multistage sampling design: Topics by Science.gov

Sample records for multistage sampling design

A multi-stage drop-the-losers design for multi-arm clinical trials.

PubMed

Wason, James; Stallard, Nigel; Bowden, Jack; Jennison, Christopher

2017-02-01

Multi-arm multi-stage trials can improve the efficiency of the drug development process when multiple new treatments are available for testing. A group-sequential approach can be used in order to design multi-arm multi-stage trials, using an extension to Dunnett's multiple-testing procedure. The actual sample size used in such a trial is a random variable that has high variability. This can cause problems when applying for funding as the cost will also be generally highly variable. This motivates a type of design that provides the efficiency advantages of a group-sequential multi-arm multi-stage design, but has a fixed sample size. One such design is the two-stage drop-the-losers design, in which a number of experimental treatments, and a control treatment, are assessed at a prescheduled interim analysis. The best-performing experimental treatment and the control treatment then continue to a second stage. In this paper, we discuss extending this design to have more than two stages, which is shown to considerably reduce the sample size required. We also compare the resulting sample size requirements to the sample size distribution of analogous group-sequential multi-arm multi-stage designs. The sample size required for a multi-stage drop-the-losers design is usually higher than, but close to, the median sample size of a group-sequential multi-arm multi-stage trial. In many practical scenarios, the disadvantage of a slight loss in average efficiency would be overcome by the huge advantage of a fixed sample size. We assess the impact of delay between recruitment and assessment as well as unknown variance on the drop-the-losers designs.
Multistage open-tube trap for enrichment of part-per-trillion trace components of low-pressure (below 27-kPa) air samples

NASA Technical Reports Server (NTRS)

Ohara, D.; Vo, T.; Vedder, J. F.

1985-01-01

A multistage open-tube trap for cryogenic collection of trace components in low-pressure air samples is described. The open-tube design allows higher volumetric flow rates than densely packed glass-bead traps commonly reported and is suitable for air samples at pressures below 27 kPa with liquid nitrogen as the cryogen. Gas blends containing 200 to 2500 parts per trillion by volume each of ethane and ethene were sampled and hydrocarbons were enriched with 100 + or - 4 percent trap efficiency. The multistage design is more efficient than equal-length open-tube traps under the conditions of the measurements.
Planning and processing multistage samples with a computer programMUST.

Treesearch

John W. Hazard; Larry E. Stewart

1974-01-01

A computer program was written to handle multistage sampling designs in insect populations. It is, however, general enough to be used for any population where the number of stages does not exceed three. The program handles three types of sampling situations, all of which assume equal probability sampling. Option 1 takes estimates of sample variances, costs, and either...
Community Health Centers: Providers, Patients, and Content of Care

MedlinePlus

... Statistics (NCHS). NAMCS uses a multistage probability sample design involving geographic primary sampling units (PSUs), physician practices ... 05 level. To account for the complex sample design during variance estimation, all analyses were performed using ...
Efficient design and inference for multistage randomized trials of individualized treatment policies.

PubMed

Dawson, Ree; Lavori, Philip W

2012-01-01

Clinical demand for individualized "adaptive" treatment policies in diverse fields has spawned development of clinical trial methodology for their experimental evaluation via multistage designs, building upon methods intended for the analysis of naturalistically observed strategies. Because often there is no need to parametrically smooth multistage trial data (in contrast to observational data for adaptive strategies), it is possible to establish direct connections among different methodological approaches. We show by algebraic proof that the maximum likelihood (ML) and optimal semiparametric (SP) estimators of the population mean of the outcome of a treatment policy and its standard error are equal under certain experimental conditions. This result is used to develop a unified and efficient approach to design and inference for multistage trials of policies that adapt treatment according to discrete responses. We derive a sample size formula expressed in terms of a parametric version of the optimal SP population variance. Nonparametric (sample-based) ML estimation performed well in simulation studies, in terms of achieved power, for scenarios most likely to occur in real studies, even though sample sizes were based on the parametric formula. ML outperformed the SP estimator; differences in achieved power predominately reflected differences in their estimates of the population mean (rather than estimated standard errors). Neither methodology could mitigate the potential for overestimated sample sizes when strong nonlinearity was purposely simulated for certain discrete outcomes; however, such departures from linearity may not be an issue for many clinical contexts that make evaluation of competitive treatment policies meaningful.
THE NORTH CAROLINA HERALD PILOT STUDY

EPA Science Inventory

The sampling design for the National Children's Study (NCS) calls for a population-based, multi-stage, clustered household sampling approach. The full sample is designed to be representative of both urban and rural births in the United States, 2007-2011. While other sur...
Aerodynamic Analysis of Multistage Turbomachinery Flows in Support of Aerodynamic Design

NASA Technical Reports Server (NTRS)

Adamczyk, John J.

1999-01-01

This paper summarizes the state of 3D CFD based models of the time average flow field within axial flow multistage turbomachines. Emphasis is placed on models which are compatible with the industrial design environment and those models which offer the potential of providing credible results at both design and off-design operating conditions. The need to develop models which are free of aerodynamic input from semi-empirical design systems is stressed. The accuracy of such models is shown to be dependent upon their ability to account for the unsteady flow environment in multistage turbomachinery. The relevant flow physics associated with some of the unsteady flow processes present in axial flow multistage machinery are presented along with procedures which can be used to account for them in 3D CFD simulations. Sample results are presented for both axial flow compressors and axial flow turbines which help to illustrate the enhanced predictive capabilities afforded by including these procedures in 3D CFD simulations. Finally, suggestions are given for future work on the development of time average flow models.
RECRUITING FOR A LONGITUDINAL STUDY OF CHILDREN'S HEALTH USING A HOUSEHOLD-BASED PROBABILITY SAMPLING APPROACH

EPA Science Inventory

The sampling design for the National Children¿s Study (NCS) calls for a population-based, multi-stage, clustered household sampling approach (visit our website for more information on the NCS : www.nationalchildrensstudy.gov). The full sample is designed to be representative of ...
Performance of Random Effects Model Estimators under Complex Sampling Designs

ERIC Educational Resources Information Center

Jia, Yue; Stokes, Lynne; Harris, Ian; Wang, Yan

2011-01-01

In this article, we consider estimation of parameters of random effects models from samples collected via complex multistage designs. Incorporation of sampling weights is one way to reduce estimation bias due to unequal probabilities of selection. Several weighting methods have been proposed in the literature for estimating the parameters of…
Cardiorespiratory Fitness Levels among U.S. Youth Aged 12-15 Years: United States, 1999-2004 and 2012

MedlinePlus

... use a complex, stratified, multistage probability cluster sampling design. NHANES data collection is based on a nationally ... conjunction with the 2012 NHANES and the survey design was based on the design for NHANES, with ...
Novel methodology for wide-ranged multistage morphing waverider based on conical theory

NASA Astrophysics Data System (ADS)

Liu, Zhen; Liu, Jun; Ding, Feng; Xia, Zhixun

2017-11-01

This study proposes the wide-ranged multistage morphing waverider design method. The flow field structure and aerodynamic characteristics of multistage waveriders are also analyzed. In this method, the multistage waverider is generated in the same conical flowfield, which contains a free-stream surface and different compression-stream surfaces. The obtained results show that the introduction of the multistage waverider design method can solve the problem of aerodynamic performance deterioration in the off-design state and allow the vehicle to always maintain the optimal flight state. The multistage waverider design method, combined with transfiguration flight strategy, can lead to greater design flexibility and the optimization of hypersonic wide-ranged waverider vehicles.
Prevalence of Obesity Among Adults and Youth: United States, 2011-2014

MedlinePlus

... sample is selected through a complex, multistage probability design. In 2011–2012 and 2013–2014, non-Hispanic ... All variance estimates accounted for the complex survey design by using Taylor series linearization. Pregnant females were ...
Multiple Imputation in Two-Stage Cluster Samples Using The Weighted Finite Population Bayesian Bootstrap.

PubMed

Zhou, Hanzhi; Elliott, Michael R; Raghunathan, Trivellore E

2016-06-01

Multistage sampling is often employed in survey samples for cost and convenience. However, accounting for clustering features when generating datasets for multiple imputation is a nontrivial task, particularly when, as is often the case, cluster sampling is accompanied by unequal probabilities of selection, necessitating case weights. Thus, multiple imputation often ignores complex sample designs and assumes simple random sampling when generating imputations, even though failing to account for complex sample design features is known to yield biased estimates and confidence intervals that have incorrect nominal coverage. In this article, we extend a recently developed, weighted, finite-population Bayesian bootstrap procedure to generate synthetic populations conditional on complex sample design data that can be treated as simple random samples at the imputation stage, obviating the need to directly model design features for imputation. We develop two forms of this method: one where the probabilities of selection are known at the first and second stages of the design, and the other, more common in public use files, where only the final weight based on the product of the two probabilities is known. We show that this method has advantages in terms of bias, mean square error, and coverage properties over methods where sample designs are ignored, with little loss in efficiency, even when compared with correct fully parametric models. An application is made using the National Automotive Sampling System Crashworthiness Data System, a multistage, unequal probability sample of U.S. passenger vehicle crashes, which suffers from a substantial amount of missing data in "Delta-V," a key crash severity measure.
Multiple Imputation in Two-Stage Cluster Samples Using The Weighted Finite Population Bayesian Bootstrap

PubMed Central

Zhou, Hanzhi; Elliott, Michael R.; Raghunathan, Trivellore E.

2017-01-01

Multistage sampling is often employed in survey samples for cost and convenience. However, accounting for clustering features when generating datasets for multiple imputation is a nontrivial task, particularly when, as is often the case, cluster sampling is accompanied by unequal probabilities of selection, necessitating case weights. Thus, multiple imputation often ignores complex sample designs and assumes simple random sampling when generating imputations, even though failing to account for complex sample design features is known to yield biased estimates and confidence intervals that have incorrect nominal coverage. In this article, we extend a recently developed, weighted, finite-population Bayesian bootstrap procedure to generate synthetic populations conditional on complex sample design data that can be treated as simple random samples at the imputation stage, obviating the need to directly model design features for imputation. We develop two forms of this method: one where the probabilities of selection are known at the first and second stages of the design, and the other, more common in public use files, where only the final weight based on the product of the two probabilities is known. We show that this method has advantages in terms of bias, mean square error, and coverage properties over methods where sample designs are ignored, with little loss in efficiency, even when compared with correct fully parametric models. An application is made using the National Automotive Sampling System Crashworthiness Data System, a multistage, unequal probability sample of U.S. passenger vehicle crashes, which suffers from a substantial amount of missing data in “Delta-V,” a key crash severity measure. PMID:29226161
Multistage Electrophoretic Separators

NASA Technical Reports Server (NTRS)

Thomas, Nathan; Doyle, John F.; Kurk, Andy; Vellinger, John C.; Todd, Paul

2006-01-01

A multistage electrophoresis apparatus has been invented for use in the separation of cells, protein molecules, and other particles and solutes in concentrated aqueous solutions and suspensions. The design exploits free electrophoresis but overcomes the deficiencies of prior free-electrophoretic separators by incorporating a combination of published advances in mathematical modeling of convection, sedimentation, electro-osmotic flow, and the sedimentation and aggregation of droplets. In comparison with other electrophoretic separators, these apparatuses are easier to use and are better suited to separation in relatively large quantities characterized in the art as preparative (in contradistinction to smaller quantities characterized in the art as analytical). In a multistage electrophoretic separator according to the invention, an applied vertical steady electric field draws the electrically charged particles of interest from within a cuvette to within a collection cavity that has been moved into position of the cuvette. There are multiple collection cavities arranged in a circle; each is aligned with the cuvette for a prescribed short time. The multistage, short-migration-path character of the invention solves, possibly for the first time, the fluid-instability problems associated with free electrophoresis. The figure shows a prototype multistage electrophoretic separator that includes four sample stations and five collection stages per sample. At each sample station, an aqueous solution or suspension containing charged species to be separated is loaded into a cuvette, which is machined into a top plate. The apparatus includes a lower plate, into which 20 collection cavities have been milled. Each cavity is filled with an electrophoresis buffer solution. For the collection of an electrophoretic fraction, the lower plate is rotated to move a designated collection cavity into alignment with the opening of the cuvette. An electric field is then applied between a non-gassing electrode in the collection cavity and an electrolyte compartment, which is separated from the cuvette by a semipermeable membrane. The electrolyte is refreshed by circulation by use of a peristaltic pump. In subsequent steps, the lower plate is rotated to collect other electrophoretic fractions. Later, the collected fractions are removed from the collection cavities through ports that have threaded plugs. The base of the apparatus contains power supplies and a computer interface. The design includes provisions for monitoring and feedback control of cavity position, electric field, and temperature. The operation of the apparatus can easily be automated, as demonstrated by use of software that has already been written for this purpose.
Removing a Nail from the Boot Camp Coffin: An Outcome Evaluation of Minnesota's Challenge Incarceration Program

ERIC Educational Resources Information Center

Duwe, Grant; Kerschner, Deborah

2008-01-01

Using a retrospective, quasiexperimental design, this study evaluates Minnesota's Challenge Incarceration Program (CIP), examining whether it has lowered recidivism and saved money. In addition to utilizing a lengthy follow-up period and multiple measures of recidivism and participation, a multistage sampling design was employed to create a…
The Sampling Design of the China Family Panel Studies (CFPS)

PubMed Central

Xie, Yu; Lu, Ping

2018-01-01

The China Family Panel Studies (CFPS) is an on-going, nearly nationwide, comprehensive, longitudinal social survey that is intended to serve research needs on a large variety of social phenomena in contemporary China. In this paper, we describe the sampling design of the CFPS sample for its 2010 baseline survey and methods for constructing weights to adjust for sampling design and survey nonresponses. Specifically, the CFPS used a multi-stage probability strategy to reduce operation costs and implicit stratification to increase efficiency. Respondents were oversampled in five provinces or administrative equivalents for regional comparisons. We provide operation details for both sampling and weights construction. PMID:29854418
A Testlet Assembly Design for Adaptive Multistage Tests

ERIC Educational Resources Information Center

Luecht, Richard; Brumfield, Terry; Breithaupt, Krista

2006-01-01

This article describes multistage tests and some practical test development considerations related to the design and implementation of a multistage test, using the Uniform CPA (certified public accountant) Examination as a case study. The article further discusses the use of automated test assembly procedures in an operational context to produce…
Validity, Reliability and Difficulty Indices for Instructor-Built Exam Questions

ERIC Educational Resources Information Center

Jandaghi, Gholamreza; Shaterian, Fatemeh

2008-01-01

The purpose of the research is to determine college Instructor's skill rate in designing exam questions in chemistry subject. The statistical population was all of chemistry exam sheets for two semesters in one academic year from which a sample of 364 exam sheets was drawn using multistage cluster sampling. Two experts assessed the sheets and by…
The Evaluation of Bias of the Weighted Random Effects Model Estimators. Research Report. ETS RR-11-13

ERIC Educational Resources Information Center

Jia, Yue; Stokes, Lynne; Harris, Ian; Wang, Yan

2011-01-01

Estimation of parameters of random effects models from samples collected via complex multistage designs is considered. One way to reduce estimation bias due to unequal probabilities of selection is to incorporate sampling weights. Many researchers have been proposed various weighting methods (Korn, & Graubard, 2003; Pfeffermann, Skinner,…

Dietary Supplement Use Among U.S. Adults Has Increased Since NHANES III (1988-1994)

MedlinePlus

... uses a complex, stratified, multistage probability cluster sampling design and oversamples in order to increase precision in estimates for certain groups. NHANES III was one in a series of periodic surveys conducted in two cycles during ...
Factorial versus multi-arm multi-stage designs for clinical trials with multiple treatments.

PubMed

Jaki, Thomas; Vasileiou, Despina

2017-02-20

When several treatments are available for evaluation in a clinical trial, different design options are available. We compare multi-arm multi-stage with factorial designs, and in particular, we will consider a 2 × 2 factorial design, where groups of patients will either take treatments A, B, both or neither. We investigate the performance and characteristics of both types of designs under different scenarios and compare them using both theory and simulations. For the factorial designs, we construct appropriate test statistics to test the hypothesis of no treatment effect against the control group with overall control of the type I error. We study the effect of the choice of the allocation ratios on the critical value and sample size requirements for a target power. We also study how the possibility of an interaction between the two treatments A and B affects type I and type II errors when testing for significance of each of the treatment effects. We present both simulation results and a case study on an osteoarthritis clinical trial. We discover that in an optimal factorial design in terms of minimising the associated critical value, the corresponding allocation ratios differ substantially to those of a balanced design. We also find evidence of potentially big losses in power in factorial designs for moderate deviations from the study design assumptions and little gain compared with multi-arm multi-stage designs when the assumptions hold. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.
Health and Dietary Patterns of the Elderly in Botswana

ERIC Educational Resources Information Center

Maruapula, Segametsi; Chapman-Novakofski, Karen

2007-01-01

Objective: To describe associations among socioeconomic conditions and dietary patterns of Botswana elderly. Design: Secondary analysis from a cross-sectional nationwide survey. Participants: Subjects (N = 1086, 60-99 years old) were selected after multistage sampling. Main Outcome Measures: Dietary patterns were dependent variables; health and…
Private Universities in Kenya Seek Alternative Ways to Manage Change in Teacher Education Curriculum in Compliance with the Commission for University Education Reforms

ERIC Educational Resources Information Center

Amimo, Catherine Adhiambo

2016-01-01

This study investigated management of change in teacher education curriculum in Private universities in Kenya. The study employed a concurrent mixed methods design that is based on the use of both quantitative and qualitative approaches. A multi-stage sampling process which included purposive, convenience, cluster, and snowball sampling methods…
Student Assessment of Quality of Access at the National Open University of Nigeria (NOUN)

ERIC Educational Resources Information Center

Inegbedion, Juliet O.; Adu, Folorunso I.; Ofulue, Christine Y.

2016-01-01

This paper presents a study conducted by Inegbedion, Adu and Ofulue from the National Open University of Nigeria. The study focused on the quality of access (admission and registration) at NOUN from a student perspective. A survey design was used for the study while a multi-stage sampling technique was used to select the sample size. All the…
Speech coding at low to medium bit rates

NASA Astrophysics Data System (ADS)

Leblanc, Wilfred Paul

1992-09-01

Improved search techniques coupled with improved codebook design methodologies are proposed to improve the performance of conventional code-excited linear predictive coders for speech. Improved methods for quantizing the short term filter are developed by employing a tree search algorithm and joint codebook design to multistage vector quantization. Joint codebook design procedures are developed to design locally optimal multistage codebooks. Weighting during centroid computation is introduced to improve the outlier performance of the multistage vector quantizer. Multistage vector quantization is shown to be both robust against input characteristics and in the presence of channel errors. Spectral distortions of about 1 dB are obtained at rates of 22-28 bits/frame. Structured codebook design procedures for excitation in code-excited linear predictive coders are compared to general codebook design procedures. Little is lost using significant structure in the excitation codebooks while greatly reducing the search complexity. Sparse multistage configurations are proposed for reducing computational complexity and memory size. Improved search procedures are applied to code-excited linear prediction which attempt joint optimization of the short term filter, the adaptive codebook, and the excitation. Improvements in signal to noise ratio of 1-2 dB are realized in practice.
Grouping methods for estimating the prevalences of rare traits from complex survey data that preserve confidentiality of respondents.

PubMed

Hyun, Noorie; Gastwirth, Joseph L; Graubard, Barry I

2018-03-26

Originally, 2-stage group testing was developed for efficiently screening individuals for a disease. In response to the HIV/AIDS epidemic, 1-stage group testing was adopted for estimating prevalences of a single or multiple traits from testing groups of size q, so individuals were not tested. This paper extends the methodology of 1-stage group testing to surveys with sample weighted complex multistage-cluster designs. Sample weighted-generalized estimating equations are used to estimate the prevalences of categorical traits while accounting for the error rates inherent in the tests. Two difficulties arise when using group testing in complex samples: (1) How does one weight the results of the test on each group as the sample weights will differ among observations in the same group. Furthermore, if the sample weights are related to positivity of the diagnostic test, then group-level weighting is needed to reduce bias in the prevalence estimation; (2) How does one form groups that will allow accurate estimation of the standard errors of prevalence estimates under multistage-cluster sampling allowing for intracluster correlation of the test results. We study 5 different grouping methods to address the weighting and cluster sampling aspects of complex designed samples. Finite sample properties of the estimators of prevalences, variances, and confidence interval coverage for these grouping methods are studied using simulations. National Health and Nutrition Examination Survey data are used to illustrate the methods. Copyright © 2018 John Wiley & Sons, Ltd.
Assessment of Validity, Reliability and Difficulty Indices for Teacher-Built Physics Exam Questions in First Year High School

ERIC Educational Resources Information Center

Jandaghi, Gholamreza

2010-01-01

The purpose of the research is to determine high school teachers' skill rate in designing exam questions in physics subject. The statistical population was all of physics exam shits for two semesters in one school year from which a sample of 364 exam shits was drawn using multistage cluster sampling. Two experts assessed the shits and by using…
A Top-Down Approach to Designing the Computerized Adaptive Multistage Test

ERIC Educational Resources Information Center

Luo, Xiao; Kim, Doyoung

2018-01-01

The top-down approach to designing a multistage test is relatively understudied in the literature and underused in research and practice. This study introduced a route-based top-down design approach that directly sets design parameters at the test level and utilizes the advanced automated test assembly algorithm seeking global optimality. The…
The integration of manual and automatic image analysis techniques with supporting ground data in a multistage sampling framework for timber resource inventories: Three examples

NASA Technical Reports Server (NTRS)

Gialdini, M.; Titus, S. J.; Nichols, J. D.; Thomas, R.

1975-01-01

An approach to information acquisition is discussed in the context of meeting user-specified needs in a cost-effective, timely manner through the use of remote sensing data, ground data, and multistage sampling techniques. The roles of both LANDSAT imagery and Skylab photography are discussed as first stages of three separate multistage timber inventory systems and results are given for each system. Emphasis is placed on accuracy and meeting user needs.
Design of Multistage Axial-Flow Compressors

NASA Technical Reports Server (NTRS)

Crouse, J. E.; Gorrell, W. T.

1983-01-01

Program developed for computing aerodynamic design of multistage axialflow compressor and associated blading geometry input for internal flow analysis. Aerodynamic solution gives velocity diagrams on selected streamlines of revolution at blade row edges. Program written in FORTRAN IV.
Students' Readiness for E-Learning Application in Higher Education

ERIC Educational Resources Information Center

Rasouli, Atousa; Rahbania, Zahra; Attaran, Mohammad

2016-01-01

The main goal of this research was to investigate the readiness of art students in applying e-learning. This study adopted a survey research design. From three public Iranian Universities (Alzahra, Tarbiat Modares, and Tehran), 347 students were selected by multistage cluster sampling and via Morgan Table. Their readiness for E-learning…
A Methodology to Teach Advanced A/D Converters, Combining Digital Signal Processing and Microelectronics Perspectives

ERIC Educational Resources Information Center

Quintans, C.; Colmenar, A.; Castro, M.; Moure, M. J.; Mandado, E.

2010-01-01

ADCs (analog-to-digital converters), especially Pipeline and Sigma-Delta converters, are designed using complex architectures in order to increase their sampling rate and/or resolution. Consequently, the learning of ADC devices also encompasses complex concepts such as multistage synchronization, latency, oversampling, modulation, noise shaping,…
Test Information Targeting Strategies for Adaptive Multistage Testing Designs.

ERIC Educational Resources Information Center

Luecht, Richard M.; Burgin, William

Adaptive multistage testlet (MST) designs appear to be gaining popularity for many large-scale computer-based testing programs. These adaptive MST designs use a modularized configuration of preconstructed testlets and embedded score-routing schemes to prepackage different forms of an adaptive test. The conditional information targeting (CIT)…
SAS procedures for designing and analyzing sample surveys

USGS Publications Warehouse

Stafford, Joshua D.; Reinecke, Kenneth J.; Kaminski, Richard M.

2003-01-01

Complex surveys often are necessary to estimate occurrence (or distribution), density, and abundance of plants and animals for purposes of re-search and conservation. Most scientists are familiar with simple random sampling, where sample units are selected from a population of interest (sampling frame) with equal probability. However, the goal of ecological surveys often is to make inferences about populations over large or complex spatial areas where organisms are not homogeneously distributed or sampling frames are in-convenient or impossible to construct. Candidate sampling strategies for such complex surveys include stratified,multistage, and adaptive sampling (Thompson 1992, Buckland 1994).
[National Health and Nutrition Survey 2012: design and coverage].

PubMed

Romero-Martínez, Martín; Shamah-Levy, Teresa; Franco-Núñez, Aurora; Villalpando, Salvador; Cuevas-Nasu, Lucía; Gutiérrez, Juan Pablo; Rivera-Dommarco, Juan Ángel

2013-01-01

To describe the design and population coverage of the National Health and Nutrition Survey 2012 (NHNS 2012). The design of the NHNS 2012 is reported, as a probabilistic population based survey with a multi-stage and stratified sampling, as well as the sample inferential properties, the logistical procedures, and the obtained coverage. Household response rate for the NHNS 2012 was 87%, completing data from 50,528 households, where 96 031 individual interviews selected by age and 14,104 of ambulatory health services users were also obtained. The probabilistic design of the NHNS 2012 as well as its coverage allowed to generate inferences about health and nutrition conditions, health programs coverage, and access to health services. Because of their complex designs, all estimations from the NHNS 2012 must use the survey design: weights, primary sampling units, and stratus variables.
Longitudinal Multistage Testing

ERIC Educational Resources Information Center

Pohl, Steffi

2013-01-01

This article introduces longitudinal multistage testing (lMST), a special form of multistage testing (MST), as a method for adaptive testing in longitudinal large-scale studies. In lMST designs, test forms of different difficulty levels are used, whereas the values on a pretest determine the routing to these test forms. Since lMST allows for…
Panel Design Variations in the Multistage Test Using the Mixed-Format Tests

ERIC Educational Resources Information Center

Kim, Jiseon; Chung, Hyewon; Dodd, Barbara G.; Park, Ryoungsun

2012-01-01

This study compared various panel designs of the multistage test (MST) using mixed-format tests in the context of classification testing. Simulations varied the design of the first-stage module. The first stage was constructed according to three levels of test information functions (TIFs) with three different TIF centers. Additional computerized…
Psycho-Demographic Correlates of Behaviour towards Seeking Counselling Intervention among Workers in Lagos, Nigeria

ERIC Educational Resources Information Center

Gesinde, Abiodun Matthew; Sanu, Oluwafunto Jolade

2015-01-01

This study sought to examine the impact which age, gender and psychological adjustment have on behaviour towards seeking professional counselling intervention. Multistage sampling technique was employed to select a total of three hundred workers across Lagos metropolis. The ex post facto research design was adopted for the study. Inventory of…
Texas School Survey of Substance Abuse: Grades 7-12. 1992.

ERIC Educational Resources Information Center

Liu, Liang Y.; Fredlund, Eric V.

The 1992 Texas School Survey results for secondary students are based on data collected from a sample of 73,073 students in grades 7 through 12. Students were randomly selected from school districts throughout the state using a multi-stage probability design. The procedure ensured that students living in metropolitan and rural areas of Texas are…

Multi-stage responsive 4D printed smart structure through varying geometric thickness of shape memory polymer

NASA Astrophysics Data System (ADS)

Teoh, Joanne Ee Mei; Zhao, Yue; An, Jia; Chua, Chee Kai; Liu, Yong

2017-12-01

Shape memory polymers (SMPs) have gained a presence in additive manufacturing due to their role in 4D printing. They can be printed either in multi-materials for multi-stage shape recovery or in a single material for single-stage shape recovery. When printed in multi-materials, material or material-based design is used as a controlling factor for multi-stage shape recovery. However, when printed in a single material, it is difficult to design multi-stage shape recovery due to the lack of a controlling factor. In this research, we explore the use of geometric thickness as a controlling factor to design smart structures possessing multi-stage shape recovery using a single SMP. L-shaped hinges with a thickness ranging from 0.3-2 mm were designed and printed in four different SMPs. The effect of thickness on SMP’s response time was examined via both experiment and finite element analysis using Ansys transient thermal simulation. A method was developed to accurately measure the response time in millisecond resolution. Temperature distribution and heat transfer in specimens during thermal activation were also simulated and discussed. Finally, a spiral square and an artificial flower consisting of a single SMP were designed and printed with appropriate thickness variation for the demonstration of a controlled multi-stage shape recovery. Experimental results indicated that smart structures printed using single material with controlled thickness parameters are able to achieve controlled shape recovery characteristics similar to those printed with multiple materials and uniform geometric thickness. Hence, the geometric parameter can be used to increase the degree of freedom in designing future smart structures possessing complex shape recovery characteristics.
Purposeful Sampling for Qualitative Data Collection and Analysis in Mixed Method Implementation Research.

PubMed

Palinkas, Lawrence A; Horwitz, Sarah M; Green, Carla A; Wisdom, Jennifer P; Duan, Naihua; Hoagwood, Kimberly

2015-09-01

Purposeful sampling is widely used in qualitative research for the identification and selection of information-rich cases related to the phenomenon of interest. Although there are several different purposeful sampling strategies, criterion sampling appears to be used most commonly in implementation research. However, combining sampling strategies may be more appropriate to the aims of implementation research and more consistent with recent developments in quantitative methods. This paper reviews the principles and practice of purposeful sampling in implementation research, summarizes types and categories of purposeful sampling strategies and provides a set of recommendations for use of single strategy or multistage strategy designs, particularly for state implementation research.
Optimal Testlet Pool Assembly for Multistage Testing Designs

ERIC Educational Resources Information Center

Ariel, Adelaide; Veldkamp, Bernard P.; Breithaupt, Krista

2006-01-01

Computerized multistage testing (MST) designs require sets of test questions (testlets) to be assembled to meet strict, often competing criteria. Rules that govern testlet assembly may dictate the number of questions on a particular subject or may describe desirable statistical properties for the test, such as measurement precision. In an MST…
Self-Reported Health among Older Bangladeshis: How Good a Health Indicator Is It?

ERIC Educational Resources Information Center

Rahman, M. Omar; Barsky, Arthur J.

2003-01-01

Purpose: This study examines the value of self-reported health (SRH) as an indicator of underlying health status in a developing country setting. Design and Methods: Logistic regression methods with adjustments for multistage sampling are used to examine the factors associated with SRH in 2,921 men and women aged 50 and older in rural Bangladesh.…
Gender Differences in Mathematics Achievement and Retention Scores: A Case of Problem-Based Learning Method

ERIC Educational Resources Information Center

Ajai, John T.; Imoko, Benjamin I.

2015-01-01

This study was undertaken to assess gender differences in mathematics achievement and retention by using Problem-Based Learning (PBL). The design of the study was pre-posttest quasi-experimental. Four hundred and twenty eight senior secondary one (SS I) students using multistage sampling from ten grant-aided and government schools were involved in…
The Hispanic Americans Baseline Alcohol Survey (HABLAS): Acculturation, Birthplace and Alcohol-Related Social Problems across Hispanic National Groups

ERIC Educational Resources Information Center

Caetano, Raul; Vaeth, Patrice A. C.; Rodriguez, Lori A.

2012-01-01

The purpose of this study was to examine the association between acculturation, birthplace, and alcohol-related social problems across Hispanic national groups. A total of 5,224 Hispanic adults (18+ years) were interviewed using a multistage cluster sample design in Miami, New York, Philadelphia, Houston, and Los Angeles. Multivariate analysis…
Empirical Validation of Indices for Consideration in the Revision of Recommended Senior School Financial Accounting Textbooks in Southwestern Nigeria

ERIC Educational Resources Information Center

Oyetoro, Oyebode Stephen; Ojo, Oloyede Ezekiel

2017-01-01

The study determined a significant difference in teachers' overall evaluations of six recommended Financial Accounting Textbooks in Southwestern Nigeria. It also assessed the specific evaluation parameters that account for the difference. It adopted the survey research design. The multistage sampling technique was used to select a total of 80…
Measured Effect of Sexual Activities, Alcohol Consumption, Smoking and Aggression on Health Risk of Students in Rural Communities in Ikenne, Nigeria

ERIC Educational Resources Information Center

Ezeokoli, Rita; Ofole, Ndidi M.

2015-01-01

This study examined the joint and relative contribution of sexual activities, alcohol consumption, smoking and aggression to the prediction of health risk of students in rural communities in Ogun State. Descriptive research design of correlational type was adopted. Multi-stage sampling Technique was used to draw 300 respondents from an…
Statistical methods for efficient design of community surveys of response to noise: Random coefficients regression models

NASA Technical Reports Server (NTRS)

Tomberlin, T. J.

1985-01-01

Research studies of residents' responses to noise consist of interviews with samples of individuals who are drawn from a number of different compact study areas. The statistical techniques developed provide a basis for those sample design decisions. These techniques are suitable for a wide range of sample survey applications. A sample may consist of a random sample of residents selected from a sample of compact study areas, or in a more complex design, of a sample of residents selected from a sample of larger areas (e.g., cities). The techniques may be applied to estimates of the effects on annoyance of noise level, numbers of noise events, the time-of-day of the events, ambient noise levels, or other factors. Methods are provided for determining, in advance, how accurately these effects can be estimated for different sample sizes and study designs. Using a simple cost function, they also provide for optimum allocation of the sample across the stages of the design for estimating these effects. These techniques are developed via a regression model in which the regression coefficients are assumed to be random, with components of variance associated with the various stages of a multi-stage sample design.
[New design of the Health Survey of Catalonia (Spain, 2010-2014): a step forward in health planning and evaluation].

PubMed

Alcañiz-Zanón, Manuela; Mompart-Penina, Anna; Guillén-Estany, Montserrat; Medina-Bustos, Antonia; Aragay-Barbany, Josep M; Brugulat-Guiteras, Pilar; Tresserras-Gaju, Ricard

2014-01-01

This article presents the genesis of the Health Survey of Catalonia (Spain, 2010-2014) with its semiannual subsamples and explains the basic characteristics of its multistage sampling design. In comparison with previous surveys, the organizational advantages of this new statistical operation include rapid data availability and the ability to continuously monitor the population. The main benefits are timeliness in the production of indicators and the possibility of introducing new topics through the supplemental questionnaire as a function of needs. Limitations consist of the complexity of the sample design and the lack of longitudinal follow-up of the sample. Suitable sampling weights for each specific subsample are necessary for any statistical analysis of micro-data. Accuracy in the analysis of territorial disaggregation or population subgroups increases if annual samples are accumulated. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.
Forestry inventory based on multistage sampling with probability proportional to size

NASA Technical Reports Server (NTRS)

Lee, D. C. L.; Hernandez, P., Jr.; Shimabukuro, Y. E.

1983-01-01

A multistage sampling technique, with probability proportional to size, is developed for a forest volume inventory using remote sensing data. The LANDSAT data, Panchromatic aerial photographs, and field data are collected. Based on age and homogeneity, pine and eucalyptus classes are identified. Selection of tertiary sampling units is made through aerial photographs to minimize field work. The sampling errors for eucalyptus and pine ranged from 8.34 to 21.89 percent and from 7.18 to 8.60 percent, respectively.
ERTS data user investigation to develop a multistage forest sampling inventory system

NASA Technical Reports Server (NTRS)

Langley, P. G.; Vanroessel, J. W. (Principal Investigator)

1973-01-01

The author has identified the following significant results. A unique digital timber volume estimation system was developed for use with the MSS CCT tapes. The system was tested on a 64-square mile area in Northern California's Trinity Alps. The outcome of a systematic experiment, in which several possible combinations of bands 5 and 7 and a contrast measure were tried, showed that an estimated gain in precision of 50% can be obtained in a multistage sampling design. The difference between bands 5 and 7 proved to be of special importance for the estimation of biomass in the form of timber volume. In addition, an interpretation model for high flight U2 photographs was developed. A maximum multiple correlation coefficient of 0.74 was obtained for the regression model, explaining 55% of the variation in timber volume as estimated from aerial photos and ground measurments. An interpretation model for MSS color composites is in the testing stage.
Evaluation of usefulness of Skylab EREP S-190 and S-192 imagery in multistage forest surveys

NASA Technical Reports Server (NTRS)

Langley, P. G. (Principal Investigator)

1973-01-01

The author has identified the following significant results. A unique digital timber volume estimation system with digital data for two ERTS-1 MSS bands was tested. The system was tested on a 64-square mile area in Northern California's Trinity Alps. The outcome of a systematic experiment in which possible combinations of the two bands (MSS 5 and 7) were tried, showed than an estimated gain in precision of 50% can be obtained in a multistage sampling design. Especially the difference between the two bands proved to be of major importance for the estimation of biomass in the form of timber volume. Identical tests as the one performed will be conducted with various S-192 bands when the digital data become available.
Mars integrated transportation system multistage Mars mission

NASA Technical Reports Server (NTRS)

1991-01-01

In accordance with the objective of the Mars Integrated Transport System (MITS) program, the Multistage Mars Mission (MSMM) design team developed a profile for a manned mission to Mars. The purpose of the multistage mission is to send a crew of five astronauts to the martian surface by the year 2019. The mission continues man's eternal quest for exploration of new frontiers. This mission has a scheduled duration of 426 days that includes experimentation en route as well as surface exploration and experimentation. The MSMM is also designed as a foundation for a continuing program leading to the colonization of the planet Mars.
Handling Imbalanced Data Sets in Multistage Classification

NASA Astrophysics Data System (ADS)

López, M.

Multistage classification is a logical approach, based on a divide-and-conquer solution, for dealing with problems with a high number of classes. The classification problem is divided into several sequential steps, each one associated to a single classifier that works with subgroups of the original classes. In each level, the current set of classes is split into smaller subgroups of classes until they (the subgroups) are composed of only one class. The resulting chain of classifiers can be represented as a tree, which (1) simplifies the classification process by using fewer categories in each classifier and (2) makes it possible to combine several algorithms or use different attributes in each stage. Most of the classification algorithms can be biased in the sense of selecting the most populated class in overlapping areas of the input space. This can degrade a multistage classifier performance if the training set sample frequencies do not reflect the real prevalence in the population. Several techniques such as applying prior probabilities, assigning weights to the classes, or replicating instances have been developed to overcome this handicap. Most of them are designed for two-class (accept-reject) problems. In this article, we evaluate several of these techniques as applied to multistage classification and analyze how they can be useful for astronomy. We compare the results obtained by classifying a data set based on Hipparcos with and without these methods.
Purposeful sampling for qualitative data collection and analysis in mixed method implementation research

PubMed Central

Palinkas, Lawrence A.; Horwitz, Sarah M.; Green, Carla A.; Wisdom, Jennifer P.; Duan, Naihua; Hoagwood, Kimberly

2013-01-01

Purposeful sampling is widely used in qualitative research for the identification and selection of information-rich cases related to the phenomenon of interest. Although there are several different purposeful sampling strategies, criterion sampling appears to be used most commonly in implementation research. However, combining sampling strategies may be more appropriate to the aims of implementation research and more consistent with recent developments in quantitative methods. This paper reviews the principles and practice of purposeful sampling in implementation research, summarizes types and categories of purposeful sampling strategies and provides a set of recommendations for use of single strategy or multistage strategy designs, particularly for state implementation research. PMID:24193818
A Multi-Stage Longitudinal Comparative Design Stage II Evaluation of the Changing Lives Program: The Life Course Interview (RDA-LCI)

ERIC Educational Resources Information Center

Arango, Lisa Lewis; Kurtines, William M.; Montgomery, Marilyn J.; Ritchie, Rachel

2008-01-01

The study reported in this article, a Multi-Stage Longitudinal Comparative Design Stage II evaluation conducted as a planned preliminary efficacy evaluation (psychometric evaluation of measures, short-term controlled outcome studies, etc.) of the Changing Lives Program (CLP), provided evidence for the reliability and validity of the qualitative…
Development of a three-dimensional multistage inverse design method for aerodynamic matching of axial compressor blading

NASA Astrophysics Data System (ADS)

van Rooij, Michael P. C.

Current turbomachinery design systems increasingly rely on multistage Computational Fluid Dynamics (CFD) as a means to assess performance of designs. However, design weaknesses attributed to improper stage matching are addressed using often ineffective strategies involving a costly iterative loop between blading modification, revision of design intent, and evaluation of aerodynamic performance. A design methodology is presented which greatly improves the process of achieving design-point aerodynamic matching. It is based on a three-dimensional viscous inverse design method which generates the blade camber surface based on prescribed pressure loading, thickness distribution and stacking line. This inverse design method has been extended to allow blading analysis and design in a multi-blade row environment. Blade row coupling was achieved through a mixing plane approximation. Parallel computing capability in the form of MPI has been implemented to reduce the computational time for multistage calculations. Improvements have been made to the flow solver to reach the level of accuracy required for multistage calculations. These include inclusion of heat flux, temperature-dependent treatment of viscosity, and improved calculation of stress components and artificial dissipation near solid walls. A validation study confirmed that the obtained accuracy is satisfactory at design point conditions. Improvements have also been made to the inverse method to increase robustness and design fidelity. These include the possibility to exclude spanwise sections of the blade near the endwalls from the design process, and a scheme that adjusts the specified loading area for changes resulting from the leading and trailing edge treatment. Furthermore, a pressure loading manager has been developed. Its function is to automatically adjust the pressure loading area distribution during the design calculation in order to achieve a specified design objective. Possible objectives are overall mass flow and compression ratio, and radial distribution of exit flow angle. To supplement the loading manager, mass flow inlet and exit boundary conditions have been implemented. Through appropriate combination of pressure or mass flow inflow/outflow boundary conditions and loading manager objectives, increased control over the design intent can be obtained. The three-dimensional multistage inverse design method with pressure loading manager was demonstrated to offer greatly enhanced blade row matching capabilities. Multistage design allows for simultaneous design of blade rows in a mutually interacting environment, which permits the redesigned blading to adapt to changing aerodynamic conditions resulting from the redesign. This ensures that the obtained blading geometry and performance implied by the prescribed pressure loading distribution are consistent with operation in the multi-blade row environment. The developed methodology offers high aerodynamic design quality and productivity, and constitutes a significant improvement over existing approaches used to address design-point aerodynamic matching.
Performance Improvement of a Return Channel in a Multistage Centrifugal Compressor Using Multiobjective Optimization.

PubMed

Nishida, Yoshifumi; Kobayashi, Hiromi; Nishida, Hideo; Sugimura, Kazuyuki

2013-05-01

The effect of the design parameters of a return channel on the performance of a multistage centrifugal compressor was numerically investigated, and the shape of the return channel was optimized using a multiobjective optimization method based on a genetic algorithm to improve the performance of the centrifugal compressor. The results of sensitivity analysis using Latin hypercube sampling suggested that the inlet-to-outlet area ratio of the return vane affected the total pressure loss in the return channel, and that the inlet-to-outlet radius ratio of the return vane affected the outlet flow angle from the return vane. Moreover, this analysis suggested that the number of return vanes affected both the loss and the flow angle at the outlet. As a result of optimization, the number of return vane was increased from 14 to 22 and the area ratio was decreased from 0.71 to 0.66. The radius ratio was also decreased from 2.1 to 2.0. Performance tests on a centrifugal compressor with two return channels (the original design and optimized design) were carried out using two-stage test apparatus. The measured flow distribution exhibited a swirl flow in the center region and a reversed swirl flow near the hub and shroud sides. The exit flow of the optimized design was more uniform than that of the original design. For the optimized design, the overall two-stage efficiency and pressure coefficient were increased by 0.7% and 1.5%, respectively. Moreover, the second-stage efficiency and pressure coefficient were respectively increased by 1.0% and 3.2%. It is considered that the increase in the second-stage efficiency was caused by the increased uniformity of the flow, and the rise in the pressure coefficient was caused by a decrease in the residual swirl flow. It was thus concluded from the numerical and experimental results that the optimized return channel improved the performance of the multistage centrifugal compressor.
Multistage aerospace craft. [perspective drawings of conceptual design

NASA Technical Reports Server (NTRS)

Kelly, D. L. (Inventor)

1973-01-01

A conceptual design of a multi-stage aerospace craft is presented. Two perspective views of the vehicle are developed to show the two component configuration with delta wing, four vertical tail surfaces, tricycle landing gear, and two rocket exhaust nozzles at the rear of the fuselage. Engines for propulsion in the atmosphere are mounted on the fuselage in front of the wing root attachment.

Remote sensing-aided systems for snow qualification, evapotranspiration estimation, and their application in hydrologic models

NASA Technical Reports Server (NTRS)

Korram, S.

1977-01-01

The design of general remote sensing-aided methodologies was studied to provide the estimates of several important inputs to water yield forecast models. These input parameters are snow area extent, snow water content, and evapotranspiration. The study area is Feather River Watershed (780,000 hectares), Northern California. The general approach involved a stepwise sequence of identification of the required information, sample design, measurement/estimation, and evaluation of results. All the relevent and available information types needed in the estimation process are being defined. These include Landsat, meteorological satellite, and aircraft imagery, topographic and geologic data, ground truth data, and climatic data from ground stations. A cost-effective multistage sampling approach was employed in quantification of all the required parameters. The physical and statistical models for both snow quantification and evapotranspiration estimation was developed. These models use the information obtained by aerial and ground data through appropriate statistical sampling design.
Optimization of the propulsion for multistage solid rocket motor launchers

NASA Astrophysics Data System (ADS)

Calabro, M.; Dufour, A.; Macaire, A.

2002-02-01

Some tools focused on a rapid multidisciplinary optimization capability for multistage launch vehicle design were developed at EADS-LV. These tools may be broken down into two categories, those related to propulsion design optimization and a computer code devoted to trajectories and under constraints optimization. Both are linked in order to obtain optimal vehicle design after an iterative process. After a description of the two categories tools, an example of application is given on a small space launcher.
A Simulated Annealing Algorithm for the Optimization of Multistage Depressed Collector Efficiency

NASA Technical Reports Server (NTRS)

Vaden, Karl R.; Wilson, Jeffrey D.; Bulson, Brian A.

2002-01-01

The microwave traveling wave tube amplifier (TWTA) is widely used as a high-power transmitting source for space and airborne communications. One critical factor in designing a TWTA is the overall efficiency. However, overall efficiency is highly dependent upon collector efficiency; so collector design is critical to the performance of a TWTA. Therefore, NASA Glenn Research Center has developed an optimization algorithm based on Simulated Annealing to quickly design highly efficient multi-stage depressed collectors (MDC).
Modifications of ORNL's computer programs MSF-21 and VTE-21 for the evaluation and rapid optimization of multistage flash and vertical tube evaporators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glueckstern, P.; Wilson, J.V.; Reed, S.A.

1976-06-01

Design and cost modifications were made to ORNL's Computer Programs MSF-21 and VTE-21 originally developed for the rapid calculation and design optimization of multistage flash (MSF) and multieffect vertical tube evaporator (VTE) desalination plants. The modifications include additional design options to make possible the evaluation of desalting plants based on current technology (the original programs were based on conceptual designs applying advanced and not yet proven technological developments and design features) and new materials and equipment costs updated to mid-1975.
Design of the South East Asian Nutrition Survey (SEANUTS): a four-country multistage cluster design study.

PubMed

Schaafsma, Anne; Deurenberg, Paul; Calame, Wim; van den Heuvel, Ellen G H M; van Beusekom, Christien; Hautvast, Jo; Sandjaja; Bee Koon, Poh; Rojroongwasinkul, Nipa; Le Nguyen, Bao Khanh; Parikh, Panam; Khouw, Ilse

2013-09-01

Nutrition is a well-known factor in the growth, health and development of children. It is also acknowledged that worldwide many people have dietary imbalances resulting in over- or undernutrition. In 2009, the multinational food company FrieslandCampina initiated the South East Asian Nutrition Survey (SEANUTS), a combination of surveys carried out in Indonesia, Malaysia, Thailand and Vietnam, to get a better insight into these imbalances. The present study describes the general study design and methodology, as well as some problems and pitfalls encountered. In each of these countries, participants in the age range of 0·5-12 years were recruited according to a multistage cluster randomised or stratified random sampling methodology. Field teams took care of recruitment and data collection. For the health status of children, growth and body composition, physical activity, bone density, and development and cognition were measured. For nutrition, food intake and food habits were assessed by questionnaires, whereas in subpopulations blood and urine samples were collected to measure the biochemical status parameters of Fe, vitamins A and D, and DHA. In Thailand, the researchers additionally studied the lipid profile in blood, whereas in Indonesia iodine excretion in urine was analysed. Biochemical data were analysed in certified laboratories. Study protocols and methodology were aligned where practically possible. In December 2011, data collection was finalised. In total, 16,744 children participated in the present study. Information that will be very relevant for formulating nutritional health policies, as well as for designing innovative food and nutrition research and development programmes, has become available.
Multistage variable probability forest volume inventory. [Defiance Unit of the Navajo Nation in Arizona and Colorado

NASA Technical Reports Server (NTRS)

Anderson, J. E. (Principal Investigator)

1979-01-01

The net board foot volume (Scribner log rule) of the standing Ponderosa pine timber on the Defiance Unit of the Navajo Nation's forested land was estimated using a multistage forest volume inventory scheme with variable sample selection probabilities. The inventory designed to accomplish this task required that both LANDSAT MSS digital data and aircraft acquired data be used to locate one acre ground splits, which were subsequently visited by ground teams conducting detailed tree measurements using an optical dendrometer. The dendrometer measurements were then punched on computer input cards and were entered in a computer program developed by the U.S. Forest Service. The resulting individual tree volume estimates were then expanded through the use of a statistically defined equation to produce the volume estimate for the entire area which includes 192,026 acres and is approximately a 44% the total forested area of the Navajo Nation.
Low-Dead-Volume Inlet for Vacuum Chamber

NASA Technical Reports Server (NTRS)

Naylor, Guy; Arkin, C.

2010-01-01

Gas introduction from near-ambient pressures to high vacuum traditionally is accomplished either by multi-stage differential pumping that allows for very rapid response, or by a capillary method that allows for a simple, single-stage introduction, but which often has a delayed response. Another means to introduce the gas sample is to use the multi-stage design with only a single stage. This is accomplished by using a very small conductance limit. The problem with this method is that a small conductance limit will amplify issues associated with dead -volume. As a result, a high -vacuum gas inlet was developed with low dead -volume, allowing the use of a very low conductance limit interface. Gas flows through the ConFlat flange at a relatively high flow rate at orders of magnitude greater than through the conductance limit. The small flow goes through a conductance limit that is a double-sided ConFlat.
Low-Dead-Volume Inlet for Vacuum Chamber

NASA Technical Reports Server (NTRS)

Naylor, Guy; Arkin, C.

2011-01-01

Gas introduction from near-ambient pressures to high vacuum traditionally is accomplished either by multi-stage differential pumping that allows for very rapid response, or by a capillary method that allows for a simple, single-stage introduction, but which often has a delayed response. Another means to introduce the gas sample is to use the multi-stage design with only a single stage. This is accomplished by using a very small conductance limit. The problem with this method is that a small conductance limit will amplify issues associated with dead-volume. As a result, a high-vacuum gas inlet was developed with low dead-volume, allowing the use of a very low conductance limit interface. Gas flows through the ConFlat flange at a relatively high flow rate at orders of magnitude greater than through the conductance limit. The small flow goes through a conductance limit that is a double-sided ConFlat.
Multistage Polymeric Lens Structures Integrated into Silica Waveguides

NASA Astrophysics Data System (ADS)

Tate, Atsushi; Suzuki, Takanori; Tsuda, Hiroyuki

2006-08-01

A waveguide lens, composed of multistage polymer-filled thin grooves in a silica planar lightwave circuit (PLC) is proposed and a low-loss structure has been designed. A waveguide lens in a silica slab waveguide has been fabricated using reactive ion etching (RIE) and formed by filling with polymer. Both an imagding optical system and a Fourier-transform optical system can be configured in a PLC using a waveguide lens. It renders the PLC functional and its design flexible. To obtain a shorter focal length with a low insertion loss, it is more effective to use a multistage lens structure. An imaging optical system and a Fourier-transform optical system with a focal length of less than 1000 μm were fabricated in silica waveguides using a multistage lens structure. The lens imaging waveguides incorporate a 16-24-stage lens, with insertion losses of 4-7 dB. A 4 × 4 optical coupler, using a Fourier-transform optical system, utilizes a 6-stage lens with losses of 2-4 dB.
Microfiltration of thin stillage: Process simulation and economic analyses

USDA-ARS?s Scientific Manuscript database

In plant scale operations, multistage membrane systems have been adopted for cost minimization. We considered design optimization and operation of a continuous microfiltration (MF) system for the corn dry grind process. The objectives were to develop a model to simulate a multistage MF system, optim...
Conditional statistical inference with multistage testing designs.

PubMed

Zwitser, Robert J; Maris, Gunter

2015-03-01

In this paper it is demonstrated how statistical inference from multistage test designs can be made based on the conditional likelihood. Special attention is given to parameter estimation, as well as the evaluation of model fit. Two reasons are provided why the fit of simple measurement models is expected to be better in adaptive designs, compared to linear designs: more parameters are available for the same number of observations; and undesirable response behavior, like slipping and guessing, might be avoided owing to a better match between item difficulty and examinee proficiency. The results are illustrated with simulated data, as well as with real data.
[Design of the National Surveillance of Nutritional Indicators (MONIN), Peru 2007-2010].

PubMed

Campos-Sánchez, Miguel; Ricaldi-Sueldo, Rita; Miranda-Cuadros, Marianella

2011-06-01

To describe the design and methods of the national surveillance of nutritional indicators (MONIN) 2007-2010, carried out by INS/CENAN. MONIN was designed as a continuous (repeated cross-sectional) survey, with stratified multi-stage random sampling, considering the universe as all under five children and pregnant women residing in Peru, divided into 5 geographical strata and 6 trimesters (randomly permuted weeks, about 78% of the time between November 19, 2007 and April 2, 2010). The total sample was 3,827 children in 361 completed clusters. The dropout rate was 8.4% in clusters, 1.8% in houses, and 13.2% in households. Dropout was also 4.2, 13.3, 21.2, 55% and 29% in anthropometry, hemoglobin, food intake, retinol and ioduria measurements, respectively. The MONIN design is feasible and useful for the estimation of indicators of childhood malnutrition.
The Empirical Selection of Anchor Items Using a Multistage Approach

ERIC Educational Resources Information Center

Craig, Brandon

2017-01-01

The purpose of this study was to determine if using a multistage approach for the empirical selection of anchor items would lead to more accurate DIF detection rates than the anchor selection methods proposed by Kopf, Zeileis, & Strobl (2015b). A simulation study was conducted in which the sample size, percentage of DIF, and balance of DIF…
SSAIS: A Program to Assess Adverse Impact in Multistage Selection Decisions

ERIC Educational Resources Information Center

De Corte, Wilfried

2004-01-01

The article describes a Windows program to estimate the expected value and sampling distribution function of the adverse impact ratio for general multistage selections. The results of the program can also be used to predict the risk that a future selection decision will result in an outcome that reflects the presence of adverse impact. The method…
Designing a multi-objective, multi-support accuracy assessment of the 2001 National Land Cover Data (NLCD 2001) of the conterminous United States

USGS Publications Warehouse

Stehman, S.V.; Wickham, J.D.; Wade, T.G.; Smith, J.H.

2008-01-01

The database design and diverse application of NLCD 2001 pose significant challenges for accuracy assessment because numerous objectives are of interest, including accuracy of land-cover, percent urban imperviousness, percent tree canopy, land-cover composition, and net change. A multi-support approach is needed because these objectives require spatial units of different sizes for reference data collection and analysis. Determining a sampling design that meets the full suite of desirable objectives for the NLCD 2001 accuracy assessment requires reconciling potentially conflicting design features that arise from targeting the different objectives. Multi-stage cluster sampling provides the general structure to achieve a multi-support assessment, and the flexibility to target different objectives at different stages of the design. We describe the implementation of two-stage cluster sampling for the initial phase of the NLCD 2001 assessment, and identify gaps in existing knowledge where research is needed to allow full implementation of a multi-objective, multi-support assessment. ?? 2008 American Society for Photogrammetry and Remote Sensing.
Planning Risk-Based SQC Schedules for Bracketed Operation of Continuous Production Analyzers.

PubMed

Westgard, James O; Bayat, Hassan; Westgard, Sten A

2018-02-01

To minimize patient risk, "bracketed" statistical quality control (SQC) is recommended in the new CLSI guidelines for SQC (C24-Ed4). Bracketed SQC requires that a QC event both precedes and follows (brackets) a group of patient samples. In optimizing a QC schedule, the frequency of QC or run size becomes an important planning consideration to maintain quality and also facilitate responsive reporting of results from continuous operation of high production analytic systems. Different plans for optimizing a bracketed SQC schedule were investigated on the basis of Parvin's model for patient risk and CLSI C24-Ed4's recommendations for establishing QC schedules. A Sigma-metric run size nomogram was used to evaluate different QC schedules for processes of different sigma performance. For high Sigma performance, an effective SQC approach is to employ a multistage QC procedure utilizing a "startup" design at the beginning of production and a "monitor" design periodically throughout production. Example QC schedules are illustrated for applications with measurement procedures having 6-σ, 5-σ, and 4-σ performance. Continuous production analyzers that demonstrate high σ performance can be effectively controlled with multistage SQC designs that employ a startup QC event followed by periodic monitoring or bracketing QC events. Such designs can be optimized to minimize the risk of harm to patients. © 2017 American Association for Clinical Chemistry.
Users manual for updated computer code for axial-flow compressor conceptual design

NASA Technical Reports Server (NTRS)

Glassman, Arthur J.

1992-01-01

An existing computer code that determines the flow path for an axial-flow compressor either for a given number of stages or for a given overall pressure ratio was modified for use in air-breathing engine conceptual design studies. This code uses a rapid approximate design methodology that is based on isentropic simple radial equilibrium. Calculations are performed at constant-span-fraction locations from tip to hub. Energy addition per stage is controlled by specifying the maximum allowable values for several aerodynamic design parameters. New modeling was introduced to the code to overcome perceived limitations. Specific changes included variable rather than constant tip radius, flow path inclination added to the continuity equation, input of mass flow rate directly rather than indirectly as inlet axial velocity, solution for the exact value of overall pressure ratio rather than for any value that met or exceeded it, and internal computation of efficiency rather than the use of input values. The modified code was shown to be capable of computing efficiencies that are compatible with those of five multistage compressors and one fan that were tested experimentally. This report serves as a users manual for the revised code, Compressor Spanline Analysis (CSPAN). The modeling modifications, including two internal loss correlations, are presented. Program input and output are described. A sample case for a multistage compressor is included.
The usefulness of Skylab/EREP S-190 and S-192 imagery in multistage forest surveys

NASA Technical Reports Server (NTRS)

Langley, P. G.; Vanroessel, J. (Principal Investigator)

1976-01-01

The author has identified the following significant results. The RMSE of point location achieved with the annotation system on S190A imagery was 100 m and 90 m in the x and y direction, respectively. Potential gains in sampling precision attributable to space derived imagery ranged from 4.9 to 43.3 percent depending on the image type, interpretation method, time of year, and sampling method applied. Seasonal variation was significant. S190A products obtained in September yielded higher gains than those obtained in June. Using 100 primary sample units as a base under simple random sampling, the revenue made available for incorporating space acquired data into the sample design to estimate timber volume was as high as $39,400.00.
Design and experimental evaluation of compact radial-inflow turbines

NASA Technical Reports Server (NTRS)

Fredmonski, A. J.; Huber, F. W.; Roelke, R. J.; Simonyi, S.

1991-01-01

The application of a multistage 3D Euler solver to the aerodynamic design of two compact radial-inflow turbines is presented, along with experimental results evaluating and validating the designs. The objectives of the program were to design, fabricate, and rig test compact radial-inflow turbines with equal or better efficiency relative to conventional designs, while having 40 percent less rotor length than current traditionally-sized radial turbines. The approach to achieving these objectives was to apply a calibrated 3D multistage Euler code to accurately predict and control the high rotor flow passage velocities and high aerodynamic loadings resulting from the reduction in rotor length. A comparison of the advanced compact designs to current state-of-the-art configurations is presented.
New generation of universal modeling for centrifugal compressors calculation

NASA Astrophysics Data System (ADS)

Galerkin, Y.; Drozdov, A.

2015-08-01

The Universal Modeling method is in constant use from mid - 1990th. Below is presented the newest 6th version of the Method. The flow path configuration of 3D impellers is presented in details. It is possible to optimize meridian configuration including hub/shroud curvatures, axial length, leading edge position, etc. The new model of vaned diffuser includes flow non-uniformity coefficient based on CFD calculations. The loss model was built from the results of 37 experiments with compressors stages of different flow rates and loading factors. One common set of empirical coefficients in the loss model guarantees the efficiency definition within an accuracy of 0.86% at the design point and 1.22% along the performance curve. The model verification was made. Four multistage compressors performances with vane and vaneless diffusers were calculated. As the model verification was made, four multistage compressors performances with vane and vaneless diffusers were calculated. Two of these compressors have quite unusual flow paths. The modeling results were quite satisfactory in spite of these peculiarities. One sample of the verification calculations is presented in the text. This 6th version of the developed computer program is being already applied successfully in the design practice.

Patient-centred screening for primary immunodeficiency: a multi-stage diagnostic protocol designed for non-immunologists

PubMed Central

de Vries, E

2006-01-01

Efficient early identification of primary immunodeficiency disease (PID) is important for prognosis, but is not an easy task for non-immunologists. The Clinical Working Party of the European Society for Immunodeficiencies (ESID) has composed a multi-stage diagnostic protocol that is based on expert opinion, in order to increase the awareness of PID among doctors working in different fields. The protocol starts from the clinical presentation of the patient; immunological skills are not needed for its use. The multi-stage design allows cost-effective screening for PID within the large pool of potential cases in all hospitals in the early phases, while more expensive tests are reserved for definitive classification in collaboration with an immunologist at a later stage. Although many PIDs present in childhood, others may present at any age. The protocols presented here are therefore aimed at both adult physicians and paediatricians. While designed for use throughout Europe, there will be national differences which may make modification of this generic algorithm necessary. PMID:16879238
Phase-I monitoring of standard deviations in multistage linear profiles

NASA Astrophysics Data System (ADS)

Kalaei, Mahdiyeh; Soleimani, Paria; Niaki, Seyed Taghi Akhavan; Atashgar, Karim

2018-03-01

In most modern manufacturing systems, products are often the output of some multistage processes. In these processes, the stages are dependent on each other, where the output quality of each stage depends also on the output quality of the previous stages. This property is called the cascade property. Although there are many studies in multistage process monitoring, there are fewer works on profile monitoring in multistage processes, especially on the variability monitoring of a multistage profile in Phase-I for which no research is found in the literature. In this paper, a new methodology is proposed to monitor the standard deviation involved in a simple linear profile designed in Phase I to monitor multistage processes with the cascade property. To this aim, an autoregressive correlation model between the stages is considered first. Then, the effect of the cascade property on the performances of three types of T 2 control charts in Phase I with shifts in standard deviation is investigated. As we show that this effect is significant, a U statistic is next used to remove the cascade effect, based on which the investigated control charts are modified. Simulation studies reveal good performances of the modified control charts.
An Investigation on Computer-Adaptive Multistage Testing Panels for Multidimensional Assessment

ERIC Educational Resources Information Center

Wang, Xinrui

2013-01-01

The computer-adaptive multistage testing (ca-MST) has been developed as an alternative to computerized adaptive testing (CAT), and been increasingly adopted in large-scale assessments. Current research and practice only focus on ca-MST panels for credentialing purposes. The ca-MST test mode, therefore, is designed to gauge a single scale. The…
A Fair Comparison of the Performance of Computerized Adaptive Testing and Multistage Adaptive Testing

ERIC Educational Resources Information Center

Wang, Keyin

2017-01-01

The comparison of item-level computerized adaptive testing (CAT) and multistage adaptive testing (MST) has been researched extensively (e.g., Kim & Plake, 1993; Luecht et al., 1996; Patsula, 1999; Jodoin, 2003; Hambleton & Xing, 2006; Keng, 2008; Zheng, 2012). Various CAT and MST designs have been investigated and compared under the same…
A Comparison of IRT Proficiency Estimation Methods under Adaptive Multistage Testing

ERIC Educational Resources Information Center

Kim, Sooyeon; Moses, Tim; Yoo, Hanwook

2015-01-01

This inquiry is an investigation of item response theory (IRT) proficiency estimators' accuracy under multistage testing (MST). We chose a two-stage MST design that includes four modules (one at Stage 1, three at Stage 2) and three difficulty paths (low, middle, high). We assembled various two-stage MST panels (i.e., forms) by manipulating two…
An assessment of Lot Quality Assurance Sampling to evaluate malaria outcome indicators: extending malaria indicator surveys.

PubMed

Biedron, Caitlin; Pagano, Marcello; Hedt, Bethany L; Kilian, Albert; Ratcliffe, Amy; Mabunda, Samuel; Valadez, Joseph J

2010-02-01

Large investments and increased global prioritization of malaria prevention and treatment have resulted in greater emphasis on programme monitoring and evaluation (M&E) in many countries. Many countries currently use large multistage cluster sample surveys to monitor malaria outcome indicators on a regional and national level. However, these surveys often mask local-level variability important to programme management. Lot Quality Assurance Sampling (LQAS) has played a valuable role for local-level programme M&E. If incorporated into these larger surveys, it would provide a comprehensive M&E plan at little, if any, extra cost. The Mozambique Ministry of Health conducted a Malaria Indicator Survey (MIS) in June and July 2007. We applied LQAS classification rules to the 345 sampled enumeration areas to demonstrate identifying high- and low-performing areas with respect to two malaria program indicators-'household possession of any bednet' and 'household possession of any insecticide-treated bednet (ITN)'. As shown by the MIS, no province in Mozambique achieved the 70% coverage target for household possession of bednets or ITNs. By applying LQAS classification rules to the data, we identify 266 of the 345 enumeration areas as having bednet coverage severely below the 70% target. An additional 73 were identified with low ITN coverage. This article demonstrates the feasibility of integrating LQAS into multistage cluster sampling surveys and using these results to support a comprehensive national, regional and local programme M&E system. Furthermore, in the recommendations we outlined how to integrate the Large Country-LQAS design into macro-surveys while still obtaining results available through current sampling practices.
Fashion sketch design by interactive genetic algorithms

NASA Astrophysics Data System (ADS)

Mok, P. Y.; Wang, X. X.; Xu, J.; Kwok, Y. L.

2012-11-01

Computer aided design is vitally important for the modern industry, particularly for the creative industry. Fashion industry faced intensive challenges to shorten the product development process. In this paper, a methodology is proposed for sketch design based on interactive genetic algorithms. The sketch design system consists of a sketch design model, a database and a multi-stage sketch design engine. First, a sketch design model is developed based on the knowledge of fashion design to describe fashion product characteristics by using parameters. Second, a database is built based on the proposed sketch design model to define general style elements. Third, a multi-stage sketch design engine is used to construct the design. Moreover, an interactive genetic algorithm (IGA) is used to accelerate the sketch design process. The experimental results have demonstrated that the proposed method is effective in helping laypersons achieve satisfied fashion design sketches.
Patient-centred screening for primary immunodeficiency, a multi-stage diagnostic protocol designed for non-immunologists: 2011 update

PubMed Central

de Vries, E

2012-01-01

Members of the European Society for Immunodeficiencies (ESID) and other colleagues have updated the multi-stage expert-opinion-based diagnostic protocol for non-immunologists incorporating newly defined primary immunodeficiency diseases (PIDs). The protocol presented here aims to increase the awareness of PIDs among doctors working in different fields. Prompt identification of PID is important for prognosis, but this may not be an easy task. The protocol therefore starts from the clinical presentation of the patient. Because PIDs may present at all ages, this protocol is aimed at both adult and paediatric physicians. The multi-stage design allows cost-effective screening for PID of the large number of potential cases in the early phases, with more expensive tests reserved for definitive classification in collaboration with a specialist in the field of immunodeficiency at a later stage. PMID:22132890
Development of design technique for vacuum insulation in large size multi-aperture multi-grid accelerator for nuclear fusion.

PubMed

Kojima, A; Hanada, M; Tobari, H; Nishikiori, R; Hiratsuka, J; Kashiwagi, M; Umeda, N; Yoshida, M; Ichikawa, M; Watanabe, K; Yamano, Y; Grisham, L R

2016-02-01

Design techniques for the vacuum insulation have been developed in order to realize a reliable voltage holding capability of multi-aperture multi-grid (MAMuG) accelerators for fusion application. In this method, the nested multi-stage configuration of the MAMuG accelerator can be uniquely designed to satisfy the target voltage within given boundary conditions. The evaluation of the voltage holding capabilities of each acceleration stages was based on the previous experimental results about the area effect and the multi-aperture effect. Since the multi-grid effect was found to be the extension of the area effect by the total facing area this time, the total voltage holding capability of the multi-stage can be estimated from that per single stage by assuming the stage with the highest electric field, the total facing area, and the total apertures. By applying these consideration, the analysis on the 3-stage MAMuG accelerator for JT-60SA agreed well with the past gap-scan experiments with an accuracy of less than 10% variation, which demonstrated the high reliability to design MAMuG accelerators and also multi-stage high voltage bushings.
Development of design technique for vacuum insulation in large size multi-aperture multi-grid accelerator for nuclear fusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kojima, A., E-mail: kojima.atsushi@jaea.go.jp; Hanada, M.; Tobari, H.

Design techniques for the vacuum insulation have been developed in order to realize a reliable voltage holding capability of multi-aperture multi-grid (MAMuG) accelerators for fusion application. In this method, the nested multi-stage configuration of the MAMuG accelerator can be uniquely designed to satisfy the target voltage within given boundary conditions. The evaluation of the voltage holding capabilities of each acceleration stages was based on the previous experimental results about the area effect and the multi-aperture effect. Since the multi-grid effect was found to be the extension of the area effect by the total facing area this time, the total voltagemore » holding capability of the multi-stage can be estimated from that per single stage by assuming the stage with the highest electric field, the total facing area, and the total apertures. By applying these consideration, the analysis on the 3-stage MAMuG accelerator for JT-60SA agreed well with the past gap-scan experiments with an accuracy of less than 10% variation, which demonstrated the high reliability to design MAMuG accelerators and also multi-stage high voltage bushings.« less
TADS: A CFD-Based Turbomachinery Analysis and Design System with GUI: Methods and Results. 2.0

NASA Technical Reports Server (NTRS)

Koiro, M. J.; Myers, R. A.; Delaney, R. A.

1999-01-01

The primary objective of this study was the development of a Computational Fluid Dynamics (CFD) based turbomachinery airfoil analysis and design system, controlled by a Graphical User Interface (GUI). The computer codes resulting from this effort are referred to as TADS (Turbomachinery Analysis and Design System). This document is the Final Report describing the theoretical basis and analytical results from the TADS system developed under Task 10 of NASA Contract NAS3-27394, ADPAC System Coupling to Blade Analysis & Design System GUI, Phase II-Loss, Design and. Multi-stage Analysis. TADS couples a throughflow solver (ADPAC) with a quasi-3D blade-to-blade solver (RVCQ3D) or a 3-D solver with slip condition on the end walls (B2BADPAC) in an interactive package. Throughflow analysis and design capability was developed in ADPAC through the addition of blade force and blockage terms to the governing equations. A GUI was developed to simplify user input and automate the many tasks required to perform turbomachinery analysis and design. The coupling of the various programs was done in such a way that alternative solvers or grid generators could be easily incorporated into the TADS framework. Results of aerodynamic calculations using the TADS system are presented for a multistage compressor, a multistage turbine, two highly loaded fans, and several single stage compressor and turbine example cases.
Axial and Centrifugal Compressor Mean Line Flow Analysis Method

NASA Technical Reports Server (NTRS)

Veres, Joseph P.

2009-01-01

This paper describes a method to estimate key aerodynamic parameters of single and multistage axial and centrifugal compressors. This mean-line compressor code COMDES provides the capability of sizing single and multistage compressors quickly during the conceptual design process. Based on the compressible fluid flow equations and the Euler equation, the code can estimate rotor inlet and exit blade angles when run in the design mode. The design point rotor efficiency and stator losses are inputs to the code, and are modeled at off design. When run in the off-design analysis mode, it can be used to generate performance maps based on simple models for losses due to rotor incidence and inlet guide vane reset angle. The code can provide an improved understanding of basic aerodynamic parameters such as diffusion factor, loading levels and incidence, when matching multistage compressor blade rows at design and at part-speed operation. Rotor loading levels and relative velocity ratio are correlated to the onset of compressor surge. NASA Stage 37 and the three-stage NASA 74-A axial compressors were analyzed and the results compared to test data. The code has been used to generate the performance map for the NASA 76-B three-stage axial compressor featuring variable geometry. The compressor stages were aerodynamically matched at off-design speeds by adjusting the variable inlet guide vane and variable stator geometry angles to control the rotor diffusion factor and incidence angles.
The design and development of transonic multistage compressors

NASA Technical Reports Server (NTRS)

Ball, C. L.; Steinke, R. J.; Newman, F. A.

1988-01-01

The development of the transonic multistage compressor is reviewed. Changing trends in design and performance parameters are noted. These changes are related to advances in compressor aerodynamics, computational fluid mechanics and other enabling technologies. The parameters normally given to the designer and those that need to be established during the design process are identified. Criteria and procedures used in the selection of these parameters are presented. The selection of tip speed, aerodynamic loading, flowpath geometry, incidence and deviation angles, blade/vane geometry, blade/vane solidity, stage reaction, aerodynamic blockage, inlet flow per unit annulus area, stage/overall velocity ratio, and aerodynamic losses are considered. Trends in these parameters both spanwise and axially through the machine are highlighted. The effects of flow mixing and methods for accounting for the mixing in the design process are discussed.
Study on casing treatment and stator matching on multistage fan

NASA Astrophysics Data System (ADS)

Wu, Chuangliang; Yuan, Wei; Deng, Zhe

2017-10-01

Casing treatments are required for expanding the stall margin of multi-stage high-load turbofans designed with high blade-tip Mach numbers and high leakage flow. In the case of a low mass flow, the casing treatment effectively reduces the blockages caused by the leakage flow and enlarges the stall margin. However, in the case of a high mass flow, the casing treatment affects the overall flow capacity of the fan, the thrust when operating at the high speeds usually required by design-point specifications. Herein, we study a two-stage high-load fan with three-dimensional numerical simulations. We use the simulation results to propose a scheme that enlarges the stall margin of multistage high-load fans without sacrificing the flow capacity when operating with a large mass flow. Furthermore, a circumferential groove casing treatment is used and adjustments are made to the upstream stator angle to match the casing treatment. The stall margin is thus increased to 16.3%, with no reduction in the maximum mass flow rate or the design thrust performance.
Performance of NACA Eight-stage Axial-flow Compressor Designed on the Basis of Airfoil Theory

NASA Technical Reports Server (NTRS)

Sinnette, John T; Schey, Oscar W; King, J Austin

1943-01-01

The NACA has conducted an investigation to determine the performance that can be obtained from a multistage axial-flow compressor based on airfoil research. A theory was developed; an eight-stage axial-flow compressor was designed, constructed, and tested. The performance of the compressor was determined for speeds from 5000 to 14,000 r.p.m with varying air flow at each speed. Most of the tests were made with air at room temperature. The performance was determined in accordance with the Committee's recommended procedure for testing superchargers. The expected performance was obtained, showing that a multistage compressor of high efficiency can be designed by the application of airfoil theory.
An assessment of Lot Quality Assurance Sampling to evaluate malaria outcome indicators: extending malaria indicator surveys

PubMed Central

Biedron, Caitlin; Pagano, Marcello; Hedt, Bethany L; Kilian, Albert; Ratcliffe, Amy; Mabunda, Samuel; Valadez, Joseph J

2010-01-01

Background Large investments and increased global prioritization of malaria prevention and treatment have resulted in greater emphasis on programme monitoring and evaluation (M&E) in many countries. Many countries currently use large multistage cluster sample surveys to monitor malaria outcome indicators on a regional and national level. However, these surveys often mask local-level variability important to programme management. Lot Quality Assurance Sampling (LQAS) has played a valuable role for local-level programme M&E. If incorporated into these larger surveys, it would provide a comprehensive M&E plan at little, if any, extra cost. Methods The Mozambique Ministry of Health conducted a Malaria Indicator Survey (MIS) in June and July 2007. We applied LQAS classification rules to the 345 sampled enumeration areas to demonstrate identifying high- and low-performing areas with respect to two malaria program indicators—‘household possession of any bednet’ and ‘household possession of any insecticide-treated bednet (ITN)’. Results As shown by the MIS, no province in Mozambique achieved the 70% coverage target for household possession of bednets or ITNs. By applying LQAS classification rules to the data, we identify 266 of the 345 enumeration areas as having bednet coverage severely below the 70% target. An additional 73 were identified with low ITN coverage. Conclusions This article demonstrates the feasibility of integrating LQAS into multistage cluster sampling surveys and using these results to support a comprehensive national, regional and local programme M&E system. Furthermore, in the recommendations we outlined how to integrate the Large Country-LQAS design into macro-surveys while still obtaining results available through current sampling practices. PMID:20139435
Design study and performance analysis of a high-speed multistage variable-geometry fan for a variable cycle engine

NASA Technical Reports Server (NTRS)

Sullivan, T. J.; Parker, D. E.

1979-01-01

A design technology study was performed to identify a high speed, multistage, variable geometry fan configuration capable of achieving wide flow modulation with near optimum efficiency at the important operating condition. A parametric screening study of the front and rear block fans was conducted in which the influence of major fan design features on weight and efficiency was determined. Key design parameters were varied systematically to determine the fan configuration most suited for a double bypass, variable cycle engine. Two and three stage fans were considered for the front block. A single stage, core driven fan was studied for the rear block. Variable geometry concepts were evaluated to provide near optimum off design performance. A detailed aerodynamic design and a preliminary mechanical design were carried out for the selected fan configuration. Performance predictions were made for the front and rear block fans.
A Bayesian multi-stage cost-effectiveness design for animal studies in stroke research

PubMed Central

Cai, Chunyan; Ning, Jing; Huang, Xuelin

2017-01-01

Much progress has been made in the area of adaptive designs for clinical trials. However, little has been done regarding adaptive designs to identify optimal treatment strategies in animal studies. Motivated by an animal study of a novel strategy for treating strokes, we propose a Bayesian multi-stage cost-effectiveness design to simultaneously identify the optimal dose and determine the therapeutic treatment window for administrating the experimental agent. We consider a non-monotonic pattern for the dose-schedule-efficacy relationship and develop an adaptive shrinkage algorithm to assign more cohorts to admissible strategies. We conduct simulation studies to evaluate the performance of the proposed design by comparing it with two standard designs. These simulation studies show that the proposed design yields a significantly higher probability of selecting the optimal strategy, while it is generally more efficient and practical in terms of resource usage. PMID:27405325
Multistage Adaptive Testing for a Large-Scale Classification Test: Design, Heuristic Assembly, and Comparison with Other Testing Modes. ACT Research Report Series, 2012 (6)

ERIC Educational Resources Information Center

Zheng, Yi; Nozawa, Yuki; Gao, Xiaohong; Chang, Hua-Hua

2012-01-01

Multistage adaptive tests (MSTs) have gained increasing popularity in recent years. MST is a balanced compromise between linear test forms (i.e., paper-and-pencil testing and computer-based testing) and traditional item-level computer-adaptive testing (CAT). It combines the advantages of both. On one hand, MST is adaptive (and therefore more…
Performance Evaluation of Reduced-Chord Rotor Blading as Applied to J73 Two-Stage Turbine

NASA Technical Reports Server (NTRS)

Schurn, Harold J.

1957-01-01

The multistage turbine from the J73 turbojet engine has previously been investigated with standard and with reduced-chord rotor blading in order to determine the individual performance characteristics of each configuration over a range of over-all pressure ratio and speed. Because both turbine configurations exhibited peak efficiencies of over 90 percent, and because both units had relatively wide efficient operating ranges, it was considered of interest to determine the performance of the first stage of the turbine as a separate component. Accordingly, the standard-bladed multistage turbine was modified by removing the second-stage rotor disk and stator and altering the flow passage so that the first stage of the unit could be operated independently. The modified single-stage turbine was then operated over a range of stage pressure ratio and speed. The single-stage turbine operated at a peak brake internal efficiency of over 90 percent at an over-all stage pressure ratio of 1.4 and at 90 percent of design equivalent speed. Furthermore, the unit operated at high efficiencies over a relatively wide operating range. When the single-stage results were compared with the multistage results at the design operating point, it was found that the first stage produced approximately half the total multistage-turbine work output.

Forest inventory using multistage sampling with probability proportional to size. [Brazil

NASA Technical Reports Server (NTRS)

Parada, N. D. J. (Principal Investigator); Lee, D. C. L.; Hernandezfilho, P.; Shimabukuro, Y. E.; Deassis, O. R.; Demedeiros, J. S.

1984-01-01

A multistage sampling technique, with probability proportional to size, for forest volume inventory using remote sensing data is developed and evaluated. The study area is located in the Southeastern Brazil. The LANDSAT 4 digital data of the study area are used in the first stage for automatic classification of reforested areas. Four classes of pine and eucalypt with different tree volumes are classified utilizing a maximum likelihood classification algorithm. Color infrared aerial photographs are utilized in the second stage of sampling. In the third state (ground level) the time volume of each class is determined. The total time volume of each class is expanded through a statistical procedure taking into account all the three stages of sampling. This procedure results in an accurate time volume estimate with a smaller number of aerial photographs and reduced time in field work.
How quantitative measures unravel design principles in multi-stage phosphorylation cascades.

PubMed

Frey, Simone; Millat, Thomas; Hohmann, Stefan; Wolkenhauer, Olaf

2008-09-07

We investigate design principles of linear multi-stage phosphorylation cascades by using quantitative measures for signaling time, signal duration and signal amplitude. We compare alternative pathway structures by varying the number of phosphorylations and the length of the cascade. We show that a model for a weakly activated pathway does not reflect the biological context well, unless it is restricted to certain parameter combinations. Focusing therefore on a more general model, we compare alternative structures with respect to a multivariate optimization criterion. We test the hypothesis that the structure of a linear multi-stage phosphorylation cascade is the result of an optimization process aiming for a fast response, defined by the minimum of the product of signaling time and signal duration. It is then shown that certain pathway structures minimize this criterion. Several popular models of MAPK cascades form the basis of our study. These models represent different levels of approximation, which we compare and discuss with respect to the quantitative measures.
Removal of CO2 in a multistage fluidized bed reactor by diethanol amine impregnated activated carbon.

PubMed

Das, Dipa; Samal, Debi Prasad; Meikap, Bhim C

2016-07-28

To mitigate the emission of carbon dioxide (CO2), we have developed and designed a four-stage fluidized bed reactor. There is a counter current exchange between solid adsorbent and gas flow. In this present investigation diethanol amine (DEA) impregnated activated carbon made from green coconut shell was used as adsorbent. This type of adsorbent not only adsorbs CO2 due to the presence of pore but also chemically reacts with CO2 and form secondary zwitterions. Sampling and analysis of CO2 was performed using Orsat apparatus. The effect of initial CO2 concentration, gas velocity, solid rate, weir height etc. on removal efficiency of CO2 have been investigated and presented. The percentage removal of CO2 has been found close to 80% under low gas flow rate (0.188 m/s), high solid flow rate (4.12 kg/h) and weir height of 50 mm. From this result it has been found out that multistage fluidized bed reactor may be a suitable equipment for removal of CO2 from flue gas.
Effectiveness of Item Response Theory (IRT) Proficiency Estimation Methods under Adaptive Multistage Testing. Research Report. ETS RR-15-11

ERIC Educational Resources Information Center

Kim, Sooyeon; Moses, Tim; Yoo, Hanwook Henry

2015-01-01

The purpose of this inquiry was to investigate the effectiveness of item response theory (IRT) proficiency estimators in terms of estimation bias and error under multistage testing (MST). We chose a 2-stage MST design in which 1 adaptation to the examinees' ability levels takes place. It includes 4 modules (1 at Stage 1, 3 at Stage 2) and 3 paths…
Randomized branch sampling

Treesearch

Harry T. Valentine

2002-01-01

Randomized branch sampling (RBS) is a special application of multistage probability sampling (see Sampling, environmental), which was developed originally by Jessen [3] to estimate fruit counts on individual orchard trees. In general, the method can be used to obtain estimates of many different attributes of trees or other branched plants. The usual objective of RBS is...
A multi-stage oil-water-separating process design for the sea oil spill recovery robot

NASA Astrophysics Data System (ADS)

Zhang, Min-ge; Wu, Jian-guo; Lin, Xinhua; Wang, Xiao-ming

2018-03-01

Oil spill have the most common pollution to the marine ecological environment. In the late stage of physical method recovery, because of the thin oil and the strong sea breeze, the recovery vessels has low efficiency and high energy consumption. This paper develops a multi-stage oil-water-separating process carried by the sea oil spill recovery robot in severe conditions. This design consists of three separation process, among which both the first and third process adopt corrugated sheets horizontal oil-water separator, while the second is hydraulic rotary breaker. This design also equiptment with rectifier and cyclone separator and other important components. This process has high flexibility and high recovery efficiency. The implement effect is significant.
On use of the multistage dose-response model for assessing laboratory animal carcinogenicity

PubMed Central

Nitcheva, Daniella; Piegorsch, Walter W.; West, R. Webster

2007-01-01

We explore how well a statistical multistage model describes dose-response patterns in laboratory animal carcinogenicity experiments from a large database of quantal response data. The data are collected from the U.S. EPA’s publicly available IRIS data warehouse and examined statistically to determine how often higher-order values in the multistage predictor yield significant improvements in explanatory power over lower-order values. Our results suggest that the addition of a second-order parameter to the model only improves the fit about 20% of the time, while adding even higher-order terms apparently does not contribute to the fit at all, at least with the study designs we captured in the IRIS database. Also included is an examination of statistical tests for assessing significance of higher-order terms in a multistage dose-response model. It is noted that bootstrap testing methodology appears to offer greater stability for performing the hypothesis tests than a more-common, but possibly unstable, “Wald” test. PMID:17490794
Developing optimum sample size and multistage sampling plans for Lobesia botrana (Lepidoptera: Tortricidae) larval infestation and injury in northern Greece.

PubMed

Ifoulis, A A; Savopoulou-Soultani, M

2006-10-01

The purpose of this research was to quantify the spatial pattern and develop a sampling program for larvae of Lobesia botrana Denis and Schiffermüller (Lepidoptera: Tortricidae), an important vineyard pest in northern Greece. Taylor's power law and Iwao's patchiness regression were used to model the relationship between the mean and the variance of larval counts. Analysis of covariance was carried out, separately for infestation and injury, with combined second and third generation data, for vine and half-vine sample units. Common regression coefficients were estimated to permit use of the sampling plan over a wide range of conditions. Optimum sample sizes for infestation and injury, at three levels of precision, were developed. An investigation of a multistage sampling plan with a nested analysis of variance showed that if the goal of sampling is focusing on larval infestation, three grape clusters should be sampled in a half-vine; if the goal of sampling is focusing on injury, then two grape clusters per half-vine are recommended.
DNA pooling: a comprehensive, multi-stage association analysis of ACSL6 and SIRT5 polymorphisms in schizophrenia.

PubMed

Chowdari, K V; Northup, A; Pless, L; Wood, J; Joo, Y H; Mirnics, K; Lewis, D A; Levitt, P R; Bacanu, S-A; Nimgaonkar, V L

2007-04-01

Many candidate gene association studies have evaluated incomplete, unrepresentative sets of single nucleotide polymorphisms (SNPs), producing non-significant results that are difficult to interpret. Using a rapid, efficient strategy designed to investigate all common SNPs, we tested associations between schizophrenia and two positional candidate genes: ACSL6 (Acyl-Coenzyme A synthetase long-chain family member 6) and SIRT5 (silent mating type information regulation 2 homologue 5). We initially evaluated the utility of DNA sequencing traces to estimate SNP allele frequencies in pooled DNA samples. The mean variances for the DNA sequencing estimates were acceptable and were comparable to other published methods (mean variance: 0.0008, range 0-0.0119). Using pooled DNA samples from cases with schizophrenia/schizoaffective disorder (Diagnostic and Statistical Manual of Mental Disorders edition IV criteria) and controls (n=200, each group), we next sequenced all exons, introns and flanking upstream/downstream sequences for ACSL6 and SIRT5. Among 69 identified SNPs, case-control allele frequency comparisons revealed nine suggestive associations (P<0.2). Each of these SNPs was next genotyped in the individual samples composing the pools. A suggestive association with rs 11743803 at ACSL6 remained (allele-wise P=0.02), with diminished evidence in an extended sample (448 cases, 554 controls, P=0.062). In conclusion, we propose a multi-stage method for comprehensive, rapid, efficient and economical genetic association analysis that enables simultaneous SNP detection and allele frequency estimation in large samples. This strategy may be particularly useful for research groups lacking access to high throughput genotyping facilities. Our analyses did not yield convincing evidence for associations of schizophrenia with ACSL6 or SIRT5.
Evaluation of a multi-arm multi-stage Bayesian design for phase II drug selection trials - an example in hemato-oncology.

PubMed

Jacob, Louis; Uvarova, Maria; Boulet, Sandrine; Begaj, Inva; Chevret, Sylvie

2016-06-02

Multi-Arm Multi-Stage designs aim at comparing several new treatments to a common reference, in order to select or drop any treatment arm to move forward when such evidence already exists based on interim analyses. We redesigned a Bayesian adaptive design initially proposed for dose-finding, focusing our interest in the comparison of multiple experimental drugs to a control on a binary criterion measure. We redesigned a phase II clinical trial that randomly allocates patients across three (one control and two experimental) treatment arms to assess dropping decision rules. We were interested in dropping any arm due to futility, either based on historical control rate (first rule) or comparison across arms (second rule), and in stopping experimental arm due to its ability to reach a sufficient response rate (third rule), using the difference of response probabilities in Bayes binomial trials between the treated and control as a measure of treatment benefit. Simulations were then conducted to investigate the decision operating characteristics under a variety of plausible scenarios, as a function of the decision thresholds. Our findings suggest that one experimental treatment was less efficient than the control and could have been dropped from the trial based on a sample of approximately 20 instead of 40 patients. In the simulation study, stopping decisions were reached sooner for the first rule than for the second rule, with close mean estimates of response rates and small bias. According to the decision threshold, the mean sample size to detect the required 0.15 absolute benefit ranged from 63 to 70 (rule 3) with false negative rates of less than 2 % (rule 1) up to 6 % (rule 2). In contrast, detecting a 0.15 inferiority in response rates required a sample size ranging on average from 23 to 35 (rules 1 and 2, respectively) with a false positive rate ranging from 3.6 to 0.6 % (rule 3). Adaptive trial design is a good way to improve clinical trials. It allows removing ineffective drugs and reducing the trial sample size, while maintaining unbiased estimates. Decision thresholds can be set according to predefined fixed error decision rates. ClinicalTrials.gov Identifier: NCT01342692 .
Centrifugal and Axial Pump Design and Off-Design Performance Prediction

NASA Technical Reports Server (NTRS)

Veres, Joseph P.

1995-01-01

A meanline pump-flow modeling method has been developed to provide a fast capability for modeling pumps of cryogenic rocket engines. Based on this method, a meanline pump-flow code PUMPA was written that can predict the performance of pumps at off-design operating conditions, given the loss of the diffusion system at the design point. The design-point rotor efficiency and slip factors are obtained from empirical correlations to rotor-specific speed and geometry. The pump code can model axial, inducer, mixed-flow, and centrifugal pumps and can model multistage pumps in series. The rapid input setup and computer run time for this meanline pump flow code make it an effective analysis and conceptual design tool. The map-generation capabilities of the code provide the information needed for interfacing with a rocket engine system modeling code. The off-design and multistage modeling capabilities of PUMPA permit the user to do parametric design space exploration of candidate pump configurations and to provide head-flow maps for engine system evaluation.
MULTI-STAGE DELIVERY NANO-PARTICLE SYSTEMS FOR THERAPEUTIC APPLICATIONS

PubMed Central

Serda, Rita E.; Godin, Biana; Blanco, Elvin; Chiappini, Ciro; Ferrari, Mauro

2010-01-01

Background The daunting task for drug molecules to reach pathological lesions has fueled rapid advances in Nanomedicine. The progressive evolution of nanovectors has led to the development of multi-stage delivery systems aimed at overcoming the numerous obstacles encountered by nanovectors on their journey to the target site. Scope of Review This review summarizes major findings with respect to silicon-based drug delivery vectors for cancer therapeutics and imaging. Based on rational design, well established silicon technologies have been adapted for the fabrication of nanovectors with specific shapes, sizes, and porosities. These vectors are part of a multi-stage delivery system that contains multiple nano-components, each designed to achieve a specific task with the common goal of site-directed delivery of therapeutics. Major Conclusions Quasi-hemispherical and discoidal silicon microparticles are superior to spherical particles with respect to margination in the blood, with particles of different shapes and sizes having unique distributions in vivo. Cellular adhesion and internalization of silicon microparticles is influenced by microparticle shape and surface charge, with the latter dictating binding of serum opsonins. Based on in vitro cell studies, the internalization of porous silicon microparticles by endothelial cells and macrophages is compatible with cellular morphology, intracellular trafficking, mitosis, cell cycle progression, cytokine release, and cell viability. In vivo studies support superior therapeutic efficacy of liposomal encapsulated siRNA when delivered in multi-stage systems compared to free nanoparticles. PMID:20493927
DENA: A Configurable Microarchitecture and Design Flow for Biomedical DNA-Based Logic Design.

PubMed

Beiki, Zohre; Jahanian, Ali

2017-10-01

DNA is known as the building block for storing the life codes and transferring the genetic features through the generations. However, it is found that DNA strands can be used for a new type of computation that opens fascinating horizons in computational medicine. Significant contributions are addressed on design of DNA-based logic gates for medical and computational applications but there are serious challenges for designing the medium and large-scale DNA circuits. In this paper, a new microarchitecture and corresponding design flow is proposed to facilitate the design of multistage large-scale DNA logic systems. Feasibility and efficiency of the proposed microarchitecture are evaluated by implementing a full adder and, then, its cascadability is determined by implementing a multistage 8-bit adder. Simulation results show the highlight features of the proposed design style and microarchitecture in terms of the scalability, implementation cost, and signal integrity of the DNA-based logic system compared to the traditional approaches.
A timer inventory based upon manual and automated analysis of ERTS-1 and supporting aircraft data using multistage probability sampling. [Plumas National Forest, California

NASA Technical Reports Server (NTRS)

Nichols, J. D.; Gialdini, M.; Jaakkola, S.

1974-01-01

A quasi-operational study demonstrating that a timber inventory based on manual and automated analysis of ERTS-1, supporting aircraft data and ground data was made using multistage sampling techniques. The inventory proved to be a timely, cost effective alternative to conventional timber inventory techniques. The timber volume on the Quincy Ranger District of the Plumas National Forest was estimated to be 2.44 billion board feet with a sampling error of 8.2 percent. Costs per acre for the inventory procedure at 1.1 cent/acre compared favorably with the costs of a conventional inventory at 25 cents/acre. A point-by-point comparison of CALSCAN-classified ERTS data with human-interpreted low altitude photo plots indicated no significant differences in the overall classification accuracies.
Stator Indexing in Multistage Compressors

NASA Technical Reports Server (NTRS)

Barankiewicz, Wendy S.

1997-01-01

The relative circumferential location of stator rows (stator indexing) is an aspect of multistage compressor design that has not yet been explored for its potential impact on compressor aerodynamic performance. Although the inlet stages of multistage compressors usually have differing stator blade counts, the aft stages of core compressors can often have stage blocks with equal stator blade counts in successive stages. The potential impact of stator indexing is likely greatest in these stages. To assess the performance impact of stator indexing, researchers at the NASA Lewis Research Center used the 4 ft diameter, four-stage NASA Low Speed Axial Compressor for detailed experiments. This compressor has geometrically identical stages that can circumferentially index stator rows relative to each other in a controlled manner; thus it is an ideal test rig for such investigations.
Highly loaded multi-stage fan drive turbine: Plain blade configuration design

NASA Technical Reports Server (NTRS)

Evans, D. C.; Wolfmeyer, G. W.

1972-01-01

The constant-inside-diameter flowpath was scaled for testing in an existing turbine test facility. Blading detailed design is discussed, and design data are summarized. Predicted performance maps are presented. Steady-state stresses and vibratory behavior are discussed and the results of the mechanical design analysis are presented.
Investigating Robustness of Item Response Theory Proficiency Estimators to Atypical Response Behaviors under Two-Stage Multistage Testing. ETS GRE® Board Research Report. ETS GRE®-16-03. ETS Research Report No. RR-16-22

ERIC Educational Resources Information Center

Kim, Sooyeon; Moses, Tim

2016-01-01

The purpose of this study is to evaluate the extent to which item response theory (IRT) proficiency estimation methods are robust to the presence of aberrant responses under the "GRE"® General Test multistage adaptive testing (MST) design. To that end, a wide range of atypical response behaviors affecting as much as 10% of the test items…
Status of EPA's (Environmental Protection Agency's) LIMB (Limestone Injection Multistage Burner) demonstration program at Ohio Edison's Edgewater Unit 4. Report for September-December 1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hendriks, R.V.; Nolan, P.S.

1987-01-01

The paper describes and discusses the key design features of the retrofit of EPA's Limestone Injection Multistage Burner (LIMB) system to an operating, wall-fired utility boiler at Ohio Edison's Edgewater Station. It further describes results of the pertinent projects in EPA's LIMB program and shows how these results were used as the basis for the design of the system. The full-scale demonstration is expected to prove the effectiveness and cost of the LIMB concept for use on large-scale utility boilers. The equipment is now being installed at Edgewater, with system start-up scheduled for May 1987.
Performance assessment and microbial diversity of two pilot scale multi-stage sub-surface flow constructed wetland systems.

PubMed

Babatunde, A O; Miranda-CasoLuengo, Raul; Imtiaz, Mehreen; Zhao, Y Q; Meijer, Wim G

2016-08-01

This study assessed the performance and diversity of microbial communities in multi-stage sub-surface flow constructed wetland systems (CWs). Our aim was to assess the impact of configuration on treatment performance and microbial diversity in the systems. Results indicate that at loading rates up to 100gBOD5/(m(2)·day), similar treatment performances can be achieved using either a 3 or 4 stage configuration. In the case of phosphorus (P), the impact of configuration was less obvious and a minimum of 80% P removal can be expected for loadings up to 10gP/(m(2)·day) based on the performance results obtained within the first 16months of operation. Microbial analysis showed an increased bacterial diversity in stage four compared to the first stage. These results indicate that the design and configuration of multi-stage constructed wetland systems may have an impact on the treatment performance and the composition of the microbial community in the systems, and such knowledge can be used to improve their design and performance. Copyright © 2016. Published by Elsevier B.V.
Computer programs for axial flow compressor design

NASA Technical Reports Server (NTRS)

Carmody, R. H.; Creveling, H. F.

1969-01-01

Four computer programs examine effects of design parameters and indicate areas for research of multistage axial flow compressors. The programs provide information on velocity diagrams and stage-by-stage performance calculation, radial equilibrium of flow, radial distribution of total pressure, and off-design performance calculation.

Development of JSTAMP-Works/NV and HYSTAMP for Multipurpose Multistage Sheet Metal Forming Simulation

NASA Astrophysics Data System (ADS)

Umezu, Yasuyoshi; Watanabe, Yuko; Ma, Ninshu

2005-08-01

Since 1996, Japan Research Institute Limited (JRI) has been providing a sheet metal forming simulation system called JSTAMP-Works packaged the FEM solvers of LS-DYNA and JOH/NIKE, which might be the first multistage system at that time and has been enjoying good reputation among users in Japan. To match the recent needs, "faster, more accurate and easier", of process designers and CAE engineers, a new metal forming simulation system JSTAMP-Works/NV is developed. The JSTAMP-Works/NV packaged the automatic healing function of CAD and had much more new capabilities such as prediction of 3D trimming lines for flanging or hemming, remote control of solver execution for multi-stage forming processes and shape evaluation between FEM and CAD. On the other way, a multi-stage multi-purpose inverse FEM solver HYSTAMP is developed and will be soon put into market, which is approved to be very fast, quite accurate and robust. Lastly, authors will give some application examples of user defined ductile damage subroutine in LS-DYNA for the estimation of material failure and springback in metal forming simulation.
The China Mental Health Survey: II. Design and field procedures.

PubMed

Liu, Zhaorui; Huang, Yueqin; Lv, Ping; Zhang, Tingting; Wang, Hong; Li, Qiang; Yan, Jie; Yu, Yaqin; Kou, Changgui; Xu, Xiufeng; Lu, Jin; Wang, Zhizhong; Qiu, Hongyan; Xu, Yifeng; He, Yanling; Li, Tao; Guo, Wanjun; Tian, Hongjun; Xu, Guangming; Xu, Xiangdong; Ma, Yanjuan; Wang, Linhong; Wang, Limin; Yan, Yongping; Wang, Bo; Xiao, Shuiyuan; Zhou, Liang; Li, Lingjiang; Tan, Liwen; Chen, Hongguang; Ma, Chao

2016-11-01

China Mental Health Survey (CMHS), which was carried out from July 2013 to March 2015, was the first national representative community survey of mental disorders and mental health services in China using computer-assisted personal interview (CAPI). Face-to-face interviews were finished in the homes of respondents who were selected from a nationally representative multi-stage disproportionate stratified sampling procedure. Sample selection was integrated with the National Chronic Disease and Risk Factor Surveillance Survey administered by the National Centre for Chronic and Non-communicable Disease Control and Prevention in 2013, which made it possible to obtain both physical and mental health information of Chinese community population. One-stage design of data collection was used in the CMHS to obtain the information of mental disorders, including mood disorders, anxiety disorders, and substance use disorders, while two-stage design was applied for schizophrenia and other psychotic disorders, and dementia. A total of 28,140 respondents finished the survey with 72.9% of the overall response rate. This paper describes the survey mode, fieldwork organization, procedures, and the sample design and weighting of the CMHS. Detailed information is presented on the establishment of a new payment scheme for interviewers, results of the quality control in both stages, and evaluations to the weighting.
Multistage classification of multispectral Earth observational data: The design approach

NASA Technical Reports Server (NTRS)

Bauer, M. E. (Principal Investigator); Muasher, M. J.; Landgrebe, D. A.

1981-01-01

An algorithm is proposed which predicts the optimal features at every node in a binary tree procedure. The algorithm estimates the probability of error by approximating the area under the likelihood ratio function for two classes and taking into account the number of training samples used in estimating each of these two classes. Some results on feature selection techniques, particularly in the presence of a very limited set of training samples, are presented. Results comparing probabilities of error predicted by the proposed algorithm as a function of dimensionality as compared to experimental observations are shown for aircraft and LANDSAT data. Results are obtained for both real and simulated data. Finally, two binary tree examples which use the algorithm are presented to illustrate the usefulness of the procedure.
Latin American Study of Nutrition and Health (ELANS): rationale and study design.

PubMed

Fisberg, M; Kovalskys, I; Gómez, G; Rigotti, A; Cortés, L Y; Herrera-Cuenca, M; Yépez, M C; Pareja, R G; Guajardo, V; Zimberg, I Z; Chiavegatto Filho, A D P; Pratt, M; Koletzko, B; Tucker, K L

2016-01-30

Obesity is growing at an alarming rate in Latin America. Lifestyle behaviours such as physical activity and dietary intake have been largely associated with obesity in many countries; however studies that combine nutrition and physical activity assessment in representative samples of Latin American countries are lacking. The aim of this study is to present the design rationale of the Latin American Study of Nutrition and Health/Estudio Latinoamericano de Nutrición y Salud (ELANS) with a particular focus on its quality control procedures and recruitment processes. The ELANS is a multicenter cross-sectional nutrition and health surveillance study of a nationally representative sample of urban populations from eight Latin American countries (Argentina, Brazil, Chile, Colombia, Costa Rica, Ecuador, Perú and Venezuela). A standard study protocol was designed to evaluate the nutritional intakes, physical activity levels, and anthropometric measurements of 9000 enrolled participants. The study was based on a complex, multistage sample design and the sample was stratified by gender, age (15 to 65 years old) and socioeconomic level. A small-scale pilot study was performed in each country to test the procedures and tools. This study will provide valuable information and a unique dataset regarding Latin America that will enable cross-country comparisons of nutritional statuses that focus on energy and macro- and micronutrient intakes, food patterns, and energy expenditure. Clinical Trials NCT02226627.
Rural Residents Who Are Hospitalized in Rural and Urban Hospitals: United States, 2010

MedlinePlus

... once in NHDS. Because of the complex multistage design of NHDS, the survey data must be inflated ... this report exclude newborns. More details about the design of NHDS have been published elsewhere ( 14 ). Differences ...
Methodology of a nationwide cross-sectional survey of prevalence and epidemiological patterns of hepatitis A, B and C infection in Brazil.

PubMed

Ximenes, Ricardo Arraes de Alencar; Pereira, Leila Maria Beltrão; Martelli, Celina Maria Turchi; Merchán-Hamann, Edgar; Stein, Airton Tetelbom; Figueiredo, Gerusa Maria; Braga, Maria Cynthia; Montarroyos, Ulisses Ramos; Brasil, Leila Melo; Turchi, Marília Dalva; Fonseca, José Carlos Ferraz da; Lima, Maria Luiza Carvalho de; Alencar, Luis Cláudio Arraes de; Costa, Marcelo; Coral, Gabriela; Moreira, Regina Celia; Cardoso, Maria Regina Alves

2010-09-01

A population-based survey to provide information on the prevalence of hepatitis viral infection and the pattern of risk factors was carried out in the urban population of all Brazilian state capitals and the Federal District, between 2005 and 2009. This paper describes the design and methodology of the study which involved a population aged 5 to 19 for hepatitis A and 10 to 69 for hepatitis B and C. Interviews and blood samples were obtained through household visits. The sample was selected using stratified multi-stage cluster sampling and was drawn with equal probability from each domain of study (region and age-group). Nationwide, 19,280 households and ~31,000 residents were selected. The study is large enough to detect prevalence of viral infection around 0.1% and risk factor assessments within each region. The methodology seems to be a viable way of differentiating between distinct epidemiological patterns of hepatitis A, B and C. These data will be of value for the evaluation of vaccination policies and for the design of control program strategies.
Sampling Methods in Cardiovascular Nursing Research: An Overview.

PubMed

Kandola, Damanpreet; Banner, Davina; O'Keefe-McCarthy, Sheila; Jassal, Debbie

2014-01-01

Cardiovascular nursing research covers a wide array of topics from health services to psychosocial patient experiences. The selection of specific participant samples is an important part of the research design and process. The sampling strategy employed is of utmost importance to ensure that a representative sample of participants is chosen. There are two main categories of sampling methods: probability and non-probability. Probability sampling is the random selection of elements from the population, where each element of the population has an equal and independent chance of being included in the sample. There are five main types of probability sampling including simple random sampling, systematic sampling, stratified sampling, cluster sampling, and multi-stage sampling. Non-probability sampling methods are those in which elements are chosen through non-random methods for inclusion into the research study and include convenience sampling, purposive sampling, and snowball sampling. Each approach offers distinct advantages and disadvantages and must be considered critically. In this research column, we provide an introduction to these key sampling techniques and draw on examples from the cardiovascular research. Understanding the differences in sampling techniques may aid nurses in effective appraisal of research literature and provide a reference pointfor nurses who engage in cardiovascular research.
Optimized FPGA Implementation of Multi-Rate FIR Filters Through Thread Decomposition

NASA Technical Reports Server (NTRS)

Zheng, Jason Xin; Nguyen, Kayla; He, Yutao

2010-01-01

Multirate (decimation/interpolation) filters are among the essential signal processing components in spaceborne instruments where Finite Impulse Response (FIR) filters are often used to minimize nonlinear group delay and finite-precision effects. Cascaded (multi-stage) designs of Multi-Rate FIR (MRFIR) filters are further used for large rate change ratio, in order to lower the required throughput while simultaneously achieving comparable or better performance than single-stage designs. Traditional representation and implementation of MRFIR employ polyphase decomposition of the original filter structure, whose main purpose is to compute only the needed output at the lowest possible sampling rate. In this paper, an alternative representation and implementation technique, called TD-MRFIR (Thread Decomposition MRFIR), is presented. The basic idea is to decompose MRFIR into output computational threads, in contrast to a structural decomposition of the original filter as done in the polyphase decomposition. Each thread represents an instance of the finite convolution required to produce a single output of the MRFIR. The filter is thus viewed as a finite collection of concurrent threads. The technical details of TD-MRFIR will be explained, first showing its applicability to the implementation of downsampling, upsampling, and resampling FIR filters, and then describing a general strategy to optimally allocate the number of filter taps. A particular FPGA design of multi-stage TD-MRFIR for the L-band radar of NASA's SMAP (Soil Moisture Active Passive) instrument is demonstrated; and its implementation results in several targeted FPGA devices are summarized in terms of the functional (bit width, fixed-point error) and performance (time closure, resource usage, and power estimation) parameters.
The decision tree classifier - Design and potential. [for Landsat-1 data

NASA Technical Reports Server (NTRS)

Hauska, H.; Swain, P. H.

1975-01-01

A new classifier has been developed for the computerized analysis of remote sensor data. The decision tree classifier is essentially a maximum likelihood classifier using multistage decision logic. It is characterized by the fact that an unknown sample can be classified into a class using one or several decision functions in a successive manner. The classifier is applied to the analysis of data sensed by Landsat-1 over Kenosha Pass, Colorado. The classifier is illustrated by a tree diagram which for processing purposes is encoded as a string of symbols such that there is a unique one-to-one relationship between string and decision tree.
General theory of the multistage geminate reactions of the isolated pairs of reactants. II. Detailed balance and universal asymptotes of kinetics.

PubMed

Kipriyanov, Alexey A; Doktorov, Alexander B

2014-10-14

The analysis of general (matrix) kinetic equations for the mean survival probabilities of any of the species in a sample (or mean concentrations) has been made for a wide class of the multistage geminate reactions of the isolated pairs. These kinetic equations (obtained in the frame of the kinetic approach based on the concept of "effective" particles in Paper I) take into account various possible elementary reactions (stages of a multistage reaction) excluding monomolecular, but including physical and chemical processes of the change in internal quantum states carried out with the isolated pairs of reactants (or isolated reactants). The general basic principles of total and detailed balance have been established. The behavior of the reacting system has been considered on macroscopic time scales, and the universal long-term kinetics has been determined.
General theory of multistage geminate reactions of isolated pairs of reactants. I. Kinetic equations.

PubMed

Doktorov, Alexander B; Kipriyanov, Alexey A

2014-05-14

General matrix approach to the consideration of multistage geminate reactions of isolated pairs of reactants depending on reactant mobility is formulated on the basis of the concept of "effective" particles. Various elementary reactions (stages of multistage reaction including physicochemical processes of internal quantum state changes) proceeding with the participation of isolated pairs of reactants (or isolated reactants) are taken into account. Investigation has been made in terms of kinetic approach implying the derivation of general (matrix) kinetic equations for local and mean probabilities of finding any of the reaction species in the sample under study (or for local and mean concentrations). The recipes for the calculation of kinetic coefficients of the equations for mean quantities in terms of relative coordinates of reactants have been formulated in the general case of inhomogeneous reacting systems. Important specific case of homogeneous reacting systems is considered.
Prevalence of hepatitis B and C virus infections and their related risk factors in Libya: a national seroepidemiological survey.

PubMed

Elzouki, A-N; Smeo, M-N; Sammud, M; Elahmer, O; Daw, M; Furarah, A; Abudher, A; Mohamed, M K

2013-07-01

A high prevalence of hepatitis B (HBV) and C virus (HCV) infections has been reported among specific patient groups in Libya; a survey was thus designed to determine the extent of the problem at the national level. A multi-stage sampling design covering all administrative areas of Libya was applied, covering > 65,000 individuals of all age groups. All subjects gave a blood sample and completed a questionnaire on demographic and risk behaviour data. The prevalence of HBV surface antigen (HBsAg) and anti-HCV were 2.2% and 1.3% respectively. The prevalence of anti-HCV increased with age, rising gradually after age 30 years, in contrast to a stable prevalence of HBsAg in all age groups 10+ years. Age-adjusted risk factors for HCV infection were previous hospitalization, surgical operations, previous blood transfusions and intravenous drug use; for HBV infection only family exposure or contact with HBV case were identified.
Architecture of the parallel hierarchical network for fast image recognition

NASA Astrophysics Data System (ADS)

Timchenko, Leonid; Wójcik, Waldemar; Kokriatskaia, Natalia; Kutaev, Yuriy; Ivasyuk, Igor; Kotyra, Andrzej; Smailova, Saule

2016-09-01

Multistage integration of visual information in the brain allows humans to respond quickly to most significant stimuli while maintaining their ability to recognize small details in the image. Implementation of this principle in technical systems can lead to more efficient processing procedures. The multistage approach to image processing includes main types of cortical multistage convergence. The input images are mapped into a flexible hierarchy that reflects complexity of image data. Procedures of the temporal image decomposition and hierarchy formation are described in mathematical expressions. The multistage system highlights spatial regularities, which are passed through a number of transformational levels to generate a coded representation of the image that encapsulates a structure on different hierarchical levels in the image. At each processing stage a single output result is computed to allow a quick response of the system. The result is presented as an activity pattern, which can be compared with previously computed patterns on the basis of the closest match. With regard to the forecasting method, its idea lies in the following. In the results synchronization block, network-processed data arrive to the database where a sample of most correlated data is drawn using service parameters of the parallel-hierarchical network.
Core compressor exit stage study. Volume 2: Data and performance report for the baseline configuration

NASA Technical Reports Server (NTRS)

Wisler, D. C.

1980-01-01

The objective of the program is to develop rear stage blading designs that have lower losses in their endwall boundary layer regions. The overall technical approach in this efficiency improvement program utilized General Electric's Low Speed Research Compressor as the principal investigative tool. Tests were conducted in two ways: using four identical stages of blading so that test data would be obtained in a true multistage environment and using a single stage of blading so that comparison with the multistage test results could be made.
Managing Clustered Data Using Hierarchical Linear Modeling

ERIC Educational Resources Information Center

Warne, Russell T.; Li, Yan; McKyer, E. Lisako J.; Condie, Rachel; Diep, Cassandra S.; Murano, Peter S.

2012-01-01

Researchers in nutrition research often use cluster or multistage sampling to gather participants for their studies. These sampling methods often produce violations of the assumption of data independence that most traditional statistics share. Hierarchical linear modeling is a statistical method that can overcome violations of the independence…
Hybrid Computerized Adaptive Testing: From Group Sequential Design to Fully Sequential Design

ERIC Educational Resources Information Center

Wang, Shiyu; Lin, Haiyan; Chang, Hua-Hua; Douglas, Jeff

2016-01-01

Computerized adaptive testing (CAT) and multistage testing (MST) have become two of the most popular modes in large-scale computer-based sequential testing. Though most designs of CAT and MST exhibit strength and weakness in recent large-scale implementations, there is no simple answer to the question of which design is better because different…
Aerodynamic Design Study of Advanced Multistage Axial Compressor

NASA Technical Reports Server (NTRS)

Larosiliere, Louis M.; Wood, Jerry R.; Hathaway, Michael D.; Medd, Adam J.; Dang, Thong Q.

2002-01-01

As a direct response to the need for further performance gains from current multistage axial compressors, an investigation of advanced aerodynamic design concepts that will lead to compact, high-efficiency, and wide-operability configurations is being pursued. Part I of this report describes the projected level of technical advancement relative to the state of the art and quantifies it in terms of basic aerodynamic technology elements of current design systems. A rational enhancement of these elements is shown to lead to a substantial expansion of the design and operability space. Aerodynamic design considerations for a four-stage core compressor intended to serve as a vehicle to develop, integrate, and demonstrate aerotechnology advancements are discussed. This design is biased toward high efficiency at high loading. Three-dimensional blading and spanwise tailoring of vector diagrams guided by computational fluid dynamics (CFD) are used to manage the aerodynamics of the high-loaded endwall regions. Certain deleterious flow features, such as leakage-vortex-dominated endwall flow and strong shock-boundary-layer interactions, were identified and targeted for improvement. However, the preliminary results were encouraging and the front two stages were extracted for further aerodynamic trimming using a three-dimensional inverse design method described in part II of this report. The benefits of the inverse design method are illustrated by developing an appropriate pressure-loading strategy for transonic blading and applying it to reblade the rotors in the front two stages of the four-stage configuration. Multistage CFD simulations based on the average passage formulation indicated an overall efficiency potential far exceeding current practice for the front two stages. Results of the CFD simulation at the aerodynamic design point are interrogated to identify areas requiring additional development. In spite of the significantly higher aerodynamic loadings, advanced CFD-based tools were able to effectively guide the design of a very efficient axial compressor under state-of-the-art aeromechanical constraints.
High-efficiency helical traveling-wave tube with dynamic velocity taper and advanced multistage depressed collector

NASA Technical Reports Server (NTRS)

Curren, Arthur N.; Palmer, Raymond W.; Force, Dale A.; Dombro, Louis; Long, James A.

1987-01-01

A NASA-sponsored research and development contract has been established with the Watkins-Johnson Company to fabricate high-efficiency 20-watt helical traveling wave tubes (TWTs) operating at 8.4 to 8.43 GHz. The TWTs employ dynamic velocity tapers (DVTs) and advanced multistage depressed collectors (MDCs) having electrodes with low secondary electron emission characteristics. The TWT designs include two different DVTs; one for maximum efficiency and the other for minimum distortion and phase shift. The MDC designs include electrodes of untreated and ion-textured graphite as well as copper which has been treated for secondary electron emission suppression. Objectives of the program include achieving at least 55 percent overall efficiency. Tests with the first TWTs (with undepressed collectors) indicate good agreement between predicted and measured RF efficiencies with as high as 30 percent improvement in RF efficiency over conventional helix designs.
Multistage variable probability forest volume inventory. [the Defiance Unit of the Navajo Nation

NASA Technical Reports Server (NTRS)

Anderson, J. E. (Principal Investigator)

1979-01-01

An inventory scheme based on the use of computer processed LANDSAT MSS data was developed. Output from the inventory scheme provides an estimate of the standing net saw timber volume of a major timber species on a selected forested area of the Navajo Nation. Such estimates are based on the values of parameters currently used for scaled sawlog conversion to mill output. The multistage variable probability sampling appears capable of producing estimates which compare favorably with those produced using conventional techniques. In addition, the reduction in time, manpower, and overall costs lend it to numerous applications.
Associations among Adolescent Risk Behaviours and Self-Esteem in Six Domains

ERIC Educational Resources Information Center

Wild, Lauren G.; Flisher, Alan J.; Bhana, Arvin; Lombard, Carl

2004-01-01

Background: This study investigated associations among adolescents' self-esteem in 6 domains (peers, school, family, sports/athletics, body image and global self-worth) and risk behaviours related to substance use, bullying, suicidality and sexuality. Method: A multistage stratified sampling strategy was used to select a representative sample of…

Stall/surge dynamics of a multi-stage air compressor in response to a load transient of a hybrid solid oxide fuel cell-gas turbine system

NASA Astrophysics Data System (ADS)

Azizi, Mohammad Ali; Brouwer, Jacob

2017-10-01

A better understanding of turbulent unsteady flows in gas turbine systems is necessary to design and control compressors for hybrid fuel cell-gas turbine systems. Compressor stall/surge analysis for a 4 MW hybrid solid oxide fuel cell-gas turbine system for locomotive applications is performed based upon a 1.7 MW multi-stage air compressor. Control strategies are applied to prevent operation of the hybrid SOFC-GT beyond the stall/surge lines of the compressor. Computational fluid dynamics tools are used to simulate the flow distribution and instabilities near the stall/surge line. The results show that a 1.7 MW system compressor like that of a Kawasaki gas turbine is an appropriate choice among the industrial compressors to be used in a 4 MW locomotive SOFC-GT with topping cycle design. The multi-stage radial design of the compressor enhances the ability of the compressor to maintain air flow rate during transient step-load changes. These transient step-load changes are exhibited in many potential applications for SOFC/GT systems. The compressor provides sustained air flow rate during the mild stall/surge event that occurs due to the transient step-load change that is applied, indicating that this type of compressor is well-suited for this hybrid application.
Multistage switching hardware and software implementations for student experiment purpose

NASA Astrophysics Data System (ADS)

Sani, A.; Suherman

2018-02-01

Current communication and internet networks are underpinned by the switching technologies that interconnect one network to the others. Students’ understanding on networks rely on how they conver the theories. However, understanding theories without touching the reality may exert spots in the overall knowledge. This paper reports the progress of the multistage switching design and implementation for student laboratory activities. The hardware and software designs are based on three stages clos switching architecture with modular 2x2 switches, controlled by an arduino microcontroller. The designed modules can also be extended for batcher and bayan switch, and working on circuit and packet switching systems. The circuit analysis and simulation show that the blocking probability for each switch combinations can be obtained by generating random or patterned traffics. The mathematic model and simulation analysis shows 16.4% blocking probability differences as the traffic generation is uniform. The circuits design components and interfacing solution have been identified to allow next step implementation.
Flexible sequential designs for multi-arm clinical trials.

PubMed

Magirr, D; Stallard, N; Jaki, T

2014-08-30

Adaptive designs that are based on group-sequential approaches have the benefit of being efficient as stopping boundaries can be found that lead to good operating characteristics with test decisions based solely on sufficient statistics. The drawback of these so called 'pre-planned adaptive' designs is that unexpected design changes are not possible without impacting the error rates. 'Flexible adaptive designs' on the other hand can cope with a large number of contingencies at the cost of reduced efficiency. In this work, we focus on two different approaches for multi-arm multi-stage trials, which are based on group-sequential ideas, and discuss how these 'pre-planned adaptive designs' can be modified to allow for flexibility. We then show how the added flexibility can be used for treatment selection and sample size reassessment and evaluate the impact on the error rates in a simulation study. The results show that an impressive overall procedure can be found by combining a well chosen pre-planned design with an application of the conditional error principle to allow flexible treatment selection. Copyright © 2014 John Wiley & Sons, Ltd.
Types of Bullying in the Senior High Schools in Ghana

ERIC Educational Resources Information Center

Antiri, Kwasi Otopa

2016-01-01

The main objective of the study was to examine the types of bullying that were taking place in the senior high schools in Ghana. A multi-stage sampling procedure, comprising purposive, simple random and snowball sampling technique, was used in the selection of the sample. A total of 354 respondents were drawn six schools in Ashanti, Central and…
Multistage point relascope and randomized branch sampling for downed coarse woody debris estimation

Treesearch

Jeffrey H. Gove; Mark J. Ducey; Harry T. Valentine

2002-01-01

New sampling methods have recently been introduced that allow estimation of downed coarse woody debris using an angle gauge, or relascope. The theory behind these methods is based on sampling straight pieces of downed coarse woody debris. When pieces deviate from this ideal situation, auxillary methods must be employed. We describe a two-stage procedure where the...
Alternatives to Three-Mode Factor Analysis: A Case Study with Data Evaluating Perceived Barriers to Medical School Training.

ERIC Educational Resources Information Center

Thomson, William A.; And Others

While educational researchers frequently collect data from a sample of individuals on a sample of variables, they sometimes collect data involving samples of: (1) subjects; (2) variables; and (3) occasions of measurement. A multistage procedure for analyzing such three-mode data is presented, focusing on effect sizes and graphic confidence…
Midwives Performance in Early Detection of Growth and Development Irregularities of Children Based on Task Commitment

ERIC Educational Resources Information Center

Utami, Sri; Nursalam; Hargono, Rachmat; Susilaningrum, Rekawati

2016-01-01

The purpose of this study was to analyze the performance of midwives based on the task commitment. This was an observational analytic with cross sectional approach. Multistage random sampling was used to determine the public health center, proportional random sampling to selected participants. The samples were 222 midwives in the public health…
Navigating complex sample analysis using national survey data.

PubMed

Saylor, Jennifer; Friedmann, Erika; Lee, Hyeon Joo

2012-01-01

The National Center for Health Statistics conducts the National Health and Nutrition Examination Survey and other national surveys with probability-based complex sample designs. Goals of national surveys are to provide valid data for the population of the United States. Analyses of data from population surveys present unique challenges in the research process but are valuable avenues to study the health of the United States population. The aim of this study was to demonstrate the importance of using complex data analysis techniques for data obtained with complex multistage sampling design and provide an example of analysis using the SPSS Complex Samples procedure. Illustration of challenges and solutions specific to secondary data analysis of national databases are described using the National Health and Nutrition Examination Survey as the exemplar. Oversampling of small or sensitive groups provides necessary estimates of variability within small groups. Use of weights without complex samples accurately estimates population means and frequency from the sample after accounting for over- or undersampling of specific groups. Weighting alone leads to inappropriate population estimates of variability, because they are computed as if the measures were from the entire population rather than a sample in the data set. The SPSS Complex Samples procedure allows inclusion of all sampling design elements, stratification, clusters, and weights. Use of national data sets allows use of extensive, expensive, and well-documented survey data for exploratory questions but limits analysis to those variables included in the data set. The large sample permits examination of multiple predictors and interactive relationships. Merging data files, availability of data in several waves of surveys, and complex sampling are techniques used to provide a representative sample but present unique challenges. In sophisticated data analysis techniques, use of these data is optimized.
HIRIS (High-Resolution Imaging Spectrometer: Science opportunities for the 1990s. Earth observing system. Volume 2C: Instrument panel report

NASA Technical Reports Server (NTRS)

1987-01-01

The high-resolution imaging spectrometer (HIRIS) is an Earth Observing System (EOS) sensor developed for high spatial and spectral resolution. It can acquire more information in the 0.4 to 2.5 micrometer spectral region than any other sensor yet envisioned. Its capability for critical sampling at high spatial resolution makes it an ideal complement to the MODIS (moderate-resolution imaging spectrometer) and HMMR (high-resolution multifrequency microwave radiometer), lower resolution sensors designed for repetitive coverage. With HIRIS it is possible to observe transient processes in a multistage remote sensing strategy for Earth observations on a global scale. The objectives, science requirements, and current sensor design of the HIRIS are discussed along with the synergism of the sensor with other EOS instruments and data handling and processing requirements.
Design and performance verification of advanced multistage depressed collectors. [traveling wave tubes for ECM

NASA Technical Reports Server (NTRS)

Kosmahl, H.; Ramins, P.

1975-01-01

Design and performance of a small size, 4-stage depressed collector are discussed. The collector and a spent beam refocusing section preceding it are intended for efficiency enhancement of octave bandwidth, high CW power traveling wave tubes for use in ECM.
Design and Weighting Methods for a Nationally Representative Sample of HIV-infected Adults Receiving Medical Care in the United States-Medical Monitoring Project

PubMed Central

Iachan, Ronaldo; H. Johnson, Christopher; L. Harding, Richard; Kyle, Tonja; Saavedra, Pedro; L. Frazier, Emma; Beer, Linda; L. Mattson, Christine; Skarbinski, Jacek

2016-01-01

Background: Health surveys of the general US population are inadequate for monitoring human immunodeficiency virus (HIV) infection because the relatively low prevalence of the disease (<0.5%) leads to small subpopulation sample sizes. Objective: To collect a nationally and locally representative probability sample of HIV-infected adults receiving medical care to monitor clinical and behavioral outcomes, supplementing the data in the National HIV Surveillance System. This paper describes the sample design and weighting methods for the Medical Monitoring Project (MMP) and provides estimates of the size and characteristics of this population. Methods: To develop a method for obtaining valid, representative estimates of the in-care population, we implemented a cross-sectional, three-stage design that sampled 23 jurisdictions, then 691 facilities, then 9,344 HIV patients receiving medical care, using probability-proportional-to-size methods. The data weighting process followed standard methods, accounting for the probabilities of selection at each stage and adjusting for nonresponse and multiplicity. Nonresponse adjustments accounted for differing response at both facility and patient levels. Multiplicity adjustments accounted for visits to more than one HIV care facility. Results: MMP used a multistage stratified probability sampling design that was approximately self-weighting in each of the 23 project areas and nationally. The probability sample represents the estimated 421,186 HIV-infected adults receiving medical care during January through April 2009. Methods were efficient (i.e., induced small, unequal weighting effects and small standard errors for a range of weighted estimates). Conclusion: The information collected through MMP allows monitoring trends in clinical and behavioral outcomes and informs resource allocation for treatment and prevention activities. PMID:27651851
Women's preference for traditional birth attendants and modern health care practitioners in Akpabuyo community of Cross River State, Nigeria.

PubMed

Akpabio, Idongesit I; Edet, Olaide B; Etifit, Rita E; Robinson-Bassey, Grace C

2014-01-01

The proportion of women who patronized traditional birth attendants (TBAs) or modern health care practitioners (MHCPs) was compared, including reasons for their choices. A comparative design was adopted to study 300 respondents selected through a multistage systematic random sampling technique. The instrument for data collection was a validated 21-item structured questionnaire. We observed that 75 (25%) patronized and 80 (27%) preferred TBAs, and 206 (69%) patronized and 220 (75%) preferred MHCPs, while 19 (6%) patronized both. The view that TBAs prayed before conducting deliveries was supported by a majority 75 (94%) of the respondents who preferred them. Factors associated with preference for TBAs should be addressed.
Proportion of elementary school pupils’ anthropometric characteristics with dimensions of classroom furniture in Isfahan, Iran

PubMed Central

Habibi, Ehsanollah; Asaadi, Zahra; Hosseini, Seyed Mohsen

2011-01-01

BACKGROUND: This study is aimed to examine the appropriacy of school furniture to Iranian pupils′ anthropometric features. METHODS: The participants in this cross-sectional study were 493 boys and 489 girls with the age-range of 7 to 12 years who were selected through a multistage random cluster sampling procedure. Age, weight, height, and anthropometric dimensions were determined. RESULTS: This study indicates that there is a significant difference between the minimum and maximum acceptable dimensions and those of the available furniture (p < 0.001). CONCLUSIONS: In designing suitable furniture for pupils the anthropometric differences of age and gender must be taken into account. PMID:21448391
Development of Effective Teacher Program: Teamwork Building Program for Thailand's Municipal Schools

ERIC Educational Resources Information Center

Chantathai, Pimpka; Tesaputa, Kowat; Somprach, Kanokorn

2015-01-01

This research is aimed to formulate the effective teacher teamwork program in municipal schools in Thailand. Primary survey on current situation and problem was conducted to develop the plan to suggest potential programs. Samples were randomly selected from municipal schools by using multi-stage sampling method in order to investigate their…
The Impact of Education on Rural Women's Participation in Political and Economic Activities

ERIC Educational Resources Information Center

Bishaw, Alemayehu

2014-01-01

This study endeavored to investigate the impact of education on rural women's participation in political and economic activities. Six hundred rural women and 12 gender Activists were selected for this study from three Zones of Amhara Region, Ethiopia using multi-stage random sampling technique and purposeful sampling techniques respectively.…
Design of a 4 1/2 stage turbine with a stage loading factor of 4.66 and high specific work output

NASA Technical Reports Server (NTRS)

Webster, P. F.

1976-01-01

The aerodynamic design of a highly loaded multistage fan drive turbine is discussed. Turbine flowpath and airfoil sections are presented along with respective pressure and velocity distributions. Vibrational modes are identified in the expected turbine operating range.
Laboratory research of fracture geometry in multistage HFF in triaxial state

NASA Astrophysics Data System (ADS)

Bondarenko, T. M.; Hou, B.; Chen, M.; Yan, L.

2017-05-01

Multistage hydraulic fracturing of formation (HFF) in wells with horizontal completion is an efficientmethod for intensifying oil extraction which, as a rule, is used to develop nontraditional collectors. It is assumed that the complicated character of HFF fractures significantly influences the fracture geometry in the rock matrix. Numerous theoretical models proposed to predict the fracture geometry and the character of interaction of mechanical stresses in the multistage HFF have not been proved experimentally. In this paper, we present the results of laboratory modeling of the multistage HFF performed on a contemporary laboratory-scale plant in the triaxial stress state by using a gel-solution as the HFF agent. As a result of the experiment, a fracturing pattern was formed in the cubic specimen of the model material. The laboratory results showed that a nearly plane fracture is formed at the firstHFF stage, while a concave fracture is formed at the second HFF stage. The interaction of the stress fields created by the two principal HFF fractures results in the growth of secondary fractures whose directions turned out to be parallel to the modeled well bore. But this stress interference leads to a decrease in the width of the second principal fracture. It is was discovered that the penny-shaped fracture model is more appropriate for predicting the geometry of HFF fractures in horizontal wells than the two-dimensional models of fracture propagation (PKN model, KGD model). A computational experiment based on the boundary element method was carried out to obtain the qualitative description of the multistage HFF processes. As a result, a mechanical model of fracture propagation was constructed,which was used to obtain the mechanical stress field (the stress contrast) and the fracture opening angle distribution over fracture length and fracture orientation direction. The conclusions made in the laboratory modeling of the multistage HFF technology agree well with the conclusions made in the computational experiment. Special attention must be paid to the design of the HFF stage spacing density in the implementation of the multistage HFF in wells with horizontal completion.
Enzyme-regulated the changes of pH values for assembling a colorimetric and multistage interconnection logic network with multiple readouts.

PubMed

Huang, Yanyan; Ran, Xiang; Lin, Youhui; Ren, Jinsong; Qu, Xiaogang

2015-04-22

Based on enzymatic reactions-triggered changes of pH values and biocomputing, a novel and multistage interconnection biological network with multiple easy-detectable signal outputs has been developed. Compared with traditional chemical computing, the enzyme-based biological system could overcome the interference between reactions or the incompatibility of individual computing gates and offer a unique opportunity to assemble multicomponent/multifunctional logic circuitries. Our system included four enzyme inputs: β-galactosidase (β-gal), glucose oxidase (GOx), esterase (Est) and urease (Ur). With the assistance of two signal transducers (gold nanoparticles and acid-base indicators) or pH meter, the outputs of the biological network could be conveniently read by the naked eyes. In contrast to current methods, the approach present here could realize cost-effective, label-free and colorimetric logic operations without complicated instrument. By designing a series of Boolean logic operations, we could logically make judgment of the compositions of the samples on the basis of visual output signals. Our work offered a promising paradigm for future biological computing technology and might be highly useful in future intelligent diagnostics, prodrug activation, smart drug delivery, process control, and electronic applications. Copyright © 2015 Elsevier B.V. All rights reserved.
Adventures in Uncertainty: An Empirical Investigation of the Use of a Taylor's Series Approximation for the Assessment of Sampling Errors in Educational Research.

ERIC Educational Resources Information Center

Wilson, Mark

This study investigates the accuracy of the Woodruff-Causey technique for estimating sampling errors for complex statistics. The technique may be applied when data are collected by using multistage clustered samples. The technique was chosen for study because of its relevance to the correct use of multivariate analyses in educational survey…
Towards Optimal Design of Cancer Nanomedicines: Multi-stage Nanoparticles for the Treatment of Solid Tumors.

PubMed

Stylianopoulos, Triantafyllos; Economides, Eva-Athena; Baish, James W; Fukumura, Dai; Jain, Rakesh K

2015-09-01

Conventional drug delivery systems for solid tumors are composed of a nano-carrier that releases its therapeutic load. These two-stage nanoparticles utilize the enhanced permeability and retention (EPR) effect to enable preferential delivery to tumor tissue. However, the size-dependency of the EPR, the limited penetration of nanoparticles into the tumor as well as the rapid binding of the particles or the released cytotoxic agents to cancer cells and stromal components inhibit the uniform distribution of the drug and the efficacy of the treatment. Here, we employ mathematical modeling to study the effect of particle size, drug release rate and binding affinity on the distribution and efficacy of nanoparticles to derive optimal design rules. Furthermore, we introduce a new multi-stage delivery system. The system consists of a 20-nm primary nanoparticle, which releases 5-nm secondary particles, which in turn release the chemotherapeutic drug. We found that tuning the drug release kinetics and binding affinities leads to improved delivery of the drug. Our results also indicate that multi-stage nanoparticles are superior over two-stage nano-carriers provided they have a faster drug release rate and for high binding affinity drugs. Furthermore, our results suggest that smaller nanoparticles achieve better treatment outcome.

Determination of the Alternaria mycotoxin tenuazonic acid in cereals by high-performance liquid chromatography-electrospray ionization ion-trap multistage mass spectrometry after derivatization with 2,4-dinitrophenylhydrazine.

PubMed

Siegel, David; Rasenko, Tatjana; Koch, Matthias; Nehls, Irene

2009-05-22

Tenuazonic acid (TA) is a major Alternaria mycotoxin. In the present work a novel approach for the detection of TA in cereals by liquid chromatography-ion-trap multistage mass spectrometry after derivatization with 2,4-dinitrophenylhydrazine is described. The product of the derivatization reaction and its major MS(2) fragments were characterised by Fourier transform-ion cyclotron resonance tandem mass spectrometry. Without preconcentration, the established method features a limit of detection of 10 microg/kg using 2g of sample in a rapid workup procedure. Accuracy, precision and linearity were evaluated in the working range of 50-5000 microg/kg. TA was detected in 13 and quantified in 3 out of 27 cereal samples obtained from a local supermarket, the average content being 49 microg/kg (highest incidence: 851+/-41 microg/kg).
Cosmic ray exposure histories of Apollo 14, Apollo 15, and Apollo 16 rocks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eugster, O.; Eberhardt, P.

1984-02-15

The regolith exposure history of six rocks returned by the Apollo 14, 15, and 16 missions is studied based on the cosmogenic noble gas isotopes. For each sample, the complete set of all stable noble gas isotopes and the radiaoctive isotope Kr-81 were measured. Kr-81-Kr exposure ages are calculated for rocks for which a single-stage exposure can be demonstrated. A two-stage model exposure history is derived for multistage-exposure basalt 14310 based on the amounts and isotopic ratios of the cosmogenic noble gases. The apparent Kr-81-Kr age, the depth-sensitive isostopic ratios, and fission Xe-136 results lead to the conclusion that thismore » sample was preexposed 1.75 AE ago to cosmic rays for a duration of 350 m.y. Basalt 15058 and anorthosite 15415 also reveal multistage exposures. 44 references.« less
Determinants of customers' intention to participate in a Korean restaurant health promotion program: an application of the theory of planned behavior.

PubMed

Hong, Kyungeui; Gittelsohn, Joel; Joung, Hyojee

2010-06-01

The purpose of this study was to investigate the effects of personal characteristics and theory of planned behavior (TPB) constructs on the intention to participate in a restaurant health promotion program. In total, 830 adults residing in Seoul were sampled by a multi-stage cluster and random sampling design. Data were collected from a structured self-administered questionnaire, which covered variables concerning demographics, health status and TPB constructs including attitude, subjective norm and perceived behavioral control. A path analysis combining personal characteristics and TPB constructs was used to investigate determinants of the customers' intention. Positive and negative attitudes, subjective norms and perceived behavioral control directly affected the intention to participate. Demographics and health status both directly and indirectly affected the intention to participate. This study identifies personal characteristics and TPB constructs that are important to planning and implementing a restaurant health promotion program.
Gyrotron multistage depressed collector based on E × B drift concept using azimuthal electric field. I. Basic design

NASA Astrophysics Data System (ADS)

Wu, Chuanren; Pagonakis, Ioannis Gr.; Avramidis, Konstantinos A.; Gantenbein, Gerd; Illy, Stefan; Thumm, Manfred; Jelonnek, John

2018-03-01

Multistage Depressed Collectors (MDCs) are widely used in vacuum tubes to regain energy from the depleted electron beam. However, the design of an MDC for gyrotrons, especially for those deployed in fusion experiments and future power plants, is not trivial. Since gyrotrons require relatively high magnetic fields, their hollow annular electron beam is magnetically confined in the collector. In such a moderate magnetic field, the MDC concept based on E × B drift is very promising. Several concrete design approaches based on the E × B concept have been proposed. This paper presents a realizable design of a two-stage depressed collector based on the E × B concept. A collector efficiency of 77% is achievable, which will be able to increase the total gyrotron efficiency from currently 50% to more than 60%. Secondary electrons reduce the efficiency only by 1%. Moreover, the collector efficiency is resilient to the change of beam current (i.e., space charge repulsion) and beam misalignment as well as magnetic field perturbations. Therefore, compared to other E × B conceptual designs, this design approach is promising and fairly feasible.
Computer Program for Analysis, Design and Optimization of Propulsion, Dynamics, and Kinematics of Multistage Rockets

NASA Astrophysics Data System (ADS)

Lali, Mehdi

2009-03-01

A comprehensive computer program is designed in MATLAB to analyze, design and optimize the propulsion, dynamics, thermodynamics, and kinematics of any serial multi-staging rocket for a set of given data. The program is quite user-friendly. It comprises two main sections: "analysis and design" and "optimization." Each section has a GUI (Graphical User Interface) in which the rocket's data are entered by the user and by which the program is run. The first section analyzes the performance of the rocket that is previously devised by the user. Numerous plots and subplots are provided to display the performance of the rocket. The second section of the program finds the "optimum trajectory" via billions of iterations and computations which are done through sophisticated algorithms using numerical methods and incremental integrations. Innovative techniques are applied to calculate the optimal parameters for the engine and designing the "optimal pitch program." This computer program is stand-alone in such a way that it calculates almost every design parameter in regards to rocket propulsion and dynamics. It is meant to be used for actual launch operations as well as educational and research purposes.
Affective Structures among Students and Its Relationship with Academic Burnout with Emphasis on Gender

ERIC Educational Resources Information Center

Bikar, Somaye; Marziyeh, Afsaneh; Pourghaz, Abdolwahab

2018-01-01

This study aimed to determine the relationship between affective structures and academic burnout among male and female third-grade high school students in Zahedan in the academic year 2016-2017. The current descriptive-correlational study had a sample including 362 students selected using a multistage cluster sampling method. To collect data,…
Predicting Personality Resiliency by Psychological Well-Being and Its Components in Girl Students of Islamic Azad University

ERIC Educational Resources Information Center

Kajbafnezhad, Hadi; Khaneh Keshi, Ali

2015-01-01

The aim of this study was to predict psychological resilience by psychological well-being and its components. The research sample consisted of 216 girl students who were selected through multistage random sampling. The data were collected by implementing psychological resilience and psychological well-being questionnaire and analyzed by using…
The Relationship between Utilization of Computer Games and Spatial Abilities among High School Students

ERIC Educational Resources Information Center

Motamedi, Vahid; Yaghoubi, Razeyah Mohagheghyan

2015-01-01

This study aimed at investigating the relationship between computer game use and spatial abilities among high school students. The sample consisted of 300 high school male students selected through multi-stage cluster sampling. Data gathering tools consisted of a researcher made questionnaire (to collect information on computer game usage) and the…
Socio-Economic Background and Access to Internet as Correlates of Students' Achievement in Agricultural Science

ERIC Educational Resources Information Center

Adegoke, Sunday Paul; Osokoya, Modupe M.

2015-01-01

This study investigated access to internet and socio-economic background as correlates of students' achievement in Agricultural Science among selected Senior Secondary Schools Two Students in Ogbomoso South and North Local Government Areas. The study adopted multi-stage sampling technique. Simple random sampling was used to select 30 students from…
Lower-Order Compensation Chain Threshold-Reduction Technique for Multi-Stage Voltage Multipliers.

PubMed

Dell' Anna, Francesco; Dong, Tao; Li, Ping; Wen, Yumei; Azadmehr, Mehdi; Casu, Mario; Berg, Yngvar

2018-04-17

This paper presents a novel threshold-compensation technique for multi-stage voltage multipliers employed in low power applications such as passive and autonomous wireless sensing nodes (WSNs) powered by energy harvesters. The proposed threshold-reduction technique enables a topological design methodology which, through an optimum control of the trade-off among transistor conductivity and leakage losses, is aimed at maximizing the voltage conversion efficiency (VCE) for a given ac input signal and physical chip area occupation. The conducted simulations positively assert the validity of the proposed design methodology, emphasizing the exploitable design space yielded by the transistor connection scheme in the voltage multiplier chain. An experimental validation and comparison of threshold-compensation techniques was performed, adopting 2N5247 N-channel junction field effect transistors (JFETs) for the realization of the voltage multiplier prototypes. The attained measurements clearly support the effectiveness of the proposed threshold-reduction approach, which can significantly reduce the chip area occupation for a given target output performance and ac input signal.
Highly loaded multi-stage fan drive turbine-tandem blade configuration design

NASA Technical Reports Server (NTRS)

Evans, D. C.; Wolfmeyer, G. W.

1972-01-01

The results of the tandem blade configuration design study are reported. The three stage constant-inside-diameter turbine utilizes tandem blading in the stage two and stage three vanes and in the stage three blades. All other bladerows use plain blades. Blading detailed design is discussed, and design data are summarized. Steady-state stresses and vibratory behavior are discussed, and the results of the mechanical design analysis are presented.
Achieving integration in mixed methods designs-principles and practices.

PubMed

Fetters, Michael D; Curry, Leslie A; Creswell, John W

2013-12-01

Mixed methods research offers powerful tools for investigating complex processes and systems in health and health care. This article describes integration principles and practices at three levels in mixed methods research and provides illustrative examples. Integration at the study design level occurs through three basic mixed method designs-exploratory sequential, explanatory sequential, and convergent-and through four advanced frameworks-multistage, intervention, case study, and participatory. Integration at the methods level occurs through four approaches. In connecting, one database links to the other through sampling. With building, one database informs the data collection approach of the other. When merging, the two databases are brought together for analysis. With embedding, data collection and analysis link at multiple points. Integration at the interpretation and reporting level occurs through narrative, data transformation, and joint display. The fit of integration describes the extent the qualitative and quantitative findings cohere. Understanding these principles and practices of integration can help health services researchers leverage the strengths of mixed methods. © Health Research and Educational Trust.
Design and numerical investigations of a counter-rotating axial compressor for a geothermal power plant application

NASA Astrophysics Data System (ADS)

Qualman, Thomas, II

Geothermal provides a steady source of energy unlike other renewable sources, however, there are non-condensable gases (NCG's) that need to be removed before the steam enters the turbine/generator or the efficiency suffers. By utilizing a multistage counter-rotating axial compressor with integrated composite wound impellers the process of removing NCG's could be significantly improved. The novel composite impeller design provides a high level of corrosion resistance, a good strength to weight ratio, reduced size, and reduced manufacturing and maintenance costs. This thesis focuses on the design of the first 3 stages of a multistage counter-rotating axial compressor with integrated composite wound impellers for NCG removal. Because of the novel technique, an unusual set of constraints required a simplified 1 and 2D design methodology to be developed and investigated through CFD. The results indicate that by utilizing constant thickness blades with constant shroud radius (to ease manufacturing difficulties) a total pressure ratio of 1.37 with a total polytropic efficiency of 89.81% could be achieved.
Inspection logistics planning for multi-stage production systems with applications to semiconductor fabrication lines

NASA Astrophysics Data System (ADS)

Chen, Kyle Dakai

Since the market for semiconductor products has become more lucrative and competitive, research into improving yields for semiconductor fabrication lines has lately received a tremendous amount of attention. One of the most critical tasks in achieving such yield improvements is to plan the in-line inspection sampling efficiently so that any potential yield problems can be detected early and eliminated quickly. We formulate a multi-stage inspection planning model based on configurations in actual semiconductor fabrication lines, specifically taking into account both the capacity constraint and the congestion effects at the inspection station. We propose a new mixed First-Come-First-Serve (FCFS) and Last-Come-First-Serve (LCFS) discipline for serving the inspection samples to expedite the detection of potential yield problems. Employing this mixed FCFS and LCFS discipline, we derive approximate expressions for the queueing delays in yield problem detection time and develop near-optimal algorithms to obtain the inspection logistics planning policies. We also investigate the queueing performance with this mixed type of service discipline under different assumptions and configurations. In addition, we conduct numerical tests and generate managerial insights based on input data from actual semiconductor fabrication lines. To the best of our knowledge, this research is novel in developing, for the first time in the literature, near-optimal results for inspection logistics planning in multi-stage production systems with congestion effects explicitly considered.
AERODYNAMIC AND BLADING DESIGN OF MULTISTAGE AXIAL FLOW COMPRESSORS

NASA Technical Reports Server (NTRS)

Crouse, J. E.

1994-01-01

The axial-flow compressor is used for aircraft engines because it has distinct configuration and performance advantages over other compressor types. However, good potential performance is not easily obtained. The designer must be able to model the actual flows well enough to adequately predict aerodynamic performance. This computer program has been developed for computing the aerodynamic design of a multistage axial-flow compressor and, if desired, the associated blading geometry input for internal flow analysis. The aerodynamic solution gives velocity diagrams on selected streamlines of revolution at the blade row edges. The program yields aerodynamic and blading design results that can be directly used by flow and mechanical analysis codes. Two such codes are TSONIC, a blade-to-blade channel flow analysis code (COSMIC program LEW-10977), and MERIDL, a more detailed hub-to-shroud flow analysis code (COSMIC program LEW-12966). The aerodynamic and blading design program can reduce the time and effort required to obtain acceptable multistage axial-flow compressor configurations by generating good initial solutions and by being compatible with available analysis codes. The aerodynamic solution assumes steady, axisymmetric flow so that the problem is reduced to solving the two-dimensional flow field in the meridional plane. The streamline curvature method is used for the iterative aerodynamic solution at stations outside of the blade rows. If a blade design is desired, the blade elements are defined and stacked within the aerodynamic solution iteration. The blade element inlet and outlet angles are established by empirical incidence and deviation angles to the relative flow angles of the velocity diagrams. The blade element centerline is composed of two segments tangentially joined at a transition point. The local blade angle variation of each element can be specified as a fourth-degree polynomial function of path distance. Blade element thickness can also be specified with fourth-degree polynomial functions of path distance from the maximum thickness point. Input to the aerodynamic and blading design program includes the annulus profile, the overall compressor mass flow, the pressure ratio, and the rotative speed. A number of input parameters are also used to specify and control the blade row aerodynamics and geometry. The output from the aerodynamic solution has an overall blade row and compressor performance summary followed by blade element parameters for the individual blade rows. If desired, the blade coordinates in the streamwise direction for internal flow analysis codes and the coordinates on plane sections through blades for fabrication drawings may be stored and printed. The aerodynamic and blading design program for multistage axial-flow compressors is written in FORTRAN IV for batch execution and has been implemented on an IBM 360 series computer with a central memory requirement of approximately 470K of 8 bit bytes. This program was developed in 1981.
Computer program for aerodynamic and blading design of multistage axial-flow compressors

NASA Technical Reports Server (NTRS)

Crouse, J. E.; Gorrell, W. T.

1981-01-01

A code for computing the aerodynamic design of a multistage axial-flow compressor and, if desired, the associated blading geometry input for internal flow analysis codes is presented. Compressible flow, which is assumed to be steady and axisymmetric, is the basis for a two-dimensional solution in the meridional plane with viscous effects modeled by pressure loss coefficients and boundary layer blockage. The radial equation of motion and the continuity equation are solved with the streamline curvature method on calculation stations outside the blade rows. The annulus profile, mass flow, pressure ratio, and rotative speed are input. A number of other input parameters specify and control the blade row aerodynamics and geometry. In particular, blade element centerlines and thicknesses can be specified with fourth degree polynomials for two segments. The output includes a detailed aerodynamic solution and, if desired, blading coordinates that can be used for internal flow analysis codes.
Mean Line Pump Flow Model in Rocket Engine System Simulation

NASA Technical Reports Server (NTRS)

Veres, Joseph P.; Lavelle, Thomas M.

2000-01-01

A mean line pump flow modeling method has been developed to provide a fast capability for modeling turbopumps of rocket engines. Based on this method, a mean line pump flow code PUMPA has been written that can predict the performance of pumps at off-design operating conditions, given the loss of the diffusion system at the design point. The pump code can model axial flow inducers, mixed-flow and centrifugal pumps. The code can model multistage pumps in series. The code features rapid input setup and computer run time, and is an effective analysis and conceptual design tool. The map generation capability of the code provides the map information needed for interfacing with a rocket engine system modeling code. The off-design and multistage modeling capabilities of the code permit parametric design space exploration of candidate pump configurations and provide pump performance data for engine system evaluation. The PUMPA code has been integrated with the Numerical Propulsion System Simulation (NPSS) code and an expander rocket engine system has been simulated. The mean line pump flow code runs as an integral part of the NPSS rocket engine system simulation and provides key pump performance information directly to the system model at all operating conditions.
Off-design Performance Analysis of Multi-Stage Transonic Axial Compressors

NASA Astrophysics Data System (ADS)

Du, W. H.; Wu, H.; Zhang, L.

Because of the complex flow fields and component interaction in modern gas turbine engines, they require extensive experiment to validate performance and stability. The experiment process can become expensive and complex. Modeling and simulation of gas turbine engines are way to reduce experiment costs, provide fidelity and enhance the quality of essential experiment. The flow field of a transonic compressor contains all the flow aspects, which are difficult to present-boundary layer transition and separation, shock-boundary layer interactions, and large flow unsteadiness. Accurate transonic axial compressor off-design performance prediction is especially difficult, due in large part to three-dimensional blade design and the resulting flow field. Although recent advancements in computer capacity have brought computational fluid dynamics to forefront of turbomachinery design and analysis, the grid and turbulence model still limit Reynolds-average Navier-Stokes (RANS) approximations in the multi-stage transonic axial compressor flow field. Streamline curvature methods are still the dominant numerical approach as an important tool for turbomachinery to analyze and design, and it is generally accepted that streamline curvature solution techniques will provide satisfactory flow prediction as long as the losses, deviation and blockage are accurately predicted.
Quantitative Research on the Outcomes of China's Inland Tibetan Classes and Schools Policy: A Survey of Graduates

ERIC Educational Resources Information Center

Xiaorong, Wu

2015-01-01

Under the Inland Tibetan Classes and Schools Policy, China has trained a large number of personnel to facilitate the social, economic, and cultural development of Tibet. This study used a multistage, random sample survey to collect data on the comprehensive qualities of two sample groups of personnel in Tibet: graduates and nongraduates of inland…
The Role of Socio-Cognitive Variables in Predicting Learning Satisfaction in Smart Schools

ERIC Educational Resources Information Center

Firoozi, Mohammad Reza; Kazemi, Ali; Jokar, Maryam

2017-01-01

The present study aimed to investigate the role of Socio-Cognitive variables in predicting learning satisfaction in Smart Schools. The population was all the primary school students studying in smart schools in the city of Shiraz in the school year 2014-2015. The sample, randomly chosen through multi-stage cluster sampling, was 383 primary school…

Teachers' Methodologies and Sources of Information on HIV/AIDS for Students with Visual Impairments in Selected Residential and Integrated Schools in Ghana

ERIC Educational Resources Information Center

Hayford, Samuel K.; Ocansey, Frederick

2017-01-01

This study reports part of a national survey on sources of information, education and communication materials on HIV/AIDS available to students with visual impairments in residential, segregated, and integrated schools in Ghana. A multi-staged stratified random sampling procedure and a purposive and simple random sampling approach, where…
Design and operation of the national home health aide survey: 2007-2008.

PubMed

Bercovitz, Anita; Moss, Abigail J; Sengupta, Manisha; Harris-Kojetin, Lauren D; Squillace, Marie R; Emily, Rosenoff; Branden, Laura

2010-03-01

This report provides an overview of the National Home Health Aide Survey (NHHAS), the first national probability survey of home health aides. NHHAS was designed to provide national estimates of home health aides who provided assistance in activities of daily living (ADLs) and were directly employed by agencies that provide home health and/or hospice care. This report discusses the need for and objectives of the survey, the design process, the survey methods, and data availability. METHODS NHHAS, a multistage probability sample survey, was conducted as a supplement to the 2007 National Home and Hospice Care Survey (NHHCS). Agencies providing home health and/or hospice care were sampled, and then aides employed by these agencies were sampled and interviewed by telephone. Survey topics included recruitment, training, job history, family life, client relations, work-related injuries, and demographics. NHHAS was virtually identical to the 2004 National Nursing Assistant Survey of certified nursing assistants employed in sampled nursing homes with minor changes to account for differences in workplace environment and responsibilities. RESULTS From September 2007 to April 2008, interviews were completed with 3,416 aides. A public-use data file that contains the interview responses, sampling weights, and design variables is available. The NHHAS overall response rate weighted by the inverse of the probability of selection was 41 percent. This rate is the product of the weighted first-stage agency response rate of 57 percent (i.e., weighted response rate of 59 percent for agency participation in NHHCS times the weighted response rate of 97 percent for agencies participating in NHHCS that also participated in NHHAS) and the weighted second-stage aide response rate of 72 percent to NHHAS.
Multistage estimation of received carrier signal parameters under very high dynamic conditions of the receiver

NASA Technical Reports Server (NTRS)

Kumar, Rajendra (Inventor)

1991-01-01

A multistage estimator is provided for the parameters of a received carrier signal possibly phase-modulated by unknown data and experiencing very high Doppler, Doppler rate, etc., as may arise, for example, in the case of Global Positioning Systems (GPS) where the signal parameters are directly related to the position, velocity and jerk of the GPS ground-based receiver. In a two-stage embodiment of the more general multistage scheme, the first stage, selected to be a modified least squares algorithm referred to as differential least squares (DLS), operates as a coarse estimator resulting in higher rms estimation errors but with a relatively small probability of the frequency estimation error exceeding one-half of the sampling frequency, provides relatively coarse estimates of the frequency and its derivatives. The second stage of the estimator, an extended Kalman filter (EKF), operates on the error signal available from the first stage refining the overall estimates of the phase along with a more refined estimate of frequency as well and in the process also reduces the number of cycle slips.
Estimation and Selection via Absolute Penalized Convex Minimization And Its Multistage Adaptive Applications

PubMed Central

Huang, Jian; Zhang, Cun-Hui

2013-01-01

The ℓ1-penalized method, or the Lasso, has emerged as an important tool for the analysis of large data sets. Many important results have been obtained for the Lasso in linear regression which have led to a deeper understanding of high-dimensional statistical problems. In this article, we consider a class of weighted ℓ1-penalized estimators for convex loss functions of a general form, including the generalized linear models. We study the estimation, prediction, selection and sparsity properties of the weighted ℓ1-penalized estimator in sparse, high-dimensional settings where the number of predictors p can be much larger than the sample size n. Adaptive Lasso is considered as a special case. A multistage method is developed to approximate concave regularized estimation by applying an adaptive Lasso recursively. We provide prediction and estimation oracle inequalities for single- and multi-stage estimators, a general selection consistency theorem, and an upper bound for the dimension of the Lasso estimator. Important models including the linear regression, logistic regression and log-linear models are used throughout to illustrate the applications of the general results. PMID:24348100
Multistage estimation of received carrier signal parameters under very high dynamic conditions of the receiver

NASA Technical Reports Server (NTRS)

Kumar, Rajendra (Inventor)

1990-01-01

A multistage estimator is provided for the parameters of a received carrier signal possibly phase-modulated by unknown data and experiencing very high Doppler, Doppler rate, etc., as may arise, for example, in the case of Global Positioning Systems (GPS) where the signal parameters are directly related to the position, velocity and jerk of the GPS ground-based receiver. In a two-stage embodiment of the more general multistage scheme, the first stage, selected to be a modified least squares algorithm referred to as differential least squares (DLS), operates as a coarse estimator resulting in higher rms estimation errors but with a relatively small probability of the frequency estimation error exceeding one-half of the sampling frequency, provides relatively coarse estimates of the frequency and its derivatives. The second stage of the estimator, an extended Kalman filter (EKF), operates on the error signal available from the first stage refining the overall estimates of the phase along with a more refined estimate of frequency as well and in the process also reduces the number of cycle slips.
A novel multi-stage direct contact membrane distillation module: Design, experimental and theoretical approaches.

PubMed

Lee, Jung-Gil; Kim, Woo-Seung; Choi, June-Seok; Ghaffour, Noreddine; Kim, Young-Deuk

2016-12-15

An economic desalination system with a small scale and footprint for remote areas, which have a limited and inadequate water supply, insufficient water treatment and low infrastructure, is strongly demanded in the desalination markets. Here, a direct contact membrane distillation (DCMD) process has the simplest configuration and potentially the highest permeate flux among all of the possible MD processes. This process can also be easily instituted in a multi-stage manner for enhanced compactness, productivity, versatility and cost-effectiveness. In this study, an innovative, multi-stage, DCMD module under countercurrent-flow configuration is first designed and then investigate both theoretically and experimentally to identify its feasibility and operability for desalination application. Model predictions and measured data for mean permeate flux are compared and shown to be in good agreement. The effect of the number of module stages on the mean permeate flux, performance ratio and daily water production of the MDCMD system has been theoretically identified at inlet feed and permeate flow rates of 1.5 l/min and inlet feed and permeate temperatures of 70 °C and 25 °C, respectively. The daily water production of a three-stage DCMD module with a membrane area of 0.01 m 2 at each stage is found to be 21.5 kg. Copyright © 2016 Elsevier Ltd. All rights reserved.
Multi-Stage System for Automatic Target Recognition

NASA Technical Reports Server (NTRS)

Chao, Tien-Hsin; Lu, Thomas T.; Ye, David; Edens, Weston; Johnson, Oliver

2010-01-01

A multi-stage automated target recognition (ATR) system has been designed to perform computer vision tasks with adequate proficiency in mimicking human vision. The system is able to detect, identify, and track targets of interest. Potential regions of interest (ROIs) are first identified by the detection stage using an Optimum Trade-off Maximum Average Correlation Height (OT-MACH) filter combined with a wavelet transform. False positives are then eliminated by the verification stage using feature extraction methods in conjunction with neural networks. Feature extraction transforms the ROIs using filtering and binning algorithms to create feature vectors. A feedforward back-propagation neural network (NN) is then trained to classify each feature vector and to remove false positives. The system parameter optimizations process has been developed to adapt to various targets and datasets. The objective was to design an efficient computer vision system that can learn to detect multiple targets in large images with unknown backgrounds. Because the target size is small relative to the image size in this problem, there are many regions of the image that could potentially contain the target. A cursory analysis of every region can be computationally efficient, but may yield too many false positives. On the other hand, a detailed analysis of every region can yield better results, but may be computationally inefficient. The multi-stage ATR system was designed to achieve an optimal balance between accuracy and computational efficiency by incorporating both models. The detection stage first identifies potential ROIs where the target may be present by performing a fast Fourier domain OT-MACH filter-based correlation. Because threshold for this stage is chosen with the goal of detecting all true positives, a number of false positives are also detected as ROIs. The verification stage then transforms the regions of interest into feature space, and eliminates false positives using an artificial neural network classifier. The multi-stage system allows tuning the detection sensitivity and the identification specificity individually in each stage. It is easier to achieve optimized ATR operation based on its specific goal. The test results show that the system was successful in substantially reducing the false positive rate when tested on a sonar and video image datasets.
Oil-free centrifugal hydrogen compression technology demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heshmat, Hooshang

2014-05-31

One of the key elements in realizing a mature market for hydrogen vehicles is the deployment of a safe and efficient hydrogen production and delivery infrastructure on a scale that can compete economically with current fuels. The challenge, however, is that hydrogen, being the lightest and smallest of gases with a lower viscosity and density than natural gas, readily migrates through small spaces and is difficult to compresses efficiently. While efficient and cost effective compression technology is crucial to effective pipeline delivery of hydrogen, the compression methods used currently rely on oil lubricated positive displacement (PD) machines. PD compression technologymore » is very costly, has poor reliability and durability, especially for components subjected to wear (e.g., valves, rider bands and piston rings) and contaminates hydrogen with lubricating fluid. Even so called “oil-free” machines use oil lubricants that migrate into and contaminate the gas path. Due to the poor reliability of PD compressors, current hydrogen producers often install duplicate units in order to maintain on-line times of 98-99%. Such machine redundancy adds substantially to system capital costs. As such, DOE deemed that low capital cost, reliable, efficient and oil-free advanced compressor technologies are needed. MiTi’s solution is a completely oil-free, multi-stage, high-speed, centrifugal compressor designed for flow capacity of 500,000 kg/day with a discharge pressure of 1200 psig. The design employs oil-free compliant foil bearings and seals to allow for very high operating speeds, totally contamination free operation, long life and reliability. This design meets the DOE’s performance targets and achieves an extremely aggressive, specific power metric of 0.48 kW-hr/kg and provides significant improvements in reliability/durability, energy efficiency, sealing and freedom from contamination. The multi-stage compressor system concept has been validated through full scale performance testing of a single stage with helium similitude gas at full speed in accordance with ASME PTC-10. The experimental results indicated that aerodynamic performance, with respect to compressor discharge pressure, flow, power and efficiency exceeded theoretical prediction. Dynamic testing of a simulated multistage centrifugal compressor was also completed under a parallel program to validate the integrity and viability of the system concept. The results give strong confidence in the feasibility of the multi-stage design for use in hydrogen gas transportation and delivery from production locations to point of use.« less
A New Numerical Simulation technology of Multistage Fracturing in Horizontal Well

NASA Astrophysics Data System (ADS)

Cheng, Ning; Kang, Kaifeng; Li, Jianming; Liu, Tao; Ding, Kun

2017-11-01

Horizontal multi-stage fracturing is recognized the effective development technology of unconventional oil resources. Geological mechanics in the numerical simulation of hydraulic fracturing technology occupies very important position, compared with the conventional numerical simulation technology, because of considering the influence of geological mechanics. New numerical simulation of hydraulic fracturing can more effectively optimize the design of fracturing and evaluate the production after fracturing. This paper studies is based on the three-dimensional stress and rock physics parameters model, using the latest fluid-solid coupling numerical simulation technology to engrave the extension process of fracture and describes the change of stress field in fracturing process, finally predict the production situation.
Aerodynamic and heat transfer analysis of the low aspect ratio turbine

NASA Astrophysics Data System (ADS)

Sharma, O. P.; Nguyen, P.; Ni, R. H.; Rhie, C. M.; White, J. A.

1987-06-01

The available two- and three-dimensional codes are used to estimate external heat loads and aerodynamic characteristics of a highly loaded turbine stage in order to demonstrate state-of-the-art methodologies in turbine design. By using data for a low aspect ratio turbine, it is found that a three-dimensional multistage Euler code gives good averall predictions for the turbine stage, yielding good estimates of the stage pressure ratio, mass flow, and exit gas angles. The nozzle vane loading distribution is well predicted by both the three-dimensional multistage Euler and three-dimensional Navier-Stokes codes. The vane airfoil surface Stanton number distributions, however, are underpredicted by both two- and three-dimensional boundary value analysis.
Core compressor exit stage study. Volume 4: Data and performance report for the best stage configuration

NASA Technical Reports Server (NTRS)

Wisler, D. C.

1981-01-01

The core compressor exit stage study program develops rear stage blading designs that have lower losses in their endwall boundary layer regions. The test data and performance results for the best stage configuration consisting of Rotor-B running with Stator-B are described. The technical approach in this efficiency improvement program utilizes a low speed research compressor. Tests were conducted in two ways: (1) to use four identical stages of blading to obtain test data in a true multistage environment and (2) to use a single stage of blading to compare with the multistage test results. The effects of increased rotor tip clearances and circumferential groove casing treatment are evaluated.
A Profile of Puerto Rican Health in the United States: Data from the Hispanic Health and Nutrition Examination Survey 1982-84.

ERIC Educational Resources Information Center

Munoz, Eric; And Others

The health conditions and health status of Hispanic Americans will assume increased importance as their population increases. The goal of this book of charts is to present data from the Hispanic Health and Nutrition Examination Survey (HHANES) on Puerto Ricans. The Puerto Rican HHANES sampling procedure is a multi-stage probability sample of…
Relationship between the Religious Attitude, Self-Efficacy, and Life Satisfaction in High School Teachers of Mahshahr City

ERIC Educational Resources Information Center

Bigdeloo, Masoomeh; Bozorgi, Zahra Dasht

2016-01-01

This study aims to investigate the relationship between the religious attitude, self-efficacy, and life satisfaction in high school teachers of Mahshahr City. To this end, 253 people of all high school teachers in Mahshahr City, in Iran were selected as the sample using the multistage cluster sampling method. For data collection, Glock and Stark's…
A Gender Based Study on Job Satisfaction among Higher Secondary School Heads in Khyber Pakhtunkhwa, (Pakistan)

ERIC Educational Resources Information Center

Mumtaz, Safina; Suleman, Qaiser; Ahmad, Zubair

2016-01-01

The purpose of the study was to analyze and compare the job satisfaction with twenty dimensions of male and female higher secondary school heads in Khyber Pakhtunkhwa. A total of 108 higher secondary school heads were selected from eleven districts as sample through multi-stage sampling technique in which 66 were male and 42 were female. The study…
Current Multistage Drug Delivery Systems Based on the Tumor Microenvironment

PubMed Central

Chen, Binlong; Dai, Wenbing; He, Bing; Zhang, Hua; Wang, Xueqing; Wang, Yiguang; Zhang, Qiang

2017-01-01

The development of traditional tumor-targeted drug delivery systems based on EPR effect and receptor-mediated endocytosis is very challenging probably because of the biological complexity of tumors as well as the limitations in the design of the functional nano-sized delivery systems. Recently, multistage drug delivery systems (Ms-DDS) triggered by various specific tumor microenvironment stimuli have emerged for tumor therapy and imaging. In response to the differences in the physiological blood circulation, tumor microenvironment, and intracellular environment, Ms-DDS can change their physicochemical properties (such as size, hydrophobicity, or zeta potential) to achieve deeper tumor penetration, enhanced cellular uptake, timely drug release, as well as effective endosomal escape. Based on these mechanisms, Ms-DDS could deliver maximum quantity of drugs to the therapeutic targets including tumor tissues, cells, and subcellular organelles and eventually exhibit the highest therapeutic efficacy. In this review, we expatiate on various responsive modes triggered by the tumor microenvironment stimuli, introduce recent advances in multistage nanoparticle systems, especially the multi-stimuli responsive delivery systems, and discuss their functions, effects, and prospects. PMID:28255348
Three-dimensional turbopump flowfield analysis

NASA Technical Reports Server (NTRS)

Sharma, O. P.; Belford, K. A.; Ni, R. H.

1992-01-01

A program was conducted to develop a flow prediction method applicable to rocket turbopumps. The complex nature of a flowfield in turbopumps is described and examples of flowfields are discussed to illustrate that physics based models and analytical calculation procedures based on computational fluid dynamics (CFD) are needed to develop reliable design procedures for turbopumps. A CFD code developed at NASA ARC was used as the base code. The turbulence model and boundary conditions in the base code were modified, respectively, to: (1) compute transitional flows and account for extra rates of strain, e.g., rotation; and (2) compute surface heat transfer coefficients and allow computation through multistage turbomachines. Benchmark quality data from two and three-dimensional cascades were used to verify the code. The predictive capabilities of the present CFD code were demonstrated by computing the flow through a radial impeller and a multistage axial flow turbine. Results of the program indicate that the present code operated in a two-dimensional mode is a cost effective alternative to full three-dimensional calculations, and that it permits realistic predictions of unsteady loadings and losses for multistage machines.
Current Multistage Drug Delivery Systems Based on the Tumor Microenvironment.

PubMed

Chen, Binlong; Dai, Wenbing; He, Bing; Zhang, Hua; Wang, Xueqing; Wang, Yiguang; Zhang, Qiang

2017-01-01

The development of traditional tumor-targeted drug delivery systems based on EPR effect and receptor-mediated endocytosis is very challenging probably because of the biological complexity of tumors as well as the limitations in the design of the functional nano-sized delivery systems. Recently, multistage drug delivery systems (Ms-DDS) triggered by various specific tumor microenvironment stimuli have emerged for tumor therapy and imaging. In response to the differences in the physiological blood circulation, tumor microenvironment, and intracellular environment, Ms-DDS can change their physicochemical properties (such as size, hydrophobicity, or zeta potential) to achieve deeper tumor penetration, enhanced cellular uptake, timely drug release, as well as effective endosomal escape. Based on these mechanisms, Ms-DDS could deliver maximum quantity of drugs to the therapeutic targets including tumor tissues, cells, and subcellular organelles and eventually exhibit the highest therapeutic efficacy. In this review, we expatiate on various responsive modes triggered by the tumor microenvironment stimuli, introduce recent advances in multistage nanoparticle systems, especially the multi-stimuli responsive delivery systems, and discuss their functions, effects, and prospects.
American Healthy Homes Survey: A National Study of Residential Pesticides Measured from Floor Wipes.

EPA Science Inventory

The U.S. Department of Housing and Urban Development in collaboration with the United States Environmental Protection Agency conducted a survey measuring lead, allergens, and insecticides in a randomly selected nationally representative sample of resodential homes. Multistage sa...
Work Adjustment of Vocational Education Teachers.

ERIC Educational Resources Information Center

Muncrief, Martha Crawford

To investigate work adjustment of vocational education teachers, a nation-wide study was conducted focusing on vocational needs, job satisfaction, and job success. The study involved 180 secondary teachers from three vocational areas, business, home economics, and industrial education. A multistage sampling process was utilized to select…
A microprocessor-based automation test system for the experiment of the multi-stage compressor

NASA Astrophysics Data System (ADS)

Zhang, Huisheng; Lin, Chongping

1991-08-01

An automation test system that is controlled by the microprocessor and used in the multistage compressor experiment is described. Based on the analysis of the compressor experiment performances, a complete hardware system structure is set up. It is composed of a IBM PC/XT computer, a large scale sampled data system, the moving machine with three directions, the scanners, the digital instrumentation and some output devices. A program structure of real-time software system is described. The testing results show that this test system can take the measure of many parameter magnitudes in the blade row places and on a boundary layer in different states. The automatic extent and the accuracy of experiment is increased and the experimental cost is reduced.

Optimal placement of water-lubricated rubber bearings for vibration reduction of flexible multistage rotor systems

NASA Astrophysics Data System (ADS)

Liu, Shibing; Yang, Bingen

2017-10-01

Flexible multistage rotor systems with water-lubricated rubber bearings (WLRBs) have a variety of engineering applications. Filling a technical gap in the literature, this effort proposes a method of optimal bearing placement that minimizes the vibration amplitude of a WLRB-supported flexible rotor system with a minimum number of bearings. In the development, a new model of WLRBs and a distributed transfer function formulation are used to define a mixed continuous-and-discrete optimization problem. To deal with the case of uncertain number of WLRBs in rotor design, a virtual bearing method is devised. Solution of the optimization problem by a real-coded genetic algorithm yields the locations and lengths of water-lubricated rubber bearings, by which the prescribed operational requirements for the rotor system are satisfied. The proposed method is applicable either to preliminary design of a new rotor system with the number of bearings unforeknown or to redesign of an existing rotor system with a given number of bearings. Numerical examples show that the proposed optimal bearing placement is efficient, accurate and versatile in different design cases.
Integrated Multidisciplinary Design of High Pressure Multistage Compressor Systems (la Conception integree des compresseurs multi-etage a haute performance)

DTIC Science & Technology

1998-09-01

development ONERA and SNECMA and is described in [Nicoud, 91]. This methodology [ Karadimas , 1997]. The aim of all efforts method solves the Quasi-3D...computer power, 1994 2-11 BERTHILLIER, M., DUPONT, C., MONDAL, R., KARADIMAS , G. : New Ways for the Design the BARRAU, J.J. : Blade Forced Response
Modeling the Psychometric Properties of Complex Performance Assessment Tasks Using Confirmatory Factor Analysis: A Multistage Model for Calibrating Tasks

ERIC Educational Resources Information Center

Kahraman, Nilufer; De Champlain, Andre; Raymond, Mark

2012-01-01

Item-level information, such as difficulty and discrimination are invaluable to the test assembly, equating, and scoring practices. Estimating these parameters within the context of large-scale performance assessments is often hindered by the use of unbalanced designs for assigning examinees to tasks and raters because such designs result in very…
Development of a Multiple-Stage Differential Mobility Analyzer (MDMA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Da-Ren; Cheng, Mengdawn

2007-01-01

A new DMA column has been designed with the capability of simultaneously extracting monodisperse particles of different sizes in multiple stages. We call this design a multistage DMA, or MDMA. A prototype MDMA has been constructed and experimentally evaluated in this study. The new column enables the fast measurement of particles in a wide size range, while preserving the powerful particle classification function of a DMA. The prototype MDMA has three sampling stages, capable of classifying monodisperse particles of three different sizes simultaneously. The scanning voltage operation of a DMA can be applied to this new column. Each stage ofmore » MDMA column covers a fraction of the entire particle size range to be measured. The covered size fractions of two adjacent stages of the MDMA are designed somewhat overlapped. The arrangement leads to the reduction of scanning voltage range and thus the cycling time of the measurement. The modular sampling stage design of the MDMA allows the flexible configuration of desired particle classification lengths and variable number of stages in the MDMA. The design of our MDMA also permits operation at high sheath flow, enabling high-resolution particle size measurement and/or reduction of the lower sizing limit. Using the tandem DMA technique, the performance of the MDMA, i.e., sizing accuracy, resolution, and transmission efficiency, was evaluated at different ratios of aerosol and sheath flowrates. Two aerosol sampling schemes were investigated. One was to extract aerosol flows at an evenly partitioned flowrate at each stage, and the other was to extract aerosol at a rate the same as the polydisperse aerosol flowrate at each stage. We detail the prototype design of the MDMA and the evaluation result on the transfer functions of the MDMA at different particle sizes and operational conditions.« less
The Australian longitudinal study on male health sampling design and survey weighting: implications for analysis and interpretation of clustered data.

PubMed

Spittal, Matthew J; Carlin, John B; Currier, Dianne; Downes, Marnie; English, Dallas R; Gordon, Ian; Pirkis, Jane; Gurrin, Lyle

2016-10-31

The Australian Longitudinal Study on Male Health (Ten to Men) used a complex sampling scheme to identify potential participants for the baseline survey. This raises important questions about when and how to adjust for the sampling design when analyzing data from the baseline survey. We describe the sampling scheme used in Ten to Men focusing on four important elements: stratification, multi-stage sampling, clustering and sample weights. We discuss how these elements fit together when using baseline data to estimate a population parameter (e.g., population mean or prevalence) or to estimate the association between an exposure and an outcome (e.g., an odds ratio). We illustrate this with examples using a continuous outcome (weight in kilograms) and a binary outcome (smoking status). Estimates of a population mean or disease prevalence using Ten to Men baseline data are influenced by the extent to which the sampling design is addressed in an analysis. Estimates of mean weight and smoking prevalence are larger in unweighted analyses than weighted analyses (e.g., mean = 83.9 kg vs. 81.4 kg; prevalence = 18.0 % vs. 16.7 %, for unweighted and weighted analyses respectively) and the standard error of the mean is 1.03 times larger in an analysis that acknowledges the hierarchical (clustered) structure of the data compared with one that does not. For smoking prevalence, the corresponding standard error is 1.07 times larger. Measures of association (mean group differences, odds ratios) are generally similar in unweighted or weighted analyses and whether or not adjustment is made for clustering. The extent to which the Ten to Men sampling design is accounted for in any analysis of the baseline data will depend on the research question. When the goals of the analysis are to estimate the prevalence of a disease or risk factor in the population or the magnitude of a population-level exposure-outcome association, our advice is to adopt an analysis that respects the sampling design.
Development of a Multistage Reliability-Based Design Optimization Method

DTIC Science & Technology

2014-01-01

expressed using Eq. (7), where nx is the number of design variables P a0 þ Xnx i¼1 aini þ bið Þxi 0 " # a (7) Figures 3(a)–3(c) illustrates the...constraint equation can be expressed in the gen- eral form of Eq. (16), where again nx is the number of design variables P a0;j þ Xnx i¼1 ai;jnixi
American Healthy Homes Survey: A National Study of Residential Phthalates Measured from Floor Wipes

EPA Science Inventory

The United States Environmental Protection Agency (U.S. EPA), in collaboration with the U.S. Department of Housing and Urban Development (HUD), conducted a survey measuring phthalates in randomly selected residential homes throughout the U.S. Multistage sampling with clustering w...
Pathways between Acculturation and Health: Does the Measure Matter?

ERIC Educational Resources Information Center

Miranda, Patricia Y.; Gonzalez, Hector M.; Tarraf, Wassim

2011-01-01

The purpose of this study was to assess the association between acculturation and functional health using multiple proxies of acculturation to examine explanatory pathways to clarify disparate health findings. A population-based cross-sectional, multistage probability sample from the Hispanic Established Populations for the Epidemiologic Studies…
Entrepreneurial Attributes among Postgraduate Students of a Pakistani University

ERIC Educational Resources Information Center

Ali, Akhtar; Topping, Keith J.; Tariq, Riaz H.

2010-01-01

This paper explores entrepreneurial attributes among the students of The Islamia University of Bahawalpur, a public sector Pakistani university. Multistage sampling was employed to maximize the representation. Five hundred and twenty one master's level students from thirty departments returned completed questionnaires. Three factors emerged: self…
SOURCE SAMPLING FINE PARTICULATE MATTER: WOOD-FIRED INDUSTRIAL BOILER

EPA Science Inventory

The report provides a profile for a wood-fired industrial boiler equipped with a multistage electrostatic precipitator control device. Along with the profile of emissions of fine particulate matter of aerodynamic diameter of 2.5 micrometers or less (PM-2.5), data are also provide...
Relating monolithic and granular leaching from contaminated soil treated with different cementitious binders.

PubMed

Kogbara, Reginald B; Al-Tabbaa, Abir; Stegemann, Julia A

2013-01-01

This work employed a clayey, silty, sandy gravel contaminated with a mixture of metals (Cd, Cu, Pb, Ni and Zn) and diesel. The contaminated soil was treated with 5 and 10% dosages of different cementitious binders. The binders include Portland cement, cement-fly ash, cement-slag and lime-slag mixtures. Monolithic leaching from the treated soils was evaluated over a 64-day period alongside granular leachability of 49- and 84-day old samples. Surface wash-off was the predominant leaching mechanism for monolithic samples. In this condition, with data from different binders and curing ages combined, granular leachability as a function of monolithic leaching generally followed degrees 4 and 6 polynomial functions. The only exception was for Cu, which followed the multistage dose-response model. The relationship between both leaching tests varied with the type of metal, curing age/residence time of monolithic samples in the leachant, and binder formulation. The results provide useful design information on the relationship between leachability of metals from monolithic forms of S/S treated soils and the ultimate leachability in the eventual breakdown of the stabilized/solidified soil.
Progress in the planar CPn SOFC system design verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elangovan, S.; Hartvigsen, J.; Khandkar, A.

1996-04-01

SOFCo is developing a high efficiency, modular and scaleable planar SOFC module termed the CPn design. This design has been verified in a 1.4 kW module test operated directly on pipeline natural gas. The design features multistage oxidation of fuel wherein the fuel is consumed incrementally over several stages. High efficiency is achieved by uniform current density distribution per stage, which lowers the stack resistance. Additional benefits include thermal regulation and compactness. Test results from stack modules operating in pipeline natural gas are presented.
Design of Advanced Blading for a High-Speed HP Compressor Using an S1-S2 Flow Calculation System.

DTIC Science & Technology

1990-11-01

Howell multistage compressor speed squared) and pressure ratio for the initial prediction method (7), with an arbitrary increase of design are given in...improved performance of axial compressors with leading designs to be produced with the current SI-S2 edge normal shock waves, system. However, it is...performance of the new (7) Howell A R and Calvert W J, A new stage- design was extremely encouraging, with a peak stacking technique for axial -flow
Violations of the international code of marketing of breast milk substitutes: prevalence in four countries

PubMed Central

Taylor, Anna

1998-01-01

Objective: To estimate the prevalence of violations of the international code of marketing of substitutes for breast milk in one city in each of Bangladesh, Poland, South Africa, and Thailand. Design: Multistage random sampling was used to select pregnant women and mothers of infants ⩽6 months old to interview at health facilities. Women were asked whether they had received free samples of substitutes for breast milk (including infant formula designed to meet the nutritional needs of infants from birth to 4 to 6 months of age, follow on formula designed to replace infant formula at the age of 4 to 6 months, and complementary foods for infants aged ⩽6 months), bottles, or teats. The source of the free sample and when it had been given to the women was also determined. 3 health workers were interviewed at each facility to assess whether the facility had received free samples, to determine how they had been used, and to determine whether gifts had been given to health workers by companies that manufactured or distributed breast milk substitutes. Compliance with the marketing code for information given to health workers was evaluated using a checklist. Setting: Health facilities in Dhaka, Bangladesh; Warsaw, Poland; Durban, South Africa; and Bangkok, Thailand. Subjects: 1468 pregnant women, 1582 mothers of infants aged ⩽6 months, and 466 health workers at 165 health facilities. Main outcome measures: Number of free samples received by pregnant women, mothers, and health workers; number of gifts given to health workers; and availability of information that violated the code in health facilities. Results: 97 out of 370 (26%) mothers in Bangkok reported receiving free samples of breast milk substitutes, infant formula, bottles, or teats compared with only 1 out of 385 mothers in Dhaka. Across the four cities from 3 out of 40 (8%) to 20 out of 40 (50%) health facilities had received free samples which were not being used for research or professional evaluation; from 2 out of 123 (2%) to 21 out of 119 (18%) health workers had received gifts from companies involved in the manufacturing or distribution of breast milk substitutes. From 6 out of 40 (15%) to 22 out of 39 (56%) health facilities information that violated the code had been provided by companies and was available to staff. Conclusion: Violations of the code were detected with a simple survey instrument in all of the four countries studied. Governmental and non-governmental agencies should monitor the prevalence of code violations using the simple methodology developed for this study. Key messages A simple multistage random sampling procedure can be used to interview women and health professionals to assess whether violations of the international code of marketing of substitutes for breast milk are occurring 3050 women and 466 health professionals were interviewed at 165 health facilities in Bangladesh, Poland, South Africa, and Thailand 97 out of 370 mothers in Bangkok reported receiving free samples of breast milk substitutes, infant formula, bottles, or teats compared with only 1 out of 385 mothers in Dhaka. In Bangkok health workers reported that 20 out of 40 health facilities had also received free samples. Most free samples were distributed by health facilities In Warsaw 56% of facilities surveyed were found to have information available for health workers that had been provided by manufacturers or distributors of breast milk substitutes in contravention of the code; 18% of health workers in Warsaw had received free gifts from manufacturers PMID:9552947
Analytical and experimental performance of a dual-mode traveling wave tube and multistage depressed collector

NASA Technical Reports Server (NTRS)

Ramins, Peter; Force, Dale A.; Kosmahl, Henry G.

1987-01-01

A computational procedure for the design of traveling-wave-tube(TWT)/refocuser/multistage depressed collector (MDC) systems was used to design a short, permanent-magnet refocusing system and a highly efficient MDC for a medium-power, dual-mode, 4.8- to 9.6-GHz TWT. The computations were carried out with advanced, multidimensional computer programs which model the electron beam and follow the trajectories of representative charges from the radiofrequency (RF) input of the TWT, through the slow-wave structure and refocusing section, to their points of impact in the depressed collector. Secondary emission losses in the MDC were treated semiquantitatively by injecting representative secondary-electron-emission current into the MDA analysis at the point of impact of each primary beam. A comparison of computed and measured TWT and MDC performance showed very good agreement. The electrodes of the MDC were fabricated from a particluar form of isptropic graphite that was selected for its low secondary electron yield, ease of machinability, and vacuum properties.
Astronautics

NASA Technical Reports Server (NTRS)

1977-01-01

Principles of rocket engineering, flight dynamics, and trajectories are discussed in this summary of Soviet rocket development and technology. Topics include rocket engine design, propellants, propulsive efficiency, and capabilities required for orbital launch. The design of the RD 107, 108, 119, and 214 rocket engines and their uses in various satellite launches are described. NASA's Saturn 5 and Atlas Agena launch vehicles are used to illustrate the requirements of multistage rockets.
Alcohol and Sexual Consent Scale: Development and Validation

ERIC Educational Resources Information Center

Ward, Rose Marie; Matthews, Molly R.; Weiner, Judith; Hogan, Kathryn M.; Popson, Halle C.

2012-01-01

Objective: To establish a short measure of attitudes toward sexual consent in the context of alcohol consumption. Methods: Using a multistage and systematic measurement development process, the investigators developed the Alcohol and Sexual Consent Scale using a sample of college students. Results: The resulting 12-item scale, the Alcohol and…
[Prevalence of Variants in the Apolipoprotein E (APOE) Gene in a General Population of Adults from an Urban Area of Medellin (Antioquia)].

PubMed

Arango Viana, Juan Carlos; Valencia, Ana Victoria; Páez, Ana Lucía; Montoya Gómez, Nilton; Palacio, Carlos; Arbeláez, María Patricia; Bedoya Berrío, Gabriel; García Valencia, Jenny

2014-01-01

To determine the allelic and genotype frequencies of apolipoproteine E (APOE) gene in a representative sample of the adult population of Medellin in 2010. A representative sample of the adult population of Medellin, was obtained by means of a multi-stage, stratified, conglomerate based sampling method. APOE genotyping was carried out on each of the participants. The sampling design was taken into consideration for the frequencies and association analysis. The frequencies of the APOE alleles E2, E3 and E4 were 3.9, 92.0 and 4.1%, respectively. The frequencies of the different APOE genotypes were as follows: 2/2, 0.2%; 2/3, 6.8%; 2/4, 0.6%; 3/3, 85.0%; 3/4, 7.2%, and 4/4, 0.3%. The allelic and genotype frequencies of APOE in an adult population of Medellin did not differ substantially from other series reported in South America. These data are important to determine the real impact of APOE on the population risk of several psychiatric diseases. Copyright © 2013 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.
Mixture-based gatekeeping procedures in adaptive clinical trials.

PubMed

Kordzakhia, George; Dmitrienko, Alex; Ishida, Eiji

2018-01-01

Clinical trials with data-driven decision rules often pursue multiple clinical objectives such as the evaluation of several endpoints or several doses of an experimental treatment. These complex analysis strategies give rise to "multivariate" multiplicity problems with several components or sources of multiplicity. A general framework for defining gatekeeping procedures in clinical trials with adaptive multistage designs is proposed in this paper. The mixture method is applied to build a gatekeeping procedure at each stage and inferences at each decision point (interim or final analysis) are performed using the combination function approach. An advantage of utilizing the mixture method is that it enables powerful gatekeeping procedures applicable to a broad class of settings with complex logical relationships among the hypotheses of interest. Further, the combination function approach supports flexible data-driven decisions such as a decision to increase the sample size or remove a treatment arm. The paper concludes with a clinical trial example that illustrates the methodology by applying it to develop an adaptive two-stage design with a mixture-based gatekeeping procedure.
Ontology-Driven Search and Triage: Design of a Web-Based Visual Interface for MEDLINE.

PubMed

Demelo, Jonathan; Parsons, Paul; Sedig, Kamran

2017-02-02

Diverse users need to search health and medical literature to satisfy open-ended goals such as making evidence-based decisions and updating their knowledge. However, doing so is challenging due to at least two major difficulties: (1) articulating information needs using accurate vocabulary and (2) dealing with large document sets returned from searches. Common search interfaces such as PubMed do not provide adequate support for exploratory search tasks. Our objective was to improve support for exploratory search tasks by combining two strategies in the design of an interactive visual interface by (1) using a formal ontology to help users build domain-specific knowledge and vocabulary and (2) providing multi-stage triaging support to help mitigate the information overload problem. We developed a Web-based tool, Ontology-Driven Visual Search and Triage Interface for MEDLINE (OVERT-MED), to test our design ideas. We implemented a custom searchable index of MEDLINE, which comprises approximately 25 million document citations. We chose a popular biomedical ontology, the Human Phenotype Ontology (HPO), to test our solution to the vocabulary problem. We implemented multistage triaging support in OVERT-MED, with the aid of interactive visualization techniques, to help users deal with large document sets returned from searches. Formative evaluation suggests that the design features in OVERT-MED are helpful in addressing the two major difficulties described above. Using a formal ontology seems to help users articulate their information needs with more accurate vocabulary. In addition, multistage triaging combined with interactive visualizations shows promise in mitigating the information overload problem. Our strategies appear to be valuable in addressing the two major problems in exploratory search. Although we tested OVERT-MED with a particular ontology and document collection, we anticipate that our strategies can be transferred successfully to other contexts. ©Jonathan Demelo, Paul Parsons, Kamran Sedig. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 02.02.2017.

Ontology-Driven Search and Triage: Design of a Web-Based Visual Interface for MEDLINE

PubMed Central

2017-01-01

Background Diverse users need to search health and medical literature to satisfy open-ended goals such as making evidence-based decisions and updating their knowledge. However, doing so is challenging due to at least two major difficulties: (1) articulating information needs using accurate vocabulary and (2) dealing with large document sets returned from searches. Common search interfaces such as PubMed do not provide adequate support for exploratory search tasks. Objective Our objective was to improve support for exploratory search tasks by combining two strategies in the design of an interactive visual interface by (1) using a formal ontology to help users build domain-specific knowledge and vocabulary and (2) providing multi-stage triaging support to help mitigate the information overload problem. Methods We developed a Web-based tool, Ontology-Driven Visual Search and Triage Interface for MEDLINE (OVERT-MED), to test our design ideas. We implemented a custom searchable index of MEDLINE, which comprises approximately 25 million document citations. We chose a popular biomedical ontology, the Human Phenotype Ontology (HPO), to test our solution to the vocabulary problem. We implemented multistage triaging support in OVERT-MED, with the aid of interactive visualization techniques, to help users deal with large document sets returned from searches. Results Formative evaluation suggests that the design features in OVERT-MED are helpful in addressing the two major difficulties described above. Using a formal ontology seems to help users articulate their information needs with more accurate vocabulary. In addition, multistage triaging combined with interactive visualizations shows promise in mitigating the information overload problem. Conclusions Our strategies appear to be valuable in addressing the two major problems in exploratory search. Although we tested OVERT-MED with a particular ontology and document collection, we anticipate that our strategies can be transferred successfully to other contexts. PMID:28153818
Novel product ions of 2-aminoanilide and benzimidazole Ag(I) complexes using electrospray ionization with multi-stage tandem mass spectrometry.

PubMed

Johnson, Byron S; Burinsky, David J; Burova, Svetlana A; Davis, Roman; Fitzgerald, Russ N; Matsuoka, Richard T

2012-05-15

The 2-aminoaniline scaffold is of significant value to the pharmaceutical industry and is embedded in a number of pharmacophores including 2-aminoanilides and benzimidazoles. A novel application of coordination ion spray mass spectrometry (CIS-MS) for interrogating the silver ion (Ag(+)) complexes of a homologous series of these compounds using multi-stage tandem mass spectrometry is described. Unlike the ubiquitous alkali metal ion complexes, Ag(+) complexes of 2-aminoanilides and benzimidazoles were found to yield [M - H](+) ions in significant abundance via gas-phase elimination of the metal hydride (AgH) resulting in unique product ion cascades. Sample introduction was by liquid chromatography with mass spectrometry analysis performed on a hybrid linear ion trap/orbitrap instrument capable of high-resolution measurements. Rigorous structural characterization by multi-stage tandem mass spectrometry using [M + H](+), [M - H](-) and [M - H](+) precursor ions derived from ESI and CIS experiments was performed for the homologous series of 2-aminoanilide and benzimidazole compounds. A full tabular comparison of structural information resulting from these product ion cascades was produced. Multi-stage tandem mass spectrometry of [M - H](+) ions resulting from Ag(+) complexes of 2-aminoanilides and benzimidazoles in CIS-MS experiments produced unique product ion cascades that exhibited complementary structural information to that obtained from tandem mass spectrometry of [M + H](+) and [M - H](-) ions by electrospray ionization (ESI). These observations may be broadly applicable to other compounds that are observed to form Ag(+) complexes and eliminate AgH. Copyright © 2012 John Wiley & Sons, Ltd.
Matching Expectations for Successful University Student Volunteering

ERIC Educational Resources Information Center

Paull, Megan; Omari, Maryam; MacCallum, Judith; Young, Susan; Walker, Gabrielle; Holmes, Kirsten; Haski-Leventha, Debbie; Scott, Rowena

2017-01-01

Purpose: The purpose of this paper is to demonstrate the importance of expectation formation and matching for university student volunteers and their hosts. Design/methodology/approach: This research involved a multi-stage data collection process including interviews with student volunteers, and university and host representatives from six…
Persuading Investors: Emphasizing Communication in a Finance Simulation

ERIC Educational Resources Information Center

Yest, Michael T.; Grant, Kelly A.

2013-01-01

This paper introduces a unique project to faculty seeking an interdisciplinary activity that exposes students to the necessary art of persuasive communication in the field of finance. Specifically, we have designed a multi-stage simulation in which undergraduate business students apply both finance and communication skills, specifically…
RGO/AuNR/HA-5FU nanocomposite with multi-stage release behavior and efficient antitumor activity for synergistic therapy.

PubMed

Yang, Ying; Wang, Yunlong; Zhu, Manzhou; Chen, Yan; Xiao, Yazhong; Shen, Yuhua; Xie, Anjian

2017-05-02

A reduced graphene oxide (RGO)/gold nanorod (AuNR)/hydroxyapatite (HA) nanocomposite was designed and successfully synthesized for the first time. An anticancer drug, 5-fluorouracil (5FU), was chosen as a model drug to be loaded in RGO/AuNR/HA. The fabricated RGO/AuNR/HA-5FU showed robust, selective targeting and penetrating efficiency against HeLa cells due to the good compatibility and nontoxicity of HA, and showed excellent synergetic antitumor effects through combined chemotherapy (CT) by 5FU and photothermal therapy (PTT) by both RGO and AuNRs under near-infrared (NIR) laser irradiation. More importantly, this synergistic dual therapy based on RGO/AuNR/HA can also minimize side effects in normal cells and exhibits greater antitumor activity because of a multi-stage drug release ability triggered by the pH sensitivity of HA in the first stage and the combined photothermal conversion capabilities of RGO and AuNRs by means of the NIR laser irradiation in the second stage. This study suggests that the novel RGO/AuNR/HA multi-stage drug delivery system may represent a promising potential application of multifunctional composite materials in the biomedical field.
Separation Control in a Multistage Compressor Using Impulsive Surface Injection

NASA Technical Reports Server (NTRS)

Wundrow, David W.; Braunscheidel, Edward P.; Culley, Dennis E.; Bright, Michelle M.

2006-01-01

Control of flow separation using impulsive surface injection is investigated within the multistage environment of a low speed axial-flow compressor. Measured wake profiles behind a set of embedded stator vanes treated with suction-surface injection indicate significant reduction in flow separation at a variety of injection-pulse repetition rates and durations. The corresponding total pressure losses across the vanes reveal a bank of repetition rates at each pulse duration where the separation control remains nearly complete. This persistence allows for demands on the injected-mass delivery system to be economized while still achieving effective flow control. The response of the stator-vane boundary layers to infrequently applied short injection pulses is described in terms of the periodic excitation of turbulent strips whose growth and propagation characteristics dictate the lower bound on the band of optimal pulse repetition rates. The eventual falloff in separation control at higher repetition rates is linked to a competition between the benefits of pulse-induced mixing and the aggravation caused by the periodic introduction of low-momentum fluid. Use of these observations for impulsive actuator design is discussed and their impact on modeling the time-average effect of impulsive surface injection for multistage steady-flow simulation is considered.
Pulsed depressed collector

DOEpatents

Kemp, Mark A

2015-11-03

A high power RF device has an electron beam cavity, a modulator, and a circuit for feed-forward energy recovery from a multi-stage depressed collector to the modulator. The electron beam cavity include a cathode, an anode, and the multi-stage depressed collector, and the modulator is configured to provide pulses to the cathode. Voltages of the electrode stages of the multi-stage depressed collector are allowed to float as determined by fixed impedances seen by the electrode stages. The energy recovery circuit includes a storage capacitor that dynamically biases potentials of the electrode stages of the multi-stage depressed collector and provides recovered energy from the electrode stages of the multi-stage depressed collector to the modulator. The circuit may also include a step-down transformer, where the electrode stages of the multi-stage depressed collector are electrically connected to separate taps on the step-down transformer.
Multistage depressed collector with efficiency of 90 to 94 percent for operation of a dual-mode traveling wave tube in the linear region

NASA Technical Reports Server (NTRS)

Ramins, P.; Fox, T. A.

1980-01-01

An axisymmetric, multistage, depressed collector of fixed geometric design was evaluated in conjunction with an octave bandwidth, dual mode traveling wave tube (TWT). The TWT was operated over a wide range of conditions to simulate different applications. The collector performance was optimized (within the constraint of fixed geometric design) over the range of TWT operating conditions covered. For operation of the TWT in the linear, low distortion range, 90 percent and greater collector efficiencies were obtained leading to TWT overall efficiencies of 20 to 35 percent, as compared with 2 to 5 percent with an undepressed collector. With collectors of this efficiency and minimized beam interception losses, it becomes practical to design dual mode TWT's such that the low mode can represent operation well below saturation. Consequently, the required pulse up in beam current can be reduced or eliminated, and this mitigates beam control and dual mode TWT circuit design problems. For operation of the dual mode TWT at saturation, average collector efficiencies in excess of 85 percent were obtained for both the low and high modes across an octave bandwidth, leading to a three to fourfold increase in the TWT overall efficiency.
A multistage framework for dismount spectral verification in the VNIR

NASA Astrophysics Data System (ADS)

Rosario, Dalton

2013-05-01

A multistage algorithm suite is proposed for a specific target detection/verification scenario, where a visible/near infrared hyperspectral (HS) sample is assumed to be available as the only cue from a reference image frame. The target is a suspicious dismount. The suite first applies a biometric based human skin detector to focus the attention of the search. Using as reference all of the bands in the spectral cue, the suite follows with a Bayesian Lasso inference stage designed to isolate pixels representing the specific material type cued by the user and worn by the human target (e.g., hat, jacket). In essence, the search focuses on testing material types near skin pixels. The third stage imposes an additional constraint through RGB color quantization and distance metric checking, limiting even further the search for material types in the scene having visible color similar to the target visible color. Using the proposed cumulative evidence strategy produced some encouraging range-invariant results on real HS imagery, dramatically reducing to zero the false alarm rate on the example dataset. These results were in contrast to the results independently produced by each one of the suite's stages, as the spatial areas of each stage's high false alarm outcome were mutually exclusive in the imagery. These conclusions also apply to results produced by other standard methods, in particular the kernel SVDD (support vector data description) and matched filter, as shown in the paper.
The Great Smoky Mountains Study of Youth. Goals, design, methods, and the prevalence of DSM-III-R disorders.

PubMed

Costello, E J; Angold, A; Burns, B J; Stangl, D K; Tweed, D L; Erkanli, A; Worthman, C M

1996-12-01

The Great Smoky Mountains Study of youth focuses on the relationship between the development of psychiatric disorder and the need for and use of mental health services. A multistage, overlapping cohorts design was used, in which 4500 of the 11758 children aged 9, 11, and 13 years in an 11-county area of the southeastern United States were randomly selected for screening for psychiatric symptoms. Children who scored in the top 25% on the screening questionnaire, together with a 1 in 10 random sample of the rest, were recruited for 4 waves of intensive, annual interviews (n = 1015 at wave 1). In a parallel study, all American Indian children aged 9, 11, and 13 years were recruited (N = 323 at wave 1). The 3-month prevalence (+/-SE) of any DSM-III-R axis I disorder in the main sample, weighted to reflect population prevalence rates, was 20.3% +/- 1.7%. The most common diagnoses were anxiety disorders (5.7% +/- 1.0%), enuresis (5.1% +/- 1.0%), tic disorders (4.2% +/- 0.9%), conduct disorder (3.3% +/- 0.6%), oppositional defiant disorder (2.7% +/- 0.4%), and hyperactivity (1.9% +/- 0.4%). The prevalence of psychiatric disorder in this rural sample was similar to rates reported in other recent studies. Poverty was the strongest demographic correlate of diagnosis, in both urban and rural children.
The Netherlands Mental Health Survey and Incidence Study-2 (NEMESIS-2): design and methods.

PubMed

de Graaf, Ron; Ten Have, Margreet; van Dorsselaer, Saskia

2010-09-01

The psychiatric epidemiological population study NEMESIS-2 (Netherlands Mental Health Survey and Incidence Study-2) replicates and expands the first Netherlands Mental Health Survey and Incidence Study (NEMESIS-1) conducted from 1996 to 1999. The main objectives of the new study are to provide up-to-date figures on the prevalence, incidence, course and consequences of mental disorders, and to study trends in mental disorders and service use, with the use of a new sample. New topics not included in NEMESIS-1 were added, e.g. impulse-control disorders, and genetic correlates of mental disorders through gathering DNA from saliva samples. This paper gives an overview of the design of NEMESIS-2, especially of its recently completed first wave. NEMESIS-2 is a prospective study among Dutch-speaking subjects aged 18-64 years from the general Dutch population. Its baseline wave included 6646 subjects. Three waves are planned with three year-intervals between the waves. A multistage, stratified random sampling procedure was applied. The baseline wave of NEMESIS-2 was performed between November 2007 and July 2009. Face-to-face interviews were administered with the Composite International Diagnostic Interview (CIDI) 3.0. The response rate was 65.1%, and 76.4% of the respondents donated saliva. The sample was reasonably nationally representative, but younger subjects were somewhat underrepresented. In conclusion, we were able to build a comprehensive dataset of good quality, permitting several topics to be studied in the future.
A multi-stage heuristic algorithm for matching problem in the modified miniload automated storage and retrieval system of e-commerce

NASA Astrophysics Data System (ADS)

Wang, Wenrui; Wu, Yaohua; Wu, Yingying

2016-05-01

E-commerce, as an emerging marketing mode, has attracted more and more attention and gradually changed the way of our life. However, the existing layout of distribution centers can't fulfill the storage and picking demands of e-commerce sufficiently. In this paper, a modified miniload automated storage/retrieval system is designed to fit these new characteristics of e-commerce in logistics. Meanwhile, a matching problem, concerning with the improvement of picking efficiency in new system, is studied in this paper. The problem is how to reduce the travelling distance of totes between aisles and picking stations. A multi-stage heuristic algorithm is proposed based on statement and model of this problem. The main idea of this algorithm is, with some heuristic strategies based on similarity coefficients, minimizing the transportations of items which can not arrive in the destination picking stations just through direct conveyors. The experimental results based on the cases generated by computers show that the average reduced rate of indirect transport times can reach 14.36% with the application of multi-stage heuristic algorithm. For the cases from a real e-commerce distribution center, the order processing time can be reduced from 11.20 h to 10.06 h with the help of the modified system and the proposed algorithm. In summary, this research proposed a modified system and a multi-stage heuristic algorithm that can reduce the travelling distance of totes effectively and improve the whole performance of e-commerce distribution center.
Evaluation of the Alaska Native Science & Engineering Program (ANSEP). Research Report

ERIC Educational Resources Information Center

Bernstein, Hamutal; Martin, Carlos; Eyster, Lauren; Anderson, Theresa; Owen, Stephanie; Martin-Caughey, Amanda

2015-01-01

The Urban Institute conducted an implementation and participant-outcomes evaluation of the Alaska Native Science & Engineering Program (ANSEP). ANSEP is a multi-stage initiative designed to prepare and support Alaska Native students from middle school through graduate school to succeed in science, technology, engineering, and math (STEM)…
Study of controlled diffusion stator blading. 1. Aerodynamic and mechanical design report

NASA Technical Reports Server (NTRS)

Canal, E.; Chisholm, B. C.; Lee, D.; Spear, D. A.

1981-01-01

Pratt & Whitney Aircraft is conducting a test program for NASA in order to demonstrate that a controlled-diffusion stator provides low losses at high loadings and Mach numbers. The technology has shown great promise in wind tunnel tests. Details of the design of the controlled diffusion stator vanes and the multiple-circular-arc rotor blades are presented. The stage, including stator and rotor, was designed to be suitable for the first-stage of an advanced multistage, high-pressure compressor.
A high-efficiency 59- to 64-GHz TWT for intersatellite communications

NASA Technical Reports Server (NTRS)

Wilson, Jeffrey D.; Ramins, Peter; Force, Dale A.; Limburg, Helen C.; Tammaru, Ivo

1991-01-01

The design of a 75-W, 59- to 64- GHz TWT with a predicted overall efficiency in excess of 40 percent is described. This intersatellite communications TWT, designated Model 961HA, employs a coupled-cavity slow-wave structure with a two-step velocity taper and an isotropic graphite multistage depressed collector (MDC). Because the RF efficiency of this TWT is less than 8 percent, an MDC design providing a very high collector efficiency was necessary to achieve the overall efficiency goal of 40 percent.
A temperature control design for a tapered element oscillating microbalance sensing surface

NASA Technical Reports Server (NTRS)

1982-01-01

A design study is presented which shows that a tapered element oscillating microbalance can be adapted for temperature control under space application by mating with multistage thermoelectric coolers in such a way that an integral structure evolves. The control of the temperature of the sensing surface can be achieved in a number of ways. An indirect method which uses a measurement of the absorbed power is recommended. The design goals can be met if a relaxation of the power requirement can be considered.
Maladaptive Personality and Neuropsychological Features of Highly Relationally Aggressive Adolescent Girls

ERIC Educational Resources Information Center

Savage, Michael; DiBiase, Anne-Marie

2016-01-01

The maladaptive personality and neuropsychological features of highly relationally aggressive females were examined in a group of 30 grade 6, 7, and 8 girls and group-matched controls. Employing a multistage cluster sampling procedure, a group of highly, yet almost exclusively, relationally aggressive females were identified and matched on a…
The Effect of Computer Games on Students' Critical Thinking Disposition and Educational Achievement

ERIC Educational Resources Information Center

Seifi, Mohammad; Derikvandi, Zahra; Moosavipour, Saeed; Khodabandelou, Rouhollah

2015-01-01

The main aim of this research was to investigate the effect of computer games on student' critical thinking disposition and educational achievement. The research method was descriptive, and its type was casual-comparative. The sample included 270 female high school students in Andimeshk town selected by multistage cluster method. Ricketts…
Impact Evaluation of Further Mathematics Curriculum in Nigeria

ERIC Educational Resources Information Center

Odili, Godwin Alo; Asuru, Vincent A.

2011-01-01

This research was a perceptual survey study carried out to determine whether the goals of Further Mathematics Curriculum (FMC) are being achieved at the Senior Secondary School level. The sample for the study consisted of 240 FM final year students, 45 FM teachers and 180 undergraduates who were selected by a multistage stratified random sampling…
Behavioural Problems of Juvenile Street Hawkers in Uyo Metropolis, Nigeria

ERIC Educational Resources Information Center

Udoh, Nsisong A.; Joseph, Eme U.

2012-01-01

The study sought the opinions of Faculty of Education Students of University of Uyo on the behavioural problems of juvenile street hawkers in Uyo metropolis. Five research hypotheses were formulated to guide the study. This cross-sectional survey employed multi-stage random sampling technique in selecting 200 regular undergraduate students in the…

Posttraumatic Stress Disorder Following Ethnoreligious Conflict in Jos, Nigeria

ERIC Educational Resources Information Center

Obilom, Rose E.; Thacher, Tom D.

2008-01-01

In September 2001, ethnoreligious rioting occurred in Jos, Nigeria. Using a multistage cluster sampling technique, 290 respondents were recruited in Jos 7 to 9 months after the riots. Data were collected regarding demographics, exposure to traumatic events, and psychological symptoms. Resting pulse and blood pressure were recorded. A total of 145…
Assessing Students' Metacognitive Awareness of Learning Strategies among Secondary School Students in Edo State, Nigeria

ERIC Educational Resources Information Center

Okoza, Jolly; Aluede, Oyaziwo; Owens-Sogolo, Osasere

2013-01-01

This study examined metacognitive awareness of learning strategies among Secondary School Students in Edo State, Nigeria. The study was an exploratory one, which utilized descriptive statistics. A total number of 1200 students drawn through multistage proportionate random sampling technique participated in the study. The study found that secondary…
Forced response unsteady aerodynamics in a multistage compressor

NASA Astrophysics Data System (ADS)

Capece, Vincent Ralph

The fundamental flow physics of the unsteady aerodynamics associated with forced vibrations in turbomachinery are investigated. Unique data are obtained through a series of experiments in a three stage axial flow research compressor which quantify the unsteady harmonic gust interaction phenomena over a range of operating and geometric conditions at high values of reduced frequency. In these experiments the effects of the following on the stator vane unsteady aerodynamics were quantified: (1) the steady aerodynamic loading, (2) the detailed waveform of the aerodynamic forcing function, including the chordwise and transverse gust components, (3) multistage blade row interactions, and (4) the solidity, ranging from a design value of 1.09 to an isolated airfoil. In addition, the effect of flow separation on the unsteady aerodynamics of an isolated airfoil was also investigated.
Design considerations for genetic linkage and association studies.

PubMed

Nsengimana, Jérémie; Bishop, D Timothy

2012-01-01

This chapter describes the main issues that genetic epidemiologists usually consider in the design of linkage and association studies. For linkage, we briefly consider the situation of rare, highly penetrant alleles showing a disease pattern consistent with Mendelian inheritance investigated through parametric methods in large pedigrees or with autozygosity mapping in inbred families, and we then turn our focus to the most common design, affected sibling pairs, of more relevance for common, complex diseases. Theoretical and more practical power and sample size calculations are provided as a function of the strength of the genetic effect being investigated. We also discuss the impact of other determinants of statistical power such as disease heterogeneity, pedigree, and genotyping errors, as well as the effect of the type and density of genetic markers. Linkage studies should be as large as possible to have sufficient power in relation to the expected genetic effect size. Segregation analysis, a formal statistical technique to describe the underlying genetic susceptibility, may assist in the estimation of the relevant parameters to apply, for instance. However, segregation analyses estimate the total genetic component rather than a single-locus effect. Locus heterogeneity should be considered when power is estimated and at the analysis stage, i.e. assuming smaller locus effect than the total the genetic component from segregation studies. Disease heterogeneity should be minimised by considering subtypes if they are well defined or by otherwise collecting known sources of heterogeneity and adjusting for them as covariates; the power will depend upon the relationship between the disease subtype and the underlying genotypes. Ultimately, identifying susceptibility alleles of modest effects (e.g. RR≤1.5) requires a number of families that seem unfeasible in a single study. Meta-analysis and data pooling between different research groups can provide a sizeable study, but both approaches require even a higher level of vigilance about locus and disease heterogeneity when data come from different populations. All necessary steps should be taken to minimise pedigree and genotyping errors at the study design stage as they are, for the most part, due to human factors. A two-stage design is more cost-effective than one stage when using short tandem repeats (STRs). However, dense single-nucleotide polymorphism (SNP) arrays offer a more robust alternative, and due to their lower cost per unit, the total cost of studies using SNPs may in the future become comparable to that of studies using STRs in one or two stages. For association studies, we consider the popular case-control design for dichotomous phenotypes, and we provide power and sample size calculations for one-stage and multistage designs. For candidate genes, guidelines are given on the prioritisation of genetic variants, and for genome-wide association studies (GWAS), the issue of choosing an appropriate SNP array is discussed. A warning is issued regarding the danger of designing an underpowered replication study following an initial GWAS. The risk of finding spurious association due to population stratification, cryptic relatedness, and differential bias is underlined. GWAS have a high power to detect common variants of high or moderate effect. For weaker effects (e.g. relative risk<1.2), the power is greatly reduced, particularly for recessive loci. While sample sizes of 10,000 or 20,000 cases are not beyond reach for most common diseases, only meta-analyses and data pooling can allow attaining a study size of this magnitude for many other diseases. It is acknowledged that detecting the effects from rare alleles (i.e. frequency<5%) is not feasible in GWAS, and it is expected that novel methods and technology, such as next-generation resequencing, will fill this gap. At the current stage, the choice of which GWAS SNP array to use does not influence the power in populations of European ancestry. A multistage design reduces the study cost but has less power than the standard one-stage design. If one opts for a multistage design, the power can be improved by jointly analysing the data from different stages for the SNPs they share. The estimates of locus contribution to disease risk from genome-wide scans are often biased, and relying on them might result in an underpowered replication study. Population structure has so far caused less spurious associations than initially feared, thanks to systematic ethnicity matching and application of standard quality control measures. Differential bias could be a more serious threat and must be minimised by strictly controlling all the aspects of DNA acquisition, storage, and processing.
Remote sensing of wetlands

NASA Technical Reports Server (NTRS)

Roller, N. E. G.

1977-01-01

The concept of using remote sensing to inventory wetlands and the related topics of proper inventory design and data collection are discussed. The material presented shows that aerial photography is the form of remote sensing from which the greatest amount of wetlands information can be derived. For extensive, general-purpose wetlands inventories, however, the use of LANDSAT data may be more cost-effective. Airborne multispectral scanners and radar are, in the main, too expensive to use - unless the information that these sensors alone can gather remotely is absolutely required. Multistage sampling employing space and high altitude remote sensing data in the initial stages appears to be an efficient survey strategy for gathering non-point specific wetlands inventory data over large areas. The operational role of remote sensing insupplying inventory data for application to several typical wetlands management problems is illustrated by summary descriptions of past ERIM projects.
Automated pinhole-aperture diagnostic for the current profiling of TWT electron beams

NASA Astrophysics Data System (ADS)

Wei, Yu-Xiang; Huang, Ming-Guang; Liu, Shu-Qing; Liu, Jin-Yue; Hao, Bao-Liang; Du, Chao-Hai; Liu, Pu-Kun

2013-02-01

The measurement system reported here is intended for use in determining the current density distribution of electron beams from Pierce guns for use in TWTs. The system was designed to automatically scan the cross section of the electron beam and collect the high-resolution data with a Faraday cup probe mounted on a multistage manipulator using the LabVIEW program. A 0.06 mm thick molybdenum plate with a pinhole and a Faraday cup mounted as a probe assembly was employed to sample the electron beam current with 0.5 µm space resolution. The thermal analysis of the probe with pulse beam heating was discussed. A 0.45 µP electron gun with the expected minimum beam radius 0.42 mm was measured and the three-dimensional current density distribution, beam envelope and phase space were presented.
Examining national trends in worker health with the National Health Interview Survey.

PubMed

Luckhaupt, Sara E; Sestito, John P

2013-12-01

To describe data from the National Health Interview Survey (NHIS), both the annual core survey and periodic occupational health supplements (OHSs), available for examining national trends in worker health. The NHIS is an annual in-person household survey with a cross-sectional multistage clustered sample design to produce nationally representative health data. The 2010 NHIS included an OHS. Prevalence rates of various health conditions and health behaviors among workers based on multiple years of NHIS core data are available. In addition, the 2010 NHIS-OHS data provide prevalence rates of selected health conditions, work organization factors, and occupational exposures among US workers by industry and occupation. The publicly available NHIS data can be used to identify areas of concern for various industries and for benchmarking data from specific worker groups against national averages.
Design and beam transport simulations of a multistage collector for the Israeli EA-FEM

NASA Astrophysics Data System (ADS)

Tecimer, M.; Canter, M.; Efimov, S.; Gover, A.; Sokolowski, J.

2001-12-01

A four stage asymmetric type depressed collector has been designed for the Israeli mm-wave FEM that is driven by a 1.4 MeV, 1.5 A electron beam. After leaving the interaction section the spent beam has an energy spread of 120 keV and 75 π mm mrad normalized beam emittance. Simulations of the beam transport system from the undulator exit through the decelerator tube into the collector have been carried out using EGUN and GPT codes. The latter has also been employed to study trajectories of the primary and scattered particles within the collector, optimizing the asymmetrical collector geometry and the electrode potentials at the presence of a deflecting magnetic field. The estimated overall system and collector efficiencies reach 50% and 70%, respectively, with a beam recovery of 99.6%. The design is aimed to attain millisecond long pulse operation and subsequently 1 kW average power. Simulation results are implemented in a mechanical design that leads to a simple, cost efficient assembly eliminating ceramic insulator rings between collector stages and the associated brazing in the manufacturing process. Instead, each copper plate is supported by insulating posts and freely displaceable within the vacuum chamber. We report on the simulation results of the beam transport and recovery systems and on the mechanical aspects of the multistage collector design.
[Methodological Aspects of the Sampling Design for the 2015 National Mental Health Survey].

PubMed

Rodríguez, Nelcy; Rodríguez, Viviana Alejandra; Ramírez, Eugenia; Cediel, Sandra; Gil, Fabián; Rondón, Martín Alonso

2016-12-01

The WHO has encouraged the development, implementation and evaluation of policies related to mental health all over the world. In Colombia, within this framework and promoted by the Ministry of Health and Social Protection, as well as being supported by Colciencias, the fourth National Mental Health Survey (NMHST) was conducted using a observational cross sectional study. According to the context and following the guidelines and sampling design, a summary of the methodology used for this sampling process is presented. The fourth NMHST used the Homes Master Sample for Studies in Health from the National System of Studies and Population Surveys for Health to calculate its sample. This Master Sample was developed and implemented in the year 2013 by the Ministry of Social Protection. This study included non-institutionalised civilian population divided into four age groups: children 7-11 years, adolescent 12-17 years, 18-44 years and 44 years old or older. The sample size calculation was based on the reported prevalences in other studies for the outcomes of mental disorders, depression, suicide, associated morbidity, and alcohol use. A probabilistic, cluster, stratified and multistage selection process was used. Expansions factors to the total population were calculated. A total of 15,351 completed surveys were collected and were distributed according to the age groups: 2727, 7-11 years, 1754, 12-17 years, 5889, 18-44 years, and 4981, ≥45 years. All the surveys were distributed in five regions: Atlantic, Oriental, Bogotá, Central and Pacific. A sufficient number of surveys were collected in this study to obtain a more precise approximation of the mental problems and disorders at the regional and national level. Copyright © 2016 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.
Forecasting peak asthma admissions in London: an application of quantile regression models.

PubMed

Soyiri, Ireneous N; Reidpath, Daniel D; Sarran, Christophe

2013-07-01

Asthma is a chronic condition of great public health concern globally. The associated morbidity, mortality and healthcare utilisation place an enormous burden on healthcare infrastructure and services. This study demonstrates a multistage quantile regression approach to predicting excess demand for health care services in the form of asthma daily admissions in London, using retrospective data from the Hospital Episode Statistics, weather and air quality. Trivariate quantile regression models (QRM) of asthma daily admissions were fitted to a 14-day range of lags of environmental factors, accounting for seasonality in a hold-in sample of the data. Representative lags were pooled to form multivariate predictive models, selected through a systematic backward stepwise reduction approach. Models were cross-validated using a hold-out sample of the data, and their respective root mean square error measures, sensitivity, specificity and predictive values compared. Two of the predictive models were able to detect extreme number of daily asthma admissions at sensitivity levels of 76 % and 62 %, as well as specificities of 66 % and 76 %. Their positive predictive values were slightly higher for the hold-out sample (29 % and 28 %) than for the hold-in model development sample (16 % and 18 %). QRMs can be used in multistage to select suitable variables to forecast extreme asthma events. The associations between asthma and environmental factors, including temperature, ozone and carbon monoxide can be exploited in predicting future events using QRMs.
Forecasting peak asthma admissions in London: an application of quantile regression models

NASA Astrophysics Data System (ADS)

Soyiri, Ireneous N.; Reidpath, Daniel D.; Sarran, Christophe

2013-07-01

Asthma is a chronic condition of great public health concern globally. The associated morbidity, mortality and healthcare utilisation place an enormous burden on healthcare infrastructure and services. This study demonstrates a multistage quantile regression approach to predicting excess demand for health care services in the form of asthma daily admissions in London, using retrospective data from the Hospital Episode Statistics, weather and air quality. Trivariate quantile regression models (QRM) of asthma daily admissions were fitted to a 14-day range of lags of environmental factors, accounting for seasonality in a hold-in sample of the data. Representative lags were pooled to form multivariate predictive models, selected through a systematic backward stepwise reduction approach. Models were cross-validated using a hold-out sample of the data, and their respective root mean square error measures, sensitivity, specificity and predictive values compared. Two of the predictive models were able to detect extreme number of daily asthma admissions at sensitivity levels of 76 % and 62 %, as well as specificities of 66 % and 76 %. Their positive predictive values were slightly higher for the hold-out sample (29 % and 28 %) than for the hold-in model development sample (16 % and 18 %). QRMs can be used in multistage to select suitable variables to forecast extreme asthma events. The associations between asthma and environmental factors, including temperature, ozone and carbon monoxide can be exploited in predicting future events using QRMs.
Design, measures and sample characteristics of the CadeViMa-Spain survey on quality of life in community-dwelling older adults.

PubMed

Fernandez-Mayoralas, Gloria; Giraldez-Garcia, Carolina; Forjaz, Maria João; Rojo-Perez, Fermina; Martinez-Martin, Pablo; Prieto-Flores, Maria-Eugenia

2012-03-01

The survey "Quality of life in older adults-Spain" (CadeViMa-Spain) was designed to obtain information about objective and subjective determinants of Quality of Life (QoL) in old age, from a multidimensional perspective. This paper presents the overall description, methodology, sample characteristics and reliability of the measures used. A cross-sectional survey was carried out in a representative sample of 1106 community-dwelling adults aged 60 years and over in Spain. The sample was obtained by a geodemographically-based proportional multistage stratified sampling. A home-based questionnaire included validated scales and questions about sociodemographic characteristics, global QoL, health, family and social networks, financial means and retirement, leisure and social participation, residential environment, and satisfaction with those issues. Face-to-face semi-structured interviews were conducted. Cronbach's α coefficients were used to assess internal consistency of the scales. This nationally representative survey furnishes information about global QoL, health-related QoL, resources availability, living conditions, and satisfaction with the assessed aspects, including life domains most valued by this group. In general, community-dwelling older adults reported positive assessments of health, living conditions, and high levels of satisfaction with the different aspects of QoL. The reliability of the measures in this population was good. This survey provides comprehensive and useful information, based on the view of older people themselves, with potential to contribute to health and social policies towards promoting active aging. The database is available for in-depth comparisons.
Remote sensing of effects of land-use practices on water quality. [environmental surveys using Landsat satellites

NASA Technical Reports Server (NTRS)

Graves, D. H.

1975-01-01

Research efforts are presented for the use of remote sensing in environmental surveys in Kentucky. Ground truth parameters were established that represent the vegetative cover of disturbed and undisturbed watersheds in the Cumberland Plateau of eastern Kentucky. Several water quality parameters were monitored of the watersheds utilized in the establishment of ground truth data. The capabilities of multistage-multispectral aerial photography and satellite imagery were evaluated in detecting various land use practices. The use of photographic signatures of known land use areas utilizing manually-operated spot densitometers was studied. The correlation of imagery signature data to water quality data was examined. Potential water quality predictions were developed from forested and nonforested watersheds based upon the above correlations. The cost effectiveness of predicting water quality values was evaluated using multistage and satellite imagery sampling techniques.
A Correction to the Stress-Strain Curve During Multistage Hot Deformation of 7150 Aluminum Alloy Using Instantaneous Friction Factors

NASA Astrophysics Data System (ADS)

Jiang, Fulin; Tang, Jie; Fu, Dinfa; Huang, Jianping; Zhang, Hui

2018-04-01

Multistage stress-strain curve correction based on an instantaneous friction factor was studied for axisymmetric uniaxial hot compression of 7150 aluminum alloy. Experimental friction factors were calculated based on continuous isothermal axisymmetric uniaxial compression tests at various deformation parameters. Then, an instantaneous friction factor equation was fitted by mathematic analysis. After verification by comparing single-pass flow stress correction with traditional average friction factor correction, the instantaneous friction factor equation was applied to correct multistage stress-strain curves. The corrected results were reasonable and validated by multistage relative softening calculations. This research provides a broad potential for implementing axisymmetric uniaxial compression in multistage physical simulations and friction optimization in finite element analysis.
Study of gas production from shale reservoirs with multi-stage hydraulic fracturing horizontal well considering multiple transport mechanisms.

PubMed

Guo, Chaohua; Wei, Mingzhen; Liu, Hong

2018-01-01

Development of unconventional shale gas reservoirs (SGRs) has been boosted by the advancements in two key technologies: horizontal drilling and multi-stage hydraulic fracturing. A large number of multi-stage fractured horizontal wells (MsFHW) have been drilled to enhance reservoir production performance. Gas flow in SGRs is a multi-mechanism process, including: desorption, diffusion, and non-Darcy flow. The productivity of the SGRs with MsFHW is influenced by both reservoir conditions and hydraulic fracture properties. However, rare simulation work has been conducted for multi-stage hydraulic fractured SGRs. Most of them use well testing methods, which have too many unrealistic simplifications and assumptions. Also, no systematical work has been conducted considering all reasonable transport mechanisms. And there are very few works on sensitivity studies of uncertain parameters using real parameter ranges. Hence, a detailed and systematic study of reservoir simulation with MsFHW is still necessary. In this paper, a dual porosity model was constructed to estimate the effect of parameters on shale gas production with MsFHW. The simulation model was verified with the available field data from the Barnett Shale. The following mechanisms have been considered in this model: viscous flow, slip flow, Knudsen diffusion, and gas desorption. Langmuir isotherm was used to simulate the gas desorption process. Sensitivity analysis on SGRs' production performance with MsFHW has been conducted. Parameters influencing shale gas production were classified into two categories: reservoir parameters including matrix permeability, matrix porosity; and hydraulic fracture parameters including hydraulic fracture spacing, and fracture half-length. Typical ranges of matrix parameters have been reviewed. Sensitivity analysis have been conducted to analyze the effect of the above factors on the production performance of SGRs. Through comparison, it can be found that hydraulic fracture parameters are more sensitive compared with reservoir parameters. And reservoirs parameters mainly affect the later production period. However, the hydraulic fracture parameters have a significant effect on gas production from the early period. The results of this study can be used to improve the efficiency of history matching process. Also, it can contribute to the design and optimization of hydraulic fracture treatment design in unconventional SGRs.
Study of gas production from shale reservoirs with multi-stage hydraulic fracturing horizontal well considering multiple transport mechanisms

PubMed Central

Wei, Mingzhen; Liu, Hong

2018-01-01

Development of unconventional shale gas reservoirs (SGRs) has been boosted by the advancements in two key technologies: horizontal drilling and multi-stage hydraulic fracturing. A large number of multi-stage fractured horizontal wells (MsFHW) have been drilled to enhance reservoir production performance. Gas flow in SGRs is a multi-mechanism process, including: desorption, diffusion, and non-Darcy flow. The productivity of the SGRs with MsFHW is influenced by both reservoir conditions and hydraulic fracture properties. However, rare simulation work has been conducted for multi-stage hydraulic fractured SGRs. Most of them use well testing methods, which have too many unrealistic simplifications and assumptions. Also, no systematical work has been conducted considering all reasonable transport mechanisms. And there are very few works on sensitivity studies of uncertain parameters using real parameter ranges. Hence, a detailed and systematic study of reservoir simulation with MsFHW is still necessary. In this paper, a dual porosity model was constructed to estimate the effect of parameters on shale gas production with MsFHW. The simulation model was verified with the available field data from the Barnett Shale. The following mechanisms have been considered in this model: viscous flow, slip flow, Knudsen diffusion, and gas desorption. Langmuir isotherm was used to simulate the gas desorption process. Sensitivity analysis on SGRs’ production performance with MsFHW has been conducted. Parameters influencing shale gas production were classified into two categories: reservoir parameters including matrix permeability, matrix porosity; and hydraulic fracture parameters including hydraulic fracture spacing, and fracture half-length. Typical ranges of matrix parameters have been reviewed. Sensitivity analysis have been conducted to analyze the effect of the above factors on the production performance of SGRs. Through comparison, it can be found that hydraulic fracture parameters are more sensitive compared with reservoir parameters. And reservoirs parameters mainly affect the later production period. However, the hydraulic fracture parameters have a significant effect on gas production from the early period. The results of this study can be used to improve the efficiency of history matching process. Also, it can contribute to the design and optimization of hydraulic fracture treatment design in unconventional SGRs. PMID:29320489
40 CFR 600.316-78 - Multistage manufacture.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Multistage manufacture. 600.316-78 Section 600.316-78 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY... and Later Model Year Automobiles-Labeling § 600.316-78 Multistage manufacture. Where more than one...
Using public control genotype data to increase power and decrease cost of case-control genetic association studies.

PubMed

Ho, Lindsey A; Lange, Ethan M

2010-12-01

Genome-wide association (GWA) studies are a powerful approach for identifying novel genetic risk factors associated with human disease. A GWA study typically requires the inclusion of thousands of samples to have sufficient statistical power to detect single nucleotide polymorphisms that are associated with only modest increases in risk of disease given the heavy burden of a multiple test correction that is necessary to maintain valid statistical tests. Low statistical power and the high financial cost of performing a GWA study remains prohibitive for many scientific investigators anxious to perform such a study using their own samples. A number of remedies have been suggested to increase statistical power and decrease cost, including the utilization of free publicly available genotype data and multi-stage genotyping designs. Herein, we compare the statistical power and relative costs of alternative association study designs that use cases and screened controls to study designs that are based only on, or additionally include, free public control genotype data. We describe a novel replication-based two-stage study design, which uses free public control genotype data in the first stage and follow-up genotype data on case-matched controls in the second stage that preserves many of the advantages inherent when using only an epidemiologically matched set of controls. Specifically, we show that our proposed two-stage design can substantially increase statistical power and decrease cost of performing a GWA study while controlling the type-I error rate that can be inflated when using public controls due to differences in ancestry and batch genotype effects.
Exposure Control Using Adaptive Multi-Stage Item Bundles.

ERIC Educational Resources Information Center

Luecht, Richard M.

This paper presents a multistage adaptive testing test development paradigm that promises to handle content balancing and other test development needs, psychometric reliability concerns, and item exposure. The bundled multistage adaptive testing (BMAT) framework is a modification of the computer-adaptive sequential testing framework introduced by…
Tracking fluorescent dissolved organic matter in multistage rivers using EEM-PARAFAC analysis: implications of the secondary tributary remediation for watershed management.

PubMed

Nie, Zeyu; Wu, Xiaodong; Huang, Haomin; Fang, Xiaomin; Xu, Chen; Wu, Jianyu; Liang, Xinqiang; Shi, Jiyan

2016-05-01

Profound understanding of behaviors of organic matter from sources to multistage rivers assists watershed management for improving water quality of river networks in rural areas. Ninety-one water samples were collected from the three orders of receiving rivers in a typical combined polluted subcatchment (diffuse agricultural pollutants and domestic sewage) located in China. Then, the fluorescent dissolved organic matter (FDOM) information for these samples was determined by the excitation-emission matrix coupled with parallel factor analysis (EEM-PARAFAC). Consequently, two typical humic-like (C1 and C2) and other two protein-like (C3 and C4) components were separated. Their fluorescence peaks were located at λ ex/em = 255(360)/455, <250(320)/395, 275/335, and <250/305 nm, which resembled the traditional peaks of A + C, A + M, T, and B, respectively. In addition, C1 and C2 accounted for the dominant contributions to FDOM (>60 %). Principal component analysis (PCA) further demonstrated that, except for the autochthonous produced C4, the allochthonous components (C1 and C2) had the same terrestrial origins, but C3 might possess the separate anthropogenic and biological sources. Moreover, the spatial heterogeneity of contamination levels was noticeable in multistage rivers, and the allochthonous FDOM was gradually homogenized along the migration directions. Interestingly, the average content of the first three PARAFAC components in secondary tributaries and source pollutants had significantly higher levels than that in subsequent receiving rivers, thus suggesting that the supervision and remediation for secondary tributaries would play a prominent role in watershed management works.

Deep and Surface Processing of Instructor's Feedback in an Online Course

ERIC Educational Resources Information Center

Huang, Kun; Ge, Xun; Law, Victor

2017-01-01

This study investigated the characteristics of deep and surface approaches to learning in online students' responses to instructor's qualitative feedback given to a multi-stage, ill-structured design project. Further, the study examined the relationships between approaches to learning and two learner characteristics: epistemic beliefs (EB) and…
Turbomachinery Design Using CFD (La Conception des Turbomachines par l’Aerodynamique Numerique).

DTIC Science & Technology

1994-05-01

Method for Flow Calculations in Turbomachines", Vrije Thompkins, W.T.,1981, "A Fortran Program for Calcu- Univ.Brussel, Dienst Stromingsmechanica, VUB- STR ...Model Equation for Simulating Flows in mung um Profile Multistage Turbomachinery MBB-Bericht Nr. UFE 1352, 1977 ASME paper 85-GT-226, Houston, March
Building Alaska's Science and Engineering Pipeline: Evaluation of the Alaska Native Science & Engineering Program

ERIC Educational Resources Information Center

Bernstein, Hamutal; Martin, Carlos; Eyster, Lauren; Anderson, Theresa; Owen, Stephanie; Martin-Caughey, Amanda

2015-01-01

The Urban Institute conducted an implementation and participant-outcomes evaluation of the Alaska Native Science & Engineering Program (ANSEP). ANSEP is a multi-stage initiative designed to prepare and support Alaska Native students from middle school through graduate school to succeed in science, technology, engineering, and math (STEM)…
Ramping up to the Biology Workbench: A Multi-Stage Approach to Bioinformatics Education

ERIC Educational Resources Information Center

Greene, Kathleen; Donovan, Sam

2005-01-01

In the process of designing and field-testing bioinformatics curriculum materials, we have adopted a three-stage, progressive model that emphasizes collaborative scientific inquiry. The elements of the model include: (1) context setting, (2) introduction to concepts, processes, and tools, and (3) development of competent use of technologically…
Family Functioning, Identity Formation, and the Ability of Conflict Resolution among Adolescents

ERIC Educational Resources Information Center

Kiani, Behnaz; Hojatkhah, Seyed Mohsen; Torabi-Nami, Mohammad

2016-01-01

Family is perhaps the most influential system in individuals' life in which various behaviors are learnt. Family functioning refers to the ability of family to meet its responsibilities. The present correlation study used a multi-stage cluster sampling method to recruit 686 subjects including 338 males and 348 females from all high school students…
Young People's Expressed Needs for Comprehensive Sexuality Education in Ecuadorian Schools

ERIC Educational Resources Information Center

Castillo Nuñez, Jessica; Derluyn, Ilse; Valcke, Martin

2018-01-01

This study analyses the expressed sexuality education needs of young people from Azuay, a region of Ecuador characterised by a large proportion of young people whose parents have migrated abroad, a group often considered at risk to developing of sexual health problems. Multi-stage stratified cluster sampling was used to recruit young people aged…
Causal Factors Influencing Adversity Quotient of Twelfth Grade and Third-Year Vocational Students

ERIC Educational Resources Information Center

Pangma, Rachapoom; Tayraukham, Sombat; Nuangchalerm, Prasart

2009-01-01

Problem statement: The aim of this research was to study the causal factors influencing students' adversity between twelfth grade and third-year vocational students in Sisaket province, Thailand. Six hundred and seventy two of twelfth grade and 376 third-year vocational students were selected by multi-stage random sampling techniques. Approach:…
Socioeconomic Situations of the Elderly within the Context of Millennium Development Goals (MDGs) in Nigeria

ERIC Educational Resources Information Center

Wahab, Elias Olukorede

2011-01-01

It is still unknown how the MDGs have impacted the socioeconomic situations of the elderly in Nigeria. This has become essential to appraise the attainability of the MDGs in Nigeria. Quantitative data were collected through an individual-based questionnaire. Multistage sampling was employed to select local government areas, enumeration areas, and…
Teacher Use of Data to Guide Instructional Practice in Elementary Schools

ERIC Educational Resources Information Center

Burrows, Debra C.

2011-01-01

This descriptive study focused on the degree to which data-driven decision making as envisioned by the NCLB legislation was actually occurring in the elementary schools studied. A multi-stage random sample of six Pennsylvania school districts out of 19 located within the service area of Pennsylvania Intermediate Unit #17, one of 29 regional…
A Population-Based Study of Job Stress in Mexican Americans, Non-Hispanic Blacks, and Non-Hispanic Whites

ERIC Educational Resources Information Center

Perez, Norma; Franzini, Luisa; Freeman, Daniel H.; Ju, Hyunsu; Peek, Kristen

2011-01-01

There is little known about the association between socioeconomic status and job stress in Mexican Americans. To address this issue, data were originated on a community level using personal interviews from working Mexican Americans using a multistage probability sample. In this study we described the population's sociodemographic characteristics,…
Multistage remote sensing: toward an annual national inventory

Treesearch

Raymond L. Czaplewski

1999-01-01

Remote sensing can improve efficiency of statistical information. Landsat data can identify and map a few broad categories of forest cover and land use. However, more-detailed information requires a sample of higher-resolution imagery, which costs less than field data but considerably more than Landsat data. A national remote sensing program would be a major...
A Chondrule from the Mokoia (CV3) Chondrite with Anomalously Low 26Mg*: Evidence for a Multi-Stage History-

NASA Astrophysics Data System (ADS)

Claydon, J. L.; Elliott, T.; Coath, C. D.; Chen, H. W.; Taylor, C. A.; Russell, S. S.

2015-07-01

MC-ICP-MS measurements of Mg isotopes in chondrule MOK13B reveal that it may have formed from low-Al/Mg material that underwent chemical fractionation to increase Al/Mg after decay of 26-Al, or it may sample a region with anomalous Al or Mg isotopes.
Students' Commitment, Engagement and Locus of Control as Predictor of Academic Achievement at Higher Education Level

ERIC Educational Resources Information Center

Sarwar, Muhammad; Ashrafi, Ghulam Muhammad

2014-01-01

The purpose of this study was to analyze Students' Commitment, Engagement and Locus of Control as predictors of Academic Achievement at Higher Education Level. We used analytical model and conclusive research approach to conduct study and survey method for data collection. We selected 369 students using multistage sampling technique from three…
How to Classify the Diversity of Seventh Grade Students' Mathematical Process Skills: An Application of Latent Profile Analysis

ERIC Educational Resources Information Center

Kaosa-ard, Chanapat; Erawan, Waraporn; Damrongpanit, Suntonrapot; Suksawang, Poonpong

2015-01-01

The researcher applied latent profile analysis to study the difference of the students' mathematical process skill. These skills are problem solving skills, reasoning skills, communication and presentation skills, connection knowledge skills, and creativity skills. Samples were 2,485 seventh-grade students obtained from Multi-stage Random…
Do Human-Figure Drawings of Children and Adolescents Mirror Their Cognitive Style and Self-Esteem?

ERIC Educational Resources Information Center

Dey, Anindita; Ghosh, Paromita

2016-01-01

The investigation probed relationships among human-figure drawing, field-dependent-independent cognitive style and self-esteem of 10-15 year olds. It also attempted to predict human-figure drawing scores of participants based on their field-dependence-independence and self-esteem. Area, stratified and multi-stage random sampling were used to…
Age of Alcohol-Dependence Onset: Associations with Severity of Dependence and Seeking Treatment

ERIC Educational Resources Information Center

Hingson, Ralph W.; Heeren, Timothy; Winter, Michael R.

2007-01-01

Objective: We explored whether people who become alcohol dependent at younger ages are more likely to seek alcohol-related help or treatment or experience chronic relapsing dependence. Methods: In 2001-2002 the National Institute on Alcohol Abuse and Alcoholism completed a face-to-face interview survey with a multistage probability sample of 43…
What Puts Women at Risk of Violence from Their Husbands? Findings from a Large, Nationally Representative Survey in Turkey

ERIC Educational Resources Information Center

Yuksel-Kaptanoglu, Ilknur; Turkyilmaz, Ahmet Sinan; Heise, Lori

2012-01-01

A large, nationally representative, cross-sectional survey was conducted in Turkey in 2008. In this survey, which used the WHO (World Health Organization) study module on violence, information about lifetime and current violence (past 12 months) was obtained using weighted, stratified, and multistage cluster sampling. This article describes…
Transformer-Feedback Interstage Bandwidth Enhancement for MMIC Multistage Amplifiers

NASA Astrophysics Data System (ADS)

Nikandish, Gholamreza; Medi, Ali

2015-02-01

The transformer-feedback (TRFB) interstage bandwidth enhancement technique for broadband multistage amplifiers is presented. Theory of the TRFB bandwidth enhancement and the design conditions for maximum bandwidth, maximally flat gain, and maximally flat group delay are provided. It is shown that the TRFB bandwidth enhancement can provide higher bandwidth compared to the conventional techniques based on reactive impedance matching networks. A three-stage low-noise amplifier (LNA) monolithic microwave integrated circuit with the TRFB between its consecutive stages is designed and implemented in a 0.1- μm GaAs pHEMT process. The TRFB is realized by coupling between the drain bias lines of transistors. The reuse of bias lines leads to bandwidth enhancement without increasing the chip area and power consumption. The LNA features average gain of 23 dB and 3-dB bandwidth of 11-39 GHz. It provides a noise figure of 2.1-3.0 dB and an output 1-dB compression point of 8.6 dBm, while consuming 40 mA of current from a 2-V supply.
On decoding of multi-level MPSK modulation codes

NASA Technical Reports Server (NTRS)

Lin, Shu; Gupta, Alok Kumar

1990-01-01

The decoding problem of multi-level block modulation codes is investigated. The hardware design of soft-decision Viterbi decoder for some short length 8-PSK block modulation codes is presented. An effective way to reduce the hardware complexity of the decoder by reducing the branch metric and path metric, using a non-uniform floating-point to integer mapping scheme, is proposed and discussed. The simulation results of the design are presented. The multi-stage decoding (MSD) of multi-level modulation codes is also investigated. The cases of soft-decision and hard-decision MSD are considered and their performance are evaluated for several codes of different lengths and different minimum squared Euclidean distances. It is shown that the soft-decision MSD reduces the decoding complexity drastically and it is suboptimum. The hard-decision MSD further simplifies the decoding while still maintaining a reasonable coding gain over the uncoded system, if the component codes are chosen properly. Finally, some basic 3-level 8-PSK modulation codes using BCH codes as component codes are constructed and their coding gains are found for hard decision multistage decoding.
Efficiency enhancement of dual-mode traveling wave tubes at saturation and in the linear range by use of spent-beam refocusing and multistage depressed collectors

NASA Technical Reports Server (NTRS)

Ramins, P.; Fox, T. A.

1979-01-01

An axisymmetric, multistage depressed collector of fixed geometric design was evaluated in conjunction with an octave-bandwidth, dual-mode TWT. The TWT was operated over a wide range of conditions to simulate different applications. The collector was operated in three-, four-, and five-stage configurations, and its performance was optimized (within the constraint of fixed geometric design) over the range of TWT operating conditions covered. For operation of the dual-mode TWT at and near saturation, the collectors increased the TWT overall efficiency by a factor of 2 1/2 to 3 1/2. Collector performance was relatively constant for both the high and low TWT modes and for operation of the TWT across an octave bandwidth. For operation of the TWT in the linear, low-distortion range, collector efficiencies of 90 percent and greater were obtained, leading to a five- to twelvefold increase in the TWT overall efficiency for the range of operating conditions covered and reasonably high (greater than 25 percent) overall efficiencies well below saturation.

Performance of computer-designed small-size multistage depressed collectors for a high-perveance traveling wave tube

NASA Technical Reports Server (NTRS)

Ramins, P.

1984-01-01

Computer designed axisymmetric 2.4-cm-diameter three-, four-, and five-stage depressed collectors were evaluated in conjunction with an octave bandwidth, high-perveance, and high-electronic-efficiency, griddled-gun traveling wave tube (TWT). Spent-beam refocusing was used to condition the beam for optimum entry into the depressed collectors. Both the TWT and multistage depressed collector (MDC) efficiencies were measured, as well as the MDC current, dissipated thermal power, and DC input power distributions, for the TWT operating both at saturation over its bandwidth and over its full dynamic range. Relatively high collector efficiencies were obtained, leading to a very substantial improvement in the overall TWT efficiency. In spite of large fixed TWT body losses (due largely to the 6 to 8 percent beam interception), average overall efficiencies of 45 to 47 percent (for three to five collector stages) were obtained at saturation across the 2.5-, to 5.5-GHz operating band. For operation below saturation the collector efficiencies improved steadily, leading to reasonable ( 20 percent) overall efficiencies as far as 6 dB below saturation.
Application of the theory of reasoned action to promoting breakfast consumption.

PubMed

Hosseini, Zahra; Gharlipour Gharghani, Zabihollah; Mansoori, Anahita; Aghamolaei, Teamur; Mohammadi Nasrabadi, Maryam

2015-01-01

Breakfast is the most important daily meal, but neglected more than other meals by children and adolescents. The aim of this study was to evaluate the effectiveness of an educational intervention, based on the Theory of Reasoned Action (TRA) to increase breakfast consumption among school children in Bandar Abbas, Iran. In this quasi experimental study which was conducted in 2012, 88 students of four secondary schools in Bandar Abbas, south of Iran, were enrolled. Multi-stage cluster sampling was performed with random allocation of interventional and control groups. The study tool was a questionnaire which was filled by the students before and two months after the educational intervention. For data analysis, statistical tests including paired-samples t-test, independent samples t-test, Wilcoxon test, and Mann-Whitney test were used through SPSS v.18 software. The result of the study showed that application of TRA significantly increased scores of behavior of breakfast consumption (p<0.01). After the intervention, a significant increase was revealed in all nutrition intakes, except for fat and sugar (p<0.01). The findings support application of the TRA in improving the intention and behavior of breakfast consumption. Applying this theory for designing interventions to increase breakfast eating is recommended.
Yellow fever risk assessment in the Central African Republic

PubMed Central

Staples, J. Erin; Diallo, Mawlouth; Janusz, Kristen B.; Manengu, Casimir; Lewis, Rosamund F.; Perea, William; Yactayo, Sergio; Sall, Amadou A.

2015-01-01

Background Starting in 2008, the Central African Republic (CAR) experienced an unprecedented number of reported yellow fever (YF) cases. A risk assessment of YF virus (YFV) activity was conducted to estimate potential disease risk and vaccine needs. Methods A multistage cluster sampling design was used to sample humans, non-human primates, and mosquitoes in distinct ecologic zones. Humans and non-human primates were tested for YFV-specific antibodies; mosquitoes were tested for YFV RNA. Results Overall, 13.3% (125/938) of humans were found to have naturally-acquired YFV antibodies. Antibody levels were higher in zones in the southern and south central regions of CAR. All sampled non-human primates (n=56) were known YFV reservoirs; one tested positive for YFV antibodies. Several known YF vectors were identified including Aedes africanus, Ae. aegypti, Ae. luteocephalus, and Ae. simpsoni. Several more urban locations were found to have elevated Breateau and Container indices for Ae. aegypti. Conclusions A country-wide assessment of YF risk found YFV to be endemic in CAR. The potential for future YF cases and outbreaks, however, varied by ecologic zone. Improved vaccination coverage through mass campaign and childhood immunization was recommended to mitigate the YF risk. PMID:24947520
Off-Design Performance of a Multi-Stage Supersonic Turbine

NASA Technical Reports Server (NTRS)

Dorney, Daniel J.; Griffin, Lisa W.; Huber, Frank; Sondak, Douglas L.

2003-01-01

The drive towards high-work turbines has led to designs which can be compact, transonic, supersonic, counter rotating, or use a dense drive gas. These aggressive designs can lead to strong unsteady secondary flows and flow separation. The amplitude and extent of these unsteady flow phenomena can be amplified at off-design operating conditions. Pre-test off-design predictions have been performed for a new two-stage supersonic turbine design that is currently being tested in air. The simulations were performed using a three-dimensional unsteady Navier-Stokes analysis, and the predicted results have been compared with solutions from a validated meanline analysis.
Applying a punch with microridges in multistage deep drawing processes.

PubMed

Lin, Bor-Tsuen; Yang, Cheng-Yu

2016-01-01

The developers of high aspect ratio components aim to minimize the processing stages in deep drawing processes. This study elucidates the application of microridge punches in multistage deep drawing processes. A microridge punch improves drawing performance, thereby reducing the number of stages required in deep forming processes. As an example, the original eight-stage deep forming process for a copper cylindrical cup with a high aspect ratio was analyzed by finite element simulation. Microridge punch designs were introduced in Stages 4 and 7 to replace the original punches. In addition, Stages 3 and 6 were eliminated. Finally, these changes were verified through experiments. The results showed that the microridge punches reduced the number of deep drawing stages yielding similar thickness difference percentages. Further, the numerical and experimental results demonstrated good consistency in the thickness distribution.
A shirt containing multistage phase change material and active cooling components was associated with increased exercise capacity in a hot, humid environment.

PubMed

McFarlin, Brian K; Henning, Andrea L; Venable, Adam S; Williams, Randall R; Best Sampson, Jill N

2016-08-01

Recent advances in clothing design include the incorporation of phase change materials (PCM) and other active cooling components (ACC) to provide better body heat dissipation. The purpose of this study was to determine the effect of wearing a shirt containing multistage PCM/ACC on exercise capacity at low (5.0), moderate-high (7.5) and extreme (9.0) levels of the physiological strain index (PSI). Fourteen individuals tested two shirts (control vs. cooling) during 45-min of interval running in a hot, humid (35 ± 1 °C; 55 ± 6% RH) environment. The cooling shirt resulted in an 8% improvement in exercise capacity at a PSI of 7.5 (p < 0.05). The observed increase in exercise capacity would likely translate to a significant improvement in exercise performance. More research is needed to determine a best practice approach for the use of cooling clothing as a counter to exercise-induced heat exposure. Practitioner Summary: In this report, we demonstrate that when forced to exercise in a hot, humid environment, an individual's exercise capacity may increase by as much as 8% when wearing a shirt composed of multistage phase change material and active cooling components.
Purification of High Salinity Brine by Multi-Stage Ion Concentration Polarization Desalination

PubMed Central

Kim, Bumjoo; Kwak, Rhokyun; Kwon, Hyukjin J.; Pham, Van Sang; Kim, Minseok; Al-Anzi, Bader; Lim, Geunbae; Han, Jongyoon

2016-01-01

There is an increasing need for the desalination of high concentration brine (>TDS 35,000 ppm) efficiently and economically, either for the treatment of produced water from shale gas/oil development, or minimizing the environmental impact of brine from existing desalination plants. Yet, reverse osmosis (RO), which is the most widely used for desalination currently, is not practical for brine desalination. This paper demonstrates technical and economic feasibility of ICP (Ion Concentration Polarization) electrical desalination for the high saline water treatment, by adopting multi-stage operation with better energy efficiency. Optimized multi-staging configurations, dependent on the brine salinity values, can be designed based on experimental and numerical analysis. Such an optimization aims at achieving not just the energy efficiency but also (membrane) area efficiency, lowering the true cost of brine treatment. ICP electrical desalination is shown here to treat brine salinity up to 100,000 ppm of Total Dissolved Solids (TDS) with flexible salt rejection rate up to 70% which is promising in a various application treating brine waste. We also demonstrate that ICP desalination has advantage of removing both salts and diverse suspended solids simultaneously, and less susceptibility to membrane fouling/scaling, which is a significant challenge in the membrane processes. PMID:27545955
The multilayer nanoparticles for deep penetration of docetaxel into tumor parenchyma to overcome tumor microenvironment.

PubMed

Khaliq, Nisar Ul; Park, Dal Yong; Lee, Jae Young; Joo, Yeonhee; Oh, Keun Sang; Kim, Jung Seok; Kim, Jin-Seok; Kim, In-San; Kwon, Ick Chan; Yuk, Soon Hong

2016-10-01

Deep penetration of the anticancer drug, docetaxel (DTX), into tumor parenchyma was demonstrated to achieve improved chemotherapy. For this purpose, a multistage nanostructure was designed and characterized using the multilayer nanoparticles (NPs). The multilayer NPs had a core/shell structure. The core was composed of the DTX-loaded Pluronic NPs (diameter: 12nm) that were transferred into the inner side of vesicles to form the vesicle NPs. Förster resonance energy transfer (FRET) in the NPs was observed to verify the incorporation of the DTX-loaded Pluronic NPs into the inner side of the vesicles during the formation of the vesicle NPs. Subsequently, the vesicle NPs were stabilized through Pluronic-lipid bilayer interaction to form the multilayer NPs. To examine the morphology and size distribution of the multilayer NPs, transmittance electron microscopy and dynamic light scattering were used. In vitro release behavior and toxicity were observed to verify the functionality of the multilayer NPs as nanocarriers for cancer therapy. Multistage functionality was evaluated by cellular uptake and tissue distribution behaviors of the multilayer NPs. The biodistribution of the multilayer NPs and their antitumor efficacy were also observed to understand the role of multistage functionality for improved chemotherapy. Copyright © 2016 Elsevier B.V. All rights reserved.
Pollutant removal in a multi-stage municipal wastewater treatment system comprised of constructed wetlands and a maturation pond, in a temperate climate.

PubMed

Rivas, A; Barceló-Quintal, I; Moeller, G E

2011-01-01

A multi-stage municipal wastewater treatment system is proposed to comply with Mexican standards for discharge into receiving water bodies. The system is located in Santa Fe de la Laguna, Mexico, an area with a temperate climate. It was designed for 2,700 people equivalent (259.2 m3/d) and consists of a preliminary treatment, a septic tank as well as two modules operating in parallel, each consisting of a horizontal subsurface-flow wetland, a maturation pond and a vertical flow polishing wetland. After two years of operation, on-site research was performed. An efficient biochemical oxygen demand (BOD5) (94-98%), chemical oxygen demand (91-93%), total suspended solids (93-97%), total Kjeldahl nitrogen (56-88%) and fecal coliform (4-5 logs) removal was obtained. Significant phosphorus removal was not accomplished in this study (25-52%). Evapotranspiration was measured in different treatment units. This study demonstrates that during the dry season wastewater treatment by this multi-stage system cannot comply with the limits established by Mexican standards for receiving water bodies type 'C'. However, it has demonstrated the system's potential for less restrictive uses such as agricultural irrigation, recreation and provides the opportunity for wastewater treatment in rural areas without electric energy.
Purification of High Salinity Brine by Multi-Stage Ion Concentration Polarization Desalination

NASA Astrophysics Data System (ADS)

Kim, Bumjoo; Kwak, Rhokyun; Kwon, Hyukjin J.; Pham, Van Sang; Kim, Minseok; Al-Anzi, Bader; Lim, Geunbae; Han, Jongyoon

2016-08-01

There is an increasing need for the desalination of high concentration brine (>TDS 35,000 ppm) efficiently and economically, either for the treatment of produced water from shale gas/oil development, or minimizing the environmental impact of brine from existing desalination plants. Yet, reverse osmosis (RO), which is the most widely used for desalination currently, is not practical for brine desalination. This paper demonstrates technical and economic feasibility of ICP (Ion Concentration Polarization) electrical desalination for the high saline water treatment, by adopting multi-stage operation with better energy efficiency. Optimized multi-staging configurations, dependent on the brine salinity values, can be designed based on experimental and numerical analysis. Such an optimization aims at achieving not just the energy efficiency but also (membrane) area efficiency, lowering the true cost of brine treatment. ICP electrical desalination is shown here to treat brine salinity up to 100,000 ppm of Total Dissolved Solids (TDS) with flexible salt rejection rate up to 70% which is promising in a various application treating brine waste. We also demonstrate that ICP desalination has advantage of removing both salts and diverse suspended solids simultaneously, and less susceptibility to membrane fouling/scaling, which is a significant challenge in the membrane processes.
Multistage Planetary Power Transmissions

NASA Technical Reports Server (NTRS)

Hadden, G. B.; Dyba, G. J.; Ragen, M. A.; Kleckner, R. J.; Sheynin, L.

1986-01-01

PLANETSYS simulates thermomechanical performance of multistage planetary performance of multistage planetary power transmission. Two versions of code developed, SKF version and NASA version. Major function of program: compute performance characteristics of planet bearing for any of six kinematic inversions. PLANETSYS solves heat-balance equations for either steadystate or transient thermal conditions, and produces temperature maps for mechanical system.
Modeling of Unsteady Three-dimensional Flows in Multistage Machines

NASA Technical Reports Server (NTRS)

Hall, Kenneth C.; Pratt, Edmund T., Jr.; Kurkov, Anatole (Technical Monitor)

2003-01-01

Despite many years of development, the accurate and reliable prediction of unsteady aerodynamic forces acting on turbomachinery blades remains less than satisfactory, especially when viewed next to the great success investigators have had in predicting steady flows. Hall and Silkowski (1997) have proposed that one of the main reasons for the discrepancy between theory and experiment and/or industrial experience is that many of the current unsteady aerodynamic theories model a single blade row in an infinitely long duct, ignoring potentially important multistage effects. However, unsteady flows are made up of acoustic, vortical, and entropic waves. These waves provide a mechanism for the rotors and stators of multistage machines to communicate with one another. In other words, wave behavior makes unsteady flows fundamentally a multistage (and three-dimensional) phenomenon. In this research program, we have has as goals (1) the development of computationally efficient computer models of the unsteady aerodynamic response of blade rows embedded in a multistage machine (these models will ultimately be capable of analyzing three-dimensional viscous transonic flows), and (2) the use of these computer codes to study a number of important multistage phenomena.
Large-scale multi-stage constructed wetlands for secondary effluents treatment in northern China: Carbon dynamics.

PubMed

Wu, Haiming; Fan, Jinlin; Zhang, Jian; Ngo, Huu Hao; Guo, Wenshan

2018-02-01

Multi-stage constructed wetlands (CWs) have been proved to be a cost-effective alternative in the treatment of various wastewaters for improving the treatment performance as compared with the conventional single-stage CWs. However, few long-term full-scale multi-stage CWs have been performed and evaluated for polishing effluents from domestic wastewater treatment plants (WWTP). This study investigated the seasonal and spatial dynamics of carbon and the effects of the key factors (input loading and temperature) in the large-scale seven-stage Wu River CW polishing domestic WWTP effluents in northern China. The results indicated a significant improvement in water quality. Significant seasonal and spatial variations of organics removal were observed in the Wu River CW with a higher COD removal efficiency of 64-66% in summer and fall. Obvious seasonal and spatial variations of CH 4 and CO 2 emissions were also found with the average CH 4 and CO 2 emission rates of 3.78-35.54 mg m -2 d -1 and 610.78-8992.71 mg m -2 d -1 , respectively, while the higher CH 4 and CO 2 emission flux was obtained in spring and summer. Seasonal air temperatures and inflow COD loading rates significantly affected organics removal and CH 4 emission, but they appeared to have a weak influence on CO 2 emission. Overall, this study suggested that large-scale Wu River CW might be a potential source of GHG, but considering the sustainability of the multi-stage CW, the inflow COD loading rate of 1.8-2.0 g m -2 d -1 and temperature of 15-20 °C may be the suitable condition for achieving the higher organics removal efficiency and lower greenhouse gases (GHG) emission in polishing the domestic WWTP effluent. The obtained knowledge of the carbon dynamics in large-scale Wu River CW will be helpful for understanding the carbon cycles, but also can provide useful field experience for the design, operation and management of multi-stage CW treatments. Copyright © 2017 Elsevier Ltd. All rights reserved.
Relationship between occupational stress and job burnout among rural-to-urban migrant workers in Dongguan, China: a cross-sectional study

PubMed Central

Luo, Hao; Yang, Hui; Xu, Xiujuan; Yun, Lin; Chen, Ruoling; Chen, Yuting; Xu, Longmei; Liu, Jiaxian; Liu, Linhua; Liang, Hairong; Zhuang, Yali; Hong, Liecheng; Chen, Ling; Yang, Jinping; Tang, Huanwen

2016-01-01

Objectives In China, there have been an increasing number of migrant workers from rural to urban areas, and migrant workers have the highest incidence of occupational diseases. However, few studies have examined the impact of occupational stress on job burnout in these migrant workers. This study aimed to investigate the relationship between occupational stress and job burnout among migrant workers. Design This study used a cross-sectional survey. Setting This investigation was conducted in Dongguan city, Guangdong Province, China. Participants 3806 migrant workers, aged 18–60 years, were randomly selected using multistage sampling procedures. Primary and secondary outcome measures Multistage sampling procedures were used to examine demographic characteristics, behaviour customs and job-related data. Hierarchical linear regression and logistic regression models were constructed to explore the relationship between occupational stress and burnout. Results Demographics, behaviour customs and job-related characteristics significantly affected on burnout. After adjusting for the control variable, a high level of emotional exhaustion was associated with high role overload, high role insufficiency, high role boundary, high physical environment, high psychological strain, high physical strain, low role ambiguity, low responsibility and low vocational strain. A high level of depersonalisation was associated with high role overload, high role ambiguity, high role boundary, high interpersonal strain, high recreation, low physical environment and low social support. A low level of personal accomplishment was associated with high role boundary, high role insufficiency, low responsibility, low social support, low physical environment, low self-care and low interpersonal strain. Compared to the personal resources, the job strain and personal strain were more likely to explain the burnout of rural-to-urban migrant workers in our study. Conclusions The migrant workers have increased job burnouts in relation to occupational stress. Relieving occupational stress and maintaining an appropriate quantity and quality of work could be important measures for preventing job burnout among these workers. PMID:27534989
Epidemiology of major depression in four cities in Mexico.

PubMed

Slone, Laurie B; Norris, Fran H; Murphy, Arthur D; Baker, Charlene K; Perilla, Julia L; Diaz, Dayna; Rodriguez, Francisco Gutiérrez; Gutiérrez Rodriguez, José de Jesús

2006-01-01

Analyses were conducted to estimate lifetime and current prevalence of major depressive disorder (MDD) for four representative cities of Mexico, to identify variables that influence the probability of MDD, and to further describe depression in Mexican culture. A multistage probability sampling design was used to draw a sample of 2,509 adults in four different regions of Mexico. MDD was assessed according to DSM-IV criteria by using the Composite International Diagnostic Interview collected by trained lay interviewers. The prevalence of MDD in these four cities averaged 12.8% for lifetime and 6.1% for the previous 12 months. MDD was highly comorbid with other mental disorders. Women were more likely to have lifetime MDD than were men. Being divorced, separated, or widowed (compared to married or never married) and having experienced childhood trauma were related to higher lifetime prevalence but not to current prevalence. In addition, age and education level were related to current 12-month MDD. Data on the profile of MDD in urban Mexico are provided. This research expands our understanding of MDD across cultures.
Physical education and academic achievement in elementary school: data from the early childhood longitudinal study.

PubMed

Carlson, Susan A; Fulton, Janet E; Lee, Sarah M; Maynard, L Michele; Brown, David R; Kohl, Harold W; Dietz, William H

2008-04-01

We examined the association between time spent in physical education and academic achievement in a longitudinal study of students in kindergarten through fifth grade. We used data from the Early Childhood Longitudinal Study, Kindergarten Class of 1998 to 1999, which employed a multistage probability design to select a nationally representative sample of students in kindergarten (analytic sample = 5316). Time spent in physical education (minutes per week) was collected from classroom teachers, and academic achievement (mathematics and reading) was scored on an item response theory scale. A small but significant benefit for academic achievement in mathematics and reading was observed for girls enrolled in higher amounts (70-300 minutes per week) of physical education (referent: 0-35 minutes per week). Higher amounts of physical education were not positively or negatively associated with academic achievement among boys. Among girls, higher amounts of physical education may be associated with an academic benefit. Physical education did not appear to negatively affect academic achievement in elementary school students. Concerns about adverse effects on achievement may not be legitimate reasons to limit physical education programs.
Regional agriculture surveys using ERTS-1 data

NASA Technical Reports Server (NTRS)

Draeger, W. C.; Nichols, J. D.; Benson, A. S.; Larrabee, D. G.; Jenkus, W. M.; Hay, C. M.

1974-01-01

The Center for Remote Sensing Research has conducted studies designed to evaluate the potential application of ERTS data in performing agricultural inventories, and to develop efficient methods of data handling and analysis useful in the operational context for performing large area surveys. This work has resulted in the development of an integrated system utilizing both human and computer analysis of ground, aerial, and space imagery, which has been shown to be very efficient for regional crop acreage inventories. The technique involves: (1) the delineation of ERTS images into relatively homogeneous strata by human interpreters, (2) the point-by-point classification of the area within each strata on the basis of crop type using a human/machine interactive digital image processing system; and (3) a multistage sampling procedure for the collection of supporting aerial and ground data used in the adjustment and verification of the classification results.
Social networks and health-related quality of life: a population based study among older adults.

PubMed

Gallegos-Carrillo, Katia; Mudgal, Jyoti; Sánchez-García, Sergio; Wagner, Fernando A; Gallo, Joseph J; Salmerón, Jorge; García-Peña, Carmen

2009-01-01

To examine the relationship between components of social networks and health-related quality of life (HRQL) in older adults with and without depressive symptoms. Comparative cross-sectional study with data from the cohort study 'Integral Study of Depression', carried out in Mexico City during 2004. The sample was selected through a multi-stage probability design. HRQL was measured with the SF-36. Geriatric Depression Scale (GDS) and the Short Anxiety Screening Test (SAST) determined depressive symptoms and anxiety. T-test and multiple linear regressions were conducted. Older adults with depressive symptoms had the lowest scores in all HRQL scales. A larger network of close relatives and friends was associated with better HRQL on several scales. Living alone did not significantly affect HRQL level, in either the study or comparison group. A positive association between some components of social networks and good HRQL exists even in older adults with depressive symptoms.
The Priorities of Iranian Male Adolescents Health Needs.

PubMed

Zare, Elham; Simbar, Masoumeh; Shahhosseini, Zohreh; Alavi Majd, Hamid

2017-07-01

Health in the adolescence period guarantees the next generation's health. The assessment of health needs is the first stage for the implementation of health promotion interventions. This study aimed to assess the priorities of male adolescent's health needs in Tehran, Iran, in year 2015. This cross-sectional correlational study was conducted with 1,200 male adolescents aged between 13 and 18 years. Single male adolescents studying in public guidance and high schools in Tehran, Iran, in year 2015 were chosen using a random multistage sampling method. Data were collected using the male adolescent health need assessment scale. The data were analyzed using descriptive and inferential statistics. It was found that while the lowest score was for the domain of sexual health, other domains had average or higher than average scores. More attention should be paid to the sexual health needs of male adolescents. Policy makers need to design strategies that help meet the health needs of male adolescents.
The effect of asthma education program on knowledge of school teachers: a randomized controlled trial.

PubMed

Kawafha, Mariam M; Tawalbeh, Loai Issa

2015-04-01

The purpose of this study was to examine the effect of an asthma education program on schoolteachers' knowledge. Pre-test-post-test experimental randomized controlled design was used. A multistage-cluster sampling technique was used to randomly select governorate, primary schools, and schoolteachers. Schoolteachers were randomly assigned either to the experimental group (n = 36) and attended three educational sessions or to the control group (n = 38) who did not receive any intervention. Knowledge about asthma was measured using the Asthma General Knowledge Questionnaire for Adults (AGKQA). The results indicated that teachers in the experimental group showed significantly (p < .001) higher knowledge of asthma in the first post-test and the second post-test compared with those in the control group. Implementing asthma education enhanced schoolteachers' knowledge of asthma. The asthma education program should target schoolteachers to improve knowledge about asthma. © The Author(s) 2014.

The Role of Hopelessness in the Health of Low-Class Rural Chinese Residents.

PubMed

Zhang, Huiping; Wu, Lei; Cheng, Mingming

2018-03-12

It is well known that health inequality has been happening between rural and urban Chinese populations, however, the health differences among rural Chinese residents remain unclear. This study aims to assess the physical and mental health of rural Chinese residents in different social classes, and then to examine the mediating role of hopelessness between social class and health-related quality of life (HRQOL). A stratified multi-stage sampling was used to recruit 2003 rural residents responding to the 12-item Short Form Health Survey (SF-12). The results showed that lower-class rural Chinese residents reported lower physical and mental health as well as a higher level of hopelessness. Furthermore, hopelessness could fully mediate the association between social class and physical and mental health. These findings will generate significant implications for identifying those at particular risk for lower quality of life and designing social work intervention programs in rural China's context.
Multi-stage internal gear/turbine fuel pump

DOEpatents

Maier, Eugen; Raney, Michael Raymond

2004-07-06

A multi-stage internal gear/turbine fuel pump for a vehicle includes a housing having an inlet and an outlet and a motor disposed in the housing. The multi-stage internal gear/turbine fuel pump also includes a shaft extending axially and disposed in the housing. The multi-stage internal gear/turbine fuel pump further includes a plurality of pumping modules disposed axially along the shaft. One of the pumping modules is a turbine pumping module and another of the pumping modules is a gerotor pumping module for rotation by the motor to pump fuel from the inlet to the outlet.
Design of telehealth trials--introducing adaptive approaches.

PubMed

Law, Lisa M; Wason, James M S

2014-12-01

The field of telehealth and telemedicine is expanding as the need to improve efficiency of health care becomes more pressing. The decision to implement a telehealth system is generally an expensive undertaking that impacts a large number of patients and other stakeholders. It is therefore extremely important that the decision is fully supported by accurate evaluation of telehealth interventions. Numerous reviews of telehealth have described the evidence base as inconsistent. In response they call for larger, more rigorously controlled trials, and trials which go beyond evaluation of clinical effectiveness alone. The aim of this paper is to discuss various ways in which evaluation of telehealth could be improved by the use of adaptive trial designs. We discuss various adaptive design options, such as sample size reviews and changing the study hypothesis to address uncertain parameters, group sequential trials and multi-arm multi-stage trials to improve efficiency, and enrichment designs to maximise the chances of obtaining clear evidence about the telehealth intervention. There is potential to address the flaws discussed in the telehealth literature through the adoption of adaptive approaches to trial design. Such designs could lead to improvements in efficiency, allow the evaluation of multiple telehealth interventions in a cost-effective way, or accurately assess a range of endpoints that are important in the overall success of a telehealth programme. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.
Small Engine Technology. Task 4: Advanced Small Turboshaft Compressor (ASTC) Performance and Range Investigation

NASA Technical Reports Server (NTRS)

Hansen, Jeff L.; Delaney, Robert A.

1997-01-01

This contact had two main objectives involving both numerical and experimental investigations of a small highly loaded two-stage axial compressor designated Advanced Small Turboshaft Compressor (ASTC) winch had a design pressure ratio goal of 5:1 at a flowrate of 10.53 lbm/s. The first objective was to conduct 3-D Navier Stokes multistage analyses of the ASTC using several different flow modelling schemes. The second main objective was to complete a numerical/experimental investigation into stall range enhancement of the ASTC. This compressor was designed wider a cooperative Space Act Agreement and all testing was completed at NASA Lewis Research Center. For the multistage analyses, four different flow model schemes were used, namely: (1) steady-state ADPAC analysis, (2) unsteady ADPAC analysis, (3) steady-state APNASA analysis, and (4) steady state OCOM3D analysis. The results of all the predictions were compared to the experimental data. The steady-state ADPAC and APNASA codes predicted similar overall performance and produced good agreement with data, however the blade row performance and flowfield details were quite different. In general, it can be concluded that the APNASA average-passage code does a better job of predicting the performance and flowfield details of the highly loaded ASTC compressor.
Design, fabrication and performance of small, graphite electrode, multistage depressed collectors with 200-W, CW, 8- to 18-GHz traveling-wave tubes

NASA Technical Reports Server (NTRS)

Ebihara, Ben T.; Ramins, Peter

1987-01-01

Small multistage depressed collectors (MDC's) which used pyrolytic graphite, ion-beam-textured pyrolytic graphite, and isotropic graphite electrodes were designed, fabricated, and evaluated in conjuntion with 200-W, continuous wave (CW), 8- to 18-GHz traveling-wave tubes (TWT's). The design, construction, and performance of the MDC's are described. The bakeout performance of the collectors, in terms of gas evolution, was indistinguishable from that of typical production tubes with copper collectors. However, preliminary results indicate that some additional radiofrequency (RF) and dc beam processing time (and/or longer or higher temperature bakeouts) may be needed beyond that of typical copper electrode collectors. This is particularly true for pyrolytic graphite electrodes and for TWT's without appendage ion pumps. Extended testing indicated good long-term stability of the textured pyrolytic graphite and isotropic graphite electrode surfaces. The isotropic graphite in particular showed considerable promise as an MDC electrode material because of its high purity, low cost, simple construction, potential for very compact overall size, and relatively low secondary electron emission yield characteristics in the as-machined state. However, considerably more testing experience is required before definitive conclusions on its suitability for electronic countermeasure systems and space TWT's can be made.
Spatial Distribution and Sampling Plans for Grapevine Plant Canopy-Inhabiting Scaphoideus titanus (Hemiptera: Cicadellidae) Nymphs.

PubMed

Rigamonti, Ivo E; Brambilla, Carla; Colleoni, Emanuele; Jermini, Mauro; Trivellone, Valeria; Baumgärtner, Johann

2016-04-01

The paper deals with the study of the spatial distribution and the design of sampling plans for estimating nymph densities of the grape leafhopper Scaphoideus titanus Ball in vine plant canopies. In a reference vineyard sampled for model parameterization, leaf samples were repeatedly taken according to a multistage, stratified, random sampling procedure, and data were subjected to an ANOVA. There were no significant differences in density neither among the strata within the vineyard nor between the two strata with basal and apical leaves. The significant differences between densities on trunk and productive shoots led to the adoption of two-stage (leaves and plants) and three-stage (leaves, shoots, and plants) sampling plans for trunk shoots- and productive shoots-inhabiting individuals, respectively. The mean crowding to mean relationship used to analyze the nymphs spatial distribution revealed aggregated distributions. In both the enumerative and the sequential enumerative sampling plans, the number of leaves of trunk shoots, and of leaves and shoots of productive shoots, was kept constant while the number of plants varied. In additional vineyards data were collected and used to test the applicability of the distribution model and the sampling plans. The tests confirmed the applicability 1) of the mean crowding to mean regression model on the plant and leaf stages for representing trunk shoot-inhabiting distributions, and on the plant, shoot, and leaf stages for productive shoot-inhabiting nymphs, 2) of the enumerative sampling plan, and 3) of the sequential enumerative sampling plan. In general, sequential enumerative sampling was more cost efficient than enumerative sampling.
Young people, alcohol, and designer drinks: quantitative and qualitative study.

PubMed Central

Hughes, K.; MacKintosh, A. M.; Hastings, G.; Wheeler, C.; Watson, J.; Inglis, J.

1997-01-01

OBJECTIVE: To examine the appeal of "designer drinks" to young people. DESIGN: Qualitative and quantitative research comprising group discussions and questionnaire led interviews with young people accompanied by a self completion questionnaire. SETTINGS: Argyll and Clyde Health Board area, west Scotland. SUBJECTS: Eight groups aged 12-17 years; 824 aged 12-17 recruited by multistage cluster probability sample from the community health index. RESULTS: Young people were familiar with designer drinks, especially MD 20/20 and leading brands of strong white cider. Attitudes towards these drinks varied quite distinctly with age, clearly reflecting their attitudes towards and motivations for drinking in general. The brand imagery of designer drinks-in contrast with that of more mainstream drinks-matched many 14 and 15 year olds' perceptions and expectations of drinking. Popularity of designer drinks peaked between the ages of 13 and 16 while more conventional drinks showed a consistent increase in popularity with age. Consumption of designer drinks tended to be in less controlled circumstances and was associated with heavier alcohol intake and greater drunkenness. CONCLUSIONS: Designer drinks are a cause for concern. They appeal to young people, often more so than conventional drinks, and are particularly attractive to 14-16 year olds. Consumption of designer drinks is also associated with drinking in less controlled environments, heavier drinking, and greater drunkenness. There is a need for policy debate to assess the desirability of these drinks and the extent to which further controls on their marketing are required. PMID:9040387
Design, construction and evaluation of a 12.2 GHz, 4.0 kW-CW coupled-cavity traveling wave tube

NASA Technical Reports Server (NTRS)

Ayers, W. R.; Harman, W. A.

1973-01-01

An analytical and experimental program to study design techniques and to utilize these techniques to optimize the performance of an X-band 4 kW, CW traveling wave tube ultimately intended for satellite-borne television broadcast transmitters is described. The design is based on the coupled-cavity slow-wave circuit with velocity resynchronization to maximize the conversion efficiency. The design incorporates a collector which is demountable from the tube. This was done to facilitate multistage depressed collector experiments employing a NASA designed axisymmetric, electrostatic collector for linear beam microwave tubes after shipment of the tubes to NASA.
Descriptive epidemiology of chronic childhood adversity in Mexican adolescents.

PubMed

Benjet, Corina; Borges, Guilherme; Medina-Mora, María Elena; Zambrano, Joaquín; Cruz, Carlos; Méndez, Enrique

2009-11-01

To estimate the prevalence of adversity (neglect and abuse, parental loss, parental psychopathology, economic adversity, and serious physical illness), the interrelatedness of adversities, and their socio-demographic correlates. This is a multistage probability survey of 3005 adolescents aged 12-17 years residing in Mexico City. Youth were administered the computer-assisted adolescent version of the World Mental Health Composite International Diagnostic Interview in their homes. The childhood and posttraumatic stress disorder sections provided information regarding adversity. Descriptive and logistic regression analyses were performed considering the multistage and weighted sample design. A total of 68% of adolescents have experienced at least one type of chronic childhood adversity, whereas almost 7% have experienced four of more. The most frequent adversity is economic adversity followed by witnessing domestic violence. Boys experience more neglect than girls, and girls experience more sexual abuse than boys. Family dysfunction adversities tend to clump together such that youth exposed to abuse of any form also report witnessing domestic violence and parental mental pathology. Youth whose parents have divorced are likely to experience economic adversity. Parental death is independent of experiencing other childhood adversities. Older adolescents, school drop-outs, those with young mothers, those with more siblings, and those whose parents have less education are more likely to experience adversity. Although most adolescents have experienced some adversity, a small group is exposed to many adversities. Understanding the distribution of adversities may help us to identify at-risk youth and to better interpret the findings from studies on the role of adversity in diverse health outcomes.
The Effect of Instructional Analogies in Interaction with Logical Thinking Ability on Achievement and Attitude toward Chemistry

ERIC Educational Resources Information Center

Eskandar, Fathi-Azar; Bayrami, Mansor; Vahedi, Shahram; Ansar, Vahideh Abdollahi Adli

2013-01-01

We investigated the effect of instructional analogies in interaction with logical thinking ability on achievement and attitude towards chemistry. The participants were 147 female students from 6 8th grade classes in three public junior high schools selected by using a random multistage sampling method from five education districts in Tabriz, a…
Farmers' Participation in Extension Programs and Technology Adoption in Rural Nepal: A Logistic Regression Analysis

ERIC Educational Resources Information Center

Suvedi, Murari; Ghimire, Raju; Kaplowitz, Michael

2017-01-01

Purpose: This paper examines the factors affecting farmers' participation in extension programs and adoption of improved seed varieties in the hills of rural Nepal. Methodology/approach: Cross-sectional farm-level data were collected during July and August 2014. A sample of 198 farm households was selected for interviewing by using a multistage,…
Testing a Multi-Stage Screening System: Predicting Performance on Australia's National Achievement Test Using Teachers' Ratings of Academic and Social Behaviors

ERIC Educational Resources Information Center

Kettler, Ryan J.; Elliott, Stephen N.; Davies, Michael; Griffin, Patrick

2012-01-01

This study addresses the predictive validity of results from a screening system of academic enablers, with a sample of Australian elementary school students, when the criterion variable is end-of-year achievement. The investigation included (a) comparing the predictive validity of a brief criterion-referenced nomination system with more…
Multistage Complexity in Language Proficiency Assessment: A Framework for Aligning Theoretical Perspectives, Test Development, and Psychometrics

ERIC Educational Resources Information Center

Luecht, Richard M.

2003-01-01

This article contends that the necessary links between constructs and test scores/decisions in language assessment must be established through principled design procedures that align three models: (1) a theoretical construct model; (2) a test development model; and (3) a psychometric scoring model. The theoretical construct model articulates the…
Validation of the Systematic Screening for Behavior Disorders in Middle and Junior High School

ERIC Educational Resources Information Center

Caldarella, Paul; Young, Ellie L.; Richardson, Michael J.; Young, Benjamin J.; Young, K. Richard

2008-01-01

The Systematic Screening for Behavior Disorders (SSBD), a multistage screening system designed to identify elementary school--age children at risk for emotional and behavioral disorders, was evaluated for use with middle and junior high school students. During SSBD Stage 1, teachers identified 123 students in grades 6 through 9 with…
Collective Research Projects in the History of Mathematics Classroom

ERIC Educational Resources Information Center

Despeaux, Sloan Evans

2014-01-01

In this article, I will discuss a collective research project that I designed for my History of Mathematics course. My students, who are by and large pre-service teachers, explored online, digital versions of 18th-century British almanacs that contained question-and-answer sections for mathematics. In a multi-stage research process, they explored…
Predicting the Performance of an Axial-Flow Compressor

NASA Technical Reports Server (NTRS)

Steinke, R. J.

1986-01-01

Stage-stacking computer code (STGSTK) developed for predicting off-design performance of multi-stage axial-flow compressors. Code uses meanline stagestacking method. Stage and cumulative compressor performance calculated from representative meanline velocity diagrams located at rotor inlet and outlet meanline radii. Numerous options available within code. Code developed so user modify correlations to suit their needs.
Trends in physical activity, sedentary behavior, diet, and BMI among US adolescents, 2001-2009.

PubMed

Iannotti, Ronald J; Wang, Jing

2013-10-01

The high prevalence of adolescent obesity in the United States has been attributed to population changes in physical activity (PA), sedentary behaviors, and dietary behaviors. This study examines 8-year trends in these behaviors in US adolescents ages 11 to 16. Nationally representative samples of US students in grades 6 to 10 were recruited during the 2001-2002 (N = 14607), 2005-2006 (N = 9150), and 2009-2010 (N = 10848) school years by using multistage stratified designs, with census regions and grades as strata, and school districts as the primary sampling units. African-American and Hispanic students were oversampled to obtain better estimates for those groups. Using the Health Behavior in School-aged Children quadrennial surveys, identical questions assessed BMI, PA, and sedentary and dietary behaviors at each school year. Logistic and linear regression analyses were conducted taking into account the sampling design and controlling for age, gender, race/ethnicity, and family affluence. Across the quadrennial surveys, significant increases were identified in number of days with at least 60 minutes of PA, daily consumption of fruits and vegetables, eating breakfast on weekdays and weekends, and BMI. Television viewing and consumption of sweets and sweetened beverages decreased across this same period. These same patterns were seen in all racial/ethnic groups. These patterns suggest that public health efforts to improve the obesity-related behaviors of US adolescents may be having some success. However, alternative explanations for the increase in BMI over the same period need to be considered.
Analysis of the chemical composition of ultrafine particles from two domestic solid biomass fired room heaters under simulated real-world use

NASA Astrophysics Data System (ADS)

Ozgen, Senem; Becagli, Silvia; Bernardoni, Vera; Caserini, Stefano; Caruso, Donatella; Corbella, Lorenza; Dell'Acqua, Manuela; Fermo, Paola; Gonzalez, Raquel; Lonati, Giovanni; Signorini, Stefano; Tardivo, Ruggero; Tosi, Elisa; Valli, Gianluigi; Vecchi, Roberta; Marinovich, Marina

2017-02-01

Two common types of wood (beech and fir) were burned in commercial pellet (11.1 kW) and wood (8.2 kW) stoves following a combustion cycle simulating the behavior of a real-world user. Ultrafine particulate matter (UFP, dp < 100 nm) was sampled with three parallel multistage impactors and analyzed for metals, main water soluble ions, anhydrosugars, total carbon, and PAH content. The measurement of the number concentration and size distribution was also performed by a fourth multistage impactor. UFP mass emission factors averaged to 424 mg/kgfuel for all the tested stove and wood type (fir, beech) combinations except for beech log burning in the wood stove (838 mg/kgfuel). Compositional differences were observed for pellets and wood UFP samples, where high TC levels characterize the wood log combustion and potassium salts are dominant in every pellet sample. Crucial aspects determining the UFP composition in the wood stove experiments are critical situations in terms of available oxygen (a lack or an excess of combustion air) and high temperatures. Whereas for the automatically controlled pellets stove local situations (e.g., hindered air-fuel mixing due to heaps of pellets on the burner pot) determine the emission levels and composition. Wood samples contain more potentially carcinogenic PAHs with respect to pellets samples. Some diagnostic ratios related to PAH isomers and anhydrosugars compiled from experimental UFP data in the present study and compared to literature values proposed for the emission source discrimination for atmospheric aerosol, extend the evaluation usually limited to higher particle size fractions also to UFP.
STGSTK- PREDICTING MULTISTAGE AXIAL-FLOW COMPRESSOR PERFORMANCE BY A MEANLINE STAGE-STACKING METHOD

NASA Technical Reports Server (NTRS)

Steinke, R. J.

1994-01-01

The STGSTK computer program was developed for predicting the off-design performance of multistage axial-flow compressors. The axial-flow compressor is widely used in aircraft engines. In addition to its inherent advantage of high mass flow per frontal area, it can exhibit very good aerodynamic performance. However, good aerodynamic performance over an acceptable range of operating conditions is not easily attained. STGSTK provides an analytical tool for the development of new compressor designs. The simplicity of a one-dimensional compressible flow model enables the stage-stacking method used in STGSTK to have excellent convergence properties and short computer run times. Also, the simplicity of the model makes STGSTK a manageable code that eases the incorporation, or modification, of empirical correlations directly linked to test data. Thus, the user can adapt the code to meet varying design needs. STGSTK uses a meanline stage-stacking method to predict off-design performance. Stage and cumulative compressor performance is calculated from representative meanline velocity diagrams located at rotor inlet and outlet meanline radii. STGSTK includes options for the following: 1) non-dimensional stage characteristics may be input directly or calculated from stage design performance input, 2) stage characteristics may be modified for off-design speed and blade reset, and 3) rotor design deviation angle may be modified for off-design flow, speed, and blade setting angle. Many of the code's options use correlations that are normally obtained from experimental data. The STGSTK user may modify these correlations as needed. This program is written in FORTRAN IV for batch execution and has been implemented on an IBM 370 series computer with a central memory requirement of approximately 85K of 8 bit bytes. STGSTK was developed in 1982.
Core compressor exit stage study. Volume 3: Data and performance report for screening test configurations

NASA Technical Reports Server (NTRS)

Wisler, D. C.

1980-01-01

Rear stage blading designs that have lower losses in their endwall boundary layer regions were developed. Test data and performance results for rotor B, stator B, and stator C - blading designs that offer promise of reducing endwall losses relative to the baseline are given. A low speed research compressor was the principal investigative tool. The tests were conducted using four identical stages of blading so that the test data would be obtained in a true multistage environment.

Users manual and modeling improvements for axial turbine design and performance computer code TD2-2

NASA Technical Reports Server (NTRS)

Glassman, Arthur J.

1992-01-01

Computer code TD2 computes design point velocity diagrams and performance for multistage, multishaft, cooled or uncooled, axial flow turbines. This streamline analysis code was recently modified to upgrade modeling related to turbine cooling and to the internal loss correlation. These modifications are presented in this report along with descriptions of the code's expanded input and output. This report serves as the users manual for the upgraded code, which is named TD2-2.
Spatial filters for high-peak-power multistage laser amplifiers.

PubMed

Potemkin, A K; Barmashova, T V; Kirsanov, A V; Martyanov, M A; Khazanov, E A; Shaykin, A A

2007-07-10

We describe spatial filters used in a Nd:glass laser with an output pulse energy up to 300 J and a pulse duration of 1 ns. This laser is designed for pumping of a chirped-pulse optical parametric amplifier. We present data required to choose the shape and diameter of a spatial filter lens, taking into account aberrations caused by spherical surfaces. Calculation of the optimal pinhole diameter is presented. Design features of the spatial filters and the procedure of their alignment are discussed in detail.
Picosecond x-ray streak cameras

NASA Astrophysics Data System (ADS)

Averin, V. I.; Bryukhnevich, Gennadii I.; Kolesov, G. V.; Lebedev, Vitaly B.; Miller, V. A.; Saulevich, S. V.; Shulika, A. N.

1991-04-01

The first multistage image converter with an X-ray photocathode (UMI-93 SR) was designed in VNIIOFI in 1974 [1]. The experiments carried out in IOFAN pointed out that X-ray electron-optical cameras using the tube provided temporal resolution up to 12 picoseconds [2]. The later work has developed into the creation of the separate streak and intensifying tubes. Thus, PV-003R tube has been built on base of UMI-93SR design, fibre optically connected to PMU-2V image intensifier carrying microchannel plate.
Design of penicillin fermentation process simulation system

NASA Astrophysics Data System (ADS)

Qi, Xiaoyu; Yuan, Zhonghu; Qi, Xiaoxuan; Zhang, Wenqi

2011-10-01

Real-time monitoring for batch process attracts increasing attention. It can ensure safety and provide products with consistent quality. The design of simulation system of batch process fault diagnosis is of great significance. In this paper, penicillin fermentation, a typical non-linear, dynamic, multi-stage batch production process, is taken as the research object. A visual human-machine interactive simulation software system based on Windows operation system is developed. The simulation system can provide an effective platform for the research of batch process fault diagnosis.
Optimization of Adaboost Algorithm for Sonar Target Detection in a Multi-Stage ATR System

NASA Technical Reports Server (NTRS)

Lin, Tsung Han (Hank)

2011-01-01

JPL has developed a multi-stage Automated Target Recognition (ATR) system to locate objects in images. First, input images are preprocessed and sent to a Grayscale Optical Correlator (GOC) filter to identify possible regions-of-interest (ROIs). Second, feature extraction operations are performed using Texton filters and Principal Component Analysis (PCA). Finally, the features are fed to a classifier, to identify ROIs that contain the targets. Previous work used the Feed-forward Back-propagation Neural Network for classification. In this project we investigate a version of Adaboost as a classifier for comparison. The version we used is known as GentleBoost. We used the boosted decision tree as the weak classifier. We have tested our ATR system against real-world sonar images using the Adaboost approach. Results indicate an improvement in performance over a single Neural Network design.
Evaluation method of membrane performance in membrane distillation process for seawater desalination.

PubMed

Chung, Seungjoon; Seo, Chang Duck; Choi, Jae-Hoon; Chung, Jinwook

2014-01-01

Membrane distillation (MD) is an emerging desalination technology as an energy-saving alternative to conventional distillation and reverse osmosis method. The selection of appropriate membrane is a prerequisite for the design of an optimized MD process. We proposed a simple approximation method to evaluate the performance of membranes for MD process. Three hollow fibre-type commercial membranes with different thicknesses and pore sizes were tested. Experimental results showed that one membrane was advantageous due to the highest flux, whereas another membrane was due to the lowest feed temperature drop. Regression analyses and multi-stage calculations were used to account for the trade-offeffects of flux and feed temperature drop. The most desirable membrane was selected from tested membranes in terms of the mean flux in a multi-stage process. This method would be useful for the selection of the membranes without complicated simulation techniques.
Multi-stage fuel cell system method and apparatus

DOEpatents

George, Thomas J.; Smith, William C.

2000-01-01

A high efficiency, multi-stage fuel cell system method and apparatus is provided. The fuel cell system is comprised of multiple fuel cell stages, whereby the temperatures of the fuel and oxidant gas streams and the percentage of fuel consumed in each stage are controlled to optimize fuel cell system efficiency. The stages are connected in a serial, flow-through arrangement such that the oxidant gas and fuel gas flowing through an upstream stage is conducted directly into the next adjacent downstream stage. The fuel cell stages are further arranged such that unspent fuel and oxidant laden gases too hot to continue within an upstream stage because of material constraints are conducted into a subsequent downstream stage which comprises a similar cell configuration, however, which is constructed from materials having a higher heat tolerance and designed to meet higher thermal demands. In addition, fuel is underutilized in each stage, resulting in a higher overall fuel cell system efficiency.
Analysis of fatigue reliability for high temperature and high pressure multi-stage decompression control valve

NASA Astrophysics Data System (ADS)

Yu, Long; Xu, Juanjuan; Zhang, Lifang; Xu, Xiaogang

2018-03-01

Based on stress-strength interference theory to establish the reliability mathematical model for high temperature and high pressure multi-stage decompression control valve (HMDCV), and introduced to the temperature correction coefficient for revising material fatigue limit at high temperature. Reliability of key dangerous components and fatigue sensitivity curve of each component are calculated and analyzed by the means, which are analyzed the fatigue life of control valve and combined with reliability theory of control valve model. The impact proportion of each component on the control valve system fatigue failure was obtained. The results is shown that temperature correction factor makes the theoretical calculations of reliability more accurate, prediction life expectancy of main pressure parts accords with the technical requirements, and valve body and the sleeve have obvious influence on control system reliability, the stress concentration in key part of control valve can be reduced in the design process by improving structure.
Enhancing Community Knowledge and Health Behaviors to Eliminate Blinding Trachoma in Mali Using Radio Messaging as a Strategy

ERIC Educational Resources Information Center

Bamani, Sanoussi; Toubali, Emily; Diarra, Sadio; Goita, Seydou; Berte, Zana; Coulibaly, Famolo; Sangare, Hama; Tuinsma, Marjon; Zhang, Yaobi; Dembele, Benoit; Melvin, Palesa; MacArthur, Chad

2013-01-01

The National Blindness Prevention Program in Mali has broadcast messages on the radio about trachoma as part of the country's trachoma elimination strategy since 2008. In 2011, a radio impact survey using multi-stage cluster sampling was conducted in the regions of Kayes and Segou to assess radio listening habits, coverage of the broadcasts,…
Assessing insect-induced tree mortality across large areas with high-resolution aerial photography in a multistage sample

Treesearch

Randy Hamilton; Kevin Megown; James Ellenwood; Henry Lachowski; Paul Maus

2010-01-01

In recent years, unprecedented tree mortality has occurred throughout the national forests owing to insect infestations and disease outbreaks. The magnitude and extent of mortality, coupled with the lack of routine monitoring in some areas, has made it difficult to assess the damage, associated ecological impact, and fire hazard in a timely and cost-effective manner....
Teacher Self-Efficacy Enhancement and School Location: Implication for Students' Achievement in Economics in Senior Secondary School in Ibadan, Oyo State, Nigeria

ERIC Educational Resources Information Center

Durowoju, Esther O.; Onuka, Adams O. U.

2015-01-01

The paper investigated the effect of teacher self-efficacy enhancement and school location on students' achievement in Economics in Senior Secondary School in Ibadan Metropolis of Oyo State, Nigeria. Three hypotheses were tested at 0.05 level of significance. Multi-stage sampling technique was adopted in the study. Four Local Government Areas (two…
Producing Multimodal Picture Books and Dramatic Performances in a Core French Classroom: An Exploratory Case Study

ERIC Educational Resources Information Center

Early, Margaret; Yeung, Cindy

2009-01-01

In a Grade 9 core French class, the teacher designed a multi-stage project in which students composed original children's stories in French; illustrated their stories to produce picture books; then, in groups, adapted one group member's story into a play script; and, finally, dramatized the scripts for children from the local French immersion…
Computational analysis of a multistage axial compressor

NASA Astrophysics Data System (ADS)

Mamidoju, Chaithanya

Turbomachines are used extensively in Aerospace, Power Generation, and Oil & Gas Industries. Efficiency of these machines is often an important factor and has led to the continuous effort to improve the design to achieve better efficiency. The axial flow compressor is a major component in a gas turbine with the turbine's overall performance depending strongly on compressor performance. Traditional analysis of axial compressors involves throughflow calculations, isolated blade passage analysis, Quasi-3D blade-to-blade analysis, single-stage (rotor-stator) analysis, and multi-stage analysis involving larger design cycles. In the current study, the detailed flow through a 15 stage axial compressor is analyzed using a 3-D Navier Stokes CFD solver in a parallel computing environment. Methodology is described for steady state (frozen rotor stator) analysis of one blade passage per component. Various effects such as mesh type and density, boundary conditions, tip clearance and numerical issues such as turbulence model choice, advection model choice, and parallel processing performance are analyzed. A high sensitivity of the predictions to the above was found. Physical explanation to the flow features observed in the computational study are given. The total pressure rise verses mass flow rate was computed.
CFD-Modeling of the Multistage Gasifier Capacity of 30 KW

NASA Astrophysics Data System (ADS)

Levin, A. A.; Kozlov, A. N.; Svishchev, D. A.; Donskoy, I. G.

2017-11-01

Single-stage fuel gasification processes have been developed and widely studied in Russia and abroad throughout the 20th century. They are fundamental to the creation and design of modern gas generator equipment. Many studies have shown that single-stage gasification process, have already reached the limit of perfection, which was a significant improvement in their performance becomes impossible and unprofitable. The most fully meet modern technical requirements of multistage gasification technology. In the first step of the process, is organized allothermic biomass pyrolysis using heat of exhaust gas and generating power plant. At this stage, the yield of volatile products (gas and tar) of fuel. In the second step, the layer of fuel is, the tar is decomposed by the action of hot air and steam, steam-gas mixture is formed further reacts with the charcoal in the third process stage. The paper presents a model developed by the authors of the multi-stage gasifier for wood chips. The model is made with the use of CFD-modeling software package (COMSOL Multiphisics). To describe the kinetics of wood pyrolysis and gasification of charcoal studies were carried out using a set of simultaneous thermal analysis. For this complex developed original methods of interpretation of measurements, including methods of technical analysis of fuels and determine the parameters of the detailed kinetics and mechanism of pyrolysis.
A multistage stochastic programming model for a multi-period strategic expansion of biofuel supply chain under evolving uncertainties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, Fei; Huang, Yongxi

Here, we develop a multistage, stochastic mixed-integer model to support biofuel supply chain expansion under evolving uncertainties. By utilizing the block-separable recourse property, we reformulate the multistage program in an equivalent two-stage program and solve it using an enhanced nested decomposition method with maximal non-dominated cuts. We conduct extensive numerical experiments and demonstrate the application of the model and algorithm in a case study based on the South Carolina settings. The value of multistage stochastic programming method is also explored by comparing the model solution with the counterparts of an expected value based deterministic model and a two-stage stochastic model.
A multistage stochastic programming model for a multi-period strategic expansion of biofuel supply chain under evolving uncertainties

DOE PAGES

Xie, Fei; Huang, Yongxi

2018-02-04

Here, we develop a multistage, stochastic mixed-integer model to support biofuel supply chain expansion under evolving uncertainties. By utilizing the block-separable recourse property, we reformulate the multistage program in an equivalent two-stage program and solve it using an enhanced nested decomposition method with maximal non-dominated cuts. We conduct extensive numerical experiments and demonstrate the application of the model and algorithm in a case study based on the South Carolina settings. The value of multistage stochastic programming method is also explored by comparing the model solution with the counterparts of an expected value based deterministic model and a two-stage stochastic model.
ERTS data user investigation to develop a multistage forest sampling inventory system

NASA Technical Reports Server (NTRS)

Langley, P. G.; Vanroessel, J. W. (Principal Investigator); Wert, S. L.

1973-01-01

The author has identified the following significant results. A system to provide precision annotation of predetermined forest inventory sampling units on the ERTS-1 MSS images was developed. In addition, an annotation system for high altitude U2 photographs was completed. MSS bulk image accuracy is good enough to allow the use of one square mile sampling units. IMANCO image analyzer interpretation work for small scale images demonstrated the need for much additional analyses. Continuing image interpretation work for the next reporting period is concentrated on manual image interpretation work as well as digital interpretation system development using the computer compatible tapes.
Exploring breast cancer preventive lifestyle and social support of Iranian women: a study protocol for a mixed-methods approach.

PubMed

Khazaee-Pool, Maryam; Pashaei, Tahereh; Jahangiry, Leila; Ponnet, Koen; Gholami, Ali

2017-06-07

It is widely accepted that a healthy lifestyle may decrease the probability of developing cancer. This study aimed to describe a study protocol that makes it possible to explore preventive health lifestyles of Iranian women and their received social support for the purpose of developing cultural strategies to increase breast cancer prevention. A mixed-methods study will be accomplished in two sequential parts. First, a cross-sectional study will be conducted in which 2,250 Iranian women are recruited by using a random multistage cluster sampling of 20 health care centers. Structured face-to-face interviews will be conducted to obtain information on the participants' health lifestyle and perceived social support. Data will be analyzed using both multivariate regression and structural equation modeling techniques. Then, a qualitative study will be conducted among employed women using a purposive sampling design. Data will be collected by means of focus groups and semi-structured interviews and will be analyzed using a conventional content analysis approach. The results of the quantitative and qualitative study will be used to develop breast cancer preventive strategies. Researchers need to acquire knowledge regarding the lifestyle and perceived social support of Iranian women that will foster culturally competent approaches to promote healthy lifestyles to develop breast cancer preventive strategies. Examining breast cancer preventive lifestyles provides valuable information for designing applicable intervention programs for improving women's health.
Simulation of multistage turbine flows

NASA Technical Reports Server (NTRS)

Adamczyk, John J.; Mulac, Richard A.

1987-01-01

A flow model has been developed for analyzing multistage turbomachinery flows. This model, referred to as the average passage flow model, describes the time-averaged flow field with a typical passage of a blade row embedded within a multistage configuration. Computer resource requirements, supporting empirical modeling, formulation code development, and multitasking and storage are discussed. Illustrations from simulations of the space shuttle main engine (SSME) fuel turbine performed to date are given.
Mixed response and time-to-event endpoints for multistage single-arm phase II design.

PubMed

Lai, Xin; Zee, Benny Chung-Ying

2015-06-04

The objective of phase II cancer clinical trials is to determine if a treatment has sufficient activity to warrant further study. The efficiency of a conventional phase II trial design has been the object of considerable debate, particularly when the study regimen is characteristically cytostatic. At the time of development of a phase II cancer trial, we accumulated clinical experience regarding the time to progression (TTP) for similar classes of drugs and for standard therapy. By considering the time to event (TTE) in addition to the tumor response endpoint, a mixed-endpoint phase II design may increase the efficiency and ability of selecting promising cytotoxic and cytostatic agents for further development. We proposed a single-arm phase II trial design by extending the Zee multinomial method to fully use mixed endpoints with tumor response and the TTE. In this design, the dependence between the probability of response and the TTE outcome is modeled through a Gaussian copula. Given the type I and type II errors and the hypothesis as defined by the response rate (RR) and median TTE, such as median TTP, the decision rules for a two-stage phase II trial design can be generated. We demonstrated through simulation that the proposed design has a smaller expected sample size and higher early stopping probability under the null hypothesis than designs based on a single-response endpoint or a single TTE endpoint. The proposed design is more efficient for screening new cytotoxic or cytostatic agents and less likely to miss an effective agent than the alternative single-arm design.

Deep Vein Thrombosis After Complex Posterior Spine Surgery: Does Staged Surgery Make a Difference?

PubMed

Edwards, Charles C; Lessing, Noah L; Ford, Lisa; Edwards, Charles C

Retrospective review of a prospectively collected database. To assess the incidence of deep vein thrombosis (DVT) associated with single- versus multistage posterior-only complex spinal surgeries. Dividing the physiologic burden of spinal deformity surgery into multiple stages has been suggested as a potential means of reducing perioperative complications. DVT is a worrisome complication owing to its potential to lead to pulmonary embolism. Whether or not staging affects DVT incidence in this population is unknown. Consecutive patients undergoing either single- or multistage posterior complex spinal surgeries over a 12-year period at a single institution were eligible. All patients received lower extremity venous duplex ultrasonographic (US) examinations 2 to 4 days postoperatively in the single-stage group and 2 to 4 days postoperatively after each stage in the multistage group. Multivariate logistic regression was used to assess the independent contribution of staging to developing a DVT. A total of 107 consecutive patients were enrolled-26 underwent multistage surgery and 81 underwent single-stage surgery. The single-stage group was older (63 years vs. 45 years; p < .01) and had a higher Charlson comorbidity index (2.25 ± 1.27 vs. 1.23 ± 1.58; p < .01). More multistage patients had positive US tests than single-stage patients (5 of 26 vs. 6 of 81; 19% vs. 7%; p = .13). Adjusting for all the above-mentioned covariates, a multistage surgery was 8.17 (95% CI 0.35-250.6) times more likely to yield a DVT than a single-stage surgery. Patients who undergo multistage posterior complex spine surgery are at a high risk for developing a DVT compared to those who undergo single-stage procedures. The difference in DVT incidence may be understated as the multistage group had a lower pre- and intraoperative risk profile with a younger age, lower medical comorbidities, and less per-stage blood loss. Copyright © 2017 Scoliosis Research Society. Published by Elsevier Inc. All rights reserved.
Application of the theory of reasoned action to promoting breakfast consumption

PubMed Central

Hosseini, Zahra; Gharlipour Gharghani, Zabihollah; Mansoori, Anahita; Aghamolaei, Teamur; Mohammadi Nasrabadi, Maryam

2015-01-01

Background: Breakfast is the most important daily meal, but neglected more than other meals by children and adolescents. The aim of this study was to evaluate the effectiveness of an educational intervention, based on the Theory of Reasoned Action (TRA) to increase breakfast consumption among school children in Bandar Abbas, Iran. Methods: In this quasi experimental study which was conducted in 2012, 88 students of four secondary schools in Bandar Abbas, south of Iran, were enrolled. Multi-stage cluster sampling was performed with random allocation of interventional and control groups. The study tool was a questionnaire which was filled by the students before and two months after the educational intervention. For data analysis, statistical tests including paired-samples t-test, independent samples t-test, Wilcoxon test, and Mann-Whitney test were used through SPSS v.18 software. Results: The result of the study showed that application of TRA significantly increased scores of behavior of breakfast consumption (p<0.01). After the intervention, a significant increase was revealed in all nutrition intakes, except for fat and sugar (p<0.01). Conclusion: The findings support application of the TRA in improving the intention and behavior of breakfast consumption. Applying this theory for designing interventions to increase breakfast eating is recommended. PMID:26913252
Purification and Quantification of an Isomeric Compound in a Mixture by Collisional Excitation in Multistage Mass Spectrometry Experiments.

PubMed

Jeanne Dit Fouque, Dany; Maroto, Alicia; Memboeuf, Antony

2016-11-15

The differentiation, characterization, and quantification of isomers and/or isobars in mixtures is a recurrent problem in mass spectrometry and more generally in analytical chemistry. Here we present a new strategy to assess the purity of a compound that is susceptible to be contaminated with another isomeric side-product in trace levels. Providing one of the isomers is available as pure sample, this new strategy allows the detection of isomeric contamination. This is done thanks to a "gas-phase collisional purification" inside an ion trap mass spectrometer paving the way for an improved analysis of at least similar samples. This strategy consists in using collision induced dissociation (CID) multistage mass spectrometry (MS 2 and MS 3 ) experiments and the survival yield (SY) technique. It has been successfully applied to mixtures of cyclic poly( L -lactide) (PLA) with increasing amounts of its linear topological isomer. Purification in gas phase of PLA mixtures was established based on SY curves obtained in MS 3 mode: all samples gave rise to the same SY curve corresponding then to the pure cyclic component. This new strategy was sensitive enough to detect traces of linear PLA (<3%) in a sample of cyclic PLA that was supposedly pure according to other characterization techniques ( 1 H NMR, MALDI-HRMS, and size-exclusion chromatography). Moreover, in this case, the presence of linear isomer was undetectable according to MS/MS or MS/MS/MS analysis only as fragment ions are also of the same m/z values. This type of approach could easily be implemented in hyphenated mass spectrometric techniques to improve the structural and quantitative analysis of complex samples.
Prevalence of overweight and obesity and some associated factors among adult residents of northeast China: a cross-sectional study

PubMed Central

Zhang, Peng; Gao, Chunshi; Li, Zhijun; Lv, Xin; Song, Yuanyuan; Yu, Yaqin; Li, Bo

2016-01-01

Objectives This study aims to estimate the prevalence of overweight and obesity and determine potential influencing factors among adults in northeast China. Methods A cross-sectional survey was conducted in Jilin Province, northeast China, in 2012. A total of 9873 men and 10 966 women aged 18–79 years from the general population were included using a multistage stratified random cluster sampling design. Data were obtained from face-to-face interview and physical examination. After being weighted according to a complex sampling scheme, the sample was used to estimate the prevalence of overweight (body mass index (BMI) 24–27.9 kg/m2) and obesity (BMI >28 kg/m2) in Jilin Province, and analyse influencing factors through corresponding statistical methods based on complex sampling design behaviours. Results The overall prevalence of overweight was 32.3% (male 34.3%; female 30.2%), and the prevalence of obesity was 14.6% (male 16.3%; female 12.8%) in Jilin Province. The prevalence of both overweight and obesity were higher in men than women (p<0.001). Influencing factors included sex, age, marriage status, occupation, smoking, drinking, diet and hours of sleep (p<0.05). Conclusions This study estimated that the prevalence of overweight and obesity among adult residents of Jilin Province, northeast China, were high. The results of this study will be submitted to the Health Department of Jilin Province and other relevant departments as a reference, which should inform policy makers in developing education and publicity to prevent and control the occurrence of overweight and obesity. PMID:27456326
Prevalence of overweight and obesity and some associated factors among adult residents of northeast China: a cross-sectional study.

PubMed

Wang, Rui; Zhang, Peng; Gao, Chunshi; Li, Zhijun; Lv, Xin; Song, Yuanyuan; Yu, Yaqin; Li, Bo

2016-07-25

This study aims to estimate the prevalence of overweight and obesity and determine potential influencing factors among adults in northeast China. A cross-sectional survey was conducted in Jilin Province, northeast China, in 2012. A total of 9873 men and 10 966 women aged 18-79 years from the general population were included using a multistage stratified random cluster sampling design. Data were obtained from face-to-face interview and physical examination. After being weighted according to a complex sampling scheme, the sample was used to estimate the prevalence of overweight (body mass index (BMI) 24-27.9 kg/m(2)) and obesity (BMI >28 kg/m(2)) in Jilin Province, and analyse influencing factors through corresponding statistical methods based on complex sampling design behaviours. The overall prevalence of overweight was 32.3% (male 34.3%; female 30.2%), and the prevalence of obesity was 14.6% (male 16.3%; female 12.8%) in Jilin Province. The prevalence of both overweight and obesity were higher in men than women (p<0.001). Influencing factors included sex, age, marriage status, occupation, smoking, drinking, diet and hours of sleep (p<0.05). This study estimated that the prevalence of overweight and obesity among adult residents of Jilin Province, northeast China, were high. The results of this study will be submitted to the Health Department of Jilin Province and other relevant departments as a reference, which should inform policy makers in developing education and publicity to prevent and control the occurrence of overweight and obesity. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
Impact of healthy work environments and multistage nurse residency programs on retention of newly licensed RNs.

PubMed

Kramer, Marlene; Halfer, Diana; Maguire, Pat; Schmalenberg, Claudia

2012-03-01

The objective of the study was to examine effects of nurse-confirmed healthy unit work environments and multistage nurse residency programs (NRPs) on retention rates of newly licensed RNs (NLRNs). Establishing a culture of retention and healthy clinical nurse practice environments are two major challenges confronting nurse leaders today. Nurse residency programs are a major component of NLRN work environments and have been shown to be effective in abating nurse turnover. Sample for this study consisted of 5,316 new graduates in initial RN roles in 28 Magnet® hospitals. There were no differences in retention rates by education or patient population on clinical unit. NLRN retention rate was higher in community than in academic hospitals. More than half of NLRNs were placed on units with very healthy work environments. Newly licensed RNs on units with work environments needing improvement resigned at a significantly higher rate than did other NLRNs. The quality of clinical unit work environments is the most important factor in NLRN retention.
Nitrogen removal performance and microbial community of an enhanced multistage A/O biofilm reactor treating low-strength domestic wastewater.

PubMed

Chen, Han; Li, Ang; Wang, Qiao; Cui, Di; Cui, Chongwei; Ma, Fang

2018-06-01

The low-strength domestic wastewater (LSDW) treatment with low chemical oxygen demand (COD) has drawn extensive attention for the poor total nitrogen (TN) removal performance. In the present study, an enhanced multistage anoxic/oxic (A/O) biofilm reactor was designed to improve the TN removal performance of the LSDW treatment. Efficient nitrifying and denitrifying biofilm carriers were cultivated and then filled into the enhanced biofilm reactor as the sole microbial source. Step-feed strategy and internal recycle were adopted to optimize the substrate distribution and the organics utilization. Key operational parameters were optimized to obtain the best nitrogen and organics removal efficiencies. A hydraulic retention time of 8 h, an influent distribution ratio of 2:1 and an internal recycle ratio of 200% were tested as the optimum parameters. The ammonium, TN and COD removal efficiencies under the optimal operational parameters separately achieved 99.75 ± 0.21, 59.51 ± 1.95 and 85.06 ± 0.79% with an organic loading rate at around 0.36 kg COD/m 3 d. The high-throughput sequencing technology confirmed that nitrifying and denitrifying biofilm could maintain functional bacteria in the system during long-period operation. Proteobacteria and Bacteroidetes were the dominant phyla in all the nitrifying and denitrifying biofilm samples. Nitrosomonadaceae_uncultured and Nitrospira sp. stably existed in nitrifying biofilm as the main nitrifiers, while several heterotrophic genera, such as Thauera sp. and Flavobacterium sp., acted as potential genera responsible for TN removal in denitrifying biofilm. These findings suggested that the enhanced biofilm reactor could be a promising route for the treatment of LSDW with a low COD level.
The feasibility study of 177Lu production in Miniature Neutron Source Reactors using a multi-stage approach in Isfahan, Iran.

PubMed

Golabian, A; Hosseini, M A; Ahmadi, M; Soleimani, B; Rezvanifard, M

2018-01-01

Miniature neutron source reactors (MNSRs) are among the safest and economic research reactors with potentials to be used for neutron studies. This manuscript explores the feasibility of 177 Lu production in Isfahan MNSR reactor using direct production route. In this study, to assess the specific activity of the produced radioisotope, a simulation was carried out through the MCNPX2.6 code. The simulation was validated by irradiating a lutetium disc-like (99.98 chemical purity) at the thermal neutron flux of 5 × 10 11 ncm 2 s -1 and an irradiation time of 4min. After the spectrometry of the irradiated sample, the experimental results of 177 Lu production were compared with the simulation results. In addition, factor from the simulation was extracted by replacing it in the related equations in order to calculate specific activity through a multi-stage approach, and by using different irradiation techniques. The results showed that the simulation technique designed in this study is in agreement with the experimental approach (with a difference of approximately 3%). It was also found that the maximum 177 Lu production at the maximum flux and irradiation time allows access to 723.5mCi/g after 27 cycles. Furthermore, the comparison of irradiation techniques showed that increasing the irradiation time is more effective in 177 Lu production efficiency than increasing the number of irradiation cycles. In a way that increasing the irradiation time would postpone the saturation of the productions. On the other hand, it was shown that the choice of an appropriate irradiation technique for 177 Lu production can be economically important in term of the effective fuel consumption in the reactor. Copyright © 2017 Elsevier Ltd. All rights reserved.
Effectiveness of Family, Child, and Family-Child Based Intervention on ADHD Symptoms of Students with Disabilities

ERIC Educational Resources Information Center

Malekpour, Mokhtar; Aghababaei, Sara; Hadi, Samira

2014-01-01

The aim of the present study was to investigate and compare the effectiveness of family, child, and family-child based intervention on the rate of ADHD symptoms in third grade students. The population for this study was all of students with ADHD diagnoses in the city of Isfahan, Iran. The multistage random sampling method was used to select the 60…
[Personality profile among cocaine users].

PubMed

Sánchez Huesca, R; Guisa Cruz, V M; Cedillo González, A; Pascual Blanco, Y

2002-01-01

Due to the psychiatric comorbidity seen among cocaine addicts, it is of clinical interest to know the personality traits associated to the use of this substance. Personality-profile comparative study of cocaine users and multiple-substance users obtained through the Multistage Personality Inventory. The study analyzed a sample of 30 cocaine users and 26 users of various substances who asked for treatment at a specialized institution. Results show the same profile for both groups, with high 8-4-2 scales. According to the Multistage Personality Inventory, this profile corresponds to an antisocial personality disorder with depressive and schizoid traits. The fact that there is a single profile for different drug users leads us to the hypothesis that there are addictive personality characteristics rather than specific traits related to the use of each substance. These subjects' personality characteristics suggest that the fear to relate to others could make it very difficult to establish a therapeutic link. This, in addition to the acting up tendency seen among users, constitutes a call of alert in terms of their likely abandonment of treatment. Further more, as they take impulses into actions, they build a barrier before words. This could be called acting up, doing instead of saying, which can become an obstacle for the appropriate development of the therapeutic process. The result must consider the size of the sample.
On-board multicarrier demodulator for mobile applications using DSP implementation

NASA Astrophysics Data System (ADS)

Yim, W. H.; Kwan, C. C. D.; Coakley, F. P.; Evans, B. G.

1990-11-01

This paper describes the design and implementation of an on-board multicarrier demodulator using commercial digital signal processors. This is for use in a mobile satellite communication system employing an up-link SCPC/FDMA scheme. Channels are separated by a flexible multistage digital filter bank followed by a channel multiplexed digital demodulator array. The cross/dot product design approach of error detector leads to a new QPSK frequency control algorithm that allows fast acquisition without special preamble pattern. Timing correction is performed digitally using an extended stack of polyphase sub-filters.
Mars Sample Return Using Solar Sail Propulsion

NASA Technical Reports Server (NTRS)

Johnson, Les; Macdonald, Malcolm; Mcinnes, Colin; Percy, Tom

2012-01-01

Many Mars Sample Return (MSR) architecture studies have been conducted over the years. A key element of them is the Earth Return Stage (ERS) whose objective is to obtain the sample from the Mars Ascent Vehicle (MAV) and return it safely to the surface of the Earth. ERS designs predominantly use chemical propulsion [1], incurring a significant launch mass penalty due to the low specific impulse of such systems coupled with the launch mass sensitivity to returned mass. It is proposed to use solar sail propulsion for the ERS, providing a high (effective) specific impulse propulsion system in the final stage of the multi-stage system. By doing so to the launch mass of the orbiter mission can be significantly reduced and hence potentially decreasing mission cost. Further, solar sailing offers a unique set of non-Keplerian low thrust trajectories that may enable modifications to the current approach to designing the Earth Entry Vehicle by potentially reducing the Earth arrival velocity. This modification will further decrease the mass of the orbiter system. Solar sail propulsion uses sunlight to propel vehicles through space by reflecting solar photons from a large, mirror-like surface made of a lightweight, reflective material. The continuous photonic pressure provides propellantless thrust to conduct orbital maneuvering and plane changes more efficiently than conventional chemical propulsion. Because the Sun supplies the necessary propulsive energy, solar sails require no onboard propellant, thus reducing system mass. This technology is currently at TRL 7/8 as demonstrated by the 2010 flight of the Japanese Aerospace Exploration Agency, JAXA, IKAROS mission. [2
Trends in Physical Activity, Sedentary Behavior, Diet, and BMI Among US Adolescents, 2001–2009

PubMed Central

Wang, Jing

2013-01-01

OBJECTIVE: The high prevalence of adolescent obesity in the United States has been attributed to population changes in physical activity (PA), sedentary behaviors, and dietary behaviors. This study examines 8-year trends in these behaviors in US adolescents ages 11 to 16. METHODS: Nationally representative samples of US students in grades 6 to 10 were recruited during the 2001–2002 (N = 14 607), 2005–2006 (N = 9150), and 2009–2010 (N = 10 848) school years by using multistage stratified designs, with census regions and grades as strata, and school districts as the primary sampling units. African-American and Hispanic students were oversampled to obtain better estimates for those groups. Using the Health Behavior in School-aged Children quadrennial surveys, identical questions assessed BMI, PA, and sedentary and dietary behaviors at each school year. Logistic and linear regression analyses were conducted taking into account the sampling design and controlling for age, gender, race/ethnicity, and family affluence. RESULTS: Across the quadrennial surveys, significant increases were identified in number of days with at least 60 minutes of PA, daily consumption of fruits and vegetables, eating breakfast on weekdays and weekends, and BMI. Television viewing and consumption of sweets and sweetened beverages decreased across this same period. These same patterns were seen in all racial/ethnic groups. CONCLUSIONS: These patterns suggest that public health efforts to improve the obesity-related behaviors of US adolescents may be having some success. However, alternative explanations for the increase in BMI over the same period need to be considered. PMID:24043281
Multi-stage decoding for multi-level block modulation codes

NASA Technical Reports Server (NTRS)

Lin, Shu; Kasami, Tadao

1991-01-01

Various types of multistage decoding for multilevel block modulation codes, in which the decoding of a component code at each stage can be either soft decision or hard decision, maximum likelihood or bounded distance are discussed. Error performance for codes is analyzed for a memoryless additive channel based on various types of multi-stage decoding, and upper bounds on the probability of an incorrect decoding are derived. It was found that, if component codes of a multi-level modulation code and types of decoding at various stages are chosen properly, high spectral efficiency and large coding gain can be achieved with reduced decoding complexity. It was found that the difference in performance between the suboptimum multi-stage soft decision maximum likelihood decoding of a modulation code and the single stage optimum decoding of the overall code is very small, only a fraction of dB loss in SNR at the probability of an incorrect decoding for a block of 10(exp -6). Multi-stage decoding of multi-level modulation codes really offers a way to achieve the best of three worlds, bandwidth efficiency, coding gain, and decoding complexity.
Effect of multi-stage inoculation on the bacterial and fungal community structure during organic municipal solid wastes composting.

PubMed

Xi, Beidou; He, Xiaosong; Dang, Qiuling; Yang, Tianxue; Li, Mingxiao; Wang, Xiaowei; Li, Dan; Tang, Jun

2015-11-01

In this study, PCR-DGGE method was applied to investigate the impact of multi-stage inoculation treatment on the community composition of bacterial and fungal during municipal solid wastes (MSW) composting process. The results showed that the high temperature period was extended by the multi-stage inoculation treatment, 1day longer than initial-stage inoculation treatment, and 5days longer than non-inoculation treatment. The temperature of the secondary fermentation increased to 51°C with multi-stage inoculation treatment. The multi-stage inoculation method improved the community diversity of bacteria and fungi that the diversity indexes reached the maximum on the 17days and 20days respectively, avoided the competition between inoculations and indigenous microbes, and enhanced the growth of dominant microorganisms. The DNA sequence indicated that various kinds of uncultured microorganisms with determined ratios were detected, which were dominant microbes during the whole fermentation process. These findings call for further researches of compost microbial cultivation technology. Copyright © 2015 Elsevier Ltd. All rights reserved.
Bio-inspired approach to multistage image processing

NASA Astrophysics Data System (ADS)

Timchenko, Leonid I.; Pavlov, Sergii V.; Kokryatskaya, Natalia I.; Poplavska, Anna A.; Kobylyanska, Iryna M.; Burdenyuk, Iryna I.; Wójcik, Waldemar; Uvaysova, Svetlana; Orazbekov, Zhassulan; Kashaganova, Gulzhan

2017-08-01

Multistage integration of visual information in the brain allows people to respond quickly to most significant stimuli while preserving the ability to recognize small details in the image. Implementation of this principle in technical systems can lead to more efficient processing procedures. The multistage approach to image processing, described in this paper, comprises main types of cortical multistage convergence. One of these types occurs within each visual pathway and the other between the pathways. This approach maps input images into a flexible hierarchy which reflects the complexity of the image data. The procedures of temporal image decomposition and hierarchy formation are described in mathematical terms. The multistage system highlights spatial regularities, which are passed through a number of transformational levels to generate a coded representation of the image which encapsulates, in a computer manner, structure on different hierarchical levels in the image. At each processing stage a single output result is computed to allow a very quick response from the system. The result is represented as an activity pattern, which can be compared with previously computed patterns on the basis of the closest match.
Mouse allergen exposure and decreased risk of allergic rhinitis in school-aged children.

PubMed

Jacobs, Tammy S; Forno, Erick; Brehm, John M; Acosta-Pérez, Edna; Han, Yueh-Ying; Blatter, Joshua; Thorne, Peter; Metwali, Nervana; Colón-Semidey, Angel; Alvarez, María; Canino, Glorisa; Celedón, Juan C

2014-12-01

Little is known about exposure to mouse allergen (Mus m 1) and allergic rhinitis (AR). To evaluate the association between mouse allergen exposure and AR in children. We examined the relation between mouse allergen level in house dust and AR in 511 children aged 6 to 14 years in San Juan, Puerto Rico. Study participants were chosen from randomly selected households using a multistage probability sample design. The study protocol included questionnaires, allergy skin testing, and collection of blood and dust samples. AR was defined as current rhinitis symptoms and skin test reactivity to at least one allergen. In the multivariate analyses, mouse allergen level was associated with a 25% decreased odds of AR in participating children (95% confidence interval, 0.62-0.92). Although endotoxin and mouse allergen levels were significantly correlated (r = 0.184, P < .001), the observed inverse association between Mus m 1 and AR was not explained by levels of endotoxin or other markers of microbial or fungal exposure (peptidoglycan and glucan). Mouse allergen exposure is associated with decreased odds of AR in Puerto Rican school-aged children. Copyright © 2014 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.
Migration and depressive symptoms in migrant-sending areas: findings from the survey of internal migration and health in China.

PubMed

Lu, Yao; Hu, Peifeng; Treiman, Donald J

2012-08-01

China has experienced large-scale internal migration and growing mental health disorders. Limited research has examined the relationship between the two processes. We examined the association between labor out-migration and depressive symptoms of family members left behind in migrant-sending areas. We conducted a multistage probability sample survey of Chinese adults in 2008 ("Internal Migration and Health in China"), including 787 people in rural migrant-sending areas. To study whether adults in out-migrant households were more likely to experience depressive symptoms (CES-D) than were adults in non-migrant households, we used multivariate regressions and adjusted for a wide range of confounding factors and for the complex sampling design. Adults in households with labor out-migrants were more likely to report depressive symptoms than those in households without out-migrants, presumably a result of the absence of family members. However, monetary remittances from labor migrants buffered the mental health costs of out-migration. Labor out-migration has important consequences for the mental health in migrant-sending communities. There is an urgent need to address the psychological costs of migration and to promote regular remittances.
Identifying children with Special Health Care Needs in Alexandria, Egypt.

PubMed

Wahdan, Iman H; El-Nimr, Nessrin A

2018-05-23

In developing countries, obtaining reliable prevalence rates for children with special health care needs (CSHCN) is challenging. One of the tools used to identify CSHCN is the CSHCN Screener (not available in Arabic). The aim is to test the feasibility of using an Arabic version of CSHCN screener in identifying CSHCN in the Egyptian setup and to estimate their prevalence in Alexandria. A community-based survey was conducted among a representative sample of children using a multistage cluster sampling technique. A pre-designed interviewing questionnaire and the Arabic translation of CSHCN screener were used. The prevalence of CSHCN was 12.2% and 91.8% of them had the three domains of health care needs. The most prevalent conditions requiring special health care were sensory and cognitive impairments and impaired mobility. Type of family was the only significant factor associated with special health care needs. It is concluded that the screener can easily be used and help in identifying the majority of children that need to be the focus of the National health care services. It is recommended that the school health services add the screener to assist depicting the existing gaps in the health care system.
The Indian Council of Medical Research–India Diabetes (ICMR–INDIAB) Study: Methodological Details

PubMed Central

Anjana, Ranjit Mohan; Pradeepa, Rajendra; Deepa, Mohan; Datta, Manjula; Sudha, Vasudevan; Unnikrishnan, Ranjit; Nath, Lalith M; Das, Ashok Kumar; Madhu, Sri Venkata; Rao, Paturi Vishnupriya; Shukla, Deepak Kumar; Kaur, Tanvir; Ali, Mohammed K; Mohan, Viswanathan

2011-01-01

Background Currently available estimates of diabetes prevalence in India are based on published data derived from very few studies. The Indian Council of Medical Research–India Diabetes (ICMR–INDIAB) study is a community-based survey conceived with the aim of obtaining the prevalence rates of diabetes in India as a whole, covering all 28 states, the National Capital Territory of Delhi, and two of the union territories in the mainland of India, with a total sample size of 124,000 individuals. Methods A stratified multistage sampling design has been used. In all study subjects, a structured questionnaire was administered and anthropometric parameters and blood pressure were measured. Fasting capillary blood glucose was first determined using a glucose meter. An oral glucose load was then administered to all subjects except those with self-reported diabetes, and the 2 h post-load capillary blood glucose was estimated. In every fifth subject, a fasting venous sample was collected for measurement of lipids and creatinine, a resting 12-lead electrocardiogram was performed, and dietary assessment questionnaire was administered. In all diabetic subjects, an additional diabetes questionnaire was used and a fasting venous sample drawn for glycated hemoglobin. Results All biological samples collected were analyzed in a central laboratory. All data collected were stored electronically. Quality control was achieved through multiple tiers of checks. Conclusions The ICMR–INDIAB study is the first of its kind attempting to provide accurate and comprehensive state- and national-level data on diabetes prevalence in India. PMID:21880233

Final design report of a personnel launch system and a family of heavy lift launch vehicles

NASA Technical Reports Server (NTRS)

Tupa, James; Merritt, Debbie; Riha, David; Burton, Lee; Kubinski, Russell; Drake, Kerry; Mann, Darrin; Turner, Ken

1991-01-01

The objective was to design both a Personnel Launch System (PLS) and a family of Heavy Lift Launch Vehicles (FHLLVs) that provide low cost and efficient operation in missions not suited for the Shuttle. The PLS vehicle is designed primarily for space station crew rotation and emergency crew return. The final design of the PLS vehicle and its interior is given. The mission of the FHLLVs is to place large, massive payloads into Earth orbit with payload flexibility being considered foremost in the design. The final design of three launch vehicles was found to yield a payload capacity range from 20 to 200 mt. These designs include the use of multistaged, high thrust liquid engines mounted on the core stages of the rocket.
Multiobjective Optimization of Rocket Engine Pumps Using Evolutionary Algorithm

NASA Technical Reports Server (NTRS)

Oyama, Akira; Liou, Meng-Sing

2001-01-01

A design optimization method for turbopumps of cryogenic rocket engines has been developed. Multiobjective Evolutionary Algorithm (MOEA) is used for multiobjective pump design optimizations. Performances of design candidates are evaluated by using the meanline pump flow modeling method based on the Euler turbine equation coupled with empirical correlations for rotor efficiency. To demonstrate the feasibility of the present approach, a single stage centrifugal pump design and multistage pump design optimizations are presented. In both cases, the present method obtains very reasonable Pareto-optimal solutions that include some designs outperforming the original design in total head while reducing input power by one percent. Detailed observation of the design results also reveals some important design criteria for turbopumps in cryogenic rocket engines. These results demonstrate the feasibility of the EA-based design optimization method in this field.
A 200 Watt Traveling Wave-Tube for the Communications Technology Satellite

NASA Technical Reports Server (NTRS)

Jones, C. L.

1976-01-01

This final report presents the results of the design, development, and test of experimental and production units of a PPM focused traveling wave tube (L-5394) that produces 225 watts of CW RF power over 85 MHz centered at 12.080 GHz. The tube uses a coupled cavity RF circuit with a velocity taper for greater than 26 percent basic efficiency. Overall efficiency of 50 percent is achieved by the incorporation of a multistage depressed collector designed at NASA Lewis Research Center. The collector is cooled by direct radiation to deep space. The tube was designed to be used for broadcasting power transmission from a satellite.
Subband Image Coding with Jointly Optimized Quantizers

NASA Technical Reports Server (NTRS)

Kossentini, Faouzi; Chung, Wilson C.; Smith Mark J. T.

1995-01-01

An iterative design algorithm for the joint design of complexity- and entropy-constrained subband quantizers and associated entropy coders is proposed. Unlike conventional subband design algorithms, the proposed algorithm does not require the use of various bit allocation algorithms. Multistage residual quantizers are employed here because they provide greater control of the complexity-performance tradeoffs, and also because they allow efficient and effective high-order statistical modeling. The resulting subband coder exploits statistical dependencies within subbands, across subbands, and across stages, mainly through complexity-constrained high-order entropy coding. Experimental results demonstrate that the complexity-rate-distortion performance of the new subband coder is exceptional.
STGSTK: A computer code for predicting multistage axial flow compressor performance by a meanline stage stacking method

NASA Technical Reports Server (NTRS)

Steinke, R. J.

1982-01-01

A FORTRAN computer code is presented for off-design performance prediction of axial-flow compressors. Stage and compressor performance is obtained by a stage-stacking method that uses representative velocity diagrams at rotor inlet and outlet meanline radii. The code has options for: (1) direct user input or calculation of nondimensional stage characteristics; (2) adjustment of stage characteristics for off-design speed and blade setting angle; (3) adjustment of rotor deviation angle for off-design conditions; and (4) SI or U.S. customary units. Correlations from experimental data are used to model real flow conditions. Calculations are compared with experimental data.
Preliminary design study of advanced multistage axial flow core compressors

NASA Technical Reports Server (NTRS)

Wisler, D. C.; Koch, C. C.; Smith, L. H., Jr.

1977-01-01

A preliminary design study was conducted to identify an advanced core compressor for use in new high-bypass-ratio turbofan engines to be introduced into commercial service in the 1980's. An evaluation of anticipated compressor and related component 1985 state-of-the-art technology was conducted. A parametric screening study covering a large number of compressor designs was conducted to determine the influence of the major compressor design features on efficiency, weight, cost, blade life, aircraft direct operating cost, and fuel usage. The trends observed in the parametric screening study were used to develop three high-efficiency, high-economic-payoff compressor designs. These three compressors were studied in greater detail to better evaluate their aerodynamic and mechanical feasibility.
Risk Factors for Upper Extremity Musculoskeletal Disorders Among Office Workers in Qom Province, Iran.

PubMed

Alavi, Seyedeh Shohreh; Abbasi, Mahya; Mehrdad, Ramin

2016-10-01

The identification of the risk factors for musculoskeletal disorders (MSDs) is the first step in designing effective preventive interventions. To investigate the association between individual, organizational, physical, and psychological factors and upper extremity MSDs (i.e., shoulder, elbow and hand/wrist). In this cross-sectional study, the study population was comprised of office workers from Qom Province, Iran. Of the 1630 Iranian office workers who were selected via a random multistage cluster sampling method, 1488 completed a comprehensive data collection form designed to investigate the individual, organizational, physical, and psychological factors related to MSDs (response rate: 91.3%). The predictors of shoulder MSDs in the past 12 months were uncomfortable sitting posture (β = 0.42, P = 0.04), limited rest breaks (β=0.73, P = 0.012), and no access to adjustable desks (β = 0.43, P = 0.018). Working on a computer for more than five hours (β = 0.61, P = 0.004) and an uncomfortable sitting posture (β = 0.79, P = 0.001) predicted hand/wrist symptoms. Various risk factors in the workplace may contribute to MSDs in different upper extremities. Preventive interventions should hence include ergonomic and office equipment modifications.
Configuration of management accounting information system for multi-stage manufacturing

NASA Astrophysics Data System (ADS)

Mkrtychev, S. V.; Ochepovsky, A. V.; Enik, O. A.

2018-05-01

The article presents an approach to configuration of a management accounting information system (MAIS) that provides automated calculations and the registration of normative production losses in multi-stage manufacturing. The use of MAIS with the proposed configuration at the enterprises of textile and woodworking industries made it possible to increase the accuracy of calculations for normative production losses and to organize accounting thereof with the reference to individual stages of the technological process. Thus, high efficiency of multi-stage manufacturing control is achieved.
Multi-megavolt low jitter multistage switch

DOEpatents

Humphreys, D.R.; Penn, K.J. Jr.

1985-06-19

It is one object of the present invention to provide a multistage switch capable of holding off numerous megavolts, until triggered, from a particle beam accelerator of the type used for inertial confinement fusion. The invention provides a multistage switch having low timing jitter and capable of producing multiple spark channels for spreading current over a wider area to reduce electrode damage and increase switch lifetime. The switch has fairly uniform electric fields and a short spark gap for laser triggering and is engineered to prevent insulator breakdowns.
Functioning efficiency of intermediate coolers of multistage steam-jet ejectors of steam turbines

NASA Astrophysics Data System (ADS)

Aronson, K. E.; Ryabchikov, A. Yu.; Brodov, Yu. M.; Zhelonkin, N. V.; Murmanskii, I. B.

2017-03-01

Designs of various types of intermediate coolers of multistage ejectors are analyzed and thermal effectiveness and gas-dynamic resistance of coolers are estimated. Data on quantity of steam condensed from steam-air mixture in stage I of an ejector cooler was obtained on the basis of experimental results. It is established that the amount of steam condensed in the cooler constitutes 0.6-0.7 and is almost independent of operating steam pressure (and, consequently, of steam flow) and air amount in steam-air mixture. It is suggested to estimate the amount of condensed steam in a cooler of stage I based on comparison of computed and experimental characteristics of stage II. Computation taking this hypothesis for main types of mass produced multistage ejectors into account shows that 0.60-0.85 of steam amount should be condensed in stage I of the cooler. For ejectors with "pipe-in-pipe" type coolers (EPO-3-200) and helical coolers (EO-30), amount of condensed steam may reach 0.93-0.98. Estimation of gas-dynamic resistance of coolers shows that resistance from steam side in coolers with built-in and remote pipe bundle constitutes 100-300 Pa. Gas-dynamic resistance of "pipein- pipe" and helical type coolers is significantly higher (3-6 times) compared with pipe bundle. However, performance by "dry" (atmospheric) air is higher for ejectors with relatively high gas-dynamic resistance of coolers than those with low resistance at approximately equal operating flow values of ejectors.
The importance of structural softening for the evolution and architecture of passive margins

PubMed Central

Duretz, T.; Petri, B.; Mohn, G.; Schmalholz, S. M.; Schenker, F. L.; Müntener, O.

2016-01-01

Lithospheric extension can generate passive margins that bound oceans worldwide. Detailed geological and geophysical studies in present and fossil passive margins have highlighted the complexity of their architecture and their multi-stage deformation history. Previous modeling studies have shown the significant impact of coarse mechanical layering of the lithosphere (2 to 4 layer crust and mantle) on passive margin formation. We built upon these studies and design high-resolution (~100–300 m) thermo-mechanical numerical models that incorporate finer mechanical layering (kilometer scale) mimicking tectonically inherited heterogeneities. During lithospheric extension a variety of extensional structures arises naturally due to (1) structural softening caused by necking of mechanically strong layers and (2) the establishment of a network of weak layers across the deforming multi-layered lithosphere. We argue that structural softening in a multi-layered lithosphere is the main cause for the observed multi-stage evolution and architecture of magma-poor passive margins. PMID:27929057
Impedance-matched Marx generators

NASA Astrophysics Data System (ADS)

Stygar, W. A.; LeChien, K. R.; Mazarakis, M. G.; Savage, M. E.; Stoltzfus, B. S.; Austin, K. N.; Breden, E. W.; Cuneo, M. E.; Hutsel, B. T.; Lewis, S. A.; McKee, G. R.; Moore, J. K.; Mulville, T. D.; Muron, D. J.; Reisman, D. B.; Sceiford, M. E.; Wisher, M. L.

2017-04-01

We have conceived a new class of prime-power sources for pulsed-power accelerators: impedance-matched Marx generators (IMGs). The fundamental building block of an IMG is a brick, which consists of two capacitors connected electrically in series with a single switch. An IMG comprises a single stage or several stages distributed axially and connected in series. Each stage is powered by a single brick or several bricks distributed azimuthally within the stage and connected in parallel. The stages of a multistage IMG drive an impedance-matched coaxial transmission line with a conical center conductor. When the stages are triggered sequentially to launch a coherent traveling wave along the coaxial line, the IMG achieves electromagnetic-power amplification by triggered emission of radiation. Hence a multistage IMG is a pulsed-power analogue of a laser. To illustrate the IMG approach to prime power, we have developed conceptual designs of two ten-stage IMGs with L C time constants on the order of 100 ns. One design includes 20 bricks per stage, and delivers a peak electrical power of 1.05 TW to a matched-impedance 1.22 -Ω load. The design generates 113 kV per stage and has a maximum energy efficiency of 89%. The other design includes a single brick per stage, delivers 68 GW to a matched-impedance 19 -Ω load, generates 113 kV per stage, and has a maximum energy efficiency of 90%. For a given electrical-power-output time history, an IMG is less expensive and slightly more efficient than a linear transformer driver, since an IMG does not use ferromagnetic cores.
Achieving Integration in Mixed Methods Designs—Principles and Practices

PubMed Central

Fetters, Michael D; Curry, Leslie A; Creswell, John W

2013-01-01

Mixed methods research offers powerful tools for investigating complex processes and systems in health and health care. This article describes integration principles and practices at three levels in mixed methods research and provides illustrative examples. Integration at the study design level occurs through three basic mixed method designs—exploratory sequential, explanatory sequential, and convergent—and through four advanced frameworks—multistage, intervention, case study, and participatory. Integration at the methods level occurs through four approaches. In connecting, one database links to the other through sampling. With building, one database informs the data collection approach of the other. When merging, the two databases are brought together for analysis. With embedding, data collection and analysis link at multiple points. Integration at the interpretation and reporting level occurs through narrative, data transformation, and joint display. The fit of integration describes the extent the qualitative and quantitative findings cohere. Understanding these principles and practices of integration can help health services researchers leverage the strengths of mixed methods. PMID:24279835
Factors Associated with Depression Among Mexican Americans Living in U.S.-Mexico Border and Non-Border Areas.

PubMed

Vaeth, Patrice A C; Caetano, Raul; Mills, Britain A

2016-08-01

Factors associated with CES-D depression among Mexican Americans living on and off the U.S.-Mexico border are examined. Data are from two studies of Mexican American adults. The Border Survey conducted face-to-face interviews in urban U.S.-Mexico border counties of California, Arizona, New Mexico, and Texas (N = 1307). The non-border HABLAS survey conducted face-to-face interviews in Houston, Los Angeles, New York, Philadelphia, and Miami (N = 1288). Both surveys used a multistage cluster sample design with response rates of 67 and 76 %, respectively. The multivariate analysis showed that border residence and higher perceived neighborhood collective efficacy were protective for depression among men. Among men, lower education, unemployment, increased weekly drinking, and poor health status were associated with depression. Among women, alcohol-related problems and poorer health status were also associated with depression. Further examinations of how neighborhood perceptions vary by gender and how these perceptions influence the likelihood of depression are warranted.
Influence of family size, household food security status, and child care practices on the nutritional status of under-five children in Ile-Ife, Nigeria.

PubMed

Ajao, K O; Ojofeitimi, E O; Adebayo, A A; Fatusi, A O; Afolabi, O T

2010-12-01

Fertility pattern and reproductive behaviours affect infant death in Nigeria. Household food insecurity and poor care practices also place children at risk of morbidity and mortality. The objectives of this study were to assess the influence of family size, household food security status, and child care practices on the nutritional status of under-five children in Ile-Ife, Nigeria. The study employed a descriptive cross-sectional design. A semi-structured questionnaire was used to collect data from 423 mothers of under-five children and their children in the households selected through multistage sampling methods. Food-insecure households were five times more likely than secure households to have wasted children (crude OR = 5.707, 95 percent CI = 1.31-24.85). Children with less educated mothers were significantly more likely to be stunted. The prevalence of food insecurity among households in Ile-Ife was high. Households with food insecurity and less educated mothers were more likely to have malnourished children.
Driving under the influence of alcohol in Cali, Colombia: prevalence and consumption patterns, 2013.

PubMed

Bonilla-Escobar, Francisco J; Herrera-López, Martha L; Ortega-Lenis, Delia; Medina-Murillo, Jhon J; Fandiño-Losada, Andrés; Jaramillo-Molina, Ciro; Naranjo-Lujan, Salome; Izquierdo, Edda P; Vanlaar, Ward; Gutiérrez-Martínez, María I

2016-01-01

This study's goal was to establish the prevalence of driving under the influence of alcohol (DUI) and alcohol consumption patterns among drivers in Cali, Colombia, in 2013. A cross-sectional study based on a roadside survey using a stratified and multi-stage sampling design was developed. Thirty-two sites were chosen randomly for the selection of drivers who were then tested for blood alcohol concentration (BAC) and asked to participate in the survey. The prevalence of DUI was 0.88% (95% confidence intervals [95% CI] 0.26%-1.49%) with a lower prevalence when BAC was increasing. In addition, a higher prevalence was found during non-typical checkpoint hours (1.28, 95% CI -0.001%-0.03%). The overall prevalence is considered high, given the low alcohol consumption and vehicles per capita. Prevention measures are needed to reduce DUI during non-typical checkpoints and ongoing studies are required to monitor the trends and enable the assessment of interventions.
Predictors of handgrip strength among adults of a rural community in Malaysia.

PubMed

Moy, Foong-Ming; Darus, Azlan; Hairi, Noran Naqiah

2015-03-01

Handgrip strength is useful for screening the nutritional status of adult population as it is strongly associated with physical disabilities and mortality. Therefore, we aimed to determine the predictors of handgrip strength among adults of a rural community in Malaysia using a cross-sectional study design with multistage sampling. All adults aged 30 years and older from 1250 households were invited to our study. Structured questionnaire on sociodemographic characteristics, medical history, occupation history, lifestyle practices, and measurements, including anthropometry and handgrip strength were taken. There were 2199 respondents with 55.2% females and majority were of Malay ethnicity. Their mean (standard deviation) age was 53.4 (13.2) years. The response rate for handgrip strength was 94.2%. Females had significantly lower handgrip strength than males (P < .05). In the multiple linear regression models, significant predictors of handgrip strength for males were age, height, job groups, and diabetes, while for females, the significant predictors were age, weight, height, and diabetes. © 2013 APJPH.
Mental health status among married working women residing in Bhubaneswar city, India: a psychosocial survey.

PubMed

Panigrahi, Ansuman; Padhy, Aditya Prasad; Panigrahi, Madhulita

2014-01-01

Mental health is a major public health concern worldwide. This study aimed to assess the mental health status and its correlates among married working women residing in Bhubaneswar city of Odisha, India. A cross-sectional study was undertaken in 240 households involving 240 married working women following a multistage cluster random sampling design. Using the predesigned, pretested interview schedule and self-reporting questionnaire, all relevant information was collected. Our study revealed that 32.9% of study respondents had poor mental health and only about 10% of these women had sought any kind of mental health services. Logistic regression analysis showed that 3 predictors such as favourable attitude of colleagues, sharing their own problems with husband, and spending time for yoga/meditation/exercise had significant positive impact on the mental health status of married working women. A preventive program regarding various aspects of mental health for married working women at workplace as well as community level could be a useful strategy in reducing this public health problem.
Patterns of smoking among adolescents in Malaysia and Thailand: Findings from the International Tobacco Control Southeast Asia Survey

PubMed Central

Hammond, David; Kin, Foong; Prohmmo, Arre; Kungskulniti, Nipapun; Lian, Tan Y.; Sharma, Sharad K.; Sirirassamee, Buppha; Borland, Ron; Fong, Geoffrey T.

2015-01-01

At present, 70% of the world’s 1.1 billion smokers are in developing countries, with over 50% in Asia alone. The current study examined patterns of youth smoking in Thailand and Malaysia. Respondents were 2002 youths between the ages of 13 and 17 from Thailand (n = 1000) and Malaysia (n = 1002). Respondents were selected using a multistage cluster sampling design and surveyed between January 2005 and March 2005. Approximately 3% of youth between the ages of 13 and 17 were current smokers, with an additional 10% to 12% reporting experimental smoking. Males were between 7 and 15 times more likely to report smoking behavior than females. Less than 1% of females respondents in either country met the criteria for current smoking, and less than 5% met the criteria for experimental smoking. In contrast, more than 50% Thai males and approximately one- third of Malaysian males aged 17 met the criteria for either experimental or current smoking. PMID:19124313
Methodology for Variable Fidelity Multistage Optimization under Uncertainty

DTIC Science & Technology

2011-03-31

problem selected for the application of the new optimization methodology is a Single Stage To Orbit ( SSTO ) expendable launch vehicle (ELV). Three...the primary exercise of the variable fidelity optimization portion of the code. SSTO vehicles have been discussed almost exclusively in the context...of reusable launch vehicles (RLV). There is very little discussion in recent literature of SSTO designs which are expendable. In the light of the

Controllability in Multi-Stage Laser Ion Acceleration

NASA Astrophysics Data System (ADS)

Kawata, S.; Kamiyama, D.; Ohtake, Y.; Barada, D.; Ma, Y. Y.; Kong, Q.; Wang, P. X.; Gu, Y. J.; Li, X. F.; Yu, Q.

2015-11-01

The present paper shows a concept for a future laser ion accelerator, which should have an ion source, ion collimators, ion beam bunchers and ion post acceleration devices. Based on the laser ion accelerator components, the ion particle energy and the ion energy spectrum are controlled, and a future compact laser ion accelerator would be designed for ion cancer therapy or for ion material treatment. In this study each component is designed to control the ion beam quality. The energy efficiency from the laser to ions is improved by using a solid target with a fine sub-wavelength structure or a near-critical density gas plasma. The ion beam collimation is performed by holes behind the solid target or a multi-layered solid target. The control of the ion energy spectrum and the ion particle energy, and the ion beam bunching are successfully realized by a multi-stage laser-target interaction. A combination of each component provides a high controllability of the ion beam quality to meet variable requirements in various purposes in the laser ion accelerator. The work was partly supported by MEXT, JSPS, ASHULA project/ ILE, Osaka University, CORE (Center for Optical Research and Education, Utsunomiya University, Japan), Fudan University and CDI (Creative Dept. for Innovation) in CCRD, Utsunomiya University.
Efficiency enhancement of octave-bandwidth traveling wave tubes by use of multistage depressed collectors

NASA Technical Reports Server (NTRS)

Ramins, P.; Fox, T. A.

1979-01-01

Small, three- and five-stage depressed collectors were evaluated in conjunction with a 4.8- to 9.6-GHz TWT of 325- to 675-W power output and a beam of 0.5 microperv. The multistage depressed collector (MDC) performed well even though its design had been optimized for a TWT of identical design but considerably less output power. Despite large, fixed losses significant efficiency enhancement was demonstrated with both the three- and five-stage depressed collectors. At saturated rf power output, the improvement in the overall efficiency ranged from a factor of 2.5 to 3.0 for the three-stage collector and a factor of 3.0 to 3.5 for the five-stage collector. At saturation three-stage collector efficiencies of 77 to 80 percent and five-stage collector efficiencies of 81 to 84 percent were obtained across the frequency band. An overall efficiency of 37.0 to 44.3 percent across the frequency band of 4.8 to 9.6 GHz was demonstrated with the use of harmonic injection. For operation below saturation, even larger relative improvements in the overall TWT efficiency were demonstrated. Collector performance was relatively insensitive to the degree of regulation of the collector power supply.
Adaptation of Decoy Fusion Strategy for Existing Multi-Stage Search Workflows

NASA Astrophysics Data System (ADS)

Ivanov, Mark V.; Levitsky, Lev I.; Gorshkov, Mikhail V.

2016-09-01

A number of proteomic database search engines implement multi-stage strategies aiming at increasing the sensitivity of proteome analysis. These approaches often employ a subset of the original database for the secondary stage of analysis. However, if target-decoy approach (TDA) is used for false discovery rate (FDR) estimation, the multi-stage strategies may violate the underlying assumption of TDA that false matches are distributed uniformly across the target and decoy databases. This violation occurs if the numbers of target and decoy proteins selected for the second search are not equal. Here, we propose a method of decoy database generation based on the previously reported decoy fusion strategy. This method allows unbiased TDA-based FDR estimation in multi-stage searches and can be easily integrated into existing workflows utilizing popular search engines and post-search algorithms.
Binge drinking as a risk factor for violence among secondary school students in a nationally representative sample in Puerto Rico.

PubMed

Reyes-Pulliza, Juan Carlos; Rodríguez-Figueroa, Linnette; Moscoso-Álvarez, Margarita R; Colón, Héctor; Cotto-Negrón, Coral; Rivera, Laura; Irizarry-Pérez, Marisela

2015-03-01

The objective of this study was to determine the association between binge drinking and violence in a representative sample of secondary-school students in Puerto Rico. Consulta Juvenil VII (a biennial survey of school-aged youths in Puerto Rico) has a representative sample of adolescent students in Puerto Rico. A multi-stage stratified cluster sampling design was used. The sampling frame of Consulta Juvenil VII includes all the public and private schools registered with the Department of Education and the Council of General Education in Puerto Rico. The study utilizes a self-administered questionnaire that was translated and adapted from the "Student Survey of Risk and Protective Factors and Prevalence of Alcohol, Tobacco, and Other Drug Use". "Binge drinking" was defined as having 5 or more alcoholic drinks in a row during the 30 days preceding the survey. Almost 20% of the sample members reported that at least 1 instance of binge drinking had taken place during the 2 weeks prior to the survey (17.7%). After controlling for gender, age, school level, the type of system, and the parents' educational levels, the odds of a given binge drinker reporting violent behaviors were 5 times greater than the odds among non-binge drinkers (OR: 5.6; 95% CI: 4.7-6.7). The study shows an association between binge drinking and violence in Puerto Rican adolescents, indicating that Hispanic youths who abuse alcohol may be at increased risk of violence. These findings suggest that violence prevention programs should be integrated with substance use prevention programs. [PR Health
Patient safety culture and job stress among nurses in Mazandaran, Iran.

PubMed

Asefzadeh, Saeed; Kalhor, Rohollah; Tir, Mohammad

2017-12-01

Paying attention to patient safety is a basic right and a necessary issue in providing medical care, and failure to observe it leads to irreparable damage. One of the factors affecting an individuals' performance in an organization is stress, which also endangers their health. To determine the relationship between patient safety culture and levels of job stress among the nurses working in the hospitals affiliated with Mazandaran University of Medical Sciences. The present study was carried out using a cross-sectional method in the hospitals affiliated with Mazandaran University of Medical Sciences in 2016. A multistage stratified sampling method using a Morgan Table was employed to select 380 nurses as the study sample from among 3,180 nurses. They were selected by a multistage stratified sampling method. The study instruments were Stinemetz Standard Job Stress Questionnaire and Hospital Survey on Patient Safety Culture (HSOPSC). After the required data were collected, they were analyzed using descriptive and inferential statistical methods (Pearson correlation, independent-samples t-test, and ANOVA) through SPSS version 23. The results of the present study showed that 75% of the nurses experienced average and high levels of stress. Among different dimensions of safety culture, organizational learning and handoffs and transitions obtained the highest and the lowest scores, respectively (72.5 and 24.5). The mean score of safety culture dimensions was 51.52. The results of the Pearson correlation test showed that there was a direct significant relationship between different dimensions of safety culture among nurses and the level of stress (p≤0.05). According to the findings, patient safety should be considered as a strategic priority for the senior managers of the health system. In order to enhance patient safety, managers should pay special attention to evaluating safety culture in organizations that deliver health service, especially hospitals.
Comorbid Visual and Psychiatric Disabilities Among the Chinese Elderly: A National Population-Based Survey.

PubMed

Guo, Chao; Wang, Zhenjie; Li, Ning; Chen, Gong; Zheng, Xiaoying

2017-12-01

To estimate the prevalence of, and association between, co-morbid visual and psychiatric disabilities among elderly (>65 years-of-age) persons in China. Random representative samples were obtained using multistage, stratified, cluster sampling, with probabilities proportional to size. Standard weighting procedures were used to construct sample weights that reflected this multistage, stratified cluster sampling survey scheme. Logistic regression models were used to elucidate associations between visual and psychiatric disabilities. Among the Chinese elderly, >160,000 persons have co-morbid visual and psychiatric disabilities. The weighted prevalence among this cohort is 123.7 per 100,000 persons. A higher prevalence of co-morbid visual and psychiatric disabilities was found in the oldest-old (p<0.001); women (65-79 years-of-age, p=0.001; ≥80 years-of-age, p=0.004); illiterate (65-79 years-of-age, p<0.001; ≥80 years-of-age, p=0.02); and single elders (65-79 years-of-age, p=0.01; ≥80 years-of-age, p=0.001). Presence of a visual disability was significantly associated with a higher risk of having a psychiatric disability among persons aged ≥80 years-of-age [adjusted odds ratio, 1.24; 95% confidence interval (CI), 1.03-1.54]. A significant number of Chinese elderly persons were living with co-morbid visual and psychiatric disabilities. To address the challenge of these co-morbid disorders among Chinese elders, it is incumbent upon the government to implement additional and more comprehensive prevention and rehabilitation strategies for health-care systems, reinforce health promotion among the elderly, and improve accessibility to health-care services.
Changes in Cartilage Biomarker Levels During a Transcontinental Multistage Footrace Over 4486 km.

PubMed

Mündermann, Annegret; Klenk, Christopher; Billich, Christian; Nüesch, Corina; Pagenstert, Geert; Schmidt-Trucksäss, Arno; Schütz, Uwe

2017-09-01

Cartilage turnover and load-induced tissue changes are frequently assessed by quantifying concentrations of cartilage biomarkers in serum. To date, information on the effects of ultramarathon running on articular cartilage is scarce. Serum concentrations of cartilage oligomeric matrix protein (COMP), matrix metalloproteinase (MMP)-1, MMP-3, MMP-9, COL2-3/4C long mono (C2C), procollagen type II C-terminal propeptide (CPII), and C2C:CPII will increase throughout a multistage ultramarathon. Descriptive laboratory study. Blood samples were collected from 36 runners (4 female; mean age, 49.0 ± 10.7 years; mean body mass index, 23.1 ± 2.3 kg/m 2 [start] and 21.4 ± 1.9 kg/m 2 [finish]) before (t 0 ) and during (t 1 : 1002 km; t 2 : 2132 km; t 3 : 3234 km; t 4 : 4039 km) a 4486-km multistage ultramarathon. Serum COMP, MMP-1, MMP-3, MMP-9, C2C, and CPII levels were assessed using commercial enzyme-linked immunosorbent assays. Linear mixed models were used to detect significant changes in serum biomarker levels over time with the time-varying covariates of body weight, running speed, and daily running time. Serum concentrations of COMP, MMP-9, and MMP-3 changed significantly throughout the multistage ultramarathon. On average, concentrations increased during the first measurement interval (MI1: t 1 -t 0 ) by 22.5% for COMP (95% CI, 0.29-0.71 ng/mL), 22.3% for MMP-3 (95% CI, 0.24-15.37 ng/mL), and 95.6% for MMP-9 (95% CI, 81.7-414.5 ng/mL) and remained stable throughout MI2, MI3, and MI4. Serum concentrations of MMP-1, C2C, CPII, and C2C:CPII did not change significantly throughout the multistage ultramarathon. Changes in MMP-3 were statistically associated with changes in COMP throughout the ultramarathon race (MMP-3: Wald Z = 3.476, P = .001). Elevated COMP levels indicate increased COMP turnover in response to extreme running, and the association between load-induced changes in MMP-3 and changes in COMP suggests the possibility that MMP-3 may be involved in the degradation of COMP. These results suggest that articular cartilage is able to adapt even to extreme physical activity, possibly explaining why the risk of degenerative joint disease is not elevated in the running population.
Multi-stage versus single-stage inflation and deflation cycle for alternating low pressure air mattresses to prevent pressure ulcers in hospitalised patients: a randomised-controlled clinical trial.

PubMed

Demarré, L; Beeckman, D; Vanderwee, K; Defloor, T; Grypdonck, M; Verhaeghe, S

2012-04-01

The duration and the amount of pressure and shear must be reduced in order to minimize the risk of pressure ulcer development. Alternating low pressure air mattresses with multi-stage inflation and deflation cycle of the air cells have been developed to relieve pressure by sequentially inflating and deflating the air cells. Evidence about the effectiveness of this type of mattress in clinical practice is lacking. This study aimed to compare the effectiveness of an alternating low pressure air mattress that has a standard single-stage inflation and deflation cycle of the air cells with an alternating low pressure air mattress with multi-stage inflation and deflation cycle of the air cells. A randomised controlled trial was performed in a convenience sample of 25 wards in five hospitals in Belgium. In total, 610 patients were included and randomly assigned to the experimental group (n=298) or the control group (n=312). In the experimental group, patients were allocated to an alternating low pressure air mattress with multi-stage inflation and deflation cycle of the air cells. In the control group, patients were allocated to an alternating low pressure air mattress with a standard single-stage inflation and deflation cycle of the air cells. The outcome was defined as cumulative pressure ulcer incidence (Grade II-IV). An intention-to-treat analysis was performed. There was no significant difference in cumulative pressure ulcer incidence (Grade II-IV) between both groups (Exp.=5.7%, Contr.=5.8%, p=0.97). When patients developed a pressure ulcer, the median time was 5.0 days in the experimental group (IQR=3.0-8.5) and 8.0 days in the control group (IQR=3.0-8.5) (Mann-Whitney U-test=113, p=0.182). The probability to remain pressure ulcer free during the observation period in this trial did not differ significantly between the experimental group and the control group (log-rank χ(2)=0.013, df=1, p=0.911). An alternating low pressure air mattress with multi-stage inflation and deflation of the air cells does not result in a significantly lower pressure ulcer incidence compared to an alternating low pressure air mattress with a standard single-stage inflation and deflation cycle of the air cells. Both alternating mattress types are equally effective to prevent pressure ulcer development. © 2011 Elsevier Ltd. All rights reserved.
Multi-stage decoding for multi-level block modulation codes

NASA Technical Reports Server (NTRS)

Lin, Shu

1991-01-01

In this paper, we investigate various types of multi-stage decoding for multi-level block modulation codes, in which the decoding of a component code at each stage can be either soft-decision or hard-decision, maximum likelihood or bounded-distance. Error performance of codes is analyzed for a memoryless additive channel based on various types of multi-stage decoding, and upper bounds on the probability of an incorrect decoding are derived. Based on our study and computation results, we find that, if component codes of a multi-level modulation code and types of decoding at various stages are chosen properly, high spectral efficiency and large coding gain can be achieved with reduced decoding complexity. In particular, we find that the difference in performance between the suboptimum multi-stage soft-decision maximum likelihood decoding of a modulation code and the single-stage optimum decoding of the overall code is very small: only a fraction of dB loss in SNR at the probability of an incorrect decoding for a block of 10(exp -6). Multi-stage decoding of multi-level modulation codes really offers a way to achieve the best of three worlds, bandwidth efficiency, coding gain, and decoding complexity.
Multistage Estimation Of Frequency And Phase

NASA Technical Reports Server (NTRS)

Kumar, Rajendra

1991-01-01

Conceptual two-stage software scheme serves as prototype of multistage scheme for digital estimation of phase, frequency, and rate of change of frequency ("Doppler rate") of possibly phase-modulated received sinusoidal signal in communication system in which transmitter and/or receiver traveling rapidly, accelerating, and/or jerking severely. Each additional stage of multistage scheme provides increasingly refined estimate of frequency and phase of signal. Conceived for use in estimating parameters of signals from spacecraft and high dynamic GPS signal parameters, also applicable, to terrestrial stationary/mobile (e.g., cellular radio) and land-mobile/satellite communication systems.
Using formative research to design a context-specific behaviour change strategy to improve infant and young child feeding practices and nutrition in Nepal.

PubMed

Locks, Lindsey M; Pandey, Pooja R; Osei, Akoto K; Spiro, David S; Adhikari, Debendra P; Haselow, Nancy J; Quinn, Victoria J; Nielsen, Jennifer N

2015-10-01

Global recommendations on strategies to improve infant feeding, care and nutrition are clear; however, there is limited literature that explains methods for tailoring these recommendations to the local context where programmes are implemented. This paper aims to: (1) highlight the individual, cultural and environmental factors revealed by formative research to affect infant and young child feeding and care practices in Baitadi district of Far Western Nepal; and (2) outline how both quantitative and qualitative research methods were used to design a context-specific behaviour change strategy to improve child nutrition. Quantitative data on 750 children aged 12-23 months and their families were collected via surveys administered to mothers. The participants were selected using a multistage cluster sampling technique. The survey asked about knowledge, attitude and behaviours relating to infant and young child feeding. Qualitative data on breastfeeding and complementary feeding beliefs and practices were also collected from a separate sample via focus group discussions with mothers, and key informant interviews with mothers-in-law and husbands. Key findings revealed gaps in knowledge among many informants resulting in suboptimal infant and young child feeding practices - particularly with relation to duration of exclusive breastfeeding and dietary diversity of complementary foods. The findings from this research were then incorporated into a context-specific nutrition behaviour change communication strategy. © 2013 Helen Keller International © 2013 John Wiley & Sons, Ltd.
Development of thermal control methods for specialized components and scientific instruments at very low temperatures (follow-on)

NASA Technical Reports Server (NTRS)

Wright, J. P.; Wilson, D. E.

1976-01-01

Many payloads currently proposed to be flown by the space shuttle system require long-duration cooling in the 3 to 200 K temperature range. Common requirements also exist for certain DOD payloads. Parametric design and optimization studies are reported for multistage and diode heat pipe radiator systems designed to operate in this temperature range. Also optimized are ground test systems for two long-life passive thermal control concepts operating under specified space environmental conditions. The ground test systems evaluated are ultimately intended to evolve into flight test qualification prototypes for early shuttle flights.
The influence of the "cage" effect on the mechanism of reversible bimolecular multistage chemical reactions proceeding from different sites in solutions.

PubMed

Doktorov, Alexander B

2016-08-28

Manifestations of the "cage" effect at the encounters of reactants have been theoretically treated on the example of multistage reactions (including bimolecular exchange reactions as elementary stages) proceeding from different active sites in liquid solutions. It is shown that for reactions occurring near the contact of reactants, consistent consideration of quasi-stationary kinetics of such multistage reactions (possible in the framework of the encounter theory only) can be made on the basis of chemical concepts of the "cage complex," just as in the case of one-site model described in the literature. Exactly as in the one-site model, the presence of the "cage" effect gives rise to new channels of reactant transformation that cannot result from elementary event of chemical conversion for the given reaction mechanism. Besides, the multisite model demonstrates new (as compared to one-site model) features of multistage reaction course.
Dynamic analysis for solid waste management systems: an inexact multistage integer programming approach.

PubMed

Li, Yongping; Huang, Guohe

2009-03-01

In this study, a dynamic analysis approach based on an inexact multistage integer programming (IMIP) model is developed for supporting municipal solid waste (MSW) management under uncertainty. Techniques of interval-parameter programming and multistage stochastic programming are incorporated within an integer-programming framework. The developed IMIP can deal with uncertainties expressed as probability distributions and interval numbers, and can reflect the dynamics in terms of decisions for waste-flow allocation and facility-capacity expansion over a multistage context. Moreover, the IMIP can be used for analyzing various policy scenarios that are associated with different levels of economic consequences. The developed method is applied to a case study of long-term waste-management planning. The results indicate that reasonable solutions have been generated for binary and continuous variables. They can help generate desired decisions of system-capacity expansion and waste-flow allocation with a minimized system cost and maximized system reliability.
Novel scintillation detector design and performance for proton radiography and computed tomography.

PubMed

Bashkirov, V A; Schulte, R W; Hurley, R F; Johnson, R P; Sadrozinski, H F-W; Zatserklyaniy, A; Plautz, T; Giacometti, V

2016-02-01

Proton computed tomography (pCT) will enable accurate prediction of proton and ion range in a patient while providing the benefit of lower radiation exposure than in x-ray CT. The accuracy of the range prediction is essential for treatment planning in proton or ion therapy and depends upon the detector used to evaluate the water-equivalent path length (WEPL) of a proton passing through the object. A novel approach is presented for an inexpensive WEPL detector for pCT and proton radiography. A novel multistage detector with an aperture of 10 × 37.5 cm was designed to optimize the accuracy of the WEPL measurements while simplifying detector construction and the performance requirements of its components. The design of the five-stage detector was optimized through simulations based on the geant4 detector simulation toolkit, and the fabricated prototype was calibrated in water-equivalent millimeters with 200 MeV protons in the research beam line of the clinical proton synchrotron at Loma Linda University Medical Center. A special polystyrene step phantom was designed and built to speed up and simplify the calibration procedure. The calibrated five-stage detector was tested in the 200 MeV proton beam as part of the pCT head scanner, using a water phantom and polystyrene slabs to verify the WEPL reconstruction accuracy. The beam-test results demonstrated excellent performance of the new detector, in good agreement with the simulation results. The WEPL measurement accuracy is about 3.0 mm per proton in the 0-260 mm WEPL range required for a pCT head scan with a 200 MeV proton beam. The new multistage design approach to WEPL measurements for proton CT and radiography has been prototyped and tested. The test results show that the design is competitive with much more expensive calorimeter and range-counter designs.
Novel scintillation detector design and performance for proton radiography and computed tomography

PubMed Central

Schulte, R. W.; Hurley, R. F.; Johnson, R. P.; Sadrozinski, H. F.-W.; Zatserklyaniy, A.; Plautz, T.; Giacometti, V.

2016-01-01

Purpose: Proton computed tomography (pCT) will enable accurate prediction of proton and ion range in a patient while providing the benefit of lower radiation exposure than in x-ray CT. The accuracy of the range prediction is essential for treatment planning in proton or ion therapy and depends upon the detector used to evaluate the water-equivalent path length (WEPL) of a proton passing through the object. A novel approach is presented for an inexpensive WEPL detector for pCT and proton radiography. Methods: A novel multistage detector with an aperture of 10 × 37.5 cm was designed to optimize the accuracy of the WEPL measurements while simplifying detector construction and the performance requirements of its components. The design of the five-stage detector was optimized through simulations based on the geant4 detector simulation toolkit, and the fabricated prototype was calibrated in water-equivalent millimeters with 200 MeV protons in the research beam line of the clinical proton synchrotron at Loma Linda University Medical Center. A special polystyrene step phantom was designed and built to speed up and simplify the calibration procedure. The calibrated five-stage detector was tested in the 200 MeV proton beam as part of the pCT head scanner, using a water phantom and polystyrene slabs to verify the WEPL reconstruction accuracy. Results: The beam-test results demonstrated excellent performance of the new detector, in good agreement with the simulation results. The WEPL measurement accuracy is about 3.0 mm per proton in the 0–260 mm WEPL range required for a pCT head scan with a 200 MeV proton beam. Conclusions: The new multistage design approach to WEPL measurements for proton CT and radiography has been prototyped and tested. The test results show that the design is competitive with much more expensive calorimeter and range-counter designs. PMID:26843230
Simulation of 3-D viscous compressible flow in multistage turbomachinery by finite element methods

NASA Astrophysics Data System (ADS)

Sleiman, Mohamad

1999-11-01

The flow in a multistage turbomachinery blade row is compressible, viscous, and unsteady. Complex flow features such as boundary layers, wake migration from upstream blade rows, shocks, tip leakage jets, and vortices interact together as the flow convects through the stages. These interactions contribute significantly to the aerodynamic losses of the system and degrade the performance of the machine. The unsteadiness also leads to blade vibration and a shortening of its life. It is therefore difficult to optimize the design of a blade row, whether aerodynamically or structurally, in isolation, without accounting for the effects of the upstream and downstream rows. The effects of axial spacing, blade count, clocking (relative position of follow-up rotors with respect to wakes shed by upstream ones), and levels of unsteadiness may have a significance on performance and durability. In this Thesis, finite element formulations for the simulation of multistage turbomachinery are presented in terms of the Reynolds-averaged Navier-Stokes equations for three-dimensional steady or unsteady, viscous, compressible, turbulent flows. Three methodologies are presented and compared. First, a steady multistage analysis using a a-mixing- plane model has been implemented and has been validated against engine data. For axial machines, it has been found that the mixing plane simulation methods match very well the experimental data. However, the results for a centrifugal stage, consisting of an impeller followed by a vane diffuser of equal pitch, show flagrant inconsistency with engine performance data, indicating that the mixing plane method has been found to be inappropriate for centrifugal machines. Following these findings, a more complete unsteady multistage model has been devised for a configuration with equal number of rotor and stator blades (equal pitches). Non-matching grids are used at the rotor-stator interface and an implicit interpolation procedure devised to ensure continuity of fluxes across. This permits the rotor and stator equations to be solved in a fully- coupled manner, allowing larger time steps in attaining a time-periodic solution. This equal pitch approach has been validated on the complex geometry of a centrifugal stage. Finally, for a stage configuration with unequal pitches, the time-inclined method, developed by Giles (1991) for 2-D viscous compressible flow, has been extended to 3-D and formulated in terms of the physical solution vector U, rather than Q, a non-physical one. The method has been evaluated for unsteady flow through a rotor blade passage of the power turbine of a turboprop.
Effect of educational intervention based on the Health Belief Model on promoting self-care behaviors of type-2 diabetes patients.

PubMed

Shabibi, Parisa; Zavareh, Mohammad Sadegh Abedzadeh; Sayehmiri, Kourosh; Qorbani, Mostafa; Safari, Omid; Rastegarimehr, Babak; Mansourian, Morteza

2017-12-01

Diabetes is a chronic disease in which patients require lifelong self-care behaviors. The present study offset to determine the effect of educational intervention based on the Health Belief Model (HBM) on promoting self-care behaviors of type 2 diabetes patients in Ilam, Iran 2014. A quasi-experimental research was conducted based on HBM in which 70 type 2 diabetic patients from Ilam, western Iran in 2014 were selected by multi-stage random sampling. A self-designed questionnaire was used, and pre-test was administered, subsequently, the educational intervention sessions were provided in the form of presentation, questions and answers, group discussion, and practical demonstrations in four sessions over a period of one month. Two months after the intervention, the post-tests were administered. The data were analyzed via SPSS 20 applying independent samples t-test, paired samples t-test, and univariate and multivariate regressions at a significance level of less than 0.05. The mean scores of susceptibility, severity, perceived benefits and barriers, self-efficacy, and self-care behaviors were at average and lower levels before the intervention; nonetheless, after the educational intervention, the mean score of each HBM construct and the self-care behaviors significantly increased (p<0.001). Health education through HBM promotes the self-care behaviors of patients with type 2 diabetes.
NASA's Aerosol Sampling Experiment Summary

NASA Technical Reports Server (NTRS)

Meyer, Marit E.

2016-01-01

In a spacecraft cabin environment, the size range of indoor aerosols is much larger and they persist longer than on Earth because they are not removed by gravitational settling. A previous aerosol experiment in 1991 documented that over 90 of the mass concentration of particles in the NASA Space Shuttle air were between 10 m and 100 m based on measurements with a multi-stage virtual impactor and a nephelometer (Liu et al. 1991). While the now-retired Space Shuttle had short duration missions (less than two weeks), the International Space Station (ISS) has been continually inhabited by astronauts for over a decade. High concentrations of inhalable particles on ISS are potentially responsible for crew complaints of respiratory and eye irritation and comments about 'dusty' air. Air filtration is the current control strategy for airborne particles on the ISS, and filtration modeling, performed for engineering and design validation of the air revitalization system in ISS, predicted that PM requirements would be met. However, aerosol monitoring has never been performed on the ISS to verify PM levels. A flight experiment is in preparation which will provide data on particulate matter in ISS ambient air. Particles will be collected with a thermophoretic sampler as well as with passive samplers which will extend the particle size range of sampling. Samples will be returned to Earth for chemical and microscopic analyses, providing the first aerosol data for ISS ambient air.
Sampling Indoor Aerosols on the International Space Station

NASA Technical Reports Server (NTRS)

Meyer, Marit E.

2016-01-01

In a spacecraft cabin environment, the size range of indoor aerosols is much larger and they persist longer than on Earth because they are not removed by gravitational settling. A previous aerosol experiment in 1991 documented that over 90 of the mass concentration of particles in the NASA Space Shuttle air were between 10 m and 100 m based on measurements with a multi-stage virtual impactor and a nephelometer (Liu et al. 1991). While the now-retired Space Shuttle had short duration missions (less than two weeks), the International Space Station (ISS) has been continually inhabited by astronauts for over a decade. High concentrations of inhalable particles on ISS are potentially responsible for crew complaints of respiratory and eye irritation and comments about 'dusty' air. Air filtration is the current control strategy for airborne particles on the ISS, and filtration modeling, performed for engineering and design validation of the air revitalization system in ISS, predicted that PM requirements would be met. However, aerosol monitoring has never been performed on the ISS to verify PM levels. A flight experiment is in preparation which will provide data on particulate matter in ISS ambient air. Particles will be collected with a thermophoretic sampler as well as with passive samplers which will extend the particle size range of sampling. Samples will be returned to Earth for chemical and microscopic analyses, providing the first aerosol data for ISS ambient air.

Yellow fever risk assessment in the Central African Republic.

PubMed

Staples, J Erin; Diallo, Mawlouth; Janusz, Kristen B; Manengu, Casimir; Lewis, Rosamund F; Perea, William; Yactayo, Sergio; Sall, Amadou A

2014-10-01

Starting in 2008, the Central African Republic (CAR) experienced an unprecedented number of reported yellow fever (YF) cases. A risk assessment of YF virus (YFV) activity was conducted to estimate potential disease risk and vaccine needs. A multistage cluster sampling design was used to sample humans, non-human primates, and mosquitoes in distinct ecologic zones. Humans and non-human primates were tested for YFV-specific antibodies; mosquitoes were tested for YFV RNA. Overall, 13.3% (125/938) of humans were found to have naturally-acquired YFV antibodies. Antibody levels were higher in zones in the southern and south central regions of CAR. All sampled non-human primates (n=56) were known YFV reservoirs; one tested positive for YFV antibodies. Several known YF vectors were identified including Aedes africanus, Ae. aegypti, Ae. luteocephalus, and Ae. simpsoni. Several more urban locations were found to have elevated Breateau and Container indices for Ae. aegypti. A country-wide assessment of YF risk found YFV to be endemic in CAR. The potential for future YF cases and outbreaks, however, varied by ecologic zone. Improved vaccination coverage through mass campaign and childhood immunization was recommended to mitigate the YF risk. © The Author 2014. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Comparative stress levels among residents in three Chinese provincial capitals, 2001 and 2008.

PubMed

Yang, Tingzhong; Wu, Dan; Zhang, Weifang; Cottrell, Randall R; Rockett, Ian R H

2012-01-01

To compare stress levels among residents in large Chinese cities between 2001 and 2008. Survey data were collected in three mainland Chinese capital cities in two waves, in 2001 and 2008, respectively. Participants were recruited through a multi-stage stratified sampling process. Stress was assessed using the Perceived Stress Scale, Chinese version (CPSS). Descriptive methods were used to estimate mean stress levels and associated 95% confidence intervals. Estimates were adjusted by post-stratification weights. Indicating stable stress levels, respective adjusted mean stress scores for the combined samples of study participants were 23.90 (95%CI: 23.68-24.12) in 2001 and 23.69 (95%CI: 23.38-24.01) in 2008. A lower stress level in 2008 than in 2001 manifested among residents who were under 25 years of age; female; with a college or higher level education; divorced, widowed, or separated; members of the managerial and clerical group; students or army personnel; or with an annual income of at least 30,000 RMB. The overall stress level did not change among the combined sample of residents in the three Chinese study cities between 2001 and 2008. However, levels remained high and varied across social strata, and may have reflected a national trend among urban residents. Findings indicate a need for a new health policy, and call for the design and implementation of evidence-based interventions that target the highest-risk groups.
An Analysis of the Impact of the Research Utilization Project on Principals' Attitudes and on the Use of Information Services By Teachers and Other Field Personnel in 16 Target Elementary Schools of the District of Columbia.

ERIC Educational Resources Information Center

Robinson, Erika L.

Bridging the gap between the research resources and field personnel becomes an increasingly important problem. This study investigated the impact of the Research Utilization Project (RUP) on public elementary schools in the District of Columbia. In the 16 schools selected by a multistage stratified sampling method, the total number of information…
Multi-stage Mass Spectrometry of Poly(vinyl pyrrolidone) and Its Vinyl Succinimide Copolymer Formed upon Exposure to Sodium Hypochlorite

PubMed Central

Fouquet, Thierry; Torimura, Masaki; Sato, Hiroaki

2016-01-01

The degradation routes of poly(vinyl pyrrolidone) (PVP) exposed to sodium hypochlorite (bleach) have been previously investigated using chemical analyses such as infrared spectroscopy. So far, no reports have proposed mass spectrometry (MS) as an alternative tool despite its capability to provide molecular and structural information using its single stage electrospray (ESI) or matrix assisted laser desorption ionization (MALDI) and multi stage (MSn) configurations, respectively. The present study thus reports on the characterization of PVP after its exposure to bleach by high resolution MALDI spiralTOF-MS and Kendrick mass defect analysis providing clues as to the formation of a vinyl pyrrolidone/vinyl succinimide copolymeric degradation product. A thorough investigation of the fragmentation pathways of PVP adducted with sodium and proton allows one main route to be described—namely the release of the pyrrolidone pendant group in a charge remote and charge driven mechanism, respectively. Extrapolating this fragmentation pathway, the oxidation of vinyl pyrrolidone into vinyl succinimide hypothesized from the single stage MS is validated by the detection of an alternative succinimide neutral loss in lieu of the pyrrolidone release in the ESI-MSn spectra of the aged PVP sample. It constitutes an example of application of multi-stage mass spectrometry for the characterization of the degradation of polymeric samples at a molecular level. PMID:27800293
DOE Office of Scientific and Technical Information (OSTI.GOV)

Spitz, A.H.; Boynton, W.V.

Six ureilites (ALHA77257, ALHA81101, ALH82130, PCA82506, Kanna, and Novo Urei) were analyzed using neutron activation analysis for Ca, Sc, Cr, Mn, Fe, Co, Ni, Zn, Ga, REE, W, Re, Os, Ir, and Au. The authors examined bulk samples as well as acid-treated samples. In bulk samples the refractory siderophiles' concentrations range from approximately 0.1 to 1.0 times CI chondrites while the volatile siderophiles' concentrations range from approximately 0.1 to 1.0 times CI chondrites while the volatile siderophiles range from about 0.07 to 0.3 times CI chondrites. Rare earth elements (REEs) in ureilites are quite depleted and display light and heavymore » rare earth enrichments. The Antarctic meteorites display either much less pronounced v-shaped patterns or no enrichment in the light rare earths at all. In terms of the new trace-element results, ureilites do not fall into the coherent groups that other workers have defined by chemical or petrographic characteristics. Trace elements do provide additional constraints on the models for the petrogenesis of ureilites. In particular, the siderophile element abundances call for simplified models of chemical processing rather than the complex, multistage processing called for in silicate fractionation models. REE concentrations, on the other hand, imply multistage processing to produce the ureilites. None of the ureilite petrogenesis models extant account for the trace element data. These new data and the considerations of them with respect to the proposed ureilite petrogenesis models indicate that the direction of modeling should be toward contemplation of mixtures and how the components the authors observe in ureilites behave under such conditions.« less
Dynamically-allocated multi-queue buffers for VLSI communication switches

NASA Technical Reports Server (NTRS)

Tamir, Yuval; Frazier, Gregory L.

1992-01-01

Several buffer structures are discussed and compared in terms of implementation complexity, interswitch handshaking requirements, and their ability to deal with variations in traffic patterns and message lengths. A new design of buffers is presented that provide non-FIFO message handling and efficient storage allocation for variable size packets using linked lists managed by a simple on-chip controller. The new buffer design is evaluated by comparing it to several alternative designs in the context of a multistage interconnection network. The present modeling and simulations show that the new buffer outperforms alternative buffers and can thus be used to improve the performance of a wide variety of systems currently using less efficient buffers.
Aerodynamic Design of Axial-flow Compressors. Volume III

NASA Technical Reports Server (NTRS)

Johnson, Irving A; Bullock, Robert O; Graham, Robert W; Costilow, Eleanor L; Huppert, Merle C; Benser, William A; Herzig, Howard Z; Hansen, Arthur G; Jackson, Robert J; Yohner, Peggy L;

1956-01-01

Chapters XI to XIII concern the unsteady compressor operation arising when compressor blade elements stall. The fields of compressor stall and surge are reviewed in Chapters XI and XII, respectively. The part-speed operating problem in high-pressure-ratio multistage axial-flow compressors is analyzed in Chapter XIII. Chapter XIV summarizes design methods and theories that extend beyond the simplified two-dimensional approach used previously in the report. Chapter XV extends this three-dimensional treatment by summarizing the literature on secondary flows and boundary layer effects. Charts for determining the effects of errors in design parameters and experimental measurements on compressor performance are given in Chapters XVI. Chapter XVII reviews existing literature on compressor and turbine matching techniques.

Optimal design of gas adsorption refrigerators for cryogenic cooling

NASA Technical Reports Server (NTRS)

Chan, C. K.

1983-01-01

The design of gas adsorption refrigerators used for cryogenic cooling in the temperature range of 4K to 120K was examined. The functional relationships among the power requirement for the refrigerator, the system mass, the cycle time and the operating conditions were derived. It was found that the precool temperature, the temperature dependent heat capacities and thermal conductivities, and pressure and temperature variations in the compressors have important impacts on the cooling performance. Optimal designs based on a minimum power criterion were performed for four different gas adsorption refrigerators and a multistage system. It is concluded that the estimates of the power required and the system mass are within manageable limits in various spacecraft environments.
Attitudes Toward Domestic Violence and Corporal Punishment Among Former Soviet Union Immigrants in Israel.

PubMed

Enosh, Guy; Leshem, Elazar; Buchbinder, Eli

2016-10-01

The study regards attitudes of Russian immigrants in Israel toward wife abuse and corporal punishment. The sample consisted of 1,028 participants, based on a multistage cluster sampling. The study used a questionnaire related to immigration, acculturation, and attitudinal issues. The findings indicate a dual-causal model, in which corporal punishment attitudes contribute to wife abuse attitudes and vice versa. However, the effect of attitudes supporting corporal punishment was stronger than the effect of wife abuse attitudes, indicating that the attitudinal system as a precursor of violent behavior is already merging the two types of violence. © The Author(s) 2016.
Spatial dynamics of large-scale, multistage crab (Callinectes sapidus) dispersal: Determinants and consequences for recruitment

USGS Publications Warehouse

Etherington, L.L.; Eggleston, D.B.

2003-01-01

We assessed determinants and consequences of multistage dispersal on spatial recruitment of the blue crab, Callinectes sapidus, within the Croatan, Albemarle, Pamlico Estuarine System (CAPES), North Carolina, U.S.A. Large-scale sampling of early juvenile crabs over 4 years indicated that spatial abundance patterns were size-dependent and resulted from primary post-larval dispersal (pre-settlement) and secondary juvenile dispersal (early post-settlement). In general, primary dispersal led to high abundances within more seaward habitats, whereas secondary dispersal (which was relatively consistent) expanded the distribution of juveniles, potentially increasing the estuarine nursery capacity. There were strong relationships between juvenile crab density and specific wind characteristics; however, these patterns were spatially explicit. Various physical processes (e.g., seasonal wind events, timing and magnitude of tropical cyclones) interacted to influence dispersal during multiple stages and determined crab recruitment patterns. Our results suggest that the nursery value of different habitats is highly dependent on the dispersal potential (primary and secondary dispersal) to and from these areas, which is largely determined by the relative position of habitats within the estuarine landscape.
The influence of microwave-assisted drying techniques on the rehydration behavior of blueberries (Vaccinium corymbosum L.).

PubMed

Zielinska, Magdalena; Markowski, Marek

2016-04-01

The aim of this study was to determine the effect of: (a) different drying methods, (b) hot air temperature in a convection oven, and (c) the moisture content of fruits dehydrated by multi-stage drying which involves a transition between different stages of drying, on the rehydration kinetics of dry blueberries. Models describing rehydration kinetics were also studied. Blueberries dehydrated by multi-stage microwave-assisted drying, which involved a hot air pre-drying step at 80 °C until the achievement of a moisture content of 1.95 kg H2O kg(-1)DM, were characterized by significantly higher rates of initial and successive rehydration as well as smaller initial loss of soluble solids in comparison with the samples dried by other methods. The highest initial rehydration rate and the smallest loss of soluble solids after 30 min of soaking were determined at 0.46 min(-1) and 0.29 kg DM kg(-1)DM, respectively. The Peleg model and the first-order-kinetic model fit the experimental data well. Copyright © 2015 Elsevier Ltd. All rights reserved.
Arab Teens Lifestyle Study (ATLS): objectives, design, methodology and implications

PubMed Central

Al-Hazzaa, Hazzaa M; Musaiger, Abdulrahman O

2011-01-01

Background There is a lack of comparable data on physical activity, sedentary behavior, and dietary habits among Arab adolescents, which limits our understanding and interpretation of the relationship between obesity and lifestyle parameters. Therefore, we initiated the Arab Teens Lifestyle Study (ATLS). The ATLS is a multicenter collaborative project for assessing lifestyle habits of Arab adolescents. The objectives of the ATLS project were to investigate the prevalence rates for overweight and obesity, physical activity, sedentary activity and dietary habits among Arab adolescents, and to examine the interrelationships between these lifestyle variables. This paper reports on the objectives, design, methodology, and implications of the ATLS. Design/Methods The ATLS is a school-based cross-sectional study involving 9182 randomly selected secondary-school students (14–19 years) from major Arab cities, using a multistage stratified sampling technique. The participating Arab cities included Riyadh, Jeddah, and Al-Khobar (Saudi Arabia), Bahrain, Dubai (United Arab Emirates), Kuwait, Amman (Jordan), Mosel (Iraq), Muscat (Oman), Tunisia (Tunisia) and Kenitra (Morocco). Measured variables included anthropometric measurements, physical activity, sedentary behavior, sleep duration, and dietary habits. Discussion The ATLS project will provide a unique opportunity to collect and analyze important lifestyle information from Arab adolescents using standardized procedures. This is the first time a collaborative Arab project will simultaneously assess broad lifestyle variables in a large sample of adolescents from numerous urbanized Arab regions. This joint research project will supply us with comprehensive and recent data on physical activity/inactivity and eating habits of Arab adolescents relative to obesity. Such invaluable lifestyle-related data are crucial for developing public health policies and regional strategies for health promotion and disease prevention. PMID:22253540
[Advances in studies on multi-stage countercurrent extraction technology in traditional Chinese medicine].

PubMed

Xie, Zhi-Peng; Liu, Xue-Song; Chen, Yong; Cai, Ming; Qu, Hai-Bin; Cheng, Yi-Yu

2007-05-01

Multi-stage countercurrent extraction technology, integrating solvent extraction, repercolation with dynamic and countercurrent extraction, is a novel extraction technology for the traditional Chinese medicine. This solvent-saving, energy-saving and high-extraction-efficiency technology can at the most drive active compounds to diffuse from the herbal materials into the solvent stage by stage by creating concentration differences between the herbal materials and the solvents. This paper reviewed the basic principle, the influence factors and the research progress and trends of the equipments and the application of the multi-stage countercurrent extraction.
Full 3D Analysis of the GE90 Turbofan Primary Flowpath

NASA Technical Reports Server (NTRS)

Turner, Mark G.

2000-01-01

The multistage simulations of the GE90 turbofan primary flowpath components have been performed. The multistage CFD code, APNASA, has been used to analyze the fan, fan OGV and booster, the 10-stage high-pressure compressor and the entire turbine system of the GE90 turbofan engine. The code has two levels of parallel, and for the 18 blade row full turbine simulation has 87.3 percent parallel efficiency with 121 processors on an SGI ORIGIN. Grid generation is accomplished with the multistage Average Passage Grid Generator, APG. Results for each component are shown which compare favorably with test data.
A Multistage Approach for Image Registration.

PubMed

Bowen, Francis; Hu, Jianghai; Du, Eliza Yingzi

2016-09-01

Successful image registration is an important step for object recognition, target detection, remote sensing, multimodal content fusion, scene blending, and disaster assessment and management. The geometric and photometric variations between images adversely affect the ability for an algorithm to estimate the transformation parameters that relate the two images. Local deformations, lighting conditions, object obstructions, and perspective differences all contribute to the challenges faced by traditional registration techniques. In this paper, a novel multistage registration approach is proposed that is resilient to view point differences, image content variations, and lighting conditions. Robust registration is realized through the utilization of a novel region descriptor which couples with the spatial and texture characteristics of invariant feature points. The proposed region descriptor is exploited in a multistage approach. A multistage process allows the utilization of the graph-based descriptor in many scenarios thus allowing the algorithm to be applied to a broader set of images. Each successive stage of the registration technique is evaluated through an effective similarity metric which determines subsequent action. The registration of aerial and street view images from pre- and post-disaster provide strong evidence that the proposed method estimates more accurate global transformation parameters than traditional feature-based methods. Experimental results show the robustness and accuracy of the proposed multistage image registration methodology.
Nurses views on accepting the creation of a nurses’ health monitoring system

PubMed Central

Rasoulzadeh, Nasrin; Abbaszadeh, Abbas; Zaefarian, Reza; Khounraz, Fariba

2017-01-01

Background Nurses’ health is often accompanied by various dangers due to the nature of their career. Therefore, it is required to monitor their health. Based on designing any system, users’ views should be investigated relative to the usefulness, necessity and acceptance of the system. Then, a designing and implementing process is conducted. Objective To investigate nurses’ views on accepting the creation of a Nurses’ Health Monitoring System. Methods This cross-sectional study was conducted in 2015. Sample size was 586 nurses of Shahid Beheshti University of Medical Sciences. Sampling was conducted using multi-stage random sampling method. Research tool was a two-section researcher-made questionnaire. In the first section, demographic data were studied and in the second section, a twelve-item questionnaire was presented based on technology acceptance model. Five-item questions were regulated on perceived usefulness (PU) and perceived ease of use (PEU) and views towards creating this system. Validity of the questionnaire was approved by content validity and content validity index and its reliability was approved by Cronbach’s alpha. Data were analyzed using SPSS16 and descriptive statistics (frequency distribution, percentage, mean). Results The majority of participants (75.3%) were females between 25–35 years of age (44.4%) and (58.2%) were married. Mean work experience was 11.5±8.19. Mean perceived usefulness (PU) (17.36±2.66) and perceived ease of use (PEU) (16.75±2.65) and views towards using a Nurses’ Health Monitoring System was (16.220±3.05). Conclusion Over two-thirds of nurses demonstrated perceived usefulness and perceived ease of use as well as positive views towards creating a nurses’ health monitoring system. It is recommended to design and implement a nurses’ health monitoring system based on local culture of Iranian nurses using IT in the health sector. PMID:28713521
Methodology of phase II clinical trials in metastatic elderly breast cancer: a literature review.

PubMed

Cabarrou, B; Mourey, L; Dalenc, F; Balardy, L; Kanoun, D; Roché, H; Boher, J M; Rougé-Bugat, M E; Filleron, Thomas

2017-08-01

As the incidence of invasive breast cancer will increase with age, the number of elderly patients with a diagnosis metastatic breast cancer will also rise. But the use of cytotoxic drugs in elderly metastatic breast cancer patients is not systematic and is dreaded by medical oncologists. The need for prospective oncologic data from this population seems increasingly obvious. The main objective of this review is to investigate design and characteristics of phase II trials that assess activity and feasibility of chemotherapies in elderly advanced/metastatic breast cancer patients. An electronic search in PUBMED allowed us to retrieve articles published in English language on phase II trials in elderly metastatic breast cancer between January 2002 and May 2016. Sixteen publications were finally included in this review. The primary endpoint was a simple, a composite, and a co-primary endpoints in 11, three, and two studies, respectively. Efficacy was the primary objective in 15 studies: simple (n = 10), composite (n = 3), co-primary endpoints (n = 2). Composite or co-primary endpoints combined efficacy and toxicity. Thirteen studies used multistage designs. Only five studies evaluated the feasibility, i.e., to jointly assess efficacy and tolerance to treatment (toxicity, quality of life, etc) as primary endpoint. Development of elderly specific phase III clinical trials might be challenging, it therefore seems essential to conduct phase II clinical trials evaluating jointly efficacy and toxicity in a well-defined geriatric population. Use of multistage designs that take into account heterogeneity would allow to identify a subpopulation at interim analysis and to reduce the number of patients exposed to an inefficient or a toxic treatment regimen. It is crucial to evaluate new therapies (targeted therapies, immunotherapies) using adequate methodologies (Study design, endpoint).
Multi-stage separations based on dielectrophoresis

DOEpatents

Mariella, Jr., Raymond P.

2004-07-13

A system utilizing multi-stage traps based on dielectrophoresis. Traps with electrodes arranged transverse to the flow and traps with electrodes arranged parallel to the flow with combinations of direct current and alternating voltage are used to trap, concentrate, separate, and/or purify target particles.
SOX OUT ON A LIMB (LIMESTONE INJECTION MULTISTAGE BURNER)

EPA Science Inventory

The paper describes the most recent results from the Limestone Injection Multistage Burner (LIMB) program, covering results from the wall-fired demonstration. Tests were conducted to determine the efficacy of commercial calcium hydroxide (Ca(OH)2) and of calcium-lignosulfonate-mo...
DEVELOPMENTS IN LIMB (LIMESTONE INJECTION MULTISTAGE BURNER) TECHNOLOGY

EPA Science Inventory

The paper describes the most recent results from the Limestone Injection Multistage Burner (LIMB) program, results from the wall-fired demonstration. Tests were conducted to determine the efficacy of commercial calcium hydroxide--Ca(OH)2--supplied by Marblehead Lime Co. and of ca...

Disdrometer-based C-Band Radar Quantitative Precipitation Estimation (QPE) in a highly complex terrain region in tropical Colombia.

NASA Astrophysics Data System (ADS)

Sepúlveda, J.; Hoyos Ortiz, C. D.

2017-12-01

An adequate quantification of precipitation over land is critical for many societal applications including agriculture, hydroelectricity generation, water supply, and risk management associated with extreme events. The use of rain gauges, a traditional method for precipitation estimation, and an excellent one, to estimate the volume of liquid water during a particular precipitation event, does not allow to fully capture the highly spatial variability of the phenomena which is a requirement for almost all practical applications. On the other hand, the weather radar, an active remote sensing sensor, provides a proxy for rainfall with fine spatial resolution and adequate temporary sampling, however, it does not measure surface precipitation. In order to fully exploit the capabilities of the weather radar, it is necessary to develop quantitative precipitation estimation (QPE) techniques combining radar information with in-situ measurements. Different QPE methodologies are explored and adapted to local observations in a highly complex terrain region in tropical Colombia using a C-Band radar and a relatively dense network of rain gauges and disdrometers. One important result is that the expressions reported in the literature for extratropical locations are not representative of the conditions found in the tropical region studied. In addition to reproducing the state-of-the-art techniques, a new multi-stage methodology based on radar-derived variables and disdrometer data is proposed in order to achieve the best QPE possible. The main motivation for this new methodology is based on the fact that most traditional QPE methods do not directly take into account the different uncertainty sources involved in the process. The main advantage of the multi-stage model compared to traditional models is that it allows assessing and quantifying the uncertainty in the surface rain rate estimation. The sub-hourly rainfall estimations using the multi-stage methodology are realistic compared to observed data in spite of the many sources of uncertainty including the sampling volume, the different physical principles of the sensors, the incomplete understanding of the microphysics of precipitation and, the most important, the rapidly varying droplet size distribution.
An evaluation of the utility of ERTS-1 data for mapping and developing natural resources of Iran

NASA Technical Reports Server (NTRS)

Ebtehadj, K. (Principal Investigator)

1973-01-01

The author has identified the following significant results. Significant results are reported in the creation of an Iranian photomosaic from ERTS-1 imagery; in tectonic and structural mapping and interpretation, including discovery of significant new fault patterns in Iran; in river and lake mapping; in wetlands and fisheries nursery delineation and mapping; in range and agricultural surveys and inventories using multi-stage sample methods; and in the computer analysis of ERTS-1 digital tapes for urban land use.
A false sense of security? Can tiered approach be trusted to accurately classify immunogenicity samples?

PubMed

Jaki, Thomas; Allacher, Peter; Horling, Frank

2016-09-05

Detecting and characterizing of anti-drug antibodies (ADA) against a protein therapeutic are crucially important to monitor the unwanted immune response. Usually a multi-tiered approach that initially rapidly screens for positive samples that are subsequently confirmed in a separate assay is employed for testing of patient samples for ADA activity. In this manuscript we evaluate the ability of different methods used to classify subject with screening and competition based confirmatory assays. We find that for the overall performance of the multi-stage process the method used for confirmation is most important where a t-test is best when differences are moderate to large. Moreover we find that, when differences between positive and negative samples are not sufficiently large, using a competition based confirmation step does yield poor classification of positive samples. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.
Screened selection design for randomised phase II oncology trials: an example in chronic lymphocytic leukaemia

PubMed Central

2013-01-01

Background As there are limited patients for chronic lymphocytic leukaemia trials, it is important that statistical methodologies in Phase II efficiently select regimens for subsequent evaluation in larger-scale Phase III trials. Methods We propose the screened selection design (SSD), which is a practical multi-stage, randomised Phase II design for two experimental arms. Activity is first evaluated by applying Simon’s two-stage design (1989) on each arm. If both are active, the play-the-winner selection strategy proposed by Simon, Wittes and Ellenberg (SWE) (1985) is applied to select the superior arm. A variant of the design, Modified SSD, also allows the arm with the higher response rates to be recommended only if its activity rate is greater by a clinically-relevant value. The operating characteristics are explored via a simulation study and compared to a Bayesian Selection approach. Results Simulations showed that with the proposed SSD, it is possible to retain the sample size as required in SWE and obtain similar probabilities of selecting the correct superior arm of at least 90%; with the additional attractive benefit of reducing the probability of selecting ineffective arms. This approach is comparable to a Bayesian Selection Strategy. The Modified SSD performs substantially better than the other designs in selecting neither arm if the underlying rates for both arms are desirable but equivalent, allowing for other factors to be considered in the decision making process. Though its probability of correctly selecting a superior arm might be reduced, it still performs reasonably well. It also reduces the probability of selecting an inferior arm. Conclusions SSD provides an easy to implement randomised Phase II design that selects the most promising treatment that has shown sufficient evidence of activity, with available R codes to evaluate its operating characteristics. PMID:23819695
Screened selection design for randomised phase II oncology trials: an example in chronic lymphocytic leukaemia.

PubMed

Yap, Christina; Pettitt, Andrew; Billingham, Lucinda

2013-07-03

As there are limited patients for chronic lymphocytic leukaemia trials, it is important that statistical methodologies in Phase II efficiently select regimens for subsequent evaluation in larger-scale Phase III trials. We propose the screened selection design (SSD), which is a practical multi-stage, randomised Phase II design for two experimental arms. Activity is first evaluated by applying Simon's two-stage design (1989) on each arm. If both are active, the play-the-winner selection strategy proposed by Simon, Wittes and Ellenberg (SWE) (1985) is applied to select the superior arm. A variant of the design, Modified SSD, also allows the arm with the higher response rates to be recommended only if its activity rate is greater by a clinically-relevant value. The operating characteristics are explored via a simulation study and compared to a Bayesian Selection approach. Simulations showed that with the proposed SSD, it is possible to retain the sample size as required in SWE and obtain similar probabilities of selecting the correct superior arm of at least 90%; with the additional attractive benefit of reducing the probability of selecting ineffective arms. This approach is comparable to a Bayesian Selection Strategy. The Modified SSD performs substantially better than the other designs in selecting neither arm if the underlying rates for both arms are desirable but equivalent, allowing for other factors to be considered in the decision making process. Though its probability of correctly selecting a superior arm might be reduced, it still performs reasonably well. It also reduces the probability of selecting an inferior arm. SSD provides an easy to implement randomised Phase II design that selects the most promising treatment that has shown sufficient evidence of activity, with available R codes to evaluate its operating characteristics.
Isolation of >1 nm Diameter Single-Wall Carbon Nanotube Species Using Aqueous Two-Phase Extraction.

PubMed

Fagan, Jeffrey A; Hároz, Erik H; Ihly, Rachelle; Gui, Hui; Blackburn, Jeffrey L; Simpson, Jeffrey R; Lam, Stephanie; Hight Walker, Angela R; Doorn, Stephen K; Zheng, Ming

2015-05-26

In this contribution we demonstrate the effective separation of single-wall carbon nanotube (SWCNT) species with diameters larger than 1 nm through multistage aqueous two-phase extraction (ATPE), including isolation at the near-monochiral species level up to at least the diameter range of SWCNTs synthesized by electric arc synthesis (1.3-1.6 nm). We also demonstrate that refined species are readily obtained from both the metallic and semiconducting subpopulations of SWCNTs and that this methodology is effective for multiple SWCNT raw materials. Using these data, we report an empirical function for the necessary surfactant concentrations in the ATPE method for separating different SWCNTs into either the lower or upper phase as a function of SWCNT diameter. This empirical correlation enables predictive separation design and identifies a subset of SWCNTs that behave unusually as compared to other species. These results not only dramatically increase the range of SWCNT diameters to which species selective separation can be achieved but also demonstrate that aqueous two-phase separations can be designed across experimentally accessible ranges of surfactant concentrations to controllably separate SWCNT populations of very small (∼0.62 nm) to very large diameters (>1.7 nm). Together, the results reported here indicate that total separation of all SWCNT species is likely feasible by the ATPE method, especially given future development of multistage automated extraction techniques.
Wearable/disposable sweat-based glucose monitoring device with multistage transdermal drug delivery module

PubMed Central

Lee, Hyunjae; Song, Changyeong; Hong, Yong Seok; Kim, Min Sung; Cho, Hye Rim; Kang, Taegyu; Shin, Kwangsoo; Choi, Seung Hong; Hyeon, Taeghwan; Kim, Dae-Hyeong

2017-01-01

Electrochemical analysis of sweat using soft bioelectronics on human skin provides a new route for noninvasive glucose monitoring without painful blood collection. However, sweat-based glucose sensing still faces many challenges, such as difficulty in sweat collection, activity variation of glucose oxidase due to lactic acid secretion and ambient temperature changes, and delamination of the enzyme when exposed to mechanical friction and skin deformation. Precise point-of-care therapy in response to the measured glucose levels is still very challenging. We present a wearable/disposable sweat-based glucose monitoring device integrated with a feedback transdermal drug delivery module. Careful multilayer patch design and miniaturization of sensors increase the efficiency of the sweat collection and sensing process. Multimodal glucose sensing, as well as its real-time correction based on pH, temperature, and humidity measurements, maximizes the accuracy of the sensing. The minimal layout design of the same sensors also enables a strip-type disposable device. Drugs for the feedback transdermal therapy are loaded on two different temperature-responsive phase change nanoparticles. These nanoparticles are embedded in hyaluronic acid hydrogel microneedles, which are additionally coated with phase change materials. This enables multistage, spatially patterned, and precisely controlled drug release in response to the patient’s glucose level. The system provides a novel closed-loop solution for the noninvasive sweat-based management of diabetes mellitus. PMID:28345030
Hydraulic design to optimize the treatment capacity of Multi-Stage Filtration units

NASA Astrophysics Data System (ADS)

Mushila, C. N.; Ochieng, G. M.; Otieno, F. A. O.; Shitote, S. M.; Sitters, C. W.

2016-04-01

Multi-Stage Filtration (MSF) can provide a robust treatment alternative for surface water sources of variable water quality in rural communities at low operation and maintenance costs. MSF is a combination of Slow Sand Filters (SSFs) and Pre-treatment systems. The general objective of this research was to optimize the treatment capacity of MSF. A pilot plant study was undertaken to meet this objective. The pilot plant was monitored for a continuous 98 days from commissioning till the end of the project. Three main stages of MSF namely: The Dynamic Gravel Filter (DGF), Horizontal-flow Roughing Filter (HRF) and SSF were identified, designed and built. The response of the respective MSF units in removal of selected parameters guiding drinking water quality such as microbiological (Faecal and Total coliform), Suspended Solids, Turbidity, PH, Temperature, Iron and Manganese was investigated. The benchmark was the Kenya Bureau (KEBS) and World Health Organization (WHO) Standards for drinking water quality. With respect to microbiological raw water quality improvement, MSF units achieved on average 98% Faecal and 96% Total coliform removal. Results obtained indicate that implementation of MSF in rural communities has the potential to increase access to portable water to the rural populace with a probable consequent decrease in waterborne diseases. With a reduced down time due to illness, more time would be spent in undertaking other economic activities.
Multistage polymeric lens structure in silica-waveguides for photonic functional circuits

NASA Astrophysics Data System (ADS)

Tate, Atsushi; Suzuki, Takanori; Tsuda, Hiroyuki

2005-04-01

A waveguide lens composed of multistage polymer-filled thin grooves in a silica planar lightwave circuit (PLC) is proposed and the low-loss structure is designed. Both an imaging optical system and a Fourier-Transform optical system can be configured in a PLC by use of a waveguide lens. It makes a PLC functional and its design flexible. Moreover, a focal length of a lens is tunable with large thermo-optic effect of the polymer. A concatenated lens is formed to attain a desirable focal length with low-loss. The thickness of each lens and the spacing are about 10-50 microns. The simulation showed that the radiation loss of the light propagate through 20-stage grooves filled with a polymer was only 0.868 dB when the refractive index of the polymer was 1.57, the groove width was 30 microns, and the spacing between adjacent grooves was 15 microns. For example, the single lens structure that the center thickness is 30 microns, the diameter is 300 microns, and the refractive index of the polymer was 1.57, have a focal length of 4600 microns. The focal length of 450 microns can be obtained with 20-stage concatenated lens structure. The larger numerical aperture can be realized with a polymer of higher refractive index. We have applied the concatenated lens structure to various photonic circuits including optical couplers, a variable optical attenuator.
Accurate calculation of conformational free energy differences in explicit water: the confinement-solvation free energy approach.

PubMed

Esque, Jeremy; Cecchini, Marco

2015-04-23

The calculation of the free energy of conformation is key to understanding the function of biomolecules and has attracted significant interest in recent years. Here, we present an improvement of the confinement method that was designed for use in the context of explicit solvent MD simulations. The development involves an additional step in which the solvation free energy of the harmonically restrained conformers is accurately determined by multistage free energy perturbation simulations. As a test-case application, the newly introduced confinement/solvation free energy (CSF) approach was used to compute differences in free energy between conformers of the alanine dipeptide in explicit water. The results are in excellent agreement with reference calculations based on both converged molecular dynamics and umbrella sampling. To illustrate the general applicability of the method, conformational equilibria of met-enkephalin (5 aa) and deca-alanine (10 aa) in solution were also analyzed. In both cases, smoothly converged free-energy results were obtained in agreement with equilibrium sampling or literature calculations. These results demonstrate that the CSF method may provide conformational free-energy differences of biomolecules with small statistical errors (below 0.5 kcal/mol) and at a moderate computational cost even with a full representation of the solvent.
The prevalence of selected potentially hazardous workplace exposures in the US: findings from the 2010 National Health Interview Survey.

PubMed

Calvert, Geoffrey M; Luckhaupt, Sara E; Sussell, Aaron; Dahlhamer, James M; Ward, Brian W

2013-06-01

Assess the national prevalence of current workplace exposure to potential skin hazards, secondhand smoke (SHS), and outdoor work among various industry and occupation groups. Also, assess the national prevalence of chronic workplace exposure to vapors, gas, dust, and fumes (VGDF) among these groups. Data were obtained from the 2010 National Health Interview Survey (NHIS). NHIS is a multistage probability sample survey of the civilian non-institutionalized population of the US. Prevalence rates and their variances were calculated using SUDAAN to account for the complex NHIS sample design. The data for 2010 were available for 17,524 adults who worked in the 12 months that preceded interview. The highest prevalence rates of hazardous workplace exposures were typically in agriculture, mining, and construction. The prevalence rate of frequent handling of or skin contact with chemicals, and of non-smokers frequently exposed to SHS at work was highest in mining and construction. Outdoor work was most common in agriculture (85%), construction (73%), and mining (65%). Finally, frequent occupational exposure to VGDF was most common among mining (67%), agriculture (53%), and construction workers (51%). We identified industries and occupations with the highest prevalence of potentially hazardous workplace exposures, and provided targets for investigation and intervention activities. Copyright © 2012 Wiley Periodicals, Inc.
Relationship between the levels of family burden in caring for older people with the incidence of mistreatment.

PubMed

Rekawati, Etty; Hamid, AchirYani S; Sahar, Junaiti; Widyatuti

2018-02-01

Caring for older people can be a burden for the family that led to mistreatment. To determine the relationship between the levels of family burden in caring for older people with the occurrence of mistreatment incidence. A cross sectional study design was conducted with 135 older people who live with their family as respondents. 135 families with older people at Kelurahan/Village of Harjamukti area, Kecamatan/ District of Cimanggis, Depok city. This study applied probability sampling technique with multistage cluster sampling. Family characteristics show that almost half of older people were caring by family members (caregivers) who were aged 20-39 years, nearly all caregivers were women, family income mostly less than UMK, families mostly monosyllabic nation Betawi and caregivers mostly were their own child. Most of the families stated that no expense in caring for the older people (89.6%), but there are still families who feel the burden of caring. The highest type of mistreatmet of the older people is psychological mistreatments. From the statistical test obtained by p value equals to 0.553, it was concluded there was no correlation between the incidences of any family burden with mistreatment. Copyright © 2018 Elsevier España, S.L.U. All rights reserved.
Regret and rationalization among smokers in Thailand and Malaysia: findings from the International Tobacco Control Southeast Asia Survey.

PubMed

Lee, Wonkyong B; Fong, Geoffrey T; Zanna, Mark P; Omar, Maizurah; Sirirassamee, Buppha; Borland, Ron

2009-07-01

To test whether differences of history and strength in tobacco control policies will influence social norms, which, in turn, will influence quit intentions, by influencing smokers' regret and rationalization. The data were from the International Tobacco Control (ITC) Policy Evaluation Southeast Asia Survey, a cohort survey of representative samples of adult smokers in Thailand (N = 2,000) and Malaysia (N = 2,006). The survey used a stratified multistage sampling design. Measures included regret, rationalization, social norms, and quit intention. Thai smokers were more likely to have quit intentions than Malaysian smokers. This difference in quit intentions was, in part, explained by the country differences in social norms, regret, and rationalization. Reflecting Thailand's history of stronger tobacco control policies, Thai smokers, compared with Malaysian smokers, perceived more negative social norms toward smoking, were more likely to regret, and less likely to rationalize smoking. Mediational analyses revealed that these differences in social norms, accounted, in part, for the country-quit intention relation and that regret and rationalization accounted, in part, for the social norm-quit intention relation. The results suggest that social norms toward smoking, which are shaped by tobacco control policies, and smokers' regret and rationalization influence quit intentions.
Chinese primary care physicians and work attitudes.

PubMed

Shi, Leiyu; Hung, Li-Mei; Song, Kuimeng; Rane, Sarika; Tsai, Jenna; Sun, Xiaojie; Li, Hui; Meng, Qingyue

2013-01-01

China passed a landmark health care reform in 2009, aimed at improving health care for all citizens by strengthening the primary care system, largely through improvements to infrastructure. However, research has shown that the work attitudes of primary care physicians (PCPs) can greatly affect the stability of the overall workforce and the quality and delivery of health care. The purpose of this study is to investigate the relationship between reported work attitudes of PCPs and their personal, work, and educational characteristics. A multi-stage, complex sampling design was employed to select a sample of 434 PCPs practicing in urban and rural primary care settings, and a survey questionnaire was administered by researchers with sponsorship from the Ministry of Health. Four outcome measures describing work attitudes were used, as well as a number of personal-, work-, and practice-related factors. Findings showed that although most PCPs considered their work as important, a substantial number also reported large workloads, job pressure, and turnover intentions. Findings suggest that policymakers should focus on training and educational opportunities for PCPs and consider ways to ease workload pressures and improve salaries. These policy improvements must accompany reform efforts that are already underway before positive changes in reduced disparities and improved health outcomes can be realized in China.
The Prevalence of Selected Potentially Hazardous Workplace Exposures in the US: Findings From the 2010 National Health Interview Survey

PubMed Central

Calvert, Geoffrey M.; Luckhaupt, Sara E.; Sussell, Aaron; Dahlhamer, James M.; Ward, Brian W.

2015-01-01

Objective Assess the national prevalence of current workplace exposure to potential skin hazards, secondhand smoke (SHS), and outdoor work among various industry and occupation groups. Also, assess the national prevalence of chronic workplace exposure to vapors, gas, dust, and fumes (VGDF) among these groups. Methods Data were obtained from the 2010 National Health Interview Survey (NHIS). NHIS is a multistage probability sample survey of the civilian non-institutionalized population of the US. Prevalence rates and their variances were calculated using SUDAAN to account for the complex NHIS sample design. Results The data for 2010 were available for 17,524 adults who worked in the 12 months that preceded interview. The highest prevalence rates of hazardous workplace exposures were typically in agriculture, mining, and construction. The prevalence rate of frequent handling of or skin contact with chemicals, and of non-smokers frequently exposed to SHS at work was highest in mining and construction. Outdoor work was most common in agriculture (85%), construction (73%), and mining (65%). Finally, frequent occupational exposure to VGDF was most common among mining (67%), agriculture (53%), and construction workers (51%). Conclusion We identified industries and occupations with the highest prevalence of potentially hazardous workplace exposures, and provided targets for investigation and intervention activities. PMID:22821700
Overweight and Obesity Among Chinese College Students: An Exploration of Gender as Related to External Environmental Influences.

PubMed

Jiang, Shuhan; Peng, Sihui; Yang, Tingzhong; Cottrell, Randall R; Li, Lu

2018-01-01

While many studies have examined factors associated with overweight and obesity among college students, no study has yet compared gender differences influencing overweight and obesity using a multilevel framework. The present study examines different influences on overweight and obesity between men and women at both individual and environmental levels. Participants were 11,673 college students identified through a multistage survey sampling process conducted in 50 Chinese universities. The prevalence of overweight and obesity was 9.5% (95% CI [7.7, 11.3]) in the overall study sample, 13.9% (95% CI [11.5, 16.7]) in males and 6.1% (95% CI [4.1, 8.1]) in females, respectively. We found that higher family income, perceived life stress, home region GDP, and university city unemployment were associated with higher overweight and obesity levels in males, independent of other individual- and city-level covariates. However, unlike male students, only unemployment was associated with overweight and obesity among females. Our research indicates Chinese males are more susceptible to overweight and obesity, and are more easily influenced by external variants than Chinese females. This information should be considered in formulating gender-specific policies and designing and implementing effective interventions to reduce the prevalence of overweight and obesity among young adult male college students.
Elevated incidence rates of diabetes in Peru: report from PERUDIAB, a national urban population-based longitudinal study

PubMed Central

Seclen, Segundo Nicolas; Rosas, Moises Ernesto; Arias, Arturo Jaime; Medina, Cecilia Alexandra

2017-01-01

Objective A recent report from a non-nationally representative, geographically diverse sample in four separate communities in Peru suggests an unusually high diabetes incidence. We aimed to estimate the national diabetes incidence rate using PERUDIAB, a probabilistic, national urban population-based longitudinal study. Research design and methods 662 subjects without diabetes, selected by multistage, cluster, random sampling of households, representing the 24 administrative and the 3 (coast, highlands and jungle) natural regions across the country, from both sexes, aged 25+ years at baseline, enrolled in 2010–2012, were followed for 3.8 years. New diabetes cases were defined as fasting blood glucose ≥126 mg/dL or on medical diabetes treatment. Results There were 49 cases of diabetes in 2408 person-years follow-up. The weighted cumulative incidence of diabetes was 7.2% while the weighted incidence rate was estimated at 19.5 (95% CI 13.9 to 28.3) new cases per 1000 person-years. Older age, obesity and technical or higher education were statistically associated with the incidence of diabetes. Conclusion Our results confirm that the incidence of diabetes in Peru is among the highest reported globally. The fast economic growth in the last 20 years, high overweight and obesity rates may have triggered this phenomenon. PMID:28878935
Continuous Mass Measurement on Conveyor Belt

NASA Astrophysics Data System (ADS)

Tomobe, Yuki; Tasaki, Ryosuke; Yamazaki, Takanori; Ohnishi, Hideo; Kobayashi, Masaaki; Kurosu, Shigeru

The continuous mass measurement of packages on a conveyor belt will become greatly important. In the mass measurement, the sequence of products is generally random. An interesting possibility of raising throughput of the conveyor line without increasing the conveyor belt speed is offered by the use of two or three conveyor belt scales (called a multi-stage conveyor belt scale). The multi-stage conveyor belt scale can be created which will adjust the conveyor belt length to the product length. The conveyor belt scale usually has maximum capacities of less than 80kg and 140cm, and achieves measuring rates of more than 150 packages per minute and more. The output signals from the conveyor belt scale are always contaminated with noises due to vibrations of the conveyor and the product to be measured in motion. In this paper an employed digital filter is of Finite Impulse Response (FIR) type designed under the consideration on the dynamics of the conveyor system. The experimental results on the conveyor belt scale suggest that the filtering algorithms are effective enough to practical applications to some extent.
a Fractal Analysis for Net Present Value of Multi-Stage Hydraulic Fractured Horizontal Well

NASA Astrophysics Data System (ADS)

Lu, Hong-Lin; Zhang, Ji-Jun; Tan, Xiao-Hua; Li, Xiao-Ping; Zhao, Jia-Hui

Because of the low permeability, multi-stage hydraulic fractured horizontal wells (MHFHWs) occupy a dominant position among production wells in tight gas reservoir. However, net present value (NPV) estimation method for MHFHW in tight gas reservoirs often ignores the effect of heterogeneity in microscopic pore structure. Apart from that, a new fractal model is presented for NPV of MHFHW, based on the fractal expressions of formation parameters. First, with the aid of apparent permeability model, a pseudo pressure expression considering both reservoir fractal features and slippage effect is derived, contributing to establish the productivity model. Secondly, economic assessment method is built based on the fractal productivity model, in order to obtain the NPV of MHFHW. Thirdly, the type curves are illustrated and the influences of different fractal parameters are discussed. The pore fractal dimensions Df and the capillary tortuosity fractal dimensions DT have significant effects on the NPV of an MHFHW. Finally, the proposed model in this paper provides a new methodology for analyzing and predicting the NPV of an MHFHW and may be conducive to a better understanding of the optimal design of MHFHW.
Development of novel general equation for multistage epicyclic gearset with corrected teeth: non-constrained approach

NASA Astrophysics Data System (ADS)

Kijanka, Piotr; Jablonski, Adam; Dziedziech, Kajetan; Dworakowski, Ziemowit; Uhl, Tadeusz

2016-04-01

A large number of commercial systems for condition monitoring of most common planetary gearboxes used in wind turbines and mining machinery have been developed for years. However nowadays, multistage constructions are encountered in industries. These are not necessarily planetary, but generally epicyclic. Current state of the art, according to the authors knowledge, does not give general equations for a case where multistage systems are considered, where some of the gears consist all moving parts. Hence, currently available CMS systems are not suitable for condition monitoring of these kinds of systems. The paper presents a new general equation, which allows calculating the characteristic frequencies of any kind of multistage gear sets, as a result of theoretical investigation. Illustrated solution does not assume a fixed speed of any element. Moreover, presented equation takes into account corrected teeth, making developed equations most general from all available in tribology science. Presented scientific development is currently implemented in a modern European CMS.

Influence of dispatching rules on average production lead time for multi-stage production systems.

PubMed

Hübl, Alexander; Jodlbauer, Herbert; Altendorfer, Klaus

2013-08-01

In this paper the influence of different dispatching rules on the average production lead time is investigated. Two theorems based on covariance between processing time and production lead time are formulated and proved theoretically. Theorem 1 links the average production lead time to the "processing time weighted production lead time" for the multi-stage production systems analytically. The influence of different dispatching rules on average lead time, which is well known from simulation and empirical studies, can be proved theoretically in Theorem 2 for a single stage production system. A simulation study is conducted to gain more insight into the influence of dispatching rules on average production lead time in a multi-stage production system. We find that the "processing time weighted average production lead time" for a multi-stage production system is not invariant of the applied dispatching rule and can be used as a dispatching rule independent indicator for single-stage production systems.
Multistage degradation modeling for BLDC motor based on Wiener process

NASA Astrophysics Data System (ADS)

Yuan, Qingyang; Li, Xiaogang; Gao, Yuankai

2018-05-01

Brushless DC motors are widely used, and their working temperatures, regarding as degradation processes, are nonlinear and multistage. It is necessary to establish a nonlinear degradation model. In this research, our study was based on accelerated degradation data of motors, which are their working temperatures. A multistage Wiener model was established by using the transition function to modify linear model. The normal weighted average filter (Gauss filter) was used to improve the results of estimation for the model parameters. Then, to maximize likelihood function for parameter estimation, we used numerical optimization method- the simplex method for cycle calculation. Finally, the modeling results show that the degradation mechanism changes during the degradation of the motor with high speed. The effectiveness and rationality of model are verified by comparison of the life distribution with widely used nonlinear Wiener model, as well as a comparison of QQ plots for residual. Finally, predictions for motor life are gained by life distributions in different times calculated by multistage model.
Design, construction and evaluation of a 12.2 GHz, 4.0 kW-CW high efficiency klystron amplifier. [for satellite-borne TV broadcast transmitters

NASA Technical Reports Server (NTRS)

Vishida, J. M.; Brodersen, L. K.

1974-01-01

An analytical and experimental program is described, for studying design techniques for optimizing the conversion efficiency of klystron amplifiers, and to utilize these techniques in the development and fabrication of an X-band 4 kW cw klystron, for use in satellite-borne television broadcast transmitters. The design is based on a technique for increasing the RF beam current by using the second harmonic space charge forces in the bunched beam. Experimental analysis was also made of a method to enhance circuit efficiency in the klystron cavities. The design incorporates a collector which is demountable from the tube to facilitate multistage depressed collector experiments employing an axisymmetric, electrostatic collector for linear beam microwave tubes.
Secondary-electron-emission losses in multistage depressed collectors and traveling-wave-tube efficiency improvements with carbon collector electrode surfaces

NASA Technical Reports Server (NTRS)

Ramins, P.; Ebihara, B. T.

1986-01-01

Secondary-electron-emission losses in multistage depressed collectors (MDC's) and their effects on overall traveling-wave-tube (TWT) efficiency were investigated. Two representative TWT's and several computer-modeled MDC's were used. The experimental techniques provide the measurement of both the TWT overall and the collector efficiencies. The TWT-MDC performance was optimized and measured over a wide range of operating conditions, with geometrically identical collectors, which utilized different electrode surface materials. Comparisons of the performance of copper electrodes to that of various forms of carbon, including pyrolytic and iisotropic graphites, were stressed. The results indicate that: (1) a significant improvement in the TWT overall efficiency was obtained in all cases by the use of carbon, rather than copper electrodes, and (2) that the extent of this efficiency enhancement depended on the characteristics of the TWT, the TWT operating point, the MDC design, and collector voltages. Ion textured graphite was found to be particularly effective in minimizing the secondary-electron-emission losses. Experimental and analytical results, however, indicate that it is at least as important to provide a maximum amount of electrostatic suppression of secondary electrons by proper MDC design. Such suppression, which is obtained by ensuring that a substantial suppressing electric field exists over the regions of the electrodes where most of the current is incident, was found to be very effective. Experimental results indicate that, with proper MDC design and the use of electrode surfaces with low secondary-electron yield, degradation of the collector efficiency can be limited to a few percent.
Open Port Probe Sampling Interface for the Direct Coupling of Biocompatible Solid-Phase Microextraction to Atmospheric Pressure Ionization Mass Spectrometry.

PubMed

Gómez-Ríos, Germán Augusto; Liu, Chang; Tascon, Marcos; Reyes-Garcés, Nathaly; Arnold, Don W; Covey, Thomas R; Pawliszyn, Janusz

2017-04-04

In recent years, the direct coupling of solid phase microextraction (SPME) and mass spectrometry (MS) has shown its great potential to improve limits of quantitation, accelerate analysis throughput, and diminish potential matrix effects when compared to direct injection to MS. In this study, we introduce the open port probe (OPP) as a robust interface to couple biocompatible SPME (Bio-SPME) fibers to MS systems for direct electrospray ionization. The presented design consisted of minimal alterations to the front-end of the instrument and provided better sensitivity, simplicity, speed, wider compound coverage, and high-throughput in comparison to the LC-MS based approach. Quantitative determination of clenbuterol, fentanyl, and buprenorphine was successfully achieved in human urine. Despite the use of short extraction/desorption times (5 min/5 s), limits of quantitation below the minimum required performance levels (MRPL) set by the world antidoping agency (WADA) were obtained with good accuracy (≥90%) and linearity (R 2 > 0.99) over the range evaluated for all analytes using sample volumes of 300 μL. In-line technologies such as multiple reaction monitoring with multistage fragmentation (MRM 3 ) and differential mobility spectrometry (DMS) were used to enhance the selectivity of the method without compromising analysis speed. On the basis of calculations, once coupled to high throughput, this method can potentially yield preparation times as low as 15 s per sample based on the 96-well plate format. Our results demonstrated that Bio-SPME-OPP-MS efficiently integrates sampling/sample cleanup and atmospheric pressure ionization, making it an advantageous configuration for several bioanalytical applications, including doping in sports, in vivo tissue sampling, and therapeutic drug monitoring.
Numerical solutions of 2-D multi-stage rotor/stator unsteady flow interactions

NASA Astrophysics Data System (ADS)

Yang, R.-J.; Lin, S.-J.

1991-01-01

The Rai method of single-stage rotor/stator flow interaction is extended to handle multistage configurations. In this study, a two-dimensional Navier-Stokes multi-zone approach was used to investigate unsteady flow interactions within two multistage axial turbines. The governing equations are solved by an iterative, factored, implicit finite-difference, upwind algorithm. Numerical accuracy is checked by investigating the effect of time step size, the effect of subiteration in the Newton-Raphson technique, and the effect of full viscous versus thin-layer approximation. Computer results compared well with experimental data. Unsteady flow interactions, wake cutting, and the associated evolution of vortical entities are discussed.
Maisotsenko cycle applications in multi-stage ejector recycling module for chemical production

NASA Astrophysics Data System (ADS)

Levchenko, D. O.; Artyukhov, A. E.; Yurko, I. V.

2017-08-01

The article is devoted to the theoretical bases of multistage (multi-level) utilization modules as part of chemical plants (on the example of the technological line for obtaining nitrogen fertilizers). The possibility of recycling production waste (ammonia vapors, dust and substandard nitrogen fertilizers) using ejection devices and waste heat using Maisotsenko cycle technology (Maisotsenko heat and mass exchanger (HMX), Maisotsenko power cycles and recuperators, etc.) is substantiated. The principle of operation of studied recycling module and prospects for its implementation are presented. An improved technological scheme for obtaining granular fertilizers and granules with porous structure with multistage (multi-level) recycling module is proposed.
Multi-stage decoding of multi-level modulation codes

NASA Technical Reports Server (NTRS)

Lin, Shu; Kasami, Tadao; Costello, Daniel J., Jr.

1991-01-01

Various types of multi-stage decoding for multi-level modulation codes are investigated. It is shown that if the component codes of a multi-level modulation code and types of decoding at various stages are chosen properly, high spectral efficiency and large coding gain can be achieved with reduced decoding complexity. Particularly, it is shown that the difference in performance between the suboptimum multi-stage soft-decision maximum likelihood decoding of a modulation code and the single-stage optimum soft-decision decoding of the code is very small, only a fraction of dB loss in signal to noise ratio at a bit error rate (BER) of 10(exp -6).
Approximate median regression for complex survey data with skewed response.

PubMed

Fraser, Raphael André; Lipsitz, Stuart R; Sinha, Debajyoti; Fitzmaurice, Garrett M; Pan, Yi

2016-12-01

The ready availability of public-use data from various large national complex surveys has immense potential for the assessment of population characteristics using regression models. Complex surveys can be used to identify risk factors for important diseases such as cancer. Existing statistical methods based on estimating equations and/or utilizing resampling methods are often not valid with survey data due to complex survey design features. That is, stratification, multistage sampling, and weighting. In this article, we accommodate these design features in the analysis of highly skewed response variables arising from large complex surveys. Specifically, we propose a double-transform-both-sides (DTBS)'based estimating equations approach to estimate the median regression parameters of the highly skewed response; the DTBS approach applies the same Box-Cox type transformation twice to both the outcome and regression function. The usual sandwich variance estimate can be used in our approach, whereas a resampling approach would be needed for a pseudo-likelihood based on minimizing absolute deviations (MAD). Furthermore, the approach is relatively robust to the true underlying distribution, and has much smaller mean square error than a MAD approach. The method is motivated by an analysis of laboratory data on urinary iodine (UI) concentration from the National Health and Nutrition Examination Survey. © 2016, The International Biometric Society.
Efficacy of Peer Education for Adopting Preventive Behaviors against Head Lice Infestation in Female Elementary School Students: A Randomised Controlled Trial

PubMed Central

Zamani-Alavijeh, Fereshteh; Mojadam, Mehdi

2017-01-01

Background Pediculosis is a common parasitic infestation in students worldwide, including Iran. This condition is more prevalent in populous and deprived communities with poor personal hygiene. This study sought to assess the efficacy of peer education for adopting preventive behaviors against pediculosis in female elementary school students based on the Health Belief Model (HBM). Methods A total of 179 female fifth grade students were selected using multistage random sampling and were randomly allocated to control and intervention groups. A standard questionnaire was designed and administered to collect baseline information. An educational intervention was then designed based on the conducted needs assessment. The educational program consisted of three sessions, held by peers for the intervention group. The questionnaire was re-administered one month after the intervention. Independent and paired t-test, Pearson’s correlation coefficient, and regression analysis were applied as appropriate. Results The two groups had no significant differences in the scores of knowledge, HBM constructs, or behavior before the intervention. After the intervention, however, the mean scores of all parameters significantly improved in the intervention group. Conclusion Peer education based on HBM is an effective strategy to promote preventive behaviors against pediculosis in among fifth grade female elementary school students in Iran. PMID:28072852
Drought vulnerability assessment: The case of wheat farmers in Western Iran

NASA Astrophysics Data System (ADS)

Zarafshani, Kiumars; Sharafi, Lida; Azadi, Hossein; Hosseininia, Gholamhossein; De Maeyer, Philippe; Witlox, Frank

2012-12-01

Drought, as a natural and slow-onset phenomenon, creates numerous damages to agricultural communities. As a drought prone area in the Middle East, Iran has currently launched a crisis management approach to mitigate the harmful impacts of drought. However, thus far studies indicate that effective drought management strategies should be designed based upon vulnerability management which can increase farmers' ability to challenge the impacts. The purpose of this study was to assess drought vulnerability across three drought intensities (very high, extremely high, and critical) areas in Western Iran. Accordingly, a survey study was applied and 370 wheat farmers who all experienced drought during 2007-2009 were selected through a multi-stage stratified random sampling method. Face to face interviews were used to collect data on vulnerability indices from the farmers. Me-Bar and Valdez's vulnerability formula was applied to assess the vulnerability of wheat farmers during drought. Results revealed that the farmers' vulnerability is influenced mainly by economic, socio-cultural, psychological, technical, and infrastructural factors. The results also indicated that the farmers in Sarpole-Zahab township were most vulnerable compared to those in the Kermanshah township as the least vulnerable. Accordingly, some conclusions and recommendations are drawn for both policy-makers and practitioners who often must prioritize limited resources in the design vulnerability-reducing interventions.
Approximate Median Regression for Complex Survey Data with Skewed Response

PubMed Central

Fraser, Raphael André; Lipsitz, Stuart R.; Sinha, Debajyoti; Fitzmaurice, Garrett M.; Pan, Yi

2016-01-01

Summary The ready availability of public-use data from various large national complex surveys has immense potential for the assessment of population characteristics using regression models. Complex surveys can be used to identify risk factors for important diseases such as cancer. Existing statistical methods based on estimating equations and/or utilizing resampling methods are often not valid with survey data due to complex survey design features. That is, stratification, multistage sampling and weighting. In this paper, we accommodate these design features in the analysis of highly skewed response variables arising from large complex surveys. Specifically, we propose a double-transform-both-sides (DTBS) based estimating equations approach to estimate the median regression parameters of the highly skewed response; the DTBS approach applies the same Box-Cox type transformation twice to both the outcome and regression function. The usual sandwich variance estimate can be used in our approach, whereas a resampling approach would be needed for a pseudo-likelihood based on minimizing absolute deviations (MAD). Furthermore, the approach is relatively robust to the true underlying distribution, and has much smaller mean square error than a MAD approach. The method is motivated by an analysis of laboratory data on urinary iodine (UI) concentration from the National Health and Nutrition Examination Survey. PMID:27062562
Recent Trends in Fusion Gyrotron Development at KIT

NASA Astrophysics Data System (ADS)

Gantenbein, G.; Avramidis, K.; Franck, J.; Illy, S.; Ioannidis, Z. C.; Jin, J.; Jelonnek, J.; Kalaria, P.; Pagonakis, I. Gr.; Ruess, S.; Rzesnicki, T.; Thumm, M.; Wu, C.

2017-10-01

ECRH&CD is one of the favorite heating system for magnetically confined nuclear fusion plasmas. KIT is strongly involved in the development of high power gyrotrons for use in ECRH systems for nuclear fusion. KIT is upgrading the sub-components of the existing 2 MW, 170 GHz coaxial-cavity short-pulse gyrotron to support long-pulse operation up to 1 s, all components will be equipped with a specific active cooling system. Two important developments for future high power, highly efficient gyrotrons will be discussed: design of gyrotrons with high operating frequency (˜ 240 GHz) and efficiency enhancement by using advanced collector designs with multi-staged voltage depression.
Shock and vibration response of multistage structure

NASA Technical Reports Server (NTRS)

Lee, S. Y.; Liyeos, J. G.; Tang, S. S.

1968-01-01

Study of the shock and vibration response of a multistage structure employed analytically, lumped-mass, continuous-beam, multimode, and matrix-iteration methods. The study was made on the load paths, transmissibility, and attenuation properties along a longitudinal axis of a long, slender structure with increasing degree of complexity.
Automated Simultaneous Assembly for Multistage Testing

ERIC Educational Resources Information Center

Breithaupt, Krista; Ariel, Adelaide; Veldkamp, Bernard P.

2005-01-01

This article offers some solutions used in the assembly of the computerized Uniform Certified Public Accountancy (CPA) licensing examination as practical alternatives for operational programs producing large numbers of forms. The Uniform CPA examination was offered as an adaptive multistage test (MST) beginning in April of 2004. Examples of…
40 CFR 600.316-08 - Multistage manufacture.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Multistage manufacture. 600.316-08 Section 600.316-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Labeling § 600.316-08...
40 CFR 600.316-08 - Multistage manufacture.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Multistage manufacture. 600.316-08 Section 600.316-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Labeling § 600.316-08...
40 CFR 600.316-08 - Multistage manufacture.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Multistage manufacture. 600.316-08 Section 600.316-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Labeling § 600.316-08...
Multi-stage volcanic island flank collapses with coeval explosive caldera-forming eruptions.

PubMed

Hunt, James E; Cassidy, Michael; Talling, Peter J

2018-01-18

Volcanic flank collapses and explosive eruptions are among the largest and most destructive processes on Earth. Events at Mount St. Helens in May 1980 demonstrated how a relatively small (<5 km 3 ) flank collapse on a terrestrial volcano could immediately precede a devastating eruption. The lateral collapse of volcanic island flanks, such as in the Canary Islands, can be far larger (>300 km 3 ), but can also occur in complex multiple stages. Here, we show that multistage retrogressive landslides on Tenerife triggered explosive caldera-forming eruptions, including the Diego Hernandez, Guajara and Ucanca caldera eruptions. Geochemical analyses were performed on volcanic glasses recovered from marine sedimentary deposits, called turbidites, associated with each individual stage of each multistage landslide. These analyses indicate only the lattermost stages of subaerial flank failure contain materials originating from respective coeval explosive eruption, suggesting that initial more voluminous submarine stages of multi-stage flank collapse induce these aforementioned explosive eruption. Furthermore, there are extended time lags identified between the individual stages of multi-stage collapse, and thus an extended time lag between the initial submarine stages of failure and the onset of subsequent explosive eruption. This time lag succeeding landslide-generated static decompression has implications for the response of magmatic systems to un-roofing and poses a significant implication for ocean island volcanism and civil emergency planning.
Thermal analysis applied to irradiated propolis

NASA Astrophysics Data System (ADS)

Matsuda, Andrea Harumi; Machado, Luci Brocardo; del Mastro, Nélida Lucia

2002-03-01

Propolis is a resinous hive product, collected by bees. Raw propolis requires a decontamination procedure and irradiation appears as a promising technique for this purpose. The valuable properties of propolis for food and pharmaceutical industries have led to increasing interest in its technological behavior. Thermal analysis is a chemical analysis that gives information about changes on heating of great importance for technological applications. Ground propolis samples were 60Co gamma irradiated with 0 and 10 kGy. Thermogravimetry curves shown a similar multi-stage decomposition pattern for both irradiated and unirradiated samples up to 600°C. Similarly, through differential scanning calorimetry , a coincidence of melting point of irradiated and unirradiated samples was found. The results suggest that the irradiation process do not interfere on the thermal properties of propolis when irradiated up to 10 kGy.

A coaxial-output capacitor-loaded annular pulse forming line.

PubMed

Li, Rui; Li, Yongdong; Su, Jiancang; Yu, Binxiong; Xu, Xiudong; Zhao, Liang; Cheng, Jie; Zeng, Bo

2018-04-01

A coaxial-output capacitor-loaded annular pulse forming line (PFL) is developed in order to reduce the flat top fluctuation amplitude of the forming quasi-square pulse and improve the quality of the pulse waveform produced by a Tesla-pulse forming network (PFN) type pulse generator. A single module composed of three involute dual-plate PFNs is designed, with a characteristic impedance of 2.44 Ω, an electrical length of 15 ns, and a sustaining voltage of 60 kV. The three involute dual-plate PFNs connected in parallel have the same impedance and electrical length. Due to the existed small inductance and capacitance per unit length in each involute dual-plate PFN, the upper cut-off frequency of the PFN is increased. As a result, the entire annular PFL has better high-frequency response capability. Meanwhile, the three dual-plate PFNs discharge in parallel, which is much closer to the coaxial output. The series connecting inductance between adjacent two modules is significantly reduced when the annular PFL modules are connected in series. The pulse waveform distortion is reduced when the pulse transfers along the modules. Finally, the shielding electrode structure is applied on both sides of the module. The electromagnetic field is restricted in the module when a single module discharges, and the electromagnetic coupling between the multi-stage annular PFLs is eliminated. Based on the principle of impedance matching between the multi-stage annular PFL and the coaxial PFL, the structural optimization design of a mixed PFL in a Tesla type pulse generator is completed with the transient field-circuit co-simulation method. The multi-stage annular PFL consists of 18 stage annular PFL modules in series, with the characteristic impedance of 44 Ω, the electrical length of 15 ns, and the sustaining voltage of 1 MV. The mixed PFL can generate quasi-square electrical pulses with a pulse width of 43 ns, and the fluctuation ratio of the pulse flat top is less than 8% when the pulse rise time is about 5 ns.
A coaxial-output capacitor-loaded annular pulse forming line

NASA Astrophysics Data System (ADS)

Li, Rui; Li, Yongdong; Su, Jiancang; Yu, Binxiong; Xu, Xiudong; Zhao, Liang; Cheng, Jie; Zeng, Bo

2018-04-01

A coaxial-output capacitor-loaded annular pulse forming line (PFL) is developed in order to reduce the flat top fluctuation amplitude of the forming quasi-square pulse and improve the quality of the pulse waveform produced by a Tesla-pulse forming network (PFN) type pulse generator. A single module composed of three involute dual-plate PFNs is designed, with a characteristic impedance of 2.44 Ω, an electrical length of 15 ns, and a sustaining voltage of 60 kV. The three involute dual-plate PFNs connected in parallel have the same impedance and electrical length. Due to the existed small inductance and capacitance per unit length in each involute dual-plate PFN, the upper cut-off frequency of the PFN is increased. As a result, the entire annular PFL has better high-frequency response capability. Meanwhile, the three dual-plate PFNs discharge in parallel, which is much closer to the coaxial output. The series connecting inductance between adjacent two modules is significantly reduced when the annular PFL modules are connected in series. The pulse waveform distortion is reduced when the pulse transfers along the modules. Finally, the shielding electrode structure is applied on both sides of the module. The electromagnetic field is restricted in the module when a single module discharges, and the electromagnetic coupling between the multi-stage annular PFLs is eliminated. Based on the principle of impedance matching between the multi-stage annular PFL and the coaxial PFL, the structural optimization design of a mixed PFL in a Tesla type pulse generator is completed with the transient field-circuit co-simulation method. The multi-stage annular PFL consists of 18 stage annular PFL modules in series, with the characteristic impedance of 44 Ω, the electrical length of 15 ns, and the sustaining voltage of 1 MV. The mixed PFL can generate quasi-square electrical pulses with a pulse width of 43 ns, and the fluctuation ratio of the pulse flat top is less than 8% when the pulse rise time is about 5 ns.
The Multistage Compressor Facility

NASA Technical Reports Server (NTRS)

Flegel, Ashlie

2004-01-01

Research and developments of new aerospace technologies is one of Glenn Research Center's specialties. One facility that deals with the research of aerospace technologies is the High-speed Multistage Compressor Facility. This facility will be testing the performance and efficiency of an Ultra Efficient Engine Technology (UEET) two-stage compressor. There is a lot of preparation involved with testing something of this caliber. Before the test article can be installed into the test rig, the facility must be fully operational and ready to run. Meaning all the necessary instrumentation must be calibrated and installed in the facility. The test rig should also be in safe operating condition, and the proper safety permits obtained. In preparation for the test, the Multistage Compressor Facility went through a few changes. For instance the facility will now be utilizing slip rings, the gearbox went through some maintenance, new lubrications systems replaced the old ones, and special instrumentation needs to be fine tuned to achieve the maximum amount of accurate data. Slips rings help gather information off of a rotating device - in this case from a shaft - onto stationary contacts. The contacts (or brushes) need to be cooled to reduce the amount of frictional heat produced between the slip ring and brushes. The coolant being run through the slip ring is AK-225, a material hazardous to the ozone. To abide by the safety regulations the coolant must be run through a closed chiller system. A new chiller system was purchased but the reservoir that holds the coolant was ventilated which doesn t make the system truly closed and sealed. My task was to design and have a new reservoir built for the chiller system that complies with the safety guidelines. The gearbox had some safety issues also. Located in the back of the gearbox an inching drive was set up. When the inching drive is in use the gears and chain are bare and someone can easily get caught up in it. So to prevent anyone from getting hurt in the gears I designed a chain guard. Additional information is included in the original extended abstract.
KINETIC STUDIES RELATED TO THE LIMB (LIMESTONE INJECTION MULTISTAGE BURNER) BURNER

EPA Science Inventory

The report gives results of theoretical and experimental studies of subjects related to the limestone injection multistage burner (LIMB). The main findings include data on the rate of evolution of H2S from different coals and on the dependence of the rate of evolution on the dist...
Multi-stage Continuous Culture Fermentation of Glucose-Xylose Mixtures to Fuel Ethanol using Genetically Engineered Saccharomyces cerevisiae 424A

EPA Science Inventory

Multi-stage continuous (chemostat) culture fermentation (MCCF) with variable fermentor volumes was carried out to study utilizing glucose and xylose for ethanol production by means of mixed sugar fermentation (MSF). Variable fermentor volumes were used to enable enhanced sugar u...
Prevalence and Correlates of Direct Self-Injurious Behavior among Chinese Adolescents: Findings from a Multicenter and Multistage Survey.

PubMed

Xin, Xiuhong; Wang, Yuping; Fang, Jianqun; Ming, Qingsen; Yao, Shuqiao

2017-05-01

Direct self-injurious behavior (DSIB) has become an important focus due to its perniciousness and perplexity. Little is known about its prevalence and correlative factors in Chinese adolescents, including how data may differ according to gender. A multicenter, multistage stratified cluster random sampling was used to examine the previous 12-month prevalence of DSIB, as well as the possible correlates of demographics, risky behaviors, suicidality, and psychosocial factors associated with DSIB in a school-based sample of 11,880 students (49.5 % boys and 50.5 % girls). Approximately 30 % of the adolescents in the sample reported at least one incident of DSIB in the past 12-month period. After controlling for demographic variables, analyses of the independent relationships of DSIB with risky behaviors, suicidality, and psychosocial factors were conducted for each gender. Smoking, binge drinking, running away from home, suicide ideation, suicide plans, positive affect, and physical symptoms were identified as common factors associated with DSIB for both genders in the final model. In addition, truancy, fighting, physical inactivity, motor impulsiveness, and depressed affect were found to be related to DSIB in boys, whereas suicide attempts and somatic complaints were found to be related to DSIB in girls. Separation anxiety and social anxiety associated negatively with DSIB in boys and girls, respectively. DSIB was not found to independently relate to attention impulsiveness, non-planned impulsiveness, self-esteem, or harm avoidance in either genders. DSIB was prevalent in Chinese adolescents. Programs intended to promote physical and mental health in adolescents should take into account gender differences in DSIB-associated factors, including risky behaviors, suicidality, and psychosocial factors.
Arab Teens Lifestyle Study (ATLS): objectives, design, methodology and implications.

PubMed

Al-Hazzaa, Hazzaa M; Musaiger, Abdulrahman O

2011-01-01

There is a lack of comparable data on physical activity, sedentary behavior, and dietary habits among Arab adolescents, which limits our understanding and interpretation of the relationship between obesity and lifestyle parameters. Therefore, we initiated the Arab Teens Lifestyle Study (ATLS). The ATLS is a multicenter collaborative project for assessing lifestyle habits of Arab adolescents. The objectives of the ATLS project were to investigate the prevalence rates for overweight and obesity, physical activity, sedentary activity and dietary habits among Arab adolescents, and to examine the interrelationships between these lifestyle variables. This paper reports on the objectives, design, methodology, and implications of the ATLS. The ATLS is a school-based cross-sectional study involving 9182 randomly selected secondary-school students (14-19 years) from major Arab cities, using a multistage stratified sampling technique. The participating Arab cities included Riyadh, Jeddah, and Al-Khobar (Saudi Arabia), Bahrain, Dubai (United Arab Emirates), Kuwait, Amman (Jordan), Mosel (Iraq), Muscat (Oman), Tunisia (Tunisia) and Kenitra (Morocco). Measured variables included anthropometric measurements, physical activity, sedentary behavior, sleep duration, and dietary habits. The ATLS project will provide a unique opportunity to collect and analyze important lifestyle information from Arab adolescents using standardized procedures. This is the first time a collaborative Arab project will simultaneously assess broad lifestyle variables in a large sample of adolescents from numerous urbanized Arab regions. This joint research project will supply us with comprehensive and recent data on physical activity/inactivity and eating habits of Arab adolescents relative to obesity. Such invaluable lifestyle-related data are crucial for developing public health policies and regional strategies for health promotion and disease prevention.
Predictors and risk factors for the intestinal shedding of Escherichia coli O157 among working donkeys (Equus asinus) in Nigeria

PubMed Central

Jedial, Jesse T.; Shittu, Aminu; Tambuwal, Faruk M.; Abubakar, Mikail B.; Garba, Muhammed K.; Kwaga, Jacob P.; Fasina, Folorunso O.

2015-01-01

Objectives Escherichia coli are an important group of bacteria in the normal gastrointestinal system but can sometimes cause infections in domestic animals and man. Donkeys are routinely used as multipurpose animal but details of burdens of potentially infectious bacteria associated with it are limited. The prevalence and associations between intestinal shedding of E. coli O157 and animal characteristics and management factors were studied among 240 randomly selected working donkeys in north-western Nigeria. Design Four local government areas, of Sokoto State in north-western Nigeria were recruited in this study. A multistage randomised cluster design was used to select subjects and donkey owners within selected zones. Confirmation of infection was based on bacterial culture, isolation and biochemical test for E. coli O157 from faecal samples. Results Of the total bacteria isolated, 203 of the 329 (61.70 per cent) were E. coli, 76 of which was E. coli serotype O157. A multivariable logistic regression model was used to examine the relation between intestinal shedding of E. coli O157 and selected variables. The analysis yielded five potential predictors of shedding: soft faeces in donkeys, Akaza and Fari ecotypes of donkey were positive predictors while maize straw as feed and sampling during the cold dry period were negative predictors. Conclusions This study concludes that controlling intestinal shedding of E. coli O157 among working donkeys in Nigeria is possible using the identified predictors in planning appropriate interventions to reduced human risk of infection. PMID:26392892
High-performance liquid chromatography-diode array detection-electrospray ionization multi-stage mass spectrometric screening of an insect/plant system: the case of Spodoptera littoralis/Lycopersicon esculentum phenolics and alkaloids.

PubMed

Ferreres, Federico; Taveira, Marcos; Gil-Izquierdo, Angel; Oliveira, Luísa; Teixeira, Tânia; Valentão, Patrícia; Simões, Nelson; Andrade, Paula B

2011-07-30

High-performance liquid chromatography-diode array detection-electrospray ionization multi-stage mass spectrometry (HPLC-DAD-ESI-MS(n)) is considered to be a very valuable tool for the characterization of compounds found in trace amounts in natural matrices, as their previous isolation and clean-up steps can be avoided. Micro-scale separation increases the potential of this analytical technique, allowing the determination of compounds in reduced samples. Spodoptera littoralis represents a major challenge to Solanaceae plants, as it is one of the most deleterious pests. The S. littoralis/Lycopersicon esculentum system was studied for the first time concerning glycoalkaloids and phenolics. Using HPLC-DAD-ESI-MS(n) we were able to characterize 15 phenolic compounds in L. esculentum leaves. Nine of them are reported for the first time. Some differences were found between leaves of cerasiforme and 'Bull's heart' varieties. However, in the materials of S. littoralis (larvae, adults, exuviae and excrements) reared in both L. esculentum leaves no phenolics were identified. α-Tomatine was the main glycoalkaloid in the host plant. The glycoalkaloid composition of the different S. littoralis materials was distinct, with α-tomatine and dehydrotomatine being the main detected compounds in larvae and excrements. These results add knowledge to the ecological interaction in this insect/plant duo, for which it is hard to obtain considerable sample amounts. Copyright © 2011 John Wiley & Sons, Ltd.
Annular recuperator design

DOEpatents

Kang, Yungmo

2005-10-04

An annular heat recuperator is formed with alternating hot and cold cells to separate counter-flowing hot and cold fluid streams. Each cold cell has a fluid inlet formed in the inner diameter of the recuperator near one axial end, and a fluid outlet formed in the outer diameter of the recuperator near the other axial end to evenly distribute fluid mass flow throughout the cell. Cold cells may be joined with the outlet of one cell fluidly connected to the inlet of an adjacent downstream cell to form multi-stage cells.
A 600 VOLT MULTI-STAGE, HIGH REPETITION RATE GAN FET SWITCH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frolov, D.; Pfeffer, H.; Saewert, G.

Using recently available GaN FETs, a 600 Volt three- stage, multi-FET switch has been developed having 2 nanosecond rise time driving a 200 Ohm load with the potential of approaching 30 MHz average switching rates. Possible applications include driving particle beam choppers kicking bunch-by-bunch and beam deflectors where the rise time needs to be custom tailored. This paper reports on the engineering issues addressed, the design approach taken and some performance results of this switch.
Pyrolytic graphite collector development program

NASA Technical Reports Server (NTRS)

Wilkins, W. J.

1982-01-01

Pyrolytic graphite promises to have significant advantages as a material for multistage depressed collector electrodes. Among these advantages are lighter weight, improved mechanical stiffness under shock and vibration, reduced secondary electron back-streaming for higher efficiency, and reduced outgassing at higher operating temperatures. The essential properties of pyrolytic graphite and the necessary design criteria are discussed. This includes the study of suitable electrode geometries and methods of attachment to other metal and ceramic collector components consistent with typical electrical, thermal, and mechanical requirements.
SiGe/Si Monolithically Integrated Amplifier Circuits

NASA Technical Reports Server (NTRS)

Katehi, Linda P. B.; Bhattacharya, Pallab

1998-01-01

With recent advance in the epitaxial growth of silicon-germanium heterojunction, Si/SiGe HBTs with high f(sub max) and f(sub T) have received great attention in MMIC applications. In the past year, technologies for mesa-type Si/SiGe HBTs and other lumped passive components with high resonant frequencies have been developed and well characterized for circuit applications. By integrating the micromachined lumped passive elements into HBT fabrication, multi-stage amplifiers operating at 20 GHz have been designed and fabricated.
Prevalence of abnormal eating behaviors in adolescents in Mexico: Mexican National Health and Nutrition Survey 2006.

PubMed

Barriguete-Meléndez, Jorge Armando; Unikel-Santoncini, Claudia; Aguilar-Salinas, Carlos; Córdoba-Villalobos, José Angel; Shamah, Teresa; Barquera, Simón; Rivera, Juan A; Hernández-Avila, Mauricio

2009-01-01

To describe the prevalence of abnormal eating behaviors in a population-based nationwide survey. A stratified, probabilistic, multistage design sampling process was used. The Brief Questionnaire for Risky Eating Behaviors was included in the Mexican Health and Nutrition Survey 2006 (ENSANUT 2006) and administered to participants 10-19 years old (n= 25 166). The study had the power to describe nationwide characteristics by age, regions and urban/rural settings. A high risk for having an eating disorder was found in 0.8% of the total participants (0.4% male adolescents and 1.0% female). Inhabitants in large cities showed higher risk for having an abnormal eating behavior compared to subjects living in other settings. The highest prevalences were found in males > 15 years old and females > 13 years old for all evaluated behaviors. Results show less prevalence of risky eating behaviors among adolescents in comparison to other populations. The female/male ratio was 3:1, far different from the 9:1 shown in a previous study in Mexico City, but similar to results from the US national eating disorders screening.
Demand for Dental Services in Shiraz, Iran, 2013.

PubMed

Jahromi, Negin Nassaji; Jafari, Abdosaleh; Kavosi, Zahra; Shokrpour, Nasrin; Sajjadnia, Zahra; Ravangard, Ramin

This cross-sectional and descriptive-analytic study aimed to estimate the demands for the use of dental services by Shirazi inhabitants in Iran from June 2013 to October 2013. Six hundred eighty subjects older than 18 years were selected from among the people living in Shiraz, using a multistage sampling method. The collected data were analyzed using SPSS 16.0 and Stata 11.0. The results showed that the factors affecting the number of referrals to the dental services centers and the use of these services included the age groups of 28 to 37 and 38 to 47 years, household expenses per month, and having supplementary health insurance coverage (P < .05). According to the results, in order to improve access to dental services and increase the probability of utilizing such services by people in need, the researchers recommend that the authorities should design and develop basic and supplementary health insurance plans to cover different types of dental services, allocate subsidies to dental health services, and increase the knowledge of all the people in different age groups about adherence to dental health principles and prevention of oral and dental diseases.
Loading, Release, Biodegradation, and Biocompatibility of a Nanovector Delivery System

NASA Technical Reports Server (NTRS)

Ferrai, Mauro; Tasciotti, Ennio

2012-01-01

A nanovector multistage system has been created to overcome or bypass sequential barriers within the human body, in order to deliver a therapeutic or imaging agent to a specific location. This innovation consists of a composition that includes two or more stages of particles, such that smaller, later-stage particles are contained in the larger, early-stage particles. An active agent, such as a therapeutic agent or imaging agent, is preferentially delivered and/or localized to a particular target site in the body of a subject. The multistage composition overcomes multiple biological barriers in the body. The multistage composition also allows for simultaneous delivery and localization at the same or different target sites of multiple active agents.
Limitations Of The Current State Space Modelling Approach In Multistage Machining Processes Due To Operation Variations

NASA Astrophysics Data System (ADS)

Abellán-Nebot, J. V.; Liu, J.; Romero, F.

2009-11-01

The State Space modelling approach has been recently proposed as an engineering-driven technique for part quality prediction in Multistage Machining Processes (MMP). Current State Space models incorporate fixture and datum variations in the multi-stage variation propagation, without explicitly considering common operation variations such as machine-tool thermal distortions, cutting-tool wear, cutting-tool deflections, etc. This paper shows the limitations of the current State Space model through an experimental case study where the effect of the spindle thermal expansion, cutting-tool flank wear and locator errors are introduced. The paper also discusses the extension of the current State Space model to include operation variations and its potential benefits.
Ethnic differences in bullying victimization and psychological distress: A test of an ecological model.

PubMed

Rhee, Siyon; Lee, Sei-Young; Jung, Sook-Hee

2017-10-01

This study examines ethnic differences in the prevalence of bullying victimization by peers as well as the associations between bullying victimization and psychological distress with relevant ecological factors including parental supervision, school support, and community safety. The study utilized the 2011-2012 California Health Interview Survey (CHIS) Adolescents Data, which was collected in the United States using a multi-stage stratified sampling design with a Random Digit-Dial method. The final study sample contained a total of 2367 adolescents, comprised of 48.7% Whites, followed by 35.8% Latinos, 11.1% Asians, and 4.4% African Americans. About 49.3% were males with an overall mean age of 14.6 (sd = 1.7). Results showed that there were significant differences in rates of bullying victimization among the four surveyed ethnic subgroups of adolescents. Black adolescents reported the highest and Asian adolescents the lowest level of victimization. The results of the SEM test using the calibration sample revealed an adequate fit to the data (CFI = 0.95, RMSEA = 0.04, Δχ 2 /Δdf = 2.99). Separate model tests with the four subgroups of adolescents revealed good fits with the subsample data with the exception of the subsample of African Americans. Additionally, results show that factors associated with psychological distress vary widely among the White, Latino and Asian subgroups. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.
Impacts of Long-Term Obesity on the Health Status of Samoan and Tongan Men in the United States: Results from the Pacific Islander Health Study.

PubMed

Panapasa, Sela V; McNally, James W; Heeringa, Steven G; Williams, David R

2015-08-07

To examine the impacts of long-standing obesity (BMIs ≥ 30.0 kg/m(2)) on health outcomes among Samoan and Tongan men (aged ≥ 18 years) in California using a life course perspective. Cross-sectional analysis of 103 males from the Pacific Islander Health Study (PIHS), a probability sample modeled after the National Health Interview Survey (NHIS). Urban residential neighborhoods in San Mateo and Los Angeles counties using a multistage, cluster sample design. BMI, diabetes, hypertension, total cholesterol, smoking, drinking, arthritis, gout and migraines. Bivariate analysis shows high rates of poor health outcomes distributed throughout the obese and non-obese sample. Logistic analysis finds that being obese does not significantly increase observed negative health outcomes. After controlling for socio-demographic characteristics, the presence of obesity results in non-significant findings for hypertension (OR=1.02; CI: .21, 4.91), and high cholesterol (OR=.52; CI: .10, 2.73), while obesity significantly reduces the risk of diabetes by 60% (OR=.40; CI: .14, 1.17). When applying disease counts, obese men have a significantly lower risk of reporting multiple health conditions (OR=.72; CI: .52, 1.00). Overall, the health of Samoan and Tongan males in California is uniformly poor and obesity alone does not significantly increase risks of poor health outcomes. Using a life course perspective, the analysis offers new insights on the basic health of this understudied population.
Incidence of acute occupational pesticide poisoning among male farmers in South Korea.

PubMed

Lee, Won Jin; Cha, Eun Shil; Park, Jinwoo; Ko, Yousun; Kim, Hyun Joong; Kim, Jaeyoung

2012-09-01

Pesticide poisoning from agricultural labor has been recognized as a major public health problem among farmers worldwide. The objective of this study was to examine the incidence of acute occupational pesticide poisoning among male farmers in South Korea. A nationwide sampling survey of male farmers was conducted in South Korea. This survey used a stratified multistage probability sampling design and adopted the face-to-face interview method. A total of 1,958 male farmers were interviewed in order to estimate the incidence of acute occupational pesticide poisoning in rural areas in 2010. Based on a self-reported definition, the incidence rate in 2010 and the lifetime hospitalization rate due to acute occupational pesticide poisoning among male farmers were estimated. The incidence rate of acute occupational pesticide poisoning was 24.7 (95% CI 22.1-27.2) per 100 male farmers, which corresponds to 209,512 cases across South Korea in 2010. About 12% of the pesticide poisoning cases included either visiting a medical doctor or hospitalization. The lifetime rate of hospitalization due to occupational pesticide poisoning was 6.1 (95% CI 4.9-7.3) among male farmers. Poisoning occurred mainly when farmers were applying pesticides during summer. Our nationwide sampling survey demonstrated that acute occupational pesticide poisonings are highly prevalent among male South Korean farmers. Intensive intervention efforts to reduce occupational pesticide poisoning are urgently needed in South Korea. Copyright © 2012 Wiley Periodicals, Inc.

A Study to Find Out the Full Immunization Coverage of 12 to 23-month old Children and Areas of Under-Performance using LQAS Technique in a Rural Area of Tripura.

PubMed

Datta, Anjan; Baidya, Subrata; Datta, Srabani; Mog, Chanda; Das, Shampa

2017-02-01

It is very important to analyze the factors which acts as obstacle in achieving 100% immunization among children. Lot Quality Assurance Sampling (LQAS) is one of the effective method to assess such barriers. To assess the full immunization coverage among 12 to 23-month old children of rural field practice area under Department of Community Medicine, Agartala Government Medical College and identify the factors for failure of full immunization. A community based cross-sectional study was conducted from November 2013 to October 2014 on children aged 12 to 23 months old of area under Mohanpur Community health centre. Using LQAS technique 330 samples were selected with multi-stage sampling, each sub-centre being one lot and two calculated to be the decision value. Data was collected using pre-designed pre-tested questionnaire during home visit and verifying immunization card and analysed by computer software SPSS version 21.0. The full immunization coverage among 12 to 23 months old children of Mohanpur area was found as 91.67%. Out of all the 22 sub-centres, 36.36% was found under performing as per pre-fixed criteria and the main reasons for failure of full immunization in those areas are unawareness of need of subsequent doses of vaccines and illness of the children. LQAS is an effective method to identify areas of under-performance even though overall full immunization coverage is high.
Comparative Stress Levels among Residents in Three Chinese Provincial Capitals, 2001 and 2008

PubMed Central

Yang, Tingzhong; Wu, Dan; Zhang, Weifang; Cottrell, Randall R.; Rockett, Ian R. H.

2012-01-01

Objectives To compare stress levels among residents in large Chinese cities between 2001 and 2008. Methods Survey data were collected in three mainland Chinese capital cities in two waves, in 2001 and 2008, respectively. Participants were recruited through a multi-stage stratified sampling process. Stress was assessed using the Perceived Stress Scale, Chinese version (CPSS). Descriptive methods were used to estimate mean stress levels and associated 95% confidence intervals. Estimates were adjusted by post-stratification weights. Results Indicating stable stress levels, respective adjusted mean stress scores for the combined samples of study participants were 23.90 (95%CI: 23.68–24.12) in 2001 and 23.69 (95%CI: 23.38–24.01) in 2008. A lower stress level in 2008 than in 2001 manifested among residents who were under 25 years of age; female; with a college or higher level education; divorced, widowed, or separated; members of the managerial and clerical group; students or army personnel; or with an annual income of at least 30,000 RMB. Conclusion The overall stress level did not change among the combined sample of residents in the three Chinese study cities between 2001 and 2008. However, levels remained high and varied across social strata, and may have reflected a national trend among urban residents. Findings indicate a need for a new health policy, and call for the design and implementation of evidence-based interventions that target the highest-risk groups. PMID:23152832
Condom Use at Last Sexual Intercourse and Its Correlates among Males and Females Aged 15–49 Years in Nepal

PubMed Central

Sharma, Bimala; Nam, Eun Woo

2018-01-01

This study aimed to assess the prevalence and correlates of condom use at last sexual intercourse among people aged 15–49 years in Nepal. Secondary data analysis was performed using the Nepal Demographic and Health Survey 2011. The study was restricted to the respondents who reported ever having had sexual intercourse; 9843 females and 3017 males were included. Condom use was assessed by asking if respondents used condoms in their most recent sexual intercourse. Chi-square test and multivariate logistic regression analysis were performed using Complex Sample Analysis Procedure to adjust for sample weight and multistage sampling design. Overall, 7.6% of total, and 16.3% of males and 6.2% of females reported using condoms in their last sexual intercourse. Living in Far-Western region, age and wealth quintile were positively associated with condom use in both males and females. Being unmarried was the most important predictor of condom use among males. Higher education was associated with increased likelihood of condom use in females. However, mobility, having multiple sexual partners, and HIV knowledge were not significant correlates of condom use in both sexes. A big difference was observed in the variance accounted for males and females; indicating use of condoms is poorly predicted by the variables included in the study among females. Condom use was more associated with sociodemographic factors than with sexual behavior and HIV knowledge. PMID:29547564
Optimizing Integrated Terminal Airspace Operations Under Uncertainty

NASA Technical Reports Server (NTRS)

Bosson, Christabelle; Xue, Min; Zelinski, Shannon

2014-01-01

In the terminal airspace, integrated departures and arrivals have the potential to increase operations efficiency. Recent research has developed geneticalgorithm- based schedulers for integrated arrival and departure operations under uncertainty. This paper presents an alternate method using a machine jobshop scheduling formulation to model the integrated airspace operations. A multistage stochastic programming approach is chosen to formulate the problem and candidate solutions are obtained by solving sample average approximation problems with finite sample size. Because approximate solutions are computed, the proposed algorithm incorporates the computation of statistical bounds to estimate the optimality of the candidate solutions. A proof-ofconcept study is conducted on a baseline implementation of a simple problem considering a fleet mix of 14 aircraft evolving in a model of the Los Angeles terminal airspace. A more thorough statistical analysis is also performed to evaluate the impact of the number of scenarios considered in the sampled problem. To handle extensive sampling computations, a multithreading technique is introduced.
Multi-stage flash degaser

DOEpatents

Rapier, P.M.

1980-06-26

A multi-stage flash degaser is incorporated in an energy conversion system having a direct-contact, binary-fluid heat exchanger to remove essentially all of the noncondensable gases from geothermal brine ahead of the direct-contact binary-fluid heat exchanger in order that the heat exchanger and a turbine and condenser of the system can operate at optimal efficiency.
A Multi-Stage Maturity Model for Long-Term IT Outsourcing Relationship Success

ERIC Educational Resources Information Center

Luong, Ming; Stevens, Jeff

2015-01-01

The Multi-Stage Maturity Model for Long-Term IT Outsourcing Relationship Success, a theoretical stages-of-growth model, explains long-term success in IT outsourcing relationships. Research showed the IT outsourcing relationship life cycle consists of four distinct, sequential stages: contract, transition, support, and partnership. The model was…
First demonstration of an emulsion multi-stage shifter for accelerator neutrino experiments in J-PARC T60

NASA Astrophysics Data System (ADS)

Yamada, K.; Aoki, S.; Cao, S.; Chikuma, N.; Fukuda, T.; Fukuzawa, Y.; Gonin, M.; Hayashino, T.; Hayato, Y.; Hiramoto, A.; Hosomi, F.; Inoh, T.; Iori, S.; Ishiguro, K.; Kawahara, H.; Kim, H.; Kitagawa, N.; Koga, T.; Komatani, R.; Komatsu, M.; Matsushita, A.; Mikado, S.; Minamino, A.; Mizusawa, H.; Matsumoto, T.; Matsuo, T.; Morimoto, Y.; Morishima, K.; Morishita, M.; Naganawa, N.; Nakamura, K.; Nakamura, M.; Nakamura, Y.; Nakano, T.; Nakatsuka, Y.; Nakaya, T.; Nishio, A.; Ogawa, S.; Oshima, H.; Quilain, B.; Rokujo, H.; Sato, O.; Seiya, Y.; Shibuya, H.; Shiraishi, T.; Suzuki, Y.; Tada, S.; Takahashi, S.; Yokoyama, M.; Yoshimoto, M.

2017-06-01

We describe the first ever implementation of a clock-based, multi-stage emulsion shifter in an accelerator neutrino experiment. The system was installed in the neutrino monitoring building at the Japan Proton Accelerator Research Complex as part of a test experiment, T60, and stable operation was maintained for a total of 126.6 days. By applying time information to emulsion films, various results were obtained. Time resolutions of 5.3-14.7 s were evaluated in an operation spanning 46.9 days (yielding division numbers of 1.4-3.8×105). By using timing and spatial information, reconstruction of coincident events consisting of high-multiplicity and vertex-contained events, including neutrino events, was performed. Emulsion events were matched to events observed by INGRID, one of the on-axis near detectors of the T2K experiment, with high reliability (98.5%), and hybrid analysis of the emulsion and INGRID events was established by means of the multi-stage shifter. The results demonstrate that the multi-stage shifter can feasibly be used in neutrino experiments.
The influence of the "cage effect" on the mechanism of reversible bimolecular multistage chemical reactions in solutions.

PubMed

Doktorov, Alexander B

2015-08-21

Manifestations of the "cage effect" at the encounters of reactants are theoretically treated by the example of multistage reactions in liquid solutions including bimolecular exchange reactions as elementary stages. It is shown that consistent consideration of quasi-stationary kinetics of multistage reactions (possible only in the framework of the encounter theory) for reactions proceeding near reactants contact can be made on the basis of the concepts of a "cage complex." Though mathematically such a consideration is more complicated, it is more clear from the standpoint of chemical notions. It is established that the presence of the "cage effect" leads to some important effects not inherent in reactions in gases or those in solutions proceeding in the kinetic regime, such as the appearance of new transition channels of reactant transformation that cannot be caused by elementary event of chemical conversion for the given mechanism of reaction. This results in that, for example, rate constant values of multistage reaction defined by standard kinetic equations of formal chemical kinetics from experimentally measured kinetics can differ essentially from real values of these constants.
Health condition identification of multi-stage planetary gearboxes using a mRVM-based method

NASA Astrophysics Data System (ADS)

Lei, Yaguo; Liu, Zongyao; Wu, Xionghui; Li, Naipeng; Chen, Wu; Lin, Jing

2015-08-01

Multi-stage planetary gearboxes are widely applied in aerospace, automotive and heavy industries. Their key components, such as gears and bearings, can easily suffer from damage due to tough working environment. Health condition identification of planetary gearboxes aims to prevent accidents and save costs. This paper proposes a method based on multiclass relevance vector machine (mRVM) to identify health condition of multi-stage planetary gearboxes. In this method, a mRVM algorithm is adopted as a classifier, and two features, i.e. accumulative amplitudes of carrier orders (AACO) and energy ratio based on difference spectra (ERDS), are used as the input of the classifier to classify different health conditions of multi-stage planetary gearboxes. To test the proposed method, seven health conditions of a two-stage planetary gearbox are considered and vibration data is acquired from the planetary gearbox under different motor speeds and loading conditions. The results of three tests based on different data show that the proposed method obtains an improved identification performance and robustness compared with the existing method.
Sampling bias in an international internet survey of diversion programs in the criminal justice system.

PubMed

Hartford, Kathleen; Carey, Robert; Mendonca, James

2007-03-01

Despite advances in the storage and retrieval of information within health care systems, health researchers conducting surveys for evaluations still face technical barriers that may lead to sampling bias. The authors describe their experience in administering a Web-based, international survey to English-speaking countries. Identifying the sample was a multistage effort involving (a) searching for published e-mail addresses, (b) conducting Web searches for publicly funded agencies, and (c) performing literature searches, personal contacts, and extensive Internet searches for individuals. After pretesting, the survey was converted into an electronic format accessible by multiple Web browsers. Sampling bias arose from (a) system incompatibility, which did not allow potential respondents to open the survey, (b) varying institutional gate-keeping policies that "recognized" the unsolicited survey as spam, (c) culturally unique program terminology, which confused some respondents, and (d) incomplete sampling frames. Solutions are offered to the first three problems, and the authors note that sampling bias remains a crucial problem.
Physicochemical equivalence of generic antihypertensive medicines (EQUIMEDS): protocol for a quality of medicines assessment

PubMed Central

Redfern, Julie; Adedoyin, Rufus Adesoji; Ofori, Sandra; Anchala, Raghupathy; Ajay, Vamadevan S; De Andrade, Luciano; Zelaya, Jose; Kaur, Harparkash; Balabanova, Dina; Sani, Mahmoud U

2016-01-01

Background Prevention and optimal management of hypertension in the general population is paramount to the achievement of the World Heart Federation (WHF) goal of reducing premature cardiovascular disease (CVD) mortality by 25% by the year 2025 and widespread access to good quality antihypertensive medicines is a critical component for achieving the goal. Despite research and evidence relating to other medicines such as antimalarials and antibiotics, there is very little known about the quality of generic antihypertensive medicines in low-income and middle-income countries. The aim of this study was to determine the physicochemical equivalence (percentage of active pharmaceutical ingredient, API) of generic antihypertensive medicines available in the retail market of a developing country. Methods An observational design will be adopted, which includes literature search, landscape assessment, collection and analysis of medicine samples. To determine physicochemical equivalence, a multistage sampling process will be used, including (1) identification of the 2 most commonly prescribed classes of antihypertensive medicines prescribed in Nigeria; (2) identification of a random sample of 10 generics from within each of the 2 most commonly prescribed classes; (3) a geographical representative sampling process to identify a random sample of 24 retail outlets in Nigeria; (4) representative sample purchasing, processing to assess the quality of medicines, storage and transport; and (5) assessment of the physical and chemical equivalence of the collected samples compared to the API in the relevant class. In total, 20 samples from each of 24 pharmacies will be tested (total of 480 samples). Discussion Availability of and access to quality antihypertensive medicines globally is therefore a vital strategy needed to achieve the WHF 25×25 targets. However, there is currently a scarcity of knowledge about the quality of antihypertensive medicines available in developing countries. Such information is important for enforcing and for ensuring the quality of antihypertensive medicines. PMID:28588941
Design, construction and evaluation of a 12.045 GHz, 2.0 kW-cw permanent-magnet focused klystron amplifier

NASA Technical Reports Server (NTRS)

Nishida, J. M.

1975-01-01

An analytical and experimental program to demonstrate the technical feasibility of a lightweight, high-efficiency, 1-2 kW cw, permanent magnet focused klystron operating at 12.0 GHz was described. The design is based on use of a samarium-cobalt permanent magnet for focusing of the electron beam and choice of the most optimum parameters for maximum efficiency. A filter-loaded output circuit is used for the required bandwidth. The design incorporates a collector which is demountable from the tube to facilitate multistage depressed collector experiments, permitting replacement with a NASA-designed axisymmetric, electrostatic collector for linear beam microwave tubes. A further requirement is that the focusing field between the last interaction gap and the collector decay in a prescribed manner referred to as adiabatic expansion.
Multi-objective aerodynamic shape optimization of small livestock trailers

NASA Astrophysics Data System (ADS)

Gilkeson, C. A.; Toropov, V. V.; Thompson, H. M.; Wilson, M. C. T.; Foxley, N. A.; Gaskell, P. H.

2013-11-01

This article presents a formal optimization study of the design of small livestock trailers, within which the majority of animals are transported to market in the UK. The benefits of employing a headboard fairing to reduce aerodynamic drag without compromising the ventilation of the animals' microclimate are investigated using a multi-stage process involving computational fluid dynamics (CFD), optimal Latin hypercube (OLH) design of experiments (DoE) and moving least squares (MLS) metamodels. Fairings are parameterized in terms of three design variables and CFD solutions are obtained at 50 permutations of design variables. Both global and local search methods are employed to locate the global minimum from metamodels of the objective functions and a Pareto front is generated. The importance of carefully selecting an objective function is demonstrated and optimal fairing designs, offering drag reductions in excess of 5% without compromising animal ventilation, are presented.
Genome-wide interaction study identifies RCBTB1 as a modifier for smoking effect on carotid intima-media thickness.

PubMed

Wang, Liyong; Rundek, Tatjana; Beecham, Ashley; Hudson, Barry; Blanton, Susan H; Zhao, Hongyu; Sacco, Ralph L; Dong, Chuanhui

2014-01-01

Carotid intima-media thickness (cIMT), a marker for atherosclerosis, is affected by smoking and has substantial interindividual variation. We sought to identify the genetic moderators influencing the effect of smoking on cIMT. With a multistage design using 722 379 single nucleotide polymorphisms (SNP), a genome-wide interaction study was performed in a discovery sample of 669 Hispanics, followed by replication in 589 subjects (264 Hispanics, 172 non-Hispanic blacks, 153 non-Hispanic whites). Assuming an additive genetic model, regression analysis was performed to test for smoking-SNP interaction on cIMT while controlling for age, sex, and the top 3 principal components of ancestry. The strongest interaction in Hispanics was found with a synonymous splicing SNP (rs3751383) in exon 9 of RCBTB1 (P=2.5e(-6) in discovery sample; P=0.01 in the Hispanic replication sample; P<8.8e(-9) in the combined Hispanic sample). Stratification analysis in the combined Hispanic sample showed that smoking had no effect on cIMT among rs3751383 G homozygote (P=0.15), a moderate effect among rs3751383 heterozygote (P=0.01), and a strong effect among rs3751383 A homozygote (P=2.1e(-7)). A consistent trend was observed in the non-Hispanic white and black data sets, leading to an interaction effect of P<2.9e(-9) in the meta-analysis of all 1258 subjects. Our study represents the first genome-wide smoking-SNP interaction study of cIMT and identifies RCBTB1 as a modifier of the smoking effect on cIMT. Testing for gene-environment interactions can help uncover genetic factors that contribute to the interindividual variation in response to the same environmental exposure.
Attitudes towards smoking restrictions and tobacco advertisement bans in Georgia.

PubMed

Bakhturidze, George D; Mittelmark, Maurice B; Aarø, Leif E; Peikrishvili, Nana T

2013-11-25

This study aims to provide data on a public level of support for restricting smoking in public places and banning tobacco advertisements. A nationally representative multistage sampling design, with sampling strata defined by region (sampling quotas proportional to size) and substrata defined by urban/rural and mountainous/lowland settlement, within which census enumeration districts were randomly sampled, within which households were randomly sampled, within which a randomly selected respondent was interviewed. The country of Georgia, population 4.7 million, located in the Caucasus region of Eurasia. One household member aged between 13 and 70 was selected as interviewee. In households with more than one age-eligible person, selection was carried out at random. Of 1588 persons selected, 14 refused to participate and interviews were conducted with 915 women and 659 men. Respondents were interviewed about their level of agreement with eight possible smoking restrictions/bans, used to calculate a single dichotomous (agree/do not agree) opinion indicator. The level of agreement with restrictions was analysed in bivariate and multivariate analyses by age, gender, education, income and tobacco use status. Overall, 84.9% of respondents indicated support for smoking restrictions and tobacco advertisement bans. In all demographic segments, including tobacco users, the majority of respondents indicated agreement with restrictions, ranging from a low of 51% in the 13-25 age group to a high of 98% in the 56-70 age group. Logistic regression with all demographic variables entered showed that agreement with restrictions was higher with age, and was significantly higher among never smokers as compared to daily smokers. Georgian public opinion is normatively supportive of more stringent tobacco-control measures in the form of smoking restrictions and tobacco advertisement bans.
Effect of sampling volume on dry powder inhaler (DPI)-emitted aerosol aerodynamic particle size distributions (APSDs) measured by the Next-Generation Pharmaceutical Impactor (NGI) and the Andersen eight-stage cascade impactor (ACI).

PubMed

Mohammed, Hlack; Roberts, Daryl L; Copley, Mark; Hammond, Mark; Nichols, Steven C; Mitchell, Jolyon P

2012-09-01

Current pharmacopeial methods for testing dry powder inhalers (DPIs) require that 4.0 L be drawn through the inhaler to quantify aerodynamic particle size distribution of "inhaled" particles. This volume comfortably exceeds the internal dead volume of the Andersen eight-stage cascade impactor (ACI) and Next Generation pharmaceutical Impactor (NGI) as designated multistage cascade impactors. Two DPIs, the second (DPI-B) having similar resistance than the first (DPI-A) were used to evaluate ACI and NGI performance at 60 L/min following the methodology described in the European and United States Pharmacopeias. At sampling times ≥2 s (equivalent to volumes ≥2.0 L), both impactors provided consistent measures of therapeutically important fine particle mass (FPM) from both DPIs, independent of sample duration. At shorter sample times, FPM decreased substantially with the NGI, indicative of incomplete aerosol bolus transfer through the system whose dead space was 2.025 L. However, the ACI provided consistent measures of both variables across the range of sampled volumes evaluated, even when this volume was less than 50% of its internal dead space of 1.155 L. Such behavior may be indicative of maldistribution of the flow profile from the relatively narrow exit of the induction port to the uppermost stage of the impactor at start-up. An explanation of the ACI anomalous behavior from first principles requires resolution of the rapidly changing unsteady flow and pressure conditions at start up, and is the subject of ongoing research by the European Pharmaceutical Aerosol Group. Meanwhile, these experimental findings are provided to advocate a prudent approach by retaining the current pharmacopeial methodology.
Talent identification model for sprinter using discriminant factor

NASA Astrophysics Data System (ADS)

Kusnanik, N. W.; Hariyanto, A.; Herdyanto, Y.; Satia, A.

2018-01-01

The main purpose of this study was to identify young talented sprinter using discriminant factor. The research was conducted in 3 steps including item pool, screening of item pool, and trial of instruments at the small and big size of samples. 315 male elementary school students participated in this study with mean age of 11-13 years old. Data were collected by measuring anthropometry (standing height, sitting height, body mass, and leg length); testing physical fitness (40m sprint for speed, shuttle run for agility, standing broad jump for power, multistage fitness test for endurance). Data were analyzed using discriminant factor. The result of this study found that there were 5 items that selected as an instrument to identify young talented sprinter: sitting height, body mass, leg length, sprint 40m, and multistage fitness test. Model of Discriminant for talent identification in sprinter was D = -24,497 + (0,155 sitting height) + (0,080 body mass) + (0,148 leg length) + (-1,225 Sprint 40m) + (0,563 MFT). The conclusion of this study: instrument tests that have been selected and discriminant model that have been found can be applied to identify young talented as a sprinter.
Method of and apparatus for testing the integrity of filters

DOEpatents

Herman, R.L.

1985-05-07

A method of and apparatus are disclosed for testing the integrity of individual filters or filter stages of a multistage filtering system including a diffuser permanently mounted upstream and/or downstream of the filter stage to be tested for generating pressure differentials to create sufficient turbulence for uniformly dispersing trace agent particles within the airstream upstream and downstream of such filter stage. Samples of the particle concentration are taken upstream and downstream of the filter stage for comparison to determine the extent of particle leakage past the filter stage. 5 figs.
Method of and apparatus for testing the integrity of filters

DOEpatents

Herman, Raymond L [Richland, WA

1985-01-01

A method of and apparatus for testing the integrity of individual filters or filter stages of a multistage filtering system including a diffuser permanently mounted upstream and/or downstream of the filter stage to be tested for generating pressure differentials to create sufficient turbulence for uniformly dispersing trace agent particles within the airstream upstream and downstream of such filter stage. Samples of the particle concentration are taken upstream and downstream of the filter stage for comparison to determine the extent of particle leakage past the filter stage.
Methods of and apparatus for testing the integrity of filters

DOEpatents

Herman, R.L.

1984-01-01

A method of and apparatus for testing the integrity of individual filters or filter stages of a multistage filtering system including a diffuser permanently mounted upstream and/or downstream of the filter stage to be tested for generating pressure differentials to create sufficient turbulence for uniformly dispersing trace agent particles within the airstram upstream and downstream of such filter stage. Samples of the particel concentration are taken upstream and downstream of the filter stage for comparison to determine the extent of particle leakage past the filter stage.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.