On-Chip Power-Combining for High-Power Schottky Diode Based Frequency Multipliers

NASA Technical Reports Server (NTRS)

Siles Perez, Jose Vicente (Inventor); Chattopadhyay, Goutam (Inventor); Lee, Choonsup (Inventor); Schlecht, Erich T. (Inventor); Jung-Kubiak, Cecile D. (Inventor); Mehdi, Imran (Inventor)

2015-01-01

A novel MMIC on-chip power-combined frequency multiplier device and a method of fabricating the same, comprising two or more multiplying structures integrated on a single chip, wherein each of the integrated multiplying structures are electrically identical and each of the multiplying structures include one input antenna (E-probe) for receiving an input signal in the millimeter-wave, submillimeter-wave or terahertz frequency range inputted on the chip, a stripline based input matching network electrically connecting the input antennas to two or more Schottky diodes in a balanced configuration, two or more Schottky diodes that are used as nonlinear semiconductor devices to generate harmonics out of the input signal and produce the multiplied output signal, stripline based output matching networks for transmitting the output signal from the Schottky diodes to an output antenna, and an output antenna (E-probe) for transmitting the output signal off the chip into the output waveguide transmission line.

Monte Carlo Simulation of THz Multipliers

NASA Technical Reports Server (NTRS)

East, J.; Blakey, P.

1997-01-01

Schottky Barrier diode frequency multipliers are critical components in submillimeter and Thz space based earth observation systems. As the operating frequency of these multipliers has increased, the agreement between design predictions and experimental results has become poorer. The multiplier design is usually based on a nonlinear model using a form of harmonic balance and a model for the Schottky barrier diode. Conventional voltage dependent lumped element models do a poor job of predicting THz frequency performance. This paper will describe a large signal Monte Carlo simulation of Schottky barrier multipliers. The simulation is a time dependent particle field Monte Carlo simulation with ohmic and Schottky barrier boundary conditions included that has been combined with a fixed point solution for the nonlinear circuit interaction. The results in the paper will point out some important time constants in varactor operation and will describe the effects of current saturation and nonlinear resistances on multiplier operation.

NULL Convention Floating Point Multiplier

PubMed Central

Ramachandran, Seshasayanan

2015-01-01

Floating point multiplication is a critical part in high dynamic range and computational intensive digital signal processing applications which require high precision and low power. This paper presents the design of an IEEE 754 single precision floating point multiplier using asynchronous NULL convention logic paradigm. Rounding has not been implemented to suit high precision applications. The novelty of the research is that it is the first ever NULL convention logic multiplier, designed to perform floating point multiplication. The proposed multiplier offers substantial decrease in power consumption when compared with its synchronous version. Performance attributes of the NULL convention logic floating point multiplier, obtained from Xilinx simulation and Cadence, are compared with its equivalent synchronous implementation. PMID:25879069

NULL convention floating point multiplier.

PubMed

Albert, Anitha Juliette; Ramachandran, Seshasayanan

2015-01-01

Floating point multiplication is a critical part in high dynamic range and computational intensive digital signal processing applications which require high precision and low power. This paper presents the design of an IEEE 754 single precision floating point multiplier using asynchronous NULL convention logic paradigm. Rounding has not been implemented to suit high precision applications. The novelty of the research is that it is the first ever NULL convention logic multiplier, designed to perform floating point multiplication. The proposed multiplier offers substantial decrease in power consumption when compared with its synchronous version. Performance attributes of the NULL convention logic floating point multiplier, obtained from Xilinx simulation and Cadence, are compared with its equivalent synchronous implementation.

The general ventilation multipliers calculated by using a standard Near-Field/Far-Field model.

PubMed

Koivisto, Antti J; Jensen, Alexander C Ø; Koponen, Ismo K

2018-05-01

In conceptual exposure models, the transmission of pollutants in an imperfectly mixed room is usually described with general ventilation multipliers. This is the approach used in the Advanced REACH Tool (ART) and Stoffenmanager® exposure assessment tools. The multipliers used in these tools were reported by Cherrie (1999; http://dx.doi.org/10.1080/104732299302530 ) and Cherrie et al. (2011; http://dx.doi.org/10.1093/annhyg/mer092 ) who developed them by positing input values for a standard Near-Field/Far-Field (NF/FF) model and then calculating concentration ratios between NF and FF concentrations. This study revisited the calculations that produce the multipliers used in ART and Stoffenmanager and found that the recalculated general ventilation multipliers were up to 2.8 times (280%) higher than the values reported by Cherrie (1999) and the recalculated NF and FF multipliers for 1-hr exposure were up to 1.2 times (17%) smaller and for 8-hr exposure up to 1.7 times (41%) smaller than the values reported by Cherrie et al. (2011). Considering that Stoffenmanager and the ART are classified as higher-tier regulatory exposure assessment tools, the errors is general ventilation multipliers should not be ignored. We recommend revising the general ventilation multipliers. A better solution is to integrate the NF/FF model to Stoffenmanager and the ART.

MULTIPLIER CIRCUIT

DOEpatents

Chase, R.L.

1963-05-01

An electronic fast multiplier circuit utilizing a transistor controlled voltage divider network is presented. The multiplier includes a stepped potentiometer in which solid state or transistor switches are substituted for mechanical wipers in order to obtain electronic switching that is extremely fast as compared to the usual servo-driven mechanical wipers. While this multiplier circuit operates as an approximation and in steps to obtain a voltage that is the product of two input voltages, any desired degree of accuracy can be obtained with the proper number of increments and adjustment of parameters. (AEC)

A New Approach for the Discovery of Antibiotics by Targeting Non-Multiplying Bacteria: A Novel Topical Antibiotic for Staphylococcal Infections

PubMed Central

Hu, Yanmin; Shamaei-Tousi, Alireza; Liu, Yingjun; Coates, Anthony

2010-01-01

In a clinical infection, multiplying and non-multiplying bacteria co-exist. Antibiotics kill multiplying bacteria, but they are very inefficient at killing non-multipliers which leads to slow or partial death of the total target population of microbes in an infected tissue. This prolongs the duration of therapy, increases the emergence of resistance and so contributes to the short life span of antibiotics after they reach the market. Targeting non-multiplying bacteria from the onset of an antibiotic development program is a new concept. This paper describes the proof of principle for this concept, which has resulted in the development of the first antibiotic using this approach. The antibiotic, called HT61, is a small quinolone-derived compound with a molecular mass of about 400 Daltons, and is active against non-multiplying bacteria, including methicillin sensitive and resistant, as well as Panton-Valentine leukocidin-carrying Staphylococcus aureus. It also kills mupirocin resistant MRSA. The mechanism of action of the drug is depolarisation of the cell membrane and destruction of the cell wall. The speed of kill is within two hours. In comparison to the conventional antibiotics, HT61 kills non-multiplying cells more effectively, 6 logs versus less than one log for major marketed antibiotics. HT61 kills methicillin sensitive and resistant S. aureus in the murine skin bacterial colonization and infection models. No resistant phenotype was produced during 50 serial cultures over a one year period. The antibiotic caused no adverse affects after application to the skin of minipigs. Targeting non-multiplying bacteria using this method should be able to yield many new classes of antibiotic. These antibiotics may be able to reduce the rate of emergence of resistance, shorten the duration of therapy, and reduce relapse rates. PMID:20676403

FORCE MULTIPLIER FOR USE WITH MASTER SLAVES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miles, L.E.; Parsons, T.C.; Howe, P.W.

1961-06-01

A force multiplier was designed. This piece of equipment was made to increase the gripping force presently available in the Model 8 master slave. The force multiplier described incorporates a clamp which can be quickly attached to and detached from the master slave hand. (auth)

Optimization of Passive Voltage Multipliers for Fast Start-up and Multi-voltage Power Supplies in Electromagnetic Energy Harvesting Systems

NASA Astrophysics Data System (ADS)

Yang, G.; Stark, B. H.; Burrow, S. G.; Hollis, S. J.

2014-11-01

This paper demonstrates the use of passive voltage multipliers for rapid start-up of sub-milliwatt electromagnetic energy harvesting systems. The work describes circuit optimization to make as short as possible the transition from completely depleted energy storage to the first powering-up of an actively controlled switched-mode converter. The dependency of the start-up time on component parameters and topologies is derived by simulation and experimentation. The resulting optimized multiplier design reduces the start-up time from several minutes to 1 second. An additional improvement uses the inherent cascade structure of the voltage multiplier to power sub-systems at different voltages. This multi-rail start-up is shown to reduce the circuit losses of the active converter by 72% with respect to the optimized single-rail system. The experimental results provide insight into the multiplier's transient behaviour, including circuit interactions, in a complete harvesting system, and offer important information to optimize voltage multipliers for rapid start-up.

12 CFR 327.9 - Assessment risk categories and pricing methods.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and a weighted average of CAMELS component ratings will be multiplied by a corresponding pricing... CAMELS component ratings is created by multiplying each component by the following percentages and adding... CAMELS Component Rating 1.095 * Ratios are expressed as percentages. ** Multipliers are rounded to three...

An Early Childhood Curriculum for Multiply Handicapped Children.

ERIC Educational Resources Information Center

Schattner, Regina

The guide for understanding the multidimensional educational problems of multiply handicapped children and for developing an appropriate curriculum and setting is addressed to teachers. Methods, materials, and a curriculum for working with young (ages 4-9 years) multiply handicapped children are presented. The program includes an enriched language…

40 CFR 423.15 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... sources shall not exceed the quantity determined by multiplying the flow of low volume waste sources times... metal cleaning wastes shall not exceed the quantity determined by multiplying the flow of chemical metal... transport water shall not exceed the quantity determined by multiplying the flow of the bottom ash transport...

Cavallo's multiplier for in situ generation of high voltage

NASA Astrophysics Data System (ADS)

Clayton, S. M.; Ito, T. M.; Ramsey, J. C.; Wei, W.; Blatnik, M. A.; Filippone, B. W.; Seidel, G. M.

2018-05-01

A classic electrostatic induction machine, Cavallo's multiplier, is suggested for in situ production of very high voltage in cryogenic environments. The device is suitable for generating a large electrostatic field under conditions of very small load current. Operation of the Cavallo multiplier is analyzed, with quantitative description in terms of mutual capacitances between electrodes in the system. A demonstration apparatus was constructed, and measured voltages are compared to predictions based on measured capacitances in the system. The simplicity of the Cavallo multiplier makes it amenable to electrostatic analysis using finite element software, and electrode shapes can be optimized to take advantage of a high dielectric strength medium such as liquid helium. A design study is presented for a Cavallo multiplier in a large-scale, cryogenic experiment to measure the neutron electric dipole moment.

Improved Algorithm For Finite-Field Normal-Basis Multipliers

NASA Technical Reports Server (NTRS)

Wang, C. C.

1989-01-01

Improved algorithm reduces complexity of calculations that must precede design of Massey-Omura finite-field normal-basis multipliers, used in error-correcting-code equipment and cryptographic devices. Algorithm represents an extension of development reported in "Algorithm To Design Finite-Field Normal-Basis Multipliers" (NPO-17109), NASA Tech Briefs, Vol. 12, No. 5, page 82.

Sociophysics of sexism: normal and anomalous petrie multipliers

NASA Astrophysics Data System (ADS)

Eliazar, Iddo

2015-07-01

A recent mathematical model by Karen Petrie explains how sexism towards women can arise in organizations where male and female are equally sexist. Indeed, the Petrie model predicts that such sexism will emerge whenever there is a male majority, and quantifies this majority bias by the ‘Petrie multiplier’: the square of the male/female ratio. In this paper—emulating the shift from ‘normal’ to ‘anomalous’ diffusion—we generalize the Petrie model to a stochastic Poisson model that accommodates heterogeneously sexist men and woman, and that extends the ‘normal’ quadratic Petrie multiplier to ‘anomalous’ non-quadratic multipliers. The Petrie multipliers span a full spectrum of behaviors which we classify into four universal types. A variation of the stochastic Poisson model and its Petrie multipliers is further applied to the context of cyber warfare.

Productivity cost calculations in health economic evaluations: correcting for compensation mechanisms and multiplier effects.

PubMed

Krol, Marieke; Brouwer, Werner B F; Severens, Johan L; Kaper, Janneke; Evers, Silvia M A A

2012-12-01

Productivity costs related to paid work are commonly calculated in economic evaluations of health technologies by multiplying the relevant number of work days lost with a wage rate estimate. It has been argued that actual productivity costs may either be lower or higher than current estimates due to compensation mechanisms and/or multiplier effects (related to team dependency and problems with finding good substitutes in cases of absenteeism). Empirical evidence on such mechanisms and their impact on productivity costs is scarce, however. This study aims to increase knowledge on how diminished productivity is compensated within firms. Moreover, it aims to explore how compensation and multiplier effects potentially affect productivity cost estimates. Absenteeism and compensation mechanisms were measured in a randomized trial among Dutch citizens examining the cost-effectiveness of reimbursement for smoking cessation treatment. Multiplier effects were extracted from published literature. Productivity costs were calculated applying the Friction Cost Approach. Regular estimates were subsequently adjusted for (i) compensation during regular working hours, (ii) job dependent multipliers and (iii) both compensation and multiplier effects. A total of 187 respondents included in the trial were useful for inclusion in this study, based on being in paid employment, having experienced absenteeism in the preceding six months and completing the questionnaire on absenteeism and compensation mechanisms. Over half of these respondents stated that their absenteeism was compensated during normal working hours by themselves or colleagues. Only counting productivity costs not compensated in regular working hours reduced the traditional estimate by 57%. Correcting for multiplier effects increased regular estimates by a quarter. Combining both impacts decreased traditional estimates by 29%. To conclude, large amounts of lost production are compensated in normal hours. Productivity costs estimates are strongly influenced by adjustment for compensation mechanisms and multiplier effects. The validity of such adjustments needs further examination, however. Copyright © 2012 Elsevier Ltd. All rights reserved.

A 2.5-2.7 THz Room Temperature Electronic Source

NASA Technical Reports Server (NTRS)

Maestrini, Alain; Mehdi, Imran; Lin, Robert; Siles, Jose Vicente; Lee, Choonsup; Gill, John; Chattopadhyay, Goutam; Schlecht, Erich; Bertrand, Thomas; Ward, John

2011-01-01

We report on a room temperature 2.5 to 2.7 THz electronic source based on frequency multipliers. The source utilizes a cascade of three frequency multipliers with W-band power amplifiers driving the first stage multiplier. Multiple-chip multipliers are utilized for the two initial stages to improve the power handling capability and a sub-micron anode is utilized for the final stage tripler. Room temperature measurements indicate that the source can put out a peak power of about 14 microwatts with more than 4 microwatts in the 2.5 to 2.7 THz range.

Multiplier Architecture for Coding Circuits

NASA Technical Reports Server (NTRS)

Wang, C. C.; Truong, T. K.; Shao, H. M.; Deutsch, L. J.

1986-01-01

Multipliers based on new algorithm for Galois-field (GF) arithmetic regular and expandable. Pipeline structures used for computing both multiplications and inverses. Designs suitable for implementation in very-large-scale integrated (VLSI) circuits. This general type of inverter and multiplier architecture especially useful in performing finite-field arithmetic of Reed-Solomon error-correcting codes and of some cryptographic algorithms.

Multiplier less high-speed squaring circuit for binary numbers

NASA Astrophysics Data System (ADS)

Sethi, Kabiraj; Panda, Rutuparna

2015-03-01

The squaring operation is important in many applications in signal processing, cryptography etc. In general, squaring circuits reported in the literature use fast multipliers. A novel idea of a squaring circuit without using multipliers is proposed in this paper. Ancient Indian method used for squaring decimal numbers is extended here for binary numbers. The key to our success is that no multiplier is used. Instead, one squaring circuit is used. The hardware architecture of the proposed squaring circuit is presented. The design is coded in VHDL and synthesised and simulated in Xilinx ISE Design Suite 10.1 (Xilinx Inc., San Jose, CA, USA). It is implemented in Xilinx Vertex 4vls15sf363-12 device (Xilinx Inc.). The results in terms of time delay and area is compared with both modified Booth's algorithm and squaring circuit using Vedic multipliers. Our proposed squaring circuit seems to have better performance in terms of both speed and area.

DNA-Cryptography-Based Obfuscated Systolic Finite Field Multiplier for Secure Cryptosystem in Smart Grid

NASA Astrophysics Data System (ADS)

Chen, Shaobo; Chen, Pingxiuqi; Shao, Qiliang; Basha Shaik, Nazeem; Xie, Jiafeng

2017-05-01

The elliptic curve cryptography (ECC) provides much stronger security per bits compared to the traditional cryptosystem, and hence it is an ideal role in secure communication in smart grid. On the other side, secure implementation of finite field multiplication over GF(2 m ) is considered as the bottle neck of ECC. In this paper, we present a novel obfuscation strategy for secure implementation of systolic field multiplier for ECC in smart grid. First, for the first time, we propose a novel obfuscation technique to derive a novel obfuscated systolic finite field multiplier for ECC implementation. Then, we employ the DNA cryptography coding strategy to obfuscate the field multiplier further. Finally, we obtain the area-time-power complexity of the proposed field multiplier to confirm the efficiency of the proposed design. The proposed design is highly obfuscated with low overhead, suitable for secure cryptosystem in smart grid.

Perceptually-Based Adaptive JPEG Coding

NASA Technical Reports Server (NTRS)

Watson, Andrew B.; Rosenholtz, Ruth; Null, Cynthia H. (Technical Monitor)

1996-01-01

An extension to the JPEG standard (ISO/IEC DIS 10918-3) allows spatial adaptive coding of still images. As with baseline JPEG coding, one quantization matrix applies to an entire image channel, but in addition the user may specify a multiplier for each 8 x 8 block, which multiplies the quantization matrix, yielding the new matrix for the block. MPEG 1 and 2 use much the same scheme, except there the multiplier changes only on macroblock boundaries. We propose a method for perceptual optimization of the set of multipliers. We compute the perceptual error for each block based upon DCT quantization error adjusted according to contrast sensitivity, light adaptation, and contrast masking, and pick the set of multipliers which yield maximally flat perceptual error over the blocks of the image. We investigate the bitrate savings due to this adaptive coding scheme and the relative importance of the different sorts of masking on adaptive coding.

Serial multiplier arrays for parallel computation

NASA Technical Reports Server (NTRS)

Winters, Kel

1990-01-01

Arrays of systolic serial-parallel multiplier elements are proposed as an alternative to conventional SIMD mesh serial adder arrays for applications that are multiplication intensive and require few stored operands. The design and operation of a number of multiplier and array configurations featuring locality of connection, modularity, and regularity of structure are discussed. A design methodology combining top-down and bottom-up techniques is described to facilitate development of custom high-performance CMOS multiplier element arrays as well as rapid synthesis of simulation models and semicustom prototype CMOS components. Finally, a differential version of NORA dynamic circuits requiring a single-phase uncomplemented clock signal introduced for this application.

Keynesian multiplier versus velocity of money

NASA Astrophysics Data System (ADS)

Wang, Yougui; Xu, Yan; Liu, Li

2010-08-01

In this paper we present the relation between Keynesian multiplier and the velocity of money circulation in a money exchange model. For this purpose we modify the original exchange model by constructing the interrelation between income and expenditure. The random exchange yields an agent's income, which along with the amount of money he processed determines his expenditure. In this interactive process, both the circulation of money and Keynesian multiplier effect can be formulated. The equilibrium values of Keynesian multiplier are demonstrated to be closely related to the velocity of money. Thus the impacts of macroeconomic policies on aggregate income can be understood by concentrating solely on the variations of money circulation.

Identification of multiply charged proteins and amino acid clusters by liquid nitrogen assisted spray ionization mass spectrometry.

PubMed

Kumar Kailasa, Suresh; Hasan, Nazim; Wu, Hui-Fen

2012-08-15

The development of liquid nitrogen assisted spray ionization mass spectrometry (LNASI MS) for the analysis of multiply charged proteins (insulin, ubiquitin, cytochrome c, α-lactalbumin, myoglobin and BSA), peptides (glutathione, HW6, angiotensin-II and valinomycin) and amino acid (arginine) clusters is described. The charged droplets are formed by liquid nitrogen assisted sample spray through a stainless steel nebulizer and transported into mass analyzer for the identification of multiply charged protein ions. The effects of acids and modifier volumes for the efficient ionization of the above analytes in LNASI MS were carefully investigated. Multiply charged proteins and amino acid clusters were effectively identified by LNASI MS. The present approach can effectively detect the multiply charged states of cytochrome c at 400 nM. A comparison between LNASI and ESI, CSI, SSI and V-EASI methods on instrumental conditions, applied temperature and observed charge states for the multiply charged proteins, shows that the LNASI method produces the good quality spectra of amino acid clusters at ambient conditions without applied any electric field and heat. To date, we believe that the LNASI method is the most simple, low cost and provided an alternative paradigm for production of multiply charged ions by LNASI MS, just as ESI-like ions yet no need for applying any electrical field and it could be operated at low temperature for generation of highly charged protein/peptide ions. Copyright © 2012 Elsevier B.V. All rights reserved.

Effective switching frequency multiplier inverter

DOEpatents

Su, Gui-Jia [Oak Ridge, TN; Peng, Fang Z [Okemos, MI

2007-08-07

A switching frequency multiplier inverter for low inductance machines that uses parallel connection of switches and each switch is independently controlled according to a pulse width modulation scheme. The effective switching frequency is multiplied by the number of switches connected in parallel while each individual switch operates within its limit of switching frequency. This technique can also be used for other power converters such as DC/DC, AC/DC converters.

7 CFR 1000.50 - Class prices, component prices, and advanced pricing factors.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., rounded to the nearest cent, shall be the protein price per pound times 3.1 plus the other solids price...) Multiply the protein price computed in paragraph (q)(1)(i) of this section by 3.1; (iii) Multiply the other... multiply the result by 1.383; (3) Add to the amount computed pursuant to paragraph (n)(2) of this section...

7 CFR 1000.50 - Class prices, component prices, and advanced pricing factors.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., rounded to the nearest cent, shall be the protein price per pound times 3.1 plus the other solids price...) Multiply the protein price computed in paragraph (q)(1)(i) of this section by 3.1; (iii) Multiply the other... multiply the result by 1.383; (3) Add to the amount computed pursuant to paragraph (n)(2) of this section...

SPECIAL ISSUE ON OPTICAL PROCESSING OF INFORMATION: Analysis of the precision parameters of an optoelectronic vector-matrix processor of digital information

NASA Astrophysics Data System (ADS)

Odinokov, S. B.; Petrov, A. V.

1995-10-01

Mathematical models of components of a vector-matrix optoelectronic multiplier are considered. Perturbing factors influencing a real optoelectronic system — noise and errors of radiation sources and detectors, nonlinearity of an analogue—digital converter, nonideal optical systems — are taken into account. Analytic expressions are obtained for relating the precision of such a multiplier to the probability of an error amounting to one bit, to the parameters describing the quality of the multiplier components, and to the quality of the optical system of the processor. Various methods of increasing the dynamic range of a multiplier are considered at the technical systems level.

Multiplier Accounting of Indian Mining Industry: The Application

NASA Astrophysics Data System (ADS)

Hussain, Azhar; Karmakar, Netai Chandra

2017-10-01

In the previous paper (Hussain and Karmakar in Inst Eng India Ser, 2014. doi: 10.1007/s40033-014-0058-0), the concepts of input-output transaction matrix and multiplier were explained in detail. Input-output multipliers are indicators used for predicting the total impact on an economy due to changes in its industrial demand and output which is calculated using transaction matrix. The aim of this paper is to present an application of the concepts with respect to the mining industry, showing progress in different sectors of mining with time and explaining different outcomes from the results obtained. The analysis shows that a few mineral industries saw a significant growth in their multiplier values over the years.

Projection-based stabilization of interface Lagrange multipliers in immersogeometric fluid-thin structure interaction analysis, with application to heart valve modeling.

PubMed

Kamensky, David; Evans, John A; Hsu, Ming-Chen; Bazilevs, Yuri

2017-11-01

This paper discusses a method of stabilizing Lagrange multiplier fields used to couple thin immersed shell structures and surrounding fluids. The method retains essential conservation properties by stabilizing only the portion of the constraint orthogonal to a coarse multiplier space. This stabilization can easily be applied within iterative methods or semi-implicit time integrators that avoid directly solving a saddle point problem for the Lagrange multiplier field. Heart valve simulations demonstrate applicability of the proposed method to 3D unsteady simulations. An appendix sketches the relation between the proposed method and a high-order-accurate approach for simpler model problems.

3D Bragg coherent diffractive imaging of five-fold multiply twinned gold nanoparticle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Jong Woo; Ulvestad, Andrew; Manna, Sohini

The formation mechanism of five-fold multiply twinned nanoparticles has been a long-term topic because of their geometrical incompatibility. So, various models have been proposed to explain how the internal structure of the multiply twinned nanoparticles accommodates the constraints of the solid-angle deficiency. Here, we investigate the internal structure, strain field and strain energy density of 600 nm sized five-fold multiply twinned gold nanoparticles quantitatively using Bragg coherent diffractive imaging, which is suitable for the study of buried defects and three-dimensional strain distribution with great precision. Our study reveals that the strain energy density in five-fold multiply twinned gold nanoparticles ismore » an order of magnitude higher than that of the single nanocrystals such as an octahedron and triangular plate synthesized under the same conditions. This result indicates that the strain developed while accommodating an angular misfit, although partially released through the introduction of structural defects, is still large throughout the crystal.« less

3D Bragg coherent diffractive imaging of five-fold multiply twinned gold nanoparticle

DOE PAGES

Kim, Jong Woo; Ulvestad, Andrew; Manna, Sohini; ...

2017-08-11

The formation mechanism of five-fold multiply twinned nanoparticles has been a long-term topic because of their geometrical incompatibility. So, various models have been proposed to explain how the internal structure of the multiply twinned nanoparticles accommodates the constraints of the solid-angle deficiency. Here, we investigate the internal structure, strain field and strain energy density of 600 nm sized five-fold multiply twinned gold nanoparticles quantitatively using Bragg coherent diffractive imaging, which is suitable for the study of buried defects and three-dimensional strain distribution with great precision. Our study reveals that the strain energy density in five-fold multiply twinned gold nanoparticles ismore » an order of magnitude higher than that of the single nanocrystals such as an octahedron and triangular plate synthesized under the same conditions. This result indicates that the strain developed while accommodating an angular misfit, although partially released through the introduction of structural defects, is still large throughout the crystal.« less

Temperature Effects in Varactors and Multipliers

NASA Technical Reports Server (NTRS)

East, J.; Mehdi, Imran

2001-01-01

Varactor diode multipliers are a critical part of many THz measurement systems. The power and efficiencies of these devices limit the available power for THz sources. Varactor operation is determined by the physics of the varactor device and a careful doping profile design is needed to optimize the performance. Higher doped devices are limited by junction breakdown and lower doped structures are limited by current saturation. Higher doped structures typically have higher efficiencies and lower doped structures typically have higher powers at the same operating frequency and impedance level. However, the device material properties are also a function of the operating temperature. Recent experimental evidence has shown that the power output of a multiplier can be improved by cooling the device. We have used a particle Monte Carlo simulation to investigate the temperature dependent velocity vs. electric field in GaAs. This information was then included in a nonlinear device circuit simulator to predict multiplier performance for various temperatures and device designs. This paper will describe the results of this analysis of temperature dependent multiplier operation.

7 CFR 1463.106 - Base quota levels for eligible tobacco producers.

Code of Federal Regulations, 2012 CFR

2012-01-01

...)—.952381 (iv) Virginia Sun-cured (type 37) 1.0000 3 Multiply the sum from Step 2 times the farm's average... (35-36)—.952381 (iv) Virginia Sun-cured (type 37) 1.0000 6 Multiply the sum from Step 5 times the farm... (35-36)—.94264 (iv) Virginia Sun-cured (type 37) 1.0000 3 Multiply the sum from Step 2 times the farm...

7 CFR 1463.106 - Base quota levels for eligible tobacco producers.

Code of Federal Regulations, 2013 CFR

2013-01-01

...)—.952381 (iv) Virginia Sun-cured (type 37) 1.0000 3 Multiply the sum from Step 2 times the farm's average... (35-36)—.952381 (iv) Virginia Sun-cured (type 37) 1.0000 6 Multiply the sum from Step 5 times the farm... (35-36)—.94264 (iv) Virginia Sun-cured (type 37) 1.0000 3 Multiply the sum from Step 2 times the farm...

7 CFR 1463.106 - Base quota levels for eligible tobacco producers.

Code of Federal Regulations, 2014 CFR

2014-01-01

...)—.952381 (iv) Virginia Sun-cured (type 37) 1.0000 3 Multiply the sum from Step 2 times the farm's average... (35-36)—.952381 (iv) Virginia Sun-cured (type 37) 1.0000 6 Multiply the sum from Step 5 times the farm... (35-36)—.94264 (iv) Virginia Sun-cured (type 37) 1.0000 3 Multiply the sum from Step 2 times the farm...

7 CFR 1463.106 - Base quota levels for eligible tobacco producers.

Code of Federal Regulations, 2011 CFR

2011-01-01

...)—.952381 (iv) Virginia Sun-cured (type 37) 1.0000 3 Multiply the sum from Step 2 times the farm's average... (35-36)—.952381 (iv) Virginia Sun-cured (type 37) 1.0000 6 Multiply the sum from Step 5 times the farm... (35-36)—.94264 (iv) Virginia Sun-cured (type 37) 1.0000 3 Multiply the sum from Step 2 times the farm...

Ceramic Electron Multiplier

DOE PAGES

Comby, G.

1996-10-01

The Ceramic Electron Multipliers (CEM) is a compact, robust, linear and fast multi-channel electron multiplier. The Multi Layer Ceramic Technique (MLCT) allows to build metallic dynodes inside a compact ceramic block. The activation of the metallic dynodes enhances their secondary electron emission (SEE). The CEM can be used in multi-channel photomultipliers, multi-channel light intensifiers, ion detection, spectroscopy, analysis of time of flight events, particle detection or Cherenkov imaging detectors. (auth)

FamNet: A Framework to Identify Multiplied Modules Driving Pathway Expansion in Plants1

PubMed Central

Tohge, Takayuki; Klie, Sebastian; Fernie, Alisdair R.

2016-01-01

Gene duplications generate new genes that can acquire similar but often diversified functions. Recent studies of gene coexpression networks have indicated that, not only genes, but also pathways can be multiplied and diversified to perform related functions in different parts of an organism. Identification of such diversified pathways, or modules, is needed to expand our knowledge of biological processes in plants and to understand how biological functions evolve. However, systematic explorations of modules remain scarce, and no user-friendly platform to identify them exists. We have established a statistical framework to identify modules and show that approximately one-third of the genes of a plant’s genome participate in hundreds of multiplied modules. Using this framework as a basis, we implemented a platform that can explore and visualize multiplied modules in coexpression networks of eight plant species. To validate the usefulness of the platform, we identified and functionally characterized pollen- and root-specific cell wall modules that multiplied to confer tip growth in pollen tubes and root hairs, respectively. Furthermore, we identified multiplied modules involved in secondary metabolite synthesis and corroborated them by metabolite profiling of tobacco (Nicotiana tabacum) tissues. The interactive platform, referred to as FamNet, is available at http://www.gene2function.de/famnet.html. PMID:26754669

Genetic and economic analyses of female replacement rates in the dam-daughter pathway of a hierarchical swine breeding structure.

PubMed

Faust, M A; Robison, O W; Tess, M W

1992-07-01

A stochastic life-cycle swine production model was used to study the effect of female replacement rates in the dam-daughter pathway for a tiered breeding structure on genetic change and returns to the breeder. Genetic, environmental, and economic parameters were used to simulate characteristics of individual pigs in a system producing F1 female replacements. Evaluated were maximum culling ages for nucleus and multiplier tier sows. System combinations included one- and five-parity alternatives for both levels and 10-parity options for the multiplier tier. Yearly changes and average phenotypic levels were computed for performance and economic measures. Generally, at the nucleus level, responses to 10 yr of selection for sow and pig performance in five-parity herds were 70 to 85% of response in one-parity herds. Similarly, the highest selection responses in multiplier herds were from systems with one-parity nucleus tiers. Responses in these were typically greater than 115% of the response for systems with the smallest yearly change, namely, the five-parity nucleus and five- and 10-parity multiplier levels. In contrast, the most profitable multiplier tiers (10-parity) had the lowest replacement costs. Within a multiplier culling strategy, rapid genetic change was desirable. Differences between systems that culled after five or 10 parities were smaller than differences between five- and one-parity multiplier options. To recover production costs, systems with the lowest returns required 140% of market hog value for gilts available to commercial tiers, whereas more economically efficient systems required no premium.

Stark problem in terms of the Stokes multipliers for the triconfluent Heun equation

NASA Astrophysics Data System (ADS)

Osherov, V. I.; Ushakov, V. G.

2013-11-01

The solution of the Stark problem is obtained in terms of the Stokes multipliers for the triconfluent Heun equation (the quartic oscillator equation). The Stokes multipliers are found in an analytical form at positive energies. For negative energies, the Stokes parameters are calculated in frames of a consistent asymptotic approach. The scattering phase, positions, and widths of the Stark resonances are determined as solutions of an implicit equation.

Effective size of certain macroscopic quantum superpositions.

PubMed

Dür, Wolfgang; Simon, Christoph; Cirac, J Ignacio

2002-11-18

Several experiments and experimental proposals for the production of macroscopic superpositions naturally lead to states of the general form /phi(1)>( multiply sign in circle N)+/phi 2 >( multiply sign in circle N), where the number of subsystems N is very large, but the states of the individual subsystems have large overlap, // 2=1-epsilon 2. We propose two different methods for assigning an effective particle number to such states, using ideal Greenberger-Horne-Zeilinger states of the form /0>( multiply sign in circle n)+/1>( multiply sign in circle n) as a standard of comparison. The two methods are based on decoherence and on a distillation protocol, respectively. Both lead to an effective size n of the order of N epsilon 2.

Non-cross talk multi-channel photomultiplier using guided electron multipliers

DOEpatents

Gomez, J.; Majewski, S.; Weisenberger, A.G.

1995-09-26

An improved multi-channel electron multiplier is provided that exhibits zero cross-talk and high rate operation. Resistive material input and output masks are employed to control divergence of electrons. Electron multiplication takes place in closed channels. Several embodiments are provided for these channels including a continuous resistive emissive multiplier and a discrete resistive multiplier with discrete dynode chains interspaced with resistive layers-masks. Both basic embodiments provide high gain multiplication of electrons without accumulating surface charges while containing electrons to their proper channels to eliminate cross-talk. The invention can be for example applied to improve the performance of ion mass spectrometers, positron emission tomography devices, in DNA sequencing and other beta radiography applications and in many applications in particle physics. 28 figs.

Non cross talk multi-channel photomultiplier using guided electron multipliers

DOEpatents

Gomez, Javier; Majewski, Stanislaw; Weisenberger, Andrew G.

1995-01-01

An improved multi-channel electron multiplier is provided that exhibits zero cross-talk and high rate operation. Resistive material input and output masks are employed to control divergence of electrons. Electron multiplication takes place in closed channels. Several embodiments are provided for these channels including a continuous resistive emissive multiplier and a discrete resistive multiplier with discrete dynode chains interspaced with resistive layers-masks. Both basic embodiments provide high gain multiplication of electrons without accumulating surface charges while containing electrons to their proper channels to eliminate cross-talk. The invention can be for example applied to improve the performance of ion mass spectrometers, positron emission tomography devices, in DNA sequencing and other beta radiography applications and in many applications in particle physics.

Effect of magnetic field configuration on the multiply charged ion and plume characteristics in Hall thruster plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Holak; Lim, Youbong; Choe, Wonho, E-mail: wchoe@kaist.ac.kr

2015-04-13

Multiply charged ions and plume characteristics in Hall thruster plasmas are investigated with regard to magnetic field configuration. Differences in the plume shape and the fraction of ions with different charge states are demonstrated by the counter-current and co-current magnetic field configurations, respectively. The significantly larger number of multiply charged and higher charge state ions including Xe{sup 4+} are observed in the co-current configuration than in the counter-current configuration. The large fraction of multiply charged ions and high ion currents in this experiment may be related to the strong electron confinement, which is due to the strong magnetic mirror effectmore » in the co-current magnetic field configuration.« less

Representation of the inverse of a frame multiplier.

PubMed

Balazs, P; Stoeva, D T

2015-02-15

Certain mathematical objects appear in a lot of scientific disciplines, like physics, signal processing and, naturally, mathematics. In a general setting they can be described as frame multipliers, consisting of analysis, multiplication by a fixed sequence (called the symbol), and synthesis. In this paper we show a surprising result about the inverse of such operators, if any, as well as new results about a core concept of frame theory, dual frames. We show that for semi-normalized symbols, the inverse of any invertible frame multiplier can always be represented as a frame multiplier with the reciprocal symbol and dual frames of the given ones. Furthermore, one of those dual frames is uniquely determined and the other one can be arbitrarily chosen. We investigate sufficient conditions for the special case, when both dual frames can be chosen to be the canonical duals. In connection to the above, we show that the set of dual frames determines a frame uniquely. Furthermore, for a given frame, the union of all coefficients of its dual frames is dense in [Formula: see text]. We also introduce a class of frames (called pseudo-coherent frames), which includes Gabor frames and coherent frames, and investigate invertible pseudo-coherent frame multipliers, allowing a classification for frame-type operators for these frames. Finally, we give a numerical example for the invertibility of multipliers in the Gabor case.

Design of multiplier-less sharp transition width non-uniform filter banks using gravitational search algorithm

NASA Astrophysics Data System (ADS)

Bindiya T., S.; Elias, Elizabeth

2015-01-01

In this paper, multiplier-less near-perfect reconstruction tree-structured filter banks are proposed. Filters with sharp transition width are preferred in filter banks in order to reduce the aliasing between adjacent channels. When sharp transition width filters are designed as conventional finite impulse response filters, the order of the filters will become very high leading to increased complexity. The frequency response masking (FRM) method is known to result in linear-phase sharp transition width filters with low complexity. It is found that the proposed design method, which is based on FRM, gives better results compared to the earlier reported results, in terms of the number of multipliers when sharp transition width filter banks are needed. To further reduce the complexity and power consumption, the tree-structured filter bank is made totally multiplier-less by converting the continuous filter bank coefficients to finite precision coefficients in the signed power of two space. This may lead to performance degradation and calls for the use of a suitable optimisation technique. In this paper, gravitational search algorithm is proposed to be used in the design of the multiplier-less tree-structured uniform as well as non-uniform filter banks. This design method results in uniform and non-uniform filter banks which are simple, alias-free, linear phase and multiplier-less and have sharp transition width.

Study of the peptide length and amino acid specific substitution in the antigenic activity of the chimeric synthetic peptides, containing the p19 core and gp46 envelope proteins of the HTLV-I virus.

PubMed

Marin, Milenen Hernández; Rodríguez-Tanty, Chryslaine; Higginson-Clarke, David; Bocalandro, Yadaris Márquez; Peña, Lilliam Pozo

2005-10-28

Four chimeric synthetic peptides (Q5, Q6, Q7(multiply sign in circle), and Q8(multiply sign in circle)), incorporating immunodominant epitopes of the core p19 (105-124 a.a.) and envelope gp46 proteins (175-205 a.a.), of HTLV-I were obtained. Also, two gp46 monomeric peptides M4 and M5(multiply sign in circle) (Ser at position 192) were synthesized. The analysis of the influence of the peptide lengths and the proline to serine substitution on the chimeric and monomeric peptides' antigenicity, with regard to the chimeric peptides Q1, Q2, Q3(multiply sign in circle), and Q4(multiply sign in circle), reported previously, for HTLV-I was carried out. The peptides' antigenicity was evaluated in an ultramicroenzyme-linked immunosorbent assay (UMELISA) using sera of HTLV-I/II. The peptides' antigenicity was affected appreciably by the change of the peptide length and amino acid substitutions into the immunodominant sequence of gp46 peptide.

Evaluating and Stimulating Vision in the Multiply Impaired.

ERIC Educational Resources Information Center

Jose, Randall T.; And Others

1980-01-01

Techniques for evaluating the multiply impaired child's functional level of vision are described and a sequence of visual stimulation instruction for children with visual impairments is presented. (PHR)

In-situ and elementally resolved determination of the thickness uniformity of multi-ply films by confocal micro XRF.

PubMed

Peng, Song; Liu, Zhiguo; Sun, Tianxi; Wang, Guangfu; Ma, Yongzhong; Ding, Xunliang

2014-08-01

Confocal micro X-ray fluorescence (CM-XRF) with quasi-monochromatic excitation based on polycapillary X-ray optics was used to measure the thickness of multi-ply films. The relative errors of measuring an Fe film with a thickness of 16.3 μm and a Cu film with a thickness of 24.5 μm were 7.3% and 0.4%, respectively. The non-destructive and in-situ measurement of the thickness and uniformity of multi-ply films of Cu, Fe and Ni on a silicon surface was performed. CM-XRF was convenient in in-situ and elementally resolved analysis of the thickness of multi-ply films without a cumbersome theoretical correction model. Copyright © 2014 Elsevier Ltd. All rights reserved.

Cross Correlations for Two-Dimensional Geosynchronous Satellite Imagery Data,

DTIC Science & Technology

1980-04-01

transform of f(x), g(x,u) is the forward transformation kernel, and u assumes values in the range 0, 1, .. ,N-i. Similarly, the inverse transform is given...transform for values of u and v in the range, 0, 1, 2, ..., N-1. To obtain the inverse transform we pre-multiply and post-multiply Eq. (5-7) by an inverse...any algorithm for computing the forward transform can be used directly to obtain the inverse transform simply by multiplying the result of the

A 260-340 GHz Dual Chip Frequency Tripler for THz Frequency Multiplier Chains

NASA Technical Reports Server (NTRS)

Maestrini, Alain; Tripon-Canseliet, Charlotte; Ward, John S.; Gill, John J.; Mehdi, Imran

2006-01-01

We designed and fabricated a fix-tuned balanced frequency tripler working in the 260-340 GHz band to be the first stage of a x3x3x3 multiplier chain to 2.7 THz. The design of a dual-chip version of this multiplier featuring an input splitter / output combiner as part of the input / output matching networks of both chips - with no degradation of the expected bandwidth and efficiency- will be presented.

Automobile Industry Retail Price Equivalent and Indirect Cost ...

EPA Pesticide Factsheets

This report develops a modified multiplier, referred to as an indirect cost (IC) multiplier, which specifically evaluates the components of indirect costs that are likely to be affected by vehicle modifications associated with environmental regulation. A range of IC multipliers are developed that 1) account for differences in the technical complexity of required vehicle modifications and 2) adjust over time as new technologies become assimilated into the automotive production process. To develop an improved methodology for estimating indirect costs of new environmental regulations on automobile manufacturers.

Cross-gender Social Normative Effects for Violence in Middle School: Do Girls Carry a Social Multiplier Effect for At-risk Boys?

PubMed Central

Pasch, Keryn E.; Brown, H. Shelton; Perry, Cheryl L.; Komro, Kelli A.

2014-01-01

A social multiplier effect is a social interaction in which the behavior of a person in a social network varies with the normative behavior of others in the network, also known as an endogenous interaction. Policies and intervention efforts can harness social multiplier effects because, in theory, interventions on a subset of individuals will have “spillover effects” on other individuals in the network. This study investigates potential social multiplier effects for violence in middle schools, and whether there is evidence for a social multiplier effect transmitted from girls to boys. Three years of longitudinal data (2003–2005) from Project Northland Chicago (PNC) were used to investigate this question, with a sample consisting of youth in Grades 6 through 8 in 61 Chicago Public Schools (N = 4233 at Grade 6, N = 3771 at Grade 7, and N = 3793 at Grade 8). The sample was 49.3% female, and primarily African American (41.9%) and Latino/a (28.7%), with smaller proportions of whites (12.9%), Asians (5.2%) and other ethnicities. Results from two sets of regression models estimating the effects of 20th (low), 50th (average), and 80th (high) percentile scores for girls and boys on levels of violence in each gender group revealed evidence for social multiplier effects. Specifically, boys and girls were both influenced by social multiplier effects within their own gender group, and boys were also affected by normative violence scores among girls, typically those of the best-behaved (20th percentile) girls. The finding that girls may have positive social influence on boys’ levels of violent behavior extends prior findings of beneficial social effects of girls on boys in the domains of education and risky driving. Further, this social normative effect presents a potential opportunity to improve school-based intervention efforts for reducing violence among youth by leveraging girls as carriers of a social multiplier effect for reduced violence in the middle school environmental context, particularly among boys, who are at greater risk. PMID:24567165

A structural analysis of small vapor-deposited 'multiply twinned' gold particles

NASA Technical Reports Server (NTRS)

Yang, C. Y.; Heinemann, K.; Yacaman, M. J.; Poppa, H.

1979-01-01

High resolution selected zone dark field, Bragg reflection imaging and weak beam dark field techniques of transmission electron microscopy were used to determine the structure of small gold particles vapor deposited on NaCl substrates. Attention was focused on the analysis of those particles in the 50-150 A range that have pentagonal or hexagonal bright field profiles. These particles have been previously described as multiply twinned crystallites composed of face-centered cubic tetrahedra. The experimental evidence of the present studies can be interpreted on the assumption that the particle structure is a regular icosahedron or decahedron for the hexagonal or the pentagonal particles respectively. The icosahedron is a multiply twinned rhombohedral crystal and the decahedron is a multiply twinned body-centered orthorhombic crystal, each of which constitutes a slight distortion from the face-centered cubic structure.

Coherent Raman scattering with incoherent light for a multiply resonant mixture: Theory

NASA Astrophysics Data System (ADS)

Kirkwood, Jason C.; Ulness, Darin J.; Stimson, Michael J.; Albrecht, A. C.

1998-02-01

The theory for coherent Raman scattering (CRS) with broadband incoherent light is presented for a multiply resonant, multicomponent mixture of molecules that exhibits simultaneous multiple resonances with the frequencies of the driving fields. All possible pairwise hyperpolarizability contributions to the signal intensity are included in the theoretical treatment-(resonant-resonant, resonant-nonresonant, and nonresonant-nonresonant correlations between chromophores) and it is shown how the different types of correlations manifest themselves as differently behaved components of the signal intensity. The Raman resonances are modeled as Lorentzians in the frequency domain, as is the spectral density of the incoherent light. The analytic results for this multiply resonant mixture are presented and applied to a specific binary mixture. These analytic results will be used to recover frequencies and dephasing times in a series of experiments on multiply resonant mixtures.

Miniaturized High-Speed Modulated X-Ray Source

NASA Technical Reports Server (NTRS)

Gendreau, Keith C. (Inventor); Arzoumanian, Zaven (Inventor); Kenyon, Steven J. (Inventor); Spartana, Nick Salvatore (Inventor)

2015-01-01

A miniaturized high-speed modulated X-ray source (MXS) device and a method for rapidly and arbitrarily varying with time the output X-ray photon intensities and energies. The MXS device includes an ultraviolet emitter that emits ultraviolet light, a photocathode operably coupled to the ultraviolet light-emitting diode that emits electrons, an electron multiplier operably coupled to the photocathode that multiplies incident electrons, and an anode operably coupled to the electron multiplier that is configured to produce X-rays. The method for modulating MXS includes modulating an intensity of an ultraviolet emitter to emit ultraviolet light, generating electrons in response to the ultraviolet light, multiplying the electrons to become more electrons, and producing X-rays by an anode that includes a target material configured to produce X-rays in response to impact of the more electrons.

The effect of friend selection on social influences in obesity.

PubMed

Trogdon, Justin G; Allaire, Benjamin T

2014-12-01

We present an agent-based model of weight choice and peer selection that simulates the effect of peer selection on social multipliers for weight loss interventions. The model generates social clustering around weight through two mechanisms: a causal link from others' weight to an individual's weight and the propensity to select peers based on weight. We simulated weight loss interventions and tried to identify intervention targets that maximized the spillover of weight loss from intervention participants to nonparticipants. Social multipliers increase with the number of intervention participants' friends. For example, when friend selection was based on a variable exogenous to weight, the weight lost among non-participants increased by 23% (14.3lb vs. 11.6lb) when targeting the most popular obese. Holding constant the number of participants' friends, multipliers increase with increased weight clustering due to selection, up to a point. For example, among the most popular obese, social multipliers when matching on a characteristic correlated with weight (1.189) were higher than when matching on the exogenous characteristic (1.168) and when matching on weight (1.180). Increased weight clustering also implies more obese "friends of friends" of participants, who reduce social multipliers. Copyright © 2014 Elsevier B.V. All rights reserved.

Information asymmetry and deception.

PubMed

Clots-Figueras, Irma; Hernán-González, Roberto; Kujal, Praveen

2015-01-01

Situations such as an entrepreneur overstating a project's value, or a superior choosing to under or overstate the gains from a project to a subordinate are common and may result in acts of deception. In this paper we modify the standard investment game in the economics literature to study the nature of deception. In this game a trustor (investor) can send a given amount of money to a trustee (or investee). The amount received is multiplied by a certain amount, k, and the investee then decides on how to divide the total amount received. In our modified game the information on the multiplier, k, is known only to the investee and she can send a non-binding message to the investor regarding its value. We find that 66% of the investees send false messages with both under and over, statement being observed. Investors are naive and almost half of them believe the message received. We find greater lying when the distribution of the multiplier is unknown by the investors than when they know the distribution. Further, messages make beliefs about the multiplier more pessimistic when the investors know the distribution of the multiplier, while the opposite is true when they do not know the distribution.

Information asymmetry and deception

PubMed Central

Clots-Figueras, Irma; Hernán-González, Roberto; Kujal, Praveen

2015-01-01

Situations such as an entrepreneur overstating a project's value, or a superior choosing to under or overstate the gains from a project to a subordinate are common and may result in acts of deception. In this paper we modify the standard investment game in the economics literature to study the nature of deception. In this game a trustor (investor) can send a given amount of money to a trustee (or investee). The amount received is multiplied by a certain amount, k, and the investee then decides on how to divide the total amount received. In our modified game the information on the multiplier, k, is known only to the investee and she can send a non-binding message to the investor regarding its value. We find that 66% of the investees send false messages with both under and over, statement being observed. Investors are naive and almost half of them believe the message received. We find greater lying when the distribution of the multiplier is unknown by the investors than when they know the distribution. Further, messages make beliefs about the multiplier more pessimistic when the investors know the distribution of the multiplier, while the opposite is true when they do not know the distribution. PMID:26257615

Open-loop digital frequency multiplier

NASA Technical Reports Server (NTRS)

Moore, R. C.

1977-01-01

Monostable multivibrator is implemented by using digital integrated circuits where multiplier constant is too large for conventional phase-locked-loop integrated circuit. A 400 Hz clock is generated by divide-by-N counter from 1 Hz timing reference.

Extreme ultraviolet spectra of multiply charged tungsten ions

NASA Astrophysics Data System (ADS)

Mita, Momoe; Sakaue, Hiroyuki A.; Kato, Daiji; Murakami, Izumi; Nakamura, Nobuyuki

2017-11-01

We present extreme ultraviolet spectra of multiply charged tungsten ions observed with an electron beam ion trap. The observed spectra are compared with previous experimental results and theoretical spectra obtained with a collisional radiative model.

A new VLSI complex integer multiplier which uses a quadratic-polynomial residue system with Fermat numbers

NASA Technical Reports Server (NTRS)

Truong, T. K.; Hsu, I. S.; Chang, J. J.; Shyu, H. C.; Reed, I. S.

1986-01-01

A quadratic-polynomial Fermat residue number system (QFNS) has been used to compute complex integer multiplications. The advantage of such a QFNS is that a complex integer multiplication requires only two integer multiplications. In this article, a new type Fermat number multiplier is developed which eliminates the initialization condition of the previous method. It is shown that the new complex multiplier can be implemented on a single VLSI chip. Such a chip is designed and fabricated in CMOS-pw technology.

A new VLSI complex integer multiplier which uses a quadratic-polynomial residue system with Fermat numbers

NASA Technical Reports Server (NTRS)

Shyu, H. C.; Reed, I. S.; Truong, T. K.; Hsu, I. S.; Chang, J. J.

1987-01-01

A quadratic-polynomial Fermat residue number system (QFNS) has been used to compute complex integer multiplications. The advantage of such a QFNS is that a complex integer multiplication requires only two integer multiplications. In this article, a new type Fermat number multiplier is developed which eliminates the initialization condition of the previous method. It is shown that the new complex multiplier can be implemented on a single VLSI chip. Such a chip is designed and fabricated in CMOS-Pw technology.

A Methodology for Examining Collateral Effects on Military Operations during a Chemical, Biological, Radiological, and/or Nuclear Attack - Operational Effectiveness Loss Multiplier (OELM)

DTIC Science & Technology

2015-04-01

Operational Effectiveness Loss Multiplier (OELM) Deena S. Disraelly G. James Herrera Margaret H. Katz Jessica L. Knight Lucas A. LaViolet Terri J . Walsh...Multiplier (OELM) Deena S. Disraelly G. James Herrera Margaret H. Katz Jessica L. Knight Lucas A. LaViolet Terri J . Walsh Robert A. Zirkle I N...ELEMENT NO(S). 6. AUTHOR(S) 5d. PROJECT NO. Deena S. Disraelly, G. James Herrera, Margaret H. Katz, Jessica L. Knight, Lucas A. LaViolet, Terri J

A Methodology for Examining Collateral Effects on Military Operations during a Chemical, Biological, Radiological, and/or Nuclear Attack-Operational Effectiveness Loss Multiplier (OELM)

DTIC Science & Technology

2015-04-01

Operational Effectiveness Loss Multiplier (OELM) Deena S. Disraelly G. James Herrera Margaret H. Katz Jessica L. Knight Lucas A. LaViolet Terri J . Walsh...Multiplier (OELM) Deena S. Disraelly G. James Herrera Margaret H. Katz Jessica L. Knight Lucas A. LaViolet Terri J . Walsh Robert A. Zirkle I N...James Herrera, Margaret H. Katz, Jessica L. Knight, Lucas A. LaViolet, Terri J . Walsh, and Robert A. Zirkle 5e. TASK NO. DC-6-3250 5f. WORK UNIT

Evaluation of floating-point sum or difference of products in carry-save domain

NASA Technical Reports Server (NTRS)

Wahab, A.; Erdogan, S.; Premkumar, A. B.

1992-01-01

An architecture to evaluate a 24-bit floating-point sum or difference of products using modified sequential carry-save multipliers with extensive pipelining is described. The basic building block of the architecture is a carry-save multiplier with built-in mantissa alignment for the summation during the multiplication cycles. A carry-save adder, capable of mantissa alignment, correctly positions products with the current carry-save sum. Carry propagation in individual multipliers is avoided and is only required once to produce the final result.

Real-Time Reed-Solomon Decoder

NASA Technical Reports Server (NTRS)

Maki, Gary K.; Cameron, Kelly B.; Owsley, Patrick A.

1994-01-01

Generic Reed-Solomon decoder fast enough to correct errors in real time in practical applications designed to be implemented in fewer and smaller very-large-scale integrated, VLSI, circuit chips. Configured to operate in pipelined manner. One outstanding aspect of decoder design is that Euclid multiplier and divider modules contain Galoisfield multipliers configured as combinational-logic cells. Operates at speeds greater than older multipliers. Cellular configuration highly regular and requires little interconnection area, making it ideal for implementation in extraordinarily dense VLSI circuitry. Flight electronics single chip version of this technology implemented and available.

Gain degradation and efficiencies of spiral electron multipliers

NASA Technical Reports Server (NTRS)

Judge, R. J. R.; Palmer, D. A.

1973-01-01

The characteristics of spiral electron multipliers as functions of accumulated counts were investigated. The mean gain of the multipliers showed a steady decline from about 100 million when new, to about one million after 100 billion events when biased in a saturation mode. For prolonged use in a space environment, improved life expectancy might be obtained with a varying bias voltage adjusted to maintain the gain comfortably above a given discrimination level. Pulse-height distributions at various stages of the lifetime and variations of efficiency with energy of detected electrons are presented.

Une formulation variationnelle du problème de contact avec frottement de Coulomb

NASA Astrophysics Data System (ADS)

Le van, Anh; Nguyen, Tai H. T.

2008-07-01

A variational relationship is proposed as the weak form of the large deformation contact problem with Coulomb friction. It is a mixed relationship involving both the displacements and the multipliers; the weighting functions are the virtual displacements and the virtual multipliers. It is shown that the proposed weak form is equivalent to the strong form of the initial/boundary value contact problem and the multipliers are equal to the contact tractions. To cite this article: A. Le van, T.H.T. Nguyen, C. R. Mecanique 336 (2008).

Bandpass x-ray diode and x-ray multiplier detector

DOEpatents

Wang, C.L.

1982-09-27

An absorption-edge of an x-ray absorption filter and a quantum jump of a photocathode determine the bandpass characteristics of an x-ray diode detector. An anode, which collects the photoelectrons emitted by the photocathode, has enhanced amplification provided by photoelectron-multiplying means which include dynodes or a microchannel-plate electron-multiplier. Suppression of undesired high frequency response for a bandpass x-ray diode is provided by subtracting a signal representative of energies above the passband from a signal representative of the overall response of the bandpass diode.

Enhancing shelf life of minimally processed multiplier onion using silicone membrane.

PubMed

Naik, Ravindra; Ambrose, Dawn C P; Raghavan, G S Vijaya; Annamalai, S J K

2014-12-01

The aim of storage of minimal processed product is to increase the shelf life and thereby extend the period of availability of minimally processed produce. The silicone membrane makes use of the ability of polymer to permit selective passage of gases at different rates according to their physical and chemical properties. Here, the product stored maintains its own atmosphere by the combined effects of respiration process of the commodity and the diffusion rate through the membrane. A study was undertaken to enhance the shelf life of minimally processed multiplier onion with silicone membrane. The respiration activity was recorded at a temperature of 30 ± 2 °C (RH = 60 %) and 5 ± 1 °C (RH = 90 %). The respiration was found to be 23.4, 15.6, 10 mg CO2kg(-1)h(-1) at 5 ± 1 °C and 140, 110, 60 mg CO2kg(-1) h(-1) at 30 ± 2° for the peeled, sliced and diced multiplier onion, respectively. The respiration rate for the fresh multiplier onion was recorded to be 5, 10 mg CO2kg(-1) h(-1) at 5 ± 1 °C and 30 ± 1 ° C, respectively. Based on the shelf life studies and on the sensory evaluation, it was found that only the peeled multiplier onion could be stored. The sliced and diced multiplier onion did not have the required shelf life. The shelf life of the multiplier onion in the peel form could be increased from 4-5 days to 14 days by using the combined effect of silicone membrane (6 cm(2)/kg) and low temperature (5 ± 1 °C).

Importance of interferon alpha in the resistance of allogeneic C57B1/6 mice to the multiplication of Friend erythroleukemia cells in the liver.

PubMed

Gresser, I; Maury, C; Bandu, M T; Belardelli, F

1990-02-15

Friend erythroleukemia cells (FLC) (H-2d) injected intravenously multiply extensively in the livers of syngeneic DBA/2 mice and not at all in the livers of allogeneic C57B1/6 mice. Our results indicate that interferon alpha (IFN-alpha) is an important factor in the resistance of allogeneic mice to the multiplication of FLC in the liver. (a) After i.v. inoculation of FLC there was an inverse correlation between the presence of IFN-alpha in the serum and the capacity of FLC to multiply in the liver. Thus, all 44 FLC-injected adult C57B1/6 mice had circulating IFN-alpha and FLC did not multiply in the liver of any of the mice. Interferon was not detected in the serum of 83% of 41 FLC-injected DBA/2 mice (and was found only at a low titer in 17% of the mice) and FLC multiplied in the liver of all mice. (b) FLC did multiply in the livers of newborn C57B1/6 mice and in the livers of irradiated adult C57B1/6 mice, and IFN-alpha was not detected in their sera. In contrast, after i.v. inoculation of FLC, IFN-alpha was detected in the sera of 3-week-old and athymic nu/nu adult C57B1/6 mice while FLC failed to multiply in the liver. (c) FLC also induced IFN-alpha in congenic B10.D2 (H-2d) mice and FLC did not multiply in the liver. We suggest that, depending on the site of tumor implantation, different host mechanisms have various degrees of importance in controlling the growth and/or rejection of allogeneic tumor cells, and that IFN-alpha is particularly important when FLC are injected i.v.

5 CFR 842.403 - Compution of basic annuity.

Code of Federal Regulations, 2011 CFR

2011-01-01

... annuity of an employee or Member is 1 percent of average pay multiplied by total service. (b) The annuity of an employee is 1.1 percent of average pay multiplied by total service, provided the individual— (1...

5 CFR 842.403 - Compution of basic annuity.

Code of Federal Regulations, 2010 CFR

2010-01-01

... annuity of an employee or Member is 1 percent of average pay multiplied by total service. (b) The annuity of an employee is 1.1 percent of average pay multiplied by total service, provided the individual— (1...

A thermal model of the economy

NASA Astrophysics Data System (ADS)

Arroyo Colon, Luis Balbino

The motivation for this work came from an interest in Economics (particularly since the 2008 economic downturn) and a desire to use the tools of physics in a field that has not been the subject of great exploration. We propose a model of economics in analogy to thermodynamics and introduce the concept of the Value Multiplier as a fundamental addition to any such model. Firstly, we attempt to make analogies between some economic concepts and fundamental concepts of thermal physics. Then we introduce the value multiplier and justify its existence in our system; the value multiplier allows us to account for some intangible, psychological elements of the value of goods and services. We finally bring all the elements together in a qualitative system. In particular, we attempt to make an analogy with the Keynesian Multiplier that justifies the usefulness of fiscal stimulus in severe economic downturns. ii

MULTIPLY: Development of a European HSRL Airborne Facility

NASA Astrophysics Data System (ADS)

Binietoglou, Ioannis; Serikov, Ilya; Nicolae, Doina; Amiridis, Vassillis; Belegante, Livio; Boscornea, Andrea; Brugmann, Bjorn; Costa Suros, Montserrat; Hellmann, David; Kokkalis, Panagiotis; Linne, Holger; Stachlewska, Iwona; Vajaiac, Sorin-Nicolae

2016-08-01

MULTIPLY is a novel airborne high spectral resolution lidar (HSRL) currently under development by a consortium of European institutions from Romania, Germany, Greece, and Poland. Its aim is to contribute to calibration and validations activities of the upcoming ESA aerosol sensing missions like ADM-Aeolus, EarthCARE and the Sentinel-3/-4/-5/-5p which include products related to atmospheric aerosols. The effectiveness of these missions depends on independent airborne measurements to develop and test the retrieval methods, and validate mission products following launch. The aim of ESA's MULTIPLY project is to design, develop, and test a multi-wavelength depolarization HSRL for airborne applications. The MULTIPLY lidar will deliver the aerosol extinction and backscatter coefficient profiles at three wavelengths (355nm, 532nm, 1064nm), as well as profiles of aerosol intensive parameters (Ångström exponents, extinction- to-backscatter ratios, and linear particle depolarization ratios).

The formation of molecules in interstellar clouds from singly and multiply ionized atoms

NASA Technical Reports Server (NTRS)

Langer, W. D.

1978-01-01

The suggestion is considered that multiply ionized atoms produced by K- and L-shell X-ray ionization and cosmic-ray ionization can undergo ion-molecule reactions and also initiate molecule production. The role of X-rays in molecule production in general is discussed, and the contribution to molecule production of the C(+) radiative association with hydrogen is examined. Such gas-phase reactions of singly and multiply ionized atoms are used to calculate molecular abundances of carbon-, nitrogen-, and oxygen-bearing species. The column densities of the molecules are evaluated on the basis of a modified version of previously developed isobaric cloud models. It is found that reactions of multiply ionized carbon with H2 can contribute a significant fraction of the observed CH in diffuse interstellar clouds in the presence of diffuse X-ray structures or discrete X-ray sources and that substantial amounts of CH(+) can be produced under certain conditions.

Multi-MW K-Band Harmonic Multiplier: RF Source For High-Gradient Accelerator R & D

NASA Astrophysics Data System (ADS)

Solyak, N. A.; Yakovlev, V. P.; Kazakov, S. Yu.; Hirshfield, J. L.

2009-01-01

A preliminary design is presented for a two-cavity harmonic multiplier, intended as a high-power RF source for use in experiments aimed at developing high-gradient structures for a future collider. The harmonic multiplier is to produce power at selected frequencies in K-band (18-26.5 GHz) using as an RF driver an XK-5 S-band klystron (2.856 GHz). The device is to be built with a TE111 rotating mode input cavity and interchangeable output cavities running in the TEn11 rotating mode, with n = 7,8,9 at 19.992, 22.848, and 25.704 GHz. An example for a 7th harmonic multiplier is described, using a 250 kV, 20 A injected laminar electron beam; with 10 MW of S-band drive power, 4.7 MW of 20-GHz output power is predicted. Details are described of the magnetic circuit, cavities, and output coupler.

Terahertz Schottky Multiplier Sources

NASA Technical Reports Server (NTRS)

Schlecht, Erich T.

2007-01-01

This viewgraph presentation reviews the multiplier source technologies and the status/Performance of THz multiplier sources. An example of a THz application is imaging radar. The presentation reviews areas of requirements for THz sources: (1) Figures of merit, (i.e., Frequency Terahertz for high resolution Bandwidth of at least 15 GHz for high range resolution Efficiency (i.e., minimize power supply requirements) (2) Output power: (i.e., Milliwatts below 800 GHz, 10s of microwatts above 1 THz, 1-2 microwatts near 2 THz (3) Mechanical--stability, compact, low mass (4) Environmental -- radiation, vibration, thermal. Several sources for 0.3 - 2 THz are reviewed: FIR lasers, quantum cascade lasers (QCL), backward-wave oscillator (BWO), and Multiplier sources. The current state of the art (SoA) is shown as Substrateless Technology. It also shows where the SoA is for devices beyond 1 THz. The presentation concludes by reviewing the options for future development, and 2 technology roadmaps

Ellipticity-dependent of multiple ionisation methyl iodide cluster using 532 nm nanosecond laser

NASA Astrophysics Data System (ADS)

Tang, Bin; Zhao, Wuduo; Wang, Weiguo; Hua, Lei; Chen, Ping; Hou, Keyong; Huang, Yunguang; Li, Haiyang

2016-03-01

The dependence of multiply charged ions on laser ellipticity in methyl iodide clusters with 532 nm nanosecond laser was measured using a time-of-flight mass spectrometer. The intensities of multiply charged ions Iq+(q = 2-4) with circularly polarised laser pulse were clearly higher than those with linearly polarised laser pulse but the intensity of single charged ions I+ was inverse. And the dependences of ions on the optical polarisation state were investigated and a flower petal and square distribution for single charged ions (I+, C+) and multiply charged ions (I2+, I3+, I4+, C2+) were observed, respectively. A theoretical calculation was also proposed to simulate the distributions of ions and theoretical results fitted well with the experimental ones. It indicated that the high multiphoton ionisation probability in the initial stage would result in the disintegration of big clusters into small ones and suppress the production of multiply charged ions.

EUV emission spectra in collisions of highly charged tantalum ions with nitrogen and oxygen molecules

NASA Astrophysics Data System (ADS)

Tanuma, Hajime; Numadate, Naoki; Uchikura, Yoshiyuki; Shimada, Kento; Akutsu, Takuto; Long, Elaine; O'Sullivan, Gerry

2017-10-01

We have performed ion beam collision experiments using multiply charged tantalum ions and observed EUV (extreme ultra-violet) emission spectra in collisions of ions with molecular targets, N2 and O2. Broad UTAs (un-resolved transition arrays) from multiply charged Ta ions were observed, and the mean wavelengths of the UTAs shifted and became shorter at higher charge statea of Ta ions. These UTAs may be attributed to the 4f-5d and 4f-5g transitions. Not only the UTA emission from incident ions, but also the sharp emission lines from multiply charged fragment atomic ions were observed. Production of temporary highly charged molecular ions, their kinetic energy and fragmentation processes have been investigated with coincident detection technique. However, the observation of emission from the fragments might be for the first time. The formation mechanisms of the multiply charged fragment atomic ions from target molecules are discussed.

Genesis Noble Gas Measurements

NASA Technical Reports Server (NTRS)

Hohenberg, Charles M.

2005-01-01

The original thrust of our Genesis funding was to extend and refine the noble gas analytical capabilities of this laboratory to improve the precision and accuracy of noble gas measurements in order to optimize the scientific return from the Genesis Mission. This process involved both instrumental improvement (supplemented by a SRLIDAP instrument grant) and refinement of technique. The Genesis landing mishap shifted our emphasis to the irregular aluminum heat shield material from the flat collector wafers. This has required redesign of our laser extraction cells to accommodate the longer focal lengths required for laser extraction from non-flat surfaces. Extraction of noble gases from solid aluminum surfaces, rather than thin coatings on transparent substrates has required refinement of controlled-depth laser ablation techniques. Both of these bring new problems, both with potentially higher blanks form larger laser cells and the larger quantities of evaporated aluminum which can coat the sapphire entrance ports. This is mainly a problem for the heavy noble gases where larger extraction areas are required, necessitating the new aluminum vapor containment techniques described below. With the Genesis Mission came three new multiple multiplier noble gas mass spectrometers to this laboratory, one built solely by us (Supergnome-M), one built in collaboration with Nu-Instruments (Noblesse), and one built in collaboration with GVI (Helix). All of these have multiple multiplier detection sections with the Nu-Instruments using a pair of electrostatic quad lenses for isotope spacing and the other two using mechanically adjustable positions for the electron multipliers. The Supergnome-M and Noblesse are installed and running. The GVI instrument was delivered a year late (in March 2005) and is yet to be installed by GVI. As with all new instruments there were some initial development issues, some of which are still outstanding. The most serious of these are performance issues with the miniature channel electron multipliers. The delayed installation of Helix by the GVI is partly due to failure of the initial batch of Burle channel multipliers to perform as expected. A number of the channel multipliers designed for Noblesse by Burle have also failed upon baking. Burle has now refined the design of these and we have installed two of the new multipliers and are assessing their performance. The remaining multipliers Will be upgraded to the new design from Burle once we confirm that the problem has been fixed.

Dynamic Polymorphic Reconfiguration to Effectively Cloak a Circuit’s Function

DTIC Science & Technology

2011-03-24

86 B . RSA Traces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 2.1...56 22 SEMA of Separate Square and Multiply Trace with key (E B5) - RSA Version B ...56 23 Separate Square and Multiply Trace after signal processing - RSA Version B

A Novel Split-Waveguide Mount Design For MM and SubMM wave frequency multipliers and Harmonic Mixers

NASA Technical Reports Server (NTRS)

Raisanen, Anti V.; Choudhury, Debabani; Dengler, Robert J.; Oswald, John E.; Siegel, Peter H.

1993-01-01

A novel split-waveguide mount for millimeter and submillimeter wave frequency multipliers and harmonic mixers is presented. It consists of only two pieces, block halves, which are mirror images of each other.

MULTIPLIER CIRCUIT

DOEpatents

Thomas, R.E.

1959-01-20

An electronic circuit is presented for automatically computing the product of two selected variables by multiplying the voltage pulses proportional to the variables. The multiplier circuit has a plurality of parallel resistors of predetermined values connected through separate gate circults between a first input and the output terminal. One voltage pulse is applied to thc flrst input while the second voltage pulse is applied to control circuitry for the respective gate circuits. Thc magnitude of the second voltage pulse selects the resistors upon which the first voltage pulse is imprcssed, whereby the resultant output voltage is proportional to the product of the input voltage pulses

Evaluation of observed blast loading effects on NIF x-ray diagnostic collimators.

PubMed

Masters, N D; Fisher, A; Kalantar, D; Prasad, R; Stölken, J S; Wlodarczyk, C

2014-11-01

We present the "debris wind" models used to estimate the impulsive load to which x-ray diagnostics and other structures are subject during National Ignition Facility experiments. These models are used as part of the engineering design process. Isotropic models, based on simulations or simplified "expanding shell" models, are augmented by debris wind multipliers to account for directional anisotropy. We present improvements to these multipliers based on measurements of the permanent deflections of diagnostic components: 4× for the polar direction and 2× within the equatorial plane-the latter relaxing the previous heuristic debris wind multiplier.

Multiplier method may be unreliable to predict the timing of temporary hemiepiphysiodesis for coronal angular deformity.

PubMed

Wu, Zhenkai; Ding, Jing; Zhao, Dahang; Zhao, Li; Li, Hai; Liu, Jianlin

2017-07-10

The multiplier method was introduced by Paley to calculate the timing for temporary hemiepiphysiodesis. However, this method has not been verified in terms of clinical outcome measure. We aimed to (1) predict the rate of angular correction per year (ACPY) at the various corresponding ages by means of multiplier method and verify the reliability based on the data from the published studies and (2) screen out risk factors for deviation of prediction. A comprehensive search was performed in the following electronic databases: Cochrane, PubMed, and EMBASE™. A total of 22 studies met the inclusion criteria. If the actual value of ACPY from the collected date was located out of the range of the predicted value based on the multiplier method, it was considered as the deviation of prediction (DOP). The associations of patient characteristics with DOP were assessed with the use of univariate logistic regression. Only one article was evaluated as moderate evidence; the remaining articles were evaluated as poor quality. The rate of DOP was 31.82%. In the detailed individual data of included studies, the rate of DOP was 55.44%. The multiplier method is not reliable in predicting the timing for temporary hemiepiphysiodesis, even though it is prone to be more reliable for the younger patients with idiopathic genu coronal deformity.

Low-voltage harmonic multiplying gyrotron traveling-wave amplifier in G band

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeh, Y. S.; Guo, Y. W.; Kao, B. H.

Harmonic multiplying operation in a gyrotron traveling-wave amplifier (gyro-TWA) permits for magnetic field reduction and frequency multiplication. Lowering a beam voltage is an important step toward miniaturization of a harmonic multiplying gyro-TWA. However, the additional degree of freedom that is provided by the multitude cyclotron harmonics in a low-voltage harmonic multiplying gyro-TWA still easily generates various competing modes. An improved mode-selective circuit, using circular waveguides with various radii, can provide the rejection points within the frequency range to suppress competing modes. Simulated results reveal that the mode-selective circuit can provide an attenuation of more than 14 dB to suppress the competingmore » modes. Furthermore, the performance of the gyro-TWA is analyzed for studying the sensitivity of the saturated output power and full width at half maximum bandwidth of the gyro-TWA to the beam voltage and the magnetic field. A stable low-voltage harmonic multiplying gyro-TWA with the mode-selective circuit is predicted to yield a peak output power of 24 kW at 200.4 GHz, corresponding to a saturated gain of 56 dB at an interaction efficiency of 20%. The full width at half maximum bandwidth is 3.0 GHz.« less

5 CFR 842.405 - Air traffic controllers, firefighters, law enforcement officers, and nuclear materials couriers.

Code of Federal Regulations, 2011 CFR

2011-01-01

...— (a) One and seven-tenths percent of average pay multiplied by 20 years; plus (b) One percent of average pay multiplied by the years of service exceeding 20 years. [52 FR 4475, Feb. 11, 1987, as amended...

5 CFR 842.405 - Air traffic controllers, firefighters, law enforcement officers, and nuclear materials couriers.

Code of Federal Regulations, 2010 CFR

2010-01-01

...— (a) One and seven-tenths percent of average pay multiplied by 20 years; plus (b) One percent of average pay multiplied by the years of service exceeding 20 years. [52 FR 4475, Feb. 11, 1987, as amended...

A Look at the Child.

ERIC Educational Resources Information Center

Association for Education of the Visually Handicapped, Philadelphia, PA.

Presented are 26 papers and four Association reports given at the 1970 national conference. Among the papers are the following titles: "Educating the Multihandicapped Blind Child", "Regional Centers for Deaf-Blind Children--A New Hope", "The Multiply Impaired Visually Handicapped in the Residential School", "The Multiply-Impaired…

Making Choices in Functional Vision Evaluations: "Noodles, Needles, and Haystacks."

ERIC Educational Resources Information Center

Bishop, V. E.

1988-01-01

An approach to functional vision evaluations clarifies the types of data collection and suggests protocols for three broad categories of visually handicapped children: "normal" school-age students, "normal" preschoolers, and multiply handicapped pupils. Visually impaired infants are classified with multiply handicapped pupils…

The Multiply Handicapped Child.

ERIC Educational Resources Information Center

Wolf, James M., Ed.; Anderson, Robert M., Ed.

Articles presented in the area of the medical and educational challenge of the multiply handicapped child are an overview of the problem, the increasing challenge, congenital malformations, children whose mothers had rubella, prematurity and deafness, the epidemiology of reproductive casualty, and new education for old problems. Discussions of…

Teaching Multiply Controlled Intraverbals to Children and Adolescents with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Kisamore, April N.; Karsten, Amanda M.; Mann, Charlotte C.

2016-01-01

Reciprocal conversations, instructional activities, and other social interactions are replete with multiply controlled intraverbals, examples of which have been conceptualized in terms of conditional discriminations. Although the acquisition of conditional discriminations has been examined extensively in the behavior-analytic literature, little…

Development of prolonged standing strain index to quantify risk levels of standing jobs.

PubMed

Halim, Isa; Omar, Abdul Rahman

2012-01-01

Many occupations in industry such as metal stamping workers, electronics parts assembly operators, automotive industry welders, and lathe operators require working in a standing posture for a long time. Prolonged standing can contribute to discomfort and muscle fatigue particularly in the back and legs. This study developed the prolonged standing strain index (PSSI) to quantify the risk levels caused by standing jobs, and proposed recommendations to minimize the risk levels. Risk factors associated with standing jobs, such as working posture, muscles activity, standing duration, holding time, whole-body vibration, and indoor air quality, were the basis for developing the PSSI. All risk factors were assigned multipliers, and the PSSI was the product of those multipliers. Recommendations for improvement are based on the PSSI; however, extensive studies are required to validate their effectiveness. multipliers, and the PSSI was the product of those multipliers. Recommendations for improvement are based on the PSSI; however, extensive studies are required to validate their effectiveness.

Lower-Order Compensation Chain Threshold-Reduction Technique for Multi-Stage Voltage Multipliers.

PubMed

Dell' Anna, Francesco; Dong, Tao; Li, Ping; Wen, Yumei; Azadmehr, Mehdi; Casu, Mario; Berg, Yngvar

2018-04-17

This paper presents a novel threshold-compensation technique for multi-stage voltage multipliers employed in low power applications such as passive and autonomous wireless sensing nodes (WSNs) powered by energy harvesters. The proposed threshold-reduction technique enables a topological design methodology which, through an optimum control of the trade-off among transistor conductivity and leakage losses, is aimed at maximizing the voltage conversion efficiency (VCE) for a given ac input signal and physical chip area occupation. The conducted simulations positively assert the validity of the proposed design methodology, emphasizing the exploitable design space yielded by the transistor connection scheme in the voltage multiplier chain. An experimental validation and comparison of threshold-compensation techniques was performed, adopting 2N5247 N-channel junction field effect transistors (JFETs) for the realization of the voltage multiplier prototypes. The attained measurements clearly support the effectiveness of the proposed threshold-reduction approach, which can significantly reduce the chip area occupation for a given target output performance and ac input signal.

A Framework for Including Family Health Spillovers in Economic Evaluation

PubMed Central

Al-Janabi, Hareth; van Exel, Job; Brouwer, Werner; Coast, Joanna

2016-01-01

Health care interventions may affect the health of patients’ family networks. It has been suggested that these “health spillovers” should be included in economic evaluation, but there is not a systematic method for doing this. In this article, we develop a framework for including health spillovers in economic evaluation. We focus on extra-welfarist economic evaluations where the objective is to maximize health benefits from a health care budget (the “health care perspective”). Our framework involves adapting the conventional cost-effectiveness decision rule to include 2 multiplier effects to internalize the spillover effects. These multiplier effects express the ratio of total health effects (for patients and their family networks) to patient health effects. One multiplier effect is specified for health benefit generated from providing a new intervention, one for health benefit displaced by funding this intervention. We show that using multiplier effects to internalize health spillovers could change the optimal funding decisions and generate additional health benefits to society. PMID:26377370

Multiply scaled constrained nonlinear equation solvers. [for nonlinear heat conduction problems

NASA Technical Reports Server (NTRS)

Padovan, Joe; Krishna, Lala

1986-01-01

To improve the numerical stability of nonlinear equation solvers, a partitioned multiply scaled constraint scheme is developed. This scheme enables hierarchical levels of control for nonlinear equation solvers. To complement the procedure, partitioned convergence checks are established along with self-adaptive partitioning schemes. Overall, such procedures greatly enhance the numerical stability of the original solvers. To demonstrate and motivate the development of the scheme, the problem of nonlinear heat conduction is considered. In this context the main emphasis is given to successive substitution-type schemes. To verify the improved numerical characteristics associated with partitioned multiply scaled solvers, results are presented for several benchmark examples.

High frequency capacitor-diode voltage multiplier dc-dc converter development

NASA Technical Reports Server (NTRS)

Kisch, J. J.; Martinelli, R. M.

1977-01-01

A power conditioner was developed which used a capacitor diode voltage multiplier to provide a high voltage without the use of a step-up transformer. The power conditioner delivered 1200 Vdc at 100 watts and was operated from a 120 Vdc line. The efficiency was in excess of 90 percent. The component weight was 197 grams. A modified boost-add circuit was used for the regulation. A short circuit protection circuit was used which turns off the drive circuit upon a fault condition, and recovers within 5 ms after removal of the short. High energy density polysulfone capacitors and high speed diodes were used in the multiplier circuit.

Design Considerations for Heavily-Doped Cryogenic Schottky Diode Varactor Multipliers

NASA Technical Reports Server (NTRS)

Schlecht, E.; Maiwald, F.; Chattopadhyay, G.; Martin, S.; Mehdi, I.

2001-01-01

Diode modeling for Schottky varactor frequency multipliers above 500 GHz is presented with special emphasis placed on simple models and fitted equations for rapid circuit design. Temperature- and doping-dependent mobility, resistivity, and avalanche current multiplication and breakdown are presented. Next is a discussion of static junction current, including the effects of tunneling as well as thermionic emission. These results have been compared to detailed measurements made down to 80 K on diodes fabricated at JPL, followed by a discussion of the effect on multiplier efficiency. Finally, a simple model of current saturation in the undepleted active layer suitable for inclusion in harmonic balance simulators is derived.

WIDE BAND REGENERATIVE FREQUENCY DIVIDER AND MULTIPLIER

DOEpatents

Laine, E.F.

1959-11-17

A regenerative frequency divider and multiplier having wide band input characteristics is presented. The circuit produces output oscillations having frequencies related by a fixed ratio to input oscillations over a wide band of frequencies. In accomplishing this end, the divider-multiplier includes a wide band input circuit coupled by mixer means to a wide band output circuit having a pass band related by a fixed ratio to that of the input circuit. A regenerative feedback circuit derives a fixed frequency ratio feedback signal from the output circuit and applies same to the mixer means in proper phase relation to sustain fixed frequency ratio oscillations in the output circuit.

Harmonic balance optimization of terahertz Schottky diode multipliers using an advanced device model

NASA Technical Reports Server (NTRS)

Schlecht, E. T.; Chattopadhyay, G.; Maestrini, A.; Pukala, D.; Gill, J.; Mehdi, I.

2002-01-01

Substantial proress has been made recently in the advancement of solid state terahertz sources using chains of Schottky diode frequency multipliers. We have developed a harmonic balance simulator and corresponding diode model that incorporates many other factors participating in the diode behavior.

Response, analysis, and design of pile groups subjected to static & dynamic lateral loads.

DOT National Transportation Integrated Search

2003-06-01

Static and dynamic lateral load tests were performed on four full-scale pile groups driven at four different spacings. P-multipliers to account for group : interaction effects were back-calculated for each test. P-multipliers were found to be a funct...

Training Pragmatic Language Skills through Alternate Strategies with a Blind Multiply Handicapped Child.

ERIC Educational Resources Information Center

Evans, C. J.; Johnson, C. J.

1988-01-01

A blind multiply handicapped preschooler was taught to respond appropriately to two adjacency pair types ("where question-answer" and "comment-acknowledgement"). The two alternative language acquisition strategies available to blind children were encouraged: echolalia to maintain communicative interactions and manual searching…

Representation of the inverse of a frame multiplier☆

PubMed Central

Balazs, P.; Stoeva, D.T.

2015-01-01

Certain mathematical objects appear in a lot of scientific disciplines, like physics, signal processing and, naturally, mathematics. In a general setting they can be described as frame multipliers, consisting of analysis, multiplication by a fixed sequence (called the symbol), and synthesis. In this paper we show a surprising result about the inverse of such operators, if any, as well as new results about a core concept of frame theory, dual frames. We show that for semi-normalized symbols, the inverse of any invertible frame multiplier can always be represented as a frame multiplier with the reciprocal symbol and dual frames of the given ones. Furthermore, one of those dual frames is uniquely determined and the other one can be arbitrarily chosen. We investigate sufficient conditions for the special case, when both dual frames can be chosen to be the canonical duals. In connection to the above, we show that the set of dual frames determines a frame uniquely. Furthermore, for a given frame, the union of all coefficients of its dual frames is dense in ℓ2. We also introduce a class of frames (called pseudo-coherent frames), which includes Gabor frames and coherent frames, and investigate invertible pseudo-coherent frame multipliers, allowing a classification for frame-type operators for these frames. Finally, we give a numerical example for the invertibility of multipliers in the Gabor case. PMID:25843976

Sensory Reinforcement: Effects of Response-Contingent Vestibular Stimulation on Multiply Handicapped Children.

ERIC Educational Resources Information Center

Sandler, Allen G.; McLain, Susan C.

1987-01-01

Investigation of the reinforcing properties of vestibular stimulation with five multiply disabled severely retarded young children indicated that vestibular stimulation (10 seconds of swinging) was reinforcing to all subjects and was preferred (over food, praise, visual, and auditory stimulation) by four of the five children. (Author/DB)

Practical Active Capacitor Filter

NASA Technical Reports Server (NTRS)

Shuler, Robert L., Jr. (Inventor)

2005-01-01

A method and apparatus is described that filters an electrical signal. The filtering uses a capacitor multiplier circuit where the capacitor multiplier circuit uses at least one amplifier circuit and at least one capacitor. A filtered electrical signal results from a direct connection from an output of the at least one amplifier circuit.

Multiplying Is More than Math--It's Also Good Management

ERIC Educational Resources Information Center

Foster, Elise; Wiseman, Liz

2015-01-01

Studying more than 400 educational leaders, the authors propose a new model for leadership and management rooted in the belief that there is latent intelligence inside schools and educational organizations. Their findings suggest two dramatically different types of leaders, Multipliers and Diminishers. The five disciplines that distinguish…

5 CFR 550.707 - Computation of severance pay fund.

Code of Federal Regulations, 2011 CFR

2011-01-01

... pay for standby duty regularly varies throughout the year, compute the average standby duty premium...), compute the weekly average percentage, and multiply that percentage by the weekly scheduled rate of pay in... hours in a pay status (excluding overtime hours) and multiply that average by the hourly rate of basic...

Familiar Sports and Activities Adapted for Multiply Impaired Persons.

ERIC Educational Resources Information Center

Schilling, Mary Lou, Ed.

1984-01-01

Means of adapting some familiar and popular physical activities for multiply impaired persons are described. Games reviewed are dice baseball, one base baseball, in-house bowling, wheelchair bowling, ramp bowling, swing-ball bowling, table tennis, shuffleboard, beanbag bingo and tic-tac-toe, balloon basketball, circle football, and wheelchair…

The Logan School Motor Development Program for the Deaf-Blind and Sensory Impaired.

ERIC Educational Resources Information Center

Logan, Thomas E.

Presented are numerous motor development activities for sensory impaired, severely and profoundly mentally retarded, and multiply handicapped mentally retarded students of all ages. Background information is provided on program objectives and administration, the multiply handicapped child, motor development, and methods of movement training.…

Assessing Motor Skills in Multiply Handicapped Children.

ERIC Educational Resources Information Center

DuBose, Rebecca F.

Examined are the effects of motor skill development and impairment on the infant's and young child's overall functioning, and suggested are guidelines for assessing motor skills in multiply handicapped children. It is explained that motor delays and deficits limit a child's learning during critical developmental periods. Examples of delayed motor…

12 CFR 615.5134 - Liquidity reserve requirement.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... Money market instruments, floating, and fixed rate debt securities used to fund the liquidity reserve... requirement of this section must be free of lien. (c) The liquid assets of the liquidity reserve are discounted as follows: (1) Multiply cash and overnight investments by 100 percent. (2) Multiply money market...

12 CFR 615.5134 - Liquidity reserve requirement.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... Money market instruments, floating, and fixed rate debt securities used to fund the liquidity reserve... requirement of this section must be free of lien. (c) The liquid assets of the liquidity reserve are discounted as follows: (1) Multiply cash and overnight investments by 100 percent. (2) Multiply money market...

12 CFR 615.5134 - Liquidity reserve requirement.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... Money market instruments, floating, and fixed rate debt securities used to fund the liquidity reserve... requirement of this section must be free of lien. (c) The liquid assets of the liquidity reserve are discounted as follows: (1) Multiply cash and overnight investments by 100 percent. (2) Multiply money market...

12 CFR 615.5134 - Liquidity reserve requirement.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... Money market instruments, floating, and fixed rate debt securities used to fund the liquidity reserve... requirement of this section must be free of lien. (c) The liquid assets of the liquidity reserve are discounted as follows: (1) Multiply cash and overnight investments by 100 percent. (2) Multiply money market...

Treatment of Multiply Controlled Problem Behavior with Procedural Variations of Differential Reinforcement

ERIC Educational Resources Information Center

Neidert, Pamela L.; Iwata, Brian A.; Dozier, Claudia L.

2005-01-01

We describe the assessment and treatment of 2 children with autism spectrum disorder whose problem behaviors (self-injury, aggression, and disruption) were multiply controlled. Results of functional analyses indicated that the children's problem behaviors were maintained by both positive reinforcement (attention) and negative reinforcement (escape…

An Interdisciplinary Microprocessor Project.

ERIC Educational Resources Information Center

Wilcox, Alan D.; And Others

1985-01-01

Describes an unusual project in which third-year computer science students designed and built a four-bit multiplier circuit and then combines it with software to complete a full 16-bit multiplication. The multiplier was built using TTL components, interfaced with a Z-80 microprocessor system, and programed in assembly language. (JN)

Postirradiation Effects In Integrated Circuits

NASA Technical Reports Server (NTRS)

Shaw, David C.; Barnes, Charles E.

1993-01-01

Two reports discuss postirradiation effects in integrated circuits. Presents examples of postirradiation measurements of performances of integrated circuits of five different types: dual complementary metal oxide/semiconductor (CMOS) flip-flop; CMOS analog multiplier; two CMOS multiplying digital-to-analog converters; electrically erasable programmable read-only memory; and semiconductor/oxide/semiconductor octal buffer driver.

24 CFR 990.110 - Operating fund formula.

Code of Federal Regulations, 2011 CFR

2011-04-01

...: Project Expense Level (PEL), Utility Expense Level (UEL), and other formula expenses (add-ons). Formula...) Certain portions of the operating fund formula (e.g., PEL) are calculated in terms of per unit per month... follows: {[(PEL multiplied by EUM) plus (UEL multiplied by EUM) plus add-ons] minus (formula income...

24 CFR 990.110 - Operating fund formula.

Code of Federal Regulations, 2010 CFR

2010-04-01

...: Project Expense Level (PEL), Utility Expense Level (UEL), and other formula expenses (add-ons). Formula...) Certain portions of the operating fund formula (e.g., PEL) are calculated in terms of per unit per month... follows: {[(PEL multiplied by EUM) plus (UEL multiplied by EUM) plus add-ons] minus (formula income...

A Classical Conditioning Procedure for the Hearing Assessment of Multiply Handicapped Persons.

ERIC Educational Resources Information Center

Lancioni, Giulio E.; And Others

1989-01-01

Hearing assessments of multiply handicapped children/adolescents were conducted using classical conditioning (with an air puff as unconditioned stimulus) and operant conditioning (with a modified visual reinforcement audiometry procedure or edible reinforcement). Findings indicate that classical conditioning was successful with 21 of the 23…

Maine | Midmarket Solar Policies in the United States | Solar Research |

Science.gov Websites

multiplier for qualifying community-based renewable energy projects. Maine has a 40% Renewable Portfolio Standard (RPS), with a 1.5 credit multiplier for qualifying community-based renewable energy projects ). Maine-based nonprofits, community action programs, quasi-municipal corporations, and school

Survival Words and Phrases for Professionals Who Work with Students Who Are Bilingual and Severely/Multiply Handicapped, and with Their Families.

ERIC Educational Resources Information Center

Silberman, Rosanne K.; Correa, Vivian I.

1989-01-01

The paper offers a rationale for bilingual special education, provides suggestions for developing bilingual lessons for severely/multiply handicapped students, and includes a list of Spanish words and phrases used most frequently by students and their parents. (JDD)

Obtaining Predictions from Models Fit to Multiply Imputed Data

ERIC Educational Resources Information Center

Miles, Andrew

2016-01-01

Obtaining predictions from regression models fit to multiply imputed data can be challenging because treatments of multiple imputation seldom give clear guidance on how predictions can be calculated, and because available software often does not have built-in routines for performing the necessary calculations. This research note reviews how…

Individualized Levels System and Systematic Stimulus Pairing to Reduce Multiply Controlled Aggression of a Child With Autism Spectrum Disorder.

PubMed

Randall, Kayla R; Lambert, Joseph M; Matthews, Mary P; Houchins-Juarez, Nealetta J

2018-05-01

Research has shown that physical aggression is common in individuals with autism spectrum disorder (ASD). Interventions for multiply controlled aggression may be complex and difficult to implement with fidelity. As a result, the probability of treatment efficacy for this class of behavior may suffer. We designed an individualized levels system to reduce the physical aggression of an 11-year-old female with ASD. We then employed a systematic stimulus pairing procedure to facilitate generalization. Results suggest individualized levels systems can suppress multiply controlled aggression and that systematic stimulus pairing is an effective way to transfer treatment effects from trained therapists to caregivers.

Technique to eliminate computational instability in multibody simulations employing the Lagrange multiplier

NASA Technical Reports Server (NTRS)

Watts, G.

1992-01-01

A programming technique to eliminate computational instability in multibody simulations that use the Lagrange multiplier is presented. The computational instability occurs when the attached bodies drift apart and violate the constraints. The programming technique uses the constraint equation, instead of integration, to determine the coordinates that are not independent. Although the equations of motion are unchanged, a complete derivation of the incorporation of the Lagrange multiplier into the equation of motion for two bodies is presented. A listing of a digital computer program which uses the programming technique to eliminate computational instability is also presented. The computer program simulates a solid rocket booster and parachute connected by a frictionless swivel.

Trainable Mentally Impaired/Severely Multiply Impaired/Autistic Impaired/Severely Mentally Impaired. Product Evaluation Report 1989-1990.

ERIC Educational Resources Information Center

Claus, Richard N.; And Others

The evaluation report describes special education services provided to trainable mentally impaired (TMI), autistic impaired (AI), severely multiply impaired (SXI), and severely mentally impaired (SMI) students at and through the Melvin G. Millet Learning Center (Bridgeport, Michigan). The eight program components are described individually and…

What Does the Impact Statement Say About Economic Impacts? Coping With Growth.

ERIC Educational Resources Information Center

Faas, Ronald C.

Local public officials may be confronted with the use of economic multipliers when asked to react to project proposals, to environmental impact statements, or to other studies containing economic impact analyses. Employment, income, and output multipliers are tools for estimating private sector economic impacts of a new development within a local…

Educational Resource Multipliers for Use in Local Public Finance: An Input-Output Approach.

ERIC Educational Resources Information Center

Boardman, A. E.; Schinnar, A. P.

1982-01-01

Develops an input-output model, with related multipliers, showing how changes in earmarked and discretionary educational funds (whether local, state, or federal) affect all of a state's districts and educational programs. Illustrates the model with Pennsylvania data and relates it to the usual educational finance approach, which uses demand…

BCRMD Program for Multiply Handicapped Pupils: Evaluation Report. School Year 1975-1976.

ERIC Educational Resources Information Center

Echternacht, Gary

Presented is an evaluation of a program which provided supplementary pre-reading and mathematics instruction to multiply handicapped children (physically and mentally handicapped) in six elementary and two intermediate schools. It is explained that students were individually instructed on objectives which they failed on the McGraw Hill Test of…

Fatal infection caused by a multiply resistant type 3 pneumococcus.

PubMed Central

Lawrenson, J B; Klugman, K P; Eidelman, J I; Wasas, A; Miller, S D; Lipman, J

1988-01-01

The most virulent pneumococcal serotype (type 3) has not to date been associated with multiple antimicrobial resistance. We report an unusual gastrointestinal presentation of fatal septicemia caused by a multiply resistant type 3 pneumococcus in a setting of increasing prevalence of multiple resistance, including resistance to erythromycin, clindamycin, and tetracycline. PMID:3170717

7 CFR 760.5 - Fair market value of milk.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the case of an affected farmer who markets his whole milk through a milk handler, by multiplying the... whole milk paid during the pay period by such farmer's milk handler in the same area for whole milk... of direct retail sales to consumers, by multiplying the affected farmer's normal marketings for each...

7 CFR 760.5 - Fair market value of milk.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the case of an affected farmer who markets his whole milk through a milk handler, by multiplying the... whole milk paid during the pay period by such farmer's milk handler in the same area for whole milk... of direct retail sales to consumers, by multiplying the affected farmer's normal marketings for each...

7 CFR 760.5 - Fair market value of milk.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the case of an affected farmer who markets his whole milk through a milk handler, by multiplying the... whole milk paid during the pay period by such farmer's milk handler in the same area for whole milk... of direct retail sales to consumers, by multiplying the affected farmer's normal marketings for each...

7 CFR 760.5 - Fair market value of milk.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the case of an affected farmer who markets his whole milk through a milk handler, by multiplying the... whole milk paid during the pay period by such farmer's milk handler in the same area for whole milk... of direct retail sales to consumers, by multiplying the affected farmer's normal marketings for each...

Facilitating Small-Scale Implementation of Inquiry-Based Teaching: Encounters and Experiences of Experimento Multipliers in One South African Province

ERIC Educational Resources Information Center

Dudu, Washington Takawira

2017-01-01

This paper explores the experiences of 37 physical science high school teachers who participated in a professional development (PD) programme coordinated by three Experimento multipliers. The Experimento programme is a Siemens Stiftung international educational programme aimed at providing didactic and methodological approaches to classroom…

Cooking Skills Instruction with Severely Multiply Handicapped Adolescents.

ERIC Educational Resources Information Center

Horsfall, Debbie; Maggs, Alex

1986-01-01

Examination of the acquisition, maintenance, and generalization of three cooking skills by three multiply and severely handicapped blind adolescents revealed that a "whole task" approach was successful in teaching the subjects to boil an egg, grill cheese, and cook a TV dinner. These skills also generalized to other cooking products. (Author/CB)

5 CFR 842.406 - Members of Congress and Congressional employees.

Code of Federal Regulations, 2011 CFR

2011-01-01

... is— (a) One and seven-tenths percent of average pay multiplied by the total number of years of service as a Member and/or congressional employee not exceeding 20 years: plus (b) One percent of average pay multiplied by the years of service other than that of a Member and/or congressional employee. ...

5 CFR 842.406 - Members of Congress and Congressional employees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... is— (a) One and seven-tenths percent of average pay multiplied by the total number of years of service as a Member and/or congressional employee not exceeding 20 years: plus (b) One percent of average pay multiplied by the years of service other than that of a Member and/or congressional employee. ...

Electron multiplier-ion detector system

DOEpatents

Dietz, L.A.

1975-08-01

This patent relates to an improved ion detector for use in mass spectrometers for pulse counting signal ions which may have a positive or a negative charge. The invention combines a novel electron multiplier with a scintillator type of ion detector. It is a high vacuum, high voltage device intended for use in ion microprobe mass spectrometers. (auth)

34 CFR 682.305 - Procedures for payment of interest benefits and special allowance and collection of origination...

Code of Federal Regulations, 2010 CFR

2010-07-01

... to the lender. The penalty interest is computed by— (i) Multiplying the daily interest rate... due on those loans for each interest rate; (ii) Multiplying the daily special allowance rate... loans for each interest rate and special allowance category; (iii) Adding the results of paragraphs (b...

Effective CPD on a Large Scale: Examining the Development of Multipliers

ERIC Educational Resources Information Center

Roesken-Winter, Bettina; Schüler, Sven; Stahnke, Rebekka; Blömeke, Sigrid

2015-01-01

Much research has been conducted on exploring teacher learning and constituting Continuous Professional Development (CPD) designs for teachers. Yet, little is known about appropriate design principles of CPD for teacher trainers/multipliers who in turn are supposed to provide CPD for teachers. The German Center for Mathematics Teacher Education…

29 CFR 4206.5 - Amount of credit in plans using the modified presumptive method.

Code of Federal Regulations, 2010 CFR

2010-07-01

... section, multiplied by the fractions described or determined under paragraph (c) of this section. When an... multiplied by the two fractions described in this paragraph in order to determine the amount of old liabilities that was previously assessed against the employer. (1) The first fraction is the fraction...

29 CFR 4206.4 - Amount of credit in plans using the presumptive method.

Code of Federal Regulations, 2010 CFR

2010-07-01

... section, multiplied by the fractions described or determined under paragraph (c) of this section. When an... paragraph (b) are multiplied by the two fractions described in this paragraph in order to determine the amount of the old liabilities that was previously assessed against the employer. (1) The first fraction...

Dividing Fractions and Problem Solving

ERIC Educational Resources Information Center

Cramer, Kathleen; Monson, Debra; Whitney, Stephanie; Leavitt, Seth; Wyberg, Terry

2010-01-01

Fraction division is generally introduced in sixth or seventh grade with this rule: "Invert and multiply." The authors examined current commercial curricula and found that few textbooks use context as a way to build meaning for the division of fractions. When context is used, the connection between the invert-and-multiply rule and the context is…

Treatment of multiply controlled destructive behavior with food reinforcement.

PubMed

Adelinis, J D; Piazza, C C; Goh, H L

2001-01-01

We evaluated the extent to which the positive reinforcement of communication would reduce multiply controlled destructive behavior in the absence of relevant extinction components. When edible reinforcement for appropriate communication and nonfood reinforcers for problem behavior were available simultaneously, responding was allocated almost exclusively toward the behavior that produced edible reinforcement.

Highly enriched multiply-labeled stable isotopic compounds as atmospheric tracers

DOEpatents

Goldblatt, M.; McInteer, B.B.

1974-01-29

Compounds multiply-labeled with stable isotopes and highly enriched in these isotopes are readily capable of detection in tracer experiments involving high dilutions. Thus, for example, /sup 13/C/sup 18/O/sub 2/ provides a useful tracer for following atmospheric pol lution produced as a result of fossil fuel burning. (Official Gazette)

Multiply-Constrained Semantic Search in the Remote Associates Test

ERIC Educational Resources Information Center

Smith, Kevin A.; Huber, David E.; Vul, Edward

2013-01-01

Many important problems require consideration of multiple constraints, such as choosing a job based on salary, location, and responsibilities. We used the Remote Associates Test to study how people solve such multiply-constrained problems by asking participants to make guesses as they came to mind. We evaluated how people generated these guesses…

Design and construction of a 2D metal organic framework with multiple cavities: a nonregular net with a paracyclophane that codes for multiply fused nodes.

PubMed

Papaefstathiou, Giannis S; Friscić, Tomislav; MacGillivray, Leonard R

2005-10-19

A metal organic framework with two different nodes (circle and square) and a structure related to one of the 20 known 2-uniform nets has been constructed using an organic building unit that codes for multiply fused nodes.

Another Trypanosoma, distinct from T. cruzi, multiplies in the lumen of the anal glands of the opossum Didelphis marsupialis.

PubMed

Deane, M P; Jansen, A M

1986-01-01

Epimastigotes were found multiplying in the anal glands and in hemocultures of an opossum; rare metacyclics were seen in the cultures. The flagellate is possibly T. (Megatrypanum) freitasi Rego, Magalhães & Siqueira, 1957, but its final identification is still pending.

Responses from the Field

ERIC Educational Resources Information Center

McGrath, Richard J.; Tulchinsky, Nan

2007-01-01

This paper presents responses from Richard J. McGrath, O.S.A., and Nan Tulchinsky to an article by John James entitled "How Much Does a Private School Student Count? A Critical Analysis of the Athletic Multiplier." McGrath shares that their principal heads the group of Catholic school leaders who fought the multiplier in Illinois by…

18 CFR 381.104 - Annual adjustment of fees.

Code of Federal Regulations, 2012 CFR

2012-04-01

... data are available multiplied by the average monthly employee cost in the most recent fiscal year for... multiplied by the average monthly employee cost in the most recent fiscal year for which data are available... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Annual adjustment of...

18 CFR 381.104 - Annual adjustment of fees.

Code of Federal Regulations, 2013 CFR

2013-04-01

... data are available multiplied by the average monthly employee cost in the most recent fiscal year for... multiplied by the average monthly employee cost in the most recent fiscal year for which data are available... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Annual adjustment of...

18 CFR 381.104 - Annual adjustment of fees.

Code of Federal Regulations, 2014 CFR

2014-04-01

... data are available multiplied by the average monthly employee cost in the most recent fiscal year for... multiplied by the average monthly employee cost in the most recent fiscal year for which data are available... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Annual adjustment of...

18 CFR 381.104 - Annual adjustment of fees.

Code of Federal Regulations, 2010 CFR

2010-04-01

... data are available multiplied by the average monthly employee cost in the most recent fiscal year for... multiplied by the average monthly employee cost in the most recent fiscal year for which data are available... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Annual adjustment of...

18 CFR 381.104 - Annual adjustment of fees.

Code of Federal Regulations, 2011 CFR

2011-04-01

... data are available multiplied by the average monthly employee cost in the most recent fiscal year for... multiplied by the average monthly employee cost in the most recent fiscal year for which data are available... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Annual adjustment of...

7 CFR 1001.71 - Payments to the producer-settlement fund.

Code of Federal Regulations, 2014 CFR

2014-01-01

... to the handler for the month as determined pursuant to § 1001.60. (b) The sum of: (1) An amount... multiplying the total pounds of protein, other solids, and butterfat contained in producer milk by the protein, other solids, and butterfat prices respectively; and (3) An amount obtained by multiplying the pounds of...

7 CFR 1001.71 - Payments to the producer-settlement fund.

Code of Federal Regulations, 2010 CFR

2010-01-01

... to the handler for the month as determined pursuant to § 1001.60. (b) The sum of: (1) An amount... multiplying the total pounds of protein, other solids, and butterfat contained in producer milk by the protein, other solids, and butterfat prices respectively; and (3) An amount obtained by multiplying the pounds of...

7 CFR 1001.71 - Payments to the producer-settlement fund.

Code of Federal Regulations, 2012 CFR

2012-01-01

... to the handler for the month as determined pursuant to § 1001.60. (b) The sum of: (1) An amount... multiplying the total pounds of protein, other solids, and butterfat contained in producer milk by the protein, other solids, and butterfat prices respectively; and (3) An amount obtained by multiplying the pounds of...

7 CFR 1001.71 - Payments to the producer-settlement fund.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to the handler for the month as determined pursuant to § 1001.60. (b) The sum of: (1) An amount... multiplying the total pounds of protein, other solids, and butterfat contained in producer milk by the protein, other solids, and butterfat prices respectively; and (3) An amount obtained by multiplying the pounds of...

7 CFR 1001.71 - Payments to the producer-settlement fund.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to the handler for the month as determined pursuant to § 1001.60. (b) The sum of: (1) An amount... multiplying the total pounds of protein, other solids, and butterfat contained in producer milk by the protein, other solids, and butterfat prices respectively; and (3) An amount obtained by multiplying the pounds of...

Videocourses for Training Staff in Developing Countries: An Example with Severely Retarded and Multiply Handicapped Children.

ERIC Educational Resources Information Center

McConkey, Roy; Templer, Sally

1987-01-01

The paper describes the development, content, and evaluation of an indigeniously produced video training package in the developing country of Zimbabwe which is designed for local personnel (nurses, nurses' aides, trainee nurses, and teachers) working with severely retarded and multiply handicapped children and young adults. (DB)

Psychological problems, protective factors and health-related quality of life in youth affected by violence: the burden of the multiply victimised.

PubMed

Schlack, Robert; Ravens-Sieberer, Ulrike; Petermann, Franz

2013-06-01

This study investigates self-rated mental health in terms of psychological problems, protective factors and health-related quality of life (HRQOL) in a nationally representative sample of adolescents (n=6813) aged 11-17 involved in violence with varying frequency. Using MANCOVA and ANCOVA, youth with single and multiple histories of violent victimisation and violence perpetration were contrasted with non-involved comparisons. The results show that even low levels of violence involvement were associated with more problems, fewer protective factors and impaired HRQOL. Multiply victimised youth - not perpetrating victims - stood out with internalising, peer and hyperactivity/inattention problems. Discriminant function analysis separated non-involved from violence-affected youth, and multiply victimised from not multiply victimised youth. Externalising behaviours, family issues, male sex and school functioning predicted group separation on the first function (proportion variance explained 80.0%), while internalising and peer issues were predictive for the second function (PVE 14.2%). Implications for prevention, intervention and research are discussed. Copyright © 2013 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Design space exploration of high throughput finite field multipliers for channel coding on Xilinx FPGAs

NASA Astrophysics Data System (ADS)

de Schryver, C.; Weithoffer, S.; Wasenmüller, U.; Wehn, N.

2012-09-01

Channel coding is a standard technique in all wireless communication systems. In addition to the typically employed methods like convolutional coding, turbo coding or low density parity check (LDPC) coding, algebraic codes are used in many cases. For example, outer BCH coding is applied in the DVB-S2 standard for satellite TV broadcasting. A key operation for BCH and the related Reed-Solomon codes are multiplications in finite fields (Galois Fields), where extension fields of prime fields are used. A lot of architectures for multiplications in finite fields have been published over the last decades. This paper examines four different multiplier architectures in detail that offer the potential for very high throughputs. We investigate the implementation performance of these multipliers on FPGA technology in the context of channel coding. We study the efficiency of the multipliers with respect to area, frequency and throughput, as well as configurability and scalability. The implementation data of the fully verified circuits are provided for a Xilinx Virtex-4 device after place and route.

On the origin of multiply-impulsive emission from solar flares. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Karpen, J. T.

1980-01-01

A set of solar hard X-ray bursts observed with the hard X-ray burst spectrometer on board the OSO-5 satellite was analyzed. The multiply-impulsive two stage events were selected on the basis of both morphological characteristics and association with appropriate phenomena at other wavelengths. Coincident radio, soft X-ray, H-alpha interplanetary particle, and magnetographic data were obtained from several observatories, to aid in developing a comprehensive picture of the physical processes underlying these complex bursts. Two classes of multiply impulsive bursts were identified: events whose components spikes apparently originate in one location, and events in which groups of spikes appear to come from separate regions which flare sequentially. The origin of multiplicity in the case of a single source region remains unidentified. Purely impulsive emissions show no sign of betatron acceleration, thus eliminating this mechanisn as a candidate for inducing multiply spiked structure. The majority of the two stage bursts, however, exhibited spectral behavior consistent with the betatron model, for the first few minutes of the second stage. Betatron acceleration thus has been identified as a common second stage phenomenon.

A stochastic model for photon noise induced by charged particles in multiplier phototubes of the space telescope fine guidance sensors

NASA Technical Reports Server (NTRS)

Howell, L. W.; Kennel, H. F.

1984-01-01

The Space Telescope (ST) is subjected to charged particle strikes in its space environment. ST's onboard fine guidance sensors utilize multiplier phototubes (PMT) for attitude determination. These tubes, when subjected to charged particle strikes, generate spurious photons in the form of Cerenkov radiation and fluorescence which give rise to unwanted disturbances in the pointing of the telescope. A stochastic model for the number of these spurious photons which strike the photocathode of the multiplier phototube which in turn produce the unwanted photon noise are presented. The model is applicable to both galactic cosmic rays and charged particles trapped in the Earth's radiation belts. The model which was programmed allows for easy adaption to a wide range of particles and different parameters for the phototube of the multiplier. The probability density functions for photons noise caused by protons, alpha particles, and carbon nuclei were using thousands of simulated strikes. These distributions are used as part of an overall ST dynamics simulation. The sensitivity of the density function to changes in the window parameters was also investigated.

Stochastic model for photon noise induced by charged particles in multiplier phototubes of the Hubble Space Telescope fine guidance sensors

NASA Technical Reports Server (NTRS)

Howell, L. W.; Kennel, H. F.

1986-01-01

The Space Telescope (ST) is subjected to charged particle strikes in its space environment. ST's onboard fine guidance sensors utilize multiplier phototubes (PMT) for attitude determination. These tubes, when subjected to charged particle strikes, generate spurious photons in the form of Cerenkov radiation and fluorescence which give rise to unwanted disturbances in the pointing of the telescope. A stochastic model for the number of these spurious photons which strike the photocathodes of the multiplier phototube which in turn produce the unwanted photon noise are presented. The model is applicable to both galactic cosmic rays and charged particles trapped in the earth's radiation belts. The model which was programmed allows for easy adaption to a wide range of particles and different parameters for the phototube of the multiplier. The probability density functions for photons noise caused by protons, alpha particles, and carbon nuclei were using thousands of simulated strikes. These distributions are used as part of an overall ST dynamics simulation. The sensitivity of the density function to changes in the window parameters was also investigated.

A Numerical Scheme for the Solution of the Space Charge Problem on a Multiply Connected Region

NASA Astrophysics Data System (ADS)

Budd, C. J.; Wheeler, A. A.

1991-11-01

In this paper we extend the work of Budd and Wheeler ( Proc. R. Soc. London A, 417, 389, 1988) , who described a new numerical scheme for the solution of the space charge equation on a simple connected domain, to multiply connected regions. The space charge equation, ▿ · ( Δ overlineϕ ▽ overlineϕ) = 0 , is a third-order nonlinear partial differential equation for the electric potential overlineϕ which models the electric field in the vicinity of a coronating conductor. Budd and Wheeler described a new way of analysing this equation by constructing an orthogonal coordinate system ( overlineϕ, overlineψ) and recasting the equation in terms of x, y, and ▽ overlineϕ as functions of ( overlineϕ, overlineψ). This transformation is singular on multiply connected regions and in this paper we show how this may be overcome to provide an efficient numerical scheme for the solution of the space charge equation. This scheme also provides a new method for the solution of Laplaces equation and the calculation of orthogonal meshes on multiply connected regions.

A Lagrange multiplier and Hopfield-type barrier function method for the traveling salesman problem.

PubMed

Dang, Chuangyin; Xu, Lei

2002-02-01

A Lagrange multiplier and Hopfield-type barrier function method is proposed for approximating a solution of the traveling salesman problem. The method is derived from applications of Lagrange multipliers and a Hopfield-type barrier function and attempts to produce a solution of high quality by generating a minimum point of a barrier problem for a sequence of descending values of the barrier parameter. For any given value of the barrier parameter, the method searches for a minimum point of the barrier problem in a feasible descent direction, which has a desired property that lower and upper bounds on variables are always satisfied automatically if the step length is a number between zero and one. At each iteration, the feasible descent direction is found by updating Lagrange multipliers with a globally convergent iterative procedure. For any given value of the barrier parameter, the method converges to a stationary point of the barrier problem without any condition on the objective function. Theoretical and numerical results show that the method seems more effective and efficient than the softassign algorithm.

Evaluation of multiplier effect of housing investments in the city economy

NASA Astrophysics Data System (ADS)

Ovsiannikova, T.; Rabtsevich, O.; Yugova, I.

2017-01-01

The given study presents evaluation of the role and significance of housing investments providing stable social and economic development of a city. It also justifies multiplier impact of investments in housing construction on all the sectors of urban economy. Growth of housing investments generates multiplier effect triggering the development of other different interrelated sectors. The paper suggests approach developed by the authors to evaluate the level of city development. It involves defining gross city product on the basis of integral criterion of gross value added of types of economic activities in the city economy. The algorithm of gross value added generation in urban economy is presented as a result of multiplier effect of housing investments. The evaluation of the mentioned effect was shown on the case of the city of Tomsk (Russia). The study has revealed that multiplier effect allows obtaining four rubles of added value out of one ruble of housing investments in the city economy. Methods used in the present study include the ones of the System of National Accounts, as well as methods of statistical and structural analysis. It has been proved that priority investment in housing construction is considered to be the key factor for stable social and economic development of the city. Developed approach is intended for justification of priority directions in municipal and regional investment policy. City and regional governing bodies and potential investors are the ones to apply the given approach.

Group 1 Type: Unmanned Aerial Systems (UAS) as a Force Multiplier to the Fire Support Team

DTIC Science & Technology

2011-03-03

2 History ........ : ............................................................. : ...................... 4 The...observer team will effectively put rounds on target with fewer adjustments and better accuracy for first round fire for effect in situations where the...Vision and Strategy 2025 publication,3 We will pursue developments with unmanned aircraft systems (UASs) to widen the force size multiplying

The energy spectrum of a microchannel multiplier with two microchannel plates in the chevron assembly

NASA Astrophysics Data System (ADS)

Kosulya, A. V.; Verbitskii, V. G.

2017-11-01

A mathematical model of the response of a microchannel multiplier based on two microchannel plates in the chevron assembly has been considered. Analytical expressions relating the parameters of input and output signals have been obtained. The geometry of the chevron unit has been determined, and it has been optimized.

40 CFR 600.209-95 - Calculation of fuel economy values for labeling.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Multiply the city model type fuel economy calculated from the tests performed using gasoline or diesel test... (B) Multiply the city model type fuel economy calculated from the tests performed using alcohol or natural gas test fuel as determined in § 600.207 (b)(5)(ii) by 0.90, rounding the product to the nearest...

The Development of Programmed Instruction in Orientation and Mobility for Multiply Handicapped Blind Children.

ERIC Educational Resources Information Center

Wood, Thomas A.

Described are the development and field testing of programed instruction in orientation and mobility for 41 multiply handicapped blind students. Based on initial assessment on the Peabody Mobility Scale, it is explained that the students were prescribed individualized tasks in the areas of motor development, sensory skills, concept development and…

Multiply-Impaired Blind Children: A National Problem.

ERIC Educational Resources Information Center

Graham, Milton D.

In 1966, a national survey reported on 8,887 multiply impaired (MI) blind children. About 56% were boys; 85% had been blind since before age 3, and half were totally blind. The principal causes of blindness were retrolental fibroplasia and congenital cataracts. Almost 63% had two or more additional disabilities (86.8% of those under age 6), such…

Gilles de la Tourette Disease in Multiply Disabled Children.

ERIC Educational Resources Information Center

Kerbeshian, Jacob; And Others

1985-01-01

Giles de La Tourette disease (TD) is characterized by multiform changing vocal and motor tics with a wide range of accompanying behavioral symptoms. The range of tics and behavioral problems seen in TD is described along with a typcial case report in a multiply disabled child. Diagnostic criteria, and treatment recommendations are also given.…

30 CFR 90.204 - Approved sampling devices; maintenance and calibration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... pack multiplied by 1.25. The voltage for other than nickel cadmium cell batteries shall not be lower than the product of the number of cells in the battery pack multiplied by the manufacturer's nominal voltage per cell value; (2) Examination of all components of the cyclone to assure that they are clean and...

30 CFR 70.204 - Approved sampling devices; maintenance and calibration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... battery pack multiplied by the manufacturer's nominal voltage per cell value; (2) Examination of all... calibrated at the flowrate of 2.0 liters of air per minute, or at a different flowrate as prescribed by the... than the product of the number of cells in the battery pack multiplied by 1.25. The voltage for other...

39 CFR 3010.23 - Calculation of percentage change in rates.

Code of Federal Regulations, 2010 CFR

2010-07-01

... rate cell in the class is multiplied by the planned rate for the respective cell and the resulting products are summed. Then, the same set of rate cell volumes are multiplied by the corresponding current..., 2, ..., N) Ri,n = planned rate of rate cell i Ri,c = current rate of rate cell i Vi = volume of rate...

A Manual for Assessment and Training of Severely Multiply Handicapped Deaf-Blind Students.

ERIC Educational Resources Information Center

Burton, Rosemarie A.; And Others

Intended for teacher use, the manual provides for the assessment and training of severely multiply handicapped deaf-blind students with sections on self help, motor development, and sensory stimulation training. Included for each skill are an individual rating scale for periodic assessments, a task analysis, and an actual teaching procedure. Found…

78 FR 5538 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

... contracts, and qualifying volume of other proprietary products of 500,000 contracts (totaling 1,350,000... executed greater than (or equal to) 375,000 contracts of multiply-listed options volume but less than 1,500... contracts of multiply-listed options volume but less than 1,500,000 such contracts, the Clearing Trading...

40 CFR 96.87 - Change in regulatory status.

Code of Federal Regulations, 2010 CFR

2010-07-01

... period multiplied by the ratio of the number of days, in the control period, starting with the effective... § 96.42 for the control period multiplied by the ratio of the number of days, in the control period... allocated for the same or a prior control period as: (1) Any NOX allowances allocated to the NOX Budget unit...

12 CFR Appendix B to Part 3 - Risk-Based Capital Guidelines; Market Risk Adjustment

Code of Federal Regulations, 2012 CFR

2012-01-01

...-zero specific risk capital charge. (A) For covered debt positions that are derivatives, a bank must... (including derivatives) in identical debt issues or indices. (iii) A bank must multiply the absolute value of... multiply the absolute value of the current market value of each net long or short covered equity position...

46 CFR 309.204 - Proof of loss.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of consumable stores on board at the time the vessel was ready to sail, determined by multiplying the...) The average daily consumption cost times the number of days from the date the vessel was ready to sail... time the vessel was ready to sail, determined by multiplying the agreed cost for one man per day by the...

46 CFR 309.204 - Proof of loss.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of consumable stores on board at the time the vessel was ready to sail, determined by multiplying the...) The average daily consumption cost times the number of days from the date the vessel was ready to sail... time the vessel was ready to sail, determined by multiplying the agreed cost for one man per day by the...

Meyer Children's Rehabilitation Institute Teaching Program for Young Children. [Prescriptive Teaching Program for Multiply Handicapped Nursery School Children].

ERIC Educational Resources Information Center

LaCrosse, Edward; And Others

The prescriptive teaching program for multiply handicapped nursery school children is presented in three manuals: prescriptive teaching, integration of prescriptions into classroom activities; and equipment and materials. Given in the prescriptive teaching manual are directions for assessing a child's strengths and weaknesses in functioning on a…

46 CFR 108.441 - Piping and discharge rates for CO2 systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... in square centimeters is determined by multiplying the factor 0.0313 by the number of kilograms of CO2 required. (The nominal cylinder outlet area in square inches is determined by multiplying the... than 71 square millimeters (0.110 square inches). (e) A CO2 system must discharge at least 85 percent...

46 CFR 108.441 - Piping and discharge rates for CO2 systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... in square centimeters is determined by multiplying the factor 0.0313 by the number of kilograms of CO2 required. (The nominal cylinder outlet area in square inches is determined by multiplying the... than 71 square millimeters (0.110 square inches). (e) A CO2 system must discharge at least 85 percent...

46 CFR 108.441 - Piping and discharge rates for CO2 systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... in square centimeters is determined by multiplying the factor 0.0313 by the number of kilograms of CO2 required. (The nominal cylinder outlet area in square inches is determined by multiplying the... than 71 square millimeters (0.110 square inches). (e) A CO2 system must discharge at least 85 percent...

46 CFR 108.441 - Piping and discharge rates for CO2 systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... in square centimeters is determined by multiplying the factor 0.0313 by the number of kilograms of CO2 required. (The nominal cylinder outlet area in square inches is determined by multiplying the... than 71 square millimeters (0.110 square inches). (e) A CO2 system must discharge at least 85 percent...

46 CFR 108.441 - Piping and discharge rates for CO2 systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... in square centimeters is determined by multiplying the factor 0.0313 by the number of kilograms of CO2 required. (The nominal cylinder outlet area in square inches is determined by multiplying the... than 71 square millimeters (0.110 square inches). (e) A CO2 system must discharge at least 85 percent...

7 CFR 1124.71 - Payments to the producer-settlement fund.

Code of Federal Regulations, 2014 CFR

2014-01-01

... value of milk to the handler for the month as determined pursuant to § 1124.60. (b) The sum of: (1) An... multiplying the total pounds of protein, other solids, and butterfat contained in producer milk by the protein, other solids, and butterfat prices respectively; and (3) An amount obtained by multiplying the pounds of...

7 CFR 1124.71 - Payments to the producer-settlement fund.

Code of Federal Regulations, 2012 CFR

2012-01-01

... value of milk to the handler for the month as determined pursuant to § 1124.60. (b) The sum of: (1) An... multiplying the total pounds of protein, other solids, and butterfat contained in producer milk by the protein, other solids, and butterfat prices respectively; and (3) An amount obtained by multiplying the pounds of...

7 CFR 1124.71 - Payments to the producer-settlement fund.

Code of Federal Regulations, 2011 CFR

2011-01-01

... value of milk to the handler for the month as determined pursuant to § 1124.60. (b) The sum of: (1) An... multiplying the total pounds of protein, other solids, and butterfat contained in producer milk by the protein, other solids, and butterfat prices respectively; and (3) An amount obtained by multiplying the pounds of...

7 CFR 1124.71 - Payments to the producer-settlement fund.

Code of Federal Regulations, 2013 CFR

2013-01-01

... value of milk to the handler for the month as determined pursuant to § 1124.60. (b) The sum of: (1) An... multiplying the total pounds of protein, other solids, and butterfat contained in producer milk by the protein, other solids, and butterfat prices respectively; and (3) An amount obtained by multiplying the pounds of...

7 CFR 1124.71 - Payments to the producer-settlement fund.

Code of Federal Regulations, 2010 CFR

2010-01-01

... value of milk to the handler for the month as determined pursuant to § 1124.60. (b) The sum of: (1) An... multiplying the total pounds of protein, other solids, and butterfat contained in producer milk by the protein, other solids, and butterfat prices respectively; and (3) An amount obtained by multiplying the pounds of...

An Exploration of Social Media Use among Multiply Minoritized LGBTQ Youth

ERIC Educational Resources Information Center

Lucero, Alfie Leanna

2013-01-01

This study responds to a need for research in a fast-growing and significant area of study, that of exploring, understanding, and documenting the numerous ways that multiply marginalized LGBTQ youth between the ages of 14 and 17 use social media. The primary research question examined whether social media provide safe spaces for multiply…

Integrated optic vector-matrix multiplier

DOEpatents

Watts, Michael R [Albuquerque, NM

2011-09-27

A vector-matrix multiplier is disclosed which uses N different wavelengths of light that are modulated with amplitudes representing elements of an N.times.1 vector and combined to form an input wavelength-division multiplexed (WDM) light stream. The input WDM light stream is split into N streamlets from which each wavelength of the light is individually coupled out and modulated for a second time using an input signal representing elements of an M.times.N matrix, and is then coupled into an output waveguide for each streamlet to form an output WDM light stream which is detected to generate a product of the vector and matrix. The vector-matrix multiplier can be formed as an integrated optical circuit using either waveguide amplitude modulators or ring resonator amplitude modulators.

Wide-range lock-in amplifier

DOEpatents

McNeilly, D.R.

1984-01-01

A lock-in amplifier is provided which allows detection of a signal buried in noise without preprocessing of the input signal. An analog signal multiplier is used to obtain a dc output which is the product of the signal being detected and a high-purity sine wave signal. A reference signal of a known selectable frequency is applied to a sine-wave generator to generate the sine wave of the same frequency. The sine wave is applied to a multiplier through a phase shift arrangement to allow the detection of both amplitude of the detected signal and the phases relative to the reference signal. The multiplier output is filtered by a low-pass filter to eliminate unwanted frequency components from the output signal.

Wide-range lock-in amplifier

DOEpatents

McNeilly, David R.

1985-01-01

A lock-in amplifier is provided which allows detection of a signal buried in noise without preprocessing of the input signal. An analog signal multiplier is used to obtain a dc output which is the product of the signal being detected and a high-purity sine wave signal. A reference signal of a known selectable frequency is applied to a sine-wave generator to generate the sine wave of the same frequency. The sine wave is applied to a multiplier through a phase shift arrangement to allow the detection of both amplitude of the detected signal and the phases relative to the reference signal. The multiplier output is filtered by a low-pass filter to eliminate unwanted frequency components from the output signal.

Direct Characterization of a Reactive Lattice-Confined Ru 2 Nitride by Photocrystallography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, Anuvab; Reibenspies, Joseph H.; Chen, Yu-Sheng

2017-02-16

Reactive metal–ligand (M–L) multiply bonded complexes are ubiquitous intermediates in redox catalysis and have thus been long-standing targets of synthetic chemistry. The intrinsic reactivity of mid-to-late M–L multiply bonded complexes renders these structures challenging to isolate and structurally characterize. Although synthetic tuning of the ancillary ligand field can stabilize M–L multiply bonded complexes and result in isolable complexes, these efforts inevitably attenuate the reactivity of the M–L multiple bond. Here, we report the first direct characterization of a reactive Ru2 nitride intermediate by photocrystallography. Photogeneration of reactive M–L multiple bonds within crystalline matrices supports direct characterization of these critical intermediatesmore » without synthetic derivatization.« less

A new leadership curriculum: the multiplication of intelligence.

PubMed

Wiseman, Liz; Bradwejn, Jacques; Westbroek, Erick M

2014-03-01

The authors propose a new model of leadership for the clinical setting. The authors' research suggests that there is latent intelligence inside business and educational organizations because many leaders operate in a way that shuts down the intelligence of others. Such leaders are classified as "Diminishers." In the clinical setting this behavior creates a hidden curriculum in medical education, passing on unprofessional patterns of behavior to future physicians. Other leaders, however, amplify intelligence, produce better outcomes, and grow talent. These leaders are classified as "Multipliers." The authors suggest that Multiplier leadership should become the standard leadership practice in medical schools. Case studies of a Multiplier and a Diminisher are presented and illustrate the positive effect these leaders can have on medical education and health organizations.

A Sequence-Independent Strategy for Detection and Cloning of Circular DNA Virus Genomes by Using Multiply Primed Rolling-Circle Amplification

PubMed Central

Rector, Annabel; Tachezy, Ruth; Van Ranst, Marc

2004-01-01

The discovery of novel viruses has often been accomplished by using hybridization-based methods that necessitate the availability of a previously characterized virus genome probe or knowledge of the viral nucleotide sequence to construct consensus or degenerate PCR primers. In their natural replication cycle, certain viruses employ a rolling-circle mechanism to propagate their circular genomes, and multiply primed rolling-circle amplification (RCA) with φ29 DNA polymerase has recently been applied in the amplification of circular plasmid vectors used in cloning. We employed an isothermal RCA protocol that uses random hexamer primers to amplify the complete genomes of papillomaviruses without the need for prior knowledge of their DNA sequences. We optimized this RCA technique with extracted human papillomavirus type 16 (HPV-16) DNA from W12 cells, using a real-time quantitative PCR assay to determine amplification efficiency, and obtained a 2.4 × 104-fold increase in HPV-16 DNA concentration. We were able to clone the complete HPV-16 genome from this multiply primed RCA product. The optimized protocol was subsequently applied to a bovine fibropapillomatous wart tissue sample. Whereas no papillomavirus DNA could be detected by restriction enzyme digestion of the original sample, multiply primed RCA enabled us to obtain a sufficient amount of papillomavirus DNA for restriction enzyme analysis, cloning, and subsequent sequencing of a novel variant of bovine papillomavirus type 1. The multiply primed RCA method allows the discovery of previously unknown papillomaviruses, and possibly also other circular DNA viruses, without a priori sequence information. PMID:15113879

Condensation heat transfer and flow friction in silicon microchannels

NASA Astrophysics Data System (ADS)

Wu, Huiying; Wu, Xinyu; Qu, Jian; Yu, Mengmeng

2008-11-01

An experimental investigation was performed on heat transfer and flow friction characteristics during steam condensation flow in silicon microchannels. Three sets of trapezoidal silicon microchannels, with hydraulic diameters of 77.5 µm, 93.0 µm and 128.5 µm respectively, were tested under different flow and cooling conditions. It was found that both the condensation heat transfer Nusselt number (Nu) and the condensation two-phase frictional multiplier (phi2Lo) were dependent on the steam Reynolds number (Rev), condensation number (Co) and dimensionless hydraulic diameter (Dh/L). With the increase in the steam Reynolds number, condensation number and dimensionless hydraulic diameter, the condensation Nusselt number increased. However, different variations were observed for the condensation two-phase frictional multiplier. With the increase in the steam Reynolds number and dimensionless hydraulic diameter, the condensation two-phase frictional multiplier decreased, while with the increase in the condensation number, the condensation two-phase frictional multiplier increased. Based on the experimental results, dimensionless correlations for condensation heat transfer and flow friction in silicon microchannels were proposed for the first time. These correlations can be used to determine the condensation heat transfer coefficient and pressure drop in silicon microchannels if the steam mass flow rate, cooling rate and geometric parameters are fixed. It was also found that the condensation heat transfer and flow friction have relations to the injection flow (a transition flow pattern from the annular flow to the slug/bubbly flow), and with injection flow moving toward the outlet, both the condensation heat transfer coefficient and the condensation two-phase frictional multiplier increased.

Regulation of a lightweight high efficiency capacitator diode voltage multiplier dc-dc converter

NASA Technical Reports Server (NTRS)

Harrigill, W. T., Jr.; Myers, I. T.

1976-01-01

A method for the regulation of a capacitor diode voltage multiplier dc-dc converter has been developed which has only minor penalties in weight and efficiency. An auxiliary inductor is used, which only handles a fraction of the total power, to control the output voltage through a pulse width modulation method in a buck boost circuit.

Why Multiply by "g"?

ERIC Educational Resources Information Center

Nelson, Jane Bray

2012-01-01

As a new physics teacher, I was explaining how to find the weight of an object sitting on a table near the surface of the Earth. It bothered me when a student asked, "The object is not accelerating so why do you multiply the mass of the object by the acceleration due to gravity?" I answered something like, "That's true, but if the table were not…

Survey of Multiply Handicapped, Visually Impaired Children in the Rocky Mountain/Great Plains Region.

ERIC Educational Resources Information Center

Gates, Carmella Ficociello

1985-01-01

A survey of visually impaired children (from birth to age 12) in the Rocky Mountain/Great Plains region indicated that the majority were multiply handicapped, and that within this group, the greatest number were in the mild to moderate range. Data are presented on age ranges, current service delivery options, vocational and alternative-living…

12 CFR 563b.355 - What subscription rights must I give to each eligible account holder and each supplemental...

Code of Federal Regulations, 2010 CFR

2010-01-01

... number: The total number of conversion shares that you will issue, multiplied by the following fraction... multiplied fraction to the next whole number. (b) You must give subscription rights to purchase shares to... section, except that you must compute the fraction described in paragraph (a)(3) of this section as...

Development of a Residential Education Program for Emotionally Deprived Pseudo-Retarded Blind Children, Volume I. Final Report.

ERIC Educational Resources Information Center

Rigby, Mary E.; Woodcock, Charles C.

To design a residential school program for multiply handicapped blind children and to develop identifying procedures for prospects for this type of program, 15 children (ages 5 to 13, legally blind, educationally retarded, multiply handicapped) of both sexes were enrolled in a 12 month program. The curriculum was based on a systematic presentation…

The Effects of the Concrete-Representational-Abstract Integration Strategy on the Ability of Students with Learning Disabilities to Multiply Linear Expressions within Area Problems

ERIC Educational Resources Information Center

Strickland, Tricia K.; Maccini, Paula

2013-01-01

We examined the effects of the Concrete-Representational-Abstract Integration strategy on the ability of secondary students with learning disabilities to multiply linear algebraic expressions embedded within contextualized area problems. A multiple-probe design across three participants was used. Results indicated that the integration of the…

Communication: A simplified coupled-cluster Lagrangian for polarizable embedding.

PubMed

Krause, Katharina; Klopper, Wim

2016-01-28

A simplified coupled-cluster Lagrangian, which is linear in the Lagrangian multipliers, is proposed for the coupled-cluster treatment of a quantum mechanical system in a polarizable environment. In the simplified approach, the amplitude equations are decoupled from the Lagrangian multipliers and the energy obtained from the projected coupled-cluster equation corresponds to a stationary point of the Lagrangian.

12 CFR Appendix E to Part 225 - Capital Adequacy Guidelines for Bank Holding Companies: Market Risk Measure

Code of Federal Regulations, 2012 CFR

2012-01-01

... covered debt instrument that is subject to a non-zero specific risk capital charge. (A) For covered debt... indices. (iii) An organization must multiply the absolute value of the current market value of each net... multiply the absolute value of the current market value of each net long or short covered equity position...

Communication: A simplified coupled-cluster Lagrangian for polarizable embedding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krause, Katharina; Klopper, Wim, E-mail: klopper@kit.edu

A simplified coupled-cluster Lagrangian, which is linear in the Lagrangian multipliers, is proposed for the coupled-cluster treatment of a quantum mechanical system in a polarizable environment. In the simplified approach, the amplitude equations are decoupled from the Lagrangian multipliers and the energy obtained from the projected coupled-cluster equation corresponds to a stationary point of the Lagrangian.

Tobacco-free economy: A SAM-based multiplier model to quantify the impact of changes in tobacco demand in Bangladesh.

PubMed

Husain, Muhammad Jami; Khondker, Bazlul Haque

2016-01-01

In Bangladesh, where tobacco use is pervasive, reducing tobacco use is economically beneficial. This paper uses the latest Bangladesh social accounting matrix (SAM) multiplier model to quantify the economy-wide impact of demand-driven changes in tobacco cultivation, bidi industries, and cigarette industries. First, we compute various income multiplier values (i.e. backward linkages) for all production activities in the economy to quantify the impact of changes in demand for the corresponding products on gross output for 86 activities, demand for 86 commodities, returns to four factors of production, and income for eight household groups. Next, we rank tobacco production activities by income multiplier values relative to other sectors. Finally, we present three hypothetical 'tobacco-free economy' scenarios by diverting demand from tobacco products into other sectors of the economy and quantifying the economy-wide impact. The simulation exercises with three different tobacco-free scenarios show that, compared to the baseline values, total sectoral output increases by 0.92%, 1.3%, and 0.75%. The corresponding increases in the total factor returns (i.e. GDP) are 1.57%, 1.75%, and 1.75%. Similarly, total household income increases by 1.40%, 1.58%, and 1.55%.

On the design of a radix-10 online floating-point multiplier

NASA Astrophysics Data System (ADS)

McIlhenny, Robert D.; Ercegovac, Milos D.

2009-08-01

This paper describes an approach to design and implement a radix-10 online floating-point multiplier. An online approach is considered because it offers computational flexibility not available with conventional arithmetic. The design was coded in VHDL and compiled, synthesized, and mapped onto a Virtex 5 FPGA to measure cost in terms of LUTs (look-up-tables) as well as the cycle time and total latency. The routing delay which was not optimized is the major component in the cycle time. For a rough estimate of the cost/latency characteristics, our design was compared to a standard radix-2 floating-point multiplier of equivalent precision. The results demonstrate that even an unoptimized radix-10 online design is an attractive implementation alternative for FPGA floating-point multiplication.

A generalized algorithm to design finite field normal basis multipliers

NASA Technical Reports Server (NTRS)

Wang, C. C.

1986-01-01

Finite field arithmetic logic is central in the implementation of some error-correcting coders and some cryptographic devices. There is a need for good multiplication algorithms which can be easily realized. Massey and Omura recently developed a new multiplication algorithm for finite fields based on a normal basis representation. Using the normal basis representation, the design of the finite field multiplier is simple and regular. The fundamental design of the Massey-Omura multiplier is based on a design of a product function. In this article, a generalized algorithm to locate a normal basis in a field is first presented. Using this normal basis, an algorithm to construct the product function is then developed. This design does not depend on particular characteristics of the generator polynomial of the field.

VLSI architectures for computing multiplications and inverses in GF(2m)

NASA Technical Reports Server (NTRS)

Wang, C. C.; Truong, T. K.; Shao, H. M.; Deutsch, L. J.; Omura, J. K.

1985-01-01

Finite field arithmetic logic is central in the implementation of Reed-Solomon coders and in some cryptographic algorithms. There is a need for good multiplication and inversion algorithms that are easily realized on VLSI chips. Massey and Omura recently developed a new multiplication algorithm for Galois fields based on a normal basis representation. A pipeline structure is developed to realize the Massey-Omura multiplier in the finite field GF(2m). With the simple squaring property of the normal-basis representation used together with this multiplier, a pipeline architecture is also developed for computing inverse elements in GF(2m). The designs developed for the Massey-Omura multiplier and the computation of inverse elements are regular, simple, expandable and, therefore, naturally suitable for VLSI implementation.

VLSI architectures for computing multiplications and inverses in GF(2-m)

NASA Technical Reports Server (NTRS)

Wang, C. C.; Truong, T. K.; Shao, H. M.; Deutsch, L. J.; Omura, J. K.; Reed, I. S.

1983-01-01

Finite field arithmetic logic is central in the implementation of Reed-Solomon coders and in some cryptographic algorithms. There is a need for good multiplication and inversion algorithms that are easily realized on VLSI chips. Massey and Omura recently developed a new multiplication algorithm for Galois fields based on a normal basis representation. A pipeline structure is developed to realize the Massey-Omura multiplier in the finite field GF(2m). With the simple squaring property of the normal-basis representation used together with this multiplier, a pipeline architecture is also developed for computing inverse elements in GF(2m). The designs developed for the Massey-Omura multiplier and the computation of inverse elements are regular, simple, expandable and, therefore, naturally suitable for VLSI implementation.

Anderson transition in a multiply-twisted helix.

PubMed

Ugajin, R

2001-06-01

We investigated the Anderson transition in a multiply-twisted helix in which a helical chain of components, i.e., atoms or nanoclusters, is twisted to produce a doubly-twisted helix, which itself can be twisted to produce a triply-twisted helix, and so on, in which there are couplings between adjacent rounds of helices. As the strength of the on-site random potentials increases, an Anderson transition occurs, suggesting that the number of dimensions is 3 for electrons running along the multiply-twisted helix when the couplings between adjacent rounds are strong enough. If the couplings are weakened, the dimensionality becomes less, resulting in localization of electrons. The effect of random connections between adjacent rounds of helices and random magnetic fields that thread the structure is analyzed using the spectral statistics of a quantum particle.

VLSI architectures for computing multiplications and inverses in GF(2m).

PubMed

Wang, C C; Truong, T K; Shao, H M; Deutsch, L J; Omura, J K; Reed, I S

1985-08-01

Finite field arithmetic logic is central in the implementation of Reed-Solomon coders and in some cryptographic algorithms. There is a need for good multiplication and inversion algorithms that can be easily realized on VLSI chips. Massey and Omura recently developed a new multiplication algorithm for Galois fields based on a normal basis representation. In this paper, a pipeline structure is developed to realize the Massey-Omura multiplier in the finite field GF(2m). With the simple squaring property of the normal basis representation used together with this multiplier, a pipeline architecture is developed for computing inverse elements in GF(2m). The designs developed for the Massey-Omura multiplier and the computation of inverse elements are regular, simple, expandable, and therefore, naturally suitable for VLSI implementation.

Split-Waveguide Mounts For Submillimeter-Wave Multipliers And Harmonic Mixers

NASA Technical Reports Server (NTRS)

Raisanen, Antti; Choudhury, Debabani; Dengler, Robert J.; Oswald, John E.; Siegel, Peter H.

1996-01-01

Novel variation of split-waveguide mount for millimeter-and submillimeter-wavelength frequency multipliers and harmonic mixers developed. Designed to offer wide range of available matching impedances, while maintaining relatively simple fabrication sequence. Wide tuning range achieved with separate series and parallel elements, consisting of two pairs of noncontacting sliding backshorts, at fundamental and harmonic frequencies. Advantages include ease of fabrication, reliability, and tunability.

Bio/Nano Electronic Devices and Sensors

DTIC Science & Technology

2008-10-01

Microscopy and Microanalysis 2006 Meeting, Chicago, IL, July 30 - August 3, 2006 4) S. Khizroev, "Three-dimensional Magnetic Memory," presented at US Air...ABSTRACT This effort consists of five research thrusts: (1) Dense Memory Devices-(1)3-D magnetic recording was enhanced using patterned soft underlayers...and interlayer, (2) Cold cathode microwave generator and ceramic electron multiplier-ceramic multiplier using a novel secondary electron yield

Design and Analysis of Broad-Band Fixed-Tuned Submillimeter-Waveguide Multipliers using MMIC Style Circuit Topology

NASA Technical Reports Server (NTRS)

Bruston, J.; Kim, M.; Martin, S. C.; Mehdi, I.; Smith, R. P.; Siegel, P. H.

1996-01-01

The design and analysis of varactor diode doubler, quadrupler and cascaded doubler circuits for 320 and 640 GHz have been completed. A new approach has been employed to produce a tunerless waveguide mount with a very flexible, frequency scaleable, MMIC style multiplier circuit. The concept, design, predicted performance and measurements on some of the constituent mount elements are presented.

Pathways to Language: A Naturalistic Study of Children with Williams Syndrome and Children with Down Syndrome

ERIC Educational Resources Information Center

Levy, Yonata; Eilam, Ariela

2013-01-01

This is a naturalistic study of the development of language in Hebrew-speaking children with Williams syndrome (WS) and children with Down syndrome (DS), whose MLU extended from 1[multiplied by]0 to 4[multiplied by]4. Developmental curves over the entire span of data collection revealed minor differences between children with WS, children with DS,…

Distortion of the convolution spectra of PSK signals in frequency multipliers

NASA Astrophysics Data System (ADS)

Viniarskii, V. F.; Marchenko, V. F.; Petrin, Iu. M.

1983-09-01

The influence of the input and output circuits of frequency multipliers on the convolution spectrum of binary and ternary PSK signals is examined. It is shown that transient processes caused by the phase switching of the input signal lead to the amplitude-phase modulation of the harmonic signal. Experimental results are presented on the balance circuits of MOS varactor doublers and triplers.

The structure of Airy's stress function in multiply connected regions

NASA Technical Reports Server (NTRS)

Grioli, Giusippe

1951-01-01

In solving two-dimensional problems using Airy's stress function for multiply connected regions, the form of the function depends on the dislocations and boundary forces present. The structure of Airy's function is shown to consist of a part expressible in terms of boundary forces and a part expressible in the manner of Poincare. Meanings of the constants occurring in Poincare's expression are discussed.

12 CFR Appendix C to Part 325 - Risk-Based Capital for State Non-Member Banks: Market Risk

Code of Federal Regulations, 2012 CFR

2012-01-01

... instrument is a covered debt instrument that is subject to a non-zero specific risk capital charge. (A) For... indices. (iii) A bank must multiply the absolute value of the current market value of each net long or... conversion. (iii)(A) A bank must multiply the absolute value of the current market value of each net long or...

A millimeter wave quasi-optical mixer and multiplier

NASA Technical Reports Server (NTRS)

1977-01-01

The results of an experimental study of a biconical quasi-optical Schottky barrier diode mount design which could be used for mixing and multiplying in the frequency range 200-1000 Ghz are reported. The biconical mount is described and characteristics measured at 185 Ghz are presented. The use of the mount for quasi-optical frequency doubling from 56 to 112 Ghz is described and efficiency estimates given.

ELECTRONIC MULTIPLIER

DOEpatents

Collier, D.M.; Meeks, L.A.; Palmer, J.P.

1961-01-31

S>An electronic multiplier is described for use in analog computers. Two electrical input signals are received; one controls the slope of a saw-tooth voltage wave while the other controls the time duration of the wave. A condenser and diode clamps are provided to sustain the crest voltage reached by the wave, and for storing that voltage to provide an output signal which is a steady d-c voltage.

Modified Framingham Risk Factor Score for Systemic Lupus Erythematosus.

PubMed

Urowitz, Murray B; Ibañez, Dominique; Su, Jiandong; Gladman, Dafna D

2016-05-01

The traditional Framingham Risk Factor Score (FRS) underestimates the risk for coronary artery disease (CAD) in patients with systemic lupus erythematosus (SLE). We aimed to determine whether an adjustment to the FRS would more accurately reflect the higher prevalence of CAD among patients with SLE. Patients with SLE without a previous history of CAD or diabetes followed regularly at the University of Toronto Lupus Clinic were included. A modified FRS (mFRS) was calculated by multiplying the items by 1.5, 2, 3, or 4. In the first part of the study, using one-third of all eligible patients, we evaluated the sensitivity and specificity of the FRS and the different multipliers for the mFRS. In the second part of the study, using the remaining 2/3 of the eligible patients, we compared the predictive ability of the FRS to the mFRS. In the third part of the study, we assessed the prediction for CAD in a time-dependent analysis of the FRS and mFRS. There were 905 women (89.3%) with a total of 95 CAD events included. In part 1, we determined that a multiplier of 2 provided the best combination of sensitivity and specificity. In part 2, 2.4% of the patients were classified as moderate/high risk based on the classic FRS and 17.3% using the 2FRS (the FRS with a multiplier of 2). In part 3, a time-dependent covariate analysis for the prediction of the first CAD event revealed an HR of 3.22 (p = 0.07) for the classic FRS and 4.37 (p < 0.0001) for the 2FRS. An mFRS in which each item is multiplied by 2 more accurately predicts CAD in patients with SLE.

A new pulse width reduction technique for pulsed electron paramagnetic resonance spectroscopy.

PubMed

Ohba, Yasunori; Nakazawa, Shigeaki; Kazama, Shunji; Mizuta, Yukio

2008-03-01

We present a new technique for a microwave pulse modulator that generates a short microwave pulse of approximately 1ns for use in an electron paramagnetic resonance (EPR) spectrometer. A quadruple-frequency multiplier that generates a signal of 16-20GHz from an input of 4-5GHz was employed to reduce the rise and fall times of the pulse prepared by a PIN diode switch. We examined the transient response characteristics of a commercial frequency multiplier and found that the device can function as a multiplier for pulsed signal even though it was designed for continuous wave operation. We applied the technique to a Ku band pulsed EPR spectrometer and successfully observed a spin echo signal with a broad excitation bandwidth of approximately 1.6mT using 80 degrees pulses of 1.5ns.

Inference for multivariate regression model based on multiply imputed synthetic data generated via posterior predictive sampling

NASA Astrophysics Data System (ADS)

Moura, Ricardo; Sinha, Bimal; Coelho, Carlos A.

2017-06-01

The recent popularity of the use of synthetic data as a Statistical Disclosure Control technique has enabled the development of several methods of generating and analyzing such data, but almost always relying in asymptotic distributions and in consequence being not adequate for small sample datasets. Thus, a likelihood-based exact inference procedure is derived for the matrix of regression coefficients of the multivariate regression model, for multiply imputed synthetic data generated via Posterior Predictive Sampling. Since it is based in exact distributions this procedure may even be used in small sample datasets. Simulation studies compare the results obtained from the proposed exact inferential procedure with the results obtained from an adaptation of Reiters combination rule to multiply imputed synthetic datasets and an application to the 2000 Current Population Survey is discussed.

On-Chip Power-Combining for High-Power Schottky Diode-Based Frequency Multipliers

NASA Technical Reports Server (NTRS)

Chattopadhyay, Goutam; Mehdi, Imran; Schlecht, Erich T.; Lee, Choonsup; Siles, Jose V.; Maestrini, Alain E.; Thomas, Bertrand; Jung, Cecile D.

2013-01-01

A 1.6-THz power-combined Schottky frequency tripler was designed to handle approximately 30 mW input power. The design of Schottky-based triplers at this frequency range is mainly constrained by the shrinkage of the waveguide dimensions with frequency and the minimum diode mesa sizes, which limits the maximum number of diodes that can be placed on the chip to no more than two. Hence, multiple-chip power-combined schemes become necessary to increase the power-handling capabilities of high-frequency multipliers. The design presented here overcomes difficulties by performing the power-combining directly on-chip. Four E-probes are located at a single input waveguide in order to equally pump four multiplying structures (featuring two diodes each). The produced output power is then recombined at the output using the same concept.

Absence of giant blood Marseille-like virus DNA detection by polymerase chain reaction in plasma from healthy US blood donors and serum from multiply transfused patients from Cameroon.

PubMed

Phan, Tung Gia; Desnues, Christelle; Switzer, William M; Djoko, Cyrille F; Schneider, Bradley S; Deng, Xutao; Delwart, Eric

2015-06-01

A new Marseilleviridae virus family member, giant blood Marseille-like (GBM) virus, was recently reported in persons from France in the serum of an infant with adenitis, in the blood of 4% of healthy blood donors, and in 9% of multiply transfused thalassemia patients. These results suggested the presence of a nucleocytoplasmic large DNA virus potentially transmissible by blood product transfusion. To investigate this possibility we tested the plasma from 113 US blood donors and 74 multiply transfused Cameroon patients for GBM viral DNA using highly sensitive polymerase chain reaction (PCR) assays. GBM DNA was not detected by nested PCR in any of these 187 human specimens. Further testing is required to confirm the occurrence of human GBM virus infections. © 2015 AABB.

Mass-dependent channel electron multiplier operation. [for ion detection

NASA Technical Reports Server (NTRS)

Fields, S. A.; Burch, J. L.; Oran, W. A.

1977-01-01

The absolute counting efficiency and pulse height distributions of a continuous-channel electron multiplier used in the detection of hydrogen, argon and xenon ions are assessed. The assessment technique, which involves the post-acceleration of 8-eV ion beams to energies from 100 to 4000 eV, provides information on counting efficiency versus post-acceleration voltage characteristics over a wide range of ion mass. The charge pulse height distributions for H2 (+), A (+) and Xe (+) were measured by operating the experimental apparatus in a marginally gain-saturated mode. It was found that gain saturation occurs at lower channel multiplier operating voltages for light ions such as H2 (+) than for the heavier ions A (+) and Xe (+), suggesting that the technique may be used to discriminate between these two classes of ions in electrostatic analyzers.

A symmetric version of the generalized alternating direction method of multipliers for two-block separable convex programming.

PubMed

Liu, Jing; Duan, Yongrui; Sun, Min

2017-01-01

This paper introduces a symmetric version of the generalized alternating direction method of multipliers for two-block separable convex programming with linear equality constraints, which inherits the superiorities of the classical alternating direction method of multipliers (ADMM), and which extends the feasible set of the relaxation factor α of the generalized ADMM to the infinite interval [Formula: see text]. Under the conditions that the objective function is convex and the solution set is nonempty, we establish the convergence results of the proposed method, including the global convergence, the worst-case [Formula: see text] convergence rate in both the ergodic and the non-ergodic senses, where k denotes the iteration counter. Numerical experiments to decode a sparse signal arising in compressed sensing are included to illustrate the efficiency of the new method.

A High Efficiency Multiple-Anode 260-340 GHz Frequency Tripler

NASA Technical Reports Server (NTRS)

Maestrini, Alain; Tripon-Canseliet, Charlotte; Ward, John S.; Gill, John J.; Mehdi, Imran

2006-01-01

We report on the fabrication at the Jet Propulsion Laboratory of a fixed-tuned split-block waveguide balanced frequency tripler working in the 260-340 GHz band. This tripler will be the first stage of a x3x3x3 multiplier chain to 2.7 THz (the last stages of which are being fabricated at JPL) and is therefore optimized for high power operation. The multiplier features six GaAs Schottky planar diodes in a balanced configuration integrated on a GaAs membrane. Special attention was put on splitting the input power as evenly as possible among the diodes in order to ensure that no diode is overdriven. Preliminary RF tests indicate that the multiplier covers the expected bandwidth and that the efficiency is in the range 1.5-7.5 % with 100 mW of input power.

An analog neural hardware implementation using charge-injection multipliers and neutron-specific gain control.

PubMed

Massengill, L W; Mundie, D B

1992-01-01

A neural network IC based on a dynamic charge injection is described. The hardware design is space and power efficient, and achieves massive parallelism of analog inner products via charge-based multipliers and spatially distributed summing buses. Basic synaptic cells are constructed of exponential pulse-decay modulation (EPDM) dynamic injection multipliers operating sequentially on propagating signal vectors and locally stored analog weights. Individually adjustable gain controls on each neutron reduce the effects of limited weight dynamic range. A hardware simulator/trainer has been developed which incorporates the physical (nonideal) characteristics of actual circuit components into the training process, thus absorbing nonlinearities and parametric deviations into the macroscopic performance of the network. Results show that charge-based techniques may achieve a high degree of neural density and throughput using standard CMOS processes.

338-GHz Semiconductor Amplifier Module

NASA Technical Reports Server (NTRS)

Samoska, Lorene A.; Gaier, Todd C.; Soria, Mary M.; Fung, King Man; Rasisic, Vesna; Deal, William; Leong, Kevin; Mei, Xiao Bing; Yoshida, Wayne; Liu, Po-Hsin;

Numerical Analysis on Non-Equilibrium Mechanism of Laser-Supported Detonation Wave Using Multiply-Charged Ionization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shiraishi, Hiroyuki

Laser-Supported Detonation (LSD), one type of Laser-Supported Plasma (LSP), is considered as the most important phenomena because it can generate high pressure and high temperature for laser absorption. In this study, I have numerically simulated the 1-D LSD waves propagating through a helium gas, in which Multiply-charged ionization model is considered for describing an accurate ionization process.

Automatic Omega Station and LOP (Line of Position) Selection,

DTIC Science & Technology

1987-09-01

LL- jAj C) LJ b- I- I LL I-0 a- 5~52 3.2.2 SOLAR EFFECTS The sun effects Omega modal interference in several significant ways. Firstly the effect...nx(n+l) TD and F are 2x(n+l) -67- %..T C ..4 . (43). a -Je MT Therefore to form BTH requires 4n multiplies and (H TH)- 1 requires 6 multiplies and

Implementation of a fast digital optical matrix-vector multiplier using a holographic look-up table and residue arithmetic

NASA Technical Reports Server (NTRS)

Habiby, Sarry F.; Collins, Stuart A., Jr.

1987-01-01

The design and implementation of a digital (numerical) optical matrix-vector multiplier are presented. A Hughes liquid crystal light valve, the residue arithmetic representation, and a holographic optical memory are used to construct position coded optical look-up tables. All operations are performed in effectively one light valve response time with a potential for a high information density.

Implementation of a fast digital optical matrix-vector multiplier using a holographic look-up table and residue arithmetic.

PubMed

Habiby, S F; Collins, S A

1987-11-01

The design and implementation of a digital (numerical) optical matrix-vector multiplier are presented. A Hughes liquid crystal light valve, the residue arithmetic representation, and a holographic optical memory are used to construct position coded optical look-up tables. All operations are performed in effectively one light valve response time with a potential for a high information density.

Magnetic Field Due to a Finite Length Current-Carrying Wire Using the Concept of Displacement Current

ERIC Educational Resources Information Center

Buschauer, Robert

2014-01-01

In undergraduate E&M courses the magnetic field due to a finite length, current-carrying wire can be calculated using the Biot-Savart law. However, to the author's knowledge, no textbook presents the calculation of this field using the Ampere-Maxwell law: ?B [multiplied by] dl = µ[subscript 0] (I + e[subscript 0] dF/dt) [multiplied by] 1

Dual concentric crystal low energy photon detector

DOEpatents

Guilmette, R.A.

A photon detector for biological samples includes a block of NaI(T1) having a hole containing a thin walled cylinder of CsI(T1). At least three photo multiplier tubes are evenly spaced around the parameter of the block. Biological samples are placed within the hole, and emissions which are sensed by at least two of the photo multipliers from only the NaI(T1) detector are counted.

Outlook for metal lasers

NASA Technical Reports Server (NTRS)

Russell, G. R.

1976-01-01

Lasers utilizing atomic metallic vapors are considered with emphasis on a double discharge technique and multiply pulsed experiments. Data are presented on the effect of time delay after the first electrical discharge and the effect of lasant temperature along with results of absorption measurements utilizing a 13 mm diameter laser tube. Data obtained from multiply pulsed experiments for discharge diameters varying from 1 to 4 cm indicate that the efficiency increases with the pulsing rate.

Industrial realization of a direct Fourier transform in automated experimental data processing systems

NASA Technical Reports Server (NTRS)

Lyubashevskiy, G. S.

1973-01-01

Fourier processing of automatic signals transforms direct current voltage into a numerical form through bandpass filtration in time-pulse multiplying devices. It is shown that the ratio of the interference energy to the useful signal energy is inversely proportional to the square of the product of the depth of the width modulation and the ratio of the time constant averaging to the cross-multiplied signals.

Tobacco-free economy: A SAM-based multiplier model to quantify the impact of changes in tobacco demand in Bangladesh

PubMed Central

Husain, Muhammad Jami; Khondker, Bazlul Haque

2017-01-01

In Bangladesh, where tobacco use is pervasive, reducing tobacco use is economically beneficial. This paper uses the latest Bangladesh social accounting matrix (SAM) multiplier model to quantify the economy-wide impact of demand-driven changes in tobacco cultivation, bidi industries, and cigarette industries. First, we compute various income multiplier values (i.e. backward linkages) for all production activities in the economy to quantify the impact of changes in demand for the corresponding products on gross output for 86 activities, demand for 86 commodities, returns to four factors of production, and income for eight household groups. Next, we rank tobacco production activities by income multiplier values relative to other sectors. Finally, we present three hypothetical ‘tobacco-free economy’ scenarios by diverting demand from tobacco products into other sectors of the economy and quantifying the economy-wide impact. The simulation exercises with three different tobacco-free scenarios show that, compared to the baseline values, total sectoral output increases by 0.92%, 1.3%, and 0.75%. The corresponding increases in the total factor returns (i.e. GDP) are 1.57%, 1.75%, and 1.75%. Similarly, total household income increases by 1.40%, 1.58%, and 1.55%. PMID:28845091

Proof of feasibility of the Vacuum Silicon PhotoMultiplier Tube (VSiPMT)

NASA Astrophysics Data System (ADS)

Barbarino, G.; Campajola, L.; de Asmundis, R.; De Rosa, G.; Fiorillo, G.; Migliozzi, P.; Barbato, F. C. T.; Mollo, C. M.; Russo, A.; Vivolo, D.

2013-04-01

The Vacuum Silicon PhotoMultiplier Tube (VSiPMT) is an innovative design we propose for a modern hybrid photodetector based on the combination of a Silicon PhotoMultiplier (SiPM) with a hemispherical vacuum glass PMT standard envelope. The basic idea is to replace the classical dynode chain of a PMT with a SiPM, which acts as an electron multiplying detector. Such a solution will match the goal of a large photocathode sensitive area with the performances of a SiPM. This will lead to many advantages such as lower power consumption, mild sensitivity to magnetic fields and high quantum efficiency. The feasibility of this idea has been throughly studied both from a theoretical and experimental point of view. As a first step we performed the full characterization of a special non-windowed Hamamatsu MPPC with a laser source. The response of the SiPM to an electron beam was studied as a function of the energy and of the incident angle by means of a Geant4-based simulation. In this paper we present the preliminary results of the characterization of the SiPM with an electron source and we discuss how the development of next generation SiPMs will overcome the main weaknesses of VSiPMT, such as relatively low PDE and high photocathode voltage.

Experimental evaluation of effective atomic number of composite materials using back-scattering of gamma photons

NASA Astrophysics Data System (ADS)

Singh, Inderjeet; Singh, Bhajan; Sandhu, B. S.; Sabharwal, Arvind D.

2017-04-01

A method has been presented for calculation of effective atomic number (Zeff) of composite materials, by using back-scattering of 662 keV gamma photons obtained from a 137Cs mono-energetic radioactive source. The present technique is a non-destructive approach, and is employed to evaluate Zeff of different composite materials, by interacting gamma photons with semi-infinite material in a back-scattering geometry, using a 3″ × 3″ NaI(Tl) scintillation detector. The present work is undertaken to study the effect of target thickness on intensity distribution of gamma photons which are multiply back-scattered from targets (pure elements) and composites (mixtures of different elements). The intensity of multiply back-scattered events increases with increasing target thickness and finally saturates. The saturation thickness for multiply back-scattered events is used to assign a number (Zeff) for multi-element materials. Response function of the 3″ × 3″ NaI(Tl) scintillation detector is applied on observed pulse-height distribution to include the contribution of partially absorbed photons. The reduced value of signal-to-noise ratio interprets the increase in multiply back-scattered data of a response corrected spectrum. Data obtained from Monte Carlo simulations and literature also support the present experimental results.

The data acquisition system for the ANTARES neutrino telescope

NASA Astrophysics Data System (ADS)

Aguilar, J. A.; Albert, A.; Ameli, F.; Anghinolfi, M.; Anton, G.; Anvar, S.; Aslanides, E.; Aubert, J.-J.; Barbarito, E.; Basa, S.; Battaglieri, M.; Becherini, Y.; Bellotti, R.; Beltramelli, J.; Bertin, V.; Bigi, A.; Billault, M.; Blaes, R.; de Botton, N.; Bouwhuis, M. C.; Bradbury, S. M.; Bruijn, R.; Brunner, J.; Burgio, G. F.; Busto, J.; Cafagna, F.; Caillat, L.; Calzas, A.; Capone, A.; Caponetto, L.; Carmona, E.; Carr, J.; Cartwright, S. L.; Castel, D.; Castorina, E.; Cavasinni, V.; Cecchini, S.; Ceres, A.; Charvis, P.; Chauchot, P.; Chiarusi, T.; Circella, M.; Colnard, C.; Compère, C.; Coniglione, R.; Cottini, N.; Coyle, P.; Cuneo, S.; Cussatlegras, A.-S.; Damy, G.; van Dantzig, R.; de Marzo, C.; Dekeyser, I.; Delagnes, E.; Denans, D.; Deschamps, A.; Dessages-Ardellier, F.; Destelle, J.-J.; Dinkespieler, B.; Distefano, C.; Donzaud, C.; Drogou, J.-F.; Druillole, F.; Durand, D.; Ernenwein, J.-P.; Escoffier, S.; Falchini, E.; Favard, S.; Feinstein, F.; Ferry, S.; Festy, D.; Fiorello, C.; Flaminio, V.; Galeotti, S.; Gallone, J.-M.; Giacomelli, G.; Girard, N.; Gojak, C.; Goret, Ph.; Graf, K.; Hallewell, G.; Harakeh, M. N.; Hartmann, B.; Heijboer, A.; Heine, E.; Hello, Y.; Hernández-Rey, J. J.; Hößl, J.; Hoffman, C.; Hogenbirk, J.; Hubbard, J. R.; Jaquet, M.; Jaspers, M.; de Jong, M.; Jouvenot, F.; Kalantar-Nayestanaki, N.; Kappes, A.; Karg, T.; Karkar, S.; Katz, U.; Keller, P.; Kok, H.; Kooijman, P.; Kopper, C.; Korolkova, E. V.; Kouchner, A.; Kretschmer, W.; Kruijer, A.; Kuch, S.; Kudryavstev, V. A.; Lachartre, D.; Lafoux, H.; Lagier, P.; Lahmann, R.; Lamanna, G.; Lamare, P.; Languillat, J. C.; Laschinsky, H.; Le Guen, Y.; Le Provost, H.; Le van Suu, A.; Legou, T.; Lim, G.; Lo Nigro, L.; Lo Presti, D.; Loehner, H.; Loucatos, S.; Louis, F.; Lucarelli, F.; Lyashuk, V.; Marcelin, M.; Margiotta, A.; Masullo, R.; Mazéas, F.; Mazure, A.; McMillan, J. E.; Megna, R.; Melissas, M.; Migneco, E.; Milovanovic, A.; Mongelli, M.; Montaruli, T.; Morganti, M.; Moscoso, L.; Musumeci, M.; Naumann, C.; Naumann-Godo, M.; Niess, V.; Olivetto, C.; Ostasch, R.; Palanque-Delabrouille, N.; Payre, P.; Peek, H.; Petta, C.; Piattelli, P.; Pineau, J.-P.; Poinsignon, J.; Popa, V.; Pradier, T.; Racca, C.; Randazzo, N.; van Randwijk, J.; Real, D.; van Rens, B.; Réthoré, F.; Rewiersma, P.; Riccobene, G.; Rigaud, V.; Ripani, M.; Roca, V.; Roda, C.; Rolin, J. F.; Romita, M.; Rose, H. J.; Rostovtsev, A.; Roux, J.; Ruppi, M.; Russo, G. V.; Salesa, F.; Salomon, K.; Sapienza, P.; Schmitt, F.; Schuller, J.-P.; Shanidze, R.; Sokalski, I.; Spona, T.; Spurio, M.; van der Steenhoven, G.; Stolarczyk, T.; Streeb, K.; Stubert, D.; Sulak, L.; Taiuti, M.; Tamburini, C.; Tao, C.; Terreni, G.; Thompson, L. F.; Valdy, P.; Valente, V.; Vallage, B.; Venekamp, G.; Verlaat, B.; Vernin, P.; de Vita, R.; de Vries, G.; van Wijk, R.; de Witt Huberts, P.; Wobbe, G.; de Wolf, E.; Yao, A.-F.; Zaborov, D.; Zaccone, H.; Zornoza, J. D.; Zúñiga, J.

2007-01-01

The ANTARES neutrino telescope is being constructed in the Mediterranean Sea. It consists of a large three-dimensional array of photo-multiplier tubes. The data acquisition system of the detector takes care of the digitisation of the photo-multiplier tube signals, data transport, data filtering, and data storage. The detector is operated using a control program interfaced with all elements. The design and the implementation of the data acquisition system are described.

High performance pipelined multiplier with fast carry-save adder

NASA Technical Reports Server (NTRS)

Wu, Angus

1990-01-01

A high-performance pipelined multiplier is described. Its high performance results from the fast carry-save adder basic cell which has a simple structure and is suitable for the Gate Forest semi-custom environment. The carry-save adder computes the sum and carry within two gate delay. Results show that the proposed adder can operate at 200 MHz for a 2-micron CMOS process; better performance is expected in a Gate Forest realization.

Mesh quality control for multiply-refined tetrahedral grids

NASA Technical Reports Server (NTRS)

Biswas, Rupak; Strawn, Roger

1994-01-01

A new algorithm for controlling the quality of multiply-refined tetrahedral meshes is presented in this paper. The basic dynamic mesh adaption procedure allows localized grid refinement and coarsening to efficiently capture aerodynamic flow features in computational fluid dynamics problems; however, repeated application of the procedure may significantly deteriorate the quality of the mesh. Results presented show the effectiveness of this mesh quality algorithm and its potential in the area of helicopter aerodynamics and acoustics.

A matrix contraction process

NASA Astrophysics Data System (ADS)

Wilkinson, Michael; Grant, John

2018-03-01

We consider a stochastic process in which independent identically distributed random matrices are multiplied and where the Lyapunov exponent of the product is positive. We continue multiplying the random matrices as long as the norm, ɛ, of the product is less than unity. If the norm is greater than unity we reset the matrix to a multiple of the identity and then continue the multiplication. We address the problem of determining the probability density function of the norm, \

Enhanced fuel production in thorium/lithium hybrid blankets utilizing uranium multipliers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pitulski, R.H.

1979-10-01

A consistent neutronics analysis is performed to determine the effectiveness of uranium bearing neutron multiplier zones on increasing the production of U/sup 233/ in thorium/lithium blankets for use in a tokamak fusion-fission hybrid reactor. The nuclear performance of these blankets is evaluated as a function of zone thicknesses and exposure by using the coupled transport burnup code ANISN-CINDER-HIC. Various parameters such as U/sup 233/, Pu/sup 239/, and H/sup 3/ production rates, the blanket energy multiplication, isotopic composition of the fuels, and neutron leakages into the various zones are evaluated during a 5 year (6 MW.y.m/sup -2/) exposure period. Although themore » results of this study were obtained for a tokomak magnetic fusion device, the qualitative behavior associated with the use of the uranium bearing neutron multiplier should be applicable to all fusion-fission hybrids.« less

Perdurance of multiply connected de Sitter space

NASA Astrophysics Data System (ADS)

González-Díaz, Pedro F.

1999-06-01

This paper deals with a study of the effects that spherically symmetric first-order metric perturbations and vacuum quantum fluctuations have on the stability of the multiply connected de Sitter spacetime recently proposed by Gott and Li. It is the main conclusion of this study that although such a spacetime is stable to the classical metric perturbations for any size of the nonchronal region, it is only stable against the quantum fluctuations of vacuum if the size of the multiply connected region is of the order of the Planck scale. Therefore, boundary conditions for the state of the universe based on the notion that the universe created itself in a regime where closed timelike curves were active and stable still appear to be physically and philosophically well supported as are those boundary conditions relying on the notion that the universe was created out of nothing.

Application of parallel distributed Lagrange multiplier technique to simulate coupled Fluid-Granular flows in pipes with varying Cross-Sectional area

DOE PAGES

Kanarska, Yuliya; Walton, Otis

2015-11-30

Fluid-granular flows are common phenomena in nature and industry. Here, an efficient computational technique based on the distributed Lagrange multiplier method is utilized to simulate complex fluid-granular flows. Each particle is explicitly resolved on an Eulerian grid as a separate domain, using solid volume fractions. The fluid equations are solved through the entire computational domain, however, Lagrange multiplier constrains are applied inside the particle domain such that the fluid within any volume associated with a solid particle moves as an incompressible rigid body. The particle–particle interactions are implemented using explicit force-displacement interactions for frictional inelastic particles similar to the DEMmore » method with some modifications using the volume of an overlapping region as an input to the contact forces. Here, a parallel implementation of the method is based on the SAMRAI (Structured Adaptive Mesh Refinement Application Infrastructure) library.« less

Encoding Schemes For A Digital Optical Multiplier Using The Modified Signed-Digit Number Representation

NASA Astrophysics Data System (ADS)

Lasher, Mark E.; Henderson, Thomas B.; Drake, Barry L.; Bocker, Richard P.

1986-09-01

The modified signed-digit (MSD) number representation offers full parallel, carry-free addition. A MSD adder has been described by the authors. This paper describes how the adder can be used in a tree structure to implement an optical multiply algorithm. Three different optical schemes, involving position, polarization, and intensity encoding, are proposed for realizing the trinary logic system. When configured in the generic multiplier architecture, these schemes yield the combinatorial logic necessary to carry out the multiplication algorithm. The optical systems are essentially three dimensional arrangements composed of modular units. Of course, this modularity is important for design considerations, while the parallelism and noninterfering communication channels of optical systems are important from the standpoint of reduced complexity. The authors have also designed electronic hardware to demonstrate and model the combinatorial logic required to carry out the algorithm. The electronic and proposed optical systems will be compared in terms of complexity and speed.

Silicon Photo-Multiplier Readouts for Scintillators in High-Energy Astronomy

NASA Technical Reports Server (NTRS)

Bloser, Peter F.; Legere, Jason S.; Bancroft, Christopher M.; McConnell, Mark L.; Ryan, James M.

2008-01-01

New scintillator materials have recently been shown to hold great potential for low-cost, reliable gamma-ray detectors in high-energy astronomy. New devices for the detection of scintillation light promise to make scintillator-based instruments even more attractive by reducing mass and power requirements,in particular, silicon photo-multipliers (SiPMs) are starting to become commercially available that offer gains and quantum efficiencies similar to those of photo-multiplier tubes (PMTs), but with greatly reduced mass, high ruggedness, low voltage requirements, and no sensitivity to magnetic fields. We have conducted laboratory tests of a sample of commercially available SiPMs coupled to LaBr3;Ce, a scintillator of relevance to to future high-energy astrophysics missions. We present results for gamma-ray spectroscopy. compare the SiPM performance to that of a PMT, and discuss the extent to which SiPMs offer significant advantages for scintillator-based space missions.

Noise limitations of multiplier phototubes in the radiation environment of space

NASA Technical Reports Server (NTRS)

Viehmann, W.; Eubanks, A. G.

1976-01-01

The contributions of Cerenkov emission, luminescence, secondary electron emission, and bremsstrahlung to radiation-induced data current and noise of multiplier phototubes were analyzed quantitatively. Fluorescence and Cerenkov emission in the tube window are the major contributors and can quantitatively account for dark count levels observed in orbit. Radiation-induced noise can be minimized by shielding, tube selection, and mode of operation. Optical decoupling of windows and cathode (side-window tubes) leads to further reduction of radiation-induced dark counts, as does reducing the window thickness and effective cathode area, and selection of window/cathode combinations of low fluorescence efficiency. In trapped radiation-free regions of near-earth orbits and in free space, Cerenkov emission by relativistic particles contributes predominantly to the photoelectron yield per event. Operating multiplier phototubes in the photon (pulse) counting mode will discriminate against these large pulses and substantially reduce the dark count and noise to levels determined by fluorescence.

Preconditioned alternating direction method of multipliers for inverse problems with constraints

NASA Astrophysics Data System (ADS)

Jiao, Yuling; Jin, Qinian; Lu, Xiliang; Wang, Weijie

2017-02-01

We propose a preconditioned alternating direction method of multipliers (ADMM) to solve linear inverse problems in Hilbert spaces with constraints, where the feature of the sought solution under a linear transformation is captured by a possibly non-smooth convex function. During each iteration step, our method avoids solving large linear systems by choosing a suitable preconditioning operator. In case the data is given exactly, we prove the convergence of our preconditioned ADMM without assuming the existence of a Lagrange multiplier. In case the data is corrupted by noise, we propose a stopping rule using information on noise level and show that our preconditioned ADMM is a regularization method; we also propose a heuristic rule when the information on noise level is unavailable or unreliable and give its detailed analysis. Numerical examples are presented to test the performance of the proposed method.

Lessons Learned and Flight Results from the F15 Intelligent Flight Control System Project

NASA Technical Reports Server (NTRS)

Bosworth, John

2006-01-01

A viewgraph presentation on the lessons learned and flight results from the F15 Intelligent Flight Control System (IFCS) project is shown. The topics include: 1) F-15 IFCS Project Goals; 2) Motivation; 3) IFCS Approach; 4) NASA F-15 #837 Aircraft Description; 5) Flight Envelope; 6) Limited Authority System; 7) NN Floating Limiter; 8) Flight Experiment; 9) Adaptation Goals; 10) Handling Qualities Performance Metric; 11) Project Phases; 12) Indirect Adaptive Control Architecture; 13) Indirect Adaptive Experience and Lessons Learned; 14) Gen II Direct Adaptive Control Architecture; 15) Current Status; 16) Effect of Canard Multiplier; 17) Simulated Canard Failure Stab Open Loop; 18) Canard Multiplier Effect Closed Loop Freq. Resp.; 19) Simulated Canard Failure Stab Open Loop with Adaptation; 20) Canard Multiplier Effect Closed Loop with Adaptation; 21) Gen 2 NN Wts from Simulation; 22) Direct Adaptive Experience and Lessons Learned; and 23) Conclusions

A high-order perturbation of surfaces method for scattering of linear waves by periodic multiply layered gratings in two and three dimensions

NASA Astrophysics Data System (ADS)

Hong, Youngjoon; Nicholls, David P.

2017-09-01

The capability to rapidly and robustly simulate the scattering of linear waves by periodic, multiply layered media in two and three dimensions is crucial in many engineering applications. In this regard, we present a High-Order Perturbation of Surfaces method for linear wave scattering in a multiply layered periodic medium to find an accurate numerical solution of the governing Helmholtz equations. For this we truncate the bi-infinite computational domain to a finite one with artificial boundaries, above and below the structure, and enforce transparent boundary conditions there via Dirichlet-Neumann Operators. This is followed by a Transformed Field Expansion resulting in a Fourier collocation, Legendre-Galerkin, Taylor series method for solving the problem in a transformed set of coordinates. Assorted numerical simulations display the spectral convergence of the proposed algorithm.

Genetic and economic benefits of selection based on performance recording and genotyping in lower tiers of multi-tiered sheep breeding schemes.

PubMed

Santos, Bruno F S; van der Werf, Julius H J; Gibson, John P; Byrne, Timothy J; Amer, Peter R

2017-01-17

Performance recording and genotyping in the multiplier tier of multi-tiered sheep breeding schemes could potentially reduce the difference in the average genetic merit between nucleus and commercial flocks, and create additional economic benefits for the breeding structure. The genetic change in a multiple-trait breeding objective was predicted for various selection strategies that included performance recording, parentage testing and genomic selection. A deterministic simulation model was used to predict selection differentials and the flow of genetic superiority through the different tiers. Cumulative discounted economic benefits were calculated based on trait gains achieved in each of the tiers and considering the extra revenue and associated costs of applying recording, genotyping and selection practices in the multiplier tier of the breeding scheme. Performance recording combined with genomic or parentage information in the multiplier tier reduced the genetic lag between the nucleus and commercial flock by 2 to 3 years. The overall economic benefits of improved performance in the commercial tier offset the costs of recording the multiplier. However, it took more than 18 years before the cumulative net present value of benefits offset the costs at current test prices. Strategies in which recorded multiplier ewes were selected as replacements for the nucleus flock did modestly increase profitability when compared to a closed nucleus structure. Applying genomic selection is the most beneficial strategy if testing costs can be reduced or by genotyping only a proportion of the selection candidates. When the cost of genotyping was reduced, scenarios that combine performance recording with genomic selection were more profitable and reached breakeven point about 10 years earlier. Economic benefits can be generated in multiplier flocks by implementing performance recording in conjunction with either DNA pedigree recording or genomic technology. These recording practices reduce the long genetic lag between the nucleus and commercial flocks in multi-tiered breeding programs. Under current genotyping costs, the time to breakeven was found to be generally very long, although this varied between strategies. Strategies using either genomic selection or DNA pedigree verification were found to be economically viable provided the price paid for the tests is lower than current prices, in the long-term.

Development of Site-Specific Water Quality Criteria for the Arpa Harbor Wastewater Treatment Plant in Tipalao Bay, Guam

DTIC Science & Technology

2016-07-01

multiplied by the WER, also expressed as DM, which is multiplied by a mixing zone; the product of these three values then are divided by the chemical...involves corrections, additions , and deletions to the national toxicity data set, rendering it more representative of species occurring at a specific...scientific evidence to indicate clear adverse linkages between aluminum and adverse effects to marine organisms. In addition , USEPA has

Statistics of multiply scattered broadband terahertz pulses.

PubMed

Pearce, Jeremy; Jian, Zhongping; Mittleman, Daniel M

2003-07-25

We describe the first measurements of the diffusion of broadband single-cycle optical pulses through a highly scattering medium. Using terahertz time-domain spectroscopy, we measure the electric field of a multiply scattered wave with a time resolution shorter than one optical cycle. This time-domain measurement provides information on the statistics of both the amplitude and phase distributions of the diffusive wave. We develop a theoretical description, suitable for broadband radiation, which adequately describes the experimental results.

Rate of rotation measurement using back-EMFS associated with windings of a brushless DC motor

NASA Technical Reports Server (NTRS)

Howard, David E. (Inventor)

2000-01-01

A system and method are provided for measuring rate of rotation. A brushless DC motor is rotated and produces a back electromagnetic force (emf) on each winding thereof. Each winding's back-emf is integrated and multiplied by the back-emf associated with an adjacent winding. The multiplied outputs associated with each winding are combined to produce a directionally sensitive DC output proportional only to the rate of rotation of the motor's shaft.

Cleaning and activation of beryllium-copper electron multiplier dynodes.

NASA Technical Reports Server (NTRS)

Pongratz, M. B.

1972-01-01

Description of a cleaning and activation procedure followed in preparing beryllium-copper dynodes for electron multipliers used in sounding-rocket experiments to detect auroral electrons. The initial degreasing step involved a 5-min bath in trichloroethylene in an ultrasonic cleaner. This was followed by an ultrasonic rinse in methanol and by a two-step acid pickling treatment to remove the oxides. Additional rinsing in water and methanol was followed by activation in a stainless-steel RF induction oven.

Radiation imaging apparatus

DOEpatents

Anger, Hal O.; Martin, Donn C.; Lampton, Michael L.

1983-01-01

A radiation imaging system using a charge multiplier and a position sensitive anode in the form of periodically arranged sets of interconnected anode regions for detecting the position of the centroid of a charge cloud arriving thereat from the charge multiplier. Various forms of improved position sensitive anodes having single plane electrode connections are disclosed. Various analog and digital signal processing systems are disclosed, including systems which use the fast response of microchannel plates, anodes and preamps to perform scintillation pulse height analysis digitally.

Estimating the population of female sex workers in two Chinese cities on the basis of the HIV/AIDS behavioural surveillance approach combined with a multiplier method

PubMed Central

Zhang, Dapeng; Lv, Fan; Wang, Liyan; Sun, Liangxian; Zhou, Jian; Su, Wenyi; Bi, Peng

2007-01-01

Objective To estimate the size of the population of female sex workers (FSWs) on the basis of the HIV/AIDS behavioural surveillance approach in two Chinese cities, using a multiplier method. Method Relevant questions were inserted into the questionnaires given to two behavioural surveillance groups—female attendees of sexually transmitted disease (STD) clinics and FSWs. The size of the FSW population was derived by multiplying the number of FSWs in selected STD clinics during the study period by the proportion of FSW population who reported having attended the selected STD clinics during the same period. Results The size of the FSW population in the urban area of Xingyi, China, was estimated to be about 2500 (95% CI 2000 to 3400). This accounted for 3.6% of the total urban adult female population. There were an estimated 17 500 FSWs in the urban area of Guiyang, China (95% CI 10 300 to 31 900) or about 3.4% of its total urban adult female population (rounded to the nearest 100). Conclusions The multiplier method could be a useful and cost‐effective approach to estimate the FSW population, especially suitable in countries where HIV behavioural surveillance has been established in high‐risk populations. PMID:17090568

Efficiency Analysis of a High-Specific Impulse Hall Thruster

NASA Technical Reports Server (NTRS)

Jacobson, David (Technical Monitor); Hofer, Richard R.; Gallimore, Alec D.

2004-01-01

Performance and plasma measurements of the high-specific impulse NASA-173Mv2 Hall thruster were analyzed using a phenomenological performance model that accounts for a partially-ionized plasma containing multiply-charged ions. Between discharge voltages of 300 to 900 V, the results showed that although the net decrease of efficiency due to multiply-charged ions was only 1.5 to 3.0 percent, the effects of multiply-charged ions on the ion and electron currents could not be neglected. Between 300 to 900 V, the increase of the discharge current was attributed to the increasing fraction of multiply-charged ions, while the maximum deviation of the electron current from its average value was only +5/-14 percent. These findings revealed how efficient operation at high-specific impulse was enabled through the regulation of the electron current with the applied magnetic field. Between 300 to 900 V, the voltage utilization ranged from 89 to 97 percent, the mass utilization from 86 to 90 percent, and the current utilization from 77 to 81 percent. Therefore, the anode efficiency was largely determined by the current utilization. The electron Hall parameter was nearly constant with voltage, decreasing from an average of 210 at 300 V to an average of 160 between 400 to 900 V. These results confirmed our claim that efficient operation can be achieved only over a limited range of Hall parameters.

Low rank alternating direction method of multipliers reconstruction for MR fingerprinting.

PubMed

Assländer, Jakob; Cloos, Martijn A; Knoll, Florian; Sodickson, Daniel K; Hennig, Jürgen; Lattanzi, Riccardo

2018-01-01

The proposed reconstruction framework addresses the reconstruction accuracy, noise propagation and computation time for magnetic resonance fingerprinting. Based on a singular value decomposition of the signal evolution, magnetic resonance fingerprinting is formulated as a low rank (LR) inverse problem in which one image is reconstructed for each singular value under consideration. This LR approximation of the signal evolution reduces the computational burden by reducing the number of Fourier transformations. Also, the LR approximation improves the conditioning of the problem, which is further improved by extending the LR inverse problem to an augmented Lagrangian that is solved by the alternating direction method of multipliers. The root mean square error and the noise propagation are analyzed in simulations. For verification, in vivo examples are provided. The proposed LR alternating direction method of multipliers approach shows a reduced root mean square error compared to the original fingerprinting reconstruction, to a LR approximation alone and to an alternating direction method of multipliers approach without a LR approximation. Incorporating sensitivity encoding allows for further artifact reduction. The proposed reconstruction provides robust convergence, reduced computational burden and improved image quality compared to other magnetic resonance fingerprinting reconstruction approaches evaluated in this study. Magn Reson Med 79:83-96, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

Improving land surface parameter retrieval by integrating plant traits priors in the MULTIPLY data assimilation platform

NASA Astrophysics Data System (ADS)

Corbin, A. E.; Timmermans, J.; Hauser, L.; Bodegom, P. V.; Soudzilovskaia, N. A.

2017-12-01

There is a growing demand for accurate land surface parameterization from remote sensing (RS) observations. This demand has not been satisfied, because most estimation schemes apply 1) a single-sensor single-scale approach, and 2) require specific key-variables to be `guessed'. This is because of the relevant observational information required to accurately retrieve parameters of interest. Consequently, many schemes assume specific variables to be constant or not present; subsequently leading to more uncertainty. In this aspect, the MULTIscale SENTINEL land surface information retrieval Platform (MULTIPLY) was created. MULTIPLY couples a variety of RS sources with Radiative Transfer Models (RTM) over varying spectral ranges using data-assimilation to estimate geophysical parameters. In addition, MULTIPLY also uses prior information about the land surface to constrain the retrieval problem. This research aims to improve the retrieval of plant biophysical parameters through the use of priors of biophysical parameters/plant traits. Of particular interest are traits (physical, morphological or chemical trait) affecting individual performance and fitness of species. Plant traits that are able to be retrieved via RS and with RTMs include traits such as leaf-pigments, leaf water, LAI, phenols, C/N, etc. In-situ data for plant traits that are retrievable via RS techniques were collected for a meta-analysis from databases such as TRY, Ecosis, and individual collaborators. Of particular interest are the following traits: chlorophyll, carotenoids, anthocyanins, phenols, leaf water, and LAI. ANOVA statistics were generated for each traits according to species, plant functional groups (such as evergreens, grasses, etc.), and the trait itself. Afterwards, traits were also compared using covariance matrices. Using these as priors, MULTIPLY was is used to retrieve several plant traits in two validation sites in the Netherlands (Speulderbos) and in Finland (Sodankylä). Initial comparisons show significant improved results over non-a priori based retrievals.

[Description of the severely injured in the DRG system: is treatment of the severely injured still affordable?].

PubMed

Mahlke, L; Lefering, R; Siebert, H; Windolf, J; Roeder, N; Franz, D

2013-11-01

Due to the heterogeneity of severely injured patients (multiple trauma) it is difficult to assign them to homogeneic diagnosis-related groups (DRG). In recent years this has led to a systematic underfunding in the German reimbursement system (G-DRG) for cases of multiply injured patients. This project aimed to improve the reimbursement by modifying the case allocation algorithms of multiply injured patients within the G-DRG system. A retrospective analysis of standardized G-DRG data according to §21 of the Hospital Reimbursement Act (§ 21 KHEntgG) including case-related cost data from 3,362 critically injured patients from 2007 and 2008 from 10 university hospitals and 7 large municipal hospitals was carried out. For 1,241 cases complementary detailed information was available from the trauma registry of the German Trauma Society to monitor the case allocation of multiply injured patients within the G-DRG system. Analysis of coding and grouping, performance of case allocation and the homogeneity of costs in the G-DRG versions 2008-2012 was carried out. The results showed systematic underfunding of trauma patients in the G-DRG version 2008 but adequate cost covering in the majority of cases with the G-DRG versions 2011 and 2012. Cost coverage was foundfor multiply injured patients from the clinical viewpoint who were identified as multiple trauma by the G-DRG system. Some of the overfunded trauma patients had high intensive care costs. Also there was underfunding for multiple injured patients not identified as such in the G-DRG system. Specific modifications of the G-DRG allocation structures could increase the appropriateness of reimbursement of multiply injured patients. Data-based analysis is an essential prerequisite for a constructive development of the G-DRG system and a necessary tool for the active participation of medical specialist societies.

Deterministic control of broadband light through a multiply scattering medium via the multispectral transmission matrix

PubMed Central

Andreoli, Daria; Volpe, Giorgio; Popoff, Sébastien; Katz, Ori; Grésillon, Samuel; Gigan, Sylvain

2015-01-01

We present a method to measure the spectrally-resolved transmission matrix of a multiply scattering medium, thus allowing for the deterministic spatiospectral control of a broadband light source by means of wavefront shaping. As a demonstration, we show how the medium can be used to selectively focus one or many spectral components of a femtosecond pulse, and how it can be turned into a controllable dispersive optical element to spatially separate different spectral components to arbitrary positions. PMID:25965944

Carbon-Phenolic Cages for High-Speed Bearings. Part II - Bearing Evaluation with a Multiply-Alkylated Cyclopentane (MAC) Lubricant

DTIC Science & Technology

2003-01-01

program manager for the overall effort. The carbon -phenolic cages were fabricated under the direction of Mr. Wei Shih of Allcomp Inc ., City of...friction. The early carbon -phenolic cages were hand wrapped by Allcomp . Since that time, Allcomp has added a wrapping machine that uses uniform tension...AFRL-PR-WP-TR-2003-2032 CARBON -PHENOLIC CAGES FOR HIGH-SPEED BEARINGS Part II - Bearing Evaluation with a Multiply- Alkylated Cyclopentane (MAC

Optical Data Processing for Missile Guidance.

DTIC Science & Technology

1983-09-30

detector outputs are a. This light intensity multiplies the signal in the AG shifted down at a clock rate 1/Tq and if successive cell and At waves leave the...lolit matrix matrix matrix multiplier -ytem. of B. We thus input these later columns ofB into the input LE) array at successive times with their...converted to frequency and time/space by the results Bj, = B.+ I on two successive iterations k and k frequency-multiplexing unit in Fig. 5 as shown in Eq

Radiation imaging apparatus

DOEpatents

Anger, H.O.; Martin, D.C.; Lampton, M.L.

1983-07-26

A radiation imaging system using a charge multiplier and a position sensitive anode in the form of periodically arranged sets of interconnected anode regions for detecting the position of the centroid of a charge cloud arriving thereat from the charge multiplier. Various forms of improved position sensitive anodes having single plane electrode connections are disclosed. Various analog and digital signal processing systems are disclosed, including systems which use the fast response of microchannel plates, anodes and preamps to perform scintillation pulse height analysis digitally. 15 figs.

A method for characterizing after-pulsing and dark noise of PMTs and SiPMs

NASA Astrophysics Data System (ADS)

Butcher, A.; Doria, L.; Monroe, J.; Retière, F.; Smith, B.; Walding, J.

2017-12-01

Photo-multiplier tubes (PMTs) and silicon photo-multipliers (SiPMs) are detectors sensitive to single photons that are widely used for the detection of scintillation and Cerenkov light in subatomic physics and medical imaging. This paper presents a method for characterizing two of the main noise sources that PMTs and SiPMs share: dark noise and correlated noise (after-pulsing). The proposed method allows for a model-independent measurement of the after-pulsing timing distribution and dark noise rate.

The Relation Among the Likelihood Ratio-, Wald-, and Lagrange Multiplier Tests and Their Applicability to Small Samples,

DTIC Science & Technology

1982-04-01

S. (1979), "Conflict Among Criteria for Testing Hypothesis: Extension and Comments," Econometrica, 47, 203-207 Breusch , T. S. and Pagan , A. R. (1980...Savin, N. E. (1977), "Conflict Among Criteria for Testing Hypothesis in the Multivariate Linear Regression Model," Econometrica, 45, 1263-1278 Breusch , T...VNCLASSIFIED RAND//-6756NL U l~ I- THE RELATION AMONG THE LIKELIHOOD RATIO-, WALD-, AND LAGRANGE MULTIPLIER TESTS AND THEIR APPLICABILITY TO SMALL SAMPLES

Efficiency and weight of voltage multiplier type ultra lightweight dc-dc converters

NASA Technical Reports Server (NTRS)

Harrigill, W. T., Jr.; Myers, I. T.

1975-01-01

An analytical and experimental study was made of a capacitor-diode voltage multiplier without a transformer which offers the possibility of high efficiency with light weight. The dc-dc conversion efficiencies of about 94 percent were achieved at output powers of 150 watts at 1000 volts using 8x multiplication. A detailed identification of losses was made, including forward drop losses in component, switching losses, reverse junction capacitance charging losses, and charging losses in the main ladder capacitors.

Statistical Image Recovery From Laser Speckle Patterns With Polarization Diversity

DTIC Science & Technology

2010-09-01

Fourier Transform is taken mapping the data to the pupil plane . The computed phase from this operation is multiplied to the amplitude of the pupil...guess generated by a uniform ran- dom number generator (−π to π). The guessed phase is multiplied to the measured amplitude in the image plane and the... plane data. Again, a Fourier transform is performed mapping the manipulated data set back to the image plane . The computed phase in this op- eration is

Convergence of electromagnetic field components across discontinuous permittivity profiles: comment.

PubMed

Li, Lifeng

2002-07-01

The inverse rule that is described in a recent paper [J. Opt. Soc. Am. A 17, 491 (2000)] is not a multiplication rule for multiplying two infinite series, because it does not address how the terms of two series being multiplied are combined to form the product series. Furthermore, it is not the one that is being used in numerical practice. Therefore the insight that the paper provides into why the inverse rule yields correct results at the points of complementary discontinuities is questionable.

Iodine Plasma Species Measurements in a Hall Effect Thruster Plume

DTIC Science & Technology

2013-05-01

with an ExB probe , an electrostatic analyzer (ESA), and a combined ESA/ExB probe . The distribution of xenon ions was also measured. Multiply charge...of iodine ions was measured with an ExB probe , an electrostatic analyzer (ESA), and a combined ESA/ExB probe . • Results: – Multiply charged species...Test Hardware – Vacuum test facility (6’ diameter) – Faraday probe (MIT) – ESA, ExB, ESA/ExB Probes (Plasma Controls) – Rotary probe arm (about

Economic Benefit of Coal Utilization/Conversion at Air Force Bases: Screening Study

DTIC Science & Technology

1989-08-01

fire-tLbe) boilers that are small enough to be shipped by rail. The field-erected units are larger, water- tube boilers. The pulverized coal-fired and...circulating FBC boilers considered are field-erected, water- tube boilers. Pollution control technology costs were considered to a limited extent. All...Coal/H 0 mix (S/MBtu) = 3.00 OPTIONS Cal/oil mix (S/MBtu) 3.50 Soot blower multiplier = 0.0 Tube bank mod multiplier = 1.0 Primary fuel is 1 Bottom ash

Interatomic Coulombic decay cascades in multiply excited neon clusters

PubMed Central

Nagaya, K.; Iablonskyi, D.; Golubev, N. V.; Matsunami, K.; Fukuzawa, H.; Motomura, K.; Nishiyama, T.; Sakai, T.; Tachibana, T.; Mondal, S.; Wada, S.; Prince, K. C.; Callegari, C.; Miron, C.; Saito, N.; Yabashi, M.; Demekhin, Ph. V.; Cederbaum, L. S.; Kuleff, A. I.; Yao, M.; Ueda, K.

2016-01-01

In high-intensity laser light, matter can be ionized by direct multiphoton absorption even at photon energies below the ionization threshold. However on tuning the laser to the lowest resonant transition, the system becomes multiply excited, and more efficient, indirect ionization pathways become operative. These mechanisms are known as interatomic Coulombic decay (ICD), where one of the species de-excites to its ground state, transferring its energy to ionize another excited species. Here we show that on tuning to a higher resonant transition, a previously unknown type of interatomic Coulombic decay, intra-Rydberg ICD occurs. In it, de-excitation of an atom to a close-lying Rydberg state leads to electron emission from another neighbouring Rydberg atom. Moreover, systems multiply excited to higher Rydberg states will decay by a cascade of such processes, producing even more ions. The intra-Rydberg ICD and cascades are expected to be ubiquitous in weakly-bound systems exposed to high-intensity resonant radiation. PMID:27917867

Learning by Peers: An Alternative Learning Model for Digital Inclusion of Elderly People

NASA Astrophysics Data System (ADS)

de Sales, Márcia Barros; Silveira, Ricardo Azambuja; de Sales, André Barros; de Cássia Guarezi, Rita

This paper presents a model of digital inclusion for the elderly people, using learning by peers methodology. The model’s goal was valuing and promoting the potential capabilities of the elderly people by promoting some of them to instruct other elderly people to deal with computers and to use several software tools and internet services. The project involved 66 volunteering elderly people. However, 19 of them acted effectively as multipliers and the others as students. The process was observed through the empirical technique of interaction workshops. This technique was chosen for demanding direct participation of the people involved in real interaction. We worked with peer learning to facilitate the communication between elderly-learners and elderly-multipliers, due to the similarity in language, rhythm and life history, and because they felt more secure to develop the activities with people in their age group. This multiplying model can be used in centers, organizations and other entities that work with elderly people for their digital inclusion.

Hörmander multipliers on two-dimensional dyadic Hardy spaces

NASA Astrophysics Data System (ADS)

Daly, J.; Fridli, S.

2008-12-01

In this paper we are interested in conditions on the coefficients of a two-dimensional Walsh multiplier operator that imply the operator is bounded on certain of the Hardy type spaces Hp, 0

A High-Speed Design of Montgomery Multiplier

NASA Astrophysics Data System (ADS)

Fan, Yibo; Ikenaga, Takeshi; Goto, Satoshi

With the increase of key length used in public cryptographic algorithms such as RSA and ECC, the speed of Montgomery multiplication becomes a bottleneck. This paper proposes a high speed design of Montgomery multiplier. Firstly, a modified scalable high-radix Montgomery algorithm is proposed to reduce critical path. Secondly, a high-radix clock-saving dataflow is proposed to support high-radix operation and one clock cycle delay in dataflow. Finally, a hardware-reused architecture is proposed to reduce the hardware cost and a parallel radix-16 design of data path is proposed to accelerate the speed. By using HHNEC 0.25μm standard cell library, the implementation results show that the total cost of Montgomery multiplier is 130 KGates, the clock frequency is 180MHz and the throughput of 1024-bit RSA encryption is 352kbps. This design is suitable to be used in high speed RSA or ECC encryption/decryption. As a scalable design, it supports any key-length encryption/decryption up to the size of on-chip memory.

Core–shell PdPb@Pd aerogels with multiply-twinned intermetallic nanostructures: facile synthesis with accelerated gelation kinetics and their enhanced electrocatalytic properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Chengzhou; Shi, Qiurong; Fu, Shaofang

Delicately engineering the well-defined noble metal aerogels with favorable structural and compositional features is of vital importance for wide applications. Here, we reported one-pot and facile method for synthesizing core-shell PdPb@Pd hydrogels/aerogels with multiply-twinned grains and ordered intermetallic phase using sodium hypophosphite as a multifunctional reducing agent. Due to the accelerated gelation kinetics induced by increased reaction temperature and specific function of sodium hypophosphite, the formation of hydrogels can be completed within 4 hrs, far faster than the previous reports. Owe to their unique porous structure and favorable geometric and electronic effects, the optimized PdPb@Pd aerogels exhibit enhanced electrochemical performancemore » towards ethylene glycol oxidation with a mass activity of 5.8 times higher than Pd black.Core–shell PdPb@Pd aerogels with multiply-twinned grains and an ordered intermetallic phase was synthesized, which exhibited good electrocatalytic activity towards ethanol oxidation.« less

Compliant displacement-multiplying apparatus for microelectromechanical systems

DOEpatents

Kota, Sridhar; Rodgers, M. Steven; Hetrick, Joel A.

2001-01-01

A pivotless compliant structure is disclosed that can be used to increase the geometric advantage or mechanical advantage of a microelectromechanical (MEM) actuator such as an electrostatic comb actuator, a capacitive-plate electrostatic actuator, or a thermal actuator. The compliant structure, based on a combination of interconnected flexible beams and cross-beams formed of one or more layers of polysilicon or silicon nitride, can provide a geometric advantage of from about 5:1 to about 60:1 to multiply a 0.25-3 .mu.m displacement provided by a short-stroke actuator so that such an actuator can be used to generate a displacement stroke of about 10-34 .mu.m to operate a ratchet-driven MEM device or a microengine. The compliant structure has less play than conventional displacement-multiplying devices based on lever arms and pivoting joints, and is expected to be more reliable than such devices. The compliant structure and an associated electrostatic or thermal actuator can be formed on a common substrate (e.g. silicon) using surface micromachining.

Comparison of Collisional and Electron-Based Dissociation Modes for Middle-Down Analysis of Multiply Glycosylated Peptides

NASA Astrophysics Data System (ADS)

Khatri, Kshitij; Pu, Yi; Klein, Joshua A.; Wei, Juan; Costello, Catherine E.; Lin, Cheng; Zaia, Joseph

2018-04-01

Analysis of singly glycosylated peptides has evolved to a point where large-scale LC-MS analyses can be performed at almost the same scale as proteomics experiments. While collisionally activated dissociation (CAD) remains the mainstay of bottom-up analyses, it performs poorly for the middle-down analysis of multiply glycosylated peptides. With improvements in instrumentation, electron-activated dissociation (ExD) modes are becoming increasingly prevalent for proteomics experiments and for the analysis of fragile modifications such as glycosylation. While these methods have been applied for glycopeptide analysis in isolated studies, an organized effort to compare their efficiencies, particularly for analysis of multiply glycosylated peptides (termed here middle-down glycoproteomics), has not been made. We therefore compared the performance of different ExD modes for middle-down glycopeptide analyses. We identified key features among the different dissociation modes and show that increased electron energy and supplemental activation provide the most useful data for middle-down glycopeptide analysis. [Figure not available: see fulltext.

Enhanced ground bounce noise reduction in a low-leakage CMOS multiplier

NASA Astrophysics Data System (ADS)

Verma, Bipin Kumar; Akashe, Shyam; Sharma, Sanjay

2015-09-01

In this paper, various parameters are used to reduce leakage power, leakage current and noise margin of circuits to enhance their performance. A multiplier is proposed with low-leakage current and low ground bounce noise for the microprocessor, digital signal processors (DSP) and graphics engines. The ground bounce noise problem appears when a conventional power-gating circuit transits from sleep-to-active mode. This paper discusses a reduction in leakage current in the stacking power-gating technique by three modes - sleep, active and sleep-to-active. The simulation results are performed on a 4 × 4 carry-save multiplier for leakage current, active power, leakage power and ground bounce noise, and comparison made for different nanoscales. Ground bounce noise is limited to 90%. The leakage current of the circuit is decimated up to 80% and the active power is reduced to 31%. We performed simulations using cadence virtuoso 180 and 45 nm at room temperature at various supply voltages.

Size effects in non-linear heat conduction with flux-limited behaviors

NASA Astrophysics Data System (ADS)

Li, Shu-Nan; Cao, Bing-Yang

2017-11-01

Size effects are discussed for several non-linear heat conduction models with flux-limited behaviors, including the phonon hydrodynamic, Lagrange multiplier, hierarchy moment, nonlinear phonon hydrodynamic, tempered diffusion, thermon gas and generalized nonlinear models. For the phonon hydrodynamic, Lagrange multiplier and tempered diffusion models, heat flux will not exist in problems with sufficiently small scale. The existence of heat flux needs the sizes of heat conduction larger than their corresponding critical sizes, which are determined by the physical properties and boundary temperatures. The critical sizes can be regarded as the theoretical limits of the applicable ranges for these non-linear heat conduction models with flux-limited behaviors. For sufficiently small scale heat conduction, the phonon hydrodynamic and Lagrange multiplier models can also predict the theoretical possibility of violating the second law and multiplicity. Comparisons are also made between these non-Fourier models and non-linear Fourier heat conduction in the type of fast diffusion, which can also predict flux-limited behaviors.

ELECTRICAL LOAD ANTICIPATOR AND RECORDER

DOEpatents

Russell, J.B.; Thomas, R.J.

1961-07-25

A system is descrbied in which an indication of the prevailing energy consumption in an electrical power metering system and a projected Power demand for one demand interval is provided at selected increments of time withm the demand interval. Each watthour meter in the system is provided with an impulse generator that generates two impulses for each revolution of the meter disc. The total pulses received frorn all the meters are continuously totaled and are fed to a plurality of parallel connected gated counters. Each counter has its gate opened at different sub-time intervals during the demand interval. A multiplier is connected to each of the gated counters except the last one and each multiplier is provided with a different multiplier constant so as to provide an estimate of the power to be drawn over the entire demand interval at the end of each of the different sub-time intervals. Means are provided for recording the ontputs from the different circuits in synchronism with the actuation oi each gate circuit.

Erratum: ``Structure and Colors of Diffuse Emission in the Spitzer Galactic First Look Survey'' (ApJS, 154, 281 [2004])

NASA Astrophysics Data System (ADS)

Ingalls, James G.; Miville-Deschênes, M.-A.; Reach, William T.; Noriega-Crespo, A.; Carey, Sean J.; Boulanger, F.; Stolovy, S. R.; Padgett, Deborah L.; Burgdorf, M. J.; Fajardo-Acosta, S. B.; Glaccum, W. J.; Helou, G.; Hoard, D. W.; Karr, J.; O'Linger, J.; Rebull, L. M.; Rho, J.; Stauffer, J. R.; Wachter, S.

2006-05-01

We have discovered an error in the scaling of our IRAC 8 μm and MIPS 70 μm data, which affected the caption for Figure 1 and the vertical axis scales for Figure 2. The original units in the images displayed in Figure 1 were MJy sr-1 for 8 μm and μJy arcsec-2 for MIPS 24 and 70 μm. We incorrectly multiplied our IRAC data by 0.0425 (the conversion from μJy arcsec-2 to MJy sr-1), but neglected to multiply our MIPS 70 μm data by that factor. (MIPS 24 μm data were scaled correctly.) Thus, contrary to the caption of Figure 1, the gray levels for panels (a) and (b) actually range from 6.7 to 7.8 MJy sr-1, and the gray levels for panels (e) and (f) actually range from 0.85 to 20.8 MJy sr-1. The power spectra in Figure 2 should have been normalized such that the integral over the spectrum equals the mean square image surface brightness. In the original paper, however, the IRAC power spectrum was incorrectly multiplied by (0.0425)2, whereas the MIPS 70 μm spectrum should have been multiplied by this factor but was not. We correct this in a revised version of Figure 2 included here. We thank Rick Arendt for calling our attention to this error.

Tailoring Ion Charge State Distribution in Tetramethyltin Clusters under Influence of Moderate Intensity Picosecond Laser Pulse: Role of Laser Wavelength and Rate of Energy Deposition

NASA Astrophysics Data System (ADS)

Sharma, Pramod; Das, Soumitra; Vatsa, Rajesh K.

2017-07-01

Systematic manipulation of ionic-outcome in laser-cluster interaction process has been realized for studies carried out on tetramethyltin (TMT) clusters under picosecond laser conditions, determined by choice of laser wavelength and intensity. As a function of laser intensity, TMT clusters exhibit gradual enhancement in overall ionization of its cluster constituents, up to a saturation level of ionization, which was distinct for different wavelengths (266, 355, and 532 nm). Simultaneously, systematic appearance of higher multiply charged atomic ions and shift in relative abundance of multiply charged atomic ions towards higher charge state was observed, using time-of-flight mass spectrometer. At saturation level, multiply charged atomic ions up to (C2+, Sn2+) at 266 nm, (C4+, Sn4+) at 355 nm, and (C4+, Sn6+) at 532 nm were detected. In addition, at 355 nm intra-cluster ion chemistry within the ionized cluster leads to generation of molecular hydrogen ion (H2 +) and triatomic molecular hydrogen ion (H3 +). Generation of multiply charged atomic ions is ascribed to efficient coupling of laser pulse with the cluster media, facilitated by inner-ionized electrons produced within the cluster, at the leading edge of laser pulse. Role of inner-ionized electrons is authenticated by measuring kinetic energy distribution of electrons liberated upon disintegration of excessively ionized cluster, under the influence of picosecond laser pulse.

Robust control design with real parameter uncertainty using absolute stability theory. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

How, Jonathan P.; Hall, Steven R.

1993-01-01

The purpose of this thesis is to investigate an extension of mu theory for robust control design by considering systems with linear and nonlinear real parameter uncertainties. In the process, explicit connections are made between mixed mu and absolute stability theory. In particular, it is shown that the upper bounds for mixed mu are a generalization of results from absolute stability theory. Both state space and frequency domain criteria are developed for several nonlinearities and stability multipliers using the wealth of literature on absolute stability theory and the concepts of supply rates and storage functions. The state space conditions are expressed in terms of Riccati equations and parameter-dependent Lyapunov functions. For controller synthesis, these stability conditions are used to form an overbound of the H2 performance objective. A geometric interpretation of the equivalent frequency domain criteria in terms of off-axis circles clarifies the important role of the multiplier and shows that both the magnitude and phase of the uncertainty are considered. A numerical algorithm is developed to design robust controllers that minimize the bound on an H2 cost functional and satisfy an analysis test based on the Popov stability multiplier. The controller and multiplier coefficients are optimized simultaneously, which avoids the iteration and curve-fitting procedures required by the D-K procedure of mu synthesis. Several benchmark problems and experiments on the Middeck Active Control Experiment at M.I.T. demonstrate that these controllers achieve good robust performance and guaranteed stability bounds.

Modeling Photo-multiplier Gain and Regenerating Pulse Height Data for Application Development

NASA Astrophysics Data System (ADS)

Aspinall, Michael D.; Jones, Ashley R.

2018-01-01

Systems that adopt organic scintillation detector arrays often require a calibration process prior to the intended measurement campaign to correct for significant performance variances between detectors within the array. These differences exist because of low tolerances associated with photo-multiplier tube technology and environmental influences. Differences in detector response can be corrected for by adjusting the supplied photo-multiplier tube voltage to control its gain and the effect that this has on the pulse height spectra from a gamma-only calibration source with a defined photo-peak. Automated methods that analyze these spectra and adjust the photo-multiplier tube bias accordingly are emerging for hardware that integrate acquisition electronics and high voltage control. However, development of such algorithms require access to the hardware, multiple detectors and calibration source for prolonged periods, all with associated constraints and risks. In this work, we report on a software function and related models developed to rescale and regenerate pulse height data acquired from a single scintillation detector. Such a function could be used to generate significant and varied pulse height data that can be used to integration-test algorithms that are capable of automatically response matching multiple detectors using pulse height spectra analysis. Furthermore, a function of this sort removes the dependence on multiple detectors, digital analyzers and calibration source. Results show a good match between the real and regenerated pulse height data. The function has also been used successfully to develop auto-calibration algorithms.

Auditing the multiply-related concepts within the UMLS

PubMed Central

Mougin, Fleur; Grabar, Natalia

2014-01-01

Objective This work focuses on multiply-related Unified Medical Language System (UMLS) concepts, that is, concepts associated through multiple relations. The relations involved in such situations are audited to determine whether they are provided by source vocabularies or result from the integration of these vocabularies within the UMLS. Methods We study the compatibility of the multiple relations which associate the concepts under investigation and try to explain the reason why they co-occur. Towards this end, we analyze the relations both at the concept and term levels. In addition, we randomly select 288 concepts associated through contradictory relations and manually analyze them. Results At the UMLS scale, only 0.7% of combinations of relations are contradictory, while homogeneous combinations are observed in one-third of situations. At the scale of source vocabularies, one-third do not contain more than one relation between the concepts under investigation. Among the remaining source vocabularies, seven of them mainly present multiple non-homogeneous relations between terms. Analysis at the term level also shows that only in a quarter of cases are the source vocabularies responsible for the presence of multiply-related concepts in the UMLS. These results are available at: http://www.isped.u-bordeaux2.fr/ArticleJAMIA/results_multiply_related_concepts.aspx. Discussion Manual analysis was useful to explain the conceptualization difference in relations between terms across source vocabularies. The exploitation of source relations was helpful for understanding why some source vocabularies describe multiple relations between a given pair of terms. PMID:24464853

G-band harmonic multiplying gyrotron traveling-wave amplifier with a mode-selective circuit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeh, Y. S.; Chen, Chang-Hong; Wang, Z. W.

Harmonic multiplying gyrotron traveling-wave amplifiers (gyro-TWAs) permit for magnetic field reduction and frequency multiplication. A high-order-mode harmonic multiplying gyro-TWA with large circuit dimensions and low ohmic loss can achieve a high average power. By amplifying a fundamental harmonic TE{sub 01} drive wave, the second harmonic component of the beam current initiates a TE{sub 02} wave to be amplified. Wall losses can suppress some competing modes because they act as an effective sink of the energy of the modes. However, such wall losses do not suppress all competing modes as the fields are contracted in the copper section in the gyro-TWA.more » An improved mode-selective circuit, using circular waveguides with the specified radii, can provide the rejection points within the frequency range to suppress the competing modes. The simulated results reveal that the mode-selective circuit can provide an attenuation of more than 10 dB to suppress the competing modes (TE{sub 21}, TE{sub 51}, TE{sub 22}, and TE{sub 03}). A G-band second harmonic multiplying gyro-TWA with the mode-selective circuit is predicted to yield a peak output power of 50 kW at 198.8 GHz, corresponding to a saturated gain of 55 dB at an interaction efficiency of 10%. The full width at half maximum bandwidth is 5 GHz.« less

What if LIGO's gravitational wave detections are strongly lensed by massive galaxy clusters?

NASA Astrophysics Data System (ADS)

Smith, Graham P.; Jauzac, Mathilde; Veitch, John; Farr, Will M.; Massey, Richard; Richard, Johan

2018-04-01

Motivated by the preponderance of so-called `heavy black holes' in the binary black hole (BBH) gravitational wave (GW) detections to date, and the role that gravitational lensing continues to play in discovering new galaxy populations, we explore the possibility that the GWs are strongly lensed by massive galaxy clusters. For example, if one of the GW sources were actually located at z = 1, then the rest-frame mass of the associated BHs would be reduced by a factor of ˜2. Based on the known populations of BBH GW sources and strong-lensing clusters, we estimate a conservative lower limit on the number of BBH mergers detected per detector year at LIGO/Virgo's current sensitivity that are multiply-imaged, of Rdetect ≃ 10-5 yr-1. This is equivalent to rejecting the hypothesis that one of the BBH GWs detected to date was multiply-imaged at ≲4σ. It is therefore unlikely, but not impossible, that one of the GWs is multiply-imaged. We identify three spectroscopically confirmed strong-lensing clusters with well-constrained mass models within the 90 per cent credible sky localizations of the BBH GWs from LIGO's first observing run. In the event that one of these clusters multiply-imaged one of the BBH GWs, we predict that 20-60 per cent of the putative next appearances of the GWs would be detectable by LIGO, and that they would arrive at Earth within 3yr of first detection.

Imaging Demonstration of a Glass Gas Electron Multiplier with Electronic Charge Readout

NASA Astrophysics Data System (ADS)

Mitsuya, Yuki; Thuiner, Patrik; Oliveri, Eraldo; Resnati, Filippo; Stenis, Miranda van; Fujiwara, Takeshi; Takahashi, Hiroyuki; Ropelewski, Leszek

2018-02-01

We have developed a Glass Gas Electron Multiplier (Glass GEM, G-GEM), which is composed of two copper electrodes separated by a photosensitive etchable glass substrate having holes arranged in a hexagonal pattern. In this paper, we report the result of imaging using a G-GEM combined with a 2D electronic charge readout. We used a crystallized photosensitive etchable glass as the G-GEM substrate. A precise X-ray image of a small mammal was successfully obtained with position resolutions of approximately 110 to 140 μm in RMS.

Travelling wave solutions and conservation laws for the Korteweg-de Vries-Bejamin-Bona-Mahony equation

NASA Astrophysics Data System (ADS)

Simbanefayi, Innocent; Khalique, Chaudry Masood

2018-03-01

In this work we study the Korteweg-de Vries-Benjamin-Bona-Mahony (KdV-BBM) equation, which describes the two-way propagation of waves. Using Lie symmetry method together with Jacobi elliptic function expansion and Kudryashov methods we construct its travelling wave solutions. Also, we derive conservation laws of the KdV-BBM equation using the variational derivative approach. In this method, we begin by computing second-order multipliers for the KdV-BBM equation followed by a derivation of the respective conservation laws for each multiplier.

Occurrence of the Cys311 DRD2 variant in a pedigree multiply affected with panic disorder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crawford, F.; Hoyne, J.; Diaz, P.

1995-08-14

Following the detection of the rare DRD2 codon 311 variant (Ser{yields}Cys) in an affected member from a large, multiply affected panic disorder family, we investigated the occurrence of this variant in other family members. The variant occurred in both affected and unaffected individuals. Further screening in panic disorder sib pairs unrelated to this family failed to detect the Cys311 variant. Our data suggests that this variant has no pathogenic role in panic disorder. 18 refs., 1 fig.

FAST TRACK COMMUNICATION: Inhomogeneous charge redistribution in Xe clusters exposed to an intense extreme ultraviolet free electron laser

NASA Astrophysics Data System (ADS)

Iwayama, H.; Sugishima, A.; Nagaya, K.; Yao, M.; Fukuzawa, H.; Motomura, K.; Liu, X.-J.; Yamada, A.; Wang, C.; Ueda, K.; Saito, N.; Nagasono, M.; Tono, K.; Yabashi, M.; Ishikawa, T.; Ohashi, H.; Kimura, H.; Togashi, T.

2010-08-01

The emission of highly charged ions from Xe clusters exposed to intense extreme ultraviolet laser pulses (λ ~ 52 nm) from the free electron laser in Japan was investigated using ion momentum spectroscopy. With increasing average cluster size, we observed multiply charged ions Xez + up to z = 3. From kinetic energy distributions, we found that multiply charged ions were generated near the cluster surface. Our results suggest that charges are inhomogeneously redistributed in the cluster to lower the total energy stored in the clusters.

The tip/tilt tracking sensor based on multi-anode photo-multiplier tube

NASA Astrophysics Data System (ADS)

Ma, Xiao-yu; Rao, Chang-hui; Tian, Yu; Wei, Kai

2013-09-01

Based on the demands of high sensitivity, precision and frame rate of tip/tilt tracking sensors in acquisition, tracking and pointing (ATP) systems for satellite-ground optical communications, this paper proposes to employ the multiple-anode photo-multiplier tubes (MAPMTs) in tip/tilt tracking sensors. Meanwhile, an array-type photon-counting system was designed to meet the requirements of the tip/tilt tracking sensors. The experiment results show that the tip/tilt tracking sensors based on MAPMTs can achieve photon sensitivity and high frame rate as well as low noise.

Arc lamp power supply using a voltage multiplier

NASA Technical Reports Server (NTRS)

Leighty, Bradley D.

1988-01-01

A power supply is provided for an arc discharge lamp which includes a relatively low voltage high current power supply section and a high voltage starter circuit. The low voltage section includes a transformer, rectifier, variable resistor and a bank of capacitors, while the starter circuit comprises several diodes and capacitors connected as a Cockcroft-Walton multiplier. The starting circuit is effectively bypassed when the lamp arc is established and serves to automatically provide a high starting voltage to re-strike the lamp arc if the arc is extinguished by a power interruption.

A novel iterative scheme and its application to differential equations.

PubMed

Khan, Yasir; Naeem, F; Šmarda, Zdeněk

2014-01-01

The purpose of this paper is to employ an alternative approach to reconstruct the standard variational iteration algorithm II proposed by He, including Lagrange multiplier, and to give a simpler formulation of Adomian decomposition and modified Adomian decomposition method in terms of newly proposed variational iteration method-II (VIM). Through careful investigation of the earlier variational iteration algorithm and Adomian decomposition method, we find unnecessary calculations for Lagrange multiplier and also repeated calculations involved in each iteration, respectively. Several examples are given to verify the reliability and efficiency of the method.

The Monitoring System of the Operating State of the Gear Wheels of the Torque Multiplier of the Desalination Plant Steam Generator

NASA Astrophysics Data System (ADS)

Danilin, A. I.; Neverov, V. V.; Danilin, S. A.; Shimanov, A. A.; Tsapkova, A. B.

2018-01-01

The article describes a noncontact operational control method based on the processing of a microwave signal reflected from the controlled teeth of the wheel. In this paper describes the influence of wear patterns on the characteristic information parameters of the analyzed signals. The block diagram in section 3 shows the experimental system for monitoring the operating state of the gear wheels of the steam compressor torque multiplier. The design of the primary converter is briefly described.

An inverse problem strategy based on forward model evaluations: Gradient-based optimization without adjoint solves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aguilo Valentin, Miguel Alejandro

2016-07-01

This study presents a new nonlinear programming formulation for the solution of inverse problems. First, a general inverse problem formulation based on the compliance error functional is presented. The proposed error functional enables the computation of the Lagrange multipliers, and thus the first order derivative information, at the expense of just one model evaluation. Therefore, the calculation of the Lagrange multipliers does not require the solution of the computationally intensive adjoint problem. This leads to significant speedups for large-scale, gradient-based inverse problems.

Calculation evaluation of multiplying properties of LWR with thorium fuel

NASA Astrophysics Data System (ADS)

Shamanin, I. V.; Grachev, V. M.; Knyshev, V. V.; Bedenko, S. V.; Novikova, N. G.

2017-01-01

The results of multiplying properties design research of the unit cell and LWR fuel assembly with the high temperature gas-cooled thorium reactor fuel pellet are presented in the work. The calculation evaluation showed the possibility of using thorium in LWR effectively. In this case the amount of fissile isotope is 2.45 times smaller in comparison with the standard loading of LWR. The research and numerical experiments were carried out using the verified accounting code of the program MCU5, modern libraries of evaluated nuclear data and multigroup approximations.

Comparison of Brachyspira hyodysenteriae Isolates Recovered from Pigs in Apparently Healthy Multiplier Herds with Isolates from Herds with Swine Dysentery

PubMed Central

La, Tom; Rohde, Judith; Phillips, Nyree Dale; Hampson, David J.

2016-01-01

Swine dysentery (SD) is a mucohaemorrhagic colitis of grower/finisher pigs classically resulting from infection by the anaerobic intestinal spirochaete Brachyspira hyodysenteriae. This study aimed to determine whether B. hyodysenteriae isolates from pigs in three healthy German multiplier herds supplying gilts to other farms differed from isolates from nine German production herds with SD. Isolates were subjected to whole genomic sequencing, and in silico multilocus sequence typing showed that those from the three multiplier herds were of previously undescribed sequence types (ST132, ST133 and ST134), with all isolates from the same herd having the same ST. All isolates were examined for the presence of 332 genes encoding predicted virulence or virulence lifestyle associated factors, and these were well conserved. Isolates from one multiplier herd were atypical in being weakly haemolytic: they had 10 amino acid substitutions in the haemolysin III protein and five in the haemolysin activation protein compared to reference strain WA1, and had a disruption in the promoter site of the hlyA gene. These changes likely contribute to the weakly haemolytic phenotype and putative lack of virulence. These same isolates also had nine base pair insertions in the iron metabolism genes bitB and bitC and lacked five of six plasmid genes that previously have been associated with colonisation. Other overall differences between isolates from the different herds were in genes from three of five outer membrane proteins, which were not found in all the isolates, and in members of a block of six plasmid genes. Isolates from three herds with SD had all six plasmid genes, while isolates lacking some of these genes were found in the three healthy herds—but also in isolates from six herds with SD. Other differences in genes of unknown function or in gene expression may contribute to variation in virulence; alternatively, superior husbandry and better general health may have made pigs in the two multiplier herds colonised by “typical” strongly haemolytic isolates less susceptible to disease expression. PMID:27489956

Comparison of Brachyspira hyodysenteriae Isolates Recovered from Pigs in Apparently Healthy Multiplier Herds with Isolates from Herds with Swine Dysentery.

PubMed

La, Tom; Rohde, Judith; Phillips, Nyree Dale; Hampson, David J

2016-01-01

Swine dysentery (SD) is a mucohaemorrhagic colitis of grower/finisher pigs classically resulting from infection by the anaerobic intestinal spirochaete Brachyspira hyodysenteriae. This study aimed to determine whether B. hyodysenteriae isolates from pigs in three healthy German multiplier herds supplying gilts to other farms differed from isolates from nine German production herds with SD. Isolates were subjected to whole genomic sequencing, and in silico multilocus sequence typing showed that those from the three multiplier herds were of previously undescribed sequence types (ST132, ST133 and ST134), with all isolates from the same herd having the same ST. All isolates were examined for the presence of 332 genes encoding predicted virulence or virulence lifestyle associated factors, and these were well conserved. Isolates from one multiplier herd were atypical in being weakly haemolytic: they had 10 amino acid substitutions in the haemolysin III protein and five in the haemolysin activation protein compared to reference strain WA1, and had a disruption in the promoter site of the hlyA gene. These changes likely contribute to the weakly haemolytic phenotype and putative lack of virulence. These same isolates also had nine base pair insertions in the iron metabolism genes bitB and bitC and lacked five of six plasmid genes that previously have been associated with colonisation. Other overall differences between isolates from the different herds were in genes from three of five outer membrane proteins, which were not found in all the isolates, and in members of a block of six plasmid genes. Isolates from three herds with SD had all six plasmid genes, while isolates lacking some of these genes were found in the three healthy herds-but also in isolates from six herds with SD. Other differences in genes of unknown function or in gene expression may contribute to variation in virulence; alternatively, superior husbandry and better general health may have made pigs in the two multiplier herds colonised by "typical" strongly haemolytic isolates less susceptible to disease expression.

Gating Deficits are More Heritable and Correlate with Increased Clinical Severity in Schizophrenia Patients with a Positive versus Negative Family History

PubMed Central

Greenwood, Tiffany A.; Light, Gregory A.; Swerdlow, Neal R.; Calkins, Monica E.; Green, Michael F.; Gur, Raquel E.; Gur, Ruben C.; Lazzeroni, Laura C.; Nuechterlein, Keith H.; Olincy, Ann; Radant, Allen D.; Seidman, Larry J.; Siever, Larry J.; Silverman, Jeremy M.; Stone, William S.; Sugar, Catherine A.; Tsuang, Debby W.; Tsuang, Ming T.; Turetsky, Bruce I.; Freedman, Robert; Braff, David L.

2016-01-01

Objective The Consortium on the Genetics of Schizophrenia Family Study (COGS-1) evaluated 12 primary and other supplementary neurocognitive and neurophysiological endophenotypes in schizophrenia probands and their families. Previous analyses of prepulse inhibition (PPI) and P50 gating measures in this sample revealed heritability estimates that were lower than expected based on earlier family studies. Here we investigated whether gating measures were more heritable in multiply affected families with a positive family history vs. families with only a single affected proband (singleton). Method A total of 296 nuclear families consisting of a schizophrenia proband, at least one unaffected sibling, and both parents underwent a comprehensive endophenotype and clinical characterization. The Family Interview for Genetic Studies was administered to all participants and used to obtain convergent psychiatric symptom information for additional first-degree relatives. Among the families, 97 were multiply affected, and 96 were singletons. Results Both PPI and P50 gating displayed significantly increased heritability in the 97 multiply affected families (47% and 36%, respectively), compared with estimates derived from the entire sample of 296 families (29% and 20%, respectively). However, no evidence for heritability was observed for either measure in the 96 singleton families. Schizophrenia probands derived from the multiply affected families also displayed a significantly increased severity of clinical symptoms compared with those derived from singleton families. Conclusions PPI and P50 gating measures demonstrate substantially increased heritability in schizophrenia families with a higher genetic vulnerability for illness, which provides further support for the commonality of genes underlying both schizophrenia and gating measures. PMID:26441157

Pilot Study of Cartilage Repair in the Knee Joint with Multiply Incised Chondral Allograft

PubMed Central

Vancsodi, Jozsef; Farkas, Boglarka; Fazekas, Adam; Nagy, Szilvia Anett; Bogner, Peter; Vermes, Csaba; Than, Peter

2015-01-01

Background Focal cartilage lesions in the knee joint have limited capacity to heal. Current animal experiments show that incisions of the deep zone of a cartilage allograft allow acceptable integration for the graft. Questions/Purposes We performed this clinical study to determine (1) if the multiply incised cartilage graft is surgically applicable for focal cartilage lesions, (2) whether this allograft has a potential to integrate to the repair site, and (3) if patients show clinical improvement. Patients and Methods Seven patients with 8 chondral lesions were enrolled into the study. Symptomatic lesions between 2 and 8 cm2 were accepted. Additional injuries were allowed but were addressed simultaneously. Grafts were tailored to match and the deep zone of the cartilage was multiply incised to augment the basal integration before securing in place. Rigorous postoperative physiotherapy followed. At 12 and 24 months the patients’ satisfaction were measured and serial magnetic resonance imaging (MRI) was performed in 6 patients. Results Following the implantations no adverse reaction occurred. MRI evaluation postoperatively showed the graft in place in 5 out of 6 patients. In 1 patient, MRI suggested partial delamination at 1 year and graft degeneration at 2 years. Short Form–36 health survey and the Lysholm knee score demonstrated a significant improvement in the first year; however, by 2 years there was a noticeable drop in the scores. Conclusions. Multiply incised pure chondral allograft used for cartilage repair appears to be a relatively safe method. Further studies are necessary to assess its potential in cartilage repair before its clinical use. PMID:26069710

Progress on single barrier varactors for submillimeter wave power generation

NASA Technical Reports Server (NTRS)

Nilsen, Svein M.; Groenqvist, Hans; Hjelmgren, Hans; Rydberg, Anders; Kollberg, Erik L.

1992-01-01

Theoretical work on Single Barrier Varactor (SBV) diodes, indicate that the efficiency for a multiplier has a maximum for a considerably smaller capacitance variation than previously thought. The theoretical calculations are performed, both with a simple theoretical model and a complete computer simulation using the method of harmonic balance. Modeling of the SBV is carried out in two steps. First, the semiconductor transport equations are solved simultaneously using a finite difference scheme in one dimension. Secondly, the calculated I-V, and C-V characteristics are input to a multiplier simulator which calculates the optimum impedances, and output powers at the frequencies of interest. Multiple barrier varactors can also be modeled in this way. Several examples on how to design the semiconductor layers to obtain certain characteristics are given. The calculated conversion efficiencies of the modeled structures, in a multiplier circuit, are also presented. Computer simulations for a case study of a 750 GHz multiplier show that InAs diodes perform favorably compared to GaAs diodes. InAs and InGaAs SBV diodes have been fabricated and their current vs. voltage characteristics are presented. In the InAs diode, was the large bandgap semiconductor AlSb used as barrier. The InGaAs diode was grown lattice matched to an InP substrate with InAlAs as a barrier material. The current density is greatly reduced for these two material combinations, compared to that of GaAs/AlGaAs SBV diodes. GaAs based diodes can be biased to higher voltages than InAs diodes.

Fold-change detection and scalar symmetry of sensory input fields.

PubMed

Shoval, Oren; Goentoro, Lea; Hart, Yuval; Mayo, Avi; Sontag, Eduardo; Alon, Uri

2010-09-07

Recent studies suggest that certain cellular sensory systems display fold-change detection (FCD): a response whose entire shape, including amplitude and duration, depends only on fold changes in input and not on absolute levels. Thus, a step change in input from, for example, level 1 to 2 gives precisely the same dynamical output as a step from level 2 to 4, because the steps have the same fold change. We ask what the benefit of FCD is and show that FCD is necessary and sufficient for sensory search to be independent of multiplying the input field by a scalar. Thus, the FCD search pattern depends only on the spatial profile of the input and not on its amplitude. Such scalar symmetry occurs in a wide range of sensory inputs, such as source strength multiplying diffusing/convecting chemical fields sensed in chemotaxis, ambient light multiplying the contrast field in vision, and protein concentrations multiplying the output in cellular signaling systems. Furthermore, we show that FCD entails two features found across sensory systems, exact adaptation and Weber's law, but that these two features are not sufficient for FCD. Finally, we present a wide class of mechanisms that have FCD, including certain nonlinear feedback and feed-forward loops. We find that bacterial chemotaxis displays feedback within the present class and hence, is expected to show FCD. This can explain experiments in which chemotaxis searches are insensitive to attractant source levels. This study, thus, suggests a connection between properties of biological sensory systems and scalar symmetry stemming from physical properties of their input fields.

The Effect of CO 2 on the Measurement of 220Rn and 222Rn with Instruments Utilising Electrostatic Precipitation

DOE PAGES

Lane-Smith, Derek; Sims, Kenneth

2013-06-09

In some volcanic systems, thoron and radon activity and CO 2 flux, in soil and fumaroles, show a relationship between ( 220Rn/ 222Rn) and CO 2 efflux. It is theorized that deep, magmatic sources of gas are characterized by high 222Rn activity and high CO 2 efflux, whereas shallow sources are indicated by high 220Rn activity and relatively low CO 2 efflux. In this paper we evaluate whether the observed inverse relationship is a true geochemical signal, or potentially an analytical artifact of high CO 2 concentrations. We report results from a laboratory experiment using the RAD7 radon detector, knownmore » 222Rn (radon) and 220Rn (thorn), and a controllable percentage of CO 2 in the carrier gas. Our results show that for every percentage of CO 2, the 220Rn reading should be multiplied by 1.019, the 222Rn radon should be multiplied by 1.003 and the 220Rn/ 222Rn ratio should be multiplied by 1.016 to correct for the presence of the CO 2.« less

Does the Price Multiplier Effect also Hold for Stocks?

NASA Astrophysics Data System (ADS)

Maslov, Sergei; Roehner, Bertrand M.

The price multiplier effect provides precious insight into the behavior of investors during episodes of speculative trading. It tells us that the higher the price of an asset (within a set of similar assets), the more its price is likely to increase during the upgoing phase of a speculative price peak. In short, instead of being risk averse, as is often assumed, investors rather seem to be "risk prone". While this effect is known to hold for several sorts of assets, it has not yet been possible to test it for stocks because the price of one share has no intrinsic significance, which means that one cannot say that stock A is more expensive than stock B on the basis of its price. In this paper we show that the price-dividend ratio gives a good basis for assessing the price of stocks in an intrinsic way. When this alternative measure is used instead, it turns out that the price multiplier effect also holds for stocks, at least if one concentrates on samples of companies which are sufficiently homogeneous.

Models for financial crisis detection in Indonesia based on M1, M2 per foreign exchange reverse, and M2 multiplier indicators

NASA Astrophysics Data System (ADS)

Sugiyanto; Zukhronah, Etik; Pratiwi, Esteti Sophia

2017-12-01

Indonesia has been hit by financial crisis in the middle of 1997. The financial crisis that has occurred gives a severe impact to the economy of Indonesia resulting the needs for a detection system of financial crisis. Crisis can be detected based on several indicators such as M1, M2 per foreign exchange reserves, and M2 multiplier. These three indicators can affect the exchange rate stability and may further affect the financial stability so that it can be one of the causes of the financial crisis. This research aims to determine the appropriate model that can detect the financial crisis in Indonesia. Markov switching is an alternative model that can be approach and used often for detecting financial crisis. We can determine the combination of volatility and Markov switching model with AR and volatility model are determined first. The results of this research are that M1 can be modelled by SWARCH (3, 1) while M2 per foreign research exchange reserves and M2 multiplier can be modelled by SWARCH(3,2).

Bi-directional power control system for voltage converter

DOEpatents

Garrigan, Neil Richard; King, Robert Dean; Schwartz, James Edward

1999-01-01

A control system for a voltage converter includes: a power comparator for comparing a power signal on input terminals of the converter with a commanded power signal and producing a power comparison signal; a power regulator for transforming the power comparison signal to a commanded current signal; a current comparator for comparing the commanded current signal with a measured current signal on output terminals of the converter and producing a current comparison signal; a current regulator for transforming the current comparison signal to a pulse width modulator (PWM) duty cycle command signal; and a PWM for using the PWM duty cycle command signal to control electrical switches of the converter. The control system may further include: a command multiplier for converting a voltage signal across the output terminals of the converter to a gain signal having a value between zero (0) and unity (1), and a power multiplier for multiplying the commanded power signal by the gain signal to provide a limited commanded power signal, wherein power comparator compares the limited commanded power signal with the power signal on the input terminals.

Bi-directional power control system for voltage converter

DOEpatents

Garrigan, N.R.; King, R.D.; Schwartz, J.E.

1999-05-11

A control system for a voltage converter includes: a power comparator for comparing a power signal on input terminals of the converter with a commanded power signal and producing a power comparison signal; a power regulator for transforming the power comparison signal to a commanded current signal; a current comparator for comparing the commanded current signal with a measured current signal on output terminals of the converter and producing a current comparison signal; a current regulator for transforming the current comparison signal to a pulse width modulator (PWM) duty cycle command signal; and a PWM for using the PWM duty cycle command signal to control electrical switches of the converter. The control system may further include: a command multiplier for converting a voltage signal across the output terminals of the converter to a gain signal having a value between zero (0) and unity (1), and a power multiplier for multiplying the commanded power signal by the gain signal to provide a limited commanded power signal, wherein power comparator compares the limited commanded power signal with the power signal on the input terminals. 10 figs.

Thermodynamic and Optical Response of Multiply Shocked Liquid Nitromethane

NASA Astrophysics Data System (ADS)

Flanders, B. M.; Winey, J. M.; Gupta, Y. M.

2015-06-01

To investigate the thermodynamic and optical response of multiply shocked liquids, particle velocity profiles were measured for liquid nitromethane (NM) subjected to stepwise loading to a peak pressure of 10 GPa. Using a multi-point velocity interferometer (VISAR), wave profiles were obtained at both the front and rear interfaces of the thin (200 μm) liquid sample to obtain data regarding the thermodynamic response and the refractive index at the intermediate stepwise loading states, in addition to the peak state. Changes in the apparent velocity at the front sample interface were well accounted for by using a Gladstone-Dale relationship to describe the NM index of refraction. The thermodynamic states of multiply shocked NM were examined by comparing the measured wave profiles to those calculated using a published NM equation of state. Although the calculated and measured particle velocity states are in good overall agreement, comparison of the calculated shock wave reverberation times at the front and rear sample interfaces with the measured values suggests that the published NM equation of state can be improved. Work supported by DOE/NNSA.

Effects of cooking using multi-ply cookware on absorption of potassium and vitamins: a randomized double-blind placebo control study

PubMed Central

Mori, Mari; Hamada, Atsumi; Mori, Hideki; Yamori, Yukio; Tsuda, Kinsuke

2012-01-01

This 2-week interventional study involved a randomized allocation of subjects into three groups: Group A (daily ingestion of 350 g vegetables cooked without water using multi-ply [multilayer-structured] cookware), Group B (daily ingestion of 350g vegetables; ordinary cookware) and Group C (routine living). Before and after intervention, each subject underwent health examination with 24-h urine sampling. Blood vitamin C significantly increased after intervention from the baseline in Group A (P < 0.01) and Group B (P < 0.05). β-Carotene levels also increased significantly after intervention in Group A (P < 0.01) and Group B (P < 0.01). Oxidized low-density lipoprotein decreased significantly after intervention in Group A (P < 0.01). In Group A, 24-h urinary potassium excretion increased significantly (P < 0.01) and 24-h urinary sodium (Na)/K ratio improved significantly (P < 0.05) after intervention. In conclusion, a cooking method modification with multi-ply cookware improved absorption of nutrients from vegetables and enhanced effective utilization of the antioxidant potentials of vegetable nutrients. PMID:22229802

Research on a Neutron Detector With a Boron-Lined Honeycomb Neutron Converter

NASA Astrophysics Data System (ADS)

Fang, Zhujun; Yang, Yigang; Li, Yulan; Zhang, Zhi; Wang, Xuewu

2017-04-01

A new design of the boron-lined gaseous neutron detector composed of a boron-lined honeycomb neutron converter and an electron multiplier is proposed in this paper. The motivation for this research was to decrease the manufacturing difficulty and improve the robustness of the boron-lined gaseous neutron detector. The numerous anode wires in the traditional designs were removed, and the gas electron multiplier (GEM) was used as the electron multiplier. To drive the ionized electrons produced inside the honeycomb structure out to the incident surface of the GEM, a drift electric field was applied inside the holes of the honeycomb structure. The design principles of this detector were discussed. Geant4, Maxwell11, and Garfield9 were used to estimate the neutron absorption efficiency and the electron migration process. A prototype detector was constructed and experimentally evaluated. Both the simulation and experimental results indicate that this detector has the potential to be used in the applications of small angle neutron scattering for scientific research, and to replace the currently used 3He detectors, which have the trouble of very limited supply of 3He gas.

The Effect of CO 2 on the Measurement of 220Rn and 222Rn with Instruments Utilising Electrostatic Precipitation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lane-Smith, Derek; Sims, Kenneth

In some volcanic systems, thoron and radon activity and CO 2 flux, in soil and fumaroles, show a relationship between ( 220Rn/ 222Rn) and CO 2 efflux. It is theorized that deep, magmatic sources of gas are characterized by high 222Rn activity and high CO 2 efflux, whereas shallow sources are indicated by high 220Rn activity and relatively low CO 2 efflux. In this paper we evaluate whether the observed inverse relationship is a true geochemical signal, or potentially an analytical artifact of high CO 2 concentrations. We report results from a laboratory experiment using the RAD7 radon detector, knownmore » 222Rn (radon) and 220Rn (thorn), and a controllable percentage of CO 2 in the carrier gas. Our results show that for every percentage of CO 2, the 220Rn reading should be multiplied by 1.019, the 222Rn radon should be multiplied by 1.003 and the 220Rn/ 222Rn ratio should be multiplied by 1.016 to correct for the presence of the CO 2.« less

Covariate Selection for Multilevel Models with Missing Data

PubMed Central

Marino, Miguel; Buxton, Orfeu M.; Li, Yi

2017-01-01

Missing covariate data hampers variable selection in multilevel regression settings. Current variable selection techniques for multiply-imputed data commonly address missingness in the predictors through list-wise deletion and stepwise-selection methods which are problematic. Moreover, most variable selection methods are developed for independent linear regression models and do not accommodate multilevel mixed effects regression models with incomplete covariate data. We develop a novel methodology that is able to perform covariate selection across multiply-imputed data for multilevel random effects models when missing data is present. Specifically, we propose to stack the multiply-imputed data sets from a multiple imputation procedure and to apply a group variable selection procedure through group lasso regularization to assess the overall impact of each predictor on the outcome across the imputed data sets. Simulations confirm the advantageous performance of the proposed method compared with the competing methods. We applied the method to reanalyze the Healthy Directions-Small Business cancer prevention study, which evaluated a behavioral intervention program targeting multiple risk-related behaviors in a working-class, multi-ethnic population. PMID:28239457

Criteria for representing circular arc and sine wave spar webs by non-curved elements

NASA Technical Reports Server (NTRS)

Jenkins, J. M.

1979-01-01

The basic problem of how to simply represent a curved web of a spar in a finite element structural model was addressed. The ratio of flat web to curved web axial deformations and longitudinal rotations were calculated using NASTRAN models. Multiplying factors were developed from these calculations for various web thicknesses. These multiplying factors can be applied directly to the area and moment of inertia inputs of the finite element model. This allows the thermal stress relieving configurations of sine wave and circular arc webs to be simply accounted for in finite element structural models.

Extended performance solar electric propulsion thrust system study. Volume 5. Capacitor-diode voltage multiplier: Technology evaluation

NASA Technical Reports Server (NTRS)

Martinelli, R. M.

1977-01-01

A 1-kW capacitor-diode voltage multiplier (CDVM) was designed, fabricated and tested to demonstrate the power of feasibility of high power CDVM's and to verify the analytical techniques that had been used to predict the performance characteristics of a 6-kw CDVM. High efficiency (96.2%), a low ratio of component weight to power (0.55 kg/kW), and low output ripple voltage (less than 1%, peak to peak) were obtained during the operation of a 1-kW CDVM various input line, load current, and load fault conditions.

Activity of ciprofloxacin against multiply resistant strains of Pseudomonas aeruginosa, Staphylococcus epidermidis, and group JK corynebacteria.

PubMed Central

Venezio, F R; Tatarowicz, W; DiVincenzo, C A; O'Keefe, J P

1986-01-01

The susceptibilities of multiply resistant clinical isolates of Pseudomonas aeurginosa to ciprofloxacin, norfloxacin, and several beta-lactam and aminoglycoside antibiotics were evaluated. Ciprofloxacin also was compared with methicillin and vancomycin against methicillin-resistant Staphylococcus epidermidis and group JK corynebacteria. Ciprofloxacin exhibited the lowest MICs and MBCs for 90% of the isolates among all of the antibiotics tested against P. aeruginosa. In addition, ciprofloxacin exhibited excellent bactericidal activity against the gram-positive organisms. Clinical trials are necessary to confirm the in vitro results and monitor for emergence of resistance. PMID:3101589

A Comparison of the Fully Burdened Cost of Fuel Methodologies Employed Across the Department of Defense

DTIC Science & Technology

2010-09-01

Mission Profile (OMS/MP). Several Courses of Action (COA) will be evaluated. • The base COA using an OMS/MP for the Bradley M2A3 in a HBCT. • A...and multiplying it by the system’s operational Tempo (OPTEMP). For example, the burn rate of the Bradley M2A3 in gallons per hour is multiplied by the...number of hours in the year the Bradley M2A3 is used to get the amount of gallons per year used by the system. There are some differences between

CCD correlation techniques

NASA Technical Reports Server (NTRS)

Hewes, C. R.; Bosshart, P. W.; Eversole, W. L.; Dewit, M.; Buss, D. D.

1976-01-01

Two CCD techniques were discussed for performing an N-point sampled data correlation between an input signal and an electronically programmable reference function. The design and experimental performance of an implementation of the direct time correlator utilizing two analog CCDs and MOS multipliers on a single IC were evaluated. The performance of a CCD implementation of the chirp z transform was described, and the design of a new CCD integrated circuit for performing correlation by multiplication in the frequency domain was presented. This chip provides a discrete Fourier transform (DFT) or inverse DFT, multipliers, and complete support circuitry for the CCD CZT. The two correlation techniques are compared.

Electrostatic Propulsion Beam Divergence Effects on Spacecraft Surfaces. Volume 2, Addendum 1: Ion Time-of-flight Determinations of Doubly to Singly Ionized Mercury Ion Ratios from a Mercury Electron Bombardment Discharge

NASA Technical Reports Server (NTRS)

Sellen, J. M., Jr.; Kemp, R. F.; Hall, D. F.

1973-01-01

The analysis of ion exhaust beam current flow for multiply charged ion species and the application to propellant utilization for the thruster are discussed. The ion engine in use in the experiments is a twenty centimeter diameter electromagnet electron bombardment engine. The experimental technique to determine the multiply charged ion abundance ratios using ion time of flight is described. An analytical treatment of the discharge action in producing various ion species has been carried out.

Diamond Heat-Spreader for Submillimeter-Wave Frequency Multipliers

NASA Technical Reports Server (NTRS)

Lin, Robert H.; Schlecht, Erich T.; Chattopadhyay, Goutam; Gill, John J.; Mehdi, Imran; Siegel, Peter H.; Ward, John S.; Lee, Choonsup; Thomas, Bertrand C.; Maestrini, Alain

2010-01-01

The planar GaAs Shottky diode frequency multiplier is a critical technology for the local oscillator (LO) for submillimeter- wave heterodyne receivers due to low mass, tenability, long lifetime, and room-temperature operation. The use of a W-band (75-100 GHz) power amplifier followed by a frequency multiplier is the most common for submillimeter-wave sources. Its greatest challenge is to provide enough input power to the LO for instruments onboard future planetary missions. Recently, JPL produced 800 mW at 92.5 GHz by combining four MMICs in parallel in a balanced configuration. As more power at W-band is available to the multipliers, their power-handling capability be comes more important. High operating temperatures can lead to degradation of conversion efficiency or catastrophic failure. The goal of this innovation is to reduce the thermal resistance by attaching diamond film as a heat-spreader on the backside of multipliers to improve their power-handling capability. Polycrystalline diamond is deposited by hot-filament chemical vapor deposition (CVD). This diamond film acts as a heat-spreader to both the existing 250- and 300-GHz triplers, and has a high thermal conductivity (1,000-1,200 W/mK). It is approximately 2.5 times greater than copper (401 W/mK) and 20 times greater than GaAs (46 W/mK). It is an electrical insulator (resistivity approx. equals 10(exp 15) Ohms-cm), and has a low relative dielectric constant of 5.7. Diamond heat-spreaders reduce by at least 200 C at 250 mW of input power, compared to the tripler without diamond, according to thermal simulation. This superior thermal management provides a 100-percent increase in power-handling capability. For example, with this innovation, 40-mW output power has been achieved from a 250-GHz tripler at 350-mW input power, while the previous triplers, without diamond, suffered catastrophic failures. This breakthrough provides a stepping-stone for frequency multipliers-based LO up to 3 THz. The future work for this design is to apply the high output power from both the 250 and 300 GHz to multiple chains in order to generate milliwatts at 2.3 THz. Using the first generation of results for this innovation, 40 mW of output power were produced from a 240-GHz tripler at 350-mW input power, and 27- mW output power was produced from a 300-GHz tripler at 408-mW input power. This is two times higher than the current state-of-the-art output power capability. A finite-element thermal simulation also shows that 30-microns thick diamond dropped the temperature of the anodes by at least 200 C.

Shape Analysis of Planar Multiply-Connected Objects Using Conformal Welding.

PubMed

Lok Ming Lui; Wei Zeng; Shing-Tung Yau; Xianfeng Gu

2014-07-01

Shape analysis is a central problem in the field of computer vision. In 2D shape analysis, classification and recognition of objects from their observed silhouettes are extremely crucial but difficult. It usually involves an efficient representation of 2D shape space with a metric, so that its mathematical structure can be used for further analysis. Although the study of 2D simply-connected shapes has been subject to a corpus of literatures, the analysis of multiply-connected shapes is comparatively less studied. In this work, we propose a representation for general 2D multiply-connected domains with arbitrary topologies using conformal welding. A metric can be defined on the proposed representation space, which gives a metric to measure dissimilarities between objects. The main idea is to map the exterior and interior of the domain conformally to unit disks and circle domains (unit disk with several inner disks removed), using holomorphic 1-forms. A set of diffeomorphisms of the unit circle S(1) can be obtained, which together with the conformal modules are used to define the shape signature. A shape distance between shape signatures can be defined to measure dissimilarities between shapes. We prove theoretically that the proposed shape signature uniquely determines the multiply-connected objects under suitable normalization. We also introduce a reconstruction algorithm to obtain shapes from their signatures. This completes our framework and allows us to move back and forth between shapes and signatures. With that, a morphing algorithm between shapes can be developed through the interpolation of the Beltrami coefficients associated with the signatures. Experiments have been carried out on shapes extracted from real images. Results demonstrate the efficacy of our proposed algorithm as a stable shape representation scheme.

Estimating the Effect and Economic Impact of Absenteeism, Presenteeism, and Work Environment-Related Problems on Reductions in Productivity from a Managerial Perspective.

PubMed

Strömberg, Carl; Aboagye, Emmanuel; Hagberg, Jan; Bergström, Gunnar; Lohela-Karlsson, Malin

2017-09-01

The aim of this study was to propose wage multipliers that can be used to estimate the costs of productivity loss for employers in economic evaluations, using detailed information from managers. Data were collected in a survey panel of 758 managers from different sectors of the labor market. Based on assumed scenarios of a period of absenteeism due to sickness, presenteeism and work environment-related problem episodes, and specified job characteristics (i.e., explanatory variables), managers assessed their impact on group productivity and cost (i.e., the dependent variable). In an ordered probit model, the extent of productivity loss resulting from job characteristics is predicted. The predicted values are used to derive wage multipliers based on the cost of productivity estimates provided by the managers. The results indicate that job characteristics (i.e., degree of time sensitivity of output, teamwork, or difficulty in replacing a worker) are linked to productivity loss as a result of health-related and work environment-related problems. The impact of impaired performance on productivity differs among various occupations. The mean wage multiplier is 1.97 for absenteeism, 1.70 for acute presenteeism, 1.54 for chronic presenteeism, and 1.72 for problems related to the work environment. This implies that the costs of health-related and work environment-related problems to organizations can exceed the worker's wage. The use of wage multipliers is recommended for calculating the cost of health-related and work environment-related productivity loss to properly account for actual costs. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

HOW TO FIND GRAVITATIONALLY LENSED TYPE Ia SUPERNOVAE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldstein, Daniel A.; Nugent, Peter E.

2017-01-01

Type Ia supernovae (SNe Ia) that are multiply imaged by gravitational lensing can extend the SN Ia Hubble diagram to very high redshifts ( z ≳ 2), probe potential SN Ia evolution, and deliver high-precision constraints on H {sub 0}, w , and Ω{sub m} via time delays. However, only one, iPTF16geu, has been found to date, and many more are needed to achieve these goals. To increase the multiply imaged SN Ia discovery rate, we present a simple algorithm for identifying gravitationally lensed SN Ia candidates in cadenced, wide-field optical imaging surveys. The technique is to look for supernovaemore » that appear to be hosted by elliptical galaxies, but that have absolute magnitudes implied by the apparent hosts’ photometric redshifts that are far brighter than the absolute magnitudes of normal SNe Ia (the brightest type of supernovae found in elliptical galaxies). Importantly, this purely photometric method does not require the ability to resolve the lensed images for discovery. Active galactic nuclei, the primary sources of contamination that affect the method, can be controlled using catalog cross-matches and color cuts. Highly magnified core-collapse SNe will also be discovered as a byproduct of the method. Using a Monte Carlo simulation, we forecast that the Large Synoptic Survey Telescope can discover up to 500 multiply imaged SNe Ia using this technique in a 10 year z -band search, more than an order of magnitude improvement over previous estimates. We also predict that the Zwicky Transient Facility should find up to 10 multiply imaged SNe Ia using this technique in a 3 year R -band search—despite the fact that this survey will not resolve a single system.« less

Fitness consequences of female multiple mating: A direct test of indirect benefits

PubMed Central

2012-01-01

Background The observation that females mate multiply when males provide nothing but sperm - which sexual selection theory suggests is unlikely to be limiting - continues to puzzle evolutionary biologists. Here we test the hypothesis that multiple mating is prevalent under such circumstances because it enhances female fitness. We do this by allowing female Trinidadian guppies to mate with either a single male or with multiple males, and then tracking the consequences of these matings across two generations. Results Overall, multiply mated females produced 67% more F2 grand-offspring than singly mated females. These offspring, however, did not grow or mature faster, nor were they larger at birth, than F2 grand-offspring of singly mated females. Our results, however, show that multiple mating yields benefits to females in the form of an increase in the production of F1. The higher fecundity among multiply mated mothers was driven by greater production of sons but not daughters. However, contrary to expectation, individually, the offspring of multiply mated females do not grow at different rates than offspring of singly mated females, nor do any indirect fitness benefits or costs accrue to second-generation offspring. Conclusions The study provides strong evidence that multiple mating is advantageous to females, even when males contribute only sperm. This benefit is achieved through an increase in fecundity in the first generation, rather than through other fitness correlates such as size at birth, growth rate, time to sexual maturation and survival. Considered alongside previous work that female guppies can choose to mate with multiple partners, our results provide compelling evidence that direct fitness benefits underpin these mating decisions. PMID:22978442

Rapid detection, classification and accurate alignment of up to a million or more related protein sequences.

PubMed

Neuwald, Andrew F

2009-08-01

The patterns of sequence similarity and divergence present within functionally diverse, evolutionarily related proteins contain implicit information about corresponding biochemical similarities and differences. A first step toward accessing such information is to statistically analyze these patterns, which, in turn, requires that one first identify and accurately align a very large set of protein sequences. Ideally, the set should include many distantly related, functionally divergent subgroups. Because it is extremely difficult, if not impossible for fully automated methods to align such sequences correctly, researchers often resort to manual curation based on detailed structural and biochemical information. However, multiply-aligning vast numbers of sequences in this way is clearly impractical. This problem is addressed using Multiply-Aligned Profiles for Global Alignment of Protein Sequences (MAPGAPS). The MAPGAPS program uses a set of multiply-aligned profiles both as a query to detect and classify related sequences and as a template to multiply-align the sequences. It relies on Karlin-Altschul statistics for sensitivity and on PSI-BLAST (and other) heuristics for speed. Using as input a carefully curated multiple-profile alignment for P-loop GTPases, MAPGAPS correctly aligned weakly conserved sequence motifs within 33 distantly related GTPases of known structure. By comparison, the sequence- and structurally based alignment methods hmmalign and PROMALS3D misaligned at least 11 and 23 of these regions, respectively. When applied to a dataset of 65 million protein sequences, MAPGAPS identified, classified and aligned (with comparable accuracy) nearly half a million putative P-loop GTPase sequences. A C++ implementation of MAPGAPS is available at http://mapgaps.igs.umaryland.edu. Supplementary data are available at Bioinformatics online.

Estimating Leptospirosis Incidence Using Hospital-Based Surveillance and a Population-Based Health Care Utilization Survey in Tanzania

PubMed Central

Biggs, Holly M.; Hertz, Julian T.; Munishi, O. Michael; Galloway, Renee L.; Marks, Florian; Saganda, Wilbrod; Maro, Venance P.; Crump, John A.

2013-01-01

Background The incidence of leptospirosis, a neglected zoonotic disease, is uncertain in Tanzania and much of sub-Saharan Africa, resulting in scarce data on which to prioritize resources for public health interventions and disease control. In this study, we estimate the incidence of leptospirosis in two districts in the Kilimanjaro Region of Tanzania. Methodology/Principal Findings We conducted a population-based household health care utilization survey in two districts in the Kilimanjaro Region of Tanzania and identified leptospirosis cases at two hospital-based fever sentinel surveillance sites in the Kilimanjaro Region. We used multipliers derived from the health care utilization survey and case numbers from hospital-based surveillance to calculate the incidence of leptospirosis. A total of 810 households were enrolled in the health care utilization survey and multipliers were derived based on responses to questions about health care seeking in the event of febrile illness. Of patients enrolled in fever surveillance over a 1 year period and residing in the 2 districts, 42 (7.14%) of 588 met the case definition for confirmed or probable leptospirosis. After applying multipliers to account for hospital selection, test sensitivity, and study enrollment, we estimated the overall incidence of leptospirosis ranges from 75–102 cases per 100,000 persons annually. Conclusions/Significance We calculated a high incidence of leptospirosis in two districts in the Kilimanjaro Region of Tanzania, where leptospirosis incidence was previously unknown. Multiplier methods, such as used in this study, may be a feasible method of improving availability of incidence estimates for neglected diseases, such as leptospirosis, in resource constrained settings. PMID:24340122

Auditing the multiply-related concepts within the UMLS.

PubMed

Mougin, Fleur; Grabar, Natalia

2014-10-01

This work focuses on multiply-related Unified Medical Language System (UMLS) concepts, that is, concepts associated through multiple relations. The relations involved in such situations are audited to determine whether they are provided by source vocabularies or result from the integration of these vocabularies within the UMLS. We study the compatibility of the multiple relations which associate the concepts under investigation and try to explain the reason why they co-occur. Towards this end, we analyze the relations both at the concept and term levels. In addition, we randomly select 288 concepts associated through contradictory relations and manually analyze them. At the UMLS scale, only 0.7% of combinations of relations are contradictory, while homogeneous combinations are observed in one-third of situations. At the scale of source vocabularies, one-third do not contain more than one relation between the concepts under investigation. Among the remaining source vocabularies, seven of them mainly present multiple non-homogeneous relations between terms. Analysis at the term level also shows that only in a quarter of cases are the source vocabularies responsible for the presence of multiply-related concepts in the UMLS. These results are available at: http://www.isped.u-bordeaux2.fr/ArticleJAMIA/results_multiply_related_concepts.aspx. Manual analysis was useful to explain the conceptualization difference in relations between terms across source vocabularies. The exploitation of source relations was helpful for understanding why some source vocabularies describe multiple relations between a given pair of terms. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

How to Find Gravitationally Lensed Type Ia supernovae

DOE PAGES

Goldstein, Daniel A.; Nugent, Peter E.

2016-12-29

Type Ia supernovae (SNe Ia) that are multiply imaged by gravitational lensing can extend the SN Ia Hubble diagram to very high redshifts (z ≳ 2), probe potential SN Ia evolution, and deliver high-precision constraints on H 0, w, and Ω m via time delays. However, only one, iPTF16geu, has been found to date, and many more are needed to achieve these goals. To increase the multiply imaged SN Ia discovery rate, we present a simple algorithm for identifying gravitationally lensed SN Ia candidates in cadenced, wide-field optical imaging surveys. The technique is to look for supernovae that appear tomore » be hosted by elliptical galaxies, but that have absolute magnitudes implied by the apparent hosts' photometric redshifts that are far brighter than the absolute magnitudes of normal SNe Ia (the brightest type of supernovae found in elliptical galaxies). Importantly, this purely photometric method does not require the ability to resolve the lensed images for discovery. Active galactic nuclei, the primary sources of contamination that affect the method, can be controlled using catalog cross-matches and color cuts. Highly magnified core-collapse SNe will also be discovered as a byproduct of the method. Using a Monte Carlo simulation, we forecast that the Large Synoptic Survey Telescope can discover up to 500 multiply imaged SNe Ia using this technique in a 10 year z-band search, more than an order of magnitude improvement over previous estimates. Finally, we also predict that the Zwicky Transient Facility should find up to 10 multiply imaged SNe Ia using this technique in a 3 year R-band search - despite the fact that this survey will not resolve a single system.« less

Rapid identification of antibiotic-resistant corynebacteria with the API 20S system.

PubMed Central

Kelly, M C; Smith, I D; Anstey, R J; Thornley, J H; Rennie, R P

1984-01-01

The API 20S system (Analytab Products, Plainview, N.Y.) was evaluated for the rapid identification of multiply antibiotic-resistant aerobic diphtheroids. Sixty-eight clinical isolates of multiply resistant Centers for Disease Control group JK and group D2 corynebacteria had API 20S profiles which were clearly different from those of a number of strains of other Corynebacterium species which were tested. The API 20S system allowed more rapid identification of antibiotic-resistant diphtheroids than conventional biochemical tests. Its use for corynebacteria other than group JK and group D2 is not recommended at this time. PMID:6699150

Design of a Wideband 900 GHz Balanced Frequency Tripler for Radioastronomy

NASA Technical Reports Server (NTRS)

Tripon-Canseliet, Charlotte; Maestrini, Alain; Mehdi, Imran

2004-01-01

We report on the design of a fix-tuned split-block waveguide balanced frequency tripler working nominally at 900GHz. It uses a GaAs Schottky planar diode pair in a balanced configuration. The circuit will be fabricated with JPL membrane technology in order to minimize dielectric loading. The multiplier is bias-less to dramatically ease the mounting and the operating procedure. At room temperature, the expected output power is 50- 130 (micro)W in the band 800-970 GHz when the tripler is pumped with 4mW. By modifying the waveguide input and output matching circuit, the multiplier can be tuned to operate at lower frequencies.

Preliminary Evaluation of Greases for Space Mechanisms Using a Vacuum Spiral Orbit Tribometer

NASA Technical Reports Server (NTRS)

Marchetti, Mario; Jones, William R., Jr.; Street, Kenneth W.; Pepper, Stephen V.; Jansen, Mark J.

2001-01-01

Most currently used greases for space applications are based on perfluoropolyalkylethers (PFPE) and multiply alkylated cyclopentane (MAC) oils. Evaluation of the greases includes outgassing properties, rheological behavior, and particularly the ability to create EHL films under conditions as close as possible to an actual application. A spiral orbit tribometer (SOT) has been developed to conduct accelerated tests under realistic conditions. The SOT was employed to evaluate two greases used in space mechanisms: a PFPE oil with polytetrafluoroethylene (PTFE) thickener, and a multiply alkylated cyclopentane oil with n-octadecylterephthalamate soap. The results from the greases are in agreement with results previously obtained with the base oils.

Gamma-ray blind beta particle probe

DOEpatents

Weisenberger, Andrew G.

2001-01-01

An intra-operative beta particle probe is provided by placing a suitable photomultiplier tube (PMT), micro channel plate (MCP) or other electron multiplier device within a vacuum housing equipped with: 1) an appropriate beta particle permeable window; and 2) electron detection circuitry. Beta particles emitted in the immediate vicinity of the probe window will be received by the electron multiplier device and amplified to produce a detectable signal. Such a device is useful as a gamma insensitive, intra-operative, beta particle probe in surgeries where the patient has been injected with a beta emitting radiopharmaceutical. The method of use of such a device is also described, as is a position sensitive such device.

Did we misunderstand how to calculate total stroke work in mitral regurgitation by echocardiography?

PubMed

Shingu, Yasushige; Matsui, Yoshiro

2012-01-01

Total stroke work (TSW) is used for the estimation of cardiac efficiency in mitral regurgitation (MR). We should be cautious about the interpretation of this parameter, especially when it is assessed by non-invasive methods such as echocardiography. For the calculation of regurgitant stroke work, regurgitant volume is usually multiplied by left atrial (LA) pressure. However, by considering the left ventricular (LV) pressure-volume loop, it would be more appropriate to multiply regurgitant volume and the LV pressure, not the atrial one. We might underestimate TSW when we use LA pressure for the estimation of regurgitant stroke work.

Derivation of phase functions from multiply scattered sunlight transmitted through a hazy atmosphere

NASA Technical Reports Server (NTRS)

Weinman, J. A.; Twitty, J. T.; Browning, S. R.; Herman, B. M.

1975-01-01

The intensity of sunlight multiply scattered in model atmospheres is derived from the equation of radiative transfer by an analytical small-angle approximation. The approximate analytical solutions are compared to rigorous numerical solutions of the same problem. Results obtained from an aerosol-laden model atmosphere are presented. Agreement between the rigorous and the approximate solutions is found to be within a few per cent. The analytical solution to the problem which considers an aerosol-laden atmosphere is then inverted to yield a phase function which describes a single scattering event at small angles. The effect of noisy data on the derived phase function is discussed.

Engineering issues for hand-held sensing devices, with examples

NASA Astrophysics Data System (ADS)

Freiwald, David A.; Freiwald, Joyce

1994-03-01

It is now U.S. defense policy that there will be no new platform starts. The emphasis for platforms will be on O&M cost reduction, life-extension improvements, and force-multiplier- device upgrades. There is also an increasing emphasis on hand-held force-multiplier devices for individuals, which is the focus of this paper. Engineering issues include operations analysis, weight, cube, cost, prime power, ease of use, data storage, reliability, fault tolerance, data communications and human factors. Two examples of hand-held devices are given. Applications include USMC, Army, SOCOM, DEA, FBI, SS, Border Patrol and others. Barriers to adoption of such technology are also discussed.

Multiply controlled verbal operants: an analysis and extension to the picture exchange communication system.

PubMed

Bondy, Andy; Tincani, Matt; Frost, Lori

2004-01-01

This paper presents Skinner's (1957) analysis of verbal behavior as a framework for understanding language acquisition in children with autism. We describe Skinner's analysis of pure and impure verbal operants and illustrate how this analysis may be applied to the design of communication training programs. The picture exchange communication system (PECS) is a training program influenced by Skinner's framework. We describe the training sequence associated with PECS and illustrate how this sequence may establish multiply controlled verbal behavior in children with autism. We conclude with an examination of how Skinner's framework may apply to other communication modalities and training strategies.

A feedforward artificial neural network based on quantum effect vector-matrix multipliers.

PubMed

Levy, H J; McGill, T C

1993-01-01

The vector-matrix multiplier is the engine of many artificial neural network implementations because it can simulate the way in which neurons collect weighted input signals from a dendritic arbor. A new technology for building analog weighting elements that is theoretically capable of densities and speeds far beyond anything that conventional VLSI in silicon could ever offer is presented. To illustrate the feasibility of such a technology, a small three-layer feedforward prototype network with five binary neurons and six tri-state synapses was built and used to perform all of the fundamental logic functions: XOR, AND, OR, and NOT.

Reducing gain shifts in photomultiplier tubes

DOEpatents

Cohn, Charles E.

1976-01-01

A means is provided for reducing gain shifts in multiplier tubes due to varying event count rates. It includes means for limiting the number of cascaded, active dynodes of the multiplier tube to a predetermined number with the last of predetermined number of dynodes being the output terminal of the tube. This output is applied to an amplifier to make up for the gain sacrificed by not totally utilizing all available active stages of the tube. Further reduction is obtained by illuminating the predetermined number of dynodes with a light source of such intensity that noise appearing at the output dynode associated with the illumination is negligible.

EXAMPLES OF LANDFILL-GENERATED PLUMES IN LOW-RELIEF AREAS, SOUTHEAST FLORIDA.

USGS Publications Warehouse

Russell, Gary M.; Stewart, Mark; Higer, Aaron L.

1987-01-01

Examples of effects of low topographic relief are noted in southeast Florida where water-table gradients are 7 multiplied by 10** minus **4 to 5 multiplied by 10** minus **4 feet per foot. Water-table mounding beneath the landfill and the drainage effects of nearby ditches and well have created multiple leachate plumes in Stuart where one plume migrated in a direction opposite to the apparent regional gradient. In Coral Springs analysis suggests a bifurcating plume migrating along two narrow zones. In Fort Pierce it was difficult to detect leachate because of mineralized irrigation water and fertilizer runoff from an adjacent citrus grove.

Partial F-tests with multiply imputed data in the linear regression framework via coefficient of determination.

PubMed

Chaurasia, Ashok; Harel, Ofer

2015-02-10

Tests for regression coefficients such as global, local, and partial F-tests are common in applied research. In the framework of multiple imputation, there are several papers addressing tests for regression coefficients. However, for simultaneous hypothesis testing, the existing methods are computationally intensive because they involve calculation with vectors and (inversion of) matrices. In this paper, we propose a simple method based on the scalar entity, coefficient of determination, to perform (global, local, and partial) F-tests with multiply imputed data. The proposed method is evaluated using simulated data and applied to suicide prevention data. Copyright © 2014 John Wiley & Sons, Ltd.

Electronically Tuned Local Oscillators for the NOEMA Interferometer

NASA Astrophysics Data System (ADS)

Mattiocco, Francois; Garnier, Olivier; Maier, Doris; Navarrini, Alessandro; Serres, Patrice

2016-03-01

We present an overview of the electronically tuned local oscillator (LO) system developed at the Institut de RadioAstronomie millimetrique (IRAM) for the superconductor-insulator-superconductor (SIS) receivers of the NOrthern Extended Millimeter Array interferometer (NOEMA). We modified the frequency bands and extended the bandwidths of the LO designs developed by the National Radio Astronomy Observatory (NRAO) for the Atacama Large Millimeter Array (ALMA) project to cover the four NOEMA LO frequency ranges 82-108.3 GHz (Band 1), 138.6-171.3 GHz (Band 2), 207.7-264.4 GHz (Band 3), and 283-365 GHz (Band 4). The NOEMA LO system employs commercially available MMICs and GaAs millimeter MMICs from NRAO which are micro-assembled into active multiplied chain (AMC) and power amplifier (PA) modules. We discuss the problem of the LO spurious harmonics and of the LO signal directly multiplied by the SIS mixers that add extra noise and lead to detections of unwanted spectral lines from higher order sidebands. A waveguide filter in the LO path is used to reduce the higher order harmonics level of the LO at the output of the final frequency multiplier, thus mitigating the undesired effects and improving the system noise temperature.

A robust algorithm for optimisation and customisation of fractal dimensions of time series modified by nonlinearly scaling their time derivatives: mathematical theory and practical applications.

PubMed

Fuss, Franz Konstantin

2013-01-01

Standard methods for computing the fractal dimensions of time series are usually tested with continuous nowhere differentiable functions, but not benchmarked with actual signals. Therefore they can produce opposite results in extreme signals. These methods also use different scaling methods, that is, different amplitude multipliers, which makes it difficult to compare fractal dimensions obtained from different methods. The purpose of this research was to develop an optimisation method that computes the fractal dimension of a normalised (dimensionless) and modified time series signal with a robust algorithm and a running average method, and that maximises the difference between two fractal dimensions, for example, a minimum and a maximum one. The signal is modified by transforming its amplitude by a multiplier, which has a non-linear effect on the signal's time derivative. The optimisation method identifies the optimal multiplier of the normalised amplitude for targeted decision making based on fractal dimensions. The optimisation method provides an additional filter effect and makes the fractal dimensions less noisy. The method is exemplified by, and explained with, different signals, such as human movement, EEG, and acoustic signals.

Submillimeter sources for radiometry using high power Indium Phosphide Gunn diode oscillators

NASA Technical Reports Server (NTRS)

Deo, Naresh C.

1990-01-01

A study aimed at developing high frequency millimeter wave and submillimeter wave local oscillator sources in the 60-600 GHz range was conducted. Sources involved both fundamental and harmonic-extraction type Indium Phosphide Gunn diode oscillators as well as varactor multipliers. In particular, a high power balanced-doubler using varactor diodes was developed for 166 GHz. It is capable of handling 100 mW input power, and typically produced 25 mW output power. A high frequency tripler operating at 500 GHz output frequency was also developed and cascaded with the balanced-doubler. A dual-diode InP Gunn diode combiner was used to pump this cascaded multiplier to produce on the order of 0.5 mW at 500 GHz. In addition, considerable development and characterization work on InP Gunn diode oscillators was carried out. Design data and operating characteristics were documented for a very wide range of oscillators. The reliability of InP devices was examined, and packaging techniques to enhance the performance were analyzed. A theoretical study of a new class of high power multipliers was conducted for future applications. The sources developed here find many commercial applications for radio astronomy and remote sensing.

A Robust Algorithm for Optimisation and Customisation of Fractal Dimensions of Time Series Modified by Nonlinearly Scaling Their Time Derivatives: Mathematical Theory and Practical Applications

PubMed Central

2013-01-01

Standard methods for computing the fractal dimensions of time series are usually tested with continuous nowhere differentiable functions, but not benchmarked with actual signals. Therefore they can produce opposite results in extreme signals. These methods also use different scaling methods, that is, different amplitude multipliers, which makes it difficult to compare fractal dimensions obtained from different methods. The purpose of this research was to develop an optimisation method that computes the fractal dimension of a normalised (dimensionless) and modified time series signal with a robust algorithm and a running average method, and that maximises the difference between two fractal dimensions, for example, a minimum and a maximum one. The signal is modified by transforming its amplitude by a multiplier, which has a non-linear effect on the signal's time derivative. The optimisation method identifies the optimal multiplier of the normalised amplitude for targeted decision making based on fractal dimensions. The optimisation method provides an additional filter effect and makes the fractal dimensions less noisy. The method is exemplified by, and explained with, different signals, such as human movement, EEG, and acoustic signals. PMID:24151522

Dual Brushless Resolver Rate Sensor

NASA Technical Reports Server (NTRS)

Howard, David E. (Inventor)

1997-01-01

A resolver rate sensor is disclosed in which dual brushless resolvers are mechanically coupled to the same output shaft. Diverse inputs are provided to each resolver by providing the first resolver with a DC input and the second resolver with an AC sinusoidal input. A trigonometric identity in which the sum of the squares of the sin and cosine components equal one is used to advantage in providing a sensor of increased accuracy. The first resolver may have a fixed or variable DC input to permit dynamic adjustment of resolver sensitivity thus permitting a wide range of coverage. In one embodiment of the invention the outputs of the first resolver are directly inputted into two separate multipliers and the outputs of the second resolver are inputted into the two separate multipliers, after being demodulated in a pair of demodulator circuits. The multiplied signals are then added in an adder circuit to provide a directional sensitive output. In another embodiment the outputs from the first resolver is modulated in separate modulator circuits and the output from the modulator circuits are used to excite the second resolver. The outputs from the second resolver are demodulated in separate demodulator circuit and added in an adder circuit to provide a direction sensitive rate output.

A Fluid Structure Algorithm with Lagrange Multipliers to Model Free Swimming

NASA Astrophysics Data System (ADS)

Sahin, Mehmet; Dilek, Ezgi

2017-11-01

A new monolithic approach is prosed to solve the fluid-structure interaction (FSI) problem with Lagrange multipliers in order to model free swimming/flying. In the present approach, the fluid domain is modeled by the incompressible Navier-Stokes equations and discretized using an Arbitrary Lagrangian-Eulerian (ALE) formulation based on the stable side-centered unstructured finite volume method. The solid domain is modeled by the constitutive laws for the nonlinear Saint Venant-Kirchhoff material and the classical Galerkin finite element method is used to discretize the governing equations in a Lagrangian frame. In order to impose the body motion/deformation, the distance between the constraint pair nodes is imposed using the Lagrange multipliers, which is independent from the frame of reference. The resulting algebraic linear equations are solved in a fully coupled manner using a dual approach (null space method). The present numerical algorithm is initially validated for the classical FSI benchmark problems and then applied to the free swimming of three linked ellipses. The authors are grateful for the use of the computing resources provided by the National Center for High Performance Computing (UYBHM) under Grant Number 10752009 and the computing facilities at TUBITAK-ULAKBIM, High Performance and Grid Computing Center.

Economic impact of milk production in the State of New Mexico.

PubMed

Cabrera, V E; Hagevoort, R; Solís, D; Kirksey, R; Diemer, J A

2008-05-01

The goal of this study was to quantify the economic role of dairy farming in New Mexico and to identify its linkages with allied industries in terms of income, value added, and employment impacts. An input-output model was used to estimate the direct, indirect, and induced impacts of the dairy farm industry on the economy of New Mexico. The results showed that in 2005, New Mexico's dairy farm industry had a total economic impact of $1.98 billion and accounted for 14,313 jobs. Therefore, dairy farming in New Mexico had an output multiplier (income) of 1.92, a labor income multiplier of $248 thousand/$ million of gross sales, and an employment multiplier of 13.91 jobs/$ million of gross sales. Furthermore, the New Mexico dairy farms accounted for 13.1% of the total agricultural outputs, 20.5% of the agricultural jobs, 1.5% of total state economic activity, and $80 million in tax revenue. With the exception of Lea, Eddy, and Bernalillo counties, which are diversified, the dairy farms accounted for more than two-thirds of the agricultural outputs and for more than two-fifths of the agricultural employment in counties where dairy farms are concentrated.

Host age modulates within-host parasite competition

PubMed Central

Izhar, Rony; Routtu, Jarkko; Ben-Ami, Frida

2015-01-01

In many host populations, one of the most striking differences among hosts is their age. While parasite prevalence differences in relation to host age are well known, little is known on how host age impacts ecological and evolutionary dynamics of diseases. Using two clones of the water flea Daphnia magna and two clones of its bacterial parasite Pasteuria ramosa, we examined how host age at exposure influences within-host parasite competition and virulence. We found that multiply-exposed hosts were more susceptible to infection and suffered higher mortality than singly-exposed hosts. Hosts oldest at exposure were least often infected and vice versa. Furthermore, we found that in young multiply-exposed hosts competition was weak, allowing coexistence and transmission of both parasite clones, whereas in older multiply-exposed hosts competitive exclusion was observed. Thus, age-dependent parasite exposure and host demography (age structure) could together play an important role in mediating parasite evolution. At the individual level, our results demonstrate a previously unnoticed interaction of the host's immune system with host age, suggesting that the specificity of immune function changes as hosts mature. Therefore, evolutionary models of parasite virulence might benefit from incorporating age-dependent epidemiological parameters. PMID:25994010

Now the Dark Electron Multiplier does Sense Direction of the Daemon Motion

NASA Astrophysics Data System (ADS)

Drobyshevski, E. M.; Drobyshevski, M. E.; Pikulin, V. A.

Detection of the September maximum in the primary near-Earth daemon flux at high (~ 60°) Northern latitudes by our setup with a plane horizontal scintillator is plagued by purely geometric factors; indeed, because of the Earth's rotation axis being tilted, the daemons catching up with the Earth in outer Near-Earth, Almost Circular Heliocentric Orbits (NEACHOs) strike the Earth along close-to-horizontal paths. Nevertheless, application of only two oppositely oriented, specially designed "dark electron multipliers" of the type TEU-167d (only their ø125-mm front disc is coated on the inside by a thick, ~ 0.5 μm Al layer, which permits such multipliers to detect primarily daemons flying inside them from the base to the disc) has made it possible for us to detect in one experiment, at a confidence level of >3σ, a flux of daemons captured from NEACHOs into Geocentric Earth-Surface-Crossing Orbits, as well as to record a decrease in the velocity of these objects from ~ 10 to ~ 7 km/s in a characteristic time of ~ 1 month resulting from their being slowed down in transits through the Earth's body.

Effects of cooking using multi-ply cookware on absorption of potassium and vitamins: a randomized double-blind placebo control study.

PubMed

Mori, Mari; Hamada, Atsumi; Mori, Hideki; Yamori, Yukio; Tsuda, Kinsuke

2012-08-01

This 2-week interventional study involved a randomized allocation of subjects into three groups: Group A (daily ingestion of 350 g vegetables cooked without water using multi-ply [multilayer-structured] cookware), Group B (daily ingestion of 350 g vegetables; ordinary cookware) and Group C (routine living). Before and after intervention, each subject underwent health examination with 24-h urine sampling. Blood vitamin C significantly increased after intervention from the baseline in Group A (P < 0.01) and Group B (P < 0.05). β-Carotene levels also increased significantly after intervention in Group A (P < 0.01) and Group B (P < 0.01). Oxidized low-density lipoprotein decreased significantly after intervention in Group A (P < 0.01). In Group A, 24-h urinary potassium excretion increased significantly (P < 0.01) and 24-h urinary sodium (Na)/K ratio improved significantly (P < 0.05) after intervention. In conclusion, a cooking method modification with multi-ply cookware improved absorption of nutrients from vegetables and enhanced effective utilization of the antioxidant potentials of vegetable nutrients.

Estimating the number of female sex workers in Côte d'Ivoire: results and lessons learned.

PubMed

Vuylsteke, Bea; Sika, Lazare; Semdé, Gisèle; Anoma, Camille; Kacou, Elise; Laga, Marie

2017-09-01

To report on the results of three size estimations of the populations of female sex workers (FSW) in five cities in Côte d'Ivoire and on operational lessons learned, which may be relevant for key population programmes in other parts of the world. We applied three methods: mapping and census, capture-recapture and service multiplier. All were applied between 2008 and 2009 in Abidjan, San Pedro, Bouaké, Yamoussoukro and Abengourou. Abidjan was the city with the highest number of FSW by far, with estimations between 7880 (census) and 13 714 (service multiplier). The estimations in San Pedro, Bouaké and Yamoussoukro were very similar, with figures ranging from 1160 (Yamoussoukro, census) to 1916 (San Pedro, capture-recapture). Important operational lessons were learned, including strategies for mapping, the importance of involving peer sex workers for implementing the capture-recapture and the identification of the right question for the multiplier method. Successful application of three methods to estimate the population size of FSW in five cities in Côte d'Ivoire enabled us to make recommendations for size estimations of key population in low-income countries. © 2017 John Wiley & Sons Ltd.

Modified Interior Distance Functions (Theory and Methods)

NASA Technical Reports Server (NTRS)

Polyak, Roman A.

1995-01-01

In this paper we introduced and developed the theory of Modified Interior Distance Functions (MIDF's). The MIDF is a Classical Lagrangian (CL) for a constrained optimization problem which is equivalent to the initial one and can be obtained from the latter by monotone transformation both the objective function and constraints. In contrast to the Interior Distance Functions (IDF's), which played a fundamental role in Interior Point Methods (IPM's), the MIDF's are defined on an extended feasible set and along with center, have two extra tools, which control the computational process: the barrier parameter and the vector of Lagrange multipliers. The extra tools allow to attach to the MEDF's very important properties of Augmented Lagrangeans. One can consider the MIDFs as Interior Augmented Lagrangeans. It makes MIDF's similar in spirit to Modified Barrier Functions (MBF's), although there is a fundamental difference between them both in theory and methods. Based on MIDF's theory, Modified Center Methods (MCM's) have been developed and analyzed. The MCM's find an unconstrained minimizer in primal space and update the Lagrange multipliers, while both the center and the barrier parameter can be fixed or updated at each step. The MCM's convergence was investigated, and their rate of convergence was estimated. The extension of the feasible set and the special role of the Lagrange multipliers allow to develop MCM's, which produce, in case of nondegenerate constrained optimization, a primal and dual sequences that converge to the primal-dual solutions with linear rate, even when both the center and the barrier parameter are fixed. Moreover, every Lagrange multipliers update shrinks the distance to the primal dual solution by a factor 0 less than gamma less than 1 which can be made as small as one wants by choosing a fixed interior point as a 'center' and a fixed but large enough barrier parameter. The numericai realization of MCM leads to the Newton MCM (NMCM). The approximation for the primal minimizer one finds by Newton Method followed by the Lagrange multipliers update. Due to the MCM convergence, when both the center and the barrier parameter are fixed, the condition of the MDF Hessism and the neighborhood of the primal ninimizer where Newton method is 'well' defined remains stable. It contributes to both the complexity and the numerical stability of the NMCM.

Analytical Energy Gradients for Excited-State Coupled-Cluster Methods

NASA Astrophysics Data System (ADS)

Wladyslawski, Mark; Nooijen, Marcel

The equation-of-motion coupled-cluster (EOM-CC) and similarity transformed equation-of-motion coupled-cluster (STEOM-CC) methods have been firmly established as accurate and routinely applicable extensions of single-reference coupled-cluster theory to describe electronically excited states. An overview of these methods is provided, with emphasis on the many-body similarity transform concept that is the key to a rationalization of their accuracy. The main topic of the paper is the derivation of analytical energy gradients for such non-variational electronic structure approaches, with an ultimate focus on obtaining their detailed algebraic working equations. A general theoretical framework using Lagrange's method of undetermined multipliers is presented, and the method is applied to formulate the EOM-CC and STEOM-CC gradients in abstract operator terms, following the previous work in [P.G. Szalay, Int. J. Quantum Chem. 55 (1995) 151] and [S.R. Gwaltney, R.J. Bartlett, M. Nooijen, J. Chem. Phys. 111 (1999) 58]. Moreover, the systematics of the Lagrange multiplier approach is suitable for automation by computer, enabling the derivation of the detailed derivative equations through a standardized and direct procedure. To this end, we have developed the SMART (Symbolic Manipulation and Regrouping of Tensors) package of automated symbolic algebra routines, written in the Mathematica programming language. The SMART toolkit provides the means to expand, differentiate, and simplify equations by manipulation of the detailed algebraic tensor expressions directly. The Lagrangian multiplier formulation establishes a uniform strategy to perform the automated derivation in a standardized manner: A Lagrange multiplier functional is constructed from the explicit algebraic equations that define the energy in the electronic method; the energy functional is then made fully variational with respect to all of its parameters, and the symbolic differentiations directly yield the explicit equations for the wavefunction amplitudes, the Lagrange multipliers, and the analytical gradient via the perturbation-independent generalized Hellmann-Feynman effective density matrix. This systematic automated derivation procedure is applied to obtain the detailed gradient equations for the excitation energy (EE-), double ionization potential (DIP-), and double electron affinity (DEA-) similarity transformed equation-of-motion coupled-cluster singles-and-doubles (STEOM-CCSD) methods. In addition, the derivatives of the closed-shell-reference excitation energy (EE-), ionization potential (IP-), and electron affinity (EA-) equation-of-motion coupled-cluster singles-and-doubles (EOM-CCSD) methods are derived. Furthermore, the perturbative EOM-PT and STEOM-PT gradients are obtained. The algebraic derivative expressions for these dozen methods are all derived here uniformly through the automated Lagrange multiplier process and are expressed compactly in a chain-rule/intermediate-density formulation, which facilitates a unified modular implementation of analytic energy gradients for CCSD/PT-based electronic methods. The working equations for these analytical gradients are presented in full detail, and their factorization and implementation into an efficient computer code are discussed.

Ku-band signal design study. [for space shuttle orbiter communication links

NASA Technical Reports Server (NTRS)

Lindsey, W. L.; Woo, K. T.

1977-01-01

The acquisition/tracking performance of a practical squaring loop in which the times two multiplier is mechanized as a limiter/multiplier combination is evaluated. This squaring approach serves to produce the absolute value of the arriving signal as opposed to the perfect square law action which is required in order to render acquisition and tracking performance equivalent to that of a Costas loop. The Ku-Band orbiter signal design for the forward link is assessed. Acquisition time results and acquisition and tracking thresholds are summarized. A tradeoff study which pertains to bit synchronization techniques for the high rate Ku-Band channel is included and an optimum selection is made based upon the appropriate design constraints.

Propagation of terahertz pulses in random media.

PubMed

Pearce, Jeremy; Jian, Zhongping; Mittleman, Daniel M

2004-02-15

We describe measurements of single-cycle terahertz pulse propagation in a random medium. The unique capabilities of terahertz time-domain spectroscopy permit the characterization of a multiply scattered field with unprecedented spatial and temporal resolution. With these results, we can develop a framework for understanding the statistics of broadband laser speckle. Also, the ability to extract information on the phase of the field opens up new possibilities for characterizing multiply scattered waves. We illustrate this with a simple example, which involves computing a time-windowed temporal correlation between fields measured at different spatial locations. This enables the identification of individual scattering events, and could lead to a new method for imaging in random media.

Beam shaping assembly of a D-T neutron source for BNCT and its dosimetry simulation in deeply-seated tumor

NASA Astrophysics Data System (ADS)

Faghihi, F.; Khalili, S.

2013-08-01

This article involves two aims for BNCT. First case includes a beam shaping assembly estimation for a D-T neutron source to find epi-thermal neutrons which are the goal in the BNCT. Second issue is the percent depth dose calculation in the adult Snyder head phantom. Monte-Carlo simulations and verification of a suggested beam shaping assembly (including internal neutron multiplier, moderator, filter, external neutron multiplier, collimator, and reflector dimensions) for thermalizing a D-T neutron source as well as increasing neutron flux are carried out and our results are given herein. Finally, we have simulated its corresponding doses for treatment planning of a deeply-seated tumor.

General covariance, topological quantum field theories and fractional statistics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gamboa, J.

1992-01-20

Topological quantum field theories and fractional statistics are both defined in multiply connected manifolds. The authors study the relationship between both theories in 2 + 1 dimensions and the authors show that, due to the multiply-connected character of the manifold, the propagator for any quantum (field) theory always contains a first order pole that can be identified with a physical excitation with fractional spin. The article starts by reviewing the definition of general covariance in the Hamiltonian formalism, the gauge-fixing problem and the quantization following the lines of Batalin, Fradkin and Vilkovisky. The BRST-BFV quantization is reviewed in order tomore » understand the topological approach proposed here.« less

Dynamics and Control of Constrained Multibody Systems modeled with Maggi's equation: Application to Differential Mobile Robots Part I

NASA Astrophysics Data System (ADS)

Amengonu, Yawo H.; Kakad, Yogendra P.

2014-07-01

Quasivelocity techniques such as Maggi's and Boltzmann-Hamel's equations eliminate Lagrange multipliers from the beginning as opposed to the Euler-Lagrange method where one has to solve for the n configuration variables and the multipliers as functions of time when there are m nonholonomic constraints. Maggi's equation produces n second-order differential equations of which (n-m) are derived using (n-m) independent quasivelocities and the time derivative of the m kinematic constraints which add the remaining m second order differential equations. This technique is applied to derive the dynamics of a differential mobile robot and a controller which takes into account these dynamics is developed.

Digital health and the challenge of health systems transformation.

PubMed

Alami, Hassane; Gagnon, Marie-Pierre; Fortin, Jean-Paul

2017-01-01

Information and communication technologies have transformed all sectors of society. The health sector is no exception to this trend. In light of "digital health", we see multiplying numbers of web platforms and mobile health applications, often brought by new unconventional players who produce and offer services in non-linear and non-hierarchal ways, this by multiplying access points to services for people. Some speak of a "uberization" of healthcare. New realities and challenges have emerged from this paradigm, which question the abilities of health systems to cope with new business and economic models, governance of data and regulation. Countries must provide adequate responses so that digital health, based increasingly on disruptive technologies, can benefit for all.

A 2 Thz Schottky Solid-State Heterodyne Receiver for Atmospheric Studies

NASA Technical Reports Server (NTRS)

Treuttel, Jeanne; Schlecht, Erich; Siles, Jose; Lee, Choonsup; Lin, Robert; Thomas, Bertrand; Gonzalez-Olvero, David; Yee, Jeng-Hwa; Wu, Dong; Mehdi, Imran

2016-01-01

Obtaining temperature, pressure, and composition profiles along with wind velocities in the Earth's thermosphere/ionosphere system is a key NASA goal for understanding our planet. We report on the status of a technology development effort to build an all-solid-state heterodyne receiver at 2.06 terahertz that will allow the measurement of the 2.06 terahertz [OI] line for altitudes greater than 100 kilometers. The receiver front end features low-parasitic Schottky diode mixer chips that are driven by a local oscillator (LO) source using Schottky diode based multipliers. The multiplier chain consists of a 38 gigahertz oscillator followed by a set of three cascaded triplers at 114 gigahertz, 343 gigahertz and 1.03 terahertz.

Fast ℓ1-regularized space-time adaptive processing using alternating direction method of multipliers

NASA Astrophysics Data System (ADS)

Qin, Lilong; Wu, Manqing; Wang, Xuan; Dong, Zhen

2017-04-01

Motivated by the sparsity of filter coefficients in full-dimension space-time adaptive processing (STAP) algorithms, this paper proposes a fast ℓ1-regularized STAP algorithm based on the alternating direction method of multipliers to accelerate the convergence and reduce the calculations. The proposed algorithm uses a splitting variable to obtain an equivalent optimization formulation, which is addressed with an augmented Lagrangian method. Using the alternating recursive algorithm, the method can rapidly result in a low minimum mean-square error without a large number of calculations. Through theoretical analysis and experimental verification, we demonstrate that the proposed algorithm provides a better output signal-to-clutter-noise ratio performance than other algorithms.

Gas electron multiplier (GEM) foil test, repair and effective gain calculation

NASA Astrophysics Data System (ADS)

Tahir, Muhammad; Zubair, Muhammad; Khan, Tufail A.; Khan, Ashfaq; Malook, Asad

2018-06-01

The focus of my research is based on the gas electron multiplier (GEM) foil test, repairing and effective gain calculation of GEM detector. During my research work define procedure of GEM foil testing short-circuit, detection short-circuits in the foil. Study different ways to remove the short circuits in the foils. Set and define the GEM foil testing procedures in the open air, and with nitrogen gas. Measure the leakage current of the foil and applying different voltages with specified step size. Define the Quality Control (QC) tests and different components of GEM detectors before assembly. Calculate the effective gain of GEM detectors using 109Cd and 55Fe radioactive source.

Factors Which Influence Synergism by Neomycin and Oxytetracycline

PubMed Central

Williams, B. J.

1971-01-01

Six strains of enteropathogenic gram-negative bacteria were tested for susceptibility to neomycin or oxytetracycline alone and combined in fixed ratios. The minimal inhibitory concentration for the combination was less than one-half of that expected if the antibiotic activities were simply additive. Neomycin alone was more effective against bacteria multiplying in the presence of abundant oxygen, whereas oxytetracycline alone was more effective against bacteria multiplying in relatively anaerobic environments; when combined, the antibiotics complemented each other by their opposing optima for activity. Oxygen concentration, pH, and neomycin activity are related, and the depression of acid production by oxytetracycline is believed to be partially responsible for the synergistic activity of this pair of antibiotics. Images PMID:4930276

Channel electron multiplier compatibility with Viton and Apiezon-L vacuum grease

NASA Astrophysics Data System (ADS)

McComas, D. J.; Baldonado, J. R.; Bame, S. J.; Barraclough, B. L.

1987-12-01

Clean Viton and Viton coated with Apiezon-L vacuum grease were tested for their noncontaminating compatibility with channel electron multipliers (CEMs). The test setup and procedure were the same as those used previously in conjunction with CEM compatibility tests of certain epoxies, solder, and fluorocarbon polymer materials useful for construction of spaceflight sensors. While some CEM gain degradation was noted during exposure to Viton and Apiezon-L, the present tests indicate that, at least over instrument lifetimes of about 2 x 10 to the 12th counts, these materials should be suitable for (1) preflight space sensor testing systems, (2) hermetic seals for CEM-based space sensors, and (3) terrestrial CEM-based instrumentation.

Linked population and economic models: some methodological issues in forecasting, analysis, and policy optimization.

PubMed

Madden, M; Batey Pwj

1983-05-01

Some problems associated with demographic-economic forecasting include finding models appropriate for a declining economy with unemployment, using a multiregional approach in an interregional model, finding a way to show differential consumption while endogenizing unemployment, and avoiding unemployment inconsistencies. The solution to these problems involves the construction of an activity-commodity framework, locating it within a group of forecasting models, and indicating possible ratios towards dynamization of the framework. The authors demonstrate the range of impact multipliers that can be derived from the framework and show how these multipliers relate to Leontief input-output multipliers. It is shown that desired population distribution may be obtained by selecting instruments from the economic sphere to produce, through the constraints vector of an activity-commodity framework, targets selected from demographic activities. The next step in this process, empirical exploitation, was carried out by the authors in the United Kingdom, linking an input-output model with a wide selection of demographic and demographic-economic variables. The generally tenuous control which government has over any variables in systems of this type, especially in market economies, makes application in the policy field of the optimization approach a partly conjectural exercise, although the analytic capacity of the approach can provide clear indications of policy directions.

Apparatus for measuring surface movement of an object that is subjected to external vibrations

DOEpatents

Kotidis, Petros A.; Woodroffe, Jaime A.; Rostler, Peter S.

1997-01-01

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading.

Furnace control apparatus using polarizing interferometer

DOEpatents

Schultz, Thomas J.; Kotidis, Petros A.; Woodroffe, Jaime A.; Rostler, Peter S.

1995-01-01

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading.

Polarizing optical interferometer having a dual use optical element

DOEpatents

Kotidis, P.A.; Woodroffe, J.A.; Rostler, P.S.

1995-04-04

A system for nondestructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading. 38 figures.

Process control system using polarizing interferometer

DOEpatents

Schultz, T.J.; Kotidis, P.A.; Woodroffe, J.A.; Rostler, P.S.

1994-02-15

A system for nondestructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading. 38 figures.

Polarizing optical interferometer having a dual use optical element

DOEpatents

Kotidis, Petros A.; Woodroffe, Jaime A.; Rostler, Peter S.

1995-01-01

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading.

Process control system using polarizing interferometer

DOEpatents

Schultz, Thomas J.; Kotidis, Petros A.; Woodroffe, Jaime A.; Rostler, Peter S.

1994-01-01

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading.

Furnace control apparatus using polarizing interferometer

DOEpatents

Schultz, T.J.; Kotidis, P.A.; Woodroffe, J.A.; Rostler, P.S.

1995-03-28

A system for nondestructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading. 38 figures.

Method and apparatus for measuring surface movement of a solid object that is subjected to external vibrations

DOEpatents

Schultz, Thomas J.; Kotidis, Petros A.; Woodroffe, Jaime A.; Rostler, Peter S.

1995-01-01

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading.

Method and apparatus for measuring surface movement of an object using a polarizing interfeometer

DOEpatents

Schultz, Thomas J.; Kotidis, Petros A.; Woodroffe, Jaime A.; Rostler, Peter S.

1995-01-01

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading.

[Communication training MultiTANDEMplus – A contribution to improve communication between professional caregivers and physicians].

PubMed

Meyer-Kühling, Inga; Wendelstein, Britta; Pantel, Johannes; Specht-Leible, Norbert; Zenthöfer, Andreas; Schröder, Johannes

2015-10-01

Failures of communication between professional caregivers and physicians affect the quality of supply of nursing home residents. As part of a model project it was aimed to develop a training for caregivers to improve communication and promote cooperation with physicians. For the needs assessment as a basis to develop the training 56 professional caregivers and 40 physicians engaged in nursing home care answered questionnaires regarding their cooperation. Based on these results a module for communication between professional caregivers and physicians was developed and adapted the TANDEM communication training for caregivers by Haberstroh and Pantel (2011). 25 professional caregivers in leading positions have been trained as multipliers in order to provide their colleagues the communication training with the additional element (TANDEMplus). TANDEMplus was evaluated in forms of reflection rounds and feedback questionnaires. 254 professional caregivers, housekeeping staff and daytime companions participated in a complete TANDEMplus training by the multipliers until July 2014. The implementation of their developed communication strategies into practice was experienced positively by the participants. The module “communication with physicians” is relevant for professional caregivers to raise awareness of their own competence and facilitate a structured information exchange at eye level. The training of multipliers was executed in order to ensure transfer effects and sustainability.

Method and apparatus for measuring surface movement of an object using a polarizing interferometer

DOEpatents

Schultz, T.J.; Kotidis, P.A.; Woodroffe, J.A.; Rostler, P.S.

1995-05-09

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading. 38 figs.

Method and apparatus for measuring surface movement of a solid object that is subjected to external vibrations

DOEpatents

Schultz, T.J.; Kotidis, P.A.; Woodroffe, J.A.; Rostler, P.S.

1995-04-25

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading. 38 figs.

Apparatus for measuring surface movement of an object that is subjected to external vibrations

DOEpatents

Kotidis, P.A.; Woodroffe, J.A.; Rostler, P.S.

1997-04-22

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading. 38 figs.

Efficient optical nonlinear Langmuir-Blodgett films: roles of matrix molecules

NASA Astrophysics Data System (ADS)

Ma, Shihong; Lu, Xingze; Liu, Liying; Han, Kui; Wang, Wencheng; Zhang, Zhi-Ming

1996-10-01

A novel bifat-chain amphiphilic molecule nitrogencrown (NC) was adopted as an inert material for fabrication of optical nonlinear Langmuir-Blodgett (LB) multilayers. Structural improvement in the Z-type mixed fullerene derivative (C60-Be)/NC LB multilayers samples was realized by insertion of the C60-Be molecules between two hydrophobic chains of the NC molecules. The relatively large third-order susceptibility (chi) (3)xxxx(- 3(omega) ;(omega) ,(omega) ,(omega) ) equals 2.9 multiplied by 10-19 M2V-2 (or 2.1 multiplied by 10-11 esu) was deduced by measuring third harmonic generation (THG) from the C60-Be samples. The second harmonic generation (SHG) intensity increased quadratically with the bilayer number (up to 116 bilayers) in Y-type hemicyanine (HEM)/NC interleaving LB multilayers due to improvement of the structural properties by insertion of the long hydrophobic tail of HEM molecules between two chains of NC molecules. The second-order susceptibility (chi) (2)zxx(-2(omega) ;(omega) ,(omega) ) equals 18 pM V-1 (or 4.35 multiplied by 10-8 esu) was obtained by measuring SHG from the HEM samples. The NC molecule has attractive features as a matrix material in fabrications of LB multilayers made from optically nonlinear materials with hydrophobic long tails or ball-like molecules.

Performance and Reliability Analysis of Water Distribution Systems under Cascading Failures and the Identification of Crucial Pipes

PubMed Central

Shuang, Qing; Zhang, Mingyuan; Yuan, Yongbo

2014-01-01

As a mean of supplying water, Water distribution system (WDS) is one of the most important complex infrastructures. The stability and reliability are critical for urban activities. WDSs can be characterized by networks of multiple nodes (e.g. reservoirs and junctions) and interconnected by physical links (e.g. pipes). Instead of analyzing highest failure rate or highest betweenness, reliability of WDS is evaluated by introducing hydraulic analysis and cascading failures (conductive failure pattern) from complex network. The crucial pipes are identified eventually. The proposed methodology is illustrated by an example. The results show that the demand multiplier has a great influence on the peak of reliability and the persistent time of the cascading failures in its propagation in WDS. The time period when the system has the highest reliability is when the demand multiplier is less than 1. There is a threshold of tolerance parameter exists. When the tolerance parameter is less than the threshold, the time period with the highest system reliability does not meet minimum value of demand multiplier. The results indicate that the system reliability should be evaluated with the properties of WDS and the characteristics of cascading failures, so as to improve its ability of resisting disasters. PMID:24551102

Host age modulates within-host parasite competition.

PubMed

Izhar, Rony; Routtu, Jarkko; Ben-Ami, Frida

2015-05-01

In many host populations, one of the most striking differences among hosts is their age. While parasite prevalence differences in relation to host age are well known, little is known on how host age impacts ecological and evolutionary dynamics of diseases. Using two clones of the water flea Daphnia magna and two clones of its bacterial parasite Pasteuria ramosa, we examined how host age at exposure influences within-host parasite competition and virulence. We found that multiply-exposed hosts were more susceptible to infection and suffered higher mortality than singly-exposed hosts. Hosts oldest at exposure were least often infected and vice versa. Furthermore, we found that in young multiply-exposed hosts competition was weak, allowing coexistence and transmission of both parasite clones, whereas in older multiply-exposed hosts competitive exclusion was observed. Thus, age-dependent parasite exposure and host demography (age structure) could together play an important role in mediating parasite evolution. At the individual level, our results demonstrate a previously unnoticed interaction of the host's immune system with host age, suggesting that the specificity of immune function changes as hosts mature. Therefore, evolutionary models of parasite virulence might benefit from incorporating age-dependent epidemiological parameters. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Electronic optimization for an energy harvesting system based on magnetoelectric Metglas/poly(vinylidene fluoride)/Metglas composites

NASA Astrophysics Data System (ADS)

Reis, S.; Silva, M. P.; Castro, N.; Correia, V.; Rocha, J. G.; Martins, P.; Lasheras, A.; Gutierrez, J.; Lanceros-Mendez, S.

2016-08-01

Harvesting magnetic energy from the environment is becoming increasingly attractive for being a renewable and inexhaustible power source, ubiquitous and accessible in remote locations. In particular, magnetic harvesting with polymer-based magnetoelectric (ME) materials meet the industry demands of being flexible, showing large area potential, lightweight and biocompatibility. In order to get the best energy harvesting process, the extraction circuit needs to be optimized in order to be useful for powering devices. This paper discusses the design and performance of five interface circuits, a full-wave bridge rectifier, two Cockcroft-Walton voltage multipliers (with 1 and 2 stages) and two Dickson voltage multipliers (with 2 and 3 stages), for the energy harvesting from a Fe61.6Co16.4Si10.8B11.2 (Metglas)/polyvinylidene fluoride/Metglas ME composite. Maximum power and power density values of 12 μW and 0.9 mW cm-3 were obtained, respectively, with the Dickson voltage multiplier with two stages, for a load resistance of 180 kΩ, at 7 Oe DC magnetic field and a 54.5 kHz resonance frequency. Such performance is useful for microdevice applications in hard-to-reach locations and for traditional devices such as electric windows, door locking, and tire pressure monitoring.

Estimating the Fiscal Effects of Public Pharmaceutical Expenditure Reduction in Greece.

PubMed

Souliotis, Kyriakos; Papageorgiou, Manto; Politi, Anastasia; Frangos, Nikolaos; Tountas, Yiannis

2015-01-01

The purpose of the present study is to estimate the impact of pharmaceutical spending reduction on public revenue, based on data from the national health accounts as well as on reports of Greece's organizations. The methodology of the analysis is structured in two basic parts. The first part presents the urgency for rapid cutbacks on public pharmaceutical costs due to the financial crisis and provides a conceptual framework for the contribution of the Greek pharmaceutical branch to the country's economy. In the second part, we perform a quantitative analysis for the estimation of multiplier effects of public pharmaceutical expenditure reduction on main revenue sources, such as taxes and social contributions. We also fit projection models with multipliers as regressands for the evaluation of the efficiency of the particular fiscal measure in the short run. According to the results, nearly half of the gains from the measure's application is offset by financially equivalent decreases in the government's revenue, i.e., losses in tax revenues and social security contributions alone, not considering any other direct or indirect costs. The findings of multipliers' high value and increasing short-term trend imply the measure's inefficiency henceforward and signal the risk of vicious circles that will provoke the economy's deprivation of useful resources.

Forced monogamy in a multiply mating species does not impede colonisation success.

PubMed

Deacon, Amy E; Barbosa, Miguel; Magurran, Anne E

2014-06-12

The guppy (Poecilia reticulata) is a successful invasive species. It is also a species that mates multiply; previous studies have demonstrated that this strategy carries fitness benefits. Guppies are routinely introduced to tanks and troughs in regions outside their native range for mosquito-control purposes, and often spread beyond these initial confines into natural water bodies with negative ecological consequences. Here, using a mesocosm set up that resembles the containers into which single guppies are typically introduced for mosquito control, we ask whether singly-mated females are at a disadvantage, relative to multiply-mated females, when it comes to founding a population. Treatments were monitored for one year. A key finding was that mating history did not predict establishment success, which was 88% in both treatments. Furthermore, analysis of behavioural traits revealed that the descendants of singly-mated females retained antipredator behaviours, and that adult males showed no decrease in courtship vigour. Also, we detected no differences in behavioural variability between treatments. These results suggest that even when denied the option of multiple mating, singly-mated female guppies can produce viable populations, at least at the founder stage. This may prove to be a critical advantage in typical introduction scenarios where few individuals are released into enclosed water bodies before finding their way into natural ecosystems.

A correction factor for estimating statewide agricultural injuries from ambulance reports.

PubMed

Scott, Erika E; Earle-Richardson, Giulia; Krupa, Nicole; Jenkins, Paul

2011-10-01

Agriculture ranks as one of the most hazardous industries in the nation. Agricultural injury surveillance is critical to identifying and reducing major injury hazards. Currently, there is no comprehensive system of identifying and characterizing fatal and serious non-fatal agricultural injuries. Researchers sought to calculate a multiplier for estimating the number of agricultural injury cases based on the number of times the farm box indicator was checked on the ambulance report. Farm injuries from 2007 that used ambulance transport were ascertained for 10 New York counties using two methods: (1) ambulance reports including hand-entered free text; and (2) community surveillance. The resulting multiplier that was developed from contrasting these two methods was then applied to the statewide Emergency Medical Services database to estimate the total number of agricultural injuries for New York state. There were 25,735 unique ambulance runs due to injuries in the 10 counties in 2007. Among these, the farm box was checked a total of 90 times. Of these 90, 63 (70%) were determined to be agricultural. Among injury runs where the farm box was not checked, an additional 59 cases were identified from the free text. Among these 122 cases (63 + 59), four were duplicates. Twenty-four additional unique cases were identified from the community surveillance for a total of 142. This yielded a multiplier of 142/90 = 1.578 for estimating all agricultural injuries from the farm box indicator. Sensitivity and specificity of the ambulance report method were 53.4% and 99.9%, respectively. This method provides a cost-effective way to estimate the total number of agricultural injuries for the state. However, it would not eliminate the more labor intensive methods that are required to identify of the actual individual case records. Incorporating an independent source of case ascertainment (community surveillance) increased the multiplier by 17%. Copyright © 2011 Elsevier Inc. All rights reserved.

Sample Size Calculations for Population Size Estimation Studies Using Multiplier Methods With Respondent-Driven Sampling Surveys.

PubMed

Fearon, Elizabeth; Chabata, Sungai T; Thompson, Jennifer A; Cowan, Frances M; Hargreaves, James R

2017-09-14

While guidance exists for obtaining population size estimates using multiplier methods with respondent-driven sampling surveys, we lack specific guidance for making sample size decisions. To guide the design of multiplier method population size estimation studies using respondent-driven sampling surveys to reduce the random error around the estimate obtained. The population size estimate is obtained by dividing the number of individuals receiving a service or the number of unique objects distributed (M) by the proportion of individuals in a representative survey who report receipt of the service or object (P). We have developed an approach to sample size calculation, interpreting methods to estimate the variance around estimates obtained using multiplier methods in conjunction with research into design effects and respondent-driven sampling. We describe an application to estimate the number of female sex workers in Harare, Zimbabwe. There is high variance in estimates. Random error around the size estimate reflects uncertainty from M and P, particularly when the estimate of P in the respondent-driven sampling survey is low. As expected, sample size requirements are higher when the design effect of the survey is assumed to be greater. We suggest a method for investigating the effects of sample size on the precision of a population size estimate obtained using multipler methods and respondent-driven sampling. Uncertainty in the size estimate is high, particularly when P is small, so balancing against other potential sources of bias, we advise researchers to consider longer service attendance reference periods and to distribute more unique objects, which is likely to result in a higher estimate of P in the respondent-driven sampling survey. ©Elizabeth Fearon, Sungai T Chabata, Jennifer A Thompson, Frances M Cowan, James R Hargreaves. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 14.09.2017.

Bacillus subtilis Swarmer Cells Lead the Swarm, Multiply, and Generate a Trail of Quiescent Descendants.

PubMed

Hamouche, Lina; Laalami, Soumaya; Daerr, Adrian; Song, Solène; Holland, I Barry; Séror, Simone J; Hamze, Kassem; Putzer, Harald

2017-02-07

Bacteria adopt social behavior to expand into new territory, led by specialized swarmers, before forming a biofilm. Such mass migration of Bacillus subtilis on a synthetic medium produces hyperbranching dendrites that transiently (equivalent to 4 to 5 generations of growth) maintain a cellular monolayer over long distances, greatly facilitating single-cell gene expression analysis. Paradoxically, while cells in the dendrites (nonswarmers) might be expected to grow exponentially, the rate of swarm expansion is constant, suggesting that some cells are not multiplying. Little attention has been paid to which cells in a swarm are actually multiplying and contributing to the overall biomass. Here, we show in situ that DNA replication, protein translation and peptidoglycan synthesis are primarily restricted to the swarmer cells at dendrite tips. Thus, these specialized cells not only lead the population forward but are apparently the source of all cells in the stems of early dendrites. We developed a simple mathematical model that supports this conclusion. Swarming motility enables rapid coordinated surface translocation of a microbial community, preceding the formation of a biofilm. This movement occurs in thin films and involves specialized swarmer cells localized to a narrow zone at the extreme swarm edge. In the B. subtilis system, using a synthetic medium, the swarm front remains as a cellular monolayer for up to 1.5 cm. Swarmers display high-velocity whirls and vortexing and are often assumed to drive community expansion at the expense of cell growth. Surprisingly, little attention has been paid to which cells in a swarm are actually growing and contributing to the overall biomass. Here, we show that swarmers not only lead the population forward but continue to multiply as a source of all cells in the community. We present a model that explains how exponential growth of only a few cells is compatible with the linear expansion rate of the swarm. Copyright © 2017 Hamouche et al.

The effects of acute administration of Chinese aphrodisiacs sold in Blantyre City on sperm characteristics and fertility profile in guinea pigs.

PubMed

Lampiao, F; Matambo, E; Banda, A

2013-09-01

Chinese aphrodisiacs have become popular remedy for sexual dysfunction and improvement of libido in men in Malawi. However, selling of these drugs seems not to be well regulated. Probably the aphrodisiacs that are currently on the market have unknown efficacy, potency and safety profiles. The aim of this study was to assess the efficacy of imported Chinese aphrodisiacs using guinea pigs as a model. Two types of drugs were purchased from vendors in Blantyre City. Tonic tea, which was purported to improve erectile function and libido, and sperm multiplier tablets which were claimed to increase the sperm count. The tonic tea was prepared by soaking one tea bag in 100ml boiling water. The tea was cooled and administered to eight male experimental animals in varying doses. Each animal was introduced into a separate cage with a female guinea pig. Sexual behaviour such as mounting, sniffing behind the female were observed and recorded. Each sperm multiplier tablet was dissolved in distilled water and administered to the experimental animals in the morning and evening for seven days. At the end of the treatment, the experimental and control animals were sacrificed, their semen collected and analysed sperm motility, concentration and morphology. For the tonic tea, there were no statistical differences between the experimental and the control animals in terms of the number of mountings and sniffing behind the female. The sperm multiplier drug showed statistically significant differences between the experimental and the control animals in terms of the sperm motility (78.24 ± 1.35 vs. 86.54 ± 1.88, p< 0.05), and concentration (54.28 ± 1.24 vs. 67.59 ± 2.12, p<0.05). The tonic tea did not show any efficacy in improving erection and libido. The sperm multiplier tablets, purported to increase sperm production, significantly increased the sperm motility, sperm concentration in the treated animals.

The Search for Lensed Supernovae

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2017-01-01

Type Ia supernovae that have multiple images due to gravitational lensing can provide us with a wealth of information both about the supernovae themselves and about our surrounding universe. But how can we find these rare explosions?Clues from Multiple ImagesWhen light from a distant object passes by a massive foreground galaxy, the galaxys strong gravitational pull can bend the light, distorting our view of the backgroundobject. In severe cases, this process can cause multiple images of the distant object to appear in the foreground lensing galaxy.An illustration of gravitational lensing. Light from the distant supernova is bent as it passes through a giant elliptical galaxy in the foreground, causing multiple images of the supernova to appear to be hosted by the elliptical galaxy. [Adapted from image by NASA/ESA/A. Feild (STScI)]Observations of multiply-imaged Type Ia supernovae (explosions that occur when white dwarfs in binary systems exceed their maximum allowed mass) could answer a number of astronomical questions. Because Type Ia supernovae are standard candles, distant, lensed Type Ia supernovae can be used to extend the Hubble diagram to high redshifts. Furthermore, the lensing time delays from the multiply-imaged explosion can provide high-precision constraints on cosmological parameters.The catch? So far, weve only found one multiply-imaged Type Ia supernova: iPTF16geu, discovered late last year. Were going to need a lot more of them to develop a useful sample! So how do we identify themutiply-imaged Type Ias among the many billions of fleeting events discovered in current and future surveys of transients?Searching for AnomaliesAbsolute magnitudes for Type Ia supernovae in elliptical galaxies. None are expected to be above -20 in the B band, so if we calculate a magnitude for a Type Ia supernova thats larger than this, its probably not hosted by the galaxy we think it is! [Goldstein Nugent 2017]Two scientists from University of California, Berkeley and Lawrence Berkeley National Laboratory have a plan. In a recent publication, Daniel Goldstein and Peter Nugent propose the following clever procedure to apply to data from transient surveys:From the data, select only the supernova candidates that appear to be hosted by quiescent elliptical galaxies.Use the host galaxies photometric redshifts to calculate absolute magnitudes for the supernovae in this sample.Select from this only the supernovae above the maximum absolute magnitude expected for Type Ia supernovae.Supernovae selected in this way are likely tricking us: their apparent hosts are probably not their hosts at all! Instead, the supernova is likely behind the galaxy, and the galaxy is just lensing its light. Using this strategy therefore allows us to select supernova candidates that are most likely to be distant, gravitationally lensed Type Ia supernovae.Redshift distribution of the multiply-imaged Type Ia supernovae the authors estimate will be detectable by ZTF and LSST in their respective 3- and 10-year survey durations. [Goldstein Nugent 2017]A convenient aspect of Goldstein and Nugents technique is that we dont need to be able to resolve the lensed multiple images for discovery. This is useful, because ground-based optical surveys dont have the resolution to see the separate images yet theyll still be useful for discovering multiply-imaged supernovae.Future ProspectsHow useful? Goldstein and Nugent use Monte Carlo simulations to estimate how many multiply-imaged Type Ia supernovae will be discoverable with future survey projects. They find that theZwicky Transient Facility (ZTF), which will begin operating this year, should be able to find up to 10 using this technique in a 3-year search. The Large Synoptic Survey Telescope (LSST), which should start operating in 2022, will be able to find around 500 multiply-imaged Type Ia supernovae in a 10-year survey.CitationDaniel A. Goldstein and Peter E. Nugent 2017 ApJL 834 L5. doi:10.3847/2041-8213/834/1/L5

14 CFR 23.301 - Loads.

Code of Federal Regulations, 2010 CFR

2010-01-01

... load would significantly change the distribution of external or internal loads, this redistribution...) and ultimate loads (limit loads multiplied by prescribed factors of safety). Unless otherwise provided...

Comments on "The multisynapse neural network and its application to fuzzy clustering".

PubMed

Yu, Jian; Hao, Pengwei

2005-05-01

In the above-mentioned paper, Wei and Fahn proposed a neural architecture, the multisynapse neural network, to solve constrained optimization problems including high-order, logarithmic, and sinusoidal forms, etc. As one of its main applications, a fuzzy bidirectional associative clustering network (FBACN) was proposed for fuzzy-partition clustering according to the objective-functional method. The connection between the objective-functional-based fuzzy c-partition algorithms and FBACN is the Lagrange multiplier approach. Unfortunately, the Lagrange multiplier approach was incorrectly applied so that FBACN does not equivalently minimize its corresponding constrained objective-function. Additionally, Wei and Fahn adopted traditional definition of fuzzy c-partition, which is not satisfied by FBACN. Therefore, FBACN can not solve constrained optimization problems, either.

Experimental Investigation of Local Oscillator Chains with GaAs Planar Diodes at Cryogenic Temperatures

NASA Technical Reports Server (NTRS)

Maestrini, A.; Pukala, D.; Schlecht, E.; Mehdi, I.; Erickson, N.

2001-01-01

This paper will describe a robust test-bed that has been built to measure multiplier performance over a wide range of temperatures and frequencies. In a 182-212 GRz designed balanced doubler the peak efficiency at 201 GHz improves from 22% to 28% upon cooling from 300 K to 120 K. This stage is then used to pump a 362-424 GRz balanced planar doubler. The peak chain efficiency increases from 3.4% to 6% when the two cascaded doublers are cooled from 300 K to 120 K. This enables the production of 10 mW of peak output power at 377 GHz, which ought to be sufficient for driving the next stage multiplier.

Lagrange multiplier for perishable inventory model considering warehouse capacity planning

NASA Astrophysics Data System (ADS)

Amran, Tiena Gustina; Fatima, Zenny

2017-06-01

This paper presented Lagrange Muktiplier approach for solving perishable raw material inventory planning considering warehouse capacity. A food company faced an issue of managing perishable raw materials and marinades which have limited shelf life. Another constraint to be considered was the capacity of the warehouse. Therefore, an inventory model considering shelf life and raw material warehouse capacity are needed in order to minimize the company's inventory cost. The inventory model implemented in this study was the adapted economic order quantity (EOQ) model which is optimized using Lagrange multiplier. The model and solution approach were applied to solve a case industry in a food manufacturer. The result showed that the total inventory cost decreased 2.42% after applying the proposed approach.

Development of a Novel Two Dimensional Surface Plasmon Resonance Sensor Using Multiplied Beam Splitting Optics

PubMed Central

Hemmi, Akihide; Mizumura, Ryosuke; Kawanishi, Ryuta; Nakajima, Hizuru; Zeng, Hulie; Uchiyama, Katsumi; Kaneki, Noriaki; Imato, Toshihiko

2013-01-01

A novel two dimensional surface plasmon resonance (SPR) sensor system with a multi-point sensing region is described. The use of multiplied beam splitting optics, as a core technology, permitted multi-point sensing to be achieved. This system was capable of simultaneously measuring nine sensing points. Calibration curves for sucrose obtained on nine sensing points were linear in the range of 0–10% with a correlation factor of 0.996–0.998 with a relative standard deviation of 0.090–4.0%. The detection limits defined as S/N = 3 were 1.98 × 10−6–3.91 × 10−5 RIU. This sensitivity is comparable to that of conventional SPR sensors. PMID:23299626

[Treatment management of a multiply injured patient with HIV infection].

PubMed

Mand, C; Giannadakis, K; Schnabel, M; Stiletto, R

2007-11-01

In orthopaedic surgery and emergency medicine, patients of the age groups with a HIV risk represent the largest part of the entire population. As necessary steps have to be taken immediately at the scene of an accident and in the emergency room, contact with HIV-positive blood is often unavoidable, so that there is an increased risk of transmission for doctors and personnel. Due to the immunological state, the HIV patient is exposed to considerable post-operative complications such as wound infection, pneumonia and even sepsis. With the case of a 35-year-old HIV-positive patient who was multiply injured in a traffic accident, we want to present an interesting example of the problems that occur in the treatment of this patient group.

The structure of small, vapor-deposited particles. II - Experimental study of particles with hexagonal profile

NASA Technical Reports Server (NTRS)

Yacaman, M. J.; Heinemann, K.; Yang, C. Y.; Poppa, H.

1979-01-01

'Multiply-twinned' gold particles with hexagonal bright field TEM profile were determined to be icosahedra composed of 20 identical and twin-related tetrahedral building units that do not have an fcc structure. The crystal structure of these slightly deformed tetrahedra is rhombohedral. Experimental evidence supporting this particle model was obtained by selected-zone dark field and weak beam dark field electron microscopy. In conjunction with the results of part I, it has been concluded that multiply-twinned gold particles of pentagonal or hexagonal profile that are found during the early stages of the vapor deposition growth process on alkali halide surfaces do not have an fcc crystal structure, which is in obvious contrast to the structure of bulk gold.

Digital health and the challenge of health systems transformation

PubMed Central

Gagnon, Marie-Pierre; Fortin, Jean-Paul

2017-01-01

Information and communication technologies have transformed all sectors of society. The health sector is no exception to this trend. In light of “digital health”, we see multiplying numbers of web platforms and mobile health applications, often brought by new unconventional players who produce and offer services in non-linear and non-hierarchal ways, this by multiplying access points to services for people. Some speak of a “uberization” of healthcare. New realities and challenges have emerged from this paradigm, which question the abilities of health systems to cope with new business and economic models, governance of data and regulation. Countries must provide adequate responses so that digital health, based increasingly on disruptive technologies, can benefit for all. PMID:28894741

First results of performance tests of the newly designed Vacuum Silicon Photo Multiplier Tube (VSiPMT).

NASA Astrophysics Data System (ADS)

de Asmundis, R.; Barbarino, G.; Barbato, F. C. T.; Campajola, L.; De Rosa, G.; Fiorillo, G.; Migliozzi, P.; Mollo, C. M.; Rossi, B.; Vivolo, D.

2014-04-01

We invented (2007) the VSiPMT, a novel, high-gain, photo detector device and we publically proposed this idea in an International Conference for the first time at the 11th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD08) in Siena, triggering deep discussions on the feasibility of the device itself and on the convenience of such a solution. After several years spent in designing, evaluation, tests and eventually negotiations with some suppliers, we finally got a couple of prototypes of the Vacuum Silicon Photo Multiplier Tube (VSiPMT) made under our specifications by Hamamatsu. We present in this paper the most important results of characterization tests of the first prototypes of the VSiPMT.

Selective Dirac voltage engineering of individual graphene field-effect transistors for digital inverter and frequency multiplier integrations

NASA Astrophysics Data System (ADS)

Sul, Onejae; Kim, Kyumin; Jung, Yungwoo; Choi, Eunsuk; Lee, Seung-Beck

2017-09-01

The ambipolar band structure of graphene presents unique opportunities for novel electronic device applications. A cycle of gate voltage sweep in a conventional graphene transistor produces a frequency-doubled output current. To increase the frequency further, we used various graphene doping control techniques to produce Dirac voltage engineered graphene channels. The various surface treatments and substrate conditions produced differently doped graphene channels that were integrated on a single substrate and multiple Dirac voltages were observed by applying a single gate voltage sweep. We applied the Dirac voltage engineering techniques to graphene field-effect transistors on a single chip for the fabrication of a frequency multiplier and a logic inverter demonstrating analog and digital circuit application possibilities.

Four-gate transistor analog multiplier circuit

NASA Technical Reports Server (NTRS)

Mojarradi, Mohammad M. (Inventor); Blalock, Benjamin (Inventor); Cristoloveanu, Sorin (Inventor); Chen, Suheng (Inventor); Akarvardar, Kerem (Inventor)

2011-01-01

A differential output analog multiplier circuit utilizing four G.sup.4-FETs, each source connected to a current source. The four G.sup.4-FETs may be grouped into two pairs of two G.sup.4-FETs each, where one pair has its drains connected to a load, and the other par has its drains connected to another load. The differential output voltage is taken at the two loads. In one embodiment, for each G.sup.4-FET, the first and second junction gates are each connected together, where a first input voltage is applied to the front gates of each pair, and a second input voltage is applied to the first junction gates of each pair. Other embodiments are described and claimed.

Experimental demonstration of a 5th harmonic mm-wave frequency multiplying vacuum tube

NASA Astrophysics Data System (ADS)

Toufexis, Filippos; Tantawi, Sami G.; Jensen, Aaron; Dolgashev, Valery A.; Haase, Andrew; Fazio, Michael V.; Borchard, Philipp

2017-06-01

We report the experimental demonstration of a 5th harmonic mm-wave frequency multiplying vacuum electronic device, which uses an over-moded spherical sector output cavity. In this device, a pencil electron beam is helically deflected in a transverse deflecting cavity before entering the output cavity. No magnetic field is required to focus or guide the beam. We built and tested a proof-of-principle device with an output frequency of 57.12 GHz. The measured peak power was 52.67 W at the 5th harmonic of the drive frequency. Power at the 4th, 6th, and 7th harmonics was 33.28 dB lower than that at the 5th harmonic.

Experimental demonstration of a 5th harmonic mm-wave frequency multiplying vacuum tube

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toufexis, Filippos; Tantawi, Sami G.; Jensen, Aaron

Here, we report the experimental demonstration of a 5th harmonic mm-wave frequency multiplying vacuum electronic device, which uses an over-moded spherical sector output cavity. In this device, a pencil electron beam is helically deflected in a transverse deflecting cavity before entering the output cavity. No magnetic field is required to focus or guide the beam. We built and tested a proof-of-principle device with an output frequency of 57.12 GHz. The measured peak power was 52.67 W at the 5th harmonic of the drive frequency. Power at the 4th, 6th, and 7th harmonics was 33.28 dB lower than that at themore » 5th harmonic.« less

Experimental demonstration of a 5th harmonic mm-wave frequency multiplying vacuum tube

DOE PAGES

Toufexis, Filippos; Tantawi, Sami G.; Jensen, Aaron; ...

2017-06-26

Here, we report the experimental demonstration of a 5th harmonic mm-wave frequency multiplying vacuum electronic device, which uses an over-moded spherical sector output cavity. In this device, a pencil electron beam is helically deflected in a transverse deflecting cavity before entering the output cavity. No magnetic field is required to focus or guide the beam. We built and tested a proof-of-principle device with an output frequency of 57.12 GHz. The measured peak power was 52.67 W at the 5th harmonic of the drive frequency. Power at the 4th, 6th, and 7th harmonics was 33.28 dB lower than that at themore » 5th harmonic.« less

Accelerating fissile material detection with a neutron source

DOEpatents

Rowland, Mark S.; Snyderman, Neal J.

2018-01-30

A neutron detector system for discriminating fissile material from non-fissile material wherein a digital data acquisition unit collects data at high rate, and in real-time processes large volumes of data directly to count neutrons from the unknown source and detecting excess grouped neutrons to identify fission in the unknown source. The system includes a Poisson neutron generator for in-beam interrogation of a possible fissile neutron source and a DC power supply that exhibits electrical ripple on the order of less than one part per million. Certain voltage multiplier circuits, such as Cockroft-Walton voltage multipliers, are used to enhance the effective of series resistor-inductor circuits components to reduce the ripple associated with traditional AC rectified, high voltage DC power supplies.

EFFECTS OF LASER RADIATION ON MATTER. LASER PLASMA: Formation of a plasma jet of multiply charged ions in the interaction of a laser plasma with an external pulsed magnetic field

NASA Astrophysics Data System (ADS)

Dyakin, V. M.; Pikuz, T. A.; Skobelev, I. Yu; Faenov, A. Ya; Wolowski, J.; Karpinski, L.; Kasperczuk, A.; Pisarczyk, T.

1994-12-01

A dense jet of a plasma consisting of multiply charged ions was generated in the interaction of a laser plasma with a strong external axial magnetic field. Images were formed by spectral lines and the soft x-ray spectrum range of the plasma jet was obtained with a large-aperture spectrograph containing a mica crystal bent to form a spherical surface with a radius of R = 10 cm. A tenfold increase in the density of the He-like Mg XI plasma, compared with a freely expanding plasma, was observed at a distance of 5 mm from the target.

Characterization of a novel close-to-root papillomavirus from a Florida manatee by using multiply primed rolling-circle amplification: Trichechus manatus latirostris papillomavirus type 1.

PubMed

Rector, Annabel; Bossart, Gregory D; Ghim, Shin-Je; Sundberg, John P; Jenson, A Bennett; Van Ranst, Marc

2004-11-01

By using an isothermal multiply primed rolling-circle amplification protocol, the complete genomic DNA of a novel papillomavirus was amplified from a skin lesion biopsy of a Florida manatee (Trichechus manatus latirostris), one of the most endangered marine mammals in United States coastal waters. The nucleotide sequence, genome organization, and phylogenetic position of the Trichechus manatus latirostris papillomavirus type 1 (TmPV-1) were determined. TmPV-1 is the first virus isolated from the order of Sirenia. A phylogenetic analysis shows that TmPV-1 is only distantly related to other papillomavirus sequences, and it appears in our phylogenetic tree as a novel close-to-root papillomavirus genus.

Formation of multiply charged ions from large molecules using massive-cluster impact.

PubMed

Mahoney, J F; Cornett, D S; Lee, T D

1994-05-01

Massive-cluster impact is demonstrated to be an effective ionization technique for the mass analysis of proteins as large as 17 kDa. The design of the cluster source permits coupling to both magnetic-sector and quadrupole mass spectrometers. Mass spectra are characterized by the almost total absence of chemical background and a predominance of multiply charged ions formed from 100% glycerol matrix. The number of charge states produced by the technique is observed to range from +3 to +9 for chicken egg lysozyme (14,310 Da). The lower m/z values provided by higher charge states increase the effective mass range of analyses performed with conventional ionization by fast-atom bombardment or liquid secondary ion mass spectrometry.

Selective Dirac voltage engineering of individual graphene field-effect transistors for digital inverter and frequency multiplier integrations.

PubMed

Sul, Onejae; Kim, Kyumin; Jung, Yungwoo; Choi, Eunsuk; Lee, Seung-Beck

2017-09-15

The ambipolar band structure of graphene presents unique opportunities for novel electronic device applications. A cycle of gate voltage sweep in a conventional graphene transistor produces a frequency-doubled output current. To increase the frequency further, we used various graphene doping control techniques to produce Dirac voltage engineered graphene channels. The various surface treatments and substrate conditions produced differently doped graphene channels that were integrated on a single substrate and multiple Dirac voltages were observed by applying a single gate voltage sweep. We applied the Dirac voltage engineering techniques to graphene field-effect transistors on a single chip for the fabrication of a frequency multiplier and a logic inverter demonstrating analog and digital circuit application possibilities.

14 CFR 25.301 - Loads.

Code of Federal Regulations, 2010 CFR

2010-01-01

... significantly change the distribution of external or internal loads, this redistribution must be taken into... loads multiplied by prescribed factors of safety). Unless otherwise provided, prescribed loads are limit...

A CMOS 0.18 μm 600 MHz clock multiplier PLL and a pseudo-LVDS driver for the high speed data transmission for the ALICE Inner Tracking System front-end chip

NASA Astrophysics Data System (ADS)

Lattuca, A.; Mazza, G.; Aglieri Rinella, G.; Cavicchioli, C.; Chanlek, N.; Collu, A.; Degerli, Y.; Dorokhov, A.; Flouzat, C.; Gajanana, D.; Gao, C.; Guilloux, F.; Hillemanns, H.; Hristozkov, S.; Junique, A.; Keil, M.; Kim, D.; Kofarago, M.; Kugathasan, T.; Kwon, Y.; Mager, M.; Sielewicz, K. Marek; Marin Tobon, C. Augusto; Marras, D.; Martinengo, P.; Mugnier, H.; Musa, L.; Pham, T. Hung; Puggioni, C.; Reidt, F.; Riedler, P.; Rousset, J.; Siddhanta, S.; Snoeys, W.; Song, M.; Usai, G.; Van Hoorne, J. Willem; Yang, P.

2016-01-01

This work presents the 600 MHz clock multiplier PLL and the pseudo-LVDS driver which are two essential components of the Data Transmission Unit (DTU), a fast serial link for the 1.2 Gb/s data transmission of the ALICE inner detector front-end chip (ALPIDE). The PLL multiplies the 40 MHz input clock in order to obtain the 600 MHz and the 200 MHz clock for a fast serializer which works in Double Data Rate mode. The outputs of the serializer feed the pseudo-LVDS driver inputs which transmits the data from the pixel chip to the patch panel with a limited number of signal lines. The driver drives a 5.3 m-6.5 m long differential transmission line by steering a maximum of 5 mA of current at the target speed. To overcome bandwidth limitations coming from the long cables the pre-emphasis can be applied to the output. Currents for the main and pre-emphasis driver can individually be adjusted using on-chip digital-to-analog converters. The circuits will be integrated in the pixel chip and are designed in the same 0.18 μm CMOS technology and will operate from the same 1.8 V supply. Design and test results of both circuits are presented.

An Agent-Based Modeling Approach for Determining Corn Stover Removal Rate and Transboundary Effects

NASA Astrophysics Data System (ADS)

Gan, Jianbang; Langeveld, J. W. A.; Smith, C. T.

2014-02-01

Bioenergy production involves different agents with potentially different objectives, and an agent's decision often has transboundary impacts on other agents along the bioenergy value chain. Understanding and estimating the transboundary impacts is essential to portraying the interactions among the different agents and in the search for the optimal configuration of the bioenergy value chain. We develop an agent-based model to mimic the decision making by feedstock producers and feedstock-to-biofuel conversion plant operators and propose multipliers (i.e., ratios of economic values accruing to different segments and associated agents in the value chain) for assessing the transboundary impacts. Our approach is generic and thus applicable to a variety of bioenergy production systems at different sites and geographic scales. We apply it to the case of producing ethanol using corn stover in Iowa, USA. The results from the case study indicate that stover removal rate is site specific and varies considerably with soil type, as well as other factors, such as stover price and harvesting cost. In addition, ethanol production using corn stover in the study region would have strong positive ripple effects, with the values of multipliers varying with greenhouse gas price and national energy security premium. The relatively high multiplier values suggest that a large portion of the value associated with corn stover ethanol production would accrue to the downstream end of the value chain instead of stover producers.

Diagnosis of unsuspected facial fractures on routine head computerized tomographic scans in the unconscious multiply injured patient.

PubMed

Rehm, C G; Ross, S E

1995-05-01

This article assessed the value of routine head computerized axial tomographic (CT) scans for diagnosis of unsuspected facial fractures and its clinical implications in the multiply injured patient who is intubated, unconscious, or sedated at the time of initial assessment and requires a head CT scan to assess for brain injury. At a level I trauma center from June 1, 1992 to June 1, 1993 all intubated blunt trauma patients who required routine CT scan evaluation at initial assessment were studied prospectively. Routine scanning started at the foramen magnum and included the maxilla. Patients who died within the first 24 hours were excluded. The study population included 116 patients (85 male, 21 female) aged 12 to 85 years (mean, 28 years) with injury severity scores ranging from 1 to 50 (mean, 23). The mechanism of injury was: motor vehicle accidents (n = 74), motorcycling (n = 5), pedestrians accidents (n = 13), falls (n = 10), bicycling (n = 5), assaults (n = 8), and boating accident (n = 1). There were 19 suspected facial fractures; 18 required surgical repair. There were 27 unsuspected facial fractures; 13 required surgical care. Three suspected fractures were ruled out. Routine head CT scans to assess for brain injury in the multiply injured patient are also very useful in the diagnosis of unsuspected facial fractures, almost half of which will require surgical intervention.

Does investment in the health sector promote or inhibit economic growth?

PubMed Central

2013-01-01

Background Is existing provision of health services in Europe affordable during the recession or could cuts damage economic growth? This debate centres on whether government spending has positive or negative effects on economic growth. In this study, we evaluate the economic effects of alternative types of government spending by estimating “fiscal multipliers” (the return on investment for each $1 dollar of government spending). Methods Using cross-national fixed effects models covering 25 EU countries from 1995 to 2010, we quantified fiscal multipliers both before and during the recession that began in 2008. Results We found that the multiplier for total government spending was 1.61 (95% CI: 1.37 to 1.86), but there was marked heterogeneity across types of spending. The fiscal multipliers ranged from −9.8 for defence (95% CI: -16.7 to −3.0) to 4.3 for health (95% CI: 2.5 to 6.1). These differences appear to be explained by varying degrees of absorption of government spending into the domestic economy. Defence was linked to significantly greater trade deficits (β = −7.58, p=0.017), whereas health and education had no effect on trade deficits (peducation=0.62; phealth= 0.33). Conclusion Our findings indicate that government spending on health may have short-term effects that make recovery more likely. PMID:24059873

Clinical utility of spot urine protein-to-creatinine ratio modified by estimated daily creatinine excretion in children.

PubMed

Yang, Eun Mi; Yoon, Bo Ae; Kim, Soo Wan; Kim, Chan Jong

2017-06-01

The spot urine protein-to-creatinine ratio (UPCR) is widely used to predict 24-h urine protein (24-h UP) excretion. In patients with low daily urine creatinine excretion (UCr), however, the UPCR may overestimate 24-h UP. The aim of this study was to predict 24-h UP using UPCR adjusted by estimated 24-h UCr in children. This study included 442 children whose 24-h UP and spot UPCR were measured concomitantly. Estimated 24-h UCr was calculated using three previously existing equations. We estimated the 24-h UP excretion from UPCR by multiplying the estimated UCr. The results were compared with the measured 24-h UP. There was a strong correlation between UPCR and 24-h UP (r = 0.801, P < 0.001), and the correlation improved after multiplying the UPCR by the measured UCr (r = 0.847, P < 0.001). Using the estimated UCr rather than the measured UCr, there was high accuracy and strong correlation between the estimated UPCR weighted by the Cockcroft-Gault equation and 24-h UP. Improvement was also observed in the subgroup (proteinuria vs. non-proteinuria) analysis, particularly in the proteinuria group. The spot UPCR multiplied by the estimated UCr improved the accuracy of prediction of the 24-h UP in children.

Comparing young and older adults' perceptions of conflicting stereotypes and multiply-categorizable individuals.

PubMed

Kang, Sonia K; Chasteen, Alison L; Cadieux, Jonathan; Cary, Lindsey A; Syeda, Maisha

2014-09-01

Individuals can be simultaneously categorized into multiple social groups (e.g., racial, gender, age), and stereotypes about one social group may conflict with another. Two such conflicting stereotype sets are those associated with older adults (e.g., frail, kind) and with Black people (e.g., violent, hostile). Recent research shows that young adult perceivers evaluate elderly Black men more positively than young Black men, suggesting that components of the elderly stereotype moderate the influence of conflicting Black stereotypes (Kang & Chasteen, 2009). The current research begins to examine whether this pattern of perceiving multiply-categorizable individuals is maintained among older adults or altered, perhaps due to aging-related cognitive and motivational changes. In three studies using different targets and evaluative tasks, both young and older participants showed evidence of an interplay between Black and elderly stereotypes, such that they perceived elderly Black targets more positively than young Black targets. A similar pattern was observed when assessing emotion change (Study 1), making ratings of warmth and power in the past, present, and future (Study 2), and when directly comparing young and old Black and White targets on traits related to warmth and power (Study 3). The absence of age differences suggests that evaluation of multiply-categorizable targets follows comparable underlying patterns of stereotype activation and inhibition in younger and older adults. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Does the asymmetry multiplier in the 1991 NIOSH lifting equation adequately control the biomechanical loading of the spine?

PubMed

Lavender, S A; Li, Y C; Natarajan, R N; Andersson, G B J

2009-01-01

The aim of this research was to evaluate whether the asymmetry multiplier incorporated in the 1991 National Institute for Occupational Safety and Health lifting equation adequately controls the biomechanical spine loads during asymmetric lifting. Sixteen male subjects lifted a box from four initial locations varying in terms of the angular deviation from the mid-sagittal plane (0, 30, 60 and 90 degrees). From each location, boxes that weighed the recommended weight limit (RWL) and three times the RWL were lifted at two qualitatively defined lifting speeds. Ground reaction forces were combined with kinematic data in a linked-segment model to quantify the 3-D moments at the base of the spine (L5/S1) and the spine compression forces. The results show that the twisting and lateral bending moments increased with task asymmetry despite the lessening of the RWL (p<0.01). The flexion moment and the spine compression decreased with asymmetry, although at a slower rate than the RWL. When the dynamics were removed from the linked segment spine model to approximate the assumption of slow and smooth lifting, the estimated compression remained approximately 3400 N across all asymmetry conditions. Thus, the reduction in the RWL due to asymmetry multiplier appears appropriate and should not be changed, as been suggested by recent psychophysical studies.

Aiding the search: Examining individual differences in multiply-constrained problem solving.

PubMed

Ellis, Derek M; Brewer, Gene A

2018-07-01

Understanding and resolving complex problems is of vital importance in daily life. Problems can be defined by the limitations they place on the problem solver. Multiply-constrained problems are traditionally examined with the compound remote associates task (CRAT). Performance on the CRAT is partially dependent on an individual's working memory capacity (WMC). These findings suggest that executive processes are critical for problem solving and that there are reliable individual differences in multiply-constrained problem solving abilities. The goals of the current study are to replicate and further elucidate the relation between WMC and CRAT performance. To achieve these goals, we manipulated preexposure to CRAT solutions and measured WMC with complex-span tasks. In Experiment 1, we report evidence that preexposure to CRAT solutions improved problem solving accuracy, WMC was correlated with problem solving accuracy, and that WMC did not moderate the effect of preexposure on problem solving accuracy. In Experiment 2, we preexposed participants to correct and incorrect solutions. We replicated Experiment 1 and found that WMC moderates the effect of exposure to CRAT solutions such that high WMC participants benefit more from preexposure to correct solutions than low WMC (although low WMC participants have preexposure benefits as well). Broadly, these results are consistent with theories of working memory and problem solving that suggest a mediating role of attention control processes. Published by Elsevier Inc.

Gerstmann's Syndrome

MedlinePlus

... time when they are challenged with writing and math exercises. Generally, children with the disorder exhibit poor handwriting and spelling skills, and difficulty with math functions, including adding, subtracting, multiplying, and dividing. An ...

Child Maltreatment: An Ecological Integration.

ERIC Educational Resources Information Center

Belsky, Jay

1980-01-01

Draws from works by Bronfenbrenner, Tinbergen, and Burgess to conceptualize child maltreatment as a social-psychological phenomenon that is multiply determined by individual, family, community, and cultural forces. (Author/GC)

Endocarditis

MedlinePlus

... Intramural Research Home / < Back To Health Topics / Endocarditis Endocarditis Also known as What Is Endocarditis (EN-do- ... body, such as the gut, skin, or genitals. Endocarditis Complications As the bacteria or other germs multiply ...

Vemurafenib

MedlinePlus

... blocking the action of an abnormal protein that signals cancer cells to multiply. This helps slow or ... unnecessary or prolonged exposure to sunlight and to wear protective clothing, sunglasses, lip balm and sunscreen (SPF ...

Cobimetinib

MedlinePlus

... blocking the action of an abnormal protein that signals cancer cells to multiply. This helps slow or ... unnecessary or prolonged exposure to sunlight and to wear protective clothing, sunglasses, lip balm and sunscreen (SPF ...

Acalabrutinib

MedlinePlus

... blocking the action of the abnormal protein that signals cancer cells to multiply. This helps stop the ... unnecessary or prolonged exposure to sunlight and to wear protective clothing, sunglasses, and sunscreen. Acalabrutinib may make ...

A Simple Raman Spectrometer.

ERIC Educational Resources Information Center

Blond, J. P.; Boggett, D. M.

1980-01-01

Discusses some basic physical ideas about light scattering and describes a simple Raman spectrometer, a single prism monochromator and a multiplier detector. This discussion is intended for British undergraduate physics students. (HM)

Genital Warts

MedlinePlus

... that they can't be seen with the naked eye. Sometimes, however, genital warts may multiply into ... on Immunization Practices recommends routine HPV vaccination for girls and boys ages 11 and 12. If not ...

40 CFR 405.81 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Ice Cream, Frozen Desserts, Novelties and Other... oxygen demand of the materials entered into process. It can be calculated by multiplying the fats...

40 CFR 405.81 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Ice Cream, Frozen Desserts, Novelties and Other... oxygen demand of the materials entered into process. It can be calculated by multiplying the fats...

Meningioma

MedlinePlus

... meningioma is a tumor that arises from the meninges — the membranes that surround your brain and spinal ... know that something alters some cells in your meninges to make them multiply out of control, leading ...

Characterization of SiPM for cryogenic applications

NASA Astrophysics Data System (ADS)

Cervi, T.; Bonesini, M.; Falcone, A.; Menegolli, A.; Raselli, G. L.; Rossella, M.; Simonetta, M.; Torti, M.

2016-07-01

The development of detectors based on liquefied noble gas (LAr, LXe) is mandatory for experiments dedicated to study physics beyond the Standard Model. For this purpose, it is fundamental to detect the Vacuum Ultra Violet (VUV) scintillation light, produced after the passage of ionizing particles inside the detector sensitive volume, to be used for trigger, timing and calorimetric purposes. Besides the traditional cryogenic Photo-Multiplier Tubes (PMTs), one possibility is to adopt Silicon Photo-Multipliers (SiPMs). We present a comparison of the performance of a SiPM (mod. ASD-NUV3S-P Low Afterpulse) at various cryogenic temperatures, from 60 K up to room temperature, with particular emphasis on the LAr and LXe temperatures. SiPM were characterized in terms of breakdown voltage, gain, pulse shape response, dark count rate and correlated noise.

Analysis of complex elastic structures by a Rayleigh-Ritz component modes method using Lagrange multipliers. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Klein, L. R.

1974-01-01

The free vibrations of elastic structures of arbitrary complexity were analyzed in terms of their component modes. The method was based upon the use of the normal unconstrained modes of the components in a Rayleigh-Ritz analysis. The continuity conditions were enforced by means of Lagrange Multipliers. Examples of the structures considered are: (1) beams with nonuniform properties; (2) airplane structures with high or low aspect ratio lifting surface components; (3) the oblique wing airplane; and (4) plate structures. The method was also applied to the analysis of modal damping of linear elastic structures. Convergence of the method versus the number of modes per component and/or the number of components is discussed and compared to more conventional approaches, ad-hoc methods, and experimental results.

Gaseous electron multiplier-based soft x-ray plasma diagnostics development: Preliminary tests at ASDEX Upgrade.

PubMed

Chernyshova, M; Malinowski, K; Czarski, T; Wojeński, A; Vezinet, D; Poźniak, K T; Kasprowicz, G; Mazon, D; Jardin, A; Herrmann, A; Kowalska-Strzęciwilk, E; Krawczyk, R; Kolasiński, P; Zabołotny, W; Zienkiewicz, P

2016-11-01

A Gaseous Electron Multiplier (GEM)-based detector is being developed for soft X-ray diagnostics on tokamaks. Its main goal is to facilitate transport studies of impurities like tungsten. Such studies are very relevant to ITER, where the excessive accumulation of impurities in the plasma core should be avoided. This contribution provides details of the preliminary tests at ASDEX Upgrade (AUG) with a focus on the most important aspects for detector operation in harsh radiation environment. It was shown that both spatially and spectrally resolved data could be collected, in a reasonable agreement with other AUG diagnostics. Contributions to the GEM signal include also hard X-rays, gammas, and neutrons. First simulations of the effect of high-energy photons have helped understanding these contributions.

Gaseous electron multiplier-based soft x-ray plasma diagnostics development: Preliminary tests at ASDEX Upgrade

NASA Astrophysics Data System (ADS)

Chernyshova, M.; Malinowski, K.; Czarski, T.; Wojeński, A.; Vezinet, D.; Poźniak, K. T.; Kasprowicz, G.; Mazon, D.; Jardin, A.; Herrmann, A.; Kowalska-Strzeciwilk, E.; Krawczyk, R.; Kolasiński, P.; Zabołotny, W.; Zienkiewicz, P.

2016-11-01

A Gaseous Electron Multiplier (GEM)-based detector is being developed for soft X-ray diagnostics on tokamaks. Its main goal is to facilitate transport studies of impurities like tungsten. Such studies are very relevant to ITER, where the excessive accumulation of impurities in the plasma core should be avoided. This contribution provides details of the preliminary tests at ASDEX Upgrade (AUG) with a focus on the most important aspects for detector operation in harsh radiation environment. It was shown that both spatially and spectrally resolved data could be collected, in a reasonable agreement with other AUG diagnostics. Contributions to the GEM signal include also hard X-rays, gammas, and neutrons. First simulations of the effect of high-energy photons have helped understanding these contributions.

High-speed digital signal normalization for feature identification

NASA Technical Reports Server (NTRS)

Ortiz, J. A.; Meredith, B. D.

1983-01-01

A design approach for high speed normalization of digital signals was developed. A reciprocal look up table technique is employed, where a digital value is mapped to its reciprocal via a high speed memory. This reciprocal is then multiplied with an input signal to obtain the normalized result. Normalization improves considerably the accuracy of certain feature identification algorithms. By using the concept of pipelining the multispectral sensor data processing rate is limited only by the speed of the multiplier. The breadboard system was found to operate at an execution rate of five million normalizations per second. This design features high precision, a reduced hardware complexity, high flexibility, and expandability which are very important considerations for spaceborne applications. It also accomplishes a high speed normalization rate essential for real time data processing.

Pulsed Reductive Doping in Titanium Dioxide: An Easy Way for Multiplying the Efficiency of Solar H2 Production from Water

NASA Astrophysics Data System (ADS)

Seferlis, Andreas K.; Neophytides, Stylianos G.

2014-08-01

Solar photoelectrochemical water splitting on TiO2 for H2 production has been investigated for many years and is still considered very promising. Despite the many advantages, Titania's UV-only absorption, limits its terrestrial practical applications. In space though, with the lack of ozone's natural UV filter, this handicap is lifted, rendering TiO2 an attractive candidate as photoelectrocatalyst in space applications. Reductive doping of TiO2 has been investigated over the years for its impressive results but, till now, without practical application due to the impermanent nature of the doping. In this work we present a method that not only multiplies TiO2 water splitting efficiency, but also is facile, stable and easily applied in working conditions.

Characterization of a Novel Close-to-Root Papillomavirus from a Florida Manatee by Using Multiply Primed Rolling-Circle Amplification: Trichechus manatus latirostris Papillomavirus Type 1†

PubMed Central

Rector, Annabel; Bossart, Gregory D.; Ghim, Shin-Je; Sundberg, John P.; Jenson, A. Bennett; Van Ranst, Marc

2004-01-01

By using an isothermal multiply primed rolling-circle amplification protocol, the complete genomic DNA of a novel papillomavirus was amplified from a skin lesion biopsy of a Florida manatee (Trichechus manatus latirostris), one of the most endangered marine mammals in United States coastal waters. The nucleotide sequence, genome organization, and phylogenetic position of the Trichechus manatus latirostris papillomavirus type 1 (TmPV-1) were determined. TmPV-1 is the first virus isolated from the order of Sirenia. A phylogenetic analysis shows that TmPV-1 is only distantly related to other papillomavirus sequences, and it appears in our phylogenetic tree as a novel close-to-root papillomavirus genus. PMID:15507660

Operational stability prediction in milling based on impact tests

NASA Astrophysics Data System (ADS)

Kiss, Adam K.; Hajdu, David; Bachrathy, Daniel; Stepan, Gabor

2018-03-01

Chatter detection is usually based on the analysis of measured signals captured during cutting processes. These techniques, however, often give ambiguous results close to the stability boundaries, which is a major limitation in industrial applications. In this paper, an experimental chatter detection method is proposed based on the system's response for perturbations during the machining process, and no system parameter identification is required. The proposed method identifies the dominant characteristic multiplier of the periodic dynamical system that models the milling process. The variation of the modulus of the largest characteristic multiplier can also be monitored, the stability boundary can precisely be extrapolated, while the manufacturing parameters are still kept in the chatter-free region. The method is derived in details, and also verified experimentally in laboratory environment.

A domain decomposition approach to implementing fault slip in finite-element models of quasi-static and dynamic crustal deformation

USGS Publications Warehouse

Aagaard, Brad T.; Knepley, M.G.; Williams, C.A.

2013-01-01

We employ a domain decomposition approach with Lagrange multipliers to implement fault slip in a finite-element code, PyLith, for use in both quasi-static and dynamic crustal deformation applications. This integrated approach to solving both quasi-static and dynamic simulations leverages common finite-element data structures and implementations of various boundary conditions, discretization schemes, and bulk and fault rheologies. We have developed a custom preconditioner for the Lagrange multiplier portion of the system of equations that provides excellent scalability with problem size compared to conventional additive Schwarz methods. We demonstrate application of this approach using benchmarks for both quasi-static viscoelastic deformation and dynamic spontaneous rupture propagation that verify the numerical implementation in PyLith.

A FLUKA simulation of the KLOE electromagnetic calorimeter

NASA Astrophysics Data System (ADS)

Di Micco, B.; Branchini, P.; Ferrari, A.; Loffredo, S.; Passeri, A.; Patera, V.

2007-10-01

We present the simulation of the KLOE calorimeter with the FLUKA Monte Carlo program. The response of the detector to electromagnetic showers has been studied and compared with the publicly available KLOE data. The energy and the time resolution of the electromagnetic clusters is in good agreement with the data. The simulation has been also used to study a possible improvement of the KLOE calorimeter using multianode photo-multipliers. An HAMAMATSU R7600-M16 photomultiplier has been assembled in order to determine the whole cross talk matrix that has been included in the simulation. The cross talk matrix takes into account the effects of a realistic photo-multiplier's electronics and of its coupling to the active material. The performance of the modified readout has been compared to the usual KLOE configuration.

An experimental study of energy dependence of saturation thickness of multiply scattered gamma rays in binary alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Gurvinderjit; Singh, Bhajan, E-mail: bhajan2k1@yahoo.co.in; Sandhu, B. S.

2015-08-28

The present measurements are carried out to investigate the multiple scattering of 662 keV gamma photons emerging from targets of binary alloys (brass and soldering material). The scattered photons are detected by 51 mm × 51 mm NaI(Tl) scintillation detector whose response unscrambling converting the observed pulse–height distribution to a true photon energy spectrum, is obtained with the help of 10 × 10 inverse response matrix. The numbers of multiply scattered events, having same energy as in the singly scattered distribution, first increases with target thickness and then saturate. The application of response function of scintillation detector does not result in anymore » change of measured saturation thickness. Monte Carlo calculation supports the present experimental results.« less

Four-Quadrant Analog Multipliers Using G4-FETs

NASA Technical Reports Server (NTRS)

Mojarradi, Mohammad; Blalock, Benjamin; Christoloveanu, Sorin; Chen, Suheng; Akarvardar, Kerem

2006-01-01

Theoretical analysis and some experiments have shown that the silicon-on-insulator (SOI) 4-gate transistors known as G4-FETs can be used as building blocks of four-quadrant analog voltage multiplier circuits. Whereas a typical prior analog voltage multiplier contains between six and 10 transistors, it is possible to construct a superior voltage multiplier using only four G4-FETs. A G4-FET is a combination of a junction field-effect transistor (JFET) and a metal oxide/semiconductor field-effect transistor (MOSFET). It can be regarded as a single transistor having four gates, which are parts of a structure that affords high functionality by enabling the utilization of independently biased multiple inputs. The structure of a G4-FET of the type of interest here (see Figure 1) is that of a partially-depleted SOI MOSFET with two independent body contacts, one on each side of the channel. The drain current comprises of majority charge carriers flowing from one body contact to the other that is, what would otherwise be the side body contacts of the SOI MOSFET are used here as the end contacts [the drain (D) and the source (S)] of the G4-FET. What would otherwise be the source and drain of the SOI MOSFET serve, in the G4-FET, as two junction-based extra gates (JG1 and JG2), which are used to squeeze the channel via reverse-biased junctions as in a JFET. The G4-FET also includes a polysilicon top gate (G1), which plays the same role as does the gate in an accumulation-mode MOSFET. The substrate emulates a fourth MOS gate (G2). By making proper choices of G4-FET device parameters in conjunction with bias voltages and currents, one can design a circuit in which two input gate voltages (Vin1,Vin2) control the conduction characteristics of G4-FETs such that the output voltage (Vout) closely approximates a value proportional to the product of the input voltages. Figure 2 depicts two such analog multiplier circuits. In each circuit, there is the following: The input and output voltages are differential, The multiplier core consists of four G4- FETs (M1 through M4) biased by a constant current sink (Ibias), and The G4-FETs in two pairs are loaded by two identical resistors (RL), which convert a differential output current to a differential output voltage. The difference between the two circuits stems from their input and bias configurations. In each case, provided that the input voltages remain within their design ranges as determined by considerations of bias, saturation, and cutoff, then the output voltage is nominally given by Vout = kVin1Vin2, where k is a constant gain factor that depends on the design parameters and is different for the two circuits. In experimental versions of these circuits constructed using discrete G4- FETs and resistors, multiplication of voltages in all four quadrants (that is, in all four combinations of input polarities) was demonstrated, and deviations of the output voltages from linear dependence on the input voltages were found to amount to no more than a few percent. It is anticipated that in fully integrated versions of these circuits, the deviations from linearity will be made considerably smaller through better matching of devices.

HIV Resistance Testing

MedlinePlus

... your medications, HIV will multiply more easily. More mutations will occur. Some of them could cause resistance. ... Genotypic resistance: The genetic code of HIV has mutations that are linked to drug resistance. Clinical resistance ...

40 CFR 405.61 - Specialized definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... materials entered into process. It can be calculated by multiplying the fats, proteins and carbohydrates by... carbohydrates. Composition of input materials may be based on either direct analyses or generally accepted...

40 CFR 405.51 - Specialized definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... materials entered into process. It can be calculated by multiplying the fats, proteins and carbohydrates by... carbohydrates. Composition of input materials may be based on either direct analyses or generally accepted...

40 CFR 405.51 - Specialized definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... materials entered into process. It can be calculated by multiplying the fats, proteins and carbohydrates by... carbohydrates. Composition of input materials may be based on either direct analyses or generally accepted...

40 CFR 405.51 - Specialized definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... materials entered into process. It can be calculated by multiplying the fats, proteins and carbohydrates by... carbohydrates. Composition of input materials may be based on either direct analyses or generally accepted...

Topics

ERIC Educational Resources Information Center

Mathematics Teaching, 1972

1972-01-01

Topics discussed in this column include patterns of inverse multipliers in modular arithmetic; diagrams for product sets, set intersection, and set union; function notation; patterns in the number of partitions of positive integers; and tessellations. (DT)

Keloids and Hypertrophic Scars

MedlinePlus

... to the skin both skin cells and connective tissue cells (fibroblasts) begin multiplying to repair the damage. A scar is made up of 'connective tissue', gristle-like fibers deposited in the skin by ...

21 CFR 145.180 - Canned pineapple.

Code of Federal Regulations, 2014 CFR

2014-04-01

... surface of the unit: deep fruit eyes, pieces of shell, brown spots, bruised portions, and other... a faint, permanently pink coloration. Multiply the number of milliliters of one-tenth normal sodium...

21 CFR 145.180 - Canned pineapple.

Code of Federal Regulations, 2011 CFR

2011-04-01

... surface of the unit: deep fruit eyes, pieces of shell, brown spots, bruised portions, and other... a faint, permanently pink coloration. Multiply the number of milliliters of one-tenth normal sodium...

21 CFR 145.180 - Canned pineapple.

Code of Federal Regulations, 2012 CFR

2012-04-01

... surface of the unit: deep fruit eyes, pieces of shell, brown spots, bruised portions, and other... a faint, permanently pink coloration. Multiply the number of milliliters of one-tenth normal sodium...

21 CFR 145.180 - Canned pineapple.

Code of Federal Regulations, 2013 CFR

2013-04-01

... surface of the unit: deep fruit eyes, pieces of shell, brown spots, bruised portions, and other... a faint, permanently pink coloration. Multiply the number of milliliters of one-tenth normal sodium...

Leukemia

MedlinePlus

... classification is by how fast the leukemia progresses: Acute leukemia. In acute leukemia, the abnormal blood cells are immature blood ... they multiply rapidly, so the disease worsens quickly. Acute leukemia requires aggressive, timely treatment. Chronic leukemia. There ...

21 CFR 155.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Solids in Tomato Products Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20... found (sucrose value from the refractive index tables) and multiply the difference by 1.016. The...

21 CFR 155.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Solids in Tomato Products Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20... found (sucrose value from the refractive index tables) and multiply the difference by 1.016. The...

21 CFR 155.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Solids in Tomato Products Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20... found (sucrose value from the refractive index tables) and multiply the difference by 1.016. The...

21 CFR 155.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Solids in Tomato Products Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20... found (sucrose value from the refractive index tables) and multiply the difference by 1.016. The...

Treating Multiply Relapsed or Refractory Hairy Cell Leukemia

Cancer.gov

In this trial, patients with hairy cell leukemia who have not responded or relapsed after initial chemotherapy will be randomly assigned to receive rituximab combined with either pentostatin or bendamustine.

40 CFR 405.71 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Fluid Mix for Ice Cream and Other Frozen Desserts... materials entered into process. It can be calculated by multiplying the fats, proteins and carbohydrates by...

40 CFR 405.71 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Fluid Mix for Ice Cream and Other Frozen Desserts... materials entered into process. It can be calculated by multiplying the fats, proteins and carbohydrates by...

7 CFR 98.101 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MEALS, READY-TO-EAT (MRE's), MEATS, AND MEAT PRODUCTS USDA Certification of Laboratories for the Testing... the horse. When such infected meat is inadequately cooked and eaten by man, the live worm multiplies...

Dabrafenib

MedlinePlus

... to treat a certain type of non-small cell lung cancer (NSCLC) that has spread to nearby tissues or ... the action of an abnormal protein that signals cancer cells to multiply. This helps stop the spread of ...

Trametinib

MedlinePlus

... to treat a certain type of non-small-cell lung cancer (NSCLC) that has spread to nearby tissues or ... the action of an abnormal protein that signals cancer cells to multiply. This helps stop the spread of ...

Brigatinib

MedlinePlus

... to treat a certain type of non-small cell lung cancer (NSCLC) that has spread to other parts of ... the action of an abnormal protein that signals cancer cells to multiply. This helps slow or stop the ...