection; Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-19
..., Report of Terms of Credit Card Plans. DATES: Written comments must be received on or before March 19... (202) 435-7678. SUPPLEMENTARY INFORMATION: Title: Report of Terms of Credit Card Plans. OMB Control... of Terms of Credit Card, from the Federal Reserve Board to the CFPB on July 21, 2011. About 150...
Reminder card helps patients remember OCs.
1999-11-01
Organon has developed the Reminder Card to help women patients remember their regular intake of oral contraceptive (OC) pills. About 50% of women take birth control pills as prescribed, 25% miss a pill per month, and 25% miss two or more pills in the same time frame. The plastic card, about the size and shape of a credit card, contains a microchip timer. Reminder cards are available to providers who use the Starter Kits issued by the company for new-start patients on the Mircette OC. When patients begin their first pack of pills, they select the time of day they prefer to have the Reminder Card emit its tiny beep. The time is set into the microchip timer and the card is programmed to sound automatically at the pre-set time each day for the next three months. The direction for using the Reminder Card is outlined.
Newer Technologies for School Security. ERIC Digest Number 145.
ERIC Educational Resources Information Center
Schneider, Tod
This digest describes several technologies that can be used to control access to, and improve surveillance of, school grounds. Access can be controlled by using "smart" cards to control keyed entries. Many schools have problems with multiple copies of keys, and these card systems are integrated with computer software that allows for…
CARD8 rs2043211 polymorphism is associated with gout in a Chinese male population.
Chen, Ying; Ren, Xianfeng; Li, Changgui; Xing, Shichao; Fu, Zhengju; Yuan, Ying; Wang, Robin; Wang, Yangang; Lv, Wenshan
2015-01-01
BACKGROUND &AIM: Previous studies have suggested genetic factors are involved in the development of gout. We performed a case-control study to investigate the genetic association between CARD8 rs2043211 polymorphism and gout. A total of 396 male patients with gout and 403 age- and sex- matched healthy controls were included in this study. Genotyping was performed using TaqMan SNP Genotyping Assays. An association analysis was carried out using the χ² test. The genotype-phenotype analysis was also conducted. The genotype distribution of CARD8 rs2043211 polymorphism confirmed to HWE in the controls (P = 0.27). There was an obvious difference in the genotype distribution of CARD8 rs2043211 polymorphism between cases and controls (P = 0.017). In addition, there was an obvious association between CARD8 rs2043211 polymorphism and gout under the recessive comparison model (AA vs. OR = 0.65, 95%CI 0.47-0.88, P = 0.006). Patients carrying genotype TT of CARD8 rs2043211 polymorphism had higher triglycerides levels compared to those carrying the AA genotype (2.77±2.08 mmol/L vs. 2.07±1.15 mmol/L, P = 0.01). Patients with the TT genotype also had significantly higher systolic blood pressure compared with those with the AA genotype (142.11±21.10 mmHg vs. 135.38±14.66 mmHg, P = 0.03). Patients carrying TT genotype also had an increased risk of renal calculus compared with those carrying the AA genotype. CARD8 rs2043211 polymorphism is significantly associated with susceptibility to gout in Chinese Han males. © 2015 S. Karger AG, Basel.
Disease duration and age influence CARD15 expression in Crohn's disease.
Poniewierka, Elżbieta; Neubauer, Katarzyna; Kempiński, Radosław; Sadakierska-Chudy, Anna
2016-01-05
One of the susceptibility genes in Crohn's disease (CD) is CARD15. Our study examined the relationship between peripheral CARD15 expression and phenotype and duration of CD, treatment methods and inflammatory indices. Sixty patients with CD and 30 healthy volunteers as controls were enrolled in the study. Total RNA was isolated from peripheral blood mononuclear cells (PBMCs) with E.Z.N.A. Total RNA Kit (Omega Bio-tek) then quantitative real-time PCR was performed on the ABI Prism 7900 HT Real-Time PCR System. CARD15 gene expression in PBMCs in CD was significantly higher than in the control group. The highest level of gene expression was found in CD patients in the fourth decade of life. The mRNA level of the CARD15 gene was higher in patients with disease duration between 12 and 60 months. A positive correlation was found between erythrocyte sedimentation rate (ESR) and gene expression level. Gene expression increased with increasing level of C-reactive protein and ESR, but it was not statistically significant. CARD15 expression significantly decreased in CD patients treated with anti-TNFα agents compared to azathioprine or steroid treatment groups. Expression of the CARD15 gene in Crohn›s disease is higher than in healthy individuals. Disease duration and age of patients seem to be the most important factors influencing CARD15 expression.
Eye movements during the Rorschach test in schizophrenia.
Hori, Yasuko; Fukuzako, Hiroshi; Sugimoto, Yoko; Takigawa, Morikuni
2002-08-01
In order to understand relationships between scanning behaviors, characteristics of visual stimuli and the clinical symptoms in schizophrenia, eye movements of 37 schizophrenic patients and 36 controls were recorded using an eye-mark recorder during a free-response period in a Rorschach test. Four cards (I, II, V and VIII) were used. Data were analyzed during 15 s from the presentation of each card. For all cards, the number of eye fixations and the number of eye fixation areas were fewer, and total scanning length and mean scanning length were shorter for schizophrenic patients than for controls. For card II, in the non-popular response group, eye fixation frequency upon area 5 + 6 (red) was higher for schizophrenic patients. For card VIII, in the popular response group, eye fixation frequency upon area 5 + 6 (pink) was lower for schizophrenic patients. For cards II and VIII, the number of eye fixations was inversely correlated with negative symptoms. For card II, total scanning length tended to be inversely correlated with negative symptoms, and mean eye fixation time was correlated with negative symptoms. The number of eye fixation areas was inversely correlated with positive symptoms. For card VIII, eye fixation frequency in a stimulative area tended to be correlated with positive symptoms. Scanning behaviors in schizophrenic patients are affected by characteristics of visual stimuli, and partially by clinical symptoms.
Shovel, Louisa; Max, Bryan; Correll, Darin J
2016-01-01
The purpose of this study was to see if an instructional card, attached to the PCA machine following total hip arthroplasty describing proper use of the device, would positively affect subjects' understanding of device usage, pain scores, pain medication consumption and satisfaction. Eighty adults undergoing total hip replacements who had been prescribed PCA were randomized into two study groups. Forty participants received the standard post-operative instruction on PCA device usage at our institution. The other 40 participants received the standard of care in addition to being given a typed instructional card immediately post-operatively, describing proper PCA device use. This card was attached to the PCA device during their recovery period. On post-operative day one, each patient completed a questionnaire on PCA usage, pain scores and satisfaction scores. The pain scores in the Instructional Card group were significantly lower than the Control group (p = 0.024). Subjects' understanding of PCA usage was also improved in the Instructional Card group for six of the seven questions asked. The findings from this study strongly support that postoperative patient information on proper PCA use by means of an instructional card improves pain control and hence the overall recovery for patients undergoing surgery. In addition, through improved understanding it adds an important safety feature in that patients and potentially their family members and/or friends may refrain from PCA-by-proxy. This article demonstrates that the simple intervention of adding an instructional card to a PCA machine is an effective method to improve patients' knowledge as well as pain control and potentially increase the safety of the device use.
25 CFR 542.9 - What are the minimum internal control standards for card games?
Code of Federal Regulations, 2013 CFR
2013-04-01
... games? 542.9 Section 542.9 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN... card games? (a) Computer applications. For any computer applications utilized, alternate documentation... and count. The procedures for the collection of the card game drop and the count thereof shall comply...
25 CFR 542.9 - What are the minimum internal control standards for card games?
Code of Federal Regulations, 2012 CFR
2012-04-01
... games? 542.9 Section 542.9 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN... card games? (a) Computer applications. For any computer applications utilized, alternate documentation... and count. The procedures for the collection of the card game drop and the count thereof shall comply...
25 CFR 542.9 - What are the minimum internal control standards for card games?
Code of Federal Regulations, 2014 CFR
2014-04-01
... games? 542.9 Section 542.9 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN... card games? (a) Computer applications. For any computer applications utilized, alternate documentation... and count. The procedures for the collection of the card game drop and the count thereof shall comply...
25 CFR 542.9 - What are the minimum internal control standards for card games?
Code of Federal Regulations, 2011 CFR
2011-04-01
... games? 542.9 Section 542.9 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN... card games? (a) Computer applications. For any computer applications utilized, alternate documentation... and count. The procedures for the collection of the card game drop and the count thereof shall comply...
25 CFR 542.9 - What are the minimum internal control standards for card games?
Code of Federal Regulations, 2010 CFR
2010-04-01
... games? 542.9 Section 542.9 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN... card games? (a) Computer applications. For any computer applications utilized, alternate documentation... and count. The procedures for the collection of the card game drop and the count thereof shall comply...
Defense Automation Resources Management Manual
1988-09-01
Electronic Command Signals Programmer, Plugboard Programmers Punch, Card Punch, Paper Tape Reader, Character Reader-Generator, Time Cards Reader...Multiplexor-Shift Register Group Multiplier Panel Control, Plugboard Panel, Interconnection, Digital Computer Panel, Meter-Attenuator, Tape Recorder PC Cards...Perforator, Tape Plug-In Unit Potentiometer, Coefficient, Analog Computer Programmer, Plugboard Punch, Paper Tape Racks Reader, Time Code Reader
Quantum key distribution using card, base station and trusted authority
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nordholt, Jane E.; Hughes, Richard John; Newell, Raymond Thorson
Techniques and tools for quantum key distribution ("QKD") between a quantum communication ("QC") card, base station and trusted authority are described herein. In example implementations, a QC card contains a miniaturized QC transmitter and couples with a base station. The base station provides a network connection with the trusted authority and can also provide electric power to the QC card. When coupled to the base station, after authentication by the trusted authority, the QC card acquires keys through QKD with a trust authority. The keys can be used to set up secure communication, for authentication, for access control, or formore » other purposes. The QC card can be implemented as part of a smart phone or other mobile computing device, or the QC card can be used as a fillgun for distribution of the keys.« less
Quantum key distribution using card, base station and trusted authority
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nordholt, Jane Elizabeth; Hughes, Richard John; Newell, Raymond Thorson
Techniques and tools for quantum key distribution ("QKD") between a quantum communication ("QC") card, base station and trusted authority are described herein. In example implementations, a QC card contains a miniaturized QC transmitter and couples with a base station. The base station provides a network connection with the trusted authority and can also provide electric power to the QC card. When coupled to the base station, after authentication by the trusted authority, the QC card acquires keys through QKD with a trusted authority. The keys can be used to set up secure communication, for authentication, for access control, or formore » other purposes. The QC card can be implemented as part of a smart phone or other mobile computing device, or the QC card can be used as a fillgun for distribution of the keys.« less
A Cost Effective System Design Approach for Critical Space Systems
NASA Technical Reports Server (NTRS)
Abbott, Larry Wayne; Cox, Gary; Nguyen, Hai
2000-01-01
NASA-JSC required an avionics platform capable of serving a wide range of applications in a cost-effective manner. In part, making the avionics platform cost effective means adhering to open standards and supporting the integration of COTS products with custom products. Inherently, operation in space requires low power, mass, and volume while retaining high performance, reconfigurability, scalability, and upgradability. The Universal Mini-Controller project is based on a modified PC/104-Plus architecture while maintaining full compatibility with standard COTS PC/104 products. The architecture consists of a library of building block modules, which can be mixed and matched to meet a specific application. A set of NASA developed core building blocks, processor card, analog input/output card, and a Mil-Std-1553 card, have been constructed to meet critical functions and unique interfaces. The design for the processor card is based on the PowerPC architecture. This architecture provides an excellent balance between power consumption and performance, and has an upgrade path to the forthcoming radiation hardened PowerPC processor. The processor card, which makes extensive use of surface mount technology, has a 166 MHz PowerPC 603e processor, 32 Mbytes of error detected and corrected RAM, 8 Mbytes of Flash, and I Mbytes of EPROM, on a single PC/104-Plus card. Similar densities have been achieved with the quad channel Mil-Std-1553 card and the analog input/output cards. The power management built into the processor and its peripheral chip allows the power and performance of the system to be adjusted to meet the requirements of the application, allowing another dimension to the flexibility of the Universal Mini-Controller. Unique mechanical packaging allows the Universal Mini-Controller to accommodate standard COTS and custom oversized PC/104-Plus cards. This mechanical packaging also provides thermal management via conductive cooling of COTS boards, which are typically designed for convection cooling methods.
How can the German Electronic Health Card support patient's role in care management.
Pharow, Peter; Blobel, Bernd; Hildebrand, Claudia
2008-01-01
All types of advanced communication, collaboration, and cooperation in healthcare require a strong involvement of all addressed parties including health professionals and patients. Modern healthcare aims at involving patients having them take over responsibility for their own health status. Allowing them to take on their changed roles as emancipated partners in advanced care management, health professionals need to be educated and patients need to be empowered. From a security viewpoint, health issues have to be communicated via trusted health networks. To provide communication and cooperation between professionals and patients as well as to guarantee the required level of involvement of patients in shared care management environments, cards are widely used as person identifiers, on the one hand, and as security tokens, on the other. Being introduced as storage media and portable personalized application system, cards enable a patient controlled access to personalized health services as well as proper use and exchange of personal health data for specific purposes such as emergency. Furthermore, cards allow access to the wider electronic patient record via pointers or tickets. Cards can empower patients. The German Electronic Health Card (eGK) shall thus support care management and specific workflow processes e.g. for prescription and disease management. Regardless whether designed as data or pointer card - international standardization is a prerequisite also for national solutions. The more information patients have regarding different procedures and processes in healthcare, the more are they able to play their dedicated role within care management. Cards can and will contribute by allowing patients to get controlled access to administrative and medical data stored either on cards or in networks. Card holders determine who has access to their health information.
ERIC Educational Resources Information Center
Schneider, Tod
This digest in Spanish describes several technologies that can be used to control access to, and improve surveillance of, school grounds. Access can be controlled by using "smart" cards to control keyed entries. Many schools have problems with multiple copies of keys, and these card systems are integrated with computer software that…
Exploiting MIC architectures for the simulation of channeling of charged particles in crystals
NASA Astrophysics Data System (ADS)
Bagli, Enrico; Karpusenko, Vadim
2016-08-01
Coherent effects of ultra-relativistic particles in crystals is an area of science under development. DYNECHARM + + is a toolkit for the simulation of coherent interactions between high-energy charged particles and complex crystal structures. The particle trajectory in a crystal is computed through numerical integration of the equation of motion. The code was revised and improved in order to exploit parallelization on multi-cores and vectorization of single instructions on multiple data. An Intel Xeon Phi card was adopted for the performance measurements. The computation time was proved to scale linearly as a function of the number of physical and virtual cores. By enabling the auto-vectorization flag of the compiler a three time speedup was obtained. The performances of the card were compared to the Dual Xeon ones.
ERIC Educational Resources Information Center
Villano, Matt
2008-01-01
Building access control (BAC)--a catchall phrase to describe the systems that control access to facilities across campus--has traditionally been handled with remarkably low-tech solutions: (1) manual locks; (2) electronic locks; and (3) ID cards with magnetic strips. Recent improvements have included smart cards and keyless solutions that make use…
The NASTRAN user's manual (level 17.0)
NASA Technical Reports Server (NTRS)
1979-01-01
NASTRAN embodies a lumped element approach, wherein the distributed physical properties of a structure are represented by a model consisting of a finite number of idealized substructures or elements that are interconnected at a finite of grid points, to which loads are applied. All input and output data pertain to the idealized structural model. The general procedures for defining structural models are described and instructions are given for each of the bulk data cards and case control cards. Additional information on the case control cards and use of parameters is included for each rigid format.
User’s Guide for COMBIMAN Programs (COMputerized BIomechanical MAN-Model). Version 4.
1981-01-01
103 2.2.23 STATE SWITCH Function (PFK29) 105 2.2.24 RESTART PROGRAM Function (PFK30) 110 2.2.25 END PROGRAM Function (PFK31) il 2.3 EXECUTING THE JOB...108 40 Transformation Equation Developed for Positioning Stomach Link (Set State Switch 72 ON) 109 41 JOB CONTROL CARDS to Execute CBM04. 114 42...154 50b Program CBMAM Survey Member Dimension Definition Cards. 154 51 Example of Survey, or Type 1, Member. 155 52 Job Control Cards to Execute CBMAM
Authentication techniques for smart cards
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nelson, R.A.
1994-02-01
Smart card systems are most cost efficient when implemented as a distributed system, which is a system without central host interaction or a local database of card numbers for verifying transaction approval. A distributed system, as such, presents special card and user authentication problems. Fortunately, smart cards offer processing capabilities that provide solutions to authentication problems, provided the system is designed with proper data integrity measures. Smart card systems maintain data integrity through a security design that controls data sources and limits data changes. A good security design is usually a result of a system analysis that provides a thoroughmore » understanding of the application needs. Once designers understand the application, they may specify authentication techniques that mitigate the risk of system compromise or failure. Current authentication techniques include cryptography, passwords, challenge/response protocols, and biometrics. The security design includes these techniques to help prevent counterfeit cards, unauthorized use, or information compromise. This paper discusses card authentication and user identity techniques that enhance security for microprocessor card systems. It also describes the analysis process used for determining proper authentication techniques for a system.« less
A cost-effective add-on-value card-assisted firewall over Taiwan's NHI VPN framework.
Huang, Jyh-Win; Hou, Ting-Wei
2007-06-01
Besides the overall budget for building the infrastructure of a healthcare-service-based virtual private network (VPN) in Taiwan, two issues were considered critical for its acceptance by the country's 17,000 plus medical institutions. One was who was to pay for the network (ADSL or modem) connection fee; the other was who was to pay for the firewall/anti-virus software. This paper addresses the second issue by proposing an efficient freeware firewall, named card-assisted firewall (CAF), for NHI VPN edge-hosts, which is also an add-on-value application of the National Healthcare IC card that every insurant and medical professional has. The innovative concept is that any NHI VPN site (edge-host) can establish diversified secure-authenticated connections with other sites only by an authentication mechanism, which requires a NHI Java card state machine and the Access Control List of the host. It is different from two-factor authentication cards in four ways: (1) a PIN code is not a must; (2) it requires authentication with the remote IC card Data Centre; (3) the NHI cards are already available, no modification is needed, and there is no further cost for the deployment of the cards; (4) although the cards are in the reader, the communication cannot start unless the cards are in the corresponding states; i.e. the states allow communication. An implementation, on a Microsoft Windows XP platform, demonstrated the system's feasibility over an emulation of the NHI VPN framework. It maintained a high line speed, the driver took up 39 KB of disk space, installation was simple, not requiring any extra hardware or software, and the average packet processing time of the CAF driver measured was 0.3084 ms. The average overhead in comparing the Access Control List predefined routing in card, in an FTP testing experiment, was 5.7 micros (receiving) and 8 micros (sending).
ERIC Educational Resources Information Center
Duckworth, Angela L.; Quinn, Patrick D.; Tsukayama, Eli
2012-01-01
The increasing prominence of standardized testing to assess student learning motivated the current investigation. We propose that standardized achievement test scores assess competencies determined more by intelligence than by self-control, whereas report card grades assess competencies determined more by self-control than by intelligence. In…
SuperState: a computer program for the control of operant behavioral experimentation.
Zhang, Fuqiang
2006-09-15
Operant behavioral researches require precise control of experimental devices for delivering stimuli and monitoring behavioral responses. The author developed a software solution named SuperState for controlling hardware devices and running reinforcement schedules. The Microsoft Windows compatible software was written by use of an object-oriented programming language Borland Delphi 5.0, which has simplified the programming of the application. SuperState is a stand-alone easy-to-use green software, without the need for the experimenter to master any scripting languages. It features: (1) control of multiple operant cages running independent reinforcement schedules; (2) enough cage devices (16 digital inputs and 16 digital outputs for each cage) suitable for the need of most operant behavioral equipments; (3) control of most standard ISA-type digital interface cards including Med-Associates Super-port cards and a PCI-type card AC6412, and highly expandable to support other PCI-type interface cards; (4) high-resolution device control (1ms); (5) a built-in real-time cumulative recorder; (6) extensive data analyzing including event recorder, cumulative recorder, block analyzing; the summarized results can be transferred easily to Microsoft Excel spreadsheets through the Clipboard.
TACS Central Control Facility.
1981-02-12
PULSE RTC REAL TIME CLOCK -{> I . SIGNAL INVERSION UASC UNIVERSAL ASYNCHRONOUS SERIAL - ---- 4w SPECIAL INTERFACE CONTROLLER Fiq. 2-1. MAC hardware...34 Universal Asynchronous Serial Controller" (UASC) cards. The cards implement an RS-232 standard interface. All controllers are set to operate at a data...Bridwell and I. Richer, "A Preliminary Design of a TDMA System for FLEETSAT," Technical Note 1975-5, Lincoln Laboratory, M.I.T. (12 March 1975), DDC
Leccese, Fabio; Cagnetti, Marco; Trinca, Daniele
2014-01-01
A smart city application has been realized and tested. It is a fully remote controlled isle of lamp posts based on new technologies. It has been designed and organized in different hierarchical layers, which perform local activities to physically control the lamp posts and transmit information with another for remote control. Locally, each lamp post uses an electronic card for management and a ZigBee tlc network transmits data to a central control unit, which manages the whole isle. The central unit is realized with a Raspberry-Pi control card due to its good computing performance at very low price. Finally, a WiMAX connection was tested and used to remotely control the smart grid, thus overcoming the distance limitations of commercial Wi-Fi networks. The isle has been realized and tested for some months in the field. PMID:25529206
Leccese, Fabio; Cagnetti, Marco; Trinca, Daniele
2014-12-18
A smart city application has been realized and tested. It is a fully remote controlled isle of lamp posts based on new technologies. It has been designed and organized in different hierarchical layers, which perform local activities to physically control the lamp posts and transmit information with another for remote control. Locally, each lamp post uses an electronic card for management and a ZigBee tlc network transmits data to a central control unit, which manages the whole isle. The central unit is realized with a Raspberry-Pi control card due to its good computing performance at very low price. Finally, a WiMAX connection was tested and used to remotely control the smart grid, thus overcoming the distance limitations of commercial Wi-Fi networks. The isle has been realized and tested for some months in the field.
Slow Controls Using the Axiom M5235BCC
NASA Astrophysics Data System (ADS)
Hague, Tyler
2008-10-01
The Forward Vertex Detector group at PHENIX plans to adopt the Axiom M5235 Business Card Controller for use as slow controls. It is also being evaluated for slow controls on FermiLab e906. This controller features the Freescale MCF5235 microprocessor. It also has three parallel buses, these being the MCU port, BUS port, and enhanced Time Processing Unit (eTPU) port. The BUS port uses a chip select module with three external chip selects to communicate with peripherals. This will be used to communicate with and configure Field Programmable Gate Arrays (FPGAs). The controller also has an Ethernet port which can use several different protocols such as TCP and UDP. This will be used to transfer files with computers on a network. The M5235 Business Card Controller will be placed in a VME crate along with VME card and a Spartan-3 FPGA.
Iserbyt, Peter; Byra, Mark
2013-11-01
Research investigating design effects of instructional tools for learning Basic Life Support (BLS) is almost non-existent. To demonstrate the design of instructional tools matter. The effect of spatial contiguity, a design principle stating that people learn more deeply when words and corresponding pictures are placed close (i.e., integrated) rather than far from each other on a page was investigated on task cards for learning Cardiopulmonary Resuscitation (CPR) during reciprocal peer learning. A randomized controlled trial. A total of 111 students (mean age: 13 years) constituting six intact classes learned BLS through reciprocal learning with task cards. Task cards combine a picture of the skill with written instructions about how to perform it. In each class, students were randomly assigned to the experimental group or the control. In the control, written instructions were placed under the picture on the task cards. In the experimental group, written instructions were placed close to the corresponding part of the picture on the task cards reflecting application of the spatial contiguity principle. One-way analysis of variance found significantly better performances in the experimental group for ventilation volumes (P=.03, ηp2=.10) and flow rates (P=.02, ηp2=.10). For chest compression depth, compression frequency, compressions with correct hand placement, and duty cycles no significant differences were found. This study shows that the design of instructional tools (i.e., task cards) affects student learning. Research-based design of learning tools can enhance BLS and CPR education. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.
Aidlen, Jeremy T; Glick, Sara; Silverman, Kenneth; Silverman, Harvey F; Luks, Francois I
2009-08-01
Light-weight, low-profile, and high-resolution head-mounted displays (HMDs) now allow personalized viewing, of a laparoscopic image. The advantages include unobstructed viewing, regardless of position at the operating table, and the possibility to customize the image (i.e., enhanced reality, picture-in-picture, etc.). The bright image display allows use in daylight surroundings and the low profile of the HMD provides adequate peripheral vision. Theoretic disadvantages include reliance for all on the same image capture and anticues (i.e., reality disconnect) when the projected image remains static, despite changes in head position. This can lead to discomfort and even nausea. We have developed a prototype of interactive laparoscopic image display that allows hands-free control of the displayed image by changes in spatial orientation of the operator's head. The prototype consists of an HMD, a spatial orientation device, and computer software to enable hands-free panning and zooming of a video-endoscopic image display. The spatial orientation device uses magnetic fields created by a transmitter and receiver, each containing three orthogonal coils. The transmitter coils are efficiently driven, using USB power only, by a newly developed circuit, each at a unique frequency. The HMD-mounted receiver system links to a commercially available PC-interface PCI-bus sound card (M-Audiocard Delta 44; Avid Technology, Tewksbury, MA). Analog signals at the receiver are filtered, amplified, and converted to digital signals, which are processed to control the image display. The prototype uses a proprietary static fish-eye lens and software for the distortion-free reconstitution of any portion of the captured image. Left-right and up-down motions of the head (and HMD) produce real-time panning of the displayed image. Motion of the head toward, or away from, the transmitter causes real-time zooming in or out, respectively, of the displayed image. This prototype of the interactive HMD allows hands-free, intuitive control of the laparoscopic field, independent of the captured image.
7 CFR 989.158 - Natural condition raisins.
Code of Federal Regulations, 2011 CFR
2011-01-01
... only to raisins which have not been removed from their containers, with pallet control cards still... containing raisins that are wet, or of high moisture content in some areas of the box; (ii) dump raisins from... each pallet a prenumbered RAC control card (to be furnished by the Committee), and kept separate and...
7 CFR 989.158 - Natural condition raisins.
Code of Federal Regulations, 2010 CFR
2010-01-01
... only to raisins which have not been removed from their containers, with pallet control cards still... containing raisins that are wet, or of high moisture content in some areas of the box; (ii) dump raisins from... each pallet a prenumbered RAC control card (to be furnished by the Committee), and kept separate and...
7 CFR 989.158 - Natural condition raisins.
Code of Federal Regulations, 2013 CFR
2013-01-01
... only to raisins which have not been removed from their containers, with pallet control cards still... containing raisins that are wet, or of high moisture content in some areas of the box; (ii) dump raisins from... each pallet a prenumbered RAC control card (to be furnished by the Committee), and kept separate and...
7 CFR 989.158 - Natural condition raisins.
Code of Federal Regulations, 2014 CFR
2014-01-01
... only to raisins which have not been removed from their containers, with pallet control cards still... containing raisins that are wet, or of high moisture content in some areas of the box; (ii) dump raisins from... each pallet a prenumbered RAC control card (to be furnished by the Committee), and kept separate and...
7 CFR 989.158 - Natural condition raisins.
Code of Federal Regulations, 2012 CFR
2012-01-01
... only to raisins which have not been removed from their containers, with pallet control cards still... containing raisins that are wet, or of high moisture content in some areas of the box; (ii) dump raisins from... each pallet a prenumbered RAC control card (to be furnished by the Committee), and kept separate and...
31 CFR 1028.210 - Anti-money laundering programs for operators of credit card systems.
Code of Federal Regulations, 2013 CFR
2013-07-01
... minimum, the program must: (1) Incorporate policies, procedures, and internal controls designed to ensure... program reasonably designed to prevent the operator of a credit card system from being used to facilitate... Designated Nationals List issued by Treasury's Office of Foreign Assets Control; (C) A person located in, or...
31 CFR 1028.210 - Anti-money laundering programs for operators of credit card systems.
Code of Federal Regulations, 2012 CFR
2012-07-01
... minimum, the program must: (1) Incorporate policies, procedures, and internal controls designed to ensure... program reasonably designed to prevent the operator of a credit card system from being used to facilitate... Designated Nationals List issued by Treasury's Office of Foreign Assets Control; (C) A person located in, or...
31 CFR 1028.210 - Anti-money laundering programs for operators of credit card systems.
Code of Federal Regulations, 2014 CFR
2014-07-01
... minimum, the program must: (1) Incorporate policies, procedures, and internal controls designed to ensure... program reasonably designed to prevent the operator of a credit card system from being used to facilitate... Designated Nationals List issued by Treasury's Office of Foreign Assets Control; (C) A person located in, or...
31 CFR 1028.210 - Anti-money laundering programs for operators of credit card systems.
Code of Federal Regulations, 2011 CFR
2011-07-01
... minimum, the program must: (1) Incorporate policies, procedures, and internal controls designed to ensure... program reasonably designed to prevent the operator of a credit card system from being used to facilitate... Designated Nationals List issued by Treasury's Office of Foreign Assets Control; (C) A person located in, or...
PROCESS WATER BUILDING, TRA605. CONTROL PANEL SUPPLIES STATUS INDICATORS. CARD ...
PROCESS WATER BUILDING, TRA-605. CONTROL PANEL SUPPLIES STATUS INDICATORS. CARD IN LOWER RIGHT WAS INSERTED BY INL PHOTOGRAPHER TO COVER AN OBSOLETE SECURITY RESTRICTION ON ORIGINAL NEGATIVE. INL NEGATIVE NO. 4219. Unknown Photographer, 2/13/1952 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID
77 FR 21420 - Airworthiness Directives; Cessna Aircraft Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-10
.... ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain Cessna... fuel control card, due to the cross-feed inputs on the left- and right-hand fuel control cards being connected together and causing an imbalance of fuel between the left and right wing tanks. This AD requires...
NPS Government Purchase Card Program: An Analysis of Internal Controls
2014-03-01
approving official APC agency program coordinator CCPMD Consolidated Card Program Management Division CH cardholder COSO Committee of Sponsoring...correct, and minimize fraud, waste, and abuse” (DPAP, 2011, p. 2-2). To minimize risks , the management and internal controls should have support from...three interrelated subjects: enterprise risk management (ERM), internal control, and fraud deterrence” (para. 6). The 23 five components of an
Computer system for scanning tunneling microscope automation
NASA Astrophysics Data System (ADS)
Aguilar, M.; García, A.; Pascual, P. J.; Presa, J.; Santisteban, A.
1987-03-01
A computerized system for the automation of a scanning tunneling microscope is presented. It is based on an IBM personal computer (PC) either an XT or an AT, which performs the control, data acquisition and storage operations, displays the STM "images" in real time, and provides image processing tools for the restoration and analysis of data. It supports different data acquisition and control cards and image display cards. The software has been designed in a modular way to allow the replacement of these cards and other equipment improvements as well as the inclusion of user routines for data analysis.
Camino Willhuber, Gaston Oscar; Guzman Mentesana, Gustavo; Baez, Alejandra; Lo Presti, Silvina; Bazán, Carolina; Strauss, Mariana; Fretes, Ricardo; Paglini-Oliva, Patricia Adriana; Rivarola, Hector Walter
2017-09-08
ResumenIntroducción: la actividad mitocondrial es esencial para el músculo cardíaco y esquelético. La relación entre la disfunción mitocondrial y diferentes condiciones cardiovasculares ha sido bien descrita. El tratamiento farmacológico de la insuficiencia cardíaca implica diferentes medicamentos como: inhibidores de la enzima convertidora de la angiotensina, bloqueadores B-adrenérgicos, glucósidos digitálicos y diuréticos. Los beneficios clínicos del tratamiento son claros, sin embargo, el papel de estos fármacos en el metabolismo mitocondrial no esta bien establecido.Objetivo del estudio: El objetivo de nuestro estudio fue analizar las características estructurales y funcionales de las mitocondrias del músculo cardíaco y esquelético en ratones tratados con fármacos habitualmente utilizados para la insuficiencia cardíaca y compararlo con un grupo control.Métodos: Veinticinco ratones albinos divididos en cinco grupos fueron tratados con la medicación para insuficiencia cardíaca durante 30 días (grupo I a IV). 30 días después del tratamiento se sacrificaron, el corazón y el músculo esquelético se analizaron y se compararon con un grupo control (V).Resultados: La actividad enzimática se incrementó ligeramente en los grupos tratados con medicamentos insuficiencia cardiaca en comparación con el grupo control (p> 0,05). morfología mitocondrial se modificó significativamente en los grupos tratados en comparación con el grupo control, además, el área mitocondrial fue significativamente mayor en los grupos tratados, tanto en el músculo cardíaco y estriado.Conclusiones: Concluimos que la medicación insuficiencia cardíaca podría producir modificaciones en la función mitocondrial; creemos que las mitocondrias pueden mantener la actividad enzimática mediante el aumento de tamaño y modificación de la morfología.
EuCARD2: enhanced accelerator research and development in Europe
NASA Astrophysics Data System (ADS)
Romaniuk, Ryszard S.
2013-10-01
Accelerator science and technology is one of a key enablers of the developments in the particle physic, photon physics and also applications in medicine and industry. EuCARD2 is an European research project which will be realized during 2013-2017 inside the EC FP7 framework. The project concerns the development and coordination of European Accelerator Research and Development. The project is particularly important, to a number of domestic laboratories, due to some plans to build large accelerator infrastructure in Poland. Large accelerator infrastructure of fundamental and applied research character stimulates around it the development and industrial applications as well as biomedical of advanced accelerators, material research and engineering, cryo-technology, mechatronics, robotics, and in particular electronics - like networked measurement and control systems, sensors, computer systems, automation and control systems. The paper presents a digest of the European project EuCARD2 which is Enhanced European Coordination for Accelerator Research and Development. The paper presents a digest of the research results and assumptions in the domain of accelerator science and technology in Europe, shown during the final fourth annual meeting of the EuCARD - European Coordination of Accelerator R&D, and the kick-off meeting of the EuCARD2. There are debated a few basic groups of accelerator systems components like: measurement - control networks of large geometrical extent, multichannel systems for large amounts of metrological data acquisition, precision photonic networks of reference time, frequency and phase distribution, high field magnets, superconducting cavities, novel beam collimators, etc. The paper bases on the following materials: Internet and Intranet documents combined with EuCARD2, Description of Work FP7 EuCARD-2 DoW-312453, 2013-02-13, and discussions and preparatory materials worked on by Eucard-2 initiators.
A new communications technique for the nonvocal person, using the Apple II Computer.
Seamone, W
1982-01-01
The purpose of this paper is to describe a technique for nonvocal personal communication for the severely handicapped person, using the Apple II computer system and standard commercially available software diskettes (Visi-Calc). The user's input in a pseudo-Morse code is generated via minute chin motions or limited finger motions applied to a suitable configured two-switch device, and input via the JHU/APL Morse code interface card. The commands and features of the program's row-column matrix, originally intended and widely used for financial management, are used here to call up and modify a large array of stored sentences which can be useful in personal communication. It is not known at this time if the system is in fact cost-effective for the sole purpose of nonvocal communication, since system tradeoff studies have not been made relative to other techniques. However, in some instances an Apple computer may be already available for other purposes at the institution or in the home, and the system described could simply be another utilization of that personal computer. In any case, the system clearly does not meet the requirement of portability. No special components (except for the JHU/APL Morse interface card) and no special programming experience are required to duplicate the communications technique described.
A universal computer control system for motors
NASA Technical Reports Server (NTRS)
Szakaly, Zoltan F. (Inventor)
1991-01-01
A control system for a multi-motor system such as a space telerobot, having a remote computational node and a local computational node interconnected with one another by a high speed data link is described. A Universal Computer Control System (UCCS) for the telerobot is located at each node. Each node is provided with a multibus computer system which is characterized by a plurality of processors with all processors being connected to a common bus, and including at least one command processor. The command processor communicates over the bus with a plurality of joint controller cards. A plurality of direct current torque motors, of the type used in telerobot joints and telerobot hand-held controllers, are connected to the controller cards and responds to digital control signals from the command processor. Essential motor operating parameters are sensed by analog sensing circuits and the sensed analog signals are converted to digital signals for storage at the controller cards where such signals can be read during an address read/write cycle of the command processing processor.
Common Badging and Access Control System (CBACS)
NASA Technical Reports Server (NTRS)
Dischinger, Portia
2005-01-01
This slide presentation presents NASA's Common Badging and Access Control System. NASA began a Smart Card implementation in January 2004. Following site surveys, it was determined that NASA's badging and access control systems required upgrades to common infrastructure in order to provide flexibly, usability, and return on investment prior to a smart card implantation. Common Badging and Access Control System (CBACS) provides the common infrastructure from which FIPS-201 compliant processes, systems, and credentials can be developed and used.
Boo! Outsourcing from the Cataloging Perspective.
ERIC Educational Resources Information Center
Hill, Janet Swan
1998-01-01
Examines long-accepted ways library cataloging departments have used outsourcing (cataloging records, card production, authority control, card filling, and retrospective conversion) and potential outsourcing activities (original cataloging, and copy cataloging). Discusses reasons why outsourcing is controversial. (PEN)
[Groupamatic 360 C1 and automated blood donor processing in a transfusion center].
Guimbretiere, J; Toscer, M; Harousseau, H
1978-03-01
Automation of donor management flow path is controlled by: --a 3 slip "port a punch" card, --the groupamatic unit with a result sorted out on punch paper tape, --the management computer off line connected to groupamatic. Data tracking at blood collection time is made by punching a card with the donor card used as a master card. Groupamatic performs: --a standard blood grouping with one run for registered donors and two runs for new donors, --a phenotyping with two runs, --a screening of irregular antibodies. Themanagement computer checks the correlation between the data of the two runs or the data of a single run and that of previous file. It updates the data resident in the central file and prints out: --the controls of the different blood group for the red cell panel, --The listing of error messages, --The listing of emergency call up, --The listing of collected blood units when arrived at the blood center, with quantitative and qualitative information such as: number of blood, units collected, donor addresses, etc., --Statistics, --Donor cards, --Diplomas.
Determinants affecting consumer adoption of contactless credit card: an empirical study.
Wang, Yu-Min
2008-12-01
The contactless credit card is one of the most promising technological innovations in the field of electronic payments. It provides consumers with greater control of payments, convenience, and transaction speed. However, contactless credit cards have yet to gain significant rates of adoption in the marketplace. Thus, effort must be made to identify factors affecting consumer adoption of contactless credit cards. Based on the technology acceptance model, innovation diffusion theory, and the relevant literature, seven variables (perceived usefulness, perceived ease of use, compatibility, perceived risk, trust, consumer involvement, availability of infrastructure) are proposed to help predict consumer adoption of contactless credit cards. Data collected from 312 respondents in Taiwan is tested against the proposed prediction model using the logistic regression approach. The results and implications of our study contribute to an expanded understanding of the factors that affect consumer adoption of contactless credit cards.
Fabrication of Cantilever-Bump Type Si Probe Card
NASA Astrophysics Data System (ADS)
Park, Jeong-Yong; Lee, Dong-Seok; Kim, Dong-Kwon; Lee, Jong-Hyun
2000-12-01
Probe card is most important part in the test system which selects the good or bad chip of integrated circuit (IC) chips. Silicon vertical probe card is able to test multiple semiconductor chips simultaneously. We presented cantilever-bump type vertical probe card. It was fabricated by dry etching using RIE(reactive ion etching) technique and porous silicon micromachining using silicon direct bonded (SDB) wafer. Cantilevers and bumps were fabricated by isotropic etching using RIE@. 3-dimensional structures were formed by porous silicon micromachining technique using SDB wafer. Contact resistance of fabricated probe card was less than 2 Ω and its life time was more than 200,000 turns. The process used in this work is very simple and reproducible, which has good controllability in the tip dimension and spacing. It is expected that the fabricated probe card can reduce testing time, can promote productivity and enables burn-in test.
The role of optics in secure credentials
NASA Astrophysics Data System (ADS)
Lichtenstein, Terri L.
2006-02-01
The global need for secure ID credentials has grown rapidly over the last few years. This is evident both in government and commercial sectors. Governmental programs include national ID card programs, permanent resident cards for noncitizens, biometric visas or border crossing cards, foreign worker ID programs and secure vehicle registration programs. The commercial need for secure credentials includes secure banking and financial services, security and access control systems and digital healthcare record cards. All of these programs necessitate the use of multiple tamper and counterfeit resistant features for credential authentication and cardholder verification. It is generally accepted that a secure credential should include a combination of overt, covert and forensic security features. The LaserCard optical memory card is a proven example of a secure credential that uses a variety of optical features to enhance its counterfeit resistance and reliability. This paper will review those features and how they interact to create a better credential.
NASA Technical Reports Server (NTRS)
Cecil, R. W.; White, R. A.; Szczur, M. R.
1972-01-01
The IDAMS Processor is a package of task routines and support software that performs convolution filtering, image expansion, fast Fourier transformation, and other operations on a digital image tape. A unique task control card for that program, together with any necessary parameter cards, selects each processing technique to be applied to the input image. A variable number of tasks can be selected for execution by including the proper task and parameter cards in the input deck. An executive maintains control of the run; it initiates execution of each task in turn and handles any necessary error processing.
Di Pasquale, Giuseppe; Mathieu, Giovanni; Maggioni, Aldo Pietro; Fabbri, Gianna; Lucci, Donata; Vescovo, Giorgio; Pirelli, Salvatore; Chiarella, Francesco; Scherillo, Marino; Gulizia, Michele Massimo; Gussoni, Gualberto; Colombo, Fabrizio; Panuccio, Domenico; Nozzoli, Carlo; Berisso, Massimo Zoni
2013-09-10
Atrial fibrillation (AF) is associated with a high risk of stroke and mortality. To describe the difference in AF management of patients (pts) referred to Cardiology (CARD) or Internal Medicine (MED) units in Italy. From May to July 2010, 360 centers enrolled 7148 pts (54% in CARD and 46% in MED). Median age was 77 years (IQR 70-83). Hypertension was the most prevalent associated condition, followed by hypercholesterolemia (28.9%), heart failure (27.7%) and diabetes (24.3%). MED pts were older, more frequently females and more often with comorbidities than CARD pts. In the 4845 pts with nonvalvular AF, a CHADS2 score ≥ 2 was present in 53.0% of CARD vs 75.3% of MED pts (p<.0001). Oral anticoagulants (OAC) were prescribed in 64.2% of CARD vs 46.3% of MED pts (p<.0001); OAC prescription rate was 49.6% in CHADS2 0 and 56.2% in CHADS2 score ≥ 2 pts. At the adjusted analysis patients managed in MED had a significantly lower probability to be treated with OAC. Rate control strategy was pursued in 51.4% of the pts (60.5% in MED and 43.6% in CARD) while rhythm control was the choice in 39.8% of CARD vs 12.9% of MED pts (p<.0001). Cardiologists and internists seem to manage pts with large epidemiological differences. Both CARD and MED specialists currently fail to prescribe OAC in accordance with stroke risk. Patients managed by MED specialists have a lower probability to receive an OAC treatment, irrespective of the severity of clinical conditions. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.
Buccal DNA collection: comparison of buccal swabs with FTA cards.
Milne, Elizabeth; van Bockxmeer, Frank M; Robertson, Laila; Brisbane, Joanna M; Ashton, Lesley J; Scott, Rodney J; Armstrong, Bruce K
2006-04-01
Collection and analysis of DNA, most commonly from blood or buccal cells, is becoming more common in epidemiologic studies. Buccal samples, which are painless to take and relatively easily collected, are often the preferred source. There are several buccal cell collection methods: swabs, brushes, mouthwash, and treated cards, such as FTA or IsoCode cards. Few studies have systematically compared methods of buccal cell collection with respect to DNA yield and amplification success under similar conditions. We compared buccal DNA collection and amplification using buccal swabs and FTA cards in 122 control subjects from our Australian case-control study of childhood acute lymphoblastic leukaemia. Buccal DNA was quantified using a real-time PCR for beta-actin and genotyped at the loci of three polymorphisms (MTHFR 677C>T, ACE I/D, and XPD 1012G>A). PCR was successful with DNA from buccal swabs for 62% to 89% of subjects and from FTA cards for 83% to 100% of subjects, depending on the locus. The matched pair odds ratios (95% confidence interval) comparing success of FTA cards with buccal swabs are as follows: MTHFR 677C>T using PCR-RFLP, 12.5 (11.6-13.5) and using real-time PCR, 130.0 (113.1-152.8); ACE I/D using PCR-amplified fragment length polymorphism, 3.36 (3.2-3.5); XPD 1012G>A using real-time PCR, 150.0 (132.7-172.3). FTA cards are a robust DNA collection method and generally produce DNA suitable for PCR more reliably than buccal swabs. There are, however, technical challenges in handling discs punched from FTA cards that intending users should be aware of.
Lee, Sung Won; Lee, Shin Seok; Oh, Dong Ho; Park, Dong Jin; Kim, Hyun Sook; Choi, Jung Ran; Chae, Soo Cheon; Yun, Ki Jung; Chung, Won Tae; Choe, Jung Yoon; Kim, Seong Kyu
2016-10-01
The aim of this study was to determine the association between P2X7R rs3751142 and CARD8 rs2043211 polymorphisms and gout susceptibility in male Korean subjects. This study enrolled a total of 242 male patients with gout and 280 healthy controls. The polymorphisms of two individual genes including rs3751142(C>A) in the P2X7R gene and rs2043211(A>T) in the CARD8 gene were assessed using Taq-Man analysis. Statistical analyses were performed using the Chi-square test, Kruskal-Wallis test, and logistic regression analyses. A difference in genotypic frequency of the P2X7R rs3751142 and CARD8 rs2043211 genes was not detected between gout and control patients. Clinical parameters including age, onset age, disease duration, body mass index, and serum uric acid levels were not different among the three genotypes for either P2X7R or CARD8 (P > 0.05 for all). A pair-wise comparison of P2X7R rs3751142 and CARD8 rs2043211 genotype combinations revealed that subjects with the CA P2X7R rs3751142 genotype and the TT CARD8 rs2043211 genotype had a trend toward a higher risk of gout compared to the CC/AA combination (P = 0.056, OR = 2.618, 95% CI 0.975 - 7.031). In conclusion, this study revealed that genetic variability of the P2X7R rs3751142 and CARD8 rs2043211 genes might, in part, be associated with susceptibility for gout.
Burkhalter, Kristen L; Wiggins, Keenan; Burkett-Cadena, Nathan; Alto, Barry W
2018-05-04
Commercially available assays utilizing antigen or nucleic acid detection chemistries provide options for mosquito control districts to screen their mosquito populations for arboviruses and make timely operational decisions regarding vector control. These assays may be utilized even more advantageously when combined with honey-soaked nucleic acid preservation substrate ('honey card') testing by reducing or replacing the time- and labor-intensive efforts of identifying and processing mosquito pools. We tested artificially inoculated honey cards and cards fed upon individually by West Nile virus (WNV) and Zika virus (ZIKV)-infected mosquitoes with three assays to compare detection rates and the limit of detection for each platform with respect to virus detection of a single infected mosquito and quantify the time interval of virus preservation on the cards. Assays evaluated included CDC protocols for real-time reverse transcriptase polymerase chain reaction (RT-PCR) for WNV and ZIKV, Pro-Lab Diagnostics ProAmpRT WNV loop-mediated amplification (LAMP) and ZIKV LAMP assays, and the Rapid Analyte Measurement Platform (RAMP) WNV assay. Real-time RT-PCR was the most sensitive assay and the most robust to viral RNA degradation over time. To maximize the detection of virus, honey cards should be left in the traps ≤1 d if using LAMP assays and ≤3 d if using real-time RT-PCR to detect viruses from field samples. The WNV RAMP assay, although effective for pool screening, lacks sensitivity required for honey card surveillance. Future studies may determine the minimum number of infectious mosquitoes required to feed on a honey card that would be reliably detected by the LAMP or RAMP assays.
Post-Attack Economic Stabilization Issues for Federal, State, and Local Governments
1985-02-01
workers being transfered from large urban areas to production facilities in areas of lower risk . In another case, rent control staff should be quickly...food supermarkets , which do not universally accept bank cards. 3 0 A requirement will still exist for a large number of credit cards. While there is some...separate system is required for rationing. For example, the increasingly popular automatic teller machine ( ATM ) debit card routinely accesses both a
Martin, J E; Rusch, F R; James, V L; Decker, P J; Trtol, K A
1982-01-01
This investigation examined the effectiveness of picture cues in establishing self-control in the completion of complex meals by mildly and moderately retarded adults. Three participants, who lived in nonsheltered residential settings, were trained to prepare five complex meals. Following a training baseline comprised of pre-instruction, instructional feedback, and trainers' presence, picture recipe cards were introduced in a multiple-baseline fashion. Rapid improvement in the ability of each participant to independently complete each meal when the picture recipe cards were used occurred. A return to baseline for one of the participants demonstrated further self-directed antecedent stimulus control of the picture recipe cards as an effective treatment procedure. A discussion of future areas of research is included.
Levin, David; Aladl, Usaf; Germano, Guido; Slomka, Piotr
2005-09-01
We exploit consumer graphics hardware to perform real-time processing and visualization of high-resolution, 4D cardiac data. We have implemented real-time, realistic volume rendering, interactive 4D motion segmentation of cardiac data, visualization of multi-modality cardiac data and 3D display of multiple series cardiac MRI. We show that an ATI Radeon 9700 Pro can render a 512x512x128 cardiac Computed Tomography (CT) study at 0.9 to 60 frames per second (fps) depending on rendering parameters and that 4D motion based segmentation can be performed in real-time. We conclude that real-time rendering and processing of cardiac data can be implemented on consumer graphics cards.
MISSILE DATCOM User’s Manual - 2011 Revision
2011-03-01
out. This control card is effective only for the case in which it appears. The following data will be computed and output: Table 24. Magnus ...SOSE, SUPBOD Dynamic derivatives BDAMP, DAMP2 BDAMP, DAMP2 Magnus derivatives SPIN83, DAMP2 SPIN83, DAMP2 Plume effects BOTCNM, BOTCA, BASPRS... Magnus derivatives calculated with SPIN Control Card .................................................. 59 Table 25. Dictionary listing for the FOR020
Clipman, Steven J; Henderson-Frost, Josephine; Fu, Katherine Y; Bern, Caryn; Flores, Jorge; Gilman, Robert H
2018-01-01
About 20-30% of people infected with Chagas disease present with chronic Chagas cardiomyopathy (CCC), the most serious and frequent manifestation of the disease, while others remain asymptomatic and often do not experience Chagas-specific mortality. It is not currently well understood what causes these differential disease outcomes, but a genetic predisposition within the host could play an important role. This study examined variants in the NLRP1, CARD, and CASP1 inflammasome genes among 62 T. cruzi seropositive patients from Bolivia (38 cases with CCC and 24 asymptomatic controls) to uncover associations with CCC. All subjects underwent a complete medical examination including electrocardiogram (EKG) and echocardiogram. After genotype calling and quality control filtering with exclusion of 3 cases and 3 controls, association analysis was performed across 76 directly genotyped SNPs in NLRP1, CARD, and CASP1 genes, adjusting for age, sex, and population stratification. One SNP (rs11651270; Bonferroni-corrected p = 0.036) corresponding to a missense mutation in NLPR1 was found to be significant after adjustment for multiple testing, and a suggestive association was seen in CARD11 (rs6953573; Bonferroni-corrected p = 0.060). Although limited by sample size, the study results suggest variations in the inflammasome, particularly in NLRP1 and CARD11, may be associated with CCC.
Henderson-Frost, Josephine; Fu, Katherine Y.; Bern, Caryn; Flores, Jorge; Gilman, Robert H.
2018-01-01
About 20–30% of people infected with Chagas disease present with chronic Chagas cardiomyopathy (CCC), the most serious and frequent manifestation of the disease, while others remain asymptomatic and often do not experience Chagas-specific mortality. It is not currently well understood what causes these differential disease outcomes, but a genetic predisposition within the host could play an important role. This study examined variants in the NLRP1, CARD, and CASP1 inflammasome genes among 62 T. cruzi seropositive patients from Bolivia (38 cases with CCC and 24 asymptomatic controls) to uncover associations with CCC. All subjects underwent a complete medical examination including electrocardiogram (EKG) and echocardiogram. After genotype calling and quality control filtering with exclusion of 3 cases and 3 controls, association analysis was performed across 76 directly genotyped SNPs in NLRP1, CARD, and CASP1 genes, adjusting for age, sex, and population stratification. One SNP (rs11651270; Bonferroni-corrected p = 0.036) corresponding to a missense mutation in NLPR1 was found to be significant after adjustment for multiple testing, and a suggestive association was seen in CARD11 (rs6953573; Bonferroni-corrected p = 0.060). Although limited by sample size, the study results suggest variations in the inflammasome, particularly in NLRP1 and CARD11, may be associated with CCC. PMID:29438387
SPAR demonstration problems. [for stress analysis
NASA Technical Reports Server (NTRS)
Yen, C. L.; Moore, R. A.; Whetstone, W. D.
1974-01-01
A series of examples are presented to indicate some of the principal functions of the SPAR system and to illustrate SPAR's control card-data card structure. Information in the following categories is given: (1) a description of the problem and, in most cases, comparisons with analytical solutions; (2) a list of the input cards; (3) a printout of the table of contents of the direct access library into which all SPAR output was directed; and (4) a few representative plots.
History of Satellite Orbit Determination at NSWCDD
2018-01-31
run . Segment 40 did pass editing and its use was optional after Segment 20. Segment 30 needed to be run before Segment 80. Segment 70 was run as...control cards required to run the program. These included a CHARGE card related to usage charges and various REQUEST, ATTACH, and CATALOG cards...each) could be done in a single run after the long-arc solution had converged. These short arcs used the pass matrices from the long-arc run in their
1980-12-01
Cards. Each activation of the XXXX Subprogram (XXXX=SAVE, LIBR, DISP, UNIV, SEXT , or ALLO) is associated with a certain group of DATA Cards which we...run Figure 40. The structure of the SIRIUS Data Card Package. AAAA, BBBB, .... ZZZZ replace any of SAVE, LIBR, DISP, UNIV, SEXT , ALLO. -95- The...in respect to constraining the fitted parameters. For M6ssbauer spectra containing several sextets the SEXT subprogram can be recommended. The ALLO
Front-end electronics for PWO-based PHOS calorimeter of ALICE
NASA Astrophysics Data System (ADS)
Muller, Hans; Budnikov, Dmitry; Ippolitov, Mikhail; Li, Qingxia; Manko, Vladislav; Pimenta, Rui; Rohrich, Dieter; Sibiryak, Iouri; Skaali, Bernhard; Vinogradov, Alexandre
2006-11-01
The electromagnetic Photon Spectrometer (PHOS) of ALICE consists of five modules with 56×64 PWO crystals, operated at -25 °C. Glued to each crystal are APD diodes which amplify a lightyield of 4.4 photoelectrons/MeV, followed by charge-sensitive pre-amplifiers with a charge conversion gain of ca. 1 V/pC. We describe our new 32-channel shaper/digitizer and readout electronics for gain-programmable photodiodes. These Front-End Electronics (FEE) cards are installed below the crystals in an isolated warm volume in geometrical correspondence to 2×16 crystal rows per card. With a total detector capacitance of 100 pF and a noise level of 3 MeV, the FEEs cover a 14 bit dynamic range from 5 MeV to 80 GeV. The low noise level is achieved by operating the APDs and preamplifiers at low temperature and by applying a relatively long shaping time of 1 μs. The offline timing resolution, obtained via a Gamma-2 fit is less than 2 ns. The second-order, dual-gain shapers produce semi-Gaussian output for 10 bit ADCs with embedded multi-event buffers. A Readout Control Unit (RCU) masters data readout with address-mapped access to the event-buffers and controls registers via a custom bus which interconnects up to 14 FEE cards. Programmable bias voltage controllers on the FEE cards allow for very precise gain adjustment of each individual APD. Being co-designed with the TRU trigger cards, each FEE card generates eight fast signal sums (2×2 crystals) as input to the TRU. FPGA-based algorithms generate level-0 and level-1 trigger decisions at 40 MHz and allow PHOS also to operate in self-triggered mode. Inside each PHOS module there are 112 FEE and 8 TRU cards which dissipate ca. 1 kW heat which is extracted via a water cooling system.
From cookies to carrots; the effect of inhibitory control training on children's snack selections.
Porter, L; Bailey-Jones, C; Priudokaite, G; Allen, S; Wood, K; Stiles, K; Parvin, O; Javaid, M; Verbruggen, F; Lawrence, N S
2018-05-01
Children consume too much sugar and not enough fruit and vegetables, increasing their risk of adverse health outcomes. Inhibitory control training (ICT) reduces children's and adults' intake of energy-dense foods in both laboratory and real-life settings. However, no studies have yet examined whether ICT can increase healthy food choice when energy-dense options are also available. We investigated whether a food-specific Go/No-Go task could influence the food choices of children aged 4-11, as measured by a hypothetical food choice task using healthy and unhealthy food images printed on cards. Participants played either an active game (healthy foods = 100% go, unhealthy foods = 100% no-go; Studies 1 & 2), a food control game (both healthy and unhealthy foods = 50% go, 50% no-go; Studies 1 & 2) or a non-food control game (sports equipment = 100% go, technology = 100% no-go; Study 2 only) followed by the choice task. In Study 2, food card choices were also measured before training to examine change in choices. A post-training real food choice task was added to check that choices made in the card-based task were representative of choices made when faced with real healthy and unhealthy foods. Overall, the active group chose the greatest number of healthy food cards. Study 2 confirmed that this was due to increases in healthy food card choice in this group only. Active group participants chose a greater number of healthy foods in the real food choice task compared to children in the non-food control group only. The results are discussed with reference to methodological issues and the development of future healthy eating interventions. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.
Design of virtual display and testing system for moving mass electromechanical actuator
NASA Astrophysics Data System (ADS)
Gao, Zhigang; Geng, Keda; Zhou, Jun; Li, Peng
2015-12-01
Aiming at the problem of control, measurement and movement virtual display of moving mass electromechanical actuator(MMEA), the virtual testing system of MMEA was developed based on the PC-DAQ architecture and the software platform of LabVIEW, and the comprehensive test task such as drive control of MMEA, tests of kinematic parameter, measurement of centroid position and virtual display of movement could be accomplished. The system could solve the alignment for acquisition time between multiple measurement channels in different DAQ cards, then on this basis, the researches were focused on the dynamic 3D virtual display by the LabVIEW, and the virtual display of MMEA were realized by the method of calling DLL and the method of 3D graph drawing controls. Considering the collaboration with the virtual testing system, including the hardware drive, the measurement software of data acquisition, and the 3D graph drawing controls method was selected, which could obtained the synchronization measurement, control and display. The system can measure dynamic centroid position and kinematic position of movable mass block while controlling the MMEA, and the interface of 3D virtual display has realistic effect and motion smooth, which can solve the problem of display and playback about MMEA in the closed shell.
Safeer, Richard; Bowen, Wendy; Maung, Zaw; Lucik, Meg
2018-02-01
The aim of this study was to determine whether the Centers for Disease Control and Prevention Worksite Health ScoreCard (ScoreCard) is an effective vehicle for measuring workplace health promotion programs and causing change in a large employer with multiple entities defined by different physical environments and types of workers. Johns Hopkins Medicine (JHM) representatives completed a baseline ScoreCard for each of their entities. In the subsequent year, improvement of the ScoreCard was tied to leadership performance evaluation. JHM year over year scores were analyzed, along with comparisons to national benchmarks. Eleven of the 12 JHM entities improved their overall score from year one to year two and the JHM enterprise surpassed national benchmarks in year two. Organizations can use the ScoreCard as an effective measurement tool and as a method to improve the number of evidenced-based health promotion strategies provided to their employees.
Managing Information On Technical Requirements
NASA Technical Reports Server (NTRS)
Mauldin, Lemuel E., III; Hammond, Dana P.
1993-01-01
Technical Requirements Analysis and Control Systems/Initial Operating Capability (TRACS/IOC) computer program provides supplemental software tools for analysis, control, and interchange of project requirements so qualified project members have access to pertinent project information, even if in different locations. Enables users to analyze and control requirements, serves as focal point for project requirements, and integrates system supporting efficient and consistent operations. TRACS/IOC is HyperCard stack for use on Macintosh computers running HyperCard 1.2 or later and Oracle 1.2 or later.
Event-Driven Random-Access-Windowing CCD Imaging System
NASA Technical Reports Server (NTRS)
Monacos, Steve; Portillo, Angel; Ortiz, Gerardo; Alexander, James; Lam, Raymond; Liu, William
2004-01-01
A charge-coupled-device (CCD) based high-speed imaging system, called a realtime, event-driven (RARE) camera, is undergoing development. This camera is capable of readout from multiple subwindows [also known as regions of interest (ROIs)] within the CCD field of view. Both the sizes and the locations of the ROIs can be controlled in real time and can be changed at the camera frame rate. The predecessor of this camera was described in High-Frame-Rate CCD Camera Having Subwindow Capability (NPO- 30564) NASA Tech Briefs, Vol. 26, No. 12 (December 2002), page 26. The architecture of the prior camera requires tight coupling between camera control logic and an external host computer that provides commands for camera operation and processes pixels from the camera. This tight coupling limits the attainable frame rate and functionality of the camera. The design of the present camera loosens this coupling to increase the achievable frame rate and functionality. From a host computer perspective, the readout operation in the prior camera was defined on a per-line basis; in this camera, it is defined on a per-ROI basis. In addition, the camera includes internal timing circuitry. This combination of features enables real-time, event-driven operation for adaptive control of the camera. Hence, this camera is well suited for applications requiring autonomous control of multiple ROIs to track multiple targets moving throughout the CCD field of view. Additionally, by eliminating the need for control intervention by the host computer during the pixel readout, the present design reduces ROI-readout times to attain higher frame rates. This camera (see figure) includes an imager card consisting of a commercial CCD imager and two signal-processor chips. The imager card converts transistor/ transistor-logic (TTL)-level signals from a field programmable gate array (FPGA) controller card. These signals are transmitted to the imager card via a low-voltage differential signaling (LVDS) cable assembly. The FPGA controller card is connected to the host computer via a standard peripheral component interface (PCI).
The adaptor molecule CARD9 is essential for tuberculosis control
Dorhoi, Anca; Desel, Christiane; Yeremeev, Vladimir; Pradl, Lydia; Brinkmann, Volker; Mollenkopf, Hans-Joachim; Hanke, Karin; Gross, Olaf; Ruland, Jürgen
2010-01-01
The cross talk between host and pathogen starts with recognition of bacterial signatures through pattern recognition receptors (PRRs), which mobilize downstream signaling cascades. We investigated the role of the cytosolic adaptor caspase recruitment domain family, member 9 (CARD9) in tuberculosis. This adaptor was critical for full activation of innate immunity by converging signals downstream of multiple PRRs. Card9−/− mice succumbed early after aerosol infection, with higher mycobacterial burden, pyogranulomatous pneumonia, accelerated granulocyte recruitment, and higher abundance of proinflammatory cytokines and granulocyte colony-stimulating factor (G-CSF) in serum and lung. Neutralization of G-CSF and neutrophil depletion significantly prolonged survival, indicating that an exacerbated systemic inflammatory disease triggered lethality of Card9−/− mice. CARD9 deficiency had no apparent effect on T cell responses, but a marked impact on the hematopoietic compartment. Card9−/− granulocytes failed to produce IL-10 after Mycobaterium tuberculosis infection, suggesting that an absent antiinflammatory feedback loop accounted for granulocyte-dominated pathology, uncontrolled bacterial replication, and, ultimately, death of infected Card9−/− mice. Our data provide evidence that deregulated innate responses trigger excessive lung inflammation and demonstrate a pivotal role of CARD9 signaling in autonomous innate host defense against tuberculosis. PMID:20351059
The automated multi-stage substructuring system for NASTRAN
NASA Technical Reports Server (NTRS)
Field, E. I.; Herting, D. N.; Herendeen, D. L.; Hoesly, R. L.
1975-01-01
The substructuring capability developed for eventual installation in Level 16 is now operational in a test version of NASTRAN. Its features are summarized. These include the user-oriented, Case Control type control language, the automated multi-stage matrix processing, the independent direct access data storage facilities, and the static and normal modes solution capabilities. A complete problem analysis sequence is presented with card-by-card description of the user input.
Progress Toward a Format Standard for Flight Dynamics Models
NASA Technical Reports Server (NTRS)
Jackson, E. Bruce; Hildreth, Bruce L.
2006-01-01
In the beginning, there was FORTRAN, and it was... not so good. But it was universal, and all flight simulator equations of motion were coded with it. Then came ACSL, C, Ada, C++, C#, Java, FORTRAN-90, Matlab/Simulink, and a number of other programming languages. Since the halcyon punch card days of 1968, models of aircraft flight dynamics have proliferated in training devices, desktop engineering and development computers, and control design textbooks. With the rise of industry teaming and increased reliance on simulation for procurement decisions, aircraft and missile simulation models are created, updated, and exchanged with increasing frequency. However, there is no real lingua franca to facilitate the exchange of models from one simulation user to another. The current state-of-the-art is such that several staff-months if not staff-years are required to 'rehost' each release of a flight dynamics model from one simulation environment to another one. If a standard data package or exchange format were to be universally adopted, the cost and time of sharing and updating aerodynamics, control laws, mass and inertia, and other flight dynamic components of the equations of motion of an aircraft or spacecraft simulation could be drastically reduced. A 2002 paper estimated over $ 6 million in savings could be realized for one military aircraft type alone. This paper describes the efforts of the American Institute of Aeronautics and Astronautics (AIAA) to develop a standard flight dynamic model exchange standard based on XML and HDF-5 data formats.
Wang, Ke; Nirmalathas, Ampalavanapillai; Lim, Christina; Skafidas, Efstratios; Alameh, Kamal
2013-07-01
In this paper, we propose and experimentally demonstrate a free-space based high-speed reconfigurable card-to-card optical interconnect architecture with broadcast capability, which is required for control functionalities and efficient parallel computing applications. Experimental results show that 10 Gb/s data can be broadcast to all receiving channels for up to 30 cm with a worst-case receiver sensitivity better than -12.20 dBm. In addition, arbitrary multicasting with the same architecture is also investigated. 10 Gb/s reconfigurable point-to-point link and multicast channels are simultaneously demonstrated with a measured receiver sensitivity power penalty of ~1.3 dB due to crosstalk.
Materials safety data sheets the basis for control of toxic chemicals. Volume II
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bolton, N. E.; Ketchen, E. E.; Porter, W. E.
For large industrial and research operations, maintaining reasonable control of all toxic materials used in their operations can be a formidable task. A system utilizing cards has been developed that serves a dual purpose, informing the user regarding hazards of a particular material and also facilitating appropriate workplace surveillance during its use. Selected data, including threshold limit values, routes of absorption, symptoms of exposure, chronic effects, and emergency first-aid procedures, are printed on the card. A portion of the card contains the label that the user detaches and affixes to the container. This label classifies the material according to flammability,more » toxicity, reactivity, and special properties on a 0 through 4 hazard rating system. This report describes the development and use of such cards, contains the associated Toxic Material Data Sheets that provide full backup data for the labels, and furnishes a glossary of biomedical terms used in the Data Sheets.« less
Carded Tow Real-Time Color Assessment: A Spectral Camera-Based System.
Furferi, Rocco; Governi, Lapo; Volpe, Yary; Carfagni, Monica
2016-08-31
One of the most important parameters to be controlled during the production of textile yarns obtained by mixing pre-colored fibers, is the color correspondence between the manufactured yarn and a given reference, usually provided by a designer or a customer. Obtaining yarns from raw pre-colored fibers is a complex manufacturing process entailing a number of steps such as laboratory sampling, color recipe corrections, blowing, carding and spinning. Carding process is the one devoted to transform a "fuzzy mass" of tufted fibers into a regular mass of untwisted fibers, named "tow". During this process, unfortunately, the correspondence between the color of the tow and the target one cannot be assured, thus leading to yarns whose color differs from the one used for reference. To solve this issue, the main aim of this work is to provide a system able to perform a spectral camera-based real-time measurement of a carded tow, to assess its color correspondence with a reference carded fabric and, at the same time, to monitor the overall quality of the tow during the carding process. Tested against a number of differently colored carded fabrics, the proposed system proved its effectiveness in reliably assessing color correspondence in real-time.
Potrich, Michele; Alves, Luis F A; Haas, Jucelaine; Da Silva, Everton R L; Daros, Alaxsandra; Pietrowski, Vanda; Neves, Pedro M O J
2009-01-01
Trichogramma pretiosum Riley and the entomopathogenic fungi Beauveria bassiana and Metarhizium anisopliae are efficient biological control agents and are thought to be used jointly. In here, we investigated if these entomopathogens could have any side-effects on T. pretiosum. Therefore, 1 x 8 cards containing sterilized eggs of Anagasta kuehniella (Zeller) that were sprayed with 0.2 ml of B. bassiana or M. anisopliae (1.0 x 10(9) conidia/ml) were offered to a T. pretiosum female for 24h (30 cards/fungus = 30 replicates). Afterwards, females were isolated in glass tubes. The control group was sprayed with sterile distillated water + Tween 80 (0.01%). In addition, 60 cards with sterilized eggs of A. kuehniella were submitted to parasitism by females of T. pretiosum for 24h. Of these cards, 30 were sprayed with B. bassiana or M. anisopliae and 30 with distillated water + Tween 80 (0.01%), and observed daily until parasitoid emergence. Metarhizium anisopliae decreased parasitoid emergence and caused confirmed mortality. Therefore, field and semi-field experiments should be conducted for a final assessment of the side-effects of these entomopathogens on Trichogramma as a ways to develop a control strategy in which both can be used.
High performance MRI simulations of motion on multi-GPU systems.
Xanthis, Christos G; Venetis, Ioannis E; Aletras, Anthony H
2014-07-04
MRI physics simulators have been developed in the past for optimizing imaging protocols and for training purposes. However, these simulators have only addressed motion within a limited scope. The purpose of this study was the incorporation of realistic motion, such as cardiac motion, respiratory motion and flow, within MRI simulations in a high performance multi-GPU environment. Three different motion models were introduced in the Magnetic Resonance Imaging SIMULator (MRISIMUL) of this study: cardiac motion, respiratory motion and flow. Simulation of a simple Gradient Echo pulse sequence and a CINE pulse sequence on the corresponding anatomical model was performed. Myocardial tagging was also investigated. In pulse sequence design, software crushers were introduced to accommodate the long execution times in order to avoid spurious echoes formation. The displacement of the anatomical model isochromats was calculated within the Graphics Processing Unit (GPU) kernel for every timestep of the pulse sequence. Experiments that would allow simulation of custom anatomical and motion models were also performed. Last, simulations of motion with MRISIMUL on single-node and multi-node multi-GPU systems were examined. Gradient Echo and CINE images of the three motion models were produced and motion-related artifacts were demonstrated. The temporal evolution of the contractility of the heart was presented through the application of myocardial tagging. Better simulation performance and image quality were presented through the introduction of software crushers without the need to further increase the computational load and GPU resources. Last, MRISIMUL demonstrated an almost linear scalable performance with the increasing number of available GPU cards, in both single-node and multi-node multi-GPU computer systems. MRISIMUL is the first MR physics simulator to have implemented motion with a 3D large computational load on a single computer multi-GPU configuration. The incorporation of realistic motion models, such as cardiac motion, respiratory motion and flow may benefit the design and optimization of existing or new MR pulse sequences, protocols and algorithms, which examine motion related MR applications.
Report: EPA's Fiscal Year 2015 Purchase Card and Convenience Check Program Assessed as Low Risk
Report #16-P-0124, March 29, 2016. We determined the EPA's purchase card and convenience check program for FY 2015 to be at a low risk for illegal, improper or erroneous purchases and payments due to strengthened internal controls.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-15
... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0548] Proposed Information Collection (Board of Veterans' Appeals Customer Satisfaction With Hearing Survey Card) Activity; Comment Request AGENCY... information technology. Title: Board of Veterans' Appeals Customer Satisfaction with Hearing Survey Card, VA...
Gutierrez, Arnel F.
2014-01-01
The complex concepts and vocabulary of biology classes discourage many students. In this study, a pretest–posttest model was used to test the effectiveness of an educational card game in reinforcing biological concepts in comparison with traditional teaching methods. The subjects of this study were two biology classes at Bulacan State University–Sarmiento Campus. Both classes received conventional instruction; however, the experimental group's instruction was supplemented with the card game, while the control group's instruction was reinforced with traditional exercises and assignments. The score increases from pretest to posttest showed that both methods effectively reinforced biological concepts, but a t test showed that the card game is more effective than traditional teaching methods. Additionally, students from the experimental group evaluated the card game using five criteria: goals, design, organization, playability, and usefulness. The students rated the material very satisfactory. PMID:24591506
Gutierrez, Arnel F
2014-01-01
The complex concepts and vocabulary of biology classes discourage many students. In this study, a pretest-posttest model was used to test the effectiveness of an educational card game in reinforcing biological concepts in comparison with traditional teaching methods. The subjects of this study were two biology classes at Bulacan State University-Sarmiento Campus. Both classes received conventional instruction; however, the experimental group's instruction was supplemented with the card game, while the control group's instruction was reinforced with traditional exercises and assignments. The score increases from pretest to posttest showed that both methods effectively reinforced biological concepts, but a t test showed that the card game is more effective than traditional teaching methods. Additionally, students from the experimental group evaluated the card game using five criteria: goals, design, organization, playability, and usefulness. The students rated the material very satisfactory.
Security Enhanced EMV-Based Mobile Payment Protocol
2014-01-01
Near field communication has enabled customers to put their credit cards into a smartphone and use the phone for credit card transaction. But EMV contactless payment allows unauthorized readers to access credit cards. Besides, in offline transaction, a merchant's reader cannot verify whether a card has been revoked. Therefore, we propose an EMV-compatible payment protocol to mitigate the transaction risk. And our modifications to the EMV standard are transparent to merchants and users. We also encrypt the communications between a card and a reader to prevent eavesdropping on sensitive data. The protocol is able to resist impersonation attacks and to avoid the security threats in EMV. In offline transactions, our scheme requires a user to apply for a temporary offline certificate in advance. With the certificate, banks no longer need to lower customer's credits for risk control, and users can have online-equivalent credits in offline transactions. PMID:25302334
Security enhanced EMV-based mobile payment protocol.
Yang, Ming-Hour
2014-01-01
Near field communication has enabled customers to put their credit cards into a smartphone and use the phone for credit card transaction. But EMV contactless payment allows unauthorized readers to access credit cards. Besides, in offline transaction, a merchant's reader cannot verify whether a card has been revoked. Therefore, we propose an EMV-compatible payment protocol to mitigate the transaction risk. And our modifications to the EMV standard are transparent to merchants and users. We also encrypt the communications between a card and a reader to prevent eavesdropping on sensitive data. The protocol is able to resist impersonation attacks and to avoid the security threats in EMV. In offline transactions, our scheme requires a user to apply for a temporary offline certificate in advance. With the certificate, banks no longer need to lower customer's credits for risk control, and users can have online-equivalent credits in offline transactions.
The self-attribution bias and paranormal beliefs.
van Elk, Michiel
2017-03-01
The present study investigated the relation between paranormal beliefs, illusory control and the self-attribution bias, i.e., the motivated tendency to attribute positive outcomes to oneself while negative outcomes are externalized. Visitors of a psychic fair played a card guessing game and indicated their perceived control over randomly selected cards as a function of the congruency and valence of the card. A stronger self-attribution bias was observed for paranormal believers compared to skeptics and this bias was specifically related to traditional religious beliefs and belief in superstition. No relation between paranormal beliefs and illusory control was found. Self-report measures indicated that paranormal beliefs were associated to being raised in a spiritual family and to anomalous experiences during childhood. Thereby this study suggests that paranormal beliefs are related to specific cognitive biases that in turn are shaped by socio-cultural factors. Copyright © 2017 Elsevier Inc. All rights reserved.
Rare and Common Variants in CARD14, Encoding an Epidermal Regulator of NF-kappaB, in Psoriasis
Jordan, Catherine T.; Cao, Li; Roberson, Elisha D.O.; Duan, Shenghui; Helms, Cynthia A.; Nair, Rajan P.; Duffin, Kristina Callis; Stuart, Philip E.; Goldgar, David; Hayashi, Genki; Olfson, Emily H.; Feng, Bing-Jian; Pullinger, Clive R.; Kane, John P.; Wise, Carol A.; Goldbach-Mansky, Raphaela; Lowes, Michelle A.; Peddle, Lynette; Chandran, Vinod; Liao, Wilson; Rahman, Proton; Krueger, Gerald G.; Gladman, Dafna; Elder, James T.; Menter, Alan; Bowcock, Anne M.
2012-01-01
Psoriasis is a common inflammatory disorder of the skin and other organs. We have determined that mutations in CARD14, encoding a nuclear factor of kappa light chain enhancer in B cells (NF-kB) activator within skin epidermis, account for PSORS2. Here, we describe fifteen additional rare missense variants in CARD14, their distribution in seven psoriasis cohorts (>6,000 cases and >4,000 controls), and their effects on NF-kB activation and the transcriptome of keratinocytes. There were more CARD14 rare variants in cases than in controls (burden test p value = 0.0015). Some variants were only seen in a single case, and these included putative pathogenic mutations (c.424G>A [p.Glu142Lys] and c.425A>G [p.Glu142Gly]) and the generalized-pustular-psoriasis mutation, c.413A>C (p.Glu138Ala); these three mutations lie within the coiled-coil domain of CARD14. The c.349G>A (p.Gly117Ser) familial-psoriasis mutation was present at a frequency of 0.0005 in cases of European ancestry. CARD14 variants led to a range of NF-kB activities; in particular, putative pathogenic variants led to levels >2.5× higher than did wild-type CARD14. Two variants (c.511C>A [p.His171Asn] and c.536G>A [p.Arg179His]) required stimulation with tumor necrosis factor alpha (TNF-α) to achieve significant increases in NF-kB levels. Transcriptome profiling of wild-type and variant CARD14 transfectants in keratinocytes differentiated probably pathogenic mutations from neutral variants such as polymorphisms. Over 20 CARD14 polymorphisms were also genotyped, and meta-analysis revealed an association between psoriasis and rs11652075 (c.2458C>T [p.Arg820Trp]; p value = 2.1 × 10−6). In the two largest psoriasis cohorts, evidence for association increased when rs11652075 was conditioned on HLA-Cw∗0602 (PSORS1). These studies contribute to our understanding of the genetic basis of psoriasis and illustrate the challenges faced in identifying pathogenic variants in common disease. PMID:22521419
Learning with Multiple Representations: Extending Multimedia Learning beyond the Lab
ERIC Educational Resources Information Center
Eilam, Billie; Poyas, Yael
2008-01-01
The present study extended multimedia learning principles beyond the lab to an ecologically valid setting (homework). Eighteen information cards were used to perform three homework tasks. The control group students learned from single representation (SR) cards that presented all information as printed text. The multiple representation (MR) group…
User's guide to program FLEXSTAB. [aerodynamics
NASA Technical Reports Server (NTRS)
Cavin, R. K., III; Colunga, D.
1975-01-01
A manual is presented for correctly submitting program runs in aerodynamics on the UNIVAC 1108 computer system. All major program modules are included. Control cards are documented for the user's convenience, and card parameters are included in order to provide some idea as to reasonable time estimates for the program modules.
75 FR 80315 - Management of Federal Agency Disbursements
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-22
... Express--Cardholder Satisfaction and Usage Survey, OMB Control No. 1510-0074), 95 percent of Direct... those surveyed said they would recommend the card to a friend or family member who receives Federal...] cardholders may be unaware of important features that promote proper card usage and reduce fees, such as the...
The Michigan Context and Performance Report Card: Public Elementary & Middle Schools, 2013
ERIC Educational Resources Information Center
Spalding, Audrey
2013-01-01
The Michigan Context and Performance Report Card measures school performance by adjusting standardized test scores to account for student background. Comparing schools using unadjusted test scores ignores the significant relationship between academic performance and student socioeconomic background--a dynamic outside a school's control. The…
ERIC Educational Resources Information Center
Kennedy, Mike
2000-01-01
Examines how the use of electronic access-control system enables college and universities to provide a safer environment for students and staff. The advantages of no-key doors, adapting entry card systems for multiple uses, and successfully retaining lock and key systems when facilities do not lend themselves to electronic security are discussed.…
Improving the quality of physician communication with rapid-throughput analysis and report cards.
Farrell, Michael H; Christopher, Stephanie A; La Pean Kirschner, Alison; Roedl, Sara J; O'Tool, Faith O; Ahmad, Nadia Y; Farrell, Philip M
2014-11-01
Problems with clinician-patient communication negatively impact newborn screening, genetics, and all of healthcare. Training programs teach communication, but educational methods are not feasible for entire populations of clinicians. To address this healthcare quality gap, we developed a Communication Quality Assurance intervention. Child health providers volunteered for a randomized controlled trial of assessment and a report card. Participants provided telephone counseling to a standardized parent regarding a newborn screening result showing heterozygous status for cystic fibrosis or sickle cell disease. Our rapid-throughput timeline allows individualized feedback within a week. Two encounters were recorded (baseline and after a random sample received the report card) and abstracted for four groups of communication quality indicators. 92 participants finished both counseling encounters within our rapid-throughput time limits. Participants randomized to receive the report card improved communication behaviors more than controls, including request for teach-back (p<0.01), opening behaviors (p=0.01), anticipate/validate emotion (p<0.001) and the ratio of explained to unexplained jargon words (p<0.03). The rapid-throughput report card is effective at improving specific communication behaviors. Communication can be taught, but this project shows how healthcare organizations can assure communication quality everywhere. Further implementation could improve newborn screening, genetics, and healthcare in general. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
Effects of music therapy and distraction cards on pain relief during phlebotomy in children.
Aydin, Diler; Sahiner, Nejla Canbulat
2017-02-01
To investigate three different distraction methods (distraction cards, listening to music, and distraction cards + music) on pain and anxiety relief in children during phlebotomy. This study was a prospective, randomized, controlled trial. The sample consisted of children aged 7 to 12years who required blood tests. The children were randomized into four groups, distraction cards, music, distraction cards + music, and controls. Data were obtained through face-to-face interviews with the children, their parents, and the observer before and after the procedure. The children's pain levels were assessed and reported by the parents and observers, and the children themselves who self-reported using Wong-Baker FACES. The children's anxiety levels were also assessed using the Children's Fear Scale. Two hundred children (mean age: 9.01±2.35years) were included. No difference was found between the groups in the self, parent, and observer reported procedural pain levels (p=0.72, p=0.23, p=0.15, respectively). Furthermore, no significant differences were observed between groups in procedural child anxiety levels according to the parents and observer (p=0.092, p=0.096, respectively). Pain and anxiety relief was seen in all three methods during phlebotomy; however, no statistically significant difference was observed. Copyright © 2016 Elsevier Inc. All rights reserved.
Loss-of-function CARD8 mutation causes NLRP3 inflammasome activation and Crohn's disease.
Mao, Liming; Kitani, Atsushi; Similuk, Morgan; Oler, Andrew J; Albenberg, Lindsey; Kelsen, Judith; Aktay, Atiye; Quezado, Martha; Yao, Michael; Montgomery-Recht, Kim; Fuss, Ivan J; Strober, Warren
2018-05-01
In these studies, we evaluated the contribution of the NLRP3 inflammasome to Crohn's disease (CD) in a kindred containing individuals having a missense mutation in CARD8, a protein known to inhibit this inflammasome. Whole exome sequencing and PCR studies identified the affected individuals as having a V44I mutation in a single allele of the T60 isoform of CARD8. The serum levels of IL-1β in the affected individuals were increased compared with those in healthy controls, and their peripheral monocytes produced increased amounts of IL-1β when stimulated by NLRP3 activators. Immunoblot studies probing the basis of these findings showed that mutated T60 CARD8 failed to downregulate the NLRP3 inflammasome because it did not bind to NLRP3 and inhibit its oligomerization. In addition, these studies showed that mutated T60 CARD8 exerted a dominant-negative effect by its capacity to bind to and form oligomers with unmutated T60 or T48 CARD8 that impeded their binding to NLRP3. Finally, inflammasome activation studies revealed that intact but not mutated CARD8 prevented NLRP3 deubiquitination and serine dephosphorylation. CD due to a CARD8 mutation was not effectively treated by anti-TNF-α, but did respond to IL-1β inhibitors. Thus, patients with anti-TNF-α-resistant CD may respond to this treatment option.
Structural Insights into DD-Fold Assembly and Caspase-9 Activation by the Apaf-1 Apoptosome.
Su, Tsung-Wei; Yang, Chao-Yu; Kao, Wen-Pin; Kuo, Bai-Jiun; Lin, Shan-Meng; Lin, Jung-Yaw; Lo, Yu-Chih; Lin, Su-Chang
2017-03-07
Death domain (DD)-fold assemblies play a crucial role in regulating the signaling to cell survival or death. Here we report the crystal structure of the caspase recruitment domain (CARD)-CARD disk of the human apoptosome. The structure surprisingly reveals that three 1:1 Apaf-1:procaspase-9 CARD protomers form a novel helical DD-fold assembly on the heptameric wheel-like platform of the apoptosome. The small-angle X-ray scattering and multi-angle light scattering data also support that three protomers could form an oligomeric complex similar to the crystal structure. Interestingly, the quasi-equivalent environment of CARDs could generate different quaternary CARD assemblies. We also found that the type II interaction is conserved in all DD-fold complexes, whereas the type I interaction is found only in the helical DD-fold assemblies. This study provides crucial insights into the caspase activation mechanism, which is tightly controlled by a sophisticated and highly evolved CARD assembly on the apoptosome, and also enables better understanding of the intricate DD-fold assembly. Copyright © 2017 Elsevier Ltd. All rights reserved.
HyperCLIPS: A HyperCard interface to CLIPS
NASA Technical Reports Server (NTRS)
Pickering, Brad; Hill, Randall W., Jr.
1990-01-01
HyperCLIPS combines the intuitive, interactive user interface of the Apple Macintosh(TM) with the powerful symbolic computation of an expert system interpreter. HyperCard(TM) is an excellent environment for quickly developing the front end of an application with buttons, dialogs, and pictures, while the CLIPS interpreter provides a powerful inference engine for complex problem solving and analysis. By integrating HyperCard and CLIPS the advantages and uses of both packages are made available for a wide range of uses: rapid prototyping of knowledge-based expert systems, interactive simulations of physical systems, and intelligent control of hypertext processes, to name a few. Interfacing HyperCard and CLIPS is natural. HyperCard was designed to be extended through the use of external commands (XCMDs), and CLIPS was designed to be embedded through the use of the I/O router facilities and callable interface routines. With the exception of some technical difficulties which will be discussed later, HyperCLIPS implements this interface in a straight forward manner, using the facilities provided. An XCMD called 'ClipsX' was added to HyperCard to give access to the CLIPS routines: clear, load, reset, and run. And an I/O router was added to CLIPS to handle the communication of data between CLIPS and HyperCard.
Carded Tow Real-Time Color Assessment: A Spectral Camera-Based System
Furferi, Rocco; Governi, Lapo; Volpe, Yary; Carfagni, Monica
2016-01-01
One of the most important parameters to be controlled during the production of textile yarns obtained by mixing pre-colored fibers, is the color correspondence between the manufactured yarn and a given reference, usually provided by a designer or a customer. Obtaining yarns from raw pre-colored fibers is a complex manufacturing process entailing a number of steps such as laboratory sampling, color recipe corrections, blowing, carding and spinning. Carding process is the one devoted to transform a “fuzzy mass” of tufted fibers into a regular mass of untwisted fibers, named “tow”. During this process, unfortunately, the correspondence between the color of the tow and the target one cannot be assured, thus leading to yarns whose color differs from the one used for reference. To solve this issue, the main aim of this work is to provide a system able to perform a spectral camera-based real-time measurement of a carded tow, to assess its color correspondence with a reference carded fabric and, at the same time, to monitor the overall quality of the tow during the carding process. Tested against a number of differently colored carded fabrics, the proposed system proved its effectiveness in reliably assessing color correspondence in real-time. PMID:27589765
Kinematics Card Sort Activity: Insight into Students' Thinking
NASA Astrophysics Data System (ADS)
Berryhill, Erin; Herrington, Deborah; Oliver, Keith
2016-12-01
Kinematics is a topic students are unknowingly aware of well before entering the physics classroom. Students observe motion on a daily basis. They are constantly interpreting and making sense of their observations, unintentionally building their own understanding of kinematics before receiving any formal instruction. Unfortunately, when students take their prior conceptions to understand a new situation, they often do so in a way that inaccurately connects their learning. We were motivated to identify strategies to help our students make accurate connections to their prior knowledge and understand kinematics at a deeper level. To do this, we integrated a formative assessment card sort into a kinematic graphing unit within an introductory high school physics course. Throughout the activities, we required students to document and reflect upon their thinking. This allowed their learning to build upon their own previously held conceptual understanding, which provided an avenue for cognitive growth. By taking a more direct approach to eliciting student reasoning, we hoped to improve student learning and guide our assessment of their learning.
31 CFR 594.410 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Credit extended and cards issued by U.S. financial institutions. 594.410 Section 594.410 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL...
31 CFR 546.409 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U.S. financial institutions. 546.409 Section 546.409 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY DARFUR...
Impact of the Shodan Computer Search Engine on Internet-facing Industrial Control System Devices
2014-03-27
bridge implementation. The transparent bridge is designed using a Raspberry Pi configured with Linux IPtables and bridge-utils to bridge the on board...Ethernet card and a second USB Ethernet adapter. A Raspberry Pi is a credit-card-sized single-board computer running a version of Debian Linux. There
PUNCHED CARD SYSTEM NEEDN'T BE COMPLEX TO GIVE COMPLETE CONTROL.
ERIC Educational Resources Information Center
BEMIS, HAZEL T.
AT WORCESTER JUNIOR COLLEGE, MASSACHUSETTS, USE OF A MANUALLY OPERATED PUNCHED CARD SYSTEM HAS RESULTED IN (1) SIMPLIFIED REGISTRATION PROCEDURES, (2) QUICK ANALYSIS OF CONFLICTS AND PROBLEMS IN CLASS SCHEDULING, (3) READY ACCESS TO STATISTICAL INFORMATION, (4) DIRECTORY INFORMATION IN A WIDE RANGE OF CLASSIFICATIONS, (5) EASY VERIFICATION OF…
Wisconsin Card Sorting Test Performance in Children with Developmental Coordination Disorder
ERIC Educational Resources Information Center
Wuang, Yee-Pay; Su, Chwen-Yng; Su, Jui-Hsing
2011-01-01
The primary purpose of this study was to investigate and compare the executive functions measured by the Wisconsin Card Sorting Test (WCST) between children with developmental coordination disorder (DCD) and age-matched normal controls. A second purpose was to examine the relations between executive functions and school functions in DCD children.…
Observation-based training for neuroprosthetic control of grasping by amputees.
Agashe, Harshavardhan A; Contreras-Vidal, Jose L
2014-01-01
Current brain-machine interfaces (BMIs) allow upper limb amputees to position robotic arms with a high degree of accuracy, but lack the ability to control hand pre-shaping for grasping different objects. We have previously shown that low frequency (0.1-1 Hz) time domain cortical activity recorded at the scalp via electroencephalography (EEG) encodes information about grasp pre-shaping. To transfer this technology to clinical populations such as amputees, the challenge lies in constructing BMI models in the absence of overt training hand movements. Here we show that it is possible to train BMI models using observed grasping movements performed by a robotic hand attached to amputees' residual limb. Three transradial amputees controlled the grasping motion of an attached robotic hand via their EEG, following the action-observation training phase. Over multiple sessions, subjects successfully grasped the presented object (a bottle or a credit card) in 53±16 % of trials, demonstrating the validity of the BMI models. Importantly, the validation of the BMI model was through closed-loop performance, which demonstrates generalization of the model to unseen data. These results suggest `mirror neuron system' properties captured by delta band EEG that allows neural representation for action observation to be used for action control in an EEG-based BMI system.
Gema Díaz-Blancat; Juan García-Prieto; Fernando Maestú; Francisco Barceló
2018-05-01
One common assumption has been that prefrontal executive control is mostly required for target detection (Posner and Petersen in Ann Rev Neurosci 13:25-42, 1990). Alternatively, cognitive control has also been related to anticipatory updating of task-set (contextual) information, a view that highlights proactive control processes. Frontoparietal cortical networks contribute to both proactive control and reactive target detection, although their fast dynamics are still largely unexplored. To examine this, we analyzed rapid magnetoencephalographic (MEG) source activations elicited by task cues and target cards in a task-cueing analogue of the Wisconsin Card Sorting Test. A single-task (color sorting) condition with equivalent perceptual and motor demands was used as a control. Our results revealed fast, transient and largely switch-specific MEG activations across frontoparietal and cingulo-opercular regions in anticipation of target cards, including (1) early (100-200 ms) cue-locked MEG signals at visual, temporo-parietal and prefrontal cortices of the right hemisphere (i.e., calcarine sulcus, precuneus, inferior frontal gyrus, anterior insula and supramarginal gyrus); and (2) later cue-locked MEG signals at the right anterior and posterior insula (200-300 ms) and the left temporo-parietal junction (300-500 ms). In all cases larger MEG signal intensity was observed in switch relative to repeat cueing conditions. Finally, behavioral restart costs and test scores of working memory capacity (forward digit span) correlated with cue-locked MEG activations at key nodes of the frontoparietal network. Together, our findings suggest that proactive cognitive control of task rule updating can be fast and transiently implemented within less than a second and in anticipation of target detection.
Data Supporting Mobile Application Development for Use within the Marine Air-Ground Task Force
2015-09-01
Landing Zone (LZ) Brief Maneuver Control Measures Medical Evacuation (MEDEVAC) Request Mission Card Information Obstacle Report Rules of Engagement...2 2 4 3 4 28 Landing%Zone%(LZ)%Brief% 2 3 1 3 4 2 2 3 3 4 27 Mission% Card %Information 3 2 2 3 3 2 2 3 3 3 26 5%Paragraph%Order 3 2 2 2 2 3 4 3 1 2 24...SALUTE, and Mission Card . These constitute what could be identified as a type of reporting application. Within one application, a number of different
Leung, S C; Fung, W K; Wong, K H
1999-01-01
The relative bit density variation graphs of 207 specimen credit cards processed by 12 encoding machines were examined first visually, and then classified by means of hierarchical cluster analysis. Twenty-nine credit cards being treated as 'questioned' samples were tested by way of cluster analysis against 'controls' derived from known encoders. It was found that hierarchical cluster analysis provided a high accuracy of identification with all 29 'questioned' samples classified correctly. On the other hand, although visual comparison of jitter graphs was less discriminating, it was nevertheless capable of giving a reasonably accurate result.
Location Based Application Availability
NASA Astrophysics Data System (ADS)
Naeem Akram, Raja; Markantonakis, Konstantinos; Mayes, Keith
Smart cards are being integrated into a diverse range of industries: ranging from banking, telecom, transport, home/office access control to health and E-passport. Traditionally, cardholders are required to carry a smart card for each application. However, recent developments in the Near Field Communication (NFC) have renewed the interest in multiple applications for different services on a single device. This paper builds onto the NFC initiative and avoids the smart card ownership issues that hinder the adoption of such devices. The proposal integrates the Global Positioning System with the NFC in mobile phones to provide a ubiquitously and flexible service access model.
NASA Technical Reports Server (NTRS)
Hall, William A.
1990-01-01
Slave microprocessors in multimicroprocessor computing system contains modified circuit cards programmed via bus connecting master processor with slave microprocessors. Enables interactive, microprocessor-based, single-loop control. Confers ability to load and run program from master/slave bus, without need for microprocessor development station. Tristate buffers latch all data and information on status. Slave central processing unit never connected directly to bus.
ERIC Educational Resources Information Center
Anderson, Carla; Card, Karen
2015-01-01
The purpose of this quasi-experimental nonequivalent control group study was to determine the influence that a financial education intervention administered in First Year Experience courses had on students' perceptions of their financial behavior such as compulsive spending and credit card use. This study utilized the five-point Likert-type…
12 CFR Appendix M2 to Part 226 - Actual Repayment Disclosures
Code of Federal Regulations, 2010 CFR
2010-01-01
... Disclosures (a) Calculating actual repayment disclosures. (1) Definitions. (i) “Retail credit card” means a credit card that is issued by a retailer that can be used only in transactions with the retailer or a group of retailers that are related by common ownership or control, or a credit card where a retailer...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-14
...: Statement Regarding a Lost or Stolen U.S. Passport Book and/or Card ACTION: Notice of request for public... Information Collection: Statement Regarding a Lost or Stolen U.S. Passport Book and/or Card. OMB Control...: Bureau of Consular Affairs, Passport Services, Office of Program Management and Operational Support...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-01
... card request. The comment period is being extended to provide additional time for interested parties to... times more likely to be flagged as potential trafficking by FNS' fraud detection system. Trafficking is... many first-time users do not understand how to use the card and a grace period in the beginning would...
1988-11-01
264 ANALYSIS RESTART. ............. ..... ....... 269 1.0 TITLE CARD. .............. ............. 271 2.0 CONTROL CARDS...stress soil model will provide a tool for such analysis of waterfront structures. To understand the significance of liquefaction, it is important to note...Implementing this effective stress soil model into a finite element computer program would allow analysis of soil and structure together. TECHNICAL BACKGROUND
What Makes Responses Prepotent for Young Children? Insights from the Grass-Snow Task
ERIC Educational Resources Information Center
Simpson, Andrew; Riggs, Kevin J.
2009-01-01
Understanding how responses become prepotent is essential for understanding when inhibitory control is needed in everyday behaviour. We investigated prepotency in the grass-snow task--in which a child points to a green card when the experimenter says "snow" and a white card when the experimenter says "grass". Experiment 1 (n =…
NOD2/CARD15 mutations and the risk of reoperation in patients with Crohns disease.
Martínek, L; Kupka, T; Simova, J; Klvaňa, P; Bojková, M; Uvírová, M; Dítě, P; Dvorackova, J; Hoch, J; Zonca, P
2015-06-01
Three NOD2/CARD15 gene variants (3020insC, R702W, G908R) have been identified as genetic risk factors for Crohns disease patients. However the diagnostic and therapeutic relevance for clinical practice remains limited. The aim of this study was to evaluate the association between these variants, the risk of reoperation and disease phenotype. In 76 Crohns disease patients (41 female, 35 male) with a minimum 5 year follow-up, three polymorphisms of the NOD2/CARD15 gene (R702W, G908R, 3020insC) were tested. Detailed clinical and medical history including surgical procedures and reoperations were obtained by reviewing the medical charts and completed prospectively. Association between the need for reoperation, disease phenotypes and gene variants were analyzed. 24 patients (32%) showed at least one NOD2/CARD15 mutation. 25 patients (33%) required reoperation, 51 (67%) represented the control group. The expected trend that patients with NOD2/CARD15 variants have a higher frequency of reoperations was not confirmed to a level of statistical significance (p=0.2688). Two of the four patients (50%) with the 3020insC variant required further surgery. We did not confirm any association between NOD2/CARD15 mutations and age at diagnosis (p=0.4356), behavior (p=0.6610), or localization (p=0.4747) according to the Montreal classification. NOD2/CARD15 polymorphisms did not significantly affect the reoperation rate. Homozygosity for the 3020insC variant in the NOD2/CARD15 gene is associated with a high risk of reoperation. NOD2/CARD15 gene variants are not significantly associated with specific disease phenotypes.
High performance MRI simulations of motion on multi-GPU systems
2014-01-01
Background MRI physics simulators have been developed in the past for optimizing imaging protocols and for training purposes. However, these simulators have only addressed motion within a limited scope. The purpose of this study was the incorporation of realistic motion, such as cardiac motion, respiratory motion and flow, within MRI simulations in a high performance multi-GPU environment. Methods Three different motion models were introduced in the Magnetic Resonance Imaging SIMULator (MRISIMUL) of this study: cardiac motion, respiratory motion and flow. Simulation of a simple Gradient Echo pulse sequence and a CINE pulse sequence on the corresponding anatomical model was performed. Myocardial tagging was also investigated. In pulse sequence design, software crushers were introduced to accommodate the long execution times in order to avoid spurious echoes formation. The displacement of the anatomical model isochromats was calculated within the Graphics Processing Unit (GPU) kernel for every timestep of the pulse sequence. Experiments that would allow simulation of custom anatomical and motion models were also performed. Last, simulations of motion with MRISIMUL on single-node and multi-node multi-GPU systems were examined. Results Gradient Echo and CINE images of the three motion models were produced and motion-related artifacts were demonstrated. The temporal evolution of the contractility of the heart was presented through the application of myocardial tagging. Better simulation performance and image quality were presented through the introduction of software crushers without the need to further increase the computational load and GPU resources. Last, MRISIMUL demonstrated an almost linear scalable performance with the increasing number of available GPU cards, in both single-node and multi-node multi-GPU computer systems. Conclusions MRISIMUL is the first MR physics simulator to have implemented motion with a 3D large computational load on a single computer multi-GPU configuration. The incorporation of realistic motion models, such as cardiac motion, respiratory motion and flow may benefit the design and optimization of existing or new MR pulse sequences, protocols and algorithms, which examine motion related MR applications. PMID:24996972
McKinney, Cushla; Stamp, Lisa K; Dalbeth, Nicola; Topless, Ruth K; Day, Richard O; Kannangara, Diluk Rw; Williams, Kenneth M; Janssen, Matthijs; Jansen, Timothy L; Joosten, Leo A; Radstake, Timothy R; Riches, Philip L; Tausche, Anne-Kathrin; Lioté, Frederic; So, Alexander; Merriman, Tony R
2015-10-13
The acute gout flare results from a localised self-limiting innate immune response to monosodium urate (MSU) crystals deposited in joints in hyperuricaemic individuals. Activation of the caspase recruitment domain-containing protein 8 (CARD8) NOD-like receptor pyrin-containing 3 (NLRP3) inflammasome by MSU crystals and production of mature interleukin-1β (IL-1β) is central to acute gouty arthritis. However very little is known about genetic control of the innate immune response involved in acute gouty arthritis. Therefore our aim was to test functional single nucleotide polymorphism (SNP) variants in the toll-like receptor (TLR)-inflammasome-IL-1β axis for association with gout. 1,494 gout cases of European and 863 gout cases of New Zealand (NZ) Polynesian (Māori and Pacific Island) ancestry were included. Gout was diagnosed by the 1977 ARA gout classification criteria. There were 1,030 Polynesian controls and 10,942 European controls including from the publicly-available Atherosclerosis Risk in Communities (ARIC) and Framingham Heart (FHS) studies. The ten SNPs were either genotyped by Sequenom MassArray or by Affymetrix SNP array or imputed in the ARIC and FHS datasets. Allelic association was done by logistic regression adjusting by age and sex with European and Polynesian data combined by meta-analysis. Sample sets were pooled for multiplicative interaction analysis, which was also adjusted by sample set. Eleven SNPs were tested in the TLR2, CD14, IL1B, CARD8, NLRP3, MYD88, P2RX7, DAPK1 and TNXIP genes. Nominally significant (P < 0.05) associations with gout were detected at CARD8 rs2043211 (OR = 1.12, P = 0.007), IL1B rs1143623 (OR = 1.10, P = 0.020) and CD14 rs2569190 (OR = 1.08; P = 0.036). There was significant multiplicative interaction between CARD8 and IL1B (P = 0.005), with the IL1B risk genotype amplifying the risk effect of CARD8. There is evidence for association of gout with functional variants in CARD8, IL1B and CD14. The gout-associated allele of IL1B increases expression of IL-1β - the multiplicative interaction with CARD8 would be consistent with a synergy of greater inflammasome activity (resulting from reduced CARD8) combined with higher levels of pre-IL-1β expression leading to increased production of mature IL-1β in gout.
DIABCARD a smart card for patients with chronic diseases.
Engelbrecht, R; Hildebrand, C
1997-01-01
Within the European Union-sponsored project DIABCARD, the core of a chip-card-based medical information system for patients with chronic diseases, exemplified on diabetes mellitus, has been developed. The long-term goal of the project is to improve the medical record and the quality of care for patients with chronic diseases. The basic idea is to have a portable electronic medical record on a smart card. This will improve the communication between the different healthcare personnel and between different institutions and, at the same time, promote shared care. The DIABCARD chip-card-based medical information system will offer controlled access to the necessary and up-to-date patient record to everyone involved in the patient's treatment, and it will help reduce the constantly rising healthcare expenditure. The system first was implemented in a small version. The system architecture contains hardware, software, and orgware. It considers especially the memory of the chip card, the processor, the data structure, security functions, the operating system on the chip card, the interface between the chip card and the application, and various application areas. The DIABCARD dataset was defined via an information model, which describes the different communication processes, via acknowledged diabetes datasets and medical scenarios. It includes, among others, emergency data, data for quality assurance, and data for blood glucose self-monitoring. The first prototype has been developed, and a pilot was run for 3 months.
CARD15 Gene Polymorphisms Are Associated with Tuberculosis Susceptibility in Chinese Holstein Cows
Liu, Tong; Tu, Wenji; Li, Wengui; Dong, Guodong; Xu, Cong; Qin, Bo; Liu, Kaihua; Yang, Jie; Chai, Jun; Shi, Xianwei; Zhang, Yifang
2015-01-01
Bovine tuberculosis (BTB) is a significant veterinary and financial problem in many parts of the world. Associations between specific host genes and susceptibility to mycobacterial infections, such as tuberculosis, have been reported in several species. The objective of this study was to identify and evaluate the relationship of single-nucleotide polymorphisms (SNPs) in the CARD15 gene with susceptibility to BTB in Chinese Holstein cows. DNA samples from 201 Chinese Holstein cows (103 cases and 98 controls) were collected from Kunming City, Yuxi City, and Dali City in China. SNPs in the CARD15 gene were assessed using polymerase chain reaction (PCR) and restriction fragment length polymorphism-polymerase chain reaction (RFLP-PCR). Case-control association testing and statistical analysis identified six SNPs associated with susceptibility to BTB in Chinese Holstein cows. The frequency of genotypes C/T, A/G, A/G, A/G, C/T, and A/G in E4 (-37), 208, 1644, 1648, 1799, and E10 (+107), respectively, was significantly higher in cases than in controls, and also the alleles C, A, A, G, T, and A, respectively, were associated with a greater relative risk in cases than in controls. The distribution of two haplotypes, TGGACA and CAGACA, was significantly different between cases and controls. Overall, this case-control study suggested that E4 (-37)(C/T), 208(A/G), 1644(A/G), 1648(A/G), 1799(C/T), and E10 (+107)(A/G) in the CARD15 gene were significantly associated with susceptibility to BTB in Chinese Holstein cows and that haplotypes TGGACA and CAGACA could be used as genetic markers in marker-assisted breeding programs for breeding cows with high resistance to BTB. PMID:26244859
NASA Astrophysics Data System (ADS)
Miwa, Shotaro; Kage, Hiroshi; Hirai, Takashi; Sumi, Kazuhiko
We propose a probabilistic face recognition algorithm for Access Control System(ACS)s. Comparing with existing ACSs using low cost IC-cards, face recognition has advantages in usability and security that it doesn't require people to hold cards over scanners and doesn't accept imposters with authorized cards. Therefore face recognition attracts more interests in security markets than IC-cards. But in security markets where low cost ACSs exist, price competition is important, and there is a limitation on the quality of available cameras and image control. Therefore ACSs using face recognition are required to handle much lower quality images, such as defocused and poor gain-controlled images than high security systems, such as immigration control. To tackle with such image quality problems we developed a face recognition algorithm based on a probabilistic model which combines a variety of image-difference features trained by Real AdaBoost with their prior probability distributions. It enables to evaluate and utilize only reliable features among trained ones during each authentication, and achieve high recognition performance rates. The field evaluation using a pseudo Access Control System installed in our office shows that the proposed system achieves a constant high recognition performance rate independent on face image qualities, that is about four times lower EER (Equal Error Rate) under a variety of image conditions than one without any prior probability distributions. On the other hand using image difference features without any prior probabilities are sensitive to image qualities. We also evaluated PCA, and it has worse, but constant performance rates because of its general optimization on overall data. Comparing with PCA, Real AdaBoost without any prior distribution performs twice better under good image conditions, but degrades to a performance as good as PCA under poor image conditions.
Messina, Bruna; Fuentes, Daniel; Tavares, Hermano; Abdo, Carmita H N; Scanavino, Marco de T
2017-03-01
Despite the serious behavioral consequences faced by individuals with sexual compulsivity, related neuropsychological studies are sparse. To compare decision making and cognitive flexibility at baseline and after exposure to an erotic video in sexually compulsive participants and non-sexually compulsive controls. The sample consisted of 30 sexually compulsive men and 30 controls. Cognitive flexibility was investigated through the Wisconsin Card Sorting Test and decision making was examined through the Iowa Gambling Task. Wisconsin Card Sorting Test categories, correct responses, and perseverative errors and Iowa Gambling Task general trends and blocks. Sexually compulsive subjects and controls performed similarly at baseline. After watching an erotic video, controls performed better in block 1 of the Iowa Gambling Task (P = .01) and had more correct responses on the Wisconsin Card Sorting Test (P = .01). The controls presented fewer impulsive initial choices and better cognitive flexibility after exposure to erotic stimuli. Messina B, Fuentes D, Tavares H, et al. Executive Functioning of Sexually Compulsive and Non-Sexually Compulsive Men Before and After Watching an Erotic Video. J Sex Med 2017;14:347-354. Copyright © 2017. Published by Elsevier Inc.
NASA Technical Reports Server (NTRS)
Hall, William A. (Inventor)
1993-01-01
A bus programmable slave module card for use in a computer control system is disclosed which comprises a master computer and one or more slave computer modules interfacing by means of a bus. Each slave module includes its own microprocessor, memory, and control program for acting as a single loop controller. The slave card includes a plurality of memory means (S1, S2...) corresponding to a like plurality of memory devices (C1, C2...) in the master computer, for each slave memory means its own communication lines connectable through the bus with memory communication lines of an associated memory device in the master computer, and a one-way electronic door which is switchable to either a closed condition or a one-way open condition. With the door closed, communication lines between master computer memory (C1, C2...) and slave memory (S1, S2...) are blocked. In the one-way open condition invention, the memory communication lines or each slave memory means (S1, S2...) connect with the memory communication lines of its associated memory device (C1, C2...) in the master computer, and the memory devices (C1, C2...) of the master computer and slave card are electrically parallel such that information seen by the master's memory is also seen by the slave's memory. The slave card is also connectable to a switch for electronically removing the slave microprocessor from the system. With the master computer and the slave card in programming mode relationship, and the slave microprocessor electronically removed from the system, loading a program in the memory devices (C1, C2...) of the master accomplishes a parallel loading into the memory devices (S1, S2...) of the slave.
An Approach to Near Field Data Selection in Radio Frequency Identification
NASA Astrophysics Data System (ADS)
Winkworth, Robert D.
Personal identification is needed in many civil activities, and the common identification cards, such as a driver's license, have become the standard document de facto. Radio frequency identification has complicated this matter. Unlike their printed predecessors, contemporary RFID cards lack a practical way for users to control access to their individual fields of data. This leaves them more available to unauthorized parties, and more prone to abuse. Here, then was undertaken a means to test a novel RFID card technology that allows overlays to be used for reliable, reversible data access settings. Similar to other proposed switching mechanisms, it offers advantages that may greatly improve outcomes. RFID use is increasing in identity documents such as drivers' licenses and passports, and with it concern over the theft of personal information, which can enable unauthorized tracking or fraud. Effort put into designing a strong foundation technology now may allow for widespread development on them later. In this dissertation, such a technology was designed and constructed, to drive the central thesis that selective detuning could serve as a feasible, reliable mechanism. The concept had been illustrated effective in limiting access to all fields simultaneously before, and was here effective in limiting access to specific fields selectively. A novel card was produced in familiar dimensions, with an intuitive interface by which users may conceal the visible print of the card to conceal the wireless emissions it allows. A discussion was included of similar technologies, involving capacitive switching, that could further improve the outcomes if such a product were put to large-scale commercial fabrication. The card prototype was put to a battery of laboratory tests to measure the degree of independence between data fields and the reliability of the switching mechanism when used under realistically variable coverage, demonstrating statistically consistent performance in both. The success rate of RFID card read operations, which are already greater than 99.9%, were exceeded by the success rate of selection using the featured technology. With controls in place for the most influential factors related to card readability (namely the distance from the reader antennas and the orientation of the card antenna with respect to them), the card was shown to completely resist data acquisition from unauthorized fields while allowing unimpeded access to authorized fields, even after thousands of varied attempts. The effect was proven to be temporary and reversible. User intervention allowed for the switching to occur in a matter of seconds by sliding a conductive sleeve or applying tape to regions of the card. Strategies for widespread implementation were discussed, emphasizing factors that included cost, durability, size, simplicity, and familiarity, all of which arise in card management decisions for common state and national identification such as a driver's license. The relationship between the card and external database systems was detailed, as no such identification document could function in isolation. A practical solution involving it will include details of how multiple fields will be written to the card and separated sufficiently in external databases so as to allow for user-directed selection of data field disclosure. Opportunities for implementation in corporate and academic environments were discussed, along with the ways in which this technology could invite further investigation.
Cortes, Aneg L; Montiel, Enrique R; Gimeno, Isabel M
2009-12-01
The use of Flinders Technology Associates (FTA) filter cards to quantify Marek's disease virus (MDV) DNA for the diagnosis of Marek's disease (MD) and to monitor MD vaccines was evaluated. Samples of blood (43), solid tumors (14), and feather pulp (FP; 36) collected fresh and in FTA cards were analyzed. MDV DNA load was quantified by real-time PCR. Threshold cycle (Ct) ratios were calculated for each sample by dividing the Ct value of the internal control gene (glyceraldehyde-3-phosphate dehydrogenase) by the Ct value of the MDV gene. Statistically significant correlation (P < 0.05) within Ct ratios was detected between samples collected fresh and in FTA cards by using Pearson's correlation test. Load of serotype 1 MDV DNA was quantified in 24 FP, 14 solid tumor, and 43 blood samples. There was a statistically significant correlation between FP (r = 0.95), solid tumor (r = 0.94), and blood (r = 0.9) samples collected fresh and in FTA cards. Load of serotype 2 MDV DNA was quantified in 17 FP samples, and the correlation between samples collected fresh and in FTA cards was also statistically significant (Pearson's coefficient, r = 0.96); load of serotype 3 MDV DNA was quantified in 36 FP samples, and correlation between samples taken fresh and in FTA cards was also statistically significant (r = 0.84). MDV DNA samples extracted 3 days (t0) and 8 months after collection (t1) were used to evaluate the stability of MDV DNA in archived samples collected in FTA cards. A statistically significant correlation was found for serotype 1 (r = 0.96), serotype 2 (r = 1), and serotype 3 (r = 0.9). The results show that FTA cards are an excellent media to collect, transport, and archive samples for MD diagnosis and to monitor MD vaccines. In addition, FTA cards are widely available, inexpensive, and adequate for the shipment of samples nationally and internationally.
Programmable data communications controller requirements
NASA Technical Reports Server (NTRS)
1977-01-01
The design requirements for a Programmable Data Communications Controller (PDCC) that reduces the difficulties in attaching data terminal equipment to a computer are presented. The PDCC is an interface between the computer I/O channel and the bit serial communication lines. Each communication line is supported by a communication port that handles all line control functions and performs most terminal control functions. The port is fabricated on a printed circuit board that plugs into a card chassis, mating with a connector that is joined to all other card stations by a data bus. Ports are individually programmable; each includes a microprocessor, a programmable read-only memory for instruction storage, and a random access memory for data storage.
ECG-gated interventional cardiac reconstruction for non-periodic motion.
Rohkohl, Christopher; Lauritsch, Günter; Biller, Lisa; Hornegger, Joachim
2010-01-01
The 3-D reconstruction of cardiac vasculature using C-arm CT is an active and challenging field of research. In interventional environments patients often do have arrhythmic heart signals or cannot hold breath during the complete data acquisition. This important group of patients cannot be reconstructed with current approaches that do strongly depend on a high degree of cardiac motion periodicity for working properly. In a last year's MICCAI contribution a first algorithm was presented that is able to estimate non-periodic 4-D motion patterns. However, to some degree that algorithm still depends on periodicity, as it requires a prior image which is obtained using a simple ECG-gated reconstruction. In this work we aim to provide a solution to this problem by developing a motion compensated ECG-gating algorithm. It is built upon a 4-D time-continuous affine motion model which is capable of compactly describing highly non-periodic motion patterns. A stochastic optimization scheme is derived which minimizes the error between the measured projection data and the forward projection of the motion compensated reconstruction. For evaluation, the algorithm is applied to 5 datasets of the left coronary arteries of patients that have ignored the breath hold command and/or had arrhythmic heart signals during the data acquisition. By applying the developed algorithm the average visibility of the vessel segments could be increased by 27%. The results show that the proposed algorithm provides excellent reconstruction quality in cases where classical approaches fail. The algorithm is highly parallelizable and a clinically feasible runtime of under 4 minutes is achieved using modern graphics card hardware.
2011-04-30
fielding, contracting, interoperability, organizational behavior, risk management , cost estimating, and many others. Approaches range from... COSO ), (Whittington & Pany, 2012). In addition, the Federal Financial Management Improvement Act of 1996 identified internal control as an...fraud indicators within the DoD Government Purchase Card Programs and provides recommendations for improving the management of Government Purchase
Code of Federal Regulations, 2011 CFR
2011-01-01
... CONTROL (REGULATION Y) Pt. 225, App. D Appendix D to Part 225—Capital Adequacy Guidelines for Bank Holding..., nonmortgage servicing assets, and purchased credit card relationships that, in the aggregate, are in excess of 100 percent of Tier 1 capital; amounts of nonmortgage servicing assets and purchased credit card...
Statistical Tools for Determining Fitness to Fly
1981-09-01
program. (a) Number of Cards in file: 13 (b) Layout of Card 1: iIi Field Length a•e. Variable 1 8 Real EFAIL : Average # of failures for size of control...Method Compute Survival Probability and Frequency Tables 4-4 END 25P FLUW CHARTS 27 QSTART Input EFAIL ,CYEAR,NVAR,NAV,XINC BB~i i=1,3 name (1) i=1,4 Call
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-12
...: Statement Regarding a Lost or Stolen U.S. Passport Book and/or Card ACTION: Notice of request for public... Collection: Statement Regarding a Lost or Stolen U.S. Passport Book and/or Card OMB Control Number: 1405-0014... Affairs, Passport Services, Office of Program Management and Operational Support, Program Coordination...
ERIC Educational Resources Information Center
Okpube, Nnaemeka Michael; Anugwo, M. N.
2016-01-01
This study investigated the Card Games and Algebra tic-Tacmatics on Junior Secondary II Students' Achievement in Algebraic Expressions. Three research questions and three null hypotheses guided the study. The study adopted the pre-test, post-test control group design. A total of two hundred and forty (240) Junior Secondary School II students were…
A computer program to trace seismic ray distribution in complex two-dimensional geological models
Yacoub, Nazieh K.; Scott, James H.
1970-01-01
A computer program has been developed to trace seismic rays and their amplitudes and energies through complex two-dimensional geological models, for which boundaries between elastic units are defined by a series of digitized X-, Y-coordinate values. Input data for the program includes problem identification, control parameters, model coordinates and elastic parameter for the elastic units. The program evaluates the partitioning of ray amplitude and energy at elastic boundaries, computes the total travel time, total travel distance and other parameters for rays arising at the earth's surface. Instructions are given for punching program control cards and data cards, and for arranging input card decks. An example of printer output for a simple problem is presented. The program is written in FORTRAN IV language. The listing of the program is shown in the Appendix, with an example output from a CDC-6600 computer.
Cuvo, A J; Klatt, K P
1992-01-01
Community-referenced sight words and phrases were taught to adolescents with mild and moderate mental retardation using three instructional methods in two locations. Words were presented on flash cards in a school setting, on videotape recordings in a school setting, and on naturally occurring signs in the community. During each session, participants were taught one third of the words in each of these conditions and were then tested at the community sites. A constant prompt delay procedure was used to promote stimulus control to the experimenter's cue initially and then to transfer control to the textual stimuli used for training. A multiple baseline across participants design was employed. Results showed rapid acquisition of the community-referenced sight words in all three training conditions and generalization from the flash card and videotape conditions to the community sites. PMID:1378827
NASA Technical Reports Server (NTRS)
Jordan, T. M.
1970-01-01
A description of the FASTER-III program for Monte Carlo Carlo calculation of photon and neutron transport in complex geometries is presented. Major revisions include the capability of calculating minimum weight shield configurations for primary and secondary radiation and optimal importance sampling parameters. The program description includes a users manual describing the preparation of input data cards, the printout from a sample problem including the data card images, definitions of Fortran variables, the program logic, and the control cards required to run on the IBM 7094, IBM 360, UNIVAC 1108 and CDC 6600 computers.
NASA Astrophysics Data System (ADS)
Prejean-Harris, Rose M.
Over the last decade, accountability has been the driving force for many changes in education in the United States. One major educational reform effort is the standards-based movement with a focus of combining a number of processes that involve aligning curriculum, instruction, assessment and feedback to specific standards that are measureable and indicative of student achievement. The purpose of this study is to determine if the type of report card is a possible predictor of third grade student achievement on standardized tests in mathematics and science for the 2012 Criterion-Referenced Competency Test (CRCT). The results of this study concluded that the difference in test scores in mathematics and science for students in the traditional report card group was not statistically significant when compared to the scores of students in the standards-based report card group when controlling for poverty level, school locale, and school district. However, students in the traditional report card group scored an average of 1.01 point higher in mathematics and 2.27 points higher in science than students in the standards-based report card group.
Peluso, A L; Cozzolino, I; Bottiglieri, A; Lucchese, L; Di Crescenzo, R M; Langella, M; Selleri, C; Zeppa, P
2017-06-01
To evaluate and compare the DNA yield and quality extracted from lymph node fine needle cytology (FNC) samples stored on FTA cards to those cryopreserved, and to assess the immunoglobulin heavy and light chains (IGHK) and T-Cell receptor beta and gamma chains (TCRBG) PCR tests. DNA extractions were performed on FNC of 80 non-Hodgkin lymphomas (NHL), four myelomas and 56 benign reactive hyperplasias (BRH) cryopreserved and stored on FTA cards. The JAK2 gene was amplified to assess the DNA integrity and the IGHK/TCRBG clonality status was tested. IGHK monoclonality was found in 99% of B-cell NHL and 100% of myeloma. TCRBG monoclonality was found in 100% of T-cell NHL. TCRBG polyclonality was detected in 97% of B-cell NHL, 100% of myeloma and 96% of BRH. IGHK/TCRBG PCR data were confirmed by histological and/or follow-up controls. No differences were found in the DNA quality between cryopreservation and FTA cards storage methods. IGHK/TCRBG PCR of the lymphoproliferative process on FTA cards is comparable to those cryopreserved. FTA cards can be used to store lymph node FNC for further molecular investigations. © 2016 John Wiley & Sons Ltd.
Sánchez, Juan Luis; Martín, Javier; López, Carolina
2017-12-01
The classic version of the Wisconsin Card Sorting Test (WCST) consists of correctly sorting 128 cards according to changing sorting criteria. Its application is costly in terms of the time employed, with all the negative consequences this entails (decrease in motivation, frustration, and fatigue). The main objective of this study was to test the usefulness of the shortened version of the WCST as compared to the full test by analyzing the equivalence between the two decks comprising the full 128-card version on a sample of patients diagnosed with sporadic late onset Alzheimer disease (SLOAD) and to check its clinical usefulness. The variables showed equivalence between the two decks and their ability to differentiate between the control group (CG) and the Alzheimer disease (AD) group. The scores obtained suggest equivalence between decks and that the application of only the first deck is sufficient.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bolton, N. E.; Ketchen, E. E.; Porter, W. E.
For large industrial and research operations, maintaining reasonable control of all toxic materials used in their operations can be a formidable task. A system utilizing cards has been developed that serves a dual purpose, informing the user regarding hazards of a particular material and also facilitating appropriate workplace surveillance during its use. Selected data, including threshold limit values, routes of absorption, symptoms of exposure, chronic effects, and emergency first-aid procedures, are printed on the card. A portion of the card contains the label that the user detaches and affixes to the container. This label classifies the material according to flammability,more » toxicity, reactivity, and special properties on a 0 through 4 hazard rating system. This report describes the development and use of such cards, contains the associated Toxic Material Data Sheets that provide full backup data for the labels, and furnishes a glossary of biomedical terms used in the Data Sheets.« less
General purpose PDP-11 interface processor
DOE Office of Scientific and Technical Information (OSTI.GOV)
Purtilo, J.
1982-10-01
The Z80 interface card, which for simplicity we refer to as the Zcard, is a general purpose microprocessor which is directly interfaced to the Whaley multiplexor, itself implemented on PDP-11 series computers at the University of Illinois. The Zcard provides two serial ports at EAI interface levels and contains up to 16K of local memory. The principle function of the Zcard is to serve as an interface in which the user might alter protocols, change interface characteristics (e.g. baud rate, hardware echo, or flow control), or switch between synchronous and asynchronous modes all under software control. In addition, the Zcardmore » provides extra lines for control of external devices (e.g. modem) and input of status data. In the simpliest use, the Zcard runs a program, downloaded from the PDP-11, which emulates the level EIAFB card (previously developed for the Whaley Multiplexor) for serial communication with terminals. Using no flow control, Zcard performance seems superior to that of the EIAFB card in that no characters are lost under normal use (due to the much larger buffer which the Zcard can provide). The Zcard can further distinguish itself from the EIAFB card in that flow control can be enabled by software. A more sophisticated application of the Zcard might include linking several Zcards (using a synchronous option and both of the provided ports) into a network. In this capacity, a ring topology suggests itself as the most immediate choice, although many alternate connection schemes can be envisioned. This report is intended to summarize the project as well as provide an outline for those intending to modify or program the Zcard.« less
Schunk, Mirjam; Kebede Mekonnen, Seleshi; Wondafrash, Beyene; Mengele, Carolin; Fleischmann, Erna; Herbinger, Karl-Heinz; Verweij, Jaco J.; Geldmacher, Christof; Bretzel, Gisela; Löscher, Thomas; Zeynudin, Ahmed
2015-01-01
Background In Schistosoma mansoni infection, diagnosis and control after treatment mainly rely on parasitological stool investigations which are laborious and have limited sensitivity. PCR methods have shown equal or superior sensitivity but preservation and storage methods limit their use in the field. Therefore, the use of occult blood detection cards (fecal cards) for easy sampling and storage of fecal samples for further PCR testing was evaluated in a pilot study. Methodology Stool specimens were collected in a highly endemic area for S. mansoni in Ethiopia and submitted in an investigator-blinded fashion to microscopic examination by Kato-Katz thick smear as well as to real-time PCR using either fresh frozen stool samples or stool smears on fecal cards which have been stored at ambient temperature for up to ten months. Principal Findings Out of 55 stool samples, 35 were positive by microscopy, 33 and 32 were positive by PCR of frozen samples and of fecal card samples, respectively. When microscopy was used as diagnostic “gold standard”, the sensitivity of PCR on fresh stool was 94.3% (95%-CI: 86.6; 100) and on fecal cards 91.4% (95%-CI: 82.2; 100). Conclusions The use of fecal cards proved to be a simple and useful method for stool collection and prolonged storage prior to PCR based diagnosis of S. mansoni infection. This technique may be a valuable approach for large scale surveillance and post treatment assessments PMID:26360049
Schunk, Mirjam; Kebede Mekonnen, Seleshi; Wondafrash, Beyene; Mengele, Carolin; Fleischmann, Erna; Herbinger, Karl-Heinz; Verweij, Jaco J; Geldmacher, Christof; Bretzel, Gisela; Löscher, Thomas; Zeynudin, Ahmed
2015-01-01
In Schistosoma mansoni infection, diagnosis and control after treatment mainly rely on parasitological stool investigations which are laborious and have limited sensitivity. PCR methods have shown equal or superior sensitivity but preservation and storage methods limit their use in the field. Therefore, the use of occult blood detection cards (fecal cards) for easy sampling and storage of fecal samples for further PCR testing was evaluated in a pilot study. Stool specimens were collected in a highly endemic area for S. mansoni in Ethiopia and submitted in an investigator-blinded fashion to microscopic examination by Kato-Katz thick smear as well as to real-time PCR using either fresh frozen stool samples or stool smears on fecal cards which have been stored at ambient temperature for up to ten months. Out of 55 stool samples, 35 were positive by microscopy, 33 and 32 were positive by PCR of frozen samples and of fecal card samples, respectively. When microscopy was used as diagnostic "gold standard", the sensitivity of PCR on fresh stool was 94.3% (95%-CI: 86.6; 100) and on fecal cards 91.4% (95%-CI: 82.2; 100). The use of fecal cards proved to be a simple and useful method for stool collection and prolonged storage prior to PCR based diagnosis of S. mansoni infection. This technique may be a valuable approach for large scale surveillance and post treatment assessments.
2011-12-29
ISS030-E-017776 (29 Dec. 2011) --- Working in chorus with the International Space Station team in Houston?s Mission Control Center, this astronaut and his Expedition 30 crewmates on the station install a set of Enhanced Processor and Integrated Communications (EPIC) computer cards in one of seven primary computers onboard. The upgrade will allow more experiments to operate simultaneously, and prepare for the arrival of commercial cargo ships later this year.
ERIC Educational Resources Information Center
Fisher, Anna V.
2011-01-01
Two experiments tested a hypothesis that reducing demands on executive control in a Dimensional Change Card Sort task will lead to improved performance in 3-year-olds. In Experiment 1, the shape dimension was represented by two dissimilar values ("stars" and "flowers"), and the color dimension was represented by two similar values ("red" and…
Inventory of Archaeological and Historical Resources Lava Flow Control Study, Hilo, Hawaii,
1979-05-01
amale- p 11111 S.PIaN. Sitea card; hial. 1971 :2 aa. INVENTRh Y OF AIIAj4AOLGICAL AND HISIORICAL ESItIMCES Sit umber Site Dedption e Period Coed...liaison. 1932:294 SO-a-Al-ST Kalled , paved 4 PPI.Site Card; NHudson, 1932:29S.2W6 terraced platorm bo-Li-AI. 55$ Legendary crevite, Esrsaa% 1903:Is
Three dimensional touch and vision for the micro-world
NASA Astrophysics Data System (ADS)
Bowman, Richard W.
This thesis describes advances in the holographic technology used to control multiple optical traps (and hence many trapped particles), and improved methods for monitoring the positions and forces involved. The speed with which multiple holographic optical traps can be moved has traditionally been limited by the time taken to calculate holograms, but by using consumer graphics cards and high speed Spatial Light Modulators (SLMs) I have implemented holographic systems fast enough to react to the Brownian motion of trapped particles. Brownian motion can, to some extent, be suppressed by this approach, and it also allows the trap's stiffness to be engineered to balance sensitivity against tight constraint of position. Feedback control using an SLM, rather than the other beam steering technologies that have been employed, is able to react to motion in three dimensions. This requires 3D position measurement, which is provided by the stereo microscopy technique described in Chapter 2. By illuminating and viewing the sample from two different angles it is possible to reconstruct the depth of objects. This is accomplished through a single high numerical aperture microscope objective, the same lens used to focus the trapping laser. In conjunction with a fast CMOS camera, it is possible to track particles with an accuracy of 2-3nm at several thousand frames per second. This allows measurement of forces and displacements within the control loop, that can be fed back to influence the position of the optical traps. This force information can also be relayed to the operator using a force-feedback joystick as detailed in Chapter 7. Interface design is an important part of making technology accessible to scientists from other disciplines; to this end I have also developed a multi-touch tablet application to control optical tweezers. By creating simple, reliable systems and coupling them to an intuitive interface, I have endeavoured to produce developments which are of use to the non-specialist as well as to experts in optical tweezers-a number of which are now available commercially (Section 8.7). These technologies form the basis of a toolkit for working with multi-part probes in optical tweezers, and they should bear fruit in the coming years as a new form of scanning-probe microscopy emerges.
Global motion perception is associated with motor function in 2-year-old children.
Thompson, Benjamin; McKinlay, Christopher J D; Chakraborty, Arijit; Anstice, Nicola S; Jacobs, Robert J; Paudel, Nabin; Yu, Tzu-Ying; Ansell, Judith M; Wouldes, Trecia A; Harding, Jane E
2017-09-29
The dorsal visual processing stream that includes V1, motion sensitive area V5 and the posterior parietal lobe, supports visually guided motor function. Two recent studies have reported associations between global motion perception, a behavioural measure of processing in V5, and motor function in pre-school and school aged children. This indicates a relationship between visual and motor development and also supports the use of global motion perception to assess overall dorsal stream function in studies of human neurodevelopment. We investigated whether associations between vision and motor function were present at 2 years of age, a substantially earlier stage of development. The Bayley III test of Infant and Toddler Development and measures of vision including visual acuity (Cardiff Acuity Cards), stereopsis (Lang stereotest) and global motion perception were attempted in 404 2-year-old children (±4 weeks). Global motion perception (quantified as a motion coherence threshold) was assessed by observing optokinetic nystagmus in response to random dot kinematograms of varying coherence. Linear regression revealed that global motion perception was modestly, but statistically significantly associated with Bayley III composite motor (r 2 =0.06, P<0.001, n=375) and gross motor scores (r 2 =0.06, p<0.001, n=375). The associations remained significant when language score was included in the regression model. In addition, when language score was included in the model, stereopsis was significantly associated with composite motor and fine motor scores, but unaided visual acuity was not statistically significantly associated with any of the motor scores. These results demonstrate that global motion perception and binocular vision are associated with motor function at an early stage of development. Global motion perception can be used as a partial measure of dorsal stream function from early childhood. Copyright © 2017 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Noordmans, Herke Jan; de Roode, Rowland; Verdaasdonk, Rudolf
2007-03-01
Multi-spectral images of human tissue taken in-vivo often contain image alignment problems as patients have difficulty in retaining their posture during the acquisition time of 20 seconds. Previously, it has been attempted to correct motion errors with image registration software developed for MR or CT data but these algorithms have been proven to be too slow and erroneous for practical use with multi-spectral images. A new software package has been developed which allows the user to play a decisive role in the registration process as the user can monitor the progress of the registration continuously and force it in the right direction when it starts to fail. The software efficiently exploits videocard hardware to gain speed and to provide a perfect subvoxel correspondence between registration field and display. An 8 bit graphic card was used to efficiently register and resample 12 bit images using the hardware interpolation modes present on the graphic card. To show the feasibility of this new registration process, the software was applied in clinical practice evaluating the dosimetry for psoriasis and KTP laser treatment. The microscopic differences between images of normal skin and skin exposed to UV light proved that an affine registration step including zooming and slanting is critical for a subsequent elastic match to have success. The combination of user interactive registration software with optimal addressing the potentials of PC video card hardware greatly improves the speed of multi spectral image registration.
NASA Astrophysics Data System (ADS)
Noordmans, Herke J.; de Roode, Rowland; Verdaasdonk, Rudolf
2007-02-01
Multi-spectral images of human tissue taken in-vivo often contain image alignment problems as patients have difficulty in retaining their posture during the acquisition time of 20 seconds. Previously, it has been attempted to correct motion errors with image registration software developed for MR or CT data but these algorithms have been proven to be too slow and erroneous for practical use with multi-spectral images. A new software package has been developed which allows the user to play a decisive role in the registration process as the user can monitor the progress of the registration continuously and force it in the right direction when it starts to fail. The software efficiently exploits videocard hardware to gain speed and to provide a perfect subvoxel correspondence between registration field and display. An 8 bit graphic card was used to efficiently register and resample 12 bit images using the hardware interpolation modes present on the graphic card. To show the feasibility of this new registration process, the software was applied in clinical practice evaluating the dosimetry for psoriasis and KTP laser treatment. The microscopic differences between images of normal skin and skin exposed to UV light proved that an affine registration step including zooming and slanting is critical for a subsequent elastic match to have success. The combination of user interactive registration software with optimal addressing the potentials of PC video card hardware greatly improves the speed of multi spectral image registration.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
This report contains papers on the following topics: NREN Security Issues: Policies and Technologies; Layer Wars: Protect the Internet with Network Layer Security; Electronic Commission Management; Workflow 2000 - Electronic Document Authorization in Practice; Security Issues of a UNIX PEM Implementation; Implementing Privacy Enhanced Mail on VMS; Distributed Public Key Certificate Management; Protecting the Integrity of Privacy-enhanced Electronic Mail; Practical Authorization in Large Heterogeneous Distributed Systems; Security Issues in the Truffles File System; Issues surrounding the use of Cryptographic Algorithms and Smart Card Applications; Smart Card Augmentation of Kerberos; and An Overview of the Advanced Smart Card Access Control System.more » Selected papers were processed separately for inclusion in the Energy Science and Technology Database.« less
High density processing electronics for superconducting tunnel junction x-ray detector arrays
NASA Astrophysics Data System (ADS)
Warburton, W. K.; Harris, J. T.; Friedrich, S.
2015-06-01
Superconducting tunnel junctions (STJs) are excellent soft x-ray (100-2000 eV) detectors, particularly for synchrotron applications, because of their ability to obtain energy resolutions below 10 eV at count rates approaching 10 kcps. In order to achieve useful solid detection angles with these very small detectors, they are typically deployed in large arrays - currently with 100+ elements, but with 1000 elements being contemplated. In this paper we review a 5-year effort to develop compact, computer controlled low-noise processing electronics for STJ detector arrays, focusing on the major issues encountered and our solutions to them. Of particular interest are our preamplifier design, which can set the STJ operating points under computer control and achieve 2.7 eV energy resolution; our low noise power supply, which produces only 2 nV/√Hz noise at the preamplifier's critical cascode node; our digital processing card that digitizes and digitally processes 32 channels; and an STJ I-V curve scanning algorithm that computes noise as a function of offset voltage, allowing an optimum operating point to be easily selected. With 32 preamplifiers laid out on a custom 3U EuroCard, and the 32 channel digital card in a 3U PXI card format, electronics for a 128 channel array occupy only two small chassis, each the size of a National Instruments 5-slot PXI crate, and allow full array control with simple extensions of existing beam line data collection packages.
Zinzow-Kramer, W M; Long, A B; Youngblood, B A; Rosenthal, K M; Butler, R; Mohammed, A-U-R; Skountzou, I; Ahmed, R; Evavold, B D; Boss, J M
2012-06-01
Three distinct promoters control the master regulator of major histocompatibility complex (MHC) class II expression, class II transactivator (CIITA), in a cell type-specific manner. Promoter I (pI) CIITA, expressed primarily by dendritic cells (DCs) and macrophages, expresses a unique isoform that contains a caspase-recruitment domain (CARD). The activity and function of this isoform are not understood, but are believed to enhance the function of CIITA in antigen-presenting cells. To determine whether isoform I of CIITA has specific functions, CIITA mutant mice were created in which isoform I was replaced with isoform III sequences. Mice in which pI and the CARD-encoding exon were deleted were also created. No defect in the formation of CD4 T cells, the ability to respond to a model antigen or bacterial or viral challenge was observed in mice lacking CIITA isoform I. Although CIITA and MHC-II expression was decreased in splenic DCs, pI knockout animals expressed CIITA from downstream promoters, suggesting that control of pI activity is mediated by unknown distal elements that could act at pIII, the B-cell promoter. Thus, no critical function is linked to the CARD domain of CIITA isoform I with respect to basic immune system development, function and challenge.
Low Power Near Field Communication Methods for RFID Applications of SIM Cards.
Chen, Yicheng; Zheng, Zhaoxia; Gong, Mingyang; Yu, Fengqi
2017-04-14
Power consumption and communication distance have become crucial challenges for SIM card RFID (radio frequency identification) applications. The combination of long distance 2.45 GHz radio frequency (RF) technology and low power 2 kHz near distance communication is a workable scheme. In this paper, an ultra-low frequency 2 kHz near field communication (NFC) method suitable for SIM cards is proposed and verified in silicon. The low frequency transmission model based on electromagnetic induction is discussed. Different transmission modes are introduced and compared, which show that the baseband transmit mode has a better performance. The low-pass filter circuit and programmable gain amplifiers are applied for noise reduction and signal amplitude amplification. Digital-to-analog converters and comparators are used to judge the card approach and departure. A novel differential Manchester decoder is proposed to deal with the internal clock drift in range-controlled communication applications. The chip has been fully implemented in 0.18 µm complementary metal-oxide-semiconductor (CMOS) technology, with a 330 µA work current and a 45 µA idle current. The low frequency chip can be integrated into a radio frequency SIM card for near field RFID applications.
Hubin, Elizabeth A; Fay, Allison; Xu, Catherine; Bean, James M; Saecker, Ruth M; Glickman, Michael S; Darst, Seth A; Campbell, Elizabeth A
2017-01-01
RbpA and CarD are essential transcription regulators in mycobacteria. Mechanistic analyses of promoter open complex (RPo) formation establish that RbpA and CarD cooperatively stimulate formation of an intermediate (RP2) leading to RPo; formation of RP2 is likely a bottleneck step at the majority of mycobacterial promoters. Once RPo forms, CarD also disfavors its isomerization back to RP2. We determined a 2.76 Å-resolution crystal structure of a mycobacterial transcription initiation complex (TIC) with RbpA as well as a CarD/RbpA/TIC model. Both CarD and RbpA bind near the upstream edge of the −10 element where they likely facilitate DNA bending and impede transcription bubble collapse. In vivo studies demonstrate the essential role of RbpA, show the effects of RbpA truncations on transcription and cell physiology, and indicate additional functions for RbpA not evident in vitro. This work provides a framework to understand the control of mycobacterial transcription by RbpA and CarD. DOI: http://dx.doi.org/10.7554/eLife.22520.001 PMID:28067618
Njenga, S M; Wamae, C N
2001-10-01
An immunochromatographic card test (ICT) that uses fingerprick whole blood instead of serum for diagnosis of bancroftian filariasis has recently been developed. The card test was validated in the field in Kenya by comparing its sensitivity to the combined sensitivity of Knott's concentration and counting chamber methods. A total of 102 (14.6%) and 117 (16.7%) persons was found to be microfilaremic by Knott's concentration and counting chamber methods, respectively. The geometric mean intensities (GMI) were 74.6 microfilariae (mf)/ml and 256.5 mf/ml by Knott's concentration and counting chamber methods, respectively. All infected individuals detected by both Knott's concentration and counting chamber methods were also antigen positive by the ICT filariasis card test (100% sensitivity). Further, of 97 parasitologically amicrofilaremic persons, 24 (24.7%) were antigen positive by the ICT. The overall prevalence of antigenemia was 37.3%. Of 100 nonendemic area control persons, none was found to be filarial antigen positive (100% specificity). The results show that the new version of the ICT filariasis card test is a simple, sensitive, specific, and rapid test that is convenient in field settings.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bharoto,; Suparno, Nadi; Putra, Edy Giri Rachman
In 2005, the main computer for data acquisition and control system of Small-angle Neutron Scattering (SANS) BATAN Spectrometer (SMARTer) was replaced since it halted to operate the spectrometer. According to this replacement, the new software for data acquisition and control system has been developed in-house. Visual Basic programming language is used in developing the software. In the last two years, many developments have been made both in the hardware and also the software to conduct the experiment is more effective and efficient. Lately, the previous motor controller card (ISA Card) was replaced with the programmable motor controller card (PCI Card)more » for driving one motor of position sensitive detector (PSD), eight motors of four collimators, and six motors of six pinhole discs. This new control system software makes all motors can be moved simultaneously, then it reduces significantly the consuming time of setting up the instrument before running the experiment. Along with that development, the new data acquisition software under MS Windows operating system is also developed to drive a beam stopper in X-Y directions as well as to read the equipment status such as position of the collimators and PSD, to acquire neutron counts on monitor and PSD detectors, and also to manage 12 samples position automatically. A timer object which is set in one second to read the equipment status via serial port of the computer (RS232C), and general purpose interface board (GPIB) for reading the total counts of each pixel of the PSD from histogram memory was used in this new software. The experiment result displayed in real time on the main window, and the data is saved in the special format for further data reduction and analysis. The new software has been implemented and performed for experiment using a preset count or preset time mode for absolute scattering intensity method.« less
NASA Astrophysics Data System (ADS)
Bharoto, Suparno, Nadi; Putra, Edy Giri Rachman
2015-04-01
In 2005, the main computer for data acquisition and control system of Small-angle Neutron Scattering (SANS) BATAN Spectrometer (SMARTer) was replaced since it halted to operate the spectrometer. According to this replacement, the new software for data acquisition and control system has been developed in-house. Visual Basic programming language is used in developing the software. In the last two years, many developments have been made both in the hardware and also the software to conduct the experiment is more effective and efficient. Lately, the previous motor controller card (ISA Card) was replaced with the programmable motor controller card (PCI Card) for driving one motor of position sensitive detector (PSD), eight motors of four collimators, and six motors of six pinhole discs. This new control system software makes all motors can be moved simultaneously, then it reduces significantly the consuming time of setting up the instrument before running the experiment. Along with that development, the new data acquisition software under MS Windows operating system is also developed to drive a beam stopper in X-Y directions as well as to read the equipment status such as position of the collimators and PSD, to acquire neutron counts on monitor and PSD detectors, and also to manage 12 samples position automatically. A timer object which is set in one second to read the equipment status via serial port of the computer (RS232C), and general purpose interface board (GPIB) for reading the total counts of each pixel of the PSD from histogram memory was used in this new software. The experiment result displayed in real time on the main window, and the data is saved in the special format for further data reduction and analysis. The new software has been implemented and performed for experiment using a preset count or preset time mode for absolute scattering intensity method.
Sigsgaard, Lene; Herz, Annette; Korsgaard, Maren; Wührer, Bernd
2017-01-01
Cydia pomonella is a major pest in apples in Denmark. Trichogramma spp. are known biocontrol agents of C. pomonella eggs and two naturally occurring species in Denmark, which are also both commercially available, were chosen for mass-release trials. Trichogramma evanescens, T. cacoeciae or a mix of the two species were evaluated for mass-release to control C. pomonella in two commercial organic apple orchards, one in 2012 and one in 2013, using a complete randomized block design. Pheromone disruption was used in both orchards, making the study one of the first to evaluate Trichogramma release under a mating disruption regime. Trichogramma activity was assessed using bait cards with Sitotroga cerealella eggs. The percent C. pomonella damaged fruit was recorded and the fruit yield was estimated. In 2012 cool and wet weather conditions resulted in low Trichogramma activity (<16% bait cards parasitized) and only T. evanescens was recovered from bait cards. The conditions in 2013 were warmer but T. evanescens was still >10 times more frequently found in bait cards than T. cacoeciae. There was a significant effect of the treatment and year (p = 0.009) and of the sampling period (p = 0.0008) on Trichogramma activity (proportion bait cards parasitized), with no significant difference between treatments in 2012. In 2013 the highest activity was found in T. evanescens and mixed treatments, in July reaching 69% and 47% bait cards parasitized, respectively. Fruit damage was highest in the control plots (7.1%) compared with Trichogramma treatments (T. evanescens 2.8%, T. cacoeciae 3.8%, mixed 3.3%) (p = 0.028). Yield did not differ significantly between treatments. In conclusion, Trichogramma mass release is a promising biocontrol method for use in the Danish climate, but further studies are needed regarding the performance of the two Trichogramma species (and potential other Trichogramma species) towards C. pomonella eggs in the field to identify the best biocontrol candidate. PMID:28375171
Sigsgaard, Lene; Herz, Annette; Korsgaard, Maren; Wührer, Bernd
2017-04-04
Cydia pomonella is a major pest in apples in Denmark. Trichogramma spp. are known biocontrol agents of C. pomonella eggs and two naturally occurring species in Denmark, which are also both commercially available, were chosen for mass-release trials. Trichogramma evanescens , T. cacoeciae or a mix of the two species were evaluated for mass-release to control C. pomonella in two commercial organic apple orchards, one in 2012 and one in 2013, using a complete randomized block design. Pheromone disruption was used in both orchards, making the study one of the first to evaluate Trichogramma release under a mating disruption regime. Trichogramma activity was assessed using bait cards with Sitotroga cerealella eggs. The percent C. pomonella damaged fruit was recorded and the fruit yield was estimated. In 2012 cool and wet weather conditions resulted in low Trichogramma activity (<16% bait cards parasitized) and only T. evanescens was recovered from bait cards. The conditions in 2013 were warmer but T. evanescens was still >10 times more frequently found in bait cards than T. cacoeciae . There was a significant effect of the treatment and year ( p = 0.009) and of the sampling period ( p = 0.0008) on Trichogramma activity (proportion bait cards parasitized), with no significant difference between treatments in 2012. In 2013 the highest activity was found in T. evanescens and mixed treatments, in July reaching 69% and 47% bait cards parasitized, respectively. Fruit damage was highest in the control plots (7.1%) compared with Trichogramma treatments ( T. evanescens 2.8%, T. cacoeciae 3.8%, mixed 3.3%) ( p = 0.028). Yield did not differ significantly between treatments. In conclusion, Trichogramma mass release is a promising biocontrol method for use in the Danish climate, but further studies are needed regarding the performance of the two Trichogramma species (and potential other Trichogramma species) towards C. pomonella eggs in the field to identify the best biocontrol candidate.
Human Factors Assessment and Redesign of the ISS Respiratory Support Pack (RSP) Cue Card
NASA Technical Reports Server (NTRS)
Byrne, Vicky; Hudy, Cynthia; Whitmore, Mihriban; Smith, Danielle
2007-01-01
The Respiratory Support Pack (RSP) is a medical pack onboard the International Space Station (ISS) that contains much of the necessary equipment for providing aid to a conscious or unconscious crewmember in respiratory distress. Inside the RSP lid pocket is a 5.5 by 11 inch paper procedural cue card, which is used by a Crew Medical Officer (CMO) to set up the equipment and deliver oxygen to a crewmember. In training, crewmembers expressed concerns about the readability and usability of the cue card; consequently, updating the cue card was prioritized as an activity to be completed. The Usability Testing and Analysis Facility at the Johnson Space Center (JSC) evaluated the original layout of the cue card, and proposed several new cue card designs based on human factors principles. The approach taken for the assessment was an iterative process. First, in order to completely understand the issues with the RSP cue card, crewmember post training comments regarding the RSP cue card were taken into consideration. Over the course of the iterative process, the procedural information was reorganized into a linear flow after the removal of irrelevant (non-emergency) content. Pictures, color coding, and borders were added to highlight key components in the RSP to aid in quickly identifying those components. There were minimal changes to the actual text content. Three studies were conducted using non-medically trained JSC personnel (total of 34 participants). Non-medically trained personnel participated in order to approximate a scenario of limited CMO exposure to the RSP equipment and training (which can occur six months prior to the mission). In each study, participants were asked to perform two respiratory distress scenarios using one of the cue card designs to simulate resuscitation (using a mannequin along with the hardware). Procedure completion time, errors, and subjective ratings were recorded. The last iteration of the cue card featured a schematic of the RSP, colors, borders, and simplification of the flow of information. The time to complete the RSP procedure was reduced by approximately three minutes with the new design. In an emergency situation, three minutes significantly increases the probability of saving a life. In addition, participants showed the highest preference for this design. The results of the studies and the new design were presented to a focus group of astronauts, flight surgeons, medical trainers, and procedures personnel. The final cue card was presented to a medical control board and approved for flight. The revised RSP cue card is currently onboard ISS.
Testing novel patient financial incentives to increase breast cancer screening.
Merrick, Elizabeth Levy; Hodgkin, Dominic; Horgan, Constance M; Lorenz, Laura S; Panas, Lee; Ritter, Grant A; Kasuba, Paul; Poskanzer, Debra; Nefussy, Renee Altman
2015-11-01
To examine the effects of 3 types of low-cost financial incentives for patients, including a novel "person-centered" approach on breast cancer screening (mammogram) rates. Randomized controlled trial with 4 arms: 3 types of financial incentives ($15 gift card, entry into lottery for $250 gift card, and a person-centered incentive with choice of $15 gift card or lottery) and a control group. Sample included privately insured Tufts Health Plan members in Massachusetts who were women aged 42 to 69 years with no mammogram claim in ≥ 2.6 years. A sample of 4700 eligible members were randomized to 4 study arms. The control group received a standard reminder letter and the incentive groups received a reminder letter plus an incentive offer for obtaining a mammogram within the next 4 months. Bivariate tests and multivariate logistic regression were used to assess the incentives' impact on mammogram receipt. Data were analyzed for 4427 members (after exclusions such as undeliverable mail). The percent of members receiving a mammogram during the study was 11.7% (gift card), 12.1% (lottery), 13.4% (person-centered/choice), and 11.9% (controls). Differences were not statistically significant in bivariate or multivariate full-sample analyses. In exploratory subgroup analyses of members with a mammogram during the most recent year prior to the study-defined gap, person-centered incentives were associated with a higher likelihood of mammogram receipt. None of the low-cost incentives tested had a statistically significant effect on mammogram rates in the full sample. Exploratory findings for members who were more recently screened suggest that they may be more responsive to person-centered incentives.
Isothermal thermogravimetric data acquisition analysis system
NASA Technical Reports Server (NTRS)
Cooper, Kenneth, Jr.
1991-01-01
The description of an Isothermal Thermogravimetric Analysis (TGA) Data Acquisition System is presented. The system consists of software and hardware to perform a wide variety of TGA experiments. The software is written in ANSI C using Borland's Turbo C++. The hardware consists of a 486/25 MHz machine with a Capital Equipment Corp. IEEE488 interface card. The interface is to a Hewlett Packard 3497A data acquisition system using two analog input cards and a digital actuator card. The system provides for 16 TGA rigs with weight and temperature measurements from each rig. Data collection is conducted in three phases. Acquisition is done at a rapid rate during initial startup, at a slower rate during extended data collection periods, and finally at a fast rate during shutdown. Parameters controlling the rate and duration of each phase are user programmable. Furnace control (raising and lowering) is also programmable. Provision is made for automatic restart in the event of power failure or other abnormal terminations. Initial trial runs were conducted to show system stability.
A versatile small form factor twisted-pair TFC FMC for MTCA AMCs
NASA Astrophysics Data System (ADS)
Meder, L.; Lebedev, J.; Becker, J.
2017-03-01
In continuous readout systems of particle physics experiments, the provision of a common clock and time reference and the distribution of critical low latency messages to the processing and fronted layers of the readout are crucial tasks. In the context of the Compressed Baryonic Matter (CBM) experiment, a versatile small form factor Timing and Fast-Control (TFC) interfacing FPGA Mezzanine Card (FMC) was developed, offering bidirectional twisted-pair (TP) links for the communication between TFC nodes. Also a versatile clocking including voltage controlled oscillators and a connection to the telecommunication clock lines of mTCA crates are available. Being designed for both TFC Master and Slaves, the card allows rapid system developments without additional Slave hardware circuits. Measurements show that it is possible to transmit over cable lengths of 25 m at a rate of 240 Mbit/s for all data channels simultaneously. A TFC Master-Slave system using two of these cards can be synchronized with a precision of ±10 ps to an user-defined phase setpoint.
Development of Data Acquisition Card Driver for ICRH System on EAST
NASA Astrophysics Data System (ADS)
Liu, Daming; Luo, Jiarong; Zhao, Yanping; Qin, Chengming
2008-04-01
Presented in this paper is the development of the driver for the data acquisition card with a peripheral component interconnection (PCI) local bus on the ion cyclotron range of frequency heating (ICRH) system. The driver is mainly aimed at the embedded VxWorks system (real-time operating system) which is widely used in various fields of real-time systems. An efficient way is employed to develop this driver, which will advance the real-time control of the ICRH system on the experimental advanced superconductor tokamak (EAST). The driver is designed using the TORNADO integrated development environment (IDE), and implemented in C plus language. The details include the hardware configuration, analogue/digital (A/D) and digital/analogue (D/A) conversion, input and output (I/O) operation of the driver to support over five cards. The data acquisition card can be manipulated in a low-level program and meet the requirements of A/D conversion and D/A outputs.
26 CFR 301.6311-2 - Payment by credit card and debit card.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 26 Internal Revenue 18 2012-04-01 2012-04-01 false Payment by credit card and debit card. 301.6311....6311-2 Payment by credit card and debit card. (a) Authority to receive—(1) Payments by credit card and debit card. Internal revenue taxes may be paid by credit card or debit card as authorized by this...
26 CFR 301.6311-2 - Payment by credit card and debit card.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 26 Internal Revenue 18 2011-04-01 2011-04-01 false Payment by credit card and debit card. 301.6311....6311-2 Payment by credit card and debit card. (a) Authority to receive—(1) Payments by credit card and debit card. Internal revenue taxes may be paid by credit card or debit card as authorized by this...
26 CFR 301.6311-2 - Payment by credit card and debit card.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 26 Internal Revenue 18 2013-04-01 2013-04-01 false Payment by credit card and debit card. 301.6311....6311-2 Payment by credit card and debit card. (a) Authority to receive—(1) Payments by credit card and debit card. Internal revenue taxes may be paid by credit card or debit card as authorized by this...
26 CFR 301.6311-2 - Payment by credit card and debit card.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 26 Internal Revenue 18 2014-04-01 2014-04-01 false Payment by credit card and debit card. 301.6311....6311-2 Payment by credit card and debit card. (a) Authority to receive—(1) Payments by credit card and debit card. Internal revenue taxes may be paid by credit card or debit card as authorized by this...
7 CFR 274.5 - Record retention and forms security.
Code of Federal Regulations, 2014 CFR
2014-01-01
... reconciliation process. (c) Accountable documents. (1) EBT cards shall be considered accountable documents. The... validation of inventory controls and records by parties not otherwise involved in maintaining control records...
7 CFR 274.5 - Record retention and forms security.
Code of Federal Regulations, 2013 CFR
2013-01-01
... reconciliation process. (c) Accountable documents. (1) EBT cards shall be considered accountable documents. The... validation of inventory controls and records by parties not otherwise involved in maintaining control records...
7 CFR 274.5 - Record retention and forms security.
Code of Federal Regulations, 2012 CFR
2012-01-01
... reconciliation process. (c) Accountable documents. (1) EBT cards shall be considered accountable documents. The... validation of inventory controls and records by parties not otherwise involved in maintaining control records...
ERIC Educational Resources Information Center
Zuzack, Christine A.
1997-01-01
Enhanced magnetic strip cards and "smart cards" offer varied service options to college students. Enhanced magnetic strip cards serve as cash cards and provide access to services. Smart cards, which resemble credit cards but contain a microchip, can be used as phone cards, bus passes, library cards, admission tickets, point-of-sale debit…
Performance of patients with schizophrenia on the Wisconsin Card Sorting Test (WCST).
Everett, J; Lavoie, K; Gagnon, J F; Gosselin, N
2001-03-01
To directly compare the performance of patients with schizophrenia and control subjects on the Wisconsin Card Sorting Test (WCST). Specifically, we sought to verify if there are significant differences on the "classical" WCST measurements (perseverative errors and number of categories), as well as on more rarely reported scores, and assess the extent to which patients with schizophrenia can improve their performance with card-by-card instructions and continuous verbal reinforcement. Prospective cross-sectional study. Psychiatry department in a university-affiliated hospital. 30 patients with schizophrenia, diagnosed according to DSM-IV criteria, and 30 control subjects, matched to patients according to age and education. The WCST was administered according to the criteria of Heaton, and a subgroup of the patients with schizophrenia was given a retest after an explanation of the WCST and verbal reinforcements. Patients with schizophrenia succeeded on fewer categories (t = 23.3, p < 0.001), committed more perseverative errors (t = 15.6, p < 0.001), made more perseverative responses (t = 14.6, p < 0.001), needed more trials to succeed at the first category (t = 9.2, p < 0.003) and gave significantly lower conceptual level responses (t = 14.1, p < 0.001) than the controls. However, on retest, patients with schizophrenia committed significantly fewer perseverative errors (t = 5.1, p < 0.001) and showed higher conceptual level responses (t = -3.45, p < 0.003). Consistent with a hypothesis of frontal dysfunction in schizophrenia, patients with schizophrenia tend to show a perseverative deficit; however, some are able to partially overcome this deficit when given verbal reinforcement.
Performance of patients with schizophrenia on the Wisconsin Card Sorting Test (WCST).
Everett, J; Lavoie, K; Gagnon, J F; Gosselin, N
2001-01-01
OBJECTIVE: To directly compare the performance of patients with schizophrenia and control subjects on the Wisconsin Card Sorting Test (WCST). Specifically, we sought to verify if there are significant differences on the "classical" WCST measurements (perseverative errors and number of categories), as well as on more rarely reported scores, and assess the extent to which patients with schizophrenia can improve their performance with card-by-card instructions and continuous verbal reinforcement. DESIGN: Prospective cross-sectional study. SETTING: Psychiatry department in a university-affiliated hospital. PARTICIPANTS: 30 patients with schizophrenia, diagnosed according to DSM-IV criteria, and 30 control subjects, matched to patients according to age and education. INTERVENTION: The WCST was administered according to the criteria of Heaton, and a subgroup of the patients with schizophrenia was given a retest after an explanation of the WCST and verbal reinforcements. RESULTS: Patients with schizophrenia succeeded on fewer categories (t = 23.3, p < 0.001), committed more perseverative errors (t = 15.6, p < 0.001), made more perseverative responses (t = 14.6, p < 0.001), needed more trials to succeed at the first category (t = 9.2, p < 0.003) and gave significantly lower conceptual level responses (t = 14.1, p < 0.001) than the controls. However, on retest, patients with schizophrenia committed significantly fewer perseverative errors (t = 5.1, p < 0.001) and showed higher conceptual level responses (t = -3.45, p < 0.003). CONCLUSION: Consistent with a hypothesis of frontal dysfunction in schizophrenia, patients with schizophrenia tend to show a perseverative deficit; however, some are able to partially overcome this deficit when given verbal reinforcement. PMID:11291529
Haghani, Fariba; Hatef Khorami, Mohammad; Fakhari, Mohammad
2016-07-01
Feedback cards are recommended as a feasible tool for structured written feedback delivery in clinical education while effectiveness of this tool on the medical students' performance is still questionable. The purpose of this study was to compare the effects of structured written feedback by cards as well as verbal feedback versus verbal feedback alone on the clinical performance of medical students at the Mini Clinical Evaluation Exercise (Mini-CEX) test in an outpatient clinic. This is a quasi-experimental study with pre- and post-test comprising four groups in two terms of medical students' externship. The students' performance was assessed through the Mini-Clinical Evaluation Exercise (Mini-CEX) as a clinical performance evaluation tool. Structured written feedbacks were given to two experimental groups by designed feedback cards as well as verbal feedback, while in the two control groups feedback was delivered verbally as a routine approach in clinical education. By consecutive sampling method, 62 externship students were enrolled in this study and seven students were excluded from the final analysis due to their absence for three days. According to the ANOVA analysis and Post Hoc Tukey test, no statistically significant difference was observed among the four groups at the pre-test, whereas a statistically significant difference was observed between the experimental and control groups at the post-test (F = 4.023, p =0.012). The effect size of the structured written feedbacks on clinical performance was 0.19. Structured written feedback by cards could improve the performance of medical students in a statistical sense. Further studies must be conducted in other clinical courses with longer durations.
Assessment of the RNASound RNA Sampling Card for the Preservation of Influenza Virus RNA
Lau, Hilda; Hurt, Aeron C.
2016-01-01
Shipping influenza virus specimens, isolates or purified RNA is normally conducted at ultra-low temperatures using dry ice to ensure minimal degradation of the samples but this is expensive and requires special packaging and shipping conditions. Therefore, alternative methods for shipping influenza viruses or RNA at ambient temperatures would be desirable. The RNASound RNA Sampling Card (FortiusBio LLC, San Diego, CA, USA) is a device that enables specimens or isolates to be applied to a card, whereby viruses are inactivated, while RNA is preserved and purified RNA can also easily be eluted. To evaluate this card, we applied influenza virus cell culture isolate supernatants to either the RNASound card or Whatman Grade No. 1 filter paper (GE Healthcare, Rydalmere, NSW, Australia) and compared the preservation to that of material stored in liquid form. Preservation was tested using influenza A and B viruses at two different storage temperatures [cool (2–8°C) or room temperature (18–22°C)] and these were compared with control material stored at -80°C, for 7, 14, or 28 days. The quality of the RNA recovered was assessed using real time RT-PCR and Sanger sequencing. The RNASound card was effective in preserving influenza RNA at room temperature for up to 28 days, with only a minor change in real-time RT-PCR cycle threshold values for selected gene targets when comparing between viruses applied to the card or stored at -80°C. Similar results were obtained with filter paper, whilst virus in liquid form performed the worst. Nevertheless, as the RNASound card also has the capability to inactivate viruses in addition to preserving RNA at room temperature for many weeks, this makes it feasible to send samples to laboratories using regular mail, and thus avoid the need for expensive shipping conditions requiring biohazard containers and dry ice. Moreover, the quick and simple RNA recovery from the RNASound card allows recipient labs to obtain RNA without the need for special reagents or equipment. PMID:27853455
3D multiplayer virtual pets game using Google Card Board
NASA Astrophysics Data System (ADS)
Herumurti, Darlis; Riskahadi, Dimas; Kuswardayan, Imam
2017-08-01
Virtual Reality (VR) is a technology which allows user to interact with the virtual environment. This virtual environment is generated and simulated by computer. This technology can make user feel the sensation when they are in the virtual environment. The VR technology provides real virtual environment view for user and it is not viewed from screen. But it needs another additional device to show the view of virtual environment. This device is known as Head Mounted Device (HMD). Oculust Rift and Microsoft Hololens are the most famous HMD devices used in VR. And in 2014, Google Card Board was introduced at Google I/O developers conference. Google Card Board is VR platform which allows user to enjoy the VR with simple and cheap way. In this research, we explore Google Card Board to develop simulation game of raising pet. The Google Card Board is used to create view for the VR environment. The view and control in VR environment is built using Unity game engine. And the simulation process is designed using Finite State Machine (FSM). This FSM can help to design the process clearly. So the simulation process can describe the simulation of raising pet well. Raising pet is fun activity. But sometimes, there are many conditions which cause raising pet become difficult to do, i.e. environment condition, disease, high cost, etc. this research aims to explore and implement Google Card Board in simulation of raising pet.
[Application of patient card technology to health care].
Sayag, E; Danon, Y L
1995-03-15
The potential benefits of patient card technology in improving management and delivery of health services have been explored. Patient cards can be used for numerous applications and functions: as a means of identification, as a key for an insurance payment system, and as a communication medium. Advanced card technologies allow for the storage of data on the card, creating the possibility of a comprehensive and portable patient record. There are many types of patient cards: paper or plastic cards, microfilm cards, bar-code cards, magnetic-strip cards and integrated circuit smart-cards. Choosing the right card depends on the amount of information to be stored, the degree of security required and the cost of the cards and their supporting infrastructure. Problems with patient cards are related to storage capacity, backup and data consistency, access authorization and ownership and compatibility. We think it is worth evaluating the place of patient card technology in the delivery of health services in Israel.
CAS. Controlled Access Security
DOE Office of Scientific and Technical Information (OSTI.GOV)
Martinez, B.; Pomeroy, G.
1989-12-01
The Security Alarm System is a data acquisition and control system which collects data from intrusion sensors and displays the information in a real-time environment for operators. The Access Control System monitors and controls the movement of personnel with the use of card readers and biometrics hand readers.
Morgan, Amy J; Rapee, Ronald M; Bayer, Jordana K
2017-08-01
Background/aims Achieving a high response rate to follow-up questionnaires in randomized controlled trials of interventions is important for study validity. Few studies have tested the value of incentives in increasing response rates to online questionnaires in clinical trials of health interventions. This study evaluated the effect of a gift card prize-draw incentive on response rates to follow-up questionnaires within a trial of an online health intervention. Method The study was embedded in a host randomized controlled trial of an online parenting program for child anxiety. A total of 433 participants were randomly allocated to one of two groups: (1) being informed that they would enter a gift card prize-draw if they completed the final study questionnaire (24-week follow-up) and (2) not informed about the prize-draw. All participants had a 1 in 20 chance of winning an AUD50 gift card after they completed the online questionnaire. Results The odds of the informed group completing the follow-up questionnaire were significantly higher than the uninformed group, (79.6% vs 68.5%, odds ratio = 1.79, 95% confidence interval = 1.15-2.79). This response rate increase of 11.1% (95% confidence interval = 2.8-19.1) occurred in both intervention and control groups in the host randomized controlled trial. The incentive was also effective in increasing questionnaire commencement (84.6% vs 75.9%, odds ratio = 1.74, 95% confidence interval = 1.07-2.84) and reducing the delay in completing the questionnaire (19.9 vs 22.6 days, hazard ratio = 1.34, 95% confidence interval = 1.07-1.67). Conclusion This study adds to evidence for the effectiveness of incentives to increase response rates to follow-up questionnaires in health intervention trials.
Friedline, Terri; West, Stacia; Rosell, Nehemiah; Serido, Joyce; Shim, Soyeon
2017-03-01
This study examines the extent of emergent, outstanding credit card debt among young adult college students and investigates whether any associations existed between this credit card debt and the characteristics of the communities in which these students grew up or lived. Using data (N = 748) from a longitudinal survey and merging community characteristics measured at the zip code level, we confirmed that a community's unemployment rate, average total debt, average credit score, and number of bank branch offices were associated with a young adult college student's acquisition and accumulation of credit card debt. For example, a community's higher unemployment rate and lower number of bank branches were associated with a young adult college student's greater accumulated debt. Community characteristics had the strongest associations with credit card debt, especially after controlling for individual characteristics (i.e., a young adult college student's race and financial independence) and familial characteristics (i.e., their parents' income and parents' discussions of financial matters while growing up at home). The findings may help to understand the unique roles that communities play in shaping children and young adults' financial capability, and how communities can be better capacitated to support the financial goals of their residents. © Society for Community Research and Action 2017.
Study of the NASTRAN input/output systems
NASA Technical Reports Server (NTRS)
Brown, W. K.; Schoellmann, W. F.
1977-01-01
The basic characteristics of the NASTRAN level 16 I/O subsystem are presented with particular reference to blocking/deblocking aspects, I/O methods used on the IBM, CDC, and UNIVAC machines, definition of basic NASTRAN I/O control tables, and portability of parts of the I/O subsystem to other programs outside the NASTRAN environment are included. An explanation of the IBM primary, secondary, and tertiary files defined by the data definition (DD) cards in the NASTRAN JCL procedure. The explanation is intended to enlighten users as to the purpose of these DD cards, how they relate to one another, and why there are no similar type definition cards required on the CDC and UNIVAC versions. Enhancements designed to increase overall efficiency and decrease core requirements are also recommended.
NASA Astrophysics Data System (ADS)
Thiebaud, P.; Cross, D. C.
1980-07-01
A new solid-state radar switchboard equipped with 16 input ports which will output data to 16 displays is presented. Each of the ports will handle a single two-dimensional radar input, or three ports will accommodate a three-dimensional radar input. A video switch card of the switchboard is used to switch all signals, with the exception of the IFF-mode-control lines. Each card accepts inputs from up to 16 sources and can pass a signal with bandwidth greater than 20 MHz to the display assigned to that card. The synchro amplifier of current systems has been eliminated and in the new design each PPI receives radar data via a single coaxial cable. This significant reduction in cabling is achieved by adding a serial-to-parallel interface and a digital-to-synchro converter located at the PPI.
Computer program CDCID: an automated quality control program using CDC update
DOE Office of Scientific and Technical Information (OSTI.GOV)
Singer, G.L.; Aguilar, F.
1984-04-01
A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. Themore » computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Martinez, B.; Pomeroy, G.
1989-12-02
The Security Alarm System is a data acquisition and control system which collects data from intrusion sensors and displays the information in a real-time environment for operators. The Access Control System monitors and controls the movement of personnel with the use of card readers and biometrics hand readers.
Numerical study of the vortex tube reconnection using vortex particle method on many graphics cards
NASA Astrophysics Data System (ADS)
Kudela, Henryk; Kosior, Andrzej
2014-08-01
Vortex Particle Methods are one of the most convenient ways of tracking the vorticity evolution. In the article we presented numerical recreation of the real life experiment concerning head-on collision of two vortex rings. In the experiment the evolution and reconnection of the vortex structures is tracked with passive markers (paint particles) which in viscous fluid does not follow the evolution of vorticity field. In numerical computations we showed the difference between vorticity evolution and movement of passive markers. The agreement with the experiment was very good. Due to problems with very long time of computations on a single processor the Vortex-in-Cell method was implemented on the multicore architecture of the graphics cards (GPUs). Vortex Particle Methods are very well suited for parallel computations. As there are myriads of particles in the flow and for each of them the same equations of motion have to be solved the SIMD architecture used in GPUs seems to be perfect. The main disadvantage in this case is the small amount of the RAM memory. To overcome this problem we created a multiGPU implementation of the VIC method. Some remarks on parallel computing are given in the article.
Kinematics and Dynamics of Motion Control Based on Acceleration Control
NASA Astrophysics Data System (ADS)
Ohishi, Kiyoshi; Ohba, Yuzuru; Katsura, Seiichiro
The first IEEE International Workshop on Advanced Motion Control was held in 1990 pointed out the importance of physical interpretation of motion control. The software servoing technology is now common in machine tools, robotics, and mechatronics. It has been intensively developed for the numerical control (NC) machines. Recently, motion control in unknown environment will be more and more important. Conventional motion control is not always suitable due to the lack of adaptive capability to the environment. A more sophisticated ability in motion control is necessary for compliant contact with environment. Acceleration control is the key technology of motion control in unknown environment. The acceleration control can make a motion system to be a zero control stiffness system without losing the robustness. Furthermore, a realization of multi-degree-of-freedom motion is necessary for future human assistance. A human assistant motion will require various control stiffness corresponding to the task. The review paper focuses on the modal coordinate system to integrate the various control stiffness in the virtual axes. A bilateral teleoperation is a good candidate to consider the future human assistant motion and integration of decentralized systems. Thus the paper reviews and discusses the bilateral teleoperation from the control stiffness and the modal control design points of view.
[New electronic data carriers in Bosnia-Herzegovina].
Masić, I; Pandza, H; Knezević, Z; Toromanović, S
1999-01-01
Bosnia and Herzegovina has been developing new Health Care System based on Electronic Registration Card. Developing countries proceeded from the manual and semiautomatic method of medical data processing to the new method of entering, storage, transfer, searching and protection of data using electronic equipment. Currently, many European countries have developed a Medical Card Based Electronic Information System. Both technologies offer the advantages and disadvantages. Three types of electronic card are currently in use: Hybrid Card, Smart Card and Laser Card. Hybrid Card offers characteristics of both Smart Card and Laser Card. The differences among these cards, such as a capacity, total price, price per byte, security system are discussed here. The dilemma is, which card should be used as a data carrier. The Electronic Family Registration Card is a question of strategic interest for B&H, but also a big investment. We should avoid the errors of other countries that have been developing card-based system. In this article we present all mentioned cards and compare advantages and disadvantages of different technologies.
Design on the x-ray oral digital image display card
NASA Astrophysics Data System (ADS)
Wang, Liping; Gu, Guohua; Chen, Qian
2009-10-01
According to the main characteristics of X-ray imaging, the X-ray display card is successfully designed and debugged using the basic principle of correlated double sampling (CDS) and combined with embedded computer technology. CCD sensor drive circuit and the corresponding procedures have been designed. Filtering and sampling hold circuit have been designed. The data exchange with PC104 bus has been implemented. Using complex programmable logic device as a device to provide gating and timing logic, the functions which counting, reading CPU control instructions, corresponding exposure and controlling sample-and-hold have been completed. According to the image effect and noise analysis, the circuit components have been adjusted. And high-quality images have been obtained.
Mechanization of Cataloging Procedures *
Kilgour, Frederick G.
1965-01-01
The Columbia-Harvard-Yale Medical Libraries Computerization Project has put into operation its mechanized procedure for the production of catalog cards. Cards produced are in final form ready to be filed into a card catalog. Catalogers prepare copy on a worksheet from which punched cards are punched. An IBM 1401 computer processes the decklets of punched cards on magnetic tape to produce the expanded decklets of punched cards needed to print the various packs of catalog cards required to go into different catalogs. Next, the computer punches the expanded decklets of cards to operate an 870 Document Writer, which types out the catalog cards in final form. Cost of cards ready to file is 12.5 cents per card. Images PMID:14271110
Commercial Off-The-Shelf (COTS) Graphics Processing Board (GPB) Radiation Test Evaluation Report
NASA Technical Reports Server (NTRS)
Salazar, George A.; Steele, Glen F.
2013-01-01
Large round trip communications latency for deep space missions will require more onboard computational capabilities to enable the space vehicle to undertake many tasks that have traditionally been ground-based, mission control responsibilities. As a result, visual display graphics will be required to provide simpler vehicle situational awareness through graphical representations, as well as provide capabilities never before done in a space mission, such as augmented reality for in-flight maintenance or Telepresence activities. These capabilities will require graphics processors and associated support electronic components for high computational graphics processing. In an effort to understand the performance of commercial graphics card electronics operating in the expected radiation environment, a preliminary test was performed on five commercial offthe- shelf (COTS) graphics cards. This paper discusses the preliminary evaluation test results of five COTS graphics processing cards tested to the International Space Station (ISS) low earth orbit radiation environment. Three of the five graphics cards were tested to a total dose of 6000 rads (Si). The test articles, test configuration, preliminary results, and recommendations are discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hubin, Elizabeth A.; Fay, Allison; Xu, Catherine
RbpA and CarD are essential transcription regulators in mycobacteria. Mechanistic analyses of promoter open complex (RPo) formation establish that RbpA and CarD cooperatively stimulate formation of an intermediate (RP2) leading to RPo; formation of RP2 is likely a bottleneck step at the majority of mycobacterial promoters. Once RPo forms, CarD also disfavors its isomerization back to RP2. We determined a 2.76 Å-resolution crystal structure of a mycobacterial transcription initiation complex (TIC) with RbpA as well as a CarD/RbpA/TIC model. Both CarD and RbpA bind near the upstream edge of the -10 element where they likely facilitate DNA bending and impedemore » transcription bubble collapse. In vivo studies demonstrate the essential role of RbpA, show the effects of RbpA truncations on transcription and cell physiology, and indicate additional functions for RbpA not evident in vitro. This work provides a framework to understand the control of mycobacterial transcription by RbpA and CarD.« less
LabVIEW Interface for PCI-SpaceWire Interface Card
NASA Technical Reports Server (NTRS)
Lux, James; Loya, Frank; Bachmann, Alex
2005-01-01
This software provides a LabView interface to the NT drivers for the PCISpaceWire card, which is a peripheral component interface (PCI) bus interface that conforms to the IEEE-1355/ SpaceWire standard. As SpaceWire grows in popularity, the ability to use SpaceWire links within LabVIEW will be important to electronic ground support equipment vendors. In addition, there is a need for a high-level LabVIEW interface to the low-level device- driver software supplied with the card. The LabVIEW virtual instrument (VI) provides graphical interfaces to support all (1) SpaceWire link functions, including message handling and routing; (2) monitoring as a passive tap using specialized hardware; and (3) low-level access to satellite mission-control subsystem functions. The software is supplied in a zip file that contains LabVIEW VI files, which provide various functions of the PCI-SpaceWire card, as well as higher-link-level functions. The VIs are suitably named according to the matching function names in the driver manual. A number of test programs also are provided to exercise various functions.
Reconfigurable multiport EPON repeater
NASA Astrophysics Data System (ADS)
Oishi, Masayuki; Inohara, Ryo; Agata, Akira; Horiuchi, Yukio
2009-11-01
An extended reach EPON repeater is one of the solutions to effectively expand FTTH service areas. In this paper, we propose a reconfigurable multi-port EPON repeater for effective accommodation of multiple ODNs with a single OLT line card. The proposed repeater, which has multi-ports in both OLT and ODN sides, consists of TRs, BTRs with the CDR function and a reconfigurable electrical matrix switch, can accommodate multiple ODNs to a single OLT line card by controlling the connection of the matrix switch. Although conventional EPON repeaters require full OLT line cards to accommodate subscribers from the initial installation stage, the proposed repeater can dramatically reduce the number of required line cards especially when the number of subscribers is less than a half of the maximum registerable users per OLT. Numerical calculation results show that the extended reach EPON system with the proposed EPON repeater can save 17.5% of the initial installation cost compared with a conventional repeater, and can be less expensive than conventional systems up to the maximum subscribers especially when the percentage of ODNs in lightly-populated areas is higher.
CARD 2017: expansion and model-centric curation of the comprehensive antibiotic resistance database
Jia, Baofeng; Raphenya, Amogelang R.; Alcock, Brian; Waglechner, Nicholas; Guo, Peiyao; Tsang, Kara K.; Lago, Briony A.; Dave, Biren M.; Pereira, Sheldon; Sharma, Arjun N.; Doshi, Sachin; Courtot, Mélanie; Lo, Raymond; Williams, Laura E.; Frye, Jonathan G.; Elsayegh, Tariq; Sardar, Daim; Westman, Erin L.; Pawlowski, Andrew C.; Johnson, Timothy A.; Brinkman, Fiona S.L.; Wright, Gerard D.; McArthur, Andrew G.
2017-01-01
The Comprehensive Antibiotic Resistance Database (CARD; http://arpcard.mcmaster.ca) is a manually curated resource containing high quality reference data on the molecular basis of antimicrobial resistance (AMR), with an emphasis on the genes, proteins and mutations involved in AMR. CARD is ontologically structured, model centric, and spans the breadth of AMR drug classes and resistance mechanisms, including intrinsic, mutation-driven and acquired resistance. It is built upon the Antibiotic Resistance Ontology (ARO), a custom built, interconnected and hierarchical controlled vocabulary allowing advanced data sharing and organization. Its design allows the development of novel genome analysis tools, such as the Resistance Gene Identifier (RGI) for resistome prediction from raw genome sequence. Recent improvements include extensive curation of additional reference sequences and mutations, development of a unique Model Ontology and accompanying AMR detection models to power sequence analysis, new visualization tools, and expansion of the RGI for detection of emergent AMR threats. CARD curation is updated monthly based on an interplay of manual literature curation, computational text mining, and genome analysis. PMID:27789705
Role of two insect growth regulators in integrated pest management of citrus scales.
Grafton-Cardwell, E E; Lee, J E; Stewart, J R; Olsen, K D
2006-06-01
Portions of two commercial citrus orchards were treated for two consecutive years with buprofezin or three consecutive years with pyriproxyfen in a replicated plot design to determine the long-term impact of these insect growth regulators (IGRs) on the San Joaquin Valley California integrated pest management program. Pyriproxyfen reduced the target pest, California red scale, Aonidiella aurantii Maskell, to nondetectable levels on leaf samples approximately 4 mo after treatment. Pyriproxyfen treatments reduced the California red scale parasitoid Aphytis melinus DeBach to a greater extent than the parasitoid Comperiella bifasciata Howard collected on sticky cards. Treatments of lemons Citrus limon (L.) Burm. f. infested with scale parasitized by A. melinus showed only 33% direct mortality of the parasitoid, suggesting the population reduction observed on sticky cards was due to low host density. Three years of pyriproxyfen treatments did not maintain citricola scale, Coccus pseudomagnoliarum (Kuwana), below the treatment threshold and cottony cushion scale, Icerya purchasi Maskell, was slowly but incompletely controlled. Buprofezin reduced California red scale to very low but detectable levels approximately 5 mo after treatment. Buprofezin treatments resulted in similar levels of reduction of the two parasitoids A. melinus and C. bifasciata collected on sticky cards. Treatments of lemons infested with scale parasitized by A. melinus showed only 7% mortality of the parasitoids, suggesting the population reduction observed on sticky cards was due to low host density. Citricola scale was not present in this orchard, and cottony cushion scale was slowly and incompletely controlled by buprofezin. These field plots demonstrated that IGRs can act as organophosphate insecticide replacements for California red scale control; however, their narrower spectrum of activity and disruption of coccinellid beetles can allow other scale species to attain primary pest status.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Avramova, Maria; Blyth, Taylor S.; Salko, Robert K.
This document describes how to make a CTF input deck. A CTF input deck is organized into Card Groups and Cards. A Card Group is a collection of Cards. A Card is defined as a line of input. Each Card may contain multiple data. A Card is terminated by making a new line.
Stille, C J; Christison-Lagay, J; Bernstein, B A; Dworkin, P H
2001-07-01
We sought to determine if a simple educational intervention initiated at the first well-child care visit, with reinforcement at subsequent visits, can improve inner-city infant immunization rates. We conducted a controlled trial involving 315 newborn infants and their primary caregivers in 3 inner-city primary care centers. Child health care providers gave caregivers in the intervention group an interactive graphic card with verbal reinforcement. At later visits, stickers were applied to the card when immunizations were given. Routine information was given to controls. After the trial, age-appropriate immunization rates at 7 months were 58% in each group. Intervention infants had 50% fewer missed opportunities to immunize (p=0.01) but cancelled 77% more appointments (p=0.04) than controls. We conclude that a brief educational intervention at the first well-child care visit did not boost 7-month immunization rates, although it was associated with fewer missed opportunities to immunize.
Mohan, Kathleen M; Miller, Joseph M; Harvey, Erin M; Gerhart, Kimberly D; Apple, Howard P; Apple, Deborah; Smith, Jordana M; Davis, Amy L; Leonard-Green, Tina; Campus, Irene; Dennis, Leslie K
2016-01-01
To determine if testing binocular visual acuity in infants and toddlers using the Acuity Card Procedure (ACP) with electronic grating stimuli yields clinically useful data. Participants were infants and toddlers ages 5 to 36.7 months referred by pediatricians due to failed automated vision screening. The ACP was used to test binocular grating acuity. Stimuli were presented on the Dobson Card. The Dobson Card consists of a handheld matte-black plexiglass frame with two flush-mounted tablet computers and is similar in size and form to commercially available printed grating acuity testing stimuli (Teller Acuity Cards II [TACII]; Stereo Optical, Inc., Chicago, IL). On each trial, one tablet displayed a square-wave grating and the other displayed a luminance-matched uniform gray patch. Stimuli were roughly equivalent to the stimuli available in the printed TACII stimuli. After acuity testing, each child received a cycloplegic eye examination. Based on cycloplegic retinoscopy, patients were categorized as having high or low refractive error per American Association for Pediatric Ophthalmology and Strabismus vision screening referral criteria. Mean acuities for high and low refractive error groups were compared using analysis of covariance, controlling for age. Mean visual acuity was significantly poorer in children with high refractive error than in those with low refractive error (P = .015). Electronic stimuli presented using the ACP can yield clinically useful measurements of grating acuity in infants and toddlers. Further research is needed to determine the optimal conditions and procedures for obtaining accurate and clinically useful automated measurements of visual acuity in infants and toddlers. Copyright 2016, SLACK Incorporated.
Maw, Min Thein; Yamaguchi, Tsuyoshi; Kasanga, Christopher J; Terasaki, Kaori; Fukushi, Hideto
2006-12-01
A practical sampling method for bursal tissue using ordinary paper for molecular diagnosis of infectious bursal disease (IBD) was established. IBD virus-infected bursa was directly smeared on chromatography paper, filter paper, or stationery copy paper and was then fixed with absolute ethanol, Tris-HCl-saturated phenol, or phenol:chloroform:isoamyl alcohol (25:24:1). Flinders Technology Associates (FTA) card, which is designed for the collection of biological samples for molecular detection, was also used. After storage at 37 C for up to 30 days, total RNA directly extracted from the tissue fixed on the papers and FTA card were subjected to reverse transcriptase-polymerase chain reaction (RT-PCR) for detection of IBD virus (IBDV) RNA. In addition, the ability of each chemical used in the fixation and the FTA card to inactivate IBDV was evaluated. Regardless of the paper quality, storage period, and fixation method, IBDV RNA was consistently detected in all of the samples. IBDV in the bursal tissue was inactivated with phenol but not with ethanol or the unknown chemicals in FTA card. These results show that ordinary papers sustain the viral RNA, as does FTA card, but phenol fixation is superior to FTA card in inactivating IBDV. The new sampling method using ordinary paper with phenol fixation is safe, inexpensive, simple, and easy, and is thus suitable for conducting a global survey of IBD even where laboratory resources are limited. This practical method should contribute to the control of IBD worldwide.
29 CFR 4.123 - Administrative limitations, variances, tolerances, and exemptions.
Code of Federal Regulations, 2011 CFR
2011-07-01
... servicing of cards (including credit cards, debit cards, purchase cards, smart cards, and similar card... military personnel in buying and selling homes (which shall not include actual moving or storage of...
A Mechanism for Anonymous Credit Card Systems
NASA Astrophysics Data System (ADS)
Tamura, Shinsuke; Yanase, Tatsuro
This paper proposes a mechanism for anonymous credit card systems, in which each credit card holder can conceal individual transactions from the credit card company, while enabling the credit card company to calculate the total expenditures of transactions of individual card holders during specified periods, and to identify card holders who executed dishonest transactions. Based on three existing mechanisms, i.e. anonymous authentication, blind signature and secure statistical data gathering, together with implicit transaction links proposed here, the proposed mechanism enables development of anonymous credit card systems without assuming any absolutely trustworthy entity like tamper resistant devices or organizations faithful both to the credit card company and card holders.
Turning a Private Label Bank Card into a Multi-function Campus ID Card.
ERIC Educational Resources Information Center
James, Thomas G.; Norwood, Bill R.
1991-01-01
This article describes the development at Florida State University of the Seminole ACCESS card, which functions simultaneously as a bank automated teller machine card, a student identification card, and a debit card. Explained are the partnership between the university and the bank charge card center, funding system, technologies involved, and…
Zhou, P; Chou, J; Olea, R S; Yuan, J; Wagner, G
1999-09-28
Direct recruitment and activation of caspase-9 by Apaf-1 through the homophilic CARD/CARD (Caspase Recruitment Domain) interaction is critical for the activation of caspases downstream of mitochondrial damage in apoptosis. Here we report the solution structure of the Apaf-1 CARD domain and its surface of interaction with caspase-9 CARD. Apaf-1 CARD consists of six tightly packed amphipathic alpha-helices and is topologically similar to the RAIDD CARD, with the exception of a kink observed in the middle of the N-terminal helix. By using chemical shift perturbation data, the homophilic interaction was mapped to the acidic surface of Apaf-1 CARD centered around helices 2 and 3. Interestingly, a significant portion of the chemically perturbed residues are hydrophobic, indicating that in addition to the electrostatic interactions predicted previously, hydrophobic interaction is also an important driving force underlying the CARD/CARD interaction. On the basis of the identified functional residues of Apaf-1 CARD and the surface charge complementarity, we propose a model of CARD/CARD interaction between Apaf-1 and caspase-9.
Credit card debt, stress and key health risk behaviors among college students.
Nelson, Melissa C; Lust, Katherine; Story, Mary; Ehlinger, Ed
2008-01-01
To examine cross-sectional associations between credit card debt, stress, and health risk behaviors among college students, focusing particularly on weight-related behaviors. Random-sample, mailed survey. Undergraduate and graduate students (n = 3206) attending a large public university. Self-reported health indicators (e.g., weight, height, physical activity, diet, weight control, stress, credit card debt). More than 23% of students reported credit card debt > or = $1000. Using Poisson regression to predict relative risks (RR) of health behaviors, debt of at least $1000 was associated with nearly every risk indicator tested, including overweight/obesity, insufficient physical activity, excess television viewing, infrequent breakfast consumption, fast food consumption, unhealthy weight control, body dissatisfaction, binge drinking, substance use, and violence. For example, adjusted RR [ARR] ranged from 1.09 (95% Confidence interval [CI]: 1.02-1.17) for insufficient vigorous activity to 2.17 (CI: 0.68-2.82) for using drugs other than marijuana in the past 30 days. Poor stress management was also a robust indicator of health risk. University student lifestyles may be characterized by a variety of coexisting risk factors. These findings indicate that both debt and stress were associated with wide-ranging adverse health indicators. Intervention strategies targeting at-risk student populations need to be tailored to work within the context of the many challenges of college life, which may serve as barriers to healthy lifestyles. Increased health promotion efforts targeting stress, financial management, and weight-related health behaviors may be needed to enhance wellness among young adults.
NASA Astrophysics Data System (ADS)
Jin, Yu; Liu, Renrong; Zhu, Lixin; Chen, Zhenzhen
2017-11-01
In this paper, an immunochromatographic assay card was developed for the detection of DON in feed and cereals using a novel colloidal gold labeling method. For the colloidal gold immunochromatographic rapid detection (GICD) card, a monoclonal antibody DON-mAb and a goat anti-chicken IgY were drawn on NC membrane as the test line (T line) and the control line (C line) respectively. A gold labeled DON-CBSA conjugate and a gold labeled chicken IgY were sprayed onto the conjugate pad. The GICD card has cut-off levels of 50ng/mL for DON, which is invulnerable to matrix interference, and applicable to a wide range of samples. The GICD detecting results of feed and grain samples were compared with the results of ELISA testing, which showed good consistency.
Code of Federal Regulations, 2014 CFR
2014-07-01
... with the manufacturer's instructions. Interim controls means a set of measures designed to temporarily... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED... disposable cleaning cloths with the card, whether post-renovation cleaning has been properly completed...
Code of Federal Regulations, 2013 CFR
2013-07-01
... with the manufacturer's instructions. Interim controls means a set of measures designed to temporarily... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED... disposable cleaning cloths with the card, whether post-renovation cleaning has been properly completed...
Code of Federal Regulations, 2012 CFR
2012-07-01
... with the manufacturer's instructions. Interim controls means a set of measures designed to temporarily... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED... disposable cleaning cloths with the card, whether post-renovation cleaning has been properly completed...
Abdulaziz, Kasim; Brehaut, Jamie; Taljaard, Monica; Émond, Marcel; Sirois, Marie-Josée; Lee, Jacques S; Wilding, Laura; Perry, Jeffrey J
2015-01-01
Objectives Physicians are a commonly targeted group in health research surveys, but their response rates are often relatively low. The goal of this paper was to evaluate the effect of unconditional incentives in the form of a coffee card on physician postal survey response rates. Design Following 13 key informant interviews and eight cognitive interviews a survey questionnaire was developed. Participants A random sample of 534 physicians, stratified by physician group (geriatricians, family physicians, emergency physicians) was selected from a national medical directory. Setting Using computer generated random numbers; half of the physicians in each stratum were allocated to receive a coffee card to a popular national coffee chain together with the first survey mailout. Interventions The intervention was a $10 Tim Hortons gift card given to half of the physicians who were randomly allocated to receive the incentive. Results 265 (57.0%) physicians completed the survey. The response rate was significantly higher in the group allocated to receive the incentive (62.7% vs 51.3% in the control group; p=0.01). Conclusions Our results indicate that an unconditional incentive in the form of a coffee gift card can substantially improve physician response rates. Future research can look at the effect of varying amounts of cash on the gift cards on response rates. PMID:25694460
In vitro reconstitution of interactions in the CARD9 signalosome
Park, Jin Hee; Choi, Jae Young; Mustafa, Mir Faisal; Park, Hyun Ho
2017-01-01
The caspase-associated recruitment domain (CARD)-containing protein 9 (CARD9) signalosome is composed of CARD9, B-cell CLL/lymphoma 10 (BCL10) and mucosa-associated lymphoid tissue lymphoma translocation protein 1 (MALT1). The CARD9 signalosome has been reported to exert critical functions in the immunoreceptor tyrosine-based activation motif-coupled receptor-mediated activation of myeloid cells, through nuclear factor-κB pathways during innate immunity processes. During CARD9 signalosome assembly, BCL10 has been revealed to function as an adaptor protein and to interact with CARD9 via CARD-CARD interactions; BCL10 also interacts with MALT1 via its C-terminal Ser/Thr-rich region and the first immunoglobulin domain of MALT1. The CARD9 signalosome is implicated in critical biological processes; however, its structural and biochemical characteristics have yet to be elucidated. In the present study, CARD9 and BCL10 CARDs were successfully purified and characterized, and their biochemical properties were investigated. In addition, CARD9-BCL10 complexes were reconstituted in vitro under low salt and pH conditions. Furthermore, based on structural modeling data, a scheme was proposed to describe the interactions between CARD9 and BCL10. This provides a further understanding of the mechanism of how the CARD9 signalosome may be assembled. PMID:28765954
Is poker a game of skill or chance? A quasi-experimental study.
Meyer, Gerhard; von Meduna, Marc; Brosowski, Tim; Hayer, Tobias
2013-09-01
Due to intensive marketing and the rapid growth of online gambling, poker currently enjoys great popularity among large sections of the population. Although poker is legally a game of chance in most countries, some (particularly operators of private poker web sites) argue that it should be regarded as a game of skill or sport because the outcome of the game primarily depends on individual aptitude and skill. The available findings indicate that skill plays a meaningful role; however, serious methodological weaknesses and the absence of reliable information regarding the relative importance of chance and skill considerably limit the validity of extant research. Adopting a quasi-experimental approach, the present study examined the extent to which the influence of poker playing skill was more important than card distribution. Three average players and three experts sat down at a six-player table and played 60 computer-based hands of the poker variant "Texas Hold'em" for money. In each hand, one of the average players and one expert received (a) better-than-average cards (winner's box), (b) average cards (neutral box) and (c) worse-than-average cards (loser's box). The standardized manipulation of the card distribution controlled the factor of chance to determine differences in performance between the average and expert groups. Overall, 150 individuals participated in a "fixed-limit" game variant, and 150 individuals participated in a "no-limit" game variant. ANOVA results showed that experts did not outperform average players in terms of final cash balance. Rather, card distribution was the decisive factor for successful poker playing. However, expert players were better able to minimize losses when confronted with disadvantageous conditions (i.e., worse-than-average cards). No significant differences were observed between the game variants. Furthermore, supplementary analyses confirm differential game-related actions dependent on the card distribution, player status, and game variant. In conclusion, the study findings indicate that poker should be regarded as a game of chance, at least under certain basic conditions, and suggest new directions for further research.
Monitoring of atopic dermatitis using leaky coaxial cable.
Dong, Binbin; Ren, Aifeng; Shah, Syed Aziz; Hu, Fangming; Zhao, Nan; Yang, Xiaodong; Haider, Daniyal; Zhang, Zhiya; Zhao, Wei; Abbasi, Qammer Hussain
2017-12-01
In our daily life, inadvertent scratching may increase the severity of skin diseases (such as atopic dermatitis etc.). However, people rarely pay attention to this matter, so the known measurement behaviour of the movement is also very little. Nevertheless, the behaviour and frequency of scratching represent the degree of itching, and the analysis of scratching frequency is helpful to the doctor's clinical dosage. In this Letter, a novel system is proposed to monitor the scratching motion of a sleeping human body at night. The core device of the system is just a leaky coaxial cable (LCX) and a router. Commonly, LCX is used in the blind field or semi-blindfield in wireless communication. The new idea is that the leaky cable is placed on the bed, and then the state information of physical layer of wireless communication channels is acquired to identify the scratching motion and other small body movements in the human sleep process. The results show that it can be used to detect the movement and its duration. Channel state information (CSI) packet is collected by card installed in the computer based on the 802.11n protocol. The characterisation of the scratch motion in the collected CSI is unique, so it can be distinguished from the wireless channel amplitude variation trend.
Monitoring of atopic dermatitis using leaky coaxial cable
Dong, Binbin; Ren, Aifeng; Shah, Syed Aziz; Hu, Fangming; Zhao, Nan; Haider, Daniyal; Zhang, Zhiya; Zhao, Wei; Abbasi, Qammer Hussain
2017-01-01
In our daily life, inadvertent scratching may increase the severity of skin diseases (such as atopic dermatitis etc.). However, people rarely pay attention to this matter, so the known measurement behaviour of the movement is also very little. Nevertheless, the behaviour and frequency of scratching represent the degree of itching, and the analysis of scratching frequency is helpful to the doctor's clinical dosage. In this Letter, a novel system is proposed to monitor the scratching motion of a sleeping human body at night. The core device of the system is just a leaky coaxial cable (LCX) and a router. Commonly, LCX is used in the blind field or semi-blindfield in wireless communication. The new idea is that the leaky cable is placed on the bed, and then the state information of physical layer of wireless communication channels is acquired to identify the scratching motion and other small body movements in the human sleep process. The results show that it can be used to detect the movement and its duration. Channel state information (CSI) packet is collected by card installed in the computer based on the 802.11n protocol. The characterisation of the scratch motion in the collected CSI is unique, so it can be distinguished from the wireless channel amplitude variation trend. PMID:29383259
Real-time ground motions monitoring system developed by Raspberry Pi 3
NASA Astrophysics Data System (ADS)
Chen, P.; Jang, J. P.; Chang, H.; Lin, C. R.; Lin, P. P.; Wang, C. C.
2016-12-01
Ground-motions seismic stations are usually installed in the special geological area, like high possibility landslide area, active volcanoes, or nearby faults, to real-time monitor the possible geo-hazards. Base on the demands, three main issues needs to be considered: size, low-power consumption and real-time data transmission. Raspberry Pi 3 has the suitable characteristics to fit our requests. Thus, we develop a real-time ground motions monitoring system by Raspberry Pi 3. The Raspberry Pi has the credit-card-sized with single-board computers. The operating system is based on the programmable Linux system.The volume is only 85.6 by 53.98 by 17 mm with USB and Ethernet interfaces. The power supply is only needed 5 Volts and 2.1 A. It is easy to get power by using solar power and transmit the real-time data through Ethernet or by the mobile signal through USB adapter. As Raspberry Pi still a kind of small computer, the service, software or GUI can be very flexibly developed, such as the basic web server, ftp server, SSH connection, and real-time visualization interface tool etc. Until now, we have developed ten instruments with on-line/ real-time data transmission and have installed in the Taiping Mountain in Taiwan to motor the geohazard like mudslide.
Imaging standards for smart cards
NASA Astrophysics Data System (ADS)
Ellson, Richard N.; Ray, Lawrence A.
1996-02-01
"Smart cards" are plastic cards the size of credit cards which contain integrated circuits for the storage of digital information. The applications of these cards for image storage has been growing as card data capacities have moved from tens of bytes to thousands of bytes. This has prompted the recommendation of standards by the X3B10 committee of ANSI for inclusion in ISO standards for card image storage of a variety of image data types including digitized signatures and color portrait images. This paper will review imaging requirements of the smart card industry, challenges of image storage for small memory devices, card image communications, and the present status of standards. The paper will conclude with recommendations for the evolution of smart card image standards towards image formats customized to the image content and more optimized for smart card memory constraints.
Imaging standards for smart cards
NASA Astrophysics Data System (ADS)
Ellson, Richard N.; Ray, Lawrence A.
1996-01-01
'Smart cards' are plastic cards the size of credit cards which contain integrated circuits for the storage of digital information. The applications of these cards for image storage has been growing as card data capacities have moved from tens of bytes to thousands of bytes. This has prompted the recommendation of standards by the X3B10 committee of ANSI for inclusion in ISO standards for card image storage of a variety of image data types including digitized signatures and color portrait images. This paper reviews imaging requirements of the smart card industry, challenges of image storage for small memory devices, card image communications, and the present status of standards. The paper concludes with recommendations for the evolution of smart card image standards towards image formats customized to the image content and more optimized for smart card memory constraints.
NASA Astrophysics Data System (ADS)
Peter, Daniel; Videau, Brice; Pouget, Kevin; Komatitsch, Dimitri
2015-04-01
Improving the resolution of tomographic images is crucial to answer important questions on the nature of Earth's subsurface structure and internal processes. Seismic tomography is the most prominent approach where seismic signals from ground-motion records are used to infer physical properties of internal structures such as compressional- and shear-wave speeds, anisotropy and attenuation. Recent advances in regional- and global-scale seismic inversions move towards full-waveform inversions which require accurate simulations of seismic wave propagation in complex 3D media, providing access to the full 3D seismic wavefields. However, these numerical simulations are computationally very expensive and need high-performance computing (HPC) facilities for further improving the current state of knowledge. During recent years, many-core architectures such as graphics processing units (GPUs) have been added to available large HPC systems. Such GPU-accelerated computing together with advances in multi-core central processing units (CPUs) can greatly accelerate scientific applications. There are mainly two possible choices of language support for GPU cards, the CUDA programming environment and OpenCL language standard. CUDA software development targets NVIDIA graphic cards while OpenCL was adopted mainly by AMD graphic cards. In order to employ such hardware accelerators for seismic wave propagation simulations, we incorporated a code generation tool BOAST into an existing spectral-element code package SPECFEM3D_GLOBE. This allows us to use meta-programming of computational kernels and generate optimized source code for both CUDA and OpenCL languages, running simulations on either CUDA or OpenCL hardware accelerators. We show here applications of forward and adjoint seismic wave propagation on CUDA/OpenCL GPUs, validating results and comparing performances for different simulations and hardware usages.
NASA Technical Reports Server (NTRS)
Jorgensen, James H.; Skweres, Joyce A.; Mishra S. K.; McElmeel, M. Letticia; Maher, Louise A.; Mulder, Ross; Lancaster, Michael V.; Pierson, Duane L.
1997-01-01
Very little is known regarding the affects of the microgravity environment of space flight upon the action of antimicrobial agents on bacterial pathogens. This study was undertaken to develop a simple method for conducting antibacterial susceptibility tests during a Space Shuttle mission. Specially prepared susceptibility test research cards (bioMerieux Vitek, Hazelwood, MO) were designed to include 6-11 serial two-fold dilutions of 14 antimicrobial agents, including penicillins, cephalosporins, a Beta-lactamase inhibitor, vancomycin, erythromycin, tetracycline, gentamicin, ciprofloxacin, and trimethoprim/sulfamethoxazole. Minimal inhibitory concentrations (MICS) of the drugs were determined by visual reading of color endpoints in the Vitek research cards made possible by incorporation of a colorimetric growth indicator (alamarBlue(Trademark), Accumed International, Westlake, OH). This study has demonstrated reproducible susceptibility results when testing isolates of Staphylococcus aurezis, Group A Streptococcus, Enterococcusfaecalis, Escherichia coli (beta-lactamase positive and negative strains), Klebsiella pneumoniae, Enterobacter cloacae, and Pseudomoiias aeruginosa. In some instances, the MICs were comparable to those determined using a standard broth microdilution method, while in some cases the unique test media and format yielded slightly different values, that were themselves reproducible. The proposed in-flight experiment will include inoculation of the Vitek cards on the ground prior to launch of the Space Shuttle, storage of inoculated cards at refrigeration temperature aboard the Space Shuttle until experiment initiation, then incubation of the cards for 18-48 h prior to visual interpretation of MICs by the mission's astronauts. Ground-based studies have shown reproducible MICs following storage of inoculated cards for 7 days at 4-8 C to accommodate the mission's time schedule and the astronauts' activities. For comparison, ground-based control (normal gravity) MIC values will be generated by simultaneous inoculation and incubation of a second set of test cards in a laboratory at the launch site. This procedure can provide a safe and compact experiment that should yield new information on the affects of microgravity on the biological activities of various classes of antibiotics.
Macdonald, S A; Wells, S L; Giesbrecht, N; West, P M
1999-05-01
In 1994, regulatory changes were introduced in Ontario, Canada, permitting the purchase of alcoholic beverages with credit cards at government-operated liquor stores. Two objectives of this study were: (1) to compare the characteristics of credit card shoppers with non credit card shoppers at liquor stores, and (2) to assess whether changes occurred in alcohol consumption patterns among shoppers following the introduction of credit cards. Random digit dialing was used to interview 2,039 telephone participants prior to the introduction of credit cards (Time 1); 1,401 of these subjects were contacted 1 year later (Time 2). Independent sample t tests were used to compare credit card shoppers with shoppers not using credit cards, and paired t tests were performed to assess whether drinking behaviors changed from Time 1 to Time 2. The credit card shoppers were more likely than the non credit card shoppers to be highly educated (p < .001) and to have high incomes (p < .05). Credit card shoppers drank an average of 6.3 drinks over the previous week compared with 4.0 drinks among non credit card shoppers (p < .01). Although the overall amount of alcohol consumed among credit card shoppers dropped from 6.7 drinks at Time 1 to 6.3 at Time 2 (NS), credit card shoppers reported drinking significantly more often after credit cards were introduced (p < .05). The results suggest that credit cards may not present public health problems since significant increases in alcohol consumption among credit card shoppers were not found.
36 CFR 1254.84 - How may I use a debit card for copiers in the Washington, DC, area?
Code of Federal Regulations, 2010 CFR
2010-07-01
..., money order, debit card, or credit card. Your researcher identification card number as encoded on the... 1253 of this chapter, you may use cash or credit card to purchase a debit card from the vending... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false How may I use a debit card...
78 FR 42406 - Airworthiness Directives; Eurocopter France Helicopters
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-16
... 3 of the Rotorcraft Flight Manual. Many of the non-compliant servo-controls were installed by the... Emergency AD, we have discovered that the servo-control's component history card or equivalent record may... servo-controls with a non-compliant input lever bearing be replaced and returned to the manufacturer. AD...
ERIC Educational Resources Information Center
Kennedy, Mike
2002-01-01
Describes how growing acceptance of security measures such as access-control cards, video surveillance, and biometric devices is allowing colleges to protect students and their belongings more effectively. (EV)
Dynamic Virtual Credit Card Numbers
NASA Astrophysics Data System (ADS)
Molloy, Ian; Li, Jiangtao; Li, Ninghui
Theft of stored credit card information is an increasing threat to e-commerce. We propose a dynamic virtual credit card number scheme that reduces the damage caused by stolen credit card numbers. A user can use an existing credit card account to generate multiple virtual credit card numbers that are either usable for a single transaction or are tied with a particular merchant. We call the scheme dynamic because the virtual credit card numbers can be generated without online contact with the credit card issuers. These numbers can be processed without changing any of the infrastructure currently in place; the only changes will be at the end points, namely, the card users and the card issuers. We analyze the security requirements for dynamic virtual credit card numbers, discuss the design space, propose a scheme using HMAC, and prove its security under the assumption the underlying function is a PRF.
Arjunaraja, Swadhinya; Angelus, Pamela; Su, Helen C; Snow, Andrew L
2018-01-01
B -cell e xpansion with N F-κB and T -cell a nergy (BENTA) disease is a B-cell-specific lymphoproliferative disorder caused by germline gain-of-function mutations in CARD11 . These mutations force the CARD11 scaffold into an open conformation capable of stimulating constitutive NF-κB activation in lymphocytes, without requiring antigen receptor engagement. Many BENTA patients also suffer from recurrent infections, with 7 out of 16 patients exhibiting chronic, low-grade Epstein-Barr virus (EBV) viremia. In this mini-review, we discuss EBV infection in the pathogenesis and clinical management of BENTA disease, and speculate on mechanisms that could explain inadequate control of viral infection in BENTA patients.
Accelerator infrastructure in Europe: EuCARD 2011
NASA Astrophysics Data System (ADS)
Romaniuk, Ryszard S.
2011-10-01
The paper presents a digest of the research results in the domain of accelerator science and technology in Europe, shown during the annual meeting of the EuCARD - European Coordination of Accelerator Research and Development. The conference concerns building of the research infrastructure, including in this advanced photonic and electronic systems for servicing large high energy physics experiments. There are debated a few basic groups of such systems like: measurement - control networks of large geometrical extent, multichannel systems for large amounts of metrological data acquisition, precision photonic networks of reference time, frequency and phase distribution.
Trial of a "credit card" asthma self-management plan in a high-risk group of patients with asthma.
D'Souza, W; Burgess, C; Ayson, M; Crane, J; Pearce, N; Beasley, R
1996-05-01
The "credit card" asthma self-management plan provides the adult asthmatic patient with simple guidelines for the self-management of asthma, which are based on the self-assessment of peak expiratory flow rate recordings and symptoms. The study was a trial of the clinical efficacy of the credit card plan in a high-risk group of asthmatic patients. In this "before-and-after" trial, patients discharged from the emergency department of Wellington Hospital, after treatment for severe asthma were invited to attend a series of hospital outpatient clinics at which the credit card plan was introduced. Questionnaires were used to compare markers of asthma morbidity, requirement for emergency medical care, and medication use during the 6-month period before and after intervention with the credit card plan. Of the 30 patients with asthma who attended the first outpatient clinic, 26 (17 women and 9 men) completed the program. In these 26 participants, there was a reduction in both morbidity and requirement for acute medical services: specifically, the proportion waking with asthma more than once a week decreased from 65% to 23% (p = 0.005) and the proportion visiting the emergency department for treatment of severe asthma decreased from 58% to 15% (p = 0.004). The patients attending the clinics commented favorably on the plan, in particular on its usefulness as an educational tool for monitoring and treating their asthma. Although the interpretation of this study is limited by the lack of a randomized control group, the findings are consistent with other evidence that the credit card asthma self-management plan can be an effective and acceptable system for improving asthma care in a high-risk group of adult patients with asthma.
Sepehri, Ardeshir
2014-03-01
Much of the existing literature on the financial protection of health insurance focuses on the impact of insurance status on total out-of-pocket expenditure on all sorts of care sought, regardless of whether the insured patients use their health insurance cards. Using Vietnam's 2006 Household Living Standard Survey data and an appropriate multivariate regression model, this article assesses the influence of Vietnam's three health insurance schemes on out-of-pocket expenditures with and without controlling for the actual use of the health insurance card when seeking outpatient care. Vietnam's experience suggests that insurance provides some financial protection, provided that insurance benefits are actually accessed. Compared with private fee-paying patients, the use of the insurance card reduces out-of-pocket expenditures, on average, by as much as 50-56%. In contrast, failure to control for the use of the health insurance card reduces the financial protection of insurance to 26-37%. However, the financial protection benefits afforded by Vietnam's insurance schemes are distributed rather inequitably. Insurance reduces out-of-pocket expenditures by as much as 71-75% for contacts at the major state hospitals, as compared with 26-38% for contacts at the community health centres. The overall financial protection provided by insurance is also found to be larger for the higher-income individuals than the middle- and low-income individuals. Efforts to ensure that all enrollees receive equitable and good-quality health services according to the benefits package appear warranted. Improving the quality of care provided by the community health centres-the main access point for medical care for many enrollees with health insurance for the poor coverage-and a more effective referral system may also be a cost-effective way of channelling outpatient service contact to the lower-level health facilities, away from the overcrowded higher-level health facilities.
The Lick-Gaertner automatic measuring system
NASA Technical Reports Server (NTRS)
Vasilevskis, S.; Popov, W. A.
1971-01-01
The Lick-Gaertner automatic equipment has been designed mainly for the measurement of stellar proper motions with reference to galaxies, and consists of two main components: the survey machine and the automatic measuring engine. The survey machine is used for initial inspection and selection of objects for subsequent measurement. Two plates, up to 17 x 17 inches each, are surveyed simultaneously by means of projection on a screen. The approximate positions of objects selected are measured by two optical screws: helical lines cut through an aluminum coating on glass cylinders. These approximate coordinates to a precision of the order of 0.03mm are transmitted to a card punch by encoders connected with the cylinders.
NASA Technical Reports Server (NTRS)
Bailey, Melvin L. (Editor)
2000-01-01
This is a compilation of pilot comments from the Boeing High Speed Research Aircraft, Cycle 3, simulation study (LaRC.3) of the effects of aeroservoelasticity, conducted from October to December 1997 at NASA Langley Research Center. This simulation study was conducted using the Visual Motion Simulator. The comments are from direct tape transcriptions and have been edited for spelling only. These comments were made on tape following the completion of each flight card, immediately after the pilot was satisfied with his practice and data recording runs. Six pilots were used in the evaluation and they are identified as pilots A through F.
Aubertine, C. L.; Rivera, M.; Rohan, S. M.; Larone, D. H.
2006-01-01
The new VITEK 2 colorimetric card was compared to the previous fluorometric card for identification of yeast. API 20C was considered the “gold standard.” The new card consistently performed better than the older card. Isolates from CHROMagar Candida plates were identified equally as well as those from Sabouraud dextrose agar. PMID:16390976
A microprocessor card software server to support the Quebec health microprocessor card project.
Durant, P; Bérubé, J; Lavoie, G; Gamache, A; Ardouin, P; Papillon, M J; Fortin, J P
1995-01-01
The Quebec Health Smart Card Project is advocating the use of a memory card software server[1] (SCAM) to implement a portable medical record (PMR) on a smart card. The PMR is viewed as an object that can be manipulated by SCAM's services. In fact, we can talk about a pseudo-object-oriented approach. This software architecture provides a flexible and evolutive way to manage and optimize the PMR. SCAM is a generic software server; it can manage smart cards as well as optical (laser) cards or other types of memory cards. But, in the specific case of the Quebec Health Card Project, SCAM is used to provide services between physicians' or pharmacists' software and IBM smart card technology. We propose to expose the concepts and techniques used to provide a generic environment to deal with smart cards (and more generally with memory cards), to obtain a dynamic an evolutive PMR, to raise the system global security level and the data integrity, to optimize significantly the management of the PMR, and to provide statistic information about the use of the PMR.
FORTRAN programs for calculating nonlinear seismic ground response in two dimensions
Joyner, W.B.
1978-01-01
The programs described here were designed for calculating the nonlinear seismic response of a two-dimensional configuration of soil underlain by a semi-infinite elastic medium representing bedrock. There are two programs. One is for plane strain motions, that is, motions in the plane perpendicular to the long axis of the structure, and the other is for antiplane strain motions, that is motions parallel to the axis. The seismic input is provided by specifying what the motion of the rock-soil boundary would be if the soil were absent and the boundary were a free surface. This may be done by supplying a magnetic tape containing the values of particle velocity for every boundary point at every instant of time. Alternatively, a punch card deck may be supplied giving acceleration values at every instant of time. In the plane strain program it is assumed that the acceleration values apply simultaneously to every point on the boundary; in the antiplane strain program it is assumed that the acceleration values characterize a plane shear wave propagating upward in the underlying elastic medium at a specified angle with the vertical. The nonlinear hysteretic behavior of the soil is represented by a three-dimensional rheological model. A boundary condition is used which takes account of finite rigidity in the elastic substratum. The computations are performed by an explicit finite-difference scheme that proceeds step by step in space and time. Computations are done in terms of stress departures from an unspecified initial state. Source listings are provided here along with instructions for preparing the input. A more detailed discussion of the method is presented elsewhere.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Avramova, Maria; Toptan, Aysenur; Porter, Nathan
This document describes how to make a CTF input deck. A CTF input deck is organized into Card Groups and Cards. A Card Group is a collection of Cards. A Card is de ned as a line of input. Each Card may contain multiple data. A Card is terminated by making a new line. This document has been organized so that each Card Group is discussed in its own dedicated chapter. Each card is discused in its own dedicated section. Each data in the card is discussed in its own block. The block gives information about the data, including themore » number of the input, the title, a description of the meaning of the data, units, data type, and so on. An example block is shown below to discuss the meaning of each entry in the block.« less
Code of Federal Regulations, 2010 CFR
2010-07-01
... with none of the air leaking past it. Interim controls means a set of measures designed to temporarily... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED... disposable cleaning cloths with the card, whether post-renovation cleaning has been properly completed...
Code of Federal Regulations, 2011 CFR
2011-07-01
... with none of the air leaking past it. Interim controls means a set of measures designed to temporarily... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED... disposable cleaning cloths with the card, whether post-renovation cleaning has been properly completed...
The NASTRAN User's Manual Level 16.0 and Supplement
NASA Technical Reports Server (NTRS)
1976-01-01
The user's manual is restricted to those items related to the use of NASTRAN that are independent of the computing system being used. The features of NASTRAN described include: (1) procedures for defining and loading a structural model and a functional reference for every card that is used for structural modeling; (2) the NASTRAN data deck, including the details for each of the data cards; (3) the NASTRAN control cards that are associated with the use of the program; (4) rigid format procedures, along with specific instructions for the use of each rigid format: (5) procedures for using instructions for the use of each rigid format; (5) procedures for using the NASTRAN plotting capability; (6) procedures governing the creation of DMAP programs; and (7) the NASTRAN diagnostic messages. The NASTRAN dictionary of mnemonics, acronyms, phrases, and other commonly used NASTRAN terms is included along with a limited number of sample problems.
Hypermedia or Hyperchaos: Using HyperCard to Teach Medical Decision Making
Smith, W.R.; Hahn, J.S.
1989-01-01
HyperCard presents an uncoventional instructional environment for educators and students, in that it is nonlinear, nonsequential, and it provides innumerable choices of learning paths to learners. The danger of this environment is that it may frustrate learners whose cognitive and learning styles do not match this environment. Leaners who prefer guided learning rather than independent exploration may become distracted or disoriented by this environment, lost in “hyperspace.” In the context of medical education, these ill-matched styles may produce some physicians who have not mastered skills essential to the practice of medicine. The authors have sought to develop a HyperCard learning environment consisting of related programs that teach medical decision making. The environment allows total learner control until the learner demonstrates a need for guidance in order to achieve the essential objectives of the program. A discussion follows of the implications of hypermedia for instructional design and medical education.
A Timing Synchronizer System for Beam Test Setups Requiring Galvanic Isolation
NASA Astrophysics Data System (ADS)
Meder, Lukas Dominik; Emschermann, David; Frühauf, Jochen; Müller, Walter F. J.; Becker, Jürgen
2017-07-01
In beam test setups detector elements together with a readout composed of frontend electronics (FEE) and usually a layer of field-programmable gate arrays (FPGAs) are being analyzed. The FEE is in this scenario often directly connected to both the detector and the FPGA layer what in many cases requires sharing the ground potentials of these layers. This setup can become problematic if parts of the detector need to be operated at different high-voltage potentials, since all of the FPGA boards need to receive a common clock and timing reference for getting the readout synchronized. Thus, for the context of the compressed baryonic matter experiment a versatile timing synchronizer (TS) system was designed providing galvanically isolated timing distribution links over twisted-pair cables. As an electrical interface the so-called timing data processing board FPGA mezzanine card was created for being mounted onto FPGA-based advanced mezzanine cards for mTCA.4 crates. The FPGA logic of the TS system connects to this card and can be monitored and controlled through IPBus slow-control links. Evaluations show that the system is capable of stably synchronizing the FPGA boards of a beam test setup being integrated into a hierarchical TS network.
Sparks, Rachel; Salskov, Alex H; Chang, Anita S; Wentworth, Kelly L; Gupta, Pritha P; Staiger, Thomas O; Anawalt, Bradley D
2015-01-01
Complete documentation of patient comorbidities in the medical record is important for clinical care, hospital reimbursement, and quality performance measures. We designed a pocket card reminder and brief educational intervention aimed at hospitalists with the goal of improving documentation of 6 common comorbidities present on admission: coagulation abnormalities, metastatic cancer, anemia, fluid and electrolyte abnormalities, malnutrition, and obesity. Two internal medicine inpatient teams led by 10 hospitalist physicians at an academic medical center received the educational intervention and pocket card reminder (n = 520 admissions). Two internal medicine teams led by nonhospitalist physicians served as a control group (n = 590 admissions). Levels of documentation of 6 common comorbidities, expected length of stay, and expected mortality were measured at baseline and during the 9-month study period. The intervention was associated with increased documentation of anemia, fluid and electrolyte abnormalities, malnutrition, and obesity in the intervention group, both compared to baseline and compared to the control group during the study period. The expected length of stay increased in the intervention group during the study period. A simple educational intervention and pocket card reminder were associated with improved documentation and hospital quality measures at an academic medical center.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Colbert, C.; Moles, D.R.
This paper reports that the authors developed for the Air Force the Mark VI Personal Identity Verifier (PIV) for controlling access to a fixed or mobile ICBM site, a computer terminal, or mainframe. The Mark VI records the digitized silhouettes of four fingers of each hand on an AT and T smart card. Like fingerprints, finger shapes, lengths, and widths constitute an unguessable biometric password. A Security Officer enrolls an authorized person who places each hand, in turn, on a backlighted panel. An overhead scanning camera records the right and left hand reference templates on the smart card. The Securitymore » Officer adds to the card: name, personal identification number (PIN), and access restrictions such as permitted days of the week, times of day, and doors. To gain access, cardowner inserts card into a reader slot and places either hand on the panel. Resulting access template is matched to the reference template by three sameness algorithms. The final match score is an average of 12 scores (each of the four fingers, matched for shape, length, and width), expressing the degree of sameness. (A perfect match would score 100.00.) The final match score is compared to a predetermined score (threshold), generating an accept or reject decision.« less
Patients' Awareness, Usage and Impact of Hospital Report Cards in the US.
Emmert, Martin; Schlesinger, Mark
2017-12-01
Little knowledge is available about the importance of hospital report cards in the US from the patients' perspective. It also remains unknown whether specific report cards with a stronger emphasis on clinical measures have a greater impact on hospital choice than general report cards that focus on online-derived ratings. The aim of this study was to determine the awareness and usage of hospital report cards as well as their impact on hospital choice in the US. We conducted a cross-sectional study by surveying a stratified online sample (N = 1332) to ensure representativeness to the US online population (February 2015). Overall, 75% of all respondents (mean age 45.4 years; 54% female) were aware of hospital report cards. Among these, 56% had used a report card to search for a hospital, and 80% of report card users stated having been influenced by a report card. Both the awareness and usage of general report cards were shown to be higher than for specific report cards. No significant differences could be detected regarding the impact between general or specific report cards on hospital choice. Our results indicate that hospital report cards play a considerable role among patients when searching for a hospital in the US; however, patients do not seem to have a preference regarding the type of report cards they use when selecting a hospital.
NASA Astrophysics Data System (ADS)
Keshet, Aviv; Ketterle, Wolfgang
2013-01-01
Atomic physics experiments often require a complex sequence of precisely timed computer controlled events. This paper describes a distributed graphical user interface-based control system designed with such experiments in mind, which makes use of off-the-shelf output hardware from National Instruments. The software makes use of a client-server separation between a user interface for sequence design and a set of output hardware servers. Output hardware servers are designed to use standard National Instruments output cards, but the client-server nature should allow this to be extended to other output hardware. Output sequences running on multiple servers and output cards can be synchronized using a shared clock. By using a field programmable gate array-generated variable frequency clock, redundant buffers can be dramatically shortened, and a time resolution of 100 ns achieved over effectively arbitrary sequence lengths.
Keshet, Aviv; Ketterle, Wolfgang
2013-01-01
Atomic physics experiments often require a complex sequence of precisely timed computer controlled events. This paper describes a distributed graphical user interface-based control system designed with such experiments in mind, which makes use of off-the-shelf output hardware from National Instruments. The software makes use of a client-server separation between a user interface for sequence design and a set of output hardware servers. Output hardware servers are designed to use standard National Instruments output cards, but the client-server nature should allow this to be extended to other output hardware. Output sequences running on multiple servers and output cards can be synchronized using a shared clock. By using a field programmable gate array-generated variable frequency clock, redundant buffers can be dramatically shortened, and a time resolution of 100 ns achieved over effectively arbitrary sequence lengths.
Internet Delivered Support for Tobacco Control in Dental Practice: Randomized Controlled Trial
Richman, Joshua S; Ray, Midge N; Allison, Jeroan J; Gilbert, Gregg H; Shewchuk, Richard M; Kohler, Connie L; Kiefe, Catarina I
2008-01-01
Background The dental visit is a unique opportunity for tobacco control. Despite evidence of effectiveness in dental settings, brief provider-delivered cessation advice is underutilized. Objective To evaluate an Internet-delivered intervention designed to increase implementation of brief provider advice for tobacco cessation in dental practice settings. Methods Dental practices (N = 190) were randomized to the intervention website or wait-list control. Pre-intervention and after 8 months of follow-up, each practice distributed exit cards (brief patient surveys assessing provider performance, completed immediately after the dental visit) to 100 patients. Based on these exit cards, we assessed: whether patients were asked about tobacco use (ASK) and, among tobacco users, whether they were advised to quit tobacco (ADVISE). All intervention practices with follow-up exit card data were analyzed as randomized regardless of whether they participated in the Internet-delivered intervention. Results Of the 190 practices randomized, 143 (75%) dental practices provided follow-up data. Intervention practices’ mean performance improved post-intervention by 4% on ASK (29% baseline, adjusted odds ratio = 1.29 [95% CI 1.17-1.42]), and by 11% on ADVISE (44% baseline, OR = 1.55 [95% CI 1.28-1.87]). Control practices improved by 3% on ASK (Adj. OR 1.18 [95% CI 1.07-1.29]) and did not significantly improve in ADVISE. A significant group-by-time interaction effect indicated that intervention practices improved more over the study period than control practices for ADVISE (P = 0.042) but not for ASK. Conclusion This low-intensity, easily disseminated intervention was successful in improving provider performance on advice to quit. Trial Registration clinicaltrials.gov NCT00627185; http://clinicaltrials.gov/ct2/show/NCT00627185 (Archived by WebCite at http://www.webcitation.org/5c5Kugvzj) PMID:18984559
Saieg, Mauro Ajaj; Geddie, William R; Boerner, Scott L; Liu, Ni; Tsao, Ming; Zhang, Tong; Kamel-Reid, Suzanne; da Cunha Santos, Gilda
2012-06-25
Novel high-throughput molecular technologies have made the collection and storage of cells and small tissue specimens a critical issue. The FTA card provides an alternative to cryopreservation for biobanking fresh unfixed cells. The current study compared the quality and integrity of the DNA obtained from 2 types of FTA cards (Classic and Elute) using 2 different extraction protocols ("Classic" and "Elute") and assessed the feasibility of performing multiplex mutational screening using fine-needle aspiration (FNA) biopsy samples. Residual material from 42 FNA biopsies was collected in the cards (21 Classic and 21 Elute cards). DNA was extracted using the Classic protocol for Classic cards and both protocols for Elute cards. Polymerase chain reaction for p53 (1.5 kilobase) and CARD11 (500 base pair) was performed to assess DNA integrity. Successful p53 amplification was achieved in 95.2% of the samples from the Classic cards and in 80.9% of the samples from the Elute cards using the Classic protocol and 28.5% using the Elute protocol (P = .001). All samples (both cards) could be amplified for CARD11. There was no significant difference in the DNA concentration or 260/280 purity ratio when the 2 types of cards were compared. Five samples were also successfully analyzed by multiplex MassARRAY spectrometry, with a mutation in KRAS found in 1 case. High molecular weight DNA was extracted from the cards in sufficient amounts and quality to perform high-throughput multiplex mutation assays. The results of the current study also suggest that FTA Classic cards preserve better DNA integrity for molecular applications compared with the FTA Elute cards. Copyright © 2012 American Cancer Society.
Maurer, Kathryn; Luo, Hongxue; Shen, Zhiyong; Wang, Guixiang; Du, Hui; Wang, Chun; Liu, Xiaobo; Wang, Xiamen; Qu, Xinfeng; Wu, Ruifang; Belinson, Jerome
2016-03-01
Solid media transport can be used to design adaptable cervical cancer screening programs but currently is limited by one card with published data. To develop and evaluate a solid media transport card for use in high-risk human papillomavirus detection (HR-HPV). The Preventative Oncology International (POI) card was constructed using PK 226 paper(®) treated with cell-lysing solution and indicating dye. Vaginal samples were applied to the POI card and the indicating FTA (iFTA) elute card. A cervical sample was placed in liquid media. All specimens were tested for HR-HPV. Color change was assessed at sample application and at card processing. Stability of the POI card and iFTA elute card was tested at humidity. 319 women were enrolled. Twelve women had at least one insufficient sample with no difference between media (p=0.36). Compared to liquid samples, there was good agreement for HR-HPV detection with kappa of 0.81 (95% CI 0.74-0.88) and 0.71 (95% CI 0.62-0.79) for the POI and iFTA elute card respectively. Sensitivity for ≥CIN2 was 100% (CI 100-100%), 95.1% (CI 92.7-97.6%), and 93.5% (CI 90.7-96.3%) for the HR-HPV test from the liquid media, POI card, and iFTA elute card respectively. There was no color change of the POI card noted in humidity but the iFTA elute card changed color at 90% humidity. The POI card is suitable for DNA transport and HR-HPV testing. This card has the potential to make cervical cancer screening programs more affordable worldwide. Copyright © 2015 Elsevier B.V. All rights reserved.
Validation results of specifications for motion control interoperability
NASA Astrophysics Data System (ADS)
Szabo, Sandor; Proctor, Frederick M.
1997-01-01
The National Institute of Standards and Technology (NIST) is participating in the Department of Energy Technologies Enabling Agile Manufacturing (TEAM) program to establish interface standards for machine tool, robot, and coordinate measuring machine controllers. At NIST, the focus is to validate potential application programming interfaces (APIs) that make it possible to exchange machine controller components with a minimal impact on the rest of the system. This validation is taking place in the enhanced machine controller (EMC) consortium and is in cooperation with users and vendors of motion control equipment. An area of interest is motion control, including closed-loop control of individual axes and coordinated path planning. Initial tests of the motion control APIs are complete. The APIs were implemented on two commercial motion control boards that run on two different machine tools. The results for a baseline set of APIs look promising, but several issues were raised. These include resolving differing approaches in how motions are programmed and defining a standard measurement of performance for motion control. This paper starts with a summary of the process used in developing a set of specifications for motion control interoperability. Next, the EMC architecture and its classification of motion control APIs into two classes, Servo Control and Trajectory Planning, are reviewed. Selected APIs are presented to explain the basic functionality and some of the major issues involved in porting the APIs to other motion controllers. The paper concludes with a summary of the main issues and ways to continue the standards process.
3D tumor localization through real-time volumetric x-ray imaging for lung cancer radiotherapy.
Li, Ruijiang; Lewis, John H; Jia, Xun; Gu, Xuejun; Folkerts, Michael; Men, Chunhua; Song, William Y; Jiang, Steve B
2011-05-01
To evaluate an algorithm for real-time 3D tumor localization from a single x-ray projection image for lung cancer radiotherapy. Recently, we have developed an algorithm for reconstructing volumetric images and extracting 3D tumor motion information from a single x-ray projection [Li et al., Med. Phys. 37, 2822-2826 (2010)]. We have demonstrated its feasibility using a digital respiratory phantom with regular breathing patterns. In this work, we present a detailed description and a comprehensive evaluation of the improved algorithm. The algorithm was improved by incorporating respiratory motion prediction. The accuracy and efficiency of using this algorithm for 3D tumor localization were then evaluated on (1) a digital respiratory phantom, (2) a physical respiratory phantom, and (3) five lung cancer patients. These evaluation cases include both regular and irregular breathing patterns that are different from the training dataset. For the digital respiratory phantom with regular and irregular breathing, the average 3D tumor localization error is less than 1 mm which does not seem to be affected by amplitude change, period change, or baseline shift. On an NVIDIA Tesla C1060 graphic processing unit (GPU) card, the average computation time for 3D tumor localization from each projection ranges between 0.19 and 0.26 s, for both regular and irregular breathing, which is about a 10% improvement over previously reported results. For the physical respiratory phantom, an average tumor localization error below 1 mm was achieved with an average computation time of 0.13 and 0.16 s on the same graphic processing unit (GPU) card, for regular and irregular breathing, respectively. For the five lung cancer patients, the average tumor localization error is below 2 mm in both the axial and tangential directions. The average computation time on the same GPU card ranges between 0.26 and 0.34 s. Through a comprehensive evaluation of our algorithm, we have established its accuracy in 3D tumor localization to be on the order of 1 mm on average and 2 mm at 95 percentile for both digital and physical phantoms, and within 2 mm on average and 4 mm at 95 percentile for lung cancer patients. The results also indicate that the accuracy is not affected by the breathing pattern, be it regular or irregular. High computational efficiency can be achieved on GPU, requiring 0.1-0.3 s for each x-ray projection.
8 CFR 299.5 - Display of control numbers.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 8 Aliens and Nationality 1 2011-01-01 2011-01-01 false Display of control numbers. 299.5 Section 299.5 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS IMMIGRATION FORMS... OMB Control No. AR-11 Alien's Change of Address Card 1115-0003 G-79A Data Relating to Beneficiary of...
Iridovirus CARD Protein Inhibits Apoptosis through Intrinsic and Extrinsic Pathways
Chen, Chien-Wen; Wu, Ming-Shan; Huang, Yi-Jen; Lin, Pei-Wen; Shih, Chueh-Ju; Lin, Fu-Pang; Chang, Chi-Yao
2015-01-01
Grouper iridovirus (GIV) belongs to the genus Ranavirus of the family Iridoviridae; the genomes of such viruses contain an anti-apoptotic caspase recruitment domain (CARD) gene. The GIV-CARD gene encodes a protein of 91 amino acids with a molecular mass of 10,505 Daltons, and shows high similarity to other viral CARD genes and human ICEBERG. In this study, we used Northern blot to demonstrate that GIV-CARD transcription begins at 4 h post-infection; furthermore, we report that its transcription is completely inhibited by cycloheximide but not by aphidicolin, indicating that GIV-CARD is an early gene. GIV-CARD-EGFP and GIV-CARD-FLAG recombinant proteins were observed to translocate from the cytoplasm into the nucleus, but no obvious nuclear localization sequence was observed within GIV-CARD. RNA interference-mediated knockdown of GIV-CARD in GK cells infected with GIV inhibited expression of GIV-CARD and five other viral genes during the early stages of infection, and also reduced GIV infection ability. Immunostaining was performed to show that apoptosis was effectively inhibited in cells expressing GIV-CARD. HeLa cells irradiated with UV or treated with anti-Fas antibody will undergo apoptosis through the intrinsic and extrinsic pathways, respectively. However, over-expression of recombinant GIV-CARD protein in HeLa cells inhibited apoptosis induced by mitochondrial and death receptor signaling. Finally, we report that expression of GIV-CARD in HeLa cells significantly reduced the activities of caspase-8 and -9 following apoptosis triggered by anti-Fas antibody. Taken together, these results demonstrate that GIV-CARD inhibits apoptosis through both intrinsic and extrinsic pathways. PMID:26047333
Applications of a sugar-based surveillance system to track arboviruses in wild mosquito populations.
van den Hurk, Andrew F; Hall-Mendelin, Sonja; Townsend, Michael; Kurucz, Nina; Edwards, Jim; Ehlers, Gerhard; Rodwell, Chris; Moore, Frederick A; McMahon, Jamie L; Northill, Judith A; Simmons, Russell J; Cortis, Giles; Melville, Lorna; Whelan, Peter I; Ritchie, Scott A
2014-01-01
Effective arbovirus surveillance is essential to ensure the implementation of control strategies, such as mosquito suppression, vaccination, or dissemination of public warnings. Traditional strategies employed for arbovirus surveillance, such as detection of virus or virus-specific antibodies in sentinel animals, or detection of virus in hematophagous arthropods, have limitations as an early-warning system. A system was recently developed that involves collecting mosquitoes in CO2-baited traps, where the insects expectorate virus on sugar-baited nucleic acid preservation cards. The cards are then submitted for virus detection using molecular assays. We report the application of this system for detecting flaviviruses and alphaviruses in wild mosquito populations in northern Australia. This study was the first to employ nonpowered passive box traps (PBTs) that were designed to house cards baited with honey as the sugar source. Overall, 20/144 (13.9%) of PBTs from different weeks contained at least one virus-positive card. West Nile virus Kunjin subtype (WNVKUN), Ross River virus (RRV), and Barmah Forest virus (BFV) were detected, being identified in 13/20, 5/20, and 2/20 of positive PBTs, respectively. Importantly, sentinel chickens deployed to detect flavivirus activity did not seroconvert at two Northern Territory sites where four PBTs yielded WNVKUN. Sufficient WNVKUN and RRV RNA was expectorated onto some of the honey-soaked cards to provide a template for gene sequencing, enhancing the utility of the sugar-bait surveillance system for investigating the ecology, emergence, and movement of arboviruses.
Abdulaziz, Kasim; Brehaut, Jamie; Taljaard, Monica; Émond, Marcel; Sirois, Marie-Josée; Lee, Jacques S; Wilding, Laura; Perry, Jeffrey J
2015-02-18
Physicians are a commonly targeted group in health research surveys, but their response rates are often relatively low. The goal of this paper was to evaluate the effect of unconditional incentives in the form of a coffee card on physician postal survey response rates. Following 13 key informant interviews and eight cognitive interviews a survey questionnaire was developed. A random sample of 534 physicians, stratified by physician group (geriatricians, family physicians, emergency physicians) was selected from a national medical directory. Using computer generated random numbers; half of the physicians in each stratum were allocated to receive a coffee card to a popular national coffee chain together with the first survey mailout. The intervention was a $10 Tim Hortons gift card given to half of the physicians who were randomly allocated to receive the incentive. 265 (57.0%) physicians completed the survey. The response rate was significantly higher in the group allocated to receive the incentive (62.7% vs 51.3% in the control group; p=0.01). Our results indicate that an unconditional incentive in the form of a coffee gift card can substantially improve physician response rates. Future research can look at the effect of varying amounts of cash on the gift cards on response rates. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Arbitrary numbers counter fair decisions: trails of markedness in card distribution.
Schroeder, Philipp A; Pfister, Roland
2015-01-01
Converging evidence from controlled experiments suggests that the mere processing of a number and its attributes such as value or parity might affect free choice decisions between different actions. For example the spatial numerical associations of response codes (SNARC) effect indicates the magnitude of a digit to be associated with a spatial representation and might therefore affect spatial response choices (i.e., decisions between a "left" and a "right" option). At the same time, other (linguistic) features of a number such as parity are embedded into space and might likewise prime left or right responses through feature words [odd or even, respectively; markedness association of response codes (MARC) effect]. In this experiment we aimed at documenting such influences in a natural setting. We therefore assessed number-space and parity-space association effects by exposing participants to a fair distribution task in a card playing scenario. Participants drew cards, read out loud their number values, and announced their response choice, i.e., dealing it to a left vs. right player, indicated by Playmobil characters. Not only did participants prefer to deal more cards to the right player, the card's digits also affected response choices and led to a slightly but systematically unfair distribution, supported by a regular SNARC effect and counteracted by a reversed MARC effect. The experiment demonstrates the impact of SNARC- and MARC-like biases in free choice behavior through verbal and visual numerical information processing even in a setting with high external validity.
Flexible Peripheral Component Interconnect Input/Output Card
NASA Technical Reports Server (NTRS)
Bigelow, Kirk K.; Jerry, Albert L.; Baricio, Alisha G.; Cummings, Jon K.
2010-01-01
The Flexible Peripheral Component Interconnect (PCI) Input/Output (I/O) Card is an innovative circuit board that provides functionality to interface between a variety of devices. It supports user-defined interrupts for interface synchronization, tracks system faults and failures, and includes checksum and parity evaluation of interface data. The card supports up to 16 channels of high-speed, half-duplex, low-voltage digital signaling (LVDS) serial data, and can interface combinations of serial and parallel devices. Placement of a processor within the field programmable gate array (FPGA) controls an embedded application with links to host memory over its PCI bus. The FPGA also provides protocol stacking and quick digital signal processor (DSP) functions to improve host performance. Hardware timers, counters, state machines, and other glue logic support interface communications. The Flexible PCI I/O Card provides an interface for a variety of dissimilar computer systems, featuring direct memory access functionality. The card has the following attributes: 8/16/32-bit, 33-MHz PCI r2.2 compliance, Configurable for universal 3.3V/5V interface slots, PCI interface based on PLX Technology's PCI9056 ASIC, General-use 512K 16 SDRAM memory, General-use 1M 16 Flash memory, FPGA with 3K to 56K logical cells with embedded 27K to 198K bits RAM, I/O interface: 32-channel LVDS differential transceivers configured in eight, 4-bit banks; signaling rates to 200 MHz per channel, Common SCSI-3, 68-pin interface connector.
Patron ID Cards Made Easy and Cheap
ERIC Educational Resources Information Center
Peischl, Tom
1978-01-01
Four major problems of academic library identification cards are expense, distribution, timeliness, and validation. By moving from a commercially produced plastic library card to a locally produced paper IBM-type card, this library solved these four library card problems. (Author)
A Low-Cost, Efficient, Machine-Assisted Manual Circulation System
ERIC Educational Resources Information Center
Stangl, Peter
1975-01-01
A circulation system uses plastic embossed user cards, an addressograph electric imprinter, a copy of the catalog card as a book card, and a pocket imprinted by the user's card and holding the book card during circulation. (LS)
2015-03-26
8 January 2015]. [34] M. Pursifull, " DIY Drones," 1 August 2012. [Online]. Available: http://diydrones.com/group/arducopterusergroup/forum/topics...Camp Atterbury Range Safety course and has his range control safety card . 2. GENERAL MINIMIZING CONDITIONS The following general minimizing
NASA Astrophysics Data System (ADS)
Zheng, Taixiong
2005-12-01
A neuro-fuzzy network based approach for robot motion in an unknown environment was proposed. In order to control the robot motion in an unknown environment, the behavior of the robot was classified into moving to the goal and avoiding obstacles. Then, according to the dynamics of the robot and the behavior character of the robot in an unknown environment, fuzzy control rules were introduced to control the robot motion. At last, a 6-layer neuro-fuzzy network was designed to merge from what the robot sensed to robot motion control. After being trained, the network may be used for robot motion control. Simulation results show that the proposed approach is effective for robot motion control in unknown environment.
NASA Technical Reports Server (NTRS)
1982-01-01
Neurodyne Corporation Human Tissue Stimulator (HTS) is a totally implantable system used for treatment of chronic pain and involuntary motion disorders by electrical stimulation. It was developed by Pacesetter Systems, Inc. in cooperation with the Applied Physics Laboratory. HTS incorporates a nickel cadmium battery, telemetry and command systems technologies of the same type as those used in NASA's Small Astronomy Satellite-3 in microminiature proportions so that the implantable element is the size of a deck of cards. The stimulator includes a rechargeable battery, an antenna and electronics to receive and process commands and to report on its own condition via telemetry, a wireless process wherein instrument data is converted to electrical signals and sent to a receiver where signals are presented as usable information. The HTS is targeted to nerve centers or to particular areas of the brain to provide relief from intractable pain or arrest involuntary motion. The nickel cadmium battery can be recharged through the skin. The first two HTS units were implanted last year and have been successful. Extensive testing is required before HTS can be made available for general use.
Family Registration Card as electronic medical carrier in Bosnia and Herzegovina.
Novo, Ahmed; Masic, Izet; Toromanovic, Selim; Loncarevic, Nedim; Junuzovic, Dzelaludin; Dizdarevic, Jadranka
2004-01-01
Medical documentation is a very important part of the medical documentalistics and is occupies a large part of daily work of medical staff working in Primary Health Care. Paper documentation is going to be replaced by electronic cards in Bosnia and Herzegovina and a new Health Care System is under development, based on an Electronic Family Registration Card. Developed countries proceeded from the manual and semiautomatic method of medical data processing to the new method of entering, storage, transferring, searching and protecting data, using electronic equipment. Currently, many European countries have developed a Medical Card Based Electronic Information System. Three types of electronic card are currently in use: a Hybrid Card, a Smart Card and a Laser Card. The dilemma is which card should be used as a data carrier. The Electronic Family Registration Cared is a question of strategic interest for B&H, but also a great investment. We should avoid the errors of other countries that have been developing card-based system. In this article we present all mentioned cards and compare advantages and disadvantages of different technologies.
Gas cooled traction drive inverter
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chinthavali, Madhu Sudhan
The present invention provides a modular circuit card configuration for distributing heat among a plurality of circuit cards. Each circuit card includes a housing adapted to dissipate heat in response to gas flow over the housing. In one aspect, a gas-cooled inverter includes a plurality of inverter circuit cards, and a plurality of circuit card housings, each of which encloses one of the plurality of inverter cards.
Gas cooled traction drive inverter
Chinthavali, Madhu Sudhan
2013-10-08
The present invention provides a modular circuit card configuration for distributing heat among a plurality of circuit cards. Each circuit card includes a housing adapted to dissipate heat in response to gas flow over the housing. In one aspect, a gas-cooled inverter includes a plurality of inverter circuit cards, and a plurality of circuit card housings, each of which encloses one of the plurality of inverter cards.
Application of an artificial neural network to pump card diagnosis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ashenayi, K.; Lea, J.F.; Kemp, F.
1994-12-01
Beam pumping is the most frequently used artificial-lift technique for oil production. Downhole pump cards are used to evaluate performance of the pumping unit. Pump cards can be generated from surface dynamometer cards using a 1D wave equation with viscous damping, as suggested by Gibbs and Neely. Pump cards contain significant information describing the behavior of the pump. However, interpretation of these cards is tedious and time-consuming; hence, an automated system capable of interpreting these cards could speed interpretation and warn of pump failures. This work presents the results of a DOS-based computer program capable of correctly classifying pump cards.more » The program uses a hybrid artificial neural network (ANN) to identify significant features of the pump card. The hybrid ANN uses classical and sinusoidal perceptrons. The network is trained using an error-back-propagation technique. The program correctly identified pump problems for more than 180 different training and test pump cards. The ANN takes a total of 80 data points as input. Sixty data points are collected from the pump card perimeter, and the remaining 20 data points represent the slope at selected points on the pump card perimeter. Pump problem conditions are grouped into 11 distinct classes. The network is capable of identifying one or more of these problem conditions for each pump card. Eight examples are presented and discussed.« less
Passive microfluidic array card and reader
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dugan, Lawrence Christopher; Coleman, Matthew A
A microfluidic array card and reader system for analyzing a sample. The microfluidic array card includes a sample loading section for loading the sample onto the microfluidic array card, a multiplicity of array windows, and a transport section or sections for transporting the sample from the sample loading section to the array windows. The microfluidic array card reader includes a housing, a receiving section for receiving the microfluidic array card, a viewing section, and a light source that directs light to the array window of the microfluidic array card and to the viewing section.
Guaranteeing Isochronous Control of Networked Motion Control Systems Using Phase Offset Adjustment
Kim, Ikhwan; Kim, Taehyoun
2015-01-01
Guaranteeing isochronous transfer of control commands is an essential function for networked motion control systems. The adoption of real-time Ethernet (RTE) technologies may be profitable in guaranteeing deterministic transfer of control messages. However, unpredictable behavior of software in the motion controller often results in unexpectedly large deviation in control message transmission intervals, and thus leads to imprecise motion. This paper presents a simple and efficient heuristic to guarantee the end-to-end isochronous control with very small jitter. The key idea of our approach is to adjust the phase offset of control message transmission time in the motion controller by investigating the behavior of motion control task. In realizing the idea, we performed a pre-runtime analysis to determine a safe and reliable phase offset and applied the phase offset to the runtime code of motion controller by customizing an open-source based integrated development environment (IDE). We also constructed an EtherCAT-based motion control system testbed and performed extensive experiments on the testbed to verify the effectiveness of our approach. The experimental results show that our heuristic is highly effective even for low-end embedded controller implemented in open-source software components under various configurations of control period and the number of motor drives. PMID:26076407
Medication safety--reliability of preference cards.
Dawson, Anthony; Orsini, Michael J; Cooper, Mary R; Wollenburg, Karol
2005-09-01
A CLINICAL ANALYSIS of surgeons' preference cards was initiated in one hospital as part of a comprehensive analysis to reduce medication-error risks by standardizing and simplifying the intraoperative medication-use process specific to the sterile field. THE PREFERENCE CARD ANALYSIS involved two subanalyses: a review of the information as it appeared on the cards and a failure mode and effects analysis of the process involved in using and maintaining the cards. THE ANALYSIS FOUND that the preference card system in use at this hospital is outdated. Variations and inconsistencies within the preference card system indicate that the use of preference cards as guides for medication selection for surgical procedures presents an opportunity for medication errors to occur.
48 CFR 32.1108 - Payment by Governmentwide commercial purchase card.
Code of Federal Regulations, 2010 CFR
2010-10-01
... commercial purchase card. 32.1108 Section 32.1108 Federal Acquisition Regulations System FEDERAL ACQUISITION... Governmentwide commercial purchase card. A Governmentwide commercial purchase card charge authorizes the third party (e.g., financial institution) that issued the purchase card to make immediate payment to the...
75 FR 10414 - Researcher Identification Card
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-08
... capturing administrative information on the characteristics of our users. Other forms of identification are... use bar-codes on researcher identification cards in the Washington, DC, area. The plastic cards we... plastic researcher identification cards as part of their security systems, we issue a plastic card to...
48 CFR 2913.301 - Governmentwide commercial purchase card.
Code of Federal Regulations, 2010 CFR
2010-10-01
... purchase card. 2913.301 Section 2913.301 Federal Acquisition Regulations System DEPARTMENT OF LABOR... commercial purchase card. (a) The Government purchase card has far fewer requirements for documentation than other methods of purchasing. However, the same legal restrictions apply to credit card purchases that...
Code of Federal Regulations, 2010 CFR
2010-04-01
... but not limited to, bingo card control, payout procedures, and cash reconciliation process; (ii) Pull... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for... COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.22 What are...
Code of Federal Regulations, 2010 CFR
2010-04-01
... but not limited to, bingo card control, payout procedures, and cash reconciliation process; (ii) Pull... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for... COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.32 What are...
14 CFR 29.779 - Motion and effect of cockpit controls.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Motion and effect of cockpit controls. 29... Accommodations § 29.779 Motion and effect of cockpit controls. Cockpit controls must be designed so that they... collective pitch control, must operate with a sense of motion which corresponds to the effect on the...
14 CFR 27.779 - Motion and effect of cockpit controls.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Motion and effect of cockpit controls. 27... Accommodations § 27.779 Motion and effect of cockpit controls. Cockpit controls must be designed so that they... collective pitch control, must operate with a sense of motion which corresponds to the effect on the...
14 CFR 29.779 - Motion and effect of cockpit controls.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Motion and effect of cockpit controls. 29... Accommodations § 29.779 Motion and effect of cockpit controls. Cockpit controls must be designed so that they... collective pitch control, must operate with a sense of motion which corresponds to the effect on the...
14 CFR 29.779 - Motion and effect of cockpit controls.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Motion and effect of cockpit controls. 29... Accommodations § 29.779 Motion and effect of cockpit controls. Cockpit controls must be designed so that they... collective pitch control, must operate with a sense of motion which corresponds to the effect on the...
14 CFR 27.779 - Motion and effect of cockpit controls.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Motion and effect of cockpit controls. 27... Accommodations § 27.779 Motion and effect of cockpit controls. Cockpit controls must be designed so that they... collective pitch control, must operate with a sense of motion which corresponds to the effect on the...
14 CFR 27.779 - Motion and effect of cockpit controls.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Motion and effect of cockpit controls. 27... Accommodations § 27.779 Motion and effect of cockpit controls. Cockpit controls must be designed so that they... collective pitch control, must operate with a sense of motion which corresponds to the effect on the...
14 CFR 29.779 - Motion and effect of cockpit controls.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Motion and effect of cockpit controls. 29... Accommodations § 29.779 Motion and effect of cockpit controls. Cockpit controls must be designed so that they... collective pitch control, must operate with a sense of motion which corresponds to the effect on the...
14 CFR 27.779 - Motion and effect of cockpit controls.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Motion and effect of cockpit controls. 27... Accommodations § 27.779 Motion and effect of cockpit controls. Cockpit controls must be designed so that they... collective pitch control, must operate with a sense of motion which corresponds to the effect on the...
14 CFR 29.779 - Motion and effect of cockpit controls.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Motion and effect of cockpit controls. 29... Accommodations § 29.779 Motion and effect of cockpit controls. Cockpit controls must be designed so that they... collective pitch control, must operate with a sense of motion which corresponds to the effect on the...
14 CFR 27.779 - Motion and effect of cockpit controls.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Motion and effect of cockpit controls. 27... Accommodations § 27.779 Motion and effect of cockpit controls. Cockpit controls must be designed so that they... collective pitch control, must operate with a sense of motion which corresponds to the effect on the...
You Can Teach an Old Magician New Tricks
ERIC Educational Resources Information Center
Bonomo, John P.
2008-01-01
Mathematics forms the basis for many types of card tricks. One of the best-known works as follows: Take any 15 cards out of a deck and ask a volunteer to select one of the cards and place it back in the deck. After shuffling the cards, you deal out three piles of cards and ask the volunteer which pile his or her card is in. You collect up the…
Correlates of credit card ownership in men and women.
Yang, Bijou; Lester, David
2005-06-01
In a sample of 352 students, correlates of credit card ownership differed by sex. For both men and women, credit card ownership was predicted by their affective attitude toward credit cards. However, whereas for men concern with money as a tactic for gaining power predicted credit card ownership, for women feelings of insecurity about having sufficient money and having a conservative approach to money predicted credit card ownership.
Renna, Tania Di; Crooks, Simone; Pigford, Ashlee-Ann; Clarkin, Chantalle; Fraser, Amy B; Bunting, Alexandra C; Bould, M Dylan; Boet, Sylvain
2016-09-01
This study aimed to assess the perceived value of the Cognitive Aids for Role Definition (CARD) protocol for simulated intraoperative cardiac arrests. Sixteen interprofessional operating room teams completed three consecutive simulated intraoperative cardiac arrest scenarios: current standard, no CARD; CARD, no CARD teaching; and CARD, didactic teaching. Each team participated in a focus group interview immediately following the third scenario; data were transcribed verbatim and qualitatively analysed. After 6 months, participants formed eight new teams randomised to two groups (CARD or no CARD) and completed a retention intraoperative cardiac arrest simulation scenario. All simulation sessions were video recorded and expert raters assessed team performance. Qualitative analysis of the 16 focus group interviews revealed 3 thematic dimensions: role definition in crisis management; logistical issues; and the "real life" applicability of CARD. Members of the interprofessional team perceived CARD very positively. Exploratory quantitative analysis found no significant differences in team performance with or without CARD (p > 0.05). In conclusion, qualitative data suggest that the CARD protocol clarifies roles and team coordination during interprofessional crisis management and has the potential to improve the team performance. The concept of a self-organising team with defined roles is promising for patient safety.
BioSentinel: Developing a Space Radiation Biosensor
NASA Technical Reports Server (NTRS)
Santa Maria, Sergio R.
2015-01-01
BioSentinel is an autonomous fully self-contained science mission that will conduct the first study of the biological response to space radiation outside low Earth orbit (LEO) in over 40 years. The 4-unit (4U) BioSentinel biosensor system, is housed within a 6-Unit (6U) spacecraft, and uses yeast cells in multiple independent microfluidic cards to detect and measure DNA damage that occurs in response to ambient space radiation. Cell growth and metabolic activity will be measured using a 3-color LED detection system and a metabolic indicator dye with a dedicated thermal control system per fluidic card.
Evolution of a Novel Antiviral Immune-Signaling Interaction by Partial-Gene Duplication
Korithoski, Bryan; Kolaczkowski, Oralia; Mukherjee, Krishanu; Kola, Reema; Earl, Chandra; Kolaczkowski, Bryan
2015-01-01
The RIG-like receptors (RLRs) are related proteins that identify viral RNA in the cytoplasm and activate cellular immune responses, primarily through direct protein-protein interactions with the signal transducer, IPS1. Although it has been well established that the RLRs, RIG-I and MDA5, activate IPS1 through binding between the twin caspase activation and recruitment domains (CARDs) on the RLR and a homologous CARD on IPS1, it is less clear which specific RLR CARD(s) are required for this interaction, and almost nothing is known about how the RLR-IPS1 interaction evolved. In contrast to what has been observed in the presence of immune-modulating K63-linked polyubiquitin, here we show that—in the absence of ubiquitin—it is the first CARD domain of human RIG-I and MDA5 (CARD1) that binds directly to IPS1 CARD, and not the second (CARD2). Although the RLRs originated in the earliest animals, both the IPS1 gene and the twin-CARD domain architecture of RIG-I and MDA5 arose much later in the deuterostome lineage, probably through a series of tandem partial-gene duplication events facilitated by tight clustering of RLRs and IPS1 in the ancestral deuterostome genome. Functional differentiation of RIG-I CARD1 and CARD2 appears to have occurred early during this proliferation of RLR and related CARDs, potentially driven by adaptive coevolution between RIG-I CARD domains and IPS1 CARD. However, functional differentiation of MDA5 CARD1 and CARD2 occurred later. These results fit a general model in which duplications of protein-protein interaction domains into novel gene contexts could facilitate the expansion of signaling networks and suggest a potentially important role for functionally-linked gene clusters in generating novel immune-signaling pathways. PMID:26356745
Contrast gain control in first- and second-order motion perception.
Lu, Z L; Sperling, G
1996-12-01
A novel pedestal-plus-test paradigm is used to determine the nonlinear gain-control properties of the first-order (luminance) and the second-order (texture-contrast) motion systems, that is, how these systems' responses to motion stimuli are reduced by pedestals and other masking stimuli. Motion-direction thresholds were measured for test stimuli consisting of drifting luminance and texture-contrast-modulation stimuli superimposed on pedestals of various amplitudes. (A pedestal is a static sine-wave grating of the same type and same spatial frequency as the moving test grating.) It was found that first-order motion-direction thresholds are unaffected by small pedestals, but at pedestal contrasts above 1-2% (5-10 x pedestal threshold), motion thresholds increase proportionally to pedestal amplitude (a Weber law). For first-order stimuli, pedestal masking is specific to the spatial frequency of the test. On the other hand, motion-direction thresholds for texture-contrast stimuli are independent of pedestal amplitude (no gain control whatever) throughout the accessible pedestal amplitude range (from 0 to 40%). However, when baseline carrier contrast increases (with constant pedestal modulation amplitude), motion thresholds increase, showing that gain control in second-order motion is determined not by the modulator (as in first-order motion) but by the carrier. Note that baseline contrast of the carrier is inherently independent of spatial frequency of the modulator. The drastically different gain-control properties of the two motion systems and prior observations of motion masking and motion saturation are all encompassed in a functional theory. The stimulus inputs to both first- and second-order motion process are normalized by feedforward, shunting gain control. The different properties arise because the modulator is used to control the first-order gain and the carrier is used to control the second-order gain.
Real-time operation without a real-time operating system for instrument control and data acquisition
NASA Astrophysics Data System (ADS)
Klein, Randolf; Poglitsch, Albrecht; Fumi, Fabio; Geis, Norbert; Hamidouche, Murad; Hoenle, Rainer; Looney, Leslie; Raab, Walfried; Viehhauser, Werner
2004-09-01
We are building the Field-Imaging Far-Infrared Line Spectrometer (FIFI LS) for the US-German airborne observatory SOFIA. The detector read-out system is driven by a clock signal at a certain frequency. This signal has to be provided and all other sub-systems have to work synchronously to this clock. The data generated by the instrument has to be received by a computer in a timely manner. Usually these requirements are met with a real-time operating system (RTOS). In this presentation we want to show how we meet these demands differently avoiding the stiffness of an RTOS. Digital I/O-cards with a large buffer separate the asynchronous working computers and the synchronous working instrument. The advantage is that the data processing computers do not need to process the data in real-time. It is sufficient that the computer can process the incoming data stream on average. But since the data is read-in synchronously, problems of relating commands and responses (data) have to be solved: The data is arriving at a fixed rate. The receiving I/O-card buffers the data in its buffer until the computer can access it. To relate the data to commands sent previously, the data is tagged by counters in the read-out electronics. These counters count the system's heartbeat and signals derived from that. The heartbeat and control signals synchronous with the heartbeat are sent by an I/O-card working as pattern generator. Its buffer gets continously programmed with a pattern which is clocked out on the control lines. A counter in the I/O-card keeps track of the amount of pattern words clocked out. By reading this counter, the computer knows the state of the instrument or knows the meaning of the data that will arrive with a certain time-tag.
48 CFR 552.232-77 - Payment By Government Charge Card.
Code of Federal Regulations, 2010 CFR
2010-10-01
... Charge Card. 552.232-77 Section 552.232-77 Federal Acquisition Regulations System GENERAL SERVICES....232-77 Payment By Government Charge Card. As prescribed in 532.7003, insert the following clause: Payment By Government Charge Card (NOV 2009) (a) Definitions. “Governmentwide commercial purchase card...
Motion-mode energy method for vehicle dynamics analysis and control
NASA Astrophysics Data System (ADS)
Zhang, Nong; Wang, Lifu; Du, Haiping
2014-01-01
Vehicle motion and vibration control is a fundamental motivation for the development of advanced vehicle suspension systems. In a vehicle-fixed coordinate system, the relative motions of the vehicle between body and wheel can be classified into several dynamic stages based on energy intensity, and can be decomposed into sets of uncoupled motion-modes according to modal parameters. Vehicle motions are coupled, but motion-modes are orthogonal. By detecting and controlling the predominating vehicle motion-mode, the system cost and energy consumption of active suspensions could be reduced. A motion-mode energy method (MEM) is presented in this paper to quantify the energy contribution of each motion-mode to vehicle dynamics in real time. The control of motion-modes is prioritised according to the level of motion-mode energy. Simulation results on a 10 degree-of-freedom nonlinear full-car model with the magic-formula tyre model illustrate the effectiveness of the proposed MEM. The contribution of each motion-mode to the vehicle's dynamic behaviour is analysed under different excitation inputs from road irregularities, directional manoeuvres and braking. With the identified dominant motion-mode, novel cost-effective suspension systems, such as active reconfigurable hydraulically interconnected suspension, can possibly be used to control full-car motions with reduced energy consumption. Finally, discussion, conclusions and suggestions for future work are provided.
Effects of Motion Cues on the Training of Multi-Axis Manual Control Skills
NASA Technical Reports Server (NTRS)
Zaal, Peter M. T.; Mobertz, Xander R. I.
2017-01-01
The study described in this paper investigated the effects of two different hexapod motion configurations on the training and transfer of training of a simultaneous roll and pitch control task. Pilots were divided between two groups which trained either under a baseline hexapod motion condition, with motion typically provided by current training simulators, or an optimized hexapod motion condition, with increased fidelity of the motion cues most relevant for the task. All pilots transferred to the same full-motion condition, representing motion experienced in flight. A cybernetic approach was used that gave insights into the development of pilots use of visual and motion cues over the course of training and after transfer. Based on the current results, neither of the hexapod motion conditions can unambiguously be chosen as providing the best motion for training and transfer of training of the used multi-axis control task. However, the optimized hexapod motion condition did allow pilots to generate less visual lead, control with higher gains, and have better disturbance-rejection performance at the end of the training session compared to the baseline hexapod motion condition. Significant adaptations in control behavior still occurred in the transfer phase under the full-motion condition for both groups. Pilots behaved less linearly compared to previous single-axis control-task experiments; however, this did not result in smaller motion or learning effects. Motion and learning effects were more pronounced in pitch compared to roll. Finally, valuable lessons were learned that allow us to improve the adopted approach for future transfer-of-training studies.
Credit Cards. Bulletin No. 721. (Revised.)
ERIC Educational Resources Information Center
Fox, Linda Kirk
This cooperative extension bulletin provides basic information about credit cards and their use. It covers the following topics: types of credit cards (revolving credit, travel and entertainment, and debit); factors to consider when evaluating a credit card (interest rates, grace period, and annual membership fee); other credit card costs (late…
Code of Federal Regulations, 2014 CFR
2014-01-01
... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card...
Code of Federal Regulations, 2013 CFR
2013-01-01
... 12 Banks and Banking 1 2013-01-01 2013-01-01 false Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card...
Code of Federal Regulations, 2013 CFR
2013-01-01
... 12 Banks and Banking 6 2013-01-01 2012-01-01 true Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... credit card relationships, servicing assets, intangible assets (other than purchased credit card...
Code of Federal Regulations, 2012 CFR
2012-01-01
... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card...
Code of Federal Regulations, 2012 CFR
2012-01-01
... 12 Banks and Banking 6 2012-01-01 2012-01-01 false Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... credit card relationships, servicing assets, intangible assets (other than purchased credit card...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-25
... savings associations). The OCC requires independent credit card banks and independent credit card Federal... by the bank or Federal savings association. Independent credit card banks and independent credit card... credit card operations and are not affiliated with a full service national bank or Federal savings...
Code of Federal Regulations, 2014 CFR
2014-01-01
... 12 Banks and Banking 6 2014-01-01 2012-01-01 true Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... credit card relationships, servicing assets, intangible assets (other than purchased credit card...
Index Nuclear Wallet Cards Contents Current Version Radioactive Nuclides (Homeland Security) Nuclear Materials Management & Safeguards System 8th Edition 2011 Nuclear Wallet Cards Resources Search Nuclear Wallet Cards 8th Edition PDF Format 8thEdition, Android Market Download Nuclear Wallet Cards Nuclear
Evolution of optically nondestructive and data-non-intrusive credit card verifiers
NASA Astrophysics Data System (ADS)
Sumriddetchkajorn, Sarun; Intaravanne, Yuttana
2010-04-01
Since the deployment of the credit card, the number of credit card fraud cases has grown rapidly with a huge amount of loss in millions of US dollars. Instead of asking more information from the credit card's holder or taking risk through payment approval, a nondestructive and data-non-intrusive credit card verifier is highly desirable before transaction begins. In this paper, we review optical techniques that have been proposed and invented in order to make the genuine credit card more distinguishable than the counterfeit credit card. Several optical approaches for the implementation of credit card verifiers are also included. In particular, we highlight our invention on a hyperspectral-imaging based portable credit card verifier structure that offers a very low false error rate of 0.79%. Other key features include low cost, simplicity in design and implementation, no moving part, no need of an additional decoding key, and adaptive learning.
Three dimensional identification card and applications
NASA Astrophysics Data System (ADS)
Zhou, Changhe; Wang, Shaoqing; Li, Chao; Li, Hao; Liu, Zhao
2016-10-01
Three dimensional Identification Card, with its three-dimensional personal image displayed and stored for personal identification, is supposed be the advanced version of the present two-dimensional identification card in the future [1]. Three dimensional Identification Card means that there are three-dimensional optical techniques are used, the personal image on ID card is displayed to be three-dimensional, so we can see three dimensional personal face. The ID card also stores the three-dimensional face information in its inside electronics chip, which might be recorded by using two-channel cameras, and it can be displayed in computer as three-dimensional images for personal identification. Three-dimensional ID card might be one interesting direction to update the present two-dimensional card in the future. Three-dimension ID card might be widely used in airport custom, entrance of hotel, school, university, as passport for on-line banking, registration of on-line game, etc...
Design and implementation of a smart card based healthcare information system.
Kardas, Geylani; Tunali, E Turhan
2006-01-01
Smart cards are used in information technologies as portable integrated devices with data storage and data processing capabilities. As in other fields, smart card use in health systems became popular due to their increased capacity and performance. Their efficient use with easy and fast data access facilities leads to implementation particularly widespread in security systems. In this paper, a smart card based healthcare information system is developed. The system uses smart card for personal identification and transfer of health data and provides data communication via a distributed protocol which is particularly developed for this study. Two smart card software modules are implemented that run on patient and healthcare professional smart cards, respectively. In addition to personal information, general health information about the patient is also loaded to patient smart card. Health care providers use their own smart cards to be authenticated on the system and to access data on patient cards. Encryption keys and digital signature keys stored on smart cards of the system are used for secure and authenticated data communication between clients and database servers over distributed object protocol. System is developed on Java platform by using object oriented architecture and design patterns.
Qin, Haihong; Jin, Jiang; Fischer, Heinz; Mildner, Michael; Gschwandtner, Maria; Mlitz, Veronika; Eckhart, Leopold; Tschachler, Erwin
2017-08-01
CARD18 contains a caspase recruitment domain (CARD) via which it binds to caspase-1 and thereby inhibits caspase-1-mediated activation of the pro-inflammatory cytokine interleukin (IL)-1β. To determine the expression profile and the role of CARD18 during differentiation of keratinocytes and to compare the expression of CARD18 in normal skin and in inflammatory skin diseases. Human keratinocytes were induced to differentiate in monolayer and in 3D skin equivalent cultures. In some experiments, CARD18-specific siRNAs were used to knock down expression of CARD18. CARD18 mRNA levels were determined by quantitative real-time PCR, and CARD18 protein was detected by Western blot and immunofluorescence analyses. In situ expression was analyzed in skin biopsies obtained from healthy donors and patients with psoriasis and lichen planus. CARD18 mRNA was expressed in the epidermis at more than 100-fold higher levels than in any other human tissue. Within the epidermis, CARD18 was specifically expressed in the granular layer. In vitro CARD18 was strongly upregulated at both mRNA and protein levels in keratinocytes undergoing terminal differentiation. In skin equivalent cultures the expression of CARD18 was efficiently suppressed by siRNAs without impairing stratum corneum formation. Epidermal expression of CARD18 was increased after ultraviolet (UV)B irradiation of skin explants. In skin biopsies of patients with psoriasis no consistent regulation of CARD18 expression was observed, however, in lesional epidermis of patients with lichen planus, CARD18 expression was either greatly diminished or entirely absent whereas in non-lesional areas expression was comparable to normal skin. Our results identify CARD18 as a differentiation-associated keratinocyte protein that is altered in abundance by UV stress. Its downregulation in lichen planus indicates a potential role in inflammatory reactions of the epidermis in this disease. Copyright © 2017 Japanese Society for Investigative Dermatology. Published by Elsevier B.V. All rights reserved.
Impact of interventions for patients refusing emergency medical services transport.
Alicandro, J; Hollander, J E; Henry, M C; Sciammarella, J; Stapleton, E; Gentile, D
1995-06-01
To evaluate the effect of a documentation checklist and on-line medical control contact on ambulance transport of out-of-hospital patients refusing medical assistance. Consecutive patients served by four suburban ambulance services who initially refused emergency medical services (EMS) transport to the hospital were prospectively enrolled. In phase 1 (control phase), all patients who initially refused medical attention or transport had an identifying data card completed. In phase 2 (documentation phase), out-of-hospital providers completed a similar data card that contained a checklist of high-risk criteria for a poor outcome if not transported. In phase 3 (intervention phase), a data card similar to that used in phase 2 was completed, and on-line medical control was contacted for all patients with high-risk criteria who refused transport. The primary endpoint was the percentage of patients transported to the hospital. A total of 361 patients were enrolled. Transport rate varied by phase: control, 17 of 144 (12%); documentation, 11 of 150 (7%); and intervention, 12 of 67 (18%) (chi-square, p = 0.023). Transport of high-risk patients improved with each intervention: control, two of 60 (3%); documentation, seven of 70 (10%); and intervention, 12 of 34 (35%) (chi-square, p = 0.00003). Transport of patients without high-risk criteria decreased with each intervention: control, 15 of 84 (18%); documentation, four of 80 (5%); and intervention, 0 of 33 (0%) (p = 0.0025). Of the 28 patients for whom medical control was contacted, 12 (43%) were transported to the hospital, and only three of these 12 patients (25%) were released from the ED. Contact with on-line medical control increased the likelihood of transport of high-risk patients who initially refused medical assistance. The appropriateness of the decreased transport rate of patients not meeting high-risk criteria needs further evaluation.
Mikhael, Joseph; Baker, Lindsay; Downar, James
2008-08-01
End-of-life care is suboptimally taught in undergraduate and postgraduate education in Canada. Previous interventions to improve residents' knowledge and comfort have involved lengthy comprehensive educational modules or dedicated palliative care rotations. To determine the effectiveness of a cheap, portable, and easily implemented pocket reference for improving residents' knowledge and comfort level in dealing with pain and symptom management on the medical ward. Cluster-randomized controlled trial conducted from August 2005 to June 2006. Medical clinical teaching units (CTUs) in 3 academic hospitals in Toronto, Canada. All residents rotating through the medical CTUs who consented to participate in the study. Residents at 1 hospital received a pocket reference including information about pain and symptom control, as well as 1-2 didactic end-of-life teaching sessions per month normally given as part of the rotation. Residents at the other 2 hospitals received only the didactic sessions. A 10-question survey assessing knowledge and comfort level providing end-of-life care to medical inpatients, as well as focus group interviews. One hundred thirty-six residents participated on 3 CTUs for a participation rate of approximately 75%. Comfort levels improved in both control (p < .01) and intervention groups (p < .01), but the increase in comfort level was significantly higher in the intervention group (z = 2.57, p < .01). Knowledge was not significantly improved in the control group (p = .06), but was significantly improved in the intervention group (p = .01). Greater than 90% of residents in the intervention group used the card at least once per week, and feedback from the focus groups was very positive. Our pocket card is a feasible, economical, and educational intervention that improves resident comfort level and knowledge in delivering end-of-life care on CTUs.
Kuhn, Gustav; Teszka, Robert; Tenaw, Natalia; Kingstone, Alan
2016-01-01
People's attention is oriented towards faces, but the extent to which these social attention effects are under top down control is more ambiguous. Our first aim was to measure and compare, in real life and in the lab, people's top-down control over overt and covert shifts in reflexive social attention to the face of another. We employed a magic trick in which the magician used social cues (i.e. asking a question whilst establishing eye contact) to misdirect attention towards his face, and thus preventing participants from noticing a visible colour change to a playing card. Our results show that overall people spend more time looking at the magician's face when he is seen on video than in reality. Additionally, although most participants looked at the magician's face when misdirected, this tendency to look at the face was modulated by instruction (i.e., "keep your attention on the cards"), and therefore, by top down control. Moreover, while the card's colour change was fully visible, the majority of participants failed to notice the change, and critically, change detection (our measure of covert attention) was not affected by where people looked (overt attention). We conclude that there is a tendency to shift overt and covert attention reflexively to faces, but that people exert more top down control over this overt shift in attention. These finding are discussed within a new framework that focuses on the role of eye movements as an attentional process as well as a form of non-verbal communication. Copyright © 2015 Elsevier B.V. All rights reserved.
Punch Card Programmable Microfluidics
Korir, George; Prakash, Manu
2015-01-01
Small volume fluid handling in single and multiphase microfluidics provides a promising strategy for efficient bio-chemical assays, low-cost point-of-care diagnostics and new approaches to scientific discoveries. However multiple barriers exist towards low-cost field deployment of programmable microfluidics. Incorporating multiple pumps, mixers and discrete valve based control of nanoliter fluids and droplets in an integrated, programmable manner without additional required external components has remained elusive. Combining the idea of punch card programming with arbitrary fluid control, here we describe a self-contained, hand-crank powered, multiplex and robust programmable microfluidic platform. A paper tape encodes information as a series of punched holes. A mechanical reader/actuator reads these paper tapes and correspondingly executes operations onto a microfluidic chip coupled to the platform in a plug-and-play fashion. Enabled by the complexity of codes that can be represented by a series of holes in punched paper tapes, we demonstrate independent control of 15 on-chip pumps with enhanced mixing, normally-closed valves and a novel on-demand impact-based droplet generator. We demonstrate robustness of operation by encoding a string of characters representing the word “PUNCHCARD MICROFLUIDICS” using the droplet generator. Multiplexing is demonstrated by implementing an example colorimetric water quality assays for pH, ammonia, nitrite and nitrate content in different water samples. With its portable and robust design, low cost and ease-of-use, we envision punch card programmable microfluidics will bring complex control of microfluidic chips into field-based applications in low-resource settings and in the hands of children around the world. PMID:25738834
Punch card programmable microfluidics.
Korir, George; Prakash, Manu
2015-01-01
Small volume fluid handling in single and multiphase microfluidics provides a promising strategy for efficient bio-chemical assays, low-cost point-of-care diagnostics and new approaches to scientific discoveries. However multiple barriers exist towards low-cost field deployment of programmable microfluidics. Incorporating multiple pumps, mixers and discrete valve based control of nanoliter fluids and droplets in an integrated, programmable manner without additional required external components has remained elusive. Combining the idea of punch card programming with arbitrary fluid control, here we describe a self-contained, hand-crank powered, multiplex and robust programmable microfluidic platform. A paper tape encodes information as a series of punched holes. A mechanical reader/actuator reads these paper tapes and correspondingly executes operations onto a microfluidic chip coupled to the platform in a plug-and-play fashion. Enabled by the complexity of codes that can be represented by a series of holes in punched paper tapes, we demonstrate independent control of 15 on-chip pumps with enhanced mixing, normally-closed valves and a novel on-demand impact-based droplet generator. We demonstrate robustness of operation by encoding a string of characters representing the word "PUNCHCARD MICROFLUIDICS" using the droplet generator. Multiplexing is demonstrated by implementing an example colorimetric water quality assays for pH, ammonia, nitrite and nitrate content in different water samples. With its portable and robust design, low cost and ease-of-use, we envision punch card programmable microfluidics will bring complex control of microfluidic chips into field-based applications in low-resource settings and in the hands of children around the world.
Tamzaourte, Mouna; Errabih, Ikram; Krami, Hayat; Maha, Fadlouallah; Maria, Lahmiri; Benzzoubeir, Nadia; Ouazzani, Laaziza; Sefiani, Ahmed; Ouazzani, Houria
2017-01-01
The aim of this study was to determine the prevalence of NOD2/CARD15 gene mutations in a group of Moroccan patients with Crohn's disease and to study its correlation with genotype-phenotypic expression. We conducted a cross-sectional case-control study over a period of 16 months. 101 patients with Crohn's disease were enrolled between January 2012 and April 2013 as well as a control group of 107 patients. We performed a genetic analysis to identify 3 NOD2 gene variants: p.Arg702Trp, p.Gly908Arg and p.Leu1007fsins. Then we conducted a study of the correlation between genotype and phenotypic expression. The genetic analysis of patients with Crohn's disease highlighted the presence of NOD2 mutation in 14 patients (13.77%) versus 7 patients (6.53%) in the control group. The study of the frequency of different alleles showed p.Gly908Arg mutation in 6.43%, p.Leu1007fsins in 0.99% and p.Arg702Trp in 0.49% versus 2.80%, 0% and 0.46% in the control group respectively. The study of the correlation between genotype and phenotypic expression showed that CARD15 mutation is associated with ileocecal Crohn's disease, with fistulizing and stenosing behavior in Crohn's disease as well as with severe evolution and frequent recourse to surgery and immunosuppressants. The prevalence of NOD2/ CARD15 mutation in our case series is low. This mutation is correlated with severe Crohn's disease.
Villard, P F; Vidal, F P; Hunt, C; Bello, F; John, N W; Johnson, S; Gould, D A
2009-11-01
We present here a simulator for interventional radiology focusing on percutaneous transhepatic cholangiography (PTC). This procedure consists of inserting a needle into the biliary tree using fluoroscopy for guidance. The requirements of the simulator have been driven by a task analysis. The three main components have been identified: the respiration, the real-time X-ray display (fluoroscopy) and the haptic rendering (sense of touch). The framework for modelling the respiratory motion is based on kinematics laws and on the Chainmail algorithm. The fluoroscopic simulation is performed on the graphic card and makes use of the Beer-Lambert law to compute the X-ray attenuation. Finally, the haptic rendering is integrated to the virtual environment and takes into account the soft-tissue reaction force feedback and maintenance of the initial direction of the needle during the insertion. Five training scenarios have been created using patient-specific data. Each of these provides the user with variable breathing behaviour, fluoroscopic display tuneable to any device parameters and needle force feedback. A detailed task analysis has been used to design and build the PTC simulator described in this paper. The simulator includes real-time respiratory motion with two independent parameters (rib kinematics and diaphragm action), on-line fluoroscopy implemented on the Graphics Processing Unit and haptic feedback to feel the soft-tissue behaviour of the organs during the needle insertion.
PC/AT-based architecture for shared telerobotic control
NASA Astrophysics Data System (ADS)
Schinstock, Dale E.; Faddis, Terry N.; Barr, Bill G.
1993-03-01
A telerobotic control system must include teleoperational, shared, and autonomous modes of control in order to provide a robot platform for incorporating the rapid advances that are occurring in telerobotics and associated technologies. These modes along with the ability to modify the control algorithms are especially beneficial for telerobotic control systems used for research purposes. The paper describes an application of the PC/AT platform to the control system of a telerobotic test cell. The paper provides a discussion of the suitability of the PC/AT as a platform for a telerobotic control system. The discussion is based on the many factors affecting the choice of a computer platform for a real time control system. The factors include I/O capabilities, simplicity, popularity, computational performance, and communication with external systems. The paper also includes a description of the actuation, measurement, and sensor hardware of both the master manipulator and the slave robot. It also includes a description of the PC-Bus interface cards. These cards were developed by the researchers in the KAT Laboratory, specifically for interfacing to the master manipulator and slave robot. Finally, a few different versions of the low level telerobotic control software are presented. This software incorporates shared control by supervisory systems and the human operator and traded control between supervisory systems and the human operator.
Let me take the wheel: Illusory control and sense of agency
Tobias-Webb, Juliette; Limbrick-Oldfield, Eve H.; Gillan, Claire M.; Moore, James W.; Aitken, Michael R. F.; Clark, Luke
2017-01-01
ABSTRACT Illusory control refers to an effect in games of chance where features associated with skilful situations increase expectancies of success. Past work has operationalized illusory control in terms of subjective ratings or behaviour, with limited consideration of the relationship between these definitions, or the broader construct of agency. This study used a novel card-guessing task in 78 participants to investigate the relationship between subjective and behavioural illusory control. We compared trials in which participants (a) had no opportunity to exercise illusory control, (b) could exercise illusory control for free, or (c) could pay to exercise illusory control. Contingency Judgment and Intentional Binding tasks assessed explicit and implicit sense of agency, respectively. On the card-guessing task, confidence was higher when participants exerted control than in the baseline condition. In a complementary model, participants were more likely to exercise control when their confidence was high, and this effect was accentuated in the pay condition relative to the free condition. Decisions to pay were positively correlated with control ratings on the Contingency Judgment task, but were not significantly related to Intentional Binding. These results establish an association between subjective and behavioural illusory control and locate the construct within the cognitive literature on agency. PMID:27376771
The research of laser marking control technology
NASA Astrophysics Data System (ADS)
Zhang, Qiue; Zhang, Rong
2009-08-01
In the area of Laser marking, the general control method is insert control card to computer's mother board, it can not support hot swap, it is difficult to assemble or it. Moreover, the one marking system must to equip one computer. In the system marking, the computer can not to do the other things except to transmit marking digital information. Otherwise it can affect marking precision. Based on traditional control methods existed some problems, introduced marking graphic editing and digital processing by the computer finish, high-speed digital signal processor (DSP) control marking the whole process. The laser marking controller is mainly contain DSP2812, digital memorizer, DAC (digital analog converting) transform unit circuit, USB interface control circuit, man-machine interface circuit, and other logic control circuit. Download the marking information which is processed by computer to U disk, DSP read the information by USB interface on time, then processing it, adopt the DSP inter timer control the marking time sequence, output the scanner control signal by D/A parts. Apply the technology can realize marking offline, thereby reduce the product cost, increase the product efficiency. The system have good effect in actual unit markings, the marking speed is more quickly than PCI control card to 20 percent. It has application value in practicality.
A History of Computer Numerical Control.
ERIC Educational Resources Information Center
Haggen, Gilbert L.
Computer numerical control (CNC) has evolved from the first significant counting method--the abacus. Babbage had perhaps the greatest impact on the development of modern day computers with his analytical engine. Hollerith's functioning machine with punched cards was used in tabulating the 1890 U.S. Census. In order for computers to become a…
12 CFR 226.12 - Special credit card provisions.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Special credit card provisions. 226.12 Section... SYSTEM TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including...
37 CFR 1.23 - Methods of payment.
Code of Federal Regulations, 2010 CFR
2010-07-01
... made by credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process... authorization to charge fees to a credit card. If credit card information is provided on a form or document...
12 CFR 226.12 - Special credit card provisions.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 12 Banks and Banking 3 2013-01-01 2013-01-01 false Special credit card provisions. 226.12 Section... SYSTEM (CONTINUED) TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used...
37 CFR 1.23 - Methods of payment.
Code of Federal Regulations, 2011 CFR
2011-07-01
... made by credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process... authorization to charge fees to a credit card. If credit card information is provided on a form or document...
12 CFR 1026.12 - Special credit card provisions.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 12 Banks and Banking 8 2012-01-01 2012-01-01 false Special credit card provisions. 1026.12 Section...-End Credit § 1026.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including business, commercial, or agricultural use, no...
37 CFR 1.23 - Methods of payment.
Code of Federal Regulations, 2014 CFR
2014-07-01
... made by credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process... authorization to charge fees to a credit card. If credit card information is provided on a form or document...
12 CFR Rules for Card Issuers That... - by-Transaction Basis
Code of Federal Regulations, 2011 CFR
2011-01-01
... THE FEDERAL RESERVE SYSTEM TRUTH IN LENDING (REGULATION Z) Special Rules Applicable to Credit Card... Subpart B apply if credit cards are issued and the card issuer and the seller are the same or related... creditor have an agreement authorizing the seller to honor the creditor's credit card. 1. Section 226.6(a...
12 CFR 1026.12 - Special credit card provisions.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 12 Banks and Banking 9 2014-01-01 2014-01-01 false Special credit card provisions. 1026.12 Section...-End Credit § 1026.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including business, commercial, or agricultural use, no...
12 CFR Rules for Card Issuers That... - by-Transaction Basis
Code of Federal Regulations, 2012 CFR
2012-01-01
... THE FEDERAL RESERVE SYSTEM TRUTH IN LENDING (REGULATION Z) Special Rules Applicable to Credit Card... Subpart B apply if credit cards are issued and the card issuer and the seller are the same or related... creditor have an agreement authorizing the seller to honor the creditor's credit card. 1. Section 226.6(a...
12 CFR 226.12 - Special credit card provisions.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 12 Banks and Banking 3 2011-01-01 2011-01-01 false Special credit card provisions. 226.12 Section... SYSTEM TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including...
12 CFR 226.12 - Special credit card provisions.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 12 Banks and Banking 3 2014-01-01 2014-01-01 false Special credit card provisions. 226.12 Section... SYSTEM (CONTINUED) TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used...
12 CFR 226.12 - Special credit card provisions.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 12 Banks and Banking 3 2012-01-01 2012-01-01 false Special credit card provisions. 226.12 Section... SYSTEM TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including...
37 CFR 1.23 - Methods of payment.
Code of Federal Regulations, 2013 CFR
2013-07-01
... made by credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process... authorization to charge fees to a credit card. If credit card information is provided on a form or document...
12 CFR 1026.12 - Special credit card provisions.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 12 Banks and Banking 8 2013-01-01 2013-01-01 false Special credit card provisions. 1026.12 Section...-End Credit § 1026.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including business, commercial, or agricultural use, no...
Code of Federal Regulations, 2014 CFR
2014-04-01
... identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. 41.32 Section 41.32 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE... crossing identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. (a...
Code of Federal Regulations, 2010 CFR
2010-04-01
... identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. 41.32 Section 41.32 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE... crossing identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. (a...
Code of Federal Regulations, 2013 CFR
2013-04-01
... identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. 41.32 Section 41.32 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE... crossing identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. (a...
Code of Federal Regulations, 2011 CFR
2011-04-01
... identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. 41.32 Section 41.32 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE... crossing identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. (a...
Code of Federal Regulations, 2012 CFR
2012-04-01
... identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. 41.32 Section 41.32 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE... crossing identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. (a...
Leshchiner, Elizaveta S; Rush, Jason S; Durney, Michael A; Cao, Zhifang; Dančík, Vlado; Chittick, Benjamin; Wu, Huixian; Petrone, Adam; Bittker, Joshua A; Phillips, Andrew; Perez, Jose R; Shamji, Alykhan F; Kaushik, Virendar K; Daly, Mark J; Graham, Daniel B; Schreiber, Stuart L; Xavier, Ramnik J
2017-10-24
Advances in human genetics have dramatically expanded our understanding of complex heritable diseases. Genome-wide association studies have identified an allelic series of CARD9 variants associated with increased risk of or protection from inflammatory bowel disease (IBD). The predisposing variant of CARD9 is associated with increased NF-κB-mediated cytokine production. Conversely, the protective variant lacks a functional C-terminal domain and is unable to recruit the E3 ubiquitin ligase TRIM62. Here, we used biochemical insights into CARD9 variant proteins to create a blueprint for IBD therapeutics and recapitulated the mechanism of the CARD9 protective variant using small molecules. We developed a multiplexed bead-based technology to screen compounds for disruption of the CARD9-TRIM62 interaction. We identified compounds that directly and selectively bind CARD9, disrupt TRIM62 recruitment, inhibit TRIM62-mediated ubiquitinylation of CARD9, and demonstrate cellular activity and selectivity in CARD9-dependent pathways. Taken together, small molecules targeting CARD9 illustrate a path toward improved IBD therapeutics. Published under the PNAS license.
Rappaport, Noa; Fishilevich, Simon; Nudel, Ron; Twik, Michal; Belinky, Frida; Plaschkes, Inbar; Stein, Tsippi Iny; Cohen, Dana; Oz-Levi, Danit; Safran, Marilyn; Lancet, Doron
2017-08-18
A key challenge in the realm of human disease research is next generation sequencing (NGS) interpretation, whereby identified filtered variant-harboring genes are associated with a patient's disease phenotypes. This necessitates bioinformatics tools linked to comprehensive knowledgebases. The GeneCards suite databases, which include GeneCards (human genes), MalaCards (human diseases) and PathCards (human pathways) together with additional tools, are presented with the focus on MalaCards utility for NGS interpretation as well as for large scale bioinformatic analyses. VarElect, our NGS interpretation tool, leverages the broad information in the GeneCards suite databases. MalaCards algorithms unify disease-related terms and annotations from 69 sources. Further, MalaCards defines hierarchical relatedness-aliases, disease families, a related diseases network, categories and ontological classifications. GeneCards and MalaCards delineate and share a multi-tiered, scored gene-disease network, with stringency levels, including the definition of elite status-high quality gene-disease pairs, coming from manually curated trustworthy sources, that includes 4500 genes for 8000 diseases. This unique resource is key to NGS interpretation by VarElect. VarElect, a comprehensive search tool that helps infer both direct and indirect links between genes and user-supplied disease/phenotype terms, is robustly strengthened by the information found in MalaCards. The indirect mode benefits from GeneCards' diverse gene-to-gene relationships, including SuperPaths-integrated biological pathways from 12 information sources. We are currently adding an important information layer in the form of "disease SuperPaths", generated from the gene-disease matrix by an algorithm similar to that previously employed for biological pathway unification. This allows the discovery of novel gene-disease and disease-disease relationships. The advent of whole genome sequencing necessitates capacities to go beyond protein coding genes. GeneCards is highly useful in this respect, as it also addresses 101,976 non-protein-coding RNA genes. In a more recent development, we are currently adding an inclusive map of regulatory elements and their inferred target genes, generated by integration from 4 resources. MalaCards provides a rich big-data scaffold for in silico biomedical discovery within the gene-disease universe. VarElect, which depends significantly on both GeneCards and MalaCards power, is a potent tool for supporting the interpretation of wet-lab experiments, notably NGS analyses of disease. The GeneCards suite has thus transcended its 2-decade role in biomedical research, maturing into a key player in clinical investigation.
Healthy Home Action Card (English)
Brief tips to save energy, save money, protect inhabitants, and make your home more environmentally-friendly. Topics include mold, radon, carbon monoxide, asthma, secondhand smoke, indoor air pollution, water safety, lead, and pest control.
Locomotion of a bioinspired flyer powered by one pair of pitching foils
NASA Astrophysics Data System (ADS)
Zhang, Xiang; He, Guowei; Wang, Shizhao; Zhang, Xing
2018-01-01
We numerically investigate the flight dynamics and aerodynamics of a two-dimensional model for the jellyfishlike ornithopter recently devised by Ristroph and Childress [L. Ristroph and S. Childress, J. R. Soc. Interface 11, 20130992 (2014), 10.1098/rsif.2013.0992]. This simplified model is composed of two rigid thin foils which are forced to pitch in antiphase fashion. The Navier-Stokes equations for the fluid and the dynamics equations for the flyer are solved together in the simulations. We first consider the constrained-flying condition where the flyer model is only allowed to move in the vertical direction. The influences of the control parameters on the hovering performance are studied. With the variations in parameter values, three different locomotion states, i.e., ascending, descending, and approximate hovering, are identified. The wake structures corresponding to these three locomotion states are explored. It is found that the approximate hovering state cannot persist due to the occurrence of wake symmetry breaking after long-time simulation. We then consider the free-flying condition where the motions in three degrees of freedom are allowed. We study the postural stability of a flyer, with its center of gravity located at the geometric center. The responses of the flyer at different locomotion states to physical and numerical perturbations are examined. Our results show that the ascending state is recoverable after the perturbation. The descending state is irrecoverable after the perturbation and a mixed fluttering and tumbling motion which resembles that of a falling card emerges. The approximate hovering state is also irrecoverable and it eventually transits to the ascending state after the perturbation. The research sheds light on the lift-producing mechanism and stability of the flyer and the results are helpful in guiding the design and optimization of the jellyfishlike flying machine.
Loading, electromyograph, and motion during exercise
NASA Technical Reports Server (NTRS)
Figueroa, Fernando
1993-01-01
A system is being developed to gather kineto-dynamic data for a study to determine the load vectors applied to bone during exercise on equipment similar to that used in space. This information will quantify bone loading for exercise countermeasures development. Decreased muscle loading and external loading of bone during weightlessness results in cancellous bone loss of 1 percent per month in the lower extremities and 2 percent per month in the calcaneous. It is hypothesized that loading bone appropriately during exercise may prevent the bone loss. The system consists of an ergometer instrumented to provide position of the pedal (foot), pedaling forces on the foot (on the sagittal plane), and force on the seat. Accelerometers attached to the limbs will provide acceleration. These data will be used as input to an analytical model of the limb to determine forces on the bones and on groups of muscles. EMG signals from activity in the muscles will also be used in conjunction with the equations of mechanics of motion to be able to discern forces exerted by specific muscles. The tasks to be carried out include: design of various mechanical components to mount transducers, specification of mechanical components, specification of position transducers, development of a scheme to control the data acquisition instruments (TEAC recorder and optical encoder board), development of a dynamic model of the limbs in motion, and development of an overall scheme for data collection analysis and presentation. At the present time, all the hardware components of the system are operational, except for a computer board to gather position data from the pedals and crank. This board, however, may be put to use by anyone with background in computer based instrumentation. The software components are not all done. Software to transfer data recorded from the EMG measurements is operational, software to drive the optical encoder card is mostly done. The equations to model the kinematics and dynamics of motion of the limbs have been developed, but they have not yet been implemented in software. Aside from the development of the hardware and software components of the system, the methodology to use accelerometers and encoders and the formulation of the appropriate equations are an important contribution to the area of biomechanics, particularly in space applications.
Sex of respondent and credit attitudes as predictors of credit card use and debt payment.
McCall, Michael; Eckrich, Donald W
2006-06-01
Researchers have suggested there may be sex differences in attitudes towards credit card possession and use. Undergraduates, 41 men and 41 women, completed a survey regarding their attitudes towards credit, credit card use, and repayment. Analysis indicated sex played a significant moderating role between number of credit cards used and the importance of paying off monthly balances. Women possessed more credit cards than men and engaged in more frequent shopping. Number of credit cards increased with paying off of monthly balances. Data are discussed in terms of the importance of managing credit card debt in an increasingly cashless society.
Serious gaming technology in major incident triage training: a pragmatic controlled trial.
Knight, James F; Carley, Simon; Tregunna, Bryan; Jarvis, Steve; Smithies, Richard; de Freitas, Sara; Dunwell, Ian; Mackway-Jones, Kevin
2010-09-01
By exploiting video games technology, serious games strive to deliver affordable, accessible and usable interactive virtual worlds, supporting applications in training, education, marketing and design. The aim of the present study was to evaluate the effectiveness of such a serious game in the teaching of major incident triage by comparing it with traditional training methods. Pragmatic controlled trial. During Major Incident Medical Management and Support Courses, 91 learners were randomly distributed into one of two training groups: 44 participants practiced triage sieve protocol using a card-sort exercise, whilst the remaining 47 participants used a serious game. Following the training sessions, each participant undertook an evaluation exercise, whereby they were required to triage eight casualties in a simulated live exercise. Performance was assessed in terms of tagging accuracy (assigning the correct triage tag to the casualty), step accuracy (following correct procedure) and time taken to triage all casualties. Additionally, the usability of both the card-sort exercise and video game were measured using a questionnaire. Tagging accuracy by participants who underwent the serious game training was significantly higher than those who undertook the card-sort exercise [Chi2=13.126, p=0.02]. Step accuracy was also higher in the serious game group but only for the numbers of participants that followed correct procedure when triaging all eight casualties [Chi2=5.45, p=0.0196]. There was no significant difference in time to triage all casualties (card-sort=435+/-74 s vs video game=456+/-62 s, p=0.155). Serious game technologies offer the potential to enhance learning and improve subsequent performance when compared to traditional educational methods. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.
Victorian era esthetic and restorative dentistry: an advertising trade card gallery.
Croll, Theodore P; Swanson, Ben Z
2006-01-01
A chief means of print advertising in the Victorian era was the "trade card." Innumerable products, companies, and services were highlighted on colorful chromolithographic trade cards, and these became desirable collectible objects which were pasted into scrapbooks and enjoyed by many families. Dentistry- and oral health-related subjects were often depicted on Victorian trade cards, and esthetic and restorative dentistry themes were featured. This review describes the history of advertising trade cards and offers a photographic gallery of dentistry-related cards of the era.
Kenerson, Donna; Fadeyi, Saudat; Liu, Jianguo; Weriwoh, Mirabel; Beard, Katina; Hargreaves, Margaret K
2017-12-01
The enrollment of African American women into cancer prevention trials (CPTs) continues to be low despite their higher cancer mortality rates. Clinical trials are vital to the discovery of new prevention, diagnostic, and treatment methods that improve cancer outcomes. This study addressed attitudes and beliefs associated with the sub optimal participation of African American women in CPTs through the development and pretesting of an educational tool. The use of community-engaged research (CER) in the formative phase of this study was the basis for developing an audio-card. Cultural and linguistic elements were incorporated into the tool's audio and written messages, and visual images highlighted the importance of CPT participation among African American women. The CPT beliefs and behavioral intent of 30 African American women who received information from the audio-card were compared with 30 controls. Findings indicated statistically significant differences at posttest between the control and treatment groups in personal value (p = .03), social influence (p = .03), and personal barriers (p = .0001); personal barriers in the pretest group also demonstrated significant differences (p = .009). Consideration of cultural context and language needs of populations are vital to the development and design of effective health promoting tools.
Banu Rekha, V V; Jagarajamma, K; Wares, F; Chandrasekaran, V; Swaminathan, S
2009-12-01
India's Revised National Tuberculosis Control Programme (RNTCP) recommends screening of all household contacts of smear-positive pulmonary tuberculosis (PTB) cases for tuberculosis (TB) disease, and 6-month isoniazid preventive therapy (IPT) for asymptomatic children aged <6 years. To assess the implementation of child contact screening and IPT administration under the RNTCP. A cross-sectional study conducted in four randomly selected TB units (TUs), two in an urban (Chennai City) and two in a rural (Vellore District) area of Tamil Nadu, South India, from July to September 2008. The study involved the perusal of TB treatment cards of source cases (new or retreatment smear-positive PTB patients started on treatment), interview of source cases and focus group discussions (FGDs) among health care workers. Interviews of 253 PTB patients revealed that of 220 contacts aged <14 years, only 31 (14%) had been screened for TB, and that of 84 household children aged <6 years, only 16 (19%) had been initiated on IPT. The treatment cards of source cases lacked documentation of contact details. FGDs revealed greater TB awareness among urban health care workers, but a lack of detailed knowledge about procedures. Provision for documentation using a separate IPT card and focused training may help improve the implementation of contact screening and IPT.
EuCARD 2010: European coordination of accelerator research and development
NASA Astrophysics Data System (ADS)
Romaniuk, Ryszard S.
2010-09-01
Accelerators are basic tools of the experimental physics of elementary particles, nuclear physics, light sources of the fourth generation. They are also used in myriad other applications in research, industry and medicine. For example, there are intensely developed transmutation techniques for nuclear waste from nuclear power and atomic industries. The European Union invests in the development of accelerator infrastructures inside the framework programs to build the European Research Area. The aim is to build new accelerator research infrastructures, develop the existing ones, and generally make the infrastructures more available to competent users. The paper summarizes the first year of activities of the EU FP7 Project Capacities EuCARD -European Coordination of Accelerator R&D. EuCARD is a common venture of 37 European Accelerator Laboratories, Institutes, Universities and Industrial Partners involved in accelerator sciences and technologies. The project, initiated by ESGARD, is an Integrating Activity co-funded by the European Commission under Framework Program 7 - Capacities for a duration of four years, starting April 1st, 2009. Several teams from this country participate actively in this project. The contribution from Polish research teams concerns: photonic and electronic measurement - control systems, RF-gun co-design, thin-film superconducting technology, superconducting transport infrastructures, photon and particle beam measurements and control.
Harvey, R; Foulds, L; Housden, T; Bennett, K A; Falzon, D; McNarry, A F; Graham, C
2017-03-01
Significant benefits have been demonstrated with the use of peri-operative checklists. We assessed whether a read-aloud didactic action card would improve performance of cannula cricothyroidotomy in a simulated 'can't intubate, can't oxygenate' scenario. A 17-step action card was devised by an expert panel. Participants in their first 4 years of anaesthetic training were randomly assigned into 'no-card' or 'card' groups. Scenarios were video-recorded for analysis. Fifty-three participants (27 no-card and 26 card) completed the scenario. The number of steps omitted was mean (SD) 6.7 (2.0) in the no-card group vs. 0.3 (0.5); p < 0.001 in the card group, but the no-card group was faster to oxygenation by mean (95% CI) 35.4 (6.6-64.2) s. The Kappa statistic was 0.84 (0.73-0.95). Our study demonstrated that action cards are beneficial in achieving successful front-of-neck access using a cannula cricothyroidotomy technique. Further investigation is required to determine this tool's effectiveness in other front-of-neck access situations, and its role in teaching or clinical management. © 2016 The Association of Anaesthetists of Great Britain and Ireland.
Personal medical information system using laser card
NASA Astrophysics Data System (ADS)
Cho, Seong H.; Kim, Keun Ho; Choi, Hyung-Sik; Park, Hyun Wook
1996-04-01
The well-known hospital information system (HIS) and the picture archiving and communication system (PACS) are typical applications of multimedia to medical area. This paper proposes a personal medical information save-and-carry system using a laser card. This laser card is very useful, especially in emergency situations, because the medical information in the laser card can be read at anytime and anywhere if there exists a laser card reader/writer. The contents of the laser card include the clinical histories of a patient such as clinical chart, exam result, diagnostic reports, images, and so on. The purpose of this system is not a primary diagnosis, but emergency reference of clinical history of the patient. This personal medical information system consists of a personal computer integrated with laser card reader/writer, color frame grabber, color CCD camera and a high resolution image scanner optionally. Window-based graphical user interface was designed for easy use. The laser card has relatively sufficient capacity to store the personal medical information, and has fast access speed to restore and load the data with a portable size as compact as a credit card. Database items of laser card provide the doctors with medical data such as laser card information, patient information, clinical information, and diagnostic result information.
12 CFR 334.91 - Duties of card issuers regarding changes of address.
Code of Federal Regulations, 2010 CFR
2010-01-01
... STATEMENTS OF GENERAL POLICY FAIR CREDIT REPORTING Identity Theft Red Flags § 334.91 Duties of card issuers regarding changes of address. (a) Scope. This section applies to an issuer of a debit or credit card (card... been issued a credit or debit card. (2) Clear and conspicuous means reasonably understandable and...
12 CFR 41.91 - Duties of card issuers regarding changes of address.
Code of Federal Regulations, 2010 CFR
2010-01-01
... FAIR CREDIT REPORTING Identity Theft Red Flags § 41.91 Duties of card issuers regarding changes of address. (a) Scope. This section applies to an issuer of a debit or credit card (card issuer) that is a... means a consumer who has been issued a credit or debit card. (2) Clear and conspicuous means reasonably...
31 CFR 548.409 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... SANCTIONS REGULATIONS Interpretations § 548.409 Credit extended and cards issued by U.S. financial..., charge cards, debit cards, or other credit facilities issued by a U.S. financial institution to a person...
41 CFR 109-38.801 - Obtaining SF 149, U.S. Government National Credit Card.
Code of Federal Regulations, 2010 CFR
2010-07-01
.... Government National Credit Card. 109-38.801 Section 109-38.801 Public Contracts and Property Management..., U.S. Government National Credit Card § 109-38.801 Obtaining SF 149, U.S. Government National Credit Card. DOE offices electing to use national credit cards shall request the assignment of billing address...
31 CFR 588.409 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... BALKANS STABILIZATION REGULATIONS Interpretations § 588.409 Credit extended and cards issued by U.S... not limited to, charge cards, debit cards, or other credit facilities issued by a U.S. financial...
31 CFR 598.409 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... NARCOTICS KINGPIN SANCTIONS REGULATIONS Interpretations § 598.409 Credit extended and cards issued by U.S... existing credit agreements, including, but not limited to, charge cards, debit cards, or other credit...
31 CFR 593.409 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... LIBERIAN REGIME OF CHARLES TAYLOR SANCTIONS REGULATIONS Interpretations § 593.409 Credit extended and cards..., including, but not limited to, charge cards, debit cards, or other credit facilities issued by a U.S...
37 CFR 2.207 - Methods of payment.
Code of Federal Regulations, 2010 CFR
2010-07-01
... credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process the charge... fees to a credit card. If credit card information is provided on a form or document other than a form...
12 CFR 717.91 - Duties of card issuers regarding changes of address.
Code of Federal Regulations, 2010 CFR
2010-01-01
... AFFECTING CREDIT UNIONS FAIR CREDIT REPORTING Identity Theft Red Flags § 717.91 Duties of card issuers regarding changes of address. (a) Scope. This section applies to an issuer of a debit or credit card (card... means a member who has been issued a credit or debit card. (2) Clear and conspicuous means reasonably...
31 CFR 594.410 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... TERRORISM SANCTIONS REGULATIONS Interpretations § 594.410 Credit extended and cards issued by U.S. financial... agreements, including, but not limited to, charge cards, debit cards, or other credit facilities issued by a...
31 CFR 542.409 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... SANCTIONS REGULATIONS Interpretations § 542.409 Credit extended and cards issued by U.S. financial..., charge cards, debit cards, or other credit facilities issued by a U.S. financial institution to a person...
12 CFR 571.91 - Duties of card issuers regarding changes of address.
Code of Federal Regulations, 2010 CFR
2010-01-01
... FAIR CREDIT REPORTING Identity Theft Red Flags § 571.91 Duties of card issuers regarding changes of address. (a) Scope. This section applies to an issuer of a debit or credit card (card issuer) that is a... consumer who has been issued a credit or debit card. (2) Clear and conspicuous means reasonably...
31 CFR 547.409 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... DEMOCRATIC REPUBLIC OF THE CONGO SANCTIONS REGULATIONS Interpretations § 547.409 Credit extended and cards..., including, but not limited to, charge cards, debit cards, or other credit facilities issued by a U.S...
31 CFR 536.409 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... NARCOTICS TRAFFICKING SANCTIONS REGULATIONS Interpretations § 536.409 Credit extended and cards issued by U... any existing credit agreements, including, but not limited to, charge cards, debit cards, or other...
The "Negative" Credit Card Effect: Credit Cards as Spending-Limiting Stimuli in New Zealand
ERIC Educational Resources Information Center
Lie, Celia; Hunt, Maree; Peters, Heather L.; Veliu, Bahrie; Harper, David
2010-01-01
The "credit card effect" describes a finding where greater value is given to consumer items if credit card logos are present. One explanation for the effect is that credit cards elicit spending behavior through associative learning. If this is true, social, economic and historical contexts should alter this effect. In Experiment 1, Year…
Vibration Damping Circuit Card Assembly
NASA Technical Reports Server (NTRS)
Hunt, Ronald Allen (Inventor)
2016-01-01
A vibration damping circuit card assembly includes a populated circuit card having a mass M. A closed metal container is coupled to a surface of the populated circuit card at approximately a geometric center of the populated circuit card. Tungsten balls fill approximately 90% of the metal container with a collective mass of the tungsten balls being approximately (0.07) M.
37 CFR 2.207 - Methods of payment.
Code of Federal Regulations, 2014 CFR
2014-07-01
... credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process the charge... fees to a credit card. If credit card information is provided on a form or document other than a form...
41 CFR 109-38.801 - Obtaining SF 149, U.S. Government National Credit Card.
Code of Federal Regulations, 2011 CFR
2011-01-01
.... Government National Credit Card. 109-38.801 Section 109-38.801 Public Contracts and Property Management..., U.S. Government National Credit Card § 109-38.801 Obtaining SF 149, U.S. Government National Credit Card. DOE offices electing to use national credit cards shall request the assignment of billing address...
41 CFR 109-38.801 - Obtaining SF 149, U.S. Government National Credit Card.
Code of Federal Regulations, 2012 CFR
2012-01-01
.... Government National Credit Card. 109-38.801 Section 109-38.801 Public Contracts and Property Management..., U.S. Government National Credit Card § 109-38.801 Obtaining SF 149, U.S. Government National Credit Card. DOE offices electing to use national credit cards shall request the assignment of billing address...
41 CFR 109-38.801 - Obtaining SF 149, U.S. Government National Credit Card.
Code of Federal Regulations, 2013 CFR
2013-07-01
.... Government National Credit Card. 109-38.801 Section 109-38.801 Public Contracts and Property Management..., U.S. Government National Credit Card § 109-38.801 Obtaining SF 149, U.S. Government National Credit Card. DOE offices electing to use national credit cards shall request the assignment of billing address...
12 CFR Rules for Card Issuers That... - by-Transaction Basis
Code of Federal Regulations, 2013 CFR
2013-01-01
... Credit Card Accounts and Open-End Credit Offered to College Students Reevaluation of rate increases. Pt... provisions of Subpart B apply if credit cards are issued and the card issuer and the seller are the same or... creditor have an agreement authorizing the seller to honor the creditor's credit card. 1. Section 226.6(a...
41 CFR 109-38.801 - Obtaining SF 149, U.S. Government National Credit Card.
Code of Federal Regulations, 2014 CFR
2014-01-01
.... Government National Credit Card. 109-38.801 Section 109-38.801 Public Contracts and Property Management..., U.S. Government National Credit Card § 109-38.801 Obtaining SF 149, U.S. Government National Credit Card. DOE offices electing to use national credit cards shall request the assignment of billing address...
37 CFR 2.207 - Methods of payment.
Code of Federal Regulations, 2011 CFR
2011-07-01
... credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process the charge... fees to a credit card. If credit card information is provided on a form or document other than a form...
37 CFR 2.207 - Methods of payment.
Code of Federal Regulations, 2013 CFR
2013-07-01
... credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process the charge... fees to a credit card. If credit card information is provided on a form or document other than a form...
Analysis of OPACITY and PLAID Protocols for Contactless Smart Cards
2012-09-01
9 3. Access Control ........................................................................ 9 E . THREATS AND...Synchronization .............................. 23 c. Simple Integration and Interoperability ..................... 24 E . MODES OF OPERATION...Interoperability ..................... 47 E . MODES OF OPERATIONS ................................................................ 47 F. SUGGESTED KEY
User`s manual for the CDC-1 digitizer controller
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ferron, J.R.
1994-09-01
A detailed description of how to use the CDC-1 digitizer controller is given. The CDC-1 is used with the CAMAC format digitizer models in the TRAQ series (manufactured by DSP Technology Inc.), the DAD-1 data acquisition daughter board, and the Intel i860-based SuperCard-2 (manufactured, by CSP Inc.) to form a high speed data acquisition and real time analysis system. Data can be transferred to the memory on the SuperCard-2 at a rate as high as 40 million 14-bit samples per second. Depending on the model of TRAQ digitizer in use, digitizing rates up to 3.33 MHz are supported (with eightmore » data channels), or, for instance, at a sample rate of 100 kHz, 384 data channels can be acquired.« less
SD-4060OCPLT4 program, user's guide
NASA Technical Reports Server (NTRS)
Glazer, J.
1973-01-01
A brief description of the Orbit Comparison Plot (OCPLT4) program is presented, along with user information and a source program listing. In addition to correcting several errors that existed in the original program, this program incorporates the following new features: (1) For any satellite whose observations are processed by the Definitive Orbit Determination System (DODS), the orbital uncertainty estimates (OUE) can be obtained via appropriate card input with no major modification to the program. (2) All satellite-related information (e.g., plotter scales, cutoff limits, plotting frequencies) is user controlled via card input. (3) Not all components of OUE must be obtained. The user has the option of obtaining only the radial component if there is no need for the other two components. (4) The altitude and time graph formats are controlled by the user and are not stored for specific satellites.
FPGA for Power Control of MSL Avionics
NASA Technical Reports Server (NTRS)
Wang, Duo; Burke, Gary R.
2011-01-01
A PLGT FPGA (Field Programmable Gate Array) is included in the LCC (Load Control Card), GID (Guidance Interface & Drivers), TMC (Telemetry Multiplexer Card), and PFC (Pyro Firing Card) boards of the Mars Science Laboratory (MSL) spacecraft. (PLGT stands for PFC, LCC, GID, and TMC.) It provides the interface between the backside bus and the power drivers on these boards. The LCC drives power switches to switch power loads, and also relays. The GID drives the thrusters and latch valves, as well as having the star-tracker and Sun-sensor interface. The PFC drives pyros, and the TMC receives digital and analog telemetry. The FPGA is implemented both in Xilinx (Spartan 3- 400) and in Actel (RTSX72SU, ASX72S). The Xilinx Spartan 3 part is used for the breadboard, the Actel ASX part is used for the EM (Engineer Module), and the pin-compatible, radiation-hardened RTSX part is used for final EM and flight. The MSL spacecraft uses a FC (Flight Computer) to control power loads, relays, thrusters, latch valves, Sun-sensor, and star-tracker, and to read telemetry such as temperature. Commands are sent over a 1553 bus to the MREU (Multi-Mission System Architecture Platform Remote Engineering Unit). The MREU resends over a remote serial command bus c-bus to the LCC, GID TMC, and PFC. The MREU also sends out telemetry addresses via a remote serial telemetry address bus to the LCC, GID, TMC, and PFC, and the status is returned over the remote serial telemetry data bus.
NASA Astrophysics Data System (ADS)
Mueanploy, Wannapa
2015-06-01
The objective of this research was to offer the way to improve engineering students in Physics topic of vector product. The sampling of this research was the engineering students at Pathumwan Institute of Technology during the first semester of academic year 2013. 1) Select 120 students by random sampling are asked to fill in a satisfaction questionnaire scale, to select size of three dimensions vector card in order to apply in the classroom. 2) Select 60 students by random sampling to do achievement test and take the test to be used in the classroom. The methods used in analysis of achievement test by the Kuder-Richardson Method (KR- 20). The results show that 12 items of achievement test are appropriate to be applied in the classroom. The achievement test gets Difficulty (P) = 0.40-0.67, Discrimination = 0.33-0.73 and Reliability (r) = 0.70.The experimental in the classroom. 3) Select 60 students by random sampling divide into two groups; group one (the controlled group) with 30 students was chosen to study in the vector product lesson by the regular teaching method. Group two (the experimental group) with 30 students was chosen to learn the vector product lesson with three dimensions vector card. 4) Analyzed data between the controlled group and the experimental group, the result showed that experimental group got higher achievement test than the controlled group significant at .01 level.
Swamydas, Muthulekha; Rodriguez, Carlos A.; Lim, Jean K.; Mendez, Laura M.; Fink, Danielle L.; Hsu, Amy P.; Zhai, Bing; Karauzum, Hatice; Mikelis, Constantinos M.; Rose, Stacey R.; Ferre, Elise M. N.; Yockey, Lynne; Lemberg, Kimberly; Kuehn, Hye Sun; Rosenzweig, Sergio D.; Lin, Xin; Chittiboina, Prashant; Datta, Sandip K.; Belhorn, Thomas H.; Weimer, Eric T.; Hernandez, Michelle L.; Hohl, Tobias M.; Kuhns, Douglas B.; Lionakis, Michail S.
2015-01-01
Candida is the most common human fungal pathogen and causes systemic infections that require neutrophils for effective host defense. Humans deficient in the C-type lectin pathway adaptor protein CARD9 develop spontaneous fungal disease that targets the central nervous system (CNS). However, how CARD9 promotes protective antifungal immunity in the CNS remains unclear. Here, we show that a patient with CARD9 deficiency had impaired neutrophil accumulation and induction of neutrophil-recruiting CXC chemokines in the cerebrospinal fluid despite uncontrolled CNS Candida infection. We phenocopied the human susceptibility in Card9 -/- mice, which develop uncontrolled brain candidiasis with diminished neutrophil accumulation. The induction of neutrophil-recruiting CXC chemokines is significantly impaired in infected Card9 -/- brains, from both myeloid and resident glial cellular sources, whereas cell-intrinsic neutrophil chemotaxis is Card9-independent. Taken together, our data highlight the critical role of CARD9-dependent neutrophil trafficking into the CNS and provide novel insight into the CNS fungal susceptibility of CARD9-deficient humans. PMID:26679537
Effects of False Tilt Cues on the Training of Manual Roll Control Skills
NASA Technical Reports Server (NTRS)
Zaal, Peter M. T.; Popovici, Alexandru; Zavala, Melinda A.
2015-01-01
This paper describes a transfer-of-training study performed in the NASA Ames Vertica lMotion Simulator. The purpose of the study was to investigate the effect of false tilt cues on training and transfer of training of manual roll control skills. Of specific interest were the skills needed to control unstable roll dynamics of a mid-size transport aircraft close to the stall point. Nineteen general aviation pilots trained on a roll control task with one of three motion conditions: no motion, roll motion only, or reduced coordinated roll motion. All pilots transferred to full coordinated roll motion in the transfer session. A novel multimodal pilot model identification technique was successfully applied to characterize how pilots' use of visual and motion cues changed over the course of training and after transfer. Pilots who trained with uncoordinated roll motion had significantly higher performance during training and after transfer, even though they experienced the false tilt cues. Furthermore, pilot control behavior significantly changed during the two sessions, as indicated by increasing visual and motion gains, and decreasing lead time constants. Pilots training without motion showed higher learning rates after transfer to the full coordinated roll motion case.
Two sets of business card-sized lists of tips for prevention of bed bug infestations, one for general use around home, the other for travelers. Print a single card or a page of cards for distribution.
International images: business cards.
Gaston, S; Pucci, J
1991-01-01
Nursing specialists engage in a variety of international professional activities. Business cards are an important aspect of establishing a professional image. This article presents recommended business card contents, international etiquette, card design and production, and cared innovations.
British and American attitudes toward credit cards.
Yang, Bijou; James, Simon; Lester, David
2006-04-01
American university students owned more than twice as many credit cards as British university students. However, scores on a credit card attitude scale predicted the number of cards owned by respondents in both countries.
van der Ham, Alida J; Voskes, Yolande; van Kempen, Nel; Broerse, Jacqueline E W; Widdershoven, Guy A M
2013-06-01
The crisis card is a specific form of psychiatric advance directive, documenting mental clients' treatment preferences in advance of a potential psychiatric crisis. In this paper, we aim to provide insight into implementation issues surrounding the crisis card. A Dutch crisis-card project formed the scope of this study. Data were collected through interviews with 15 participants from six stakeholder groups. Identified implementation issues are: (a) The role of the crisis-card counselor, (b) lack of distribution and familiarity, (c) care professionals' routines, and (d) client readiness. The crisis-card counselor appears to play a key role in fostering benefits of the crisis card by supporting clients' perspectives. More structural integration of the crisis card in care processes may enhance its impact, but should be carefully explored. (PsycINFO Database Record (c) 2013 APA, all rights reserved).
Mitsunaga, Erin M
2006-05-01
During the Korean War, International Business Machines (IBM) punch cards were created for every individual involved in military combat. Each card contained all pertinent personal information about the individual and was utilized to keep track of all soldiers involved. However, at present, all of the information known about these punch cards reveals only their format and their significance; there is little to no information on how these cards were created or how to interpret the information contained without the aid of the computer system used during the war. Today, it is believed there is no one available to explain this computerized system, nor do the original computers exist. This decode strategy is the result of an attempt to decipher the information on these cards through the use of all available medical and dental records for each individual examined. By cross-referencing the relevant personal information with the known format of the cards, a basic guess-and-check method was utilized. After examining hundreds of IBM punch cards, however, it has become clear that the punch card method of recording information was not infallible. In some cases, there are gaps of information on cards where there are data recorded on personal records; in others, information is punched incorrectly onto the cards, perhaps as the result of a transcription error. Taken all together, it is clear that the information contained on each individual's card should be taken solely as another form of personal documentation.
[Smart card systems in health care (protection, key-functions, divided data bases, applications)].
Simon, P
1999-04-25
Barely more than 15 years have passed since electronic memory cards appeared, their popularity has grown rapidly (first of all as a cash-saving device and later for other purposes, as well). This is due also to the growing interest towards development of the intelligence of information systems for the follow-up of patients' health condition and medical care in countries with a highly developed health and insurance system (need for the creation of data bases divided for individuals) and also to their commitment towards a better control of the quality and costs of health care. We can come to the conclusion that the aim of research, development and the creation of systems in health informatics is to prevent illness and to give a direct informatic support to medical and nursing activity carried out in the patients' interests. The smart card and the surrounding application systems are certainly the appropriate means for the achievement of these aims.
ERIC Educational Resources Information Center
Porter, Dennis
One recommendation of the 1989 California Strategic Plan for Adult Education is the use of EduCard. EduCard, the Adult Education Access Card, is a means of giving learners access to information about educational opportunities and providing administrators with machine-readable information on learners' prior education and traiing. Three models are:…
Jeu de cartes or Jeu Descartes: Business Cards in a French Course for the Professions.
ERIC Educational Resources Information Center
Gegerias, Mary
This paper discusses the use of French business cards in a college-level French language and culture course for professionals. Among other assignments, students were each given a different card and asked to speak about the design of their card, the business represented, idiomatic expressions and historical allusions on the card, and the use of…
31 CFR 543.409 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U...'IVOIRE SANCTIONS REGULATIONS Interpretations § 543.409 Credit extended and cards issued by U.S. financial..., charge cards, debit cards, or other credit facilities issued by a U.S. financial institution to a person...
12 CFR 222.91 - Duties of card issuers regarding changes of address.
Code of Federal Regulations, 2010 CFR
2010-01-01
... described in § 222.90(a) that issues a debit or credit card (card issuer). (b) Definitions. For purposes of this section: (1) Cardholder means a consumer who has been issued a credit or debit card. (2) Clear and... notification of a change of address for a consumer's debit or credit card account and, within a short period of...
31 CFR 541.408 - Credit extended and cards issued by U.S. financial institutions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... ZIMBABWE SANCTIONS REGULATIONS Interpretations § 541.408 Credit extended and cards issued by U.S. financial..., charge cards, debit cards, or other credit facilities issued by a U.S. financial institution to a person...
16 CFR 681.2 - Duties of card issuers regarding changes of address.
Code of Federal Regulations, 2010 CFR
2010-01-01
... applies to a person described in § 681.1(a) that issues a debit or credit card (card issuer). (b... of address if it receives notification of a change of address for a consumer's debit or credit card... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Duties of card issuers regarding changes of...
49 CFR 375.221 - May I use a charge or credit card plan for payments?
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 5 2010-10-01 2010-10-01 false May I use a charge or credit card plan for... card plan for payments? (a) You may provide in your tariff for the acceptance of charge or credit cards for the payment of freight charges. Accepting charge or credit card payments is different than...
49 CFR 375.221 - May I use a charge or credit card plan for payments?
Code of Federal Regulations, 2013 CFR
2013-10-01
... 49 Transportation 5 2013-10-01 2013-10-01 false May I use a charge or credit card plan for... card plan for payments? (a) You may provide in your tariff for the acceptance of charge or credit cards for the payment of freight charges. Accepting charge or credit card payments is different than...
49 CFR 375.221 - May I use a charge or credit card plan for payments?
Code of Federal Regulations, 2012 CFR
2012-10-01
... 49 Transportation 5 2012-10-01 2012-10-01 false May I use a charge or credit card plan for... card plan for payments? (a) You may provide in your tariff for the acceptance of charge or credit cards for the payment of freight charges. Accepting charge or credit card payments is different than...
49 CFR 375.221 - May I use a charge or credit card plan for payments?
Code of Federal Regulations, 2014 CFR
2014-10-01
... 49 Transportation 5 2014-10-01 2014-10-01 false May I use a charge or credit card plan for... card plan for payments? (a) You may provide in your tariff for the acceptance of charge or credit cards for the payment of freight charges. Accepting charge or credit card payments is different than...
49 CFR 375.221 - May I use a charge or credit card plan for payments?
Code of Federal Regulations, 2011 CFR
2011-10-01
... 49 Transportation 5 2011-10-01 2011-10-01 false May I use a charge or credit card plan for... card plan for payments? (a) You may provide in your tariff for the acceptance of charge or credit cards for the payment of freight charges. Accepting charge or credit card payments is different than...
Integrating Fingerprint Verification into the Smart Card-Based Healthcare Information System
NASA Astrophysics Data System (ADS)
Moon, Daesung; Chung, Yongwha; Pan, Sung Bum; Park, Jin-Won
2009-12-01
As VLSI technology has been improved, a smart card employing 32-bit processors has been released, and more personal information such as medical, financial data can be stored in the card. Thus, it becomes important to protect personal information stored in the card. Verification of the card holder's identity using a fingerprint has advantages over the present practices of Personal Identification Numbers (PINs) and passwords. However, the computational workload of fingerprint verification is much heavier than that of the typical PIN-based solution. In this paper, we consider three strategies to implement fingerprint verification in a smart card environment and how to distribute the modules of fingerprint verification between the smart card and the card reader. We first evaluate the number of instructions of each step of a typical fingerprint verification algorithm, and estimate the execution time of several cryptographic algorithms to guarantee the security/privacy of the fingerprint data transmitted in the smart card with the client-server environment. Based on the evaluation results, we analyze each scenario with respect to the security level and the real-time execution requirements in order to implement fingerprint verification in the smart card with the client-server environment.
MalaCards: an integrated compendium for diseases and their annotation
Rappaport, Noa; Nativ, Noam; Stelzer, Gil; Twik, Michal; Guan-Golan, Yaron; Iny Stein, Tsippi; Bahir, Iris; Belinky, Frida; Morrey, C. Paul; Safran, Marilyn; Lancet, Doron
2013-01-01
Comprehensive disease classification, integration and annotation are crucial for biomedical discovery. At present, disease compilation is incomplete, heterogeneous and often lacking systematic inquiry mechanisms. We introduce MalaCards, an integrated database of human maladies and their annotations, modeled on the architecture and strategy of the GeneCards database of human genes. MalaCards mines and merges 44 data sources to generate a computerized card for each of 16 919 human diseases. Each MalaCard contains disease-specific prioritized annotations, as well as inter-disease connections, empowered by the GeneCards relational database, its searches and GeneDecks set analyses. First, we generate a disease list from 15 ranked sources, using disease-name unification heuristics. Next, we use four schemes to populate MalaCards sections: (i) directly interrogating disease resources, to establish integrated disease names, synonyms, summaries, drugs/therapeutics, clinical features, genetic tests and anatomical context; (ii) searching GeneCards for related publications, and for associated genes with corresponding relevance scores; (iii) analyzing disease-associated gene sets in GeneDecks to yield affiliated pathways, phenotypes, compounds and GO terms, sorted by a composite relevance score and presented with GeneCards links; and (iv) searching within MalaCards itself, e.g. for additional related diseases and anatomical context. The latter forms the basis for the construction of a disease network, based on shared MalaCards annotations, embodying associations based on etiology, clinical features and clinical conditions. This broadly disposed network has a power-law degree distribution, suggesting that this might be an inherent property of such networks. Work in progress includes hierarchical malady classification, ontological mapping and disease set analyses, striving to make MalaCards an even more effective tool for biomedical research. Database URL: http://www.malacards.org/ PMID:23584832
Factors Determining Availability, Utilization and Retention of Child Health Card in Western Nepal.
Paudel, K P; Bajracharya, D C; Karki, K; K C, A
2016-05-01
The immunization card is revised with addition of general information about child health and is later called as child health card. This card is a tool used by Health Management Information System in Nepal. It is important for tracking the records of immunization. Aim is to identify the factors determining the availability, utilization and retention of the child health card in Western Nepal. A cross sectional study was conducted among mothers having children < 24 months old from Gorkha (Western Hill) and Nawalparasi (Western Terai) districts. The sample size for the study was 600 and systematic random sampling was used to select the mothers having less than 24 months old children. Data entry and analysis was done by using SPSS. Qualitative data was analyzed by making matrix. The average age of respondents was 24 years. The majority of respondents have gained higher level education. Retention of the card was found to be 82.2%. 90.3% retention was seen among 0-12 months children age group whereas it was 74 % among12 to 24 months age group. The reasons for less retention were torn by the child/played by child (54.6%) followed by lack of proper place,unaware about importance and poor quality of card.The new child health cards were insufficient, compelling use of both new and old cards which created problem in consistency. Regarding utilization of child health card, it was found to be used for birth registration and for further studies in abroad. The areas of utilization of child health card should be broadened so that the retention of card can be increased. The main reasons for less retention of the card are torn by children and lack of the proper place.
19. SECOND FLOOR, CARDING MACHINE, BY 'CARDING SPECIALISTS, CO., LTD., ...
19. SECOND FLOOR, CARDING MACHINE, BY 'CARDING SPECIALISTS, CO., LTD., PELLON LAND WORKS, HALIFAX, ENGLAND, SN #M2983 14 (EST. DATE 1940'S+). - Bamberg Cotton Mill, Main Street, Bamberg, Bamberg County, SC
NASA Technical Reports Server (NTRS)
Hill, R. W.
1994-01-01
The integration of CLIPS into HyperCard combines the intuitive, interactive user interface of the Macintosh with the powerful symbolic computation of an expert system interpreter. HyperCard is an excellent environment for quickly developing the front end of an application with buttons, dialogs, and pictures, while the CLIPS interpreter provides a powerful inference engine for complex problem solving and analysis. In order to understand the benefit of integrating HyperCard and CLIPS, consider the following: HyperCard is an information storage and retrieval system which exploits the use of the graphics and user interface capabilities of the Apple Macintosh computer. The user can easily define buttons, dialog boxes, information templates, pictures, and graphic displays through the use of the HyperCard tools and scripting language. What is generally lacking in this environment is a powerful reasoning engine for complex problem solving, and this is where CLIPS plays a role. CLIPS 5.0 (C Language Integrated Production System, v5.0) was developed at the Johnson Space Center Software Technology Branch to allow artificial intelligence research, development, and delivery on conventional computers. CLIPS 5.0 supports forward chaining rule systems, object-oriented language, and procedural programming for the construction of expert systems. It features incremental reset, seven conflict resolution stategies, truth maintenance, and user-defined external functions. Since CLIPS is implemented in the C language it is highly portable; in addition, it is embeddable as a callable routine from a program written in another language such as Ada or Fortran. By integrating HyperCard and CLIPS the advantages and uses of both packages are made available for a wide range of applications: rapid prototyping of knowledge-based expert systems, interactive simulations of physical systems and intelligent control of hypertext processes, to name a few. HyperCLIPS 2.0 is written in C-Language (54%) and Pascal (46%) for Apple Macintosh computers running Macintosh System 6.0.2 or greater. HyperCLIPS requires HyperCard 1.2 or higher and at least 2Mb of RAM are recommended to run. An executable is provided. To compile the source code, the Macintosh Programmer's Workshop (MPW) version 3.0, CLIPS 5.0 (MSC-21927), and the MPW C-Language compiler are also required. NOTE: Installing this program under Macintosh System 7 requires HyperCard v2.1. This program is distributed on a 3.5 inch Macintosh format diskette. A copy of the program documentation is included on the diskette, but may be purchased separately. HyperCLIPS was developed in 1990 and version 2.0 was released in 1991. HyperCLIPS is a copyrighted work with all copyright vested in NASA. Apple, Macintosh, MPW, and HyperCard are registered trademarks of Apple Computer, Inc.
The effect of autogenic training and biofeedback on motion sickness tolerance.
Jozsvai, E E; Pigeau, R A
1996-10-01
Motion sickness is characterized by symptoms of vomiting, drowsiness, fatigue and idiosyncratic changes in autonomic nervous system (ANS) responses such as heart rate (HR) and skin temperature (ST). Previous studies found that symptoms of motion sickness are controllable through self-regulation of ANS responses and the best method to teach such control is autogenic-feedback (biofeedback) training. Recent experiments indicated that biofeedback training is ineffective in reducing symptoms of motion sickness or in increasing tolerance to motion. If biofeedback facilitates learning of ANS self-regulation then autogenic training with true feedback (TFB) should lead to better control over ANS responses and better motion tolerance than autogenic training with false feedback (FFB). If there is a relationship between ANS self-regulation and coping with motion stress, a significant correlation should be found between amounts of control over ANS responses and measures of motion tolerance and/or symptoms of motion sickness. There were 3 groups of 6 subjects exposed for 6 weeks to weekly sessions of Coriolis stimulation to induce motion sickness. Between the first and second Coriolis sessions, subjects in the experimental groups received five episodes of autogenic training with either true (group TFB) or false (group FFB) feedback on their HR and ST. The control group (CTL) received no treatment. Subjects learned to control their HR and ST independent of whether they received true or false feedback. Learned control of ST and HR was not related to severity of motion sickness or subject's ability to withstand Coriolis stimulation following treatment. A lack of significant correlation between these variables suggested that subjects were not able to apply their skills of ANS self-regulation in the motion environment, and/ or such skills had little value in reducing symptoms of motion sickness or enhancing their ability to withstand rotations.
High-density, fail-in-place switches for computer and data networks
DOE Office of Scientific and Technical Information (OSTI.GOV)
Coteus, Paul W.; Doany, Fuad E.; Hall, Shawn A.
A structure for a network switch. The network switch may include a plurality of spine chips arranged on a plurality of spine cards, where one or more spine chips are located on each spine card; and a plurality of leaf chips arranged on a plurality of leaf cards, wherein one or more leaf chips are located on each leaf card, where each spine card is connected to every leaf chip and the plurality of spine chips are surrounded on at least two sides by leaf cards.
Health care report cards: what about consumers' perspectives?
McGee, J; Knutson, D
1994-10-01
Though the report card style is seen by many as a way to create better-informed consumers, very little is actually known about how consumers will respond to health care report cards. Report cards are only one of many factors that influence health care decision making. Much consumer-oriented effort and fine-tuning will be required to make report cards effective. Using the approach called "social marketing" as a framework, specific examples are used to outline some ideas for more intensive pursuit of consumers' perspectives in the design and distribution of report cards.
AVR Microcontroller-based automated technique for analysis of DC motors
NASA Astrophysics Data System (ADS)
Kaur, P.; Chatterji, S.
2014-01-01
This paper provides essential information on the development of a 'dc motor test and analysis control card' using AVR series ATMega32 microcontroller. This card can be interfaced to PC and calculates parameters like motor losses, efficiency and plot characteristics for dc motors. Presently, there are different tests and methods available to evaluate motor parameters, but a single and universal user-friendly automated set-up has been discussed in this paper. It has been accomplished by designing a data acquisition and SCR bridge firing hardware based on AVR ATMega32 microcontroller. This hardware has the capability to drive the phase-controlled rectifiers and acquire real-time values of current, voltage, temperature and speed of motor. Various analyses feasible with the designed hardware are of immense importance for dc motor manufacturers and quality-sensitive users. Authors, through this paper aim to provide details of this AVR-based hardware which can be used for dc motor parameter analysis and also for motor control applications.
Pradhan, Sukanta Kumar; De, Sachinandan
2017-01-01
The nucleotide-binding and oligomerization domain (NOD)-containing protein 1 (NOD1) plays the pivotal role in host-pathogen interface of innate immunity and triggers immune signalling pathways for the maturation and release of pro-inflammatory cytokines. Upon the recognition of iE-DAP, NOD1 self-oligomerizes in an ATP-dependent fashion and interacts with adaptor molecule receptor-interacting protein 2 (RIP2) for the propagation of innate immune signalling and initiation of pro-inflammatory immune responses. This interaction (mediated by NOD1 and RIP2) helps in transmitting the downstream signals for the activation of NF-κB signalling pathway, and has been arbitrated by respective caspase-recruitment domains (CARDs). The so-called CARD-CARD interaction still remained contradictory due to inconsistent results. Henceforth, to understand the mode and the nature of the interaction, structural bioinformatics approaches were employed. MD simulation of modelled 1:1 heterodimeric complexes revealed that the type-Ia interface of NOD1CARD and the type-Ib interface of RIP2CARD might be the suitable interfaces for the said interaction. Moreover, we perceived three dynamically stable heterotrimeric complexes with an NOD1:RIP2 ratio of 1:2 (two numbers) and 2:1. Out of which, in the first trimeric complex, a type-I NOD1-RIP2 heterodimer was found interacting with an RIP2CARD using their type-IIa and IIIa interfaces. However, in the second and third heterotrimer, we observed type-I homodimers of NOD1 and RIP2 CARDs were interacting individually with RIP2CARD and NOD1CARD (in type-II and type-III interface), respectively. Overall, this study provides structural and dynamic insights into the NOD1-RIP2 oligomer formation, which will be crucial in understanding the molecular basis of NOD1-mediated CARD-CARD interaction in higher and lower eukaryotes. PMID:28114344
The dynamics and control of large flexible asymmetric spacecraft
NASA Astrophysics Data System (ADS)
Humphries, T. T.
1991-02-01
This thesis develops the equations of motion for a large flexible asymmetric Earth observation satellite and finds the characteristics of its motion under the influence of control forces. The mathematical model of the structure is produced using analytical methods. The equations of motion are formed using an expanded momentum technique which accounts for translational motion of the spacecraft hub and employs orthogonality relations between appendage and vehicle modes. The controllability and observability conditions of the full spacecraft motions using force and torque actuators are defined. A three axis reaction wheel control system is implemented for both slewing the spacecraft and controlling its resulting motions. From minor slew results it is shown that the lowest frequency elastic mode of the spacecraft is more important than higher frequency modes, when considering the effects of elastic motion on instrument pointing from the hub. Minor slews of the spacecraft configurations considered produce elastic deflections resulting in rotational attitude motions large enough to contravene pointing accuracy requirements of instruments aboard the spacecraft hub. Active vibration damping is required to reduce these hub motions to acceptable bounds in sufficiently small time. A comparison between hub mounted collocated and hub/appendage mounted non-collocated control systems verifies that provided the non-collocated system is stable, it can more effectively damp elastic modes whilst maintaining adequate damping of rigid modes. Analysis undertaken shows that the reaction wheel controller could be replaced by a thruster control system which decouples the modes of the spacecraft motion, enabling them to be individually damped.
Helping Students Design HyperCard Stacks.
ERIC Educational Resources Information Center
Dunham, Ken
1995-01-01
Discusses how to teach students to design HyperCard stacks. Highlights include introducing HyperCard, developing storyboards, introducing design concepts and scripts, presenting stacks, evaluating storyboards, and continuing projects. A sidebar presents a HyperCard stack evaluation form. (AEF)
20. SECOND FLOOR, CARDING MACHINE, BY 'CARDING SPECIALISTS, CO., LTD., ...
20. SECOND FLOOR, CARDING MACHINE, BY 'CARDING SPECIALISTS, CO., LTD., PELLON LAND WORKS, HALIFAX, ENGLAND, SN #M2983 14 (EST. DATE 1940'S+), OPPOSITE END - Bamberg Cotton Mill, Main Street, Bamberg, Bamberg County, SC
Thermal transfer structures coupling electronics card(s) to coolant-cooled structure(s)
David, Milnes P; Graybill, David P; Iyengar, Madhusudan K; Kamath, Vinod; Kochuparambil, Bejoy J; Parida, Pritish R; Schmidt, Roger R
2014-12-16
Cooling apparatuses and coolant-cooled electronic systems are provided which include thermal transfer structures configured to engage with a spring force one or more electronics cards with docking of the electronics card(s) within a respective socket(s) of the electronic system. A thermal transfer structure of the cooling apparatus includes a thermal spreader having a first thermal conduction surface, and a thermally conductive spring assembly coupled to the conduction surface of the thermal spreader and positioned and configured to reside between and physically couple a first surface of an electronics card to the first surface of the thermal spreader with docking of the electronics card within a socket of the electronic system. The thermal transfer structure is, in one embodiment, metallurgically bonded to a coolant-cooled structure and facilitates transfer of heat from the electronics card to coolant flowing through the coolant-cooled structure.
Klemic, Gladys [Naperville, IL; Bailey, Paul [Chicago, IL; Breheny, Cecilia [Yonkers, NY
2008-09-02
The present invention relates to a citizen's dosimeter. More specifically, the invention relates to a small, portable, personal dosimetry device designed to be used in the wake of a event involving a Radiological Dispersal Device (RDD), Improvised Nuclear Device (IND), or other event resulting in the contamination of large area with radioactive material or where on site personal dosimetry is required. The card sized dosimeter generally comprises: a lower card layer, the lower card body having an inner and outer side; a upper card layer, the layer card having an inner and outer side; an optically stimulated luminescent material (OSLM), wherein the OSLM is sandwiched between the inner side of the lower card layer and the inner side of the upper card layer during dosimeter radiation recording, a shutter means for exposing at least one side of the OSLM for dosimeter readout; and an energy compensation filter attached to the outer sides of the lower and upper card layers.
Wada, Kazushige; Nittono, Hiroshi
2004-06-01
The reasoning process in the Wason selection task was examined by measuring card inspection times in the letter-number and drinking-age problems. 24 students were asked to solve the problems presented on a computer screen. Only the card touched with a mouse pointer was visible, and the total exposure time of each card was measured. Participants were allowed to cancel their previous selections at any time. Although rethinking was encouraged, the cards once selected were rarely cancelled (10% of the total selections). Moreover, most of the cancelled cards were reselected (89% of the total cancellations). Consistent with previous findings, inspection times were longer for selected cards than for nonselected cards. These results suggest that card selections are determined largely by initial heuristic processes and rarely reversed by subsequent analytic processes. The present study gives further support for the heuristic-analytic dual process theory.
The TOTEM T1 read out card motherboard
NASA Astrophysics Data System (ADS)
Minutoli, S.; Lo Vetere, M.; Robutti, E.
2010-12-01
This article describes the Read Out Card (ROC) motherboard, which is the main component of the T1 forward telescope front-end electronic system. The ROC main objectives are to acquire tracking data and trigger information from the detector. It performs data conversion from electrical to optical format and transfers the data streams to the next level of the system and it implements Slow Control modules which are able to receive, decode and distribute the LHC machine low jitter clock and fast command. The ROC also provides a spy mezzanine connection based on programmable FPGA and USB2.0 for laboratory and portable DAQ debugging system.
42 CFR 136a.16 - Beneficiary Identification Cards and verification of tribal membership.
Code of Federal Regulations, 2010 CFR
2010-10-01
... the charter, articles of incorporation, or other legal instruments or traditional processes of the... making their determination. (Approved by the Office of Management and Budget under control number 0915...
Easy robot programming for beginners and kids using augmented reality environments
NASA Astrophysics Data System (ADS)
Sakamoto, Kunio; Nishiguchi, Masahiro
2010-11-01
The authors have developed the mobile robot which can be programmed by command and instruction cards. All you have to do is to arrange cards on a table and to shot the programming stage by a camera. Our card programming system recognizes instruction cards and translates icon commands into the motor driver program. This card programming environment also provides low-level structure programming.
Code of Federal Regulations, 2010 CFR
2010-01-01
... provisions of Subpart B apply if credit cards are issued and (1) the card issuer and the seller are the same... 226.10. Section 226.11. This section applies when a card issuer receives a payment or other credit... Bill on a Transaction-by-Transaction Basis The following provisions of Subpart B apply if credit cards...
Krishnamurthy, Vani; Satish, Suchitha; Doreswamy, Srinivasa Murthy; Vimalambike, Manjunath Gubbanna
2016-07-01
Cytological evaluation of body fluids is an important diagnostic technique. Cytocentrifuge has contributed immensely to improve the diagnostic yield of the body fluids. Cytocentrifuge requires a filter card for absorbing the cell free fluid. This is the only consumable which needs to be purchased from the manufacturer at a significant cost. To compare the cell density in cytocentrifuge preparations made from commercially available filter cards with custom made filter cards. This was a prospective analytical study undertaken in department of pathology of a tertiary care centre. A 300 GSM handmade paper with the absorbability similar to the conventional card was obtained and fashioned to suit the filter card slot of the cytospin. Thirty seven body fluids were centrifuged using both conventional and custom made filter card. The cell density was measured as number of cells per 10 high power fields. The median cell density was compared using Mann-Whitney U test. The agreement between the values was analysed using Bland Altman analysis. The median cell count per 10 High power field (HPF) with conventional card was 386 and that with custom made card was 408. The difference was not statistically significant (p = 0.66). There was no significant difference in the cell density and alteration in the morphology between the cell preparations using both the cards. Custom made filter card can be used for cytospin cell preparations of body fluids without loss of cell density or alteration in the cell morphology and at a very low cost.
NASA Astrophysics Data System (ADS)
Shmyrov, A.; Shmyrov, V.; Shymanchuk, D.
2017-10-01
This article considers the motion of a celestial body within the restricted three-body problem of the Sun-Earth system. The equations of controlled coupled attitude-orbit motion in the neighborhood of collinear libration point L1 are investigated. The translational orbital motion of a celestial body is described using Hill's equations of circular restricted three-body problem of the Sun-Earth system. Rotational orbital motion is described using Euler's dynamic equations and quaternion kinematic equation. We investigate the problem of stability of celestial body rotational orbital motion in relative equilibrium positions and stabilization of celestial body rotational orbital motion with proposed control laws in the neighborhood of collinear libration point L1. To study stabilization problem, Lyapunov function is constructed in the form of the sum of the kinetic energy and special "kinematic function" of the Rodriguez-Hamiltonian parameters. Numerical modeling of the controlled rotational motion of a celestial body at libration point L1 is carried out. The numerical characteristics of the control parameters and rotational motion are given.
48 CFR 413.301 - Governmentwide commercial purchase card.
Code of Federal Regulations, 2010 CFR
2010-10-01
... purchase card. 413.301 Section 413.301 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE....301 Governmentwide commercial purchase card. USDA policy and procedures on use of the Governmentwide commercial purchase card are established in Departmental Regulation Series 5000. ...
A Cashless Society? The Plastic Revolution. Resources in Technology.
ERIC Educational Resources Information Center
Ritz, John M.
1993-01-01
Relates the history of credit cards, their evolution to current forms, and innovations (debit cards, token cards, smart cards). Considers their sociocultural impact. Provides a design brief, including objectives, resources, evaluation criteria, outcomes, and a quiz. (SK)
Engineering software development with HyperCard
NASA Technical Reports Server (NTRS)
Darko, Robert J.
1990-01-01
The successful and unsuccessful techniques used in the development of software using HyperCard are described. The viability of the HyperCard for engineering is evaluated and the future use of HyperCard by this particular group of developers is discussed.
Mammography screening credit card and compliance.
Schapira, D V; Kumar, N B; Clark, R A; Yag, C
1992-07-15
Screening for breast cancer using mammography has been shown to be effective in reducing mortality from breast cancer. The authors attempted to determine if use of a wallet-size plastic screening "credit" card would increase participants' compliance for subsequent mammograms when compared with traditional methods of increasing compliance. Two hundred and twenty consecutive women, ages 40-70 years, undergoing their first screening mammography were recruited and assigned randomly to four groups receiving (1) a reminder plastic credit card (2) reminder credit card with written reminder; (3) appointment card; and (4) verbal recommendation. Return rates of the four groups were determined after 15 months. The return rate for subsequent mammograms was significantly higher for participants (72.4%) using the credit card than for participants (39.8%) exposed to traditional encouragement/reminders (P less than 0.0001). The credit card was designed to show the participant's screening anniversary, and the durability of the card may have been a factor in increasing the return rate. The use of reminder credit cards may increase compliance for periodic screening examinations for other cancers and other chronic diseases.
The Vestibular System and Human Dynamic Space Orientation
NASA Technical Reports Server (NTRS)
Meiry, J. L.
1966-01-01
The motion sensors of the vestibular system are studied to determine their role in human dynamic space orientation and manual vehicle control. The investigation yielded control models for the sensors, descriptions of the subsystems for eye stabilization, and demonstrations of the effects of motion cues on closed loop manual control. Experiments on the abilities of subjects to perceive a variety of linear motions provided data on the dynamic characteristics of the otoliths, the linear motion sensors. Angular acceleration threshold measurements supplemented knowledge of the semicircular canals, the angular motion sensors. Mathematical models are presented to describe the known control characteristics of the vestibular sensors, relating subjective perception of motion to objective motion of a vehicle. The vestibular system, the neck rotation proprioceptors and the visual system form part of the control system which maintains the eye stationary relative to a target or a reference. The contribution of each of these systems was identified through experiments involving head and body rotations about a vertical axis. Compensatory eye movements in response to neck rotation were demonstrated and their dynamic characteristics described by a lag-lead model. The eye motions attributable to neck rotations and vestibular stimulation obey superposition when both systems are active. Human operator compensatory tracking is investigated in simple vehicle orientation control system with stable and unstable controlled elements. Control of vehicle orientation to a reference is simulated in three modes: visual, motion and combined. Motion cues sensed by the vestibular system through tactile sensation enable the operator to generate more lead compensation than in fixed base simulation with only visual input. The tracking performance of the human in an unstable control system near the limits of controllability is shown to depend heavily upon the rate information provided by the vestibular sensors.