A new multicriteria risk mapping approach based on a multiattribute frontier concept.

PubMed

Yemshanov, Denys; Koch, Frank H; Ben-Haim, Yakov; Downing, Marla; Sapio, Frank; Siltanen, Marty

2013-09-01

Invasive species risk maps provide broad guidance on where to allocate resources for pest monitoring and regulation, but they often present individual risk components (such as climatic suitability, host abundance, or introduction potential) as independent entities. These independent risk components are integrated using various multicriteria analysis techniques that typically require prior knowledge of the risk components' importance. Such information is often nonexistent for many invasive pests. This study proposes a new approach for building integrated risk maps using the principle of a multiattribute efficient frontier and analyzing the partial order of elements of a risk map as distributed in multidimensional criteria space. The integrated risks are estimated as subsequent multiattribute frontiers in dimensions of individual risk criteria. We demonstrate the approach with the example of Agrilus biguttatus Fabricius, a high-risk pest that may threaten North American oak forests in the near future. Drawing on U.S. and Canadian data, we compare the performance of the multiattribute ranking against a multicriteria linear weighted averaging technique in the presence of uncertainties, using the concept of robustness from info-gap decision theory. The results show major geographic hotspots where the consideration of tradeoffs between multiple risk components changes integrated risk rankings. Both methods delineate similar geographical regions of high and low risks. Overall, aggregation based on a delineation of multiattribute efficient frontiers can be a useful tool to prioritize risks for anticipated invasive pests, which usually have an extremely poor prior knowledge base. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

Estimation of a Preference-Based Summary Score for the Patient-Reported Outcomes Measurement Information System: The PROMIS®-Preference (PROPr) Scoring System.

PubMed

Dewitt, Barry; Feeny, David; Fischhoff, Baruch; Cella, David; Hays, Ron D; Hess, Rachel; Pilkonis, Paul A; Revicki, Dennis A; Roberts, Mark S; Tsevat, Joel; Yu, Lan; Hanmer, Janel

2018-06-01

Health-related quality of life (HRQL) preference-based scores are used to assess the health of populations and patients and for cost-effectiveness analyses. The National Institutes of Health Patient-Reported Outcomes Measurement Information System (PROMIS ® ) consists of patient-reported outcome measures developed using item response theory. PROMIS is in need of a direct preference-based scoring system for assigning values to health states. To produce societal preference-based scores for 7 PROMIS domains: Cognitive Function-Abilities, Depression, Fatigue, Pain Interference, Physical Function, Sleep Disturbance, and Ability to Participate in Social Roles and Activities. Online survey of a US nationally representative sample ( n = 983). Preferences for PROMIS health states were elicited with the standard gamble to obtain both single-attribute scoring functions for each of the 7 PROMIS domains and a multiplicative multiattribute utility (scoring) function. The 7 single-attribute scoring functions were fit using isotonic regression with linear interpolation. The multiplicative multiattribute summary function estimates utilities for PROMIS multiattribute health states on a scale where 0 is the utility of being dead and 1 the utility of "full health." The lowest possible score is -0.022 (for a state viewed as worse than dead), and the highest possible score is 1. The online survey systematically excludes some subgroups, such as the visually impaired and illiterate. A generic societal preference-based scoring system is now available for all studies using these 7 PROMIS health domains.

Evaluation of ilmenite serpentine concrete and ordinary concrete as nuclear reactor shielding

NASA Astrophysics Data System (ADS)

Abulfaraj, Waleed H.; Kamal, Salah M.

1994-07-01

The present study involves adapting a formal decision methodology to the selection of alternative nuclear reactor concretes shielding. Multiattribute utility theory is selected to accommodate decision makers' preferences. Multiattribute utility theory (MAU) is here employed to evaluate two appropriate nuclear reactor shielding concretes in terms of effectiveness to determine the optimal choice in order to meet the radiation protection regulations. These concretes are Ordinary concrete (O.C.) and Ilmenite Serpentile concrete (I.S.C.). These are normal weight concrete and heavy heat resistive concrete, respectively. The effectiveness objective of the nuclear reactor shielding is defined and structured into definite attributes and subattributes to evaluate the best alternative. Factors affecting the decision are dose received by reactor's workers, the material properties as well as cost of concrete shield. A computer program is employed to assist in performing utility analysis. Based upon data, the result shows the superiority of Ordinary concrete over Ilmenite Serpentine concrete.

Decision theory and the evaluation of risks and benefits of clinical trials.

PubMed

Bernabe, Rosemarie D C; van Thiel, Ghislaine J M W; Raaijmakers, Jan A M; van Delden, Johannes J M

2012-12-01

Research ethics committees (RECs) are tasked to assess the risks and the benefits of a clinical trial. In previous studies, it was shown that RECs find this task difficult, if not impossible, to do. The current approaches to benefit-risk assessment (i.e. Component Analysis and the Net Risk Test) confound the various risk-benefit tasks, and as such, make balancing impossible. In this article, we show that decision theory, specifically through the expected utility theory and multiattribute utility theory, enable for an explicit and ethically weighted risk-benefit evaluation. This makes a balanced ethical justification possible, and thus a more rationally defensible decision making. Copyright © 2012 Elsevier Ltd. All rights reserved.

A Quadrupole Dalton-based multi-attribute method for product characterization, process development, and quality control of therapeutic proteins.

PubMed

Xu, Weichen; Jimenez, Rod Brian; Mowery, Rachel; Luo, Haibin; Cao, Mingyan; Agarwal, Nitin; Ramos, Irina; Wang, Xiangyang; Wang, Jihong

2017-10-01

During manufacturing and storage process, therapeutic proteins are subject to various post-translational modifications (PTMs), such as isomerization, deamidation, oxidation, disulfide bond modifications and glycosylation. Certain PTMs may affect bioactivity, stability or pharmacokinetics and pharmacodynamics profile and are therefore classified as potential critical quality attributes (pCQAs). Identifying, monitoring and controlling these PTMs are usually key elements of the Quality by Design (QbD) approach. Traditionally, multiple analytical methods are utilized for these purposes, which is time consuming and costly. In recent years, multi-attribute monitoring methods have been developed in the biopharmaceutical industry. However, these methods combine high-end mass spectrometry with complicated data analysis software, which could pose difficulty when implementing in a quality control (QC) environment. Here we report a multi-attribute method (MAM) using a Quadrupole Dalton (QDa) mass detector to selectively monitor and quantitate PTMs in a therapeutic monoclonal antibody. The result output from the QDa-based MAM is straightforward and automatic. Evaluation results indicate this method provides comparable results to the traditional assays. To ensure future application in the QC environment, this method was qualified according to the International Conference on Harmonization (ICH) guideline and applied in the characterization of drug substance and stability samples. The QDa-based MAM is shown to be an extremely useful tool for product and process characterization studies that facilitates facile understanding of process impact on multiple quality attributes, while being QC friendly and cost-effective.

Decision Making Methods in Space Economics and Systems Engineering

NASA Technical Reports Server (NTRS)

Shishko, Robert

2006-01-01

This viewgraph presentation reviews various methods of decision making and the impact that they have on space economics and systems engineering. Some of the methods discussed are: Present Value and Internal Rate of Return (IRR); Cost-Benefit Analysis; Real Options; Cost-Effectiveness Analysis; Cost-Utility Analysis; Multi-Attribute Utility Theory (MAUT); and Analytic Hierarchy Process (AHP).

Research on probabilistic information processing

NASA Technical Reports Server (NTRS)

Edwards, W.

1973-01-01

The work accomplished on probabilistic information processing (PIP) is reported. The research proposals and decision analysis are discussed along with the results of research on MSC setting, multiattribute utilities, and Bayesian research. Abstracts of reports concerning the PIP research are included.

Multiattribute Fixed-State Utility Assessment.

DTIC Science & Technology

1981-03-27

of a companion distribution, are presented in Appendix A. Because of the theory of conditional expected utility and the modelling of the utilities by...obtain approximations to the moments, using the companion V ) ) distribution discussed in Section 3. The moments of both distributions are discussed...1956b, 21, 207-216. Slavic, P. "From Shakespeare to Simon: Speculation -- and some evidence -- about man’s ability to process information." O g . a

Screening and Evaluation Tool (SET) Users Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pincock, Layne

This document is the users guide to using the Screening and Evaluation Tool (SET). SET is a tool for comparing multiple fuel cycle options against a common set of criteria and metrics. It does this using standard multi-attribute utility decision analysis methods.

New Tools and Methods for Assessing Risk-Management Strategies

DTIC Science & Technology

2004-03-01

Theories to evaluate the risks and benefits of various acquisition alternatives and allowed researchers to monitor the process students used to make a...revealed distinct risk-management strategies. 15. SUBJECT TERMS risk managements, acquisition process, expected value theory , multi-attribute utility theory ...Utility Theories to evaluate the risks and benefits of various acquisition alternatives, and allowed us to monitor the process subjects used to arrive at

Use of multiattribute utility theory for formulary management in a health system.

PubMed

Chung, Seonyoung; Kim, Sooyon; Kim, Jeongmee; Sohn, Kieho

2010-01-15

The application, utility, and flexibility of the multiattribute utility theory (MAUT) when used as a formulary decision methodology in a Korean medical center were evaluated. A drug analysis model using MAUT consisting of 10 steps was designed for two drug classes of dihydropyridine calcium channel blockers (CCBs) and angiotensin II receptor blockers (ARBs). These two drug classes contain the most diverse agents among cardiovascular drugs on Samsung Medical Center's drug formulary. The attributes identified for inclusion in the drug analysis model were effectiveness, safety, patient convenience, and cost, with relative weights of 50%, 30%, 10%, and 10%, respectively. The factors were incorporated into the model to quantify the contribution of each attribute. For each factor, a utility scale of 0-100 was established, and the total utility score for each alternative was calculated. An attempt was made to make the model adaptable to changing health care and regulatory circumstances. The analysis revealed amlodipine besylate to be an alternative agent, with the highest total utility score among the dihydropyridine CCBs, while barnidipine hydrochloride had the lowest score. For ARBs, losartan potassium had the greatest total utility score, while olmesartan medoxomil had the lowest. A drug analysis model based on the MAUT was successfully developed and used in making formulary decisions for dihydropyridine CCBs and ARBs for a Korean health system. The model incorporates sufficient utility and flexibility of a drug's attributes and can be used as an alternative decision-making tool for formulary management in health systems.

Mapping between 6 Multiattribute Utility Instruments.

PubMed

Chen, Gang; Khan, Munir A; Iezzi, Angelo; Ratcliffe, Julie; Richardson, Jeff

2016-02-01

Cost-utility analyses commonly employ a multiattribute utility (MAU) instrument to estimate the health state utilities, which are needed to calculate quality-adjusted life years. Different MAU instruments predict significantly different utilities, which makes comparison of results from different evaluation studies problematical. This article presents mapping functions ("crosswalks") from 6 MAU instruments (EQ-5D-5L, SF-6D, Health Utilities Index 3 [HUI 3], 15D, Quality of Well-Being [QWB], and Assessment of Quality of Life 8D [AQoL-8D]) to each of the other 5 instruments in the study: a total of 30 mapping functions. Data were obtained from a multi-instrument comparison survey of the public and patients in 7 disease areas conducted in 6 countries (Australia, Canada, Germany, Norway, United Kingdom, and United States). The 8022 respondents were administered each of the 6 study instruments. Mapping equations between each instrument pair were estimated using 4 econometric techniques: ordinary least squares, generalized linear model, censored least absolute deviations, and, for the first time, a robust MM-estimator. Goodness-of-fit indicators for each of the results are within the range of published studies. Transformations reduced discrepancies between predicted utilities. Incremental utilities, which determine the value of quality-related health benefits, are almost perfectly aligned at the sample means. Transformations presented here align the measurement scales of MAU instruments. Their use will increase confidence in the comparability of evaluation studies, which have employed different MAU instruments. © The Author(s) 2015.

Assessment of Trading Partners for China's Rare Earth Exports Using a Decision Analytic Approach

PubMed Central

He, Chunyan; Lei, Yalin; Ge, Jianping

2014-01-01

Chinese rare earth export policies currently result in accelerating its depletion. Thus adopting an optimal export trade selection strategy is crucial to determining and ultimately identifying the ideal trading partners. This paper introduces a multi-attribute decision-making methodology which is then used to select the optimal trading partner. In the method, an evaluation criteria system is established to assess the seven top trading partners based on three dimensions: political relationships, economic benefits and industrial security. Specifically, a simple additive weighing model derived from an additive utility function is utilized to calculate, rank and select alternatives. Results show that Japan would be the optimal trading partner for Chinese rare earths. The criteria evaluation method of trading partners for China's rare earth exports provides the Chinese government with a tool to enhance rare earth industrial policies. PMID:25051534

Assessment of trading partners for China's rare earth exports using a decision analytic approach.

PubMed

He, Chunyan; Lei, Yalin; Ge, Jianping

2014-01-01

Chinese rare earth export policies currently result in accelerating its depletion. Thus adopting an optimal export trade selection strategy is crucial to determining and ultimately identifying the ideal trading partners. This paper introduces a multi-attribute decision-making methodology which is then used to select the optimal trading partner. In the method, an evaluation criteria system is established to assess the seven top trading partners based on three dimensions: political relationships, economic benefits and industrial security. Specifically, a simple additive weighing model derived from an additive utility function is utilized to calculate, rank and select alternatives. Results show that Japan would be the optimal trading partner for Chinese rare earths. The criteria evaluation method of trading partners for China's rare earth exports provides the Chinese government with a tool to enhance rare earth industrial policies.

Augmenting the Deliberative Method for Ranking Risks.

PubMed

Susel, Irving; Lasley, Trace; Montezemolo, Mark; Piper, Joel

2016-01-01

The Department of Homeland Security (DHS) characterized and prioritized the physical cross-border threats and hazards to the nation stemming from terrorism, market-driven illicit flows of people and goods (illegal immigration, narcotics, funds, counterfeits, and weaponry), and other nonmarket concerns (movement of diseases, pests, and invasive species). These threats and hazards pose a wide diversity of consequences with very different combinations of magnitudes and likelihoods, making it very challenging to prioritize them. This article presents the approach that was used at DHS to arrive at a consensus regarding the threats and hazards that stand out from the rest based on the overall risk they pose. Due to time constraints for the decision analysis, it was not feasible to apply multiattribute methodologies like multiattribute utility theory or the analytic hierarchy process. Using a holistic approach was considered, such as the deliberative method for ranking risks first published in this journal. However, an ordinal ranking alone does not indicate relative or absolute magnitude differences among the risks. Therefore, the use of the deliberative method for ranking risks is not sufficient for deciding whether there is a material difference between the top-ranked and bottom-ranked risks, let alone deciding what the stand-out risks are. To address this limitation of ordinal rankings, the deliberative method for ranking risks was augmented by adding an additional step to transform the ordinal ranking into a ratio scale ranking. This additional step enabled the selection of stand-out risks to help prioritize further analysis. © 2015 Society for Risk Analysis.

Decompositions of Multiattribute Utility Functions Based on Convex Dependence.

DTIC Science & Technology

1982-03-01

School of Business, 200E, BEB Decision Research University of Texas at Austin 1201 Oak Street Austin, Texas 78712 Eugene, Oregon 97401 Professor Norman ...Stephen M. Robinson Dept. of Industrial Engineering Dr. Richard D. Smallwood Univ. of Wisconsin, Madison Applied Decision Analysis, Inc. 1513 University

Analysis of Generation Y Workforce Motivation Using Multiattribute Utility Theory

DTIC Science & Technology

2011-01-01

careers and professional development (Westerman and Yamamura, 2007; Kim et al., 2009; Zemke et al., 2000). Generation Y aspires for a work / life balance (Crumpacker...within the federal govern- ment. The majority of Generation Y research is done on the work / life balance factor. Research points to this new

Spaceborne power systems preference analyses. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Smith, J. H.; Feinberg, A.; Miles, R. F., Jr.

1985-01-01

Sixteen alternative spaceborne nuclear power system concepts were ranked using multiattribute decision analysis to identify promising concepts for further technology development. Four groups interviewed were: safety, systems definition and design, technology assessment, and mission analysis. The ranking results were consistent from group and for different utility function models for individuals.

Goal Expectations as Predictors of Retirement Intentions

ERIC Educational Resources Information Center

Brougham, Ruby R.; Walsh, David A.

2005-01-01

The current study explored the contribution of personal goals to retirement decisions. A SMARTER methodology (to assess multiattribute utility) and taxonomy of human goals were used to investigate the relationship between older workers' personal goals and their retirement intentions. Two hundred and fifty-one employees of a large university,…

An evaluation of multiple trauma severity indices created by different index development strategies.

PubMed

Gustafson, D H; Fryback, D G; Rose, J H; Prokop, C T; Detmer, D E; Rossmeissl, J C; Taylor, C M; Alemi, F; Carnazzo, A J

1983-07-01

Evaluation of the effectiveness of emergency trauma care systems is complicated by the need to adjust for the widely variable case mix found in trauma patient populations. Several strategies have been advanced to construct the severity indices that can control for these population differences. This article describes a validity and reliability comparison of trauma severity indices developed under three different approaches: 1) use of a multi-attribute utility (MAU) model; 2) an actuarial approach relying on empirical data bases; and 3) an "ad hoc" approach. Seven criteria were identified to serve as standards of comparison for four different indices. The study's findings indicate that the index developed using the MAU theory approach associates most closely with physician judgments of trauma severity. When correlated with a morbidity outcome measure, the MAU-based index shows higher levels of agreement than the other indices. The index development approach based on the principles of MAU theory has several advantages and it appears to be a powerful tool in the creation of effective severity indices.

Decision Support for Personalized Cloud Service Selection through Multi-Attribute Trustworthiness Evaluation

PubMed Central

Ding, Shuai; Xia, Chen-Yi; Zhou, Kai-Le; Yang, Shan-Lin; Shang, Jennifer S.

2014-01-01

Facing a customer market with rising demands for cloud service dependability and security, trustworthiness evaluation techniques are becoming essential to cloud service selection. But these methods are out of the reach to most customers as they require considerable expertise. Additionally, since the cloud service evaluation is often a costly and time-consuming process, it is not practical to measure trustworthy attributes of all candidates for each customer. Many existing models cannot easily deal with cloud services which have very few historical records. In this paper, we propose a novel service selection approach in which the missing value prediction and the multi-attribute trustworthiness evaluation are commonly taken into account. By simply collecting limited historical records, the current approach is able to support the personalized trustworthy service selection. The experimental results also show that our approach performs much better than other competing ones with respect to the customer preference and expectation in trustworthiness assessment. PMID:24972237

Decision support for personalized cloud service selection through multi-attribute trustworthiness evaluation.

PubMed

Ding, Shuai; Xia, Cheng-Yi; Xia, Chen-Yi; Zhou, Kai-Le; Yang, Shan-Lin; Shang, Jennifer S

2014-01-01

Facing a customer market with rising demands for cloud service dependability and security, trustworthiness evaluation techniques are becoming essential to cloud service selection. But these methods are out of the reach to most customers as they require considerable expertise. Additionally, since the cloud service evaluation is often a costly and time-consuming process, it is not practical to measure trustworthy attributes of all candidates for each customer. Many existing models cannot easily deal with cloud services which have very few historical records. In this paper, we propose a novel service selection approach in which the missing value prediction and the multi-attribute trustworthiness evaluation are commonly taken into account. By simply collecting limited historical records, the current approach is able to support the personalized trustworthy service selection. The experimental results also show that our approach performs much better than other competing ones with respect to the customer preference and expectation in trustworthiness assessment.

Rank Weighting in Multiattribute Utility Decision Making: Avoiding the Pitfalls of Equal Weights.

DTIC Science & Technology

1979-09-01

set change are discussed in relation to the conditions of Wainer’s (Wainer, 1976) ’ equal weights theorem’ and the resulting sensitivity to weighting of...as equal weights. Rank weighting of importance dimensions demonstrate marked improvement of approximation as reflected in both Pearson and rank order

Decision Making for Pap Testing among Pacific Islander Women

ERIC Educational Resources Information Center

Weiss, Jie W.; Mouttapa, Michele; Sablan-Santos, Lola; DeGuzman Lacsamana, Jasmine; Quitugua, Lourdes; Park Tanjasiri, Sora

2016-01-01

This study employed a Multi-Attribute Utility (MAU) model to examine the Pap test decision-making process among Pacific Islanders (PI) residing in Southern California. A total of 585 PI women were recruited through social networks from Samoan and Tongan churches, and Chamorro family clans. A questionnaire assessed Pap test knowledge, beliefs and…

An Index of Trauma Severity Based on Multiattribute Utility: An Illustration of Complex Utility Modeling.

DTIC Science & Technology

1981-10-01

measure for Central Nervus System is the Glasgow Cons Score (GCS), a scale of brain and spinal cord injury (Langfitt [1978]), and is itself an additive...concerns directly relating to the injury itself were identified. These were: 1. Ventilation Severity 2 Circulation Severity 3. Central Nervous System ...interacting system within which these concerns represent interacting parts. Most trauma involves only one of these systems , but more than one may be

National Drug Formulary review of statin therapeutic group using the multiattribute scoring tool

PubMed Central

Ramli, Azuana; Aljunid, Syed Mohamed; Sulong, Saperi; Md Yusof, Faridah Aryani

2013-01-01

Purpose HMG-CoA reductase inhibitors (statins) are extensively used in treating hypercholesterolemia. The statins available in Malaysia include atorvastatin, lovastatin, pravastatin, rosuvastatin, simvastatin, and fluvastatin. Over the years, they have accumulated in the National Drug Formulary; hence, the need for review. Effective selection of the best drugs to remain in the formulary can become complex due to the multiple drug attributes involved, and is made worse by the limited time and resources available. The multiattribute scoring tool (MAST) systematizes the evaluation of the drug attributes to facilitate the drug selection process. In this study, a MAST framework was developed to rank the statins based on their utilities or benefits. Methods Published literature on multicriteria decision analysis (MCDA) were studied and five sessions of expert group discussions were conducted to build the MAST framework and to review the evidence. The attributes identified and selected for analysis were efficacy (clinical efficacy, clinical endpoints), safety (drug interactions, serious side effects and documentation), drug applicability (drug strength/formulation, indications, dose frequency, side effects, food–drug interactions, and dose adjustments), and cost. The average weights assigned by the members for efficacy, safety, drug applicability and cost were 32.6%, 26.2%, 24.1%, and 17.1%, respectively. The utility values of the attributes were scored based on the published evidence or/and agreements during the group discussions. The attribute scores were added up to provide the total utility score. Results Using the MAST, the six statins under review were successfully scored and ranked. Atorvastatin scored the highest total utility score (TUS) of 84.48, followed by simvastatin (83.11). Atorvastatin and simvastatin scored consistently high, even before drug costs were included. The low scores on the side effects for atorvastatin were compensated for by the higher scores on the clinical endpoints resulting in a higher TUS for atorvastatin. Fluvastatin recorded the lowest TUS. Conclusion The multiattribute scoring tool was successfully applied to organize decision variables in reviewing statins for the formulary. Based on the TUS, atorvastatin is recommended to remain in the formulary and be considered as first-line in the treatment of hypercholesterolemia. PMID:24353428

Public Affairs Decision Making in the U.S. Air Force: An Application of Multiattribute Utility Theory.

ERIC Educational Resources Information Center

David, Prabu; Pierson, Michael M.

1998-01-01

Contributes to scholarship on public relations decision making and public relations theory. Examines decision making by United States Air Force public affairs personnel. Finds that only 48% of the decisions fit the public relations excellence criteria of accommodation and long-term relationship building. Finds also a negative correlation between…

Zoning of an agricultural field using a fuzzy indicator model in combination with tool for multi-attributed decision-making

USDA-ARS?s Scientific Manuscript database

Zoning of agricultural fields is an important task for utilization of precision farming technology. This paper extends previously published work entitled “Zoning of an agricultural field using a fuzzy indicator model” to a general case where there is disagreement between groups of managers or expert...

Using Multiattribute Utility Copulas in Support of UAV Search and Destroy Operations

DTIC Science & Technology

2012-03-01

1, ..., n. (2.3) where ai = a(1 − li) and bi = 1 − ai = ali + b. This implies the same mathe- matical properties of a strictly increasing cumulative...and DTMC defined target movement. Abdelhafiz et al. [6] present several instances of the multi-objective UAV mis- sion planning problem where the

Intelligent data management for real-time spacecraft monitoring

NASA Technical Reports Server (NTRS)

Schwuttke, Ursula M.; Gasser, Les; Abramson, Bruce

1992-01-01

Real-time AI systems have begun to address the challenge of restructuring problem solving to meet real-time constraints by making key trade-offs that pursue less than optimal strategies with minimal impact on system goals. Several approaches for adapting to dynamic changes in system operating conditions are known. However, simultaneously adapting system decision criteria in a principled way has been difficult. Towards this end, a general technique for dynamically making such trade-offs using a combination of decision theory and domain knowledge has been developed. Multi-attribute utility theory (MAUT), a decision theoretic approach for making one-time decisions is discussed and dynamic trade-off evaluation is described as a knowledge-based extension of MAUT that is suitable for highly dynamic real-time environments, and provides an example of dynamic trade-off evaluation applied to a specific data management trade-off in a real-world spacecraft monitoring application.

Analysis of student attitudes towards e-learning using Fishbein Multiattribute approach

NASA Astrophysics Data System (ADS)

Jasuli

2018-01-01

This research aimed to know students’ attitudes toward e-learning and to determine what attributes were considered to be dominant by students toward the use of e-learning. The research population was all postgraduate students in the 2016 academic year at Universitas Negeri Surabaya. The sampling technique is using nonprobability sampling and purposive sampling with the sample totaled 100 respondents. The research instrument is using questionnaire with semantic differential scale. The models used to analyze is multi-attribute Fishbein model. The findings indicated that student attitudes toward e-learning are positive and easy accessibility which is considered as the most important attribute by students toward the use of e-learning.

Some induced intuitionistic fuzzy aggregation operators applied to multi-attribute group decision making

NASA Astrophysics Data System (ADS)

Su, Zhi-xin; Xia, Guo-ping; Chen, Ming-yuan

2011-11-01

In this paper, we define various induced intuitionistic fuzzy aggregation operators, including induced intuitionistic fuzzy ordered weighted averaging (OWA) operator, induced intuitionistic fuzzy hybrid averaging (I-IFHA) operator, induced interval-valued intuitionistic fuzzy OWA operator, and induced interval-valued intuitionistic fuzzy hybrid averaging (I-IIFHA) operator. We also establish various properties of these operators. And then, an approach based on I-IFHA operator and intuitionistic fuzzy weighted averaging (WA) operator is developed to solve multi-attribute group decision-making (MAGDM) problems. In such problems, attribute weights and the decision makers' (DMs') weights are real numbers and attribute values provided by the DMs are intuitionistic fuzzy numbers (IFNs), and an approach based on I-IIFHA operator and interval-valued intuitionistic fuzzy WA operator is developed to solve MAGDM problems where the attribute values provided by the DMs are interval-valued IFNs. Furthermore, induced intuitionistic fuzzy hybrid geometric operator and induced interval-valued intuitionistic fuzzy hybrid geometric operator are proposed. Finally, a numerical example is presented to illustrate the developed approaches.

Integrating Cost as an Independent Variable Analysis with Evolutionary Acquisition - A Multiattribute Design Evaluation Approach

DTIC Science & Technology

2003-03-01

within the Automated Cost Estimating Integrated Tools ( ACEIT ) software suite (version 5.x). With this capability, one can set cost targets or time...not allow the user to vary more than one decision variable. This limitation of the ACEIT approach thus hinders a holistic view when attempting to

Multiattribute Decision Modeling Techniques: A Comparative Analysis

DTIC Science & Technology

1988-08-01

Analytic Hierarchy Process ( AHP ). It is structurally similar to SMART, but elicitation methods are different and there are several algorithms for...reconciliation of inconsistent judgments and for consistency checks that are not available in any of the utility procedures. The AHP has been applied...of commercially available software packages that implement the AHP algorithms. Elicitation Methods. The AHP builds heavily on value trees, which

Multiattribute evaluation in formulary decision making as applied to calcium-channel blockers.

PubMed

Schumacher, G E

1991-02-01

The use of multiattribute utility theory (MAUT) to make a formulary decision involving calcium-channel blockers (CCBs) is described. The MAUT method is a procedure for identifying, characterizing, and comparing the many variables that may affect a decision. Although applications in pharmacy have been infrequent, MAUT should be particularly appealing to formulary committees. The steps of the MAUT method are (1) determine the viewpoint of the decision makers, (2) identify the decision alternatives, (3) identify the attributes to be evaluated, (4) identify the factors to be used in evaluating the attributes, (5) establish a utility scale for scoring each factor, (6) transform the values for each factor to its utility scale, (7) determine weights for each attribute and factor, (8) calculate the total utility score for each decision alternative, (9) determine which decision alternative has the greatest total score, and (10) perform a sensitivity analysis. The viewpoint of a formulary committee in a health maintenance organization was simulated to develop a model for using the MAUT method to compare CCBs for single-agent therapy of chronic stable angina in ambulatory patients for one year. The attributes chosen were effectiveness, safety, patient acceptance, and cost and weighted 36%, 29%, 21%, and 14%, respectively, as contributions to the evaluation. The rank order of the decision alternatives was (1) generic verapamil, (2) brand-name verapamil, (3) diltiazem, (4) nicardipine, and (5) nifedipine. The MAUT method provides a standardized yet flexible format for comparing and selecting among formulary alternatives.

Evaluative methodology for prioritizing transportation energy conservation strategies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pang, L.M.G.

An analytical methodology was developed for the purpose of prioritizing a set of transportation energy conservation (TEC) strategies within an urban environment. Steps involved in applying the methodology consist of 1) defining the goals, objectives and constraints of the given urban community, 2) identifying potential TEC strategies, 3) assessing the impact of the strategies, 4) applying the TEC evaluation model, and 5) utilizing a selection process to determine the optimal set of strategies for implementation. This research provides an overview of 21 TEC strategies, a quick-response technique for estimating energy savings, a multiattribute utility theory approach for assessing subjective impacts,more » and a computer program for making the strategy evaluations, all of which assist in expediting the execution of the entire methodology procedure. The critical element of the methodology is the strategy evaluation model which incorporates a number of desirable concepts including 1) a comprehensive accounting of all relevant impacts, 2) the application of multiobjective decision-making techniques, 3) an approach to assure compatibilty among quantitative and qualitative impact measures, 4) the inclusion of the decision maker's preferences in the evaluation procedure, and 5) the cost-effectiveness concept. Application of the methodolgy to Salt Lake City, Utah demonstrated its utility, ease of use and favorability by decision makers.« less

Risk-based decision making for terrorism applications.

PubMed

Dillon, Robin L; Liebe, Robert M; Bestafka, Thomas

2009-03-01

This article describes the anti-terrorism risk-based decision aid (ARDA), a risk-based decision-making approach for prioritizing anti-terrorism measures. The ARDA model was developed as part of a larger effort to assess investments for protecting U.S. Navy assets at risk and determine whether the most effective anti-terrorism alternatives are being used to reduce the risk to the facilities and war-fighting assets. With ARDA and some support from subject matter experts, we examine thousands of scenarios composed of 15 attack modes against 160 facility types on two installations and hundreds of portfolios of 22 mitigation alternatives. ARDA uses multiattribute utility theory to solve some of the commonly identified challenges in security risk analysis. This article describes the process and documents lessons learned from applying the ARDA model for this application.

A MULTI-ATTRIBUTE APPROACH TO RISK PRIORITIZATION. (R827920)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

Application of Grey Relational Analysis to Decision-Making during Product Development

ERIC Educational Resources Information Center

Hsiao, Shih-Wen; Lin, Hsin-Hung; Ko, Ya-Chuan

2017-01-01

A multi-attribute decision-making (MADM) approach was proposed in this study as a prediction method that differs from the conventional production and design methods for a product. When a client has different dimensional requirements, this approach can quickly provide a company with design decisions for each product. The production factors of a…

A decision aid for intensity-modulated radiation-therapy plan selection in prostate cancer based on a prognostic Bayesian network and a Markov model.

PubMed

Smith, Wade P; Doctor, Jason; Meyer, Jürgen; Kalet, Ira J; Phillips, Mark H

2009-06-01

The prognosis of cancer patients treated with intensity-modulated radiation-therapy (IMRT) is inherently uncertain, depends on many decision variables, and requires that a physician balance competing objectives: maximum tumor control with minimal treatment complications. In order to better deal with the complex and multiple objective nature of the problem we have combined a prognostic probabilistic model with multi-attribute decision theory which incorporates patient preferences for outcomes. The response to IMRT for prostate cancer was modeled. A Bayesian network was used for prognosis for each treatment plan. Prognoses included predicting local tumor control, regional spread, distant metastases, and normal tissue complications resulting from treatment. A Markov model was constructed and used to calculate a quality-adjusted life-expectancy which aids in the multi-attribute decision process. Our method makes explicit the tradeoffs patients face between quality and quantity of life. This approach has advantages over current approaches because with our approach risks of health outcomes and patient preferences determine treatment decisions.

Does the choice of tariff matter?

PubMed Central

Zhao, Yue; Li, Shun-Ping; Liu, Liu; Zhang, Jiang-Lin; Chen, Gang

2017-01-01

Abstract There is an increasing trend globally to develop country-specific tariffs that can theoretically better reflect population's preferences on health states for preference-based health-related quality-of-life instruments, also known as multiattribute utility instruments. This study focused on the most recently developed 5-level version of EuroQol-5 Dimension (EQ-5D) questionnaire, 1 of the world's most well-known multiattribute utility instruments, and aimed to empirically explore the agreements and known-group validities of applying the country-specific tariff versus tariffs developed from other countries using a sample of psoriasis vulgaris patients in Mainland China. A convenience sampling framework was adopted to recruit patients diagnosed with psoriasis vulgaris from Xiangya Hospital, Central South University, China, between May 2014 and February 2015. The 5-level EuroQol-5 dimensions (EQ-5D-5L) utilities were scored by using the Chinese, Japanese, and UK tariffs. Health state utilities were compared using a range of nonparametric test. The intraclass correlation coefficients and Bland–Altman plots were used to examine the agreements among the 3 EQ-5D-5L scores. Health state utility decrements between known groups were investigated using both effect size and a regression analysis. In all, 350 patients (aged 16 years or older) were recruited. There were significant differences among the 3 national tariff sets. Overall, 3 tariffs showed excellent agreements (intraclass correlation coefficient >0.90); however, the wide limits of agreement from the Bland–Altman plots suggest that these tariffs cannot be used interchangeably. The EQ-5D-5L scores using the Chinese-specific tariff showed the best known-group validity than the other 2 tariffs in this Chinese patient sample. The evidence from this study supports the choice of the country-specific tariff to be used in Mainland China. PMID:28834893

Evaluate the use of tanning agent in leather industry using material flow analysis, life cycle assessment and fuzzy multi-attribute decision making (FMADM)

NASA Astrophysics Data System (ADS)

Alfarisi, Salman; Sutono, Sugoro Bhakti; Sutopo, Wahyudi

2017-11-01

Tanning industry is one of the companies that produce many pollutants and cause the negative impact on the environment. In the production process of tanning leather, the use of input material need to be evaluated. The problem of waste, not only have a negative impact on the environment, but also human health. In this study, the impact of mimosa as vegetable tanning agent evaluated. This study will provide alternative solutions for improvements to the use of vegetable tanning agent. The alternative solution is change mimosa with indusol, gambier, and dulcotan. This study evaluate the vegetable tanning of some aspects using material flow analysis and life cycle assessment approach. Life cycle assessment (LCA) is used to evaluate the environmental impact of vegetable tanning agent. Alternative solution selection using fuzzy multi-attribute decision making (FMADM) approach. Results obtained by considering the environment, human toxicity, climate change, and marine aquatic ecotoxicity, is to use dulcotan.

An Interactive Computer Program for Assessing and Using Multiattribute Utility Functions

DTIC Science & Technology

1975-06-01

involved evaluating five options for dealing with the question of legalizing prostitution in the Boston area. These options were strict prohibition...MUFCAP Has 69 Been Applied 5.4.1 Evaluating Health Plans 69 5.4.2 Evaluating Policies for Dealing with 69 Prostitution in the Boston...toleration or benign neglect, regula- tion of prostitution , licensing of individual prostitutes and decriminalization. The attributes ware chosen to

Multi-Attribute Tradespace Exploration in Space System Design

NASA Astrophysics Data System (ADS)

Ross, A. M.; Hastings, D. E.

2002-01-01

The complexity inherent in space systems necessarily requires intense expenditures of resources both human and monetary. The high level of ambiguity present in the early design phases of these systems causes long, highly iterative, and costly design cycles. This paper looks at incorporating decision theory methods into the early design processes to streamline communication of wants and needs among stakeholders and between levels of design. Communication channeled through formal utility interviews and analysis enables engineers to better understand the key drivers for the system and allows a more thorough exploration of the design tradespace. Multi-Attribute Tradespace Exploration (MATE), an evolving process incorporating decision theory into model and simulation- based design, has been applied to several space system case studies at MIT. Preliminary results indicate that this process can improve the quality of communication to more quickly resolve project ambiguity, and enable the engineer to discover better value designs for multiple stakeholders. MATE is also being integrated into a concurrent design environment to facilitate the transfer knowledge of important drivers into higher fidelity design phases. Formal utility theory provides a mechanism to bridge the language barrier between experts of different backgrounds and differing needs (e.g. scientists, engineers, managers, etc). MATE with concurrent design couples decision makers more closely to the design, and most importantly, maintains their presence between formal reviews.

Embedding Human Expert Cognition Into Autonomous UAS Trajectory Planning.

PubMed

Narayan, Pritesh; Meyer, Patrick; Campbell, Duncan

2013-04-01

This paper presents a new approach for the inclusion of human expert cognition into autonomous trajectory planning for unmanned aerial systems (UASs) operating in low-altitude environments. During typical UAS operations, multiple objectives may exist; therefore, the use of multicriteria decision aid techniques can potentially allow for convergence to trajectory solutions which better reflect overall mission requirements. In that context, additive multiattribute value theory has been applied to optimize trajectories with respect to multiple objectives. A graphical user interface was developed to allow for knowledge capture from a human decision maker (HDM) through simulated decision scenarios. The expert decision data gathered are converted into value functions and corresponding criteria weightings using utility additive theory. The inclusion of preferences elicited from HDM data within an automated decision system allows for the generation of trajectories which more closely represent the candidate HDM decision preferences. This approach has been demonstrated in this paper through simulation using a fixed-wing UAS operating in low-altitude environments.

Evaluation of infectious diseases and clinical microbiology specialists' preferences for hand hygiene: analysis using the multi-attribute utility theory and the analytic hierarchy process methods.

PubMed

Suner, Aslı; Oruc, Ozlem Ege; Buke, Cagri; Ozkaya, Hacer Deniz; Kitapcioglu, Gul

2017-08-31

Hand hygiene is one of the most effective attempts to control nosocomial infections, and it is an important measure to avoid the transmission of pathogens. However, the compliance of healthcare workers (HCWs) with hand washing is still poor worldwide. Herein, we aimed to determine the best hand hygiene preference of the infectious diseases and clinical microbiology (IDCM) specialists to prevent transmission of microorganisms from one patient to another. Expert opinions regarding the criteria that influence the best hand hygiene preference were collected through a questionnaire via face-to-face interviews. Afterwards, these opinions were examined with two widely used multi-criteria decision analysis (MCDA) methods, the Multi-Attribute Utility Theory (MAUT) and the Analytic Hierarchy Process (AHP). A total of 15 IDCM specialist opinions were collected from diverse private and public hospitals located in İzmir, Turkey. The mean age of the participants was 49.73 ± 8.46, and the mean experience year of the participants in their fields was 17.67 ± 11.98. The findings that we obtained through two distinct decision making methods, the MAUT and the AHP, suggest that alcohol-based antiseptic solution (ABAS) has the highest utility (0.86) and priority (0.69) among the experts' choices. In conclusion, the MAUT and the AHP, decision models developed here indicate that rubbing the hands with ABAS is the most favorable choice for IDCM specialists to prevent nosocomial infection.

An Australian discrete choice experiment to value eq-5d health states.

PubMed

Viney, Rosalie; Norman, Richard; Brazier, John; Cronin, Paula; King, Madeleine T; Ratcliffe, Julie; Street, Deborah

2014-06-01

Conventionally, generic quality-of-life health states, defined within multi-attribute utility instruments, have been valued using a Standard Gamble or a Time Trade-Off. Both are grounded in expected utility theory but impose strong assumptions about the form of the utility function. Preference elicitation tasks for both are complicated, limiting the number of health states that each respondent can value and, therefore, that can be valued overall. The usual approach has been to value a set of the possible health states and impute values for the remainder. Discrete Choice Experiments (DCEs) offer an attractive alternative, allowing investigation of more flexible specifications of the utility function and greater coverage of the response surface. We designed a DCE to obtain values for EQ-5D health states and implemented it in an Australia-representative online panel (n = 1,031). A range of specifications investigating non-linear preferences with respect to time and interactions between EQ-5D levels were estimated using a random-effects probit model. The results provide empirical support for a flexible utility function, including at least some two-factor interactions. We then constructed a preference index such that full health and death were valued at 1 and 0, respectively, to provide a DCE-based algorithm for Australian cost-utility analyses. Copyright © 2013 John Wiley & Sons, Ltd.

The Valuation of Scientific and Technical Experiments

NASA Technical Reports Server (NTRS)

Williams, F. E.

1972-01-01

Rational selection of scientific and technical experiments for space missions is studied. Particular emphasis is placed on the assessment of value or worth of an experiment. A specification procedure is outlined and discussed for the case of one decision maker. Experiments are viewed as multi-attributed entities, and a relevant set of attributes is proposed. Alternative methods of describing levels of the attributes are proposed and discussed. The reasonableness of certain simplifying assumptions such as preferential and utility independence is explored, and it is tentatively concluded that preferential independence applies and utility independence appears to be appropriate.

A Structured Decision Approach for Integrating and Analyzing Community Perspectives in Re-Use Planning of Vacant Properties in Cleveland, Ohio

EPA Science Inventory

An integrated GIS-based, multi-attribute decision model deployed in a web-based platform is presented enabling an iterative, spatially explicit and collaborative analysis of relevant and available information for repurposing vacant land. The process incorporated traditional and ...

Averaging Models: Parameters Estimation with the R-Average Procedure

ERIC Educational Resources Information Center

Vidotto, G.; Massidda, D.; Noventa, S.

2010-01-01

The Functional Measurement approach, proposed within the theoretical framework of Information Integration Theory (Anderson, 1981, 1982), can be a useful multi-attribute analysis tool. Compared to the majority of statistical models, the averaging model can account for interaction effects without adding complexity. The R-Average method (Vidotto &…

Structuring Process Evaluation to Forecast Use and Sustainability of an Intervention: Theory and Data From the Efficacy Trial for Lunch Is in the Bag.

PubMed

Roberts-Gray, Cindy; Sweitzer, Sara J; Ranjit, Nalini; Potratz, Christa; Rood, Magdalena; Romo-Palafox, Maria Jose; Byrd-Williams, Courtney E; Briley, Margaret E; Hoelscher, Deanna M

2017-08-01

A cluster-randomized trial at 30 early care and education centers (Intervention = 15, waitlist Control = 15) showed the Lunch Is in the Bag intervention increased parents' packing of fruits, vegetables, and whole grains in their preschool children's bag lunches (parent-child dyads = 351 Intervention, 282 Control). To examine the utility of structuring the trial's process evaluation to forecast use, sustainability, and readiness of the intervention for wider dissemination and implementation. Pretrial, the research team simulated user experience to forecast use of the intervention. Multiattribute evaluation of user experience measured during the trial assessed use and sustainability of the intervention. Thematic analysis of posttrial interviews with users evaluated sustained use and readiness for wider dissemination. Moderate use was forecast by the research team. Multiattribute evaluation of activity logs, surveys, and observations during the trial indicated use consistent with the forecast except that prevalence of parents reading the newsletters was greater (83% vs. 50%) and hearing their children talk about the classroom was less (4% vs. 50%) than forecast. Early care and education center-level likelihood of sustained use was projected to be near zero. Posttrial interviews indicated use was sustained at zero centers. Structuring the efficacy trial's process evaluation as a progression of assessments of user experience produced generally accurate forecasts of use and sustainability of the intervention at the trial sites. This approach can assist interpretation of trial outcomes, aid decisions about dissemination of the intervention, and contribute to translational science for improving health.

Decision analysis for a data collection system of patient-controlled analgesia with a multi-attribute utility model.

PubMed

Lee, I-Jung; Huang, Shih-Yu; Tsou, Mei-Yung; Chan, Kwok-Hon; Chang, Kuang-Yi

2010-10-01

Data collection systems are very important for the practice of patient-controlled analgesia (PCA). This study aimed to evaluate 3 PCA data collection systems and selected the most favorable system with the aid of multiattribute utility (MAU) theory. We developed a questionnaire with 10 items to evaluate the PCA data collection system and 1 item for overall satisfaction based on MAU theory. Three systems were compared in the questionnaire, including a paper record, optic card reader and personal digital assistant (PDA). A pilot study demonstrated a good internal and test-retest reliability of the questionnaire. A weighted utility score combining the relative importance of individual items assigned by each participant and their responses to each question was calculated for each system. Sensitivity analyses with distinct weighting protocols were conducted to evaluate the stability of the final results. Thirty potential users of a PCA data collection system were recruited in the study. The item "easy to use" had the highest median rank and received the heaviest mean weight among all items. MAU analysis showed that the PDA system had a higher utility score than that in the other 2 systems. Sensitivity analyses revealed that both inverse and reciprocal weighting processes favored the PDA system. High correlations between overall satisfaction and MAU scores from miscellaneous weighting protocols suggested a good predictive validity of our MAU-based questionnaire. The PDA system was selected as the most favorable PCA data collection system by the MAU analysis. The item "easy to use" was the most important attribute of the PCA data collection system. MAU theory can evaluate alternatives by taking into account individual preferences of stakeholders and aid in better decision-making. Copyright © 2010 Elsevier. Published by Elsevier B.V. All rights reserved.

The Local Geometry of Multiattribute Tradeoff Preferences

PubMed Central

McGeachie, Michael; Doyle, Jon

2011-01-01

Existing representations for multiattribute ceteris paribus preference statements have provided useful treatments and clear semantics for qualitative comparisons, but have not provided similarly clear representations or semantics for comparisons involving quantitative tradeoffs. We use directional derivatives and other concepts from elementary differential geometry to interpret conditional multiattribute ceteris paribus preference comparisons that state bounds on quantitative tradeoff ratios. This semantics extends the familiar economic notion of marginal rate of substitution to multiple continuous or discrete attributes. The same geometric concepts also provide means for interpreting statements about the relative importance of different attributes. PMID:21528018

Does the choice of tariff matter?: A comparison of EQ-5D-5L utility scores using Chinese, UK, and Japanese tariffs on patients with psoriasis vulgaris in Central South China.

PubMed

Zhao, Yue; Li, Shun-Ping; Liu, Liu; Zhang, Jiang-Lin; Chen, Gang

2017-08-01

There is an increasing trend globally to develop country-specific tariffs that can theoretically better reflect population's preferences on health states for preference-based health-related quality-of-life instruments, also known as multiattribute utility instruments. This study focused on the most recently developed 5-level version of EuroQol-5 Dimension (EQ-5D) questionnaire, 1 of the world's most well-known multiattribute utility instruments, and aimed to empirically explore the agreements and known-group validities of applying the country-specific tariff versus tariffs developed from other countries using a sample of psoriasis vulgaris patients in Mainland China.A convenience sampling framework was adopted to recruit patients diagnosed with psoriasis vulgaris from Xiangya Hospital, Central South University, China, between May 2014 and February 2015. The 5-level EuroQol-5 dimensions (EQ-5D-5L) utilities were scored by using the Chinese, Japanese, and UK tariffs. Health state utilities were compared using a range of nonparametric test. The intraclass correlation coefficients and Bland-Altman plots were used to examine the agreements among the 3 EQ-5D-5L scores. Health state utility decrements between known groups were investigated using both effect size and a regression analysis.In all, 350 patients (aged 16 years or older) were recruited. There were significant differences among the 3 national tariff sets. Overall, 3 tariffs showed excellent agreements (intraclass correlation coefficient >0.90); however, the wide limits of agreement from the Bland-Altman plots suggest that these tariffs cannot be used interchangeably. The EQ-5D-5L scores using the Chinese-specific tariff showed the best known-group validity than the other 2 tariffs in this Chinese patient sample. The evidence from this study supports the choice of the country-specific tariff to be used in Mainland China.

Pros and cons of conjoint analysis of discrete choice experiments to define classification and response criteria in rheumatology.

PubMed

Taylor, William J

2016-03-01

Conjoint analysis of choice or preference data has been used in marketing for over 40 years but has appeared in healthcare settings much more recently. It may be a useful technique for applications within the rheumatology field. Conjoint analysis in rheumatology contexts has mainly used the approaches implemented in 1000Minds Ltd, Dunedin, New Zealand, Sawtooth Software, Orem UT, USA. Examples include classification criteria, composite response criteria, service prioritization tools and utilities assessment. Limitations imposed by very many attributes can be managed using new techniques. Conjoint analysis studies of classification and response criteria suggest that the assumption of equal weighting of attributes cannot be met, which challenges traditional approaches to composite criteria construction. Weights elicited through choice experiments with experts can derive more accurate classification criteria, than unweighted criteria. Studies that find significant variation in attribute weights for composite response criteria for gout make construction of such criteria problematic. Better understanding of various multiattribute phenomena is likely to increase with increased use of conjoint analysis, especially when the attributes concern individual perceptions or opinions. In addition to classification criteria, some applications for conjoint analysis that are emerging in rheumatology include prioritization tools, remission criteria, and utilities for life areas.

A Multiattributes Approach for Ranking PhD Programs

ERIC Educational Resources Information Center

Urbancic, Frank R.

2008-01-01

In its plan to combat the PhD shortage crisis, the Association to Advance Collegiate Schools of Business International (AACSB; 2003) has called for the development of PhD program rankings to serve as incentives for academic institutions to invest more in PhD programs, thereby counterbalancing the disproportionate influence of master of business…

A Market-oriented Approach To Maximizing Product Benefits: Cases in U.S. Forest Products Industries

Treesearch

Vijay S. Reddy; Robert J. Bush; Ronen Roudik

1996-01-01

Conjoint analysis, a decompositional customer preference modelling technique, has seen little application to forest products. However, the technique provides useful information for marketing decisions by quantifying consumer preference functions for multiattribute product alternatives. The results of a conjoint analysis include the contribution of each attribute and...

A new multicriteria risk mapping approach based on a multiattribute frontier concept

Treesearch

Denys Yemshanov; Frank H. Koch; Yakov Ben-Haim; Marla Downing; Frank Sapio; Marty Siltanen

2013-01-01

Invasive species risk maps provide broad guidance on where to allocate resources for pest monitoring and regulation, but they often present individual risk components (such as climatic suitability, host abundance, or introduction potential) as independent entities. These independent risk components are integrated using various multicriteria analysis techniques that...

Choice and explanation in medical management: a multiattribute model of artificial intelligence approaches.

PubMed

Rennels, G D; Shortliffe, E H; Miller, P L

1987-01-01

This paper explores a model of choice and explanation in medical management and makes clear its advantages and limitations. The model is based on multiattribute decision making (MADM) and consists of four distinct strategies for choice and explanation, plus combinations of these four. Each strategy is a restricted form of the general MADM approach, and each makes restrictive assumptions about the nature of the domain. The advantage of tailoring a restricted form of a general technique to a particular domain is that such efforts may better capture the character of the domain and allow choice and explanation to be more naturally modelled. The uses of the strategies for both choice and explanation are illustrated with analyses of several existing medical management artificial intelligence (AI) systems, and also with examples from the management of primary breast cancer. Using the model it is possible to identify common underlying features of these AI systems, since each employs portions of this model in different ways. Thus the model enables better understanding and characterization of the seemingly ad hoc decision making of previous systems.

Multi-attribute Regret-Based Dynamic Pricing

NASA Astrophysics Data System (ADS)

Jumadinova, Janyl; Dasgupta, Prithviraj

In this paper, we consider the problem of dynamic pricing by a set of competing sellers in an information economy where buyers differentiate products along multiple attributes, and buyer preferences can change temporally. Previous research in this area has either focused on dynamic pricing along a limited number of (e.g. binary) attributes, or, assumes that each seller has access to private information such as preference distribution of buyers, and profit/price information of other sellers. However, in real information markets, private information about buyers and sellers cannot be assumed to be available a priori. Moreover, due to the competition between sellers, each seller faces a tradeoff between accuracy and rapidity of the pricing mechanism. In this paper, we describe a multi-attribute dynamic pricing algorithm based on minimax regret that can be used by a seller's agent called a pricebot, to maximize the seller's utility. Our simulation results show that the minimax regret based dynamic pricing algorithm performs significantly better than other algorithms for rapidly and dynamically tracking consumer attributes without using any private information from either buyers or sellers.

Fuzzy sets, rough sets, and modeling evidence: Theory and Application. A Dempster-Shafer based approach to compromise decision making with multiattributes applied to product selection

NASA Technical Reports Server (NTRS)

Dekorvin, Andre

1992-01-01

The Dempster-Shafer theory of evidence is applied to a multiattribute decision making problem whereby the decision maker (DM) must compromise with available alternatives, none of which exactly satisfies his ideal. The decision mechanism is constrained by the uncertainty inherent in the determination of the relative importance of each attribute element and the classification of existing alternatives. The classification of alternatives is addressed through expert evaluation of the degree to which each element is contained in each available alternative. The relative importance of each attribute element is determined through pairwise comparisons of the elements by the decision maker and implementation of a ratio scale quantification method. Then the 'belief' and 'plausibility' that an alternative will satisfy the decision maker's ideal are calculated and combined to rank order the available alternatives. Application to the problem of selecting computer software is given.

Selection of an Optimum Air Defense Weapon Package Using MAUM (Multi-Attribute Utility Measurement).

DTIC Science & Technology

1983-06-01

SELECTION OF AN OPTIMUM AIR DEFENSE WEAPON PACKAGE USING MAUM by Wilton L. Ham June 1983 Thesis Advisor: R. G. Nickerson Approved for public release...OSSTRIUTON STATEMEN4T (of if AlRpeat) Approved for public release; distribution unlimited. I?. 01STVAGUTgOg STATE[MENT (of me ubeh’ei antered Ian...hold": do not fire except in self defense. 4. Firing Commands. These are commands issued regard- less of the weapons control in effect. There are three

A Response-Time Approach to Comparing Generalized Rational and Take-the-Best Models of Decision Making

ERIC Educational Resources Information Center

Bergert, F. Bryan; Nosofsky, Robert M.

2007-01-01

The authors develop and test generalized versions of take-the-best (TTB) and rational (RAT) models of multiattribute paired-comparison inference. The generalized models make allowances for subjective attribute weighting, probabilistic orders of attribute inspection, and noisy decision making. A key new test involves a response-time (RT)…

Postoptimality analysis in the selection of technology portfolios

NASA Technical Reports Server (NTRS)

Adumitroaie, Virgil; Shelton, Kacie; Elfes, Alberto; Weisbin, Charles R.

2006-01-01

This paper describes an approach for qualifying optimal technology portfolios obtained with a multi-attribute decision support system. The goal is twofold: to gauge the degree of confidence in the optimal solution and to provide the decision-maker with an array of viable selection alternatives, which take into account input uncertainties and possibly satisfy non-technical constraints.

Development of a multi-criteria evaluation system to assess growing pig welfare.

PubMed

Martín, P; Traulsen, I; Buxadé, C; Krieter, J

2017-03-01

The aim of this paper was to present an alternative multi-criteria evaluation model to assess animal welfare on farms based on the Welfare Quality® (WQ) project, using an example of welfare assessment of growing pigs. The WQ assessment protocol follows a three-step aggregation process. Measures are aggregated into criteria, criteria into principles and principles into an overall assessment. This study focussed on the first step of the aggregation. Multi-attribute utility theory (MAUT) was used to produce a value of welfare for each criterion. The utility functions and the aggregation function were constructed in two separated steps. The Measuring Attractiveness by a Categorical Based Evaluation Technique (MACBETH) method was used for utility function determination and the Choquet Integral (CI) was used as an aggregation operator. The WQ decision-makers' preferences were fitted in order to construct the utility functions and to determine the CI parameters. The methods were tested with generated data sets for farms of growing pigs. Using the MAUT, similar results were obtained to the ones obtained applying the WQ protocol aggregation methods. It can be concluded that due to the use of an interactive approach such as MACBETH, this alternative methodology is more transparent and more flexible than the methodology proposed by WQ, which allows the possibility to modify the model according, for instance, to new scientific knowledge.

A cloud model based multi-attribute decision making approach for selection and evaluation of groundwater management schemes

NASA Astrophysics Data System (ADS)

Lu, Hongwei; Ren, Lixia; Chen, Yizhong; Tian, Peipei; Liu, Jia

2017-12-01

Due to the uncertainty (i.e., fuzziness, stochasticity and imprecision) existed simultaneously during the process for groundwater remediation, the accuracy of ranking results obtained by the traditional methods has been limited. This paper proposes a cloud model based multi-attribute decision making framework (CM-MADM) with Monte Carlo for the contaminated-groundwater remediation strategies selection. The cloud model is used to handle imprecise numerical quantities, which can describe the fuzziness and stochasticity of the information fully and precisely. In the proposed approach, the contaminated concentrations are aggregated via the backward cloud generator and the weights of attributes are calculated by employing the weight cloud module. A case study on the remedial alternative selection for a contaminated site suffering from a 1,1,1-trichloroethylene leakage problem in Shanghai, China is conducted to illustrate the efficiency and applicability of the developed approach. Totally, an attribute system which consists of ten attributes were used for evaluating each alternative through the developed method under uncertainty, including daily total pumping rate, total cost and cloud model based health risk. Results indicated that A14 was evaluated to be the most preferred alternative for the 5-year, A5 for the 10-year, A4 for the 15-year and A6 for the 20-year remediation.

Multi-Attribute Sequential Search

ERIC Educational Resources Information Center

Bearden, J. Neil; Connolly, Terry

2007-01-01

This article describes empirical and theoretical results from two multi-attribute sequential search tasks. In both tasks, the DM sequentially encounters options described by two attributes and must pay to learn the values of the attributes. In the "continuous" version of the task the DM learns the precise numerical value of an attribute when she…

"Fibromyalgia and quality of life: mapping the revised fibromyalgia impact questionnaire to the preference-based instruments".

PubMed

Collado-Mateo, Daniel; Chen, Gang; Garcia-Gordillo, Miguel A; Iezzi, Angelo; Adsuar, José C; Olivares, Pedro R; Gusi, Narcis

2017-05-30

The revised version of the Fibromyalgia Impact Questionnaire (FIQR) is one of the most widely used specific questionnaires in FM studies. However, this questionnaire does not allow calculation of QALYs as it is not a preference-based measure. The aim of this study was to develop mapping algorithm which enable FIQR scores to be transformed into utility scores that can be used in the cost utility analyses. A cross-sectional survey was conducted. One hundred and 92 Spanish women with Fibromyalgia were asked to complete four general quality of life questionnaires, i.e. EQ-5D-5 L, 15D, AQoL-8D and SF-12, and one specific disease instrument, the FIQR. A direct mapping approach was adopted to derive mapping algorithms between the FIQR and each of the four multi-attribute utility (MAU) instruments. Health state utility was treated as the dependent variable in the regression analysis, whilst the FIQR score and age were predictors. The mean utility scores ranged from 0.47 (AQoL-8D) to 0.69 (15D). All correlations between the FIQR total score and MAU instruments utility scores were highly significant (p < 0.0001) with magnitudes larger than 0.5. Although very slight differences in the mean absolute error were found between ordinary least squares (OLS) estimator and generalized linear model (GLM), models based on GLM were better for EQ-5D-5 L, AQoL-8D and 15D. Mapping algorithms developed in this study enable the estimation of utility values from scores in a fibromyalgia specific questionnaire.

Assessing Women's Preferences and Preference Modeling for Breast Reconstruction Decision-Making.

PubMed

Sun, Clement S; Cantor, Scott B; Reece, Gregory P; Crosby, Melissa A; Fingeret, Michelle C; Markey, Mia K

2014-03-01

Women considering breast reconstruction must make challenging trade-offs amongst issues that often conflict. It may be useful to quantify possible outcomes using a single summary measure to aid a breast cancer patient in choosing a form of breast reconstruction. In this study, we used multiattribute utility theory to combine multiple objectives to yield a summary value using nine different preference models. We elicited the preferences of 36 women, aged 32 or older with no history of breast cancer, for the patient-reported outcome measures of breast satisfaction, psychosocial well-being, chest well-being, abdominal well-being, and sexual wellbeing as measured by the BREAST-Q in addition to time lost to reconstruction and out-of-pocket cost. Participants ranked hypothetical breast reconstruction outcomes. We examined each multiattribute utility preference model and assessed how often each model agreed with participants' rankings. The median amount of time required to assess preferences was 34 minutes. Agreement among the nine preference models with the participants ranged from 75.9% to 78.9%. None of the preference models performed significantly worse than the best performing risk averse multiplicative model. We hypothesize an average theoretical agreement of 94.6% for this model if participant error is included. There was a statistically significant positive correlation with more unequal distribution of weight given to the seven attributes. We recommend the risk averse multiplicative model for modeling the preferences of patients considering different forms of breast reconstruction because it agreed most often with the participants in this study.

A pseudo-sequential choice model for valuing multi-attribute environmental policies or programs in contingent valuation applications

Treesearch

Dmitriy Volinskiy; John C Bergstrom; Christopher M Cornwell; Thomas P Holmes

2010-01-01

The assumption of independence of irrelevant alternatives in a sequential contingent valuation format should be questioned. Statistically, most valuation studies treat nonindependence as a consequence of unobserved individual effects. Another approach is to consider an inferential process in which any particular choice is part of a general choosing strategy of a survey...

Enhancing Collaborative Peer-to-Peer Systems Using Resource Aggregation and Caching: A Multi-Attribute Resource and Query Aware Approach

ERIC Educational Resources Information Center

Bandara, H. M. N. Dilum

2012-01-01

Resource-rich computing devices, decreasing communication costs, and Web 2.0 technologies are fundamentally changing the way distributed applications communicate and collaborate. With these changes, we envision Peer-to-Peer (P2P) systems that will allow for the integration and collaboration of peers with diverse capabilities to a virtual community…

Strategic Planning in Population Health and Public Health Practice: A Call to Action for Higher Education.

PubMed

Phelps, Charles; Madhavan, Guruprasad; Rappuoli, Rino; Levin, Scott; Shortliffe, Edward; Colwell, Rita

2016-03-01

Scarce resources, especially in population health and public health practice, underlie the importance of strategic planning. Public health agencies' current planning and priority setting efforts are often narrow, at times opaque, and focused on single metrics such as cost-effectiveness. As demonstrated by SMART Vaccines, a decision support software system developed by the Institute of Medicine and the National Academy of Engineering, new approaches to strategic planning allow the formal incorporation of multiple stakeholder views and multicriteria decision making that surpass even those sophisticated cost-effectiveness analyses widely recommended and used for public health planning. Institutions of higher education can and should respond by building on modern strategic planning tools as they teach their students how to improve population health and public health practice. Strategic planning in population health and public health practice often uses single indicators of success or, when using multiple indicators, provides no mechanism for coherently combining the assessments. Cost-effectiveness analysis, the most complex strategic planning tool commonly applied in public health, uses only a single metric to evaluate programmatic choices, even though other factors often influence actual decisions. Our work employed a multicriteria systems analysis approach--specifically, multiattribute utility theory--to assist in strategic planning and priority setting in a particular area of health care (vaccines), thereby moving beyond the traditional cost-effectiveness analysis approach. (1) Multicriteria systems analysis provides more flexibility, transparency, and clarity in decision support for public health issues compared with cost-effectiveness analysis. (2) More sophisticated systems-level analyses will become increasingly important to public health as disease burdens increase and the resources to deal with them become scarcer. The teaching of strategic planning in public health must be expanded in order to fill a void in the profession's planning capabilities. Public health training should actively incorporate model building, promote the interactive use of software tools, and explore planning approaches that transcend restrictive assumptions of cost-effectiveness analysis. The Strategic Multi-Attribute Ranking Tool for Vaccines (SMART Vaccines), which was recently developed by the Institute of Medicine and the National Academy of Engineering to help prioritize new vaccine development, is a working example of systems analysis as a basis for decision support. © 2016 Milbank Memorial Fund.

A View on the Importance of "Multi-Attribute Method" for Measuring Purity of Biopharmaceuticals and Improving Overall Control Strategy.

PubMed

Rogers, Richard S; Abernathy, Michael; Richardson, Douglas D; Rouse, Jason C; Sperry, Justin B; Swann, Patrick; Wypych, Jette; Yu, Christopher; Zang, Li; Deshpande, Rohini

2017-11-30

Today, we are experiencing unprecedented growth and innovation within the pharmaceutical industry. Established protein therapeutic modalities, such as recombinant human proteins, monoclonal antibodies (mAbs), and fusion proteins, are being used to treat previously unmet medical needs. Novel therapies such as bispecific T cell engagers (BiTEs), chimeric antigen T cell receptors (CARTs), siRNA, and gene therapies are paving the path towards increasingly personalized medicine. This advancement of new indications and therapeutic modalities is paralleled by development of new analytical technologies and methods that provide enhanced information content in a more efficient manner. Recently, a liquid chromatography-mass spectrometry (LC-MS) multi-attribute method (MAM) has been developed and designed for improved simultaneous detection, identification, quantitation, and quality control (monitoring) of molecular attributes (Rogers et al. MAbs 7(5):881-90, 2015). Based on peptide mapping principles, this powerful tool represents a true advancement in testing methodology that can be utilized not only during product characterization, formulation development, stability testing, and development of the manufacturing process, but also as a platform quality control method in dispositioning clinical materials for both innovative biotherapeutics and biosimilars.

Analysis of Subjective Judgment Matrices.

DTIC Science & Technology

1980-05-01

Matrices.i. Crawford, Gordon, 1936- joint author. 11. Title. Ill Series: Rad Coporation . Rand reports o R-2572-0. A036-.13 R-2572 (E*278.2) 081s (519.5�...scaling the worth of a set of objects or entities . For problems that fit the Saaty framework, this report details aa ImpEuveNeL ua Sd4Ly’b "CtSgeLVCLLuL...Analysis for Siting of Nuclear Plants: The Relevance of Multiattribute Utility Theory ," Technical Report No. 96, Operations Research Center, MIT, 1974. 8

Assessing land clearing potential in the Canadian agriculture–forestry interface with a multi-attribute frontier approach

Treesearch

Denys Yemshanov; Frank Koch; Kurt H. Riitters; Brian McConkey; Ted Huffmand; Stephen Smithe

2015-01-01

The pattern of forest land clearing in a region can be viewed as a gauge of sustainable (or unsustain-able) use of agricultural and forest resources. In this study we examine the geographical distribution ofland clearing potential in the Canadian agriculture–forestry interface and propose a new landscape-scaleindicator that quantifies this potential. We consider the...

Integrated seismic stochastic inversion and multi-attributes to delineate reservoir distribution: Case study MZ fields, Central Sumatra Basin

NASA Astrophysics Data System (ADS)

Haris, A.; Novriyani, M.; Suparno, S.; Hidayat, R.; Riyanto, A.

2017-07-01

This study presents the integration of seismic stochastic inversion and multi-attributes for delineating the reservoir distribution in term of lithology and porosity in the formation within depth interval between the Top Sihapas and Top Pematang. The method that has been used is a stochastic inversion, which is integrated with multi-attribute seismic by applying neural network Probabilistic Neural Network (PNN). Stochastic methods are used to predict the probability mapping sandstone as the result of impedance varied with 50 realizations that will produce a good probability. Analysis of Stochastic Seismic Tnversion provides more interpretive because it directly gives the value of the property. Our experiment shows that AT of stochastic inversion provides more diverse uncertainty so that the probability value will be close to the actual values. The produced AT is then used for an input of a multi-attribute analysis, which is used to predict the gamma ray, density and porosity logs. To obtain the number of attributes that are used, stepwise regression algorithm is applied. The results are attributes which are used in the process of PNN. This PNN method is chosen because it has the best correlation of others neural network method. Finally, we interpret the product of the multi-attribute analysis are in the form of pseudo-gamma ray volume, density volume and volume of pseudo-porosity to delineate the reservoir distribution. Our interpretation shows that the structural trap is identified in the southeastern part of study area, which is along the anticline.

Linguistic Multi-Attribute Group Decision Making with Risk Preferences and Its Use in Low-Carbon Tourism Destination Selection.

PubMed

Lin, Hui; Wang, Zhou-Jing

2017-09-17

Low-carbon tourism plays an important role in carbon emission reduction and environmental protection. Low-carbon tourism destination selection often involves multiple conflicting and incommensurate attributes or criteria and can be modelled as a multi-attribute decision-making problem. This paper develops a framework to solve multi-attribute group decision-making problems, where attribute evaluation values are provided as linguistic terms and the attribute weight information is incomplete. In order to obtain a group risk preference captured by a linguistic term set with triangular fuzzy semantic information, a nonlinear programming model is established on the basis of individual risk preferences. We first convert individual linguistic-term-based decision matrices to their respective triangular fuzzy decision matrices, which are then aggregated into a group triangular fuzzy decision matrix. Based on this group decision matrix and the incomplete attribute weight information, a linear program is developed to find an optimal attribute weight vector. A detailed procedure is devised for tackling linguistic multi-attribute group decision making problems. A low-carbon tourism destination selection case study is offered to illustrate how to use the developed group decision-making model in practice.

Linguistic Multi-Attribute Group Decision Making with Risk Preferences and Its Use in Low-Carbon Tourism Destination Selection

PubMed Central

Lin, Hui; Wang, Zhou-Jing

2017-01-01

Low-carbon tourism plays an important role in carbon emission reduction and environmental protection. Low-carbon tourism destination selection often involves multiple conflicting and incommensurate attributes or criteria and can be modelled as a multi-attribute decision-making problem. This paper develops a framework to solve multi-attribute group decision-making problems, where attribute evaluation values are provided as linguistic terms and the attribute weight information is incomplete. In order to obtain a group risk preference captured by a linguistic term set with triangular fuzzy semantic information, a nonlinear programming model is established on the basis of individual risk preferences. We first convert individual linguistic-term-based decision matrices to their respective triangular fuzzy decision matrices, which are then aggregated into a group triangular fuzzy decision matrix. Based on this group decision matrix and the incomplete attribute weight information, a linear program is developed to find an optimal attribute weight vector. A detailed procedure is devised for tackling linguistic multi-attribute group decision making problems. A low-carbon tourism destination selection case study is offered to illustrate how to use the developed group decision-making model in practice. PMID:28926985

Assessing Women’s Preferences and Preference Modeling for Breast Reconstruction Decision Making

PubMed Central

Sun, Clement S.; Cantor, Scott B.; Reece, Gregory P.; Crosby, Melissa A.; Fingeret, Michelle C.

2014-01-01

Background: Women considering breast reconstruction must make challenging trade-offs among issues that often conflict. It may be useful to quantify possible outcomes using a single summary measure to aid a breast cancer patient in choosing a form of breast reconstruction. Methods: In this study, we used multiattribute utility theory to combine multiple objectives to yield a summary value using 9 different preference models. We elicited the preferences of 36 women, aged 32 or older with no history of breast cancer, for the patient-reported outcome measures of breast satisfaction, psychosocial well-being, chest well-being, abdominal well-being, and sexual well-being as measured by the BREAST-Q in addition to time lost to reconstruction and out-of-pocket cost. Participants ranked hypothetical breast reconstruction outcomes. We examined each multiattribute utility preference model and assessed how often each model agreed with participants’ rankings. Results: The median amount of time required to assess preferences was 34 minutes. Agreement among the 9 preference models with the participants ranged from 75.9% to 78.9%. None of the preference models performed significantly worse than the best-performing risk-averse multiplicative model. We hypothesize an average theoretical agreement of 94.6% for this model if participant error is included. There was a statistically significant positive correlation with more unequal distribution of weight given to the 7 attributes. Conclusions: We recommend the risk-averse multiplicative model for modeling the preferences of patients considering different forms of breast reconstruction because it agreed most often with the participants in this study. PMID:25105083

An Integrated Approach of Fuzzy Linguistic Preference Based AHP and Fuzzy COPRAS for Machine Tool Evaluation.

PubMed

Nguyen, Huu-Tho; Md Dawal, Siti Zawiah; Nukman, Yusoff; Aoyama, Hideki; Case, Keith

2015-01-01

Globalization of business and competitiveness in manufacturing has forced companies to improve their manufacturing facilities to respond to market requirements. Machine tool evaluation involves an essential decision using imprecise and vague information, and plays a major role to improve the productivity and flexibility in manufacturing. The aim of this study is to present an integrated approach for decision-making in machine tool selection. This paper is focused on the integration of a consistent fuzzy AHP (Analytic Hierarchy Process) and a fuzzy COmplex PRoportional ASsessment (COPRAS) for multi-attribute decision-making in selecting the most suitable machine tool. In this method, the fuzzy linguistic reference relation is integrated into AHP to handle the imprecise and vague information, and to simplify the data collection for the pair-wise comparison matrix of the AHP which determines the weights of attributes. The output of the fuzzy AHP is imported into the fuzzy COPRAS method for ranking alternatives through the closeness coefficient. Presentation of the proposed model application is provided by a numerical example based on the collection of data by questionnaire and from the literature. The results highlight the integration of the improved fuzzy AHP and the fuzzy COPRAS as a precise tool and provide effective multi-attribute decision-making for evaluating the machine tool in the uncertain environment.

Efficient bulk-loading of gridfiles

NASA Technical Reports Server (NTRS)

Leutenegger, Scott T.; Nicol, David M.

1994-01-01

This paper considers the problem of bulk-loading large data sets for the gridfile multiattribute indexing technique. We propose a rectilinear partitioning algorithm that heuristically seeks to minimize the size of the gridfile needed to ensure no bucket overflows. Empirical studies on both synthetic data sets and on data sets drawn from computational fluid dynamics applications demonstrate that our algorithm is very efficient, and is able to handle large data sets. In addition, we present an algorithm for bulk-loading data sets too large to fit in main memory. Utilizing a sort of the entire data set it creates a gridfile without incurring any overflows.

Decision Aids for Airborne Intercept Operations in Advanced Aircrafts

NASA Technical Reports Server (NTRS)

Madni, A.; Freedy, A.

1981-01-01

A tactical decision aid (TDA) for the F-14 aircrew, i.e., the naval flight officer and pilot, in conducting a multitarget attack during the performance of a Combat Air Patrol (CAP) role is presented. The TDA employs hierarchical multiattribute utility models for characterizing mission objectives in operationally measurable terms, rule based AI-models for tactical posture selection, and fast time simulation for maneuver consequence prediction. The TDA makes aspect maneuver recommendations, selects and displays the optimum mission posture, evaluates attackable and potentially attackable subsets, and recommends the 'best' attackable subset along with the required course perturbation.

An Updated Version of the U.S. Air Force Multi-Attribute Task Battery (AF-MATB)

DTIC Science & Technology

2014-08-01

assessing human performance in a controlled multitask environment. The most recent release of AF-MATB contains numerous improvements and additions...Strategic Behavior, MATB, Multitasking , Task Battery, Simulator, Multi-Attribute Task Battery, Automation 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF...performance and multitasking strategy. As a result, a specific Information Throughput (IT) Mode was designed to customize the task to fit the Human

Decision Making In Assignment Problem With Multiple Attributes Under Intuitionistic Fuzzy Environment

NASA Astrophysics Data System (ADS)

Mukherjee, Sathi; Basu, Kajla

2010-10-01

In this paper we develop a methodology to solve the multiple attribute assignment problems where the attributes are considered to be Intuitionistic Fuzzy Sets (IFS). We apply the concept of similarity measures of IFS to solve the Intuitionistic Fuzzy Multi-Attribute Assignment Problem (IFMAAP). The weights of the attributes are determined from expert opinion. An illustrative example is solved to verify the developed approach and to demonstrate its practicality.

An Integrated Approach of Fuzzy Linguistic Preference Based AHP and Fuzzy COPRAS for Machine Tool Evaluation

PubMed Central

Nguyen, Huu-Tho; Md Dawal, Siti Zawiah; Nukman, Yusoff; Aoyama, Hideki; Case, Keith

2015-01-01

Globalization of business and competitiveness in manufacturing has forced companies to improve their manufacturing facilities to respond to market requirements. Machine tool evaluation involves an essential decision using imprecise and vague information, and plays a major role to improve the productivity and flexibility in manufacturing. The aim of this study is to present an integrated approach for decision-making in machine tool selection. This paper is focused on the integration of a consistent fuzzy AHP (Analytic Hierarchy Process) and a fuzzy COmplex PRoportional ASsessment (COPRAS) for multi-attribute decision-making in selecting the most suitable machine tool. In this method, the fuzzy linguistic reference relation is integrated into AHP to handle the imprecise and vague information, and to simplify the data collection for the pair-wise comparison matrix of the AHP which determines the weights of attributes. The output of the fuzzy AHP is imported into the fuzzy COPRAS method for ranking alternatives through the closeness coefficient. Presentation of the proposed model application is provided by a numerical example based on the collection of data by questionnaire and from the literature. The results highlight the integration of the improved fuzzy AHP and the fuzzy COPRAS as a precise tool and provide effective multi-attribute decision-making for evaluating the machine tool in the uncertain environment. PMID:26368541

Multi-Response Optimization of WEDM Process Parameters Using Taguchi Based Desirability Function Analysis

NASA Astrophysics Data System (ADS)

Majumder, Himadri; Maity, Kalipada

2018-03-01

Shape memory alloy has a unique capability to return to its original shape after physical deformation by applying heat or thermo-mechanical or magnetic load. In this experimental investigation, desirability function analysis (DFA), a multi-attribute decision making was utilized to find out the optimum input parameter setting during wire electrical discharge machining (WEDM) of Ni-Ti shape memory alloy. Four critical machining parameters, namely pulse on time (TON), pulse off time (TOFF), wire feed (WF) and wire tension (WT) were taken as machining inputs for the experiments to optimize three interconnected responses like cutting speed, kerf width, and surface roughness. Input parameter combination TON = 120 μs., TOFF = 55 μs., WF = 3 m/min. and WT = 8 kg-F were found to produce the optimum results. The optimum process parameters for each desired response were also attained using Taguchi’s signal-to-noise ratio. Confirmation test has been done to validate the optimum machining parameter combination which affirmed DFA was a competent approach to select optimum input parameters for the ideal response quality for WEDM of Ni-Ti shape memory alloy.

Differential Weighting in Multi-Attribute Utility Measurement: When it Should Not and When it does make a Difference

DTIC Science & Technology

1976-08-01

of the motoring public. "The design should balance and optimize characteristics serving environmental, safety, and conservation goals " (McDonald...59 9,738 165 Datsun 610 58 4,766 82 Buick Century 55 5,558 101 Mazda RX4 54 5,207 96 Volkswagen Rabbit 54 4,353 81 AMC Matador 53 4,837 91 Toyota...53 Ford Maverick 8 92 4,229 46 ANMC Hornet 6 94 4,127 44 A’X Pacer 95 4,569 48 Audi Fox 96 5,678 59 Mazda RX4 96 5,207 54 Toyota Corona MIK II 98

An application of multiattribute decision analysis to the Space Station Freedom program. Case study: Automation and robotics technology evaluation

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Levin, Richard R.; Carpenter, Elisabeth J.

1990-01-01

The results are described of an application of multiattribute analysis to the evaluation of high leverage prototyping technologies in the automation and robotics (A and R) areas that might contribute to the Space Station (SS) Freedom baseline design. An implication is that high leverage prototyping is beneficial to the SS Freedom Program as a means for transferring technology from the advanced development program to the baseline program. The process also highlights the tradeoffs to be made between subsidizing high value, low risk technology development versus high value, high risk technology developments. Twenty one A and R Technology tasks spanning a diverse array of technical concepts were evaluated using multiattribute decision analysis. Because of large uncertainties associated with characterizing the technologies, the methodology was modified to incorporate uncertainty. Eight attributes affected the rankings: initial cost, operation cost, crew productivity, safety, resource requirements, growth potential, and spinoff potential. The four attributes of initial cost, operations cost, crew productivity, and safety affected the rankings the most.

Application fuzzy multi-attribute decision analysis method to prioritize project success criteria

NASA Astrophysics Data System (ADS)

Phong, Nguyen Thanh; Quyen, Nguyen Le Hoang Thuy To

2017-11-01

Project success is a foundation for project owner to manage and control not only for the current project but also for future potential projects in construction companies. However, identifying the key success criteria for evaluating a particular project in real practice is a challenging task. Normally, it depends on a lot of factors, such as the expectation of the project owner and stakeholders, triple constraints of the project (cost, time, quality), and company's mission, vision, and objectives. Traditional decision-making methods for measuring the project success are usually based on subjective opinions of panel experts, resulting in irrational and inappropriate decisions. Therefore, this paper introduces a multi-attribute decision analysis method (MADAM) for weighting project success criteria by using fuzzy Analytical Hierarchy Process approach. It is found that this method is useful when dealing with imprecise and uncertain human judgments in evaluating project success criteria. Moreover, this research also suggests that although cost, time, and quality are three project success criteria projects, the satisfaction of project owner and acceptance of project stakeholders with the completed project criteria is the most important criteria for project success evaluation in Vietnam.

Converting Parkinson-Specific Scores into Health State Utilities to Assess Cost-Utility Analysis.

PubMed

Chen, Gang; Garcia-Gordillo, Miguel A; Collado-Mateo, Daniel; Del Pozo-Cruz, Borja; Adsuar, José C; Cordero-Ferrera, José Manuel; Abellán-Perpiñán, José María; Sánchez-Martínez, Fernando Ignacio

2018-06-07

The aim of this study was to compare the Parkinson's Disease Questionnaire-8 (PDQ-8) with three multi-attribute utility (MAU) instruments (EQ-5D-3L, EQ-5D-5L, and 15D) and to develop mapping algorithms that could be used to transform PDQ-8 scores into MAU scores. A cross-sectional study was conducted. A final sample of 228 evaluable patients was included in the analyses. Sociodemographic and clinical data were also collected. Two EQ-5D questionnaires were scored using Spanish tariffs. Two models and three statistical techniques were used to estimate each model in the direct mapping framework for all three MAU instruments, including the most widely used ordinary least squares (OLS), the robust MM-estimator, and the generalized linear model (GLM). For both EQ-5D-3L and EQ-5D-5L, indirect response mapping based on an ordered logit model was also conducted. Three goodness-of-fit tests were employed to compare the models: the mean absolute error (MAE), the root-mean-square error (RMSE), and the intra-class correlation coefficient (ICC) between the predicted and observed utilities. Health state utility scores ranged from 0.61 (EQ-5D-3L) to 0.74 (15D). The mean PDQ-8 score was 27.51. The correlation between overall PDQ-8 score and each MAU instrument ranged from - 0.729 (EQ-5D-5L) to - 0.752 (EQ-5D-3L). A mapping algorithm based on PDQ-8 items had better performance than using the overall score. For the two EQ-5D questionnaires, in general, the indirect mapping approach had comparable or even better performance than direct mapping based on MAE. Mapping algorithms developed in this study enable the estimation of utility values from the PDQ-8. The indirect mapping equations reported for two EQ-5D questionnaires will further facilitate the calculation of EQ-5D utility scores using other country-specific tariffs.

[Application of multiple-attribute utility technology (MAUT) to decisions about a work-site stress-control intervention for public-sector office workers].

PubMed

Hagihara, Akihito; Tarumi, Kimio

2013-01-01

The reasons behind the establishment of particular health-promotion programs in community or work settings are often unclear, and such programs are rarely evaluated from a broad perspective after they are implemented. Thus, multiattribute utility technology (MAUT) was used to design a work-site stress-control program. The sample consisted of public-sector workers in B City in Japan. Stakeholders in the work-site stress-control program included employers (municipal authorities), employees (public workers), and healthcare personnel. Six goals and three strategies (i.e., personnel, self-care, and staff) related to stress-control programs were considered. The results showed that the self-care strategy received the highest score for overall utility (i.e., 96.2), and the overall-utility score for the remaining two strategies was approximately 70. The self-care strategy emerged as the most useful of the three strategies for developing a stress-control program in a target work place. The application of MAUT may be useful for developing an effective stress-control program in occupational settings.

k-RP*{sub s}: A scalable distributed data structure for high-performance multi-attribute access

DOE Office of Scientific and Technical Information (OSTI.GOV)

Litwin, W.; Neimat, M.A.

k-RP*{sub s} is a new data structure for scalable multicomputer files with multi-attribute (k-d) keys. We discuss the k-RP*{sub s} file evolution and search algorithms. Performance analysis shows that a k-RP*{sub s} file can be much larger and orders of magnitude faster than a traditional k-d file. The speed-up is especially important for range and partial match searches that are often impractical with traditional k-d files. This opens up a new perspective for many applications.

Comparison of potential method in analytic hierarchy process for multi-attribute of catering service companies

NASA Astrophysics Data System (ADS)

Mamat, Siti Salwana; Ahmad, Tahir; Awang, Siti Rahmah

2017-08-01

Analytic Hierarchy Process (AHP) is a method used in structuring, measuring and synthesizing criteria, in particular ranking of multiple criteria in decision making problems. On the other hand, Potential Method is a ranking procedure in which utilizes preference graph ς (V, A). Two nodes are adjacent if they are compared in a pairwise comparison whereby the assigned arc is oriented towards the more preferred node. In this paper Potential Method is used to solve problem on a catering service selection. The comparison of result by using Potential method is made with Extent Analysis. The Potential Method is found to produce the same rank as Extent Analysis in AHP.

Production Task Queue Optimization Based on Multi-Attribute Evaluation for Complex Product Assembly Workshop.

PubMed

Li, Lian-Hui; Mo, Rong

2015-01-01

The production task queue has a great significance for manufacturing resource allocation and scheduling decision. Man-made qualitative queue optimization method has a poor effect and makes the application difficult. A production task queue optimization method is proposed based on multi-attribute evaluation. According to the task attributes, the hierarchical multi-attribute model is established and the indicator quantization methods are given. To calculate the objective indicator weight, criteria importance through intercriteria correlation (CRITIC) is selected from three usual methods. To calculate the subjective indicator weight, BP neural network is used to determine the judge importance degree, and then the trapezoid fuzzy scale-rough AHP considering the judge importance degree is put forward. The balanced weight, which integrates the objective weight and the subjective weight, is calculated base on multi-weight contribution balance model. The technique for order preference by similarity to an ideal solution (TOPSIS) improved by replacing Euclidean distance with relative entropy distance is used to sequence the tasks and optimize the queue by the weighted indicator value. A case study is given to illustrate its correctness and feasibility.

Production Task Queue Optimization Based on Multi-Attribute Evaluation for Complex Product Assembly Workshop

PubMed Central

Li, Lian-hui; Mo, Rong

2015-01-01

The production task queue has a great significance for manufacturing resource allocation and scheduling decision. Man-made qualitative queue optimization method has a poor effect and makes the application difficult. A production task queue optimization method is proposed based on multi-attribute evaluation. According to the task attributes, the hierarchical multi-attribute model is established and the indicator quantization methods are given. To calculate the objective indicator weight, criteria importance through intercriteria correlation (CRITIC) is selected from three usual methods. To calculate the subjective indicator weight, BP neural network is used to determine the judge importance degree, and then the trapezoid fuzzy scale-rough AHP considering the judge importance degree is put forward. The balanced weight, which integrates the objective weight and the subjective weight, is calculated base on multi-weight contribution balance model. The technique for order preference by similarity to an ideal solution (TOPSIS) improved by replacing Euclidean distance with relative entropy distance is used to sequence the tasks and optimize the queue by the weighted indicator value. A case study is given to illustrate its correctness and feasibility. PMID:26414758

[A multi-measure analysis of the similarity, attraction, and compromise effects in multi-attribute decision making].

PubMed

Tsuzuki, Takashi; Matsui, Hiroshi; Kikuchi, Manabu

2012-12-01

In multi-attribute decision making, the similarity, attraction, and compromise effects warrant specific investigation as they cause violations of principles in rational choice. In order to investigate these three effects simultaneously, we assigned 145 undergraduates to three context effect conditions. We requested them to solve the same 20 hypothetical purchase problems, each of which had three alternatives described along two attributes. We measured their choices, confidence ratings, and response times. We found that manipulating the third alternative had significant context effects for choice proportions and confidence ratings in all three conditions. Furthermore, the attraction effect was the most prominent with regard to choice proportions. In the compromise effect condition, although the choice proportion of the third alternative was high, the confidence rating was low and the response time was long. These results indicate that the relationship between choice proportions and confidence ratings requires further theoretical investigation. They also suggest that a combination of experimental and modeling studies is imperative to reveal the mechanisms underlying the context effects in multi-attribute, multi-alternative decision making.

A Generalized Measurement Model to Quantify Health: The Multi-Attribute Preference Response Model

PubMed Central

Krabbe, Paul F. M.

2013-01-01

After 40 years of deriving metric values for health status or health-related quality of life, the effective quantification of subjective health outcomes is still a challenge. Here, two of the best measurement tools, the discrete choice and the Rasch model, are combined to create a new model for deriving health values. First, existing techniques to value health states are briefly discussed followed by a reflection on the recent revival of interest in patients’ experience with regard to their possible role in health measurement. Subsequently, three basic principles for valid health measurement are reviewed, namely unidimensionality, interval level, and invariance. In the main section, the basic operation of measurement is then discussed in the framework of probabilistic discrete choice analysis (random utility model) and the psychometric Rasch model. It is then shown how combining the main features of these two models yields an integrated measurement model, called the multi-attribute preference response (MAPR) model, which is introduced here. This new model transforms subjective individual rank data into a metric scale using responses from patients who have experienced certain health states. Its measurement mechanism largely prevents biases such as adaptation and coping. Several extensions of the MAPR model are presented. The MAPR model can be applied to a wide range of research problems. If extended with the self-selection of relevant health domains for the individual patient, this model will be more valid than existing valuation techniques. PMID:24278141

DETERMINATION OF RELATIVE IMPORTANCE OF NONPROLIFERATION FACTORS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richard Metcalf

2009-07-01

Methodologies to determine the proliferation resistance (PR) of nuclear facilities often rely on either expert elicitation, a resource-intensive approach without easily reproducible results, or numeric evaluations, which can fail to take into account the institutional knowledge and expert experience of the nonproliferation community. In an attempt to bridge the gap and bring the institutional knowledge into numeric evaluations of PR, a survey was conducted of 33 individuals to find the relative importance of a set of 62 nonproliferation factors, subsectioned into groups under the headings of Diversion, Transportation, Transformation, and Weaponization. One third of the respondents were self-described nonproliferation professionals,more » and the remaining two thirds were from secondary professions related to nonproliferation, such as industrial engineers or policy analysts. The factors were taken from previous work which used multi-attribute utility analysis with uniform weighting of attributes and did not include institutional knowledge. In both expert and non-expert groups, all four headings and the majority of factors had different relative importance at a confidence of 95% (p=0.05). This analysis and survey demonstrates that institutional knowledge can be brought into numeric evaluations of PR, if there is a sufficient investment of resources made prior to the evaluation.« less

Mirage events & driver haptic steering alerts in a motion-base driving simulator: A method for selecting an optimal HMI.

PubMed

Talamonti, Walter; Tijerina, Louis; Blommer, Mike; Swaminathan, Radhakrishnan; Curry, Reates; Ellis, R Darin

2017-11-01

This paper describes a new method, a 'mirage scenario,' to support formative evaluation of driver alerting or warning displays for manual and automated driving. This method provides driving contexts (e.g., various Times-To-Collision (TTCs) to a lead vehicle) briefly presented and then removed. In the present study, during each mirage event, a haptic steering display was evaluated. This haptic display indicated a steering response may be initiated to drive around an obstacle ahead. A motion-base simulator was used in a 32-participant study to present vehicle motion cues similar to the actual application. Surprise was neither present nor of concern, as it would be for a summative evaluation of a forward collision warning system. Furthermore, no collision avoidance maneuvers were performed, thereby reducing the risk of simulator sickness. This paper illustrates the mirage scenario procedures, the rating methods and definitions used with the mirage scenario, and analysis of the ratings obtained, together with a multi-attribute utility theory (MAUT) approach to evaluate and select among alternative designs for future summative evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Behavioral Modeling of Adversaries with Multiple Objectives in Counterterrorism.

PubMed

Mazicioglu, Dogucan; Merrick, Jason R W

2018-05-01

Attacker/defender models have primarily assumed that each decisionmaker optimizes the cost of the damage inflicted and its economic repercussions from their own perspective. Two streams of recent research have sought to extend such models. One stream suggests that it is more realistic to consider attackers with multiple objectives, but this research has not included the adaption of the terrorist with multiple objectives to defender actions. The other stream builds off experimental studies that show that decisionmakers deviate from optimal rational behavior. In this article, we extend attacker/defender models to incorporate multiple objectives that a terrorist might consider in planning an attack. This includes the tradeoffs that a terrorist might consider and their adaption to defender actions. However, we must also consider experimental evidence of deviations from the rationality assumed in the commonly used expected utility model in determining such adaption. Thus, we model the attacker's behavior using multiattribute prospect theory to account for the attacker's multiple objectives and deviations from rationality. We evaluate our approach by considering an attacker with multiple objectives who wishes to smuggle radioactive material into the United States and a defender who has the option to implement a screening process to hinder the attacker. We discuss the problems with implementing such an approach, but argue that research in this area must continue to avoid misrepresenting terrorist behavior in determining optimal defensive actions. © 2017 Society for Risk Analysis.

Qualitative and quantitative comparison of geostatistical techniques of porosity prediction from the seismic and logging data: a case study from the Blackfoot Field, Alberta, Canada

NASA Astrophysics Data System (ADS)

Maurya, S. P.; Singh, K. H.; Singh, N. P.

2018-05-01

In present study, three recently developed geostatistical methods, single attribute analysis, multi-attribute analysis and probabilistic neural network algorithm have been used to predict porosity in inter well region for Blackfoot field, Alberta, Canada, an offshore oil field. These techniques make use of seismic attributes, generated by model based inversion and colored inversion techniques. The principle objective of the study is to find the suitable combination of seismic inversion and geostatistical techniques to predict porosity and identification of prospective zones in 3D seismic volume. The porosity estimated from these geostatistical approaches is corroborated with the well log porosity. The results suggest that all the three implemented geostatistical methods are efficient and reliable to predict the porosity but the multi-attribute and probabilistic neural network analysis provide more accurate and high resolution porosity sections. A low impedance (6000-8000 m/s g/cc) and high porosity (> 15%) zone is interpreted from inverted impedance and porosity sections respectively between 1060 and 1075 ms time interval and is characterized as reservoir. The qualitative and quantitative results demonstrate that of all the employed geostatistical methods, the probabilistic neural network along with model based inversion is the most efficient method for predicting porosity in inter well region.

Identification of metrics to monitor salt marsh integrity on National Wildlife Refuges in relation to conservation and management objectives

USGS Publications Warehouse

Neckles, Hilary A.; Guntenspergen, Glenn R.; Shriver, W. George; Danz, Nicholas P.; Wiest, Whitney A.; Nagel, Jessica L.; Olker, Jennifer H.

2013-01-01

Implementation of these metrics for quantitative assessment of NWRS salt marsh integrity in FWS Region 5 requires developing sampling designs for each refuge. Additionally, it is important to determine how the monitoring information will be used within a management context. SDM should be used to complete the analysis of salt marsh management decisions. The next steps would involve 1) prioritizing and weighting the management objectives; 2) predicting responses to individual management actions in terms of objectives and metrics; 3) using multiattribute utility theory to convert all measurable attributes to a common utility scale; 4) determining the total management benefit of each action by summing utilities across objectives; and 5) maximizing the total management benefits within cost constraints for each refuge. This process would allow the optimum management decisions for NWRS salt marshes to be selected and implemented based directly on monitoring data and current understanding of marsh responses to management actions. Monitoring the outcome of management actions would then allow new monitoring data to be incorporated into subsequent decisions. 

"Geo-statistics methods and neural networks in geophysical applications: A case study"

NASA Astrophysics Data System (ADS)

Rodriguez Sandoval, R.; Urrutia Fucugauchi, J.; Ramirez Cruz, L. C.

2008-12-01

The study is focus in the Ebano-Panuco basin of northeastern Mexico, which is being explored for hydrocarbon reservoirs. These reservoirs are in limestones and there is interest in determining porosity and permeability in the carbonate sequences. The porosity maps presented in this study are estimated from application of multiattribute and neural networks techniques, which combine geophysics logs and 3-D seismic data by means of statistical relationships. The multiattribute analysis is a process to predict a volume of any underground petrophysical measurement from well-log and seismic data. The data consist of a series of target logs from wells which tie a 3-D seismic volume. The target logs are neutron porosity logs. From the 3-D seismic volume a series of sample attributes is calculated. The objective of this study is to derive a set of attributes and the target log values. The selected set is determined by a process of forward stepwise regression. The analysis can be linear or nonlinear. In the linear mode the method consists of a series of weights derived by least-square minimization. In the nonlinear mode, a neural network is trained using the select attributes as inputs. In this case we used a probabilistic neural network PNN. The method is applied to a real data set from PEMEX. For better reservoir characterization the porosity distribution was estimated using both techniques. The case shown a continues improvement in the prediction of the porosity from the multiattribute to the neural network analysis. The improvement is in the training and the validation, which are important indicators of the reliability of the results. The neural network showed an improvement in resolution over the multiattribute analysis. The final maps provide more realistic results of the porosity distribution.

Multiattribute selection of acute stroke imaging software platform for Extending the Time for Thrombolysis in Emergency Neurological Deficits (EXTEND) clinical trial.

PubMed

Churilov, Leonid; Liu, Daniel; Ma, Henry; Christensen, Soren; Nagakane, Yoshinari; Campbell, Bruce; Parsons, Mark W; Levi, Christopher R; Davis, Stephen M; Donnan, Geoffrey A

2013-04-01

The appropriateness of a software platform for rapid MRI assessment of the amount of salvageable brain tissue after stroke is critical for both the validity of the Extending the Time for Thrombolysis in Emergency Neurological Deficits (EXTEND) Clinical Trial of stroke thrombolysis beyond 4.5 hours and for stroke patient care outcomes. The objective of this research is to develop and implement a methodology for selecting the acute stroke imaging software platform most appropriate for the setting of a multi-centre clinical trial. A multi-disciplinary decision making panel formulated the set of preferentially independent evaluation attributes. Alternative Multi-Attribute Value Measurement methods were used to identify the best imaging software platform followed by sensitivity analysis to ensure the validity and robustness of the proposed solution. Four alternative imaging software platforms were identified. RApid processing of PerfusIon and Diffusion (RAPID) software was selected as the most appropriate for the needs of the EXTEND trial. A theoretically grounded generic multi-attribute selection methodology for imaging software was developed and implemented. The developed methodology assured both a high quality decision outcome and a rational and transparent decision process. This development contributes to stroke literature in the area of comprehensive evaluation of MRI clinical software. At the time of evaluation, RAPID software presented the most appropriate imaging software platform for use in the EXTEND clinical trial. The proposed multi-attribute imaging software evaluation methodology is based on sound theoretical foundations of multiple criteria decision analysis and can be successfully used for choosing the most appropriate imaging software while ensuring both robust decision process and outcomes. © 2012 The Authors. International Journal of Stroke © 2012 World Stroke Organization.

Australian health-related quality of life population norms derived from the SF-6D.

PubMed

Norman, Richard; Church, Jody; van den Berg, Bernard; Goodall, Stephen

2013-02-01

To investigate population health-related quality of life norms in an Australian general sample by age, gender, BMI, education and socioeconomic status. The SF-36 was included in the 2009/10 wave of the Household, Income and Labour Dynamics in Australia (HILDA) survey (n=17,630 individuals across 7,234 households), and converted into SF-6D utility scores. Trends across the various population subgroups were investigated employing population weights to ensure a balanced panel, and were all sub-stratified by gender. SF-6D scores decline with age beyond 40 years, with decreasing education and by higher levels of socioeconomic disadvantage. Scores were also lower at very low and very high BMI levels. Males reported higher SF-6D scores than females across most analyses. This study reports Australian population utility data measured using the SF-6D, based on a national representative sample. These results can be used in a range of policy settings such as cost-utility analysis or exploration of health-related inequality. In general, the patterns are similar to those reported using other multi-attribute utility instruments and in different countries. © 2013 The Authors. ANZJPH © 2013 Public Health Association of Australia.

Decision making for Pap testing among Pacific Islander women.

PubMed

Weiss, Jie W; Mouttapa, Michele; Sablan-Santos, Lola; DeGuzman Lacsamana, Jasmine; Quitugua, Lourdes; Park Tanjasiri, Sora

2016-12-01

This study employed a Multi-Attribute Utility (MAU) model to examine the Pap test decision-making process among Pacific Islanders (PI) residing in Southern California. A total of 585 PI women were recruited through social networks from Samoan and Tongan churches, and Chamorro family clans. A questionnaire assessed Pap test knowledge, beliefs and past behaviour. The three MAU parameters of subjective value, subjective probability and momentary salience were measured for eight anticipated consequences of having a Pap test (e.g., feeling embarrassed, spending money). Logistic regression indicated that women who had a Pap test (Pap women) had higher total MAU utility scores compared to women who had not had a Pap test within the past three years (No Pap women) (adjusted Odds Ratio = 1.10). In particular, Pap women had higher utilities for the positive consequences 'Detecting cervical cancer early, Peace of mind, and Protecting my family', compared to No Pap women. It is concluded that the connection between utility and behaviour offers a promising pathway toward a better understanding of the decision to undergo Pap testing. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Information networks in the stock market based on the distance of the multi-attribute dimensions between listed companies

NASA Astrophysics Data System (ADS)

Liu, Qian; Li, Huajiao; Liu, Xueyong; Jiang, Meihui

2018-04-01

In the stock market, there are widespread information connections between economic agents. Listed companies can obtain mutual information about investment decisions from common shareholders, and the extent of sharing information often determines the relationships between listed companies. Because different shareholder compositions and investment shares lead to different formations of the company's governance mechanisms, we map the investment relationships between shareholders to the multi-attribute dimensional spaces of the listed companies (each shareholder investment in a company is a company dimension). Then, we construct the listed company's information network based on co-shareholder relationships. The weights for the edges in the information network are measured with the Euclidean distance between the listed companies in the multi-attribute dimension space. We define two indices to analyze the information network's features. We conduct an empirical study that analyzes Chinese listed companies' information networks. The results from the analysis show that with the diversification and decentralization of shareholder investments, almost all Chinese listed companies exchanged information through common shareholder relationships, and there is a gradual reduction in information sharing capacity between listed companies that have common shareholders. This network analysis has benefits for risk management and portfolio investments.

Economics of human performance and systems total ownership cost.

PubMed

Onkham, Wilawan; Karwowski, Waldemar; Ahram, Tareq Z

2012-01-01

Financial costs of investing in people is associated with training, acquisition, recruiting, and resolving human errors have a significant impact on increased total ownership costs. These costs can also affect the exaggerate budgets and delayed schedules. The study of human performance economical assessment in the system acquisition process enhances the visibility of hidden cost drivers which support program management informed decisions. This paper presents the literature review of human total ownership cost (HTOC) and cost impacts on overall system performance. Economic value assessment models such as cost benefit analysis, risk-cost tradeoff analysis, expected value of utility function analysis (EV), growth readiness matrix, multi-attribute utility technique, and multi-regressions model were introduced to reflect the HTOC and human performance-technology tradeoffs in terms of the dollar value. The human total ownership regression model introduces to address the influencing human performance cost component measurement. Results from this study will increase understanding of relevant cost drivers in the system acquisition process over the long term.

Technology selection for ballast water treatment by multi-stakeholders: A multi-attribute decision analysis approach based on the combined weights and extension theory.

PubMed

Ren, Jingzheng

2018-01-01

This objective of this study is to develop a generic multi-attribute decision analysis framework for ranking the technologies for ballast water treatment and determine their grades. An evaluation criteria system consisting of eight criteria in four categories was used to evaluate the technologies for ballast water treatment. The Best-Worst method, which is a subjective weighting method and Criteria importance through inter-criteria correlation method, which is an objective weighting method, were combined to determine the weights of the evaluation criteria. The extension theory was employed to prioritize the technologies for ballast water treatment and determine their grades. An illustrative case including four technologies for ballast water treatment, i.e. Alfa Laval (T 1 ), Hyde (T 2 ), Unitor (T 3 ), and NaOH (T 4 ), were studied by the proposed method, and the Hyde (T 2 ) was recognized as the best technology. Sensitivity analysis was also carried to investigate the effects of the combined coefficients and the weights of the evaluation criteria on the final priority order of the four technologies for ballast water treatment. The sum weighted method and the TOPSIS was also employed to rank the four technologies, and the results determined by these two methods are consistent to that determined by the proposed method in this study. Copyright © 2017 Elsevier Ltd. All rights reserved.

Informing vaccine decision-making: A strategic multi-attribute ranking tool for vaccines-SMART Vaccines 2.0.

PubMed

Knobler, Stacey; Bok, Karin; Gellin, Bruce

2017-01-20

SMART Vaccines 2.0 software is being developed to support decision-making among multiple stakeholders in the process of prioritizing investments to optimize the outcomes of vaccine development and deployment. Vaccines and associated vaccination programs are one of the most successful and effective public health interventions to prevent communicable diseases and vaccine researchers are continually working towards expanding targets for communicable and non-communicable diseases through preventive and therapeutic modes. A growing body of evidence on emerging vaccine technologies, trends in disease burden, costs associated with vaccine development and deployment, and benefits derived from disease prevention through vaccination and a range of other factors can inform decision-making and investment in new and improved vaccines and targeted utilization of already existing vaccines. Recognizing that an array of inputs influences these decisions, the strategic multi-attribute ranking method for vaccines (SMART Vaccines 2.0) is in development as a web-based tool-modified from a U.S. Institute of Medicine Committee effort (IOM, 2015)-to highlight data needs and create transparency to facilitate dialogue and information-sharing among decision-makers and to optimize the investment of resources leading to improved health outcomes. Current development efforts of the SMART Vaccines 2.0 framework seek to generate a weighted recommendation on vaccine development or vaccination priorities based on population, disease, economic, and vaccine-specific data in combination with individual preference and weights of user-selected attributes incorporating valuations of health, economics, demographics, public concern, scientific and business, programmatic, and political considerations. Further development of the design and utility of the tool is being carried out by the National Vaccine Program Office of the Department of Health and Human Services and the Fogarty International Center of the National Institutes of Health. We aim to demonstrate the utility of SMART Vaccines 2.0 through the engagement of a community of relevant stakeholders and to identify a limited number of pilot projects to determine explicitly defined attribute preferences and the related data and model requirements that are responsive to user needs and able to improve the use of evidence for vaccine-related decision-making and consequential priorities of vaccination options. Copyright © 2016 Elsevier Ltd. All rights reserved.

Valuing SF-6D Health States Using a Discrete Choice Experiment.

PubMed

Norman, Richard; Viney, Rosalie; Brazier, John; Burgess, Leonie; Cronin, Paula; King, Madeleine; Ratcliffe, Julie; Street, Deborah

2014-08-01

SF-6D utility weights are conventionally produced using a standard gamble (SG). SG-derived weights consistently demonstrate a floor effect not observed with other elicitation techniques. Recent advances in discrete choice methods have allowed estimation of utility weights. The objective was to produce Australian utility weights for the SF-6D and to explore the application of discrete choice experiment (DCE) methods in this context. We hypothesized that weights derived using this method would reflect the largely monotonic construction of the SF-6D. We designed an online DCE and administered it to an Australia-representative online panel (n = 1017). A range of specifications investigating nonlinear preferences with respect to additional life expectancy were estimated using a random-effects probit model. The preferred model was then used to estimate a preference index such that full health and death were valued at 1 and 0, respectively, to provide an algorithm for Australian cost-utility analyses. Physical functioning, pain, mental health, and vitality were the largest drivers of utility weights. Combining levels to remove illogical orderings did not lead to a poorer model fit. Relative to international SG-derived weights, the range of utility weights was larger with 5% of health states valued below zero. s. DCEs can be used to investigate preferences for health profiles and to estimate utility weights for multi-attribute utility instruments. Australian cost-utility analyses can now use domestic SF-6D weights. The comparability of DCE results to those using other elicitation methods for estimating utility weights for quality-adjusted life-year calculations should be further investigated. © The Author(s) 2013.

Comparison of the Multiattribute Utility Instruments EQ-5D and SF-6D in a Europe-Wide Population-Based Cohort of Patients with Inflammatory Bowel Disease 10 Years after Diagnosis.

PubMed

Huppertz-Hauss, Gert; Aas, Eline; Lie Høivik, Marte; Langholz, Ebbe; Odes, Selwyn; Småstuen, Milada; Stockbrugger, Reinhold; Hoff, Geir; Moum, Bjørn; Bernklev, Tomm

2016-01-01

Background. The treatment of chronic inflammatory bowel disease (IBD) is costly, and limited resources call for analyses of the cost effectiveness of therapeutic interventions. The present study evaluated the equivalency of the Short Form 6D (SF-6D) and the Euro QoL (EQ-5D), two preference-based HRQoL instruments that are broadly used in cost-effectiveness analyses, in an unselected IBD patient population. Methods. IBD patients from seven European countries were invited to a follow-up visit ten years after their initial diagnosis. Clinical and demographic data were assessed, and the Short Form 36 (SF-36) was employed. Utility scores were obtained by calculating the SF-6D index values from the SF-36 data for comparison with the scores obtained with the EQ-5D questionnaire. Results. The SF-6D and EQ-5D provided good sensitivities for detecting disease activity-dependent utility differences. However, the single-measure intraclass correlation coefficient was 0.58, and the Bland-Altman plot indicated numerous values beyond the limits of agreement. Conclusions. There was poor agreement between the measures retrieved from the EQ-5D and the SF-6D utility instruments. Although both instruments may provide good sensitivity for the detection of disease activity-dependent utility differences, the instruments cannot be used interchangeably. Cost-utility analyses performed with only one utility instrument must be interpreted with caution.

Comparison of the Multiattribute Utility Instruments EQ-5D and SF-6D in a Europe-Wide Population-Based Cohort of Patients with Inflammatory Bowel Disease 10 Years after Diagnosis

PubMed Central

Aas, Eline; Odes, Selwyn; Småstuen, Milada; Stockbrugger, Reinhold; Hoff, Geir; Moum, Bjørn; Bernklev, Tomm

2016-01-01

Background. The treatment of chronic inflammatory bowel disease (IBD) is costly, and limited resources call for analyses of the cost effectiveness of therapeutic interventions. The present study evaluated the equivalency of the Short Form 6D (SF-6D) and the Euro QoL (EQ-5D), two preference-based HRQoL instruments that are broadly used in cost-effectiveness analyses, in an unselected IBD patient population. Methods. IBD patients from seven European countries were invited to a follow-up visit ten years after their initial diagnosis. Clinical and demographic data were assessed, and the Short Form 36 (SF-36) was employed. Utility scores were obtained by calculating the SF-6D index values from the SF-36 data for comparison with the scores obtained with the EQ-5D questionnaire. Results. The SF-6D and EQ-5D provided good sensitivities for detecting disease activity-dependent utility differences. However, the single-measure intraclass correlation coefficient was 0.58, and the Bland-Altman plot indicated numerous values beyond the limits of agreement. Conclusions. There was poor agreement between the measures retrieved from the EQ-5D and the SF-6D utility instruments. Although both instruments may provide good sensitivity for the detection of disease activity-dependent utility differences, the instruments cannot be used interchangeably. Cost-utility analyses performed with only one utility instrument must be interpreted with caution. PMID:27630711

Choice Rules and Accumulator Networks

PubMed Central

2015-01-01

This article presents a preference accumulation model that can be used to implement a number of different multi-attribute heuristic choice rules, including the lexicographic rule, the majority of confirming dimensions (tallying) rule and the equal weights rule. The proposed model differs from existing accumulators in terms of attribute representation: Leakage and competition, typically applied only to preference accumulation, are also assumed to be involved in processing attribute values. This allows the model to perform a range of sophisticated attribute-wise comparisons, including comparisons that compute relative rank. The ability of a preference accumulation model composed of leaky competitive networks to mimic symbolic models of heuristic choice suggests that these 2 approaches are not incompatible, and that a unitary cognitive model of preferential choice, based on insights from both these approaches, may be feasible. PMID:28670592

Deriving health utilities from the MacNew Heart Disease Quality of Life Questionnaire.

PubMed

Chen, Gang; McKie, John; Khan, Munir A; Richardson, Jeff R

2015-10-01

Quality of life is included in the economic evaluation of health services by measuring the preference for health states, i.e. health state utilities. However, most intervention studies include a disease-specific, not a utility, instrument. Consequently, there has been increasing use of statistical mapping algorithms which permit utilities to be estimated from a disease-specific instrument. The present paper provides such algorithms between the MacNew Heart Disease Quality of Life Questionnaire (MacNew) instrument and six multi-attribute utility (MAU) instruments, the Euroqol (EQ-5D), the Short Form 6D (SF-6D), the Health Utilities Index (HUI) 3, the Quality of Wellbeing (QWB), the 15D (15 Dimension) and the Assessment of Quality of Life (AQoL-8D). Heart disease patients and members of the healthy public were recruited from six countries. Non-parametric rank tests were used to compare subgroup utilities and MacNew scores. Mapping algorithms were estimated using three separate statistical techniques. Mapping algorithms achieved a high degree of precision. Based on the mean absolute error and the intra class correlation the preferred mapping is MacNew into SF-6D or 15D. Using the R squared statistic the preferred mapping is MacNew into AQoL-8D. The algorithms reported in this paper enable MacNew data to be mapped into utilities predicted from any of six instruments. This permits studies which have included the MacNew to be used in cost utility analyses which, in turn, allows the comparison of services with interventions across the health system. © The European Society of Cardiology 2014.

Research of Simple Multi-Attribute Rating Technique for Decision Support

NASA Astrophysics Data System (ADS)

Siregar, Dodi; Arisandi, Diki; Usman, Ari; Irwan, Dedy; Rahim, Robbi

2017-12-01

One of the roles of decision support system is that it can assist the decision maker in obtaining the appropriate alternative with the desired criteria, one of the methods that could apply for the decision maker is SMART method with multicriteria decision making. This multi-criteria decision-making theory has meaning where every alternative has criteria and has value and weight, and the author uses this approach to facilitate decision making with a compelling case. The problems discussed in this paper are classified into problems of a variety Multiobjective (multiple goals to be accomplished) and multicriteria (many of the decisive criteria in reaching such decisions).

Construction of social value or utility-based health indices: the usefulness of factorial experimental design plans.

PubMed

Cadman, D; Goldsmith, C

1986-01-01

Global indices, which aggregate multiple health or function attributes into a single summary indicator, are useful measures in health research. Two key issues must be addressed in the initial stages of index construction from the universe of possible health and function attributes, which ones should be included in a new index? and how simple can the statistical model be to combine attributes into a single numeric index value? Factorial experimental designs were used in the initial stages of developing a function index for evaluating a program for the care of young handicapped children. Beginning with eight attributes judged important to the goals of the program by clinicians, social preference values for different function states were obtained from 32 parents of handicapped children and 32 members of the community. Using category rating methods each rater scored 16 written multi-attribute case descriptions which contained information about a child's status for all eight attributes. Either a good or poor level of each function attribute and age 3 or 5 years were described in each case. Thus, 2(8) = 256 different cases were rated. Two factorial design plans were selected and used to allocate case descriptions to raters. Analysis of variance determined that seven of the eight clinician selected attributes were required in a social value based index for handicapped children. Most importantly, the subsequent steps of index construction could be greatly simplified by the finding that a simple additive statistical model without complex attribute interaction terms was adequate for the index. We conclude that factorial experimental designs are an efficient, feasible and powerful tool for the initial stages of constructing a multi-attribute health index.

Delineating chalk sand distribution of Ekofisk formation using probabilistic neural network (PNN) and stepwise regression (SWR): Case study Danish North Sea field

NASA Astrophysics Data System (ADS)

Haris, A.; Nafian, M.; Riyanto, A.

2017-07-01

Danish North Sea Fields consist of several formations (Ekofisk, Tor, and Cromer Knoll) that was started from the age of Paleocene to Miocene. In this study, the integration of seismic and well log data set is carried out to determine the chalk sand distribution in the Danish North Sea field. The integration of seismic and well log data set is performed by using the seismic inversion analysis and seismic multi-attribute. The seismic inversion algorithm, which is used to derive acoustic impedance (AI), is model-based technique. The derived AI is then used as external attributes for the input of multi-attribute analysis. Moreover, the multi-attribute analysis is used to generate the linear and non-linear transformation of among well log properties. In the case of the linear model, selected transformation is conducted by weighting step-wise linear regression (SWR), while for the non-linear model is performed by using probabilistic neural networks (PNN). The estimated porosity, which is resulted by PNN shows better suited to the well log data compared with the results of SWR. This result can be understood since PNN perform non-linear regression so that the relationship between the attribute data and predicted log data can be optimized. The distribution of chalk sand has been successfully identified and characterized by porosity value ranging from 23% up to 30%.

Parameter Validation for Evaluation of Spaceflight Hardware Reusability

NASA Technical Reports Server (NTRS)

Childress-Thompson, Rhonda; Dale, Thomas L.; Farrington, Phillip

2017-01-01

Within recent years, there has been an influx of companies around the world pursuing reusable systems for space flight. Much like NASA, many of these new entrants are learning that reusable systems are complex and difficult to acheive. For instance, in its first attempts to retrieve spaceflight hardware for future reuse, SpaceX unsuccessfully tried to land on a barge at sea, resulting in a crash-landing. As this new generation of launch developers continues to develop concepts for reusable systems, having a systematic approach for determining the most effective systems for reuse is paramount. Three factors that influence the effective implementation of reusability are cost, operability and reliability. Therefore, a method that integrates these factors into the decision-making process must be utilized to adequately determine whether hardware used in space flight should be reused or discarded. Previous research has identified seven features that contribute to the successful implementation of reusability for space flight applications, defined reusability for space flight applications, highlighted the importance of reusability, and presented areas that hinder successful implementation of reusability. The next step is to ensure that the list of reusability parameters previously identified is comprehensive, and any duplication is either removed or consolidated. The characteristics to judge the seven features as good indicators for successful reuse are identified and then assessed using multiattribute decision making. Next, discriminators in the form of metrics or descriptors are assigned to each parameter. This paper explains the approach used to evaluate these parameters, define the Measures of Effectiveness (MOE) for reusability, and quantify these parameters. Using the MOEs, each parameter is assessed for its contribution to the reusability of the hardware. Potential data sources needed to validate the approach will be identified.

The Multi-Attribute Group Decision-Making Method Based on Interval Grey Trapezoid Fuzzy Linguistic Variables.

PubMed

Yin, Kedong; Wang, Pengyu; Li, Xuemei

2017-12-13

With respect to multi-attribute group decision-making (MAGDM) problems, where attribute values take the form of interval grey trapezoid fuzzy linguistic variables (IGTFLVs) and the weights (including expert and attribute weight) are unknown, improved grey relational MAGDM methods are proposed. First, the concept of IGTFLV, the operational rules, the distance between IGTFLVs, and the projection formula between the two IGTFLV vectors are defined. Second, the expert weights are determined by using the maximum proximity method based on the projection values between the IGTFLV vectors. The attribute weights are determined by the maximum deviation method and the priorities of alternatives are determined by improved grey relational analysis. Finally, an example is given to prove the effectiveness of the proposed method and the flexibility of IGTFLV.

A systematic literature review of health state utility values in head and neck cancer.

PubMed

Meregaglia, Michela; Cairns, John

2017-09-02

Health state utility values (HSUVs) are essential parameters in model-based economic evaluations. This study systematically identifies HSUVs in head and neck cancer and provides guidance for selecting them from a growing body of health-related quality of life studies. We systematically reviewed the published literature by searching PubMed, EMBASE and The Cochrane Library using a pre-defined combination of keywords. The Tufts Cost-Effectiveness Analysis Registry and the School of Health and Related Research Health Utilities Database (ScHARRHUD) specifically containing health utilities were also queried, in addition to the Health Economics Research Centre database of mapping studies. Studies were considered for inclusion if reporting original HSUVs assessed using established techniques. The characteristics of each study including country, design, sample size, cancer subsite addressed and demographics of responders were summarized narratively using a data extraction form. Quality scoring and critical appraisal of the included studies were performed based on published recommendations. Of a total 1048 records identified by the search, 28 studies qualified for data extraction and 346 unique HSUVs were retrieved from them. HSUVs were estimated using direct methods (e.g. standard gamble; n = 10 studies), multi-attribute utility instruments (MAUIs; n = 13) and mapping techniques (n = 3); two studies adopted both direct and indirect approaches. Within the MAUIs, the EuroQol 5-dimension questionnaire (EQ-5D) was the most frequently used (n = 11), followed by the Health Utility Index Mark 3 (HUI3; n = 2), the 15D (n = 2) and the Short Form-Six Dimension (SF-6D; n = 1). Different methods and types of responders (i.e. patients, healthy subjects, clinical experts) influenced the magnitude of HSUVs for comparable health states. Only one mapping study developed an original algorithm using head and neck cancer data. The identified studies were considered of intermediate quality. This review provides a dataset of HSUVs systematically retrieved from published studies in head and neck cancer. There is currently a lack of research for some disease phases including recurrent and metastatic cancer, and treatment-related complications. In selecting HSUVs for cost-effectiveness modeling purposes, preference should be given to EQ-5D utility values; however, mapping to EQ-5D is a potentially valuable technique that should be further developed in this cancer population.

Comparing and explaining differences in the magnitude, content, and sensitivity of utilities predicted by the EQ-5D, SF-6D, HUI 3, 15D, QWB, and AQoL-8D multiattribute utility instruments.

PubMed

Richardson, Jeff; Khan, Munir A; Iezzi, Angelo; Maxwell, Aimee

2015-04-01

Cost utility analysis permits the comparison of disparate health services by measuring outcomes in comparable units, namely, quality-adjusted life-years, which equal life-years times the utility of the health state. However, comparability is compromised when different utility instruments predict different utilities for the same health state. The present paper measures the extent of, and reason for, differences between the utilities predicted by the EQ-5D-5L, SF-6D, HUI 3, 15D, QWB, and AQoL-8D. Data were obtained from patients in seven disease areas and members of the healthy public in six countries. Differences between public and patient utilities were estimated using each of the instruments. To explain discrepancies between the estimates, the measurement scales and content of the instruments were compared. The sensitivity of instruments to independently measured health dimensions was measured in pairwise comparisons of all combinations of the instruments. The difference between public and patient utilities varied with the choice of instrument by more than 50% for every disease group and in four of the seven groups by more than 100%. Discrepancies were associated with differences in both the instrument content and their measurement scales. Pairwise comparisons of instruments found that variation in the sensitivity to physical and psychosocial dimensions of health closely reflected the items in the instrument's descriptive systems. Results indicate that instruments measure related but different constructs. They imply that commonly used instruments systematically discriminate against some classes of services, most notably mental health services. Differences in the instrument scales imply the need for transformations between the instruments to increase the comparability of measurement. © The Author(s) 2014.

Deriving preference order of post-mining land-uses through MLSA framework: application of an outranking technique

NASA Astrophysics Data System (ADS)

Soltanmohammadi, Hossein; Osanloo, Morteza; Aghajani Bazzazi, Abbas

2009-08-01

This study intends to take advantage of a previously developed framework for mined land suitability analysis (MLSA) consisted of economical, social, technical and mine site factors to achieve a partial and also a complete pre-order of feasible post-mining land-uses. Analysis by an outranking multi-attribute decision-making (MADM) technique, called PROMETHEE (preference ranking organization method for enrichment evaluation), was taken into consideration because of its clear advantages on the field of MLSA as compared with MADM ranking techniques. Application of the proposed approach on a mined land can be completed through some successive steps. First, performance of the MLSA attributes is scored locally by each individual decision maker (DM). Then the assigned performance scores are normalized and the deviation amplitudes of non-dominated alternatives are calculated. Weights of the attributes are calculated by another MADM technique namely, analytical hierarchy process (AHP) in a separate procedure. Using the Gaussian preference function beside the weights, the preference indexes of the land-use alternatives are obtained. Calculation of the outgoing and entering flows of the alternatives and one by one comparison of these values will lead to partial pre-order of them and calculation of the net flows, will lead to a ranked preference for each land-use. At the final step, utilizing the PROMETHEE group decision support system which incorporates judgments of all the DMs, a consensual ranking can be derived. In this paper, preference order of post-mining land-uses for a hypothetical mined land has been derived according to judgments of one DM to reveal applicability of the proposed approach.

Latin American Clinical Epidemiology Network Series - Paper 4: Economic evaluation of Kangaroo Mother Care: cost utility analysis of results from a randomized controlled trial conducted in Bogotá.

PubMed

Ruiz, Juan Gabriel; Charpak, Nathalie; Castillo, Mario; Bernal, Astrid; Ríos, John; Trujillo, Tammy; Córdoba, María Adelaida

2017-06-01

Although kangaroo mother care (KMC) has been shown to be safe and effective in randomized controlled trials (RCTs), there are no published complete economic evaluations including the three components of the full intervention. A cost utility analysis performed on the results of an RCT conducted in Bogotá, Colombia between 1993 and 1996. Hospital and ambulatory costs were estimated by microcosting in a sample of preterm infants from a University Hospital in Bogotá in 2011 and at a KMC clinic in the same period. Utility scores were assigned by experts by means of (1) direct ordering and scoring discrete health states and (2) constructing a multi-attribute utility function. Ninety-five percent confidence intervals (CIs) for the incremental cost-utility ratios (ICURs) were computed by the Fiellers theorem method. One-way sensitivity analysis on price estimates for valuing costs was performed. ICUR at 1 year of corrected age was $ -1,546 per extra quality-adjusted life year gained using the KMC method (95% CI $ -7,963 to $ 4,910). In Bogotá, the use of KMC is dominant: more effective and cost-saving. Although results from an economic analysis should not be extrapolated to different systems and communities, this dominant result suggests that KMC could be cost-effective in similar low and middle income countries settings. Copyright © 2016 Elsevier Inc. All rights reserved.

TIES for Dummies 3rd Edition (Technology Identification, Evaluation, and Selection) Basic how to's to implement the TIES method

NASA Technical Reports Server (NTRS)

Kirby, Michelle R.

2002-01-01

The TIES method is a forecasting environment whereby the decision-maker has the ability to easily assess and trade-off the impact of various technologies without sophisticated and time-consuming mathematical formulations. TIES provides a methodical approach where technically feasible alternatives can be identified with accuracy and speed to reduce design cycle time, and subsequently, life cycle costs, and was achieved through the use of various probabilistic methods, such as Response Surface Methodology and Monte Carlo Simulations. Furthermore, structured and systematic techniques are utilized from other fields to identify possible concepts and evaluation criteria by which comparisons can be made. This objective is achieved by employing the use of Morphological Matrices and Multi-Attribute Decision Making techniques. Through the execution of each step, a family of design alternatives for a given set of customer requirements can be identified and assessed subjectively or objectively. This methodology allows for more information (knowledge) to be brought into the earlier phases of the design process and will have direct implications on the affordability of the system. The increased knowledge allows for optimum allocation of company resources and quantitative justification for program decisions. Finally, the TIES method provided novel results and quantitative justification to facilitate decision making in the early stages of design so as to produce affordable and quality products.

A Decision-Making Method with Grey Multi-Source Heterogeneous Data and Its Application in Green Supplier Selection

PubMed Central

Dang, Yaoguo; Mao, Wenxin

2018-01-01

In view of the multi-attribute decision-making problem that the attribute values are grey multi-source heterogeneous data, a decision-making method based on kernel and greyness degree is proposed. The definitions of kernel and greyness degree of an extended grey number in a grey multi-source heterogeneous data sequence are given. On this basis, we construct the kernel vector and greyness degree vector of the sequence to whiten the multi-source heterogeneous information, then a grey relational bi-directional projection ranking method is presented. Considering the multi-attribute multi-level decision structure and the causalities between attributes in decision-making problem, the HG-DEMATEL method is proposed to determine the hierarchical attribute weights. A green supplier selection example is provided to demonstrate the rationality and validity of the proposed method. PMID:29510521

The Multi-Attribute Task Battery II (MATB-II) Software for Human Performance and Workload Research: A User's Guide

NASA Technical Reports Server (NTRS)

Santiago-Espada, Yamira; Myer, Robert R.; Latorella, Kara A.; Comstock, James R., Jr.

2011-01-01

The Multi-Attribute Task Battery (MAT Battery). is a computer-based task designed to evaluate operator performance and workload, has been redeveloped to operate in Windows XP Service Pack 3, Windows Vista and Windows 7 operating systems.MATB-II includes essentially the same tasks as the original MAT Battery, plus new configuration options including a graphical user interface for controlling modes of operation. MATB-II can be executed either in training or testing mode, as defined by the MATB-II configuration file. The configuration file also allows set up of the default timeouts for the tasks, the flow rates of the pumps and tank levels of the Resource Management (RESMAN) task. MATB-II comes with a default event file that an experimenter can modify and adapt

A Decision-Making Method with Grey Multi-Source Heterogeneous Data and Its Application in Green Supplier Selection.

PubMed

Sun, Huifang; Dang, Yaoguo; Mao, Wenxin

2018-03-03

In view of the multi-attribute decision-making problem that the attribute values are grey multi-source heterogeneous data, a decision-making method based on kernel and greyness degree is proposed. The definitions of kernel and greyness degree of an extended grey number in a grey multi-source heterogeneous data sequence are given. On this basis, we construct the kernel vector and greyness degree vector of the sequence to whiten the multi-source heterogeneous information, then a grey relational bi-directional projection ranking method is presented. Considering the multi-attribute multi-level decision structure and the causalities between attributes in decision-making problem, the HG-DEMATEL method is proposed to determine the hierarchical attribute weights. A green supplier selection example is provided to demonstrate the rationality and validity of the proposed method.

Contribution of the multi-attribute value theory to conflict resolution in groundwater management - application to the Mancha Oriental groundwater system, Spain

NASA Astrophysics Data System (ADS)

Apperl, B.; Pulido-Velazquez, M.; Andreu, J.; Karjalainen, T. P.

2015-03-01

The implementation of the EU Water Framework Directive demands participatory water resource management approaches. Decision making in groundwater quantity and quality management is complex because of the existence of many independent actors, heterogeneous stakeholder interests, multiple objectives, different potential policies, and uncertain outcomes. Conflicting stakeholder interests have often been identified as an impediment to the realisation and success of water regulations and policies. The management of complex groundwater systems requires the clarification of stakeholders' positions (identifying stakeholder preferences and values), improving transparency with respect to outcomes of alternatives, and moving the discussion from the selection of alternatives towards the definition of fundamental objectives (value-thinking approach), which facilitates negotiation. The aims of the study are to analyse the potential of the multi-attribute value theory for conflict resolution in groundwater management and to evaluate the benefit of stakeholder incorporation into the different stages of the planning process, to find an overall satisfying solution for groundwater management. The research was conducted in the Mancha Oriental groundwater system (Spain), subject to intensive use of groundwater for irrigation. A complex set of objectives and attributes was defined, and the management alternatives were created by a combination of different fundamental actions, considering different implementation stages and future changes in water resource availability. Interviews were conducted with representative stakeholder groups using an interactive platform, showing simultaneously the consequences of changes in preferences to the alternative ranking. Results show that the approval of alternatives depends strongly on the combination of measures and the implementation stages. Uncertainties in the results were notable, but did not influence the alternative ranking heavily. The expected reduction in future groundwater resources by climate change increases the conflict potential. The implementation of the method in a very complex case study, with many conflicting objectives and alternatives and uncertain outcomes, including future scenarios under water limiting conditions, illustrates the potential of the method for supporting management decisions.

A response-time approach to comparing generalized rational and take-the-best models of decision making.

PubMed

Bergert, F Bryan; Nosofsky, Robert M

2007-01-01

The authors develop and test generalized versions of take-the-best (TTB) and rational (RAT) models of multiattribute paired-comparison inference. The generalized models make allowances for subjective attribute weighting, probabilistic orders of attribute inspection, and noisy decision making. A key new test involves a response-time (RT) approach. TTB predicts that RT is determined solely by the expected time required to locate the 1st discriminating attribute, whereas RAT predicts that RT is determined by the difference in summed evidence between the 2 alternatives. Critical test pairs are used that partially decouple these 2 factors. Under conditions in which ideal observer TTB and RAT strategies yield equivalent decisions, both the RT results and the estimated attribute weights suggest that the vast majority of subjects adopted the generalized TTB strategy. The RT approach is also validated in an experimental condition in which use of a RAT strategy is essentially forced upon subjects. (c) 2007 APA, all rights reserved.

Strategic Technology Investment Analysis: An Integrated System Approach

NASA Technical Reports Server (NTRS)

Adumitroaie, V.; Weisbin, C. R.

2010-01-01

Complex technology investment decisions within NASA are increasingly difficult to make such that the end results are satisfying the technical objectives and all the organizational constraints. Due to a restricted science budget environment and numerous required technology developments, the investment decisions need to take into account not only the functional impact on the program goals, but also development uncertainties and cost variations along with maintaining a healthy workforce. This paper describes an approach for optimizing and qualifying technology investment portfolios from the perspective of an integrated system model. The methodology encompasses multi-attribute decision theory elements and sensitivity analysis. The evaluation of the degree of robustness of the recommended portfolio provides the decision-maker with an array of viable selection alternatives, which take into account input uncertainties and possibly satisfy nontechnical constraints. The methodology is presented in the context of assessing capability development portfolios for NASA technology programs.

Hierarchical competitions subserving multi-attribute choice

PubMed Central

Hunt, Laurence T; Dolan, Raymond J; Behrens, Timothy EJ

2015-01-01

Valuation is a key tenet of decision neuroscience, where it is generally assumed that different attributes of competing options are assimilated into unitary values. Such values are central to current neural models of choice. By contrast, psychological studies emphasize complex interactions between choice and valuation. Principles of neuronal selection also suggest competitive inhibition may occur in early valuation stages, before option selection. Here, we show behavior in multi-attribute choice is best explained by a model involving competition at multiple levels of representation. This hierarchical model also explains neural signals in human brain regions previously linked to valuation, including striatum, parietal and prefrontal cortex, where activity represents competition within-attribute, competition between attributes, and option selection. This multi-layered inhibition framework challenges the assumption that option values are computed before choice. Instead our results indicate a canonical competition mechanism throughout all stages of a processing hierarchy, not simply at a final choice stage. PMID:25306549

Visual analytics techniques for large multi-attribute time series data

NASA Astrophysics Data System (ADS)

Hao, Ming C.; Dayal, Umeshwar; Keim, Daniel A.

2008-01-01

Time series data commonly occur when variables are monitored over time. Many real-world applications involve the comparison of long time series across multiple variables (multi-attributes). Often business people want to compare this year's monthly sales with last year's sales to make decisions. Data warehouse administrators (DBAs) want to know their daily data loading job performance. DBAs need to detect the outliers early enough to act upon them. In this paper, two new visual analytic techniques are introduced: The color cell-based Visual Time Series Line Charts and Maps highlight significant changes over time in a long time series data and the new Visual Content Query facilitates finding the contents and histories of interesting patterns and anomalies, which leads to root cause identification. We have applied both methods to two real-world applications to mine enterprise data warehouse and customer credit card fraud data to illustrate the wide applicability and usefulness of these techniques.

Application of the fuzzy topsis multi-attribute decision making method to determine scholarship recipients

NASA Astrophysics Data System (ADS)

Irvanizam, I.

2018-03-01

Some scholarships have been routinely offered by Ministry of Research, Technology and Higher Education of the Republic of Indonesia for students at Syiah Kuala University. In reality, the scholarship selection process is becoming subjective and highly complex problem. Multi-Attribute Decision Making (MADM) techniques can be a solution in order to solve scholarship selection problem. In this study, we demonstrated the application of a fuzzy TOPSIS as an MADM technique by using a numerical example in order to calculate a triangular fuzzy number for the fuzzy data onto a normalized weight. We then use this normalized value to construct the normalized fuzzy decision matrix. We finally use the fuzzy TOPSIS to rank alternatives in descending order based on the relative closeness to the ideal solution. The result in terms of final ranking shows slightly different from the previous work.

Advanced GPR imaging of sedimentary features: integrated attribute analysis applied to sand dunes

NASA Astrophysics Data System (ADS)

Zhao, Wenke; Forte, Emanuele; Fontolan, Giorgio; Pipan, Michele

2018-04-01

We evaluate the applicability and the effectiveness of integrated GPR attribute analysis to image the internal sedimentary features of the Piscinas Dunes, SW Sardinia, Italy. The main objective is to explore the limits of GPR techniques to study sediment-bodies geometry and to provide a non-invasive high-resolution characterization of the different subsurface domains of dune architecture. On such purpose, we exploit the high-quality Piscinas data-set to extract and test different attributes of the GPR trace. Composite displays of multi-attributes related to amplitude, frequency, similarity and textural features are displayed with overlays and RGB mixed models. A multi-attribute comparative analysis is used to characterize different radar facies to better understand the characteristics of internal reflection patterns. The results demonstrate that the proposed integrated GPR attribute analysis can provide enhanced information about the spatial distribution of sediment bodies, allowing an enhanced and more constrained data interpretation.

Max-margin multiattribute learning with low-rank constraint.

PubMed

Zhang, Qiang; Chen, Lin; Li, Baoxin

2014-07-01

Attribute learning has attracted a lot of interests in recent years for its advantage of being able to model high-level concepts with a compact set of midlevel attributes. Real-world objects often demand multiple attributes for effective modeling. Most existing methods learn attributes independently without explicitly considering their intrinsic relatedness. In this paper, we propose max margin multiattribute learning with low-rank constraint, which learns a set of attributes simultaneously, using only relative ranking of the attributes for the data. By learning all the attributes simultaneously through low-rank constraint, the proposed method is able to capture their intrinsic correlation for improved learning; by requiring only relative ranking, the method avoids restrictive binary labels of attributes that are often assumed by many existing techniques. The proposed method is evaluated on both synthetic data and real visual data including a challenging video data set. Experimental results demonstrate the effectiveness of the proposed method.

DSPCP: A Data Scalable Approach for Identifying Relationships in Parallel Coordinates.

PubMed

Nguyen, Hoa; Rosen, Paul

2018-03-01

Parallel coordinates plots (PCPs) are a well-studied technique for exploring multi-attribute datasets. In many situations, users find them a flexible method to analyze and interact with data. Unfortunately, using PCPs becomes challenging as the number of data items grows large or multiple trends within the data mix in the visualization. The resulting overdraw can obscure important features. A number of modifications to PCPs have been proposed, including using color, opacity, smooth curves, frequency, density, and animation to mitigate this problem. However, these modified PCPs tend to have their own limitations in the kinds of relationships they emphasize. We propose a new data scalable design for representing and exploring data relationships in PCPs. The approach exploits the point/line duality property of PCPs and a local linear assumption of data to extract and represent relationship summarizations. This approach simultaneously shows relationships in the data and the consistency of those relationships. Our approach supports various visualization tasks, including mixed linear and nonlinear pattern identification, noise detection, and outlier detection, all in large data. We demonstrate these tasks on multiple synthetic and real-world datasets.

Integrated optimisation technique based on computer-aided capacity and safety evaluation for managing downstream lane-drop merging area of signalised junctions

NASA Astrophysics Data System (ADS)

Chen, CHAI; Yiik Diew, WONG

2017-02-01

This study provides an integrated strategy, encompassing microscopic simulation, safety assessment, and multi-attribute decision-making, to optimize traffic performance at downstream merging area of signalized intersections. A Fuzzy Cellular Automata (FCA) model is developed to replicate microscopic movement and merging behavior. Based on simulation experiment, the proposed FCA approach is able to provide capacity and safety evaluation of different traffic scenarios. The results are then evaluated through data envelopment analysis (DEA) and analytic hierarchy process (AHP). Optimized geometric layout and control strategies are then suggested for various traffic conditions. An optimal lane-drop distance that is dependent on traffic volume and speed limit can thus be established at the downstream merging area.

Using Geographic Information Systems (GIS) to understand a community's primary care needs.

PubMed

Dulin, Michael F; Ludden, Thomas M; Tapp, Hazel; Blackwell, Joshua; de Hernandez, Brisa Urquieta; Smith, Heather A; Furuseth, Owen J

2010-01-01

A key element for reducing health care costs and improving community health is increased access to primary care and preventative health services. Geographic information systems (GIS) have the potential to assess patterns of health care utilization and community-level attributes to identify geographic regions most in need of primary care access. GIS, analytical hierarchy process, and multiattribute assessment and evaluation techniques were used to examine attributes describing primary care need and identify areas that would benefit from increased access to primary care services. Attributes were identified by a collaborative partnership working within a practice-based research network using tenets of community-based participatory research. Maps were created based on socioeconomic status, population density, insurance status, and emergency department and primary care safety-net utilization. Individual and composite maps identified areas in our community with the greatest need for increased access to primary care services. Applying GIS to commonly available community- and patient-level data can rapidly identify areas most in need of increased access to primary care services. We have termed this a Multiple Attribute Primary Care Targeting Strategy. This model can be used to plan health services delivery as well as to target and evaluate interventions designed to improve health care access.

Multiattribute probabilistic prostate elastic registration (MAPPER): Application to fusion of ultrasound and magnetic resonance imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sparks, Rachel, E-mail: rachel.sparks@ucl.ac.uk; Barratt, Dean; Nicolas Bloch, B.

2015-03-15

Purpose: Transrectal ultrasound (TRUS)-guided needle biopsy is the current gold standard for prostate cancer diagnosis. However, up to 40% of prostate cancer lesions appears isoechoic on TRUS. Hence, TRUS-guided biopsy has a high false negative rate for prostate cancer diagnosis. Magnetic resonance imaging (MRI) is better able to distinguish prostate cancer from benign tissue. However, MRI-guided biopsy requires special equipment and training and a longer procedure time. MRI-TRUS fusion, where MRI is acquired preoperatively and then aligned to TRUS, allows for advantages of both modalities to be leveraged during biopsy. MRI-TRUS-guided biopsy increases the yield of cancer positive biopsies. Inmore » this work, the authors present multiattribute probabilistic postate elastic registration (MAPPER) to align prostate MRI and TRUS imagery. Methods: MAPPER involves (1) segmenting the prostate on MRI, (2) calculating a multiattribute probabilistic map of prostate location on TRUS, and (3) maximizing overlap between the prostate segmentation on MRI and the multiattribute probabilistic map on TRUS, thereby driving registration of MRI onto TRUS. MAPPER represents a significant advancement over the current state-of-the-art as it requires no user interaction during the biopsy procedure by leveraging texture and spatial information to determine the prostate location on TRUS. Although MAPPER requires manual interaction to segment the prostate on MRI, this step is performed prior to biopsy and will not substantially increase biopsy procedure time. Results: MAPPER was evaluated on 13 patient studies from two independent datasets—Dataset 1 has 6 studies acquired with a side-firing TRUS probe and a 1.5 T pelvic phased-array coil MRI; Dataset 2 has 7 studies acquired with a volumetric end-firing TRUS probe and a 3.0 T endorectal coil MRI. MAPPER has a root-mean-square error (RMSE) for expert selected fiducials of 3.36 ± 1.10 mm for Dataset 1 and 3.14 ± 0.75 mm for Dataset 2. State-of-the-art MRI-TRUS fusion methods report RMSE of 3.06–2.07 mm. Conclusions: MAPPER aligns MRI and TRUS imagery without manual intervention ensuring efficient, reproducible registration. MAPPER has a similar RMSE to state-of-the-art methods that require manual intervention.« less

[Comparative study on promoting blood effects of Danshen-Honghua herb pair with different preparations based on chemometrics and multi-attribute comprehensive index methods].

PubMed

Qu, Cheng; Tang, Yu-Ping; Shi, Xu-Qin; Zhou, Gui-Sheng; Shang, Er-Xin; Shang, Li-Li; Guo, Jian-Ming; Liu, Pei; Zhao, Jing; Zhao, Bu-Chang; Duan, Jin-Ao

2017-08-01

To evaluate the promoting blood circulation and removing blood stasis effects of Danshen-Honghua(DH) herb pair with different preparations (alcohol, 50% alcohol and water) on blood rheology and coagulation functions in acute blood stasis rats, and optimize the best preparation method of DH based on principal component analysis(PCA), hierarchical cluster heatmap analysis and multi-attribute comprehensive index methods. Ice water bath and subcutaneous injection of adrenaline were both used to establish the acute blood stasis rat model. Then the blood stasis rats were administrated intragastrically with DH (alcohol, 50% alcohol and water) extracts. The whole blood viscosity(WBV), plasma viscosity(PV), erythrocyte sedimentation rate(ESR) and haematocrit(HCT) were tested to observe the effects of DH herb pair with different preparations and doses on hemorheology of blood stasis rats; the activated partial thromboplastin time(APTT), thrombin time(TT), prothrombin time(PT), and plasma fibrinogen(FIB) were tested to observe the effects of DH herb pair with different preparations on blood coagulation function and platelet aggregation of blood stasis rats. Then PCA, hierarchical cluster heatmap analysis and multi-attribute comprehensive index methods were all used to comprehensively evaluate the total promoting blood circulation and removing blood stasis effects of DH herb pair with different preparations. The hemorheological indexes and coagulation parameters of model group had significant differences with normal blank group. As compared with the model group, the DH herb pair with different preparations at low, middle and high doses could improve the blood hemorheology indexes and coagulation parameters in acute blood stasis rats with dose-effect relation. Based on the PCA, hierarchical cluster heatmap analysis and multi-attribute comprehensive index methods, the high dose group of 50% alcohol extract had the best effect of promoting blood circulation and removing blood stasis. Under the same dose but different preparations, 50% alcohol DH could obviously improve the hemorheology and blood coagulation function in acute blood stasis rats. These results suggested that DH herb pair with different preparations could obviously ameliorate the abnormality of hemorheology and blood coagulation function in acute blood stasis rats, and the optimized preparation of DH herb pair on promoting blood effects was 50% alcohol extract, providing scientific basis for more effective application of the DH herb pair in modern clinic medicine. Copyright© by the Chinese Pharmaceutical Association.

Estimating QALY gains in applied studies: a review of cost-utility analyses published in 2010.

PubMed

Wisløff, Torbjørn; Hagen, Gunhild; Hamidi, Vida; Movik, Espen; Klemp, Marianne; Olsen, Jan Abel

2014-04-01

Reimbursement agencies in several countries now require health outcomes to be measured in terms of quality-adjusted life-years (QALYs), leading to an immense increase in publications reporting QALY gains. However, there is a growing concern that the various 'multi-attribute utility' (MAU) instruments designed to measure the Q in the QALY yield disparate values, implying that results from different instruments are incommensurable. By reviewing cost-utility analyses published in 2010, we aim to contribute to improved knowledge on how QALYs are currently calculated in applied analyses; how transparently QALY measurement is presented; and how large the expected incremental QALY gains are. We searched Embase, MEDLINE and NHS EED for all cost-utility analyses published in 2010. All analyses that had estimated QALYs gained from health interventions were included. Of the 370 studies included in this review, 48% were pharmacoeconomic evaluations. Active comparators were used in 71% of studies. The median incremental QALY gain was 0.06, which translates to 3 weeks in best imaginable health. The EQ-5D-3L is the dominant instrument used. However, reporting of how QALY gains are estimated is generally inadequate. In 55% of the studies there was no reference to which MAU instrument or direct valuation method QALY data came from. The methods used for estimating expected QALY gains are not transparently reported in published papers. Given the wide variation in utility scores that different methodologies may assign to an identical health state, it is important for journal editors to require a more transparent way of reporting the estimation of incremental QALY gains.

Measuring the Sensitivity and Construct Validity of 6 Utility Instruments in 7 Disease Areas.

PubMed

Richardson, Jeff; Iezzi, Angelo; Khan, Munir A; Chen, Gang; Maxwell, Aimee

2016-02-01

Health services that affect quality of life (QoL) are increasingly evaluated using cost utility analyses (CUA). These commonly employ one of a small number of multiattribute utility instruments (MAUI) to assess the effects of the health service on utility. However, the MAUI differ significantly, and the choice of instrument may alter the outcome of an evaluation. The present article has 2 objectives: 1) to compare the results of 3 measures of the sensitivity of 6 MAUI and the results of 6 tests of construct validity in 7 disease areas and 2) to rank the MAUI by each of the test results in each disease area and by an overall composite index constructed from the tests. Patients and the general public were administered a battery of instruments, which included the 6 MAUI, disease-specific QoL instruments (DSI), and 6 other comparator instruments. In each disease area, instrument sensitivity was measured 3 ways: by the unadjusted mean difference in utility between public and patient groups, by the value of the effect size, and by the correlation between MAUI and DSI scores. Content and convergent validity were tested by comparison of MAUI utilities and scores from the 6 comparator instruments. These included 2 measures of health state preferences, measures of subjective well-being and capabilities, and generic measures of physical and mental QoL derived from the SF-36. The apparent sensitivity of instruments varied significantly with the measurement method and by disease area. Validation test results varied with the comparator instruments. Notwithstanding this variability, the 15D, AQoL-8D, and the SF-6D generally achieved better test results than the QWB and EQ-5D-5L. © The Author(s) 2015.

Integrated continuous bioprocessing: Economic, operational, and environmental feasibility for clinical and commercial antibody manufacture.

PubMed

Pollock, James; Coffman, Jon; Ho, Sa V; Farid, Suzanne S

2017-07-01

This paper presents a systems approach to evaluating the potential of integrated continuous bioprocessing for monoclonal antibody (mAb) manufacture across a product's lifecycle from preclinical to commercial manufacture. The economic, operational, and environmental feasibility of alternative continuous manufacturing strategies were evaluated holistically using a prototype UCL decisional tool that integrated process economics, discrete-event simulation, environmental impact analysis, operational risk analysis, and multiattribute decision-making. The case study focused on comparing whole bioprocesses that used either batch, continuous or a hybrid combination of batch and continuous technologies for cell culture, capture chromatography, and polishing chromatography steps. The cost of goods per gram (COG/g), E-factor, and operational risk scores of each strategy were established across a matrix of scenarios with differing combinations of clinical development phase and company portfolio size. The tool outputs predict that the optimal strategy for early phase production and small/medium-sized companies is the integrated continuous strategy (alternating tangential flow filtration (ATF) perfusion, continuous capture, continuous polishing). However, the top ranking strategy changes for commercial production and companies with large portfolios to the hybrid strategy with fed-batch culture, continuous capture and batch polishing from a COG/g perspective. The multiattribute decision-making analysis highlighted that if the operational feasibility was considered more important than the economic benefits, the hybrid strategy would be preferred for all company scales. Further considerations outside the scope of this work include the process development costs required to adopt continuous processing. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 33:854-866, 2017. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers.

Integrated continuous bioprocessing: Economic, operational, and environmental feasibility for clinical and commercial antibody manufacture

PubMed Central

Pollock, James; Coffman, Jon; Ho, Sa V.

2017-01-01

This paper presents a systems approach to evaluating the potential of integrated continuous bioprocessing for monoclonal antibody (mAb) manufacture across a product's lifecycle from preclinical to commercial manufacture. The economic, operational, and environmental feasibility of alternative continuous manufacturing strategies were evaluated holistically using a prototype UCL decisional tool that integrated process economics, discrete‐event simulation, environmental impact analysis, operational risk analysis, and multiattribute decision‐making. The case study focused on comparing whole bioprocesses that used either batch, continuous or a hybrid combination of batch and continuous technologies for cell culture, capture chromatography, and polishing chromatography steps. The cost of goods per gram (COG/g), E‐factor, and operational risk scores of each strategy were established across a matrix of scenarios with differing combinations of clinical development phase and company portfolio size. The tool outputs predict that the optimal strategy for early phase production and small/medium‐sized companies is the integrated continuous strategy (alternating tangential flow filtration (ATF) perfusion, continuous capture, continuous polishing). However, the top ranking strategy changes for commercial production and companies with large portfolios to the hybrid strategy with fed‐batch culture, continuous capture and batch polishing from a COG/g perspective. The multiattribute decision‐making analysis highlighted that if the operational feasibility was considered more important than the economic benefits, the hybrid strategy would be preferred for all company scales. Further considerations outside the scope of this work include the process development costs required to adopt continuous processing. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 33:854–866, 2017 PMID:28480535

Optimizing conservation strategies for Mexican freetailed bats: a population viability and ecosystem services approach

USGS Publications Warehouse

Wiederholt, Ruscena; Lopez-Hoffman, Laura; Svancara, Colleen; McCracken, Gary; Thogmartin, Wayne E.; Diffendorfer, James E.; Mattson, Brady; Bagstad, Kenneth J.; Cryan, Paul; Russell, Amy; Semmens, Darius J.; Rodrigo A. Medellín,

2015-01-01

Conservation planning can be challenging due to the need to balance biological concerns about population viability with social concerns about the benefits biodiversity provide to society, often while operating under a limited budget. Methods and tools that help prioritize conservation actions are critical for the management of at-risk species. Here, we use a multi-attribute utility function to assess the optimal maternity roosts to conserve for maintaining the population viability and the ecosystem services of a single species, the Mexican free-tailed bat (Tadarida brasiliensis mexicana). Mexican free-tailed bats provide ecosystem services such as insect pest-suppression in agricultural areas and recreational viewing opportunities, and may be threatened by climate change and development of wind energy. We evaluated each roost based on five attributes: the maternity roost’s contribution to population viability, the pest suppression ecosystem services to the surrounding area provided by the bats residing in the roost, the ecotourism value of the roost, the risks posed to each roost structure, and the risks posed to the population of bats residing in each roost. We compared several scenarios that prioritized these attributes differently, hypothesizing that the set of roosts with the highest rankings would vary according to the conservation scenario. Our results indicate that placing higher values on different roost attributes (e.g. population importance over ecosystem service value) altered the roost rankings. We determined that the values placed on various conservation objectives are an important determinant of habitat planning.

Can Carbon Nanomaterials Improve CZTS Photovoltaic Devices? Evaluation of Performance and Impacts Using Integrated Life-Cycle Assessment and Decision Analysis.

PubMed

Scott, Ryan P; Cullen, Alison C; Fox-Lent, Cate; Linkov, Igor

2016-10-01

In emergent photovoltaics, nanoscale materials hold promise for optimizing device characteristics; however, the related impacts remain uncertain, resulting in challenges to decisions on strategic investment in technology innovation. We integrate multi-criteria decision analysis (MCDA) and life-cycle assessment (LCA) results (LCA-MCDA) as a method of incorporating values of a hypothetical federal acquisition manager into the assessment of risks and benefits of emerging photovoltaic materials. Specifically, we compare adoption of copper zinc tin sulfide (CZTS) devices with molybdenum back contacts to alternative devices employing graphite or graphene instead of molybdenum. LCA impact results are interpreted alongside benefits of substitution including cost reductions and performance improvements through application of multi-attribute utility theory. To assess the role of uncertainty we apply Monte Carlo simulation and sensitivity analysis. We find that graphene or graphite back contacts outperform molybdenum under most scenarios and assumptions. The use of decision analysis clarifies potential advantages of adopting graphite as a back contact while emphasizing the importance of mitigating conventional impacts of graphene production processes if graphene is used in emerging CZTS devices. Our research further demonstrates that a combination of LCA and MCDA increases the usability of LCA in assessing product sustainability. In particular, this approach identifies the most influential assumptions and data gaps in the analysis and the areas in which either engineering controls or further data collection may be necessary. © 2016 Society for Risk Analysis.

Prioritization of highway maintenance functions using multi-attribute decision making with fuzzy pairwise comparison.

DOT National Transportation Integrated Search

2011-09-01

"As is the case for most of the Departments of Transportation in the U.S., the Texas Department of : Transportation has been experiencing fluctuations of budget for maintaining and preserving its highway : infrastructure over the recent years. If the...

Texas Urban Triangle : pilot study to implement a spatial decision support system (SDSS) for sustainable mobility.

DOT National Transportation Integrated Search

2011-03-01

This project addressed sustainable transportation in the Texas Urban Triangle (TUT) by conducting a pilot : project at the county scale. The project tested and developed the multi-attribute Spatial Decision Support : System (SDSS) developed in 2009 u...

Multi-Attribute Task Battery - Applications in pilot workload and strategic behavior research

NASA Technical Reports Server (NTRS)

Arnegard, Ruth J.; Comstock, J. R., Jr.

1991-01-01

The Multi-Attribute Task (MAT) Battery provides a benchmark set of tasks for use in a wide range of lab studies of operator performance and workload. The battery incorporates tasks analogous to activities that aircraft crewmembers perform in flight, while providing a high degree of experimenter control, performance data on each subtask, and freedom to nonpilot test subjects. Features not found in existing computer based tasks include an auditory communication task (to simulate Air Traffic Control communication), a resource management task permitting many avenues or strategies of maintaining target performance, a scheduling window which gives the operator information about future task demands, and the option of manual or automated control of tasks. Performance data are generated for each subtask. In addition, the task battery may be paused and onscreen workload rating scales presented to the subject. The MAT Battery requires a desktop computer with color graphics. The communication task requires a serial link to a second desktop computer with a voice synthesizer or digitizer card.

The multi-attribute task battery for human operator workload and strategic behavior research

NASA Technical Reports Server (NTRS)

Comstock, J. Raymond, Jr.; Arnegard, Ruth J.

1992-01-01

The Multi-Attribute Task (MAT) Battery provides a benchmark set of tasks for use in a wide range of lab studies of operator performance and workload. The battery incorporates tasks analogous to activities that aircraft crewmembers perform in flight, while providing a high degree of experimenter control, performance data on each subtask, and freedom to use nonpilot test subjects. Features not found in existing computer based tasks include an auditory communication task (to simulate Air Traffic Control communication), a resource management task permitting many avenues or strategies of maintaining target performance, a scheduling window which gives the operator information about future task demands, and the option of manual or automated control of tasks. Performance data are generated for each subtask. In addition, the task battery may be paused and onscreen workload rating scales presented to the subject. The MAT Battery requires a desktop computer with color graphics. The communication task requires a serial link to a second desktop computer with a voice synthesizer or digitizer card.

Research on efficiency evaluation model of integrated energy system based on hybrid multi-attribute decision-making.

PubMed

Li, Yan

2017-05-25

The efficiency evaluation model of integrated energy system, involving many influencing factors, and the attribute values are heterogeneous and non-deterministic, usually cannot give specific numerical or accurate probability distribution characteristics, making the final evaluation result deviation. According to the characteristics of the integrated energy system, a hybrid multi-attribute decision-making model is constructed. The evaluation model considers the decision maker's risk preference. In the evaluation of the efficiency of the integrated energy system, the evaluation value of some evaluation indexes is linguistic value, or the evaluation value of the evaluation experts is not consistent. These reasons lead to ambiguity in the decision information, usually in the form of uncertain linguistic values and numerical interval values. In this paper, the risk preference of decision maker is considered when constructing the evaluation model. Interval-valued multiple-attribute decision-making method and fuzzy linguistic multiple-attribute decision-making model are proposed. Finally, the mathematical model of efficiency evaluation of integrated energy system is constructed.

Absolute order-of-magnitude reasoning applied to a social multi-criteria evaluation framework

NASA Astrophysics Data System (ADS)

Afsordegan, A.; Sánchez, M.; Agell, N.; Aguado, J. C.; Gamboa, G.

2016-03-01

A social multi-criteria evaluation framework for solving a real-case problem of selecting a wind farm location in the regions of Urgell and Conca de Barberá in Catalonia (northeast of Spain) is studied. This paper applies a qualitative multi-criteria decision analysis approach based on linguistic labels assessment able to address uncertainty and deal with different levels of precision. This method is based on qualitative reasoning as an artificial intelligence technique for assessing and ranking multi-attribute alternatives with linguistic labels in order to handle uncertainty. This method is suitable for problems in the social framework such as energy planning which require the construction of a dialogue process among many social actors with high level of complexity and uncertainty. The method is compared with an existing approach, which has been applied previously in the wind farm location problem. This approach, consisting of an outranking method, is based on Condorcet's original method. The results obtained by both approaches are analysed and their performance in the selection of the wind farm location is compared in aggregation procedures. Although results show that both methods conduct to similar alternatives rankings, the study highlights both their advantages and drawbacks.

Impact of Decision Criteria on Federal Aviation Administration Certification of Military Commercial Derivative Aircraft

DTIC Science & Technology

2012-03-01

Capt Low was a member of the Sigma Iota Epsilon professional management fraternity. He has performed as an on-equipment and off-equipment...FAA Certification, Military Commercial Derivative Aircraft, Multi-Attribute Decision Making 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF

Selecting the Best Thermal Building Insulation Using a Multi-Attribute Decision Model

DTIC Science & Technology

2008-03-01

materials which come in various forms. Rock wool, also called mineral wool , is made from natural minerals and was developed in the mid-1800s (NAIMA...2008). Fiberglass is a form of mineral wool and accounts for approximately 85% of the market for residential insulation. Synthetic insulating

Modeling recreation participants' willingness to substitute using multi-attribute indicators

Treesearch

Yung-Ping (Emilio) Tseng; Robert B. Ditton

2008-01-01

A logistic regression was used to predict anglers' resource-substitution decisions based on three dimensions of recreation specialization (behavior, skill and knowledge, and commitment), two dimensions of place attachment (place identity and place dependence), and three demographic indicators. Results indicated that place dependence was the most effective...

A methodology for the comparative evaluation of alternative bioseparation technologies.

PubMed

Tran, Richard; Zhou, Yuhong; Lacki, Karol M; Titchener-Hooker, Nigel J

2008-01-01

Advances in upstream technologies and growing commercial demand have led to cell culture processes of ever larger volumes and expressing at higher product titers. This has increased the burden on downstream processing. Concerns regarding the capacity limitations of packed-bed chromatography have led process engineers to begin investigating new bioseparation techniques that may be considered as "alternatives" to chromatography, and which could potentially offer higher processing capacities but at a lower cost. With the wide range of alternatives, which are currently available, each with their own strengths and inherent limitations, coupled with the time pressures associated with process development, the challenge for process engineers is to determine which technologies are most worth investigating. This article presents a methodology based on a multiattribute decision making (MADM) analysis approach, utilizing both quantitative and qualitative data, which can be used to determine the "industrial attractiveness" of bioseparation technologies, accounting for trade-offs between their strengths and weaknesses. By including packed-bed chromatography in the analysis as a reference point, it was possible to determine the alternatives, which show the most promise for use in large-scale manufacturing processes. The results of this analysis show that although the majority of alternative techniques offer certain advantages over conventional packed-bed chromatography, their attractiveness overall means that currently none of these technologies may be considered as viable alternatives to chromatography. The methodology introduced in this study may be used to gain significant quantitative insight as to the key areas in which improvements are required for each technique, and thus may be used as a tool to aid in further technological development.

Decision support framework for evaluating the operational environment of forest bioenergy production and use: Case of four European countries.

PubMed

Pezdevšek Malovrh, Špela; Kurttila, Mikko; Hujala, Teppo; Kärkkäinen, Leena; Leban, Vasja; Lindstad, Berit H; Peters, Dörte Marie; Rhodius, Regina; Solberg, Birger; Wirth, Kristina; Zadnik Stirn, Lidija; Krč, Janez

2016-09-15

Complex policy-making situations around bioenergy production and use require examination of the operational environment of the society and a participatory approach. This paper presents and demonstrates a three-phase decision-making framework for analysing the operational environment of strategies related to increased forest bioenergy targets. The framework is based on SWOT (strengths, weaknesses, opportunities and threats) analysis and the Simple Multi-Attribute Rating Technique (SMART). Stakeholders of four case countries (Finland, Germany, Norway and Slovenia) defined the factors that affect the operational environments, classified in four pre-set categories (Forest Characteristics and Management, Policy Framework, Technology and Science, and Consumers and Society). The stakeholders participated in weighting of SWOT items for two future scenarios with SMART technique. The first scenario reflected the current 2020 targets (the Business-as-Usual scenario), and the second scenario contained a further increase in the targets (the Increase scenario). This framework can be applied to various problems of environmental management and also to other fields where public decision-making is combined with stakeholders' engagement. The case results show that the greatest differences between the scenarios appear in Germany, indicating a notably negative outlook for the Increase scenario, while the smallest differences were found in Finland. Policy Framework was a highly rated category across the countries, mainly with respect to weaknesses and threats. Intensified forest bioenergy harvesting and utilization has potentially wide country-specific impacts which need to be anticipated and considered in national policies and public dialogue. Copyright © 2016 Elsevier Ltd. All rights reserved.

Preference Reversal in Multiattribute Choice

ERIC Educational Resources Information Center

Tsetsos, Konstantinos; Usher, Marius; Chater, Nick

2010-01-01

A central puzzle for theories of choice is that people's preferences between options can be reversed by the presence of decoy options (that are not chosen) or by the presence of other irrelevant options added to the choice set. Three types of reversal effect reported in the decision-making literature, the attraction, compromise, and similarity…

Postscript: Contrasting Predictions for Preference Reversal

ERIC Educational Resources Information Center

Usher, Marius; Tsetsos, Konstantinos; Chater, Nick

2010-01-01

In this post scrit, the authors discuss an article by Hotaling, Busemeyer, and Li which provided a valuable reply to the challenges the current authors raised for the decision field theory (DFT) account of preference reversal in multiattribute choice. They agree with Hotaling, Busemeyer, and Li's observation that with the addition of an internal…

Automatic Dance Lesson Generation

ERIC Educational Resources Information Center

Yang, Yang; Leung, H.; Yue, Lihua; Deng, LiQun

2012-01-01

In this paper, an automatic lesson generation system is presented which is suitable in a learning-by-mimicking scenario where the learning objects can be represented as multiattribute time series data. The dance is used as an example in this paper to illustrate the idea. Given a dance motion sequence as the input, the proposed lesson generation…

Attributions for School Achievement of Anglo and Native American Community College Students.

ERIC Educational Resources Information Center

Powers, Stephen; Rossman, Mark H.

Attributions for school success and failure were examined among 211 community college students (112 Native Americans and 99 Anglos) enrolled in remedial reading classes at a large, urban multi-campus community college system in the Southwest. The Multidimensional-Multiattributional Causality Scale (MMCS) was administered to the students in their…

Relative Saliency in Change Signals Affects Perceptual Comparison and Decision Processes in Change Detection

ERIC Educational Resources Information Center

Yang, Cheng-Ta

2011-01-01

Change detection requires perceptual comparison and decision processes on different features of multiattribute objects. How relative salience between two feature-changes influences the processes has not been addressed. This study used the systems factorial technology to investigate the processes when detecting changes in a Gabor patch with visual…

Toolbox or Adjustable Spanner? A Critical Comparison of Two Metaphors for Adaptive Decision Making

ERIC Educational Resources Information Center

Söllner, Anke; Bröder, Arndt

2016-01-01

For multiattribute decision tasks, different metaphors exist that describe the process of decision making and its adaptation to diverse problems and situations. Multiple strategy models (MSMs) assume that decision makers choose adaptively from a set of different strategies (toolbox metaphor), whereas evidence accumulation models (EAMs) hold that a…

Application of multiattribute decision-making methods for the determination of relative significance factor of impact categories.

PubMed

Noh, Jaesung; Lee, Kun Mo

2003-05-01

A relative significance factor (f(i)) of an impact category is the external weight of the impact category. The objective of this study is to propose a systematic and easy-to-use method for the determination of f(i). Multiattribute decision-making (MADM) methods including the analytical hierarchy process (AHP), the rank-order centroid method, and the fuzzy method were evaluated for this purpose. The results and practical aspects of using the three methods are compared. Each method shows the same trend, with minor differences in the value of f(i). Thus, all three methods can be applied to the determination of f(i). The rank order centroid method reduces the number of pairwise comparisons by placing the alternatives in order, although it has inherent weakness over the fuzzy method in expressing the degree of vagueness associated with assigning weights to criteria and alternatives. The rank order centroid method is considered a practical method for the determination of f(i) because it is easier and simpler to use compared to the AHP and the fuzzy method.

Feature extraction based on extended multi-attribute profiles and sparse autoencoder for remote sensing image classification

NASA Astrophysics Data System (ADS)

Teffahi, Hanane; Yao, Hongxun; Belabid, Nasreddine; Chaib, Souleyman

2018-02-01

The satellite images with very high spatial resolution have been recently widely used in image classification topic as it has become challenging task in remote sensing field. Due to a number of limitations such as the redundancy of features and the high dimensionality of the data, different classification methods have been proposed for remote sensing images classification particularly the methods using feature extraction techniques. This paper propose a simple efficient method exploiting the capability of extended multi-attribute profiles (EMAP) with sparse autoencoder (SAE) for remote sensing image classification. The proposed method is used to classify various remote sensing datasets including hyperspectral and multispectral images by extracting spatial and spectral features based on the combination of EMAP and SAE by linking them to kernel support vector machine (SVM) for classification. Experiments on new hyperspectral image "Huston data" and multispectral image "Washington DC data" shows that this new scheme can achieve better performance of feature learning than the primitive features, traditional classifiers and ordinary autoencoder and has huge potential to achieve higher accuracy for classification in short running time.

A colored petri nets based workload evaluation model and its validation through Multi-Attribute Task Battery-II.

PubMed

Wang, Peng; Fang, Weining; Guo, Beiyuan

2017-04-01

This paper proposed a colored petri nets based workload evaluation model. A formal interpretation of workload was firstly introduced based on the process that reflection of petri nets components to task. A petri net based description of Multiple Resources theory was given by comprehending it from a new angle. A new application of VACP rating scales named V/A-C-P unit, and the definition of colored transitions were proposed to build a model of task process. The calculation of workload mainly has the following four steps: determine token's initial position and values; calculate the weight of directed arcs on the basis of the rules proposed; calculate workload from different transitions, and correct the influence of repetitive behaviors. Verify experiments were carried out based on Multi-Attribute Task Battery-II software. Our results show that there is a strong correlation between the model values and NASA -Task Load Index scores (r=0.9513). In addition, this method can also distinguish behavior characteristics between different people. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sustainability assessment of tertiary wastewater treatment technologies: a multi-criteria analysis.

PubMed

Plakas, K V; Georgiadis, A A; Karabelas, A J

2016-01-01

The multi-criteria analysis gives the opportunity to researchers, designers and decision-makers to examine decision options in a multi-dimensional fashion. On this basis, four tertiary wastewater treatment (WWT) technologies were assessed regarding their sustainability performance in producing recycled wastewater, considering a 'triple bottom line' approach (i.e. economic, environmental, and social). These are powdered activated carbon adsorption coupled with ultrafiltration membrane separation (PAC-UF), reverse osmosis, ozone/ultraviolet-light oxidation and heterogeneous photo-catalysis coupled with low-pressure membrane separation (photocatalytic membrane reactor, PMR). The participatory method called simple multi-attribute rating technique exploiting ranks was employed for assigning weights to selected sustainability indicators. This sustainability assessment approach resulted in the development of a composite index as a final metric, for each WWT technology evaluated. The PAC-UF technology appears to be the most appropriate technology, attaining the highest composite value regarding the sustainability performance. A scenario analysis confirmed the results of the original scenario in five out of seven cases. In parallel, the PMR was highlighted as the technology with the least variability in its performance. Nevertheless, additional actions and approaches are proposed to strengthen the objectivity of the final results.

Decision-theoretic methodology for reliability and risk allocation in nuclear power plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cho, N.Z.; Papazoglou, I.A.; Bari, R.A.

1985-01-01

This paper describes a methodology for allocating reliability and risk to various reactor systems, subsystems, components, operations, and structures in a consistent manner, based on a set of global safety criteria which are not rigid. The problem is formulated as a multiattribute decision analysis paradigm; the multiobjective optimization, which is performed on a PRA model and reliability cost functions, serves as the guiding principle for reliability and risk allocation. The concept of noninferiority is used in the multiobjective optimization problem. Finding the noninferior solution set is the main theme of the current approach. The assessment of the decision maker's preferencesmore » could then be performed more easily on the noninferior solution set. Some results of the methodology applications to a nontrivial risk model are provided and several outstanding issues such as generic allocation and preference assessment are discussed.« less

An interval-valued 2-tuple linguistic group decision-making model based on the Choquet integral operator

NASA Astrophysics Data System (ADS)

Liu, Bingsheng; Fu, Meiqing; Zhang, Shuibo; Xue, Bin; Zhou, Qi; Zhang, Shiruo

2018-01-01

The Choquet integral (IL) operator is an effective approach for handling interdependence among decision attributes in complex decision-making problems. However, the fuzzy measures of attributes and attribute sets required by IL are difficult to achieve directly, which limits the application of IL. This paper proposes a new method for determining fuzzy measures of attributes by extending Marichal's concept of entropy for fuzzy measure. To well represent the assessment information, interval-valued 2-tuple linguistic context is utilised to represent information. Then, we propose a Choquet integral operator in an interval-valued 2-tuple linguistic environment, which can effectively handle the correlation between attributes. In addition, we apply these methods to solve multi-attribute group decision-making problems. The feasibility and validity of the proposed operator is demonstrated by comparisons with other models in illustrative example part.

Putting Short-Term Memory into Context: Reply to Usher, Davelaar, Haarmann, and Goshen-Gottstein (2008)

ERIC Educational Resources Information Center

Kahana, Michael J.; Sederberg, Per B.; Howard, Marc W.

2008-01-01

The temporal context model posits that search through episodic memory is driven by associations between the multiattribute representations of items and context. Context, in turn, is a recency weighted sum of previous experiences or memories. Because recently processed items are most similar to the current representation of context, M. Usher, E. J.…

Using Consumer Behavior and Decision Models to Aid Students in Choosing a Major.

ERIC Educational Resources Information Center

Kaynama, Shohreh A.; Smith, Louise W.

1996-01-01

A study found that using consumer behavior and decision models to guide students to a major can be useful and enjoyable for students. Students consider many of the basic parameters through multi-attribute and decision-analysis models, so time with professors, who were found to be the most influential group, can be used for more individual and…

Gender Differences in Multiattributional Causality for Achievement and Affiliation in Five Cross-National Samples.

ERIC Educational Resources Information Center

Chandler, Theodore A.; And Others

The purpose of this study was to expand the previous limited locus of control focus of gender differences cross-nationally by shifting to an attributional model for both successes and failures in both achievement and affiliation domains in order to test the hypothesis that women differ from men in their attributional patterns for achievement and…

Prioritizing conservation seed banking locations for imperiled hemlock species using multi-attribute frontier mapping

Treesearch

John M. Hastings; Kevin M. Potter; Frank H. Koch; Mark Megalos; Robert M. Jetton

2017-01-01

Hemlock woolly adelgid (Adelges tsugae Annand) (HWA) is an invasive forest insect sweeping across the native range of eastern (Tsuga canadensis [L.] Carr.) and Carolina (Tsuga caroliniana Engelm.) hemlocks, threatening to severely reduce eastern hemlock extent and to push Carolina hemlock to extirpation. HWA poses a significant threat to these eastern US natives, now...

Perceptual grouping does not affect multi-attribute decision making if no processing costs are involved.

PubMed

Ettlin, Florence; Bröder, Arndt

2015-05-01

Adaptive strategy selection implies that a decision strategy is chosen based on its fit to the task and situation. However, other aspects, such as the way information is presented, can determine information search behavior; especially when the application of certain strategies over others is facilitated. But are such display effects on multi-attribute decisions also at work when the manipulation does not entail differential costs for different decision strategies? Three Mouselab experiments with hidden information and one eye tracking experiment with an open information board revealed that decision behavior is unaffected by purely perceptual manipulations of the display based on Gestalt principles; that is, based on manipulations that induce no noteworthy processing costs for different information search patterns. We discuss our results in the context of previous findings on display effects; specifically, how the combination of these findings and our results reveal the crucial role of differential processing costs for different strategies for the emergence of display effects. This finding describes a boundary condition of the commonly acknowledged influence of information displays and is in line with the ideas of adaptive strategy selection and cost-benefit tradeoffs. Copyright © 2015. Published by Elsevier B.V.

A Multi-Attribute Pheromone Ant Secure Routing Algorithm Based on Reputation Value for Sensor Networks

PubMed Central

Zhang, Lin; Yin, Na; Fu, Xiong; Lin, Qiaomin; Wang, Ruchuan

2017-01-01

With the development of wireless sensor networks, certain network problems have become more prominent, such as limited node resources, low data transmission security, and short network life cycles. To solve these problems effectively, it is important to design an efficient and trusted secure routing algorithm for wireless sensor networks. Traditional ant-colony optimization algorithms exhibit only local convergence, without considering the residual energy of the nodes and many other problems. This paper introduces a multi-attribute pheromone ant secure routing algorithm based on reputation value (MPASR). This algorithm can reduce the energy consumption of a network and improve the reliability of the nodes’ reputations by filtering nodes with higher coincidence rates and improving the method used to update the nodes’ communication behaviors. At the same time, the node reputation value, the residual node energy and the transmission delay are combined to formulate a synthetic pheromone that is used in the formula for calculating the random proportion rule in traditional ant-colony optimization to select the optimal data transmission path. Simulation results show that the improved algorithm can increase both the security of data transmission and the quality of routing service. PMID:28282894

A visual analysis of multi-attribute data using pixel matrix displays

NASA Astrophysics Data System (ADS)

Hao, Ming C.; Dayal, Umeshwar; Keim, Daniel; Schreck, Tobias

2007-01-01

Charts and tables are commonly used to visually analyze data. These graphics are simple and easy to understand, but charts show only highly aggregated data and present only a limited number of data values while tables often show too many data values. As a consequence, these graphics may either lose or obscure important information, so different techniques are required to monitor complex datasets. Users need more powerful visualization techniques to digest and compare detailed multi-attribute data to analyze the health of their business. This paper proposes an innovative solution based on the use of pixel-matrix displays to represent transaction-level information. With pixelmatrices, users can visualize areas of importance at a glance, a capability not provided by common charting techniques. We present our solutions to use colored pixel-matrices in (1) charts for visualizing data patterns and discovering exceptions, (2) tables for visualizing correlations and finding root-causes, and (3) time series for visualizing the evolution of long-running transactions. The solutions have been applied with success to product sales, Internet network performance analysis, and service contract applications demonstrating the benefits of our method over conventional graphics. The method is especially useful when detailed information is a key part of the analysis.

Detecting Hotspot Information Using Multi-Attribute Based Topic Model

PubMed Central

Wang, Jing; Li, Li; Tan, Feng; Zhu, Ying; Feng, Weisi

2015-01-01

Microblogging as a kind of social network has become more and more important in our daily lives. Enormous amounts of information are produced and shared on a daily basis. Detecting hot topics in the mountains of information can help people get to the essential information more quickly. However, due to short and sparse features, a large number of meaningless tweets and other characteristics of microblogs, traditional topic detection methods are often ineffective in detecting hot topics. In this paper, we propose a new topic model named multi-attribute latent dirichlet allocation (MA-LDA), in which the time and hashtag attributes of microblogs are incorporated into LDA model. By introducing time attribute, MA-LDA model can decide whether a word should appear in hot topics or not. Meanwhile, compared with the traditional LDA model, applying hashtag attribute in MA-LDA model gives the core words an artificially high ranking in results meaning the expressiveness of outcomes can be improved. Empirical evaluations on real data sets demonstrate that our method is able to detect hot topics more accurately and efficiently compared with several baselines. Our method provides strong evidence of the importance of the temporal factor in extracting hot topics. PMID:26496635

Propulsion Airframe Aeroacoustics Technology Evaluation and Selection Using a Multi-Attribute Decision Making Process and Non-Deterministic Design

NASA Technical Reports Server (NTRS)

Burg, Cecile M.; Hill, Geoffrey A.; Brown, Sherilyn A.; Geiselhart, Karl A.

2004-01-01

The Systems Analysis Branch at NASA Langley Research Center has investigated revolutionary Propulsion Airframe Aeroacoustics (PAA) technologies and configurations for a Blended-Wing-Body (BWB) type aircraft as part of its research for NASA s Quiet Aircraft Technology (QAT) Project. Within the context of the long-term NASA goal of reducing the perceived aircraft noise level by a factor of 4 relative to 1997 state of the art, major configuration changes in the propulsion airframe integration system were explored with noise as a primary design consideration. An initial down-select and assessment of candidate PAA technologies for the BWB was performed using a Multi-Attribute Decision Making (MADM) process consisting of organized brainstorming and decision-making tools. The assessments focused on what effect the PAA technologies had on both the overall noise level of the BWB and what effect they had on other major design considerations such as weight, performance and cost. A probabilistic systems analysis of the PAA configurations that presented the best noise reductions with the least negative impact on the system was then performed. Detailed results from the MADM study and the probabilistic systems analysis will be published in the near future.

Bayesian outcome-based strategy classification.

PubMed

Lee, Michael D

2016-03-01

Hilbig and Moshagen (Psychonomic Bulletin & Review, 21, 1431-1443, 2014) recently developed a method for making inferences about the decision processes people use in multi-attribute forced choice tasks. Their paper makes a number of worthwhile theoretical and methodological contributions. Theoretically, they provide an insightful psychological motivation for a probabilistic extension of the widely-used "weighted additive" (WADD) model, and show how this model, as well as other important models like "take-the-best" (TTB), can and should be expressed in terms of meaningful priors. Methodologically, they develop an inference approach based on the Minimum Description Length (MDL) principles that balances both the goodness-of-fit and complexity of the decision models they consider. This paper aims to preserve these useful contributions, but provide a complementary Bayesian approach with some theoretical and methodological advantages. We develop a simple graphical model, implemented in JAGS, that allows for fully Bayesian inferences about which models people use to make decisions. To demonstrate the Bayesian approach, we apply it to the models and data considered by Hilbig and Moshagen (Psychonomic Bulletin & Review, 21, 1431-1443, 2014), showing how a prior predictive analysis of the models, and posterior inferences about which models people use and the parameter settings at which they use them, can contribute to our understanding of human decision making.

Using Incentives to Align Individual Choice with Organiztional Objectives

DTIC Science & Technology

2009-10-01

International Personality Item Pool – facet level items - Subject pool » University Students – 1st generation college – 18-24 years old, smaller sample 30... Services , Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Respondents should be...organizational objectives • 4 sets of experiments - Multi-attribute Auction » Precursor to Assignment Incentive Pay (AIP) - Cafeteria Style

Coding Theory Information Theory and Radar

DTIC Science & Technology

2005-01-01

the design and synthesis of artificial multiagent systems and for the understanding of human decision-making processes. This... altruism that may exist in a complex society. SGT derives its ability to account simultaneously for both group and individual interests from the structure of ...satisficing decision theory as a model of human decision mak- ing. 2 Multi-Attribute Decision Making Many decision problems involve the consideration of

A Multi-Attribute Assessment of Site Preparation Effects on the Socioeconomical and Ecological Attributes of Loblolly Pine (Pinus taeda) Stands

Treesearch

James H. Miller; Jianbang Gan; Stephen H. Kolison; Robert S. Boyd; Kenneth L. McNabb; B. Graeme Lockaby

1998-01-01

The public demands both commodity and non-commodity goods and srvices from our forests. This requires management options that not only provide fiber, clean water, wildlife habitat, and mcreation, but do so in a biologically sustainable manner, resulting in healthy productive forests into perpetuity. A common forest management activity used to enhance fiber production...

The conceptual foundation of environmental decision support.

PubMed

Reichert, Peter; Langhans, Simone D; Lienert, Judit; Schuwirth, Nele

2015-05-01

Environmental decision support intends to use the best available scientific knowledge to help decision makers find and evaluate management alternatives. The goal of this process is to achieve the best fulfillment of societal objectives. This requires a careful analysis of (i) how scientific knowledge can be represented and quantified, (ii) how societal preferences can be described and elicited, and (iii) how these concepts can best be used to support communication with authorities, politicians, and the public in environmental management. The goal of this paper is to discuss key requirements for a conceptual framework to address these issues and to suggest how these can best be met. We argue that a combination of probability theory and scenario planning with multi-attribute utility theory fulfills these requirements, and discuss adaptations and extensions of these theories to improve their application for supporting environmental decision making. With respect to (i) we suggest the use of intersubjective probabilities, if required extended to imprecise probabilities, to describe the current state of scientific knowledge. To address (ii), we emphasize the importance of value functions, in addition to utilities, to support decisions under risk. We discuss the need for testing "non-standard" value aggregation techniques, the usefulness of flexibility of value functions regarding attribute data availability, the elicitation of value functions for sub-objectives from experts, and the consideration of uncertainty in value and utility elicitation. With respect to (iii), we outline a well-structured procedure for transparent environmental decision support that is based on a clear separation of scientific prediction and societal valuation. We illustrate aspects of the suggested methodology by its application to river management in general and with a small, didactical case study on spatial river rehabilitation prioritization. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Patient and Societal Value Functions for the Testing Morbidities Index

PubMed Central

Swan, John Shannon; Kong, Chung Yin; Lee, Janie M.; Akinyemi, Omosalewa; Halpern, Elkan F.; Lee, Pablo; Vavinskiy, Sergey; Williams, Olubunmi; Zoltick, Emilie S.; Donelan, Karen

2013-01-01

Background We developed preference-based and summated scale scoring for the Testing Morbidities Index (TMI) classification, which addresses short-term effects on quality of life from diagnostic testing before, during and after a testing procedure. Methods The two TMI value functions utilize multiattribute value techniques; one is patient-based and the other has a societal perspective. 206 breast biopsy patients and 466 (societal) subjects informed the models. Due to a lack of standard short-term methods for this application, we utilized the visual analog scale (VAS). Waiting trade-off (WTO) tolls provided an additional option for linear transformation of the TMI. We randomized participants to one of three surveys: the first derived weights for generic testing morbidity attributes and levels of severity with the VAS; a second developed VAS values and WTO tolls for linear transformation of the TMI to a death-healthy scale; the third addressed initial validation in a specific test (breast biopsy). 188 patients and 425 community subjects participated in initial validation, comparing direct VAS and WTO values to the TMI. Alternative TMI scoring as a non-preference summated scale was included, given evidence of construct and content validity. Results The patient model can use an additive function, while the societal model is multiplicative. Direct VAS and the VAS-scaled TMI were correlated across modeling groups (r=0.45 to 0.62) and agreement was comparable to the value function validation of the Health Utilities Index 2. Mean Absolute Difference (MAD) calculations showed a range of 0.07–0.10 in patients and 0.11–0.17 in subjects. MAD for direct WTO tolls compared to the WTO-scaled TMI varied closely around one quality-adjusted life day. Conclusions The TMI shows initial promise in measuring short-term testing-related health states. PMID:23689044

Systems modeling and analysis for Saudi Arabian electric power requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al-Mohawes, N.A.

This thesis addresses the long-range generation planning problem in Saudi Arabia up to the year 2000. The first part presents various models for electric energy consumption in the residential and industrial sectors. These models can be used by the decision makers for the purposes of policy analysis, evaluation, and forecasting. Forecasts of energy in each sector are obtained from two different models for each sector. These models are based on two forecasting techniques: (1) Hybrid econometric/time series model. The idea of adaptive smoothing was utilized to produce forecasts under several scenarios. (2) Box-Jenkins time series technique. Box-Jenkins models and forecastsmore » are developed for the monthly number of electric consumers and the monthly energy consumption per consumer. The results obtained indicate that high energy consumption is expected during the coming two decades which necessitate serious energy assessment and optimization. Optimization of a mix of energy sources was considered using the group multiattribute utility (MAU) function. The results of MAU for three classes of decision makers (managerial, technical, and consumers) are developed through personal interactions. The computer package WASP was also used to develop a tentative optimum plan. According to this plan, four heavy-water nuclear power plants (800 MW) and four light-water nuclear power plants (1200 MW) have to be introduced by the year 2000 in addition to sixteen oil-fired power plants (400 MW) and nine gas turbines (100 MW).« less

Robust Sensitivity Analysis for Multi-Attribute Deterministic Hierarchical Value Models

DTIC Science & Technology

2002-03-01

such as weighted sum method, weighted 5 product method, and the Analytic Hierarchy Process ( AHP ). This research focuses on only weighted sum...different groups. They can be termed as deterministic, stochastic, or fuzzy multi-objective decision methods if they are classified according to the...weighted product model (WPM), and analytic hierarchy process ( AHP ). His method attempts to identify the most important criteria weight and the most

MANCaLog: A Logic for Multi-Attribute Network Cascades

DTIC Science & Technology

2013-01-01

influence function , whose precise effects will be described later on when we discuss the semantics. As a result, a rule consists of four major parts...i) an influence function , (ii) neighbor criteria, (iii) target criteria, and (iv) a target. Intuitively, (i) specifies how the neighbors influence the...in terms of these elements. First, we define influence functions and neighbor criteria. Definition 2.6 ( Influence Function ). An influence function is a

Bidding Behavior in a Multi-attribute First-price Auction

DTIC Science & Technology

2010-01-01

of applying key features of the multi-unit auction to proxy buyer /seller marginal valuations of the attributes of a job. Two experiments were...compensation package show promise in ascertaining buyer /seller marginal valuations of a job. This research effort was supported by a grant from the...auctions observed in the goods market, as measured by maximizing consumer and producer surplus, are likely to have promising applications to labor markets

Geographic Profiling: Knowledge Through Prediction

DTIC Science & Technology

2014-06-01

FTO Foreign Terrorist Organization GIS geographic information systems LE lawless elements MADM multi-attribute decision making MILF Moro Islamic...or her life. Anchor points can include the offender’s home , his or her workplace, a home of a friend of the offender, or even a bar or restaurant...more generally for the improvement of police patrols. In Memphis, TN, city officials have seen a decrease in crime with the help of operation Blue

Overall Performance Evaluation of Tubular Scraper Conveyors Using a TOPSIS-Based Multiattribute Decision-Making Method

PubMed Central

Yao, Yanping; Kou, Ziming; Meng, Wenjun; Han, Gang

2014-01-01

Properly evaluating the overall performance of tubular scraper conveyors (TSCs) can increase their overall efficiency and reduce economic investments, but such methods have rarely been studied. This study evaluated the overall performance of TSCs based on the technique for order of preference by similarity to ideal solution (TOPSIS). Three conveyors of the same type produced in the same factory were investigated. Their scraper space, material filling coefficient, and vibration coefficient of the traction components were evaluated. A mathematical model of the multiattribute decision matrix was constructed; a weighted judgment matrix was obtained using the DELPHI method. The linguistic positive-ideal solution (LPIS), the linguistic negative-ideal solution (LNIS), and the distance from each solution to the LPIS and the LNIS, that is, the approximation degrees, were calculated. The optimal solution was determined by ordering the approximation degrees for each solution. The TOPSIS-based results were compared with the measurement results provided by the manufacturer. The ordering result based on the three evaluated parameters was highly consistent with the result provided by the manufacturer. The TOPSIS-based method serves as a suitable evaluation tool for the overall performance of TSCs. It facilitates the optimal deployment of TSCs for industrial purposes. PMID:24991646

Regulating Emotions during Difficult Multiattribute Decision Making: The Role of Pre-Decisional Coherence Shifting.

PubMed

Carpenter, Stephanie M; Yates, J Frank; Preston, Stephanie D; Chen, Lydia

2016-01-01

Almost all real-life decisions entail attribute conflict; every serious choice alternative is better than its competitors on some attribute dimensions but worse on others. In pre-decisional "coherence shifting," the decision maker gradually softens that conflict psychologically to the point where one alternative is seen as dominant over its competitors, or nearly so. Specifically, weaknesses of the eventually chosen alternative come to be perceived as less severe and less important while its strengths seem more desirable and significant. The research described here demonstrates that difficult multiattribute decision problems are aversive and that pre-decisional coherence shifting aids individuals in regulating that emotional discomfort. Across three studies, attribute conflict was confirmed to be aversive (Study 1), and skin conductance responses and ratings of decision difficulty both decreased in participants who coherence shifted (Study 2). Coherence shifting was also diminished among decision makers who were depleted of regulatory resources, known to be required for common emotion regulation mechanisms. Further, coherence shifting was shown to be relatively common among people who reported strong suppression tendencies in everyday emotion regulation (Study 3). Overall, the data suggest that, at least in part, coherence shifting serves as a tool that helps decision makers manage the pre-decisional discomfort generated by attribute conflict. Theoretical and practical implications are discussed.

Regulating Emotions during Difficult Multiattribute Decision Making: The Role of Pre-Decisional Coherence Shifting

PubMed Central

Carpenter, Stephanie M.; Yates, J. Frank; Preston, Stephanie D.; Chen, Lydia

2016-01-01

Almost all real-life decisions entail attribute conflict; every serious choice alternative is better than its competitors on some attribute dimensions but worse on others. In pre-decisional “coherence shifting,” the decision maker gradually softens that conflict psychologically to the point where one alternative is seen as dominant over its competitors, or nearly so. Specifically, weaknesses of the eventually chosen alternative come to be perceived as less severe and less important while its strengths seem more desirable and significant. The research described here demonstrates that difficult multiattribute decision problems are aversive and that pre-decisional coherence shifting aids individuals in regulating that emotional discomfort. Across three studies, attribute conflict was confirmed to be aversive (Study 1), and skin conductance responses and ratings of decision difficulty both decreased in participants who coherence shifted (Study 2). Coherence shifting was also diminished among decision makers who were depleted of regulatory resources, known to be required for common emotion regulation mechanisms. Further, coherence shifting was shown to be relatively common among people who reported strong suppression tendencies in everyday emotion regulation (Study 3). Overall, the data suggest that, at least in part, coherence shifting serves as a tool that helps decision makers manage the pre-decisional discomfort generated by attribute conflict. Theoretical and practical implications are discussed. PMID:26986752

Multiattribute evaluation of regional cotton variety trials.

PubMed

Basford, K E; Kroonenberg, P M; Delacy, I H; Lawrence, P K

1990-02-01

The Australian Cotton Cultivar Trials (ACCT) are designed to investigate various cotton [Gossypium hirsutum (L.)] lines in several locations in New South Wales and Queensland each year. If these lines are to be assessed by the simultaneous use of yield and lint quality data, then a multivariate technique applicable to three-way data is desirable. Two such techniques, the mixture maximum likelihood method of clustering and three-mode principal component analysis, are described and used to analyze these data. Applied together, the methods enhance each other's usefulness in interpreting the information on the line response patterns across the locations. The methods provide a good integration of the responses across environments of the entries for the different attributes in the trials. For instance, using yield as the sole criterion, the excellence of the namcala and coker group for quality is overlooked. The analyses point to a decision in favor of either high yields of moderate to good quality lint or moderate yield but superior lint quality. The decisions indicated by the methods confirmed the selections made by the plant breeders. The procedures provide a less subjective, relatively easy to apply and interpret analytical method of describing the patterns of performance and associations in complex multiattribute and multilocation trials. This should lead to more efficient selection among lines in such trials.

Multi-agent framework for negotiation in a closed environment

NASA Astrophysics Data System (ADS)

Cretan, Adina; Coutinho, Carlos; Bratu, Ben; Jardim-Goncalves, Ricardo

2013-10-01

The goal of this paper is to offer support for small and medium enterprises which cannot or do not want to fulfill a big contract alone. Each organization has limited resources and in order to better accomplish a higher external demand, the managers are forced to outsource parts of their contracts even to concurrent organizations. In this concurrent environment each enterprise wants to preserve its decision autonomy and to disclose as little as possible from its business information. To describe this interaction, our approach is to define a framework for managing parallel and concurrent negotiations among independent organizations acting in the same industrial market. The complexity of our negotiation framework is done by the dynamic environment in which multi-attribute and multi-participant negotiations are racing over the same set of resources. Moreover, the proposed framework helps the organizations within the collaborative networked environment to augment their efficiency and ability to react to unforeseen situations, thus improving their market competitiveness.

Relative saliency in change signals affects perceptual comparison and decision processes in change detection.

PubMed

Yang, Cheng-Ta

2011-12-01

Change detection requires perceptual comparison and decision processes on different features of multiattribute objects. How relative salience between two feature-changes influences the processes has not been addressed. This study used the systems factorial technology to investigate the processes when detecting changes in a Gabor patch with visual inputs from orientation and spatial frequency channels. Two feature-changes were equally salient in Experiment 1, but a frequency-change was more salient than an orientation-change in Experiment 2. Results showed that all four observers adopted parallel self-terminating processing with limited- to unlimited-capacity processing in Experiment 1. In Experiment 2, one observer used parallel self-terminating processing with unlimited-capacity processing, and the others adopted serial self-terminating processing with limited- to unlimited-capacity processing to detect changes. Postexperimental interview revealed that subjective utility of feature information underlay the adoption of a decision strategy. These results highlight that observers alter decision strategies in change detection depending on the relative saliency in change signals, with relative saliency being determined by both physical salience and subjective weight of feature information. When relative salience exists, individual differences in the process characteristics emerge.

Use of Influenza Risk Assessment Tool for Prepandemic Preparedness

PubMed Central

Trock, Susan C.

2018-01-01

In 2010, the Centers for Disease Control and Prevention began to develop an Influenza Risk Assessment Tool (IRAT) to methodically capture and assess information relating to influenza A viruses not currently circulating among humans. The IRAT uses a multiattribute, additive model to generate a summary risk score for each virus. Although the IRAT is not intended to predict the next pandemic influenza A virus, it has provided input into prepandemic preparedness decisions. PMID:29460739

Strategic Planning in Population Health and Public Health Practice: A Call to Action for Higher Education

PubMed Central

PHELPS, CHARLES; RAPPUOLI, RINO; LEVIN, SCOTT; SHORTLIFFE, EDWARD; COLWELL, RITA

2016-01-01

Policy Points: Scarce resources, especially in population health and public health practice, underlie the importance of strategic planning.Public health agencies’ current planning and priority setting efforts are often narrow, at times opaque, and focused on single metrics such as cost‐effectiveness.As demonstrated by SMART Vaccines, a decision support software system developed by the Institute of Medicine and the National Academy of Engineering, new approaches to strategic planning allow the formal incorporation of multiple stakeholder views and multicriteria decision making that surpass even those sophisticated cost‐effectiveness analyses widely recommended and used for public health planning.Institutions of higher education can and should respond by building on modern strategic planning tools as they teach their students how to improve population health and public health practice. Context Strategic planning in population health and public health practice often uses single indicators of success or, when using multiple indicators, provides no mechanism for coherently combining the assessments. Cost‐effectiveness analysis, the most complex strategic planning tool commonly applied in public health, uses only a single metric to evaluate programmatic choices, even though other factors often influence actual decisions. Methods Our work employed a multicriteria systems analysis approach—specifically, multiattribute utility theory—to assist in strategic planning and priority setting in a particular area of health care (vaccines), thereby moving beyond the traditional cost‐effectiveness analysis approach. Findings (1) Multicriteria systems analysis provides more flexibility, transparency, and clarity in decision support for public health issues compared with cost‐effectiveness analysis. (2) More sophisticated systems‐level analyses will become increasingly important to public health as disease burdens increase and the resources to deal with them become scarcer. Conclusions The teaching of strategic planning in public health must be expanded in order to fill a void in the profession's planning capabilities. Public health training should actively incorporate model building, promote the interactive use of software tools, and explore planning approaches that transcend restrictive assumptions of cost‐effectiveness analysis. The Strategic Multi‐Attribute Ranking Tool for Vaccines (SMART Vaccines), which was recently developed by the Institute of Medicine and the National Academy of Engineering to help prioritize new vaccine development, is a working example of systems analysis as a basis for decision support. PMID:26994711

Identification of Low-Latency Obfuscated Traffic Using Multi-Attribute Analysis

DTIC Science & Technology

2017-03-01

the distribution of common Tor packet sizes. Herrmann et al. also contend that the remaining variations in observed packet sizes are caused by OS...specific fragmentation and that Tor’s variation in packet size provides an additional level of protection as the false positive rate (FPR) using packet...three pre-filter variations , the observed FPR for non-Tor ranged from 94.4 percent to 7.2 percent, and the observed FNR for Tor ranged from 61.3

Unchained Melody: Revisiting the Estimation of SF-6D Values

PubMed Central

Craig, Benjamin M.

2015-01-01

Purpose In the original SF-6D valuation study, the analytical design inherited conventions that detrimentally affected its ability to predict values on a quality-adjusted life year (QALY) scale. Our objective is to estimate UK values for SF-6D states using the original data and multi-attribute utility (MAU) regression after addressing its limitations and to compare the revised SF-6D and EQ-5D value predictions. Methods Using the unaltered data (611 respondents, 3503 SG responses), the parameters of the original MAU model were re-estimated under 3 alternative error specifications, known as the instant, episodic, and angular random utility models. Value predictions on a QALY scale were compared to EQ-5D3L predictions using the 1996 Health Survey for England. Results Contrary to the original results, the revised SF-6D value predictions range below 0 QALYs (i.e., worse than death) and agree largely with EQ-5D predictions after adjusting for scale. Although a QALY is defined as a year in optimal health, the SF-6D sets a higher standard for optimal health than the EQ-5D-3L; therefore, it has larger units on a QALY scale by construction (20.9% more). Conclusions Much of the debate in health valuation has focused on differences between preference elicitation tasks, sampling, and instruments. After correcting errant econometric practices and adjusting for differences in QALY scale between the EQ-5D and SF-6D values, the revised predictions demonstrate convergent validity, making them more suitable for UK economic evaluations compared to original estimates. PMID:26359242

MAT - MULTI-ATTRIBUTE TASK BATTERY FOR HUMAN OPERATOR WORKLOAD AND STRATEGIC BEHAVIOR RESEARCH

NASA Technical Reports Server (NTRS)

Comstock, J. R.

1994-01-01

MAT, a Multi-Attribute Task battery, gives the researcher the capability of performing multi-task workload and performance experiments. The battery provides a benchmark set of tasks for use in a wide range of laboratory studies of operator performance and workload. MAT incorporates tasks analogous to activities that aircraft crew members perform in flight, while providing a high degree of experiment control, performance data on each subtask, and freedom to use non-pilot test subjects. The MAT battery primary display is composed of four separate task windows which are as follows: a monitoring task window which includes gauges and warning lights, a tracking task window for the demands of manual control, a communication task window to simulate air traffic control communications, and a resource management task window which permits maintaining target levels on a fuel management task. In addition, a scheduling task window gives the researcher information about future task demands. The battery also provides the option of manual or automated control of tasks. The task generates performance data for each subtask. The task battery may be paused and onscreen workload rating scales presented to the subject. The MAT battery was designed to use a serially linked second computer to generate the voice messages for the Communications task. The MATREMX program and support files, which are included in the MAT package, were designed to work with the Heath Voice Card (Model HV-2000, available through the Heath Company, Benton Harbor, Michigan 49022); however, the MATREMX program and support files may easily be modified to work with other voice synthesizer or digitizer cards. The MAT battery task computer may also be used independent of the voice computer if no computer synthesized voice messages are desired or if some other method of presenting auditory messages is devised. MAT is written in QuickBasic and assembly language for IBM PC series and compatible computers running MS-DOS. The code in MAT is written for Microsoft QuickBasic 4.5 and Microsoft Macro Assembler 5.1. This package requires a joystick and EGA or VGA color graphics. An 80286, 386, or 486 processor machine is highly recommended. The standard distribution medium for MAT is a 5.25 inch 360K MS-DOS format diskette. The files are compressed using the PKZIP file compression utility. PKUNZIP is included on the distribution diskette. MAT was developed in 1992. IBM PC is a registered trademark of International Business Machines. MS-DOS, Microsoft QuickBasic, and Microsoft Macro Assembler are registered trademarks of Microsoft Corporation. PKZIP and PKUNZIP are registered trademarks of PKWare, Inc.

Decision-making in irrigation networks: Selecting appropriate canal structures using multi-attribute decision analysis.

PubMed

Hosseinzade, Zeinab; Pagsuyoin, Sheree A; Ponnambalam, Kumaraswamy; Monem, Mohammad J

2017-12-01

The stiff competition for water between agriculture and non-agricultural production sectors makes it necessary to have effective management of irrigation networks in farms. However, the process of selecting flow control structures in irrigation networks is highly complex and involves different levels of decision makers. In this paper, we apply multi-attribute decision making (MADM) methodology to develop a decision analysis (DA) framework for evaluating, ranking and selecting check and intake structures for irrigation canals. The DA framework consists of identifying relevant attributes for canal structures, developing a robust scoring system for alternatives, identifying a procedure for data quality control, and identifying a MADM model for the decision analysis. An application is illustrated through an analysis for automation purposes of the Qazvin irrigation network, one of the oldest and most complex irrigation networks in Iran. A survey questionnaire designed based on the decision framework was distributed to experts, managers, and operators of the Qazvin network and to experts from the Ministry of Power in Iran. Five check structures and four intake structures were evaluated. A decision matrix was generated from the average scores collected from the survey, and was subsequently solved using TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) method. To identify the most critical structure attributes for the selection process, optimal attribute weights were calculated using Entropy method. For check structures, results show that the duckbill weir is the preferred structure while the pivot weir is the least preferred. Use of the duckbill weir can potentially address the problem with existing Amil gates where manual intervention is required to regulate water levels during periods of flow extremes. For intake structures, the Neyrpic® gate and constant head orifice are the most and least preferred alternatives, respectively. Some advantages of the Neyrpic® gate are ease of operation and capacity to measure discharge flows. Overall, the application to the Qazvin irrigation network demonstrates the utility of the proposed DA framework in selecting appropriate structures for regulating water flows in irrigation canals. This framework systematically aids the decision process by capturing decisions made at various levels (individual farmers to high-level management). It can be applied to other cases where a new irrigation network is being designed, or where changes in irrigation structures need to be identified to improve flow control in existing networks. Copyright © 2017 Elsevier B.V. All rights reserved.

Real-time assessment of mental workload using psychophysiological measures and artificial neural networks.

PubMed

Wilson, Glenn F; Russell, Christopher A

The functional state of the human operator is critical to optimal system performance. Degraded states of operator functioning can lead to errors and overall suboptimal system performance. Accurate assessment of operator functional state is crucial to the successful implementation of an adaptive aiding system. One method of determining operators' functional state is by monitoring their physiology. In the present study, artificial neural networks using physiological signals were used to continuously monitor, in real time, the functional state of 7 participants while they performed the Multi-Attribute Task Battery with two levels of task difficulty. Six channels of brain electrical activity and eye, heart and respiration measures were evaluated on line. The accuracy of the classifier was determined to test its utility as an on-line measure of operator state. The mean classification accuracies were 85%, 82%, and 86% for the baseline, low task difficulty, and high task difficulty conditions, respectively. The high levels of accuracy suggest that these procedures can be used to provide accurate estimates of operator functional state that can be used to provide adaptive aiding. The relative contribution of each of the 43 psychophysiological features was also determined. Actual or potential applications of this research include test and evaluation and adaptive aiding implementation.

Fingerprint Analysis: Moving Toward Multiattribute Determination via Individual Markers.

PubMed

Brunelle, Erica; Huynh, Crystal; Alin, Eden; Eldridge, Morgan; Le, Anh Minh; Halámková, Lenka; Halámek, Jan

2018-01-02

Forensic science will be forever revolutionized if law enforcement can identify personal attributes of a person of interest solely from a fingerprint. For the past 2 years, the goal of our group has been to establish a way to identify originator attributes, specifically biological sex, from a single analyte. To date, an enzymatic assay and two chemical assays have been developed for the analysis of multiple analytes. In this manuscript, two additional assays have been developed. This time, however, the assays utilize only one amino acid each. The enzymatic assay targets alanine and employs alanine transaminase (ALT), pyruvate oxidase (POx), and horseradish peroxidase (HRP). The other, a chemical assay, is known as the Sakaguchi test and targets arginine. It is important to note that alanine has a significantly higher concentration than arginine in the fingerprint content of both males and females. Both assays proved to be capable of accurately differentiating between male and female fingerprints, regardless of their respective average concentration. The ability to target a single analyte will transform forensic science as each originator attribute can be correlated to a different analyte. This would then lead to the possibility of identifying multiple attributes from a single fingerprint sample. Ultimately, this would allow for a profile of a person of interest to be established without the need for time-consuming lab processes.

Multi-criteria decision analysis in environmental sciences: ten years of applications and trends.

PubMed

Huang, Ivy B; Keisler, Jeffrey; Linkov, Igor

2011-09-01

Decision-making in environmental projects requires consideration of trade-offs between socio-political, environmental, and economic impacts and is often complicated by various stakeholder views. Multi-criteria decision analysis (MCDA) emerged as a formal methodology to face available technical information and stakeholder values to support decisions in many fields and can be especially valuable in environmental decision making. This study reviews environmental applications of MCDA. Over 300 papers published between 2000 and 2009 reporting MCDA applications in the environmental field were identified through a series of queries in the Web of Science database. The papers were classified by their environmental application area, decision or intervention type. In addition, the papers were also classified by the MCDA methods used in the analysis (analytic hierarchy process, multi-attribute utility theory, and outranking). The results suggest that there is a significant growth in environmental applications of MCDA over the last decade across all environmental application areas. Multiple MCDA tools have been successfully used for environmental applications. Even though the use of the specific methods and tools varies in different application areas and geographic regions, our review of a few papers where several methods were used in parallel with the same problem indicates that recommended course of action does not vary significantly with the method applied. Published by Elsevier B.V.

Client expectations and satisfaction of quality in home care services. A consumer perspective.

PubMed

Samuelsson, G; Wister, A

2000-12-01

This study examines clients' expectations of quality in home care services and their perceived satisfaction with services among a random sample of 76 home care recipients in Vancouver, Canada. The researchers conducted face-to-face interviews that applied Multiattribute Utility Technology, a procedure that organizes several quality attributes of "ideal" home care into a tree structure to compare their relative importance and ranking from the clients' perspective. Participants also were asked to state their satisfaction or dissatisfaction with the services received in these domains. Among the five main quality attributes identified, the subjects ranked suitability of the home helper and its subset, personal competence, as the most important indicators of quality, followed by continuity in service. In addition, clients tended to have a high level of satisfaction with regard to the attributes of overall home care services. The highest level of satisfaction was reported for elements of personal dispositions of home care staff. The lowest level of satisfaction involved the time/availability components of the service. Finally, comparisons between client expectations and satisfaction of received home care services showed the highest discrepancy for the attributes of influence and time/availability and the greatest congruence for personal attributes of the staff. The results are discussed in terms of their implications for the delivery of home care services.

Extreme Sparse Multinomial Logistic Regression: A Fast and Robust Framework for Hyperspectral Image Classification

NASA Astrophysics Data System (ADS)

Cao, Faxian; Yang, Zhijing; Ren, Jinchang; Ling, Wing-Kuen; Zhao, Huimin; Marshall, Stephen

2017-12-01

Although the sparse multinomial logistic regression (SMLR) has provided a useful tool for sparse classification, it suffers from inefficacy in dealing with high dimensional features and manually set initial regressor values. This has significantly constrained its applications for hyperspectral image (HSI) classification. In order to tackle these two drawbacks, an extreme sparse multinomial logistic regression (ESMLR) is proposed for effective classification of HSI. First, the HSI dataset is projected to a new feature space with randomly generated weight and bias. Second, an optimization model is established by the Lagrange multiplier method and the dual principle to automatically determine a good initial regressor for SMLR via minimizing the training error and the regressor value. Furthermore, the extended multi-attribute profiles (EMAPs) are utilized for extracting both the spectral and spatial features. A combinational linear multiple features learning (MFL) method is proposed to further enhance the features extracted by ESMLR and EMAPs. Finally, the logistic regression via the variable splitting and the augmented Lagrangian (LORSAL) is adopted in the proposed framework for reducing the computational time. Experiments are conducted on two well-known HSI datasets, namely the Indian Pines dataset and the Pavia University dataset, which have shown the fast and robust performance of the proposed ESMLR framework.

Mapping Fire Severity Using Imaging Spectroscopy and Kernel Based Image Analysis

NASA Astrophysics Data System (ADS)

Prasad, S.; Cui, M.; Zhang, Y.; Veraverbeke, S.

2014-12-01

Improved spatial representation of within-burn heterogeneity after wildfires is paramount to effective land management decisions and more accurate fire emissions estimates. In this work, we demonstrate feasibility and efficacy of airborne imaging spectroscopy (hyperspectral imagery) for quantifying wildfire burn severity, using kernel based image analysis techniques. Two different airborne hyperspectral datasets, acquired over the 2011 Canyon and 2013 Rim fire in California using the Airborne Visible InfraRed Imaging Spectrometer (AVIRIS) sensor, were used in this study. The Rim Fire, covering parts of the Yosemite National Park started on August 17, 2013, and was the third largest fire in California's history. Canyon Fire occurred in the Tehachapi mountains, and started on September 4, 2011. In addition to post-fire data for both fires, half of the Rim fire was also covered with pre-fire images. Fire severity was measured in the field using Geo Composite Burn Index (GeoCBI). The field data was utilized to train and validate our models, wherein the trained models, in conjunction with imaging spectroscopy data were used for GeoCBI estimation wide geographical regions. This work presents an approach for using remotely sensed imagery combined with GeoCBI field data to map fire scars based on a non-linear (kernel based) epsilon-Support Vector Regression (e-SVR), which was used to learn the relationship between spectra and GeoCBI in a kernel-induced feature space. Classification of healthy vegetation versus fire-affected areas based on morphological multi-attribute profiles was also studied. The availability of pre- and post-fire imaging spectroscopy data over the Rim Fire provided a unique opportunity to evaluate the performance of bi-temporal imaging spectroscopy for assessing post-fire effects. This type of data is currently constrained because of limited airborne acquisitions before a fire, but will become widespread with future spaceborne sensors such as those on the planned NASA HyspIRI mission.

Tools, information sources, and methods used in deciding on drug availability in HMOs.

PubMed

Barner, J C; Thomas, J

1998-01-01

The use and importance of specific decision-making tools, information sources, and drug-use management methods in determining drug availability and use in HMOs were studied. A questionnaire was sent to 303 randomly selected HMOs. Respondents were asked to rate their use of each of four formal decision-making tools and its relative importance, as well as the use and importance of eight information sources and 11 methods for managing drug availability and use, on a 5-point scale. The survey response rate was 28%. Approximately half of the respondents reported that their HMOs used decision analysis or multiattribute analysis in deciding on drug availability. If used, these tools were rated as very important. There were significant differences in levels of use by HMO type, membership size, and age. Journal articles and reference books were reported most often as information sources. Retrospective drug-use review was used very often and perceived to be very important in managing drug use. Other management methods were used only occasionally, but the importance placed on these tools when used ranged from moderately to very important. Older organizations used most of the management methods more often than did other HMOs. Decision analysis and multiattribute analysis were the most commonly used tools for deciding on which drugs to make available to HMO members, and reference books and journal articles were the most commonly used information sources. Retrospective and prospective drug-use reviews were the most commonly applied methods for managing HMO members' access to drugs.

Experimental analysis of multi-attribute decision-making based on Atanassov intuitionistic fuzzy sets: a discussion of anchor dependency and accuracy functions

NASA Astrophysics Data System (ADS)

Chen, Ting-Yu

2012-06-01

This article presents a useful method for relating anchor dependency and accuracy functions to multiple attribute decision-making (MADM) problems in the context of Atanassov intuitionistic fuzzy sets (A-IFSs). Considering anchored judgement with displaced ideals and solution precision with minimal hesitation, several auxiliary optimisation models have proposed to obtain the optimal weights of the attributes and to acquire the corresponding TOPSIS (the technique for order preference by similarity to the ideal solution) index for alternative rankings. Aside from the TOPSIS index, as a decision-maker's personal characteristics and own perception of self may also influence the direction in the axiom of choice, the evaluation of alternatives is conducted based on distances of each alternative from the positive and negative ideal alternatives, respectively. This article originates from Li's [Li, D.-F. (2005), 'Multiattribute Decision Making Models and Methods Using Intuitionistic Fuzzy Sets', Journal of Computer and System Sciences, 70, 73-85] work, which is a seminal study of intuitionistic fuzzy decision analysis using deduced auxiliary programming models, and deems it a benchmark method for comparative studies on anchor dependency and accuracy functions. The feasibility and effectiveness of the proposed methods are illustrated by a numerical example. Finally, a comparative analysis is illustrated with computational experiments on averaging accuracy functions, TOPSIS indices, separation measures from positive and negative ideal alternatives, consistency rates of ranking orders, contradiction rates of the top alternative and average Spearman correlation coefficients.

Towards the ecotourism: a decision support model for the assessment of sustainability of mountain huts in the Alps.

PubMed

Stubelj Ars, Mojca; Bohanec, Marko

2010-12-01

This paper studies mountain hut infrastructure in the Alps as an important element of ecotourism in the Alpine region. To improve the decision-making process regarding the implementation of future infrastructure and improvement of existing infrastructure in the vulnerable natural environment of mountain ecosystems, a new decision support model has been developed. The methodology is based on qualitative multi-attribute modelling supported by the DEXi software. The integrated rule-based model is hierarchical and consists of two submodels that cover the infrastructure of the mountain huts and that of the huts' surroundings. The final goal for the designed tool is to help minimize the ecological footprint of tourists in environmentally sensitive and undeveloped mountain areas and contribute to mountain ecotourism. The model has been tested in the case study of four mountain huts in Triglav National Park in Slovenia. Study findings provide a new empirical approach to evaluating existing mountain infrastructure and predicting improvements for the future. The assessment results are of particular interest for decision makers in protected areas, such as Alpine national parks managers and administrators. In a way, this model proposes an approach to the management assessment of mountain huts with the main aim of increasing the quality of life of mountain environment visitors as well as the satisfaction of tourists who may eventually become ecotourists. Copyright © 2010 Elsevier Ltd. All rights reserved.

Demand assessment and price-elasticity estimation of quality-improved primary health care in Palestine: a contribution from the contingent valuation method.

PubMed

Mataria, Awad; Luchini, Stéphane; Daoud, Yousef; Moatti, Jean-Paul

2007-10-01

This paper proposes a new methodology to assess demand and price-elasticity for health care, based on patients' stated willingness to pay (WTP) values for certain aspects of health care quality improvements. A conceptual analysis of how respondents consider contingent valuation (CV) questions allowed us to specify a probability density function of stated WTP values, and consequently, to model a demand function for quality-improved health care, using a parametric survival approach. The model was empirically estimated using a CV study intended to assess patients' values for improving the quality of primary health care (PHC) services in Palestine. A random sample of 499 individuals was interviewed following medical consultation in four PHC centers. Quality was assessed using a multi-attribute approach; and respondents valued seven specific quality improvements using a decomposed valuation scenario and a payment card elicitation technique. Our results suggest an inelastic demand at low user fees levels, and when the price-increase is accompanied with substantial quality-improvements. Nevertheless, demand becomes more and more elastic if user fees continue to rise. On the other hand, patients' reactions to price-increase turn out to depend on their level of income. Our results can be used to design successful health care financing strategies that include a consideration of patients' preferences and financial capacities. John Wiley & Sons, Ltd.

Life cycle thinking and assessment tools on environmentally-benign electronics: Convergent optimization of materials use, end-of-life strategy and environmental policies

NASA Astrophysics Data System (ADS)

Zhou, Xiaoying

The purpose of this study is to integrate the quantitative environmental performance assessment tools and the theory of multi-objective optimization within the boundary of electronic product systems to support the selection among design alternatives in terms of environmental impact, technical criteria, and economic feasibility. To meet with the requirements that result from emerging environmental legislation targeting electronics products, the research addresses an important analytical methodological approach to facilitate environmentally conscious design and end-of-life management with a life cycle viewpoint. A synthesis of diverse assessment tools is applied on a set of case studies: lead-free solder materials selection, cellular phone design, and desktop display technology assessment. In the first part of this work, an in-depth industrial survey of the status and concerns of the U.S. electronics industry on the elimination of lead (Pb) in solders is described. The results show that the trade-offs among environmental consequences, technology challenges, business risks, legislative compliance and stakeholders' preferences must be explicitly, simultaneously, and systematically addressed in the decision-making process used to guide multi-faceted planning of environmental solutions. In the second part of this work, the convergent optimization of the technical cycle, economic cycle and environmental cycle is addressed in a coherent and systematic way using the application of environmentally conscious design of cellular phones. The technical understanding of product structure, components analysis, and materials flow facilitates the development of "Design for Disassembly" guidelines. A bottom-up disassembly analysis on a "bill of materials" based structure at a micro-operational level is utilized to select optimal end-of-life strategies on the basis of economic feasibility. A macro-operational level life cycle model is used to investigate the environmental consequences linking environmental impact with the cellular phone production activities focusing on the upstream manufacturing and end-of-life life cycle stages. The last part of this work, the quantitative elicitation of weighting factors facilitates the comparison of trade-offs in the context of a multi-attribute problem. An integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), is proposed to assess alternatives at the design phase of a product system and is validated with the assessment of desktop display technologies and lead-free solder alternatives.

Deciding how to decide: ventromedial frontal lobe damage affects information acquisition in multi-attribute decision making.

PubMed

Fellows, Lesley K

2006-04-01

Ventromedial frontal lobe (VMF) damage is associated with impaired decision making. Recent efforts to understand the functions of this brain region have focused on its role in tracking reward, punishment and risk. However, decision making is complex, and frontal lobe damage might be expected to affect it at other levels. This study used process-tracing techniques to explore the effect of VMF damage on multi-attribute decision making under certainty. Thirteen subjects with focal VMF damage were compared with 11 subjects with frontal damage that spared the VMF and 21 demographically matched healthy control subjects. Participants chose rental apartments in a standard information board task drawn from the literature on normal decision making. VMF subjects performed the decision making task in a way that differed markedly from all other groups, favouring an 'alternative-based' information acquisition strategy (i.e. they organized their information search around individual apartments). In contrast, both healthy control subjects and subjects with damage predominantly involving dorsal and/or lateral prefrontal cortex pursued primarily 'attribute-based' search strategies (in which information was acquired about categories such as rent and noise level across several apartments). This difference in the pattern of information acquisition argues for systematic differences in the underlying decision heuristics and strategies employed by subjects with VMF damage, which in turn may affect the quality of their choices. These findings suggest that the processes supported by ventral and medial prefrontal cortex need to be conceptualized more broadly, to account for changes in decision making under conditions of certainty, as well as uncertainty, following damage to these areas.

Time Sharing Between Robotics and Process Control: Validating a Model of Attention Switching.

PubMed

Wickens, Christopher Dow; Gutzwiller, Robert S; Vieane, Alex; Clegg, Benjamin A; Sebok, Angelia; Janes, Jess

2016-03-01

The aim of this study was to validate the strategic task overload management (STOM) model that predicts task switching when concurrence is impossible. The STOM model predicts that in overload, tasks will be switched to, to the extent that they are attractive on task attributes of high priority, interest, and salience and low difficulty. But more-difficult tasks are less likely to be switched away from once they are being performed. In Experiment 1, participants performed four tasks of the Multi-Attribute Task Battery and provided task-switching data to inform the role of difficulty and priority. In Experiment 2, participants concurrently performed an environmental control task and a robotic arm simulation. Workload was varied by automation of arm movement and both the phases of environmental control and existence of decision support for fault management. Attention to the two tasks was measured using a head tracker. Experiment 1 revealed the lack of influence of task priority and confirmed the differing roles of task difficulty. In Experiment 2, the percentage attention allocation across the eight conditions was predicted by the STOM model when participants rated the four attributes. Model predictions were compared against empirical data and accounted for over 95% of variance in task allocation. More-difficult tasks were performed longer than easier tasks. Task priority does not influence allocation. The multiattribute decision model provided a good fit to the data. The STOM model is useful for predicting cognitive tunneling given that human-in-the-loop simulation is time-consuming and expensive. © 2016, Human Factors and Ergonomics Society.

Demonstration of a Probabilistic Technique for the Determination of Economic Viability of Very Large Transport Configurations

NASA Technical Reports Server (NTRS)

Mavris, Dimitri N.

1998-01-01

Over the past few years, modem aircraft design has experienced a paradigm shift from designing for performance to designing for affordability. This report contains a probabilistic approach that will allow traditional deterministic design methods to be extended to account for disciplinary, economic, and technological uncertainty. The probabilistic approach was facilitated by the Fast Probability Integration (FPI) technique; a technique which allows the designer to gather valuable information about the vehicle's behavior in the design space. This technique is efficient for assessing multi-attribute, multi-constraint problems in a more realistic fashion. For implementation purposes, this technique is applied to illustrate how both economic and technological uncertainty associated with a Very Large Transport aircraft concept may be assessed. The assessment is evaluated with the FPI technique to determine the cumulative probability distributions of the design space, as bound by economic objectives and performance constraints. These distributions were compared to established targets for a comparable large capacity aircraft, similar in size to the Boeing 747-400. The conventional baseline configuration design space was determined to be unfeasible and marginally viable, motivating the infusion of advanced technologies, including reductions in drag, specific fuel consumption, wing weight, and Research, Development, Testing, and Evaluation costs. The resulting system design space was qualitatively assessed with technology metric "k" factors. The infusion of technologies shifted the VLT design into regions of feasibility and greater viability. The study also demonstrated a method and relationship by which the impact of new technologies may be assessed in a more system focused approach.

Beyond utilitarianism: a method for analyzing competing ethical principles in a decision analysis of liver transplantation.

PubMed

Volk, Michael L; Lok, Anna S F; Ubel, Peter A; Vijan, Sandeep

2008-01-01

The utilitarian foundation of decision analysis limits its usefulness for many social policy decisions. In this study, the authors examine a method to incorporate competing ethical principles in a decision analysis of liver transplantation for a patient with acute liver failure (ALF). A Markov model was constructed to compare the benefit of transplantation for a patient with ALF versus the harm caused to other patients on the waiting list and to determine the lowest acceptable 5-y posttransplant survival for the ALF patient. The weighting of the ALF patient and other patients was then adjusted using a multiattribute variable incorporating utilitarianism, urgency, and other principles such as fair chances. In the base-case analysis, the strategy of transplanting the ALF patient resulted in a 0.8% increase in the risk of death and a utility loss of 7.8 quality-adjusted days of life for each of the other patients on the waiting list. These harms cumulatively outweighed the benefit of transplantation for an ALF patient having a posttransplant survival of less than 48% at 5 y. However, the threshold for an acceptable posttransplant survival for the ALF patient ranged from 25% to 56% at 5 y, depending on the ethical principles involved. The results of the decision analysis vary depending on the ethical perspective. This study demonstrates how competing ethical principles can be numerically incorporated in a decision analysis.

Using multiple pharmacoeconomic methods to conduct a cost-effectiveness analysis of histamine H2-receptor antagonists.

PubMed

McCoy, S; Blayney-Chandramouli, J; Mutnick, A

1998-12-15

A formulary decision at a health care institution was studied by using two pharmacoeconomic methods. A pharmacoeconomic study was undertaken to assess the impact of a 1995 formulary decision to designate cimetidine as the primary histamine H2-receptor antagonist (H2RA) and to restrict the use of famotidine. Consecutive patients receiving either i.v. cimetidine or famotidine for stress ulcer prophylaxis were reviewed during a two-month period in 1997, and information on demographics, dosage and duration of H2RA therapy, admission date, laboratory test values, and adverse drug reactions was collected. Data for 62 patients (43 cimetidine recipients and 19 famotidine recipients) were evaluated. Therapy was categorized as successful or failed, and the data were then evaluated by decision analysis to evaluate the cost-effectiveness of the agents and by multiattribute utility theory (MAUT) to incorporate a humanistic evaluation of the treatments, namely, the number of doses administered and the number of times dosages were changed. The decision tree revealed that the average cost of receiving cimetidine was $82.01 and the average cost of famotidine therapy was $92.45. The MAUT analysis showed that cimetidine was the preferred agent as long as cost was valued at greater than 60% of the decision-making process and efficacy remained equal between the two agents. Two pharmacoeconomic methods lent support to a formulary decision at a health care institution.

Using multi-attribute decision-making approaches in the selection of a hospital management system.

PubMed

Arasteh, Mohammad Ali; Shamshirband, Shahaboddin; Yee, Por Lip

2018-01-01

The most appropriate organizational software is always a real challenge for managers, especially, the IT directors. The illustration of the term "enterprise software selection", is to purchase, create, or order a software that; first, is best adapted to require of the organization; and second, has suitable price and technical support. Specifying selection criteria and ranking them, is the primary prerequisite for this action. This article provides a method to evaluate, rank, and compare the available enterprise software for choosing the apt one. The prior mentioned method is constituted of three-stage processes. First, the method identifies the organizational requires and assesses them. Second, it selects the best method throughout three possibilities; indoor-production, buying software, and ordering special software for the native use. Third, the method evaluates, compares and ranks the alternative software. The third process uses different methods of multi attribute decision making (MADM), and compares the consequent results. Based on different characteristics of the problem; several methods had been tested, namely, Analytic Hierarchy Process (AHP), Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), Elimination and Choice Expressing Reality (ELECTURE), and easy weight method. After all, we propose the most practical method for same problems.

On the nature of bias and defects in the software specification process

NASA Technical Reports Server (NTRS)

Straub, Pablo A.; Zelkowitz, Marvin V.

1992-01-01

Implementation bias in a specification is an arbitrary constraint in the solution space. This paper describes the problem of bias. Additionally, this paper presents a model of the specification and design processes describing individual subprocesses in terms of precision/detail diagrams and a model of bias in multi-attribute software specifications. While studying how bias is introduced into a specification we realized that software defects and bias are dual problems of a single phenomenon. This was used to explain the large proportion of faults found during the coding phase at the Software Engineering Laboratory at NASA/GSFC.

The LSST Data Mining Research Agenda

NASA Astrophysics Data System (ADS)

Borne, K.; Becla, J.; Davidson, I.; Szalay, A.; Tyson, J. A.

2008-12-01

We describe features of the LSST science database that are amenable to scientific data mining, object classification, outlier identification, anomaly detection, image quality assurance, and survey science validation. The data mining research agenda includes: scalability (at petabytes scales) of existing machine learning and data mining algorithms; development of grid-enabled parallel data mining algorithms; designing a robust system for brokering classifications from the LSST event pipeline (which may produce 10,000 or more event alerts per night) multi-resolution methods for exploration of petascale databases; indexing of multi-attribute multi-dimensional astronomical databases (beyond spatial indexing) for rapid querying of petabyte databases; and more.

Auditory attention and multiattribute decision-making during a 33 h sleep-deprivation period: mean performance and between-subject dispersions.

PubMed

Linde, L; Edland, A; Bergström, M

1999-05-01

One purpose of this study was to compare attention in the evening (22:00 h), in the late night (04:00 h), in the morning (10:00 h) and in the afternoon (16:00 h) during a period of complete wakefulness beginning at 08:00 h with a mean daytime performance without sleep deprivation. Another purpose was to investigate sleep deprivation effects on a multi-attribute decision-making task with and without time pressure. Twelve sleep-deprived male students were compared with 12 male non-sleep-deprived students. Both groups were tested five times with an auditory attention and a symbol coding task. Significant declines (p < 0.05) in mean level of performance on the auditory attention task were found at 04:00, 10:00 and 16:00 h for subjects forced to the vigil. However, the effect of the sleep deprivation manifested itself even more in increased between-subject dispersions. There were no differences between time pressure and no time pressure on the decision-making task and no significant differences between sleep-deprived and non-sleep-deprived subjects in decision strategies. In fact, the pattern of decision strategies among the sleep-deprived subject was more similar to a pattern of decision strategies typical for non-stressful conditions than the pattern of decision strategies among the non-sleep-deprived subjects. This result may have been due to the fact that the sleep loss acted as a dearouser. Here too, however, the variances differed significantly among sleep-deprived and non-sleep-deprived subjects, indicating that the sleep-deprived subjects were more variable in their decision strategy pattern than the control group.

Facies Modeling Using 3D Pre-Stack Simultaneous Seismic Inversion and Multi-Attribute Probability Neural Network Transform in the Wattenberg Field, Colorado

NASA Astrophysics Data System (ADS)

Harryandi, Sheila

The Niobrara/Codell unconventional tight reservoir play at Wattenberg Field, Colorado has potentially two billion barrels of oil equivalent requiring hundreds of wells to access this resource. The Reservoir Characterization Project (RCP), in conjunction with Anadarko Petroleum Corporation (APC), began reservoir characterization research to determine how to increase reservoir recovery while maximizing operational efficiency. Past research results indicate that targeting the highest rock quality within the reservoir section for hydraulic fracturing is optimal for improving horizontal well stimulation through multi-stage hydraulic fracturing. The reservoir is highly heterogeneous, consisting of alternating chalks and marls. Modeling the facies within the reservoir is very important to be able to capture the heterogeneity at the well-bore scale; this heterogeneity is then upscaled from the borehole scale to the seismic scale to distribute the heterogeneity in the inter-well space. I performed facies clustering analysis to create several facies defining the reservoir interval in the RCP Wattenberg Field study area. Each facies can be expressed in terms of a range of rock property values from wells obtained by cluster analysis. I used the facies classification from the wells to guide the pre-stack seismic inversion and multi-attribute transform. The seismic data extended the facies information and rock quality information from the wells. By obtaining this information from the 3D facies model, I generated a facies volume capturing the reservoir heterogeneity throughout a ten square mile study-area within the field area. Recommendations are made based on the facies modeling, which include the location for future hydraulic fracturing/re-fracturing treatments to improve recovery from the reservoir, and potential deeper intervals for future exploration drilling targets.

A Three Stage Multi-attribute Procurement Auction: A Proposal for Department of Defense (DoD) Vendor Selection Decisions.

DTIC Science & Technology

2010-04-30

regarding production capabilities and costs, but must somehow form beliefs about the likelihood of a bid being accepted. We facilitate formulation...which both vendors believe the buyer places equal weight on the two attributes, but the vendors differ in their capabilities of producing those...exchange—the future of B2B . Harvard Business Review, 78(6), 86-96. = ^Åèìáëáíáçå=oÉëÉ~êÅÜ=mêçÖê~ã= do^ar^qb=p`elli=lc=_rpfkbpp=C=mr_if`=mlif`v= 444= k^s^i

Decision-making Strategies and Performance among Seniors1

PubMed Central

Besedeš, Tibor; Deck, Cary; Sarangi, Sudipta; Shor, Mikhael

2011-01-01

Using paper and pencil experiments administered in senior centers, we examine decision-making performance in multi-attribute decision problems. We differentiate the effects of declining cognitive performance and changing cognitive process on decision-making performance of seniors as they age. We find a significant decline in performance with age due to reduced reliance on common heuristics and increased decision-making randomness among our oldest subjects. However, we find that increasing the number of options in a decision problem increases the number of heuristics brought to the task. This challenges the choice overload view that people give up when confronted with too much choice. PMID:22408282

Experimental measurement of preferences in health and healthcare using best-worst scaling: an overview.

PubMed

Mühlbacher, Axel C; Kaczynski, Anika; Zweifel, Peter; Johnson, F Reed

2016-12-01

Best-worst scaling (BWS), also known as maximum-difference scaling, is a multiattribute approach to measuring preferences. BWS aims at the analysis of preferences regarding a set of attributes, their levels or alternatives. It is a stated-preference method based on the assumption that respondents are capable of making judgments regarding the best and the worst (or the most and least important, respectively) out of three or more elements of a choice-set. As is true of discrete choice experiments (DCE) generally, BWS avoids the known weaknesses of rating and ranking scales while holding the promise of generating additional information by making respondents choose twice, namely the best as well as the worst criteria. A systematic literature review found 53 BWS applications in health and healthcare. This article expounds possibilities of application, the underlying theoretical concepts and the implementation of BWS in its three variants: 'object case', 'profile case', 'multiprofile case'. This paper contains a survey of BWS methods and revolves around study design, experimental design, and data analysis. Moreover the article discusses the strengths and weaknesses of the three types of BWS distinguished and offered an outlook. A companion paper focuses on special issues of theory and statistical inference confronting BWS in preference measurement.

Comparing capacity coefficient and dual task assessment of visual multitasking workload

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blaha, Leslie M.

Capacity coefficient analysis could offer a theoretically grounded alternative approach to subjective measures and dual task assessment of cognitive workload. Workload capacity or workload efficiency is a human information processing modeling construct defined as the amount of information that can be processed by the visual cognitive system given a specified of amount of time. In this paper, I explore the relationship between capacity coefficient analysis of workload efficiency and dual task response time measures. To capture multitasking performance, I examine how the relatively simple assumptions underlying the capacity construct generalize beyond the single visual decision making tasks. The fundamental toolsmore » for measuring workload efficiency are the integrated hazard and reverse hazard functions of response times, which are defined by log transforms of the response time distribution. These functions are used in the capacity coefficient analysis to provide a functional assessment of the amount of work completed by the cognitive system over the entire range of response times. For the study of visual multitasking, capacity coefficient analysis enables a comparison of visual information throughput as the number of tasks increases from one to two to any number of simultaneous tasks. I illustrate the use of capacity coefficients for visual multitasking on sample data from dynamic multitasking in the modified Multi-attribute Task Battery.« less

Assessing the performance of multiple spectral-spatial features of a hyperspectral image for classification of urban land cover classes using support vector machines and artificial neural network

NASA Astrophysics Data System (ADS)

Pullanagari, Reddy; Kereszturi, Gábor; Yule, Ian J.; Ghamisi, Pedram

2017-04-01

Accurate and spatially detailed mapping of complex urban environments is essential for land managers. Classifying high spectral and spatial resolution hyperspectral images is a challenging task because of its data abundance and computational complexity. Approaches with a combination of spectral and spatial information in a single classification framework have attracted special attention because of their potential to improve the classification accuracy. We extracted multiple features from spectral and spatial domains of hyperspectral images and evaluated them with two supervised classification algorithms; support vector machines (SVM) and an artificial neural network. The spatial features considered are produced by a gray level co-occurrence matrix and extended multiattribute profiles. All of these features were stacked, and the most informative features were selected using a genetic algorithm-based SVM. After selecting the most informative features, the classification model was integrated with a segmentation map derived using a hidden Markov random field. We tested the proposed method on a real application of a hyperspectral image acquired from AisaFENIX and on widely used hyperspectral images. From the results, it can be concluded that the proposed framework significantly improves the results with different spectral and spatial resolutions over different instrumentation.

A Novel Two-Tier Cooperative Caching Mechanism for the Optimization of Multi-Attribute Periodic Queries in Wireless Sensor Networks

PubMed Central

Zhou, ZhangBing; Zhao, Deng; Shu, Lei; Tsang, Kim-Fung

2015-01-01

Wireless sensor networks, serving as an important interface between physical environments and computational systems, have been used extensively for supporting domain applications, where multiple-attribute sensory data are queried from the network continuously and periodically. Usually, certain sensory data may not vary significantly within a certain time duration for certain applications. In this setting, sensory data gathered at a certain time slot can be used for answering concurrent queries and may be reused for answering the forthcoming queries when the variation of these data is within a certain threshold. To address this challenge, a popularity-based cooperative caching mechanism is proposed in this article, where the popularity of sensory data is calculated according to the queries issued in recent time slots. This popularity reflects the possibility that sensory data are interested in the forthcoming queries. Generally, sensory data with the highest popularity are cached at the sink node, while sensory data that may not be interested in the forthcoming queries are cached in the head nodes of divided grid cells. Leveraging these cooperatively cached sensory data, queries are answered through composing these two-tier cached data. Experimental evaluation shows that this approach can reduce the network communication cost significantly and increase the network capability. PMID:26131665

The World Spatiotemporal Analytics and Mapping Project (WSTAMP): Further Progress in Discovering, Exploring, and Mapping Spatiotemporal Patterns Across the World's Largest Open Source Data Sets

NASA Astrophysics Data System (ADS)

Piburn, J.; Stewart, R.; Myers, A.; Sorokine, A.; Axley, E.; Anderson, D.; Burdette, J.; Biddle, C.; Hohl, A.; Eberle, R.; Kaufman, J.; Morton, A.

2017-10-01

Spatiotemporal (ST) analytics applied to major data sources such as the World Bank and World Health Organization has shown tremendous value in shedding light on the evolution of cultural, health, economic, and geopolitical landscapes on a global level. WSTAMP engages this opportunity by situating analysts, data, and analytics together within a visually rich and computationally rigorous online analysis environment. Since introducing WSTAMP at the First International Workshop on Spatiotemporal Computing, several transformative advances have occurred. Collaboration with human computer interaction experts led to a complete interface redesign that deeply immerses the analyst within a ST context, significantly increases visual and textual content, provides navigational crosswalks for attribute discovery, substantially reduce mouse and keyboard actions, and supports user data uploads. Secondly, the database has been expanded to include over 16,000 attributes, 50 years of time, and 200+ nation states and redesigned to support non-annual, non-national, city, and interaction data. Finally, two new analytics are implemented for analyzing large portfolios of multi-attribute data and measuring the behavioral stability of regions along different dimensions. These advances required substantial new approaches in design, algorithmic innovations, and increased computational efficiency. We report on these advances and inform how others may freely access the tool.

Cooperation driven coherence: Brains working hard together.

PubMed

Bezerianos, Anastasios; Sun, Yu; Chen, Yu; Woong, Kian Fong; Taya, Fumihiko; Arico, Pietro; Borghini, Gianluca; Babiloni, Fabio; Thakor, Nitish

2015-01-01

The current study aims to look at the difference in coupling of EEG activity of participant pairs while they perform a cooperative, concurrent, independent yet different task at high and low difficulty levels. Participants performed the National Aeronautics and Space Administration (NASA) designed Multi-Attribute Task Battery (MATB-II) task which simulates a pilot and copilot operating an aircraft. Each participant in the pair was responsible for 2 out of 4 subtasks which were independent and different from one another while all tasks occurs concurrently in real time with difficulty levels being the frequency that adjustments are required for each subtask. We found that as the task become more difficult, there was more coupling between the pilot and copilot.

Priority Determination of Underwater Tourism Site Development in Gorontalo Province using Analytical Hierarchy Process (AHP)

NASA Astrophysics Data System (ADS)

Rohandi, M.; Tuloli, M. Y.; Jassin, R. T.

2018-02-01

This research aims to determine the development of priority of underwater tourism in Gorontalo province using the Analytical Hierarchy Process (AHP) method which is one of DSS methods applying Multi-Attribute Decision Making (MADM). This method used 5 criteria and 28 alternatives to determine the best priority of underwater tourism site development in Gorontalo province. Based on the AHP calculation it appeared that the best priority development of underwater tourism site is Pulau Cinta whose total AHP score is 0.489 or 48.9%. This DSS produced a reliable result, faster solution, time-saving, and low cost for the decision makers to obtain the best underwater tourism site to be developed.

Validation of a multi-criteria evaluation model for animal welfare.

PubMed

Martín, P; Czycholl, I; Buxadé, C; Krieter, J

2017-04-01

The aim of this paper was to validate an alternative multi-criteria evaluation system to assess animal welfare on farms based on the Welfare Quality® (WQ) project, using an example of welfare assessment of growing pigs. This alternative methodology aimed to be more transparent for stakeholders and more flexible than the methodology proposed by WQ. The WQ assessment protocol for growing pigs was implemented to collect data in different farms in Schleswig-Holstein, Germany. In total, 44 observations were carried out. The aggregation system proposed in the WQ protocol follows a three-step aggregation process. Measures are aggregated into criteria, criteria into principles and principles into an overall assessment. This study focussed on the first two steps of the aggregation. Multi-attribute utility theory (MAUT) was used to produce a value of welfare for each criterion and principle. The utility functions and the aggregation function were constructed in two separated steps. The MACBETH (Measuring Attractiveness by a Categorical-Based Evaluation Technique) method was used for utility function determination and the Choquet integral (CI) was used as an aggregation operator. The WQ decision-makers' preferences were fitted in order to construct the utility functions and to determine the CI parameters. The validation of the MAUT model was divided into two steps, first, the results of the model were compared with the results of the WQ project at criteria and principle level, and second, a sensitivity analysis of our model was carried out to demonstrate the relative importance of welfare measures in the different steps of the multi-criteria aggregation process. Using the MAUT, similar results were obtained to those obtained when applying the WQ protocol aggregation methods, both at criteria and principle level. Thus, this model could be implemented to produce an overall assessment of animal welfare in the context of the WQ protocol for growing pigs. Furthermore, this methodology could also be used as a framework in order to produce an overall assessment of welfare for other livestock species. Two main findings are obtained from the sensitivity analysis, first, a limited number of measures had a strong influence on improving or worsening the level of welfare at criteria level and second, the MAUT model was not very sensitive to an improvement in or a worsening of single welfare measures at principle level. The use of weighted sums and the conversion of disease measures into ordinal scores should be reconsidered.

Qualitatively Coherent Representation Makes Decision-Making Easier with Binary-Colored Multi-Attribute Tables: An Eye-Tracking Study

PubMed Central

Morii, Masahiro; Ideno, Takashi; Takemura, Kazuhisa; Okada, Mitsuhiro

2017-01-01

We aimed to identify the ways in which coloring cells affected decision-making in the context of binary-colored multi-attribute tables, using eye movement data. In our black-white attribute tables, the value of attributes was limited to two (with a certain threshold for each attribute) and each cell of the table was colored either black or white on the white background. We compared the two natural ways of systematic color assignment: “quantitatively coherent” ways and “qualitatively coherent” ways (namely, the ways in which the black-white distinction represented the quantitative amount distinction, and the ways in which the black-white distinction represented the quality distinction). The former consists of the following two types: (Type 1) “larger is black,” where the larger value-level was represented by black, and “smaller is white,” and (Type 2) “smaller is black.” The latter consisted of the following two types: (Type 3) “better is black,” and (Type 4) “worse is black.” We obtained the following two findings. [Result 1] The qualitatively coherent black-white tables (Types 3 and 4) made decision-making easier than the quantitatively coherent ones (Types 1 and 2). [Result 2] Among the two qualitatively coherent types, the “black is better” tables (Type 3) made decision making easier; in fact, the participants focused on the more important (black) cells in the case of “black is better” tables (Type 3) while they did not focus enough on the more important (white) ones in the case of the “white is better” tables (Type 4). We also examined some measures of eye movement patterns and showed that these measures supported our hypotheses. The data showed differences in the eye movement patterns between the first and second halves of each trial, which indicated the phased or combined decision strategies taken by the participants. PMID:28861020

Comparing spatially explicit ecological and social values for natural areas to identify effective conservation strategies.

PubMed

Bryan, Brett Anthony; Raymond, Christopher Mark; Crossman, Neville David; King, Darran

2011-02-01

Consideration of the social values people assign to relatively undisturbed native ecosystems is critical for the success of science-based conservation plans. We used an interview process to identify and map social values assigned to 31 ecosystem services provided by natural areas in an agricultural landscape in southern Australia. We then modeled the spatial distribution of 12 components of ecological value commonly used in setting spatial conservation priorities. We used the analytical hierarchy process to weight these components and used multiattribute utility theory to combine them into a single spatial layer of ecological value. Social values assigned to natural areas were negatively correlated with ecological values overall, but were positively correlated with some components of ecological value. In terms of the spatial distribution of values, people valued protected areas, whereas those natural areas underrepresented in the reserve system were of higher ecological value. The habitats of threatened animal species were assigned both high ecological value and high social value. Only small areas were assigned both high ecological value and high social value in the study area, whereas large areas of high ecological value were of low social value, and vice versa. We used the assigned ecological and social values to identify different conservation strategies (e.g., information sharing, community engagement, incentive payments) that may be effective for specific areas. We suggest that consideration of both ecological and social values in selection of conservation strategies can enhance the success of science-based conservation planning. ©2010 Society for Conservation Biology.

A decision support tool for selecting the optimal sewage sludge treatment.

PubMed

Turunen, Ville; Sorvari, Jaana; Mikola, Anna

2018-02-01

Sewage sludge contains significant amounts of resources, such as nutrients and organic matter. At the same time, the organic contaminants (OC) found in sewage sludge are of growing concern. Consequently, in many European countries incineration is currently favored over recycling in agriculture. This study presents a Multi-Attribute Value Theory (MAVT)-based decision support tool (DST) for facilitating sludge treatment decisions. Essential decision criteria were recognized and prioritized, i.e., weighted, by experts from water utilities. Since the fate of organic contaminants was in focus, a simple scoring method was developed to take into account their environmental risks. The final DST assigns each sludge treatment method a preference score expressing its superiority compared to alternative methods. The DST was validated by testing it with data from two Finnish municipal wastewater treatment plants (WWTP). The validation results of the first case study preferred sludge pyrolysis (preference score: 0.629) to other alternatives: composting and incineration (score 0.580, and 0.484 respectively). The preference scores were influenced by WWTP dependent factors, i.e., the operating environment and the weighting of the criteria. A lack of data emerged as the main practical limitation. Therefore, not all of the relevant criteria could be included in the value tree. More data are needed on the effects of treatment methods on the availability of nutrients, the quality of organic matter and sludge-borne OCs. Despite these shortcomings, the DST proved useful and adaptable in decision-making. It can also help achieve a more transparent, understandable and comprehensive decision-making process. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects on Environmental and Socioeconomic Sustainability of Producing Ethanol from Perennial Grasses

NASA Astrophysics Data System (ADS)

Dale, V. H.; Parish, E. S.

2016-12-01

Using perennial grasses to produce ethanol can enhance progress toward sustainability. A suite of 35 environmental and socioeconomic sustainability indicators was considered in a holistic sustainability assessment of a five-year switchgrass-to-ethanol production experiment centered on a demonstration-scale biorefinery in Vonore, Tennessee. By combining field measurements, literature review and expert opinion, the team was able to rate 28 of the 35 recommended sustainability indicators. The team combined these ratings within a multi-attribute decision support system tool and used this information to compare the sustainability of producing 2118 hectares of no-till switchgrass relative to two alternative business-as-usual scenarios of unmanaged pasture and tilled corn production. The results suggest that East Tennessee switchgrass production improves environmental quality overall and can be beneficial to the counties surrounding the biorefinery in terms of dollars earned and jobs created. The timing of switchgrass production also provides an opportunity to use inactive equipment and laborers. By incorporating a landscape design approach, the opportunities, constraints and most reasonable paths forward for growing bioenergy feedstock in specific context can be assessed in a way that adapts and improves local practices. Lessons learned from this case study are being incorporated into sustainability assessments of corn stover in Iowa and a variety of bioenergy feedstocks in diverse settings. The overall goal is to develop sound management practices that can address the multiple and sometimes competing demands of stakeholders.

Designing a Successful Bidding Strategy Using Fuzzy Sets and Agent Attitudes

NASA Astrophysics Data System (ADS)

Ma, Jun; Goyal, Madhu Lata

To be successful in a multi-attribute auction, agents must be capable of adapting to continuously changing bidding price. This chapter presents a novel fuzzy attitude-based bidding strategy (FA-Bid), which employs dual assessment technique, i.e., assessment of multiple attributes of the goods as well as assessment of agents' attitude (eagerness) to procure an item in automated auction. The assessment of attributes adapts the fuzzy sets technique to handle uncertainty of the bidding process as well use heuristic rules to determine the attitude of bidding agents in simulated auctions to procure goods. The overall assessment is used to determine a price range based on current bid, which finally selects the best one as the new bid.

Trusted Advisors, Decision Models and Other Keys to Communicating Science to Decision Makers

NASA Astrophysics Data System (ADS)

Webb, E.

2006-12-01

Water resource management decisions often involve multiple parties engaged in contentious negotiations that try to navigate through complex combinations of legal, social, hydrologic, financial, and engineering considerations. The standard approach for resolving these issues is some form of multi-party negotiation, a formal court decision, or a combination of the two. In all these cases, the role of the decision maker(s) is to choose and implement the best option that fits the needs and wants of the community. However, each path to a decision carries the risk of technical and/or financial infeasibility as well as the possibility of unintended consequences. To help reduce this risk, decision makers often rely on some type of predictive analysis from which they can evaluate the projected consequences of their decisions. Typically, decision makers are supported in the analysis process by trusted advisors who engage in the analysis as well as the day to day tasks associated with multi-party negotiations. In the case of water resource management, the analysis is frequently a numerical model or set of models that can simulate various management decisions across multiple systems and output results that illustrate the impact on areas of concern. Thus, in order to communicate scientific knowledge to the decision makers, the quality of the communication between the analysts, the trusted advisor, and the decision maker must be clear and direct. To illustrate this concept, a multi-attribute decision analysis matrix will be used to outline the value of computer model-based collaborative negotiation approaches to guide water resources decision making and communication with decision makers. In addition, the critical role of the trusted advisor and other secondary participants in the decision process will be discussed using examples from recent water negotiations.

Podium: Ranking Data Using Mixed-Initiative Visual Analytics.

PubMed

Wall, Emily; Das, Subhajit; Chawla, Ravish; Kalidindi, Bharath; Brown, Eli T; Endert, Alex

2018-01-01

People often rank and order data points as a vital part of making decisions. Multi-attribute ranking systems are a common tool used to make these data-driven decisions. Such systems often take the form of a table-based visualization in which users assign weights to the attributes representing the quantifiable importance of each attribute to a decision, which the system then uses to compute a ranking of the data. However, these systems assume that users are able to quantify their conceptual understanding of how important particular attributes are to a decision. This is not always easy or even possible for users to do. Rather, people often have a more holistic understanding of the data. They form opinions that data point A is better than data point B but do not necessarily know which attributes are important. To address these challenges, we present a visual analytic application to help people rank multi-variate data points. We developed a prototype system, Podium, that allows users to drag rows in the table to rank order data points based on their perception of the relative value of the data. Podium then infers a weighting model using Ranking SVM that satisfies the user's data preferences as closely as possible. Whereas past systems help users understand the relationships between data points based on changes to attribute weights, our approach helps users to understand the attributes that might inform their understanding of the data. We present two usage scenarios to describe some of the potential uses of our proposed technique: (1) understanding which attributes contribute to a user's subjective preferences for data, and (2) deconstructing attributes of importance for existing rankings. Our proposed approach makes powerful machine learning techniques more usable to those who may not have expertise in these areas.

Development of a First-of-a-Kind Deterministic Decision-Making Tool for Supervisory Control System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cetiner, Sacit M; Kisner, Roger A; Muhlheim, Michael David

2015-07-01

Decision-making is the process of identifying and choosing alternatives where each alternative offers a different approach or path to move from a given state or condition to a desired state or condition. The generation of consistent decisions requires that a structured, coherent process be defined, immediately leading to a decision-making framework. The overall objective of the generalized framework is for it to be adopted into an autonomous decision-making framework and tailored to specific requirements for various applications. In this context, automation is the use of computing resources to make decisions and implement a structured decision-making process with limited or nomore » human intervention. The overriding goal of automation is to replace or supplement human decision makers with reconfigurable decision- making modules that can perform a given set of tasks reliably. Risk-informed decision making requires a probabilistic assessment of the likelihood of success given the status of the plant/systems and component health, and a deterministic assessment between plant operating parameters and reactor protection parameters to prevent unnecessary trips and challenges to plant safety systems. The implementation of the probabilistic portion of the decision-making engine of the proposed supervisory control system was detailed in previous milestone reports. Once the control options are identified and ranked based on the likelihood of success, the supervisory control system transmits the options to the deterministic portion of the platform. The deterministic multi-attribute decision-making framework uses variable sensor data (e.g., outlet temperature) and calculates where it is within the challenge state, its trajectory, and margin within the controllable domain using utility functions to evaluate current and projected plant state space for different control decisions. Metrics to be evaluated include stability, cost, time to complete (action), power level, etc. The integration of deterministic calculations using multi-physics analyses (i.e., neutronics, thermal, and thermal-hydraulics) and probabilistic safety calculations allows for the examination and quantification of margin recovery strategies. This also provides validation of the control options identified from the probabilistic assessment. Thus, the thermal-hydraulics analyses are used to validate the control options identified from the probabilistic assessment. Future work includes evaluating other possible metrics and computational efficiencies.« less

Sequence stratigraphy, seismic stratigraphy, and seismic structures of the lower intermediate confining unit and most of the Floridan aquifer system, Broward County, Florida

USGS Publications Warehouse

Cunningham, Kevin J.; Kluesner, Jared W.; Westcott, Richard L.; Robinson, Edward; Walker, Cameron; Khan, Shakira A.

2017-12-08

Deep well injection and disposal of treated wastewater into the highly transmissive saline Boulder Zone in the lower part of the Floridan aquifer system began in 1971. The zone of injection is a highly transmissive hydrogeologic unit, the Boulder Zone, in the lower part of the Floridan aquifer system. Since the 1990s, however, treated wastewater injection into the Boulder Zone in southeastern Florida has been detected at three treated wastewater injection utilities in the brackish upper part of the Floridan aquifer system designated for potential use as drinking water. At a time when usage of the Boulder Zone for treated wastewater disposal is increasing and the utilization of the upper part of the Floridan aquifer system for drinking water is intensifying, there is an urgency to understand the nature of cross-formational fluid flow and identify possible fluid pathways from the lower to upper zones of the Floridan aquifer system. To better understand the hydrogeologic controls on groundwater movement through the Floridan aquifer system in southeastern Florida, the U.S. Geological Survey and the Broward County Environmental Planning and Community Resilience Division conducted a 3.5-year cooperative study from July 2012 to December 2015. The study characterizes the sequence stratigraphy, seismic stratigraphy, and seismic structures of the lower part of the intermediate confining unit aquifer and most of the Floridan aquifer system.Data obtained to meet the study objective include 80 miles of high-resolution, two-dimensional (2D), seismic-reflection profiles acquired from canals in eastern Broward County. These profiles have been used to characterize the sequence stratigraphy, seismic stratigraphy, and seismic structures in a 425-square-mile study area. Horizon mapping of the seismic-reflection profiles and additional data collection from well logs and cores or cuttings from 44 wells were focused on construction of three-dimensional (3D) visualizations of eight sequence stratigraphic cycles that compose the Eocene to Miocene Oldsmar, Avon Park, and Arcadia Formations. The mapping of these seismic-reflection and well data has produced a refined Cenozoic sequence stratigraphic, seismic stratigraphic, and hydrogeologic framework of southeastern Florida. The upward transition from the Oldsmar Formation to the Avon Park Formation and the Arcadia Formation embodies the evolution from (1) a tropical to subtropical, shallow-marine, carbonate platform, represented by the Oldsmar and Avon Park Formations, to (2) a broad, temperate, mixed carbonate-siliciclastic shallow marine shelf, represented by the lower part of the Arcadia Formation, and to (3) a temperate, distally steepened carbonate ramp represented by the upper part of the Arcadia Formation.In the study area, the depositional sequences and seismic sequences have a direct correlation with hydrogeologic units. The approximate upper boundary of four principal permeable units of the Floridan aquifer system (Upper Floridan aquifer, Avon Park permeable zone, uppermost major permeable zone of the Lower Floridan aquifer, and Boulder Zone) have sequence stratigraphic and seismic-reflection signatures that were identified on cross sections, mapped, or both, and therefore the sequence stratigraphy and seismic stratigraphy were used to guide the development of a refined spatial representation of these hydrogeologic units. In all cases, the permeability of the four permeable units is related to stratiform megaporosity generated by ancient dissolution of carbonate rock associated with subaerial exposure and unconformities at the upper surfaces of carbonate depositional cycles of several hierarchical scales ranging from high-frequency cycles to depositional sequences. Additionally, interparticle porosity also contributes substantially to the stratiform permeability in much of the Upper Floridan aquifer. Information from seismic stratigraphy allowed 3D geomodeling of hydrogeologic units—an approach never before applied to this area. Notably, the 3D geomodeling provided 3D visualizations and geocellular models of the depositional sequences, hydrostratigraphy, and structural features. The geocellular data could be used to update the hydrogeologic structure inherent to groundwater flow simulations that are designed to address the sustainability of the water resources of the Floridan aquifer system.Two kinds of pathways that could enable upward cross-formational flow of injected treated wastewater from the Boulder Zone have been identified in the 80 miles of high-resolution seismic data collected for this study: a near-vertical reverse fault and karst collapse structures. The single reverse fault, inferred to be of tectonic origin, is in extreme northeastern Broward County and has an offset of about 19 feet at the level of the Arcadia Formation. Most of the 17 karst collapse structures identified manifest as columniform, vertically stacked sagging seismic reflections that span early Eocene to Miocene age rocks equivalent to much of the Floridan aquifer system and the lower part of the overlying intermediate confining unit. In some cases, the seismic-sag structures extend upward into strata of Pliocene age. The seismic-sag structures are interpreted to have a semicircular shape in plan view on the basis of comparison to (1) other seismic-sag structures in southeastern Florida mapped with two 2D seismic cross lines or 3D data, (2) comparison to these structures located in other carbonate provinces, and (3) plausible extensional ring faults detected with multi-attribute analysis. The seismic-sag structures in the study area have heights as great as 2,500 vertical feet, though importantly, one spans about 7,800 feet. Both multi-attribute analysis and visual detection of offset of seismic reflections within the seismic-sag structures indicate faults and fractures are associated with many of the structures. Multi-attribute analysis highlighting chimney fluid pathways also indicates that the seismic-sag structures have a high probability for potential vertical cross-formational fluid flow along the faulted and fractured structures. A collapse of the seismic-sag structures within a deep burial setting evokes an origin related to hypogenic karst processes by ascending flow of subsurface fluids. In addition, paleo-epigenic karst related to major regional subaerial unconformities within the Florida Platform generated collapse structures (paleo-sinkholes) that are much smaller in scale than the cross-formational seismic-sag structures.

Interactive 3D Visualization: An Important Element in Dealing with Increasing Data Volumes and Decreasing Resources

NASA Astrophysics Data System (ADS)

Gee, L.; Reed, B.; Mayer, L.

2002-12-01

Recent years have seen remarkable advances in sonar technology, positioning capabilities, and computer processing power that have revolutionized the way we image the seafloor. The US Naval Oceanographic Office (NAVOCEANO) has updated its survey vessels and launches to the latest generation of technology and now possesses a tremendous ocean observing and mapping capability. However, the systems produce massive amounts of data that must be validated prior to inclusion in various bathymetry, hydrography, and imagery products. The key to meeting the challenge of the massive data volumes was to change the approach that required every data point be viewed. This was achieved with the replacement of the traditional line-by-line editing approach with an automated cleaning module, and an area-based editor. The approach includes a unique data structure that enables the direct access to the full resolution data from the area based view, including a direct interface to target files and imagery snippets from mosaic and full resolution imagery. The increased data volumes to be processed also offered tremendous opportunities in terms of visualization and analysis, and interactive 3D presentation of the complex multi-attribute data provided a natural complement to the area based processing. If properly geo-referenced and treated, the complex data sets can be presented in a natural and intuitive manner that allows the integration of multiple components each at their inherent level of resolution and without compromising the quantitative nature of the data. Artificial sun-illumination, shading, and 3-D rendering are used with digital bathymetric data to form natural looking and easily interpretable, yet quantitative, landscapes that allow the user to rapidly identify the data requiring further processing or analysis. Color can be used to represent depth or other parameters (like backscatter, quality factors or sediment properties), which can be draped over the DTM, or high resolution imagery can be texture mapped on bathymetric data. The presentation will demonstrate the new approach of the integrated area based processing and 3D visualization with a number of data sets from recent surveys.

Multi-Attribute Selection of Coal Center Location: A Case Study in Thailand

NASA Astrophysics Data System (ADS)

Kuakunrittiwong, T.; Ratanakuakangwan, S.

2016-11-01

Under Power Development Plan 2015, Thailand has to diversify its heavily gas-fired electricity generation. The main owner of electricity transmission grids is responsible to implement several coal-fired power plants with clean coal technology. To environmentally handle and economically transport unprecedented quantities of sub-bituminous and bituminous coal, a coal center is required. The location of such facility is an important strategic decision and a paramount to the success of the energy plan. As site selection involves many criteria, Fuzzy Analytical Hierarchy Process or Fuzzy-AHP is applied to select the most suitable location among three candidates. Having analyzed relevant criteria and the potential alternatives, the result reveals that engineering and socioeconomic are important criteria and Map Ta Phut is the most suitable site for the coal center.

Alternative electrical distribution system architectures for automobiles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Afridi, K.K.; Tabors, R.D.; Kassakian, J.G.

At present most automobiles use a 12 V electrical system with point-to-point wiring. The capability of this architecture in meeting the needs of future electrical loads is questionable. Furthermore, with the development of electric vehicles (EVs) there is a greater need for a better architecture. In this paper the authors outline the limitations of the conventional architecture and identify alternatives. They also present a multi-attribute trade-off methodology which compares these alternatives, and identifies a set of Pareto optimal architectures. The system attributes traded off are cost, weight, losses and probability of failure. These are calculated by a computer program thatmore » has built-in component attribute models. System attributes of a few dozen architectures are also reported and the results analyzed. 17 refs.« less

Improving multi-tasking ability through action videogames.

PubMed

Chiappe, Dan; Conger, Mark; Liao, Janet; Caldwell, J Lynn; Vu, Kim-Phuong L

2013-03-01

The present study examined whether action videogames can improve multi-tasking in high workload environments. Two groups with no action videogame experience were pre-tested using the Multi-Attribute Task Battery (MATB). It consists of two primary tasks; tracking and fuel management, and two secondary tasks; systems monitoring and communication. One group served as a control group, while a second played action videogames a minimum of 5 h a week for 10 weeks. Both groups returned for a post-assessment on the MATB. We found the videogame treatment enhanced performance on secondary tasks, without interfering with the primary tasks. Our results demonstrate action videogames can increase people's ability to take on additional tasks by increasing attentional capacity. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

A decision support for an integrated multi-scale analysis of irrigation: DSIRR.

PubMed

Bazzani, Guido M

2005-12-01

The paper presents a decision support designed to conduct an economic-environmental assessment of the agricultural activity focusing on irrigation called 'Decision Support for IRRigated Agriculture' (DSIRR). The program describes the effect at catchment scale of choices taken at micro scale by independent actors, the farmers, by simulating their decision process. The decision support (DS) has been thought of as a support tool for participatory water policies as requested by the Water Framework Directive and it aims at analyzing alternatives in production and technology, according to different market, policy and climate conditions. The tool uses data and models, provides a graphical user interface and can incorporate the decision makers' own insights. Heterogeneity in preferences is admitted since it is assumed that irrigators try to optimize personal multi-attribute utility functions, subject to a set of constraints. Consideration of agronomic and engineering aspects allows an accurate description of irrigation. Mathematical programming techniques are applied to find solutions. The program has been applied in the river Po basin (northern Italy) to analyze the impact of a pricing policy in a context of irrigation technology innovation. Water demand functions and elasticity to water price have been estimated. Results demonstrate how different areas and systems react to the same policy in quite a different way. While in the annual cropping system pricing seems effective to save the resource at the cost of impeding Water Agencies cost recovery, the same policy has an opposite effect in the perennial fruit system which shows an inelastic response to water price. The multidimensional assessment conducted clarified the trades-off among conflicting economic-social-environmental objectives, thus generating valuable information to design a more tailored mix of measures.

Family involvement in medical decision-making: Perceptions of nursing and psychology students.

PubMed

Itzhaki, Michal; Hildesheimer, Galya; Barnoy, Sivia; Katz, Michael

2016-05-01

Family members often rely on health care professionals to guide and support them through the decision-making process. Although family involvement in medical decisions should be included in the preservice curriculum for the health care professions, perceptions of students in caring professions on family involvement in medical decision-making have not yet been examined. To examine the perceptions of nursing and psychology students on family involvement in medical decision-making for seriously ill patients. A descriptive cross-sectional design was used. First year undergraduate nursing and psychology students studying for their Bachelor of Arts degree were recruited. Perceptions were assessed with a questionnaire constructed based on the Multi-Attribute Utility Theory (MAUT), which examines decision-maker preferences. The questionnaire consisted of two parts referring to the respondent once as the patient and then as the family caregiver. Questionnaires were completed by 116 nursing students and 156 psychology students. Most were of the opinion that family involvement in decision-making is appropriate, especially when the patient is incapable of making decisions. Nursing students were more inclined than psychology students to think that financial, emotional, and value-based considerations should be part of the family's involvement in decision-making. Both groups of students perceived the emotional consideration as most acceptable, whereas the financial consideration was considered the least acceptable. Nursing and psychology students perceive family involvement in medical decision-making as appropriate. In order to train students to support families in the process of decision-making, further research should examine Shared Decision-Making (SDM) programs, which involve patient and clinician collaboration in health care decisions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Responding to Vaccine Safety Signals during Pandemic Influenza: A Modeling Study

PubMed Central

Maro, Judith C.; Fryback, Dennis G.; Lieu, Tracy A.; Lee, Grace M.; Martin, David B.

2014-01-01

Background Managing emerging vaccine safety signals during an influenza pandemic is challenging. Federal regulators must balance vaccine risks against benefits while maintaining public confidence in the public health system. Methods We developed a multi-criteria decision analysis model to explore regulatory decision-making in the context of emerging vaccine safety signals during a pandemic. We simulated vaccine safety surveillance system capabilities and used an age-structured compartmental model to develop potential pandemic scenarios. We used an expert-derived multi-attribute utility function to evaluate potential regulatory responses by combining four outcome measures into a single measure of interest: 1) expected vaccination benefit from averted influenza; 2) expected vaccination risk from vaccine-associated febrile seizures; 3) expected vaccination risk from vaccine-associated Guillain-Barre Syndrome; and 4) expected change in vaccine-seeking behavior in future influenza seasons. Results Over multiple scenarios, risk communication, with or without suspension of vaccination of high-risk persons, were the consistently preferred regulatory responses over no action or general suspension when safety signals were detected during a pandemic influenza. On average, the expert panel valued near-term vaccine-related outcomes relative to long-term projected outcomes by 3∶1. However, when decision-makers had minimal ability to influence near-term outcomes, the response was selected primarily by projected impacts on future vaccine-seeking behavior. Conclusions The selected regulatory response depends on how quickly a vaccine safety signal is identified relative to the peak of the pandemic and the initiation of vaccination. Our analysis suggested two areas for future investment: efforts to improve the size and timeliness of the surveillance system and behavioral research to understand changes in vaccine-seeking behavior. PMID:25536228

Vision and Quality of Life Index: validation of the Indian version using Rasch analysis.

PubMed

Gothwal, Vijaya K; Bagga, Deepak K

2013-07-18

A multi-attribute utility instrument (MAUI) consists of a descriptive system in which the items and responses seek information about a concept of the universe of health-related quality of life (QoL), and responses to these items then are weighted and combined to produce the index. To our knowledge, the 6-item Vision and Quality of Life Index (VisQoL) is the only available vision-related MAUI, developed and validated in Australia, specifically for visually impaired (VI) populations. To our knowledge, the psychometric properties of the VisQoL have not yet been investigated in an Indian VI sample; this was the aim of our study. The Indian VisQoL was administered to 349 VI adults face-to-face by a trained interviewer at the Vision Rehabilitation Centres of a tertiary eye care facility, South India. Rasch analysis was used to assess the psychometric properties. Rescoring was necessary for all except one item before ordered thresholds were obtained. All items fit the Rasch model and unidimensionality was confirmed. Person separation was acceptable (2.01), indicating that the instrument can discriminate among three strata of participants" vision-related QoL (VRQoL). The VisQoL items were targeted substantially to the participants" VRQoL (-0.69 logits). One item ("ability to have friendships") demonstrated large differential item functioning by work status; working participants reported the item to be more difficult (-1.13 logits) relative to other items when compared to the nonworking participants. The 6-item Indian VisQoL satisfies unidimensional Rasch model expectations in VI patients. Disordering of response categories was evident; replication is required before a common rescoring option should be considered.

Seismic Reservoir Characterization for Assessment of CO2 EOR at the Mississippian Reservoir in South-Central Kansas

NASA Astrophysics Data System (ADS)

Tsoflias, G. P.; Graham, B.; Haga, L.; Watney, L.

2017-12-01

The Mississippian in Kansas and Oklahoma is a highly heterogeneous, fractured, oil producing reservoir with thickness typically below seismic resolution. At Wellington field in south-central Kansas CO2 was injected in the Mississippian reservoir for enhanced oil recovery. This study examines the utility of active source surface seismic for characterization of Mississippian reservoir properties and monitoring CO2. Analysis of post-stack 3D seismic data showed the expected response of a gradational transition (ramp velocity) where thicker reservoir units corresponded with lower reflection amplitudes, lower frequency and a 90o phase change. Reflection amplitude could be correlated to reservoir thickness. Pre-stack gather analysis showed that porosity zones of the Mississippian reservoir exhibit characteristic AVO response. Simultaneous AVO inversion estimated P- and S-Impedances, which along with formation porosity logs and post-stack seismic data attributes were incorporated in multi-attribute linear-regression analysis and predicted reservoir porosity with an overall correlation of 0.90 to well data. The 3D survey gather azimuthal anisotropy analysis (AVAZ) provided information on the fault and fracture network and showed good agreement to the regional stress field and well data. Mississippian reservoir porosity and fracture predictions agreed well with the observed mobility of the CO2 in monitoring wells. Fluid substitution modeling predicted acoustic impedance reduction in the Mississippian carbonate reservoir introduced by the presence of CO2. Future work includes the assessment of time-lapse seismic, acquired after the injection of CO2. This work demonstrates that advanced seismic interpretation methods can be used successfully for characterization of the Mississippian reservoir and monitoring of CO2.

Identification of drivers of (dis)liking based on dynamic sensory profiles: Comparison of Temporal Dominance of Sensations and Temporal Check-all-that-apply.

PubMed

Ares, Gastón; Alcaire, Florencia; Antúnez, Lucía; Vidal, Leticia; Giménez, Ana; Castura, John C

2017-02-01

Temporal Dominance of Sensations (TDS) and Temporal Check-all-that-apply (TCATA) are two multi-attribute methods for dynamic sensory characterization. Previous research has shown that both methodologies provide complementary information. However, it remains an open question which of the two approaches better explains consumers' hedonic perception of products. In this context, the aim of the present work was to compare TDS and TCATA in terms of their ability to identify the influence of the dynamic sensory profile of food products on consumer overall liking scores. Two consumer studies were conducted using two different product categories (French bread and vanilla milk desserts). In each study, a between-subjects design was used to obtain dynamic sensory profiles using TDS and TCATA. After the dynamic sensory characterization tasks consumers rated their liking using a 9-point hedonic scale. Across the two studies, both methodologies provided similar information on the main drivers of liking and disliking, particularly when samples showed clear differences in liking. However, in one of the studies attribute applicability from TCATA provided additional insights on the influence of the dynamics of the sensory characteristics of products on consumers' liking. Results of the present work stress the complementarity between TCATA and TDS and highlight the potentiality of TCATA to provide a more detailed description of the dynamics of sensory perception during consumption. Copyright © 2016 Elsevier Ltd. All rights reserved.

Treatment of Children's Fears: A Strategic Utilization Approach.

ERIC Educational Resources Information Center

Protinsky, Howard

1985-01-01

Describes briefly Milton Erickson's strategic utilization approach to therapy. Discusses the usefulness of this approach in treating children's fears. Presents two case histories in which the approach successfully eliminated the fear of the child. (BH)

75 FR 51806 - Climate Change Vulnerability Assessment: Four Case Studies of Water Utility Practices

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-23

... case studies describing the approaches currently being taken by four water utilities to assess their... series of case studies describing the approaches currently being taken by four water utilities in the... Vulnerability Assessment: Four Case Studies of Water Utility Practices AGENCY: Environmental Protection Agency...

Comparative SWOT analysis of strategic environmental assessment systems in the Middle East and North Africa region.

PubMed

Rachid, G; El Fadel, M

2013-08-15

This paper presents a SWOT analysis of SEA systems in the Middle East North Africa region through a comparative examination of the status, application and structure of existing systems based on country-specific legal, institutional and procedural frameworks. The analysis is coupled with the multi-attribute decision making method (MADM) within an analytical framework that involves both performance analysis based on predefined evaluation criteria and countries' self-assessment of their SEA system through open-ended surveys. The results show heterogenous status with a general delayed progress characterized by varied levels of weaknesses embedded in the legal and administrative frameworks and poor integration with the decision making process. Capitalizing on available opportunities, the paper highlights measures to enhance the development and enactment of SEA in the region. Copyright © 2013 Elsevier Ltd. All rights reserved.

Temporal Drivers of Liking Based on Functional Data Analysis and Non-Additive Models for Multi-Attribute Time-Intensity Data of Fruit Chews.

PubMed

Kuesten, Carla; Bi, Jian

2018-06-03

Conventional drivers of liking analysis was extended with a time dimension into temporal drivers of liking (TDOL) based on functional data analysis methodology and non-additive models for multiple-attribute time-intensity (MATI) data. The non-additive models, which consider both direct effects and interaction effects of attributes to consumer overall liking, include Choquet integral and fuzzy measure in the multi-criteria decision-making, and linear regression based on variance decomposition. Dynamics of TDOL, i.e., the derivatives of the relative importance functional curves were also explored. Well-established R packages 'fda', 'kappalab' and 'relaimpo' were used in the paper for developing TDOL. Applied use of these methods shows that the relative importance of MATI curves offers insights for understanding the temporal aspects of consumer liking for fruit chews.

[Utilities: a solution of a decision problem?].

PubMed

Koller, Michael; Ohmann, Christian; Lorenz, Wilfried

2008-01-01

Utility is a concept that originates from utilitarianism, a highly influential philosophical school in the Anglo-American world. The cornerstone of utilitarianism is the principle of maximum happiness or utility. In the medical sciences, this utility approach has been adopted and developed within the field of medical decision making. On an operational level, utility is the evaluation of a health state or an outcome on a one-dimensional scale ranging from 0 (death) to 1 (perfect health). By adding the concept of expectancy, the graphic representation of both concepts in a decision tree results in the specification of expected utilities and helps to resolve complex medical decision problems. Criticism of the utility approach relates to the rational perspective on humans (which is rejected by a considerable fraction of research in psychology) and to the artificial methods used in the evaluation of utility, such as Standard Gamble or Time Trade Off. These may well be the reason why the utility approach has never been accepted in Germany. Nevertheless, innovative concepts for defining goals in health care are urgently required, as the current debate in Germany on "Nutzen" (interestingly translated as 'benefit' instead of as 'utility') and integrated outcome models indicates. It remains to be seen whether this discussion will lead to a re-evaluation of the utility approach.

The South Florida Ecosystem Portfolio Model - A Map-Based Multicriteria Ecological, Economic, and Community Land-Use Planning Tool

USGS Publications Warehouse

Labiosa, William B.; Bernknopf, Richard; Hearn, Paul; Hogan, Dianna; Strong, David; Pearlstine, Leonard; Mathie, Amy M.; Wein, Anne M.; Gillen, Kevin; Wachter, Susan

2009-01-01

The South Florida Ecosystem Portfolio Model (EPM) prototype is a regional land-use planning Web tool that integrates ecological, economic, and social information and values of relevance to decision-makers and stakeholders. The EPM uses a multicriteria evaluation framework that builds on geographic information system-based (GIS) analysis and spatially-explicit models that characterize important ecological, economic, and societal endpoints and consequences that are sensitive to regional land-use/land-cover (LULC) change. The EPM uses both economics (monetized) and multiattribute utility (nonmonetized) approaches to valuing these endpoints and consequences. This hybrid approach represents a methodological middle ground between rigorous economic and ecological/ environmental scientific approaches. The EPM sacrifices some degree of economic- and ecological-forecasting precision to gain methodological transparency, spatial explicitness, and transferability, while maintaining credibility. After all, even small steps in the direction of including ecosystem services evaluation are an improvement over current land-use planning practice (Boyd and Wainger, 2003). There are many participants involved in land-use decision-making in South Florida, including local, regional, State, and Federal agencies, developers, environmental groups, agricultural groups, and other stakeholders (South Florida Regional Planning Council, 2003, 2004). The EPM's multicriteria evaluation framework is designed to cut across the objectives and knowledge bases of all of these participants. This approach places fundamental importance on social equity and stakeholder participation in land-use decision-making, but makes no attempt to determine normative socially 'optimal' land-use plans. The EPM is thus a map-based set of evaluation tools for planners and stakeholders to use in their deliberations of what is 'best', considering a balancing of disparate interests within a regional perspective. Although issues of regional ecological sustainability can be explored with the EPM (for example, changes in biodiversity potential and regional habitat fragmentation), it does not attempt to define or evaluate long-term ecological sustainability as such. Instead, the EPM is intended to provide transparent first-order indications of the direction of ecological, economic, and community change, not to make detailed predictions of ecological, economic, and social outcomes. In short, the EPM is an attempt to widen the perspectives of its users by integrating natural and social scientific information in a framework that recognizes the diversity of values at stake in South Florida land-use planning. For terrestrial ecosystems, land-cover change is one of the most important direct drivers of changes in ecosystem services (Hassan and others, 2005). More specifically, the fragmentation of habitat from expanding low-density development across landscapes appears to be a major driver of terrestrial species decline and the impairment of terrestrial ecosystem integrity, in some cases causing irreversible impairment from a land-use planning perspective (Brody, 2008; Peck, 1998). Many resource managers and land-use planners have come to realize that evaluating land-use conversions on a parcel-by-parcel basis leads to a fragmented and narrow view of the regional effects of natural land-cover loss to development (Marsh and Lallas, 1995). The EPM is an attempt to integrate important aspects of the coupled natural-system/human-system view from a regional planning perspective. The EPM evaluates proposed land-use changes, both conversion and intensification, in terms of relevant ecological, economic, and social criteria that combine information about probable land-use outcomes, based on ecological and environmental models, as well as value judgments, as expressed in user-modifiable preference models. Based on on-going meetings and interviews with stakeholders and potential tool users we foc

Preferences and Utilities for Health States after Treatment of Olfactory Groove Meningioma: Endoscopic versus Open.

PubMed

Yao, Christopher M; Kahane, Alyssa; Monteiro, Eric; Gentili, Fred; Zadeh, Gelareh; de Almeida, John R

2017-08-01

Objectives  The purpose of this study is to report health utility scores for patients with olfactory groove meningiomas (OGM) treated with either the standard transcranial approach, or the expanded endonasal endoscopic approach. Design  The time trade-off technique was used to derive health utility scores. Setting  Healthy individuals without skull base tumors were surveyed. Main Outcome Measures  Participants reviewed and rated scenarios describing treatment (endoscopic, open, stereotactic radiation, watchful waiting), remission, recurrence, and complications associated with the management of OGMs. Results  There were 51 participants. The endoscopic approach was associated with higher utility scores compared with an open craniotomy approach (0.88 vs. 0.74; p  < 0.001) and watchful waiting (0.88 vs.0.74; p  = 0.002). If recurrence occurred, revision endoscopic resection continued to have a higher utility score compared with revision open craniotomy (0.68; p  = 0.008). On multivariate analysis, older individuals were more likely to opt for watchful waiting ( p  = 0.001), whereas participants from higher income brackets were more likely to rate stereotactic radiosurgery with higher utility scores ( p  = 0.017). Conclusion  The endoscopic approach was associated with higher utility scores than craniotomy for primary and revision cases. The present utilities can be used for future cost-utility analyses.

Current and Emerging Technology Approaches in Genomics

PubMed Central

Conley, Yvette P.; Biesecker, Leslie G.; Gonsalves, Stephen; Merkle, Carrie J.; Kirk, Maggie; Aouizerat, Bradley E.

2013-01-01

Purpose To introduce current and emerging approaches that are being utilized in the field of genomics so the reader can conceptually evaluate the literature and appreciate how these approaches are advancing our understanding of health-related issues. Organizing Construct Each approach is described and includes information related to how it is advancing research, its potential clinical utility, exemplars of current uses, challenges related to technologies used for these approaches, and when appropriate information related to understanding the evidence base for clinical utilization of each approach is provided. Web-based resources are included for the reader who would like more in-depth information and to provide opportunity to stay up to date with these approaches and their utility. Conclusions The chosen approaches– genome sequencing, genome-wide association studies, epigenomics, and gene expression– are extremely valuable approaches for collecting research data to help us better understand the pathophysiology of a variety of health-related conditions, but they are also gaining in utility for clinical assessment and testing purposes. Clinical Relevance Our increased understanding of the molecular underpinnings of disease will assist with better development of screening tests, diagnostic tests, tests that allow us to prognosticate, tests that allow for individualized treatments, and tests to facilitate post-treatment surveillance. PMID:23294727

Enhancing data utilization through adoption of cloud-based data architectures (Invited Paper 211869)

NASA Astrophysics Data System (ADS)

Kearns, E. J.

2017-12-01

A traditional approach to data distribution and utilization of open government data involves continuously moving those data from a central government location to each potential user, who would then utilize them on their local computer systems. An alternate approach would be to bring those users to the open government data, where users would also have access to computing and analytics capabilities that would support data utilization. NOAA's Big Data Project is exploring such an alternate approach through an experimental collaboration with Amazon Web Services, Google Cloud Platform, IBM, Microsoft Azure, and the Open Commons Consortium. As part of this ongoing experiment, NOAA is providing open data of interest which are freely hosted by the Big Data Project Collaborators, who provide a variety of cloud-based services and capabilities to enable utilization by data users. By the terms of the agreement, the Collaborators may charge for those value-added services and processing capacities to recover their costs to freely host the data and to generate profits if so desired. Initial results have shown sustained increases in data utilization from 2 to over 100 times previously-observed access patterns from traditional approaches. Significantly increased utilization speed as compared to the traditional approach has also been observed by NOAA data users who have volunteered their experiences on these cloud-based systems. The potential for implementing and sustaining the alternate cloud-based approach as part of a change in operational data utilization strategies will be discussed.

A decision support tool to prioritize risk management options for contaminated sites.

PubMed

Sorvari, Jaana; Seppälä, Jyri

2010-03-15

The decisions on risk management (RM) of contaminated sites in Finland have typically been driven by practical factors such as time and money. However, RM is a multifaceted task that generally involves several additional determinants, e.g. performance and environmental effects of remediation methods, psychological and social factors. Therefore, we adopted a multi-criteria decision analysis approach and developed a decision support tool (DST) that is viable in decision-making in such a complex situation. The basic components of the DST are based on the Dutch REC system. However, our DST is more case-specific and allows the consideration of the type, magnitude and scale of contamination, land use, environmental conditions and socio-cultural aspects (e.g. loss of cultural heritage, image aspects). The construction of the DST was started by structuring the decision problem using a value tree. Based on this work we adopted the Multi-Attribute Value Theory (MAVT) for data aggregation. The final DST was demonstrated by two model sites for which the RM alternatives and site-specific data were created on the basis of factual remediation projects and by interviewing experts. The demonstration of the DST was carried out in a workshop where representatives of different stakeholders were requested to rank and weight the decision criteria involved. To get information on the consistency of the ranking of the RM alternatives, we used different weighting techniques (ratio estimation and pair-wise weighting) and alternative ways to treat individual respondents' weights in calculating the preference scores for each RM alternative. These dissimilar approaches resulted in some differences in the preference order of the RM alternatives. The demonstration showed that attention has to be paid to the proper description of the site, the principles of the procedure and the decision criteria. Nevertheless, the procedure proved to enable efficient communication between different stakeholders and the identification of the preferred RM option.

A Practical Guide to Conducting a Systematic Review and Meta-analysis of Health State Utility Values.

PubMed

Petrou, Stavros; Kwon, Joseph; Madan, Jason

2018-05-10

Economic analysts are increasingly likely to rely on systematic reviews and meta-analyses of health state utility values to inform the parameter inputs of decision-analytic modelling-based economic evaluations. Beyond the context of economic evaluation, evidence from systematic reviews and meta-analyses of health state utility values can be used to inform broader health policy decisions. This paper provides practical guidance on how to conduct a systematic review and meta-analysis of health state utility values. The paper outlines a number of stages in conducting a systematic review, including identifying the appropriate evidence, study selection, data extraction and presentation, and quality and relevance assessment. The paper outlines three broad approaches that can be used to synthesise multiple estimates of health utilities for a given health state or condition, namely fixed-effect meta-analysis, random-effects meta-analysis and mixed-effects meta-regression. Each approach is illustrated by a synthesis of utility values for a hypothetical decision problem, and software code is provided. The paper highlights a number of methodological issues pertinent to the conduct of meta-analysis or meta-regression. These include the importance of limiting synthesis to 'comparable' utility estimates, for example those derived using common utility measurement approaches and sources of valuation; the effects of reliance on limited or poorly reported published data from primary utility assessment studies; the use of aggregate outcomes within analyses; approaches to generating measures of uncertainty; handling of median utility values; challenges surrounding the disentanglement of utility estimates collected serially within the context of prospective observational studies or prospective randomised trials; challenges surrounding the disentanglement of intervention effects; and approaches to measuring model validity. Areas of methodological debate and avenues for future research are highlighted.

NNP-LANL Utilities - Condition Assessment and Project Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stewart, Grant Lorenz

2017-11-21

This report is a presentation on LANL Utilities & Transportation Asset Management; Utility Assets Overview; Condition Assessment; Utilities Project Nominations & Ranking; and Utilities Project Execution.

The eyes have it: Using eye tracking to inform information processing strategies in multi-attributes choices.

PubMed

Ryan, Mandy; Krucien, Nicolas; Hermens, Frouke

2018-04-01

Although choice experiments (CEs) are widely applied in economics to study choice behaviour, understanding of how individuals process attribute information remains limited. We show how eye-tracking methods can provide insight into how decisions are made. Participants completed a CE, while their eye movements were recorded. Results show that although the information presented guided participants' decisions, there were also several processing biases at work. Evidence was found of (a) top-to-bottom, (b) left-to-right, and (c) first-to-last order biases. Experimental factors-whether attributes are defined as "best" or "worst," choice task complexity, and attribute ordering-also influence information processing. How individuals visually process attribute information was shown to be related to their choices. Implications for the design and analysis of CEs and future research are discussed. Copyright © 2017 John Wiley & Sons, Ltd.

Automatic Generation of Heuristics for Scheduling

NASA Technical Reports Server (NTRS)

Morris, Robert A.; Bresina, John L.; Rodgers, Stuart M.

1997-01-01

This paper presents a technique, called GenH, that automatically generates search heuristics for scheduling problems. The impetus for developing this technique is the growing consensus that heuristics encode advice that is, at best, useful in solving most, or typical, problem instances, and, at worst, useful in solving only a narrowly defined set of instances. In either case, heuristic problem solvers, to be broadly applicable, should have a means of automatically adjusting to the idiosyncrasies of each problem instance. GenH generates a search heuristic for a given problem instance by hill-climbing in the space of possible multi-attribute heuristics, where the evaluation of a candidate heuristic is based on the quality of the solution found under its guidance. We present empirical results obtained by applying GenH to the real world problem of telescope observation scheduling. These results demonstrate that GenH is a simple and effective way of improving the performance of an heuristic scheduler.

Multi-Attribute Strategy and Performance Architectures in R&D: The Case of The Balanced Scorecard

DTIC Science & Technology

2006-03-01

learning.    We also found that balance, accessibility, transparency, and participation are increasingly  being  seen  as desirable features of the strategy...project would have never  seen  the light of the day. I am especially  thankful to Steven Popper for giving me the confidence to take on this challenging...among a ranking of 16 R&D  related problems perceived by the members for two years, 1993 & 1995 (Ellis, 1997.)  Traditionally R&D was  seen  as a rather

Spaceborne power systems preference analyses. Volume 2: Decision analysis

NASA Technical Reports Server (NTRS)

Smith, J. H.; Feinberg, A.; Miles, R. F., Jr.

1985-01-01

Sixteen alternative spaceborne nuclear power system concepts were ranked using multiattribute decision analysis. The purpose of the ranking was to identify promising concepts for further technology development and the issues associated with such development. Four groups were interviewed to obtain preference. The four groups were: safety, systems definition and design, technology assessment, and mission analysis. The highest ranked systems were the heat-pipe thermoelectric systems, heat-pipe Stirling, in-core thermionic, and liquid-metal thermoelectric systems. The next group contained the liquid-metal Stirling, heat-pipe Alkali Metal Thermoelectric Converter (AMTEC), heat-pipe Brayton, liquid-metal out-of-core thermionic, and heat-pipe Rankine systems. The least preferred systems were the liquid-metal AMTEC, heat-pipe thermophotovoltaic, liquid-metal Brayton and Rankine, and gas-cooled Brayton. The three nonheat-pipe technologies selected matched the top three nonheat-pipe systems ranked by this study.

The Elasticity of Preferences.

PubMed

Simon, Dan; Spiller, Stephen A

2016-12-01

We explore how preferences for attributes are constructed when people choose between multiattribute options. As found in prior research, we observed that while people make decisions, their preferences for the attributes in question shift to support the emerging choice, thus enabling confident decisions. The novelty of the studies reported here is that participants repeated the same task 6 to 8 weeks later. We found that between tasks, preferences returned to near their original levels, only to shift again to support the second choice, regardless of which choice participants made. Similar patterns were observed in a free-choice task (Study 1) and when the favorableness of options was manipulated (Study 2). It follows that preferences behave in an elastic manner: In the absence of situational pressures, they rest at baseline levels, but during the process of reaching a decision, they morph to support the chosen options. This elasticity appears to facilitate confident decision making in the face of decisional conflict.

Framing of task performance strategies: effects on performance in a multiattribute dynamic decision making environment.

PubMed

Nygren, T E

1997-09-01

It is well documented that the way a static choice task is "framed" can dramatically alter choice behavior, often leading to observable preference reversals. This framing effect appears to result from perceived changes in the nature or location of a person's initial reference point, but it is not clear how framing effects might generalize to performance on dynamic decision making tasks that are characterized by high workload, time constraints, risk, or stress. A study was conducted to examine the hypothesis that framing can introduce affective components to the decision making process and can influence, either favorably (positive frame) or adversely (negative frame), the implementation and use of decision making strategies in dynamic high-workload environments. Results indicated that negative frame participants were significantly impaired in developing and employing a simple optimal decision strategy relative to a positive frame group. Discussion focuses on implications of these results for models of dynamic decision making.

Salience driven value integration explains decision biases and preference reversal

PubMed Central

Tsetsos, Konstantinos; Chater, Nick; Usher, Marius

2012-01-01

Human choice behavior exhibits many paradoxical and challenging patterns. Traditional explanations focus on how values are represented, but little is known about how values are integrated. Here we outline a psychophysical task for value integration that can be used as a window on high-level, multiattribute decisions. Participants choose between alternative rapidly presented streams of numerical values. By controlling the temporal distribution of the values, we demonstrate that this process underlies many puzzling choice paradoxes, such as temporal, risk, and framing biases, as well as preference reversals. These phenomena can be explained by a simple mechanism based on the integration of values, weighted by their salience. The salience of a sampled value depends on its temporal order and momentary rank in the decision context, whereas the direction of the weighting is determined by the task framing. We show that many known choice anomalies may arise from the microstructure of the value integration process. PMID:22635271

Grey Language Hesitant Fuzzy Group Decision Making Method Based on Kernel and Grey Scale

PubMed Central

Diao, Yuzhu; Hu, Aqin

2018-01-01

Based on grey language multi-attribute group decision making, a kernel and grey scale scoring function is put forward according to the definition of grey language and the meaning of the kernel and grey scale. The function introduces grey scale into the decision-making method to avoid information distortion. This method is applied to the grey language hesitant fuzzy group decision making, and the grey correlation degree is used to sort the schemes. The effectiveness and practicability of the decision-making method are further verified by the industry chain sustainable development ability evaluation example of a circular economy. Moreover, its simplicity and feasibility are verified by comparing it with the traditional grey language decision-making method and the grey language hesitant fuzzy weighted arithmetic averaging (GLHWAA) operator integration method after determining the index weight based on the grey correlation. PMID:29498699

Grey Language Hesitant Fuzzy Group Decision Making Method Based on Kernel and Grey Scale.

PubMed

Li, Qingsheng; Diao, Yuzhu; Gong, Zaiwu; Hu, Aqin

2018-03-02

Based on grey language multi-attribute group decision making, a kernel and grey scale scoring function is put forward according to the definition of grey language and the meaning of the kernel and grey scale. The function introduces grey scale into the decision-making method to avoid information distortion. This method is applied to the grey language hesitant fuzzy group decision making, and the grey correlation degree is used to sort the schemes. The effectiveness and practicability of the decision-making method are further verified by the industry chain sustainable development ability evaluation example of a circular economy. Moreover, its simplicity and feasibility are verified by comparing it with the traditional grey language decision-making method and the grey language hesitant fuzzy weighted arithmetic averaging (GLHWAA) operator integration method after determining the index weight based on the grey correlation.

Evaluation of 3-D graphics software: A case study

NASA Technical Reports Server (NTRS)

Lores, M. E.; Chasen, S. H.; Garner, J. M.

1984-01-01

An efficient 3-D geometry graphics software package which is suitable for advanced design studies was developed. The advanced design system is called GRADE--Graphics for Advanced Design. Efficiency and ease of use are gained by sacrificing flexibility in surface representation. The immediate options were either to continue development of GRADE or to acquire a commercially available system which would replace or complement GRADE. Test cases which would reveal the ability of each system to satisfy the requirements were developed. A scoring method which adequately captured the relative capabilities of the three systems was presented. While more complex multi-attribute decision methods could be used, the selected method provides all the needed information without being so complex that it is difficult to understand. If the value factors are modestly perturbed, system Z is a clear winner based on its overall capabilities. System Z is superior in two vital areas: surfacing and ease of interface with application programs.

[Digital radiography in young children. Considerations based on experiences in practice].

PubMed

Berkhout, W E R; Mileman, P A; Weerheijm, K L

2004-10-01

In dentistry, digital radiology techniques, such as a charge-coupled device and a storage phosphor plate, are gaining popularity. It was the objective of this study to assess the importance of the advantages and disadvantages of digital radiology techniques for bitewing radiography in young children, when compared to conventional film. A group of dentists received a questionnaire regarding their experiences with digital radiology techniques or conventional films among young children. Using the Simple Multi-Attributive Rating Technique (SMART) a final weighted score was calculated for the charge-coupled device, the phosphor plate, and conventional film. The scores were 7.40, 7.38, and 6.98 respectively. The differences were not statistically significant (p > 0.47). It could be concluded that, on the basis of experiences in practice, there are no statistically significant preferences for the use of digital radioogy techniques for bitewing radiography in young children.

Multi-attribute subjective evaluations of manual tracking tasks vs. objective performance of the human operator

NASA Technical Reports Server (NTRS)

Siapkaras, A.

1977-01-01

A computational method to deal with the multidimensional nature of tracking and/or monitoring tasks is developed. Operator centered variables, including the operator's perception of the task, are considered. Matrix ratings are defined based on multidimensional scaling techniques and multivariate analysis. The method consists of two distinct steps: (1) to determine the mathematical space of subjective judgements of a certain individual (or group of evaluators) for a given set of tasks and experimental conditionings; and (2) to relate this space with respect to both the task variables and the objective performance criteria used. Results for a variety of second-order trackings with smoothed noise-driven inputs indicate that: (1) many of the internally perceived task variables form a nonorthogonal set; and (2) the structure of the subjective space varies among groups of individuals according to the degree of familiarity they have with such tasks.

Case Studies of Water Utility Climate Change Vulnerability Assessment [External Review Draft Report

EPA Science Inventory

This report presents a series of case studies describing the approaches taken by four water utilities in the United States to assess their vulnerability to climate change. The report is not intended to be a comprehensive listing of assessment approaches or utilities conducting v...

Economic and environmental optimization of a multi-site utility network for an industrial complex.

PubMed

Kim, Sang Hun; Yoon, Sung-Geun; Chae, Song Hwa; Park, Sunwon

2010-01-01

Most chemical companies consume a lot of steam, water and electrical resources in the production process. Given recent record fuel costs, utility networks must be optimized to reduce the overall cost of production. Environmental concerns must also be considered when preparing modifications to satisfy the requirements for industrial utilities, since wastes discharged from the utility networks are restricted by environmental regulations. Construction of Eco-Industrial Parks (EIPs) has drawn attention as a promising approach for retrofitting existing industrial parks to improve energy efficiency. The optimization of the utility network within an industrial complex is one of the most important undertakings to minimize energy consumption and waste loads in the EIP. In this work, a systematic approach to optimize the utility network of an industrial complex is presented. An important issue in the optimization of a utility network is the desire of the companies to achieve high profits while complying with the environmental regulations. Therefore, the proposed optimization was performed with consideration of both economic and environmental factors. The proposed approach consists of unit modeling using thermodynamic principles, mass and energy balances, development of a multi-period Mixed Integer Linear Programming (MILP) model for the integration of utility systems in an industrial complex, and an economic/environmental analysis of the results. This approach is applied to the Yeosu Industrial Complex, considering seasonal utility demands. The results show that both the total utility cost and waste load are reduced by optimizing the utility network of an industrial complex. 2009 Elsevier Ltd. All rights reserved.

Sustainable development through biomass utilization: A practical approach

Treesearch

Ravi Malhotra

2008-01-01

(Please note, this is an abstract only) This paper is for folks involved in community development efforts targeted towards biomass utilization. Our approach to evaluate the potential for establishing enterprises that utilize locally available forest resources is tailored specifically to the needs of the local community. We evaluate the: 1. Technical feasibility and...

When performance-approach goals predict academic achievement and when they do not: a social value approach.

PubMed

Dompnier, Benoît; Darnon, Céline; Butera, Fabrizio

2013-09-01

Research on achievement goal promotion at University has shown that performance-approach goals are perceived as a means to succeed at University (high social utility) but are not appreciated (low social desirability). We argue that such a paradox could explain why research has detected that performance-approach goals consistently predict academic grades. First-year psychology students answered a performance-approach goal scale with standard, social desirability and social utility instructions. Participants' grades were recorded at the end of the semester. Results showed that the relationship between performance-approach goals and grades was inhibited by the increase of these goals' social desirability and facilitated by the increase of their social utility, revealing that the predictive validity of performance-approach goals depends on social value. © 2013 The British Psychological Society.

Direct endoscopic necrosectomy versus step-up approach for walled-off pancreatic necrosis: comparison of clinical outcome and health care utilization.

PubMed

Kumar, Nitin; Conwell, Darwin L; Thompson, Christopher C

2014-11-01

Infected walled-off pancreatic necrosis (WOPN) is a complication of acute pancreatitis requiring intervention. Surgery is associated with considerable morbidity. Percutaneous catheter drainage (PCD), initial therapy in the step-up approach, minimizes complications. Direct endoscopic necrosectomy (DEN) has demonstrated safety and efficacy. We compared outcome and health care utilization of DEN versus step-up approach. This was a matched cohort study using a prospective registry. Twelve consecutive DEN patients were matched with 12 step-up approach patients. Outcomes were clinical resolution after primary therapeutic modality, new organ failure, mortality, endocrine or exocrine insufficiency, length of stay, and health care utilization. Clinical resolution in 11 of 12 patients after DEN versus 3 of 12 step-up approach patients after PCD (P < 0.01). Nine step-up approach patients required surgery; 7 of these experienced complications. Direct endoscopic necrosectomy resulted in less new antibiotic use, pulmonary failure, endocrine insufficiency, and shorter length of stay (P < 0.05). Health care utilization was lower after DEN by 5.2:1 (P < 0.01). Direct endoscopic necrosectomy may be superior to step-up approach for WOPN with suspected or established infection. Primary PCD generally delayed definitive therapy. Given the higher efficacy, shorter length of stay, and lower health care utilization, DEN could be the first-line therapy for WOPN, with primary PCD for inaccessible or immature collections.

Better Informing Decision Making with Multiple Outcomes Cost-Effectiveness Analysis under Uncertainty in Cost-Disutility Space

PubMed Central

McCaffrey, Nikki; Agar, Meera; Harlum, Janeane; Karnon, Jonathon; Currow, David; Eckermann, Simon

2015-01-01

Introduction Comparing multiple, diverse outcomes with cost-effectiveness analysis (CEA) is important, yet challenging in areas like palliative care where domains are unamenable to integration with survival. Generic multi-attribute utility values exclude important domains and non-health outcomes, while partial analyses—where outcomes are considered separately, with their joint relationship under uncertainty ignored—lead to incorrect inference regarding preferred strategies. Objective The objective of this paper is to consider whether such decision making can be better informed with alternative presentation and summary measures, extending methods previously shown to have advantages in multiple strategy comparison. Methods Multiple outcomes CEA of a home-based palliative care model (PEACH) relative to usual care is undertaken in cost disutility (CDU) space and compared with analysis on the cost-effectiveness plane. Summary measures developed for comparing strategies across potential threshold values for multiple outcomes include: expected net loss (ENL) planes quantifying differences in expected net benefit; the ENL contour identifying preferred strategies minimising ENL and their expected value of perfect information; and cost-effectiveness acceptability planes showing probability of strategies minimising ENL. Results Conventional analysis suggests PEACH is cost-effective when the threshold value per additional day at home ( 1) exceeds $1,068 or dominated by usual care when only the proportion of home deaths is considered. In contrast, neither alternative dominate in CDU space where cost and outcomes are jointly considered, with the optimal strategy depending on threshold values. For example, PEACH minimises ENL when 1=$2,000 and 2=$2,000 (threshold value for dying at home), with a 51.6% chance of PEACH being cost-effective. Conclusion Comparison in CDU space and associated summary measures have distinct advantages to multiple domain comparisons, aiding transparent and robust joint comparison of costs and multiple effects under uncertainty across potential threshold values for effect, better informing net benefit assessment and related reimbursement and research decisions. PMID:25751629

A Literature Review and Compilation of Nuclear Waste Management System Attributes for Use in Multi-Objective System Evaluations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalinina, Elena Arkadievna; Samsa, Michael

The purpose of this work was to compile a comprehensive initial set of potential nuclear waste management system attributes. This initial set of attributes is intended to serve as a starting point for additional consideration by system analysts and planners to facilitate the development of a waste management system multi-objective evaluation framework based on the principles and methodology of multi-attribute utility analysis. The compilation is primarily based on a review of reports issued by the Canadian Nuclear Waste Management Organization (NWMO) and the Blue Ribbon Commission on America's Nuclear Future (BRC), but also an extensive review of the available literaturemore » for similar and past efforts as well. Numerous system attributes found in different sources were combined into a single objectives-oriented hierarchical structure. This study provides a discussion of the data sources and the descriptions of the hierarchical structure. A particular focus of this study was on collecting and compiling inputs from past studies that involved the participation of various external stakeholders. However, while the important role of stakeholder input in a country's waste management decision process is recognized in the referenced sources, there are only a limited number of in-depth studies of the stakeholders' differing perspectives. Compiling a comprehensive hierarchical listing of attributes is a complex task since stakeholders have multiple and often conflicting interests. The BRC worked for two years (January 2010 to January 2012) to "ensure it has heard from as many points of view as possible." The Canadian NWMO study took four years and ample resources, involving national and regional stakeholders' dialogs, internet-based dialogs, information and discussion sessions, open houses, workshops, round tables, public attitude research, website, and topic reports. The current compilation effort benefited from the distillation of these many varied inputs conducted by the previous studies.« less

Rooftop greenhouses in educational centers: A sustainability assessment of urban agriculture in compact cities.

PubMed

Nadal, Ana; Pons, Oriol; Cuerva, Eva; Rieradevall, Joan; Josa, Alejandro

2018-06-01

Today, urban agriculture is one of the most widely used sustainability strategies to improve the metabolism of a city. Schools can play an important role in the implementation of sustainability master plans, due their socio-educational activities and their cohesive links with families; all key elements in the development of urban agriculture. Thus, the main objective of this research is to develop a procedure, in compact cities, to assess the potential installation of rooftop greenhouses (RTGs) in schools. The generation of a dynamic assessment tool capable of identifying and prioritizing schools with a high potential for RTGs and their eventual implementation would also represent a significant factor in the environmental, social, and nutritional education of younger generations. The methodology has four-stages (Pre-selection criteria; Selection of necessities; Sustainability analysis; and Sensitivity analysis and selection of the best alternative) in which economic, environmental, social and governance aspects all are considered. It makes use of Multi-Attribute Utility Theory and Multi-Criteria Decision Making, through the Integrated Value Model for Sustainability Assessments and the participation of two panels of multidisciplinary specialists, for the preparation of a unified sustainability index that guarantees the objectivity of the selection process. This methodology has been applied and validated in a case study of 11 schools in Barcelona (Spain). The social perspective of the proposed methodology favored the school in the case-study with the most staff and the largest parent-teacher association (social and governance indicators) that obtained the highest sustainability index (S11); at a considerable distance (45%) from the worst case (S3) with fewer school staff and parental support. Finally, objective decisions may be taken with the assistance of this appropriate, adaptable, and reliable Multi-Criteria Decision-Making tool on the vertical integration and implementation of urban agriculture in schools, in support of the goals of sustainable development and the circular economy. Copyright © 2018 Elsevier B.V. All rights reserved.

Impact of Anterior vs Posterior Approach for Total Hip Arthroplasty on Post-Acute Care Service Utilization.

PubMed

L'Hommedieu, Coles E; Gera, James J; Rupp, Gerald; Salin, Jeffery W; Cox, John S; Duwelius, Paul J

2016-09-01

Controversy exists as to which surgical approach is best for total hip arthroplasty (THA). Previous studies suggested that the tissue-sparing anterior approach should result in a more rapid recovery requiring fewer postacute services, ultimately decreasing overall episodic cost. The purpose of this cross-sectional study was to determine if any significant differences exist between the anterior vs posterior approaches on postacute care service utilization, readmissions, or episodic cost. Claims data from 26,773 Medicare fee-for-service beneficiaries receiving elective THAs (Medical Severity-Diagnosis Related Groups (MS-DRGs) 469/470) were analyzed. Claims data were collected from the 2-year period, January 2013 through December 2014. The posterior surgical approach was performed on 23,653 patients while 3120 patients received the anterior approach. Data analysis showed negligible effect sizes in postacute care service utilization, readmission rate, and cost between the surgical approaches for elective THA (MS-DRG 469 and 470). Average THA total episode cost was negligibly higher for procedures using the anterior approach compared to the posterior approach ($22,517 and $22,068, respectively). Statistically significant differences were observed in inpatient rehab and home health cost and service utilization. However, the effect sizes of these comparisons are negligible when accounting for the large sample size. All other comparisons showed minimal and statistically insignificant variation. The results indicate that surgical approach alone is not the primary driver of postacute care service utilization, quality outcomes, or cost. Other factors such as physician-led patient-focused care pathways, care coordination, rapid rehabilitation protocols, perioperative pain management protocols, and patient education are integral for effective patient care. Copyright © 2016 Elsevier Inc. All rights reserved.

When homogeneity meets heterogeneity: the geographically weighted regression with spatial lag approach to prenatal care utilization

PubMed Central

Shoff, Carla; Chen, Vivian Yi-Ju; Yang, Tse-Chuan

2014-01-01

Using geographically weighted regression (GWR), a recent study by Shoff and colleagues (2012) investigated the place-specific risk factors for prenatal care utilization in the US and found that most of the relationships between late or not prenatal care and its determinants are spatially heterogeneous. However, the GWR approach may be subject to the confounding effect of spatial homogeneity. The goal of this study is to address this concern by including both spatial homogeneity and heterogeneity into the analysis. Specifically, we employ an analytic framework where a spatially lagged (SL) effect of the dependent variable is incorporated into the GWR model, which is called GWR-SL. Using this innovative framework, we found evidence to argue that spatial homogeneity is neglected in the study by Shoff et al. (2012) and the results are changed after considering the spatially lagged effect of prenatal care utilization. The GWR-SL approach allows us to gain a place-specific understanding of prenatal care utilization in US counties. In addition, we compared the GWR-SL results with the results of conventional approaches (i.e., OLS and spatial lag models) and found that GWR-SL is the preferred modeling approach. The new findings help us to better estimate how the predictors are associated with prenatal care utilization across space, and determine whether and how the level of prenatal care utilization in neighboring counties matters. PMID:24893033

GrDHP: a general utility function representation for dual heuristic dynamic programming.

PubMed

Ni, Zhen; He, Haibo; Zhao, Dongbin; Xu, Xin; Prokhorov, Danil V

2015-03-01

A general utility function representation is proposed to provide the required derivable and adjustable utility function for the dual heuristic dynamic programming (DHP) design. Goal representation DHP (GrDHP) is presented with a goal network being on top of the traditional DHP design. This goal network provides a general mapping between the system states and the derivatives of the utility function. With this proposed architecture, we can obtain the required derivatives of the utility function directly from the goal network. In addition, instead of a fixed predefined utility function in literature, we conduct an online learning process for the goal network so that the derivatives of the utility function can be adaptively tuned over time. We provide the control performance of both the proposed GrDHP and the traditional DHP approaches under the same environment and parameter settings. The statistical simulation results and the snapshot of the system variables are presented to demonstrate the improved learning and controlling performance. We also apply both approaches to a power system example to further demonstrate the control capabilities of the GrDHP approach.

Variables Influencing the Return on Investment in Management Training Programs: A Utility Analysis of 10 Swiss Cases

ERIC Educational Resources Information Center

Chochard, Yves; Davoine, Eric

2011-01-01

In this article, we present the utility analysis approach as an alternative and promising approach to measure the return on investment in managerial training programs. This approach, linking economic value with competencies developed by trainees, enables researchers and decision-makers to compare the return on investment from different programs in…

Monitoring and control requirement definition study for Dispersed Storage and Generation (DSG). Volume 4, appendix C: Identification from utility visits of present and future approaches to integration of DSG into distribution networks

NASA Technical Reports Server (NTRS)

1980-01-01

Visits to four utilities concerned with the use of DSG power sources on their distribution networks yielded useful impressions of present and future approaches to the integration of DSGs into electrical distribution network. Different approaches to future utility systems with DSG are beginning to take shape. The new DSG sources will be in decentralized locations with some measure of centralized control. The utilities have yet to establish firmly the communication and control means or their organization. For the present, the means for integrating the DSGs and their associated monitoring and control equipment into a unified system have not been decided.

Predictive Utility of Personality Disorder in Depression: Comparison of Outcomes and Taxonomic Approach.

PubMed

Newton-Howes, Giles; Mulder, Roger; Ellis, Pete M; Boden, Joseph M; Joyce, Peter

2017-09-19

There is debate around the best model for diagnosing personality disorder, both in terms of its relationship to the empirical data and clinical utility. Four randomized controlled trials examining various treatments for depression were analyzed at an individual patient level. Three different approaches to the diagnosis of personality disorder were analyzed in these patients. A total of 578 depressed patients were included in the analysis. Personality disorder, however measured, was of little predictive utility in the short term but added significantly to predictive modelling of medium-term outcomes, accounting for more than twice as much of the variance in social functioning outcome as depression psychopathology. Personality disorder assessment is of predictive utility with longer timeframes and when considering social outcomes as opposed to symptom counts. This utility is sufficiently great that there appears to be value in assessing personality; however, no particular approach outperforms any other.

The Effects of Rising Interest Rates on Electric Utility Stock Prices: Regulatory Considerations and Approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kihm, Steve; Satchwell, Andrew; Cappers, Peter

This technical brief identifies conditions under which utility regulators should consider implementing policy approaches that seek to mitigate negative outcomes due to an increase in interest rates. Interest rates are a key factor in determining a utility’s cost of equity and investors find value when returns exceed the cost of equity. Through historical observations of periods of rising and falling interest rates and application of a pro forma financial tool, we identify the key drivers of utility stock valuations and estimate the degree to which those valuations might be affected by increasing interest rates.3 We also analyze the efficacy ofmore » responses by utility regulators to mitigate potential negative financial impacts. We find that regulators have several possible approaches to mitigate a decline in value in an environment of increasing interest rates, though regulators must weigh the tradeoffs of improving investor value with potential increases in customer costs. Furthermore, the range of approaches reflects today’s many different electric utility regulatory models and regulatory responses to a decline in investor value will fit within state-specific models.« less

Conjoint analysis applications in health--a checklist: a report of the ISPOR Good Research Practices for Conjoint Analysis Task Force.

PubMed

Bridges, John F P; Hauber, A Brett; Marshall, Deborah; Lloyd, Andrew; Prosser, Lisa A; Regier, Dean A; Johnson, F Reed; Mauskopf, Josephine

2011-06-01

The application of conjoint analysis (including discrete-choice experiments and other multiattribute stated-preference methods) in health has increased rapidly over the past decade. A wider acceptance of these methods is limited by an absence of consensus-based methodological standards. The International Society for Pharmacoeconomics and Outcomes Research (ISPOR) Good Research Practices for Conjoint Analysis Task Force was established to identify good research practices for conjoint-analysis applications in health. The task force met regularly to identify the important steps in a conjoint analysis, to discuss good research practices for conjoint analysis, and to develop and refine the key criteria for identifying good research practices. ISPOR members contributed to this process through an extensive consultation process. A final consensus meeting was held to revise the article using these comments, and those of a number of international reviewers. Task force findings are presented as a 10-item checklist covering: 1) research question; 2) attributes and levels; 3) construction of tasks; 4) experimental design; 5) preference elicitation; 6) instrument design; 7) data-collection plan; 8) statistical analyses; 9) results and conclusions; and 10) study presentation. A primary question relating to each of the 10 items is posed, and three sub-questions examine finer issues within items. Although the checklist should not be interpreted as endorsing any specific methodological approach to conjoint analysis, it can facilitate future training activities and discussions of good research practices for the application of conjoint-analysis methods in health care studies. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Neural Signatures of Rational and Heuristic Choice Strategies: A Single Trial ERP Analysis.

PubMed

Wichary, Szymon; Magnuski, Mikołaj; Oleksy, Tomasz; Brzezicka, Aneta

2017-01-01

In multi-attribute choice, people use heuristics to simplify decision problems. We studied the use of heuristic and rational strategies and their electrophysiological correlates. Since previous work linked the P3 ERP component to attention and decision making, we were interested whether the amplitude of this component is associated with decision strategy use. To this end, we recorded EEG when participants performed a two-alternative choice task, where they could acquire decision cues in a sequential manner and use them to make choices. We classified participants' choices as consistent with a rational Weighted Additive rule (WADD) or a simple heuristic Take The Best (TTB). Participants differed in their preference for WADD and TTB. Using a permutation-based single trial approach, we analyzed EEG responses to consecutive decision cues and their relation to the individual strategy preference. The preference for WADD over TTB was associated with overall higher signal amplitudes to decision cues in the P3 time window. Moreover, the preference for WADD was associated with similar P3 amplitudes to consecutive cues, whereas the preference for TTB was associated with substantial decreases in P3 amplitudes to consecutive cues. We also found that the preference for TTB was associated with enhanced N1 component to cues that discriminated decision alternatives, suggesting very early attention allocation to such cues by TTB users. Our results suggest that preference for either WADD or TTB has an early neural signature reflecting differences in attentional weighting of decision cues. In light of recent findings and hypotheses regarding P3, we interpret these results as indicating the involvement of catecholamine arousal systems in shaping predecisional information processing and strategy selection.

Watermark: An Application and Methodology and Application for Interactive and intelligent Decision Support for Groundwater Systems

NASA Astrophysics Data System (ADS)

Pierce, S. A.; Wagner, K.; Schwartz, S.; Gentle, J. N., Jr.

2016-12-01

Critical water resources face the effects of historic drought, increased demand, and potential contamination, the need has never been greater to develop resources to effectively communicate conservation and protection across a broad audience and geographical area. The Watermark application and macro-analysis methodology merges topical analysis of context rich corpus from policy texts with multi-attributed solution sets from integrated models of water resource and other subsystems, such as mineral, food, energy, or environmental systems to construct a scalable, robust, and reproducible approach for identifying links between policy and science knowledge bases. The Watermark application is an open-source, interactive workspace to support science-based visualization and decision making. Designed with generalization in mind, Watermark is a flexible platform that allows for data analysis and inclusion of large datasets with an interactive front-end capable of connecting with other applications as well as advanced computing resources. In addition, the Watermark analysis methodology offers functionality that streamlines communication with non-technical users for policy, education, or engagement with groups around scientific topics of societal relevance. The technology stack for Watermark was selected with the goal of creating a robust and dynamic modular codebase that can be adjusted to fit many use cases and scale to support usage loads that range between simple data display to complex scientific simulation-based modelling and analytics. The methodology uses to topical analysis and simulation-optimization to systematically analyze the policy and management realities of resource systems and explicitly connect the social and problem contexts with science-based and engineering knowledge from models. A case example demonstrates use in a complex groundwater resources management study highlighting multi-criteria spatial decision making and uncertainty comparisons.

A matter of tradeoffs: reintroduction as a multiple objective decision

USGS Publications Warehouse

Converse, Sarah J.; Moore, Clinton T.; Folk, Martin J.; Runge, Michael C.

2013-01-01

Decision making in guidance of reintroduction efforts is made challenging by the substantial scientific uncertainty typically involved. However, a less recognized challenge is that the management objectives are often numerous and complex. Decision makers managing reintroduction efforts are often concerned with more than just how to maximize the probability of reintroduction success from a population perspective. Decision makers are also weighing other concerns such as budget limitations, public support and/or opposition, impacts on the ecosystem, and the need to consider not just a single reintroduction effort, but conservation of the entire species. Multiple objective decision analysis is a powerful tool for formal analysis of such complex decisions. We demonstrate the use of multiple objective decision analysis in the case of the Florida non-migratory whooping crane reintroduction effort. In this case, the State of Florida was considering whether to resume releases of captive-reared crane chicks into the non-migratory whooping crane population in that state. Management objectives under consideration included maximizing the probability of successful population establishment, minimizing costs, maximizing public relations benefits, maximizing the number of birds available for alternative reintroduction efforts, and maximizing learning about the demographic patterns of reintroduced whooping cranes. The State of Florida engaged in a collaborative process with their management partners, first, to evaluate and characterize important uncertainties about system behavior, and next, to formally evaluate the tradeoffs between objectives using the Simple Multi-Attribute Rating Technique (SMART). The recommendation resulting from this process, to continue releases of cranes at a moderate intensity, was adopted by the State of Florida in late 2008. Although continued releases did not receive support from the International Whooping Crane Recovery Team, this approach does provide a template for the formal, transparent consideration of multiple, potentially competing, objectives in reintroduction decision making.

Neural Signatures of Rational and Heuristic Choice Strategies: A Single Trial ERP Analysis

PubMed Central

Wichary, Szymon; Magnuski, Mikołaj; Oleksy, Tomasz; Brzezicka, Aneta

2017-01-01

In multi-attribute choice, people use heuristics to simplify decision problems. We studied the use of heuristic and rational strategies and their electrophysiological correlates. Since previous work linked the P3 ERP component to attention and decision making, we were interested whether the amplitude of this component is associated with decision strategy use. To this end, we recorded EEG when participants performed a two-alternative choice task, where they could acquire decision cues in a sequential manner and use them to make choices. We classified participants’ choices as consistent with a rational Weighted Additive rule (WADD) or a simple heuristic Take The Best (TTB). Participants differed in their preference for WADD and TTB. Using a permutation-based single trial approach, we analyzed EEG responses to consecutive decision cues and their relation to the individual strategy preference. The preference for WADD over TTB was associated with overall higher signal amplitudes to decision cues in the P3 time window. Moreover, the preference for WADD was associated with similar P3 amplitudes to consecutive cues, whereas the preference for TTB was associated with substantial decreases in P3 amplitudes to consecutive cues. We also found that the preference for TTB was associated with enhanced N1 component to cues that discriminated decision alternatives, suggesting very early attention allocation to such cues by TTB users. Our results suggest that preference for either WADD or TTB has an early neural signature reflecting differences in attentional weighting of decision cues. In light of recent findings and hypotheses regarding P3, we interpret these results as indicating the involvement of catecholamine arousal systems in shaping predecisional information processing and strategy selection. PMID:28867996

Personalized treatment planning with a model of radiation therapy outcomes for use in multiobjective optimization of IMRT plans for prostate cancer.

PubMed

Smith, Wade P; Kim, Minsun; Holdsworth, Clay; Liao, Jay; Phillips, Mark H

2016-03-11

To build a new treatment planning approach that extends beyond radiation transport and IMRT optimization by modeling the radiation therapy process and prognostic indicators for more outcome-focused decision making. An in-house treatment planning system was modified to include multiobjective inverse planning, a probabilistic outcome model, and a multi-attribute decision aid. A genetic algorithm generated a set of plans embodying trade-offs between the separate objectives. An influence diagram network modeled the radiation therapy process of prostate cancer using expert opinion, results of clinical trials, and published research. A Markov model calculated a quality adjusted life expectancy (QALE), which was the endpoint for ranking plans. The Multiobjective Evolutionary Algorithm (MOEA) was designed to produce an approximation of the Pareto Front representing optimal tradeoffs for IMRT plans. Prognostic information from the dosimetrics of the plans, and from patient-specific clinical variables were combined by the influence diagram. QALEs were calculated for each plan for each set of patient characteristics. Sensitivity analyses were conducted to explore changes in outcomes for variations in patient characteristics and dosimetric variables. The model calculated life expectancies that were in agreement with an independent clinical study. The radiation therapy model proposed has integrated a number of different physical, biological and clinical models into a more comprehensive model. It illustrates a number of the critical aspects of treatment planning that can be improved and represents a more detailed description of the therapy process. A Markov model was implemented to provide a stronger connection between dosimetric variables and clinical outcomes and could provide a practical, quantitative method for making difficult clinical decisions.

Evaluation of a Class of Simple and Effective Uncertainty Methods for Sparse Samples of Random Variables and Functions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romero, Vicente; Bonney, Matthew; Schroeder, Benjamin

When very few samples of a random quantity are available from a source distribution of unknown shape, it is usually not possible to accurately infer the exact distribution from which the data samples come. Under-estimation of important quantities such as response variance and failure probabilities can result. For many engineering purposes, including design and risk analysis, we attempt to avoid under-estimation with a strategy to conservatively estimate (bound) these types of quantities -- without being overly conservative -- when only a few samples of a random quantity are available from model predictions or replicate experiments. This report examines a classmore » of related sparse-data uncertainty representation and inference approaches that are relatively simple, inexpensive, and effective. Tradeoffs between the methods' conservatism, reliability, and risk versus number of data samples (cost) are quantified with multi-attribute metrics use d to assess method performance for conservative estimation of two representative quantities: central 95% of response; and 10 -4 probability of exceeding a response threshold in a tail of the distribution. Each method's performance is characterized with 10,000 random trials on a large number of diverse and challenging distributions. The best method and number of samples to use in a given circumstance depends on the uncertainty quantity to be estimated, the PDF character, and the desired reliability of bounding the true value. On the basis of this large data base and study, a strategy is proposed for selecting the method and number of samples for attaining reasonable credibility levels in bounding these types of quantities when sparse samples of random variables or functions are available from experiments or simulations.« less

An assessment of national risk: General concepts and overall approach. [carbon fiber utilization in commercial aviation

NASA Technical Reports Server (NTRS)

Kalelkar, A. S.

1979-01-01

The analysis of risk presented by carbon fiber utilization in commercial aviation is reported. The discussion is presented in three parts: (1) general concepts; (2) overall approach; and (3) risk evaluation and perspective.

Strategic parameter-driven routing models for multidestination traffic in telecommunication networks.

PubMed

Lee, Y; Tien, J M

2001-01-01

We present mathematical models that determine the optimal parameters for strategically routing multidestination traffic in an end-to-end network setting. Multidestination traffic refers to a traffic type that can be routed to any one of a multiple number of destinations. A growing number of communication services is based on multidestination routing. In this parameter-driven approach, a multidestination call is routed to one of the candidate destination nodes in accordance with predetermined decision parameters associated with each candidate node. We present three different approaches: (1) a link utilization (LU) approach, (2) a network cost (NC) approach, and (3) a combined parametric (CP) approach. The LU approach provides the solution that would result in an optimally balanced link utilization, whereas the NC approach provides the least expensive way to route traffic to destinations. The CP approach, on the other hand, provides multiple solutions that help leverage link utilization and cost. The LU approach has in fact been implemented by a long distance carrier resulting in a considerable efficiency improvement in its international direct services, as summarized.

Building the Evidence Base for Decision-making in Cancer Genomic Medicine Using Comparative Effectiveness Research

PubMed Central

Goddard, Katrina A.B.; Knaus, William A.; Whitlock, Evelyn; Lyman, Gary H.; Feigelson, Heather Spencer; Schully, Sheri D.; Ramsey, Scott; Tunis, Sean; Freedman, Andrew N.; Khoury, Muin J.; Veenstra, David L.

2013-01-01

Background The clinical utility is uncertain for many cancer genomic applications. Comparative effectiveness research (CER) can provide evidence to clarify this uncertainty. Objectives To identify approaches to help stakeholders make evidence-based decisions, and to describe potential challenges and opportunities using CER to produce evidence-based guidance. Methods We identified general CER approaches for genomic applications through literature review, the authors’ experiences, and lessons learned from a recent, seven-site CER initiative in cancer genomic medicine. Case studies illustrate the use of CER approaches. Results Evidence generation and synthesis approaches include comparative observational and randomized trials, patient reported outcomes, decision modeling, and economic analysis. We identified significant challenges to conducting CER in cancer genomics: the rapid pace of innovation, the lack of regulation, the limited evidence for clinical utility, and the beliefs that genomic tests could have personal utility without having clinical utility. Opportunities to capitalize on CER methods in cancer genomics include improvements in the conduct of evidence synthesis, stakeholder engagement, increasing the number of comparative studies, and developing approaches to inform clinical guidelines and research prioritization. Conclusions CER offers a variety of methodological approaches to address stakeholders’ needs. Innovative approaches are needed to ensure an effective translation of genomic discoveries. PMID:22516979

The Effects of Ecoregion Dynamics on Agroregions for Permanent Crops in the Continental US Under Future Climate Change Scenarios

NASA Astrophysics Data System (ADS)

Maddalena, D. M.; L'Heureux, J.; Hoffman, F. M.

2017-12-01

Fruit and Tree Nut production in the US averaged 14% of total annual production, or roughly $28 billion in total revenue for the most recent 5 year period (2011 - 2015). The success of these crops is highly dependent on environmental conditions. Cold snaps before winter dormancy, early frosts in spring, and lack of sufficient chilling hours can reduce productivity, inflict wood damage, and lead to economic loss. Climate change can increase the likelihood of these threats and may have long-term implications for the areas where these crops are grown due to the migration of ecoregions as climate patters shift. We delineate ecoregions using multi-attribute spatio-temporal clustering and calculate chilling unit accumulation under past, present, and future climate scenarios using measured and modeled data. These results are then compared to current agroregions in the US to calculate risk dynamics, potential economic loss, and to map future agroregion scenarios. Our results offer considerations for food system sustainability under a shifting climate.

Visualizing multiattribute Web transactions using a freeze technique

NASA Astrophysics Data System (ADS)

Hao, Ming C.; Cotting, Daniel; Dayal, Umeshwar; Machiraju, Vijay; Garg, Pankaj

2003-05-01

Web transactions are multidimensional and have a number of attributes: client, URL, response times, and numbers of messages. One of the key questions is how to simultaneously lay out in a graph the multiple relationships, such as the relationships between the web client response times and URLs in a web access application. In this paper, we describe a freeze technique to enhance a physics-based visualization system for web transactions. The idea is to freeze one set of objects before laying out the next set of objects during the construction of the graph. As a result, we substantially reduce the force computation time. This technique consists of three steps: automated classification, a freeze operation, and a graph layout. These three steps are iterated until the final graph is generated. This iterated-freeze technique has been prototyped in several e-service applications at Hewlett Packard Laboratories. It has been used to visually analyze large volumes of service and sales transactions at online web sites.

State fusion entropy for continuous and site-specific analysis of landslide stability changing regularities

NASA Astrophysics Data System (ADS)

Liu, Yong; Qin, Zhimeng; Hu, Baodan; Feng, Shuai

2018-04-01

Stability analysis is of great significance to landslide hazard prevention, especially the dynamic stability. However, many existing stability analysis methods are difficult to analyse the continuous landslide stability and its changing regularities in a uniform criterion due to the unique landslide geological conditions. Based on the relationship between displacement monitoring data, deformation states and landslide stability, a state fusion entropy method is herein proposed to derive landslide instability through a comprehensive multi-attribute entropy analysis of deformation states, which are defined by a proposed joint clustering method combining K-means and a cloud model. Taking Xintan landslide as the detailed case study, cumulative state fusion entropy presents an obvious increasing trend after the landslide entered accelerative deformation stage and historical maxima match highly with landslide macroscopic deformation behaviours in key time nodes. Reasonable results are also obtained in its application to several other landslides in the Three Gorges Reservoir in China. Combined with field survey, state fusion entropy may serve for assessing landslide stability and judging landslide evolutionary stages.

Underground Mining Method Selection Using WPM and PROMETHEE

NASA Astrophysics Data System (ADS)

Balusa, Bhanu Chander; Singam, Jayanthu

2018-04-01

The aim of this paper is to represent the solution to the problem of selecting suitable underground mining method for the mining industry. It is achieved by using two multi-attribute decision making techniques. These two techniques are weighted product method (WPM) and preference ranking organization method for enrichment evaluation (PROMETHEE). In this paper, analytic hierarchy process is used for weight's calculation of the attributes (i.e. parameters which are used in this paper). Mining method selection depends on physical parameters, mechanical parameters, economical parameters and technical parameters. WPM and PROMETHEE techniques have the ability to consider the relationship between the parameters and mining methods. The proposed techniques give higher accuracy and faster computation capability when compared with other decision making techniques. The proposed techniques are presented to determine the effective mining method for bauxite mine. The results of these techniques are compared with methods used in the earlier research works. The results show, conventional cut and fill method is the most suitable mining method.

Temporary site selection and decision-making methods: a case study of Tehran, Iran.

PubMed

Omidvar, Babak; Baradaran-Shoraka, Mohammad; Nojavan, Mehdi

2013-07-01

Decisions on selecting an appropriate site for temporary shelter used to be taken in a limited amount of time after a disaster. The need for a systematic method in this area inspired the MADM (multi-attribute decision making) for complex disaster management decisions. This research proposes a model for appropriate and systematic site selection for temporary shelters, before an earthquake, using a geographical information system and MADM based on an earthquake damage assessment. After the effective criteria for site selection of temporary shelters are determined, the geographical layers of these criteria are prepared for Municipal District No.1 of Greater Tehran, the capital of Iran. Given these attributes and the required shelter area (415-610 hectares), 14 zones are proposed initially. Various MADM methods are used for the final selection. The mean of the aggregated ranking results are determined, and 10 of the 14 initial zones are ranked. © 2013 The Author(s). Journal compilation © Overseas Development Institute, 2013.

Optimisation study of a vehicle bumper subsystem with fuzzy parameters

NASA Astrophysics Data System (ADS)

Farkas, L.; Moens, D.; Donders, S.; Vandepitte, D.

2012-10-01

This paper deals with the design and optimisation for crashworthiness of a vehicle bumper subsystem, which is a key scenario for vehicle component design. The automotive manufacturers and suppliers have to find optimal design solutions for such subsystems that comply with the conflicting requirements of the regulatory bodies regarding functional performance (safety and repairability) and regarding the environmental impact (mass). For the bumper design challenge, an integrated methodology for multi-attribute design engineering of mechanical structures is set up. The integrated process captures the various tasks that are usually performed manually, this way facilitating the automated design iterations for optimisation. Subsequently, an optimisation process is applied that takes the effect of parametric uncertainties into account, such that the system level of failure possibility is acceptable. This optimisation process is referred to as possibility-based design optimisation and integrates the fuzzy FE analysis applied for the uncertainty treatment in crash simulations. This process is the counterpart of the reliability-based design optimisation used in a probabilistic context with statistically defined parameters (variabilities).

Hydrofutures and Hydromorphology

NASA Astrophysics Data System (ADS)

Lall, U.

2006-12-01

Hydromorphology refers to the science of hydrologic evolution. It represents a synthesis of planetary and social sciences that collectively determine the spatial and temporal evolution of planetary water. At present human actions directly or indirectly play a major role in determining hydrofutures. Man's role in changing water trajectories is now clear at both local and planetary scales. Changing climate leads to changing ecology and changing water patterns. Changing water conditions may in turn regulate (limit anthropogenic climate change) or adversely impact (e.g., runaway greenhouse) climate, as well as human habitation and water use patterns. This talk will address the problem of the prediction of future hydrologic conditions in the different media and reservoirs of the planet, from the integrated perspective indicated above. Key examples of the mechanisms of hydrologic change, that relate to climate and ecological dyanmics, and to human activity are identified as well. A theoretical framework for researching this multi-attribute dynamical system from a water centric perspective is advocated as a critical need for planetary science and human welfare.

The effects of nutrition labeling on consumer food choice: a psychological experiment and computational model.

PubMed

Helfer, Peter; Shultz, Thomas R

2014-12-01

The widespread availability of calorie-dense food is believed to be a contributing cause of an epidemic of obesity and associated diseases throughout the world. One possible countermeasure is to empower consumers to make healthier food choices with useful nutrition labeling. An important part of this endeavor is to determine the usability of existing and proposed labeling schemes. Here, we report an experiment on how four different labeling schemes affect the speed and nutritional value of food choices. We then apply decision field theory, a leading computational model of human decision making, to simulate the experimental results. The psychology experiment shows that quantitative, single-attribute labeling schemes have greater usability than multiattribute and binary ones, and that they remain effective under moderate time pressure. The computational model simulates these psychological results and provides explanatory insights into them. This work shows how experimental psychology and computational modeling can contribute to the evaluation and improvement of nutrition-labeling schemes. © 2014 New York Academy of Sciences.

A consensus reaching model for 2-tuple linguistic multiple attribute group decision making with incomplete weight information

NASA Astrophysics Data System (ADS)

Zhang, Wancheng; Xu, Yejun; Wang, Huimin

2016-01-01

The aim of this paper is to put forward a consensus reaching method for multi-attribute group decision-making (MAGDM) problems with linguistic information, in which the weight information of experts and attributes is unknown. First, some basic concepts and operational laws of 2-tuple linguistic label are introduced. Then, a grey relational analysis method and a maximising deviation method are proposed to calculate the incomplete weight information of experts and attributes respectively. To eliminate the conflict in the group, a weight-updating model is employed to derive the weights of experts based on their contribution to the consensus reaching process. After conflict elimination, the final group preference can be obtained which will give the ranking of the alternatives. The model can effectively avoid information distortion which is occurred regularly in the linguistic information processing. Finally, an illustrative example is given to illustrate the application of the proposed method and comparative analysis with the existing methods are offered to show the advantages of the proposed method.

Time-varying nonstationary multivariate risk analysis using a dynamic Bayesian copula

NASA Astrophysics Data System (ADS)

Sarhadi, Ali; Burn, Donald H.; Concepción Ausín, María.; Wiper, Michael P.

2016-03-01

A time-varying risk analysis is proposed for an adaptive design framework in nonstationary conditions arising from climate change. A Bayesian, dynamic conditional copula is developed for modeling the time-varying dependence structure between mixed continuous and discrete multiattributes of multidimensional hydrometeorological phenomena. Joint Bayesian inference is carried out to fit the marginals and copula in an illustrative example using an adaptive, Gibbs Markov Chain Monte Carlo (MCMC) sampler. Posterior mean estimates and credible intervals are provided for the model parameters and the Deviance Information Criterion (DIC) is used to select the model that best captures different forms of nonstationarity over time. This study also introduces a fully Bayesian, time-varying joint return period for multivariate time-dependent risk analysis in nonstationary environments. The results demonstrate that the nature and the risk of extreme-climate multidimensional processes are changed over time under the impact of climate change, and accordingly the long-term decision making strategies should be updated based on the anomalies of the nonstationary environment.

Feature Integration in the Mapping of Multi-Attribute Visual Stimuli to Responses

PubMed Central

Ishizaki, Takuya; Morita, Hiromi; Morita, Masahiko

2015-01-01

In the human visual system, different attributes of an object, such as shape and color, are separately processed in different modules and then integrated to elicit a specific response. In this process, different attributes are thought to be temporarily “bound” together by focusing attention on the object; however, how such binding contributes to stimulus-response mapping remains unclear. Here we report that learning and performance of stimulus-response tasks was more difficult when three attributes of the stimulus determined the correct response than when two attributes did. We also found that spatially separated presentations of attributes considerably complicated the task, although they did not markedly affect target detection. These results are consistent with a paired-attribute model in which bound feature pairs, rather than object representations, are associated with responses by learning. This suggests that attention does not bind three or more attributes into a unitary object representation, and long-term learning is required for their integration. PMID:25762010

Structure Based Drug Design of Crizotinib (PF-02341066), a Potent and Selective Dual Inhibitor of Mesenchymal-Epithelial Transition Factor (c-MET) Kinase and Anaplastic Lymphoma Kinase (ALK)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cui, J Jean; Tran-Dube,; #769

2011-08-03

Because of the critical roles of aberrant signaling in cancer, both c-MET and ALK receptor tyrosine kinases are attractive oncology targets for therapeutic intervention. The cocrystal structure of 3 (PHA-665752), bound to c-MET kinase domain, revealed a novel ATP site environment, which served as the target to guide parallel, multiattribute drug design. A novel 2-amino-5-aryl-3-benzyloxypyridine series was created to more effectively make the key interactions achieved with 3. In the novel series, the 2-aminopyridine core allowed a 3-benzyloxy group to reach into the same pocket as the 2,6-dichlorophenyl group of 3 via a more direct vector and thus with amore » better ligand efficiency (LE). Further optimization of the lead series generated the clinical candidate crizotinib (PF-02341066), which demonstrated potent in vitro and in vivo c-MET kinase and ALK inhibition, effective tumor growth inhibition, and good pharmaceutical properties.« less

Rough Evaluation Structure: Application of Rough Set Theory to Generate Simple Rules for Inconsistent Preference Relation

NASA Astrophysics Data System (ADS)

Gehrmann, Andreas; Nagai, Yoshimitsu; Yoshida, Osamu; Ishizu, Syohei

Since management decision-making becomes complex and preferences of the decision-maker frequently becomes inconsistent, multi-attribute decision-making problems were studied. To represent inconsistent preference relation, the concept of evaluation structure was introduced. We can generate simple rules to represent inconsistent preference relation by the evaluation structures. Further rough set theory for the preference relation was studied and the concept of approximation was introduced. One of our main aims of this paper is to introduce a concept of rough evaluation structure for representing inconsistent preference relation. We apply rough set theory to the evaluation structure, and develop a method for generating simple rules for inconsistent preference relations. In this paper, we introduce concepts of totally ordered information system, similarity class of preference relation, upper and lower approximation of preference relations. We also show the properties of rough evaluation structure and provide a simple example. As an application of rough evaluation structure, we analyze questionnaire survey of customer preferences about audio players.

Visual Attention Allocation Between Robotic Arm and Environmental Process Control: Validating the STOM Task Switching Model

NASA Technical Reports Server (NTRS)

Wickens, Christopher; Vieanne, Alex; Clegg, Benjamin; Sebok, Angelia; Janes, Jessica

2015-01-01

Fifty six participants time shared a spacecraft environmental control system task with a realistic space robotic arm control task in either a manual or highly automated version. The former could suffer minor failures, whose diagnosis and repair were supported by a decision aid. At the end of the experiment this decision aid unexpectedly failed. We measured visual attention allocation and switching between the two tasks, in each of the eight conditions formed by manual-automated arm X expected-unexpected failure X monitoring- failure management. We also used our multi-attribute task switching model, based on task attributes of priority interest, difficulty and salience that were self-rated by participants, to predict allocation. An un-weighted model based on attributes of difficulty, interest and salience accounted for 96 percent of the task allocation variance across the 8 different conditions. Task difficulty served as an attractor, with more difficult tasks increasing the tendency to stay on task.

Neural network analysis of crosshole tomographic images: The seismic signature of gas hydrate bearing sediments in the Mackenzie Delta (NW Canada)

NASA Astrophysics Data System (ADS)

Bauer, K.; Pratt, R. G.; Haberland, C.; Weber, M.

2008-10-01

Crosshole seismic experiments were conducted to study the in-situ properties of gas hydrate bearing sediments (GHBS) in the Mackenzie Delta (NW Canada). Seismic tomography provided images of P velocity, anisotropy, and attenuation. Self-organizing maps (SOM) are powerful neural network techniques to classify and interpret multi-attribute data sets. The coincident tomographic images are translated to a set of data vectors in order to train a Kohonen layer. The total gradient of the model vectors is determined for the trained SOM and a watershed segmentation algorithm is used to visualize and map the lithological clusters with well-defined seismic signatures. Application to the Mallik data reveals four major litho-types: (1) GHBS, (2) sands, (3) shale/coal interlayering, and (4) silt. The signature of seismic P wave characteristics distinguished for the GHBS (high velocities, strong anisotropy and attenuation) is new and can be used for new exploration strategies to map and quantify gas hydrates.

Some Muirhead Mean Operators for Intuitionistic Fuzzy Numbers and Their Applications to Group Decision Making.

PubMed

Liu, Peide; Li, Dengfeng

2017-01-01

Muirhead mean (MM) is a well-known aggregation operator which can consider interrelationships among any number of arguments assigned by a variable vector. Besides, it is a universal operator since it can contain other general operators by assigning some special parameter values. However, the MM can only process the crisp numbers. Inspired by the MM' advantages, the aim of this paper is to extend MM to process the intuitionistic fuzzy numbers (IFNs) and then to solve the multi-attribute group decision making (MAGDM) problems. Firstly, we develop some intuitionistic fuzzy Muirhead mean (IFMM) operators by extending MM to intuitionistic fuzzy information. Then, we prove some properties and discuss some special cases with respect to the parameter vector. Moreover, we present two new methods to deal with MAGDM problems with the intuitionistic fuzzy information based on the proposed MM operators. Finally, we verify the validity and reliability of our methods by using an application example, and analyze the advantages of our methods by comparing with other existing methods.

Analysis respons to the implementation of nuclear installations safety culture using AHP-TOPSIS

NASA Astrophysics Data System (ADS)

Situmorang, J.; Kuntoro, I.; Santoso, S.; Subekti, M.; Sunaryo, G. R.

2018-02-01

An analysis of responses to the implementation of nuclear installations safety culture has been done using AHP (Analitic Hierarchy Process) - TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution). Safety culture is considered as collective commitments of the decision-making level, management level, and individual level. Thus each level will provide a subjective perspective as an alternative approach to implementation. Furthermore safety culture is considered by the statement of five characteristics which in more detail form consist of 37 attributes, and therefore can be expressed as multi-attribute state. Those characteristics and or attributes will be a criterion and its value is difficult to determine. Those criteria of course, will determine and strongly influence the implementation of the corresponding safety culture. To determine the pattern and magnitude of the influence is done by using a TOPSIS that is based on decision matrix approach and is composed of alternatives and criteria. The weight of each criterion is determined by AHP technique. The data used are data collected through questionnaires at the workshop on safety and health in 2015. .Reliability test of data gives Cronbah Alpha value of 95.5% which according to the criteria is stated reliable. Validity test using bivariate correlation analysis technique between each attribute give Pearson correlation for all attribute is significant at level 0,01. Using confirmatory factor analysis gives Kaise-Meyer-Olkin of sampling Adequacy (KMO) is 0.719 and it is greater than the acceptance criterion 0.5 as well as the 0.000 significance level much smaller than 0.05 and stated that further analysis could be performed. As a result of the analysis it is found that responses from the level of decision maker (second echelon) dominate the best order preference rank to be the best solution in strengthening the nuclear installation safety culture, except for the first characteristics, safety is a clearly recognized value. The rank of preference order is obtained sequentially according to the level of policy maker, management and individual or staff.

Dedicated operating room for emergency surgery generates more utilization, less overtime, and less cancellations.

PubMed

van Veen-Berkx, Elizabeth; Elkhuizen, Sylvia G; Kuijper, Bart; Kazemier, Geert

2016-01-01

Two approaches prevail for reserving operating room (OR) capacity for emergency surgery: (1) dedicated emergency ORs and (2) evenly allocating capacity to all elective ORs, thereby creating a virtual emergency team. Previous studies contradict which approach leads to the best performance in OR utilization. Quasi-experimental controlled time-series design with empirical data from 3 university medical centers. Four different time periods were compared with analysis of variance with contrasts. Performance was measured based on 467,522 surgical cases. After closing the dedicated emergency OR, utilization slightly increased; overtime also increased. This was in contrast to earlier simulated results. The 2 control centers, maintaining a dedicated emergency OR, showed a higher increase in utilization and a decrease in overtime, along with a smaller ratio of case cancellations because of emergency surgery. This study shows that in daily practice a dedicated emergency OR is the preferred approach in performance terms regarding utilization, overtime, and case cancellations. Copyright © 2016 Elsevier Inc. All rights reserved.

Environmental Study Plan for the Trinity River Basin, Texas

DTIC Science & Technology

1972-01-01

with the requirements of NEPA, as specified In Sec. 102. These requirements Include the utilization of "a systematic, interdisciplinary approach which...and making updated completion projections is therefore included (Appendix F). B. Basic approach of the proposed study. The proposed study is divided...different from the customary approach utilized by many research specialists. Some of these differences are discussed below. I. The study is not intended

Profiles of the Most Preferred and the Most Effective Music Therapy Approaches Being Utilized with Children with Autism Spectrum Disorders According to the Opinions of Music Therapists in the U.S.

ERIC Educational Resources Information Center

Eren, Bilgehan

2017-01-01

The purpose of this study was to identify and analyze opinions of music therapists practicing in the United States, regarding various music therapy approaches currently being utilized with children diagnosed with Autism Spectrum Disorder. Music therapy approaches were analyzed for possible correlations between music therapists' preferences, and…

The Practice of Evaluation Research and the Use of Evaluation Results.

ERIC Educational Resources Information Center

Van den Berg, G.; Hoeben, W. Th. J. G.

1984-01-01

Lack of use of educational evaluation results in the Netherlands was investigated by analyzing 14 curriculum evaluation studies. Results indicated that rational decision making with a technical (empirical) evaluation approach makes utilization of results most likely. Incremental decision making and a conformative approach make utilization least…

Multisensor satellite data for water quality analysis and water pollution risk assessment: decision making under deep uncertainty with fuzzy algorithm in framework of multimodel approach

NASA Astrophysics Data System (ADS)

Kostyuchenko, Yuriy V.; Sztoyka, Yulia; Kopachevsky, Ivan; Artemenko, Igor; Yuschenko, Maxim

2017-10-01

Multi-model approach for remote sensing data processing and interpretation is described. The problem of satellite data utilization in multi-modeling approach for socio-ecological risks assessment is formally defined. Observation, measurement and modeling data utilization method in the framework of multi-model approach is described. Methodology and models of risk assessment in framework of decision support approach are defined and described. Method of water quality assessment using satellite observation data is described. Method is based on analysis of spectral reflectance of aquifers. Spectral signatures of freshwater bodies and offshores are analyzed. Correlations between spectral reflectance, pollutions and selected water quality parameters are analyzed and quantified. Data of MODIS, MISR, AIRS and Landsat sensors received in 2002-2014 have been utilized verified by in-field spectrometry and lab measurements. Fuzzy logic based approach for decision support in field of water quality degradation risk is discussed. Decision on water quality category is making based on fuzzy algorithm using limited set of uncertain parameters. Data from satellite observations, field measurements and modeling is utilizing in the framework of the approach proposed. It is shown that this algorithm allows estimate water quality degradation rate and pollution risks. Problems of construction of spatial and temporal distribution of calculated parameters, as well as a problem of data regularization are discussed. Using proposed approach, maps of surface water pollution risk from point and diffuse sources are calculated and discussed.

Tamoxifen for breast cancer risk reduction: impact of alternative approaches to quality-of-life adjustment on cost-effectiveness analysis.

PubMed

Melnikow, Joy; Birch, Stephen; Slee, Christina; McCarthy, Theodore J; Helms, L Jay; Kuppermann, Miriam

2008-09-01

In cost-effectiveness analysis (CEA), the effects of health-care interventions on multiple health dimensions typically require consideration of both quantity and quality of life. To explore the impact of alternative approaches to quality-of-life adjustment using patient preferences (utilities) on the outcome of a CEA on use of tamoxifen for breast cancer risk reduction. A state transition Markov model tracked hypothetical cohorts of women who did or did not take 5 years of tamoxifen for breast cancer risk reduction. Incremental quality-adjusted effectiveness and cost-effectiveness ratios (ICERs) for models including and excluding a utility adjustment for menopausal symptoms were compared with each other and to a global utility model. Two hundred fifty-five women aged 50 and over with estimated 5-year breast cancer risk >or=1.67% participated in utility assessment interviews. Standard gamble utilities were assessed for specified tamoxifen-related health outcomes, current health, and for a global assessment of possible outcomes of tamoxifen use. Inclusion of a utility for menopausal symptoms in the outcome-specific models substantially increased the ICER; at the threshold 5-year breast cancer risk of 1.67%, tamoxifen was dominated. When a global utility for tamoxifen was used in place of outcome-specific utilities, tamoxifen was dominated under all circumstances. CEAs may be profoundly affected by the types of outcomes considered for quality-of-life adjustment and how these outcomes are grouped for utility assessment. Comparisons of ICERs across analyses must consider effects of different approaches to using utilities for quality-of-life adjustment.

Introduction to Concurrent Engineering: Electronic Circuit Design and Production Applications

DTIC Science & Technology

1992-09-01

STD-1629. Failure mode distribution data for many different types of parts may be found in RAC publication FMD -91. FMEA utilizes inductive logic in a...contrasts with a Fault Tree Analysis ( FTA ) which utilizes deductive logic in a "top down" approach. In FTA , a system failure is assumed and traced down...Analysis ( FTA ) is a graphical method of risk analysis used to identify critical failure modes within a system or equipment. Utilizing a pictorial approach

Mission Analysis for Multiple Rendezvous of Near-Earth Asteroids Using Earth Gravity Assist

DTIC Science & Technology

2010-03-01

devices. Finding solutions with this approach leads to a quicker timeline for possible missions since one does not have to wait for the propulsion...in this research. The discussion focuses on their approach to the problem and the applicability to this research. The headings are the titles of... approach the problem utilizing conventional impulsive thrust propulsion systems and utilize data presented from the JPL website for locating the

Utilization of the Safe Surgical Dislocation Approach of the Hip to Retrieve a Bullet from the Femoral Head

PubMed Central

Delaney, Ruth; Albright, Maurice; Rebello, Gleeson

2011-01-01

Retained intra-articular missiles from low-velocity handguns can lead to mechanical arthritis, synovitis, and lead toxicity. Various surgical approaches have been described to extract such foreign bodies from the hip joint. We present the case of a 17-year-old male in which the surgical dislocation approach was utilized to retrieve a bullet from the femoral head with a good short-term outcome. This case represents a rare application of the surgical hip dislocation approach for an unusual trauma. PMID:23198205

Balloon-Occluded Retrograde Transvenous Obliteration of a Gastric Vascular Malformation: An Innovative Approach to Treatment of a Rare Condition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansing, Catherine E., E-mail: catherine.e.hansing.mil@mail.mil; Marquardt, Joseph P.; Sutton, Daniel M.

Arteriovenous malformations (AVMs) are a high-flow form of a vascular malformation, which can be found anywhere in the body. While historically treated surgically, a multidisciplinary approach utilizing multiple specialties and treatment modalities is now commonly employed. In order to effectively treat an AVM, the nidus must be targeted and eradicated, which can be done via multiple approaches. We present the case of a 43-year-old male with a gastric wall AVM, which was initially incompletely treated using a percutaneous transarterial approach. The gastric AVM was noted to have dominant drainage through a gastrorenal shunt; therefore, Balloon-occluded Retrograde Transvenous Obliteration (BRTO) wasmore » utilized to eradicate the AVM nidus. This case illustrates the utility of Interventional Radiology, specifically BRTO, as another treatment option for challenging AVMs.« less

Neurobiological studies of risk assessment: a comparison of expected utility and mean-variance approaches.

PubMed

D'Acremont, Mathieu; Bossaerts, Peter

2008-12-01

When modeling valuation under uncertainty, economists generally prefer expected utility because it has an axiomatic foundation, meaning that the resulting choices will satisfy a number of rationality requirements. In expected utility theory, values are computed by multiplying probabilities of each possible state of nature by the payoff in that state and summing the results. The drawback of this approach is that all state probabilities need to be dealt with separately, which becomes extremely cumbersome when it comes to learning. Finance academics and professionals, however, prefer to value risky prospects in terms of a trade-off between expected reward and risk, where the latter is usually measured in terms of reward variance. This mean-variance approach is fast and simple and greatly facilitates learning, but it impedes assigning values to new gambles on the basis of those of known ones. To date, it is unclear whether the human brain computes values in accordance with expected utility theory or with mean-variance analysis. In this article, we discuss the theoretical and empirical arguments that favor one or the other theory. We also propose a new experimental paradigm that could determine whether the human brain follows the expected utility or the mean-variance approach. Behavioral results of implementation of the paradigm are discussed.

Models of Evaluation Utilization: A Meta-Modeling Synthesis of the Literature.

ERIC Educational Resources Information Center

Johnson, R. Burke

An integrative causal process model of evaluation utilization variables is presented. The model was developed through a traditional approach to literature review that lists results from published studies and relates these to the research topic, and through an approach that tries to integrate the models found in the literature search. Meta-modeling…

Sociotechnical Systems Approach: An Internal Assessment of a Blended Doctoral Program

ERIC Educational Resources Information Center

Erichsen, Elizabeth Anne; DeLorme, Lyn; Connelley, Rosalinda; Okurut-Ibore, Christine; McNamara, Lisa; Aljohani, Obaidalah

2013-01-01

An internal assessment was conducted utilizing a sociotechnical systems approach and cultural lens as a means of exploring the dynamics of a blended doctoral program. Blended learning environments were conceived of as sociotechnical systems, and blended programs were defined as programs that utilize multimodal means for the mediation of…

Optimization Based Data Mining Approah for Forecasting Real-Time Energy Demand

DOE Office of Scientific and Technical Information (OSTI.GOV)

Omitaomu, Olufemi A; Li, Xueping; Zhou, Shengchao

The worldwide concern over environmental degradation, increasing pressure on electric utility companies to meet peak energy demand, and the requirement to avoid purchasing power from the real-time energy market are motivating the utility companies to explore new approaches for forecasting energy demand. Until now, most approaches for forecasting energy demand rely on monthly electrical consumption data. The emergence of smart meters data is changing the data space for electric utility companies, and creating opportunities for utility companies to collect and analyze energy consumption data at a much finer temporal resolution of at least 15-minutes interval. While the data granularity providedmore » by smart meters is important, there are still other challenges in forecasting energy demand; these challenges include lack of information about appliances usage and occupants behavior. Consequently, in this paper, we develop an optimization based data mining approach for forecasting real-time energy demand using smart meters data. The objective of our approach is to develop a robust estimation of energy demand without access to these other building and behavior data. Specifically, the forecasting problem is formulated as a quadratic programming problem and solved using the so-called support vector machine (SVM) technique in an online setting. The parameters of the SVM technique are optimized using simulated annealing approach. The proposed approach is applied to hourly smart meters data for several residential customers over several days.« less

Utility-Weighted Modified Rankin Scale as Primary Outcome in Stroke Trials

PubMed Central

Voormolen, Daphne C.; Venema, Esmee; Roozenbeek, Bob; Polinder, Suzanne; Haagsma, Juanita A.; Nieboer, Daan; Chalos, Vicky; Yoo, Albert J.; Schreuders, Jennifer; van der Lugt, Aad; Majoie, Charles B.L.M.; Roos, Yvo B.W.E.M.; van Zwam, Wim H.; van Oostenbrugge, Robert J.; Steyerberg, Ewout W.; Dippel, Diederik W.J.; Lingsma, Hester F.

2018-01-01

Background and Purpose— The utility-weighted modified Rankin Scale (UW-mRS) has been proposed as a new patient-centered primary outcome in stroke trials. We aimed to describe utility weights for the mRS health states and to evaluate the statistical efficiency of the UW-mRS to detect treatment effects in stroke intervention trials. Methods— We used data of the 500 patients enrolled in the MR CLEAN (Multicenter Randomized Clinical Trial of Endovascular Treatment for Acute Ischemic Stroke in the Netherlands). Utility values were elicited from the EuroQol Group 5-Dimension Self-Report Questionnaire assessed at 90 days after inclusion, simultaneously with the mRS. Utility weights were determined by averaging the utilities of all patients within each mRS category. We performed simulations to evaluate statistical efficiency. The simulated treatment effect was an odds ratio of 1.65 in favor of the treatment arm, similar for all mRS cutoffs. This treatment effect was analyzed using 3 approaches: linear regression with the UW-mRS as outcome, binary logistic regression with a dichotomized mRS (0–1/2–6, 0–2/3–6, and 0–4/5–6), and proportional odds logistic regression with the ordinal mRS. The statistical power of the 3 approaches was expressed as the proportion of 10 000 simulations that resulted in a statistically significant treatment effect (P≤0.05). Results— The mean utility values (SD) for mRS categories 0 to 6 were: 0.95 (0.08), 0.93 (0.13), 0.83 (0.21), 0.62 (0.27), 0.42 (0.28), 0.11 (0.28), and 0 (0), respectively, but varied substantially between individual patients within each category. The UW-mRS approach was more efficient than the dichotomous approach (power 85% versus 71%) but less efficient than the ordinal approach (power 85% versus 87%). Conclusions— The UW-mRS as primary outcome does not capture individual variation in utility values and may reduce the statistical power of a randomized trial. PMID:29535271

Trading Water Conservation Credits: A Coordinative Approach for Enhanced Urban Water Reliability

NASA Astrophysics Data System (ADS)

Gonzales, P.; Ajami, N. K.

2016-12-01

Water utilities in arid and semi-arid regions are increasingly relying on water use efficiency and conservation to extend the availability of supplies. Despite spatial and institutional inter-dependency of many service providers, these demand-side management initiatives have traditionally been tackled by individual utilities operating in a silo. In this study, we introduce a new approach to water conservation that addresses regional synergies—a novel system of tradable water conservation credits. Under the proposed approach, utilities have the flexibility to invest in water conservation measures that are appropriate for their specific service area. When utilities have insufficient capacity for local cost-effective measures, they may opt to purchase credits, contributing to fund subsidies for utilities that do have that capacity and can provide the credits, while the region as whole benefits from more reliable water supplies. While similar programs have been used to address water quality concerns, to our knowledge this is one of the first studies proposing tradable credits for incentivizing water conservation. Through mathematical optimization, this study estimates the potential benefits of a trading program and demonstrates the institutional and economic characteristics needed for such a policy to be viable, including a proposed web platform to facilitate transparent regional planning, data-driven decision-making, and enhanced coordination of utilities. We explore the impacts of defining conservation targets tailored to local realities of utilities, setting credit prices, and different policy configurations. We apply these models to the case study of water utility members of the Bay Area Water Supply and Conservation Agency. Preliminary work shows that the diverse characteristics of these utilities present opportunities for the region to achieve conservation goals while maximizing the benefits to individual utilities through more flexible coordinative efforts.

An integrated model of learning.

PubMed

Trigg, A M; Cordova, F D

1987-01-01

Worldwide, most educational systems are based on three levels of education that utilize the pedagogical approaches to learning. In the 1960s, scholars formulated another approach to education that has become known as andragogy and has been applied to adult education. Several innovative scholars have seen how andragogy can be applied to teaching children. As a result, both andragogy and pedagogy are viewed as the opposite ends of the educational spectrum. Both of these approaches have a place and function within the modern educational framework. If one assumes that the goal of education is for the acquisition and application of knowledge, then both of these approaches can be used effectively for the attainment of that goal. In order to utilize these approaches effectively, an integrated model of learning has been developed that consists of initial teaching and exploratory learning phases. This model has both the directive and flexible qualities found in the theories of pedagogy and andragogy. With careful consideration and analysis this educational model can be utilized effectively within most educational systems.

Model-based Utility Functions

NASA Astrophysics Data System (ADS)

Hibbard, Bill

2012-05-01

Orseau and Ring, as well as Dewey, have recently described problems, including self-delusion, with the behavior of agents using various definitions of utility functions. An agent's utility function is defined in terms of the agent's history of interactions with its environment. This paper argues, via two examples, that the behavior problems can be avoided by formulating the utility function in two steps: 1) inferring a model of the environment from interactions, and 2) computing utility as a function of the environment model. Basing a utility function on a model that the agent must learn implies that the utility function must initially be expressed in terms of specifications to be matched to structures in the learned model. These specifications constitute prior assumptions about the environment so this approach will not work with arbitrary environments. But the approach should work for agents designed by humans to act in the physical world. The paper also addresses the issue of self-modifying agents and shows that if provided with the possibility to modify their utility functions agents will not choose to do so, under some usual assumptions.

Photovoltaics and electric utilities

NASA Astrophysics Data System (ADS)

Bright, R.; Leigh, R.; Sills, T.

1981-12-01

The long term value of grid connected, residential photovoltaic (PV) systems is determined. The value of the PV electricity is defined as the full avoided cost in accordance with the Public Utilities Regulatory Policies Act of 1978. The avoided cost is computed using a long range utility planning approach to measure revenue requirement changes in response to the time phased introduction of PV systems into the grid. A case study approach to three utility systems is used. The changing value of PV electricity over a twenty year period from 1985 is presented, and the fuel and capital savings due to FY are analyzed. These values are translated into measures of breakeven capital investment under several options of power interchange and pricing.

Integrating fisheries approaches and household utility models for improved resource management.

PubMed

Milner-Gulland, E J

2011-01-25

Natural resource management is littered with cases of overexploitation and ineffectual management, leading to loss of both biodiversity and human welfare. Disciplinary boundaries stifle the search for solutions to these issues. Here, I combine the approach of management strategy evaluation, widely applied in fisheries, with household utility models from the conservation and development literature, to produce an integrated framework for evaluating the effectiveness of competing management strategies for harvested resources against a range of performance metrics. I demonstrate the strengths of this approach with a simple model, and use it to examine the effect of manager ignorance of household decisions on resource management effectiveness, and an allocation tradeoff between monitoring resource stocks to reduce observation uncertainty and monitoring users to improve compliance. I show that this integrated framework enables management assessments to consider household utility as a direct metric for system performance, and that although utility and resource stock conservation metrics are well aligned, harvest yield is a poor proxy for both, because it is a product of household allocation decisions between alternate livelihood options, rather than an end in itself. This approach has potential far beyond single-species harvesting in situations where managers are in full control; I show that the integrated approach enables a range of management intervention options to be evaluated within the same framework.

Planning satellite communication services and spectrum-orbit utilization

NASA Technical Reports Server (NTRS)

Sawitz, P. H.

1982-01-01

The relationship between approaches to planning satellite communication services and spectrum-orbit utilization is considered, with emphasis on the fixed-satellite and the broadcasting-satellite services. It is noted that there are several possible approaches to planning space services, differing principally in the rigidity with which technical parameters are prescribed, in the time for which a plan remains in force, and in the procedures adopted for implementation and modifications. With some planning approaches, spectrum-orbit utilization is fixed at the time the plan is made. Others provide for greater flexibility by making it possible to postpone some decisions on technical parameters. In addition, the two political questions of what is equitable access and how it can be guaranteed in practice play an important role.

Single-incision laparoscopic surgery through an ostomy site: a natural approach by an unnatural orifice.

PubMed

Lopez, Nicole E; Peterson, Carrie Y; Ramamoorthy, Sonia L; McLemore, Elisabeth C; Sedrak, Michael F; Lowy, Andrew M; Horgan, Santiago; Talamini, Mark A; Sicklick, Jason K

2015-02-01

Single-incision laparoscopic surgery (SILS) is gaining popularity for a wide variety of surgical operations and capitalizes on the benefits of traditional laparoscopic surgery without incurring multiple incision sites. Traditionally, SILS is performed by a midline periumbilical approach. However, such a minimally invasive approach may be utilized in patients who already have an abdominal incision. Our series retrospectively reviews 7 cases in which we utilized the fascial defect at the time of after ostomy reversal as our SILS incision site. In turn, we performed a variety of concurrent intra-abdominal procedures with excellent technical success and outcomes. Our study is the largest single-institution case series of this novel approach and suggests that utilizing an existing ostomy-site abdominal incision is a safe and effective location for SILS port placement and should be considered in patients undergoing concurrent procedures.

Photovoltaic technology for sustainability: An investigation of the distributed utility concept as a policy framework

NASA Astrophysics Data System (ADS)

Letendre, Steven Emery

The U.S. electric utility sector in its current configuration is unsustainable. The majority of electricity in the United States is produced using finite fossil fuels. In addition, significant potential exists to improve the nation's efficient use of energy. A sustainable electric utility sector will be characterized by increased use of renewable energy sources and high levels of end-use efficiency. This dissertation analyzes two alternative policy approaches designed to move the U.S. electric utility sector toward sustainability. One approach is labeled incremental which involves maintaining the centralized structure of the electric utility sector but facilitating the introduction of renewable energy and efficiency into the electrical system through the pricing mechanism. A second policy approach was described in which structural changes are encouraged based on the emerging distributed utility (DU) concept. A structural policy orientation attempts to capture the unique localized benefits that distributed renewable resources and energy efficiency offer to electric utility companies and their customers. A market penetration analysis of PV in centralized energy supply and distributed peak-shaving applications is conducted for a case-study electric utility company. Sensitivity analysis was performed based on incremental and structural policy orientations. The analysis provides compelling evidence which suggests that policies designed to bring about structural change in the electric utility sector are needed to move the industry toward sustainability. Specifically, the analysis demonstrates that PV technology, a key renewable energy option likely to play an important role in a renewable energy future, will begin to penetrate the electrical system in distributed peak-shaving applications long before the technology is introduced as a centralized energy supply option. Most policies to date, which I term incremental, attempt to encourage energy efficiency and renewables through the pricing system. Based on past policy experience, it is unlikely that such an approach would allow PV to compete in Delaware as an energy supply option in the next ten to twenty years. Alternatively, a market-based, or green pricing, approach will not create significant market opportunities for PV as a centralized energy supply option. However, structural policies designed to encourage the explicit recognition of the localized benefits of distributed resources could result in PV being introduced into the electrical system early in the next century.

Targeted prodrugs in oral drug delivery: the modern molecular biopharmaceutical approach.

PubMed

Dahan, Arik; Khamis, Mustafa; Agbaria, Riad; Karaman, Rafik

2012-08-01

The molecular revolution greatly impacted the field of drug design and delivery in general, and the utilization of the prodrug approach in particular. The increasing understanding of membrane transporters has promoted a novel 'targeted-prodrug' approach utilizing carrier-mediated transport to increase intestinal permeability, as well as specific enzymes to promote activation to the parent drug. This article provides the reader with a concise overview of this modern approach to prodrug design. Targeting the oligopeptide transporter PEPT1 for absorption and the serine hydrolase valacyclovirase for activation will be presented as examples for the successful utilization of this approach. Additionally, the use of computational approaches, such as DFT and ab initio molecular orbital methods, in modern prodrugs design will be discussed. Overall, in the coming years, more and more information will undoubtedly become available regarding intestinal transporters and potential enzymes that may be exploited for the targeted modern prodrug approach. Hence, the concept of prodrug design can no longer be viewed as merely a chemical modification to solve problems associated with parent compounds. Rather, it opens promising opportunities for precise and efficient drug delivery, as well as enhancement of treatment options and therapeutic efficacy.

Resection of a Retrochiasmatic Craniopharyngioma by Combined Modified Orbital Craniotomy and Transnasal Endoscopic Techniques.

PubMed

Patel, Nirav J; Dunn, Ian

2018-04-01

A 20-year-old patient presented with hydrocephalus but intact vision and hormone function. The MRI showed a large seller, suprasellar and third ventricular mass. We chose a combined approach utilizing the translyvian, lamina terminals route, with a possible interhemispheric approach. But, we also utilized a transnasal endoscopic approach for the tumor that remained below the diaphragma sellae. The patient did well, with complete tumor resection via a staged approach, but did require hormone replacement. The link to the video can be found at: https://youtu.be/yzpfOxzI4cQ .

Decision and cost-utility analyses of surgical versus transcatheter closure of patent ductus arteriosus: should you let a smile be your umbrella?

PubMed

Gray, D T; Weinstein, M C

1998-01-01

Decision and cost-utility analyses considered the tradeoffs of treating patent ductus arteriosus (PDA) using conventional surgery versus transcatheter implantation of the Rashkind occluder. Physicians and informed lay parents assigned utility scores to procedure success/complications combinations seen in prognostically similar pediatric patients with isolated PDA treated from 1982 to 1987. Utility scores multiplied by outcome frequencies from a comparative study generated expected utility values for the two approaches. Cost-utility analyses combined these results with simulated provider cost estimates from 1989. On a 0-100 scale (worst to best observed outcome), the median expected utility for surgery was 99.96, versus 98.88 for the occluder. Results of most sensitivity analyses also slightly favored surgery. Expected utility differences based on 1987 data were minimal. With a mean overall simulated cost of $8,838 vs $12,466 for the occluder, surgery was favored in most cost-utility analyses. Use of the inherently less invasive but less successful, more risky, and more costly occluder approach conferred no apparent net advantage in this study. Analyses of comparable current data would be informative.

LightForce Photon-Pressure Collision Avoidance: Updated Efficiency Analysis Utilizing a Highly Parallel Simulation Approach

DTIC Science & Technology

2014-09-01

simulation time frame from 30 days to one year. This was enabled by porting the simulation to the Pleiades supercomputer at NASA Ames Research Center, a...including the motivation for changes to our past approach. We then present the software implementation (3) on the NASA Ames Pleiades supercomputer...significantly updated since last year’s paper [25]. The main incentive for that was the shift to a highly parallel approach in order to utilize the Pleiades

Creating markets for captured carbon: Retrofit of Abbott Power Plant and Future Utilization of Captured CO 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Brien, Kevin C.; Lu, Yongqi; Patel, Vinod

The successful implementation of CCUS requires the confluence of technology, regulatory, and financial factors. One of the factors that impact this confluence is the ability to utilize and monetize captured CO 2. The generally accepted utilization approach has been CO 2-based Enhanced Oil Recovery (EOR), yet this is not always feasible and/or a preferable approach. There is a need to be able to explore a multitude of utilization approaches in order to identify a portfolio of potential utilization mechanisms. This portfolio must be adapted based on the economy of the region. In response to this need, the University of Illinoismore » has formed a Carbon Dioxide Utilization and Reduction (COOULR) Center. The open nature of the university, coupled with a university policy to reduce CO 2 emissions, provides a model for the issues communities will face when attempting to reduce emissions while still maintaining reliable and affordable power. This Center is one of the key steps in the formation of a market for captured CO 2. Furthermore, the goal of the Center is to not only evaluate technologies, but also demonstrate at a large pilot scale how communities may be able to adjust to the need to reduce GHG emissions.« less

Creating markets for captured carbon: Retrofit of Abbott Power Plant and Future Utilization of Captured CO 2

DOE PAGES

O'Brien, Kevin C.; Lu, Yongqi; Patel, Vinod; ...

2017-01-01

The successful implementation of CCUS requires the confluence of technology, regulatory, and financial factors. One of the factors that impact this confluence is the ability to utilize and monetize captured CO 2. The generally accepted utilization approach has been CO 2-based Enhanced Oil Recovery (EOR), yet this is not always feasible and/or a preferable approach. There is a need to be able to explore a multitude of utilization approaches in order to identify a portfolio of potential utilization mechanisms. This portfolio must be adapted based on the economy of the region. In response to this need, the University of Illinoismore » has formed a Carbon Dioxide Utilization and Reduction (COOULR) Center. The open nature of the university, coupled with a university policy to reduce CO 2 emissions, provides a model for the issues communities will face when attempting to reduce emissions while still maintaining reliable and affordable power. This Center is one of the key steps in the formation of a market for captured CO 2. Furthermore, the goal of the Center is to not only evaluate technologies, but also demonstrate at a large pilot scale how communities may be able to adjust to the need to reduce GHG emissions.« less

Tradeoffs in Risk and Return of Financial Hedging Solutions to Mitigate Drought-Related Financial Risks for Water Utilities

NASA Astrophysics Data System (ADS)

Baum, R.; Characklis, G. W.

2016-12-01

Financial hedging solutions have been examined as tools for effectively mitigating water scarcity related financial risks for water utilities, and have become more prevalent as conservation (resulting in reduced revenues) and water transfers (resulting in increased costs) play larger roles in drought management. Individualized financial contracts (i.e. designed for a single utility) provide evidence of the potential benefits of financial hedging. However, individualized contracts require substantial time and information to develop, limiting their widespread implementation. More generalized contracts have also shown promise, and would allow the benefits of risk pooling to be more effectively realized, resulting in less expensive contracts. Risk pooling reduces the probability of an insurer making payouts that deviate significantly from the mean, but given that the financial risks of drought are spatially correlated amongst utilities, these more extreme "fat tail" risks remain. Any group offering these hedging contracts, whether a third-party insurer or a "mutual" comprised of many utilities, will need to balance the costs (i.e. additional risk) and benefits (i.e. returns) of alternative approaches to managing the extreme risks (e.g. through insurance layers). The balance of these different approaches will vary depending on the risk pool being considered, including the number, size and exposure of the participating utilities. This work first establishes a baseline of the tradeoffs between risk and expected return in insuring against the financial risks of water scarcity without alternative hedging approaches for water utilities across all climate divisions of the United States. Then various scenarios are analyzed to provide insight into how to maximize returns for risk pooling portfolios at various risk levels through balancing different insurance layers and hedging approaches. This analysis will provide valuable information for designing optimal financial risk management strategies for water utilities across the United States.

Thoracoscopic Vs open resection of congenital cystic lung disease- utilization and outcomes in 1120 children in the United States.

PubMed

Polites, Stephanie F; Habermann, Elizabeth B; Zarroug, Abdalla E; Thomsen, Kristine M; Potter, Donald D

2016-07-01

To determine if utilization of thoracoscopic resection of congenital cystic lung disease (CLD) is increasing and if this approach is associated with improved outcomes using a large national sample. Children ≤20years old who underwent resection of a congenital cystic adenomatoid malformation, bronchopulmonary sequestration, or bronchogenic cyst were identified from the Healthcare Cost and Utilization Project Kids' Inpatient Database (2009, 2012) and Nationwide Inpatient Sample (2008, 2010-2011). Patient characteristics and outcomes were compared between thoracoscopic and open approaches using univariate and multivariable analyses stratified by magnitude of resection. Thoracoscopic resection was used in 39.4% of 1120 children who underwent resection of CLD. Utilization of the thoracoscopic approach increased from 32.2% in 2008 to 48.2% in 2012. Use of thoracoscopy was lower in lobectomy than segmental resection (32.5 vs 48.4%, p<.001). Newborns, those with comorbid congenital conditions, and those with respiratory infections also had lower rates of thoracoscopy. After stratifying by magnitude of resection and adjusting for patient complexity, complication rates and postoperative length of stay were similar between thoracoscopic and open approaches. Utilization of thoracoscopic resection for CLD in the United States is increasing with time. After adjusting for patient complexity, there is no difference in postoperative length of stay or complications between thoracoscopic and open lobectomy and sub-lobar resection. Copyright © 2016 Elsevier Inc. All rights reserved.

An effective utilization management strategy by dual approach of influencing physician ordering and gate keeping.

PubMed

Elnenaei, Manal O; Campbell, Samuel G; Thoni, Andrea J; Lou, Amy; Crocker, Bryan D; Nassar, Bassam A

2016-02-01

There is increasing recognition of the importance of appropriate laboratory test utilization. We investigate the effect of a multifaceted educational approach that includes physician feedback on individual test ordering, in conjunction with targeted restriction, on the utilization of selected laboratory tests. Scientific evidence was compiled on the usefulness and limitations of tests suspected of being over utilized in our laboratories. A variety of approaches were used to deliver education on each of the targeted tests, with greater focus on primary care physicians (PCPs). Feedback on requesting behavior of these tests was also communicated to the latter group which included an educational component. Laboratory based restriction of testing was also exercised, including the unbundling of our electrolyte panel. PCP requesting patterns for the selected tests were found to be markedly skewed. The interventions implemented over the study period resulted in a substantial 51% reduction in overall ordering of five of the targeted tests equating to an annual marginal cost saving of $60,124. Unbundling of the electrolyte panel resulted in marginal cost savings that equated annually to $42,500 on chloride and $48,000 on total CO2. A multifaceted educational approach combined with feedback on utilization and laboratory driven gate-keeping significantly reduced the number of laboratory tests suspected of being redundant or unjustifiably requested. Laboratory professionals are well positioned to manage demand on laboratory tests by utilizing evidence base in developing specific test ordering directives and gate-keeping rules. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

A Multimethod Assessment of Juvenile Psychopathy: Comparing the Predictive Utility of the PCL:YV, YPI, and NEO PRI

ERIC Educational Resources Information Center

Cauffman, Elizabeth; Kimonis, Eva R.; Dmitrieva, Julia; Monahan, Kathryn C.

2009-01-01

The current study compares 3 distinct approaches for measuring juvenile psychopathy and their utility for predicting short- and long-term recidivism among a sample of 1,170 serious male juvenile offenders. The assessment approaches compared a clinical interview method (the Psychopathy Checklist: Youth Version [PCL:YV]; Forth, Kosson, & Hare,…

Public versus private: does it matter for water conservation? Insights from California.

PubMed

Kallis, Giorgos; Ray, Isha; Fulton, Julian; McMahon, James E

2010-01-01

This article asks three connected questions: First, does the public view private and public utilities differently, and if so, does this affect attitudes to conservation? Second, do public and private utilities differ in their approaches to conservation? Finally, do differences in the approaches of the utilities, if any, relate to differences in public attitudes? We survey public attitudes in California toward (hypothetical but plausible) voluntary and mandated water conservation, as well as to price increases, during a recent period of shortage. We do this by interviewing households in three pairs of adjacent public and private utilities. We also survey managers of public and private urban water utilities to see if they differ in their approaches to conservation and to their customers. On the user side we do not find pronounced differences, though a minority of customers in all private companies would be more willing to conserve or pay higher prices under a public operator. No respondent in public utility said the reverse. Negative attitudes toward private operators were most pronounced in the pair marked by a controversial recent privatization and a price hike. Nonetheless, we find that California's history of recurrent droughts and the visible role of the state in water supply and drought management undermine the distinction between public and private. Private utilities themselves work to underplay the distinction by stressing the collective ownership of the water source and the collective value of conservation. Overall, California's public utilities appear more proactive and target-oriented in asking their customers to conserve than their private counterparts and the state continues to be important in legitimating and guiding conservation behavior, whether the utility is in public hands or private.

Public Versus Private: Does It Matter for Water Conservation? Insights from California

NASA Astrophysics Data System (ADS)

Kallis, Giorgos; Ray, Isha; Fulton, Julian; McMahon, James E.

2010-01-01

This article asks three connected questions: First, does the public view private and public utilities differently, and if so, does this affect attitudes to conservation? Second, do public and private utilities differ in their approaches to conservation? Finally, do differences in the approaches of the utilities, if any, relate to differences in public attitudes? We survey public attitudes in California toward (hypothetical but plausible) voluntary and mandated water conservation, as well as to price increases, during a recent period of shortage. We do this by interviewing households in three pairs of adjacent public and private utilities. We also survey managers of public and private urban water utilities to see if they differ in their approaches to conservation and to their customers. On the user side we do not find pronounced differences, though a minority of customers in all private companies would be more willing to conserve or pay higher prices under a public operator. No respondent in public utility said the reverse. Negative attitudes toward private operators were most pronounced in the pair marked by a controversial recent privatization and a price hike. Nonetheless, we find that California’s history of recurrent droughts and the visible role of the state in water supply and drought management undermine the distinction between public and private. Private utilities themselves work to underplay the distinction by stressing the collective ownership of the water source and the collective value of conservation. Overall, California’s public utilities appear more proactive and target-oriented in asking their customers to conserve than their private counterparts and the state continues to be important in legitimating and guiding conservation behavior, whether the utility is in public hands or private.

Scoping study of integrated resource planning needs in the public utility sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garrick, C J; Garrick, J M; Rue, D R

Integrated resource planning (IRP) is an approach to utility resource planning that integrates the evaluation of supply- and demand-site options for providing energy services at the least cost. Many utilities practice IRP; however, most studies about IRP focus on investor-owned utilities (IOUs). This scoping study investigates the IRP activities and needs of public utilities (not-for-profit utilities, including federal, state, municipal, and cooperative utilities). This study (1) profiles IRP-related characteristics of the public utility sector, (2) articulates the needs of public utilities in understanding and implementing IRP, and (3) identifies strategies to advance IRP principles in public utility planning.

Protocol for a systematic review of preference-based instruments for measuring care-related outcomes and their suitability for the palliative care setting.

PubMed

McCaffrey, Nikki; Al-Janabi, Hareth; Currow, David; Hoefman, Renske; Ratcliffe, Julie

2016-09-12

Despite informal caregivers' integral role in supporting people affected by disease or disability, economic evaluations often ignore the costs and benefits experienced by this group, especially in the palliative setting. The purpose of this systematic review is to identify preference-based instruments for measuring care-related outcomes and provide guidance on the selection of instrument in palliative care economic evaluations. A comprehensive search of the literature will be conducted from database inception (ASSIA; CINAHL; Cochrane library including DARE, NHS EED, HTA; Econlit; Embase; PsychINFO; PubMed). Published peer-reviewed, English-language articles reporting preference-based instruments for measuring care-related outcomes in any clinical area will be included. One researcher will complete the searches and screen the results for potentially eligible studies. A randomly selected subset of 10% citations will be independently screened by two researchers. Any disagreement will be resolved by consensus among the research team. Subsequently, a supplementary search will identify studies detailing the development, valuation, validation and application of the identified instruments. The degree of suitability of the instruments for palliative economic evaluations will be assessed using criteria in the International Society for Quality of Life Research minimum standards for patient-reported outcome measures, the checklist for reporting valuation studies of multiattribute utility-based instruments and information on the development of the instrument in the palliative setting. A narrative summary of the included studies and instruments will be provided; similarities and differences will be described and possible reasons for variations explored. Recommendations for practice on selection of instruments in palliative care economic analyses will be provided. This is a planned systematic review of published literature. Therefore, ethics approval to conduct this research is not required. Findings will be presented at leading palliative care and health economic conferences and published in a peer-reviewed journal. CRD42016034188. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

The Emergent Capabilities of Distributed Satellites and Methods for Selecting Distributed Satellite Science Missions

NASA Astrophysics Data System (ADS)

Corbin, B. A.; Seager, S.; Ross, A.; Hoffman, J.

2017-12-01

Distributed satellite systems (DSS) have emerged as an effective and cheap way to conduct space science, thanks to advances in the small satellite industry. However, relatively few space science missions have utilized multiple assets to achieve their primary scientific goals. Previous research on methods for evaluating mission concepts designs have shown that distributed systems are rarely competitive with monolithic systems, partially because it is difficult to quantify the added value of DSSs over monolithic systems. Comparatively little research has focused on how DSSs can be used to achieve new, fundamental space science goals that cannot be achieved with monolithic systems or how to choose a design from a larger possible tradespace of options. There are seven emergent capabilities of distributed satellites: shared sampling, simultaneous sampling, self-sampling, census sampling, stacked sampling, staged sampling, and sacrifice sampling. These capabilities are either fundamentally, analytically, or operationally unique in their application to distributed science missions, and they can be leveraged to achieve science goals that are either impossible or difficult and costly to achieve with monolithic systems. The Responsive Systems Comparison (RSC) method combines Multi-Attribute Tradespace Exploration with Epoch-Era Analysis to examine benefits, costs, and flexible options in complex systems over the mission lifecycle. Modifications to the RSC method as it exists in previously published literature were made in order to more accurately characterize how value is derived from space science missions. New metrics help rank designs by the value derived over their entire mission lifecycle and show more accurate cumulative value distributions. The RSC method was applied to four case study science missions that leveraged the emergent capabilities of distributed satellites to achieve their primary science goals. In all four case studies, RSC showed how scientific value was gained that would be impossible or unsatisfactory with monolithic systems and how changes in design and context variables affected the overall mission value. Each study serves as a blueprint for how to conduct a Pre-Phase A study using these methods to learn more about the tradespace of a particular mission.

Parents' versus physicians' values for clinical outcomes in young febrile children.

PubMed

Kramer, M S; Etezadi-Amoli, J; Ciampi, A; Tange, S M; Drummond, K N; Mills, E L; Bernstein, M L; Leduc, D G

1994-05-01

To compare how parents and physicians value potential clinical outcomes in young children who have a fever but no focus of bacterial infection. Cross-sectional study of 100 parents of well children aged 3 to 24 months, 61 parents of febrile children aged 3 to 24 months, and 56 attending staff physicians working in a children's hospital emergency department. A pretested visual analog scale was used to assess values on a 0-to-1 scale (where 0 is the value of the worst possible outcome, and 1 is the value for the best) for 22 scenarios, grouped in three categories according to severity. Based on the three or four common attributes comprising the scenarios in a given group, each respondent's value function was estimated statistically based on multiattribute utility theory. For outcomes in group 1 (rapidly resolving viral infection with one or more diagnostic tests), no significant group differences were observed. For outcomes in groups 2 (acute infections without long-term sequelae) and 3 (long-term sequelae of urinary tract infection or bacterial meningitis), parents of well children and parents of febrile children had values that were similar to each other but significantly lower than physicians' values for pneumonia with delayed diagnosis, false-positive diagnosis of urinary tract infection, viral meningitis, and unilateral hearing loss. For bacterial meningitis with or without delay, however, the reverse pattern was observed; physicians' values were lower than parents'. In arriving at their judgment for group 2 and 3 scenarios, parents gave significantly greater weight to attributes involving the pain and discomfort of diagnostic tests and to diagnostic error, whereas physicians gave significantly greater weight to attributes involving both short- and long-term morbidity and long-term worry and inconvenience. Parents were significantly more likely to be risk-seeking in the way they weighted the attributes comprising group 2 and 3 scenarios than physicians, ie, they were more willing to risk rare but severe morbidity to avoid the short-term adverse effects of testing. Parents and physicians show fundamental value differences concerning diagnostic testing, diagnostic error, and short- and long-term morbidity; these differences have important implications for diagnostic decision making in the young febrile child.

The Effectiveness of Incorporating a Play-based Intervention to Improve Functional Mobility for a Child with Relapsed Acute Lymphoblastic Leukaemia: A Case Report.

PubMed

Vercher, Paula; Hung, You-Jou; Ko, Mansoo

2016-12-01

Acute lymphoblastic leukaemia (ALL) is one of the most common forms of cancer seen in children, accounting for one-fourth of all childhood cancers. These children typically present with decreased functional mobility, weakened lower extremity muscle strength and reduced exercise endurance and interests because of disease progressions and chemotherapy treatments. The purpose of this case report was to examine the effectiveness of incorporating a play-based physical therapy (PT) intervention programme to improve functional mobility for an inpatient with relapsed ALL undergoing chemotherapy. The patient was a 3-year-old male admitted to the hospital for relapsed ALL. He was diagnosed approximately 1 year earlier for which he had undergone chemotherapy and was later considered in remission at that time. When the patient relapsed, he underwent another round of chemotherapy and was waiting for a bone marrow transplant during his treatment during the course of this case report. For PT intervention, therapeutic exercises were incorporated into play to strengthen his lower extremity strength and muscle endurance. Functional activities were also incorporated into play to improve his aerobic capacity and overall quality of life. Multi-attribute health status classification system (HUI3) utility scores, 6-minute walk test distance (6MWT), lower extremity (LE) strength, transfer and tolerated treatment time were assessed to identify the effect of a PT intervention. Despite experiencing fatigue, the patient completed most of the treatments incorporated into play. After 5 weeks of PT intervention, the participant improved on HUI3 (pre: 0.72 and post: 0.92), 6MWT (pre: 156 ft and post: 489 ft), LE strength (squat), transfer (sit to stand) and tolerated treatment time (pre: 16 minutes and post: 44 minutes). This case report suggests that incorporating a play-based PT intervention programme could be physically tolerable and functionally beneficial for a young child with relapsed ALL undergoing inpatient chemotherapy. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

The effects of regional angling effort, angler behavior, and harvesting efficiency on landscape patterns of overfishing.

PubMed

Hunt, Len M; Arlinghaus, Robert; Lester, Nigel; Kushneriuk, Rob

2011-10-01

We used a coupled social-ecological model to study the landscape-scale patterns emerging from a mobile population of anglers exploiting a spatially structured walleye (Sander vitreus) fishery. We systematically examined how variations in angler behaviors (i.e., relative importance of walleye catch rate in guiding fishing site choices), harvesting efficiency (as implied by varying degrees of inverse density-dependent catchability of walleye), and angler population size affected the depletion of walleye stocks across 157 lakes located near Thunder Bay (Ontario, Canada). Walleye production biology was calibrated using lake-specific morphometric and edaphic features, and angler fishing site choices were modeled using an empirically grounded multi-attribute utility function. We found support for the hypothesis of sequential collapses of walleye stocks across the landscape in inverse proportionality of travel cost from the urban residence of anglers. This pattern was less pronounced when the regional angler population was low, density-dependent catchability was absent or low, and angler choices of lakes in the landscape were strongly determined by catch rather than non-catch-related attributes. Thus, our study revealed a systematic pattern of high catch importance reducing overfishing potential at low and aggravating overfishing potential at high angler population sizes. The analyses also suggested that density-dependent catchability might have more serious consequences for regional overfishing states than variations in angler behavior. We found little support for the hypotheses of systematic overexploitation of the most productive walleye stocks and homogenized catch-related qualities among lakes sharing similar access costs to anglers. Therefore, one should not expect anglers to systematically exploit the most productive fisheries or to equalize catch rates among lakes through their mobility and other behaviors. This study underscores that understanding landscape overfishing dynamics involves a careful appreciation of angler population size and how it interacts with the attributes that drive angler behaviors and depensatory mechanisms such as inverse density-dependent catchability. Only when all of these ingredients are considered and understood can one derive reasonably predictable patterns of overfishing in the landscape. These patterns range from self-regulating systems with low levels of regional fishing pressure to sequential collapse of walleye fisheries from the origin of angling effort.

Assessment of combating-desertification strategies using the linear assignment method

NASA Astrophysics Data System (ADS)

Hassan Sadeghravesh, Mohammad; Khosravi, Hassan; Ghasemian, Soudeh

2016-04-01

Nowadays desertification, as a global problem, affects many countries in the world, especially developing countries like Iran. With respect to increasing importance of desertification and its complexity, the necessity of attention to the optimal combating-desertification alternatives is essential. Selecting appropriate strategies according to all effective criteria to combat the desertification process can be useful in rehabilitating degraded lands and avoiding degradation in vulnerable fields. This study provides systematic and optimal strategies of combating desertification by use of a group decision-making model. To this end, the preferences of indexes were obtained through using the Delphi model, within the framework of multi-attribute decision making (MADM). Then, priorities of strategies were evaluated by using linear assignment (LA) method. According to the results, the strategies to prevent improper change of land use (A18), development and reclamation of plant cover (A23), and control overcharging of groundwater resources (A31) were identified as the most important strategies for combating desertification in this study area. Therefore, it is suggested that the aforementioned ranking results be considered in projects which control and reduce the effects of desertification and rehabilitate degraded lands.

Measurements of Rationality: Individual Differences in Information Processing, the Transitivity of Preferences and Decision Strategies

PubMed Central

Sleboda, Patrycja; Sokolowska, Joanna

2017-01-01

The first goal of this study was to validate the Rational-Experiential Inventory (REI) and the Cognitive Reflection Test (CRT) through checking their relation to the transitivity axiom. The second goal was to test the relation between decision strategies and cognitive style as well as the relation between decision strategies and the transitivity of preferences. The following characteristics of strategies were investigated: requirements for trade-offs, maximization vs. satisficing and option-wise vs. attribute-wise information processing. Respondents were given choices between two multi-attribute options. The options were designed so that the choice indicated which strategy was applied. Both the REI-R and the CRT were found to be good predictors of the transitivity of preferences. Respondents who applied compensatory strategies and the maximization criterion scored highly on the REI-R and in the CRT, whereas those who applied the satisficing rule scored highly on the REI-R but not in the CRT. Attribute-wise information processing was related to low scores in both measurements. Option-wise information processing led to a high transitivity of preferences. PMID:29093695

Maclaurin symmetric mean operators of linguistic intuitionistic fuzzy numbers and their application to multiple-attribute decision-making

NASA Astrophysics Data System (ADS)

Liu, Peide; Qin, Xiyou

2017-11-01

Linguistic intuitionistic fuzzy number (LIFN) is a special intuitionistic fuzzy number which can more easily describe the vagueness existing in the real decision-making. Maclaurin symmetric mean (MSM) operator has the characteristic of considering the interrelationships among any number of input parameters. In this paper, we extended the MSM operator to the LIFNs and some extended MSM operators for LIFNs were proposed, some new decision-making methods were developed. Firstly, we introduced the definition, score function, properties and operational rules of the LIFNs. Then, we proposed some linguistic intuitionistic fuzzy MSM operators, such as linguistic intuitionistic fuzzy Maclaurin symmetric mean operator, weighted linguistic intuitionistic fuzzy Maclaurin symmetric mean (WLIFMSM) operator, linguistic intuitionistic fuzzy dual Maclaurin symmetric mean operator, weighted linguistic intuitionistic fuzzy dual Maclaurin symmetric mean (WLIFDMSM) operator. In the meantime, we studied some important properties of these operators, and developed some methods based on WLIFMSM operator and WLIFDMSM operator for multi-attribute decision-making. Finally, we use an example to demonstrate the effectiveness of the proposed methods.

Eye Movements in Strategic Choice

PubMed Central

Gächter, Simon; Noguchi, Takao; Mullett, Timothy L.

2015-01-01

Abstract In risky and other multiattribute choices, the process of choosing is well described by random walk or drift diffusion models in which evidence is accumulated over time to threshold. In strategic choices, level‐k and cognitive hierarchy models have been offered as accounts of the choice process, in which people simulate the choice processes of their opponents or partners. We recorded the eye movements in 2 × 2 symmetric games including dominance‐solvable games like prisoner's dilemma and asymmetric coordination games like stag hunt and hawk–dove. The evidence was most consistent with the accumulation of payoff differences over time: we found longer duration choices with more fixations when payoffs differences were more finely balanced, an emerging bias to gaze more at the payoffs for the action ultimately chosen, and that a simple count of transitions between payoffs—whether or not the comparison is strategically informative—was strongly associated with the final choice. The accumulator models do account for these strategic choice process measures, but the level‐k and cognitive hierarchy models do not. © 2015 The Authors. Journal of Behavioral Decision Making published by John Wiley & Sons Ltd. PMID:27513881

The importance of environmental quality and catch potential to fishing site selection by freshwater anglers in Mississippi

USGS Publications Warehouse

Schramm, H.L.; Gerard, P.D.; Gill, D.A.

2003-01-01

We measured the importance of 24 fishing site attributes to Mississippi freshwater anglers. Factor analysis identified four multiattribute factors as important in the selection of fishing location: CLEAN ENVIRONMENT CATCH, COST AND HARVEST and AMENITIES AND SAFETY. In general, the importance of site selection factors differed little among anglers grouped by preferred type of fish, preferred fishing location (lakes and reservoirs, rivers and streams, ponds, or reservoir tailwaters), usual manner of fishing (engine-powered boat, nonpowered boat, or shore), or change in fishing frequency. COST AND HARVEST was more important to anglers with high harvest orientations. We found low correlations between site selection factor importance scores and angler age, fishing frequency, fishing expenditures, or fishing motivation factors. We suggest that the general lack of differences in site selection factors among angler groups indicates that management strategies to improve fishing site attributes should benefit all angler groups. Clean fishing environments and awareness of the availability of desired sport fishes were "very" or "extremely" important to fishing site selection by more than 70% of Mississippi freshwater anglers and should be priority management objectives.

Measurements of Rationality: Individual Differences in Information Processing, the Transitivity of Preferences and Decision Strategies.

PubMed

Sleboda, Patrycja; Sokolowska, Joanna

2017-01-01

The first goal of this study was to validate the Rational-Experiential Inventory ( REI ) and the Cognitive Reflection Test ( CRT ) through checking their relation to the transitivity axiom. The second goal was to test the relation between decision strategies and cognitive style as well as the relation between decision strategies and the transitivity of preferences. The following characteristics of strategies were investigated: requirements for trade-offs, maximization vs. satisficing and option-wise vs. attribute-wise information processing. Respondents were given choices between two multi-attribute options. The options were designed so that the choice indicated which strategy was applied. Both the REI-R and the CRT were found to be good predictors of the transitivity of preferences. Respondents who applied compensatory strategies and the maximization criterion scored highly on the REI-R and in the CRT , whereas those who applied the satisficing rule scored highly on the REI-R but not in the CRT . Attribute-wise information processing was related to low scores in both measurements. Option-wise information processing led to a high transitivity of preferences.

Conceptual and logical level of database modeling

NASA Astrophysics Data System (ADS)

Hunka, Frantisek; Matula, Jiri

2016-06-01

Conceptual and logical levels form the top most levels of database modeling. Usually, ORM (Object Role Modeling) and ER diagrams are utilized to capture the corresponding schema. The final aim of business process modeling is to store its results in the form of database solution. For this reason, value oriented business process modeling which utilizes ER diagram to express the modeling entities and relationships between them are used. However, ER diagrams form the logical level of database schema. To extend possibilities of different business process modeling methodologies, the conceptual level of database modeling is needed. The paper deals with the REA value modeling approach to business process modeling using ER-diagrams, and derives conceptual model utilizing ORM modeling approach. Conceptual model extends possibilities for value modeling to other business modeling approaches.

A Conceptual Framework for Studying Knowledge Utilization.

ERIC Educational Resources Information Center

Paul, Douglas

This paper, written from an organizational perspective, begins with an examination of the deficiencies of knowledge utilization and educational change literature. It suggests the explication of descriptive and heuristic conceptual dimensions as one approach for facilitating a descriptive perspective of knowldge utilization. The efficacy of three…

Diminishing Marginal Utility in Economics Textbooks

ERIC Educational Resources Information Center

Dittmer, Timothy

2005-01-01

Many introductory microeconomics textbook authors derive the law of demand from the assumption of diminishing marginal utility. Authors of intermediate and graduate textbooks derive demand from diminishing marginal rate of substitution and ordinal preferences. These approaches are not interchangeable; diminishing marginal utility for all goods is…

Space station utilization and commonality

NASA Technical Reports Server (NTRS)

Butler, John

1986-01-01

Several potential ways of utilizing the space station, including utilization of learning experiences (such as operations), utilization of specific elements of hardware which can be largely common between the SS and Mars programs, and utilization of the on-orbit SS for transportation node functions were identified and discussed. The probability of using the SS in all of these areas seems very good. Three different ways are discussed of utilizing the then existing Low Earth Orbit (LEO) SS for operational support during assembly and checkout of the Mars Space Vehicle (SV): attaching the SV to the SS; allowing the SV to co-orbit near the SS; and a hybrid of the first 2 ways. Discussion of each of these approaches is provided, and the conclusion is reached that either the co-orbiting or hybrid approach might be preferable. Artists' conception of the modes are provided, and sketches of an assembly system concept (truss structure and subsystems derivable from the SS) which could be used for co-orbiting on-orbit assembly support are provided.

Diabetes Care Management Teams Did Not Reduce Utilization When Compared With Traditional Care: A Randomized Cluster Trial.

PubMed

Kearns, Patrick

2017-10-01

PURPOSE: Health services research evaluates redesign models for primary care. Care management is one alternative. Evaluation includes resource utilization as a criterion. Compare the impact of care-manager teams on resource utilization. The comparison includes entire panes of patients and the subset of patients with diabetes. DESIGN: Randomized, prospective, cohort study comparing change in utilization rates between groups, pre- and post-intervention. METHODOLOGY: Ten primary care physician panels in a safety-net setting. Ten physicians were randomized to either a care-management approach (Group 1) or a traditional approach (Group 2). Care managers focused on diabetes and the cardiovascular cluster of diseases. Analysis compared rates of hospitalization, 30-day readmission, emergency room visits, and urgent care visits. Analysis compared baseline rates to annual rates after a yearlong run-in for entire panels and the subset of patients with diabetes. RESULTS: Resource utilization showed no statistically significant change between baseline and Year 3 (P=.79). Emergency room visits and hospital readmission increased for both groups (P=.90), while hospital admissions and urgent care visits decreased (P=.73). Similarly, utilization was not significantly different for patients with diabetes (P=.69). CONCLUSIONS: A care-management team approach failed to improve resource utilization rates by entire panels and the subset of diabetic patients compared to traditional care. This reinforces the need for further evidentiary support for the care-management model's hypothesis in the safety net.

Network approach for decision making under risk—How do we choose among probabilistic options with the same expected value?

PubMed Central

Chen, Yi-Shin

2018-01-01

Conventional decision theory suggests that under risk, people choose option(s) by maximizing the expected utility. However, theories deal ambiguously with different options that have the same expected utility. A network approach is proposed by introducing ‘goal’ and ‘time’ factors to reduce the ambiguity in strategies for calculating the time-dependent probability of reaching a goal. As such, a mathematical foundation that explains the irrational behavior of choosing an option with a lower expected utility is revealed, which could imply that humans possess rationality in foresight. PMID:29702665

Network approach for decision making under risk-How do we choose among probabilistic options with the same expected value?

PubMed

Pan, Wei; Chen, Yi-Shin

2018-01-01

Conventional decision theory suggests that under risk, people choose option(s) by maximizing the expected utility. However, theories deal ambiguously with different options that have the same expected utility. A network approach is proposed by introducing 'goal' and 'time' factors to reduce the ambiguity in strategies for calculating the time-dependent probability of reaching a goal. As such, a mathematical foundation that explains the irrational behavior of choosing an option with a lower expected utility is revealed, which could imply that humans possess rationality in foresight.

Lessons Learned: Community Solar for Municipal Utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

This report outlines the work that STAT has completed, discusses the range of approaches utilities are taking, and highlights several challenges municipal utilities face in deciding whether and how to pursue community solar. As this report shows, there is no 'silver bullet' in terms of municipal utility community solar design or implementation - programs vary significantly and are highly dependent on localized contexts.

Computational approaches to metabolic engineering utilizing systems biology and synthetic biology.

PubMed

Fong, Stephen S

2014-08-01

Metabolic engineering modifies cellular function to address various biochemical applications. Underlying metabolic engineering efforts are a host of tools and knowledge that are integrated to enable successful outcomes. Concurrent development of computational and experimental tools has enabled different approaches to metabolic engineering. One approach is to leverage knowledge and computational tools to prospectively predict designs to achieve the desired outcome. An alternative approach is to utilize combinatorial experimental tools to empirically explore the range of cellular function and to screen for desired traits. This mini-review focuses on computational systems biology and synthetic biology tools that can be used in combination for prospective in silico strain design.

A Dynamic Resilience Approach for WDM Optical Networks

NASA Astrophysics Data System (ADS)

Garg, Amit Kumar

2017-12-01

Optical fibres have been developed as a transmission medium to carry traffic in order to provide various services in telecommunications platform. Failure of this fibre caused loss of data which can interrupt communication services. This paper has been focused only on survivable schemes in order to guarantee both protection and restoration in WDM optical networks. In this paper, a dynamic resilience approach has been proposed whose objective is to route the flows in a way which minimizes the total amount of bandwidth used for working and protection paths. In the proposed approach, path-based protection is utilized because it yields lower overhead and is also suitable for global optimization where, in case of a single link failure, all the flows utilizing the failed link are re-routed to a pre-computed set of paths. The simulation results demonstrate that proposed approach is much more efficient as it provides better quality of services (QoS) in terms of network resource utilization, blocking probability etc. as compared to conventional protection and restoration schemes. The proposed approach seems to offer an attractive combination of features, with both ring like speed and mesh-like efficiency.

Better utilization of low-grade woods

Treesearch

Peter Koch

1957-01-01

The objective of this paper is threefold: to outline briefly some of the avenues of approach so far employed in utilizing low-grade wood, to comment on the economic aspects of the problem, and finally, to speculate about what developments the future might bring to the field of utilization.

The New Tropospheric Product of the International GNSS Service

NASA Technical Reports Server (NTRS)

Byun, Sung H.; Bar-Sever, Yoaz E.; Gendt, Gerd

2005-01-01

We compare this new approach for generating the IGS tropospheric products with the previous approach, which was based on explicit combination of total zenith delay contributions from the IGS ACs. The new approach enables the IGS to rapidly generate highly accurate and highly reliable total zenith delay time series for many hundreds of sites, thus increasing the utility of the products to weather modelers, climatologists, and GPS analysts. In this paper we describe this new method, and discuss issues of accuracy, quality control, utility of the new products and assess its benefits.

Effect of Advanced Imaging Technology on How Biopsies Are Done and Who Does Them1

PubMed Central

Bhargavan, Mythreyi; Kerlan, Robert K.; Sunshine, Jonathan H.

2010-01-01

Purpose: To assess national levels and trends in utilization of biopsy procedures during the past decade and investigate the relative roles of biopsy approaches (open, endoscopic, and percutaneous) and physician specialties. Materials and Methods: Institutional review board approval was not necessary because only public domain data were used. Aggregated Medicare claims data were used to determine utilization of biopsies performed in 10 anatomic regions from 1997 to 2008. Utilization levels according to biopsy approach and anatomic region were calculated. Trends in the relative utilization of percutaneous needle biopsy (PNB) and imaging-guided percutaneous biopsy (IGPB) were assessed. The relative roles of radiologists and nonradiologists in the performance of all biopsies, PNBs, and IGPBs were evaluated. Results: Biopsy procedures with all approaches increased from 1380 to 1945 biopsies per 100 000 Medicare enrollees between 1997 and 2008, which represents a compound annual growth rate (CAGR) of 3%. Utilization of non-PNBs fell, while the absolute level and relative share of PNBs increased. In 2008, 67% of all biopsies were performed by using a percutaneous route. IGPB as a percentage of all PNBs increased over time in the regions for which data were available. Radiology was the leading specialty providing biopsy services. The total number of biopsies performed by radiologists increased at a CAGR of 8%, and radiologists’ share of all biopsies increased from 35% to 56%. Conclusion: During the past decade, there was continuing substitution away from invasive approaches and non–imaging-guided percutaneous approaches in favor of PNBs and IGPBs, likely related to increasing use of advanced imaging modalities for biopsy guidance. Consequently, radiologists are performing an increasing share of biopsies across all anatomic regions. © RSNA, 2010 Supplemental material:http://radiology.rsna.org/lookup/suppl/doi:10.1148/radiol.10092130/-/DC1 PMID:20587643

Fast implementation for compressive recovery of highly accelerated cardiac cine MRI using the balanced sparse model.

PubMed

Ting, Samuel T; Ahmad, Rizwan; Jin, Ning; Craft, Jason; Serafim da Silveira, Juliana; Xue, Hui; Simonetti, Orlando P

2017-04-01

Sparsity-promoting regularizers can enable stable recovery of highly undersampled magnetic resonance imaging (MRI), promising to improve the clinical utility of challenging applications. However, lengthy computation time limits the clinical use of these methods, especially for dynamic MRI with its large corpus of spatiotemporal data. Here, we present a holistic framework that utilizes the balanced sparse model for compressive sensing and parallel computing to reduce the computation time of cardiac MRI recovery methods. We propose a fast, iterative soft-thresholding method to solve the resulting ℓ1-regularized least squares problem. In addition, our approach utilizes a parallel computing environment that is fully integrated with the MRI acquisition software. The methodology is applied to two formulations of the multichannel MRI problem: image-based recovery and k-space-based recovery. Using measured MRI data, we show that, for a 224 × 144 image series with 48 frames, the proposed k-space-based approach achieves a mean reconstruction time of 2.35 min, a 24-fold improvement compared a reconstruction time of 55.5 min for the nonlinear conjugate gradient method, and the proposed image-based approach achieves a mean reconstruction time of 13.8 s. Our approach can be utilized to achieve fast reconstruction of large MRI datasets, thereby increasing the clinical utility of reconstruction techniques based on compressed sensing. Magn Reson Med 77:1505-1515, 2017. © 2016 International Society for Magnetic Resonance in Medicine. © 2016 International Society for Magnetic Resonance in Medicine.

Business Models and Regulation | Distributed Generation Interconnection

Science.gov Websites

@nrel.gov 303-384-4641 Utilities and regulators are responding to the growth of distributed generation with new business models and approaches. The growing role of distributed resources in the electricity Electric Cooperative, Groton Utilities Distributed Solar for Small Utilities A recording of the webinar is

Utilization Management in the Blood Transfusion Service

PubMed Central

Peña, Jeremy Ryan Andrew; Dzik, Walter “Sunny”

2015-01-01

The scope of activity of the Blood Transfusion Service (BTS) makes it unique among the clinical laboratories. The combination of therapeutic and diagnostic roles necessitates a multi-faceted approach to utilization management in the BTS. We present our experience in utilization management in large academic medical center. PMID:24080431

The Effects of Variability and Risk in Selection Utility Analysis: An Empirical Comparison.

ERIC Educational Resources Information Center

Rich, Joseph R.; Boudreau, John W.

1987-01-01

Investigated utility estimate variability for the selection utility of using the Programmer Aptitude Test to select computer programmers. Comparison of Monte Carlo results to other risk assessment approaches (sensitivity analysis, break-even analysis, algebraic derivation of the distribtion) suggests that distribution information provided by Monte…

When the 'soft-path' gets hard: demand management and financial instability for water utilities

NASA Astrophysics Data System (ADS)

Zeff, H. B.; Characklis, G. W.

2014-12-01

In the past, cost benefit analysis (CBA) has been viewed as an effective means of evaluating water utility strategies, particularly those that were dependent on the construction of new supply infrastructure. As water utilities have begun to embrace 'soft-path' approaches as a way to reduce the need for supply-centric development, CBA fails to recognize some important financial incentives affected by reduced water consumption. Demand management, both as a short-term response to drought and in longer-term actions to accommodate demand growth, can introduce revenue risks that adversely affect a utility's ability to repay debt, re-invest in aging infrastructure, or maintain reserve funds for use in a short-term emergency. A utility that does not generate sufficient revenue to support these functions may be subject to credit rating downgrades, which in turn affect the interest rate it pays on its debt. Interest rates are a critical consideration for utility managers in the capital-intensive water sector, where debt payments for infrastructure often account for a large portion of a utility's overall costs. Even a small increase in interest rates can add millions of dollars to the cost of new infrastructure. Recent studies have demonstrated that demand management techniques can lead to significant revenue variability, and credit rating agencies have begun to take notice of drought response plans when evaluating water utility credit ratings, providing utilities with a disincentive to fully embrace soft-path approaches. This analysis examines the impact of demand management schemes on key credit rating metrics for a water utility in Raleigh, North Carolina. The utility's consumer base is currently experiencing rapid population growth, and demand management has the potential to reduce the dependence on costly new supply infrastructure but could lead to financial instability that will significantly increase the costs of financing future projects. This work analyzes how 'soft-path' approaches might be more efficiently integrated with investment in supply-side infrastructure and suggests how financial hedging tools could be used to improve long-term utility planning objectives.

Anonymizing 1:M microdata with high utility

PubMed Central

Gong, Qiyuan; Luo, Junzhou; Yang, Ming; Ni, Weiwei; Li, Xiao-Bai

2016-01-01

Preserving privacy and utility during data publishing and data mining is essential for individuals, data providers and researchers. However, studies in this area typically assume that one individual has only one record in a dataset, which is unrealistic in many applications. Having multiple records for an individual leads to new privacy leakages. We call such a dataset a 1:M dataset. In this paper, we propose a novel privacy model called (k, l)-diversity that addresses disclosure risks in 1:M data publishing. Based on this model, we develop an efficient algorithm named 1:M-Generalization to preserve privacy and data utility, and compare it with alternative approaches. Extensive experiments on real-world data show that our approach outperforms the state-of-the-art technique, in terms of data utility and computational cost. PMID:28603388

Assessment of US industry's technology trends and new technology requirements

NASA Technical Reports Server (NTRS)

1984-01-01

The utility and effectiveness of a novel approach (the Applications Development, or AD approach), intended to augment the efficiency of NASA's technology utilization (TU) through dissemination of NASA technologies and joint technology development efforts with U.S. industry is tested. The innovative AD approach consists of the following key elements: selection of NASA technologies appearing to have leading edge attributes; interaction with NASA researchers to assess the characteristics and quality of each selected technology; identification of industry's needs in the selected technology areas; structuring the selected technologies in terms of specifications and standards familiar to industry (industrial Spec. Sheets); identification and assessment of industry's interest in the specific selected NASA technologies, utilizing the greatly facilitated communication made possible by the availability of the industrial Spec. Sheets; and matching selected NASA technologies with the needs of selected industries.

Estimating the relative utility of screening mammography.

PubMed

Abbey, Craig K; Eckstein, Miguel P; Boone, John M

2013-05-01

The concept of diagnostic utility is a fundamental component of signal detection theory, going back to some of its earliest works. Attaching utility values to the various possible outcomes of a diagnostic test should, in principle, lead to meaningful approaches to evaluating and comparing such systems. However, in many areas of medical imaging, utility is not used because it is presumed to be unknown. In this work, we estimate relative utility (the utility benefit of a detection relative to that of a correct rejection) for screening mammography using its known relation to the slope of a receiver operating characteristic (ROC) curve at the optimal operating point. The approach assumes that the clinical operating point is optimal for the goal of maximizing expected utility and therefore the slope at this point implies a value of relative utility for the diagnostic task, for known disease prevalence. We examine utility estimation in the context of screening mammography using the Digital Mammographic Imaging Screening Trials (DMIST) data. We show how various conditions can influence the estimated relative utility, including characteristics of the rating scale, verification time, probability model, and scope of the ROC curve fit. Relative utility estimates range from 66 to 227. We argue for one particular set of conditions that results in a relative utility estimate of 162 (±14%). This is broadly consistent with values in screening mammography determined previously by other means. At the disease prevalence found in the DMIST study (0.59% at 365-day verification), optimal ROC slopes are near unity, suggesting that utility-based assessments of screening mammography will be similar to those found using Youden's index.

Utilization management in anatomic pathology.

PubMed

Lewandrowski, Kent; Black-Schaffer, Steven

2014-01-01

There is relatively little published literature concerning utilization management in anatomic pathology. Nonetheless there are many utilization management opportunities that currently exist and are well recognized. Some of these impact only the cost structure within the pathology department itself whereas others reduce charges for third party payers. Utilization management may result in medical legal liabilities for breaching the standard of care. For this reason it will be important for pathology professional societies to develop national utilization guidelines to assist individual practices in implementing a medically sound approach to utilization management. © 2013.

The Longue Duree: Indonesia’s Response to the Threat of Jihadist Terrorism 1998-2016

DTIC Science & Technology

2016-06-01

were utilized against both separatists and the laskars at the domestic levels with a more laissez faire approach toward the latter. Additionally...approach predominantly utilized to respond to the separatist movements, it took a laissez - faire approach—one of collaboration and appeasement—with...once reinforced by Jones pointing to major ideological rifts and disparate objectives held by the overarching leaderships of the organizations as

Basic Understandings of Nonfictional Writings Using the Newspaper as a Supplementary Aid: For Junior High School and Senior High School Grades.

ERIC Educational Resources Information Center

Tokars, Lester E.

This supplementary aid for the teaching of English by the use of the "Newspaper in the Classroom" utilizes an ungraded approach that may be utilized with students from grades 7 through 12. The emphasis in this guide is in the specific literature area of nonfictional writings. The goals of using this teaching approach are to: (1) stimulate the…

Evaluation of Cities in the Context of Energy Efficient Urban Planning Approach

NASA Astrophysics Data System (ADS)

Handan Yücel Yıldırım, H.; Burcu Gültekin, Arzuhan; Tanrıvermiş, Harun

2017-10-01

Due to the increase in energy need with urbanization as a result of industrialization and rapid population growth, preservation of natural resources has become impossible. As the energy generated particularly from non-renewable natural resources that are in danger of depletion such as coal, natural gas, petroleum is limited, and as environmental issues caused by energy resources increase, means of safe and continuous access to energy are searched in the world. Owing to the limited energy resources and energy dependence on foreign sources in the world, particularly in European Union countries, efforts of increasing the share of renewable energy sources in energy consumption increased in all industries, including urban planning as well. Concordantly, it is necessary to develop policies and approaches that enable utilization of domestic resources complying with the country’s conditions, and monitor developments in energy. Such policies and approaches, which must be implemented in urban planning as well, have great importance in terms of not deteriorating habitable environments of future generations while utilizing present-day energy resources, prevalence of utilization of renewable energy sources, and utilization of energy effectively. For that purpose, this paper puts forward a conceptual framework covering the principles, strategies, and methods on energy efficient urban planning approach, and discusses the energy efficient urban area examples within the scope of the suggested framework.

Mental energy: Assessing the motivation dimension.

PubMed

Barbuto, John E

2006-07-01

Content-based theories of motivation may best uti lize the meta-theory of work motivation. Process-based theories may benefit most from adopting Locke and Latham's goal-setting approaches and measures. Decision-making theories should utilize the measurement approach operationalized by Ilgen et al. Sustained effort theories should utilize similar approaches to those used in numerous studies of intrinsic motivation, but the measurement of which is typically observational or attitudinal. This paper explored the implications of the four approaches to studying motivation on the newly estab ished model of mental energy. The approach taken for examining motivation informs the measurement of mental energy. Specific recommendations for each approach were developed and provided. As a result of these efforts, it will now be possible to diagnose, measure, and experimentally test for changes in human motivation, which is one of the three major components of mental energy.

Effectiveness of health sector reforms in reducing disparities in utilization of skilled birth attendants in Tanzania.

PubMed

Kengia, James Tumaini; Igarashi, Isao; Kawabuchi, Koichi

2013-08-01

Improving maternal health is a Millennium Development Goal adopted at the 2000 Millennium Summit of the United Nations. As part of the improving maternal health in Tanzania, it has been recommended that skilled birth attendants be present at all births to help reduce the high maternal mortality ratio. However, utilization of these attendants varies across socio-economic groups. The government of Tanzania has repeatedly attempted to carry out health sector reforms (HSRs) to alleviate disparities in health service utilization. In particular, around 1999, HSRs were incorporated into two approaches, including Decentralization by Devolution and Sector Wide Approach. This study aims to clarify the unresolved questions with little published evidence on the effect of HSRs on reducing disparities in utilization of skilled birth attendants across socio-economic groups over time. We used four cross-sectional datasets from the Tanzania Demographic and Health Survey: 1992, 1996, 1999, and 2004/05. Subjects included 14,752 women of reproductive age (15-49 years) and data on the most recent birth in the 5 years before each survey. Logistic regression analysis was performed with the dependent variable of whether respondents utilized skilled birth attendants or not, and with the main independent variables of time and socio-economic group. Results showed that the disparity in utilization of skilled birth attendants was significantly decreased from 1999 to 2004/05. These findings suggest that the two strategies, Decentralization by Devolution and Sector Wide Approach, in the process of HSRs are effective in reducing the disparities in utilization of skilled birth attendants among socio-economic groups.

Current and evolving approaches for improving the oral permeability of BCS Class III or analogous molecules.

PubMed

Dave, Vivek S; Gupta, Deepak; Yu, Monica; Nguyen, Phuong; Varghese Gupta, Sheeba

2017-02-01

The Biopharmaceutics Classification System (BCS) classifies pharmaceutical compounds based on their aqueous solubility and intestinal permeability. The BCS Class III compounds are hydrophilic molecules (high aqueous solubility) with low permeability across the biological membranes. While these compounds are pharmacologically effective, poor absorption due to low permeability becomes the rate-limiting step in achieving adequate bioavailability. Several approaches have been explored and utilized for improving the permeability profiles of these compounds. The approaches include traditional methods such as prodrugs, permeation enhancers, ion-pairing, etc., as well as relatively modern approaches such as nanoencapsulation and nanosizing. The most recent approaches include a combination/hybridization of one or more traditional approaches to improve drug permeability. While some of these approaches have been extremely successful, i.e. drug products utilizing the approach have progressed through the USFDA approval for marketing; others require further investigation to be applicable. This article discusses the commonly studied approaches for improving the permeability of BCS Class III compounds.

Renewable energy in electric utility capacity planning: a decomposition approach with application to a Mexican utility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Staschus, K.

1985-01-01

In this dissertation, efficient algorithms for electric-utility capacity expansion planning with renewable energy are developed. The algorithms include a deterministic phase that quickly finds a near-optimal expansion plan using derating and a linearized approximation to the time-dependent availability of nondispatchable energy sources. A probabilistic second phase needs comparatively few computer-time consuming probabilistic simulation iterations to modify this solution towards the optimal expansion plan. For the deterministic first phase, two algorithms, based on a Lagrangian Dual decomposition and a Generalized Benders Decomposition, are developed. The probabilistic second phase uses a Generalized Benders Decomposition approach. Extensive computational tests of the algorithms aremore » reported. Among the deterministic algorithms, the one based on Lagrangian Duality proves fastest. The two-phase approach is shown to save up to 80% in computing time as compared to a purely probabilistic algorithm. The algorithms are applied to determine the optimal expansion plan for the Tijuana-Mexicali subsystem of the Mexican electric utility system. A strong recommendation to push conservation programs in the desert city of Mexicali results from this implementation.« less

Hardware implementation of CMAC neural network with reduced storage requirement.

PubMed

Ker, J S; Kuo, Y H; Wen, R C; Liu, B D

1997-01-01

The cerebellar model articulation controller (CMAC) neural network has the advantages of fast convergence speed and low computation complexity. However, it suffers from a low storage space utilization rate on weight memory. In this paper, we propose a direct weight address mapping approach, which can reduce the required weight memory size with a utilization rate near 100%. Based on such an address mapping approach, we developed a pipeline architecture to efficiently perform the addressing operations. The proposed direct weight address mapping approach also speeds up the computation for the generation of weight addresses. Besides, a CMAC hardware prototype used for color calibration has been implemented to confirm the proposed approach and architecture.

A neural network strategy for end-point optimization of batch processes.

PubMed

Krothapally, M; Palanki, S

1999-01-01

The traditional way of operating batch processes has been to utilize an open-loop "golden recipe". However, there can be substantial batch to batch variation in process conditions and this open-loop strategy can lead to non-optimal operation. In this paper, a new approach is presented for end-point optimization of batch processes by utilizing neural networks. This strategy involves the training of two neural networks; one to predict switching times and the other to predict the input profile in the singular region. This approach alleviates the computational problems associated with the classical Pontryagin's approach and the nonlinear programming approach. The efficacy of this scheme is illustrated via simulation of a fed-batch fermentation.

Utility-scale system preventive and failure-related maintenance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jennings, C.; Hutchinson, P.

1995-11-01

This paper describes the design and performance background on PVUSA utility-scale systems at Davis and Kerman, California, and reports on a preventative and failure-related maintenance approach and costs.

Interaction between active tectonics, erosion and diapirism, a case study from Habble-Rud in Southern Central Alborz (Northern Iran)

NASA Astrophysics Data System (ADS)

Jaberi, Maryam; Ghassemi, Mohammad R.; Shayan, Siavosh; Yamani, Mojtaba; Zamanzadeh, Seyed Mohammad

2018-01-01

The Alborz mountain chain is a region of active deformation within the Arabia-Eurasia continental collision zone. The southern part of central Alborz Mountains, in the north of Iran, represents complex tectonics because it is located at the border of two developing continental sedimentary basins between southern central Alborz and Central Iran. An arid and semi-arid climate, a large extent of Quaternary sediments, rugged topography, salt domes and faults with historical seismicity influence the Habble-Rud River catchment. In the present research, a number of tectonic geomorphologic indices were extracted from satellite imagery and 10 m DEM (digital elevation model) data in order to identify relative tectonic activity within the basin. The indices include: stream length-gradient index (Sl), drainage basin asymmetry (Af), index of mountain front sinuosity (Smf), hypsometric integral (Hi), index of drainage basin shape (Bs), ratio of valley-floor width to valley height (Vf), and fault density (Fd). Due to the presence of heterogeneous indices for all sections of the catchment causing large extension of Habble-Rud (3260 km2), all of the variables such as extremely erodible formations, faults and folds and salt tectonics on the Southern part; were put into a matrix table. As a new approach, the variables were put into the SAW (simple additive model) model as one of MADM (multi-attribute decision-making models) techniques. The study area was divided into four regions according to the values of SAW. These classes include very high (%11), high (48.3%), moderate (34.7%), and low activity (3.4%). The result of the model suggests that the study area is located on a changing tectonic trend in central Alborz from NW-SE to NE-SW. The regions with high relative tectonic activity in HR catchment correspond to the active Garmsar and Sorkhe-Kalout faults and diapirs.

Advanced 3D Geological Modelling Using Multi Geophysical Data in the Yamagawa Geothermal Field, Japan

NASA Astrophysics Data System (ADS)

Mochinaga, H.; Aoki, N.; Mouri, T.

2017-12-01

We propose a robust workflow of 3D geological modelling based on integrated analysis while honouring seismic, gravity, and wellbore data for exploration and development at flash steam geothermal power plants. We design the workflow using temperature logs at less than 10 well locations for practical use at an early stage of geothermal exploration and development. In the workflow, geostatistical technique, multi-attribute analysis, and artificial neural network are employed for the integration of multi geophysical data. The geological modelling is verified by using a 3D seismic data which was acquired in the Yamagawa Demonstration Area (approximately 36 km2), located at the city of Ibusuki in Kagoshima, Japan in 2015. Temperature-depth profiles are typically characterized by heat transfer of conduction, outflow, and up-flow which have low frequency trends. On the other hand, feed and injection zones with high permeability would cause high frequency perturbation on temperature-depth profiles. Each trend is supposed to be caused by different geological properties and subsurface structures. In this study, we estimate high frequency (> 2 cycles/km) and low frequency (< 1 cycle/km) models separately by means of different types of attribute volumes. These attributes are mathematically generated from P-impedance and density volumes derived from seismic inversion, an ant-tracking seismic volume, and a geostatistical temperature model prior to application of artificial neural network on the geothermal modelling. As a result, the band-limited stepwise approach predicts a more precise geothermal model than that of full-band temperature profiles at a time. Besides, lithofacies interpretation confirms reliability of the predicted geothermal model. The integrated interpretation is significantly consistent with geological reports from previous studies. Isotherm geobodies illustrate specific features of geothermal reservoir and cap rock, shallow aquifer, and its hydrothermal circulation in 3D visualization. The advanced workflow of 3D geological modelling is suitable for optimization of well locations for production and reinjection in geothermal fields.

Re-powering and site recycling in a competitive environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, A.; Kahn, E.P.

1991-03-01

Re-powering and site recycling are strategies designed to expand electric generating capacity by using depreciated assets. The resource base for the these strategies is large. By 1995, over 170,000 MW of fossil-fired capacity will be in excess of thirty years old, and approaching the end of its conventional economic lifetime. This paper explores how these assets might be developed using competitive market forces. While some re-powering is being pursued under traditional ratebase regulation, there are four other generic alternatives. These are: (1) utility investment at fixed prices with regulatory pre-approval, (2) utility investment under competitive bidding, (3) utility leasing formore » private producer development, and (4) utility sale of sites for private producer development. Issues associated with each alternative are explored and illustrated with examples. State regulatory policy will be the critical determinant of whether a market develops for depreciated power plants. Financial incentives will stimulate utilities to re-deploy depreciated assets. This means some form of profit-sharing between customers and shareholders of the grains from asset sales. Different approaches to profit sharing are reviewed. These developments are still in an experimental state, however, and no single approach appears to have emerged as a dominant trend. 36 refs., 1 tab.« less

Utility as a rationale for choosing observer performance assessment paradigms for detection tasks in medical imaging.

PubMed

Wunderlich, Adam; Abbey, Craig K

2013-11-01

Studies of lesion detectability are often carried out to evaluate medical imaging technology. For such studies, several approaches have been proposed to measure observer performance, such as the receiver operating characteristic (ROC), the localization ROC (LROC), the free-response ROC (FROC), the alternative free-response ROC (AFROC), and the exponentially transformed FROC (EFROC) paradigms. Therefore, an experimenter seeking to carry out such a study is confronted with an array of choices. Traditionally, arguments for different approaches have been made on the basis of practical considerations (statistical power, etc.) or the gross level of analysis (case-level or lesion-level). This article contends that a careful consideration of utility should form the rationale for matching the assessment paradigm to the clinical task of interest. In utility theory, task performance is commonly evaluated with total expected utility, which integrates the various event utilities against the probability of each event. To formalize the relationship between expected utility and the summary curve associated with each assessment paradigm, the concept of a "natural" utility structure is proposed. A natural utility structure is defined for a summary curve when the variables associated with the summary curve axes are sufficient for computing total expected utility, assuming that the disease prevalence is known. Natural utility structures for ROC, LROC, FROC, AFROC, and EFROC curves are introduced, clarifying how the utilities of correct and incorrect decisions are aggregated by summary curves. Further, conditions are given under which general utility structures for localization-based methodologies reduce to case-based assessment. Overall, the findings reveal how summary curves correspond to natural utility structures of diagnostic tasks, suggesting utility as a motivating principle for choosing an assessment paradigm.

Context Matters: Real-World and Utilization-Focused Evaluation Strategies to Support Change and Improvement in Child Welfare

ERIC Educational Resources Information Center

Ward, Kristin J.; Maher, Erin J.; Marcynyszyn, Lyscha A.; Ellis, Mei Ling K.; Pecora, Peter J.

2011-01-01

This article examines the importance of context in evaluative inquiry. Following guidelines from real-world and utilization-focused evaluation frameworks, four projects are described to illustrate one foundation's pragmatic approach to evaluation that values collaboration, methodological appropriateness, and utilization. The authors contend that…

An Economic Approach to Setting Contribution Limits in Qualified State-Sponsored Tuition Savings Plans.

ERIC Educational Resources Information Center

Ma, Jennifer; Warshawsky, Mark J.; Ameriks, John; Blohm, Julia A.

This study used an expected utility framework with a mean-lower partial moment specification for investor utility to determine the asset allocation and the allowable contribution limits for qualified state-sponsored tuition savings plans. Given the assumptions about state policymakers' perceptions of investor utility, the study determined the…

Utilizing a Trauma Systems Approach to Benchmark and Improve Combat Casualty Care

DTIC Science & Technology

2010-07-01

modern battlefield utilizing evidence - based medicine . The development of injury care benchmarks enhanced the evolution of the combat casualty care performance improvement process within the trauma system.

An Exploration of the Differing Perceptions of Problem-Based Learning (PBL) from Students and Facilitators of Diverse Cultural Backgrounds, in the Fields of Theological and Nursing Education

ERIC Educational Resources Information Center

Fung, Nancy L. Y.

2013-01-01

Theological education has not widely utilized the PBL approach and there is very little research examining the utility of PBL in theological education. Lectures are currently the preferred teaching method in theological education, however, it is recognized that there is a need for a more holistic approach. As theological education is used in both…

A new approach to global control of redundant manipulators

NASA Technical Reports Server (NTRS)

Seraji, Homayoun

1989-01-01

A new and simple approach to configuration control of redundant manipulators is presented. In this approach, the redundancy is utilized to control the manipulator configuration directly in task space, where the task will be performed. A number of kinematic functions are defined to reflect the desirable configuration that will be achieved for a given end-effector position. The user-defined kinematic functions and the end-effector Cartesian coordinates are combined to form a set of task-related configuration variables as generalized coordinates for the manipulator. An adaptive scheme is then utilized to globally control the configuration variables so as to achieve tracking of some desired reference trajectories. This accomplishes the basic task of desired end-effector motion, while utilizing the redundancy to achieve any additional task through the desired time variation of the kinematic functions. The control law is simple and computationally very fast, and does not require the complex manipulator dynamic model.

Culturally Tailored Depression/Suicide Prevention in Latino Youth: Community Perspectives.

PubMed

Ford-Paz, Rebecca E; Reinhard, Christine; Kuebbeler, Andrea; Contreras, Richard; Sánchez, Bernadette

2015-10-01

Latino adolescents are at elevated risk for depression and suicide compared to other ethnic groups. Project goals were to gain insight from community leaders about depression risk factors particular to Latino adolescents and generate innovative suggestions to improve cultural relevance of prevention interventions. This project utilized a CBPR approach to enhance cultural relevance, acceptability, and utility of the findings and subsequent program development. Two focus groups of youth and youth-involved Latino community leaders (n = 18) yielded three overarching themes crucial to a culturally tailored depression prevention intervention: (1) utilize a multipronged and sustainable intervention approach, (2) raise awareness about depression in culturally meaningful ways, and (3) promote Latino youth's social connection and cultural enrichment activities. Findings suggest that both adaptation of existing prevention programs and development of hybrid approaches may be necessary to reduce depression/suicide disparities for Latino youth. One such hybrid program informed by community stakeholders is described.

An Integrated Approach to Exploration Launch Office Requirements Development

NASA Technical Reports Server (NTRS)

Holladay, Jon B.; Langford, Gary

2006-01-01

The proposed paper will focus on the Project Management and Systems Engineering approach utilized to develop a set of both integrated and cohesive requirements for the Exploration Launch Office, within the Constellation Program. A summary of the programmatic drivers which influenced the approach along with details of the resulting implementation will be discussed as well as metrics evaluating the efficiency and accuracy of the various requirements development activities. Requirements development activities will focus on the procedures utilized to ensure that technical content was valid and mature in preparation for the Crew Launch Vehicle and Constellation System s Requirements Reviews. This discussion will begin at initial requirements development during the Exploration Systems Architecture Study and progress through formal development of the program structure. Specific emphasis will be given to development and validation of the requirements. This discussion will focus on approaches to garner the appropriate requirement owners (or customers), project infrastructure utilized to emphasize proper integration, and finally the procedure to technically mature, verify and validate the requirements. Examples of requirements being implemented on the Launch Vehicle (systems, interfaces, test & verification) will be utilized to demonstrate the various processes and also provide a top level understanding of the launch vehicle(s) performance goals. Details may also be provided on the approaches for verification, which range from typical aerospace hardware development (qualification/acceptance) through flight certification (flight test, etc.). The primary intent of this paper is to provide a demonstrated procedure for the development of a mature, effective, integrated set of requirements on a complex system, which also has the added intricacies of both heritage and new hardware development integration. Ancillary focus of the paper will include discussion of Test and Verification approaches along with top level systems/elements performance capabilities.

Examining Stakeholder Perceptions of Accessibility and Utilization of Computer and Internet Technology in the Selinsgrove Area School District

ERIC Educational Resources Information Center

Krause, Lorinda M.

2014-01-01

This study utilized a mixed methods approach to examine the issue of how parents, students, and teachers (stakeholders) perceive accessibility and the utilization of computer and Internet technology within the Selinsgrove, Pennsylvania Area School District. Quantitative data was collected through the use of questionnaires distributed to the…

An Investigation of Data Privacy and Utility Using Machine Learning as a Gauge

ERIC Educational Resources Information Center

Mivule, Kato

2014-01-01

The purpose of this investigation is to study and pursue a user-defined approach in preserving data privacy while maintaining an acceptable level of data utility using machine learning classification techniques as a gauge in the generation of synthetic data sets. This dissertation will deal with data privacy, data utility, machine learning…

Adding concentrated solar power plants to wind farms to achieve a good utility electrical load match

USDA-ARS?s Scientific Manuscript database

Texas has the greatest installed wind turbine capacity of any state in the United States, the percentage of wind capacity approaches 10% of the utilities capacity (in 2010 the total wind generated capacity in Texas was 8%). It is becomimg increasingly difficult for the utility to balance the elec...

The derivation of scenic utility functions and surfaces and their role in landscape management

Treesearch

John W. Hamilton; Gregory J. Buhyoff; J. Douglas Wellman

1979-01-01

This paper outlines a methodological approach for determining relevant physical landscape features which people use in formulating judgments about scenic utility. This information, coupled with either empirically derived or rationally stipulated regression techniques, may be used to produce scenic utility functions and surfaces. These functions can provide a means for...

Design, Development and Utilization Perspectives on Database Management Systems

ERIC Educational Resources Information Center

Shneiderman, Ben

1977-01-01

This paper reviews the historical development of integrated data base management systems and examines competing approaches. Topics include management and utilization, implementation and design, query languages, security, integrity, privacy and concurrency. (Author/KP)

Microwave Quantitative NDE Technique for Dielectric Slab Thickness Estimation Using the Music Algorithm

NASA Astrophysics Data System (ADS)

Abou-Khousa, M. A.; Zoughi, R.

2007-03-01

Non-invasive monitoring of dielectric slab thickness is of great interest in various industrial applications. This paper focuses on estimating the thickness of dielectric slabs, and consequently monitoring their variations, utilizing wideband microwave signals and the MUtiple SIgnal Characterization (MUSIC) algorithm. The performance of the proposed approach is assessed by validating simulation results with laboratory experiments. The results clearly indicate the utility of this overall approach for accurate dielectric slab thickness evaluation.

Outcomes Assessment of Treating Completely Edentulous Patients with a Fixed Implant-Supported Profile Prosthesis Utilizing a Graftless Approach. Part 1: Clinically Related Outcomes.

PubMed

Alzoubi, Fawaz; Bedrossian, Edmond; Wong, Allen; Farrell, Douglas; Park, Chan; Indresano, Thomas

To assess outcomes of treating completely edentulous patients with a fixed implant-supported profile prosthesis utilizing a graftless approach for the maxilla and for the mandible, with emphasis on clinically related outcomes, specifically implant and prosthesis survival. This was a retrospective study with the following inclusion criteria: completely edentulous patients rehabilitated with a fixed implant-supported profile denture utilizing a graftless approach. Patients fulfilling the inclusion criteria were asked to participate in the study during their follow-up visits, and hence a consecutive sampling strategy was used. Data regarding implant and prosthesis cumulative survival rates (CSRs) were gathered and calculated. Thirty-four patients were identified with a total of 220 implants placed. An overall CSR of 98.2% was recorded with an observation of up to 10 years. For tilted, axial, and zygomatic implants, CSRs of 96.9%, 98.0%, and 100%, respectively, were observed for up to 10 years. For provisional prostheses, CSRs of 92.3% at 1 year, and 84.6% at 2 years were observed. For final prostheses, a CSR of 93.8% was observed at 10 years. The results suggest that treating completely edentulous patients with a fixed profile prosthesis utilizing a graftless approach in the maxilla and the mandible can be a reliable treatment option.

A Novel Approach to Improving Utilization of Laboratory Testing.

PubMed

Zhou, Yaolin; Procop, Gary W; Riley, Jacquelyn D

2018-02-01

- The incorporation of best practice guidelines into one's institution is a challenging goal of utilization management, and the successful adoption of such guidelines depends on institutional context. Laboratorians who have access to key clinical data are well positioned to understand existing local practices and promote more appropriate laboratory testing. - To apply a novel approach to utilization management by reviewing international clinical guidelines and current institutional practices to create a reliable mechanism to improve detection and reduce unnecessary tests in our patient population. - We targeted a frequently ordered genetic test for HFE-related hereditary hemochromatosis, a disorder of low penetrance. After reviewing international practice guidelines, we evaluated 918 HFE tests and found that all patients with new diagnoses had transferrin saturation levels that were significantly higher than those of patients with nonrisk genotypes (72% versus 42%; P < .001). - Our "one-button" order that restricts HFE genetic tests to patients with transferrin saturation greater than 45% is consistent with published practice guidelines and detected 100% of new patients with HFE-related hereditary hemochromatosis. - Our proposed algorithm differs from previously published approaches in that it incorporates both clinical practice guidelines and local physician practices, yet requires no additional hands-on effort from pathologists or clinicians. This novel approach to utilization management embraces the role of pathologists as leaders in promoting high-quality patient care in local health care systems.

The Utility of the Pattern of the Strengths and Weaknesses Approach

ERIC Educational Resources Information Center

Fiorello, Catherine A.; Flanagan, Dawn P.; Hale, James B.

2014-01-01

Unlike ability-achievement discrepancy and response-to-intervention approaches, the processing strengths and weaknesses (PSW) approach is the only empirically based approach that attempts to identify the pattern of deficit in the basic psychological processes that interferes with academic achievement for children with specific learning…

14 CFR 23.73 - Reference landing approach speed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Reference landing approach speed. 23.73... Reference landing approach speed. (a) For normal, utility, and acrobatic category reciprocating engine-powered airplanes of 6,000 pounds or less maximum weight, the reference landing approach speed, VREF, must...

14 CFR 23.73 - Reference landing approach speed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Reference landing approach speed. 23.73... Reference landing approach speed. (a) For normal, utility, and acrobatic category reciprocating engine-powered airplanes of 6,000 pounds or less maximum weight, the reference landing approach speed, VREF, must...

Volatile Extractor (PVEx) for Planetary In Situ Resource Utilization

NASA Astrophysics Data System (ADS)

Zacny, K.; Morrison, P.; Vendiola, V.; Paz, A.

2017-02-01

Here we present a trade study and final approach for efficient extraction of volatiles from planetary regolith for the purpose of In Situ Resource Utilization. The project is SBIR funded and hardware is being fabricated.

Expected Power-Utility Maximization Under Incomplete Information and with Cox-Process Observations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fujimoto, Kazufumi, E-mail: m_fuji@kvj.biglobe.ne.jp; Nagai, Hideo, E-mail: nagai@sigmath.es.osaka-u.ac.jp; Runggaldier, Wolfgang J., E-mail: runggal@math.unipd.it

2013-02-15

We consider the problem of maximization of expected terminal power utility (risk sensitive criterion). The underlying market model is a regime-switching diffusion model where the regime is determined by an unobservable factor process forming a finite state Markov process. The main novelty is due to the fact that prices are observed and the portfolio is rebalanced only at random times corresponding to a Cox process where the intensity is driven by the unobserved Markovian factor process as well. This leads to a more realistic modeling for many practical situations, like in markets with liquidity restrictions; on the other hand itmore » considerably complicates the problem to the point that traditional methodologies cannot be directly applied. The approach presented here is specific to the power-utility. For log-utilities a different approach is presented in Fujimoto et al. (Preprint, 2012).« less

Robotic right middle lobectomy with a subxiphoid utility port.

PubMed

Jayakumar, Shruti; Nardini, Marco; Papoulidis, Pavlos; Dunning, Joel

2018-06-01

We present the case of a 74-year-old man with Stage IIa pulmonary adenocarcinoma, for which he underwent a robotic right middle lobectomy. A 4-armed, 5-port approach was used. Four intercostal ports were created above the ninth rib using the Cerfolio's technique. The subxiphoid port was created in the midline, 5 cm down from the xiphisternum. The robot offers higher image quality, depth perception and improved articulation of the instruments, allowing for more accurate dissection and stitching. The usage of a subxiphoid utility port reduces the clashing between instruments, offers a good angle for stapling and provides a direct view of the instruments entering into the chest. Specimen removal through the subxiphoid port may reduce postoperative pain and enhance patient recovery. The use of the subxiphoid approach as a utility port for robotic surgery is promising and may be a suitable replacement for the traditional utility port.

Advances in Proteomics Data Analysis and Display Using an Accurate Mass and Time Tag Approach

PubMed Central

Zimmer, Jennifer S.D.; Monroe, Matthew E.; Qian, Wei-Jun; Smith, Richard D.

2007-01-01

Proteomics has recently demonstrated utility in understanding cellular processes on the molecular level as a component of systems biology approaches and for identifying potential biomarkers of various disease states. The large amount of data generated by utilizing high efficiency (e.g., chromatographic) separations coupled to high mass accuracy mass spectrometry for high-throughput proteomics analyses presents challenges related to data processing, analysis, and display. This review focuses on recent advances in nanoLC-FTICR-MS-based proteomics approaches and the accompanying data processing tools that have been developed to display and interpret the large volumes of data being produced. PMID:16429408

Using Derivative Contracts to Mitigate Water Utility Financial Risks

NASA Astrophysics Data System (ADS)

Characklis, G. W.; Zeff, H.

2012-12-01

As developing new supply capacity has become increasingly expensive and difficult to permit, utilities have become more reliant on temporary demand management programs, such as outdoor water use restrictions, for ensuring reliability during drought. However, a significant fraction of water utility income is often derived from the volumetric sale of water, and such restrictions can lead to substantial revenue losses. Given that many utilities set prices at levels commensurate with recovering costs, these revenue losses can leave them financially vulnerable to budgetary shortfalls during drought. This work explores approaches for mitigating drought-related revenue losses through the use of third-party financial insurance contracts based on weather derivatives. Two different types of contracts are developed, and their efficacy is compared against two more traditional forms of financial hedging used by water utilities: drought surcharges and contingency funds (i.e. self insurance). Strategies involving each of these approaches, as well as their use in combination, are applied under conditions facing the water utility serving Durham, North Carolina. A multi-reservoir model provides information on the scale and timing of droughts, with the financial effects of these events simulated using detailed data derived from utility billing records. Results suggest that third-party derivative contracts, either independently or in combination with more traditional hedging tools (i.e. surcharges, contingency funds), can provide an effective means of reducing a utility's financial vulnerability to drought.

Managing water utility financial risks through third-party index insurance contracts

NASA Astrophysics Data System (ADS)

Zeff, Harrison B.; Characklis, Gregory W.

2013-08-01

As developing new supply capacity has become increasingly expensive and difficult to permit (i.e., regulatory approval), utilities have become more reliant on temporary demand management programs, such as outdoor water use restrictions, for ensuring reliability during drought. However, a significant fraction of water utility income is often derived from the volumetric sale of water, and such restrictions can lead to substantial revenue losses. Given that many utilities set prices at levels commensurate with recovering costs, these revenue losses can leave them financially vulnerable to budgetary shortfalls. This work explores approaches for mitigating drought-related revenue losses through the use of third-party financial insurance contracts based on streamflow indices. Two different types of contracts are developed, and their efficacy is compared against two more traditional forms of financial hedging used by water utilities: Drought surcharges and contingency funds (i.e., self-insurance). Strategies involving each of these approaches, as well as their use in combination, are applied under conditions facing the water utility serving Durham, North Carolina. A multireservoir model provides information on the scale and timing of droughts, and the financial effects of these events are simulated using detailed data derived from utility billing records. Results suggest that third-party index insurance contracts, either independently or in combination with more traditional hedging tools, can provide an effective means of reducing a utility's financial vulnerability to drought.

Statistical Tools And Artificial Intelligence Approaches To Predict Fracture In Bulk Forming Processes

NASA Astrophysics Data System (ADS)

Di Lorenzo, R.; Ingarao, G.; Fonti, V.

2007-05-01

The crucial task in the prevention of ductile fracture is the availability of a tool for the prediction of such defect occurrence. The technical literature presents a wide investigation on this topic and many contributions have been given by many authors following different approaches. The main class of approaches regards the development of fracture criteria: generally, such criteria are expressed by determining a critical value of a damage function which depends on stress and strain paths: ductile fracture is assumed to occur when such critical value is reached during the analysed process. There is a relevant drawback related to the utilization of ductile fracture criteria; in fact each criterion usually has good performances in the prediction of fracture for particular stress - strain paths, i.e. it works very well for certain processes but may provide no good results for other processes. On the other hand, the approaches based on damage mechanics formulation are very effective from a theoretical point of view but they are very complex and their proper calibration is quite difficult. In this paper, two different approaches are investigated to predict fracture occurrence in cold forming operations. The final aim of the proposed method is the achievement of a tool which has a general reliability i.e. it is able to predict fracture for different forming processes. The proposed approach represents a step forward within a research project focused on the utilization of innovative predictive tools for ductile fracture. The paper presents a comparison between an artificial neural network design procedure and an approach based on statistical tools; both the approaches were aimed to predict fracture occurrence/absence basing on a set of stress and strain paths data. The proposed approach is based on the utilization of experimental data available, for a given material, on fracture occurrence in different processes. More in detail, the approach consists in the analysis of experimental tests in which fracture occurs followed by the numerical simulations of such processes in order to track the stress-strain paths in the workpiece region where fracture is expected. Such data are utilized to build up a proper data set which was utilized both to train an artificial neural network and to perform a statistical analysis aimed to predict fracture occurrence. The developed statistical tool is properly designed and optimized and is able to recognize the fracture occurrence. The reliability and predictive capability of the statistical method were compared with the ones obtained from an artificial neural network developed to predict fracture occurrence. Moreover, the approach is validated also in forming processes characterized by a complex fracture mechanics.

Providing Effective Access to Shared Resources: A COIN Approach

NASA Technical Reports Server (NTRS)

Airiau, Stephane; Wolpert, David H.

2004-01-01

Managers of systems of shared resources typically have many separate goals. Examples are efficient utilization of the resources among its users and ensuring no user s satisfaction in the system falls below a preset minimal level. Since such goals will usually conflict with one another, either implicitly or explicitly the manager must determine the relative importance of the goals, encapsulating that into an overall utility function rating the possible behaviors of the entire system. Here we demonstrate a distributed, robust, and adaptive way to optimize that overall function. Our approach is to interpose adaptive agents between each user and the system, where each such agent is working to maximize its own private utility function. In turn, each such agent's function should be both relatively easy for the agent to learn to optimize, and "aligned" with the overall utility function of the system manager - an overall function that is based on but in general different from the satisfaction functions of the individual users. To ensure this we enhance the Collective INtelligence (COIN) framework to incorporate user satisfaction functions in the overall utility function of the system manager and accordingly in the associated private utility functions assigned to the users agents. We present experimental evaluations of different COIN-based private utility functions and demonstrate that those COIN-based functions outperform some natural alternatives.

Providing Effective Access to Shared Resources: A COIN Approach

NASA Technical Reports Server (NTRS)

Airiau, Stephane; Wolpert, David H.; Sen, Sandip; Tumer, Kagan

2003-01-01

Managers of systems of shared resources typically have many separate goals. Examples are efficient utilization of the resources among its users and ensuring no user's satisfaction in the system falls below a preset minimal level. Since such goals will usually conflict with one another, either implicitly or explicitly the manager must determine the relative importance of the goals, encapsulating that into an overall utility function rating the possible behaviors of the entire system. Here we demonstrate a distributed, robust, and adaptive way to optimize that overall function. Our approach is to interpose adaptive agents between each user and the system, where each such agent is working to maximize its own private utility function. In turn, each such agent's function should be both relatively easy for the agent to learn to optimize, and 'aligned' with the overall utility function of the system manager - an overall function that is based on but in general different from the satisfaction functions of the individual users. To ensure this we enhance the COllective INtelligence (COIN) framework to incorporate user satisfaction functions in the overall utility function of the system manager and accordingly in the associated private utility functions assigned to the users agents. We present experimental evaluations of different COIN-based private utility functions and demonstrate that those COIN-based functions outperform some natural alternatives.

Developing objectives with multiple stakeholders: adaptive management of horseshoe crabs and Red Knots in the Delaware Bay

USGS Publications Warehouse

McGowan, Conor P.; Lyons, James E.; Smith, David

2015-01-01

Structured decision making (SDM) is an increasingly utilized approach and set of tools for addressing complex decisions in environmental management. SDM is a value-focused thinking approach that places paramount importance on first establishing clear management objectives that reflect core values of stakeholders. To be useful for management, objectives must be transparently stated in unambiguous and measurable terms. We used these concepts to develop consensus objectives for the multiple stakeholders of horseshoe crab harvest in Delaware Bay. Participating stakeholders first agreed on a qualitative statement of fundamental objectives, and then worked to convert those objectives to specific and measurable quantities, so that management decisions could be assessed. We used a constraint-based approach where the conservation objectives for Red Knots, a species of migratory shorebird that relies on horseshoe crab eggs as a food resource during migration, constrained the utility of crab harvest. Developing utility functions to effectively reflect the management objectives allowed us to incorporate stakeholder risk aversion even though different stakeholder groups were averse to different or competing risks. While measurable objectives and quantitative utility functions seem scientific, developing these objectives was fundamentally driven by the values of the participating stakeholders.

Fixation of CO2 and CO on a diverse range of carbohydrates using anaerobic, non-photosynthetic mixotrophy.

PubMed

Maru, Biniam T; Munasinghe, Pradeep C; Gilary, Hadar; Jones, Shawn W; Tracy, Bryan P

2018-04-01

Biological CO2 fixation is an important technology that can assist in combating climate change. Here, we show an approach called anaerobic, non-photosynthetic mixotrophy can result in net CO2 fixation when using a reduced feedstock. This approach uses microbes called acetogens that are capable of concurrent utilization of both organic and inorganic substrates. In this study, we investigated the substrate utilization of 17 different acetogens, both mesophilic and thermophilic, on a variety of different carbohydrates and gases. Compared to most model acetogen strains, several non-model mesophilic strains displayed greater substrate flexibility, including the ability to utilize disaccharides, glycerol and an oligosaccharide, and growth rates. Three of these non-model strains (Blautia producta, Clostridium scatologenes and Thermoanaerobacter kivui) were chosen for further characterization, under a variety of conditions including H2- or syngas-fed sugar fermentations and a CO2-fed glycerol fermentation. In all cases, CO2 was fixed and carbon yields approached 100%. Finally, the model acetogen C. ljungdahlii was engineered to utilize glucose, a non-preferred sugar, while maintaining mixotrophic behavior. This work demonstrates the flexibility and robustness of anaerobic, non-photosynthetic mixotrophy as a technology to help reduce CO2 emissions.

A New Approach for Resolving Conflicts in Actionable Behavioral Rules

PubMed Central

Zhu, Dan; Zeng, Daniel

2014-01-01

Knowledge is considered actionable if users can take direct actions based on such knowledge to their advantage. Among the most important and distinctive actionable knowledge are actionable behavioral rules that can directly and explicitly suggest specific actions to take to influence (restrain or encourage) the behavior in the users' best interest. However, in mining such rules, it often occurs that different rules may suggest the same actions with different expected utilities, which we call conflicting rules. To resolve the conflicts, a previous valid method was proposed. However, inconsistency of the measure for rule evaluating may hinder its performance. To overcome this problem, we develop a new method that utilizes rule ranking procedure as the basis for selecting the rule with the highest utility prediction accuracy. More specifically, we propose an integrative measure, which combines the measures of the support and antecedent length, to evaluate the utility prediction accuracies of conflicting rules. We also introduce a tunable weight parameter to allow the flexibility of integration. We conduct several experiments to test our proposed approach and evaluate the sensitivity of the weight parameter. Empirical results indicate that our approach outperforms those from previous research. PMID:25162054

Developing Objectives with Multiple Stakeholders: Adaptive Management of Horseshoe Crabs and Red Knots in the Delaware Bay

NASA Astrophysics Data System (ADS)

McGowan, Conor P.; Lyons, James E.; Smith, David R.

2015-04-01

Structured decision making (SDM) is an increasingly utilized approach and set of tools for addressing complex decisions in environmental management. SDM is a value-focused thinking approach that places paramount importance on first establishing clear management objectives that reflect core values of stakeholders. To be useful for management, objectives must be transparently stated in unambiguous and measurable terms. We used these concepts to develop consensus objectives for the multiple stakeholders of horseshoe crab harvest in Delaware Bay. Participating stakeholders first agreed on a qualitative statement of fundamental objectives, and then worked to convert those objectives to specific and measurable quantities, so that management decisions could be assessed. We used a constraint-based approach where the conservation objectives for Red Knots, a species of migratory shorebird that relies on horseshoe crab eggs as a food resource during migration, constrained the utility of crab harvest. Developing utility functions to effectively reflect the management objectives allowed us to incorporate stakeholder risk aversion even though different stakeholder groups were averse to different or competing risks. While measurable objectives and quantitative utility functions seem scientific, developing these objectives was fundamentally driven by the values of the participating stakeholders.

Climate change adaptation in regulated water utilities

NASA Astrophysics Data System (ADS)

Vicuna, S.; Melo, O.; Harou, J. J.; Characklis, G. W.; Ricalde, I.

2017-12-01

Concern about climate change impacts on water supply systems has grown in recent years. However, there are still few examples of pro-active interventions (e.g. infrastructure investment or policy changes) meant to address plausible future changes. Deep uncertainty associated with climate impacts, future demands, and regulatory constraints might explain why utility planning in a range of contexts doesn't explicitly consider climate change scenarios and potential adaptive responses. Given the importance of water supplies for economic development and the cost and longevity of many water infrastructure investments, large urban water supply systems could suffer from lack of pro-active climate change adaptation. Water utilities need to balance the potential for high regret stranded assets on the one side, with insufficient supplies leading to potentially severe socio-economic, political and environmental failures on the other, and need to deal with a range of interests and constraints. This work presents initial findings from a project looking at how cities in Chile, the US and the UK are developing regulatory frameworks that incorporate utility planning under uncertainty. Considering for example the city of Santiago, Chile, recent studies have shown that although high scarcity cost scenarios are plausible, pre-emptive investment to guard from possible water supply failures is still remote and not accommodated by current planning practice. A first goal of the project is to compare and contrast regulatory approaches to utility risks considering climate change adaptation measures. Subsequently we plan to develop and propose a custom approach for the city of Santiago based on lessons learned from other contexts. The methodological approach combines institutional assessment of water supply regulatory frameworks with simulation-based decision-making under uncertainty approaches. Here we present initial work comparing the regulatory frameworks in Chile, UK and USA evaluating their ability to incorporate uncertain climate and other changes into long-term infrastructure investment planning. The potential for regulatory and financial adaptive measures is explored in addition to a discussion on evaluating their appropriateness via various modelling-based intervention decision-making approaches.

Is control through utilization a cost effective Prosopis juliflora management strategy?

PubMed

Wakie, Tewodros T; Hoag, Dana; Evangelista, Paul H; Luizza, Matthew; Laituri, Melinda

2016-03-01

The invasive tree Prosopis juliflora is known to cause negative impacts on invaded ranges. High P. juliflora eradication costs have swayed developing countries to follow a new and less expensive approach known as control through utilization. However, the net benefits of this new approach have not been thoroughly evaluated. Our objective was to assess the economic feasibility of selected P. juliflora eradication and utilization approaches that are currently practiced in one of the severely affected developing countries, Ethiopia. The selected approaches include converting P. juliflora infested lands into irrigated farms (conversion), charcoal production, and seed flour production. We estimate the costs and revenues of the selected P. juliflora eradication and utilization approaches by interviewing 19 enterprise owners. We assess the economic feasibility of the enterprises by performing enterprise, break-even, investment, sensitivity, and risk analyses. Our results show that conversion to irrigated cotton is economically profitable, with Net Present Value (NPV) of 5234 US$/ha over 10 years and an interest rate of 10% per year. Conversion greatly reduces the spread of P. juliflora on farmlands. Managing P. juliflora infested lands for charcoal production with a four-year harvest cycle is profitable, with NPV of 805 US$/ha. However, the production process needs vigilant regulation to protect native plants from exploitation and caution should be taken to prevent charcoal production sites from becoming potential seed sources. Though flour from P. juliflora pods can reduce invasions by destroying viable seeds, flour enterprises in Ethiopia are unprofitable. Conversion and charcoal production can be undertaken with small investment costs, while flour production requires high investment costs. Introducing new changes in the production and management steps of P. juliflora flour might be considered to make the enterprise profitable. Our study shows that control through utilization may be a viable P. juliflora management strategy under the right environmental setting. Published by Elsevier Ltd.

LightForce Photon-Pressure Collision Avoidance: Updated Efficiency Analysis Utilizing a Highly Parallel Simulation Approach

NASA Technical Reports Server (NTRS)

Stupl, Jan; Faber, Nicolas; Foster, Cyrus; Yang, Fan Yang; Nelson, Bron; Aziz, Jonathan; Nuttall, Andrew; Henze, Chris; Levit, Creon

2014-01-01

This paper provides an updated efficiency analysis of the LightForce space debris collision avoidance scheme. LightForce aims to prevent collisions on warning by utilizing photon pressure from ground based, commercial off the shelf lasers. Past research has shown that a few ground-based systems consisting of 10 kilowatt class lasers directed by 1.5 meter telescopes with adaptive optics could lower the expected number of collisions in Low Earth Orbit (LEO) by an order of magnitude. Our simulation approach utilizes the entire Two Line Element (TLE) catalogue in LEO for a given day as initial input. Least-squares fitting of a TLE time series is used for an improved orbit estimate. We then calculate the probability of collision for all LEO objects in the catalogue for a time step of the simulation. The conjunctions that exceed a threshold probability of collision are then engaged by a simulated network of laser ground stations. After those engagements, the perturbed orbits are used to re-assess the probability of collision and evaluate the efficiency of the system. This paper describes new simulations with three updated aspects: 1) By utilizing a highly parallel simulation approach employing hundreds of processors, we have extended our analysis to a much broader dataset. The simulation time is extended to one year. 2) We analyze not only the efficiency of LightForce on conjunctions that naturally occur, but also take into account conjunctions caused by orbit perturbations due to LightForce engagements. 3) We use a new simulation approach that is regularly updating the LightForce engagement strategy, as it would be during actual operations. In this paper we present our simulation approach to parallelize the efficiency analysis, its computational performance and the resulting expected efficiency of the LightForce collision avoidance system. Results indicate that utilizing a network of four LightForce stations with 20 kilowatt lasers, 85% of all conjunctions with a probability of collision Pc > 10 (sup -6) can be mitigated.

Utilization and outcome of laparoscopic versus robotic general and bariatric surgical procedures at Academic Medical Centers.

PubMed

Villamere, James; Gebhart, Alana; Vu, Stephen; Nguyen, Ninh T

2015-07-01

Robotic-assisted general and bariatric surgery is gaining popularity among surgeons. The aim of this study was to analyze the utilization and outcome of laparoscopic versus robotic-assisted laparoscopic techniques for common elective general and bariatric surgical procedures performed at Academic Medical Centers. We analyzed data from University HealthSystem Consortium clinical database from October 2010 to February 2014 for all patients who underwent laparoscopic versus robotic techniques for eight common elective general and bariatric surgical procedures: gastric bypass, sleeve gastrectomy, gastric band, antireflux surgery, Heller myotomy (HM), cholecystectomy (LC), colectomy, rectal resection (RR). Utilization and outcome measures including demographics, in-hospital mortality, major complications, 30-day readmission, length of stay (LOS), and costs were compared between techniques. 96,694 laparoscopic and robotic procedures were analyzed. Utilization of the robotic approach was the highest for RR (21.4%), followed by HM (9.1%). There was no significant difference in in-hospital mortality or major complications between laparoscopic versus robotic techniques for all procedures. Only two procedures had improved outcome associated with the robotic approach: robotic HM and robotic LC had a shorter LOS compared to the laparoscopic approach (2.8 ± 3.6 vs. 2.3 ± 2.1; respectively, p < 0.05 for HM and 2.9 ± 2.4 vs. 2.3 ± 1.7; respectively, p < 0.05 for LC). Costs were significantly higher (21%) in the robotic group for all procedures. A subset analysis of patients with minor/moderate severity of illness showed similar results. This national analysis of academic centers showed a low utilization of robotic-assisted laparoscopic elective general and bariatric surgical procedures with the highest utilization for rectal resection. Compared to conventional laparoscopy, there were no observed clinical benefits associated with the robotic approach, but there was a consistently higher cost.

Exploring Geographic Variation of Mental Health Risk and Service Utilization of Doctors and Hospitals in Toronto: A Shared Component Spatial Modeling Approach

PubMed Central

Perlman, Christopher

2018-01-01

Mental Health has been known to vary geographically. Different rates of utilization of mental health services in local areas reflect geographic variation of mental health and complexity of health care. Variations and inequalities in how the health care system addresses risks are two critical issues for addressing population mental health. This study examines these issues by analyzing the utilization of mental health services in Toronto at the neighbourhood level. We adopted a shared component spatial modeling approach that allows simultaneous analysis of two main health service utilizations: doctor visits and hospitalizations related to mental health conditions. Our results reflect a geographic variation of both types of mental health service utilization across neighbourhoods in Toronto. We identified hot and cold spots of mental health risks that are common to both or specific to only one type of health service utilization. Based on the evidence found, we discuss intervention strategies, focusing on the hotspots and provision of health services about doctors and hospitals, to improve mental health for the neighbourhoods. Limitations of the study and further research directions are also discussed. PMID:29587426

Forecasting need and demand for home health care: a selective review

PubMed Central

Sharma, Rabinder K.

1980-01-01

Three models for forecasting home health care (HHC) needs are analyzed: HSA/SP model (Health Systems Agency of Southwestern Pennsylvania); Florida model (Florida State Department of Health and Rehabilitative Services); and Rhode Island model (Rhode Island Department of Community Affairs). A utilization approach to forecasting is also presented. In the HSA/SP and Florida models, need for HHC is based on a certain proportion of (a) hospital admissions and (b) patients entering HHC from other sources. The major advantage of these models is that they are relatively easy to use and explain; their major weaknesses are an imprecise definition of need and an incomplete model specification. The Rhode Island approach defines need for HHC in terms of the health status of the population as measured by chronic activity limitations. The major strengths of this approach are its explicit assumptions and its emphasis on consumer needs. The major drawback is that it requires considerable local area data. The utilization approach is based on extrapolation from observed utilization experience of the target population. Its main limitation is that it is based on current market imperfections; its major advantage is that it exposes existing deficiencies in HHC. The author concludes that each approach should be tested empirically in order to refine it, and that need and demand approaches be used jointly in the planning process. PMID:6893631

Transformative learning and research utilization in nursing practice: a missing link?

PubMed

Matthew-Maich, Nancy; Ploeg, Jenny; Jack, Susan; Dobbins, Maureen

2010-03-01

Poor or inconsistent research utilization into clinical practice is a recurrent theme across study contexts, rendering leaders disillusioned with how best to foster the uptake of research into nursing practice. This makes it imperative to look to new approaches. Research utilization involves a learning process engaging attitudes, beliefs, and behaviors; yet, this is often overlooked in approaches and models used to facilitate research use. This oversight may offer some explanation to the limited progress in research utilization to date. Transformation Theory offers an explanatory theory and specific strategies (critical reflection and critical discourse) to explore attitudes, beliefs, and behaviors so that they are understood, validated, and can better guide actions. The purpose of this article was to explore what Transformation Theory can contribute to research utilization initiatives in nursing practice. Transformation Theory and transformative learning strategies are discussed and critically analyzed in consideration of their potential roles in fostering research utilization in clinical nursing practice. (1) Research utilization is a learning process that involves knowledge, skills, feelings, attitudes, and beliefs. (2) Transformative learning strategies of critical reflection and discourse can facilitate insight into experiences, finding shared meanings among groups of people, and understanding/validating beliefs, attitudes, and feelings so they can more consciously guide future actions. This dimension is frequently neglected in research utilization efforts. (3) In combination with research utilization theories, Transformation Theory may be a missing link to make research utilization initiatives more effective in rendering and sustaining nursing practice change, thus enhancing client care and well-being. (4) Research and further consideration are both warranted and needed.

Advanced fuel system technology for utilizing broadened property aircraft fuels

NASA Technical Reports Server (NTRS)

Reck, G. M.

1980-01-01

Possible changes in fuel properties are identified based on current trends and projections. The effect of those changes with respect to the aircraft fuel system are examined and some technological approaches to utilizing those fuels are described.

Advancements in medicine from aerospace research

NASA Technical Reports Server (NTRS)

Wooten, F. T.

1971-01-01

NASA has taken the lead in implementing the concept of technology utilization, and the Technology Utilization Program is the first vital step in the goal of a technological society to insure maximum benefit from the costs of technology. Experience has shown that the active approach to technology transfer is unique and is well received in the medical profession when appropriate problems are tackled. The problem solving approach is a useful one at the precise time when medicine is recognizing the need for new technology.

Compiler-assisted static checkpoint insertion

NASA Technical Reports Server (NTRS)

Long, Junsheng; Fuchs, W. K.; Abraham, Jacob A.

1992-01-01

This paper describes a compiler-assisted approach for static checkpoint insertion. Instead of fixing the checkpoint location before program execution, a compiler enhanced polling mechanism is utilized to maintain both the desired checkpoint intervals and reproducible checkpoint 1ocations. The technique has been implemented in a GNU CC compiler for Sun 3 and Sun 4 (Sparc) processors. Experiments demonstrate that the approach provides for stable checkpoint intervals and reproducible checkpoint placements with performance overhead comparable to a previously presented compiler assisted dynamic scheme (CATCH) utilizing the system clock.

Comparing digital data processing techniques for surface mine and reclamation monitoring

NASA Technical Reports Server (NTRS)

Witt, R. G.; Bly, B. G.; Campbell, W. J.; Bloemer, H. H. L.; Brumfield, J. O.

1982-01-01

The results of three techniques used for processing Landsat digital data are compared for their utility in delineating areas of surface mining and subsequent reclamation. An unsupervised clustering algorithm (ISOCLS), a maximum-likelihood classifier (CLASFY), and a hybrid approach utilizing canonical analysis (ISOCLS/KLTRANS/ISOCLS) were compared by means of a detailed accuracy assessment with aerial photography at NASA's Goddard Space Flight Center. Results show that the hybrid approach was superior to the traditional techniques in distinguishing strip mined and reclaimed areas.

Practical considerations in the measurement of the internal relative humidity of pharmaceutical packages with data loggers.

PubMed

Nelson, Eric D; Huang, Henry

2011-03-01

The utility of temperature/humidity data loggers are evaluated as a low-cost approach to enrich practical understanding of the actual time dependent humidity that a pharmaceutical product is exposed to. While this approach is found to have significant utility in general, small systematic biases in the measurements due to the presence of the data logger are observed. Taking these biases into account enables more productive extrapolation of measured time/humidity profiles. © 2011 American Association of Pharmaceutical Scientists

Multi-attribute integrated measurement of node importance in complex networks.

PubMed

Wang, Shibo; Zhao, Jinlou

2015-11-01

The measure of node importance in complex networks is very important to the research of networks stability and robustness; it also can ensure the security of the whole network. Most researchers have used a single indicator to measure the networks node importance, so that the obtained measurement results only reflect certain aspects of the networks with a loss of information. Meanwhile, because of the difference of networks topology, the nodes' importance should be described by combining the character of the networks topology. Most of the existing evaluation algorithms cannot completely reflect the circumstances of complex networks, so this paper takes into account the degree of centrality, the relative closeness centrality, clustering coefficient, and topology potential and raises an integrated measuring method to measure the nodes' importance. This method can reflect nodes' internal and outside attributes and eliminate the influence of network structure on the node importance. The experiments of karate network and dolphin network show that networks topology structure integrated measure has smaller range of metrical result than a single indicator and more universal. Experiments show that attacking the North American power grid and the Internet network with the method has a faster convergence speed than other methods.

Application of Visual Attention in Seismic Attribute Analysis

NASA Astrophysics Data System (ADS)

He, M.; Gu, H.; Wang, F.

2016-12-01

It has been proved that seismic attributes can be used to predict reservoir. The joint of multi-attribute and geological statistics, data mining, artificial intelligence, further promote the development of the seismic attribute analysis. However, the existing methods tend to have multiple solutions and insufficient generalization ability, which is mainly due to the complex relationship between seismic data and geological information, and undoubtedly own partly to the methods applied. Visual attention is a mechanism model of the human visual system which can concentrate on a few significant visual objects rapidly, even in a mixed scene. Actually, the model qualify good ability of target detection and recognition. In our study, the targets to be predicted are treated as visual objects, and an object representation based on well data is made in the attribute dimensions. Then in the same attribute space, the representation is served as a criterion to search the potential targets outside the wells. This method need not predict properties by building up a complicated relation between attributes and reservoir properties, but with reference to the standard determined before. So it has pretty good generalization ability, and the problem of multiple solutions can be weakened by defining the threshold of similarity.

District Heating Systems Performance Analyses. Heat Energy Tariff

NASA Astrophysics Data System (ADS)

Ziemele, Jelena; Vigants, Girts; Vitolins, Valdis; Blumberga, Dagnija; Veidenbergs, Ivars

2014-12-01

The paper addresses an important element of the European energy sector: the evaluation of district heating (DH) system operations from the standpoint of increasing energy efficiency and increasing the use of renewable energy resources. This has been done by developing a new methodology for the evaluation of the heat tariff. The paper presents an algorithm of this methodology, which includes not only a data base and calculation equation systems, but also an integrated multi-criteria analysis module using MADM/MCDM (Multi-Attribute Decision Making / Multi-Criteria Decision Making) based on TOPSIS (Technique for Order Performance by Similarity to Ideal Solution). The results of the multi-criteria analysis are used to set the tariff benchmarks. The evaluation methodology has been tested for Latvian heat tariffs, and the obtained results show that only half of heating companies reach a benchmark value equal to 0.5 for the efficiency closeness to the ideal solution indicator. This means that the proposed evaluation methodology would not only allow companies to determine how they perform with regard to the proposed benchmark, but also to identify their need to restructure so that they may reach the level of a low-carbon business.

An unsupervised technique for optimal feature selection in attribute profiles for spectral-spatial classification of hyperspectral images

NASA Astrophysics Data System (ADS)

Bhardwaj, Kaushal; Patra, Swarnajyoti

2018-04-01

Inclusion of spatial information along with spectral features play a significant role in classification of remote sensing images. Attribute profiles have already proved their ability to represent spatial information. In order to incorporate proper spatial information, multiple attributes are required and for each attribute large profiles need to be constructed by varying the filter parameter values within a wide range. Thus, the constructed profiles that represent spectral-spatial information of an hyperspectral image have huge dimension which leads to Hughes phenomenon and increases computational burden. To mitigate these problems, this work presents an unsupervised feature selection technique that selects a subset of filtered image from the constructed high dimensional multi-attribute profile which are sufficiently informative to discriminate well among classes. In this regard the proposed technique exploits genetic algorithms (GAs). The fitness function of GAs are defined in an unsupervised way with the help of mutual information. The effectiveness of the proposed technique is assessed using one-against-all support vector machine classifier. The experiments conducted on three hyperspectral data sets show the robustness of the proposed method in terms of computation time and classification accuracy.

Detection of multiple perturbations in multi-omics biological networks.

PubMed

Griffin, Paula J; Zhang, Yuqing; Johnson, William Evan; Kolaczyk, Eric D

2018-05-17

Cellular mechanism-of-action is of fundamental concern in many biological studies. It is of particular interest for identifying the cause of disease and learning the way in which treatments act against disease. However, pinpointing such mechanisms is difficult, due to the fact that small perturbations to the cell can have wide-ranging downstream effects. Given a snapshot of cellular activity, it can be challenging to tell where a disturbance originated. The presence of an ever-greater variety of high-throughput biological data offers an opportunity to examine cellular behavior from multiple angles, but also presents the statistical challenge of how to effectively analyze data from multiple sources. In this setting, we propose a method for mechanism-of-action inference by extending network filtering to multi-attribute data. We first estimate a joint Gaussian graphical model across multiple data types using penalized regression and filter for network effects. We then apply a set of likelihood ratio tests to identify the most likely site of the original perturbation. In addition, we propose a conditional testing procedure to allow for detection of multiple perturbations. We demonstrate this methodology on paired gene expression and methylation data from The Cancer Genome Atlas (TCGA). © 2018, The International Biometric Society.

Multi-attribute criteria applied to electric generation energy system analysis LDRD.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuswa, Glenn W.; Tsao, Jeffrey Yeenien; Drennen, Thomas E.

2005-10-01

This report began with a Laboratory-Directed Research and Development (LDRD) project to improve Sandia National Laboratories multidisciplinary capabilities in energy systems analysis. The aim is to understand how various electricity generating options can best serve needs in the United States. The initial product is documented in a series of white papers that span a broad range of topics, including the successes and failures of past modeling studies, sustainability, oil dependence, energy security, and nuclear power. Summaries of these projects are included here. These projects have provided a background and discussion framework for the Energy Systems Analysis LDRD team to carrymore » out an inter-comparison of many of the commonly available electric power sources in present use, comparisons of those options, and efforts needed to realize progress towards those options. A computer aid has been developed to compare various options based on cost and other attributes such as technological, social, and policy constraints. The Energy Systems Analysis team has developed a multi-criteria framework that will allow comparison of energy options with a set of metrics that can be used across all technologies. This report discusses several evaluation techniques and introduces the set of criteria developed for this LDRD.« less

Demotivating incentives and motivation crowding out in charitable giving

PubMed Central

Chao, Matthew

2017-01-01

Research has shown that extrinsic incentives can crowd out intrinsic motivation in many contexts. Despite this, many nonprofits offer conditional thank-you gifts, such as mugs or tote bags, in exchange for donations. In collaboration with a nonprofit, this study implements a direct mail field experiment and demonstrates that thank-you gifts reduced donation rates in a fundraising campaign. Attention-based multiattribute choice models suggest that this is because prospective donors shift attention to the salient gift offer, causing them to underweight less salient intrinsic motives. Attention to the gift may also cause individuals to adopt a more cost–benefit mindset, further de-emphasizing intrinsic motives. Consistent with these hypotheses, crowding out was driven by those who donated higher amounts in the previous year (i.e., those who likely had higher intrinsic motivation). In a complementary online experiment, thank-you gifts also reduced donation rates but only when the gift was visually salient. This corroborates the mediating role of attention in crowding out. Taken together, the laboratory and field results demonstrate that this fundraising technique can be demotivating in some contexts and that this may occur through an attention-based mechanism. PMID:28655844

Risk Preferences, Probability Weighting, and Strategy Tradeoffs in Wildfire Management.

PubMed

Hand, Michael S; Wibbenmeyer, Matthew J; Calkin, David E; Thompson, Matthew P

2015-10-01

Wildfires present a complex applied risk management environment, but relatively little attention has been paid to behavioral and cognitive responses to risk among public agency wildfire managers. This study investigates responses to risk, including probability weighting and risk aversion, in a wildfire management context using a survey-based experiment administered to federal wildfire managers. Respondents were presented with a multiattribute lottery-choice experiment where each lottery is defined by three outcome attributes: expenditures for fire suppression, damage to private property, and exposure of firefighters to the risk of aviation-related fatalities. Respondents choose one of two strategies, each of which includes "good" (low cost/low damage) and "bad" (high cost/high damage) outcomes that occur with varying probabilities. The choice task also incorporates an information framing experiment to test whether information about fatality risk to firefighters alters managers' responses to risk. Results suggest that managers exhibit risk aversion and nonlinear probability weighting, which can result in choices that do not minimize expected expenditures, property damage, or firefighter exposure. Information framing tends to result in choices that reduce the risk of aviation fatalities, but exacerbates nonlinear probability weighting. © 2015 Society for Risk Analysis.

Single-process versus multiple-strategy models of decision making: evidence from an information intrusion paradigm.

PubMed

Söllner, Anke; Bröder, Arndt; Glöckner, Andreas; Betsch, Tilmann

2014-02-01

When decision makers are confronted with different problems and situations, do they use a uniform mechanism as assumed by single-process models (SPMs) or do they choose adaptively from a set of available decision strategies as multiple-strategy models (MSMs) imply? Both frameworks of decision making have gathered a lot of support, but only rarely have they been contrasted with each other. Employing an information intrusion paradigm for multi-attribute decisions from givens, SPM and MSM predictions on information search, decision outcomes, attention, and confidence judgments were derived and tested against each other in two experiments. The results consistently support the SPM view: Participants seemingly using a "take-the-best" (TTB) strategy do not ignore TTB-irrelevant information as MSMs would predict, but adapt the amount of information searched, choose alternative choice options, and show varying confidence judgments contingent on the quality of the "irrelevant" information. The uniformity of these findings underlines the adequacy of the novel information intrusion paradigm and comprehensively promotes the notion of a uniform decision making mechanism as assumed by single-process models. Copyright © 2013 The Authors. Published by Elsevier B.V. All rights reserved.

A Stochastic Multi-Attribute Assessment of Energy Options for Fairbanks, Alaska

NASA Astrophysics Data System (ADS)

Read, L.; Madani, K.; Mokhtari, S.; Hanks, C. L.; Sheets, B.

2012-12-01

Many competing projects have been proposed to address Interior Alaska's high cost of energy—both for electricity production and for heating. Public and private stakeholders are considering the costs associated with these competing projects which vary in fuel source, subsidy requirements, proximity, and other factors. As a result, the current projects under consideration involve a complex cost structure of potential subsidies and reliance on present and future market prices, introducing a significant amount of uncertainty associated with each selection. Multi-criteria multi-decision making (MCMDM) problems of this nature can benefit from game theory and systems engineering methods, which account for behavior and preferences of stakeholders in the analysis to produce feasible and relevant solutions. This work uses a stochastic MCMDM framework to evaluate the trade-offs of each proposed project based on a complete cost analysis, environmental impact, and long-term sustainability. Uncertainty in the model is quantified via a Monte Carlo analysis, which helps characterize the sensitivity and risk associated with each project. Based on performance measures and criteria outlined by the stakeholders, a decision matrix will inform policy on selecting a project that is both efficient and preferred by the constituents.

Application of stochastic multiattribute analysis to assessment of single walled carbon nanotube synthesis processes.

PubMed

Canis, Laure; Linkov, Igor; Seager, Thomas P

2010-11-15

The unprecedented uncertainty associated with engineered nanomaterials greatly expands the need for research regarding their potential environmental consequences. However, decision-makers such as regulatory agencies, product developers, or other nanotechnology stakeholders may not find the results of such research directly informative of decisions intended to mitigate environmental risks. To help interpret research findings and prioritize new research needs, there is an acute need for structured decision-analytic aids that are operable in a context of extraordinary uncertainty. Whereas existing stochastic decision-analytic techniques explore uncertainty only in decision-maker preference information, this paper extends model uncertainty to technology performance. As an illustrative example, the framework is applied to the case of single-wall carbon nanotubes. Four different synthesis processes (arc, high pressure carbon monoxide, chemical vapor deposition, and laser) are compared based on five salient performance criteria. A probabilistic rank ordering of preferred processes is determined using outranking normalization and a linear-weighted sum for different weighting scenarios including completely unknown weights and four fixed-weight sets representing hypothetical stakeholder views. No single process pathway dominates under all weight scenarios, but it is likely that some inferior process technologies could be identified as low priorities for further research.

Demotivating incentives and motivation crowding out in charitable giving.

PubMed

Chao, Matthew

2017-07-11

Research has shown that extrinsic incentives can crowd out intrinsic motivation in many contexts. Despite this, many nonprofits offer conditional thank-you gifts, such as mugs or tote bags, in exchange for donations. In collaboration with a nonprofit, this study implements a direct mail field experiment and demonstrates that thank-you gifts reduced donation rates in a fundraising campaign. Attention-based multiattribute choice models suggest that this is because prospective donors shift attention to the salient gift offer, causing them to underweight less salient intrinsic motives. Attention to the gift may also cause individuals to adopt a more cost-benefit mindset, further de-emphasizing intrinsic motives. Consistent with these hypotheses, crowding out was driven by those who donated higher amounts in the previous year (i.e., those who likely had higher intrinsic motivation). In a complementary online experiment, thank-you gifts also reduced donation rates but only when the gift was visually salient. This corroborates the mediating role of attention in crowding out. Taken together, the laboratory and field results demonstrate that this fundraising technique can be demotivating in some contexts and that this may occur through an attention-based mechanism.

EFFECTIVE INDICES FOR MONITORING MENTAL WORKLOAD WHILE PERFORMING MULTIPLE TASKS.

PubMed

Hsu, Bin-Wei; Wang, Mao-Jiun J; Chen, Chi-Yuan; Chen, Fang

2015-08-01

This study identified several physiological indices that can accurately monitor mental workload while participants performed multiple tasks with the strategy of maintaining stable performance and maximizing accuracy. Thirty male participants completed three 10-min. simulated multitasks: MATB (Multi-Attribute Task Battery) with three workload levels. Twenty-five commonly used mental workload measures were collected, including heart rate, 12 HRV (heart rate variability), 10 EEG (electroencephalography) indices (α, β, θ, α/θ, θ/β from O1-O2 and F4-C4), and two subjective measures. Analyses of index sensitivity showed that two EEG indices, θ and α/θ (F4-C4), one time-domain HRV-SDNN (standard deviation of inter-beat intervals), and four frequency-domain HRV: VLF (very low frequency), LF (low frequency), %HF (percentage of high frequency), and LF/HF were sensitive to differentiate high workload. EEG α/θ (F4-C4) and LF/HF were most effective for monitoring high mental workload. LF/HF showed the highest correlations with other physiological indices. EEG α/θ (F4-C4) showed strong correlations with subjective measures across different mental workload levels. Operation strategy would affect the sensitivity of EEG α (F4-C4) and HF.

The predictive validity of prospect theory versus expected utility in health utility measurement.

PubMed

Abellan-Perpiñan, Jose Maria; Bleichrodt, Han; Pinto-Prades, Jose Luis

2009-12-01

Most health care evaluations today still assume expected utility even though the descriptive deficiencies of expected utility are well known. Prospect theory is the dominant descriptive alternative for expected utility. This paper tests whether prospect theory leads to better health evaluations than expected utility. The approach is purely descriptive: we explore how simple measurements together with prospect theory and expected utility predict choices and rankings between more complex stimuli. For decisions involving risk prospect theory is significantly more consistent with rankings and choices than expected utility. This conclusion no longer holds when we use prospect theory utilities and expected utilities to predict intertemporal decisions. The latter finding cautions against the common assumption in health economics that health state utilities are transferable across decision contexts. Our results suggest that the standard gamble and algorithms based on, should not be used to value health.

Computational medicinal chemistry in fragment-based drug discovery: what, how and when.

PubMed

Rabal, Obdulia; Urbano-Cuadrado, Manuel; Oyarzabal, Julen

2011-01-01

The use of fragment-based drug discovery (FBDD) has increased in the last decade due to the encouraging results obtained to date. In this scenario, computational approaches, together with experimental information, play an important role to guide and speed up the process. By default, FBDD is generally considered as a constructive approach. However, such additive behavior is not always present, therefore, simple fragment maturation will not always deliver the expected results. In this review, computational approaches utilized in FBDD are reported together with real case studies, where applicability domains are exemplified, in order to analyze them, and then, maximize their performance and reliability. Thus, a proper use of these computational tools can minimize misleading conclusions, keeping the credit on FBDD strategy, as well as achieve higher impact in the drug-discovery process. FBDD goes one step beyond a simple constructive approach. A broad set of computational tools: docking, R group quantitative structure-activity relationship, fragmentation tools, fragments management tools, patents analysis and fragment-hopping, for example, can be utilized in FBDD, providing a clear positive impact if they are utilized in the proper scenario - what, how and when. An initial assessment of additive/non-additive behavior is a critical point to define the most convenient approach for fragments elaboration.

Semi-automatic classification of glaciovolcanic landforms: An object-based mapping approach based on geomorphometry

NASA Astrophysics Data System (ADS)

Pedersen, G. B. M.

2016-02-01

A new object-oriented approach is developed to classify glaciovolcanic landforms (Procedure A) and their landform elements boundaries (Procedure B). It utilizes the principle that glaciovolcanic edifices are geomorphometrically distinct from lava shields and plains (Pedersen and Grosse, 2014), and the approach is tested on data from Reykjanes Peninsula, Iceland. The outlined procedures utilize slope and profile curvature attribute maps (20 m/pixel) and the classified results are evaluated quantitatively through error matrix maps (Procedure A) and visual inspection (Procedure B). In procedure A, the highest obtained accuracy is 94.1%, but even simple mapping procedures provide good results (> 90% accuracy). Successful classification of glaciovolcanic landform element boundaries (Procedure B) is also achieved and this technique has the potential to delineate the transition from intraglacial to subaerial volcanic activity in orthographic view. This object-oriented approach based on geomorphometry overcomes issues with vegetation cover, which has been typically problematic for classification schemes utilizing spectral data. Furthermore, it handles complex edifice outlines well and is easily incorporated into a GIS environment, where results can be edited or fused with other mapping results. The approach outlined here is designed to map glaciovolcanic edifices within the Icelandic neovolcanic zone but may also be applied to similar subaerial or submarine volcanic settings, where steep volcanic edifices are surrounded by flat plains.

Design, development, and evaluation of an interactive simulator for engineering ethics education (SEEE).

PubMed

Chung, Christopher A; Alfred, Michael

2009-06-01

Societal pressures, accreditation organizations, and licensing agencies are emphasizing the importance of ethics in the engineering curriculum. Traditionally, this subject has been taught using dogma, heuristics, and case study approaches. Most recently a number of organizations have sought to increase the utility of these approaches by utilizing the Internet. Resources from these organizations include on-line courses and tests, videos, and DVDs. While these individual approaches provide a foundation on which to base engineering ethics, they may be limited in developing a student's ability to identify, analyze, and respond to engineering ethics situations outside of the classroom environment. More effective approaches utilize a combination of these types of approaches. This paper describes the design and development of an internet based interactive Simulator for Engineering Ethics Education. The simulator places students in first person perspective scenarios involving different types of ethical situations. Students must gather data, assess the situation, and make decisions. This requires students to develop their own ability to identify and respond to ethical engineering situations. A limited comparison between the internet based interactive simulator and conventional internet web based instruction indicates a statistically significant improvement of 32% in instructional effectiveness. The simulator is currently being used at the University of Houston to help fulfill ABET requirements.

Health State Utilities Associated with Glucose Monitoring Devices.

PubMed

Matza, Louis S; Stewart, Katie D; Davies, Evan W; Hellmund, Richard; Polonsky, William H; Kerr, David

2017-03-01

Glucose monitoring is important for patients with diabetes treated with insulin. Conventional glucose monitoring requires a blood sample, typically obtained by pricking the finger. A new sensor-based system called "flash glucose monitoring" monitors glucose levels with a sensor worn on the arm, without requiring blood samples. To estimate the utility difference between these two glucose monitoring approaches for use in cost-utility models. In time trade-off interviews, general population participants in the United Kingdom (London and Edinburgh) valued health states that were drafted and refined on the basis of literature, clinician input, and a pilot study. The health states had identical descriptions of diabetes and insulin treatment, differing only in glucose monitoring approach. A total of 209 participants completed the interviews (51.7% women; mean age = 42.1 years). Mean utilities were 0.851 ± 0.140 for conventional monitoring and 0.882 ± 0.121 for flash monitoring (significant difference between the mean utilities; t = 8.3; P < 0.0001). Of the 209 participants, 78 (37.3%) had a higher utility for flash monitoring, 2 (1.0%) had a higher utility for conventional monitoring, and 129 (61.7%) had the same utility for both health states. The flash glucose monitoring system was associated with a significantly greater utility than the conventional monitoring system. This difference may be useful in cost-utility models comparing the value of glucose monitoring devices for patients with diabetes. This study adds to the literature on treatment process utilities, suggesting that time trade-off methods may be used to quantify preferences among medical devices. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Robotic and endoscopic transoral thyroidectomy: feasibility and description of the technique in the cadaveric model.

PubMed

Kahramangil, Bora; Mohsin, Khuzema; Alzahrani, Hassan; Bu Ali, Daniah; Tausif, Syed; Kang, Sang-Wook; Kandil, Emad; Berber, Eren

2017-12-01

Numerous new approaches have been described over the years to improve the cosmetic outcomes of thyroid surgery. Transoral approach is a new technique that aims to achieve superior cosmetic outcomes by concealing the incision in the oral cavity. Transoral thyroidectomy through vestibular approach was performed in two institutions on cadaveric models. Procedure was performed endoscopically in one institution, while the robotic technique was utilized at the other. Transoral thyroidectomy was successfully performed at both institutions with robotic and endoscopic techniques. All vital structures were identified and preserved. Transoral thyroidectomy has been performed in animal and cadaveric models, as well as in some clinical studies. Our initial experience indicates the feasibility of this approach. More clinical studies are required to elucidate its full utility.

Right back like we left something: examining the commodification of Blackness in social services to address racial disparities - the case of Hartford.

PubMed

Searcy, Yan

2018-05-14

Market-based approaches to addressing racial disparities have essentially re-commodified Blackness. Utilizing Hartford, which contains the largest percentage of Blacks per capita in Connecticut, this article examines market-based approaches to address racial disparities while discussing Blackness as an enduring commodity that is tied to private sector profit. The study argues that market based approaches incentivize punitive approaches to social problems associated with Blackness. The study concludes by suggesting that addressing disparities utilizing markets requires reimagining policy incentives to focus on prevention and treatment of social problems associated with Blackness. Failure to reimagine policy incentives serves to commodify Blackness whereby industries benefit from the continuity of disparities rather than the elimination of disparities.

EFPI sensor utilizing optical spectrum analyzer with tunable laser: detection of baseline oscillations faster than spectrum acquisition rate

NASA Astrophysics Data System (ADS)

Ushakov, Nikolai; Liokumovich, Leonid

2014-05-01

A novel approach for extrinsic Fabry-Perot interferometer baseline measurement has been developed. The principles of frequency-scanning interferometry are utilized for registration of the interferometer spectral function, from which the baseline is demodulated. The proposed approach enables one to capture the absolute baseline variations at frequencies much higher than the spectral acquisition rate. Despite the conventional approaches, associating a single baseline indication to the registered spectrum, in the proposed method a modified frequency detection procedure is applied to the spectrum. This provides an ability to capture the baseline variations which took place during the spectrum acquisition. The limitations on the parameters of the possibly registered baseline variations are formulated. The experimental verification of the proposed approach for different perturbations has been performed.

Topological anomaly detection performance with multispectral polarimetric imagery

NASA Astrophysics Data System (ADS)

Gartley, M. G.; Basener, W.,

2009-05-01

Polarimetric imaging has demonstrated utility for increasing contrast of manmade targets above natural background clutter. Manual detection of manmade targets in multispectral polarimetric imagery can be challenging and a subjective process for large datasets. Analyst exploitation may be improved utilizing conventional anomaly detection algorithms such as RX. In this paper we examine the performance of a relatively new approach to anomaly detection, which leverages topology theory, applied to spectral polarimetric imagery. Detection results for manmade targets embedded in a complex natural background will be presented for both the RX and Topological Anomaly Detection (TAD) approaches. We will also present detailed results examining detection sensitivities relative to: (1) the number of spectral bands, (2) utilization of Stoke's images versus intensity images, and (3) airborne versus spaceborne measurements.

Full Costing of Business Programs: Benefits and Caveats

ERIC Educational Resources Information Center

Simmons, Cynthia; Wright, Michael; Jones, Vernon

2006-01-01

Purpose: To suggest an approach to program costing that includes the approaches and concepts developed in activity based costing. Design/methodology/approach: The paper utilizes a hypothetical case study of an Executive MBA program as a means of illustrating the suggested approach to costing. Findings: The paper illustrates both the benefits of…

Behind-the-Counter Statins: A Silver Bullet for Reducing Costs and Increasing Access?

PubMed Central

Sood, Neeraj; Sun, Eric; Zhuo, Xiaohui

2012-01-01

Objective To examine how the 2004 introduction of behind-the-counter (BTC) simvastatin in the United Kingdom affected utilization, prices, and expenditures. Data Sources/Study Setting Secondary data on simvastatin utilization, prices, and expenditures between 1997 and 2007 in the United Kingdom and four other countries. Study Design We used a difference-in-differences approach to estimate how the introduction of BTC simvastatin affected utilization, prices, and expenditures. This approach compares outcomes in the United Kingdom before and after the introduction of BTC simvastatin, using outcomes in countries where the drug remained prescription only to control for possible confounders. Data Collection/Extraction Methods Data on simvastain utilization, prices, and expenditures between 1997 and 2007 in the United Kingdom and four other countries were obtained from an outside vendor. Principal Findings The introduction of BTC simvastatin in the United Kingdom led to a significant increase in utilization of simvastatin and a significant decline in expenditures for simvastatin purchases. Our results are robust to alternate model specifications. Conclusions Behind-the-counter statins have the potential to simultaneously increase use of statins and lower expenditures. PMID:22091792

Muck Utilization in Urban Transportation Tunneling Process

DOT National Transportation Integrated Search

1977-12-01

The purpose of this study is to develop a workable approach to muck utilization for transit tunnels, including cut and cover construction, in the urban area. This report presents the results of a detailed investigation into the potential for muck uti...

Obsolescence, Weeding, and the Utilization of Space.

ERIC Educational Resources Information Center

Lancaster, F. W.

1988-01-01

Suggests an objective approach to weeding library materials and discusses ways of measuring obsolescence and of controlling variables to provide a true picture of aging. Weeding is shown to improve space utilization and the quality of a collection. (5 references) (MES)

Flipped classroom or an active lecture?

PubMed

Pickering, James D; Roberts, David J H

2018-01-01

Recent changes in anatomy education have seen the introduction of flipped classrooms as a replacement to the traditional didactic lecture. This approach utilizes the increasing availability of digital technology to create learning resources that can be accessed prior to attending class, with face-to-face sessions then becoming more student-centered via discussion, collaborative learning, and problem-solving activities. Although this approach may appear intuitive, this viewpoint commentary presents a counter opinion and highlights a simple alternative that utilizes evidence-based active learning approaches as part of the traditional lecture. The active lecture takes the traditional lecture, and (1) ensures the lecture content is relevant and has clear objectives, (2) contains lecture material that is designed according to the latest evidence-base, (3) complements it with additional supplementary material, (4) creates space to check prior understanding and knowledge levels, and (5) utilizes suitable technology to facilitate continual engagement and interaction. Clin. Anat. 31:118-121, 2018. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Solar energy: Technology and applications

NASA Technical Reports Server (NTRS)

Williams, J. R.

1974-01-01

It is pointed out that in 1970 the total energy consumed in the U.S. was equal to the energy of sunlight received by only 0.15% of the land area of the continental U.S. The utilization of solar energy might, therefore, provide an approach for solving the energy crisis produced by the consumption of irreplaceable fossil fuels at a steadily increasing rate. Questions regarding the availability of solar energy are discussed along with the design of solar energy collectors and various approaches for heating houses and buildings by utilizing solar radiation. Other subjects considered are related to the heating of water partly or entirely with solar energy, the design of air conditioning systems based on the use of solar energy, electric power generation by a solar thermal and a photovoltaic approach, solar total energy systems, industrial and agricultural applications of solar energy, solar stills, the utilization of ocean thermal power, power systems based on the use of wind, and solar-energy power systems making use of geosynchronous power plants.

The Whole Language Approach versus the Basal Reading Approach and the Effects on Reading Achievement Scores.

ERIC Educational Resources Information Center

Puorro, Michelle

A study examined two first-grade classrooms implementing the whole language approach and two utilizing the basal reading approach to determine the differences, if any, between the treatments. The hypothesis was that the whole language reading approach when combined with a phonics program would not result in higher test scores on a standardized…

Spacecraft utility and the development of confidence intervals for criticality of anomalies

NASA Technical Reports Server (NTRS)

Williams, R. E.

1980-01-01

The concept of spacecraft utility, a measure of its performance in orbit, is discussed and its formulation is described. Performance is defined in terms of the malfunctions that occur and the criticality to the mission of these malfunctions. Different approaches to establishing average or expected values of criticality are discussed and confidence intervals are developed for parameters used in the computation of utility.

Comparison of candidate solar array maximum power utilization approaches. [for spacecraft propulsion

NASA Technical Reports Server (NTRS)

Costogue, E. N.; Lindena, S.

1976-01-01

A study was made of five potential approaches that can be utilized to detect the maximum power point of a solar array while sustaining operations at or near maximum power and without endangering stability or causing array voltage collapse. The approaches studied included: (1) dynamic impedance comparator, (2) reference array measurement, (3) onset of solar array voltage collapse detection, (4) parallel tracker, and (5) direct measurement. The study analyzed the feasibility and adaptability of these approaches to a future solar electric propulsion (SEP) mission, and, specifically, to a comet rendezvous mission. Such missions presented the most challenging requirements to a spacecraft power subsystem in terms of power management over large solar intensity ranges of 1.0 to 3.5 AU. The dynamic impedance approach was found to have the highest figure of merit, and the reference array approach followed closely behind. The results are applicable to terrestrial solar power systems as well as to other than SEP space missions.

The Treatment of Non-Fluent Utterance--A Behavioral Approach

ERIC Educational Resources Information Center

Wohl, Maud T.

1970-01-01

Indicates that a behavioral approach, utilizing an electronic metronome in speech and motor activities, is highly effective in reducing the occurrence of stammering in children and adults. Bibliography. (RW)

Fractional Order Modeling of Atmospheric Turbulence - A More Accurate Modeling Methodology for Aero Vehicles

NASA Technical Reports Server (NTRS)

Kopasakis, George

2014-01-01

The presentation covers a recently developed methodology to model atmospheric turbulence as disturbances for aero vehicle gust loads and for controls development like flutter and inlet shock position. The approach models atmospheric turbulence in their natural fractional order form, which provides for more accuracy compared to traditional methods like the Dryden model, especially for high speed vehicle. The presentation provides a historical background on atmospheric turbulence modeling and the approaches utilized for air vehicles. This is followed by the motivation and the methodology utilized to develop the atmospheric turbulence fractional order modeling approach. Some examples covering the application of this method are also provided, followed by concluding remarks.

Research opportunities to advance solar energy utilization.

PubMed

Lewis, Nathan S

2016-01-22

Major developments, as well as remaining challenges and the associated research opportunities, are evaluated for three technologically distinct approaches to solar energy utilization: solar electricity, solar thermal, and solar fuels technologies. Much progress has been made, but research opportunities are still present for all approaches. Both evolutionary and revolutionary technology development, involving foundational research, applied research, learning by doing, demonstration projects, and deployment at scale will be needed to continue this technology-innovation ecosystem. Most of the approaches still offer the potential to provide much higher efficiencies, much lower costs, improved scalability, and new functionality, relative to the embodiments of solar energy-conversion systems that have been developed to date. Copyright © 2016, American Association for the Advancement of Science.

Utility-preserving transaction data anonymization with low information loss.

PubMed

Loukides, Grigorios; Gkoulalas-Divanis, Aris

2012-08-01

Transaction data record various information about individuals, including their purchases and diagnoses, and are increasingly published to support large-scale and low-cost studies in domains such as marketing and medicine. However, the dissemination of transaction data may lead to privacy breaches, as it allows an attacker to link an individual's record to their identity. Approaches that anonymize data by eliminating certain values in an individual's record or by replacing them with more general values have been proposed recently, but they often produce data of limited usefulness. This is because these approaches adopt value transformation strategies that do not guarantee data utility in intended applications and objective measures that may lead to excessive data distortion. In this paper, we propose a novel approach for anonymizing data in a way that satisfies data publishers' utility requirements and incurs low information loss. To achieve this, we introduce an accurate information loss measure and an effective anonymization algorithm that explores a large part of the problem space. An extensive experimental study, using click-stream and medical data, demonstrates that our approach permits many times more accurate query answering than the state-of-the-art methods, while it is comparable to them in terms of efficiency.

Utility-preserving transaction data anonymization with low information loss

PubMed Central

Loukides, Grigorios; Gkoulalas-Divanis, Aris

2012-01-01

Transaction data record various information about individuals, including their purchases and diagnoses, and are increasingly published to support large-scale and low-cost studies in domains such as marketing and medicine. However, the dissemination of transaction data may lead to privacy breaches, as it allows an attacker to link an individual’s record to their identity. Approaches that anonymize data by eliminating certain values in an individual’s record or by replacing them with more general values have been proposed recently, but they often produce data of limited usefulness. This is because these approaches adopt value transformation strategies that do not guarantee data utility in intended applications and objective measures that may lead to excessive data distortion. In this paper, we propose a novel approach for anonymizing data in a way that satisfies data publishers’ utility requirements and incurs low information loss. To achieve this, we introduce an accurate information loss measure and an effective anonymization algorithm that explores a large part of the problem space. An extensive experimental study, using click-stream and medical data, demonstrates that our approach permits many times more accurate query answering than the state-of-the-art methods, while it is comparable to them in terms of efficiency. PMID:22563145