30 CFR 47.52 - MSDS contents.

Code of Federal Regulations, 2014 CFR

2014-07-01

... an MSDS for a hazardous chemical produced at the mine, the MSDS must— (a) Be legible, accurate, and in English; (b) Use a chemical identity that permits cross-referencing between the list of hazardous chemicals, the chemical's label, and its MSDS; and (c) Contain information, or indicate if no information is...

30 CFR 47.52 - MSDS contents.

Code of Federal Regulations, 2011 CFR

2011-07-01

... an MSDS for a hazardous chemical produced at the mine, the MSDS must— (a) Be legible, accurate, and in English; (b) Use a chemical identity that permits cross-referencing between the list of hazardous chemicals, the chemical's label, and its MSDS; and (c) Contain information, or indicate if no information is...

30 CFR 47.52 - MSDS contents.

Code of Federal Regulations, 2013 CFR

2013-07-01

... an MSDS for a hazardous chemical produced at the mine, the MSDS must— (a) Be legible, accurate, and in English; (b) Use a chemical identity that permits cross-referencing between the list of hazardous chemicals, the chemical's label, and its MSDS; and (c) Contain information, or indicate if no information is...

30 CFR 47.52 - MSDS contents.

Code of Federal Regulations, 2012 CFR

2012-07-01

... an MSDS for a hazardous chemical produced at the mine, the MSDS must— (a) Be legible, accurate, and in English; (b) Use a chemical identity that permits cross-referencing between the list of hazardous chemicals, the chemical's label, and its MSDS; and (c) Contain information, or indicate if no information is...

The verification of hazardous ingredients disclosures in selected material safety data sheets.

PubMed

Welsh, M S; Lamesse, M; Karpinski, E

2000-05-01

Under the provisions of the Workplace Hazardous Materials Information System, workers in Canada must be provided with accurate and comprehensive Material Safety Data Sheets (MSDSs) describing controlled products used in the workplace. As part of an ongoing auditing project, the MSDSs of some controlled products in use under federal jurisdiction were assessed for accuracy and completeness of their ingredient disclosures. Chemical analyses of samples using gas chromatography-mass spectrometry, infrared spectrophotometry, X-ray fluorescence, and wet methods, were performed to verify the ingredient disclosures in accompanying MSDSs. In this article, analytical processes and results are presented for three cases in which MSDS ingredient disclosures were incomplete. The products included a synthetic lubricant used in a mining operation, a detergent concentrate used for aircraft cleaning, and an epoxy reducer used in aircraft maintenance. In each case, undisclosed hazardous ingredients were detected at concentrations which required their disclosure. In at least one of these cases, the information provided in other sections of the MSDS failed to adequately describe the hazards and required protective measures for the composition discovered. Because the results suggest circumstances in which the inaccurate MSDS could act as a mechanism for workplace injury, compliance measures including employer, inspector, and user education, improved MSDS writer qualifications, and the incorporation of chemical analysis in active auditing programs are recommended.

MSDS sky reference and preamplifier study

NASA Technical Reports Server (NTRS)

Larsen, L.; Stewart, S.; Lambeck, P.

1974-01-01

The major goals in re-designing the Multispectral Scanner and Data System (MSDS) sky reference are: (1) to remove the sun-elevation angle and aircraft-attitude angle dependence from the solar-sky illumination measurement, and (2) to obtain data on the optical state of the atmosphere. The present sky reference is dependent on solar elevation and provides essentially no information on important atmospheric parameters. Two sky reference designs were tested. One system is built around a hyperbolic mirror and the reflection approach. A second approach to a sky reference utilizes a fish-eye lens to obtain a 180 deg field of view. A detailed re-design of the present sky reference around the fish-eye approach, even with its limitations, is recommended for the MSDS system. A preamplifier study was undertaken to find ways of improving the noise-equivalent reflectance by reducing the noise level for silicon detector channels on the MSDS.

Economic impact of musculoskeletal disorders (MSDs) on work in Europe.

PubMed

Bevan, Stephen

2015-06-01

Musculoskeletal disorders (MSDs) are the leading cause of work disability, sickness absence from work, 'presenteeism' and loss of productivity across all the European Union (EU) member states. It is estimated that the total cost of lost productivity attributable to MSDs among people of working age in the EU could be as high as 2% of gross domestic product (GDP). This paper examines the available evidence on the economic burden of MSDs on work across Europe and highlights areas of policy, clinical and employment practice which might improve work outcomes for individuals and families and reduce the economic and social costs of MSDs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Analyses via automated mass spectrometry (MS/DS)

NASA Technical Reports Server (NTRS)

Koenig, T.

1985-01-01

New or improved uses of the Finnigan 4000 quadrupole mass spectrometer (MS) with its associated INCOS data system (DS) were investigated. The first phase involved an evaluative activity in which specific problems with miscalibration and gas chromatographic column conditioning were identified. This also revealed one solution to the problem of detection of substances not visible in the gas chromatography detection mode. A second phase was to seek useful applications of the direct inlet systems. This mode of sample introduction has not been previously utilized on the existing equipment and was successfully applied to the analysis of the components of TONOX 60/40 and in the thermal degradation products of some polymeric materials. Suggestions are made for improving and expanding the use of the MS/DS system in materials development and testing.

Chemical Safety Alert: Use Multiple Data Sources for Safer Emergency Response

EPA Pesticide Factsheets

Increases awareness of Material Safety Data Sheet (MSDS) limitations so that first responders to accidental releases can take proper precautions and identify additional sources of chemical information, such as reactivity and incompatibility.

Writing Material Safely Data Sheets Using the ANSI Standard.

ERIC Educational Resources Information Center

Croft, Suzanne D.

1996-01-01

Presents a history of the ANSI (American National Standards Institute) standard for preparation of Material Safety Data Sheets (MSDS), and provides a section-by-section guide to preparing MSDSs that comply with the standard. (SR)

[MSDs and job security of employees aged 50 years and over: a challenge for occupational health and public health].

PubMed

Chiron, Elise; Roquelaure, Yves; Ha, Catherine; Touranchet, Annie; Chotard, Anne; Bidron, Patrick; Ledenvic, Béatrice; Leroux, François; Mazoyer, Annick; Goldberg, Marcel; Imbernon, Ellen

2008-01-01

Work-related musculoskeletal disorders of the upper limbs (MSDs) are the first cause of occupational illness in France, as in Europe. A pilot network for epidemiological surveillance system of MSDs has been implemented in France's Loire Valley region to assess the prevalence of MSDs and their risk factors in the working population, namely the ageing workforce. The surveillance was based on a network of occupational physicians and used the recommendations of a group of European experts ('Saltsa Criteria document' consensus). Between 2002 and 2004, 3710 men and women (aged 20-59) representative of the regional workforce were randomly selected. Exposure to risk factors of MSDs was evaluated by the use of a self-administered questionnaire which aimed to assess bio-mechanical and psychosocial risk factors. With at least one of the six primary MSDs of the upper limbs having been clinically diagnosed using a rigorous protocol, the prevalence of clinically-diagnosed MSDs was high: about 11% of male and 15% of female workers suffered from at least one of the MSDs studied. After age fifty, about 19% of male and 27% of female workers suffered from at least one MSD and 4% of male and 6% of female workers from at least two disorders. Blue-collar workers were the most affected, regardless of age or gender, followed by office employees. Exposure to MSD risk factors of remained high after age fifty: 77% of male and 72% of female blue-collar workers were exposed to at least two MSD risk factors. The implications for the prevention of MSDs and job security of workers are discussed. The high prevalence of specific MSDs of the upper limb combined with a high exposure to risk factors of MSDs in ageing workers emphasizes the need to implement comprehensive prevention programs in most sectors to reduce the exposure to risk, the prevalence of MSDs and ensure the capacity to keep employees suffering from MSDs working, or at least to quickly return to work after recovery.

Reducing work-related Musculoskeletal Disorders (MSDs) through design: Views of ergonomics and design practitioners.

PubMed

Punchihewa, Himan K G; Gyi, Diane E

2015-01-01

Work-related Musculoskeletal Disorders (MSDs) affect the well-being of workers. Unfortunately, user requirements for design to reduce workplace risk factors for MSDs are not always effectively communicated to designers creating a mismatch between the user requirements and what is ultimately produced. To understand the views of practitioners of design and ergonomics regarding tools for participatory design and features they would like to see in such tools. An online questionnaire survey was conducted with a cohort of practitioners of ergonomics and design (n = 32). In-depth interviews were then conducted with a subset of these practitioners (n = 8). To facilitate discussion, a prototype integrated design tool was developed and demonstrated to practitioners using a verbalized walkthrough approach. According to the results of the questionnaire survey, the majority (70%) believed an integrated approach to participatory design would help reduce work-related MSDs and suggested ways to achieve this, for example, through sharing design information. The interviews showed the majority (n = 7) valued being provided with guidance on design activities and ways to manage and present information. It is believed that an integrated approach to design in order to help reduce work-related MSDs is highly important and a provision to evaluate design solutions would be desirable for practitioners of design and ergonomics.

Prevention of musculoskeletal disorders (MSDs) in office work: a case study.

PubMed

Lima, Tânia M; Coelho, Denis A

2011-01-01

Twelve recently built office work stations, where jobs imply continued use of information and communication technologies, were analyzed for ergonomic risk factors. Based on a literature review of ergonomic recommendations for computer and general office work, a checklist was devised for assistance in identifying inadequate ergonomic situations, a process that was informed by pain complaints information. RULA (Rapid Upper Limb Assessment) was selected to estimate the risk of MSDs, considering the criteria of applicability and appropriateness to the case studied. This method was applied by an occupational health and safety technician to the most critical job observed in the workplace. Criticality was estimated through observations aided by the systematic use of a checklist tailored to the specific office scenario. Recommendations for change were provided for implementation in all workplaces in the office, in order to improve work conditions, and guide the setup of a MSD prevention training program.

Surface Treatments to Minimize Concrete Deterioration. Report 2. Laboratory Evaluation of Surface Treatment Materials

DTIC Science & Technology

1990-09-01

Hydrocarbon 4 Moderate to severe scaling W-CS-58 Methyl 0+ No scaling--sealer’s color methacrylate changed from clear to cloudy white W-CS-59 Polyurethap 0+ No...years ago a manufacturer of polynmers introduced a high molecular-weight methacrylate (HMWM) monomer for sealing cracks by topical application. The...followed. Material Safety Data Sheets ( MSDS ) should be obtained from the manufacturers of such materials. In cases where the effects of a chemical

Searching for needles in a haystack: identifying innovations to prevent MSDs in the construction sector.

PubMed

Kramer, Desre M; Bigelow, Philip L; Carlan, Niki; Wells, Richard P; Garritano, Enzo; Vi, Peter; Plawinski, Marek

2010-07-01

This study identified innovations that could potentially reduce the risk of MSDs in the construction sector. The action research approach was based on a collaborative model of researchers working with workplace representatives. We searched for innovations being used by construction companies. From a potential database of 125 innovations, the study focused on 20 innovations that varied in their penetration into worksites in the geographical area, represented a variety of trades, and were a cross-section of tools and work organizational processes. It examined the attributes of the innovations, and the barriers to their adoption. The analysis was based on observations of workers, surveys of workers and construction-safety consultants, and company interviews. The study found that innovations were adopted by companies for multiple advantages including productivity and quality, but not necessarily ability to reduce MSD risks, their non-complexity, and cost. The major barriers for adoption were the traditional culture of the construction sector rather than financial ones. Copyright 2010 Elsevier Ltd. All rights reserved.

Database for Safety-Oriented Tracking of Chemicals

NASA Technical Reports Server (NTRS)

Stump, Jacob; Carr, Sandra; Plumlee, Debrah; Slater, Andy; Samson, Thomas M.; Holowaty, Toby L.; Skeete, Darren; Haenz, Mary Alice; Hershman, Scot; Raviprakash, Pushpa

2010-01-01

SafetyChem is a computer program that maintains a relational database for tracking chemicals and associated hazards at Johnson Space Center (JSC) by use of a Web-based graphical user interface. The SafetyChem database is accessible to authorized users via a JSC intranet. All new chemicals pass through a safety office, where information on hazards, required personal protective equipment (PPE), fire-protection warnings, and target organ effects (TOEs) is extracted from material safety data sheets (MSDSs) and recorded in the database. The database facilitates real-time management of inventory with attention to such issues as stability, shelf life, reduction of waste through transfer of unused chemicals to laboratories that need them, quantification of chemical wastes, and identification of chemicals for which disposal is required. Upon searching the database for a chemical, the user receives information on physical properties of the chemical, hazard warnings, required PPE, a link to the MSDS, and references to the applicable International Standards Organization (ISO) 9000 standard work instructions and the applicable job hazard analysis. Also, to reduce the labor hours needed to comply with reporting requirements of the Occupational Safety and Health Administration, the data can be directly exported into the JSC hazardous- materials database.

Musculoskeletal disorders (MSDs) and dental practice Part 2. Risk factors for dentistry, magnitude of the problem, prevention, and dental ergonomics.

PubMed

Yamalik, Nermin

2007-02-01

As a consequence of occupational stresses placed on their bodies, oral health care providers (OHP) are vulnerable to musculoskeletal disorders (MSDs). Muscular imbalance, neuromuscular inhibition, and pain and dysfunction may frequently be observed among OHP. Repeated unnatural, deviated or inadequate working postures, forceful hand movements, inadequate equipment or workplace designs and inappropriate work patterns are likely to be the particular risk factors. However, WMSDs are not an avoidable part of OHPs' professional lives. Paying the necessary attention to occupational and individual risk factors, prevalence, symptoms and consequences of WMSDs, and implementing the recommended health and safety measures can enable a long and healthy career. This review essentially aims to provide background information for OHP regarding the magnitude of the problem, particular risk factors and the available recommendations for prevention.

Occupational health and safety management practices and musculoskeletal disorders in aged care.

PubMed

Oakman, Jodi; Bartram, Timothy

2017-05-15

Purpose The purpose of this paper is to examine whether occupational health and safety (OHS) management used to manage musculoskeletal disorders (MSDs) in the aged care sector reflects contemporary research evidence of best practice to reduce the incidence of these disorders. Design/methodology/approach In total, 58 interviews were conducted with managers and supervisors in the aged care sector across four organisations in Australia. Policies and procedures relating to MSDs were reviewed for each organisation. Findings Policies and procedures for managing MSDs do not reflect contemporary evidence, which supports a complex aetiology, related to a range of physical and psychosocial workplace factors. Despite strong evidence that psychosocial factors contribute to MSD development, these were not included in the policies and procedures reviewed. Findings from the interviews management practices including leadership and various components of HRM were functioning well but fragmentation was evident due to the challenging nature of the aged care sector. Practical implications To address the significant burden of MSDs in the aged care sector, policies and procedures need to include coverage of psychosocial and physical workplace factors. The development of systematic and integrated OHS management at the workplace level may play an important role in the effective management of MSDs. Originality/value This study offers insights into the previously unexplored area of MSD risk management and the role of management practices such as HRM in the aged care sector.

40 CFR 63.5797 - How do I determine the organic HAP content of my resins and gel coats?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Plastic Composites Production Calculating Organic Hap Emissions Factors for Open Molding and Centrifugal... material manufacturer, such as manufacturer's formulation data and material safety data sheets (MSDS...

40 CFR 63.5797 - How do I determine the organic HAP content of my resins and gel coats?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Plastic Composites Production Calculating Organic Hap Emissions Factors for Open Molding and Centrifugal... material manufacturer, such as manufacturer's formulation data and material safety data sheets (MSDS...

Fire Safety Educational Material.

ERIC Educational Resources Information Center

Cohn, Bert M.

The state of the art of home fire safety educational material was reviewed to prepare a bibliography of home fire safety educational materials available from major public and private sources. Sources contacted were: National Fire Protection Association, National Safety Council, U.S. government agencies, private publishers and film distributors,…

40 CFR 63.822 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... § 63.827(c). A material safety data sheet (MSDS) may serve as a CPDS provided the MSDS meets the data requirements of § 63.827(b) and (c). The purpose of the CPDS is to assist the owner or operator in... packaging means any package or part of a package the shape of which can be readily changed. Flexible...

46 CFR 197.565 - Notifying personnel of benzene hazards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Notifying personnel of benzene hazards. 197.565 Section... AND HEALTH STANDARDS GENERAL PROVISIONS Benzene § 197.565 Notifying personnel of benzene hazards. (a) Material safety data sheet. A material safety data sheet (MSDS) addressing benzene must be made available...

46 CFR 197.565 - Notifying personnel of benzene hazards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Notifying personnel of benzene hazards. 197.565 Section... AND HEALTH STANDARDS GENERAL PROVISIONS Benzene § 197.565 Notifying personnel of benzene hazards. (a) Material safety data sheet. A material safety data sheet (MSDS) addressing benzene must be made available...

46 CFR 197.565 - Notifying personnel of benzene hazards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Notifying personnel of benzene hazards. 197.565 Section... AND HEALTH STANDARDS GENERAL PROVISIONS Benzene § 197.565 Notifying personnel of benzene hazards. (a) Material safety data sheet. A material safety data sheet (MSDS) addressing benzene must be made available...

RMP Guidance for Warehouses - Appendix D: OSHA Guidance on PSM

EPA Pesticide Factsheets

This text is taken directly from OSHA's appendix C to the Process Safety Management standard (29 CFR 1910.119). Compiled information required by this standard, including material safety data sheets (MSDS), is essential to process hazards analysis (PHA).

Advanced research workshop: nuclear materials safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jardine, L J; Moshkov, M M

The Advanced Research Workshop (ARW) on Nuclear Materials Safety held June 8-10, 1998, in St. Petersburg, Russia, was attended by 27 Russian experts from 14 different Russian organizations, seven European experts from six different organizations, and 14 U.S. experts from seven different organizations. The ARW was conducted at the State Education Center (SEC), a former Minatom nuclear training center in St. Petersburg. Thirty-three technical presentations were made using simultaneous translations. These presentations are reprinted in this volume as a formal ARW Proceedings in the NATO Science Series. The representative technical papers contained here cover nuclear material safety topics on themore » storage and disposition of excess plutonium and high enriched uranium (HEU) fissile materials, including vitrification, mixed oxide (MOX) fuel fabrication, plutonium ceramics, reprocessing, geologic disposal, transportation, and Russian regulatory processes. This ARW completed discussions by experts of the nuclear materials safety topics that were not covered in the previous, companion ARW on Nuclear Materials Safety held in Amarillo, Texas, in March 1997. These two workshops, when viewed together as a set, have addressed most nuclear material aspects of the storage and disposition operations required for excess HEU and plutonium. As a result, specific experts in nuclear materials safety have been identified, know each other from their participation in t he two ARW interactions, and have developed a partial consensus and dialogue on the most urgent nuclear materials safety topics to be addressed in a formal bilateral program on t he subject. A strong basis now exists for maintaining and developing a continuing dialogue between Russian, European, and U.S. experts in nuclear materials safety that will improve the safety of future nuclear materials operations in all the countries involved because of t he positive synergistic effects of focusing these diverse backgrounds

EPCRA Sections 311-312

EPA Pesticide Factsheets

Emergency Planning and Community Right-to-Know Act hazardous chemical storage reporting requirements. Facilities must maintain a material safety data sheet (MSDS) and inventory to submit to their SERC, LEPC, and local fire department.

Quality Control: (Material) Safety Data Sheets.

PubMed

Allen, Loyd V

2017-01-01

Safety Data Sheets (formerly Material Safety Data Sheets) are a system for cataloging information on chemicals, chemical compounds, and chemical mixtures and include instructions for the safe use and potential hazards associated with a particular material or product. At present, there are 16 sections of Safety Data Sheets, and these sections are discussed in this article. Two United States Pharmacopeia compounding-related chapters (<795> and <800>) refer to Safety Data Sheets, and this article provides a brief discussion on the terminology contained within those chapters. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

Musculoskeletal symptoms and ergonomic hazards among material handlers in grocery retail industries

NASA Astrophysics Data System (ADS)

Nasrull Abdol Rahman, Mohd; Zuhaidi, Muhammad Fareez Ahmad

2017-08-01

Grocery retail work can be physically demanding as material handler’s tasks involve manual lifting, lowering, carrying, pushing and pulling loads. The nature of this work puts them at a risk for serious low back pain, shoulder pain and other musculoskeletal injuries. This study was conducted by using two different types of tools which were Nordic Musculoskeletal Questionnaire (NMQ) as a survey and Washington Industrial Safety and Health Act (WISHA) Checklist as a direct observation method. Among 46 males and 14 females material handlers were involved throughout this study. For NMQ, the highest body part trouble in the last 12 months was low back pain (88.3%), followed by upper back (68.3%), neck (55.3%) and shoulder (36.7%). While for WISHA Checklist, most of them experienced hazard level involving awkward posture and high hand force. From the research conducted, musculoskeletal disorders (MSDs) and ergonomic risk factors (ERFs) do related as it showed that musculoskeletal disorders may arise if the workers ignored the safety in ergonomic hazards.

Mine Safety Detection System (MSDS)

DTIC Science & Technology

2012-09-01

that comes to rest on the bottom in either sea lane will represent a navigation obstacle resulting in lane closure until the wreck can be cleared...order in which the depth layers are searched follows a rational that emulates the analogy of “testing the waters before diving in”. As the oil

Proceedings: Workshop on Environmental Considerations in the Life-Cycle of Paints and Coatings Held in Champaign, Illinois on September 9-10, 1986

DTIC Science & Technology

1988-07-01

MSDS or Material Safety Data Sheets from our suppliers and we are required to provide the same for our customers . We are required to train our personnel...non-sparking tools. Labels We protect our customers by labeling our materials in accordance with the NPCA Labeling Guide which is at least as...stringent as any federal or local regulations, by providing Material Safety Data Sheets and by providing customer assistance O when requested regarding safe

Computer Programs.

ERIC Educational Resources Information Center

Anderson, Tiffoni

This module provides information on development and use of a Material Safety Data Sheet (MSDS) software program that seeks to link literacy skills education, safety training, and human-centered design. Section 1 discusses the development of the software program that helps workers understand the MSDSs that accompany the chemicals with which they…

Incidence of MSDs and neck and back pain among logging machine operators in the southern U.S.

PubMed

Lynch, S M; Smidt, M F; Merrill, P D; Sesek, R F

2014-07-01

There are limited data about the incidence and prevalence of musculoskeletal disorders (MSDs) among loggers in the southern U.S. despite the risk factors associated with these occupations. Risk factors are both personal (age, body mass index, etc.) and job-related (awkward postures, repetitive hand and foot movements, vibration, etc.). A survey was conducted to estimate the incidence of self-reported pain and diagnosed MSDs and to study the relationship with known risk factors. Respondents were loggers attending training and continuing education classes. Respondents were asked to identify personal attributes, machine use, awkward postures, repetitive movements, and recent incidence of pain and medical diagnoses. All were male with an average age of 44 (range of 19-67) and an average body mass index of 31.3. Most were machine operators (97%) who have worked in the logging industry for an average of 22.9 years. Most machines identified were manufactured within the past ten years (average machine age 6.7 years). For machine operators, 10.5% (16) reported an MSD diagnosis, 74.3% (113) reported at least mild back pain, and 71.7% (109) reported at least mild neck pain over the past year. Further analysis attempted to identify an association between personal attributes, machine use, posture, and pain. Risk factors related to machine use may be biased since most survey respondents had considerable choice or control in working conditions, as they were firm owners and/or supervisors.

78 FR 24309 - Pipeline and Hazardous Materials Safety Administration

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration List of Special Permit Applications Delayed AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA..., Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building...

76 FR 45332 - Pipeline and Hazardous Materials Safety Administration

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-28

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of... Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: List of Applications for Modification of..., 2011. ADDRESSES: Record Center, Pipeline and Hazardous Materials Safety Administration, U.S. Department...

78 FR 18419 - Office of Hazardous Materials Safety; Delayed Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of Hazardous Materials Safety; Delayed Applications AGENCY: Pipeline and Hazardous Materials Safety.... FOR FURTHER INFORMATION CONTACT: Ryan Paquet, Director, Office of Hazardous Materials Special Permits...

76 FR 4276 - Hazardous Materials: Improving the Safety of Railroad Transportation of Hazardous Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

...-0004] Hazardous Materials: Improving the Safety of Railroad Transportation of Hazardous Materials... hazardous materials program. DATES: The public meeting will be held on Tuesday, February 22, 2011, starting...--Hazardous Materials, FRA Office of Safety Assurance and Compliance, at least 4 business days before the date...

Alcohol/safety public information materials catalog. Number 5

DOT National Transportation Integrated Search

1981-06-01

Author's abstract: The Alcohol/Safety Public Information Materials Catalog is designed for use by persons developing public information programs on alcohol and highway safety. It lists materials produced for campaigns along with journal articles and ...

Design improvement of automated gallon washing machine to minimize musculoskeletal disorders (MSDs) in CV Barokah Abadi using ergonomic function deployment (EFD) approach

NASA Astrophysics Data System (ADS)

Fakhriza, Z.; Rahayu, M.; Iqbal, M.

2017-12-01

In the production activity of Bottled Drinking Water (AMDK) in CV Barokah Abadi there is a gallon washing station. At the work station it involves three stages of activity such as washing and rinsing the outside of the gallon, spraying the inside of the gallon and rubbing the inside of the gallon which is done in a separate place. Distribution of Nordic Body Map (NBM) questionnaires showing employee complaints data at gallon washing stations where workers complained of pain in the right upper arm, right forearm and right wrist respectively 88% and workers also complained of pain in the waist and The right hand respectively by 81%. Ergonomic gallon washer is one way to minimize the risk of MSDs. The design begins with an ergonomic evaluation of the existing conditions and the concept of the initial design of the gallon washer. The evaluation is utilized for consideration of design improvements with the utilization of Ergonomic Function Deployment (EFD) in order for the product concept to conform to the ECSHE principle (Effective, Comfortable, Safe, Healthy and Efficient). The tool improvement design can minimize the risk of MSDs seen from the worker’s posture while using an ergonomic washer.

Materials Safety - Not just Flammability and Toxic Offgassing

NASA Technical Reports Server (NTRS)

Pedley, Michael D.

2007-01-01

For many years, the safety community has focused on a limited subset of materials and processes requirements as key to safety: Materials flammability, Toxic offgassing, Propellant compatibility, Oxygen compatibility, and Stress-corrosion cracking. All these items are important, but the exclusive focus on these items neglects many other items that are equally important to materials safety. Examples include (but are not limited to): 1. Materials process control -- proper qualification and execution of manufacturing processes such as structural adhesive bonding, welding, and forging are crucial to materials safety. Limitation of discussions on materials process control to an arbitrary subset of processes, known as "critical processes" is a mistake, because any process where the quality of the product cannot be verified by inspection can potentially result in unsafe hardware 2 Materials structural design allowables -- development of valid design allowables when none exist in the literature requires extensive testing of multiple lots of materials and is extremely expensive. But, without valid allowables, structural analysis cannot verify structural safety 3. Corrosion control -- All forms of corrosion, not just stress corrosion, can affect structural integrity of hardware 4. Contamination control during ground processing -- contamination control is critical to manufacturing processes such as adhesive bonding and also to elimination foreign objects and debris (FOD) that are hazardous to the crew of manned spacecraft in microgravity environments. 5. Fasteners -- Fastener design, the use of verifiable secondary locking features, and proper verification of fastener torque are essential for proper structural performance This presentation discusses some of these key factors and the importance of considering them in ensuring the safety of space hardware.

Development of E-Learning Materials for Machining Safety Education

NASA Astrophysics Data System (ADS)

Nakazawa, Tsuyoshi; Mita, Sumiyoshi; Matsubara, Masaaki; Takashima, Takeo; Tanaka, Koichi; Izawa, Satoru; Kawamura, Takashi

We developed two e-learning materials for Manufacturing Practice safety education: movie learning materials and hazard-detection learning materials. Using these video and sound media, students can learn how to operate machines safely with movie learning materials, which raise the effectiveness of preparation and review for manufacturing practice. Using these materials, students can realize safety operation well. Students can apply knowledge learned in lectures to the detection of hazards and use study methods for hazard detection during machine operation using the hazard-detection learning materials. Particularly, the hazard-detection learning materials raise students‧ safety consciousness and increase students‧ comprehension of knowledge from lectures and comprehension of operations during Manufacturing Practice.

78 FR 42998 - Hazardous Materials: Improving the Safety of Railroad Transportation of Hazardous Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-18

... Materials: Improving the Safety of Railroad Transportation of Hazardous Materials AGENCY: Pipeline and... that affect the safety of the transportation of hazardous materials by rail and are seeking input from... authority to FRA. 49 CFR 1.89(a) through (q). The Federal hazardous materials transportation laws, 49 U.S.C...

BUY CLEAN MANUAL INTERACTIVE CD-ROM

EPA Science Inventory

This interactive CD-ROM contains exercises and opportunities to help users develop a Buy Clean Program for janitorial cleaning products. CD users can learn about Material Safety Data Sheets (MSDS), complete an inventory list, and compare cleaning products to see which have the le...

Musculoskeletal disorders, personality traits, psychological distress, and accident proneness of Chinese coal miners.

PubMed

Deng, Mingming; Wu, Feng; Wang, Jun; Sun, Linyan

2017-01-01

Human factors comprise one of the important reasons leading to the casualty accidents in coal mines. The aim of this study was to analyze the relationships among musculoskeletal disorders (MSDs), personality traits, psychological distress, and accident proneness of coal miners. There were 1500 Chinese coal miners surveyed in this study. Among these miners, 992 valid samples were obtained. The study surveyed the MSDs, personality traits, psychological distress, and accident proneness of coal miners with MSDs Likert scale, Eysenck personality questionnaire, Symptom Checklist-90 (SCL-90) scale, and accident proneness questionnaire, respectively. The highest MSDs level was found in the waist. The increasing working age of the miners was connected with increased MSDs and psychological distress. Significant differences in MSDs and psychological distress of miners from different types of work were observed. Coal miners with higher MSDs had higher accident proneness. Coal miners with higher neuroticism dimension of Eysenck personality and more serious psychological distress had higher accident proneness. Phobic anxiety, paranoid ideation and psychoticism dimension of psychological distress were the three most important indicators that had significant positive relationships with accident proneness. The MSDs, neuroticism dimension, and psychological distress of the coal mine workers are important to work safety and require serious attention. Some implications concerning coal mine safety management in China were provided.

46 CFR 127.410 - Safety-glazing materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ARRANGEMENTS Construction of Windows, Visibility, and Operability of Coverings § 127.410 Safety-glazing materials. Glass and other glazing material used in windows must be material that will not break into...

46 CFR 116.1010 - Safety glazing materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ARRANGEMENT Window Construction and Visibility § 116.1010 Safety glazing materials. Glass and other glazing material used in windows must be of material that will not break into dangerous fragments if fractured. ...

41 CFR 101-42.202 - Identification of hazardous materials.

Code of Federal Regulations, 2011 CFR

2011-07-01

...'s Federal Supply Service (4FQ) maintains an automated data base, accessible via modem and computer... on the terminal screen, the system allows for the addition of the MSDS to the user's local data base... personnel who handle, store, ship, use or dispose of hazardous materials. Each record in the data base is...

41 CFR 101-42.202 - Identification of hazardous materials.

Code of Federal Regulations, 2010 CFR

2010-07-01

...'s Federal Supply Service (4FQ) maintains an automated data base, accessible via modem and computer... on the terminal screen, the system allows for the addition of the MSDS to the user's local data base... personnel who handle, store, ship, use or dispose of hazardous materials. Each record in the data base is...

41 CFR 101-42.202 - Identification of hazardous materials.

Code of Federal Regulations, 2013 CFR

2013-07-01

...'s Federal Supply Service (4FQ) maintains an automated data base, accessible via modem and computer... on the terminal screen, the system allows for the addition of the MSDS to the user's local data base... personnel who handle, store, ship, use or dispose of hazardous materials. Each record in the data base is...

41 CFR 101-42.202 - Identification of hazardous materials.

Code of Federal Regulations, 2014 CFR

2014-07-01

...'s Federal Supply Service (4FQ) maintains an automated data base, accessible via modem and computer... on the terminal screen, the system allows for the addition of the MSDS to the user's local data base... personnel who handle, store, ship, use or dispose of hazardous materials. Each record in the data base is...

41 CFR 101-42.202 - Identification of hazardous materials.

Code of Federal Regulations, 2012 CFR

2012-07-01

...'s Federal Supply Service (4FQ) maintains an automated data base, accessible via modem and computer... on the terminal screen, the system allows for the addition of the MSDS to the user's local data base... personnel who handle, store, ship, use or dispose of hazardous materials. Each record in the data base is...

40 CFR 721.3900 - Alkyl polyethylene glycol phosphate, potassium salt.

Code of Federal Regulations, 2010 CFR

2010-07-01

... methods for protecting against such risk, into a Material Safety Data Sheet (MSDS) as described in § 721..., potassium salt. 721.3900 Section 721.3900 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... or method of manufacture, import, or processing associated with any use of this substance without...

40 CFR 721.1850 - Toluene sulfonamide bis-phe-nol A epoxy adduct.

Code of Federal Regulations, 2010 CFR

2010-07-01

... methods for protecting against such risk, into a Material Safety Data Sheet (MSDS) as described in § 721... epoxy adduct. 721.1850 Section 721.1850 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... or method of manufacture, import, or processing associated with any use of this substance without...

40 CFR 721.7500 - Nitrate polyether polyol (generic name).

Code of Federal Regulations, 2010 CFR

2010-07-01

... information on methods for protecting against such risk, into a Material Safety Data Sheet (MSDS) as described...). 721.7500 Section 721.7500 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC... substance is any manner or method of manufacture, import, or processing associated with any use of this...

Accuracy of reported flash point values on material safety data sheets and the impact on product classification.

PubMed

Radnoff, Diane

2013-01-01

Material Safety Data Sheets (MSDSs) are the foundation of worker right-to-know legislation for chemical hazards. Suppliers can use product test data to determine a product's classification. Alternatively, they may use evaluation and professional judgment based on test results for the product or a product, material, or substance with similar properties. While the criteria for classifying products under the new Globally Harmonized System of Classification and Labeling of Chemicals (GHS) are different, a similar process is followed. Neither the current Workplace Hazardous Materials Information System (WHMIS) nor GHS require suppliers to test their products to classify them. In this project 83 samples of products classified as flammable or combustible, representing a variety of industry sectors and product types, were collected. Flash points were measured and compared to the reported values on the MSDSs. The classifications of the products were then compared using the WHMIS and GHS criteria. The results of the study indicated that there were significant variations between the disclosed and measured flash point values. Overall, more than one-third of the products had flash points lower than that disclosed on the MSDS. In some cases, the measured values were more than 20°C lower than the disclosed values. This could potentially result in an underestimation regarding the flammability of the product so it is important for employers to understand the limitations in the information provided on MSDSs when developing safe work procedures and training programs in the workplace. Nearly one-fifth of the products were misclassified under the WHMIS system as combustible when the measured flash point indicated that they should be classified as flammable when laboratory measurement error was taken into account. While a similar number of products were misclassified using GHS criteria, the tendency appeared to be to "over-classify" (provide a hazard class that was more conservative

46 CFR 177.1010 - Safety glazing materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... TONS) CONSTRUCTION AND ARRANGEMENT Window Construction and Visibility § 177.1010 Safety glazing materials. Glass and other glazing material used in windows accessible to passengers and crew must be of...

QC operator’s nonneutral posture against musculoskeletal disorder’s (MSDs) risks

NASA Astrophysics Data System (ADS)

Kautsar, F.; Gustopo, D.; Achmadi, F.

2018-04-01

Musculoskeletal disorders refer to a gamut of inflammatory and degenerative disorders aggravated largely by the performance of work. It is the major cause of pain, disability, absenteeism and reduced productivity among workers worldwide. Although it is not fatal, MSDs have the potential to develop into serious injuries in the musculoskeletal system if ignored. QC operators work in nonneutral body posture. This cross-sectional study was condusted in order to investigate correlation between risk assessment results of QEC and body posture calculation of mannequin pro. Statistical analysis was condusted using SPSS version 16.0. Validity test, Reliability test and Regression analysis were conducted to compare the risk assessment output of applied method and nonneutral body posture simulation. All of QEC’s indicator classified as valid and reliable. The result of simple regression anlysis are back (0.326<4.32), shoulder/arm (8.489>4.32), wrist/hand (4.86 >4.32) and neck (1.298 <4.32). Result of this study shows that there is an influence between nonneutral body posture of the QC operator during work with risk of musculoskeletal disorders. The potential risk of musculoskeletal disorders is in the shoulder/arm and wrist/hand of the QC operator, whereas the back and neck are not affected.

Systematic control of nonmetallic materials for improved fire safety

NASA Technical Reports Server (NTRS)

1972-01-01

The elements of a systematic fire safety program are summarized and consist of fire safety criteria, design considerations, testing of materials, development of nonmetallic materials, nonmetallic materials information systems, design reviews, and change control. The system described in this report was developed for the Apollo spacecraft. The system can, however, be tailored to many industrial, commercial, and military activities.

Gender differences, work stressors and musculoskeletal disorders in weaving industries.

PubMed

Nag, Anjali; Vyas, H; Nag, P K

2010-01-01

A study was undertaken to identify the work stressors among male and female weavers (N=516) in powerloom and handloom and examine the association of work stressors with the prevalence of work related musculo-skeletal disorders (MSDs). Physical and psychosocial stresses of work, job diagnostics, hazards of workplace, working environment and MSDs prevalence were assessed. There is high prevalence of MSDs among weavers. Female weavers in powerloom and handloom were more prone to developing MSDs in upper back (OR 1.8; p<0.05 and OR 2.1; p<0.01) and lower back (OR 1.9; p<0.05 and OR 1.8; p<0.05). Male weavers were more prone to developing pain in the knee (OR 2.9; p<0.001), and hand (OR 2.2; p<0.05). Multivariate analysis indicated that job duration >10 yr (OR 3.7, p<0.05), manual material handling (OR 3, p<0.05), and poor machinery safety (OR 11, p<0.05), contributed to occurrence of MSDs amongst powerloom weavers. Among the handloom weavers, age >25 yr (OR 3.2, p<0.05), poor machinery design (OR 2.2, p<0.01), mental overload (OR 5.7, p<0.001), skill requirement to perform jobs (OR 20.7, p<0.05) had significant influence in the occurrence of pain. Gender differences exist in the prevalence of MSDs and the perception of work and psycho-social stresses among the weavers.

Materials for lithium-ion battery safety.

PubMed

Liu, Kai; Liu, Yayuan; Lin, Dingchang; Pei, Allen; Cui, Yi

2018-06-01

Lithium-ion batteries (LIBs) are considered to be one of the most important energy storage technologies. As the energy density of batteries increases, battery safety becomes even more critical if the energy is released unintentionally. Accidents related to fires and explosions of LIBs occur frequently worldwide. Some have caused serious threats to human life and health and have led to numerous product recalls by manufacturers. These incidents are reminders that safety is a prerequisite for batteries, and serious issues need to be resolved before the future application of high-energy battery systems. This Review aims to summarize the fundamentals of the origins of LIB safety issues and highlight recent key progress in materials design to improve LIB safety. We anticipate that this Review will inspire further improvement in battery safety, especially for emerging LIBs with high-energy density.

Materials for lithium-ion battery safety

PubMed Central

Liu, Kai

2018-01-01

Lithium-ion batteries (LIBs) are considered to be one of the most important energy storage technologies. As the energy density of batteries increases, battery safety becomes even more critical if the energy is released unintentionally. Accidents related to fires and explosions of LIBs occur frequently worldwide. Some have caused serious threats to human life and health and have led to numerous product recalls by manufacturers. These incidents are reminders that safety is a prerequisite for batteries, and serious issues need to be resolved before the future application of high-energy battery systems. This Review aims to summarize the fundamentals of the origins of LIB safety issues and highlight recent key progress in materials design to improve LIB safety. We anticipate that this Review will inspire further improvement in battery safety, especially for emerging LIBs with high-energy density. PMID:29942858

Health, safety and environmental requirements for composite materials

NASA Technical Reports Server (NTRS)

Hazer, Kathleen A.

1994-01-01

The health, safety and environmental requirements for the production of composite materials are discussed. The areas covered include: (1) chemical identification for each chemical; (2) toxicology; (3) industrial hygiene; (4) fire and safety; (5) environmental aspects; and (6) medical concerns.

Hazardous Materials Packaging and Transportation Safety

DOT National Transportation Integrated Search

1995-09-27

To establish safety requirements for the proper packaging and : transportation of Department of Energy (DOE) offsite shipments and onsite transfers of hazardous materials and for modal transport. (Offsite is any area within or outside a DOE site to w...

Validation of Alternatives to High Volatile Organic Compound Solvents Used in Aeronautical Antifriction Bearing Cleaning

DTIC Science & Technology

2006-10-17

Name, address, telephone number, and technical point of contact at company supplying product. (3) Material safety data sheet (MSDS) and label...existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments...Depot level maintenance cleaning. Data analysis and interpretation are based on analytical test results as well as visual inspections performed on

Qualification of an Acceptable Alternative to Halon 1211 DOD Flightline Extinguishers

DTIC Science & Technology

2008-09-01

Minimum Performance Standard MSDS Material Safety Data Sheet NATO North Atlantic Treaty Organization NAWCAD Naval Air Warfare Center Aircraft...included chronic and acute occupational exposure limits and cardiotoxicity. Alternatives that were carcinogens or that had any adverse developmental...gear to fight the fires Does not exceed pain threshold for exposed skin Each unit tested met this performance objective 2. Firefighting

Consumer Product Category Database

EPA Pesticide Factsheets

The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use information is compiled from multiple sources while product information is gathered from publicly available Material Safety Data Sheets (MSDS). EPA researchers are evaluating the possibility of expanding the database with additional product and use information.

Safety Features of Material and Personnel Movement Devices. Module SH-25. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on safety features of material and personnel movement devices is one of 50 modules concerned with job safety and health. This module covers safe conditions and operating practices for conveyors, elevators, escalators, moving walks, manlifts, forklifts, and motorized hand trucks. Following the introduction, 10 objectives (each…

75 FR 52392 - Office Of Hazardous Materials Safety; Notice of Application for Special Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-25

... DEPARTMENT OF TRANSPORTATION Pipeline And Hazardous Materials Safety Administration Office Of Hazardous Materials Safety; Notice of Application for Special Permits AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: List of applications for special permits. SUMMARY: In...

Seeding materials: Health and safety considerations

NASA Technical Reports Server (NTRS)

Brown, R. D.

1985-01-01

The choice of a proper seeding material for laser velocimeters must include health and safety considerations. Failure to do so can lead to catastrophic results. All materials are toxic, and laser velocimeter seeding materials are no exception. Toxicity may be considered an inherent property of a given material. The manifestation of that property or the physiological response to the material is dependent on dose and exposure conditions. An approximate physiological classification of toxicity is given in tablular form. Toxicity in some situations is not necessarily the most restrictive factor in selection of materials. It is also very important to consider how the material is used so that actual exposure to the material in a damaging form can result. For example, nickel and cadmium are both extremely toxic as systemic poisons and in the case of nickel as a carcinogen. Seeding materials are dispersed in air under conditions that favor personnel exposure. Dispersal equipment is frequently if not normally manned, and personnel are often required to make frequent adjustments to assure proper operations.

77 FR 71031 - Office of Hazardous Materials Safety; Actions on Special Permit Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-28

...), transportation in commerce 173.465(d). of certain Radioactive material in alternative packaging by highway. A... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of Hazardous Materials Safety; Actions on Special Permit Applications AGENCY: Pipeline And Hazardous Materials...

Environmental, Safety, and Health Considerations: Composite Materials in the Aerospace Industry

NASA Technical Reports Server (NTRS)

Chu, Huai-Pu (Compiler)

1994-01-01

The Aerospace Industries Association, Suppliers of Advanced Composite Materials Association, and the National Aeronautics and Space Administration co-sponsored a conference on 'Environmental, Safety, and Health Considerations--Composite Materials in the Aerospace Industry.' The conference was held in Mesa, Arizona, on October 20-21, 1994. Seventeen papers were presented in four sessions including general information, safety, waste, and emissions from composites. Topics range from product stewardship, best work practice, biotransformation of uncured composite materials, to hazardous waste determination and offgassing of composite materials.

Materials Handling. Module SH-01. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on materials handling is one of 50 modules concerned with job safety and health. It presents the procedures for safe materials handling. Discussed are manual handling methods (lifting and carrying by hand) and mechanical lifting (lifting by powered trucks, cranes or conveyors). Following the introduction, 15 objectives (each…

ISO 14624 Series - Space Systems - Safety and Compatibility of Materials Flammability Assessment of Spacecraft Materials

NASA Technical Reports Server (NTRS)

Hirsch, David B.

2007-01-01

A viewgraph presentation on the flammability of spacecraft materials is shown. The topics include: 1) Spacecraft Fire Safety; 2) Materials Flammability Test; 3) Impetus for enhanced materials flammability characterization; 4) Exploration Atmosphere Working Group Recommendations; 5) Approach; and 6) Status of implementation

Addendum to the Principles And Practices Manual. Loading Rates and Impacts of Substrate Delivery for Enhanced Anaerobic Bioremediation

DTIC Science & Technology

2010-01-01

attenuation MSDS material safety data sheet NAVFAC ESC Naval Facilities Engineering Command/Engineering Services Center NDMA N-nitrosodimethylamine...compounds (ER-1607, ER-200425, and ER- 201028). N-nitrosodimethylamine ( NDMA ) is used with propellants and is a carcinogen and emerging groundwater...contaminant at a number of DoD and DOE facilities. NDMA may be amendable to enhanced in situ bioremediation (Szecsody et al., 2009; Hatzinger et al., 2008

Materials-related issues in the safety and licensing of nuclear fusion facilities

NASA Astrophysics Data System (ADS)

Taylor, N.; Merrill, B.; Cadwallader, L.; Di Pace, L.; El-Guebaly, L.; Humrickhouse, P.; Panayotov, D.; Pinna, T.; Porfiri, M.-T.; Reyes, S.; Shimada, M.; Willms, S.

2017-09-01

Fusion power holds the promise of electricity production with a high degree of safety and low environmental impact. Favourable characteristics of fusion as an energy source provide the potential for this very good safety and environmental performance. But to fully realize the potential, attention must be paid in the design of a demonstration fusion power plant (DEMO) or a commercial power plant to minimize the radiological hazards. These hazards arise principally from the inventory of tritium and from materials that become activated by neutrons from the plasma. The confinement of these radioactive substances, and prevention of radiation exposure, are the primary goals of the safety approach for fusion, in order to minimize the potential for harm to personnel, the public, and the environment. The safety functions that are implemented in the design to achieve these goals are dependent on the performance of a range of materials. Degradation of the properties of materials can lead to challenges to key safety functions such as confinement. In this paper the principal types of material that have some role in safety are recalled. These either represent a potential source of hazard or contribute to the amelioration of hazards; in each case the related issues are reviewed. The resolution of these issues lead, in some instances, to requirements on materials specifications or to limits on their performance.

Analysis of Material Handling Safety in Construction Sites and Countermeasures for Effective Enhancement

PubMed Central

Anil Kumar, C. N.; Sakthivel, M.; Elangovan, R. K.; Arularasu, M.

2015-01-01

One of many hazardous workplaces includes the construction sites as they involve several dangerous tasks. Many studies have revealed that material handling equipment is a major cause of accidents at these sites. Though safety measures are being followed and monitored continuously, accident rates are still high as either workers are unaware of hazards or the safety regulations are not being strictly followed. This paper analyses the safety management systems at construction sites through means of questionnaire surveys with employees, specifically referring to safety of material handling equipment. Based on results of the questionnaire surveys, two construction sites were selected for a safety education program targeting worker safety related to material handling equipment. Knowledge levels of the workers were gathered before and after the program and results obtained were subjected to a t-test analysis to mark significance level of the conducted safety education program. PMID:26446572

10 CFR 32.31 - Certain industrial devices containing byproduct material: Safety criteria.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Certain industrial devices containing byproduct material: Safety criteria. (a) An applicant for a license... 10 Energy 1 2014-01-01 2014-01-01 false Certain industrial devices containing byproduct material: Safety criteria. 32.31 Section 32.31 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO...

10 CFR 32.31 - Certain industrial devices containing byproduct material: Safety criteria.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Certain industrial devices containing byproduct material: Safety criteria. (a) An applicant for a license... 10 Energy 1 2013-01-01 2013-01-01 false Certain industrial devices containing byproduct material: Safety criteria. 32.31 Section 32.31 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO...

Introduction to ergonomics for healthcare workers.

PubMed

Waters, Thomas R

2010-01-01

Healthcare workers who handle and move patients as part of their jobs suffer a disproportionately high number of work-related musculoskeletal disorders (MSDs). The majority of reported work-related MSDs are back pain cases that result in significant numbers of lost work days. It is likely that these lost workdays have a substantial impact on the quality and cost of health care. Patient care ergonomics can reduce the risk of work-related MSDs by helping safety experts design the work so it can be safely performed by most workers. This article provides a general overview of ergonomics--what it is, how it can be used to help design safe work, and why all healthcare workers and administrators should know and understand how excessive work demands can lead to increased risk of work-related MSDs. The article will also explain technological solutions that can be implemented to reduce the risk of work-related MSDs for healthcare workers.

76 FR 77589 - Office of Hazardous Materials Safety; Notice of Application for Special Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-13

... DC. commerce of radioactive materials without being subject to the requirements in 49 CFR 173.417(a... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of Hazardous Materials Safety; Notice of Application for Special Permits AGENCY: Pipeline and Hazardous...

77 FR 36607 - Office of Hazardous Materials Safety Notice of Application for Special Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-19

... commerce of certain DOT Specification 20WC radioactive material packagings after October 1, 2008. (mode 1... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of Hazardous Materials Safety Notice of Application for Special Permits AGENCY: Pipeline and Hazardous...

76 FR 15046 - Office of Hazardous Materials Safety; Notice of Applications for Modification of Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of Hazardous Materials Safety; Notice of Applications for Modification of Special Permit AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: List of applications for modification of...

Development of a British Road Safety Education Support Materials Curriculum.

ERIC Educational Resources Information Center

Bouck, Linda H.

Road safety education needs to be a vital component in the school curriculum. This paper describes a planned road safety education support materials curriculum developed to aid educators in the Wiltshire County (England) primary schools. Teaching strategies include topic webs, lecture, class discussion, group activities, and investigative learning…

75 FR 5167 - Office of Hazardous Materials Safety; Notice of Delays In Processing of Special Permits Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of Hazardous Materials Safety; Notice of Delays In Processing of Special Permits Applications AGENCY: Pipeline..., Office of Hazardous Materials Special Permits and Approvals, Pipeline and Hazardous Materials Safety...

75 FR 78800 - Office of Hazardous Materials Safety; Notice of Delays in Processing of Special Permits Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-16

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of Hazardous Materials Safety; Notice of Delays in Processing of Special Permits Applications AGENCY: Pipeline..., Office of Hazardous Materials Special Permits and Approvals, Pipeline and Hazardous Materials Safety...

Operations system administration plan for HANDI 2000 business management system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, D.E.

The Hanford Data Integration 2000 (HANDI 2000) Project will result in an integrated and comprehensive set of functional applications containing core information necessary to support the Project Hanford Management Contract (PHMC). It is based on the Commercial-Off-The-Shelf (COTS) product solution with commercially proven business processes. This includes systems that support finance, supply, chemical management, human resources and payroll activities on the Hanford Site. The Passport (PP) software is an integrated application for Accounts Payable, Contract Management, Inventory Management, Purchasing, and Material Safety Data Sheets (MSDS). The PeopleSoft (PS) software is an integrated application for General Ledger, Project Costing, Human Resources,more » Payroll, Benefits, and Training. The implementation of this set of products, as the first deliverable of the HANDI 2000 Project, is referred to as Business Management System (BMS) and MSDS.« less

Integrated risk reduction framework to improve railway hazardous materials transportation safety.

PubMed

Liu, Xiang; Saat, M Rapik; Barkan, Christopher P L

2013-09-15

Rail transportation plays a critical role to safely and efficiently transport hazardous materials. A number of strategies have been implemented or are being developed to reduce the risk of hazardous materials release from train accidents. Each of these risk reduction strategies has its safety benefit and corresponding implementation cost. However, the cost effectiveness of the integration of different risk reduction strategies is not well understood. Meanwhile, there has been growing interest in the U.S. rail industry and government to best allocate resources for improving hazardous materials transportation safety. This paper presents an optimization model that considers the combination of two types of risk reduction strategies, broken rail prevention and tank car safety design enhancement. A Pareto-optimality technique is used to maximize risk reduction at a given level of investment. The framework presented in this paper can be adapted to address a broader set of risk reduction strategies and is intended to assist decision makers for local, regional and system-wide risk management of rail hazardous materials transportation. Copyright © 2013 Elsevier B.V. All rights reserved.

Material Gradients in Oxygen System Components Improve Safety

NASA Technical Reports Server (NTRS)

Forsyth, Bradley S.

2011-01-01

Oxygen system components fabricated by Laser Engineered Net Shaping (TradeMark) (LENS(TradeMark)) could result in improved safety and performance. LENS(TradeMark) is a near-net shape manufacturing process fusing powdered materials injected into a laser beam. Parts can be fabricated with a variety of elemental metals, alloys, and nonmetallic materials without the use of a mold. The LENS(TradeMark) process allows the injected materials to be varied throughout a single workpiece. Hence, surfaces exposed to oxygen could be constructed of an oxygen-compatible material while the remainder of the part could be one chosen for strength or reduced weight. Unlike conventional coating applications, a compositional gradient would exist between the two materials, so no abrupt material boundary exists. Without an interface between dissimilar materials, there is less tendency for chipping or cracking associated with thermal-expansion mismatches.

Generalized railway tank car safety design optimization for hazardous materials transport: addressing the trade-off between transportation efficiency and safety.

PubMed

Saat, Mohd Rapik; Barkan, Christopher P L

2011-05-15

North America railways offer safe and generally the most economical means of long distance transport of hazardous materials. Nevertheless, in the event of a train accident releases of these materials can pose substantial risk to human health, property or the environment. The majority of railway shipments of hazardous materials are in tank cars. Improving the safety design of these cars to make them more robust in accidents generally increases their weight thereby reducing their capacity and consequent transportation efficiency. This paper presents a generalized tank car safety design optimization model that addresses this tradeoff. The optimization model enables evaluation of each element of tank car safety design, independently and in combination with one another. We present the optimization model by identifying a set of Pareto-optimal solutions for a baseline tank car design in a bicriteria decision problem. This model provides a quantitative framework for a rational decision-making process involving tank car safety design enhancements to reduce the risk of transporting hazardous materials. Copyright © 2011 Elsevier B.V. All rights reserved.

Environmental Assessment: Armory Addition to CATM with Parking at Grand Forks AFB, North Dakota

DTIC Science & Technology

2005-07-01

Term MBTA Migratory Bird Treaty Act MFH Military Family Housing mph Miles Per Hour MSDS Material Safety Data Sheet MSL Mean Sea Level μg/m 3...emergent aquatic plants, green algae, diatoms, diverse invertebrate animals such as sponges, flatworms, nematode worms, segmented worms, snails, clams, and...base is relatively flat; with elevations ranging from 880 to 920 ft mean sea level (MSL) and averaging about 890 ft MSL. The land slopes to the

[Hazardous materials and work safety in veterinary practice. 1: Hazardous material definition and characterization, practice documentation and general rules for handling].

PubMed

Sliwinski-Korell, A; Lutz, F

1998-04-01

In the last years the standards for professional handling of hazardous material as well as health and safety in the veterinary practice became considerably more stringent. This is expressed in various safety regulations, particularly the decree of hazardous material and the legislative directives concerning health and safety at work. In part 1, a definition based on the law for hazardous material is given and the potential risks are mentioned. The correct documentation regarding the protection of the purchase, storage, working conditions and removal of hazardous material and of the personal is explained. General rules for the handling of hazardous material are described. In part 2, particular emphasis is put on the handling of flammable liquids, disinfectants, cytostatica, pressurised gas, liquid nitrogen, narcotics, mailing of potentially infectious material and safe disposal of hazardous waste. Advice about possible unrecognized hazards and references is also given.

48 CFR 52.223-3 - Hazardous Material Identification and Material Safety Data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... offeror is the actual manufacturer of these items. Failure to submit the Material Safety Data Sheet prior... data. (f) Neither the requirements of this clause nor any act or failure to act by the Government shall... resistant envelope. [56 FR 55375, Oct. 25, 1991, as amended at 60 FR 34740, July 3, 1995; 62 FR 238, Jan. 2...

Workplace Bullying as a Risk Factor for Musculoskeletal Disorders: The Mediating Role of Job-Related Psychological Strain

PubMed Central

Vignoli, Michela; Guglielmi, Dina; Balducci, Cristian; Bonfiglioli, Roberta

2015-01-01

Workplace bullying is considered by the European Agency for Safety and Health at Work one of the emerging psychosocial risk factors that could negatively affect workers' health. Thus, the aim of this study was to analyze the process that leads from bullying to negative health (such as musculoskeletal disorders (MSDs)), testing the mediating role of job-related strain. Data were collected on 512 workers (62.9% female; mean age = 43.6 years) of a retail chain who filled in a self-report questionnaire after a one-hour training session on work-related stress. Data analyses were performed controlling for potentially confounding variables (i.e., gender, age, organizational role, type of contract, and perceived physical job demands). Preacher and Hayes analytical approach was used to test the indirect relationship between bullying and MSDs. Results showed that work-related strain mediates the relationship between bullying and MSDs considered (low back, upper back, and neck) except for MSDs of the shoulders. Our study confirms the role played by bullying and job-related strain in determining workers' MSDs. PMID:26557693

Workplace Bullying as a Risk Factor for Musculoskeletal Disorders: The Mediating Role of Job-Related Psychological Strain.

PubMed

Vignoli, Michela; Guglielmi, Dina; Balducci, Cristian; Bonfiglioli, Roberta

2015-01-01

Workplace bullying is considered by the European Agency for Safety and Health at Work one of the emerging psychosocial risk factors that could negatively affect workers' health. Thus, the aim of this study was to analyze the process that leads from bullying to negative health (such as musculoskeletal disorders (MSDs)), testing the mediating role of job-related strain. Data were collected on 512 workers (62.9% female; mean age = 43.6 years) of a retail chain who filled in a self-report questionnaire after a one-hour training session on work-related stress. Data analyses were performed controlling for potentially confounding variables (i.e., gender, age, organizational role, type of contract, and perceived physical job demands). Preacher and Hayes analytical approach was used to test the indirect relationship between bullying and MSDs. Results showed that work-related strain mediates the relationship between bullying and MSDs considered (low back, upper back, and neck) except for MSDs of the shoulders. Our study confirms the role played by bullying and job-related strain in determining workers' MSDs.

Small-Scale Terrorist Attacks Using Chemical and Biological Agents: An Assessment Framework and Preliminary Comparisons

DTIC Science & Technology

2004-05-20

Unknown Cholera ( Vibrio cholerae ) + — — — + Unknown Salmonella Typhimurium + — + — — Unknown Typhoid fever (Salmonella Typhi) + O — — — Unknown... Cholera bb ( Vibrio cholerae ) Cholera occurs in many of the developing countries of Africa and Asia, especially where sanitary conditions are not optimal...Safety Data Sheet - Infectious Substances for Vibrio cholerae , found online at [http://www.hc-sc.gc.ca/pphb-dgspsp/msds-ftss/msds164e.html]; D. Hank

Ensuring Adequate Health and Safety Information for Decision Makers during Large-Scale Chemical Releases

NASA Astrophysics Data System (ADS)

Petropoulos, Z.; Clavin, C.; Zuckerman, B.

2015-12-01

The 2014 4-Methylcyclohexanemethanol (MCHM) spill in the Elk River of West Virginia highlighted existing gaps in emergency planning for, and response to, large-scale chemical releases in the United States. The Emergency Planning and Community Right-to-Know Act requires that facilities with hazardous substances provide Material Safety Data Sheets (MSDSs), which contain health and safety information on the hazardous substances. The MSDS produced by Eastman Chemical Company, the manufacturer of MCHM, listed "no data available" for various human toxicity subcategories, such as reproductive toxicity and carcinogenicity. As a result of incomplete toxicity data, the public and media received conflicting messages on the safety of the contaminated water from government officials, industry, and the public health community. Two days after the governor lifted the ban on water use, the health department partially retracted the ban by warning pregnant women to continue avoiding the contaminated water, which the Centers for Disease Control and Prevention deemed safe three weeks later. The response in West Virginia represents a failure in risk communication and calls to question if government officials have sufficient information to support evidence-based decisions during future incidents. Research capabilities, like the National Science Foundation RAPID funding, can provide a solution to some of the data gaps, such as information on environmental fate in the case of the MCHM spill. In order to inform policy discussions on this issue, a methodology for assessing the outcomes of RAPID and similar National Institutes of Health grants in the context of emergency response is employed to examine the efficacy of research-based capabilities in enhancing public health decision making capacity. The results of this assessment highlight potential roles rapid scientific research can fill in ensuring adequate health and safety data is readily available for decision makers during large

Safety by design of printed multilayer materials intended for food packaging.

PubMed

Domeño, Celia; Aznar, Margarita; Nerín, Cristina; Isella, Francesca; Fedeli, Mauro; Bosetti, Osvaldo

2017-07-01

Printing inks are commonly used in multilayer plastics materials used for food packaging, and compounds present in inks can migrate to the food either by diffusion through the multilayers or because of set-off phenomena. To avoid this problem, the right design of the packaging is crucial. This paper studies the safety by design of multilayer materials. First, the migration from four different multilayers manufactured using polyethylene terephthalate (PET), aluminium (Al) and polyethylene (PE) was determined. The structural differences among materials such as the presence of inks or lacquer coatings as well as the differences in layers position allowed the study of a safety-by-design approach. Sixty-nine different compounds were detected and identified; 49 of them were not included in the positive list of Regulation EU/10/2011 or in Swiss legislation and 15 belong to Cramer class III, which means that they have a theoretical high toxicity. Some of the compounds related to ink composition were pyrene, a compound commercially used to make dyes and dye precursors and the antioxidant Irganox 1300. The application of external lacquers decreased the concentration of some migrants but also brought the potential for new migrants coming from its composition. A final risk assessment of the material allowed evaluating food safety for different food simulants and confirm it.

Infection as a Background to Safety: Source Material for Teaching.

ERIC Educational Resources Information Center

Wyatt, H. V.

1986-01-01

Offers selections from papers which illustrate accidents, epidemics, and bad practices which could be used as background material for lessons on laboratory safety. Advocates the need for instruction on pathogenicity and infectivity. (ML)

Production roll out plan for HANDI 2000 business management system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, D.E.

The Hanford Data Integration 2000 (HANDI 2000) Project will result in an integrated and comprehensive set of functional applications containing core information necessary to support the Project Hanford Management Contract (PHMC). It is based on the Commercial-Off-The-Shelf (COTS) product solution with commercially proven business processes. The COTS product solution set, of Passport (PP) and PeopleSoft (PS) software, supports finance, supply, human resources, and payroll activities under the current PHMC direction. The PP software is an integrated application for Accounts Payable, Contract Management, Inventory Management, Purchasing and Material Safety Data Sheets (MSDS). The PS software is an integrated application for Projects,more » General Ledger, Human Resources Training, Payroll, and Base Benefits. This set of software constitutes the Business Management System (BMS) and MSDS, a subset of the HANDI 2000 suite of systems. The primary objective of the Production Roll Out Plan is to communicate the methods and schedules for implementation and roll out to end users of BMS.« less

32 CFR 643.22 - Policy-Public safety: Requirement for early identification of lands containing dangerous materials.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Policy-Public safety: Requirement for early identification of lands containing dangerous materials. 643.22 Section 643.22 National Defense Department of...—Public safety: Requirement for early identification of lands containing dangerous materials. (a) DA will...

32 CFR 643.22 - Policy-Public safety: Requirement for early identification of lands containing dangerous materials.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 4 2011-07-01 2011-07-01 false Policy-Public safety: Requirement for early identification of lands containing dangerous materials. 643.22 Section 643.22 National Defense Department of...—Public safety: Requirement for early identification of lands containing dangerous materials. (a) DA will...

Evaluation of criteria for developing traffic safety materials for Latinos.

PubMed

Streit-Kaplan, Erica L; Miara, Christine; Formica, Scott W; Gallagher, Susan Scavo

2011-03-01

This quantitative study assessed the validity of guidelines that identified four key characteristics of culturally appropriate Spanish-language traffic safety materials: language, translation, formative evaluation, and credible source material. From a sample of 190, the authors randomly selected 12 Spanish-language educational materials for analysis by 15 experts. Hypotheses included that the experts would rate materials with more of the key characteristics as more effective (likely to affect behavioral change) and rate materials originally developed in Spanish and those that utilized formative evaluation (e.g., pilot tests, focus groups) as more culturally appropriate. Although results revealed a weak association between the number of key characteristics in a material and the rating of its effectiveness, reviewers rated materials originally created in Spanish and those utilizing formative evaluation as significantly more culturally appropriate. The findings and methodology demonstrated important implications for developers and evaluators of any health-related materials for Spanish speakers and other population groups.

Occupational and Personal Determinants of Musculoskeletal Disorders among Urban Taxi Drivers in Ghana

PubMed Central

Abledu, J. K.; Offei, E. B.; Abledu, G. K.

2014-01-01

Background. There is a lack of epidemiological data on musculoskeletal disorders (MSDs) among occupational drivers in Ghana. The present study seeks to estimate the prevalence, body distribution, and occupational and personal determinants of MSDs in a sample of taxi drivers in the Accra Metropolis of Ghana. Methods. A total of 210 participants were enrolled in this cross-sectional study. All the participants were evaluated by using a semistructured questionnaire and the standardized Nordic Musculoskeletal Disorder Questionnaire. Results. The estimated prevalence of MSDs was 70.5%. The prevalence of the various MSD domains was as follows: lower back pain (34.3%), upper back pain (16.7%), neck pain (15.2%), shoulder pain (11.0%), knee pain (10.0%), hip/thigh pain (2.9%), elbow pain (4.8%), ankle/feet pain (2.4%), and wrist/hand pain (1.9%). Multiple logistic regression analysis of the data showed that participants who were employee drivers, drove taxi more than 12 hours per day or at least 5 days per week, perceived their job as stressful, and were dissatisfied with their job were at a greater risk of developing MSDs. Conclusions. These findings call for preventive strategies and safety guidelines in order to reduce the incidence of MSDs among urban taxi drivers in Ghana. PMID:27379297

Occupational and Personal Determinants of Musculoskeletal Disorders among Urban Taxi Drivers in Ghana.

PubMed

Abledu, J K; Offei, E B; Abledu, G K

2014-01-01

Background. There is a lack of epidemiological data on musculoskeletal disorders (MSDs) among occupational drivers in Ghana. The present study seeks to estimate the prevalence, body distribution, and occupational and personal determinants of MSDs in a sample of taxi drivers in the Accra Metropolis of Ghana. Methods. A total of 210 participants were enrolled in this cross-sectional study. All the participants were evaluated by using a semistructured questionnaire and the standardized Nordic Musculoskeletal Disorder Questionnaire. Results. The estimated prevalence of MSDs was 70.5%. The prevalence of the various MSD domains was as follows: lower back pain (34.3%), upper back pain (16.7%), neck pain (15.2%), shoulder pain (11.0%), knee pain (10.0%), hip/thigh pain (2.9%), elbow pain (4.8%), ankle/feet pain (2.4%), and wrist/hand pain (1.9%). Multiple logistic regression analysis of the data showed that participants who were employee drivers, drove taxi more than 12 hours per day or at least 5 days per week, perceived their job as stressful, and were dissatisfied with their job were at a greater risk of developing MSDs. Conclusions. These findings call for preventive strategies and safety guidelines in order to reduce the incidence of MSDs among urban taxi drivers in Ghana.

PRN 2012-1: Material Safety Data Sheets as Pesticide Labeling

EPA Pesticide Factsheets

This Notice updates and clarifies EPA’s determination in PRN 92-4 that a Material Safety Data Sheet that accompanies a pesticide product is considered part of the pesticide’s labeling but does not need EPA approval if it is consistent with 40CFR Part 156.

Safety issues and new rapid detection methods in traditional Chinese medicinal materials

PubMed Central

Wang, Lili; Kong, Weijun; Yang, Meihua; Han, Jianping; Chen, Shilin

2015-01-01

The safety of traditional Chinese medicine (TCM) is a major strategic issue that involves human health. With the continuous improvement in disease prevention and treatment, the export of TCM and its related products has increased dramatically in China. However, the frequent safety issues of Chinese medicine have become the ‘bottleneck’ impeding the modernization of TCM. It was proved that mycotoxins seriously affect TCM safety; the pesticide residues of TCM are a key problem in TCM international trade; adulterants have also been detected, which is related to market circulation. These three factors have greatly affected TCM safety. In this study, fast, highly effective, economically-feasible and accurate detection methods concerning TCM safety issues were reviewed, especially on the authenticity, mycotoxins and pesticide residues of medicinal materials. PMID:26579423

Avoid Workplace Injury through Ergonomics | Poster

Cancer.gov

Ergonomics is “the scientific study of people at work,” with the goal of reducing stress and eliminating injuries associated with overused muscles, bad posture, and repeated tasks, according to the Centers for Disease Control and Prevention (CDC). The Occupational Safety and Health Administration (OSHA) states that working ergonomically reduces muscle fatigue, increases productivity, and decreases the number and severity of work-related musculoskeletal disorders (MSDs). MSDs affect the muscles, nerves, and tendons, and are a leading cause of lost workdays due to injury or illness.

78 FR 69745 - Safety and Security Plans for Class 3 Hazardous Materials Transported by Rail

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-20

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Security Plans for Class 3 Hazardous Materials Transported by Rail AGENCY: Pipeline and Hazardous Materials... characterization, classification, and selection of a packing group for Class 3 materials, and the corresponding...

Ergonomic design and training for preventing work-related musculoskeletal disorders of the upper limb and neck in adults.

PubMed

Hoe, Victor C W; Urquhart, Donna M; Kelsall, Helen L; Sim, Malcolm R

2012-08-15

Work-related upper limb and neck musculoskeletal disorders (MSDs) are one of the most common occupational disorders around the world. Although ergonomic design and training are likely to reduce the risk of workers developing work-related upper limb and neck MSDs, the evidence is unclear. To assess the effects of workplace ergonomic design or training interventions, or both, for the prevention of work-related upper limb and neck MSDs in adults. We searched MEDLINE, EMBASE, the Cochrane Central Register of Controlled Trials (CENTRAL), CINAHL, AMED, Web of Science (Science Citation Index), SPORTDiscus, Cochrane Occupational Safety and Health Review Group Database and Cochrane Bone, Joint and Muscle Trauma Group Specialised Register to July 2010, and Physiotherapy Evidence Database, US Centers for Disease Control and Prevention, the National Institute for Occupational Safety and Health database, and International Occupational Safety and Health Information Centre database to November 2010. We included randomised controlled trials (RCTs) of ergonomic workplace interventions for preventing work-related upper limb and neck MSDs. We included only studies with a baseline prevalence of MSDs of the upper limb or neck, or both, of less than 25%. Two review authors independently extracted data and assessed risk of bias. We included studies with relevant data that we judged to be sufficiently homogeneous regarding the intervention and outcome in the meta-analysis. We assessed the overall quality of the evidence for each comparison using the GRADE approach. We included 13 RCTs (2397 workers). Eleven studies were conducted in an office environment and two in a healthcare setting. We judged one study to have a low risk of bias. The 13 studies evaluated effectiveness of ergonomic equipment, supplementary breaks or reduced work hours, ergonomic training, a combination of ergonomic training and equipment, and patient lifting interventions for preventing work-related MSDs of the upper

RMP Guidance for Chemical Distributors - Appendix D: OSHA Guidance on PSM

EPA Pesticide Factsheets

Guidance on the Process Safety Management standard says information (including MSDS) about chemicals, including process intermediates, must enable accurate assessment of fire/explosion characteristics, reactivity hazards, and corrosing/erosion effects.

Factors affecting the perception of whole-body vibration of occupational drivers: an analysis of posture and manual materials handling and musculoskeletal disorders

PubMed Central

Raffler, Nastaran; Ellegast, Rolf; Kraus, Thomas; Ochsmann, Elke

2016-01-01

Due to the high cost of conducting field measurements, questionnaires are usually preferred for the assessment of physical workloads and musculoskeletal disorders (MSDs). This study compares the physical workloads of whole-body vibration (WBV) and awkward postures by direct field measurements and self-reported data of 45 occupational drivers. Manual materials handling (MMH) and MSDs were also investigated to analyse their effect on drivers' perception. Although the measured values for WBV exposure were very similarly distributed among the drivers, the subjects' perception differed significantly. Concerning posture, subjects seemed to estimate much better when the difference in exposure was significantly large. The percentage of measured awkward trunk and head inclination were significantly higher for WBV-overestimating subjects than non-overestimators; 77 and 80% vs. 36 and 33%. Health complaints in terms of thoracic spine, cervical spine and shoulder–arm were also significantly more reported by WBV-overestimating subjects (42, 67, 50% vs. 0, 25, 13%, respectively). Although more MMH was reported by WBV-overestimating subjects, there was no statistical significance in this study. PMID:26114619

Hazardous material transportation safety and security field operational test final detailed test plans : executive summary

DOT National Transportation Integrated Search

2003-09-16

The objective of this Hazardous Material (HazMat) Transportation Safety and Security Field Operational Test (FOT) Final Detailed Test Plans evaluation is to measure the impact of technology solutions on the safety, security, and operational efficienc...

Ergonomic best practices in masonry: regional differences, benefits, barriers, and recommendations for dissemination.

PubMed

Hess, Jennifer; Weinstein, Marc; Welch, Laura

2010-08-01

Within construction the masonry trade has particularly high rates of musculoskeletal disorders (MSDs). A NIOSH-sponsored meeting of masonry stakeholders explored current and potential "Best Practices" for reducing MSDs in masonry and identified potential regional differences in use of practices. To verify and better understand the regional effects and other factors associated with differences in practice use, a national telephone survey of masonry contractors was conducted. The United States was divided into four regions for evaluation: Northeast, Southeast, Midwest, and West Coast. Nine practices with the potential to reduce MSDs in masonry workers were evaluated. Masonry contractors, owners, and foremen completed 183 surveys. The results verify regional differences in use of best practices in masonry. Half-weight cement bags and autoclave aerated concrete were rarely used anywhere, while lightweight block and mortar silos appear to be diffusing across the country. The Northeast uses significantly fewer best practices than other regions. This article examines reasons for regional differences in masonry best practice, and findings provide insight into use and barriers to adoption that can be used by safety managers, researchers, and other safety advocates to more effectively disseminate ergonomic solutions across the masonry industry.

Further Trends in Work-Related Musculoskeletal Disorders-A Comparison of Risk factors for Symptoms Using Quality of Work Life Data From the 2002, 2006 and 2010 General Social Survey

PubMed Central

Dick, Robert B.; Lowe, Brian; Ming-Lun, Lu; Krieg, Edward F.

2015-01-01

Objective Report trends for risk of musculoskeletal disorders (MSDs). Methods Three QWL surveys examine the risk factors for MSDs. Results Findings similar for several risk factors, but differences across the reporting years may reflect economic conditions. 2010 respondent numbers were reduced, some risk factors had pattern changes and there were gender and age differences. Trend analysis showed most significant changes were for the “Work Fast” risk factor. New 2010 “Physical Effort” item showed gender differences and items reflective of total worker health showed strong associations with “Back Pain” and “Pain in Arms.” Conclusions Intervention strategies should focus on physical exposures and psychosocial risk factors (work stress, safety climate, job satisfaction, supervisor support, work fast, work freedom, work time) that have been consistently related to reports of MSDs. Economic conditions will influence some psychosocial risk factors. PMID:26247646

Developing effective health and safety training materials for workers in beryllium-using industries.

PubMed

Mayer, A S; Brazile, W J; Erb, S A; Barker, E A; Miller, C M; Mroz, M M; Maier, L A; Van Dyke, M V

2013-07-01

Despite reduced workplace exposures, beryllium sensitization and chronic beryllium disease still occur. Effective health and safety training is needed. Through an Occupational Safety and Health Administration (OSHA) Targeted Topic Training grant and company partners, we developed a training program. Evaluation and validation included knowledge and training reaction assessments and training impact survey. We describe herein the iterative, five-pronged approach: (1) needs assessment; (2) materials development; (3) pilot-testing, evaluation, and material revisions; (4) worker training; and (5) evaluation and validation. Mean posttraining test score increased 14% (82% to 96%; P < 0.005) and were unchanged at 90-day follow-up (94%; P = 0.744). In addition, 49% reported making changes in work practices. The use of a five-pronged training program was effective and well received and resulted in improved work practices. These materials are available on the OSHA Web site.

76 FR 31507 - Domestic Licensing of Source Material-Amendments/Integrated Safety Analysis

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

... Licensing of Source Material--Amendments/Integrated Safety Analysis AGENCY: Nuclear Regulatory Commission... rule announced the availability of a draft regulatory analysis for public comment. This document... in Section XI, ``Regulatory Analysis.'' The correct ADAMS accession number is ML102380243. DATES: The...

76 FR 65779 - Office of Hazardous Materials Safety; Notice of Applications for Modification of Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of... processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR... special permit is published in accordance with Part 107 of the Federal hazardous materials transportation...

Relationship between mental workload and musculoskeletal disorders among Alzahra Hospital nurses

PubMed Central

Habibi, Ehsanollah; Taheri, Mohamad Reza; Hasanzadeh, Akbar

2015-01-01

Background: Musculoskeletal disorders (MSDs) are a serious problem among the nursing staff. Mental workload is the major cause of MSDs among nursing staff. The aim of this study was to investigate the mental workload dimensions and their association with MSDs among nurses of Alzahra Hospital, affiliated to Isfahan University of Medical Sciences. Materials and Methods: This descriptive cross-sectional study was conducted on 247 randomly selected nurses who worked in the Alzahra Hospital in Isfahan, Iran in the summer of 2013. The Persian version of National Aeronautics and Space Administration Task Load Index (NASA-TLX) (measuring mental load) specialized questionnaire and Cornell Musculoskeletal Discomfort Questionnaire (CMDQ) was used for data collection. Data were collected and analyzed by Pearson correlation coefficient and Spearman correlation coefficient tests in SPSS 20. Results: Pearson and Spearman correlation tests showed a significant association between the nurses’ MSDs and the dimensions of workload frustration, total workload, temporal demand, effort, and physical demand (r = 0.304, 0.277, 0.277, 0.216, and 0.211, respectively). However, there was no significant association between the nurses’ MSDs and the dimensions of workload performance and mental demand (P > 0.05). Conclusions: The nurses’ frustration had a direct correlation with MSDs. This shows that stress is an inseparable component in hospital workplace. Thus, reduction of stress in nursing workplace should be one of the main priorities of hospital managers. PMID:25709683

Safety and Health Instructional Materials for Vocational Education--A State of the Art Report.

ERIC Educational Resources Information Center

Hull, Daniel M.; Lube, Bruce M.

This report details Task D (of a seventeen-task project), which identified safety and health concepts, knowledge, and skills included in print and non-print materials designed to develop performance outcomes needed by employers and employees. (The project intends to develop performance-based modularized instructional materials for teaching job…

Training survey -- educational profile for Hanford HANDI 2000 project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, D.

Fluor Daniel Hanford, Inc. (FDH) is currently adopting streamlined business processes through integrated software solutions. Replacing the legacy software (current/replacement systems, attached) also avoids significant maintenance required to resolve Year 2000 issues. This initiative is being referred to as `HANDI 2000`. The software being implemented in the first phase of this project includes Indus International`s PASSPORT Software, Peoplesoft and Primavera P3 Software. The project, which encompasses all the system replacements that will occur, has been named `HANDI 2000.` The PASSPORT applications being implemented are Inventory Management, Purchasing, Contract Management, Accounts Payable, and MSDS (Material Safety Data Sheets).

Materials Safety Data Sheets: the basis for control of toxic chemicals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ketchen, E.E.; Porter, W.E.

1979-09-01

The Material Safety Data Sheets contained in this volume are the basis for the Toxic Chemical Control Program developed by the Industrial Hygiene Department, Health Division, ORNL. The three volumes are the update and expansion of ORNL/TM-5721 and ORNL/TM-5722 Material Safety Data Sheets: The Basis for Control of Toxic Chemicals, Volume I and Volume II. As such, they are a valuable adjunct to the data cards issued with specific chemicals. The chemicals are identified by name, stores catalog number where appropriate, and sequence numbers from the NIOSH Registry of Toxic Effects of Chemical Substances, 1977 Edition, if available. The datamore » sheets were developed and compiled to aid in apprising the employees of hazards peculiar to the handling and/or use of specific toxic chemicals. Space limitation necessitate the use of descriptive medical terms and toxicological abbreviations. A glossary and an abbreviation list were developed to define some of those sometimes unfamiliar terms and abbreviations. The page numbers are keyed to the catalog number in the chemical stores at ORNL.« less

Materials Safety Data Sheets: the basis for control of toxic chemicals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ketchen, E.E.; Porter, W.E.

The Material Safety Data Sheets contained in this volume are the basis for the Toxic Chemical Control Program developed by the Industrial Hygiene Department, Health Division, ORNL. The three volumes are the update and expansion of ORNL/TM-5721 and ORNL/TM-5722 Material Safety Data Sheets: The Basis for Control of Toxic Chemicals, Volume I and Volume II. As such, they are a valuable adjunct to the data cards issued with specific chemicals. The chemicals are identified by name, stores catalog number where appropriate, and sequence numbers from the NIOSH Registry of Toxic Effects of Chemical Substances, 1977 Edition, if available. The datamore » sheets were developed and compiled to aid in apprising the employees of hazards peculiar to the handling and/or use of specific toxic chemicals. Space limitation necessitate the use of descriptive medical terms and toxicological abbreviations. A glossary and an abbreviation list were developed to define some of those sometimes unfamiliar terms and abbreviations. The page numbers are keyed to the catalog number in the chemical stores at ORNL.« less

76 FR 2950 - Office of Hazardous Materials Safety; Notice of Applications for Modification of Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-18

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of... processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR... 107 of the Federal hazardous materials transportation law (49 U.S.C. 5117(b); 49 CFR 1.53(b)). Issued...

32 CFR 643.22 - Policy-Public safety: Requirement for early identification of lands containing dangerous materials.

Code of Federal Regulations, 2013 CFR

2013-07-01

... identification of lands containing dangerous materials. 643.22 Section 643.22 National Defense Department of...—Public safety: Requirement for early identification of lands containing dangerous materials. (a) DA will... lands by explosives, military chemical or other dangerous materials. (c) Procedures with respect to...

32 CFR 643.22 - Policy-Public safety: Requirement for early identification of lands containing dangerous materials.

Code of Federal Regulations, 2014 CFR

2014-07-01

... identification of lands containing dangerous materials. 643.22 Section 643.22 National Defense Department of...—Public safety: Requirement for early identification of lands containing dangerous materials. (a) DA will... lands by explosives, military chemical or other dangerous materials. (c) Procedures with respect to...

32 CFR 643.22 - Policy-Public safety: Requirement for early identification of lands containing dangerous materials.

Code of Federal Regulations, 2012 CFR

2012-07-01

... identification of lands containing dangerous materials. 643.22 Section 643.22 National Defense Department of...—Public safety: Requirement for early identification of lands containing dangerous materials. (a) DA will... lands by explosives, military chemical or other dangerous materials. (c) Procedures with respect to...

Toxic substances registry system: Index of material safety data sheets

NASA Technical Reports Server (NTRS)

1991-01-01

The Material Safety Data Sheets (MSDSs) listed in this index reflect product inventories and associated MSDSs which have been submitted to the Toxic Substance Registry database maintained by the Base Operations Contractor at the Kennedy Space Center. The purpose of this index is to provide a means to access information on the hazards associated with the toxic and otherwise hazardous chemicals stored and used at the Kennedy Space Center.

76 FR 44865 - Domestic Licensing of Source Material-Amendments/Integrated Safety Analysis

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-27

... NUCLEAR REGULATORY COMMISSION 10 CFR Part 40 RIN 3150-AI50 [NRC-2009-0079 and NRC-2011-0080] Domestic Licensing of Source Material--Amendments/Integrated Safety Analysis AGENCY: Nuclear Regulatory Commission. ACTION: Extension of public comment period and public meeting. SUMMARY: The U.S. Nuclear...

Gender involvement in manual material handling (mmh) tasks in agriculture and technology intervention to mitigate the resulting musculoskeletal disorders.

PubMed

Singh, Suman; Sinwal, Neelima; Rathore, Hemu

2012-01-01

The lifting and carrying of loads in agriculture on small landholdings are unavoidable. Rural communities often lack access to appropriate technologies which may result in various health hazards. The objective was to study gender participation in agricultural activities involving manual material handling tasks, to assess MSDs experienced in various MMH tasks and to evaluate traditional method and designed technology. The study was conducted on 100 agricultural workers. Data on gender participation in MMH tasks in household, animal husbandry and agriculture and resulting MSDs was gathered. Pre and post assessment of technology intervention was done for NIOSH Lifting Index, QEC, and RPE. The results revealed greater susceptibility of females to musculoskeletal problems in most of the household and animal husbandry tasks. The hand trucks designed were pushing type with power grasp handle. The respondents were advised to carry 5 kg of weight per lift instead of lifting more weight in one lift/minute while filling the hand truck. By decreasing the weight and increasing the number of lifts per minute the respondents were seen falling in green zone indicating significant reduction in NIOSH lifting index. QEC scores concluded that for filling the hand truck 5 kg of weight should be carried to keep the exposure level low.

Are we failing to communicate? Internet-based patient education materials and radiation safety.

PubMed

Hansberry, David R; Ramchand, Tekchand; Patel, Shyam; Kraus, Carl; Jung, Jin; Agarwal, Nitin; Gonzales, Sharon F; Baker, Stephen R

2014-09-01

Patients frequently turn to the Internet when seeking answers to healthcare related inquiries including questions about the effects of radiation when undergoing radiologic studies. We investigate the readability of online patient education materials concerning radiation safety from multiple Internet resources. Patient education material regarding radiation safety was downloaded from 8 different websites encompassing: (1) the Centers for Disease Control and Prevention, (2) the Environmental Protection Agency, (3) the European Society of Radiology, (4) the Food and Drug Administration, (5) the Mayo Clinic, (6) MedlinePlus, (7) the Nuclear Regulatory Commission, and (8) the Society of Pediatric Radiology. From these 8 resources, a total of 45 articles were analyzed for their level of readability using 10 different readability scales. The 45 articles had a level of readability ranging from 9.4 to the 17.2 grade level. Only 3/45 (6.7%) were written below the 10th grade level. No statistical difference was seen between the readability level of the 8 different websites. All 45 articles from all 8 websites failed to meet the recommendations set forth by the National Institutes of Health and American Medical Association that patient education resources be written between the 3rd and 7th grade level. Rewriting the patient education resources on radiation safety from each of these 8 websites would help many consumers of healthcare information adequately comprehend such material. Copyright © 2014. Published by Elsevier Ireland Ltd.

77 FR 69927 - Safety Advisory Notice: Safety Advisory for Shippers and Carriers of Air Bags

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Air Bags AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Safety... Administrator for Hazardous Materials Safety, Pipeline and Hazardous Materials Safety Administration. [FR Doc...

Space Systems - Safety and Compatibility of Materials - Method to Determine the Flammability Thresholds of Materials

NASA Technical Reports Server (NTRS)

Hirsch, David

2009-01-01

Spacecraft fire safety emphasizes fire prevention, which is achieved primarily through the use of fire-resistant materials. Materials selection for spacecraft is based on conventional flammability acceptance tests, along with prescribed quantity limitations and configuration control for items that are non-pass or questionable. ISO 14624-1 and -2 are the major methods used to evaluate flammability of polymeric materials intended for use in the habitable environments of spacecraft. The methods are upward flame-propagation tests initiated in static environments and using a well-defined igniter flame at the bottom of the sample. The tests are conducted in the most severe flaming combustion environment expected in the spacecraft. The pass/fail test logic of ISO 14624-1 and -2 does not allow a quantitative comparison with reduced gravity or microgravity test results; therefore their use is limited, and possibilities for in-depth theoretical analyses and realistic estimates of spacecraft fire extinguishment requirements are practically eliminated. To better understand the applicability of laboratory test data to actual spacecraft environments, a modified ISO 14624 protocol has been proposed that, as an alternative to qualifying materials as pass/fail in the worst-expected environments, measures the actual upward flammability limit for the material. A working group established by NASA to provide recommendations for exploration spacecraft internal atmospheres realized the importance of correlating laboratory data with real-life environments and recommended NASA to develop a flammability threshold test method. The working group indicated that for the Constellation Program, the flammability threshold information will allow NASA to identify materials with increased flammability risk from oxygen concentration and total pressure changes, minimize potential impacts, and allow for development of sound requirements for new spacecraft and extravehicular landers and habitats

76 FR 70953 - Pipeline Safety: Safety of Gas Transmission Pipelines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part 192 [Docket ID PHMSA-2011-0023] RIN 2137-AE72 Pipeline Safety: Safety of Gas Transmission Pipelines AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION: Advance notice of...

76 FR 73570 - Pipeline Safety: Miscellaneous Changes to Pipeline Safety Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... pipeline facilities to facilitate the removal of liquids and other materials from the gas stream. These... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts... Changes to Pipeline Safety Regulations AGENCY: Pipeline and Hazardous Materials Safety Administration...

Romanian Experience for Enhancing Safety and Security in Transport of Radioactive Material - 12223

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vieru, Gheorghe

2012-07-01

The transport of Dangerous Goods-Class no.7 Radioactive Material (RAM), is an important part of the Romanian Radioactive Material Management. The overall aim of this activity is for enhancing operational safety and security measures during the transport of the radioactive materials, in order to ensure the protection of the people and the environment. The paper will present an overall of the safety and security measures recommended and implemented during transportation of RAM in Romania. Some aspects on the potential threat environment will be also approached with special referring to the low level radioactive material (waste) and NORM transportation either by roadmore » or by rail. A special attention is given to the assessment and evaluation of the possible radiological consequences due to RAM transportation. The paper is a part of the IAEA's Vienna Scientific Research Contract on the State Management of Nuclear Security Regime (Framework) concluded with the Institute for Nuclear Research, Romania, where the author is the CSI (Chief Scientific Investigator). The transport of RAM in Romania is a very sensible and complex problem taking into consideration the importance and the need of the security and safety for such activities. The Romanian Nuclear Regulatory Body set up strictly regulation and procedures according to the Recommendation of the IAEA Vienna and other international organizations. There were implemented the adequate regulation and procedures in order to keep the environmental impacts and the radiological consequences at the lower possible level and to assure the effectiveness of state nuclear security regime due to possible malicious acts in carrying out these activities including transport and the disposal site at the acceptable international levels. The levels of the estimated doses and risk expectation values for transport and disposal are within the acceptable limits provided by national and international regulations and recommendations but can

Examination of postures and frequency of musculoskeletal disorders among manual workers in Calcutta, India.

PubMed

Sarkar, Krishnendu; Dev, Samrat; Das, Tamal; Chakrabarty, Sabarni; Gangopadhyay, Somnath

2016-04-01

Manual material handling (MMH) activities require workers to adopt various awkward postures leading to the development of musculoskeletal disorders (MSD). To investigate the postures adopted during heavy load handling and the frequency of MSDs among MMH workers in Calcutta, India. We conducted a cross-sectional study with 100 MMH workers. MSD frequency was assessed via the Standardized Nordic Questionnaire. The Ovako Working Posture Assessment System (OWAS) was used to analyze working posture. We used logistic regression to predict MSD risk factors. Ninety five percent of workers reported a MSD in at least one body part in the past 12 months. According to OWAS results, 83% of the analysed work postures require immediate corrective measures for worker safety. The most harmful posture was carrying a heavy load overhead. Carrying more than 120 kg increased the odds of low back and neck pain by 4.527 and 4.555, respectively. This sample had a high frequency of reported MSDs, likely attributed to physiologically strenuous occupational activities repeated on average of 30-40 times daily. Ergonomic interventions, such as the use of handcarts, and occupational training are urgently needed.

Toxic Substances Registry System. Index of Material Safety Data Sheets

NASA Technical Reports Server (NTRS)

1994-01-01

The October 1994 revision of the KSC Toxic Substances Registry System (TSRS) Material Safety Data Sheets (MSD's) is presented. The listed MSD's which were submitted to the TSRS are maintained by the Base Operations Contractors of the Biomedical Operations and Research Office of KSC. The purpose of the index is to provide a means of accessing information on the hazards associated with the toxic and otherwise hazardous chemicals stored and used at KSC. Indices are provided for manufacturers, trademarks, and stock numbers.

Occupational Health and Safety. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

ERIC Educational Resources Information Center

Batman, Kangan; Tully, Chris

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of occupational health and safety: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with occupational safety and…

Safe Handling and Use of Flammable and Combustible Materials. Module SH-30. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on safe handling and use of flammable and combustible materials is one of 50 modules concerned with job safety and health. This module introduces the student to the hazards of flammable and combustible materials and the measures necessary to control those hazards. Following the introduction, 14 objectives (each keyed to a page…

Investigating the Chemical Safety of Household Products. Teacher's Guide [and] Student Materials.

ERIC Educational Resources Information Center

Davison, Phil J.

This document provides teaching guidelines and student material for a unit intended for use in high school science or consumer programs. Time allotment is from four to six hours of classroom time. The objective of this capsule is to investigate the chemical safety of household products by teaching students how to form a hypothesis through the…

Digging into construction: social networks and their potential impact on knowledge transfer.

PubMed

Carlan, N A; Kramer, D M; Bigelow, P; Wells, R; Garritano, E; Vi, P

2012-01-01

A six-year study is exploring the most effective ways to disseminate ideas to reduce musculoskeletal disorders (MSDs) in the construction sector. The sector was targeted because MSDs account for 35% of all lost time injuries. This paper reports on the organization of the construction sector, and maps potential pathways of communication, including social networks, to set the stage for future dissemination. The managers, health and safety specialists, union health and safety representatives, and 28 workers from small, medium and large construction companies participated. Over a three-year period, data were collected from 47 qualitative interviews. Questions were guided by the PARIHS (Promoting Action on Research Implementation in Health Services) knowledge-transfer conceptual framework and adapted for the construction sector. The construction sector is a complex and dynamic sector, with non-linear reporting relationships, and divided and diluted responsibilities. Four networks were identified that can potentially facilitate the dissemination of new knowledge: worksite-project networks; union networks; apprenticeship program networks; and networks established by the Construction Safety Association/Infrastructure Health and Safety Association. Flexible and multi-directional lines of communication must be used in this complex environment. This has implications for the future choice of knowledge transfer strategies.

Nordic dentists' opinions on the safety of amalgam and other dental restorative materials.

PubMed

Widström, E; Haugejorden, O; Sundberg, H; Birn, H

1993-08-01

The safety of amalgam and other restorative materials has caused concern among dental patients in recent years. The aim of this study was to obtain information on dentists' perceived competence in handling different filling materials and their opinions on the safety of these. A random sample of practising dentists in Denmark, Finland, Norway, and Sweden received a mail questionnaire in spring 1990. Answers were received from 1732 dentists (65%). The study showed that the respondents believed that their theoretic knowledge and clinical skills were generally at a high level regarding restorative materials. The risks of the side-effects of gold, ceramic materials, and glass ionomer were considered to be low by about 90% of the respondents. Amalgam was considered to be significantly more hazardous by the Swedish respondents than the others. Interestingly, composite was considered to be associated with a high risk of side-effects by about half of the dentists in all Nordic countries. The dentists' opinions were not found to be greatly influenced by their sex, age, or place of residence but rather by their country and service sector. Against the background of the present lack of scientific evidence on the hazardousness of amalgam or other restorative materials for patients' general health, these findings indicate that dentists are influenced by discussions in the mass media about dental treatment and materials and, of course, by the guidelines given by the health authorities in their own countries. Few dentists were shown to be concerned about occupational risks associated with the use of amalgam, and they had not had their own amalgam fillings replaced.(ABSTRACT TRUNCATED AT 250 WORDS)

Persuasive appeals in road safety communication campaigns: Theoretical frameworks and practical implications from the analysis of a decade of road safety campaign materials.

PubMed

Guttman, Nurit

2015-11-01

Communication campaigns are employed as an important tool to promote road safety practices. Researchers maintain road safety communication campaigns are more effective when their persuasive appeals, which are central to their communicative strategy, are based on explicit theoretical frameworks. This study's main objectives were to develop a detailed categorization of persuasive appeals used in road safety communication campaigns that differentiate between appeals that appear to be similar but differ conceptually, and to indicate the advantages, limitations and ethical issues associated with each type, drawing on behavior change theories. Materials from over 300 campaigns were obtained from 41 countries, mainly using road safety organizations' websites. Drawing on the literature, five types of main approaches were identified, and the analysis yielded a more detailed categorizations of appeals within these general categories. The analysis points to advantages, limitations, ethical issues and challenges in using different types of appeals. The discussion summarizes challenges in designing persuasive-appeals for road safety communication campaigns. Copyright © 2015 Elsevier Ltd. All rights reserved.

76 FR 303 - Pipeline Safety: Safety of On-Shore Hazardous Liquid Pipelines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-04

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part 195 [Docket ID PHMSA-2010-0229] RIN 2137-AE66 Pipeline Safety: Safety of On-Shore Hazardous Liquid Pipelines AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice of...

Proceedings of the NASA Conference on Materials for Improved Fire Safety

NASA Technical Reports Server (NTRS)

1970-01-01

The Manned Spacecraft Center was pleased to host the NASA Conference on Materials for Improved Fire Safety which was held on May 6 and 7, 1970. This document is a compilation of papers presented at the conference and represents the culmination of several years of effort by NASA and industry which was directed toward the common objective of minimizing the fire hazard in manned spacecraft and in some other related areas. One of the more serious problem areas in the Apollo program was the flammability of nonmetallic materials. The effective and timely solution of this problem area resulted from much of the effort reported herein and contributed greatly toward the successful achievement of landing men on the moon and returning them safely to earth.

75 FR 45591 - Pipeline Safety: Notice of Technical Pipeline Safety Advisory Committee Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-03

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Committee Meetings AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION... safety standards, risk assessments, and safety policies for natural gas pipelines and for hazardous...

Fire Safety Aspects of Polymeric Materials. Volume 6. Aircraft. Civil and Military

DTIC Science & Technology

1977-01-01

resistance of the existing Polyurethane foam- based seating sys- tems be improved through design, construction, and selection of covering materials. 12. A...aircraft interiors under real fire conditions. To provide the data base for developing improved fire safety standards for aircraft, four types of...the determination of immobilizing effect was based on performance in the swimming test, a simple exercise method also favored by Kimmerle to provide

Aromatase inhibitors associated musculoskeletal disorders and bone fractures in postmenopausal breast cancer patients: a result from Chinese population.

PubMed

Xu, Lu; Wang, Jue; Xue, Dan-Dan; He, Wei

2014-09-01

As the prognosis of early breast cancer patients improves, the long-term safety of aromatase inhibitors (AIs) is increasingly important. In the present study, we retrospectively investigated the incidences of musculoskeletal disorders (MSDs) and bone fractures in a cohort of Chinese postmenopausal patients with breast cancer. Data of postmenopausal patients with breast cancer were collected. Among which, 70 patients received AIs therapy (median follow-up of 32.5 months), 52 patients received tamoxifen (TAM), and 89 patients received no endocrine therapy (NE). Baseline characteristics, incidence of MSDs and bone fractures were analyzed and compared. When compared with NE group (40.4 %, 36/89), more patients in AIs group developed MSDs (72.9 %, 51/70, adjusted odds ratio (AOR) = 3.30, 95 % confidence interval (CI) = 1.59-6.88, P = 0.001). But no difference was found between TAM group (36.5 %, 19/52, AOR = 0.70, 95 % CI = 0.32-1.52, P = 0.372) and NE group. About 39.7 months after initial AIs therapy, nine patients in AI group developed bone fractures in different sites, and the bone fracture rate was significantly increased (12.9 %, 9/70, adjusted hazard ratio (AHR) = 20.08, 95 % CI = 1.72-234.08, P = 0.017) in comparison with NE group (1.1 %, 1/89). Moreover, the bone fracture rate of TAM group was not different from NE group (1.9 %, 1/52, AHR = 2.64, 95 % CI = 0.14-48.73, P = 0.513). AIs therapy may induce increased rates of MSDs and bone fractures in Chinese population of postmenopausal breast cancer patients, whereas TAM therapy did not help reduce the incidences of MSDs and bone fractures.

Work-Related Biomechanical Exposure and Job Strain as Separate and Joint Predictors of Musculoskeletal Diseases: A 28-Year Prospective Follow-up Study.

PubMed

Prakash, K C; Neupane, Subas; Leino-Arjas, Päivi; von Bonsdorff, Mikaela B; Rantanen, Taina; von Bonsdorff, Monika E; Seitsamo, Jorma; Ilmarinen, Juhani; Nygård, Clas-Håkan

2017-12-01

We investigated how work-related biomechanical exposure and job strain in midlife separately and jointly predicted back and degenerative musculoskeletal diseases (MSDs). A total of 6,257 employees participated in the Finnish Longitudinal Study on Aging Municipal Employees (FLAME) in 1981 and were followed up for 28 years. Risk ratios and the relative excessive risk due to interaction and 95% confidence intervals were modeled for separate and joint prediction estimates, respectively. After adjustment for confounders, job strain predicted degenerative MSDs among women after 4 and 11 years of follow-up. After 11 years, both exposures predicted both types of MSDs among men. Joint exposure predicted both types of MSDs after 4 years among women (for back MSDs, risk ratio (RR) = 1.58, 95% confidence interval (CI): 1.15, 2.18; for degenerative MSDs, RR = 1.59, 95% CI: 1.21, 2.07) and men (for back MSDs, RR = 1.50, 95% CI: 1.05, 2.15; for degenerative MSDs, RR = 1.61, 95% CI: 1.16, 2.22) and both types of MSDs after 11 years (for back MSDs, RR = 1.72, 95% CI: 1.21, 2.43; for degenerative MSDs, RR = 1.68, 95% CI: 1.25, 2.46) among men only, but the relative excessive risk due to interaction was not significant throughout. However, after 28 years, the separate and joint exposures did not predict MSDs. Workplace interventions should be focused on reducing job strain along with biomechanical exposure for possible prevention of MSDs in working life and around the time of retirement, but there may be other pathways of onset of MSDs in old age. © The Author(s) 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

75 FR 63774 - Pipeline Safety: Safety of On-Shore Hazardous Liquid Pipelines

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-18

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Pipelines AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), Department of... Gas Pipeline Safety Act of 1968, Public Law 90-481, delegated to DOT the authority to develop...

Quality and safety aspects of meat products as affected by various physical manipulations of packaging materials.

PubMed

Lee, Keun Taik

2010-09-01

This article explores the effects of physically manipulated packaging materials on the quality and safety of meat products. Recently, innovative measures for improving quality and extending the shelf-life of packaged meat products have been developed, utilizing technologies including barrier film, active packaging, nanotechnology, microperforation, irradiation, plasma and far-infrared ray (FIR) treatments. Despite these developments, each technology has peculiar drawbacks which will need to be addressed by meat scientists in the future. To develop successful meat packaging systems, key product characteristics affecting stability, environmental conditions during storage until consumption, and consumers' packaging expectations must all be taken into consideration. Furthermore, the safety issues related to packaging materials must also be taken into account when processing, packaging and storing meat products.

76 FR 14643 - Hazardous Materials: Safety Requirements for External Product Piping on Cargo Tanks Transporting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

... for External Product Piping on Cargo Tanks Transporting Flammable Liquids AGENCY: Pipeline and...) seeking public comment on a proposal to prohibit the transportation of flammable liquids in exposed... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part...

Reprint of "Persuasive appeals in road safety communication campaigns: Theoretical frameworks and practical implications from the analysis of a decade of road safety campaign materials".

PubMed

Guttman, Nurit

2016-12-01

Communication campaigns are employed as an important tool to promote road safety practices. Researchers maintain road safety communication campaigns are more effective when their persuasive appeals, which are central to their communicative strategy, are based on explicit theoretical frameworks. This study's main objectives were to develop a detailed categorization of persuasive appeals used in road safety communication campaigns that differentiate between appeals that appear to be similar but differ conceptually, and to indicate the advantages, limitations and ethical issues associated with each type, drawing on behavior change theories. Materials from over 300 campaigns were obtained from 41 countries, mainly using road safety organizations' websites. Drawing on the literature, five types of main approaches were identified, and the analysis yielded a more detailed categorizations of appeals within these general categories. The analysis points to advantages, limitations, ethical issues and challenges in using different types of appeals. The discussion summarizes challenges in designing persuasive-appeals for road safety communication campaigns. Copyright © 2015 Elsevier Ltd. All rights reserved.

Food safety concerns deriving from the use of silver based food packaging materials.

PubMed

Pezzuto, Alessandra; Losasso, Carmen; Mancin, Marzia; Gallocchio, Federica; Piovesana, Alessia; Binato, Giovanni; Gallina, Albino; Marangon, Alberto; Mioni, Renzo; Favretti, Michela; Ricci, Antonia

2015-01-01

The formulation of innovative packaging solutions, exerting a functional antimicrobial role in slowing down food spoilage, is expected to have a significant impact on the food industry, allowing both the maintenance of food safety criteria for longer periods and the reduction of food waste. Different materials are considered able to exert the required antimicrobial activity, among which are materials containing silver. However, challenges exist in the application of silver to food contact materials due to knowledge gaps in the production of ingredients, stability of delivery systems in food matrices and health risks caused by the same properties which also offer the benefits. Aims of the present study were to test the effectiveness and suitability of two packaging systems, one of which contained silver, for packaging and storing Stracchino cheese, a typical Italian fresh cheese, and to investigate if there was any potential for consumers to be exposed to silver, via migration from the packaging to the cheese. Results did not show any significant difference in the effectiveness of the packaging systems on packaged Stracchino cheese, excluding that the active packaging systems exerted an inhibitory effect on the growth of spoilage microorganisms. Moreover, silver migrated into the cheese matrix throughout the storage time (24 days). Silver levels in cheese finally exceeded the maximum established level for the migration of a non-authorised substance through a functional barrier (Commission of the European Communities, 2009). This result poses safety concerns and strongly suggests the need for more research aimed at better characterizing the new packaging materials in terms of their potential impacts on human health and the environment.

Developing effective worker health and safety training materials: hazard awareness, identification, recognition, and control for the salon industry.

PubMed

Mayer, Annyce S; Brazile, William J; Erb, Samantha; Autenrieth, Daniel A; Serrano, Katherine; Van Dyke, Michael V

2015-05-01

In addition to formaldehyde, workers in salons can be exposed to other chemical irritants, sensitizers, carcinogens, reproductive hazards, infectious agents, ergonomic, and other physical hazards. Worker health and safety training is challenging because of current product labeling practices and the myriad of hazards portending risk for a wide variety of health effects. Through a Susan B. Harwood Targeted Topic Training grant from the Occupational Safety and Health Administration and assistance from salon development and training partners, we developed, delivered, and validated a health and safety training program using an iterative five-pronged approach. The training was well received and resulted in knowledge gain, improved workplace safety practices, and increased communication about health and safety. These training materials are available for download from the Occupational Safety and Health Administration's Susan B. Harwood Training Grant Program Web site.

76 FR 43743 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0127] Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials...

77 FR 19414 - Pipeline Safety: Public Comment on Leak and Valve Studies Mandated by the Pipeline Safety...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID... Safety, Regulatory Certainty, and Job Creation Act of 2011 AGENCY: Pipeline and Hazardous Materials... Transportation (DOT), Pipeline and Hazardous Materials Safety Administration (PHMSA) is providing an important...

Safety and Liability.

ERIC Educational Resources Information Center

Berthelot, Ronald J.; And Others

1982-01-01

This series of five articles highlights Pensacola Junior College's occupational safety course, involving simulated emergencies, Florida's standards for teacher liability, electrical safety in the classroom and laboratory, color coding for machine safety, and Florida industrial arts safety instructional materials. (SK)

Safety Control and Safety Education at Technical Institutes

NASA Astrophysics Data System (ADS)

Iino, Hiroshi

The importance of safety education for students at technical institutes is emphasized on three grounds including safety of all working members and students in their education, research and other activities. The Kanazawa Institute of Technology re-organized the safety organization into a line structure and improved safety minds of all their members and now has a chemical materials control system and a set of compulsory safety education programs for their students, although many problems still remain.

Evaluation of Work-Related Musculoskeletal Disorders and Postural Stress of Female “Jari” Workers

PubMed Central

Pal, Amitava; Dhara, Prakash C.

2017-01-01

Aims: The present investigation was aimed to assess the postural stress and the prevalence of musculoskeletal disorders (MSDs) of the “Jari” (golden thread) workers. Settings and Design: This cross-sectional study was carried out on 156 female workers in different areas of the Purba Medinipur, Paschim Medinipur, and Howrah districts of West Bengal, India. Materials and Methods: The MSDs of the workers were evaluated by modified Nordic questionnaire method. The postural pattern during work was assessed by direct observation method. The posture of Jari workers has been analyzed by OWAS, REBA, and RULA methods. The joint angle in normal and working posture was observed. Results and Conclusions: The prevalence of MSDs was very high among the workers. The major locations of body pains in Jari workers were lower back, upper back, neck, wrist, thigh, and shoulder. The occurrence of MSDs was higher in lower and higher age group than that of the middle age group. The total work shift of the workers was approximately 13 h including rest pause. The dominant postures adopted by the workers were sitting on the floor with stretched legs, sitting on the floor with folded knees, and kneeling posture. From the results of the postural analysis, the postures of the Jari workers had been categorized as stressful. There were a significant deviation between normal standing angles and working angles. From the overall study, it may be concluded that adoption of stressful postures for longer duration might be the cause of MSDs in different body parts of the Jari workers. PMID:29618913

Occupational Health and Safety. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

ERIC Educational Resources Information Center

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of occupational health and safety: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication skills needed…

The biological safety of condom material can be determined using an in vitro cell culture system.

PubMed

Motsoane, N A; Pretorius, E; Bester, M J; Becker, P J

2001-01-01

Latex products have long been recognized as a cause of latex protein allergy. The increased usage of latex gloves, with the consequent increased occurrence of latex allergies appears to have escalated with increasing awareness of the transmission of HIV-AIDS and other infections. The use of condoms as a means to prevent the transmission of STD's (sexually transmitted diseases) and HIV-AIDS has been widely promoted. Although extensive testing is done to evaluate the physical quality of condoms, no information is available regarding the biological safety of condoms. This study was undertaken to determine the effects of short-term exposure to physiological levels of condom surface material on cell viability (MTT assay) and cell growth (crystal violet assay). A direct contact cell culture testing method (FDA test method F813-83 used to evaluate the cytotoxic potential of medical materials and devices) was used. The modified test method was found to be a sensitive test system for the evaluation of the biological safety of condoms. This study reveals the importance of evaluating the biological safety of all condoms that are commercially available, because of the potential health risk that may be associated with prolonged use of certain types of condoms.

Criteria for the Research Institute for Fragrance Materials, Inc. (RIFM) safety evaluation process for fragrance ingredients.

PubMed

Api, A M; Belsito, D; Bruze, M; Cadby, P; Calow, P; Dagli, M L; Dekant, W; Ellis, G; Fryer, A D; Fukayama, M; Griem, P; Hickey, C; Kromidas, L; Lalko, J F; Liebler, D C; Miyachi, Y; Politano, V T; Renskers, K; Ritacco, G; Salvito, D; Schultz, T W; Sipes, I G; Smith, B; Vitale, D; Wilcox, D K

2015-08-01

The Research Institute for Fragrance Materials, Inc. (RIFM) has been engaged in the generation and evaluation of safety data for fragrance materials since its inception over 45 years ago. Over time, RIFM's approach to gathering data, estimating exposure and assessing safety has evolved as the tools for risk assessment evolved. This publication is designed to update the RIFM safety assessment process, which follows a series of decision trees, reflecting advances in approaches in risk assessment and new and classical toxicological methodologies employed by RIFM over the past ten years. These changes include incorporating 1) new scientific information including a framework for choosing structural analogs, 2) consideration of the Threshold of Toxicological Concern (TTC), 3) the Quantitative Risk Assessment (QRA) for dermal sensitization, 4) the respiratory route of exposure, 5) aggregate exposure assessment methodology, 6) the latest methodology and approaches to risk assessments, 7) the latest alternatives to animal testing methodology and 8) environmental risk assessment. The assessment begins with a thorough analysis of existing data followed by in silico analysis, identification of 'read across' analogs, generation of additional data through in vitro testing as well as consideration of the TTC approach. If necessary, risk management may be considered. Copyright © 2014 Elsevier Ltd. All rights reserved.

48 CFR 970.2303 - Hazardous materials identification and material safety.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF ENERGY AGENCY SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Environment, Energy and Water Efficiency, Renewable Energy Technologies, Occupational Safety and Drug-Free Work Place 970...

48 CFR 970.2303 - Hazardous materials identification and material safety.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF ENERGY AGENCY SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Environment, Energy and Water Efficiency, Renewable Energy Technologies, Occupational Safety and Drug-Free Work Place 970...

48 CFR 970.2303 - Hazardous materials identification and material safety.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF ENERGY AGENCY SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Environment, Energy and Water Efficiency, Renewable Energy Technologies, Occupational Safety and Drug-Free Work Place 970...

48 CFR 970.2303 - Hazardous materials identification and material safety.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF ENERGY AGENCY SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Environment, Energy and Water Efficiency, Renewable Energy Technologies, Occupational Safety and Drug-Free Work Place 970...

48 CFR 970.2303 - Hazardous materials identification and material safety.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF ENERGY AGENCY SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Environment, Energy and Water Efficiency, Renewable Energy Technologies, Occupational Safety and Drug-Free Work Place 970...

[Analyzing the factors of influencing the musculoskeletal disorders of greenhouse vegetable farmers].

PubMed

Dong, Hong-yun; Li, Hong-jun; Yu, Su-fang

2012-03-01

To study the prevalence of musculoskeletal disorders (MSDs) among greenhouse vegetable farmers and to explore the risk factors of MSDs. A household questionnaire survey was conducted to investigate 203 greenhouse vegetable farmers and 127 non-greenhouse vegetable farmers in February, 2011. The one-year prevalence rates of MSDs were 70.0% and 33.9% among greenhouse vegetable farmers and non-greenhouse vegetable farmers, respectively. The three main positions of MSDs in greenhouse farmers were low back, knee (s) and shoulder (s). Age, working years, body weight and usage of rolling machine were statistically associated with MSDs of greenhouse farmers, ORadj values were 1.17, 1.82, 1.08 and 0.07, respectively. The prevalence of MSDs is high in greenhouse workers. Low back pain, knee (s), and shoulder (s) disorders are the main disorders. Age, working years, body weight and usage of rolling machine are main risk factors for the development of MSDs in greenhouse farmers.

Prevalence of Work-related Musculoskeletal Symptoms among Iranian Workforce and Job Groups.

PubMed

Choobineh, Alireza; Daneshmandi, Hadi; Saraj Zadeh Fard, Seyed Kazem; Tabatabaee, Seyed Hamidreza

2016-01-01

Musculoskeletal disorders (MSDs) are known to cause occupational injuries. This study aimed to collate the existed relevant data and develop a general feature of MSDs problem among Iranian workforce. In this study, we used the raw data related to 8004 employees from 20 Iranian industrial settings distributed throughout the country. In all studies, participants were selected based on simple random sampling method, and the data were collected using demographic characteristics and Nordic MSDs questionnaires. The most prevalent MSDs symptoms were reported in the lower back (48.9%), shoulders (45.9%), neck (44.2%), upper back (43.8%), and knees (43.8%). Prevalence rates of MSDs at least in one body region were found to be the highest (90.3%) among health-care workers. Prevalence rates of MSDs symptoms in all body regions were higher among workers with dynamic activities as compared to those of workers with static activities. MSDs symptoms were common among the study population. Health-care provider and workers with dynamic activities had the highest rate of MSDs. These results merit attention in planning and implementing ergonomics interventional program in Iranian industrial settings.

NASA technical advances in aircraft occupant safety. [clear air turbulence detectors, fire resistant materials, and crashworthiness

NASA Technical Reports Server (NTRS)

Enders, J. H.

1978-01-01

NASA's aviation safety technology program examines specific safety problems associated with atmospheric hazards, crash-fire survival, control of aircraft on runways, human factors, terminal area operations hazards, and accident factors simulation. While aircraft occupants are ultimately affected by any of these hazards, their well-being is immediately impacted by three specific events: unexpected turbulence encounters, fire and its effects, and crash impact. NASA research in the application of laser technology to the problem of clear air turbulence detection, the development of fire resistant materials for aircraft construction, and to the improvement of seats and restraint systems to reduce crash injuries are reviewed.

49 CFR 238.103 - Fire safety.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Fire safety. 238.103 Section 238.103..., DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Safety Planning and General Requirements § 238.103 Fire safety. (a) Materials. (1) Materials used in constructing a passenger car or a cab of a...

Packaging and Transportation Safety

DOT National Transportation Integrated Search

1997-01-31

This Guide supplements the Department of Energy (DOE) Order, DOE O 460.1A, PACKAGING AND TRANSPORTATION SAFETY, 10-2-96, by providing clarifying material for the implementation of packaging and transportation safety of hazardous materials. DOE O 460....

Assessing the impact of waste picking on musculoskeletal disorders among waste pickers in Mumbai, India: a cross-sectional study

PubMed Central

Singh, Shrikant; Chokhandre, Praveen

2015-01-01

Objective To assess the prevalence of musculoskeletal disorders (MSDs) as well as the impact of the occupation of waste picking on complaints of MSDs among waste pickers. The study attempts to understand the risk factors for MSDs in various areas of the body. Design A cross-sectional household survey was conducted using a case-control design. The survey instrument for measuring musculoskeletal symptoms was adopted from a standardised Nordic questionnaire. The impact of the occupation of waste picking on MSDs was analysed using the propensity score matching (PSM) method. Participants The study population consisted of waste pickers (n=200) who had been working for at least a year and a control group (n=213) selected from among or living close to the same communities. Results The 12-month prevalence of MSDs was higher among waste pickers (79%) compared to controls (55%) particularly in the lower back (54–36%), knee (48–35%), upper back (40–21%) and shoulder (32–12%). Similar patterns were observed in the 12-month prevalence of MSDs which prevented normal activity inside and outside the home, particularly for the lower back (36–21%), shoulder (21–7%) and upper back (25–12%) for waste pickers and controls. Analysis of the impact of waste picking on complaints of MSDs suggests that the occupation of waste picking raises the risk of MSDs particularly in the shoulder, lower and upper back. Older age and longer duration of work are significant risk factors for MSDs. Conclusions The findings suggest a relatively higher prevalence of MSDs among waste pickers, particularly in the lower and upper back and shoulder, compared to controls. Preventive measures and treatment to minimise the burden of MSDs among waste pickers are strongly recommended. PMID:26408284

Dental ergonomics to combat musculoskeletal disorders: a review.

PubMed

Gupta, Arpit; Ankola, Anil V; Hebbal, Mamata

2013-01-01

Musculoskeletal disorders (MSDs) are significant workplace problems affecting occupational health, productivity and the careers of dental professionals. The prevalence of MSDs is on the rise for all types of dental workers. In spite of different patterns of work culture, there are parallel levels of symptoms in dentists across nations. Risk factors for MSDs are multifactorial. Symptoms appear very early in careers, with higher prevalence of MSDs even during educational training. Ergonomics improvements, health promotion and organizational interventions are necessary to reduce the risk. An interdisciplinary approach with progressive efforts should be taken to address MSDs in dental professionals.

Use of Ergonomic Measures Related to Musculoskeletal Complaints among Construction Workers: A 2-year Follow-up Study

PubMed Central

Boschman, Julitta S.; Frings-Dresen, Monique H.W.; van der Molen, Henk F.

2015-01-01

Background The physical work demands of construction work can be reduced using ergonomic measures. The aim of this study was to evaluate the use of ergonomic measures related to musculoskeletal disorders (MSDs) among construction workers. Methods A questionnaire was sent at baseline and 2 years later to 1,130 construction workers. We established (1) the proportion of workers reporting an increase in their use of ergonomic measures, (2) the proportion of workers reporting a decrease in MSDs, (3) the relative risk for an increase in the use of ergonomic measures and a decrease in MSDs, and (4) workers' knowledge and opinions about the use of ergonomic measures. Results At follow-up, response rate was 63% (713/1,130). The proportion of workers using ergonomic measures for vertical transport increased (34%, 144/419, p < 0.01); for measures regarding horizontal transport and the positioning of materials, no change was reported. The proportion of workers reporting shoulder complaints decreased (28%, 176/638, p = 0.02). A relationship between the use of ergonomic measures and MSDs was not found; 83% (581/704) of the workers indicated having sufficient knowledge about ergonomic measures. Lightening the physical load was reported to be the main reason for using them. Conclusion Only the use of ergonomic measures for vertical transport increased over a 2-year period. No relationship between the use of ergonomic measures and MSDs was found. Strategies aimed at improving the availability of ergonomic equipment complemented with individualized advice and training in using them might be the required next steps to increase the use of ergonomic measures. PMID:26106507

After-shift Musculoskeletal Disorder Symptoms in Female Workers and Work-related Factors: A Cross-sectional Study in a Seafood Processing Factory in Vietnam

PubMed Central

Tran, Thuy Thi Thu; Phan, Chinh Thi Thuy; Pham, Tuan Cong; Nguyen, Quynh Thuy

2016-01-01

Background The seafood processing industry has been developing and providing marked contribution to Vietnam's economic growth in recent years. However, information on working conditions and their impacts to workers' health in this sector, focusing on musculoskeletal problems in female workers, has been poorly documented. Objectives This paper examines the prevalence of after-shift musculoskeletal disorder symptoms (A-MSDS) and work-related factors in female workers in a seafood processing factory in Vietnam. Materials and Methods As part of a comprehensive study, a cross-sectional survey was implemented in one seafood processing factory in the center of Vietnam in 2014. A self-administered questionnaire was completed by 394 female workers to collect information about their A-MSDS state, demographic characteristics, health status and work conditions. Descriptive analysis and logistic regression were applied to describe and analyse the results. Results Nearly four-fifths of female workers experienced MSDs in at least one body part (77.7%) and 20.1% of them had MSDs in all investigated regions. The prevalence of A-MSDS in different body parts markedly varied, with the proportion of pain in the hips and lower extremities being as high as 53.3%, followed by pain in the shoulders and upper extremities (42.6%) and the neck (41.1%). A humid working environment, exposure to vibration and chemicals as well as taxing task demands and work organizations were found to significantly contribute to the increased risk of after-shift musculoskeletal disorders in female workers. Conclusion Approximately 80% of female workers in the seafood processing factory experienced musculoskeletal pains after work, especially in the hips, extremities, neck and shoulders which were contributed by work conditions and task demands. PMID:29546192

Analysis of human factors effects on the safety of transporting radioactive waste materials: Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abkowitz, M.D.; Abkowitz, S.B.; Lepofsky, M.

1989-04-01

This report examines the extent of human factors effects on the safety of transporting radioactive waste materials. It is seen principally as a scoping effort, to establish whether there is a need for DOE to undertake a more formal approach to studying human factors in radioactive waste transport, and if so, logical directions for that program to follow. Human factors effects are evaluated on driving and loading/transfer operations only. Particular emphasis is placed on the driving function, examining the relationship between human error and safety as it relates to the impairment of driver performance. Although multi-modal in focus, the widespreadmore » availability of data and previous literature on truck operations resulted in a primary study focus on the trucking mode from the standpoint of policy development. In addition to the analysis of human factors accident statistics, the report provides relevant background material on several policies that have been instituted or are under consideration, directed at improving human reliability in the transport sector. On the basis of reported findings, preliminary policy areas are identified. 71 refs., 26 figs., 5 tabs.« less

An overview of research activities on materials for nuclear applications at the INL Safety, Tritium and Applied Research facility

NASA Astrophysics Data System (ADS)

Calderoni, P.; Sharpe, J.; Shimada, M.; Denny, B.; Pawelko, B.; Schuetz, S.; Longhurst, G.; Hatano, Y.; Hara, M.; Oya, Y.; Otsuka, T.; Katayama, K.; Konishi, S.; Noborio, K.; Yamamoto, Y.

2011-10-01

The Safety, Tritium and Applied Research facility at the Idaho National Laboratory is a US Department of Energy National User Facility engaged in various aspects of materials research for nuclear applications related to fusion and advanced fission systems. Research activities are mainly focused on the interaction of tritium with materials, in particular plasma facing components, liquid breeders, high temperature coolants, fuel cladding, cooling and blanket structures and heat exchangers. Other activities include validation and verification experiments in support of the Fusion Safety Program, such as beryllium dust reactivity and dust transport in vacuum vessels, and support of Advanced Test Reactor irradiation experiments. This paper presents an overview of the programs engaged in the activities, which include the US-Japan TITAN collaboration, the US ITER program, the Next Generation Power Plant program and the tritium production program, and a presentation of ongoing experiments as well as a summary of recent results with emphasis on fusion relevant materials.

78 FR 58604 - Safety Advisory: Unauthorized Marking of Compressed Gas Cylinders

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-24

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Safety Advisory... Investigator, Eastern Region, Office of Hazardous Materials Safety, Pipeline and Hazardous Materials Safety...

Safety analysis report -- Packages LP-50 tritium package (Packaging of fissile and other radioactive materials)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gates, A.A.; McCarthy, P.G.; Edl, J.W.

1975-05-01

Elemental tritium is shipped at low pressure in a stainless steel container (LP-50) surrounded by an aluminum vessel and Celotex insulation at least 4 in. thick in a steel drum. Each package contains a large quantity (greater than a Type A quantity) of nonfissile material, as defined in AECM 0529. This report provides the details of the safety analysis performed for this type container.

78 FR 41853 - Safety Advisory Guidance: Heating Rail Tank Cars To Prepare Hazardous Material for Unloading or...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... rail tank car due to chemical self-reaction and expansion of the toluene diisocyanate matter wastes. On...: Cheryl West Freeman, Division of Engineering and Research, Pipeline and Hazardous Materials Safety... catastrophically ruptured at a transfer station at the BASF Corporation chemical facility in Freeport, Texas. The...

Electronics. Module 1: Electronic Safety. Instructor's Guide.

ERIC Educational Resources Information Center

Tharp, Bill

This guide contains instructor's materials for a three-unit secondary school course on electronic safety. The units are shop safety principles, hand tools, and alternating current safety and protection devices. The document begins with advice on its use and a cross-referenced table of instructional materials that show which materials in the guide…

[Hazardous material and safety conditions in veterinary practice. 2: Flammable liquid, disinfectants and cleansing media, cytostatics, pressurized gases, liquid nitrogen, narcotic gases, mailing of diagnostic samples, hazardous waste].

PubMed

Sliwinski-Korell, A; Lutz, F

1998-05-01

In the last years the standards for professional handling of hazardous material as well as health and safety in the veterinary practice became considerably more stringent. This is expressed in various safety regulations, particularly the decree of hazardous material and the legislative directives concerning health and safety at work. In part 1, a definition based on the law for hazardous material was given and the potential risks were mentioned. The correct documentation regarding the protection of personal and the purchase, storage, working conditions and removal of hazardous material was explained. General rules for the handling of hazardous material were described. In part 2, partial emphasis is put on the handling of flammable liquids, disinfectants, cytostatica, pressurised gases, liquid nitrogen, narcotics, mailing of potentially infectious material and safe disposal of hazardous waste. Advice about possible unrecognized hazards and references are also given.

Prevalence and risk factors of musculoskeletal disorders among Sri Lankan rubber tappers

PubMed Central

de Silva, Vijitha; Tharindra, Hemajith; Ostbye, Truls

2016-01-01

Background Rubber tapping exposes workers to risk factors for musculoskeletal disorders (MSDs). Objectives This cross-sectional study assessed the prevalence and factors associated with MSDs among Sri Lankan rubber tappers. Methods Questionnaires were administered to 300 rubber tappers to measure MSDs and potential associated factors. Ergonomic exposure levels were measured for 90 tappers using the Quick Exposure Check instrument. MSD prevalence and prevalence ratios were calculated using log-binomial regression. Results In the past 12 months, 66% of rubber tappers in our sample experienced an MSD. Ergonomic exposure levels were high or very high in the back (94.4%), shoulders (96.7%), and neck (83.3%). Being female, older, Tamil, working two jobs, alternating tapping hands, and depression were significantly associated with increased risk of MSDs. Conclusions MSDs are common among rubber tappers in Sri Lanka. These results suggest a need for work process modifications to prevent MSDs. PMID:27092589

Assessing musculoskeletal disorders among municipal waste loaders of Mumbai, India.

PubMed

Salve, Pradeep; Chokhandre, Praveen; Bansod, Dhananjay

2017-10-06

The study aims to assess the impact of municipal waste loading occupation upon developing musculoskeletal disorders (MSDs) and thereby disabilities among waste loaders. Additionally, the study has identified the potential risk factors raising MSDs and disabilities. A cross-sectional case-control design survey was conducted in 6 out of 24 municipal wards of Mumbai during March-September 2015. The study population consisted of municipal waste loaders (N = 180) and a control group (N = 180). The Standardized Modified Nordic questionnaire was adopted to measures the MSDs and thereby disabilities in the past 12 months. A Propensity Score Matching (PSM) method was applied to assess the impact of waste loading occupation on developing MSDs and disabilities. Waste loaders had a significantly higher risk of developing MSDs as well as disabilities than the control group particularly for low back, hip/ thigh upper back and shoulder. Propensity Score Matching results revealed that the MSDs were significantly higher among waste loaders for hip/thigh (22%), low back (19%), shoulder (18%), and upper back (15%) than matched control group. Likewise, MSDs-related disabilities were found to be significantly higher among waste loaders for low back (20%), hip/ thigh (18%) upper back (13%) and shoulder (8%) than the control group. Duration of work, substance use and mental health were found to be the potential psychosocial factors for developing the risk of MSDs and disabilities. The municipal waste loading occupation raised the risk of MSDs and related disabilities among waste loaders compared to the control group. The preventive and curative measures are strongly recommended to minimize the burden of MSDs and disabilities. Int J Occup Med Environ Health 2017;30(6):875-886. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Materials for electrochemical device safety

DOEpatents

Vissers, Daniel R.; Amine, Khalil; Thackeray, Michael M.; Kahaian, Arthur J.; Johnson, Christopher S.

2015-04-07

An electrochemical device includes a thermally-triggered intumescent material or a gas-triggered intumescent material. Such devices prevent or minimize short circuits in a device that could lead to thermal run-away. Such devices may include batteries or supercapacitors.

Job stress dimensions and their relationship to musculoskeletal disorders in Iranian nurses.

PubMed

Barzideh, M; Choobineh, A R; Tabatabaee, H R

2014-01-01

There is little data available on job stress dimensions and their relationship to musculoskeletal disorders (MSDs) among Iranian nurses. The objectives of this study were to investigate job stress dimensions and examine their relationship to MSDs among nurses of Shiraz University of Medical Sciences (SUMS) hospitals. In this cross-sectional study, 385~randomly selected nurses of SUMS participated. The Persian version of Job Content Questionnaire (P-JCQ) and Nordic MSDs questionnaire were used for data collection. Descriptive statistics and Mann-Whitney U test were applied for data analysis. Decision latitude and social support dimensions had low levels, but psychological and physical job demands as well as job insecurity dimensions had high levels among the nurses. 89.9% of the subjects experienced some form of MSDs during the last 12 months. Lower back symptoms were the most prevalent problem reported (61.8%). Physical isometric loads was the only sub-scale that had significant relationship with MSDs. In the majority of cases, subjects were exposed to high levels of job stress. MSDs prevalence was high. Based on the results, any interventional program for MSDs prevention should focus on reducing physical and psychological job demands as well as increasing decision latitudes.

Psychosocial and individual characteristics and musculoskeletal complaints among clinical laboratory workers.

PubMed

Sadeghian, Farideh; Kasaeian, Amir; Noroozi, Pirasteh; Vatani, Javad; Taiebi, Seiyed Hassan

2014-01-01

Musculoskeletal disorders (MSDs) are an important health problem among healthcare workers, including clinical laboratory ones. The aim of the present study was to investigate the prevalence of MSDs and individual and psychosocial risk factors among clinical laboratory workers. A cross-sectional study was carried out among 156 workers of 30 clinical laboratories in 3 towns of Iran. The Nordic questionnaire with individual and psychosocial risk factors was used to collect data. Multiple logistic regression analysis was performed. The prevalence of reported MSDs among the study population was 72.4% in the past 12 months. The most prevalent MSDs were pain in the lower back and neck; 42.7% and 33.3%, respectively. Significant relations were found between MSDs and age, gender, heavy work at home and job control (p < .05). MSDs among laboratory workers were high and associated with age, gender, heavy work at home and job control. More research into measuring these factors and workplace physical demands is suggested.

Postural awareness among dental students in Jizan, Saudi Arabia

PubMed Central

Kanaparthy, Aruna; Kanaparthy, Rosaiah; Boreak, Nezar

2015-01-01

Objective: The study was conducted to assess the postural awareness of dental students in Jizan, Saudi Arabia. Materials and Methods: Close-ended, self-administered questionnaires were used for data collection in the survey. The questionnaire was prepared by observing the positions of students working in the clinics and the common mistakes they make with regard to their postures. The questionnaires were distributed among the dental students who were present and reported to work in the clinics. Levels of postural awareness and the relationship between postural awareness and the degree of musculoskeletal disorder (MSD) among the students was evaluated. This study was carried out in the College of Dental Sciences and Hospital, Jizan. Statistical Analysis: The level of knowledge of postural awareness was evaluated and correlated with the presence or absence of the MSDs. Categorical variables were compared using Chi-square test. P values of less than 0.05 were considered statistically significant. Results: A total of 162 dental students from the age group of 20–25 years were included in the survey, of which 134 dentists responded (83%). When their postural awareness was evaluated, results showed that 89% of the students had poor-to-medium levels of postural awareness. The relation between postural awareness and prevalence of MSDs indicated that 75% of the students with poor awareness, 49% of the students with average awareness, and 40% of the students with good awareness have MSDs. The results were statistically significant (0.002127, which is <0.005) stating that better awareness about proper postures while working helps to minimize the risk of MSDs. Conclusion: Evaluation of levels of postural awareness showed that 21% of the students had poor postural awareness, 67% had average awareness, and 11% had good postural awareness. The analysis of results showed that those students with low-to-average postural awareness had significantly greater prevalence of MSDs. PMID

49 CFR 238.103 - Fire safety.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Fire safety. 238.103 Section 238.103... § 238.103 Fire safety. (a) Materials. (1) Materials used in constructing a passenger car or a cab of a... section at the time it was tested. (c) Fire safety analysis for procuring new passenger cars and...

49 CFR 238.103 - Fire safety.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Fire safety. 238.103 Section 238.103... § 238.103 Fire safety. (a) Materials. (1) Materials used in constructing a passenger car or a cab of a... section at the time it was tested. (c) Fire safety analysis for procuring new passenger cars and...

49 CFR 238.103 - Fire safety.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Fire safety. 238.103 Section 238.103... § 238.103 Fire safety. (a) Materials. (1) Materials used in constructing a passenger car or a cab of a... section at the time it was tested. (c) Fire safety analysis for procuring new passenger cars and...

76 FR 29333 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials... for natural gas pipelines and for hazardous liquid pipelines. Both committees were established under...

Spacecraft Fire Safety

NASA Technical Reports Server (NTRS)

Margle, Janice M. (Editor)

1987-01-01

Fire detection, fire standards and testing, fire extinguishment, inerting and atmospheres, fire-related medical science, aircraft fire safety, Space Station safety concerns, microgravity combustion, spacecraft material flammability testing, and metal combustion are among the topics considered.

Material & equipment, procurement & maintenance: Impact on blood safety.

PubMed

Emmanuel, Jean C

2010-01-01

Blood Transfusion Safety is dependent on effectively organised and managed blood services, which have adequate financial resources, skilled manpower, appropriate infrastructure and quality management systems in place. 80% of the world's population has access to 20% of the supply blood products, of which little is consistently safe. HIV highlighted the importance of blood safety. The lack of effective blood services in low human development index (LHDI), developing countries, has lead to international funding and capacity building for more than three decades. The initial strategies focused on providing HIV testing reagents to prevention transmission, however this only addresses one part of blood safety. Blood safety is not only dependent on preventing HIV transmission. In many populations there are other infectious agents, which have a higher prevalence. Ensuring the correct blood is provided to the patient depends on: well managed services with effective leadership and adequate budgets; capacity building and retention of skilled experienced staff; availability of laboratory equipment, correctly maintained; blood cold chain systems; procedures for tendering, purchasing and ensuring an unbroken supply of reagents and consumables; and quality management systems. Barriers for simplified effective tendering, procurement and contracting require urgent attention and coordination of all funding organisations to ensure an unbroken supply of reagents. Copyright 2009. Published by Elsevier Ltd.

Associations between academic stressors, reaction to stress, coping strategies and musculoskeletal disorders among college students.

PubMed

Ekpenyong, Christopher E; Daniel, Nyebuk E; Aribo, Ekpe O

2013-07-01

The adverse health effects of stress are enormous, and vary among people, probably because of differences in how stress is appraised and the strategies individuals use to cope with it. This study assessed the association between academic stress and musculoskeletal disorders (MSDs) among 1365 undergraduates. This was a cross-sectional study conducted in a Nigerian university at the beginning of the 2010/2011 academic session with the same group of participants. The Life Stress Assessment Inventory, Coping Strategies Questionnaire, and Short Musculoskeletal Function Assessment were administered as tools of data gathering. Students' stress level and associated MSDs were higher during the examination period than the pre-examination periods. Stressors were significantly associated with increased risk of MSDs in both sexes were those related to changes (odds ratio (OR) = 1.7, p = 0.002) and pressures (OR = 2.09, p = 0.001). Emotional and physiological reactions to stress were significantly associated with MSDs in both sexes, with higher odds for MSDs in females, whereas cognitive and behavioral reactions showed higher odds (though non-significant) in males. The risk of MSDs was higher in respondents who adopted avoidance and religious coping strategies compared with those who adopted active practical and distracting coping strategies. Stress among students could be significantly associated with MSDs depending on individuals' demographics, stressors, reactions to stress, and coping methods. Interventions to reduce stress-induced MSDs among students should consider these factors among others.

Safety Action; Traffic and Pedestrian Safety. A Guide for Teachers in the Elementary Schools.

ERIC Educational Resources Information Center

Department of Transportation, Washington, DC.

GRADES OR AGES: Elementary, grades 1-6. SUBJECT MATTER: Safety action, traffic and pedestrian safety. ORGANIZATION AND PHYSICAL APPEARANCE: After introductory material explaining the philosophy of the guide, the elementary school child, characteristics of children as related to safety, and the responsibility of the safety team, the guide has…

49 CFR 178.345-2 - Material and material thickness.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Material and material thickness. 178.345-2 Section... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.345-2 Material and material...

49 CFR 178.345-2 - Material and material thickness.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Material and material thickness. 178.345-2 Section... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.345-2 Material and material...

49 CFR 178.345-2 - Material and material thickness.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Material and material thickness. 178.345-2 Section... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.345-2 Material and material...

49 CFR 178.345-2 - Material and material thickness.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Material and material thickness. 178.345-2 Section... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.345-2 Material and material...

Musculoskeletal Problems in Iranian Hand-Woven Shoe-Sole Making Operation and Developing Guidelines for Workstation Design.

PubMed

Veisi, H; Choobineh, A R; Ghaem, H

2016-04-01

Musculoskeletal disorders (MSDs) are among important health problems in working population. Because of performing difficult physical activities, hand-woven shoe-sole makers are at risk of developing various types of MSDs. To determine the prevalence of musculoskeletal symptoms in different body areas of hand-woven shoe-sole makers, assess workers' postures and workstations, evaluate ergonomic and individual factors associated with MSDs, and develop guidelines for designing hand-woven shoe-sole making workstation. In this cross-sectional study, the prevalence of MSDs symptoms and their risk factors were studied among 240 hand-woven shoe-sole makers. Working posture and workstations were ergonomically assessed as well. The data were collected through interviewing and using Nordic musculoskeletal questionnaire and by direct observation of posture using RULA method. Logistic regression analysis was used to determine risk factors associated with MSDs symptoms. The prevalence and severity of MSDs symptoms were high among the study population. Ergonomic factors including daily working time, working posture, and force exertion, as well as individual factors, such as age, job tenure, and education were significantly associated with MSDs symptoms. It seems that the majority of ergonomics shortcomings originate from poorly designed workstation. Some general guidelines for designing shoe-sole making workstation are presented.

49 CFR 192.63 - Marking of materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.63 Marking of materials. (a) Except as...

75 FR 40863 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-14

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2010-0193] Pipeline Safety: Information Collection Activities AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice and request for comments. SUMMARY: In...

77 FR 74276 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2012-0302] Pipeline Safety: Information Collection Activities AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice and request for comments. SUMMARY: In...

76 FR 50539 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-15

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0136] Pipeline Safety: Information Collection Activities AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice and request for comments. SUMMARY: In...

Nanotechnology and health safety--toxicity and risk assessments of nanostructured materials on human health.

PubMed

Singh, Surya; Nalwa, Hari Singh

2007-09-01

The field of nanotechnology has recently emerged as the most commercially viable technology of this century because of its wide-ranging applications in our daily lives. Man-made nanostructured materials such as fullerenes, nanoparticles, nanopowders, nanotubes, nanowires, nanorods, nanofibers, quantum dots, dendrimers, nanoclusters, nanocrystals, and nanocomposites are globally produced in large quantities due to their wide potential applications, e.g., in skincare and consumer products, healthcare, electronics, photonics, biotechnology, engineering products, pharmaceuticals, drug delivery, and agriculture. Human exposure to these nanostructured materials is inevitable, as they can enter the body through the lungs or other organs via food, drink, and medicine and affect different organs and tissues such as the brain, liver, kidney, heart, colon, spleen, bone, blood, etc., and may cause cytotoxic effects, e.g., deformation and inhibition of cell growth leading to various diseases in humans and animals. Since a very wide variety of nanostructured materials exits, their interactions with biological systems and toxicity largely depend upon their properties, such as size, concentration, solubility, chemical and biological properties, and stability. The toxicity of nanostructured materials could be reduced by chemical approaches such by surface treatment, functionalization, and composite formation. This review summarizes the sources of various nanostructured materials and their human exposure, biocompatibility in relation to potential toxicological effects, risk assessment, and safety evaluation on human and animal health as well as on the environment.

78 FR 52820 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-26

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2013-0181] Pipeline Safety: Request for Special Permit AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION: Notice. SUMMARY: Pursuant to the Federal pipeline safety laws...

78 FR 52821 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-26

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2013-0146] Pipeline Safety: Request for Special Permit AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION: Notice. SUMMARY: Pursuant to the Federal pipeline safety laws...

Activity-Limiting Musculoskeletal Conditions in US Veterans Compared to Non-Veterans: Results from the 2013 National Health Interview Survey

PubMed Central

Hinojosa, Ramon

2016-01-01

Past military service is associated with health outcomes, both positive and negative. In this study we use the 2013 National Health Interview Survey to examine the constellation of conditions referred to as musculoskeletal disorders (MSDs) for Veterans and non-veterans with health conditions that limit their daily activities. Multivariate logistic regression analysis reveal that Veterans are more likely to report MSDs like neck and back problems, fracture bone and joint problems as an activity limiting problem compared to non-veterans. The relationship between age and reports of activity limiting MSDs is moderated by Veteran status. Veterans in this sample report more activity limiting MSDs at younger ages compared to non-veterans and fewer MSDs at older ages. This research contributes to our understanding of potentially limiting health conditions at earlier ages for Veterans. PMID:28005905

78 FR 16764 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-18

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2012-0302] Pipeline Safety: Information Collection Activities AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice and Request for Comments on a Previously...

75 FR 4610 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-28

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2009-0375] Pipeline Safety: Information Collection Activities AGENCY: Pipeline and Hazardous Materials Safety Administration. ACTION: Notice and request for comments. SUMMARY: On November 24, 2009, as...

Foot model for tracking temperature of safety boot insoles: application to different insole materials in firefighter boots.

PubMed

García-Hernández, César; Sánchez-Álvarez, Eduardo J; Huertas-Talón, José-Luis

2016-01-01

This research is based on the development of a human foot model to study the temperature conditions of a foot bottom surface under extreme external conditions. This foot model is made by combining different manufacturing techniques to enable the simulation of bones and tissues, allowing the placement of sensors on its surface to track the temperature values of different points inside a shoe. These sensors let researchers capture valuable data during a defined period of time, making it possible to compare the features of different safety boots, socks or soles, among others. In this case, it has been applied to compare different plantar insole materials, placed into safety boots on a high-temperature surface.

78 FR 10689 - Pipeline Safety: Public Forum State One-Call Exemptions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-14

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Safety, Pipeline and Hazardous Materials Safety Administration, DOT. ACTION: Notice; public forum. SUMMARY: The Pipeline and Hazardous Materials Safety Administration will sponsor a public forum on state...

Annotated Bibliography of Rail Transit Safety, 1975-1980, with Emphasis on Safety Research and Development.

DOT National Transportation Integrated Search

1981-09-01

The bibliography provides a comprehensive review of published literature concerning rail transit safety and includes 186 annotated entries. The report covers domestic and foreign material on rail transit safety and related safety research and develop...

49 CFR 193.2511 - Personnel safety.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY LIQUEFIED NATURAL GAS FACILITIES... or a means of escape. (c) Each LNG plant must be equipped with suitable first-aid material, the...

Safety analysts training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bolton, P.

The purpose of this task was to support ESH-3 in providing Airborne Release Fraction and Respirable Fraction training to safety analysts at LANL who perform accident analysis, hazard analysis, safety analysis, and/or risk assessments at nuclear facilities. The task included preparation of materials for and the conduct of two 3-day training courses covering the following topics: safety analysis process; calculation model; aerosol physic concepts for safety analysis; and overview of empirically derived airborne release fractions and respirable fractions.

The relationship between the development of musculoskeletal disorders, body mass index, and academic stress in Bahraini University students.

PubMed

Tantawy, Sayed A; Abdul Rahman, Asma; Abdul Ameer, Maryam

2017-04-01

There are many mechanisms in which stress can lead to weight gain thus high a BMI. The endocrine and inflammatory pathway can directly increase abdominal adiposity. Another way in which stress leads to weight gain is through changes in health behaviors. The study aimed to investigate the prevalence of musculoskeletal disorders (MSDs) among healthy students of Ahlia University, and to determine the relationship between the development of MSDs and academic stressors and body mass index. Self-administered questionnaires were distributed to 94 students aged 18-26 years who were enrolled at various Ahlia University colleges and met other inclusion criteria. The students responded to the standardized Nordic musculoskeletal questionnaire and the modified College Student Stress Inventory regarding musculoskeletal symptoms and academic stressors. Height and weight measurements were also obtained to determine body mass index. A total of 77.66% reported MSDs in one or more body part, with the prevalence being higher among women than among men. The 7-day prevalence of MSDs severe enough to interfere with activities of daily living was 60.64%, and 44.68% by female and male students, respectively. There was a significant relationship between academic stress and MSDs in the neck, shoulders, lower back, and hips, while the relationship between MSDs, and body mass index, academic stress, and grade point average was not significant. The prevalence of MSDs among Ahlia University students was found to be high. Apart from the positive correlation between academic stress and MSDs in certain body parts, other correlations were not significant.

75 FR 35366 - Pipeline Safety: Applying Safety Regulation to All Rural Onshore Hazardous Liquid Low-Stress Lines

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-22

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Onshore Hazardous Liquid Low-Stress Lines AGENCY: Pipeline and Hazardous Materials Safety Administration... pipelines to perform a complete ``could affect'' analysis to determine which rural low-stress pipeline...

49 CFR 193.2607 - Foreign material.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Foreign material. 193.2607 Section 193.2607 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...: FEDERAL SAFETY STANDARDS Maintenance § 193.2607 Foreign material. (a) The presence of foreign material...

49 CFR 193.2607 - Foreign material.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Foreign material. 193.2607 Section 193.2607 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...: FEDERAL SAFETY STANDARDS Maintenance § 193.2607 Foreign material. (a) The presence of foreign material...

Aetiology and risk factors of musculoskeletal disorders in physically active conscripts: a follow-up study in the Finnish Defence Forces

PubMed Central

2010-01-01

Background Musculoskeletal disorders (MSDs) are the main reason for morbidity during military training. MSDs commonly result in functional impairment leading to premature discharge from military service and disabilities requiring long-term rehabilitation. The purpose of the study was to examine associations between various risk factors and MSDs with special attention to the physical fitness of the conscripts. Methods Two successive cohorts of 18 to 28-year-old male conscripts (N = 944, median age 19) were followed for six months. MSDs, including overuse and acute injuries, treated at the garrison clinic were identified and analysed. Associations between MSDs and risk factors were examined by multivariate Cox's proportional hazard models. Results During the six-month follow-up of two successive cohorts there were 1629 MSDs and 2879 health clinic visits due to MSDs in 944 persons. The event-based incidence rate for MSD was 10.5 (95% confidence interval (CI): 10.0-11.1) per 1000 person-days. Most MSDs were in the lower extremities (65%) followed by the back (18%). The strongest baseline factors associated with MSDs were poor result in the combined outcome of a 12-minute running test and back lift test (hazard ratio (HR) 2.9; 95% CI: 1.9-4.6), high waist circumference (HR 1.7; 95% CI: 1.3-2.2), high body mass index (HR 1.8; 95% CI: 1.3-2.4), poor result in a 12-minute running test (HR 1.6; 95% CI: 1.2-2.2), earlier musculoskeletal symptoms (HR 1.7; 95% CI: 1.3-2.1) and poor school success (educational level and grades combined; HR 2.0; 95% CI: 1.3-3.0). In addition, risk factors of long-term MSDs (≥10 service days lost due to one or several MSDs) were analysed: poor result in a 12-minute running test, earlier musculoskeletal symptoms, high waist circumference, high body mass index, not belonging to a sports club and poor result in the combined outcome of the 12-minute running test and standing long jump test were strongly associated with long-term MSDs. Conclusions

76 FR 70217 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Administration [Docket No. PHMSA... OMB approval of new Information Collection. AGENCY: Pipeline and Hazardous Materials Safety... Pipeline and Hazardous Materials Safety Administration (PHMSA) published a notice in the Federal Register...

Nuclear Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silver, E G

This document is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

49 CFR 190.239 - Safety orders.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Safety orders. 190.239 Section 190.239 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY PIPELINE SAFETY PROGRAMS AND RULEMAKING...

Safety validation test equipment operation

NASA Astrophysics Data System (ADS)

Kurosaki, Tadaaki; Watanabe, Takashi

1992-08-01

An overview of the activities conducted on safety validation test equipment operation for materials used for NASA manned missions is presented. Safety validation tests, such as flammability, odor, offgassing, and so forth were conducted in accordance with NASA-NHB-8060.1C using test subjects common with those used by NASA, and the equipment used were qualified for their functions and performances in accordance with NASDA-CR-99124 'Safety Validation Test Qualification Procedures.' Test procedure systems were established by preparing 'Common Procedures for Safety Validation Test' as well as test procedures for flammability, offgassing, and odor tests. The test operation organization chaired by the General Manager of the Parts and Material Laboratory of NASDA (National Space Development Agency of Japan) was established, and the test leaders and operators in the organization were qualified in accordance with the specified procedures. One-hundred-one tests had been conducted so far by the Parts and Material Laboratory according to the request submitted by the manufacturers through the Space Station Group and the Safety and Product Assurance for Manned Systems Office.

Laboratory safety handbook

USGS Publications Warehouse

Skinner, E.L.; Watterson, C.A.; Chemerys, J.C.

1983-01-01

Safety, defined as 'freedom from danger, risk, or injury,' is difficult to achieve in a laboratory environment. Inherent dangers, associated with water analysis and research laboratories where hazardous samples, materials, and equipment are used, must be minimized to protect workers, buildings, and equipment. Managers, supervisors, analysts, and laboratory support personnel each have specific responsibilities to reduce hazards by maintaining a safe work environment. General rules of conduct and safety practices that involve personal protection, laboratory practices, chemical handling, compressed gases handling, use of equipment, and overall security must be practiced by everyone at all levels. Routine and extensive inspections of all laboratories must be made regularly by qualified people. Personnel should be trained thoroughly and repetitively. Special hazards that may involve exposure to carcinogens, cryogenics, or radiation must be given special attention, and specific rules and operational procedures must be established to deal with them. Safety data, reference materials, and texts must be kept available if prudent safety is to be practiced and accidents prevented or minimized.

76 FR 35130 - Pipeline Safety: Control Room Management/Human Factors

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-16

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts...: Control Room Management/Human Factors AGENCY: Pipeline and Hazardous Materials Safety Administration... safety standards, risk assessments, and safety policies for natural gas pipelines and for hazardous...

Genotoxicity testing approaches for the safety assessment of substances used in food contact materials prior to their authorization in the European Union.

PubMed

Bolognesi, Claudia; Castoldi, Anna F; Crebelli, Riccardo; Barthélémy, Eric; Maurici, Daniela; Wölfle, Detlef; Volk, Katharina; Castle, Laurence

2017-06-01

Food contact materials are all materials and articles intended to come directly or indirectly into contact with food. Before being included in the positive European "Union list" of authorized substances (monomers, other starting substances and additives) for plastic food contact materials, the European Food Safety Authority (EFSA) must assess their safety "in use". If relevant for risk, the safety of the main impurities, reaction and degradation products originating from the manufacturing process is also evaluated. Information on genotoxicity is always required irrespective of the extent of migration and the resulting human exposure, in view of the theoretical lack of threshold for genotoxic events. The 2008 EFSA approach, requiring the testing of food contact materials in three in vitro mutagenicity tests, though still acceptable, is now superseded by the 2011 EFSA Scientific Committee's recommendation for only two complementary tests including a bacterial gene mutation test and an in vitro micronucleus test, to detect two main genetic endpoints (i.e., gene mutations and chromosome aberrations). Follow-up of in vitro positive results depends on the type of genetic effect and on the substance's systemic availability. In this study, we provide an analysis of the data on genotoxicity testing gathered by EFSA on food contact materials for the period 1992-2015. We also illustrate practical examples of the approaches that EFSA took when evaluating "non standard" food contact chemicals (e.g., polymeric additives, oligomer or other reaction mixtures, and nanosubstances). Additionally, EFSA's experience gained from using non testing methods and/or future possibilities in this area are discussed. Environ. Mol. Mutagen. 58:361-374, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Musculoskeletal disorders in physically active conscripts: a one-year follow-up study in the Finnish Defence Forces

PubMed Central

Taanila, Henri; Suni, Jaana; Pihlajamäki, Harri; Mattila, Ville M; Ohrankämmen, Olli; Vuorinen, Petteri; Parkkari, Jari

2009-01-01

Background Musculoskeletal disorders (MSDs) are an important cause for morbidity in military service. They result in disabilities needing long-term rehabilitation and functional impairment leading to premature discharge from military service. The purpose of the study was to investigate the incidence and nature of MSDs in Finnish conscripts. Methods Two successive arrivals of 18–28-yr-old male conscripts (N = 955, median age 19) were followed for six months. MSDs, including overuse and acute injuries, treated at the garrison clinic were identified and analysed. Results During the 12-month study period there were 437 outpatient clinic visits in 955 persons. The occurrence rate was 33% during 6-month service while the event-based incidence was 3.3 per 1000 person-days. Occurrence peaked in summer months. The most common types of MSDs were low back pain (LBP, 20%), lower limb overuse injuries (16%) and sprains or strains (13%). Disorders mostly occurred in combat training in combat gear (40%) and during marching on foot or bicycle (28%). Overuse-related MSDs were more prevalent (66%) than traumatic ones (34%). One-third (34%) of the MSDs were recurrent and 66% were new ones. Disorders of the back and the knee were most frequently recurrent conditions (44% for both). Fractures, knee ligament ruptures, dislocations and muscle strains accounted for the highest number of service days lost. Twenty-four (2.5%) out of 955 conscripts were prematurely discharged due to MSDs. Conclusion Preventive measures during military service should be targeted at decreasing low back pain and lower limb overuse injuries, because these inflict the largest burden of MSDs and tend to have a chronic nature. PMID:19624829

Reducing musculoskeletal disorders among computer operators: comparison between ergonomics interventions at the workplace.

PubMed

Levanon, Yafa; Gefen, Amit; Lerman, Yehuda; Givon, Uri; Ratzon, Navah Z

2012-01-01

Typing is associated with musculoskeletal disorders (MSDs) caused by multiple risk factors. This control study aimed to evaluate the efficacy of a workplace intervention for reducing MSDs among computer workers. Sixty-six subjects with and without MSD were assigned consecutively to one of three groups: ergonomics intervention (work site and body posture adjustments, muscle activity training and exercises) accompanied with biofeedback training, the same ergonomics intervention without biofeedback and a control group. Evaluation of MSDs, body posture, psychosocial status, upper extremity (UE) kinematics and muscle surface electromyography were carried out before and after the intervention in the workplace and the motion lab. Our main hypothesis that significant differences in the reduction of MSDs will exist between subjects in the study groups and controls was confirmed (χ(2) = 13.3; p = 0.001). Significant changes were found in UE kinematics and posture as well. Both ergonomics interventions effectively reduced MSD and improved body posture. This study aimed to test the efficacy of an individual workplace intervention programme among computer workers by evaluating musculoskeletal disorders (MSDs), body posture, upper extremity kinematics, muscle activity and psychosocial factors were tested. The proposed ergonomics interventions effectively reduced MSDs and improved body posture.

Would a "one-handed" scientist lack rigor? How scientists discuss the work-relatedness of musculoskeletal disorders in formal and informal communications.

PubMed

Premji, Stephanie; Messing, Karen; Lippel, Katherine

2008-03-01

When research results concerning occupational health are expressed ambiguously, compensation and prevention can be affected. This study examined the language used by scientists to discuss the relation between work and musculoskeletal disorders (MSDs). Language regarding work and MSDs in twenty articles from two peer-reviewed journals was compared with that in 94 messages on MSDs posted by published scientists to an internet list. Almost all the articles found some link between work and MSDs. However, few articles expressed belief in such a link unambiguously in the title or abstract, and language on links was often hard for a non-health scientist to interpret. Language and methods gave excess weight to negative results. On the listserve, many scientists expressed unambiguous views on linkages between work and MSDs. Scientists must express their opinions more forthrightly if they wish their results to be used to favour prevention and to foster access to workers' compensation.

Characterizing mesh size distributions (MSDs) in thermosetting materials using a high-pressure system.

PubMed

Larché, J-F; Seynaeve, J-M; Voyard, G; Bussière, P-O; Gardette, J-L

2011-04-21

The thermoporosimetry method was adapted to determine the mesh size distribution of an acrylate thermoset clearcoat. This goal was achieved by increasing the solvent rate transfer by increasing the pressure and temperature. A comparison of the results obtained using this approach with those obtained by DMA (dynamic mechanical analysis) underlined the accuracy of thermoporosimetry in characterizing the macromolecular architecture of thermosets. The thermoporosimetry method was also used to analyze the effects of photoaging on cross-linking, which result from the photodegradation of the acrylate thermoset. It was found that the formation of a three-dimensional network followed by densification generates a modification of the average mesh size that leads to a dramatic decrease of the meshes of the polymer.

Twenty-Second National Conference on Campus Safety. Safety Monographs for Schools and Colleges. Monograph No. 35.

ERIC Educational Resources Information Center

Green, Jack N., Ed.

The papers include discussions on: (1) training techniques for safety administrators; (2) materials and services from the National Safety Council; (3) fire safety measures; (4) high-rise buildings; (5) the role of the industrial hygienist in environmental health and safety; (6) chemical waste disposal facilities; (7) a chemistry department safety…

Impact resistance of materials for guards on cutting machine tools--requirements in future European safety standards.

PubMed

Mewes, D; Trapp, R P

2000-01-01

Guards on machine tools are meant to protect operators from injuries caused by tools, workpieces, and fragments hurled out of the machine's working zone. This article presents the impact resistance requirements, which guards according to European safety standards for machine tools must satisfy. Based upon these standards the impact resistance of different guard materials was determined using cylindrical steel projectiles. Polycarbonate proves to be a suitable material for vision panels because of its high energy absorption capacity. The impact resistance of 8-mm thick polycarbonate is roughly equal to that of a 3-mm thick steel sheet Fe P01. The limited ageing stability, however, makes it necessary to protect polycarbonate against cooling lubricants by means of additional panes on both sides.

Radiological Safety Handbook.

ERIC Educational Resources Information Center

Army Ordnance Center and School, Aberdeen Proving Ground, MD.

Written to be used concurrently with the U.S. Army's Radiological Safety Course, this publication discusses the causes, sources, and detection of nuclear radiation. In addition, the transportation and disposal of radioactive materials are covered. The report also deals with the safety precautions to be observed when working with lasers, microwave…

Diesel Technology: Safety Skills. [Teacher and Student Editions.

ERIC Educational Resources Information Center

Kellum, Mary

Competency-based teacher and student materials are provided for three units on safety skills as part of a diesel technology curriculum. The units cover the following topics: general safety; workplace safety; and first aid. The materials are based on the curriculum-alignment concept of first stating the objectives, then developing instructional…

An overview of safety assessment, regulation, and control of hazardous material use at NREL

NASA Astrophysics Data System (ADS)

Nelson, B. P.; Crandall, R. S.; Moskowitz, P. D.; Fthenakis, V. M.

1992-12-01

This paper summarizes the methodology we use to ensure the safe use of hazardous materials at the National Renewable Energy Laboratory (NREL). First, we analyze the processes and the materials used in those processes to identify the hazards presented. Then we study federal, state, and local regulations and apply the relevant requirements to our operations. When necessary, we generate internal safety documents to consolidate this information. We design research operations and support systems to conform to these requirements. Before we construct the systems, we perform a semiquantitative risk analysis on likely accident scenarios. All scenarios presenting an unacceptable risk require system or procedural modifications to reduce the risk. Following these modifications, we repeat the risk analysis to ensure that the respective accident scenarios present an acceptable risk. Once all risks are acceptable, we conduct an operational readiness review (ORR). A management-appointed panel performs the ORR ensuring compliance with all relevant requirements. After successful completion of the ORR, operations can begin.

75 FR 41531 - Brookwood-Sago Mine Safety Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

... stated goals and current reporting period. objectives for improving safety. Conduct and report pre-test and post- test results of trainees. Course evaluations of trainer and training materials. The extent... pre-test and post- and improves safety. educational materials test results of the training materials...

Quantifying and Addressing the DOE Material Reactivity Requirements with Analysis and Testing of Hydrogen Storage Materials & Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khalil, Y. F.

2012-04-30

The objective of this project is to examine safety aspects of candidate hydrogen storage materials and systems being developed in the DOE Hydrogen Program. As a result of this effort, the general DOE safety target will be given useful meaning by establishing a link between the characteristics of new storage materials and the satisfaction of safety criteria. This will be accomplished through the development and application of formal risk analysis methods, standardized materials testing, chemical reactivity characterization, novel risk mitigation approaches and subscale system demonstration. The project also will collaborate with other DOE and international activities in materials based hydrogenmore » storage safety to provide a larger, highly coordinated effort.« less

Safety in the Physics Laboratory

ERIC Educational Resources Information Center

Bullen, Brother T. G.

1974-01-01

Briefly defines the legal aspects of safety. Presents prominent safety hazards and procedures that should be followed when dealing with electricity, radioactive materials, lasers, poisons, and vacuum apparatus. (GS)

Strand V: Education for Survival. Safety Education. Health Curriculum Materials. Grades 7-9.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Secondary Curriculum Development.

GRADES OR AGES: Grades 7-9. SUBJECT MATTER: Education for survival and safety education. ORGANIZATION AND PHYSICAL APPEARANCE: The guide is divided into eight sections: accident problems, safe behavior, safety in the home, safety in school, safety at work, safety in physical and recreational activities, safety in driving and walking, and safety in…

Assessment of the benefits and costs associated with the adoption of the recommended fire safety practices for rail transit materials selection

DOT National Transportation Integrated Search

1982-12-01

This report presents the results of an assessment of the benefits and costs associated with the adoption of Recommended Fire Safety Practices for Rail Transit Materials Selection for rapid rail transit and light rail transit vehicles. The potential b...

Safety Training--A Special Case?

ERIC Educational Resources Information Center

Cooper, Mark; Cotton, David

2000-01-01

Review of research on industrial training and occupational safety and health did not find materials on training safely or risk assessment for training. A study of 34 safety inspectors indicated that risk decision making and assessment are serious concerns that should be addressed in safety training. (Contains 56 references.) (SK)

Prevalence and risk factors of musculoskeletal disorders among Myanmar migrant workers in Thai seafood industries.

PubMed

Soe, Kyaw Thu; Laosee, Orapin; Limsatchapanich, Suwassa; Rattanapan, Cheerawit

2015-01-01

A cross-sectional descriptive study was conducted with self-administered questionnaires among 368 Myanmar migrant workers to investigate the prevalence of and to determine the risk factors for musculoskeletal disorders (MSDs) in the Thai seafood industry. The results showed the prevalence of MSDs was 45.1% occurring in the last 7 days. Marital status, number of dependents, other health problems, working hours, repetitive hand movements, awkward posture of wrists, prolonged standing, and manual handling of heavy loads were found to be associated with MSDs. Multiple logistic regression indicated that the workers who were married, had more than two dependents, and had more exposure to awkward wrist postures were at significantly increased risk of MSDs. The study findings suggest the need for adequate knowledge of ergonomics and for awareness campaign programs focusing on prevention of MSDs, especially low back pain, to be initiated in industries for earlier detection of symptoms among seafood processing workers.

Musculoskeletal disorders among preschool teachers: analyzing the relationships among relational demands, work meaning, and intention to leave the job.

PubMed

Converso, Daniela; Viotti, Sara; Sottimano, Ilaria; Cascio, Vincenza; Guidetti, Gloria

2018-05-22

Based on the conservation of resource (COR) theory by Hobfoll, the aim of the present study was to test whether the relationships among relational demands, work meaning, and intention to leave vary as a function of the presence of musculoskeletal disorders (MSDs). The study was cross-sectional and non-randomized. Analyses were carried out on a dataset consisting of 429 preschool teachers, who filled out a self-report questionnaire. Of them, 238 reported a MSD diagnosis and 191 were free form MSDs. As expected, among those who reported MSDs, relational demands were significantly associated to intention to leave, and this relationship was mediated by work meaning; moreover, among those free from MSDs, no significant paths among the three variables were found. In general, results showed that suffering from MSDs impairs workers' ability to face to relational demands, thus activating a spiral that encompasses diminished work meaning and intention to leave. Practical implications of results will be discussed in the paper.

Applications of nanotechnology in food packaging and food safety: barrier materials, antimicrobials and sensors.

PubMed

Duncan, Timothy V

2011-11-01

In this article, several applications of nanomaterials in food packaging and food safety are reviewed, including: polymer/clay nanocomposites as high barrier packaging materials, silver nanoparticles as potent antimicrobial agents, and nanosensors and nanomaterial-based assays for the detection of food-relevant analytes (gasses, small organic molecules and food-borne pathogens). In addition to covering the technical aspects of these topics, the current commercial status and understanding of health implications of these technologies are also discussed. These applications were chosen because they do not involve direct addition of nanoparticles to consumed foods, and thus are more likely to be marketed to the public in the short term. Published by Elsevier Inc.

78 FR 16045 - Safety Advisory: Unauthorized Marking of Compressed Gas Cylinders

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-13

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2013-0019; Notice No. 13-03] Safety Advisory: Unauthorized Marking of Compressed Gas Cylinders AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Safety Advisory...

Integrating bioassays and analytical chemistry as an improved approach to support safety assessment of food contact materials.

PubMed

Veyrand, Julien; Marin-Kuan, Maricel; Bezencon, Claudine; Frank, Nancy; Guérin, Violaine; Koster, Sander; Latado, Hélia; Mollergues, Julie; Patin, Amaury; Piguet, Dominique; Serrant, Patrick; Varela, Jesus; Schilter, Benoît

2017-10-01

Food contact materials (FCM) contain chemicals which can migrate into food and result in human exposure. Although it is mandatory to ensure that migration does not endanger human health, there is still no consensus on how to pragmatically assess the safety of FCM since traditional approaches would require extensive toxicological and analytical testing which are expensive and time consuming. Recently, the combination of bioassays, analytical chemistry and risk assessment has been promoted as a new paradigm to identify toxicologically relevant molecules and address safety issues. However, there has been debate on the actual value of bioassays in that framework. In the present work, a FCM anticipated to release the endocrine active chemical 4-nonyphenol (4NP) was used as a model. In a migration study, the leaching of 4NP was confirmed by LC-MS/MS and GC-MS. This was correlated with an increase in both estrogenic and anti-androgenic activities as measured with bioassays. A standard risk assessment indicated that according to the food intake scenario applied, the level of 4NP measured was lower, close or slightly above the acceptable daily intake. Altogether these results show that bioassays could reveal the presence of an endocrine active chemical in a real-case FCM migration study. The levels reported were relevant for safety assessment. In addition, this work also highlighted that bioactivity measured in migrate does not necessarily represent a safety issue. In conclusion, together with analytics, bioassays contribute to identify toxicologically relevant molecules leaching from FCM and enable improved safety assessment.

Knowledge on musculoskeletal diseases by the Spanish population.

PubMed

Lázaro, Pablo; Alfaro, Noelia; Méndez, José Ignacio; Garcia-Vicuña, Rosario; Jover, Juan Ángel; Sevilla, Jordi; Gabriele, Giovanna

2013-01-01

To explore knowledge on musculoskeletal-diseases (MSDs) by the Spanish population. This was a cross-sectional study of the general population (> 18 years) using a telephone survey of 1,009 subjects stratified by habitat size, age, sex, and geographic area. A structured questionnaire was used to collect information on the subjects, their general knowledge of MSDs (GK), their specific knowledge of particular MSDs (SK), and their knowledge of their social impact (KSI). Synthetic indicators of the level of knowledge were used to analyze, using univariate and multivariate models, variables associated to the level of knowledge. The KSI level ranges from medium-high (mean: 0.62 ± 0.16 out of 1), suggesting that most subjects recognize MSDs as disabling conditions which affect the ability to work and have a high personal and social cost. The GK level is intermediate (mean: 0.50 ± 0.17); 60% of subjects know something about MSDs, but 54% state that their information is poor/very poor. The SK level is low (mean: 0.18 ± 0.10), and there are some MSDs that are little known (lupus, spondylitis). Being male or retired or having a MSD is associated to a greater knowledge of MSDs. The Spanish population has a medium level of knowledge of the frequency and extent to which MSDs affect performance of activities by those who suffer them. They identify them adequately and have a GK of their symptoms, but have little information about them. The level of knowledge varies depending on social and demographic factors and on whether or not the subject has direct or indirect experience of what a MSD means. Copyright © 2012 Elsevier España, S.L. All rights reserved.

Active epidemiological surveillance of musculoskeletal disorders in a shoe factory

PubMed Central

Roquelaure, Y; Mariel, J; Fanello, S; Boissiere, J; Chiron, H; Dano, C; Bureau, D; Penneau-Fontbonne, D

2002-01-01

Aims: (1) To evaluate an active method of surveillance of musculoskeletal disorders (MSDs). (2) To compare different criteria for deciding whether or not a work situation could be considered at high risk of MSDs in a large, modern shoe factory. Methods: A total of 253 blue collar workers were interviewed and examined by the same physician in 1996; 191 of them were re-examined in 1997. Risk factors of MSDs were assessed for each worker by standardised job site work analysis. Prevalence and incidence rates of carpal tunnel syndrome, rotator cuff syndrome, and tension neck syndrome were calculated for each of the nine main types of work situation. Different criteria used to assess situations with high risk of MSDs were compared. Results: On the basis of prevalence data, three types of work situation were detected to be at high risk of MSDs: cutting, sewing, and assembly preparation. The three types of work situations identified on the basis of incidence data (sewing preparation, mechanised assembling, and finishing) were different from those identified by prevalence data. At least one recognised risk factor for MSDs was identified for all groups of work situations. The ergonomic risk could be considered as serious for the four types of work situation having the highest ergonomic scores (sewing, assembly preparation, pasting, and cutting). Conclusion: The results of the health surveillance method depend largely on the definition of the criteria used to define the risk of MSDs. The criteria based on incidence data are more valid than those based on prevalence data. Health and risk factor surveillance must be combined to predict the risk of MSDs in the company. However, exposure assessment plays a greater role in determining the priorities for ergonomic intervention. PMID:12107293

Safety Guide for Health Occupations Programs.

ERIC Educational Resources Information Center

Illinois State Board of Vocational Education and Rehabilitation, Springfield. Div. of Vocational and Technical Education.

The handbook is intended to be utilized by health occupations teachers as supplementary instructional materials for a unit on safety. The document contains general safety rules applicable to hospitals and other health care institutions. Outlined are general rules for fire safety and office and clerical safety and more specific rules for the…

49 CFR 800.25 - Delegation to the Directors of Office of Aviation Safety, Office of Railroad Safety, Office of...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Delegation to the Directors of Office of Aviation... Office of Aviation Safety, Office of Railroad Safety, Office of Highway Safety, Office of Marine Safety... Offices of Aviation, Railroad, Highway, Marine, and Pipeline and Hazardous Materials Safety, the authority...

49 CFR 800.25 - Delegation to the Directors of Office of Aviation Safety, Office of Railroad Safety, Office of...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Delegation to the Directors of Office of Aviation... Office of Aviation Safety, Office of Railroad Safety, Office of Highway Safety, Office of Marine Safety... Offices of Aviation, Railroad, Highway, Marine, and Pipeline and Hazardous Materials Safety, the authority...

49 CFR 800.25 - Delegation to the Directors of Office of Aviation Safety, Office of Railroad Safety, Office of...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Delegation to the Directors of Office of Aviation... Office of Aviation Safety, Office of Railroad Safety, Office of Highway Safety, Office of Marine Safety... Offices of Aviation, Railroad, Highway, Marine, and Pipeline and Hazardous Materials Safety, the authority...

49 CFR 800.25 - Delegation to the Directors of Office of Aviation Safety, Office of Railroad Safety, Office of...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Delegation to the Directors of Office of Aviation... Office of Aviation Safety, Office of Railroad Safety, Office of Highway Safety, Office of Marine Safety... Offices of Aviation, Railroad, Highway, Marine, and Pipeline and Hazardous Materials Safety, the authority...

49 CFR 800.25 - Delegation to the Directors of Office of Aviation Safety, Office of Railroad Safety, Office of...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Office of Aviation Safety, Office of Railroad Safety, Office of Highway Safety, Office of Marine Safety... Offices of Aviation, Railroad, Highway, Marine, and Pipeline and Hazardous Materials Safety, the authority... 49 Transportation 7 2010-10-01 2010-10-01 false Delegation to the Directors of Office of Aviation...

Evaluation of safety belt education program for employees

DOT National Transportation Integrated Search

1980-06-01

This research was designed to determine the effectiveness of a nine-month safety belt educational program, utilizing various informational materials developed by NHTSA, in increasing safety belt usage among corporate employees. The materials used inc...

Safety Education in Driving. 2nd Revision.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Intended for driving instruction students, this publication contains instructional materials for safety education. It contains six sections on facts and figures; defensive driving; safety devices; restraints; emergency situations; and other highway users. Each section consists of reading material followed by an activity or activities. A total of…

76 FR 5494 - Pipeline Safety: Mechanical Fitting Failure Reporting Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Safety: Mechanical Fitting Failure Reporting Requirements AGENCY: Pipeline and Hazardous Materials Safety... tightening. A widely accepted industry guidance document, Gas Pipeline Technical Committee (GPTC) Guide, does...

49 CFR 385.103 - Safety monitoring system.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Safety monitoring system. 385.103 Section 385.103... Safety Monitoring System for Mexico-Domiciled Carriers § 385.103 Safety monitoring system. (a) General... Vehicle Safety Standards (FMVSSs), and Hazardous Materials Regulations (HMRs). (b) Roadside monitoring...

49 CFR 385.103 - Safety monitoring system.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Safety monitoring system. 385.103 Section 385.103... Safety Monitoring System for Mexico-Domiciled Carriers § 385.103 Safety monitoring system. (a) General... Vehicle Safety Standards (FMVSSs), and Hazardous Materials Regulations (HMRs). (b) Roadside monitoring...

75 FR 13807 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-23

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... of Transportation, Pipeline and Hazardous Materials Safety Administration, 1200 New Jersey Avenue, SE...: Updates to Pipeline and Liquefied Natural Gas Reporting Requirements (One Rule). The Notice of Proposed...

76 FR 45904 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... at U.S. Department of Transportation, Pipeline and Hazardous Materials Safety Administration, 1200...: On Occasion. Title: Record Keeping for Natural Gas Pipeline Operators. OMB Control Number: 2137-0049...

49 CFR 385.703 - Safety monitoring system.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Safety monitoring system. 385.703 Section 385.703... Safety Monitoring System for Non-North American Carriers § 385.703 Safety monitoring system. (a) General... Vehicle Safety Standards (FMVSSs), and Hazardous Materials Regulations (HMRs). (b) Roadside monitoring...

49 CFR 385.703 - Safety monitoring system.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Safety monitoring system. 385.703 Section 385.703... Safety Monitoring System for Non-North American Carriers § 385.703 Safety monitoring system. (a) General... Vehicle Safety Standards (FMVSSs), and Hazardous Materials Regulations (HMRs). (b) Roadside monitoring...

Evaluation of mobile micro-sensing devices for GPS-based personal exposure monitoring of heat and particulate matter - a matter of context

NASA Astrophysics Data System (ADS)

Ueberham, Maximilian; Schlink, Uwe; Weiland, Ulrike

2017-04-01

The application of mobile micro-sensing devices (MSDs) for human health and personal exposure monitoring (PEM) is an emerging topic of interest in urban air quality research. In the context of climate change, urban population growth and related anthropogenic activities, an increase is expected for the intensity of citizens' exposure to heat and particulate matter (PM). Therefore more focus on the small-scale perspective of spatio-temporal distribution of air quality parameters is important to complement fixed-monitoring site data. Mobile sensors for PEM are useful for both, the investigation of the local distribution of air quality and the personal exposure profiles of individuals moving within their activity spaces. An evaluation of MSDs' accuracy is crucial, before their sophisticated application in measurement campaigns. To detect variations of exposure at small scales, it is even more important to consider the accuracy of Global Positioning System (GPS) devices within different urban structure types (USTs). We present an assessment of the performance of GPS-based MSDs under indoor laboratory conditions and outdoor testing within different USTs. The aim was to evaluate the accuracy of several GPS devices and MSDs for heat and PM 2.5 in relation to reliable standard sensing devices as part of a PhD-project. The performance parameters are summary measures (mean value, standard deviation), correlation (Pearson r), difference measures (mean bias error, mean absolute error, index of agreement) and Bland-Altman plots. The MSDs have been tested in a climate chamber under constant temperature and relative humidity. For temperature MSDs reaction time was tested because of its relevance to detect temperature variations during mobile measurements. For interpretation of the results we considered the MSDs design and technology (e.g. passive vs. active ventilation). GPS-devices have been tested within low/high dense urban residential areas and low/high dense urban green areas

77 FR 26822 - Pipeline Safety: Verification of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-07

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2012-0068] Pipeline Safety: Verification of Records AGENCY: Pipeline and Hazardous Materials... issuing an Advisory Bulletin to remind operators of gas and hazardous liquid pipeline facilities to verify...

The Interface of Safety and Security in Transport: A Regional Perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Welch, Tim; Duhamel, David A; Nandakumar, A. N.

Security of nuclear and other radioactive material in transport continues to be a challenge for States that are working on strengthening their nuclear security regime. One reason for this is that State regulatory agencies and other organizations lack the resources and trained personnel to dedicate to this field. For over 50 years safety has been a major focus in the use, storage and transport of radioactive material. Only recently, since the late 1990s, has dedicated focus been given to the field of security. One way to assist States to advance nuclear security is to reach out to safety workers (regulators,more » inspectors, and safety compliance personnel) and showcase the need to better integrate safety and security practices. A recent IAEA regional workshop in Bangkok, Thailand (June 2015) yielded profound results when subject matter experts lectured on both the safety and the security of radioactive material in transport. These experts presented and discussed experiences and best practices for: 1) developing and implementing safety requirements and security recommendations for radioactive material in transport; 2) national and international cooperation; and 3) preventing shipment delays/denials of radioactive material. The workshop participants, who were predominantly from safety organizations, shared that they received the following from this event: 1. A clear understanding of the objectives of the IAEA safety requirements and security recommendations for radioactive material in transport. 2. A general understanding of and appreciation for the similarities and differences between safety requirements and security recommendations for radioactive material in transport. 3. A greater appreciation of the interface between transport safety and security and potential impacts of this interface on the efforts to strengthen the compliance assurance regime for the safe transport of radioactive material. 4. A general understanding of assessing the transport security

49 CFR 193.2607 - Foreign material.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Foreign material. 193.2607 Section 193.2607 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY LIQUEFIED NATURAL GAS FACILITIES...

High Power Laser Safety

NASA Astrophysics Data System (ADS)

Brusl, Helmut

1986-10-01

The Austrian legislation about laser safety is discussed. Appropriate control measures for laser use and alternate means of enclosure and baffling are presented. Present laser safety standards are explained briefly. Eye protective techniques and eyewear are considered for a variety of sources. The optical properties of enclosure materials are also discussed.

Management of radioactive material safety programs at medical facilities. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camper, L.W.; Schlueter, J.; Woods, S.

A Task Force, comprising eight US Nuclear Regulatory Commission and two Agreement State program staff members, developed the guidance contained in this report. This report describes a systematic approach for effectively managing radiation safety programs at medical facilities. This is accomplished by defining and emphasizing the roles of an institution`s executive management, radiation safety committee, and radiation safety officer. Various aspects of program management are discussed and guidance is offered on selecting the radiation safety officer, determining adequate resources for the program, using such contractual services as consultants and service companies, conducting audits, and establishing the roles of authorized usersmore » and supervised individuals; NRC`s reporting and notification requirements are discussed, and a general description is given of how NRC`s licensing, inspection and enforcement programs work.« less

49 CFR 191.23 - Reporting safety-related conditions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Reporting safety-related conditions. 191.23... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE; ANNUAL REPORTS, INCIDENT REPORTS, AND SAFETY-RELATED...

Teaching About Fire Safety.

ERIC Educational Resources Information Center

Brady, Holly; Arnold, Anne Jurmu

1982-01-01

This unit on fire safety teaches students how to act in or during a fire and presents fire prevention measures that students can implement at home. Two reproducible masters concerning fire safety and prevention are presented along with class activities, student reading resources, and organizations and companies that offer classroom materials about…

Where Are We Heading in Nanotechnology Environmental Health and Safety and Materials Characterization?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nel, Andre; Parak, Wolfgang J.; Chan, Warren C.

2015-06-23

Every chemist, material scientist, physicist, engineer, or commercial enterprise involved in the synthesis and/or production of engineered nanomaterials (ENM) or nano-enabled products aspires to develop safe materials. Nanotechnology environmental health and safety (nanoEHS) is a research discipline that involves the study of the possible adverse health and biological effects that nanomaterials may have on humans and environmental organisms and ecosystems. NanoEHS research has provided a body of experimental evidence indicating the possibility of hazardous outcomes as a result of the interactions of unique ENM physicochemical properties with similar scale processes occurring at a wide range of nano/bio interfaces, including atmore » biomolecular, cellular, subcellular, organ, systemic, whole organism, or ecosystems levels. This projected hazard and risk potential warrants rigorous attention to safety assessment, safe use, safe implementation, benign design, regulatory oversight, governance, and public awareness to address the possibility and prevention of nanotoxicity, now or at any time in the future.1 Thus, we should understand the properties of the ENMs that are responsible for the toxicological response, so that we can re-engineer their physicochemical characteristics for risk prevention and safer ENM design.2 However, in spite of widespread use, no human toxicological disease or major environmental impact has been reported for ENMs. Thus, while “Nanotoxicology” is a thriving sub-discipline of Nano-EHS, the use of the “root” word toxicology may elicit a feeling that nanomaterials are inherently toxic despite the fact that toxicity has not been established in real-life use so far. As a community, we may want to rename this sub-discipline as “Nanosafety,” since the objective is to use toxicology information to guide the design of safer nanomaterials for use in medicine, biology, electronics, lighting systems, etc. At ACS Nano, we are interested in

10 CFR 35.415 - Safety precautions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Safety precautions. 35.415 Section 35.415 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL Manual Brachytherapy § 35.415 Safety precautions. (a... following removal of the source applicators. (c) A licensee shall notify the Radiation Safety Officer, or...

Comparative Evaluation of the Complementary and Alternative Medicine Therapy and Conventional Therapy Use for Musculoskeletal Disorders Management and Its Association with Job Satisfaction among Dentists of West India.

PubMed

Gupta, Devanand; Batra, Renu; Mahajan, Shveta; Bhaskar, Dara John; Jain, Ankita; Shiju, Mohammed; Yadav, Ankit; Chaturvedi, Mudita; Gill, Shruti; Verma, Renuka; Dalai, Deepak Ranjan; Gupta, Rajendra Kumar

2014-10-01

Musculoskeletal problems have become a significant issue in the profession of dentistry. There are currently no recommended effective disease-preventing and modifying remedies. High prevalence rates for musculoskeletal disorders (MSDs) among dentists have been reported in the literature. Complementary and alternative medicine can be helpful in managing and preventing the MSDs. The purpose of this study was to determine if dentists in the western part of India are using complementary and alternative medicine therapies for MSDs, and also to find if those who use complementary and alternative medicine therapies have greater job/career satisfaction compared to conventional therapy (CT) users. Dentists of western India registered under the Dental Council of India (N = 2166) were recruited for the study. Data were analyzed using univariate and bivariate analyses and logistic regression. A response rate of 73% (n = 1581) was obtained, of which 79% (n = 1249) was suffering from MSDs. The use of complementary and alternative medicine or CT was reported by 90% (n = 1124) of dentists with MSDs. Dentists using complementary and alternative medicine reported greater health (P < 0.001) and carrier satisfaction (P < 0.001) and were able to work as many hours they wanted (P < 0.001) compared to CT users. Complementary and alternative medicine therapies may improve the quality of life and enhance job satisfaction for a dentist who suffers from MSDs.

Comparative Evaluation of the Complementary and Alternative Medicine Therapy and Conventional Therapy Use for Musculoskeletal Disorders Management and Its Association with Job Satisfaction among Dentists of West India

PubMed Central

Gupta, Devanand; Batra, Renu; Mahajan, Shveta; Bhaskar, Dara John; Jain, Ankita; Shiju, Mohammed; Yadav, Ankit; Chaturvedi, Mudita; Gill, Shruti; Verma, Renuka; Dalai, Deepak Ranjan; Gupta, Rajendra Kumar

2014-01-01

Musculoskeletal problems have become a significant issue in the profession of dentistry. There are currently no recommended effective disease-preventing and modifying remedies. High prevalence rates for musculoskeletal disorders (MSDs) among dentists have been reported in the literature. Complementary and alternative medicine can be helpful in managing and preventing the MSDs. The purpose of this study was to determine if dentists in the western part of India are using complementary and alternative medicine therapies for MSDs, and also to find if those who use complementary and alternative medicine therapies have greater job/career satisfaction compared to conventional therapy (CT) users. Dentists of western India registered under the Dental Council of India (N = 2166) were recruited for the study. Data were analyzed using univariate and bivariate analyses and logistic regression. A response rate of 73% (n = 1581) was obtained, of which 79% (n = 1249) was suffering from MSDs. The use of complementary and alternative medicine or CT was reported by 90% (n = 1124) of dentists with MSDs. Dentists using complementary and alternative medicine reported greater health (P < 0.001) and carrier satisfaction (P < 0.001) and were able to work as many hours they wanted (P < 0.001) compared to CT users. Complementary and alternative medicine therapies may improve the quality of life and enhance job satisfaction for a dentist who suffers from MSDs. PMID:25379469

78 FR 69310 - Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-19

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part 172 Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information, Training Requirements, and Security Plans CFR Correction In Title 49 of the Code of...

Nanoscale reference materials for environmental, health and safety measurements: needs, gaps and opportunities.

PubMed

Stefaniak, Aleksandr B; Hackley, Vincent A; Roebben, Gert; Ehara, Kensei; Hankin, Steve; Postek, Michael T; Lynch, Iseult; Fu, Wei-En; Linsinger, Thomas P J; Thünemann, Andreas F

2013-12-01

The authors critically reviewed published lists of nano-objects and their physico-chemical properties deemed important for risk assessment and discussed metrological challenges associated with the development of nanoscale reference materials (RMs). Five lists were identified that contained 25 (classes of) nano-objects; only four (gold, silicon dioxide, silver, titanium dioxide) appeared on all lists. Twenty-three properties were identified for characterisation; only (specific) surface area appeared on all lists. The key themes that emerged from this review were: 1) various groups have prioritised nano-objects for development as "candidate RMs" with limited consensus; 2) a lack of harmonised terminology hinders accurate description of many nano-object properties; 3) many properties identified for characterisation are ill-defined or qualitative and hence are not metrologically traceable; 4) standardised protocols are critically needed for characterisation of nano-objects as delivered in relevant media and as administered to toxicological models; 5) the measurement processes being used to characterise a nano-object must be understood because instruments may measure a given sample in a different way; 6) appropriate RMs should be used for both accurate instrument calibration and for more general testing purposes (e.g., protocol validation); 7) there is a need to clarify that where RMs are not available, if "(representative) test materials" that lack reference or certified values may be useful for toxicology testing and 8) there is a need for consensus building within the nanotechnology and environmental, health and safety communities to prioritise RM needs and better define the required properties and (physical or chemical) forms of the candidate materials.

76 FR 55736 - Safety Advisory: Unauthorized Marking of Compressed Gas Cylinders

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-08

... Hazardous Materials Safety Administration, U.S. Department of Transportation, 820 Bear Tavern Road, Suite... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0198, Notice No. 11-8] Safety Advisory: Unauthorized Marking of Compressed Gas Cylinders...

Bicycle Safety in Action.

ERIC Educational Resources Information Center

National Commission on Safety Education, Washington, DC.

This material was designed to assist schools in teaching bicycle safety. As the population grows and competition for road space increases, it is more imperative than ever that we concentrate attention on the need for caution among pupil cyclists. The pamphlet: (1) discusses the role of bicycle safety in classroom instruction and in student…

10 CFR 35.410 - Safety instruction.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Safety instruction. 35.410 Section 35.410 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL Manual Brachytherapy § 35.410 Safety instruction. In addition to the requirements of § 19.12 of this chapter, (a) The licensee shall provide radiation safety...

Preventing Opioid Use Disorders among Fishing Industry Workers

PubMed Central

Morocho, Cesar; King, Lauren; Bartlett, John; Kelsey, Debra; DeSousa, Monica; Biesecker, Gretchen

2018-01-01

Fishing industry workers are at high risk for work-related musculoskeletal disorders (MSDs) and injuries. Prescription opioids used to treat pain injuries may put these workers at increased risk for developing substance disorders. Using a Community-Based Participatory Research approach, formative research was conducted to inform the eventual development of relevant interventions to prevent and reduce opioid use disorders among fishing industry workers. Qualitative interviews (n = 21) were conducted to assess: knowledge and attitudes about opioid use disorders; features of fishing work that might affect use and/or access to treatment; and community and organizational capacity for prevention and treatment. Participants reported numerous pathways connecting commercial fishing with opioid use. The combination of high stress and physically tasking job duties requires comprehensive workplace interventions to prevent chronic pain and MSDs, in addition to tailored and culturally responsive treatment options to address opioid use disorders in this population. Public health programs must integrate workplace health and safety protection along with evidence-based primary, secondary, and tertiary interventions in order to address opioid use disorders, particularly among workers in strenuous jobs. PMID:29614742

Preventing Opioid Use Disorders among Fishing Industry Workers.

PubMed

Walter, Angela Wangari; Morocho, Cesar; King, Lauren; Bartlett, John; Kelsey, Debra; DeSousa, Monica; Biesecker, Gretchen; Punnett, Laura

2018-03-31

Fishing industry workers are at high risk for work-related musculoskeletal disorders (MSDs) and injuries. Prescription opioids used to treat pain injuries may put these workers at increased risk for developing substance disorders. Using a Community-Based Participatory Research approach, formative research was conducted to inform the eventual development of relevant interventions to prevent and reduce opioid use disorders among fishing industry workers. Qualitative interviews ( n = 21) were conducted to assess: knowledge and attitudes about opioid use disorders; features of fishing work that might affect use and/or access to treatment; and community and organizational capacity for prevention and treatment. Participants reported numerous pathways connecting commercial fishing with opioid use. The combination of high stress and physically tasking job duties requires comprehensive workplace interventions to prevent chronic pain and MSDs, in addition to tailored and culturally responsive treatment options to address opioid use disorders in this population. Public health programs must integrate workplace health and safety protection along with evidence-based primary, secondary, and tertiary interventions in order to address opioid use disorders, particularly among workers in strenuous jobs.

30 CFR 77.208 - Storage of materials.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Storage of materials. 77.208 Section 77.208 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH... Installations § 77.208 Storage of materials. (a) Materials shall be stored and stacked in a manner which...

30 CFR 77.208 - Storage of materials.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Storage of materials. 77.208 Section 77.208 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH... Installations § 77.208 Storage of materials. (a) Materials shall be stored and stacked in a manner which...

40 CFR 63.822 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the MSDS meets the data requirements of § 63.827(b) and (c). The purpose of the CPDS is to assist the... weight-fraction, kg/kg. (4) Chij=the organic HAP content of solvent j, added to solids-containing material i, expressed as a weight-fraction, kg/kg. (5) Chj=the organic HAP content of solvent j, expressed...

Work-related musculoskeletal disorders, job stressors and gender responses in foundry industry.

PubMed

Sharma, Rohit; Singh, Ranjit

2014-01-01

The main aim of this paper was to identify job stressors, gender responses and association of psychosocial work stressors with prevalence of work related musculoskeletal disorders (MSDs) among foundry workers. The data were obtained with ergonomics checklist using Likert scale. The results of this study showed a high prevalence of MSDs among workers. The male workers were more prone to pain in neck while the female workers were more prone to MSDs in upper back and shoulders. Correlation analysis showed significant relationship of dimensions of work aspects with pain and discomfort. It proved that the work-related MSDs are the results of interaction of multiple stressors associated with work and work environment, and other personal factors. ANOVA indicated that the perception of work aspects as stressors differed significantly between male and female workers.

Predicting clinical biological responses to dental materials.

PubMed

Wataha, John C

2012-01-01

Methods used to measure and predict clinical biological responses to dental materials remain controversial, confusing, and to some extent, unsuccessful. The current paper reviews significant issues surrounding how we assess the biological safety of materials, with a historical summary and critical look at the biocompatibility literature. The review frames these issues from a U.S. perspective to some degree, but emphasizes their global nature and universal importance. The PubMed database and information from the U.S. Food and Drug Administration, International Standards Organization, and American National Standards Institute were searched for prominent literature addressing the definition of biocompatibility, types of biological tests employed, regulatory and standardization issues, and how biological tests are used together to establish the biological safety of materials. The search encompassed articles published in English from approximately 1965-2011. The review does not comprehensively review the literature, but highlights significant issues that confront the field. Years ago, tests for biological safety sought to establish material inertness as the measure of safety, a criterion that is now deemed naive; the definition of biocompatibility has broadened along with the roles for materials in patient oral health care. Controversies persist about how in vitro or animal tests should be used to evaluate the biological safety of materials for clinical use. Controlled clinical trials remain the single best measure of the clinical response to materials, but even these tests have significant limitations and are less useful to identify mechanisms that shape material performance. Practice-based research networks and practitioner databases are emerging as important supplements to controlled clinical trials, but their final utility remains to be determined. Today we ask materials to play increasingly sophisticated structural and therapeutic roles in patient treatment. To

46 CFR 128.210 - Class II vital systems-materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ENGINEERING: EQUIPMENT AND SYSTEMS Materials and Pressure Design § 128.210 Class II vital systems—materials... Commanding Officer, Marine Safety Center, if shown to provide a level of safety equivalent to materials in...

46 CFR 128.210 - Class II vital systems-materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ENGINEERING: EQUIPMENT AND SYSTEMS Materials and Pressure Design § 128.210 Class II vital systems—materials... Commanding Officer, Marine Safety Center, if shown to provide a level of safety equivalent to materials in...

46 CFR 128.210 - Class II vital systems-materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ENGINEERING: EQUIPMENT AND SYSTEMS Materials and Pressure Design § 128.210 Class II vital systems—materials... Commanding Officer, Marine Safety Center, if shown to provide a level of safety equivalent to materials in...

46 CFR 128.210 - Class II vital systems-materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ENGINEERING: EQUIPMENT AND SYSTEMS Materials and Pressure Design § 128.210 Class II vital systems—materials... Commanding Officer, Marine Safety Center, if shown to provide a level of safety equivalent to materials in...

46 CFR 128.210 - Class II vital systems-materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ENGINEERING: EQUIPMENT AND SYSTEMS Materials and Pressure Design § 128.210 Class II vital systems—materials... Commanding Officer, Marine Safety Center, if shown to provide a level of safety equivalent to materials in...

78 FR 5866 - Pipeline Safety: Annual Reports and Validation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-28

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID PHMSA-2012-0319] Pipeline Safety: Annual Reports and Validation AGENCY: Pipeline and Hazardous Materials... 2012 gas transmission and gathering annual reports, remind pipeline owners and operators to validate...

75 FR 43612 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-26

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2010-0042] Pipeline Safety: Request for Special Permit AGENCY: Pipeline and Hazardous Materials..., Inc., a natural gas pipeline operator, seeking relief from compliance with certain requirements in the...

77 FR 34458 - Pipeline Safety: Requests for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-11

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2012-0112] Pipeline Safety: Requests for Special Permit AGENCY: Pipeline and Hazardous Materials... BreitBurn Energy Company LP, two natural gas pipeline operators, seeking relief from compliance with...

75 FR 66425 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-28

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2010-0124] Pipeline Safety: Request for Special Permit AGENCY: Pipeline and Hazardous Materials... Company, LP, a natural gas pipeline operator, seeking relief from compliance with certain requirements in...

78 FR 14877 - Pipeline Safety: Incident and Accident Reports

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-07

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID PHMSA-2013-0028] Pipeline Safety: Incident and Accident Reports AGENCY: Pipeline and Hazardous Materials... PHMSA F 7100.2--Incident Report--Natural and Other Gas Transmission and Gathering Pipeline Systems and...

75 FR 9018 - Pipeline Safety: Random Drug Testing Rate

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-26

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID PHMSA-2010-0034] Pipeline Safety: Random Drug Testing Rate AGENCY: Pipeline and Hazardous Materials... pipelines and operators of liquefied natural gas facilities must select and test a percentage of covered...

77 FR 2606 - Pipeline Safety: Random Drug Testing Rate

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-18

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID PHMSA-2012-0004] Pipeline Safety: Random Drug Testing Rate AGENCY: Pipeline and Hazardous Materials... pipelines and operators of liquefied natural gas facilities must select and test a percentage of covered...

30 CFR 75.400 - Accumulation of combustible materials.

Code of Federal Regulations, 2014 CFR

2014-07-01

... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Combustible Materials and Rock... rock-dusted surfaces, loose coal, and other combustible materials, shall be cleaned up and not be...

30 CFR 75.400 - Accumulation of combustible materials.

Code of Federal Regulations, 2011 CFR

2011-07-01

... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Combustible Materials and Rock... rock-dusted surfaces, loose coal, and other combustible materials, shall be cleaned up and not be...

30 CFR 75.400 - Accumulation of combustible materials.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Combustible Materials and Rock... rock-dusted surfaces, loose coal, and other combustible materials, shall be cleaned up and not be...

30 CFR 75.400 - Accumulation of combustible materials.

Code of Federal Regulations, 2012 CFR

2012-07-01

... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Combustible Materials and Rock... rock-dusted surfaces, loose coal, and other combustible materials, shall be cleaned up and not be...

30 CFR 75.400 - Accumulation of combustible materials.

Code of Federal Regulations, 2013 CFR

2013-07-01

... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Combustible Materials and Rock... rock-dusted surfaces, loose coal, and other combustible materials, shall be cleaned up and not be...

Undisclosed chemicals--implications for risk assessment: a case study from the mining industry.

PubMed

Singh, Khareen; Oates, Christopher; Plant, Jane; Voulvoulis, Nikolaos

2014-07-01

Many of the chemicals used in industry can be hazardous to human health and the environment, and some formulations can have undisclosed ingredients and hazards, increasing the uncertainty of the risks posed by their use. The need for a better understanding of the extent of undisclosed information in chemicals arose from collecting data on the hazards and exposures of chemicals used in typical mining operations (copper, platinum and coal). Four main categories of undisclosed chemicals were defined (incomplete disclosure; chemicals with unspecific identities; relative quantities of ingredients not stated; and trade secret ingredients) by reviewing material safety data sheet (MSDS) omissions in previous studies. A significant number of chemicals (20% of 957 different chemicals) across the three sites had a range of undisclosed information, with majority of the chemicals (39%) having unspecific identities. The majority of undisclosed information was found in commercially available motor oils followed by cleaning products and mechanical maintenance products, as opposed to reagents critical to the main mining processes. All three types of chemicals had trade secrets, unspecific chemical identities and incomplete disclosures. These types of undisclosed information pose a hindrance to a full understanding of the hazards, which is made worse when combined with additional MSDS omissions such as acute toxicity endpoints (LD50) and/or acute aquatic toxicity endpoints (LC50), as well as inadequate hazard classifications of ingredients. The communication of the hazard information in the MSDSs varied according to the chemical type, the manufacturer and the regulations governing the MSDSs. Undisclosed information can undermine occupational health protection, compromise the safety of workers in industry, hinder risk assessment procedures and cause uncertainty about future health. It comes down to the duty of care that industries have towards their employees. With a wide range of

Safety control circuit for a neutronic reactor

DOEpatents

Ellsworth, Howard C.

2004-04-27

A neutronic reactor comprising an active portion containing material fissionable by neutrons of thermal energy, means to control a neutronic chain reaction within the reactor comprising a safety device and a regulating device, a safety device including means defining a vertical channel extending into the reactor from an aperture in the upper surface of the reactor, a rod containing neutron-absorbing materials slidably disposed within the channel, means for maintaining the safety rod in a withdrawn position relative to the active portion of the reactor including means for releasing said rod on actuation thereof, a hopper mounted above the active portion of the reactor having a door disposed at the bottom of the hopper opening into the vertical channel, a plurality of bodies of neutron-absorbing materials disposed within the hopper, and means responsive to the failure of the safety rod on actuation thereof to enter the active portion of the reactor for opening the door in the hopper.

The Inside Information about Safety Surfacing.

ERIC Educational Resources Information Center

Thompson, Donna; Hudson, Susan

2003-01-01

Tested the impact attenuation characteristics of safety surfaces used in indoor child care play settings. Found that the most common surfaces used were indoor/outdoor carpet, various types of mats, and safety floor tiles. Nearly 60 percent of tested materials had a critical fall height of 1 foot or less. Concluded that carpet, safety tile, and…

77 FR 28669 - Pipeline Safety: Information Collection Activities, Excess Flow Valve Census

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-15

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2012-0086] Pipeline Safety: Information Collection Activities, Excess Flow Valve Census AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice and request for...

78 FR 65429 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2010-0041] Pipeline Safety: Request for Special Permit AGENCY: Pipeline and Hazardous Materials...-0041 Williams Gas Pipeline 49 CFR 192.150........ To authorize the extension Company, LLC (WGP). of a...

76 FR 11853 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-03

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0027] Pipeline Safety: Request for Special Permit AGENCY: Pipeline and Hazardous Materials... a 24-inch mainline natural gas pipeline, 595 feet in length. The first segment of the special permit...

78 FR 33891 - Safety Advisory: Compressed Gas Cylinders That Have Not Been Tested Properly

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-05

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Properly AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Safety... otherwise safely discharged. Cylinders that are filled with a material other than an atmospheric gas should...

Multi-Functional Surface Engineering for Li-Excess Layered Cathode Material Targeting Excellent Electrochemical and Thermal Safety Properties.

PubMed

Bian, Xiaofei; Fu, Qiang; Pang, Qiang; Gao, Yu; Wei, Yingjin; Zou, Bo; Du, Fei; Chen, Gang

2016-02-10

The Li(Li(0.18)Ni(0.15)Co(0.15)Mn(0.52))O2 cathode material is modified by a Li4M5O12-like heterostructure and a BiOF surface layer. The interfacial heterostructure triggers the layered-to-Li4M5O12 transformation of the material which is different from the layered-to-LiMn2O4 transformation of the pristine Li(Li(0.18)Ni(0.15)Co(0.15)Mn(0.52))O2. This Li4M5O12-like transformation helps the material to keep high working voltage, long cycle life and excellent rate capability. Mass spectrometry, in situ X-ray diffraction and transmission electron microscope show that the Li4M5O12-like phase prohibits oxygen release from the material bulk at elevated temperatures. In addition, the BiOF coating layer protects the material from harmful side reactions with the electrolyte. These advantages significantly improve the electrochemical performance of Li(Li(0.18)Ni(0.15)Co(0.15)Mn(0.52))O2. The material shows a discharge capacity of 292 mAh g(-1) at 0.2 C with capacity retention of 92% after 100 cycles. Moreover, a high discharge capacity of 78 mAh g(-1) could be obtained at 25 C. The exothermic temperature of the fully charged electrode is elevated from 203 to 261 °C with 50% reduction of the total thermal release, highlighting excellent thermal safety of the material.

30 CFR 56.6102 - Explosive material storage practices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Explosive material storage practices. 56.6102 Section 56.6102 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Explosives Storage § 56.6102 Explosive material storag...

30 CFR 56.6102 - Explosive material storage practices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Explosive material storage practices. 56.6102 Section 56.6102 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Explosives Storage § 56.6102 Explosive material storag...

30 CFR 56.6102 - Explosive material storage practices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Explosive material storage practices. 56.6102 Section 56.6102 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Explosives Storage § 56.6102 Explosive material storag...

75 FR 36615 - Pipeline Safety: Information Collection Gas Distribution Annual Report Form

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-28

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part 192 [Docket No. PHMSA-RSPA-2004-19854] Pipeline Safety: Information Collection Gas Distribution Annual Report Form AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Request...

Investigation of work-related musculoskeletal disorders among male kitchen workers in South India.

PubMed

Subramaniam, Shankar; Murugesan, Shanmugam

2015-01-01

This study aims to quantify the prevalence of work-related musculoskeletal disorders (MSDs) and risks among male kitchen workers in the catering industry. Data were collected with the help of the Nordic musculoskeletal questionnaire and by direct observations. In total, 114 male kitchen workers from various hostels of a college in South India were considered for this study. The average age and mean years of employment of the workers are 26.4 (SD 7.7) and 7.8 respectively. The statistical analysis carried out reveals that 67.5% of male kitchen workers reported MSDs during the past 12 months. The highest prevalence rate has been found in the lower back (65.8%) and shoulder region (62.3%). Among different categories of kitchen work analyzed, it is evident that chief cooks suffer more from MSDs (79.2%) than assistant cooks (74.3%) and kitchen aides (30.0%). Workers in the older group, i.e., ≥ 41 years, and workers with 6-10 years of experience suffer with higher risk of MSDs, i.e., 93.9% and 87.5%, respectively. The male kitchen workers who participated in this research were found to possess both MSDs and ergonomic hazards.

Risk Factors for Upper Extremity Musculoskeletal Disorders Among Office Workers in Qom Province, Iran.

PubMed

Alavi, Seyedeh Shohreh; Abbasi, Mahya; Mehrdad, Ramin

2016-10-01

The identification of the risk factors for musculoskeletal disorders (MSDs) is the first step in designing effective preventive interventions. To investigate the association between individual, organizational, physical, and psychological factors and upper extremity MSDs (i.e., shoulder, elbow and hand/wrist). In this cross-sectional study, the study population was comprised of office workers from Qom Province, Iran. Of the 1630 Iranian office workers who were selected via a random multistage cluster sampling method, 1488 completed a comprehensive data collection form designed to investigate the individual, organizational, physical, and psychological factors related to MSDs (response rate: 91.3%). The predictors of shoulder MSDs in the past 12 months were uncomfortable sitting posture (β = 0.42, P = 0.04), limited rest breaks (β=0.73, P = 0.012), and no access to adjustable desks (β = 0.43, P = 0.018). Working on a computer for more than five hours (β = 0.61, P = 0.004) and an uncomfortable sitting posture (β = 0.79, P = 0.001) predicted hand/wrist symptoms. Various risk factors in the workplace may contribute to MSDs in different upper extremities. Preventive interventions should hence include ergonomic and office equipment modifications.

75 FR 35516 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-22

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2010-0147] Pipeline Safety: Request for Special Permit AGENCY: Pipeline and Hazardous Materials... with the Class 1 location portion of a 7.4 mile natural gas pipeline to be constructed in Alaska. This...

9 CFR 390.2 - Published materials.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Published materials. 390.2 Section 390.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.2 Published materials. FSIS rules and...

9 CFR 390.2 - Published materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Published materials. 390.2 Section 390.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.2 Published materials. FSIS rules and...

9 CFR 390.2 - Published materials.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Published materials. 390.2 Section 390.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.2 Published materials. FSIS rules and...

9 CFR 390.2 - Published materials.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Published materials. 390.2 Section 390.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.2 Published materials. FSIS rules and...

Symptoms of musculoskeletal disorders among ammunition factory workers in Turkey.

PubMed

Pinar, Tevfik; Cakmak, Z Aytul; Saygun, Meral; Akdur, Recep; Ulu, Nuriye; Keles, Isik; Saylam, Hamdi Saim

2013-01-01

The aim of this study was to assess the prevalence of symptoms of work-related musculoskeletal disorders (MSDs) and to determine the risk factors among ammunition factory workers in Turkey. This cross-sectional study was performed on 955 ammunition factory workers. Potential risk factors were investigated with a questionnaire and multivariate logistic regression analysis was performed. During the previous year, 39.3% of ammunition workers experienced symptoms of work-related MSDs. Logistic regression analysis showed smoking (odds ratio [OR] = 1.372), chronic diseases (OR = 1.795), body mass index (BMI; overweight) (OR = 1.631), working year (OR = 1.509), cold temperature (OR = 1.838), and work load (OR = 2.210) were significant independent risk factors for the development of symptoms of MSDs. It was found that both work-related conditions and personal and environmental factors are important for the development of occupational MSDs.

Association between psychosocial, organizational and personal factors and prevalence of musculoskeletal disorders in office workers.

PubMed

Piranveyseh, Peyman; Motamedzade, Majid; Osatuke, Katerine; Mohammadfam, Iraj; Moghimbeigi, Abbas; Soltanzadeh, Ahmad; Mohammadi, Heidar

2016-01-01

The purpose of this study was to investigate the relationship between organizational and personal (individual) factors with the prevalence of musculoskeletal disorders (MSDs) in office workers of the Iranian Gas Transmission Company. The participants rated two questionnaires - the standardized Nordic Musculoskeletal Questionnaire to measure the prevalence of MSDs, and the Veterans Healthcare Administration All Employee Survey questionnaire (2004 version) - to measure psychosocial, organizational and individual aspects of job satisfaction and workplace climate. The highest prevalence of MSDs was found in the lower back (49.7%) and neck (49.0%) regions. Results of the logistic regression models showed that some psychosocial and organizational factors and also some individual factors were associated with prevalence of MSDs (p < 0.05).These findings illustrate the need to consider all elements of the work system as a whole in future studies and in organizational planning.

[Work-related musculoskeletal disorders and their association with occupational nursing].

PubMed

Barboza, Michele Cristiene Nachtigall; Milbrath, Viviane Marten; Bielemann, Valquíria Machado; de Siqueira, Hedi Crecencia Heckler

2008-12-01

Work-related musculoskeletal diseases (MSD) are disorders in the musculoskeletal structures caused by chronic occupational processes. The objective of this study was to get to know scientific papers on MSD related to the nursing profession. A bibliographic research of the last ten years was conducted at Health Virtual Library using the main data bases. Twenty-one summaries were found. Among them, thirteen were selected because they specifically focused on the subject. Three main areas were identified: occupational health nurses in relation to MSDs--their importance in health prevention and promotion; Ergonomics as MSDs prevention method: performed as changes on work consider risk factors; Vulnerability of Nursing staff to MSDs--predisposing factors to disease caused by inappropriate working conditions. The conclusion was that an occupational and ergonomic health service is important to prevent MSDs, especially among the nursing staff.

Materials research for aircraft fire safety

NASA Technical Reports Server (NTRS)

Kourtides, D. A.; Parker, J. A.; Bricker, R. W.

1976-01-01

The thermochemical and flammability characteristics of two polymeric composites currently in use and seven others being considered for use as aircraft interior panels are described. The properties studied included: (1) limiting oxygen index of the composite constituents; (2) fire containment capability of the composite; (3) smoke evolution from the composite; (4) thermogravimetric analysis; (5) composition of the volatile products of thermal degradation; and (6) relative toxicity of the volatile products of pyrolysis. The performance of high-temperature laminating resins such as bismaleimides is compared with the performance of phenolics and epoxies. The relationship of increased fire safety with the use of polymers with high anaerobic char yield is shown. Processing parameters of the state-of-the-art and the advanced bismaleimide composites are detailed.

77 FR 15453 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-15

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... information collection titled, ``Gas Pipeline Safety Program Certification and Hazardous Liquid Pipeline... collection request that PHMSA will be submitting to OMB for renewal titled, ``Gas Pipeline Safety Program...

77 FR 34123 - Pipeline Safety: Public Meeting on Integrity Management of Gas Distribution Pipelines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-08

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2012-0100] Pipeline Safety: Public Meeting on Integrity Management of Gas Distribution Pipelines AGENCY: Office of Pipeline Safety, Pipeline and Hazardous Materials Safety Administration, DOT. ACTION...

49 CFR 178.255-8 - Safety devices.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Safety devices. 178.255-8 Section 178.255-8 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Portable Tanks § 178.255-8 Safety devices. (a) See § 173.315(i) of this subchapter. (b) [Reserved] [Amdt...

49 CFR 178.255-8 - Safety devices.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Safety devices. 178.255-8 Section 178.255-8 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... Specifications for Portable Tanks § 178.255-8 Safety devices. (a) See § 173.315(i) of this subchapter. (b...

76 FR 21423 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-15

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0063] Pipeline Safety: Request for Special Permit AGENCY: Pipeline and Hazardous Materials... application is for two 30-inch segments, segments 3 and 4, of the TPL 330 natural gas pipeline located in St...

Criticality Safety Basics for INL FMHs and CSOs

DOE Office of Scientific and Technical Information (OSTI.GOV)

V. L. Putman

2012-04-01

Nuclear power is a valuable and efficient energy alternative in our energy-intensive society. However, material that can generate nuclear power has properties that require this material be handled with caution. If improperly handled, a criticality accident could result, which could severely harm workers. This document is a modular self-study guide about Criticality Safety Principles. This guide's purpose it to help you work safely in areas where fissionable nuclear materials may be present, avoiding the severe radiological and programmatic impacts of a criticality accident. It is designed to stress the fundamental physical concepts behind criticality controls and the importance of criticalitymore » safety when handling fissionable materials outside nuclear reactors. This study guide was developed for fissionable-material-handler and criticality-safety-officer candidates to use with related web-based course 00INL189, BEA Criticality Safety Principles, and to help prepare for the course exams. These individuals must understand basic information presented here. This guide may also be useful to other Idaho National Laboratory personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. This guide also includes additional information that will not be included in 00INL189 tests. The additional information is in appendices and paragraphs with headings that begin with 'Did you know,' or with, 'Been there Done that'. Fissionable-material-handler and criticality-safety-officer candidates may review additional information at their own discretion. This guide is revised as needed to reflect program changes, user requests, and better information. Issued in 2006, Revision 0 established the basic text and integrated various programs from former contractors. Revision 1 incorporates operation and program changes implemented since 2006. It also incorporates suggestions, clarifications, and additional

30 CFR 57.16017 - Hoisting heavy equipment or material.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hoisting heavy equipment or material. 57.16017 Section 57.16017 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Materials...

30 CFR 57.16017 - Hoisting heavy equipment or material.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hoisting heavy equipment or material. 57.16017 Section 57.16017 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Materials...

30 CFR 57.16017 - Hoisting heavy equipment or material.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hoisting heavy equipment or material. 57.16017 Section 57.16017 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Materials...

30 CFR 57.16017 - Hoisting heavy equipment or material.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hoisting heavy equipment or material. 57.16017 Section 57.16017 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Materials...

Millwright Apprenticeship. Related Training Modules. 1.1-1.8 Safety.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

This packet, part of the instructional materials for the Oregon apprenticeship program for millwright training, contains eight modules covering safety. The modules provide information on the following topics: general safety, hand tool safety, power tool safety, fire safety, hygiene, safety and electricity, types of fire and fire prevention, and…

75 FR 45697 - Safety Advisory Notice: Personal Electronic Device Related Distractions

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-03

... the Federal safety authority for the transportation of hazardous materials by air, rail, highway, and... transportation of hazardous materials. In light of PHMSA's vital safety mission, we issue this advisory bulletin... hazardous materials transportation. Issued in Washington, DC, on July 27, 2010. Magdy El-Sibaie, Associate...

76 FR 68828 - Pipeline Safety: Emergency Responder Forum

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-07

... PHMSA-2011-0295] Pipeline Safety: Emergency Responder Forum AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice of Forum. SUMMARY: PHMSA is co-sponsoring a one-day Emergency Responder Forum with the National Association of Pipeline Safety Representatives and the United...

Safety management of complex research operators

NASA Technical Reports Server (NTRS)

Brown, W. J.

1981-01-01

Complex research and technology operations present varied potential hazards which are addressed in a disciplined, independent safety review and approval process. Potential hazards vary from high energy fuels to hydrocarbon fuels, high pressure systems to high voltage systems, toxic chemicals to radioactive materials and high speed rotating machinery to high powered lasers. A Safety Permit System presently covers about 600 potentially hazardous operations. The Safety Management Program described is believed to be a major factor in maintaining an excellent safety record.

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Investigators Division Staff Facilities and Centers Staff Jobs Safety Personnel Resources Committees In Case of Materials Safety Bulletins Archive September 2016 - Hazardous Waste [PDF] July 2016 - When Should You Report - Include Safety Training in On-The-Job Training [PDF] July 2009 - Eye Injury from Corrosive Organic Solvent

The Role of ESA TEC-QTE in the ISS Safety Process

NASA Astrophysics Data System (ADS)

Orlandi, M.; Rohr, T.; Stienstra, M. H.; Semprimoschnig, C.

2013-09-01

On the 17th of July 2000, the Materials and Processes Reciprocal Agreement was signed between NASA and ESA to define the process for selection and certification of materials used in the Space Shuttle and the International Space Station. Consecutively, on the 20th of June 2003 this agreement was extended to the Automated Transport Vehicle (ATV). It is therefore the responsibility of ESA TEC-QTE, the Materials Space Evaluation and Radiation Effects section, part of the Product Assurance and Safety Department, to ensure that all materials, parts and processes of each of the ISS payloads not only function as required but also do not pose a risk to the safety of the crew members. In this context, TEC-QTE provides qualified expertise to support the ESA Flight Safety Review and assesses safety aspects related to manned projects (materials properties, fluid system compatibility, fungus resistance). This is supported by the Materials Space Evaluation and Radiation Effects section's Materials and Electrical Components laboratory having at its disposition a range of facilities designed to perform environmental effects testing of which off-gassing tests according to ECSS-Q-ST-70-29C (equivalent to NASA STD 6001 test 7) and outgassing tests according to ECSS-Q-ST-70-02C (equivalent to ASTM-E-595). The ESA facility to perform flammability tests according to ECSS-Q-ST-70-21A (equivalent to NASA STD 6001 test1) was moved to Astrium Bremen.TEC-QTE is in charge of reviewing and approving, via RFA or MUA , all materials that do not meet safety requirements as well as COTS or CAM (black boxes) equipment.The safety process ends with the issue of the Materials Certification of the reviewed payload hardware that shows compliance with the relevant materials and processes requirements and standards.In addition to the safety related activities for the ISS, specialised TEC-QTE personnel provide measurements of the air quality inside the ATV and assess whether the toxicity index is within

Safety on Earth From MARSS

NASA Technical Reports Server (NTRS)

2002-01-01

ENSCO, Inc., developed the Meteorological and Atmospheric Real-time Safety Support (MARSS) system for real-time assessment of meteorological data displays and toxic material spills. MARSS also provides mock scenarios to guide preparations for emergencies involving meteorological hazards and toxic substances. Developed under a Small Business Innovation Research (SBIR) contract with Kennedy Space Center, MARSS was designed to measure how safe NASA and Air Force range safety personnel are while performing weather sensitive operations around launch pads. The system augments a ground operations safety plan that limits certain work operations to very specific weather conditions. It also provides toxic hazard prediction models to assist safety managers in planning for and reacting to releases of hazardous materials. MARSS can be used in agricultural, industrial, and scientific applications that require weather forecasts and predictions of toxic smoke movement. MARSS is also designed to protect urban areas, seaports, rail facilities, and airports from airborne releases of hazardous chemical substances. The system can integrate with local facility protection units and provide instant threat detection and assessment data that is reportable for local and national distribution.

Investigations of plastic composite materials for highway safety structures

DOT National Transportation Integrated Search

1998-08-01

This report presents a basic overview and assessment of different concepts and technologies of using polymer composites in structures generally used for highway safety. The structural systems included a highway barrier guardrail with its posts and bl...

Prevalence of musculoskeletal disorders among immigrant Latino farmworkers and non-farmworkers in North Carolina

PubMed Central

Mora, Dana C.; Miles, Christopher M.; Chen, Haiying; Quandt, Sara A.; Summers, Phillip; Arcury, Thomas A.

2015-01-01

Background This manuscript evaluates the variability in the prevalence of epicondylitis, rotator cuff syndrome, low back pain, and lower extremity pathology among immigrant Latino farmworkers and non-farmworkers. Methods Data were collected from a study among 272 farmworkers and non-farmworkers. Participants were recruited in eastern and central North Carolina. A physical exam was conducted by trained physicians. Results Prevalence of MSDs among Latino manual workers is high compared other workers in similar occupations. Non-farmworkers (49%) had a higher prevalence of MSDs than farmworkers (35%). Epicondylitis (20.2%) and rotator cuff syndrome (19.1%) were most prevalent. Age was found to be significant among those who had epicondylitis (AOR = 1.04) and lower extremity pathology (AOR = 1.07). Conclusions Latino immigrant manual workers have high prevalence of MSDs. Further studies are needed to identify possible factors that make these populations more vulnerable to MSDs. PMID:25454715

Prevalence of musculoskeletal disorders among immigrant Latino farmworkers and non-farmworkers in North Carolina.

PubMed

Mora, Dana C; Miles, Christopher M; Chen, Haiying; Quandt, Sara A; Summers, Phillip; Arcury, Thomas A

2016-05-03

This paper evaluates the variability in the prevalence of epicondylitis, rotator cuff syndrome, low back pain, and lower extremity pathology among immigrant Latino farmworkers and non-farmworkers. Data were collected from a study among 272 farmworkers and non-farmworkers. Participants were recruited in eastern and central North Carolina. A physical examination was conducted by trained physicians. Prevalence of musculoskeletal disorders (MSDs) among Latino manual workers is high compared with other workers in similar occupations. Non-farmworkers (49%) had a higher prevalence of MSDs than farmworkers (35%). Epicondylitis (20.2%) and rotator cuff syndrome (19.1%) were most prevalent. Age was found to be significant among those who had epicondylitis (adjusted odds ratio [AOR] = 1.04) and lower extremity pathology (AOR = 1.07). Latino immigrant manual workers have high prevalence of MSDs. Further studies are needed to identify possible factors that make these populations more vulnerable to MSDs.

Safety of Li-SOCl2 cells

NASA Technical Reports Server (NTRS)

Subbarao, S.; Halpert, G.

1985-01-01

The safety of lithium thionyl chloride cells has been a concern of JPL for some time in the development of these cells for NASA's use. Because the safety problems are complex and several issues are interrelated it was decided that it would be best to put together an organized review of the safety issues, which are reviewed here. Hazards are classified in three categories: (1) cell leakage, a problem dealing with construction or materials; (2) venting of toxic gases through seals and welds, considered a mild hazard in which electrolyte and gas is released; and (3) violent rupture or controlled rupture of cells with the possibility of explosion of the materials inside. These hazards and their effects are detailed along with possible ways of dealing with them.

75 FR 56972 - Pipeline Safety: Control Room Management/Human Factors

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-17

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts... Factors AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION: Notice of...: Background There are roughly 170,000 miles of hazardous liquid pipelines, 295,000 miles of gas transmission...

Railroad Safety: DoD can Improve the Safety of On-Base Track and Equipment

DTIC Science & Technology

1991-06-01

explosives are secured on rail cars for on-base movement. Unless you publicly announce its contents earlier, we plan no further distribution of this report...and rail cars thatare used to haul ammunition, explosives, or other hazardous material . The safe transport of this material both on military...commercial operating conditions. When transporting haz- ardous materials , cars operating in commerce must also comply with safety requirements established

Effectiveness of high school safety belt instruction

DOT National Transportation Integrated Search

1982-12-01

The Effectiveness of High School Safety Belt Instruction was developed during a two-phased project. In Phase I, Focus Group Activities were conducted to determine whether audiovisual safety belt instructional materials assembled by the National Highw...

Hispanic Outreach: Delivering the Safety and Health Message.

ERIC Educational Resources Information Center

Delaney, Kathryn

2002-01-01

After a sharp increase in fatal accidents among Hispanic construction workers in Dallas, the Occupational Safety and Health Administration (OSHA) began aggressive outreach to the Mexican American community. Efforts included training bilingual safety trainers, offering workers' safety training in Spanish, and developing Spanish-language materials.…

[Influence of promotional material on hand hygiene in the safety culture of a tertiary hospital].

PubMed

Molina-Cabrillana, J; Dorta-Hung, M E; Otero Sanz, L; Henández Vera, J R; Martín-Rodríguez, M M; García de Carlos, P

2016-06-01

In order to increase safety culture about hand hygiene by means of messages and reminders about its importance in preventing nosocomial infections, we developed a new set of materials in the Complejo Hospitalario Universitario Insular Materno-Infantil of Las Palmas, Gran Canaria, constitued by two centres with 450 beds each and acredited for medical internal residents training. We hired a well-known caricaturist, who adapted the messages to the local way of speaking, by using characters that used to appear in his artwork in the local newspaper. Also, we continued to work with other graphic design professionals. We monitored adherence and consumption of products for hand rubbing. We noted an increase in both indicators in the following months after the implementation of this strategy. Moreover, we revised the infrastructures for hand hygiene, and were able to demonstrate improvements in most of the patient care areas. The material was well accepted by professionals, patients and visitors. No other interventions were made, so we think improvements can be attributable to this strategy in our setting. Copyright © 2016 SECA. Published by Elsevier Espana. All rights reserved.

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Investigators Division Staff Facilities and Centers Staff Jobs Safety Personnel Resources Committees In Case of ? Click Here! Commitment to Safety at MSD In the Materials Sciences Division, our mission is to do world -class science in a safe environment. We proudly support a strong safety culture in which all staff and

Structural Deterministic Safety Factors Selection Criteria and Verification

NASA Technical Reports Server (NTRS)

Verderaime, V.

1992-01-01

Though current deterministic safety factors are arbitrarily and unaccountably specified, its ratio is rooted in resistive and applied stress probability distributions. This study approached the deterministic method from a probabilistic concept leading to a more systematic and coherent philosophy and criterion for designing more uniform and reliable high-performance structures. The deterministic method was noted to consist of three safety factors: a standard deviation multiplier of the applied stress distribution; a K-factor for the A- or B-basis material ultimate stress; and the conventional safety factor to ensure that the applied stress does not operate in the inelastic zone of metallic materials. The conventional safety factor is specifically defined as the ratio of ultimate-to-yield stresses. A deterministic safety index of the combined safety factors was derived from which the corresponding reliability proved the deterministic method is not reliability sensitive. The bases for selecting safety factors are presented and verification requirements are discussed. The suggested deterministic approach is applicable to all NASA, DOD, and commercial high-performance structures under static stresses.

Criticality Safety Evaluation for the TACS at DAF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Percher, C. M.; Heinrichs, D. P.

2011-06-10

Hands-on experimental training in the physical behavior of multiplying systems is one of ten key areas of training required for practitioners to become qualified in the discipline of criticality safety as identified in DOE-STD-1135-99, Guidance for Nuclear Criticality Safety Engineer Training and Qualification. This document is a criticality safety evaluation of the training activities and operations associated with HS-3201-P, Nuclear Criticality 4-Day Training Course (Practical). This course was designed to also address the training needs of nuclear criticality safety professionals under the auspices of the NNSA Nuclear Criticality Safety Program1. The hands-on, or laboratory, portion of the course will utilizemore » the Training Assembly for Criticality Safety (TACS) and will be conducted in the Device Assembly Facility (DAF) at the Nevada Nuclear Security Site (NNSS). The training activities will be conducted by Lawrence Livermore National Laboratory following the requirements of an Integrated Work Sheet (IWS) and associated Safety Plan. Students will be allowed to handle the fissile material under the supervision of an LLNL Certified Fissile Material Handler.« less

Musculoskeletal disorders among workers in plastic manufacturing plants.

PubMed

Fernandes, Rita de Cássia Pereira; Assunção, Ada Avila; Silvany Neto, Annibal Muniz; Carvalho, Fernando Martins

2010-03-01

Epidemiological studies have indicated an association between musculoskeletal disorders (MSDs) and physical work demands. Psychosocial work demands have also been identified as possible risk factors, but findings have been inconsistent. To evaluate factors associated with upper back, neck and upper limb MSD among workers from 14 plastic manufacturing companies located in the city of Salvador, Brazil. A cross-sectional study design was used to survey a stratified proportional random sample of 577 workers. Data were collected by questionnaire interviews. Factor analysis was carried out on 11 physical demands variables. Psychosocial work demands were measured by demand, control and social support questions. The role of socio-demographic factors, lifestyle and household tasks was also examined. Multiple logistic regression was used to identify factors related to upper back, neck and upper limb MSDs. Results from multiple logistic regression showed that distal upper limb MSDs were related to manual handling, work repetitiveness, psychosocial demands, job dissatisfaction, and gender. Neck, shoulder or upper back MSDs were related to manual handling, work repetitiveness, psychosocial demands, job dissatisfaction, and physical unfitness. Reducing the prevalence of musculoskeletal disorders requires: improving the work environment, reducing biomechanical risk factors, and replanning work organization. Programs must also be aware of gender specificities related to MSDs.

Preventing musculoskeletal disorders in clinical dentistry: strategies to address the mechanisms leading to musculoskeletal disorders.

PubMed

Valachi, Bethany; Valachi, Keith

2003-12-01

The authors reviewed studies to identify methods for dental operators to use to prevent the development of musculoskeletal disorders, or MSDs. The authors reviewed studies that related to the prevention of MSDs among dental operators. Some studies investigated the relationship between the biomechanics of seated working postures and physiological damage or pain. Other studies suggested that repeated unidirectional twisting of the trunk can lead to low back pain, while yet other studies examined the detrimental effects of working in one position for prolonged periods. Additional studies confirmed the roles that operators' flexibility and core strength can play in balanced musculoskeletal health and the need for operators to know how to properly adjust ergonomic equipment. This review indicates that strategies to prevent the multifactorial problem of dental operators' developing MSDs exist. These strategies address deficiencies in operator position, posture, flexibility, strength and ergonomics. Education and additional research are needed to promote an understanding of the complexity of the problem and to address the problem's multifactorial nature. A comprehensive approach to address the problem of MSDs in dentistry represents a paradigm shift in how operators work. New educational models that incorporate a multifactorial approach can be developed to help dental operators manage and prevent MSDs effectively.

Consumer Products Containing Radioactive Materials

MedlinePlus

Fact Sheet Adopted: February 2010 Health Physics Society Specialists in Radiation Safety Consumer Products Containing Radioactive Materials Everything we encounter in our daily lives contains some radioactive material, ...

49 CFR 179.100-19 - Tests of safety relief valves.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Tests of safety relief valves. 179.100-19 Section... MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120...

75 FR 5536 - Pipeline Safety: Control Room Management/Human Factors, Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-03

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts...: Control Room Management/Human Factors, Correction AGENCY: Pipeline and Hazardous Materials Safety... following correcting amendments: PART 192--TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM...

Aerospace safety advisory panel

NASA Technical Reports Server (NTRS)

1994-01-01

This report from the Aerospace Safety Advisory Panel (ASAP) contains findings, recommendations, and supporting material concerning safety issues with the space station program, the space shuttle program, aeronautics research, and other NASA programs. Section two presents findings and recommendations, section three presents supporting information, and appendices contain data about the panel membership, the NASA response to the March 1993 ASAP report, and a chronology of the panel's activities during the past year.

76 FR 28326 - Pipeline Safety: National Pipeline Mapping System Data Submissions and Submission Dates for Gas...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-17

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR 191... Reports AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Issuance of... Pipeline and Hazardous Materials Safety Administration (PHMSA) published a final rule on November 26, 2010...

78 FR 34703 - Pipeline Safety: Information Collection Activities, Revision to Gas Distribution Annual Report

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-10

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2013-0004] Pipeline Safety: Information Collection Activities, Revision to Gas Distribution Annual Report AGENCY: Pipeline and Hazardous Materials Safety Administration, DOT. ACTION: Notice and request...

The acute lethal dose 50 (LD50) of caffeine in albino rats.

PubMed

Adamson, Richard H

2016-10-01

An acute LD50 is a statistically derived amount of a substance that can be expected to cause death in 50% of the animals when given by a specified route as a single dose and the animals observed for a specified time period. Although conducting routine acute toxicity testing in rodents has been criticized, it can serve useful functions and also have practical implications. Material safety data sheets (MSDS) will reflect the acute toxicity of a substance and may require workers to wear protective gear, if appropriate, based on the LD50. There is no information in the scientific published literature which calculates a mean LD50 and standard deviation for caffeine administered orally to rats, using studies performed under good laboratory practice (GLP) or equivalent. This report does that and should be useful to manufacturers, packagers, transporters and regulators of this material. Using data from studies that are reproducible and reliable, the most accurate estimate of the acute LD50 of caffeine administered orally in male albino rats is hereby reported to be 367/mg/kg. Copyright © 2016 Elsevier Inc. All rights reserved.

Effectiveness of Occupational Therapy Interventions for Lower-Extremity Musculoskeletal Disorders: A Systematic Review.

PubMed

Dorsey, Julie; Bradshaw, Michelle

Lower-extremity (LE) musculoskeletal disorders (MSDs) can have a major impact on the ability to carry out daily activities. The effectiveness of interventions must be examined to enable occupational therapy practitioners to deliver the most appropriate services. This systematic review examined the literature published between 1995 and July 2014 that investigated the effectiveness of occupational therapy interventions for LE MSDs. Forty-three articles met the criteria and were reviewed. Occupational therapy interventions varied on the basis of population subgroup: hip fracture, LE joint replacement, LE amputation or limb loss, and nonsurgical osteoarthritis and pain. The results indicate an overall strong role for occupational therapy in treating clients with LE MSDs. Activity pacing is an effective intervention for nonsurgical LE MSDs, and multidisciplinary rehabilitation is effective for LE joint replacement and amputation. Further research on specific occupational therapy interventions in this important area is needed. Copyright © 2017 by the American Occupational Therapy Association, Inc.

Relationship between musculoskeletal disorders, job demands, and burnout among emergency nurses.

PubMed

Sorour, Amany Sobhy; El-Maksoud, Mona M Abd

2012-01-01

Musculoskeletal disorders (MSDs) represent one of the most common occupational problems in nursing. MSDs can negatively impact one's quality of life. The aim of the study was to investigate the relationship between MSDs, job demands, and burnout among emergency nurses. The researchers hypothesized that increased job demands were associated with more MSDs and consequently higher levels of burnout. The study was conducted on a convenience sample of 58 nurses working in the emergency departments of Zagazig University Hospital and Al-Ahrar, Hospital Egypt from October to December 2010, using a cross-sectional analytic design. Data were collected using a self-administered questionnaire that included the Standardized Nordic Questionnaire, the Job Content Questionnaire, and the Maslach Burnout Inventory. The results revealed that 32.8% of the nurses were overweight and 17.2% were obese. The most common sites of pain were the neck (67.2%), shoulder (65.5%), and lower back (63.8%). Lower back pain was the most common site affected (72.4%) with a mean 5.1 on a scale ranging from 0 to 13. A positive correlation existed between the scores of job demand and burnout (r = 0.340, p < 0.01), and the number of reported MSDs with the score of job demand (r = 0.33, p < 0.05). Multiple linear stepwise regression analysis identified the score of job demand and the severity of lower back pain as positive independent predictors of the burnout whereas the job demand score was the independent predictor of the number of MSDs. This study documents an increased prevalence of MSDs among emergency nurses, as predicted by increased job demand and associated with a higher level of burnout. Hence, it is important for hospital and nursing administrators to address the factors contributing to job stress and burnout, with emphasis on job satisfaction and work organization to alleviate the burden of psychosocial factors in this setting.

Safety analysis report for packaging (onsite) steel drum

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCormick, W.A.

This Safety Analysis Report for Packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the steel drum packaging system meets the transportation safety requirements of HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments, for an onsite packaging containing Type B quantities of solid and liquid radioactive materials. The basic component of the steel drum packaging system is the 208 L (55-gal) steel drum.

Global road safety online course development.

DOT National Transportation Integrated Search

2017-06-01

The Global Road Safety Online Curriculum Development project involved the adaptation of in-person classroom materials and development of new materials to be used in an online setting. A short-course format was selected to pilot the course, and four t...

78 FR 41496 - Pipeline Safety: Meetings of the Gas and Liquid Pipeline Advisory Committees

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-10

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2013-0156] Pipeline Safety: Meetings of the Gas and Liquid Pipeline Advisory Committees AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice of advisory committee...

A Bibliographic Guide to Occupational Safety and Health.

ERIC Educational Resources Information Center

Pease, Sue

1981-01-01

Lists government publications, periodicals, loose-leaf services, reports, and reference materials dealing with health and safety in the work environment. Addresses for the Occupational Safety and Health Administration regional offices are provided. (FM)

Making the message meaningful: a qualitative assessment of media promoting all-terrain vehicle safety.

PubMed

Brann, Maria; Mullins, Samantha Hope; Miller, Beverly K; Eoff, Shane; Graham, James; Aitken, Mary E

2012-08-01

Millions of all-terrain vehicles (ATV) are used around the world for recreation by both adults and youth. This increase in use has led to a substantial increase in the number of injuries and fatalities each year. Effective strategies for reducing this incidence are clearly needed; however, minimal research exists regarding effective educational interventions. This study was designed to assess rural ATV riders' preferences for and assessment of safety messages. 13 focus group discussions with youth and adult ATV riders were conducted. 88 formative research participants provided feedback on existing ATV safety materials, which was used to develop more useful ATV safety messages. 60 evaluative focus group participants critiqued the materials developed for this project. Existing ATV safety materials have limited effectiveness, in part because they may not address the content or design needs of the target population. ATV riders want educational and action-oriented safety messages that inform youth and adult riders about their responsibilities to learn, educate and implement safety behaviours (eg, appropriate-sized ATV, safety gear, solo riding, speed limits, riding locations). In addition, messages should be clear, realistic, visually appealing and easily accessible. Newly designed ATV safety materials using the acronym TRIPSS (training, ride off-road, impairment, plan ahead, safety gear, single rider) meet ATV riders' safety messaging needs. To reach a target population, it is crucial to include them in the development and assessment of safety messages. Germane to this particular study, ATV riders provided essential information for creating useful ATV safety materials.

76 FR 25576 - Pipeline Safety: Applying Safety Regulations to All Rural Onshore Hazardous Liquid Low-Stress Lines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-05

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... to All Rural Onshore Hazardous Liquid Low-Stress Lines AGENCY: Pipeline and Hazardous Materials... burdensome to require operators of these pipelines to perform a complete ``could affect'' analysis to...

Microcounseling Skill Discrimination Scale: A Methodological Note

ERIC Educational Resources Information Center

Stokes, Joseph; Romer, Daniel

1977-01-01

Absolute ratings on the Microcounseling Skill Discrimination Scale (MSDS) confound the individual's use of the rating scale and actual ability to discriminate effective and ineffective counselor behaviors. This note suggests methods of scoring the MSDS that will eliminate variability attributable to response language and improve the validity of…

10 CFR 35.415 - Safety precautions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Safety precautions. 35.415 Section 35.415 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL Manual Brachytherapy § 35.415 Safety precautions. (a... his or her designee, and an authorized user as soon as possible if the patient or human research...

10 CFR 35.410 - Safety instruction.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Safety instruction. 35.410 Section 35.410 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL Manual Brachytherapy § 35.410 Safety instruction. In... designee, and an authorized user if the patient or the human research subject has a medical emergency or...

[Implementation of safety devices: biological accident prevention].

PubMed

Catalán Gómez, M Teresa; Sol Vidiella, Josep; Castellà Castellà, Manel; Castells Bo, Carolina; Losada Pla, Nuria; Espuny, Javier Lluís

2010-04-01

Accidental exposures to blood and biological material were the most frequent and potentially serious accidents in healthcare workers, reported in the Prevention of Occupational Risks Unit within 2002. Evaluate the biological percutaneous accidents decrease after a progressive introduction of safety devices. Biological accidents produced between 2.002 and 2.006 were analyzed and reported by the injured healthcare workers to the Level 2b Hospital Prevention of Occupational Risk Unit with 238 beds and 750 employees. The key of the study was the safety devices (peripheral i.v. catheter, needleless i.v. access device and capillary blood collection lancet). Within 2002, 54 percutaneous biological accidents were registered and 19 in 2006, that represents a 64.8% decreased. There has been no safety devices accident reported involving these material. Accidents registered during the implantation period occurred because safety devices were not used at that time. Safety devices have proven to be effective in reducing needle stick percutaneous accidents, so that they are a good choice in the primary prevention of biological accidents contact.

Physical and psychosocial risk factors for musculoskeletal disorders in New Zealand nurses, postal workers and office workers.

PubMed

Harcombe, Helen; McBride, David; Derrett, Sarah; Gray, Andrew

2010-04-01

To investigate the association of physical and psychosocial risk factors with musculoskeletal disorders (MSDs) in New Zealand nurses, postal workers and office workers. A cross-sectional postal survey asking about demographic, physical and psychosocial factors and MSDs. A total of 911 participants was randomly selected; nurses from the Nursing Council of New Zealand database (n=280), postal workers from their employer's database (n=280) and office workers from the 2005 electoral roll (n=351). Self-reported pain in the low back, neck, shoulder, elbow, wrist/hand or knee lasting more than 1 day in the month before the survey. The response rate was 58%, 443 from 770 potential participants. 70% (n=310) reported at least one MSDs. Physical work tasks were associated with low back (odds ratio (OR) 1.35, 95% CI 1.14 to 1.6), shoulder (OR 1.41, 95% CI 1.17 to 1.69), elbow (OR 1.14, 95% CI 1.13 to 1.83) and wrist/hand pain (OR 1.39, 95% CI 1.15 to 1.69). Job strain had the strongest association with neck pain (OR 3.46, 95% CI 1.30 to 9.21) and wrist/hand pain. Somatisation was weakly associated with MSDs at most sites. Better general and mental health status were weakly associated with lower odds of MSDs. In injury prevention and rehabilitation the physical nature of the work needs to be addressed for most MSDs, with modest decreases in risk seemingly possible. Addressing job strain could provide significant benefit for those with neck and wrist/hand pain, while the effects of somatisation and the promotion of good mental health may provide smaller but global benefits.

Prevalence of musculoskeletal symptoms among employees of Iranian petrochemical industries: October 2009 to December 2012.

PubMed

Choobineh, A R; Daneshmandi, H; Aghabeigi, M; Haghayegh, A

2013-10-01

Work-related musculoskeletal disorders (WMSDs) are a common health problem throughout the world and a major cause of disability in the workplace. To determine the prevalence rate of MSDs, assessment of ergonomics working conditions and identification of major risk factors associated with MSDs symptoms among employees of Iranian petrochemical industries between October 2009 and December 2012. In this study, we studied 1184 randomly selected employees of 4 Iranian petrochemical companies with at least one year of work experience in office or operational units. For those with office jobs, data were collected using Nordic Musculoskeletal disorders Questionnaire (NMQ) and ergonomics checklist for the assessment of working conditions. For those with operational jobs, NMQ and Quick Exposure Check (QEC) method were used for data collection. The most prevalent MSD symptoms were reported in lower back (41.5%) and neck (36.5%). The prevalence of MSDs in all body regions but elbows and thighs of the office staff was significantly higher than that of operational workers. Assessment of working conditions in office staff revealed that the lowest index was attributed to workstation. QEC technique among operational workers showed that in 73.8% of the workers studied, the level of exposure to musculoskeletal risks was "high" or "very high." MSDs were associated with type of job, age, body mass index, work experience, gender, marital status, educational level and type of employment. The prevalence of MSDs in the office staff was higher than that of operational workers. Level of exposure to MSDs risk was high in operational workers. Corrective measures are thus necessary for improving working conditions for both office and operational units.

Occupational Safety and Health Programs in Career Education.

ERIC Educational Resources Information Center

DiCarlo, Robert D.; And Others

This resource guide was developed in response to the Occupational Safety and Health Act of 1970 and is intended to assist teachers in implementing courses in occupational safety and health as part of a career education program. The material is a synthesis of films, programed instruction, slides and narration, case studies, safety pamphlets,…

An Overview of INEL Fusion Safety R&D Facilities

NASA Astrophysics Data System (ADS)

McCarthy, K. A.; Smolik, G. R.; Anderl, R. A.; Carmack, W. J.; Longhurst, G. R.

1997-06-01

The Fusion Safety Program at the Idaho National Engineering Laboratory has the lead for fusion safety work in the United States. Over the years, we have developed several experimental facilities to provide data for fusion reactor safety analyses. We now have four major experimental facilities that provide data for use in safety assessments. The Steam-Reactivity Measurement System measures hydrogen generation rates and tritium mobilization rates in high-temperature (up to 1200°C) fusion relevant materials exposed to steam. The Volatilization of Activation Product Oxides Reactor Facility provides information on mobilization and transport and chemical reactivity of fusion relevant materials at high temperature (up to 1200°C) in an oxidizing environment (air or steam). The Fusion Aerosol Source Test Facility is a scaled-up version of VAPOR. The ion-implanta-tion/thermal-desorption system is dedicated to research into processes and phenomena associated with the interaction of hydrogen isotopes with fusion materials. In this paper we describe the capabilities of these facilities.

24 CFR 3280.503 - Materials.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Materials. 3280.503 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Thermal Protection § 3280.503 Materials. Materials used for insulation shall be of proven effectiveness and adequate durability to assure that...

24 CFR 3280.503 - Materials.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Materials. 3280.503 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Thermal Protection § 3280.503 Materials. Materials used for insulation shall be of proven effectiveness and adequate durability to assure that...

24 CFR 3280.503 - Materials.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Materials. 3280.503 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Thermal Protection § 3280.503 Materials. Materials used for insulation shall be of proven effectiveness and adequate durability to assure that...

24 CFR 3280.503 - Materials.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Materials. 3280.503 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Thermal Protection § 3280.503 Materials. Materials used for insulation shall be of proven effectiveness and adequate durability to assure that...

24 CFR 3280.503 - Materials.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Materials. 3280.503 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Thermal Protection § 3280.503 Materials. Materials used for insulation shall be of proven effectiveness and adequate durability to assure that...

75 FR 48593 - Pipeline Safety: Periodic Updates of Regulatory References to Technical Standards and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-11

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts... AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), Department of Transportation (DOT... action allows pipeline operators to use current technologies, improved materials, and updated industry...

49 CFR 179.103-4 - Safety relief devices and pressure regulators.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Safety relief devices and pressure regulators. 179... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120...

77 FR 45417 - Pipeline Safety: Inspection and Protection of Pipeline Facilities After Railway Accidents

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Accidents AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. [[Page 45418

Research of Flammability of Fireproof Materials in Ship Safety

NASA Astrophysics Data System (ADS)

Jiang, Yizhou; Han, Duanfeng; Zhang, Ziwei

2017-09-01

This paper analyzes the classification, performance and application of ship fireproof and heat insulating materials, and describes the test standard and performance evaluation criteria of the non-combustibility, low flame-spread characteristics and smoke and toxicity of marine fireproof materials in detail. So the paper has certain reference value and guidance significance for the selection of heat insulating materials with fire divisions and the use of flammable materials on board in accordance with requirements.

Evaluation and redesign of manual material handling in a vaccine production centre's warehouse.

PubMed

Torres, Yaniel; Viña, Silvio

2012-01-01

This study was conducted in a warehouse at a vaccine production centre where improvement to existing storage and working conditions were sought through the construction of a new refrigerated store section (2-8C°). Warehousing tasks were videotaped and ergonomics analysis tools were used to assess the risk of developing MSDs. Specifically, these tools were the Rapid Entire Body Assessment (REBA) and the NIOSH equation. The current plant layout was sketched and analyzed to find possible targets for improvement trough the application of general work space design and ergonomics principles. Seven of the eight postures evaluated with REBA had a total score between 8 and 10, meaning a high risk, and only one was at a medium risk level. Nine of the eleven manual material handling tasks analyzed with the NIOSH equation had a Lifting Index between 1.14 and 1.80 and two had a recommended weight limit of 0 kg, indicating a need for job redesign. Solutions included the redesign of shelves, the design of a two-step stair and a trolley with adjustable height; also, changes in work methods were proposed by introducing a two-workers lifting strategy and job rotation, and, finally, a restructuring of plant layout was completed.

The Effect of Coaching on a Faith Community Volunteer's Use of Effective Teaching Behaviors

ERIC Educational Resources Information Center

Baggerman, Melanie A.; Ault, Melinda Jones; Collins, Belva C.; Spriggs, Amy D.; Slocum, Victoria

2015-01-01

An important part of quality of life for people with moderate and severe disabilities (MSDs) is being involved in extracurricular and community activities. However, volunteers, who may not have experience with including people with MSDs, lead most community activities. The purpose of this study was to demonstrate the effectiveness of teacher…

78 FR 65427 - Pipeline Safety: Reminder of Requirements for Liquefied Petroleum Gas and Utility Liquefied...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2013-0097] Pipeline Safety: Reminder of Requirements for Liquefied Petroleum Gas and Utility Liquefied Petroleum Gas Pipeline Systems AGENCY: Pipeline and Hazardous Materials Safety Administration...

49 CFR 178.338-2 - Material.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Material. 178.338-2 Section 178.338-2 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers for Motor Vehicle Transportation § 178.338-2 Material. (a) All material used in the construction...

49 CFR 178.338-2 - Material.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Material. 178.338-2 Section 178.338-2 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers for Motor Vehicle Transportation § 178.338-2 Material. (a) All material used in the construction...

49 CFR 178.338-2 - Material.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Material. 178.338-2 Section 178.338-2 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers for Motor Vehicle Transportation § 178.338-2 Material. (a) All material used in the construction...

49 CFR 178.338-2 - Material.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Material. 178.338-2 Section 178.338-2 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers for Motor Vehicle Transportation § 178.338-2 Material. (a) All material used in the construction...

14 CFR 27.603 - Materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Materials. 27.603 Section 27.603... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction General § 27.603 Materials. The suitability and durability of materials used for parts, the failure of which could adversely affect safety, must...

14 CFR 29.603 - Materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Materials. 29.603 Section 29.603... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.603 Materials. The suitability and durability of materials used for parts, the failure of which could adversely affect safety, must...

14 CFR 25.603 - Materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Materials. 25.603 Section 25.603... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction General § 25.603 Materials. The suitability and durability of materials used for parts, the failure of which could adversely affect safety, must...

14 CFR 27.603 - Materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Materials. 27.603 Section 27.603... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction General § 27.603 Materials. The suitability and durability of materials used for parts, the failure of which could adversely affect safety, must...

14 CFR 29.603 - Materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Materials. 29.603 Section 29.603... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.603 Materials. The suitability and durability of materials used for parts, the failure of which could adversely affect safety, must...

14 CFR 25.603 - Materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Materials. 25.603 Section 25.603... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction General § 25.603 Materials. The suitability and durability of materials used for parts, the failure of which could adversely affect safety, must...

Exploring the Solid Rocket Boosters and Properties of Matter

NASA Technical Reports Server (NTRS)

Moffett, Amy

2007-01-01

I worked for the United Space Alliance, LLC (USA) with the Solid Rocket Booster (SRB) Materials and Process engineers (M&P). I was assigned a project in which I needed to research and collect chemical and physical properties information, material safety data sheets (MSDS), and other product information from the vendor's websites and existing "inhouse" files for a select group of materials used in building and refurbishing the SRBs. This information was then compiled in a report that summarized the information collected. My work site was at the Kennedy Space Center (KSC). This allowed for many opportunities to visit and tour sites operated by NASA, by USA, and by the Air Force. This included the vehicle assembly building (VAB), orbital processing facilities (OPF), the crawler with the mobile launch pad (MLP), and the SRB assembly and refurbishment facility (ARF), to name a few. In addition, the launch, of STS- 117 took place within the first week of employment allowing a day by day following of that mission including post flight operations for the SRBs. Two Delta II rockets were also launched during these 7 weeks. The sights were incredible and the operations witnessed were amazing. I learned so many things I never knew about the entire program and the shuttle itself. The entire experience, especially my work with the SRB materials, inspired my plan for implementation into the classroom.

A Uniform Framework of Global Nuclear Materials Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dupree, S.A.; Mangan, D.L.; Sanders, T.L

1999-04-20

Global Nuclear Materials Management (GNMM) anticipates and supports a growing international recognition of the importance of uniform, effective management of civilian, excess defense, and nuclear weapons materials. We expect thereto be a continuing increase in both the number of international agreements and conventions on safety, security, and transparency of nuclear materials, and the number of U.S.-Russian agreements for the safety, protection, and transparency of weapons and excess defense materials. This inventory of agreements and conventions may soon expand into broad, mandatory, international programs that will include provisions for inspection, verification, and transparency, To meet such demand the community must buildmore » on the resources we have, including State agencies, the IAEA and regional organizations. By these measures we will meet the future expectations for monitoring and inspection of materials, maintenance of safety and security, and implementation of transparency measures.« less

49 CFR 178.338-2 - Material.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Material. 178.338-2 Section 178.338-2 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS FOR PACKAGINGS...

49 CFR 178.255-2 - Material.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Material. 178.255-2 Section 178.255-2 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS FOR PACKAGINGS...

75 FR 53733 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2010-0246] Pipeline Safety: Information Collection Activities AGENCY: Pipeline and Hazardous... liquefied natural gas, hazardous liquid, and gas transmission pipeline systems operated by a company. The...

A Web-based Alternative Non-animal Method Database for Safety Cosmetic Evaluations.

PubMed

Kim, Seung Won; Kim, Bae-Hwan

2016-07-01

Animal testing was used traditionally in the cosmetics industry to confirm product safety, but has begun to be banned; alternative methods to replace animal experiments are either in development, or are being validated, worldwide. Research data related to test substances are critical for developing novel alternative tests. Moreover, safety information on cosmetic materials has neither been collected in a database nor shared among researchers. Therefore, it is imperative to build and share a database of safety information on toxicological mechanisms and pathways collected through in vivo, in vitro, and in silico methods. We developed the CAMSEC database (named after the research team; the Consortium of Alternative Methods for Safety Evaluation of Cosmetics) to fulfill this purpose. On the same website, our aim is to provide updates on current alternative research methods in Korea. The database will not be used directly to conduct safety evaluations, but researchers or regulatory individuals can use it to facilitate their work in formulating safety evaluations for cosmetic materials. We hope this database will help establish new alternative research methods to conduct efficient safety evaluations of cosmetic materials.

49 CFR 178.33-5 - Material.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Material. 178.33-5 Section 178.33-5 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS FOR PACKAGINGS Specifications for...

78 FR 46560 - Pipeline Safety: Class Location Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... class location requirements for gas transmission pipelines. Section 5 of the Pipeline Safety, Regulatory... and, with respect to gas transmission pipeline facilities, whether applying IMP requirements to...

Hazardous materials: chemistry and safe handling aspects of flammable, toxic and radioactive materials. A course of study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, M.W.

1983-01-01

The subject of this dissertation is a one semester, three credit course designed for students who have taken at least twelve credits college chemistry, and for high school teachers as a continuing education course. The need for such a course arises from the increased concern for safety in recent years and the introduction of many regulations of which the working chemist should be aware, notably those issued by the Occupational Safety and Health Administration. A few colleges have recently started to offer courses in laboratory safety to undergraduate and graduate chemistry students. Thus, there is a need for the developmentmore » of courses in which chemical safety is taught. This course is divided into three units: 1) flammable materials; 2) toxic materials; and 3) radioactive materials. Each unit is self contained and could be taught separately as a one credit course. The material necessary for lecture presentation is given in the text of this dissertation: there are about seven topics in each unit. The chemical properties of selected substances are emphasized. Examples of governmental regulations are given, and there are sample examination questions for each unit and homework assignments that require the use of reference sources. Laboratory exercises are included to enable students to gain experience in the safe handling of hazardous chemicals and of some equipment and instruments used to analyze and study flammable, toxic and radioactive materials.« less

10 CFR 32.23 - Same: Safety criteria.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Same: Safety criteria. 32.23 Section 32.23 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.23 Same: Safety criteria. An applicant for a license...

10 CFR 32.27 - Same: Safety criteria.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Same: Safety criteria. 32.27 Section 32.27 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.27 Same: Safety criteria. An applicant for a license...

Safety concerns in composite manufacturing and machining

NASA Astrophysics Data System (ADS)

Asmatulu, Eylem; Alonayni, Abdullah; Alamir, Mohammed

2018-03-01

Because of the superior properties, composites have been used in many industrial applications, including aerospace, wind turbines, ships, cars, fishing rods, storage tanks, swimming pool panels, and baseball bats. Each application may require different combinations of reinforcements and matrices, which make the manufacturing safety even more challenging while working on these substances. In this study, safety issues in composite manufacturing and machining were investigated in detail, and latest developments were provided for workers. The materials most frequently used in composite manufacturing, such as matrix (polyester, vinylester, phenolic, epoxies, methyl ethyl ketone peroxide, benzoil peroxide, hardeners, and solvents), and reinforcement materials (carbon, glass and Kevlar fibers, honeycomb and foams) can be highly toxic to human body. These materials can also be very toxic to the environment when dumped out uncontrollably, creating major future health and environmental concerns. Throughout the manufacturing process, workers inhale vapors of the liquid matrix, hardeners and solvents / thinners, as well as reinforcement materials (chopped fibers and particles) in airborne. Milling, cutting and machining of the composites can further increase the toxic inhalations of airborne composite particles, resulting in major rashes, irritation, skin disorders, coughing, severe eye and lung injury and other serious illnesses. The major portions of these hazardous materials can be controlled using appropriate personal protective equipment for the chemicals and materials used in composite manufacturing and machining. This study provides best possible safety practices utilized in composite manufacturing facilities for workers, engineers and other participants.

Safety management of complex research operations

NASA Technical Reports Server (NTRS)

Brown, W. J.

1981-01-01

Complex research and technology operations present many varied potential hazards which must be addressed in a disciplined independent safety review and approval process. The research and technology effort at the Lewis Research Center is divided into programmatic areas of aeronautics, space and energy. Potential hazards vary from high energy fuels to hydrocarbon fuels, high pressure systems to high voltage systems, toxic chemicals to radioactive materials and high speed rotating machinery to high powered lasers. A Safety Permit System presently covers about 600 potentially hazardous operations. The Safety Management Program described in this paper is believed to be a major factor in maintaining an excellent safety record at the Lewis Research Center.

Fire Resistant Materials

NASA Technical Reports Server (NTRS)

1982-01-01

Fire hazard is greater in atmospheres containing a high percentage of oxygen under pressure. NASA intensified its fire safety research after a 1967 Apollo fire. A chemically treated fabric called Durette developed by Monsanto Company, which will not burn or produce noxious fumes, was selected as a material for Apollo astronaut garments. Monsanto sold production rights for this material to Fire Safe Products (FSP). Durette is now used for a wide range of applications such as: sheets, attendants' uniforms in hyperbaric chambers; crew's clothing, furniture and interior walls of diving chambers operated by the U.S. Navy and other oceanographic companies and research organizations. Pyrotect Safety Equipment, Minneapolis, MN produces Durette suits for auto racers, refuelers and crew chiefs from material supplied by FSP. FSP also manufactures Durette bags for filtering gases and dust from boilers, electric generators and similar systems. Durette bags are an alternative to other felted fiber capable of operating at high temperature that cost twice as much.

49 CFR 178.255-2 - Material.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Material. 178.255-2 Section 178.255-2 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Portable Tanks § 178.255-2 Material. (a) Material used in the tank must be steel of good weldable quality...

49 CFR 178.255-2 - Material.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Material. 178.255-2 Section 178.255-2 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Portable Tanks § 178.255-2 Material. (a) Material used in the tank must be steel of good weldable quality...

49 CFR 178.255-2 - Material.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Material. 178.255-2 Section 178.255-2 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Portable Tanks § 178.255-2 Material. (a) Material used in the tank must be steel of good weldable quality...

49 CFR 178.255-2 - Material.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Material. 178.255-2 Section 178.255-2 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Portable Tanks § 178.255-2 Material. (a) Material used in the tank must be steel of good weldable quality...

49 CFR 179.201-4 - Material.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.201-4 Material. All fittings...

Fire Signatures of Materials Used in Spacecraft Construction

NASA Technical Reports Server (NTRS)

Taylor, Christina

2003-01-01

The focus of my work this summer was fire safety, specifically determining fire signatures from the combustion of materials commonly found in the construction of spacecraft. This project was undertaken with the aim of addressing concerns for health and safety onboard spacecraft. Under certain conditions, burning electronics produce surprisingly large amounts of acrid smoke, release fine airborne particles and expel condensable aerosols. Similarly, some wire insulation and packing material evolves smoke when in contact with a hot surface. In the limited, enclosed space available on spacecraft, these combustion products may pose a nuisance at the very least - at worst, a hazard to health or equipment. There is also a concern for fire safety in early detection on spacecraft. Our goal for the summer was to determine the most effective methods to test the materials, develop a protocol for sampling, and generate samples for analysis. We restricted our testing to electronic components, packaging and insulation materials, and wire insulation materials.

14 CFR § 1274.936 - Breach of safety or security.

Code of Federal Regulations, 2014 CFR

2014-01-01

... environment. Safety is essential to NASA and is a material part of this contract. NASA's safety priority is to... Occupational Safety and Health Administration (OSHA) or by a state agency operating under an OSHA approved plan... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Breach of safety or security. § 1274.936...

Orientation to Machine Shop. Safety, Machine Identification, Metal Identification.

ERIC Educational Resources Information Center

Engelbrecht, Nancy; And Others

These instructional materials provide an orientation to the machine shop for use at the postsecondary level. The first of three sections discusses four important areas of safety: (1) personal safety; (2) safety procedures; (3) safe work practices; and (4) fire prevention. The second section identifies and describes the general purposes of 12…

The Prospect of Motorcycle Safety Education in Secondary Schools.

ERIC Educational Resources Information Center

King, Alfred S.

Motorcycle safety education will become a necessity in the near future due to the growing demands of secondary students for education in this area. The Motorcycle Safety Foundation is sponsored by major motorcycle industries and is involved with developing programs and materials to promote motorcycle safety education. The high rate of motorcycle…

76 FR 47262 - Brookwood-Sago Mine Safety Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-04

... industry during the current reporting period. Pre-test and post- test results of trainees. Course... funding ends. 2. Agency creates training Increase number of Pre-test and post- materials and improves quality educational test results of the safety. materials developed. training materials. Provide quality...

Sickness absence due to different musculoskeletal diagnoses by occupational class: a register-based study among 1.2 million Finnish employees.

PubMed

Pekkala, Johanna; Rahkonen, Ossi; Pietiläinen, Olli; Lahelma, Eero; Blomgren, Jenni

2018-04-01

Those in lower occupational classes have an increased risk of sickness absence due to musculoskeletal diseases (MSDs), but studies examining the associations simultaneously across specified diagnostic groups within MSDs are lacking. We examined occupational class differences in the occurrence and length of long-term sickness absence due to different musculoskeletal diagnoses. A 70% random sample of employed Finns aged 25-64 years old at the end of 2013 was linked to data on sickness absence of over 10 working days obtained from The Social Insurance Institution of Finland and occupational class from Statistics Finland. Sickness absences due to MSDs initiated in 2014 were followed until the end of each episode for female (n=675 636) and male (n=604 715) upper non-manuals, lower non-manuals and manual workers. Negative binomial hurdle models were used to analyse the associations. Within the studied MSDs, the most common causes of absence were back disorders, particularly back pain, and shoulder disorders. Osteoarthritis, disc disorders and rheumatoid arthritis induced the longest episodes of absence. Clear hierarchical class differences were found throughout, but the magnitude of the differences varied across the diagnostic causes. The largest class differences in the occurrence were detected in shoulder disorders and back pain. The class differences in length were greatest in rheumatoid arthritis, disc disorders and, among men, also in hip osteoarthritis. Hierarchical occupational class differences were found across different MSDs, with large differences in back and shoulder disorders. Occupational class and diagnosis should be considered when attempting to reduce sickness absence due to MSDs. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Directory of aerospace safety specialized information sources

NASA Technical Reports Server (NTRS)

Fullerton, E. A.; Rubens, L. S.; Mandel, G.; Mckenna, P. J.

1974-01-01

Directory aids safety specialists in locating information sources and individual experts in engineering-related fields. Lists 170 organizations and approximately 300 individuals who can provide safety-related technical information in form of documentation, data, and consulting expertise. Information on hazard and failure cause identification, accident analysis, and materials characteristics are covered.

2011 Annual Criticality Safety Program Performance Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrea Hoffman

The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection,more » an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The TSR limits

Manual materials handling: knowledge and practices among Portuguese health and safety practitioners.

PubMed

Arezes, Pedro M; Miguel, A Sérgio; Colim, Ana S

2011-01-01

There are several methodologies to assess the risk involved in Manual Materials Handling (MMH). The aim of this study was to identify the knowledge and use of risk assessment methods among Portuguese Health and Safety (H&S) practitioners. The study involved the participation of 331 H&S practitioners and other related prevention professionals. An e-mail invitation to complete an online survey was sent to all Portuguese registered H&S practitioners. The previously developed and validated questionnaire included three different sections: (1) company characteristics; (2) description of types of MMH tasks performed; and (3) the respondents' use of and knowledge about risk assessment methods for MMH tasks. The answers obtained were collected from almost 350 companies. The characteristics of the companies showed that there is a predominance of external and internal H&S services for Small and Medium sized Enterprises (SMEs) and large companies, respectively. The NIOSH equation, Key Indicator Method (KIM) and Manual Assessment Chart (MAC) were identified as the most used and recognised risk assessment methods. Questionnaire results show that an important number of Portuguese H&S practitioners recognise some methods but have difficulty applying them correctly. Some practitioners reported that they had never used any type of risk assessment method.

Inflammation and the pathophysiology of work-related musculoskeletal disorders.

PubMed

Barbe, Mary F; Barr, Ann E

2006-09-01

Work-related musculoskeletal disorders (MSDs) have accounted for a significant proportion of work injuries and workers' compensation claims in industrialized nations since the late 1980s. Despite epidemiological evidence for the role of repetition and force in the onset and progression of work-related MSDs, complete understanding of these important occupational health problems requires further elucidation of pathophysiological mechanisms of the tissue response, particularly in the early stage of these disorders. Results from several clinical and experimental studies indicate that tissue microtraumas occur as a consequence of performing repetitive and/or forceful tasks, and that this mechanical tissue injury leads to local and perhaps even systemic inflammation, followed by fibrotic and structural tissue changes. Here we review work linking inflammation and the development of work-related MSDs. We also propose a conceptual framework suggesting the potential roles that inflammation may play in these disorders, and how inflammation may contribute to pain, motor dysfunction, and to puzzling psychological symptoms that are often characteristic of patients with work-related MSDs.

Tool development to assess the work related neck and upper limb musculoskeletal disorders among female garment workers in Sri-Lanka.

PubMed

Amarasinghe, Nirmalie Champika; De AlwisSenevirathne, Rohini

2016-10-17

Musculoskeletal disorders (MSDs) have been identified as a predisposing factor for lesser productivity, but no validated tool has been developed to assess them in the Sri- Lankan context. To develop a validated tool to assess the neck and upper limb MSDs. It comprises three components: item selections, item reduction using principal component analysis, and validation. A tentative self-administrated questionnaire was developed, translated, and pre-tested. Four important domains - neck, shoulder, elbow and wrist - were identified through principal component analysis. Prevalence of any MSDs was 38.1% and prevalence of neck, shoulder, elbow and wrist MSDs are 12.85%, 13.71%, 12%, 13.71% respectively. Content and criterion validity of the tool was assessed. Separate ROC curves were produced and sensitivity and specificity of neck (83.1%, 71.7%), shoulder (97.6%, 91.9%), elbow (98.2%, 87.2%), and wrist (97.6%, 94.9%) was determined. Cronbach's Alpha and correlation coefficient was above 0.7. The tool has high sensitivity, specificity, internal consistency, and test re-test reliability.

A New Radiometric Calibration Paradigm for the OMPS Nadir Total Column and Profile Instruments

NASA Technical Reports Server (NTRS)

Heath, Donald; Georgiew, Georgi

2011-01-01

A fused silica Mie Scattering Diffuser (MSD) has been developed at Ball Aerospace & Technology Corp. that has measured characteristics which could be used to increase the accuracy of the spectral albedo calibration of the Ozone Mapping and Profiler Suite (OMPS) Nadir ozone total column and profile instrument by almost an order of magnitude. Measurements have been made of the optical characteristics on both natural and synthetic forms of fused silica MSDs. Preliminary measurements suggest that MSDs are useable in the solar reflective wavelength region from 250 nm to 3.7 m. To date synthetic and natural MSDs have been irradiated for 60 hours of UV radiation from a solar simulator, and synthetic MSDs have been irradiated with increasing doses of Co-60 gamma rays at 30, 500 krads up to 1.5 Mrads, and 30 krads of 200 MeV protons. The principal effects have been small loses in transmittance at wavelengths < 350 nm. The high energy particle irradiation measurements were provided by Neal Nickles and Dean Spieth.

The Influence of Laboratory Safety on Capital Planning.

ERIC Educational Resources Information Center

Francis, Robert A.

1980-01-01

Discusses state and federal legislation concerning the handling of dangerous materials and its impact on the design of college and university buildings. Lists federal legislation affecting laboratory safety, the objectives of each act, and the influence of each act on laboratory safety. (IRT)

75 FR 73160 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-29

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No...-Related Conditions on Gas, Hazardous Liquid, and Carbon Dioxide Pipelines and Liquefied Natural Gas... Pipelines and Liquefied Natural Gas Facilities.'' The Pipeline Safety Laws (49 U.S.C. 60132) require each...

Safety Standard for Hydrogen and Hydrogen Systems: Guidelines for Hydrogen System Design, Materials Selection, Operations, Storage and Transportation. Revision

NASA Technical Reports Server (NTRS)

1997-01-01

The NASA Safety Standard, which establishes a uniform process for hydrogen system design, materials selection, operation, storage, and transportation, is presented. The guidelines include suggestions for safely storing, handling, and using hydrogen in gaseous (GH2), liquid (LH2), or slush (SLH2) form whether used as a propellant or non-propellant. The handbook contains 9 chapters detailing properties and hazards, facility design, design of components, materials compatibility, detection, and transportation. Chapter 10 serves as a reference and the appendices contained therein include: assessment examples; scaling laws, explosions, blast effects, and fragmentation; codes, standards, and NASA directives; and relief devices along with a list of tables and figures, abbreviations, a glossary and an index for ease of use. The intent of the handbook is to provide enough information that it can be used alone, but at the same time, reference data sources that can provide much more detail if required.

49 CFR 179.300-7 - Materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Multi-Unit Tank Car Tanks (Classes DOT-106A and 110AW) § 179.300-7 Materials. (a) Steel plate material used...

49 CFR 179.300-7 - Materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Multi-Unit Tank Car Tanks (Classes DOT-106A and 110AW) § 179.300-7 Materials. (a) Steel plate material used...

77 FR 2126 - Pipeline Safety: Implementation of the National Registry of Pipeline and Liquefied Natural Gas...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

... Natural Gas Operators AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No...: ``Pipeline Safety: Updates to Pipeline and Liquefied Natural Gas Reporting Requirements.'' The final rule...

Oklahoma Curriculum Guide for Teaching Safety Education.

ERIC Educational Resources Information Center

Oklahoma Curriculum Improvement Commission, Oklahoma City.

Developed by classroom teachers, university professors, and personnel from the Oklahoma State Department of Education, this guide is an effort to assist teachers in locating and utilizing safety materials as well as to assist them in developing well-balanced safety programs for the children and young people in the state. The preschool and…

77 FR 75699 - Pipeline Safety: Reporting of Exceedances of Maximum Allowable Operating Pressure

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-21

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION: Notice; Issuance of... occurs. This reporting requirement is applicable to all gas transmission pipeline facility owners and...

A Web-based Alternative Non-animal Method Database for Safety Cosmetic Evaluations

PubMed Central

Kim, Seung Won; Kim, Bae-Hwan

2016-01-01

Animal testing was used traditionally in the cosmetics industry to confirm product safety, but has begun to be banned; alternative methods to replace animal experiments are either in development, or are being validated, worldwide. Research data related to test substances are critical for developing novel alternative tests. Moreover, safety information on cosmetic materials has neither been collected in a database nor shared among researchers. Therefore, it is imperative to build and share a database of safety information on toxicological mechanisms and pathways collected through in vivo, in vitro, and in silico methods. We developed the CAMSEC database (named after the research team; the Consortium of Alternative Methods for Safety Evaluation of Cosmetics) to fulfill this purpose. On the same website, our aim is to provide updates on current alternative research methods in Korea. The database will not be used directly to conduct safety evaluations, but researchers or regulatory individuals can use it to facilitate their work in formulating safety evaluations for cosmetic materials. We hope this database will help establish new alternative research methods to conduct efficient safety evaluations of cosmetic materials. PMID:27437094