Next Generation P-Band Planetary Synthetic Aperture Radar

NASA Technical Reports Server (NTRS)

Rincon, Rafael; Carter, Lynn; Lu, Dee Pong Daniel

2016-01-01

The Space Exploration Synthetic Aperture Radar (SESAR) is an advanced P-band beamforming radar instrument concept to enable a new class of observations suitable to meet Decadal Survey science goals for planetary exploration. The radar operates at full polarimetry and fine (meter scale) resolution, and achieves beam agility through programmable waveform generation and digital beamforming. The radar architecture employs a novel low power, lightweight design approach to meet stringent planetary instrument requirements. This instrument concept has the potential to provide unprecedented surface and near- subsurface measurements applicable to multiple DecadalSurvey Science Goals.

Next Generation P-Band Planetary Synthetic Aperture Radar

NASA Technical Reports Server (NTRS)

Rincon, Rafael; Carter, Lynn; Lu, Dee Pong Daniel

2017-01-01

The Space Exploration Synthetic Aperture Radar (SESAR) is an advanced P-band beamforming radar instrument concept to enable a new class of observations suitable to meet Decadal Survey science goals for planetary exploration. The radar operates at full polarimetry and fine (meter scale) resolution, and achieves beam agility through programmable waveform generation and digital beamforming. The radar architecture employs a novel low power, lightweight design approach to meet stringent planetary instrument requirements. This instrument concept has the potential to provide unprecedented surface and near- subsurface measurements applicable to multiple Decadal Survey Science Goals.

Post launch performance of the Meteor-3/TOMS instrument

NASA Technical Reports Server (NTRS)

Jaross, Glen; Ahmad, Zia; Cebula, Richard P.; Krueger, Arlin J.

1994-01-01

The Meteor-3/TOMS instrument is the second in a series of Total Ozone Mapping Spectrometers (TOMS) following the 1978 launch of Nimbus-7/TOMS. TOMS instruments are designed to measure total ozone amounts over the entire earth on a daily basis, and have been the cornerstone of ozone trend monitoring. Consequently, calibration is a critical issue, and is receiving much attention on both instruments. Performance and calibration data obtained by monitoring systems aboard the Meteor-3 instrument have been analyzed through the first full year of operation, and indicate that the instrument is performing quite well. A new system for monitoring instrument sensitivity employing multiple diffusers has been used successfully and is providing encouraging results. The 3-diffuser system has monitored changes in instrument sensitivity of a few percent despite decreases in diffuser reflectivity approaching 50 percent since launch.

From theory to 'measurement' in complex interventions: methodological lessons from the development of an e-health normalisation instrument.

PubMed

Finch, Tracy L; Mair, Frances S; O'Donnell, Catherine; Murray, Elizabeth; May, Carl R

2012-05-17

Although empirical and theoretical understanding of processes of implementation in health care is advancing, translation of theory into structured measures that capture the complex interplay between interventions, individuals and context remain limited. This paper aimed to (1) describe the process and outcome of a project to develop a theory-based instrument for measuring implementation processes relating to e-health interventions; and (2) identify key issues and methodological challenges for advancing work in this field. A 30-item instrument (Technology Adoption Readiness Scale (TARS)) for measuring normalisation processes in the context of e-health service interventions was developed on the basis on Normalization Process Theory (NPT). NPT focuses on how new practices become routinely embedded within social contexts. The instrument was pre-tested in two health care settings in which e-health (electronic facilitation of healthcare decision-making and practice) was used by health care professionals. The developed instrument was pre-tested in two professional samples (N=46; N=231). Ratings of items representing normalisation 'processes' were significantly related to staff members' perceptions of whether or not e-health had become 'routine'. Key methodological challenges are discussed in relation to: translating multi-component theoretical constructs into simple questions; developing and choosing appropriate outcome measures; conducting multiple-stakeholder assessments; instrument and question framing; and more general issues for instrument development in practice contexts. To develop theory-derived measures of implementation process for progressing research in this field, four key recommendations are made relating to (1) greater attention to underlying theoretical assumptions and extent of translation work required; (2) the need for appropriate but flexible approaches to outcomes measurement; (3) representation of multiple perspectives and collaborative nature of work; and (4) emphasis on generic measurement approaches that can be flexibly tailored to particular contexts of study.

Flight Experiment Investigation of General Aviation Self-Separation and Sequencing Tasks

NASA Technical Reports Server (NTRS)

Murdoch, Jennifer L.; Ramiscal, Ermin R.; McNabb, Jennifer L.; Bussink, Frank J. L.

2005-01-01

A new flight operations concept called Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) was developed to increase capacity during Instrument Meteorological Conditions (IMC) at non-towered, non-radar airports by enabling concurrent operations of multiple aircraft. One aspect of this concept involves having pilots safely self-separate from other aircraft during approaches into these airports using appropriate SATS HVO procedures. A flight experiment was conducted to determine if instrument-rated general aviation (GA) pilots could self-separate and sequence their ownship aircraft, while following a simulated aircraft, into a non-towered, non-radar airport during simulated IMC. Six GA pilots' workload levels and abilities to perform self-separation and sequencing procedures while flying a global positioning system (GPS) instrument approach procedure were examined. The results showed that the evaluation pilots maintained at least the minimum specified separation between their ownship aircraft and simulated traffic and maintained their assigned landing sequence 100-percent of the time. Neither flight path deviations nor subjective workload assessments were negatively impacted by the additional tasks of self-separating and sequencing during these instrument approaches.

Single-Command Approach and Instrument Placement by a Robot on a Target

NASA Technical Reports Server (NTRS)

Huntsberger, Terrance; Cheng, Yang

2005-01-01

AUTOAPPROACH is a computer program that enables a mobile robot to approach a target autonomously, starting from a distance of as much as 10 m, in response to a single command. AUTOAPPROACH is used in conjunction with (1) software that analyzes images acquired by stereoscopic cameras aboard the robot and (2) navigation and path-planning software that utilizes odometer readings along with the output of the image-analysis software. Intended originally for application to an instrumented, wheeled robot (rover) in scientific exploration of Mars, AUTOAPPROACH could be adapted to terrestrial applications, notably including the robotic removal of land mines and other unexploded ordnance. A human operator generates the approach command by selecting the target in images acquired by the robot cameras. The approach path consists of multiple legs. Feature points are derived from images that contain the target and are thereafter tracked to correct odometric errors and iteratively refine estimates of the position and orientation of the robot relative to the target on successive legs. The approach is terminated when the robot attains the position and orientation required for placing a scientific instrument at the target. The workspace of the robot arm is then autonomously checked for self/terrain collisions prior to the deployment of the scientific instrument onto the target.

What Is Instrumented Learning? Part 1

ERIC Educational Resources Information Center

Blake, Robert; Mouton, Jane

1972-01-01

Although article is directed specifically towards improving sales techniques through self evaluation, it discusses various autoinstructional aids that could be applied to other fields. These include self-ranking against an objectives" grid, forced and multiple choice quizzes and the sentence-completion approach. (PD)

System and process for pulsed multiple reaction monitoring

DOEpatents

Belov, Mikhail E

2013-05-17

A new pulsed multiple reaction monitoring process and system are disclosed that uses a pulsed ion injection mode for use in conjunction with triple-quadrupole instruments. The pulsed injection mode approach reduces background ion noise at the detector, increases amplitude of the ion signal, and includes a unity duty cycle that provides a significant sensitivity increase for reliable quantitation of proteins/peptides present at attomole levels in highly complex biological mixtures.

Management of major vascular injury during pedicle screw instrumentation of thoracolumbar spine.

PubMed

Mirza, Aleem K; Alvi, Mohammed Ali; Naylor, Ryan M; Kerezoudis, Panagiotis; Krauss, William E; Clarke, Michelle J; Shepherd, Daniel L; Nassr, Ahmad; DeMartino, Randall R; Bydon, Mohamad

2017-12-01

Vascular injury is a rare complication of spinal instrumentation. Presentation can vary from immediate hemorrhage to pseudoaneurysm formation. In the literature, surgical approach to repair has varied based on anatomy, acuity of diagnosis, infection, and available technology. In this manuscript, we aim to describe our institutional experience with vascular injuries in thoraco-lumbar spine surgery. We report our institutional experience of three cases of vascular injury secondary to pedicle screw misplacement and their management, as well as a review of the literature. The first case had a history of previous instrumentation and presented with back pain and fever. The patient was taken for instrumentation exploration via a posterior approach. Aortic violation was discovered at T6 intraoperatively during instrumentation removal and the patient underwent emergent endovascular repair. The second case presented with chronic back pain after multiple prior posterior fusions and CT angiogram showing screw perforation on the aorta at T10. The patient underwent elective endovascular repair with synchronous removal of the instrumentation. The third case presented with radicular leg pain 6 months after L4-S1 posterior lumbar interbody fusion, with CT scan demonstrating the left S1 screw abutting the L5 nerve root and common iliac vein. The patient underwent elective instrumentation revision with intraoperative venography. Major vascular injury is a known complication of spinal surgery, especially if it involves instrumentation with pedicle screws. Treatment approach has evolved with the advancement of endovascular technology; however, open surgery remains an option when anatomy or infection is prohibitive. In the elective setting, preoperative planning with attention to surgical approach, positioning, and contingencies, should occur in a multidisciplinary fashion. Repair with an aortic stent-graft cuff may minimize unnecessary coverage of the descending thoracic aorta and intercostal arteries. Copyright © 2017 Elsevier B.V. All rights reserved.

A Review of Calibration Transfer Practices and Instrument Differences in Spectroscopy.

PubMed

Workman, Jerome J

2018-03-01

Calibration transfer for use with spectroscopic instruments, particularly for near-infrared, infrared, and Raman analysis, has been the subject of multiple articles, research papers, book chapters, and technical reviews. There has been a myriad of approaches published and claims made for resolving the problems associated with transferring calibrations; however, the capability of attaining identical results over time from two or more instruments using an identical calibration still eludes technologists. Calibration transfer, in a precise definition, refers to a series of analytical approaches or chemometric techniques used to attempt to apply a single spectral database, and the calibration model developed using that database, for two or more instruments, with statistically retained accuracy and precision. Ideally, one would develop a single calibration for any particular application, and move it indiscriminately across instruments and achieve identical analysis or prediction results. There are many technical aspects involved in such precision calibration transfer, related to the measuring instrument reproducibility and repeatability, the reference chemical values used for the calibration, the multivariate mathematics used for calibration, and sample presentation repeatability and reproducibility. Ideally, a multivariate model developed on a single instrument would provide a statistically identical analysis when used on other instruments following transfer. This paper reviews common calibration transfer techniques, mostly related to instrument differences, and the mathematics of the uncertainty between instruments when making spectroscopic measurements of identical samples. It does not specifically address calibration maintenance or reference laboratory differences.

Motofit - integrating neutron reflectometry acquisition, reduction and analysis into one, easy to use, package

NASA Astrophysics Data System (ADS)

Nelson, Andrew

2010-11-01

The efficient use of complex neutron scattering instruments is often hindered by the complex nature of their operating software. This complexity exists at each experimental step: data acquisition, reduction and analysis, with each step being as important as the previous. For example, whilst command line interfaces are powerful at automated acquisition they often reduce accessibility by novice users and sometimes reduce the efficiency for advanced users. One solution to this is the development of a graphical user interface which allows the user to operate the instrument by a simple and intuitive "push button" approach. This approach was taken by the Motofit software package for analysis of multiple contrast reflectometry data. Here we describe the extension of this package to cover the data acquisition and reduction steps for the Platypus time-of-flight neutron reflectometer. Consequently, the complete operation of an instrument is integrated into a single, easy to use, program, leading to efficient instrument usage.

NOTES performed using multiple ports of entry: Current experience and potential implications for urologic applications.

PubMed

Lima, Estevao; Rolanda, Carla; Correia-Pinto, Jorge

2009-05-01

An isolated transgastric port raises serious limitations in performing natural orifice translumenal endoscopic surgery (NOTES) complex procedures in the urology field. In an attempt to overcome these limitations, several solutions has been advanced, such as the hybrid approach (adding a single abdominal port access) or the pure NOTES combined approach (joining multiple natural orifice ports). To review the current state of experimental and clinical results of multiple ports in NOTES, a literature search of PubMed was performed, seeking publications from January 2002 to 2008 on NOTES. In addition, we looked at pertinent abstracts of annual meetings of the American Urological Association, the European Association of Urology, and the World Congress of Endourology from 2007. Multiple ports of entry seem to be necessary, mainly for moderately complex procedures. Thus, we could find studies using the hybrid approach (combination of transgastric or transvaginal access with a single transabdominal port), or using the pure NOTES combined approach (transgastric and transvesical, transvaginal and transcolonic, or transgastric and transvaginal). There is still limited experience in humans using these approaches, and no comparative studies exist to date. It is predictable that for moderately complex procedures, we will need multiple ports, so the transvaginal-transabdominal (hybrid) approach is the most appealing, whereas in a pure NOTES perspective, the transgastric-transvesical approach seems to be the preferred approach. We are waiting for new equipment and instruments that are more appropriate for these novel techniques.

Successful short-segment instrumentation and fusion for thoracolumbar spine fractures: a consecutive 41/2-year series.

PubMed

Parker, J W; Lane, J R; Karaikovic, E E; Gaines, R W

2000-05-01

A retrospective review of all the surgically managed spinal fractures at the University of Missouri Medical Center during the 41/2-year period from January 1989 to July 1993 was performed. Of the 51 surgically managed patients, 46 were instrumented by short-segment technique (attachment of one level above the fracture to one level below the fracture). The other 5 patients in this consecutive series had multiple trauma. These patients were included in the review because this was a consecutive series. However, they were grouped separately because they were instrumented by long-segment technique because of their multiple organ system injuries. The choice of the anterior or posterior approach for short-segment instrumentation was based on the Load-Sharing Classification published in a 1994 issue of Spine. The purpose of this review was to demonstrate that grading comminution by use of the Load-Sharing Classification for approach selection and the choice of patients with isolated fractures who are cooperative with spinal bracing for 4 months provide the keys to successful short-segment treatment of isolated spinal fractures. The current literature implies that the use of pedicle screws for short-segment instrumentation of spinal fracture is dangerous and inappropriate because of the high screw fracture rate. Charts, operative notes, preoperative and postoperative radiographs, computed tomography scans, and follow-up records of all patients were reviewed carefully from the time of surgery until final follow-up assessment. The Load-Sharing Classification had been used prospectively for all patients before their surgery to determine the approach for short-segment instrumentation. Denis' Pain Scale and Work Scales were obtained during follow-up evaluation for all patients. All patients were observed over 40 months except for 1 patient who died of unrelated causes after 35 months. The mean follow-up period was 66 months (51/2 years). No patient was lost to follow-up evaluation. Prospective application of the Load-Sharing Classification to the patients' injury and restriction of the short-segment approach to cooperative patients with isolated spinal fractures (excluding multisystem trauma patients) allowed 45 of 46 patients instrumented by the short-segment technique to proceed to successful healing in virtual anatomic alignment. The Load-Sharing Classification is a straightforward way to describe the amount of bony comminution in a spinal fracture. When applied to patients with isolated spine fractures who are cooperative with 3 to 4 months of spinal bracing, it can help the surgeon select short-segment pedicle-screw-based fixation using the posterior approach for less comminuted injuries and the anterior approach for those more comminuted. The choice of which fracture-dislocations should be strut grafted anteriorly and which need only posterior short-segment pedicle-screw-based instrumentation also can be made using the Load-Sharing Classification.

Managing multiple roles: development of the Work-Family Conciliation Strategies Scale.

PubMed

Matias, Marisa; Fontaine, Anne Marie

2014-07-17

Juggling the demands of work and family is becoming increasingly difficult in today's world. As dual-earners are now a majority and men and women's roles in both the workplace and at home have changed, questions have been raised regarding how individuals and couples can balance family and work. Nevertheless, research addressing work-family conciliation strategies is limited to a conflict-driven approach and context-specific instruments are scarce. This study develops an instrument for assessing how dual-earners manage their multiple roles detaching from a conflict point of view highlighting the work-family conciliation strategies put forward by these couples. Through qualitative and quantitative procedures the Work-Family Conciliation Strategies Scales was developed and is composed by 5 factors: Couple Coping; Positive Attitude Towards Multiple Roles, Planning and Management Skills, Professional Adjustments and Institutional Support; with good adjustment [χ2/df = 1.22; CFI = .90, RMSEA = .04, SRMR = .08.] and good reliability coefficients [from .67 to .87]. The developed scale contributes to research because of its specificity to the work-family framework and its focus on the proactive nature of balancing work and family roles. The results support further use of this instrument.

Combining data visualization and statistical approaches for interpreting measurements and meta-data: Integrating heatmaps, variable clustering, and mixed regression models

EPA Science Inventory

The advent of new higher throughput analytical instrumentation has put a strain on interpreting and explaining the results from complex studies. Contemporary human, environmental, and biomonitoring data sets are comprised of tens or hundreds of analytes, multiple repeat measures...

Behavioral Scale Reliability and Measurement Invariance Evaluation Using Latent Variable Modeling

ERIC Educational Resources Information Center

Raykov, Tenko

2004-01-01

A latent variable modeling approach to reliability and measurement invariance evaluation for multiple-component measuring instruments is outlined. An initial discussion deals with the limitations of coefficient alpha, a frequently used index of composite reliability. A widely and readily applicable structural modeling framework is next described…

Data Integration Approaches to Longitudinal Growth Modeling

ERIC Educational Resources Information Center

Marcoulides, Katerina M.; Grimm, Kevin J.

2017-01-01

Synthesizing results from multiple studies is a daunting task during which researchers must tackle a variety of challenges. The task is even more demanding when studying developmental processes longitudinally and when different instruments are used to measure constructs. Data integration methodology is an emerging field that enables researchers to…

A Probabilistic Model of Cross-Categorization

ERIC Educational Resources Information Center

Shafto, Patrick; Kemp, Charles; Mansinghka, Vikash; Tenenbaum, Joshua B.

2011-01-01

Most natural domains can be represented in multiple ways: we can categorize foods in terms of their nutritional content or social role, animals in terms of their taxonomic groupings or their ecological niches, and musical instruments in terms of their taxonomic categories or social uses. Previous approaches to modeling human categorization have…

Creativity in the Early Childhood Classroom: Perspectives of Preservice Teachers

ERIC Educational Resources Information Center

Eckhoff, Angela

2011-01-01

This study examined how preservice teachers view the nature and role of creativity in light of the complexities of contemporary early childhood classrooms. A multiple methods approach was utilized and data were collected with the Questionnaire Examining Student Teachers' Beliefs about Creativity (Diakidoy & Kanari, 1999) survey instrument and…

Back on Track: Approaches to Managing Highly Disruptive School Classes

ERIC Educational Resources Information Center

Vaaland, Grete S.

2017-01-01

Teaching and learning are at stake when classrooms become highly disruptive and pupils ignore the teacher's instructions and leadership. Re-establishing teacher authority in a highly disruptive school class is an understudied area. This instrumental multiple case study aimed to reveal concepts and conceptual frameworks that are suitable for…

Meta-Analysis of Scale Reliability Using Latent Variable Modeling

ERIC Educational Resources Information Center

Raykov, Tenko; Marcoulides, George A.

2013-01-01

A latent variable modeling approach is outlined that can be used for meta-analysis of reliability coefficients of multicomponent measuring instruments. Important limitations of efforts to combine composite reliability findings across multiple studies are initially pointed out. A reliability synthesis procedure is discussed that is based on…

Power and the objectification of social targets.

PubMed

Gruenfeld, Deborah H; Inesi, M Ena; Magee, Joe C; Galinsky, Adam D

2008-07-01

Objectification has been defined historically as a process of subjugation whereby people, like objects, are treated as means to an end. The authors hypothesized that objectification is a response to social power that involves approaching useful social targets regardless of the value of their other human qualities. Six studies found that under conditions of power, approach toward a social target was driven more by the target's usefulness, defined in terms of the perceiver's goals, than in low-power and baseline conditions. This instrumental response to power, which was linked to the presence of an active goal, was observed using multiple instantiations of power, different measures of approach, a variety of goals, and several types of instrumental and noninstrumental target attributes. Implications for research on the psychology of power, automatic goal pursuit, and self-objectification theory are discussed.

Detecting opportunities for parallel observations on the Hubble Space Telescope

NASA Technical Reports Server (NTRS)

Lucks, Michael

1992-01-01

The presence of multiple scientific instruments aboard the Hubble Space Telescope provides opportunities for parallel science, i.e., the simultaneous use of different instruments for different observations. Determining whether candidate observations are suitable for parallel execution depends on numerous criteria (some involving quantitative tradeoffs) that may change frequently. A knowledge based approach is presented for constructing a scoring function to rank candidate pairs of observations for parallel science. In the Parallel Observation Matching System (POMS), spacecraft knowledge and schedulers' preferences are represented using a uniform set of mappings, or knowledge functions. Assessment of parallel science opportunities is achieved via composition of the knowledge functions in a prescribed manner. The knowledge acquisition, and explanation facilities of the system are presented. The methodology is applicable to many other multiple criteria assessment problems.

Format Effects of Empirically Derived Multiple-Choice versus Free-Response Instruments When Assessing Graphing Abilities

ERIC Educational Resources Information Center

Berg, Craig; Boote, Stacy

2017-01-01

Prior graphing research has demonstrated that clinical interviews and free-response instruments produce very different results than multiple-choice instruments, indicating potential validity problems when using multiple-choice instruments to assess graphing skills (Berg & Smith in "Science Education," 78(6), 527-554, 1994). Extending…

Extending the SBUV MOD Ozone Profile data record with OMPS Nadir Profiler Data: Updated Trends and Uncertainties

NASA Astrophysics Data System (ADS)

Frith, S. M.; Stolarski, R. S.; McPeters, R. D.; Kramarova, N. A.

2017-12-01

The Ozone Monitoring and Profile Suite (OMPS) on the Suomi NPP satellite comprises three instruments measuring profile and total column ozone. The Nadir Profiler sensor measures broadly-resolved vertical ozone profiles retrieved from backscattered UV radiances, and continues a nearly unbroken record of measurements from the Solar Backscatter Ultraviolet (SBUV and SBUV/2) series of instruments dating back to late 1978. The SBUV Merged Ozone Dataset (MOD) combines data from the SBUV instrument series into a single coherent data record. The last instrument in the series, operating on the NOAA 19 satellite, is expected to encounter higher measurement uncertainties as the N19 orbit drifts closer to the terminator, necessitating a move to the next generation OMPS instruments. Here we incorporate OMPS NP v2.3 data from 2012-2017 into the MOD record and evaluate the effects of the new data on theoverall record, particularly the sensitivity of long-term trend estimates derived from MOD. We will evaluate the uncertainty associated with merging multiple records. We use a Monte Carlo modeling approach to estimate the potential for uncertainties in the calibration and drift of individual instruments to mimic long-term variations in the merged data set. Intra-instrument comparisons during overlap periods are used to quantify the uncertainty of each instrument in the Monte Carlo simulations. Current error estimates using this approach are likely conservative because we model a Gaussian distribution of potential offsets and drifts when the actual distributions are more complicated. In this work we will investigate the effects of the additional data set, but also pursue approaches to define the Monte Carlo model more precisely to better characterize the potential error.

Instrumentation issues in implementation science.

PubMed

Martinez, Ruben G; Lewis, Cara C; Weiner, Bryan J

2014-09-04

Like many new fields, implementation science has become vulnerable to instrumentation issues that potentially threaten the strength of the developing knowledge base. For instance, many implementation studies report findings based on instruments that do not have established psychometric properties. This article aims to review six pressing instrumentation issues, discuss the impact of these issues on the field, and provide practical recommendations. This debate centers on the impact of the following instrumentation issues: use of frameworks, theories, and models; role of psychometric properties; use of 'home-grown' and adapted instruments; choosing the most appropriate evaluation method and approach; practicality; and need for decision-making tools. Practical recommendations include: use of consensus definitions for key implementation constructs; reporting standards (e.g., regarding psychometrics, instrument adaptation); when to use multiple forms of observation and mixed methods; and accessing instrument repositories and decision aid tools. This debate provides an overview of six key instrumentation issues and offers several courses of action to limit the impact of these issues on the field. With careful attention to these issues, the field of implementation science can potentially move forward at the rapid pace that is respectfully demanded by community stakeholders.

Progressive and Regressive Aspects of Information Technology in Society: A Third Sector Perspective

ERIC Educational Resources Information Center

Miller, Kandace R.

2009-01-01

This dissertation explores the impact of information technology on progressive and regressive values in society from the perspective of one international foundation and four of its technology-related programs. Through a critical interpretive approach employing an instrumental multiple-case method, a framework to help explain the influence of…

The Value of Adopting Multiple Approaches and Methodologies in the Investigation of Ethnolinguistic Vitality

ERIC Educational Resources Information Center

McEntee-Atalianis, Lisa J.

2011-01-01

The concept of "Ethnolinguistic Vitality" (EV) has received variable acceptance and support since its introduction by Giles, Bourhis, and Taylor. It has especially proven to be a valuable heuristic in studies of language maintenance and shift. However, the reliability and validity of the instruments used to investigate EV, especially…

Force sensing of multiple-DOF cable-driven instruments for minimally invasive robotic surgery.

PubMed

He, Chao; Wang, Shuxin; Sang, Hongqiang; Li, Jinhua; Zhang, Linan

2014-09-01

Force sensing for robotic surgery is limited by the size of the instrument, friction and sterilization requirements. This paper presents a force-sensing instrument to avoid these restrictions. Operating forces were calculated according to cable tension. Mathematical models of the force-sensing system were established. A force-sensing instrument was designed and fabricated. A signal collection and processing system was constructed. The presented approach can avoid the constraints of space limits, sterilization requirements and friction introduced by the transmission parts behind the instrument wrist. Test results showed that the developed instrument has a 0.03 N signal noise, a 0.05 N drift, a 0.04 N resolution and a maximum error of 0.4 N. The validation experiment indicated that the operating and grasping forces can be effectively sensed. The developed force-sensing system can be used in minimally invasive robotic surgery to construct a force-feedback system. Copyright © 2013 John Wiley & Sons, Ltd.

Systematic review and meta-analysis of the performance of clinical risk assessment instruments for screening for osteoporosis or low bone density

PubMed Central

Edwards, D. L.; Saleh, A. A.; Greenspan, S. L.

2015-01-01

Summary We performed a systematic review and meta-analysis of the performance of clinical risk assessment instruments for screening for DXA-determined osteoporosis or low bone density. Commonly evaluated risk instruments showed high sensitivity approaching or exceeding 90 % at particular thresholds within various populations but low specificity at thresholds required for high sensitivity. Simpler instruments, such as OST, generally performed as well as or better than more complex instruments. Introduction The purpose of the study is to systematically review the performance of clinical risk assessment instruments for screening for dual-energy X-ray absorptiometry (DXA)-determined osteoporosis or low bone density. Methods Systematic review and meta-analysis were performed. Multiple literature sources were searched, and data extracted and analyzed from included references. Results One hundred eight references met inclusion criteria. Studies assessed many instruments in 34 countries, most commonly the Osteoporosis Self-Assessment Tool (OST), the Simple Calculated Osteoporosis Risk Estimation (SCORE) instrument, the Osteoporosis Self-Assessment Tool for Asians (OSTA), the Osteoporosis Risk Assessment Instrument (ORAI), and body weight criteria. Meta-analyses of studies evaluating OST using a cutoff threshold of <1 to identify US postmenopausal women with osteoporosis at the femoral neck provided summary sensitivity and specificity estimates of 89 % (95%CI 82–96 %) and 41 % (95%CI 23–59 %), respectively. Meta-analyses of studies evaluating OST using a cutoff threshold of 3 to identify US men with osteoporosis at the femoral neck, total hip, or lumbar spine provided summary sensitivity and specificity estimates of 88 % (95%CI 79–97 %) and 55 % (95%CI 42–68 %), respectively. Frequently evaluated instruments each had thresholds and populations for which sensitivity for osteoporosis or low bone mass detection approached or exceeded 90 % but always with a trade-off of relatively low specificity. Conclusions Commonly evaluated clinical risk assessment instruments each showed high sensitivity approaching or exceeding 90 % for identifying individuals with DXA-determined osteoporosis or low BMD at certain thresholds in different populations but low specificity at thresholds required for high sensitivity. Simpler instruments, such as OST, generally performed as well as or better than more complex instruments. PMID:25644147

Erythropoietin-Stimulating Agents and Survival in End-Stage Renal Disease: Comparison of Payment Policy Analysis, Instrumental Variables, and Multiple Imputation of Potential Outcomes

PubMed Central

Dore, David D.; Swaminathan, Shailender; Gutman, Roee; Trivedi, Amal N.; Mor, Vincent

2013-01-01

Objective To compare the assumptions and estimands across three approaches to estimating the effect of erythropoietin-stimulating agents (ESAs) on mortality. Study Design and Setting Using data from the Renal Management Information System, we conducted two analyses utilizing a change to bundled payment that we hypothesized mimicked random assignment to ESA (pre-post, difference-in-difference, and instrumental variable analyses). A third analysis was based on multiply imputing potential outcomes using propensity scores. Results There were 311,087 recipients of ESAs and 13,095 non-recipients. In the pre-post comparison, we identified no clear relationship between bundled payment (measured by calendar time) and the incidence of death within six months (risk difference -1.5%; 95% CI - 7.0% to 4.0%). In the instrumental variable analysis, the risk of mortality was similar among ESA recipients (risk difference -0.9%; 95% CI -2.1 to 0.3). In the multiple imputation analysis, we observed a 4.2% (95% CI 3.4% to 4.9%) absolute reduction in mortality risk with use of ESAs, but closer to the null for patients with baseline hematocrit >36%. Conclusion Methods emanating from different disciplines often rely on different assumptions, but can be informative about a similar causal contrast. The implications of these distinct approaches are discussed. PMID:23849152

In-Flight Performance of the Ozone Monitoring Instrument

NASA Technical Reports Server (NTRS)

Schenkeveld, V.M. Erik; Jaross, Glen; Marchenko, Sergey; Haffner, David; Kleipool, Quintus L.; Rozemeijer, Nico C.; Veefkind, J. Pepijn; Levelt, Pieternel F.

2017-01-01

The Dutch-Finnish Ozone Monitoring Instrument (OMI) is an imaging spectrograph flying on NASA's EOS Aura satellite since 15 July 2004. OMI is primarily used to map trace-gas concentrations in the Earth's atmosphere, obtaining mid-resolution (0.4-0.6 nm) ultraviolet-visible (UV- VIS; 264-504 nm) spectra at multiple (30-60) simultaneous fields of view. Assessed via various approaches that include monitoring of radiances from selected ocean, land ice and cloud areas, as well as measurements of line profiles in the solar spectra, the instrument shows low optical degradation and high wavelength stability over the mission lifetime. In the regions relatively free from the slowly unraveling "row anomaly" (RA) the OMI irradiances have degraded by 3- 8 %, while radiances have changed by 1-2 %. The long-term wavelength calibration of the instrument remains stable to 0.005-0.020 nm.

An automated calibration laboratory for flight research instrumentation: Requirements and a proposed design approach

NASA Technical Reports Server (NTRS)

Oneill-Rood, Nora; Glover, Richard D.

1990-01-01

NASA's Dryden Flight Research Facility (Ames-Dryden), operates a diverse fleet of research aircraft which are heavily instrumented to provide both real time data for in-flight monitoring and recorded data for postflight analysis. Ames-Dryden's existing automated calibration (AUTOCAL) laboratory is a computerized facility which tests aircraft sensors to certify accuracy for anticipated harsh flight environments. Recently, a major AUTOCAL lab upgrade was initiated; the goal of this modernization is to enhance productivity and improve configuration management for both software and test data. The new system will have multiple testing stations employing distributed processing linked by a local area network to a centralized database. The baseline requirements for the new AUTOCAL lab and the design approach being taken for its mechanization are described.

New approaches to merging multi-sensor satellite measurements of volcanic SO2 emissions

NASA Astrophysics Data System (ADS)

Carn, S. A.; Telling, J. W.; Krotkov, N. A.

2015-12-01

As part of the NASA MEaSUREs program, we are developing a unique long-term database of volcanic sulfur dioxide (SO2) emissions for use by the scientific community, using observations from multiple satellite instruments collected since 1978. Challenges to creating such a database include assessing data continuity between multiple satellite missions and SO2 retrieval algorithms and estimating measurement uncertainties. Here, we describe the approaches that we are using to merge multi-decadal SO2 measurements from the ultraviolet (UV) Total Ozone Mapping Spectrometer (TOMS), Ozone Monitoring Instrument (OMI) and Ozone Monitoring and Profiler Suite (OMPS) sensors. A particular challenge has involved accounting for the OMI row anomaly (ORA), a data gap in OMI measurements since 2008 that partially or wholly obscures some volcanic eruption clouds, whilst still profiting from the high OMI spatial resolution and data quality, and prior OMI SO2 validation. We present a new method to substitute missing SO2 information in the ORA with near-coincident SO2 data from OMPS, providing improved estimates of eruptive volcanic SO2 emissions. The technique can also be used to assess consistency between different satellite instruments and SO2 retrieval algorithms, investigate the impact of variable sensor spatial resolution, and estimate measurement uncertainties. It is particularly effective for larger eruptions producing extensive SO2 clouds where the ORA obscures the volcanic plume in multiple contiguous orbits. Application of the technique is demonstrated using recent volcanic eruptions including the 2015 eruption of Calbuco, Chile. We also provide an update on the status of the multi-satellite long-term volcanic SO2 database (MSVOLSO2L4).

A Direct Latent Variable Modeling Based Method for Point and Interval Estimation of Coefficient Alpha

ERIC Educational Resources Information Center

Raykov, Tenko; Marcoulides, George A.

2015-01-01

A direct approach to point and interval estimation of Cronbach's coefficient alpha for multiple component measuring instruments is outlined. The procedure is based on a latent variable modeling application with widely circulated software. As a by-product, using sample data the method permits ascertaining whether the population discrepancy…

The Multiple Altimeter Beam Experimental Lidar (MABEL), an Airborne Simulator for the ICESat-2 Mission

NASA Technical Reports Server (NTRS)

McGill, Matthew; Markus, Thorsten; Scott, V. Stanley; Neumann, Thomas

2012-01-01

The Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) mission is currently under development by NASA. The primary mission of ICESat-2 will be to measure elevation changes of the Greenland and Antarctic ice sheets, document changes in sea ice thickness distribution, and derive important information about the current state of the global ice coverage. To make this important measurement, NASA is implementing a new type of satellite-based surface altimetry based on sensing of laser pulses transmitted to, and reflected from, the surface. Because the ICESat-2 measurement approach is different from that used for previous altimeter missions, a high-fidelity aircraft instrument, the Multiple Altimeter Beam Experimental Lidar (MABEL), was developed to demonstrate the measurement concept and provide verification of the ICESat-2 methodology. The MABEL instrument will serve as a prototype for the ICESat-2 mission and also provides a science tool for studies of land surface topography. This paper outlines the science objectives for the ICESat-2 mission, the current measurement concept for ICESat-2, and the instrument concept and preliminary data from MABEL.

ICESat-2 simulated data from airborne altimetery

NASA Astrophysics Data System (ADS)

Brunt, K. M.; Neumann, T.; Markus, T.; Brenner, A. C.; Barbieri, K.; Field, C.; Sirota, M.

2010-12-01

Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) is scheduled to launch in 2015 and will carry onboard the Advanced Topographic Laser Altimeter System (ATLAS), which represents a new approach to spaceborne determination of surface elevations. Specifically, the current ATLAS design is for a micropulse, multibeam, photon-counting laser altimeter with lower energy, a shorter pulse width, and a higher repetition rate relative to the Geoscience Laser Altimeter (GLAS), the instrument that was onboard ICESat. Given the new and untested technology associated with ATLAS, airborne altimetry data is necessary (1) to test the proposed ATLAS instrument geometry, (2) to validate instrument models, and (3) to assess the atmospheric effects on multibeam altimeters. We present an overview of the airborne instruments and datasets intended to address the ATLAS instrument concept, including data collected over Greenland (July 2009) using an airborne SBIR prototype 100 channel, photon-counting, terrain mapping altimeter, which addresses the first of these 3 scientific concerns. Additionally, we present the plan for further simulator data collection over vegetated and ice covered regions using Multiple Altimeter Beam Experimental Lidar (MABEL), intended to address the latter two scientific concerns. As the ICESAT-2 project is in the design phase, the particular configuration of the ATLAS instrument may change. However, we expect this work to be relevant as long as ATLAS pursues a photon-counting approach.

Proportion of general factor variance in a hierarchical multiple-component measuring instrument: a note on a confidence interval estimation procedure.

PubMed

Raykov, Tenko; Zinbarg, Richard E

2011-05-01

A confidence interval construction procedure for the proportion of explained variance by a hierarchical, general factor in a multi-component measuring instrument is outlined. The method provides point and interval estimates for the proportion of total scale score variance that is accounted for by the general factor, which could be viewed as common to all components. The approach may also be used for testing composite (one-tailed) or simple hypotheses about this proportion, and is illustrated with a pair of examples. ©2010 The British Psychological Society.

Unraveling multiple changes in complex climate time series using Bayesian inference

NASA Astrophysics Data System (ADS)

Berner, Nadine; Trauth, Martin H.; Holschneider, Matthias

2016-04-01

Change points in time series are perceived as heterogeneities in the statistical or dynamical characteristics of observations. Unraveling such transitions yields essential information for the understanding of the observed system. The precise detection and basic characterization of underlying changes is therefore of particular importance in environmental sciences. We present a kernel-based Bayesian inference approach to investigate direct as well as indirect climate observations for multiple generic transition events. In order to develop a diagnostic approach designed to capture a variety of natural processes, the basic statistical features of central tendency and dispersion are used to locally approximate a complex time series by a generic transition model. A Bayesian inversion approach is developed to robustly infer on the location and the generic patterns of such a transition. To systematically investigate time series for multiple changes occurring at different temporal scales, the Bayesian inversion is extended to a kernel-based inference approach. By introducing basic kernel measures, the kernel inference results are composed into a proxy probability to a posterior distribution of multiple transitions. Thus, based on a generic transition model a probability expression is derived that is capable to indicate multiple changes within a complex time series. We discuss the method's performance by investigating direct and indirect climate observations. The approach is applied to environmental time series (about 100 a), from the weather station in Tuscaloosa, Alabama, and confirms documented instrumentation changes. Moreover, the approach is used to investigate a set of complex terrigenous dust records from the ODP sites 659, 721/722 and 967 interpreted as climate indicators of the African region of the Plio-Pleistocene period (about 5 Ma). The detailed inference unravels multiple transitions underlying the indirect climate observations coinciding with established global climate events.

Vertical Soil Profiling Using a Galvanic Contact Resistivity Scanning Approach

PubMed Central

Pan, Luan; Adamchuk, Viacheslav I.; Prasher, Shiv; Gebbers, Robin; Taylor, Richard S.; Dabas, Michel

2014-01-01

Proximal sensing of soil electromagnetic properties is widely used to map spatial land heterogeneity. The mapping instruments use galvanic contact, capacitive coupling or electromagnetic induction. Regardless of the type of instrument, the geometrical configuration between signal transmitting and receiving elements typically defines the shape of the depth response function. To assess vertical soil profiles, many modern instruments use multiple transmitter-receiver pairs. Alternatively, vertical electrical sounding can be used to measure changes in apparent soil electrical conductivity with depth at a specific location. This paper examines the possibility for the assessment of soil profiles using a dynamic surface galvanic contact resistivity scanning approach, with transmitting and receiving electrodes configured in an equatorial dipole-dipole array. An automated scanner system was developed and tested in agricultural fields with different soil profiles. While operating in the field, the distance between current injecting and measuring pairs of rolling electrodes was varied continuously from 40 to 190 cm. The preliminary evaluation included a comparison of scan results from 20 locations to shallow (less than 1.2 m deep) soil profiles and to a two-layer soil profile model defined using an electromagnetic induction instrument. PMID:25057135

Developing instruments concerning scientific epistemic beliefs and goal orientations in learning science: a validation study

NASA Astrophysics Data System (ADS)

Lin, Tzung-Jin; Tsai, Chin-Chung

2017-11-01

The purpose of this study was to develop and validate two survey instruments to evaluate high school students' scientific epistemic beliefs and goal orientations in learning science. The initial relationships between the sampled students' scientific epistemic beliefs and goal orientations in learning science were also investigated. A final valid sample of 600 volunteer Taiwanese high school students participated in this survey by responding to the Scientific Epistemic Beliefs Instrument (SEBI) and the Goal Orientations in Learning Science Instrument (GOLSI). Through both exploratory and confirmatory factor analyses, the SEBI and GOLSI were proven to be valid and reliable for assessing the participants' scientific epistemic beliefs and goal orientations in learning science. The path analysis results indicated that, by and large, the students with more sophisticated epistemic beliefs in various dimensions such as Development of Knowledge, Justification for Knowing, and Purpose of Knowing tended to adopt both Mastery-approach and Mastery-avoidance goals. Some interesting results were also found. For example, the students tended to set a learning goal to outperform others or merely demonstrate competence (Performance-approach) if they had more informed epistemic beliefs in the dimensions of Multiplicity of Knowledge, Uncertainty of Knowledge, and Purpose of Knowing.

High-Speed Monitoring of Multiple Grid-Connected Photovoltaic Array Configurations and Supplementary Weather Station.

PubMed

Boyd, Matthew T

2017-06-01

Three grid-connected monocrystalline silicon photovoltaic arrays have been instrumented with research-grade sensors on the Gaithersburg, MD campus of the National Institute of Standards and Technology (NIST). These arrays range from 73 kW to 271 kW and have different tilts, orientations, and configurations. Irradiance, temperature, wind, and electrical measurements at the arrays are recorded, and images are taken of the arrays to monitor shading and capture any anomalies. A weather station has also been constructed that includes research-grade instrumentation to measure all standard meteorological quantities plus additional solar irradiance spectral bands, full spectrum curves, and directional components using multiple irradiance sensor technologies. Reference photovoltaic (PV) modules are also monitored to provide comprehensive baseline measurements for the PV arrays. Images of the whole sky are captured, along with images of the instrumentation and reference modules to document any obstructions or anomalies. Nearly, all measurements at the arrays and weather station are sampled and saved every 1s, with monitoring having started on Aug. 1, 2014. This report describes the instrumentation approach used to monitor the performance of these photovoltaic systems, measure the meteorological quantities, and acquire the images for use in PV performance and weather monitoring and computer model validation.

High-Speed Monitoring of Multiple Grid-Connected Photovoltaic Array Configurations and Supplementary Weather Station

PubMed Central

Boyd, Matthew T.

2017-01-01

Three grid-connected monocrystalline silicon photovoltaic arrays have been instrumented with research-grade sensors on the Gaithersburg, MD campus of the National Institute of Standards and Technology (NIST). These arrays range from 73 kW to 271 kW and have different tilts, orientations, and configurations. Irradiance, temperature, wind, and electrical measurements at the arrays are recorded, and images are taken of the arrays to monitor shading and capture any anomalies. A weather station has also been constructed that includes research-grade instrumentation to measure all standard meteorological quantities plus additional solar irradiance spectral bands, full spectrum curves, and directional components using multiple irradiance sensor technologies. Reference photovoltaic (PV) modules are also monitored to provide comprehensive baseline measurements for the PV arrays. Images of the whole sky are captured, along with images of the instrumentation and reference modules to document any obstructions or anomalies. Nearly, all measurements at the arrays and weather station are sampled and saved every 1s, with monitoring having started on Aug. 1, 2014. This report describes the instrumentation approach used to monitor the performance of these photovoltaic systems, measure the meteorological quantities, and acquire the images for use in PV performance and weather monitoring and computer model validation. PMID:28670044

In-flight performance of the Ozone Monitoring Instrument

PubMed Central

Schenkeveld, V.M. Erik; Jaross, Glen; Marchenko, Sergey; Haffner, David; Kleipool, Quintus L.; Rozemeijer, Nico C.; Veefkind, J. Pepijn; Levelt, Pieternel F.

2018-01-01

The Dutch-Finnish Ozone Monitoring Instrument (OMI) is an imaging spectrograph flying on NASA’s EOS Aura satellite since July 15, 2004. OMI is primarily used to map trace gas concentrations in the Earth’s atmosphere, obtaining mid-resolution (0.4–0.6 nm) UV-VIS (264–504 nm) spectra at multiple (30–60) simultaneous fields of view. Assessed via various approaches that include monitoring of radiances from selected ocean, land, ice and cloud areas, as well as measurements of line profiles in the Solar spectra, the instrument shows low optical degradation and high wavelength stability over the mission lifetime. In the regions relatively free from the slowly unraveling ‘row anomaly’ the OMI irradiances have degraded by 3–8%, while radiances have changed by 1–2%. The long-term wavelength calibration of the instrument remains stable to 0.005–0.020 nm. PMID:29657582

On Shaft Data Acquisition System (OSDAS)

NASA Technical Reports Server (NTRS)

Pedings, Marc; DeHart, Shawn; Formby, Jason; Naumann, Charles

2012-01-01

On Shaft Data Acquisition System (OSDAS) is a rugged, compact, multiple-channel data acquisition computer system that is designed to record data from instrumentation while operating under extreme rotational centrifugal or gravitational acceleration forces. This system, which was developed for the Heritage Fuel Air Turbine Test (HFATT) program, addresses the problem of recording multiple channels of high-sample-rate data on most any rotating test article by mounting the entire acquisition computer onboard with the turbine test article. With the limited availability of slip ring wires for power and communication, OSDAS utilizes its own resources to provide independent power and amplification for each instrument. Since OSDAS utilizes standard PC technology as well as shared code interfaces with the next-generation, real-time health monitoring system (SPARTAA Scalable Parallel Architecture for Real Time Analysis and Acquisition), this system could be expanded beyond its current capabilities, such as providing advanced health monitoring capabilities for the test article. High-conductor-count slip rings are expensive to purchase and maintain, yet only provide a limited number of conductors for routing instrumentation off the article and to a stationary data acquisition system. In addition to being limited to a small number of instruments, slip rings are prone to wear quickly, and introduce noise and other undesirable characteristics to the signal data. This led to the development of a system capable of recording high-density instrumentation, at high sample rates, on the test article itself, all while under extreme rotational stress. OSDAS is a fully functional PC-based system with 48 channels of 24-bit, high-sample-rate input channels, phase synchronized, with an onboard storage capacity of over 1/2-terabyte of solid-state storage. This recording system takes a novel approach to the problem of recording multiple channels of instrumentation, integrated with the test article itself, packaged in a compact/rugged form factor, consuming limited power, all while rotating at high turbine speeds.

The Small Aircraft Transportation System Higher Volume Operations (SATS HVO) Flight Experiment

NASA Technical Reports Server (NTRS)

Williams, Daniel M.; Murdoch, Jennifer L.; Adams, Catherine H.

2005-01-01

This paper provides a summary of conclusions from the Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) Flight Experiment which NASA conducted to determine pilot acceptability of the HVO concept for normal conditions. The SATS HVO concept improves efficiency at non-towered, non-radar airports in Instrument Meteorological Conditions (IMC) while achieving a level of safety equal to today s system. Reported are results from flight experiment data that indicate that the SATS HVO concept is viable. The success of the SATS HVO concept is based on acceptable pilot workload, performance, and subjective criteria when compared to the procedural control operations in use today at non-towered, non-radar controlled airfields in IMC. The HVO Flight Experiment, flown on NASA's Cirrus SR22, used a subset of the HVO Simulation Experiment scenarios and evaluation pilots in order to validate the simulation experiment results. HVO and Baseline (today s system) scenarios flown included: single aircraft arriving for a GPS non-precision approach; aircraft arriving for the approach with multiple traffic aircraft; and aircraft arriving for the approach with multiple traffic aircraft and then conducting a missed approach. Results reveal that all twelve low-time instrument-rated pilots preferred SATS HVO when compared to current procedural separation operations. These pilots also flew the HVO procedures safely and proficiently without additional workload in comparison to today s system (Baseline). Detailed results of pilot flight technical error, and their subjective assessments of workload and situation awareness are presented in this paper.

Case studies for observation planning algorithm of a Japanese spaceborne sensor: Hyperspectral Imager Suite (HISUI)

NASA Astrophysics Data System (ADS)

Ogawa, Kenta; Konno, Yukiko; Yamamoto, Satoru; Matsunaga, Tsuneo; Tachikawa, Tetsushi; Komoda, Mako; Kashimura, Osamu; Rokugawa, Shuichi

2016-10-01

Hyperspectral Imager Suite (HISUI)[1] is a Japanese future spaceborne hyperspectral instrument being developed by Ministry of Economy, Trade, and Industry (METI) and will be delivered to ISS in 2018. In HISUI project, observation strategy is important especially for hyperspectral sensor, and relationship between the limitations of sensor operation and the planned observation scenarios have to be studied. We have developed concept of multiple algorithms approach. The concept is to use two (or more) algorithm models (Long Strip Model and Score Downfall Model) for selecting observing scenes from complex data acquisition requests with satisfactory of sensor constrains. We have tested the algorithm, and found that the performance of two models depends on remaining data acquisition requests, i.e. distribution score along with orbits. We conclude that the multiple algorithms approach will be make better collection plans for HISUI comparing with single fixed approach.

Multiple curved descending approaches and the air traffic control problem

NASA Technical Reports Server (NTRS)

Hart, S. G.; Mcpherson, D.; Kreifeldt, J.; Wemple, T. E.

1977-01-01

A terminal area air traffic control simulation was designed to study ways of accommodating increased air traffic density. The concepts that were investigated assumed the availability of the microwave landing system and data link and included: (1) multiple curved descending final approaches; (2) parallel runways certified for independent and simultaneous operation under IFR conditions; (3) closer spacing between successive aircraft; and (4) a distributed management system between the air and ground. Three groups each consisting of three pilots and two air traffic controllers flew a combined total of 350 approaches. Piloted simulators were supplied with computer generated traffic situation displays and flight instruments. The controllers were supplied with a terminal area map and digital status information. Pilots and controllers also reported that the distributed management procedure was somewhat more safe and orderly than the centralized management procedure. Flying precision increased as the amount of turn required to intersect the outer mark decreased. Pilots reported that they preferred the alternative of multiple curved descending approaches with wider spacing between aircraft to closer spacing on single, straight in finals while controllers preferred the latter option. Both pilots and controllers felt that parallel runways are an acceptable way to accommodate increased traffic density safely and expeditiously.

Quantitative Proteomics via High Resolution MS Quantification: Capabilities and Limitations

PubMed Central

Higgs, Richard E.; Butler, Jon P.; Han, Bomie; Knierman, Michael D.

2013-01-01

Recent improvements in the mass accuracy and resolution of mass spectrometers have led to renewed interest in label-free quantification using data from the primary mass spectrum (MS1) acquired from data-dependent proteomics experiments. The capacity for higher specificity quantification of peptides from samples enriched for proteins of biological interest offers distinct advantages for hypothesis generating experiments relative to immunoassay detection methods or prespecified peptide ions measured by multiple reaction monitoring (MRM) approaches. Here we describe an evaluation of different methods to post-process peptide level quantification information to support protein level inference. We characterize the methods by examining their ability to recover a known dilution of a standard protein in background matrices of varying complexity. Additionally, the MS1 quantification results are compared to a standard, targeted, MRM approach on the same samples under equivalent instrument conditions. We show the existence of multiple peptides with MS1 quantification sensitivity similar to the best MRM peptides for each of the background matrices studied. Based on these results we provide recommendations on preferred approaches to leveraging quantitative measurements of multiple peptides to improve protein level inference. PMID:23710359

Evaluation of satellites and remote sensors for atmospheric pollution measurements

NASA Technical Reports Server (NTRS)

Carmichael, J.; Eldridge, R.; Friedman, E.; Keitz, E.

1976-01-01

An approach to the development of a prioritized list of scientific goals in atmospheric research is provided. The results of the analysis are used to estimate the contribution of various spacecraft/remote sensor combinations for each of several important constituents of the stratosphere. The evaluation of the combinations includes both single-instrument and multiple-instrument payloads. Attention was turned to the physical and chemical features of the atmosphere as well as the performance capability of a number of atmospheric remote sensors. In addition, various orbit considerations were reviewed along with detailed information on stratospheric aerosols and the impact of spacecraft environment on the operation of the sensors.

Individual differences in bodily freezing predict emotional biases in decision making

PubMed Central

Ly, Verena; Huys, Quentin J. M.; Stins, John F.; Roelofs, Karin; Cools, Roshan

2014-01-01

Instrumental decision making has long been argued to be vulnerable to emotional responses. Literature on multiple decision making systems suggests that this emotional biasing might reflect effects of a system that regulates innately specified, evolutionarily preprogrammed responses. To test this hypothesis directly, we investigated whether effects of emotional faces on instrumental action can be predicted by effects of emotional faces on bodily freezing, an innately specified response to aversive relative to appetitive cues. We tested 43 women using a novel emotional decision making task combined with posturography, which involves a force platform to detect small oscillations of the body to accurately quantify postural control in upright stance. On the platform, participants learned whole body approach-avoidance actions based on monetary feedback, while being primed by emotional faces (angry/happy). Our data evidence an emotional biasing of instrumental action. Thus, angry relative to happy faces slowed instrumental approach relative to avoidance responses. Critically, individual differences in this emotional biasing effect were predicted by individual differences in bodily freezing. This result suggests that emotional biasing of instrumental action involves interaction with a system that controls innately specified responses. Furthermore, our findings help bridge (animal and human) decision making and emotion research to advance our mechanistic understanding of decision making anomalies in daily encounters as well as in a wide range of psychopathology. PMID:25071491

Management of neurosurgical instruments and patients exposed to Creutzfeldt-Jakob disease.

PubMed

Belay, Ermias D; Blase, Jennifer; Sehulster, Lynne M; Maddox, Ryan A; Schonberger, Lawrence B

2013-12-01

To summarize the approaches used to manage exposure of patients to inadequately sterilized neurosurgical instruments contaminated as a result of Creutzfeldt-Jakob disease (CJD). Information on past CJD exposure incidents reported to the Centers for Disease Control and Prevention (CDC) was aggregated and summarized. In addition, inactivation studies were reviewed, and data from selected publications were provided for reference. Nineteen incidents of patient exposure to potentially CJD-contaminated instruments were reported to the CDC, including 17 that involved intracranial procedures and 2 that involved ophthalmologic procedures. In more than 50% of incidents, the neurosurgical procedures were performed for diagnostic work up of the index patients. At least 12 of the hospitals had multiple neurosurgical sets, and the CJD-contaminated instruments could not be identified in 11 of 19 hospitals. In 12 of 15 hospitals with neurosurgical incidents, a decision was made to notify patients of their potential exposure. Neurosurgical instruments used for treatment of patients with suspected or diagnosed CJD or patients whose diagnosis is unclear should be promptly identified and sterilized using recommended CJD decontamination protocols. Inability to trace instruments complicates appropriate management of exposure incidents. The feasibility of instituting instrument tracking procedures should be considered.

Management of Neurosurgical Instruments and Patients Exposed to Creutzfeldt-Jakob Disease

PubMed Central

Belay, Ermias D.; Blase, Jennifer; Sehulster, Lynne M.; Maddox, Ryan A.; Schonberger, Lawrence B.

2015-01-01

OBJECTIVE To summarize the approaches used to manage exposure of patients to inadequately sterilized neurosurgical instruments contaminated as a result of Creutzfeldt-Jakob disease (CJD). METHODS Information on past CJD exposure incidents reported to the Centers for Disease Control and Prevention (CDC) was aggregated and summarized. In addition, inactivation studies were reviewed, and data from selected publications were provided for reference. RESULTS Nineteen incidents of patient exposure to potentially CJD-contaminated instruments were reported to the CDC, including 17 that involved intracranial procedures and 2 that involved ophthalmologic procedures. In more than 50% of incidents, the neurosurgical procedures were performed for diagnostic work up of the index patients. At least 12 of the hospitals had multiple neurosurgical sets, and the CJD-contaminated instruments could not be identified in 11 of 19 hospitals. In 12 of 15 hospitals with neurosurgical incidents, a decision was made to notify patients of their potential exposure. CONCLUSIONS Neurosurgical instruments used for treatment of patients with suspected or diagnosed CJD or patients whose diagnosis is unclear should be promptiy identified and sterilized using recommended CJD decontamination protocols. Inability to trace instruments complicates appropriate management of exposure incidents. The feasibility of instituting instrument tracking procedures should be considered. PMID:24225612

Objectively combining AR5 instrumental period and paleoclimate climate sensitivity evidence

NASA Astrophysics Data System (ADS)

Lewis, Nicholas; Grünwald, Peter

2018-03-01

Combining instrumental period evidence regarding equilibrium climate sensitivity with largely independent paleoclimate proxy evidence should enable a more constrained sensitivity estimate to be obtained. Previous, subjective Bayesian approaches involved selection of a prior probability distribution reflecting the investigators' beliefs about climate sensitivity. Here a recently developed approach employing two different statistical methods—objective Bayesian and frequentist likelihood-ratio—is used to combine instrumental period and paleoclimate evidence based on data presented and assessments made in the IPCC Fifth Assessment Report. Probabilistic estimates from each source of evidence are represented by posterior probability density functions (PDFs) of physically-appropriate form that can be uniquely factored into a likelihood function and a noninformative prior distribution. The three-parameter form is shown accurately to fit a wide range of estimated climate sensitivity PDFs. The likelihood functions relating to the probabilistic estimates from the two sources are multiplicatively combined and a prior is derived that is noninformative for inference from the combined evidence. A posterior PDF that incorporates the evidence from both sources is produced using a single-step approach, which avoids the order-dependency that would arise if Bayesian updating were used. Results are compared with an alternative approach using the frequentist signed root likelihood ratio method. Results from these two methods are effectively identical, and provide a 5-95% range for climate sensitivity of 1.1-4.05 K (median 1.87 K).

Commentary on "Theory-Led Design of Instruments and Representations in Learning Analytics: Developing a Novel Tool for Orchestration of Online Collaborative Learning"

ERIC Educational Resources Information Center

Teplovs, Chris

2015-01-01

This commentary reflects on the contributions to learning analytics and theory by a paper that describes how multiple theoretical frameworks were woven together to inform the creation of a new, automated discourse analysis tool. The commentary highlights the contributions of the original paper, provides some alternative approaches, and touches on…

Quality of life and patient preferences: identification of subgroups of multiple sclerosis patients.

PubMed

Rosato, Rosalba; Testa, Silvia; Oggero, Alessandra; Molinengo, Giorgia; Bertolotto, Antonio

2015-09-01

The aim of this study was to estimate preferences related to quality of life attributes in people with multiple sclerosis, by keeping heterogeneity of patient preference in mind, using the latent class approach. A discrete choice experiment survey was developed using the following attributes: activities of daily living, instrumental activities of daily living, pain/fatigue, anxiety/depression and attention/concentration. Choice sets were presented as pairs of hypothetical health status, based upon a fractional factorial design. The latent class logit model estimated on 152 patients identified three subpopulations, which, respectively, attached more importance to: (1) the physical dimension; (2) pain/fatigue and anxiety/depression; and (3) instrumental activities of daily living impairments, anxiety/depression and attention/concentration. A posterior analysis suggests that the latent class membership may be related to an individual's age to some extent, or to diagnosis and treatment, while apart from energy dimension, no significant difference exists between latent groups, with regard to Multiple Sclerosis Quality of Life-54 scales. A quality of life preference-based utility measure for people with multiple sclerosis was developed. These utility values allow identification of a hierarchic priority among different aspects of quality of life and may allow physicians to develop a care programme tailored to patient needs.

Simple Approaches to Minimally-Instrumented, Microfluidic-Based Point-of-Care Nucleic Acid Amplification Tests

PubMed Central

Mauk, Michael G.; Song, Jinzhao; Liu, Changchun; Bau, Haim H.

2018-01-01

Designs and applications of microfluidics-based devices for molecular diagnostics (Nucleic Acid Amplification Tests, NAATs) in infectious disease testing are reviewed, with emphasis on minimally instrumented, point-of-care (POC) tests for resource-limited settings. Microfluidic cartridges (‘chips’) that combine solid-phase nucleic acid extraction; isothermal enzymatic nucleic acid amplification; pre-stored, paraffin-encapsulated lyophilized reagents; and real-time or endpoint optical detection are described. These chips can be used with a companion module for separating plasma from blood through a combined sedimentation-filtration effect. Three reporter types: Fluorescence, colorimetric dyes, and bioluminescence; and a new paradigm for end-point detection based on a diffusion-reaction column are compared. Multiplexing (parallel amplification and detection of multiple targets) is demonstrated. Low-cost detection and added functionality (data analysis, control, communication) can be realized using a cellphone platform with the chip. Some related and similar-purposed approaches by others are surveyed. PMID:29495424

Superpixel-based structure classification for laparoscopic surgery

NASA Astrophysics Data System (ADS)

Bodenstedt, Sebastian; Görtler, Jochen; Wagner, Martin; Kenngott, Hannes; Müller-Stich, Beat Peter; Dillmann, Rüdiger; Speidel, Stefanie

2016-03-01

Minimally-invasive interventions offers multiple benefits for patients, but also entails drawbacks for the surgeon. The goal of context-aware assistance systems is to alleviate some of these difficulties. Localizing and identifying anatomical structures, maligned tissue and surgical instruments through endoscopic image analysis is paramount for an assistance system, making online measurements and augmented reality visualizations possible. Furthermore, such information can be used to assess the progress of an intervention, hereby allowing for a context-aware assistance. In this work, we present an approach for such an analysis. First, a given laparoscopic image is divided into groups of connected pixels, so-called superpixels, using the SEEDS algorithm. The content of a given superpixel is then described using information regarding its color and texture. Using a Random Forest classifier, we determine the class label of each superpixel. We evaluated our approach on a publicly available dataset for laparoscopic instrument detection and achieved a DICE score of 0.69.

[Laparoscopic single patient use instruments: expensive outsourcing of product quality?].

PubMed

von Eiff, W; Ziegenbein, R

2000-01-01

The supply of medical goods is an important critical success factor in German hospitals. One major managerial area in the procurement concerns the decision between single patient use (SPU) and multiple patient use (MPU) products. Especially laparoscopic instruments which are generally expensive are a field of interest for decision makers. Due to a lack of quantifiable factors describing the two different forms of supply alternatives with their effects on effectivity and efficiency of the procurement process and the final use are often not taken into account. Since it is expected that in the future more and more laparoscopic instruments will be needed there is a necessity for finding a concept allowing the identification of the "right" product. The Center for Hospital Management (CKM) has the aim to develop a corresponding approach but needs the help of the reader.

Extreme Ultraviolet Variability Experiment (EVE) Multiple EUV Grating Spectrographs (MEGS): Radiometric Calibrations and Results

NASA Technical Reports Server (NTRS)

Hock, R. A.; Woods, T. N.; Crotser, D.; Eparvier, F. G.; Woodraska, D. L.; Chamberlin, P. C.; Woods, E. C.

2010-01-01

The NASA Solar Dynamics Observatory (SDO), scheduled for launch in early 2010, incorporates a suite of instruments including the Extreme Ultraviolet Variability Experiment (EVE). EVE has multiple instruments including the Multiple Extreme ultraviolet Grating Spectrographs (MEGS) A, B, and P instruments, the Solar Aspect Monitor (SAM), and the Extreme ultraviolet SpectroPhotometer (ESP). The radiometric calibration of EVE, necessary to convert the instrument counts to physical units, was performed at the National Institute of Standards and Technology (NIST) Synchrotron Ultraviolet Radiation Facility (SURF III) located in Gaithersburg, Maryland. This paper presents the results and derived accuracy of this radiometric calibration for the MEGS A, B, P, and SAM instruments, while the calibration of the ESP instrument is addressed by Didkovsky et al. . In addition, solar measurements that were taken on 14 April 2008, during the NASA 36.240 sounding-rocket flight, are shown for the prototype EVE instruments.

Editorial Introduction: Lunar Reconnaissance Orbiter, Part II

NASA Technical Reports Server (NTRS)

Petro, Noah E.; Keller, John W.; Gaddis, Lisa R.

2016-01-01

The Lunar Reconnaissance Orbiter (LRO) mission has shifted our understanding of the history of the Moon. The seven instruments on LRO each have contributed to creating new paradigms for the evolution of the Moon by providing unprecedented measurements of the surface, subsurface, and lunar environment. In this second volume of the LRO Special Issue, we present 21 papers from a broad range of the areas of investigation from LRO, from the volatile inventory, to the shape of the Moon's surface, to its rich volcanic history, and the interactions between the lunar surface and the space environment. These themes provide rich science for the instrument teams, as well as for the broader science com- munity who continue to use the LRO data in their research. Each paper uses publicly available data from one or more instruments on LRO, illustrating the value of a robust spacecraft. For example, the production of high-resolution topographic data products from the LRO Camera Narrow Angle Camera (Henriksen et al., pp. 122-137, this issue) rely on the accurate geodetic grid produced by the LOLA instrument (Mao et al., pp. 55-69, this issue; Smith et al., pp. 70-91, this issue). Additionally, analysis of LRO data coupled with other spacecraft data, such as LADEE (Hurley et al., pp. 31-37, this issue) and GRAIL (e.g., Jozwiak et al., pp. 224-231, this issue) illustrate the utility of merging not only data from multiple instruments, but also multiple orbital platforms. These synergistic studies show the value of the inter-team approach adopted by the LRO mission. This second volume represents the culmination of an extensive effort to highlight the high-quality science still being produced by the LRO instrument teams, even after more than seven years in orbit at the Moon.

TEMPO-Assisted Free Radical-Initiated Peptide Sequencing Mass Spectrometry (FRIPS MS) in Q-TOF and Orbitrap Mass Spectrometers: Single-Step Peptide Backbone Dissociations in Positive Ion Mode

NASA Astrophysics Data System (ADS)

Jang, Inae; Lee, Sun Young; Hwangbo, Song; Kang, Dukjin; Lee, Hookeun; Kim, Hugh I.; Moon, Bongjin; Oh, Han Bin

2017-01-01

The present study demonstrates that one-step peptide backbone fragmentations can be achieved using the TEMPO [2-(2,2,6,6-tetramethyl piperidine-1-oxyl)]-assisted free radical-initiated peptide sequencing (FRIPS) mass spectrometry in a hybrid quadrupole time-of-flight (Q-TOF) mass spectrometer and a Q-Exactive Orbitrap instrument in positive ion mode, in contrast to two-step peptide fragmentation in an ion-trap mass spectrometer (reference Anal. Chem. 85, 7044-7051 (30)). In the hybrid Q-TOF and Q-Exactive instruments, higher collisional energies can be applied to the target peptides, compared with the low collisional energies applied by the ion-trap instrument. The higher energy deposition and the additional multiple collisions in the collision cell in both instruments appear to result in one-step peptide backbone dissociations in positive ion mode. This new finding clearly demonstrates that the TEMPO-assisted FRIPS approach is a very useful tool in peptide mass spectrometry research.

The PEACE project review of clinical instruments for hospice and palliative care.

PubMed

Hanson, Laura C; Scheunemann, Leslie P; Zimmerman, Sheryl; Rokoske, Franziska S; Schenck, Anna P

2010-10-01

Hospice and palliative care organizations are expanding their use of standardized instruments and other approaches to measure quality. We undertook a systematic review and evaluation of published patient-level instruments for potential application in hospice and palliative care clinical quality measurement. We searched prior reviews and computerized reference databases from 1990 through February 2007 for studies of instruments relevant to physical, psychological, social, cultural, spiritual, or ethical aspects of palliative care, or measuring prognosis, function or continuity of care. Publications were selected for full review if they provided evidence of psychometric properties or practical application of an instrument tested in or appropriate for a hospice or palliative care population. Selected instruments were evaluated and scored for scientific soundness and potential application in clinical quality measurement. The search found 1427 publications, with 229 selected for full manuscript review. Manuscripts provided information on 129 instruments which were evaluated using a structured scoring guide for psychometric properties. Thirty-nine instruments scoring near or above the 75th percentile were recommended. Most instruments covered multiple domains or focused on care for physical symptoms, psychological or social aspects of care. Few instruments were available to measure cultural aspects of care, structure and process of care, and continuity of care. Numerous patient-level instruments are available to measure physical, psychological and social aspects of palliative care with adequate evidence for scientific soundness and practical clinical use for quality improvement and research. Other aspects of palliative care may benefit from further instrument development research.

An improved pseudotargeted metabolomics approach using multiple ion monitoring with time-staggered ion lists based on ultra-high performance liquid chromatography/quadrupole time-of-flight mass spectrometry.

PubMed

Wang, Yang; Liu, Fang; Li, Peng; He, Chengwei; Wang, Ruibing; Su, Huanxing; Wan, Jian-Bo

2016-07-13

Pseudotargeted metabolomics is a novel strategy integrating the advantages of both untargeted and targeted methods. The conventional pseudotargeted metabolomics required two MS instruments, i.e., ultra-high performance liquid chromatography/quadrupole-time- of-flight mass spectrometry (UHPLC/Q-TOF MS) and UHPLC/triple quadrupole mass spectrometry (UHPLC/QQQ-MS), which makes method transformation inevitable. Furthermore, the picking of ion pairs from thousands of candidates and the swapping of the data between two instruments are the most labor-intensive steps, which greatly limit its application in metabolomic analysis. In the present study, we proposed an improved pseudotargeted metabolomics method that could be achieved on an UHPLC/Q-TOF/MS instrument operated in the multiple ion monitoring (MIM) mode with time-staggered ion lists (tsMIM). Full scan-based untargeted analysis was applied to extract the target ions. After peak alignment and ion fusion, a stepwise ion picking procedure was used to generate the ion lists for subsequent single MIM and tsMIM. The UHPLC/Q-TOF tsMIM MS-based pseudotargeted approach exhibited better repeatability and a wider linear range than the UHPLC/Q-TOF MS-based untargeted metabolomics method. Compared to the single MIM mode, the tsMIM significantly increased the coverage of the metabolites detected. The newly developed method was successfully applied to discover plasma biomarkers for alcohol-induced liver injury in mice, which indicated its practicability and great potential in future metabolomics studies. Copyright © 2016 Elsevier B.V. All rights reserved.

Progress in the Development of Practical Remote Detection of Icing Conditions

NASA Technical Reports Server (NTRS)

Reehorst, Andrew; Politovich, Marcia K.; Zednik, Stephan; Isaac, George A.; Cober, Stewart

2006-01-01

The NASA Icing Remote Sensing System (NIRSS) has been under definition and development at NASA Glenn Research Center since 1997. The goal of this development activity is to produce and demonstrate the required sensing and data processing technologies required to accurately remotely detect and measure icing conditions aloft. As part of that effort NASA has teamed with NCAR to develop software to fuse data from multiple instruments into a single detected icing condition product. The multiple instrument approach utilizes a X-band vertical staring radar, a multifrequency microwave, and a lidar ceilometer. The radar data determine cloud boundaries, the radiometer determines the sub-freezing temperature heights and total liquid water content, and the ceilometer refines the lower cloud boundary. Data is post-processed with a LabVIEW program with a resultant supercooled liquid water profile and aircraft hazard depiction. Ground-based, remotely-sensed measurements and in-situ measurements from research aircraft were gathered during the international 2003-2004 Alliance Icing Research Study (AIRS II). Comparisons between the remote sensing system s fused icing product and the aircraft measurements are reviewed here. While there are areas where improvement can be made, the cases examined suggest that the fused sensor remote sensing technique appears to be a valid approach.

Elucidating empowerment in El Proyecto Bienestar (the Well-Being Project).

PubMed

Postma, Julie

2008-05-01

This paper describes differences in how socioculturally diverse participants in one community-based participatory research project negotiated 'empowerment', and the implications of those differences for nurses involved in farmworker health and safety efforts. Internationally, empowerment and community participation are increasingly being used as strategies to reduce health disparities. Theories of empowerment vary in the academic literature and their connotations vary across cultures. Study participants were part of El Proyecto Bienestar, a community-based participatory research (CBPR) project whose aim was to identify and respond to occupational and environmental health threats in one Mexican-American farmworker community in the United States of America. Participant observation was used to audiorecord 18 participants in the third year (2006) of this 4-year project discussing future project activities. Discourse analysis was used to analyse the transcripts. While participants agreed that 'empowerment' was central to the project, they had different perspectives on what the term meant and the role that the project should play in empowering the farmworker community. Empowerment discourses positioned the project in three ways: (1) as an instrument used to strengthen farmworkers' collective political voice, (2) as an instrument used to represent multiple community interests and (3) as an instrument used to advocate on behalf of farmworkers. Individuals used multiple discourses signifying the complexity in participants' roles and obligations. Balancing power and developing knowledge collaboratively requires understanding multiple approaches to empowerment. Community empowerment as an outcome should not come at the expense of individual empowerment as part of the CBPR process.

The WHO 2016 verbal autopsy instrument: An international standard suitable for automated analysis by InterVA, InSilicoVA, and Tariff 2.0

PubMed Central

Chandramohan, Daniel; Clark, Samuel J.; Jakob, Robert; Leitao, Jordana; Rao, Chalapati; Riley, Ian; Setel, Philip W.

2018-01-01

Background Verbal autopsy (VA) is a practical method for determining probable causes of death at the population level in places where systems for medical certification of cause of death are weak. VA methods suitable for use in routine settings, such as civil registration and vital statistics (CRVS) systems, have developed rapidly in the last decade. These developments have been part of a growing global momentum to strengthen CRVS systems in low-income countries. With this momentum have come pressure for continued research and development of VA methods and the need for a single standard VA instrument on which multiple automated diagnostic methods can be developed. Methods and findings In 2016, partners harmonized a WHO VA standard instrument that fully incorporates the indicators necessary to run currently available automated diagnostic algorithms. The WHO 2016 VA instrument, together with validated approaches to analyzing VA data, offers countries solutions to improving information about patterns of cause-specific mortality. This VA instrument offers the opportunity to harmonize the automated diagnostic algorithms in the future. Conclusions Despite all improvements in design and technology, VA is only recommended where medical certification of cause of death is not possible. The method can nevertheless provide sufficient information to guide public health priorities in communities in which physician certification of deaths is largely unavailable. The WHO 2016 VA instrument, together with validated approaches to analyzing VA data, offers countries solutions to improving information about patterns of cause-specific mortality. PMID:29320495

Robust inference in summary data Mendelian randomization via the zero modal pleiotropy assumption.

PubMed

Hartwig, Fernando Pires; Davey Smith, George; Bowden, Jack

2017-12-01

Mendelian randomization (MR) is being increasingly used to strengthen causal inference in observational studies. Availability of summary data of genetic associations for a variety of phenotypes from large genome-wide association studies (GWAS) allows straightforward application of MR using summary data methods, typically in a two-sample design. In addition to the conventional inverse variance weighting (IVW) method, recently developed summary data MR methods, such as the MR-Egger and weighted median approaches, allow a relaxation of the instrumental variable assumptions. Here, a new method - the mode-based estimate (MBE) - is proposed to obtain a single causal effect estimate from multiple genetic instruments. The MBE is consistent when the largest number of similar (identical in infinite samples) individual-instrument causal effect estimates comes from valid instruments, even if the majority of instruments are invalid. We evaluate the performance of the method in simulations designed to mimic the two-sample summary data setting, and demonstrate its use by investigating the causal effect of plasma lipid fractions and urate levels on coronary heart disease risk. The MBE presented less bias and lower type-I error rates than other methods under the null in many situations. Its power to detect a causal effect was smaller compared with the IVW and weighted median methods, but was larger than that of MR-Egger regression, with sample size requirements typically smaller than those available from GWAS consortia. The MBE relaxes the instrumental variable assumptions, and should be used in combination with other approaches in sensitivity analyses. © The Author 2017. Published by Oxford University Press on behalf of the International Epidemiological Association

Multiple Subtypes among Vocationally Undecided College Students: A Model and Assessment Instrument.

ERIC Educational Resources Information Center

Jones, Lawrence K.; Chenery, Mary Faeth

1980-01-01

A model of vocational decision status was developed, and an instrument was constructed and used to assess its three dimensions. Results demonstrated the utility of the model, supported the reliability and validity of the instrument, and illustrated the value of viewing vocationally undecided students as multiple subtypes. (Author)

Feedback to Managers: A Review and Comparison of Multi-Rater Instruments for Management Development. Third Edition.

ERIC Educational Resources Information Center

Leslie, Jean Brittain; Fleenor, John W.

This volume describes 24 publicly available multiple-perspective management-assessment instruments that relate self-view to the views of others on multiple management and leadership domains. Each instrument also includes an assessment-for-development focus that scales managers along a continuum of psychometric properties, and "best…

INFORMAL CARE AND CAREGIVER’S HEALTH

PubMed Central

DO, YOUNG KYUNG; NORTON, EDWARD C.; STEARNS, SALLY C.; VAN HOUTVEN, COURTNEY HAROLD

2014-01-01

This study aims to measure the causal effect of informal caregiving on the health and health care use of women who are caregivers, using instrumental variables. We use data from South Korea, where daughters and daughters-in-law are the prevalent source of caregivers for frail elderly parents and parents-in-law. A key insight of our instrumental variable approach is that having a parent-in-law with functional limitations increases the probability of providing informal care to that parent-in-law, but a parent-in-law’s functional limitation does not directly affect the daughter-in-law’s health. We compare results for the daughter-in-law and daughter samples to check the assumption of the excludability of the instruments for the daughter sample. Our results show that providing informal care has significant adverse effects along multiple dimensions of health for daughter-in-law and daughter caregivers in South Korea. PMID:24753386

CIRiS: Compact Infrared Radiometer in Space

NASA Astrophysics Data System (ADS)

Osterman, D. P.; Collins, S.; Ferguson, J.; Good, W.; Kampe, T.; Rohrschneider, R.; Warden, R.

2016-09-01

The Compact Infrared Radiometer in Space (CIRiS) is a thermal infrared radiometric imaging instrument under development by Ball Aerospace for a Low Earth Orbit mission on a CubeSat spacecraft. Funded by the NASA Earth Science Technology Office's In-Space Validation of Earth Science Technology (InVEST) program, the mission objective is technology demonstration for improved on-orbit radiometric calibration. The CIRiS calibration approach uses a scene select mirror to direct three calibration views to the focal plane array and to transfer the resulting calibrated response to earth images. The views to deep space and two blackbody sources, including one at a selectable temperature, provide multiple options for calibration optimization. Two new technologies, carbon nanotube blackbody sources and microbolometer focal plane arrays with reduced pixel sizes, enable improved radiometric performance within the constrained 6U CubeSat volume. The CIRiS instrument's modular design facilitates subsystem modifications as required by future mission requirements. CubeSat constellations of CIRiS and derivative instruments offer an affordable approach to achieving revisit times as short as one day for diverse applications including water resource and drought management, cloud, aerosol, and dust studies, and land use and vegetation monitoring. Launch is planned for 2018.

Genetic instrumental variable regression: Explaining socioeconomic and health outcomes in nonexperimental data

PubMed Central

DiPrete, Thomas A.; Burik, Casper A. P.; Koellinger, Philipp D.

2018-01-01

Identifying causal effects in nonexperimental data is an enduring challenge. One proposed solution that recently gained popularity is the idea to use genes as instrumental variables [i.e., Mendelian randomization (MR)]. However, this approach is problematic because many variables of interest are genetically correlated, which implies the possibility that many genes could affect both the exposure and the outcome directly or via unobserved confounding factors. Thus, pleiotropic effects of genes are themselves a source of bias in nonexperimental data that would also undermine the ability of MR to correct for endogeneity bias from nongenetic sources. Here, we propose an alternative approach, genetic instrumental variable (GIV) regression, that provides estimates for the effect of an exposure on an outcome in the presence of pleiotropy. As a valuable byproduct, GIV regression also provides accurate estimates of the chip heritability of the outcome variable. GIV regression uses polygenic scores (PGSs) for the outcome of interest which can be constructed from genome-wide association study (GWAS) results. By splitting the GWAS sample for the outcome into nonoverlapping subsamples, we obtain multiple indicators of the outcome PGSs that can be used as instruments for each other and, in combination with other methods such as sibling fixed effects, can address endogeneity bias from both pleiotropy and the environment. In two empirical applications, we demonstrate that our approach produces reasonable estimates of the chip heritability of educational attainment (EA) and show that standard regression and MR provide upwardly biased estimates of the effect of body height on EA. PMID:29686100

Genetic instrumental variable regression: Explaining socioeconomic and health outcomes in nonexperimental data.

PubMed

DiPrete, Thomas A; Burik, Casper A P; Koellinger, Philipp D

2018-05-29

Identifying causal effects in nonexperimental data is an enduring challenge. One proposed solution that recently gained popularity is the idea to use genes as instrumental variables [i.e., Mendelian randomization (MR)]. However, this approach is problematic because many variables of interest are genetically correlated, which implies the possibility that many genes could affect both the exposure and the outcome directly or via unobserved confounding factors. Thus, pleiotropic effects of genes are themselves a source of bias in nonexperimental data that would also undermine the ability of MR to correct for endogeneity bias from nongenetic sources. Here, we propose an alternative approach, genetic instrumental variable (GIV) regression, that provides estimates for the effect of an exposure on an outcome in the presence of pleiotropy. As a valuable byproduct, GIV regression also provides accurate estimates of the chip heritability of the outcome variable. GIV regression uses polygenic scores (PGSs) for the outcome of interest which can be constructed from genome-wide association study (GWAS) results. By splitting the GWAS sample for the outcome into nonoverlapping subsamples, we obtain multiple indicators of the outcome PGSs that can be used as instruments for each other and, in combination with other methods such as sibling fixed effects, can address endogeneity bias from both pleiotropy and the environment. In two empirical applications, we demonstrate that our approach produces reasonable estimates of the chip heritability of educational attainment (EA) and show that standard regression and MR provide upwardly biased estimates of the effect of body height on EA. Copyright © 2018 the Author(s). Published by PNAS.

Multimodal Approach to Testing the Acute Effects of Mild Traumatic Brain Injury (mTBI)

DTIC Science & Technology

2015-03-01

included several key staff changes, a major instrument acquisition, repairs and upgrades to the MEG , combined with substantial progress with patient...patients to non-head trauma controls in the first days after injury. Multiple modalities of behavioral, electrophysiological, and most strikingly, MEG ...changes were found. The MEG of all mTBI patients had delta activity in the frontal lobes that was absent in all controls. A scientific abstract on

Vibration isolation versus vibration compensation on multiple payload platforms

NASA Technical Reports Server (NTRS)

Sirlin, S. W.

1989-01-01

There are many future science instruments with high performance pointing (sub microradian) requirements. To build a separate spacecraft for each payload is prohibitively expensive, especially as not all instruments need to be in space for a long duration. Putting multiple payloads on a single basebody that supplies power, communications, and orbit maintenance is cheaper, easier to service, and allows for the spacecraft bus to be reused as new instruments become available to replace old instruments. Once several payloads are mounted together, the articulation of one may disturb another. The situation is even more extreme when the basebody serves multiple purposes, such as space station which has construction, satellite servicing, and man motion adding to the disturbance environment. The challenge then is to maintain high performance at low cost in a multiple payload environment. The goal is to supply many future science instruments with high performance pointing (sub microradian). The options are independent spacecraft for each payload (expensive); or multiple payloads on a single basebody (cheaper, easier to service, basebody reusable for several short duration payloads). The problems are one payload can disturb another, and other activities create large disturbances (construction, satellite servicing, and man motion).

Case presentation and short perspective on management of foraminal/far lateral discs and stenosis.

PubMed

Epstein, Nancy E

2018-01-01

The management of lumbar foraminal/far lateral discs (FOR/FLD) with stenosis remains controversial. Operative choices should be based on each patient's preoperative dynamic X-ray findings, magnetic resonance (MR), and computed tomography (CT) studies. Here we reviewed several options for decompression alone vs. decompression with fusion. Safe excision of FOR/FLD with stenosis should begin at the level above the disc herniation, as identification of the superior, foraminally, and far laterally exiting nerve root is critical. Performing an undercutting laminectomy and utilizing an operating microscope usually preserves the facet joints, and in many cases, avoids the need for fusion. Other decompressive techniques include; the intertransverse (ITT), and Wiltse approaches. Fusions following complete unilateral full facetectomy may be; noninstrumented (e.g., older, osteoporotic patients) vs. instrumented (e.g., posterolateral fusion or occasionally transforaminal lumbar interbody fusion). Here we present a patient with L2-L5 stenosis, and a left L3-L4 FOR/FLD, and multiple synovial cysts who was successfully managed with an l2-L5 laminecotmy, left L34 FOR/FLD diksectomy without fusion. Postoperatively, the patient was neurologically intact, and stability was maintained. Adjunctive measures for FOR/FLD diksectomy should include; intraoperative monitoring, use of the operating microscope, and an intraoperative film with a radiopaque marker in the correct disc space to confirm the correct level of diskectomy. There are multiple approaches to the excision of FOR/FLD with stenosis. These include; decompression alone vs. decompression with non-instrumented vs. instrumented fusion. Surgical choices must be based on individual patient's X-ray, MR, and CT findings. The aim should be to maximize the safety of disc excision with decompression of stenosis, and to preserve stability, reducing the need for fusion, while minimizing morbidity.

A Unified Approach for Reporting ARM Measurement Uncertainties Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campos, E; Sisterson, Douglas

The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility is observationally based, and quantifying the uncertainty of its measurements is critically important. With over 300 widely differing instruments providing over 2,500 datastreams, concise expression of measurement uncertainty is quite challenging. The ARM Facility currently provides data and supporting metadata (information about the data or data quality) to its users through a number of sources. Because the continued success of the ARM Facility depends on the known quality of its measurements, the Facility relies on instrument mentors and the ARM Data Quality Office (DQO) to ensure, assess,more » and report measurement quality. Therefore, an easily accessible, well-articulated estimate of ARM measurement uncertainty is needed. Note that some of the instrument observations require mathematical algorithms (retrievals) to convert a measured engineering variable into a useful geophysical measurement. While those types of retrieval measurements are identified, this study does not address particular methods for retrieval uncertainty. As well, the ARM Facility also provides engineered data products, or value-added products (VAPs), based on multiple instrument measurements. This study does not include uncertainty estimates for those data products. We propose here that a total measurement uncertainty should be calculated as a function of the instrument uncertainty (calibration factors), the field uncertainty (environmental factors), and the retrieval uncertainty (algorithm factors). The study will not expand on methods for computing these uncertainties. Instead, it will focus on the practical identification, characterization, and inventory of the measurement uncertainties already available in the ARM community through the ARM instrument mentors and their ARM instrument handbooks. As a result, this study will address the first steps towards reporting ARM measurement uncertainty: 1) identifying how the uncertainty of individual ARM measurements is currently expressed, 2) identifying a consistent approach to measurement uncertainty, and then 3) reclassifying ARM instrument measurement uncertainties in a common framework.« less

Towards Omni-Tomography—Grand Fusion of Multiple Modalities for Simultaneous Interior Tomography

PubMed Central

Wang, Ge; Zhang, Jie; Gao, Hao; Weir, Victor; Yu, Hengyong; Cong, Wenxiang; Xu, Xiaochen; Shen, Haiou; Bennett, James; Furth, Mark; Wang, Yue; Vannier, Michael

2012-01-01

We recently elevated interior tomography from its origin in computed tomography (CT) to a general tomographic principle, and proved its validity for other tomographic modalities including SPECT, MRI, and others. Here we propose “omni-tomography”, a novel concept for the grand fusion of multiple tomographic modalities for simultaneous data acquisition in a region of interest (ROI). Omni-tomography can be instrumental when physiological processes under investigation are multi-dimensional, multi-scale, multi-temporal and multi-parametric. Both preclinical and clinical studies now depend on in vivo tomography, often requiring separate evaluations by different imaging modalities. Over the past decade, two approaches have been used for multimodality fusion: Software based image registration and hybrid scanners such as PET-CT, PET-MRI, and SPECT-CT among others. While there are intrinsic limitations with both approaches, the main obstacle to the seamless fusion of multiple imaging modalities has been the bulkiness of each individual imager and the conflict of their physical (especially spatial) requirements. To address this challenge, omni-tomography is now unveiled as an emerging direction for biomedical imaging and systems biomedicine. PMID:22768108

A novel approach to quantifying the spatiotemporal behavior of instrumented grey seals used to sample the environment.

PubMed

Baker, Laurie L; Mills Flemming, Joanna E; Jonsen, Ian D; Lidgard, Damian C; Iverson, Sara J; Bowen, W Don

2015-01-01

Paired with satellite location telemetry, animal-borne instruments can collect spatiotemporal data describing the animal's movement and environment at a scale relevant to its behavior. Ecologists have developed methods for identifying the area(s) used by an animal (e.g., home range) and those used most intensely (utilization distribution) based on location data. However, few have extended these models beyond their traditional roles as descriptive 2D summaries of point data. Here we demonstrate how the home range method, T-LoCoH, can be expanded to quantify collective sampling coverage by multiple instrumented animals using grey seals (Halichoerus grypus) equipped with GPS tags and acoustic transceivers on the Scotian Shelf (Atlantic Canada) as a case study. At the individual level, we illustrate how time and space-use metrics quantifying individual sampling coverage may be used to determine the rate of acoustic transmissions received. Grey seals collectively sampled an area of 11,308 km (2) and intensely sampled an area of 31 km (2) from June-December. The largest area sampled was in July (2094.56 km (2)) and the smallest area sampled occurred in August (1259.80 km (2)), with changes in sampling coverage observed through time. T-LoCoH provides an effective means to quantify changes in collective sampling effort by multiple instrumented animals and to compare these changes across time. We also illustrate how time and space-use metrics of individual instrumented seal movement calculated using T-LoCoH can be used to account for differences in the amount of time a bioprobe (biological sampling platform) spends in an area.

Integrated polymerase chain reaction/electrophoresis instrument

DOEpatents

Andresen, Brian D.

2000-01-01

A new approach and instrument for field identification of micro-organisms and DNA fragments using a small and disposable device containing integrated polymerase chain reaction (PCR) enzymatic reaction wells, attached capillary electrophoresis (CE) channels, detectors, and read-out all on/in a small hand-held package. The analysis instrument may be made inexpensively, for example, of plastic, and thus is disposable, which minimizes cross contamination and the potential for false positive identification between samples. In addition, it is designed for multiple users with individual applications. The integrated PCR/CE is manufactured by the PCR well and CE channels are "stamped" into plastic depressions where conductive coatings are made in the wells and ends of the CE microchannels to carry voltage and current to heat the PCR reaction mixtures and simultaneously draw DNA bands up the CE channels. Light is transmitted through the instrument at appropriate points and detects PCR bands and identifies DNA fragments by size (retention time) and quantifies each by the amount of light generated as each phototransistor positioned below each CE channel detects a passing band. The instrument is so compact that at least 100 PCR/CE reactions/analyses can be performed easily on one detection device.

78 FR 47047 - Proposed Policy for Discontinuance of Certain Instrument Approach Procedures

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... procedures. Localizer procedures. TACAN procedures. Standard Instrument Arrivals (STARs). Standard Instrument... Policy for Discontinuance of Certain Instrument Approach Procedures AGENCY: Federal Aviation... facilitates the introduction of area navigation (RNAV) instrument approach procedures over the past decade...

Risk factors for unavoidable removal of instrumentation after surgical site infection of spine surgery

PubMed Central

Tominaga, Hiroyuki; Setoguchi, Takao; Kawamura, Hideki; Kawamura, Ichiro; Nagano, Satoshi; Abematsu, Masahiko; Tanabe, Fumito; Ishidou, Yasuhiro; Yamamoto, Takuya; Komiya, Setsuro

2016-01-01

Abstract Surgical site infection (SSI) after spine instrumentation is difficult to treat, and often requires removal of instrumentation. The removal of instrumentation after spine surgery is a severe complication that can lead to the deterioration of activities of daily living and poor prognosis. Although there are many reports on SSI after spine surgery, few reports have investigated the risk factors for the removal of instrumentation after spine surgery SSI. This study aimed to identify the risk factors for unavoidable removal of instrumentation after SSI of spine surgery. We retrospectively reviewed 511 patients who underwent spine surgery with instrumentation at Kagoshima University Hospital from January 2006 to December 2014. Risk factors associated with SSI were analyzed via multiple logistic regression analysis. Parameters of the group that needed instrumentation removal were compared with the group that did not require instrumentation removal using the Mann–Whitney U and Fisher's exact tests. The posterior approach was used in most cases (453 of 511 cases, 88.6%). SSI occurred in 16 of 511 cases (3.14%) of spine surgery with instrumentation. Multivariate logistic regression analysis identified 2 significant risk factors for SSI: operation time, and American Society of Anesthesiologists physical status classification ≥ 3. Twelve of the 16 patients with SSI (75%) were able to keep the instrumentation after SSI. Pseudarthrosis occurred in 2 of 4 cases (50%) after instrumentation removal. Risk factors identified for instrumentation removal after spine SSI were a greater number of past surgeries, low preoperative hemoglobin, high preoperative creatinine, high postoperative infection treatment score for the spine, and the presence of methicillin-resistant Staphylococcus aureus. In these high risk cases, attempts should be made to decrease the risk factors preoperatively, and careful postoperative monitoring should be conducted. PMID:27787365

Risk factors for unavoidable removal of instrumentation after surgical site infection of spine surgery: A retrospective case-control study.

PubMed

Tominaga, Hiroyuki; Setoguchi, Takao; Kawamura, Hideki; Kawamura, Ichiro; Nagano, Satoshi; Abematsu, Masahiko; Tanabe, Fumito; Ishidou, Yasuhiro; Yamamoto, Takuya; Komiya, Setsuro

2016-10-01

Surgical site infection (SSI) after spine instrumentation is difficult to treat, and often requires removal of instrumentation. The removal of instrumentation after spine surgery is a severe complication that can lead to the deterioration of activities of daily living and poor prognosis. Although there are many reports on SSI after spine surgery, few reports have investigated the risk factors for the removal of instrumentation after spine surgery SSI. This study aimed to identify the risk factors for unavoidable removal of instrumentation after SSI of spine surgery. We retrospectively reviewed 511 patients who underwent spine surgery with instrumentation at Kagoshima University Hospital from January 2006 to December 2014. Risk factors associated with SSI were analyzed via multiple logistic regression analysis. Parameters of the group that needed instrumentation removal were compared with the group that did not require instrumentation removal using the Mann-Whitney U and Fisher's exact tests. The posterior approach was used in most cases (453 of 511 cases, 88.6%). SSI occurred in 16 of 511 cases (3.14%) of spine surgery with instrumentation. Multivariate logistic regression analysis identified 2 significant risk factors for SSI: operation time, and American Society of Anesthesiologists physical status classification ≥ 3. Twelve of the 16 patients with SSI (75%) were able to keep the instrumentation after SSI. Pseudarthrosis occurred in 2 of 4 cases (50%) after instrumentation removal. Risk factors identified for instrumentation removal after spine SSI were a greater number of past surgeries, low preoperative hemoglobin, high preoperative creatinine, high postoperative infection treatment score for the spine, and the presence of methicillin-resistant Staphylococcus aureus. In these high risk cases, attempts should be made to decrease the risk factors preoperatively, and careful postoperative monitoring should be conducted.

A new approach for instrument software at Gemini

NASA Astrophysics Data System (ADS)

Gillies, Kim; Nunez, Arturo; Dunn, Jennifer

2008-07-01

Gemini Observatory is now developing its next generation of astronomical instruments, the Aspen instruments. These new instruments are sophisticated and costly requiring large distributed, collaborative teams. Instrument software groups often include experienced team members with existing mature code. Gemini has taken its experience from the previous generation of instruments and current hardware and software technology to create an approach for developing instrument software that takes advantage of the strengths of our instrument builders and our own operations needs. This paper describes this new software approach that couples a lightweight infrastructure and software library with aspects of modern agile software development. The Gemini Planet Imager instrument project, which is currently approaching its critical design review, is used to demonstrate aspects of this approach. New facilities under development will face similar issues in the future, and the approach presented here can be applied to other projects.

CICADA -- Configurable Instrument Control and Data Acquisition

NASA Astrophysics Data System (ADS)

Young, Peter J.; Roberts, William H.; Sebo, Kim M.

CICADA (Young et al. 1997) is a multi-process, distributed application for the control of astronomical data acquisition systems. It comprises elements that control the operation of, and data flow from CCD camera systems; and the operation of telescope instrument control systems. CICADA can be used to dynamically configure support for astronomical instruments that can be made up of multiple cameras and multiple instrument controllers. Each camera is described by a hierarchy of parts that are each individually configured and linked together. Most of CICADA is written in C++ and much of the configurability of CICADA comes from the use of inheritance and polymorphism. An example of a multiple part instrument configuration -- a wide field imager (WFI) -- is described here. WFI, presently under construction, is made up of eight 2k x 4k CCDs with dual SDSU II controllers and will be used at Siding Spring's ANU 40in and AAO 3.9m telescopes.

Determination of the plutonium content in a spent fuel assembly by passive and active interrogation using a differential die-away instrument

NASA Astrophysics Data System (ADS)

Henzl, V.; Croft, S.; Richard, J.; Swinhoe, M. T.; Tobin, S. J.

2013-06-01

In this paper, we present a novel approach to estimating the total plutonium content in a spent fuel assembly (SFA) that is based on combining information from a passive measurement of the total neutron count rate (PN) of the assayed SFA and a measure of its multiplication. While PN can be measured essentially with any non-destructive assay (NDA) technique capable of neutron detection, the measure of multiplication is, in our approach, determined by means of active interrogation using an instrument based on the Differential Die-Away technique (DDA). The DDA is a NDA technique developed within the U.S. Department of Energy's Next Generation Safeguards Initiative (NGSI) project focused on the utilization of NDA techniques to determine the elemental plutonium content in commercial nuclear SFA's [1]. This approach was adopted since DDA also allows determination of other SFA characteristics, such as burnup, initial enrichment, and cooling time, and also allows for detection of certain types of diversion of nuclear material. The quantification of total plutonium is obtained using an analytical correlation function in terms of the observed PN and active multiplication. Although somewhat similar approaches relating Pu content with PN have been adopted in the past, we demonstrate by extensive simulation of the fuel irradiation and NDA process that our analytical method is independent of explicit knowledge of the initial enrichment, burnup, and an absolute value of the SFA's reactivity (i.e. multiplication factor). We show that when tested with MCNPX™ simulations comprising the 64 SFA NGSI Spent Fuel Library-1 we were able to determine elemental plutonium content, using just a few calibration parameters, with an average variation in the prediction of around 1-2% across the wide dynamic range of irradiation history parameters used, namely initial enrichment (IE=2-5%), burnup (BU=15-60 GWd/tU) and cooling time (CT=1-80 y). In this paper we describe the basic approach and the success obtained against synthetic data. We recognize that our synthetic data may not fully capture the rich behavior of actual irradiated fuel and the uncertainties of the practical measurements. However, this design study is based on a rather complete nuclide inventory and the correlations for Pu seem robust to variation of input. Thus it is concluded that the proposed method is sufficiently promising that further experimentally based work is desirable.

77 FR 54862 - Integrated Hedging Transactions of Qualifying Debt

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

... Integrated Hedging Transactions of Qualifying Debt AGENCY: Internal Revenue Service (IRS), Treasury. ACTION... certain integrated transactions that involve a foreign currency denominated debt instrument and multiple... foreign currency denominated debt instrument and multiple associated hedging transactions. The text of...

Consensus Classification Using Non-Optimized Classifiers.

PubMed

Brownfield, Brett; Lemos, Tony; Kalivas, John H

2018-04-03

Classifying samples into categories is a common problem in analytical chemistry and other fields. Classification is usually based on only one method, but numerous classifiers are available with some being complex, such as neural networks, and others are simple, such as k nearest neighbors. Regardless, most classification schemes require optimization of one or more tuning parameters for best classification accuracy, sensitivity, and specificity. A process not requiring exact selection of tuning parameter values would be useful. To improve classification, several ensemble approaches have been used in past work to combine classification results from multiple optimized single classifiers. The collection of classifications for a particular sample are then combined by a fusion process such as majority vote to form the final classification. Presented in this Article is a method to classify a sample by combining multiple classification methods without specifically classifying the sample by each method, that is, the classification methods are not optimized. The approach is demonstrated on three analytical data sets. The first is a beer authentication set with samples measured on five instruments, allowing fusion of multiple instruments by three ways. The second data set is composed of textile samples from three classes based on Raman spectra. This data set is used to demonstrate the ability to classify simultaneously with different data preprocessing strategies, thereby reducing the need to determine the ideal preprocessing method, a common prerequisite for accurate classification. The third data set contains three wine cultivars for three classes measured at 13 unique chemical and physical variables. In all cases, fusion of nonoptimized classifiers improves classification. Also presented are atypical uses of Procrustes analysis and extended inverted signal correction (EISC) for distinguishing sample similarities to respective classes.

In vivo miniature robots for natural orifice surgery: State of the art and future perspectives.

PubMed

Tiwari, Manish M; Reynoso, Jason F; Lehman, Amy C; Tsang, Albert W; Farritor, Shane M; Oleynikov, Dmitry

2010-06-27

Natural orifice translumenal endoscopic surgery (NOTES) is the integration of laparoscopic minimally invasive surgery techniques with endoscopic technology. Despite the advances in NOTES technology, the approach presents several unique instrumentation and technique-specific challenges. Current flexible endoscopy platforms for NOTES have several drawbacks including limited stability, triangulation and dexterity, and lack of adequate visualization, suggesting the need for new and improved instrumentation for this approach. Much of the current focus is on the development of flexible endoscopy platforms that incorporate robotic technology. An alternative approach to access the abdominal viscera for either a laparoscopic or NOTES procedure is the use of small robotic devices that can be implanted in an intracorporeal manner. Multiple, independent, miniature robots can be simultaneously inserted into the abdominal cavity to provide a robotic platform for NOTES surgery. The capabilities of the robots include imaging, retraction, tissue and organ manipulation, and precise maneuverability in the abdominal cavity. Such a platform affords several advantages including enhanced visualization, better surgical dexterity and improved triangulation for NOTES. This review discusses the current status and future perspectives of this novel miniature robotics platform for the NOTES approach. Although these technologies are still in pre-clinical development, a miniature robotics platform provides a unique method for addressing the limitations of minimally invasive surgery, and NOTES in particular.

Underestimation of Variance of Predicted Health Utilities Derived from Multiattribute Utility Instruments.

PubMed

Chan, Kelvin K W; Xie, Feng; Willan, Andrew R; Pullenayegum, Eleanor M

2017-04-01

Parameter uncertainty in value sets of multiattribute utility-based instruments (MAUIs) has received little attention previously. This false precision leads to underestimation of the uncertainty of the results of cost-effectiveness analyses. The aim of this study is to examine the use of multiple imputation as a method to account for this uncertainty of MAUI scoring algorithms. We fitted a Bayesian model with random effects for respondents and health states to the data from the original US EQ-5D-3L valuation study, thereby estimating the uncertainty in the EQ-5D-3L scoring algorithm. We applied these results to EQ-5D-3L data from the Commonwealth Fund (CWF) Survey for Sick Adults ( n = 3958), comparing the standard error of the estimated mean utility in the CWF population using the predictive distribution from the Bayesian mixed-effect model (i.e., incorporating parameter uncertainty in the value set) with the standard error of the estimated mean utilities based on multiple imputation and the standard error using the conventional approach of using MAUI (i.e., ignoring uncertainty in the value set). The mean utility in the CWF population based on the predictive distribution of the Bayesian model was 0.827 with a standard error (SE) of 0.011. When utilities were derived using the conventional approach, the estimated mean utility was 0.827 with an SE of 0.003, which is only 25% of the SE based on the full predictive distribution of the mixed-effect model. Using multiple imputation with 20 imputed sets, the mean utility was 0.828 with an SE of 0.011, which is similar to the SE based on the full predictive distribution. Ignoring uncertainty of the predicted health utilities derived from MAUIs could lead to substantial underestimation of the variance of mean utilities. Multiple imputation corrects for this underestimation so that the results of cost-effectiveness analyses using MAUIs can report the correct degree of uncertainty.

Lunar Atmosphere and Dust Environment Explorer Integration and Test

NASA Technical Reports Server (NTRS)

Wright, Michael R.; McCormick, John L.; Hoffman, Richard G.

2010-01-01

Integration and test (I&T) of the Lunar Atmosphere and Dust Environment Explorer (LADEE) is presented. A collaborative NASA project between Goddard Space Flight Center and Ames Research Center, LADEE's mission is to explore the low lunar orbit environment and exosphere for constituents. Its instruments include two spectrometers, a dust detector, and a laser communication technology demonstration. Although a relatively low-cost spacecraft, LADEE has I&T requirements typical of most planetary probes, such as prelaunch contamination control, sterilization, and instrument calibration. To lead to a successful mission, I&T at the spacecraft, instrument, and observatory level must include step-by-step and end-to-end functional, environmental, and performance testing. Due to its compressed development schedule, LADEE I&T planning requires adjusting test flows and sequences to account for long-lead critical-path items and limited spares. A protoflight test-level strategy is also baselined. However, the program benefits from having two independent but collaborative teams of engineers, managers, and technicians that have a wealth of flight project experience. This paper summarizes the LADEE I&T planning, flow, facilities, and probe-unique processes. Coordination of requirements and approaches to I&T when multiple organizations are involved is discussed. Also presented are cost-effective approaches to I&T that are transferable to most any spaceflight project I&T program.

From metallurgy to modelling of electrical steels: A multiple approach to their behaviour and use based on physics and experimental investigations

NASA Astrophysics Data System (ADS)

Cornut, B.; Kedous-Lebouc, A.; Waeckerlé, Th.

1996-07-01

Research on SiFe is a busy field which corresponds to the main soft magnetic materials interests of the Laboratoire d'Electrotechnique de Grenoble. Three mutually enriched areas are being explored: metallurgical research towards the production of cube textured sheets, instrumentation research allowing precise measurements of magnetic properties under extreme conditions, and models of magnetization vectorial laws or loss prediction to be included in computer aided design.

Laser scanning confocal microscopy: history, applications, and related optical sectioning techniques.

PubMed

Paddock, Stephen W; Eliceiri, Kevin W

2014-01-01

Confocal microscopy is an established light microscopical technique for imaging fluorescently labeled specimens with significant three-dimensional structure. Applications of confocal microscopy in the biomedical sciences include the imaging of the spatial distribution of macromolecules in either fixed or living cells, the automated collection of 3D data, the imaging of multiple labeled specimens and the measurement of physiological events in living cells. The laser scanning confocal microscope continues to be chosen for most routine work although a number of instruments have been developed for more specific applications. Significant improvements have been made to all areas of the confocal approach, not only to the instruments themselves, but also to the protocols of specimen preparation, to the analysis, the display, the reproduction, sharing and management of confocal images using bioinformatics techniques.

New real-time algorithms for arbitrary, high precision function generation with applications to acoustic transducer excitation

NASA Astrophysics Data System (ADS)

Gaydecki, P.

2009-07-01

A system is described for the design, downloading and execution of arbitrary functions, intended for use with acoustic and low-frequency ultrasonic transducers in condition monitoring and materials testing applications. The instrumentation comprises a software design tool and a powerful real-time digital signal processor unit, operating at 580 million multiplication-accumulations per second (MMACs). The embedded firmware employs both an established look-up table approach and a new function interpolation technique to generate the real-time signals with very high precision and flexibility. Using total harmonic distortion (THD) analysis, the purity of the waveforms have been compared with those generated using traditional analogue function generators; this analysis has confirmed that the new instrument has a consistently superior signal-to-noise ratio.

A rapid, automated approach to optimisation of multiple reaction monitoring conditions for quantitative bioanalytical mass spectrometry.

PubMed

Higton, D M

2001-01-01

An improvement to the procedure for the rapid optimisation of mass spectrometry (PROMS), for the development of multiple reaction methods (MRM) for quantitative bioanalytical liquid chromatography/tandem mass spectrometry (LC/MS/MS), is presented. PROMS is an automated protocol that uses flow-injection analysis (FIA) and AppleScripts to create methods and acquire the data for optimisation. The protocol determines the optimum orifice potential, the MRM conditions for each compound, and finally creates the MRM methods needed for sample analysis. The sensitivities of the MRM methods created by PROMS approach those created manually. MRM method development using PROMS currently takes less than three minutes per compound compared to at least fifteen minutes manually. To further enhance throughput, approaches to MRM optimisation using one injection per compound, two injections per pool of five compounds and one injection per pool of five compounds have been investigated. No significant difference in the optimised instrumental parameters for MRM methods were found between the original PROMS approach and these new methods, which are up to ten times faster. The time taken for an AppleScript to determine the optimum conditions and build the MRM methods is the same with all approaches. Copyright 2001 John Wiley & Sons, Ltd.

All for one but not one for all: how multiple number representations are recruited in one numerical task.

PubMed

Wood, Guilherme; Nuerk, Hans-Christoph; Moeller, Korbinian; Geppert, Barbara; Schnitker, Ralph; Weber, Jochen; Willmes, Klaus

2008-01-02

Number processing recruits a complex network of multiple numerical representations. Usually the components of this network are examined in a between-task approach with the disadvantage of relying upon different instructions, tasks, and inhomogeneous stimulus sets across different studies. A within-task approach may avoid these disadvantages and access involved numerical representations more specifically. In the present study we employed a within-task approach to investigate numerical representations activated in the number bisection task (NBT) using parametric rapid event-related fMRI. Participants were to judge whether the central number of a triplet was also its arithmetic mean (e.g. 23_26_29) or not (e.g. 23_25_29). Activation in the left inferior parietal cortex was associated with the deployment of arithmetic fact knowledge, while activation of the intraparietal cortex indicated more intense magnitude processing, instrumental aspects of calculation and integration of the base-10 structure of two-digit numbers. These results replicate evidence from the literature. Furthermore, activation in the dorsolateral and ventrolateral prefrontal cortex revealed mechanisms of feature monitoring and inhibition as well as allocation of cognitive resources recruited to solve a specific triplet. We conclude that the network of numerical representations should rather be studied in a within-task approach than in varying between-task approaches.

A Radar/Radiometer Instrument for Mapping Soil Moisture and Ocean Salinity

NASA Technical Reports Server (NTRS)

Hildebrand, Peter H.; Hilliard, Laurence; Rincon, Rafael; LeVine, David; Mead, James

2003-01-01

The RadSTAR instrument combines an L-band, digital beam-forming radar with an L-band synthetic aperture, thinned array (STAR) radiometer. The RadSTAR development will support NASA Earth science goals by developing a novel, L-band scatterometer/ radiometer that measures Earth surface bulk material properties (surface emissions and backscatter) as well as surface characteristics (backscatter). Present, real aperture airborne L-Band active/passive measurement systems such as the JPUPALS (Wilson, et al, 2000) provide excellent sampling characteristics, but have no scanning capabilities, and are extremely large; the huge JPUPALS horn requires a the C-130 airborne platform, operated with the aft loading door open during flight operation. The approach used for the upcoming Aquarius ocean salinity mission or the proposed Hydros soil mission use real apertures with multiple fixed beams or scanning beams. For real aperture instruments, there is no upgrade path to scanning over a broad swath, except rotation of the whole aperture, which is an approach with obvious difficulties as aperture size increases. RadSTAR will provide polarimetric scatterometer and radiometer measurements over a wide swath, in a highly space-efficient configuration. The electronic scanning approaches provided through STAR technology and digital beam forming will enable the large L-band aperture to scan efficiently over a very wide swath. RadSTAR technology development, which merges an interferometric radiometer with a digital beam forming scatterometer, is an important step in the path to space for an L-band scatterometer/radiometer. RadSTAR couples a patch array antenna with a 1.26 GHz digital beam forming radar scatterometer and a 1.4 GHz STAR radiometer to provide Earth surface backscatter and emission measurements in a compact, cross-track scanning instrument with no moving parts. This technology will provide the first L-band, emission and backscatter measurements in a compact aircraft instrument and will be ideally suited to large apertures, possibly at GEO, and could possibly be implemented on a swarm of micro-satellites. This instrument will have wide application for validation studies, and will have application for other microwave frequencies.

High-charge and multiple-star vortex coronagraphy from stacked vector vortex phase masks.

PubMed

Aleksanyan, Artur; Brasselet, Etienne

2018-02-01

Optical vortex phase masks are now installed at many ground-based large telescopes for high-contrast astronomical imaging. To date, such instrumental advances have been restricted to the use of helical phase masks of the lowest even order, while future giant telescopes will require high-order masks. Here we propose a single-stage on-axis scheme to create high-order vortex coronagraphs based on second-order vortex phase masks. By extending our approach to an off-axis design, we also explore the implementation of multiple-star vortex coronagraphy. An experimental laboratory demonstration is reported and supported by numerical simulations. These results offer a practical roadmap to the development of future coronagraphic tools with enhanced performances.

21 CFR 862.2570 - Instrumentation for clinical multiplex test systems.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Instrumentation for clinical multiplex test... Laboratory Instruments § 862.2570 Instrumentation for clinical multiplex test systems. (a) Identification. Instrumentation for clinical multiplex test systems is a device intended to measure and sort multiple signals...

21 CFR 862.2570 - Instrumentation for clinical multiplex test systems.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Instrumentation for clinical multiplex test... Laboratory Instruments § 862.2570 Instrumentation for clinical multiplex test systems. (a) Identification. Instrumentation for clinical multiplex test systems is a device intended to measure and sort multiple signals...

21 CFR 862.2570 - Instrumentation for clinical multiplex test systems.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Instrumentation for clinical multiplex test... Laboratory Instruments § 862.2570 Instrumentation for clinical multiplex test systems. (a) Identification. Instrumentation for clinical multiplex test systems is a device intended to measure and sort multiple signals...

21 CFR 862.2570 - Instrumentation for clinical multiplex test systems.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Instrumentation for clinical multiplex test... Laboratory Instruments § 862.2570 Instrumentation for clinical multiplex test systems. (a) Identification. Instrumentation for clinical multiplex test systems is a device intended to measure and sort multiple signals...

14 CFR 91.1069 - Flight crew: Instrument proficiency check requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... procedures. The instrument approach procedure or procedures must include at least one straight-in approach... conducted to published minimums for that procedure. (d) The instrument proficiency checks required by... emergencies, and standard instrument approaches involving navigational facilities which that pilot is to be...

14 CFR 91.1069 - Flight crew: Instrument proficiency check requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... procedures. The instrument approach procedure or procedures must include at least one straight-in approach... conducted to published minimums for that procedure. (d) The instrument proficiency checks required by... emergencies, and standard instrument approaches involving navigational facilities which that pilot is to be...

78 FR 32085 - Amendment of Class E Airspace; Eureka, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-29

... instrument approach procedures at the airport. This improves the safety and management of Instrument Flight... aircraft using the RNAV (GPS) standard instrument approach procedures at Eureka Airport. Class E airspace...) standard instrument approach procedures at the airport. Additional controlled airspace extending upward...

75 FR 62457 - Establishment of Class E Airspace; Port Clarence, AK

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

... airstrip and has developed a military-use instrument approach procedure. This instrument approach procedure... Class E airspace for air traffic management of Instrument Flight Rules (IFR) operations. DATES... published in the notice of proposed rulemaking. The establishment of an instrument approach procedure...

First aircraft test results of a compact, low cost hyperspectral imager for earth observation from space

NASA Astrophysics Data System (ADS)

de Goeij, B. T. G.; Otter, G. C. J.; van Wakeren, J. M. O.; Veefkind, J. P.; Vlemmix, T.; Ge, X.; Levelt, P. F.; Dirks, B. P. F.; Toet, P. M.; van der Wal, L. F.; Jansen, R.

2017-09-01

In recent years TNO has investigated and developed different innovative opto-mechanical designs to realize advanced spectrometers for space applications in a more compact and cost-effective manner. This offers multiple advantages: a compact instrument can be flown on a much smaller platform or as add-on on a larger platform; a low-cost instrument opens up the possibility to fly multiple instruments in a satellite constellation, improving both global coverage and temporal sampling (e.g. multiple overpasses per day to study diurnal processes); in this way a constellation of low-cost instruments may provide added value to the larger scientific and operational satellite missions (e.g. the Copernicus Sentinel missions); a small, lightweight spectrometer can easily be mounted on a small aircraft or high-altitude UAV (offering high spatial resolution).

A New All Solid State Approach to Gaseous Pollutant Detection

NASA Technical Reports Server (NTRS)

Brown, V.; Tamstorf, K.

1971-01-01

Recent efforts in our laboratories have concentrated on the development of an all solid state gas sensor, by combining solid electrolyte (ion exchange membrane) technology with advanced thin film deposition processes. With the proper bias magnitude and polarity these miniature electro-chemical,cells show remarkable current responses for many common pollution gases. Current activity is now focused on complementing a multiple array (matrix) of these solid state sensors, with a digital electronic scanner device possessing "scan-compare-identify-alarm: capability. This innovative approach to multi-component pollutant gas analysis may indeed be the advanced prototype for the "third generation" class of pollution analysis instrumentation so urgently needed in the decade ahead.

The Virtual Mission - A step-wise approach to large space missions

NASA Technical Reports Server (NTRS)

Hansen, Elaine; Jones, Morgan; Hooke, Adrian; Pomphrey, Richard

1992-01-01

Attention is given to the Virtual Mission (VM) concept, wherein multiple scientific instruments will be on different platforms, in different orbits, operated from different control centers, at different institutions, and reporting to different user groups. The VM concept enables NASA's science and application users to accomplish their broad science goals with a fleet made up of smaller, more focused spacecraft and to alleviate the difficulties involved with single, large, complex spacecraft. The concept makes possible the stepwise 'go-as-you-pay' extensible approach recommended by Augustine (1990). It enables scientists to mix and match the use of many smaller satellites in novel ways to respond to new scientific ideas and needs.

Utilization of the Differential Die-Away Self-Interrogation Technique for Characterization and Verification of Spent Nuclear Fuel

NASA Astrophysics Data System (ADS)

Trahan, Alexis Chanel

New nondestructive assay techniques are sought to better characterize spent nuclear fuel. One of the NDA instruments selected for possible deployment is differential die-away self-interrogation (DDSI). The proposed DDSI approach for spent fuel assembly assay utilizes primarily the spontaneous fission and (alpha, n) neutrons in the assemblies as an internal interrogating radiation source. The neutrons released in spontaneous fission or (alpha,n) reactions are thermalized in the surrounding water and induce fission in fissile isotopes, thereby creating a measurable signal from isotopes of interest that would be otherwise difficult to measure. The DDSI instrument employs neutron coincidence counting with 3He tubes and list-mode-based data acquisition to allow for production of Rossi-alpha distributions (RADs) in post-processing. The list-mode approach to data collection and subsequent construction of RADs has expanded the analytical possibilities, as will be demonstrated throughout this thesis. One of the primary advantages is that the measured signal in the form of a RAD can be analyzed in its entirety including determination of die-away times in different time domains. This capability led to the development of the early die-away method, a novel leakage multiplication determination method which is tested throughout the thesis on different sources in simulation space and fresh fuel experiments. The early die-away method is a robust, accurate, improved method of determining multiplication without the need for knowledge of the (alpha,n) source term. The DDSI technique and instrument are presented along with the many novel capabilities enabled by and discovered through RAD analysis. Among the new capabilities presented are the early die-away method, total plutonium content determination, and highly sensitive missing pin detection. Simulation of hundreds of different spent and fresh fuel assemblies were used to develop the analysis algorithms and the techniques were tested on a variety of spontaneous fission-driven fresh fuel assemblies at Los Alamos National Laboratory and the BeRP ball at the Nevada National Security Site. The development of the new, improved analysis and characterization methods with the DDSI instrument makes it a viable technique for implementation in a facility to meet material control and safeguards needs.

On Convergence of Development Costs and Cost Models for Complex Spaceflight Instrument Electronics

NASA Technical Reports Server (NTRS)

Kizhner, Semion; Patel, Umeshkumar D.; Kasa, Robert L.; Hestnes, Phyllis; Brown, Tammy; Vootukuru, Madhavi

2008-01-01

Development costs of a few recent spaceflight instrument electrical and electronics subsystems have diverged from respective heritage cost model predictions. The cost models used are Grass Roots, Price-H and Parametric Model. These cost models originated in the military and industry around 1970 and were successfully adopted and patched by NASA on a mission-by-mission basis for years. However, the complexity of new instruments recently changed rapidly by orders of magnitude. This is most obvious in the complexity of representative spaceflight instrument electronics' data system. It is now required to perform intermediate processing of digitized data apart from conventional processing of science phenomenon signals from multiple detectors. This involves on-board instrument formatting of computational operands from row data for example, images), multi-million operations per second on large volumes of data in reconfigurable hardware (in addition to processing on a general purpose imbedded or standalone instrument flight computer), as well as making decisions for on-board system adaptation and resource reconfiguration. The instrument data system is now tasked to perform more functions, such as forming packets and instrument-level data compression of more than one data stream, which are traditionally performed by the spacecraft command and data handling system. It is furthermore required that the electronics box for new complex instruments is developed for one-digit watt power consumption, small size and that it is light-weight, and delivers super-computing capabilities. The conflict between the actual development cost of newer complex instruments and its electronics components' heritage cost model predictions seems to be irreconcilable. This conflict and an approach to its resolution are addressed in this paper by determining the complexity parameters, complexity index, and their use in enhanced cost model.

Rapid optimization of MRM-MS instrument parameters by subtle alteration of precursor and product m/z targets.

PubMed

Sherwood, Carly A; Eastham, Ashley; Lee, Lik Wee; Risler, Jenni; Mirzaei, Hamid; Falkner, Jayson A; Martin, Daniel B

2009-07-01

Multiple reaction monitoring (MRM) is a highly sensitive method of targeted mass spectrometry (MS) that can be used to selectively detect and quantify peptides based on the screening of specified precursor peptide-to-fragment ion transitions. MRM-MS sensitivity depends critically on the tuning of instrument parameters, such as collision energy and cone voltage, for the generation of maximal product ion signal. Although generalized equations and values exist for such instrument parameters, there is no clear indication that optimal signal can be reliably produced for all types of MRM transitions using such an algorithmic approach. To address this issue, we have devised a workflow functional on both Waters Quattro Premier and ABI 4000 QTRAP triple quadrupole instruments that allows rapid determination of the optimal value of any programmable instrument parameter for each MRM transition. Here, we demonstrate the strategy for the optimizations of collision energy and cone voltage, but the method could be applied to other instrument parameters, such as declustering potential, as well. The workflow makes use of the incremental adjustment of the precursor and product m/z values at the hundredth decimal place to create a series of MRM targets at different collision energies that can be cycled through in rapid succession within a single run, avoiding any run-to-run variability in execution or comparison. Results are easily visualized and quantified using the MRM software package Mr. M to determine the optimal instrument parameters for each transition.

Rapid Optimization of MRM-MS Instrument Parameters by Subtle Alteration of Precursor and Product m/z Targets

PubMed Central

Sherwood, Carly A.; Eastham, Ashley; Lee, Lik Wee; Risler, Jenni; Mirzaei, Hamid; Falkner, Jayson A.; Martin, Daniel B.

2009-01-01

Multiple reaction monitoring (MRM) is a highly sensitive method of targeted mass spectrometry (MS) that can be used to selectively detect and quantify peptides based on the screening of specified precursor peptide-to-fragment ion transitions. MRM-MS sensitivity depends critically on the tuning of instrument parameters, such as collision energy and cone voltage, for the generation of maximal product ion signal. Although generalized equations and values exist for such instrument parameters, there is no clear indication that optimal signal can be reliably produced for all types of MRM transitions using such an algorithmic approach. To address this issue, we have devised a workflow functional on both Waters Quattro Premier and ABI 4000 QTRAP triple quadrupole instruments that allows rapid determination of the optimal value of any programmable instrument parameter for each MRM transition. Here, we demonstrate the strategy for the optimizations of collision energy and cone voltage, but the method could be applied to other instrument parameters, such as declustering potential, as well. The workflow makes use of the incremental adjustment of the precursor and product m/z values at the hundredth decimal place to create a series of MRM targets at different collision energies that can be cycled through in rapid succession within a single run, avoiding any run-to-run variability in execution or comparison. Results are easily visualized and quantified using the MRM software package Mr. M to determine the optimal instrument parameters for each transition. PMID:19405522

Toward continuous 4D microgravity monitoring of volcanoes

USGS Publications Warehouse

Williams-Jones, G.; Rymer, H.; Mauri, G.; Gottsmann, J.; Poland, M.; Carbone, D.

2008-01-01

Four-dimensional or time-lapse microgravity monitoring has been used effectively on volcanoes for decades to characterize the changes in subsurface volcanic systems. With measurements typically lasting from a few days to weeks and then repeated a year later, the spatial resolution of theses studies is often at the expense of temporal resolution and vice versa. Continuous gravity studies with one to two instruments operating for a short period of time (weeks to months) have shown enticing evidence of very rapid changes in the volcanic plumbing system (minutes to hours) and in one case precursory signals leading to eruptive activity were detected. The need for true multi-instrument networks is clear if we are to have both the temporal and spatial reso-lution needed for effective volcano monitoring. However, the high cost of these instruments is currently limiting the implementation of continuous microgravity networks. An interim approach to consider is the development of a collaborative network of researchers able to bring multiple instruments together at key volcanoes to investigate multitemporal physical changes in a few type volcanoes. However, to truly move forward, it is imperative that new low-cost instruments are developed to increase the number of instruments available at a single site. Only in this way can both the temporal and spatial integrity of monitoring be maintained. Integration of these instruments into a multiparameter network of continuously recording sensors is essential for effective volcano monitoring and hazard mitigation. ?? 2008 Society of Exploration Geophysicists. All rights reserved.

Diagnosing Secondary Students' Misconceptions of Photosynthesis and Respiration in Plants Using a Two-Tier Multiple Choice Instrument.

ERIC Educational Resources Information Center

Haslam, Filocha; Treagust, David F.

1987-01-01

Describes a multiple-choice instrument that reliably and validly diagnoses secondary students' understanding of photosynthesis and respiration in plants. Highlights the consistency of students' misconceptions across secondary levels and indicates a high percentage of students have misconceptions regarding plant physiology. (CW)

Reflections on John Monaghan's "Computer Algebra, Instrumentation, and the Anthropological Approach"

ERIC Educational Resources Information Center

Blume, Glen

2007-01-01

Reactions to John Monaghan's "Computer Algebra, Instrumentation and the Anthropological Approach" focus on a variety of issues related to the ergonomic approach (instrumentation) and anthropological approach to mathematical activity and practice. These include uses of the term technique; several possibilities for integration of the two approaches;…

Cleared for Launch - Lessons Learned from the OSIRIS-REx System Requirements Verification Program

NASA Technical Reports Server (NTRS)

Stevens, Craig; Adams, Angela; Williams, Bradley; Goodloe, Colby

2017-01-01

Requirements verification of a large flight system is a challenge. It is especially challenging for engineers taking on their first role in space systems engineering. This paper describes our approach to verification of the Origins, Spectral Interpretation, Resource Identification, Security-Regolith Explorer (OSIRIS-REx) system requirements. It also captures lessons learned along the way from developing systems engineers embroiled in this process. We begin with an overview of the mission and science objectives as well as the project requirements verification program strategy. A description of the requirements flow down is presented including our implementation for managing the thousands of program and element level requirements and associated verification data. We discuss both successes and methods to improve the managing of this data across multiple organizational interfaces. Our approach to verifying system requirements at multiple levels of assembly is presented using examples from our work at instrument, spacecraft, and ground segment levels. We include a discussion of system end-to-end testing limitations and their impacts to the verification program. Finally, we describe lessons learned that are applicable to all emerging space systems engineers using our unique perspectives across multiple organizations of a large NASA program.

Advancements for Active Remote Sensing of Carbon Dioxide from Space using the ASCENDS CarbonHawk Experiment Simulator: First Results

NASA Astrophysics Data System (ADS)

Obland, M. D.; Nehrir, A. R.; Lin, B.; Harrison, F. W.; Kooi, S. A.; Choi, Y.; Plant, J.; Yang, M. M.; Antill, C.; Campbell, J. F.; Ismail, S.; Browell, E. V.; Meadows, B.; Dobler, J. T.; Zaccheo, T. S.; Moore, B., III; Crowell, S.

2014-12-01

The ASCENDS CarbonHawk Experiment Simulator (ACES) is an Intensity-Modulated Continuous-Wave lidar system recently developed at NASA Langley Research Center that seeks to advance technologies and techniques critical to measuring atmospheric column carbon dioxide (CO2) mixing ratios in support of the NASA Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) mission. These advancements include: (1) increasing the power-aperture product to approach ASCENDS mission requirements by implementing multi-aperture telescopes and multiple co-aligned laser transmitters; (2) incorporating high-efficiency, high-power Erbium-Doped Fiber Amplifiers (EDFAs); (3) developing and incorporating a high-bandwidth, low-noise HgCdTe detector and transimpedence amplifier (TIA) subsystem capable of long-duration operation on Global Hawk aircraft, and (4) advancing algorithms for cloud and aerosol discrimination. The ACES instrument architecture is being developed for operation on high-altitude aircraft and will be directly scalable to meet the ASCENDS mission requirements. ACES simultaneously transmits five laser beams: three from commercial EDFAs operating near 1571 nm, and two from the Exelis oxygen (O2) Raman fiber laser amplifier system operating near 1260 nm. The Integrated-Path Differential Absorption (IPDA) lidar approach is used at both wavelengths to independently measure the CO2 and O2 column number densities and retrieve the average column CO2 mixing ratio. The outgoing laser beams are aligned to the field of view of ACES' three fiber-coupled 17.8-cm diameter athermal telescopes. The backscattered light collected by the three telescopes is sent to the detector/TIA subsystem, which has a bandwidth of 4.7 MHz and operates service-free using a tactical dewar and cryocooler. Two key laser modulation approaches are being tested to significantly mitigate the effects of thin clouds on the retrieved CO2 column amounts. Full instrument development concluded in the spring of 2014. After ground range tests of the instrument, ACES successfully completed six test flights on the Langley Hu-25 aircraft in July, 2014, and recorded data at multiple altitudes over land and ocean surfaces with and without intervening clouds. Preliminary results from these flights will be presented in this paper.

Simultaneous Retrieval of Multiple Aerosol Parameters Using a Multi-Angular Approach

NASA Technical Reports Server (NTRS)

Kuo, K. S.; Weger, R. C.; Welch, R. M.

1997-01-01

Atmospheric aerosol particles, both natural and anthropogenic, are important to the earth's radiative balance through their direct and indirect effects. They scatter the incoming solar radiation (direct effect) and modify the shortwave reflective properties of clouds by acting as cloud condensation nuclei (indirect effect). Although it has been suggested that aerosols exert a net cooling influence on climate, this effect has received less attention than the radiative forcing due to clouds and greenhouse gases. In order to understand the role that aerosols play in a changing climate, detailed and accurate observations are a prerequisite. The retrieval of aerosol optical properties by satellite remote sensing has proven to be a difficult task. The difficulty results mainly from the tenuous nature and variable composition of aerosols. To date, with single-angle satellite observations, we can only retrieve reliably against dark backgrounds, such as over oceans and dense vegetation. Even then, assumptions must be made concerning the chemical composition of aerosols. The best hope we have for aerosol retrievals over bright backgrounds are observations from multiple angles, such as those provided by the MISR and POLDER instruments. In this investigation we examine the feasibility of simultaneous retrieval of multiple aerosol optical parameters using reflectances from a typical set of twelve angles observed by the French POLDER instrument. The retrieved aerosol optical parameters consist of asymmetry factor, single scattering albedo, surface albedo, and optical thickness.

The effects of acute stress on Pavlovian-instrumental transfer in rats.

PubMed

Pielock, Steffi M; Braun, Stephanie; Hauber, Wolfgang

2013-03-01

Pavlovian stimuli invigorate ongoing instrumental action, a phenomenon termed the Pavlovian-instrumental transfer (PIT) effect. Acute stressors can markedly enhance the release of corticotropin-releasing factor (CRF), and CRF injection into the nucleus accumbens increases the PIT effect. However, it is unknown whether acute stressors by themselves would amplify the PIT effect. Here, we examined the effects of acute stressors on PIT. Rats first received Pavlovian and instrumental training, and then the impact of the Pavlovian stimuli on instrumental responding was analyzed in the subsequent PIT test. Acute stressors were applied prior to the PIT test. Because the effects of acute stressors critically depend on stressor type and time of day, we used two acute stressors that involved one or several distinct stressors (denoted here as "single" vs. "multiple" stressors) applied either in the light or the dark period of the light:dark cycle. The results revealed that single and multiple stressors applied in the light period did not alter the PIT effect--that is, the ability of an appetitive Pavlovian stimulus to enhance leverpressing--or the basal leverpress rate. When applied in the dark period, single and multiple stressors also did not alter the PIT effect, but they did markedly reduce the basal leverpress rate. Diazepam pretreatment did not counteract the declines in basal instrumental responding in the PIT test that were induced by either a single or multiple stressors. Our findings suggest that acute stressors were unable to amplify the incentive salience of reward-predictive Pavlovian stimuli to activate instrumental responding, but, depending on the time of day of stressor exposure, they did reduce basal instrumental responding.

Stepped MS(All) Relied Transition (SMART): An approach to rapidly determine optimal multiple reaction monitoring mass spectrometry parameters for small molecules.

PubMed

Ye, Hui; Zhu, Lin; Wang, Lin; Liu, Huiying; Zhang, Jun; Wu, Mengqiu; Wang, Guangji; Hao, Haiping

2016-02-11

Multiple reaction monitoring (MRM) is a universal approach for quantitative analysis because of its high specificity and sensitivity. Nevertheless, optimization of MRM parameters remains as a time and labor-intensive task particularly in multiplexed quantitative analysis of small molecules in complex mixtures. In this study, we have developed an approach named Stepped MS(All) Relied Transition (SMART) to predict the optimal MRM parameters of small molecules. SMART requires firstly a rapid and high-throughput analysis of samples using a Stepped MS(All) technique (sMS(All)) on a Q-TOF, which consists of serial MS(All) events acquired from low CE to gradually stepped-up CE values in a cycle. The optimal CE values can then be determined by comparing the extracted ion chromatograms for the ion pairs of interest among serial scans. The SMART-predicted parameters were found to agree well with the parameters optimized on a triple quadrupole from the same vendor using a mixture of standards. The parameters optimized on a triple quadrupole from a different vendor was also employed for comparison, and found to be linearly correlated with the SMART-predicted parameters, suggesting the potential applications of the SMART approach among different instrumental platforms. This approach was further validated by applying to simultaneous quantification of 31 herbal components in the plasma of rats treated with a herbal prescription. Because the sMS(All) acquisition can be accomplished in a single run for multiple components independent of standards, the SMART approach are expected to find its wide application in the multiplexed quantitative analysis of complex mixtures. Copyright © 2015 Elsevier B.V. All rights reserved.

A new fully automated FTIR system for total column measurements of greenhouse gases

NASA Astrophysics Data System (ADS)

Geibel, M. C.; Gerbig, C.; Feist, D. G.

2010-10-01

This article introduces a new fully automated FTIR system that is part of the Total Carbon Column Observing Network (TCCON). It will provide continuous ground-based measurements of column-averaged volume mixing ratio for CO2, CH4 and several other greenhouse gases in the tropics. Housed in a 20-foot shipping container it was developed as a transportable system that could be deployed almost anywhere in the world. We describe the automation concept which relies on three autonomous subsystems and their interaction. Crucial components like a sturdy and reliable solar tracker dome are described in detail. The automation software employs a new approach relying on multiple processes, database logging and web-based remote control. First results of total column measurements at Jena, Germany show that the instrument works well and can provide parts of the diurnal as well as seasonal cycle for CO2. Instrument line shape measurements with an HCl cell suggest that the instrument stays well-aligned over several months. After a short test campaign for side by side intercomaprison with an existing TCCON instrument in Australia, the system will be transported to its final destination Ascension Island.

Automatic Focus Adjustment of a Microscope

NASA Technical Reports Server (NTRS)

Huntsberger, Terrance

2005-01-01

AUTOFOCUS is a computer program for use in a control system that automatically adjusts the position of an instrument arm that carries a microscope equipped with an electronic camera. In the original intended application of AUTOFOCUS, the imaging microscope would be carried by an exploratory robotic vehicle on a remote planet, but AUTOFOCUS could also be adapted to similar applications on Earth. Initially control software other than AUTOFOCUS brings the microscope to a position above a target to be imaged. Then the instrument arm is moved to lower the microscope toward the target: nominally, the target is approached from a starting distance of 3 cm in 10 steps of 3 mm each. After each step, the image in the camera is subjected to a wavelet transform, which is used to evaluate the texture in the image at multiple scales to determine whether and by how much the microscope is approaching focus. A focus measure is derived from the transform and used to guide the arm to bring the microscope to the focal height. When the analysis reveals that the microscope is in focus, image data are recorded and transmitted.

Analytical instrumentation infrastructure for combinatorial and high-throughput development of formulated discrete and gradient polymeric sensor materials arrays

NASA Astrophysics Data System (ADS)

Potyrailo, Radislav A.; Hassib, Lamyaa

2005-06-01

Multicomponent polymer-based formulations of optical sensor materials are difficult and time consuming to optimize using conventional approaches. To address these challenges, our long-term goal is to determine relationships between sensor formulation and sensor response parameters using new scientific methodologies. As the first step, we have designed and implemented an automated analytical instrumentation infrastructure for combinatorial and high-throughput development of polymeric sensor materials for optical sensors. Our approach is based on the fabrication and performance screening of discrete and gradient sensor arrays. Simultaneous formation of multiple sensor coatings into discrete 4×6, 6×8, and 8×12 element arrays (3-15μL volume per element) and their screening provides not only a well-recognized acceleration in the screening rate, but also considerably reduces or even eliminates sources of variability, which are randomly affecting sensors response during a conventional one-at-a-time sensor coating evaluation. The application of gradient sensor arrays provides additional capabilities for rapid finding of the optimal formulation parameters.

Quantitative evaluation of apically extruded debris with different single-file systems: Reciproc, F360 and OneShape versus Mtwo.

PubMed

Bürklein, S; Benten, S; Schäfer, E

2014-05-01

To assess in a laboratory setting the amount of apically extruded debris associated with different single-file nickel-titanium instrumentation systems compared to one multiple-file rotary system. Eighty human mandibular central incisors were randomly assigned to four groups (n = 20 teeth per group). The root canals were instrumented according to the manufacturers' instructions using the reciprocating single-file system Reciproc, the single-file rotary systems F360 and OneShape and the multiple-file rotary Mtwo instruments. The apically extruded debris was collected and dried in pre-weighed glass vials. The amount of debris was assessed with a micro balance and statistically analysed using anova and post hoc Student-Newman-Keuls test. The time required to prepare the canals with the different instruments was also recorded. Reciproc produced significantly more debris compared to all other systems (P < 0.05). No significant difference was noted between the two single-file rotary systems and the multiple-file rotary system (P > 0.05). Instrumentation with the three single-file systems was significantly faster than with Mtwo (P < 0.05). Under the condition of this study, all systems caused apical debris extrusion. Rotary instrumentation was associated with less debris extrusion compared to reciprocal instrumentation. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

A Sample of What We Have Learned from A-Train Cloud Measurements

NASA Technical Reports Server (NTRS)

Joiner, Joanna; Vasilkov, Alexander; Ziemke, Jerry; Chandra, Sushil; Spurr, Robert; Bhartia, P. K.; Krotkov, Nick; Sneep, Maarten; Menzel, Paul; Platnick, Steve;

Onboard Image Registration from Invariant Features

NASA Technical Reports Server (NTRS)

Wang, Yi; Ng, Justin; Garay, Michael J.; Burl, Michael C

2008-01-01

This paper describes a feature-based image registration technique that is potentially well-suited for onboard deployment. The overall goal is to provide a fast, robust method for dynamically combining observations from multiple platforms into sensors webs that respond quickly to short-lived events and provide rich observations of objects that evolve in space and time. The approach, which has enjoyed considerable success in mainstream computer vision applications, uses invariant SIFT descriptors extracted at image interest points together with the RANSAC algorithm to robustly estimate transformation parameters that relate one image to another. Experimental results for two satellite image registration tasks are presented: (1) automatic registration of images from the MODIS instrument on Terra to the MODIS instrument on Aqua and (2) automatic stabilization of a multi-day sequence of GOES-West images collected during the October 2007 Southern California wildfires.

Research lessons from implementing a national nursing workforce study.

PubMed

Brzostek, T; Brzyski, P; Kózka, M; Squires, A; Przewoźniak, L; Cisek, M; Gajda, K; Gabryś, T; Ogarek, M

2015-09-01

National nursing workforce studies are important for evidence-based policymaking to improve nursing human resources globally. Survey instrument translation and contextual adaptation along with level of experience of the research team are key factors that will influence study implementation and results in countries new to health workforce studies. This study's aim was to describe the pre-data collection instrument adaptation challenges when designing the first national nursing workforce study in Poland while participating in the Nurse Forecasting: Human Resources Planning in Nursing project. A descriptive analysis of the pre-data collection phase of the study. Instrument adaptation was conducted through a two-phase content validity indexing process and pilot testing from 2009 to September 2010 in preparation for primary study implementation in December 2010. Means of both content validation phases were compared with pilot study results to assess for significant patterns in the data. The initial review demonstrated that the instrument had poor level of cross-cultural relevance and multiple translation issues. After revising the translation and re-evaluating using the same process, instrument scores improved significantly. Pilot study results showed floor and ceiling effects on relevance score correlations in each phase of the study. The cross-cultural adaptation process was developed specifically for this study and is, therefore, new. It may require additional replication to further enhance the method. The approach used by the Polish team helped identify potential problems early in the study. The critical step improved the rigour of the results and improved comparability for between countries analyses, conserving both money and resources. This approach is advised for cross-cultural adaptation of instruments to be used in national nursing workforce studies. Countries seeking to conduct national nursing workforce surveys to improve nursing human resources policies may find the insights provided by this paper useful to guide national level nursing workforce study implementation. © 2015 International Council of Nurses.

Under What Assumptions Do Site-by-Treatment Instruments Identify Average Causal Effects?

ERIC Educational Resources Information Center

Reardon, Sean F.; Raudenbush, Stephen W.

2013-01-01

The increasing availability of data from multi-site randomized trials provides a potential opportunity to use instrumental variables methods to study the effects of multiple hypothesized mediators of the effect of a treatment. We derive nine assumptions needed to identify the effects of multiple mediators when using site-by-treatment interactions…

National policy on physical activity: the development of a policy audit tool.

PubMed

Bull, Fiona C; Milton, Karen; Kahlmeier, Sonja

2014-02-01

Physical inactivity is a leading risk factor for noncommunicable disease worldwide. Increasing physical activity requires large scale actions and relevant, supportive national policy across multiple sectors. The policy audit tool (PAT) was developed to provide a standardized instrument to assess national policy approaches to physical activity. A draft tool, based on earlier work, was developed and pilot-tested in 7 countries. After several rounds of revisions, the final PAT comprises 27 items and collects information on 1) government structure, 2) development and content of identified key policies across multiple sectors, 3) the experience of policy implementation at both the national and local level, and 4) a summary of the PAT completion process. PAT provides a standardized instrument for assessing progress of national policy on physical activity. Engaging a diverse international group of countries in the development helped ensure PAT has applicability across a wide range of countries and contexts. Experiences from the development of the PAT suggests that undertaking an audit of health enhancing physical activity (HEPA) policy can stimulate greater awareness of current policy opportunities and gaps, promote critical debate across sectors, and provide a catalyst for collaboration on policy level actions. The final tool is available online.

2010 CEOS Field Reflectance Intercomparisons Lessons Learned

NASA Technical Reports Server (NTRS)

Thome, Kurtis; Fox, Nigel

2011-01-01

This paper summarizes lessons learned from the 2009 and 2010 joint field campaigns to Tuz Golu, Turkey. Emphasis is placed on the 2010 campaign related to understanding the equipment and measurement protocols, processing schemes, and traceability to SI quantities. Participants in both 2009 and 2010 used an array of measurement approaches to determine surface reflectance. One lesson learned is that even with all of the differences in collection between groups, the differences in reflectance are currently dominated by instrumental artifacts including knowledge of the white reference. Processing methodology plays a limited role once the bi-directional reflectance of the white reference is used rather than a hemispheric-directional value. The lack of a basic set of measurement protocols, or best practices, limits a group s ability to ensure SI traceability and the development of proper error budgets. Finally, rigorous attention to sampling methodology and its impact on instrument behavior is needed. The results of the 2009 and 2010 joint campaigns clearly demonstrate both the need and utility of such campaigns and such comparisons must continue in the future to ensure a coherent set of data that can span multiple sensor types and multiple decades.

High-grade, compact spectrometers for Earth observation from SmallSats

NASA Astrophysics Data System (ADS)

van der Wal, L. F.; de Goeij, B. T. G.; Jansen, R.; Oosterling, J. A. J.; Snijders, B.

2016-10-01

The market for nano- and microsatellites is developing rapidly. There is a strong focus on 2D imaging of the Earth's surface, with limited possibilities to obtain spectral information. More demanding applications, such as monitoring trace gases, aerosols or water quality still require advanced imaging instruments, which are large, heavy and expensive. In recent years TNO has investigated and developed different innovative designs to realize advanced spectrometers for space applications in a more compact and cost-effective manner. This offers multiple advantages: a compact instrument can be flown on a much smaller platform (nano- or microsatellite); a low-cost instrument opens up the possibility to fly multiple instruments in a satellite constellation, improving both global coverage and temporal sampling (e.g. to study diurnal processes); a constellation of low-cost instruments may provide added value to the larger scientific and operational satellite missions (e.g. the Copernicus Sentinel missions); and a small, lightweight spectrometer can also be mounted easily on a high-altitude UAV (offering high spatial resolution). Last but not least, a low-cost instrument may allow to break through the `cost spiral': lower cost will allow to take more risk and thus progress more quickly. This may lead to a much faster development cycle than customary for current Earth Observation instruments. To explore the potential of a constellation of low-cost instruments a consortium of Dutch partners was formed, which currently consists of Airbus Defence and Space Netherlands, ISISpace, S and T and TNO. In this paper we will illustrate this new design approach by using the most advanced design of a hyperspectral imaging spectrometer (named `Spectrolite') as an example. We will discuss the different design and manufacturing techniques that were used to realize this compact and low-cost design. Laboratory tests as well as the first preliminary results of airborne measurements with the Spectrolite breadboard will be presented and discussed. The design of Spectrolite offers the flexibility to tune its performance (spectral range, spectral resolution) to a specific application. Thus, based on the same basic system design, Spectrolite offers a range of applications to different clients. To illustrate this, we will present a mission concept to monitor NO2 concentrations over urban areas at high spatial resolution, based on a constellation of small satellites.

A cadaveric study of the endoscopic endonasal transclival approach to the basilar artery.

PubMed

Lai, Leon T; Morgan, Michael K; Chin, David C W; Snidvongs, Kornkiat; Huang, June X Z; Malek, Joanne; Lam, Matthew; McLachlan, Rohan; Harvey, Richard J

2013-04-01

The anterior transclival route to basilar artery aneurysms is not widely performed. The objective of this study was to carry out a feasibility assessment of the transclival approach to basilar aneurysms with advanced endonasal techniques on 11 cadaver heads. Clival dura was exposed from the sella to the foramen magnum between the paraclival segments of the internal carotid arteries (ICA) laterally. An inverted dural "U" flap was reflected inferiorly to expose the basilar artery. The maximal dimensions from operative measurements were recorded. Surgical manoeuvrability of multiple instruments and the proficiency to place proximal and distal vascular clips were evaluated. The mean operative depth (± standard deviation), measured from the anterior choanae to the basilar artery, was 110±6mm. The lateral corridors were limited distally by the medial pterygoids (mean width 21±2mm) and paraclival ICA (mean width 20±2mm). The mean transclival craniectomy dimensions were 19±2mm (width) and 23±4mm (height). Exposure of the basilar-anterior inferior cerebellar artery junction, superior cerebellar artery, and the basilar caput were possible in 100%, 91%, and 64% of instances, respectively. Placements of proximal and distal aneurysm clips were achieved in all instances. Based on our findings, the transclival endoscopic endonasal surgery approach provides excellent visualisation of the basilar artery. Clip application and manoeuvrability of instruments was considered adequate for basilar aneurysm surgery. Surgical skills and instrumentation to control significant haemorrhage can potentially limit the clinical applicability of this technique. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

Shifting from Stewardship to Analytics of Massive Science Data

NASA Astrophysics Data System (ADS)

Crichton, D. J.; Doyle, R.; Law, E.; Hughes, S.; Huang, T.; Mahabal, A.

2015-12-01

Currently, the analysis of large data collections is executed through traditional computational and data analysis approaches, which require users to bring data to their desktops and perform local data analysis. Data collection, archiving and analysis from future remote sensing missions, be it from earth science satellites, planetary robotic missions, or massive radio observatories may not scale as more capable instruments stress existing architectural approaches and systems due to more continuous data streams, data from multiple observational platforms, and measurements and models from different agencies. A new paradigm is needed in order to increase the productivity and effectiveness of scientific data analysis. This paradigm must recognize that architectural choices, data processing, management, analysis, etc are interrelated, and must be carefully coordinated in any system that aims to allow efficient, interactive scientific exploration and discovery to exploit massive data collections. Future observational systems, including satellite and airborne experiments, and research in climate modeling will significantly increase the size of the data requiring new methodological approaches towards data analytics where users can more effectively interact with the data and apply automated mechanisms for data reduction, reduction and fusion across these massive data repositories. This presentation will discuss architecture, use cases, and approaches for developing a big data analytics strategy across multiple science disciplines.

14 CFR 121.567 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Instrument approach procedures and IFR landing minimums. 121.567 Section 121.567 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... approach at an airport except in accordance with IFR weather minimums and instrument approach procedures...

14 CFR 121.567 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Instrument approach procedures and IFR landing minimums. 121.567 Section 121.567 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... approach at an airport except in accordance with IFR weather minimums and instrument approach procedures...

14 CFR 121.567 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Instrument approach procedures and IFR landing minimums. 121.567 Section 121.567 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... approach at an airport except in accordance with IFR weather minimums and instrument approach procedures...

14 CFR 121.567 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Instrument approach procedures and IFR landing minimums. 121.567 Section 121.567 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... approach at an airport except in accordance with IFR weather minimums and instrument approach procedures...

14 CFR 121.567 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Instrument approach procedures and IFR landing minimums. 121.567 Section 121.567 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... approach at an airport except in accordance with IFR weather minimums and instrument approach procedures...

Dual-resolution Raman spectroscopy for measurements of temperature and twelve species in hydrocarbon–air flames

DOE Office of Scientific and Technical Information (OSTI.GOV)

Magnotti, Gaetano; Barlow, Robert S.

2016-07-12

This study introduces dual-resolution Raman spectroscopy as a novel diagnostics approach for measurements of temperature and species in flames where multiple hydrocarbons are present. Simultaneous measurement of multiple hydrocarbons is challenging because their vibrational Raman spectra in the C–H stretch region are closely overlapped and are not well known over the range of temperature encountered in flames. Overlap between the hydrocarbon spectra is mitigated by adding a second spectrometer, with a higher dispersion grating, to collect the Raman spectra in the C–H stretch region. A dual-resolution Raman spectroscopy instrument has been developed and optimized for measurements of major species (Nmore » 2, O 2, H 2O, CO 2, CO, H 2, DME) and major combustion intermediates (CH 4, CH 2O, C 2H 2, C 2H 4 and C 2H 6) in DME–air flames. The temperature dependences of the hydrocarbon Raman spectra over fixed spectral regions have been determined through a series of measurements in laminar Bunsen-burner flames, and have been used to extend a library of previously acquired Raman spectra up to flame temperature. The paper presents the first Raman measurements of up to twelve species in hydrocarbon flames, and the first quantitative Raman measurements of formaldehyde in flames. Lastly, the accuracy and precision of the instrument are determined from measurements in laminar flames and the applicability of the instrument to turbulent DME–air flames is discussed.« less

Adjusted Analyses in Studies Addressing Therapy and Harm: Users' Guides to the Medical Literature.

PubMed

Agoritsas, Thomas; Merglen, Arnaud; Shah, Nilay D; O'Donnell, Martin; Guyatt, Gordon H

2017-02-21

Observational studies almost always have bias because prognostic factors are unequally distributed between patients exposed or not exposed to an intervention. The standard approach to dealing with this problem is adjusted or stratified analysis. Its principle is to use measurement of risk factors to create prognostically homogeneous groups and to combine effect estimates across groups.The purpose of this Users' Guide is to introduce readers to fundamental concepts underlying adjustment as a way of dealing with prognostic imbalance and to the basic principles and relative trustworthiness of various adjustment strategies.One alternative to the standard approach is propensity analysis, in which groups are matched according to the likelihood of membership in exposed or unexposed groups. Propensity methods can deal with multiple prognostic factors, even if there are relatively few patients having outcome events. However, propensity methods do not address other limitations of traditional adjustment: investigators may not have measured all relevant prognostic factors (or not accurately), and unknown factors may bias the results.A second approach, instrumental variable analysis, relies on identifying a variable associated with the likelihood of receiving the intervention but not associated with any prognostic factor or with the outcome (other than through the intervention); this could mimic randomization. However, as with assumptions of other adjustment approaches, it is never certain if an instrumental variable analysis eliminates bias.Although all these approaches can reduce the risk of bias in observational studies, none replace the balance of both known and unknown prognostic factors offered by randomization.

A convolutional neural network-based screening tool for X-ray serial crystallography

PubMed Central

Ke, Tsung-Wei; Brewster, Aaron S.; Yu, Stella X.; Ushizima, Daniela; Yang, Chao; Sauter, Nicholas K.

2018-01-01

A new tool is introduced for screening macromolecular X-ray crystallography diffraction images produced at an X-ray free-electron laser light source. Based on a data-driven deep learning approach, the proposed tool executes a convolutional neural network to detect Bragg spots. Automatic image processing algorithms described can enable the classification of large data sets, acquired under realistic conditions consisting of noisy data with experimental artifacts. Outcomes are compared for different data regimes, including samples from multiple instruments and differing amounts of training data for neural network optimization. PMID:29714177

A convolutional neural network-based screening tool for X-ray serial crystallography.

PubMed

Ke, Tsung Wei; Brewster, Aaron S; Yu, Stella X; Ushizima, Daniela; Yang, Chao; Sauter, Nicholas K

2018-05-01

A new tool is introduced for screening macromolecular X-ray crystallography diffraction images produced at an X-ray free-electron laser light source. Based on a data-driven deep learning approach, the proposed tool executes a convolutional neural network to detect Bragg spots. Automatic image processing algorithms described can enable the classification of large data sets, acquired under realistic conditions consisting of noisy data with experimental artifacts. Outcomes are compared for different data regimes, including samples from multiple instruments and differing amounts of training data for neural network optimization. open access.

A convolutional neural network-based screening tool for X-ray serial crystallography

DOE PAGES

Ke, Tsung-Wei; Brewster, Aaron S.; Yu, Stella X.; ...

2018-04-24

A new tool is introduced for screening macromolecular X-ray crystallography diffraction images produced at an X-ray free-electron laser light source. Based on a data-driven deep learning approach, the proposed tool executes a convolutional neural network to detect Bragg spots. Automatic image processing algorithms described can enable the classification of large data sets, acquired under realistic conditions consisting of noisy data with experimental artifacts. Outcomes are compared for different data regimes, including samples from multiple instruments and differing amounts of training data for neural network optimization.

A convolutional neural network-based screening tool for X-ray serial crystallography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ke, Tsung-Wei; Brewster, Aaron S.; Yu, Stella X.

A new tool is introduced for screening macromolecular X-ray crystallography diffraction images produced at an X-ray free-electron laser light source. Based on a data-driven deep learning approach, the proposed tool executes a convolutional neural network to detect Bragg spots. Automatic image processing algorithms described can enable the classification of large data sets, acquired under realistic conditions consisting of noisy data with experimental artifacts. Outcomes are compared for different data regimes, including samples from multiple instruments and differing amounts of training data for neural network optimization.

Theoretical and Experimental Studies of Epidermal Heat Flux Sensors for Measurements of Core Body Temperature

PubMed Central

Zhang, Yihui; Webb, Richard Chad; Luo, Hongying; Xue, Yeguang; Kurniawan, Jonas; Cho, Nam Heon; Krishnan, Siddharth; Li, Yuhang; Huang, Yonggang

2016-01-01

Long-term, continuous measurement of core body temperature is of high interest, due to the widespread use of this parameter as a key biomedical signal for clinical judgment and patient management. Traditional approaches rely on devices or instruments in rigid and planar forms, not readily amenable to intimate or conformable integration with soft, curvilinear, time-dynamic, surfaces of the skin. Here, materials and mechanics designs for differential temperature sensors are presented which can attach softly and reversibly onto the skin surface, and also sustain high levels of deformation (e.g., bending, twisting, and stretching). A theoretical approach, together with a modeling algorithm, yields core body temperature from multiple differential measurements from temperature sensors separated by different effective distances from the skin. The sensitivity, accuracy, and response time are analyzed by finite element analyses (FEA) to provide guidelines for relationships between sensor design and performance. Four sets of experiments on multiple devices with different dimensions and under different convection conditions illustrate the key features of the technology and the analysis approach. Finally, results indicate that thermally insulating materials with cellular structures offer advantages in reducing the response time and increasing the accuracy, while improving the mechanics and breathability. PMID:25953120

Evaluation of an inexpensive instrument to detect insects using multiple sound, vibration, and LED sensors

USDA-ARS?s Scientific Manuscript database

Instruments have been available for many years to detect insects using sound, vibration, or LED sensors separately. Most of these instruments are relatively expensive. An instrument was evaluated that incorporates all three types of sensors to improve the reliability of distinguishing different spec...

Evaluation of an inexpensive instrument to detect insects using multiple sound, vibration, and LED sensors

USDA-ARS?s Scientific Manuscript database

Instruments have been available for many years to detect insects using sound, vibration, or LED sensors separately. Most of these instruments are relatively expensive. An instrument was evaluated that incorporates all three types of sensors to improve the reliability of distinguishing different sp...

Multiple NEO Rendezvous, Reconnaissance and In Situ Exploration

NASA Astrophysics Data System (ADS)

Klaus, K.; Elsperman, M. S.; Cook, T.; Smith, D.

2010-12-01

We propose a two spacecraft mission (Mother Ship and Small Body Lander) rendezvous with multiple Near Earth Objects (NEO). This two spacecraft mission mimics the likely architecture approach that human explorers will use: a “mother ship”(MS) designed to get from Earth to the NEO and a “Small Body Lander”(SBL) that performs in situ investigation on or close to the NEO’s surface. The MS carries the SBL to the target NEO. Once at the target NEO, the MS conducts an initial reconnaissance in order to produce a high resolution map of the surface. This map is used to identify coordinates of interest which are sent to the SBL. The SBL un-docks from the MS to rendezvous with the NEO and collect data. Landings are possible, though the challenges of anchoring to the NEO surface are significant. The SBL design is flexible and adaptable, enabling science data collection on or near the surface. After surface investigations are completed on the first NEO, the SBL will return and autonomously rendezvous and dock with the MS. The MS then goes to the next NEO target. During transit to the next NEO, the SBL could be refueled by the MS, a TRL8 capability demonstrated on the DARPA/NASA Orbital Express mission in 2007, or alternately sized to operate without requiring refueling depending on the mission profile. The mission goals are to identify surface hazards; quantify engineering boundary conditions for future human visits, and identify resources for future exploitation. The mission goals will be accomplished through the execution of key mission objectives: (1) high-resolution surface topography; (2) surface composition and mineralogy; (3) radiation environment near NEO; and (4) mechanical properties of the surface. Essential SBL instruments include: a) LIDAR (Obj. 1); b) 3D, high- resolution hyperspectral imaging cameras (Obj. 2); c) radiation sensor package (Obj. 3); and d) strain gauges (Obj. 4). Additional or alternative instruments could include: e) x-ray fluorescence or laser-induced breakdown spectroscopy (LIBS) sensor package (Obj. 2); f) gamma ray/neutron spectrometry package (Obj. 2); and g) radiometer package (to address variations in thermal environment). The ability to reach, survey, sample, and analyze multiple NEOs at close proximity is an enormous capability that can enable NASA to rapidly achieve the primary Exploration Precursor Robotic Mission (xPRM) Program goal of characterizing NEOs for future human exploration. Instead of launching multiple dedicated missions to each NEO of interest, a multi-NEO sortie mission can be planned and executed to achieve the same mission objectives with one launch, dramatically reducing the cost of NEO exploration. Collectively, our NEO Exploration System Architecture provides solutions for a wide variety of exploration activities using a common spacecraft bus and common core instrumentation for the spacecraft. This engineering consistency will substantially improve the probability of mission success, increase the likelihood of maintaining an aggressive launch schedule, and decrease the total cost of multiple missions. NASA successfully used this approach with the robotic precursors leading up to the Apollo missions, and we see significant benefits from this same programmatic approach for the xPRM program.

An optimization-based approach for facility energy management with uncertainties, and, Power portfolio optimization in deregulated electricity markets with risk management

NASA Astrophysics Data System (ADS)

Xu, Jun

Topic 1. An Optimization-Based Approach for Facility Energy Management with Uncertainties. Effective energy management for facilities is becoming increasingly important in view of the rising energy costs, the government mandate on the reduction of energy consumption, and the human comfort requirements. This part of dissertation presents a daily energy management formulation and the corresponding solution methodology for HVAC systems. The problem is to minimize the energy and demand costs through the control of HVAC units while satisfying human comfort, system dynamics, load limit constraints, and other requirements. The problem is difficult in view of the fact that the system is nonlinear, time-varying, building-dependent, and uncertain; and that the direct control of a large number of HVAC components is difficult. In this work, HVAC setpoints are the control variables developed on top of a Direct Digital Control (DDC) system. A method that combines Lagrangian relaxation, neural networks, stochastic dynamic programming, and heuristics is developed to predict the system dynamics and uncontrollable load, and to optimize the setpoints. Numerical testing and prototype implementation results show that our method can effectively reduce total costs, manage uncertainties, and shed the load, is computationally efficient. Furthermore, it is significantly better than existing methods. Topic 2. Power Portfolio Optimization in Deregulated Electricity Markets with Risk Management. In a deregulated electric power system, multiple markets of different time scales exist with various power supply instruments. A load serving entity (LSE) has multiple choices from these instruments to meet its load obligations. In view of the large amount of power involved, the complex market structure, risks in such volatile markets, stringent constraints to be satisfied, and the long time horizon, a power portfolio optimization problem is of critical importance but difficulty for an LSE to serve the load, maximize its profit, and manage risks. In this topic, a mid-term power portfolio optimization problem with risk management is presented. Key instruments are considered, risk terms based on semi-variances of spot market transactions are introduced, and penalties on load obligation violations are added to the objective function to improve algorithm convergence and constraint satisfaction. To overcome the inseparability of the resulting problem, a surrogate optimization framework is developed enabling a decomposition and coordination approach. Numerical testing results show that our method effectively provides decisions for various instruments to maximize profit, manage risks, and is computationally efficient.

Dynamic modal estimation using instrumental variables

NASA Technical Reports Server (NTRS)

Salzwedel, H.

1980-01-01

A method to determine the modes of dynamical systems is described. The inputs and outputs of a system are Fourier transformed and averaged to reduce the error level. An instrumental variable method that estimates modal parameters from multiple correlations between responses of single input, multiple output systems is applied to estimate aircraft, spacecraft, and off-shore platform modal parameters.

The Development and Validation of a Two-Tiered Multiple-Choice Instrument to Identify Alternative Conceptions in Earth Science

ERIC Educational Resources Information Center

Mangione, Katherine Anna

2010-01-01

This study was to determine reliability and validity for a two-tiered, multiple- choice instrument designed to identify alternative conceptions in earth science. Additionally, this study sought to identify alternative conceptions in earth science held by preservice teachers, to investigate relationships between self-reported confidence scores and…

Multiple Homicide as a Function of Prisonization and Concurrent Instrumental Violence: Testing an Interactive Model--A Research Note

ERIC Educational Resources Information Center

DeLisi, Matt; Walters, Glenn D.

2011-01-01

Prisonization (as measured by number of prior incarcerations) and concurrent instrumental offending (as measured by contemporaneous kidnapping, rape, robbery, and burglary offenses) were found to interact in 160 multiple-homicide offenders and 494 single-homicide offenders. Controlling for age, gender, race, criminal history, prior incarcerations,…

Tracking multiple surgical instruments in a near-infrared optical system.

PubMed

Cai, Ken; Yang, Rongqian; Lin, Qinyong; Wang, Zhigang

2016-12-01

Surgical navigation systems can assist doctors in performing more precise and more efficient surgical procedures to avoid various accidents. The near-infrared optical system (NOS) is an important component of surgical navigation systems. However, several surgical instruments are used during surgery, and effectively tracking all of them is challenging. A stereo matching algorithm using two intersecting lines and surgical instrument codes is proposed in this paper. In our NOS, the markers on the surgical instruments can be captured by two near-infrared cameras. After automatically searching and extracting their subpixel coordinates in the left and right images, the coordinates of the real and pseudo markers are determined by the two intersecting lines. Finally, the pseudo markers are removed to achieve accurate stereo matching by summing the codes for the distances between a specific marker with the other two markers on the surgical instrument. Experimental results show that the markers on the different surgical instruments can be automatically and accurately recognized. The NOS can accurately track multiple surgical instruments.

An automated calibration laboratory - Requirements and design approach

NASA Technical Reports Server (NTRS)

O'Neil-Rood, Nora; Glover, Richard D.

1990-01-01

NASA's Dryden Flight Research Facility (Ames-Dryden), operates a diverse fleet of research aircraft which are heavily instrumented to provide both real time data for in-flight monitoring and recorded data for postflight analysis. Ames-Dryden's existing automated calibration (AUTOCAL) laboratory is a computerized facility which tests aircraft sensors to certify accuracy for anticipated harsh flight environments. Recently, a major AUTOCAL lab upgrade was initiated; the goal of this modernization is to enhance productivity and improve configuration management for both software and test data. The new system will have multiple testing stations employing distributed processing linked by a local area network to a centralized database. The baseline requirements for the new AUTOCAL lab and the design approach being taken for its mechanization are described.

Review of Measures of Worksite Environmental and Policy Supports for Physical Activity and Healthy Eating

PubMed Central

Reeds, Dominic N.; van Bakergem, Margaret A.; Marx, Christine M.; Brownson, Ross C.; Pamulapati, Surya C.; Hoehner, Christine M.

2015-01-01

Introduction Obesity prevention strategies are needed that target multiple settings, including the worksite. The objective of this study was to assess the state of science concerning available measures of worksite environmental and policy supports for physical activity (PA) and healthy eating (HE). Methods We searched multiple databases for instruments used to assess worksite environments and policies. Two commonly cited instruments developed by state public health departments were also included. Studies that were published from 1991 through 2013 in peer-reviewed publications and gray literature that discussed the development or use of these instruments were analyzed. Instrument administration mode and measurement properties were documented. Items were classified by general health topic, 5 domains of general worksite strategy, and 19 subdomains of worksite strategy specific to PA or HE. Characteristics of worksite measures were described including measurement properties, length, and administration mode, as well as frequencies of items by domain and subdomain. Results Seventeen instruments met inclusion criteria (9 employee surveys, 5 manager surveys, 1 observational assessment, and 2 studies that used multiple administration modes). Fourteen instruments included reliability testing. More items were related to PA than HE. Most instruments (n = 10) lacked items in the internal social environment domain. The most common PA subdomains were exercise facilities and lockers/showers; the most common HE subdomain was healthy options/vending. Conclusion This review highlights gaps in measurement of the worksite social environment. The findings provide a useful resource for researchers and practitioners and should inform future instrument development. PMID:25950572

Review of measures of worksite environmental and policy supports for physical activity and healthy eating.

PubMed

Hipp, J Aaron; Reeds, Dominic N; van Bakergem, Margaret A; Marx, Christine M; Brownson, Ross C; Pamulapati, Surya C; Hoehner, Christine M

2015-05-07

Obesity prevention strategies are needed that target multiple settings, including the worksite. The objective of this study was to assess the state of science concerning available measures of worksite environmental and policy supports for physical activity (PA) and healthy eating (HE). We searched multiple databases for instruments used to assess worksite environments and policies. Two commonly cited instruments developed by state public health departments were also included. Studies that were published from 1991 through 2013 in peer-reviewed publications and gray literature that discussed the development or use of these instruments were analyzed. Instrument administration mode and measurement properties were documented. Items were classified by general health topic, 5 domains of general worksite strategy, and 19 subdomains of worksite strategy specific to PA or HE. Characteristics of worksite measures were described including measurement properties, length, and administration mode, as well as frequencies of items by domain and subdomain. Seventeen instruments met inclusion criteria (9 employee surveys, 5 manager surveys, 1 observational assessment, and 2 studies that used multiple administration modes). Fourteen instruments included reliability testing. More items were related to PA than HE. Most instruments (n = 10) lacked items in the internal social environment domain. The most common PA subdomains were exercise facilities and lockers/showers; the most common HE subdomain was healthy options/vending. This review highlights gaps in measurement of the worksite social environment. The findings provide a useful resource for researchers and practitioners and should inform future instrument development.

A layered approach to technology transfer of AVIRIS between Earth Search Sciences, Inc. and the Idaho National Engineering Laboratory

NASA Technical Reports Server (NTRS)

Ferguson, James S.; Ferguson, Joanne E.; Peel, John, III; Vance, Larry

1995-01-01

Since initial contact between Earth Search Sciences, Inc. (ESSI) and the Idaho National Engineering Laboratory (INEL) in February, 1994, at least seven proposals have been submitted in response to a variety of solicitations to commercialize and improve the AVIRIS instrument. These proposals, matching ESSI's unique position with respect to agreements with the National Aeronautics and Space Administration (NASA) and the Jet Propulsion Laboratory (JPL) to utilize, miniaturize, and commercialize the AVIRIS instrument and platform, are combined with the applied engineering of the INEL. Teaming ESSI, NASA/JPL, and INEL with diverse industrial partners has strengthened the respective proposals. These efforts carefully structure the overall project plans to ensure the development, demonstration, and deployment of this concept to the national and international arenas. The objectives of these efforts include: (1) developing a miniaturized commercial, real-time, cost effective version of the AVIRIS instrument; (2) identifying multiple users for AVIRIS; (3) integrating the AVIRIS technology with other technologies; (4) gaining the confidence/acceptance of other government agencies and private industry in AVIRIS; and (5) increasing the technology base of U.S. industry.

Chemical Instrumentation for the Visually Handicapped.

ERIC Educational Resources Information Center

Anderson, James L.

1982-01-01

Describes a simple, relatively inexpensive, and easily implemented approach for introducing visually handicapped students to chemical instrumentation via experiments on operational amplifiers as examples of some of the electronic building blocks of chemical instrumentation. The approach is applicable to other chemical instruments having electrical…

Development and Application of a Two-Tier Multiple Choice Diagnostic Instrument To Assess High School Students' Understanding of Inorganic Chemistry Qualitative Analysis.

ERIC Educational Resources Information Center

Tan, Kim Chwee Daniel; Goh, Ngoh Khang; Chia, Lian Sai; Treagust, David F.

2002-01-01

Describes the development and application of a two-tier multiple choice diagnostic instrument to assess high school students' understanding of inorganic chemistry qualitative analysis. Shows that the Grade 10 students had difficulty understanding the reactions involved in the identification of cations and anions, for example, double decomposition…

Scheduling Results for the THEMIS Observation Scheduling Tool

NASA Technical Reports Server (NTRS)

Mclaren, David; Rabideau, Gregg; Chien, Steve; Knight, Russell; Anwar, Sadaat; Mehall, Greg; Christensen, Philip

2011-01-01

We describe a scheduling system intended to assist in the development of instrument data acquisitions for the THEMIS instrument, onboard the Mars Odyssey spacecraft, and compare results from multiple scheduling algorithms. This tool creates observations of both (a) targeted geographical regions of interest and (b) general mapping observations, while respecting spacecraft constraints such as data volume, observation timing, visibility, lighting, season, and science priorities. This tool therefore must address both geometric and state/timing/resource constraints. We describe a tool that maps geometric polygon overlap constraints to set covering constraints using a grid-based approach. These set covering constraints are then incorporated into a greedy optimization scheduling algorithm incorporating operations constraints to generate feasible schedules. The resultant tool generates schedules of hundreds of observations per week out of potential thousands of observations. This tool is currently under evaluation by the THEMIS observation planning team at Arizona State University.

Environmental applications for the analysis of chlorinated dibenzo-p-dioxins and dibenzofurans using mass spectrometry/mass spectrometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reiner, E.J.; Schellenberg, D.H.; Taguchi, V.Y.

1991-01-01

A mass spectrometry/mass spectrometry-multiple reaction monitoring (MS/MS-MRM) technique for the analysis of all tetra- through octachlorinated dibenzo-p-dioxins (Cl{sub x}DD, x = 4-8) and dibenzofurans (Cl{sub x}DF, x = 4-8) has been developed at the Ministry of the Environment (MOE) utilizing a triple quadrupole mass spectrometer. Optimization of instrumental parameters using the analyte of interest in a direct insertion probe (DIP) resulted in sensitivities approaching those obtainable by high-resolution mass spectrometric (HRMS) methods. All congeners of dioxins and furans were detected in the femtogram range. Results on selected samples indicated that for some matrices, fewer chemical interferences were observed by MS/MSmore » than by HRMS. The technique used to optimize the instrument for chlorinated dibenzo-p-dioxins (CDDs) and chlorinated dibenzofurans (CDFs) analysis is adaptable to other analytes.« less

The Multidimensional Assessment of Interoceptive Awareness (MAIA)

PubMed Central

Mehling, Wolf E.; Price, Cynthia; Daubenmier, Jennifer J.; Acree, Mike; Bartmess, Elizabeth; Stewart, Anita

2012-01-01

This paper describes the development of a multidimensional self-report measure of interoceptive body awareness. The systematic mixed-methods process involved reviewing the current literature, specifying a multidimensional conceptual framework, evaluating prior instruments, developing items, and analyzing focus group responses to scale items by instructors and patients of body awareness-enhancing therapies. Following refinement by cognitive testing, items were field-tested in students and instructors of mind-body approaches. Final item selection was achieved by submitting the field test data to an iterative process using multiple validation methods, including exploratory cluster and confirmatory factor analyses, comparison between known groups, and correlations with established measures of related constructs. The resulting 32-item multidimensional instrument assesses eight concepts. The psychometric properties of these final scales suggest that the Multidimensional Assessment of Interoceptive Awareness (MAIA) may serve as a starting point for research and further collaborative refinement. PMID:23133619

Research pressure instrumentation for NASA Space Shuttle main engine, modification no. 5

NASA Technical Reports Server (NTRS)

Anderson, P. J.; Nussbaum, P.; Gustafson, G.

1984-01-01

The purpose of Modification No. 5 of this contract is to expand the scope of work (Task C) of this research study effort to develop pressure instrumentation for the SSME. The objective of this contract (Task C) is to direct Honeywell's Solid State Electronics Division's (SSED) extensive experience and expertise in solid state sensor technology to develop prototype pressure transducers which are targeted to meet the SSME performance design goals and to fabricate, test and deliver a total of 10 prototype units. SSED's basic approach is to effectively utilize the many advantages of silicon piezoresistive strain sensing technology to achieve the objectives of advanced state-of-the-art pressure sensors in terms of reliability, accuracy and ease of manufacture. More specifically, integration of multiple functions on a single chip is the key attribute of this technology which will be exploited during this research study.

Acoustic buffeting by infrasound in a low vibration facility.

PubMed

MacLeod, B P; Hoffman, J E; Burke, S A; Bonn, D A

2016-09-01

Measurement instruments and fabrication tools with spatial resolution on the atomic scale require facilities that mitigate the impact of vibration sources in the environment. One approach to protection from vibration in a building's foundation is to place the instrument on a massive inertia block, supported on pneumatic isolators. This opens the questions of whether or not a massive floating block is susceptible to acoustic forces, and how to mitigate the effects of any such acoustic buffeting. Here this is investigated with quantitative measurements of vibrations and sound pressure, together with finite element modeling. It is shown that a particular concern, even in a facility with multiple acoustic enclosures, is the excitation of the lowest fundamental acoustic modes of the room by infrasound in the low tens of Hz range, and the efficient coupling of the fundamental room modes to a large inertia block centered in the room.

Magnetic induction tomography of objects for security applications

NASA Astrophysics Data System (ADS)

Ward, Rob; Joseph, Max; Langley, Abbi; Taylor, Stuart; Watson, Joe C.

2017-10-01

A coil array imaging system has been further developed from previous investigations, focusing on designing its application for fast screening of small bags or parcels, with a view to the production of a compact instrument for security applications. In addition to reducing image acquisition times, work was directed toward exploring potential cost effective manufacturing routes. Based on magnetic induction tomography and eddy-current principles, the instrument captured images of conductive targets using a lock-in amplifier, individually multiplexing signals between a primary driver coil and a 20 by 21 imaging array of secondary passive coils constructed using a reproducible multiple tile design. The design was based on additive manufacturing techniques and provided 2 orthogonal imaging planes with an ability to reconstruct images in less than 10 seconds. An assessment of one of the imaging planes is presented. This technique potentially provides a cost effective threat evaluation technique that may compliment conventional radiographic approaches.

Simultaneous control of multiple instruments at the Advanced Technology Solar Telescope

NASA Astrophysics Data System (ADS)

Johansson, Erik M.; Goodrich, Bret

2012-09-01

The Advanced Technology Solar Telescope (ATST) is a 4-meter solar observatory under construction at Haleakala, Hawaii. The simultaneous use of multiple instruments is one of the unique capabilities that makes the ATST a premier ground based solar observatory. Control of the instrument suite is accomplished by the Instrument Control System (ICS), a layer of software between the Observatory Control System (OCS) and the instruments. The ICS presents a single narrow interface to the OCS and provides a standard interface for the instruments to be controlled. It is built upon the ATST Common Services Framework (CSF), an infrastructure for the implementation of a distributed control system. The ICS responds to OCS commands and events, coordinating and distributing them to the various instruments while monitoring their progress and reporting the status back to the OCS. The ICS requires no specific knowledge about the instruments. All information about the instruments used in an experiment is passed by the OCS to the ICS, which extracts and forwards the parameters to the appropriate instrument controllers. The instruments participating in an experiment define the active instrument set. A subset of those instruments must complete their observing activities in order for the experiment to be considered complete and are referred to as the must-complete instrument set. In addition, instruments may participate in eavesdrop mode, outside of the control of the ICS. All instrument controllers use the same standard narrow interface, which allows new instruments to be added without having to modify the interface or any existing instrument controllers.

Development of a low-cost multiple diode PIV laser for high-speed flow visualization

NASA Astrophysics Data System (ADS)

Bhakta, Raj; Hargather, Michael

2017-11-01

Particle imaging velocimetry (PIV) is an optical visualization technique that typically incorporates a single high-powered laser to illuminate seeded particles in a fluid flow. Standard PIV lasers are extremely costly and have low frequencies that severely limit its capability in high speed, time-resolved imaging. The development of a multiple diode laser system consisting of continuous lasers allows for flexible high-speed imaging with a wider range of test parameters. The developed laser system was fabricated with off-the-shelf parts for approximately 500. A series of experimental tests were conducted to compare the laser apparatus to a standard Nd:YAG double-pulsed PIV laser. Steady and unsteady flows were processed to compare the two systems and validate the accuracy of the multiple laser design. PIV results indicate good correlation between the two laser systems and verifies the construction of a precise laser instrument. The key technical obstacle to this approach was laser calibration and positioning which will be discussed. HDTRA1-14-1-0070.

Software Architecture for a Virtual Environment for Nano Scale Assembly (VENSA).

PubMed

Lee, Yong-Gu; Lyons, Kevin W; Feng, Shaw C

2004-01-01

A Virtual Environment (VE) uses multiple computer-generated media to let a user experience situations that are temporally and spatially prohibiting. The information flow between the user and the VE is bidirectional and the user can influence the environment. The software development of a VE requires orchestrating multiple peripherals and computers in a synchronized way in real time. Although a multitude of useful software components for VEs exists, many of these are packaged within a complex framework and can not be used separately. In this paper, an architecture is presented which is designed to let multiple frameworks work together while being shielded from the application program. This architecture, which is called the Virtual Environment for Nano Scale Assembly (VENSA), has been constructed for interfacing with an optical tweezers instrument for nanotechnology development. However, this approach can be generalized for most virtual environments. Through the use of VENSA, the programmer can rely on existing solutions and concentrate more on the application software design.

Software Architecture for a Virtual Environment for Nano Scale Assembly (VENSA)

PubMed Central

Lee, Yong-Gu; Lyons, Kevin W.; Feng, Shaw C.

2004-01-01

A Virtual Environment (VE) uses multiple computer-generated media to let a user experience situations that are temporally and spatially prohibiting. The information flow between the user and the VE is bidirectional and the user can influence the environment. The software development of a VE requires orchestrating multiple peripherals and computers in a synchronized way in real time. Although a multitude of useful software components for VEs exists, many of these are packaged within a complex framework and can not be used separately. In this paper, an architecture is presented which is designed to let multiple frameworks work together while being shielded from the application program. This architecture, which is called the Virtual Environment for Nano Scale Assembly (VENSA), has been constructed for interfacing with an optical tweezers instrument for nanotechnology development. However, this approach can be generalized for most virtual environments. Through the use of VENSA, the programmer can rely on existing solutions and concentrate more on the application software design. PMID:27366610

Validation of continuous particle monitors for personal, indoor, and outdoor exposures.

PubMed

Wallace, Lance A; Wheeler, Amanda J; Kearney, Jill; Van Ryswyk, Keith; You, Hongyu; Kulka, Ryan H; Rasmussen, Pat E; Brook, Jeff R; Xu, Xiaohong

2011-01-01

Continuous monitors can be used to supplement traditional filter-based methods of determining personal exposure to air pollutants. They have the advantages of being able to identify nearby sources and detect temporal changes on a time scale of a few minutes. The Windsor Ontario Exposure Assessment Study (WOEAS) adopted an approach of using multiple continuous monitors to measure indoor, outdoor (near-residential) and personal exposures to PM₂.₅, ultrafine particles and black carbon. About 48 adults and households were sampled for five consecutive 24-h periods in summer and winter 2005, and another 48 asthmatic children for five consecutive 24-h periods in summer and winter 2006. This article addresses the laboratory and field validation of these continuous monitors. A companion article (Wheeler et al., 2010) provides similar analyses for the 24-h integrated methods, as well as providing an overview of the objectives and study design. The four continuous monitors were the DustTrak (Model 8520, TSI, St. Paul, MN, USA) and personal DataRAM (pDR) (ThermoScientific, Waltham, MA, USA) for PM₂.₅; the P-Trak (Model 8525, TSI) for ultrafine particles; and the Aethalometer (AE-42, Magee Scientific, Berkeley, CA, USA) for black carbon (BC). All monitors were tested in multiple co-location studies involving as many as 16 monitors of a given type to determine their limits of detection as well as bias and precision. The effect of concentration and electronic drift on bias and precision were determined from both the collocated studies and the full field study. The effect of rapid changes in environmental conditions on switching an instrument from indoor to outdoor sampling was also studied. The use of multiple instruments for outdoor sampling was valuable in identifying occasional poor performance by one instrument and in better determining local contributions to the spatial variation of particulate pollution. Both the DustTrak and pDR were shown to be in reasonable agreement (R² of 90 and 70%, respectively) with the gravimetric PM₂.₅ method. Both instruments had limits of detection of about 5 μg/m³. The DustTrak and pDR had multiplicative biases of about 2.5 and 1.6, respectively, compared with the gravimetric samplers. However, their average bias-corrected precisions were <10%, indicating that a proper correction for bias would bring them into very good agreement with standard methods. Although no standard methods exist to establish the bias of the Aethalometer and P-Trak, the precision was within 20% for the Aethalometer and within 10% for the P-Trak. These findings suggest that all four instruments can supply useful information in environmental studies.

Instrumental and Documentational Approaches: From Technology Use to Documentation Systems in University Mathematics Education

ERIC Educational Resources Information Center

Gueudet, Ghislaine; Buteau, Chantal; Mesa, Vilma; Misfeldt, Morten

2014-01-01

In this article we present an "instrumental approach" in mathematics education, which focuses on the interactions between students, teachers, and "artefacts." This approach analyses "mediations" attached to the use of a given artefact and "instruments" developed by the subjects from this artefact along…

14 CFR 125.325 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Instrument approach procedures and IFR landing minimums. 125.325 Section 125.325 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... make an instrument approach at an airport except in accordance with IFR weather minimums and unless the...

14 CFR 135.78 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Instrument approach procedures and IFR landing minimums. 135.78 Section 135.78 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... person may make an instrument approach at an airport except in accordance with IFR weather minimums and...

14 CFR 135.78 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Instrument approach procedures and IFR landing minimums. 135.78 Section 135.78 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... person may make an instrument approach at an airport except in accordance with IFR weather minimums and...

14 CFR 135.78 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Instrument approach procedures and IFR landing minimums. 135.78 Section 135.78 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... person may make an instrument approach at an airport except in accordance with IFR weather minimums and...

14 CFR 125.325 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Instrument approach procedures and IFR landing minimums. 125.325 Section 125.325 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... make an instrument approach at an airport except in accordance with IFR weather minimums and unless the...

14 CFR 135.78 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Instrument approach procedures and IFR landing minimums. 135.78 Section 135.78 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... person may make an instrument approach at an airport except in accordance with IFR weather minimums and...

14 CFR 125.325 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Instrument approach procedures and IFR landing minimums. 125.325 Section 125.325 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... make an instrument approach at an airport except in accordance with IFR weather minimums and unless the...

14 CFR 125.325 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Instrument approach procedures and IFR landing minimums. 125.325 Section 125.325 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... make an instrument approach at an airport except in accordance with IFR weather minimums and unless the...

14 CFR 125.325 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Instrument approach procedures and IFR landing minimums. 125.325 Section 125.325 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... make an instrument approach at an airport except in accordance with IFR weather minimums and unless the...

14 CFR 135.78 - Instrument approach procedures and IFR landing minimums.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Instrument approach procedures and IFR landing minimums. 135.78 Section 135.78 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... person may make an instrument approach at an airport except in accordance with IFR weather minimums and...

Model based approach to UXO imaging using the time domain electromagnetic method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lavely, E.M.

1999-04-01

Time domain electromagnetic (TDEM) sensors have emerged as a field-worthy technology for UXO detection in a variety of geological and environmental settings. This success has been achieved with commercial equipment that was not optimized for UXO detection and discrimination. The TDEM response displays a rich spatial and temporal behavior which is not currently utilized. Therefore, in this paper the author describes a research program for enhancing the effectiveness of the TDEM method for UXO detection and imaging. Fundamental research is required in at least three major areas: (a) model based imaging capability i.e. the forward and inverse problem, (b) detectormore » modeling and instrument design, and (c) target recognition and discrimination algorithms. These research problems are coupled and demand a unified treatment. For example: (1) the inverse solution depends on solution of the forward problem and knowledge of the instrument response; (2) instrument design with improved diagnostic power requires forward and inverse modeling capability; and (3) improved target recognition algorithms (such as neural nets) must be trained with data collected from the new instrument and with synthetic data computed using the forward model. Further, the design of the appropriate input and output layers of the net will be informed by the results of the forward and inverse modeling. A more fully developed model of the TDEM response would enable the joint inversion of data collected from multiple sensors (e.g., TDEM sensors and magnetometers). Finally, the author suggests that a complementary approach to joint inversions is the statistical recombination of data using principal component analysis. The decomposition into principal components is useful since the first principal component contains those features that are most strongly correlated from image to image.« less

A Stratified Study of Students' Understanding of Basic Optics Concepts in Different Contexts Using Two-Tier Multiple-Choice Items

ERIC Educational Resources Information Center

Chu, Hye-Eun; Treagust, David F.; Chandrasegaran, A. L.

2009-01-01

A large scale study involving 1786 year 7-10 Korean students from three school districts in Seoul was undertaken to evaluate their understanding of basic optics concepts using a two-tier multiple-choice diagnostic instrument consisting of four pairs of items, each of which evaluated the same concept in two different contexts. The instrument, which…

Multiple-User, Multitasking, Virtual-Memory Computer System

NASA Technical Reports Server (NTRS)

Generazio, Edward R.; Roth, Don J.; Stang, David B.

1993-01-01

Computer system designed and programmed to serve multiple users in research laboratory. Provides for computer control and monitoring of laboratory instruments, acquisition and anlaysis of data from those instruments, and interaction with users via remote terminals. System provides fast access to shared central processing units and associated large (from megabytes to gigabytes) memories. Underlying concept of system also applicable to monitoring and control of industrial processes.

Pilates exercise training vs. physical therapy for improving walking and balance in people with multiple sclerosis: a randomized controlled trial.

PubMed

Kalron, Alon; Rosenblum, Uri; Frid, Lior; Achiron, Anat

2017-03-01

Evaluate the effects of a Pilates exercise programme on walking and balance in people with multiple sclerosis and compare this exercise approach to conventional physical therapy sessions. Randomized controlled trial. Multiple Sclerosis Center, Sheba Medical Center, Tel-Hashomer, Israel. Forty-five people with multiple sclerosis, 29 females, mean age (SD) was 43.2 (11.6) years; mean Expanded Disability Status Scale (S.D) was 4.3 (1.3). Participants received 12 weekly training sessions of either Pilates ( n=22) or standardized physical therapy ( n=23) in an outpatient basis. Spatio-temporal parameters of walking and posturography parameters during static stance. Functional tests included the Time Up and Go Test, 2 and 6-minute walk test, Functional Reach Test, Berg Balance Scale and the Four Square Step Test. In addition, the following self-report forms included the Multiple Sclerosis Walking Scale and Modified Fatigue Impact Scale. At the termination, both groups had significantly increased their walking speed ( P=0.021) and mean step length ( P=0.023). According to the 2-minute and 6-minute walking tests, both groups at the end of the intervention program had increased their walking speed. Mean (SD) increase in the Pilates and physical therapy groups were 39.1 (78.3) and 25.3 (67.2) meters, respectively. There was no effect of group X time in all instrumented and clinical balance and gait measures. Pilates is a possible treatment option for people with multiple sclerosis in order to improve their walking and balance capabilities. However, this approach does not have any significant advantage over standardized physical therapy.

The NASA Icing Remote Sensing System

NASA Technical Reports Server (NTRS)

Reehorst, Andrew L.; Brinker, David J.; Ratvasky, Thomas P.; Ryerson, Charles C.; Koenig, George G.

2005-01-01

NASA and the U.S. Army Cold Regions Research and Engineering Laboratory (CRREL) have an on-going activity to develop remote sensing technologies for the detection and measurement of icing conditions aloft. A multiple instrument approach is the current emphasis of this activity. Utilizing radar, radiometry, and lidar, a region of supercooled liquid is identified. If the liquid water content (LWC) is sufficiently high, then the region of supercooled liquid cloud is flagged as being an aviation hazard. The instruments utilized for the current effort are an X-band vertical staring radar, a radiometer that measures twelve frequencies between 22 and 59 GHz, and a lidar ceilometer. The radar data determine cloud boundaries, the radiometer determines the sub-freezing temperature heights and total liquid water content, and the ceilometer refines the lower cloud boundary. Data are post-processed with a LabVIEW program with a resultant supercooled LWC profile and aircraft hazard identification. Remotely sensed measurements gathered during the 2003-2004 Alliance Icing Research Study (AIRS II) were compared to aircraft in-situ measurements. Although the comparison data set is quite small, the cases examined indicate that the remote sensing technique appears to be an acceptable approach.

A Pilot Study to Examine Maturation of Body Temperature Control in Preterm Infants

PubMed Central

Knobel, Robin B.; Levy, Janet; Katz, Laurence; Guenther, Bob; Holditch-Davis, Diane

2013-01-01

Objective To test instrumentation and develop analytic models to use in a larger study to examine developmental trajectories of body temperature and peripheral perfusion from birth in extremely low birth weight (EBLW) infants. Design A case study design. Setting The study took place in a level four neonatal intensive care unit (NICU) in North Carolina. Participants Four ELBW infants, less than 29 weeks gestational age at birth. Methods Physiologic data were measured every minute for the first 5 days of life: peripheral perfusion using perfusion index by Masimo and body temperature using thermistors. Body temperature was also measured using infrared thermal imaging. Stimulation and care events were recorded over the first 5 days using video which was coded with Noldus Observer software. Novel analytical models using the state space approach to time series analysis were developed to explore maturation of neural control over central and peripheral body temperature. Results/Conclusion Results from this pilot study confirmed the feasibility of using multiple instruments to measure temperature and perfusion in ELBW infants. This approach added rich data to our case study design and set a clinical context with which to interpret longitudinal physiological data. PMID:24004312

Utilization of the Differential Die-Away Self-Interrogation Technique for Characterization and Verification of Spent Nuclear Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trahan, Alexis Chanel

New nondestructive assay techniques are sought to better characterize spent nuclear fuel. One of the NDA instruments selected for possible deployment is differential die-away self-interrogation (DDSI). The proposed DDSI approach for spent fuel assembly assay utilizes primarily the spontaneous fission and (α, n) neutrons in the assemblies as an internal interrogating radiation source. The neutrons released in spontaneous fission or (α,n) reactions are thermalized in the surrounding water and induce fission in fissile isotopes, thereby creating a measurable signal from isotopes of interest that would be otherwise difficult to measure. The DDSI instrument employs neutron coincidence counting with 3He tubesmore » and list-mode-based data acquisition to allow for production of Rossi-alpha distributions (RADs) in post-processing. The list-mode approach to data collection and subsequent construction of RADs has expanded the analytical possibilities, as will be demonstrated throughout this thesis. One of the primary advantages is that the measured signal in the form of a RAD can be analyzed in its entirety including determination of die-away times in different time domains. This capability led to the development of the early die-away method, a novel leakage multiplication determination method which is tested throughout the thesis on different sources in simulation space and fresh fuel experiments. The early die-away method is a robust, accurate, improved method of determining multiplication without the need for knowledge of the (α,n) source term. The DDSI technique and instrument are presented along with the many novel capabilities enabled by and discovered through RAD analysis. Among the new capabilities presented are the early die-away method, total plutonium content determination, and highly sensitive missing pin detection. Simulation of hundreds of different spent and fresh fuel assemblies were used to develop the analysis algorithms and the techniques were tested on a variety of spontaneous fission-driven fresh fuel assemblies at Los Alamos National Laboratory and the BeRP ball at the Nevada National Security Site. The development of the new, improved analysis and characterization methods with the DDSI instrument makes it a viable technique for implementation in a facility to meet material control and safeguards needs.« less

A Pragmatic Path to Investigating Europa's Habitability

NASA Technical Reports Server (NTRS)

Pappalardo; Bengenal; Bar; Bills; Blankenship; Connerney; Kurth; McGrath; Moore; Prockter;

Design and evaluation of instrument approach procedure charts

DOT National Transportation Integrated Search

1993-01-01

A new format for instrument approach procedure : charts has been designed. Special attention was paid to : improving the readability of communication frequencies, : approach course heading and missed approach instructions. : Selected components of th...

Nanomechanical testing system

DOEpatents

Vodnick, David James; Dwivedi, Arpit; Keranen, Lucas Paul; Okerlund, Michael David; Schmitz, Roger William; Warren, Oden Lee; Young, Christopher David

2014-07-08

An automated testing system includes systems and methods to facilitate inline production testing of samples at a micro (multiple microns) or less scale with a mechanical testing instrument. In an example, the system includes a probe changing assembly for coupling and decoupling a probe of the instrument. The probe changing assembly includes a probe change unit configured to grasp one of a plurality of probes in a probe magazine and couple one of the probes with an instrument probe receptacle. An actuator is coupled with the probe change unit, and the actuator is configured to move and align the probe change unit with the probe magazine and the instrument probe receptacle. In another example, the automated testing system includes a multiple degree of freedom stage for aligning a sample testing location with the instrument. The stage includes a sample stage and a stage actuator assembly including translational and rotational actuators.

Nanomechanical testing system

DOEpatents

Vodnick, David James; Dwivedi, Arpit; Keranen, Lucas Paul; Okerlund, Michael David; Schmitz, Roger William; Warren, Oden Lee; Young, Christopher David

2015-01-27

An automated testing system includes systems and methods to facilitate inline production testing of samples at a micro (multiple microns) or less scale with a mechanical testing instrument. In an example, the system includes a probe changing assembly for coupling and decoupling a probe of the instrument. The probe changing assembly includes a probe change unit configured to grasp one of a plurality of probes in a probe magazine and couple one of the probes with an instrument probe receptacle. An actuator is coupled with the probe change unit, and the actuator is configured to move and align the probe change unit with the probe magazine and the instrument probe receptacle. In another example, the automated testing system includes a multiple degree of freedom stage for aligning a sample testing location with the instrument. The stage includes a sample stage and a stage actuator assembly including translational and rotational actuators.

Nanomechanical testing system

DOEpatents

Vodnick, David James; Dwivedi, Arpit; Keranen, Lucas Paul; Okerlund, Michael David; Schmitz, Roger William; Warren, Oden Lee; Young, Christopher David

2015-02-24

An automated testing system includes systems and methods to facilitate inline production testing of samples at a micro (multiple microns) or less scale with a mechanical testing instrument. In an example, the system includes a probe changing assembly for coupling and decoupling a probe of the instrument. The probe changing assembly includes a probe change unit configured to grasp one of a plurality of probes in a probe magazine and couple one of the probes with an instrument probe receptacle. An actuator is coupled with the probe change unit, and the actuator is configured to move and align the probe change unit with the probe magazine and the instrument probe receptacle. In another example, the automated testing system includes a multiple degree of freedom stage for aligning a sample testing location with the instrument. The stage includes a sample stage and a stage actuator assembly including translational and rotational actuators.

Development and validation of the coronary heart disease scale under the system of quality of life instruments for chronic diseases QLICD-CHD: combinations of classical test theory and Generalizability Theory.

PubMed

Wan, Chonghua; Li, Hezhan; Fan, Xuejin; Yang, Ruixue; Pan, Jiahua; Chen, Wenru; Zhao, Rong

2014-06-04

Quality of life (QOL) for patients with coronary heart disease (CHD) is now concerned worldwide with the specific instruments being seldom and no one developed by the modular approach. This paper is aimed to develop the CHD scale of the system of Quality of Life Instruments for Chronic Diseases (QLICD-CHD) by the modular approach and validate it by both classical test theory and Generalizability Theory. The QLICD-CHD was developed based on programmed decision procedures with multiple nominal and focus group discussions, in-depth interview, pre-testing and quantitative statistical procedures. 146 inpatients with CHD were used to provide the data measuring QOL three times before and after treatments. The psychometric properties of the scale were evaluated with respect to validity, reliability and responsiveness employing correlation analysis, factor analyses, multi-trait scaling analysis, t-tests and also G studies and D studies of Genralizability Theory analysis. Multi-trait scaling analysis, correlation and factor analyses confirmed good construct validity and criterion-related validity when using SF-36 as a criterion. The internal consistency α and test-retest reliability coefficients (Pearson r and Intra-class correlations ICC) for the overall instrument and all domains were higher than 0.70 and 0.80 respectively; The overall and all domains except for social domain had statistically significant changes after treatments with moderate effect size SRM (standardized response mea) ranging from 0.32 to 0.67. G-coefficients and index of dependability (Ф coefficients) confirmed the reliability of the scale further with more exact variance components. The QLICD-CHD has good validity, reliability, and moderate responsiveness and some highlights, and can be used as the quality of life instrument for patients with CHD. However, in order to obtain better reliability, the numbers of items for social domain should be increased or the items' quality, not quantity, should be improved.

Developing a Passive Acoustic Monitoring Network for Harbor Porpoise in California

NASA Astrophysics Data System (ADS)

Jacobson, Eiren Kate

Assessing the abundance of and trends in whale, dolphin, and porpoise (cetacean) populations using traditional visual methods can be challenging due primarily to their limited availability at the surface of the ocean. As a result, researchers are increasingly interested in incorporating non-visual and remote observations to improve cetacean population assessments. Passive acoustic monitoring (PAM) can complement or replace visual surveys for cetaceans that produce echolocation clicks, whistles, and other vocalizations. My doctoral dissertation is focused on developing methods to improve PAM of cetaceans. I used the Monterey Bay population of harbor porpoise (Phocoena phocoena ) as a case study for methods development. In Chapter 2, I used passive acoustic data to document that harbor porpoises avoid bottlenose dolphins (Tursiops truncatus) in nearshore Monterey Bay. In Chapter 3, I investigated whether different passive acoustic instruments could be used to monitor harbor porpoise. I recorded harbor porpoise echolocation clicks simultaneously on two different passive acoustic instruments and compared the number and peak frequency of echolocation signals recorded on the two instruments. I found that the number of echolocation clicks was highly correlated between instruments but that the peak frequency of echolocation clicks was not well-correlated, suggesting that some instruments may not be capable of discriminating harbor porpoise echolocation clicks in regions where multiple species with similar echolocation signals are present. In Chapter 4, I used paired visual and passive acoustic surveys to estimate the effective detection area of the passive acoustic sensors in a Bayesian framework. This approach resulted in a posterior distribution of the effective detection area that was consistent with previously published values. In Chapter 5, I used aerial survey and passive acoustic data in a simulation framework to investigate the statistical power of different passive acoustic network designs and hypothetical changes in harbor porpoise abundance. As a whole, this dissertation used an applied approach to methods development to advance the use of PAM for cetaceans.

Surmounting a PCR challenge using a Contradictory matrix from the Theory of Inventive Problem Solving (TRIZ).

PubMed

Drábek, Jiří

2016-01-01

In this paper I tested whether Contradictory Matrix with 40 Inventive Principles, the simplest instrument from the Theory of Inventive Problem Solving (TRIZ), is a useful approach to a real-life PCR scenario. The PCR challenge consisted of standardization of fluorescence melting curve measurements in Competitive Amplification of Differentially Melting Amplicons (CADMA) PCR for multiple targets. Here I describe my way of using the TRIZ Matrix to generate seven alternative solutions from which I can choose the successful solution, consisting of repeated cycles of amplification and melting in a single PCR run.

The X-33 Extended Flight Test Range

NASA Technical Reports Server (NTRS)

Mackall, Dale A.; Sakahara, Robert; Kremer, Steven E.

1998-01-01

Development of an extended test range, with range instrumentation providing continuous vehicle communications, is required to flight-test the X-33, a scaled version of a reusable launch vehicle. The extended test range provides vehicle communications coverage from California to landing at Montana or Utah. This paper provides an overview of the approaches used to meet X-33 program requirements, including using multiple ground stations, and methods to reduce problems caused by reentry plasma radio frequency blackout. The advances used to develop the extended test range show other hypersonic and access-to-space programs can benefit from the development of the extended test range.

Modeling surface topography of state-of-the-art x-ray mirrors as a result of stochastic polishing process: recent developments

NASA Astrophysics Data System (ADS)

Yashchuk, Valeriy V.; Centers, Gary; Tyurin, Yuri N.; Tyurina, Anastasia

2016-09-01

Recently, an original method for the statistical modeling of surface topography of state-of-the-art mirrors for usage in xray optical systems at light source facilities and for astronomical telescopes [Opt. Eng. 51(4), 046501, 2012; ibid. 53(8), 084102 (2014); and ibid. 55(7), 074106 (2016)] has been developed. In modeling, the mirror surface topography is considered to be a result of a stationary uniform stochastic polishing process and the best fit time-invariant linear filter (TILF) that optimally parameterizes, with limited number of parameters, the polishing process is determined. The TILF model allows the surface slope profile of an optic with a newly desired specification to be reliably forecast before fabrication. With the forecast data, representative numerical evaluations of expected performance of the prospective mirrors in optical systems under development become possible [Opt. Eng., 54(2), 025108 (2015)]. Here, we suggest and demonstrate an analytical approach for accounting the imperfections of the used metrology instruments, which are described by the instrumental point spread function, in the TILF modeling. The efficacy of the approach is demonstrated with numerical simulations for correction of measurements performed with an autocollimator based surface slope profiler. Besides solving this major metrological problem, the results of the present work open an avenue for developing analytical and computational tools for stitching data in the statistical domain, obtained using multiple metrology instruments measuring significantly different bandwidths of spatial wavelengths.

NASA Tech Briefs, November 2004

NASA Technical Reports Server (NTRS)

2004-01-01

Topics include: Multifunction Imaging and Spectroscopic Instrument; Position-Finding Instrument Built Around a Magnetometer; Improved Measurement of Dispersion in an Optical Fiber; Probe for Sampling of Interstitial Fluid From Bone; Neuropsychological Testing of Astronauts; Method of Calibration for a Large Cathetometer System; Four-Channel PC/104 MIL-STD-1553 Circuit Board; Improved Method of Locating Defects in Wiring Insulation; Strobe Traffic Lights Warn of Approaching Emergency Vehicles; Improved Timing Scheme for Spaceborne Precipitation Radar; Concept for Multiple-Access Free-Space Laser Communications; Variable Shadow Screens for Imaging Optical Devices; Verifying Diagnostic Software; Initial Processing of Infrared Spectral Data; Activity-Centric Approach to Distributed Programming; Controlling Distributed Planning; New Material for Surface-Enhanced Raman Spectroscopy; Treated Carbon Nanofibers for Storing Energy in Aqueous KOH; Advanced Infant Car Seat Would Increase Highway Safety; Development of Biomorphic Flyers; Second-Generation Six-Limbed Experimental Robot; Miniature Linear Actuator for Small Spacecraft; Process for Making Single-Domain Magnetite Crystals; A New Process for Fabricating Random Silicon Nanotips; Resin-Transfer-Molding of a Tool Face; Improved Phase-Mask Fabrication of Fiber Bragg Gratings; Tool for Insertion of a Fiber-Optic Terminus in a Connector; Nanofluidic Size-Exclusion Chromatograph; Lightweight, Low-CTE Tubes Made From Biaxially Oriented LCPs; Using Redundancy To Reduce Errors in Magnetometer Readings; Compact Instrument for Measuring Profile of a Light Beam; Multilayer Dielectric Transmissive Optical Phase Modulator; Second-Generation Multi-Angle Imaging Spectroradiometer; Real-Time Adaptive Color Segmentation by Neural Networks; Research and Development in Optical Communications; Tests of Multibeam Scintillation Mitigation on Laser Uplinks; and Spaceborne Infrared Atmospheric Sounder.

Procurement of Shared Data Instruments for Research Electronic Data Capture (REDCap)

PubMed Central

Obeid, Jihad S; McGraw, Catherine A; Minor, Brenda L; Conde, José G; Pawluk, Robert; Lin, Michael; Wang, Janey; Banks, Sean R; Hemphill, Sheree A; Taylor, Rob; Harris, Paul A

2012-01-01

REDCap (Research Electronic Data Capture) is a web-based software solution and tool set that allows biomedical researchers to create secure online forms for data capture, management and analysis with minimal effort and training. The Shared Data Instrument Library (SDIL) is a relatively new component of REDCap that allows sharing of commonly used data collection instruments for immediate study use by 3 research teams. Objectives of the SDIL project include: 1) facilitating reuse of data dictionaries and reducing duplication of effort; 2) promoting the use of validated data collection instruments, data standards and best practices; and 3) promoting research collaboration and data sharing. Instruments submitted to the library are reviewed by a library oversight committee, with rotating membership from multiple institutions, which ensures quality, relevance and legality of shared instruments. The design allows researchers to download the instruments in a consumable electronic format in the REDCap environment. At the time of this writing, the SDIL contains over 128 data collection instruments. Over 2500 instances of instruments have been downloaded by researchers at multiple institutions. In this paper we describe the library platform, provide detail about experience gained during the first 25 months of sharing public domain instruments and provide evidence of impact for the SDIL across the REDCap consortium research community. We postulate that the shared library of instruments reduces the burden of adhering to sound data collection principles while promoting best practices. PMID:23149159

Description of the AILS Alerting Algorithm

NASA Technical Reports Server (NTRS)

Samanant, Paul; Jackson, Mike

2000-01-01

This document provides a complete description of the Airborne Information for Lateral Spacing (AILS) alerting algorithms. The purpose of AILS is to provide separation assurance between aircraft during simultaneous approaches to closely spaced parallel runways. AILS will allow independent approaches to be flown in such situations where dependent approaches were previously required (typically under Instrument Meteorological Conditions (IMC)). This is achieved by providing multiple levels of alerting for pairs of aircraft that are in parallel approach situations. This document#s scope is comprehensive and covers everything from general overviews, definitions, and concepts down to algorithmic elements and equations. The entire algorithm is presented in complete and detailed pseudo-code format. This can be used by software programmers to program AILS into a software language. Additional supporting information is provided in the form of coordinate frame definitions, data requirements, calling requirements as well as all necessary pre-processing and post-processing requirements. This is important and required information for the implementation of AILS into an analysis, a simulation, or a real-time system.

Solar Wind Properties During Juno's Approach to Jupiter: Data Analysis and Resulting Plasma Properties Utilizing a 1-D Forward Model

NASA Astrophysics Data System (ADS)

Wilson, R. J.; Bagenal, Fran; Valek, Philip W.; McComas, D. J.; Allegrini, Frederic; Ebert, Robert W.; Kim, Thomas K.; Kurth, W. S.; Szalay, Jamey R.; Thomsen, Michelle F.

2018-04-01

The Jovian Auroral Distributions Experiment ion sensor (JADE-I) on board the National Aeronautics and Space Administration's Juno mission measured solar wind ions for ≈40 days prior to the spacecraft's arrival at Jupiter, simultaneous with numerous telescope observations of the Jovian aurora. JADE-I is a thermal plasma time-of-flight instrument designed to measure Jovian auroral and magnetospheric ions. This study provides a solar wind parameter data set for the approach phase that may be used in coordinated studies with remote measurements of the Jovian aurora, to compare with models that propagate solar wind conditions from Earth and to apply to Jovian bow shock or magnetopause models. While multiple bow shock crossings were predicted during Juno's approach, there was only one observed suggesting a compressed magnetosphere that was shrinking as Juno approached. However, the calculated ram pressure at the bow shock was near the median value of those 40 days, rather than being in an upper percentile.

Management Approach for Earth Venture Instrument

NASA Technical Reports Server (NTRS)

Hope, Diane L.; Dutta, Sanghamitra

2013-01-01

The Earth Venture Instrument (EVI) element of the Earth Venture Program calls for developing instruments for participation on a NASA-arranged spaceflight mission of opportunity to conduct innovative, integrated, hypothesis or scientific question-driven approaches to pressing Earth system science issues. This paper discusses the EVI element and the management approach being used to manage both an instrument development activity as well as the host accommodations activity. In particular the focus will be on the approach being used for the first EVI (EVI-1) selected instrument, Tropospheric Emissions: Monitoring of Pollution (TEMPO), which will be hosted on a commercial GEO satellite and some of the challenges encountered to date and corresponding mitigations that are associated with the management structure for the TEMPO Mission and the architecture of EVI.

Assessment of Airborne Instrument Uncertainty via Measurement Comparisons Conducted During the DC3 and SEAC4RS Field Campaigns

NASA Astrophysics Data System (ADS)

Silverman, M. L.; Chen, G.; Shook, M.

2016-12-01

Airborne field campaigns have long understood the importance of well-defined measurement uncertainties and their impact on scientific research. Measurement comparisons are an effective way to assess the uncertainty of different techniques as well as gain insight into instrument performance. As part of the NASA DC3 (Deep Convective Clouds and Chemistry) airborne field campaign, there were several wing-tip-to-wing-tip formation flight segments designed for measurement comparison of the instruments onboard the NASA DC-8 and NSF/NCAR Gulfstream-V aircraft. This provides the opportunity to evaluate the consistency between multiple measurements of the same species/parameters on different platforms and based on different measurement techniques. The DC-8 aircraft was also instrumented with duplicate measurements of the same species, allowing for intraplatform comparisons. The NASA DC-8 was also used during the NASA SEAC4RS (Studies of Emission and Atmospheric Composition, Clouds, and Climate Coupling by Regional Surveys) airborne field campaign. While no wing-tip to wing-tip flights were flown, several instruments measuring the same species were aboard the DC-8 providing intraplatform comparisons. Time series and correlations are produced to show the relative agreement between the measurements both on a daily basis and over the course of the five inter-comparison days. We have also used a data-driven approach to analyze the instrument precisions as an important part of measurement uncertainty assessment. By conducting these analyses we provide insight to users on the quality of the measurements.

Mercury-Cadmium-Telluride Focal Plane Array Performance Under Non-Standard Operating Conditions

NASA Technical Reports Server (NTRS)

Richardson, Brandon S.; Eastwood, Michael L.; Bruce, Carl F.; Green, Robert O.; Coles, J. B.

2011-01-01

This paper highlights a new technique that allows the Teledyne Scientific & Imaging LLC TCM6604A Mercury-Cadmium-Telluride (MCT) Focal Plane Array (FPA) to operate at room temperature. The Teledyne MCT FPA has been a standard in Imaging Spectroscopy since its creation in the 1980's. This FPA has been used in applications ranging from space instruments such as CRISM, M3 and ARTEMIS to airborne instruments such as MaRS and the Next Generation AVIRIS Instruments1. Precise focal plane alignment is always a challenge for such instruments. The current FPA alignment process results in multiple cold cycles requiring week-long durations, thereby increasing the risk and cost of a project. These alignment cycles are necessary because optimal alignment is approached incrementally and can only be measured with the FPA and Optics at standard operating conditions, requiring a cold instrument. Instruments using this FPA are normally cooled to temperatures below 150K for the MCT FPA to properly function. When the FPA is run at higher temperatures the dark current increases saturating the output. This paper covers the prospect of warm MCT FPA operation from a theoretical and experimental perspective. We discuss the empirical models and physical laws that govern MCT material properties and predict the optimal settings that will result in the best MCT PA performance at 300K. Theoretical results are then calculated for the proposed settings. We finally present the images and data obtained using the actual system with the warm MCT FPA settings. The paper concludes by emphasizing the strong positive correlation between the measured values and the theoretical results.

vECTlab—A fully integrated multi-modality Monte Carlo simulation framework for the radiological imaging sciences

NASA Astrophysics Data System (ADS)

Peter, Jörg; Semmler, Wolfhard

2007-10-01

Alongside and in part motivated by recent advances in molecular diagnostics, the development of dual-modality instruments for patient and dedicated small animal imaging has gained attention by diverse research groups. The desire for such systems is high not only to link molecular or functional information with the anatomical structures, but also for detecting multiple molecular events simultaneously at shorter total acquisition times. While PET and SPECT have been integrated successfully with X-ray CT, the advance of optical imaging approaches (OT) and the integration thereof into existing modalities carry a high application potential, particularly for imaging small animals. A multi-modality Monte Carlo (MC) simulation approach at present has been developed that is able to trace high-energy (keV) as well as optical (eV) photons concurrently within identical phantom representation models. We show that the involved two approaches for ray-tracing keV and eV photons can be integrated into a unique simulation framework which enables both photon classes to be propagated through various geometry models representing both phantoms and scanners. The main advantage of such integrated framework for our specific application is the investigation of novel tomographic multi-modality instrumentation intended for in vivo small animal imaging through time-resolved MC simulation upon identical phantom geometries. Design examples are provided for recently proposed SPECT-OT and PET-OT imaging systems.

Interventions for older persons reporting memory difficulties: a randomized controlled pilot study.

PubMed

Cohen-Mansfield, Jiska; Cohen, Rinat; Buettner, Linda; Eyal, Nitza; Jakobovits, Hanna; Rebok, George; Rotenberg-Shpigelman, Shlomit; Sternberg, Shelley

2015-05-01

The objective of this study is to compare three different interventions for persons who report memory difficulties: health promotion, cognitive training, and a participation-centered course, using a single-blind, randomized controlled design. Participants were 44 Israeli adults with memory complaints, aged 65 years or older. The main outcome variable was the Global Cognitive Score assessed using the MindStreams(®) mild cognitive impairment assessment, a computerized cognitive assessment. The Mini-Mental State Examination and the self-report of memory difficulties were also utilized. To assess well-being, the UCLA Loneliness Scale-8 was used. Health was evaluated by self-report instruments. All three interventions resulted in significant improvement in cognitive function as measured by the computerized cognitive assessment. All approaches seemed to decrease loneliness. The only variable which showed a significant difference among the groups is the self-report of memory difficulties, in which the cognitive training group participants reported greater improvement than the other groups. Multiple approaches should be offered to older persons with memory complaints. The availability of diverse options would help fit the needs of a heterogeneous population. An educational media effort to promote the public's understanding of the efficacy of these multiple approaches is needed. Copyright © 2014 John Wiley & Sons, Ltd.

Theoretical and Experimental Studies of Epidermal Heat Flux Sensors for Measurements of Core Body Temperature.

PubMed

Zhang, Yihui; Webb, Richard Chad; Luo, Hongying; Xue, Yeguang; Kurniawan, Jonas; Cho, Nam Heon; Krishnan, Siddharth; Li, Yuhang; Huang, Yonggang; Rogers, John A

2016-01-07

Long-term, continuous measurement of core body temperature is of high interest, due to the widespread use of this parameter as a key biomedical signal for clinical judgment and patient management. Traditional approaches rely on devices or instruments in rigid and planar forms, not readily amenable to intimate or conformable integration with soft, curvilinear, time-dynamic, surfaces of the skin. Here, materials and mechanics designs for differential temperature sensors are presented which can attach softly and reversibly onto the skin surface, and also sustain high levels of deformation (e.g., bending, twisting, and stretching). A theoretical approach, together with a modeling algorithm, yields core body temperature from multiple differential measurements from temperature sensors separated by different effective distances from the skin. The sensitivity, accuracy, and response time are analyzed by finite element analyses (FEA) to provide guidelines for relationships between sensor design and performance. Four sets of experiments on multiple devices with different dimensions and under different convection conditions illustrate the key features of the technology and the analysis approach. Finally, results indicate that thermally insulating materials with cellular structures offer advantages in reducing the response time and increasing the accuracy, while improving the mechanics and breathability. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Addressing continuous data measured with different instruments for participants excluded from trial analysis: a guide for systematic reviewers.

PubMed

Ebrahim, Shanil; Johnston, Bradley C; Akl, Elie A; Mustafa, Reem A; Sun, Xin; Walter, Stephen D; Heels-Ansdell, Diane; Alonso-Coello, Pablo; Guyatt, Gordon H

2014-05-01

We previously developed an approach to address the impact of missing participant data in meta-analyses of continuous variables in trials that used the same measurement instrument. We extend this approach to meta-analyses including trials that use different instruments to measure the same construct. We reviewed the available literature, conducted an iterative consultative process, and developed an approach involving a complete-case analysis complemented by sensitivity analyses that apply a series of increasingly stringent assumptions about results in patients with missing continuous outcome data. Our approach involves choosing the reference measurement instrument; converting scores from different instruments to the units of the reference instrument; developing four successively more stringent imputation strategies for addressing missing participant data; calculating a pooled mean difference for the complete-case analysis and imputation strategies; calculating the proportion of patients who experienced an important treatment effect; and judging the impact of the imputation strategies on the confidence in the estimate of effect. We applied our approach to an example systematic review of respiratory rehabilitation for chronic obstructive pulmonary disease. Our extended approach provides quantitative guidance for addressing missing participant data in systematic reviews of trials using different instruments to measure the same construct. Copyright © 2014 Elsevier Inc. All rights reserved.

Technology Advancement for Active Remote Sensing of Carbon Dioxide from Space Using the ASCENDS CarbonHawk Experiment Simulator: First Results

NASA Technical Reports Server (NTRS)

Obland, Michael D.; Nehrir, Amin R.; Lin, Bing; Harrison, F. Wallace; Kooi, Susan; Choi, Yonghoon; Plant, James; Yang, Melissa; Antill, Charles; Campbell, Joel;

78 FR 72393 - Net Investment Income Tax

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-02

...) a trade or business of trading in financial instruments or commodities (as defined in section 475(e... trading in financial instruments or commodities. Multiple commentators suggested that the final...

Current Issues in the Design and Information Content of Instrument Approach Charts

DOT National Transportation Integrated Search

1995-03-01

This report documents an analysis and interview effort conducted to identify common operational errors made using : current Instrument Approach Plates (IAP), Standard Terminal Arrival Route (STAR) charts. Standard Instrument Departure : (SID) charts,...

Synchronized Survey Scan Approach Allows for Efficient Discrimination of Isomeric and Isobaric Compounds during LC-MS/MS Analyses

PubMed Central

Masike, Keabetswe

2018-01-01

Liquid chromatography-mass spectrometry- (LC-MS-) based multiple reaction monitoring (MRM) methods have been used to detect and quantify metabolites for years. These approaches rely on the monitoring of various fragmentation pathways of multiple precursors and the subsequent corresponding product ions. However, MRM methods are incapable of confidently discriminating between isomeric and isobaric molecules and, as such, the development of methods capable of overcoming this challenge has become imperative. Due to increasing scanning rates of recent MS instruments, it is now possible to operate MS instruments both in the static and dynamic modes. One such method is known as synchronized survey scan (SSS), which is capable of acquiring a product ion scan (PIS) during MRM analysis. The current study shows, for the first time, the use of SSS-based PIS approach as a feasible identification feature of MRM. To achieve the above, five positional isomers of dicaffeoylquinic acids (diCQAs) were studied with the aid of SSS-based PIS method. Here, the MRM transitions were automatically optimized using a 3,5-diCQA isomer by monitoring fragmentation transitions common to all five isomers. Using the mixture of these isomers, fragmentation spectra of the five isomers achieved with SSS-based PIS were used to identify each isomer based on previously published hierarchical fragmentation keys. The optimized method was also used to detect and distinguish between diCQA components found in Bidens pilosa and their isobaric counterparts found in Moringa oleifera plants. Thus, the method was shown to distinguish (by differences in fragmentation patterns) between diCQA and their isobars, caffeoylquinic acid (CQA) glycosides. In conclusion, SSS allowed the detection and discrimination of isomeric and isobaric compounds in a single chromatographic run by producing a PIS spectrum, triggered in the automatic MS/MS synchronized survey scan mode. PMID:29805830

Strings in General Music: An Experience with Multiple Sequencing

ERIC Educational Resources Information Center

Martin, Jeffrey

2012-01-01

Instrumental performance that approximates real-world models is one way in which a general music curriculum can encourage high levels of engagement and potential for lifelong musical activity. Although guitars, keyboards, and various folk instruments are useful for this purpose, orchestral instruments can also provide significant solo and ensemble…

Choice and Effects of Instrument Sound in Aural Training

ERIC Educational Resources Information Center

Loh, Christian Sebastian

2007-01-01

A musical note produced through the vibration of a single string is psychoacoustically simpler/purer than that produced via multiple-strings vibration. Does the psychoacoustics of instrument sound have any effect on learning outcomes in music instruction? This study investigated the effect of two psychoacoustically distinct instrument sounds on…

Radiometric Measurement Comparisons Using Transfer Radiometers in Support of the Calibration of NASA's Earth Observing System (EOS) Sensors

NASA Technical Reports Server (NTRS)

Butler, James J.; Johnson, B. Carol; Brown, Steven W.; Yoon, Howard W.; Barnes, Robert A.; Markham, Brian L.; Biggar, Stuart F.; Zalewski, Edward F.; Spyak, Paul R.; Cooper, John W.;

The Concept Mastery in the Perspective of Gender of Junior High School Students on Eclipse Theme in Multiple Intelligences-based of Integrated Earth and Space Science Learning

NASA Astrophysics Data System (ADS)

Liliawati, W.; Utama, J. A.; Mursydah, L. S.

2017-03-01

The purpose of this study is to identify gender-based concept mastery differences of junior high school students after the implementation of multiple intelligences-based integrated earth and space science learning. Pretest-posttest group design was employed to two different classes at one of junior high school on eclipse theme in Tasikmalaya West Java: one class for boys (14 students) and one class of girls (18 students). The two-class received same treatment. The instrument of concepts mastery used in this study was open-ended eight essay questions. Reliability test result of this instrument was 0.9 (category: high) while for validity test results were high and very high category. We used instruments of multiple intelligences identification and learning activity observation sheet for our analysis. The results showed that normalized N-gain of concept mastery for boys and girls were improved, respectively 0.39 and 0.65. Concept mastery for both classes differs significantly. The dominant multiple intelligences for boys were in kinesthetic while girls dominated in the rest of multiple intelligences. Therefor we concluded that the concept mastery was influenced by gender and student’s multiple intelligences. Based on this finding we suggested to considering the factor of gender and students’ multiple intelligences given in the learning activity.

Building the BIKE: Development and Testing of the Biotechnology Instrument for Knowledge Elicitation (BIKE)

NASA Astrophysics Data System (ADS)

Witzig, Stephen B.; Rebello, Carina M.; Siegel, Marcelle A.; Freyermuth, Sharyn K.; Izci, Kemal; McClure, Bruce

2014-10-01

Identifying students' conceptual scientific understanding is difficult if the appropriate tools are not available for educators. Concept inventories have become a popular tool to assess student understanding; however, traditionally, they are multiple choice tests. International science education standard documents advocate that assessments should be reform based, contain diverse question types, and should align with instructional approaches. To date, no instrument of this type targeting student conceptions in biotechnology has been developed. We report here the development, testing, and validation of a 35-item Biotechnology Instrument for Knowledge Elicitation (BIKE) that includes a mix of question types. The BIKE was designed to elicit student thinking and a variety of conceptual understandings, as opposed to testing closed-ended responses. The design phase contained nine steps including a literature search for content, student interviews, a pilot test, as well as expert review. Data from 175 students over two semesters, including 16 student interviews and six expert reviewers (professors from six different institutions), were used to validate the instrument. Cronbach's alpha on the pre/posttest was 0.664 and 0.668, respectively, indicating the BIKE has internal consistency. Cohen's kappa for inter-rater reliability among the 6,525 total items was 0.684 indicating substantial agreement among scorers. Item analysis demonstrated that the items were challenging, there was discrimination among the individual items, and there was alignment with research-based design principles for construct validity. This study provides a reliable and valid conceptual understanding instrument in the understudied area of biotechnology.

Multiple-Path-Length Optical Absorbance Cell

NASA Technical Reports Server (NTRS)

2001-01-01

An optical absorbance cell that offers a selection of multiple optical path lengths has been developed as part of a portable spectrometric instrument that measures absorption spectra of small samples of water and that costs less than does a conventional, non-portable laboratory spectrometer. The instrument is intended, more specifically, for use in studying colored dissolved organic matter (CDOM) in seawater, especially in coastal regions. Accurate characterization of CDOM is necessary for building bio-optical mathematical models of seawater. The multiple path lengths of the absorption cell afford a wide range of sensitivity needed for measuring the optical absorbances associated with the wide range of concentrations of CDOM observed in nature. The instrument operates in the wavelength range of 370 to 725 nm. The major subsystems of the instrument (see figure) include a color-balanced light source; the absorption cell; a peristaltic pump; a high-precision, low-noise fiber optic spectrometer; and a laptop or other personal computer. A fiber-optic cable transmits light from the source to the absorption cell. Other optical fibers transmit light from the absorption cell to the spectrometer,

A simulator evaluation of an automatic terminal approach system

NASA Technical Reports Server (NTRS)

Hinton, D. A.

1983-01-01

The automatic terminal approach system (ATAS) is a concept for improving the pilot/machine interface with cockpit automation. The ATAS can automatically fly a published instrument approach by using stored instrument approach data to automatically tune airplane avionics, control the airplane's autopilot, and display status information to the pilot. A piloted simulation study was conducted to determine the feasibility of an ATAS, determine pilot acceptance, and examine pilot/ATAS interaction. Seven instrument-rated pilots each flew four instrument approaches with a base-line heading select autopilot mode. The ATAS runs resulted in lower flight technical error, lower pilot workload, and fewer blunders than with the baseline autopilot. The ATAS status display enabled the pilots to maintain situational awareness during the automatic approaches. The system was well accepted by the pilots.

Quantitative Analysis of Transnasal Anterior Skull Base Approach: Report of Technology for Intraoperative Assessment of Instrument Motion.

PubMed

Berens, Angelique M; Harbison, Richard Alex; Li, Yangming; Bly, Randall A; Aghdasi, Nava; Ferreira, Manuel; Hannaford, Blake; Moe, Kris S

2017-08-01

To develop a method to measure intraoperative surgical instrument motion. This model will be applicable to the study of surgical instrument kinematics including surgical training, skill verification, and the development of surgical warning systems that detect aberrant instrument motion that may result in patient injury. We developed an algorithm to automate derivation of surgical instrument kinematics in an endoscopic endonasal skull base surgery model. Surgical instrument motion was recorded during a cadaveric endoscopic transnasal approach to the pituitary using a navigation system modified to record intraoperative time-stamped Euclidian coordinates and Euler angles. Microdebrider tip coordinates and angles were referenced to the cadaver's preoperative computed tomography scan allowing us to assess surgical instrument kinematics over time. A representative cadaveric endoscopic endonasal approach to the pituitary was performed to demonstrate feasibility of our algorithm for deriving surgical instrument kinematics. Technical feasibility of automatically measuring intraoperative surgical instrument motion and deriving kinematics measurements was demonstrated using standard navigation equipment.

Unattended Multiplicity Shift Register

DOE Office of Scientific and Technical Information (OSTI.GOV)

Newell, Matt; Jones, David C.

2017-01-16

The Unattended Multiplicity Shift Register (UMSR) is a specialized pulse counter used primarily to count neutron events originating in neutron detection instruments. While the counter can be used to count any TTL input pulses, its unique ability to record time correlated events and the multiplicity distributions of these events makes it an ideal instrument for counting neutron events in the nuclear fields of material safeguards, waste assay and process monitoring and control. The UMSR combines the Los Alamos National Laboratory (LANL) simple and robust shift register design with a Commercial-Off-The-Shelf (COTS) processor and Ethernet communications. The UMSR is fully compatiblemore » with existing International Atomic Energy Agency (IAEA) neutron data acquisition instruments such as the Advance Multiplicity Shift Register (AMSR) and JSR-15. The UMSR has three input channels: a multiplicity shift register input and two auxiliary inputs. The UMSR provides 0V to 2kV of programmable High Voltage (HV) bias and both a 12V and a 5V detector power supply output. A serial over USB communication line to the UMSR allows the use of existing versions of INCC or MIC software while the Ethernet port is compatible with the new IAEA RAINSTORM communication protocol.« less

Learning Mathematics in a CAS Environment: The Genesis of a Reflection about Instrumentation and the Dialectics between Technical and Conceptual Work.

ERIC Educational Resources Information Center

Artigue, Michele

2002-01-01

Presents an anthropological approach used in French research and the theory of instrumentation developed in cognitive ergonomics. Shows how these frameworks allow an approach to the educational use of CAS technology, focusing on the unexpected complexity of instrumental genesis, mathematical needs of instrumentation, status of instrumented…

Comprehensive helicopter rotor instrumentation - A retrofit approach using miniature transducers

NASA Technical Reports Server (NTRS)

Jacklin, Stephen A.; Mort, Ray; Morrison, Dwayne

1992-01-01

This paper reports an approach used to retrofit a set of full-scale main rotor blades with 290 miniature pressure transducers, 46 strain gages, and 24 miniature accelerometers. Normally, in order to avoid disturbing the aerodynamics of the rotor flow field, the pressure instrumentation must be integrally built into the body of the rotor blades. However, using a method developed with NASA, miniature pressure transducers are mounted to the blade exterior surface without degrading the quality of the blade aerodynamics. Moreover, it is estimated that this approach reduced costs by more than 50 percent over building a set of pressure instrumented blades. The aerodynamic measurement objectives are presented as are instrumentation design considerations, type of instrumentation used, assembly process, and the installed instrumentation characteristics.

Differences between Homicides Committed by Lone and Multiple Offenders in Korea.

PubMed

Park, Jisun; Cho, Joon Tag

2018-05-16

The aim of this study was to differentiate between homicides committed by multiple offenders and homicides committed by lone offenders. Using data on homicide incidents that occurred in South Korea between 1985 and 2008, we compared 134 homicides committed by multiple offenders, with 369 homicides committed by lone offenders. A greater proportion of homicides committed by multiple offenders involved injuries to the victim's head compared to homicides by lone offenders. Homicides committed by multiple offenders were more likely to involve blunt instruments and ligatures, whereas homicides by lone offenders were more likely to involve sharp instruments. In addition, a majority of the homicides committed by multiple offenders were planned. The results of this study have practical implications for homicide investigations, as well as theoretical implications for homicide research on the difference in offense behaviors based on the number of offenders. © 2018 American Academy of Forensic Sciences.

Pilot tracking performance during successive in-flight simulated instrument approaches.

DOT National Transportation Integrated Search

1972-02-01

Eight instrument rated pilots with flying experience ranging from 600 to 12,271 hours each flew 10 simulated ILS instrument approaches in a single engine, general aviation aircraft equipped with a primary flight display arranged in a conventional 'T'...

Unravelling salutogenic mechanisms in the workplace: the role of learning.

PubMed

Pijpker, Roald; Vaandrager, Lenneke; Bakker, Evert Jan; Koelen, Maria

To explore the moderating and mediating role(s) of learning within the relationship between sense of coherence (SOC) and generalized resistance resources. Cross-sectional study (N=481), using a self-administered questionnaire, of employees working in the healthcare sector in the Netherlands in 2017. Four residential healthcare settings and one healthcare-related Facebook group were involved. Multiple linear regression models were used to test for moderating and mediating effects of learning. Social relations, task significance, and job control significantly explained variance in SOC. Conceptual, social, and instrumental learning, combined, moderated the relationship between SOC and task significance. Instrumental learning moderated the relationship between job control and SOC. Social learning also mediated this relationship. Conceptual learning did not show any moderating or mediating effect. The relationship between SOC and the three GRRs seems to be strengthened or explained-to a certain extent-by instrumental and social learning. Healthcare organizations are recommended to promote learning through formal activities as well as through cooperation, feedback, sharing experiences, and job challenges. This requires employee participation and a multilevel interdisciplinary approach. Copyright © 2018 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Fluorescence Fluctuation Approaches to the Study of Adhesion and Signaling

PubMed Central

Bachir, Alexia I.; Kubow, Kristopher E.; Horwitz, Alan R.

2013-01-01

Cell–matrix adhesions are large, multimolecular complexes through which cells sense and respond to their environment. They also mediate migration by serving as traction points and signaling centers and allow the cell to modify the surroucnding tissue. Due to their fundamental role in cell behavior, adhesions are germane to nearly all major human health pathologies. However, adhesions are extremely complex and dynamic structures that include over 100 known interacting proteins and operate over multiple space (nm–µm) and time (ms–min) regimes. Fluorescence fluctuation techniques are well suited for studying adhesions. These methods are sensitive over a large spatiotemporal range and provide a wealth of information including molecular transport dynamics, interactions, and stoichiometry from a single time series. Earlier chapters in this volume have provided the theoretical background, instrumentation, and analysis algorithms for these techniques. In this chapter, we discuss their implementation in living cells to study adhesions in migrating cells. Although each technique and application has its own unique instrumentation and analysis requirements, we provide general guidelines for sample preparation, selection of imaging instrumentation, and optimization of data acquisition and analysis parameters. Finally, we review several recent studies that implement these techniques in the study of adhesions. PMID:23280111

The 2 Pi Charged Particles Analyzer: All-Sky Camera Concept and Development for Space Missions

NASA Technical Reports Server (NTRS)

Vaisberg, O.; Berthellier, J.-J.; Moore, T.; Avanov, L.; Leblanc, F.; Leblanc, F.; Moiseev, P.; Moiseenko, D.; Becker, J.; Collier, M.;

Epinephrine Auto-Injector Versus Drawn Up Epinephrine for Anaphylaxis Management: A Scoping Review.

PubMed

Chime, Nnenna O; Riese, Victoria G; Scherzer, Daniel J; Perretta, Julianne S; McNamara, LeAnn; Rosen, Michael A; Hunt, Elizabeth A

2017-08-01

Anaphylaxis is a life-threatening event. Most clinical symptoms of anaphylaxis can be reversed by prompt intramuscular administration of epinephrine using an auto-injector or epinephrine drawn up in a syringe and delays and errors may be fatal. The aim of this scoping review is to identify and compare errors associated with use of epinephrine drawn up in a syringe versus epinephrine auto-injectors in order to assist hospitals as they choose which approach minimizes risk of adverse events for their patients. PubMed, Embase, CINAHL, Web of Science, and the Cochrane Library were searched using terms agreed to a priori. We reviewed human and simulation studies reporting errors associated with the use of epinephrine in anaphylaxis. There were multiple screening stages with evolving feedback. Each study was independently assessed by two reviewers for eligibility. Data were extracted using an instrument modeled from the Zaza et al instrument and grouped into themes. Three main themes were noted: 1) ergonomics, 2) dosing errors, and 3) errors due to route of administration. Significant knowledge gaps in the operation of epinephrine auto-injectors among healthcare providers, patients, and caregivers were identified. For epinephrine in a syringe, there were more frequent reports of incorrect dosing and erroneous IV administration with associated adverse cardiac events. For the epinephrine auto-injector, unintentional administration to the digit was an error reported on multiple occasions. This scoping review highlights knowledge gaps and a diverse set of errors regardless of the approach to epinephrine preparation during management of anaphylaxis. There are more potentially life-threatening errors reported for epinephrine drawn up in a syringe than with the auto-injectors. The impact of these knowledge gaps and potentially fatal errors on patient outcomes, cost, and quality of care is worthy of further investigation.

Proof-of-Concept Part-Task Trainer to Enhance Situation Awareness for Instrument Approach Procedures in Aviation Domain

DTIC Science & Technology

2017-06-01

able.  If the autopilot is engaged on the INAV controlling solution side and the  CDI source is changed to set up for the approach , the NAV mode...release. Distribution is unlimited. PROOF-OF-CONCEPT PART-TASK TRAINER TO ENHANCE SITUATION AWARENESS FOR INSTRUMENT APPROACH PROCEDURES IN AVIATION...CONCEPT PART-TASK TRAINER TO ENHANCE SITUATION AWARENESS FOR INSTRUMENT APPROACH PROCEDURES IN AVIATION DOMAIN 5. FUNDING NUMBERS 6. AUTHOR(S

Effects of multiple root canal usage on the surface topography and fracture of two different Ni-Ti rotary file systems.

PubMed

Kottoor, Jojo; Velmurugan, Natanasabapathy; Gopikrishna, Velayutham; Krithikadatta, Jogikalmat

2013-01-01

The purpose of this study was to evaluate the effect of multiple root canal usage on the surface topography and fracture of Twisted File (TF) and ProTaper (PT) rotary Ni-Ti file systems, using scanning electron microscope (SEM). Ten sets of PT and TF instruments were used to prepare the mesial canals of mandibular first molars. TF 25, 0.06 taper and PT F1 instruments were analyzed by SEM when new and thereafter every three root canal usages. This sequence was repeated for both the TF and PT groups until 12 uses. Two images of the instrument were recorded, one of the instrument tip and the other 5 mm from the tip, both at × 100 magnification. The sequential use was continued till the instrument fractured and the number of root canal usages for the file to fracture was noted. All fracture surfaces were examined under the SEM. Fresh TF instruments showed no surface wear when compared to PT instruments (P < 0.05). Spiral distortion scores remained the same for both the groups till the 6 th usage (P > 0.05), while at the 9 th usage TF showed a steep increase in the spiral distortion score when compared to PT (P < 0.05). PT instruments fractured at a mean root canal usage of 17.4, while TF instruments showed a mean root canal usage of 11.8. Fractographically, all the TF instruments failed due to torsion, while all the PT instruments failed because of cyclic fatigue. PT instruments showed more resistance to fracture than TF instruments.

Intracalibration of particle detectors on a three-axis stabilized geostationary platform

NASA Astrophysics Data System (ADS)

Rowland, W.; Weigel, R. S.

2012-11-01

We describe an algorithm for intracalibration of measurements from plasma or energetic particle detectors on a three-axis stabilized platform. Modeling and forecasting of Earth's radiation belt environment requires data from particle instruments, and these data depend on measurements which have an inherent calibration uncertainty. Pre-launch calibration is typically performed, but on-orbit changes in the instrument often necessitate adjustment of calibration parameters to mitigate the effect of these changes on the measurements. On-orbit calibration practices for particle detectors aboard spin-stabilized spacecraft are well established. Three-axis stabilized platforms, however, pose unique challenges even when comparisons are being performed between multiple telescopes measuring the same energy ranges aboard the same satellite. This algorithm identifies time intervals when different telescopes are measuring particles with the same pitch angles. These measurements are used to compute scale factors which can be multiplied by the pre-launch geometric factor to correct any changes. The approach is first tested using measurements from GOES-13 MAGED particle detectors over a 5-month time period in 2010. We find statistically significant variations which are generally on the order of 5% or less. These results do not appear to be dependent on Poisson statistics nor upon whether a dead time correction was performed. When applied to data from a 5-month interval in 2011, one telescope shows a 10% shift from the 2010 scale factors. This technique has potential for operational use to help maintain relative calibration between multiple telescopes aboard a single satellite. It should also be extensible to inter-calibration between multiple satellites.

A Variational Method to Retrieve the Extinction Profile in Liquid Clouds Using Multiple Field-of-View Lidar

NASA Technical Reports Server (NTRS)

Pounder, Nicola L.; Hogan, Robin J.; Varnai, Tamas; Battaglia, Alessandro; Cahalan, Robert F.

2011-01-01

While liquid clouds playa very important role in the global radiation budget, it's been very difficult to remotely determine their internal cloud structure. Ordinary lidar instruments (similar to radars but using visible light pulses) receive strong signals from such clouds, but the information is limited to a thin layer near the cloud boundary. Multiple field-of-view (FOV) lidars offer some new hope as they are able to isolate photons that were scattered many times by cloud droplets and penetrated deep into a cloud before returning to the instrument. Their data contains new information on cloud structure, although the lack of fast simulation methods made it challenging to interpret the observations. This paper describes a fast new technique that can simulate multiple-FOV lidar signals and can even estimate the way the signals would change in response to changes in cloud properties-an ability that allows quick refinements in our initial guesses of cloud structure. Results for a hypothetical airborne three-FOV lidar suggest that this approach can help determine cloud structure for a deeper layer in clouds, and can reliably determine the optical thickness of even fairly thick liquid clouds. The algorithm is also applied to stratocumulus observations by the 8-FOV airborne "THOR" lidar. These tests demonstrate that the new method can determine the depth to which a lidar provides useful information on vertical cloud structure. This work opens the way to exploit data from spaceborne lidar and radar more rigorously than has been possible up to now.

Common Calibration Source for Monitoring Long-term Ozone Trends

NASA Technical Reports Server (NTRS)

Kowalewski, Matthew

2004-01-01

Accurate long-term satellite measurements are crucial for monitoring the recovery of the ozone layer. The slow pace of the recovery and limited lifetimes of satellite monitoring instruments demands that datasets from multiple observation systems be combined to provide the long-term accuracy needed. A fundamental component of accurately monitoring long-term trends is the calibration of these various instruments. NASA s Radiometric Calibration and Development Facility at the Goddard Space Flight Center has provided resources to minimize calibration biases between multiple instruments through the use of a common calibration source and standardized procedures traceable to national standards. The Facility s 50 cm barium sulfate integrating sphere has been used as a common calibration source for both US and international satellite instruments, including the Total Ozone Mapping Spectrometer (TOMS), Solar Backscatter Ultraviolet 2 (SBUV/2) instruments, Shuttle SBUV (SSBUV), Ozone Mapping Instrument (OMI), Global Ozone Monitoring Experiment (GOME) (ESA), Scanning Imaging SpectroMeter for Atmospheric ChartographY (SCIAMACHY) (ESA), and others. We will discuss the advantages of using a common calibration source and its effects on long-term ozone data sets. In addition, sphere calibration results from various instruments will be presented to demonstrate the accuracy of the long-term characterization of the source itself.

Measuring Middle Grades Teachers' Understanding of Rational Numbers with the Mixture Rasch Model

ERIC Educational Resources Information Center

Izsak, Andrew; Orrill, Chandra Hawley; Cohen, Allan S.; Brown, Rachael Eriksen

2010-01-01

We report the development of a multiple-choice instrument that measures the mathematical knowledge needed for teaching arithmetic with fractions, decimals, and proportions. In particular, the instrument emphasizes the knowledge needed to reason about such arithmetic when numbers are embedded in problem situations. We administered our instrument to…

Using Hierarchical Models of Studying To Evaluate the Character of Students' Study Activities.

ERIC Educational Resources Information Center

Warkentin, Robert W.; And Others

An instrument was developed to measure students' engagement in various classes of study activities within multiple study contexts. This instrument is to be used in a large, ongoing research project investigating the underpinnings of student study activities and effects on academic achievement. The computer-administered instrument used--the Study…

Fresh Fuel Measurements With the Differential Die-Away Self-Interrogation Instrument

NASA Astrophysics Data System (ADS)

Trahan, Alexis C.; Belian, Anthony P.; Swinhoe, Martyn T.; Menlove, Howard O.; Flaska, Marek; Pozzi, Sara A.

2017-07-01

The purpose of the Next Generation Safeguards Initiative (NGSI)-Spent Fuel (SF) Project is to strengthen the technical toolkit of safeguards inspectors and/or other interested parties. The NGSI-SF team is working to achieve the following technical goals more easily and efficiently than in the past using nondestructive assay measurements of spent fuel assemblies: 1) verify the initial enrichment, burnup, and cooling time of facility declaration; 2) detect the diversion or replacement of pins; 3) estimate the plutonium mass; 4) estimate decay heat; and 5) determine the reactivity of spent fuel assemblies. The differential die-away self-interrogation (DDSI) instrument is one instrument that was assessed for years regarding its feasibility for robust, timely verification of spent fuel assemblies. The instrument was recently built and was tested using fresh fuel assemblies in a variety of configurations, including varying enrichment, neutron absorber content, and symmetry. The early die-away method, a multiplication determination method developed in simulation space, was successfully tested on the fresh fuel assembly data and determined multiplication with a root-mean-square (RMS) error of 2.9%. The experimental results were compared with MCNP simulations of the instrument as well. Low multiplication assemblies had agreement with an average RMS error of 0.2% in the singles count rate (i.e., total neutrons detected per second) and 3.4% in the doubles count rates (i.e., neutrons detected in coincidence per second). High-multiplication assemblies had agreement with an average RMS error of 4.1% in the singles and 13.3% in the doubles count rates.

GNSS Precise Kinematic Positioning for Multiple Kinematic Stations Based on A Priori Distance Constraints

PubMed Central

He, Kaifei; Xu, Tianhe; Förste, Christoph; Petrovic, Svetozar; Barthelmes, Franz; Jiang, Nan; Flechtner, Frank

2016-01-01

When applying the Global Navigation Satellite System (GNSS) for precise kinematic positioning in airborne and shipborne gravimetry, multiple GNSS receiving equipment is often fixed mounted on the kinematic platform carrying the gravimetry instrumentation. Thus, the distances among these GNSS antennas are known and invariant. This information can be used to improve the accuracy and reliability of the state estimates. For this purpose, the known distances between the antennas are applied as a priori constraints within the state parameters adjustment. These constraints are introduced in such a way that their accuracy is taken into account. To test this approach, GNSS data of a Baltic Sea shipborne gravimetric campaign have been used. The results of our study show that an application of distance constraints improves the accuracy of the GNSS kinematic positioning, for example, by about 4 mm for the radial component. PMID:27043580

Integrated photoacoustic, ultrasound and fluorescence platform for diagnostic medical imaging-proof of concept study with a tissue mimicking phantom.

PubMed

James, Joseph; Murukeshan, Vadakke Matham; Woh, Lye Sun

2014-07-01

The structural and molecular heterogeneities of biological tissues demand the interrogation of the samples with multiple energy sources and provide visualization capabilities at varying spatial resolution and depth scales for obtaining complementary diagnostic information. A novel multi-modal imaging approach that uses optical and acoustic energies to perform photoacoustic, ultrasound and fluorescence imaging at multiple resolution scales from the tissue surface and depth is proposed in this paper. The system comprises of two distinct forms of hardware level integration so as to have an integrated imaging system under a single instrumentation set-up. The experimental studies show that the system is capable of mapping high resolution fluorescence signatures from the surface, optical absorption and acoustic heterogeneities along the depth (>2cm) of the tissue at multi-scale resolution (<1µm to <0.5mm).

GNSS Precise Kinematic Positioning for Multiple Kinematic Stations Based on A Priori Distance Constraints.

PubMed

He, Kaifei; Xu, Tianhe; Förste, Christoph; Petrovic, Svetozar; Barthelmes, Franz; Jiang, Nan; Flechtner, Frank

2016-04-01

When applying the Global Navigation Satellite System (GNSS) for precise kinematic positioning in airborne and shipborne gravimetry, multiple GNSS receiving equipment is often fixed mounted on the kinematic platform carrying the gravimetry instrumentation. Thus, the distances among these GNSS antennas are known and invariant. This information can be used to improve the accuracy and reliability of the state estimates. For this purpose, the known distances between the antennas are applied as a priori constraints within the state parameters adjustment. These constraints are introduced in such a way that their accuracy is taken into account. To test this approach, GNSS data of a Baltic Sea shipborne gravimetric campaign have been used. The results of our study show that an application of distance constraints improves the accuracy of the GNSS kinematic positioning, for example, by about 4 mm for the radial component.

Experimental evaluation of candidate graphical microburst alert displays

NASA Technical Reports Server (NTRS)

Wanke, Craig R.; Hansman, R. John

1992-01-01

A piloted flight simulator experiment was conducted to evaluate issues related to the display of microburst alerts on electronic cockpit instrumentation. Issues addressed include display clarity, usefulness of multilevel microburst intensity information, and whether information from multiple sensors should be presented separately or 'fused' into combined alerts. Nine active airline pilots of 'glass cockpit' aircraft participated in the study. Microburst alerts presented on a moving map display were found to be visually clear and useful to pilots. Also, multilevel intensity information coded by colors or patterns was found to be important for decision making purposes. Pilot opinion was mixed on whether to 'fuse' data from multiple sensors, and some resulting design tradeoffs were identified. The positional information included in the graphical alert presentation was found useful by the pilots for planning lateral missed approach maneuvers, but may result in deviations which could interfere with normal airport operations. A number of flight crew training issues were also identified.

78 FR 76052 - Amendment of Class E Airspace; Gainesville, TX

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-16

... Airport has made reconfiguration necessary for standard instrument approach procedures and for the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES: Effective date: 0901... for standard instrument approach procedures at Gainesville Municipal Airport, Gainesville, TX...

77 FR 52219 - Amendment of Class E Airspace; Lewistown, MT

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures at Lewistown Municipal Airport. This improves the safety and management of Instrument Flight Rules (IFR...) standard instrument approach procedures at the airport. This action is necessary for the safety and...

76 FR 55232 - Establishment of Class E Airspace; Copperhill, TN

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-07

...) Standard Instrument Approach Procedures serving Martin Campbell Field Airport. This action enhances the safety and airspace management of Instrument Flight Rules (IFR) operations within the National Airspace... Positioning System (GPS) Standard Instrument Approach Procedures developed for Martin Campbell Field Airport...

78 FR 38197 - Establishment of Class E Airspace; Port Townsend, WA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-26

... Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures at Jefferson County International Airport. This improves the safety and management of Instrument Flight Rules... airport, to accommodate IFR aircraft executing new RNAV (GPS) standard instrument approach procedures...

Heat Load Sharing in a Capillary Pumped Loop with Multiple Evaporators and Multiple Condensers

NASA Technical Reports Server (NTRS)

Ku, Jentung

2005-01-01

This paper describes the heat load sharing function among multiple parallel evaporators in a capillary pumped loop (CPL). In the normal mode of operation, the evaporators cool the instruments by absorbing the waste heat. When an instruments is turned off, the attached evaporator can keep it warm by receiving heat from other evaporators serving the operating instruments. This is referred to as heat load sharing. A theoretical basis of heat load sharing is given first. The fact that the wicks in the powered evaporators will develop capillary pressure to force the generated vapor to flow to cold locations where the pressure is lower leads to the conclusion that heat load sharing is an inherent function of a CPL with multiple evaporators. Heat load sharing has been verified with many CPLs in ground tests. Experimental results of the Capillary Pumped Loop 3 (CAPL 3) Flight Experiment are presented in this paper. Factors that affect the amount of heat being shared are discussed. Some constraints of heat load sharing are also addressed.

New Worlds Observer Telescope and Instrument Optical Design Concepts

NASA Technical Reports Server (NTRS)

Howard, Joseph M.; Noecker, Charlie; Kendrick, Steve; Woodgate, Bruce; Kilstron, Steve; Cash, Webster

2008-01-01

Optical design concepts for the telescope and instrumentation for NASA s New Worlds Observer program are presented. A four-meter multiple channel telescope is discussed, as well as a suite of science instrument concepts. Wide field instrumentation (imager and spectrograph) would be accommodated by a three-mirror-anastigmat telescope design. Planet finding and characterization, and a UV instrument would use a separate channel that is picked off after the first two mirrors (primary and secondary). Guiding concepts are also discussed.

Multiplexed instrument-free meningitis diagnosis on a polymer/paper hybrid microfluidic biochip.

PubMed

Dou, Maowei; Sanjay, Sharma T; Dominguez, Delfina C; Liu, Peng; Xu, Feng; Li, XiuJun

2017-01-15

Neisseria meningitidis (N. meningitidis), Streptococcus pneumoniae (S. pneumoniae), and Haemophilus influenzae type b (Hib) are three most common pathogens accounting for most bacterial meningitis, a serious global infectious disease with high fatality, especially in developing nations. Because the treatment and antibiotics differ among each type, the identification of the exact bacteria causing the disease is vital. Herein, we report a polymer/paper hybrid microfluidic biochip integrated with loop-mediated isothermal amplification (LAMP) for multiplexed instrument-free diagnosis of these three major types of bacterial meningitis, with high sensitivity and specificity. Results can be visually observed by the naked eye or imaged by a smartphone camera under a portable UV light source. Without using any specialized laboratory instrument, the limits of detection of a few DNA copies per LAMP zone for N. meningitidis, S. pneumoniae and Hib were achieved within 1h. In addition, these three types of microorganisms spiked in artificial cerebrospinal fluid (ACSF) were directly detected simultaneously, avoiding cumbersome sample preparation procedures in conventional methods. Compared with the paper-free non-hybrid microfluidic biochip over a period of three months, the hybrid microfluidic biochip was found to have a much longer shelf life. Hence, this rapid, instrument-free and highly sensitive microfluidic approach has great potential for point-of-care (POC) diagnosis of multiple infectious diseases simultaneously, especially in resource-limited settings. Copyright © 2016 Elsevier B.V. All rights reserved.

Security Verification Techniques Applied to PatchLink COTS Software

NASA Technical Reports Server (NTRS)

Gilliam, David P.; Powell, John D.; Bishop, Matt; Andrew, Chris; Jog, Sameer

2006-01-01

Verification of the security of software artifacts is a challenging task. An integrated approach that combines verification techniques can increase the confidence in the security of software artifacts. Such an approach has been developed by the Jet Propulsion Laboratory (JPL) and the University of California at Davis (UC Davis). Two security verification instruments were developed and then piloted on PatchLink's UNIX Agent, a Commercial-Off-The-Shelf (COTS) software product, to assess the value of the instruments and the approach. The two instruments are the Flexible Modeling Framework (FMF) -- a model-based verification instrument (JPL), and a Property-Based Tester (UC Davis). Security properties were formally specified for the COTS artifact and then verified using these instruments. The results were then reviewed to determine the effectiveness of the approach and the security of the COTS product.

A review of instruments to measure interprofessional collaboration for chronic disease management for community-living older adults.

PubMed

Bookey-Bassett, Sue; Markle-Reid, Maureen; McKey, Colleen; Akhtar-Danesh, Noori

2016-01-01

It is acknowledged internationally that chronic disease management (CDM) for community-living older adults (CLOA) is an increasingly complex process. CDM for older adults, who are often living with multiple chronic conditions, requires coordination of various health and social services. Coordination is enabled through interprofessional collaboration (IPC) among individual providers, community organizations, and health sectors. Measuring IPC is complicated given there are multiple conceptualisations and measures of IPC. A literature review of several healthcare, psychological, and social science electronic databases was conducted to locate instruments that measure IPC at the team level and have published evidence of their reliability and validity. Five instruments met the criteria and were critically reviewed to determine their strengths and limitations as they relate to CDM for CLOA. A comparison of the characteristics, psychometric properties, and overall concordance of each instrument with salient attributes of IPC found the Collaborative Practice Assessment Tool to be the most appropriate instrument for measuring IPC for CDM in CLOA.

Pilot heart rate during in-flight simulated instrument approaches in a general aviation aircraft.

DOT National Transportation Integrated Search

1970-04-01

Eight instrument rated pilots with flying experience ranging from 600 to 12,271 hours each flew 10 simulated ILS instrument approaches in a single engine, general aviation aircraft equipped with a primary flight display arranged in conventional 'T' c...

76 FR 34576 - Amendment of Class E Airspace; Waynesboro, VA

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-14

... Waynesboro, VA, to accommodate the additional airspace need for the Standard Instrument Approach Procedures developed for Eagle's Nest Airport. This action enhances the safety and management of Instrument Flight... upward from 700 feet above the surface to accommodate new standard instrument approach procedures...

78 FR 34558 - Modification of Class E Airspace; Clifton/Morenci, AZ

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-10

... (RNAV) Global Positioning System (GPS) standard instrument approach procedures at Greenlee County Airport. This improves the safety and management of Instrument Flight Rules (IFR) operations at the... accommodate IFR aircraft executing RNAV (GPS) standard instrument approach procedures at the airport. This...

78 FR 72008 - Establishment of Class E Airspace; Aliceville, AL

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-02

...) Standard Instrument Approach Procedure (SIAP) serving George Downer Airport. This action enhances the safety and management of Instrument Flight Rules (IFR) operations at the airport. DATES: Effective 0901..., providing the controlled airspace required to accommodate the new RNAV (GPS) Standard Instrument Approach...

76 FR 59503 - Establishment of Class E Airspace; Lebanon, PA

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

... at Lebanon, PA, to accommodate new Standard Instrument Approach Procedures that have been developed... of the airport. This action enhances the safety and management of Instrument Flight Rules (IFR... support new standard instrument approach procedures developed at Keller Brothers Airport, Lebanon, PA. The...

76 FR 41397 - Establishment of Class E Airspace; Florence, OR

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-14

... (GPS) standard instrument approach procedures at Florence Municipal Airport. This improves the safety and management of Instrument Flight Rules (IFR) operations at the airport. DATES: Effective date, 0901...) standard instrument approach procedures at the airport. This action is necessary for the safety and...

76 FR 82113 - Amendment of Class E Airspace; Show Low, AZ

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures at Show Low Regional Airport. This improves the safety and management of Instrument Flight Rules (IFR... executing RNAV (GPS) standard instrument approach procedures at the airport. This action is necessary for...

76 FR 43615 - Proposed Amendment of Class E Airspace; Evansville, IN

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... to accommodate new Standard Instrument Approach Procedures at Evansville Regional Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for... new standard instrument approach procedures at Evansville Regional Airport, Evansville, IN. Controlled...

76 FR 14802 - Establishment of Class E Airspace; Lancaster, NH

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... Standard Instrument Approach Procedure (SIAP) serving the Weeks Medical Center Heliport. This action enhances the safety and airspace management of Instrument Flight Rules (IFR) operations within the National... required to support the special standard instrument approach procedures developed for Weeks Medical Center...

78 FR 67293 - Amendment of Class E Airspace; Kankakee, IL

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

... Instrument Approach Procedures at Greater Kankakee Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. Geographic coordinates... new standard instrument approach procedures at Greater Kankakee Airport, Kankakee, IL. Accordingly...

76 FR 57634 - Establishment of Class E Airspace; Chinle, AZ

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

...) Global Positioning System (GPS) standard instrument approach procedures at Chinle Municipal Airport. This improves the safety and management of Instrument Flight Rules (IFR) operations at the airport. DATES... RNAV (GPS) standard instrument approach procedures at the airport. This action is necessary for the...

76 FR 52230 - Establishment of Class E Airspace; Forest, VA

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-22

... Instrument Approach Procedures serving New London Airport. This action enhances the safety and airspace management of Instrument Flight Rules (IFR) operations within the National Airspace System. DATES: Effective... to support the new RNAV GPS standard instrument approach procedures developed for New London Airport...

Adaptation of the University of Wisconsin High Spectral Resolution Lidar for Polarization and Multiple Scattering Measurements

NASA Technical Reports Server (NTRS)

Eloranta, E. W.; Piironen, P. K.

1992-01-01

A new implementation of the High Spectral Resolution Lidar (HSRL) in an instrument van which allows measurements during field experiments is described. The instrument was modified to provide measurements of depolarization. In addition, both the signal amplitude and depolarization variations with receiver field of view are simultaneously measured. These modifications allow discrimination of ice clouds from water clouds and observation of multiple scattering contributions to the lidar return.

Application of Handheld Laser-Induced Breakdown Spectroscopy (LIBS) to Geochemical Analysis.

PubMed

Connors, Brendan; Somers, Andrew; Day, David

2016-05-01

While laser-induced breakdown spectroscopy (LIBS) has been in use for decades, only within the last two years has technology progressed to the point of enabling true handheld, self-contained instruments. Several instruments are now commercially available with a range of capabilities and features. In this paper, the SciAps Z-500 handheld LIBS instrument functionality and sub-systems are reviewed. Several assayed geochemical sample sets, including igneous rocks and soils, are investigated. Calibration data are presented for multiple elements of interest along with examples of elemental mapping in heterogeneous samples. Sample preparation and the data collection method from multiple locations and data analysis are discussed. © The Author(s) 2016.

Correction of confounding bias in non-randomized studies by appropriate weighting.

PubMed

Schmoor, Claudia; Gall, Christine; Stampf, Susanne; Graf, Erika

2011-03-01

In non-randomized studies, the assessment of a causal effect of treatment or exposure on outcome is hampered by possible confounding. Applying multiple regression models including the effects of treatment and covariates on outcome is the well-known classical approach to adjust for confounding. In recent years other approaches have been promoted. One of them is based on the propensity score and considers the effect of possible confounders on treatment as a relevant criterion for adjustment. Another proposal is based on using an instrumental variable. Here inference relies on a factor, the instrument, which affects treatment but is thought to be otherwise unrelated to outcome, so that it mimics randomization. Each of these approaches can basically be interpreted as a simple reweighting scheme, designed to address confounding. The procedures will be compared with respect to their fundamental properties, namely, which bias they aim to eliminate, which effect they aim to estimate, and which parameter is modelled. We will expand our overview of methods for analysis of non-randomized studies to methods for analysis of randomized controlled trials and show that analyses of both study types may target different effects and different parameters. The considerations will be illustrated using a breast cancer study with a so-called Comprehensive Cohort Study design, including a randomized controlled trial and a non-randomized study in the same patient population as sub-cohorts. This design offers ideal opportunities to discuss and illustrate the properties of the different approaches. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Registration and Fusion of Multiple Source Remotely Sensed Image Data

NASA Technical Reports Server (NTRS)

LeMoigne, Jacqueline

2004-01-01

Earth and Space Science often involve the comparison, fusion, and integration of multiple types of remotely sensed data at various temporal, radiometric, and spatial resolutions. Results of this integration may be utilized for global change analysis, global coverage of an area at multiple resolutions, map updating or validation of new instruments, as well as integration of data provided by multiple instruments carried on multiple platforms, e.g. in spacecraft constellations or fleets of planetary rovers. Our focus is on developing methods to perform fast, accurate and automatic image registration and fusion. General methods for automatic image registration are being reviewed and evaluated. Various choices for feature extraction, feature matching and similarity measurements are being compared, including wavelet-based algorithms, mutual information and statistically robust techniques. Our work also involves studies related to image fusion and investigates dimension reduction and co-kriging for application-dependent fusion. All methods are being tested using several multi-sensor datasets, acquired at EOS Core Sites, and including multiple sensors such as IKONOS, Landsat-7/ETM+, EO1/ALI and Hyperion, MODIS, and SeaWIFS instruments. Issues related to the coregistration of data from the same platform (i.e., AIRS and MODIS from Aqua) or from several platforms of the A-train (i.e., MLS, HIRDLS, OMI from Aura with AIRS and MODIS from Terra and Aqua) will also be considered.

78 FR 41837 - Establishment of Class E Airspace; Parkston, SD

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... Instrument Approach Procedures at Parkston Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES: Effective date... airspace exists to contain new standard instrument approach procedures at the airport. Controlled airspace...

78 FR 41838 - Establishment of Class E Airspace; Colt, AR

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... Instrument Approach Procedures at Delta Regional Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES: Effective date: 0901... exists to contain new standard instrument approach procedures at the airport. Controlled airspace...

78 FR 14478 - Proposed Establishment of Class E Airspace; Linton, ND

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... accommodate new Standard Instrument Approach Procedures (SIAP) at Linton Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs... accommodate new standard instrument approach procedures at Linton Municipal Airport, Linton, ND. Controlled...

78 FR 76053 - Establishment of Class E Airspace; Loup City, NE

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-16

... (RNAV) Standard Instrument Approach Procedures at Loup City Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport... contain aircraft executing new standard instrument approach procedures at the airport. Controlled airspace...

77 FR 29871 - Establishment of Class E Airspace; Branson West, MO

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... airspace at Branson West, MO, to accommodate new Area Navigation (RNAV) Standard Instrument Approach... safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES: Effective date... accommodate new standard instrument approach procedures at Branson West Municipal- Emerson Field Airport, and...

78 FR 67292 - Amendment of Class E Airspace; Carlsbad, NM

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

...) Standard Instrument Approach Procedures at Cavern City Air Terminal. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES... feet above the surface to contain aircraft executing new standard instrument approach procedures at...

77 FR 29865 - Amendment of Class E Airspace; Leesville, LA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... (RNAV) Standard Instrument Approach Procedures at Leesville Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES... accommodate new standard instrument approach procedures at Leesville Airport, Leesville, LA. This action is...

76 FR 30821 - Amendment of Class E Airspace; Duluth, MN

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-27

... accommodate new Area Navigation (RNAV) Standard Instrument Approach Procedures at Duluth International Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR... 700 feet above the surface, for new standard instrument approach procedures at Duluth International...

77 FR 29875 - Establishment of Class E Airspace; Houston, MO

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... Instrument Approach Procedures at Houston Memorial Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES: Effective date... accommodate new standard instrument approach procedures at Houston Memorial Airport, Houston, MO. This action...

77 FR 65462 - Establishment of Class E Airspace; La Belle, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-29

...) Standard Instrument Approach Procedures at La Belle Municipal Airport. This action enhances the safety and airspace management of Instrument Flight Rules (IFR) operations within the National Airspace System. DATES... accommodate the new RNAV GPS Standard Instrument Approach Procedures developed for La Belle Municipal Airport...

77 FR 17327 - Amendment of Class E Airspace; Hastings, NE

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-26

...) Standard Instrument Approach Procedures at Hastings Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES... accommodate new RNAV standard instrument approach procedures at Hastings Municipal Airport, Hastings, NE. This...

78 FR 52083 - Amendment of Class E Airspace; Fort Polk, LA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-22

...) Standard Instrument Approach Procedures at Polk Army Airfield (AAF). The airport's geographic coordinates are also adjusted. This action enhances the safety and management of Instrument Flight Rule (IFR... extending upward from 700 feet above the surface to accommodate new standard instrument approach procedures...

Music: Instrumental Techniques, Conducting.

ERIC Educational Resources Information Center

Grozan, Carl

A course in introduction to the conducting of music groups of voices or instruments is presented. The approach used is a laboratory approach in which pupils will develop skills in score reading, physical gestures, rehearsal techniques, transpositions, voice and instrument ranges. Course objectives include: (1) The pupil will identify all…

Automatic processing of high-rate, high-density multibeam echosounder data

NASA Astrophysics Data System (ADS)

Calder, B. R.; Mayer, L. A.

2003-06-01

Multibeam echosounders (MBES) are currently the best way to determine the bathymetry of large regions of the seabed with high accuracy. They are becoming the standard instrument for hydrographic surveying and are also used in geological studies, mineral exploration and scientific investigation of the earth's crustal deformations and life cycle. The significantly increased data density provided by an MBES has significant advantages in accurately delineating the morphology of the seabed, but comes with the attendant disadvantage of having to handle and process a much greater volume of data. Current data processing approaches typically involve (computer aided) human inspection of all data, with time-consuming and subjective assessment of all data points. As data rates increase with each new generation of instrument and required turn-around times decrease, manual approaches become unwieldy and automatic methods of processing essential. We propose a new method for automatically processing MBES data that attempts to address concerns of efficiency, objectivity, robustness and accuracy. The method attributes each sounding with an estimate of vertical and horizontal error, and then uses a model of information propagation to transfer information about the depth from each sounding to its local neighborhood. Embedded in the survey area are estimation nodes that aim to determine the true depth at an absolutely defined location, along with its associated uncertainty. As soon as soundings are made available, the nodes independently assimilate propagated information to form depth hypotheses which are then tracked and updated on-line as more data is gathered. Consequently, we can extract at any time a "current-best" estimate for all nodes, plus co-located uncertainties and other metrics. The method can assimilate data from multiple surveys, multiple instruments or repeated passes of the same instrument in real-time as data is being gathered. The data assimilation scheme is sufficiently robust to deal with typical survey echosounder errors. Robustness is improved by pre-conditioning the data, and allowing the depth model to be incrementally defined. A model monitoring scheme ensures that inconsistent data are maintained as separate but internally consistent depth hypotheses. A disambiguation of these competing hypotheses is only carried out when required by the user. The algorithm has a low memory footprint, runs faster than data can currently be gathered, and is suitable for real-time use. We call this algorithm CUBE (Combined Uncertainty and Bathymetry Estimator). We illustrate CUBE on two data sets gathered in shallow water with different instruments and for different purposes. We show that the algorithm is robust to even gross failure modes, and reliably processes the vast majority of the data. In both cases, we confirm that the estimates made by CUBE are statistically similar to those generated by hand.

An Exploratory Survey of Information Requirements for Instrument Approach Charts

DOT National Transportation Integrated Search

1995-03-01

This report documents a user centered survey and interview effort conducted to analyze the information content of : current Instrument Approach Plates (IAP). In the pilot opinion survey of approach chart information requirements, : respondents indica...

A Framework for Instrument Development of a Choice Experiment: An Application to Type 2 Diabetes.

PubMed

Janssen, Ellen M; Segal, Jodi B; Bridges, John F P

2016-10-01

Choice experiments are increasingly used to obtain patient preference information for regulatory benefit-risk assessments. Despite the importance of instrument design, there remains a paucity of literature applying good research principles. We applied a novel framework for instrument development of a choice experiment to measure type 2 diabetes mellitus treatment preferences. Applying the framework, we used evidence synthesis, expert consultation, stakeholder engagement, pretest interviews, and pilot testing to develop a best-worst scaling (BWS) and discrete choice experiment (DCE). We synthesized attributes from published DCEs for type 2 diabetes, consulted clinical experts, engaged a national advisory board, conducted local cognitive interviews, and pilot tested a national survey. From published DCEs (n = 17), ten attribute categories were extracted with cost (n = 11) having the highest relative attribute importance (RAI) (range 6-10). Clinical consultation and stakeholder engagement identified six attributes for inclusion. Cognitive pretesting with local diabetes patients (n = 25) ensured comprehension of the choice experiment. Pilot testing with patients from a national sample (n = 50) identified nausea as most important (RAI for DCE: 10 [95 % CI 8.5-11.5]; RAI for BWS: 10 [95 % CI 8.9-11.1]). The developed choice experiment contained five attributes (A1c decrease, blood glucose stability, low blood glucose, nausea, additional medicine, and cost). The framework for instrument development of a choice experiment included five stages of development and incorporated multiple stakeholder perspectives. Further comparisons of instrument development approaches are needed to identify best practices. To facilitate comparisons, researchers need to be encouraged to publish or discuss their instrument development strategies and findings.

Can Reliability of Multiple Component Measuring Instruments Depend on Response Option Presentation Mode?

ERIC Educational Resources Information Center

Menold, Natalja; Raykov, Tenko

2016-01-01

This article examines the possible dependency of composite reliability on presentation format of the elements of a multi-item measuring instrument. Using empirical data and a recent method for interval estimation of group differences in reliability, we demonstrate that the reliability of an instrument need not be the same when polarity of the…

Scanning electron microscopy of bone: instrument, specimen, and issues.

PubMed

Boyde, A; Jones, S J

1996-02-01

There are many ways available now to maximise and analyse the information that can be obtained on the structure and constitution of bone using SEM. This paper considers a range of methods and the problems that arise relating to instrumentation and methodology as they apply to the use of SEM in the study of bone. In addition to the review content, some novel technical approaches to the SEM of bone are considered here for the first time; these include low kV imaging for the detection of new surface bone packets (and residual demineralized matrix after resorption), low kV BSE imaging of uncoated, embedded, and unembedded samples, environmental SEM for the study of wet tissue, low distortion, very low magnification imaging for the study of cancellous bone architecture, the use of multiple detectors for fast electrons in improving the imaging of porous samples, and high resolution, low voltage imaging for the study of collagen degradation during bone resorption.

On the absolute calibration of SO2 cameras

USGS Publications Warehouse

Lübcke, Peter; Bobrowski, Nicole; Illing, Sebastian; Kern, Christoph; Alvarez Nieves, Jose Manuel; Vogel, Leif; Zielcke, Johannes; Delgados Granados, Hugo; Platt, Ulrich

2013-01-01

This work investigates the uncertainty of results gained through the two commonly used, but quite different, calibration methods (DOAS and calibration cells). Measurements with three different instruments, an SO2 camera, a NFOVDOAS system and an Imaging DOAS (I-DOAS), are presented. We compare the calibration-cell approach with the calibration from the NFOV-DOAS system. The respective results are compared with measurements from an I-DOAS to verify the calibration curve over the spatial extent of the image. The results show that calibration cells, while working fine in some cases, can lead to an overestimation of the SO2 CD by up to 60% compared with CDs from the DOAS measurements. Besides these errors of calibration, radiative transfer effects (e.g. light dilution, multiple scattering) can significantly influence the results of both instrument types. The measurements presented in this work were taken at Popocatepetl, Mexico, between 1 March 2011 and 4 March 2011. Average SO2 emission rates between 4.00 and 14.34 kg s−1 were observed.

An overview of the CalNex 2010 field mission: research to extend the understanding of climate and air quality issues in California (Invited)

NASA Astrophysics Data System (ADS)

Ryerson, T. B.

2009-12-01

CalNex is a major field study planned for May and June of 2010. The study, led by NOAA and the California Air Resources Board, coordinates many interagency partners with independent but complementary capabilities and goals. Observations from surface-, aircraft-, ship-, and space-based sensors, along with Lagrangian and Eulerian modeling studies, will be used to extend previous studies and contribute new data and understanding to issues relevant to climate change and air quality in California. This overview will present the integrated approach that will be taken in CalNex, utilizing long-term surface observations, instrumented tall towers, several major intensive ground sites, a network of daily ozonesonde launches, a radar profiling network, multiple instrumented research aircraft, a research vessel, and retrievals from several satellites. The primary CalNex science questions and experimental strategies to address them will be presented, with illustrations and data examples taken from recent field projects in California to provide context for the upcoming study.

Intraoral fiber-optic-based diagnostic for periodontal disease

NASA Astrophysics Data System (ADS)

Colston, Bill W., Jr.; Gutierrez, Dora M.; Everett, Matthew J.; Brown, Steve B.; Langry, Kevin C.; Cox, Weldon R.; Johnson, Paul W.; Roe, Jeffrey N.

2000-05-01

The purpose of this initial study was to begin development of a new, objective diagnostic instrument that will allow simultaneous quantitation of multiple proteases within a single periodontal pocket using a chemical fiber optic senor. This approach could potentially be adapted to use specific antibodies and chemiluminescence to detect and quantitate virtually any compound and compare concentrations of different compounds within the same periodontal pocket. The device could also be used to assay secretions in salivary ducts or from a variety of wounds. The applicability is, therefore, not solely limited to dentistry and the device would be important both for clinical diagnostics and as a research too.

Outcomes associated with common and immigrant-group-specific responses to intimate terrorism.

PubMed

Yingling, Julie; Morash, Merry; Song, Juyoung

2015-02-01

The research for this article used available qualitative data from separate studies of South Asian-, Vietnamese-, and Hispanic-origin women victimized by intimate terrorism. Regardless of country of origin, period, or U.S. community, women used similar ways to cope. Consistent with perpetrators' misogynistic attitudes and aim of enforcing patriarchal expectations, many women responded to abuse from positions of powerlessness and fear. Instrumental help from family and friends and, depending on the group, advocacy agencies or counseling services assisted women in leaving men or stopping the abuse. Women used multiple coping strategies, often adding new approaches when those used initially failed. © The Author(s) 2014.

Value Encounters - Modeling and Analyzing Co-creation of Value

NASA Astrophysics Data System (ADS)

Weigand, Hans

Recent marketing and management literature has introduced the concept of co-creation of value. Current value modeling approaches such as e3-value focus on the exchange of value rather than co-creation. In this paper, an extension to e3-value is proposed in the form of a “value encounter”. Value encounters are defined as interaction spaces where a group of actors meet and derive value by each one bringing in some of its own resources. They can be analyzed from multiple strategic perspectives, including knowledge management, social network management and operational management. Value encounter modeling can be instrumental in the context of service analysis and design.

An Advanced Approach to Simultaneous Monitoring of Multiple Bacteria in Space

NASA Technical Reports Server (NTRS)

Eggers, M.

1998-01-01

The utility of a novel microarray-based microbial analyzer was demonstrated by the rapid detection, imaging, and identification of a mixture of microorganisms found in a waste water sample from the Lunar-Mars Life Support Test Project through the synergistic combination of: (1) judicious RNA probe selection via algorithms developed by University of Houston scientists; (2) tuned surface chemistries developed by Baylor College of Medicine scientists to facilitate hybridization of rRNA targets to DNA probes under very low salt conditions, thereby minimizing secondary structure; and (3) integration of the microarray printing and detection/imaging instrumentation by Genometrix to complete the quantitative analysis of microorganism mixtures.

Urogenital surgery performed with the mare standing.

PubMed

Seabaugh, Kathryn A; Schumacher, Jim

2014-04-01

Many urogenital procedures of the mare are commonly performed with the mare standing. Ovariectomy via colpotomy was described as early as 1903, and the Caslick vulvoplasty was first described in 1937. As knowledge expands and instruments become more specialized, techniques will improve. With the introduction of laparoscopy, clinicians have not only been able to improve the previously described urogenital procedures but also to devise new procedures. This article describes multiple surgeries of the female urogenital tract, all of which can be performed with the mare standing, and describes a variety of approaches to some portions of the female urogenital tract. Copyright © 2014 Elsevier Inc. All rights reserved.

Multiplexed ChIP-Seq Using Direct Nucleosome Barcoding: A Tool for High-Throughput Chromatin Analysis.

PubMed

Chabbert, Christophe D; Adjalley, Sophie H; Steinmetz, Lars M; Pelechano, Vicent

2018-01-01

Chromatin immunoprecipitation followed by sequencing (ChIP-Seq) or microarray hybridization (ChIP-on-chip) are standard methods for the study of transcription factor binding sites and histone chemical modifications. However, these approaches only allow profiling of a single factor or protein modification at a time.In this chapter, we present Bar-ChIP, a higher throughput version of ChIP-Seq that relies on the direct ligation of molecular barcodes to chromatin fragments. Bar-ChIP enables the concurrent profiling of multiple DNA-protein interactions and is therefore amenable to experimental scale-up, without the need for any robotic instrumentation.

Fast Quantitative Analysis Of Museum Objects Using Laser-Induced Breakdown Spectroscopy And Multiple Regression Algorithms

NASA Astrophysics Data System (ADS)

Lorenzetti, G.; Foresta, A.; Palleschi, V.; Legnaioli, S.

2009-09-01

The recent development of mobile instrumentation, specifically devoted to in situ analysis and study of museum objects, allows the acquisition of many LIBS spectra in very short time. However, such large amount of data calls for new analytical approaches which would guarantee a prompt analysis of the results obtained. In this communication, we will present and discuss the advantages of statistical analytical methods, such as Partial Least Squares Multiple Regression algorithms vs. the classical calibration curve approach. PLS algorithms allows to obtain in real time the information on the composition of the objects under study; this feature of the method, compared to the traditional off-line analysis of the data, is extremely useful for the optimization of the measurement times and number of points associated with the analysis. In fact, the real time availability of the compositional information gives the possibility of concentrating the attention on the most `interesting' parts of the object, without over-sampling the zones which would not provide useful information for the scholars or the conservators. Some example on the applications of this method will be presented, including the studies recently performed by the researcher of the Applied Laser Spectroscopy Laboratory on museum bronze objects.

Design Challenges of Power Systems for Instrumented Spacecraft with Very Low Perigees in the Earth's Ionosphere

NASA Technical Reports Server (NTRS)

Moran, Vickie Eakin; Manzer, Dominic D.; Pfaff, Robert E.; Grebowsky, Joseph M.; Gervin, Jan C.

1999-01-01

Designing a solar array to power a spacecraft bus supporting a set of instruments making in situ plasma and neutral atmosphere measurements in the ionosphere at altitudes of 120km or lower poses several challenges. The driving scientific requirements are the field-of-view constraints of the instruments resulting in a three-axis stabilized spacecraft, the need for an electromagnetically unperturbed environment accomplished by designing an electrostatically conducting solar array surface to avoid large potentials, making the spacecraft body as small and as symmetric as possible, and body-mounting the solar array. Furthermore, the life and thermal constraints, in the midst of the effects of the dense atmosphere at low altitude, drive the cross-sectional area of the spacecraft to be small particularly normal to the ram direction. Widely varying sun angles and eclipse durations add further complications, as does the growing desire for multiple spacecraft to resolve spatial and temporal variations packaged into a single launch vehicle. Novel approaches to insure adequate orbit-averaged power levels of approximately 250W include an oval-shaped cross section to increase the solar array collecting area during noon-midnight orbits and the use of a flywheel energy storage system. The flywheel could also be used to help maintain the spacecraft's attitude, particularly during excursions to the lowest perigee altitudes. This paper discusses the approaches used in conceptual power designs for both the proposed Dipper and the Global Electrodynamics Connections (GEC) Mission currently being studied at the NASA/Goddard Space Flight Center.

Multiparametric Experiments and Multiparametric Setups for Metering Explosive Eruptions

NASA Astrophysics Data System (ADS)

Taddeucci, J.; Scarlato, P.; Del Bello, E.

2016-12-01

Explosive eruptions are multifaceted processes best studied by integrating a variety of observational perspectives. This need marries well with the continuous stream of new means that technological progress provides to volcanologists to parameterize these eruptions. Since decades, new technologies have been tested and integrated approaches have been attempted during so-called multiparametric experiments, i.e., short field campaigns with many, different instruments (and scientists) targeting natural laboratory volcanoes. Recently, portable multiparametric setups have been developed, including a few, highly complementary instruments to be rapidly deployed at any erupting volcano. Multiparametric experiments and setups share most of their challenges, like technical issues, site logistics, and data processing and interpretation. Our FAMoUS (FAst MUltiparametric Setup) setup pivots around coupled, high-speed imaging (visible and thermal) and acoustic (infrasonic to audible) recording, plus occasional seismic recording and sample collection. FAMoUS provided new insights on pyroclasts ejection and settling and jet noise dynamics at volcanoes worldwide. In the last years we conducted a series of BAcIO (Broadband ACquisition and Imaging Operation) experiments at Stromboli (Italy). These hosted state-of-the-art and prototypal eruption-metering technologies, including: multiple high-speed high-definition cameras for 3-D imaging; combined visible-infrared-ultraviolet imaging; in-situ and remote gas measurements; UAV aerial surveys; Doppler radar, and microphone arrays. This combined approach provides new understandings of the fundamental controls of Strombolian-style activity, and allows for crucial cross-validation of instruments and techniques. Several documentary expeditions participated in the BAcIO, attesting its tremendous potential for public outreach. Finally, sharing field work promotes interdisciplinary discussions and cooperation like nothing in the world.

A study of low cost approaches to scientific experiment implementation for shuttle launched and serviced automated spacecraft

NASA Technical Reports Server (NTRS)

1975-01-01

Cost reductions that can be obtained in experiment instrumentation by the use of standardized electronics and by the relaxation of instrument reliability requirements are studied. The feasibility of using standardized equipment for experiment instrumentation is assessed and a system design approach that most effectively incorporates standardized equipment is developed. The level and form of modularization that is appropriate for the standardized equipment is determined. Mission assurance aspects of instrument development are examined to determine the cost reductions that might be derived from the relaxation of reliability requirements and to formulate a systematic approach to the optimization of mission assurance cost reductions. The results of the analyses are applied to a representative model HEAO payload in order to provide a concrete example of the cost reductions that can be achieved by a standardized approach to the instrument electronics.

78 FR 41290 - Establishment of Class E Airspace; Elbow Lake, MN

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-10

...) Standard Instrument Approach Procedures at Elbow Lake Municipal--Pride of the Prairie Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the... instrument approach procedures at the airport. This action enhances the safety and management of IFR...

76 FR 66854 - Amendment of Class E Airspace; Nuiqsut, AK

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... Nuiqsut, AK, to accommodate the amendment of two standard instrument approach procedures at the Nuiqsut Airport. The FAA is taking this action to enhance safety and management of Instrument Flight Rules (IFR..., Nuiqsut, AK, to accommodate the amendment of a two standard instrument approach procedures. The Class E...

76 FR 21826 - Proposed Amendment of Class E Airspace; Drummond Island, MI

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-19

... necessary to accommodate new Standard Instrument Approach Procedures at Drummond Island Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations at... standard instrument approach procedures at Drummond Island Airport, Drummond Island, MI. Adjustments to the...

76 FR 28684 - Proposed Amendment of Class D Airspace; Denton, TX

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-18

... accommodate new Standard Instrument Approach Procedures at Denton Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations at the airport... from the surface up to but not including 2,500 feet for standard instrument approach procedures at...

78 FR 18262 - Proposed Amendment of Class E Airspace; Ogallala, NE

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... accommodate new Standard Instrument Approach Procedures (SIAP) at Searle Field Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the... standard instrument approach procedures at Searle Field Airport, Ogallala, NE. A small segment would extend...

78 FR 18261 - Proposed Amendment of Class E Airspace; Gruver, TX

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... Standard Instrument Approach Procedures (SIAP) at Gruver Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the... the airport is available to contain aircraft executing new standard instrument approach procedures at...

77 FR 29874 - Establishment of Class E Airspace; Freer, TX

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... Instrument Approach Procedures at Seven C's Ranch Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES: Effective date... accommodate new standard instrument approach procedures at Seven C's Ranch Airport, Freer, TX. This action is...

78 FR 52085 - Establishment of Class E Airspace; Stockton, KS

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-22

... Instrument Approach Procedures at Rooks County Regional Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES: Effective Date... radius to 10.1 miles south of the airport to contain aircraft executing new standard instrument approach...

77 FR 29872 - Establishment of Class E Airspace; Pender, NE

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... Instrument Approach Procedures at Pender Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES: Effective date... extending upward from 700 feet above the surface to accommodate new standard instrument approach procedures...

77 FR 29871 - Establishment of Class E Airspace; Red Cloud, NE

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... Instrument Approach Procedures at Red Cloud Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES: Effective date... to accommodate new standard instrument approach procedures at Red Cloud Municipal Airport, Red Cloud...

A probabilistic model of cross-categorization.

PubMed

Shafto, Patrick; Kemp, Charles; Mansinghka, Vikash; Tenenbaum, Joshua B

2011-07-01

Most natural domains can be represented in multiple ways: we can categorize foods in terms of their nutritional content or social role, animals in terms of their taxonomic groupings or their ecological niches, and musical instruments in terms of their taxonomic categories or social uses. Previous approaches to modeling human categorization have largely ignored the problem of cross-categorization, focusing on learning just a single system of categories that explains all of the features. Cross-categorization presents a difficult problem: how can we infer categories without first knowing which features the categories are meant to explain? We present a novel model that suggests that human cross-categorization is a result of joint inference about multiple systems of categories and the features that they explain. We also formalize two commonly proposed alternative explanations for cross-categorization behavior: a features-first and an objects-first approach. The features-first approach suggests that cross-categorization is a consequence of attentional processes, where features are selected by an attentional mechanism first and categories are derived second. The objects-first approach suggests that cross-categorization is a consequence of repeated, sequential attempts to explain features, where categories are derived first, then features that are poorly explained are recategorized. We present two sets of simulations and experiments testing the models' predictions about human categorization. We find that an approach based on joint inference provides the best fit to human categorization behavior, and we suggest that a full account of human category learning will need to incorporate something akin to these capabilities. Copyright © 2011 Elsevier B.V. All rights reserved.

General Aviation Flight Test of Advanced Operations Enabled by Synthetic Vision

NASA Technical Reports Server (NTRS)

Glaab, Louis J.; Hughhes, Monica F.; Parrish, Russell V.; Takallu, Mohammad A.

2014-01-01

A flight test was performed to compare the use of three advanced primary flight and navigation display concepts to a baseline, round-dial concept to assess the potential for advanced operations. The displays were evaluated during visual and instrument approach procedures including an advanced instrument approach resembling a visual airport traffic pattern. Nineteen pilots from three pilot groups, reflecting the diverse piloting skills of the General Aviation pilot population, served as evaluation subjects. The experiment had two thrusts: 1) an examination of the capabilities of low-time (i.e., <400 hours), non-instrument-rated pilots to perform nominal instrument approaches, and 2) an exploration of potential advanced Visual Meteorological Conditions (VMC)-like approaches in Instrument Meteorological Conditions (IMC). Within this context, advanced display concepts are considered to include integrated navigation and primary flight displays with either aircraft attitude flight directors or Highway In The Sky (HITS) guidance with and without a synthetic depiction of the external visuals (i.e., synthetic vision). Relative to the first thrust, the results indicate that using an advanced display concept, as tested herein, low-time, non-instrument-rated pilots can exhibit flight-technical performance, subjective workload and situation awareness ratings as good as or better than high-time Instrument Flight Rules (IFR)-rated pilots using Baseline Round Dials for a nominal IMC approach. For the second thrust, the results indicate advanced VMC-like approaches are feasible in IMC, for all pilot groups tested for only the Synthetic Vision System (SVS) advanced display concept.

An item response curves analysis of the Force Concept Inventory

NASA Astrophysics Data System (ADS)

Morris, Gary A.; Harshman, Nathan; Branum-Martin, Lee; Mazur, Eric; Mzoughi, Taha; Baker, Stephen D.

2012-09-01

Several years ago, we introduced the idea of item response curves (IRC), a simplistic form of item response theory (IRT), to the physics education research community as a way to examine item performance on diagnostic instruments such as the Force Concept Inventory (FCI). We noted that a full-blown analysis using IRT would be a next logical step, which several authors have since taken. In this paper, we show that our simple approach not only yields similar conclusions in the analysis of the performance of items on the FCI to the more sophisticated and complex IRT analyses but also permits additional insights by characterizing both the correct and incorrect answer choices. Our IRC approach can be applied to a variety of multiple-choice assessments but, as applied to a carefully designed instrument such as the FCI, allows us to probe student understanding as a function of ability level through an examination of each answer choice. We imagine that physics teachers could use IRC analysis to identify prominent misconceptions and tailor their instruction to combat those misconceptions, fulfilling the FCI authors' original intentions for its use. Furthermore, the IRC analysis can assist test designers to improve their assessments by identifying nonfunctioning distractors that can be replaced with distractors attractive to students at various ability levels.

NASA Icing Remote Sensing System Comparisons From AIRS II

NASA Technical Reports Server (NTRS)

Reehorst, Andrew L.; Brinker, David J.; Ratvasky, Thomas P.

2005-01-01

NASA has an on-going activity to develop remote sensing technologies for the detection and measurement of icing conditions aloft. A multiple instrument approach is the current emphasis of this activity. Utilizing radar, radiometry, and lidar, a region of supercooled liquid is identified. If the liquid water content (LWC) is sufficiently high, then the region of supercooled liquid cloud is flagged as being an aviation hazard. The instruments utilized for the current effort are an X-band vertical staring radar, a radiometer that measures twelve frequencies between 22 and 59 GHz, and a lidar ceilometer. The radar data determine cloud boundaries, the radiometer determines the sub-freezing temperature heights and total liquid water content, and the ceilometer refines the lower cloud boundary. Data is post-processed with a LabVIEW program with a resultant supercooled LWC profile and aircraft hazard identification. Individual remotely sensed measurements gathered during the 2003-2004 Alliance Icing Research Study (AIRS II) were compared to aircraft in-situ measurements. Comparisons between the remote sensing system s fused icing product and in-situ measurements from the research aircraft are reviewed here. While there are areas where improvement can be made, the cases examined indicate that the fused sensor remote sensing technique appears to be a valid approach.

Development and Application of a Novel Rasch-based Methodology for Evaluating Multi-Tiered Assessment Instruments: Validation and utilization of an undergraduate diagnostic test of the water cycle

NASA Astrophysics Data System (ADS)

Romine, William L.; Schaffer, Dane L.; Barrow, Lloyd

2015-11-01

We describe the development and validation of a three-tiered diagnostic test of the water cycle (DTWC) and use it to evaluate the impact of prior learning experiences on undergraduates' misconceptions. While most approaches to instrument validation take a positivist perspective using singular criteria such as reliability and fit with a measurement model, we extend this to a multi-tiered approach which supports multiple interpretations. Using a sample of 130 undergraduate students from two colleges, we utilize the Rasch model to place students and items along traditional one-, two-, and three-tiered scales as well as a misconceptions scale. In the three-tiered and misconceptions scales, high confidence was indicative of mastery. In the latter scale, a 'misconception' was defined as mastery of an incorrect concept. We found that integrating confidence into mastery did little to change item functioning; however, three-tiered usage resulted in higher reliability and lower student ability estimates than two-tiered usage. The misconceptions scale showed high efficacy in predicting items on which particular students were likely to express misconceptions, and revealed several tenacious misconceptions that all students were likely to express regardless of ability. Previous coursework on the water cycle did little to change the prevalence of undergraduates' misconceptions.

Instrumental intelligent test of food sensory quality as mimic of human panel test combining multiple cross-perception sensors and data fusion.

PubMed

Ouyang, Qin; Zhao, Jiewen; Chen, Quansheng

2014-09-02

Instrumental test of food quality using perception sensors instead of human panel test is attracting massive attention recently. A novel cross-perception multi-sensors data fusion imitating multiple mammal perception was proposed for the instrumental test in this work. First, three mimic sensors of electronic eye, electronic nose and electronic tongue were used in sequence for data acquisition of rice wine samples. Then all data from the three different sensors were preprocessed and merged. Next, three cross-perception variables i.e., color, aroma and taste, were constructed using principal components analysis (PCA) and multiple linear regression (MLR) which were used as the input of models. MLR, back-propagation artificial neural network (BPANN) and support vector machine (SVM) were comparatively used for modeling, and the instrumental test was achieved for the comprehensive quality of samples. Results showed the proposed cross-perception multi-sensors data fusion presented obvious superiority to the traditional data fusion methodologies, also achieved a high correlation coefficient (>90%) with the human panel test results. This work demonstrated that the instrumental test based on the cross-perception multi-sensors data fusion can actually mimic the human test behavior, therefore is of great significance to ensure the quality of products and decrease the loss of the manufacturers. Copyright © 2014 Elsevier B.V. All rights reserved.

1024-channel portable gamma-ray spectrometer

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGibbon, A.L.

An instrument is described which is designed to determine radioactive isotope spectra in the field under adverse environmental conditions. The instrument is battery-powered, stores and compares multiple spectra, and performs computations upon the resulting displayed graph. (auth)

Cross-cultural adaptation of instruments assessing breastfeeding determinants: a multi-step approach

PubMed Central

2014-01-01

Background Cross-cultural adaptation is a necessary process to effectively use existing instruments in other cultural and language settings. The process of cross-culturally adapting, including translation, of existing instruments is considered a critical set to establishing a meaningful instrument for use in another setting. Using a multi-step approach is considered best practice in achieving cultural and semantic equivalence of the adapted version. We aimed to ensure the content validity of our instruments in the cultural context of KwaZulu-Natal, South Africa. Methods The Iowa Infant Feeding Attitudes Scale, Breastfeeding Self-Efficacy Scale-Short Form and additional items comprise our consolidated instrument, which was cross-culturally adapted utilizing a multi-step approach during August 2012. Cross-cultural adaptation was achieved through steps to maintain content validity and attain semantic equivalence in the target version. Specifically, Lynn’s recommendation to apply an item-level content validity index score was followed. The revised instrument was translated and back-translated. To ensure semantic equivalence, Brislin’s back-translation approach was utilized followed by the committee review to address any discrepancies that emerged from translation. Results Our consolidated instrument was adapted to be culturally relevant and translated to yield more reliable and valid results for use in our larger research study to measure infant feeding determinants effectively in our target cultural context. Conclusions Undertaking rigorous steps to effectively ensure cross-cultural adaptation increases our confidence that the conclusions we make based on our self-report instrument(s) will be stronger. In this way, our aim to achieve strong cross-cultural adaptation of our consolidated instruments was achieved while also providing a clear framework for other researchers choosing to utilize existing instruments for work in other cultural, geographic and population settings. PMID:25285151

Participatory Design in Gerontechnology: A Systematic Literature Review.

PubMed

Merkel, Sebastian; Kucharski, Alexander

2018-05-19

Participatory design (PD) is widely used within gerontechnology but there is no common understanding about which methods are used for what purposes. This review aims to examine what different forms of PD exist in the field of gerontechnology and how these can be categorized. We conducted a systematic literature review covering several databases. The search strategy was based on 3 elements: (1) participatory methods and approaches with (2) older persons aiming at developing (3) technology for older people. Our final review included 26 studies representing a variety of technologies designed/developed and methods/instruments applied. According to the technologies, the publications reviewed can be categorized in 3 groups: Studies that (1) use already existing technology with the aim to find new ways of use; (2) aim at creating new devices; (3) test and/or modify prototypes. The implementation of PD depends on the questions: Why a participatory approach is applied, who is involved as future user(s), when those future users are involved, and how they are incorporated into the innovation process. There are multiple ways, methods, and instruments to integrate users into the innovation process. Which methods should be applied, depends on the context. However, most studies do not evaluate if participatory approaches will lead to a better acceptance and/or use of the co-developed products. Therefore, participatory design should follow a comprehensive strategy, starting with the users' needs and ending with an evaluation if the applied methods have led to better results.

Navigating the Perfect Storm: Research Strategies for Socialecological Systems in a Rapidly Evolving World

NASA Astrophysics Data System (ADS)

Dearing, John A.; Bullock, Seth; Costanza, Robert; Dawson, Terry P.; Edwards, Mary E.; Poppy, Guy M.; Smith, Graham M.

2012-04-01

The `Perfect Storm' metaphor describes a combination of events that causes a surprising or dramatic impact. It lends an evolutionary perspective to how social-ecological interactions change. Thus, we argue that an improved understanding of how social-ecological systems have evolved up to the present is necessary for the modelling, understanding and anticipation of current and future social-ecological systems. Here we consider the implications of an evolutionary perspective for designing research approaches. One desirable approach is the creation of multi-decadal records produced by integrating palaeoenvironmental, instrument and documentary sources at multiple spatial scales. We also consider the potential for improved analytical and modelling approaches by developing system dynamical, cellular and agent-based models, observing complex behaviour in social-ecological systems against which to test systems dynamical theory, and drawing better lessons from history. Alongside these is the need to find more appropriate ways to communicate complex systems, risk and uncertainty to the public and to policy-makers.

"I just had to be flexible and show good patience": management of interactional approaches to enact mentoring roles by peer mentors with developmental disabilities.

PubMed

Schwartz, Ariel E; Kramer, Jessica M

2017-06-08

Peer mentoring may be an effective approach for fostering skill development for mentors and mentees with developmental disabilities. However, little is known about how mentors with developmental disabilities perceive and enact their roles. (1) How do young adults with developmental disabilities describe their role as a peer mentor in the context of instrumental peer mentoring? (2) How do they enact their perceived roles? Thematic analysis of semi-structured reflections completed by six mentors with developmental disabilities (ages 17-35) with multiple mentoring experiences. Mentors perceived themselves as professionals with a primary role of teaching, and for some mentoring relationships, a secondary role of developing an interpersonal relationship. To enact these roles, mentors used a supportive interactional approach characterized by actions such as encouragement and sharing examples and dispositions, such as flexibility and patience. Mentors monitored mentee learning and engagement within the mentoring session and, as needed, adjusted their approach to optimize mentee learning and engagement. To successfully manage their interactional approach, mentors used supports such as peer mentoring scripts, tip sheets, and supervisors. While mentors reported several actions for teaching, they may benefit from training to learn approaches to facilitate more consistent development of interpersonal relationships. Implications for Rehabilitation Peer mentoring may be an effective approach for fostering skill development for young adult mentors and mentees with developmental disabilities. In this study, young adult peer mentors with developmental disabilities perceived themselves as professionals with a primary role of teaching and a secondary role of developing an interpersonal relationship. Peer mentors used actions and dispositions that matched their perceived roles and supported mentees with developmental disabilities to engage in instrumental mentoring. With supports and training, young adults with developmental disabilities can successfully execute the complex relational and teaching tasks required of peer mentoring.

Evaluating Secondary Students' Scientific Reasoning in Genetics Using a Two-Tier Diagnostic Instrument

NASA Astrophysics Data System (ADS)

Tsui, Chi-Yan; Treagust, David

2010-05-01

While genetics has remained as one key topic in school science, it continues to be conceptually and linguistically difficult for students with the concomitant debates as to what should be taught in the age of biotechnology. This article documents the development and implementation of a two-tier multiple-choice instrument for diagnosing grades 10 and 12 students' understanding of genetics in terms of reasoning. The pretest and posttest forms of the diagnostic instrument were used alongside other methods in evaluating students' understanding of genetics in a case-based qualitative study on teaching and learning with multiple representations in three Western Australian secondary schools. Previous studies have shown that a two-tier diagnostic instrument is useful in probing students' understanding or misunderstanding of scientific concepts and ideas. The diagnostic instrument in this study was designed and then progressively refined, improved, and implemented to evaluate student understanding of genetics in three case schools. The final version of the instrument had Cronbach's alpha reliability of 0.75 and 0.64, respectively, for its pretest and the posttest forms when it was administered to a group of grade 12 students (n = 17). This two-tier diagnostic instrument complemented other qualitative data collection methods in this research in generating a more holistic picture of student conceptual learning of genetics in terms of scientific reasoning. Implications of the findings of this study using the diagnostic instrument are discussed.

Understanding cracking failures of coatings: A fracture mechanics approach

NASA Astrophysics Data System (ADS)

Kim, Sung-Ryong

A fracture mechanics analysis of coating (paint) cracking was developed. A strain energy release rate (G(sub c)) expression due to the formation of a new crack in a coating was derived for bending and tension loadings in terms of the moduli, thicknesses, Poisson's ratios, load, residual strain, etc. Four-point bending and instrumented impact tests were used to determine the in-situ fracture toughness of coatings as functions of increasing baking (drying) time. The system used was a thin coating layer on a thick substrate layer. The substrates included steel, aluminum, polycarbonate, acrylonitrile-butadiene-styrene (ABS), and Noryl. The coatings included newly developed automotive paints. The four-point bending configuration promoted nice transversed multiple coating cracks on both steel and polymeric substrates. The crosslinked type automotive coatings on steel substrates showed big cracks without microcracks. When theoretical predictions for energy release rate were compared to experimental data for coating/steel substrate samples with multiple cracking, the agreement was good. Crosslinked type coatings on polymeric substrates showed more cracks than theory predicted and the G(sub c)'s were high. Solvent evaporation type coatings on polymeric substrates showed clean multiple cracking and the G(sub c)'s were higher than those obtained by tension analysis of tension experiments with the same substrates. All the polymeric samples showed surface embrittlement after long baking times using four-point bending tests. The most apparent surface embrittlement was observed in the acrylonitrile-butadiene-styrene (ABS) substrate system. The impact properties of coatings as a function of baking time were also investigated. These experiments were performed using an instrumented impact tester. There was a rapid decrease in G(sub c) at short baking times and convergence to a constant value at long baking times. The surface embrittlement conditions and an embrittlement toughness were found upon impact loading. This analysis provides a basis for a quantitative approach to measuring coating toughness.

Under What Assumptions Do Site-by-Treatment Instruments Identify Average Causal Effects?

ERIC Educational Resources Information Center

Reardon, Sean F.; Raudenbush, Stephen W.

2011-01-01

The purpose of this paper is to clarify the assumptions that must be met if this--multiple site, multiple mediator--strategy, hereafter referred to as "MSMM," is to identify the average causal effects (ATE) in the populations of interest. The authors' investigation of the assumptions of the multiple-mediator, multiple-site IV model demonstrates…

Real-Time Assessment of Robot Performance during Remote Exploration Operations

DTIC Science & Technology

2009-03-01

degraded instruments (i.e., instrument performance) and to improve plant performance (e.g., increase thermal efficiency). Such degraded instrument...activities. Lidar is used for 3D terrain mapping. During reconnaissance, the rover acquires multiple scans to construct a panorama at specified...Metric Interpretation Operational Use Panorama in Progress Should be true while taking a panorama RO: indicates whether Lidar is functioning

A statistical approach to instrument calibration

Treesearch

Robert R. Ziemer; David Strauss

1978-01-01

Summary - It has been found that two instruments will yield different numerical values when used to measure identical points. A statistical approach is presented that can be used to approximate the error associated with the calibration of instruments. Included are standard statistical tests that can be used to determine if a number of successive calibrations of the...

78 FR 33265 - Proposed Establishment of Class E Airspace; Umatilla, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-04

...) Global Positioning System (GPS) Standard Instrument Approach Procedures at Umatilla Municipal Airport... (GPS) standard instrument approach procedures for Umatilla Municipal Airport. Controlled airspace...

A KPI-based process monitoring and fault detection framework for large-scale processes.

PubMed

Zhang, Kai; Shardt, Yuri A W; Chen, Zhiwen; Yang, Xu; Ding, Steven X; Peng, Kaixiang

2017-05-01

Large-scale processes, consisting of multiple interconnected subprocesses, are commonly encountered in industrial systems, whose performance needs to be determined. A common approach to this problem is to use a key performance indicator (KPI)-based approach. However, the different KPI-based approaches are not developed with a coherent and consistent framework. Thus, this paper proposes a framework for KPI-based process monitoring and fault detection (PM-FD) for large-scale industrial processes, which considers the static and dynamic relationships between process and KPI variables. For the static case, a least squares-based approach is developed that provides an explicit link with least-squares regression, which gives better performance than partial least squares. For the dynamic case, using the kernel representation of each subprocess, an instrument variable is used to reduce the dynamic case to the static case. This framework is applied to the TE benchmark process and the hot strip mill rolling process. The results show that the proposed method can detect faults better than previous methods. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Measuring Medical Housestaff Teamwork Performance Using Multiple Direct Observation Instruments: Comparing Apples and Apples.

PubMed

Weingart, Saul N; Yaghi, Omar; Wetherell, Matthew; Sweeney, Megan

2018-04-10

To examine the composition and concordance of existing instruments used to assess medical teams' performance. A trained observer joined 20 internal medicine housestaff teams for morning work rounds at Tufts Medical Center, a 415-bed Boston teaching hospital, from October through December 2015. The observer rated each team's performance using 9 teamwork observation instruments that examined domains including team structure, leadership, situation monitoring, mutual support, and communication. Observations recorded on paper forms were stored electronically. Scores were normalized from 1 (low) to 5 (high) to account for different rating scales. Overall mean scores were calculated and graphed; weighted scores adjusted for the number of items in each teamwork domain. Teamwork scores were analyzed using t-tests, pair-wise correlations, and the Kruskal-Wallis statistic, and team performance was compared across instruments by domain. The 9 tools incorporated 5 major domains, with 5-35 items per instrument for a total of 161 items per observation session. In weighted and unweighted analyses, the overall teamwork performance score for a given team on a given day varied by instrument. While all of the tools identified the same low outlier, high performers on some instruments were low performers on others. Inconsistent scores for a given team across instruments persisted in domain-level analyses. There was substantial variation in the rating of individual teams assessed concurrently by a single observer using multiple instruments. Since existing teamwork observation tools do not yield concordant assessments, researchers should create better tools for measuring teamwork performance.

A flexible CAMAC based data system for Space Shuttle scientific instruments

NASA Technical Reports Server (NTRS)

Ehrmann, C. H.; Baker, R. G.; Smith, R. L.; Kaminski, T. J.

1979-01-01

An effort has been made within NASA to produce a low-cost modular system for implementation of Shuttle payloads based on the CAMAC standards for packaging and data transfer. A key element of such a modular system is a means for controlling the data system, collecting and processing the data for transmission to the ground, and issuing commands to the instrument either from the ground or based on the data collected. A description is presented of such a means based on a network of digital processors and CAMAC crate controllers, which allows for the implementation of instruments ranging from those requiring only a single CAMAC crate of functional modules and no data processing to ones requiring multiple crates and multiple data processors.

The solar physics Shuttle/Spacelab program and its relationship to studies of the flare build-up

NASA Technical Reports Server (NTRS)

Neupert, W. M.

1976-01-01

The main phase of solar physics (including flare-buildup) research on Shuttle/Spacelab during the 1980s centers around the use of facility instruments for multiple-user, multiple flight operations. Three main facilities are being considered: a meter-class optical telescope for visible and near-UV wavelengths, an EUV/XUV/soft X-ray facility, and a hard X-ray imaging facility (including a full-sun 5-600 keV spectrometer, a nuclear gamma ray spectrometer, and an X-ray polarimeter for the 5-100 keV range). Smaller instruments designed for specific observations and other classes of instruments such as solar monitors that are not on the facility level are also being considered.

[Systematic development of a scale for determination of health-related quality of life in multiple trauma patients. The Polytrauma Outcome (POLO) Chart].

PubMed

Pirente, N; Bouillon, B; Schäfer, B; Raum, M; Helling, H J; Berger, E; Neugebauer, E

2002-05-01

Even years after having sustained multiple injuries patients often suffer from its sequelae. These comprise restrictions in physical function, but also pain, social and psychological impairments. Although the Meran Consensus Conference in 1990 defined the contents of "quality of life" (QoL) measures in surgery, still no instrument is available for the valid assessment of all relevant QoL domains in multiple injured patients. This paper describes the systematic development of a modular instrument for the assessment of health related QoL. Within three phases (phase I: generation of items, phase II: item reduction, phase III: pre-testing in 70 multiple injured and control patients) a questionnaire of 57 items was developed, which measures all relevant trauma-related aspects of QoL after acute hospital care. In combination with the Glascow Outcome Scale (GOS), the EUROQOL and the SF-36, the newly developed instrument builds the Polytrauma Outcome Chart (POLO-Chart) which will also be used as "Part E" for outcome assessment within the "Trauma registry" of the German Society for Trauma Surgery. In phase IV, the POLO-Chart will finally be validated in five trauma centres (Celle, Essen, Hanover, Cologne und Munich).

Questionnaires that screen for multiple sleep disorders.

PubMed

Klingman, Karen J; Jungquist, Carla R; Perlis, Michael L

2017-04-01

The goal of this review was to identify, describe, and evaluate the existing multiple sleep disorders screening questionnaires for their comprehensiveness, brevity, and psychometric quality. A systematic review was conducted using Medline/PubMed, cumulative index to nursing & allied health literature, health and psychosocial instruments and the "grey literature". Search terms were "sleep disorders, screening, questionnaires, and psychometrics". The scope of the search was limited to English language articles for adult age groups from 1989 through 2015. Of the n = 2812 articles identified, most were assessment or treatment guideline reviews, topical reviews, and/or empirical articles. Seven of the articles described multiple sleep disorders screening instruments. Of the identified instruments, two questionnaires (the Holland sleep Disorders questionnaire and sleep-50) were evaluated as comprehensive and one questionnaire (the global sleep assessment questionnaire [GSAQ]) was judged to be both comprehensive and efficient. The GSAQ was found to cover four of the six core intrinsic disorders, sleep insufficiency, and daytime sequela with 11 questions. Accordingly, the GSAQ is the most suitable for application as a general sleep disorders screener. Additional work is required to validate this instrument in the context of primary care. Finally, the future development of multiple sleep disorders screening questionnaires should not only cover all six intrinsic sleep disorders but also acquire some basic demographic information (age, sex, body mass index, presence/absence of bed partner, work status and shift) and some limited data regarding sleep sufficiency and the daytime consequences of sleep disturbance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Small aperture seismic arrays for studying planetary interiors and seismicity

NASA Astrophysics Data System (ADS)

Schmerr, N. C.; Lekic, V.; Fouch, M. J.; Panning, M. P.; Siegler, M.; Weber, R. C.

2017-12-01

Seismic arrays are a powerful tool for understanding the interior structure and seismicity across objects in the Solar System. Given the operational constraints of ground-based lander investigations, a small aperture seismic array can provide many of the benefits of a larger-scale network, but does not necessitate a global deployment of instrumentation. Here we define a small aperture array as a deployment of multiple seismometers, with a separation between instruments of 1-1000 meters. For example, small aperture seismic arrays have been deployed on the Moon during the Apollo program, the Active Seismic Experiments of Apollo 14 and 16, and the Lunar Seismic Profiling Experiment deployed by the Apollo 17 astronauts. Both were high frequency geophone arrays with spacing of 50 meters that provided information on the layering and velocity structure of the uppermost kilometer of the lunar crust. Ideally such arrays would consist of instruments that are 3-axis short period or broadband seismometers. The instruments must have a sampling rate and frequency range sensitivity capable of distinguishing between waves arriving at each station in the array. Both terrestrial analogs and the data retrieved from the Apollo arrays demonstrate the efficacy of this approach. Future opportunities exist for deployment of seismic arrays on Europa, asteroids, and other objects throughout the Solar System. Here we will present both observational data and 3-D synthetic modeling results that reveal the sensing requirements and the primary advantages of a small aperture seismic array over single station approach. For example, at the smallest apertures of < 1 m, we constrain that sampling rates must exceed 500 Hz and instrument sensitivity must extend to 100 Hz or greater. Such advantages include the improved ability to resolve the location of the sources near the array through detection of backazimuth and differential timing between stations, determination of the small-scale structure (layering, scattering bodies, density and velocity variations) in the vicinity of the array, as well as the ability to improve the signal to noise ratio of distant body waves by additive methods such as stacking and velocity-slowness analysis. These results will inform future missions on the surfaces of objects throughout the Solar System.

The Sound Access Parent Outcomes Instrument (SAPOI): Construction of a new instrument for children with severe multiple disabilities who use cochlear implants or hearing aids.

PubMed

Hayward, Denyse V; Ritter, Kathryn; Mousavi, Amin; Vatanapour, Shabnam

2016-01-01

To report on the Phase 2 development of the Sound Access Parent Outcomes Instrument (SAPOI), a new instrument focused on formalizing outcomes that parents of children with severe multiple disabilities (SMD) who use amplification prioritize as important. Phase 2 of this project involved item selection and refinement of the SAPOI based on (a) Phase 1 study participant input, (b) clinical specialist feedback, and (c) test-retest instrument reliability. Phase 1 participant responses were utilized to construct a draft version of the SAPOI. Next, clinical specialists examined the instrument for content validity and utility and instrument reliability was examined through a test-retest process with parents of children with SMD. The draft SAPOI was constructed based on Phase 1 participant input. Clinical specialists supported content validity and utility of the instrument and the inclusion of 19 additional items across four categories, namely Child Affect, Child Interaction, Parent Well-being, and Child's Device Use. The SAPOI was completed twice at one-month intervals by parents of children with SMD to examine instrument reliability across the four categories (Child Affect, Child Interaction, Parent Well-being, and Child's Device Use). Instrument reliability was strong-to-excellent across all four sections. The SAPOI shows promise as a much-needed addition to the assessment battery currently used for children with SMD who use cochlear implants and hearing aids. It provides valuable information regarding outcomes resulting from access to sound in this population that currently used assessments do not identify.

The HYDICE instrument design and its application to planetary instruments

NASA Technical Reports Server (NTRS)

Basedow, R.; Silverglate, P.; Rappoport, W.; Rockwell, R.; Rosenberg, D.; Shu, K.; Whittlesey, R.; Zalewski, E.

1993-01-01

The Hyperspectral Digital Imagery Collection Experiment (HYDICE) instrument represents a significant advance in the state of the art in hyperspectral sensors. It combines a higher signal-to-noise ratio (SNR) and significantly better spatial and spectral resolution and radio metric accuracy than systems flying on aircraft today. The need for 'clean' data, i.e., data free of sampling artifacts and excessive spatial or spectral noise, is a key driver behind the difficult combination of performance requirements laid out for HYDICE. Most of these involve the sensor optics and detector. This paper presents an optimized approach to those requirements, one that comprises push broom scanning, a single, mechanically cooled focal plane, a double-pass prism spectrometer, and an easily fabricated yet wide-field telescope. Central to the approach is a detector array that covers the entire spectrum from 0.4 to 2.5 microns. Among the major benefits conferred by such a design are optical and mechanical simplicity, low polarization sensitivity, and coverage of the entire spectrum without suffering the spectral gaps caused by beam splitters. The overall system minimizes interfaces to the C-141 aircraft on which it will be flown, can be calibrated on the ground and in flight to accuracies better than those required, and is designed for simple, push-button operation. Only unprocessed data are recorded during flight. A ground data processing station provides quick-look, calibration correction, and archiving capabilities, with a throughput better than the requirements. Overall performance of the system is expected to provide the solid database required to evaluate the potential of hyperspectral imagery in a wide variety of applications. HYDICE can be regarded as a test bed for future planetary instruments. The ability to spectrally image a wide field of view over multiple spectral octaves offers obvious advantages and is expected to maximize science return for the required cost and weight.

Validity and reliability of the multidimensional assessment of fatigue scale in Iranian patients with relapsing-remitting subtype of multiple sclerosis.

PubMed

Behrangrad, Shabnam; Kordi Yoosefinejad, Amin

2018-03-01

The purpose of this study is to investigate the validity and reliability of the Persian version of the Multidimensional Assessment of Fatigue Scale (MAFS) in an Iranian population with multiple sclerosis. A self-reported survey on fatigue including the MAFS, Fatigue Impact Scale and demographic measures was completed by 130 patients with multiple sclerosis and 60 healthy persons sampled with a convenience method. Test-retest reliability and validity were evaluated 3 days apart. Construct validity of the MAFS was assessed with the Fatigue Impact Scale. The MAFS had high internal consistency (Cronbach's alpha >0.9) and 3-d test-retest reliability (intraclass correlation coefficient = 0.99). Correlation between the Fatigue Impact Scale and MAFS was high (r = 0.99). Correlation between MAFS scores and the Expanded Disability Status Scale was also strong (r = 0.85). Questionnaire items showed acceptable item-scale correlation (0.968-0.993). The Persian version of the MAFS appears to be a valid and reliable questionnaire. It is an appropriate short multidimensional instrument to assess fatigue in patients with multiple sclerosis in clinical practice and research. Implications for Rehabilitation The Persian version of Multidimensional Assessment of Fatigue is a valid and reliable instrument for the assessment and monitoring the fatigue in Persian-language patients with multiple sclerosis. It is very easy to administer and a time efficient scale in comparison to other instruments evaluating fatigue in patients with multiple sclerosis.

Resource Document for the Design of Electronic Instrument Approach Procedure Displays

DOT National Transportation Integrated Search

1995-03-01

Instrument approach procedure (IAP) charts play a large role in contributing to the success or failure of approaches and : landings. Paper IAP charts have been criticized for excessive clutter, for text sizes that are too small to read, and : for ina...

Design of Instrument Approach Procedure Charts Comprehension Speed of Missed Approach Instructions Coded in Text or Icons

DOT National Transportation Integrated Search

1992-02-01

Instrument approach procedure (IAP) charts are often cluttered and confusing. The quantified effects of chart design : changes on information transfer are needed by chart manufacturers to make changes uhich will enhance information transfer : and hum...

Design, implementation and multisite evaluation of a system suitability protocol for the quantitative assessment of instrument performance in liquid chromatography-multiple reaction monitoring-MS (LC-MRM-MS).

PubMed

Abbatiello, Susan E; Mani, D R; Schilling, Birgit; Maclean, Brendan; Zimmerman, Lisa J; Feng, Xingdong; Cusack, Michael P; Sedransk, Nell; Hall, Steven C; Addona, Terri; Allen, Simon; Dodder, Nathan G; Ghosh, Mousumi; Held, Jason M; Hedrick, Victoria; Inerowicz, H Dorota; Jackson, Angela; Keshishian, Hasmik; Kim, Jong Won; Lyssand, John S; Riley, C Paige; Rudnick, Paul; Sadowski, Pawel; Shaddox, Kent; Smith, Derek; Tomazela, Daniela; Wahlander, Asa; Waldemarson, Sofia; Whitwell, Corbin A; You, Jinsam; Zhang, Shucha; Kinsinger, Christopher R; Mesri, Mehdi; Rodriguez, Henry; Borchers, Christoph H; Buck, Charles; Fisher, Susan J; Gibson, Bradford W; Liebler, Daniel; Maccoss, Michael; Neubert, Thomas A; Paulovich, Amanda; Regnier, Fred; Skates, Steven J; Tempst, Paul; Wang, Mu; Carr, Steven A

2013-09-01

Multiple reaction monitoring (MRM) mass spectrometry coupled with stable isotope dilution (SID) and liquid chromatography (LC) is increasingly used in biological and clinical studies for precise and reproducible quantification of peptides and proteins in complex sample matrices. Robust LC-SID-MRM-MS-based assays that can be replicated across laboratories and ultimately in clinical laboratory settings require standardized protocols to demonstrate that the analysis platforms are performing adequately. We developed a system suitability protocol (SSP), which employs a predigested mixture of six proteins, to facilitate performance evaluation of LC-SID-MRM-MS instrument platforms, configured with nanoflow-LC systems interfaced to triple quadrupole mass spectrometers. The SSP was designed for use with low multiplex analyses as well as high multiplex approaches when software-driven scheduling of data acquisition is required. Performance was assessed by monitoring of a range of chromatographic and mass spectrometric metrics including peak width, chromatographic resolution, peak capacity, and the variability in peak area and analyte retention time (RT) stability. The SSP, which was evaluated in 11 laboratories on a total of 15 different instruments, enabled early diagnoses of LC and MS anomalies that indicated suboptimal LC-MRM-MS performance. The observed range in variation of each of the metrics scrutinized serves to define the criteria for optimized LC-SID-MRM-MS platforms for routine use, with pass/fail criteria for system suitability performance measures defined as peak area coefficient of variation <0.15, peak width coefficient of variation <0.15, standard deviation of RT <0.15 min (9 s), and the RT drift <0.5min (30 s). The deleterious effect of a marginally performing LC-SID-MRM-MS system on the limit of quantification (LOQ) in targeted quantitative assays illustrates the use and need for a SSP to establish robust and reliable system performance. Use of a SSP helps to ensure that analyte quantification measurements can be replicated with good precision within and across multiple laboratories and should facilitate more widespread use of MRM-MS technology by the basic biomedical and clinical laboratory research communities.

Design, Implementation and Multisite Evaluation of a System Suitability Protocol for the Quantitative Assessment of Instrument Performance in Liquid Chromatography-Multiple Reaction Monitoring-MS (LC-MRM-MS)*

PubMed Central

Abbatiello, Susan E.; Mani, D. R.; Schilling, Birgit; MacLean, Brendan; Zimmerman, Lisa J.; Feng, Xingdong; Cusack, Michael P.; Sedransk, Nell; Hall, Steven C.; Addona, Terri; Allen, Simon; Dodder, Nathan G.; Ghosh, Mousumi; Held, Jason M.; Hedrick, Victoria; Inerowicz, H. Dorota; Jackson, Angela; Keshishian, Hasmik; Kim, Jong Won; Lyssand, John S.; Riley, C. Paige; Rudnick, Paul; Sadowski, Pawel; Shaddox, Kent; Smith, Derek; Tomazela, Daniela; Wahlander, Asa; Waldemarson, Sofia; Whitwell, Corbin A.; You, Jinsam; Zhang, Shucha; Kinsinger, Christopher R.; Mesri, Mehdi; Rodriguez, Henry; Borchers, Christoph H.; Buck, Charles; Fisher, Susan J.; Gibson, Bradford W.; Liebler, Daniel; MacCoss, Michael; Neubert, Thomas A.; Paulovich, Amanda; Regnier, Fred; Skates, Steven J.; Tempst, Paul; Wang, Mu; Carr, Steven A.

2013-01-01

Multiple reaction monitoring (MRM) mass spectrometry coupled with stable isotope dilution (SID) and liquid chromatography (LC) is increasingly used in biological and clinical studies for precise and reproducible quantification of peptides and proteins in complex sample matrices. Robust LC-SID-MRM-MS-based assays that can be replicated across laboratories and ultimately in clinical laboratory settings require standardized protocols to demonstrate that the analysis platforms are performing adequately. We developed a system suitability protocol (SSP), which employs a predigested mixture of six proteins, to facilitate performance evaluation of LC-SID-MRM-MS instrument platforms, configured with nanoflow-LC systems interfaced to triple quadrupole mass spectrometers. The SSP was designed for use with low multiplex analyses as well as high multiplex approaches when software-driven scheduling of data acquisition is required. Performance was assessed by monitoring of a range of chromatographic and mass spectrometric metrics including peak width, chromatographic resolution, peak capacity, and the variability in peak area and analyte retention time (RT) stability. The SSP, which was evaluated in 11 laboratories on a total of 15 different instruments, enabled early diagnoses of LC and MS anomalies that indicated suboptimal LC-MRM-MS performance. The observed range in variation of each of the metrics scrutinized serves to define the criteria for optimized LC-SID-MRM-MS platforms for routine use, with pass/fail criteria for system suitability performance measures defined as peak area coefficient of variation <0.15, peak width coefficient of variation <0.15, standard deviation of RT <0.15 min (9 s), and the RT drift <0.5min (30 s). The deleterious effect of a marginally performing LC-SID-MRM-MS system on the limit of quantification (LOQ) in targeted quantitative assays illustrates the use and need for a SSP to establish robust and reliable system performance. Use of a SSP helps to ensure that analyte quantification measurements can be replicated with good precision within and across multiple laboratories and should facilitate more widespread use of MRM-MS technology by the basic biomedical and clinical laboratory research communities. PMID:23689285

21 CFR 862.2150 - Continuous flow sequential multiple chemistry analyzer for clinical use.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Continuous flow sequential multiple chemistry..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Laboratory Instruments § 862.2150 Continuous flow sequential multiple chemistry...

21 CFR 862.2150 - Continuous flow sequential multiple chemistry analyzer for clinical use.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Continuous flow sequential multiple chemistry..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Laboratory Instruments § 862.2150 Continuous flow sequential multiple chemistry...

21 CFR 862.2150 - Continuous flow sequential multiple chemistry analyzer for clinical use.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Continuous flow sequential multiple chemistry..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Laboratory Instruments § 862.2150 Continuous flow sequential multiple chemistry...

21 CFR 862.2150 - Continuous flow sequential multiple chemistry analyzer for clinical use.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Continuous flow sequential multiple chemistry..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Laboratory Instruments § 862.2150 Continuous flow sequential multiple chemistry...

21 CFR 862.2150 - Continuous flow sequential multiple chemistry analyzer for clinical use.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Continuous flow sequential multiple chemistry..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Laboratory Instruments § 862.2150 Continuous flow sequential multiple chemistry...

Comparing Teacher and Administrator Perspectives on Multiple Dimensions of Teacher Professionalism

ERIC Educational Resources Information Center

Tichenor, Mercedes; Tichenor, John

2009-01-01

In this paper, we compare teacher and administrator perspectives on multiple dimensions of teacher professionalism. An instrument with a total of 51 professional behaviors and characteristics that operationalize the multiple dimensions of professionalism was developed. Survey participants, including 216 teachers and 89 administrators, were asked…

Measuring Approaches to Learning in Preschoolers: Validating the Structure of an Instrument for Teachers and Parents

ERIC Educational Resources Information Center

Barbu, Otilia C.; Marx, Ronald W.; Yaden, David B., Jr.; Levine-Donnerstein, Deborah

2016-01-01

This study examined a 13-item instrument measuring approaches to learning (AtL) as a component of school readiness in the context of early childhood socio-emotional development. Few instruments, limited to preschool teacher ratings, measure AtL among kindergarteners with short easy-to-use questionnaires. We investigated psychometric properties of…

Implementation of STEAM Education to Improve Mastery Concept

NASA Astrophysics Data System (ADS)

Liliawati, W.; Rusnayati, H.; Purwanto; Aristantia, G.

2018-01-01

Science Technology Engineering, Art, Mathematics (STEAM) is an integration of art into Science Technology Engineering, Mathematics (STEM). Connecting art to science makes learning more effective and innovative. This study aims to determine the increase in mastery of the concept of high school students after the application of STEAM education in learning with the theme of Water and Us. The research method used is one group Pretest-posttest design with students of class VII (n = 37) junior high school. The instrument used in the form of question of mastery of concepts in the form of multiple choices amounted to 20 questions and observation sheet of learning implementation. The results of the study show that there is an increase in conceptualization on the theme of Water and Us which is categorized as medium (=0, 46) after the application of the STEAM approach. The conclusion obtained that by applying STEAM approach in learning can improve the mastery of concept

Translating cognitive neuroscience to the driver’s operational environment: a neuroergonomics approach

PubMed Central

Lees, Monica N.; Cosman, Joshua D.; Lee, John D.; Rizzo, Matthew; Fricke, Nicola

2012-01-01

Neuroergonomics provides a multidisciplinary translational approach that merges elements of neuroscience, human factors, cognitive psychology, and ergonomics to study brain structure and function in everyday environments. Driving safety, particularly that of older drivers with cognitive impairments, is a fruitful application domain for neuroergonomics. Driving makes demands on multiple cognitive processes that are often studied in isolation and so presents a useful challenge in generalizing findings from controlled laboratory tasks to predict safety outcomes. Neurology and the cognitive sciences help explain the mechanisms of cognitive breakdowns that undermine driving safety. Ergonomics complements this explanation with the tools for systematically exploring the various layers of complexity that define the activity of driving. A variety of tools, such as part task simulators, driving simulators, and instrumented vehicles provide a window into cognition in the natural settings needed to assess the generalizability of laboratory findings and can provide an array of potential interventions to increase safety. PMID:21291157

Advances in the assessment and prediction of interpersonal violence.

PubMed

Mills, Jeremy F

2005-02-01

This article underscores the weakness of clinical judgment as a mechanism for prediction with examples from other areas in the psychological literature. Clinical judgment has as its Achilles'heel the reliance on a person to incorporate multiple pieces of information while overcoming human judgment errors--a feat insurmountable thus far. The actuarial approach to risk assessment has overcome many of the weaknesses of clinical judgment and has been shown to be a much superior method. Nonetheless, the static/historical nature of the risk factors associated with most actuarial approaches is limiting. Advances in risk prediction will be found in part in the development of dynamic actuarial instruments that will measure both static/historical and changeable risk factors. The dynamic risk factors can be reevaluated on an ongoing basis, and it is proposed that the level of change in dynamic factors necessary to represent a significant change in overall risk will be an interactive function with static risk factors.

Deriving Atmospheric Properties and Escape Rates from MAVEN's Imaging UV Spectrograph (IUVS)

NASA Astrophysics Data System (ADS)

Schneider, Nicholas M.; IUVS Science Team

2013-10-01

MAVEN (Mars Volatile and Atmosphere EvolutioN) is a Mars Scout mission being readied for launch in November 2013. The key hardware and management partners are University of Colorado, Goddard Space Flight Center, University of California at Berkeley, Lockheed Martin, and the Jet Propulsion Laboratory. MAVEN carries a powerful suite of fields and particles instruments and a sophisticated remote sensing instrument, the Imaging UltraViolet Spectrograph (IUVS). This presentation begins by describing IUVS' science goals, instrument design, operational approach and data analysis strategy. IUVS supports the top-level MAVEN science goals: measure the present state of the atmosphere, observe its response to varying solar stimuli, and use the information to estimate loss from Mars' atmosphere over time. The instrument operates at low spectral resolution spanning the FUV and MUV ranges in separate channels, and at high resolution around the hydrogen Lyman alpha line to measure the D/H ratio in the upper atmosphere. MAVEN carries the instrument on an Articulated Payload Platform which orients the instrument for optimal observations during four segments of its 4.5 hr elliptical orbit. During periapse passage, IUVS uses a scan mirror to obtain vertical profiles of emissions from the atmosphere and ionosphere. Around apoapse, the instrument builds up low-resolution images of the atmosphere at multiple wavelengths. In between, the instrument measures emissions from oxygen, hydrogen and deuterium in the corona. IUVS also undertakes day-long stellar occultation campaigns at 2 month intervals, to measure the state of the atmosphere at altitudes below the airglow layer and in situ sampling. All data will be pipeline-processed from line brightnesses to column abundances, local densities and global 3-D maps. The focus of the presentation is development of these automatic processing algorithms and the data products they will provide to the Mars community through the PDS Atmospheres Node. The combined results from all instruments on ion and neutral escape will bear on the central question of the history of Mars' atmosphere and climate history. This work has been supported by NASA's MAVEN mission.

The effects of using a human patient simulator compared to a CD-ROM in teaching critical thinking and performance.

PubMed

Johnson, Don; Johnson, Sabine

2014-01-01

Military healthcare personnel, including nurse anesthetists, must have the knowledge and skills to care for the extensive, severe injuries incurred on the battlefield. No studies have compared the 2 teaching strategies of using the human patient simulator (HPS) and a CD-ROM in caring for combat injuries relative to critical thinking and performance using nurse anesthesia participants. A prospective, pretest-posttest experimental, mixed design (within and between) was used to determine if there were statistically significant differences in HPS and CD-ROM educational strategies relative to caring for patients who have trauma. Two instruments were used: critical thinking, which consisted of multiple-choice questions; and a combat performance instrument that measured ability to care for patients. A repeated analysis of variance and a least significant difference post-hoc test were used to analyze the data. The HPS group performed better than the CD-ROM and control groups relative to performance (P=.000) but not on critical thinking (P=.239). There was no difference between the CD-ROM and control group (P=.171) on the combat performance instrument. In this study, the HPS method of instruction was a more effective method of teaching than the CD-ROM approach.

A Cloud Hydrology and Albedo Synthesis Mission (CHASM)

NASA Technical Reports Server (NTRS)

Davies, Roger

2004-01-01

This slide presentation reviews the Cloud Hydrology and Albedo Synthesis Mission (CHASM). The interaction of clouds with radiation and the hydrological cycle represents a huge uncertainty in our understanding of climate science and the modeling of climate system feedbacks. Despite the recognized need for a unified treatment of cloud processes, the present global average values of remotely sensed cloud liquid water and theoretically accepted values used for cloud physics and precipitation modeling differ by an order of magnitude. This is due in part to sampling and saturation effects, as well as to threedimensional cloud structure effects. In recent work with the Multiangle Imaging SpectroRadiometer (MISR) on Terra, we have gained new insights as to how the remote sensing approach could be significantly improved using a new instrument that combines passive optical (visible and near infrared) and microwave measurements, both as pushbroom scanners with multiple viewing angles, to the degree that measurements of liquid water path over deep convective clouds over land also become possible. This instrument would also have the ability of measuring height-resolved cloud-tracked winds using a hyper stereo retrieval technique. Deployment into a precessing low earth orbit would be optimal for measuring diurnal cloud activity. We have explored an instrument design concept for this that looks promising if we can establish partnerships that provide launch and bus capabilities.

Mass analysis addition to the Differential Ion Flux Probe (DIFP) study

NASA Technical Reports Server (NTRS)

Wright, K. H., Jr.; Jolley, Richard

1994-01-01

The objective of this study is to develop a technique to measure the characteristics of space plasmas under highly disturbed conditions; e.g., non-Maxwellian plasmas with strong drifting populations and plasmas contaminated by spacecraft outgassing. The approach, conducted in conjunction with current MSFC activities, is to extend the capabilities of the Differential Ion Flux Probe (DIFP) to include a high throughput mass measurement that does not require either high voltage or contamination sensitive devices such as channeltron electron multipliers or microchannel plates. This will significantly reduce the complexity and expense of instrument fabrication, testing, and integration of flight hardware compared to classical mass analyzers. The feasibility of the enhanced DIFP has been verified by using breadboard test models in a controlled plasma environment. The ability to manipulate particles through the instrument regardless of incident angle, energy, or ionic component has been amply demonstrated. The energy analysis mode is differential and leads directly to a time-of-flight mass measurement. With the new design, the DIFP will separate multiple ion streams and analyze each stream independently for ion flux intensity, velocity (including direction of motion), mass, and temperature (or energy distribution). In particular, such an instrument will be invaluable on follow-on electrodynamic TSS missions and, possibly, for environmental monitoring on the space station.

78 FR 76054 - Establishment of Class E Airspace; Chatom, AL

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-16

... Instrument Approach Procedures at Roy Wilcox Airport. This action enhances the safety and management of... new RNAV (GPS) Standard Instrument Approach Procedures developed at the airport. The geographic...

76 FR 56967 - Amendment of Class E Airspace; Glendive, MT

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-15

... Positioning System (GPS) standard instrument approach procedures. This improves the safety and management of... Airport, to accommodate IFR aircraft executing RNAV (GPS) standard instrument approach procedures at the...

77 FR 38476 - Establishment of Class E Airspace; Eureka, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-28

... (GPS) standard instrument approach procedures at Eureka Airport, Eureka, NV. This improves the safety... Eureka Airport, to accommodate IFR aircraft executing a new RNAV (GPS) standard instrument approach...

Visual tracking of da Vinci instruments for laparoscopic surgery

NASA Astrophysics Data System (ADS)

Speidel, S.; Kuhn, E.; Bodenstedt, S.; Röhl, S.; Kenngott, H.; Müller-Stich, B.; Dillmann, R.

2014-03-01

Intraoperative tracking of laparoscopic instruments is a prerequisite to realize further assistance functions. Since endoscopic images are always available, this sensor input can be used to localize the instruments without special devices or robot kinematics. In this paper, we present an image-based markerless 3D tracking of different da Vinci instruments in near real-time without an explicit model. The method is based on different visual cues to segment the instrument tip, calculates a tip point and uses a multiple object particle filter for tracking. The accuracy and robustness is evaluated with in vivo data.

The Health Action Process Approach as a motivational model for physical activity self-management for people with multiple sclerosis: a path analysis.

PubMed

Chiu, Chung-Yi; Lynch, Ruth T; Chan, Fong; Berven, Norman L

2011-08-01

To evaluate the Health Action Process Approach (HAPA) as a motivational model for physical activity self-management for people with multiple sclerosis (MS). Quantitative descriptive research design using path analysis. One hundred ninety-five individuals with MS were recruited from the National Multiple Sclerosis Society and a neurology clinic at a university teaching hospital in the Midwest. Outcome was measured by the Physical Activity Stages of Change Instrument, along with measures for nine predictors (severity, action self-efficacy, outcome expectancy, risk perception, perceived barriers, intention, maintenance self-efficacy, action and coping planning, and recovery self-efficacy). The respecified HAPA physical activity model fit the data relatively well (goodness-of-fit index = .92, normed fit index = .91, and comparative fit index = .93) explaining 38% of the variance in physical activity. Recovery self-efficacy, action and coping planning, and perceived barriers directly contributed to the prediction of physical activity. Outcome expectancy significantly influenced intention and the relationship between intention and physical activity is mediated by action and coping planning. Action self-efficacy, maintenance self-efficacy, and recovery self-efficacy directly or indirectly affected physical activity. Severity of MS and action self-efficacy had an inverse relationship with perceived barriers and perceived barriers influenced physical activity. Empirical support was found for the proposed HAPA model of physical activity for people with MS. The HAPA model appears to provide useful information for clinical rehabilitation and health promotion interventions.

Sparse reconstruction localization of multiple acoustic emissions in large diameter pipelines

NASA Astrophysics Data System (ADS)

Dubuc, Brennan; Ebrahimkhanlou, Arvin; Salamone, Salvatore

2017-04-01

A sparse reconstruction localization method is proposed, which is capable of localizing multiple acoustic emission events occurring closely in time. The events may be due to a number of sources, such as the growth of corrosion patches or cracks. Such acoustic emissions may yield localization failure if a triangulation method is used. The proposed method is implemented both theoretically and experimentally on large diameter thin-walled pipes. Experimental examples are presented, which demonstrate the failure of a triangulation method when multiple sources are present in this structure, while highlighting the capabilities of the proposed method. The examples are generated from experimental data of simulated acoustic emission events. The data corresponds to helical guided ultrasonic waves generated in a 3 m long large diameter pipe by pencil lead breaks on its outer surface. Acoustic emission waveforms are recorded by six sparsely distributed low-profile piezoelectric transducers instrumented on the outer surface of the pipe. The same array of transducers is used for both the proposed and the triangulation method. It is demonstrated that the proposed method is able to localize multiple events occurring closely in time. Furthermore, the matching pursuit algorithm and the basis pursuit densoising approach are each evaluated as potential numerical tools in the proposed sparse reconstruction method.

Measuring spent fuel assembly multiplication in borated water with a passive neutron albedo reactivity instrument

NASA Astrophysics Data System (ADS)

Tobin, Stephen J.; Peura, Pauli; Bélanger-Champagne, Camille; Moring, Mikael; Dendooven, Peter; Honkamaa, Tapani

2018-07-01

The performance of a passive neutron albedo reactivity (PNAR) instrument to measure neutron multiplication of spent nuclear fuel in borated water is investigated as part of an integrated non-destructive assay safeguards system. To measure the PNAR Ratio, which is proportional to the neutron multiplication, the total neutron count rate is measured in high- and low-multiplying environments by the PNAR instrument. The integrated system also contains a load cell and a passive gamma emission tomograph, and as such meets all the recommendations of the IAEA's recent ASTOR Experts Group report. A virtual spent fuel library for VVER-440 fuel was used in conjunction with MCNP simulations of the PNAR instrument to estimate the measurement uncertainties from (1) variation in the water boron content, (2) assembly positioning in the detector and (3) counting statistics. The estimated aggregate measurement uncertainty on the PNAR Ratio measurement is 0.008, to put this uncertainty in context, the difference in the PNAR Ratio between a fully irradiated assembly and this same assembly when fissile isotopes only absorb neutrons, but do not emit neutrons, is 0.106, a 13-sigma effect. The 1-sigma variation of 0.008 in the PNAR Ratio is estimated to correspond to a 3.2 GWd/tU change in assembly burnup.

Achieving design reuse: a case study

NASA Astrophysics Data System (ADS)

Young, Peter J.; Nielsen, Jon J.; Roberts, William H.; Wilson, Greg M.

2008-08-01

The RSAA CICADA data acquisition and control software package uses an object-oriented approach to model astronomical instrumentation and a layered architecture for implementation. Emphasis has been placed on building reusable C++ class libraries and on the use of attribute/value tables for dynamic configuration. This paper details how the approach has been successfully used in the construction of the instrument control software for the Gemini NIFS and GSAOI instruments. The software is again being used for the new RSAA SkyMapper and WiFeS instruments.

Laser Amplifier Development for the Remote Sensing of CO2 from Space

NASA Technical Reports Server (NTRS)

Yu, Anthony W.; Abshire, James B.; Storm, Mark; Betin, Alexander

2015-01-01

Accurate global measurements of tropospheric CO2 mixing ratios are needed to study CO2 emissions and CO2 exchange with the land and oceans. NASA Goddard Space Flight Center (GSFC) is developing a pulsed lidar approach for an integrated path differential absorption (IPDA) lidar to allow global measurements of atmospheric CO2 column densities from space. Our group has developed, and successfully flown, an airborne pulsed lidar instrument that uses two tunable pulsed laser transmitters allowing simultaneous measurement of a single CO2 absorption line in the 1570 nm band, absorption of an O2 line pair in the oxygen A-band (765 nm), range, and atmospheric backscatter profiles in the same path. Both lasers are pulsed at 10 kHz, and the two absorption line regions are sampled at typically a 300 Hz rate. A space-based version of this lidar must have a much larger lidar power-area product due to the approximately x40 longer range and faster along track velocity compared to airborne instrument. Initial link budget analysis indicated that for a 400 km orbit, a 1.5 m diameter telescope and a 10 second integration time, a approximately 2 mJ laser energy is required to attain the precision needed for each measurement. To meet this energy requirement, we have pursued parallel power scaling efforts to enable space-based lidar measurement of CO2 concentrations. These included a multiple aperture approach consists of multi-element large mode area fiber amplifiers and a single-aperture approach consists of a multi-pass Er:Yb:Phosphate glass based planar waveguide amplifier (PWA). In this paper we will present our laser amplifier design approaches and preliminary results.

High Energy, Narrow Linewidth 1572nm Eryb-Fiber Based MOPA for a Multi-Aperture CO2 Trace-Gas Laser Space Transmitter

NASA Technical Reports Server (NTRS)

Engin, Doruk; Mathason, Brian; Stephen, Mark; Yu, Anthony; Cao, He; Fouron, Jean-Luc; Storm, Mark

2016-01-01

Accurate global measurements of tropospheric CO2 mixing ratios are needed to study CO2 emissions and CO2 exchange with the land and oceans. NASA Goddard Space Flight Center (GSFC) is developing a pulsed lidar approach for an integrated path differential absorption (IPDA) lidar to allow global measurements of atmospheric CO2 column densities from space. Our group has developed, and successfully flown, an airborne pulsed lidar instrument that uses two tunable pulsed laser transmitters allowing simultaneous measurement of a single CO2 absorption line in the 1570 nm band, absorption of an O2 line pair in the oxygen A-band (765 nm), range, and atmospheric backscatter profiles in the same path. Both lasers are pulsed at 10 kHz, and the two absorption line regions are sampled at typically a 300 Hz rate. A space-based version of this lidar must have a much larger lidar power-area product due to the x40 longer range and faster along track velocity compared to airborne instrument. Initial link budget analysis indicated that for a 400 km orbit, a 1.5 m diameter telescope and a 10 second integration time, a 2 mJ laser energy is required to attain the precision needed for each measurement. To meet this energy requirement, we have pursued parallel power scaling efforts to enable space-based lidar measurement of CO2 concentrations. These included a multiple aperture approach consists of multi-element large mode area fiber amplifiers and a single-aperture approach consists of a multi-pass Er:Yb:Phosphate glass based planar waveguide amplifier (PWA). In this paper we will present our laser amplifier design approaches and preliminary results.

Accounting for standard errors of vision-specific latent trait in regression models.

PubMed

Wong, Wan Ling; Li, Xiang; Li, Jialiang; Wong, Tien Yin; Cheng, Ching-Yu; Lamoureux, Ecosse L

2014-07-11

To demonstrate the effectiveness of Hierarchical Bayesian (HB) approach in a modeling framework for association effects that accounts for SEs of vision-specific latent traits assessed using Rasch analysis. A systematic literature review was conducted in four major ophthalmic journals to evaluate Rasch analysis performed on vision-specific instruments. The HB approach was used to synthesize the Rasch model and multiple linear regression model for the assessment of the association effects related to vision-specific latent traits. The effectiveness of this novel HB one-stage "joint-analysis" approach allows all model parameters to be estimated simultaneously and was compared with the frequently used two-stage "separate-analysis" approach in our simulation study (Rasch analysis followed by traditional statistical analyses without adjustment for SE of latent trait). Sixty-six reviewed articles performed evaluation and validation of vision-specific instruments using Rasch analysis, and 86.4% (n = 57) performed further statistical analyses on the Rasch-scaled data using traditional statistical methods; none took into consideration SEs of the estimated Rasch-scaled scores. The two models on real data differed for effect size estimations and the identification of "independent risk factors." Simulation results showed that our proposed HB one-stage "joint-analysis" approach produces greater accuracy (average of 5-fold decrease in bias) with comparable power and precision in estimation of associations when compared with the frequently used two-stage "separate-analysis" procedure despite accounting for greater uncertainty due to the latent trait. Patient-reported data, using Rasch analysis techniques, do not take into account the SE of latent trait in association analyses. The HB one-stage "joint-analysis" is a better approach, producing accurate effect size estimations and information about the independent association of exposure variables with vision-specific latent traits. Copyright 2014 The Association for Research in Vision and Ophthalmology, Inc.

76 FR 73504 - Amendment of Class E Airspace; Alice, TX

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

..., area. Cancellation of all standard instrument approach procedures at Old Hoppe Place Airport, Agua... Old Hoppe Place Airport, Agua Dulce, TX, due to the cancellation of all standard instrument approach...

75 FR 76650 - Proposed Modification of Class E Airspace; Bryce Canyon, UT

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-09

...) Global Positioning System (GPS) Standard Instrument Approach Procedures at Bryce Canyon Airport. The FAA.... Controlled airspace is necessary to accommodate aircraft using the RNAV (GPS) Standard Instrument Approach...

Thin Film Physical Sensor Instrumentation Research and Development at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Wrbanek, John D.; Fralick, Gustave C.

2006-01-01

A range of thin film sensor technology has been demonstrated enabling measurement of multiple parameters either individually or in sensor arrays including temperature, strain, heat flux, and flow. Multiple techniques exist for refractory thin film fabrication, fabrication and integration on complex surfaces and multilayered thin film insulation. Leveraging expertise in thin films and high temperature materials, investigations for the applications of thin film ceramic sensors has begun. The current challenges of instrumentation technology are to further develop systems packaging and component testing of specialized sensors, further develop instrumentation techniques on complex surfaces, improve sensor durability, and to address needs for extreme temperature applications. The technology research and development ongoing at NASA Glenn for applications to future launch vehicles, space vehicles, and ground systems is outlined.

Relationship of students' conceptual representations and problem-solving abilities in acid-base chemistry

NASA Astrophysics Data System (ADS)

Powers, Angela R.

2000-10-01

This study explored the relationship between secondary chemistry students' conceptual representations of acid-base chemistry, as shown in student-constructed concept maps, and their ability to solve acid-base problems, represented by their score on an 18-item paper and pencil test, the Acid-Base Concept Assessment (ABCA). The ABCA, consisting of both multiple-choice and short-answer items, was originally designed using a question-type by subtopic matrix, validated by a panel of experts, and refined through pilot studies and factor analysis to create the final instrument. The concept map task included a short introduction to concept mapping, a prototype concept map, a practice concept-mapping activity, and the instructions for the acid-base concept map task. The instruments were administered to chemistry students at two high schools; 108 subjects completed both instruments for this study. Factor analysis of ABCA results indicated that the test was unifactorial for these students, despite the intention to create an instrument with multiple "question-type" scales. Concept maps were scored both holistically and by counting valid concepts. The two approaches were highly correlated (r = 0.75). The correlation between ABCA score and concept-map score was 0.29 for holistically-scored concept maps and 0.33 for counted-concept maps. Although both correlations were significant, they accounted for only 8.8 and 10.2% of variance in ABCA scores, respectively. However, when the reliability of the instruments used is considered, more than 20% of the variance in ABCA scores may be explained by concept map scores. MANOVAs for ABCA and concept map scores by instructor, student gender, and year in school showed significant differences for both holistic and counted concept-map scores. Discriminant analysis revealed that the source of these differences was the instruction variable. Significant differences between classes receiving different instruction were found in the frequency of concepts listed by students for 9 of 10 concepts evaluated. Mean ABCA scores did not differ significantly between the two instruction groups. The results of this study failed to provide evidence of conceptual distinctions among different "types" of problem-solving items. The results suggested that several factors influence success in chemistry problem solving, including concept knowledge and organization. Further research into the nature of chemistry problems and problem solving is recommended.

Reconciling differences in stratospheric ozone composites

NASA Astrophysics Data System (ADS)

Ball, William T.; Alsing, Justin; Mortlock, Daniel J.; Rozanov, Eugene V.; Tummon, Fiona; Haigh, Joanna D.

2017-10-01

Observations of stratospheric ozone from multiple instruments now span three decades; combining these into composite datasets allows long-term ozone trends to be estimated. Recently, several ozone composites have been published, but trends disagree by latitude and altitude, even between composites built upon the same instrument data. We confirm that the main causes of differences in decadal trend estimates lie in (i) steps in the composite time series when the instrument source data changes and (ii) artificial sub-decadal trends in the underlying instrument data. These artefacts introduce features that can alias with regressors in multiple linear regression (MLR) analysis; both can lead to inaccurate trend estimates. Here, we aim to remove these artefacts using Bayesian methods to infer the underlying ozone time series from a set of composites by building a joint-likelihood function using a Gaussian-mixture density to model outliers introduced by data artefacts, together with a data-driven prior on ozone variability that incorporates knowledge of problems during instrument operation. We apply this Bayesian self-calibration approach to stratospheric ozone in 10° bands from 60° S to 60° N and from 46 to 1 hPa (˜ 21-48 km) for 1985-2012. There are two main outcomes: (i) we independently identify and confirm many of the data problems previously identified, but which remain unaccounted for in existing composites; (ii) we construct an ozone composite, with uncertainties, that is free from most of these problems - we call this the BAyeSian Integrated and Consolidated (BASIC) composite. To analyse the new BASIC composite, we use dynamical linear modelling (DLM), which provides a more robust estimate of long-term changes through Bayesian inference than MLR. BASIC and DLM, together, provide a step forward in improving estimates of decadal trends. Our results indicate a significant recovery of ozone since 1998 in the upper stratosphere, of both northern and southern midlatitudes, in all four composites analysed, and particularly in the BASIC composite. The BASIC results also show no hemispheric difference in the recovery at midlatitudes, in contrast to an apparent feature that is present, but not consistent, in the four composites. Our overall conclusion is that it is possible to effectively combine different ozone composites and account for artefacts and drifts, and that this leads to a clear and significant result that upper stratospheric ozone levels have increased since 1998, following an earlier decline.

Chemical Synthesis Coxiella Burnetti Lipopolysaccharides: Structural Studies of Coxiella Burnetti Lipopolysaccharides.

DTIC Science & Technology

1987-11-30

currently evaluating two instrumental techniques which seem highly appropriate to this LPS project, supercritical fluid chromatography (SFC) and...NEW INSTRUMENTAL TECHNIQUES AND METHODS OF APPROACH 1. Supercritical Fluid Chromatography (SFC) ............... 6. 2. SFC and Mass Spectrometry...details are discussed below in the appropriate sections. B. NEW INSTRUMENTAL TECHNIQUES AND METHODS OF APPROACH 1. Supercritical Fluid Chromatography (SFC

Designing Spatial Visualisation Tasks for Middle School Students with a 3D Modelling Software: An Instrumental Approach

ERIC Educational Resources Information Center

Turgut, Melih; Uygan, Candas

2015-01-01

In this work, certain task designs to enhance middle school students' spatial visualisation ability, in the context of an instrumental approach, have been developed. 3D modelling software, SketchUp®, was used. In the design process, software tools were focused on and, thereafter, the aim was to interpret the instrumental genesis and spatial…

Twenty-five-year atraumatic restorative treatment (ART) approach: a comprehensive overview.

PubMed

Frencken, Jo E; Leal, Soraya Coelho; Navarro, Maria Fidela

2012-10-01

The atraumatic restorative treatment (ART) approach was born 25 years ago in Tanzania. It has evolved into an essential caries management concept for improving quality and access to oral care globally. Meta-analyses and systematic reviews have indicated that the high effectiveness of ART sealants using high-viscosity glass ionomers in carious lesion development prevention is not different from that of resin fissure sealants. ART using high-viscosity glass ionomer can safely be used to restore single-surface cavities both in primary and in permanent posterior teeth, but its quality in restoring multiple surfaces in primary posterior teeth cavities needs to be improved. Insufficient information is available regarding the quality of ART restorations in multiple surfaces in permanent anterior and posterior teeth. There appears to be no difference in the survival of single-surface high-viscosity glass-ionomer ART restorations and amalgam restorations. The use of ART results in smaller cavities and in high acceptance of preventive and restorative care by children. Because local anaesthesia is seldom needed and only hand instruments are used, ART is considered to be a promising approach for treating children suffering from early childhood caries. ART has been implemented in the public oral health services of a number of countries, and clearly, proper implementation requires the availability of sufficient stocks of good high-viscosity glass ionomers and sets of ART instruments right from the start. Textbooks including chapters on ART are available, and the concept is being included in graduate courses at dental schools in a number of countries. Recent development and testing of e-learning modules for distance learning has increasingly facilitated the distribution of ART information amongst professionals, thus enabling more people to benefit from ART. However, this development and further research require adequate funding, which is not always easily obtainable. The next major challenge is the continuation of care to the frail elderly, in which ART may play a part. ART, as part of the Basic Package of Oral Care, is an important cornerstone for the development of global oral health and alleviating inequality in oral care.

Assessment of factors that predict physical activity among Oklahoma clergy: a theory of planned behavior approach.

PubMed

Gwin, Shannon; Taylor, E Laurette; Branscum, Paul; Hofford, Craig

2013-01-01

The purpose of this study was to examine predictors of physical activity among clergy members in Oklahoma, using the theory of planned behavior. A 51-item valid and reliable instrument, measuring theory of planned behavior constructs and physical activity, was developed and administered to 141 clergy members. Results indicated that the majority of those surveyed were white (93%), college educated (97%), and overweight or obese (84%). Stepwise multiple regression analysis found that intentions accounted for 13.8% of the variance of physical activity whereas attitudes, subjective norms, and perceived behavioral control accounted for 54.8% of the variance of intention. Implications for intervention development are discussed.

Intraoral fiber optic-based diagnostic for periodontal disease

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, P W; Gutierrez, D M; Everett, M J

2000-01-21

The purpose of this initial study was to begin development of a new, objective diagnostic instrument that will allow simultaneous quantitation of multiple proteases within a single periodontal pocket using a chemical fiber optic sensor. This approach could potentially be adapted to use specific antibodies and chemiluminescence to detect and quantitate virtually any compound and compare concentrations of different compounds within the same periodontal pocket. The device could also be used to assay secretions in salivary ducts or from a variety of wounds. The applicability is, therefore, not solely limited to dentistry and the device would be important both formore » clinical diagnostics and as a research tool.« less

Development of student performance assessment based on scientific approach for a basic physics practicum in simple harmonic motion materials

NASA Astrophysics Data System (ADS)

Serevina, V.; Muliyati, D.

2018-05-01

This research aims to develop students’ performance assessment instrument based on scientific approach is valid and reliable in assessing the performance of students on basic physics lab of Simple Harmonic Motion (SHM). This study uses the ADDIE consisting of stages: Analyze, Design, Development, Implementation, and Evaluation. The student performance assessment developed can be used to measure students’ skills in observing, asking, conducting experiments, associating and communicate experimental results that are the ‘5M’ stages in a scientific approach. Each grain of assessment in the instrument is validated by the instrument expert and the evaluation with the result of all points of assessment shall be eligible to be used with a 100% eligibility percentage. The instrument is then tested for the quality of construction, material, and language by panel (lecturer) with the result: 85% or very good instrument construction aspect, material aspect 87.5% or very good, and language aspect 83% or very good. For small group trial obtained instrument reliability level of 0.878 or is in the high category, where r-table is 0.707. For large group trial obtained instrument reliability level of 0.889 or is in the high category, where r-table is 0.320. Instruments declared valid and reliable for 5% significance level. Based on the result of this research, it can be concluded that the student performance appraisal instrument based on the developed scientific approach is declared valid and reliable to be used in assessing student skill in SHM experimental activity.

Effect of Surgical Approach on Pulmonary Function in Adolescent Idiopathic Scoliosis Patients: A Systemic Review and Meta-analysis.

PubMed

Lee, Andy C H; Feger, Mark A; Singla, Anuj; Abel, Mark F

2016-11-15

Systemic review and meta-analysis. To analyze the effect of spinal fusion and instrumentation for adolescent idiopathic scoliosis (AIS) on absolute pulmonary function test (PFTs). Pulmonary function is correlated with severity of deformity in AIS patients and studies that have analyzed the effect of spinal fusion and instrumentation on PFTs for AIS have reported inconsistent results. There is a need to analyze the effect of spinal fusion on PFTs with stratification by surgical approach. Our analysis included 22 studies. Cohen's d effect sizes were calculated for absolute PFT outcome measures with 95% confidence intervals (CI). Meta-analyses were performed at each postoperative time frame for six homogeneous surgical approaches: (i) combined anterior release and posterior fusion with instrumentation; (ii) combined video assisted anterior release and posterior fusion with instrumentation without thoracoplasty; (iii) posterior fusion with instrumentation without thoracoplasty; (iv) anterior fusion with instrumentation and without thoracoplasty; (v) video assisted anterior fusion with instrumentation without thoracoplasty; and (vi) any scoliosis surgery with additional thoracoplasty. Anterior spinal fusion with instrumentation, any scoliosis surgery with concomitant thoracoplasty, or video-assisted anterior fusion with instrumentation for AIS had similar absolute PFTs at their 2 year postoperative follow up compared with their preoperative PFTs (effect sizes ranging from -0.2-0.2 with all CI crossing "0"). Posterior spinal fusion with instrumentation (with or without an anterior release) demonstrated small to moderate increases in PFTs 2 years postoperatively (effect sizes ranging from 0.35-0.65 with all CI not crossing "0"). Anterior fusion with instrumentation, regardless of the approach, and any scoliosis surgery with concomitant thoracoplasty do not lead to significant change in pulmonary functions 2 year after surgery. Posterior spinal fusion with instrumentation (with or without an anterior release) resulted in small to moderate increases in PFTs. N/A.

Reliability, Validity and Utility of a Multiple Intelligences Assessment for Career Planning.

ERIC Educational Resources Information Center

Shearer, C. Branton

"The Multiple Intelligences Developmental Assessment Scales" (MIDAS) is a self- (or other-) completed instrument which is based upon the theory of multiple intelligences. The validity, reliability, and utility data regarding the MIDAS are reported here. The measure consists of 7 main scales and 24 subscales which summarize a person's intellectual…

Accurate, Sensitive, and Precise Multiplexed Proteomics Using the Complement Reporter Ion Cluster

DOE PAGES

Sonnett, Matthew; Yeung, Eyan; Wuhr, Martin

2018-03-09

We present that quantitative analysis of proteomes across multiple time points, organelles, and perturbations is essential for understanding both fundamental biology and disease states. The development of isobaric tags (e.g. TMT) have enabled the simultaneous measurement of peptide abundances across several different conditions. These multiplexed approaches are promising in principle because of advantages in throughput and measurement quality. However, in practice existing multiplexing approaches suffer from key limitations. In its simple implementation (TMT-MS2), measurements are distorted by chemical noise leading to poor measurement accuracy. The current state-of-the-art (TMT-MS3) addresses this, but requires specialized quadrupole-iontrap-Orbitrap instrumentation. The complement reporter ion approachmore » (TMTc) produces high accuracy measurements and is compatible with many more instruments, like quadrupole-Orbitraps. However, the required deconvolution of the TMTc cluster leads to poor measurement precision. Here, we introduce TMTc+, which adds the modeling of the MS2-isolation step into the deconvolution algorithm. The resulting measurements are comparable in precision to TMT-MS3/MS2. The improved duty cycle, and lower filtering requirements make TMTc+ more sensitive than TMT-MS3 and comparable with TMT-MS2. At the same time, unlike TMT-MS2, TMTc+ is exquisitely able to distinguish signal from chemical noise even outperforming TMT-MS3. Lastly, we compare TMTc+ to quantitative label-free proteomics of total HeLa lysate and find that TMTc+ quantifies 7.8k versus 3.9k proteins in a 5-plex sample. At the same time the median coefficient of variation improves from 13% to 4%. Furthermore, TMTc+ advances quantitative proteomics by enabling accurate, sensitive, and precise multiplexed experiments on more commonly used instruments.« less

Accurate, Sensitive, and Precise Multiplexed Proteomics Using the Complement Reporter Ion Cluster

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sonnett, Matthew; Yeung, Eyan; Wuhr, Martin

We present that quantitative analysis of proteomes across multiple time points, organelles, and perturbations is essential for understanding both fundamental biology and disease states. The development of isobaric tags (e.g. TMT) have enabled the simultaneous measurement of peptide abundances across several different conditions. These multiplexed approaches are promising in principle because of advantages in throughput and measurement quality. However, in practice existing multiplexing approaches suffer from key limitations. In its simple implementation (TMT-MS2), measurements are distorted by chemical noise leading to poor measurement accuracy. The current state-of-the-art (TMT-MS3) addresses this, but requires specialized quadrupole-iontrap-Orbitrap instrumentation. The complement reporter ion approachmore » (TMTc) produces high accuracy measurements and is compatible with many more instruments, like quadrupole-Orbitraps. However, the required deconvolution of the TMTc cluster leads to poor measurement precision. Here, we introduce TMTc+, which adds the modeling of the MS2-isolation step into the deconvolution algorithm. The resulting measurements are comparable in precision to TMT-MS3/MS2. The improved duty cycle, and lower filtering requirements make TMTc+ more sensitive than TMT-MS3 and comparable with TMT-MS2. At the same time, unlike TMT-MS2, TMTc+ is exquisitely able to distinguish signal from chemical noise even outperforming TMT-MS3. Lastly, we compare TMTc+ to quantitative label-free proteomics of total HeLa lysate and find that TMTc+ quantifies 7.8k versus 3.9k proteins in a 5-plex sample. At the same time the median coefficient of variation improves from 13% to 4%. Furthermore, TMTc+ advances quantitative proteomics by enabling accurate, sensitive, and precise multiplexed experiments on more commonly used instruments.« less

Web-Enabled Optoelectronic Particle-Fallout Monitor

NASA Technical Reports Server (NTRS)

Lineberger, Lewis P.

2008-01-01

A Web-enabled optoelectronic particle- fallout monitor has been developed as a prototype of future such instruments that (l) would be installed in multiple locations for which assurance of cleanliness is required and (2) could be interrogated and controlled in nearly real time by multiple remote users. Like prior particle-fallout monitors, this instrument provides a measure of particles that accumulate on a surface as an indication of the quantity of airborne particulate contaminants. The design of this instrument reflects requirements to: Reduce the cost and complexity of its optoelectronic sensory subsystem relative to those of prior optoelectronic particle fallout monitors while maintaining or improving capabilities; Use existing network and office computers for distributed display and control; Derive electric power for the instrument from a computer network, a wall outlet, or a battery; Provide for Web-based retrieval and analysis of measurement data and of a file containing such ancillary data as a log of command attempts at remote units; and Use the User Datagram Protocol (UDP) for maximum performance and minimal network overhead.

Pain after root canal treatment with different instruments: A systematic review and meta-analysis.

PubMed

Sun, Chengjun; Sun, Jicheng; Tan, Minmin; Hu, Bo; Gao, Xiang; Song, Jinlin

2018-03-07

The aims of this systematic review were to compare the incidence and intensity of postoperative pain after single-visit root canal treatment using manual, rotary and reciprocating instruments. An extensive literature search in PubMed, EMBASE, Cochrane Library, and Web of Science was performed to identify investigations that evaluated the effects of different instruments on post-endodontic pain. Meta-analyses and additional analyses, including subgroup and sensitivity analyses, were conducted. We included seventeen trials in this study. Pooled results showed that patients treated with rotary instruments experienced a significantly lower incidence of postoperative pain (RR, 0.32, P = 0.0005) and reduced pain intensity than did patients treated with manual instruments. In addition, patients treated with multiple rotary-file systems experienced a significantly lower incidence of postoperative pain than did those treated with reciprocating systems (RR, 0.73; P < 0.0001). The use of rotary instruments contributed to a lower incidence and intensity of postoperative pain than did the use of hand files in patients who received single-visit root canal treatment. In addition, the use of multiple rotary-file systems contributed to a lower incidence of postoperative pain than did the use of reciprocating systems. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Effect of autoclaving on the surfaces of TiN -coated and conventional nickel-titanium rotary instruments.

PubMed

Spagnuolo, G; Ametrano, G; D'Antò, V; Rengo, C; Simeone, M; Riccitiello, F; Amato, M

2012-12-01

To evaluate the effects of repeated autoclave sterilization cycles on surface topography of conventional nickel-titanium ( NiTi ) and titanium nitride ( TiN )-coated rotary instruments. A total of 60 NiTi rotary instruments, 30 ProTaper (Dentsply Maillefer) and 30 TiN -coated AlphaKite (Komet/Gebr. Brasseler), were analysed. Instruments were evaluated in the as-received condition and after 1, 5 and 10 sterilization cycles. After sterilization, the samples were observed using scanning electron microscope (SEM), and surface chemical analysis was performed on each instrument with energy dispersive X-ray spectroscopy (EDS). Moreover, the samples were analysed by atomic force microscopy (AFM), and roughness average (Ra) and the root mean square value (RMS) of the scanned surface profiles were recorded. Data were analysed by means of anova followed by Tukey's test. Scanning electron microscope observations revealed the presence of pitting and deep milling marks in all instruments. EDS analysis confirmed that both types of instruments were composed mainly of nickel and titanium, whilst AlphaKite had additional nitride. After multiple autoclave sterilization cycles, SEM examinations revealed an increase in surface alterations, and EDS values indicated changes in chemical surface composition in all instruments. Ra and RMS values of ProTaper significantly increased after 5 (P = 0.006) and 10 cycles (P = 0.002) with respect to the as-received instruments, whilst AlphaKite showed significant differences compared with the controls after 10 cycles (P = 0.03). Multiple autoclave sterilization cycles modified the surface topography and chemical composition of conventional and TiN -coated NiTi rotary instruments. © 2012 International Endodontic Journal.

[Development of methods and instruments for external quality assurance in inpatient parent-child rehabilitation and prevention].

PubMed

Neuderth, S; Lukasczik, M; Musekamp, G; Gerlich, C; Saupe-Heide, M; Löbmann, R; Vogel, H

2013-02-01

There so far is no standardized program for external quality assurance in inpatient parent-child prevention and rehabilitation in Germany. Therefore, instruments and methods of external quality assurance were developed and evaluated on behalf of the federal-level health insurance institutions. On the level of structure quality, a modular questionnaire for assessing structural features of rehabilitation/prevention centers, basic and allocation criteria as well as a checklist for visitations were developed. Structural data were collected in a nationwide survey of parent-child prevention and rehabilitation centers. Process and outcome quality data were collected in n=38 centers. Process quality was assessed using multiple methods (process-related structural features, case-related routine documentation, and incident-related patient questionnaires). Outcome quality was measured via patient questionnaires (n=1 799 patients). We used a multi-level modelling approach by adjusting relevant confounders on institutional and patient levels. The methods, instruments and analyzing procedures developed for measuring quality on the level of structure, processes and outcomes were adjusted in cooperation with all relevant stakeholders. Results are exemplarily presented for all quality assurance tools. For most of the risk-adjusted outcome parameters, we found no significant differences between institutions. For the first time, a comprehensive, standardized and generally applicable set of methods and instruments for routine use in comparative quality measurement of inpatient parent-child prevention and rehabilitation is available. However, it should be considered that the very heterogeneous field of family-oriented measures can not be covered entirely by an external quality assurance program. Therefore, methods and instruments have to be adapted continuously to the specifics of this area of health care and to new developments. © Georg Thieme Verlag KG Stuttgart · New York.

Design concerns of room and pillar retreat panels

PubMed Central

Klemetti, Ted M.; Sears, Morgan M.; Tulu, Ihsan B.

2017-01-01

Why do some room and pillar retreat panels encounter abnormal conditions? What factors deserve the most consideration during the planning and execution phases of mining and what can be done to mitigate those abnormal conditions when they are encountered? To help answer these questions, and to determine some of the relevant factors influencing the conditions of room and pillar (R & P) retreat mining entries, four consecutive R & P retreat panels were evaluated. This evaluation was intended to reinforce the influence of topographic changes, depth of cover, multiple-seam interactions, geological conditions, and mining geometry. This paper details observations were made in four consecutive R & P retreat panels and the data were collected from an instrumentation site during retreat mining. The primary focus was on the differences observed among the four panels and within the panels themselves. The instrumentation study was initially planned to evaluate the interactions between primary and secondary support, but produced rather interesting results relating to the loading encountered under the current mining conditions. In addition to the observation and instrumentation, numerical modeling was performed to evaluate the stress conditions. Both the LaModel 3.0 and Rocscience Phase 2 programs were used to evaluate these four panels. The results of both models indicated a drastic reduction in the vertical stresses experienced in these panels due to the full extraction mining in overlying seams when compared to the full overburden load. Both models showed a higher level of stress associated with the outside entries of the panels. These results agree quite well with the observations and instrumentation studies performed at the mine. These efforts provided two overarching conclusions concerning R & P retreat mine planning and execution. The first was that there are four areas that should not be overlooked during R & P retreat mining: topographic relief, multiple-seam stress relief, stress concentrations near the gob edge, and geologic changes in the immediate roof. The second is that in order to successfully retreat an R & P panel, a three-phased approach to the design and analysis of the panel should be conducted: the planning phase, evaluation phase, and monitoring phase. PMID:28626598

Multidimensional Methods for the Formulation of Biopharmaceuticals and Vaccines

PubMed Central

Maddux, Nathaniel R.; Joshi, Sangeeta B.; Volkin, David B.; Ralston, John P.; Middaugh, C. Russell

2013-01-01

Determining and preserving the higher order structural integrity and conformational stability of proteins, plasmid DNA and macromolecular complexes such as viruses, virus-like particles and adjuvanted antigens is often a significant barrier to the successful stabilization and formulation of biopharmaceutical drugs and vaccines. These properties typically must be investigated with multiple lower resolution experimental methods, since each technique monitors only a narrow aspect of the overall conformational state of a macromolecular system. This review describes the use of empirical phase diagrams (EPDs) to combine large amounts of data from multiple high-throughput instruments and construct a map of a target macromolecule's physical state as a function of temperature, solvent conditions, and other stress variables. We present a tutorial on the mathematical methodology, an overview of some of the experimental methods typically used, and examples of some of the previous major formulation applications. We also explore novel applications of EPDs including potential new mathematical approaches as well as possible new biopharmaceutical applications such as analytical comparability, chemical stability, and protein dynamics. PMID:21647886

Adaptation of the University of Wisconsin High Spectral Resolution Lidar for Polarization and Multiple Scattering Measurements

NASA Technical Reports Server (NTRS)

Eloranta, E. W.; Piironen, P. K.

1996-01-01

Quantitative lidar measurements of aerosol scattering are hampered by the need for calibrations and the problem of correcting observed backscatter profiles for the effects of attenuation. The University of Wisconsin High Spectral Resolution Lidar (HSRL) addresses these problems by separating molecular scattering contributions from the aerosol scattering; the molecular scattering is then used as a calibration target that is available at each point in the observed profiles. While the HSRl approach has intrinsic advantages over competing techniques, realization of these advantages requires implementation of a technically demanding system which is potentially very sensitive to changes in temperature and mechanical alignments. This paper describes a new implementation of the HSRL in an instrumented van which allows measurements during field experiments. The HSRL was modified to measure depolarization. In addition, both the signal amplitude and depolarization variations with receiver field of view are simultaneously measured. This allows for discrimination of ice clouds from water clouds and observation of multiple scattering contributions to the lidar return.

Evaluating walking in patients with multiple sclerosis: which assessment tools are useful in clinical practice?

PubMed

Bethoux, Francois; Bennett, Susan

2011-01-01

Walking limitations are among the most visible manifestations of multiple sclerosis (MS). Regular walking assessments should be a component of patient management and require instruments that are appropriate from the clinician's and the patient's perspectives. This article reviews frequently used instruments to assess walking in patients with MS, with emphasis on their validity, reliability, and practicality in the clinical setting. Relevant articles were identified based on PubMed searches using the following terms: "multiple sclerosis AND (walking OR gait OR mobility OR physical activity) AND (disability evaluation)"; references of relevant articles were also searched. Although many clinician- and patient-driven instruments are available, not all have been validated in MS, and some are not sensitive enough to detect small but clinically important changes. Choosing among these depends on what needs to be measured, psychometric properties, the clinical relevance of results, and practicality with respect to space, time, and patient burden. Of the instruments available, the clinician-observed Timed 25-Foot Walk and patient self-report 12-Item Multiple Sclerosis Walking Scale have properties that make them suitable for routine evaluation of walking performance. The Dynamic Gait Index and the Timed Up and Go test involve other aspects of mobility, including balance. Tests of endurance, such as the 2- or 6-Minute Walk, may provide information on motor fatigue not captured by other tests. Quantitative measurement of gait kinetics and kinematics, and recordings of mobility in the patient's environment via accelerometry or Global Positioning System odometry, are currently not routinely used in the clinical setting.

Evaluating Walking in Patients with Multiple Sclerosis

PubMed Central

Bennett, Susan

2011-01-01

Walking limitations are among the most visible manifestations of multiple sclerosis (MS). Regular walking assessments should be a component of patient management and require instruments that are appropriate from the clinician's and the patient's perspectives. This article reviews frequently used instruments to assess walking in patients with MS, with emphasis on their validity, reliability, and practicality in the clinical setting. Relevant articles were identified based on PubMed searches using the following terms: “multiple sclerosis AND (walking OR gait OR mobility OR physical activity) AND (disability evaluation)”; references of relevant articles were also searched. Although many clinician- and patient-driven instruments are available, not all have been validated in MS, and some are not sensitive enough to detect small but clinically important changes. Choosing among these depends on what needs to be measured, psychometric properties, the clinical relevance of results, and practicality with respect to space, time, and patient burden. Of the instruments available, the clinician-observed Timed 25-Foot Walk and patient self-report 12-Item Multiple Sclerosis Walking Scale have properties that make them suitable for routine evaluation of walking performance. The Dynamic Gait Index and the Timed Up and Go test involve other aspects of mobility, including balance. Tests of endurance, such as the 2- or 6-Minute Walk, may provide information on motor fatigue not captured by other tests. Quantitative measurement of gait kinetics and kinematics, and recordings of mobility in the patient's environment via accelerometry or Global Positioning System odometry, are currently not routinely used in the clinical setting. PMID:24453700

Fresh Fuel Measurements With the Differential Die-Away Self-Interrogation Instrument

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trahan, Alexis C.; Belian, Anthony P.; Swinhoe, Martyn T.

The purpose of the Next Generation Safeguards Initiative (NGSI)-Spent Fuel (SF) Project is to strengthen the technical toolkit of safeguards inspectors and/or other interested parties. Thus the NGSI-SF team is working to achieve the following technical goals more easily and efficiently than in the past using nondestructive assay measurements of spent fuel assemblies: 1) verify the initial enrichment, burnup, and cooling time of facility declaration; 2) detect the diversion or replacement of pins; 3) estimate the plutonium mass; 4) estimate decay heat; and 5) determine the reactivity of spent fuel assemblies. The differential die-away self-interrogation (DDSI) instrument is one instrumentmore » that was assessed for years regarding its feasibility for robust, timely verification of spent fuel assemblies. The instrument was recently built and was tested using fresh fuel assemblies in a variety of configurations, including varying enrichment, neutron absorber content, and symmetry. The early die-away method, a multiplication determination method developed in simulation space, was successfully tested on the fresh fuel assembly data and determined multiplication with a root-mean-square (RMS) error of 2.9%. The experimental results were compared with MCNP simulations of the instrument as well. Low multiplication assemblies had agreement with an average RMS error of 0.2% in the singles count rate (i.e., total neutrons detected per second) and 3.4% in the doubles count rates (i.e., neutrons detected in coincidence per second). High-multiplication assemblies had agreement with an average RMS error of 4.1% in the singles and 13.3% in the doubles count rates.« less

Fresh Fuel Measurements With the Differential Die-Away Self-Interrogation Instrument

DOE PAGES

Trahan, Alexis C.; Belian, Anthony P.; Swinhoe, Martyn T.; ...

2017-01-05

The purpose of the Next Generation Safeguards Initiative (NGSI)-Spent Fuel (SF) Project is to strengthen the technical toolkit of safeguards inspectors and/or other interested parties. Thus the NGSI-SF team is working to achieve the following technical goals more easily and efficiently than in the past using nondestructive assay measurements of spent fuel assemblies: 1) verify the initial enrichment, burnup, and cooling time of facility declaration; 2) detect the diversion or replacement of pins; 3) estimate the plutonium mass; 4) estimate decay heat; and 5) determine the reactivity of spent fuel assemblies. The differential die-away self-interrogation (DDSI) instrument is one instrumentmore » that was assessed for years regarding its feasibility for robust, timely verification of spent fuel assemblies. The instrument was recently built and was tested using fresh fuel assemblies in a variety of configurations, including varying enrichment, neutron absorber content, and symmetry. The early die-away method, a multiplication determination method developed in simulation space, was successfully tested on the fresh fuel assembly data and determined multiplication with a root-mean-square (RMS) error of 2.9%. The experimental results were compared with MCNP simulations of the instrument as well. Low multiplication assemblies had agreement with an average RMS error of 0.2% in the singles count rate (i.e., total neutrons detected per second) and 3.4% in the doubles count rates (i.e., neutrons detected in coincidence per second). High-multiplication assemblies had agreement with an average RMS error of 4.1% in the singles and 13.3% in the doubles count rates.« less

Fighter pilots' heart rate, heart rate variation and performance during instrument approaches.

PubMed

Mansikka, Heikki; Simola, Petteri; Virtanen, Kai; Harris, Don; Oksama, Lauri

2016-10-01

Fighter pilots' heart rate (HR), heart rate variation (HRV) and performance during instrument approaches were examined. The subjects were required to fly instrument approaches in a high-fidelity simulator under various levels of task demand. The task demand was manipulated by increasing the load on the subjects by reducing the range at which they commenced the approach. HR and the time domain components of HRV were used as measures of pilot mental workload (PMWL). The findings of this study indicate that HR and HRV are sensitive to varying task demands. HR and HRV were able to distinguish the level of PMWL after which the subjects were no longer able to cope with the increasing task demands and their instrument landing system performance fell to a sub-standard level. The major finding was the HR/HRV's ability to differentiate the sub-standard performance approaches from the high-performance approaches. Practitioner Summary: This paper examined if HR and HRV were sensitive to varying task demands in a fighter aviation environment and if these measures were related to variations in pilot's performance.

An electronic circuit for sensing malfunctions in test instrumentation

NASA Technical Reports Server (NTRS)

Miller, W. M., Jr.

1969-01-01

Monitoring device differentiates between malfunctions occurring in the system undergoing test and malfunctions within the test instrumentation itself. Electronic circuits in the monitor use transistors to commutate silicon controlled rectifiers by removing the drive voltage, display circuits are then used to monitor multiple discrete lines.

New Worlds Observer Telescope and Instrument Optical Design Concepts

NASA Technical Reports Server (NTRS)

Howard, Joseph; Kilston, Steve; Kendrick, Steve

2008-01-01

Optical design concepts for the telescope and instrumentation for NASA's New Worlds Observer program are presented. First order parameters are derived from the science requirements, and estimated performance metrics are shown using optical models. A four meter multiple channel telescope is discussed, as well as a suite of science instrument concepts. Wide field instrumentation (imager and spectrograph) would be accommodated by a three-mirror anastigmat telescope design. Planet finding and characterization would use a separate channel which is picked off after the first two mirrors (primary and secondary). Guiding concepts are also discussed.

Multiple types of motives don't multiply the motivation of West Point cadets.

PubMed

Wrzesniewski, Amy; Schwartz, Barry; Cong, Xiangyu; Kane, Michael; Omar, Audrey; Kolditz, Thomas

2014-07-29

Although people often assume that multiple motives for doing something will be more powerful and effective than a single motive, research suggests that different types of motives for the same action sometimes compete. More specifically, research suggests that instrumental motives, which are extrinsic to the activities at hand, can weaken internal motives, which are intrinsic to the activities at hand. We tested whether holding both instrumental and internal motives yields negative outcomes in a field context in which various motives occur naturally and long-term educational and career outcomes are at stake. We assessed the impact of the motives of over 10,000 West Point cadets over the period of a decade on whether they would become commissioned officers, extend their officer service beyond the minimum required period, and be selected for early career promotions. For each outcome, motivation internal to military service itself predicted positive outcomes; a relationship that was negatively affected when instrumental motives were also in evidence. These results suggest that holding multiple motives damages persistence and performance in educational and occupational contexts over long periods of time.

Multiple types of motives don't multiply the motivation of West Point cadets

PubMed Central

Wrzesniewski, Amy; Schwartz, Barry; Cong, Xiangyu; Kane, Michael; Omar, Audrey; Kolditz, Thomas

2014-01-01

Although people often assume that multiple motives for doing something will be more powerful and effective than a single motive, research suggests that different types of motives for the same action sometimes compete. More specifically, research suggests that instrumental motives, which are extrinsic to the activities at hand, can weaken internal motives, which are intrinsic to the activities at hand. We tested whether holding both instrumental and internal motives yields negative outcomes in a field context in which various motives occur naturally and long-term educational and career outcomes are at stake. We assessed the impact of the motives of over 10,000 West Point cadets over the period of a decade on whether they would become commissioned officers, extend their officer service beyond the minimum required period, and be selected for early career promotions. For each outcome, motivation internal to military service itself predicted positive outcomes; a relationship that was negatively affected when instrumental motives were also in evidence. These results suggest that holding multiple motives damages persistence and performance in educational and occupational contexts over long periods of time. PMID:24982165

MEASURING EVERYDAY RACIAL/ETHNIC DISCRIMINATION IN HEALTH SURVEYS: How Best to Ask the Questions, in One or Two Stages, Across Multiple Racial/Ethnic Groups?

PubMed

Shariff-Marco, Salma; Breen, Nancy; Landrine, Hope; Reeve, Bryce B; Krieger, Nancy; Gee, Gilbert C; Williams, David R; Mays, Vickie M; Ponce, Ninez A; Alegría, Margarita; Liu, Benmei; Willis, Gordon; Johnson, Timothy P

2011-01-01

While it is clear that self-reported racial/ethnic discrimination is related to illness, there are challenges in measuring self-reported discrimination or unfair treatment. In the present study, we evaluate the psychometric properties of a self-reported instrument across racial/ ethnic groups in a population-based sample, and we test and interpret findings from applying two different widely-used approaches to asking about discrimination and unfair treatment. Even though we found that the subset of items we tested tap into a single underlying concept, we also found that different groups are more likely to report on different aspects of discrimination. Whether race is mentioned in the survey question affects both frequency and mean scores of reports of racial/ethnic discrimination. Our findings suggest caution to researchers when comparing studies that have used different approaches to measure racial/ethnic discrimination and allow us to suggest practical empirical guidelines for measuring and analyzing racial/ethnic discrimination. No less important, we have developed a self-reported measure of recent racial/ethnic discrimination that functions well in a range of different racial/ethnic groups and makes it possible to compare how racial/ethnic discrimination is associated with health disparities among multiple racial/ethnic groups.

The effects of alcohol on pilot performance during instrument flight.

DOT National Transportation Integrated Search

1972-01-01

Sixteen instrument-rated pilots, eight of whom were very experienced professional aviators, flew instrument landing system approaches in a Cessna 172 under simulated instrument flight conditions while sober and while under the influence of 40, 80, an...

Airline pilot scan patterns during simulated ILS approaches

NASA Technical Reports Server (NTRS)

Spady, A. A., Jr.

1978-01-01

A series of instrument landing system approaches were conducted using seven airline-rated Boeing 737 pilots in a Federal Aviation Administration qualified simulator. The test matrix included both manual and coupled approaches with and without atmospheric turbulence in Category II visibility conditions. A nonintrusive oculometer system was used to track the pilot eye-point-of-regard throughout the approach. The results indicate that, in general, the pilots use different scan techniques for the manual and coupled conditions and that the introduction of atmospheric turbulence does not greatly affect the scan behavior in either case. The pilots consistently ranked the instruments in terms of most used to least used. The ranking obtained from the oculometer data agrees with the pilot ranking for the flight director and airspeed, the most important instruments. However, the pilots apparently ranked the other instruments in terms of their concern for information rather than according to their actual scanning behavior.

Analysis of multiple mycotoxins in food.

PubMed

Hajslova, Jana; Zachariasova, Milena; Cajka, Tomas

2011-01-01

Mycotoxins are secondary metabolites of microscopic filamentous fungi. With regard to the widespread distribution of fungi in the environment, mycotoxins are considered to be one of the most important natural contaminants in foods and feeds. To protect consumers' health and reduce economic losses, surveillance and control of mycotoxins in food and feed has become a major objective for producers, regulatory authorities, and researchers worldwide. In this context, availability of reliable analytical methods applicable for this purpose is essential. Since the variety of chemical structures of mycotoxins makes impossible to use one single technique for their analysis, a vast number of analytical methods has been developed and validated. Both a large variability of food matrices and growing demands for a fast, cost-saving and accurate determination of multiple mycotoxins by a single method outline new challenges for analytical research. This strong effort is facilitated by technical developments in mass spectrometry allowing decreasing the influence of matrix effects in spite of omitting sample clean-up step. The current state-of-the-art together with future trends is presented in this chapter. Attention is focused mainly on instrumental method; advances in biosensors and other screening bioanalytical approaches enabling analysis of multiple mycotoxins are not discussed in detail.

NFIRAOS in 2015: engineering for future integration of complex subsystems

NASA Astrophysics Data System (ADS)

Atwood, Jenny; Andersen, David; Byrnes, Peter; Densmore, Adam; Fitzsimmons, Joeleff; Herriot, Glen; Hill, Alexis

2016-07-01

The Narrow Field InfraRed Adaptive Optics System (NFIRAOS) will be the first-light facility Adaptive Optics (AO) system for the Thirty Meter Telescope (TMT). NFIRAOS will be able to host three science instruments that can take advantage of this high performance system. NRC Herzberg is leading the design effort for this critical TMT subsystem. As part of the final design phase of NFIRAOS, we have identified multiple subsystems to be sub-contracted to Canadian industry. The scope of work for each subcontract is guided by the NFIRAOS Work Breakdown Structure (WBS) and is divided into two phases: the completion of the final design and the fabrication, assembly and delivery of the final product. Integration of the subsystems at NRC will require a detailed understanding of the interfaces between the subsystems, and this work has begun by defining the interface physical characteristics, stability, local coordinate systems, and alignment features. In order to maintain our stringent performance requirements, the interface parameters for each subsystem are captured in multiple performance budgets, which allow a bottom-up error estimate. In this paper we discuss our approach for defining the interfaces in a consistent manner and present an example error budget that is influenced by multiple subsystems.

cit: hypothesis testing software for mediation analysis in genomic applications.

PubMed

Millstein, Joshua; Chen, Gary K; Breton, Carrie V

2016-08-01

The challenges of successfully applying causal inference methods include: (i) satisfying underlying assumptions, (ii) limitations in data/models accommodated by the software and (iii) low power of common multiple testing approaches. The causal inference test (CIT) is based on hypothesis testing rather than estimation, allowing the testable assumptions to be evaluated in the determination of statistical significance. A user-friendly software package provides P-values and optionally permutation-based FDR estimates (q-values) for potential mediators. It can handle single and multiple binary and continuous instrumental variables, binary or continuous outcome variables and adjustment covariates. Also, the permutation-based FDR option provides a non-parametric implementation. Simulation studies demonstrate the validity of the cit package and show a substantial advantage of permutation-based FDR over other common multiple testing strategies. The cit open-source R package is freely available from the CRAN website (https://cran.r-project.org/web/packages/cit/index.html) with embedded C ++ code that utilizes the GNU Scientific Library, also freely available (http://www.gnu.org/software/gsl/). joshua.millstein@usc.edu Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Ion Mobility-Derived Collision Cross Section As an Additional Measure for Lipid Fingerprinting and Identification

PubMed Central

2014-01-01

Despite recent advances in analytical and computational chemistry, lipid identification remains a significant challenge in lipidomics. Ion-mobility spectrometry provides an accurate measure of the molecules’ rotationally averaged collision cross-section (CCS) in the gas phase and is thus related to ionic shape. Here, we investigate the use of CCS as a highly specific molecular descriptor for identifying lipids in biological samples. Using traveling wave ion mobility mass spectrometry (MS), we measured the CCS values of over 200 lipids within multiple chemical classes. CCS values derived from ion mobility were not affected by instrument settings or chromatographic conditions, and they were highly reproducible on instruments located in independent laboratories (interlaboratory RSD < 3% for 98% of molecules). CCS values were used as additional molecular descriptors to identify brain lipids using a variety of traditional lipidomic approaches. The addition of CCS improved the reproducibility of analysis in a liquid chromatography-MS workflow and maximized the separation of isobaric species and the signal-to-noise ratio in direct-MS analyses (e.g., “shotgun” lipidomics and MS imaging). These results indicate that adding CCS to databases and lipidomics workflows increases the specificity and selectivity of analysis, thus improving the confidence in lipid identification compared to traditional analytical approaches. The CCS/accurate-mass database described here is made publicly available. PMID:25495617

Combining IRIS/Hinode Observations and Modeling: a Pathfinder for Coronal Heating

NASA Astrophysics Data System (ADS)

Antolin, P.; Okamoto, J.; De Pontieu, B.

2015-12-01

The combination of imaging and spectroscopic instruments with multiple temperature diagnostics at high spatial, temporal and spectral resolution can allow to recover the 3D plasma flow and thermodynamic evolution associated with specific coronal heating mechanisms. Although very hard considering the complexity of the solar atmosphere, this approach is becoming possible now through combination of instruments such as IRIS and Hinode, and with proper guiding from advanced numerical simulations and forward modeling. In this talk I will review recent examples of this approach, focusing on a particular, recently published, case study, that serves as a pathfinder in the search for the dominant coronal heating mechanism. In this case, resonant absorption, a long hypothesised wave-related energy conversion mechanism is spotted in action for the first time, and is characterised by a peculiar 3D motion of the plasma. With the help of 3D MHD numerical simulations and forward modeling the observational signatures of resonant absorption are characterised, matching very well the observational results. The process through which this mechanism can lead to observed significant heating in the solar corona is further identified: the resonant flow becomes turbulent following dynamic instabilities and heats the plasma. I will show how this resonance + instability process is expected in different scenarios of the solar atmosphere (the corona, prominences and spicules) and can potentially explain several observed features that remain so far unexplained.

Integrating tristimulus colorimetry into pharmaceutical development for color selection and physical appearance control: a quality-by-design approach.

PubMed

Hetrick, Evan M; Vannoy, Jeffrey; Montgomery, Laura L; Pack, Brian W

2013-08-01

The color of pharmaceutical dosage forms can be an important aspect of product branding and patient compliance with a dosing regimen. During the development of drug products, it is important to understand the stability of not only the active pharmaceutical ingredient but also the color and appearance of the tablet or capsule. Currently, the most common method to ensure color stability is to conduct a visual test throughout a stability study. This visual test is subjective and can be expensive, especially if there is a failure late in development or after marketing approval. This work describes a series of studies using accelerated conditions (i.e., heat, humidity, and light) and logistic regression analyses that have been developed to determine the relative stability ranking of multiple color coatings early in development to provide an increased probability of technical success on long-term stability studies and to avoid coatings whose visual appearance may change over time. Once this relative stability ranking has been established, the stability advantages can be assessed versus any manufacturing/processing liabilities of the selected coating in order to make a data-driven decision around coating selection. This work reviews the basic fundamentals of colorimetry, followed by the description of a consistent experimental approach to correlate a visual rating with an instrumental measurement (e.g., dE(*) from a colorimeter) to remove the subjectivity from the assessment. This approach represents a novel strategy for establishing a probabilized correlation between the quantitative instrumental color measurement and the visual rating of the same color change. Copyright © 2013 Wiley Periodicals, Inc.

Infection control in healthcare settings: perspectives for mfDNA analysis in monitoring sanitation procedures.

PubMed

Valeriani, Federica; Protano, Carmela; Gianfranceschi, Gianluca; Cozza, Paola; Campanella, Vincenzo; Liguori, Giorgio; Vitali, Matteo; Divizia, Maurizio; Romano Spica, Vincenzo

2016-08-09

Appropriate sanitation procedures and monitoring of their actual efficacy represent critical points for improving hygiene and reducing the risk of healthcare-associated infections. Presently, surveillance is based on traditional protocols and classical microbiology. Innovation in monitoring is required not only to enhance safety or speed up controls but also to prevent cross infections due to novel or uncultivable pathogens. In order to improve surveillance monitoring, we propose that biological fluid microflora (mf) on reprocessed devices is a potential indicator of sanitation failure, when tested by an mfDNA-based approach. The survey focused on oral microflora traces in dental care settings. Experimental tests (n = 48) and an "in field" trial (n = 83) were performed on dental instruments. Conventional microbiology and amplification of bacterial genes by multiple real-time PCR were applied to detect traces of salivary microflora. Six different sanitation protocols were considered. A monitoring protocol was developed and performance of the mfDNA assay was evaluated by sensitivity and specificity. Contaminated samples resulted positive for saliva traces by the proposed approach (CT < 35). In accordance with guidelines, only fully sanitized samples were considered negative (100 %). Culture-based tests confirmed disinfectant efficacy, but failed in detecting incomplete sanitation. The method provided sensitivity and specificity over 95 %. The principle of detecting biological fluids by mfDNA analysis seems promising for monitoring the effectiveness of instrument reprocessing. The molecular approach is simple, fast and can provide a valid support for surveillance in dental care or other hospital settings.

Estimating Uncertainty in Long Term Total Ozone Records from Multiple Sources

NASA Technical Reports Server (NTRS)

Frith, Stacey M.; Stolarski, Richard S.; Kramarova, Natalya; McPeters, Richard D.

2014-01-01

Total ozone measurements derived from the TOMS and SBUV backscattered solar UV instrument series cover the period from late 1978 to the present. As the SBUV series of instruments comes to an end, we look to the 10 years of data from the AURA Ozone Monitoring Instrument (OMI) and two years of data from the Ozone Mapping Profiler Suite (OMPS) on board the Suomi National Polar-orbiting Partnership satellite to continue the record. When combining these records to construct a single long-term data set for analysis we must estimate the uncertainty in the record resulting from potential biases and drifts in the individual measurement records. In this study we present a Monte Carlo analysis used to estimate uncertainties in the Merged Ozone Dataset (MOD), constructed from the Version 8.6 SBUV2 series of instruments. We extend this analysis to incorporate OMI and OMPS total ozone data into the record and investigate the impact of multiple overlapping measurements on the estimated error. We also present an updated column ozone trend analysis and compare the size of statistical error (error from variability not explained by our linear regression model) to that from instrument uncertainty.

The Case for Musical Instrument Training in Cerebral Palsy for Neurorehabilitation

PubMed Central

2016-01-01

Recent imaging studies in cerebral palsy (CP) have described several brain structural changes, functional alterations, and neuroplastic processes that take place after brain injury during early development. These changes affect motor pathways as well as sensorimotor networks. Several of these changes correlate with behavioral measures of motor and sensory disability. It is now widely acknowledged that management of sensory deficits is relevant for rehabilitation in CP. Playing a musical instrument demands the coordination of hand movements with integrated auditory, visual, and tactile feedback, in a process that recruits multiple brain regions. These multiple demands during instrument playing, together with the entertaining character of music, have led to the development and investigation of music-supported therapies, especially for rehabilitation with motor disorders resulting from brain damage. We review scientific evidence that supports the use of musical instrument playing for rehabilitation in CP. We propose that active musical instrument playing may be an efficient means for triggering neuroplastic processes necessary for the development of sensorimotor skills in patients with early brain damage. We encourage experimental research on neuroplasticity and on its impact on the physical and personal development of individuals with CP. PMID:27867664

Learning language from within: Children use semantic generalizations to infer word meanings.

PubMed

Srinivasan, Mahesh; Al-Mughairy, Sara; Foushee, Ruthe; Barner, David

2017-02-01

One reason that word learning presents a challenge for children is because pairings between word forms and meanings are arbitrary conventions that children must learn via observation - e.g., the fact that "shovel" labels shovels. The present studies explore cases in which children might bypass observational learning and spontaneously infer new word meanings: By exploiting the fact that many words are flexible and systematically encode multiple, related meanings. For example, words like shovel and hammer are nouns for instruments, and verbs for activities involving those instruments. The present studies explored whether 3- to 5-year-old children possess semantic generalizations about lexical flexibility, and can use these generalizations to infer new word meanings: Upon learning that dax labels an activity involving an instrument, do children spontaneously infer that dax can also label the instrument itself? Across four studies, we show that at least by age four, children spontaneously generalize instrument-activity flexibility to new words. Together, our findings point to a powerful way in which children may build their vocabulary, by leveraging the fact that words are linked to multiple meanings in systematic ways. Copyright © 2016 Elsevier B.V. All rights reserved.

The Case for Musical Instrument Training in Cerebral Palsy for Neurorehabilitation.

PubMed

Alves-Pinto, Ana; Turova, Varvara; Blumenstein, Tobias; Lampe, Renée

2016-01-01

Recent imaging studies in cerebral palsy (CP) have described several brain structural changes, functional alterations, and neuroplastic processes that take place after brain injury during early development. These changes affect motor pathways as well as sensorimotor networks. Several of these changes correlate with behavioral measures of motor and sensory disability. It is now widely acknowledged that management of sensory deficits is relevant for rehabilitation in CP. Playing a musical instrument demands the coordination of hand movements with integrated auditory, visual, and tactile feedback, in a process that recruits multiple brain regions. These multiple demands during instrument playing, together with the entertaining character of music, have led to the development and investigation of music-supported therapies, especially for rehabilitation with motor disorders resulting from brain damage. We review scientific evidence that supports the use of musical instrument playing for rehabilitation in CP. We propose that active musical instrument playing may be an efficient means for triggering neuroplastic processes necessary for the development of sensorimotor skills in patients with early brain damage. We encourage experimental research on neuroplasticity and on its impact on the physical and personal development of individuals with CP.

Cross-species multiple environmental stress responses: An integrated approach to identify candidate genes for multiple stress tolerance in sorghum (Sorghum bicolor (L.) Moench) and related model species

PubMed Central

Modise, David M.; Gemeildien, Junaid; Ndimba, Bongani K.; Christoffels, Alan

2018-01-01

Background Crop response to the changing climate and unpredictable effects of global warming with adverse conditions such as drought stress has brought concerns about food security to the fore; crop yield loss is a major cause of concern in this regard. Identification of genes with multiple responses across environmental stresses is the genetic foundation that leads to crop adaptation to environmental perturbations. Methods In this paper, we introduce an integrated approach to assess candidate genes for multiple stress responses across-species. The approach combines ontology based semantic data integration with expression profiling, comparative genomics, phylogenomics, functional gene enrichment and gene enrichment network analysis to identify genes associated with plant stress phenotypes. Five different ontologies, viz., Gene Ontology (GO), Trait Ontology (TO), Plant Ontology (PO), Growth Ontology (GRO) and Environment Ontology (EO) were used to semantically integrate drought related information. Results Target genes linked to Quantitative Trait Loci (QTLs) controlling yield and stress tolerance in sorghum (Sorghum bicolor (L.) Moench) and closely related species were identified. Based on the enriched GO terms of the biological processes, 1116 sorghum genes with potential responses to 5 different stresses, such as drought (18%), salt (32%), cold (20%), heat (8%) and oxidative stress (25%) were identified to be over-expressed. Out of 169 sorghum drought responsive QTLs associated genes that were identified based on expression datasets, 56% were shown to have multiple stress responses. On the other hand, out of 168 additional genes that have been evaluated for orthologous pairs, 90% were conserved across species for drought tolerance. Over 50% of identified maize and rice genes were responsive to drought and salt stresses and were co-located within multifunctional QTLs. Among the total identified multi-stress responsive genes, 272 targets were shown to be co-localized within QTLs associated with different traits that are responsive to multiple stresses. Ontology mapping was used to validate the identified genes, while reconstruction of the phylogenetic tree was instrumental to infer the evolutionary relationship of the sorghum orthologs. The results also show specific genes responsible for various interrelated components of drought response mechanism such as drought tolerance, drought avoidance and drought escape. Conclusions We submit that this approach is novel and to our knowledge, has not been used previously in any other research; it enables us to perform cross-species queries for genes that are likely to be associated with multiple stress tolerance, as a means to identify novel targets for engineering stress resistance in sorghum and possibly, in other crop species. PMID:29590108

Simplified Approach Charts Improve Data Retrieval Performance

PubMed Central

Stewart, Michael; Laraway, Sean; Jordan, Kevin; Feary, Michael S.

2016-01-01

The effectiveness of different instrument approach charts to deliver minimum visibility and altitude information during airport equipment outages was investigated. Eighteen pilots flew simulated instrument approaches in three conditions: (a) normal operations using a standard approach chart (standard-normal), (b) equipment outage conditions using a standard approach chart (standard-outage), and (c) equipment outage conditions using a prototype decluttered approach chart (prototype-outage). Errors and retrieval times in identifying minimum altitudes and visibilities were measured. The standard-outage condition produced significantly more errors and longer retrieval times versus the standard-normal condition. The prototype-outage condition had significantly fewer errors and shorter retrieval times than did the standard-outage condition. The prototype-outage condition produced significantly fewer errors but similar retrieval times when compared with the standard-normal condition. Thus, changing the presentation of minima may reduce risk and increase safety in instrument approaches, specifically with airport equipment outages. PMID:28491009

A critical enquiry into the psychometric properties of the professional quality of life scale (ProQol-5) instrument.

PubMed

Hemsworth, David; Baregheh, Anahita; Aoun, Samar; Kazanjian, Arminee

2018-02-01

This study had conducted a comprehensive analysis of the psychometric properties of Proqol 5, professional quality of work instrument among nurses and palliative care-workers on the basis of three independent datasets. The goal is to see the general applicability of this instrument across multiple populations. Although the Proqol scale has been widely adopted, there are few attempts that have thoroughly analyzed this instrument across multiple datasets using multiple populations. A questionnaire was developed and distributed to palliative care-workers in Canada and Nurses at two hospitals in Australia and Canada, this resulted in 273 datasets from the Australian and 303 datasets from the Canadian nurses and 503 datasets from the Canadian palliative care-workers. A comprehensive psychometric property analysis was conducted including inter-item correlations, tests of reliability, and both convergent and discriminant validity as well as construct validity analyses. In addition, to test for the reverse coding artifacts in the BO scale, exploratory factor analysis was adopted. The psychometric property analysis of Proqol 5 was satisfactory for the compassion satisfaction construct. However, there are concerns with respect to the burnout and secondary trauma stress scales and recommendations are made regarding the coding and specific items which should improve the reliability and validity of these scales. This research establishes the strengths and weaknesses of the Proqol instrument and demonstrates how it can be improved. Through specific recommendations, the academic community is invited to revise the burnout and secondary traumatic stress scales in an effort to improve Proqol 5 measures. Copyright © 2017. Published by Elsevier Inc.

Can masses of non-experts train highly accurate image classifiers? A crowdsourcing approach to instrument segmentation in laparoscopic images.

PubMed

Maier-Hein, Lena; Mersmann, Sven; Kondermann, Daniel; Bodenstedt, Sebastian; Sanchez, Alexandro; Stock, Christian; Kenngott, Hannes Gotz; Eisenmann, Mathias; Speidel, Stefanie

2014-01-01

Machine learning algorithms are gaining increasing interest in the context of computer-assisted interventions. One of the bottlenecks so far, however, has been the availability of training data, typically generated by medical experts with very limited resources. Crowdsourcing is a new trend that is based on outsourcing cognitive tasks to many anonymous untrained individuals from an online community. In this work, we investigate the potential of crowdsourcing for segmenting medical instruments in endoscopic image data. Our study suggests that (1) segmentations computed from annotations of multiple anonymous non-experts are comparable to those made by medical experts and (2) training data generated by the crowd is of the same quality as that annotated by medical experts. Given the speed of annotation, scalability and low costs, this implies that the scientific community might no longer need to rely on experts to generate reference or training data for certain applications. To trigger further research in endoscopic image processing, the data used in this study will be made publicly available.

Laser Atmospheric Transmitter Receiver-Network (LAnTeRN): A new approach for active measurement of atmospheric greenhouse gases

NASA Astrophysics Data System (ADS)

Dobler, J. T.; Braun, M.; Zaccheo, T.

2012-12-01

The Laser Atmospheric Transmitter Receiver-Network (LAnTeRN) is a new measurement concept that will enable local, regional and continental determination of key greenhouse gases, with unparalleled accuracy and precision. This new approach will offer the ability to make low bias, high precision, quasi-continuous, measurements to the accuracies required for separating anthropogenic and biogenic sources and sinks. In 2004 ITT Exelis developed an airborne demonstration unit, based on an intensity modulated continuous wave (IM-CW) lidar approach, for actively measuring atmospheric CO2 and O2. The multi-functional fiber laser lidar (MFLL) system relies on low peak power, high reliability, and efficient telecom laser components to implement this unique measurement approach. While evaluating methods for discriminating against thin clouds for the MFLL instrument, a new measurement concept was conceived. LAnTeRN has several fundamental characteristics in common with the MFLL instrument, but is a fundamentally different implementation and capability. The key difference is that LAnTeRN operates in transmission rather than in the traditional backscatter lidar configuration, which has several distinct advantages. Operating as a forward scatter, bistatic lidar system, LAnTeRN enables consideration of continuous monitoring from a geostationary orbit to multiple locations on the ground. Having the receivers on the ground significantly lowers cost and risk compared to an all space based mission, and allows the transmitter subsystem to be implemented, near term, as a hosted payload. Furthermore, the LAnTeRN measurement approach is also applicable for ground to ground measurements where high precision measurements over a long open path is required, such as facilities monitoring, or monitoring of passive volcanoes and fault lines. Using narrow linewidth laser sources allows flexibility to select the position on the absorption feature being probed. This feature allows for weighting the absorption toward lower altitudes for the space implementation or to handle large dynamic range measurements as would be required for volcano monitoring. This presentation will discuss results from a detailed instrument performance analyses, retrieval simulations, and from initial testing of a proof of concept demonstration unit being developed by Exelis. Initial analysis indicate that measurements from a transmitter in geostationary orbit to 25 ground receivers in the eastern U.S. can retrieve column integrated CO2 values to a precision of <0.2 ppm on monthly averages and <0.06 ppm on yearly averages, using conservative estimates of cloud cover and aerosol loading. The capability for continuous monitoring over a fixed geometry makes it possible to independently characterize the atmospheric column, using existing capabilities (e.g. aircore, aircraft and in-situ instrumentation), for quantification of bias. Furthermore, the ability to selectively locate the ground receivers can enable focused studies for specific applications.

Evaluation of prototype air carrier instrument approach procedure charts.

DOT National Transportation Integrated Search

1995-07-31

The objective of this study was to evaluate the design features of two prototype Instrument Approach Procedure (IAP) charts. The John A. Volpe National Transportation System's Center in cooperation with the Air Transport Association's Chart and Data ...

Engineering approaches and compromises in the design of small ion mobility spectrometers

NASA Technical Reports Server (NTRS)

Bradshaw, R. F. D.

1995-01-01

The engineering approaches in the design phase of small portable I.M.S.-based instruments are discussed. The choices available are described, and their effect on instrument dimensions analyzed. Possible future developments are outlined.

Evaluation of prototype air carrier instrument approach procedure charts

DOT National Transportation Integrated Search

1995-07-01

The objective of this study was to evaluate the design features of two prototype Instrument Approach Procedure (IAP) charts. The John A. Volpe National Transportation Systems Center in cooperation with the Air Transport Association's Chart and Data D...

Evaluation of Complex Human Performance: The Promise of Computer-Based Simulation

ERIC Educational Resources Information Center

Newsom, Robert S.; And Others

1978-01-01

For the training and placement of professional workers, multiple-choice instruments are the norm for wide-scale measurement and evaluation efforts. These instruments contain fundamental problems. Computer-based management simulations may provide solutions to these problems, appear scoreable and reliable, offer increased validity, and are better…

Toward a Critical Instructional Technology: Instrumental Rationality, Objectification, and Psychologism

ERIC Educational Resources Information Center

Gur, Bekir S.

2007-01-01

Using a multiple-paper format, this dissertation includes three papers. By providing critiques of instrumental rationality, objectification, and psychologism in instructional technology," this study aims to provide a tentative formulation of a "critical instructional technology that is sensitive to power and ethics. The first article starts by…

The Development of Two Self-Assessment Work Value Instruments.

ERIC Educational Resources Information Center

Boyle, John R.

In response to input from the employment and training community, the Department of Labor's Assessment and Research Development Program (ARDP) and its state partners have developed two self-assessment work value instruments to be incorporated into career exploration and counseling programs. Computerized multiple rank-order and paper-and-pencil…

Development and Validation of an Instrument for Assessing Mathematics Classroom Environment in Tertiary Institutions

ERIC Educational Resources Information Center

Yin, Hongbiao; Lu, Genshu

2014-01-01

This report describes the development and validation of an instrument, the University Mathematics Classroom Environment Questionnaire (UMCEQ), for assessing the mathematics classroom environment in tertiary institutions in China. Through the use of multiple methods, including exploratory and confirmatory factor analyses, on two independent samples…

Implementation of Instrumental Variable Bounds for Data Missing Not at Random.

PubMed

Marden, Jessica R; Wang, Linbo; Tchetgen, Eric J Tchetgen; Walter, Stefan; Glymour, M Maria; Wirth, Kathleen E

2018-05-01

Instrumental variables are routinely used to recover a consistent estimator of an exposure causal effect in the presence of unmeasured confounding. Instrumental variable approaches to account for nonignorable missing data also exist but are less familiar to epidemiologists. Like instrumental variables for exposure causal effects, instrumental variables for missing data rely on exclusion restriction and instrumental variable relevance assumptions. Yet these two conditions alone are insufficient for point identification. For estimation, researchers have invoked a third assumption, typically involving fairly restrictive parametric constraints. Inferences can be sensitive to these parametric assumptions, which are typically not empirically testable. The purpose of our article is to discuss another approach for leveraging a valid instrumental variable. Although the approach is insufficient for nonparametric identification, it can nonetheless provide informative inferences about the presence, direction, and magnitude of selection bias, without invoking a third untestable parametric assumption. An important contribution of this article is an Excel spreadsheet tool that can be used to obtain empirical evidence of selection bias and calculate bounds and corresponding Bayesian 95% credible intervals for a nonidentifiable population proportion. For illustrative purposes, we used the spreadsheet tool to analyze HIV prevalence data collected by the 2007 Zambia Demographic and Health Survey (DHS).

NASA Research For Instrument Approaches To Closely Spaced Parallel Runways

NASA Technical Reports Server (NTRS)

Elliott, Dawn M.; Perry, R. Brad

2000-01-01

Within the NASA Aviation Systems Capacity Program, the Terminal Area Productivity (TAP) Project is addressing airport capacity enhancements during instrument meteorological condition (IMC). The Airborne Information for Lateral Spacing (AILS) research within TAP has focused on an airborne centered approach for independent instrument approaches to closely spaced parallel runways using Differential Global Positioning System (DGPS) and Automatic Dependent Surveillance-Broadcast (ADS-B) technologies. NASA Langley Research Center (LaRC), working in partnership with Honeywell, Inc., completed in AILS simulation study, flight test, and demonstration in 1999 examining normal approaches and potential collision scenarios to runways with separation distances of 3,400 and 2,500 feet. The results of the flight test and demonstration validate the simulation study.

Control of the positional relationship between a sample collection instrument and a surface to be analyzed during a sampling procedure with image analysis

DOEpatents

Van Berkel, Gary J.; Kertesz, Vilmos

2011-08-09

A system and method utilizes an image analysis approach for controlling the collection instrument-to-surface distance in a sampling system for use, for example, with mass spectrometric detection. Such an approach involves the capturing of an image of the collection instrument or the shadow thereof cast across the surface and the utilization of line average brightness (LAB) techniques to determine the actual distance between the collection instrument and the surface. The actual distance is subsequently compared to a target distance for re-optimization, as necessary, of the collection instrument-to-surface during an automated surface sampling operation.

RIS4E at Kilauea's December 1974 Flow: Chemical, mineralogical and spectral characteristics of Hawaiian basaltic alteration products measured with portable instruments

NASA Astrophysics Data System (ADS)

Young, K. E.; Rogers, D.; Dyar, M. D.; Ito, G.; Yant, M.; McAdam, A.; Bleacher, J. E.; Glotch, T. D.

2015-12-01

A major objective of the SSERVI RIS4E (Remote, In-situ, and Synchrotron Studies for Science and Exploration) investigation is to evaluate the performance of portable chemical and mineralogical instruments in a variety of planetary volcanic analog settings. To that end, we used a suite of true/proxy portable instruments (XRF, LIBS, XRD, near-IR and mid-IR spectrometers), to measure the chemical and spectral characteristics of young basaltic flows (erupted December 1974, or D1974) within the southwest rift zone of Kilauea, Hawaii. The D1974 lavas exhibit multiple flow morphologies and textures, and have undergone alteration by a variety of processes, including acid weathering, oxidation and devitrification. The mineralogy, chemistry and infrared spectral properties of select samples from these altered surfaces have been well characterized by previous groups using high resolution (e.g. SEM, TEM) and/or laboratory measurements (XRD, Mossbauer, infrared). Typical alteration products include coatings of Fe-Ti-oxide +/- an overlying silica-rich coating. Coatings are commonly discontinuous and vary in color. Oxidation fronts are also present, most visible as reddish brown discoloration along the edges of broken and uplifted flow crusts. The previous detailed characterizations provide the basis for evaluating instrument performance and also allow us to assess areas where portable instruments can contribute new information to current understanding. These areas include characterizing the spatial variability in alteration chemistry/mineralogy, relating chemical/mineralogical properties to texture and context, and comparing chemical/mineralogical variations with infrared spectral properties. Because infrared spectra are commonly used to assess compositional variations of a site remotely, either from the ground or from orbit, relating changes in chemistry and mineralogy to spectral variations is particularly important. Last, the D1974 site provides an excellent location to test the performance of portable chemical instruments on coated surfaces of variable texture. Results from this multi-technique approach will be presented at the meeting.

Development of Long-term Datasets from Satellite BUV Instruments: The "Soft" Calibration Approach

NASA Technical Reports Server (NTRS)

Bhartia, Pawan K.; Taylor, Steven; Jaross, Glen

2005-01-01

The first BUV instrument was launched in April 1970 on NASA's Nimbus4 satellite. More than a dozen instruments, broadly based on the same principle, but using very different technologies, have been launched in the last 35 years on NASA, NOAA, Japanese and European satellites. In this paper we describe the basic principles of the "soft" calibration approach that we have successfully applied to the data from many of these instruments to produce a consistent long-term record of total ozone, ozone profile and aerosols. This approach is based on using accurate radiative transfer models and assumed/known properties of the atmosphere in ultraviolet to derive calibration parameters. Although the accuracy of the results inevitably depends upon how well the assumed atmospheric properties are known, the technique has several built-in cross- checks that improve the robustness of the method. To develop further confidence in the data the soft calibration technique can be combined with data collected from few well- calibrated ground-based instruments. We will use examples from past and present BUV instruments to show how the method works.

A pilot's opinion - VTOL control design requirements for the instrument approach task.

NASA Technical Reports Server (NTRS)

Patton, J. M., Jr.

1972-01-01

This paper presents pilot opinion supported by test data concerning flight control and display concepts and control system design requirements for VTOL aircraft in the instrument approach task. Material presented is drawn from research flights in the following aircraft: Dornier DO-31, Short SC-1, LTV XC-142A, and Boeing-Vertol CH-46. The control system concepts and mechanizations employed in the above aircraft are discussed, and the effect of control system augmentation is shown on performance. Operational procedures required in the instrument approach task are described, with comments on need for automation and combining of control functions.

A Flexible and Non-instrusive Approach for Computing Complex Structural Coverage Metrics

NASA Technical Reports Server (NTRS)

Whalen, Michael W.; Person, Suzette J.; Rungta, Neha; Staats, Matt; Grijincu, Daniela

2015-01-01

Software analysis tools and techniques often leverage structural code coverage information to reason about the dynamic behavior of software. Existing techniques instrument the code with the required structural obligations and then monitor the execution of the compiled code to report coverage. Instrumentation based approaches often incur considerable runtime overhead for complex structural coverage metrics such as Modified Condition/Decision (MC/DC). Code instrumentation, in general, has to be approached with great care to ensure it does not modify the behavior of the original code. Furthermore, instrumented code cannot be used in conjunction with other analyses that reason about the structure and semantics of the code under test. In this work, we introduce a non-intrusive preprocessing approach for computing structural coverage information. It uses a static partial evaluation of the decisions in the source code and a source-to-bytecode mapping to generate the information necessary to efficiently track structural coverage metrics during execution. Our technique is flexible; the results of the preprocessing can be used by a variety of coverage-driven software analysis tasks, including automated analyses that are not possible for instrumented code. Experimental results in the context of symbolic execution show the efficiency and flexibility of our nonintrusive approach for computing code coverage information

Social and behavioral research in genomic sequencing: approaches from the Clinical Sequencing Exploratory Research Consortium Outcomes and Measures Working Group.

PubMed

Gray, Stacy W; Martins, Yolanda; Feuerman, Lindsay Z; Bernhardt, Barbara A; Biesecker, Barbara B; Christensen, Kurt D; Joffe, Steven; Rini, Christine; Veenstra, David; McGuire, Amy L

2014-10-01

The routine use of genomic sequencing in clinical medicine has the potential to dramatically alter patient care and medical outcomes. To fully understand the psychosocial and behavioral impact of sequencing integration into clinical practice, it is imperative that we identify the factors that influence sequencing-related decision making and patient outcomes. In an effort to develop a collaborative and conceptually grounded approach to studying sequencing adoption, members of the National Human Genome Research Institute's Clinical Sequencing Exploratory Research Consortium formed the Outcomes and Measures Working Group. Here we highlight the priority areas of investigation and psychosocial and behavioral outcomes identified by the Working Group. We also review some of the anticipated challenges to measurement in social and behavioral research related to genomic sequencing; opportunities for instrument development; and the importance of qualitative, quantitative, and mixed-method approaches. This work represents the early, shared efforts of multiple research teams as we strive to understand individuals' experiences with genomic sequencing. The resulting body of knowledge will guide recommendations for the optimal use of sequencing in clinical practice.

[Flexible endoscope in thoracic surgery: CITES or cVATS?].

PubMed

Assouad, J; Fénane, H; Masmoudi, H; Giol, M; Karsenti, A; Gounant, V; Grunenwald, D

2013-10-01

Early pain and persistent parietal disorders remains a major unresolved problem in thoracic surgery. Thoracotomy and the use of multiple ports in most Video Assisted Thoracic Surgery (VATS) procedures are the major cause of this persistent pain. For the last decade, a few publications describing the use of either single incision VATS and cervical thoracic approaches have been reported without significant results in comparison with current used techniques. Intercostals compression during surgery and early after by intercostals chest tube placement, are probably the major cause of postoperative pain. Flexible endoscope is currently used in several surgeries and will take more and more importance in our daily use in thoracic surgery. Instrument flexibility allows its use through minimally invasive approaches and offers a very interesting intra-thoracic navigation. We describe here the first use in France of a flexible endoscope in thoracic surgery through a single cervical incision to perform simultaneous exploration and biopsies of the mediastinum and right pleura using the original approach of Cervical Incision Thoracic Endoscopic Surgery (CITES). Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Development of a generic system for real-time data access and remote control of multiple in-situ water quality monitoring instruments

NASA Astrophysics Data System (ADS)

Wright, S. A.; Bennett, G. E.; Andrews, T.; Melis, T. S.; Topping, D. J.

2005-05-01

Currently, in-situ monitoring of water quality parameters (e.g. water temperature, conductivity, turbidity) in the Colorado River ecosystem typically consists of deploying instruments in the river, retrieving them at a later date, downloading the datalogger, then examining the data; an arduous process in the remote settings of Grand Canyon. Under this protocol, data is not available real-time and there is no way to detect problems with the instrumentation until after retrieval. The next obvious stage in the development of in-situ monitoring in Grand Canyon was the advent of one-way telemetry, i.e. streaming data in real-time from the instrument to the office and/or the world-wide-web. This protocol allows for real-time access to data and the identification of instrumentation problems, but still requires a site visit to address instrument malfunctions, i.e. the user does not have the ability to remotely control the instrument. At some field sites, such as the Colorado River in Grand Canyon, site visitation is restricted by remoteness and lack of traditional access routes (i.e. roads). Even at less remote sites, it may still be desirable to have two-way communication with instruments in order to, for example, diagnose and potentially fix instrumentation problems, change sampling parameters to save battery power, etc., without having to visit the site. To this end, the U.S. Geological Survey, Grand Canyon Monitoring and Research Center, is currently developing and testing a high-speed, two-way communication system that allows for real-time data access and remote control of instrumentation. The approach tested relies on internet access and may be especially useful in areas where land-line or cellular connections are unavailable. The system is composed of off-the-shelf products, uses a commercial broadband satellite service, and is designed in a generic way such that any instrument that communicates through RS-232 communication (i.e. a serial port) is compatible with the system. We are currently testing the system at two sites on the Colorado River in Grand Canyon and at one critical monitoring site on the Paria River where we have deployed suites of instruments for monitoring flow, sediment concentration, temperature, and conductivity. One aspect of the system that may be particularly useful for ecohydrological applications is the ability to remotely control on-site pump samplers, which allows for the collection of a water sample by the press of a button in the office.

Rayleigh-based, multi-element coral thermometry: A biomineralization approach to developing climate proxies

USGS Publications Warehouse

Gaetani, G.A.; Cohen, A.L.; Wang, Z.; Crusius, John

2011-01-01

This study presents a new approach to coral thermometry that deconvolves the influence of water temperature on skeleton composition from that of “vital effects”, and has the potential to provide estimates of growth temperatures that are accurate to within a few tenths of a degree Celsius from both tropical and cold-water corals. Our results provide support for a physico-chemical model of coral biomineralization, and imply that Mg2+ substitutes directly for Ca2+ in biogenic aragonite. Recent studies have identified Rayleigh fractionation as an important influence on the elemental composition of coral skeletons. Daily, seasonal and interannual variations in the amount of aragonite precipitated by corals from each “batch” of calcifying fluid can explain why the temperature dependencies of elemental ratios in coral skeleton differ from those of abiogenic aragonites, and are highly variable among individual corals. On the basis of this new insight into the origin of “vital effects” in coral skeleton, we developed a Rayleigh-based, multi-element approach to coral thermometry. Temperature is resolved from the Rayleigh fractionation signal by combining information from multiple element ratios (e.g., Mg/Ca, Sr/Ca, Ba/Ca) to produce a mathematically over-constrained system of Rayleigh equations. Unlike conventional coral thermometers, this approach does not rely on an initial calibration of coral skeletal composition to an instrumental temperature record. Rather, considering coral skeletogenesis as a biologically mediated, physico-chemical process provides a means to extract temperature information from the skeleton composition using the Rayleigh equation and a set of experimentally determined partition coefficients. Because this approach is based on a quantitative understanding of the mechanism that produces the “vital effect” it should be possible to apply it both across scleractinian species and to corals growing in vastly different environments. Where instrumental temperature records are available, a Rayleigh-based framework allows the effects of stress on coral calcification to be identified on the basis of anomalies in the skeletal composition.

An Approach to Evaluate the Spatial Fidelity of Satellite-Derived Sea Surface Temperature Fields

NASA Astrophysics Data System (ADS)

Cornillon, P. C.; Wu, F.; Guan, L.; Boussidi, B.

2016-12-01

An approach to evaluate the spatial fidelity of satellite-derived SST fields for spatial scales in the range of one to a few tens of pixels is presented. The approach is based on spatial spectra of the SST fields in an oceanographically `quiet' region, the Sargasso Sea between the southern edge of the Gulf Stream and Bermuda. Spectra are relatively isotropic in this region, allowing for analysis of the spectra in along-scan and cross-scan directions for level 2 fields and in coordinate directions for level 3 and level 4 fields, and spectral energy levels tend to be low for the ocean, allowing for a diagnosis of the pixel-to-pixel noise levels in the associated spectra. The focus on the spatial fidelity of the derived fields is intended to fill a gap in the measure of the overall quality of satellite-derived SST fields. To date the primary measure of these data has been via the comparison of in situ buoy measurements with `match-ups' from the satellite-derived fields. Such measures provide for the accuracy of the retrievals but not of their spatial precision. The approach presented here addresses the latter. Spectra obtained in this region from the satellite-borne sensors are compared with those obtained from a thermal recorder on the container ship Oleander making weekly roundtrips between Port Elizabeth, NJ and Bermuda. To demonstrate the approach, it is applied to Level 2 VIIRS and AVHRR SST fields. The most accurate spectra for VIIRS fields are obtained for nighttime sections in the along-scan direction within 500 km of nadir. Along-track sections show signs of banding from the multiple detectors of the VIIRS instrument. By contrast AVHRR spectra show elevated energy at the submesoscale (<25km), likely due to instrument noise but poor cloud-screening may also contribute the spectral energy at these scales.

Integrative platform based on the mechatronics model for educational technologies focused on competence

NASA Astrophysics Data System (ADS)

Vlaşin, I.; Greta, S.; Dache, L.; Mătieş, V.

2016-08-01

Mechatronics is a model of transdisciplinary integration, entirely functional, with remarkable results for mankind. The incredible progress that the global economy has taken in the last decades is based on this new approach, the integrative type, which is present at the foundation of mechatronics. This kind of integrative approach is necessary for building a quality education focused on competence. The requirements from the social and economic environment, the needs of the young people who prepare themselves for an active life and the offers of the education providers are still not too interconnected to offer a satisfying education. This is the reason why the efforts to balance the demand, the needs and the offer are essential to ensure a better integration of students into society. Using a transcultural perspective, we can achieve a constructive approach. The education providers, together with the socio-economic environment, establish a clear structure of competence in multiple domains and of the instruments which can assure it. The scientific demarche, in the spirit of this paper approach the, answers the natural questions from the educational process: „Why, How and What do I learn?”.

Reproducibility and Repeatability of Site-noise and Instrument Self-noise from Multiple Installations of Broadband Seismometers

NASA Astrophysics Data System (ADS)

Holland, A. A.; Ringler, A. T.; Wilson, D.

2016-12-01

We attempt to estimate lower bounds on the repeatability for a number of common instrumentation parameters and provide estimates on the errors associated with the instrument installation itself. These parameters include the self-noise, the orientation, and the sensitivity. We installed three Trillium Compact instruments within 30 cm of each other in the same seismic vault at the Albuquerque Seismological Laboratory. We then repeatedly uninstall and reinstall one of the Trillium Compact instruments multiple times, while leaving the other two in place as reference installations. Using these trials we are then able to examine how repeatable several parameters are between the two reference instruments and the other instrument. We also completely uninstalled and reinstalled the three seismometers once during the testing, in order to examine the reproducibility of the entire experiment. Results indicate that relative sensitivity is highly repeatable, which is partly why we chose this particular sensor for this evaluation. We find that self-noise in the band of 0.1 to 30 s period of an instrument is repeatable to within about 2 dB. Increasing the period of interest from 30 to 100 s period we observe that the self-noise of an instrument can only be repeated to within about 3 dB and that the relative self-noise is not repeatable amongst the sensors. We also find that even though the seismometers are centimeters apart on a single marked line, that the relative orientation between installations is only repeatable to within 1-2 degrees. However, the relative orientations are reproducible, that is, with each installation the relative orientations are within the same amount of uncertainty. Some other broadband or very broadband instruments may not show as much repeatability between installations for some of the metrics we examined. From these tests we can say that instrument self-noise tests are reproducible to within a few dB.

Dealing with dietary measurement error in nutritional cohort studies.

PubMed

Freedman, Laurence S; Schatzkin, Arthur; Midthune, Douglas; Kipnis, Victor

2011-07-20

Dietary measurement error creates serious challenges to reliably discovering new diet-disease associations in nutritional cohort studies. Such error causes substantial underestimation of relative risks and reduction of statistical power for detecting associations. On the basis of data from the Observing Protein and Energy Nutrition Study, we recommend the following approaches to deal with these problems. Regarding data analysis of cohort studies using food-frequency questionnaires, we recommend 1) using energy adjustment for relative risk estimation; 2) reporting estimates adjusted for measurement error along with the usual relative risk estimates, whenever possible (this requires data from a relevant, preferably internal, validation study in which participants report intakes using both the main instrument and a more detailed reference instrument such as a 24-hour recall or multiple-day food record); 3) performing statistical adjustment of relative risks, based on such validation data, if they exist, using univariate (only for energy-adjusted intakes such as densities or residuals) or multivariate regression calibration. We note that whereas unadjusted relative risk estimates are biased toward the null value, statistical significance tests of unadjusted relative risk estimates are approximately valid. Regarding study design, we recommend increasing the sample size to remedy loss of power; however, it is important to understand that this will often be an incomplete solution because the attenuated signal may be too small to distinguish from unmeasured confounding in the model relating disease to reported intake. Future work should be devoted to alleviating the problem of signal attenuation, possibly through the use of improved self-report instruments or by combining dietary biomarkers with self-report instruments.

Single stage reduction and stabilization of basilar invagination after failed prior fusion surgery in children with Down's syndrome.

PubMed

Hedequist, Daniel; Bekelis, Kimon; Emans, John; Proctor, Mark R

2010-02-15

We describe an innovative single-stage reduction and stabilization technique using modern cervical instrumentation. We hypothesis modern instrumentation has made more aggressive surgical corrections possible and has reduced the need for transoral resection of the odontoid and traction reduction in children with basilar invagination. Craniocervical junction abnormalities, including atlantoaxial instability and progressive basilar invagination, are relatively common phenomenon in Down's syndrome patients, and can lead to chronic progressive neurologic deficits, catastrophic injury, and death. This patient population also can be a difficult one in which to perform successful stabilization and fusion. We reviewed the records and films on 2 children with Down's syndrome and atlantoaxial instability who had undergone prior occipital-cervical fusion and then presented with symptomatic progressive basilar invagination due to atlantoaxial displacement. In both cases, the children had progressive symptoms of spinal cord and brain stem compression. Multiple approaches for surgical correction, including preoperative traction and transoral odontoid resection, were considered, but ultimately it was elected to perform a single stage posterior operation. In both patients, we performed fusion takedown, intraoperative realignment with reduction of the basilar invagination, and stabilization using modern occipito-cervical instrumentation. In both children, excellent cranio-cervical realignment was achieved; along with successful fusion and improvement in clinical symptoms. In this article we will discuss the clinical cases and review the background of craniocervical junction abnormalities in Down's syndrome patients. We hypothesis modern instrumentation has made more aggressive surgical corrections possible and has reduced the need for transoral resection of the odontoid and traction reduction in children with basilar invagination.

A survey of mass analyzers. [characteristics and features of various instruments and techniques

NASA Technical Reports Server (NTRS)

Moore, W. W., Jr.; Tashbar, P. W.

1973-01-01

With the increasing applications of mass spectrometry technology to diverse services areas, a need has developed for a consolidated survey of the essential characteristics and features of the various instruments and techniques. This report is one approach to satisfying this need. Information has been collected and consolidated into a format which includes for each approach: (1) a general technique description, (2) instrument features information, and (3) a summary of pertinent advantages and disadvantages. With this information, the potential mass spectrometer user should be able to more efficiently select the most appropriate instrument.

Quality of life in multiple myeloma: clinical validation of the Mexican-Spanish version of the QLQ-MY20 instrument.

PubMed

Espinoza-Zamora, José Ramiro; Portilla-Espinosa, César Miguel; Labardini-Méndez, Juan Rafael; Cervera, Eduardo; Niesvisky, Ruben; Oñate-Ocaña, Luis F

2015-06-01

Health-related quality of life (HRQL) has become an important outcome measurement in hematology. Our aim was to validate the quality of life questionnaire (QLQ)-MY20 instrument in patients with multiple myeloma (MM) in Mexico. The Mexican-Spanish versions of the QLQ-C30 and QLQ-MY20 instruments were applied to patients with MM at a cancer referral centre. Reliability and validity tests were performed. Test-retest was carried out in selected patients. Ninety-eight patients with MM were included in this study. Questionnaire compliance rates were high, and the instrument was well accepted; internal consistency tests demonstrated good convergent and divergent validity. Cronbach's α coefficients of seven of nine multi-item scales of the QLQ-C30 and of all three multi-item scales of the QLQ-MY20 instruments were >0.7 (range, 0.36-0.89). The scales of the QLQ-C30 and QLQ-MY20 instruments distinguished among clinically distinct groups of patients; 9 of 15 scales of the QLQ-C30 and all 4 scales of the QLQ-MY20 presented responsiveness after change over time. The Mexican-Spanish version of the QLQ-MY20 questionnaire is reliable and valid for the assessment of HRQL in patients with MM and can be used in clinical trials in the Mexican community.

The Calibration Target for the Mars 2020 SHERLOC Instrument: Multiple Science Roles for Future Manned and Unmanned Mars Exploration

NASA Technical Reports Server (NTRS)

Fries, M.; Bhartia, R.; Beegle, L.; Burton, A.; Ross, A.; Shahar, A.

2014-01-01

The Scanning Habitable Environments with Raman & Luminescence for Organics & Chemicals (SHERLOC) instrument is a deep ultraviolet (UV) Raman/fluorescence instrument selected as part of the Mars 2020 rover instrument suite. SHERLOC will be mounted on the rover arm and its primary role is to identify carbonaceous species in martian samples, which may be selected for inclusion into a returnable sample cache. The SHERLOC instrument will require the use of a calibration target, and by design, multiple science roles will be addressed in the design of the target. Samples of materials used in NASA Extravehicular Mobility unit (EMU, or "space suit") manufacture have been included in the target to serve as both solid polymer calibration targets for SHERLOC instrument function, as well as for testing the resiliency of those materials under martian ambient conditions. A martian meteorite will also be included in the target to serve as a well-characterized example of a martian rock that contains trace carbonaceous material. This rock will be the first rock that we know of that has completed a round trip between planets and will therefore serve an EPO role to attract public attention to science and planetary exploration. The SHERLOC calibration target will address a wide range of NASA goals to include basic science of interest to both the Science Mission Directorate (SMD) and Human Exploration and Operations Mission Directorate (HEOMD).

An instrumented glove for grasp specification in virtual-reality-based point-and-direct telerobotics.

PubMed

Yun, M H; Cannon, D; Freivalds, A; Thomas, G

1997-10-01

Hand posture and force, which define aspects of the way an object is grasped, are features of robotic manipulation. A means for specifying these grasping "flavors" has been developed that uses an instrumented glove equipped with joint and force sensors. The new grasp specification system will be used at the Pennsylvania State University (Penn State) in a Virtual Reality based Point-and-Direct (VR-PAD) robotics implementation. Here, an operator gives directives to a robot in the same natural way that human may direct another. Phrases such as "put that there" cause the robot to define a grasping strategy and motion strategy to complete the task on its own. In the VR-PAD concept, pointing is done using virtual tools such that an operator can appear to graphically grasp real items in live video. Rather than requiring full duplication of forces and kinesthetic movement throughout a task as is required in manual telemanipulation, hand posture and force are now specified only once. The grasp parameters then become object flavors. The robot maintains the specified force and hand posture flavors for an object throughout the task in handling the real workpiece or item of interest. In the Computer integrated Manufacturing (CIM) Laboratory at Penn State, hand posture and force data were collected for manipulating bricks and other items that require varying amounts of force at multiple pressure points. The feasibility of measuring desired grasp characteristics was demonstrated for a modified Cyberglove impregnated with Force-Sensitive Resistor (FSR) (pressure sensors in the fingertips. A joint/force model relating the parameters of finger articulation and pressure to various lifting tasks was validated for the instrumented "wired" glove. Operators using such a modified glove may ultimately be able to configure robot grasping tasks in environments involving hazardous waste remediation, flexible manufacturing, space operations and other flexible robotics applications. In each case, the VR-PAD approach will finesse the computational and delay problems of real-time multiple-degree-of-freedom force feedback telemanipulation.

Human Factors Design Principles for Instrument Approach Procedure Charts Volume I - Readability

DOT National Transportation Integrated Search

1992-08-01

This Handbook is the first of a series of handbooks which address thie issue of : Instrument Approach Procedure (IAP) chart improvement in design, The intent is : twofold: to review relevant literature that might be applicable to improving the : pres...

Key Cognitive Issues in the Design of Electronic Displays of Instrument Approach Procedure Charts

DOT National Transportation Integrated Search

1993-11-01

This report provides a general introduction to the field of cognitive psychology and the application of well researched cognitive issues to the design of electronic instrument approach procedures (EIAP) displays. It presents 46 cognitive issues and 1...

IFR Approval of Differential Global Positioning System (DGPS) Special Category I Instrument Approaches Using Private Ground Facilities

DOT National Transportation Integrated Search

1994-08-19

This order establishes interim procedures to approve special instrument approach : operations using privately owned DGPS installations at U.S. and foreign airports/ : runways. It identifies specific criteria, not presently found in existing : standar...

76 FR 59502 - Establishment of Class E Airspace; Gordonsville, VA

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

... at Gordonsville, VA, to accommodate the new Standard Instrument Approach Procedures serving Gordonsville Municipal Airport. This action enhances the safety and airspace management of Instrument Flight... approach procedures developed for Gordonsville Municipal Airport. This action is necessary for the safety...

78 FR 67295 - Amendment of Class E Airspace; Washington, KS

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

... Airport has made reconfiguration necessary for standard instrument approach procedures and for the safety and management of Instrument Flight Rule (IFR) operations at the airport. Geographic coordinates are... approach procedures at Washington County Memorial Airport, Washington, KS. Airspace configuration is...

14 CFR 170.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (i.e., ATCT) divided by the discounted life cycle costs. Ceiling means the vertical distance between... landing system (ILS) means an instrument landing system whereby the pilot guides his approach to a runway... ground can be fed into the automatic pilot for automatically controlled approaches. Instrument...

Multi-Population Invariance with Dichotomous Measures: Combining Multi-Group and MIMIC Methodologies in Evaluating the General Aptitude Test in the Arabic Language

ERIC Educational Resources Information Center

Sideridis, Georgios D.; Tsaousis, Ioannis; Al-harbi, Khaleel A.

2015-01-01

The purpose of the present study was to extend the model of measurement invariance by simultaneously estimating invariance across multiple populations in the dichotomous instrument case using multi-group confirmatory factor analytic and multiple indicator multiple causes (MIMIC) methodologies. Using the Arabic version of the General Aptitude Test…

INTEGRATED MONITORING HARDWARE DEVELOPMENTS AT LOS ALAMOS

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. PARKER; J. HALBIG; ET AL

1999-09-01

The hardware of the integrated monitoring system supports a family of instruments having a common internal architecture and firmware. Instruments can be easily configured from application-specific personality boards combined with common master-processor and high- and low-voltage power supply boards, and basic operating firmware. The instruments are designed to function autonomously to survive power and communication outages and to adapt to changing conditions. The personality boards allow measurement of gross gammas and neutrons, neutron coincidence and multiplicity, and gamma spectra. In addition, the Intelligent Local Node (ILON) provides a moderate-bandwidth network to tie together instruments, sensors, and computers.

Normal incidence x-ray mirror for chemical microanalysis

DOEpatents

Carr, M.J.; Romig, A.D. Jr.

1987-08-05

An x-ray mirror for both electron column instruments and micro x-ray fluorescence instruments for making chemical, microanalysis comprises a non-planar mirror having, for example, a spherical reflecting surface for x-rays comprised of a predetermined number of alternating layers of high atomic number material and low atomic number material contiguously formed on a substrate and whose layers have a thickness which is a multiple of the wavelength being reflected. For electron column instruments, the wavelengths of interest lie above 1.5nm, while for x-ray fluorescence instruments, the range of interest is below 0.2nm. 4 figs.

Dust Observations by Faraday Cups Onboard Spektr-R

NASA Astrophysics Data System (ADS)

Pavlu, J.; Kociscak, S.; Safrankova, J.; Nemecek, Z.; Prech, L.

2017-12-01

Dust of both interstellar and interplanetary origins was reported in many in-situ experiments devoted to dust detection during past tens of years. Recently, a number of reports employed unintended devices to observe dust (Voyager, Cassini, STEREO …). Most of such observations is based on impact ionization occurring when hypervelocity grains hit a surface being vaporized together with a portion of the surface material. The thermal ionization generates a plasma plume and the dust detection is based on collection of plasma particles by, e.g., antennas. In this contribution, we apply a similar approach to dust impact detection using the multi Faraday cup instrument (BMSW) onboard the Spektr-R spacecraft. It is orbiting the Earth along the highly elliptical trajectory with perigee of 2 and apogee of 50 Re. The BMSW instrument consists of 6 Faraday cups measuring local environmental properties with a rate as high as 30 Hz, i.e., high enough to detect aforementioned plasma plumes. The advantages of the multiple Faraday cup instrument include an easy recognition of dust impacts among plasma disturbances/solitons — dust grain impact can be detected only by one Faraday cup at a given time. We analyze Faraday cup waveforms applying simple criteria on impact spike shape and find a number of dust impact candidates. Based on this experience, we suggest a modification of future devices with a similar detection system.

Assessment of apically extruded debris produced by the single-file ProTaper F2 technique under reciprocating movement.

PubMed

De-Deus, Gustavo; Brandão, Maria Claudia; Barino, Bianca; Di Giorgi, Karina; Fidel, Rivail Antonio Sergio; Luna, Aderval Severino

2010-09-01

This study was designed to quantitatively evaluate the amount of dentin debris extruded from the apical foramen by comparing the conventional sequence of the ProTaper Universal nickel-titanium (NiTi) files with the single-file ProTaper F2 technique. Thirty mesial roots of lower molars were selected, and the use of different instrumentation techniques resulted in 3 groups (n=10 each). In G1, a crown-down hand-file technique was used, and in G2 conventional ProTaper Universal technique was used. In G3, ProTaper F2 file was used in a reciprocating motion. The apical finish preparation was equivalent to ISO size 25. An apparatus was used to evaluate the apically extruded debris. Statistical analysis was performed using 1-way analysis of variance and Tukey multiple comparisons. No significant difference was found in the amount of the debris extruded between the conventional sequence of the ProTaper Universal NiTi files and the single-file ProTaper F2 technique (P>.05). In contrast, the hand instrumentation group extruded significantly more debris than both NiTi groups (P<.05). The present results yielded favorable input for the F2 single-file technique in terms of apically extruded debris, inasmuch as it is the most simple and cost-effective instrumentation approach. Copyright (c) 2010 Mosby, Inc. All rights reserved.

A Customizable Flow Injection System for Automated, High Throughput, and Time Sensitive Ion Mobility Spectrometry and Mass Spectrometry Measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orton, Daniel J.; Tfaily, Malak M.; Moore, Ronald J.

To better understand disease conditions and environmental perturbations, multi-omic studies (i.e. proteomic, lipidomic, metabolomic, etc. analyses) are vastly increasing in popularity. In a multi-omic study, a single sample is typically extracted in multiple ways and numerous analyses are performed using different instruments. Thus, one sample becomes many analyses, making high throughput and reproducible evaluations a necessity. One way to address the numerous samples and varying instrumental conditions is to utilize a flow injection analysis (FIA) system for rapid sample injection. While some FIA systems have been created to address these challenges, many have limitations such as high consumable costs, lowmore » pressure capabilities, limited pressure monitoring and fixed flow rates. To address these limitations, we created an automated, customizable FIA system capable of operating at diverse flow rates (~50 nL/min to 500 µL/min) to accommodate low- and high-flow instrument sources. This system can also operate at varying analytical throughputs from 24 to 1200 samples per day to enable different MS analysis approaches. Applications ranging from native protein analyses to molecular library construction were performed using the FIA system. The results from these studies showed a highly robust platform, providing consistent performance over many days without carryover as long as washing buffers specific to each molecular analysis were utilized.« less

Return to work after severe multiple injuries: a multidimensional approach on status 1 and 2 years postinjury.

PubMed

Soberg, Helene Lundgaard; Finset, Arnstein; Bautz-Holter, Erik; Sandvik, Leiv; Roise, Olav

2007-02-01

The assessment of factors associated with return to work (RTW) after multiple trauma is important in trauma research. Goals in rehabilitation should comprise RTW. The purpose of this study was to examine the RTW rate and which factors predicted RTW for patients with severe multiple injuries using a prospective cohort design. In all, 100 patients with a New Injury Severity Score (NISS) >15, aged 18 to 67 years and admitted to a trauma referral center, were included starting January 2002 through June 2003. Outcomes were assessed 6 weeks after discharge and 1 and 2 years postinjury. Instruments were the Brief Approach/Avoidance Coping Questionnaire, Multidimensional Health Locus of Control, Short Form-36, the World Health Organization Disability Assessment Schedule II, and a cognitive function scale (COG). Mean age was 34.5 years (SD 13.5), 83% were male, and 66% were blue-collar workers. Mean NISS was 35.1 (SD 12.7). At 1 year, 28% achieved complete RTW, 43% at 2 years. Mean time back to work was 12.8 months (SD 5.9). Differences between the RTW and not complete RTW (NRTW) groups concerned personal and demographic variables, and physical and psychosocial functioning. Survival analysis showed that risk factors for NRTW were lower education, length of stay in hospital/rehabilitation >20 weeks, and low social functioning shortly after the return home. The majority of the patients had not completely returned to work 2 years postinjury. Demographic and injury related factors and social functioning were significant predictors of RTW status.

Characterization of Harmonic Signal Acquisition with Parallel Dipole and Multipole Detectors

NASA Astrophysics Data System (ADS)

Park, Sung-Gun; Anderson, Gordon A.; Bruce, James E.

2018-04-01

Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) is a powerful instrument for the study of complex biological samples due to its high resolution and mass measurement accuracy. However, the relatively long signal acquisition periods needed to achieve high resolution can serve to limit applications of FTICR-MS. The use of multiple pairs of detector electrodes enables detection of harmonic frequencies present at integer multiples of the fundamental cyclotron frequency, and the obtained resolving power for a given acquisition period increases linearly with the order of harmonic signal. However, harmonic signal detection also increases spectral complexity and presents challenges for interpretation. In the present work, ICR cells with independent dipole and harmonic detection electrodes and preamplifiers are demonstrated. A benefit of this approach is the ability to independently acquire fundamental and multiple harmonic signals in parallel using the same ions under identical conditions, enabling direct comparison of achieved performance as parameters are varied. Spectra from harmonic signals showed generally higher resolving power than spectra acquired with fundamental signals and equal signal duration. In addition, the maximum observed signal to noise (S/N) ratio from harmonic signals exceeded that of fundamental signals by 50 to 100%. Finally, parallel detection of fundamental and harmonic signals enables deconvolution of overlapping harmonic signals since observed fundamental frequencies can be used to unambiguously calculate all possible harmonic frequencies. Thus, the present application of parallel fundamental and harmonic signal acquisition offers a general approach to improve utilization of harmonic signals to yield high-resolution spectra with decreased acquisition time. [Figure not available: see fulltext.

Reducing maternal anxiety and stress in pregnancy: what is the best approach?

PubMed

Fontein-Kuipers, Yvonne

2015-04-01

To briefly review results of the latest research on approaching antenatal maternal anxiety and stress as distinct constructs within a broad spectrum of maternal antenatal distress and the preventive strategic role of the maternal healthcare practitioner. Maternal antenatal anxiety and stress are predominant contributors to short and long-term ill health and reduction of these psychological constructs is evident. Anxiety and stress belong to a broad spectrum of different psychological constructs. Various psychometric instruments are available to measure different individual constructs of antenatal maternal emotional health. Using multiple measures within antenatal care would imply a one-dimensional approach of individual constructs, resulting in inadequate management of care and inefficient use of knowledge and skills of maternity healthcare practitioners. A case-finding approach with slight emphasis on antenatal anxiety with subsequent selection of at-risk women and women suffering from maternal distress are shown to be effective preventive strategies and are consistent with the update of the National Institute for Health and Care Excellence guideline 'Antenatal and postnatal mental health'. Educational aspects of this approach are related to screening and assessment. A shift in perception and attitude towards a broad theoretical and practical approach of antenatal maternal mental health and well-being is required. Case finding with subsequent selective and indicated preventive strategies during pregnancy would conform to this approach and are evidence based.

Protein Analysis Using Real-Time PCR Instrumentation: Incorporation in an Integrated, Inquiry-Based Project

ERIC Educational Resources Information Center

Southard, Jonathan N.

2014-01-01

Instrumentation for real-time PCR is used primarily for amplification and quantitation of nucleic acids. The capability to measure fluorescence while controlling temperature in multiple samples can also be applied to the analysis of proteins. Conformational stability and changes in stability due to ligand binding are easily assessed. Protein…

A Study of Students' Readiness to Learn Calculus

ERIC Educational Resources Information Center

Carlson, Marilyn P.; Madison, Bernard; West, Richard D.

2015-01-01

The Calculus Concept Readiness (CCR) instrument assesses foundational understandings and reasoning abilities that have been documented to be essential for learning calculus. The CCR Taxonomy describes the understandings and reasoning abilities assessed by CCR. The CCR is a 25-item multiple-choice instrument that can be used as a placement test for…

THE DEVELOPMENT OF AN INSTRUMENT FOR MEASURING THE UNDERSTANDING OF PROFIT-MAXIMIZING PRINCIPLES.

ERIC Educational Resources Information Center

MCCORMICK, FLOYD G.

THE PURPOSE OF THE STUDY WAS TO DEVELOP AN INSTRUMENT FOR MEASURING PROFIT-MAXIMIZING PRINCIPLES IN FARM MANAGEMENT WITH IMPLICATIONS FOR VOCATIONAL AGRICULTURE. PRINCIPLES WERE IDENTIFIED FROM LITERATURE SELECTED BY AGRICULTURAL ECONOMISTS. FORTY-FIVE MULTIPLE-CHOICE QUESTIONS WERE REFINED ON THE BASIS OF RESULTS OF THREE PRETESTS AND…

Informing Teacher Education through the Use of Multiple Classroom Observation Instruments

ERIC Educational Resources Information Center

Weber, Nancy Dubinski; Waxman, Hersh C.; Brown, Danielle B.; Kelly, Larry J.

2016-01-01

The purpose of the present study is to examine how first-year secondary teaching interns' classrooms compare to those of more experienced teachers. Through the simultaneous use of three unique observation instruments, the authors addressed the following research questions: (a) How do first-year secondary teachers' classroom behaviors compare to…

Development and Initial Testing of a Structured Clinical Observation Tool to Assess Pharmacotherapy Competence

ERIC Educational Resources Information Center

Young, John Q.; Lieu, Sandra; O'Sullivan, Patricia; Tong, Lowell

2011-01-01

Objective: The authors developed and tested the feasibility and utility of a new direct-observation instrument to assess trainee performance of a medication management session. Methods: The Psychopharmacotherapy-Structured Clinical Observation (P-SCO) instrument was developed based on multiple sources of expertise and then implemented in 4…

Invariance in the Factor Structure of Translated Instruments: Multiple Group Confirmatory Factor Analysis and MIMIC Models

ERIC Educational Resources Information Center

Ayyad, Fatma

2011-01-01

When factorial invariance is established across translated forms of an instrument, the meaning of the construct crosses language/cultures. If factorial invariance is not established, score discrepancies may represent true language group differences or faulty translation. This study seeks to disentangle this by determining whether…

Identifying a Power Elite in a Microcosmic Adult Community.

ERIC Educational Resources Information Center

Roberts, William B.

The study presents the results of testing an original obersvation instrument designed to identify a power elite in multiple sessions of two eight-member adult discussion groups. Two questions guided the development of the study: (1) Can a power elite be identified in participation training groups? (2) Can an effective observation instrument with…

Researcher as Instrument: Understanding "Shifting" Findings in Constructivist Research

ERIC Educational Resources Information Center

Stewart, Dafina Lazarus

2010-01-01

Two studies investigating the meaning and articulation of multiple identities among Black college students revealed shifts in the findings from the 2001 study to the 2005 study. This theoretical review explores the role of the researcher as instrument within the constructivist research paradigm as a possible explanation for some of these apparent…

Assessing Situated Reading Motivations across Content Areas: A Dynamic Literacy Motivation Instrument

ERIC Educational Resources Information Center

Neugebauer, Sabina Rak

2017-01-01

While educators and researchers agree on the crucial role of literacy motivation for performance, research on methods for accurately assessing adolescent reading motivation is still uncommon. The most used reading motivation instruments do not attend to the multiple content areas in which adolescents read. The present study examines a new…

Flight investigation of manual and automatic VTOL decelerating instrument approaches and landings

NASA Technical Reports Server (NTRS)

Kelly, J. R.; Niessen, F. R.; Thibodeaux, J. J.; Yenni, K. R.; Garren, J. F., Jr.

1974-01-01

A flight investigation was undertaken to study the problems associated with manual and automatic control of steep, decelerating instrument approaches and landings under simulated instrument conditions. The study was conducted with a research helicopter equipped with a three-cue flight-director indicator. The scope of the investigation included variations in the flight-director control laws, glide-path angle, deceleration profile, and control response characteristics. Investigation of the automatic-control problem resulted in the first automated approach and landing to a predetermined spot ever accomplished with a helicopter. Although well-controlled approaches and landings could be performed manually with the flight-director concept, pilot comments indicated the need for a better display which would more effectively integrate command and situation information.

A low-cost inertial smoothing system for landing approach guidance

NASA Technical Reports Server (NTRS)

Niessen, F. R.

1973-01-01

Accurate position and velocity information with low noise content for instrument approaches and landings is required for both control and display applications. In a current VTOL automatic instrument approach and landing research program, radar-derived landing guidance position reference signals, which are noisy, have been mixed with acceleration information derived from low-cost onboard sensors to provide high-quality position and velocity information. An in-flight comparison of signal quality and accuracy has shown good agreement between the low-cost inertial smoothing system and an aided inertial navigation system. Furthermore, the low-cost inertial smoothing system has been proven to be satisfactory in control and display system applications for both automatic and pilot-in-the-loop instrument approaches and landings.

The Instrumental Model

ERIC Educational Resources Information Center

Yeates, Devin Rodney

2011-01-01

The goal of this dissertation is to enable better predictive models by engaging raw experimental data through the Instrumental Model. The Instrumental Model captures the protocols and procedures of experimental data analysis. The approach is formalized by encoding the Instrumental Model in an XML record. Decoupling the raw experimental data from…

Toxicogenomics in regulatory ecotoxicology

USGS Publications Warehouse

Ankley, Gerald T.; Daston, George P.; Degitz, Sigmund J.; Denslow, Nancy D.; Hoke, Robert A.; Kennedy, Sean W.; Miracle, Ann L.; Perkins, Edward J.; Snape, Jason; Tillitt, Donald E.; Tyler, Charles R.; Versteeg, Donald

2006-01-01

Recently, we have witnessed an explosion of different genomic approaches that, through a combination of advanced biological, instrumental, and bioinformatic techniques, can yield a previously unparalleled amount of data concerning the molecular and biochemical status of organisms. Fueled partially by large, well-publicized efforts such as the Human Genome Project, genomic research has become a rapidly growing topical area in multiple biological disciplines. Since 1999, when the term “toxicogenomics” was coined to describe the application of genomics to toxicology (1), a rapid increase in publications on the topic has occurred (Figure 1). The potential utility of toxicogenomics in toxicological research and regulatory activities has been the subject of scientific discussions and, as with any new technology, has evoked a wide range of opinion (2–6).

Optimized Biasing of Pump Laser Diodes in a Highly Reliable Metrology Source for Long-Duration Space Missions

NASA Technical Reports Server (NTRS)

Poberezhskiy, Ilya Y; Chang, Daniel H.; Erlig, Herman

2011-01-01

Optical metrology system reliability during a prolonged space mission is often limited by the reliability of pump laser diodes. We developed a metrology laser pump module architecture that meets NASA SIM Lite instrument optical power and reliability requirements by combining the outputs of multiple single-mode pump diodes in a low-loss, high port count fiber coupler. We describe Monte-Carlo simulations used to calculate the reliability of the laser pump module and introduce a combined laser farm aging parameter that serves as a load-sharing optimization metric. Employing these tools, we select pump module architecture, operating conditions, biasing approach and perform parameter sensitivity studies to investigate the robustness of the obtained solution.

Cryotherapy for prostate cancer.

PubMed

Bermejo, Carlos E; Pisters, Louis L

2003-06-01

Cryotherapy, or the use of freezing, is a long-established method of tumor cell destruction. Although in the past cryotherapy was widely used as a local treatment for prostate cancer, this technique was abandoned not due to lack of efficacy but because the complication rate was unacceptably high. However, there has been a re-emergence in the popularity of cryotherapy for the treatment of localized prostate cancer due to improvements in instrumentation, tumor localization and treatment delivery. Using transrectal ultrasound imaging, prostate cryotherapy is currently delivered with multiple probes via a percutaneous transperineal approach. The extent of freezing can be precisely controlled and monitored with thermocouples and tissue destruction is monitored with real-time visualization of the prostate and surrounding structures. The role of cryotherapy in localized prostate cancer is reviewed.

Diagonalizing controller for a superconducting six-axis accelerometer

NASA Astrophysics Data System (ADS)

Bachrach, B.; Canavan, E. R.; Levine, W. S.

A relatively simple MIMO (multiple input, multiple output) controller which converts an instrument with a nondiagonally dominant transfer function matrix into a strongly diagonally dominant device is developed. The instrument, which uses inductance bridges to sense the position of a magnetically levitated superconducting mass, has very lightly damped resonances and fairly strong cross coupling. By taking advantage of the particular structure of the instrument's transfer function matrix, it is possible to develop a relatively simple controller which achieves the desired decoupling. This controller consists of two parts. The first part cancels the nondiagonal terms of the open-loop transfer function matrix, while the second part is simply a set of SISO (single input, single output) controllers. The stability of the closed-loop system is studied using Rosenbrock's INA (inverse Nyguist array) technique, which produces a simple set of conditions guaranteeing stability. Simulation of the closed-loop system indicates that it should easily achieve its performance goals.

78 FR 16400 - Amendment of Class E Airspace; Morrisville, VT

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-15

... Standard Instrument Approach Procedures have been developed at Morrisville-Stowe State Airport. This action enhances the safety and management of Instrument Flight Rules (IFR) operations at the airport. DATES... Approach Procedures developed for Morrisville-Stowe State Airport . The Morrisville-Stowe NDB has been...

78 FR 67294 - Amendment of Class E Airspace; Wadena, MN

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

... Approach Procedures at Wadena Municipal Airport. The airport's geographic coordinates are also adjusted. This action enhances the safety and management of Instrument Flight Rule (IFR) operations at the... extending upward from 700 feet above the surface to accommodate new standard instrument approach procedures...

76 FR 14801 - Establishment of Class E Airspace; Colebrook, NH

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... Standard Instrument Approach Procedure (SIAP) serving the Upper Connecticut Valley Hospital Heliport. This action enhances the safety and airspace management of Instrument Flight Rules (IFR) operations within the... approach procedures developed for Upper Connecticut Valley Hospital Heliport. This action is necessary for...

77 FR 66068 - Amendment of Class E Airspace; Breckenridge, TX

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-01

...) Standard Instrument Approach Procedures at Stephens County Airport. The airport's geographic coordinates... controlled airspace at Stephens County Airport (77 FR 50648) Docket No. FAA-2012-0653. Interested parties... instrument approach procedures at Stephens County Airport, Breckenridge, TX. This action is necessary for the...

77 FR 55690 - Amendment of Class E Airspace; Dillon, MT

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

... aircraft using new Area Navigation (RNAV) Global positioning System (GPS) standard instrument approach... Airport, Dillon, MT, to accommodate IFR aircraft executing new RNAV (GPS) standard instrument approach.... Steven L. Vale, Acting Manager, Operations Support Group, Western Service Center. [FR Doc. 2012-22269...

76 FR 21830 - Proposed Amendment of Class E Airspace; Harrisonville, MO

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-19

... necessary to accommodate new Standard Instrument Approach Procedures (SIAP) at Lawrence Smith Memorial... accommodate new standard instrument approach procedures at Lawrence Smith Memorial Airport, Harrisonville, MO... authority as it would amend controlled airspace at Lawrence Smith Memorial Airport, Harrisonville, MO. List...

The Effect of Instrument Approach Procedure Chart Design on Pilot Search Speed and Response Accuracy - Flight Test Results

DOT National Transportation Integrated Search

1995-06-01

Instrument approach procedure (IAP) charts can be densely packed with information. This high information density can : make information difficult to find, particularly in a poorly lit cockpit during turbulence. The Voipe Center's Cockpit : Hunan Fact...