Quantitative perceptual differences among over-the-counter vaginal products using a standardized methodology: implications for microbicide development.

PubMed

Mahan, Ellen D; Morrow, Kathleen M; Hayes, John E

2011-08-01

Increasing prevalence of HIV infection among women worldwide has motivated the development of female-initiated prevention methods, including gel-based microbicides. User acceptability is vital for microbicide success; however, varying cultural vaginal practices indicate multiple formulations must be developed to appeal to different populations. Perceptual attributes of microbicides have been identified as primary drivers of acceptability; however, previous studies do not allow for direct comparison of these qualities between multiple formulations. Six vaginal products were analyzed ex vivo using descriptive analysis. Perceptual attributes of samples were identified by trained participants (n=10) and rated quantitatively using scales based on a panel-developed lexicon. Data were analyzed using two-way ANOVAs for each attribute; product differences were assessed via Tukey's honestly significant difference test. Significant differences were found between products for multiple attributes. Patterns were also seen for attributes across intended product usage (i.e., contraceptive, moisturizer or lubricant). For example, Options© Gynol II® (Caldwell Consumer Health, LLC) was significantly stickier and grainier than other products. Descriptive analysis, a quantitative approach that is based on consensus lexicon usage among participants, successfully quantified perceptual differences among vaginal products. Since perceptual attributes of products can be directly compared quantitatively, this study represents a novel approach that could be used to inform rational design of microbicides. Copyright © 2011 Elsevier Inc. All rights reserved.

Multiple Aspects of High School Students' Strategic Processing on Reading Outcomes: The Role of Quantity, Quality, and Conjunctive Strategy Use

ERIC Educational Resources Information Center

Parkinson, Meghan M.; Dinsmore, Daniel L.

2018-01-01

Background: While the literature on strategy use is relatively mature, measures of strategy use overwhelmingly measure only one aspect of that use, frequency, when relating that strategy use to performance outcomes. While this might be one important attribute of strategy use, there is increasing evidence that quality and conditional use of…

Leadership Values, Trust and Negative Capability: Managing the Uncertainties of Future English Higher Education

ERIC Educational Resources Information Center

Jameson, Jill

2012-01-01

The complex leadership attribute of "negative capability" in managing uncertainty and engendering trust may be amongst the qualities enabling institutions to cope with multiple recent government policy challenges affecting English higher education, including significant increases in student fees. Research findings are reported on changes…

Optimal Wavelengths Selection Using Hierarchical Evolutionary Algorithm for Prediction of Firmness and Soluble Solids Content in Apples

USDA-ARS?s Scientific Manuscript database

Hyperspectral scattering is a promising technique for rapid and noninvasive measurement of multiple quality attributes of apple fruit. A hierarchical evolutionary algorithm (HEA) approach, in combination with subspace decomposition and partial least squares (PLS) regression, was proposed to select o...

Database of Ground-Water Levels in the Vicinity of Rainier Mesa, Nevada Test Site, Nye County, Nevada, 1957-2005

USGS Publications Warehouse

Fenelon, Joseph M.

2006-01-01

More than 1,200 water-level measurements from 1957 to 2005 in the Rainier Mesa area of the Nevada Test Site were quality assured and analyzed. Water levels were measured from 50 discrete intervals within 18 boreholes and from 4 tunnel sites. An interpretive database was constructed that describes water-level conditions for each water level measured in the Rainier Mesa area. Multiple attributes were assigned to each water-level measurement in the database to describe the hydrologic conditions at the time of measurement. General quality, temporal variability, regional significance, and hydrologic conditions are attributed for each water-level measurement. The database also includes hydrograph narratives that describe the water-level history of each well.

A tribal abstraction network for SNOMED CT target hierarchies without attribute relationships.

PubMed

Ochs, Christopher; Geller, James; Perl, Yehoshua; Chen, Yan; Agrawal, Ankur; Case, James T; Hripcsak, George

2015-05-01

Large and complex terminologies, such as Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT), are prone to errors and inconsistencies. Abstraction networks are compact summarizations of the content and structure of a terminology. Abstraction networks have been shown to support terminology quality assurance. In this paper, we introduce an abstraction network derivation methodology which can be applied to SNOMED CT target hierarchies whose classes are defined using only hierarchical relationships (ie, without attribute relationships) and similar description-logic-based terminologies. We introduce the tribal abstraction network (TAN), based on the notion of a tribe-a subhierarchy rooted at a child of a hierarchy root, assuming only the existence of concepts with multiple parents. The TAN summarizes a hierarchy that does not have attribute relationships using sets of concepts, called tribal units that belong to exactly the same multiple tribes. Tribal units are further divided into refined tribal units which contain closely related concepts. A quality assurance methodology that utilizes TAN summarizations is introduced. A TAN is derived for the Observable entity hierarchy of SNOMED CT, summarizing its content. A TAN-based quality assurance review of the concepts of the hierarchy is performed, and erroneous concepts are shown to appear more frequently in large refined tribal units than in small refined tribal units. Furthermore, more erroneous concepts appear in large refined tribal units of more tribes than of fewer tribes. In this paper we introduce the TAN for summarizing SNOMED CT target hierarchies. A TAN was derived for the Observable entity hierarchy of SNOMED CT. A quality assurance methodology utilizing the TAN was introduced and demonstrated. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Summary Article: IEA HPP Annex 36: Quality Installation / Quality Maintenance Sensitivity Studies

DOE PAGES

Hourahan, Glenn; Domanski, Piotr; Baxter, Van D.

2015-01-30

The outcome from this Annex activity clearly identifies that poorly designed, installed, and/or maintained heat pumps operate inefficiently and waste considerable energy compared to their as-designed potential. Additionally, it is clear that small faults for a given field-observed practice are significant, that some attribute deviations (in various equipment applications and geographical locations) have a larger impact than others, and that multiple faults or deviations have a cumulative impact on heat pump performance.

Investigating Mixture Interactions of Astringent Stimuli Using the Isobole Approach

PubMed Central

Fleming, Erin E.; Ziegler, Gregory R.

2016-01-01

Abstract Astringents (alum, malic acid, tannic acid) representing 3 broad classes (multivalent salts, organic acids, and polyphenols) were characterized alone, and as 2- and 3-component mixtures using isoboles. In experiment 1, participants rated 7 attributes (“astringency,” the sub-qualities “drying,” “roughing,” and “puckering,” and the side tastes “bitterness,” “sourness,” and “sweetness”) using direct scaling. Quality specific power functions were calculated for each stimulus. In experiment 2, the same participants characterized 2- and 3-component mixtures. Multiple factor analysis (MFA) and hierarchical clustering on attribute ratings across stimuli indicate “astringency” is highly related to “bitterness” as well as “puckering,” and the subqualities “drying” and “roughing” are somewhat redundant. Moreover, power functions were used to calculate indices of interaction (I) for each attribute/mixture combination. For “astringency,” there was evidence of antagonism, regardless of the type of mixture. Conversely, for subqualities, the pattern of interaction depended on the mixture type. Alum/tannic acid and tannic acid/malic acid mixtures showed evidence of synergy for “drying” and “roughing”; alum/malic acid mixtures showed evidence of antagonism for “drying,” “roughing,” and “puckering.” Collectively, these data clarify some semantic ambiguity regarding astringency and its subqualities, as well as the nature of interactions of among different types of astringents. Present data are not inconsistent with the idea that astringency arises from multiple mechanisms, although it remains to be determined whether the synergy observed here might reflect simultaneous activation of these multiple mechanisms. PMID:27252355

[Application of quality by design in granulation process for ginkgo leaf tablet (Ⅱ)： identification of critical quality attributes].

PubMed

Xu, Bing; Cui, Xiang-Long; Yang, Chan; Wang, Xin; Shi, Xin-Yuan; Qiao, Yan-Jiang

2017-03-01

Quality by design (QbD) highlights the concept of "begin with the end", which means to thoroughly understand the target product quality first, and then guide pharmaceutical process development and quality control throughout the whole manufacturing process. In this paper, the Ginkgo biloba granules intermediates were taken as the research object, and the requirements of the tensile strength of tablets were treated as the goals to establish the methods for identification of granules' critical quality attributes (CQAs) and establishment of CQAs' limits. Firstly, the orthogonal partial least square (OPLS) model was adopted to build the relationship between the micromeritic properties of 29 batches of granules and the tensile strength of ginkgo leaf tablets, and thereby the potential critical quality attributes (pCQAs) were screened by variable importance in the projection (VIP) indexes. Then, a series of OPLS models were rebuilt by reducing pCQAs variables one by one in view of the rule of VIP values from low to high in sequence. The model performance results demonstrated that calibration and predictive performance of the model had no decreasing trend after variables reduction. In consideration of the results from variables selection as well as the collinearity test and testability of the pCQAs, the median particle size (D₅₀) and the bulk density (Da) were identified as critical quality attributes (CQAs). The design space of CQAs was developed based on a multiple linear regression model established between the CQAs (D₅₀ and Da) and the tensile strength. The control constraints of the CQAs were determined as 170 μm< D₅₀<500 μm and 0.30 g•cm⁻³

An A+ Teaching Model for Serving K-12 Gifted Students in a Technologically Rich Environment

ERIC Educational Resources Information Center

Maynard, Brandi

2012-01-01

Experts in the field have had a difficult time finding a conclusive set of attributes of high-quality gifted teachers using collaborative technology. The purpose of this multiple, exploratory case study was to examine the views of selected educators regarding the teacher characteristics and technology most relevant to the development of shared…

Optimal design of compact and connected nature reserves for multiple species.

PubMed

Wang, Yicheng; Önal, Hayri

2016-04-01

When designing a conservation reserve system for multiple species, spatial attributes of the reserves must be taken into account at species level. The existing optimal reserve design literature considers either one spatial attribute or when multiple attributes are considered the analysis is restricted only to one species. We built a linear integer programing model that incorporates compactness and connectivity of the landscape reserved for multiple species. The model identifies multiple reserves that each serve a subset of target species with a specified coverage probability threshold to ensure the species' long-term survival in the reserve, and each target species is covered (protected) with another probability threshold at the reserve system level. We modeled compactness by minimizing the total distance between selected sites and central sites, and we modeled connectivity of a selected site to its designated central site by selecting at least one of its adjacent sites that has a nearer distance to the central site. We considered structural distance and functional distances that incorporated site quality between sites. We tested the model using randomly generated data on 2 species, one ground species that required structural connectivity and the other an avian species that required functional connectivity. We applied the model to 10 bird species listed as endangered by the state of Illinois (U.S.A.). Spatial coherence and selection cost of the reserves differed substantially depending on the weights assigned to these 2 criteria. The model can be used to design a reserve system for multiple species, especially species whose habitats are far apart in which case multiple disjunct but compact and connected reserves are advantageous. The model can be modified to increase or decrease the distance between reserves to reduce or promote population connectivity. © 2015 Society for Conservation Biology.

Privacy Protection on Multiple Sensitive Attributes

NASA Astrophysics Data System (ADS)

Li, Zhen; Ye, Xiaojun

In recent years, a privacy model called k-anonymity has gained popularity in the microdata releasing. As the microdata may contain multiple sensitive attributes about an individual, the protection of multiple sensitive attributes has become an important problem. Different from the existing models of single sensitive attribute, extra associations among multiple sensitive attributes should be invested. Two kinds of disclosure scenarios may happen because of logical associations. The Q&S Diversity is checked to prevent the foregoing disclosure risks, with an α Requirement definition used to ensure the diversity requirement. At last, a two-step greedy generalization algorithm is used to carry out the multiple sensitive attributes processing which deal with quasi-identifiers and sensitive attributes respectively. We reduce the overall distortion by the measure of Masking SA.

Application of principal component analysis (PCA) as a sensory assessment tool for fermented food products.

PubMed

Ghosh, Debasree; Chattopadhyay, Parimal

2012-06-01

The objective of the work was to use the method of quantitative descriptive analysis (QDA) to describe the sensory attributes of the fermented food products prepared with the incorporation of lactic cultures. Panellists were selected and trained to evaluate various attributes specially color and appearance, body texture, flavor, overall acceptability and acidity of the fermented food products like cow milk curd and soymilk curd, idli, sauerkraut and probiotic ice cream. Principal component analysis (PCA) identified the six significant principal components that accounted for more than 90% of the variance in the sensory attribute data. Overall product quality was modelled as a function of principal components using multiple least squares regression (R (2) = 0.8). The result from PCA was statistically analyzed by analysis of variance (ANOVA). These findings demonstrate the utility of quantitative descriptive analysis for identifying and measuring the fermented food product attributes that are important for consumer acceptability.

The role of body image psychological flexibility on the treatment of eating disorders in a residential facility.

PubMed

Bluett, E J; Lee, E B; Simone, M; Lockhart, G; Twohig, M P; Lensegrav-Benson, Tera; Quakenbush-Roberts, Benita

2016-12-01

The purpose of this study was to test whether pre-treatment levels of psychological flexibility would longitudinally predict quality of life and eating disorder risk in patients at a residential treatment facility for eating disorders. Data on body image psychological flexibility, quality of life, and eating disorder risk were collected from 63 adolescent and 50 adult, female, residential patients (N=113) diagnosed with an eating disorder. These same measures were again collected at post-treatment. Sequential multiple regression analyses were performed to test whether pre-treatment levels of psychological flexibility longitudinally predicted quality of life and eating disorder risk after controlling for age and baseline effects. Pre-treatment psychological flexibility significantly predicted post-treatment quality of life with approximately 19% of the variation being attributable to age and pre-treatment psychological flexibility. Pre-treatment psychological flexibility also significantly predicted post-treatment eating disorder risk with nearly 30% of the variation attributed to age and pre-treatment psychological flexibility. This study suggests that levels of psychological flexibility upon entering treatment for an eating disorder longitudinally predict eating disorder outcome and quality of life. Copyright © 2016 Elsevier Ltd. All rights reserved.

Identification and Prioritization of Important Attributes of Disease-Modifying Drugs in Decision Making among Patients with Multiple Sclerosis: A Nominal Group Technique and Best-Worst Scaling.

PubMed

Kremer, Ingrid E H; Evers, Silvia M A A; Jongen, Peter J; van der Weijden, Trudy; van de Kolk, Ilona; Hiligsmann, Mickaël

2016-01-01

Understanding the preferences of patients with multiple sclerosis (MS) for disease-modifying drugs and involving these patients in clinical decision making can improve the concordance between medical decisions and patient values and may, subsequently, improve adherence to disease-modifying drugs. This study aims first to identify which characteristics-or attributes-of disease-modifying drugs influence patients´ decisions about these treatments and second to quantify the attributes' relative importance among patients. First, three focus groups of relapsing-remitting MS patients were formed to compile a preliminary list of attributes using a nominal group technique. Based on this qualitative research, a survey with several choice tasks (best-worst scaling) was developed to prioritize attributes, asking a larger patient group to choose the most and least important attributes. The attributes' mean relative importance scores (RIS) were calculated. Nineteen patients reported 34 attributes during the focus groups and 185 patients evaluated the importance of the attributes in the survey. The effect on disease progression received the highest RIS (RIS = 9.64, 95% confidence interval: [9.48-9.81]), followed by quality of life (RIS = 9.21 [9.00-9.42]), relapse rate (RIS = 7.76 [7.39-8.13]), severity of side effects (RIS = 7.63 [7.33-7.94]) and relapse severity (RIS = 7.39 [7.06-7.73]). Subgroup analyses showed heterogeneity in preference of patients. For example, side effect-related attributes were statistically more important for patients who had no experience in using disease-modifying drugs compared to experienced patients (p < .001). This study shows that, on average, patients valued effectiveness and unwanted effects as most important. Clinicians should be aware of the average preferences but also that attributes of disease-modifying drugs are valued differently by different patients. Person-centred clinical decision making would be needed and requires eliciting individual preferences.

Simultaneous monitoring of oxidation, deamidation, isomerization, and glycosylation of monoclonal antibodies by liquid chromatography-mass spectrometry method with ultrafast tryptic digestion.

PubMed

Wang, Yi; Li, Xiaojuan; Liu, Yan-Hui; Richardson, Daisy; Li, Huijuan; Shameem, Mohammed; Yang, Xiaoyu

Monoclonal antibodies are subjected to a wide variety of post-translational modifications (PTMs) that cause structural heterogeneity. Characterization and control of these modifications or quality attributes are critical to ensure antibody quality and to define any potential effects on the ultimate safety and potency of antibody therapeutics. The biopharmaceutical industry currently uses numerous tools to analyze these quality attributes individually, which requires substantial time and resources. Here, we report a simple and ultrafast bottom-up liquid chromatography-mass spectrometry (uLC-MS) method with 5 min tryptic digestion to simultaneously analyze multiple modifications, including oxidation, deamidation, isomerization, glycation, glycosylation, and N-terminal pyro-glutamate formation, which can occur during antibody production in mammalian cell culture, during purification and/or on storage. Compared to commonly used preparation procedures, this uLC-MS method eliminates assay artifacts of falsely-increased Met oxidation, Asp isomerization, and Asn deamidation, a problem associated with long digestion times in conventional LC-MS methods. This simple, low artifact multi-attribute uLC-MS method can be used to quickly and accurately analyze samples at any stage of antibody drug development, in particular for clone and media selection during cell culture development.

A novel approach to support formulation design on twin screw wet granulation technology: Understanding the impact of overarching excipient properties on drug product quality attributes.

PubMed

Willecke, N; Szepes, A; Wunderlich, M; Remon, J P; Vervaet, C; De Beer, T

2018-04-21

The overall objective of this work is to understand how excipient characteristics influence the drug product quality attributes and process performance of a continuous twin screw wet granulation process. The knowledge gained in this study is intended to be used for Quality by Design (QbD)-based formulation design and formulation optimization. Three principal components which represent the overarching properties of 8 selected pharmaceutical fillers were used as factors, whereas factors 4 and 5 represented binder type and binder concentration in a design of experiments (DoE). The majority of process parameters were kept constant to minimize their influence on the granule and drug product quality. 27 DoE batches consisting of binary filler/binder mixtures were processed via continuous twin screw wet granulation followed by tablet compression. Multiple linear regression models were built providing understanding of the impact of filler and binder properties on granule and tablet quality attributes (i.e. 16 DoE responses). The impact of fillers on the granule and tablet responses was more dominant compared to the impact of binder type and concentration. The filler properties had a relevant effect on granule characteristics, such as particle size, friability and specific surface area. Binder type and concentration revealed a relevant influence on granule flowability and friability as well as on the compactability (required compression force during tableting to obtain target hardness). In order to evaluate the DoE models' validity, a verification of the DoE models was performed with new formulations (i.e. a new combination of filler, binder type and binder concentration) which were initially not included in the dataset used to build the DoE models. The combined PCA (principle component analysis)/DoE approach allowed to link the excipient properties with the drug product quality attributes. Copyright © 2018 Elsevier B.V. All rights reserved.

Patient satisfaction: focusing on "excellent".

PubMed

Otani, Koichiro; Waterman, Brian; Faulkner, Kelly M; Boslaugh, Sarah; Burroughs, Thomas E; Dunagan, W Claiborne

2009-01-01

In an emerging competitive market such as healthcare, managers should focus on achieving excellent ratings to distinguish their organization from others. When it comes to customer loyalty, "excellent" has a different meaning. Customers who are merely satisfied often do not come back. The purpose of this study was to find out what influences adult patients to rate their overall experience as "excellent." The study used patient satisfaction data collected from one major academic hospital and four community hospitals. After conducting a multiple logistic regression analysis, certain attributes were shown to be more likely than others to influence patients to rate their experiences as excellent. The study revealed that staff care is the most influential attribute, followed by nursing care. These two attributes are distinctively stronger drivers of overall satisfaction than are the other attributes studied (i.e., physician care, admission process, room, and food). Staff care and nursing care are under the control of healthcare managers. If improvements are needed, they can be accomplished through training programs such as total quality management or continuous quality improvement, through which staff employees and nurses learn to be sensitive to patients' needs. Satisfying patients' needs is the first step toward having loyal patients, so hospitals that strive to ensure their patients are completely satisfied are more likely to prosper.

An importance-performance analysis of hospital information system attributes: A nurses' perspective.

PubMed

Cohen, Jason F; Coleman, Emma; Kangethe, Matheri J

2016-02-01

Health workers have numerous concerns about hospital IS (HIS) usage. Addressing these concerns requires understanding the system attributes most important to their satisfaction and productivity. Following a recent HIS implementation, our objective was to identify priorities for managerial intervention based on user evaluations of the performance of the HIS attributes as well as the relative importance of these attributes to user satisfaction and productivity outcomes. We collected data along a set of attributes representing system quality, data quality, information quality, and service quality from 154 nurse users. Their quantitative responses were analysed using the partial least squares approach followed by an importance-performance analysis. Qualitative responses were analysed using thematic analysis to triangulate and supplement the quantitative findings. Two system quality attributes (responsiveness and ease of learning), one information quality attribute (detail), one service quality attribute (sufficient support), and three data quality attributes (records complete, accurate and never missing) were identified as high priorities for intervention. Our application of importance-performance analysis is unique in HIS evaluation and we have illustrated its utility for identifying those system attributes for which underperformance is not acceptable to users and therefore should be high priorities for intervention. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Drifts in ADCC-related quality attributes of Herceptin®: Impact on development of a trastuzumab biosimilar.

PubMed

Kim, Seokkyun; Song, Jinsu; Park, Seungkyu; Ham, Sunyoung; Paek, Kyungyeol; Kang, Minjung; Chae, Yunjung; Seo, Heewon; Kim, Hyung-Chan; Flores, Michael

A biosimilar product needs to demonstrate biosimilarity to the originator reference product, and the quality profile of the latter should be monitored throughout the period of the biosimilar's development to match the quality attributes of the 2 products that relate to efficacy and safety. For the development of a biosimilar version of trastuzumab, the reference product, Herceptin®, was extensively characterized for the main physicochemical and biologic properties by standard or state-of-the-art analytical methods, using multiple lots expiring between March 2015 and December 2019. For lots with expiry dates up to July 2018, a high degree of consistency was observed for all the tested properties. However, among the lots expiring in August 2018 or later, a downward drift was observed in %afucose (G0+G1+G2). Furthermore, the upward drift of %high mannose (M5+M6) was observed in the lots with expiry dates from June 2019 to December 2019. As a result, the combination of %afucose and %high mannose showed 2 marked drifts in the lots with expiry dates from August 2018 to December 2019, which was supported by the similar trend of biologic data, such as FcγRIIIa binding and antibody-dependent cell-mediated cytotoxicity (ADCC) activity. Considering that ADCC is one of the clinically relevant mechanisms of action for trastuzumab, the levels of %afucose and %high mannose should be tightly monitored as critical quality attributes for biosimilar development of trastuzumab.

Drifts in ADCC-related quality attributes of Herceptin®: Impact on development of a trastuzumab biosimilar

PubMed Central

Kim, Seokkyun; Song, Jinsu; Park, Seungkyu; Ham, Sunyoung; Paek, Kyungyeol; Kang, Minjung; Chae, Yunjung; Seo, Heewon; Kim, Hyung-Chan; Flores, Michael

2017-01-01

ABSTRACT A biosimilar product needs to demonstrate biosimilarity to the originator reference product, and the quality profile of the latter should be monitored throughout the period of the biosimilar's development to match the quality attributes of the 2 products that relate to efficacy and safety. For the development of a biosimilar version of trastuzumab, the reference product, Herceptin®, was extensively characterized for the main physicochemical and biologic properties by standard or state-of-the-art analytical methods, using multiple lots expiring between March 2015 and December 2019. For lots with expiry dates up to July 2018, a high degree of consistency was observed for all the tested properties. However, among the lots expiring in August 2018 or later, a downward drift was observed in %afucose (G0+G1+G2). Furthermore, the upward drift of %high mannose (M5+M6) was observed in the lots with expiry dates from June 2019 to December 2019. As a result, the combination of %afucose and %high mannose showed 2 marked drifts in the lots with expiry dates from August 2018 to December 2019, which was supported by the similar trend of biologic data, such as FcγRIIIa binding and antibody-dependent cell-mediated cytotoxicity (ADCC) activity. Considering that ADCC is one of the clinically relevant mechanisms of action for trastuzumab, the levels of %afucose and %high mannose should be tightly monitored as critical quality attributes for biosimilar development of trastuzumab. PMID:28296619

Compressed Sensing mm-Wave SAR for Non-Destructive Testing Applications Using Multiple Weighted Side Information.

PubMed

Becquaert, Mathias; Cristofani, Edison; Van Luong, Huynh; Vandewal, Marijke; Stiens, Johan; Deligiannis, Nikos

2018-05-31

This work explores an innovative strategy for increasing the efficiency of compressed sensing applied on mm-wave SAR sensing using multiple weighted side information. The approach is tested on synthetic and on real non-destructive testing measurements performed on a 3D-printed object with defects while taking advantage of multiple previous SAR images of the object with different degrees of similarity. The tested algorithm attributes autonomously weights to the side information at two levels: (1) between the components inside the side information and (2) between the different side information. The reconstruction is thereby almost immune to poor quality side information while exploiting the relevant components hidden inside the added side information. The presented results prove that, in contrast to common compressed sensing, good SAR image reconstruction is achieved at subsampling rates far below the Nyquist rate. Moreover, the algorithm is shown to be much more robust for low quality side information compared to coherent background subtraction.

Methods for assessing the quality of data in public health information systems: a critical review.

PubMed

Chen, Hong; Yu, Ping; Hailey, David; Wang, Ning

2014-01-01

The quality of data in public health information systems can be ensured by effective data quality assessment. In order to conduct effective data quality assessment, measurable data attributes have to be precisely defined. Then reliable and valid measurement methods for data attributes have to be used to measure each attribute. We conducted a systematic review of data quality assessment methods for public health using major databases and well-known institutional websites. 35 studies were eligible for inclusion in the study. A total of 49 attributes of data quality were identified from the literature. Completeness, accuracy and timeliness were the three most frequently assessed attributes of data quality. Most studies directly examined data values. This is complemented by exploring either data users' perception or documentation quality. However, there are limitations of current data quality assessment methods: a lack of consensus on attributes measured; inconsistent definition of the data quality attributes; a lack of mixed methods for assessing data quality; and inadequate attention to reliability and validity. Removal of these limitations is an opportunity for further improvement.

Beef quality attributes: A systematic review of consumer perspectives.

PubMed

Henchion, Maeve M; McCarthy, Mary; Resconi, Virginia C

2017-06-01

Informed by quality theory, this systematic literature review seeks to determine the relative importance of beef quality attributes from a consumer perspective, considering search, experience and credence quality attributes. While little change is anticipated in consumer ranking of search and experience attributes in the future, movement is expected in terms of ranking within the credence category and also in terms of the ranking of credence attributes overall. This highlights an opportunity for quality assurance schemes (QAS) to become more consumer focused through including a wider range of credence attributes. To capitalise on this opportunity, the meat industry should actively anticipate new relevant credence attributes and researchers need to develop new or better methods to measure them. This review attempts to identify the most relevant quality attributes in beef that may be considered in future iterations of QAS, to increase consumer satisfaction and, potentially, to increase returns to industry. Copyright © 2017 Elsevier Ltd. All rights reserved.

Predicting social and communicative ability in school-age children with autism spectrum disorder: A pilot study of the Social Attribution Task, Multiple Choice.

PubMed

Burger-Caplan, Rebecca; Saulnier, Celine; Jones, Warren; Klin, Ami

2016-11-01

The Social Attribution Task, Multiple Choice is introduced as a measure of implicit social cognitive ability in children, addressing a key challenge in quantification of social cognitive function in autism spectrum disorder, whereby individuals can often be successful in explicit social scenarios, despite marked social adaptive deficits. The 19-question Social Attribution Task, Multiple Choice, which presents ambiguous stimuli meant to elicit social attribution, was administered to children with autism spectrum disorder (N = 23) and to age-matched and verbal IQ-matched typically developing children (N = 57). The Social Attribution Task, Multiple Choice performance differed between autism spectrum disorder and typically developing groups, with typically developing children performing significantly better than children with autism spectrum disorder. The Social Attribution Task, Multiple Choice scores were positively correlated with age (r = 0.474) while being independent from verbal IQ (r = 0.236). The Social Attribution Task, Multiple Choice was strongly correlated with Vineland Adaptive Behavior Scales Communication (r = 0.464) and Socialization (r = 0.482) scores, but not with Daily Living Skills scores (r = 0.116), suggesting that the implicit social cognitive ability underlying performance on the Social Attribution Task, Multiple Choice is associated with real-life social adaptive function. © The Author(s) 2016.

Establishing Core Mental Health Workforce Attributes for the Effective Mental Health Care of People with an Intellectual Disability and Co-Occurring Mental Ill Health

ERIC Educational Resources Information Center

Weise, Janelle; Fisher, Karen R.; Trollor, Julian N.

2017-01-01

Background: People with intellectual disability experience high rates of mental ill health but multiple barriers to access to quality mental health care. One significant barrier to access is a generalist mental health workforce that lacks capacity, and consensus on what constitutes core workforce competencies in this area. As such, the first step…

Reduced-fat foods: the complex science of developing diet-based strategies for tackling overweight and obesity.

PubMed

McClements, David J

2015-05-01

Fat plays multiple roles in determining the desirable physicochemical properties, sensory attributes, nutritional profile, and biologic response of food products. Overconsumption of fats is linked to chronic diseases, such as obesity, coronary heart disease, diabetes, and cancer. There is therefore a need to develop reduced-fat products with physicochemical properties and sensory profiles that match those of their full-fat counterparts. In addition, foods may be redesigned to increase the feelings of satiety and satiation, and thereby reduce overall food intake. The successful design of these types of functional foods requires a good understanding of the numerous roles that fat plays in determining food attributes and the development of effective strategies to replace these attributes. This article provides an overview of the current understanding of the influence of fat on the physicochemical and physiologic attributes of emulsion-based food products and highlights approaches to create high-quality foods with reduced-fat contents. © 2015 American Society for Nutrition.

Reduced-Fat Foods: The Complex Science of Developing Diet-Based Strategies for Tackling Overweight and Obesity1234

PubMed Central

McClements, David J

2015-01-01

Fat plays multiple roles in determining the desirable physicochemical properties, sensory attributes, nutritional profile, and biologic response of food products. Overconsumption of fats is linked to chronic diseases, such as obesity, coronary heart disease, diabetes, and cancer. There is therefore a need to develop reduced-fat products with physicochemical properties and sensory profiles that match those of their full-fat counterparts. In addition, foods may be redesigned to increase the feelings of satiety and satiation, and thereby reduce overall food intake. The successful design of these types of functional foods requires a good understanding of the numerous roles that fat plays in determining food attributes and the development of effective strategies to replace these attributes. This article provides an overview of the current understanding of the influence of fat on the physicochemical and physiologic attributes of emulsion-based food products and highlights approaches to create high-quality foods with reduced-fat contents. PMID:25979507

Patient perspectives of telemedicine quality

PubMed Central

LeRouge, Cynthia M; Garfield, Monica J; Hevner, Alan R

2015-01-01

Background The purpose of this study was to explore the quality attributes required for effective telemedicine encounters from the perspective of the patient. Methods We used a multi-method (direct observation, focus groups, survey) field study to collect data from patients who had experienced telemedicine encounters. Multi-perspectives (researcher and provider) were used to interpret a rich set of data from both a research and practice perspective. Results The result of this field study is a taxonomy of quality attributes for telemedicine service encounters that prioritizes the attributes from the patient perspective. We identify opportunities to control the level of quality for each attribute (ie, who is responsible for control of each attribute and when control can be exerted in relation to the encounter process). This analysis reveals that many quality attributes are in the hands of various stakeholders, and all attributes can be addressed proactively to some degree before the encounter begins. Conclusion Identification of the quality attributes important to a telemedicine encounter from a patient perspective enables one to better design telemedicine encounters. This preliminary work not only identifies such attributes, but also ascertains who is best able to address quality issues prior to an encounter. For practitioners, explicit representation of the quality attributes of technology-based systems and processes and insight on controlling key attributes are essential to implementation, utilization, management, and common understanding. PMID:25565781

Identification and Prioritization of Important Attributes of Disease-Modifying Drugs in Decision Making among Patients with Multiple Sclerosis: A Nominal Group Technique and Best-Worst Scaling

PubMed Central

Kremer, Ingrid E. H.; van der Weijden, Trudy; van de Kolk, Ilona

2016-01-01

Objectives Understanding the preferences of patients with multiple sclerosis (MS) for disease-modifying drugs and involving these patients in clinical decision making can improve the concordance between medical decisions and patient values and may, subsequently, improve adherence to disease-modifying drugs. This study aims first to identify which characteristics–or attributes–of disease-modifying drugs influence patients´ decisions about these treatments and second to quantify the attributes’ relative importance among patients. Methods First, three focus groups of relapsing-remitting MS patients were formed to compile a preliminary list of attributes using a nominal group technique. Based on this qualitative research, a survey with several choice tasks (best-worst scaling) was developed to prioritize attributes, asking a larger patient group to choose the most and least important attributes. The attributes’ mean relative importance scores (RIS) were calculated. Results Nineteen patients reported 34 attributes during the focus groups and 185 patients evaluated the importance of the attributes in the survey. The effect on disease progression received the highest RIS (RIS = 9.64, 95% confidence interval: [9.48–9.81]), followed by quality of life (RIS = 9.21 [9.00–9.42]), relapse rate (RIS = 7.76 [7.39–8.13]), severity of side effects (RIS = 7.63 [7.33–7.94]) and relapse severity (RIS = 7.39 [7.06–7.73]). Subgroup analyses showed heterogeneity in preference of patients. For example, side effect-related attributes were statistically more important for patients who had no experience in using disease-modifying drugs compared to experienced patients (p < .001). Conclusions This study shows that, on average, patients valued effectiveness and unwanted effects as most important. Clinicians should be aware of the average preferences but also that attributes of disease-modifying drugs are valued differently by different patients. Person-centred clinical decision making would be needed and requires eliciting individual preferences. PMID:27812117

The Sensory Features of a Food Cue Influence Its Ability to Act as an Incentive Stimulus and Evoke Dopamine Release in the Nucleus Accumbens Core

ERIC Educational Resources Information Center

Singer, Bryan F.; Bryan, Myranda A.; Popov, Pavlo; Scarff, Raymond; Carter, Cody; Wright, Erin; Aragona, Brandon J.; Robinson, Terry E.

2016-01-01

The sensory properties of a reward-paired cue (a conditioned stimulus; CS) may impact the motivational value attributed to the cue, and in turn influence the form of the conditioned response (CR) that develops. A cue with multiple sensory qualities, such as a moving lever-CS, may activate numerous neural pathways that process auditory and visual…

Dose-response relationships in multifunctional food design: assembling the evidence.

PubMed

Aggett, Peter J

2012-03-01

Demonstrating single and multiple functions attributable to foods or specific food components is a challenge. The International Life Sciences Institute Europe co-ordinated EU concerted actions, Functional Food Science in Europe (FUFOSE) and the Process for the Assessment of Scientific Support for Claims on Food (PASSCLAIM), respectively, addressed the soundness of the evidence and its coherence with a mechanistic schema comprising valid markers of exposure, intermediate and final outcomes and the quality and integrity of the evidence overall. Demonstrating causality often relies on randomized controlled trials (RCTs). However, in public health and biomedical science there is concern about the suitability of RCTs as sole standards of evidence-based approaches. Alternative and complementary approaches using updated Hill's viewpoints for appraising the evidence can be used in conjunction with evidence-based mechanistic reasoning and the quality criteria proposed in FUFOSE and PASSCLAIM to design studies and to assemble evidence exploring single or multiple benefits from food components and foods.

A novel 3D imaging system for strawberry phenotyping.

PubMed

He, Joe Q; Harrison, Richard J; Li, Bo

2017-01-01

Accurate and quantitative phenotypic data in plant breeding programmes is vital in breeding to assess the performance of genotypes and to make selections. Traditional strawberry phenotyping relies on the human eye to assess most external fruit quality attributes, which is time-consuming and subjective. 3D imaging is a promising high-throughput technique that allows multiple external fruit quality attributes to be measured simultaneously. A low cost multi-view stereo (MVS) imaging system was developed, which captured data from 360° around a target strawberry fruit. A 3D point cloud of the sample was derived and analysed with custom-developed software to estimate berry height, length, width, volume, calyx size, colour and achene number. Analysis of these traits in 100 fruits showed good concordance with manual assessment methods. This study demonstrates the feasibility of an MVS based 3D imaging system for the rapid and quantitative phenotyping of seven agronomically important external strawberry traits. With further improvement, this method could be applied in strawberry breeding programmes as a cost effective phenotyping technique.

Evaluation of the visual performance of image processing pipes: information value of subjective image attributes

NASA Astrophysics Data System (ADS)

Nyman, G.; Häkkinen, J.; Koivisto, E.-M.; Leisti, T.; Lindroos, P.; Orenius, O.; Virtanen, T.; Vuori, T.

2010-01-01

Subjective image quality data for 9 image processing pipes and 8 image contents (taken with mobile phone camera, 72 natural scene test images altogether) from 14 test subjects were collected. A triplet comparison setup and a hybrid qualitative/quantitative methodology were applied. MOS data and spontaneous, subjective image quality attributes to each test image were recorded. The use of positive and negative image quality attributes by the experimental subjects suggested a significant difference between the subjective spaces of low and high image quality. The robustness of the attribute data was shown by correlating DMOS data of the test images against their corresponding, average subjective attribute vector length data. The findings demonstrate the information value of spontaneous, subjective image quality attributes in evaluating image quality at variable quality levels. We discuss the implications of these findings for the development of sensitive performance measures and methods in profiling image processing systems and their components, especially at high image quality levels.

Empirical research on Kano’s model and customer satisfaction

PubMed Central

Lin, Feng-Han; Tsai, Sang-Bing; Lee, Yu-Cheng; Hsiao, Cheng-Fu; Zhou, Jie; Wang, Jiangtao; Shang, Zhiwen

2017-01-01

Products are now developed based on what customers desire, and thus attractive quality creation has become crucial. In studies on customer satisfaction, methods for analyzing quality attributes and enhancing customer satisfaction have been proposed to facilitate product development. Although substantial studies have performed to assess the impact of the attributes on customer satisfaction, little research has been conducted that quantitatively calculate the odds of customer satisfaction for the Kano classification, fitting a nonlinear relationship between attribute-level performance and customer satisfaction. In the present study, the odds of customer satisfaction were determined to identify the classification of quality attributes, and took customer psychology into account to suggest how decision-makers should prioritize the allocation of resources. A novel method for quantitatively assessing quality attributes was proposed to determine classification criteria and fit the nonlinear relationship between quality attributes and customer satisfaction. Subsequently, a case study was conducted on bicycle user satisfaction to verify the novel method. The concept of customer satisfaction odds was integrated with the value function from prospect theory to understand quality attributes. The results of this study can serve as a reference for product designers to create attractive quality attributes in their products and thus enhance customer satisfaction. PMID:28873418

Empirical research on Kano's model and customer satisfaction.

PubMed

Lin, Feng-Han; Tsai, Sang-Bing; Lee, Yu-Cheng; Hsiao, Cheng-Fu; Zhou, Jie; Wang, Jiangtao; Shang, Zhiwen

2017-01-01

Products are now developed based on what customers desire, and thus attractive quality creation has become crucial. In studies on customer satisfaction, methods for analyzing quality attributes and enhancing customer satisfaction have been proposed to facilitate product development. Although substantial studies have performed to assess the impact of the attributes on customer satisfaction, little research has been conducted that quantitatively calculate the odds of customer satisfaction for the Kano classification, fitting a nonlinear relationship between attribute-level performance and customer satisfaction. In the present study, the odds of customer satisfaction were determined to identify the classification of quality attributes, and took customer psychology into account to suggest how decision-makers should prioritize the allocation of resources. A novel method for quantitatively assessing quality attributes was proposed to determine classification criteria and fit the nonlinear relationship between quality attributes and customer satisfaction. Subsequently, a case study was conducted on bicycle user satisfaction to verify the novel method. The concept of customer satisfaction odds was integrated with the value function from prospect theory to understand quality attributes. The results of this study can serve as a reference for product designers to create attractive quality attributes in their products and thus enhance customer satisfaction.

Main Quality Attributes of Monoclonal Antibodies and Effect of Cell Culture Components

PubMed

Torkashvand, Fatemeh; Vaziri, Behrouz

2017-05-01

The culture media optimization is an inevitable part of upstream process development in therapeutic monoclonal antibodies (mAbs) production. The quality by design (QbD) approach defines the assured quality of the final product through the development stage. An important step in QbD is determination of the main quality attributes. During the media optimization, some of the main quality attributes such as glycosylation pattern, charge variants, aggregates, and low-molecular-weight species, could be significantly altered. Here, we provide an overview of how cell culture medium components affects the main quality attributes of the mAbs. Knowing the relationship between the culture media components and the main quality attributes could be successfully utilized for a rational optimization of mammalian cell culture media for industrial mAbs production.

Multiple-attribute group decision making with different formats of preference information on attributes.

PubMed

Xu, Zeshui

2007-12-01

Interval utility values, interval fuzzy preference relations, and interval multiplicative preference relations are three common uncertain-preference formats used by decision-makers to provide their preference information in the process of decision making under fuzziness. This paper is devoted in investigating multiple-attribute group-decision-making problems where the attribute values are not precisely known but the value ranges can be obtained, and the decision-makers provide their preference information over attributes by three different uncertain-preference formats i.e., 1) interval utility values; 2) interval fuzzy preference relations; and 3) interval multiplicative preference relations. We first utilize some functions to normalize the uncertain decision matrix and then transform it into an expected decision matrix. We establish a goal-programming model to integrate the expected decision matrix and all three different uncertain-preference formats from which the attribute weights and the overall attribute values of alternatives can be obtained. Then, we use the derived overall attribute values to get the ranking of the given alternatives and to select the best one(s). The model not only can reflect both the subjective considerations of all decision-makers and the objective information but also can avoid losing and distorting the given objective and subjective decision information in the process of information integration. Furthermore, we establish some models to solve the multiple-attribute group-decision-making problems with three different preference formats: 1) utility values; 2) fuzzy preference relations; and 3) multiplicative preference relations. Finally, we illustrate the applicability and effectiveness of the developed models with two practical examples.

A roadmap for improving healthcare service quality.

PubMed

Kennedy, Denise M; Caselli, Richard J; Berry, Leonard L

2011-01-01

A data-driven, comprehensive model for improving service and creating long-term value was developed and implemented at Mayo Clinic Arizona (MCA). Healthcare organizations can use this model to prepare for value-based purchasing, a payment system in which quality and patient experience measures will influence reimbursement. Surviving and thriving in such a system will require a comprehensive approach to sustaining excellent service performance from physicians and allied health staff (e.g., nurses, technicians, nonclinical staff). The seven prongs in MCA's service quality improvement model are (1) multiple data sources to drive improvement, (2) accountability for service quality, (3) service consultation and improvement tools, (4) service values and behaviors, (5) education and training, (6) ongoing monitoring and control, and (7) recognition and reward. The model was fully implemented and tested in five departments in which patient perception of provider-specific service attributes and/or overall quality of care were below the 90th percentile for patient satisfaction in the vendor's database. Extent of the implementation was at the discretion of department leadership. Perception data rating various service attributes were collected from randomly selected patients and monitored over a 24-month period. The largest increases in patient perception of excellence over the pilot period were realized when all seven prongs of the model were implemented as a comprehensive improvement approach. The results of this pilot may help other healthcare organizations prepare for value-based purchasing.

Implementation of quality by design principles in the development of microsponges as drug delivery carriers: Identification and optimization of critical factors using multivariate statistical analyses and design of experiments studies.

PubMed

Simonoska Crcarevska, Maja; Dimitrovska, Aneta; Sibinovska, Nadica; Mladenovska, Kristina; Slavevska Raicki, Renata; Glavas Dodov, Marija

2015-07-15

Microsponges drug delivery system (MDDC) was prepared by double emulsion-solvent-diffusion technique using rotor-stator homogenization. Quality by design (QbD) concept was implemented for the development of MDDC with potential to be incorporated into semisolid dosage form (gel). Quality target product profile (QTPP) and critical quality attributes (CQA) were defined and identified, accordingly. Critical material attributes (CMA) and Critical process parameters (CPP) were identified using quality risk management (QRM) tool, failure mode, effects and criticality analysis (FMECA). CMA and CPP were identified based on results obtained from principal component analysis (PCA-X&Y) and partial least squares (PLS) statistical analysis along with literature data, product and process knowledge and understanding. FMECA identified amount of ethylcellulose, chitosan, acetone, dichloromethane, span 80, tween 80 and water ratio in primary/multiple emulsions as CMA and rotation speed and stirrer type used for organic solvent removal as CPP. The relationship between identified CPP and particle size as CQA was described in the design space using design of experiments - one-factor response surface method. Obtained results from statistically designed experiments enabled establishment of mathematical models and equations that were used for detailed characterization of influence of identified CPP upon MDDC particle size and particle size distribution and their subsequent optimization. Copyright © 2015 Elsevier B.V. All rights reserved.

Quality Attributes for Mission Flight Software: A Reference for Architects

NASA Technical Reports Server (NTRS)

Wilmot, Jonathan; Fesq, Lorraine; Dvorak, Dan

2016-01-01

In the international standards for architecture descriptions in systems and software engineering (ISO/IEC/IEEE 42010), "concern" is a primary concept that often manifests itself in relation to the quality attributes or "ilities" that a system is expected to exhibit - qualities such as reliability, security and modifiability. One of the main uses of an architecture description is to serve as a basis for analyzing how well the architecture achieves its quality attributes, and that requires architects to be as precise as possible about what they mean in claiming, for example, that an architecture supports "modifiability." This paper describes a table, generated by NASA's Software Architecture Review Board, which lists fourteen key quality attributes, identifies different important aspects of each quality attribute and considers each aspect in terms of requirements, rationale, evidence, and tactics to achieve the aspect. This quality attribute table is intended to serve as a guide to software architects, software developers, and software architecture reviewers in the domain of mission-critical real-time embedded systems, such as space mission flight software.

Multiscale imaging of bone microdamage

PubMed Central

Poundarik, Atharva A.; Vashishth, Deepak

2015-01-01

Bone is a structural and hierarchical composite that exhibits remarkable ability to sustain complex mechanical loading and resist fracture. Bone quality encompasses various attributes of bone matrix from the quality of its material components (type-I collagen, mineral and non-collagenous matrix proteins) and cancellous microarchitecture, to the nature and extent of bone microdamage. Microdamage, produced during loading, manifests in multiple forms across the scales of hierarchy in bone and functions to dissipate energy and avert fracture. Microdamage formation is a key determinant of bone quality, and through a range of biological and physical mechanisms, accumulates with age and disease. Accumulated microdamage in bone decreases bone strength and increases bone’s propensity to fracture. Thus, a thorough assessment of microdamage, across the hierarchical levels of bone, is crucial to better understand bone quality and bone fracture. This review article details multiple imaging modalities that have been used to study and characterize microdamage; from bulk staining techniques originally developed by Harold Frost to assess linear microcracks, to atomic force microscopy, a modality that revealed mechanistic insights into the formation diffuse damage at the ultrastructural level in bone. New automated techniques using imaging modalities such as microcomputed tomography are also presented for a comprehensive overview. PMID:25664772

Provider Monitoring and Pay-for-Performance When Multiple Providers Affect Outcomes: An Application to Renal Dialysis

PubMed Central

Hirth, Richard A; Turenne, Marc N; Wheeler, John RC; Pan, Qing; Ma, Yu; Messana, Joseph M

2009-01-01

Objective To characterize the influence of dialysis facilities and nephrologists on resource use and patient outcomes in the dialysis population and to illustrate how such information can be used to inform payment system design. Data Sources Medicare claims for all hemodialysis patients for whom Medicare was the primary payer in 2004, combined with the Medicare Enrollment Database and the CMS Medical Evidence Form (CMS Form 2728), which is completed at onset of renal replacement therapy. Study Design Resource use (mainly drugs and laboratory tests) per dialysis session and two clinical outcomes (achieving targets for anemia management and dose of dialysis) were modeled at the patient level with random effects for nephrologist and dialysis facility, controlling for patient characteristics. Results For each measure, both the physician and the facility had significant effects. However, facilities were more influential than physicians, as measured by the standard deviation of the random effects. Conclusions The success of tools such as P4P and provider profiling relies upon the identification of providers most able to enhance efficiency and quality. This paper demonstrates a method for determining the extent to which variation in health care costs and quality of care can be attributed to physicians and institutional providers. Because variation in quality and cost attributable to facilities is consistently larger than that attributable to physicians, if provider profiling or financial incentives are targeted to only one type of provider, the facility appears to be the appropriate locus. PMID:19555398

Decision Making In Assignment Problem With Multiple Attributes Under Intuitionistic Fuzzy Environment

NASA Astrophysics Data System (ADS)

Mukherjee, Sathi; Basu, Kajla

2010-10-01

In this paper we develop a methodology to solve the multiple attribute assignment problems where the attributes are considered to be Intuitionistic Fuzzy Sets (IFS). We apply the concept of similarity measures of IFS to solve the Intuitionistic Fuzzy Multi-Attribute Assignment Problem (IFMAAP). The weights of the attributes are determined from expert opinion. An illustrative example is solved to verify the developed approach and to demonstrate its practicality.

Explaining variation in perceived team effectiveness: results from eleven quality improvement collaboratives.

PubMed

Strating, Mathilde M H; Nieboer, Anna P

2013-06-01

Explore effectiveness of 11 collaboratives focusing on 11 different topics, as perceived by local improvement teams and to explore associations with collaborative-, organisational- and team-level factors. Evidence underlying the effectiveness of quality improvement collaboratives is inconclusive and few studies investigated determinants of implementation success. Moreover, most evaluation studies on quality improvement collaboratives are based on one specific topic or quality problem, making it hard to compare across collaboratives addressing different topics. A multiple-case cross-sectional study. Quality improvement teams in 11 quality improvement collaboratives focusing on 11 different topics. Team members received a postal questionnaire at the end of each collaborative. Of the 283 improvement teams, 151 project leaders and 362 team members returned the questionnaire. Analysis of variance revealed that teams varied widely on perceived effectiveness. Especially, members in the Prevention of Malnutrition and Prevention of Medication Errors collaboratives perceived a higher effectiveness than other groups. Multilevel regression analyses showed that educational level of professionals, innovation attributes, organisational support, innovative culture and commitment to change were all significant predictors of perceived effectiveness. In total, 27·9% of the individual-level variance, 57·6% of the team-level variance and 80% of the collaborative-level variance could be explained. The innovation's attributes, organisational support, an innovative team culture and professionals' commitment to change are instrumental to perceived effectiveness. The results support the notion that a layered approach is necessary to achieve improvements in quality of care and provides further insight in the determinants of success of quality improvement collaboratives. Understanding which factors enhance the impact of quality improvement initiatives can help professionals to achieve breakthrough improvement in care delivery to patients on a wide variety of quality problems. © 2012 Blackwell Publishing Ltd.

Urban air quality forecasting based on multi-dimensional collaborative Support Vector Regression (SVR): A case study of Beijing-Tianjin-Shijiazhuang

PubMed Central

Liu, Bing-Chun; Binaykia, Arihant; Chang, Pei-Chann; Tiwari, Manoj Kumar; Tsao, Cheng-Chin

2017-01-01

Today, China is facing a very serious issue of Air Pollution due to its dreadful impact on the human health as well as the environment. The urban cities in China are the most affected due to their rapid industrial and economic growth. Therefore, it is of extreme importance to come up with new, better and more reliable forecasting models to accurately predict the air quality. This paper selected Beijing, Tianjin and Shijiazhuang as three cities from the Jingjinji Region for the study to come up with a new model of collaborative forecasting using Support Vector Regression (SVR) for Urban Air Quality Index (AQI) prediction in China. The present study is aimed to improve the forecasting results by minimizing the prediction error of present machine learning algorithms by taking into account multiple city multi-dimensional air quality information and weather conditions as input. The results show that there is a decrease in MAPE in case of multiple city multi-dimensional regression when there is a strong interaction and correlation of the air quality characteristic attributes with AQI. Also, the geographical location is found to play a significant role in Beijing, Tianjin and Shijiazhuang AQI prediction. PMID:28708836

Attributes of patient-centered primary care associated with the public perception of good healthcare quality in Brazil, Colombia, Mexico and El Salvador.

PubMed

Doubova, Svetlana V; Guanais, Frederico C; Pérez-Cuevas, Ricardo; Canning, David; Macinko, James; Reich, Michael R

2016-09-01

This study evaluated primary care attributes of patient-centered care associated with the public perception of good quality in Brazil, Colombia, Mexico and El Salvador. We conducted a secondary data analysis of a Latin American survey on public perceptions and experiences with healthcare systems. The primary care attributes examined were access, coordination, provider-patient communication, provision of health-related information and emotional support. A double-weighted multiple Poisson regression with robust variance model was performed. The study included between 1500 and 1503 adults in each country. The results identified four significant gaps in the provision of primary care: not all respondents had a regular place of care or a regular primary care doctor (Brazil 35.7%, Colombia 28.4%, Mexico 22% and El Salvador 45.4%). The communication with the primary care clinic was difficult (Brazil 44.2%, Colombia 41.3%, Mexico 45.1% and El Salvador 56.7%). There was a lack of coordination of care (Brazil 78.4%, Colombia 52.3%, Mexico 48% and El Salvador 55.9%). Also, there was a lack of information about healthy diet (Brazil 21.7%, Colombia 32.9%, Mexico 16.9% and El Salvador 20.8%). The public's perception of good quality was variable (Brazil 67%, Colombia 71.1%, Mexico 79.6% and El Salvador 79.5%). The primary care attributes associated with the perception of good quality were a primary care provider 'who knows relevant information about a patient's medical history', 'solves most of the health problems', 'spends enough time with the patient', 'coordinates healthcare' and a 'primary care clinic that is easy to communicate with'. In conclusion, the public has a positive perception of the quality of primary care, although it has unfulfilled expectations; further efforts are necessary to improve the provision of patient-centered primary care services in these four Latin American countries. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Elaboration on an Integrated Architecture and Requirement Practice: Prototyping with Quality Attribute Focus

DTIC Science & Technology

2013-05-01

release level prototyping as:  The R&D prototype is typically funded by the organization, rather than the client .  The work is done in an R&D...performance) with hopes that this capability could be offered to multiple clients . The clustering prototype is developed in the organization’s R&D...ICSE Conference 2013) [5] A. Martini, L. Pareto , and J. Bosch, “Enablers and inhibitors for speed with reuse,” Proceedings of the 16th Software

Performance enhancement of GaN ultraviolet avalanche photodiodes with p-type δ-doping

NASA Astrophysics Data System (ADS)

Bayram, C.; Pau, J. L.; McClintock, R.; Razeghi, M.

2008-06-01

High quality δ-doped p-GaN is used as a means of improving the performance of back-illuminated GaN avalanche photodiodes (APDs). Devices with δ-doped p-GaN show consistently lower leakage current and lower breakdown voltage than those with bulk p-GaN. APDs with δ-doped p-GaN also achieve a maximum multiplication gain of 5.1×104, more than 50 times higher than that obtained in devices with bulk p-GaN. The better device performance of APDs with δ-doped p-GaN is attributed to the higher structural quality of the p-GaN layer achieved via δ-doping.

Effect of denoising on supervised lung parenchymal clusters

NASA Astrophysics Data System (ADS)

Jayamani, Padmapriya; Raghunath, Sushravya; Rajagopalan, Srinivasan; Karwoski, Ronald A.; Bartholmai, Brian J.; Robb, Richard A.

2012-03-01

Denoising is a critical preconditioning step for quantitative analysis of medical images. Despite promises for more consistent diagnosis, denoising techniques are seldom explored in clinical settings. While this may be attributed to the esoteric nature of the parameter sensitve algorithms, lack of quantitative measures on their ecacy to enhance the clinical decision making is a primary cause of physician apathy. This paper addresses this issue by exploring the eect of denoising on the integrity of supervised lung parenchymal clusters. Multiple Volumes of Interests (VOIs) were selected across multiple high resolution CT scans to represent samples of dierent patterns (normal, emphysema, ground glass, honey combing and reticular). The VOIs were labeled through consensus of four radiologists. The original datasets were ltered by multiple denoising techniques (median ltering, anisotropic diusion, bilateral ltering and non-local means) and the corresponding ltered VOIs were extracted. Plurality of cluster indices based on multiple histogram-based pair-wise similarity measures were used to assess the quality of supervised clusters in the original and ltered space. The resultant rank orders were analyzed using the Borda criteria to nd the denoising-similarity measure combination that has the best cluster quality. Our exhaustive analyis reveals (a) for a number of similarity measures, the cluster quality is inferior in the ltered space; and (b) for measures that benet from denoising, a simple median ltering outperforms non-local means and bilateral ltering. Our study suggests the need to judiciously choose, if required, a denoising technique that does not deteriorate the integrity of supervised clusters.

More Than Just Accuracy: A Novel Method to Incorporate Multiple Test Attributes in Evaluating Diagnostic Tests Including Point of Care Tests.

PubMed

Thompson, Matthew; Weigl, Bernhard; Fitzpatrick, Annette; Ide, Nicole

2016-01-01

Current frameworks for evaluating diagnostic tests are constrained by a focus on diagnostic accuracy, and assume that all aspects of the testing process and test attributes are discrete and equally important. Determining the balance between the benefits and harms associated with new or existing tests has been overlooked. Yet, this is critically important information for stakeholders involved in developing, testing, and implementing tests. This is particularly important for point of care tests (POCTs) where tradeoffs exist between numerous aspects of the testing process and test attributes. We developed a new model that multiple stakeholders (e.g., clinicians, patients, researchers, test developers, industry, regulators, and health care funders) can use to visualize the multiple attributes of tests, the interactions that occur between these attributes, and their impacts on health outcomes. We use multiple examples to illustrate interactions between test attributes (test availability, test experience, and test results) and outcomes, including several POCTs. The model could be used to prioritize research and development efforts, and inform regulatory submissions for new diagnostics. It could potentially provide a way to incorporate the relative weights that various subgroups or clinical settings might place on different test attributes. Our model provides a novel way that multiple stakeholders can use to visualize test attributes, their interactions, and impacts on individual and population outcomes. We anticipate that this will facilitate more informed decision making around diagnostic tests.

Genetic dissection of sorghum grain quality traits using diverse and segregating populations.

PubMed

Boyles, Richard E; Pfeiffer, Brian K; Cooper, Elizabeth A; Rauh, Bradley L; Zielinski, Kelsey J; Myers, Matthew T; Brenton, Zachary; Rooney, William L; Kresovich, Stephen

2017-04-01

Coordinated association and linkage mapping identified 25 grain quality QTLs in multiple environments, and fine mapping of the Wx locus supports the use of high-density genetic markers in linkage mapping. There is a wide range of end-use products made from cereal grains, and these products often demand different grain characteristics. Fortunately, cereal crop species including sorghum [Sorghum bicolor (L.) Moench] contain high phenotypic variation for traits influencing grain quality. Identifying genetic variants underlying this phenotypic variation allows plant breeders to develop genotypes with grain attributes optimized for their intended usage. Multiple sorghum mapping populations were rigorously phenotyped across two environments (SC Coastal Plain and Central TX) in 2 years for five major grain quality traits: amylose, starch, crude protein, crude fat, and gross energy. Coordinated association and linkage mapping revealed several robust QTLs that make prime targets to improve grain quality for food, feed, and fuel products. Although the amylose QTL interval spanned many megabases, the marker with greatest significance was located just 12 kb from waxy (Wx), the primary gene regulating amylose production in cereal grains. This suggests higher resolution mapping in recombinant inbred line (RIL) populations can be obtained when genotyped at a high marker density. The major QTL for crude fat content, identified in both a RIL population and grain sorghum diversity panel, encompassed the DGAT1 locus, a critical gene involved in maize lipid biosynthesis. Another QTL on chromosome 1 was consistently mapped in both RIL populations for multiple grain quality traits including starch, crude protein, and gross energy. Collectively, these genetic regions offer excellent opportunities to manipulate grain composition and set up future studies for gene validation.

Assessing Consumer Emotional Responses in the Presence and Absence of Critical Quality Attributes: A Case Study with Chicken Eggs.

PubMed

Wardy, Wisdom; Sae-Eaw, Amporn; Sriwattana, Sujinda; No, Hong Kyoon; Prinyawiwatkul, Witoon

2015-07-01

Effects of attribute presence and absence on the emotional profile and consumer acceptability of products with varying qualities were assessed using eggs as an example. An online survey (n = 320) was used to evaluate emotional responses and acceptability to 5 types of egg quality attributes: intrinsic, aesthetic, extrinsic, expediency, and wholesome/safety, for both present and absent conditions. Attribute absence rather than presence evoked greater consumer discriminating emotions associated with eggs. Mean emotion intensity elicited by the presence of all quality attributes ranged from 1.67 (intrinsic; guilty) to 4.05 (wholesome; good) versus 2.01 (wholesome; satisfied) to 3.29 (wholesome; disgusted) when absent. Key positive emotions elicited by presence of attributes were active, calm, good, interested, happy, safe, and satisfied; while dominant negative emotions elicited by absence of attributes included disgusted and worried. Wholesome quality (constituted by egg freshness, "packing/best-before-date" and absence of visible cracks) exhibited the highest liking (7.65) and emotion intensities, while the emotional responses to both the presence and absence of intrinsic quality (constituted by nutrient-fortified egg, organic egg, and USDA-certified farm egg) were similar, reflecting their dynamic effects on emotions. Emotions and acceptability were more correlated for attribute absence than presence; and good, happy, and satisfied emotions were strongly related to egg acceptability (r ≥ 0.6). Egg product/packaging design can be oriented toward emphasizing wholesome and expedient attributes, since they enhance good, safe, and satisfied emotions, while minimizing disgust, worry, and boredom. The use of emotional responses and hedonic testing regarding attribute presence and absence would allow for improved selection of attributes critical to consumer acceptance of products. Assessing effects of attribute presence compared with absence on food-evoked emotions may offer valuable insights for differentiation of competing or otherwise similar products. Affective consumer responses to food products with varying sensory and quality attributes are influenced by several factors including psychographics, demographics, product category, and test design. In this study, a scenario is depicted where product developers can identify critical product features based on emotional assessment of products with and without quality attributes. This study is beneficial to product developers and the egg industry, as it identifies opportunities to better understand consumer needs, thereby, designing products destined for success in the marketplace. © 2015 Institute of Food Technologists®

Burden attributable to child maltreatment in Australia.

PubMed

Moore, Sophie E; Scott, James G; Ferrari, Alize J; Mills, Ryan; Dunne, Michael P; Erskine, Holly E; Devries, Karen M; Degenhardt, Louisa; Vos, Theo; Whiteford, Harvey A; McCarthy, Molly; Norman, Rosana E

2015-10-01

Child maltreatment is a complex phenomenon, with four main types (childhood sexual abuse, physical abuse, emotional abuse, and neglect) highly interrelated. All types of maltreatment have been linked to adverse health consequences and exposure to multiple forms of maltreatment increases risk. In Australia to date, only burden attributable to childhood sexual abuse has been estimated. This study synthesized the national evidence and quantified the burden attributable to the four main types of child maltreatment. Meta-analyses, based on quality-effects models, generated pooled prevalence estimates for each maltreatment type. Exposure to child maltreatment was examined as a risk factor for depressive disorders, anxiety disorders and intentional self-harm using counterfactual estimation and comparative risk assessment methods. Adjustments were made for co-occurrence of multiple forms of child maltreatment. Overall, an estimated 23.5% of self-harm, 20.9% of anxiety disorders and 15.7% of depressive disorders burden in males; and 33.0% of self-harm, 30.6% of anxiety disorders and 22.8% of depressive disorders burden in females was attributable to child maltreatment. Child maltreatment was estimated to cause 1.4% (95% uncertainty interval 0.4-2.3%) of all disability-adjusted life years (DALYs) in males, and 2.4% (0.7-4.1%) of all DALYs in females in Australia in 2010. Child maltreatment contributes to a substantial proportion of burden from depressive and anxiety disorders and intentional self-harm in Australia. This study demonstrates the importance of including all forms of child maltreatment as risk factors in future burden of disease studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

A decision aid for intensity-modulated radiation-therapy plan selection in prostate cancer based on a prognostic Bayesian network and a Markov model.

PubMed

Smith, Wade P; Doctor, Jason; Meyer, Jürgen; Kalet, Ira J; Phillips, Mark H

2009-06-01

The prognosis of cancer patients treated with intensity-modulated radiation-therapy (IMRT) is inherently uncertain, depends on many decision variables, and requires that a physician balance competing objectives: maximum tumor control with minimal treatment complications. In order to better deal with the complex and multiple objective nature of the problem we have combined a prognostic probabilistic model with multi-attribute decision theory which incorporates patient preferences for outcomes. The response to IMRT for prostate cancer was modeled. A Bayesian network was used for prognosis for each treatment plan. Prognoses included predicting local tumor control, regional spread, distant metastases, and normal tissue complications resulting from treatment. A Markov model was constructed and used to calculate a quality-adjusted life-expectancy which aids in the multi-attribute decision process. Our method makes explicit the tradeoffs patients face between quality and quantity of life. This approach has advantages over current approaches because with our approach risks of health outcomes and patient preferences determine treatment decisions.

SOA: A Quality Attribute Perspective

DTIC Science & Technology

2011-06-23

in software engineering from CMU. 6June 2011 Twitter #seiwebinar © 2011 Carnegie Mellon University Agenda Service -Oriented Architecture and... Software Architecture: Review Service -Orientation and Quality Attributes Summary and Future Challenges 7June 2011 Twitter #seiwebinar © 2011...Architecture and Software Architecture: Review Service -Orientation and Quality Attributes Summary and Future Challenges Review 10June 2011 Twitter

Psychological predictors for health-related quality of life and disability in persons with chronic obstructive pulmonary disease (COPD).

PubMed

Mewes, Ricarda; Rief, Winfried; Kenn, Klaus; Ried, Jens; Stenzel, Nikola

2016-01-01

Individuals with chronic obstructive pulmonary disease (COPD) exhibit low physical and mental health-related quality of life (HRQL) and high susceptibility to disability. We investigated the influence of psychological factors on HRQL and disability in COPD individuals recruited from the general population. In line with Leventhal's common sense model, we expected psychological factors to be associated with HRQL and disability even after controlling for medical status. Individuals with COPD (n = 502; 59.7 years old; GOLD grades were I: 3%, II: 17%, III: 34%, IV: 46%) were assessed through an online survey administered via COPD patient organisations in Germany. Individuals filled in the Short Form Health Survey (SF-12), COPD Assessment Test, Patient Health Questionnaire (modules: GAD-2, PHQ-15, PHQ-9), Brief Illness Perception Questionnaire, a questionnaire that assesses causal illness attributions, and the internal illness-related locus of control scale of the 'KKG questionnaire for the assessment of control beliefs about illness and health'. Multiple linear regressions were calculated. The investigated factors explained high variances (disability = 56%, physical HRQL = 28%, mental HRQL = 63%, p ≤ .001). Better mental health, more optimistic illness perceptions, attribution to psychological causes, and stronger internal locus of control were associated with lower disability and better HRQL. Comorbid somatic symptoms contributed to high disability and low quality of life. Psychological factors, such as illness perception, attribution and internal locus of control, were associated with disability and HRQL. These factors should be considered when designing treatments for individuals with COPD, and adequate interventions should be provided to enhance illness understanding and self-management skills.

Multiple attribute decision making model and application to food safety risk evaluation.

PubMed

Ma, Lihua; Chen, Hong; Yan, Huizhe; Yang, Lifeng; Wu, Lifeng

2017-01-01

Decision making for supermarket food purchase decisions are characterized by network relationships. This paper analyzed factors that influence supermarket food selection and proposes a supplier evaluation index system based on the whole process of food production. The author established the intuitive interval value fuzzy set evaluation model based on characteristics of the network relationship among decision makers, and validated for a multiple attribute decision making case study. Thus, the proposed model provides a reliable, accurate method for multiple attribute decision making.

Validation of a Cognitive Diagnostic Model across Multiple Forms of a Reading Comprehension Assessment

ERIC Educational Resources Information Center

Clark, Amy K.

2013-01-01

The present study sought to fit a cognitive diagnostic model (CDM) across multiple forms of a passage-based reading comprehension assessment using the attribute hierarchy method. Previous research on CDMs for reading comprehension assessments served as a basis for the attributes in the hierarchy. The two attribute hierarchies were fit to data from…

Prediction of quality attributes of chicken breast fillets by using Vis/NIR spectroscopy combined with factor analysis method

USDA-ARS?s Scientific Manuscript database

Visible/near-infrared (Vis/NIR) spectroscopy with wavelength range between 400 and 2500 nm combined with factor analysis method was tested to predict quality attributes of chicken breast fillets. Quality attributes, including color (L*, a*, b*), pH, and drip loss were analyzed using factor analysis ...

Ants learn to rely on more informative attributes during decision-making.

PubMed

Sasaki, Takao; Pratt, Stephen C

2013-01-01

Evolutionary theory predicts that animals act to maximize their fitness when choosing among a set of options, such as what to eat or where to live. Making the best choice is challenging when options vary in multiple attributes, and animals have evolved a variety of heuristics to simplify the task. Many of these involve ranking or weighting attributes according to their importance. Because the importance of attributes can vary across time and place, animals might benefit by adjusting weights accordingly. Here, we show that colonies of the ant Temnothorax rugatulus use their experience during nest site selection to increase weights on more informative nest attributes. These ants choose their rock crevice nests on the basis of multiple features. After exposure to an environment where only one attribute differentiated options, colonies increased their reliance on this attribute relative to a second attribute. Although many species show experience-based changes in selectivity based on a single feature, this is the first evidence in animals for adaptive changes in the weighting of multiple attributes. These results show that animal collectives, like individuals, change decision-making strategies according to experience. We discuss how these colony-level changes might emerge from individual behaviour.

Very high resolution Earth Observation features for testing the direct and indirect effects of landscape structure on local habitat quality

NASA Astrophysics Data System (ADS)

Mairota, Paola; Cafarelli, Barbara; Labadessa, Rocco; Lovergine, Francesco P.; Tarantino, Cristina; Nagendra, Harini; Didham, Raphael K.

2015-02-01

Modelling the empirical relationships between habitat quality and species distribution patterns is the first step to understanding human impacts on biodiversity. It is important to build on this understanding to develop a broader conceptual appreciation of the influence of surrounding landscape structure on local habitat quality, across multiple spatial scales. Traditional models which report that 'habitat amount' in the landscape is sufficient to explain patterns of biodiversity, irrespective of habitat configuration or spatial variation in habitat quality at edges, implicitly treat each unit of habitat as interchangeable and ignore the high degree of interdependence between spatial components of land-use change. Here, we test the contrasting hypothesis, that local habitat units are not interchangeable in their habitat attributes, but are instead dependent on variation in surrounding habitat structure at both patch- and landscape levels. As the statistical approaches needed to implement such hierarchical causal models are observation-intensive, we utilise very high resolution (VHR) Earth Observation (EO) images to rapidly generate fine-grained measures of habitat patch internal heterogeneities over large spatial extents. We use linear mixed-effects models to test whether these remotely-sensed proxies for habitat quality were influenced by surrounding patch or landscape structure. The results demonstrate the significant influence of surrounding patch and landscape context on local habitat quality. They further indicate that such an influence can be direct, when a landscape variable alone influences the habitat structure variable, and/or indirect when the landscape and patch attributes have a conjoined effect on the response variable. We conclude that a substantial degree of interaction among spatial configuration effects is likely to be the norm in determining the ecological consequences of habitat fragmentation, thus corroborating the notion of the spatial context dependence of habitat quality.

Effects of Patient-Centered Medical Home Attributes on Patients’ Perceptions of Quality in Federally Supported Health Centers

PubMed Central

Lebrun-Harris, Lydie A.; Shi, Leiyu; Zhu, Jinsheng; Burke, Matthew T.; Sripipatana, Alek; Ngo-Metzger, Quyen

2013-01-01

PURPOSE We sought to assess patients’ ratings of patient-centered medical home (PCMH) attributes and overall quality of care within federally supported health centers. METHODS Data were collected through the 2009 Health Center Patient Survey (n = 4,562), which consisted of in-person interviews and included a nationally representative sample of patients seen in health centers. Quality measures included patients’ perceptions of overall quality of services, perceptions of quality of clinician advice/treatment, and likelihood of referring friends and relatives to the health center. PCMH attributes included (1) access to care getting to health center, (2) access to care during visit, (3) patient-centered communication with health care clinicians, (4) patient-centered communication with support staff, (5) self-management support for chronic conditions, (6) self-management support for behavioral risks, and (7) comprehensive preventive care. Bivariate analysis and logistic regressions were used to examine associations between patients’ perceptions of PCMH attributes and patient-reported quality of care. RESULTS Eighty-four percent of patients reported excellent/very good overall quality of services, 81% reported excellent/very good quality of clinician care, and 84% were very likely to refer friends and relatives. Higher patient ratings on the access to care and patient-centered communication attributes were associated with higher odds of patient-reported high quality of care on the 3 outcome measures. CONCLUSIONS More than 80% of patients perceived high quality of care in health centers. PCMH attributes related to access to care and communication were associated with greater likelihood of patients reporting high-quality care. PMID:24218374

Analysis of information quality attribute for SME towards adoption of research result

NASA Astrophysics Data System (ADS)

Febriani, E.; Dewobroto, W. S.; Anggraini, R. D.

2017-12-01

Small and Medium Enterprises (SME) holds significant role in fostering Indonesian economy. However, the research that is supposed to support the development of SMEs business has not yet fully adopted or utilized. Information attributes may be used as the benchmark to find the intention of SMEs from a research result and develop the strategy of quality information for all organizations both SMEs and the researcher. Therefore, because of the importance of information quality attribute required by SMEs, the research aims to analyses the information quality required by SMEs to clarify the information quality into the dimension of information quality. The research was started by distributing online questionnaire to SMEs. The questionnaire result showed that the content dimension is the most aspect required by SMEs, followed by time and form dimension, respectively. Quality information attribute required by SMEs from a research is that the result may be applied to the business.

Impact of service attributes on customer satisfaction and loyalty in a healthcare context.

PubMed

Lonial, Subash; Raju, P S

2015-01-01

The purpose of this paper is to examine the role of perceived service attributes in the development of overall customer satisfaction (OCS) and customer loyalty (CL) in a health-care setting. This paper also sheds light on the role of hospitalist physicians (HPs) and offers suggestions to improve patient satisfaction and loyalty. A telephone survey was used to collect data from recently hospitalized patients with respect to their HP. Structural equations modeling (SEM) was used to confirm the overall relationships between perceived service quality (PSQ), OCS and CL. The sample was then divided into customer relationship groups (CRGs) based on satisfaction and loyalty measures. Discriminant analysis was used to determine which attributes differentiated most between high and low satisfaction and loyalty groups. Overall relationships among PSQ, OCS and CL were in conformity with the conceptual model. Findings also revealed that service attributes played an important role in distinguishing between high and low satisfaction and loyalty groups, although some attributes were more important than others and different attributes emerged as being key influencers for satisfaction and loyalty. The conceptual model used is a fairly straight forward model, and we have not considered the impact of individual factors such as expectations and value perceptions or involvement levels and demographic characteristics on service quality and overall satisfaction. The data for this study were provided by a major health maintenance organization (HMO), and there is room for improvement in the manner in which certain constructs were measured. For example, OCS, recommendation and retention all used single item measures, and it might have been preferable to use multiple item measures for these constructs. The study shows that organizations can benefit by identifying and focusing on critical attributes as part of their customer relationship management program. The SEM results provide strong support for the overall model linking service quality, OCS and CL in a health-care setting. As one would expect, PSQ has a strong impact on OCS, which, in turn, has a fairly strong impact on CL. However, there is also a significant direct linkage between PSQ and CL. This linkage shows that at least a certain portion of CL could evolve independent of the satisfaction level with the HP. This shows that, in addition to trying to improve satisfaction, organizations should also explore influencing loyalty directly, perhaps by the strategic use of service attribute perceptions. The study shows that customer perceptions at the service attribute level can often be the key to the generation and management of customer satisfaction and loyalty. It also has significance for how satisfaction and loyalty with HPs can be improved in a hospital setting.

Attributes of quality in audiovisual materials for health professionals.

PubMed

Suter, E; Waddell, W H

1981-07-01

Utilizing a series of meetings and incorporating individual efforts of producers, evaluators, and users of audiovisual materials; an attempt has been made to define the quality of an instructional item. Attributes of quality in content, instructional design, technical production, and packaging of audiovisual materials are addressed through questions about general criteria that permit expression of individual dictates off creativity and taste. These attributes of quality are intended for use by the producers and evaluators of audiovisual instruction.

Comparison of preferences of healthcare professionals and MS patients for attributes of disease-modifying drugs: A best-worst scaling.

PubMed

Kremer, Ingrid E H; Evers, Silvia M A A; Jongen, Peter J; Hiligsmann, Mickaël

2018-02-01

The choice between disease-modifying drugs (DMDs) for the treatment of multiple sclerosis (MS) becomes more often a shared decision between the patient and the neurologist and MS nurse. This study aimed to assess which DMD attributes are most important for the healthcare professionals in selecting a DMD for a patient. Subsequently, within this perspective, the neurologists' and nurses' perspectives were compared. Lastly, the healthcare professionals' perspective was compared with the patients' perspective to detect any differences that may need attention in the communication about DMDs. A best-worst scaling (BWS) was conducted among 27 neurologists and 33 MS nurses treating patients with MS to determine the importance of 27 DMD attributes. These attributes were identified through three focus groups with MS patients in a previous study (N=19). Relative importance scores (RISs) were estimated for each attribute. Multivariable linear regression analyses were used to compare the different perspectives. According to the neurologists and nurses, safety of the DMD was the most important DMD attribute in the treatment decision, closely followed by effect on disability progression, quality of life and relapse rate. Patients with MS agreed with the importance of the last three attributes, but valued safety significantly lower (b=-2.59, P<.001). This study suggests that, overall, neurologists and nurses regard the same DMD attributes as important as MS patients with the notable exception of safety. This study provides valuable information for the development of interventions to support shared decision making and highlights which attributes of DMDs may need additional attention. © 2017 The Authors Health Expectations Published by John Wiley & Sons Ltd.

Bayesian framework inspired no-reference region-of-interest quality measure for brain MRI images

PubMed Central

Osadebey, Michael; Pedersen, Marius; Arnold, Douglas; Wendel-Mitoraj, Katrina

2017-01-01

Abstract. We describe a postacquisition, attribute-based quality assessment method for brain magnetic resonance imaging (MRI) images. It is based on the application of Bayes theory to the relationship between entropy and image quality attributes. The entropy feature image of a slice is segmented into low- and high-entropy regions. For each entropy region, there are three separate observations of contrast, standard deviation, and sharpness quality attributes. A quality index for a quality attribute is the posterior probability of an entropy region given any corresponding region in a feature image where quality attribute is observed. Prior belief in each entropy region is determined from normalized total clique potential (TCP) energy of the slice. For TCP below the predefined threshold, the prior probability for a region is determined by deviation of its percentage composition in the slice from a standard normal distribution built from 250 MRI volume data provided by Alzheimer’s Disease Neuroimaging Initiative. For TCP above the threshold, the prior is computed using a mathematical model that describes the TCP–noise level relationship in brain MRI images. Our proposed method assesses the image quality of each entropy region and the global image. Experimental results demonstrate good correlation with subjective opinions of radiologists for different types and levels of quality distortions. PMID:28630885

Approaches to Quality Risk Management When Using Single-Use Systems in the Manufacture of Biologics.

PubMed

Ishii-Watabe, Akiko; Hirose, Akihiko; Katori, Noriko; Hashii, Norikata; Arai, Susumu; Awatsu, Hirotoshi; Eiza, Akira; Hara, Yoshiaki; Hattori, Hideshi; Inoue, Tomomi; Isono, Tetsuya; Iwakura, Masahiro; Kajihara, Daisuke; Kasahara, Nobuo; Matsuda, Hiroyuki; Murakami, Sei; Nakagawa, Taishiro; Okumura, Takehiro; Omasa, Takeshi; Takuma, Shinya; Terashima, Iyo; Tsukahara, Masayoshi; Tsutsui, Maiko; Yano, Takahiro; Kawasaki, Nana

2015-10-01

Biologics manufacturing technology has made great progress in the last decade. One of the most promising new technologies is the single-use system, which has improved the efficiency of biologics manufacturing processes. To ensure safety of biologics when employing such single-use systems in the manufacturing process, various issues need to be considered including possible extractables/leachables and particles arising from the components used in single-use systems. Japanese pharmaceutical manufacturers, together with single-use suppliers, members of the academia and regulatory authorities have discussed the risks of using single-use systems and established control strategies for the quality assurance of biologics. In this study, we describe approaches for quality risk management when employing single-use systems in the manufacturing of biologics. We consider the potential impact of impurities related to single-use components on drug safety and the potential impact of the single-use system on other critical quality attributes as well as the stable supply of biologics. We also suggest a risk-mitigating strategy combining multiple control methods which includes the selection of appropriate single-use components, their inspections upon receipt and before releasing for use and qualification of single-use systems. Communication between suppliers of single-use systems and the users, as well as change controls in the facilities both of suppliers and users, are also important in risk-mitigating strategies. Implementing these control strategies can mitigate the risks attributed to the use of single-use systems. This study will be useful in promoting the development of biologics as well as in ensuring their safety, quality and stable supply.

A scheme of hidden-structure attribute-based encryption with multiple authorities

NASA Astrophysics Data System (ADS)

Ling, J.; Weng, A. X.

2018-05-01

In the most of the CP-ABE schemes with hidden access structure, both all the user attributes and the key generation are managed by only one authority. The key generation efficiency will decrease as the number of user increases, and the data will encounter security issues as the only authority is attacked. We proposed a scheme of hidden-structure attribute-based encryption with multiple authorities, which introduces multiple semi-trusted attribute authorities, avoiding the threat even though one or more authorities are attacked. We also realized user revocation by managing a revocation list. Based on DBDH assumption, we proved that our scheme is of IND-CMA security. The analysis shows that our scheme improves the key generation efficiency.

[Real-time detection of quality of Chinese materia medica: strategy of NIR model evaluation].

PubMed

Wu, Zhi-sheng; Shi, Xin-yuan; Xu, Bing; Dai, Xing-xing; Qiao, Yan-jiang

2015-07-01

The definition of critical quality attributes of Chinese materia medica ( CMM) was put forward based on the top-level design concept. Nowadays, coupled with the development of rapid analytical science, rapid assessment of critical quality attributes of CMM was firstly carried out, which was the secondary discipline branch of CMM. Taking near infrared (NIR) spectroscopy as an example, which is a rapid analytical technology in pharmaceutical process over the past decade, systematic review is the chemometric parameters in NIR model evaluation. According to the characteristics of complexity of CMM and trace components analysis, a multi-source information fusion strategy of NIR model was developed for assessment of critical quality attributes of CMM. The strategy has provided guideline for NIR reliable analysis in critical quality attributes of CMM.

Study of Laser Drilled Hole Quality of Yttria Stabilized Zirconia

NASA Astrophysics Data System (ADS)

Saini, Surendra K.; Dubey, Avanish K.; Pant, Piyush; Upadhyay, B. N.; Choubey, A.

2017-09-01

The Yttria Stabilized Zirconia ceramic is extensively used in aerospace, automotives, medical and microelectronics industries. These applications demand manufacturing of different macro and micro features with close tolerances in this material. To make miniature holes with accurate dimensions in advanced ceramics such as Yttria Stabilized Zirconia is very difficult due to its tailored attributes such as high toughness, hardness, strength, resistance to wear, corrosion and temperature. Due to inherent characteristics of laser drilling, researchers are working to fulfill the requirement of creation of micro holes in advanced ceramics. The present research investigates the laser drilling of 2 mm thick Yttria Stabilized Zirconia with the aim to achieve good micro holes with reduced geometrical inaccuracies and improved hole quality. The results show that multiple quality response comprising hole circularity, hole taper and recast layer thickness has been improved at optimally selected process parameters.

Content analysis of resident evaluations of faculty anesthesiologists: supervision encompasses some attributes of the professionalism core competency.

PubMed

Dexter, Franklin; Szeluga, Debra; Hindman, Bradley J

2017-05-01

Anesthesiology departments need an instrument with which to assess practicing anesthesiologists' professionalism. The purpose of this retrospective analysis of the content of a cohort of resident evaluations of faculty anesthesiologists was to investigate the relationship between a clinical supervision scale and the multiple attributes of professionalism. From July 1, 2013 to the present, our department has utilized the de Oliveira Filho unidimensional nine-item supervision scale to assess the quality of clinical supervision of residents provided by our anesthesiologists. The "cohort" we examined included all 13,664 resident evaluations of all faculty anesthesiologists from July 1, 2013 through December 31, 2015, including 1,387 accompanying comments. Words and phrases associated with the core competency of professionalism were obtained from previous studies, and the supervision scale was analyzed for the presence of these words and phrases. The supervision scale assesses some attributes of anesthesiologists' professionalism as well as patient care and procedural skills and interpersonal and communication skills. The comments that residents provided with the below-average supervision scores included attributes of professionalism, although numerous words and phrases related to professionalism were not present in any of the residents' comments. The de Oliveira Filho clinical supervision scale includes some attributes of anesthesiologists' professionalism. The core competency of professionalism, however, is multidimensional, and the supervision scale and/or residents' comments did not address many of the other established attributes of professionalism.

A discrete-choice experiment to determine patient preferences for injectable multiple sclerosis treatments in Germany.

PubMed

Poulos, Christine; Kinter, Elizabeth; Yang, Jui-Chen; Bridges, John F P; Posner, Joshua; Gleißner, Erika; Mühlbacher, Axel; Kieseier, Bernd

2016-03-01

The aim of this study was to assess the relative importance of features of a hypothetical injectable disease-modifying treatment for patients with multiple sclerosis using a discrete-choice experiment. German residents at least 18 years of age with a self-reported physician diagnosis of multiple sclerosis completed a 25-30 minute online discrete-choice experiment. Patients were asked to choose one of two hypothetical injectable treatments for multiple sclerosis, defined by different levels of six attributes (disability progression, the number of relapses in the next 4 years, injection time, frequency of injections, presence of flu-like symptoms, and presence of injection-site reactions). The data were analyzed using a random-parameters logit model. Of 202 adults who completed the survey, results from 189 were used in the analysis. Approximately 50% of all patients reported a diagnosis of relapsing-remitting multiple sclerosis, and 31% reported secondary progressive multiple sclerosis. Approximately 71% of patients had current or prior experience with injectable multiple sclerosis medication. Approximately 53% had experienced flu-like symptoms caused by their medication, and 47% had experienced mild injection-site reactions. At least one significant difference was seen between levels in all attributes, except injection time. The greatest change in relative importance between levels of an attribute was years until symptoms get worse from 1 to 4 years. The magnitude of this difference was about twice that of relapses in the next 4 years, frequency of injections, and flu-like symptoms. Most attributes examined in this experiment had an influence on patient preference. Patients placed a significant value on improvements in the frequency of dosing and disability progression. Results suggest that changes in injection frequency can be as important as changes in efficacy and safety attributes. Understanding which attributes of injectable therapies influence patient preference could potentially improve outcomes and adherence in patients with multiple sclerosis.

Strain-compensated (Ga,In)N/(Al,Ga)N/GaN multiple quantum wells for improved yellow/amber light emission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lekhal, K.; Damilano, B., E-mail: bd@crhea.cnrs.fr; De Mierry, P.

2015-04-06

Yellow/amber (570–600 nm) emitting In{sub x}Ga{sub 1−x}N/Al{sub y}Ga{sub 1−y}N/GaN multiple quantum wells (QWs) have been grown by metal organic chemical vapor deposition on GaN-on- sapphire templates. When the (Al,Ga)N thickness of the barrier increases, the room temperature photoluminescence is red-shifted while its yield increases. This is attributed to an increase of the QW internal electric field and an improvement of the material quality due to the compensation of the compressive strain of the In{sub x}Ga{sub 1−x}N QWs by the Al{sub y}Ga{sub 1−y}N layers, respectively.

The Attributive Theory of Quality: A Model for Quality Measurement in Higher Education.

ERIC Educational Resources Information Center

Afshar, Arash

A theoretical basis for defining and measuring the quality of institutions of higher education, namely for accreditation purposes, is developed. The theory, the Attributive Theory of Quality, is illustrated using a calculation model that is based on general systems theory. The theory postulates that quality only exists in relation to the…

Optimization of a micro-scale, high throughput process development tool and the demonstration of comparable process performance and product quality with biopharmaceutical manufacturing processes.

PubMed

Evans, Steven T; Stewart, Kevin D; Afdahl, Chris; Patel, Rohan; Newell, Kelcy J

2017-07-14

In this paper, we discuss the optimization and implementation of a high throughput process development (HTPD) tool that utilizes commercially available micro-liter sized column technology for the purification of multiple clinically significant monoclonal antibodies. Chromatographic profiles generated using this optimized tool are shown to overlay with comparable profiles from the conventional bench-scale and clinical manufacturing scale. Further, all product quality attributes measured are comparable across scales for the mAb purifications. In addition to supporting chromatography process development efforts (e.g., optimization screening), comparable product quality results at all scales makes this tool is an appropriate scale model to enable purification and product quality comparisons of HTPD bioreactors conditions. The ability to perform up to 8 chromatography purifications in parallel with reduced material requirements per run creates opportunities for gathering more process knowledge in less time. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Hesitant triangular fuzzy information aggregation operators based on Bonferroni means and their application to multiple attribute decision making.

PubMed

Wang, Chunyong; Li, Qingguo; Zhou, Xiaoqiang; Yang, Tian

2014-01-01

We investigate the multiple attribute decision-making (MADM) problems with hesitant triangular fuzzy information. Firstly, definition and some operational laws of hesitant triangular fuzzy elements are introduced. Then, we develop some hesitant triangular fuzzy aggregation operators based on Bonferroni means and discuss their basic properties. Some existing operators can be viewed as their special cases. Next, we apply the proposed operators to deal with multiple attribute decision-making problems under hesitant triangular fuzzy environment. Finally, an illustrative example is given to show the developed method and demonstrate its practicality and effectiveness.

Hesitant Triangular Fuzzy Information Aggregation Operators Based on Bonferroni Means and Their Application to Multiple Attribute Decision Making

PubMed Central

Zhou, Xiaoqiang; Yang, Tian

2014-01-01

We investigate the multiple attribute decision-making (MADM) problems with hesitant triangular fuzzy information. Firstly, definition and some operational laws of hesitant triangular fuzzy elements are introduced. Then, we develop some hesitant triangular fuzzy aggregation operators based on Bonferroni means and discuss their basic properties. Some existing operators can be viewed as their special cases. Next, we apply the proposed operators to deal with multiple attribute decision-making problems under hesitant triangular fuzzy environment. Finally, an illustrative example is given to show the developed method and demonstrate its practicality and effectiveness. PMID:25140338

Biological interaction between sleep quality and depression in type 2 diabetes.

PubMed

Zhao, J; Li, X-L; Han, K; Tao, Z-Q; Wu, Z-M

2016-07-01

To explore the interaction of sleep quality and depression among patients with type 2 diabetes mellitus (T2DM). With multistage cluster sampling, the living quality of all participants was investigated. The indicator of interaction was calculated according to the delta method and non-conditional logistic regression model. There were 944 residents involved in the final analysis including 365 males and 579 females. The average age was (64 ± 10.2) years. The rate of poor sleep quality and poor sleep quality combined depression were 33.6% and 40.1%, respectively. Due to poor sleep quality and depression in patients with T2DM, the combined interaction index was 2.48 (95% CI 1.44-4.29), the relative excess risk was 3.42 (95% CI 2.16-4.67), and the attributable proportion was 0.51 (95% CI 0.32-0.70). An additive interaction rather than a multiplicative interaction of poor sleep quality and depression in affecting the quality of life was found in T2DM patients. When both factors existed at the same time, the interaction effect of these 2 factors was greater than the sum of the two factors.

Practical Approaches to Quality Improvement for Radiologists.

PubMed

Kelly, Aine Marie; Cronin, Paul

2015-10-01

Continuous quality improvement is a fundamental attribute of high-performing health care systems. Quality improvement is an essential component of health care, with the current emphasis on adding value. It is also a regulatory requirement, with reimbursements increasingly being linked to practice performance metrics. Practice quality improvement efforts must be demonstrated for credentialing purposes and for certification of radiologists in practice. Continuous quality improvement must occur for radiologists to remain competitive in an increasingly diverse health care market. This review provides an introduction to the main approaches available to undertake practice quality improvement, which will be useful for busy radiologists. Quality improvement plays multiple roles in radiology services, including ensuring and improving patient safety, providing a framework for implementing and improving processes to increase efficiency and reduce waste, analyzing and depicting performance data, monitoring performance and implementing change, enabling personnel assessment and development through continued education, and optimizing customer service and patient outcomes. The quality improvement approaches and underlying principles overlap, which is not surprising given that they all align with good patient care. The application of these principles to radiology practices not only benefits patients but also enhances practice performance through promotion of teamwork and achievement of goals. © RSNA, 2015.

Engineering Quality Software: 10 Recommendations for Improved Software Quality Management

DTIC Science & Technology

2010-04-27

lack of user involvement • Inadequate Software Process Management & Control By Contractors • No “Team” of Vendors and users; little SME participation...1990 Quality Perspectives • Process Quality ( CMMI ) • Product Quality (ISO/IEC 2500x) – Internal Quality Attributes – External Quality Attributes... CMMI /ISO 9000 Assessments – Capture organizational knowledge • Identify best practices, lessons learned Know where you are, and where you need to be

'She believed in me'. What patients with depression value in their relationship with practitioners. A secondary analysis of multiple qualitative data sets.

PubMed

Percival, John; Donovan, Jenny; Kessler, David; Turner, Katrina

2017-02-01

Clinical guidance promotes the practitioner-patient relationship as integral to good quality person-centred care for patients with depression. However, patients can struggle to engage with practitioners and practitioners have indicated that they want more guidance on how to establish effective relationships with their patients. To identify what practitioner attributes patients with depression particularly value or find problematic. A secondary analysis of data collected during four qualitative studies, all of which entailed interviewing patients diagnosed with depression about their treatment experiences. Patients in the four studies had received different treatments. These included antidepressants, cognitive behaviour therapy, facilitated physical activity and listening visits. We thematically analysed 32 patient accounts. We identified two complimentary sets of important practitioner attributes: the first based on the practitioner's bearing; the second based on the practitioner's enabling role. We found that patients value practitioners who consider their individual manner, share relevant personal information, show interest and acceptance, communicate clearly and listen carefully, collaborate on manageable goals and sanction greater patient self-care and self-compassion. It was also evident that patients receiving different treatments value the same practitioner attributes and that when these key practitioner qualities were not evident, patients were liable not to re-attend or comply with treatment. The practitioner attributes that patients with depression most value have a positive impact on their engagement with treatment. Patients emphasise the importance of a practitioner's demeanour and encouragement, rather than the amount of time or specific treatment a practitioner is able to provide. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

Humanizing Outgroups Through Multiple Categorization

PubMed Central

Prati, Francesca; Crisp, Richard J.; Meleady, Rose; Rubini, Monica

2016-01-01

In three studies, we examined the impact of multiple categorization on intergroup dehumanization. Study 1 showed that perceiving members of a rival university along multiple versus simple categorical dimensions enhanced the tendency to attribute human traits to this group. Study 2 showed that multiple versus simple categorization of immigrants increased the attribution of uniquely human emotions to them. This effect was explained by the sequential mediation of increased individuation of the outgroup and reduced outgroup threat. Study 3 replicated this sequential mediation model and introduced a novel way of measuring humanization in which participants generated attributes corresponding to the outgroup in a free response format. Participants generated more uniquely human traits in the multiple versus simple categorization conditions. We discuss the theoretical implications of these findings and consider their role in informing and improving efforts to ameliorate contemporary forms of intergroup discrimination. PMID:26984016

Attributes of quality programs in universities in developing countries: Case studies of two private universities in Ecuador and beyond

NASA Astrophysics Data System (ADS)

Uriguen, Monica I.

This study sought to identify the key attributes of high-quality programs with an eye toward helping developing countries such as Ecuador advance program quality. The dissertation is divided into five chapters: (1) introduction to high-quality programs; (2) literature review of attributes of high-quality programs; (3) grounded theory method (including interviews with 60 individuals) used to identify program attributes that enhance student learning; (4) findings; and (5) conclusions and recommendations. Following are the five clusters and thirteen attributes of high-quality programs that I identified: Cluster One: Highly Qualified Participants: (1) Highly Qualified Faculty, and (2) Highly Qualified Students; Cluster Two: Learning-Centered Cultures: (3) Shared Program Direction Focused on Learning, (4) Real-World Learning Experiences, (5) Reading-Centered Culture, and (6) Supportive and Risk-Taking Environment; Cluster Three: Interactive Teaching and Learning: (7) Integrative learning: Theory with Practice, Self with Subject, and (8) Exclusive Tutoring and Mentoring; Cluster Four: Connected Program Requirements: (9) Planned Breadth and Depth Course Work, and (10) Tangible Products; and Cluster Five: Adequate Resources: (11) Support for Students, (12) Support for Faculty, and (13) Support for Campus Infrastructure. The study was guided by Haworth and Conrad's (1997) "Engagement Theory of High-Quality Programs." Eleven of the attributes of high-quality programs are closely connected to Haworth and Conrad's theory and the other two attributes---real-world learning experiences and a reading-centered culture---make the signature theoretical contributions of the study. Real-world learning experiences encourage the active involvement of stakeholders in designing curricula with real-world learning experiences. The second attribute---a reading-centered culture---has never before been identified in the literature. There are four key differences between Haworth and Conrad's theory and the theory developed in this study. This study identified four attributes that are highly important in Ecuador and, possibly, other developing countries: highly-qualified faculty, highly-qualified students, reading-centered cultures, and real-world learning experiences. If Latin American universities implement the recommendations proposed in the study, particularly Ecuadorian universities, there is a foundation for envisioning a better future for Ecuadorian universities.

Cancer patients' perceptions of quality-of-care attributes-Associations with age, perceived health status, gender and education.

PubMed

Suhonen, Riitta; Stolt, Minna; Berg, Agneta; Katajisto, Jouko; Lemonidou, Chryssoula; Patiraki, Elisabeth; Sjövall, Katarina; Charalambous, Andreas

2018-01-01

The aim of this study was to explore the associations between patients' gender, education, health status in relation to assessments of patient-centred quality and individuality in care and trust in nurses for those <65 (working age) and ≥65 years (older people). Patients' assessments of the quality of care they receive are essential for the development of the provision of patient care and services. Previous studies have revealed age of the patient is associated with their assessment of care quality attributes. The study employed a cross-sectional, multicultural comparative survey design. The data were collected using questionnaires among hospitalised cancer patients (N = 876, n = 599, 68%) in four European countries: Greece, Cyprus, Sweden and Finland. The data were divided into two subgroups based on age (cut point 65 years) and were analysed statistically. Cancer patients' age, gender and level of education were not related to their assessments of care quality attributes: person-centred care quality, individuality in care and trust in nurses. Subgroup analysis of the older adults and those of working age showed clear associations with patients' assessments of quality-of-care attributes and perceived health status. The lower the perceived health status, the lower the assessment of care quality attributes. The results suggest that the cancer itself is the strongest determinant of the care delivered, rather than any patient characteristics, such as age, education or gender. Perceived health status, in association with cancer patient assessments of care quality attributes, may be useful in the development of patient-centred, individualised care strategies alongside a stronger focus on people instead of cancer-care-related processes and duties. Health status was the only factor associated with cancer patients' assessments of care quality attributes. Cancer itself may be the strongest determinant of the care quality perceptions, rather than any patient characteristics. The findings of this study have implications for cancer care professionals in terms of patient assessment and care planning. The measures may be useful in assessing quality of cancer nursing care. © 2017 John Wiley & Sons Ltd.

Hyperspectral Imaging for Predicting the Internal Quality of Kiwifruits Based on Variable Selection Algorithms and Chemometric Models.

PubMed

Zhu, Hongyan; Chu, Bingquan; Fan, Yangyang; Tao, Xiaoya; Yin, Wenxin; He, Yong

2017-08-10

We investigated the feasibility and potentiality of determining firmness, soluble solids content (SSC), and pH in kiwifruits using hyperspectral imaging, combined with variable selection methods and calibration models. The images were acquired by a push-broom hyperspectral reflectance imaging system covering two spectral ranges. Weighted regression coefficients (BW), successive projections algorithm (SPA) and genetic algorithm-partial least square (GAPLS) were compared and evaluated for the selection of effective wavelengths. Moreover, multiple linear regression (MLR), partial least squares regression and least squares support vector machine (LS-SVM) were developed to predict quality attributes quantitatively using effective wavelengths. The established models, particularly SPA-MLR, SPA-LS-SVM and GAPLS-LS-SVM, performed well. The SPA-MLR models for firmness (R pre  = 0.9812, RPD = 5.17) and SSC (R pre  = 0.9523, RPD = 3.26) at 380-1023 nm showed excellent performance, whereas GAPLS-LS-SVM was the optimal model at 874-1734 nm for predicting pH (R pre  = 0.9070, RPD = 2.60). Image processing algorithms were developed to transfer the predictive model in every pixel to generate prediction maps that visualize the spatial distribution of firmness and SSC. Hence, the results clearly demonstrated that hyperspectral imaging has the potential as a fast and non-invasive method to predict the quality attributes of kiwifruits.

Quality Improvement in Virtual Higher Education: A Grounded Theory Approach

ERIC Educational Resources Information Center

Mahdiuon, Rouhollah; Masoumi, Davoud; Farasatkhah, Maghsoud

2017-01-01

The article aims to explore the attributes of quality and quality improvement including the process and specific actions associated with these attributes--that contribute enhancing quality in Iranian Virtual Higher Education (VHE) institutions. A total of 16 interviews were conducted with experts and key actors in Iranian virtual higher education.…

A New Look at Data Usage by Using Metadata Attributes as Indicators of Data Quality

NASA Technical Reports Server (NTRS)

Won, Young-In; Wanchoo, Lalit; Behnke, Jeanne

2016-01-01

This study reviews the key metrics (users, distributed volume, and files) in multiple ways to gain an understanding of the significance of the metadata. Characterizing the usability of data by key metadata elements, such as discipline and study area, will assist in understanding how the user needs have evolved over time. The data usage pattern based on product level provides insight into the level of data quality. In addition, the data metrics by various services, such as the Open-source Project for a Network Data Access Protocol (OPeNDAP) and subsets, address how these services have extended the usage of data. Over-all, this study presents the usage of data and metadata by metrics analyses, which may assist data centers in better supporting the needs of the users.

Semantic layers for illustrative volume rendering.

PubMed

Rautek, Peter; Bruckner, Stefan; Gröller, Eduard

2007-01-01

Direct volume rendering techniques map volumetric attributes (e.g., density, gradient magnitude, etc.) to visual styles. Commonly this mapping is specified by a transfer function. The specification of transfer functions is a complex task and requires expert knowledge about the underlying rendering technique. In the case of multiple volumetric attributes and multiple visual styles the specification of the multi-dimensional transfer function becomes more challenging and non-intuitive. We present a novel methodology for the specification of a mapping from several volumetric attributes to multiple illustrative visual styles. We introduce semantic layers that allow a domain expert to specify the mapping in the natural language of the domain. A semantic layer defines the mapping of volumetric attributes to one visual style. Volumetric attributes and visual styles are represented as fuzzy sets. The mapping is specified by rules that are evaluated with fuzzy logic arithmetics. The user specifies the fuzzy sets and the rules without special knowledge about the underlying rendering technique. Semantic layers allow for a linguistic specification of the mapping from attributes to visual styles replacing the traditional transfer function specification.

Heterogeneous Face Attribute Estimation: A Deep Multi-Task Learning Approach.

PubMed

Han, Hu; K Jain, Anil; Shan, Shiguang; Chen, Xilin

2017-08-10

Face attribute estimation has many potential applications in video surveillance, face retrieval, and social media. While a number of methods have been proposed for face attribute estimation, most of them did not explicitly consider the attribute correlation and heterogeneity (e.g., ordinal vs. nominal and holistic vs. local) during feature representation learning. In this paper, we present a Deep Multi-Task Learning (DMTL) approach to jointly estimate multiple heterogeneous attributes from a single face image. In DMTL, we tackle attribute correlation and heterogeneity with convolutional neural networks (CNNs) consisting of shared feature learning for all the attributes, and category-specific feature learning for heterogeneous attributes. We also introduce an unconstrained face database (LFW+), an extension of public-domain LFW, with heterogeneous demographic attributes (age, gender, and race) obtained via crowdsourcing. Experimental results on benchmarks with multiple face attributes (MORPH II, LFW+, CelebA, LFWA, and FotW) show that the proposed approach has superior performance compared to state of the art. Finally, evaluations on a public-domain face database (LAP) with a single attribute show that the proposed approach has excellent generalization ability.

A review of data quality assessment methods for public health information systems.

PubMed

Chen, Hong; Hailey, David; Wang, Ning; Yu, Ping

2014-05-14

High quality data and effective data quality assessment are required for accurately evaluating the impact of public health interventions and measuring public health outcomes. Data, data use, and data collection process, as the three dimensions of data quality, all need to be assessed for overall data quality assessment. We reviewed current data quality assessment methods. The relevant study was identified in major databases and well-known institutional websites. We found the dimension of data was most frequently assessed. Completeness, accuracy, and timeliness were the three most-used attributes among a total of 49 attributes of data quality. The major quantitative assessment methods were descriptive surveys and data audits, whereas the common qualitative assessment methods were interview and documentation review. The limitations of the reviewed studies included inattentiveness to data use and data collection process, inconsistency in the definition of attributes of data quality, failure to address data users' concerns and a lack of systematic procedures in data quality assessment. This review study is limited by the coverage of the databases and the breadth of public health information systems. Further research could develop consistent data quality definitions and attributes. More research efforts should be given to assess the quality of data use and the quality of data collection process.

A Review of Data Quality Assessment Methods for Public Health Information Systems

PubMed Central

Chen, Hong; Hailey, David; Wang, Ning; Yu, Ping

2014-01-01

High quality data and effective data quality assessment are required for accurately evaluating the impact of public health interventions and measuring public health outcomes. Data, data use, and data collection process, as the three dimensions of data quality, all need to be assessed for overall data quality assessment. We reviewed current data quality assessment methods. The relevant study was identified in major databases and well-known institutional websites. We found the dimension of data was most frequently assessed. Completeness, accuracy, and timeliness were the three most-used attributes among a total of 49 attributes of data quality. The major quantitative assessment methods were descriptive surveys and data audits, whereas the common qualitative assessment methods were interview and documentation review. The limitations of the reviewed studies included inattentiveness to data use and data collection process, inconsistency in the definition of attributes of data quality, failure to address data users’ concerns and a lack of systematic procedures in data quality assessment. This review study is limited by the coverage of the databases and the breadth of public health information systems. Further research could develop consistent data quality definitions and attributes. More research efforts should be given to assess the quality of data use and the quality of data collection process. PMID:24830450

Fermentanomics: Relating quality attributes of a monoclonal antibody to cell culture process variables and raw materials using multivariate data analysis.

PubMed

Rathore, Anurag S; Kumar Singh, Sumit; Pathak, Mili; Read, Erik K; Brorson, Kurt A; Agarabi, Cyrus D; Khan, Mansoor

2015-01-01

Fermentanomics is an emerging field of research and involves understanding the underlying controlled process variables and their effect on process yield and product quality. Although major advancements have occurred in process analytics over the past two decades, accurate real-time measurement of significant quality attributes for a biotech product during production culture is still not feasible. Researchers have used an amalgam of process models and analytical measurements for monitoring and process control during production. This article focuses on using multivariate data analysis as a tool for monitoring the internal bioreactor dynamics, the metabolic state of the cell, and interactions among them during culture. Quality attributes of the monoclonal antibody product that were monitored include glycosylation profile of the final product along with process attributes, such as viable cell density and level of antibody expression. These were related to process variables, raw materials components of the chemically defined hybridoma media, concentration of metabolites formed during the course of the culture, aeration-related parameters, and supplemented raw materials such as glucose, methionine, threonine, tryptophan, and tyrosine. This article demonstrates the utility of multivariate data analysis for correlating the product quality attributes (especially glycosylation) to process variables and raw materials (especially amino acid supplements in cell culture media). The proposed approach can be applied for process optimization to increase product expression, improve consistency of product quality, and target the desired quality attribute profile. © 2015 American Institute of Chemical Engineers.

Water Quality Assessment in the Harbin Reach of the Songhuajiang River (China) Based on a Fuzzy Rough Set and an Attribute Recognition Theoretical Model

PubMed Central

An, Yan; Zou, Zhihong; Li, Ranran

2014-01-01

A large number of parameters are acquired during practical water quality monitoring. If all the parameters are used in water quality assessment, the computational complexity will definitely increase. In order to reduce the input space dimensions, a fuzzy rough set was introduced to perform attribute reduction. Then, an attribute recognition theoretical model and entropy method were combined to assess water quality in the Harbin reach of the Songhuajiang River in China. A dataset consisting of ten parameters was collected from January to October in 2012. Fuzzy rough set was applied to reduce the ten parameters to four parameters: BOD5, NH3-N, TP, and F. coli (Reduct A). Considering that DO is a usual parameter in water quality assessment, another reduct, including DO, BOD5, NH3-N, TP, TN, F, and F. coli (Reduct B), was obtained. The assessment results of Reduct B show a good consistency with those of Reduct A, and this means that DO is not always necessary to assess water quality. The results with attribute reduction are not exactly the same as those without attribute reduction, which can be attributed to the α value decided by subjective experience. The assessment results gained by the fuzzy rough set obviously reduce computational complexity, and are acceptable and reliable. The model proposed in this paper enhances the water quality assessment system. PMID:24675643

Non-linear assessment and deficiency of linear relationship for healthcare industry

NASA Astrophysics Data System (ADS)

Nordin, N.; Abdullah, M. M. A. B.; Razak, R. C.

2017-09-01

This paper presents the development of the non-linear service satisfaction model that assumes patients are not necessarily satisfied or dissatisfied with good or poor service delivery. With that, compliment and compliant assessment is considered, simultaneously. Non-linear service satisfaction instrument called Kano-Q and Kano-SS is developed based on Kano model and Theory of Quality Attributes (TQA) to define the unexpected, hidden and unspoken patient satisfaction and dissatisfaction into service quality attribute. A new Kano-Q and Kano-SS algorithm for quality attribute assessment is developed based satisfaction impact theories and found instrumentally fit the reliability and validity test. The results were also validated based on standard Kano model procedure before Kano model and Quality Function Deployment (QFD) is integrated for patient attribute and service attribute prioritization. An algorithm of Kano-QFD matrix operation is developed to compose the prioritized complaint and compliment indexes. Finally, the results of prioritized service attributes are mapped to service delivery category to determine the most prioritized service delivery that need to be improved at the first place by healthcare service provider.

Growth and fillet quality attributes of five genetic strains of rainbow trout (Oncorhynchus mykiss) reared in a partial water reuse system and harvested at different sizes

USDA-ARS?s Scientific Manuscript database

Genetics and environment can interact to influence fish growth performance and product quality attributes. Interaction in recirculating aquaculture systems (RAS) makes selection of fish strain and harvest sizes critical for optimizing fish quality. Definition of growth performance and quality outcom...

INCITS W1.1 development update: appearance-based image quality standards for printers

NASA Astrophysics Data System (ADS)

Zeise, Eric K.; Rasmussen, D. René; Ng, Yee S.; Dalal, Edul; McCarthy, Ann; Williams, Don

2008-01-01

In September 2000, INCITS W1 (the U.S. representative of ISO/IEC JTC1/SC28, the standardization committee for office equipment) was chartered to develop an appearance-based image quality standard. (1),(2) The resulting W1.1 project is based on a proposal (3) that perceived image quality can be described by a small set of broad-based attributes. There are currently six ad hoc teams, each working towards the development of standards for evaluation of perceptual image quality of color printers for one or more of these image quality attributes. This paper summarizes the work in progress of the teams addressing the attributes of Macro-Uniformity, Colour Rendition, Gloss & Gloss Uniformity, Text & Line Quality and Effective Resolution.

ATTRIBUTES OF AESTHETIC QUALITY USED BY TEXTILE CONSERVATORS IN EVALUATING CONSERVATION INTERVENTIONS ON MUSEUM COSTUMES.

PubMed

Nilsson, Johanna; Axelsson, Östen

2015-08-01

Aesthetic quality is central to textile conservators when evaluating a conservation method. However, the literature on textile conservation chiefly focuses on physical properties, and little is known about what factors determine aesthetic quality according to textile conservators. The latter was explored through two experiments. Experiment 1 explored the underlying attributes of aesthetic quality of textile conservation interventions. Experiment 2 explored the relationships between these attributes and how well they predicted aesthetic quality. Rank-order correlation analyses revealed two latent factors called Coherence and Completeness. Ordinal regression analysis revealed that Coherence was the most important predictor of aesthetic quality. This means that a successful conservation intervention is visually well-integrated with the textile item in terms of the material and method.

Evaluating changes in water quality with respect to nonpoint source nutrient management strategies in the Chesapeake Bay Watershed

NASA Astrophysics Data System (ADS)

Keisman, J.; Sekellick, A.; Blomquist, J.; Devereux, O. H.; Hively, W. D.; Johnston, M.; Moyer, D.; Sweeney, J.

2014-12-01

Chesapeake Bay is a eutrophic ecosystem with periodic hypoxia and anoxia, algal blooms, diminished submerged aquatic vegetation, and degraded stocks of marine life. Knowledge of the effectiveness of actions taken across the watershed to reduce nitrogen (N) and phosphorus (P) loads to the bay (i.e. "best management practices" or BMPs) is essential to its restoration. While nutrient inputs from point sources (e.g. wastewater treatment plants and other industrial and municipal operations) are tracked, inputs from nonpoint sources, including atmospheric deposition, farms, lawns, septic systems, and stormwater, are difficult to measure. Estimating reductions in nonpoint source inputs attributable to BMPs requires compilation and comparison of data on water quality, climate, land use, point source discharges, and BMP implementation. To explore the relation of changes in nonpoint source inputs and BMP implementation to changes in water quality, a subset of small watersheds (those containing at least 10 years of water quality monitoring data) within the Chesapeake Watershed were selected for study. For these watersheds, data were compiled on geomorphology, demographics, land use, point source discharges, atmospheric deposition, and agricultural practices such as livestock populations, crop acres, and manure and fertilizer application. In addition, data on BMP implementation for 1985-2012 were provided by the Environmental Protection Agency Chesapeake Bay Program Office (CBPO) and the U.S. Department of Agriculture. A spatially referenced nonlinear regression model (SPARROW) provided estimates attributing N and P loads associated with receiving waters to different nutrient sources. A recently developed multiple regression technique ("Weighted Regressions on Time, Discharge and Season" or WRTDS) provided an enhanced understanding of long-term trends in N and P loads and concentrations. A suite of deterministic models developed by the CBPO was used to estimate expected nutrient load reductions attributable to BMPs. Further quantification of the relation of land-based nutrient sources and BMPs to water quality in the bay and its tributaries must account for inconsistency in BMP data over time and uncertainty regarding BMP locations and effectiveness.

Gender differences in multiple underlying dimensions of health-related quality of life are associated with sociodemographic and socioeconomic status.

PubMed

Cherepanov, Dasha; Palta, Mari; Fryback, Dennis G; Robert, Stephanie A; Hays, Ron D; Kaplan, Robert M

2011-11-01

The purpose of the study was to examine whether gender differences in summary health-related quality of life (HRQoL) are due to differences in specific dimensions of health, and whether they are explained by sociodemographic and socioeconomic (SES) variation. The National Health Measurement Study collected cross-sectional data on a national sample of 3648 black and white noninstitutionalized adults ages 35 to 89 years. Data included the Short Form 36-Item survey, which yielded separate Mental and Physical Component Summary scores (MCS and PCS, respectively), and five HRQoL indexes: Short Form 6 dimension, EuroQol 5 dimension, the Health Utilities Indexes Mark 2 and 3, and the Quality of Well-Being Scale Self-Administered form. Structural equation models were used to explore gender differences in physical, psychosocial, and pain latent dimensions of the 5 indexes, adjusting for sociodemographic and SES indicators. Observed MCS and PCS scores were examined in regression models to judge robustness of latent results. Men had better estimated physical and psychosocial health and less pain than women with similar trends on the MCS and PCS scores. Adjustments for marital status or income reduced gender differences more than did other indicators. Adjusting results for partial factorial invariance of HRQoL attributes supported the presence of gender differentials, but also indicated that these differences are impacted by dimensions being related to some HRQoL attributes differently by gender. Men have better estimated health on 3 latent dimensions of HRQoL-physical, psychosocial, and pain-comparable to gender differences on the observed MCS and PCS scores. Gender differences are partly explained by sociodemographic and SES factors, highlighting the role of socioeconomic inequalities in perpetuating gender differences in health outcomes across multiple domains. These results also emphasize the importance of accounting for measurement invariance for meaningful comparison of group differences in estimated means of self-reported measures of health.

Combined effects of sleep quality and depression on quality of life in patients with type 2 diabetes.

PubMed

Zhang, Pan; Lou, Peian; Chang, Guiqiu; Chen, Peipei; Zhang, Lei; Li, Ting; Qiao, Cheng

2016-04-05

Poor sleep quality and depression negatively impact the health-related quality of life of patients with type 2 diabetes, but the combined effect of the two factors is unknown. This study aimed to assess the interactive effects of poor sleep quality and depression on the quality of life in patients with type 2 diabetes. Patients with type 2 diabetes (n = 944) completed the Diabetes Specificity Quality of Life scale (DSQL) and questionnaires on sleep quality and depression. The products of poor sleep quality and depression were added to the logistic regression model to evaluate their multiplicative interactions, which were expressed as the relative excess risk of interaction (RERI), the attributable proportion (AP) of interaction, and the synergy index (S). Poor sleep quality and depressive symptoms both increased DSQL scores. The co-presence of poor sleep quality and depressive symptoms significantly reduced DSQL scores by a factor of 3.96 on biological interaction measures. The relative excess risk of interaction was 1.08. The combined effect of poor sleep quality and depressive symptoms was observed only in women. Patients with both depressive symptoms and poor sleep quality are at an increased risk of reduction in diabetes-related quality of life, and this risk is particularly high for women due to the interaction effect. Clinicians should screen for and treat sleep difficulties and depressive symptoms in patients with type 2 diabetes.

Variation in Estimated Ozone-Related Health Impacts of Climate Change due to Modeling Choices and Assumptions

PubMed Central

Post, Ellen S.; Grambsch, Anne; Weaver, Chris; Morefield, Philip; Leung, Lai-Yung; Nolte, Christopher G.; Adams, Peter; Liang, Xin-Zhong; Zhu, Jin-Hong; Mahoney, Hardee

2012-01-01

Background: Future climate change may cause air quality degradation via climate-induced changes in meteorology, atmospheric chemistry, and emissions into the air. Few studies have explicitly modeled the potential relationships between climate change, air quality, and human health, and fewer still have investigated the sensitivity of estimates to the underlying modeling choices. Objectives: Our goal was to assess the sensitivity of estimated ozone-related human health impacts of climate change to key modeling choices. Methods: Our analysis included seven modeling systems in which a climate change model is linked to an air quality model, five population projections, and multiple concentration–response functions. Using the U.S. Environmental Protection Agency’s (EPA’s) Environmental Benefits Mapping and Analysis Program (BenMAP), we estimated future ozone (O3)-related health effects in the United States attributable to simulated climate change between the years 2000 and approximately 2050, given each combination of modeling choices. Health effects and concentration–response functions were chosen to match those used in the U.S. EPA’s 2008 Regulatory Impact Analysis of the National Ambient Air Quality Standards for O3. Results: Different combinations of methodological choices produced a range of estimates of national O3-related mortality from roughly 600 deaths avoided as a result of climate change to 2,500 deaths attributable to climate change (although the large majority produced increases in mortality). The choice of the climate change and the air quality model reflected the greatest source of uncertainty, with the other modeling choices having lesser but still substantial effects. Conclusions: Our results highlight the need to use an ensemble approach, instead of relying on any one set of modeling choices, to assess the potential risks associated with O3-related human health effects resulting from climate change. PMID:22796531

Hidden Item Variance in Multiple Mini-Interview Scores

ERIC Educational Resources Information Center

Zaidi, Nikki L.; Swoboda, Christopher M.; Kelcey, Benjamin M.; Manuel, R. Stephen

2017-01-01

The extant literature has largely ignored a potentially significant source of variance in multiple mini-interview (MMI) scores by "hiding" the variance attributable to the sample of attributes used on an evaluation form. This potential source of hidden variance can be defined as rating items, which typically comprise an MMI evaluation…

Structural equation model of total phosphorus loads in the Red River of the North Basin, USA and Canada

USGS Publications Warehouse

Ryberg, Karen R.

2017-01-01

Attribution of the causes of trends in nutrient loading is often limited to correlation, qualitative reasoning, or references to the work of others. This paper represents efforts to improve causal attribution of water-quality changes. The Red River of the North basin provides a regional test case because of international interest in the reduction of total phosphorus loads and the availability of long-term total phosphorus data and ancillary geospatial data with the potential to explain changes in water quality over time. The objectives of the study are to investigate structural equation modeling methods for application to water-quality problems and to test causal hypotheses related to the drivers of total phosphorus loads over the period 1970 to 2012. Multiple working hypotheses that explain total phosphorus loads and methods for estimating missing ancillary data were developed, and water-quality related challenges to structural equation modeling (including skewed data and scaling issues) were addressed. The model indicates that increased precipitation in season 1 (November–February) or season 2 (March–June) would increase total phosphorus loads in the basin. The effect of agricultural practices on total phosphorus loads was significant, although the effect is about one-third of the effect of season 1 precipitation. The structural equation model representing loads at six sites in the basin shows that climate and agricultural practices explain almost 60% of the annual total phosphorus load in the Red River of the North basin. The modeling process and the unexplained variance highlight the need for better ancillary long-term data for causal assessments.

Measuring Environmental Quality in the Southern Appalachian Mountains

Treesearch

Linwood Pendleton; Brent Sohngen; Robert Mendelsohn; Thomas Holmes

1998-01-01

This study presents a method for valuing recreational environmental quality in the forests of the southeastern United States. The paper offers a method for choosing, measuring, and valuing forest attributes. Surveys and popular recreation literature are used to identify forest attributes that contribute to recreational quality. Standard ecological techniques are...

Dyadic Processes in Early Marriage: Attributions, Behavior, and Marital Quality

ERIC Educational Resources Information Center

Durtschi, Jared A.; Fincham, Frank D.; Cui, Ming; Lorenz, Frederick O.; Conger, Rand D.

2011-01-01

Marital processes in early marriage are important for understanding couples' future marital quality. Spouses' attributions about a partner's behavior have been linked to marital quality, yet the mechanisms underlying this association remain largely unknown. When we used couple data from the Family Transitions Project (N = 280 couples) across the…

Quality of Disease Management and Risk of Mortality in English Primary Care Practices.

PubMed

Dusheiko, Mark; Gravelle, Hugh; Martin, Stephen; Smith, Peter C

2015-10-01

To investigate whether better management of chronic conditions by family practices reduces mortality risk. Two random samples of 5 million patients registered with over 8,000 English family practices followed up for 4 years (2004/5-2007/8). Measures of the quality of disease management for 10 conditions were constructed for each family practice for each year. The outcome measure was an indicator taking the value 1 if the patient died during a specified year, 0 otherwise. Cross-section and multilevel panel data multiple logistic regressions were estimated. Covariates included age, gender, morbidity, hospitalizations, attributed socio-economic characteristics, and local health care supply measures. Although a composite measure of the quality of disease management for all 10 conditions was significantly associated with lower mortality, only the quality of stroke care was significant when all 10 quality measures were entered in the regression. The panel data results suggest that a 1 percent improvement in the quality of stroke care could reduce the annual number of deaths in England by 782 [95 percent CI: 423, 1140]. A longer study period may be necessary to detect any mortality impact of better management of other conditions. © Health Research and Educational Trust.

Biometric parameters of the bream (Abramis brama) as indicators for long-term changes in fish health and environmental quality--data from the German ESB.

PubMed

Teubner, Diana; Paulus, Martin; Veith, Michael; Klein, Roland

2015-02-01

Piscifaunal health depends upon the state and quality of the aquatic environment. Variations in physical condition of fish may therefore be attributed to changes in environmental quality. Based on time series of up to 20 years of biometric data of bream from multiple sampling sites of the German environmental specimen bank (ESB), this study assessed whether changes in biometric parameters are able to indicate long-term alterations in fish health and environmental quality. Evaluated biometric parameters of fish health comprised length and weight of individuals of a defined age class, the condition factor, lipid content and hepatosomatic index (HSI). Although there are negative trends of the HSI, the overall development of health parameters can be interpreted as positive. This seems to suggest that health parameters conclusively mirror the long-term improvement of water quality in the selected rivers. However, the applicability of the condition factor as well as lipid content as indicators for fish health remained subject to restrictions. Altogether, the results from the ESB confirmed the high value of biometric parameters for monitoring of long-term changes in state and quality of aquatic ecosystems.

A Conceptual Framework for Quality of Care

PubMed Central

Mosadeghrad, Ali Mohammad

2012-01-01

Despite extensive research on defining and measuring health care quality, little attention has been given to different stakeholders’ perspectives of high-quality health care services. The main purpose of this study was to explore the attributes of quality healthcare in the Iranian context. Exploratory in-depth individual and focus group interviews were conducted with key healthcare stakeholders including clients, providers, managers, policy makers, payers, suppliers and accreditation panel members to identify the healthcare service quality attributes and dimensions. Data analysis was carried out by content analysis, with the constant comparative method. Over 100 attributes of quality healthcare service were elicited and grouped into five categories. The dimensions were: efficacy, effectiveness, efficiency, empathy, and environment. Consequently, a comprehensive model of service quality was developed for health care context. The findings of the current study led to a conceptual framework of healthcare quality. This model leads to a better understanding of the different aspects of quality in health care and provides a better basis for defining, measuring and controlling quality of health care services. PMID:23922534

Correlating wine quality indicators to chemical and sensory measurements.

PubMed

Hopfer, Helene; Nelson, Jenny; Ebeler, Susan E; Heymann, Hildegarde

2015-05-12

Twenty-seven commercial Californian Cabernet Sauvignon wines of different quality categories were analyzed with sensory and chemical methods. Correlations between five quality proxies-points awarded during a wine competition, wine expert scores, retail price, vintage, and wine region-were correlated to sensory attributes, volatile compounds, and elemental composition. Wine quality is a multi-faceted construct, incorporating many different layers. Depending on the quality proxy studied, significant correlations between quality and attributes, volatiles and elements were found, some of them previously reported in the literature.

Conjoint Analysis: A Study of the Effects of Using Person Variables.

ERIC Educational Resources Information Center

Fraas, John W.; Newman, Isadore

Three statistical techniques--conjoint analysis, a multiple linear regression model, and a multiple linear regression model with a surrogate person variable--were used to estimate the relative importance of five university attributes for students in the process of selecting a college. The five attributes include: availability and variety of…

Visually Exploring Transportation Schedules.

PubMed

Palomo, Cesar; Guo, Zhan; Silva, Cláudio T; Freire, Juliana

2016-01-01

Public transportation schedules are designed by agencies to optimize service quality under multiple constraints. However, real service usually deviates from the plan. Therefore, transportation analysts need to identify, compare and explain both eventual and systemic performance issues that must be addressed so that better timetables can be created. The purely statistical tools commonly used by analysts pose many difficulties due to the large number of attributes at trip- and station-level for planned and real service. Also challenging is the need for models at multiple scales to search for patterns at different times and stations, since analysts do not know exactly where or when relevant patterns might emerge and need to compute statistical summaries for multiple attributes at different granularities. To aid in this analysis, we worked in close collaboration with a transportation expert to design TR-EX, a visual exploration tool developed to identify, inspect and compare spatio-temporal patterns for planned and real transportation service. TR-EX combines two new visual encodings inspired by Marey's Train Schedule: Trips Explorer for trip-level analysis of frequency, deviation and speed; and Stops Explorer for station-level study of delay, wait time, reliability and performance deficiencies such as bunching. To tackle overplotting and to provide a robust representation for a large numbers of trips and stops at multiple scales, the system supports variable kernel bandwidths to achieve the level of detail required by users for different tasks. We justify our design decisions based on specific analysis needs of transportation analysts. We provide anecdotal evidence of the efficacy of TR-EX through a series of case studies that explore NYC subway service, which illustrate how TR-EX can be used to confirm hypotheses and derive new insights through visual exploration.

How do Housing Subsidies Improve Quality of Life Among Homeless Adults? A Mediation Analysis.

PubMed

O'Connell, Maria; Sint, Kyaw; Rosenheck, Robert

2018-03-01

Supported housing, combining rent subsidies with intensive case management, is associated with improvements in quality of life of homeless adults, but factors mediating their impact on quality of life have not been studied. Twelve-month outcome data from a randomized trial of the Housing and Urban Development- Veterans Affairs Supported Housing program (HUD-VASH) showed that access to a housing rent subsidy plus intensive case management (ICM) was associated with greater improvement in subjective quality of life than ICM alone. Multiple mediation analyses were applied to identify variables that significantly mediated the relationship between receipt of housing voucher and improvements in quality of life. Significant mediating covariates were those whose 95% bias-corrected confidence intervals, when added to the model predicting improvement in quality of life, did not overlap zero. Increases in the number of days housed, size of social network, and availability of emotional support appear to mediate improvement in quality of life and account for 71% of the benefit attributable to having a rent subsidy. Improvement in subjective quality of life though housing subsidies is mediated by gains in both material and psychosocial factors. Mediating factors deserve special attention in supported housing services. © Society for Community Research and Action 2018.

Research on manufacturing service behavior modeling based on block chain theory

NASA Astrophysics Data System (ADS)

Zhao, Gang; Zhang, Guangli; Liu, Ming; Yu, Shuqin; Liu, Yali; Zhang, Xu

2018-04-01

According to the attribute characteristics of processing craft, the manufacturing service behavior is divided into service attribute, basic attribute, process attribute, resource attribute. The attribute information model of manufacturing service is established. The manufacturing service behavior information is successfully divided into public and private domain. Additionally, the block chain technology is introduced, and the information model of manufacturing service based on block chain principle is established, which solves the problem of sharing and secreting information of processing behavior, and ensures that data is not tampered with. Based on the key pairing verification relationship, the selective publishing mechanism for manufacturing information is established, achieving the traceability of product data, guarantying the quality of processing quality.

A Generic Authentication LoA Derivation Model

NASA Astrophysics Data System (ADS)

Yao, Li; Zhang, Ning

One way of achieving a more fine-grained access control is to link an authentication level of assurance (LoA) derived from a requester’s authentication instance to the authorisation decision made to the requester. To realise this vision, there is a need for designing a LoA derivation model that supports the use and quantification of multiple LoA-effecting attributes, and analyse their composite effect on a given authentication instance. This paper reports the design of such a model, namely a generic LoA derivation model (GEA- LoADM). GEA-LoADM takes into account of multiple authentication attributes along with their relationships, abstracts the composite effect by the multiple attributes into a generic value, authentication LoA, and provides algorithms for the run-time derivation of LoA. The algorithms are tailored to reflect the relationships among the attributes involved in an authentication instance. The model has a number of valuable properties, including flexibility and extensibility; it can be applied to different application contexts and support easy addition of new attributes and removal of obsolete ones.

Describing Quality and Sensory Attributes of 3 Mango (Mangifera indica L.) Cultivars at 3 Ripeness Stages Based on Firmness.

PubMed

Nassur, Rita de Cássia Mirela Resende; González-Moscoso, Sara; Crisosto, Gayle M; Lima, Luiz Carlos de Oliveira; Vilas Boas, Eduardo Valério de Barros; Crisosto, Carlos H

2015-09-01

To determine the ideal ripening stage for consumption of the mango cultivars, "Ataulfo," "Haden," and "Tommy Atkins"; fruits at 3 flesh firmness levels (ripeness stages) were evaluated by a trained panel using descriptive analysis after instrumental measurements were made. After harvest, all fruits were ripened to allow softening and quality and sensory attribute changes. Ripening changes during softening of Ataulfo mangos were expressed by a characteristic increase in the perception of "tropical fruit" and "peach" aromas, an increase in "juiciness," "sweetness," and "tropical fruit" flavor, while "fibrousness," "chewiness," and "sourness" decreased. Similar desirable sensory changes were also detected during softening of Haden mangos; an increase in tropical fruit and peach aromas, sweetness and tropical fruit flavor, and a decrease in chewiness, sourness, and bitterness. Softening of Tommy Atkins mangos was followed by reduced chewiness and sourness and increased peach aroma. Softening of all cultivars was followed by decreased sourness and titratable acidity (TA) and increased soluble solids concentration (SSC) and SSC:TA ratio. The results indicate that mango ripening leads to increased expression of sensory attributes such as tropical fruit and peach aromas, tropical flavor, and sweetness that have been related to improved eating quality and these final changes in sensory quality attributes are specific for each cultivar. For example, Ataulfo and Haden mangos had greater improvement in quality and sensory attributes related to fruit eating quality during ripening-softening than Tommy Atkins. In our consumer test, these quality-sensory attributes expressed during ripening that were perceived by the trained panel were also validated, supporting the need for a controlled ripening protocol in mangos. © 2015 Institute of Food Technologists®

Fall attributions among middle-aged and older adults with multiple sclerosis.

PubMed

Peterson, Elizabeth W; Ben Ari, Eynat; Asano, Miho; Finlayson, Marcia L

2013-05-01

To (1) explore the falls attributions of middle-aged and older adults with multiple sclerosis (MS); and (2) examine the personal, health, and MS-related factors associated with the 3 most common attributions. A cross-sectional, descriptive study using data collected through a telephone interview. Falls attributions were obtained through an open-ended question to elicit participants' stories about their most recent fall. Recruitment was done through a national volunteer MS registry. Community. People (N=354) who were ≥55 years of age were interviewed; 313 provided a falls story. Respondents were primarily married, community-dwelling women who had been living with MS for 21 years, on average. Not applicable. The 3 most common fall attributions were used as dependent variables to address the second research objective. A total of 14 falls attributions were identified. The most common were balance (41.5%), lower extremity malfunction (31%), and assistive technology (AT; 29.7%). Falls control was significantly associated with the balance attribution (odds ratio [OR]=.51; 95% confidence interval [CI], .29-.88), no variables were associated with lower extremity malfunction attribution, and use of multiple mobility devices was significantly associated with the AT attribution (OR=3.78; 95% CI, 2.09-6.85). Findings highlight the complex nature of falls among middle-aged and older adults with MS and point to the need for comprehensive fall prevention interventions for this population. Further investigation of the role that perceived control over falls plays in this population is warranted. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Dynamic Temporal Relations between Anxious and Depressive Symptoms across Adolescence

PubMed Central

Kouros, Chrystyna D.; Quasem, Susanna; Garber, Judy

2015-01-01

Symptoms of anxiety and depression are prevalent among adolescents and associated with impairment in multiple domains of functioning. Moreover, anxiety and depression frequently co-occur, with estimated comorbidity rates as high as 75%. Whereas previous research has shown that anxiety symptoms predict increased depressive symptoms over time, the relation between depressive symptoms and later anxiety symptoms has been inconsistent. The present study examined dynamic relations between anxiety and depressive symptoms across adolescence, and explored whether these longitudinal relations were moderated by maternal history of anxiety, family relationship quality, or children’s attributional style. Participants included 240 children (M age = 11.86 years; 53.9% female) and their mothers who were assessed annually for six years. Children reported on their depressive symptoms and mothers reported on their child’s anxiety symptoms. Dynamic latent change score models indicated that anxiety symptoms predicted subsequent elevations in depressive symptoms over time. Depressive symptoms predicted subsequent elevations in anxiety symptoms among children who had mothers with a history of anxiety, reported low family relationship quality, or had high levels of negative attributions. Thus, whereas anxiety symptoms were a robust predictor of later depressive symptoms during adolescence, contextual and individual factors may be important to consider when examining relations between depressive symptoms and subsequent change in anxiety symptoms. PMID:23880385

Gluten-Free Sources of Fermentable Extract: Effect of Temperature and Germination Time on Quality Attributes of Teff [Eragrostis tef (zucc.) Trotter] Malt and Wort.

PubMed

Di Ghionno, Lidia; Marconi, Ombretta; Lee, Eung Gwan; Rice, Christopher J; Sileoni, Valeria; Perretti, Giuseppe

2017-06-14

This study was conducted to evaluate the behavior of a white teff variety called Witkop during malting by using different parameters (germination temperature and duration) and to identify the best malting program. Samples were evaluated for standard quality malt and wort attributes, pasting characteristics, β-glucan and arabinoxylan content, and sugar profile. It was concluded that malting teff at 24 °C for 6 days produced acceptable malt in terms of quality attributes and sugar profile for brewing. The main attributes were 80.4% extract, 80.9% fermentability, 1.53 mPa s viscosity, 7.4 EBC-U color, 129 mg/L FAN, and 72.1 g/L of total fermentable sugars. Statistical analysis showed that pasting characteristics of teff malt were negatively correlated with some malt quality attributes, such as extract and fermentability. Witkop teff appeared to be a promising raw material for malting and brewing. However, the small grain size may lead to difficulties in handling malting process, and a bespoke brewhouse plant should be developed for the production at industrial scale.

Evaluation of the chemical quality traits of soybean seeds, as related to sensory attributes of soymilk.

PubMed

Ma, Lei; Li, Bin; Han, Fenxia; Yan, Shurong; Wang, Lianzheng; Sun, Junming

2015-04-15

The soybean seed chemical quality traits (including protein content, oil content, fatty acid composition, isoflavone content, and protein subunits), soymilk chemical character (soluble solid), and soymilk sensory attributes were evaluated among 70 genotypes to determine the correlation between seed chemical quality traits and soymilk sensory attributes. Six sensory parameters (i.e., soymilk aroma, smoothness in the mouth, thickness in the mouth, sweetness, colour and appearance, and overall acceptability) and a seven-point hedonic scale for each parameter were developed. Significant positive correlations were observed between overall acceptability and the other five evaluation parameters, suggesting that overall acceptability is an ideal parameter for evaluating soymilk flavour. The soymilk sensory attributes were significantly positively correlated with the characteristics of the glycinin (11S)/beta-conglycinin (7S) protein ratio, soluble solid, and oil content but negatively correlated with glycitein and protein content. Our results indicated that soymilk sensory attributes could be improved by selecting the desirable seed chemical quality traits in practical soybean breeding programs. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Estimating the lifetime risk of cancer associated with multiple CT scans.

PubMed

Ivanov, V K; Kashcheev, V V; Chekin, S Yu; Menyaylo, A N; Pryakhin, E A; Tsyb, A F; Mettler, F A

2014-12-01

Multiple CT scans are often done on the same patient resulting in an increased risk of cancer. Prior publications have estimated risks on a population basis and often using an effective dose. Simply adding up the risks from single scans does not correctly account for the survival function. A methodology for estimating personal radiation risks attributed to multiple CT imaging using organ doses is presented in this article. The estimated magnitude of the attributable risk fraction for the possible development of radiation-induced cancer indicates the necessity for strong clinical justification when ordering multiple CT scans.

Quality-by-design III: application of near-infrared spectroscopy to monitor roller compaction in-process and product quality attributes of immediate release tablets.

PubMed

Kona, Ravikanth; Fahmy, Raafat M; Claycamp, Gregg; Polli, James E; Martinez, Marilyn; Hoag, Stephen W

2015-02-01

The objective of this study is to use near-infrared spectroscopy (NIRS) coupled with multivariate chemometric models to monitor granule and tablet quality attributes in the formulation development and manufacturing of ciprofloxacin hydrochloride (CIP) immediate release tablets. Critical roller compaction process parameters, compression force (CFt), and formulation variables identified from our earlier studies were evaluated in more detail. Multivariate principal component analysis (PCA) and partial least square (PLS) models were developed during the development stage and used as a control tool to predict the quality of granules and tablets. Validated models were used to monitor and control batches manufactured at different sites to assess their robustness to change. The results showed that roll pressure (RP) and CFt played a critical role in the quality of the granules and the finished product within the range tested. Replacing binder source did not statistically influence the quality attributes of the granules and tablets. However, lubricant type has significantly impacted the granule size. Blend uniformity, crushing force, disintegration time during the manufacturing was predicted using validated PLS regression models with acceptable standard error of prediction (SEP) values, whereas the models resulted in higher SEP for batches obtained from different manufacturing site. From this study, we were able to identify critical factors which could impact the quality attributes of the CIP IR tablets. In summary, we demonstrated the ability of near-infrared spectroscopy coupled with chemometrics as a powerful tool to monitor critical quality attributes (CQA) identified during formulation development.

Determination of Appropriate Service Delivery Level for Quantitative Attributes of Household Toilets in Rural Settlements of India from Users' Perspective

NASA Astrophysics Data System (ADS)

Rashid, Mohammad; Pandit, Debapratim

2018-04-01

Improvement of quality of sanitation services in rural settlements is an important development goal in developing countries including India and accordingly several strategies are adopted which promote the demand and use of household toilets through creating awareness and providing subsidies to poor people for construction of household toilets with service-level standards specified from experts' perspective. In many cases, users are unsatisfied with the quality of toilets constructed using subsidies and the same remain unused. Users' satisfaction depends on their perceptions of service quality of individual attributes and overall service quality of the household toilets, which is an important determinant of sustainability and sustained use of toilets. This study aims to assess and benchmark the appropriate service delivery level for quantitative attributes of rural household toilets based on user perception. The service quality is determined with the help of level of service (LOS) scales developed using successive interval scaling technique, the zone of tolerance (ZOT), and users satisfaction level (USL) which relates service delivery levels with user satisfaction directly. The study finds that the service quality of most of the attributes of household toilets constructed using subsidies is perceived as poor. The results also suggest that most of the users expect to have a toilet with the service level of attributes ranging between LOS A and LOS B.

Determination of Appropriate Service Delivery Level for Quantitative Attributes of Household Toilets in Rural Settlements of India from Users' Perspective.

PubMed

Rashid, Mohammad; Pandit, Debapratim

2018-04-01

Improvement of quality of sanitation services in rural settlements is an important development goal in developing countries including India and accordingly several strategies are adopted which promote the demand and use of household toilets through creating awareness and providing subsidies to poor people for construction of household toilets with service-level standards specified from experts' perspective. In many cases, users are unsatisfied with the quality of toilets constructed using subsidies and the same remain unused. Users' satisfaction depends on their perceptions of service quality of individual attributes and overall service quality of the household toilets, which is an important determinant of sustainability and sustained use of toilets. This study aims to assess and benchmark the appropriate service delivery level for quantitative attributes of rural household toilets based on user perception. The service quality is determined with the help of level of service (LOS) scales developed using successive interval scaling technique, the zone of tolerance (ZOT), and users satisfaction level (USL) which relates service delivery levels with user satisfaction directly. The study finds that the service quality of most of the attributes of household toilets constructed using subsidies is perceived as poor. The results also suggest that most of the users expect to have a toilet with the service level of attributes ranging between LOS A and LOS B.

Quality of life and ethics.

PubMed

Fumincelli, Laís; Mazzo, Alessandra; Martins, José Carlos Amado; Mendes, Isabel Amélia Costa

2017-01-01

In health, ethics is an essential aspect of practice and care and guarantees a better quality of life for patients and their caregivers. To outline a conceptual analysis of quality of life and ethics, identifying attributes, contexts and magnitudes for health. A qualitative design about quality of life and ethics in health, considering the evolutionary approach in order to analyse the concept. To collect the data, a search was done using the keywords ethic*, quality of life and health. After, in total, 152 studies were found, finalizing seven relevant studies for the proposed concept analysis. Of seven studies analysed, their main results were shown by means of antecedents, consequences and attributes of the concepts. The three final attributes that synthesize the concept of quality of life and ethics in health were highlighted: Ethics dilemmas and quality of life; Human ethics and quality of life; and Ethics of care and quality of life. In fact, the attributes and context clearly reveal that ethics and quality of life influence the ability to solve ethical dilemmas, guarantee human ethics in healthcare and impact ethics in healthcare for the production of effective health policies and care that encompasses professional quality of life as well. The magnitude of ethical knowledge in each professional discipline permits cultivating a solidary attitude and developing the willingness to improve healthcare. The right to access, dignity and respect in care delivery are rooted in behaviours and are spontaneously applied in practice to the extent that they play an ethical role.

Management of multiple myeloma in resource-constrained settings.

PubMed

Kumar, Lalit; Kumar Sahoo, Ranjit

2016-12-01

The prognosis of patients with multiple myeloma (MM) has improved significantly in the past two decades. This is attributed to use of novel agents for induction, high-dose chemotherapy and autologous stem cell transplantation (ASCT), maintenance therapy, and improved supportive care. Currently, evidence-based management guidelines/recommendations developed by International societies/groups are being followed partially in low-resource settings. Lack of quality diagnostics (eg, cytogenetics/fluorescence in situ hybridization (FISH), serum free light chains), novel therapeutics, and trained manpower, and limited financial resources are key challanges. An optimal utilization of available resources with continued educational activities of treating physicians focused on improving knowledge in the management of such patients may be a way forward to improve the outcome of myeloma patients in these countries. Our current approach to the management of this disease is presented here through a discussion of clinical vignettes. Copyright © 2016 Elsevier Inc. All rights reserved.

The effect of source credibility on consumers' perceptions of the quality of health information on the Internet.

PubMed

Bates, Benjamin R; Romina, Sharon; Ahmed, Rukhsana; Hopson, Danielle

2006-03-01

Recent use of the Internet as a source of health information has raised concerns about consumers' ability to tell 'good' information from 'bad' information. Although consumers report that they use source credibility to judge information quality, several observational studies suggest that consumers make little use of source credibility. This study examines consumer evaluations of web pages attributed to a credible source as compared to generic web pages on measures of message quality. In spring 2005, a community-wide convenience survey was distributed in a regional hub city in Ohio, USA. 519 participants were randomly assigned one of six messages discussing lung cancer prevention: three messages each attributed to a highly credible national organization and three identical messages each attributed to a generic web page. Independent sample t-tests were conducted to compare each attributed message to its counterpart attributed to a generic web page on measures of trustworthiness, truthfulness, readability, and completeness. The results demonstrated that differences in attribution to a source did not have a significant effect on consumers' evaluations of the quality of the information.Conclusions. The authors offer suggestions for national organizations to promote credibility to consumers as a heuristic for choosing better online health information through the use of media co-channels to emphasize credibility.

Productive engagement in older adults: a concept analysis.

PubMed

Thanakwang, Kattika; Isaramalai, Sang-Arun

2013-03-01

This study aimed to clarify the concept of productive engagement as it applies to older adults. The concept analysis was based on Walker and Avant's eight-step method. A literature review of articles published in English between 1990 and 2011 (n = 37) was conducted, using an electronic search of multiple sources. Results revealed that four defining attributes for productive engagement include continuing to work either paid or unpaid, caring for others, engaging in social activities, and growing spirituality. The antecedents of productive engagement are sociocultural factors as well as individual and institutional capacities. Meanwhile, the consequences are increased feelings of usefulness, improved health and well-being, aged successfully, and enhanced quality of life. Model, borderline, and contrary cases are presented to illustrate the concept's defining attributes. Defining the concept of productive engagement provides a basis for nurses and other health professionals to better understand productive engagement in older adults, thus effective strategic plans or programs for promoting productive roles among older adults can be further developed. © 2013 Wiley Publishing Asia Pty Ltd.

Do the right thing: the assumption of optimality in lay decision theory and causal judgment.

PubMed

Johnson, Samuel G B; Rips, Lance J

2015-03-01

Human decision-making is often characterized as irrational and suboptimal. Here we ask whether people nonetheless assume optimal choices from other decision-makers: Are people intuitive classical economists? In seven experiments, we show that an agent's perceived optimality in choice affects attributions of responsibility and causation for the outcomes of their actions. We use this paradigm to examine several issues in lay decision theory, including how responsibility judgments depend on the efficacy of the agent's actual and counterfactual choices (Experiments 1-3), individual differences in responsibility assignment strategies (Experiment 4), and how people conceptualize decisions involving trade-offs among multiple goals (Experiments 5-6). We also find similar results using everyday decision problems (Experiment 7). Taken together, these experiments show that attributions of responsibility depend not only on what decision-makers do, but also on the quality of the options they choose not to take. Copyright © 2015 Elsevier Inc. All rights reserved.

Client expectations and satisfaction of quality in home care services. A consumer perspective.

PubMed

Samuelsson, G; Wister, A

2000-12-01

This study examines clients' expectations of quality in home care services and their perceived satisfaction with services among a random sample of 76 home care recipients in Vancouver, Canada. The researchers conducted face-to-face interviews that applied Multiattribute Utility Technology, a procedure that organizes several quality attributes of "ideal" home care into a tree structure to compare their relative importance and ranking from the clients' perspective. Participants also were asked to state their satisfaction or dissatisfaction with the services received in these domains. Among the five main quality attributes identified, the subjects ranked suitability of the home helper and its subset, personal competence, as the most important indicators of quality, followed by continuity in service. In addition, clients tended to have a high level of satisfaction with regard to the attributes of overall home care services. The highest level of satisfaction was reported for elements of personal dispositions of home care staff. The lowest level of satisfaction involved the time/availability components of the service. Finally, comparisons between client expectations and satisfaction of received home care services showed the highest discrepancy for the attributes of influence and time/availability and the greatest congruence for personal attributes of the staff. The results are discussed in terms of their implications for the delivery of home care services.

Attribute importance segmentation of Norwegian seafood consumers: The inclusion of salient packaging attributes.

PubMed

Olsen, Svein Ottar; Tuu, Ho Huu; Grunert, Klaus G

2017-10-01

The main purpose of this study is to identify consumer segments based on the importance of product attributes when buying seafood for homemade meals on weekdays. There is a particular focus on the relative importance of the packaging attributes of fresh seafood. The results are based on a representative survey of 840 Norwegian consumers between 18 and 80 years of age. This study found that taste, freshness, nutritional value and naturalness are the most important attributes for the home consumption of seafood. Except for the high importance of information about expiration date, most other packaging attributes have only medium importance. Three consumer segments are identified based on the importance of 33 attributes associated with seafood: Perfectionists, Quality Conscious and Careless Consumers. The Quality Conscious consumers feel more self-confident in their evaluation of quality, and are less concerned with packaging, branding, convenience and emotional benefits compared to the Perfectionists. Careless Consumers are important as regular consumers of convenient and pre-packed seafood products and value recipe information on the packaging. The seafood industry may use the results provided in this study to strengthen their positioning of seafood across three different consumer segments. Copyright © 2017 Elsevier Ltd. All rights reserved.

Product design enhancement using apparent usability and affective quality.

PubMed

Seva, Rosemary R; Gosiaco, Katherine Grace T; Santos, Ma Crea Eurice D; Pangilinan, Denise Mae L

2011-03-01

In this study, apparent usability and affective quality were integrated in a design framework called the Usability Perception and Emotion Enhancement Model (UPEEM). The UPEEM was validated using structural equation modeling (SEM). The methodology consists of four phases namely product selection, attribute identification, design alternative generation, and design alternative evaluation. The first stage involved the selection of a product that highly involves the consumer. In the attribute identification stage, design elements of the product were identified. The possible values of these elements were also determined for use in the experimentation process. Design of experiments was used to identify how the attributes will be varied in the design alternative stage and which of the attributes significantly contribute to affective quality, apparent usability, and desirability in the design evaluation stage. Results suggest that product attributes related to form are relevant in eliciting intense affect and perception of usability in mobile phones especially those directly related to functionality and aesthetics. This study considered only four product attributes among so many due to the constraints of the research design employed. Attributes related to aesthetic perception of a product enhance apparent usability such as those related to dimensional ratios. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Mapping by sequencing in cotton (Gossypium hirsutum) line MD52ne identified candidate genes for fiber strength and its related quality attributes

USDA-ARS?s Scientific Manuscript database

Fiber strength, length, maturity and fineness determine the market value of cotton fibers and the quality of spun yarn. Cotton fiber strength has been recognized as a critical quality attribute in the modern textile industry. Fine mapping along with quantitative trait loci (QTL) validation and candi...

26 CFR 1.1248-8 - Earnings and profits attributable to stock following certain non-recognition transactions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... of this section. (5) Reduction in earnings and profits attributable to stock to prevent multiple... reduce the CFC3 earnings and profits attributable to its CFC2 stock by $9. These reductions occur without... 26 Internal Revenue 11 2011-04-01 2011-04-01 false Earnings and profits attributable to stock...

Predicting Social and Communicative Ability in School-Age Children with Autism Spectrum Disorder: A Pilot Study of the Social Attribution Task, Multiple Choice

ERIC Educational Resources Information Center

Burger-Caplan, Rebecca; Saulnier, Celine; Jones, Warren; Klin, Ami

2016-01-01

The Social Attribution Task, Multiple Choice is introduced as a measure of implicit social cognitive ability in children, addressing a key challenge in quantification of social cognitive function in autism spectrum disorder, whereby individuals can often be successful in explicit social scenarios, despite marked social adaptive deficits. The…

QTL analysis of fruit quality in fresh market tomato: a few chromosome regions control the variation of sensory and instrumental traits.

PubMed

Causse, M; Saliba-Colombani, V; Lecomte, L; Duffé, P; Rousselle, P; Buret, M

2002-10-01

The organoleptic quality of tomato fruit involves a set of attributes (flavour, aroma, texture) that can be evaluated either by sensory analyses or by instrumental measures. In order to study the genetic control of this characteristic, a recombinant inbred line (RIL) population was developed from an intraspecific cross between a cherry tomato line with a good overall aroma intensity and an inbred line with medium flavour but bigger fruits. A total of 38 traits involved in organoleptic quality were evaluated. Physical traits included fruit weight, diameter, colour, firmness, and elasticity. Chemical traits were dry matter weight, titratable acidity, pH, and the contents of soluble solids, sugars, lycopene, carotene, and 12 aroma volatiles. A panel of trained assessors quantified sensory attributes: flavour (sweetness and sourness), aroma (overall aroma intensity, together with candy, lemon, citrus fruit, and pharmaceutical aromas) and texture (firmness, meltiness, mealiness, juiciness, and skin difficult to swallow). RILs showed a large range of variation. Molecular markers were used to map a total of 130 quantitative trait loci (QTL) for the 38 traits. They were mainly distributed in a few chromosome regions. Major QTLs (R(2) >30%) were detected for fruit weight, diameter, colour, firmness, meltiness, and for six aroma volatiles. The relationships between instrumental measures and sensory traits were analysed with regard to the QTL map. A special insight was provided about the few regions where QTLs are related to multiple traits. A few examples are shown to illustrate how the simultaneous analysis of QTL segregation for related traits may aid in understanding the genetic control of quality traits and pave the way towards QTL characterization.

Stochastic nature of Landsat MSS data

NASA Technical Reports Server (NTRS)

Labovitz, M. L.; Masuoka, E. J.

1987-01-01

A multiple series generalization of the ARIMA models is used to model Landsat MSS scan lines as sequences of vectors, each vector having four elements (bands). The purpose of this work is to investigate if Landsat scan lines can be described by a general multiple series linear stochastic model and if the coefficients of such a model vary as a function of satellite system and target attributes. To accomplish this objective, an exploratory experimental design was set up incorporating six factors, four representing target attributes - location, cloud cover, row (within location), and column (within location) - and two factors representing system attributes - satellite number and detector bank. Each factor was included in the design at two levels and, with two replicates per treatment, 128 scan lines were analyzed. The results of the analysis suggests that a multiple AR(4) model is an adequate representation across all scan lines. Furthermore, the coefficients of the AR(4) model vary with location, particularly changes in physiography (slope regimes), and with percent cloud cover, but are insensitive to changes in system attributes.

A common perceptual temporal limit of binding synchronous inputs across different sensory attributes and modalities.

PubMed

Fujisaki, Waka; Nishida, Shin'ya

2010-08-07

The human brain processes different aspects of the surrounding environment through multiple sensory modalities, and each modality can be subdivided into multiple attribute-specific channels. When the brain rebinds sensory content information ('what') across different channels, temporal coincidence ('when') along with spatial coincidence ('where') provides a critical clue. It however remains unknown whether neural mechanisms for binding synchronous attributes are specific to each attribute combination, or universal and central. In human psychophysical experiments, we examined how combinations of visual, auditory and tactile attributes affect the temporal frequency limit of synchrony-based binding. The results indicated that the upper limits of cross-attribute binding were lower than those of within-attribute binding, and surprisingly similar for any combination of visual, auditory and tactile attributes (2-3 Hz). They are unlikely to be the limits for judging synchrony, since the temporal limit of a cross-attribute synchrony judgement was higher and varied with the modality combination (4-9 Hz). These findings suggest that cross-attribute temporal binding is mediated by a slow central process that combines separately processed 'what' and 'when' properties of a single event. While the synchrony performance reflects temporal bottlenecks existing in 'when' processing, the binding performance reflects the central temporal limit of integrating 'when' and 'what' properties.

Identification of sensory attributes, instrumental and chemical measurements important for consumer acceptability of grilled lamb Longissimus lumborum.

PubMed

Oltra, O R; Farmer, L J; Gordon, A W; Moss, B W; Birnie, J; Devlin, D J; Tolland, E L C; Tollerton, I J; Beattie, A M; Kennedy, J T; Farrell, D

2015-02-01

In this study, important eating quality attributes that influence consumer liking for grilled lamb loin have been identified using preference mapping techniques. The eating quality attributes identified as driving the consumer liking of lamb loin steaks were “tenderness”, “sweet flavour”, “meaty aftertaste”, “roast lamb flavour” and “roast lamb aftertaste”. In contrast, the texture attribute “rubbery” and the flavour attributes “bitter flavour” and "bitter aftertaste" had a negative influence on consumer perceptions. Associations were observed between eating quality and a number of instrumental and chemical measurements. Warner Bratzler Shear Force showed an association with “rubbery” texture and a negative association with “tenderness” and consumer liking scores. The compounds, glucose, glucose-6-phosphate, inosine, inosine monophosphate and adenosine monophosphate were associated with the attributes, “sweet flavour”,“meaty aftertaste”, “roast lamb flavour”, “roast lamb aftertaste” and with consumer scores for liking of lamb which is probably caused by the role some of these compounds play as precursors of flavour and as taste compounds.

Ranking of Sites for Installation of Hydropower Plant Using MLP Neural Network Trained with GA: A MADM Approach

PubMed Central

Singh, Kh. Manglem; Khelchandra, Thongam; Mehta, R. K.

2017-01-01

Every energy system which we consider is an entity by itself, defined by parameters which are interrelated according to some physical laws. In recent year tremendous importance is given in research on site selection in an imprecise environment. In this context, decision making for the suitable location of power plant installation site is an issue of relevance. Environmental impact assessment is often used as a legislative requirement in site selection for decades. The purpose of this current work is to develop a model for decision makers to rank or classify various power plant projects according to multiple criteria attributes such as air quality, water quality, cost of energy delivery, ecological impact, natural hazard, and project duration. The case study in the paper relates to the application of multilayer perceptron trained by genetic algorithm for ranking various power plant locations in India. PMID:28331490

Ranking of Sites for Installation of Hydropower Plant Using MLP Neural Network Trained with GA: A MADM Approach.

PubMed

Shimray, Benjamin A; Singh, Kh Manglem; Khelchandra, Thongam; Mehta, R K

2017-01-01

Every energy system which we consider is an entity by itself, defined by parameters which are interrelated according to some physical laws. In recent year tremendous importance is given in research on site selection in an imprecise environment. In this context, decision making for the suitable location of power plant installation site is an issue of relevance. Environmental impact assessment is often used as a legislative requirement in site selection for decades. The purpose of this current work is to develop a model for decision makers to rank or classify various power plant projects according to multiple criteria attributes such as air quality, water quality, cost of energy delivery, ecological impact, natural hazard, and project duration. The case study in the paper relates to the application of multilayer perceptron trained by genetic algorithm for ranking various power plant locations in India.

A qualitative evaluation of the crucial attributes of contextual information necessary in EHR design to support patient-centered medical home care.

PubMed

Weir, Charlene R; Staggers, Nancy; Gibson, Bryan; Doing-Harris, Kristina; Barrus, Robyn; Dunlea, Robert

2015-04-16

Effective implementation of a Primary Care Medical Home model of care (PCMH) requires integration of patients' contextual information (physical, mental, social and financial status) into an easily retrievable information source for the healthcare team and clinical decision-making. This project explored clinicians' perceptions about important attributes of contextual information for clinical decision-making, how contextual information is expressed in CPRS clinical documentation as well as how clinicians in a highly computerized environment manage information flow related to these areas. A qualitative design using Cognitive Task Analyses and a modified Critical Incident Technique were used. The study was conducted in a large VA with a fully implemented EHR located in the western United States. Seventeen providers working in a PCMH model of care in Primary Care, Home Based Care and Geriatrics reported on a recent difficult transition requiring contextual information for decision-making. The transcribed interviews were qualitatively analyzed for thematic development related to contextual information using an iterative process and multiple reviewers with ATLAS@ti software. Six overarching themes emerged as attributes of contextual information: Informativeness, goal language, temporality, source attribution, retrieval effort, and information quality. These results indicate that specific attributes are needed to in order for contextual information to fully support clinical decision-making in a Medical Home care delivery environment. Improved EHR designs are needed for ease of contextual information access, displaying linkages across time and settings, and explicit linkages to both clinician and patient goals. Implications relevant to providers' information needs, team functioning and EHR design are discussed.

Broadening our understanding of clinical quality: from attribution error to situated cognition.

PubMed

Artino, A R; Durning, S J; Waechter, D M; Leary, K L; Gilliland, W R

2012-02-01

The tendency to overestimate the influence of personal characteristics on outcomes, and to underestimate the influence of situational factors, is known as the fundamental attribution error. We argue that medical-education researchers and policy makers may be guilty of this error in their quest to understand clinical quality. We suggest that to truly understand clinical quality, they must examine situational factors, which often have a strong influence on the quality of clinical encounters.

Evaluation of the structural, physicochemical, and biological characteristics of SB4, a biosimilar of etanercept

PubMed Central

Cho, Ick Hyun; Lee, Nayoung; Song, Dami; Jung, Seong Young; Bou-Assaf, George; Sosic, Zoran; Zhang, Wei; Lyubarskaya, Yelena

2016-01-01

ABSTRACT A biosimilar is a biological medicinal product that is comparable to a reference medicinal product in terms of quality, safety, and efficacy. SB4 was developed as a biosimilar to Enbrel® (etanercept) and was approved as Benepali®, the first biosimilar of etanercept licensed in the European Union (EU). The quality assessment of SB4 was performed in accordance with the ICH comparability guideline and the biosimilar guidelines of the European Medicines Agency and Food and Drug Administration. Extensive structural, physicochemical, and biological testing was performed with state-of-the-art technologies during a side-by-side comparison of the products. Similarity of critical quality attributes (CQAs) was evaluated on the basis of tolerance intervals established from quality data obtained from more than 60 lots of EU-sourced and US-sourced etanercept. Additional quality assessment was focused on a detailed investigation of immunogenicity-related quality attributes, including hydrophobic variants, high-molecular-weight (HMW) species, N-glycolylneuraminic acid (NGNA), and α-1,3-galactose. This comprehensive characterization study demonstrated that SB4 is highly similar to the reference product, Enbrel®, in structural, physicochemical, and biological quality attributes. In addition, the levels of potential immunogenicity-related quality attributes of SB4 such as hydrophobic variants, HMW aggregates, and α-1,3-galactose were less than those of the reference product. PMID:27246928

Cadmium background concentrations to establish reference quality values for soils of São Paulo State, Brazil.

PubMed

de Oliveira, Vinicius Henrique; de Abreu, Cleide Aparecida; Coelho, Ricardo Marques; Melo, Leônidas Carrijo Azevedo

2014-03-01

Proper assessment of soil cadmium (Cd) concentrations is essential to establish legislative limits. The present study aimed to assess background Cd concentrations in soils from the state of São Paulo, Brazil, and to correlate such concentrations with several soil attributes. The topsoil samples (n = 191) were assessed for total Cd contents and for other metals using the USEPA 3051A method. The background concentration was determined according to the third quartile (75th). Principal component analysis, Spearman correlation, and multiple regressions between Cd contents and other soil attributes (pH, cation exchange capacity (CEC), clay content, sum of bases, organic matter, and total Fe, Al, Zn, and Pb levels) were performed. The mean Cd concentration of all 191 samples was 0.4 mg kg(-1), and the background concentration was 0.5 mg kg(-1). After the samples were grouped by parent material (rock origin) and soil type, the background Cd content varied, i.e., soils from igneous, metamorphic, and sedimentary rocks harbored 1.5, 0.4, and 0.2 mg kg(-1) of Cd, respectively. The background Cd content in Oxisols (0.8 mg kg(-1)) was higher than in Ultisols (0.3 mg kg(-1)). Multiple regression demonstrated that Fe was primarily attributed to the natural Cd contents in the soils (R (2) = 0.79). Instead of a single Cd background concentration value representing all São Paulo soils, we propose that the concentrations should be specific for at least Oxisols and Ultisols, which are the primary soil types.

Multi-Interval Discretization of Continuous-Valued Attributes for Classification Learning

NASA Technical Reports Server (NTRS)

Fayyad, U.; Irani, K.

1993-01-01

Since most real-world applications of classification learning involve continuous-valued attributes, properly addressing the discretization process is an important problem. This paper addresses the use of the entropy minimization heuristic for discretizing the range of a continuous-valued attribute into multiple intervals.

Framework and indicator testing protocol for developing and piloting quality indicators for the UK quality and outcomes framework.

PubMed

Campbell, Stephen M; Kontopantelis, Evangelos; Hannon, Kerin; Burke, Martyn; Barber, Annette; Lester, Helen E

2011-08-10

Quality measures should be subjected to a testing protocol before being used in practice using key attributes such as acceptability, feasibility and reliability, as well as identifying issues derived from actual implementation and unintended consequences. We describe the methodologies and results of an indicator testing protocol (ITP) using data from proposed quality indicators for the United Kingdom Quality and Outcomes Framework (QOF). The indicator testing protocol involved a multi-step and methodological process: 1) The RAND/UCLA Appropriateness Method, to test clarity and necessity, 2) data extraction from patients' medical records, to test technical feasibility and reliability, 3) diaries, to test workload, 4) cost-effectiveness modelling, and 5) semi-structured interviews, to test acceptability, implementation issues and unintended consequences. Testing was conducted in a sample of representative family practices in England. These methods were combined into an overall recommendation for each tested indicator. Using an indicator testing protocol as part of piloting was seen as a valuable way of testing potential indicators in 'real world' settings. Pilot 1 (October 2009-March 2010) involved thirteen indicators across six clinical domains and twelve indicators passed the indicator testing protocol. However, the indicator testing protocol identified a number of implementation issues and unintended consequences that can be rectified or removed prior to national roll out. A palliative care indicator is used as an exemplar of the value of piloting using a multiple attribute indicator testing protocol - while technically feasible and reliable, it was unacceptable to practice staff and raised concerns about potentially causing actual patient harm. This indicator testing protocol is one example of a protocol that may be useful in assessing potential quality indicators when adapted to specific country health care settings and may be of use to policy-makers and researchers worldwide to test the likely effect of implementing indicators prior to roll out. It builds on and codifies existing literature and other testing protocols to create a field testing methodology that can be used to produce country specific quality indicators for pay-for-performance or quality improvement schemes.

Transcriptomic analysis of apple fruit ripening and texture attributes

USDA-ARS?s Scientific Manuscript database

Molecular events regulating cultivar-specific apple fruit ripening and sensory quality are largely unknown. Such knowledge is essential for genomic-assisted apple breeding and postharvest quality management. The ripening behavior and texture attributes of two apple cultivars, ‘Pink Lady’ and ‘Honey...

Using ArchE in the Classroom: One Experience

DTIC Science & Technology

2007-09-01

The Architecture Expert (ArchE) tool serves as a software architecture design assistant. It embodies knowledge of quality attributes and the relation...between the achievement of quality attribute requirements and architecture design . This technical note describes the use of a pre-alpha release of

Close relationships and attributions for peer victimization among late adolescents.

PubMed

Chen, Xiaochen; Graham, Sandra

2012-12-01

This study examined the effect of close relationships (best friendship and romantic relationship) on late adolescents' casual attributions for peer victimization. A total of 1106 twelfth grade students completed self-report measures of perceived peer victimization, self-blame attribution, psychological maladjustment (loneliness and social anxiety), and quality of close peer relationships. Results indicated that self-blame partly mediated the link between peer victimization and psychological maladjustment. Relationship quality moderated the victimization-self-blame relation. Participants were more likely to endorse self-blame attributions for peer victimization when they had a negative relationship with a best friend or romantic partner. The moderated effect of negative best friendship quality was only significant for girls, whereas the moderated effect of negative romantic relationship quality was only significant for boys. Implications of these findings for future research on close relations during adolescence and for interventions to reduce the effects of peer victimization were discussed. Copyright © 2012 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Racial/Ethnic Disparities in Primary Care Quality Among Type 2 Diabetes Patients, Medical Expenditure Panel Survey, 2012.

PubMed

Hu, Ruwei; Shi, Leiyu; Liang, Hailun; Haile, Geraldine Pierre; Lee, De-Chih

2016-08-04

Racial and ethnic disparities exist in diabetes prevalence, access to diabetes care, diabetes-related complications and mortality rates, and the quality of diabetes care among Americans. We explored racial and ethnic disparities in primary care quality among Americans with type 2 diabetes. We analyzed data on adults with type 2 diabetes derived from the household component of the 2012 Medical Expenditure Panel Survey. Multiple regression and multivariate logistic regressions were used to examine the association between race/ethnicity and primary care attributes related to first contact, longitudinality, comprehensiveness, and coordination, and clusters of confounding factors were added sequentially. Preliminary findings indicated differences in primary care quality between racial/ethnic minorities and whites across measures of first contact, longitudinality, comprehensiveness, and coordination. After controlling for confounding factors, these differences were no longer apparent; all racial/ethnic categories showed similar rates of primary care quality according to the 4 primary care domains of interest in the study. Results indicate equitable primary care quality for type 2 diabetes patients across 4 key domains of primary care after controlling for socioeconomic characteristics. Additional research is necessary to support these findings, particularly when considering smaller racial/ethnic groups and investigating outcomes related to diabetes.

Quality of Disease Management and Risk of Mortality in English Primary Care Practices

PubMed Central

Dusheiko, Mark; Gravelle, Hugh; Martin, Stephen; Smith, Peter C

2015-01-01

Objective To investigate whether better management of chronic conditions by family practices reduces mortality risk. Data Two random samples of 5 million patients registered with over 8,000 English family practices followed up for 4 years (2004/5–2007/8). Measures of the quality of disease management for 10 conditions were constructed for each family practice for each year. The outcome measure was an indicator taking the value 1 if the patient died during a specified year, 0 otherwise. Study Design Cross-section and multilevel panel data multiple logistic regressions were estimated. Covariates included age, gender, morbidity, hospitalizations, attributed socio-economic characteristics, and local health care supply measures. Principal Findings Although a composite measure of the quality of disease management for all 10 conditions was significantly associated with lower mortality, only the quality of stroke care was significant when all 10 quality measures were entered in the regression. Conclusions The panel data results suggest that a 1 percent improvement in the quality of stroke care could reduce the annual number of deaths in England by 782 [95 percent CI: 423, 1140]. A longer study period may be necessary to detect any mortality impact of better management of other conditions. PMID:25597263

Healthcare Transformation and Changing Roles for Nursing

PubMed Central

Salmond, Susan W.; Echevarria, Mercedes

2017-01-01

Factors driving healthcare transformation include fragmentation, access problems, unsustainable costs, suboptimal outcomes, and disparities. Cost and quality concerns along with changing social and disease-type demographics created the greatest urgency for the need for change. Caring for and paying for medical treatments for patients suffering from chronic health conditions are a significant concern. The Affordable Care Act includes programs now led by the Centers for Medicare & Medicaid Services aiming to improve quality and control cost. Greater coordination of care—across providers and across settings—will improve quality care, improve outcomes, and reduce spending, especially attributed to unnecessary hospitalization, unnecessary emergency department utilization, repeated diagnostic testing, repeated medical histories, multiple prescriptions, and adverse drug interactions. As a nation, we have taken incremental steps toward achieving better quality and lower costs for decades. Nurses are positioned to contribute to and lead the transformative changes that are occurring in healthcare by being a fully contributing member of the interprofessional team as we shift from episodic, provider-based, fee-for-service care to team-based, patient-centered care across the continuum that provides seamless, affordable, and quality care. These shifts require a new or an enhanced set of knowledge, skills, and attitudes around wellness and population care with a renewed focus on patient-centered care, care coordination, data analytics, and quality improvement. PMID:28107295

Fear of cancer recurrence and psychological well-being in women with breast cancer: The role of causal cancer attributions and optimism.

PubMed

Dumalaon-Canaria, J A; Prichard, I; Hutchinson, A D; Wilson, C

2018-01-01

This study aims to examine the association between cancer causal attributions, fear of cancer recurrence (FCR) and psychological well-being and the possible moderating effect of optimism among women with a previous diagnosis of breast cancer. Participants (N = 314) completed an online self-report assessment of causal attributions for their own breast cancer, FCR, psychological well-being and optimism. Simultaneous multiple regression analyses were conducted to explore the overall contribution of causal attributions to FCR and psychological well-being separately. Hierarchical multiple regression analyses were also utilised to examine the potential moderating influence of dispositional optimism on the relationship between causal attributions and FCR and psychological well-being. Causal attributions of environmental exposures, family history and stress were significantly associated with higher FCR. The attribution of stress was also significantly associated with lower psychological well-being. Optimism did not moderate the relationship between causal attributions and FCR or well-being. The observed relationships between causal attributions for breast cancer and FCR and psychological well-being suggest that the inclusion of causal attributions in screening for FCR is potentially important. Health professionals may need to provide greater psychological support to women who attribute their cancer to non-modifiable causes and consequently continue to experience distress. © 2016 John Wiley & Sons Ltd.

Factors Affecting Quality and Health Promoting Compounds during Growth and Postharvest Life of Sweet Cherry (Prunus avium L.)

PubMed Central

Correia, Sofia; Schouten, Rob; Silva, Ana P.; Gonçalves, Berta

2017-01-01

Sweet cherries are attractive fruits due to their taste, color, nutritional value, and beneficial health effects. Sweet cherry is a highly perishable fruit and all quality attributes and the level of health promoting compounds are affected by growth conditions, picking, packing, transport, and storage. During production, the correct combination of scion × rootstock will produce fruits with higher firmness, weight, sugars, vitamins, and phenolic compounds that boost the fruit antioxidant activity. Orchard management, such as applying drip irrigation and summer pruning, will increase fruit sugar levels and total phenolic content, while application of growth regulators can result in improved storability, increased red coloring, increased fruit size, and reduced cracking. Salicylic acid, oxalic acid, acetylsalicylic acid, and methyl salicylate are promising growth regulators as they also increase total phenolics, anthocyanins, and induce higher activity of antioxidant enzymes. These growth regulators are now also applied as fruit coatings that improve shelf-life with higher antioxidant enzyme activities and total phenolics. Optimizing storage and transport conditions, such as hydro cooling with added CaCl2, chain temperature and relative humidity control, are crucial for slowing down decay of quality attributes and increasing the antioxidant capacity. Application of controlled atmosphere during storage is successful in delaying quality attributes, but lowers ascorbic acid levels. The combination of low temperature storage in combination with modified atmosphere packaging (MAP) is successful in reducing the incidence of fruit decay, while preserving taste attributes and stem color with a higher antioxidant capacity. A new trend in MAP is the use of biodegradable films such as micro-perforated polylactic acid film that combine significant retention of quality attributes, high consumer acceptability, and a reduced environmental footprint. Another trend is to replace MAP with fruit edible coatings. Edible coatings, such as various lipid composite coatings, have advantages in retaining quality attributes and increasing the antioxidant activity (chitosan) and are regarded as approved food additives, although studies regarding consumer acceptance are needed. The recent publication of the sweet cherry genome will likely increase the identification of more candidate genes involved in growing and maintaining health related compounds and quality attributes. PMID:29312407

A Consideration of Quality-Attribute-Property for Interoperability of Quality Data

NASA Astrophysics Data System (ADS)

Tarumi, Shinya; Kozaki, Kouji; Kitamura, Yoshinobu; Mizoguchi, Riichiro

Descriptions of attribute and quality are essential elements in ontology developments. Needless to say, science data are description of attributes of target things and it is an important role of ontology to support the validity of and interoperability between the description. Although some upper ontologies such as DOLCE, BFO, etc. are already developed and extensively used, a careful examination reveals some rooms for improvement of them. While each ontology covers quality and quantity, the mutual interchangeability among these ontologies is not considered because each has been designed intended to develop a ``correct'' ontology of quality and quantity. Furthermore, due to variety of ways of data description, no single ontology can cover all the existing scientific data. In this paper, we investigate ``quality'' and ``value'' from an ontological viewpoint and propose a conceptual framework to deal with attribute, property and quality appearing in existing data descriptions in the nanotechnology domain. This framework can be considered as a reference ontology for describing quality with existing upper ontology. Furthermore, on the basis of the results of the consideration, we evaluate and refine a conceptual hierarchy of materials functions which has been built by nanomaterials researchers. Through the evaluation process, we discuss an effect of the definition of a conceptual framework for building/refining ontology. Such conceptual consideration about quality and value is not only the problem in nanomaterials domain but also a first step toward advancement of an intelligent sharing of scientific data in e-Science.

Enhanced Decision Analysis Support System.

DTIC Science & Technology

1981-03-01

autorrares "i., the method for determining preferences when multiple and competing attributes are involved. Worth assessment is used as the model which...1967 as a method for determining preferenoe when multiple and competing attributes are involved (Rf 10). The tern worth can be - equated to other... competing objectives. After some discussion, the group decided that the problem could best be decided using the worth assessment procedure. They

A Novel Hybrid MADM Based Competence Set Expansions of a SOC Design Service Firm

NASA Astrophysics Data System (ADS)

Huang, Chi-Yo; Tzeng, Gwo-Hshiung; Lue, Yeou-Feng; Chuang, Hsiu-Tyan

As the IC (integrated circuit) industry migrates to the System-on-Chip (SOC) era, a novel business model, the SOC design service (DS), is emerging. However, how to expand a firm’s innovation competences while satisfying multiple objectives including highest quality, lowest cost, and fastest time to market as well as most revenues for economics of scale are always problems for a design service firm. Therefore, attempts to expand the innovation competences, and thus the competitiveness, of latecomers in the SOC DS industry have already become the most critical issue facing the top managers of SOC design service firms. In this paper, a novel multiple attribute decision making (MADM) analytic framework based on the concept of competence set expansion, as well as MADM methods consisting with DEMATEL, ANP and multiple objective decision making (MODM) will be proposed in order to define a path for expanding a late-coming SOC DS firm’s innovation capabilities. An empirical study on expanding innovation competence sets, of a late-coming Taiwanese DS firm then will be presented.

A case study: application of statistical process control tool for determining process capability and sigma level.

PubMed

Chopra, Vikram; Bairagi, Mukesh; Trivedi, P; Nagar, Mona

2012-01-01

Statistical process control is the application of statistical methods to the measurement and analysis of variation process. Various regulatory authorities such as Validation Guidance for Industry (2011), International Conference on Harmonisation ICH Q10 (2009), the Health Canada guidelines (2009), Health Science Authority, Singapore: Guidance for Product Quality Review (2008), and International Organization for Standardization ISO-9000:2005 provide regulatory support for the application of statistical process control for better process control and understanding. In this study risk assessments, normal probability distributions, control charts, and capability charts are employed for selection of critical quality attributes, determination of normal probability distribution, statistical stability, and capability of production processes, respectively. The objective of this study is to determine tablet production process quality in the form of sigma process capability. By interpreting data and graph trends, forecasting of critical quality attributes, sigma process capability, and stability of process were studied. The overall study contributes to an assessment of process at the sigma level with respect to out-of-specification attributes produced. Finally, the study will point to an area where the application of quality improvement and quality risk assessment principles for achievement of six sigma-capable processes is possible. Statistical process control is the most advantageous tool for determination of the quality of any production process. This tool is new for the pharmaceutical tablet production process. In the case of pharmaceutical tablet production processes, the quality control parameters act as quality assessment parameters. Application of risk assessment provides selection of critical quality attributes among quality control parameters. Sequential application of normality distributions, control charts, and capability analyses provides a valid statistical process control study on process. Interpretation of such a study provides information about stability, process variability, changing of trends, and quantification of process ability against defective production. Comparative evaluation of critical quality attributes by Pareto charts provides the least capable and most variable process that is liable for improvement. Statistical process control thus proves to be an important tool for six sigma-capable process development and continuous quality improvement.

Multiple aspects of high school students' strategic processing on reading outcomes: The role of quantity, quality, and conjunctive strategy use.

PubMed

Parkinson, Meghan M; Dinsmore, Daniel L

2018-03-01

While the literature on strategy use is relatively mature, measures of strategy use overwhelmingly measure only one aspect of that use, frequency, when relating that strategy use to performance outcomes. While this might be one important attribute of strategy use, there is increasing evidence that quality and conditional use of cognitive and metacognitive strategies may also be important. This study examines how multiple aspects of strategy use, namely frequency, quality, and conjunctive use of strategies, influence task performance on both well- and ill-structured task outcomes in addition to other concomitant variables that may interact with strategic processing during reading. The sample consisted of 21 high school students enrolled in an upper-level biology class in a suburban school in the north-eastern United States. These participants completed measures of prior knowledge and interest, then read either an expository or persuasive text while thinking aloud. They then completed a passage recall and open-ended response following passage completion. In general, quantity was not positively related to the study outcomes and was negatively related to one of them. Quality of strategy use, on the other hand, was consistently related to positive reading outcomes. The influence of knowledge and interest in terms of strategies is also discussed as well as six cases which illustrate the relation of aspects of strategy use and the other concomitant variables. Evaluating strategy use by solely examining the frequency of strategy use did not explain differences in task performance as well as evaluating the quality and conjunctive use of strategies. Further, important relations between prior knowledge, interest, and the task outcomes appeared to be mediated and moderated by the aspects of strategy use investigated. © 2017 The British Psychological Society.

Attributional (Explanatory) Thinking about Failure in New Achievement Settings

ERIC Educational Resources Information Center

Perry, Raymond P.; Stupnisky, Robert H.; Daniels, Lia M.; Haynes, Tara L.

2008-01-01

Attributional (explanatory) thinking involves the appraisal of factors that contribute to performance and is instrumental to motivation and goal striving. Little is understood, however, concerning attributional thinking when multiple causes are involved in the transition to new achievement settings. Our study examined such complex attributional…

Effect of Novel Starter Culture on Reduction of Biogenic Amines, Quality Improvement, and Sensory Properties of Doenjang, a Traditional Korean Soybean Fermented Sauce Variety.

PubMed

Shukla, Shruti; Lee, Jong Suk; Park, Hae-Kyong; Yoo, Jung-Ah; Hong, Sung-Yong; Kim, Jong-Kyu; Kim, Myunghee

2015-08-01

To select appropriate microorganisms as starter cultures for the reliable and reproducible fermentation of soybean fermented products of Korean Doenjang, various ratios of fungi (Aspergillus oryzae J, Mucor racemosus 15, M. racemosus 42) combined with Bacillus subtilis TKSP 24 were selected as either single, double, or multiple Meju strains for commercial mass production of Doenjang, followed by analysis of sensory characteristics. In the sensory evaluation, Doenjang BAM15-1 and BAM42-1, which were fermented with multiple strains (1:1:1), showed the highest sensory scores as compared to control. Based on sensory characteristics, 6 Doenjang samples were subjected to quantitative determination of amino acids, free sugars, and organic acids (volatile and nonvolatile) contents, followed by determination of biogenic amines. Total sweet taste amino acid contents were highest in BAM15-1 and BAM42-1 samples (333.7 and 295.8 mg/100 g, respectively) and similar that of control (391.1 mg/100 g). Samples BAM15-1 and BAM42-1 showed the relatively high volatile and nonvolatile organic acid contents (154.24, 192.26, and 71.31, 82.42 mg/100 g, respectively). In addition, BAM15-1 and BAM42-1 showed negligible biogenic amine formation, ranging from 0.00 to 1.02 and 0.00 to 3.92 mg/100 g, respectively. These findings indicate that determination of food components along with sensory and quality attributes using multiple microbial Meju strains as a starter culture may provide substantial results on improved quality fermented Doenjang products. © 2015 Institute of Food Technologists®

Accurate prediction of personalized olfactory perception from large-scale chemoinformatic features.

PubMed

Li, Hongyang; Panwar, Bharat; Omenn, Gilbert S; Guan, Yuanfang

2018-02-01

The olfactory stimulus-percept problem has been studied for more than a century, yet it is still hard to precisely predict the odor given the large-scale chemoinformatic features of an odorant molecule. A major challenge is that the perceived qualities vary greatly among individuals due to different genetic and cultural backgrounds. Moreover, the combinatorial interactions between multiple odorant receptors and diverse molecules significantly complicate the olfaction prediction. Many attempts have been made to establish structure-odor relationships for intensity and pleasantness, but no models are available to predict the personalized multi-odor attributes of molecules. In this study, we describe our winning algorithm for predicting individual and population perceptual responses to various odorants in the DREAM Olfaction Prediction Challenge. We find that random forest model consisting of multiple decision trees is well suited to this prediction problem, given the large feature spaces and high variability of perceptual ratings among individuals. Integrating both population and individual perceptions into our model effectively reduces the influence of noise and outliers. By analyzing the importance of each chemical feature, we find that a small set of low- and nondegenerative features is sufficient for accurate prediction. Our random forest model successfully predicts personalized odor attributes of structurally diverse molecules. This model together with the top discriminative features has the potential to extend our understanding of olfactory perception mechanisms and provide an alternative for rational odorant design.

Genetic and cultural management solutions to improve potato storage quality

USDA-ARS?s Scientific Manuscript database

Potato storage quality is most easily described in terms of tuber attributes that maintain the value of the harvested crop. Among these attributes are attractive appearance, low shrink, low incidence of bruising and, for chip and fry processing varieties, specific gravity and reducing sugars appropr...

Measuring Website Quality: Asymmetric Effect of User Satisfaction

ERIC Educational Resources Information Center

Kincl, Tomas; Strach, Pavel

2012-01-01

Website quality measurement tools have been largely static and have struggled to determine relevant attributes of user satisfaction. This study compares and contrasts attributes of user satisfaction based on usability guidelines seeking to identify practical easy-to-administer measurement tools. The website users assessed business school homepages…

Using a multidimensional unfolding approach to assess multiple sclerosis patient preferences for disease-modifying therapy: a pilot study

PubMed Central

Sempere, Angel Perez; Vera-Lopez, Vanesa; Gimenez-Martinez, Juana; Ruiz-Beato, Elena; Cuervo, Jesús; Maurino, Jorge

2017-01-01

Purpose Multidimensional unfolding is a multivariate method to assess preferences using a small sample size, a geometric model locating individuals and alternatives as points in a joint space. The objective was to evaluate relapsing–remitting multiple sclerosis (RRMS) patient preferences toward key disease-modifying therapy (DMT) attributes using multidimensional unfolding. Patients and methods A cross-sectional pilot study in RRMS patients was conducted. Drug attributes included relapse prevention, disease progression prevention, side-effect risk and route and schedule of administration. Assessment of preferences was performed through a five-card game. Patients were asked to value attributes from 1 (most preferred) to 5 (least preferred). Results A total of 37 patients were included; the mean age was 38.6 years, and 78.4% were female. Disease progression prevention was the most important factor (51.4%), followed by relapse prevention (40.5%). The frequency of administration had the lowest preference rating for 56.8% of patients. Finally, 19.6% valued the side-effect risk attribute as having low/very low importance. Conclusion Patients’ perspective for DMT attributes may provide valuable information to facilitate shared decision-making. Efficacy attributes were the most important drug characteristics for RRMS patients. Multidimensional unfolding seems to be a feasible approach to assess preferences in multiple sclerosis patients. Further elicitation studies using multidimensional unfolding with other stated choice methods are necessary to confirm these findings. PMID:28615928

Multiplicative mixing of object identity and image attributes in single inferior temporal neurons.

PubMed

Ratan Murty, N Apurva; Arun, S P

2018-04-03

Object recognition is challenging because the same object can produce vastly different images, mixing signals related to its identity with signals due to its image attributes, such as size, position, rotation, etc. Previous studies have shown that both signals are present in high-level visual areas, but precisely how they are combined has remained unclear. One possibility is that neurons might encode identity and attribute signals multiplicatively so that each can be efficiently decoded without interference from the other. Here, we show that, in high-level visual cortex, responses of single neurons can be explained better as a product rather than a sum of tuning for object identity and tuning for image attributes. This subtle effect in single neurons produced substantially better population decoding of object identity and image attributes in the neural population as a whole. This property was absent both in low-level vision models and in deep neural networks. It was also unique to invariances: when tested with two-part objects, neural responses were explained better as a sum than as a product of part tuning. Taken together, our results indicate that signals requiring separate decoding, such as object identity and image attributes, are combined multiplicatively in IT neurons, whereas signals that require integration (such as parts in an object) are combined additively. Copyright © 2018 the Author(s). Published by PNAS.

Textural, nutritional and functional attributes in tomato genotypes for breeding better quality varieties.

PubMed

Saha, Supradip; Hedau, Nirmal K; Mahajan, Vinay; Singh, Gyanendra; Gupta, Hari S; Gahalain, Anita

2010-01-30

Screening of natural biodiversity for their better quality attributes is of prime importance for quality breeding programmes. A set of 53 tomato genotypes was measured for their textural [skin firmness, pericarp thickness, total soluble solids (TSS)], nutritional [phosphorus (P), potassium (K), iron (Fe), zinc (Zn), copper (Cu), manganese (Mn) and titrable acidity (TA)] and functional (beta-carotene, lycopene and ascorbic acid) quality attributes. Three sets of data (textural, nutritional and functional attributes) were obtained and analysed for their mutual relationships. Wide variations were observed in most of the measurements, e.g. skin firmness (coefficient of variability (CV) 269-612 g), pericarp thickness (CV 1.4-4.9 mm), potassium (CV 229-371 mg 100 g(-1)), iron (CV 611-1772 mg 100 g(-1)), ascorbic acid (CV 12-86 mg 100 g(-1)), suggesting that there are considerable levels of genetic diversity. Significant correlations (P < 0.05, 0.01) were also detected among different attributes of tomato genotypes, such as phosphorus and zinc with a correlation coefficient of 0.74, ascorbic acid and copper of 0.57, pericarp thickness and lycopene of - 0.52. However, there were no correlations between textural and nutritional attributes. Five factors were computed by principal component analysis that explained 66% of the variation in the attributes, among which all micronutrients other than iron, TSS, firmness and beta-carotene were most important. Functional attributes except beta-carotene played a less important role in explaining total variation. This knowledge could aid in the efficient conservation of important parts of the agricultural biodiversity of India. These results are also potentially useful for tomato breeders working on the development of new varieties. (c) 2009 Society of Chemical Industry.

Real-time product attribute control to manufacture antibodies with defined N-linked glycan levels.

PubMed

Zupke, Craig; Brady, Lowell J; Slade, Peter G; Clark, Philip; Caspary, R Guy; Livingston, Brittney; Taylor, Lisa; Bigham, Kyle; Morris, Arvia E; Bailey, Robert W

2015-01-01

Pressures for cost-effective new therapies and an increased emphasis on emerging markets require technological advancements and a flexible future manufacturing network for the production of biologic medicines. The safety and efficacy of a product is crucial, and consistent product quality is an essential feature of any therapeutic manufacturing process. The active control of product quality in a typical biologic process is challenging because of measurement lags and nonlinearities present in the system. The current study uses nonlinear model predictive control to maintain a critical product quality attribute at a predetermined value during pilot scale manufacturing operations. This approach to product quality control ensures a more consistent product for patients, enables greater manufacturing efficiency, and eliminates the need for extensive process characterization by providing direct measures of critical product quality attributes for real time release of drug product. © 2015 American Institute of Chemical Engineers.

Oral diseases associated with condition-specific oral health-related quality of life and school performance of Thai primary school children: A hierarchical approach.

PubMed

Kaewkamnerdpong, Issarapong; Krisdapong, Sudaduang

2018-06-01

To assess the hierarchical associations between children's school performance and condition-specific (CS) oral health-related quality of life (OHRQoL), school absence, oral status, sociodemographic and economic status (SDES) and social capital; and to investigate the associations between CS OHRQoL and related oral status, adjusting for SDES and social capital. Data on 925 sixth grade children in Sakaeo province, Thailand, were collected through oral examinations for dental caries and oral hygiene, social capital questionnaires, OHRQoL interviews using the Child-Oral Impacts on Daily Performances index, parental self-administered questionnaires and school documents. A hierarchical conceptual framework was developed, and independent variables were hierarchically entered into multiple logistic models for CS OHRQoL and linear regression models for school performance. After adjusting for SDES and social capital, children with high DMFT or DT scores were significantly threefold more likely to have CS impacts attributed to dental caries. However, poor oral hygiene was not significantly associated with CS impacts attributed to gingival disease. High DMFT scores were significantly associated with lower school performance, whereas high Simplified Oral Hygiene Index scores were not. The final model showed that CS impacts attributed to dental caries and school absence accounted for the association between DMFT score and school performance. Dental caries was associated with CS impacts on OHRQoL, and exerted its effect on school performance through the CS impacts and school absence. There was no association between oral hygiene and CS impacts on OHRQoL or school performance. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Perceived Competence and Depressive Symptoms among Adolescents: The Moderating Role of Attributional Style

ERIC Educational Resources Information Center

Kim-Spoon, Jungmeen; Ollendick, Thomas H.; Seligman, Laura D.

2012-01-01

This longitudinal study examined the interactive effects of depressive attributional style and multiple domains of perceived competence on depressive symptoms among 431 adolescents. Our structural equation modeling with latent factor interactions indicated that (1) for girls with a higher depressive attributional style, lower perceived competence…

FDA perspective on specifications for biotechnology products--from IND to PLA.

PubMed

Murano, G

1997-01-01

Quality standards are obligatory throughout development, approval and post-marketing phases of biotechnology-derived products, thus assuring product identity, purity, and potency/strength. The process of developing and setting specifications should be based on sound science and should represent a logical progression of actions based on the use of experiential data spanning manufacturing process validation, consistency in production, and characterization of relevant product properties/attributes, by multiple analytical means. This interactive process occurs in phases, varying in rigour. It is best described as encompassing a framework which starts with the implementation of realistic/practical operational quality limits, progressing to the establishment/adoption of more stringent specifications. The historical database is generated from preclinical, toxicology and early clinical lots. This supports the clinical development programme which, as it progresses, allows for further assay method validation/refinement, adoption/addition due to relevant or newly recognized product attributes or rejection due to irrelevance. In the next phase, (licensing/approval) specifications are set through extended experience and validation of both the preparative and analytical processes, to include availability of suitable reference standards and extensive product characterization throughout its proposed dating period. Subsequent to product approval, the incremental database of test results serves as a natural continuum for further evolving/refining specifications. While there is considerable latitude in the kinds of testing modalities finally adopted to establish product quality on a routine basis, for both drugs and drug products, it is important that the selection takes into consideration relevant (significant) product characteristics that appropriately reflect on identity, purity and potency.

Applying image quality in cell phone cameras: lens distortion

NASA Astrophysics Data System (ADS)

Baxter, Donald; Goma, Sergio R.; Aleksic, Milivoje

2009-01-01

This paper describes the framework used in one of the pilot studies run under the I3A CPIQ initiative to quantify overall image quality in cell-phone cameras. The framework is based on a multivariate formalism which tries to predict overall image quality from individual image quality attributes and was validated in a CPIQ pilot program. The pilot study focuses on image quality distortions introduced in the optical path of a cell-phone camera, which may or may not be corrected in the image processing path. The assumption is that the captured image used is JPEG compressed and the cellphone camera is set to 'auto' mode. As the used framework requires that the individual attributes to be relatively perceptually orthogonal, in the pilot study, the attributes used are lens geometric distortion (LGD) and lateral chromatic aberrations (LCA). The goal of this paper is to present the framework of this pilot project starting with the definition of the individual attributes, up to their quantification in JNDs of quality, a requirement of the multivariate formalism, therefore both objective and subjective evaluations were used. A major distinction in the objective part from the 'DSC imaging world' is that the LCA/LGD distortions found in cell-phone cameras, rarely exhibit radial behavior, therefore a radial mapping/modeling cannot be used in this case.

Defining Hardwood Veneer Log Quality Attributes

Treesearch

Jan Wiedenbeck; Michael Wiemann; Delton Alderman; John Baumgras; William Luppold

2004-01-01

This publication provides a broad spectrum of information on the hardwood veneer industry in North America. Veneer manufacturers and their customers impose guidelines in specifying wood quality attributes that are very discriminating but poorly defined (e.g., exceptional color, texture, and/or figure characteristics). To better understand and begin to define the most...

Biases in Quality Attribution to Mother-Child and Caregiver-Child Interaction.

ERIC Educational Resources Information Center

Shpancer, Noam; Britner, Preston A.

1995-01-01

Examined the possible existence, direction, and nature of subconscious, cognitive biases in participants' quality attributions to maternal and nonmaternal child-care interactions, the relationship of such biases to subject's background, and their attitudes toward child care and maternal employment. Potential explanations for the biases and the…

Monsters, Lovers and Former Friends: Exploring Relationships with Mathematics via Personification

ERIC Educational Resources Information Center

Zazkis, Dov

2015-01-01

Personification is the attribution of human qualities to non-human entities. The method of eliciting personification, which requires participants to attribute human qualities to non-human entities, takes advantage of a naturally occurring means through which (some) people discuss the emotional relationship they have with those entities. Eliciting…

Characterizing CO and NOy Sources and Relative Ambient Ratios in the Baltimore Area Using Ambient Measurements and Source Attribution Modeling

EPA Science Inventory

Modeled source attribution information from the Community Multiscale Air Quality model was coupled with ambient data from the 2011 Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality Baltimore field study. We assess ...

The Role of Negative Affect in the Assessment of Quality of Life among Women with Type 1 Diabetes Mellitus

PubMed Central

Gawlik, Nicola R.

2018-01-01

Background The purpose of this study is to determine the impact of negative affect (defined in terms of lack of optimism, depressogenic attributional style, and hopelessness depression) on the quality of life of women with type 1 diabetes mellitus. Methods Participants (n=177) completed either an online or paper questionnaire made available to members of Australian diabetes support groups. Measures of optimism, attributional style, hopelessness depression, disease-specific data, and diabetes-related quality of life were sought. Bivariate correlations informed the construction of a structural equation model. Results Participants were 36.3±11.3 years old, with a disease duration of 18.4±11.2 years. Age and recent glycosylated hemoglobin readings were significant contextual variables in the model. All bivariate associations involving the components of negative affect were as hypothesized. That is, poorer quality of life was associated with a greater depressogenic attributional style, higher hopelessness depression, and lower optimism. The structural equation model demonstrated significant direct effects of depressogenic attributional style and hopelessness depression on quality of life, while (lack of) optimism contributed to quality of life indirectly by way of these variables. Conclusion The recognition of negative affect presentations among patients, and an understanding of its relevance to diabetes-related quality of life, is a valuable tool for the practitioner. PMID:29199406

Carbohydrate intake, obesity, metabolic syndrome and cancer risk? A two-part systematic review and meta-analysis protocol to estimate attributability

PubMed Central

Sartorius, B; Sartorius, K; Aldous, C; Madiba, T E; Stefan, C; Noakes, T

2016-01-01

Introduction Linkages between carbohydrates, obesity and cancer continue to demonstrate conflicting results. Evidence suggests inconclusive direct linkages between carbohydrates and specific cancers. Conversely, obesity has been strongly linked to a wide range of cancers. The purpose of the study is to explore linkages between carbohydrate intake and cancer types using a two-step approach. First the study will evaluate the linkages between carbohydrate intake and obesity, potentially stratified by metabolic syndrome status. Second, the estimated attributable fraction of obesity ascribed to carbohydrate intake will be multiplied against obesity attributable fractions for cancer types to give estimated overall attributable fraction for carbohydrate versus cancer type. Methods and analysis We will perform a comprehensive search to identify all possible published and unpublished studies that have assessed risk factors for obesity including dietary carbohydrate intake. Scientific databases, namely PubMed MEDLINE, EMBASE, EBSCOhost and ISI Web of Science will be searched. Following study selection, paper/data acquisition, and data extraction and synthesis, we will appraise the quality of studies and risk of bias, as well as assess heterogeneity. Meta-weighted attributable fractions of obesity due to carbohydrate intake will be estimated after adjusting for other potential confounding factors (eg, physical inactivity, other dietary intake). Furthermore, previously published systematic reviews assessing the cancer-specific risk associated with obesity will also be drawn. These estimates will be linked with the attributability of carbohydrate intake in part 1 to estimate the cancer-specific burden that can be attributed to dietary carbohydrates. This systematic review protocol has been developed according to the ‘Preferred Reporting Items for Systematic review and Meta-Analysis Protocols (PRISMA-P) 2015’. Ethics and dissemination The current study will be based on published literature and data, and, as such, ethics approval is not required. The final results of this two part systematic review (plus multiplicative calculations) will be published in a relevant international peer-reviewed journal. Trial registration number PROSPERO CRD42015023257. PMID:26729382

Attributional Style and Depression in Multiple Sclerosis

PubMed Central

Arnett, Peter A.

2013-01-01

Several etiologic theories have been proposed to explain depression in the general population. Studying these models and modifying them for use in the multiple sclerosis (MS) population may allow us to better understand depression in MS. According to the reformulated learned helplessness (LH) theory, individuals who attribute negative events to internal, stable, and global causes are more vulnerable to depression. This study differentiated attributional style that was or was not related to MS in 52 patients with MS to test the LH theory in this population and to determine possible differences between illness-related and non-illness-related attributions. Patients were administered measures of attributional style, daily stressors, disability, and depressive symptoms. Participants were more likely to list non-MS-related than MS-related causes of negative events on the Attributional Style Questionnaire (ASQ), and more-disabled participants listed significantly more MS-related causes than did less-disabled individuals. Non-MS-related attributional style correlated with stress and depressive symptoms, but MS-related attributional style did not correlate with disability or depressive symptoms. Stress mediated the effect of non-MS-related attributional style on depressive symptoms. These results suggest that, although attributional style appears to be an important construct in MS, it does not seem to be related directly to depressive symptoms; rather, it is related to more perceived stress, which in turn is related to increased depressive symptoms. PMID:24453767

Attributional style and depression in multiple sclerosis: the learned helplessness model.

PubMed

Vargas, Gray A; Arnett, Peter A

2013-01-01

Several etiologic theories have been proposed to explain depression in the general population. Studying these models and modifying them for use in the multiple sclerosis (MS) population may allow us to better understand depression in MS. According to the reformulated learned helplessness (LH) theory, individuals who attribute negative events to internal, stable, and global causes are more vulnerable to depression. This study differentiated attributional style that was or was not related to MS in 52 patients with MS to test the LH theory in this population and to determine possible differences between illness-related and non-illness-related attributions. Patients were administered measures of attributional style, daily stressors, disability, and depressive symptoms. Participants were more likely to list non-MS-related than MS-related causes of negative events on the Attributional Style Questionnaire (ASQ), and more-disabled participants listed significantly more MS-related causes than did less-disabled individuals. Non-MS-related attributional style correlated with stress and depressive symptoms, but MS-related attributional style did not correlate with disability or depressive symptoms. Stress mediated the effect of non-MS-related attributional style on depressive symptoms. These results suggest that, although attributional style appears to be an important construct in MS, it does not seem to be related directly to depressive symptoms; rather, it is related to more perceived stress, which in turn is related to increased depressive symptoms.

A common perceptual temporal limit of binding synchronous inputs across different sensory attributes and modalities

PubMed Central

Fujisaki, Waka; Nishida, Shin'ya

2010-01-01

The human brain processes different aspects of the surrounding environment through multiple sensory modalities, and each modality can be subdivided into multiple attribute-specific channels. When the brain rebinds sensory content information (‘what’) across different channels, temporal coincidence (‘when’) along with spatial coincidence (‘where’) provides a critical clue. It however remains unknown whether neural mechanisms for binding synchronous attributes are specific to each attribute combination, or universal and central. In human psychophysical experiments, we examined how combinations of visual, auditory and tactile attributes affect the temporal frequency limit of synchrony-based binding. The results indicated that the upper limits of cross-attribute binding were lower than those of within-attribute binding, and surprisingly similar for any combination of visual, auditory and tactile attributes (2–3 Hz). They are unlikely to be the limits for judging synchrony, since the temporal limit of a cross-attribute synchrony judgement was higher and varied with the modality combination (4–9 Hz). These findings suggest that cross-attribute temporal binding is mediated by a slow central process that combines separately processed ‘what’ and ‘when’ properties of a single event. While the synchrony performance reflects temporal bottlenecks existing in ‘when’ processing, the binding performance reflects the central temporal limit of integrating ‘when’ and ‘what’ properties. PMID:20335212

Effect of Frozen Storage Temperature on the Quality of Premium Ice Cream.

PubMed

Park, Sung Hee; Jo, Yeon-Ji; Chun, Ji-Yeon; Hong, Geun-Pyo; Davaatseren, Munkhtugs; Choi, Mi-Jung

2015-01-01

The market sales of premium ice cream have paralleled the growth in consumer desire for rich flavor and taste. Storage temperature is a major consideration in preserving the quality attributes of premium ice cream products for both the manufacturer and retailers during prolonged storage. We investigated the effect of storage temperature (-18℃, -30℃, -50℃, and -70℃) and storage times, up to 52 wk, on the quality attributes of premium ice cream. Quality attributes tested included ice crystal size, air cell size, melting resistance, and color. Ice crystal size increased from 40.3 μm to 100.1 μm after 52 wk of storage at -18℃. When ice cream samples were stored at -50℃ or -70℃, ice crystal size slightly increased from 40.3 μm to 57-58 μm. Initial air cell size increased from 37.1 μm to 87.7 μm after storage at -18℃ for 52 wk. However, for storage temperatures of -50℃ and -70℃, air cell size increased only slightly from 37.1 μm to 46-47 μm. Low storage temperature (-50℃ and -70℃) resulted in better melt resistance and minimized color changes in comparison to high temperature storage (-18℃ and -30℃). In our study, quality changes in premium ice cream were gradually minimized according to decrease in storage temperature up to-50℃. No significant beneficial effect of -70℃ storage was found in quality attributes. In the scope of our experiment, we recommend a storage temperature of -50℃ to preserve the quality attributes of premium ice cream.

Effect of Frozen Storage Temperature on the Quality of Premium Ice Cream

PubMed Central

Park, Sung Hee; Jo, Yeon-Ji; Chun, Ji-Yeon; Hong, Geun-Pyo

2015-01-01

The market sales of premium ice cream have paralleled the growth in consumer desire for rich flavor and taste. Storage temperature is a major consideration in preserving the quality attributes of premium ice cream products for both the manufacturer and retailers during prolonged storage. We investigated the effect of storage temperature (−18℃, −30℃, −50℃, and −70℃) and storage times, up to 52 wk, on the quality attributes of premium ice cream. Quality attributes tested included ice crystal size, air cell size, melting resistance, and color. Ice crystal size increased from 40.3 μm to 100.1 μm after 52 wk of storage at −18℃. When ice cream samples were stored at −50℃ or −70℃, ice crystal size slightly increased from 40.3 μm to 57-58 μm. Initial air cell size increased from 37.1 μm to 87.7 μm after storage at −18℃ for 52 wk. However, for storage temperatures of −50℃ and −70℃, air cell size increased only slightly from 37.1 μm to 46-47 μm. Low storage temperature (−50℃ and −70℃) resulted in better melt resistance and minimized color changes in comparison to high temperature storage (−18℃ and −30℃). In our study, quality changes in premium ice cream were gradually minimized according to decrease in storage temperature up to−50℃. No significant beneficial effect of −70℃ storage was found in quality attributes. In the scope of our experiment, we recommend a storage temperature of −50℃ to preserve the quality attributes of premium ice cream. PMID:26877639

Influence of raw material properties upon critical quality attributes of continuously produced granules and tablets.

PubMed

Fonteyne, Margot; Wickström, Henrika; Peeters, Elisabeth; Vercruysse, Jurgen; Ehlers, Henrik; Peters, Björn-Hendrik; Remon, Jean Paul; Vervaet, Chris; Ketolainen, Jarkko; Sandler, Niklas; Rantanen, Jukka; Naelapää, Kaisa; De Beer, Thomas

2014-07-01

Continuous manufacturing gains more and more interest within the pharmaceutical industry. The International Conference of Harmonisation (ICH) states in its Q8 'Pharmaceutical Development' guideline that the manufacturer of pharmaceuticals should have an enhanced knowledge of the product performance over a range of raw material attributes, manufacturing process options and process parameters. This fits further into the Process Analytical Technology (PAT) and Quality by Design (QbD) framework. The present study evaluates the effect of variation in critical raw material properties on the critical quality attributes of granules and tablets, produced by a continuous from-powder-to-tablet wet granulation line. The granulation process parameters were kept constant to examine the differences in the end product quality caused by the variability of the raw materials properties only. Theophylline-Lactose-PVP (30-67.5-2.5%) was used as model formulation. Seven different grades of theophylline were granulated. Afterward, the obtained granules were tableted. Both the characteristics of granules and tablets were determined. The results show that differences in raw material properties both affect their processability and several critical quality attributes of the resulting granules and tablets. Copyright © 2014 Elsevier B.V. All rights reserved.

Use of structured decision making to identify monitoring variables and management priorities for salt marsh ecosystems

USGS Publications Warehouse

Neckles, Hilary A.; Lyons, James E.; Guntenspergen, Glenn R.; Shriver, W. Gregory; Adamowicz, Susan C.

2015-01-01

Most salt marshes in the USA have been degraded by human activities, and coastal managers are faced with complex choices among possible actions to restore or enhance ecosystem integrity. We applied structured decision making (SDM) to guide selection of monitoring variables and management priorities for salt marshes within the National Wildlife Refuge System in the northeastern USA. In general, SDM is a systematic process for decomposing a decision into its essential elements. We first engaged stakeholders in clarifying regional salt marsh decision problems, defining objectives and attributes to evaluate whether objectives are achieved, and developing a pool of alternative management actions for achieving objectives. Through this process, we identified salt marsh attributes that were applicable to monitoring National Wildlife Refuges on a regional scale and that targeted management needs. We then analyzed management decisions within three salt marsh units at Prime Hook National Wildlife Refuge, coastal Delaware, as a case example of prioritizing management alternatives. Values for salt marsh attributes were estimated from 2 years of baseline monitoring data and expert opinion. We used linear value modeling to aggregate multiple attributes into a single performance score for each alternative, constrained optimization to identify alternatives that maximized total management benefits subject to refuge-wide cost constraints, and used graphical analysis to identify the optimal set of alternatives for the refuge. SDM offers an efficient, transparent approach for integrating monitoring into management practice and improving the quality of management decisions.

Understanding diagnostic variability in breast pathology: lessons learned from an expert consensus review panel

PubMed Central

Allison, Kimberly H; Reisch, Lisa M; Carney, Patricia A; Weaver, Donald L; Schnitt, Stuart J; O’Malley, Frances P; Geller, Berta M; Elmore, Joann G

2015-01-01

Aims To gain a better understanding of the reasons for diagnostic variability, with the aim of reducing the phenomenon. Methods and results In preparation for a study on the interpretation of breast specimens (B-PATH), a panel of three experienced breast pathologists reviewed 336 cases to develop consensus reference diagnoses. After independent assessment, cases coded as diagnostically discordant were discussed at consensus meetings. By the use of qualitative data analysis techniques, transcripts of 16 h of consensus meetings for a subset of 201 cases were analysed. Diagnostic variability could be attributed to three overall root causes: (i) pathologist-related; (ii) diagnostic coding/study methodology-related; and (iii) specimen-related. Most pathologist-related root causes were attributable to professional differences in pathologists’ opinions about whether the diagnostic criteria for a specific diagnosis were met, most frequently in cases of atypia. Diagnostic coding/study methodology-related root causes were primarily miscategorizations of descriptive text diagnoses, which led to the development of a standardized electronic diagnostic form (BPATH-Dx). Specimen-related root causes included artefacts, limited diagnostic material, and poor slide quality. After re-review and discussion, a consensus diagnosis could be assigned in all cases. Conclusions Diagnostic variability is related to multiple factors, but consensus conferences, standardized electronic reporting formats and comments on suboptimal specimen quality can be used to reduce diagnostic variability. PMID:24511905

Research Challenges in Managing and Using Service Level Agreements

NASA Astrophysics Data System (ADS)

Rana, Omer; Ziegler, Wolfgang

A Service Level Agreement (SLA) represents an agreement between a service user and a provider in the context of a particular service provision. SLAs contain Quality of Service properties that must be maintained by a provider, and as agreed between a provider and a user/client. These are generally defined as a set of Service Level Objectives (SLOs). These properties need to be measurable and must be monitored during the provision of the service that has been agreed in the SLA. The SLA must also contain a set of penalty clauses specifying what happens when service providers fail to deliver the pre-agreed quality. Hence, an SLA may be used by both a user and a provider - from a user perspective, an SLA defines what is required - often defined using non-functional attributes of service provision. From a providers perspective, an SLA may be used to support capacity planning - especially if a provider is making it's capability available to multiple users. An SLA may be used by a client and provider to manage their behaviour over time - for instance, to optimise their long running revenue (cost) or QoS attributes (such as execution time), for instance. The lifecycle of an SLA is outlined, along with various uses of SLAs to support infrastructure management. A discussion about WS-Agreement - the emerging standard for specifying SLAs - is also provided.

Attributions and self-efficacy for physical activity in multiple sclerosis.

PubMed

Nickel, D; Spink, K; Andersen, M; Knox, K

2014-01-01

Self-efficacy is an important predictor of health-related physical activity in multiple sclerosis (MS). While past experiences are believed to influence efficacy beliefs, the explanations individuals provide for these experiences also may be critical. Our objective was to test the hypothesis that perceived success or failure to accumulate 150 min of physical activity in the previous week would moderate the relationship between the attributional dimension of stability and self-efficacy to exercise in the future. Forty-two adults with MS participated in this cross-sectional descriptive study. Participants completed questions assessing physical activity, perceived outcome for meeting the recommended level of endurance activity, attributions for the outcome, and exercise self-efficacy. Results from hierarchical multiple regression revealed a significant main effect for perceived outcome predicting self-efficacy that was qualified by a significant interaction. The final model, which included perceived outcome, stability, and the interaction term, predicted 37% of the variance in exercise self-efficacy, F (3, 38) = 7.27, p = .001. Our findings suggest that the best prediction of self-efficacy in the MS population may include the interaction of specific attributional dimensions with success/failure at meeting the recommended physical activity dose. Attributions may be another target for interventions aimed at increasing the physical activity in MS.

Water quality of a coastal lagoon (ES, Brazil): abiotic aspects, cytogenetic damage, and phytoplankton dynamics.

PubMed

Duarte, Ian Drumond; Silva, Nayara Heloisa Vieira Fraga; da Costa Souza, Iara; de Oliveira, Larissa Bassani; Rocha, Lívia Dorsch; Morozesk, Mariana; Bonomo, Marina Marques; de Almeida Pereira, Thaís; Dias, Mauro Cesar; de Oliveira Fernandes, Valéria; Matsumoto, Silvia Tamie

2017-04-01

Assessment of water resources requires interdisciplinary studies that include multiple ecosystem aspects. This study evaluated the water quality of Juara Lagoon (ES, Brazil) based on physical and chemical variables, cytogenetic responses in Allium cepa and phytoplankton dynamics. Three sampling sites were defined and water samples were collected during two sampling periods. Analyses such as determination of photic zone, conductivity, and concentrations of nutrients and metals were conducted as well as cytotoxic, mutagenic, and genotoxic potentials using A. cepa test. The main attributes of phytoplankton community, such as total richness, total density, density by class, dominance, and diversity, were also evaluated. Results have revealed that Juara Lagoon has signs of artificial eutrophication at two sampling sites due to high levels of total phosphorus and ammonia nitrogen. Cytotoxic, genotoxic, and mutagenic potentials were detected as well as high concentrations of Fe and Mn. Furthermore, 165 phytoplankton taxa were recorded, with highest richness in Chlorophyceae and Cyanophyceae classes. In addition, Cyanophyceae presented as the highest density class. A. cepa test and phytoplankton community evaluation indicated that the ecological quality of Juara Lagoon is compromised.

Evaluation of the effect of salts on chemical, structural, textural, sensory and heating properties of cheese: Contribution of conventional methods and spectral ones.

PubMed

Loudiyi, M; Aït-Kaddour, A

2018-03-21

Chemical composition, sensory characteristics, textural and functional properties are among the most important characteristics, which directly relates to the global quality of cheese and to consumer acceptability. A number of factors including milk composition, processing conditions and salt content, influences these properties. The past decades many investigations were performed on the possibilities to reduce salt content of cheese due to its adverse health effects, the current lifestyle and the awareness of the consumers for nutrition quality products. Due to the multiple potential effects of reducing NaCl (simple reduction or substitution) on cheese attributes, it is of utmost importance to identify and understand those effects in order to control the global quality and safety of the final product. In the present review a collection of the different results and conclusions drawn after studying the effect of salts by conventional (e.g. wet chemistry) and instrumental (e.g. spectral) methods on chemical, structural, textural, sensory and heating properties of cheese are presented.

Living Profiles: design of a health media platform for teens with special healthcare needs.

PubMed

Chira, Peter; Nugent, Lisa; Miller, Kimberly; Park, Tina; Donahue, Sean; Soni, Amit; Nugent, Diane; Sandborg, Christy

2010-10-01

Living Profiles is a health media platform in development that aggregates multiple data flows to help teens with special healthcare needs (SHCN), particularly with regard to self-management and independence. A teen-oriented personal health record (PHR) incorporates typical teen behaviors and attitudes about health and wellness, encompasses how teens perceive and convey quality of life, and aligns with data related to their chronic medical condition. We have conceived a secure personalized user interface called the Quality of Life Timeline, which will assist with the transition from pediatric care to an adult provider through modules that include a mood meter, reminder device, and teleport medicine. With this personalized PHR, teens with SHCN can better understand their condition and its effects on daily activities and life goals and vice versa; additionally, use of this PHR allows for better information sharing and communication between providers and patients. The use of a teen-oriented tool such as Living Profiles can impact teens' overall quality of life and disease self-management, important attributes for a successful transition program. Copyright © 2010 Elsevier Inc. All rights reserved.

Application of Visual Attention in Seismic Attribute Analysis

NASA Astrophysics Data System (ADS)

He, M.; Gu, H.; Wang, F.

2016-12-01

It has been proved that seismic attributes can be used to predict reservoir. The joint of multi-attribute and geological statistics, data mining, artificial intelligence, further promote the development of the seismic attribute analysis. However, the existing methods tend to have multiple solutions and insufficient generalization ability, which is mainly due to the complex relationship between seismic data and geological information, and undoubtedly own partly to the methods applied. Visual attention is a mechanism model of the human visual system which can concentrate on a few significant visual objects rapidly, even in a mixed scene. Actually, the model qualify good ability of target detection and recognition. In our study, the targets to be predicted are treated as visual objects, and an object representation based on well data is made in the attribute dimensions. Then in the same attribute space, the representation is served as a criterion to search the potential targets outside the wells. This method need not predict properties by building up a complicated relation between attributes and reservoir properties, but with reference to the standard determined before. So it has pretty good generalization ability, and the problem of multiple solutions can be weakened by defining the threshold of similarity.

Where Would You Go for Your Next Hospitalization?

PubMed Central

Jung, Kyoungrae; Feldman, Roger; Scanlon, Dennis

2014-01-01

We examine the effects of diverse dimensions of hospital quality – including consumers’ perceptions of unobserved attributes – on future hospital choice. We utilize consumers’ stated preference weights to obtain hospital-specific estimates of perceptions about unmeasured attributes such as reputation. We report three findings. First, consumers’ perceptions of reputation and medical services contribute substantially to utility for a hospital choice. Second, consumers tend to select hospitals with high clinical quality scores even before the scores are publicized. However, the effect of clinical quality on hospital choice is relatively small. Third, satisfaction with a prior hospital admission has a large impact on future hospital choice. Our findings suggest that including measures of consumers’ experience in report cards may increase their responsiveness to publicized information, but other strategies are needed to overcome the large effects of consumers’ beliefs about other quality attributes. PMID:21665300

Global mortality attributable to aircraft cruise emissions.

PubMed

Barrett, Steven R H; Britter, Rex E; Waitz, Ian A

2010-10-01

Aircraft emissions impact human health though degradation of air quality. The majority of previous analyses of air quality impacts from aviation have considered only landing and takeoff emissions. We show that aircraft cruise emissions impact human health over a hemispheric scale and provide the first estimate of premature mortalities attributable to aircraft emissions globally. We estimate ∼8000 premature mortalities per year are attributable to aircraft cruise emissions. This represents ∼80% of the total impact of aviation (where the total includes the effects of landing and takeoff emissions), and ∼1% of air quality-related premature mortalities from all sources. However, we note that the impact of landing and takeoff emissions is likely to be under-resolved. Secondary H(2)SO(4)-HNO(3)-NH(3) aerosols are found to dominate mortality impacts. Due to the altitude and region of the atmosphere at which aircraft emissions are deposited, the extent of transboundary air pollution is particularly strong. For example, we describe how strong zonal westerly winds aloft, the mean meridional circulation around 30-60°N, interaction of aircraft-attributable aerosol precursors with background ammonia, and high population densities in combination give rise to an estimated ∼3500 premature mortalities per year in China and India combined, despite their relatively small current share of aircraft emissions. Subsidence of aviation-attributable aerosol and aerosol precursors occurs predominantly around the dry subtropical ridge, which results in reduced wet removal of aviation-attributable aerosol. It is also found that aircraft NO(x) emissions serve to increase oxidation of nonaviation SO(2), thereby further increasing the air quality impacts of aviation. We recommend that cruise emissions be explicitly considered in the development of policies, technologies and operational procedures designed to mitigate the air quality impacts of air transportation.

How the quality and processing attributes of commercial sweet sorghum hybrids and cultivar compare for biorefining

USDA-ARS?s Scientific Manuscript database

Quality and processing attributes of sweet sorghum (Sorghum bicolor L. Moench) biomass are critical to the development of a large-scale industry for the manufacture of bioproducts. Two commercial sweet sorghum hybrids 105 and 106, later and earlier maturing, respectively, were compared to inbred, l...

The Incorporation of Quality Attributes into Online Course Design in Higher Education

ERIC Educational Resources Information Center

Lenert, Kathleen Anne; Diane P. Janes

2017-01-01

A survey was designed incorporating questions on 28 attributes (compiled through a literature review) and considered to be quality features in online academic courses in higher education. This study sought to investigate the ongoing practice of instructional designers and instructors in the United States with respect to their incorporation of…

Hydrodynamic pressure processing: Impact on the quality attributes of fresh and further-processed meat products

USDA-ARS?s Scientific Manuscript database

This book chapter reviews hydrodynamic pressure processing (HDP) as an innovative, postharvest technology for enhancing the quality attributes of fresh and further-processed meat products. A variety of meat products have been tested for their response to the high pressure shockwaves of HDP. The st...

Evaluation of Communication about Groups: The Hydra Phenomenon.

ERIC Educational Resources Information Center

Desmond, Roger Jon; Bezzini, John

A study investigated how the attribution of a problem solution to an individual or group affects the consumer's perception of the solution's quality. Based on the tendency to support group decision-making (Hydra phenomenon) it was predicted that decisions attributed to groups would be perceived as higher in quality than those made by individuals,…

Reliability and Validity of a Measure of Preschool Teachers' Attributions for Disruptive Behavior

ERIC Educational Resources Information Center

Carter, Lauren M.; Williford, Amanda P.; LoCasale-Crouch, Jennifer

2014-01-01

Research Findings: This study examined the quality of teacher attributions for child disruptive behavior using a new measure, the Preschool Teaching Attributions measure. A sample of 153 early childhood teachers and 432 children participated. All teachers completed the behavior attributions measure, as well as measures regarding demographics,…

Temperature affects long-term productivity and quality attributes of day-neutral strawberry for a space life-support system

NASA Astrophysics Data System (ADS)

Massa, Gioia D.; Chase, Elaine; Santini, Judith B.; Mitchell, Cary A.

2015-04-01

Strawberry (Fragaria x ananassa L.) is a promising candidate crop for space life-support systems with desirable sensory quality and health attributes. Day-neutral cultivars such as 'Seascape' are adaptable to a range of photoperiods, including short days that would save considerable energy for crop lighting without reductions in productivity or yield. Since photoperiod and temperature interact to affect strawberry growth and development, several diurnal temperature regimes were tested under a short photoperiod of 10 h per day for effects on yield and quality attributes of 'Seascape' strawberry during production cycles longer than 270 days. The coolest day/night temperature regime, 16°/8 °C, tended to produce smaller numbers of larger fruit than did the intermediate temperature range of 18°/10 °C or the warmest regime, 20°/12 °C, both of which produced similar larger numbers of smaller fruit. The intermediate temperature regime produced the highest total fresh mass of berries over an entire production cycle. Independent experiments examined either organoleptic or physicochemical quality attributes. Organoleptic evaluation indicated that fruit grown under the coolest temperature regime tended to score the highest for both hedonic preference and descriptive evaluation of sensory attributes related to sweetness, texture, aftertaste, and overall approval. The physicochemical quality attributes Brix, pH, and sugar/acid ratio were highest for fruits harvested from the coolest temperature regime and lower for those from the warmer temperature regimes. The cool-regime fruits also were lowest in titratable acidity. The yield parameters fruit number and size oscillated over the course of a production cycle, with a gradual decline in fruit size under all three temperature regimes. Brix and titratable acidity both decreased over time for all three temperature treatments, but sugar/acid ratio remained highest for the cool temperature regime over the entire production period. Periodic rejuvenation or replacement of strawberry propagules may be needed to maintain both quality and quantity of strawberry yield in space.

Methodology to Estimate the Longitudinal Average Attributable Fraction of Guideline-recommended Medications for Death in Older Adults With Multiple Chronic Conditions

PubMed Central

Zhan, Yilei; Cohen, Andrew B.; Tinetti, Mary E.; Trentalange, Mark; McAvay, Gail

2016-01-01

Background: Persons with multiple chronic conditions receive multiple guideline-recommended medications to improve outcomes such as mortality. Our objective was to estimate the longitudinal average attributable fraction for 3-year survival of medications for cardiovascular conditions in persons with multiple chronic conditions and to determine whether heterogeneity occurred by age. Methods: Medicare Current Beneficiary Survey participants (N = 8,578) with two or more chronic conditions, enrolled from 2005 to 2009 with follow-up through 2011, were analyzed. We calculated the longitudinal extension of the average attributable fraction for oral medications (beta blockers, renin–angiotensin system blockers, and thiazide diuretics) indicated for cardiovascular conditions (atrial fibrillation, coronary artery disease, heart failure, and hypertension), on survival adjusted for 18 participant characteristics. Models stratified by age (≤80 and >80 years) were analyzed to determine heterogeneity of both cardiovascular conditions and medications. Results: Heart failure had the greatest average attributable fraction (39%) for mortality. The fractional contributions of beta blockers, renin–angiotensin system blockers, and thiazides to improve survival were 10.4%, 9.3%, and 7.2% respectively. In age-stratified models, of these medications thiazides had a significant contribution to survival only for those aged 80 years or younger. The effects of the remaining medications were similar in both age strata. Conclusions: Most cardiovascular medications were attributed independently to survival. The two cardiovascular conditions contributing independently to death were heart failure and atrial fibrillation. The medication effects were similar by age except for thiazides that had a significant contribution to survival in persons younger than 80 years. PMID:26748093

Research on efficiency evaluation model of integrated energy system based on hybrid multi-attribute decision-making.

PubMed

Li, Yan

2017-05-25

The efficiency evaluation model of integrated energy system, involving many influencing factors, and the attribute values are heterogeneous and non-deterministic, usually cannot give specific numerical or accurate probability distribution characteristics, making the final evaluation result deviation. According to the characteristics of the integrated energy system, a hybrid multi-attribute decision-making model is constructed. The evaluation model considers the decision maker's risk preference. In the evaluation of the efficiency of the integrated energy system, the evaluation value of some evaluation indexes is linguistic value, or the evaluation value of the evaluation experts is not consistent. These reasons lead to ambiguity in the decision information, usually in the form of uncertain linguistic values and numerical interval values. In this paper, the risk preference of decision maker is considered when constructing the evaluation model. Interval-valued multiple-attribute decision-making method and fuzzy linguistic multiple-attribute decision-making model are proposed. Finally, the mathematical model of efficiency evaluation of integrated energy system is constructed.

Modernization of software quality assurance

NASA Technical Reports Server (NTRS)

Bhaumik, Gokul

1988-01-01

The customers satisfaction depends not only on functional performance, it also depends on the quality characteristics of the software products. An examination of this quality aspect of software products will provide a clear, well defined framework for quality assurance functions, which improve the life-cycle activities of software development. Software developers must be aware of the following aspects which have been expressed by many quality experts: quality cannot be added on; the level of quality built into a program is a function of the quality attributes employed during the development process; and finally, quality must be managed. These concepts have guided our development of the following definition for a Software Quality Assurance function: Software Quality Assurance is a formal, planned approach of actions designed to evaluate the degree of an identifiable set of quality attributes present in all software systems and their products. This paper is an explanation of how this definition was developed and how it is used.

A Fine-Grained API Link Prediction Approach Supporting CMDA Mashup Recommendation

NASA Astrophysics Data System (ADS)

Zhang, J.; Bao, Q.; Lee, T. J.; Ramachandran, R.; Lee, S.; Pan, L.; Gatlin, P. N.; Maskey, M.

2017-12-01

Service (API) discovery and recommendation is key to the wide spread of service oriented architecture and service oriented software engineering. Service recommendation typically relies on service linkage prediction calculated by the semantic distances (or similarities) among services based on their collection of inherent attributes. Given a specific context (mashup goal), however, different attributes may contribute differently to a service linkage. In this work, instead of training a model for all attributes as a whole, a novel approach is presented to simultaneously train separate models for individual attributes. Our contributions are summarized in three-fold. First is that we have developed a scalable attribute-level data model, featuring scalability and extensibility. We have extended Multiplicative Attribute Graph (MAG) model to represent node profiles featuring rich categorical attributes, while relaxing its constraint of requiring a priori knowledge of predefined attributes. LDA is leveraged to dynamically identify attributes based on attribute modeling, and multiple Gaussian fit is applied to find global optimal values. The second contribution is that we have seamlessly integrated the latent relationships between API attributes as well as observed network structure based on historical API usage data. Such a layered information model enables us to predict the probability of a link between two APIs based on their attribute link affinities carrying a variety of information including meta data, semantic data, historical usage data, as well as crowdsourcing user comments and annotations. The third contribution is that we have developed a finegrained context-aware mashup-API recommendation technique. On top of individual models trained for separate attributes, a dedicated layer is trained to represent the latent attribute distribution regarding mashup purpose, i.e., sensitivity of attributes to context. Thus, given the description of an intended mashup, the attributes sensitive to the goal will be identified, and corresponding attribute models will be exploited to compute the possibility of API linkages under the context. Such a layered model increases search accuracy.

Probiotic supplementation and fast freezing to improve quality attributes and oxidation stability of frozen chicken breast muscle

USDA-ARS?s Scientific Manuscript database

The objective of this study was to determine the effects of probiotic supplementation and fast freezing on quality attributes and oxidation stability of frozen/thawed chicken breast meat. Broilers were fed with a basal diet or the basal diet plus 250 ppm Sporulin (three strains of Bacillus subtilis)...

Comparison of optimal wavelengths selection methods for visible/near-infrared prediction of apple firmness and soluble solids content

USDA-ARS?s Scientific Manuscript database

Visible and near-infrared (Vis-NIR) spectroscopy is now being used for nondestructive quality measurement of fruits and other food products. To implement the technology, it is necessary to develop an effective calibration model relating the acquired spectral data to the quality attribute(s) of inter...

Song and Male Quality in Prairie Warblers

Treesearch

Bruce E. Byers; Michael E. Akresh; David I. King; W. Koenig

2016-01-01

To determine if the songs of male prairie warblers could potentially reveal to female listeners information about the quality of singers, we compared various aspects of prairie warbler song structure and performance to attributes that might reflect a male singer's potential to enhance the fitness of his mate. We found that all the tested male attributes—arrival...

Relating instrumental texture, determined relating instrumental texture, determined attachments, to sensory analysis of rainbow trout, Oncorhynchus mykiss, fillets

USDA-ARS?s Scientific Manuscript database

Texture is one of the most important quality attributes of fish fillets, and accurate assessment of variation in this attribute, as affected by storage and handling, is critical in providing consistent quality product. Trout fillets received 4 treatments: 3-d refrigeration (R3), 7-d refrigeration (R...

Quality Management: An "Essential Attributes" Approach. A Case Study towards a Sustainable Model of Course Effectiveness Evaluation

ERIC Educational Resources Information Center

Murphy, Francis S.

2005-01-01

Education of potential professional engineers should take account of the type of employment that they will eventually obtain. The quality of an engineering degree course can be judged by assessing whether the correct balance of "essential attributes" has been effectively obtained. This case study is concerned with assessing the balance…

Nearest neighbor imputation of species-level, plot-scale forest structure attributes from LiDAR data

Treesearch

Andrew T. Hudak; Nicholas L. Crookston; Jeffrey S. Evans; David E. Hall; Michael J. Falkowski

2008-01-01

Meaningful relationships between forest structure attributes measured in representative field plots on the ground and remotely sensed data measured comprehensively across the same forested landscape facilitate the production of maps of forest attributes such as basal area (BA) and tree density (TD). Because imputation methods can efficiently predict multiple response...

Emerging markets for imported beef in China: Results from a consumer choice experiment in Beijing.

PubMed

Ortega, David L; Hong, Soo Jeong; Wang, H Holly; Wu, Laping

2016-11-01

The purpose of this study is to explore emerging markets for imported beef in China by assessing Beijing consumer demand for quality attributes. This study utilizes data from an in-store choice experiment to evaluate consumer willingness-to-pay for select food quality attributes (food safety, animal welfare, Green Food and Organic certification) taking into account country-of-origin information. Our results show that Beijing consumers value food safety information the most, and are willing to pay more for Australian beef products than for US or domestic (Chinese) beef. We explore the various relationships between the quality attributes, find evidence of preference heterogeneity and discuss agribusiness and marketing implications of our findings. Copyright © 2016 Elsevier Ltd. All rights reserved.

Exploratory sensory profiling of three culinary preparations of potatoes (Solanum tuberosum L.).

PubMed

Seefeldt, Helene F; Tønning, Erik; Thybo, Anette K

2011-01-15

A consumer-oriented description of potato quality with regard to culinary preparation could increase potato consumption. The aim of this study was to investigate the sensory attributes in 11 potato varieties grown at two locations and used for three culinary preparations. Sensory evaluation of the potatoes served either as boiled, oven-fried or mashed were performed using 15-19 descriptors for appearance, flavour and texture attributes. A principal component analysis revealed that 45% of the variation in the sensory data was related to variety differences, which was ascribed to variation in appearance, dry matter content and texture. Growing location also significantly affected appearance and texture. The sensory panel judged the sensory attributes 'yellowness', 'hardness', 'adhesiveness' and 'moistness' to be important quality descriptors in all three culinary preparations. Internal references showed the high reproducibility of the sensory evaluations. The potatoes grown in a sandy location had higher content of dry matter compared to those grown in a clay location, affecting the quality. This study showed that it was possible to do reliable and reproducible sensory profiles in a potato material with a large span in quality. Sensory information based on few attributes can be used to describe culinary quality of potato varieties. Copyright © 2010 Society of Chemical Industry.

Designing energy dissipation properties via thermal spray coatings

DOE PAGES

Brake, Matthew R. W.; Hall, Aaron Christopher; Madison, Jonathan D.

2016-12-14

The coefficient of restitution is a measure of energy dissipation in a system across impact events. Often, the dissipative qualities of a pair of impacting components are neglected during the design phase. This research looks at the effect of applying a thin layer of metallic coating, using thermal spray technologies, to significantly alter the dissipative properties of a system. We studied the dissipative properties across multiple impacts in order to assess the effects of work hardening, the change in microstructure, and the change in surface topography. The results of the experiments indicate that any work hardening-like effects are likely attributablemore » to the crushing of asperities, and the permanent changes in the dissipative properties of the system, as measured by the coefficient of restitution, are attributable to the microstructure formed by the thermal spray coating. Furthermore, the microstructure appears to be robust across impact events of moderate energy levels, exhibiting negligible changes across multiple impact events.« less

Data Sharing For Precision Medicine: Policy Lessons And Future Directions.

PubMed

Blasimme, Alessandro; Fadda, Marta; Schneider, Manuel; Vayena, Effy

2018-05-01

Data sharing is a precondition of precision medicine. Numerous organizations have produced abundant guidance on data sharing. Despite such efforts, data are not being shared to a degree that can trigger the expected data-driven revolution in precision medicine. We set out to explore why. Here we report the results of a comprehensive analysis of data-sharing guidelines issued over the past two decades by multiple organizations. We found that the guidelines overlap on a restricted set of policy themes. However, we observed substantial fragmentation in the policy landscape across specific organizations and data types. This may have contributed to the current stalemate in data sharing. To move toward a more efficient data-sharing ecosystem for precision medicine, policy makers should explore innovative ways to cope with central policy themes such as privacy, consent, and data quality; focus guidance on interoperability, attribution, and public engagement; and promote data-sharing policies that can be adapted to multiple data types.

Designing energy dissipation properties via thermal spray coatings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brake, Matthew R. W.; Hall, Aaron Christopher; Madison, Jonathan D.

The coefficient of restitution is a measure of energy dissipation in a system across impact events. Often, the dissipative qualities of a pair of impacting components are neglected during the design phase. This research looks at the effect of applying a thin layer of metallic coating, using thermal spray technologies, to significantly alter the dissipative properties of a system. We studied the dissipative properties across multiple impacts in order to assess the effects of work hardening, the change in microstructure, and the change in surface topography. The results of the experiments indicate that any work hardening-like effects are likely attributablemore » to the crushing of asperities, and the permanent changes in the dissipative properties of the system, as measured by the coefficient of restitution, are attributable to the microstructure formed by the thermal spray coating. Furthermore, the microstructure appears to be robust across impact events of moderate energy levels, exhibiting negligible changes across multiple impact events.« less

Multiple myeloma: Diagnosis and management issues in patients with pre-existing chronic kidney disease.

PubMed

Vadlamudi, Srilatha; Annapareddy, Siva Nagendra Reddy

2016-01-01

Multiple myeloma is one of the most common malignancies encountered in clinical practice. Renal involvement in myeloma is a well-recognized entity. Although rare, another special situation that a nephrologist can encounter is myeloma occurring in a patient with preexisting chronic kidney disease (CKD) due to other etiologies. Anemia, bone pains and hypercalcemia, which commonly indicate the diagnosis of myeloma in the general population, are not useful in the presence of CKD. The sensitivity and specificity of serum free light chain assay is decreased in the presence of renal failure. Chemotherapy-related adverse effects are high compared with that in patients without CKD; this is attributed to the decreased clearance of drugs and the additive effect of chemotherapy-related adverse effects to the complications of CKD. Autologous and allogenic bone marrow transplantation can be attempted in this group of patients with non-myeloablative-conditioning regimens. Combined bone marrow and renal transplantation remains a viable option in this group of patients to increase life expectancy and quality of life.

Nondestructive detection of pork comprehensive quality based on spectroscopy and support vector machine

NASA Astrophysics Data System (ADS)

Liu, Yuanyuan; Peng, Yankun; Zhang, Leilei; Dhakal, Sagar; Wang, Caiping

2014-05-01

Pork is one of the highly consumed meat item in the world. With growing improvement of living standard, concerned stakeholders including consumers and regulatory body pay more attention to comprehensive quality of fresh pork. Different analytical-laboratory based technologies exist to determine quality attributes of pork. However, none of the technologies are able to meet industrial desire of rapid and non-destructive technological development. Current study used optical instrument as a rapid and non-destructive tool to classify 24 h-aged pork longissimus dorsi samples into three kinds of meat (PSE, Normal and DFD), on the basis of color L* and pH24. Total of 66 samples were used in the experiment. Optical system based on Vis/NIR spectral acquisition system (300-1100 nm) was self- developed in laboratory to acquire spectral signal of pork samples. Median smoothing filter (M-filter) and multiplication scatter correction (MSC) was used to remove spectral noise and signal drift. Support vector machine (SVM) prediction model was developed to classify the samples based on their comprehensive qualities. The results showed that the classification model is highly correlated with the actual quality parameters with classification accuracy more than 85%. The system developed in this study being simple and easy to use, results being promising, the system can be used in meat processing industry for real time, non-destructive and rapid detection of pork qualities in future.

Assessment of air quality in Haora River basin using fuzzy multiple-attribute decision making techniques.

PubMed

Singh, Ajit Pratap; Chakrabarti, Sumanta; Kumar, Sumit; Singh, Anjaney

2017-08-01

This paper deals with assessment of air quality in Haora River basin using two techniques. Initially, air quality indices were evaluated using a modified EPA method. The indices were also evaluated using a fuzzy comprehensive assessment (FCA) method. The results obtained from the fuzzy comprehensive assessment method were compared to that obtained from the modified EPA method. To illustrate the applicability of the methodology proposed herein, a case study has been presented. Air samples have been collected at 10 sampling sites located along Haora River. Six important air pollutants, namely, carbon monoxide, sulfur dioxide, nitrogen dioxide, suspended particulate matter (SPM), PM 10 , and lead, were monitored continuously, and air quality maps were generated on the GIS platform. Comparison of the methodologies has clearly highlighted superiority and robustness of the fuzzy comprehensive assessment method in determining air quality indices under study. It has effectively addressed the inherent uncertainties involved in the evaluation, modeling, and interpretation of sampling data, which was beyond the scope of the traditional weighted approaches employed otherwise. The FCA method is robust and prepares a credible platform of air quality evaluation and identification, in face of the uncertainties that remain eclipsed in the traditional approaches like the modified EPA method. The insights gained through the present study are believed to be of pivotal significance in guiding the development and implementation of effective environmental remedial action plans in the study area.

Valuing river characteristics using combined site choice and participation travel cost models.

PubMed

Johnstone, C; Markandya, A

2006-08-01

This paper presents new welfare measures for marginal changes in river quality in selected English rivers. The river quality indicators used include chemical, biological and habitat-level attributes. Economic values for recreational use of three types of river-upland, lowland and chalk-are presented. A survey of anglers was carried out and using these data, two travel cost models were estimated, one to predict the numbers of trips and the other to predict angling site choice. These models were then linked to estimate the welfare associated with marginal changes in river quality using the participation levels as estimated in the trip prediction model. The model results showed that higher flow rates, biological quality and nutrient pollution levels affect site choice and influence the likelihood of a fishing trip. Consumer surplus values per trip for a 10% change in river attributes range from pound 0.04 to pound 3.93 ( pound 2001) depending on the attribute.

Quality Attribute Techniques Framework

NASA Astrophysics Data System (ADS)

Chiam, Yin Kia; Zhu, Liming; Staples, Mark

The quality of software is achieved during its development. Development teams use various techniques to investigate, evaluate and control potential quality problems in their systems. These “Quality Attribute Techniques” target specific product qualities such as safety or security. This paper proposes a framework to capture important characteristics of these techniques. The framework is intended to support process tailoring, by facilitating the selection of techniques for inclusion into process models that target specific product qualities. We use risk management as a theory to accommodate techniques for many product qualities and lifecycle phases. Safety techniques have motivated the framework, and safety and performance techniques have been used to evaluate the framework. The evaluation demonstrates the ability of quality risk management to cover the development lifecycle and to accommodate two different product qualities. We identify advantages and limitations of the framework, and discuss future research on the framework.

Taking the pulse of Internet pharmacies.

PubMed

Yang, Z; Peterson, R T; Huang, L

2001-01-01

Like most businesses, online pharmacy companies will only be successful if they make sure customers are satisfied with the service they receive. But what attributes of service quality lead to satisfaction and dissatisfaction? This study identified 19 Internet pharmacy service quality dimensions in three categories: (1) product cost and availability, (2) customer service, and (3) the online information system. Our analysis uncovered attributes that tend to determine consumer satisfaction and points out ways to improve overall service quality in the Internet pharmacy arena.

A software quality model and metrics for risk assessment

NASA Technical Reports Server (NTRS)

Hyatt, L.; Rosenberg, L.

1996-01-01

A software quality model and its associated attributes are defined and used as the model for the basis for a discussion on risk. Specific quality goals and attributes are selected based on their importance to a software development project and their ability to be quantified. Risks that can be determined by the model's metrics are identified. A core set of metrics relating to the software development process and its products is defined. Measurements for each metric and their usability and applicability are discussed.

Intersections of discrimination due to unemployment and mental health problems: the role of double stigma for job- and help-seeking behaviors.

PubMed

Staiger, Tobias; Waldmann, Tamara; Oexle, Nathalie; Wigand, Moritz; Rüsch, Nicolas

2018-05-21

The everyday lives of unemployed people with mental health problems can be affected by multiple discrimination, but studies about double stigma-an overlap of identities and experiences of discrimination-in this group are lacking. We therefore studied multiple discrimination among unemployed people with mental health problems and its consequences for job- and help-seeking behaviors. Everyday discrimination and attributions of discrimination to unemployment and/or to mental health problems were examined among 301 unemployed individuals with mental health problems. Job search self-efficacy, barriers to care, and perceived need for treatment were compared among four subgroups, depending on attributions of experienced discrimination to unemployment and to mental health problems (group i); neither to unemployment nor to mental health problems (group ii); mainly to unemployment (group iii); or mainly to mental health problems (group iv). In multiple regressions among all participants, higher levels of discrimination predicted reduced job search self-efficacy and higher barriers to care; and attributions of discrimination to unemployment were associated with increased barriers to care. In ANOVAs for subgroup comparisons, group i participants, who attributed discrimination to both unemployment and mental health problems, reported lower job search self-efficacy, more perceived stigma-related barriers to care and more need for treatment than group iii participants, as well as more stigma-related barriers to care than group iv. Multiple discrimination may affect job search and help-seeking among unemployed individuals with mental health problems. Interventions to reduce public stigma and to improve coping with multiple discrimination for this group should be developed.

Users' demographic profile and quality attributes of bus services: The perspectives of users, operators and local authorities

NASA Astrophysics Data System (ADS)

Noh, Nur'Amirah Mhd.; Hamid, Ahmad Hilmy Abd

2017-10-01

Bus services that can help meet almost every bus user's needs are the goals of bus operators. Despite such an idealistic view, the operators themselves, users and even the local authorities have been found to hold different views about the quality of service that the bus should deliver. As the users i.e., customers are considered as important stakeholders, understanding their characteristics, profile and pattern is very crucial. To this end, the present study has attempted to gauge the perspectives of all the above-mentioned stakeholders. For the users, a customer satisfaction survey was employed to look into the relative influence of service attributes. In addition, surveys were also administered to bus operators and local authorities to study their perspectives in relation to this matter. 450 randomly selected respondents were surveyed. Identification of the service level was analyzed through the Likert scale whereas the perspectives of the operators and authorities were dealt with through mean value Analysis. Specifically, this study aims to identify the crucial attributes in determining the quality of the bus services. Findings of the study indicated that different attributes were selected by users, operators and authorities, which clearly enlightened the variations of the important attributes in determining the level of bus service quality. In its attempt to compare the service level attributes from three perspectives, this study has helped advance better improvement and strategies for the urban public bus operators and planners, in addition to the authorities in delivering user-friendly bus services by taking into account the local context, user profile and demographic characteristics.

Estimation of effective dose and lifetime attributable risk from multiple head CT scans in ventriculoperitoneal shunted children.

PubMed

Aw-Zoretic, J; Seth, D; Katzman, G; Sammet, S

2014-10-01

The purpose of this review is to determine the averaged effective dose and lifetime attributable risk factor from multiple head computed tomography (CT) dose data on children with ventriculoperitoneal shunts (VPS). A total of 422 paediatric head CT exams were found between October 2008 and January 2011 and retrospectively reviewed. The CT dose data was weighted with the latest IRCP 103 conversion factor to obtain the effective dose per study and the averaged effective dose was calculated. Estimates of the lifetime attributable risk were also calculated from the averaged effective dose using a conversion factor from the latest BEIR VII report. Our study found the highest effective doses in neonates and the lowest effective doses were observed in the 10-18 years age group. We estimated a 0.007% potential increase risk in neonates and 0.001% potential increased risk in teenagers over the base risk. Multiple head CTs in children equates to a slight potential increase risk in lifetime attributable risk over the baseline risk for cancer, slightly higher in neonates relative to teenagers. The potential risks versus clinical benefit must be assessed. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Estimation of a Preference-Based Summary Score for the Patient-Reported Outcomes Measurement Information System: The PROMIS®-Preference (PROPr) Scoring System.

PubMed

Dewitt, Barry; Feeny, David; Fischhoff, Baruch; Cella, David; Hays, Ron D; Hess, Rachel; Pilkonis, Paul A; Revicki, Dennis A; Roberts, Mark S; Tsevat, Joel; Yu, Lan; Hanmer, Janel

2018-06-01

Health-related quality of life (HRQL) preference-based scores are used to assess the health of populations and patients and for cost-effectiveness analyses. The National Institutes of Health Patient-Reported Outcomes Measurement Information System (PROMIS ® ) consists of patient-reported outcome measures developed using item response theory. PROMIS is in need of a direct preference-based scoring system for assigning values to health states. To produce societal preference-based scores for 7 PROMIS domains: Cognitive Function-Abilities, Depression, Fatigue, Pain Interference, Physical Function, Sleep Disturbance, and Ability to Participate in Social Roles and Activities. Online survey of a US nationally representative sample ( n = 983). Preferences for PROMIS health states were elicited with the standard gamble to obtain both single-attribute scoring functions for each of the 7 PROMIS domains and a multiplicative multiattribute utility (scoring) function. The 7 single-attribute scoring functions were fit using isotonic regression with linear interpolation. The multiplicative multiattribute summary function estimates utilities for PROMIS multiattribute health states on a scale where 0 is the utility of being dead and 1 the utility of "full health." The lowest possible score is -0.022 (for a state viewed as worse than dead), and the highest possible score is 1. The online survey systematically excludes some subgroups, such as the visually impaired and illiterate. A generic societal preference-based scoring system is now available for all studies using these 7 PROMIS health domains.

[Concept analysis of a participatory approach to occupational safety and health].

PubMed

Yoshikawa, Etsuko

2013-01-01

The purpose of this study was to analyze a participatory approach to occupational safety and health, and to examine the possibility of applying the concept to the practice and research of occupational safety and health. According to Rodger's method, descriptive data concerning antecedents, attributes and consequences were qualitatively analyzed. A total of 39 articles were selected for analysis. Attributes with a participatory approach were: "active involvement of both workers and employers", "focusing on action-oriented low-cost and multiple area improvements based on good practices", "the process of emphasis on consensus building", and "utilization of a local network". Antecedents of the participatory approach were classified as: "existing risks at the workplace", "difficulty of occupational safety and health activities", "characteristics of the workplace and workers", and "needs for the workplace". The derived consequences were: "promoting occupational safety and health activities", "emphasis of self-management", "creation of safety and healthy workplace", and "contributing to promotion of quality of life and productivity". A participatory approach in occupational safety and health is defined as, the process of emphasis on consensus building to promote occupational safety and health activities with emphasis on self-management, which focuses on action-oriented low-cost and multiple area improvements based on good practices with active involvement of both workers and employers through utilization of local networks. We recommend that the role of the occupational health professional be clarified and an evaluation framework be established for the participatory approach to promote occupational safety and health activities by involving both workers and employers.

The effect of cryogenic grinding and hammer milling on the flavour quality of ground pepper (Piper nigrum L.).

PubMed

Liu, Hong; Zeng, Fankui; Wang, Qinghuang; Ou, Shiyi; Tan, Lehe; Gu, Fenglin

2013-12-15

In this study, we compared the effects of cryogenic grinding and hammer milling on the flavour attributes of black, white, and green pepper. The flavour attributes were analysed using headspace solid-phase micro-extraction (HS-SPME) and gas chromatography-mass spectrometry (GC/MS), sensory evaluation and electronic nose (e-nose) analysis. Cryogenic grinding resulted in minimal damage to the colour, flavour, and sensory attributes of the spices. Cryogenic grinding was also better than hammer milling at preserving the main potent aroma constituents, but the concentrations of the main aroma constituents were dramatically reduced after storing the samples at 4 °C for 6 months. Pattern matching performed by the e-nose further supported our sensory and instrumental findings. Overall, cryogenic grinding was superior to hammer milling for preserving the sensory properties and flavour attributes of pepper without significantly affecting its quality. However, we found that the flavour quality of ground pepper was reduced during storage. Copyright © 2013 Elsevier Ltd. All rights reserved.

Particulate Matter and Ozone Prediction and Source Attribution for U.S. Air Quality Management in a Changing World

NASA Astrophysics Data System (ADS)

Sanyal, S.; Wuebbles, D. J.

2017-12-01

In this study, the focus is on how global changes in climate and emissions will affect the U.S. air quality, especially on fine particulate matter and ozone, projecting their future trends and quantifying key source attribution. We are conducting three primary experiments : (1) historical simulations for period 1994-2013 to establish the credibility of the system and refine process-level understanding of U.S. regional air quality; (2) projections for period 2041-2060 to quantify individual and combined impacts of global climate and emissions changes under multiple scenarios; (3) sensitivity analyses to determine future changes in pollution sources and their relative contributions from anthropogenic and natural emissions, long-range pollutant transport, and climate change effects. Here we will present the result from the first experiment with the global model CESM1.2 (with fully coupled chemistry using CAM-chem5) driven by NASA Modern-Era Retrospective analysis for Research and Applications (MERRA) reanalysis data at 0.9o x 1.25o resolution. We will present the comparison between the results from model simulation with observation data from EPA database. Since there is always a challenge in comparing gridded prediction from model data with point data from the observation databases, because the model simulations calculate the average outcome over a grid for a given set of conditions while the stochastic component (e.g. sub-grid variations) embedded in the observations are not accounted for, we are using extensive statistical measure to do the comparison. We will also determine relative contributions from multiscale (local, regional, global) processes, major source regions (Mexico, Canada, Asia, Africa) and types (natural, anthropogenic) and associated uncertainties (climate decadal oscillations/interannual variations, emissions and model structure errors).

Effect of node attributes on the temporal dynamics of network structure

NASA Astrophysics Data System (ADS)

Momeni, Naghmeh; Fotouhi, Babak

2017-03-01

Many natural and social networks evolve in time and their structures are dynamic. In most networks, nodes are heterogeneous, and their roles in the evolution of structure differ. This paper focuses on the role of individual attributes on the temporal dynamics of network structure. We focus on a basic model for growing networks that incorporates node attributes (which we call "quality"), and we focus on the problem of forecasting the structural properties of the network in arbitrary times for an arbitrary initial network. That is, we address the following question: If we are given a certain initial network with given arbitrary structure and known node attributes, then how does the structure change in time as new nodes with given distribution of attributes join the network? We solve the model analytically and obtain the quality-degree joint distribution and degree correlations. We characterize the role of individual attributes in the position of individual nodes in the hierarchy of connections. We confirm the theoretical findings with Monte Carlo simulations.

Validation of a two-dimensional liquid chromatography method for quality control testing of pharmaceutical materials.

PubMed

Yang, Samuel H; Wang, Jenny; Zhang, Kelly

2017-04-07

Despite the advantages of 2D-LC, there is currently little to no work in demonstrating the suitability of these 2D-LC methods for use in a quality control (QC) environment for good manufacturing practice (GMP) tests. This lack of information becomes more critical as the availability of commercial 2D-LC instrumentation has significantly increased, and more testing facilities begin to acquire these 2D-LC capabilities. It is increasingly important that the transferability of developed 2D-LC methods be assessed in terms of reproducibility, robustness and performance across different laboratories worldwide. The work presented here focuses on the evaluation of a heart-cutting 2D-LC method used for the analysis of a pharmaceutical material, where a key, co-eluting impurity in the first dimension ( 1 D) is resolved from the main peak and analyzed in the second dimension ( 2 D). A design-of-experiments (DOE) approach was taken in the collection of the data, and the results were then modeled in order to evaluate method robustness using statistical modeling software. This quality by design (QBD) approach gives a deeper understanding of the impact of these 2D-LC critical method attributes (CMAs) and how they affect overall method performance. Although there are multiple parameters that may be critical from method development point of view, a special focus of this work is devoted towards evaluation of unique 2D-LC critical method attributes from method validation perspective that transcend conventional method development and validation. The 2D-LC method attributes are evaluated for their recovery, peak shape, and resolution of the two co-eluting compounds in question on the 2 D. In the method, linearity, accuracy, precision, repeatability, and sensitivity are assessed along with day-to-day, analyst-to-analyst, and lab-to-lab (instrument-to-instrument) assessments. The results of this validation study demonstrate that the 2D-LC method is accurate, sensitive, and robust and is ultimately suitable for QC testing with good method transferability. Copyright © 2017 Elsevier B.V. All rights reserved.

Consumer preferences for food product quality attributes from Swedish agriculture.

PubMed

Carlsson, Fredrik; Frykblom, Peter; Lagerkvist, Carl Johan

2005-06-01

This paper employs a choice experiment to obtain consumer preferences and willingness to pay for food product quality attributes currently not available in Sweden. Data were obtained from a large mail survey and estimated with a random parameter logit model. We found evidence for intraproduct differences in consumer preferences for identical attributes, as well as interproduct discrepancies in ranking of attributes. Furthermore, we found evidence of a market failure relating to the potential use of genetically modified animal fodder. Finally, we found support for the idea that a cheap-talk script can alleviate problems of external validity of choice experiments. Our results are useful in forming product differentiation strategies within the food industry, as well as for the formation of food policy.

Quality assurance and reliability in the Japanese electronics industry

NASA Astrophysics Data System (ADS)

Pecht, Michael; Boulton, William R.

1995-02-01

Quality and reliability are two attributes required for all Japanese products, although the JTEC panel found these attributes to be secondary to customer cost requirements. While our Japanese hosts gave presentations on the challenges of technology, cost, and miniaturization, quality and reliability were infrequently the focus of our discussions. Quality and reliability were assumed to be sufficient to meet customer needs. Fujitsu's slogan, 'quality built-in, with cost and performance as prime consideration,' illustrates this point. Sony's definition of a next-generation product is 'one that is going to be half the size and half the price at the same performance of the existing one'. Quality and reliability are so integral to Japan's electronics industry that they need no new emphasis.

Quality assurance and reliability in the Japanese electronics industry

NASA Technical Reports Server (NTRS)

Pecht, Michael; Boulton, William R.

1995-01-01

Quality and reliability are two attributes required for all Japanese products, although the JTEC panel found these attributes to be secondary to customer cost requirements. While our Japanese hosts gave presentations on the challenges of technology, cost, and miniaturization, quality and reliability were infrequently the focus of our discussions. Quality and reliability were assumed to be sufficient to meet customer needs. Fujitsu's slogan, 'quality built-in, with cost and performance as prime consideration,' illustrates this point. Sony's definition of a next-generation product is 'one that is going to be half the size and half the price at the same performance of the existing one'. Quality and reliability are so integral to Japan's electronics industry that they need no new emphasis.

Work-Family Conflict within the Family: Crossover Effects, Perceived Parent-Child Interaction Quality, Parental Self-Efficacy, and Life Role Attributions

ERIC Educational Resources Information Center

Cinamon, Rachel Gali; Weisel, Amatzia; Tzuk, Kineret

2007-01-01

To better understand the work-family interface within the family domain, this study investigated crossover effects of two types of work-family conflict among 120 participants (60 married couples), these conflicts' relations with parental self-efficacy and perceived quality of parent-child interaction, and the contribution of attributions of…

Excitable toxin-antitoxin modules coordinated through intracellular bottlenecks

NASA Astrophysics Data System (ADS)

Mather, William

Chronic infections and pathogenic biofilms present a serious threat to the health of humans by decreasing life expectancy and quality. The resilience of these microbial communities has been attributed to the spontaneous formation of persister cells, which constitute a small fraction of the population capable of surviving a wide range of environmental stressors. Gating of bacterial persistence has recently been linked to toxin-antitoxin (TA) modules, which are operons with an evolutionarily conserved motif that includes a toxin that halts cell growth and a corresponding antitoxin that neutralizes the toxin. While many such modules have been identified and studied in a wide range of organisms, little consideration of the interactions between multiple modules within a single host has been made. Moreover, the multitude of different antitoxin species are degraded by a relatively small number of proteolytic pathways, strongly suggesting competition between antitoxins for degradation machinery, i.e. queueing coupling. Here we present a theoretical understanding of the dynamics of multiple TA modules that are coupled through either proteolytic queueing, a toxic effect on cell growth rate, or both. We conclude that indirect queueing coordination between multiple TA modules may be central to controlling bacterial persistence. NSF Award Number MCB-1330180.

A Longitudinal Examination of the Hopelessness Theory of Depression in People Who Have Multiple Sclerosis

PubMed Central

Kneebone, I. I.; Guerrier, S.; Dunmore, E.; Jones, E.; Fife-Schaw, C.

2015-01-01

Purpose. Hopelessness theory predicts that negative attributional style will interact with negative life events over time to predict depression. The intention of this study was to test this in a population who are at greater risk of negative life events, people with Multiple Sclerosis (MS). Method. Data, including measures of attributional style, negative life events, and depressive symptoms, were collected via postal survey in 3 phases, each one a year apart. Results. Responses were received from over 380 participants at each study phase. Negative attributional style was consistently able to predict future depressive symptoms at low to moderate levels of association; however, this ability was not sustained when depressive symptoms at Phase 1 were controlled for. No substantial evidence to support the hypothesised interaction of negative attributional style and negative life events was found. Conclusions. Findings were not supportive of the causal interaction proposed by the hopelessness theory of depression. Further work considering other time frames, using methods to prime attributional style before assessment and specifically assessing the hopelessness subtype of depression, may prove to be more fruitful. Intervention directly to address attributional style should also be considered. PMID:26290622

Development of a Premium Quality Plasma-derived IVIg (IQYMUNE®) Utilizing the Principles of Quality by Design-A Worked-through Case Study.

PubMed

Paolantonacci, Philippe; Appourchaux, Philippe; Claudel, Béatrice; Ollivier, Monique; Dennett, Richard; Siret, Laurent

2018-01-01

Polyvalent human normal immunoglobulins for intravenous use (IVIg), indicated for rare and often severe diseases, are complex plasma-derived protein preparations. A quality by design approach has been used to develop the Laboratoire Français du Fractionnement et des Biotechnologies new-generation IVIg, targeting a high level of purity to generate an enhanced safety profile while maintaining a high level of efficacy. A modular approach of quality by design was implemented consisting of five consecutive steps to cover all the stages from the product design to the final product control strategy.A well-defined target product profile was translated into 27 product quality attributes that formed the basis of the process design. In parallel, a product risk analysis was conducted and identified 19 critical quality attributes among the product quality attributes. Process risk analysis was carried out to establish the links between process parameters and critical quality attributes. Twelve critical steps were identified, and for each of these steps a risk mitigation plan was established.Among the different process risk mitigation exercises, five process robustness studies were conducted at qualified small scale with a design of experiment approach. For each process step, critical process parameters were identified and, for each critical process parameter, proven acceptable ranges were established. The quality risk management and risk mitigation outputs, including verification of proven acceptable ranges, were used to design the process verification exercise at industrial scale.Finally, the control strategy was established using a mix, or hybrid, of the traditional approach plus elements of the quality by design enhanced approach, as illustrated, to more robustly assign material and process controls and in order to securely meet product specifications.The advantages of this quality by design approach were improved process knowledge for industrial design and process validation and a clear justification of the process and product specifications as a basis for control strategy and future comparability exercises. © PDA, Inc. 2018.

Fuzzy Logic-based expert system for evaluating cake quality of freeze-dried formulations.

PubMed

Trnka, Hjalte; Wu, Jian X; Van De Weert, Marco; Grohganz, Holger; Rantanen, Jukka

2013-12-01

Freeze-drying of peptide and protein-based pharmaceuticals is an increasingly important field of research. The diverse nature of these compounds, limited understanding of excipient functionality, and difficult-to-analyze quality attributes together with the increasing importance of the biosimilarity concept complicate the development phase of safe and cost-effective drug products. To streamline the development phase and to make high-throughput formulation screening possible, efficient solutions for analyzing critical quality attributes such as cake quality with minimal material consumption are needed. The aim of this study was to develop a fuzzy logic system based on image analysis (IA) for analyzing cake quality. Freeze-dried samples with different visual quality attributes were prepared in well plates. Imaging solutions together with image analytical routines were developed for extracting critical visual features such as the degree of cake collapse, glassiness, and color uniformity. On the basis of the IA outputs, a fuzzy logic system for analysis of these freeze-dried cakes was constructed. After this development phase, the system was tested with a new screening well plate. The developed fuzzy logic-based system was found to give comparable quality scores with visual evaluation, making high-throughput classification of cake quality possible. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Who, What, When, Where? Determining the Health Implications of Wildfire Smoke Exposure

NASA Astrophysics Data System (ADS)

Ford, B.; Lassman, W.; Gan, R.; Burke, M.; Pfister, G.; Magzamen, S.; Fischer, E. V.; Volckens, J.; Pierce, J. R.

2016-12-01

Exposure to poor air quality is associated with negative impacts on human health. A large natural source of PM in the western U.S. is from wildland fires. Accurately attributing health endpoints to wildland-fire smoke requires a determination of the exposed population. This is a difficult endeavor because most current methods for monitoring air quality are not at high temporal and spatial resolutions. Therefore, there is a growing effort to include multiple datasets and create blended products of smoke exposure that can exploit the strengths of each dataset. In this work, we combine model (WRF-Chem) simulations, NASA satellite (MODIS) observations, and in-situ surface monitors to improve exposure estimates. We will also introduce a social-media dataset of self-reported smoke/haze/pollution to improve population-level exposure estimates for the summer of 2015. Finally, we use these detailed exposure estimates in different epidemiologic study designs to provide an in-depth understanding of the role wildfire exposure plays on health outcomes.

[Managerial knowledge required of the nurse in the family health program].

PubMed

Benito, Gladys Amélia Vélez; Becker, Luciana Corrêa; Duarte, Jefferson; Leite, Daniela Stuarte

2005-01-01

This article is a part of a study entitled "Managerial skills required of the nurse in the Family Health Program" which sought to identify the managerial knowledge required of nurses, to run the nursing services in the Family Health Units in a city on the coast of Santa Catarina. Taking the perspective of professionals working in these units, the study used the descriptive-exploratory method, with a quantitative approach and a semi-structured questionnaire. The study sample consisted of 72 participants, who attributed a score of between 1 and 5 for each item on the questionnaire. The results indicated an emphasis on the mastery of a good knowledge of SUS (the national Brazilian healthcare system) policies, which would lead to the development of skills by the nurses, enabling them to achieve a good performance and consequently, ensuring quality care and the concrete resolution of multiple problems, guaranteeing satisfaction for the community, a decrease in levels of epidemiology and a better quality of life for the population.

An approach to detecting deliberately introduced defects and micro-defects in 3D printed objects

NASA Astrophysics Data System (ADS)

Straub, Jeremy

2017-05-01

In prior work, Zeltmann, et al. demonstrated the negative impact that can be created by defects of various sizes in 3D printed objects. These defects may make the object unsuitable for its application or even present a hazard, if the object is being used for a safety-critical application. With the uses of 3D printing proliferating and consumer access to printers increasing, the desire of a nefarious individual or group to subvert the desired printing quality and safety attributes of a printer or printed object must be considered. Several different approaches to subversion may exist. Attackers may physically impair the functionality of the printer or launch a cyber-attack. Detecting introduced defects, from either attack, is critical to maintaining public trust in 3D printed objects and the technology. This paper presents an alternate approach. It applies a quality assurance technology based on visible light sensing to this challenge and assesses its capability for detecting introduced defects of multiple sizes.

A systematic review of parenting interventions for traumatic brain injury: child and parent outcomes.

PubMed

Brown, Felicity Louise; Whittingham, Koa; Boyd, Roslyn; Sofronoff, Kate

2013-01-01

To evaluate the efficacy of parenting interventions on child and parent behavioral and emotional outcomes for parents of children with traumatic brain injury (TBI). Systematic searches of 5 databases. Included studies were assessed for quality, and relevant data were extracted and collated. Eight articles met inclusion criteria, reporting 6 trials of interventions involving parent training for parents of children with TBI. Only 1 pre-post study trialed a version of a traditional parenting intervention. The remaining studies involved a multicomponent family problem-solving intervention. Each trial found a statistically significant intervention effect for at least 1 outcome measure. Interventions that train parents may be a useful approach to alleviate behavioral and emotional disturbances after pediatric TBI. Some evidence suggests that these interventions may help to improve parenting skill and adjustment. However, all identified studies included interventions with multiple treatment components, so the effects attributable to parent training alone remain undetermined. Further quality trials are needed to assess the unique effectiveness of parenting interventions in this population.

Urinary inorganic arsenic concentrations and semen quality of male partners of subfertile couples in Tokyo.

PubMed

Oguri, Tomoko; Yoshinaga, Jun; Toshima, Hiroki; Mizumoto, Yoshifumi; Hatakeyama, Shota; Tokuoka, Susumu

2016-01-01

Inorganic arsenic (iAs) has been known as a testicular toxicant in experimental rodents. Possible association between iAs exposure and semen quality (semen volume, sperm concentration, and sperm motility) was explored in male partners of couples (n = 42) who visited a gynecology clinic in Tokyo for infertility consultation. Semen parameters were measured according to WHO guideline at the clinic, and urinary iAs and methylarsonic acid (MMA), and dimethylarsinic acid concentrations were determined by liquid chromatography-hydride generation-ICP mass spectrometry. Biological attributes, dietary habits, and exposure levels to other chemicals with known effects on semen parameters were taken into consideration as covariates. Multiple regression analyses and logistic regression analyses did not find iAs exposure as significant contributor to semen parameters. Lower exposure level of subjects (estimated to be 0.5 μg kg(-1) day(-1)) was considered a reason of the absence of adverse effects on semen parameters, which were seen in rodents dosed with 4-7.5 mg kg(-1).

Multiple scattering and the density distribution of a Cs MOT.

PubMed

Overstreet, K; Zabawa, P; Tallant, J; Schwettmann, A; Shaffer, J

2005-11-28

Multiple scattering is studied in a Cs magneto-optical trap (MOT). We use two Abel inversion algorithms to recover density distributions of the MOT from fluorescence images. Deviations of the density distribution from a Gaussian are attributed to multiple scattering.

The effect of texture granularity on texture synthesis quality

NASA Astrophysics Data System (ADS)

Golestaneh, S. Alireza; Subedar, Mahesh M.; Karam, Lina J.

2015-09-01

Natural and artificial textures occur frequently in images and in video sequences. Image/video coding systems based on texture synthesis can make use of a reliable texture synthesis quality assessment method in order to improve the compression performance in terms of perceived quality and bit-rate. Existing objective visual quality assessment methods do not perform satisfactorily when predicting the synthesized texture quality. In our previous work, we showed that texture regularity can be used as an attribute for estimating the quality of synthesized textures. In this paper, we study the effect of another texture attribute, namely texture granularity, on the quality of synthesized textures. For this purpose, subjective studies are conducted to assess the quality of synthesized textures with different levels (low, medium, high) of perceived texture granularity using different types of texture synthesis methods.

Physician Service Attribution Methods for Examining Provision of Low-Value Care

PubMed Central

Chang, Eva; Buist, Diana SM; Handley, Matthew; Pardee, Roy; Gundersen, Gabrielle; Reid, Robert J.

2016-01-01

Objectives: There has been significant research on provider attribution for quality and cost. Low-value care is an area of heightened focus, with little of the focus being on measurement; a key methodological decision is how to attribute delivered services and procedures. We illustrate the difference in relative and absolute physician- and panel-attributed services and procedures using overuse in cervical cancer screening. Study Design: A retrospective, cross-sectional study in an integrated health care system. Methods: We used 2013 physician-level data from Group Health Cooperative to calculate two utilization attributions: (1) panel attribution with the procedure assigned to the physician’s predetermined panel, regardless of who performed the procedure; and (2) physician attribution with the procedure assigned to the performing physician. We calculated the percentage of low-value cervical cancer screening tests and ranked physicians within the clinic using the two utilization attribution methods. Results: The percentage of low-value cervical cancer screening varied substantially between physician and panel attributions. Across the whole delivery system, median panel- and physician-attributed percentages were 15 percent and 10 percent, respectively. Among sampled clinics, panel-attributed percentages ranged between 10 percent and 17 percent, and physician-attributed percentages ranged between 9 percent and 13 percent. Within a clinic, median panel-attributed screening percentage was 17 percent (range 0 percent–27 percent) and physician-attributed percentage was 11 percent (range 0 percent–24 percent); physician rank varied by attribution method. Conclusions: The attribution method is an important methodological decision when developing low-value care measures since measures may ultimately have an impact on national benchmarking and quality scores. Cross-organizational dialogue and transparency in low-value care measurement will become increasingly important for all stakeholders. PMID:28203612

Physician Service Attribution Methods for Examining Provision of Low-Value Care.

PubMed

Chang, Eva; Buist, Diana Sm; Handley, Matthew; Pardee, Roy; Gundersen, Gabrielle; Reid, Robert J

2016-01-01

There has been significant research on provider attribution for quality and cost. Low-value care is an area of heightened focus, with little of the focus being on measurement; a key methodological decision is how to attribute delivered services and procedures. We illustrate the difference in relative and absolute physician- and panel-attributed services and procedures using overuse in cervical cancer screening. A retrospective, cross-sectional study in an integrated health care system. We used 2013 physician-level data from Group Health Cooperative to calculate two utilization attributions: (1) panel attribution with the procedure assigned to the physician's predetermined panel, regardless of who performed the procedure; and (2) physician attribution with the procedure assigned to the performing physician. We calculated the percentage of low-value cervical cancer screening tests and ranked physicians within the clinic using the two utilization attribution methods. The percentage of low-value cervical cancer screening varied substantially between physician and panel attributions. Across the whole delivery system, median panel- and physician-attributed percentages were 15 percent and 10 percent, respectively. Among sampled clinics, panel-attributed percentages ranged between 10 percent and 17 percent, and physician-attributed percentages ranged between 9 percent and 13 percent. Within a clinic, median panel-attributed screening percentage was 17 percent (range 0 percent-27 percent) and physician-attributed percentage was 11 percent (range 0 percent-24 percent); physician rank varied by attribution method. The attribution method is an important methodological decision when developing low-value care measures since measures may ultimately have an impact on national benchmarking and quality scores. Cross-organizational dialogue and transparency in low-value care measurement will become increasingly important for all stakeholders.

Algal Attributes: An Autecological Classification of Algal Taxa Collected by the National Water-Quality Assessment Program

USGS Publications Warehouse

Porter, Stephen D.

2008-01-01

Algae are excellent indicators of water-quality conditions, notably nutrient and organic enrichment, and also are indicators of major ion, dissolved oxygen, and pH concentrations and stream microhabitat conditions. The autecology, or physiological optima and tolerance, of algal species for various water-quality contaminants and conditions is relatively well understood for certain groups of freshwater algae, notably diatoms. However, applications of autecological information for water-quality assessments have been limited because of challenges associated with compiling autecological literature from disparate sources, tracking name changes for a large number of algal species, and creating an autecological data base from which algal-indicator metrics can be calculated. A comprehensive summary of algal autecological attributes for North American streams and rivers does not exist. This report describes a large, digital data file containing 28,182 records for 5,939 algal taxa, generally species or variety, collected by the U.S. Geological Survey?s National Water-Quality Assessment (NAWQA) Program. The data file includes 37 algal attributes classified by over 100 algal-indicator codes or metrics that can be calculated easily with readily available software. Algal attributes include qualitative classifications based on European and North American autecological literature, and semi-quantitative, weighted-average regression approaches for estimating optima using regional and national NAWQA data. Applications of algal metrics in water-quality assessments are discussed and national quartile distributions of metric scores are shown for selected indicator metrics.

Measuring Software Product Quality: The ISO 25000 Series and CMMI

DTIC Science & Technology

2004-06-14

performance objectives” covers objectives and requirements for product quality, service quality , and process performance. Process performance objectives...such that product quality, service quality , and process performance attributes are measurable and controlled throughout the project (internal and

Talent identification and recruitment in youth soccer: Recruiter's perceptions of the key attributes for player recruitment.

PubMed

Larkin, Paul; O'Connor, Donna

2017-01-01

Using the modified Delphi method, we aimed to understand the attributes youth coaches and recruiters perceive as important when identifying skilled youth performance at the entry level of representative soccer in Australia (i.e., Under 13 years). Furthermore, we also aimed to describe the current methods youth coaches and recruiters use to assess and identify these attributes in youth players. Australian regional youth technical directors and coaches (n = 20) completed a three stage process, including an initial interview and two subsequent questionnaires, whereby attributes and qualities associated with talent identification were rated and justified according to the importance for youth player performance and talent identification. Results indicate a hierarchy of attributes recruiters perceive as important for Under 13 soccer performance, including technical (i.e., first touch, striking the ball, one-versus-one ability, and technical ability under pressure), tactical (i.e., decision-making ability) and psychological attributes (i.e., coachability and positive attitude). In addition, the findings indicated attributes and qualities not emphasised within the talent identification process including, physiological, anthropometrical, sociological and several psychological attributes. It is suggested talent recruiters apply a holistic multidisciplinary approach to talent identification, with the current findings potentially providing initial evidence to suggest recruiters do consider numerous attributes when selecting and identifying youth players.

Talent identification and recruitment in youth soccer: Recruiter’s perceptions of the key attributes for player recruitment

PubMed Central

2017-01-01

Using the modified Delphi method, we aimed to understand the attributes youth coaches and recruiters perceive as important when identifying skilled youth performance at the entry level of representative soccer in Australia (i.e., Under 13 years). Furthermore, we also aimed to describe the current methods youth coaches and recruiters use to assess and identify these attributes in youth players. Australian regional youth technical directors and coaches (n = 20) completed a three stage process, including an initial interview and two subsequent questionnaires, whereby attributes and qualities associated with talent identification were rated and justified according to the importance for youth player performance and talent identification. Results indicate a hierarchy of attributes recruiters perceive as important for Under 13 soccer performance, including technical (i.e., first touch, striking the ball, one-versus-one ability, and technical ability under pressure), tactical (i.e., decision-making ability) and psychological attributes (i.e., coachability and positive attitude). In addition, the findings indicated attributes and qualities not emphasised within the talent identification process including, physiological, anthropometrical, sociological and several psychological attributes. It is suggested talent recruiters apply a holistic multidisciplinary approach to talent identification, with the current findings potentially providing initial evidence to suggest recruiters do consider numerous attributes when selecting and identifying youth players. PMID:28419175

Outlook with conservative treatment of peptic oesophageal stricture.

PubMed Central

Ogilvie, A L; Ferguson, R; Atkinson, M

1980-01-01

In order to assess the outlook for patients with peptic oesophageal strictures treated by Eder Puestow dilatation at fibreoptic endoscopy, 50 patients were followed up for periods ranging from nine months to four years. Twenty patients (40%) required only a single dilatation, and the remaining 30 (60%) required multiple dilatations. The frequency of dilatation tended to decrease with time. There was one death attributable to the procedure. Two patients developed an adenocarcinoma at the site of the stricture. We conclude that conservative management of peptic oesophageal stricture combining the use of dilatation at fibreoptic endoscopy with medical measures to control gastro-oesophageal reflux offers a relatively safe means of providing symptomatic relief, maintaining nutrition, and allowing the patient an acceptable quality of life. PMID:7364314

[Predictive factors of depression in adolescents at school: the role of implicit theories of intelligence].

PubMed

Da Fonseca, D; Cury, F; Rufo, M; Poinso, F

2007-10-01

The aim of this study was to complete the identification of predictive factors of depression during adolescence. For some authors, depression is characterized by a style of attribution, which consists essentially in attributing most of the negative outcomes to internal, stable, and uncontrollable factors. It seems that these attributions depend essentially on the type of their beliefs and in particular, those concerning the nature of intelligence. These beliefs called "implicit theories of intelligence", are the entity theory of intelligence and the incremental theory of intelligence. The entity theory of intelligence corresponds to the belief according to which intelligence is the expression of a relatively stable, fixed, and noncontrollable feature, and which we cannot change. In contrast, the incremental theory corresponds to the belief according to which intelligence is a controllable quality, which we can develop through effort and work. Several studies have demonstrated that the adolescents who consider intelligence as a malleable quality explain their bad results by internal, unstable, and controllable factors. Conversely, students who consider intelligence as a fixed capacity tend to strongly attribute their failure to internal, stable, and uncontrollable factors. We have consequently formulated the hypothesis according to which the entity theory should be a predictive factor of depression. We have also tested the fact that anxiety should be a mediating factor within the relation between the entity theory and depression. The sample was composed of 424 adolescents. Using different questionnaires, we measured implicit theories of the intelligence (TIDI), self-esteem (EES), anxiety (STAI-Form Y-B) and depression (CDI). Multiple regression analyses demonstrated that the entity theory of intelligence positively predicts depression. Self-esteem negatively predicts anxiety and depression. Moreover, anxiety is a mediator of the relation between self-esteem and depression, on one hand, and the relation between the entity theory of intelligence and depression, on the other. Finally, the effect of the entity theory of intelligence appears to be modulated by the level of self-esteem. This study explains the mechanisms by which the implicit theories of intelligence engender anxiety and depression. Furthermore, this approach provides interesting perspectives in the prevention and management of adolescents presenting depression.

Reconciling the Structural Attributes of Avian Antibodies*

PubMed Central

Conroy, Paul J.; Law, Ruby H. P.; Gilgunn, Sarah; Hearty, Stephen; Caradoc-Davies, Tom T.; Lloyd, Gordon; O'Kennedy, Richard J.; Whisstock, James C.

2014-01-01

Antibodies are high value therapeutic, diagnostic, biotechnological, and research tools. Combinatorial approaches to antibody discovery have facilitated access to unique antibodies by surpassing the diversity limitations of the natural repertoire, exploitation of immune repertoires from multiple species, and tailoring selections to isolate antibodies with desirable biophysical attributes. The V-gene repertoire of the chicken does not utilize highly diverse sequence and structures, which is in stark contrast to the mechanism employed by humans, mice, and primates. Recent exploitation of the avian immune system has generated high quality, high affinity antibodies to a wide range of antigens for a number of therapeutic, diagnostic and biotechnological applications. Furthermore, extensive examination of the amino acid characteristics of the chicken repertoire has provided significant insight into mechanisms employed by the avian immune system. A paucity of avian antibody crystal structures has limited our understanding of the structural consequences of these uniquely chicken features. This paper presents the crystal structure of two chicken single chain fragment variable (scFv) antibodies generated from large libraries by phage display against important human antigen targets, which capture two unique CDRL1 canonical classes in the presence and absence of a non-canonical disulfide constrained CDRH3. These structures cast light on the unique structural features of chicken antibodies and contribute further to our collective understanding of the unique mechanisms of diversity and biochemical attributes that render the chicken repertoire of particular value for antibody generation. PMID:24737329

[Study on the optimization of monitoring indicators of drinking water quality during health supervision].

PubMed

Ye, Bixiong; E, Xueli; Zhang, Lan

2015-01-01

To optimize non-regular drinking water quality indices (except Giardia and Cryptosporidium) of urban drinking water. Several methods including drinking water quality exceed the standard, the risk of exceeding standard, the frequency of detecting concentrations below the detection limit, water quality comprehensive index evaluation method, and attribute reduction algorithm of rough set theory were applied, redundancy factor of water quality indicators were eliminated, control factors that play a leading role in drinking water safety were found. Optimization results showed in 62 unconventional water quality monitoring indicators of urban drinking water, 42 water quality indicators could be optimized reduction by comprehensively evaluation combined with attribute reduction of rough set. Optimization of the water quality monitoring indicators and reduction of monitoring indicators and monitoring frequency could ensure the safety of drinking water quality while lowering monitoring costs and reducing monitoring pressure of the sanitation supervision departments.

Efficacy of Sweet Potato Powder and Added Water as Fat Replacer on the Quality Attributes of Low-fat Pork Patties.

PubMed

Verma, Akhilesh K; Chatli, Manish Kumar; Kumar, Devendra; Kumar, Pavan; Mehta, Nitin

2015-02-01

The present study was conducted to investigate the efficacy of sweet potato powder (SPP) and water as a fat replacer in low-fat pork patties. Low-fat pork patties were developed by replacing the added fat with combinations of SPP and chilled water. Three different levels of SPP/chilled water viz. 0.5/9.5% (T-1), 1.0/9.0% (T-2), and 1.5/8.5% (T-3) were compared with a control containing 10% animal fat. The quality of low-fat pork patties was evaluated for physico-chemical (pH, emulsion stability, cooking yield, aw), proximate, instrumental colour and textural profile, and sensory attributes. The cooking yield and emulsion stability improved (p<0.05) in all treatments over the control and were highest in T-2. Instrumental texture profile attributes and hardness decreased, whereas cohesiveness increased compared with control, irrespective of SPP level. Dimensional parameters (% gain in height and % decrease in diameter) were better maintained during cooking in the low-fat product than control. The sensory quality attributes juiciness, texture and overall acceptability of T-2 and T-3 were (p<0.05) higher than control. Results concluded that low-fat pork patties with acceptable sensory attributes, improved cooking yield and textural attributes can be successfully developed with the incorporation of a combination of 1.0% SPP and 9.0% chilled water.

Efficacy of Sweet Potato Powder and Added Water as Fat Replacer on the Quality Attributes of Low-fat Pork Patties

PubMed Central

Verma, Akhilesh K.; Chatli, Manish Kumar; Kumar, Devendra; Kumar, Pavan; Mehta, Nitin

2015-01-01

The present study was conducted to investigate the efficacy of sweet potato powder (SPP) and water as a fat replacer in low-fat pork patties. Low-fat pork patties were developed by replacing the added fat with combinations of SPP and chilled water. Three different levels of SPP/chilled water viz. 0.5/9.5% (T-1), 1.0/9.0% (T-2), and 1.5/8.5% (T-3) were compared with a control containing 10% animal fat. The quality of low-fat pork patties was evaluated for physico-chemical (pH, emulsion stability, cooking yield, aw), proximate, instrumental colour and textural profile, and sensory attributes. The cooking yield and emulsion stability improved (p<0.05) in all treatments over the control and were highest in T-2. Instrumental texture profile attributes and hardness decreased, whereas cohesiveness increased compared with control, irrespective of SPP level. Dimensional parameters (% gain in height and % decrease in diameter) were better maintained during cooking in the low-fat product than control. The sensory quality attributes juiciness, texture and overall acceptability of T-2 and T-3 were (p<0.05) higher than control. Results concluded that low-fat pork patties with acceptable sensory attributes, improved cooking yield and textural attributes can be successfully developed with the incorporation of a combination of 1.0% SPP and 9.0% chilled water. PMID:25557822

A multidimensional model of optimal participation of children with physical disabilities.

PubMed

Kang, Lin-Ju; Palisano, Robert J; King, Gillian A; Chiarello, Lisa A

2014-01-01

To present a conceptual model of optimal participation in recreational and leisure activities for children with physical disabilities. The conceptualization of the model was based on review of contemporary theories and frameworks, empirical research and the authors' practice knowledge. A case scenario is used to illustrate application to practice. The model proposes that optimal participation in recreational and leisure activities involves the dynamic interaction of multiple dimensions and determinants of participation. The three dimensions of participation are physical, social and self-engagement. Determinants of participation encompass attributes of the child, family and environment. Experiences of optimal participation are hypothesized to result in long-term benefits including better quality of life, a healthier lifestyle and emotional and psychosocial well-being. Consideration of relevant child, family and environment determinants of dimensions of optimal participation should assist children, families and health care professionals to identify meaningful goals and outcomes and guide the selection and implementation of innovative therapy approaches and methods of service delivery. Implications for Rehabilitation Optimal participation is proposed to involve the dynamic interaction of physical, social and self-engagement and attributes of the child, family and environment. The model emphasizes the importance of self-perceptions and participation experiences of children with physical disabilities. Optimal participation may have a positive influence on quality of life, a healthy lifestyle and emotional and psychosocial well-being. Knowledge of child, family, and environment determinants of physical, social and self-engagement should assist children, families and professionals in identifying meaningful goals and guiding innovative therapy approaches.

Antibody performance in ChIP-sequencing assays: From quality scores of public data sets to quantitative certification.

PubMed

Mendoza-Parra, Marco-Antonio; Saravaki, Vincent; Cholley, Pierre-Etienne; Blum, Matthias; Billoré, Benjamin; Gronemeyer, Hinrich

2016-01-01

We have established a certification system for antibodies to be used in chromatin immunoprecipitation assays coupled to massive parallel sequencing (ChIP-seq). This certification comprises a standardized ChIP procedure and the attribution of a numerical quality control indicator (QCi) to biological replicate experiments. The QCi computation is based on a universally applicable quality assessment that quantitates the global deviation of randomly sampled subsets of ChIP-seq dataset with the original genome-aligned sequence reads. Comparison with a QCi database for >28,000 ChIP-seq assays were used to attribute quality grades (ranging from 'AAA' to 'DDD') to a given dataset. In the present report we used the numerical QC system to assess the factors influencing the quality of ChIP-seq assays, including the nature of the target, the sequencing depth and the commercial source of the antibody.  We have used this approach specifically to certify mono and polyclonal antibodies obtained from Active Motif directed against the histone modification marks H3K4me3, H3K27ac and H3K9ac for ChIP-seq. The antibodies received the grades AAA to BBC ( www.ngs-qc.org). We propose to attribute such quantitative grading of all antibodies attributed with the label "ChIP-seq grade".

Multiscale predictions of aviation-attributable PM2.5 for U.S. airports modeled using CMAQ with plume-in-grid and an aircraft-specific 1-D emission model

EPA Science Inventory

Aviation activities represent an important and unique mode of transportation, but also impact air quality. In this study, we aim to quantify the impact of aircraft on air quality, focusing on aviation-attributable PM2.5 at scales ranging from local (a few kilometers) to continent...

Rice Grain Quality and Consumer Preferences: A Case Study of Two Rural Towns in the Philippines

PubMed Central

Velarde, Orlee; Demont, Matty

2016-01-01

Hedonic pricing analysis is conducted to determine the implicit values of various attributes in the market value of a good. In this study, hedonic pricing analysis was applied to measure the contribution of grain quality search and experience attributes to the price of rice in two rural towns in the Philippines. Rice samples from respondents underwent quantitative routine assessments of grain quality. In particular, gelatinization temperature and chalkiness, two parameters that are normally assessed through visual scores, were evaluated by purely quantitative means (differential scanning calorimetry and by digital image analysis). Results indicate that rice consumed by respondents had mainly similar physical and chemical grain quality attributes. The respondents’ revealed preferences were typical of what has been previously reported for Filipino rice consumers. Hedonic regression analyses showed that grain quality characteristics that affected price varied by income class. Some of the traits or socioeconomic factors that affected price were percent broken grains, gel consistency, and household per capita rice consumption. There is an income effect on rice price and the characteristics that affect price vary between income classes. PMID:26982587

Rice Grain Quality and Consumer Preferences: A Case Study of Two Rural Towns in the Philippines.

PubMed

Cuevas, Rosa Paula; Pede, Valerien O; McKinley, Justin; Velarde, Orlee; Demont, Matty

2016-01-01

Hedonic pricing analysis is conducted to determine the implicit values of various attributes in the market value of a good. In this study, hedonic pricing analysis was applied to measure the contribution of grain quality search and experience attributes to the price of rice in two rural towns in the Philippines. Rice samples from respondents underwent quantitative routine assessments of grain quality. In particular, gelatinization temperature and chalkiness, two parameters that are normally assessed through visual scores, were evaluated by purely quantitative means (differential scanning calorimetry and by digital image analysis). Results indicate that rice consumed by respondents had mainly similar physical and chemical grain quality attributes. The respondents' revealed preferences were typical of what has been previously reported for Filipino rice consumers. Hedonic regression analyses showed that grain quality characteristics that affected price varied by income class. Some of the traits or socioeconomic factors that affected price were percent broken grains, gel consistency, and household per capita rice consumption. There is an income effect on rice price and the characteristics that affect price vary between income classes.

Understanding apple consumers' expectations in terms of likes and dislikes. Use of comment analysis in a cross-cultural study.

PubMed

Galmarini, M V; Symoneaux, R; Chollet, S; Zamora, M C

2013-03-01

Apple consumers' expectations in Argentina and France were studied by comment analysis of open-ended questions. In an on-line survey consumers stated: attributes which defined quality in an apple; visual, flavor and texture characteristics they liked/did not like to find in an apple. Influence of country, consumption frequency and cultivar knowledge were analyzed by contingency tables, Chi-square per cell tests and Multiple Factor Analysis. Consumers' quality expectations were not the same in both countries. Argentineans and French consumers agreed that quality apples should be juicy (most used term in both countries), tasty, firm and fresh. However, for Argentineans quality was more related to visual characteristics, whereas for French it was driven by flavor. Argentineans used more words but French were more specific, particularly for flavour description. Moreover, frequency of consumption, varieties knowledge and the number of terms given were highly related. Frequent consumers knew more varieties and were more prolific in relation to flavour. Less frequent consumers knew fewer apple varieties and gave more words in the visual category. The use of comment analysis allowed identifying the terms that consumers used in their day to day life to describe apples, finding separately likes and dislikes, in spite of the different languages. Copyright © 2012 Elsevier Ltd. All rights reserved.

Electronic health information quality challenges and interventions to improve public health surveillance data and practice.

PubMed

Dixon, Brian E; Siegel, Jason A; Oemig, Tanya V; Grannis, Shaun J

2013-01-01

We examined completeness, an attribute of data quality, in the context of electronic laboratory reporting (ELR) of notifiable disease information to public health agencies. We extracted more than seven million ELR messages from multiple clinical information systems in two states. We calculated and compared the completeness of various data fields within the messages that were identified to be important to public health reporting processes. We compared unaltered, original messages from source systems with similar messages from another state as well as messages enriched by a health information exchange (HIE). Our analysis focused on calculating completeness (i.e., the number of nonmissing values) for fields deemed important for inclusion in notifiable disease case reports. The completeness of data fields for laboratory transactions varied across clinical information systems and jurisdictions. Fields identifying the patient and test results were usually complete (97%-100%). Fields containing patient demographics, patient contact information, and provider contact information were suboptimal (6%-89%). Transactions enhanced by the HIE were found to be more complete (increases ranged from 2% to 25%) than the original messages. ELR data from clinical information systems can be of suboptimal quality. Public health monitoring of data sources and augmentation of ELR message content using HIE services can improve data quality.

Image quality guided approach for adaptive modelling of biometric intra-class variations

NASA Astrophysics Data System (ADS)

Abboud, Ali J.; Jassim, Sabah A.

2010-04-01

The high intra-class variability of acquired biometric data can be attributed to several factors such as quality of acquisition sensor (e.g. thermal), environmental (e.g. lighting), behavioural (e.g. change face pose). Such large fuzziness of biometric data can cause a big difference between an acquired and stored biometric data that will eventually lead to reduced performance. Many systems store multiple templates in order to account for such variations in the biometric data during enrolment stage. The number and typicality of these templates are the most important factors that affect system performance than other factors. In this paper, a novel offline approach is proposed for systematic modelling of intra-class variability and typicality in biometric data by regularly selecting new templates from a set of available biometric images. Our proposed technique is a two stage algorithm whereby in the first stage image samples are clustered in terms of their image quality profile vectors, rather than their biometric feature vectors, and in the second stage a per cluster template is selected from a small number of samples in each clusters to create an ultimate template sets. These experiments have been conducted on five face image databases and their results will demonstrate the effectiveness of proposed quality guided approach.

A reconnaissance analysis of groundwater quality in the Eagle Ford shale region reveals two distinct bromide/chloride populations.

PubMed

Hildenbrand, Zacariah L; Carlton, Doug D; Meik, Jesse M; Taylor, Josh T; Fontenot, Brian E; Walton, Jayme L; Henderson, Drew; Thacker, Jonathan B; Korlie, Stephanie; Whyte, Colin J; Hudak, Paul F; Schug, Kevin A

2017-01-01

The extraction of oil and natural gas from unconventional shale formations has prompted a series of investigations to examine the quality of the groundwater in the overlying aquifers. Here we present a reconnaissance analysis of groundwater quality in the Eagle Ford region of southern Texas. These data reveal two distinct sample populations that are differentiable by bromide/chloride ratios. Elevated levels of fluoride, nitrate, sulfate, various metal ions, and the detection of exotic volatile organic compounds highlight a high bromide group of samples, which is geographically clustered, while encompassing multiple hydrogeological strata. Samples with bromide/chloride ratios representative of connate water displayed elevated levels of total organic carbon, while revealing the detection of alcohols and chlorinated compounds. These findings suggest that groundwater quality in the Western Gulf Basin is, for the most part, controlled by a series of natural processes; however, there is also evidence of episodic contamination events potentially attributed to unconventional oil and gas development or other anthropogenic activities. Collectively, this characterization of natural groundwater constituents and exogenous compounds will guide targeted remediation efforts and provides insight for agricultural entities, industrial operators, and rural communities that rely on groundwater in southern Texas. Copyright © 2016 Elsevier B.V. All rights reserved.

Naturalness and interestingness of test images for visual quality evaluation

NASA Astrophysics Data System (ADS)

Halonen, Raisa; Westman, Stina; Oittinen, Pirkko

2011-01-01

Balanced and representative test images are needed to study perceived visual quality in various application domains. This study investigates naturalness and interestingness as image quality attributes in the context of test images. Taking a top-down approach we aim to find the dimensions which constitute naturalness and interestingness in test images and the relationship between these high-level quality attributes. We compare existing collections of test images (e.g. Sony sRGB images, ISO 12640 images, Kodak images, Nokia images and test images developed within our group) in an experiment combining quality sorting and structured interviews. Based on the data gathered we analyze the viewer-supplied criteria for naturalness and interestingness across image types, quality levels and judges. This study advances our understanding of subjective image quality criteria and enables the validation of current test images, furthering their development.

Quality attributes of pistachio nuts as affected by rootstock and deficit irrigation.

PubMed

Carbonell-Barrachina, Ángel A; Memmi, Houssem; Noguera-Artiaga, Luis; Gijón-López, María del Carmen; Ciapa, Rafał; Pérez-López, David

2015-11-01

In this work, the influence of two regulated deficit irrigation (RDI) treatments and three different rootstocks on the quality of pistachios was evaluated by analyzing different parameters: morphological analysis, physicochemical analysis and sensory analysis. The results obtained in terms of the choice of rootstock revealed that Pistacia atlantica had increased production yields, nut weight, mineral content, higher intensities of characteristic sensory attributes and a higher degree of consumer satisfaction, than the other rootstocks studied. Moreover, the results established that the application of RDI on pistachio cultivation had no significant influence on production yield, weight, size, colour, water activity or mineral composition. Furthermore, T1 treatment (stem water potential < -1.3 MPa) resulted in higher intensities of characteristic sensory attributes and a greater level of satisfaction among international consumers. These results confirm that the application of deficit irrigation (T1) contributes to an increase in overall product quality. Furthermore, Pistacia atlantica rootstock provided better yield and quality than the other rootstocks studied. © 2014 Society of Chemical Industry.

VennDIS: a JavaFX-based Venn and Euler diagram software to generate publication quality figures.

PubMed

Ignatchenko, Vladimir; Ignatchenko, Alexandr; Sinha, Ankit; Boutros, Paul C; Kislinger, Thomas

2015-04-01

Venn diagrams are graphical representations of the relationships among multiple sets of objects and are often used to illustrate similarities and differences among genomic and proteomic datasets. All currently existing tools for producing Venn diagrams evince one of two traits; they require expertise in specific statistical software packages (such as R), or lack the flexibility required to produce publication-quality figures. We describe a simple tool that addresses both shortcomings, Venn Diagram Interactive Software (VennDIS), a JavaFX-based solution for producing highly customizable, publication-quality Venn, and Euler diagrams of up to five sets. The strengths of VennDIS are its simple graphical user interface and its large array of customization options, including the ability to modify attributes such as font, style and position of the labels, background color, size of the circle/ellipse, and outline color. It is platform independent and provides real-time visualization of figure modifications. The created figures can be saved as XML files for future modification or exported as high-resolution images for direct use in publications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Quality by Design approach to spray drying processing of crystalline nanosuspensions.

PubMed

Kumar, Sumit; Gokhale, Rajeev; Burgess, Diane J

2014-04-10

Quality by Design (QbD) principles were explored to understand spray drying process for the conversion of liquid nanosuspensions into solid nano-crystalline dry powders using indomethacin as a model drug. The effects of critical process variables: inlet temperature, flow and aspiration rates on critical quality attributes (CQAs): particle size, moisture content, percent yield and crystallinity were investigated employing a full factorial design. A central cubic design was employed to generate the response surface for particle size and percent yield. Multiple linear regression analysis and ANOVA were employed to identify and estimate the effect of critical parameters, establish their relationship with CQAs, create design space and model the spray drying process. Inlet temperature was identified as the only significant factor (p value <0.05) to affect dry powder particle size. Higher inlet temperatures caused drug surface melting and hence aggregation of the dried nano-crystalline powders. Aspiration and flow rates were identified as significant factors affecting yield (p value <0.05). Higher yields were obtained at higher aspiration and lower flow rates. All formulations had less than 3% (w/w) moisture content. Formulations dried at higher inlet temperatures had lower moisture compared to those dried at lower inlet temperatures. Published by Elsevier B.V.

Program and Teacher Characteristics Predicting the Implementation of Banking Time with Preschoolers Who Display Disruptive Behaviors.

PubMed

Williford, Amanda P; Wolcott, Catherine Sanger; Whittaker, Jessica Vick; Locasale-Crouch, Jennifer

2015-11-01

This study examined the relationship among baseline program and teacher characteristics and subsequent implementation of Banking Time. Banking Time is a dyadic intervention intended to improve a teacher's interaction quality with a specific child. Banking Time implementation was examined in the current study using a sample of 59 teachers and preschool children displaying disruptive behaviors in the classroom (~three children per classroom). Predictors included preschool program type, teacher demographic characteristics (personal and professional), and teacher beliefs (self-efficacy, authoritarian beliefs, and negative attributions about child disruptive behavior). Multiple measures and methods (i.e., teacher report, consultant report, independent observations) were used to assess implementation. We created three implementation composite measures (dosage, quality, and generalized practice) that had high internal consistencies within each composite but were only modestly associated with one another, suggesting unique constructs of implementation. We found that type of preschool program was associated with dosage and quality. Aspects of teacher demographics related to all three implementation composites. Teacher beliefs predicted dosage and generalized practice. Results suggest that the factors that predict the implementation of Banking Time vary as a function of the type of implementation being assessed.

Multiple functional attributes of glucose-monitoring neurons in the medial orbitofrontal (ventrolateral prefrontal) cortex.

PubMed

Szabó, István; Hormay, Edina; Csetényi, Bettina; Nagy, Bernadett; Lénárd, László; Karádi, Zoltán

2018-02-01

Multiple functional attributes of glucose-monitoring neurons in the medial orbitofrontal (ventrolateral prefrontal) cortex. NEUROSCI BIOBEHAV REV 73(1) XXX-XXX, 2017.- Special chemosensory cells, the glucose-monitoring (GM) neurons, reportedly involved in the central feeding control, exist in the medial orbitofrontal (ventrolateral prefrontal) cortex (mVLPFC). Electrophysiological, metabolic and behavioral studies reveal complex functional attributes of these cells and raise their homeostatic significance. Single neuron recordings, by means of the multibarreled microelectrophoretic technique, elucidate differential sensitivities of limbic forebrain neurons in the rat and the rhesus monkey to glucose and other chemicals, whereas gustatory stimulations demonstrate their distinct taste responsiveness. Metabolic examinations provide evidence for alteration of blood glucose level in glucose tolerance test and elevation of plasma triglyceride concentration after destruction of the local GM cells by streptozotocin (STZ). In behavioral studies, STZ microinjection into the mVLPFC fails to interfere with the acquisition of saccharin conditioned taste avoidance, does cause, however, taste perception deficit in taste reactivity tests. Multiple functional attributes of GM neurons in the mVLPFC, within the frame of the hierarchically organized central GM neuronal network, appear to play important role in the maintenance of the homeostatic balance. Copyright © 2017 Elsevier Ltd. All rights reserved.

Proclaimed Graduate Attributes of Australian Universities: Patterns, Problems and Prospects

ERIC Educational Resources Information Center

Donleavy, Gabriel

2012-01-01

Purpose: Graduate attributes are about to be policed by the Tertiary Education Quality and Standards Agency (TEQSA) in Australia. All universities proclaim them on their public web sites. The aim of this paper is to determine whether distinct patterns or clusters are apparent in the declared graduate attributes declared by Australian universities…

Enabling Incremental Iterative Development at Scale: Quality Attribute Refinement and Allocation in Practice

DTIC Science & Technology

2015-06-01

abstract constraints along six dimen- sions for expansion: user, actions, data , business rules, interfaces, and quality attributes [Gottesdiener 2010...relevant open source systems. For example, the CONNECT and HADOOP Distributed File System (HDFS) projects have many user stories that deal with...Iteration Zero involves architecture planning before writing any code. An overly long Iteration Zero is equivalent to the dysfunctional “ Big Up-Front

Validating MMI Scores: Are We Measuring Multiple Attributes?

ERIC Educational Resources Information Center

Oliver, Tom; Hecker, Kent; Hausdorf, Peter A.; Conlon, Peter

2014-01-01

The multiple mini-interview (MMI) used in health professional schools' admission processes is reported to assess multiple non-cognitive constructs such as ethical reasoning, oral communication, or problem evaluation. Though validation studies have been performed with total MMI scores, there is a paucity of information regarding how well MMI…

Single-step affinity purification of enzyme biotherapeutics: a platform methodology for accelerated process development.

PubMed

Brower, Kevin P; Ryakala, Venkat K; Bird, Ryan; Godawat, Rahul; Riske, Frank J; Konstantinov, Konstantin; Warikoo, Veena; Gamble, Jean

2014-01-01

Downstream sample purification for quality attribute analysis is a significant bottleneck in process development for non-antibody biologics. Multi-step chromatography process train purifications are typically required prior to many critical analytical tests. This prerequisite leads to limited throughput, long lead times to obtain purified product, and significant resource requirements. In this work, immunoaffinity purification technology has been leveraged to achieve single-step affinity purification of two different enzyme biotherapeutics (Fabrazyme® [agalsidase beta] and Enzyme 2) with polyclonal and monoclonal antibodies, respectively, as ligands. Target molecules were rapidly isolated from cell culture harvest in sufficient purity to enable analysis of critical quality attributes (CQAs). Most importantly, this is the first study that demonstrates the application of predictive analytics techniques to predict critical quality attributes of a commercial biologic. The data obtained using the affinity columns were used to generate appropriate models to predict quality attributes that would be obtained after traditional multi-step purification trains. These models empower process development decision-making with drug substance-equivalent product quality information without generation of actual drug substance. Optimization was performed to ensure maximum target recovery and minimal target protein degradation. The methodologies developed for Fabrazyme were successfully reapplied for Enzyme 2, indicating platform opportunities. The impact of the technology is significant, including reductions in time and personnel requirements, rapid product purification, and substantially increased throughput. Applications are discussed, including upstream and downstream process development support to achieve the principles of Quality by Design (QbD) as well as integration with bioprocesses as a process analytical technology (PAT). © 2014 American Institute of Chemical Engineers.

Quality of Public Open Spaces and Recreational Walking

PubMed Central

Gunn, Lucy D.; Christian, Hayley; Francis, Jacinta; Foster, Sarah; Hooper, Paula; Owen, Neville; Giles-Corti, Billie

2015-01-01

Objectives. We examined associations between specific public open space (POS) attributes and recreational walking to local POS. Methods. Between October 2004 and December 2006, 1465 adults of the RESIDential Environments Project, conducted in Perth, Australia, reported whether they walk to a POS for recreation. For each participant, we identified all open spaces larger than 0.8 hectares within 1.6 kilometers from home. On the basis of field audit data, we created 3 scores (presence, count, size-weighted presence) for 19 specific open space attributes. Results. With logistic regression analyses, we found that walking to a POS was associated with the presence of gardens, grassed areas, walking paths, water features, wildlife, amenities, dog-related facilities, and off-leash areas for dogs. It was also associated with the highest number of these attributes in a single open space, but not with the total number of attributes in all POSs within 1.6 kilometers of home. Conclusions. Building 1 high-quality local park may be more effective in promoting recreational walking than is providing many average-quality parks. PMID:26469676

Using Cluster Analysis to Compartmentalize a Large Managed Wetland Based on Physical, Biological, and Climatic Geospatial Attributes.

PubMed

Hahus, Ian; Migliaccio, Kati; Douglas-Mankin, Kyle; Klarenberg, Geraldine; Muñoz-Carpena, Rafael

2018-04-27

Hierarchical and partitional cluster analyses were used to compartmentalize Water Conservation Area 1, a managed wetland within the Arthur R. Marshall Loxahatchee National Wildlife Refuge in southeast Florida, USA, based on physical, biological, and climatic geospatial attributes. Single, complete, average, and Ward's linkages were tested during the hierarchical cluster analyses, with average linkage providing the best results. In general, the partitional method, partitioning around medoids, found clusters that were more evenly sized and more spatially aggregated than those resulting from the hierarchical analyses. However, hierarchical analysis appeared to be better suited to identify outlier regions that were significantly different from other areas. The clusters identified by geospatial attributes were similar to clusters developed for the interior marsh in a separate study using water quality attributes, suggesting that similar factors have influenced variations in both the set of physical, biological, and climatic attributes selected in this study and water quality parameters. However, geospatial data allowed further subdivision of several interior marsh clusters identified from the water quality data, potentially indicating zones with important differences in function. Identification of these zones can be useful to managers and modelers by informing the distribution of monitoring equipment and personnel as well as delineating regions that may respond similarly to future changes in management or climate.

Baseflow physical characteristics differ at multiple spatial scales in stream networks across diverse biomes

Treesearch

Janine Ruegg; Walter K. Dodds; Melinda D. Daniels; Ken R. Sheehan; Christina L. Baker; William B. Bowden; Kaitlin J. Farrell; Michael B. Flinn; Tamara K. Harms; Jeremy B. Jones; Lauren E. Koenig; John S. Kominoski; William H. McDowell; Samuel P. Parker; Amy D. Rosemond; Matt T. Trentman; Matt Whiles; Wilfred M. Wollheim

2016-01-01

ContextSpatial scaling of ecological processes is facilitated by quantifying underlying habitat attributes. Physical and ecological patterns are often measured at disparate spatial scales limiting our ability to quantify ecological processes at broader spatial scales using physical attributes.

Hybrid Modeling Approach to Estimate Exposures of Hazardous Air Pollutants (HAPs) for the National Air Toxics Assessment (NATA).

PubMed

Scheffe, Richard D; Strum, Madeleine; Phillips, Sharon B; Thurman, James; Eyth, Alison; Fudge, Steve; Morris, Mark; Palma, Ted; Cook, Richard

2016-11-15

A hybrid air quality model has been developed and applied to estimate annual concentrations of 40 hazardous air pollutants (HAPs) across the continental United States (CONUS) to support the 2011 calendar year National Air Toxics Assessment (NATA). By combining a chemical transport model (CTM) with a Gaussian dispersion model, both reactive and nonreactive HAPs are accommodated across local to regional spatial scales, through a multiplicative technique designed to improve mass conservation relative to previous additive methods. The broad scope of multiple pollutants capturing regional to local spatial scale patterns across a vast spatial domain is precedent setting within the air toxics community. The hybrid design exhibits improved performance relative to the stand alone CTM and dispersion model. However, model performance varies widely across pollutant categories and quantifiably definitive performance assessments are hampered by a limited observation base and challenged by the multiple physical and chemical attributes of HAPs. Formaldehyde and acetaldehyde are the dominant HAP concentration and cancer risk drivers, characterized by strong regional signals associated with naturally emitted carbonyl precursors enhanced in urban transport corridors with strong mobile source sector emissions. The multiple pollutant emission characteristics of combustion dominated source sectors creates largely similar concentration patterns across the majority of HAPs. However, reactive carbonyls exhibit significantly less spatial variability relative to nonreactive HAPs across the CONUS.

The Art of Athlete Leadership: Identifying High-Quality Athlete Leadership at the Individual and Team Level Through Social Network Analysis.

PubMed

Fransen, Katrien; Van Puyenbroeck, Stef; Loughead, Todd M; Vanbeselaere, Norbert; De Cuyper, Bert; Vande Broek, Gert; Boen, Filip

2015-06-01

This research aimed to introduce social network analysis as a novel technique in sports teams to identify the attributes of high-quality athlete leadership, both at the individual and at the team level. Study 1 included 25 sports teams (N = 308 athletes) and focused on athletes' general leadership quality. Study 2 comprised 21 sports teams (N = 267 athletes) and focused on athletes' specific leadership quality as a task, motivational, social, and external leader. The extent to which athletes felt connected with their leader proved to be most predictive for athletes' perceptions of that leader's quality on each leadership role. Also at the team level, teams with higher athlete leadership quality were more strongly connected. We conclude that social network analysis constitutes a valuable tool to provide more insight in the attributes of high-quality leadership both at the individual and at the team level.

Towards a model for the measurement of data quality in websites

NASA Astrophysics Data System (ADS)

Leite, Patrícia; Gonçalves, Joaquim; Teixeira, Paulo; Rocha, Álvaro

2014-10-01

Websites are, nowadays, the face of institutions, but they are often neglected, especially when it comes to contents. In the present paper, we put forth an investigation work whose final goal is the development of a model for the measurement of data quality in institutional websites for health units. To that end, we have carried out a bibliographic review of the available approaches for the evaluation of website content quality, in order to identify the most recurrent dimensions and the attributes, and we are currently carrying out a Delphi Method process, presently in its second stage, with the purpose of reaching an adequate set of attributes for the measurement of content quality.

Lean leadership attributes: a systematic review of the literature.

PubMed

Aij, Kjeld Harald; Teunissen, Maurits

2017-10-09

Purpose Emphasis on quality and reducing costs has led many health-care organizations to reconfigure their management, process, and quality control infrastructures. Many are lean, a management philosophy with roots in manufacturing industries that emphasizes elimination of waste. Successful lean implementation requires systemic change and strong leadership. Despite the importance of leadership to successful lean implementation, few researchers have probed the question of ideal leadership attributes to achieve lean thinking in health care. The purpose of this paper is to provide insight into applicable attributes for lean leaders in health care. Design/methodology/approach The authors systematically reviewed the literature on principles of leadership and, using Dombrowski and Mielke's (2013) conceptual model of lean leadership, developed a parallel theoretical model for lean leadership in health care. Findings This work contributes to the development of a new framework for describing leadership attributes within lean management of health care. Originality/value The summary of attributes can provide a model for health-care leaders to apply lean in their organizations.

Examining extrinsic factors that influence product acceptance: a review.

PubMed

Li, X E; Jervis, S M; Drake, M A

2015-05-01

Drivers of liking (DOL) studies are useful for product development to formulate acceptable products; however, DOL alone are insufficient for understanding why a product is purchased and repurchased, which is ultimately the indication of a successful product. Ultimately sensory attributes drive product success (that is, repeat and continued purchase). However, ignoring the importance of extrinsic factors may neglect the vital product attributes responsible for the initial purchase, which may in turn, affect repeat purchase. The perception of sensory attributes assessed by DOL is mitigated by external perceptions of quality. If the sensory attributes do not deliver based upon the quality cues, the product will not be acceptable. Four key extrinsic factors that affect DOL are the perceived satiety, brand and labeling, price, and the emotional impact to decision making. In order to more thoroughly understand what the DOL for a product is, these 4 product cues should be considered in conjunction with sensory attribute perception to gain a holistic understanding of product acceptance. © 2015 Institute of Food Technologists®

Supplementary effects of higher levels of various disaccharides on processing yield, quality properties and sensory attributes of Chinese - style pork jerky.

PubMed

Chen, Chih-Ming; Lin, Hsien-Tang

2017-12-01

This study evaluated the supplementary effect of higher concentrations of various disaccharides on processing yield, major physicochemical properties, and sensory attributes of Chinese-style pork jerky (CSPJ). CSPJ samples were prepared by marinating sliced ham (4 mm) with three dissaccharides, including sucrose, lactose, and maltose, at 0%, 15%, 18%, 21%, and 24%. Subsequently, the CSPJ samples were dried and roasted. The moisture content, water activity, crude protein, moisture-to-protein ratio, pH, processing yield, shear force, color, and sensory attributes of the CSPJ samples were evaluated. The quality characteristics of CSPJ samples prepared with sucrose were more acceptable. By contrast, CSPJ samples prepared with lactose showed the lowest scores. However, the processing yield and moisture content were the highest for CSPJ samples prepared with lactose, which may be associated with improved benefits for cost reduction. Furthermore, sucrose and lactose supplementation resulted in contrasting quality characteristics; for example, CSPJ samples with sucrose and maltose supplementation had higher sensory scores for color than samples with lactose supplementation. Additionally, most quality characteristics of CSPJ samples with sucrose supplementation contrasted with those of the samples with lactose supplementation; for example, the samples with sucrose supplementation had higher scores for sensory attributes than those with lactose supplementation. Sucrose supplementation up to 21% to 24% was associated with the highest overall acceptability scores (5.19 to 5.80), enhanced quality characteristics, increased processing yield, and reduced production cost.

Performance Effects of Measurement and Analysis: Perspectives from CMMI High Maturity Organizations and Appraisers

DTIC Science & Technology

2010-06-01

models 13 The Chi-Square test fails to reject the null hypothesis that there is no difference between 2008 and 2009 data (p-value = 0.601). This...attributed to process performance modeling 53 Table 4: Relationships between data quality and integrity activities and overall value attributed to... data quality and integrity; staffing and resources devoted to the work; pertinent training and coaching; and the alignment of the models with

Pharmaceutical quality by design: product and process development, understanding, and control.

PubMed

Yu, Lawrence X

2008-04-01

The purpose of this paper is to discuss the pharmaceutical Quality by Design (QbD) and describe how it can be used to ensure pharmaceutical quality. The QbD was described and some of its elements identified. Process parameters and quality attributes were identified for each unit operation during manufacture of solid oral dosage forms. The use of QbD was contrasted with the evaluation of product quality by testing alone. The QbD is a systemic approach to pharmaceutical development. It means designing and developing formulations and manufacturing processes to ensure predefined product quality. Some of the QbD elements include: Defining target product quality profile; Designing product and manufacturing processes; Identifying critical quality attributes, process parameters, and sources of variability; Controlling manufacturing processes to produce consistent quality over time. Using QbD, pharmaceutical quality is assured by understanding and controlling formulation and manufacturing variables. Product testing confirms the product quality. Implementation of QbD will enable transformation of the chemistry, manufacturing, and controls (CMC) review of abbreviated new drug applications (ANDAs) into a science-based pharmaceutical quality assessment.

Multiattribute selection of acute stroke imaging software platform for Extending the Time for Thrombolysis in Emergency Neurological Deficits (EXTEND) clinical trial.

PubMed

Churilov, Leonid; Liu, Daniel; Ma, Henry; Christensen, Soren; Nagakane, Yoshinari; Campbell, Bruce; Parsons, Mark W; Levi, Christopher R; Davis, Stephen M; Donnan, Geoffrey A

2013-04-01

The appropriateness of a software platform for rapid MRI assessment of the amount of salvageable brain tissue after stroke is critical for both the validity of the Extending the Time for Thrombolysis in Emergency Neurological Deficits (EXTEND) Clinical Trial of stroke thrombolysis beyond 4.5 hours and for stroke patient care outcomes. The objective of this research is to develop and implement a methodology for selecting the acute stroke imaging software platform most appropriate for the setting of a multi-centre clinical trial. A multi-disciplinary decision making panel formulated the set of preferentially independent evaluation attributes. Alternative Multi-Attribute Value Measurement methods were used to identify the best imaging software platform followed by sensitivity analysis to ensure the validity and robustness of the proposed solution. Four alternative imaging software platforms were identified. RApid processing of PerfusIon and Diffusion (RAPID) software was selected as the most appropriate for the needs of the EXTEND trial. A theoretically grounded generic multi-attribute selection methodology for imaging software was developed and implemented. The developed methodology assured both a high quality decision outcome and a rational and transparent decision process. This development contributes to stroke literature in the area of comprehensive evaluation of MRI clinical software. At the time of evaluation, RAPID software presented the most appropriate imaging software platform for use in the EXTEND clinical trial. The proposed multi-attribute imaging software evaluation methodology is based on sound theoretical foundations of multiple criteria decision analysis and can be successfully used for choosing the most appropriate imaging software while ensuring both robust decision process and outcomes. © 2012 The Authors. International Journal of Stroke © 2012 World Stroke Organization.

Multiple Learning Tracks: For Training Multinational Managers

ERIC Educational Resources Information Center

Harvey, Michael G.; Kerin, Roger A.

1977-01-01

The problem of identifying and training college students to be effective multinational marketing managers is investigated in three parts: (1) Identification of multinational manager attributes, (2) selection of multinational managers, and (3) multiple "track" training programs. (TA)

Quality of medicines commonly used in the treatment of soil transmitted helminths and giardia in ethiopia: a nationwide survey.

PubMed

Suleman, Sultan; Zeleke, Gemechu; Deti, Habtewold; Mekonnen, Zeleke; Duchateau, Luc; Levecke, Bruno; Vercruysse, Jozef; D'Hondt, Matthias; Wynendaele, Evelien; De Spiegeleer, Bart

2014-12-01

The presence of poor quality medicines in the market is a global threat on public health, especially in developing countries. Therefore, we assessed the quality of two commonly used anthelminthic drugs [mebendazole (MEB) and albendazole (ALB)] and one antiprotozoal drug [tinidazole (TNZ)] in Ethiopia. A multilevel stratified random sampling, with as strata the different levels of supply chain system in Ethiopia, geographic areas and government/privately owned medicines outlets, was used to collect the drug samples using mystery shoppers. The three drugs (106 samples) were collected from 38 drug outlets (government/privately owned) in 7 major cities in Ethiopia between January and March 2012. All samples underwent visual and physical inspection for labeling and packaging before physico-chemical quality testing and evaluated based on individual monographs in Pharmacopoeias for identification, assay/content, dosage uniformity, dissolution, disintegration and friability. In addition, quality risk was analyzed using failure mode effect analysis (FMEA) and a risk priority number (RPN) was assigned to each quality attribute. A clinically rationalized desirability function was applied in quantification of the overall quality of each medicine. Overall, 45.3% (48/106) of the tested samples were substandard, i.e. not meeting the pharmacopoeial quality specifications claimed by their manufacturers. Assay was the quality attribute most often out-of-specification, with 29.2% (31/106) failure of the total samples. The highest failure was observed for MEB (19/42, 45.2%), followed by TNZ (10/39, 25.6%) and ALB (2/25, 8.0%). The risk analysis showed that assay (RPN = 512) is the most critical quality attribute, followed by dissolution (RPN = 336). Based on Derringer's desirability function, samples were classified into excellent (14/106,13%), good (24/106, 23%), acceptable (38/106, 36%%), low (29/106, 27%) and bad (1/106,1%) quality. This study evidenced that there is a relatively high prevalence of poor quality MEB, ALB and TNZ in Ethiopia: up to 45% if pharmacopoeial acceptance criteria are used in the traditional, dichotomous approach, and 28% if the new risk-based desirability approach was applied. The study identified assay as the most critical quality attributes. The country of origin was the most significant factor determining poor quality status of the investigated medicines in Ethiopia.

Quality of Medicines Commonly Used in the Treatment of Soil Transmitted Helminths and Giardia in Ethiopia: A Nationwide Survey

PubMed Central

Suleman, Sultan; Zeleke, Gemechu; Deti, Habtewold; Mekonnen, Zeleke; Duchateau, Luc; Levecke, Bruno; Vercruysse, Jozef; D'Hondt, Matthias; Wynendaele, Evelien; De Spiegeleer, Bart

2014-01-01

Background The presence of poor quality medicines in the market is a global threat on public health, especially in developing countries. Therefore, we assessed the quality of two commonly used anthelminthic drugs [mebendazole (MEB) and albendazole (ALB)] and one antiprotozoal drug [tinidazole (TNZ)] in Ethiopia. Methods/Principal Findings A multilevel stratified random sampling, with as strata the different levels of supply chain system in Ethiopia, geographic areas and government/privately owned medicines outlets, was used to collect the drug samples using mystery shoppers. The three drugs (106 samples) were collected from 38 drug outlets (government/privately owned) in 7 major cities in Ethiopia between January and March 2012. All samples underwent visual and physical inspection for labeling and packaging before physico-chemical quality testing and evaluated based on individual monographs in Pharmacopoeias for identification, assay/content, dosage uniformity, dissolution, disintegration and friability. In addition, quality risk was analyzed using failure mode effect analysis (FMEA) and a risk priority number (RPN) was assigned to each quality attribute. A clinically rationalized desirability function was applied in quantification of the overall quality of each medicine. Overall, 45.3% (48/106) of the tested samples were substandard, i.e. not meeting the pharmacopoeial quality specifications claimed by their manufacturers. Assay was the quality attribute most often out-of-specification, with 29.2% (31/106) failure of the total samples. The highest failure was observed for MEB (19/42, 45.2%), followed by TNZ (10/39, 25.6%) and ALB (2/25, 8.0%). The risk analysis showed that assay (RPN = 512) is the most critical quality attribute, followed by dissolution (RPN = 336). Based on Derringer's desirability function, samples were classified into excellent (14/106,13%), good (24/106, 23%), acceptable (38/106, 36%%), low (29/106, 27%) and bad (1/106,1%) quality. Conclusions/Significance This study evidenced that there is a relatively high prevalence of poor quality MEB, ALB and TNZ in Ethiopia: up to 45% if pharmacopoeial acceptance criteria are used in the traditional, dichotomous approach, and 28% if the new risk-based desirability approach was applied. The study identified assay as the most critical quality attributes. The country of origin was the most significant factor determining poor quality status of the investigated medicines in Ethiopia. PMID:25473966

Novel Wireless-Communicating Textiles Made from Multi-Material and Minimally-Invasive Fibers

PubMed Central

Gorgutsa, Stepan; Bélanger-Garnier, Victor; Ung, Bora; Viens, Jeff; Gosselin, Benoit; LaRochelle, Sophie; Messaddeq, Younes

2014-01-01

The ability to integrate multiple materials into miniaturized fiber structures enables the realization of novel biomedical textile devices with higher-level functionalities and minimally-invasive attributes. In this work, we present novel textile fabrics integrating unobtrusive multi-material fibers that communicate through 2.4 GHz wireless networks with excellent signal quality. The conductor elements of the textiles are embedded within the fibers themselves, providing electrical and chemical shielding against the environment, while preserving the mechanical and cosmetic properties of the garments. These multi-material fibers combine insulating and conducting materials into a well-defined geometry, and represent a cost-effective and minimally-invasive approach to sensor fabrics and bio-sensing textiles connected in real time to mobile communications infrastructures, suitable for a variety of health and life science applications. PMID:25325335

Novel wireless-communicating textiles made from multi-material and minimally-invasive fibers.

PubMed

Bélanger-Garnier, Victor; Gorgutsa, Stephan; Ung, Bora; Viens, Jeff; Gosselin, Benoit; LaRochelle, Sophie; Messaddeq, Younes

2014-01-01

The ability to integrate multiple materials into miniaturized fiber structures enables the realization of novel biomedical textile devices with higher-level functionalities and minimally-invasive attributes. In this work, we present novel textile fabrics integrating unobtrusive multi-material fibers that communicate through 2.4 GHz wireless networks with excellent signal quality. The conductor elements of the textiles are embedded within the fibers themselves, providing electrical and chemical shielding against the environment, while preserving the mechanical and cosmetic properties of the garments. These multi-material fibers combine insulating and conducting materials into a well-defined geometry, and represent a cost-effective and minimally-invasive approach to sensor fabrics and bio-sensing textiles connected in real time to mobile communications infrastructures, suitable for a variety of health and life science applications.

Novel wireless-communicating textiles made from multi-material and minimally-invasive fibers.

PubMed

Gorgutsa, Stepan; Bélanger-Garnier, Victor; Ung, Bora; Viens, Jeff; Gosselin, Benoit; LaRochelle, Sophie; Messaddeq, Younes

2014-10-16

The ability to integrate multiple materials into miniaturized fiber structures enables the realization of novel biomedical textile devices with higher-level functionalities and minimally-invasive attributes. In this work, we present novel textile fabrics integrating unobtrusive multi-material fibers that communicate through 2.4 GHz wireless networks with excellent signal quality. The conductor elements of the textiles are embedded within the fibers themselves, providing electrical and chemical shielding against the environment, while preserving the mechanical and cosmetic properties of the garments. These multi-material fibers combine insulating and conducting materials into a well-defined geometry, and represent a cost-effective and minimally-invasive approach to sensor fabrics and bio-sensing textiles connected in real time to mobile communications infrastructures, suitable for a variety of health and life science applications.

Xerostomia in the Geriatric Patient: Causes, Oral Manifestations, and Treatment.

PubMed

Ouanounou, Aviv

2016-05-01

Xerostomia, or dry mouth, is common among elderly people and is typically associated with decreased salivary gland function. Causes of xerostomia in the geriatric population have been attributed to the use of medications, chronic disorders, and radiation therapy to the head and neck region. Patients with chronic xerostomia may have multiple oral and dental consequences such as dental caries, periodontal disease, fungal infections, ill-fitting dentures, and taste alterations. Xerostomia can seriously impact quality of life and may alter speech, eating, and swallowing. Current therapeutics for the management of xerostomia are grouped as local and systemic salivary stimulation. This article reviews the main reasons for xerostomia and the complications it causes in the oral cavity. It also discusses the pharmacologic and nonpharmacologic agents used to treat this condition.

7 CFR 29.2601 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2601 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2351 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2351 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2601 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2601 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2601 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2601 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2351 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2351 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2351 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2351 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2351 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2351 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2601 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2601 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

Exemplary Chinese University Professors: Qualities and Impact on Students

ERIC Educational Resources Information Center

Kim, Eugene P.; Olson, Mathias

2016-01-01

This study focuses on the qualities of Chinese university professors as perceived by their students and the effects of those qualities on student learning and motivation. Specifically, what qualities and personal characteristics do Chinese university students attribute to their favorite and least favorite professors, and how do those qualities and…

On the Equivalence of Constructed-Response and Multiple-Choice Tests.

ERIC Educational Resources Information Center

Traub, Ross E.; Fisher, Charles W.

Two sets of mathematical reasoning and two sets of verbal comprehension items were cast into each of three formats--constructed response, standard multiple-choice, and Coombs multiple-choice--in order to assess whether tests with indentical content but different formats measure the same attribute, except for possible differences in error variance…

Analysis of Ground-Water Levels and Associated Trends in Yucca Flat, Nevada Test Site, Nye County, Nevada, 1951-2003

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.M. Fenelon

2005-10-05

Almost 4,000 water-level measurements in 216 wells in the Yucca Flat area from 1951 to 2003 were quality assured and analyzed. An interpretative database was developed that describes water-level conditions for each water level measured in Yucca Flat. Multiple attributes were assigned to each water-level measurement in the database to describe the hydrologic conditions at the time of measurement. General quality, temporal variability, regional significance, and hydrologic conditions are attributed for each water-level measurement. The database also includes narratives that discuss the water-level history of each well. Water levels in 34 wells were analyzed for variability and for statistically significantmore » trends. An attempt was made to identify the cause of many of the water-level fluctuations or trends. Potential causes include equilibration following well construction or development, pumping in the monitoring well, withdrawals from a nearby supply well, recharge from precipitation, earthquakes, underground nuclear tests, land subsidence, barometric pressure, and Earth tides. Some of the naturally occurring fluctuations in water levels may result from variations in recharge. The magnitude of the overall water-level change for these fluctuations generally is less than 2 feet. Long-term steady-state hydrographs for most of the wells open to carbonate rock have a very similar pattern. Carbonate-rock wells without the characteristic pattern are directly west of the Yucca and Topgallant faults in the southwestern part of Yucca Flat. Long-term steady-state hydrographs from wells open to volcanic tuffs or the Eleana confining unit have a distinctly different pattern from the general water-level pattern of the carbonate-rock aquifers. Anthropogenic water-level fluctuations were caused primarily by water withdrawals and nuclear testing. Nuclear tests affected water levels in many wells. Trends in these wells are attributed to test-cavity infilling or the effects of depressurization following nuclear testing. The magnitude of the overall water-level change for wells with anthropogenic trends can be large, ranging from several feet to hundreds of feet. Vertical water-level differences at 27 sites in Yucca Flat with multiple open intervals were compared. Large vertical differences were noted in volcanic rocks and in boreholes where water levels were affected by nuclear tests. Small vertical differences were noted within the carbonate-rock and valley-fill aquifers. Vertical hydraulic gradients generally are downward in volcanic rocks and from pre-Tertiary clastic rocks toward volcanic- or carbonate-rock units.« less

Analysis of ground-water levels and associated trends in Yucca Flat, Nevada Test Site, Nye County, Nevada, 1951-2003

USGS Publications Warehouse

Fenelon, Joseph M.

2005-01-01

Almost 4,000 water-level measurements in 216 wells in the Yucca Flat area from 1951 to 2003 were quality assured and analyzed. An interpretative database was developed that describes water-level conditions for each water level measured in Yucca Flat. Multiple attributes were assigned to each water-level measurement in the database to describe the hydrologic conditions at the time of measurement. General quality, temporal variability, regional significance, and hydrologic conditions are attributed for each water-level measurement. The database also includes narratives that discuss the water-level history of each well. Water levels in 34 wells were analyzed for variability and for statistically significant trends. An attempt was made to identify the cause of many of the water-level fluctuations or trends. Potential causes include equilibration following well construction or development, pumping in the monitoring well, withdrawals from a nearby supply well, recharge from precipitation, earthquakes, underground nuclear tests, land subsidence, barometric pressure, and Earth tides. Some of the naturally occurring fluctuations in water levels may result from variations in recharge. The magnitude of the overall water-level change for these fluctuations generally is less than 2 feet. Long-term steady-state hydrographs for most of the wells open to carbonate rock have a very similar pattern. Carbonate-rock wells without the characteristic pattern are directly west of the Yucca and Topgallant faults in the southwestern part of Yucca Flat. Long-term steady-state hydrographs from wells open to volcanic tuffs or the Eleana confining unit have a distinctly different pattern from the general water-level pattern of the carbonate-rock aquifers. Anthropogenic water-level fluctuations were caused primarily by water withdrawals and nuclear testing. Nuclear tests affected water levels in many wells. Trends in these wells are attributed to test-cavity infilling or the effects of depressurization following nuclear testing. The magnitude of the overall water-level change for wells with anthropogenic trends can be large, ranging from several feet to hundreds of feet. Vertical water-level differences at 27 sites in Yucca Flat with multiple open intervals were compared. Large vertical differences were noted in volcanic rocks and in boreholes where water levels were affected by nuclear tests. Small vertical differences were noted within the carbonate-rock and valley-fill aquifers. Vertical hydraulic gradients generally are downward in volcanic rocks and from pre-Tertiary clastic rocks toward volcanic- or carbonate-rock units.

Sleep quality, posttraumatic stress, depression, and human errors in train drivers: a population-based nationwide study in South Korea.

PubMed

Jeon, Hong Jin; Kim, Ji-Hae; Kim, Bin-Na; Park, Seung Jin; Fava, Maurizio; Mischoulon, David; Kang, Eun-Ho; Roh, Sungwon; Lee, Dongsoo

2014-12-01

Human error is defined as an unintended error that is attributable to humans rather than machines, and that is important to avoid to prevent accidents. We aimed to investigate the association between sleep quality and human errors among train drivers. Cross-sectional. Population-based. A sample of 5,480 subjects who were actively working as train drivers were recruited in South Korea. The participants were 4,634 drivers who completed all questionnaires (response rate 84.6%). None. The Pittsburgh Sleep Quality Index (PSQI), the Center for Epidemiologic Studies Depression Scale (CES-D), the Impact of Event Scale-Revised (IES-R), the State-Trait Anxiety Inventory (STAI), and the Korean Occupational Stress Scale (KOSS). Of 4,634 train drivers, 349 (7.5%) showed more than one human error per 5 y. Human errors were associated with poor sleep quality, higher PSQI total scores, short sleep duration at night, and longer sleep latency. Among train drivers with poor sleep quality, those who experienced severe posttraumatic stress showed a significantly higher number of human errors than those without. Multiple logistic regression analysis showed that human errors were significantly associated with poor sleep quality and posttraumatic stress, whereas there were no significant associations with depression, trait and state anxiety, and work stress after adjusting for age, sex, education years, marital status, and career duration. Poor sleep quality was found to be associated with more human errors in train drivers, especially in those who experienced severe posttraumatic stress. © 2014 Associated Professional Sleep Societies, LLC.

Implementation of "Quality by Design (QbD)" Approach for the Development of 5-Fluorouracil Loaded Thermosensitive Hydrogel.

PubMed

Dalwadi, Chintan; Patel, Gayatri

2016-01-01

The purpose of this study was to investigate Quality by Design (QbD) principle for the preparation of hydrogel products to prove both practicability and utility of executing QbD concept to hydrogel based controlled release systems. Product and process understanding will help in decreasing the variability of critical material and process parameters, which give quality product output and reduce the risk. This study includes the identification of the Quality Target Product Profiles (QTPPs) and Critical Quality Attributes (CQAs) from literature or preliminary studies. To identify and control the variability in process and material attributes, two tools of QbD was utilized, Quality Risk Management (QRM) and Experimental Design. Further, it helps to identify the effect of these attributes on CQAs. Potential risk factors were identified from fishbone diagram and screened by risk assessment and optimized by 3-level 2- factor experimental design with center points in triplicate, to analyze the precision of the target process. This optimized formulation was further characterized by gelling time, gelling temperature, rheological parameters, in-vitro biodegradation and in-vitro drug release. Design space was created using experimental design tool that gives the control space and working within this controlled space reduces all the failure modes below the risk level. In conclusion, QbD approach with QRM tool provides potent and effectual pyramid to enhance the quality into the hydrogel.

Nondestructive detection of pork quality based on dual-band VIS/NIR spectroscopy

NASA Astrophysics Data System (ADS)

Wang, Wenxiu; Peng, Yankun; Li, Yongyu; Tang, Xiuying; Liu, Yuanyuan

2015-05-01

With the continuous development of living standards and the relative change of dietary structure, consumers' rising and persistent demand for better quality of meat is emphasized. Colour, pH value, and cooking loss are important quality attributes when evaluating meat. To realize nondestructive detection of multi-parameter of meat quality simultaneously is popular in production and processing of meat and meat products. The objectives of this research were to compare the effectiveness of two bands for rapid nondestructive and simultaneous detection of pork quality attributes. Reflectance spectra of 60 chilled pork samples were collected from a dual-band visible/near-infrared spectroscopy system which covered 350-1100 nm and 1000-2600 nm. Then colour, pH value and cooking loss were determined by standard methods as reference values. Standard normal variables transform (SNVT) was employed to eliminate the spectral noise. A spectrum connection method was put forward for effective integration of the dual-band spectrum to make full use of the whole efficient information. Partial least squares regression (PLSR) and Principal component analysis (PCA) were applied to establish prediction models using based on single-band spectrum and dual-band spectrum, respectively. The experimental results showed that the PLSR model based on dual-band spectral information was superior to the models based on single band spectral information with lower root means quare error (RMSE) and higher accuracy. The PLSR model based on dual-band (use the overlapping part of first band) yielded the best prediction result with correlation coefficient of validation (Rv) of 0.9469, 0.9495, 0.9180, 0.9054 and 0.8789 for L*, a*, b*, pH value and cooking loss, respectively. This mainly because dual-band spectrum can provide sufficient and comprehensive information which reflected the quality attributes. Data fusion from dual-band spectrum could significantly improve pork quality parameters prediction performance. The research also indicated that multi-band spectral information fusion has potential to comprehensively evaluate other quality and safety attributes of pork.

A quality by design approach to investigate the effect of mannitol and dicalcium phosphate qualities on roll compaction.

PubMed

Souihi, Nabil; Dumarey, Melanie; Wikström, Håkan; Tajarobi, Pirjo; Fransson, Magnus; Svensson, Olof; Josefson, Mats; Trygg, Johan

2013-04-15

Roll compaction is a continuous process for solid dosage form manufacturing increasingly popular within pharmaceutical industry. Although roll compaction has become an established technique for dry granulation, the influence of material properties is still not fully understood. In this study, a quality by design (QbD) approach was utilized, not only to understand the influence of different qualities of mannitol and dicalcium phosphate (DCP), but also to predict critical quality attributes of the drug product based solely on the material properties of that filler. By describing each filler quality in terms of several representative physical properties, orthogonal projections to latent structures (OPLS) was used to understand and predict how those properties affected drug product intermediates as well as critical quality attributes of the final drug product. These models were then validated by predicting product attributes for filler qualities not used in the model construction. The results of this study confirmed that the tensile strength reduction, known to affect plastic materials when roll compacted, is not prominent when using brittle materials. Some qualities of these fillers actually demonstrated improved compactability following roll compaction. While direct compression qualities are frequently used for roll compacted drug products because of their excellent flowability and good compaction properties, this study revealed that granules from these qualities were more poor flowing than the corresponding powder blends, which was not seen for granules from traditional qualities. The QbD approach used in this study could be extended beyond fillers. Thus any new compound/ingredient would first be characterized and then suitable formulation characteristics could be determined in silico, without running any additional experiments. Copyright © 2013 Elsevier B.V. All rights reserved.

Developmental Precursors of Young School-Age Children's Hostile Attribution Bias

ERIC Educational Resources Information Center

Choe, Daniel Ewon; Lane, Jonathan D.; Grabell, Adam S.; Olson, Sheryl L.

2013-01-01

This prospective longitudinal study provides evidence of preschool-age precursors of hostile attribution bias in young school-age children, a topic that has received little empirical attention. We examined multiple risk domains, including laboratory and observational assessments of children's social-cognition, general cognitive functioning,…

[Quality of life after multiple trauma].

PubMed

Mörsdorf, P; Becker, S C; Holstein, J H; Burkhardt, M; Pohlemann, T

2014-03-01

Multiple trauma is an independent injury pattern which, because of its complexity, is responsible for 25 % of the costs for the treatment of all injured patients. Because of the often long-lasting physical impairment and the high incidence of residual permanent handicaps, it is apparent that multiple trauma can lead to a reduction in patient quality of life. The aim of this study was to give an overview of the known data concerning the change in quality of life for multiple trauma patients. Furthermore, predictors for the reduction of quality of life after multiple trauma will be identified. A MedLine search was performed to identify studies dealing with the outcome after multiple trauma. In addition to functional outcome parameters, the term quality of life has become more important in recent years when it comes to evaluating the outcome following injury. While the mortality after multiple trauma could be significantly reduced over the years, there is no comparable effect on the quality of life. Predictors for a worse quality of life after multiple trauma are female gender, high age, low social status, concomitant head injuries and injury to the lower extremities. The fact that mortality after multiple trauma has decreased but not impairment of the quality of life makes it clear that in addition to the acute medical treatment, a follow-up treatment including not only physiotherapy but also psychotherapy is crucial for multiple trauma patients.

Primary packaging considerations in developing medicines for children: oral liquid and powder for constitution.

PubMed

Campbell, Gossett A; Vallejo, Erick

2015-01-01

The packaging presentation of oral liquid pediatric medicines is a critical step in maintaining chemical and physical stability, compliance, adherence, and proper handling by the target patient population, guardians, caregivers, and health-care professionals. The common packaging presentations for commercial oral liquid pediatric drug products are glass bottle, plastic bottle, sachet, and stick pack configurations. The type of pack presentation selected is driven by the quality target product profile (QTPP) that is designed around the physicochemical properties of the drug substance and the desired drug product suitability for the target population. The QTPP defines the intended use of the drug product, drug product quality criteria, dose strength, dosage form, container closure system, storage conditions, stability criteria, dosing device, shelf life, and attributes affecting the pharmacokinetic characteristics. Oral liquid pediatric formulations are typically prepared from a powder that is constituted at the time of use as a suspension or a solution for single or multiple use depending on the stability of the constituted formulation. Active ingredients with high aqueous solubility can be developed as a powder for oral solution and presented in a bottle for multiple use product and a stick pack, packet, or sachet for single-use product. Active ingredients with low aqueous solubility can be developed as a powder for oral suspension and presented in a bottle for multiple use product and a stick pack or sachet for single-use product. A secondary package may be used in cases where the primary pack failed to provide adequate protection against light degradation. This work will help formulation scientists select the most appropriate pack presentation in the early stages of pediatric clinical development. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Willingness to pay for improved respiratory and cardiovascular health: a multiple-format, stated-preference approach.

PubMed

Johnson, F R; Banzhaf, M R; Desvousges, W H

2000-06-01

This study uses stated-preference (SP) analysis to measure willingness to pay (WTP) to reduce acute episodes of respiratory and cardiovascular ill health. The SP survey employs a modified version of the health state descriptions used in the Quality of Well Being (QWB) Index. The four health state attributes are symptom, episode duration, activity restrictions and cost. Preferences are elicited using two different SP formats: graded-pair and discrete-choice. The different formats cause subjects to focus on different evaluation strategies. Combining two elicitation formats yields more valid and robust estimates than using only one approach. Estimates of indirect utility function parameters are obtained using advanced panel econometrics for each format separately and jointly. Socio-economic differences in health preferences are modelled by allowing the marginal utility of money relative to health attributes to vary across respondents. Because the joint model captures the combined preference information provided by both elicitation formats, these model estimates are used to calculate WTP. The results demonstrate the feasibility of estimating meaningful WTP values for policy-relevant respiratory and cardiac symptoms, even from subjects who never have personally experienced these conditions. Furthermore, because WTP estimates are for individual components of health improvements, estimates can be aggregated in various ways depending upon policy needs. Thus, using generic health attributes facilitates transferring WTP estimates for benefit-cost analysis of a variety of potential health interventions. Copyright 2000 John Wiley & Sons, Ltd.

Association of physicians' illness perception of fibromyalgia with frustration and resistance to accepting patients: a cross-sectional study.

PubMed

Homma, Mieko; Ishikawa, Hirono; Kiuchi, Takahiro

2016-04-01

The aim of this study was to elucidate whether physicians' illness perceptions correlate with their frustration or resistance to accepting patients with fibromyalgia (FM). In this cross-sectional postal survey, questionnaires were sent to member physicians of the Japan College of Rheumatology and Japan Rheumatism Foundation. Measures collected included the Brief Illness Perception Questionnaire with Causal Attribution, the Illness Invalidation Inventory, and the Difficult Doctor-Patient Relationship Questionnaire (DDPRQ-10). Multiple logistic regression was performed to examine associations between the DDPRQ-10 and resistance to accepting patients with FM for treatment. We analyzed data from 233 physicians who had experience in consulting with patients with FM. Only 44.2 % answered that they wanted to accept additional patients with FM. Physicians' frustration was associated with difficulty controlling symptoms, patients' emotional responses, and causal attribution of FM to patient internal factors. Conversely, lower levels of frustration were associated with causal attributions to biological factors and uncontrollable external factors. However, the "difficult patient" perception did not correlate with resistance to accepting patients with FM. Difficulty controlling symptoms with treatment was the one factor common to both physicians' frustration and resistance to accepting patients with FM. Physicians may hesitate to accept patients with FM not because of the stigmatic image of the "difficult patient," but instead because of the difficulty in controlling the symptoms of FM. Thus, to improve the quality of consultation, physicians must continuously receive new information about the treatments and causes of FM.

Response time modeling reveals multiple contextual cuing mechanisms.

PubMed

Sewell, David K; Colagiuri, Ben; Livesey, Evan J

2017-08-24

Contextual cuing refers to a response time (RT) benefit that occurs when observers search through displays that have been repeated over the course of an experiment. Although it is generally agreed that contextual cuing arises via an associative learning mechanism, there is uncertainty about the type(s) of process(es) that allow learning to influence RT. We contrast two leading accounts of the contextual cuing effect that differ in terms of the general process that is credited with producing the effect. The first, the expedited search account, attributes the cuing effect to an increase in the speed with which the target is acquired. The second, the decision threshold account, attributes the cuing effect to a reduction in the response threshold used by observers when making a subsequent decision about the target (e.g., judging its orientation). We use the diffusion model to contrast the quantitative predictions of these two accounts at the level of individual observers. Our use of the diffusion model allows us to also explore a novel decision-level locus of the cuing effect based on perceptual learning. This novel account attributes the RT benefit to a perceptual learning process that increases the quality of information used to drive the decision process. Our results reveal both individual differences in the process(es) involved in contextual cuing but also identify several striking regularities across observers. We find strong support for both the decision threshold account as well as the novel perceptual learning account. We find relatively weak support for the expedited search account.

Searchable attribute-based encryption scheme with attribute revocation in cloud storage.

PubMed

Wang, Shangping; Zhao, Duqiao; Zhang, Yaling

2017-01-01

Attribute based encryption (ABE) is a good way to achieve flexible and secure access control to data, and attribute revocation is the extension of the attribute-based encryption, and the keyword search is an indispensable part for cloud storage. The combination of both has an important application in the cloud storage. In this paper, we construct a searchable attribute-based encryption scheme with attribute revocation in cloud storage, the keyword search in our scheme is attribute based with access control, when the search succeeds, the cloud server returns the corresponding cipher text to user and the user can decrypt the cipher text definitely. Besides, our scheme supports multiple keywords search, which makes the scheme more practical. Under the assumption of decisional bilinear Diffie-Hellman exponent (q-BDHE) and decisional Diffie-Hellman (DDH) in the selective security model, we prove that our scheme is secure.

Max-margin multiattribute learning with low-rank constraint.

PubMed

Zhang, Qiang; Chen, Lin; Li, Baoxin

2014-07-01

Attribute learning has attracted a lot of interests in recent years for its advantage of being able to model high-level concepts with a compact set of midlevel attributes. Real-world objects often demand multiple attributes for effective modeling. Most existing methods learn attributes independently without explicitly considering their intrinsic relatedness. In this paper, we propose max margin multiattribute learning with low-rank constraint, which learns a set of attributes simultaneously, using only relative ranking of the attributes for the data. By learning all the attributes simultaneously through low-rank constraint, the proposed method is able to capture their intrinsic correlation for improved learning; by requiring only relative ranking, the method avoids restrictive binary labels of attributes that are often assumed by many existing techniques. The proposed method is evaluated on both synthetic data and real visual data including a challenging video data set. Experimental results demonstrate the effectiveness of the proposed method.

Organizational Attributes Associated With Medicare ACO Quality Performance.

PubMed

Zhu, Xi; Mueller, Keith; Huang, Huang; Ullrich, Fred; Vaughn, Thomas; MacKinney, A Clinton

2018-05-08

To evaluate associations between geographic, structural, and service-provision attributes of Accountable Care Organizations (ACOs) participating in the Medicare Shared Savings Program (MSSP) and the ACOs' quality performance. We conducted cross-sectional and longitudinal analyses of ACO quality performance using data from the Centers for Medicare and Medicaid Services and additional sources. The sample included 322 and 385 MSSP ACOs that had successfully reported quality measures in 2014 and 2015, respectively. Results show that after adjusting for other organizational factors, rural ACOs' average quality score was comparable to that of ACOs serving other geographic categories. ACOs with hospital-system sponsorship, larger beneficiary panels, and higher posthospitalization follow-up rates achieved better quality performance. There is no significant difference in average quality performance between rural ACOs and other ACOs after adjusting for structural and service-provision factors. MSSP ACO quality performance is positively associated with hospital-system sponsorship, beneficiary panel size, and posthospitalization follow-up rate. © 2018 National Rural Health Association.

Multiplicity Counting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geist, William H.

2015-12-01

This set of slides begins by giving background and a review of neutron counting; three attributes of a verification item are discussed: 240Pu eff mass; α, the ratio of (α,n) neutrons to spontaneous fission neutrons; and leakage multiplication. It then takes up neutron detector systems – theory & concepts (coincidence counting, moderation, die-away time); detector systems – some important details (deadtime, corrections); introduction to multiplicity counting; multiplicity electronics and example distributions; singles, doubles, and triples from measured multiplicity distributions; and the point model: multiplicity mathematics.

Changes in sensory quality characteristics of coffee during storage

PubMed Central

Kreuml, Michaela T L; Majchrzak, Dorota; Ploederl, Bettina; Koenig, Juergen

2013-01-01

How long can roasted coffee beans be stored, without reducing the typical coffee flavor which is mainly responsible for consumers’ enjoyment? In Austria, most coffee packages have a best-before date between 12 and 24 months, but it is not regulated by law. Therefore, there is the need to evaluate changes in sensory qualities of coffee beverages prepared from stored coffee beans. For preparation of the coffee beverages, the paper filter method was used. In the quantitative descriptive analysis (QDA) 10 trained assessors evaluated the intensity of 30 coffee attributes after roasting at the 9th and 18th month of storage, respectively. The sensory evaluation results showed reduction in the sensory qualities of coffee beverages after 9 months storage of roasted coffee beans. The positive associated odor and flavor attributes decreased in their intensity, whereas the negative associated odor and flavor attributes increased significantly (P < 0.05). After 18 months of storage, the rancid odor and flavor which indicate oxidation processes were even considerably perceivable. Consequently, we can assume that changes in sensory quality characteristics of roasted and vacuum-packed coffee beans during storage are possible. PMID:24804030

On the quality of commercial boneless skinless broiler breast meat.

PubMed

Lee, Y S; Owens, C M; Meullenet, J F

2008-08-01

This study was conducted to assess the overall quality of commercial broiler breast meat products representing several brands and various industry practices (that is, chilling or enhancement procedures). Six different broiler breast products were evaluated by 75 consumers for 11 attributes related to appearance, flavor, tenderness, and juiciness, including overall acceptance. Twenty-three sensory attributes representing basic taste, flavor, texture, and appearance were evaluated by 11 trained descriptive panelists. Tenderness of cooked meat was instrumentally predicted by the Meullenet-Owens razor shear (MORS). Water holding capacity (cook loss) of cooked meat was also evaluated, and color and pH of raw meat were determined. Significant variations in quality among products tested were reported, indicating a broad range of product quality in the marketplace. One air-chilled and 1 water-chilled/enhanced product were found to be most liked by consumers. Tenderness of products tested was rated in average between "neither tough nor tender" and "very tender" by consumers. Cook loss of the 2 air-chilled products (13.5% to 19.1%, respectively) was significantly lower than that of water-chilled products (18.7% to 24.1%). Partial least squares regression revealed that 4 sensory texture attributes (hardness, hardness of mass, cohesiveness of mass, and tooth pack) and 1 basic taste (sour) were the major attributes driving consumer overall liking of commercial broiler breast meat products.

Impacts on quality of life related to dental caries in a national representative sample of Thai 12- and 15-year-olds.

PubMed

Krisdapong, S; Prasertsom, P; Rattanarangsima, K; Sheiham, A

2013-01-01

Dental caries is generally given the highest priority in national oral health services for school-aged populations. Yet, there is no study exploring the impacts on quality of life specifically related to dental caries in national samples of school-aged children. This study assessed prevalence and characteristics of oral impacts attributed to dental caries on quality of life and compared them with overall oral health impacts. In addition, associations of oral impacts attributed to dental caries and dental caries status were investigated. A national representative sample of 1,063 12- and 811 15-year-olds completed a sociodemographic and behavioural questionnaire, and were orally examined and interviewed about oral health-related quality of life using the Child-OIDP or OIDP indexes, respectively. Associations of condition-specific impacts (CS impacts) attributed to dental caries with components of DMF were investigated using χ(2) tests and multivariate logistic regressions. CS impacts attributed to dental caries were reported by nearly half the children and such impacts accounted for half of overall oral impacts from all oral conditions. The majority of impacts were of little intensity and affected only 1-2 daily performances, particularly performances on Eating, Emotional stability and Cleaning teeth. CS impacts were significantly positively associated with number of decayed teeth, and strongly associated with severe decay. Copyright © 2012 S. Karger AG, Basel.

The combined effect of wet granulation process parameters and dried granule moisture content on tablet quality attributes.

PubMed

Gabbott, Ian P; Al Husban, Farhan; Reynolds, Gavin K

2016-09-01

A pharmaceutical compound was used to study the effect of batch wet granulation process parameters in combination with the residual moisture content remaining after drying on granule and tablet quality attributes. The effect of three batch wet granulation process parameters was evaluated using a multivariate experimental design, with a novel constrained design space. Batches were characterised for moisture content, granule density, crushing strength, porosity, disintegration time and dissolution. Mechanisms of the effect of the process parameters on the granule and tablet quality attributes are proposed. Water quantity added during granulation showed a significant effect on granule density and tablet dissolution rate. Mixing time showed a significant effect on tablet crushing strength, and mixing speed showed a significant effect on the distribution of tablet crushing strengths obtained. The residual moisture content remaining after granule drying showed a significant effect on tablet crushing strength. The effect of moisture on tablet tensile strength has been reported before, but not in combination with granulation parameters and granule properties, and the impact on tablet dissolution was not assessed. Correlations between the energy input during granulation, the density of granules produced, and the quality attributes of the final tablets were also identified. Understanding the impact of the granulation and drying process parameters on granule and tablet properties provides a basis for process optimisation and scaling. Copyright © 2016 Elsevier B.V. All rights reserved.

Simultaneous colour visualizations of multiple ALS point cloud attributes for land cover and vegetation analysis

NASA Astrophysics Data System (ADS)

Zlinszky, András; Schroiff, Anke; Otepka, Johannes; Mandlburger, Gottfried; Pfeifer, Norbert

2014-05-01

LIDAR point clouds hold valuable information for land cover and vegetation analysis, not only in the spatial distribution of the points but also in their various attributes. However, LIDAR point clouds are rarely used for visual interpretation, since for most users, the point cloud is difficult to interpret compared to passive optical imagery. Meanwhile, point cloud viewing software is available allowing interactive 3D interpretation, but typically only one attribute at a time. This results in a large number of points with the same colour, crowding the scene and often obscuring detail. We developed a scheme for mapping information from multiple LIDAR point attributes to the Red, Green, and Blue channels of a widely used LIDAR data format, which are otherwise mostly used to add information from imagery to create "photorealistic" point clouds. The possible combinations of parameters are therefore represented in a wide range of colours, but relative differences in individual parameter values of points can be well understood. The visualization was implemented in OPALS software, using a simple and robust batch script, and is viewer independent since the information is stored in the point cloud data file itself. In our case, the following colour channel assignment delivered best results: Echo amplitude in the Red, echo width in the Green and normalized height above a Digital Terrain Model in the Blue channel. With correct parameter scaling (but completely without point classification), points belonging to asphalt and bare soil are dark red, low grassland and crop vegetation are bright red to yellow, shrubs and low trees are green and high trees are blue. Depending on roof material and DTM quality, buildings are shown from red through purple to dark blue. Erroneously high or low points, or points with incorrect amplitude or echo width usually have colours contrasting from terrain or vegetation. This allows efficient visual interpretation of the point cloud in planar, profile and 3D views since it reduces crowding of the scene and delivers intuitive contextual information. The resulting visualization has proved useful for vegetation analysis for habitat mapping, and can also be applied as a first step for point cloud level classification. An interactive demonstration of the visualization script is shown during poster attendance, including the opportunity to view your own point cloud sample files.

The Development of a Situational Judgement Test of Personal Attributes for Quality Teaching in Rural and Remote Australia

ERIC Educational Resources Information Center

Durksen, Tracy L.; Klassen, Robert M.

2018-01-01

Education authorities in Australia are calling for valid tools to help assess prospective teachers' non-academic attributes, with a particular need for identifying those attributes necessary for effective teaching in specific contexts. With the New South Wales (NSW) Department of Education, we aimed to develop a scenario-based tool to help assess…

Achieving graduate outcomes in undergraduate nursing education: following the Yellow Brick Road.

PubMed

Baldwin, Adele; Bentley, Karyn; Langtree, Tanya; Mills, Jane

2014-01-01

Nursing practice is a dynamic and constantly changing field within healthcare, with well-documented challenges to maintaining a suitably skilled workforce to meet the needs of the community it serves. Undergraduate nursing education provides the mandatory minimum requirements for professional registration. Each nursing program has clearly stated graduate attributes, qualities that their graduates will possess on graduation. The aim of this paper is to stimulate discussion about graduate attributes for nurses, a transferrable set of specific attributes that make nursing graduates work ready. This paper focuses on identifying specific attributes, the embedding of those attributes in nursing education, particularly through role modelling, with the aim of producing a future workforce that is knowledgeable, compassionate and confident. The graduate attributes are likened to the qualities sought by the characters in 'The Wizard of Oz'; brains, heart and courage and the learning process as the 'Yellow Brick Road'. There is a relative lack of discussion about role modelling by nurse educators for nursing students, a potentially undervalued learning experience that we believe must be brought to the forefront of discussions pertaining to undergraduate nursing education and achieving graduate outcomes. Copyright © 2013 Elsevier Ltd. All rights reserved.

ESIM: Edge Similarity for Screen Content Image Quality Assessment.

PubMed

Ni, Zhangkai; Ma, Lin; Zeng, Huanqiang; Chen, Jing; Cai, Canhui; Ma, Kai-Kuang

2017-10-01

In this paper, an accurate full-reference image quality assessment (IQA) model developed for assessing screen content images (SCIs), called the edge similarity (ESIM), is proposed. It is inspired by the fact that the human visual system (HVS) is highly sensitive to edges that are often encountered in SCIs; therefore, essential edge features are extracted and exploited for conducting IQA for the SCIs. The key novelty of the proposed ESIM lies in the extraction and use of three salient edge features-i.e., edge contrast, edge width, and edge direction. The first two attributes are simultaneously generated from the input SCI based on a parametric edge model, while the last one is derived directly from the input SCI. The extraction of these three features will be performed for the reference SCI and the distorted SCI, individually. The degree of similarity measured for each above-mentioned edge attribute is then computed independently, followed by combining them together using our proposed edge-width pooling strategy to generate the final ESIM score. To conduct the performance evaluation of our proposed ESIM model, a new and the largest SCI database (denoted as SCID) is established in our work and made to the public for download. Our database contains 1800 distorted SCIs that are generated from 40 reference SCIs. For each SCI, nine distortion types are investigated, and five degradation levels are produced for each distortion type. Extensive simulation results have clearly shown that the proposed ESIM model is more consistent with the perception of the HVS on the evaluation of distorted SCIs than the multiple state-of-the-art IQA methods.

Quality of Care Attributions to Employed Versus Stay-at-Home Mothers

ERIC Educational Resources Information Center

Shpancer, Noam; Melick, Katherine M.; Sayre, Pamela S.; Spivey, Aria T.

2006-01-01

The present study was designed to find whether evaluations of maternal competence are linked to mothers' employment status and the quality of maternal care. Participants rated videotaped vignettes, depicting either high-quality or low-quality mother-infant interactions, on various dimensions of care quality. The videotaped mothers were described…

The Effects of Quality of Care on Costs: A Conceptual Framework

PubMed Central

Nuckols, Teryl K; Escarce, José J; Asch, Steven M

2013-01-01

Context The quality of health care and the financial costs affected by receiving care represent two fundamental dimensions for judging health care performance. No existing conceptual framework appears to have described how quality influences costs. Methods We developed the Quality-Cost Framework, drawing from the work of Donabedian, the RAND/UCLA Appropriateness Method, reports by the Institute of Medicine, and other sources. Findings The Quality-Cost Framework describes how health-related quality of care (aspects of quality that influence health status) affects health care and other costs. Structure influences process, which, in turn, affects proximate and ultimate outcomes. Within structure, subdomains include general structural characteristics, circumstance-specific (e.g., disease-specific) structural characteristics, and quality-improvement systems. Process subdomains include appropriateness of care and medical errors. Proximate outcomes consist of disease progression, disease complications, and care complications. Each of the preceding subdomains influences health care costs. For example, quality improvement systems often create costs associated with monitoring and feedback. Providing appropriate care frequently requires additional physician visits and medications. Care complications may result in costly hospitalizations or procedures. Ultimate outcomes include functional status as well as length and quality of life; the economic value of these outcomes can be measured in terms of health utility or health-status-related costs. We illustrate our framework using examples related to glycemic control for type 2 diabetes mellitus or the appropriateness of care for low back pain. Conclusions The Quality-Cost Framework describes the mechanisms by which health-related quality of care affects health care and health status–related costs. Additional work will need to validate the framework by applying it to multiple clinical conditions. Applicability could be assessed by using the framework to classify the measures of quality and cost reported in published studies. Usefulness could be demonstrated by employing the framework to identify design flaws in published cost analyses, such as omitting the costs attributable to a relevant subdomain of quality. PMID:23758513

On Regional Modeling to Support Air Quality Policies

EPA Science Inventory

We examine the use of the Community Multiscale Air Quality (CMAQ) model in simulating the changes in the extreme values of air quality that are of interest to the regulatory agencies. Year-to-year changes in ozone air quality are attributable to variations in the prevailing mete...

Symptom Clusters and Quality of Life in Hospice Patients with Cancer

PubMed

Omran, Suha; Khader, Yousef; McMillan, Susan

2017-09-27

Background: Symptom control is an important part of palliative care and important to achieve optimal quality of life (QOL). Studies have shown that patients with advanced cancer suffer from diverse and often severe physical and psychological symptoms. The aim is to explore the influence of symptom clusters on QOL among patients with advanced cancer. Materials and Methods: 709 patients with advanced cancer were recruited to participate in a clinical trial focusing on symptom management and QOL. Patients were adults newly admitted to hospice home care in one of two hospices in southwest Florida, who could pass mental status screening. The instruments used for data collection were the Demographic Data Form, Memorial Symptom Assessment Scale (MSAS), and the Hospice Quality of Life Index-14. Results: Exploratory factor analysis and multiple regression were used to identify symptom clusters and their influence on QOL. The results revealed that the participants experienced multiple concurrent symptoms. There were four symptom clusters found among these cancer patients. Individual symptom distress scores that were the strongest predictors of QOL were: feeling pain; dry mouth; feeling drowsy; nausea; difficulty swallowing; worrying and feeling nervous. Conclusions: Patients with advanced cancer reported various concurrent symptoms, and these form symptom clusters of four main categories. The four symptoms clusters have a negative influence on patients’ QOL and required specific care from different members of the hospice healthcare team. The results of this study should be used to guide health care providers’ symptom management. Proper attention to symptom clusters should be the basis for accurate planning of effective interventions to manage the symptom clusters experienced by advanced cancer patients. The health care provider needs to plan ahead for these symptoms and manage any concurrent symptoms for successful promotion of their patient’s QOL. Creative Commons Attribution License

Health inequalities in the Netherlands: trends in quality-adjusted life expectancy (QALE) by educational level.

PubMed

Gheorghe, Maria; Wubulihasimu, Parida; Peters, Frederik; Nusselder, Wilma; Van Baal, Pieter H M

2016-10-01

Quality-adjusted life expectancy (QALE) has been proposed as a summary measure of population health because it encompasses multiple health domains as well as length of life. However, trends in QALE by education or other socio-economic measure have not yet been reported. This study investigates changes in QALE stratified by educational level for the Dutch population in the period 2001-2011. Using data from multiple sources, we estimated mortality rates and health-related quality of life (HRQoL) as functions of age, gender, calendar year and educational level. Subsequently, predictions from these regressions were combined for calculating QALE at ages 25 and 65. QALE changes were decomposed into effects of mortality and HRQoL. In 2001-2011, QALE increased for men and women at all educational levels, the largest increases being for highly educated resulting in a widening gap by education. In 2001, at age 25, the absolute QALE difference between the low and the highly educated was 7.4 healthy years (36.7 vs. 44.1) for men and 6.3 healthy years (39.5 vs. 45.8) for women. By 2011, the QALE difference increased to 8.1 healthy years (38.8 vs. 46.9) for men and to 7.1 healthy years (41.3 vs. 48.4) for women. Similar results were observed at age 65. Although the gap was largely attributable to widening inequalities in mortality, widening inequalities in HRQoL were also substantial. In the Netherlands, population health as measured by QALE has improved, but QALE inequalities have widened more than inequalities in life expectancy alone. © The Author 2016. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Measuring, evaluating and improving hospital quality parameters/dimensions--an integrated healthcare quality approach.

PubMed

Zineldin, Mosad; Camgöz-Akdağ, Hatice; Vasicheva, Valiantsina

2011-01-01

This paper aims to examine the major factors affecting cumulative summation, to empirically examine the major factors affecting satisfaction and to address the question whether patients in Kazakhstan evaluate healthcare similarly or differently from patients in Egypt and Jordan. A questionnaire, adapted from previous research, was distributed to Kazakhstan inpatients. The questionnaire contained 39 attributes about five newly-developed quality dimensions (5Qs), which were identified to be the most relevant attributes for hospitals. The questionnaire was translated into Russian to increase the response rate and improve data quality. Almost 200 usable questionnaires were returned. Frequency distribution, factor analysis and reliability checks were used to analyze the data. The three biggest concerns for Kazakhstan patients are: infrastructure; atmosphere; and interaction. Hospital staffs concern for patients' needs, parking facilities for visitors, waiting time and food temperature were all common specific attributes, which were perceived as concerns. These were shortcomings in all three countries. Improving health service quality by applying total relationship management and the 5Qs model together with a customer-orientation strategy is recommended. Results can be used by hospital staff to reengineer and redesign creatively their quality management processes and help move towards more effective healthcare quality strategies. Patients in three countries have similar concerns and quality perceptions. The paper describes a new instrument and method. The study assures relevance, validity and reliability, while being explicitly change-oriented. The authors argue that patient satisfaction is a cumulative construct, summing satisfaction as five different qualities (5Qs): object; processes; infrastructure; interaction and atmosphere.

Stakeholder analysis: theAndalusian Agency For Healthcare Quality case.

PubMed

Reyes-Alcázar, Víctor; Casas-Delgado, Marta; Herrera-Usagre, Manuel; Torres-Olivera, Antonio

2012-01-01

The aim of this study was to identify the different groups that can affect or be affected by an agency charged with the promoting and guaranteeing of health care quality in Andalusian region (Spain) and to provide a framework with the stakeholders included in different categories. The study adopted a cross-sectional research design. A case study with structured interviews among Andalusian Agency for Healthcare Quality Steering Committee members was carried out in 2010 to define stakeholders' categories and map the interest groups using 5 attributes: influence, importance, legitimacy, power, and urgency. After identification and categorization, stakeholders were weighted qualitatively according to the attributes of importance and influence using 4 possible levels. A matrix was made with the collected data relating both attributes. Furthermore, 8 different types of stakeholders were identified according to attributes power, legitimacy, and urgency. The study concludes that identifying and classifying stakeholders are fundamental to ensuring the success of an organization that must respond to needs and expectations, especially those of its clients. Moreover, knowing stakeholder linkages can contribute to increase organizational worth. This is essential for organizations basically directed to the provision of services in the scope of health care.

Identification, summary and comparison of tools used to measure organizational attributes associated with chronic disease management within primary care settings

PubMed Central

Lukewich, Julia; Corbin, Renée; VanDenKerkhof, Elizabeth G; Edge, Dana S; Williamson, Tyler; Tranmer, Joan E

2014-01-01

Rationale, aims and objectives Given the increasing emphasis being placed on managing patients with chronic diseases within primary care, there is a need to better understand which primary care organizational attributes affect the quality of care that patients with chronic diseases receive. This study aimed to identify, summarize and compare data collection tools that describe and measure organizational attributes used within the primary care setting worldwide. Methods Systematic search and review methodology consisting of a comprehensive and exhaustive search that is based on a broad question to identify the best available evidence was employed. Results A total of 30 organizational attribute data collection tools that have been used within the primary care setting were identified. The tools varied with respect to overall focus and level of organizational detail captured, theoretical foundations, administration and completion methods, types of questions asked, and the extent to which psychometric property testing had been performed. The tools utilized within the Quality and Costs of Primary Care in Europe study and the Canadian Primary Health Care Practice-Based Surveys were the most recently developed tools. Furthermore, of the 30 tools reviewed, the Canadian Primary Health Care Practice-Based Surveys collected the most information on organizational attributes. Conclusions There is a need to collect primary care organizational attribute information at a national level to better understand factors affecting the quality of chronic disease prevention and management across a given country. The data collection tools identified in this review can be used to establish data collection strategies to collect this important information. PMID:24840066

Acceptance Probability (P a) Analysis for Process Validation Lifecycle Stages.

PubMed

Alsmeyer, Daniel; Pazhayattil, Ajay; Chen, Shu; Munaretto, Francesco; Hye, Maksuda; Sanghvi, Pradeep

2016-04-01

This paper introduces an innovative statistical approach towards understanding how variation impacts the acceptance criteria of quality attributes. Because of more complex stage-wise acceptance criteria, traditional process capability measures are inadequate for general application in the pharmaceutical industry. The probability of acceptance concept provides a clear measure, derived from specific acceptance criteria for each quality attribute. In line with the 2011 FDA Guidance, this approach systematically evaluates data and scientifically establishes evidence that a process is capable of consistently delivering quality product. The probability of acceptance provides a direct and readily understandable indication of product risk. As with traditional capability indices, the acceptance probability approach assumes that underlying data distributions are normal. The computational solutions for dosage uniformity and dissolution acceptance criteria are readily applicable. For dosage uniformity, the expected AV range may be determined using the s lo and s hi values along with the worst case estimates of the mean. This approach permits a risk-based assessment of future batch performance of the critical quality attributes. The concept is also readily applicable to sterile/non sterile liquid dose products. Quality attributes such as deliverable volume and assay per spray have stage-wise acceptance that can be converted into an acceptance probability. Accepted statistical guidelines indicate processes with C pk > 1.33 as performing well within statistical control and those with C pk < 1.0 as "incapable" (1). A C pk > 1.33 is associated with a centered process that will statistically produce less than 63 defective units per million. This is equivalent to an acceptance probability of >99.99%.

Effects of Mindfulness-Based Stress Reduction Intervention on Psychological Well-being and Quality of Life: Is Increased Mindfulness Indeed the Mechanism?

PubMed Central

Kuijpers, Karlijn F.

2008-01-01

Background Although several studies have reported positive effects of mindfulness-based stress reduction (MBSR) intervention on psychological well-being, it is not known whether these effects are attributable to a change in mindfulness. Purpose The aim of this study is to compare the effects of MBSR to a waiting-list control condition in a randomized controlled trial while examining potentially mediating effects of mindfulness. Methods Forty women and 20 men from the community with symptoms of distress (mean age 43.6 years, SD = 10.1) were randomized into a group receiving MBSR or a waiting-list control group. Before and after the intervention period, questionnaires were completed on psychological well-being, quality of life, and mindfulness. Results Repeated measures multiple analysis of variance (MANCOVAs) showed that, compared with the control group, the intervention resulted in significantly stronger reductions of perceived stress (p = 0.016) and vital exhaustion (p = 0.001) and stronger elevations of positive affect (p = 0.006), quality of life (p = .009), as well as mindfulness (p = 0.001). When mindfulness was included as a covariate in the MANCOVA, the group effects on perceived stress and quality of life were reduced to nonsignificance. Conclusion Increased mindfulness may, at least partially, mediate the positive effects of mindfulness-based stress reduction intervention. PMID:18535870

Advanced qualification of pharmaceutical excipient suppliers by multiple analytics and multivariate analysis combined.

PubMed

Hertrampf, A; Müller, H; Menezes, J C; Herdling, T

2015-11-10

Pharmaceutical excipients have different functions within a drug formulation, consequently they can influence the manufacturability and/or performance of medicinal products. Therefore, critical to quality attributes should be kept constant. Sometimes it may be necessary to qualify a second supplier, but its product will not be completely equal to the first supplier product. To minimize risks of not detecting small non-similarities between suppliers and to detect lot-to-lot variability for each supplier, multivariate data analysis (MVA) can be used as a more powerful alternative to classical quality control that uses one-parameter-at-a-time monitoring. Such approach is capable of supporting the requirements of a new guideline by the European Parliament and Council (2015/C-95/02) demanding appropriate quality control strategies for excipients based on their criticality and supplier risks in ensuring quality, safety and function. This study compares calcium hydrogen phosphate from two suppliers. It can be assumed that both suppliers use different manufacturing processes. Therefore, possible chemical and physical differences were investigated by using Raman spectroscopy, laser diffraction and X-ray powder diffraction. Afterwards MVA was used to extract relevant information from each analytical technique. Both CaHPO4 could be discriminated by their supplier. The gained knowledge allowed to specify an enhanced strategy for second supplier qualification. Copyright © 2015 Elsevier B.V. All rights reserved.

Are extreme hydro-meteorological events a prerequisite for extreme water quality impacts? Exploring climate impacts on inland and coastal waters

NASA Astrophysics Data System (ADS)

Michalak, A. M.; Balaji, V.; Del Giudice, D.; Sinha, E.; Zhou, Y.; Ho, J. C.

2017-12-01

Questions surrounding water sustainability, climate change, and extreme events are often framed around water quantity - whether too much or too little. The massive impacts of extreme water quality impairments are equally compelling, however. Recent years have provided a host of compelling examples, with unprecedented harmful algal blooms developing along the West coast, in Utah Lake, in Lake Erie, and off the Florida coast, and huge hypoxic dead zones continuing to form in regions such as Lake Erie, the Chesapeake Bay, and the Gulf of Mexico. Linkages between climate change, extreme events, and water quality impacts are not well understood, however. Several factors explain this lack of understanding, including the relative complexity of underlying processes, the spatial and temporal scale mismatch between hydrologists and climatologists, and observational uncertainty leading to ambiguities in the historical record. Here, we draw on a number of recent studies that aim to quantitatively link meteorological variability and water quality impacts to test the hypothesis that extreme water quality impairments are the result of extreme hydro-meteorological events. We find that extreme hydro-meteorological events are neither always a necessary nor a sufficient condition for the occurrence of extreme water quality impacts. Rather, extreme water quality impairments often occur in situations where multiple contributing factors compound, which complicates both attribution of historical events and the ability to predict the future incidence of such events. Given the critical societal importance of water quality projections, a concerted program of uncertainty reduction encompassing observational and modeling components will be needed to examine situations where extreme weather plays an important, but not solitary, role in the chain of cause and effect.

The use of multiple tracers to evaluate the impact of sewered and non-sewered development on coastal water quality in a rural area of Florida.

PubMed

Meeroff, Daniel E; Bloetscher, Frederick; Long, Sharon C; Bocca, Thais

2014-05-01

When onsite wastewater treatment and disposal systems (OSTDS) are not sited appropriately or installed properly, wastewater constituents can be a source of adverse environmental impacts to soil and groundwater, which can lead to potential public health risks. A paired monitoring design developed to compare water quality in sewered and non-sewered areas is presented here. It is suggested as a possible monitoring scheme for assessing the impact of sewer installation projects. As such, two sets of single-family, rural residential Florida neighborhoods were evaluated over a two-year period to gain insight into the effects of small-community use of OSTDS on coastal water quality. One set of two neighborhoods were connected to the sanitary sewer network and the other set of two were served exclusively by OSTDS. Water quality sampling was conducted at the paired sites during seasonal high water table (SHWT) and seasonal low water table (SLWT) events. Measured surface water quality during the SHWT showed indications of environmental impacts from OSTDS in terms of nutrients, microbial pathogen indicators, and other water quality measures, such as turbidity and conductivity. However, during the SLWT events, no obvious impacts attributable to OSTDS were detected. The water quality results indicate that OSTDS impacts may be measureable in rural areas. Other factors, such as microbial indicator survival and regrowth potential, may confound the understanding of water quality impacts of sewer projects. For example, the microbial indicators Escherichia coli and enterococci were found to persist over time and therefore did not always represent true comparisons of OSTDS and sewered areas between seasons. The timeframe for evaluating the effects of sewer projects may be longer than anticipated because of this survival and regrowth phenomenon.

Improving quality-of-life outcomes for patients with cancer through mediating effects of depressive symptoms and functional status: a three-path mediation model.

PubMed

Hsu, Mei-Chi; Tu, Chun-Hsien

2014-09-01

To test a hypothetical three-path mediation model evaluating the effects of functional status and depressive symptoms on the relationship between fatigue and quality of life in patients with cancer on the basis of the Theory of Unpleasant Symptoms. Patients with cancer often experience two or more concurrent, interrelated, mutually influential symptoms. Multiple unpleasant symptoms that have been proposed as mediating variables affecting quality of life in a model proposed in recent cancer studies are scanty. This study was a cross-sectional, descriptive, correlational design. Three hundred and twenty-six patients with cancer from oncology clinics were recruited in Taiwan between 2010-2011. Mediation models were tested and confirmed by applying structural modelling using Analysis of Moment Structures and the joint significance test. Fatigue affects patient quality of life directly or indirectly through functional status and depressive symptoms. These two mediating variables exhibited direct effects on quality of life. A path analysis approach revealed that 47·28 and 67·70% of the total effects of functional status and depressive symptoms, respectively, on the quality-of-life mediation models are attributable to 29·6 and 44·7% of the total effects between fatigue and quality of life, which mediated through two mediators, respectively. Quality of life may be enhanced by simultaneously improving physiological and psychological factors. An understanding of mediating effects is valuable in nursing care of patients with cancer, particularly in the early phase of treatment or in newly diagnosed stages I-III or recently treated patients with cancer in different disease stages. © 2013 John Wiley & Sons Ltd.

Machine Vision-Based Measurement Systems for Fruit and Vegetable Quality Control in Postharvest.

PubMed

Blasco, José; Munera, Sandra; Aleixos, Nuria; Cubero, Sergio; Molto, Enrique

Individual items of any agricultural commodity are different from each other in terms of colour, shape or size. Furthermore, as they are living thing, they change their quality attributes over time, thereby making the development of accurate automatic inspection machines a challenging task. Machine vision-based systems and new optical technologies make it feasible to create non-destructive control and monitoring tools for quality assessment to ensure adequate accomplishment of food standards. Such systems are much faster than any manual non-destructive examination of fruit and vegetable quality, thus allowing the whole production to be inspected with objective and repeatable criteria. Moreover, current technology makes it possible to inspect the fruit in spectral ranges beyond the sensibility of the human eye, for instance in the ultraviolet and near-infrared regions. Machine vision-based applications require the use of multiple technologies and knowledge, ranging from those related to image acquisition (illumination, cameras, etc.) to the development of algorithms for spectral image analysis. Machine vision-based systems for inspecting fruit and vegetables are targeted towards different purposes, from in-line sorting into commercial categories to the detection of contaminants or the distribution of specific chemical compounds on the product's surface. This chapter summarises the current state of the art in these techniques, starting with systems based on colour images for the inspection of conventional colour, shape or external defects and then goes on to consider recent developments in spectral image analysis for internal quality assessment or contaminant detection.

Water Quality Assessment of River Soan (Pakistan) and Source Apportionment of Pollution Sources Through Receptor Modeling.

PubMed

Nazeer, Summya; Ali, Zeshan; Malik, Riffat Naseem

2016-07-01

The present study was designed to determine the spatiotemporal patterns in water quality of River Soan using multivariate statistics. A total of 26 sites were surveyed along River Soan and its associated tributaries during pre- and post-monsoon seasons in 2008. Hierarchical agglomerative cluster analysis (HACA) classified sampling sites into three groups according to their degree of pollution, which ranged from least to high degradation of water quality. Discriminant function analysis (DFA) revealed that alkalinity, orthophosphates, nitrates, ammonia, salinity, and Cd were variables that significantly discriminate among three groups identified by HACA. Temporal trends as identified through DFA revealed that COD, DO, pH, Cu, Cd, and Cr could be attributed for major seasonal variations in water quality. PCA/FA identified six factors as potential sources of pollution of River Soan. Absolute principal component scores using multiple regression method (APCS-MLR) further explained the percent contribution from each source. Heavy metals were largely added through industrial activities (28 %) and sewage waste (28 %), nutrients through agriculture runoff (35 %) and sewage waste (28 %), organic pollution through sewage waste (27 %) and urban runoff (17 %) and macroelements through urban runoff (39 %), and mineralization and sewage waste (30 %). The present study showed that anthropogenic activities are the major source of variations in River Soan. In order to address the water quality issues, implementation of effective waste management measures are needed.

QTL mapping of fruit mineral contents provides new chances for molecular breeding of tomato nutritional traits.

PubMed

Capel, Carmen; Yuste-Lisbona, Fernando J; López-Casado, Gloria; Angosto, Trinidad; Heredia, Antonio; Cuartero, Jesús; Fernández-Muñoz, Rafael; Lozano, Rafael; Capel, Juan

2017-05-01

Agronomical characterization of a RIL population for fruit mineral contents allowed for the identification of QTL controlling these fruit quality traits, flanked by co-dominant markers useful for marker-assisted breeding. Tomato quality is a multi-variant attribute directly depending on fruit chemical composition, which in turn determines the benefits of tomato consumption for human health. Commercially available tomato varieties possess limited variability in fruit quality traits. Wild species, such as Solanum pimpinellifolium, could provide different nutritional advantages and can be used for tomato breeding to improve overall fruit quality. Determining the genetic basis of the inheritance of all the traits that contribute to tomato fruit quality will increase the efficiency of the breeding program necessary to take advantage of the wild species variability. A high-density linkage map has been constructed from a recombinant inbred line (RIL) population derived from a cross between tomato Solanum lycopersicum and the wild-relative species S. pimpinellifolium. The RIL population was evaluated for fruit mineral contents during three consecutive growing seasons. The data obtained allowed for the identification of main QTL and novel epistatic interaction among QTL controlling fruit mineral contents on the basis of a multiple-environment analysis. Most of the QTL were flanked by candidate genes providing valuable information for both tomato breeding for new varieties with novel nutritional properties and the starting point to identify the genes underlying these QTL, which will help to reveal the genetic basis of tomato fruit nutritional properties.

EPA Office of Water (OW): 2002 SPARROW Total NP (Catchments)

EPA Pesticide Factsheets

SPARROW (SPAtially Referenced Regressions On Watershed attributes) is a watershed modeling tool with output that allows the user to interpret water quality monitoring data at the regional and sub-regional scale. The model relates in-stream water-quality measurements to spatially referenced characteristics of watersheds, including pollutant sources and environmental factors that affect rates of pollutant delivery to streams from the land and aquatic, in-stream processing . The core of the model consists of a nonlinear regression equation describing the non-conservative transport of contaminants from point and non-point (or ??diffuse??) sources on land to rivers and through the stream and river network. SPARROW estimates contaminant concentrations, loads (or ??mass,?? which is the product of concentration and streamflow), and yields in streams (mass of nitrogen and of phosphorus entering a stream per acre of land). It empirically estimates the origin and fate of contaminants in streams and receiving bodies, and quantifies uncertainties in model predictions. The model predictions are illustrated through detailed maps that provide information about contaminant loadings and source contributions at multiple scales for specific stream reaches, basins, or other geographic areas.

Assessment of sediment quality in the Mediterranean Sea-Boughrara lagoon exchange areas (southeastern Tunisia): GIS approach-based chemometric methods.

PubMed

Kharroubi, Adel; Gargouri, Dorra; Baati, Houda; Azri, Chafai

2012-06-01

Concentrations of selected heavy metals (Cd, Pb, Zn, Cu, Mn, and Fe) in surface sediments from 66 sites in both northern and eastern Mediterranean Sea-Boughrara lagoon exchange areas (southeastern Tunisia) were studied in order to understand current metal contamination due to the urbanization and economic development of nearby several coastal regions of the Gulf of Gabès. Multiple approaches were applied for the sediment quality assessment. These approaches were based on GIS coupled with chemometric methods (enrichment factors, geoaccumulation index, principal component analysis, and cluster analysis). Enrichment factors and principal component analysis revealed two distinct groups of metals. The first group corresponded to Fe and Mn derived from natural sources, and the second group contained Cd, Pb, Zn, and Cu originated from man-made sources. For these latter metals, cluster analysis showed two distinct distributions in the selected areas. They were attributed to temporal and spatial variations of contaminant sources input. The geoaccumulation index (I (geo)) values explained that only Cd, Pb, and Cu can be considered as moderate to extreme pollutants in the studied sediments.

Calculating Proper Motions in the WFCAM Science Archive for the UKIRT Infrared Deep Sky Surveys

NASA Astrophysics Data System (ADS)

Collins, R.; Hambly, N.

2012-09-01

The ninth data release from the UKIRT Infrared Deep Sky Surveys (hereafter UKIDSS DR9), represents five years worth of observations by its wide-field camera (WFCAM) and will be the first to include proper motion values in its source catalogues for the shallow, wide-area surveys; the Large Area Survey (LAS), Galactic Clusters Survey (GCS) and (ultimately) Galactic Plane Survey (GPS). We, the Wide Field Astronomy Unit (WFAU) at the University of Edinburgh who prepare these regular data releases in the WFCAM Science Archive (WSA), describe in this paper how we make optimal use of the individual detection catalogues from each observation to derive high-quality astrometric fits for the positions of each detection enabling us to calculate a proper motion solution across multiple epochs and passbands when constructing a merged source catalogue. We also describe how the proper motion solutions affect the calculation of the various attributes provided in the database source catalogue tables, what measures of data quality we provide and a demonstration of the results for observations of the Pleiades cluster.

Attribution of hydrological change using the Method of Multiple Working Hypotheses

NASA Astrophysics Data System (ADS)

Harrigan, Shaun

2017-04-01

The methods we have developed for managing our long-term water supply and protection from extreme hydrological events such as droughts and floods have been founded on the assumption that the hydrological cycle operates under natural conditions. However, it increasingly recognised that humans have the potential to induce significant change in almost every component of the hydrological cycle, for example, climate change, land-use change, and river engineering. Statistical detection of change in streamflow, outside that of natural variability, is an important scientific endeavour, but it does not tell us anything about the drivers of change. Attribution is the process of establishing the most likely cause(s) of a detected change - the why. Attribution is complex due to the integrated nature of streamflow and the proliferation of multiple possible drivers. It is perhaps this complexity, combined with few proven theoretical approaches to this problem in hydrology that has led to others to call for "more efforts and scientific rigour" (Merz et al., 2012). It is easier to limit the cause of a detected change to a single driver, or use simple correlation analysis alone as evidence of causation. It is convenient when the direction of a change in streamflow is consistent with what is expected from a well-known driver such as climate change. Over a century ago, Thomas Chamberlin argued these types of issues were common in many disciplines given how the scientific method is approached in general. His 1890 article introduces the Method of Multiple Working Hypotheses (MMWH) in an attempt to limit our confirmation bias and strives for increased objectivity. This presentation will argue that the MMWH offers an attractive theoretical approach to the attribution of hydrological change in modern hydrology as demonstrated through a case study of a well-documented change point in streamflow within the Boyne Catchment in Ireland. Further Reading Chamberlin, T. C.: The Method of Multiple Working Hypotheses, Science (old series), 15(366), 92-96, doi:10.1126/science.ns-15.366.92, 1890. Harrigan, S., Murphy, C., Hall, J., Wilby, R. L. and Sweeney, J.: Attribution of detected changes in streamflow using multiple working hypotheses, Hydrol. Earth Syst. Sci., 18(5), 1935-1952, doi:10.5194/hess-18-1935-2014, 2014. Merz, B., Vorogushyn, S., Uhlemann, S., Delgado, J. and Hundecha, Y.: HESS Opinions "More efforts and scientific rigour are needed to attribute trends in flood time series," Hydrol. Earth Syst. Sci., 16(5), 1379-1387, doi:10.5194/hess-16-1379-2012, 2012.

Perceptions of staff attributes in substance abuse treatment.

PubMed

Grosenick, J K; Hatmaker, C M

2000-10-01

Qualified professional staff contribute significantly to successful health-care service delivery. Organizations view six categories of staff attributes as valued qualities of competent personnel: knowledge and experience, organizational citizenship, interpersonal skills, service orientation, personal attributes, and leadership skills. This study presents the perceptions regarding these and other staff attributes held by female clients and staff from a substance abuse treatment facility. Results indicated that four attributes were perceived as particularly influential in assisting women to reach treatment goals. These included knowledge and experience, supportiveness, nonthreatening behaviors, and availability. Attention to these variables may prove useful as treatment programs strive to improve client outcomes.

African-American Undergraduates' Perceptions and Attributions of Child Sexual Abuse

ERIC Educational Resources Information Center

Hestick, Henrietta; Perrino, Carrol S.

2009-01-01

This study examined perceptions of child sexual abuse and attributions of responsibility in a cross-sectional convenience sample of 384 African-American undergraduates using a scenario manipulating the age of the victim, gender of the victim, and gender of the perpetrator. Multiple interactions of respondent, victim, and perpetrator gender on…

Comparison of Radio Frequency Distinct Native Attribute and Matched Filtering Techniques for Device Discrimination and Operation Identification

DTIC Science & Technology

identification. URE from ten MSP430F5529 16-bit microcontrollers were analyzed using: 1) RF distinct native attributes (RF-DNA) fingerprints paired with multiple...discriminant analysis/maximum likelihood (MDA/ML) classification, 2) RF-DNA fingerprints paired with generalized relevance learning vector quantized

On Regional Modeling to Support Air Quality Policies (book chapter)

EPA Science Inventory

We examine the use of the Community Multiscale Air Quality (CMAQ) model in simulating the changes in the extreme values of air quality that are of interest to the regulatory agencies. Year-to-year changes in ozone air quality are attributable to variations in the prevailing meteo...

Evaluation of beef eating quality by Irish consumers.

PubMed

McCarthy, S N; Henchion, M; White, A; Brandon, K; Allen, P

2017-10-01

A consumer's decision to purchase beef is strongly linked to its sensory properties and consistent eating quality is one of the most important attributes. Consumer taste panels were held according to the Meat Standards Australia guidelines and consumers scored beef according to its palatability attributes and completed a socio-demographic questionnaire. Consumers were able to distinguish between beef quality on a scale from unsatisfactory to premium with high accuracy. Premium cuts of beef scored significantly higher on all of the scales compared to poorer quality cuts. Men rated grilled beef higher on juiciness and flavour scales compared to women. Being the main purchaser of beef had no impact on rating scores. Overall the results show that consumers can judge eating quality with high accuracy. Further research is needed to determine how best to communicate inherent benefits that are not visible into extrinsic eating quality indicators, to provide the consumer with consistent indications of quality at the point of purchase. Copyright © 2017 Elsevier Ltd. All rights reserved.

Learning of Rule Ensembles for Multiple Attribute Ranking Problems

NASA Astrophysics Data System (ADS)

Dembczyński, Krzysztof; Kotłowski, Wojciech; Słowiński, Roman; Szeląg, Marcin

In this paper, we consider the multiple attribute ranking problem from a Machine Learning perspective. We propose two approaches to statistical learning of an ensemble of decision rules from decision examples provided by the Decision Maker in terms of pairwise comparisons of some objects. The first approach consists in learning a preference function defining a binary preference relation for a pair of objects. The result of application of this function on all pairs of objects to be ranked is then exploited using the Net Flow Score procedure, giving a linear ranking of objects. The second approach consists in learning a utility function for single objects. The utility function also gives a linear ranking of objects. In both approaches, the learning is based on the boosting technique. The presented approaches to Preference Learning share good properties of the decision rule preference model and have good performance in the massive-data learning problems. As Preference Learning and Multiple Attribute Decision Aiding share many concepts and methodological issues, in the introduction, we review some aspects bridging these two fields. To illustrate the two approaches proposed in this paper, we solve with them a toy example concerning the ranking of a set of cars evaluated by multiple attributes. Then, we perform a large data experiment on real data sets. The first data set concerns credit rating. Since recent research in the field of Preference Learning is motivated by the increasing role of modeling preferences in recommender systems and information retrieval, we chose two other massive data sets from this area - one comes from movie recommender system MovieLens, and the other concerns ranking of text documents from 20 Newsgroups data set.

Consumer palatability scores, sensory descriptive attributes, and volatile compounds of grilled beef steaks from three USDA Quality Grades.

PubMed

Legako, J F; Dinh, T T N; Miller, M F; Adhikari, K; Brooks, J C

2016-02-01

Consumer palatability scores, sensory descriptive attributes, and volatile compounds were assessed for beef Longissimus lumborum steaks of USDA Prime, Low Choice, and Standard grades. Overall and flavor liking was greater (P<0.05) for Prime and Low Choice. Initial flavor impact and fat-like attributes were greater (P<0.05) among Prime and Low Choice. Prime had greater (P<0.05) brown/roasted, beef identity, overall sweetness, and umami. Cardboard was greater (P<0.05) in Standard. Volatile compounds representing flavor development pathways were varied with quality grade. Standard had greater (P<0.05) abundances of n-aldehydes. Phenylacetaldehyde was greater (P<0.05) in Prime and Low Choice. Both 2,3-butanedione and 3-hydroxy-2-butanone were greatest (P<0.05) in Prime. Overall liking was positively correlated with many descriptive attributes, 3-hydroxy-2-butanone, and phenylacetaldehyde, and negatively correlated with cardboard, green, and n-aldehydes. While the measured attributes and volatiles may not be causative of flavor, this data indicates potential for prediction of flavor through their measurement. Copyright © 2015 Elsevier Ltd. All rights reserved.

The effects of food irradiation on quality of pine nut kernels

NASA Astrophysics Data System (ADS)

Gölge, Evren; Ova, Gülden

2008-03-01

Pine nuts ( Pinus pinae) undergo gamma irradiation process with the doses 0.5, 1.0, 3.0, and 5.0 kGy. The changes in chemical, physical and sensory attributes were observed in the following 3 months of storage period. The data obtained from the experiments showed the peroxide values of the pine nut kernels increased proportionally to the dose. On contrary, irradiation process has no effect on the physical quality such as texture and color, fatty acid composition and sensory attributes.

Understanding men's attributions of why they ejaculate before desired: an internet study.

PubMed

Rowland, David L; Neal, Cody J

2014-10-01

Recent developments in the study of men's sexual response have raised significant issues related to the definition and diagnosis of premature ejaculation (PE). We wanted to understand men's perceived reasons for "ejaculating before they wanted," whether they selected attributions from the same broad category when allowed to endorse multiple reasons, and whether younger and older cohorts differed in their attributions. A subsample of 376 men who indicated that they "ejaculated before they wanted" was drawn from a larger pool of 1,249 men participating in an online survey on men's sexual health. This subsample responded to a number of items regarding their ejaculatory patterns, including two questions listing 10 possible self-reported attributions/reasons for their quick ejaculation--one item allowed respondents to endorse multiple reasons, the other limited the response to the most important reason. The primary outcome measure was men's attributions for ejaculating before desired, with choices from 10 possible pretested reasons. In addition, concordance across attributions was determined, that is, if a man responded to one category, was he also likely to select another category? Men who met the ejaculatory latency criterion for PE were generally no different from those who did not. Overall, when required to select the most important attribution, most men identified a specific issue with "lack of self-efficacy" (lack of control or aroused too quickly). Few respondents identified erection loss, partner issues, or medical/medication concerns as the reason--and these patterns were independent of age. Concordance was high across self-efficacy attributions but low across other attributions. Most men who complain of ejaculating before desired attribute this response to problems with self-efficacy. Only a small percent of men identified other possible reasons for their quick ejaculation. Such findings have implications for both the diagnostic process and definitional language for PE. © 2014 International Society for Sexual Medicine.

Overall quality and shelf life of minimally processed and modified atmosphere packaged 'ready-to-eat' pomegranate arils.

PubMed

Ayhan, Zehra; Eştürk, Okan

2009-06-01

Minimally processed ready-to-eat pomegranate arils have become popular due to their convenience, high value, unique sensory characteristics, and health benefits. The objective of this study was to monitor quality parameters and to extend the shelf life of ready-to-eat pomegranate arils packaged with modified atmospheres. Minimally processed pomegranate arils were packed in PP trays sealed with BOPP film under 4 atmospheres including low and super atmospheric oxygen. Packaged arils were stored at 5 degrees C for 18 d and monitored for internal atmosphere and quality attributes. Atmosphere equilibrium was reached for all MAP applications except for high oxygen. As a general trend, slight or no significant change was detected in chemical and physical attributes of pomegranate arils during cold storage. The aerobic mesophilic bacteria were in the range of 2.30 to 4.51 log CFU/g at the end of the storage, which did not affect the sensory quality. Overall, the pomegranate arils packed with air, nitrogen, and enriched oxygen kept quality attributes and were acceptable to sensory panelists on day 18; however, marketability period was limited to 15 d for the low oxygen atmosphere. PP trays sealed with BOPP film combined with either passive or active modified atmospheres and storage at 5 degrees C provided commercially acceptable arils for 18 d with high quality and convenience.

Comparison of beer quality attributes between beers brewed with 100% barley malt and 100% barley raw material.

PubMed

Steiner, Elisabeth; Auer, Andrea; Becker, Thomas; Gastl, Martina

2012-03-15

Brewing with 100% barley using the Ondea® Pro exogenous brewing enzyme product was compared to brewing with 100% barley. The use of barley, rather than malt, in the brewing process and the consequences for selected beer quality attributes (foam formation, colloidal stability and filterability, sensory differences, protein content and composition) was considered. The quality attributes of barley, malt, kettle-full-wort, cold wort, unfiltered beer and filtered beer were assessed. A particular focus was given to monitoring changes in the barley protein composition during the brewing process and how the exogenous OndeaPro® enzymes influenced wort protein composition. All analyses were based on standard brewing methods described in ASBC, EBC or MEBAK. To monitor the protein changes two-dimensional polyacrylamide gel electrophoresis was used. It was shown that by brewing beer with 100% barley and an appropriate addition of exogenous Ondea® Pro enzymes it was possible to efficiently brew beer of a satisfactory quality. The production of beers brewed with 100% barley resulted in good process efficiency (lautering and filtration) and to a final product whose sensory quality was described as light, with little body and mouthfeel, very good foam stability and similar organoleptic qualities compared to conventional malt beer. In spite of the sensory evaluation differences could still be seen in protein content and composition. Copyright © 2011 Society of Chemical Industry.

Formulation and process factors influencing product quality and in vitro performance of ophthalmic ointments.

PubMed

Xu, Xiaoming; Al-Ghabeish, Manar; Rahman, Ziyaur; Krishnaiah, Yellela S R; Yerlikaya, Firat; Yang, Yang; Manda, Prashanth; Hunt, Robert L; Khan, Mansoor A

2015-09-30

Owing to its unique anatomical and physiological functions, ocular surface presents special challenges for both design and performance evaluation of the ophthalmic ointment drug products formulated with a variety of bases. The current investigation was carried out to understand and identify the appropriate in vitro methods suitable for quality and performance evaluation of ophthalmic ointment, and to study the effect of formulation and process variables on its critical quality attributes (CQA). The evaluated critical formulation variables include API initial size, drug percentage, and mineral oil percentage while the critical process parameters include mixing rate, temperature, time and cooling rate. The investigated quality and performance attributes include drug assay, content uniformity, API particle size in ointment, rheological characteristics, in vitro drug release and in vitro transcorneal drug permeation. Using design of experiments (DoE) as well as a novel principle component analysis approach, five of the quality and performance attributes (API particle size, storage modulus of ointment, high shear viscosity of ointment, in vitro drug release constant and in vitro transcorneal drug permeation rate constant) were found to be highly influenced by the formulation, in particular the strength of API, and to a lesser degree by processing variables. Correlating the ocular physiology with the physicochemical characteristics of acyclovir ophthalmic ointment suggested that in vitro quality metrics could be a valuable predictor of its in vivo performance. Published by Elsevier B.V.

Reliability and validity of the Attributional Style Questionnaire- Survey in people with multiple sclerosis

PubMed Central

Kneebone, Ian I.; Dewar, Sophie J.

2016-01-01

Background: The current study aimed to examine the psychometric properties of an attributional style measure that can be administered remotely, to people who have multiple sclerosis (MS). Methods: A total of 495 participants with MS were recruited. Participants completed the Attributional Style Questionnaire-Survey (ASQ-S) and two comparison measures of cognitive variables via postal survey on three occasions, each 12 months apart. Internal reliability, test-retest reliability and congruent validity were considered. Results: The internal reliability of the ASQ-S was good (α > 0.7). The test-retest correlations were significant, but failed to reach the 0.7 set. The congruent validity of the ASQ-S was established relative to the comparisons. Conclusions: The psychometric properties of the ASQ-S indicate that it shows promise as a tool for researchers investigating depression in people with MS and is likely sound to use clinically in this population. PMID:28450893

Stability of fruit quality traits in diverse watermelon cultivars tested in multiple environments

PubMed Central

Dia, Mahendra; Wehner, Todd C; Perkins-Veazie, Penelope; Hassell, Richard; Price, Daniel S; Boyhan, George E; Olson, Stephen M; King, Stephen R; Davis, Angela R; Tolla, Gregory E; Bernier, Jerome; Juarez, Benito

2016-01-01

Lycopene is a naturally occurring red carotenoid compound that is found in watermelon. Lycopene has antioxidant properties. Lycopene content, sugar content and hollowheart resistance are subject to significant genotype×environment interaction (G×E), which makes breeding for these fruit quality traits difficult. The objectives of this study were to (i) evaluate the influence of years and locations on lycopene content, sugar content and hollowheart resistance for a set of watermelon genotypes, and (ii) identify genotypes with high stability for lycopene, sugar, and hollowheart resistance. A diverse set of 40 genotypes was tested over 3 years and 8 locations across the southern United States in replicated, multi-harvest trials. Lycopene was tested in a subset of 10 genotypes. Data were analyzed using univariate and multivariate stability statistics (BLUP-GGE biplot) using SASGxE and RGxE programs. There were strong effects of environment as well as G×E interaction on watermelon quality traits. On the basis of stability measures, genotypes were classified as stable or unstable for each quality trait. 'Crimson Sweet' is an inbred line with high quality trait performance as well as trait stability. 'Stone Mountain', 'Tom Watson', 'Crimson Sweet' and 'Minilee' were among the best genotypes for lycopene content, sugar content and hollowheart resistance. We developed a stability chart based on marketable yield and average ranking generated from different stability measures for yield attributes and quality traits. The chart will assist in choosing parents for improvement of watermelon cultivars. See http://cuke.hort.ncsu.edu/cucurbit/wmelon/wmelonmain.html. PMID:28066557

Launching a Laboratory Testing Process Quality Improvement Toolkit: From the Shared Networks of Colorado Ambulatory Practices and Partners (SNOCAP).

PubMed

Fernald, Douglas; Hamer, Mika; James, Kathy; Tutt, Brandon; West, David

2015-01-01

Family medicine and internal medicine physicians order diagnostic laboratory tests for nearly one-third of patient encounters in an average week, yet among medical errors in primary care, an estimated 15% to 54% are attributed to laboratory testing processes. From a practice improvement perspective, we (1) describe the need for laboratory testing process quality improvements from the perspective of primary care practices, and (2) describe the approaches and resources needed to implement laboratory testing process quality improvements in practice. We applied practice observations, process mapping, and interviews with primary care practices in the Shared Networks of Colorado Ambulatory Practices and Partners (SNOCAP)-affiliated practice-based research networks that field-tested in 2013 a laboratory testing process improvement toolkit. From the data collected in each of the 22 participating practices, common testing quality issues included, but were not limited to, 3 main testing process steps: laboratory test preparation, test tracking, and patient notification. Three overarching qualitative themes emerged: practices readily acknowledge multiple laboratory testing process problems; practices know that they need help addressing the issues; and practices face challenges with finding patient-centered solutions compatible with practice priorities and available resources. While practices were able to get started with guidance and a toolkit to improve laboratory testing processes, most did not seem able to achieve their quality improvement aims unassisted. Providing specific guidance tools with practice facilitation or other rapid-cycle quality improvement support may be an effective approach to improve common laboratory testing issues in primary care. © Copyright 2015 by the American Board of Family Medicine.

Intuitionistic uncertain linguistic partitioned Bonferroni means and their application to multiple attribute decision-making

NASA Astrophysics Data System (ADS)

Liu, Zhengmin; Liu, Peide

2017-04-01

The Bonferroni mean (BM) was originally introduced by Bonferroni and generalised by many other researchers due to its capacity to capture the interrelationship between input arguments. Nevertheless, in many situations, interrelationships do not always exist between all of the attributes. Attributes can be partitioned into several different categories and members of intra-partition are interrelated while no interrelationship exists between attributes of different partitions. In this paper, as complements to the existing generalisations of BM, we investigate the partitioned Bonferroni mean (PBM) under intuitionistic uncertain linguistic environments and develop two linguistic aggregation operators: intuitionistic uncertain linguistic partitioned Bonferroni mean (IULPBM) and its weighted form (WIULPBM). Then, motivated by the ideal of geometric mean and PBM, we further present the partitioned geometric Bonferroni mean (PGBM) and develop two linguistic geometric aggregation operators: intuitionistic uncertain linguistic partitioned geometric Bonferroni mean (IULPGBM) and its weighted form (WIULPGBM). Some properties and special cases of these proposed operators are also investigated and discussed in detail. Based on these operators, an approach for multiple attribute decision-making problems with intuitionistic uncertain linguistic information is developed. Finally, a practical example is presented to illustrate the developed approach and comparison analyses are conducted with other representative methods to verify the effectiveness and feasibility of the developed approach.

Ambient assisted living healthcare frameworks, platforms, standards, and quality attributes.

PubMed

Memon, Mukhtiar; Wagner, Stefan Rahr; Pedersen, Christian Fischer; Beevi, Femina Hassan Aysha; Hansen, Finn Overgaard

2014-03-04

Ambient Assisted Living (AAL) is an emerging multi-disciplinary field aiming at exploiting information and communication technologies in personal healthcare and telehealth systems for countering the effects of growing elderly population. AAL systems are developed for personalized, adaptive, and anticipatory requirements, necessitating high quality-of-service to achieve interoperability, usability, security, and accuracy. The aim of this paper is to provide a comprehensive review of the AAL field with a focus on healthcare frameworks, platforms, standards, and quality attributes. To achieve this, we conducted a literature survey of state-of-the-art AAL frameworks, systems and platforms to identify the essential aspects of AAL systems and investigate the critical issues from the design, technology, quality-of-service, and user experience perspectives. In addition, we conducted an email-based survey for collecting usage data and current status of contemporary AAL systems. We found that most AAL systems are confined to a limited set of features ignoring many of the essential AAL system aspects. Standards and technologies are used in a limited and isolated manner, while quality attributes are often addressed insufficiently. In conclusion, we found that more inter-organizational collaboration, user-centered studies, increased standardization efforts, and a focus on open systems is needed to achieve more interoperable and synergetic AAL solutions.

Quality of Life for Diverse Older Adults in Assisted Living: The Centrality of Control.

PubMed

Koehn, Sharon D; Mahmood, Atiya N; Stott-Eveneshen, Sarah

This pilot project asked: How do ethnically diverse older adult residents of assisted living (AL) facilities in British Columbia (BC) experience quality of life? And, what role, if any, do organizational and physical environmental features play in influencing how quality of life is experienced? The study was conducted at three AL sites in BC: two ethnoculturally targeted and one nontargeted. Environmental audits at each site captured descriptive data on policies, fees, rules, staffing, meals, and activities, and the built environment of the AL building and neighborhood. Using a framework that understands the quality of life of older adults to be contingent on their capability to pursue 5 conceptual attributes-attachment, role, enjoyment, security, and control-we conducted 3 focus groups with residents (1 per site) and 6 interviews with staff (2 per site). Attributes were linked to the environmental features captured in the audits. All dimensions of the environment, especially organizational, influence tenants' capability to attain the attributes of quality of life, most importantly control. Although many tenants accept the trade-off between increased safety and diminished control that accompanies a move into AL, more could be done to minimize that loss. Social workers can advocate for the necessary multi-sectoral changes.

Ambient Assisted Living Healthcare Frameworks, Platforms, Standards, and Quality Attributes

PubMed Central

Memon, Mukhtiar; Wagner, Stefan Rahr; Pedersen, Christian Fischer; Beevi, Femina Hassan Aysha; Hansen, Finn Overgaard

2014-01-01

Ambient Assisted Living (AAL) is an emerging multi-disciplinary field aiming at exploiting information and communication technologies in personal healthcare and telehealth systems for countering the effects of growing elderly population. AAL systems are developed for personalized, adaptive, and anticipatory requirements, necessitating high quality-of-service to achieve interoperability, usability, security, and accuracy. The aim of this paper is to provide a comprehensive review of the AAL field with a focus on healthcare frameworks, platforms, standards, and quality attributes. To achieve this, we conducted a literature survey of state-of-the-art AAL frameworks, systems and platforms to identify the essential aspects of AAL systems and investigate the critical issues from the design, technology, quality-of-service, and user experience perspectives. In addition, we conducted an email-based survey for collecting usage data and current status of contemporary AAL systems. We found that most AAL systems are confined to a limited set of features ignoring many of the essential AAL system aspects. Standards and technologies are used in a limited and isolated manner, while quality attributes are often addressed insufficiently. In conclusion, we found that more inter-organizational collaboration, user-centered studies, increased standardization efforts, and a focus on open systems is needed to achieve more interoperable and synergetic AAL solutions. PMID:24599192

Application of Array Comparative Genomic Hybridization in Newborns with Multiple Congenital Anomalies.

PubMed

Szczałuba, Krzysztof; Nowakowska, Beata; Sobecka, Katarzyna; Smyk, Marta; Castaneda, Jennifer; Klapecki, Jakub; Kutkowska-Kaźmierczak, Anna; Śmigiel, Robert; Bocian, Ewa; Radkowski, Marek; Demkow, Urszula

2016-01-01

Major congenital anomalies are detectable in 2-3 % of the newborn population. Some of their genetic causes are attributable to copy number variations identified by array comparative genomic hybridization (aCGH). The value of aCGH screening as a first-tier test in children with multiple congenital anomalies has been studied and consensus adopted. However, array resolution has not been agreed upon, specifically in the newborn or infant population. Moreover, most array studies have been focused on mixed populations of intellectual disability/developmental delay with or without multiple congenital anomalies, making it difficult to assess the value of microarrays in newborns. The aim of the study was to determine the optimal quality and clinical sensitivity of high-resolution array comparative genomic hybridization in neonates with multiple congenital anomalies. We investigated a group of 54 newborns with multiple congenital anomalies defined as two or more birth defects from more than one organ system. Cytogenetic studies were performed using OGT CytoSure 8 × 60 K microarray. We found ten rearrangements in ten newborns. Of these, one recurrent syndromic microduplication was observed, whereas all other changes were unique. Six rearrangements were definitely pathogenic, including one submicroscopic and five that could be seen on routine karyotype analysis. Four other copy number variants were likely pathogenic. The candidate genes that may explain the phenotype were discussed. In conclusion, high-resolution array comparative hybridization can be applied successfully in newborns with multiple congenital anomalies as the method detects a significant number of pathogenic changes, resulting in early diagnoses. We hypothesize that small changes previously considered benign or even inherited rearrangements should be classified as potentially pathogenic at least until a subsequent clinical assessment would exclude a developmental delay or dysmorphism.

Simultaneous Determination of Multiple Classes of Hydrophilic and Lipophilic Components in Shuang-Huang-Lian Oral Liquid Formulations by UPLC-Triple Quadrupole Linear Ion Trap Mass Spectrometry.

PubMed

Liang, Jun; Sun, Hui-Min; Wang, Tian-Long

2017-11-24

The Shuang-Huang-Lian (SHL) oral liquid is a combined herbal prescription used in the treatment of acute upper respiratory tract infection, acute bronchitis and pneumonia. Multiple constituents are considered to be responsible for the therapeutic effects of SHL. However, the quantitation of the multi-components from multiple classes is still unsatisfactory because of the high complexity of constituents in SHL. In this study, an accurate, rapid, and specific UPLC-MS/MS method was established for simultaneous quantification of 18 compounds from multiple classes in SHL oral liquid formulations. Chromatographic separation was performed on a HSS T3 (1.8 μm, 2.1 mm × 100 mm) column, using a gradient mobile phase system of 0.1% formic acid in acetonitrile and 0.1% formic acid in water at a flow rate of 0.2 mL·min -1 ; the run time was 23 min. The MS was operated in negative electrospray ionization (ESI - ) for analysis of 18 compounds using multiple reaction monitoring (MRM) mode. UPLC-ESI - -MRM-MS/MS method showed good linear relationships ( R ² > 0.999), repeatability (RSD < 3%), precisions (RSD < 3%) and recovery (84.03-101.62%). The validated method was successfully used to determine multiple classes of hydrophilic and lipophilic components in the SHL oral liquids. Finally, principal component analysis (PCA) was used to classify and differentiate SHL oral liquid samples attributed to different manufacturers of China. The proposed UPLC-ESI - -MRM-MS/MS coupled with PCA has been elucidated to be a simple and reliable method for quality evaluation of SHL oral liquids.

An exploratory study of fitness practitioner intentions toward exercise programming for individuals with multiple sclerosis.

PubMed

Kasser, Susan L; Rizzo, Terry

2013-07-01

Increasing community practice that facilitates physical activity for people with multiple sclerosis (MS) is critical to improve health outcomes and enhance quality of life in this population. The purpose of this exploratory study was to employ the Theory of Planned Behavior (TPB) in order to examine beliefs, attitudes and intentions of fitness practitioners (FPs) toward working with adults with MS in community-based fitness facilities. The study also aimed to assess the relative contribution of FP attributes on the best predictor of favorable intentions to work with individuals with MS. Practitioners (N = 580) completed the Fitness Practitioner Survey via a web-based platform. The FPs' intention to work with a club member with MS was best predicted by attitudes (R = .81, R2 = .65, F6,373 = 114.46, p < .001) and favorable attitude was best predicted by perceived competence (R = .52; R2 = .27, F9,338 = 14.18, p < .001). Practitioners believed that, by working with a person with MS, both staff and other club members would benefit and that including an individual with MS into their practice was worth the effort. As well, the individual with MS would benefit by experiencing success, increasing functional independence, and having greater social interaction. Fitness practitioners who had more education, held various professional certifications associated with physical activity and fitness, and had prior positive quality experiences working with diverse populations reported higher perceived competence. Copyright © 2013 Elsevier Inc. All rights reserved.

Advanced multivariate data analysis to determine the root cause of trisulfide bond formation in a novel antibody–peptide fusion

PubMed Central

Goldrick, Stephen; Holmes, William; Bond, Nicholas J.; Lewis, Gareth; Kuiper, Marcel; Turner, Richard

2017-01-01

ABSTRACT Product quality heterogeneities, such as a trisulfide bond (TSB) formation, can be influenced by multiple interacting process parameters. Identifying their root cause is a major challenge in biopharmaceutical production. To address this issue, this paper describes the novel application of advanced multivariate data analysis (MVDA) techniques to identify the process parameters influencing TSB formation in a novel recombinant antibody–peptide fusion expressed in mammalian cell culture. The screening dataset was generated with a high‐throughput (HT) micro‐bioreactor system (AmbrTM 15) using a design of experiments (DoE) approach. The complex dataset was firstly analyzed through the development of a multiple linear regression model focusing solely on the DoE inputs and identified the temperature, pH and initial nutrient feed day as important process parameters influencing this quality attribute. To further scrutinize the dataset, a partial least squares model was subsequently built incorporating both on‐line and off‐line process parameters and enabled accurate predictions of the TSB concentration at harvest. Process parameters identified by the models to promote and suppress TSB formation were implemented on five 7 L bioreactors and the resultant TSB concentrations were comparable to the model predictions. This study demonstrates the ability of MVDA to enable predictions of the key performance drivers influencing TSB formation that are valid also upon scale‐up. Biotechnol. Bioeng. 2017;114: 2222–2234. © 2017 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals, Inc. PMID:28500668

[Optimize dropping process of Ginkgo biloba dropping pills by using design space approach].

PubMed

Shen, Ji-Chen; Wang, Qing-Qing; Chen, An; Pan, Fang-Lai; Gong, Xing-Chu; Qu, Hai-Bin

2017-07-01

In this paper, a design space approach was applied to optimize the dropping process of Ginkgo biloba dropping pills. Firstly, potential critical process parameters and potential process critical quality attributes were determined through literature research and pre-experiments. Secondly, experiments were carried out according to Box-Behnken design. Then the critical process parameters and critical quality attributes were determined based on the experimental results. Thirdly, second-order polynomial models were used to describe the quantitative relationships between critical process parameters and critical quality attributes. Finally, a probability-based design space was calculated and verified. The verification results showed that efficient production of Ginkgo biloba dropping pills can be guaranteed by operating within the design space parameters. The recommended operation ranges for the critical dropping process parameters of Ginkgo biloba dropping pills were as follows: dropping distance of 5.5-6.7 cm, and dropping speed of 59-60 drops per minute, providing a reference for industrial production of Ginkgo biloba dropping pills. Copyright© by the Chinese Pharmaceutical Association.

Inactivation of the microbiota and effect on the quality attributes of pineapple juice using a continuous flow ultrasound-assisted supercritical carbon dioxide system.

PubMed

Paniagua-Martínez, I; Mulet, A; García-Alvarado, M A; Benedito, J

2018-01-01

Supercritical carbon dioxide inactivation technology represents a promising nonthermal processing method, as it causes minimum impact on the nutritional food properties. The aim of this study was to analyze the combined effect of supercritical carbon dioxide and high-power ultrasound on the inactivation of natural microbiota and the quality attributes of pineapple juice treated in a continuous flow system. Different juice residence times (3.06-4.6 min), at 100 bar and 31.5 ℃, were used. The results indicated that the microbiota inactivation was complete and the differences obtained in the quality attributes (2.2% for pH, 4.8% for °Brix, 2% for vitamin C) were minimal. During storage, microorganisms were not able to recover and the vitamin C decrease could be limited to 8.2% after four weeks. The results demonstrated that the supercritical carbon dioxide-high-power ultrasound technique could be an excellent alternative for the cold pasteurization of pineapple juice.

A Investigation of the Verbal Description of Trombone Tone Quality with Respect to Selected Attributes of Sound

NASA Astrophysics Data System (ADS)

Stroeher, Michael Steven

The purpose of this study was to determine the physical elements which experienced trombonists associate with selected descriptors in characterizing the tone quality of that instrument. Stimuli sampled from live trombone tones and synthesized into musical phrases represented 17 variations in (1) presence/absence of attack transient, (2) rise time, (3) duration, (4) number of harmonics, (5) upper limit of harmonicity, (6) spectral envelope shape, and (7) frequency. A vocabulary of 20 adjectives appropriate for describing trombone tone quality was established by a postal survey of 49 college trombone instructors. A pretest was presented to 28 University of North Texas trombone students, who rated the 17 stimuli in terms of the 20 adjectives on a Likert-type scale with reliability estimates of.8997 to.9439 (coefficient alpha). The pretest established the lack of significance of the attack transient in subjects' descriptions. Factor analysis of responses determined similarities in word usages and allowed the number of descriptors to be reduced to eight and the number of sound stimuli to nine for the final investigation. Subjects of the final study consisted of 161 trombonists at universities in Texas, Oklahoma, Colorado, Michigan and North Carolina, who rated the nine stimuli in terms of the eight chosen adjectives on Likert-type scales, with an overall reliability estimate of.7121 (coefficient alpha). Although the low reliability indicated some lack of agreement in descriptor usage, multiple regression analysis established relationships among subjects' use of descriptors and physical attributes of the stimuli. Subjects' judgements of bright were associated with tones of higher frequency; centered, good, dark and warm with faster rise time, longer duration and relatively fewer harmonics; pinched with a high number of harmonics and slower rise time; fuzzy with slow rise time and the presence of high-frequency inharmonic noise. Subjects did not use the word full with any degree of consistency.

Vaccines and Internet: characteristics of the vaccine safety net web sites and suggested improvements.

PubMed

Martínez-Mora, Marta; Alvarez-Pasquín, María José; Rodríguez-Salvanés, Francisco

2008-12-09

The Internet contains a large amount of useful information on many subjects, but also information of doubtful quality. To help identify Web sites on vaccine safety that fulfil good practice, the Global Advisory Committee on Vaccine Safety of the World Health Organization (WHO) has published criteria to which sites should adhere and a listing of Web sites that fulfil them. There are no studies describing the common attributes of these sites. To examine the attributes, design characteristics and resources of Web sites belonging to the Vaccine Safety Net (VSN) of the WHO. A cross-sectional, descriptive observational study using an evaluation questionnaire was carried out applied to the VSN web sites listed in March-April 2007. Twenty-six Web sites accredited by the VSN by April 2007 were analysed. With respect to design and quality, all sites contained information about the site manager. Postal and Email addresses were available for 84.6% of the sites. About privacy and personal data processing, 73.1% of sites specified the data protection procedure used and stated that data were not sold or passed third parties. The most-used language was English (76.9%). 96.3% of sites had links to other pro-vaccination sites and 19.2% provided the addresses of vaccination centres. 63.6% of webs were aimed at general public and health care workers but there was no clear separation of documents or different entry routes. With respect to information on vaccine safety, 84.6% of sites had information on adverse effects. In the general information section, 92.3% of sites had a new developments section. Some sites had multiple sources of financing and in 57% of sites, the financing was public. The most-important plus factors found were the transparency of financing, the lack of links to the pharmaceutical industry, the transparency of site management and responsibility and the proven scientific quality and constant updating of contents.

Geodata Modeling and Query in Geographic Information Systems

NASA Technical Reports Server (NTRS)

Adam, Nabil

1996-01-01

Geographic information systems (GIS) deal with collecting, modeling, man- aging, analyzing, and integrating spatial (locational) and non-spatial (attribute) data required for geographic applications. Examples of spatial data are digital maps, administrative boundaries, road networks, and those of non-spatial data are census counts, land elevations and soil characteristics. GIS shares common areas with a number of other disciplines such as computer- aided design, computer cartography, database management, and remote sensing. None of these disciplines however, can by themselves fully meet the requirements of a GIS application. Examples of such requirements include: the ability to use locational data to produce high quality plots, perform complex operations such as network analysis, enable spatial searching and overlay operations, support spatial analysis and modeling, and provide data management functions such as efficient storage, retrieval, and modification of large datasets; independence, integrity, and security of data; and concurrent access to multiple users. It is on the data management issues that we devote our discussions in this monograph. Traditionally, database management technology have been developed for business applications. Such applications require, among other things, capturing the data requirements of high-level business functions and developing machine- level implementations; supporting multiple views of data and yet providing integration that would minimize redundancy and maintain data integrity and security; providing a high-level language for data definition and manipulation; allowing concurrent access to multiple users; and processing user transactions in an efficient manner. The demands on database management systems have been for speed, reliability, efficiency, cost effectiveness, and user-friendliness. Significant progress have been made in all of these areas over the last two decades to the point that many generalized database platforms are now available for developing data intensive applications that run in real-time. While continuous improvement is still being made at a very fast-paced and competitive rate, new application areas such as computer aided design, image processing, VLSI design, and GIS have been identified by many as the next generation of database applications. These new application areas pose serious challenges to the currently available database technology. At the core of these challenges is the nature of data that is manipulated. In traditional database applications, the database objects do not have any spatial dimension, and as such, can be thought of as point data in a multi-dimensional space. For example, each instance of an entity EMPLOYEE will have a unique value corresponding to every attribute such as employee id, employee name, employee address and so on. Thus, every Employee instance can be thought of as a point in a multi-dimensional space where each dimension is represented by an attribute. Furthermore, all operations on such data are one-dimensional. Thus, users may retrieve all entities satisfying one or more constraints. Examples of such constraints include employees with addresses in a certain area code, or salaries within a certain range. Even though constraints can be specified on multiple attributes (dimensions), the search for such data is essentially orthogonal across these dimensions.

Technology to control variation in meat quality

USDA-ARS?s Scientific Manuscript database

Consumers have certain expectations regarding the quality of the meat they purchase. Lean color is the primary quality attribute used by consumers to make purchase decisions. Similarly, repeat purchase decisions are generally a result of eating satisfaction, which is determined by the perceived va...

Mere exposure effect: A consequence of direct and indirect fluency-preference links.

PubMed

Willems, Sylvie; Van der Linden, Martial

2006-06-01

In three experiments, picture quality between test items was manipulated to examine whether subjects' expectations about the fluency normally associated with these different stimuli might influence the effects of fluency on preference or familiarity-based recognition responses. The results showed that fluency due to pre-exposure influenced responses less when objects were presented with high picture quality, suggesting that attributions of fluency to preference and familiarity are adjusted according to expectations about the different test pictures. However, this expectations influence depended on subjects' awareness of these different quality levels. Indeed, imperceptible differences seemed not to induce expectations about the test item fluency. In this context, fluency due to both picture quality and pre-exposure influenced direct responses. Conversely, obvious, and noticed, differences in test picture quality did no affect responses, suggesting that expectations moderated attributions of fluency only when fluency normally associated with these different stimuli was perceptible but difficult to assess.

Power and the objectification of social targets.

PubMed

Gruenfeld, Deborah H; Inesi, M Ena; Magee, Joe C; Galinsky, Adam D

2008-07-01

Objectification has been defined historically as a process of subjugation whereby people, like objects, are treated as means to an end. The authors hypothesized that objectification is a response to social power that involves approaching useful social targets regardless of the value of their other human qualities. Six studies found that under conditions of power, approach toward a social target was driven more by the target's usefulness, defined in terms of the perceiver's goals, than in low-power and baseline conditions. This instrumental response to power, which was linked to the presence of an active goal, was observed using multiple instantiations of power, different measures of approach, a variety of goals, and several types of instrumental and noninstrumental target attributes. Implications for research on the psychology of power, automatic goal pursuit, and self-objectification theory are discussed.

Aggregation operators of neutrosophic linguistic numbers for multiple attribute group decision making.

PubMed

Ye, Jun

2016-01-01

Based on the concept of neutrosophic linguistic numbers (NLNs) in symbolic neutrosophic theory presented by Smarandache in 2015, the paper firstly proposes basic operational laws of NLNs and the expected value of a NLN to rank NLNs. Then, we propose the NLN weighted arithmetic average (NLNWAA) and NLN weighted geometric average (NLNWGA) operators and discuss their properties. Further, we establish a multiple attribute group decision-making (MAGDM) method by using the NLNWAA and NLNWGA operators under NLN environment. Finally, an illustrative example on a decision-making problem of manufacturing alternatives in the flexible manufacturing system is given to show the application of the proposed MAGDM method.

29 CFR 825.115 - Continuing treatment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... treatment by, a health care provider. Examples include Alzheimer's, a severe stroke, or the terminal stages of a disease. (e) Conditions requiring multiple treatments. Any period of absence to receive multiple... disease (dialysis). (f) Absences attributable to incapacity under paragraph (b) or (c) of this section...

A quality-by-design study for an immediate-release tablet platform: examining the relative impact of active pharmaceutical ingredient properties, processing methods, and excipient variability on drug product quality attributes.

PubMed

Kushner, Joseph; Langdon, Beth A; Hicks, Ian; Song, Daniel; Li, Fasheng; Kathiria, Lalji; Kane, Anil; Ranade, Gautam; Agarwal, Kam

2014-02-01

The impact of filler-lubricant particle size ratio variation (3.4-41.6) on the attributes of an immediate-release tablet was compared with the impacts of the manufacturing method used (direct compression or dry granulation) and drug loading (1%, 5%, and 25%), particle size (D[4,3]: 8-114 μm), and drug type (theophylline or ibuprofen). All batches were successfully manufactured, except for direct compression of 25% drug loading of 8 μm (D[4,3]) drug, which exhibited very poor flow properties. All manufactured tablets possessed adequate quality attributes: tablet weight uniformity <4% RSD, tablet potency: 94%-105%, content uniformity <6% RSD, acceptance value ≤ 15, solid fraction: 0.82-0.86, tensile strength >1 MPa, friability ≤ 0.2% weight loss, and disintegration time < 4 min. The filler-lubricant particle size ratio exhibited the greatest impact on blend and granulation particle size and granulation flow, whereas drug property variation dominated blend flow, ribbon solid fraction, and tablet quality attributes. Although statistically significant effects were observed, the results of this study suggest that the manufacturability and performance of this immediate-release tablet formulation is robust to a broad range of variation in drug properties, both within-grade and extra-grade excipient particle size variations, and the choice of manufacturing method. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Metatraits and assessment of attributional style.

PubMed

Chamberlain, John M; Haaga, David A F; Thorndike, Frances P; Ahrens, Anthony H

2004-11-01

Some personality trait dimensions may not be equally applicable to all people. The degree of applicability of a given trait, or traitedness, is conceptually distinct from trait level. In this study, 3 ways of assessing traitedness--interitem variance (R. F. Baumeister & D. M. Tice, 1988), scalability (K. Lanning, 1988), and construct similarity (W. F. Chaplin, 1991)--were applied to attributional style. A nonclinical sample (N = 123) completed measures of attributional style and depressive symptoms. In a series of multiple regression analyses, none of the traitedness indicators significantly moderated the relation of attributional style with depressive symptoms. The authors discuss several methodological and conceptual explanations for these null results.

DL-sQUAL: A Multiple-Item Scale for Measuring Service Quality of Online Distance Learning Programs

ERIC Educational Resources Information Center

Shaik, Naj; Lowe, Sue; Pinegar, Kem

2006-01-01

Education is a service with multiplicity of student interactions over time and across multiple touch points. Quality teaching needs to be supplemented by consistent quality supporting services for programs to succeed under the competitive distance learning landscape. ServQual and e-SQ scales have been proposed for measuring quality of traditional…

Tests to measure the quality of spermatozoa at spermiation

PubMed Central

Amann, Rupert P.

2010-01-01

This commentary is to critique the revised World Health Organization (WHO) semen analysis manual as it pertains to characteristics of a spermatozoon at spermiation. The aims of the revised WHO manual include improving the 'quality of semen analysis' without any restriction to clinical use. Furthermore, the manual states that semen analysis may be useful for (a) 'investigating male fertility status' and (b) 'monitoring spermatogenesis during and following male fertility regulation.' However, if the analysis of ejaculated spermatozoa is intended for the purposes described in (b), then cells that are abnormal at spermiation must be identified. This paper takes the position that the manual does not identify methods to estimate the quality of spermatozoa at spermiation. Instead, it uses a 'gold standard' of sperm passing through the cervical mucus or arriving near the site of fertilization. Although this standard is appropriate for drawing conclusions regarding the probability that an individual could impregnate his partner, it is not appropriate for studying illness of the testes per se. Herein, the measures of sperm quality presented in the WHO manual are critiqued with respect to the detection of spermatozoa that were abnormal at spermiation vs. those that became abnormal subsequently. Quality assessments based on the percentage of motile or 'viable' spermatozoa are meaningless. Alternative quality attributes defining spermatozoa at spermiation are presented in this paper. In conclusion, assessment of spermatozoal quality at spermiation, on the basis of quality attributes of individual ejaculated spermatozoa, is best achieved through application of (a) a new paradigm for the morphological evaluation of sperm quality and (b) modern analytical techniques to evaluate, in an adequate sample, several appropriate independent attributes in each spermatozoon in order to more accurately identify the proportion of abnormal spermatozoa. PMID:20111084

National Beef Quality Audit-2011: Survey of instrument grading assessments of beef carcass characteristics

USDA-ARS?s Scientific Manuscript database

The instrument grading assessments for the 2011 National Beef Quality Audit evaluated seasonal trends of beef carcass quality and yield attributes over the course of the year. One week of instrument grading data, HCW, gender, USDA quality grade (QG), and yield grade (YG) factors, were collected ever...

Outpatient Interventions for Adolescent Substance Abuse: A Quality of Evidence Review

ERIC Educational Resources Information Center

Becker, Sara J.; Curry, John F.

2008-01-01

Previous reviews of outpatient interventions for adolescent substance abuse have been limited in the extent to which they considered the methodological quality of individual studies. The authors assessed 31 randomized trials of outpatient interventions for adolescent substance abuse on 14 attributes of trial quality. A quality of evidence score…

Software Quality Perceptions of Stakeholders Involved in the Software Development Process

ERIC Educational Resources Information Center

Padmanabhan, Priya

2013-01-01

Software quality is one of the primary determinants of project management success. Stakeholders involved in software development widely agree that quality is important (Barney and Wohlin 2009). However, they may differ on what constitutes software quality, and which of its attributes are more important than others. Although, software quality…

Genome-wide association of meat quality traits and tenderness in swine

USDA-ARS?s Scientific Manuscript database

Pork quality has a large impact on consumer preference and perception of eating quality. A genome-wide association was performed for pork quality traits [intramuscular fat (IMF)], slice shear force (SSF), color attributes, purge, cooking loss, and pH] from 531 to 1,237 records on barrows and gilts o...

Attention to Attributes and Objects in Working Memory

PubMed Central

Cowan, Nelson; Blume, Christopher L.; Saults, J. Scott

2013-01-01

It has been debated on the basis of change-detection procedures whether visual working memory is limited by the number of objects, task-relevant attributes within those objects, or bindings between attributes. This debate, however, has been hampered by several limitations, including the use of conditions that vary between studies and the absence of appropriate mathematical models to estimate the number of items in working memory in different stimulus conditions. We re-examined working memory limits in two experiments with a wide array of conditions involving color and shape attributes, relying on a set of new models to fit various stimulus situations. In Experiment 2, a new procedure allowed identical retrieval conditions across different conditions of attention at encoding. The results show that multiple attributes compete for attention, but that retaining the binding between attributes is accomplished only by retaining the attributes themselves. We propose a theoretical account in which a fixed object capacity limit contains within it the possibility of the incomplete retention of object attributes, depending on the direction of attention. PMID:22905929

Exercise identity and attribution properties predict negative self-conscious emotions for exercise relapse.

PubMed

Flora, Parminder K; Strachan, Shaelyn M; Brawley, Lawrence R; Spink, Kevin S

2012-10-01

Research on exercise identity (EXID) indicates that it is related to negative affect when exercisers are inconsistent or relapse. Although identity theory suggests that causal attributions about this inconsistency elicit negative self-conscious emotions of shame and guilt, no EXID studies have examined this for exercise relapse. Weiner's attribution-based theory of interpersonal motivation (2010) offers a means of testing the attribution-emotion link. Using both frameworks, we examined whether EXID and attributional properties predicted negative emotions for exercise relapse. Participants (n = 224) read an exercise relapse vignette, and then completed EXID, attributions, and emotion measures. Hierarchical multiple regression models using EXID and the attributional property of controllability significantly predicted each of shame and guilt, R² adjusted = .09, ps ≤ .001. Results support identity theory suggestions and Weiner's specific attribution-emotion hypothesis. This first demonstration of an interlinking of EXID, controllability, and negative self-conscious emotions offers more predictive utility using complementary theories than either theory alone.

Identification, summary and comparison of tools used to measure organizational attributes associated with chronic disease management within primary care settings.

PubMed

Lukewich, Julia; Corbin, Renée; VanDenKerkhof, Elizabeth G; Edge, Dana S; Williamson, Tyler; Tranmer, Joan E

2014-12-01

Given the increasing emphasis being placed on managing patients with chronic diseases within primary care, there is a need to better understand which primary care organizational attributes affect the quality of care that patients with chronic diseases receive. This study aimed to identify, summarize and compare data collection tools that describe and measure organizational attributes used within the primary care setting worldwide. Systematic search and review methodology consisting of a comprehensive and exhaustive search that is based on a broad question to identify the best available evidence was employed. A total of 30 organizational attribute data collection tools that have been used within the primary care setting were identified. The tools varied with respect to overall focus and level of organizational detail captured, theoretical foundations, administration and completion methods, types of questions asked, and the extent to which psychometric property testing had been performed. The tools utilized within the Quality and Costs of Primary Care in Europe study and the Canadian Primary Health Care Practice-Based Surveys were the most recently developed tools. Furthermore, of the 30 tools reviewed, the Canadian Primary Health Care Practice-Based Surveys collected the most information on organizational attributes. There is a need to collect primary care organizational attribute information at a national level to better understand factors affecting the quality of chronic disease prevention and management across a given country. The data collection tools identified in this review can be used to establish data collection strategies to collect this important information. © 2014 The Authors. Journal of Evaluation in Clinical Practice published by John Wiley & Sons, Ltd.

A qualitative study on the attributes of nurses' workplace social capital in Japan.

PubMed

Norikoshi, Kensuke; Kobayashi, Toshio; Tabuchi, Keiji

2018-01-01

To identify attributes of nurses' workplace social capital in Japan. Much attention has been paid to nurses' workplace social capital to improve the quality of the work environment; however, few studies are available on the attributes of nurses' workplace social capital. Semi-structured interviews were conducted with 32 nurses at seven hospitals. Nurses reported on the attributes of workplace social capital, such as characteristics facilitating individual positive action in an organisation, which were qualitatively analysed using the Kawakita Jiro method. The attributes of nurses' workplace social capital were organised into six groups: affirmation; exchange of appreciation; unrestricted information sharing; ability to trust; access to the strength; and altruistic reciprocity. The attributes of nurses' workplace social capital included a social structure that allowed nurses to make full use of their abilities both vertically and horizontally and were supported by a sense of security. In particular, newly emerged exchange of appreciation and altruistic reciprocity were important for nurses in Japan in building cooperative relationships with others. Managing human relationships, such as exchange of appreciation and altruistic reciprocity, in clinical settings based on nurses' workplace social capital may promote positive emotions in the organisation, positive ideas among staff and cooperative teamwork, which may lead to high-quality patient care. © 2017 John Wiley & Sons Ltd.

Opportunities and challenges of real-time release testing in biopharmaceutical manufacturing.

PubMed

Jiang, Mo; Severson, Kristen A; Love, John Christopher; Madden, Helena; Swann, Patrick; Zang, Li; Braatz, Richard D

2017-11-01

Real-time release testing (RTRT) is defined as "the ability to evaluate and ensure the quality of in-process and/or final drug product based on process data, which typically includes a valid combination of measured material attributes and process controls" (ICH Q8[R2]). This article discusses sensors (process analytical technology, PAT) and control strategies that enable RTRT for the spectrum of critical quality attributes (CQAs) in biopharmaceutical manufacturing. Case studies from the small-molecule and biologic pharmaceutical industry are described to demonstrate how RTRT can be facilitated by integrated manufacturing and multivariable control strategies to ensure the quality of products. RTRT can enable increased assurance of product safety, efficacy, and quality-with improved productivity including faster release and potentially decreased costs-all of which improve the value to patients. To implement a complete RTRT solution, biologic drug manufacturers need to consider the special attributes of their industry, particularly sterility and the measurement of viral and microbial contamination. Continued advances in on-line and in-line sensor technologies are key for the biopharmaceutical manufacturing industry to achieve the potential of RTRT. Related article: http://onlinelibrary.wiley.com/doi/10.1002/bit.26378/full. © 2017 Wiley Periodicals, Inc.

The intersectionality of discrimination attributes and bullying among youth: an applied latent class analysis.

PubMed

Garnett, Bernice Raveche; Masyn, Katherine E; Austin, S Bryn; Miller, Matthew; Williams, David R; Viswanath, Kasisomayajula

2014-08-01

Discrimination is commonly experienced among adolescents. However, little is known about the intersection of multiple attributes of discrimination and bullying. We used a latent class analysis (LCA) to illustrate the intersections of discrimination attributes and bullying, and to assess the associations of LCA membership to depressive symptoms, deliberate self harm and suicidal ideation among a sample of ethnically diverse adolescents. The data come from the 2006 Boston Youth Survey where students were asked whether they had experienced discrimination based on four attributes: race/ethnicity, immigration status, perceived sexual orientation and weight. They were also asked whether they had been bullied or assaulted for these attributes. A total of 965 (78%) students contributed to the LCA analytic sample (45% Non-Hispanic Black, 29% Hispanic, 58% Female). The LCA revealed that a 4-class solution had adequate relative and absolute fit. The 4-classes were characterized as: low discrimination (51%); racial discrimination (33%); sexual orientation discrimination (7%); racial and weight discrimination with high bullying (intersectional class) (7%). In multivariate models, compared to the low discrimination class, individuals in the sexual orientation discrimination class and the intersectional class had higher odds of engaging in deliberate self-harm. Students in the intersectional class also had higher odds of suicidal ideation. All three discrimination latent classes had significantly higher depressive symptoms compared to the low discrimination class. Multiple attributes of discrimination and bullying co-occur among adolescents. Research should consider the co-occurrence of bullying and discrimination.

Multispectral UV imaging for fast and non-destructive quality control of chemical and physical tablet attributes.

PubMed

Klukkert, Marten; Wu, Jian X; Rantanen, Jukka; Carstensen, Jens M; Rades, Thomas; Leopold, Claudia S

2016-07-30

Monitoring of tablet quality attributes in direct vicinity of the production process requires analytical techniques that allow fast, non-destructive, and accurate tablet characterization. The overall objective of this study was to investigate the applicability of multispectral UV imaging as a reliable, rapid technique for estimation of the tablet API content and tablet hardness, as well as determination of tablet intactness and the tablet surface density profile. One of the aims was to establish an image analysis approach based on multivariate image analysis and pattern recognition to evaluate the potential of UV imaging for automatized quality control of tablets with respect to their intactness and surface density profile. Various tablets of different composition and different quality regarding their API content, radial tensile strength, intactness, and surface density profile were prepared using an eccentric as well as a rotary tablet press at compression pressures from 20MPa up to 410MPa. It was found, that UV imaging can provide both, relevant information on chemical and physical tablet attributes. The tablet API content and radial tensile strength could be estimated by UV imaging combined with partial least squares analysis. Furthermore, an image analysis routine was developed and successfully applied to the UV images that provided qualitative information on physical tablet surface properties such as intactness and surface density profiles, as well as quantitative information on variations in the surface density. In conclusion, this study demonstrates that UV imaging combined with image analysis is an effective and non-destructive method to determine chemical and physical quality attributes of tablets and is a promising approach for (near) real-time monitoring of the tablet compaction process and formulation optimization purposes. Copyright © 2015 Elsevier B.V. All rights reserved.

Addendum: Quality of Communication.

ERIC Educational Resources Information Center

Leveridge, Leo L.

1981-01-01

Replaces item 3, Treatment of Content, in "Attributes of Quality in Audiovisual Materials for Health Professionals" by Emanuel Suter and Wendy H. Waddell ("The Journal of Biocommunication," v8 n2, July 1981). (FM)

Changing culture in the home health setting: strategies for success.

PubMed

Boan, David

2006-01-01

Organizational culture is generally defined as the internal attributes of the staff, such as their values, beliefs, and attitudes. Although technically accurate as a definition, personal attributes defy direct intervention, leading some to question whether it is possible to change culture. It is proposed that it is possible to change the personal internal attributes that define organizational culture by changing the characteristic structures and behaviors of the organization that shape those attributes. This model, called the Quality Capability Model, creates an approach to culture change that accommodates the unique features of home health.

Genetic diversity provides opportunities for improvement of fresh-cut pepper quality

USDA-ARS?s Scientific Manuscript database

Extensive genetic diversity present in the Capsicum genepool has been utilized extensively to improve pepper disease resistance, fruit quality and varied yield attributes. Little attention has been dedicated to genetic enhancement of pepper fresh-cut quality. We evaluated pepper accessions with dive...

Effect of Power Ultrasound on Food Quality

NASA Astrophysics Data System (ADS)

Lee, Hyoungill; Feng, Hao

Recent food processing technology innovations have been centered around producing foods with fresh-like attributes through minimal processing or nonthermal processing technologies. Instead of using thermal energy to secure food safety that is often accompanied by quality degradation in processed foods, the newly developed processing modalities utilize other types of physical energy such as high pressure, pulsed electric field or magnetic field, ultraviolet light, or acoustic energy to process foods. An improvement in food quality by the new processing methods has been widely reported. In comparison with its low-energy (high-frequency) counterpart which finds applications in food quality inspection, the use of high-intensity ultrasound, also called power ultrasound, in food processing is a relatively new endeavor. To understand the effect of high-intensity ultrasound treatment on food quality, it is important to understand the interactions between acoustic energy and food ingredients, which is covered in Chapter 10. In this chapter, the focus will be on changes in overall food quality attributes that are caused by ultrasound, such as texture, color, flavor, and nutrients.

Promoting quality: the health-care organization from a management perspective.

PubMed

Glickman, Seth W; Baggett, Kelvin A; Krubert, Christopher G; Peterson, Eric D; Schulman, Kevin A

2007-12-01

Although agreement about the need for quality improvement in health care is almost universal, the means of achieving effective improvement in overall care is not well understood. Avedis Donabedian developed the structure-process-outcome framework in which to think about quality-improvement efforts. There is now a robust evidence-base in the quality-improvement literature on process and outcomes, but structure has received considerably less attention. The health-care field would benefit from expanding the current interpretation of structure to include broader perspectives on organizational attributes as primary determinants of process change and quality improvement. We highlight and discuss the following key elements of organizational attributes from a management perspective: (i) executive management, including senior leadership and board responsibilities (ii) culture, (iii) organizational design, (iv) incentive structures and (v) information management and technology. We discuss the relevant contributions from the business and medical literature for each element, and provide this framework as a roadmap for future research in an effort to develop the optimal definition of 'structure' for transforming quality-improvement initiatives.

[Feedforward control strategy and its application in quality improvement of ethanol precipitation process of danhong injection].

PubMed

Yan, Bin-Jun; Guo, Zheng-Tai; Qu, Hai-Bin; Zhao, Bu-Chang; Zhao, Tao

2013-06-01

In this work, a feedforward control strategy basing on the concept of quality by design was established for the manufacturing process of traditional Chinese medicine to reduce the impact of the quality variation of raw materials on drug. In the research, the ethanol precipitation process of Danhong injection was taken as an application case of the method established. Box-Behnken design of experiments was conducted. Mathematical models relating the attributes of the concentrate, the process parameters and the quality of the supernatants produced were established. Then an optimization model for calculating the best process parameters basing on the attributes of the concentrate was built. The quality of the supernatants produced by ethanol precipitation with optimized and non-optimized process parameters were compared. The results showed that using the feedforward control strategy for process parameters optimization can control the quality of the supernatants effectively. The feedforward control strategy proposed can enhance the batch-to-batch consistency of the supernatants produced by ethanol precipitation.

A systematic literature review of open source software quality assessment models.

PubMed

Adewumi, Adewole; Misra, Sanjay; Omoregbe, Nicholas; Crawford, Broderick; Soto, Ricardo

2016-01-01

Many open source software (OSS) quality assessment models are proposed and available in the literature. However, there is little or no adoption of these models in practice. In order to guide the formulation of newer models so they can be acceptable by practitioners, there is need for clear discrimination of the existing models based on their specific properties. Based on this, the aim of this study is to perform a systematic literature review to investigate the properties of the existing OSS quality assessment models by classifying them with respect to their quality characteristics, the methodology they use for assessment, and their domain of application so as to guide the formulation and development of newer models. Searches in IEEE Xplore, ACM, Science Direct, Springer and Google Search is performed so as to retrieve all relevant primary studies in this regard. Journal and conference papers between the year 2003 and 2015 were considered since the first known OSS quality model emerged in 2003. A total of 19 OSS quality assessment model papers were selected. To select these models we have developed assessment criteria to evaluate the quality of the existing studies. Quality assessment models are classified into five categories based on the quality characteristics they possess namely: single-attribute, rounded category, community-only attribute, non-community attribute as well as the non-quality in use models. Our study reflects that software selection based on hierarchical structures is found to be the most popular selection method in the existing OSS quality assessment models. Furthermore, we found that majority (47%) of the existing models do not specify any domain of application. In conclusion, our study will be a valuable contribution to the community and helps the quality assessment model developers in formulating newer models and also to the practitioners (software evaluators) in selecting suitable OSS in the midst of alternatives.

Comparing the quality of pro- and anti-vaccination online information: a content analysis of vaccination-related webpages.

PubMed

Sak, Gabriele; Diviani, Nicola; Allam, Ahmed; Schulz, Peter J

2016-01-15

The exponential increase in health-related online platforms has made the Internet one of the main sources of health information globally. The quality of health contents disseminated on the Internet has been a central focus for many researchers. To date, however, few comparative content analyses of pro- and anti-vaccination websites have been conducted, and none of them compared the quality of information. The main objective of this study was therefore to bring new evidence on this aspect by comparing the quality of pro- and anti-vaccination online sources. Based on past literature and health information quality evaluation initiatives, a 40-categories assessment tool (Online Vaccination Information Quality Codebook) was developed and used to code a sample of 1093 webpages retrieved via Google and two filtered versions of the same search engine. The categories investigated were grouped into four main quality dimensions: web-related design quality criteria (10 categories), health-specific design quality criteria (3 categories), health related content attributes (12 categories) and vaccination-specific content attributes (15 categories). Data analysis comprised frequency counts, cross tabulations, Pearson's chi-square, and other inferential indicators. The final sample included 514 webpages in favor of vaccination, 471 against, and 108 neutral. Generally, webpages holding a favorable view toward vaccination presented more quality indicators compared to both neutral and anti-vaccination pages. However, some notable exceptions to this rule were observed. In particular, no differences were found between pro- and anti-vaccination webpages as regards vaccination-specific content attributes. Our analyses showed that the overall quality of pro-vaccination webpages is superior to anti-vaccination online sources. The developed coding scheme was proven to be a helpful and reliable tool to judge the quality of vaccination-related webpages. Based on the results, we advance recommendations for online health information providers as well as directions for future research in this field.

Hemispheric Asymmetries in Price Estimation: Do Brain Hemispheres Attribute Different Monetary Values?

PubMed Central

Giuliani, Felice; D’Anselmo, Anita; Tommasi, Luca; Brancucci, Alfredo; Pietroni, Davide

2017-01-01

The Spatial Numerical Association of Response Codes (SNARC) effect has been associated with a wide range of magnitude processing. This effect is due to an implicit relationship between numbers and horizontal space, according to which weaker magnitudes and smaller numbers are represented on the left, whereas stronger magnitudes and larger numbers are represented on the right. However, for some particular type of magnitudes such as price, judgments may be also influenced by perceived quality and thus involving valence attribution biases driven by brain asymmetries. In the present study, a lateralized tachistoscopic presentation was used in a price estimation task, using a weight estimation task as a control, to assess differences in asymmetries between these two attributes. Results show a side bias in the former condition but not in the latter, thus indicating that other non-numerical mechanisms are involved in price estimation. Specifically, prices were estimated lower in the left visual field than in the right visual field. The proposed explanation is that price appraisal might involve a valence attribution mechanism leading to a better perceived quality (related to higher prices) when objects are processed primarily in the left hemisphere, and to a lower perceived quality (related to lower prices) when objects are processed primarily in the right hemisphere. PMID:29213252

Hemispheric Asymmetries in Price Estimation: Do Brain Hemispheres Attribute Different Monetary Values?

PubMed

Giuliani, Felice; D'Anselmo, Anita; Tommasi, Luca; Brancucci, Alfredo; Pietroni, Davide

2017-01-01

The Spatial Numerical Association of Response Codes (SNARC) effect has been associated with a wide range of magnitude processing. This effect is due to an implicit relationship between numbers and horizontal space, according to which weaker magnitudes and smaller numbers are represented on the left, whereas stronger magnitudes and larger numbers are represented on the right. However, for some particular type of magnitudes such as price, judgments may be also influenced by perceived quality and thus involving valence attribution biases driven by brain asymmetries. In the present study, a lateralized tachistoscopic presentation was used in a price estimation task, using a weight estimation task as a control, to assess differences in asymmetries between these two attributes. Results show a side bias in the former condition but not in the latter, thus indicating that other non-numerical mechanisms are involved in price estimation. Specifically, prices were estimated lower in the left visual field than in the right visual field. The proposed explanation is that price appraisal might involve a valence attribution mechanism leading to a better perceived quality (related to higher prices) when objects are processed primarily in the left hemisphere, and to a lower perceived quality (related to lower prices) when objects are processed primarily in the right hemisphere.

Sensory analysis and consumer acceptance of 140 high-quality extra virgin olive oils.

PubMed

Valli, Enrico; Bendini, Alessandra; Popp, Martin; Bongartz, Annette

2014-08-01

Sensory analysis is a crucial tool for evaluating the quality of extra virgin olive oils. One aim of such an investigation is to verify if the sensory attributes themselves - which are strictly related to volatile and phenolic compounds - may permit the discrimination of high-quality products obtained by olives of different cultivars and/or grown in various regions. Moreover, a crucial topic is to investigate the interdependency between relevant parameters determining consumer acceptance and objective sensory characteristics evaluated by the panel test. By statistically analysing the sensory results, a grouping - but not discriminatory - effect was shown for some cultivars and some producing areas. The preference map shows that the most appreciated samples by consumers were situated in the direction of the 'ripe fruity' and 'sweet' axis and opposite to the 'bitter' and 'other attributes' (pungent, green fruity, freshly cut grass, green tomato, harmony, persistency) axis. Extra virgin olive oils produced from olives of the same cultivars and grown in the same areas shared similar sensorial attributes. Some differences in terms of expectation and interpretation of sensory characteristics of extra virgin olive oils might be present for consumers and panellists: most of the consumers appear unfamiliar with positive sensorial attributes, such as bitterness and pungency. © 2013 Society of Chemical Industry.

Colour and in vitro quality attributes of walnuts from different growing conditions correlate with key precursors of primary and secondary metabolism.

PubMed

Fuentealba, Claudia; Hernández, Ignacia; Saa, Sebastian; Toledo, Lea; Burdiles, Pamela; Chirinos, Rosana; Campos, David; Brown, Patrick; Pedreschi, Romina

2017-10-01

Walnuts (Juglans regia L.) are well known for their flavour, nutritional and health properties. The light colour of walnuts is a quality attribute that leads to consumer preference. The aim of this study was to correlate attributes such as colour and antioxidant capacity with the precursors of primary and secondary metabolism. Two growing areas and four different colours of walnuts cv. Chandler from the central region of Chile were evaluated. Walnuts grown in the zone with Andes Mountains influence showed higher (p<0.05) sugar and unsaturated fatty acid contents, which could be attributed to lower minimum temperatures during seed filling. Extra light walnuts had higher (p<0.05) total phenolic compounds, antioxidant capacity and arbutin levels than amber walnuts. To the best of our knowledge, this is the first time that arbutin has been reported in walnuts and could provide the first insight into how enzymatic browning is prevented in the Chandler cultivar. Copyright © 2017 Elsevier Ltd. All rights reserved.

Where's the beef? Retail channel choice and beef preferences in Argentina.

PubMed

Colella, Florencia; Ortega, David L

2017-11-01

Argentinean beef is recognized and demanded internationally. Locally, consumers are often unable to afford certified beef products, and may rely on external cues to determine beef quality. Uncovering demand for beef attributes and marketing them accordingly, may require an understanding of consumers' product purchasing strategies, which involves retailer choice. We develop a framework utilizing latent class analysis to identify consumer groups with different retailer preferences, and separately estimate their demand for beef product attributes. This framework accounts for the interrelationship between consumers' choice of retail outlets and beef product preferences. Our analysis of data from the city of Buenos Aires identifies two groups of consumers, a convenience- (67%) and a service- (33%) oriented group. We find significant differences in demand for beef attributes across these groups, and find that the service oriented group, while not willing to pay for credence attributes, relies on a service-providing retailer-namely a butcher-as a source of product quality assurance. Copyright © 2017. Published by Elsevier Ltd.

Ozone Air Quality over North America: Part II-An Analysis of Trend Detection and Attribution Techniques.

PubMed

Porter, P Steven; Rao, S Trivikrama; Zurbenko, Igor G; Dunker, Alan M; Wolff, George T

2001-02-01

Assessment of regulatory programs aimed at improving ambient O 3 air quality is of considerable interest to the scientific community and to policymakers. Trend detection, the identification of statistically significant long-term changes, and attribution, linking change to specific clima-tological and anthropogenic forcings, are instrumental to this assessment. Detection and attribution are difficult because changes in pollutant concentrations of interest to policymakers may be much smaller than natural variations due to weather and climate. In addition, there are considerable differences in reported trends seemingly based on similar statistical methods and databases. Differences arise from the variety of techniques used to reduce nontrend variation in time series, including mitigating the effects of meteorology and the variety of metrics used to track changes. In this paper, we review the trend assessment techniques being used in the air pollution field and discuss their strengths and limitations in discerning and attributing changes in O 3 to emission control policies.

Cultural affiliation and the importance of health care attributes. Marketers can develop segmentation strategies for targeted patient groups.

PubMed

Dolinsky, A L; Stinerock, R

1998-01-01

Culturally based values are known to influence consumer purchase decisions, but little is known about how those values affect health care choices. To rectify that situation and provide health care marketers with a framework for developing culturally based segmentation strategies, the authors undertook an exploratory research project in which Hispanic-, African-, and Anglo-Americans were asked to rate the importance of 16 different health care attributes. Those attributes can be grouped under five categories: quality of physician, quality of nurses and other medical staff, economic issues, access to health care, and nonmedically related experiential aspects. Survey responses identified distinct differences in the importance attached to the various attributes by the three cultural groups. The study also looks at the impact of six demographic and social characteristics on the evaluations made by each cultural group. Those characteristics are educational level, gender, age, health status, marital status, and number of people living in the household.

47 CFR 73.3555 - Multiple ownership.

Code of Federal Regulations, 2010 CFR

2010-10-01

... vertical ownership chain and application of the relevant attribution benchmark to the resulting product, except that wherever the ownership percentage for any link in the chain exceeds 50%, it shall not be... multiplication of the ownership percentages for each link in the vertical ownership chain and application of the...

47 CFR 73.3555 - Multiple ownership.

Code of Federal Regulations, 2011 CFR

2011-10-01

... vertical ownership chain and application of the relevant attribution benchmark to the resulting product, except that wherever the ownership percentage for any link in the chain exceeds 50%, it shall not be... multiplication of the ownership percentages for each link in the vertical ownership chain and application of the...

47 CFR 73.3555 - Multiple ownership.

Code of Federal Regulations, 2014 CFR

2014-10-01

... vertical ownership chain and application of the relevant attribution benchmark to the resulting product, except that wherever the ownership percentage for any link in the chain exceeds 50%, it shall not be... multiplication of the ownership percentages for each link in the vertical ownership chain and application of the...

47 CFR 73.3555 - Multiple ownership.

Code of Federal Regulations, 2012 CFR

2012-10-01

... vertical ownership chain and application of the relevant attribution benchmark to the resulting product, except that wherever the ownership percentage for any link in the chain exceeds 50%, it shall not be... multiplication of the ownership percentages for each link in the vertical ownership chain and application of the...

47 CFR 73.3555 - Multiple ownership.

Code of Federal Regulations, 2013 CFR

2013-10-01

... vertical ownership chain and application of the relevant attribution benchmark to the resulting product, except that wherever the ownership percentage for any link in the chain exceeds 50%, it shall not be... multiplication of the ownership percentages for each link in the vertical ownership chain and application of the...

Improving the Accuracy of Attribute Extraction using the Relatedness between Attribute Values

NASA Astrophysics Data System (ADS)

Bollegala, Danushka; Tani, Naoki; Ishizuka, Mitsuru

Extracting attribute-values related to entities from web texts is an important step in numerous web related tasks such as information retrieval, information extraction, and entity disambiguation (namesake disambiguation). For example, for a search query that contains a personal name, we can not only return documents that contain that personal name, but if we have attribute-values such as the organization for which that person works, we can also suggest documents that contain information related to that organization, thereby improving the user's search experience. Despite numerous potential applications of attribute extraction, it remains a challenging task due to the inherent noise in web data -- often a single web page contains multiple entities and attributes. We propose a graph-based approach to select the correct attribute-values from a set of candidate attribute-values extracted for a particular entity. First, we build an undirected weighted graph in which, attribute-values are represented by nodes, and the edge that connects two nodes in the graph represents the degree of relatedness between the corresponding attribute-values. Next, we find the maximum spanning tree of this graph that connects exactly one attribute-value for each attribute-type. The proposed method outperforms previously proposed attribute extraction methods on a dataset that contains 5000 web pages.

Quality by design approach for understanding the critical quality attributes of cyclosporine ophthalmic emulsion.

PubMed

Rahman, Ziyaur; Xu, Xiaoming; Katragadda, Usha; Krishnaiah, Yellela S R; Yu, Lawrence; Khan, Mansoor A

2014-03-03

Restasis is an ophthalmic cyclosporine emulsion used for the treatment of dry eye syndrome. There are no generic products for this product, probably because of the limitations on establishing in vivo bioequivalence methods and lack of alternative in vitro bioequivalence testing methods. The present investigation was carried out to understand and identify the appropriate in vitro methods that can discriminate the effect of formulation and process variables on critical quality attributes (CQA) of cyclosporine microemulsion formulations having the same qualitative (Q1) and quantitative (Q2) composition as that of Restasis. Quality by design (QbD) approach was used to understand the effect of formulation and process variables on critical quality attributes (CQA) of cyclosporine microemulsion. The formulation variables chosen were mixing order method, phase volume ratio, and pH adjustment method, while the process variables were temperature of primary and raw emulsion formation, microfluidizer pressure, and number of pressure cycles. The responses selected were particle size, turbidity, zeta potential, viscosity, osmolality, surface tension, contact angle, pH, and drug diffusion. The selected independent variables showed statistically significant (p < 0.05) effect on droplet size, zeta potential, viscosity, turbidity, and osmolality. However, the surface tension, contact angle, pH, and drug diffusion were not significantly affected by independent variables. In summary, in vitro methods can detect formulation and manufacturing changes and would thus be important for quality control or sameness of cyclosporine ophthalmic products.

Definition, willingness-to-pay, and ranking of quality attributes of U.S. pork as defined by importers in Asia and Mexico.

PubMed

Murphy, R G L; Howard, S T; Woerner, D R; Pendell, D L; Dixon, C L; Desimone, T L; Green, M D; Igo, J L; Tatum, J D; Belk, K E

2015-01-01

A survey was conducted from November 2009 to April 2010 to determine how importers of pork define 7 predetermined quality categories (food safety, customer service, eating quality, product specification, packaging, visual characteristics, and production history) and to estimate willingness-to-pay (WTP) and establish best-worst (B/W) scaling (rank) for the 7 quality categories. Interviews were conducted in Hong Kong/China (n = 83), Japan (n = 48), Mexico (n = 70) and Russia (n = 54) with importers of U.S. pork or those who had purchased U.S. pork from distributors in the last 3 yr. Interviews used dynamic routing software and were structured such that economic factors for purchase were addressed first, allowing all responses to focus on quality. Questions about WTP and B/W were asked and then each respondent was asked to define what each quality category meant to them. Generalized linear mixed models were used to analyze frequency data. Over 70% of interviewees in Hong Kong/China, Japan, and Mexico responded that purchase price was influential in deciding whether or not to purchase imported pork. This number was lower in Russia, where respondents stated tariff rates were also important, indicating market access was a larger issue in Russia. Food safety was the most important quality category (price was not included as a part of quality) for imported pork followed by specifications. Respondents indicated some form of government inspection was how they defined food safety, whereas product size, weight, and subcutaneous fat were all included in the definition of specifications. Interviewees were more likely to pay premiums for customer service and less likely to pay premiums for packaging (P < 0.05). The premiums that were willing to be paid for guarantees of quality for imported pork variety meats were numerically lower than for whole muscle cuts or processed products. A guarantee associated with food safety of processed pork products was found to be the quality attribute for which importers would be willing to pay the highest premium. Production history was found to be the least important quality attribute for importers of all types of U.S. pork, except those in Japan. Exporters could increase profitability if a guarantee of customer service was made. Price, tariffs, and exchange rates are important to pork importers; these results indicated that if certain quality attributes could be guaranteed, exporters could increase profitability.

The mouthfeel of white wine.

PubMed

Gawel, Richard; Smith, Paul A; Cicerale, Sara; Keast, Russell

2017-07-05

White wine mouthfeel which encompasses the tactile, chemosensory and taste attributes of perceived viscosity, astringency, hotness and bitterness is increasingly being recognized as an important component of overall white wine quality. This review summarizes the physiological basis for the perception of white wine mouthfeel and the direct and interactive effects of white wine composition, specifically those of low molecular weight phenolic compounds, polysaccharides, pH, ethanol, glycerol, dissolved carbon dioxide, and peptides. Ethyl alcohol concentration and pH play a direct role in determining most aspects of mouthfeel perception, and provide an overall framework on which the other minor wine components can interact to influence white wine mouthfeel. Phenolic compounds broadly impact on the mouthfeel by contributing to its viscosity, astringency, hotness and bitterness. Their breadth of influence likely results from their structural diversity which would allow them to activate multiple sensory mechanisms involved in mouthfeel perception. Conversely, polysaccharides have a small modulating effect on astringency and hotness perception, and glycerol does not affect perceived viscosity within the narrow concentration range found in white wine. Many of the major sensory attributes that contribute to the overall impression of mouthfeel are elicited by more than one class compound suggesting that different physiological mechanisms may be involved in the construct of mouthfeel percepts.

Starch--value addition by modification.

PubMed

Tharanathan, Rudrapatnam N

2005-01-01

Starch is one of the most important but flexible food ingredients possessing value added attributes for innumerable industrial applications. Its various chemically modified derivatives offer a great scope of high technological value in both food and non-food industries. Modified starches are designed to overcome one or more of the shortcomings, such as loss of viscosity and thickening power upon cooking and storage, particularly at low pH, retrogradation characteristics, syneresis, etc., of native starches. Oxidation, esterification, hydroxyalkylation, dextrinization, and cross-linking are some of the modifications commonly employed to prepare starch derivatives. In a way, starch modification provides desirable functional attributes as well as offering economic alternative to other hydrocolloid ingredients, such as gums and mucilages, which are unreliable in quality and availability. Resistant starch, a highly retrograded starch fractionformed upon food processing, is another useful starch derivative. It exhibits the beneficial physiological effects of therapeutic and nutritional values akin to dietary fiber. There awaits considerable opportunity for future developments, especially for tailor-made starch derivatives with multiple modifications and with the desired functional and nutritional properties, although the problem of obtaining legislative approval for the use of novel starch derivatives in processed food formulations is still under debate. Nevertheless, it can be predicted that new ventures in starch modifications and their diverse applications will continue to be of great interest in applied research.

Photochemical grid model implementation and application of ...

EPA Pesticide Factsheets

For the purposes of developing optimal emissions control strategies, efficient approaches are needed to identify the major sources or groups of sources that contribute to elevated ozone (O3) concentrations. Source-based apportionment techniques implemented in photochemical grid models track sources through the physical and chemical processes important to the formation and transport of air pollutants. Photochemical model source apportionment has been used to track source impacts of specific sources, groups of sources (sectors), sources in specific geographic areas, and stratospheric and lateral boundary inflow on O3. The implementation and application of a source apportionment technique for O3 and its precursors, nitrogen oxides (NOx) and volatile organic compounds (VOCs), for the Community Multiscale Air Quality (CMAQ) model are described here. The Integrated Source Apportionment Method (ISAM) O3 approach is a hybrid of source apportionment and source sensitivity in that O3 production is attributed to precursor sources based on O3 formation regime (e.g., for a NOx-sensitive regime, O3 is apportioned to participating NOx emissions). This implementation is illustrated by tracking multiple emissions source sectors and lateral boundary inflow. NOx, VOC, and O3 attribution to tracked sectors in the application are consistent with spatial and temporal patterns of precursor emissions. The O3 ISAM implementation is further evaluated through comparisons of apportioned am

Multi-Attribute Tradespace Exploration in Space System Design

NASA Astrophysics Data System (ADS)

Ross, A. M.; Hastings, D. E.

2002-01-01

The complexity inherent in space systems necessarily requires intense expenditures of resources both human and monetary. The high level of ambiguity present in the early design phases of these systems causes long, highly iterative, and costly design cycles. This paper looks at incorporating decision theory methods into the early design processes to streamline communication of wants and needs among stakeholders and between levels of design. Communication channeled through formal utility interviews and analysis enables engineers to better understand the key drivers for the system and allows a more thorough exploration of the design tradespace. Multi-Attribute Tradespace Exploration (MATE), an evolving process incorporating decision theory into model and simulation- based design, has been applied to several space system case studies at MIT. Preliminary results indicate that this process can improve the quality of communication to more quickly resolve project ambiguity, and enable the engineer to discover better value designs for multiple stakeholders. MATE is also being integrated into a concurrent design environment to facilitate the transfer knowledge of important drivers into higher fidelity design phases. Formal utility theory provides a mechanism to bridge the language barrier between experts of different backgrounds and differing needs (e.g. scientists, engineers, managers, etc). MATE with concurrent design couples decision makers more closely to the design, and most importantly, maintains their presence between formal reviews.

An Improved Artificial Bee Colony-Based Approach for Zoning Protected Ecological Areas

PubMed Central

Shao, Jing; Yang, Lina; Peng, Ling; Chi, Tianhe; Wang, Xiaomeng

2015-01-01

China is facing ecological and environmental challenges as its urban growth rate continues to rise, and zoning protected ecological areas is recognized as an effective response measure. Zoning inherently involves both site attributes and aggregation attributes, and the combination of mathematical models and heuristic algorithms have proven advantageous. In this article, an improved artificial bee colony (IABC)-based approach is proposed for zoning protected ecological areas at a regional scale. Three main improvements were made: the first is the use of multiple strategies to generate the initial bee population of a specific quality and diversity, the second is an exploitation search procedure to generate neighbor solutions combining “replace” and “alter” operations, and the third is a “swap” strategy to enable a local search for the iterative optimal solution. The IABC algorithm was verified using simulated data. Then it was applied to define an optimum scheme of protected ecological areas of Sanya (in the Hainan province of China), and a reasonable solution was obtained. Finally, a comparison experiment with other methods (agent-based land allocation model, ant colony optimization, and density slicing) was conducted and demonstrated that the IABC algorithm was more effective and efficient than the other methods. Through this study, we aimed to provide a scientifically sound, practical approach for zoning procedures. PMID:26394148

Attributes Affecting Computer-Aided Decision Making--A Literature Survey.

ERIC Educational Resources Information Center

Moldafsky, Neil I; Kwon, Ik-Whan

1994-01-01

Reviews current literature about personal, demographic, situational, and cognitive attributes that affect computer-aided decision making. The effectiveness of computer-aided decision making is explored in relation to decision quality, effectiveness, and confidence. Studies of the effects of age, anxiety, cognitive type, attitude, gender, and prior…

Inheritance of fresh-cut fruit quality attributes in Capsicum

USDA-ARS?s Scientific Manuscript database

The fresh-cut fruit and vegetable industry has expanded rapidly during the past decade, due to freshness, convenience and the high nutrition that fresh-cut produce offers to consumers. The current report evaluates the inheritance of postharvest attributes that contribute to pepper fresh-cut product...

Continuing multiplication of Salmonella Enteritidis strains in egg yolk during refrigeration at 7.2° C

USDA-ARS?s Scientific Manuscript database

The continuing attribution of human illness caused by Salmonella Enteritidis (SE) to the consumption of contaminated eggs has led to widespread implementation of risk reduction programs for commercial egg production. Prompt refrigeration of eggs to prevent bacterial multiplication to dangerously hig...

Gifts of the Spirit: Multiple Intelligences in Religious Education.

ERIC Educational Resources Information Center

Nuzzi, Ronald

This book provides practical direction for religious educators in teaching heterogeneous groups of learners by employing a broad range of teaching and learning approaches. The booklet explains the attributes of multiple intelligence theory, including the seven types of intelligence, and provides suggestions for engaging students in each…

An Exploration of Multiple Channel Evaluations in Attributions of Deception.

DTIC Science & Technology

1980-11-24

11. REVIEW OF THE RELATED LITERATURE.................1 An Overview of Human Communication Theory Relating to Detecting Deception...Hocking, "The Truth-Deception Attribution: Effects of Familiarity onl tile Ability of Observers to Detect Deception," Human Communication Research...behavior. An Overview of Human Communication Theory Relating to Detecting Deception While it is impossible to cover all the related literature on human

Diverse expected gradient active learning for relative attributes.

PubMed

You, Xinge; Wang, Ruxin; Tao, Dacheng

2014-07-01

The use of relative attributes for semantic understanding of images and videos is a promising way to improve communication between humans and machines. However, it is extremely labor- and time-consuming to define multiple attributes for each instance in large amount of data. One option is to incorporate active learning, so that the informative samples can be actively discovered and then labeled. However, most existing active-learning methods select samples one at a time (serial mode), and may therefore lose efficiency when learning multiple attributes. In this paper, we propose a batch-mode active-learning method, called diverse expected gradient active learning. This method integrates an informativeness analysis and a diversity analysis to form a diverse batch of queries. Specifically, the informativeness analysis employs the expected pairwise gradient length as a measure of informativeness, while the diversity analysis forces a constraint on the proposed diverse gradient angle. Since simultaneous optimization of these two parts is intractable, we utilize a two-step procedure to obtain the diverse batch of queries. A heuristic method is also introduced to suppress imbalanced multiclass distributions. Empirical evaluations of three different databases demonstrate the effectiveness and efficiency of the proposed approach.

Diverse Expected Gradient Active Learning for Relative Attributes.

PubMed

You, Xinge; Wang, Ruxin; Tao, Dacheng

2014-06-02

The use of relative attributes for semantic understanding of images and videos is a promising way to improve communication between humans and machines. However, it is extremely labor- and time-consuming to define multiple attributes for each instance in large amount of data. One option is to incorporate active learning, so that the informative samples can be actively discovered and then labeled. However, most existing active-learning methods select samples one at a time (serial mode), and may therefore lose efficiency when learning multiple attributes. In this paper, we propose a batch-mode active-learning method, called Diverse Expected Gradient Active Learning (DEGAL). This method integrates an informativeness analysis and a diversity analysis to form a diverse batch of queries. Specifically, the informativeness analysis employs the expected pairwise gradient length as a measure of informativeness, while the diversity analysis forces a constraint on the proposed diverse gradient angle. Since simultaneous optimization of these two parts is intractable, we utilize a two-step procedure to obtain the diverse batch of queries. A heuristic method is also introduced to suppress imbalanced multi-class distributions. Empirical evaluations of three different databases demonstrate the effectiveness and efficiency of the proposed approach.

How Should Quality of Education Be Re-Defined for Education Achievements in Tanzania? What Are Stakeholders' Opinions?

ERIC Educational Resources Information Center

Telli, Godfrey

2013-01-01

Quality of education is a complex concept. Numerous studies attribute quality of education as an inclusive term that contains access and input on the one hand and process, output or outcome on the other. Others regard access and input of education as separate but equally important concepts of quality of education. For the latter, quality of…

Quantification of the impact of macrophytes on oxygen dynamics and nitrogen retention in a vegetated lowland river

NASA Astrophysics Data System (ADS)

Desmet, N. J. S.; Van Belleghem, S.; Seuntjens, P.; Bouma, T. J.; Buis, K.; Meire, P.

When macrophytes are growing in the river, the vegetation induces substantial changes to the water quality. Some effects are the result of direct interactions, such as photosynthetic activity or nutrient uptake, whereas others may be attributed to indirect effects of the water plants on hydrodynamics and river processes. This research focused on the direct effect of macrophytes on oxygen dynamics and nutrient cycling. Discharge, macrophyte biomass density, basic water quality, dissolved oxygen and nutrient concentrations were in situ monitored throughout the year in a lowland river (Nete catchment, Belgium). In addition, various processes were investigated in more detail in multiple ex situ experiments. The field and aquaria measurement results clearly demonstrated that aquatic plants can exert considerable impact on dissolved oxygen dynamics in a lowland river. When the river was dominated by macrophytes, dissolved oxygen concentrations varied from 5 to 10 mg l -1. Considering nutrient retention, it was shown that the investigated in-stream macrophytes could take up dissolved inorganic nitrogen (DIN) from the water column at rates of 33-50 mg N kgdry matter-1 h. And DIN fluxes towards the vegetation were found to vary from 0.03 to 0.19 g N ha -1 h -1 in spring and summer. Compared to the measured changes in DIN load over the river stretch, it means that about 3-13% of the DIN retention could be attributed to direct nitrogen uptake from the water by macrophytes. Yet, the role of macrophytes in rivers should not be underrated as aquatic vegetation also exerts considerable indirect effects that may have a greater impact than the direct fixation of nutrients into the plant biomass.

Primary care quality between Traditional Tibetan Medicine and Western Medicine Hospitals: a pilot assessment in Tibet.

PubMed

Wang, Wenhua; Shi, Leiyu; Yin, Aitian; Mao, Zongfu; Maitland, Elizabeth; Nicholas, Stephen; Liu, Xiaoyun

2015-05-14

This paper assesses both patients' perspectives on the differences in primary care quality between traditional Tibetan medicine (TTM) hospitals and western medicine (WM) hospitals and the efficacy of the government's investment in these two Prefecture-level primary care structures in Tibet. A validated Tibetan version of the Primary Care Assessment Tool (PCAT-T) was used to collect data on 692 patients aged over 18 years old, who reported the sampling site was their regular source of health care. T-tests were performed to compare the separate and total primary care attributes between WM hospitals and TTM hospitals. Multiple linear regression analysis was conducted to examine the association of the health care setting with primary care attributes while controlling for socio-demographic, health service use and health status characteristics. Compared to WM hospitals, the results showed that TTM hospitals had patients who were older (15.8 % versus 8.4 % over 60 years); with lower education levels (66.0 % versus 35.8 % with below junior high school ) and income levels (46.9 % versus 26.5 % with annual household income below 30,000RMB); more likely to be married (79.2 % versus 60.5 %); made less frequent health care visits; and had higher self-rated health status. Overall, patients assessed the primary care performance in TTM hospitals significantly higher (80.0) than WM hospitals (74.63). There were no differences in health care assessment by patient gender, age, income, education, marital status and occupation. TTM patients reported better primary care experiences than patients using WM hospitals, which validated the government's investment in traditional Tibetan medicine.

Illness Perception of Patients with Functional Gastrointestinal Disorders.

PubMed

Xiong, Na-Na; Wei, Jing; Ke, Mei-Yun; Hong, Xia; Li, Tao; Zhu, Li-Ming; Sha, Yue; Jiang, Jing; Fischer, Felix

2018-01-01

To investigate the illness perception characteristics of Chinese patients with functional gastrointestinal disorders (FGID), and the mediating role between symptoms, psychopathology, and clinical outcomes. Six illness groups from four outpatient departments of a general hospital in China were recruited, including the FGID patient group. The modified and validated Chinese version of the illness perception questionnaire-revised was utilized, which contained three sections: symptom identity, illness representation, and causes. The 12-item short-form health survey was utilized to reflect the physical and mental health-related quality of life (HRQoL). The Toronto alexithymia scale was used to measure the severity of alexithymia. Additional behavioral outcome about the frequency of doctor visits in the past 12 months was measured. Pathway analyses with multiple-group comparisons were conducted to test the mediating role of illness perception. Overall, 600 patients were recruited. The illness perceptions of FGID patients were characterized as with broad non-gastrointestinal symptoms (6.8 ± 4.2), a negative illness representation (more chronic course, worse consequences, lower personal and treatment control, lower illness coherence, and heavier emotional distress), and high numbers of psychological and culture-specific attributions. Fit indices of the three hypothesized path models (for physical and mental HRQoL and doctor-visit frequency, respectively) supported the mediating role of illness perceptions. For example, the severity of alexithymia and non-gastrointestinal symptoms had significant negative effect on mental quality of life through both direct (standardized effect: -0.085 and -0.233) and indirect (standardized effect: -0.045 and -0.231) influence via subscales of consequences, emotional representation, and psychological and risk factor attributions. Multi-group confirmatory factor analysis showed similar psychometric properties for FGID patients and the other disease group. The management of FGID patients should take into consideration dysfunctional illness perceptions, non-gastrointestinal symptoms, and emotion regulation.

Perceptual structure of adductor spasmodic dysphonia and its acoustic correlates.

PubMed

Cannito, Michael P; Doiuchi, Maki; Murry, Thomas; Woodson, Gayle E

2012-11-01

To examine the perceptual structure of voice attributes in adductor spasmodic dysphonia (ADSD) before and after botulinum toxin treatment and identify acoustic correlates of underlying perceptual factors. Reliability of perceptual judgments is considered in detail. Pre- and posttreatment trial with comparison to healthy controls, using single-blind randomized listener judgments of voice qualities, as well as retrospective comparison with acoustic measurements. Oral readings were recorded from 42 ADSD speakers before and after treatment as well as from their age- and sex-matched controls. Experienced judges listened to speech samples and rated attributes of overall voice quality, breathiness, roughness, and brokenness, using computer-implemented visual analog scaling. Data were adjusted for regression to the mean and submitted to principal components factor analysis. Acoustic waveforms, extracted from the reading samples, were analyzed and measurements correlated with perceptual factor scores. Four reliable perceptual variables of ADSD voice were effectively reduced to two underlying factors that corresponded to hyperadduction, most strongly associated with roughness, and hypoadduction, most strongly associated with breathiness. After treatment, the hyperadduction factor improved, whereas the hypoadduction factor worsened. Statistically significant (P<0.01) correlations were observed between perceived roughness and four acoustic measures, whereas breathiness correlated with aperiodicity and cepstral peak prominence (CPPs). This study supported a two-factor model of ADSD, suggesting perceptual characterization by both hyperadduction and hypoadduction before and after treatment. Responses of the factors to treatment were consistent with previous research. Correlations among perceptual and acoustic variables suggested that multiple acoustic features contributed to the overall impression of roughness. Although CPPs appears to be a partial correlate of perceived breathiness, a physical basis of this percept remained less clear. Copyright © 2012 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

Merging information from multi-model flood projections in a hierarchical Bayesian framework

NASA Astrophysics Data System (ADS)

Le Vine, Nataliya

2016-04-01

Multi-model ensembles are becoming widely accepted for flood frequency change analysis. The use of multiple models results in large uncertainty around estimates of flood magnitudes, due to both uncertainty in model selection and natural variability of river flow. The challenge is therefore to extract the most meaningful signal from the multi-model predictions, accounting for both model quality and uncertainties in individual model estimates. The study demonstrates the potential of a recently proposed hierarchical Bayesian approach to combine information from multiple models. The approach facilitates explicit treatment of shared multi-model discrepancy as well as the probabilistic nature of the flood estimates, by treating the available models as a sample from a hypothetical complete (but unobserved) set of models. The advantages of the approach are: 1) to insure an adequate 'baseline' conditions with which to compare future changes; 2) to reduce flood estimate uncertainty; 3) to maximize use of statistical information in circumstances where multiple weak predictions individually lack power, but collectively provide meaningful information; 4) to adjust multi-model consistency criteria when model biases are large; and 5) to explicitly consider the influence of the (model performance) stationarity assumption. Moreover, the analysis indicates that reducing shared model discrepancy is the key to further reduction of uncertainty in the flood frequency analysis. The findings are of value regarding how conclusions about changing exposure to flooding are drawn, and to flood frequency change attribution studies.

Statistical modeling methods to analyze the impacts of multiunit process variability on critical quality attributes of Chinese herbal medicine tablets.

PubMed

Sun, Fei; Xu, Bing; Zhang, Yi; Dai, Shengyun; Yang, Chan; Cui, Xianglong; Shi, Xinyuan; Qiao, Yanjiang

2016-01-01

The quality of Chinese herbal medicine tablets suffers from batch-to-batch variability due to a lack of manufacturing process understanding. In this paper, the Panax notoginseng saponins (PNS) immediate release tablet was taken as the research subject. By defining the dissolution of five active pharmaceutical ingredients and the tablet tensile strength as critical quality attributes (CQAs), influences of both the manipulated process parameters introduced by an orthogonal experiment design and the intermediate granules' properties on the CQAs were fully investigated by different chemometric methods, such as the partial least squares, the orthogonal projection to latent structures, and the multiblock partial least squares (MBPLS). By analyzing the loadings plots and variable importance in the projection indexes, the granule particle sizes and the minimal punch tip separation distance in tableting were identified as critical process parameters. Additionally, the MBPLS model suggested that the lubrication time in the final blending was also important in predicting tablet quality attributes. From the calculated block importance in the projection indexes, the tableting unit was confirmed to be the critical process unit of the manufacturing line. The results demonstrated that the combinatorial use of different multivariate modeling methods could help in understanding the complex process relationships as a whole. The output of this study can then be used to define a control strategy to improve the quality of the PNS immediate release tablet.

Global and regional trends in particulate air pollution and attributable health burden over the past 50 years

NASA Astrophysics Data System (ADS)

Butt, E. W.; Turnock, S. T.; Rigby, R.; Reddington, C. L.; Yoshioka, M.; Johnson, J. S.; Regayre, L. A.; Pringle, K. J.; Mann, G. W.; Spracklen, D. V.

2017-10-01

Long-term exposure to ambient particulate matter (PM2.5, mass of particles with an aerodynamic dry diameter of < 2.5 μm) is a major risk factor to the global burden of disease. Previous studies have focussed on present day or future health burdens attributed to ambient PM2.5. Few studies have estimated changes in PM2.5 and attributable health burdens over the last few decades, a period where air quality has changed rapidly. Here we used the HadGEM3-UKCA coupled chemistry-climate model, integrated exposure-response relationships, demographic and background disease data to provide the first estimate of the changes in global and regional ambient PM2.5 concentrations and attributable health burdens over the period 1960 to 2009. Over this period, global mean population-weighted PM2.5 concentrations increased by 38%, dominated by increases in China and India. Global attributable deaths increased by 89% to 124% over the period 1960 to 2009, dominated by large increases in China and India. Population growth and ageing contributed mostly to the increases in attributable deaths in China and India, highlighting the importance of demographic trends. In contrast, decreasing PM2.5 concentrations and background disease dominated the reduction in attributable health burden in Europe and the United States. Our results shed light on how future projected trends in demographics and uncertainty in the exposure-response relationship may provide challenges for future air quality policy in Asia.

Improving food safety within the dairy chain: an application of conjoint analysis.

PubMed

Valeeva, N I; Meuwissen, M P M; Lansink, A G J M Oude; Huirne, R B M

2005-04-01

This study determined the relative importance of attributes of food safety improvement in the production chain of fluid pasteurized milk. The chain was divided into 4 blocks: "feed" (compound feed production and its transport), "farm" (dairy farm), "dairy processing" (transport and processing of raw milk, delivery of pasteurized milk), and "consumer" (retailer/catering establishment and pasteurized milk consumption). The concept of food safety improvement focused on 2 main groups of hazards: chemical (antibiotics and dioxin) and microbiological (Salmonella, Escherichia coli, Mycobacterium paratuberculosis, and Staphylococcus aureus). Adaptive conjoint analysis was used to investigate food safety experts' perceptions of the attributes' importance. Preference data from individual experts (n = 24) on 101 attributes along the chain were collected in a computer-interactive mode. Experts perceived the attributes from the "feed" and "farm" blocks as being more vital for controlling the chemical hazards; whereas the attributes from the "farm" and "dairy processing" were considered more vital for controlling the microbiological hazards. For the chemical hazards, "identification of treated cows" and "quality assurance system of compound feed manufacturers" were considered the most important attributes. For the microbiological hazards, these were "manure supply source" and "action in salmonellosis and M. paratuberculosis cases". The rather high importance of attributes relating to quality assurance and traceability systems of the chain participants indicates that participants look for food safety assurance from the preceding participants. This information has substantial decision-making implications for private businesses along the chain and for the government regarding the food safety improvement of fluid pasteurized milk.

Video or In-Clinic Consultation? Selection of Attributes as Preparation for a Discrete Choice Experiment Among Key Stakeholders.

PubMed

Chudner, Irit; Goldfracht, Margalit; Goldblatt, Hadass; Drach-Zahavy, Anat; Karkabi, Khaled

2018-06-09

Video consultations (VCs) provide increased accessibility of primary care to remote areas and overall improved care for chronic patients. They also contribute to higher patient satisfaction and improved resource management. Despite these benefits, VC integration into the health system is complex and slow. Understanding the VC-related preferences of three key stakeholders-patients, primary care physicians (PCPs) and policy makers (PMs)-is crucial for achieving optimal implementation. The aim of this study was to select relevant attributes and levels for a discrete choice experiment (DCE) of stakeholders' choice-VC or traditional in-clinic consultation (I-CC) in primary care. Ten semi-structured focus group interviews and 24 semi-structured individual interviews were conducted. Data analysis was performed inductively, using a thematic content analysis method. An attribute-ranking exercise was then conducted based on the results gleaned from the interviews. The most important attributes when choosing either VC or I-CC, for both patients and PMs, were: (1) time to next available appointment; (2) time in line before consultation; (3) relationship to PCP; and (4) quality of consultation. For PCPs, the most important attributes were: (1) time in line before consultation; (2) patient's self-management ability; (3) consultation purpose; (4) quality of consultation. This qualitative study identified attributes and levels for a DCE quantitative stage among three key stakeholder groups. It adds to the literature of examples of developing DCE attributes, and to literature about the stakeholder benefits in the area of telemedicine in healthcare.

Key attributes of agricultural innovations in semi-arid smallholder farming systems in south-west Zimbabwe

NASA Astrophysics Data System (ADS)

Mutsvangwa-Sammie, Eness P.; Manzungu, Emmanuel; Siziba, Shephard

2018-06-01

In Sub-Sahara Africa, which includes Zimbabwe, about 80% of the population depends on agriculture for subsistence, employment and income. Agricultural production and productivity are, however, low. This has been attributed to a lack of appropriate innovations despite the huge investments that have been made to promote 'innovations' as a means to safeguarding agriculture-based livelihoods, which raises the question of how innovations are conceptualized, designed and implemented. This paper explores the key attributes of agricultural innovations by assessing how innovations are conceptualized, designed and implemented in semi-arid smallholder farming systems in south-west Zimbabwe. The study gathered information from 13 key informants and a household survey of 239 farmer households from Gwanda and Insiza districts. Results showed a multiplicity of understandings of agricultural innovations among different stakeholders. However, novelty/newness, utility and adaptability were identified as the major attributes. In general, farmers characterized agricultural innovations as 'something new and mostly introduced by NGOs' but did not associate them with the key attributes of utility and adaptability. More crop-related innovations were identified despite the area being suitable for livestock production. The paper concludes that, rather than view the multiple and sometimes competing understandings of agricultural innovations as undesirable, this should be used to promote context specific innovations which stand a better chance of enhancing agriculture-based livelihoods.

A discrete choice experiment to determine UK patient preference for attributes of disease modifying treatments in Multiple Sclerosis.

PubMed

Bottomley, Catherine; Lloyd, Andrew; Bennett, Gary; Adlard, Nicholas

2017-08-01

The recent licensing of Disease Modifying Treatments (DMTs) for Multiple Sclerosis (MS) has increased available treatment options. The aim of this study was to explore MS patients' preference for the different attributes of DMTs in the UK. Attributes (treatment characteristics) for inclusion in the discrete choice experiment (DCE) were determined through published literature and interviews with 12 people with MS. Seven attributes were selected. Participants were presented with three hypothetical treatment options sampled from included attributes and asked for their most/least preferred options. The influence of patient characteristics and demographics on patient preference was also investigated. The DCE was completed by 350 people with MS (81% female, mean age = 39). Results showed that method of taking medication was the strongest determinant of preference (27%; relative importance out of 100%), followed by relapse free rate (21%) and symptom progression (14%). Risk of fatigue (8%) and type of monitoring (6%) were the weakest determinants of preference. Once-daily oral treatment was preferred over all other methods of administration. Participant characteristics did not influence data on strength of preference. This study assumed adequate participant understanding of the discrete choice experiment task, and recruitment targeted those with access to the internet. These results, derived from people with MS in the UK, should be used to inform individual discussions with patients about DMT choices.

New genetic tools to improve citrus fruit quality and drive consumer demand

USDA-ARS?s Scientific Manuscript database

Chemical and genomic dissection of important components underlying fruit quality has led toward the development of new tools to make the creation and selection of citrus cultivars improved in quality attributes more targeted and efficient. The use of SNP platforms and other technologies have resulte...

INTER-ANNUAL AND SEASONAL VARIABILITY OF METEOROLOGICALLY-INFLUENCED EMISSIONS

EPA Science Inventory

The EPA is a participant in the U.S. Global Change Research Program. The air quality portion of the GCRP addresses the effect on air quality attributable to climate change in the intermediate future (e.g., 2050). The first phase of the program examines the change in air quality...

Monitoring and predicting shrink potential and future processing quality of potato tubers

USDA-ARS?s Scientific Manuscript database

Long-term storage of potato tubers increases risks, which are often attributed to shrink and quality loss. To minimize shrink and ensure high quality tubers, producers must closely monitor the condition of the crop during storage and make necessary adjustments to management plans. Evaluation procedu...

Medicaid plan, health centers reveal secrets to boosting HEDIS scores, quality of care.

PubMed

1999-07-01

How to do well on HEDIS measurement and boost quality of care for your Medicaid members. Neighborhood Health Plan in Boston, MA, attributes its top performance on Medicaid HEDIS measures to providers' care models, a commitment to quality, and the quest for performance data.

Recombination dynamics of excitons with low non-radiative component in semi-polar (10-11)-oriented GaN/AlGaN multiple quantum wells

NASA Astrophysics Data System (ADS)

Rosales, D.; Gil, B.; Bretagnon, T.; Guizal, B.; Izyumskaya, N.; Monavarian, M.; Zhang, F.; Okur, S.; Avrutin, V.; Özgür, Ü.; Morkoç, H.

2014-09-01

Optical properties of GaN/Al0.2Ga0.8N multiple quantum wells grown with semi-polar (10-11) orientation on patterned 7°-off Si (001) substrates have been investigated. Studies performed at 8 K reveal the in-plane anisotropic behavior of the QW photoluminescence (PL) intensity for this semi-polar orientation. The time resolved PL measurements were carried out in the temperature range from 8 to 295 K to deduce the effective recombination decay times, with respective radiative and non-radiative contributions. The non-radiative component remains relatively weak with increasing temperature, indicative of high crystalline quality. The radiative decay time is a consequence of contribution from both localized and free excitons. We report an effective density of interfacial defects of 2.3 × 1012 cm-2 and a radiative recombination time of τloc = 355 ps for the localized excitons. This latter value is significantly larger than those reported for the non-polar structures, which we attribute to the presence of a weak residual electric field in the semi-polar QW layers.

Single-process versus multiple-strategy models of decision making: evidence from an information intrusion paradigm.

PubMed

Söllner, Anke; Bröder, Arndt; Glöckner, Andreas; Betsch, Tilmann

2014-02-01

When decision makers are confronted with different problems and situations, do they use a uniform mechanism as assumed by single-process models (SPMs) or do they choose adaptively from a set of available decision strategies as multiple-strategy models (MSMs) imply? Both frameworks of decision making have gathered a lot of support, but only rarely have they been contrasted with each other. Employing an information intrusion paradigm for multi-attribute decisions from givens, SPM and MSM predictions on information search, decision outcomes, attention, and confidence judgments were derived and tested against each other in two experiments. The results consistently support the SPM view: Participants seemingly using a "take-the-best" (TTB) strategy do not ignore TTB-irrelevant information as MSMs would predict, but adapt the amount of information searched, choose alternative choice options, and show varying confidence judgments contingent on the quality of the "irrelevant" information. The uniformity of these findings underlines the adequacy of the novel information intrusion paradigm and comprehensively promotes the notion of a uniform decision making mechanism as assumed by single-process models. Copyright © 2013 The Authors. Published by Elsevier B.V. All rights reserved.

Despite Increased Insurance Coverage, Nonwhite Sexual Minorities Still Experience Disparities In Access To Care.

PubMed

Hsieh, Ning; Ruther, Matt

2017-10-01

Previous studies suggest that members of sexual minority groups have poorer access to health services than heterosexuals. However, few studies have examined how sexual orientation interacts with gender and race to affect health care experience. Moreover, little is known about the role in health care disparities played by economic strains such as unemployment and poverty, which may result from prejudice and discrimination based on sexual orientation. Using data for 2013-15 from the National Health Interview Survey, we found that most members of sexual minority groups no longer have higher uninsurance rates than heterosexuals, but many continue to experience poorer access to high-quality care. Gay nonwhite men, bisexual white women, and bisexual and lesbian nonwhite women are disadvantaged in multiple aspects of access, compared to straight white men. Only some of these disparities are attributable to economic factors, which implies that noneconomic barriers to care are substantial. Our results suggest that the intersection of multiple social identities can reveal important gaps in health care experience. Making culturally sensitive services available may be key to closing the gaps. Project HOPE—The People-to-People Health Foundation, Inc.

Relating Communication Competence to Teaching Effectiveness: Implication for Teacher Education

ERIC Educational Resources Information Center

Okoli, Alexander C.

2017-01-01

There is wide practice of attributing students' achievement to teacher effectiveness. Some school authorities take this further by querying teachers over poor performances of their students. Although the teacher is just one factor among many that determine students' performances, the teachers' attributes and qualities are very important in the…

Patient Preferences for Pain Management in Advanced Cancer: Results from a Discrete Choice Experiment.

PubMed

Meads, David M; O'Dwyer, John L; Hulme, Claire T; Chintakayala, Phani; Vinall-Collier, Karen; Bennett, Michael I

2017-10-01

Pain from advanced cancer remains prevalent, severe and often under-treated. The aim of this study was to conduct a discrete choice experiment with patients to understand their preferences for pain management services and inform service development. Focus groups were used to develop the attributes and levels of the discrete choice experiment. The attributes were: waiting time, type of healthcare professional, out-of-pocket costs, side-effect control, quality of communication, quality of information and pain control. Patients completed the discrete choice experiment along with clinical and health-related quality of life questions. Conditional and mixed logit models were used to analyse the data. Patients with cancer pain (n = 221) and within palliative care services completed the survey (45% were female, mean age 64.6 years; age range 21-92 years). The most important aspects of pain management were: good pain control, zero out-of-pocket costs and good side-effect control. Poor or moderate pain control and £30 costs drew the highest negative preferences. Respondents preferred control of side effects and provision of better information and communication, over access to certain healthcare professionals. Those with lower health-related quality of life were less willing to wait for treatment and willing to incur higher costs. The presence of a carer influenced preferences. Outcome attributes were more important than process attributes but the latter were still valued. Thus, supporting self-management, for example by providing better information on pain may be a worthwhile endeavour. However, service provision may need to account for individual characteristics given the heterogeneity in preferences.

Determining Sala mango qualities with the use of RGB images captured by a mobile phone camera

NASA Astrophysics Data System (ADS)

Yahaya, Ommi Kalsom Mardziah; Jafri, Mohd Zubir Mat; Aziz, Azlan Abdul; Omar, Ahmad Fairuz

2015-04-01

Sala mango (Mangifera indicia) is one of the Malaysia's most popular tropical fruits that are widely marketed within the country. The degrees of ripeness of mangoes have conventionally been evaluated manually on the basis of color parameters, but a simple non-destructive technique using the Samsung Galaxy Note 1 mobile phone camera is introduced to replace the destructive technique. In this research, color parameters in terms of RGB values acquired using the ENVI software system were linked to detect Sala mango quality parameters. The features of mango were extracted from the acquired images and then used to classify of fruit skin color, which relates to the stages of ripening. A multivariate analysis method, multiple linear regression, was employed with the purpose of using RGB color parameters to estimate the pH, soluble solids content (SSC), and firmness. The relationship between these qualities parameters of Sala mango and its mean pixel values in the RGB system is analyzed. Findings show that pH yields the highest accuracy with a correlation coefficient R = 0.913 and root mean square of error RMSE = 0.166 pH. Meanwhile, firmness has R = 0.875 and RMSE = 1.392 kgf, whereas soluble solid content has the lowest accuracy with R = 0.814 and RMSE = 1.218°Brix with the correlation between color parameters. Therefore, this non-invasive method can be used to determine the quality attributes of mangoes.

Qualitative analysis of MMI raters' scorings of medical school candidates: A matter of taste?

PubMed

Christensen, Mette K; Lykkegaard, Eva; Lund, Ole; O'Neill, Lotte D

2018-05-01

Recent years have seen leading medical educationalists repeatedly call for a paradigm shift in the way we view, value and use subjectivity in assessment. The argument is that subjective expert raters generally bring desired quality, not just noise, to performance evaluations. While several reviews document the psychometric qualities of the Multiple Mini-Interview (MMI), we currently lack qualitative studies examining what we can learn from MMI raters' subjectivity. The present qualitative study therefore investigates rater subjectivity or taste in MMI selection interview. Taste (Bourdieu 1984) is a practical sense, which makes it possible at a pre-reflective level to apply 'invisible' or 'tacit' categories of perception for distinguishing between good and bad. The study draws on data from explorative in-depth interviews with 12 purposefully selected MMI raters. We find that MMI raters spontaneously applied subjective criteria-their taste-enabling them to assess the candidates' interpersonal attributes and to predict the candidates' potential. In addition, MMI raters seemed to share a taste for certain qualities in the candidates (e.g. reflectivity, resilience, empathy, contact, alikeness, 'the good colleague'); hence, taste may be the result of an ongoing enculturation in medical education and healthcare systems. This study suggests that taste is an inevitable condition in the assessment of students' performance. The MMI set-up should therefore make room for MMI raters' taste and their connoisseurship, i.e. their ability to taste, to improve the quality of their assessment of medical school candidates.

Gas chromatography/mass spectrometry based component profiling and quality prediction for Japanese sake.

PubMed

Mimura, Natsuki; Isogai, Atsuko; Iwashita, Kazuhiro; Bamba, Takeshi; Fukusaki, Eiichiro

2014-10-01

Sake is a Japanese traditional alcoholic beverage, which is produced by simultaneous saccharification and alcohol fermentation of polished and steamed rice by Aspergillus oryzae and Saccharomyces cerevisiae. About 300 compounds have been identified in sake, and the contribution of individual components to the sake flavor has been examined at the same time. However, only a few compounds could explain the characteristics alone and most of the attributes still remain unclear. The purpose of this study was to examine the relationship between the component profile and the attributes of sake. Gas chromatography coupled with mass spectrometry (GC/MS)-based non-targeted analysis was employed to obtain the low molecular weight component profile of Japanese sake including both nonvolatile and volatile compounds. Sake attributes and overall quality were assessed by analytical descriptive sensory test and the prediction model of the sensory score from the component profile was constructed by means of orthogonal projections to latent structures (OPLS) regression analysis. Our results showed that 12 sake attributes [ginjo-ka (aroma of premium ginjo sake), grassy/aldehydic odor, sweet aroma/caramel/burnt odor, sulfury odor, sour taste, umami, bitter taste, body, amakara (dryness), aftertaste, pungent/smoothness and appearance] and overall quality were accurately explained by component profiles. In addition, we were able to select statistically significant components according to variable importance on projection (VIP). Our methodology clarified the correlation between sake attribute and 200 low molecular components and presented the importance of each component thus, providing new insights to the flavor study of sake. Copyright © 2014 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Interpretations of referral appropriateness by senior health managers in five PCT areas in England: a qualitative investigation.

PubMed

Blundell, N; Clarke, Aileen; Mays, N

2010-06-01

To explore interpretations of "appropriate" and "inappropriate" elective referral from primary to secondary surgical care among senior clinical and non-clinical managers in five purposively sampled primary care trusts (PCTs) and their main associated acute hospitals in the English National Health Service (NHS). Semi-structured face-to-face interviews were undertaken with senior managerial staff from clinical and non-clinical backgrounds. Interviews were tape-recorded, transcribed and analysed according to the Framework approach developed at the National Centre for Social Research using N6 (NUD*IST6) qualitative data analysis software. Twenty-two people of 23 approached were interviewed (between three and five respondents per PCT and associated acute hospital). Three attributes relating to appropriateness of referral were identified: necessity: whether a patient with given characteristics was believed suitable for referral; destination or level: where or to whom a patient should be referred; and quality (or process): how a referral was carried out, including (eg, investigations undertaken before referral, information contained in the referral and extent of patient involvement in the referral decision. Attributes were hierarchical. "Necessity" was viewed as the most fundamental attribute, followed by "destination" and, finally, "quality". In general, but not always, all three attributes were perceived as necessary for a referral to be defined as appropriate. For senior clinical and non-clinical managers at the local level in the English NHS, three hierarchical attributes (necessity, appropriateness of destination and quality of referral process) contributed to the overall concept of appropriateness of referral from primary to secondary surgical care.

Effects of retrieval practice on consumer memory for brand attributes.

PubMed

Parker, Andrew; Dagnall, Neil

2007-08-01

The effect of retrieval practice on memory for brand attributes was examined. Participants were presented with advertisements for fictional products so each contained a number of brand attributes relating to the nature of the product and its qualities. Following this, participants practiced recalling a subset of those attributes either 3 or 6 times. The act of retrieving some brand information inhibited the recall of other brand information that was not practiced, but only when repeated retrieval practice took place 6 times. This is the first demonstration of inhibitory effects in consumers' memory using the retrieval practice paradigm.

Assessment of sound quality perception in cochlear implant users during music listening.

PubMed

Roy, Alexis T; Jiradejvong, Patpong; Carver, Courtney; Limb, Charles J

2012-04-01

Although cochlear implant (CI) users frequently report deterioration of sound quality when listening to music, few methods exist to quantify these subjective claims. 1) To design a novel research method for quantifying sound quality perception in CI users during music listening; 2) To validate this method by assessing one attribute of music perception, bass frequency perception, which is hypothesized to be relevant to overall musical sound quality perception. Limitations in bass frequency perception contribute to CI-mediated sound quality deteriorations. The proposed method will quantify this deterioration by measuring CI users' impaired ability to make sound quality discriminations among musical stimuli with variable amounts of bass frequency removal. A method commonly used in the audio industry (multiple stimulus with hidden reference and anchor [MUSHRA]) was adapted for CI users, referred to as CI-MUSHRA. CI users and normal hearing controls were presented with 7 sound quality versions of a musical segment: 5 high pass filter cutoff versions (200-, 400-, 600-, 800-, 1000-Hz) with decreasing amounts of bass information, an unaltered version ("hidden reference"), and a highly altered version (1,000-1,200 Hz band pass filter; "anchor"). Participants provided sound quality ratings between 0 (very poor) and 100 (excellent) for each version; ratings reflected differences in perceived sound quality among stimuli. CI users had greater difficulty making overall sound quality discriminations as a function of bass frequency loss than normal hearing controls, as demonstrated by a significantly weaker correlation between bass frequency content and sound quality ratings. In particular, CI users could not perceive sound quality difference among stimuli missing up to 400 Hz of bass frequency information. Bass frequency impairments contribute to sound quality deteriorations during music listening for CI users. CI-MUSHRA provided a systematic and quantitative assessment of this reduced sound quality. Although the effects of bass frequency removal were studied here, we advocate CI-MUSHRA as a user-friendly and versatile research tool to measure the effects of a wide range of acoustic manipulations on sound quality perception in CI users.

Multiple Attribute Group Decision-Making Methods Based on Trapezoidal Fuzzy Two-Dimensional Linguistic Partitioned Bonferroni Mean Aggregation Operators.

PubMed

Yin, Kedong; Yang, Benshuo; Li, Xuemei

2018-01-24

In this paper, we investigate multiple attribute group decision making (MAGDM) problems where decision makers represent their evaluation of alternatives by trapezoidal fuzzy two-dimensional uncertain linguistic variable. To begin with, we introduce the definition, properties, expectation, operational laws of trapezoidal fuzzy two-dimensional linguistic information. Then, to improve the accuracy of decision making in some case where there are a sort of interrelationship among the attributes, we analyze partition Bonferroni mean (PBM) operator in trapezoidal fuzzy two-dimensional variable environment and develop two operators: trapezoidal fuzzy two-dimensional linguistic partitioned Bonferroni mean (TF2DLPBM) aggregation operator and trapezoidal fuzzy two-dimensional linguistic weighted partitioned Bonferroni mean (TF2DLWPBM) aggregation operator. Furthermore, we develop a novel method to solve MAGDM problems based on TF2DLWPBM aggregation operator. Finally, a practical example is presented to illustrate the effectiveness of this method and analyses the impact of different parameters on the results of decision-making.

Multiple Attribute Group Decision-Making Methods Based on Trapezoidal Fuzzy Two-Dimensional Linguistic Partitioned Bonferroni Mean Aggregation Operators

PubMed Central

Yin, Kedong; Yang, Benshuo

2018-01-01

In this paper, we investigate multiple attribute group decision making (MAGDM) problems where decision makers represent their evaluation of alternatives by trapezoidal fuzzy two-dimensional uncertain linguistic variable. To begin with, we introduce the definition, properties, expectation, operational laws of trapezoidal fuzzy two-dimensional linguistic information. Then, to improve the accuracy of decision making in some case where there are a sort of interrelationship among the attributes, we analyze partition Bonferroni mean (PBM) operator in trapezoidal fuzzy two-dimensional variable environment and develop two operators: trapezoidal fuzzy two-dimensional linguistic partitioned Bonferroni mean (TF2DLPBM) aggregation operator and trapezoidal fuzzy two-dimensional linguistic weighted partitioned Bonferroni mean (TF2DLWPBM) aggregation operator. Furthermore, we develop a novel method to solve MAGDM problems based on TF2DLWPBM aggregation operator. Finally, a practical example is presented to illustrate the effectiveness of this method and analyses the impact of different parameters on the results of decision-making. PMID:29364849

Influence of diets with silage from forage plants adapted to the semi-arid conditions on lamb quality and sensory attributes.

PubMed

Campos, F S; Carvalho, G G P; Santos, E M; Araújo, G G L; Gois, G C; Rebouças, R A; Leão, A G; Santos, S A; Oliveira, J S; Leite, L C; Araújo, M L G M L; Cirne, L G A; Silva, R R; Carvalho, B M A

2017-02-01

Quality and sensory attributes of meat from 32 mixed-breed Santa Inês lambs fed diets composed of four silages with old man saltbush (Atriplex nummularia Lind), buffelgrass (Cenchrus ciliaris), Gliricidia (Gliricidia sepium), and Pornunça (Manihot sp.) were evaluated. Meat from lambs fed diet containing old man saltbush silage (P<0.05) showed greater values for cooking loss. Of the sensory attributes evaluated in the Longissimus lumborum muscle of the lambs, color and juiciness did not differ (P>0.05). However, the silages led to differences (P<0.05) in aroma, tenderness, and flavor values. The meat from animals fed the pornunça and Gliricidia silages was tenderer. Flavor scores were higher in meat from lambs that consumed old man saltbush silage and lower in the meat from those fed buffelgrass silage. Diets formulated with buffelgrass silage for sheep reduce meat production. Based on the results for carcass weight and meat quality, old man saltbush and pornunça are better silages for finishing sheep. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optimization of composite flour biscuits by mixture response surface methodology.

PubMed

Okpala, Laura C; Okoli, Eric C

2013-08-01

Biscuits were produced from blends of pigeon pea, sorghum and cocoyam flours. The study was carried out using mixture response surface methodology as the optimization technique. Using the simplex centroid design, 10 formulations were obtained. Protein and sensory quality of the biscuits were analyzed. The sensory attributes studied were appearance, taste, texture, crispness and general acceptability, while the protein quality indices were biological value and net protein utilization. The results showed that while the addition of pigeon pea improved the protein quality, its addition resulted in reduced sensory ratings for all the sensory attributes with the exception of appearance. Some of the biscuits had sensory ratings, which were not significantly different (p > 0.05) from biscuits made with wheat. Rat feeding experiments indicated that the biological value and net protein utilization values obtained for most of the biscuits were above minimum recommended values. Optimization suggested biscuits containing 75.30% sorghum, 0% pigeon pea and 24.70% cocoyam flours as the best proportion of these components. This sample received good scores for the sensory attributes.

Comparison of cook loss, shear force, and sensory descriptive profiles of boneless skinless white meat cooked from a frozen or thawed state.

PubMed

Zhuang, Hong; Savage, Elizabeth M

2013-11-01

Four replications were conducted to compare quality measurements, cook loss, shear force, and sensory quality attributes of cooked boneless skinless white meat, broiler breast fillets (pectoralis major) prepared directly from a frozen state or prepared from a thawed state. In each replication, fresh broiler fillets (removed from carcasses 6-8 h postmortem) were procured from a local commercial processing plant and stored in a -20°C freezer until use. On the sensory evaluation date, fillets were cooked to an endpoint temperature of 78°C either directly from the frozen state (thawing during cooking) or after the frozen samples were thawed in a refrigerator (2°C) overnight (thawing before cooking). Cook loss and Warner-Bratzler (WB) shear force were used as indicators for instrumental quality measurements. Sensory quality measurements were conducted by trained descriptive panelists using 0 to 15 universal intensity scales for 8 texture and 10 flavor attributes. Results show that there were no differences (P > 0.05) in measurements for sensory descriptive flavor attributes of cooked fillets between the 2 sample thawing methods, indicating that the sensory flavor profiles of both methods were similar to each other. However, WB shear force (36.98 N), cook loss (21.2%), sensory texture attributes of cohesiveness (intensity score was 5.59), hardness (5.14), rate of breakdown (5.50), and chewiness (5.21) of the breast fillets cooked directly from the frozen state were significantly higher (P < 0.05) than those of the breast meat cooked after being thawed (30.56 N, 19.0%, 5.19, 4.78, 5.29, and 5.02, respectively). These results indicate that cookery directly from frozen boneless skinless white meat can result in different measurement values of cook loss, shear force, and sensory descriptive texture attributes compared with cookery after frozen fillets are thawed.

Principal component analysis of physicochemical and sensory characteristics of beef rounds extended with gum arabic from Acacia senegal var. kerensis.

PubMed

Mwove, Johnson K; Gogo, Lilian A; Chikamai, Ben N; Omwamba, Mary; Mahungu, Symon M

2018-03-01

Principal component analysis (PCA) was carried out to study the relationship between 24 meat quality measurements taken from beef round samples that were injected with curing brines containing gum arabic (1%, 1.5%, 2%, 2.5%, and 3%) and soy protein concentrate (SPC) (3.5%) at two injection levels (30% and 35%). The measurements used to describe beef round quality were expressible moisture, moisture content, cook yield, possible injection, achieved gum arabic level in beef round, and protein content, as well as descriptive sensory attributes for flavor, texture, basic tastes, feeling factors, color, and overall acceptability. Several significant correlations were found between beef round quality parameters. The highest significant negative and positive correlations were recorded between color intensity and gray color and between color intensity and brown color, respectively. The first seven principal components (PCs) were extracted explaining over 95% of the total variance. The first PC was characterized by texture attributes (hardness and denseness), feeling factors (chemical taste and chemical burn), and two physicochemical properties (expressible moisture and achieved gum arabic level). Taste attribute (saltiness), physicochemical attributes (cook yield and possible injection), and overall acceptability were useful in defining the second PC, while the third PC was characterized by metallic taste, gray color, brown color, and physicochemical attributes (moisture and protein content). The correlation loading plot showed that the distribution of the samples on the axes of the first two PCs allowed for differentiation of samples injected to 30% injection level which were placed on the upper side of the biplot from those injected to 35% which were placed on the lower side. Similarly, beef samples extended with gum arabic and those containing SPC were also visible when scores for the first and third PCs were plotted. Thus, PCA was efficient in analyzing the quality characteristics of beef rounds extended with gum arabic.

Sensitivity of ALOS/PALSAR imagery to forest degradation by fire in northern Amazon

NASA Astrophysics Data System (ADS)

Martins, Flora da Silva Ramos Vieira; dos Santos, João Roberto; Galvão, Lênio Soares; Xaud, Haron Abrahim Magalhães

2016-07-01

We evaluated the sensitivity of the full polarimetric Phased Array type L-band Synthetic Aperture Radar (PALSAR), onboard the Advanced Land Observing Satellite (ALOS), to forest degradation caused by fires in northern Amazon, Brazil. We searched for changes in PALSAR signal and tri-dimensional polarimetric responses for different classes of fire disturbance defined by fire frequency and severity. Since the aboveground biomass (AGB) is affected by fire, multiple regression models to estimate AGB were obtained for the whole set of coherent and incoherent attributes (general model) and for each set separately (specific models). The results showed that the polarimetric L-band PALSAR attributes were sensitive to variations in canopy structure and AGB caused by forest fire. However, except for the unburned and thrice burned classes, no single PALSAR attribute was able to discriminate between the intermediate classes of forest degradation by fire. Both the coherent and incoherent polarimetric attributes were important to explain AGB variations in tropical forests affected by fire. The HV backscattering coefficient, anisotropy, double-bounce component, orientation angle, volume index and HH-VV phase difference were PALSAR attributes selected from multiple regression analysis to estimate AGB. The general regression model, combining phase and power radar metrics, presented better results than specific models using coherent or incoherent attributes. The polarimetric responses indicated the dominance of VV-oriented backscattering in primary forest and lightly burned forests. The HH-oriented backscattering predominated in heavily and frequently burned forests. The results suggested a greater contribution of horizontally arranged constituents such as fallen trunks or branches in areas severely affected by fire.

Water quality in New Zealand's planted forests: A review

Treesearch

Brenda R. Baillie; Daniel G. Neary

2015-01-01

This paper reviewed the key physical, chemical and biological water quality attributes of surface waters in New Zealand’s planted forests. The purpose was to: a) assess the changes in water quality throughout the planted forestry cycle from afforestation through to harvesting; b) compare water quality from planted forests with other land uses in New Zealand; and c)...

Using Simpson's diversity index to examine multidimensional models of diversity in health professions education.

PubMed

McLaughlin, Jacqueline E; McLaughlin, Gerald W; McLaughlin, Josetta S; White, Carla Y

2016-01-03

This study explored new models of diversity for health professions education that incorporate multiple attributes and examined differences in diversity based on urbanicity, geographic region, and institutional structure. Simpson's Diversity Index was used to develop race, gender, and interprofessional diversity indices for health professions schools in the United States (N = 318). Sullivan's extension was used to develop a composite diversity index that incorporated multiple individual attributes for each school. Pearson's r was used to investigate correlations between continuous variables. ANOVA and independent t-tests were used to compare groups based on urbanicity, geographic region, and Basic Carnegie Classification. Mean (SD) for race, gender, and interprofessional diversity indices were 0.36(0.17), 0.45(0.07), and 0.22(0.27) respectively. All correlations between the three indices were weak. The composite diversity index for this sample was 0.34(0.13). Significant differences in diversity were found between institutions based on urbanicity, Basic Carnegie Classification, and geographic region. Multidimensional models provide support for expanding measures of diversity to include multiple characteristics and attributes. The approach demonstrated in this study enables institutions to complement and extend traditional measures of diversity as a means of providing evidence for decision-making and progress towards institutional initiatives.

Using Simpson’s diversity index to examine multidimensional models of diversity in health professions education

PubMed Central

McLaughlin, Gerald W.; McLaughlin, Josetta S.; White, Carla Y.

2016-01-01

Objectives This study explored new models of diversity for health professions education that incorporate multiple attributes and examined differences in diversity based on urbanicity, geographic region, and institutional structure. Methods Simpson’s Diversity Index was used to develop race, gender, and interprofessional diversity indices for health professions schools in the United States (N = 318). Sullivan’s extension was used to develop a composite diversity index that incorporated multiple individual attributes for each school. Pearson’s r was used to investigate correlations between continuous variables. ANOVA and independent t-tests were used to compare groups based on urbanicity, geographic region, and Basic Carnegie Classification. Results Mean (SD) for race, gender, and interprofessional  diversity indices were 0.36(0.17), 0.45(0.07), and 0.22(0.27) respectively. All correlations between the three indices were weak. The composite diversity index for this sample was 0.34(0.13). Significant differences in diversity were found between institutions based on urbanicity, Basic Carnegie Classification, and geographic region. Conclusions Multidimensional models provide support for expanding measures of diversity to include multiple characteristics and attributes. The approach demonstrated in this study enables institutions to complement and extend traditional measures of diversity as a means of providing evidence for decision-making and progress towards institutional initiatives. PMID:26724917

If You Don't Know, Ask! Using Expert Knowledge to Determine What Content Is Needed in an Undergraduate Food Quality Management and Control Course

ERIC Educational Resources Information Center

Joyner, Helen S.; Stevenson, Clinton D.

2017-01-01

Quality management and quality control of food products are critical to producing food that is safe to consume and has consistent quality and sensory attributes. The extent to which undergraduate students are equipped with competencies in quality management/control, in theory, has a direct connection with their career potential to ensure food…

Animal breeding strategies can improve meat quality attributes within entire populations.

PubMed

Berry, D P; Conroy, S; Pabiou, T; Cromie, A R

2017-10-01

The contribution of animal breeding to changes in animal performance is well documented across a range of species. Once genetic variation in a trait exists, then breeding to improve the characteristics of that trait is possible, if so desired. Considerable genetic variation exists in a range of meat quality attributes across a range of species. The genetic variation that exists for meat quality is as large as observed for most performance traits; thus, within a well-structured breeding program, rapid genetic gain for meat quality could be possible. The rate of genetic gain can be augmented through the integration of DNA-based technologies into the breeding program; such DNA-based technologies should, however, be based on thousands of DNA markers dispersed across the entire genome. Genetic and genomic technologies can also have beneficial impact outside the farm gate as a tool to segregate carcasses or meat cuts based on expected meat quality features. Copyright © 2017 Elsevier Ltd. All rights reserved.

Rust and Thinning Management Effect on Cup Quality and Plant Performance for Two Cultivars of Coffea arabica L.

PubMed

Echeverria-Beirute, Fabian; Murray, Seth C; Klein, Patricia; Kerth, Chris; Miller, Rhonda; Bertrand, Benoit

2018-05-30

Beverage quality is a complex attribute of coffee ( Coffea arabica L.). Genotype (G), environment (E), management (M), postharvest processing, and roasting are all involved. However, little is known about how G × M interactions influence beverage quality. We investigated how yield and coffee leaf rust (CLR) disease (caused by Hemileia vastatrix Berk. et Br.) management affect cup quality and plant performance, in two coffee cultivars. Sensory and chemical analyses revealed that 10 of 70 attributes and 18 of 154 chemical volatile compounds were significantly affected by G and M. Remarkably, acetaminophen was found for the first time in roasted coffee and in higher concentrations under more stressful conditions. A principal component analysis described 87% of the variation in quality and plant overall performance. This study is a first step in understanding the complexity of the physiological, metabolic, and molecular changes in coffee production, which will be useful for the improvement of coffee cultivars.

How the variance of some extraction variables may affect the quality of espresso coffees served in coffee shops.

PubMed

Severini, Carla; Derossi, Antonio; Fiore, Anna G; De Pilli, Teresa; Alessandrino, Ofelia; Del Mastro, Arcangela

2016-07-01

To improve the quality of espresso coffee, the variables under the control of the barista, such as grinding grade, coffee quantity and pressure applied to the coffee cake, as well as their variance, are of great importance. A nonlinear mixed effect modeling was used to obtain information on the changes in chemical attributes of espresso coffee (EC) as a function of the variability of extraction conditions. During extraction, the changes in volume were well described by a logistic model, whereas the chemical attributes were better fit by a first-order kinetic. The major source of information was contained in the grinding grade, which accounted for 87-96% of the variance of the experimental data. The variability of the grinding produced changes in caffeine content in the range of 80.03 mg and 130.36 mg when using a constant grinding grade of 6.5. The variability in volume and chemical attributes of EC is large. Grinding had the most important effect as the variability in particle size distribution observed for each grinding level had a profound effect on the quality of EC. Standardization of grinding would be of crucial importance for obtaining all espresso coffees with a high quality. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Effect of Aspergillus niger xylanase on dough characteristics and bread quality attributes.

PubMed

Ahmad, Zulfiqar; Butt, Masood Sadiq; Ahmed, Anwaar; Riaz, Muhammad; Sabir, Syed Mubashar; Farooq, Umar; Rehman, Fazal Ur

2014-10-01

The present study was conducted to investigate the impact of various treatments of xylanase produced by Aspergillus niger applied in bread making processes like during tempering of wheat kernels and dough mixing on the dough quality characteristics i.e. dryness, stiffness, elasticity, extensibility, coherency and bread quality parameters i.e. volume, specific volume, density, moisture retention and sensory attributes. Different doses (200, 400, 600, 800 and 1,000 IU) of purified enzyme were applied to 1 kg of wheat grains during tempering and 1 kg of flour (straight grade flour) during mixing of dough in parallel. The samples of wheat kernels were agitated at different intervals for uniformity in tempering. After milling and dough making of both types of flour (having enzyme treatment during tempering and flour mixing) showed improved dough characteristics but the improvement was more prominent in the samples receiving enzyme treatment during tempering. Moreover, xylanase decreased dryness and stiffness of the dough whereas, resulted in increased elasticity, extensibility and coherency and increase in volume & decrease in bread density. Xylanase treatments also resulted in higher moisture retention and improvement of sensory attributes of bread. From the results, it is concluded that dough characteristics and bread quality improved significantly in response to enzyme treatments during tempering as compared to application during mixing.

Physicochemical and microbiological qualities of steamed and irradiated ground black pepper (Piper nigrum L.).

PubMed

Waje, Catherine K; Kim, Hyun-Ku; Kim, Kyong-Su; Todoriki, Setsuko; Kwon, Joong-Ho

2008-06-25

The effects of steam and irradiation treatments on the physicochemical properties (moisture content, pH, extractable yield, reducing sugar, soluble pigment, antioxidant activity, piperine, Hunter's color, and sensory attributes) and microbiological quality (total aerobic bacteria, coliforms, and yeasts and molds) of ground black pepper stored at refrigerated and room temperatures for 6 months were compared and evaluated. Irradiation resulted in a higher microbial reduction in pepper, with minimal effects on the proximate composition, functional components, color, and sensory attributes of the spice. Steamed peppers appeared darker, and a considerable decrease in the piperine content was observed after treatment and storage. This study illustrates that irradiation is a better decontamination method than steam treatment in eliminating microorganisms without apparently affecting the quality of the powdered spice. Storage at 4 degrees C enhanced the microbial quality and minimized the loss of piperine content in ground black peppers.

Unassigned MS/MS Spectra: Who Am I?

PubMed

Pathan, Mohashin; Samuel, Monisha; Keerthikumar, Shivakumar; Mathivanan, Suresh

2017-01-01

Recent advances in high resolution tandem mass spectrometry (MS) has resulted in the accumulation of high quality data. Paralleled with these advances in instrumentation, bioinformatics software have been developed to analyze such quality datasets. In spite of these advances, data analysis in mass spectrometry still remains critical for protein identification. In addition, the complexity of the generated MS/MS spectra, unpredictable nature of peptide fragmentation, sequence annotation errors, and posttranslational modifications has impeded the protein identification process. In a typical MS data analysis, about 60 % of the MS/MS spectra remains unassigned. While some of these could attribute to the low quality of the MS/MS spectra, a proportion can be classified as high quality. Further analysis may reveal how much of the unassigned MS spectra attribute to search space, sequence annotation errors, mutations, and/or posttranslational modifications. In this chapter, the tools used to identify proteins and ways to assign unassigned tandem MS spectra are discussed.