Measured Effect of Sexual Activities, Alcohol Consumption, Smoking and Aggression on Health Risk of Students in Rural Communities in Ikenne, Nigeria

ERIC Educational Resources Information Center

Ezeokoli, Rita; Ofole, Ndidi M.

2015-01-01

This study examined the joint and relative contribution of sexual activities, alcohol consumption, smoking and aggression to the prediction of health risk of students in rural communities in Ogun State. Descriptive research design of correlational type was adopted. Multi-stage sampling Technique was used to draw 300 respondents from an…

Purification and Quantification of an Isomeric Compound in a Mixture by Collisional Excitation in Multistage Mass Spectrometry Experiments.

PubMed

Jeanne Dit Fouque, Dany; Maroto, Alicia; Memboeuf, Antony

2016-11-15

The differentiation, characterization, and quantification of isomers and/or isobars in mixtures is a recurrent problem in mass spectrometry and more generally in analytical chemistry. Here we present a new strategy to assess the purity of a compound that is susceptible to be contaminated with another isomeric side-product in trace levels. Providing one of the isomers is available as pure sample, this new strategy allows the detection of isomeric contamination. This is done thanks to a "gas-phase collisional purification" inside an ion trap mass spectrometer paving the way for an improved analysis of at least similar samples. This strategy consists in using collision induced dissociation (CID) multistage mass spectrometry (MS 2 and MS 3 ) experiments and the survival yield (SY) technique. It has been successfully applied to mixtures of cyclic poly( L -lactide) (PLA) with increasing amounts of its linear topological isomer. Purification in gas phase of PLA mixtures was established based on SY curves obtained in MS 3 mode: all samples gave rise to the same SY curve corresponding then to the pure cyclic component. This new strategy was sensitive enough to detect traces of linear PLA (<3%) in a sample of cyclic PLA that was supposedly pure according to other characterization techniques ( 1 H NMR, MALDI-HRMS, and size-exclusion chromatography). Moreover, in this case, the presence of linear isomer was undetectable according to MS/MS or MS/MS/MS analysis only as fragment ions are also of the same m/z values. This type of approach could easily be implemented in hyphenated mass spectrometric techniques to improve the structural and quantitative analysis of complex samples.

Planning and processing multistage samples with a computer program—MUST.

Treesearch

John W. Hazard; Larry E. Stewart

1974-01-01

A computer program was written to handle multistage sampling designs in insect populations. It is, however, general enough to be used for any population where the number of stages does not exceed three. The program handles three types of sampling situations, all of which assume equal probability sampling. Option 1 takes estimates of sample variances, costs, and either...

Teacher Self-Efficacy Enhancement and School Location: Implication for Students' Achievement in Economics in Senior Secondary School in Ibadan, Oyo State, Nigeria

ERIC Educational Resources Information Center

Durowoju, Esther O.; Onuka, Adams O. U.

2015-01-01

The paper investigated the effect of teacher self-efficacy enhancement and school location on students' achievement in Economics in Senior Secondary School in Ibadan Metropolis of Oyo State, Nigeria. Three hypotheses were tested at 0.05 level of significance. Multi-stage sampling technique was adopted in the study. Four Local Government Areas (two…

Statistical methods for efficient design of community surveys of response to noise: Random coefficients regression models

NASA Technical Reports Server (NTRS)

Tomberlin, T. J.

1985-01-01

Research studies of residents' responses to noise consist of interviews with samples of individuals who are drawn from a number of different compact study areas. The statistical techniques developed provide a basis for those sample design decisions. These techniques are suitable for a wide range of sample survey applications. A sample may consist of a random sample of residents selected from a sample of compact study areas, or in a more complex design, of a sample of residents selected from a sample of larger areas (e.g., cities). The techniques may be applied to estimates of the effects on annoyance of noise level, numbers of noise events, the time-of-day of the events, ambient noise levels, or other factors. Methods are provided for determining, in advance, how accurately these effects can be estimated for different sample sizes and study designs. Using a simple cost function, they also provide for optimum allocation of the sample across the stages of the design for estimating these effects. These techniques are developed via a regression model in which the regression coefficients are assumed to be random, with components of variance associated with the various stages of a multi-stage sample design.

Multistage, multiseasonal and multiband imagery to identify and qualify non-forest vegetation resources

NASA Technical Reports Server (NTRS)

Driscoll, R. S.; Francis, R. E.

1970-01-01

A description of space and supporting aircraft photography for the interpretation and analyses of non-forest (shrubby and herbaceous) native vegetation is presented. The research includes the development of a multiple sampling technique to assign quantitative area values of specific plant community types included within an assigned space photograph map unit. Also, investigations of aerial film type, scale, and season of photography for identification and quantity measures of shrubby and herbaceous vegetation were conducted. Some work was done to develop automated interpretation techniques with film image density measurement devices.

Multistage open-tube trap for enrichment of part-per-trillion trace components of low-pressure (below 27-kPa) air samples

NASA Technical Reports Server (NTRS)

Ohara, D.; Vo, T.; Vedder, J. F.

1985-01-01

A multistage open-tube trap for cryogenic collection of trace components in low-pressure air samples is described. The open-tube design allows higher volumetric flow rates than densely packed glass-bead traps commonly reported and is suitable for air samples at pressures below 27 kPa with liquid nitrogen as the cryogen. Gas blends containing 200 to 2500 parts per trillion by volume each of ethane and ethene were sampled and hydrocarbons were enriched with 100 + or - 4 percent trap efficiency. The multistage design is more efficient than equal-length open-tube traps under the conditions of the measurements.

Remote sensing of effects of land-use practices on water quality. [environmental surveys using Landsat satellites

NASA Technical Reports Server (NTRS)

Graves, D. H.

1975-01-01

Research efforts are presented for the use of remote sensing in environmental surveys in Kentucky. Ground truth parameters were established that represent the vegetative cover of disturbed and undisturbed watersheds in the Cumberland Plateau of eastern Kentucky. Several water quality parameters were monitored of the watersheds utilized in the establishment of ground truth data. The capabilities of multistage-multispectral aerial photography and satellite imagery were evaluated in detecting various land use practices. The use of photographic signatures of known land use areas utilizing manually-operated spot densitometers was studied. The correlation of imagery signature data to water quality data was examined. Potential water quality predictions were developed from forested and nonforested watersheds based upon the above correlations. The cost effectiveness of predicting water quality values was evaluated using multistage and satellite imagery sampling techniques.

A Multistage Approach for Image Registration.

PubMed

Bowen, Francis; Hu, Jianghai; Du, Eliza Yingzi

2016-09-01

Successful image registration is an important step for object recognition, target detection, remote sensing, multimodal content fusion, scene blending, and disaster assessment and management. The geometric and photometric variations between images adversely affect the ability for an algorithm to estimate the transformation parameters that relate the two images. Local deformations, lighting conditions, object obstructions, and perspective differences all contribute to the challenges faced by traditional registration techniques. In this paper, a novel multistage registration approach is proposed that is resilient to view point differences, image content variations, and lighting conditions. Robust registration is realized through the utilization of a novel region descriptor which couples with the spatial and texture characteristics of invariant feature points. The proposed region descriptor is exploited in a multistage approach. A multistage process allows the utilization of the graph-based descriptor in many scenarios thus allowing the algorithm to be applied to a broader set of images. Each successive stage of the registration technique is evaluated through an effective similarity metric which determines subsequent action. The registration of aerial and street view images from pre- and post-disaster provide strong evidence that the proposed method estimates more accurate global transformation parameters than traditional feature-based methods. Experimental results show the robustness and accuracy of the proposed multistage image registration methodology.

Sampling Methods in Cardiovascular Nursing Research: An Overview.

PubMed

Kandola, Damanpreet; Banner, Davina; O'Keefe-McCarthy, Sheila; Jassal, Debbie

2014-01-01

Cardiovascular nursing research covers a wide array of topics from health services to psychosocial patient experiences. The selection of specific participant samples is an important part of the research design and process. The sampling strategy employed is of utmost importance to ensure that a representative sample of participants is chosen. There are two main categories of sampling methods: probability and non-probability. Probability sampling is the random selection of elements from the population, where each element of the population has an equal and independent chance of being included in the sample. There are five main types of probability sampling including simple random sampling, systematic sampling, stratified sampling, cluster sampling, and multi-stage sampling. Non-probability sampling methods are those in which elements are chosen through non-random methods for inclusion into the research study and include convenience sampling, purposive sampling, and snowball sampling. Each approach offers distinct advantages and disadvantages and must be considered critically. In this research column, we provide an introduction to these key sampling techniques and draw on examples from the cardiovascular research. Understanding the differences in sampling techniques may aid nurses in effective appraisal of research literature and provide a reference pointfor nurses who engage in cardiovascular research.

"MSTGen": Simulated Data Generator for Multistage Testing

ERIC Educational Resources Information Center

Han, Kyung T.

2013-01-01

Multistage testing, or MST, was developed as an alternative to computerized adaptive testing (CAT) for applications in which it is preferable to administer a test at the level of item sets (i.e., modules). As with CAT, the simulation technique in MST plays a critical role in the development and maintenance of tests. "MSTGen," a new MST…

Five decades of promotion techniques in cigarette advertising: a longitudinal content analysis.

PubMed

Paek, Hye-Jin; Reid, Leonard N; Jeong, Hyun Ju; Choi, Hojoon; Krugman, Dean

2012-01-01

This study examines frequencies and types of promotion techniques featured in five decades of cigarette advertising relative to five major smoking eras. Analysis of 1,133 cigarette advertisements collected through multistage sampling of 1954 through 2003 issues of three youth-oriented magazines found that 7.6% of the analyzed ads featured at least one promotion technique. Across smoking eras the proportion of promotion in the ads steadily increased from 1.6% in the "pre-broadcast ban era" to 10.9% in the "the pre-Master Settlement Agreement (MSA) era" and 9% in "post-MSA era." The increased use of sponsorships/events in cigarette ads for youth-oriented brands warrants more attention from tobacco control experts and government regulators.

Analysis of non-enzymatically glycated peptides: neutral-loss-triggered MS3 versus multi-stage activation tandem mass spectrometry

PubMed Central

Zhang, Qibin; Petyuk, Vladislav A.; Schepmoes, Athena A.; Orton, Daniel J.; Monroe, Matthew E.; Yang, Feng; Smith, Richard D.; Metz, Thomas O.

2009-01-01

Non-enzymatic glycation of tissue proteins has important implications in the development of complications of diabetes mellitus. While electron transfer dissociation (ETD) has been shown to outperform collision-induced dissociation (CID) in sequencing glycated peptides by tandem mass spectrometry, ETD instrumentation is not yet widely available and often suffers from significantly lower sensitivity than CID. In this study, we evaluated different advanced CID techniques (i.e., neutral-loss-triggered MS3 and multi-stage activation) during liquid chromatography/multi-stage mass spectrometric (LC/MSn) analyses of Amadori-modified peptides enriched from human serum glycated in vitro. During neutral-loss-triggered MS3 experiments, MS3 scans triggered by neutral losses of 3 H2O or 3 H2O + HCHO produced similar results in terms of glycated peptide identifications. However, neutral losses of 3 H2O resulted in significantly more glycated peptide identifications during multi-stage activation experiments. Overall, the multi-stage activation approach produced more glycated peptide identifications, while the neutral-loss-triggered MS3 approach resulted in much higher specificity. Both techniques are viable alternatives to ETD for identifying glycated peptides. PMID:18763275

Numerical solutions of 2-D multi-stage rotor/stator unsteady flow interactions

NASA Astrophysics Data System (ADS)

Yang, R.-J.; Lin, S.-J.

1991-01-01

The Rai method of single-stage rotor/stator flow interaction is extended to handle multistage configurations. In this study, a two-dimensional Navier-Stokes multi-zone approach was used to investigate unsteady flow interactions within two multistage axial turbines. The governing equations are solved by an iterative, factored, implicit finite-difference, upwind algorithm. Numerical accuracy is checked by investigating the effect of time step size, the effect of subiteration in the Newton-Raphson technique, and the effect of full viscous versus thin-layer approximation. Computer results compared well with experimental data. Unsteady flow interactions, wake cutting, and the associated evolution of vortical entities are discussed.

Dynamic analysis for solid waste management systems: an inexact multistage integer programming approach.

PubMed

Li, Yongping; Huang, Guohe

2009-03-01

In this study, a dynamic analysis approach based on an inexact multistage integer programming (IMIP) model is developed for supporting municipal solid waste (MSW) management under uncertainty. Techniques of interval-parameter programming and multistage stochastic programming are incorporated within an integer-programming framework. The developed IMIP can deal with uncertainties expressed as probability distributions and interval numbers, and can reflect the dynamics in terms of decisions for waste-flow allocation and facility-capacity expansion over a multistage context. Moreover, the IMIP can be used for analyzing various policy scenarios that are associated with different levels of economic consequences. The developed method is applied to a case study of long-term waste-management planning. The results indicate that reasonable solutions have been generated for binary and continuous variables. They can help generate desired decisions of system-capacity expansion and waste-flow allocation with a minimized system cost and maximized system reliability.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Qibin; Petyuk, Vladislav A.; Schepmoes, Athena A.

Non-enzymatic glycation of tissue proteins has important implications in the development of complications of diabetes mellitus. While electron transfer dissociation (ETD) has been shown to outperform collision-induced dissociation (CID) in sequencing glycated peptides by tandem mass spectrometry, ETD instrumentation is not yet available in all laboratories. In this study, we evaluated different advanced CID techniques (i.e., neutral-loss triggered MS3 and multi-stage activation) during LC-MSn analyses of Amadori-modified peptides enriched from human serum glycated in vitro. During neutral-loss triggered MS3 experiments, MS3 scans triggered by neutral-losses of 3 H2O or 3 H2O + HCHO produced similar results in terms of glycatedmore » peptide identifications. However, neutral losses of 3 H2O resulted in significantly more glycated peptide identifications during multi-stage activation experiments. Overall, the multi-stage activation approach produced more glycated peptide identifications, while the neutral-loss triggered MS3 approach resulted in much higher specificity. Both techniques offer a viable alternative to ETD for identifying glycated peptides when that method is unavailable.« less

Disdrometer-based C-Band Radar Quantitative Precipitation Estimation (QPE) in a highly complex terrain region in tropical Colombia.

NASA Astrophysics Data System (ADS)

Sepúlveda, J.; Hoyos Ortiz, C. D.

2017-12-01

An adequate quantification of precipitation over land is critical for many societal applications including agriculture, hydroelectricity generation, water supply, and risk management associated with extreme events. The use of rain gauges, a traditional method for precipitation estimation, and an excellent one, to estimate the volume of liquid water during a particular precipitation event, does not allow to fully capture the highly spatial variability of the phenomena which is a requirement for almost all practical applications. On the other hand, the weather radar, an active remote sensing sensor, provides a proxy for rainfall with fine spatial resolution and adequate temporary sampling, however, it does not measure surface precipitation. In order to fully exploit the capabilities of the weather radar, it is necessary to develop quantitative precipitation estimation (QPE) techniques combining radar information with in-situ measurements. Different QPE methodologies are explored and adapted to local observations in a highly complex terrain region in tropical Colombia using a C-Band radar and a relatively dense network of rain gauges and disdrometers. One important result is that the expressions reported in the literature for extratropical locations are not representative of the conditions found in the tropical region studied. In addition to reproducing the state-of-the-art techniques, a new multi-stage methodology based on radar-derived variables and disdrometer data is proposed in order to achieve the best QPE possible. The main motivation for this new methodology is based on the fact that most traditional QPE methods do not directly take into account the different uncertainty sources involved in the process. The main advantage of the multi-stage model compared to traditional models is that it allows assessing and quantifying the uncertainty in the surface rain rate estimation. The sub-hourly rainfall estimations using the multi-stage methodology are realistic compared to observed data in spite of the many sources of uncertainty including the sampling volume, the different physical principles of the sensors, the incomplete understanding of the microphysics of precipitation and, the most important, the rapidly varying droplet size distribution.

Limitations Of The Current State Space Modelling Approach In Multistage Machining Processes Due To Operation Variations

NASA Astrophysics Data System (ADS)

Abellán-Nebot, J. V.; Liu, J.; Romero, F.

2009-11-01

The State Space modelling approach has been recently proposed as an engineering-driven technique for part quality prediction in Multistage Machining Processes (MMP). Current State Space models incorporate fixture and datum variations in the multi-stage variation propagation, without explicitly considering common operation variations such as machine-tool thermal distortions, cutting-tool wear, cutting-tool deflections, etc. This paper shows the limitations of the current State Space model through an experimental case study where the effect of the spindle thermal expansion, cutting-tool flank wear and locator errors are introduced. The paper also discusses the extension of the current State Space model to include operation variations and its potential benefits.

Thermal analysis applied to irradiated propolis

NASA Astrophysics Data System (ADS)

Matsuda, Andrea Harumi; Machado, Luci Brocardo; del Mastro, Nélida Lucia

2002-03-01

Propolis is a resinous hive product, collected by bees. Raw propolis requires a decontamination procedure and irradiation appears as a promising technique for this purpose. The valuable properties of propolis for food and pharmaceutical industries have led to increasing interest in its technological behavior. Thermal analysis is a chemical analysis that gives information about changes on heating of great importance for technological applications. Ground propolis samples were 60Co gamma irradiated with 0 and 10 kGy. Thermogravimetry curves shown a similar multi-stage decomposition pattern for both irradiated and unirradiated samples up to 600°C. Similarly, through differential scanning calorimetry , a coincidence of melting point of irradiated and unirradiated samples was found. The results suggest that the irradiation process do not interfere on the thermal properties of propolis when irradiated up to 10 kGy.

Diabat Interpolation for Polymorph Free-Energy Differences.

PubMed

Kamat, Kartik; Peters, Baron

2017-02-02

Existing methods to compute free-energy differences between polymorphs use harmonic approximations, advanced non-Boltzmann bias sampling techniques, and/or multistage free-energy perturbations. This work demonstrates how Bennett's diabat interpolation method ( J. Comput. Phys. 1976, 22, 245 ) can be combined with energy gaps from lattice-switch Monte Carlo techniques ( Phys. Rev. E 2000, 61, 906 ) to swiftly estimate polymorph free-energy differences. The new method requires only two unbiased molecular dynamics simulations, one for each polymorph. To illustrate the new method, we compute the free-energy difference between face-centered cubic and body-centered cubic polymorphs for a Gaussian core solid. We discuss the justification for parabolic models of the free-energy diabats and similarities to methods that have been used in studies of electron transfer.

Efficient design and inference for multistage randomized trials of individualized treatment policies.

PubMed

Dawson, Ree; Lavori, Philip W

2012-01-01

Clinical demand for individualized "adaptive" treatment policies in diverse fields has spawned development of clinical trial methodology for their experimental evaluation via multistage designs, building upon methods intended for the analysis of naturalistically observed strategies. Because often there is no need to parametrically smooth multistage trial data (in contrast to observational data for adaptive strategies), it is possible to establish direct connections among different methodological approaches. We show by algebraic proof that the maximum likelihood (ML) and optimal semiparametric (SP) estimators of the population mean of the outcome of a treatment policy and its standard error are equal under certain experimental conditions. This result is used to develop a unified and efficient approach to design and inference for multistage trials of policies that adapt treatment according to discrete responses. We derive a sample size formula expressed in terms of a parametric version of the optimal SP population variance. Nonparametric (sample-based) ML estimation performed well in simulation studies, in terms of achieved power, for scenarios most likely to occur in real studies, even though sample sizes were based on the parametric formula. ML outperformed the SP estimator; differences in achieved power predominately reflected differences in their estimates of the population mean (rather than estimated standard errors). Neither methodology could mitigate the potential for overestimated sample sizes when strong nonlinearity was purposely simulated for certain discrete outcomes; however, such departures from linearity may not be an issue for many clinical contexts that make evaluation of competitive treatment policies meaningful.

The Empirical Selection of Anchor Items Using a Multistage Approach

ERIC Educational Resources Information Center

Craig, Brandon

2017-01-01

The purpose of this study was to determine if using a multistage approach for the empirical selection of anchor items would lead to more accurate DIF detection rates than the anchor selection methods proposed by Kopf, Zeileis, & Strobl (2015b). A simulation study was conducted in which the sample size, percentage of DIF, and balance of DIF…

SSAIS: A Program to Assess Adverse Impact in Multistage Selection Decisions

ERIC Educational Resources Information Center

De Corte, Wilfried

2004-01-01

The article describes a Windows program to estimate the expected value and sampling distribution function of the adverse impact ratio for general multistage selections. The results of the program can also be used to predict the risk that a future selection decision will result in an outcome that reflects the presence of adverse impact. The method…

Speech coding at low to medium bit rates

NASA Astrophysics Data System (ADS)

Leblanc, Wilfred Paul

1992-09-01

Improved search techniques coupled with improved codebook design methodologies are proposed to improve the performance of conventional code-excited linear predictive coders for speech. Improved methods for quantizing the short term filter are developed by employing a tree search algorithm and joint codebook design to multistage vector quantization. Joint codebook design procedures are developed to design locally optimal multistage codebooks. Weighting during centroid computation is introduced to improve the outlier performance of the multistage vector quantizer. Multistage vector quantization is shown to be both robust against input characteristics and in the presence of channel errors. Spectral distortions of about 1 dB are obtained at rates of 22-28 bits/frame. Structured codebook design procedures for excitation in code-excited linear predictive coders are compared to general codebook design procedures. Little is lost using significant structure in the excitation codebooks while greatly reducing the search complexity. Sparse multistage configurations are proposed for reducing computational complexity and memory size. Improved search procedures are applied to code-excited linear prediction which attempt joint optimization of the short term filter, the adaptive codebook, and the excitation. Improvements in signal to noise ratio of 1-2 dB are realized in practice.

Hypoplastic left heart syndrome - a review of supportive percutaneous treatment.

PubMed

Moszura, Tomasz; Góreczny, Sebastian; Dryżek, Paweł

2014-01-01

Due to the complex anatomical and haemodynamic consequences of hypoplastic left heart syndrome (HLHS), patients with the condition require multistage surgical and supportive interventional treatment. Percutaneous interventions may be required between each stage of surgical palliation, sometimes simultaneously with surgery as hybrid interventions, or after completion of multistage treatment. Recent advances in the field of interventional cardiology, including new devices and techniques, have significantly contributed to improving results of multistage HLHS palliation. Knowledge of the potential interventional options as well as the limitation of percutaneous interventions will enable the creation of safe and effective treatment protocols in this highly challenging group of patients. In this comprehensive review we discuss the types, goals, and potential complications of transcatheter interventions in patients with HLHS.

Remote sensing advances in agricultural inventories

NASA Technical Reports Server (NTRS)

Dragg, J. L.; Bizzell, R. M.; Trichel, M. C.; Hatch, R. E.; Phinney, D. E.; Baker, T. C.

1984-01-01

As the complexity of the world's agricultural industry increases, more timely and more accurate world-wide agricultural information is required to support production and marketing decisions, policy formulation, and technology development. The Inventory Technology Development Project of the AgRISTARS Program has developed new automated technology that uses data sets acquired by spaceborne remote sensors. Research has emphasized the development of multistage, multisensor sampling and estimation techniques for use in global environments where reliable ground observations are not available. This paper presents research results obtained from data sets acquired by four different sensors: Landsat MSS, Landsat TM, Shuttle-Imaging Radar and environmental satellite (AVHRR).

The influence of microwave-assisted drying techniques on the rehydration behavior of blueberries (Vaccinium corymbosum L.).

PubMed

Zielinska, Magdalena; Markowski, Marek

2016-04-01

The aim of this study was to determine the effect of: (a) different drying methods, (b) hot air temperature in a convection oven, and (c) the moisture content of fruits dehydrated by multi-stage drying which involves a transition between different stages of drying, on the rehydration kinetics of dry blueberries. Models describing rehydration kinetics were also studied. Blueberries dehydrated by multi-stage microwave-assisted drying, which involved a hot air pre-drying step at 80 °C until the achievement of a moisture content of 1.95 kg H2O kg(-1)DM, were characterized by significantly higher rates of initial and successive rehydration as well as smaller initial loss of soluble solids in comparison with the samples dried by other methods. The highest initial rehydration rate and the smallest loss of soluble solids after 30 min of soaking were determined at 0.46 min(-1) and 0.29 kg DM kg(-1)DM, respectively. The Peleg model and the first-order-kinetic model fit the experimental data well. Copyright © 2015 Elsevier Ltd. All rights reserved.

A sampling procedure to guide the collection of narrow-band, high-resolution spatially and spectrally representative reflectance data. [satellite imagery of earth resources

NASA Technical Reports Server (NTRS)

Brand, R. R.; Barker, J. L.

1983-01-01

A multistage sampling procedure using image processing, geographical information systems, and analytical photogrammetry is presented which can be used to guide the collection of representative, high-resolution spectra and discrete reflectance targets for future satellite sensors. The procedure is general and can be adapted to characterize areas as small as minor watersheds and as large as multistate regions. Beginning with a user-determined study area, successive reductions in size and spectral variation are performed using image analysis techniques on data from the Multispectral Scanner, orbital and simulated Thematic Mapper, low altitude photography synchronized with the simulator, and associated digital data. An integrated image-based geographical information system supports processing requirements.

Relative importance index (RII) in ranking of procrastination factors among university students

NASA Astrophysics Data System (ADS)

Aziz, Nazrina; Zain, Zakiyah; Mafuzi, Raja Muhammad Zahid Raja; Mustapa, Aini Mastura; Najib, Nur Hasibah Mohd; Lah, Nik Fatihah Nik

2016-08-01

Procrastination is the action of delaying or postponing something such as making a decision or starting or completing some tasks or activities. According to previous studies, students who have a strong tendency to procrastinate get low scores in their tests, resulting in poorer academic performance compared to those who do not procrastinate. This study aims to identify the procrastination factors in completing assignments among three groups of undergraduate students. The relative importance of procrastination factors was quantified by the relative importance index (RII) method prior to ranking. A multistage sampling technique was used in selecting the sample. The findings revealed that `too many works in one time' is one of the top three factors contributing to procrastination in all groups.

Optimizing Integrated Terminal Airspace Operations Under Uncertainty

NASA Technical Reports Server (NTRS)

Bosson, Christabelle; Xue, Min; Zelinski, Shannon

2014-01-01

In the terminal airspace, integrated departures and arrivals have the potential to increase operations efficiency. Recent research has developed geneticalgorithm- based schedulers for integrated arrival and departure operations under uncertainty. This paper presents an alternate method using a machine jobshop scheduling formulation to model the integrated airspace operations. A multistage stochastic programming approach is chosen to formulate the problem and candidate solutions are obtained by solving sample average approximation problems with finite sample size. Because approximate solutions are computed, the proposed algorithm incorporates the computation of statistical bounds to estimate the optimality of the candidate solutions. A proof-ofconcept study is conducted on a baseline implementation of a simple problem considering a fleet mix of 14 aircraft evolving in a model of the Los Angeles terminal airspace. A more thorough statistical analysis is also performed to evaluate the impact of the number of scenarios considered in the sampled problem. To handle extensive sampling computations, a multithreading technique is introduced.

The feasibility study of 177Lu production in Miniature Neutron Source Reactors using a multi-stage approach in Isfahan, Iran.

PubMed

Golabian, A; Hosseini, M A; Ahmadi, M; Soleimani, B; Rezvanifard, M

2018-01-01

Miniature neutron source reactors (MNSRs) are among the safest and economic research reactors with potentials to be used for neutron studies. This manuscript explores the feasibility of 177 Lu production in Isfahan MNSR reactor using direct production route. In this study, to assess the specific activity of the produced radioisotope, a simulation was carried out through the MCNPX2.6 code. The simulation was validated by irradiating a lutetium disc-like (99.98 chemical purity) at the thermal neutron flux of 5 × 10 11 ncm 2 s -1 and an irradiation time of 4min. After the spectrometry of the irradiated sample, the experimental results of 177 Lu production were compared with the simulation results. In addition, factor from the simulation was extracted by replacing it in the related equations in order to calculate specific activity through a multi-stage approach, and by using different irradiation techniques. The results showed that the simulation technique designed in this study is in agreement with the experimental approach (with a difference of approximately 3%). It was also found that the maximum 177 Lu production at the maximum flux and irradiation time allows access to 723.5mCi/g after 27 cycles. Furthermore, the comparison of irradiation techniques showed that increasing the irradiation time is more effective in 177 Lu production efficiency than increasing the number of irradiation cycles. In a way that increasing the irradiation time would postpone the saturation of the productions. On the other hand, it was shown that the choice of an appropriate irradiation technique for 177 Lu production can be economically important in term of the effective fuel consumption in the reactor. Copyright © 2017 Elsevier Ltd. All rights reserved.

Community Health Centers: Providers, Patients, and Content of Care

MedlinePlus

... Statistics (NCHS). NAMCS uses a multistage probability sample design involving geographic primary sampling units (PSUs), physician practices ... 05 level. To account for the complex sample design during variance estimation, all analyses were performed using ...

Effectiveness of brain-based learning and animated cartoons for enhancing healthy habits among school children in Khon Kaen, Thailand.

PubMed

Banchonhattakit, Pannee; Duangsong, Rujira; Muangsom, Niramon; Kamsong, Theppamon; Phangwan, Krittiya

2015-03-01

The objective of this study was to investigate the effectiveness of brain-based learning (BBL) and animated cartoons on video compact discs (VCDs) in enhancing the healthy habits of school children. A representative sample of 1085 school children in the first through the third grades at 16 schools was selected by multistage random sampling. Knowledge of healthy habits and self-reported adoption of practices were assessed by a questionnaire. BBL and VCD, either combined or as single-intervention techniques, led to improved knowledge and practice of healthy behavior, whereas conventional teaching did not. As a single-intervention technique, BBL on its own led to a greater improvement in healthy practices than VCD, but the addition of BBL to VCD made no difference, and there was no difference between BBL and VCD in terms of improvements in knowledge. In conclusion, both BBL and VCD are effective, but VCD requires fewer resources. Recommendations are made for further research. © 2012 APJPH.

A Survey in Indexing and Searching XML Documents.

ERIC Educational Resources Information Center

Luk, Robert W. P.; Leong, H. V.; Dillon, Tharam S.; Chan, Alvin T. S.; Croft, W. Bruce; Allan, James

2002-01-01

Discussion of XML focuses on indexing techniques for XML documents, grouping them into flat-file, semistructured, and structured indexing paradigms. Highlights include searching techniques, including full text search and multistage search; search result presentations; database and information retrieval system integration; XML query languages; and…

Lower-Order Compensation Chain Threshold-Reduction Technique for Multi-Stage Voltage Multipliers.

PubMed

Dell' Anna, Francesco; Dong, Tao; Li, Ping; Wen, Yumei; Azadmehr, Mehdi; Casu, Mario; Berg, Yngvar

2018-04-17

This paper presents a novel threshold-compensation technique for multi-stage voltage multipliers employed in low power applications such as passive and autonomous wireless sensing nodes (WSNs) powered by energy harvesters. The proposed threshold-reduction technique enables a topological design methodology which, through an optimum control of the trade-off among transistor conductivity and leakage losses, is aimed at maximizing the voltage conversion efficiency (VCE) for a given ac input signal and physical chip area occupation. The conducted simulations positively assert the validity of the proposed design methodology, emphasizing the exploitable design space yielded by the transistor connection scheme in the voltage multiplier chain. An experimental validation and comparison of threshold-compensation techniques was performed, adopting 2N5247 N-channel junction field effect transistors (JFETs) for the realization of the voltage multiplier prototypes. The attained measurements clearly support the effectiveness of the proposed threshold-reduction approach, which can significantly reduce the chip area occupation for a given target output performance and ac input signal.

Multistage classification of multispectral Earth observational data: The design approach

NASA Technical Reports Server (NTRS)

Bauer, M. E. (Principal Investigator); Muasher, M. J.; Landgrebe, D. A.

1981-01-01

An algorithm is proposed which predicts the optimal features at every node in a binary tree procedure. The algorithm estimates the probability of error by approximating the area under the likelihood ratio function for two classes and taking into account the number of training samples used in estimating each of these two classes. Some results on feature selection techniques, particularly in the presence of a very limited set of training samples, are presented. Results comparing probabilities of error predicted by the proposed algorithm as a function of dimensionality as compared to experimental observations are shown for aircraft and LANDSAT data. Results are obtained for both real and simulated data. Finally, two binary tree examples which use the algorithm are presented to illustrate the usefulness of the procedure.

Geographic applications of ERTS-1 imagery to rural landscape change in eastern Tennessee

NASA Technical Reports Server (NTRS)

Rehder, J. B. (Principal Investigator); Omalley, J. R.

1973-01-01

There are no author-identified significant results in this report. A multistage sampling experiment was conducted using low (10,000') and high (60,000') altitude aircraft imagery in comparison with orbital (560 miles) ERTS imagery. Although the aircraft data provide detailed landscape observations similar to ground truth data, they cover relatively small areas per image frame for irregular static slices of time. By comparison, ERTS provides repetitive observations in a regional perspective for broad areal coverage. Microdensitometric and computer techniques are being used to analyze the ERTS imagery for gray tone signatures, comparisons, and ultimately for landscape change detection.

Securing stent during multi-stage laryngotracheoplasty--an evolved technique.

PubMed

Siegel, Bianca; Bent, John P

2015-09-01

Multi-stage laryngotracheoplasty (LTP) typically requires a stent be secured to the airway for 2-6 weeks. Our technique has evolved over time to securing the stent to the strap muscles and tying a series of knots long enough to leave the suture tail protruding through the skin incision, which simplifies stent removal. Retrospective chart review. Twenty-four patients underwent multi-stage LTP at our institution from 2007 to 2013. Eight patients were excluded from the study because they either did not have a stent placed (n=4), or they had a t-tube placed which was not sutured in place (n=4). Of the remaining 16 patients, 62.5% (n=10) had their stent secured via sutures which were buried below the skin, and 37.5% (n=6) via a long suture tail which was left protruding through the end of the skin incision. An incision was required for stent removal 100% of buried sutures patients, and 33% of exposed suture patients (p=0.0009). Average operative time for stent removal was 60min in the buried sutures group, and 25min in the exposed sutures group (p=0.0075). Securing stents via an exposed suture technique decreases the need for making a skin incision during the second stage of the operation, and significantly decreases the operative time of the second stage. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Multistage Schemes with Multigrid for Euler and Navier-Strokes Equations: Components and Analysis

NASA Technical Reports Server (NTRS)

Swanson, R. C.; Turkel, Eli

1997-01-01

A class of explicit multistage time-stepping schemes with centered spatial differencing and multigrids are considered for the compressible Euler and Navier-Stokes equations. These schemes are the basis for a family of computer programs (flow codes with multigrid (FLOMG) series) currently used to solve a wide range of fluid dynamics problems, including internal and external flows. In this paper, the components of these multistage time-stepping schemes are defined, discussed, and in many cases analyzed to provide additional insight into their behavior. Special emphasis is given to numerical dissipation, stability of Runge-Kutta schemes, and the convergence acceleration techniques of multigrid and implicit residual smoothing. Both the Baldwin and Lomax algebraic equilibrium model and the Johnson and King one-half equation nonequilibrium model are used to establish turbulence closure. Implementation of these models is described.

Multi-stage learning aids applied to hands-on software training.

PubMed

Rother, Kristian; Rother, Magdalena; Pleus, Alexandra; Upmeier zu Belzen, Annette

2010-11-01

Delivering hands-on tutorials on bioinformatics software and web applications is a challenging didactic scenario. The main reason is that trainees have heterogeneous backgrounds, different previous knowledge and vary in learning speed. In this article, we demonstrate how multi-stage learning aids can be used to allow all trainees to progress at a similar speed. In this technique, the trainees can utilize cards with hints and answers to guide themselves self-dependently through a complex task. We have successfully conducted a tutorial for the molecular viewer PyMOL using two sets of learning aid cards. The trainees responded positively, were able to complete the task, and the trainer had spare time to respond to individual questions. This encourages us to conclude that multi-stage learning aids overcome many disadvantages of established forms of hands-on software training.

Influence of spatial beam inhomogeneities on the parameters of a petawatt laser system based on multi-stage parametric amplification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frolov, S A; Trunov, V I; Pestryakov, Efim V

2013-05-31

We have developed a technique for investigating the evolution of spatial inhomogeneities in high-power laser systems based on multi-stage parametric amplification. A linearised model of the inhomogeneity development is first devised for parametric amplification with the small-scale self-focusing taken into account. It is shown that the application of this model gives the results consistent (with high accuracy and in a wide range of inhomogeneity parameters) with the calculation without approximations. Using the linearised model, we have analysed the development of spatial inhomogeneities in a petawatt laser system based on multi-stage parametric amplification, developed at the Institute of Laser Physics, Siberianmore » Branch of the Russian Academy of Sciences (ILP SB RAS). (control of laser radiation parameters)« less

A multistage time-stepping scheme for the Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Swanson, R. C.; Turkel, E.

1985-01-01

A class of explicit multistage time-stepping schemes is used to construct an algorithm for solving the compressible Navier-Stokes equations. Flexibility in treating arbitrary geometries is obtained with a finite-volume formulation. Numerical efficiency is achieved by employing techniques for accelerating convergence to steady state. Computer processing is enhanced through vectorization of the algorithm. The scheme is evaluated by solving laminar and turbulent flows over a flat plate and an NACA 0012 airfoil. Numerical results are compared with theoretical solutions or other numerical solutions and/or experimental data.

Development of design technique for vacuum insulation in large size multi-aperture multi-grid accelerator for nuclear fusion.

PubMed

Kojima, A; Hanada, M; Tobari, H; Nishikiori, R; Hiratsuka, J; Kashiwagi, M; Umeda, N; Yoshida, M; Ichikawa, M; Watanabe, K; Yamano, Y; Grisham, L R

2016-02-01

Design techniques for the vacuum insulation have been developed in order to realize a reliable voltage holding capability of multi-aperture multi-grid (MAMuG) accelerators for fusion application. In this method, the nested multi-stage configuration of the MAMuG accelerator can be uniquely designed to satisfy the target voltage within given boundary conditions. The evaluation of the voltage holding capabilities of each acceleration stages was based on the previous experimental results about the area effect and the multi-aperture effect. Since the multi-grid effect was found to be the extension of the area effect by the total facing area this time, the total voltage holding capability of the multi-stage can be estimated from that per single stage by assuming the stage with the highest electric field, the total facing area, and the total apertures. By applying these consideration, the analysis on the 3-stage MAMuG accelerator for JT-60SA agreed well with the past gap-scan experiments with an accuracy of less than 10% variation, which demonstrated the high reliability to design MAMuG accelerators and also multi-stage high voltage bushings.

Development of design technique for vacuum insulation in large size multi-aperture multi-grid accelerator for nuclear fusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kojima, A., E-mail: kojima.atsushi@jaea.go.jp; Hanada, M.; Tobari, H.

Design techniques for the vacuum insulation have been developed in order to realize a reliable voltage holding capability of multi-aperture multi-grid (MAMuG) accelerators for fusion application. In this method, the nested multi-stage configuration of the MAMuG accelerator can be uniquely designed to satisfy the target voltage within given boundary conditions. The evaluation of the voltage holding capabilities of each acceleration stages was based on the previous experimental results about the area effect and the multi-aperture effect. Since the multi-grid effect was found to be the extension of the area effect by the total facing area this time, the total voltagemore » holding capability of the multi-stage can be estimated from that per single stage by assuming the stage with the highest electric field, the total facing area, and the total apertures. By applying these consideration, the analysis on the 3-stage MAMuG accelerator for JT-60SA agreed well with the past gap-scan experiments with an accuracy of less than 10% variation, which demonstrated the high reliability to design MAMuG accelerators and also multi-stage high voltage bushings.« less

Navigating complex sample analysis using national survey data.

PubMed

Saylor, Jennifer; Friedmann, Erika; Lee, Hyeon Joo

2012-01-01

The National Center for Health Statistics conducts the National Health and Nutrition Examination Survey and other national surveys with probability-based complex sample designs. Goals of national surveys are to provide valid data for the population of the United States. Analyses of data from population surveys present unique challenges in the research process but are valuable avenues to study the health of the United States population. The aim of this study was to demonstrate the importance of using complex data analysis techniques for data obtained with complex multistage sampling design and provide an example of analysis using the SPSS Complex Samples procedure. Illustration of challenges and solutions specific to secondary data analysis of national databases are described using the National Health and Nutrition Examination Survey as the exemplar. Oversampling of small or sensitive groups provides necessary estimates of variability within small groups. Use of weights without complex samples accurately estimates population means and frequency from the sample after accounting for over- or undersampling of specific groups. Weighting alone leads to inappropriate population estimates of variability, because they are computed as if the measures were from the entire population rather than a sample in the data set. The SPSS Complex Samples procedure allows inclusion of all sampling design elements, stratification, clusters, and weights. Use of national data sets allows use of extensive, expensive, and well-documented survey data for exploratory questions but limits analysis to those variables included in the data set. The large sample permits examination of multiple predictors and interactive relationships. Merging data files, availability of data in several waves of surveys, and complex sampling are techniques used to provide a representative sample but present unique challenges. In sophisticated data analysis techniques, use of these data is optimized.

Multistage stereotactic radiosurgery for large cerebral arteriovenous malformations using the Gamma Knife platform.

PubMed

Ding, Chuxiong; Hrycushko, Brian; Whitworth, Louis; Li, Xiang; Nedzi, Lucien; Weprin, Bradley; Abdulrahman, Ramzi; Welch, Babu; Jiang, Steve B; Wardak, Zabi; Timmerman, Robert D

2017-10-01

Radiosurgery is an established technique to treat cerebral arteriovenous malformations (AVMs). Obliteration of larger AVMs (> 10-15 cm 3 or diameter > 3 cm) in a single session is challenging with current radiosurgery platforms due to toxicity. We present a novel technique of multistage stereotactic radiosurgery (SRS) for large intracranial arteriovenous malformations (AVM) using the Gamma Knife system. Eighteen patients with large (> 10-15 cm 3 or diameter > 3 cm) AVMs, which were previously treated using a staged SRS technique on the Cyberknife platform, were retrospectively selected for this study. The AVMs were contoured and divided into 3-8 subtargets to be treated sequentially in a staged approach at half to 4 week intervals. The prescription dose ranged from 15 Gy to 20 Gy, depending on the subtarget number, volume, and location. Gamma Knife plans using multiple collimator settings were generated and optimized. The coordinates of each shot from the initial plan covering the total AVM target were extracted based on their relative positions within the frame system. The shots were regrouped based on their location with respect to the subtarget contours to generate subplans for each stage. The delivery time of each shot for a subtarget was decay corrected with 60 Co for staging the treatment course to generate the same dose distribution as that planned for the total AVM target. Conformality indices and dose-volume analysis were performed to evaluate treatment plans. With the shot redistribution technique, the composite dose for the multistaged treatment of multiple subtargets is equivalent to the initial plan for total AVM target. Gamma Knife plans resulted in an average PTV coverage of 96.3 ± 0.9% and a PITV of 1.23 ± 0.1. The resulting Conformality indices, V 12Gy and R 50 dose spillage values were 0.76 ± 0.05, 3.4 ± 1.8, and 3.1 ± 0.5 respectively. The Gamma Knife system can deliver a multistaged conformal dose to treat large AVMs when correcting for translational setup errors of each shot at each staged treatment. © 2017 American Association of Physicists in Medicine.

Efficient Multi-Stage Time Marching for Viscous Flows via Local Preconditioning

NASA Technical Reports Server (NTRS)

Kleb, William L.; Wood, William A.; vanLeer, Bram

1999-01-01

A new method has been developed to accelerate the convergence of explicit time-marching, laminar, Navier-Stokes codes through the combination of local preconditioning and multi-stage time marching optimization. Local preconditioning is a technique to modify the time-dependent equations so that all information moves or decays at nearly the same rate, thus relieving the stiffness for a system of equations. Multi-stage time marching can be optimized by modifying its coefficients to account for the presence of viscous terms, allowing larger time steps. We show it is possible to optimize the time marching scheme for a wide range of cell Reynolds numbers for the scalar advection-diffusion equation, and local preconditioning allows this optimization to be applied to the Navier-Stokes equations. Convergence acceleration of the new method is demonstrated through numerical experiments with circular advection and laminar boundary-layer flow over a flat plate.

THE NORTH CAROLINA HERALD PILOT STUDY

EPA Science Inventory

The sampling design for the National Children's Study (NCS) calls for a population-based, multi-stage, clustered household sampling approach. The full sample is designed to be representative of both urban and rural births in the United States, 2007-2011. While other sur...

RECRUITING FOR A LONGITUDINAL STUDY OF CHILDREN'S HEALTH USING A HOUSEHOLD-BASED PROBABILITY SAMPLING APPROACH

EPA Science Inventory

The sampling design for the National Children¿s Study (NCS) calls for a population-based, multi-stage, clustered household sampling approach (visit our website for more information on the NCS : www.nationalchildrensstudy.gov). The full sample is designed to be representative of ...

Randomized branch sampling

Treesearch

Harry T. Valentine

2002-01-01

Randomized branch sampling (RBS) is a special application of multistage probability sampling (see Sampling, environmental), which was developed originally by Jessen [3] to estimate fruit counts on individual orchard trees. In general, the method can be used to obtain estimates of many different attributes of trees or other branched plants. The usual objective of RBS is...

Developing optimum sample size and multistage sampling plans for Lobesia botrana (Lepidoptera: Tortricidae) larval infestation and injury in northern Greece.

PubMed

Ifoulis, A A; Savopoulou-Soultani, M

2006-10-01

The purpose of this research was to quantify the spatial pattern and develop a sampling program for larvae of Lobesia botrana Denis and Schiffermüller (Lepidoptera: Tortricidae), an important vineyard pest in northern Greece. Taylor's power law and Iwao's patchiness regression were used to model the relationship between the mean and the variance of larval counts. Analysis of covariance was carried out, separately for infestation and injury, with combined second and third generation data, for vine and half-vine sample units. Common regression coefficients were estimated to permit use of the sampling plan over a wide range of conditions. Optimum sample sizes for infestation and injury, at three levels of precision, were developed. An investigation of a multistage sampling plan with a nested analysis of variance showed that if the goal of sampling is focusing on larval infestation, three grape clusters should be sampled in a half-vine; if the goal of sampling is focusing on injury, then two grape clusters per half-vine are recommended.

Noise reduction techniques for Bayer-matrix images

NASA Astrophysics Data System (ADS)

Kalevo, Ossi; Rantanen, Henry

2002-04-01

In this paper, some arrangements to apply Noise Reduction (NR) techniques for images captured by a single sensor digital camera are studied. Usually, the NR filter processes full three-color component image data. This requires that raw Bayer-matrix image data, available from the image sensor, is first interpolated by using Color Filter Array Interpolation (CFAI) method. Another choice is that the raw Bayer-matrix image data is processed directly. The advantages and disadvantages of both processing orders, before (pre-) CFAI and after (post-) CFAI, are studied with linear, multi-stage median, multistage median hybrid and median-rational filters .The comparison is based on the quality of the output image, the processing power requirements and the amount of memory needed. Also the solution, which improves preservation of details in the NR filtering before the CFAI, is proposed.

Porous silicon advances in drug delivery and immunotherapy

PubMed Central

Savage, D; Liu, X; Curley, S; Ferrari, M; Serda, RE

2013-01-01

Biomedical applications of porous silicon include drug delivery, imaging, diagnostics and immunotherapy. This review summarizes new silicon particle fabrication techniques, dynamics of cellular transport, advances in the multistage vector approach to drug delivery, and the use of porous silicon as immune adjuvants. Recent findings support superior therapeutic efficacy of the multistage vector approach over single particle drug delivery systems in mouse models of ovarian and breast cancer. With respect to vaccine development, multivalent presentation of pathogen-associated molecular patterns on the particle surface creates powerful platforms for immunotherapy, with the porous matrix able to carry both antigens and immune modulators. PMID:23845260

High-performance liquid chromatography-diode array detection-electrospray ionization multi-stage mass spectrometric screening of an insect/plant system: the case of Spodoptera littoralis/Lycopersicon esculentum phenolics and alkaloids.

PubMed

Ferreres, Federico; Taveira, Marcos; Gil-Izquierdo, Angel; Oliveira, Luísa; Teixeira, Tânia; Valentão, Patrícia; Simões, Nelson; Andrade, Paula B

2011-07-30

High-performance liquid chromatography-diode array detection-electrospray ionization multi-stage mass spectrometry (HPLC-DAD-ESI-MS(n)) is considered to be a very valuable tool for the characterization of compounds found in trace amounts in natural matrices, as their previous isolation and clean-up steps can be avoided. Micro-scale separation increases the potential of this analytical technique, allowing the determination of compounds in reduced samples. Spodoptera littoralis represents a major challenge to Solanaceae plants, as it is one of the most deleterious pests. The S. littoralis/Lycopersicon esculentum system was studied for the first time concerning glycoalkaloids and phenolics. Using HPLC-DAD-ESI-MS(n) we were able to characterize 15 phenolic compounds in L. esculentum leaves. Nine of them are reported for the first time. Some differences were found between leaves of cerasiforme and 'Bull's heart' varieties. However, in the materials of S. littoralis (larvae, adults, exuviae and excrements) reared in both L. esculentum leaves no phenolics were identified. α-Tomatine was the main glycoalkaloid in the host plant. The glycoalkaloid composition of the different S. littoralis materials was distinct, with α-tomatine and dehydrotomatine being the main detected compounds in larvae and excrements. These results add knowledge to the ecological interaction in this insect/plant duo, for which it is hard to obtain considerable sample amounts. Copyright © 2011 John Wiley & Sons, Ltd.

Women's preference for traditional birth attendants and modern health care practitioners in Akpabuyo community of Cross River State, Nigeria.

PubMed

Akpabio, Idongesit I; Edet, Olaide B; Etifit, Rita E; Robinson-Bassey, Grace C

2014-01-01

The proportion of women who patronized traditional birth attendants (TBAs) or modern health care practitioners (MHCPs) was compared, including reasons for their choices. A comparative design was adopted to study 300 respondents selected through a multistage systematic random sampling technique. The instrument for data collection was a validated 21-item structured questionnaire. We observed that 75 (25%) patronized and 80 (27%) preferred TBAs, and 206 (69%) patronized and 220 (75%) preferred MHCPs, while 19 (6%) patronized both. The view that TBAs prayed before conducting deliveries was supported by a majority 75 (94%) of the respondents who preferred them. Factors associated with preference for TBAs should be addressed.

Eyeglasses Lens Contour Extraction from Facial Images Using an Efficient Shape Description

PubMed Central

Borza, Diana; Darabant, Adrian Sergiu; Danescu, Radu

2013-01-01

This paper presents a system that automatically extracts the position of the eyeglasses and the accurate shape and size of the frame lenses in facial images. The novelty brought by this paper consists in three key contributions. The first one is an original model for representing the shape of the eyeglasses lens, using Fourier descriptors. The second one is a method for generating the search space starting from a finite, relatively small number of representative lens shapes based on Fourier morphing. Finally, we propose an accurate lens contour extraction algorithm using a multi-stage Monte Carlo sampling technique. Multiple experiments demonstrate the effectiveness of our approach. PMID:24152926

Aerodynamic Analysis of Multistage Turbomachinery Flows in Support of Aerodynamic Design

NASA Technical Reports Server (NTRS)

Adamczyk, John J.

1999-01-01

This paper summarizes the state of 3D CFD based models of the time average flow field within axial flow multistage turbomachines. Emphasis is placed on models which are compatible with the industrial design environment and those models which offer the potential of providing credible results at both design and off-design operating conditions. The need to develop models which are free of aerodynamic input from semi-empirical design systems is stressed. The accuracy of such models is shown to be dependent upon their ability to account for the unsteady flow environment in multistage turbomachinery. The relevant flow physics associated with some of the unsteady flow processes present in axial flow multistage machinery are presented along with procedures which can be used to account for them in 3D CFD simulations. Sample results are presented for both axial flow compressors and axial flow turbines which help to illustrate the enhanced predictive capabilities afforded by including these procedures in 3D CFD simulations. Finally, suggestions are given for future work on the development of time average flow models.

Porous silicon advances in drug delivery and immunotherapy.

PubMed

Savage, David J; Liu, Xuewu; Curley, Steven A; Ferrari, Mauro; Serda, Rita E

2013-10-01

Biomedical applications of porous silicon include drug delivery, imaging, diagnostics and immunotherapy. This review summarizes new silicon particle fabrication techniques, dynamics of cellular transport, advances in the multistage vector approach to drug delivery, and the use of porous silicon as immune adjuvants. Recent findings support superior therapeutic efficacy of the multistage vector approach over single particle drug delivery systems in mouse models of ovarian and breast cancer. With respect to vaccine development, multivalent presentation of pathogen-associated molecular patterns on the particle surface creates powerful platforms for immunotherapy, with the porous matrix able to carry both antigens and immune modulators. Copyright © 2013 Elsevier Ltd. All rights reserved.

Multistage Spectral Relaxation Method for Solving the Hyperchaotic Complex Systems

PubMed Central

Saberi Nik, Hassan; Rebelo, Paulo

2014-01-01

We present a pseudospectral method application for solving the hyperchaotic complex systems. The proposed method, called the multistage spectral relaxation method (MSRM) is based on a technique of extending Gauss-Seidel type relaxation ideas to systems of nonlinear differential equations and using the Chebyshev pseudospectral methods to solve the resulting system on a sequence of multiple intervals. In this new application, the MSRM is used to solve famous hyperchaotic complex systems such as hyperchaotic complex Lorenz system and the complex permanent magnet synchronous motor. We compare this approach to the Runge-Kutta based ode45 solver to show that the MSRM gives accurate results. PMID:25386624

Environmental and human monitoring of Americium-241 utilizing extraction chromatography and alpha-spectrometry.

PubMed

Goldstein, S J; Hensley, C A; Armenta, C E; Peters, R J

1997-03-01

Recent developments in extraction chromatography have simplified the separation of americium from complex matrices in preparation for alpha-spectroscopy relative to traditional methods. Here we present results of procedures developed/adapted for water, air, and bioassay samples with less than 1 g of inorganic residue. Prior analytical methods required the use of a complex, multistage procedure for separation of americium from these matrices. The newer, simplified procedure requires only a single 2 mL extraction chromatographic separation for isolation of Am and lanthanides from other components of the sample. This method has been implemented on an extensive variety of "real" environmental and bioassay samples from the Los Alamos area, and consistently reliable and accurate results with appropriate detection limits have been obtained. The new method increases analytical throughput by a factor of approximately 2 and decreases environmental hazards from acid and mixed-waste generation relative to the prior technique. Analytical accuracy, reproducibility, and reliability are also significantly improved over the more complex and laborious method used previously.

Optimization Strategies for Single-Stage, Multi-Stage and Continuous ADRs

NASA Technical Reports Server (NTRS)

Shirron, Peter J.

2014-01-01

Adiabatic Demagnetization Refrigerators (ADR) have many advantages that are prompting a resurgence in their use in spaceflight and laboratory applications. They are solid-state coolers capable of very high efficiency and very wide operating range. However, their low energy storage density translates to larger mass for a given cooling capacity than is possible with other refrigeration techniques. The interplay between refrigerant mass and other parameters such as magnetic field and heat transfer points in multi-stage ADRs gives rise to a wide parameter space for optimization. This paper first presents optimization strategies for single ADR stages, focusing primarily on obtaining the largest cooling capacity per stage mass, then discusses the optimization of multi-stage and continuous ADRs in the context of the coordinated heat transfer that must occur between stages. The goal for the latter is usually to obtain the largest cooling power per mass or volume, but there can also be many secondary objectives, such as limiting instantaneous heat rejection rates and producing intermediate temperatures for cooling of other instrument components.

Performance of Random Effects Model Estimators under Complex Sampling Designs

ERIC Educational Resources Information Center

Jia, Yue; Stokes, Lynne; Harris, Ian; Wang, Yan

2011-01-01

In this article, we consider estimation of parameters of random effects models from samples collected via complex multistage designs. Incorporation of sampling weights is one way to reduce estimation bias due to unequal probabilities of selection. Several weighting methods have been proposed in the literature for estimating the parameters of…

Thermodynamics and Kinetics of Prenucleation Clusters, Classical and Non-Classical Nucleation

PubMed Central

Zahn, Dirk

2015-01-01

Recent observations of prenucleation species and multi-stage crystal nucleation processes challenge the long-established view on the thermodynamics of crystal formation. Here, we review and generalize extensions to classical nucleation theory. Going beyond the conventional implementation as has been used for more than a century now, nucleation inhibitors, precursor clusters and non-classical nucleation processes are rationalized as well by analogous concepts based on competing interface and bulk energy terms. This is illustrated by recent examples of species formed prior to/instead of crystal nucleation and multi-step nucleation processes. Much of the discussed insights were obtained from molecular simulation using advanced sampling techniques, briefly summarized herein for both nucleation-controlled and diffusion-controlled aggregate formation. PMID:25914369

General theory of the multistage geminate reactions of the isolated pairs of reactants. II. Detailed balance and universal asymptotes of kinetics.

PubMed

Kipriyanov, Alexey A; Doktorov, Alexander B

2014-10-14

The analysis of general (matrix) kinetic equations for the mean survival probabilities of any of the species in a sample (or mean concentrations) has been made for a wide class of the multistage geminate reactions of the isolated pairs. These kinetic equations (obtained in the frame of the kinetic approach based on the concept of "effective" particles in Paper I) take into account various possible elementary reactions (stages of a multistage reaction) excluding monomolecular, but including physical and chemical processes of the change in internal quantum states carried out with the isolated pairs of reactants (or isolated reactants). The general basic principles of total and detailed balance have been established. The behavior of the reacting system has been considered on macroscopic time scales, and the universal long-term kinetics has been determined.

General theory of multistage geminate reactions of isolated pairs of reactants. I. Kinetic equations.

PubMed

Doktorov, Alexander B; Kipriyanov, Alexey A

2014-05-14

General matrix approach to the consideration of multistage geminate reactions of isolated pairs of reactants depending on reactant mobility is formulated on the basis of the concept of "effective" particles. Various elementary reactions (stages of multistage reaction including physicochemical processes of internal quantum state changes) proceeding with the participation of isolated pairs of reactants (or isolated reactants) are taken into account. Investigation has been made in terms of kinetic approach implying the derivation of general (matrix) kinetic equations for local and mean probabilities of finding any of the reaction species in the sample under study (or for local and mean concentrations). The recipes for the calculation of kinetic coefficients of the equations for mean quantities in terms of relative coordinates of reactants have been formulated in the general case of inhomogeneous reacting systems. Important specific case of homogeneous reacting systems is considered.

Architecture of the parallel hierarchical network for fast image recognition

NASA Astrophysics Data System (ADS)

Timchenko, Leonid; Wójcik, Waldemar; Kokriatskaia, Natalia; Kutaev, Yuriy; Ivasyuk, Igor; Kotyra, Andrzej; Smailova, Saule

2016-09-01

Multistage integration of visual information in the brain allows humans to respond quickly to most significant stimuli while maintaining their ability to recognize small details in the image. Implementation of this principle in technical systems can lead to more efficient processing procedures. The multistage approach to image processing includes main types of cortical multistage convergence. The input images are mapped into a flexible hierarchy that reflects complexity of image data. Procedures of the temporal image decomposition and hierarchy formation are described in mathematical expressions. The multistage system highlights spatial regularities, which are passed through a number of transformational levels to generate a coded representation of the image that encapsulates a structure on different hierarchical levels in the image. At each processing stage a single output result is computed to allow a quick response of the system. The result is presented as an activity pattern, which can be compared with previously computed patterns on the basis of the closest match. With regard to the forecasting method, its idea lies in the following. In the results synchronization block, network-processed data arrive to the database where a sample of most correlated data is drawn using service parameters of the parallel-hierarchical network.

Managing Clustered Data Using Hierarchical Linear Modeling

ERIC Educational Resources Information Center

Warne, Russell T.; Li, Yan; McKyer, E. Lisako J.; Condie, Rachel; Diep, Cassandra S.; Murano, Peter S.

2012-01-01

Researchers in nutrition research often use cluster or multistage sampling to gather participants for their studies. These sampling methods often produce violations of the assumption of data independence that most traditional statistics share. Hierarchical linear modeling is a statistical method that can overcome violations of the independence…

A Review of the Suppression of Secondary Electron Emission from the Electrodes of Multistage Collectors

NASA Technical Reports Server (NTRS)

Dayton, James A., Jr.

1998-01-01

A review is presented of more than 20 years of research conducted at NASA Lewis Research Center on the suppression of secondary electron emission (SEE) for the enhancement of the efficiency of vacuum electron devices with multistage depressed collectors. This paper will include a description of measurement techniques, data from measurements of SEE on a variety of materials of engineering interest and methods of surface treatment for the suppression of SEE. In the course of this work the lowest secondary electron yield ever reported was achieved for ion textured graphite, and, in a parallel line of research, the highest yield was obtained for chemical vapor deposited thin diamond films.

Using lot quality-assurance sampling and area sampling to identify priority areas for trachoma control: Viet Nam.

PubMed

Myatt, Mark; Mai, Nguyen Phuong; Quynh, Nguyen Quang; Nga, Nguyen Huy; Tai, Ha Huy; Long, Nguyen Hung; Minh, Tran Hung; Limburg, Hans

2005-10-01

To report on the use of lot quality-assurance sampling (LQAS) surveys undertaken within an area-sampling framework to identify priority areas for intervention with trachoma control activities in Viet Nam. The LQAS survey method for the rapid assessment of the prevalence of active trachoma was adapted for use in Viet Nam with the aim of classifying individual communes by the prevalence of active trachoma among children in primary school. School-based sampling was used; school sites to be sampled were selected using an area-sampling approach. A total of 719 communes in 41 districts in 18 provinces were surveyed. Survey staff found the LQAS survey method both simple and rapid to use after initial problems with area-sampling methods were identified and remedied. The method yielded a finer spatial resolution of prevalence than had been previously achieved in Viet Nam using semiquantitative rapid assessment surveys and multistage cluster-sampled surveys. When used with area-sampling techniques, the LQAS survey method has the potential to form the basis of survey instruments that can be used to efficiently target resources for interventions against active trachoma. With additional work, such methods could provide a generally applicable tool for effective programme planning and for the certification of the elimination of trachoma as a blinding disease.

Multistage Electrophoretic Separators

NASA Technical Reports Server (NTRS)

Thomas, Nathan; Doyle, John F.; Kurk, Andy; Vellinger, John C.; Todd, Paul

2006-01-01

A multistage electrophoresis apparatus has been invented for use in the separation of cells, protein molecules, and other particles and solutes in concentrated aqueous solutions and suspensions. The design exploits free electrophoresis but overcomes the deficiencies of prior free-electrophoretic separators by incorporating a combination of published advances in mathematical modeling of convection, sedimentation, electro-osmotic flow, and the sedimentation and aggregation of droplets. In comparison with other electrophoretic separators, these apparatuses are easier to use and are better suited to separation in relatively large quantities characterized in the art as preparative (in contradistinction to smaller quantities characterized in the art as analytical). In a multistage electrophoretic separator according to the invention, an applied vertical steady electric field draws the electrically charged particles of interest from within a cuvette to within a collection cavity that has been moved into position of the cuvette. There are multiple collection cavities arranged in a circle; each is aligned with the cuvette for a prescribed short time. The multistage, short-migration-path character of the invention solves, possibly for the first time, the fluid-instability problems associated with free electrophoresis. The figure shows a prototype multistage electrophoretic separator that includes four sample stations and five collection stages per sample. At each sample station, an aqueous solution or suspension containing charged species to be separated is loaded into a cuvette, which is machined into a top plate. The apparatus includes a lower plate, into which 20 collection cavities have been milled. Each cavity is filled with an electrophoresis buffer solution. For the collection of an electrophoretic fraction, the lower plate is rotated to move a designated collection cavity into alignment with the opening of the cuvette. An electric field is then applied between a non-gassing electrode in the collection cavity and an electrolyte compartment, which is separated from the cuvette by a semipermeable membrane. The electrolyte is refreshed by circulation by use of a peristaltic pump. In subsequent steps, the lower plate is rotated to collect other electrophoretic fractions. Later, the collected fractions are removed from the collection cavities through ports that have threaded plugs. The base of the apparatus contains power supplies and a computer interface. The design includes provisions for monitoring and feedback control of cavity position, electric field, and temperature. The operation of the apparatus can easily be automated, as demonstrated by use of software that has already been written for this purpose.

Associations among Adolescent Risk Behaviours and Self-Esteem in Six Domains

ERIC Educational Resources Information Center

Wild, Lauren G.; Flisher, Alan J.; Bhana, Arvin; Lombard, Carl

2004-01-01

Background: This study investigated associations among adolescents' self-esteem in 6 domains (peers, school, family, sports/athletics, body image and global self-worth) and risk behaviours related to substance use, bullying, suicidality and sexuality. Method: A multistage stratified sampling strategy was used to select a representative sample of…

Advanced three-dimensional electron microscopy techniques in the quest for better structural and functional materials

PubMed Central

Schryvers, D; Cao, S; Tirry, W; Idrissi, H; Van Aert, S

2013-01-01

After a short review of electron tomography techniques for materials science, this overview will cover some recent results on different shape memory and nanostructured metallic systems obtained by various three-dimensional (3D) electron imaging techniques. In binary Ni–Ti, the 3D morphology and distribution of Ni4Ti3 precipitates are investigated by using FIB/SEM slice-and-view yielding 3D data stacks. Different quantification techniques will be presented including the principal ellipsoid for a given precipitate, shape classification following a Zingg scheme, particle distribution function, distance transform and water penetration. The latter is a novel approach to quantifying the expected matrix transformation in between the precipitates. The different samples investigated include a single crystal annealed with and without compression yielding layered and autocatalytic precipitation, respectively, and a polycrystal revealing different densities and sizes of the precipitates resulting in a multistage transformation process. Electron tomography was used to understand the interaction between focused ion beam-induced Frank loops and long dislocation structures in nanobeams of Al exhibiting special mechanical behaviour measured by on-chip deposition. Atomic resolution electron tomography is demonstrated on Ag nanoparticles in an Al matrix. PMID:27877554

Kinetics of the pyrolysis of arundo, sawdust, corn stover and switch grass biomass by thermogravimetric analysis using a multi-stage model.

PubMed

Biney, Paul O; Gyamerah, Michael; Shen, Jiacheng; Menezes, Bruna

2015-03-01

A new multi-stage kinetic model has been developed for TGA pyrolysis of arundo, corn stover, sawdust and switch grass that accounts for the initial biomass weight (W0). The biomass were decomposed in a nitrogen atmosphere from 23°C to 900°C in a TGA at a single 20°C/min ramp rate in contrast with the isoconversion technique. The decomposition was divided into multiple stages based on the absolute local minimum values of conversion derivative, (dx/dT), obtained from DTG curves. This resulted in three decomposition stages for arundo, corn stover and sawdust and four stages for switch grass. A linearized multi-stage model was applied to the TGA data for each stage to determine the pre-exponential factor, activation energy, and reaction order. The activation energies ranged from 54.7 to 60.9 kJ/mol, 62.9 to 108.7 kJ/mol, and 18.4 to 257.9 kJ/mol for the first, second and the third decomposition stages respectively. Copyright © 2014 Elsevier Ltd. All rights reserved.

Multistage point relascope and randomized branch sampling for downed coarse woody debris estimation

Treesearch

Jeffrey H. Gove; Mark J. Ducey; Harry T. Valentine

2002-01-01

New sampling methods have recently been introduced that allow estimation of downed coarse woody debris using an angle gauge, or relascope. The theory behind these methods is based on sampling straight pieces of downed coarse woody debris. When pieces deviate from this ideal situation, auxillary methods must be employed. We describe a two-stage procedure where the...

Alternatives to Three-Mode Factor Analysis: A Case Study with Data Evaluating Perceived Barriers to Medical School Training.

ERIC Educational Resources Information Center

Thomson, William A.; And Others

While educational researchers frequently collect data from a sample of individuals on a sample of variables, they sometimes collect data involving samples of: (1) subjects; (2) variables; and (3) occasions of measurement. A multistage procedure for analyzing such three-mode data is presented, focusing on effect sizes and graphic confidence…

Midwives Performance in Early Detection of Growth and Development Irregularities of Children Based on Task Commitment

ERIC Educational Resources Information Center

Utami, Sri; Nursalam; Hargono, Rachmat; Susilaningrum, Rekawati

2016-01-01

The purpose of this study was to analyze the performance of midwives based on the task commitment. This was an observational analytic with cross sectional approach. Multistage random sampling was used to determine the public health center, proportional random sampling to selected participants. The samples were 222 midwives in the public health…

Identification of triacylglycerol using automated annotation of high resolution multistage mass spectral trees.

PubMed

Wang, Xiupin; Peng, Qingzhi; Li, Peiwu; Zhang, Qi; Ding, Xiaoxia; Zhang, Wen; Zhang, Liangxiao

2016-10-12

High complexity of identification for non-target triacylglycerols (TAGs) is a major challenge in lipidomics analysis. To identify non-target TAGs, a powerful tool named accurate MS(n) spectrometry generating so-called ion trees is used. In this paper, we presented a technique for efficient structural elucidation of TAGs on MS(n) spectral trees produced by LTQ Orbitrap MS(n), which was implemented as an open source software package, or TIT. The TIT software was used to support automatic annotation of non-target TAGs on MS(n) ion trees from a self-built fragment ion database. This database includes 19108 simulate TAG molecules from a random combination of fatty acids and corresponding 500582 self-built multistage fragment ions (MS ≤ 3). Our software can identify TAGs using a "stage-by-stage elimination" strategy. By utilizing the MS(1) accurate mass and referenced RKMD, the TIT software can discriminate unique elemental composition candidates. The regiospecific isomers of fatty acyl chains will be distinguished using MS(2) and MS(3) fragment spectra. We applied the algorithm to the selection of 45 TAG standards and demonstrated that the molecular ions could be 100% correctly assigned. Therefore, the TIT software could be applied to TAG identification in complex biological samples such as mouse plasma extracts. Copyright © 2016 Elsevier B.V. All rights reserved.

Development of Effective Teacher Program: Teamwork Building Program for Thailand's Municipal Schools

ERIC Educational Resources Information Center

Chantathai, Pimpka; Tesaputa, Kowat; Somprach, Kanokorn

2015-01-01

This research is aimed to formulate the effective teacher teamwork program in municipal schools in Thailand. Primary survey on current situation and problem was conducted to develop the plan to suggest potential programs. Samples were randomly selected from municipal schools by using multi-stage sampling method in order to investigate their…

Environmental and human monitoring of Americium-241 utilizing extraction chromatography and {alpha}-Spectrometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldstein, S.J.; Hensley, C.A.; Armenta, C.E.

1997-03-01

Recent developments in extraction chromatography have simplified the separation of americium from complex matrices in preparation for {alpha}-spectroscopy relative to traditional methods. Here we present results of procedures developed/adapted for water, air, and bioassay samples with less than 1 g of inorganic residue. Prior analytical methods required the use of a complex, multistage procedure for separation of americium from these matrices. The newer, simplified procedure requires only a single 2 mL extraction chromatographic separation for isolation of Am and lanthanides from other components of the sample. This method has been implemented on an extensive variety of `real` environmental and bioassaymore » samples from the Los Alamos area, and consistently reliable and accurate results with appropriate detection limits have been obtained. The new method increases analytical throughput by a factor of {approx}2 and decreases environmental hazards from acid and mixed-waste generation relative to the prior technique. Analytical accuracy, reproducibility, and reliability are also significantly improved over the more complex and laborious method used previously. 24 refs., 2 figs., 2 tabs.« less

Micropillar Compression Technique Applied to Micron-Scale Mudstone Elasto-Plastic Deformation

NASA Astrophysics Data System (ADS)

Dewers, T. A.; Boyce, B.; Buchheit, T.; Heath, J. E.; Chidsey, T.; Michael, J.

2010-12-01

Mudstone mechanical testing is often limited by poor core recovery and sample size, preservation and preparation issues, which can lead to sampling bias, damage, and time-dependent effects. A micropillar compression technique, originally developed by Uchic et al. 2004, here is applied to elasto-plastic deformation of small volumes of mudstone, in the range of cubic microns. This study examines behavior of the Gothic shale, the basal unit of the Ismay zone of the Pennsylvanian Paradox Formation and potential shale gas play in southeastern Utah, USA. Precision manufacture of micropillars 5 microns in diameter and 10 microns in length are prepared using an ion-milling method. Characterization of samples is carried out using: dual focused ion - scanning electron beam imaging of nano-scaled pores and distribution of matrix clay and quartz, as well as pore-filling organics; laser scanning confocal (LSCM) 3D imaging of natural fractures; and gas permeability, among other techniques. Compression testing of micropillars under load control is performed using two different nanoindenter techniques. Deformation of 0.5 cm in diameter by 1 cm in length cores is carried out and visualized by a microscope loading stage and laser scanning confocal microscopy. Axisymmetric multistage compression testing and multi-stress path testing is carried out using 2.54 cm plugs. Discussion of results addresses size of representative elementary volumes applicable to continuum-scale mudstone deformation, anisotropy, and size-scale plasticity effects. Other issues include fabrication-induced damage, alignment, and influence of substrate. This work is funded by the US Department of Energy, Office of Basic Energy Sciences. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy’s National Nuclear Security Administration under contract DE-AC04-94AL85000.

Novel strategy for the determination of illegal adulterants in health foods and herbal medicines using high-performance liquid chromatography with high-resolution mass spectrometry.

PubMed

Wang, Zhe; Wu, Caisheng; Wang, Gangli; Zhang, Qingsheng; Zhang, Jinlan

2015-03-01

The detection, confirmation, and quantification of multiple illegal adulterants in health foods and herbal medicines by using a single analytical method are a challenge. This paper reports on a new strategy to meet this challenge by employing high-performance liquid chromatography coupled with high-resolution mass spectrometry and a mass spectral tree similarity filter technique. This analytical method can rapidly collect high-resolution, high-accuracy, optionally multistage mass data for compounds in samples. After a preliminary screening by retention time and high-resolution mass spectral data, known illegal adulterants can be detected. The mass spectral tree similarity filter technique has been applied to rapidly confirm these adulterants and simultaneously discover unknown ones. By using full-scan mass spectra as stem and data-dependent subsequent stage mass spectra to form branches, mass spectrometry data from detected compounds are converted into mass spectral trees. The known or unknown illegal adulterants in the samples are confirmed or discovered based on the similarity between their mass spectral trees and those of the references in a library, and they are finally quantified against standard curves. This new strategy has been tested by using 50 samples, and the illegal adulterants were rapidly and effectively detected, confirmed and quantified. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Determination of the Alternaria mycotoxin tenuazonic acid in cereals by high-performance liquid chromatography-electrospray ionization ion-trap multistage mass spectrometry after derivatization with 2,4-dinitrophenylhydrazine.

PubMed

Siegel, David; Rasenko, Tatjana; Koch, Matthias; Nehls, Irene

2009-05-22

Tenuazonic acid (TA) is a major Alternaria mycotoxin. In the present work a novel approach for the detection of TA in cereals by liquid chromatography-ion-trap multistage mass spectrometry after derivatization with 2,4-dinitrophenylhydrazine is described. The product of the derivatization reaction and its major MS(2) fragments were characterised by Fourier transform-ion cyclotron resonance tandem mass spectrometry. Without preconcentration, the established method features a limit of detection of 10 microg/kg using 2g of sample in a rapid workup procedure. Accuracy, precision and linearity were evaluated in the working range of 50-5000 microg/kg. TA was detected in 13 and quantified in 3 out of 27 cereal samples obtained from a local supermarket, the average content being 49 microg/kg (highest incidence: 851+/-41 microg/kg).

Cosmic ray exposure histories of Apollo 14, Apollo 15, and Apollo 16 rocks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eugster, O.; Eberhardt, P.

1984-02-15

The regolith exposure history of six rocks returned by the Apollo 14, 15, and 16 missions is studied based on the cosmogenic noble gas isotopes. For each sample, the complete set of all stable noble gas isotopes and the radiaoctive isotope Kr-81 were measured. Kr-81-Kr exposure ages are calculated for rocks for which a single-stage exposure can be demonstrated. A two-stage model exposure history is derived for multistage-exposure basalt 14310 based on the amounts and isotopic ratios of the cosmogenic noble gases. The apparent Kr-81-Kr age, the depth-sensitive isostopic ratios, and fission Xe-136 results lead to the conclusion that thismore » sample was preexposed 1.75 AE ago to cosmic rays for a duration of 350 m.y. Basalt 15058 and anorthosite 15415 also reveal multistage exposures. 44 references.« less

Using lot quality-assurance sampling and area sampling to identify priority areas for trachoma control: Viet Nam.

PubMed Central

Myatt, Mark; Mai, Nguyen Phuong; Quynh, Nguyen Quang; Nga, Nguyen Huy; Tai, Ha Huy; Long, Nguyen Hung; Minh, Tran Hung; Limburg, Hans

2005-01-01

OBJECTIVE: To report on the use of lot quality-assurance sampling (LQAS) surveys undertaken within an area-sampling framework to identify priority areas for intervention with trachoma control activities in Viet Nam. METHODS: The LQAS survey method for the rapid assessment of the prevalence of active trachoma was adapted for use in Viet Nam with the aim of classifying individual communes by the prevalence of active trachoma among children in primary school. School-based sampling was used; school sites to be sampled were selected using an area-sampling approach. A total of 719 communes in 41 districts in 18 provinces were surveyed. FINDINGS: Survey staff found the LQAS survey method both simple and rapid to use after initial problems with area-sampling methods were identified and remedied. The method yielded a finer spatial resolution of prevalence than had been previously achieved in Viet Nam using semiquantitative rapid assessment surveys and multistage cluster-sampled surveys. CONCLUSION: When used with area-sampling techniques, the LQAS survey method has the potential to form the basis of survey instruments that can be used to efficiently target resources for interventions against active trachoma. With additional work, such methods could provide a generally applicable tool for effective programme planning and for the certification of the elimination of trachoma as a blinding disease. PMID:16283052

Affective Structures among Students and Its Relationship with Academic Burnout with Emphasis on Gender

ERIC Educational Resources Information Center

Bikar, Somaye; Marziyeh, Afsaneh; Pourghaz, Abdolwahab

2018-01-01

This study aimed to determine the relationship between affective structures and academic burnout among male and female third-grade high school students in Zahedan in the academic year 2016-2017. The current descriptive-correlational study had a sample including 362 students selected using a multistage cluster sampling method. To collect data,…

Predicting Personality Resiliency by Psychological Well-Being and Its Components in Girl Students of Islamic Azad University

ERIC Educational Resources Information Center

Kajbafnezhad, Hadi; Khaneh Keshi, Ali

2015-01-01

The aim of this study was to predict psychological resilience by psychological well-being and its components. The research sample consisted of 216 girl students who were selected through multistage random sampling. The data were collected by implementing psychological resilience and psychological well-being questionnaire and analyzed by using…

The Relationship between Utilization of Computer Games and Spatial Abilities among High School Students

ERIC Educational Resources Information Center

Motamedi, Vahid; Yaghoubi, Razeyah Mohagheghyan

2015-01-01

This study aimed at investigating the relationship between computer game use and spatial abilities among high school students. The sample consisted of 300 high school male students selected through multi-stage cluster sampling. Data gathering tools consisted of a researcher made questionnaire (to collect information on computer game usage) and the…

Validity, Reliability and Difficulty Indices for Instructor-Built Exam Questions

ERIC Educational Resources Information Center

Jandaghi, Gholamreza; Shaterian, Fatemeh

2008-01-01

The purpose of the research is to determine college Instructor's skill rate in designing exam questions in chemistry subject. The statistical population was all of chemistry exam sheets for two semesters in one academic year from which a sample of 364 exam sheets was drawn using multistage cluster sampling. Two experts assessed the sheets and by…

The Evaluation of Bias of the Weighted Random Effects Model Estimators. Research Report. ETS RR-11-13

ERIC Educational Resources Information Center

Jia, Yue; Stokes, Lynne; Harris, Ian; Wang, Yan

2011-01-01

Estimation of parameters of random effects models from samples collected via complex multistage designs is considered. One way to reduce estimation bias due to unequal probabilities of selection is to incorporate sampling weights. Many researchers have been proposed various weighting methods (Korn, & Graubard, 2003; Pfeffermann, Skinner,…

3D printed e-tongue

NASA Astrophysics Data System (ADS)

Gaál, Gabriel; da Silva, Tatiana A.; Gaál, Vladimir; Hensel, Rafael C.; Amaral, Lucas R.; Rodrigues, Varlei; Riul, Antonio

2018-05-01

Nowadays, one of the biggest issues addressed to electronic sensor fabrication is the build-up of efficient electrodes as an alternative way to the expensive, complex and multistage processes required by traditional techniques. Printed electronics arises as an interesting alternative to fulfill this task due to the simplicity and speed to stamp electrodes on various surfaces. Within this context, the Fused Deposition Modeling 3D printing is an emerging, cost-effective and alternative technology to fabricate complex structures that potentiates several fields with more creative ideas and new materials for a rapid prototyping of devices. We show here the fabrication of interdigitated electrodes using a standard home-made CoreXY 3D printer using transparent and graphene-based PLA filaments. Macro 3D printed electrodes were easily assembled within 6 minutes with outstanding reproducibility. The electrodes were also functionalized with different nanostructured thin films via dip-coating Layer-by-Layer technique to develop a 3D printed e-tongue setup. As a proof of concept, the printed e-tongue was applied to soil analysis. A control soil sample was enriched with several macro-nutrients to the plants (N, P, K, S, Mg and Ca) and the discrimination was done by electrical impedance spectroscopy of water solution of the soil samples. The data was analyzed by Principal Component Analysis and the 3D printed sensor distinguished clearly all enriched samples despite the complexity of the soil chemical composition. The 3D printed e-tongue successfully used in soil analysis encourages further investments in developing new sensory tools for precision agriculture and other fields exploiting the simplicity and flexibility offered by the 3D printing techniques.

Prevalence of Obesity Among Adults and Youth: United States, 2011-2014

MedlinePlus

... sample is selected through a complex, multistage probability design. In 2011–2012 and 2013–2014, non-Hispanic ... All variance estimates accounted for the complex survey design by using Taylor series linearization. Pregnant females were ...

Inspection logistics planning for multi-stage production systems with applications to semiconductor fabrication lines

NASA Astrophysics Data System (ADS)

Chen, Kyle Dakai

Since the market for semiconductor products has become more lucrative and competitive, research into improving yields for semiconductor fabrication lines has lately received a tremendous amount of attention. One of the most critical tasks in achieving such yield improvements is to plan the in-line inspection sampling efficiently so that any potential yield problems can be detected early and eliminated quickly. We formulate a multi-stage inspection planning model based on configurations in actual semiconductor fabrication lines, specifically taking into account both the capacity constraint and the congestion effects at the inspection station. We propose a new mixed First-Come-First-Serve (FCFS) and Last-Come-First-Serve (LCFS) discipline for serving the inspection samples to expedite the detection of potential yield problems. Employing this mixed FCFS and LCFS discipline, we derive approximate expressions for the queueing delays in yield problem detection time and develop near-optimal algorithms to obtain the inspection logistics planning policies. We also investigate the queueing performance with this mixed type of service discipline under different assumptions and configurations. In addition, we conduct numerical tests and generate managerial insights based on input data from actual semiconductor fabrication lines. To the best of our knowledge, this research is novel in developing, for the first time in the literature, near-optimal results for inspection logistics planning in multi-stage production systems with congestion effects explicitly considered.

Process cost and facility considerations in the selection of primary cell culture clarification technology.

PubMed

Felo, Michael; Christensen, Brandon; Higgins, John

2013-01-01

The bioreactor volume delineating the selection of primary clarification technology is not always easily defined. Development of a commercial scale process for the manufacture of therapeutic proteins requires scale-up from a few liters to thousands of liters. While the separation techniques used for protein purification are largely conserved across scales, the separation techniques for primary cell culture clarification vary with scale. Process models were developed to compare monoclonal antibody production costs using two cell culture clarification technologies. One process model was created for cell culture clarification by disc stack centrifugation with depth filtration. A second process model was created for clarification by multi-stage depth filtration. Analyses were performed to examine the influence of bioreactor volume, product titer, depth filter capacity, and facility utilization on overall operating costs. At bioreactor volumes <1,000 L, clarification using multi-stage depth filtration offers cost savings compared to clarification using centrifugation. For bioreactor volumes >5,000 L, clarification using centrifugation followed by depth filtration offers significant cost savings. For bioreactor volumes of ∼ 2,000 L, clarification costs are similar between depth filtration and centrifugation. At this scale, factors including facility utilization, available capital, ease of process development, implementation timelines, and process performance characterization play an important role in clarification technology selection. In the case study presented, a multi-product facility selected multi-stage depth filtration for cell culture clarification at the 500 and 2,000 L scales of operation. Facility implementation timelines, process development activities, equipment commissioning and validation, scale-up effects, and process robustness are examined. © 2013 American Institute of Chemical Engineers.

Least reliable bits coding (LRBC) for high data rate satellite communications

NASA Technical Reports Server (NTRS)

Vanderaar, Mark; Budinger, James; Wagner, Paul

1992-01-01

LRBC, a bandwidth efficient multilevel/multistage block-coded modulation technique, is analyzed. LRBC uses simple multilevel component codes that provide increased error protection on increasingly unreliable modulated bits in order to maintain an overall high code rate that increases spectral efficiency. Soft-decision multistage decoding is used to make decisions on unprotected bits through corrections made on more protected bits. Analytical expressions and tight performance bounds are used to show that LRBC can achieve increased spectral efficiency and maintain equivalent or better power efficiency compared to that of BPSK. The relative simplicity of Galois field algebra vs the Viterbi algorithm and the availability of high-speed commercial VLSI for block codes indicates that LRBC using block codes is a desirable method for high data rate implementations.

Multistage bioassociation of uranium onto an extremely halophilic archaeon revealed by a unique combination of spectroscopic and microscopic techniques

DOE PAGES

Bader, Miriam; Müller, Katharina; Foerstendorf, Harald; ...

2016-12-27

The interactions of two extremely halophilic archaea with uranium were investigated in this paper at high ionic strength as a function of time, pH and uranium concentration. Halobacterium noricense DSM-15987 and Halobacterium sp. putatively noricense, isolated from the Waste Isolation Pilot Plant repository, were used for these investigations. The kinetics of U(VI) bioassociation with both strains showed an atypical multistage behavior, meaning that after an initial phase of U(VI) sorption, an unexpected interim period of U(VI) release was observed, followed by a slow reassociation of uranium with the cells. By applying in situ attenuated total reflection Fourier-transform infrared spectroscopy, themore » involvement of phosphoryl and carboxylate groups in U(VI) complexation during the first biosorption phase was shown. Differences in cell morphology and uranium localization become visible at different stages of the bioassociation process, as shown with scanning electron microscopy in combination with energy dispersive X-ray spectroscopy. Finally, our results demonstrate for the first time that association of uranium with the extremely halophilic archaeon is a multistage process, beginning with sorption and followed by another process, probably biomineralization.« less

Multistage bioassociation of uranium onto an extremely halophilic archaeon revealed by a unique combination of spectroscopic and microscopic techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bader, Miriam; Müller, Katharina; Foerstendorf, Harald

The interactions of two extremely halophilic archaea with uranium were investigated in this paper at high ionic strength as a function of time, pH and uranium concentration. Halobacterium noricense DSM-15987 and Halobacterium sp. putatively noricense, isolated from the Waste Isolation Pilot Plant repository, were used for these investigations. The kinetics of U(VI) bioassociation with both strains showed an atypical multistage behavior, meaning that after an initial phase of U(VI) sorption, an unexpected interim period of U(VI) release was observed, followed by a slow reassociation of uranium with the cells. By applying in situ attenuated total reflection Fourier-transform infrared spectroscopy, themore » involvement of phosphoryl and carboxylate groups in U(VI) complexation during the first biosorption phase was shown. Differences in cell morphology and uranium localization become visible at different stages of the bioassociation process, as shown with scanning electron microscopy in combination with energy dispersive X-ray spectroscopy. Finally, our results demonstrate for the first time that association of uranium with the extremely halophilic archaeon is a multistage process, beginning with sorption and followed by another process, probably biomineralization.« less

Multistage bioassociation of uranium onto an extremely halophilic archaeon revealed by a unique combination of spectroscopic and microscopic techniques.

PubMed

Bader, Miriam; Müller, Katharina; Foerstendorf, Harald; Drobot, Björn; Schmidt, Matthias; Musat, Niculina; Swanson, Juliet S; Reed, Donald T; Stumpf, Thorsten; Cherkouk, Andrea

2017-04-05

The interactions of two extremely halophilic archaea with uranium were investigated at high ionic strength as a function of time, pH and uranium concentration. Halobacterium noricense DSM-15987 and Halobacterium sp. putatively noricense, isolated from the Waste Isolation Pilot Plant repository, were used for these investigations. The kinetics of U(VI) bioassociation with both strains showed an atypical multistage behavior, meaning that after an initial phase of U(VI) sorption, an unexpected interim period of U(VI) release was observed, followed by a slow reassociation of uranium with the cells. By applying in situ attenuated total reflection Fourier-transform infrared spectroscopy, the involvement of phosphoryl and carboxylate groups in U(VI) complexation during the first biosorption phase was shown. Differences in cell morphology and uranium localization become visible at different stages of the bioassociation process, as shown with scanning electron microscopy in combination with energy dispersive X-ray spectroscopy. Our results demonstrate for the first time that association of uranium with the extremely halophilic archaeon is a multistage process, beginning with sorption and followed by another process, probably biomineralization. Copyright © 2016. Published by Elsevier B.V.

Enhancing the Skill-Building Phase of Introductory Organic Chemistry Lab through a Reflective Peer Review Structure

ERIC Educational Resources Information Center

Pontrello, Jason K.

2016-01-01

Introductory organic laboratory courses frequently begin with a set of activities built around developing basic experimental skills and techniques, often with guided-inquiry components. A sequence of skill-based activities is described to promote reflection, analysis of, and interpersonal communication around science. A multistage process was used…

Transformer-Feedback Interstage Bandwidth Enhancement for MMIC Multistage Amplifiers

NASA Astrophysics Data System (ADS)

Nikandish, Gholamreza; Medi, Ali

2015-02-01

The transformer-feedback (TRFB) interstage bandwidth enhancement technique for broadband multistage amplifiers is presented. Theory of the TRFB bandwidth enhancement and the design conditions for maximum bandwidth, maximally flat gain, and maximally flat group delay are provided. It is shown that the TRFB bandwidth enhancement can provide higher bandwidth compared to the conventional techniques based on reactive impedance matching networks. A three-stage low-noise amplifier (LNA) monolithic microwave integrated circuit with the TRFB between its consecutive stages is designed and implemented in a 0.1- μm GaAs pHEMT process. The TRFB is realized by coupling between the drain bias lines of transistors. The reuse of bias lines leads to bandwidth enhancement without increasing the chip area and power consumption. The LNA features average gain of 23 dB and 3-dB bandwidth of 11-39 GHz. It provides a noise figure of 2.1-3.0 dB and an output 1-dB compression point of 8.6 dBm, while consuming 40 mA of current from a 2-V supply.

SU-E-T-480: Radiobiological Dose Comparison of Single Fraction SRS, Multi-Fraction SRT and Multi-Stage SRS of Large Target Volumes Using the Linear-Quadratic Formula

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ding, C; Hrycushko, B; Jiang, S

2014-06-01

Purpose: To compare the radiobiological effect on large tumors and surrounding normal tissues from single fraction SRS, multi-fractionated SRT, and multi-staged SRS treatment. Methods: An anthropomorphic head phantom with a centrally located large volume target (18.2 cm{sup 3}) was scanned using a 16 slice large bore CT simulator. Scans were imported to the Multiplan treatment planning system where a total prescription dose of 20Gy was used for a single, three staged and three fractionated treatment. Cyber Knife treatment plans were inversely optimized for the target volume to achieve at least 95% coverage of the prescription dose. For the multistage plan,more » the target was segmented into three subtargets having similar volume and shape. Staged plans for individual subtargets were generated based on a planning technique where the beam MUs of the original plan on the total target volume are changed by weighting the MUs based on projected beam lengths within each subtarget. Dose matrices for each plan were export in DICOM format and used to calculate equivalent dose distributions in 2Gy fractions using an alpha beta ratio of 10 for the target and 3 for normal tissue. Results: Singe fraction SRS, multi-stage plan and multi-fractionated SRT plans had an average 2Gy dose equivalent to the target of 62.89Gy, 37.91Gy and 33.68Gy, respectively. The normal tissue within 12Gy physical dose region had an average 2Gy dose equivalent of 29.55Gy, 16.08Gy and 13.93Gy, respectively. Conclusion: The single fraction SRS plan had the largest predicted biological effect for the target and the surrounding normal tissue. The multi-stage treatment provided for a more potent biologically effect on target compared to the multi-fraction SRT treatments with less biological normal tissue than single-fraction SRS treatment.« less

Quantitative Research on the Outcomes of China's Inland Tibetan Classes and Schools Policy: A Survey of Graduates

ERIC Educational Resources Information Center

Xiaorong, Wu

2015-01-01

Under the Inland Tibetan Classes and Schools Policy, China has trained a large number of personnel to facilitate the social, economic, and cultural development of Tibet. This study used a multistage, random sample survey to collect data on the comprehensive qualities of two sample groups of personnel in Tibet: graduates and nongraduates of inland…

The Role of Socio-Cognitive Variables in Predicting Learning Satisfaction in Smart Schools

ERIC Educational Resources Information Center

Firoozi, Mohammad Reza; Kazemi, Ali; Jokar, Maryam

2017-01-01

The present study aimed to investigate the role of Socio-Cognitive variables in predicting learning satisfaction in Smart Schools. The population was all the primary school students studying in smart schools in the city of Shiraz in the school year 2014-2015. The sample, randomly chosen through multi-stage cluster sampling, was 383 primary school…

Teachers' Methodologies and Sources of Information on HIV/AIDS for Students with Visual Impairments in Selected Residential and Integrated Schools in Ghana

ERIC Educational Resources Information Center

Hayford, Samuel K.; Ocansey, Frederick

2017-01-01

This study reports part of a national survey on sources of information, education and communication materials on HIV/AIDS available to students with visual impairments in residential, segregated, and integrated schools in Ghana. A multi-staged stratified random sampling procedure and a purposive and simple random sampling approach, where…

Multistage estimation of received carrier signal parameters under very high dynamic conditions of the receiver

NASA Technical Reports Server (NTRS)

Kumar, Rajendra (Inventor)

1991-01-01

A multistage estimator is provided for the parameters of a received carrier signal possibly phase-modulated by unknown data and experiencing very high Doppler, Doppler rate, etc., as may arise, for example, in the case of Global Positioning Systems (GPS) where the signal parameters are directly related to the position, velocity and jerk of the GPS ground-based receiver. In a two-stage embodiment of the more general multistage scheme, the first stage, selected to be a modified least squares algorithm referred to as differential least squares (DLS), operates as a coarse estimator resulting in higher rms estimation errors but with a relatively small probability of the frequency estimation error exceeding one-half of the sampling frequency, provides relatively coarse estimates of the frequency and its derivatives. The second stage of the estimator, an extended Kalman filter (EKF), operates on the error signal available from the first stage refining the overall estimates of the phase along with a more refined estimate of frequency as well and in the process also reduces the number of cycle slips.

Estimation and Selection via Absolute Penalized Convex Minimization And Its Multistage Adaptive Applications

PubMed Central

Huang, Jian; Zhang, Cun-Hui

2013-01-01

The ℓ1-penalized method, or the Lasso, has emerged as an important tool for the analysis of large data sets. Many important results have been obtained for the Lasso in linear regression which have led to a deeper understanding of high-dimensional statistical problems. In this article, we consider a class of weighted ℓ1-penalized estimators for convex loss functions of a general form, including the generalized linear models. We study the estimation, prediction, selection and sparsity properties of the weighted ℓ1-penalized estimator in sparse, high-dimensional settings where the number of predictors p can be much larger than the sample size n. Adaptive Lasso is considered as a special case. A multistage method is developed to approximate concave regularized estimation by applying an adaptive Lasso recursively. We provide prediction and estimation oracle inequalities for single- and multi-stage estimators, a general selection consistency theorem, and an upper bound for the dimension of the Lasso estimator. Important models including the linear regression, logistic regression and log-linear models are used throughout to illustrate the applications of the general results. PMID:24348100

Multistage estimation of received carrier signal parameters under very high dynamic conditions of the receiver

NASA Technical Reports Server (NTRS)

Kumar, Rajendra (Inventor)

1990-01-01

A multistage estimator is provided for the parameters of a received carrier signal possibly phase-modulated by unknown data and experiencing very high Doppler, Doppler rate, etc., as may arise, for example, in the case of Global Positioning Systems (GPS) where the signal parameters are directly related to the position, velocity and jerk of the GPS ground-based receiver. In a two-stage embodiment of the more general multistage scheme, the first stage, selected to be a modified least squares algorithm referred to as differential least squares (DLS), operates as a coarse estimator resulting in higher rms estimation errors but with a relatively small probability of the frequency estimation error exceeding one-half of the sampling frequency, provides relatively coarse estimates of the frequency and its derivatives. The second stage of the estimator, an extended Kalman filter (EKF), operates on the error signal available from the first stage refining the overall estimates of the phase along with a more refined estimate of frequency as well and in the process also reduces the number of cycle slips.

Cardiorespiratory Fitness Levels among U.S. Youth Aged 12-15 Years: United States, 1999-2004 and 2012

MedlinePlus

... use a complex, stratified, multistage probability cluster sampling design. NHANES data collection is based on a nationally ... conjunction with the 2012 NHANES and the survey design was based on the design for NHANES, with ...

Dietary Supplement Use Among U.S. Adults Has Increased Since NHANES III (1988-1994)

MedlinePlus

... uses a complex, stratified, multistage probability cluster sampling design and oversamples in order to increase precision in estimates for certain groups. NHANES III was one in a series of periodic surveys conducted in two cycles during ...

Grouping methods for estimating the prevalences of rare traits from complex survey data that preserve confidentiality of respondents.

PubMed

Hyun, Noorie; Gastwirth, Joseph L; Graubard, Barry I

2018-03-26

Originally, 2-stage group testing was developed for efficiently screening individuals for a disease. In response to the HIV/AIDS epidemic, 1-stage group testing was adopted for estimating prevalences of a single or multiple traits from testing groups of size q, so individuals were not tested. This paper extends the methodology of 1-stage group testing to surveys with sample weighted complex multistage-cluster designs. Sample weighted-generalized estimating equations are used to estimate the prevalences of categorical traits while accounting for the error rates inherent in the tests. Two difficulties arise when using group testing in complex samples: (1) How does one weight the results of the test on each group as the sample weights will differ among observations in the same group. Furthermore, if the sample weights are related to positivity of the diagnostic test, then group-level weighting is needed to reduce bias in the prevalence estimation; (2) How does one form groups that will allow accurate estimation of the standard errors of prevalence estimates under multistage-cluster sampling allowing for intracluster correlation of the test results. We study 5 different grouping methods to address the weighting and cluster sampling aspects of complex designed samples. Finite sample properties of the estimators of prevalences, variances, and confidence interval coverage for these grouping methods are studied using simulations. National Health and Nutrition Examination Survey data are used to illustrate the methods. Copyright © 2018 John Wiley & Sons, Ltd.

Multistage Spatial Property Based Segmentation for Quantification of Fluorescence Distribution in Cells

NASA Astrophysics Data System (ADS)

Zhang, Guangyun; Jia, Xiuping; Pham, Tuan D.; Crane, Denis I.

2010-01-01

The interpretation of the distribution of fluorescence in cells is often by simple visualization of microscope-derived images for qualitative studies. In other cases, however, it is desirable to be able to quantify the distribution of fluorescence using digital image processing techniques. In this paper, the challenges of fluorescence segmentation due to the noise present in the data are addressed. We report that intensity measurements alone do not allow separation of overlapping data between target and background. Consequently, spatial properties derived from neighborhood profile were included. Mathematical Morphological operations were implemented for cell boundary extraction and a window based contrast measure was developed for fluorescence puncta identification. All of these operations were applied in the proposed multistage processing scheme. The testing results show that the spatial measures effectively enhance the target separability.

A Profile of Puerto Rican Health in the United States: Data from the Hispanic Health and Nutrition Examination Survey 1982-84.

ERIC Educational Resources Information Center

Munoz, Eric; And Others

The health conditions and health status of Hispanic Americans will assume increased importance as their population increases. The goal of this book of charts is to present data from the Hispanic Health and Nutrition Examination Survey (HHANES) on Puerto Ricans. The Puerto Rican HHANES sampling procedure is a multi-stage probability sample of…

Private Universities in Kenya Seek Alternative Ways to Manage Change in Teacher Education Curriculum in Compliance with the Commission for University Education Reforms

ERIC Educational Resources Information Center

Amimo, Catherine Adhiambo

2016-01-01

This study investigated management of change in teacher education curriculum in Private universities in Kenya. The study employed a concurrent mixed methods design that is based on the use of both quantitative and qualitative approaches. A multi-stage sampling process which included purposive, convenience, cluster, and snowball sampling methods…

Relationship between the Religious Attitude, Self-Efficacy, and Life Satisfaction in High School Teachers of Mahshahr City

ERIC Educational Resources Information Center

Bigdeloo, Masoomeh; Bozorgi, Zahra Dasht

2016-01-01

This study aims to investigate the relationship between the religious attitude, self-efficacy, and life satisfaction in high school teachers of Mahshahr City. To this end, 253 people of all high school teachers in Mahshahr City, in Iran were selected as the sample using the multistage cluster sampling method. For data collection, Glock and Stark's…

Multiple Imputation in Two-Stage Cluster Samples Using The Weighted Finite Population Bayesian Bootstrap.

PubMed

Zhou, Hanzhi; Elliott, Michael R; Raghunathan, Trivellore E

2016-06-01

Multistage sampling is often employed in survey samples for cost and convenience. However, accounting for clustering features when generating datasets for multiple imputation is a nontrivial task, particularly when, as is often the case, cluster sampling is accompanied by unequal probabilities of selection, necessitating case weights. Thus, multiple imputation often ignores complex sample designs and assumes simple random sampling when generating imputations, even though failing to account for complex sample design features is known to yield biased estimates and confidence intervals that have incorrect nominal coverage. In this article, we extend a recently developed, weighted, finite-population Bayesian bootstrap procedure to generate synthetic populations conditional on complex sample design data that can be treated as simple random samples at the imputation stage, obviating the need to directly model design features for imputation. We develop two forms of this method: one where the probabilities of selection are known at the first and second stages of the design, and the other, more common in public use files, where only the final weight based on the product of the two probabilities is known. We show that this method has advantages in terms of bias, mean square error, and coverage properties over methods where sample designs are ignored, with little loss in efficiency, even when compared with correct fully parametric models. An application is made using the National Automotive Sampling System Crashworthiness Data System, a multistage, unequal probability sample of U.S. passenger vehicle crashes, which suffers from a substantial amount of missing data in "Delta-V," a key crash severity measure.

Multiple Imputation in Two-Stage Cluster Samples Using The Weighted Finite Population Bayesian Bootstrap

PubMed Central

Zhou, Hanzhi; Elliott, Michael R.; Raghunathan, Trivellore E.

2017-01-01

Multistage sampling is often employed in survey samples for cost and convenience. However, accounting for clustering features when generating datasets for multiple imputation is a nontrivial task, particularly when, as is often the case, cluster sampling is accompanied by unequal probabilities of selection, necessitating case weights. Thus, multiple imputation often ignores complex sample designs and assumes simple random sampling when generating imputations, even though failing to account for complex sample design features is known to yield biased estimates and confidence intervals that have incorrect nominal coverage. In this article, we extend a recently developed, weighted, finite-population Bayesian bootstrap procedure to generate synthetic populations conditional on complex sample design data that can be treated as simple random samples at the imputation stage, obviating the need to directly model design features for imputation. We develop two forms of this method: one where the probabilities of selection are known at the first and second stages of the design, and the other, more common in public use files, where only the final weight based on the product of the two probabilities is known. We show that this method has advantages in terms of bias, mean square error, and coverage properties over methods where sample designs are ignored, with little loss in efficiency, even when compared with correct fully parametric models. An application is made using the National Automotive Sampling System Crashworthiness Data System, a multistage, unequal probability sample of U.S. passenger vehicle crashes, which suffers from a substantial amount of missing data in “Delta-V,” a key crash severity measure. PMID:29226161

Novel methodology for wide-ranged multistage morphing waverider based on conical theory

NASA Astrophysics Data System (ADS)

Liu, Zhen; Liu, Jun; Ding, Feng; Xia, Zhixun

2017-11-01

This study proposes the wide-ranged multistage morphing waverider design method. The flow field structure and aerodynamic characteristics of multistage waveriders are also analyzed. In this method, the multistage waverider is generated in the same conical flowfield, which contains a free-stream surface and different compression-stream surfaces. The obtained results show that the introduction of the multistage waverider design method can solve the problem of aerodynamic performance deterioration in the off-design state and allow the vehicle to always maintain the optimal flight state. The multistage waverider design method, combined with transfiguration flight strategy, can lead to greater design flexibility and the optimization of hypersonic wide-ranged waverider vehicles.

A Study to Find Out the Full Immunization Coverage of 12 to 23-month old Children and Areas of Under-Performance using LQAS Technique in a Rural Area of Tripura.

PubMed

Datta, Anjan; Baidya, Subrata; Datta, Srabani; Mog, Chanda; Das, Shampa

2017-02-01

It is very important to analyze the factors which acts as obstacle in achieving 100% immunization among children. Lot Quality Assurance Sampling (LQAS) is one of the effective method to assess such barriers. To assess the full immunization coverage among 12 to 23-month old children of rural field practice area under Department of Community Medicine, Agartala Government Medical College and identify the factors for failure of full immunization. A community based cross-sectional study was conducted from November 2013 to October 2014 on children aged 12 to 23 months old of area under Mohanpur Community health centre. Using LQAS technique 330 samples were selected with multi-stage sampling, each sub-centre being one lot and two calculated to be the decision value. Data was collected using pre-designed pre-tested questionnaire during home visit and verifying immunization card and analysed by computer software SPSS version 21.0. The full immunization coverage among 12 to 23 months old children of Mohanpur area was found as 91.67%. Out of all the 22 sub-centres, 36.36% was found under performing as per pre-fixed criteria and the main reasons for failure of full immunization in those areas are unawareness of need of subsequent doses of vaccines and illness of the children. LQAS is an effective method to identify areas of under-performance even though overall full immunization coverage is high.

American Healthy Homes Survey: A National Study of Residential Pesticides Measured from Floor Wipes.

EPA Science Inventory

The U.S. Department of Housing and Urban Development in collaboration with the United States Environmental Protection Agency conducted a survey measuring lead, allergens, and insecticides in a randomly selected nationally representative sample of resodential homes. Multistage sa...

Work Adjustment of Vocational Education Teachers.

ERIC Educational Resources Information Center

Muncrief, Martha Crawford

To investigate work adjustment of vocational education teachers, a nation-wide study was conducted focusing on vocational needs, job satisfaction, and job success. The study involved 180 secondary teachers from three vocational areas, business, home economics, and industrial education. A multistage sampling process was utilized to select…

ERTS data user investigation to develop a multistage forest sampling inventory system

NASA Technical Reports Server (NTRS)

Langley, P. G.; Vanroessel, J. W. (Principal Investigator)

1973-01-01

The author has identified the following significant results. A unique digital timber volume estimation system was developed for use with the MSS CCT tapes. The system was tested on a 64-square mile area in Northern California's Trinity Alps. The outcome of a systematic experiment, in which several possible combinations of bands 5 and 7 and a contrast measure were tried, showed that an estimated gain in precision of 50% can be obtained in a multistage sampling design. The difference between bands 5 and 7 proved to be of special importance for the estimation of biomass in the form of timber volume. In addition, an interpretation model for high flight U2 photographs was developed. A maximum multiple correlation coefficient of 0.74 was obtained for the regression model, explaining 55% of the variation in timber volume as estimated from aerial photos and ground measurments. An interpretation model for MSS color composites is in the testing stage.

A microprocessor-based automation test system for the experiment of the multi-stage compressor

NASA Astrophysics Data System (ADS)

Zhang, Huisheng; Lin, Chongping

1991-08-01

An automation test system that is controlled by the microprocessor and used in the multistage compressor experiment is described. Based on the analysis of the compressor experiment performances, a complete hardware system structure is set up. It is composed of a IBM PC/XT computer, a large scale sampled data system, the moving machine with three directions, the scanners, the digital instrumentation and some output devices. A program structure of real-time software system is described. The testing results show that this test system can take the measure of many parameter magnitudes in the blade row places and on a boundary layer in different states. The automatic extent and the accuracy of experiment is increased and the experimental cost is reduced.

SAS procedures for designing and analyzing sample surveys

USGS Publications Warehouse

Stafford, Joshua D.; Reinecke, Kenneth J.; Kaminski, Richard M.

2003-01-01

Complex surveys often are necessary to estimate occurrence (or distribution), density, and abundance of plants and animals for purposes of re-search and conservation. Most scientists are familiar with simple random sampling, where sample units are selected from a population of interest (sampling frame) with equal probability. However, the goal of ecological surveys often is to make inferences about populations over large or complex spatial areas where organisms are not homogeneously distributed or sampling frames are in-convenient or impossible to construct. Candidate sampling strategies for such complex surveys include stratified,multistage, and adaptive sampling (Thompson 1992, Buckland 1994).

Association between HIV status and depressive symptoms among children and adolescents in the Southern Highlands Zone, Tanzania: A case-control study.

PubMed

Lwidiko, Abraham; Kibusi, Stephen Matthew; Nyundo, Azan; Mpondo, Bonaventura C T

2018-01-01

Children and adolescents continue to have HIV/AIDS in southern Saharan Africa. Scaling up of HIV services has significantly improved access to ARV and consequently improved on morbidity and mortality related to HIV/AIDS including opportunistic infection. Despite the above efforts, non-communicable conditions including mental disorders such as depression have been observed to contribute to the burden of disabilities about which little is documented. This study, therefore, aimed to determine the magnitude of depressive symptoms and the associated factors among HIV-infected children and adolescents. The study was a matched case-control design involving 300 cases of HIV-infected children matched by age and sex against 600 uninfected controls. Systematic sampling technique was used to select the cases while multistage sampling technique was employed to identify villages/ streets purposive and sampling technique was employed to obtain participants from households. The overall prevalence of depressive symptoms among the cohort of 900 participants was found to be 12.9%, with 27% of HIV-infected and 5.8% of HIV-uninfected children and adolescents screened positive for depressive symptoms. Multiple logistic regression revealed that being HIV-infected (AOR 1.96(1.11-3.45)), residing in a rural setting (AOR 0.61(0.39-0.96)) and history of childhood deprivation (AOR 4.76 (2.79-8.13)) were significantly associated with depressive symptoms. HIV infected adolescents are more affected by depression compared to non-infected counterparts. Childhood deprivation was significantly associated with presence of depressive symptoms. Integration of mental health evaluation and treatment into the HIV care provided for adolescents can be beneficial. More studies to delineate factors associated with depressed adolescents with HIV may add value to the body of knowledge and overall improvement of care.

Are Korean secondary school girls physically active during leisure time?

PubMed

Cho, Minhaeng; Kwon, Wook-Dong; Jeon, Yong-Bae

2010-03-01

Our aims in this study were to identify the types of physical activity during leisure time and to determine if Korean secondary school girls participate in enough physical activity during leisure time to promote health. Of the 1,088 girls randomly selected by a multistaged cluster sampling technique, 705 girls completed questionnaires. Seventy-five percent of Korean secondary school girls spent time on individualized or noncompetitive activities, and 88.3% of them were classified into underactive and inactive levels with no gained health benefits during leisure time. No significant differences were observed in the physical activity levels between middle school girls and high school girls. The results of this study may be explained by the lack of perceived appropriateness for secondary school girls' participation in physical activity, which traditionally did not favor them participating in dynamic physical activities and sufficient physical activity level to gain health benefits.

Joint channel estimation and multi-user detection for multipath fading channels in DS-CDMA systems

NASA Astrophysics Data System (ADS)

Wu, Sau-Hsuan; Kuo, C.-C. Jay

2002-11-01

The technique of joint blind channel estimation and multiple access interference (MAI) suppression for an asynchronous code-division multiple-access (CDMA) system is investigated in this research. To identify and track dispersive time-varying fading channels and to avoid the phase ambiguity that come with the second-order statistic approaches, a sliding-window scheme using the expectation maximization (EM) algorithm is proposed. The complexity of joint channel equalization and symbol detection for all users increases exponentially with system loading and the channel memory. The situation is exacerbated if strong inter-symbol interference (ISI) exists. To reduce the complexity and the number of samples required for channel estimation, a blind multiuser detector is developed. Together with multi-stage interference cancellation using soft outputs provided by this detector, our algorithm can track fading channels with no phase ambiguity even when channel gains attenuate close to zero.

Regional agriculture surveys using ERTS-1 data

NASA Technical Reports Server (NTRS)

Draeger, W. C.; Nichols, J. D.; Benson, A. S.; Larrabee, D. G.; Jenkus, W. M.; Hay, C. M.

1974-01-01

The Center for Remote Sensing Research has conducted studies designed to evaluate the potential application of ERTS data in performing agricultural inventories, and to develop efficient methods of data handling and analysis useful in the operational context for performing large area surveys. This work has resulted in the development of an integrated system utilizing both human and computer analysis of ground, aerial, and space imagery, which has been shown to be very efficient for regional crop acreage inventories. The technique involves: (1) the delineation of ERTS images into relatively homogeneous strata by human interpreters, (2) the point-by-point classification of the area within each strata on the basis of crop type using a human/machine interactive digital image processing system; and (3) a multistage sampling procedure for the collection of supporting aerial and ground data used in the adjustment and verification of the classification results.

The effect of asthma education program on knowledge of school teachers: a randomized controlled trial.

PubMed

Kawafha, Mariam M; Tawalbeh, Loai Issa

2015-04-01

The purpose of this study was to examine the effect of an asthma education program on schoolteachers' knowledge. Pre-test-post-test experimental randomized controlled design was used. A multistage-cluster sampling technique was used to randomly select governorate, primary schools, and schoolteachers. Schoolteachers were randomly assigned either to the experimental group (n = 36) and attended three educational sessions or to the control group (n = 38) who did not receive any intervention. Knowledge about asthma was measured using the Asthma General Knowledge Questionnaire for Adults (AGKQA). The results indicated that teachers in the experimental group showed significantly (p < .001) higher knowledge of asthma in the first post-test and the second post-test compared with those in the control group. Implementing asthma education enhanced schoolteachers' knowledge of asthma. The asthma education program should target schoolteachers to improve knowledge about asthma. © The Author(s) 2014.

The association of urbanisation with the prevalence of dental caries among schoolchildren in Nigeria new capital territory.

PubMed

el-Nadeef, M A; Adegbembo, A O; Honkala, E

1998-02-01

The aim of this study was to examine the association of urbanisation and social class with dental caries. A multi-stage stratified cluster sampling technique was used to select schoolchildren (n = 915). Clinical examination was carried out in daylight according to WHO criteria. The distribution of the subjects between strata was: 315 (urban); 303 (semi-urban) and 297 (rural). The mean age of subjects in each strata was 11.4 years. The mean number of decayed teeth (DT) in the respective strata were 27 per cent; 24 per cent; and 12 per cent. Urban children and semi-urban had higher risk for caries than their rural reference group. Urbanisation had no significant effect on the caries prevalence when social class was controlled except among subjects from the low social class in semi-urban areas. The development of satellite towns around big cities do have implications for planning oral health services.

Dietary habits and physical activity levels in Jordanian adolescents attending private versus public schools.

PubMed

Tayyem, R F; Al-Hazzaa, H M; Abu-Mweis, S S; Bawadi, H A; Hammad, S S; Musaiger, A O

2014-07-08

The present study examined differences in dietary habits and physical activity levels between students attending private and public high schools in Jordan. A total of 386 secondary-school males and 349 females aged 14-18 years were randomly recruited using a multistage, stratified, cluster sampling technique. Dietary habits and physical activity level were self-reported in a validated questionnaire. The prevalence of obesity was significantly higher among adolescents in private (26.0%) than in public schools (16.7%). The frequency of breakfast intake was significantly higher among adolescents in private schools, whereas French fries and sweets intake was significantly higher in public schools. Television viewing showed a significant interaction with school type by sex. A higher rate of inactivity was found among students attending private schools. Despite a slightly better overall dietary profile for students in private schools, they had a higher rate of overweight and obesity compared with those in public schools.

GLS-Finder: A Platform for Fast Profiling of Glucosinolates in Brassica Vegetables.

PubMed

Sun, Jianghao; Zhang, Mengliang; Chen, Pei

2016-06-01

Mass spectrometry combined with related tandem techniques has become the most popular method for plant secondary metabolite characterization. We introduce a new strategy based on in-database searching, mass fragmentation behavior study, formula predicting for fast profiling of glucosinolates, a class of important compounds in brassica vegetables. A MATLAB script-based expert system computer program, "GLS-Finder", was developed. It is capable of qualitative and semi-quantitative analyses of glucosinolates in samples using data generated by ultrahigh-performance liquid chromatography-high-resolution accurate mass with multi-stage mass fragmentation (UHPLC-HRAM/MS(n)). A suite of bioinformatic tools was integrated into the "GLS-Finder" to perform raw data deconvolution, peak alignment, glucosinolate putative assignments, semi-quantitation, and unsupervised principal component analysis (PCA). GLS-Finder was successfully applied to identify intact glucosinolates in 49 commonly consumed Brassica vegetable samples in the United States. It is believed that this work introduces a new way of fast data processing and interpretation for qualitative and quantitative analyses of glucosinolates, where great efficacy was improved in comparison to identification manually.

Prevalence of self-medication among university students in Baghdad: a cross-sectional study from Iraq.

PubMed

Al-Ameri, Rawa J K; Abd Al-Badri, Husham J; Lafta, Riyadh K

2017-03-30

The objective of this study is to find out the prevalence and determinants of self-medication among college students in Baghdad, Iraq. A cross-sectional survey was conducted in Al-Mustansiriyah and Al-Nahrain universities, Baghdad, from January to April 2015. A multistage random sampling technique was adopted to collect data from 1435 college students using a questionnaire form. The mean age of the joining students was 19.8 years. Females form 53% of the sample. Self-medications use was prevalent among 92.4% of students. Antipyretics and antibiotics were the most used medicines. Self-medication was higher among urban residents (OR= 7.99, P < 0.001). Students living with their families practiced self-medication more than others (OR= 2.501, P = 0.037). Students at health-related colleges showed greater resilience to self-medication (OR=0.455, P = 0.001). Despite free access to healthcare institutions, nine out of ten college students from Baghdad universities have practiced self-medication. Education of students about the safe use of medications and supervision of pharmacies are effective ways to control this malpractice.

Esthetic perception and psychosocial impact of developmental enamel defects among Malaysian adolescents.

PubMed

Sujak, Sharol Lail; Abdul Kadir, Rahimah; Dom, Tuti Ningseh Mohd

2004-12-01

The aim of this study was to investigate the prevalence and psychosocial impact of enamel defects among 16-year-old school children on the island of Penang. The data were collected through a self-administered questionnaire survey and an oral examination, using the Modified Developmental Defects of Enamel Index (FDI, 1992). In all, 1024 subjects were selected using a multistage random sampling technique. About two-thirds of the sample (67.1%) had at least one tooth affected by enamel defects. Enamel opacities accounted for 85.6% of the total condition. Diffuse-type opacity predominated (63.5%). Among subjects who expressed dissatisfaction, 18.8% reported covering their mouths when smiling, 8.7% avoided going out with friends and 39.1% had consulted their dentists. About 17% of the subjects reported that their parents had complained about the color of their front teeth but only 5.7% had experienced being teased by their friends about the problem. Two-thirds of the subjects were affected by enamel defects involving at least one tooth; however, the esthetic perception and psychosocial impact of those affected were minor.

American Healthy Homes Survey: A National Study of Residential Phthalates Measured from Floor Wipes

EPA Science Inventory

The United States Environmental Protection Agency (U.S. EPA), in collaboration with the U.S. Department of Housing and Urban Development (HUD), conducted a survey measuring phthalates in randomly selected residential homes throughout the U.S. Multistage sampling with clustering w...

Pathways between Acculturation and Health: Does the Measure Matter?

ERIC Educational Resources Information Center

Miranda, Patricia Y.; Gonzalez, Hector M.; Tarraf, Wassim

2011-01-01

The purpose of this study was to assess the association between acculturation and functional health using multiple proxies of acculturation to examine explanatory pathways to clarify disparate health findings. A population-based cross-sectional, multistage probability sample from the Hispanic Established Populations for the Epidemiologic Studies…

Entrepreneurial Attributes among Postgraduate Students of a Pakistani University

ERIC Educational Resources Information Center

Ali, Akhtar; Topping, Keith J.; Tariq, Riaz H.

2010-01-01

This paper explores entrepreneurial attributes among the students of The Islamia University of Bahawalpur, a public sector Pakistani university. Multistage sampling was employed to maximize the representation. Five hundred and twenty one master's level students from thirty departments returned completed questionnaires. Three factors emerged: self…

Health and Dietary Patterns of the Elderly in Botswana

ERIC Educational Resources Information Center

Maruapula, Segametsi; Chapman-Novakofski, Karen

2007-01-01

Objective: To describe associations among socioeconomic conditions and dietary patterns of Botswana elderly. Design: Secondary analysis from a cross-sectional nationwide survey. Participants: Subjects (N = 1086, 60-99 years old) were selected after multistage sampling. Main Outcome Measures: Dietary patterns were dependent variables; health and…

SOURCE SAMPLING FINE PARTICULATE MATTER: WOOD-FIRED INDUSTRIAL BOILER

EPA Science Inventory

The report provides a profile for a wood-fired industrial boiler equipped with a multistage electrostatic precipitator control device. Along with the profile of emissions of fine particulate matter of aerodynamic diameter of 2.5 micrometers or less (PM-2.5), data are also provide...

Reducing dislocations in semiconductors utilizing repeated thermal cycling during multistage epitaxial growth

DOEpatents

Fan, John C. C.; Tsaur, Bor-Yeu; Gale, Ronald P.; Davis, Frances M.

1992-02-25

Dislocation densities are reduced in growing semiconductors from the vapor phase by employing a technique of interrupting growth, cooling the layer so far deposited, and then repeating the process until a high quality active top layer is achieved. The method of interrupted growth, coupled with thermal cycling, permits dislocations to be trapped in the initial stages of epitaxial growth.

Reducing dislocations in semiconductors utilizing repeated thermal cycling during multistage epitaxial growth

DOEpatents

Fan, John C. C.; Tsaur, Bor-Yeu; Gale, Ronald P.; Davis, Frances M.

1986-12-30

Dislocation densities are reduced in growing semiconductors from the vapor phase by employing a technique of interrupting growth, cooling the layer so far deposited, and then repeating the process until a high quality active top layer is achieved. The method of interrupted growth, coupled with thermal cycling, permits dislocations to be trapped in the initial stages of epitaxial growth.

Multipurpose image watermarking algorithm based on multistage vector quantization.

PubMed

Lu, Zhe-Ming; Xu, Dian-Guo; Sun, Sheng-He

2005-06-01

The rapid growth of digital multimedia and Internet technologies has made copyright protection, copy protection, and integrity verification three important issues in the digital world. To solve these problems, the digital watermarking technique has been presented and widely researched. Traditional watermarking algorithms are mostly based on discrete transform domains, such as the discrete cosine transform, discrete Fourier transform (DFT), and discrete wavelet transform (DWT). Most of these algorithms are good for only one purpose. Recently, some multipurpose digital watermarking methods have been presented, which can achieve the goal of content authentication and copyright protection simultaneously. However, they are based on DWT or DFT. Lately, several robust watermarking schemes based on vector quantization (VQ) have been presented, but they can only be used for copyright protection. In this paper, we present a novel multipurpose digital image watermarking method based on the multistage vector quantizer structure, which can be applied to image authentication and copyright protection. In the proposed method, the semi-fragile watermark and the robust watermark are embedded in different VQ stages using different techniques, and both of them can be extracted without the original image. Simulation results demonstrate the effectiveness of our algorithm in terms of robustness and fragility.

Vibration based condition monitoring of a multistage epicyclic gearbox in lifting cranes

NASA Astrophysics Data System (ADS)

Assaad, Bassel; Eltabach, Mario; Antoni, Jérôme

2014-01-01

This paper proposes a model-based technique for detecting wear in a multistage planetary gearbox used by lifting cranes. The proposed method establishes a vibration signal model which deals with cyclostationary and autoregressive models. First-order cyclostationarity is addressed by the analysis of the time synchronous average (TSA) of the angular resampled vibration signal. Then an autoregressive model (AR) is applied to the TSA part in order to extract a residual signal containing pertinent fault signatures. The paper also explores a number of methods commonly used in vibration monitoring of planetary gearboxes, in order to make comparisons. In the experimental part of this study, these techniques are applied to accelerated lifetime test bench data for the lifting winch. After processing raw signals recorded with an accelerometer mounted on the outside of the gearbox, a number of condition indicators (CIs) are derived from the TSA signal, the residual autoregressive signal and other signals derived using standard signal processing methods. The goal is to check the evolution of the CIs during the accelerated lifetime test (ALT). Clarity and fluctuation level of the historical trends are finally considered as a criteria for comparing between the extracted CIs.

Multi-stage ranking of emergency technology alternatives for water source pollution accidents using a fuzzy group decision making tool.

PubMed

Qu, Jianhua; Meng, Xianlin; You, Hong

2016-06-05

Due to the increasing number of unexpected water source pollution events, selection of the most appropriate disposal technology for a specific pollution scenario is of crucial importance to the security of urban water supplies. However, the formulation of the optimum option is considerably difficult owing to the substantial uncertainty of such accidents. In this research, a multi-stage technical screening and evaluation tool is proposed to determine the optimal technique scheme, considering the areas of pollutant elimination both in drinking water sources and water treatment plants. In stage 1, a CBR-based group decision tool was developed to screen available technologies for different scenarios. Then, the threat degree caused by the pollution was estimated in stage 2 using a threat evaluation system and was partitioned into four levels. For each threat level, a corresponding set of technique evaluation criteria weights was obtained using Group-G1. To identify the optimization alternatives corresponding to the different threat levels, an extension of TOPSIS, a multi-criteria interval-valued trapezoidal fuzzy decision making technique containing the four arrays of criteria weights, to a group decision environment was investigated in stage 3. The effectiveness of the developed tool was elaborated by two actual thallium-contaminated scenarios associated with different threat levels. Copyright © 2016 Elsevier B.V. All rights reserved.

Assessment of Validity, Reliability and Difficulty Indices for Teacher-Built Physics Exam Questions in First Year High School

ERIC Educational Resources Information Center

Jandaghi, Gholamreza

2010-01-01

The purpose of the research is to determine high school teachers' skill rate in designing exam questions in physics subject. The statistical population was all of physics exam shits for two semesters in one school year from which a sample of 364 exam shits was drawn using multistage cluster sampling. Two experts assessed the shits and by using…

Bayer Digester Optimization Studies using Computer Techniques

NASA Astrophysics Data System (ADS)

Kotte, Jan J.; Schleider, Victor H.

Theoretically required heat transfer performance by the multistaged flash heat reclaim system of a high pressure Bayer digester unit is determined for various conditions of discharge temperature, excess flash vapor and indirect steam addition. Solution of simultaneous heat balances around the digester vessels and the heat reclaim system yields the magnitude of available heat for representation of each case on a temperature-enthalpy diagram, where graphical fit of the number of flash stages fixes the heater requirements. Both the heat balances and the trial-and-error graphical solution are adapted to solution by digital computer techniques.

Use of the Boomerang catalyst advantage closure device to facilitate complex multistaged percutaneous revascularization procedures for the treatment of critical limb ischemia.

PubMed

Garcia, Joel A; Casserly, Ivan P

2009-07-01

An increasing spectrum of complex peripheral arterial disease may be successfully treated using percutaneous revascularization techniques. A pair of challenging peripheral revascularization procedures in patients with critical limb ischemia is presented, where an array of interventional tools and techniques were required, and the off-label use of the Boomerang catalyst system closure device was important in managing a variety of complex arterial access issues and ultimately allowing procedural success. Copyright 2009 Wiley-Liss, Inc.

Sequencing Cyclic Peptides by Multistage Mass Spectrometry

PubMed Central

Mohimani, Hosein; Yang, Yu-Liang; Liu, Wei-Ting; Hsieh, Pei-Wen; Dorrestein, Pieter C.; Pevzner, Pavel A.

2012-01-01

Some of the most effective antibiotics (e.g., Vancomycin and Daptomycin) are cyclic peptides produced by non-ribosomal biosynthetic pathways. While hundreds of biomedically important cyclic peptides have been sequenced, the computational techniques for sequencing cyclic peptides are still in their infancy. Previous methods for sequencing peptide antibiotics and other cyclic peptides are based on Nuclear Magnetic Resonance spectroscopy, and require large amount (miligrams) of purified materials that, for most compounds, are not possible to obtain. Recently, development of mass spectrometry based methods has provided some hope for accurate sequencing of cyclic peptides using picograms of materials. In this paper we develop a method for sequencing of cyclic peptides by multistage mass spectrometry, and show its advantages over single stage mass spectrometry. The method is tested on known and new cyclic peptides from Bacillus brevis, Dianthus superbus and Streptomyces griseus, as well as a new family of cyclic peptides produced by marine bacteria. PMID:21751357

Evaluation method of membrane performance in membrane distillation process for seawater desalination.

PubMed

Chung, Seungjoon; Seo, Chang Duck; Choi, Jae-Hoon; Chung, Jinwook

2014-01-01

Membrane distillation (MD) is an emerging desalination technology as an energy-saving alternative to conventional distillation and reverse osmosis method. The selection of appropriate membrane is a prerequisite for the design of an optimized MD process. We proposed a simple approximation method to evaluate the performance of membranes for MD process. Three hollow fibre-type commercial membranes with different thicknesses and pore sizes were tested. Experimental results showed that one membrane was advantageous due to the highest flux, whereas another membrane was due to the lowest feed temperature drop. Regression analyses and multi-stage calculations were used to account for the trade-offeffects of flux and feed temperature drop. The most desirable membrane was selected from tested membranes in terms of the mean flux in a multi-stage process. This method would be useful for the selection of the membranes without complicated simulation techniques.

Alcohol and Sexual Consent Scale: Development and Validation

ERIC Educational Resources Information Center

Ward, Rose Marie; Matthews, Molly R.; Weiner, Judith; Hogan, Kathryn M.; Popson, Halle C.

2012-01-01

Objective: To establish a short measure of attitudes toward sexual consent in the context of alcohol consumption. Methods: Using a multistage and systematic measurement development process, the investigators developed the Alcohol and Sexual Consent Scale using a sample of college students. Results: The resulting 12-item scale, the Alcohol and…

Rydberg Spectroscopy of Zeeman-Decelerated Beams of Metastable Helium Molecules

NASA Astrophysics Data System (ADS)

Jansen, Paul; Motsch, Michael; Sprecher, Daniel; Merkt, Frederic

2014-06-01

Having three and four electrons, respectively, He_2^+ and He_2 represent systems for which highly accurate ab-initio calculations might become feasible in the near future. With the goal of performing accurate measurements of the rovibrational energy-level structure of He_2^+ by Rydberg spectroscopy of He_2 and multichannel quantum-defect theory extrapolation techniques, we have produced samples of helium molecules in the a ^3Σu^+ state in supersonic beams with velocities tunable down to 100 m/s by combining a cryogenic supersonic-beam source with a multistage Zeeman decelerator. The molecules are formed at an initial velocity of 500 m/s by striking a discharge in the pulsed expansion of helium gas from a reservoir kept at a cryogenic temperature of 10 K. Using rotationally-resolved PFI-ZEKE (pulsed-field-ionization zero-kinetic-energy) photoelectron spectroscopy, we have probed the rotational-state distribution of the molecules produced in the discharge and found vibrational levels up to ν" = 2 and rotational levels up to N"=21 to be populated. The molecular beam is coupled to a multistage Zeeman decelerator that employs pulsed inhomogeneous magnetic fields to further reduce the beam velocity. By measuring the quantum-state distribution of the decelerated sample using photoelectron and photoionization spectroscopy we observed no rotational or vibrational state-selectivity of the deceleration process, but found that one of the three spin-rotation components of the He_2 a ^3Σu^+ rotational levels is eliminated. W.-C. Tung, M. Pavanello, L. Adamowicz, J. Chem. Phys. 136, 104309 (2012). D. Sprecher, J. Liu, T. Krähenmann, M. Schäfer, and F. Merkt, J. Chem. Phys. 140, 064304 (2014). M. Motsch, P. Jansen, J. A. Agner, H. Schmutz, and F. Merkt, arXiv:1401.7774. N. Vanhaecke, U. Meier, M. Andrist, B. H. Meier, and F. Merkt, Phys. Rev. A 75, 031402(R) (2007).

Multiple reaction monitoring with multistage fragmentation (MRM3) detection enhances selectivity for LC-MS/MS analysis of plasma free metanephrines.

PubMed

Wright, Michael J; Thomas, Rebecca L; Stanford, Phoebe E; Horvath, Andrea R

2015-03-01

LC-MS/MS with multiple reaction monitoring (MRM) is a powerful tool for quantifying target analytes in complex matrices. However, the technique lacks selectivity when plasma free metanephrines are measured. We propose the use of multistage fragmentation (MRM(3)) to improve the analytical selectivity of plasma free metanephrine measurement. Metanephrines were extracted from plasma with weak cation exchange solid-phase extraction before separation by hydrophilic interaction liquid chromatography. We quantified normetanephrine and metanephrine by either MRM or MRM(3) transitions m/z 166→134→79 and m/z 180→149→121, respectively. Over a 6-month period, approximately 1% (n = 21) of patient samples showed uncharacterized coeluting substances that interfered with the routine assay, resulting in an inability to report results. Quantification with MRM(3) removed these interferences and enabled measurement of the target compounds. For patient samples unaffected by interferences, Deming regression analysis demonstrated a correlation between MRM(3) and MRM methods of y = 1.00x - 0.00 nmol/L for normetanephrine and y = 0.99x + 0.03 nmol/L for metanephrine. Between the MRM(3) method and the median of all LC-MS/MS laboratories enrolled in a quality assurance program, the correlations were y = 0.97x + 0.03 nmol/L for normetanephrine and y = 1.03x - 0.04 nmol/L for metanephrine. Imprecision for the MRM(3) method was 6.2%-7.0% for normetanephrine and 6.1%-9.9% for metanephrine (n = 10). The lower limits of quantification for the MRM(3) method were 0.20 nmol/L for normetanephrine and 0.16 nmol/L for metanephrine. The use of MRM(3) technology improves the analytical selectivity of plasma free metanephrine quantification by LC-MS/MS while demonstrating sufficient analytical sensitivity and imprecision. © 2014 American Association for Clinical Chemistry.

Optimized FPGA Implementation of Multi-Rate FIR Filters Through Thread Decomposition

NASA Technical Reports Server (NTRS)

Zheng, Jason Xin; Nguyen, Kayla; He, Yutao

2010-01-01

Multirate (decimation/interpolation) filters are among the essential signal processing components in spaceborne instruments where Finite Impulse Response (FIR) filters are often used to minimize nonlinear group delay and finite-precision effects. Cascaded (multi-stage) designs of Multi-Rate FIR (MRFIR) filters are further used for large rate change ratio, in order to lower the required throughput while simultaneously achieving comparable or better performance than single-stage designs. Traditional representation and implementation of MRFIR employ polyphase decomposition of the original filter structure, whose main purpose is to compute only the needed output at the lowest possible sampling rate. In this paper, an alternative representation and implementation technique, called TD-MRFIR (Thread Decomposition MRFIR), is presented. The basic idea is to decompose MRFIR into output computational threads, in contrast to a structural decomposition of the original filter as done in the polyphase decomposition. Each thread represents an instance of the finite convolution required to produce a single output of the MRFIR. The filter is thus viewed as a finite collection of concurrent threads. The technical details of TD-MRFIR will be explained, first showing its applicability to the implementation of downsampling, upsampling, and resampling FIR filters, and then describing a general strategy to optimally allocate the number of filter taps. A particular FPGA design of multi-stage TD-MRFIR for the L-band radar of NASA's SMAP (Soil Moisture Active Passive) instrument is demonstrated; and its implementation results in several targeted FPGA devices are summarized in terms of the functional (bit width, fixed-point error) and performance (time closure, resource usage, and power estimation) parameters.

Evaluation of usefulness of Skylab EREP S-190 and S-192 imagery in multistage forest surveys

NASA Technical Reports Server (NTRS)

Langley, P. G. (Principal Investigator)

1973-01-01

The author has identified the following significant results. A unique digital timber volume estimation system with digital data for two ERTS-1 MSS bands was tested. The system was tested on a 64-square mile area in Northern California's Trinity Alps. The outcome of a systematic experiment in which possible combinations of the two bands (MSS 5 and 7) were tried, showed than an estimated gain in precision of 50% can be obtained in a multistage sampling design. Especially the difference between the two bands proved to be of major importance for the estimation of biomass in the form of timber volume. Identical tests as the one performed will be conducted with various S-192 bands when the digital data become available.

Purposeful Sampling for Qualitative Data Collection and Analysis in Mixed Method Implementation Research.

PubMed

Palinkas, Lawrence A; Horwitz, Sarah M; Green, Carla A; Wisdom, Jennifer P; Duan, Naihua; Hoagwood, Kimberly

2015-09-01

Purposeful sampling is widely used in qualitative research for the identification and selection of information-rich cases related to the phenomenon of interest. Although there are several different purposeful sampling strategies, criterion sampling appears to be used most commonly in implementation research. However, combining sampling strategies may be more appropriate to the aims of implementation research and more consistent with recent developments in quantitative methods. This paper reviews the principles and practice of purposeful sampling in implementation research, summarizes types and categories of purposeful sampling strategies and provides a set of recommendations for use of single strategy or multistage strategy designs, particularly for state implementation research.

Novel product ions of 2-aminoanilide and benzimidazole Ag(I) complexes using electrospray ionization with multi-stage tandem mass spectrometry.

PubMed

Johnson, Byron S; Burinsky, David J; Burova, Svetlana A; Davis, Roman; Fitzgerald, Russ N; Matsuoka, Richard T

2012-05-15

The 2-aminoaniline scaffold is of significant value to the pharmaceutical industry and is embedded in a number of pharmacophores including 2-aminoanilides and benzimidazoles. A novel application of coordination ion spray mass spectrometry (CIS-MS) for interrogating the silver ion (Ag(+)) complexes of a homologous series of these compounds using multi-stage tandem mass spectrometry is described. Unlike the ubiquitous alkali metal ion complexes, Ag(+) complexes of 2-aminoanilides and benzimidazoles were found to yield [M - H](+) ions in significant abundance via gas-phase elimination of the metal hydride (AgH) resulting in unique product ion cascades. Sample introduction was by liquid chromatography with mass spectrometry analysis performed on a hybrid linear ion trap/orbitrap instrument capable of high-resolution measurements. Rigorous structural characterization by multi-stage tandem mass spectrometry using [M +  H](+), [M - H](-) and [M - H](+) precursor ions derived from ESI and CIS experiments was performed for the homologous series of 2-aminoanilide and benzimidazole compounds. A full tabular comparison of structural information resulting from these product ion cascades was produced. Multi-stage tandem mass spectrometry of [M - H](+) ions resulting from Ag(+) complexes of 2-aminoanilides and benzimidazoles in CIS-MS experiments produced unique product ion cascades that exhibited complementary structural information to that obtained from tandem mass spectrometry of [M  +  H](+) and [M - H](-) ions by electrospray ionization (ESI). These observations may be broadly applicable to other compounds that are observed to form Ag(+) complexes and eliminate AgH. Copyright © 2012 John Wiley & Sons, Ltd.

Pulsed depressed collector

DOEpatents

Kemp, Mark A

2015-11-03

A high power RF device has an electron beam cavity, a modulator, and a circuit for feed-forward energy recovery from a multi-stage depressed collector to the modulator. The electron beam cavity include a cathode, an anode, and the multi-stage depressed collector, and the modulator is configured to provide pulses to the cathode. Voltages of the electrode stages of the multi-stage depressed collector are allowed to float as determined by fixed impedances seen by the electrode stages. The energy recovery circuit includes a storage capacitor that dynamically biases potentials of the electrode stages of the multi-stage depressed collector and provides recovered energy from the electrode stages of the multi-stage depressed collector to the modulator. The circuit may also include a step-down transformer, where the electrode stages of the multi-stage depressed collector are electrically connected to separate taps on the step-down transformer.

Maladaptive Personality and Neuropsychological Features of Highly Relationally Aggressive Adolescent Girls

ERIC Educational Resources Information Center

Savage, Michael; DiBiase, Anne-Marie

2016-01-01

The maladaptive personality and neuropsychological features of highly relationally aggressive females were examined in a group of 30 grade 6, 7, and 8 girls and group-matched controls. Employing a multistage cluster sampling procedure, a group of highly, yet almost exclusively, relationally aggressive females were identified and matched on a…

The Effect of Computer Games on Students' Critical Thinking Disposition and Educational Achievement

ERIC Educational Resources Information Center

Seifi, Mohammad; Derikvandi, Zahra; Moosavipour, Saeed; Khodabandelou, Rouhollah

2015-01-01

The main aim of this research was to investigate the effect of computer games on student' critical thinking disposition and educational achievement. The research method was descriptive, and its type was casual-comparative. The sample included 270 female high school students in Andimeshk town selected by multistage cluster method. Ricketts…

Students' Readiness for E-Learning Application in Higher Education

ERIC Educational Resources Information Center

Rasouli, Atousa; Rahbania, Zahra; Attaran, Mohammad

2016-01-01

The main goal of this research was to investigate the readiness of art students in applying e-learning. This study adopted a survey research design. From three public Iranian Universities (Alzahra, Tarbiat Modares, and Tehran), 347 students were selected by multistage cluster sampling and via Morgan Table. Their readiness for E-learning…

Impact Evaluation of Further Mathematics Curriculum in Nigeria

ERIC Educational Resources Information Center

Odili, Godwin Alo; Asuru, Vincent A.

2011-01-01

This research was a perceptual survey study carried out to determine whether the goals of Further Mathematics Curriculum (FMC) are being achieved at the Senior Secondary School level. The sample for the study consisted of 240 FM final year students, 45 FM teachers and 180 undergraduates who were selected by a multistage stratified random sampling…

Removing a Nail from the Boot Camp Coffin: An Outcome Evaluation of Minnesota's Challenge Incarceration Program

ERIC Educational Resources Information Center

Duwe, Grant; Kerschner, Deborah

2008-01-01

Using a retrospective, quasiexperimental design, this study evaluates Minnesota's Challenge Incarceration Program (CIP), examining whether it has lowered recidivism and saved money. In addition to utilizing a lengthy follow-up period and multiple measures of recidivism and participation, a multistage sampling design was employed to create a…

A Methodology to Teach Advanced A/D Converters, Combining Digital Signal Processing and Microelectronics Perspectives

ERIC Educational Resources Information Center

Quintans, C.; Colmenar, A.; Castro, M.; Moure, M. J.; Mandado, E.

2010-01-01

ADCs (analog-to-digital converters), especially Pipeline and Sigma-Delta converters, are designed using complex architectures in order to increase their sampling rate and/or resolution. Consequently, the learning of ADC devices also encompasses complex concepts such as multistage synchronization, latency, oversampling, modulation, noise shaping,…

A Study to Find Out the Full Immunization Coverage of 12 to 23-month old Children and Areas of Under-Performance using LQAS Technique in a Rural Area of Tripura

PubMed Central

Baidya, Subrata; Datta, Srabani; Mog, Chanda; Das, Shampa

2017-01-01

Introduction It is very important to analyze the factors which acts as obstacle in achieving 100% immunization among children. Lot Quality Assurance Sampling (LQAS) is one of the effective method to assess such barriers. Aim To assess the full immunization coverage among 12 to 23-month old children of rural field practice area under Department of Community Medicine, Agartala Government Medical College and identify the factors for failure of full immunization. Materials and Methods A community based cross-sectional study was conducted from November 2013 to October 2014 on children aged 12 to 23 months old of area under Mohanpur Community health centre. Using LQAS technique 330 samples were selected with multi-stage sampling, each sub-centre being one lot and two calculated to be the decision value. Data was collected using pre-designed pre-tested questionnaire during home visit and verifying immunization card and analysed by computer software SPSS version 21.0. Results The full immunization coverage among 12 to 23 months old children of Mohanpur area was found as 91.67%. Out of all the 22 sub-centres, 36.36% was found under performing as per pre-fixed criteria and the main reasons for failure of full immunization in those areas are unawareness of need of subsequent doses of vaccines and illness of the children. Conclusion LQAS is an effective method to identify areas of under-performance even though overall full immunization coverage is high. PMID:28384892

Sexual orientation and quality of life among students of Obafemi Awolowo University (OAU), Nigeria.

PubMed

Boladale, Mapayi; Olakunle, Oginni; Olutayo, Aloba; Adesanmi, Akinsulore

2015-12-01

Sexual orientation is an individual's pattern of physical and emotional arousal toward members of the same and/or opposite gender. To determine the pattern of sexual orientation and the relationship between sexual orientation and quality of life among a sample of OAU students. A descriptive cross sectional study among 481 students of OAU using a multistage sampling technique. They completed a Socio-demographic data schedule, questions on sexual orientation and the World Health Organization Quality of Life Scale - Brief version (WHO QOL-BREF). 4.9% of the sample self-identified as bisexual while 0.1% self-identified as gay/lesbian. 11.8% of the respondents reported varying degrees of attraction to the opposite gender. The mean age of sexual debut was 17.62 (±4.05). Those who self-identified as gay/lesbian/bisexual had a lower average score on all domains of the WHO QOL-BREF. Same sex sexual attraction and practice occur among young people in Nigeria and this has sexual and reproductive health implications. GLB youth report a lower QOL compared to heterosexual counterparts and this may suggest some distress among this vulnerable group. More studies should be undertaken to explore issues raised in planning interventions and health services that would improve safe sexual practices within this group.

Forecasting peak asthma admissions in London: an application of quantile regression models.

PubMed

Soyiri, Ireneous N; Reidpath, Daniel D; Sarran, Christophe

2013-07-01

Asthma is a chronic condition of great public health concern globally. The associated morbidity, mortality and healthcare utilisation place an enormous burden on healthcare infrastructure and services. This study demonstrates a multistage quantile regression approach to predicting excess demand for health care services in the form of asthma daily admissions in London, using retrospective data from the Hospital Episode Statistics, weather and air quality. Trivariate quantile regression models (QRM) of asthma daily admissions were fitted to a 14-day range of lags of environmental factors, accounting for seasonality in a hold-in sample of the data. Representative lags were pooled to form multivariate predictive models, selected through a systematic backward stepwise reduction approach. Models were cross-validated using a hold-out sample of the data, and their respective root mean square error measures, sensitivity, specificity and predictive values compared. Two of the predictive models were able to detect extreme number of daily asthma admissions at sensitivity levels of 76 % and 62 %, as well as specificities of 66 % and 76 %. Their positive predictive values were slightly higher for the hold-out sample (29 % and 28 %) than for the hold-in model development sample (16 % and 18 %). QRMs can be used in multistage to select suitable variables to forecast extreme asthma events. The associations between asthma and environmental factors, including temperature, ozone and carbon monoxide can be exploited in predicting future events using QRMs.

Forecasting peak asthma admissions in London: an application of quantile regression models

NASA Astrophysics Data System (ADS)

Soyiri, Ireneous N.; Reidpath, Daniel D.; Sarran, Christophe

2013-07-01

Asthma is a chronic condition of great public health concern globally. The associated morbidity, mortality and healthcare utilisation place an enormous burden on healthcare infrastructure and services. This study demonstrates a multistage quantile regression approach to predicting excess demand for health care services in the form of asthma daily admissions in London, using retrospective data from the Hospital Episode Statistics, weather and air quality. Trivariate quantile regression models (QRM) of asthma daily admissions were fitted to a 14-day range of lags of environmental factors, accounting for seasonality in a hold-in sample of the data. Representative lags were pooled to form multivariate predictive models, selected through a systematic backward stepwise reduction approach. Models were cross-validated using a hold-out sample of the data, and their respective root mean square error measures, sensitivity, specificity and predictive values compared. Two of the predictive models were able to detect extreme number of daily asthma admissions at sensitivity levels of 76 % and 62 %, as well as specificities of 66 % and 76 %. Their positive predictive values were slightly higher for the hold-out sample (29 % and 28 %) than for the hold-in model development sample (16 % and 18 %). QRMs can be used in multistage to select suitable variables to forecast extreme asthma events. The associations between asthma and environmental factors, including temperature, ozone and carbon monoxide can be exploited in predicting future events using QRMs.

Vibration-based angular speed estimation for multi-stage wind turbine gearboxes

NASA Astrophysics Data System (ADS)

Peeters, Cédric; Leclère, Quentin; Antoni, Jérôme; Guillaume, Patrick; Helsen, Jan

2017-05-01

Most processing tools based on frequency analysis of vibration signals are only applicable for stationary speed regimes. Speed variation causes the spectral content to smear, which encumbers most conventional fault detection techniques. To solve the problem of non-stationary speed conditions, the instantaneous angular speed (IAS) is estimated. Wind turbine gearboxes however are typically multi-stage gearboxes, consisting of multiple shafts, rotating at different speeds. Fitting a sensor (e.g. a tachometer) to every single stage is not always feasible. As such there is a need to estimate the IAS of every single shaft based on the vibration signals measured by the accelerometers. This paper investigates the performance of the multi-order probabilistic approach for IAS estimation on experimental case studies of wind turbines. This method takes into account the meshing orders of the gears present in the system and has the advantage that a priori it is not necessary to associate harmonics with a certain periodic mechanical event, which increases the robustness of the method. It is found that the MOPA has the potential to easily outperform standard band-pass filtering techniques for speed estimation. More knowledge of the gearbox kinematics is beneficial for the MOPA performance, but even with very little knowledge about the meshing orders, the MOPA still performs sufficiently well to compete with the standard speed estimation techniques. This observation is proven on two different data sets, both originating from vibration measurements on the gearbox housing of a wind turbine.

Purposeful sampling for qualitative data collection and analysis in mixed method implementation research

PubMed Central

Palinkas, Lawrence A.; Horwitz, Sarah M.; Green, Carla A.; Wisdom, Jennifer P.; Duan, Naihua; Hoagwood, Kimberly

2013-01-01

Purposeful sampling is widely used in qualitative research for the identification and selection of information-rich cases related to the phenomenon of interest. Although there are several different purposeful sampling strategies, criterion sampling appears to be used most commonly in implementation research. However, combining sampling strategies may be more appropriate to the aims of implementation research and more consistent with recent developments in quantitative methods. This paper reviews the principles and practice of purposeful sampling in implementation research, summarizes types and categories of purposeful sampling strategies and provides a set of recommendations for use of single strategy or multistage strategy designs, particularly for state implementation research. PMID:24193818

A Correction to the Stress-Strain Curve During Multistage Hot Deformation of 7150 Aluminum Alloy Using Instantaneous Friction Factors

NASA Astrophysics Data System (ADS)

Jiang, Fulin; Tang, Jie; Fu, Dinfa; Huang, Jianping; Zhang, Hui

2018-04-01

Multistage stress-strain curve correction based on an instantaneous friction factor was studied for axisymmetric uniaxial hot compression of 7150 aluminum alloy. Experimental friction factors were calculated based on continuous isothermal axisymmetric uniaxial compression tests at various deformation parameters. Then, an instantaneous friction factor equation was fitted by mathematic analysis. After verification by comparing single-pass flow stress correction with traditional average friction factor correction, the instantaneous friction factor equation was applied to correct multistage stress-strain curves. The corrected results were reasonable and validated by multistage relative softening calculations. This research provides a broad potential for implementing axisymmetric uniaxial compression in multistage physical simulations and friction optimization in finite element analysis.

The Sampling Design of the China Family Panel Studies (CFPS)

PubMed Central

Xie, Yu; Lu, Ping

2018-01-01

The China Family Panel Studies (CFPS) is an on-going, nearly nationwide, comprehensive, longitudinal social survey that is intended to serve research needs on a large variety of social phenomena in contemporary China. In this paper, we describe the sampling design of the CFPS sample for its 2010 baseline survey and methods for constructing weights to adjust for sampling design and survey nonresponses. Specifically, the CFPS used a multi-stage probability strategy to reduce operation costs and implicit stratification to increase efficiency. Respondents were oversampled in five provinces or administrative equivalents for regional comparisons. We provide operation details for both sampling and weights construction. PMID:29854418

40 CFR 600.316-78 - Multistage manufacture.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Multistage manufacture. 600.316-78 Section 600.316-78 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY... and Later Model Year Automobiles-Labeling § 600.316-78 Multistage manufacture. Where more than one...

Volume 2: Explicit, multistage upwind schemes for Euler and Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Elmiligui, Alaa; Ash, Robert L.

1992-01-01

The objective of this study was to develop a high-resolution-explicit-multi-block numerical algorithm, suitable for efficient computation of the three-dimensional, time-dependent Euler and Navier-Stokes equations. The resulting algorithm has employed a finite volume approach, using monotonic upstream schemes for conservation laws (MUSCL)-type differencing to obtain state variables at cell interface. Variable interpolations were written in the k-scheme formulation. Inviscid fluxes were calculated via Roe's flux-difference splitting, and van Leer's flux-vector splitting techniques, which are considered state of the art. The viscous terms were discretized using a second-order, central-difference operator. Two classes of explicit time integration has been investigated for solving the compressible inviscid/viscous flow problems--two-state predictor-corrector schemes, and multistage time-stepping schemes. The coefficients of the multistage time-stepping schemes have been modified successfully to achieve better performance with upwind differencing. A technique was developed to optimize the coefficients for good high-frequency damping at relatively high CFL numbers. Local time-stepping, implicit residual smoothing, and multigrid procedure were added to the explicit time stepping scheme to accelerate convergence to steady-state. The developed algorithm was implemented successfully in a multi-block code, which provides complete topological and geometric flexibility. The only requirement is C degree continuity of the grid across the block interface. The algorithm has been validated on a diverse set of three-dimensional test cases of increasing complexity. The cases studied were: (1) supersonic corner flow; (2) supersonic plume flow; (3) laminar and turbulent flow over a flat plate; (4) transonic flow over an ONERA M6 wing; and (5) unsteady flow of a compressible jet impinging on a ground plane (with and without cross flow). The emphasis of the test cases was validation of code, and assessment of performance, as well as demonstration of flexibility.

Exposure Control Using Adaptive Multi-Stage Item Bundles.

ERIC Educational Resources Information Center

Luecht, Richard M.

This paper presents a multistage adaptive testing test development paradigm that promises to handle content balancing and other test development needs, psychometric reliability concerns, and item exposure. The bundled multistage adaptive testing (BMAT) framework is a modification of the computer-adaptive sequential testing framework introduced by…

Tracking fluorescent dissolved organic matter in multistage rivers using EEM-PARAFAC analysis: implications of the secondary tributary remediation for watershed management.

PubMed

Nie, Zeyu; Wu, Xiaodong; Huang, Haomin; Fang, Xiaomin; Xu, Chen; Wu, Jianyu; Liang, Xinqiang; Shi, Jiyan

2016-05-01

Profound understanding of behaviors of organic matter from sources to multistage rivers assists watershed management for improving water quality of river networks in rural areas. Ninety-one water samples were collected from the three orders of receiving rivers in a typical combined polluted subcatchment (diffuse agricultural pollutants and domestic sewage) located in China. Then, the fluorescent dissolved organic matter (FDOM) information for these samples was determined by the excitation-emission matrix coupled with parallel factor analysis (EEM-PARAFAC). Consequently, two typical humic-like (C1 and C2) and other two protein-like (C3 and C4) components were separated. Their fluorescence peaks were located at λ ex/em = 255(360)/455, <250(320)/395, 275/335, and <250/305 nm, which resembled the traditional peaks of A + C, A + M, T, and B, respectively. In addition, C1 and C2 accounted for the dominant contributions to FDOM (>60 %). Principal component analysis (PCA) further demonstrated that, except for the autochthonous produced C4, the allochthonous components (C1 and C2) had the same terrestrial origins, but C3 might possess the separate anthropogenic and biological sources. Moreover, the spatial heterogeneity of contamination levels was noticeable in multistage rivers, and the allochthonous FDOM was gradually homogenized along the migration directions. Interestingly, the average content of the first three PARAFAC components in secondary tributaries and source pollutants had significantly higher levels than that in subsequent receiving rivers, thus suggesting that the supervision and remediation for secondary tributaries would play a prominent role in watershed management works.

Family Functioning, Identity Formation, and the Ability of Conflict Resolution among Adolescents

ERIC Educational Resources Information Center

Kiani, Behnaz; Hojatkhah, Seyed Mohsen; Torabi-Nami, Mohammad

2016-01-01

Family is perhaps the most influential system in individuals' life in which various behaviors are learnt. Family functioning refers to the ability of family to meet its responsibilities. The present correlation study used a multi-stage cluster sampling method to recruit 686 subjects including 338 males and 348 females from all high school students…

Young People's Expressed Needs for Comprehensive Sexuality Education in Ecuadorian Schools

ERIC Educational Resources Information Center

Castillo Nuñez, Jessica; Derluyn, Ilse; Valcke, Martin

2018-01-01

This study analyses the expressed sexuality education needs of young people from Azuay, a region of Ecuador characterised by a large proportion of young people whose parents have migrated abroad, a group often considered at risk to developing of sexual health problems. Multi-stage stratified cluster sampling was used to recruit young people aged…

Texas School Survey of Substance Abuse: Grades 7-12. 1992.

ERIC Educational Resources Information Center

Liu, Liang Y.; Fredlund, Eric V.

The 1992 Texas School Survey results for secondary students are based on data collected from a sample of 73,073 students in grades 7 through 12. Students were randomly selected from school districts throughout the state using a multi-stage probability design. The procedure ensured that students living in metropolitan and rural areas of Texas are…

Socioeconomic Situations of the Elderly within the Context of Millennium Development Goals (MDGs) in Nigeria

ERIC Educational Resources Information Center

Wahab, Elias Olukorede

2011-01-01

It is still unknown how the MDGs have impacted the socioeconomic situations of the elderly in Nigeria. This has become essential to appraise the attainability of the MDGs in Nigeria. Quantitative data were collected through an individual-based questionnaire. Multistage sampling was employed to select local government areas, enumeration areas, and…

Teacher Use of Data to Guide Instructional Practice in Elementary Schools

ERIC Educational Resources Information Center

Burrows, Debra C.

2011-01-01

This descriptive study focused on the degree to which data-driven decision making as envisioned by the NCLB legislation was actually occurring in the elementary schools studied. A multi-stage random sample of six Pennsylvania school districts out of 19 located within the service area of Pennsylvania Intermediate Unit #17, one of 29 regional…

A Population-Based Study of Job Stress in Mexican Americans, Non-Hispanic Blacks, and Non-Hispanic Whites

ERIC Educational Resources Information Center

Perez, Norma; Franzini, Luisa; Freeman, Daniel H.; Ju, Hyunsu; Peek, Kristen

2011-01-01

There is little known about the association between socioeconomic status and job stress in Mexican Americans. To address this issue, data were originated on a community level using personal interviews from working Mexican Americans using a multistage probability sample. In this study we described the population's sociodemographic characteristics,…

Multistage remote sensing: toward an annual national inventory

Treesearch

Raymond L. Czaplewski

1999-01-01

Remote sensing can improve efficiency of statistical information. Landsat data can identify and map a few broad categories of forest cover and land use. However, more-detailed information requires a sample of higher-resolution imagery, which costs less than field data but considerably more than Landsat data. A national remote sensing program would be a major...

A Chondrule from the Mokoia (CV3) Chondrite with Anomalously Low 26Mg*: Evidence for a Multi-Stage History-

NASA Astrophysics Data System (ADS)

Claydon, J. L.; Elliott, T.; Coath, C. D.; Chen, H. W.; Taylor, C. A.; Russell, S. S.

2015-07-01

MC-ICP-MS measurements of Mg isotopes in chondrule MOK13B reveal that it may have formed from low-Al/Mg material that underwent chemical fractionation to increase Al/Mg after decay of 26-Al, or it may sample a region with anomalous Al or Mg isotopes.

How to Classify the Diversity of Seventh Grade Students' Mathematical Process Skills: An Application of Latent Profile Analysis

ERIC Educational Resources Information Center

Kaosa-ard, Chanapat; Erawan, Waraporn; Damrongpanit, Suntonrapot; Suksawang, Poonpong

2015-01-01

The researcher applied latent profile analysis to study the difference of the students' mathematical process skill. These skills are problem solving skills, reasoning skills, communication and presentation skills, connection knowledge skills, and creativity skills. Samples were 2,485 seventh-grade students obtained from Multi-stage Random…

Do Human-Figure Drawings of Children and Adolescents Mirror Their Cognitive Style and Self-Esteem?

ERIC Educational Resources Information Center

Dey, Anindita; Ghosh, Paromita

2016-01-01

The investigation probed relationships among human-figure drawing, field-dependent-independent cognitive style and self-esteem of 10-15 year olds. It also attempted to predict human-figure drawing scores of participants based on their field-dependence-independence and self-esteem. Area, stratified and multi-stage random sampling were used to…

Age of Alcohol-Dependence Onset: Associations with Severity of Dependence and Seeking Treatment

ERIC Educational Resources Information Center

Hingson, Ralph W.; Heeren, Timothy; Winter, Michael R.

2007-01-01

Objective: We explored whether people who become alcohol dependent at younger ages are more likely to seek alcohol-related help or treatment or experience chronic relapsing dependence. Methods: In 2001-2002 the National Institute on Alcohol Abuse and Alcoholism completed a face-to-face interview survey with a multistage probability sample of 43…

What Puts Women at Risk of Violence from Their Husbands? Findings from a Large, Nationally Representative Survey in Turkey

ERIC Educational Resources Information Center

Yuksel-Kaptanoglu, Ilknur; Turkyilmaz, Ahmet Sinan; Heise, Lori

2012-01-01

A large, nationally representative, cross-sectional survey was conducted in Turkey in 2008. In this survey, which used the WHO (World Health Organization) study module on violence, information about lifetime and current violence (past 12 months) was obtained using weighted, stratified, and multistage cluster sampling. This article describes…

An assessment of Lot Quality Assurance Sampling to evaluate malaria outcome indicators: extending malaria indicator surveys.

PubMed

Biedron, Caitlin; Pagano, Marcello; Hedt, Bethany L; Kilian, Albert; Ratcliffe, Amy; Mabunda, Samuel; Valadez, Joseph J

2010-02-01

Large investments and increased global prioritization of malaria prevention and treatment have resulted in greater emphasis on programme monitoring and evaluation (M&E) in many countries. Many countries currently use large multistage cluster sample surveys to monitor malaria outcome indicators on a regional and national level. However, these surveys often mask local-level variability important to programme management. Lot Quality Assurance Sampling (LQAS) has played a valuable role for local-level programme M&E. If incorporated into these larger surveys, it would provide a comprehensive M&E plan at little, if any, extra cost. The Mozambique Ministry of Health conducted a Malaria Indicator Survey (MIS) in June and July 2007. We applied LQAS classification rules to the 345 sampled enumeration areas to demonstrate identifying high- and low-performing areas with respect to two malaria program indicators-'household possession of any bednet' and 'household possession of any insecticide-treated bednet (ITN)'. As shown by the MIS, no province in Mozambique achieved the 70% coverage target for household possession of bednets or ITNs. By applying LQAS classification rules to the data, we identify 266 of the 345 enumeration areas as having bednet coverage severely below the 70% target. An additional 73 were identified with low ITN coverage. This article demonstrates the feasibility of integrating LQAS into multistage cluster sampling surveys and using these results to support a comprehensive national, regional and local programme M&E system. Furthermore, in the recommendations we outlined how to integrate the Large Country-LQAS design into macro-surveys while still obtaining results available through current sampling practices.

Identifying children with Special Health Care Needs in Alexandria, Egypt.

PubMed

Wahdan, Iman H; El-Nimr, Nessrin A

2018-05-23

In developing countries, obtaining reliable prevalence rates for children with special health care needs (CSHCN) is challenging. One of the tools used to identify CSHCN is the CSHCN Screener (not available in Arabic). The aim is to test the feasibility of using an Arabic version of CSHCN screener in identifying CSHCN in the Egyptian setup and to estimate their prevalence in Alexandria. A community-based survey was conducted among a representative sample of children using a multistage cluster sampling technique. A pre-designed interviewing questionnaire and the Arabic translation of CSHCN screener were used. The prevalence of CSHCN was 12.2% and 91.8% of them had the three domains of health care needs. The most prevalent conditions requiring special health care were sensory and cognitive impairments and impaired mobility. Type of family was the only significant factor associated with special health care needs. It is concluded that the screener can easily be used and help in identifying the majority of children that need to be the focus of the National health care services. It is recommended that the school health services add the screener to assist depicting the existing gaps in the health care system.

Exposure to media content and sexual health behaviour among adolescents in Lagos metropolis, Nigeria.

PubMed

Wusu, Onipede

2013-06-01

The influence of adolescents' exposure to sexual health content of mass media in their sexual health behaviour in Nigeria is still not clear. Data were gathered through a survey conducted among adolescents aged 12-19 years in Lagos metropolis between November 2009 and February 2010. A multistage sampling strategy was adopted in selecting respondents. Logistic regression technique was utilised in the analysis. The results indicate that the respondents were most frequently exposed to TV (male = 92.2; female = 94.9) and radio (male = 88.2; female = 91.7) media. The odds ratios indicate that sexual health content of mass media significantly predicted condom use, multiple sexual relationship, sexual intercourse and self reported occurrence of abortion in the study sample. The findings imply that positive media sexual health content is likely to promote sexual health among adolescents but negative contents can put adolescents' sexual health in danger. In addition, safe sex can be advanced among adolescents if the media provide accurate information on sexuality, emphasising the dangers of risky sexual practices. Finally, this study posits that accurate portrayal of sexuality in the media would contribute immensely to improving public health in the metropolis.

Factors Affecting Jordanian School Adolescents' Experience of Being Bullied.

PubMed

Shaheen, Abeer M; Hammad, Sawsan; Haourani, Eman M; Nassar, Omayyah S

The purpose of this study was to identify the Jordanian school adolescents' experience of being bullied, and to examine its association with selected socio-demographic variables. This cross sectional descriptive study used multi-stages cluster sampling technique to recruit a sample of in-school adolescents in Jordan (N=436). The Personal Experiences Checklist was used to measure the experience of bullying. Descriptive statistics and parametric tests were used in the analysis. Relational-verbal bullying was the most common form of bullying while cyber bullying was the least common type. Male adolescents experienced bullying more than females. In addition, adolescents belonging to low-income families experienced bullying more than those from moderate-income families. Finally, being bullied was negatively correlated with academic performance of students. This study indicated that risk factors for bullying are multifaceted which necessitate the development of prevention and intervention strategies to combat bullying taking into consideration these factors. Schools should introduce environmental changes to discourage bullying and establish a policy with specific guidelines of what constitutes bullying behavior and expected disciplinary procedures. Staff training on information about the definition of bullying, current trends, and the effects of bullying is also recommended. Copyright © 2017 Elsevier Inc. All rights reserved.

A Testlet Assembly Design for Adaptive Multistage Tests

ERIC Educational Resources Information Center

Luecht, Richard; Brumfield, Terry; Breithaupt, Krista

2006-01-01

This article describes multistage tests and some practical test development considerations related to the design and implementation of a multistage test, using the Uniform CPA (certified public accountant) Examination as a case study. The article further discusses the use of automated test assembly procedures in an operational context to produce…

Longitudinal Multistage Testing

ERIC Educational Resources Information Center

Pohl, Steffi

2013-01-01

This article introduces longitudinal multistage testing (lMST), a special form of multistage testing (MST), as a method for adaptive testing in longitudinal large-scale studies. In lMST designs, test forms of different difficulty levels are used, whereas the values on a pretest determine the routing to these test forms. Since lMST allows for…

Monte Carlo uncertainty analysis of dose estimates in radiochromic film dosimetry with single-channel and multichannel algorithms.

PubMed

Vera-Sánchez, Juan Antonio; Ruiz-Morales, Carmen; González-López, Antonio

2018-03-01

To provide a multi-stage model to calculate uncertainty in radiochromic film dosimetry with Monte-Carlo techniques. This new approach is applied to single-channel and multichannel algorithms. Two lots of Gafchromic EBT3 are exposed in two different Varian linacs. They are read with an EPSON V800 flatbed scanner. The Monte-Carlo techniques in uncertainty analysis provide a numerical representation of the probability density functions of the output magnitudes. From this numerical representation, traditional parameters of uncertainty analysis as the standard deviations and bias are calculated. Moreover, these numerical representations are used to investigate the shape of the probability density functions of the output magnitudes. Also, another calibration film is read in four EPSON scanners (two V800 and two 10000XL) and the uncertainty analysis is carried out with the four images. The dose estimates of single-channel and multichannel algorithms show a Gaussian behavior and low bias. The multichannel algorithms lead to less uncertainty in the final dose estimates when the EPSON V800 is employed as reading device. In the case of the EPSON 10000XL, the single-channel algorithms provide less uncertainty in the dose estimates for doses higher than four Gy. A multi-stage model has been presented. With the aid of this model and the use of the Monte-Carlo techniques, the uncertainty of dose estimates for single-channel and multichannel algorithms are estimated. The application of the model together with Monte-Carlo techniques leads to a complete characterization of the uncertainties in radiochromic film dosimetry. Copyright © 2018 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Automatic variance analysis of multistage care pathways.

PubMed

Li, Xiang; Liu, Haifeng; Zhang, Shilei; Mei, Jing; Xie, Guotong; Yu, Yiqin; Li, Jing; Lakshmanan, Geetika T

2014-01-01

A care pathway (CP) is a standardized process that consists of multiple care stages, clinical activities and their relations, aimed at ensuring and enhancing the quality of care. However, actual care may deviate from the planned CP, and analysis of these deviations can help clinicians refine the CP and reduce medical errors. In this paper, we propose a CP variance analysis method to automatically identify the deviations between actual patient traces in electronic medical records (EMR) and a multistage CP. As the care stage information is usually unavailable in EMR, we first align every trace with the CP using a hidden Markov model. From the aligned traces, we report three types of deviations for every care stage: additional activities, absent activities and violated constraints, which are identified by using the techniques of temporal logic and binomial tests. The method has been applied to a CP for the management of congestive heart failure and real world EMR, providing meaningful evidence for the further improvement of care quality.

Automotive System for Remote Surface Classification.

PubMed

Bystrov, Aleksandr; Hoare, Edward; Tran, Thuy-Yung; Clarke, Nigel; Gashinova, Marina; Cherniakov, Mikhail

2017-04-01

In this paper we shall discuss a novel approach to road surface recognition, based on the analysis of backscattered microwave and ultrasonic signals. The novelty of our method is sonar and polarimetric radar data fusion, extraction of features for separate swathes of illuminated surface (segmentation), and using of multi-stage artificial neural network for surface classification. The developed system consists of 24 GHz radar and 40 kHz ultrasonic sensor. The features are extracted from backscattered signals and then the procedures of principal component analysis and supervised classification are applied to feature data. The special attention is paid to multi-stage artificial neural network which allows an overall increase in classification accuracy. The proposed technique was tested for recognition of a large number of real surfaces in different weather conditions with the average accuracy of correct classification of 95%. The obtained results thereby demonstrate that the use of proposed system architecture and statistical methods allow for reliable discrimination of various road surfaces in real conditions.

Automotive System for Remote Surface Classification

PubMed Central

Bystrov, Aleksandr; Hoare, Edward; Tran, Thuy-Yung; Clarke, Nigel; Gashinova, Marina; Cherniakov, Mikhail

2017-01-01

In this paper we shall discuss a novel approach to road surface recognition, based on the analysis of backscattered microwave and ultrasonic signals. The novelty of our method is sonar and polarimetric radar data fusion, extraction of features for separate swathes of illuminated surface (segmentation), and using of multi-stage artificial neural network for surface classification. The developed system consists of 24 GHz radar and 40 kHz ultrasonic sensor. The features are extracted from backscattered signals and then the procedures of principal component analysis and supervised classification are applied to feature data. The special attention is paid to multi-stage artificial neural network which allows an overall increase in classification accuracy. The proposed technique was tested for recognition of a large number of real surfaces in different weather conditions with the average accuracy of correct classification of 95%. The obtained results thereby demonstrate that the use of proposed system architecture and statistical methods allow for reliable discrimination of various road surfaces in real conditions. PMID:28368297

Public-private sector partnership in household waste management as perceived by residents in south-west Nigeria.

PubMed

Ezebilo, Eugene E; Animasaun, Emmanuel D

2012-08-01

In most developing countries public-private sector partnership is becoming increasingly applied in household waste management service delivery especially in urban areas to reduce cost and improve effectiveness. This paper reports a study of householders' perceptions of public-private sector partnership in provision of household waste management services in Ilorin, south-west Nigeria. A multistage random sampling technique was used to select 224 households for the study. The data generated from the survey were analysed using a binary logit model. The results show that most of the respondents were of the opinion that the public-private partnership has not been able to improve household waste management services. Time taken to visit solid waste collection point, income and marital status negatively influenced their perceptions, while activities of sanitary inspectors, occupation and gender had positive influence. The public-private partnership will be more effective and sustainable if the public sector could pay more attention to performance monitoring and accountability.

Study on the availability of physical infrastructure and manpower facilities in sub-centers of Chittoor district of Andhra Pradesh.

PubMed

Reddy, N Bayapa; Prabhu, G Ravi; Sai, T S R

2012-01-01

The sub-centers (SCs) are under constant criticism for their inability to deliver quality services due to the nonavailability of adequate infrastructure, manpower and supply of drugs.A cross-sectional study was conducted in Chittoor District of Andhra Pradesh to assess the availability of physical infrastructure and manpower in the SCs. A total of 34 SCs were selected by multistage and stratified random sampling technique. The data was statistically analyzed by using Microsoft Excel. The deficiency in the availability of health workers male and female were found to be 67.7% and 27.5%, respectively. The residential facility for health workers was available only in 26.4% SCs. Only 20.6% of SCs had stethoscope and B.P apparatus. The physical infrastructure and manpower availability at the SCs needs considerable improvement as per the Indian Public Health Standard (IPHS). Facilities to conduct the normal delivery and 24-hours emergency referral services need to be addressed at the earliest.

Remote sensing applied to forest resources

NASA Technical Reports Server (NTRS)

Hernandezfilho, P. (Principal Investigator)

1984-01-01

The development of methodologies to classify reforested areas using remotely sensed data is discussed. A preliminary study was carried out in northeast of the Sao Paulo State in 1978. The reforested areas of Pinus spp and Eucalyptus spp were based on the spectral, spatial and temporal characteristics fo LANDSAT imagery. Afterwards, a more detailed study was carried out in the Mato Grosso do Sul State. The reforested areas were mapped in functions of the age (from: 0 to 1 year, 1 to 2 years, 2 to 3 years, 3 to 4 years, 4 to 5 years and 5 to 6 years) and of the heterogeneity stand (from: 0 to 20%, 20 to 40%, 40 to 60%, 60 to 80% and 80 to 100%). The relative differences between the artificial forest areas, estimated from LANDSAT data and ground information, varied from -8.72 to +9.49%. The estimation of forest volume through a multistage sampling technique, with probability proportional to size, is also discussed.

Modeling Complex Dynamic Interactions of Nonlinear, Aeroelastic, Multistage, and Localization Phenomena in Turbine Engines

DTIC Science & Technology

2011-02-25

fast method of predicting the number of iterations needed for converged results. A new hybrid technique is proposed to predict the convergence history...interchanging between the modes, whereas a smaller veering (or crossing) region shows fast mode switching. Then, the nonlinear vibration re- sponse of the...problems of interest involve dynamic ( fast ) crack propagation, then the nodes selected by the proposed approach at some time instant might not

A Multi-Stage Optimization Model for Air Force Reserve Officer Training Corps Officer Candidate Selection

DTIC Science & Technology

2012-03-01

HSSP), the In-College Schol - arship Program (ICSP), and the Enlisted Commissioning Program (ECP) [1]. The 5 entire scholarship program is managed by...and for which they are interested in volunteering. AFROTC is currently interested in developing techniques to better allocate schol - arships and...institutions are also concerned with ensuring that they enroll the most qualified students into their programs. Camarena-Anthony [8] examines schol - arship

Multistage Planetary Power Transmissions

NASA Technical Reports Server (NTRS)

Hadden, G. B.; Dyba, G. J.; Ragen, M. A.; Kleckner, R. J.; Sheynin, L.

1986-01-01

PLANETSYS simulates thermomechanical performance of multistage planetary performance of multistage planetary power transmission. Two versions of code developed, SKF version and NASA version. Major function of program: compute performance characteristics of planet bearing for any of six kinematic inversions. PLANETSYS solves heat-balance equations for either steadystate or transient thermal conditions, and produces temperature maps for mechanical system.

Modeling of Unsteady Three-dimensional Flows in Multistage Machines

NASA Technical Reports Server (NTRS)

Hall, Kenneth C.; Pratt, Edmund T., Jr.; Kurkov, Anatole (Technical Monitor)

2003-01-01

Despite many years of development, the accurate and reliable prediction of unsteady aerodynamic forces acting on turbomachinery blades remains less than satisfactory, especially when viewed next to the great success investigators have had in predicting steady flows. Hall and Silkowski (1997) have proposed that one of the main reasons for the discrepancy between theory and experiment and/or industrial experience is that many of the current unsteady aerodynamic theories model a single blade row in an infinitely long duct, ignoring potentially important multistage effects. However, unsteady flows are made up of acoustic, vortical, and entropic waves. These waves provide a mechanism for the rotors and stators of multistage machines to communicate with one another. In other words, wave behavior makes unsteady flows fundamentally a multistage (and three-dimensional) phenomenon. In this research program, we have has as goals (1) the development of computationally efficient computer models of the unsteady aerodynamic response of blade rows embedded in a multistage machine (these models will ultimately be capable of analyzing three-dimensional viscous transonic flows), and (2) the use of these computer codes to study a number of important multistage phenomena.

Multistage variable probability forest volume inventory. [Defiance Unit of the Navajo Nation in Arizona and Colorado

NASA Technical Reports Server (NTRS)

Anderson, J. E. (Principal Investigator)

1979-01-01

The net board foot volume (Scribner log rule) of the standing Ponderosa pine timber on the Defiance Unit of the Navajo Nation's forested land was estimated using a multistage forest volume inventory scheme with variable sample selection probabilities. The inventory designed to accomplish this task required that both LANDSAT MSS digital data and aircraft acquired data be used to locate one acre ground splits, which were subsequently visited by ground teams conducting detailed tree measurements using an optical dendrometer. The dendrometer measurements were then punched on computer input cards and were entered in a computer program developed by the U.S. Forest Service. The resulting individual tree volume estimates were then expanded through the use of a statistically defined equation to produce the volume estimate for the entire area which includes 192,026 acres and is approximately a 44% the total forested area of the Navajo Nation.

Low-Dead-Volume Inlet for Vacuum Chamber

NASA Technical Reports Server (NTRS)

Naylor, Guy; Arkin, C.

2010-01-01

Gas introduction from near-ambient pressures to high vacuum traditionally is accomplished either by multi-stage differential pumping that allows for very rapid response, or by a capillary method that allows for a simple, single-stage introduction, but which often has a delayed response. Another means to introduce the gas sample is to use the multi-stage design with only a single stage. This is accomplished by using a very small conductance limit. The problem with this method is that a small conductance limit will amplify issues associated with dead -volume. As a result, a high -vacuum gas inlet was developed with low dead -volume, allowing the use of a very low conductance limit interface. Gas flows through the ConFlat flange at a relatively high flow rate at orders of magnitude greater than through the conductance limit. The small flow goes through a conductance limit that is a double-sided ConFlat.

Low-Dead-Volume Inlet for Vacuum Chamber

NASA Technical Reports Server (NTRS)

Naylor, Guy; Arkin, C.

2011-01-01

Gas introduction from near-ambient pressures to high vacuum traditionally is accomplished either by multi-stage differential pumping that allows for very rapid response, or by a capillary method that allows for a simple, single-stage introduction, but which often has a delayed response. Another means to introduce the gas sample is to use the multi-stage design with only a single stage. This is accomplished by using a very small conductance limit. The problem with this method is that a small conductance limit will amplify issues associated with dead-volume. As a result, a high-vacuum gas inlet was developed with low dead-volume, allowing the use of a very low conductance limit interface. Gas flows through the ConFlat flange at a relatively high flow rate at orders of magnitude greater than through the conductance limit. The small flow goes through a conductance limit that is a double-sided ConFlat.

Supergene neoformation of Pt-Ir-Fe-Ni alloys: multistage grains explain nugget formation in Ni-laterites

NASA Astrophysics Data System (ADS)

Aiglsperger, Thomas; Proenza, Joaquín A.; Font-Bardia, Mercè; Baurier-Aymat, Sandra; Galí, Salvador; Lewis, John F.; Longo, Francisco

2017-10-01

Ni-laterites from the Dominican Republic host rare but extremely platinum-group element (PGE)-rich chromitites (up to 17.5 ppm) without economic significance. These chromitites occur either included in saprolite (beneath the Mg discontinuity) or as `floating chromitites' within limonite (above the Mg discontinuity). Both chromitite types have similar iridium-group PGE (IPGE)-enriched chondrite normalized patterns; however, chromitites included in limonite show a pronounced positive Pt anomaly. Investigation of heavy mineral concentrates, obtained via hydroseparation techniques, led to the discovery of multistage PGE grains: (i) Os-Ru-Fe-(Ir) grains of porous appearance are overgrown by (ii) Ni-Fe-Ir and Ir-Fe-Ni-(Pt) phases which are overgrown by (iii) Pt-Ir-Fe-Ni mineral phases. Whereas Ir-dominated overgrowths prevail in chromitites from the saprolite, Pt-dominated overgrowths are observed within floating chromitites. The following formation model for multistage PGE grains is discussed: (i) hypogene platinum-group minerals (PGM) (e.g. laurite) are transformed to secondary PGM by desulphurization during serpentinization; (ii) at the stages of serpentinization and/or at the early stages of lateritization, Ir is mobilized and recrystallizes on porous surfaces of secondary PGM (serving as a natural catalyst) and (iii) at the late stages of lateritization, biogenic mediated neoformation (and accumulation) of Pt-Ir-Fe-Ni nanoparticles occurs. The evidence presented in this work demonstrates that in situ growth of Pt-Ir-Fe-Ni alloy nuggets of isometric symmetry is possible within Ni-laterites from the Dominican Republic.

Multi-stage internal gear/turbine fuel pump

DOEpatents

Maier, Eugen; Raney, Michael Raymond

2004-07-06

A multi-stage internal gear/turbine fuel pump for a vehicle includes a housing having an inlet and an outlet and a motor disposed in the housing. The multi-stage internal gear/turbine fuel pump also includes a shaft extending axially and disposed in the housing. The multi-stage internal gear/turbine fuel pump further includes a plurality of pumping modules disposed axially along the shaft. One of the pumping modules is a turbine pumping module and another of the pumping modules is a gerotor pumping module for rotation by the motor to pump fuel from the inlet to the outlet.

Design, construction and evaluation of a 12.2 GHz, 4.0 kW-CW coupled-cavity traveling wave tube

NASA Technical Reports Server (NTRS)

Ayers, W. R.; Harman, W. A.

1973-01-01

An analytical and experimental program to study design techniques and to utilize these techniques to optimize the performance of an X-band 4 kW, CW traveling wave tube ultimately intended for satellite-borne television broadcast transmitters is described. The design is based on the coupled-cavity slow-wave circuit with velocity resynchronization to maximize the conversion efficiency. The design incorporates a collector which is demountable from the tube. This was done to facilitate multistage depressed collector experiments employing a NASA designed axisymmetric, electrostatic collector for linear beam microwave tubes after shipment of the tubes to NASA.

The Effect of Instructional Analogies in Interaction with Logical Thinking Ability on Achievement and Attitude toward Chemistry

ERIC Educational Resources Information Center

Eskandar, Fathi-Azar; Bayrami, Mansor; Vahedi, Shahram; Ansar, Vahideh Abdollahi Adli

2013-01-01

We investigated the effect of instructional analogies in interaction with logical thinking ability on achievement and attitude towards chemistry. The participants were 147 female students from 6 8th grade classes in three public junior high schools selected by using a random multistage sampling method from five education districts in Tabriz, a…

Self-Reported Health among Older Bangladeshis: How Good a Health Indicator Is It?

ERIC Educational Resources Information Center

Rahman, M. Omar; Barsky, Arthur J.

2003-01-01

Purpose: This study examines the value of self-reported health (SRH) as an indicator of underlying health status in a developing country setting. Design and Methods: Logistic regression methods with adjustments for multistage sampling are used to examine the factors associated with SRH in 2,921 men and women aged 50 and older in rural Bangladesh.…

Gender Differences in Mathematics Achievement and Retention Scores: A Case of Problem-Based Learning Method

ERIC Educational Resources Information Center

Ajai, John T.; Imoko, Benjamin I.

2015-01-01

This study was undertaken to assess gender differences in mathematics achievement and retention by using Problem-Based Learning (PBL). The design of the study was pre-posttest quasi-experimental. Four hundred and twenty eight senior secondary one (SS I) students using multistage sampling from ten grant-aided and government schools were involved in…

The Hispanic Americans Baseline Alcohol Survey (HABLAS): Acculturation, Birthplace and Alcohol-Related Social Problems across Hispanic National Groups

ERIC Educational Resources Information Center

Caetano, Raul; Vaeth, Patrice A. C.; Rodriguez, Lori A.

2012-01-01

The purpose of this study was to examine the association between acculturation, birthplace, and alcohol-related social problems across Hispanic national groups. A total of 5,224 Hispanic adults (18+ years) were interviewed using a multistage cluster sample design in Miami, New York, Philadelphia, Houston, and Los Angeles. Multivariate analysis…

Farmers' Participation in Extension Programs and Technology Adoption in Rural Nepal: A Logistic Regression Analysis

ERIC Educational Resources Information Center

Suvedi, Murari; Ghimire, Raju; Kaplowitz, Michael

2017-01-01

Purpose: This paper examines the factors affecting farmers' participation in extension programs and adoption of improved seed varieties in the hills of rural Nepal. Methodology/approach: Cross-sectional farm-level data were collected during July and August 2014. A sample of 198 farm households was selected for interviewing by using a multistage,…

Testing a Multi-Stage Screening System: Predicting Performance on Australia's National Achievement Test Using Teachers' Ratings of Academic and Social Behaviors

ERIC Educational Resources Information Center

Kettler, Ryan J.; Elliott, Stephen N.; Davies, Michael; Griffin, Patrick

2012-01-01

This study addresses the predictive validity of results from a screening system of academic enablers, with a sample of Australian elementary school students, when the criterion variable is end-of-year achievement. The investigation included (a) comparing the predictive validity of a brief criterion-referenced nomination system with more…

Analysis of the chemical composition of ultrafine particles from two domestic solid biomass fired room heaters under simulated real-world use

NASA Astrophysics Data System (ADS)

Ozgen, Senem; Becagli, Silvia; Bernardoni, Vera; Caserini, Stefano; Caruso, Donatella; Corbella, Lorenza; Dell'Acqua, Manuela; Fermo, Paola; Gonzalez, Raquel; Lonati, Giovanni; Signorini, Stefano; Tardivo, Ruggero; Tosi, Elisa; Valli, Gianluigi; Vecchi, Roberta; Marinovich, Marina

2017-02-01

Two common types of wood (beech and fir) were burned in commercial pellet (11.1 kW) and wood (8.2 kW) stoves following a combustion cycle simulating the behavior of a real-world user. Ultrafine particulate matter (UFP, dp < 100 nm) was sampled with three parallel multistage impactors and analyzed for metals, main water soluble ions, anhydrosugars, total carbon, and PAH content. The measurement of the number concentration and size distribution was also performed by a fourth multistage impactor. UFP mass emission factors averaged to 424 mg/kgfuel for all the tested stove and wood type (fir, beech) combinations except for beech log burning in the wood stove (838 mg/kgfuel). Compositional differences were observed for pellets and wood UFP samples, where high TC levels characterize the wood log combustion and potassium salts are dominant in every pellet sample. Crucial aspects determining the UFP composition in the wood stove experiments are critical situations in terms of available oxygen (a lack or an excess of combustion air) and high temperatures. Whereas for the automatically controlled pellets stove local situations (e.g., hindered air-fuel mixing due to heaps of pellets on the burner pot) determine the emission levels and composition. Wood samples contain more potentially carcinogenic PAHs with respect to pellets samples. Some diagnostic ratios related to PAH isomers and anhydrosugars compiled from experimental UFP data in the present study and compared to literature values proposed for the emission source discrimination for atmospheric aerosol, extend the evaluation usually limited to higher particle size fractions also to UFP.

Phase-I monitoring of standard deviations in multistage linear profiles

NASA Astrophysics Data System (ADS)

Kalaei, Mahdiyeh; Soleimani, Paria; Niaki, Seyed Taghi Akhavan; Atashgar, Karim

2018-03-01

In most modern manufacturing systems, products are often the output of some multistage processes. In these processes, the stages are dependent on each other, where the output quality of each stage depends also on the output quality of the previous stages. This property is called the cascade property. Although there are many studies in multistage process monitoring, there are fewer works on profile monitoring in multistage processes, especially on the variability monitoring of a multistage profile in Phase-I for which no research is found in the literature. In this paper, a new methodology is proposed to monitor the standard deviation involved in a simple linear profile designed in Phase I to monitor multistage processes with the cascade property. To this aim, an autoregressive correlation model between the stages is considered first. Then, the effect of the cascade property on the performances of three types of T 2 control charts in Phase I with shifts in standard deviation is investigated. As we show that this effect is significant, a U statistic is next used to remove the cascade effect, based on which the investigated control charts are modified. Simulation studies reveal good performances of the modified control charts.

Integrated butanol recovery for an advanced biofuel: current state and prospects.

PubMed

Xue, Chuang; Zhao, Jing-Bo; Chen, Li-Jie; Bai, Feng-Wu; Yang, Shang-Tian; Sun, Jian-Xin

2014-04-01

Butanol has recently gained increasing interest due to escalating prices in petroleum fuels and concerns on the energy crisis. However, the butanol production cost with conventional acetone-butanol-ethanol fermentation by Clostridium spp. was higher than that of petrochemical processes due to the low butanol titer, yield, and productivity in bioprocesses. In particular, a low butanol titer usually leads to an extremely high recovery cost. Conventional biobutanol recovery by distillation is an energy-intensive process, which has largely restricted the economic production of biobutanol. This article thus reviews the latest studies on butanol recovery techniques including gas stripping, liquid-liquid extraction, adsorption, and membrane-based techniques, which can be used for in situ recovery of inhibitory products to enhance butanol production. The productivity of the fermentation system is improved efficiently using the in situ recovery technology; however, the recovered butanol titer remains low due to the limitations from each one of these recovery technologies, especially when the feed butanol concentration is lower than 1 % (w/v). Therefore, several innovative multi-stage hybrid processes have been proposed and are discussed in this review. These hybrid processes including two-stage gas stripping and multi-stage pervaporation have high butanol selectivity, considerably higher energy and production efficiency, and should outperform the conventional processes using single separation step or method. The development of these new integrated processes will give a momentum for the sustainable production of industrial biobutanol.

An assessment of Lot Quality Assurance Sampling to evaluate malaria outcome indicators: extending malaria indicator surveys

PubMed Central

Biedron, Caitlin; Pagano, Marcello; Hedt, Bethany L; Kilian, Albert; Ratcliffe, Amy; Mabunda, Samuel; Valadez, Joseph J

2010-01-01

Background Large investments and increased global prioritization of malaria prevention and treatment have resulted in greater emphasis on programme monitoring and evaluation (M&E) in many countries. Many countries currently use large multistage cluster sample surveys to monitor malaria outcome indicators on a regional and national level. However, these surveys often mask local-level variability important to programme management. Lot Quality Assurance Sampling (LQAS) has played a valuable role for local-level programme M&E. If incorporated into these larger surveys, it would provide a comprehensive M&E plan at little, if any, extra cost. Methods The Mozambique Ministry of Health conducted a Malaria Indicator Survey (MIS) in June and July 2007. We applied LQAS classification rules to the 345 sampled enumeration areas to demonstrate identifying high- and low-performing areas with respect to two malaria program indicators—‘household possession of any bednet’ and ‘household possession of any insecticide-treated bednet (ITN)’. Results As shown by the MIS, no province in Mozambique achieved the 70% coverage target for household possession of bednets or ITNs. By applying LQAS classification rules to the data, we identify 266 of the 345 enumeration areas as having bednet coverage severely below the 70% target. An additional 73 were identified with low ITN coverage. Conclusions This article demonstrates the feasibility of integrating LQAS into multistage cluster sampling surveys and using these results to support a comprehensive national, regional and local programme M&E system. Furthermore, in the recommendations we outlined how to integrate the Large Country-LQAS design into macro-surveys while still obtaining results available through current sampling practices. PMID:20139435

Worm infestation and anaemia among pre-school children of peasant farmers in Calabar, Nigeria.

PubMed

Anah, M U; Ikpeme, O E; Etuk, I S; Yong, K E; Ibanga, I; Asuquo, B E

2008-09-01

Worm infection and anaemia are common childhood conditions in Nigeria. We assessed the status of helminthiasis and associated anaemia among pre school children of peasant farmers aged 1-5 years living in a rubber plantation near Calabar, Nigeria. Cross sectional. Three hundred and fifty children were selected by multi-stage cluster sampling technique. Freshly passed stool was examined using Kato-Katz method while anaemia was estimated using haematocrit technique. Of the 350 children, 174 (49.7%) had intestinal helminths: Ascaris lumbricoides 64.4%, hookworms 10.9% and Trichuris trichuria 1.1%. There were 41(23.6%) children with polyparasitism, 33 of them were due to Ascaris lumbricoides and hookworms. The worm load was generally light in intensity with egg per gram of stool ranging from 24-60,960. Males (28.9%) were infected more than females (20.8%). The frequency of infection increases with age. The prevalence of anaemia among the entire study population and in those infected with worms was 56.6% and 56.9% respectively. With polyparasitism there was a relative increase in the frequency of anaemia females > males. Worm infections and anaemia are common in our children. A comprehensive control strategy involving good sanitation, sinking of bore hole for clean water supply and regular deworming exercises are recommended.

Paraffin wax removal from metal injection moulded cocrmo alloy compact by solvent debinding process

NASA Astrophysics Data System (ADS)

Dandang, N. A. N.; Harun, W. S. W.; Khalil, N. Z.; Ahmad, A. H.; Romlay, F. R. M.; Johari, N. A.

2017-10-01

One of the most crucial and time consuming phase in metal injection moulding (MIM) process is “debinding”. These days, in metal injection moulding process, they had recounted that first debinding practice was depend on thermal binder degradation, which demanding more than 200 hours for complete removal of binder. Fortunately, these days world had introduced multi-stage debinding techniques to simplified the debinding time process. This research study variables for solvent debinding which are temperature and soaking time for samples made by MIM CoCrMo powder. Since wax as the key principal in the binder origination, paraffin wax will be removed together with stearic acid from the green bodies. Then, debinding process is conducted at 50, 60 and 70°C for 30-240 minutes. It is carried out in n-heptane solution. Percentage weight loss of the binder were measured. Lastly, scanning electron microscope (SEM) analysis and visual inspection were observed for the surface of brown compact. From the results, samples debound at 70°C exhibited a significant amount of binder loss; nevertheless, sample collapse, brittle surface and cracks were detected. But, at 60°C temperature and time of 4 hours proven finest results as it shows sufficient binder loss, nonappearance of surface cracks and easy to handle. Overall, binder loss is directly related to solvent debinding temperature and time.

Predictors of adolescents' mental health problems in Saudi Arabia: findings from the Jeeluna® national study.

PubMed

Abou Abbas, Oraynab; AlBuhairan, Fadia

2017-01-01

Depression and anxiety among adolescents require further attention as they have profound harmful implications on several aspects of adolescents' wellbeing and can be associated with life threatening risk behaviors such as suicide. To examine the underlying risk factors for feeling so sad or hopeless and for feeling worried among adolescents in Saudi Arabia. Data from Jeeluna ® national survey was used. A cross-sectional, multi-stage, stratified, cluster random sampling technique was applied among a sample of students aged 10-19 years attending intermediate and secondary schools in Saudi Arabia. A self-administered questionnaire assessing several domains, including feeling so sad or hopeless and worried, was used to collect data. Logistic regression models were fitted to determine the different factors associated with mental health. A sample of 12,121 students was included in this study. Feeling so sad or hopeless and feeling worried were significantly more prevalent among females and older adolescents ( p  < 0.0001). The results showed that poor relationship with parents, negative body image, and chronic illness to be significantly associated with feeling so sad or hopeless and worried. Symptoms suggestive of mental health problems among adolescents in Saudi Arabia are prevalent and deserve special attention. Adopting effective strategies, including regular screening and intervention programs are highly needed to better address, detect, and control early signs of these problems.

Impact of Dental Disorders and its Influence on Self Esteem Levels among Adolescents.

PubMed

Kaur, Puneet; Singh, Simarpreet; Mathur, Anmol; Makkar, Diljot Kaur; Aggarwal, Vikram Pal; Batra, Manu; Sharma, Anshika; Goyal, Nikita

2017-04-01

Self esteem is more of a psychological concept therefore, even the common dental disorders like dental trauma, tooth loss and untreated carious lesions may affect the self esteem thus influencing the quality of life. This study aims to assess the impact of dental disorders among the adolescents on their self esteem level. The present cross-sectional study was conducted among 10 to 17 years adolescents. In order to obtain a representative sample, multistage sampling technique was used and sample was selected based on Probability Proportional to Enrolment size (PPE). Oral health assessment was carried out using WHO type III examination and self esteem was estimated using the Rosenberg Self Esteem Scale score (RSES). The descriptive and inferential analysis of the data was done by using IBM SPSS software. Logistic and linear regression analysis was executed to test the individual association of different independent clinical variables with self esteem. Total sample of 1140 adolescents with mean age of 14.95 ±2.08 and RSES of 27.09 ±3.12 were considered. Stepwise multiple linear regression analysis was applied and best predictors in relation to RSES in the descending order were Dental Health Component (DHC), Aesthetic Component (AC), dental decay {(aesthetic zone), (masticatory zone)}, tooth loss {(aesthetic zone), (masticatory zone)} and anterior fracture of tooth. It was found that various dental disorders like malocclusion, anterior traumatic tooth, tooth loss and untreated decay causes a profound impact on aesthetics and psychosocial behaviour of adolescents, thus affecting their self esteem.

Design, construction and evaluation of a 12.2 GHz, 4.0 kW-CW high efficiency klystron amplifier. [for satellite-borne TV broadcast transmitters

NASA Technical Reports Server (NTRS)

Vishida, J. M.; Brodersen, L. K.

1974-01-01

An analytical and experimental program is described, for studying design techniques for optimizing the conversion efficiency of klystron amplifiers, and to utilize these techniques in the development and fabrication of an X-band 4 kW cw klystron, for use in satellite-borne television broadcast transmitters. The design is based on a technique for increasing the RF beam current by using the second harmonic space charge forces in the bunched beam. Experimental analysis was also made of a method to enhance circuit efficiency in the klystron cavities. The design incorporates a collector which is demountable from the tube to facilitate multistage depressed collector experiments employing an axisymmetric, electrostatic collector for linear beam microwave tubes.

Enhancing Community Knowledge and Health Behaviors to Eliminate Blinding Trachoma in Mali Using Radio Messaging as a Strategy

ERIC Educational Resources Information Center

Bamani, Sanoussi; Toubali, Emily; Diarra, Sadio; Goita, Seydou; Berte, Zana; Coulibaly, Famolo; Sangare, Hama; Tuinsma, Marjon; Zhang, Yaobi; Dembele, Benoit; Melvin, Palesa; MacArthur, Chad

2013-01-01

The National Blindness Prevention Program in Mali has broadcast messages on the radio about trachoma as part of the country's trachoma elimination strategy since 2008. In 2011, a radio impact survey using multi-stage cluster sampling was conducted in the regions of Kayes and Segou to assess radio listening habits, coverage of the broadcasts,…

Assessing insect-induced tree mortality across large areas with high-resolution aerial photography in a multistage sample

Treesearch

Randy Hamilton; Kevin Megown; James Ellenwood; Henry Lachowski; Paul Maus

2010-01-01

In recent years, unprecedented tree mortality has occurred throughout the national forests owing to insect infestations and disease outbreaks. The magnitude and extent of mortality, coupled with the lack of routine monitoring in some areas, has made it difficult to assess the damage, associated ecological impact, and fire hazard in a timely and cost-effective manner....

A multistage stochastic programming model for a multi-period strategic expansion of biofuel supply chain under evolving uncertainties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, Fei; Huang, Yongxi

Here, we develop a multistage, stochastic mixed-integer model to support biofuel supply chain expansion under evolving uncertainties. By utilizing the block-separable recourse property, we reformulate the multistage program in an equivalent two-stage program and solve it using an enhanced nested decomposition method with maximal non-dominated cuts. We conduct extensive numerical experiments and demonstrate the application of the model and algorithm in a case study based on the South Carolina settings. The value of multistage stochastic programming method is also explored by comparing the model solution with the counterparts of an expected value based deterministic model and a two-stage stochastic model.

A multistage stochastic programming model for a multi-period strategic expansion of biofuel supply chain under evolving uncertainties

DOE PAGES

Xie, Fei; Huang, Yongxi

2018-02-04

Here, we develop a multistage, stochastic mixed-integer model to support biofuel supply chain expansion under evolving uncertainties. By utilizing the block-separable recourse property, we reformulate the multistage program in an equivalent two-stage program and solve it using an enhanced nested decomposition method with maximal non-dominated cuts. We conduct extensive numerical experiments and demonstrate the application of the model and algorithm in a case study based on the South Carolina settings. The value of multistage stochastic programming method is also explored by comparing the model solution with the counterparts of an expected value based deterministic model and a two-stage stochastic model.

ERTS data user investigation to develop a multistage forest sampling inventory system

NASA Technical Reports Server (NTRS)

Langley, P. G.; Vanroessel, J. W. (Principal Investigator); Wert, S. L.

1973-01-01

The author has identified the following significant results. A system to provide precision annotation of predetermined forest inventory sampling units on the ERTS-1 MSS images was developed. In addition, an annotation system for high altitude U2 photographs was completed. MSS bulk image accuracy is good enough to allow the use of one square mile sampling units. IMANCO image analyzer interpretation work for small scale images demonstrated the need for much additional analyses. Continuing image interpretation work for the next reporting period is concentrated on manual image interpretation work as well as digital interpretation system development using the computer compatible tapes.

Simulation of multistage turbine flows

NASA Technical Reports Server (NTRS)

Adamczyk, John J.; Mulac, Richard A.

1987-01-01

A flow model has been developed for analyzing multistage turbomachinery flows. This model, referred to as the average passage flow model, describes the time-averaged flow field with a typical passage of a blade row embedded within a multistage configuration. Computer resource requirements, supporting empirical modeling, formulation code development, and multitasking and storage are discussed. Illustrations from simulations of the space shuttle main engine (SSME) fuel turbine performed to date are given.

Modelling and Characterisation of Detection Models in WAMI for Handling Negative Information

DTIC Science & Technology

2014-02-01

behaviour of the multi-stage detectors used in LoFT. This model is then used in a Probabilistic Hypothesis Density Filter (PHD). Unlike most multitarget...Therefore, we decided to use machine learning techniques which could model — and pre- dict — the behaviour of the detectors in LoFT. Because we are using...on feature detectors [8], motion models [13] and descriptor and template adaptation [9]. 2.3.2 State Model The state space of LoFT is defined in 2D

Spectral linewidth preservation in parametric frequency combs seeded by dual pumps.

PubMed

Tong, Zhi; Wiberg, Andreas O J; Myslivets, Evgeny; Kuo, Bill P P; Alic, Nikola; Radic, Stojan

2012-07-30

We demonstrate new technique for generation of programmable-pitch, wideband frequency combs with low phase noise. The comb generation was achieved using cavity-less, multistage mixer driven by two tunable continuous-wave pump seeds. The approach relies on phase-correlated continuous-wave pumps in order to cancel spectral linewidth broadening inherent to parametric comb generation. Parametric combs with over 200-nm bandwidth were obtained and characterized with respect to phase noise scaling to demonstrate linewidth preservation over 100 generated tones.

Chaotic Time Series Analysis Method Developed for Stall Precursor Identification in High-Speed Compressors

NASA Technical Reports Server (NTRS)

1997-01-01

A new technique for rotating stall precursor identification in high-speed compressors has been developed at the NASA Lewis Research Center. This pseudo correlation integral method uses a mathematical algorithm based on chaos theory to identify nonlinear dynamic changes in the compressor. Through a study of four various configurations of a high-speed compressor stage, a multistage compressor rig, and an axi-centrifugal engine test, this algorithm, using only a single pressure sensor, has consistently predicted the onset of rotating stall.

Design of Advanced Blading for a High-Speed HP Compressor Using an S1-S2 Flow Calculation System.

DTIC Science & Technology

1990-11-01

Howell multistage compressor speed squared) and pressure ratio for the initial prediction method (7), with an arbitrary increase of design are given in...improved performance of axial compressors with leading designs to be produced with the current SI-S2 edge normal shock waves, system. However, it is...performance of the new (7) Howell A R and Calvert W J, A new stage- design was extremely encouraging, with a peak stacking technique for axial -flow

Deep Vein Thrombosis After Complex Posterior Spine Surgery: Does Staged Surgery Make a Difference?

PubMed

Edwards, Charles C; Lessing, Noah L; Ford, Lisa; Edwards, Charles C

Retrospective review of a prospectively collected database. To assess the incidence of deep vein thrombosis (DVT) associated with single- versus multistage posterior-only complex spinal surgeries. Dividing the physiologic burden of spinal deformity surgery into multiple stages has been suggested as a potential means of reducing perioperative complications. DVT is a worrisome complication owing to its potential to lead to pulmonary embolism. Whether or not staging affects DVT incidence in this population is unknown. Consecutive patients undergoing either single- or multistage posterior complex spinal surgeries over a 12-year period at a single institution were eligible. All patients received lower extremity venous duplex ultrasonographic (US) examinations 2 to 4 days postoperatively in the single-stage group and 2 to 4 days postoperatively after each stage in the multistage group. Multivariate logistic regression was used to assess the independent contribution of staging to developing a DVT. A total of 107 consecutive patients were enrolled-26 underwent multistage surgery and 81 underwent single-stage surgery. The single-stage group was older (63 years vs. 45 years; p < .01) and had a higher Charlson comorbidity index (2.25 ± 1.27 vs. 1.23 ± 1.58; p < .01). More multistage patients had positive US tests than single-stage patients (5 of 26 vs. 6 of 81; 19% vs. 7%; p = .13). Adjusting for all the above-mentioned covariates, a multistage surgery was 8.17 (95% CI 0.35-250.6) times more likely to yield a DVT than a single-stage surgery. Patients who undergo multistage posterior complex spine surgery are at a high risk for developing a DVT compared to those who undergo single-stage procedures. The difference in DVT incidence may be understated as the multistage group had a lower pre- and intraoperative risk profile with a younger age, lower medical comorbidities, and less per-stage blood loss. Copyright © 2017 Scoliosis Research Society. Published by Elsevier Inc. All rights reserved.

An Adaptive Technique for a Redundant-Sensor Navigation System. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Chien, T. T.

1972-01-01

An on-line adaptive technique is developed to provide a self-contained redundant-sensor navigation system with a capability to utilize its full potentiality in reliability and performance. The gyro navigation system is modeled as a Gauss-Markov process, with degradation modes defined as changes in characteristics specified by parameters associated with the model. The adaptive system is formulated as a multistage stochastic process: (1) a detection system, (2) an identification system and (3) a compensation system. It is shown that the sufficient statistics for the partially observable process in the detection and identification system is the posterior measure of the state of degradation, conditioned on the measurement history.

Calculating stage duration statistics in multistage diseases.

PubMed

Komarova, Natalia L; Thalhauser, Craig J

2011-01-01

Many human diseases are characterized by multiple stages of progression. While the typical sequence of disease progression can be identified, there may be large individual variations among patients. Identifying mean stage durations and their variations is critical for statistical hypothesis testing needed to determine if treatment is having a significant effect on the progression, or if a new therapy is showing a delay of progression through a multistage disease. In this paper we focus on two methods for extracting stage duration statistics from longitudinal datasets: an extension of the linear regression technique, and a counting algorithm. Both are non-iterative, non-parametric and computationally cheap methods, which makes them invaluable tools for studying the epidemiology of diseases, with a goal of identifying different patterns of progression by using bioinformatics methodologies. Here we show that the regression method performs well for calculating the mean stage durations under a wide variety of assumptions, however, its generalization to variance calculations fails under realistic assumptions about the data collection procedure. On the other hand, the counting method yields reliable estimations for both means and variances of stage durations. Applications to Alzheimer disease progression are discussed.

Design and numerical investigations of a counter-rotating axial compressor for a geothermal power plant application

NASA Astrophysics Data System (ADS)

Qualman, Thomas, II

Geothermal provides a steady source of energy unlike other renewable sources, however, there are non-condensable gases (NCG's) that need to be removed before the steam enters the turbine/generator or the efficiency suffers. By utilizing a multistage counter-rotating axial compressor with integrated composite wound impellers the process of removing NCG's could be significantly improved. The novel composite impeller design provides a high level of corrosion resistance, a good strength to weight ratio, reduced size, and reduced manufacturing and maintenance costs. This thesis focuses on the design of the first 3 stages of a multistage counter-rotating axial compressor with integrated composite wound impellers for NCG removal. Because of the novel technique, an unusual set of constraints required a simplified 1 and 2D design methodology to be developed and investigated through CFD. The results indicate that by utilizing constant thickness blades with constant shroud radius (to ease manufacturing difficulties) a total pressure ratio of 1.37 with a total polytropic efficiency of 89.81% could be achieved.

Multistage morphological segmentation of bright-field and fluorescent microscopy images

NASA Astrophysics Data System (ADS)

Korzyńska, A.; Iwanowski, M.

2012-06-01

This paper describes the multistage morphological segmentation method (MSMA) for microscopic cell images. The proposed method enables us to study the cell behaviour by using a sequence of two types of microscopic images: bright field images and/or fluorescent images. The proposed method is based on two types of information: the cell texture coming from the bright field images and intensity of light emission, done by fluorescent markers. The method is dedicated to the image sequences segmentation and it is based on mathematical morphology methods supported by other image processing techniques. The method allows for detecting cells in image independently from a degree of their flattening and from presenting structures which produce the texture. It makes use of some synergic information from the fluorescent light emission image as the support information. The MSMA method has been applied to images acquired during the experiments on neural stem cells as well as to artificial images. In order to validate the method, two types of errors have been considered: the error of cell area detection and the error of cell position using artificial images as the "gold standard".

PREDICTORS OF INTESTINAL HELMINTHIC INFECTIONS AMONG SCHOOL CHILDREN IN GWAGWALADA, ABUJA, NIGERIA.

PubMed

Nwalorzie, C; Onyenakazi, S C; Ogwu, S O; Okafor, A N

2015-01-01

Prevalence and risk factors predisposing to intestinal helminthic infections vary widely. Risk factors to intestinal helminthic infections among children have not been documented in Gwagwalada, Nigeria which necessitated present study. To determine risk factors to intestinal helminthiasis among children aged 1-15 years in Gwagwalada, Nigeria. Cross-sectional study was carried out from June to November, 2011 in public schools using multi-staged, random sampling. Risk factors and helminth species were determined. Multiple stool samples were analyzed using the Kato-Katz technique. Participants had a single anal swab to search for Enterobius ova. Of 220 subjects evaluated, prevalence rate of intestinal helminthic infections was 73.2%. Most common helminth identified was Ascaris lumbricoides (40.9%) and least was Trichostrongylus species (2.3%). Logistic regression analysis showed that significant, predictors of intestinal helminthiasis among subjects were female gender (P = 0.028), lack of hand washing after defecation (P < 0.01), multiple sources of drinking water (P = 0.011) and eating of unwashed fruits/vegetables (P = 0.012). The present study identified predictors of intestinal helminthiasis among children Gwagwalada. Efforts should be made to institute regular health education, provision of potable water, environmental sanitation and de-worming programmes for children, as ways of reducing burden of the infections.

Relationship between the levels of family burden in caring for older people with the incidence of mistreatment.

PubMed

Rekawati, Etty; Hamid, AchirYani S; Sahar, Junaiti; Widyatuti

2018-02-01

Caring for older people can be a burden for the family that led to mistreatment. To determine the relationship between the levels of family burden in caring for older people with the occurrence of mistreatment incidence. A cross sectional study design was conducted with 135 older people who live with their family as respondents. 135 families with older people at Kelurahan/Village of Harjamukti area, Kecamatan/ District of Cimanggis, Depok city. This study applied probability sampling technique with multistage cluster sampling. Family characteristics show that almost half of older people were caring by family members (caregivers) who were aged 20-39 years, nearly all caregivers were women, family income mostly less than UMK, families mostly monosyllabic nation Betawi and caregivers mostly were their own child. Most of the families stated that no expense in caring for the older people (89.6%), but there are still families who feel the burden of caring. The highest type of mistreatmet of the older people is psychological mistreatments. From the statistical test obtained by p value equals to 0.553, it was concluded there was no correlation between the incidences of any family burden with mistreatment. Copyright © 2018 Elsevier España, S.L.U. All rights reserved.

The Role of Adolescent Victimization in Energy Drink Consumption: Monitoring the Future, 2010-2016.

PubMed

Jackson, Dylan B; Leal, Wanda E; Posick, Chad; Vaughn, Michael G; Olivan, Myrah

2018-05-21

Energy drinks have been linked to a number of deleterious health outcomes among youth. Even so, the underlying risk factors for energy drink consumption among youth are less frequently examined. The present study examines the link between adolescent victimization experiences (i.e., property and violent victimization) and energy drink consumption among a nationally representative sample of adolescents. We employed the seven most recent cohorts (2010-2016) from the Monitoring the Future (MTF) study. A multi-stage random sampling technique was used to acquire the U.S. Youths reported the extent to which they consumed energy drinks. Additionally, three indicators of property victimization and four indicators of violent victimization were available in the data. The findings reveal a significant dose-response relationship between energy drink consumption and victimization. This relationship was especially pronounced among females. For instance, more than 52% of females with the highest count of various violent victimization experiences consumed energy drinks, which was three times the rate of females who had no previous violent victimization experiences. Practitioners who interact with adolescent victims may probe for energy drink usage in addition to other addictive substances such as alcohol, tobacco, and drugs. Additional scrutiny may also be in order in regulating the amount of caffeine and sugar allowed in these beverages.

Sex differences in obesity, dietary habits, and physical activity among urban middle-class Bangladeshis.

PubMed

Saquib, Juliann; Saquib, Nazmus; Stefanick, Marcia L; Khanam, Masuma Akter; Anand, Shuchi; Rahman, Mahbubur; Chertow, Glenn M; Barry, Michele; Ahmed, Tahmeed; Cullen, Mark R

2016-07-01

The sustained economic growth in Bangladesh during the previous decade has created a substantial middle-class population, who have adequate income to spend on food, clothing, and lifestyle management. Along with the improvements in living standards, has also come negative impact on health for the middle class. The study objective was to assess sex differences in obesity prevalence, diet, and physical activity among urban middle-class Bangladeshi. In this cross-sectional study, conducted in 2012, we randomly selected 402 adults from Mohammedpur, Dhaka. The sampling technique was multi-stage random sampling. We used standardized questionnaires for data collection and measured height, weight, and waist circumference. Mean age (standard deviation) was 49.4 (12.7) years. The prevalence of both generalized (79% vs. 53%) and central obesity (85% vs. 42%) were significantly higher in women than men. Women reported spending more time watching TV and spending less time walking than men (p<.05); however, men reported a higher intake of unhealthy foods such as fast food and soft drinks. We conclude that the prevalence of obesity is significantly higher in urban middle-class Bangladeshis than previous urban estimates, and the burden of obesity disproportionately affects women. Future research and public health efforts are needed to address this severe obesity problem and to promote active lifestyles.

Gender differences in leisure-time versus non-leisure-time physical activity among Saudi adolescents.

PubMed

Al-Sobayel, Hana; Al-Hazzaa, Hazzaa M; Abahussain, Nanda A; Qahwaji, Dina M; Musaiger, Abdulrahman O

2015-01-01

The aim of the study was to examine the gender differences and predictors of leisure versus non-leisure time physical activities among Saudi adolescents aged 14-19 years. The multistage stratified cluster random sampling technique was used. A sample of 1,388 males and 1,500 females enrolled in secondary schools in three major cities in Saudi Arabia was included. Anthropometric measurements were performed and Body Mass Index was calculated. Physical activity, sedentary behaviours and dietary habits were measured using a self-reported validated questionnaire. The total time spent in leisure and non-leisure physical activity per week was 90 and 77 minutes, respectively. The males spent more time per week in leisure-time physical activities than females. Females in private schools spent more time during the week in leisure-time physical activities, compared to females in Stateschools. There was a significant difference between genders by obesity status interaction in leisure-time physical activity. Gender, and other factors, predicted total duration spent in leisure-time and non-leisure-time physical activity. The study showed that female adolescents are much less active than males, especially in leisure-time physical activities. Programmes to promote physical activity among adolescents are urgently needed, with consideration of gender differences.

Perceptions of rural women about contraceptive usage in district Khushab, Punjab.

PubMed

Tabassum, Aqeela; Manj, Yasir Nawaz; Gunjial, Tahira Rehman; Nazir, Salma

2016-12-01

To identify the perceptions of rural women about modern contraceptive methods and to ascertain the psycho-social and economic attitude of women about family planning methods. This cross-sectional study was conducted at the University of Sargodha, Sargodha, Pakistan, from December 2014 to March 2015, and comprised married women. The sample was selected using multistage sampling technique through Fitzgibbon table. They were interviewed regarding use of family planning methods. . SPSS 16 was used for data analysis. Of the 500 women, 358(71.6%) were never-users and 142(28.4%) were past-users of family planning methods. Moreover, 52(14.5%) of never-users did not know about a single modern contraceptive method. Of the past-users, 43(30.3%) knew about 1-3 methods and 99(69.7%) about 4 or more methods. Furthermore, 153(30.6%) respondents graded condoms as good, 261(55.2%) agreed that family planning helped in improving one's standard of living to a great extent while 453(90.6%) indicated that family planning methods were not expensive. Besides, 366(71.2%) respondents believed that using contraceptive method caused infertility. Dissatisfaction with methods, method failure, bad experiences with side effects, privacy concerns and different myths associated to the methods were strongly related to the non-usage of modern contraceptive methods.

DNA pooling: a comprehensive, multi-stage association analysis of ACSL6 and SIRT5 polymorphisms in schizophrenia.

PubMed

Chowdari, K V; Northup, A; Pless, L; Wood, J; Joo, Y H; Mirnics, K; Lewis, D A; Levitt, P R; Bacanu, S-A; Nimgaonkar, V L

2007-04-01

Many candidate gene association studies have evaluated incomplete, unrepresentative sets of single nucleotide polymorphisms (SNPs), producing non-significant results that are difficult to interpret. Using a rapid, efficient strategy designed to investigate all common SNPs, we tested associations between schizophrenia and two positional candidate genes: ACSL6 (Acyl-Coenzyme A synthetase long-chain family member 6) and SIRT5 (silent mating type information regulation 2 homologue 5). We initially evaluated the utility of DNA sequencing traces to estimate SNP allele frequencies in pooled DNA samples. The mean variances for the DNA sequencing estimates were acceptable and were comparable to other published methods (mean variance: 0.0008, range 0-0.0119). Using pooled DNA samples from cases with schizophrenia/schizoaffective disorder (Diagnostic and Statistical Manual of Mental Disorders edition IV criteria) and controls (n=200, each group), we next sequenced all exons, introns and flanking upstream/downstream sequences for ACSL6 and SIRT5. Among 69 identified SNPs, case-control allele frequency comparisons revealed nine suggestive associations (P<0.2). Each of these SNPs was next genotyped in the individual samples composing the pools. A suggestive association with rs 11743803 at ACSL6 remained (allele-wise P=0.02), with diminished evidence in an extended sample (448 cases, 554 controls, P=0.062). In conclusion, we propose a multi-stage method for comprehensive, rapid, efficient and economical genetic association analysis that enables simultaneous SNP detection and allele frequency estimation in large samples. This strategy may be particularly useful for research groups lacking access to high throughput genotyping facilities. Our analyses did not yield convincing evidence for associations of schizophrenia with ACSL6 or SIRT5.

Impact of healthy work environments and multistage nurse residency programs on retention of newly licensed RNs.

PubMed

Kramer, Marlene; Halfer, Diana; Maguire, Pat; Schmalenberg, Claudia

2012-03-01

The objective of the study was to examine effects of nurse-confirmed healthy unit work environments and multistage nurse residency programs (NRPs) on retention rates of newly licensed RNs (NLRNs). Establishing a culture of retention and healthy clinical nurse practice environments are two major challenges confronting nurse leaders today. Nurse residency programs are a major component of NLRN work environments and have been shown to be effective in abating nurse turnover. Sample for this study consisted of 5,316 new graduates in initial RN roles in 28 Magnet® hospitals. There were no differences in retention rates by education or patient population on clinical unit. NLRN retention rate was higher in community than in academic hospitals. More than half of NLRNs were placed on units with very healthy work environments. Newly licensed RNs on units with work environments needing improvement resigned at a significantly higher rate than did other NLRNs. The quality of clinical unit work environments is the most important factor in NLRN retention.

Effectiveness of Family, Child, and Family-Child Based Intervention on ADHD Symptoms of Students with Disabilities

ERIC Educational Resources Information Center

Malekpour, Mokhtar; Aghababaei, Sara; Hadi, Samira

2014-01-01

The aim of the present study was to investigate and compare the effectiveness of family, child, and family-child based intervention on the rate of ADHD symptoms in third grade students. The population for this study was all of students with ADHD diagnoses in the city of Isfahan, Iran. The multistage random sampling method was used to select the 60…

[Personality profile among cocaine users].

PubMed

Sánchez Huesca, R; Guisa Cruz, V M; Cedillo González, A; Pascual Blanco, Y

2002-01-01

Due to the psychiatric comorbidity seen among cocaine addicts, it is of clinical interest to know the personality traits associated to the use of this substance. Personality-profile comparative study of cocaine users and multiple-substance users obtained through the Multistage Personality Inventory. The study analyzed a sample of 30 cocaine users and 26 users of various substances who asked for treatment at a specialized institution. Results show the same profile for both groups, with high 8-4-2 scales. According to the Multistage Personality Inventory, this profile corresponds to an antisocial personality disorder with depressive and schizoid traits. The fact that there is a single profile for different drug users leads us to the hypothesis that there are addictive personality characteristics rather than specific traits related to the use of each substance. These subjects' personality characteristics suggest that the fear to relate to others could make it very difficult to establish a therapeutic link. This, in addition to the acting up tendency seen among users, constitutes a call of alert in terms of their likely abandonment of treatment. Further more, as they take impulses into actions, they build a barrier before words. This could be called acting up, doing instead of saying, which can become an obstacle for the appropriate development of the therapeutic process. The result must consider the size of the sample.

Multi-stage decoding for multi-level block modulation codes

NASA Technical Reports Server (NTRS)

Lin, Shu; Kasami, Tadao

1991-01-01

Various types of multistage decoding for multilevel block modulation codes, in which the decoding of a component code at each stage can be either soft decision or hard decision, maximum likelihood or bounded distance are discussed. Error performance for codes is analyzed for a memoryless additive channel based on various types of multi-stage decoding, and upper bounds on the probability of an incorrect decoding are derived. It was found that, if component codes of a multi-level modulation code and types of decoding at various stages are chosen properly, high spectral efficiency and large coding gain can be achieved with reduced decoding complexity. It was found that the difference in performance between the suboptimum multi-stage soft decision maximum likelihood decoding of a modulation code and the single stage optimum decoding of the overall code is very small, only a fraction of dB loss in SNR at the probability of an incorrect decoding for a block of 10(exp -6). Multi-stage decoding of multi-level modulation codes really offers a way to achieve the best of three worlds, bandwidth efficiency, coding gain, and decoding complexity.

Effect of multi-stage inoculation on the bacterial and fungal community structure during organic municipal solid wastes composting.

PubMed

Xi, Beidou; He, Xiaosong; Dang, Qiuling; Yang, Tianxue; Li, Mingxiao; Wang, Xiaowei; Li, Dan; Tang, Jun

2015-11-01

In this study, PCR-DGGE method was applied to investigate the impact of multi-stage inoculation treatment on the community composition of bacterial and fungal during municipal solid wastes (MSW) composting process. The results showed that the high temperature period was extended by the multi-stage inoculation treatment, 1day longer than initial-stage inoculation treatment, and 5days longer than non-inoculation treatment. The temperature of the secondary fermentation increased to 51°C with multi-stage inoculation treatment. The multi-stage inoculation method improved the community diversity of bacteria and fungi that the diversity indexes reached the maximum on the 17days and 20days respectively, avoided the competition between inoculations and indigenous microbes, and enhanced the growth of dominant microorganisms. The DNA sequence indicated that various kinds of uncultured microorganisms with determined ratios were detected, which were dominant microbes during the whole fermentation process. These findings call for further researches of compost microbial cultivation technology. Copyright © 2015 Elsevier Ltd. All rights reserved.

Bio-inspired approach to multistage image processing

NASA Astrophysics Data System (ADS)

Timchenko, Leonid I.; Pavlov, Sergii V.; Kokryatskaya, Natalia I.; Poplavska, Anna A.; Kobylyanska, Iryna M.; Burdenyuk, Iryna I.; Wójcik, Waldemar; Uvaysova, Svetlana; Orazbekov, Zhassulan; Kashaganova, Gulzhan

2017-08-01

Multistage integration of visual information in the brain allows people to respond quickly to most significant stimuli while preserving the ability to recognize small details in the image. Implementation of this principle in technical systems can lead to more efficient processing procedures. The multistage approach to image processing, described in this paper, comprises main types of cortical multistage convergence. One of these types occurs within each visual pathway and the other between the pathways. This approach maps input images into a flexible hierarchy which reflects the complexity of the image data. The procedures of temporal image decomposition and hierarchy formation are described in mathematical terms. The multistage system highlights spatial regularities, which are passed through a number of transformational levels to generate a coded representation of the image which encapsulates, in a computer manner, structure on different hierarchical levels in the image. At each processing stage a single output result is computed to allow a very quick response from the system. The result is represented as an activity pattern, which can be compared with previously computed patterns on the basis of the closest match.

Analysis of multigrid methods on massively parallel computers: Architectural implications

NASA Technical Reports Server (NTRS)

Matheson, Lesley R.; Tarjan, Robert E.

1993-01-01

We study the potential performance of multigrid algorithms running on massively parallel computers with the intent of discovering whether presently envisioned machines will provide an efficient platform for such algorithms. We consider the domain parallel version of the standard V cycle algorithm on model problems, discretized using finite difference techniques in two and three dimensions on block structured grids of size 10(exp 6) and 10(exp 9), respectively. Our models of parallel computation were developed to reflect the computing characteristics of the current generation of massively parallel multicomputers. These models are based on an interconnection network of 256 to 16,384 message passing, 'workstation size' processors executing in an SPMD mode. The first model accomplishes interprocessor communications through a multistage permutation network. The communication cost is a logarithmic function which is similar to the costs in a variety of different topologies. The second model allows single stage communication costs only. Both models were designed with information provided by machine developers and utilize implementation derived parameters. With the medium grain parallelism of the current generation and the high fixed cost of an interprocessor communication, our analysis suggests an efficient implementation requires the machine to support the efficient transmission of long messages, (up to 1000 words) or the high initiation cost of a communication must be significantly reduced through an alternative optimization technique. Furthermore, with variable length message capability, our analysis suggests the low diameter multistage networks provide little or no advantage over a simple single stage communications network.

Posttraumatic stress disorder following ethnoreligious conflict in Jos, Nigeria.

PubMed

Obilom, Rose E; Thacher, Tom D

2008-08-01

In September 2001, ethnoreligious rioting occurred in Jos, Nigeria. Using a multistage cluster sampling technique, 290 respondents were recruited in Jos 7 to 9 months after the riot. Data were collected regarding demographics, exposure to traumatic events, and psychological symptoms. Resting pulse and blood pressure were recorded. A total of 145 (52.5%) witnessed or were victims of personal attacks, 165 (59.6%) lost their possessions, 56 (20.7%) had their homes burned, 44 (16.2%) witnessed relatives' deaths, and 8 (2.9%) were robbed. A total of 252 (89.7%) of the respondents met reexperiencing criteria, 138 (49.1%) met avoidance criteria, and 236 (84.0%) met arousal criteria for posttraumatic stress disorder (PTSD). A total of 116 (41%, 95% confidence interval [CI] = 36% to 47%) met all three categories for PTSD. Only personal attacks (adjusted odds ratio = 2.8, 95% CI = 1.7 to 4.7) and a heart rate of 90 beats/min or more (adjusted odds ratio = 2.8, 95% CI = 1.4 to 5.8) were significantly related to PTSD in a multivariate model.

Thermodynamics and Kinetics of Prenucleation Clusters, Classical and Non-Classical Nucleation.

PubMed

Zahn, Dirk

2015-07-20

Recent observations of prenucleation species and multi-stage crystal nucleation processes challenge the long-established view on the thermodynamics of crystal formation. Here, we review and generalize extensions to classical nucleation theory. Going beyond the conventional implementation as has been used for more than a century now, nucleation inhibitors, precursor clusters and non-classical nucleation processes are rationalized as well by analogous concepts based on competing interface and bulk energy terms. This is illustrated by recent examples of species formed prior to/instead of crystal nucleation and multi-step nucleation processes. Much of the discussed insights were obtained from molecular simulation using advanced sampling techniques, briefly summarized herein for both nucleation-controlled and diffusion-controlled aggregate formation. © 2015 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA. This is an open access article under the terms of the Creative Commons Attribution Non-Commercial NoDerivs License, which permits use and distribution in any medium, provided the original work is properly cited, the use is non-commercial and no modifications or adaptations are made.

The usefulness of Skylab/EREP S-190 and S-192 imagery in multistage forest surveys

NASA Technical Reports Server (NTRS)

Langley, P. G.; Vanroessel, J. (Principal Investigator)

1976-01-01

The author has identified the following significant results. The RMSE of point location achieved with the annotation system on S190A imagery was 100 m and 90 m in the x and y direction, respectively. Potential gains in sampling precision attributable to space derived imagery ranged from 4.9 to 43.3 percent depending on the image type, interpretation method, time of year, and sampling method applied. Seasonal variation was significant. S190A products obtained in September yielded higher gains than those obtained in June. Using 100 primary sample units as a base under simple random sampling, the revenue made available for incorporating space acquired data into the sample design to estimate timber volume was as high as $39,400.00.

Configuration of management accounting information system for multi-stage manufacturing

NASA Astrophysics Data System (ADS)

Mkrtychev, S. V.; Ochepovsky, A. V.; Enik, O. A.

2018-05-01

The article presents an approach to configuration of a management accounting information system (MAIS) that provides automated calculations and the registration of normative production losses in multi-stage manufacturing. The use of MAIS with the proposed configuration at the enterprises of textile and woodworking industries made it possible to increase the accuracy of calculations for normative production losses and to organize accounting thereof with the reference to individual stages of the technological process. Thus, high efficiency of multi-stage manufacturing control is achieved.

Multi-megavolt low jitter multistage switch

DOEpatents

Humphreys, D.R.; Penn, K.J. Jr.

1985-06-19

It is one object of the present invention to provide a multistage switch capable of holding off numerous megavolts, until triggered, from a particle beam accelerator of the type used for inertial confinement fusion. The invention provides a multistage switch having low timing jitter and capable of producing multiple spark channels for spreading current over a wider area to reduce electrode damage and increase switch lifetime. The switch has fairly uniform electric fields and a short spark gap for laser triggering and is engineered to prevent insulator breakdowns.

Multidimensional Trellis Coded Phase Modulation Using a Multilevel Concatenation Approach. Part 1; Code Design

NASA Technical Reports Server (NTRS)

Rajpal, Sandeep; Rhee, Do Jun; Lin, Shu

1997-01-01

The first part of this paper presents a simple and systematic technique for constructing multidimensional M-ary phase shift keying (MMK) trellis coded modulation (TCM) codes. The construction is based on a multilevel concatenation approach in which binary convolutional codes with good free branch distances are used as the outer codes and block MPSK modulation codes are used as the inner codes (or the signal spaces). Conditions on phase invariance of these codes are derived and a multistage decoding scheme for these codes is proposed. The proposed technique can be used to construct good codes for both the additive white Gaussian noise (AWGN) and fading channels as is shown in the second part of this paper.

Spatial Control of Functional Response in 4D-Printed Active Metallic Structures

NASA Astrophysics Data System (ADS)

Ma, Ji; Franco, Brian; Tapia, Gustavo; Karayagiz, Kubra; Johnson, Luke; Liu, Jun; Arroyave, Raymundo; Karaman, Ibrahim; Elwany, Alaa

2017-04-01

We demonstrate a method to achieve local control of 3-dimensional thermal history in a metallic alloy, which resulted in designed spatial variations in its functional response. A nickel-titanium shape memory alloy part was created with multiple shape-recovery stages activated at different temperatures using the selective laser melting technique. The multi-stage transformation originates from differences in thermal history, and thus the precipitate structure, at various locations created from controlled variations in the hatch distance within the same part. This is a first example of precision location-dependent control of thermal history in alloys beyond the surface, and utilizes additive manufacturing techniques as a tool to create materials with novel functional response that is difficult to achieve through conventional methods.

Adaptation of Decoy Fusion Strategy for Existing Multi-Stage Search Workflows

NASA Astrophysics Data System (ADS)

Ivanov, Mark V.; Levitsky, Lev I.; Gorshkov, Mikhail V.

2016-09-01

A number of proteomic database search engines implement multi-stage strategies aiming at increasing the sensitivity of proteome analysis. These approaches often employ a subset of the original database for the secondary stage of analysis. However, if target-decoy approach (TDA) is used for false discovery rate (FDR) estimation, the multi-stage strategies may violate the underlying assumption of TDA that false matches are distributed uniformly across the target and decoy databases. This violation occurs if the numbers of target and decoy proteins selected for the second search are not equal. Here, we propose a method of decoy database generation based on the previously reported decoy fusion strategy. This method allows unbiased TDA-based FDR estimation in multi-stage searches and can be easily integrated into existing workflows utilizing popular search engines and post-search algorithms.

Decision Support Requirements in a Unified Life Cycle Engineering (ULCE) Environment. Volume 2. Conceptual Approaches to Optimization.

DTIC Science & Technology

1988-05-01

the meet ehidmli i thm e mpesm of rmbrme pap Ii bprmaeIea s, IDA Mwmaim Ampad le eI.te umm emOw casm d One IqIammeis er~ wh eMA ls is mmidsmwkdMle...in turn, is controlled by the units above it. Dynamic programming is a mathematical technique well suited for optimization of multistage models. This...interval to a desired accuracy. Several region elimination methods have been discussed in the literature, including the Golden Section, Fibonacci

A multi-staged approach to the reconstruction of a burnt Asian face

PubMed Central

Joethy, Janna; Tan, Bien-Keem

2011-01-01

This article describes the management of chemical burns to the Asian face with resultant full thickness loss to the right side of the face including the eyelid and nose. We detail the techniques used to reconstruct the face which include skin grafting according to the aesthetic units of the face, accurate placement of junction lines, use of a chondrocutaneous graft to reconstruct the alar grove and scalp strip grafting for eyebrow reconstruction. We obtained a successful result that minimised scar formation in the burnt Asian face. PMID:21713203

Patient safety culture and job stress among nurses in Mazandaran, Iran.

PubMed

Asefzadeh, Saeed; Kalhor, Rohollah; Tir, Mohammad

2017-12-01

Paying attention to patient safety is a basic right and a necessary issue in providing medical care, and failure to observe it leads to irreparable damage. One of the factors affecting an individuals' performance in an organization is stress, which also endangers their health. To determine the relationship between patient safety culture and levels of job stress among the nurses working in the hospitals affiliated with Mazandaran University of Medical Sciences. The present study was carried out using a cross-sectional method in the hospitals affiliated with Mazandaran University of Medical Sciences in 2016. A multistage stratified sampling method using a Morgan Table was employed to select 380 nurses as the study sample from among 3,180 nurses. They were selected by a multistage stratified sampling method. The study instruments were Stinemetz Standard Job Stress Questionnaire and Hospital Survey on Patient Safety Culture (HSOPSC). After the required data were collected, they were analyzed using descriptive and inferential statistical methods (Pearson correlation, independent-samples t-test, and ANOVA) through SPSS version 23. The results of the present study showed that 75% of the nurses experienced average and high levels of stress. Among different dimensions of safety culture, organizational learning and handoffs and transitions obtained the highest and the lowest scores, respectively (72.5 and 24.5). The mean score of safety culture dimensions was 51.52. The results of the Pearson correlation test showed that there was a direct significant relationship between different dimensions of safety culture among nurses and the level of stress (p≤0.05). According to the findings, patient safety should be considered as a strategic priority for the senior managers of the health system. In order to enhance patient safety, managers should pay special attention to evaluating safety culture in organizations that deliver health service, especially hospitals.

Comorbid Visual and Psychiatric Disabilities Among the Chinese Elderly: A National Population-Based Survey.

PubMed

Guo, Chao; Wang, Zhenjie; Li, Ning; Chen, Gong; Zheng, Xiaoying

2017-12-01

To estimate the prevalence of, and association between, co-morbid visual and psychiatric disabilities among elderly (>65 years-of-age) persons in China. Random representative samples were obtained using multistage, stratified, cluster sampling, with probabilities proportional to size. Standard weighting procedures were used to construct sample weights that reflected this multistage, stratified cluster sampling survey scheme. Logistic regression models were used to elucidate associations between visual and psychiatric disabilities. Among the Chinese elderly, >160,000 persons have co-morbid visual and psychiatric disabilities. The weighted prevalence among this cohort is 123.7 per 100,000 persons. A higher prevalence of co-morbid visual and psychiatric disabilities was found in the oldest-old (p<0.001); women (65-79 years-of-age, p=0.001; ≥80 years-of-age, p=0.004); illiterate (65-79 years-of-age, p<0.001; ≥80 years-of-age, p=0.02); and single elders (65-79 years-of-age, p=0.01; ≥80 years-of-age, p=0.001). Presence of a visual disability was significantly associated with a higher risk of having a psychiatric disability among persons aged ≥80 years-of-age [adjusted odds ratio, 1.24; 95% confidence interval (CI), 1.03-1.54]. A significant number of Chinese elderly persons were living with co-morbid visual and psychiatric disabilities. To address the challenge of these co-morbid disorders among Chinese elders, it is incumbent upon the government to implement additional and more comprehensive prevention and rehabilitation strategies for health-care systems, reinforce health promotion among the elderly, and improve accessibility to health-care services.

Changes in Cartilage Biomarker Levels During a Transcontinental Multistage Footrace Over 4486 km.

PubMed

Mündermann, Annegret; Klenk, Christopher; Billich, Christian; Nüesch, Corina; Pagenstert, Geert; Schmidt-Trucksäss, Arno; Schütz, Uwe

2017-09-01

Cartilage turnover and load-induced tissue changes are frequently assessed by quantifying concentrations of cartilage biomarkers in serum. To date, information on the effects of ultramarathon running on articular cartilage is scarce. Serum concentrations of cartilage oligomeric matrix protein (COMP), matrix metalloproteinase (MMP)-1, MMP-3, MMP-9, COL2-3/4C long mono (C2C), procollagen type II C-terminal propeptide (CPII), and C2C:CPII will increase throughout a multistage ultramarathon. Descriptive laboratory study. Blood samples were collected from 36 runners (4 female; mean age, 49.0 ± 10.7 years; mean body mass index, 23.1 ± 2.3 kg/m 2 [start] and 21.4 ± 1.9 kg/m 2 [finish]) before (t 0 ) and during (t 1 : 1002 km; t 2 : 2132 km; t 3 : 3234 km; t 4 : 4039 km) a 4486-km multistage ultramarathon. Serum COMP, MMP-1, MMP-3, MMP-9, C2C, and CPII levels were assessed using commercial enzyme-linked immunosorbent assays. Linear mixed models were used to detect significant changes in serum biomarker levels over time with the time-varying covariates of body weight, running speed, and daily running time. Serum concentrations of COMP, MMP-9, and MMP-3 changed significantly throughout the multistage ultramarathon. On average, concentrations increased during the first measurement interval (MI1: t 1 -t 0 ) by 22.5% for COMP (95% CI, 0.29-0.71 ng/mL), 22.3% for MMP-3 (95% CI, 0.24-15.37 ng/mL), and 95.6% for MMP-9 (95% CI, 81.7-414.5 ng/mL) and remained stable throughout MI2, MI3, and MI4. Serum concentrations of MMP-1, C2C, CPII, and C2C:CPII did not change significantly throughout the multistage ultramarathon. Changes in MMP-3 were statistically associated with changes in COMP throughout the ultramarathon race (MMP-3: Wald Z = 3.476, P = .001). Elevated COMP levels indicate increased COMP turnover in response to extreme running, and the association between load-induced changes in MMP-3 and changes in COMP suggests the possibility that MMP-3 may be involved in the degradation of COMP. These results suggest that articular cartilage is able to adapt even to extreme physical activity, possibly explaining why the risk of degenerative joint disease is not elevated in the running population.

Multi-stage versus single-stage inflation and deflation cycle for alternating low pressure air mattresses to prevent pressure ulcers in hospitalised patients: a randomised-controlled clinical trial.

PubMed

Demarré, L; Beeckman, D; Vanderwee, K; Defloor, T; Grypdonck, M; Verhaeghe, S

2012-04-01

The duration and the amount of pressure and shear must be reduced in order to minimize the risk of pressure ulcer development. Alternating low pressure air mattresses with multi-stage inflation and deflation cycle of the air cells have been developed to relieve pressure by sequentially inflating and deflating the air cells. Evidence about the effectiveness of this type of mattress in clinical practice is lacking. This study aimed to compare the effectiveness of an alternating low pressure air mattress that has a standard single-stage inflation and deflation cycle of the air cells with an alternating low pressure air mattress with multi-stage inflation and deflation cycle of the air cells. A randomised controlled trial was performed in a convenience sample of 25 wards in five hospitals in Belgium. In total, 610 patients were included and randomly assigned to the experimental group (n=298) or the control group (n=312). In the experimental group, patients were allocated to an alternating low pressure air mattress with multi-stage inflation and deflation cycle of the air cells. In the control group, patients were allocated to an alternating low pressure air mattress with a standard single-stage inflation and deflation cycle of the air cells. The outcome was defined as cumulative pressure ulcer incidence (Grade II-IV). An intention-to-treat analysis was performed. There was no significant difference in cumulative pressure ulcer incidence (Grade II-IV) between both groups (Exp.=5.7%, Contr.=5.8%, p=0.97). When patients developed a pressure ulcer, the median time was 5.0 days in the experimental group (IQR=3.0-8.5) and 8.0 days in the control group (IQR=3.0-8.5) (Mann-Whitney U-test=113, p=0.182). The probability to remain pressure ulcer free during the observation period in this trial did not differ significantly between the experimental group and the control group (log-rank χ(2)=0.013, df=1, p=0.911). An alternating low pressure air mattress with multi-stage inflation and deflation of the air cells does not result in a significantly lower pressure ulcer incidence compared to an alternating low pressure air mattress with a standard single-stage inflation and deflation cycle of the air cells. Both alternating mattress types are equally effective to prevent pressure ulcer development. © 2011 Elsevier Ltd. All rights reserved.

Multi-stage decoding for multi-level block modulation codes

NASA Technical Reports Server (NTRS)

Lin, Shu

1991-01-01

In this paper, we investigate various types of multi-stage decoding for multi-level block modulation codes, in which the decoding of a component code at each stage can be either soft-decision or hard-decision, maximum likelihood or bounded-distance. Error performance of codes is analyzed for a memoryless additive channel based on various types of multi-stage decoding, and upper bounds on the probability of an incorrect decoding are derived. Based on our study and computation results, we find that, if component codes of a multi-level modulation code and types of decoding at various stages are chosen properly, high spectral efficiency and large coding gain can be achieved with reduced decoding complexity. In particular, we find that the difference in performance between the suboptimum multi-stage soft-decision maximum likelihood decoding of a modulation code and the single-stage optimum decoding of the overall code is very small: only a fraction of dB loss in SNR at the probability of an incorrect decoding for a block of 10(exp -6). Multi-stage decoding of multi-level modulation codes really offers a way to achieve the best of three worlds, bandwidth efficiency, coding gain, and decoding complexity.

Multistage Estimation Of Frequency And Phase

NASA Technical Reports Server (NTRS)

Kumar, Rajendra

1991-01-01

Conceptual two-stage software scheme serves as prototype of multistage scheme for digital estimation of phase, frequency, and rate of change of frequency ("Doppler rate") of possibly phase-modulated received sinusoidal signal in communication system in which transmitter and/or receiver traveling rapidly, accelerating, and/or jerking severely. Each additional stage of multistage scheme provides increasingly refined estimate of frequency and phase of signal. Conceived for use in estimating parameters of signals from spacecraft and high dynamic GPS signal parameters, also applicable, to terrestrial stationary/mobile (e.g., cellular radio) and land-mobile/satellite communication systems.

Sexual initiation and associated factors among young women in West Shoa, Ambo Town, Ethiopia: a community-based cross-sectional study.

PubMed

Nigatu, Digafe Tsegaye; Seme, Asefa; Fituma, Shewaye; Segni, Mesfin Tafa

2018-05-30

For physiological as well as behavioral reasons, sexual debut increases young individuals' risk for infection with sexually transmitted infection including HIV. It is fundamental to recognize the factors related to sexual debut in a broader context for designing and implementing effective interventions targeting youth. Community-based cross-sectional study was employed from January to May, 2013 among females of Ambo town. A multistage sampling technique was applied. The participants were selected using simple random sampling technique. Face to face interview using structured and pretested questionnaires were used to collect thedata from the study participants. Bivariate and multivariate logistic regression analysis was used to determine the predictors of sexual initiation. Three hundred seventeen (49.9%) of the respondents have ever had sex. The mean age at first sexual initiation was 16.6 (SD ±2.3) years. Being in age group 20-24 [Adjusted Odds Ratio (AOR) & (95% CI) = 2.75 (1.74, 4.34)], Educational level [AOR& (95% CI) = 0.20 (0.08, 0.48)], being in school [AOR& (95% CI) = 0.19 (0.11, 0.33)], having paid job [AOR& (95% CI) = 2.20 (1.19, 4.07)], peer pressure [AOR& (95% CI) = 3.20 (2.08, 4.94)], alcohol consumption [AOR& (95% CI) = 2.17 (1.43, 3.28)], and pornographic materials [AOR& (95% CI) = 2.27 (1.43, 3.61)] had significant association with sexual initiation. Substantial numbers of females had started sexual activity that might expose them to different reproductive health problems. In general age group, peer pressure, alcohol consumption and watching pornographic materials were found to be predictors for the sexual debut. Therefore, building life skills, establishing youth friendly clubs should be intensified.

Inhomogeneity compensation for MR brain image segmentation using a multi-stage FCM-based approach.

PubMed

Szilágyi, László; Szilágyi, Sándor M; Dávid, László; Benyó, Zoltán

2008-01-01

Intensity inhomogeneity or intensity non-uniformity (INU) is an undesired phenomenon that represents the main obstacle for MR image segmentation and registration methods. Various techniques have been proposed to eliminate or compensate the INU, most of which are embedded into clustering algorithms. This paper proposes a multiple stage fuzzy c-means (FCM) based algorithm for the estimation and compensation of the slowly varying additive or multiplicative noise, supported by a pre-filtering technique for Gaussian and impulse noise elimination. The slowly varying behavior of the bias or gain field is assured by a smoothening filter that performs a context dependent averaging, based on a morphological criterion. The experiments using 2-D synthetic phantoms and real MR images show, that the proposed method provides accurate segmentation. The produced segmentation and fuzzy membership values can serve as excellent support for 3-D registration and segmentation techniques.

Factorial versus multi-arm multi-stage designs for clinical trials with multiple treatments.

PubMed

Jaki, Thomas; Vasileiou, Despina

2017-02-20

When several treatments are available for evaluation in a clinical trial, different design options are available. We compare multi-arm multi-stage with factorial designs, and in particular, we will consider a 2 × 2 factorial design, where groups of patients will either take treatments A, B, both or neither. We investigate the performance and characteristics of both types of designs under different scenarios and compare them using both theory and simulations. For the factorial designs, we construct appropriate test statistics to test the hypothesis of no treatment effect against the control group with overall control of the type I error. We study the effect of the choice of the allocation ratios on the critical value and sample size requirements for a target power. We also study how the possibility of an interaction between the two treatments A and B affects type I and type II errors when testing for significance of each of the treatment effects. We present both simulation results and a case study on an osteoarthritis clinical trial. We discover that in an optimal factorial design in terms of minimising the associated critical value, the corresponding allocation ratios differ substantially to those of a balanced design. We also find evidence of potentially big losses in power in factorial designs for moderate deviations from the study design assumptions and little gain compared with multi-arm multi-stage designs when the assumptions hold. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.

Computer Program for Analysis, Design and Optimization of Propulsion, Dynamics, and Kinematics of Multistage Rockets

NASA Astrophysics Data System (ADS)

Lali, Mehdi

2009-03-01

A comprehensive computer program is designed in MATLAB to analyze, design and optimize the propulsion, dynamics, thermodynamics, and kinematics of any serial multi-staging rocket for a set of given data. The program is quite user-friendly. It comprises two main sections: "analysis and design" and "optimization." Each section has a GUI (Graphical User Interface) in which the rocket's data are entered by the user and by which the program is run. The first section analyzes the performance of the rocket that is previously devised by the user. Numerous plots and subplots are provided to display the performance of the rocket. The second section of the program finds the "optimum trajectory" via billions of iterations and computations which are done through sophisticated algorithms using numerical methods and incremental integrations. Innovative techniques are applied to calculate the optimal parameters for the engine and designing the "optimal pitch program." This computer program is stand-alone in such a way that it calculates almost every design parameter in regards to rocket propulsion and dynamics. It is meant to be used for actual launch operations as well as educational and research purposes.

Off-design Performance Analysis of Multi-Stage Transonic Axial Compressors

NASA Astrophysics Data System (ADS)

Du, W. H.; Wu, H.; Zhang, L.

Because of the complex flow fields and component interaction in modern gas turbine engines, they require extensive experiment to validate performance and stability. The experiment process can become expensive and complex. Modeling and simulation of gas turbine engines are way to reduce experiment costs, provide fidelity and enhance the quality of essential experiment. The flow field of a transonic compressor contains all the flow aspects, which are difficult to present-boundary layer transition and separation, shock-boundary layer interactions, and large flow unsteadiness. Accurate transonic axial compressor off-design performance prediction is especially difficult, due in large part to three-dimensional blade design and the resulting flow field. Although recent advancements in computer capacity have brought computational fluid dynamics to forefront of turbomachinery design and analysis, the grid and turbulence model still limit Reynolds-average Navier-Stokes (RANS) approximations in the multi-stage transonic axial compressor flow field. Streamline curvature methods are still the dominant numerical approach as an important tool for turbomachinery to analyze and design, and it is generally accepted that streamline curvature solution techniques will provide satisfactory flow prediction as long as the losses, deviation and blockage are accurately predicted.

Design of Multistage Axial-Flow Compressors

NASA Technical Reports Server (NTRS)

Crouse, J. E.; Gorrell, W. T.

1983-01-01

Program developed for computing aerodynamic design of multistage axialflow compressor and associated blading geometry input for internal flow analysis. Aerodynamic solution gives velocity diagrams on selected streamlines of revolution at blade row edges. Program written in FORTRAN IV.

The influence of the "cage" effect on the mechanism of reversible bimolecular multistage chemical reactions proceeding from different sites in solutions.

PubMed

Doktorov, Alexander B

2016-08-28

Manifestations of the "cage" effect at the encounters of reactants have been theoretically treated on the example of multistage reactions (including bimolecular exchange reactions as elementary stages) proceeding from different active sites in liquid solutions. It is shown that for reactions occurring near the contact of reactants, consistent consideration of quasi-stationary kinetics of such multistage reactions (possible in the framework of the encounter theory only) can be made on the basis of chemical concepts of the "cage complex," just as in the case of one-site model described in the literature. Exactly as in the one-site model, the presence of the "cage" effect gives rise to new channels of reactant transformation that cannot result from elementary event of chemical conversion for the given reaction mechanism. Besides, the multisite model demonstrates new (as compared to one-site model) features of multistage reaction course.

An Analysis of the Impact of the Research Utilization Project on Principals' Attitudes and on the Use of Information Services By Teachers and Other Field Personnel in 16 Target Elementary Schools of the District of Columbia.

ERIC Educational Resources Information Center

Robinson, Erika L.

Bridging the gap between the research resources and field personnel becomes an increasingly important problem. This study investigated the impact of the Research Utilization Project (RUP) on public elementary schools in the District of Columbia. In the 16 schools selected by a multistage stratified sampling method, the total number of information…

Multi-stage Mass Spectrometry of Poly(vinyl pyrrolidone) and Its Vinyl Succinimide Copolymer Formed upon Exposure to Sodium Hypochlorite

PubMed Central

Fouquet, Thierry; Torimura, Masaki; Sato, Hiroaki

2016-01-01

The degradation routes of poly(vinyl pyrrolidone) (PVP) exposed to sodium hypochlorite (bleach) have been previously investigated using chemical analyses such as infrared spectroscopy. So far, no reports have proposed mass spectrometry (MS) as an alternative tool despite its capability to provide molecular and structural information using its single stage electrospray (ESI) or matrix assisted laser desorption ionization (MALDI) and multi stage (MSn) configurations, respectively. The present study thus reports on the characterization of PVP after its exposure to bleach by high resolution MALDI spiralTOF-MS and Kendrick mass defect analysis providing clues as to the formation of a vinyl pyrrolidone/vinyl succinimide copolymeric degradation product. A thorough investigation of the fragmentation pathways of PVP adducted with sodium and proton allows one main route to be described—namely the release of the pyrrolidone pendant group in a charge remote and charge driven mechanism, respectively. Extrapolating this fragmentation pathway, the oxidation of vinyl pyrrolidone into vinyl succinimide hypothesized from the single stage MS is validated by the detection of an alternative succinimide neutral loss in lieu of the pyrrolidone release in the ESI-MSn spectra of the aged PVP sample. It constitutes an example of application of multi-stage mass spectrometry for the characterization of the degradation of polymeric samples at a molecular level. PMID:27800293

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spitz, A.H.; Boynton, W.V.

Six ureilites (ALHA77257, ALHA81101, ALH82130, PCA82506, Kanna, and Novo Urei) were analyzed using neutron activation analysis for Ca, Sc, Cr, Mn, Fe, Co, Ni, Zn, Ga, REE, W, Re, Os, Ir, and Au. The authors examined bulk samples as well as acid-treated samples. In bulk samples the refractory siderophiles' concentrations range from approximately 0.1 to 1.0 times CI chondrites while the volatile siderophiles' concentrations range from approximately 0.1 to 1.0 times CI chondrites while the volatile siderophiles range from about 0.07 to 0.3 times CI chondrites. Rare earth elements (REEs) in ureilites are quite depleted and display light and heavymore » rare earth enrichments. The Antarctic meteorites display either much less pronounced v-shaped patterns or no enrichment in the light rare earths at all. In terms of the new trace-element results, ureilites do not fall into the coherent groups that other workers have defined by chemical or petrographic characteristics. Trace elements do provide additional constraints on the models for the petrogenesis of ureilites. In particular, the siderophile element abundances call for simplified models of chemical processing rather than the complex, multistage processing called for in silicate fractionation models. REE concentrations, on the other hand, imply multistage processing to produce the ureilites. None of the ureilite petrogenesis models extant account for the trace element data. These new data and the considerations of them with respect to the proposed ureilite petrogenesis models indicate that the direction of modeling should be toward contemplation of mixtures and how the components the authors observe in ureilites behave under such conditions.« less

Attitudes Toward Domestic Violence and Corporal Punishment Among Former Soviet Union Immigrants in Israel.

PubMed

Enosh, Guy; Leshem, Elazar; Buchbinder, Eli

2016-10-01

The study regards attitudes of Russian immigrants in Israel toward wife abuse and corporal punishment. The sample consisted of 1,028 participants, based on a multistage cluster sampling. The study used a questionnaire related to immigration, acculturation, and attitudinal issues. The findings indicate a dual-causal model, in which corporal punishment attitudes contribute to wife abuse attitudes and vice versa. However, the effect of attitudes supporting corporal punishment was stronger than the effect of wife abuse attitudes, indicating that the attitudinal system as a precursor of violent behavior is already merging the two types of violence. © The Author(s) 2016.

Predicting Factors for Retailers' Sale of Cigarettes to Adolescents in the Lower Part of Northern Region of Thailand.

PubMed

Phetphum, Chakkraphan; Wangwonsin, Artittaya; Noosorn, Narongsak

2017-08-14

Thailand is one of the members of WHO FCTC and has paid so much attention to preventing adolescents' access to tobacco. However, Thai adolescents still have access to tobacco with ease. The aim of this research was to investigate the predicting factors for the cigarettes sale to adolescents by the retailers in Thailand. A cross-sectional study. This cross sectional survey was conducted after a careful desk review of the relevant literature. Multistage random sampling technique was used to sample the survey participants (n = 675) who were retailers of tobacco in the lower northern region of Thailand. Data were collected by validated questionnaires and analyzed by descriptive analytic, chi-square test and binary logistic regression. More than half (58.7%) of the participants sell cigarettes to adolescents. Factors such as open display of cigarette at the point of sale, selling cigarettes in sticks, selling cigarettes by self-service, and reluctant disregard of buyers' age by the seller significantly correlated with and predicted, at 95% level of confidence, the behavior of retailers selling cigarettes to adolescents. Thai adolescent's access to tobacco continues to be a serious public health problem. Therefore, the Ministry of Public Health and other relevant stakeholders saddled with the responsibility of interventions to scale up measures that would reinforce the law of Tobacco Control Act.

Risk of disordered eating attitudes among adolescents in seven Arab countries by gender and obesity: a cross-cultural study.

PubMed

Musaiger, Abdulrahman O; Al-Mannai, Mariam; Tayyem, Reema; Al-Lalla, Osama; Ali, Essa Y A; Kalam, Faiza; Benhamed, Mofida M; Saghir, Sabri; Halahleh, Ismail; Djoudi, Zahra; Chirane, Manel

2013-01-01

The objectives were to discover the prevalence of disordered eating attitudes (EAs) among adolescent males and females, and the association of obesity with EA in seven Arab countries. A multistage stratified sampling technique was used to select secondary students aged 15-18 years from cities in Algeria, Jordan, Kuwait, Libya, Palestine, Syria and Sharijah Emirate (United Arab Emirates). The total sample was 4698 (2240 males and 2458 females). The Eating Attitudes Test (EAT-26) was used to measure those at risk of disordered EA. Obesity was calculated according to the International Obesity Taskforce criteria. Participants were grouped into two categories, non-obese and obese (overweight and obese). The risk of disordered EA was twice as high among females as in males in Jordan, Libya, Palestine and Syria. Kuwaiti adolescents (males and females) showed higher prevalence of disordered EA than their counterparts in other countries. The risk of disordered EA among obese adolescents was two to three times higher than that of non-obese adolescents, in both genders. Excepting Kuwaiti females and Palestinian males. The association of obesity with disordered EA was statistically significant. This study highlighted the magnitude of the risk of disordered eating attitudes among both male and female adolescents in Arab countries and identified the need for programmes to prevent and control these disorders in the Arab region. Copyright © 2012 Elsevier Ltd. All rights reserved.

Seroprevalence of Hepatitis B Infection in Nigeria: A National Survey

PubMed Central

Olayinka, Adebola T.; Oyemakinde, Akin; Balogun, Muhammad S.; Ajudua, Anthonia; Nguku, Patrick; Aderinola, Moses; Egwuenu-Oladejo, Abiodun; Ajisegiri, Simeon W.; Sha'aibu, Samuel; Musa, Bolanle O. P.; Gidado, Saheed; Nasidi, Abdulsalami

2016-01-01

Hepatitis B virus (HBV) infection accounts for about 1 million deaths worldwide annually. This study was to determine the prevalence, distribution of HBV, and factors associated with infection in an apparently healthy population in Nigeria. A cross-sectional study among the general population was conducted employing a multistage sampling technique. Data on demographic, social, and behavioral indicators were collected using questionnaires and blood samples tested for HBV seromarkers. Descriptive, bivariate, and multivariate analyses were done. Prevalence of hepatitis B infection was 12.2% (confidence interval [CI] = 10.3–14.5). Of the participants, more than half, 527 (54.6%), had evidence of previous exposure to HBV, while 306 (31.7%) showed no serologic evidence of infection or vaccination. Only 76 (7.9%) participants showed serologic evidence of immunity to HBV through vaccination. Factors associated with testing positive for HBV infection were dental procedure outside the health facility (odds ratios [OR] = 3.4, 95% CI = 1.52–7.70), local circumcision (OR = 1.73, 95% CI = 1.17–2.57), and uvulectomy (OR = 1.65, 95% = 1.06–2.57). With logistic regression, only dental procedure outside the health facility (adjusted OR = 3.32, 95% CI = 1.38–7.97) remained significant. This first national survey on seroprevalence of hepatitis B describes the epidemiology and high prevalence of HBV infection in Nigeria and highlights the need for improved vaccination against HBV. PMID:27527630

Do adolescents support early marriage in Bangladesh? Evidence from study.

PubMed

Rahman, M M; Kabir, M

2005-01-01

Adolescence is a critical period for female adolescents as they have to make decisions regarding their marriage, education and work which would influence and determine their future course of life. Although, early marriage has negative consequences, still a proportion of female adolescents favour early marriage because of prevailing cultural norms. This paper attempts to investigate the factors influencing the adolescents' attitude towards early marriage among the married and unmarried female adolescents. This is a quantitative and qualitative study. A multistage cluster sampling technique was used to select the sample. For quantitative results, data on 3362 female adolescents from rural and urban areas irrespective of their marital status were analyzed. To supplement the results found in quantitative analysis, a series of focus group discussions were conducted among the adolescents. Analysis revealed that one fourth (25.9%) of the adolescents were in favour of early marriage. A number of societal factors influenced them towards early marriage, despite the fact that adolescents are aware of the consequences of maternal and child health. Multivariate logistic regression analysis showed that current marital status, years of schooling, work status and parental marital decision are important predictors of early marriage (p < 0.05). The study concluded that female education would be an important determinant of adolescent marriage. Therefore, opportunities and scope of education beyond secondary would helps to bring change in the attitude towards early marriage.

Prevalence and pattern of bacteria and intestinal parasites among food handlers in the Federal Capital Territory of Nigeria

PubMed Central

Ifeadike, C. O.; Ironkwe, O. C.; Adogu, P. O. U.; Nnebue, C. C.; Emelumadu, O. F.; Nwabueze, S. A.; Ubajaka, C. F.

2012-01-01

Background: In developing countries, biological contaminants largely bacteria and other parasites constitute the major causes of food-borne diseases often transmitted through food, water, nails, and fingers contaminated with faeces. Accordingly, food-handlers with poor personal hygiene could be potential sources of infections by these micro-organisms. Objective: This study was aimed at determining the prevalence and pattern of bacteria and intestinal parasites among food handlers in the Federal Capital Territory. Materials and Methods: The study was a descriptive one in which a multistage sampling technique was employed to select 168 food handlers of various types. Subjects’ stool, urine, and fingernail analyses were carried out and the result scientifically scrutinized. Results: Fingernail bacteria isolates include: E. Coli (1.8%), coagulase-negative staphylococcus (17.9%), Staphylococcus aureus(7.1%), Klebsiella species (2.4%), Serratia species (1.2%), Citrobacter species (1.2%), and Enterococcus species (1.8%). The subjects’ stool samples tested positive: For A. lumbricoides (14.9%), T. trichuria (1.8%), S. starcolaris (3.0%), E. histolytica (10.7%), G. lambilia (1.8%), S. mansoni (1.2%), and Taenia species (4.8%). Furthermore, 42.3% and 15.5% of the stool specimen tested positive for Salmonella and Shigella species, respectively. Conclusion: Food establishments should screen and treat staff with active illness, and regularly train them on good personal and workplace hygiene practices. PMID:23293419

Sex differences in obesity, dietary habits, and physical activity among urban middle-class Bangladeshis

PubMed Central

Saquib, Juliann; Saquib, Nazmus; Stefanick, Marcia L.; Khanam, Masuma Akter; Anand, Shuchi; Rahman, Mahbubur; Chertow, Glenn M.; Barry, Michele; Ahmed, Tahmeed; Cullen, Mark R.

2016-01-01

Background The sustained economic growth in Bangladesh during the previous decade has created a substantial middle-class population, who have adequate income to spend on food, clothing, and lifestyle management. Along with the improvements in living standards, has also come negative impact on health for the middle class. The study objective was to assess sex differences in obesity prevalence, diet, and physical activity among urban middle-class Bangladeshi. Methods In this cross-sectional study, conducted in 2012, we randomly selected 402 adults from Mohammedpur, Dhaka. The sampling technique was multi-stage random sampling. We used standardized questionnaires for data collection and measured height, weight, and waist circumference. Results Mean age (standard deviation) was 49.4 (12.7) years. The prevalence of both generalized (79% vs. 53%) and central obesity (85% vs. 42%) were significantly higher in women than men. Women reported spending more time watching TV and spending less time walking than men (p<.05); however, men reported a higher intake of unhealthy foods such as fast food and soft drinks. Conclusions We conclude that the prevalence of obesity is significantly higher in urban middle-class Bangladeshis than previous urban estimates, and the burden of obesity disproportionately affects women. Future research and public health efforts are needed to address this severe obesity problem and to promote active lifestyles. PMID:27610059

Exploring breast cancer preventive lifestyle and social support of Iranian women: a study protocol for a mixed-methods approach.

PubMed

Khazaee-Pool, Maryam; Pashaei, Tahereh; Jahangiry, Leila; Ponnet, Koen; Gholami, Ali

2017-06-07

It is widely accepted that a healthy lifestyle may decrease the probability of developing cancer. This study aimed to describe a study protocol that makes it possible to explore preventive health lifestyles of Iranian women and their received social support for the purpose of developing cultural strategies to increase breast cancer prevention. A mixed-methods study will be accomplished in two sequential parts. First, a cross-sectional study will be conducted in which 2,250 Iranian women are recruited by using a random multistage cluster sampling of 20 health care centers. Structured face-to-face interviews will be conducted to obtain information on the participants' health lifestyle and perceived social support. Data will be analyzed using both multivariate regression and structural equation modeling techniques. Then, a qualitative study will be conducted among employed women using a purposive sampling design. Data will be collected by means of focus groups and semi-structured interviews and will be analyzed using a conventional content analysis approach. The results of the quantitative and qualitative study will be used to develop breast cancer preventive strategies. Researchers need to acquire knowledge regarding the lifestyle and perceived social support of Iranian women that will foster culturally competent approaches to promote healthy lifestyles to develop breast cancer preventive strategies. Examining breast cancer preventive lifestyles provides valuable information for designing applicable intervention programs for improving women's health.

Determination of fucoxanthin isomers in microalgae (Isochrysis sp.) by high-performance liquid chromatography coupled with diode-array detector multistage mass spectrometry coupled with positive electrospray ionization.

PubMed

Crupi, Pasquale; Toci, Aline Theodore; Mangini, Silvio; Wrubl, Federico; Rodolfi, Liliana; Tredici, Mario R; Coletta, Antonio; Antonacci, Donato

2013-05-15

Due to their health benefits, there is growing interest in the production and use of carotenoids from natural sources, e.g. microalgae. To date, only Haematococcus pluvialis and Dunaliella, that accumulate, respectively, astaxanthin and β-carotene in large quantities, are grown commercially. However, interest is also being focused on other xanthophylls, such as (all-E)-fucoxanthin characterized by anti-obesity and anti-carcinogenic effects. In this regard, rigorous chemical and analytical techniques following preparative isolation of components are needed to unequivocally identify individual carotenoids in microalgae. The carotenoid profile of Isochrysis sp. biomass, produced in closed photobioreactors, was determined by reversed-phase C30 (RP-30) high-performance liquid chromatography coupled with diode-array detector mass spectrometry using positive electrospray ionization (HPLC/DAD-MS/ESI(+) ) analysis. Additionally, multistage mass spectrometry (MS(n) ) analyses, together with fine structures of the UV-vis spectra, were used to differentiate structural and geometrical isomers. This technique allowed the simultaneous determination of geometrical, isomers of fucoxanthin (all-E-fucoxanthin, 13Z-, 13'Z- and 9'Z-fucoxanthin), diatoxanthin and 5,8-epoxydiadinoxanthin diasteroisomers (R/S). The analyzed extracts contained fucoxanthin isomers as the major carotenoids and, in particular, (all-E)-fucoxanthin was the main geometrical isomer (~85%) found at a concentration of 17 mg/g of the lyophilized biomass. Considering the high content of fucoxanthin in Isochrysis sp. biomass, the microalga could be proposed as a source of this compound for nutraceutical and pharmaceutical applications. Copyright © 2013 John Wiley & Sons, Ltd.

Spatial dynamics of large-scale, multistage crab (Callinectes sapidus) dispersal: Determinants and consequences for recruitment

USGS Publications Warehouse

Etherington, L.L.; Eggleston, D.B.

2003-01-01

We assessed determinants and consequences of multistage dispersal on spatial recruitment of the blue crab, Callinectes sapidus, within the Croatan, Albemarle, Pamlico Estuarine System (CAPES), North Carolina, U.S.A. Large-scale sampling of early juvenile crabs over 4 years indicated that spatial abundance patterns were size-dependent and resulted from primary post-larval dispersal (pre-settlement) and secondary juvenile dispersal (early post-settlement). In general, primary dispersal led to high abundances within more seaward habitats, whereas secondary dispersal (which was relatively consistent) expanded the distribution of juveniles, potentially increasing the estuarine nursery capacity. There were strong relationships between juvenile crab density and specific wind characteristics; however, these patterns were spatially explicit. Various physical processes (e.g., seasonal wind events, timing and magnitude of tropical cyclones) interacted to influence dispersal during multiple stages and determined crab recruitment patterns. Our results suggest that the nursery value of different habitats is highly dependent on the dispersal potential (primary and secondary dispersal) to and from these areas, which is largely determined by the relative position of habitats within the estuarine landscape.

Removal of CO2 in a multistage fluidized bed reactor by diethanol amine impregnated activated carbon.

PubMed

Das, Dipa; Samal, Debi Prasad; Meikap, Bhim C

2016-07-28

To mitigate the emission of carbon dioxide (CO2), we have developed and designed a four-stage fluidized bed reactor. There is a counter current exchange between solid adsorbent and gas flow. In this present investigation diethanol amine (DEA) impregnated activated carbon made from green coconut shell was used as adsorbent. This type of adsorbent not only adsorbs CO2 due to the presence of pore but also chemically reacts with CO2 and form secondary zwitterions. Sampling and analysis of CO2 was performed using Orsat apparatus. The effect of initial CO2 concentration, gas velocity, solid rate, weir height etc. on removal efficiency of CO2 have been investigated and presented. The percentage removal of CO2 has been found close to 80% under low gas flow rate (0.188 m/s), high solid flow rate (4.12 kg/h) and weir height of 50 mm. From this result it has been found out that multistage fluidized bed reactor may be a suitable equipment for removal of CO2 from flue gas.

Mars integrated transportation system multistage Mars mission

NASA Technical Reports Server (NTRS)

1991-01-01

In accordance with the objective of the Mars Integrated Transport System (MITS) program, the Multistage Mars Mission (MSMM) design team developed a profile for a manned mission to Mars. The purpose of the multistage mission is to send a crew of five astronauts to the martian surface by the year 2019. The mission continues man's eternal quest for exploration of new frontiers. This mission has a scheduled duration of 426 days that includes experimentation en route as well as surface exploration and experimentation. The MSMM is also designed as a foundation for a continuing program leading to the colonization of the planet Mars.

[Advances in studies on multi-stage countercurrent extraction technology in traditional Chinese medicine].

PubMed

Xie, Zhi-Peng; Liu, Xue-Song; Chen, Yong; Cai, Ming; Qu, Hai-Bin; Cheng, Yi-Yu

2007-05-01

Multi-stage countercurrent extraction technology, integrating solvent extraction, repercolation with dynamic and countercurrent extraction, is a novel extraction technology for the traditional Chinese medicine. This solvent-saving, energy-saving and high-extraction-efficiency technology can at the most drive active compounds to diffuse from the herbal materials into the solvent stage by stage by creating concentration differences between the herbal materials and the solvents. This paper reviewed the basic principle, the influence factors and the research progress and trends of the equipments and the application of the multi-stage countercurrent extraction.

Full 3D Analysis of the GE90 Turbofan Primary Flowpath

NASA Technical Reports Server (NTRS)

Turner, Mark G.

2000-01-01

The multistage simulations of the GE90 turbofan primary flowpath components have been performed. The multistage CFD code, APNASA, has been used to analyze the fan, fan OGV and booster, the 10-stage high-pressure compressor and the entire turbine system of the GE90 turbofan engine. The code has two levels of parallel, and for the 18 blade row full turbine simulation has 87.3 percent parallel efficiency with 121 processors on an SGI ORIGIN. Grid generation is accomplished with the multistage Average Passage Grid Generator, APG. Results for each component are shown which compare favorably with test data.

Particle swarm optimization of ascent trajectories of multistage launch vehicles

NASA Astrophysics Data System (ADS)

Pontani, Mauro

2014-02-01

Multistage launch vehicles are commonly employed to place spacecraft and satellites in their operational orbits. If the rocket characteristics are specified, the optimization of its ascending trajectory consists of determining the optimal control law that leads to maximizing the final mass at orbit injection. The numerical solution of a similar problem is not trivial and has been pursued with different methods, for decades. This paper is concerned with an original approach based on the joint use of swarming theory and the necessary conditions for optimality. The particle swarm optimization technique represents a heuristic population-based optimization method inspired by the natural motion of bird flocks. Each individual (or particle) that composes the swarm corresponds to a solution of the problem and is associated with a position and a velocity vector. The formula for velocity updating is the core of the method and is composed of three terms with stochastic weights. As a result, the population migrates toward different regions of the search space taking advantage of the mechanism of information sharing that affects the overall swarm dynamics. At the end of the process the best particle is selected and corresponds to the optimal solution to the problem of interest. In this work the three-dimensional trajectory of the multistage rocket is assumed to be composed of four arcs: (i) first stage propulsion, (ii) second stage propulsion, (iii) coast arc (after release of the second stage), and (iv) third stage propulsion. The Euler-Lagrange equations and the Pontryagin minimum principle, in conjunction with the Weierstrass-Erdmann corner conditions, are employed to express the thrust angles as functions of the adjoint variables conjugate to the dynamics equations. The use of these analytical conditions coming from the calculus of variations leads to obtaining the overall rocket dynamics as a function of seven parameters only, namely the unknown values of the initial state and costate components, the coast duration, and the upper stage thrust duration. In addition, a simple approach is introduced and successfully applied with the purpose of satisfying exactly the path constraint related to the maximum dynamical pressure in the atmospheric phase. The basic version of the swarming technique, which is used in this research, is extremely simple and easy to program. Nevertheless, the algorithm proves to be capable of yielding the optimal rocket trajectory with a very satisfactory numerical accuracy.

Spatial Control of Functional Response in 4D-Printed Active Metallic Structures

PubMed Central

Ma, Ji; Franco, Brian; Tapia, Gustavo; Karayagiz, Kubra; Johnson, Luke; Liu, Jun; Arroyave, Raymundo; Karaman, Ibrahim; Elwany, Alaa

2017-01-01

We demonstrate a method to achieve local control of 3-dimensional thermal history in a metallic alloy, which resulted in designed spatial variations in its functional response. A nickel-titanium shape memory alloy part was created with multiple shape-recovery stages activated at different temperatures using the selective laser melting technique. The multi-stage transformation originates from differences in thermal history, and thus the precipitate structure, at various locations created from controlled variations in the hatch distance within the same part. This is a first example of precision location-dependent control of thermal history in alloys beyond the surface, and utilizes additive manufacturing techniques as a tool to create materials with novel functional response that is difficult to achieve through conventional methods. PMID:28429796

Multi-stage separations based on dielectrophoresis

DOEpatents

Mariella, Jr., Raymond P.

2004-07-13

A system utilizing multi-stage traps based on dielectrophoresis. Traps with electrodes arranged transverse to the flow and traps with electrodes arranged parallel to the flow with combinations of direct current and alternating voltage are used to trap, concentrate, separate, and/or purify target particles.

SOX OUT ON A LIMB (LIMESTONE INJECTION MULTISTAGE BURNER)

EPA Science Inventory

The paper describes the most recent results from the Limestone Injection Multistage Burner (LIMB) program, covering results from the wall-fired demonstration. Tests were conducted to determine the efficacy of commercial calcium hydroxide (Ca(OH)2) and of calcium-lignosulfonate-mo...

DEVELOPMENTS IN LIMB (LIMESTONE INJECTION MULTISTAGE BURNER) TECHNOLOGY

EPA Science Inventory

The paper describes the most recent results from the Limestone Injection Multistage Burner (LIMB) program, results from the wall-fired demonstration. Tests were conducted to determine the efficacy of commercial calcium hydroxide--Ca(OH)2--supplied by Marblehead Lime Co. and of ca...

Multi-stage responsive 4D printed smart structure through varying geometric thickness of shape memory polymer

NASA Astrophysics Data System (ADS)

Teoh, Joanne Ee Mei; Zhao, Yue; An, Jia; Chua, Chee Kai; Liu, Yong

2017-12-01

Shape memory polymers (SMPs) have gained a presence in additive manufacturing due to their role in 4D printing. They can be printed either in multi-materials for multi-stage shape recovery or in a single material for single-stage shape recovery. When printed in multi-materials, material or material-based design is used as a controlling factor for multi-stage shape recovery. However, when printed in a single material, it is difficult to design multi-stage shape recovery due to the lack of a controlling factor. In this research, we explore the use of geometric thickness as a controlling factor to design smart structures possessing multi-stage shape recovery using a single SMP. L-shaped hinges with a thickness ranging from 0.3-2 mm were designed and printed in four different SMPs. The effect of thickness on SMP’s response time was examined via both experiment and finite element analysis using Ansys transient thermal simulation. A method was developed to accurately measure the response time in millisecond resolution. Temperature distribution and heat transfer in specimens during thermal activation were also simulated and discussed. Finally, a spiral square and an artificial flower consisting of a single SMP were designed and printed with appropriate thickness variation for the demonstration of a controlled multi-stage shape recovery. Experimental results indicated that smart structures printed using single material with controlled thickness parameters are able to achieve controlled shape recovery characteristics similar to those printed with multiple materials and uniform geometric thickness. Hence, the geometric parameter can be used to increase the degree of freedom in designing future smart structures possessing complex shape recovery characteristics.

An evaluation of the utility of ERTS-1 data for mapping and developing natural resources of Iran

NASA Technical Reports Server (NTRS)

Ebtehadj, K. (Principal Investigator)

1973-01-01

The author has identified the following significant results. Significant results are reported in the creation of an Iranian photomosaic from ERTS-1 imagery; in tectonic and structural mapping and interpretation, including discovery of significant new fault patterns in Iran; in river and lake mapping; in wetlands and fisheries nursery delineation and mapping; in range and agricultural surveys and inventories using multi-stage sample methods; and in the computer analysis of ERTS-1 digital tapes for urban land use.

[New design of the Health Survey of Catalonia (Spain, 2010-2014): a step forward in health planning and evaluation].

PubMed

Alcañiz-Zanón, Manuela; Mompart-Penina, Anna; Guillén-Estany, Montserrat; Medina-Bustos, Antonia; Aragay-Barbany, Josep M; Brugulat-Guiteras, Pilar; Tresserras-Gaju, Ricard

2014-01-01

This article presents the genesis of the Health Survey of Catalonia (Spain, 2010-2014) with its semiannual subsamples and explains the basic characteristics of its multistage sampling design. In comparison with previous surveys, the organizational advantages of this new statistical operation include rapid data availability and the ability to continuously monitor the population. The main benefits are timeliness in the production of indicators and the possibility of introducing new topics through the supplemental questionnaire as a function of needs. Limitations consist of the complexity of the sample design and the lack of longitudinal follow-up of the sample. Suitable sampling weights for each specific subsample are necessary for any statistical analysis of micro-data. Accuracy in the analysis of territorial disaggregation or population subgroups increases if annual samples are accumulated. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

A false sense of security? Can tiered approach be trusted to accurately classify immunogenicity samples?

PubMed

Jaki, Thomas; Allacher, Peter; Horling, Frank

2016-09-05

Detecting and characterizing of anti-drug antibodies (ADA) against a protein therapeutic are crucially important to monitor the unwanted immune response. Usually a multi-tiered approach that initially rapidly screens for positive samples that are subsequently confirmed in a separate assay is employed for testing of patient samples for ADA activity. In this manuscript we evaluate the ability of different methods used to classify subject with screening and competition based confirmatory assays. We find that for the overall performance of the multi-stage process the method used for confirmation is most important where a t-test is best when differences are moderate to large. Moreover we find that, when differences between positive and negative samples are not sufficiently large, using a competition based confirmation step does yield poor classification of positive samples. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Permeability Evolution With Shearing of Simulated Faults in Unconventional Shale Reservoirs

NASA Astrophysics Data System (ADS)

Wu, W.; Gensterblum, Y.; Reece, J. S.; Zoback, M. D.

2016-12-01

Horizontal drilling and multi-stage hydraulic fracturing can lead to fault reactivation, a process thought to influence production from extremely low-permeability unconventional reservoir. A fundamental understanding of permeability changes with shear could be helpful for optimizing reservoir stimulation strategies. We examined the effects of confining pressure and frictional sliding on fault permeability in Eagle Ford shale samples. We performed shear-flow experiments in a triaxial apparatus on four shale samples: (1) clay-rich sample with sawcut fault, (2) calcite-rich sample with sawcut fault, (3) clay-rich sample with natural fault, and (4) calcite-rich sample with natural fault. We used pressure pulse-decay and steady-state flow techniques to measure fault permeability. Initial pore and confining pressures are set to 2.5 MPa and 5.0 MPa, respectively. To investigate the influence of confining pressure on fault permeability, we incrementally raised and lowered the confining pressure and measure permeability at different effective stresses. To examine the effect of frictional sliding on fault permeability, we slide the samples four times at a constant shear displacement rate of 0.043 mm/min for 10 minutes each and measure fault permeability before and after frictional sliding. We used a 3D Laser Scanner to image fault surface topography before and after the experiment. Our results show that frictional sliding can enhance fault permeability at low confining pressures (e.g., ≥5.0 MPa) and reduce fault permeability at high confining pressures (e.g., ≥7.5 MPa). The permeability of sawcut faults almost fully recovers when confining pressure returns to the initial value, and increases with sliding due to asperity damage and subsequent dilation at low confining pressures. In contrast, the permeability of natural faults does not fully recover. It initially increases with sliding, but then decreases with further sliding most likely due to fault gouge blocking fluid pathways.

Development of novel general equation for multistage epicyclic gearset with corrected teeth: non-constrained approach

NASA Astrophysics Data System (ADS)

Kijanka, Piotr; Jablonski, Adam; Dziedziech, Kajetan; Dworakowski, Ziemowit; Uhl, Tadeusz

2016-04-01

A large number of commercial systems for condition monitoring of most common planetary gearboxes used in wind turbines and mining machinery have been developed for years. However nowadays, multistage constructions are encountered in industries. These are not necessarily planetary, but generally epicyclic. Current state of the art, according to the authors knowledge, does not give general equations for a case where multistage systems are considered, where some of the gears consist all moving parts. Hence, currently available CMS systems are not suitable for condition monitoring of these kinds of systems. The paper presents a new general equation, which allows calculating the characteristic frequencies of any kind of multistage gear sets, as a result of theoretical investigation. Illustrated solution does not assume a fixed speed of any element. Moreover, presented equation takes into account corrected teeth, making developed equations most general from all available in tribology science. Presented scientific development is currently implemented in a modern European CMS.

On use of the multistage dose-response model for assessing laboratory animal carcinogenicity

PubMed Central

Nitcheva, Daniella; Piegorsch, Walter W.; West, R. Webster

2007-01-01

We explore how well a statistical multistage model describes dose-response patterns in laboratory animal carcinogenicity experiments from a large database of quantal response data. The data are collected from the U.S. EPA’s publicly available IRIS data warehouse and examined statistically to determine how often higher-order values in the multistage predictor yield significant improvements in explanatory power over lower-order values. Our results suggest that the addition of a second-order parameter to the model only improves the fit about 20% of the time, while adding even higher-order terms apparently does not contribute to the fit at all, at least with the study designs we captured in the IRIS database. Also included is an examination of statistical tests for assessing significance of higher-order terms in a multistage dose-response model. It is noted that bootstrap testing methodology appears to offer greater stability for performing the hypothesis tests than a more-common, but possibly unstable, “Wald” test. PMID:17490794

Influence of dispatching rules on average production lead time for multi-stage production systems.

PubMed

Hübl, Alexander; Jodlbauer, Herbert; Altendorfer, Klaus

2013-08-01

In this paper the influence of different dispatching rules on the average production lead time is investigated. Two theorems based on covariance between processing time and production lead time are formulated and proved theoretically. Theorem 1 links the average production lead time to the "processing time weighted production lead time" for the multi-stage production systems analytically. The influence of different dispatching rules on average lead time, which is well known from simulation and empirical studies, can be proved theoretically in Theorem 2 for a single stage production system. A simulation study is conducted to gain more insight into the influence of dispatching rules on average production lead time in a multi-stage production system. We find that the "processing time weighted average production lead time" for a multi-stage production system is not invariant of the applied dispatching rule and can be used as a dispatching rule independent indicator for single-stage production systems.

Multistage Polymeric Lens Structures Integrated into Silica Waveguides

NASA Astrophysics Data System (ADS)

Tate, Atsushi; Suzuki, Takanori; Tsuda, Hiroyuki

2006-08-01

A waveguide lens, composed of multistage polymer-filled thin grooves in a silica planar lightwave circuit (PLC) is proposed and a low-loss structure has been designed. A waveguide lens in a silica slab waveguide has been fabricated using reactive ion etching (RIE) and formed by filling with polymer. Both an imagding optical system and a Fourier-transform optical system can be configured in a PLC using a waveguide lens. It renders the PLC functional and its design flexible. To obtain a shorter focal length with a low insertion loss, it is more effective to use a multistage lens structure. An imaging optical system and a Fourier-transform optical system with a focal length of less than 1000 μm were fabricated in silica waveguides using a multistage lens structure. The lens imaging waveguides incorporate a 16-24-stage lens, with insertion losses of 4-7 dB. A 4 × 4 optical coupler, using a Fourier-transform optical system, utilizes a 6-stage lens with losses of 2-4 dB.

Multistage degradation modeling for BLDC motor based on Wiener process

NASA Astrophysics Data System (ADS)

Yuan, Qingyang; Li, Xiaogang; Gao, Yuankai

2018-05-01

Brushless DC motors are widely used, and their working temperatures, regarding as degradation processes, are nonlinear and multistage. It is necessary to establish a nonlinear degradation model. In this research, our study was based on accelerated degradation data of motors, which are their working temperatures. A multistage Wiener model was established by using the transition function to modify linear model. The normal weighted average filter (Gauss filter) was used to improve the results of estimation for the model parameters. Then, to maximize likelihood function for parameter estimation, we used numerical optimization method- the simplex method for cycle calculation. Finally, the modeling results show that the degradation mechanism changes during the degradation of the motor with high speed. The effectiveness and rationality of model are verified by comparison of the life distribution with widely used nonlinear Wiener model, as well as a comparison of QQ plots for residual. Finally, predictions for motor life are gained by life distributions in different times calculated by multistage model.

Activities of daily living, instrumental activities for daily living and predictors of functional capacity of older men in Jamaica

PubMed Central

Bourne, Paul Andrew

2009-01-01

Background: An extensive search of the literature found no studies that have examined functional capacity [Activities of Daily Living (ADL) and Instrumental Activities for Daily Living (I) ADL)] of Jamaican older men as well as factors that determine their functional capacity. Aims: The current study examines 1) ADL, 2) (I) ADL), 3) self-reported health status, 4) functional capacity, and 5) factors that determine functional capacity of older men. Methods and Method: Stratified multistage probability sampling technique was used to draw a sample of 2,000 55+ year men. A132-item questionnaire was used to collect the data. Descriptive statistics provide background information on the sample, cross tabulations were used to examine non-metric variables and logistic regression provides a model of predictors of functional capacity. Result: Fifty-five percent of sample indicated good current health status. Four percent was mostly satisfied with life; 21.7% had moderate dependence; 77.1% had high dependence (i.e. independence); 1.2% had low dependence; 21.9% were ages 75 years and older; 35.6% were ages 65 to 74 years and 42.6% reported ages 55 to 64 years. Functional capacity can be determined by church attendance (β=0.245; 95% CI: 0.264, 1.291); social support (β=0.129; 95% CI: 0.129, 0.258), area of residence (β=-0.060; 95% CI: -0.427, -0.061) and lastly by age of respondents. Conclusion: Ageing in explains deterioration in their (I) ADL, suggesting the challenges of ageing men's independence. More rural men were rarely satisfied with life; but more of them had a greater functional capacity than urban men. Depression was found to negatively relate to functional capacity, and church attendees had a greater functional status than non-attendees. PMID:22666693

[Spectral characteristics and implications of quartz from Heliao lead-zinc polymetallic ore district in the south of Qinzhou-Hangzhou joint belt].

PubMed

Lü, Wen-Chao; Yang, Zhi-Jun; Zhou, Yong-Zhang; Li, Hong-Zhong; Zeng, Xiang-Qing; Chen, Qing; Liang, Jin; Zeng, Chang-Yu

2013-05-01

The XRD, FTIR and Raman spectrum were employed to study the characters of quartz from three types of rock samples, which are mineralized rock sample, near ore body rock sample and far away from ore body rock sample in Heliao lead-zinc polymetallic ore district. The research shows that the quartz in the mineralized rock and far away from ore body rock is pure, while the quartz in near ore body rock contains a small amount of impurities. But such small amounts of impurities did not cause apparent change in the quartz lattice parameters. From far away from ore body rock-->near ore body rock-->mineralized rock, the crystallinity and order degree of quartz are higher and higher. And the quartz in the mineralized rock has a trend to change into low symmetry quartz. It's a unique to mineralized rock that the quartz's absorption peak at 1 050 cm(-1) was split into two strongest ones. It can be used as the signs of whether exists mineralization. The cause for the quartz microstructure changes may be related to the activities of late mineralized hydrothermal fluids. Late hydrothermal influence was very weak to the quartz far away from ore body rock. And through the impact of the multi-stage hydrothermal effect, the quartz in mineralized rock may be purified by recrystallization and structural adjustment. However the quartz in near ore body rock didn't have enough hydrothermal influence, so it's not pure. Genealogy research technology is a useful technique for in-depth exploration of study area mineralization process and metallogenic regularity.

A three dimensional multigrid multiblock multistage time stepping scheme for the Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Elmiligui, Alaa; Cannizzaro, Frank; Melson, N. D.

1991-01-01

A general multiblock method for the solution of the three-dimensional, unsteady, compressible, thin-layer Navier-Stokes equations has been developed. The convective and pressure terms are spatially discretized using Roe's flux differencing technique while the viscous terms are centrally differenced. An explicit Runge-Kutta method is used to advance the solution in time. Local time stepping, adaptive implicit residual smoothing, and the Full Approximation Storage (FAS) multigrid scheme are added to the explicit time stepping scheme to accelerate convergence to steady state. Results for three-dimensional test cases are presented and discussed.

Laboratory research of fracture geometry in multistage HFF in triaxial state

NASA Astrophysics Data System (ADS)

Bondarenko, T. M.; Hou, B.; Chen, M.; Yan, L.

2017-05-01

Multistage hydraulic fracturing of formation (HFF) in wells with horizontal completion is an efficientmethod for intensifying oil extraction which, as a rule, is used to develop nontraditional collectors. It is assumed that the complicated character of HFF fractures significantly influences the fracture geometry in the rock matrix. Numerous theoretical models proposed to predict the fracture geometry and the character of interaction of mechanical stresses in the multistage HFF have not been proved experimentally. In this paper, we present the results of laboratory modeling of the multistage HFF performed on a contemporary laboratory-scale plant in the triaxial stress state by using a gel-solution as the HFF agent. As a result of the experiment, a fracturing pattern was formed in the cubic specimen of the model material. The laboratory results showed that a nearly plane fracture is formed at the firstHFF stage, while a concave fracture is formed at the second HFF stage. The interaction of the stress fields created by the two principal HFF fractures results in the growth of secondary fractures whose directions turned out to be parallel to the modeled well bore. But this stress interference leads to a decrease in the width of the second principal fracture. It is was discovered that the penny-shaped fracture model is more appropriate for predicting the geometry of HFF fractures in horizontal wells than the two-dimensional models of fracture propagation (PKN model, KGD model). A computational experiment based on the boundary element method was carried out to obtain the qualitative description of the multistage HFF processes. As a result, a mechanical model of fracture propagation was constructed,which was used to obtain the mechanical stress field (the stress contrast) and the fracture opening angle distribution over fracture length and fracture orientation direction. The conclusions made in the laboratory modeling of the multistage HFF technology agree well with the conclusions made in the computational experiment. Special attention must be paid to the design of the HFF stage spacing density in the implementation of the multistage HFF in wells with horizontal completion.

Maisotsenko cycle applications in multi-stage ejector recycling module for chemical production

NASA Astrophysics Data System (ADS)

Levchenko, D. O.; Artyukhov, A. E.; Yurko, I. V.

2017-08-01

The article is devoted to the theoretical bases of multistage (multi-level) utilization modules as part of chemical plants (on the example of the technological line for obtaining nitrogen fertilizers). The possibility of recycling production waste (ammonia vapors, dust and substandard nitrogen fertilizers) using ejection devices and waste heat using Maisotsenko cycle technology (Maisotsenko heat and mass exchanger (HMX), Maisotsenko power cycles and recuperators, etc.) is substantiated. The principle of operation of studied recycling module and prospects for its implementation are presented. An improved technological scheme for obtaining granular fertilizers and granules with porous structure with multistage (multi-level) recycling module is proposed.

Multi-stage decoding of multi-level modulation codes

NASA Technical Reports Server (NTRS)

Lin, Shu; Kasami, Tadao; Costello, Daniel J., Jr.

1991-01-01

Various types of multi-stage decoding for multi-level modulation codes are investigated. It is shown that if the component codes of a multi-level modulation code and types of decoding at various stages are chosen properly, high spectral efficiency and large coding gain can be achieved with reduced decoding complexity. Particularly, it is shown that the difference in performance between the suboptimum multi-stage soft-decision maximum likelihood decoding of a modulation code and the single-stage optimum soft-decision decoding of the code is very small, only a fraction of dB loss in signal to noise ratio at a bit error rate (BER) of 10(exp -6).

Occupational injuries among building construction workers in Addis Ababa, Ethiopia.

PubMed

Tadesse, Sebsibe; Israel, Dagnachew

2016-01-01

Occupational injuries can pose direct costs, like suffering, loss of employment, disability and loss of productivity, and indirect costs on families and society. However, there is a dearth of studies clarifying the situation in most of Subsaharan African countries, like Ethiopia. The present study determined the prevalence of injury and associated factors among building construction employees in Addis Ababa, Ethiopia. An institutional-based cross-sectional study was conducted among building construction employees in Addis Ababa, Ethiopia from February to April 2015. Multi-stages sampling followed by simple random sampling techniques was used to select the study participants. The sample size of the study was 544. A pre-tested and structured questionnaire was used to collect data. Multivariable analyses were employed to see the effect of explanatory variables on injury. The prevalence of injury among building construction employees was reported to be 38.3 % [95 % CI: (33.9, 42.7)] in the past 1 year. Use of personal protective equipments, work experience, khat chewing were factors significantly associated with injury. This is among the few studies describing construction health and safety in Ethiopia. In this study a relatively higher prevalence of injury was reported among building construction employees compared to other studies. If urgent interventions are not in place, the absence from work, loss of productivity and work-related illnesses, disabilities and fatalities will continue to be a major challenge of the construction industry in the future. Therefore, programs to mitigate the burden borne by construction-related injuries should focus on areas, such as provision of safety trainings, promoting use of PPE and monitoring substance abuse in workplace.

Organizational commitment and intrinsic motivation of regular and contractual primary health care providers.

PubMed

Kumar, Pawan; Mehra, Anu; Inder, Deep; Sharma, Nandini

2016-01-01

Motivated and committed employees deliver better health care, which results in better outcomes and higher patient satisfaction. To assess the Organizational Commitment and Intrinsic Motivation of Primary Health Care Providers (HCPs) in New Delhi, India. Study was conducted in 2013 on a sample of 333 HCPs who were selected using multistage stage random sampling technique. The sample includes medical officers, auxiliary nurses and midwives, and pharmacists and laboratory technicians/assistants among regular and contractual staff. Data were collected using the pretested structured questionnaire for organization commitment (OC), job satisfiers, and intrinsic job motivation. Analysis was done by using SPSS version 18 and appropriate statistical tests were applied. The mean score for OC for entire regular staff is 1.6 ± 0.39 and contractual staff is 1.3 ± 0.45 which has statistically significant difference (t = 5.57; P = 0.00). In both regular and contractual staff, none of them show high emotional attachment with the organization and does not feel part of the family in the organization. Contractual staff does not feel proud to work in a present organization for rest of their career. Intrinsic motivation is high in both regular and contractual groups but intergroup difference is significant (t = 2.38; P < 0.05). Contractual staff has more dissatisfier than regular, and the difference is significant (P < 0.01). Organizational commitment and intrinsic motivation of contractual staff are lesser than the permanent staff. Appropriate changes are required in the predictors of organizational commitment and factors responsible for satisfaction in the organization to keep the contractual human resource motivated and committed to the organization.

Jakarta socio-cultural ecology: a sustainable architecture concept in urban neighbourhood

NASA Astrophysics Data System (ADS)

Wijaksono, Sigit; Sasmoko; Indrianti, Y.; Widhoyoko, SA

2017-12-01

As a metropolitan city with densely populated and fast residential development Jakarta should be able to implement a concept that is Jakarta socio-cultural ecology Architecture as the basis of settlement development. The concept of Jakarta socio-cultural ecology architecture is characterized by residential development capabilities that reflect and express the indigenous culture, the settlements built by linking the social and economic activities of the people of Jakarta and the settlements built by maintaining the building with the value of existing heritage. The objectives of this research are 1) to find a relevant construct to housing condition in Jakarta which then called Jakarta socio-cultural ecology, and 2) to see the tendency of complex condition of Jakarta socio-cultural ecology settlement. This research uses Neuroresearch method, which is one of mix-method research method as a mixture research method between qualitative research (exploration) and quantitative research method (explanatory and confirmatory). The population of research as well as unit analysis are all settlements in Jakarta. Sampling technique using probability sampling that is with multistage sampling. The results show that nowadays the Jakarta residential complex tends to lead to socio-cultural ecology and rather reflects and expresses the indigenous culture, the residential complex in Jakarta tends to form the building has been linked fully with the social and economic activities of Jakarta society but tends to occasionally maintain buildings with existing heritage values. This study also found that indigenous culture is a significant determinant of the formation of the condition of Jakarta socio-cultural ecology.

Titanium concentration in quartz as a record of multiple deformation mechanisms in an extensional shear zone

NASA Astrophysics Data System (ADS)

Nachlas, William O.; Whitney, Donna L.; Teyssier, Christian; Bagley, Brian; Mulch, Andreas

2014-04-01

Results of high precision analysis of Ti concentration ([Ti]) in quartz representing different recrystallization microstructures in a suite of progressively deformed quartzite mylonites show the effect of recrystallization on distribution of Ti in quartz. Petrographic observations and ion microprobe analysis reveals three texturally and geochemically distinct quartz microstructures in mylonites: (1) cores of recrystallized quartz ribbons preserve the highest [Ti] and are interpreted to have recrystallized via grain boundary migration recrystallization, (2) recrystallized rims and grain margins preserve a lower and more variable [Ti] and are interpreted to reflect the combined influence of subgrain rotation and bulging recrystallization, and (3) neocrystallized quartz precipitated in dilatancy sites has low (˜1 ppm) [Ti], reflecting the Ti content of the syndeformational fluid. Muscovite in nonmylonitic quartzite (at the base of the sampling traverse) is compositionally zoned, whereas muscovite in mylonitic quartzite shows a progressive decreasing in zoning in higher strain samples. Three-dimensional phase distribution mapping using X-ray computed tomography analysis of rock hand samples reveals that Ti-bearing accessory phases are less abundant and more dispersed in higher strained mylonites compared to nonmylonitic quartzite. This study demonstrates the influence of dynamic recrystallization on Ti substitution in quartz and evaluates the Ti buffering capacity of aqueous fluids (meteoric versus metamorphic/magmatic) as well as the distribution and reactivity of Ti-bearing accessory phases in a deforming quartzite. Results of this study suggest that Ti-in-quartz thermobarometry of deformed quartz is a sensitive technique for resolving the multistage history of quartz deformation and recrystallization in crustal shear zones.

Shock and vibration response of multistage structure

NASA Technical Reports Server (NTRS)

Lee, S. Y.; Liyeos, J. G.; Tang, S. S.

1968-01-01

Study of the shock and vibration response of a multistage structure employed analytically, lumped-mass, continuous-beam, multimode, and matrix-iteration methods. The study was made on the load paths, transmissibility, and attenuation properties along a longitudinal axis of a long, slender structure with increasing degree of complexity.

Automated Simultaneous Assembly for Multistage Testing

ERIC Educational Resources Information Center

Breithaupt, Krista; Ariel, Adelaide; Veldkamp, Bernard P.

2005-01-01

This article offers some solutions used in the assembly of the computerized Uniform Certified Public Accountancy (CPA) licensing examination as practical alternatives for operational programs producing large numbers of forms. The Uniform CPA examination was offered as an adaptive multistage test (MST) beginning in April of 2004. Examples of…

Microfiltration of thin stillage: Process simulation and economic analyses

USDA-ARS?s Scientific Manuscript database

In plant scale operations, multistage membrane systems have been adopted for cost minimization. We considered design optimization and operation of a continuous microfiltration (MF) system for the corn dry grind process. The objectives were to develop a model to simulate a multistage MF system, optim...

40 CFR 600.316-08 - Multistage manufacture.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Multistage manufacture. 600.316-08 Section 600.316-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Labeling § 600.316-08...

40 CFR 600.316-08 - Multistage manufacture.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Multistage manufacture. 600.316-08 Section 600.316-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Labeling § 600.316-08...

40 CFR 600.316-08 - Multistage manufacture.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Multistage manufacture. 600.316-08 Section 600.316-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Labeling § 600.316-08...

A comparative study of school based violence and strategies for control in public and private secondary schools in Osun State.

PubMed

Omisore, A G; Omisore, B; Adelekan, B; Afolabi, O T; Olajide, F O; Arije, O O; Agunbiade, O I

2012-01-01

Violence is universal; it occurs in schools (both public and private). The study aim was to assess the rates of violence as well as existing violence prevention strategies in public and private schools in Osun state. A cross sectional study was conducted among 800 secondary school students (599 in public and 201 in private schools) selected by multistage sampling technique using quantitative and qualitative methods of data collection. The mean age for all the respondents was 14.26 years +/- 2.001 Males make up about 51% of the respondents in both public and private schools. Respondents from public schools assaulted other students and staff with a weapon more than their colleagues in private schools (24.7% and 9.7% against 12.9% and 6.5% respectively). The commonest violence 'prevention' strategy in both schools was punishment for violent acts (>90%). Respondents in public schools perpetrated and experienced virtually all forms of school-related violence more than those in private, schools. There were mild differences in existing violence prevention strategies in both schools. School connectedness seems to be a major factor in the differential rates of violence between both groups of schools.

Modified silicas with different structure of grafted methylphenylsiloxane layer

NASA Astrophysics Data System (ADS)

Bolbukh, Yuliia; Terpiłowski, Konrad; Kozakevych, Roman; Sternik, Dariusz; Deryło-Marczewska, Anna; Tertykh, Valentin

2016-06-01

The method of a chemical assembly of the surface polymeric layer with high contents of the modifying agent was developed. Powders of nanodispersed silica with chemisorbed polymethylphenylsiloxane (PMPS) were synthesized by solvent-free chemical assembly technique with a dimethyl carbonate (DMC) as scission agent. Samples were characterized using FTIR spectroscopy, transmission electron microscopy (TEM), atomic force microscopy (AFM), and elemental analysis (CHN analysis). Coating microstructure, morphology, and hydrophilic-hydrophobic properties of nanoparticles were estimated. The results indicate a significant effect of the PMPS/DMC ratio at each modification stage on hydrophobic properties of modified silicas. Modification with a similar composition of the PMPS/DMC mixture, even with different polymer amount at each stage, provides the worst hydrophobicity. Results suggest that the highest hydrophobicity (contact angle θ = 135°-140°) is achieved in the case when silica modified with the PMPS/DMC mixture using multistage approach that providing a formation of the monomolecular layer of polysiloxane at the first modification step. The characteristics of surface structure were interpreted in terms of density of polymer-silica bonds at the interfaces that, usually, are reduced for modified surfaces, in a coupling with conformation model that accented the shape of chains (arch- and console-like) adsorbed on solid surfaces.

The Relationship Between Body Fat Percentage and Body Mass Index in Overweight and Obese Individuals in an Urban African Setting.

PubMed

Akindele, Mukadas O; Phillips, Julie S; Igumbor, Ehimario U

2016-08-17

The increase in the prevalence of overweight and obesity in both developed and developing countries is associated with musculoskeletal and other non-communicable diseases. To address this, an accurate measure of body adiposity, bearing in mind several shortcomings of body mass index (BMI), should be used. This study determined the relationship between BMI and body fat (BF)% among adult Nigerians of different ethnic groups residing in an urban setting. Using multistage cluster sampling technique were recruited 1571 subjects (>18 years; male=51.2%) in a cross-sectional study. Body adiposity indices were assessed using BMI and BF%. Using BF%, the result shows that a total number of 156 (9.9%) had low BF% while 291 (18.5%) had very high BF%, while the BMI classifications of body adiposity, 68 (4.3%) were underweight while 271 (17.3%) were obese. There was a strong and positive statistical relationship between BF% and BMI when both were paired without controlling for gender and age (r=0.81, P<0.01). The results show that there is a strong positive association between BMI and BF%, and age and sex are predictors of this association.

Perception and practice of contraception among male soldiers in Sobi barracks, Ilorin, Nigeria.

PubMed

Hussain, N A; Akande, T M; Osagbemi, G K; Olasupo, S T; Salawu, K Y; Adebayo, E T

2013-06-01

There is a popular belief among the general population that Nigerian soldiers tend to have large families but this has not been substantiated with evidence-based research. The Nigerian military health authority implements female-targetted contraception strategies, with less focus on their husbands; who are the dominant fertility determinants. To determine the perception and practice of contraception among male soldiers of Sobi Cantonment, Ilorin, Nigeria, with a view to instituting male-targeted contraceptive/family planning strategies. A cross-sectional survey of 334 male soldiers using multistage sampling technique and pre-tested interviewer administered questionnaires. The respondents' approval of contraception (73.6%) and willingness to discuss it with their spouses/partners (71.6%) were high. Fear of wives/partner's sexual promiscuity (55.7%), cultural and religious beliefs (43.2%), fear of the side effects of contraceptives (29.5%) and the desire for more children (21.6%) were reported reasons for the non-approval of contraception. The prevalence of contraceptive use among the respondents was low (12.3%). There was a significant relationship between the respondents' educational level and contraceptive use (p< 0.05). The study revealed a high approval and willingness to discuss contraception with their spouses/partners but low contraceptive use.

Stigmatization of people with mental illness among inhabitants of a rural community in northern Nigeria.

PubMed

Audu, Ishaq A; Idris, Suleiman H; Olisah, Victor O; Sheikh, Taiwo L

2013-02-01

Despite the fact that mental illness is a common problem in society, people's perception of the mentally ill and community attitude towards them is still rather poor, making their rehabilitation and reintegration into society an uphill task. To examine the stigmatization of people with mental illness within a rural community and identify the socio-demographic variables involved. A cross-sectional descriptive study using a multi-stage random sampling technique to obtain data through an interviewer-administered questionnaire to 325 adult inhabitants of a rural community in Nigeria. The results showed widespread ignorance about causation, mode of transmission and remedies available for mental illness, with only 0.9% of respondents attributing mental illness to brain disease. The others attributed it to spiritual attack, punishment for evil doing and illicit psychoactive substance use, among other things. Negative views about the mentally ill were also widely expressed resulting in discriminatory practices. Stigmatization of people with mental illness is still rampant in our community. There is a need for adequate public education about the causes and mode of transmission of mental illness and the treatment options available in the community.

Associations of self-esteem with body mass index and body image among Saudi college-age females.

PubMed

ALAhmari, Tasneem; Alomar, Abdulaziz Z; ALBeeybe, Jumanah; Asiri, Nawal; ALAjaji, Reema; ALMasoud, Reem; Al-Hazzaa, Hazzaa M

2017-12-27

To examine the association of self-esteem with the body mass index (BMI), perceived body image (BI), and desired BI of college-age Saudi females. A cross-sectional study was conducted with 907 randomly selected females using a multistage stratified cluster sampling technique. Self-esteem and BI were assessed using the Rosenberg Self-Esteem Scale and Stunkard Figure Rating Scale, respectively. The prevalence of low self-esteem was only 6.1% among college females; however, this percentage was higher (9.8%) among overweight or obese participants. The total self-esteem scores showed significant negative correlations with actual BMI and perceived BI, but not with desired BI. Meanwhile, multivariate analyses revealed significant differences in total self-esteem scores according to obesity/overweight status and perceived BI group, but not desired BI group. Despite the high prevalence of overweight and obesity in Saudi Arabia, few Saudi college females have low self-esteem. In addition, body weight, BMI, perceived BI, and the BMI corresponding to the perceived BI all significantly differed between females with low self-esteem and those with normal self-esteem. Level V, cross-sectional descriptive study.

Payment for Health Care and Perception of the National Health Insurance Scheme in a Rural Area in Southwest Nigeria

PubMed Central

Adewole, David A.; Adebayo, Ayodeji M.; Udeh, Emeka I.; Shaahu, Vivian N.; Dairo, Magbagbeola D.

2015-01-01

Health insurance coverage of the informal sector is a challenge in Nigeria. This study assessed the methods of payment for health care and awareness about the National Health Insurance Scheme (NHIS) among members of selected households in a rural area in the southwest of Nigeria. Using a multistage sampling technique, a semi-structured, pretested interviewer-administered questionnaire was used to collect data from 345 households. The majority of the people still pay for health care by out-of-pocket (OOP) method. Awareness about the NHIS in Nigeria was poor, but attitude to it was encouraging; and from the responses obtained, the people implied that they were willing to enroll in the scheme if the opportunity is offered. However, lack of trust in government social policies, religious belief, and poverty were some of the factors that might impede the implementation and expansion of the NHIS in the informal sector. Stakeholders should promote socioculturally appropriate awareness program about the NHIS and its benefits. Factors that might present challenges to the scheme should be adequately addressed by the government and other stakeholders associated with prepayment schemes in Nigeria. PMID:26195464

Payment for Health Care and Perception of the National Health Insurance Scheme in a Rural Area in Southwest Nigeria.

PubMed

Adewole, David A; Adebayo, Ayodeji M; Udeh, Emeka I; Shaahu, Vivian N; Dairo, Magbagbeola D

2015-09-01

Health insurance coverage of the informal sector is a challenge in Nigeria. This study assessed the methods of payment for health care and awareness about the National Health Insurance Scheme (NHIS) among members of selected households in a rural area in the southwest of Nigeria. Using a multistage sampling technique, a semi-structured, pretested interviewer-administered questionnaire was used to collect data from 345 households. The majority of the people still pay for health care by out-of-pocket (OOP) method. Awareness about the NHIS in Nigeria was poor, but attitude to it was encouraging; and from the responses obtained, the people implied that they were willing to enroll in the scheme if the opportunity is offered. However, lack of trust in government social policies, religious belief, and poverty were some of the factors that might impede the implementation and expansion of the NHIS in the informal sector. Stakeholders should promote socioculturally appropriate awareness program about the NHIS and its benefits. Factors that might present challenges to the scheme should be adequately addressed by the government and other stakeholders associated with prepayment schemes in Nigeria. © The American Society of Tropical Medicine and Hygiene.

Multi-stage volcanic island flank collapses with coeval explosive caldera-forming eruptions.

PubMed

Hunt, James E; Cassidy, Michael; Talling, Peter J

2018-01-18

Volcanic flank collapses and explosive eruptions are among the largest and most destructive processes on Earth. Events at Mount St. Helens in May 1980 demonstrated how a relatively small (<5 km 3 ) flank collapse on a terrestrial volcano could immediately precede a devastating eruption. The lateral collapse of volcanic island flanks, such as in the Canary Islands, can be far larger (>300 km 3 ), but can also occur in complex multiple stages. Here, we show that multistage retrogressive landslides on Tenerife triggered explosive caldera-forming eruptions, including the Diego Hernandez, Guajara and Ucanca caldera eruptions. Geochemical analyses were performed on volcanic glasses recovered from marine sedimentary deposits, called turbidites, associated with each individual stage of each multistage landslide. These analyses indicate only the lattermost stages of subaerial flank failure contain materials originating from respective coeval explosive eruption, suggesting that initial more voluminous submarine stages of multi-stage flank collapse induce these aforementioned explosive eruption. Furthermore, there are extended time lags identified between the individual stages of multi-stage collapse, and thus an extended time lag between the initial submarine stages of failure and the onset of subsequent explosive eruption. This time lag succeeding landslide-generated static decompression has implications for the response of magmatic systems to un-roofing and poses a significant implication for ocean island volcanism and civil emergency planning.

Gender roles, family relationships, and household food and nutrition security in Ohafia matrilineal society in Nigeria.

PubMed

Ene-Obong, Henrietta Nkechi; Onuoha, Nne Ola; Eme, Paul Eze

2017-11-01

This study examined gender roles, family relationships, food security, and nutritional status of households in Ohafia: a matrilineal society in Nigeria. A cross-sectional descriptive study was conducted. Multistage sampling technique was used to select 287 households from three villages: Akanu, Amangwu, and Elu. Qualitative and quantitative data collection methods were adopted, namely, focus group discussions and questionnaires. Anthropometric measurements (height and weight for mothers and children and Mid-Upper Arm Circumference for young children) were taken using standard techniques. The body mass index of women was calculated. All nutritional indices were compared with reference standards. Food insecurity was assessed using the Household Hunger Scale and Dietary Diversity Score, then analysed using the Statistical Product for Service Solution version 21. Data analysis used descriptive statistics. Most (91.2%) of the respondents were female. The matrilineal system known as ikwu nne or iri ala a nne (inheritance through mothers' lineage) is still in place but is changing. One important benefit of the system is the access to land by women. Whereas women participated actively in agriculture, food preparation, and care of family, the men were moving to off-farm activities. High prevalence of household food insecurity (66%) and signs of malnutrition including moderate to severe stunting (48.4%) and wasting (31.7%) in children, household hunger (34.5%), and overweight (27.5%) and obesity (19.2%) among mothers were observed. These communities urgently need gender sensitive food and nutrition interventions. © 2018 John Wiley & Sons Ltd.

KINETIC STUDIES RELATED TO THE LIMB (LIMESTONE INJECTION MULTISTAGE BURNER) BURNER

EPA Science Inventory

The report gives results of theoretical and experimental studies of subjects related to the limestone injection multistage burner (LIMB). The main findings include data on the rate of evolution of H2S from different coals and on the dependence of the rate of evolution on the dist...

Optimal Testlet Pool Assembly for Multistage Testing Designs

ERIC Educational Resources Information Center

Ariel, Adelaide; Veldkamp, Bernard P.; Breithaupt, Krista

2006-01-01

Computerized multistage testing (MST) designs require sets of test questions (testlets) to be assembled to meet strict, often competing criteria. Rules that govern testlet assembly may dictate the number of questions on a particular subject or may describe desirable statistical properties for the test, such as measurement precision. In an MST…

Test Information Targeting Strategies for Adaptive Multistage Testing Designs.

ERIC Educational Resources Information Center

Luecht, Richard M.; Burgin, William

Adaptive multistage testlet (MST) designs appear to be gaining popularity for many large-scale computer-based testing programs. These adaptive MST designs use a modularized configuration of preconstructed testlets and embedded score-routing schemes to prepackage different forms of an adaptive test. The conditional information targeting (CIT)…

Multi-stage Continuous Culture Fermentation of Glucose-Xylose Mixtures to Fuel Ethanol using Genetically Engineered Saccharomyces cerevisiae 424A

EPA Science Inventory

Multi-stage continuous (chemostat) culture fermentation (MCCF) with variable fermentor volumes was carried out to study utilizing glucose and xylose for ethanol production by means of mixed sugar fermentation (MSF). Variable fermentor volumes were used to enable enhanced sugar u...

Prevalence and Correlates of Direct Self-Injurious Behavior among Chinese Adolescents: Findings from a Multicenter and Multistage Survey.

PubMed

Xin, Xiuhong; Wang, Yuping; Fang, Jianqun; Ming, Qingsen; Yao, Shuqiao

2017-05-01

Direct self-injurious behavior (DSIB) has become an important focus due to its perniciousness and perplexity. Little is known about its prevalence and correlative factors in Chinese adolescents, including how data may differ according to gender. A multicenter, multistage stratified cluster random sampling was used to examine the previous 12-month prevalence of DSIB, as well as the possible correlates of demographics, risky behaviors, suicidality, and psychosocial factors associated with DSIB in a school-based sample of 11,880 students (49.5 % boys and 50.5 % girls). Approximately 30 % of the adolescents in the sample reported at least one incident of DSIB in the past 12-month period. After controlling for demographic variables, analyses of the independent relationships of DSIB with risky behaviors, suicidality, and psychosocial factors were conducted for each gender. Smoking, binge drinking, running away from home, suicide ideation, suicide plans, positive affect, and physical symptoms were identified as common factors associated with DSIB for both genders in the final model. In addition, truancy, fighting, physical inactivity, motor impulsiveness, and depressed affect were found to be related to DSIB in boys, whereas suicide attempts and somatic complaints were found to be related to DSIB in girls. Separation anxiety and social anxiety associated negatively with DSIB in boys and girls, respectively. DSIB was not found to independently relate to attention impulsiveness, non-planned impulsiveness, self-esteem, or harm avoidance in either genders. DSIB was prevalent in Chinese adolescents. Programs intended to promote physical and mental health in adolescents should take into account gender differences in DSIB-associated factors, including risky behaviors, suicidality, and psychosocial factors.

Analysis of antioxidants in insulation cladding of copper wire: a comparison of different mass spectrometric techniques (ESI-IT, MALDI-RTOF and RTOF-SIMS).

PubMed

Schnöller, Johannes; Pittenauer, Ernst; Hutter, Herbert; Allmaier, Günter

2009-12-01

Commercial copper wire and its polymer insulation cladding was investigated for the presence of three synthetic antioxidants (ADK STAB AO412S, Irganox 1010 and Irganox MD 1024) by three different mass spectrometric techniques including electrospray ionization-ion trap-mass spectrometry (ESI-IT-MS), matrix-assisted laser desorption/ionization reflectron time-of-flight (TOF) mass spectrometry (MALDI-RTOF-MS) and reflectron TOF secondary ion mass spectrometry (RTOF-SIMS). The samples were analyzed either directly without any treatment (RTOF-SIMS) or after a simple liquid/liquid extraction step (ESI-IT-MS, MALDI-RTOF-MS and RTOF-SIMS). Direct analysis of the copper wire itself or of the insulation cladding by RTOF-SIMS allowed the detection of at least two of the three antioxidants but at rather low sensitivity as molecular radical cations and with fairly strong fragmentation (due to the highly energetic ion beam of the primary ion gun). ESI-IT- and MALDI-RTOF-MS-generated abundant protonated and/or cationized molecules (ammoniated or sodiated) from the liquid/liquid extract. Only ESI-IT-MS allowed simultaneous detection of all three analytes in the extract of insulation claddings. The latter two so-called 'soft' desorption/ionization techniques exhibited intense fragmentation only by applying low-energy collision-induced dissociation (CID) tandem MS on a multistage ion trap-instrument and high-energy CID on a tandem TOF-instrument (TOF/RTOF), respectively. Strong differences in the fragmentation behavior of the three analytes could be observed between the different CID spectra obtained from either the IT-instrument (collision energy in the very low eV range) or the TOF/RTOF-instrument (collision energy 20 keV), but both delivered important structural information. Copyright 2009 John Wiley & Sons, Ltd.

Multi-stage robust scheme for citrus identification from high resolution airborne images

NASA Astrophysics Data System (ADS)

Amorós-López, Julia; Izquierdo Verdiguier, Emma; Gómez-Chova, Luis; Muñoz-Marí, Jordi; Zoilo Rodríguez-Barreiro, Jorge; Camps-Valls, Gustavo; Calpe-Maravilla, Javier

2008-10-01

Identification of land cover types is one of the most critical activities in remote sensing. Nowadays, managing land resources by using remote sensing techniques is becoming a common procedure to speed up the process while reducing costs. However, data analysis procedures should satisfy the accuracy figures demanded by institutions and governments for further administrative actions. This paper presents a methodological scheme to update the citrus Geographical Information Systems (GIS) of the Comunidad Valenciana autonomous region, Spain). The proposed approach introduces a multi-stage automatic scheme to reduce visual photointerpretation and ground validation tasks. First, an object-oriented feature extraction process is carried out for each cadastral parcel from very high spatial resolution (VHR) images (0.5m) acquired in the visible and near infrared. Next, several automatic classifiers (decision trees, multilayer perceptron, and support vector machines) are trained and combined to improve the final accuracy of the results. The proposed strategy fulfills the high accuracy demanded by policy makers by means of combining automatic classification methods with visual photointerpretation available resources. A level of confidence based on the agreement between classifiers allows us an effective management by fixing the quantity of parcels to be reviewed. The proposed methodology can be applied to similar problems and applications.

A multigrid method for steady Euler equations on unstructured adaptive grids

NASA Technical Reports Server (NTRS)

Riemslagh, Kris; Dick, Erik

1993-01-01

A flux-difference splitting type algorithm is formulated for the steady Euler equations on unstructured grids. The polynomial flux-difference splitting technique is used. A vertex-centered finite volume method is employed on a triangular mesh. The multigrid method is in defect-correction form. A relaxation procedure with a first order accurate inner iteration and a second-order correction performed only on the finest grid, is used. A multi-stage Jacobi relaxation method is employed as a smoother. Since the grid is unstructured a Jacobi type is chosen. The multi-staging is necessary to provide sufficient smoothing properties. The domain is discretized using a Delaunay triangular mesh generator. Three grids with more or less uniform distribution of nodes but with different resolution are generated by successive refinement of the coarsest grid. Nodes of coarser grids appear in the finer grids. The multigrid method is started on these grids. As soon as the residual drops below a threshold value, an adaptive refinement is started. The solution on the adaptively refined grid is accelerated by a multigrid procedure. The coarser multigrid grids are generated by successive coarsening through point removement. The adaption cycle is repeated a few times. Results are given for the transonic flow over a NACA-0012 airfoil.

Optimizing for Large Planar Fractures in Multistage Horizontal Wells in Enhanced Geothermal Systems Using a Coupled Fluid and Geomechanics Simulator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Xiexiaomen; Tutuncu, Azra; Eustes, Alfred

Enhanced Geothermal Systems (EGS) could potentially use technological advancements in coupled implementation of horizontal drilling and multistage hydraulic fracturing techniques in tight oil and shale gas reservoirs along with improvements in reservoir simulation techniques to design and create EGS reservoirs. In this study, a commercial hydraulic fracture simulation package, Mangrove by Schlumberger, was used in an EGS model with largely distributed pre-existing natural fractures to model fracture propagation during the creation of a complex fracture network. The main goal of this study is to investigate optimum treatment parameters in creating multiple large, planar fractures to hydraulically connect a horizontal injectionmore » well and a horizontal production well that are 10,000 ft. deep and spaced 500 ft. apart from each other. A matrix of simulations for this study was carried out to determine the influence of reservoir and treatment parameters on preventing (or aiding) the creation of large planar fractures. The reservoir parameters investigated during the matrix simulations include the in-situ stress state and properties of the natural fracture set such as the primary and secondary fracture orientation, average fracture length, and average fracture spacing. The treatment parameters investigated during the simulations were fluid viscosity, proppant concentration, pump rate, and pump volume. A final simulation with optimized design parameters was performed. The optimized design simulation indicated that high fluid viscosity, high proppant concentration, large pump volume and pump rate tend to minimize the complexity of the created fracture network. Additionally, a reservoir with 'friendly' formation characteristics such as large stress anisotropy, natural fractures set parallel to the maximum horizontal principal stress (SHmax), and large natural fracture spacing also promote the creation of large planar fractures while minimizing fracture complexity.« less

Loading, Release, Biodegradation, and Biocompatibility of a Nanovector Delivery System

NASA Technical Reports Server (NTRS)

Ferrai, Mauro; Tasciotti, Ennio

2012-01-01

A nanovector multistage system has been created to overcome or bypass sequential barriers within the human body, in order to deliver a therapeutic or imaging agent to a specific location. This innovation consists of a composition that includes two or more stages of particles, such that smaller, later-stage particles are contained in the larger, early-stage particles. An active agent, such as a therapeutic agent or imaging agent, is preferentially delivered and/or localized to a particular target site in the body of a subject. The multistage composition overcomes multiple biological barriers in the body. The multistage composition also allows for simultaneous delivery and localization at the same or different target sites of multiple active agents.

Solvent-assisted multistage nonequilibrium electron transfer in rigid supramolecular systems: Diabatic free energy surfaces and algorithms for numerical simulations

NASA Astrophysics Data System (ADS)

Feskov, Serguei V.; Ivanov, Anatoly I.

2018-03-01

An approach to the construction of diabatic free energy surfaces (FESs) for ultrafast electron transfer (ET) in a supramolecule with an arbitrary number of electron localization centers (redox sites) is developed, supposing that the reorganization energies for the charge transfers and shifts between all these centers are known. Dimensionality of the coordinate space required for the description of multistage ET in this supramolecular system is shown to be equal to N - 1, where N is the number of the molecular centers involved in the reaction. The proposed algorithm of FES construction employs metric properties of the coordinate space, namely, relation between the solvent reorganization energy and the distance between the two FES minima. In this space, the ET reaction coordinate zn n' associated with electron transfer between the nth and n'th centers is calculated through the projection to the direction, connecting the FES minima. The energy-gap reaction coordinates zn n' corresponding to different ET processes are not in general orthogonal so that ET between two molecular centers can create nonequilibrium distribution, not only along its own reaction coordinate but along other reaction coordinates too. This results in the influence of the preceding ET steps on the kinetics of the ensuing ET. It is important for the ensuing reaction to be ultrafast to proceed in parallel with relaxation along the ET reaction coordinates. Efficient algorithms for numerical simulation of multistage ET within the stochastic point-transition model are developed. The algorithms are based on the Brownian simulation technique with the recrossing-event detection procedure. The main advantages of the numerical method are (i) its computational complexity is linear with respect to the number of electronic states involved and (ii) calculations can be naturally parallelized up to the level of individual trajectories. The efficiency of the proposed approach is demonstrated for a model supramolecular system involving four redox centers.

Ontology-Driven Search and Triage: Design of a Web-Based Visual Interface for MEDLINE.

PubMed

Demelo, Jonathan; Parsons, Paul; Sedig, Kamran

2017-02-02

Diverse users need to search health and medical literature to satisfy open-ended goals such as making evidence-based decisions and updating their knowledge. However, doing so is challenging due to at least two major difficulties: (1) articulating information needs using accurate vocabulary and (2) dealing with large document sets returned from searches. Common search interfaces such as PubMed do not provide adequate support for exploratory search tasks. Our objective was to improve support for exploratory search tasks by combining two strategies in the design of an interactive visual interface by (1) using a formal ontology to help users build domain-specific knowledge and vocabulary and (2) providing multi-stage triaging support to help mitigate the information overload problem. We developed a Web-based tool, Ontology-Driven Visual Search and Triage Interface for MEDLINE (OVERT-MED), to test our design ideas. We implemented a custom searchable index of MEDLINE, which comprises approximately 25 million document citations. We chose a popular biomedical ontology, the Human Phenotype Ontology (HPO), to test our solution to the vocabulary problem. We implemented multistage triaging support in OVERT-MED, with the aid of interactive visualization techniques, to help users deal with large document sets returned from searches. Formative evaluation suggests that the design features in OVERT-MED are helpful in addressing the two major difficulties described above. Using a formal ontology seems to help users articulate their information needs with more accurate vocabulary. In addition, multistage triaging combined with interactive visualizations shows promise in mitigating the information overload problem. Our strategies appear to be valuable in addressing the two major problems in exploratory search. Although we tested OVERT-MED with a particular ontology and document collection, we anticipate that our strategies can be transferred successfully to other contexts. ©Jonathan Demelo, Paul Parsons, Kamran Sedig. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 02.02.2017.

Ontology-Driven Search and Triage: Design of a Web-Based Visual Interface for MEDLINE

PubMed Central

2017-01-01

Background Diverse users need to search health and medical literature to satisfy open-ended goals such as making evidence-based decisions and updating their knowledge. However, doing so is challenging due to at least two major difficulties: (1) articulating information needs using accurate vocabulary and (2) dealing with large document sets returned from searches. Common search interfaces such as PubMed do not provide adequate support for exploratory search tasks. Objective Our objective was to improve support for exploratory search tasks by combining two strategies in the design of an interactive visual interface by (1) using a formal ontology to help users build domain-specific knowledge and vocabulary and (2) providing multi-stage triaging support to help mitigate the information overload problem. Methods We developed a Web-based tool, Ontology-Driven Visual Search and Triage Interface for MEDLINE (OVERT-MED), to test our design ideas. We implemented a custom searchable index of MEDLINE, which comprises approximately 25 million document citations. We chose a popular biomedical ontology, the Human Phenotype Ontology (HPO), to test our solution to the vocabulary problem. We implemented multistage triaging support in OVERT-MED, with the aid of interactive visualization techniques, to help users deal with large document sets returned from searches. Results Formative evaluation suggests that the design features in OVERT-MED are helpful in addressing the two major difficulties described above. Using a formal ontology seems to help users articulate their information needs with more accurate vocabulary. In addition, multistage triaging combined with interactive visualizations shows promise in mitigating the information overload problem. Conclusions Our strategies appear to be valuable in addressing the two major problems in exploratory search. Although we tested OVERT-MED with a particular ontology and document collection, we anticipate that our strategies can be transferred successfully to other contexts. PMID:28153818

Water and sodium intake habits and status of ultra-endurance runners during a multi-stage ultra-marathon conducted in a hot ambient environment: an observational field based study

PubMed Central

2013-01-01

Background Anecdotal evidence suggests ultra-runners may not be consuming sufficient water through foods and fluids to maintenance euhydration, and present sub-optimal sodium intakes, throughout multi-stage ultra-marathon (MSUM) competitions in the heat. Subsequently, the aims were primarily to assess water and sodium intake habits of recreational ultra-runners during a five stage 225 km semi self-sufficient MSUM conducted in a hot ambient environment (Tmax range: 32°C to 40°C); simultaneously to monitor serum sodium concentration, and hydration status using multiple hydration assessment techniques. Methods Total daily, pre-stage, during running, and post-stage water and sodium ingestion of ultra-endurance runners (UER, n = 74) and control (CON, n = 12) through foods and fluids were recorded on Stages 1 to 4 by trained dietetic researchers using dietary recall interview technique, and analysed through dietary analysis software. Body mass (BM), hydration status, and serum sodium concentration were determined pre- and post-Stages 1 to 5. Results Water (overall mean (SD): total daily 7.7 (1.5) L/day, during running 732 (183) ml/h) and sodium (total daily 3.9 (1.3) g/day, during running 270 (151) mg/L) ingestion did not differ between stages in UER (p < 0.001 vs. CON). Exercise-induced BM loss was 2.4 (1.2)% (p < 0.001). Pre- to post-stage BM gains were observed in 26% of UER along competition. Pre- and post-stage plasma osmolality remained within normal clinical reference range (280 to 303 mOsmol/kg) in the majority of UER (p > 0.05 vs. CON pre-stage). Asymptomatic hyponatraemia (<135 mmol/L) was evident pre- and post-stage in n = 8 UER, corresponding to 42% of sampled participants. Pre- and post-stage urine colour, urine osmolality and urine/plasma osmolality ratio increased (p < 0.001) as competition progressed in UER, with no change in CON. Plasma volume and extra-cellular water increased (p < 0.001) 22.8% and 9.2%, respectively, from pre-Stage 1 to 5 in UER, with no change in CON. Conclusion Water intake habits of ultra-runners during MSUM conducted in hot ambient conditions appear to be sufficient to maintain baseline euhydration levels. However, fluid over-consumption behaviours were evident along competition, irrespective of running speed and gender. Normonatraemia was observed in the majority of ultra-runners throughout MSUM, despite sodium ingestion under benchmark recommendations. PMID:23320854

A Top-Down Approach to Designing the Computerized Adaptive Multistage Test

ERIC Educational Resources Information Center

Luo, Xiao; Kim, Doyoung

2018-01-01

The top-down approach to designing a multistage test is relatively understudied in the literature and underused in research and practice. This study introduced a route-based top-down design approach that directly sets design parameters at the test level and utilizes the advanced automated test assembly algorithm seeking global optimality. The…

Multi-stage flash degaser

DOEpatents

Rapier, P.M.

1980-06-26

A multi-stage flash degaser is incorporated in an energy conversion system having a direct-contact, binary-fluid heat exchanger to remove essentially all of the noncondensable gases from geothermal brine ahead of the direct-contact binary-fluid heat exchanger in order that the heat exchanger and a turbine and condenser of the system can operate at optimal efficiency.

Panel Design Variations in the Multistage Test Using the Mixed-Format Tests

ERIC Educational Resources Information Center

Kim, Jiseon; Chung, Hyewon; Dodd, Barbara G.; Park, Ryoungsun

2012-01-01

This study compared various panel designs of the multistage test (MST) using mixed-format tests in the context of classification testing. Simulations varied the design of the first-stage module. The first stage was constructed according to three levels of test information functions (TIFs) with three different TIF centers. Additional computerized…

A Multi-Stage Maturity Model for Long-Term IT Outsourcing Relationship Success

ERIC Educational Resources Information Center

Luong, Ming; Stevens, Jeff

2015-01-01

The Multi-Stage Maturity Model for Long-Term IT Outsourcing Relationship Success, a theoretical stages-of-growth model, explains long-term success in IT outsourcing relationships. Research showed the IT outsourcing relationship life cycle consists of four distinct, sequential stages: contract, transition, support, and partnership. The model was…

Development of JSTAMP-Works/NV and HYSTAMP for Multipurpose Multistage Sheet Metal Forming Simulation

NASA Astrophysics Data System (ADS)

Umezu, Yasuyoshi; Watanabe, Yuko; Ma, Ninshu

2005-08-01

Since 1996, Japan Research Institute Limited (JRI) has been providing a sheet metal forming simulation system called JSTAMP-Works packaged the FEM solvers of LS-DYNA and JOH/NIKE, which might be the first multistage system at that time and has been enjoying good reputation among users in Japan. To match the recent needs, "faster, more accurate and easier", of process designers and CAE engineers, a new metal forming simulation system JSTAMP-Works/NV is developed. The JSTAMP-Works/NV packaged the automatic healing function of CAD and had much more new capabilities such as prediction of 3D trimming lines for flanging or hemming, remote control of solver execution for multi-stage forming processes and shape evaluation between FEM and CAD. On the other way, a multi-stage multi-purpose inverse FEM solver HYSTAMP is developed and will be soon put into market, which is approved to be very fast, quite accurate and robust. Lastly, authors will give some application examples of user defined ductile damage subroutine in LS-DYNA for the estimation of material failure and springback in metal forming simulation.

First demonstration of an emulsion multi-stage shifter for accelerator neutrino experiments in J-PARC T60

NASA Astrophysics Data System (ADS)

Yamada, K.; Aoki, S.; Cao, S.; Chikuma, N.; Fukuda, T.; Fukuzawa, Y.; Gonin, M.; Hayashino, T.; Hayato, Y.; Hiramoto, A.; Hosomi, F.; Inoh, T.; Iori, S.; Ishiguro, K.; Kawahara, H.; Kim, H.; Kitagawa, N.; Koga, T.; Komatani, R.; Komatsu, M.; Matsushita, A.; Mikado, S.; Minamino, A.; Mizusawa, H.; Matsumoto, T.; Matsuo, T.; Morimoto, Y.; Morishima, K.; Morishita, M.; Naganawa, N.; Nakamura, K.; Nakamura, M.; Nakamura, Y.; Nakano, T.; Nakatsuka, Y.; Nakaya, T.; Nishio, A.; Ogawa, S.; Oshima, H.; Quilain, B.; Rokujo, H.; Sato, O.; Seiya, Y.; Shibuya, H.; Shiraishi, T.; Suzuki, Y.; Tada, S.; Takahashi, S.; Yokoyama, M.; Yoshimoto, M.

2017-06-01

We describe the first ever implementation of a clock-based, multi-stage emulsion shifter in an accelerator neutrino experiment. The system was installed in the neutrino monitoring building at the Japan Proton Accelerator Research Complex as part of a test experiment, T60, and stable operation was maintained for a total of 126.6 days. By applying time information to emulsion films, various results were obtained. Time resolutions of 5.3-14.7 s were evaluated in an operation spanning 46.9 days (yielding division numbers of 1.4-3.8×105). By using timing and spatial information, reconstruction of coincident events consisting of high-multiplicity and vertex-contained events, including neutrino events, was performed. Emulsion events were matched to events observed by INGRID, one of the on-axis near detectors of the T2K experiment, with high reliability (98.5%), and hybrid analysis of the emulsion and INGRID events was established by means of the multi-stage shifter. The results demonstrate that the multi-stage shifter can feasibly be used in neutrino experiments.

The influence of the "cage effect" on the mechanism of reversible bimolecular multistage chemical reactions in solutions.

PubMed

Doktorov, Alexander B

2015-08-21

Manifestations of the "cage effect" at the encounters of reactants are theoretically treated by the example of multistage reactions in liquid solutions including bimolecular exchange reactions as elementary stages. It is shown that consistent consideration of quasi-stationary kinetics of multistage reactions (possible only in the framework of the encounter theory) for reactions proceeding near reactants contact can be made on the basis of the concepts of a "cage complex." Though mathematically such a consideration is more complicated, it is more clear from the standpoint of chemical notions. It is established that the presence of the "cage effect" leads to some important effects not inherent in reactions in gases or those in solutions proceeding in the kinetic regime, such as the appearance of new transition channels of reactant transformation that cannot be caused by elementary event of chemical conversion for the given mechanism of reaction. This results in that, for example, rate constant values of multistage reaction defined by standard kinetic equations of formal chemical kinetics from experimentally measured kinetics can differ essentially from real values of these constants.

Health condition identification of multi-stage planetary gearboxes using a mRVM-based method

NASA Astrophysics Data System (ADS)

Lei, Yaguo; Liu, Zongyao; Wu, Xionghui; Li, Naipeng; Chen, Wu; Lin, Jing

2015-08-01

Multi-stage planetary gearboxes are widely applied in aerospace, automotive and heavy industries. Their key components, such as gears and bearings, can easily suffer from damage due to tough working environment. Health condition identification of planetary gearboxes aims to prevent accidents and save costs. This paper proposes a method based on multiclass relevance vector machine (mRVM) to identify health condition of multi-stage planetary gearboxes. In this method, a mRVM algorithm is adopted as a classifier, and two features, i.e. accumulative amplitudes of carrier orders (AACO) and energy ratio based on difference spectra (ERDS), are used as the input of the classifier to classify different health conditions of multi-stage planetary gearboxes. To test the proposed method, seven health conditions of a two-stage planetary gearbox are considered and vibration data is acquired from the planetary gearbox under different motor speeds and loading conditions. The results of three tests based on different data show that the proposed method obtains an improved identification performance and robustness compared with the existing method.

Sampling bias in an international internet survey of diversion programs in the criminal justice system.

PubMed

Hartford, Kathleen; Carey, Robert; Mendonca, James

2007-03-01

Despite advances in the storage and retrieval of information within health care systems, health researchers conducting surveys for evaluations still face technical barriers that may lead to sampling bias. The authors describe their experience in administering a Web-based, international survey to English-speaking countries. Identifying the sample was a multistage effort involving (a) searching for published e-mail addresses, (b) conducting Web searches for publicly funded agencies, and (c) performing literature searches, personal contacts, and extensive Internet searches for individuals. After pretesting, the survey was converted into an electronic format accessible by multiple Web browsers. Sampling bias arose from (a) system incompatibility, which did not allow potential respondents to open the survey, (b) varying institutional gate-keeping policies that "recognized" the unsolicited survey as spam, (c) culturally unique program terminology, which confused some respondents, and (d) incomplete sampling frames. Solutions are offered to the first three problems, and the authors note that sampling bias remains a crucial problem.

New generation of universal modeling for centrifugal compressors calculation

NASA Astrophysics Data System (ADS)

Galerkin, Y.; Drozdov, A.

2015-08-01

The Universal Modeling method is in constant use from mid - 1990th. Below is presented the newest 6th version of the Method. The flow path configuration of 3D impellers is presented in details. It is possible to optimize meridian configuration including hub/shroud curvatures, axial length, leading edge position, etc. The new model of vaned diffuser includes flow non-uniformity coefficient based on CFD calculations. The loss model was built from the results of 37 experiments with compressors stages of different flow rates and loading factors. One common set of empirical coefficients in the loss model guarantees the efficiency definition within an accuracy of 0.86% at the design point and 1.22% along the performance curve. The model verification was made. Four multistage compressors performances with vane and vaneless diffusers were calculated. As the model verification was made, four multistage compressors performances with vane and vaneless diffusers were calculated. Two of these compressors have quite unusual flow paths. The modeling results were quite satisfactory in spite of these peculiarities. One sample of the verification calculations is presented in the text. This 6th version of the developed computer program is being already applied successfully in the design practice.

Talent identification model for sprinter using discriminant factor

NASA Astrophysics Data System (ADS)

Kusnanik, N. W.; Hariyanto, A.; Herdyanto, Y.; Satia, A.

2018-01-01

The main purpose of this study was to identify young talented sprinter using discriminant factor. The research was conducted in 3 steps including item pool, screening of item pool, and trial of instruments at the small and big size of samples. 315 male elementary school students participated in this study with mean age of 11-13 years old. Data were collected by measuring anthropometry (standing height, sitting height, body mass, and leg length); testing physical fitness (40m sprint for speed, shuttle run for agility, standing broad jump for power, multistage fitness test for endurance). Data were analyzed using discriminant factor. The result of this study found that there were 5 items that selected as an instrument to identify young talented sprinter: sitting height, body mass, leg length, sprint 40m, and multistage fitness test. Model of Discriminant for talent identification in sprinter was D = -24,497 + (0,155 sitting height) + (0,080 body mass) + (0,148 leg length) + (-1,225 Sprint 40m) + (0,563 MFT). The conclusion of this study: instrument tests that have been selected and discriminant model that have been found can be applied to identify young talented as a sprinter.

Using formative research to design a context-specific behaviour change strategy to improve infant and young child feeding practices and nutrition in Nepal.

PubMed

Locks, Lindsey M; Pandey, Pooja R; Osei, Akoto K; Spiro, David S; Adhikari, Debendra P; Haselow, Nancy J; Quinn, Victoria J; Nielsen, Jennifer N

2015-10-01

Global recommendations on strategies to improve infant feeding, care and nutrition are clear; however, there is limited literature that explains methods for tailoring these recommendations to the local context where programmes are implemented. This paper aims to: (1) highlight the individual, cultural and environmental factors revealed by formative research to affect infant and young child feeding and care practices in Baitadi district of Far Western Nepal; and (2) outline how both quantitative and qualitative research methods were used to design a context-specific behaviour change strategy to improve child nutrition. Quantitative data on 750 children aged 12-23 months and their families were collected via surveys administered to mothers. The participants were selected using a multistage cluster sampling technique. The survey asked about knowledge, attitude and behaviours relating to infant and young child feeding. Qualitative data on breastfeeding and complementary feeding beliefs and practices were also collected from a separate sample via focus group discussions with mothers, and key informant interviews with mothers-in-law and husbands. Key findings revealed gaps in knowledge among many informants resulting in suboptimal infant and young child feeding practices - particularly with relation to duration of exclusive breastfeeding and dietary diversity of complementary foods. The findings from this research were then incorporated into a context-specific nutrition behaviour change communication strategy. © 2013 Helen Keller International © 2013 John Wiley & Sons, Ltd.

Prevalence of Cognitive Impairment and Depression among a Population Aged over 60 Years in the Metropolitan Area of Guadalajara, Mexico.

PubMed

Ortiz, Genaro G; Arias-Merino, Elva D; Flores-Saiffe, María E; Velázquez-Brizuela, Irma E; Macías-Islas, Miguel A; Pacheco-Moisés, Fermín P

2012-01-01

Background. Cognitive impairment is an important clinical issue among elderly patients with depression and has a more complex etiology because of the variable rate of neurodegenerative changes associated with depression. The aim of the present work was to examine the prevalence of cognitive impairment and depression in a representative sample of adults aged ≥60 years. Methods. The presented work was a cross-sectional study on the prevalence of cognitive impairment and depression. Door-to-door interview technique was assigned in condition with multistage probability random sampling to obtain subjects that represent a population of the Guadalajara metropolitan area (GMA), Mexico. Cognitive function and depression were assessed by applying standardized Mini-Mental State Examination of Folstein (MMSE) and the Geriatric Depression Scale (GDS), respectively. Results. Prevalence of cognitive impairment was 13.8% (14.5% women, 12.6% men); no significant differences by gender and retired or pensioner were found. Prevalence of depression was 29.1% (33.6% women, 21.1% men); no significant differences by retired or pensioner were found. Cognitive impairment was associated with depression (OR  =  3.26, CI 95%, 2.31-4.60). Prevalence of cognitive impairment and depression is associated with: being woman, only in depression being older than 75 years being married, and a low level of education. Conclusion. Cognitive impairment and depression are highly correlated in adults aged ≥60.

Prevalence of Cognitive Impairment and Depression among a Population Aged over 60 Years in the Metropolitan Area of Guadalajara, Mexico

PubMed Central

Ortiz, Genaro G.; Arias-Merino, Elva D.; Flores-Saiffe, María E.; Velázquez-Brizuela, Irma E.; Macías-Islas, Miguel A.; Pacheco-Moisés, Fermín P.

2012-01-01

Background. Cognitive impairment is an important clinical issue among elderly patients with depression and has a more complex etiology because of the variable rate of neurodegenerative changes associated with depression. The aim of the present work was to examine the prevalence of cognitive impairment and depression in a representative sample of adults aged ≥60 years. Methods. The presented work was a cross-sectional study on the prevalence of cognitive impairment and depression. Door-to-door interview technique was assigned in condition with multistage probability random sampling to obtain subjects that represent a population of the Guadalajara metropolitan area (GMA), Mexico. Cognitive function and depression were assessed by applying standardized Mini-Mental State Examination of Folstein (MMSE) and the Geriatric Depression Scale (GDS), respectively. Results. Prevalence of cognitive impairment was 13.8% (14.5% women, 12.6% men); no significant differences by gender and retired or pensioner were found. Prevalence of depression was 29.1% (33.6% women, 21.1% men); no significant differences by retired or pensioner were found. Cognitive impairment was associated with depression (OR  =  3.26, CI 95%, 2.31–4.60). Prevalence of cognitive impairment and depression is associated with: being woman, only in depression being older than 75 years being married, and a low level of education. Conclusion. Cognitive impairment and depression are highly correlated in adults aged ≥60. PMID:23243421

Seroprevalence of Hepatitis B Infection in Nigeria: A National Survey.

PubMed

Olayinka, Adebola T; Oyemakinde, Akin; Balogun, Muhammad S; Ajudua, Anthonia; Nguku, Patrick; Aderinola, Moses; Egwuenu-Oladejo, Abiodun; Ajisegiri, Simeon W; Sha'aibu, Samuel; Musa, Bolanle O P; Gidado, Saheed; Nasidi, Abdulsalami

2016-10-05

Hepatitis B virus (HBV) infection accounts for about 1 million deaths worldwide annually. This study was to determine the prevalence, distribution of HBV, and factors associated with infection in an apparently healthy population in Nigeria. A cross-sectional study among the general population was conducted employing a multistage sampling technique. Data on demographic, social, and behavioral indicators were collected using questionnaires and blood samples tested for HBV seromarkers. Descriptive, bivariate, and multivariate analyses were done. Prevalence of hepatitis B infection was 12.2% (confidence interval [CI] = 10.3-14.5). Of the participants, more than half, 527 (54.6%), had evidence of previous exposure to HBV, while 306 (31.7%) showed no serologic evidence of infection or vaccination. Only 76 (7.9%) participants showed serologic evidence of immunity to HBV through vaccination. Factors associated with testing positive for HBV infection were dental procedure outside the health facility (odds ratios [OR] = 3.4, 95% CI = 1.52-7.70), local circumcision (OR = 1.73, 95% CI = 1.17-2.57), and uvulectomy (OR = 1.65, 95% CI = 1.06-2.57). With logistic regression, only dental procedure outside the health facility (adjusted OR = 3.32, 95% CI = 1.38-7.97) remained significant. This first national survey on seroprevalence of hepatitis B describes the epidemiology and high prevalence of HBV infection in Nigeria and highlights the need for improved vaccination against HBV. © The American Society of Tropical Medicine and Hygiene.

Method of and apparatus for testing the integrity of filters

DOEpatents

Herman, R.L.

1985-05-07

A method of and apparatus are disclosed for testing the integrity of individual filters or filter stages of a multistage filtering system including a diffuser permanently mounted upstream and/or downstream of the filter stage to be tested for generating pressure differentials to create sufficient turbulence for uniformly dispersing trace agent particles within the airstream upstream and downstream of such filter stage. Samples of the particle concentration are taken upstream and downstream of the filter stage for comparison to determine the extent of particle leakage past the filter stage. 5 figs.

Method of and apparatus for testing the integrity of filters

DOEpatents

Herman, Raymond L [Richland, WA

1985-01-01

A method of and apparatus for testing the integrity of individual filters or filter stages of a multistage filtering system including a diffuser permanently mounted upstream and/or downstream of the filter stage to be tested for generating pressure differentials to create sufficient turbulence for uniformly dispersing trace agent particles within the airstream upstream and downstream of such filter stage. Samples of the particle concentration are taken upstream and downstream of the filter stage for comparison to determine the extent of particle leakage past the filter stage.

Methods of and apparatus for testing the integrity of filters

DOEpatents

Herman, R.L.

1984-01-01

A method of and apparatus for testing the integrity of individual filters or filter stages of a multistage filtering system including a diffuser permanently mounted upstream and/or downstream of the filter stage to be tested for generating pressure differentials to create sufficient turbulence for uniformly dispersing trace agent particles within the airstram upstream and downstream of such filter stage. Samples of the particel concentration are taken upstream and downstream of the filter stage for comparison to determine the extent of particle leakage past the filter stage.

[National Health and Nutrition Survey 2012: design and coverage].

PubMed

Romero-Martínez, Martín; Shamah-Levy, Teresa; Franco-Núñez, Aurora; Villalpando, Salvador; Cuevas-Nasu, Lucía; Gutiérrez, Juan Pablo; Rivera-Dommarco, Juan Ángel

2013-01-01

To describe the design and population coverage of the National Health and Nutrition Survey 2012 (NHNS 2012). The design of the NHNS 2012 is reported, as a probabilistic population based survey with a multi-stage and stratified sampling, as well as the sample inferential properties, the logistical procedures, and the obtained coverage. Household response rate for the NHNS 2012 was 87%, completing data from 50,528 households, where 96 031 individual interviews selected by age and 14,104 of ambulatory health services users were also obtained. The probabilistic design of the NHNS 2012 as well as its coverage allowed to generate inferences about health and nutrition conditions, health programs coverage, and access to health services. Because of their complex designs, all estimations from the NHNS 2012 must use the survey design: weights, primary sampling units, and stratus variables.

Rapid resolution liquid chromatography-mass spectrometry and high-performance liquid chromatography-fluorescence detection for metabolism and pharmacokinetic studies of ergosta-4,6,8(14),22-tetraen-3-one.

PubMed

Zhao, Ying-Yong; Qin, Xiang-Yang; Cheng, Xian-Long; Liu, Xue-Ying; Lin, Rui-Chao; Zhang, Yongmin; Li, Xiao-Ye; Sun, Xiao-Li; Sun, Wen-Ji

2010-08-24

Ergosta-4,6,8(14),22-tetraen-3-one (ergone) from many medicinal plants has been demonstrated to possess a variety of pharmacological activities in vivo and in vitro, including cytotoxic, diuretic and immunosuppressive activity. Metabolism and pharmacokinetic studies on rat were conducted for ergone. Rapid resolution liquid chromatography with atmospheric pressure chemical ionization tandem multi-stage mass spectrometry (RRLC-APCI-MS(n)) and high-performance liquid chromatography with fluorescence detection (HPLC-FLD) methods were applied for the identification and quantification of ergone and its metabolite from rat plasma, faeces and urine. A metabolite was identified by RRLC-DAD-APCI-MS(n): 22,23-epoxy-ergosta-4,6,8(14)-triaen-3-one (epoxyergone). The concentrations of the analyte with its metabolites were determined by HPLC-FLD at excitation wavelength of 370 nm and emission wavelength of 485 nm. The samples were deproteinized with methanol after addition of camptothecin as internal standard (IS). The analysis was performed on a Diamonsil C18 column (150 mm x 4.6 mm x 5 microm) with a mobile phase gradient consisting of methanol and water at a flow rate of 1 mL min(-1). The assay was linear over the concentration range of 42-1500, 36-7500 and 42-1500 ng mL(-1) for plasma, faecal homogenate and urine respectively. The absolute recoveries were found to be 97.0+/-1.2%, 98.1+/-0.7% and 96.6+/-1.8% for plasma, faecal homogenate and urine respectively. The intra-day and inter-day relative standard deviations (RSD) were less than 10%. The previous HPLC-MS/MS method is not affordable for most laboratories because of the specialty requirement and high equipment cost. However, the HPLC-FLD method is economic and operating simply for quantitative determination of ergone and its metabolite in rat plasma, faeces and urine. In addition, liquid chromatography coupled with ion trap multi-stage mass spectrometry is becoming a useful technique for ergone metabolite identification. 2010 Elsevier B.V. All rights reserved.

An Investigation on Computer-Adaptive Multistage Testing Panels for Multidimensional Assessment

ERIC Educational Resources Information Center

Wang, Xinrui

2013-01-01

The computer-adaptive multistage testing (ca-MST) has been developed as an alternative to computerized adaptive testing (CAT), and been increasingly adopted in large-scale assessments. Current research and practice only focus on ca-MST panels for credentialing purposes. The ca-MST test mode, therefore, is designed to gauge a single scale. The…

A Fair Comparison of the Performance of Computerized Adaptive Testing and Multistage Adaptive Testing

ERIC Educational Resources Information Center

Wang, Keyin

2017-01-01

The comparison of item-level computerized adaptive testing (CAT) and multistage adaptive testing (MST) has been researched extensively (e.g., Kim & Plake, 1993; Luecht et al., 1996; Patsula, 1999; Jodoin, 2003; Hambleton & Xing, 2006; Keng, 2008; Zheng, 2012). Various CAT and MST designs have been investigated and compared under the same…

A Comparison of IRT Proficiency Estimation Methods under Adaptive Multistage Testing

ERIC Educational Resources Information Center

Kim, Sooyeon; Moses, Tim; Yoo, Hanwook

2015-01-01

This inquiry is an investigation of item response theory (IRT) proficiency estimators' accuracy under multistage testing (MST). We chose a two-stage MST design that includes four modules (one at Stage 1, three at Stage 2) and three difficulty paths (low, middle, high). We assembled various two-stage MST panels (i.e., forms) by manipulating two…

Identifying Differential Item Functioning in Multi-Stage Computer Adaptive Testing

ERIC Educational Resources Information Center

Gierl, Mark J.; Lai, Hollis; Li, Johnson

2013-01-01

The purpose of this study is to evaluate the performance of CATSIB (Computer Adaptive Testing-Simultaneous Item Bias Test) for detecting differential item functioning (DIF) when items in the matching and studied subtest are administered adaptively in the context of a realistic multi-stage adaptive test (MST). MST was simulated using a 4-item…

The Effects of Routing and Scoring within a Computer Adaptive Multi-Stage Framework

ERIC Educational Resources Information Center

Dallas, Andrew

2014-01-01

This dissertation examined the overall effects of routing and scoring within a computer adaptive multi-stage framework (ca-MST). Testing in a ca-MST environment has become extremely popular in the testing industry. Testing companies enjoy its efficiency benefits as compared to traditionally linear testing and its quality-control features over…

Preliminary compressor design study for an advanced multistage axial flow compressor

NASA Technical Reports Server (NTRS)

Marman, H. V.; Marchant, R. D.

1976-01-01

An optimum, axial flow, high pressure ratio compressor for a turbofan engine was defined for commercial subsonic transport service starting in the late 1980's. Projected 1985 technologies were used and applied to compressors with an 18:1 pressure ratio having 6 to 12 stages. A matrix of 49 compressors was developed by statistical techniques. The compressors were evaluated by means of computer programs in terms of various airline economic figures of merit such as return on investment and direct-operating cost. The optimum configuration was determined to be a high speed, 8-stage compressor with an average blading aspect ratio of 1.15.

High-efficiency reconciliation for continuous variable quantum key distribution

NASA Astrophysics Data System (ADS)

Bai, Zengliang; Yang, Shenshen; Li, Yongmin

2017-04-01

Quantum key distribution (QKD) is the most mature application of quantum information technology. Information reconciliation is a crucial step in QKD and significantly affects the final secret key rates shared between two legitimate parties. We analyze and compare various construction methods of low-density parity-check (LDPC) codes and design high-performance irregular LDPC codes with a block length of 106. Starting from these good codes and exploiting the slice reconciliation technique based on multilevel coding and multistage decoding, we realize high-efficiency Gaussian key reconciliation with efficiency higher than 95% for signal-to-noise ratios above 1. Our demonstrated method can be readily applied in continuous variable QKD.

Remote sensing of environmental impact of land use activities

NASA Technical Reports Server (NTRS)

Paul, C. K.

1977-01-01

The capability to monitor land cover, associated in the past with aerial film cameras and radar systems, was discussed in regard to aircraft and spacecraft multispectral scanning sensors. A proposed thematic mapper with greater spectral and spatial resolutions for the fourth LANDSAT is expected to usher in new environmental monitoring capability. In addition, continuing improvements in image classification by supervised and unsupervised computer techniques are being operationally verified for discriminating environmental impacts of human activities on the land. The benefits of employing remote sensing for this discrimination was shown to far outweigh the incremental costs of converting to an aircraft-satellite multistage system.

Fractional Multistage Hydrothermal Liquefaction of Biomass and Catalytic Conversion into Hydrocarbons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cortright, Randy; Rozmiarek, Robert; Dally, Brice

2017-08-31

The objective of this project was to develop an improved multistage process for the hydrothermal liquefaction (HTL) of biomass to serve as a new front-end, deconstruction process ideally suited to feed Virent’s well-proven catalytic technology, which is already being scaled up. This process produced water soluble, partially de-oxygenated intermediates that are ideally suited for catalytic finishing to fungible distillate hydrocarbons. Through this project, Virent, with its partners, demonstrated the conversion of pine wood chips to drop-in hydrocarbon distillate fuels using a multi-stage fractional conversion system that is integrated with Virent’s BioForming® process. The majority of work was in the liquefactionmore » task and included temperature scoping, solvent optimization, and separations.« less

Necessary conditions for the optimality of variable rate residual vector quantizers

NASA Technical Reports Server (NTRS)

Kossentini, Faouzi; Smith, Mark J. T.; Barnes, Christopher F.

1993-01-01

Residual vector quantization (RVQ), or multistage VQ, as it is also called, has recently been shown to be a competitive technique for data compression. The competitive performance of RVQ reported in results from the joint optimization of variable rate encoding and RVQ direct-sum code books. In this paper, necessary conditions for the optimality of variable rate RVQ's are derived, and an iterative descent algorithm based on a Lagrangian formulation is introduced for designing RVQ's having minimum average distortion subject to an entropy constraint. Simulation results for these entropy-constrained RVQ's (EC-RVQ's) are presented for memory less Gaussian, Laplacian, and uniform sources. A Gauss-Markov source is also considered. The performance is superior to that of entropy-constrained scalar quantizers (EC-SQ's) and practical entropy-constrained vector quantizers (EC-VQ's), and is competitive with that of some of the best source coding techniques that have appeared in the literature.

Catalytic multi-stage liquefaction of coal at HTI: Bench-scale studies in coal/waste plastics coprocessing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pradhan, V.R.; Lee, L.K.; Stalzer, R.H.

1995-12-31

The development of Catalytic Multi-Stage Liquefaction (CMSL) at HTI has focused on both bituminous and sub-bituminous coals using laboratory, bench and PDU scale operations. The crude oil equivalent cost of liquid fuels from coal has been curtailed to about $30 per barrel, thus achieving over 30% reduction in the price that was evaluated for the liquefaction technologies demonstrated in the late seventies and early eighties. Contrary to the common belief, the new generation of catalytic multistage coal liquefaction process is environmentally very benign and can produce clean, premium distillates with a very low (<10ppm) heteroatoms content. The HTI Staff hasmore » been involved over the years in process development and has made significant improvements in the CMSL processing of coals. A 24 month program (extended to September 30, 1995) to study novel concepts, using a continuous bench scale Catalytic Multi-Stage unit (30kg coal/day), has been initiated since December, 1992. This program consists of ten bench-scale operations supported by Laboratory Studies, Modelling, Process Simulation and Economic Assessments. The Catalytic Multi-Stage Liquefaction is a continuation of the second generation yields using a low/high temperature approach. This paper covers work performed between October 1994- August 1995, especially results obtained from the microautoclave support activities and the bench-scale operations for runs CMSL-08 and CMSL-09, during which, coal and the plastic components for municipal solid wastes (MSW) such as high density polyethylene (HDPE)m, polypropylene (PP), polystyrene (PS), and polythylene terphthlate (PET) were coprocessed.« less

Prevalence and type of monoclonal gammopathy of undetermined significance in an apparently healthy Nigerian population: a cross sectional study.

PubMed

Onwah, A Lawretta; Adeyemo, Titilope A; Adediran, Adewumi; Ajibola, Sarah O; Akanmu, Alani S

2012-06-28

The prevalence of monoclonal gammopathy of undetermined significance (MGUS), a premalignant plasma-cell disorder has not been determined in our geographic area Nigeria. A cross sectional survey was carried on apparently healthy Nigerians selected by multistage sampling technique from the cosmopolitan city of Lagos, Nigeria. Subjects enrolled into the study had 2-step screening for the presence, type and concentration of monoclonal band. Agarose-gel electrophoresis was performed on all serum samples, and any serum sample with a discrete band of monoclonal protein or thought to have a localized band was subjected to Immunofixation. Subjects were also evaluated for Bence jones proteinuria, haematological and biochemical parameters. Four hundred and ten subjects with a mean age of 45.68 ± 10.3 years, a median of 45.00 years and a range of 20 to 80 years were enrolled into the study. MGUS was identified in only one (0.24 percent) of the 410 study subject. This subject was demonstrated to have a double monoclonal gammopathy; IgGλ at 16.9 g/L and IgAκ at 8.5 g/L. None of them including the sole subject with MGUS had a monoclonal urinary light chain. Among residents of Lagos, Nigeria, MGUS was found in only 0.24% percent of apparently normal persons with a median age of 45 years. This suggests that MGUS which represents the earliest stage of monoclonal plasma/lymphoid cell proliferation is not a common finding in the relatively young population of Nigeria. Future epidemiologic studies dealing with plasma cell disorders in older people are required to carefully examine the relationship between environmental factors and prevalence of MGUS and its ultimate progression to MM.

Development of a Multiple-Stage Differential Mobility Analyzer (MDMA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Da-Ren; Cheng, Mengdawn

2007-01-01

A new DMA column has been designed with the capability of simultaneously extracting monodisperse particles of different sizes in multiple stages. We call this design a multistage DMA, or MDMA. A prototype MDMA has been constructed and experimentally evaluated in this study. The new column enables the fast measurement of particles in a wide size range, while preserving the powerful particle classification function of a DMA. The prototype MDMA has three sampling stages, capable of classifying monodisperse particles of three different sizes simultaneously. The scanning voltage operation of a DMA can be applied to this new column. Each stage ofmore » MDMA column covers a fraction of the entire particle size range to be measured. The covered size fractions of two adjacent stages of the MDMA are designed somewhat overlapped. The arrangement leads to the reduction of scanning voltage range and thus the cycling time of the measurement. The modular sampling stage design of the MDMA allows the flexible configuration of desired particle classification lengths and variable number of stages in the MDMA. The design of our MDMA also permits operation at high sheath flow, enabling high-resolution particle size measurement and/or reduction of the lower sizing limit. Using the tandem DMA technique, the performance of the MDMA, i.e., sizing accuracy, resolution, and transmission efficiency, was evaluated at different ratios of aerosol and sheath flowrates. Two aerosol sampling schemes were investigated. One was to extract aerosol flows at an evenly partitioned flowrate at each stage, and the other was to extract aerosol at a rate the same as the polydisperse aerosol flowrate at each stage. We detail the prototype design of the MDMA and the evaluation result on the transfer functions of the MDMA at different particle sizes and operational conditions.« less

Organizational commitment and intrinsic motivation of regular and contractual primary health care providers

PubMed Central

Kumar, Pawan; Mehra, Anu; Inder, Deep; Sharma, Nandini

2016-01-01

Background: Motivated and committed employees deliver better health care, which results in better outcomes and higher patient satisfaction. Objective: To assess the Organizational Commitment and Intrinsic Motivation of Primary Health Care Providers (HCPs) in New Delhi, India. Materials and Methods: Study was conducted in 2013 on a sample of 333 HCPs who were selected using multistage stage random sampling technique. The sample includes medical officers, auxiliary nurses and midwives, and pharmacists and laboratory technicians/assistants among regular and contractual staff. Data were collected using the pretested structured questionnaire for organization commitment (OC), job satisfiers, and intrinsic job motivation. Analysis was done by using SPSS version 18 and appropriate statistical tests were applied. Results: The mean score for OC for entire regular staff is 1.6 ± 0.39 and contractual staff is 1.3 ± 0.45 which has statistically significant difference (t = 5.57; P = 0.00). In both regular and contractual staff, none of them show high emotional attachment with the organization and does not feel part of the family in the organization. Contractual staff does not feel proud to work in a present organization for rest of their career. Intrinsic motivation is high in both regular and contractual groups but intergroup difference is significant (t = 2.38; P < 0.05). Contractual staff has more dissatisfier than regular, and the difference is significant (P < 0.01). Conclusion: Organizational commitment and intrinsic motivation of contractual staff are lesser than the permanent staff. Appropriate changes are required in the predictors of organizational commitment and factors responsible for satisfaction in the organization to keep the contractual human resource motivated and committed to the organization. PMID:27453851

Relation between childhood experiences and adults' self-esteem: A sample from Baghdad.

PubMed

AlShawi, Ameel F; Lafta, Riyadh K

2014-01-01

Adverse childhood experiences are associated with significant functional impairments and loss of life in adolescence and adulthood. Literature documents the conversion of traumatic emotional experiences in childhood into psychological disorders later in life. The family is one of the most critical risks and resilient factors for mental health in adolescence and emerging adulthood. To estimate the effect of childhood experiences on self-esteem during adulthood in a sample from Baghdad city. This cross-sectional study was conducted in Baghdad city during the period from January 2013 through to January 2014. Multistage sampling techniques were used to choose 13 primary healthcare centers and eight colleges from three universities in Baghdad. Childhood experiences were measured by applying a modified standardized Adverse Childhood Experiences International Questionnaire (ACE-IQ) form. A total of 1040 subjects were surveyed and 1000 responded giving a response rate of 96.2%. The results revealed that 82.7% of the participants were confident within themselves, 14.9% (149) reported to feel a failure, while 28.3% of subjects expressed feeling useless at times. The score for family bonding is expected to significantly increase the score for self-esteem by a mean of 21.48. University, diploma and higher education are expected to significantly decrease the self-esteem score by a mean of - 6.31 compared to those with less than secondary school education. Parents education show statistically insignificant association with the mean score for self-esteem. The findings of this study give an insight into the essential role of childhood experiences in building self-esteem and adaptation later in their life. National health programs are suggested for intervention targeting early adverse childhood experiences and their consequences.

Protocol for Reliability Assessment of Structural Health Monitoring Systems Incorporating Model-assisted Probability of Detection (MAPOD) Approach

DTIC Science & Technology

2011-09-01

a quality evaluation with limited data, a model -based assessment must be...that affect system performance, a multistage approach to system validation, a modeling and experimental methodology for efficiently addressing a ...affect system performance, a multistage approach to system validation, a modeling and experimental methodology for efficiently addressing a wide range

A Multi-Stage Longitudinal Comparative Design Stage II Evaluation of the Changing Lives Program: The Life Course Interview (RDA-LCI)

ERIC Educational Resources Information Center

Arango, Lisa Lewis; Kurtines, William M.; Montgomery, Marilyn J.; Ritchie, Rachel

2008-01-01

The study reported in this article, a Multi-Stage Longitudinal Comparative Design Stage II evaluation conducted as a planned preliminary efficacy evaluation (psychometric evaluation of measures, short-term controlled outcome studies, etc.) of the Changing Lives Program (CLP), provided evidence for the reliability and validity of the qualitative…

Interaction between Gaming and Multistage Guiding Strategies on Students' Field Trip Mobile Learning Performance and Motivation

ERIC Educational Resources Information Center

Chen, Chih-Hung; Liu, Guan-Zhi; Hwang, Gwo-Jen

2016-01-01

In this study, an integrated gaming and multistage guiding approach was proposed for conducting in-field mobile learning activities. A mobile learning system was developed based on the proposed approach. To investigate the interaction between the gaming and guiding strategies on students' learning performance and motivation, a 2 × 2 experiment was…

Suicide Prevention among High School Students: Evaluation of a Nonrandomized Trial of a Multi-Stage Suicide Screening Program

ERIC Educational Resources Information Center

Torcasso, Gina; Hilt, Lori M.

2017-01-01

Background: Suicide is a leading cause of death among youth. Suicide screening programs aim to identify mental health issues and prevent death by suicide. Objective: The present study evaluated outcomes of a multi-stage screening program implemented over 3 school years in a moderately-sized Midwestern high school. Methods: One hundred ninety-three…

Multi-stage flash degaser

DOEpatents

Rapier, Pascal M.

1982-01-01

A multi-stage flash degaser (18) is incorporated in an energy conversion system (10) having a direct-contact, binary-fluid heat exchanger to remove essentially all of the noncondensable gases from geothermal brine ahead of the direct-contact binary-fluid heat exchanger (22) in order that the heat exchanger (22) and a turbine (48) and condenser (32) of the system (10) can operate at optimal efficiency.

Design of the South East Asian Nutrition Survey (SEANUTS): a four-country multistage cluster design study.

PubMed

Schaafsma, Anne; Deurenberg, Paul; Calame, Wim; van den Heuvel, Ellen G H M; van Beusekom, Christien; Hautvast, Jo; Sandjaja; Bee Koon, Poh; Rojroongwasinkul, Nipa; Le Nguyen, Bao Khanh; Parikh, Panam; Khouw, Ilse

2013-09-01

Nutrition is a well-known factor in the growth, health and development of children. It is also acknowledged that worldwide many people have dietary imbalances resulting in over- or undernutrition. In 2009, the multinational food company FrieslandCampina initiated the South East Asian Nutrition Survey (SEANUTS), a combination of surveys carried out in Indonesia, Malaysia, Thailand and Vietnam, to get a better insight into these imbalances. The present study describes the general study design and methodology, as well as some problems and pitfalls encountered. In each of these countries, participants in the age range of 0·5-12 years were recruited according to a multistage cluster randomised or stratified random sampling methodology. Field teams took care of recruitment and data collection. For the health status of children, growth and body composition, physical activity, bone density, and development and cognition were measured. For nutrition, food intake and food habits were assessed by questionnaires, whereas in subpopulations blood and urine samples were collected to measure the biochemical status parameters of Fe, vitamins A and D, and DHA. In Thailand, the researchers additionally studied the lipid profile in blood, whereas in Indonesia iodine excretion in urine was analysed. Biochemical data were analysed in certified laboratories. Study protocols and methodology were aligned where practically possible. In December 2011, data collection was finalised. In total, 16,744 children participated in the present study. Information that will be very relevant for formulating nutritional health policies, as well as for designing innovative food and nutrition research and development programmes, has become available.

Health and human rights in Chin State, Western Burma: a population-based assessment using multistaged household cluster sampling.

PubMed

Sollom, Richard; Richards, Adam K; Parmar, Parveen; Mullany, Luke C; Lian, Salai Bawi; Iacopino, Vincent; Beyrer, Chris

2011-02-08

The Chin State of Burma (also known as Myanmar) is an isolated ethnic minority area with poor health outcomes and reports of food insecurity and human rights violations. We report on a population-based assessment of health and human rights in Chin State. We sought to quantify reported human rights violations in Chin State and associations between these reported violations and health status at the household level. Multistaged household cluster sampling was done. Heads of household were interviewed on demographics, access to health care, health status, food insecurity, forced displacement, forced labor, and other human rights violations during the preceding 12 months. Ratios of the prevalence of household hunger comparing exposed and unexposed to each reported violation were estimated using binomial regression, and 95% confidence intervals (CIs) were constructed. Multivariate models were done to adjust for possible confounders. Overall, 91.9% of households (95% CI 89.7%-94.1%) reported forced labor in the past 12 months. Forty-three percent of households met FANTA-2 (Food and Nutrition Technical Assistance II project) definitions for moderate to severe household hunger. Common violations reported were food theft, livestock theft or killing, forced displacement, beatings and torture, detentions, disappearances, and religious and ethnic persecution. Self reporting of multiple rights abuses was independently associated with household hunger. Our findings indicate widespread self-reports of human rights violations. The nature and extent of these violations may warrant investigation by the United Nations or International Criminal Court. Please see later in the article for the Editors' Summary.

Health and Human Rights in Chin State, Western Burma: A Population-Based Assessment Using Multistaged Household Cluster Sampling

PubMed Central

Sollom, Richard; Richards, Adam K.; Parmar, Parveen; Mullany, Luke C.; Lian, Salai Bawi; Iacopino, Vincent; Beyrer, Chris

2011-01-01

Background The Chin State of Burma (also known as Myanmar) is an isolated ethnic minority area with poor health outcomes and reports of food insecurity and human rights violations. We report on a population-based assessment of health and human rights in Chin State. We sought to quantify reported human rights violations in Chin State and associations between these reported violations and health status at the household level. Methods and Findings Multistaged household cluster sampling was done. Heads of household were interviewed on demographics, access to health care, health status, food insecurity, forced displacement, forced labor, and other human rights violations during the preceding 12 months. Ratios of the prevalence of household hunger comparing exposed and unexposed to each reported violation were estimated using binomial regression, and 95% confidence intervals (CIs) were constructed. Multivariate models were done to adjust for possible confounders. Overall, 91.9% of households (95% CI 89.7%–94.1%) reported forced labor in the past 12 months. Forty-three percent of households met FANTA-2 (Food and Nutrition Technical Assistance II project) definitions for moderate to severe household hunger. Common violations reported were food theft, livestock theft or killing, forced displacement, beatings and torture, detentions, disappearances, and religious and ethnic persecution. Self reporting of multiple rights abuses was independently associated with household hunger. Conclusions Our findings indicate widespread self-reports of human rights violations. The nature and extent of these violations may warrant investigation by the United Nations or International Criminal Court. Please see later in the article for the Editors' Summary PMID:21346799

Stator Indexing in Multistage Compressors

NASA Technical Reports Server (NTRS)

Barankiewicz, Wendy S.

1997-01-01

The relative circumferential location of stator rows (stator indexing) is an aspect of multistage compressor design that has not yet been explored for its potential impact on compressor aerodynamic performance. Although the inlet stages of multistage compressors usually have differing stator blade counts, the aft stages of core compressors can often have stage blocks with equal stator blade counts in successive stages. The potential impact of stator indexing is likely greatest in these stages. To assess the performance impact of stator indexing, researchers at the NASA Lewis Research Center used the 4 ft diameter, four-stage NASA Low Speed Axial Compressor for detailed experiments. This compressor has geometrically identical stages that can circumferentially index stator rows relative to each other in a controlled manner; thus it is an ideal test rig for such investigations.

Calculation of recovery plasticity in multistage hot forging under isothermal conditions.

PubMed

Zhbankov, Iaroslav G; Perig, Alexander V; Aliieva, Leila I

2016-01-01

A widely used method for hot forming steels and alloys, especially heavy forging, is the process of multistage forging with pauses between stages. The well-known effect which accompanies multistage hot forging is metal plasticity recovery in comparison with monotonic deformation. A method which takes into consideration the recovery of plasticity in pauses between hot deformations of a billet under isothermal conditions is proposed. This method allows the prediction of billet forming limits as a function of deformation during the forging stage and the duration of the pause between the stages. This method takes into account the duration of pauses between deformations and the magnitude of subdivided deformations. A hot isothermal upsetting process with pauses was calculated by the proposed method. Results of the calculations have been confirmed with experimental data.

Republic of Georgia estimates for prevalence of drug use: Randomized response techniques suggest under-estimation.

PubMed

Kirtadze, Irma; Otiashvili, David; Tabatadze, Mzia; Vardanashvili, Irina; Sturua, Lela; Zabransky, Tomas; Anthony, James C

2018-06-01

Validity of responses in surveys is an important research concern, especially in emerging market economies where surveys in the general population are a novelty, and the level of social control is traditionally higher. The Randomized Response Technique (RRT) can be used as a check on response validity when the study aim is to estimate population prevalence of drug experiences and other socially sensitive and/or illegal behaviors. To apply RRT and to study potential under-reporting of drug use in a nation-scale, population-based general population survey of alcohol and other drug use. For this first-ever household survey on addictive substances for the Country of Georgia, we used the multi-stage probability sampling of 18-to-64-year-old household residents of 111 urban and 49 rural areas. During the interviewer-administered assessments, RRT involved pairing of sensitive and non-sensitive questions about drug experiences. Based upon the standard household self-report survey estimate, an estimated 17.3% [95% confidence interval, CI: 15.5%, 19.1%] of Georgian household residents have tried cannabis. The corresponding RRT estimate was 29.9% [95% CI: 24.9%, 34.9%]. The RRT estimates for other drugs such as heroin also were larger than the standard self-report estimates. We remain unsure about what is the "true" value for prevalence of using illegal psychotropic drugs in the Republic of Georgia study population. Our RRT results suggest that standard non-RRT approaches might produce 'under-estimates' or at best, highly conservative, lower-end estimates. Copyright © 2018 Elsevier B.V. All rights reserved.

State-space self-tuner for on-line adaptive control

NASA Technical Reports Server (NTRS)

Shieh, L. S.

1994-01-01

Dynamic systems, such as flight vehicles, satellites and space stations, operating in real environments, constantly face parameter and/or structural variations owing to nonlinear behavior of actuators, failure of sensors, changes in operating conditions, disturbances acting on the system, etc. In the past three decades, adaptive control has been shown to be effective in dealing with dynamic systems in the presence of parameter uncertainties, structural perturbations, random disturbances and environmental variations. Among the existing adaptive control methodologies, the state-space self-tuning control methods, initially proposed by us, are shown to be effective in designing advanced adaptive controllers for multivariable systems. In our approaches, we have embedded the standard Kalman state-estimation algorithm into an online parameter estimation algorithm. Thus, the advanced state-feedback controllers can be easily established for digital adaptive control of continuous-time stochastic multivariable systems. A state-space self-tuner for a general multivariable stochastic system has been developed and successfully applied to the space station for on-line adaptive control. Also, a technique for multistage design of an optimal momentum management controller for the space station has been developed and reported in. Moreover, we have successfully developed various digital redesign techniques which can convert a continuous-time controller to an equivalent digital controller. As a result, the expensive and unreliable continuous-time controller can be implemented using low-cost and high performance microprocessors. Recently, we have developed a new hybrid state-space self tuner using a new dual-rate sampling scheme for on-line adaptive control of continuous-time uncertain systems.

Characteristics of Boundary Layer Transition in a Multi-Stage Low-Pressure Turbine

NASA Technical Reports Server (NTRS)

Wisler, Dave; Halstead, David E.; Okiishi, Ted

2007-01-01

An experimental investigation of boundary layer transition in a multi-stage turbine has been completed using surface-mounted hot-film sensors. Tests were carried out using the two-stage Low Speed Research Turbine of the Aerodynamics Research Laboratory of GE Aircraft Engines. Blading in this facility models current, state-of-the-art low pressure turbine configurations. The instrumentation technique involved arrays of densely-packed hot-film sensors on the surfaces of second stage rotor and nozzle blades. The arrays were located at mid-span on both the suction and pressure surfaces. Boundary layer measurements were acquired over a complete range of relevant Reynolds numbers. Data acquisition capabilities provided means for detailed data interrogation in both time and frequency domains. Data indicate that significant regions of laminar and transitional boundary layer flow exist on the rotor and nozzle suction surfaces. Evidence of relaminarization both near the leading edge of the suction surface and along much of the pressure surface was observed. Measurements also reveal the nature of the turbulent bursts occuring within and between the wake segments convecting through the blade row. The complex character of boundary layer transition resulting from flow unsteadiness due to nozzle/nozzle, rotor/nozzle, and nozzle/rotor wake interactions are elucidated using these data. These measurements underscore the need to provide turbomachinery designers with models of boundary layer transition to facilitate accurate prediction of aerodynamic loss and heat transfer.

Isolation of >1 nm Diameter Single-Wall Carbon Nanotube Species Using Aqueous Two-Phase Extraction.

PubMed

Fagan, Jeffrey A; Hároz, Erik H; Ihly, Rachelle; Gui, Hui; Blackburn, Jeffrey L; Simpson, Jeffrey R; Lam, Stephanie; Hight Walker, Angela R; Doorn, Stephen K; Zheng, Ming

2015-05-26

In this contribution we demonstrate the effective separation of single-wall carbon nanotube (SWCNT) species with diameters larger than 1 nm through multistage aqueous two-phase extraction (ATPE), including isolation at the near-monochiral species level up to at least the diameter range of SWCNTs synthesized by electric arc synthesis (1.3-1.6 nm). We also demonstrate that refined species are readily obtained from both the metallic and semiconducting subpopulations of SWCNTs and that this methodology is effective for multiple SWCNT raw materials. Using these data, we report an empirical function for the necessary surfactant concentrations in the ATPE method for separating different SWCNTs into either the lower or upper phase as a function of SWCNT diameter. This empirical correlation enables predictive separation design and identifies a subset of SWCNTs that behave unusually as compared to other species. These results not only dramatically increase the range of SWCNT diameters to which species selective separation can be achieved but also demonstrate that aqueous two-phase separations can be designed across experimentally accessible ranges of surfactant concentrations to controllably separate SWCNT populations of very small (∼0.62 nm) to very large diameters (>1.7 nm). Together, the results reported here indicate that total separation of all SWCNT species is likely feasible by the ATPE method, especially given future development of multistage automated extraction techniques.

A New Finite Difference Q-compensated RTM Algorithm in Tilted Transverse Isotropic (TTI) Media

NASA Astrophysics Data System (ADS)

Zhou, T.; Hu, W.; Ning, J.

2017-12-01

Attenuating anisotropic geological body is difficult to image with conventional migration methods. In such kind of scenarios, recorded seismic data suffer greatly from both amplitude decay and phase distortion, resulting in degraded resolution, poor illumination and incorrect migration depth in imaging results. To efficiently obtain high quality images, we propose a novel TTI QRTM algorithm based on Generalized Standard Linear Solid model combined with a unique multi-stage optimization technique to simultaneously correct the decayed amplitude and the distorted phase velocity. Numerical tests (shown in the figure) demonstrate that our TTI QRTM algorithm effectively corrects migration depth, significantly improves illumination, and enhances resolution within and below the low Q regions. The result of our new method is very close to the reference RTM image, while QRTM without TTI cannot get a correct image. Compared to the conventional QRTM method based on a pseudo-spectral operator for fractional Laplacian evaluation, our method is more computationally efficient for large scale applications and more suitable for GPU acceleration. With the current multi-stage dispersion optimization scheme, this TTI QRTM method best performs in the frequency range 10-70 Hz, and could be used in a wider frequency range. Furthermore, as this method can also handle frequency dependent Q, it has potential to be applied in imaging deep structures where low Q exists, such as subduction zones, volcanic zones or fault zones with passive source observations.

Age mapping and dating of monazite on the electron microprobe: Deconvoluting multistage tectonic histories

NASA Astrophysics Data System (ADS)

Williams, Michael L.; Jercinovic, Michael J.; Terry, Michael P.

1999-11-01

High-resolution X-ray mapping and dating of monazite on the electron microprobe are powerful geochronological tools for structural, metamorphic, and tectonic analysis. X-ray maps commonly show complex Th, U, and Pb zoning that reflects monazite growth and overgrowth events. Age maps constructed from the X-ray maps simplify the zoning and highlight age domains. Microprobe dating offers a rapid, in situ method for estimating ages of mapped domains. Application of these techniques has placed new constraints on the tectonic history of three areas. In western Canada, age mapping has revealed multiphase monazite, with older cores and younger rims, included in syntectonic garnet. Microprobe ages show that tectonism occurred ca. 1.9 Ga, 700 m.y. later than mylonitization in the adjacent Snowbird tectonic zone. In New Mexico, age mapping and dating show that the dominant fabric and triple-point metamorphism occurred during a 1.4 Ga reactivation, not during the 1.7 Ga Yavapai-Mazatzal orogeny. In Norway, monazite inclusions in garnet constrain high-pressure metamorphism to ca. 405 Ma, and older cores indicate a previously unrecognized component of ca. 1.0 Ga monazite. In all three areas, microprobe dating and age mapping have provided a critical textural context for geochronologic data and a better understanding of the complex age spectra of these multistage orogenic belts.

A multistage selective weighting method for improved microwave breast tomography.

PubMed

Shahzad, Atif; O'Halloran, Martin; Jones, Edward; Glavin, Martin

2016-12-01

Microwave tomography has shown potential to successfully reconstruct the dielectric properties of the human breast, thereby providing an alternative to other imaging modalities used in breast imaging applications. Considering the costly forward solution and complex iterative algorithms, computational complexity becomes a major bottleneck in practical applications of microwave tomography. In addition, the natural tendency of microwave inversion algorithms to reward high contrast breast tissue boundaries, such as the skin-adipose interface, usually leads to a very slow reconstruction of the internal tissue structure of human breast. This paper presents a multistage selective weighting method to improve the reconstruction quality of breast dielectric properties and minimize the computational cost of microwave breast tomography. In the proposed two stage approach, the skin layer is approximated using scaled microwave measurements in the first pass of the inversion algorithm; a numerical skin model is then constructed based on the estimated skin layer and the assumed dielectric properties of the skin tissue. In the second stage of the algorithm, the skin model is used as a priori information to reconstruct the internal tissue structure of the breast using a set of temporal scaling functions. The proposed method is evaluated on anatomically accurate MRI-derived breast phantoms and a comparison with the standard single-stage technique is presented. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Research on Aero-Thermodynamic Distortion Induced Structural Dynamic Response of Multi-Stage Compressor Blading.

DTIC Science & Technology

1988-01-15

However. only very engineering limited experimental data exists to assess the Director, Thermal Sciences and range of validity and to direct the... experimental results of Goldstein et. al. "A 1111 and also the Navier Stokes numerical solutions of Morihara 1121. Diffuser The predicted stream function...Unsteady Aerodynamic Interactions in a Multistage Compressor............................................................ 53 I APPENDIX VI. Experimental

Body Mass and Circumference of Upper Arm Are Associated with Race Performance in Ultraendurance Runners in a Multistage Race--The Isarrun 2006

ERIC Educational Resources Information Center

Knechtle, Beat; Duff, Brida; Welzel, Ulrich; Kohler, Gotz

2009-01-01

In the present study, we investigated the association of anthropometric parameters with race performance in ultraendurance runners in a multistage ultraendurance run, in which athletes had to run 338 km within 5 consecutive days. In 17 male successful finishers, calculations of body mass, body height, skinfold thicknesses, extremity circumference,…

Multistage aerospace craft. [perspective drawings of conceptual design

NASA Technical Reports Server (NTRS)

Kelly, D. L. (Inventor)

1973-01-01

A conceptual design of a multi-stage aerospace craft is presented. Two perspective views of the vehicle are developed to show the two component configuration with delta wing, four vertical tail surfaces, tricycle landing gear, and two rocket exhaust nozzles at the rear of the fuselage. Engines for propulsion in the atmosphere are mounted on the fuselage in front of the wing root attachment.

Preliminary Experience with High Response Pressure Measurements in a Multistage, High Speed Compressor

DTIC Science & Technology

1988-05-01

MEASUREMENTS IN A MULTISTAGE, HIGH SPEED COMPRESSOR by M. A. Cherrett J. D. Bryce SUMMARY The investigation of unsteady aerodynamic phenomena within high...X Vli 1. Siurii-nue. Initials 9Ia. Author 2 9b. Authors 3. 4 ... 10. Date l’ag,- ReI\\ ’ Cherrett , M.A. Bryce, J.D. May i 4 1988 4 It I

The task of validation of gas-dynamic characteristics of a multistage centrifugal compressor for a natural gas booster compressor station

NASA Astrophysics Data System (ADS)

Danilishin, A. M.; Kozhukhov, Y. V.; Neverov, V. V.; Malev, K. G.; Mironov, Y. R.

2017-08-01

The aim of this work is the validation study for the numerical modeling of characteristics of a multistage centrifugal compressor for natural gas. In the research process was the analysis used grid interfaces and software systems. The result revealed discrepancies between the simulated and experimental characteristics and outlined the future work plan.

Lead oxide-decorated graphene oxide/epoxy composite towards X-Ray radiation shielding

NASA Astrophysics Data System (ADS)

Hashemi, Seyyed Alireza; Mousavi, Seyyed Mojtaba; Faghihi, Reza; Arjmand, Mohammad; Sina, Sedigheh; Amani, Ali Mohammad

2018-05-01

In this study, employing modified Hummers method coupled with a multi-stage manufacturing procedure, graphene oxide (GO) decorated with Pb3O4 (GO-Pb3O4) at different weight ratios was synthesized. Thereupon, via the vacuum shock technique, composites holding GO-Pb3O4 at different filler loadings (5 and 10 wt%) and thicknesses (4 and 6 mm) were fabricated. Successful decoration of GO with Pb3O4 was confirmed via FTIR analysis. Moreover, particle size distribution of the produced fillers was examined using particle size analyzer. X-ray attenuation examination revealed that reinforcement of epoxy-based composites with GO-Pb3O4 led to a significant improvement in the overall attenuation rate of X-ray beam. For instance, composites containing 10 wt% GO-Pb3O4 with 6 mm thickness showed 4.06, 4.83 and 3.91 mm equivalent aluminum thickness at 40, 60 and 80 kVp energies, denoting 124.3, 124.6 and 103.6% improvement in the X-ray attenuation rate compared to a sample holding neat epoxy resin, respectively. Simulation results revealed that the effect of GO-Pb3O4 loading on the X-ray shielding performance undermined with increase in the voltage of the applied X-ray beam.

Prevalence of Dementia, Emotional State and Physical Performance among Older Adults in the Metropolitan Area of Guadalajara, Jalisco, Mexico

PubMed Central

Velázquez-Brizuela, Irma E.; Ortiz, Genaro G.; Ventura-Castro, Lucia; Árias-Merino, Elva D.; Pacheco-Moisés, Fermín P.; Macías-Islas, Miguel A.

2014-01-01

Background. Dementia affects memory, thinking, language, judgment, and behavior. Depression, is common in older adults with dementia. The concomitance of dementia and depression increases disability with impaired activities of daily living (ADL), increasing the chances of institutionalization and mortality. Methods. Cross-sectional study of a population 60 years and older who live in the State of Jalisco, Mexico. A total of 1142 persons were assessed regarding their cognitive function, emotional state, and physical performance. Door-to-door interview technique was assigned in condition with multistage probability random sampling. Cognitive function, depression and functional disability were assessed by applying standardized Minimental State Examination (Folstein), Geriatric Depression Scale, and the Katz index, respectively. Diagnosis of dementia was performed according to the criteria of the Diagnostic and Statistical Manual of Mental Disorders, the Fourth Edition. Data were analyzed using SPSS software. Results. Prevalence of demency was 9.5% (63.35% women, and 36.7% men). Demency was associated with being woman, being older than 70 years, low level of education, not having the economic benefit of retirement, being single or living without a partner, low level of education, suffering from depression and have functional disability in ADL. Conclusion. Dementia is more common in women and is related to depression and disability. PMID:24795758

Condom use at first and latest sexual events among young people: evidence from a rural and peri-urban setting in Uganda.

PubMed

Tumwesigye, N M; Ingham, R; Holmes, D

2013-06-01

Condom use remains low among young people despite high prevalence of HIV, STIs, and unplanned pregnancy in Uganda. This paper presents patterns of condom use at first and latest sexual events and associated factors. The data were obtained from 445 sexually active unmarried people aged 15-24 from one peri-urban and another rural district. Stratified multi-stage cluster sampling technique was applied. Logistic regression was used to identify factors associated with condom use at each of the two sexual events, while multinomial logistic regression was used to establish factors correlated with condom use at both first and last sex. Factors associated with condom use at each event were residence in the peri-urban district and higher education attainment. Factors correlated with condom use at both first and last sex were residence in peri-urban district (p<0.001) and being in school (p<0.01). Alcohol consumption and age at first sex were only significant at one event. Some factors that influence condom use at first sex are different from those that affect condom use at latest sexual event. Prevention programmes against STIs, HIV and unplanned pregnancies among young people focus more on rural areas and those with minimal or no education.

Prevalence of Dementia, Emotional State and Physical Performance among Older Adults in the Metropolitan Area of Guadalajara, Jalisco, Mexico.

PubMed

Velázquez-Brizuela, Irma E; Ortiz, Genaro G; Ventura-Castro, Lucia; Arias-Merino, Elva D; Pacheco-Moisés, Fermín P; Macías-Islas, Miguel A

2014-01-01

Background. Dementia affects memory, thinking, language, judgment, and behavior. Depression, is common in older adults with dementia. The concomitance of dementia and depression increases disability with impaired activities of daily living (ADL), increasing the chances of institutionalization and mortality. Methods. Cross-sectional study of a population 60 years and older who live in the State of Jalisco, Mexico. A total of 1142 persons were assessed regarding their cognitive function, emotional state, and physical performance. Door-to-door interview technique was assigned in condition with multistage probability random sampling. Cognitive function, depression and functional disability were assessed by applying standardized Minimental State Examination (Folstein), Geriatric Depression Scale, and the Katz index, respectively. Diagnosis of dementia was performed according to the criteria of the Diagnostic and Statistical Manual of Mental Disorders, the Fourth Edition. Data were analyzed using SPSS software. Results. Prevalence of demency was 9.5% (63.35% women, and 36.7% men). Demency was associated with being woman, being older than 70 years, low level of education, not having the economic benefit of retirement, being single or living without a partner, low level of education, suffering from depression and have functional disability in ADL. Conclusion. Dementia is more common in women and is related to depression and disability.

Child marriage and maternal health risks among young mothers in Gombi, Adamawa State, Nigeria: implications for mortality, entitlements and freedoms.

PubMed

Adedokun, Olaide; Adeyemi, Oluwagbemiga; Dauda, Cholli

2016-12-01

Efforts toward liberation of the girl-child from the shackles of early marriage have continued to be resisted through tradition, culture and religion in some parts of Nigeria. This study therefore examines the maternal health implications of early marriage on young mothers in the study area. Multistage sampling technique was employed to obtained data from 200 young mothers aged 15-24 years who married before aged 16 years. The study reveals that more than 60% had only primary education while more than 70% had experienced complications before or after childbirth. Age at first marriage, current age, level of education and household decision-making significantly influence (P<0.005) maternal health risks in the study area. The study establishes that respondents in age group 15-19 years are 1.234 times more likely to experience complications when compared with the reference category 20-24 years. Entitlements and freedom that are highly relevant to reduction of maternal mortality, provided by international treaties are inaccessible to young women in the study area. Strategies to end child marriage in the study area should include mass and compulsory education of girls, provision of other options to early marriage and childbearing and involvement of fathers in preventing and ending the practice.

The Exoplanet Simple Orbit Fitting Toolbox (ExoSOFT): An Open-source Tool for Efficient Fitting of Astrometric and Radial Velocity Data

NASA Astrophysics Data System (ADS)

Mede, Kyle; Brandt, Timothy D.

2017-03-01

We present the Exoplanet Simple Orbit Fitting Toolbox (ExoSOFT), a new, open-source suite to fit the orbital elements of planetary or stellar-mass companions to any combination of radial velocity and astrometric data. To explore the parameter space of Keplerian models, ExoSOFT may be operated with its own multistage sampling approach or interfaced with third-party tools such as emcee. In addition, ExoSOFT is packaged with a collection of post-processing tools to analyze and summarize the results. Although only a few systems have been observed with both radial velocity and direct imaging techniques, this number will increase, thanks to upcoming spacecraft and ground-based surveys. Providing both forms of data enables simultaneous fitting that can help break degeneracies in the orbital elements that arise when only one data type is available. The dynamical mass estimates this approach can produce are important when investigating the formation mechanisms and subsequent evolution of substellar companions. ExoSOFT was verified through fitting to artificial data and was implemented using the Python and Cython programming languages; it is available for public download at https://github.com/kylemede/ExoSOFT under GNU General Public License v3.

Prevalence of depression among a population aged over 45 years in Chiang Mai, Thailand.

PubMed

Wangtongkum, Suparus; Sucharitakul, Phongsakorn; Wongjaroen, Sriwanna; Maneechompoo, Suthin

2008-12-01

To determine the prevalence of depression in Thai people of 45 years and over. The presented project was a cross sectional study on the prevalence of depression and cognitive impairment in Chiang Mai. Door-to-door interview technique was assigned in condition with multistage probability random sampling to obtain subjects that represent a population of Chiang Mai. The research was conducted between October 2004 and September 2005. Data were collected on subject that were 45 years old and over. All subjects were selected from all districts in Chiang Mai. Thai Mini Mental State Examination (TMSE) and Thai Beck Depression Inventory (BDI) were used as the assessment tool If the subjects had a TMSE score less than 24 points, it was assumed as a cognitive impairment. One thousand four hundred ninety two people, 610 males and 882 females, were enrolled in the present study. Their mean age was 59.7 +/- 10.4 years (45-88 year). The prevalence of depression only was 29.2%, the prevalence of cognitive impairment only was 5.63% and the prevalence of cognitive impairment with depression was 3.96%. The prevalence of depression increased with age. The prevalence of depression in Thai people of 45 years and over was 29.2% and increased with age.

Perceived barriers and attitudes of health care providers towards Provider-Initiated HIV Testing and Counseling in Mbeya region, southern highland zone of Tanzania.

PubMed

Ntuli, A Kapologwe; Kabengula, Julieth S; Msuya, Sia E

2011-01-01

Provider-initiated testing and counseling (PITC) is a routine HIV testing and counseling, it encompases two strategies including; diagnostic HIV testing and HIV screening. In Tanzania PITC started in 2007, to date it is almost through out the country. This study aimed at assessing the perceived barriers and attitudes of health care providers towards PITC services. A cross sectional study was conducted for one month between April and May, 2010 in the goverment health care facilities of the Mbeya City Council. A multi-stage sampling technique was used to select both health facilities and health care providers. A total of 402 (95%) subjects were interviewed. Their mean (±SD) age was 41±9.5 years, where majority (65%) were females. All the participants reported to be aware about PITC services. However, about 35% of them had negative attitude towards PITC services. Various perceived barriers to effective PITC provision were reported, including; too many patients (57.7%) and inadequate space (46%) for PITC provision. Although PITC is an effective strategy for identification of unrecognized HIV infections, there is still missed opportunity which occurs at the health facilities, as some of health care providers had negative attitude and others faces various barriers in offering the PITC service.

The Hispanic Americans Baseline Alcohol Survey (HABLAS): the association between birthplace, acculturation and alcohol abuse and dependence across Hispanic national groups.

PubMed

Caetano, Raul; Ramisetty-Mikler, Suhasini; Rodriguez, Lori A

2009-01-01

Hispanics are heterogeneous in national origin, evidenced by wide ranges of alcohol abuse and dependence rates across different Hispanic national groups. This paper examines associations between 12-month rates of DSM-IV alcohol abuse and dependence with birthplace and acculturation. The 2006 Hispanic Americans Baseline Alcohol Survey, using a multistage cluster sample design, interviewed 5224 adults (18+ years) in five selected U.S. metropolitan areas: Miami, New York, Philadelphia, Houston, and Los Angeles. Comprehensive data on drinking behavior were collected and the analyses include bivariate and multivariate regression techniques. Alcohol abuse and dependence rates were higher among U.S.-born Puerto Ricans and South/Central Americans compared to their foreign-born counterparts, while no such differences were found for Cuban and Mexican Americans. Overall, those with higher acculturation report higher rates of abuse and dependence (statistically significant only for abuse among Puerto Ricans). Risk factors for abuse include being male and being in the high acculturation group. Risk factors for dependence include being male, being Puerto Rican or Mexican American, having less than a college education, and being U.S.-born. Hispanics were found to share several common risk factors with the larger U.S. population for abuse and dependence, such as male gender, lower education, and lower income.

Climate change adaptation: a panacea for food security in Ondo State, Nigeria

NASA Astrophysics Data System (ADS)

Fatuase, A. I.

2017-08-01

This paper examines the likely perceived causes of climate change, adaptation strategies employed and technical inefficiency of arable crop farmers in Ondo State, Nigeria. Data were obtained from primary sources using a set of structured questionnaire assisted with interview schedule. Multistage sampling technique was used. Data were analyzed using the following: descriptive statistics and the stochastic frontier production function. The findings showed that majority of the respondents (59.1 %) still believed that climate change is a natural phenomenon that is beyond man's power to abate while industrial release, improper sewage disposal, fossil fuel use, deforestation and bush burning were perceived as the most human factors that influence climate change by the category that chose human activities (40.9 %) as the main causes of climate change. The main employed adaptation strategies by the farmers were mixed cropping, planting early matured crop, planting of resistant crops and use of agrochemicals. The arable crop farmers were relatively technically efficient with about 53 % of them having technical efficiency above the average of 0.784 for the study area. The study observed that education, adaptation, perception, climate information and farming experience were statistically significant in decreasing inefficiency of arable crop production. Therefore, advocacy on climate change and its adaptation strategies should be intensified in the study area.

Prevalence of Facebook Addiction and Related Factors Among Thai High School Students.

PubMed

Khumsri, Jiraporn; Yingyeun, Rungmanee; Mereerat Manwong; Hanprathet, Nitt; Phanasathit, Muthita

2015-04-01

To determine the prevalence ofFacebook (FB) addiction and its related factors among Thai high school students. This cross-sectional study was performed among 972 high school students in four provinces associated with high economic prosperity in Thailand: Bangkok, Ubon Ratchathani, Chiang Mai and Songkhla, utilizing a multistage cluster sampling technique. A self-administrative questionnaire was produced composing of three parts; demographic data, a Thai version of the Bergen Facebook Addiction Scale (Thai-BFAS) and the Thai version of the General Health Questionnaire-28 items. Multivariate analysis was employed to analyze thefactors associated with FB addiction. The prevalence ofFB addiction amongst Thai adolescents was 41.8% (95% CI; 38.6, 45.2). Related factors included gender school location, sufficiency ofpersonalfinance, devices ofFB access, duration ofstaying online via FB, andFB usage during holidays. In addition, every 1-hour increase in usage enhanced the risk for FB addiction (OR = 1.12, 95% CI; 1.05, 1.19). The prevalence of FB addiction in Thai high school students was found to be higher than in many other countries. Relatedfactors should be controlled in order to reduce FB addiction and its detrimental impacts, such as behavior modification and the promotion of healthier free-time activities. Further studies are recommended to understand why FB addiction is so high in Thailand.

Ownership and utilisation of long lasting insecticide treated nets following free distribution campaign in South West Nigeria.

PubMed

Aderibigbe, Sunday Adedeji; Olatona, Foluke Adenike; Sogunro, Oluremi; Alawode, Gafar; Babatunde, Oluwole Adeyemi; Onipe, Ambrose Itopa; Bolarinwa, Oladimeji Akeem; Ameen, Hafsat Abolore; Osagbemi, Gordon Kayode; Sanya, Emmanuel Olatunde; Olarinoye, Adebunmi Oyeladun; Akande, Tanimola Makanjuola

2014-01-01

Malaria has proven to be the most horrendous and intractable amongst the health problems confronting countries in the sub-Saharan Africa. This study aims to determine the ownership and utilisation of long lasting insecticide treated nets following free distribution campaign in a state in South West Nigeria. Multi-stage sampling technique was used to recruit 2560 households spread across the 16 LGAs of the state. Interviewer administered standardized questionnaire was used for the survey. Data analysis was done using Stata 10 software. Sixty eight point six percent (68.6%) of the households had at least one under-five child living in the household while 32.6% had at least one pregnant woman living in the household. A total of 2440 (95.3%) households received LLIN during the campaign. Overall, the utilization rate for all respondents was 58.5%. Despite the fact that 2440 households received LLINs during the campaign, only 84.3% of them were seen to have hung theirs during the survey. Coverage and ownership of LLINs increased significantly following the free distribution campaign. There was a discrepancy between net possession and net use with rate of use lower than possession. Post distribution educational campaign should be incorporated into future distribution campaigns to help increase net utilisation.

A completely automated flow, heat-capacity, calorimeter for use at high temperatures and pressures

NASA Astrophysics Data System (ADS)

Rogers, P. S. Z.; Sandarusi, Jamal

1990-11-01

An automated, flow calorimeter has been constructed to measure the isobaric heat capacities of concentrated, aqueous electrolyte solutions using a differential calorimetry technique. The calorimeter is capable of operation to 700 K and 40 MPa with a measurement accuracy of 0.03% relative to the heat capacity of the pure reference fluid (water). A novel design encloses the calorimeter within a double set of separately controlled, copper, adiabatic shields that minimize calorimeter heat losses and precisely control the temperature of the inlet fluids. A multistage preheat train, used to efficiently heat the flowing fluid, includes a counter-current heat exchanger for the inlet and outlet fluid streams in tandem with two calorimeter preheaters. Complete system automation is accomplished with a distributed control scheme using multiple processors, allowing the major control tasks of calorimeter operation and control, data logging and display, and pump control to be performed simultaneously. A sophisticated pumping strategy for the two separate syringe pumps allows continuous fluid delivery. This automation system enables the calorimeter to operate unattended except for the reloading of sample fluids. In addition, automation has allowed the development and implementation of an improved heat loss calibration method that provides calorimeter calibration with absolute accuracy comparable to the overall measurement precision, even for very concentrated solutions.

Ram-air sample collection device for a chemical warfare agent sensor

DOEpatents

Megerle, Clifford A.; Adkins, Douglas R.; Frye-Mason, Gregory C.

2002-01-01

In a surface acoustic wave sensor mounted within a body, the sensor having a surface acoustic wave array detector and a micro-fabricated sample preconcentrator exposed on a surface of the body, an apparatus for collecting air for the sensor, comprising a housing operatively arranged to mount atop the body, the housing including a multi-stage channel having an inlet and an outlet, the channel having a first stage having a first height and width proximate the inlet, a second stage having a second lower height and width proximate the micro-fabricated sample preconcentrator, a third stage having a still lower third height and width proximate the surface acoustic wave array detector, and a fourth stage having a fourth height and width proximate the outlet, where the fourth height and width are substantially the same as the first height and width.

Remote sensing-aided systems for snow qualification, evapotranspiration estimation, and their application in hydrologic models

NASA Technical Reports Server (NTRS)

Korram, S.

1977-01-01

The design of general remote sensing-aided methodologies was studied to provide the estimates of several important inputs to water yield forecast models. These input parameters are snow area extent, snow water content, and evapotranspiration. The study area is Feather River Watershed (780,000 hectares), Northern California. The general approach involved a stepwise sequence of identification of the required information, sample design, measurement/estimation, and evaluation of results. All the relevent and available information types needed in the estimation process are being defined. These include Landsat, meteorological satellite, and aircraft imagery, topographic and geologic data, ground truth data, and climatic data from ground stations. A cost-effective multistage sampling approach was employed in quantification of all the required parameters. The physical and statistical models for both snow quantification and evapotranspiration estimation was developed. These models use the information obtained by aerial and ground data through appropriate statistical sampling design.

Stackable differential mobility analyzer for aerosol measurement

DOEpatents

Cheng, Meng-Dawn [Oak Ridge, TN; Chen, Da-Ren [Creve Coeur, MO

2007-05-08

A multi-stage differential mobility analyzer (MDMA) for aerosol measurements includes a first electrode or grid including at least one inlet or injection slit for receiving an aerosol including charged particles for analysis. A second electrode or grid is spaced apart from the first electrode. The second electrode has at least one sampling outlet disposed at a plurality different distances along its length. A volume between the first and the second electrode or grid between the inlet or injection slit and a distal one of the plurality of sampling outlets forms a classifying region, the first and second electrodes for charging to suitable potentials to create an electric field within the classifying region. At least one inlet or injection slit in the second electrode receives a sheath gas flow into an upstream end of the classifying region, wherein each sampling outlet functions as an independent DMA stage and classifies different size ranges of charged particles based on electric mobility simultaneously.

The development of deep karst in the anticlinal aquifer structure based on the coupling of multistage flow systems

NASA Astrophysics Data System (ADS)

Xu, M.; Zhong, L.; Yang, Y.

2017-12-01

Under the background of neotectonics, the multistage underground flow system has been form due the different responses of main stream and tributaries to crust uplift. The coupling of multistage underground flow systems influences the development of karst thoroughly. At first, the research area is divided into vadose area, shunted area and exorheic area based on the development characteristics of transverse valley. Combining the controlling-drain action with topographic index and analyzing the coupling features of multistage underground flow system. And then, based on the coupling of multistage underground flow systems, the characteristics of deep karst development were verified by the lossing degree of surface water, water bursting and karst development characteristics of tunnels. The vadose area is regional water system based, whose deep karst developed well. It resulted the large water inflow of tunnels and the surface water drying up. The shunted area, except the region near the transverse valleys, is characterized by regional water system. The developed deep karst make the surface water connect with deep ground water well, Which caused the relatively large water flow of tunnels and the serious leakage of surface water. The deep karst relatively developed poor in the regions near transverse valleys which is characterized by local water system. The exorheic area is local water system based, whose the deep karst developed poor, as well as the connection among surface water and deep ground water. It has result in the poor lossing of the surface water under the tunnel construction. This study broadens the application field of groundwater flow systems theory, providing a new perspective for the study of Karst development theory. Meanwhile it provides theoretical guidance for hazard assessment and environmental negative effect in deep-buried Karst tunnel construction.

Long-term Outcomes With Planned Multistage Reduced Dose Repeat Stereotactic Radiosurgery for Treatment of Inoperable High-Grade Arteriovenous Malformations: An Observational Retrospective Cohort Study.

PubMed

Marciscano, Ariel E; Huang, Judy; Tamargo, Rafael J; Hu, Chen; Khattab, Mohamed H; Aggarwal, Sameer; Lim, Michael; Redmond, Kristin J; Rigamonti, Daniele; Kleinberg, Lawrence R

2017-07-01

There is no consensus regarding the optimal management of inoperable high-grade arteriovenous malformations (AVMs). This long-term study of 42 patients with high-grade AVMs reports obliteration and adverse event (AE) rates using planned multistage repeat stereotactic radiosurgery (SRS). To evaluate the efficacy and safety of multistage SRS with treatment of the entire AVM nidus at each treatment session to achieve complete obliteration of high-grade AVMs. Patients with high-grade Spetzler-Martin (S-M) III-V AVMs treated with at least 2 multistage SRS treatments from 1989 to 2013. Clinical outcomes of obliteration rate, minor/major AEs, and treatment characteristics were collected. Forty-two patients met inclusion criteria (n = 26, S-M III; n = 13, S-M IV; n = 3, S-M V) with a median follow-up was 9.5 yr after first SRS. Median number of SRS treatment stages was 2, and median interval between stages was 3.5 yr. Twenty-two patients underwent pre-SRS embolization. Complete AVM obliteration rate was 38%, and the median time to obliteration was 9.7 yr. On multivariate analysis, higher S-M grade was significantly associated ( P = .04) failure to achieve obliteration. Twenty-seven post-SRS AEs were observed, and the post-SRS intracranial hemorrhage rate was 0.027 events per patient year. Treatment of high-grade AVMs with multistage SRS achieves AVM obliteration in a meaningful proportion of patients with acceptable AE rates. Lower obliteration rates were associated with higher S-M grade and pre-SRS embolization. This approach should be considered with caution, as partial obliteration does not protect from hemorrhage. Copyright © 2017 by the Congress of Neurological Surgeons

Multi-stage mixing in subduction zone: Application to Merapi volcano, Indonesia

NASA Astrophysics Data System (ADS)

Debaille, V.; Doucelance, R.; Weis, D.; Schiano, P.

2003-04-01

Basalts sampling subduction zone volcanism (IAB) often show binary mixing relationship in classical Sr-Nd, Pb-Pb, Sr-Pb isotopic diagrams, generally interpreted as reflecting the involvement of two components in their source. However, several authors have highlighted the presence of minimum three components in such a geodynamical context: mantle wedge, subducted and altered oceanic crust and subducted sediments. The overlying continental crust can also contribute by contamination and assimilation in magma chambers and/or during magma ascent. Here we present a multi-stage model to obtain a two end-member mixing from three components (mantle wedge, altered oceanic crust and sediments). The first stage of the model considers the metasomatism of the mantle wedge by fluids and/or melts released by subducted materials (altered oceanic crust and associated sediments), considering mobility and partition coefficient of trace elements in hydrated fluids and silicate melts. This results in the generation of two distinct end-members, reducing the number of components (mantle wedge, oceanic crust, sediments) from three to two. The second stage of the model concerns the binary mixing of the two end-members thus defined: mantle wedge metasomatized by slab-derived fluids and mantle wedge metasomatized by sediment-derived fluids. This model has been applied on a new isotopic data set (Sr, Nd and Pb, analyzed by TIMS and MC-ICP-MS) of Merapi volcano (Java island, Indonesia). Previous studies have suggested three distinct components in the source of indonesian lavas: mantle wedge, subducted sediments and altered oceanic crust. Moreover, it has been shown that crustal contamination does not significantly affect isotopic ratios of lavas. The multi-stage model proposed here is able to reproduce the binary mixing observed in lavas of Merapi, and a set of numerical values of bulk partition coefficient is given that accounts for the genesis of lavas.

Performance Improvement of a Return Channel in a Multistage Centrifugal Compressor Using Multiobjective Optimization.

PubMed

Nishida, Yoshifumi; Kobayashi, Hiromi; Nishida, Hideo; Sugimura, Kazuyuki

2013-05-01

The effect of the design parameters of a return channel on the performance of a multistage centrifugal compressor was numerically investigated, and the shape of the return channel was optimized using a multiobjective optimization method based on a genetic algorithm to improve the performance of the centrifugal compressor. The results of sensitivity analysis using Latin hypercube sampling suggested that the inlet-to-outlet area ratio of the return vane affected the total pressure loss in the return channel, and that the inlet-to-outlet radius ratio of the return vane affected the outlet flow angle from the return vane. Moreover, this analysis suggested that the number of return vanes affected both the loss and the flow angle at the outlet. As a result of optimization, the number of return vane was increased from 14 to 22 and the area ratio was decreased from 0.71 to 0.66. The radius ratio was also decreased from 2.1 to 2.0. Performance tests on a centrifugal compressor with two return channels (the original design and optimized design) were carried out using two-stage test apparatus. The measured flow distribution exhibited a swirl flow in the center region and a reversed swirl flow near the hub and shroud sides. The exit flow of the optimized design was more uniform than that of the original design. For the optimized design, the overall two-stage efficiency and pressure coefficient were increased by 0.7% and 1.5%, respectively. Moreover, the second-stage efficiency and pressure coefficient were respectively increased by 1.0% and 3.2%. It is considered that the increase in the second-stage efficiency was caused by the increased uniformity of the flow, and the rise in the pressure coefficient was caused by a decrease in the residual swirl flow. It was thus concluded from the numerical and experimental results that the optimized return channel improved the performance of the multistage centrifugal compressor.

Bayesian aggregation versus majority vote in the characterization of non-specific arm pain based on quantitative needle electromyography

PubMed Central

2010-01-01

Background Methods for the calculation and application of quantitative electromyographic (EMG) statistics for the characterization of EMG data detected from forearm muscles of individuals with and without pain associated with repetitive strain injury are presented. Methods A classification procedure using a multi-stage application of Bayesian inference is presented that characterizes a set of motor unit potentials acquired using needle electromyography. The utility of this technique in characterizing EMG data obtained from both normal individuals and those presenting with symptoms of "non-specific arm pain" is explored and validated. The efficacy of the Bayesian technique is compared with simple voting methods. Results The aggregate Bayesian classifier presented is found to perform with accuracy equivalent to that of majority voting on the test data, with an overall accuracy greater than 0.85. Theoretical foundations of the technique are discussed, and are related to the observations found. Conclusions Aggregation of motor unit potential conditional probability distributions estimated using quantitative electromyographic analysis, may be successfully used to perform electrodiagnostic characterization of "non-specific arm pain." It is expected that these techniques will also be able to be applied to other types of electrodiagnostic data. PMID:20156353

Multimodal 3D cancer-mimicking optical phantom

PubMed Central

Smith, Gennifer T.; Lurie, Kristen L.; Zlatev, Dimitar V.; Liao, Joseph C.; Ellerbee Bowden, Audrey K.

2016-01-01

Three-dimensional (3D) organ-mimicking phantoms provide realistic imaging environments for testing various aspects of optical systems, including for evaluating new probe designs, characterizing the diagnostic potential of new technologies, and assessing novel image processing algorithms prior to validation in real tissue. We introduce and characterize the use of a new material, Dragon Skin (Smooth-On Inc.), and fabrication technique, air-brushing, for fabrication of a 3D phantom that mimics the appearance of a real organ under multiple imaging modalities. We demonstrate the utility of the material and technique by fabricating the first 3D, hollow bladder phantom with realistic normal and multi-stage pathology features suitable for endoscopic detection using the gold standard imaging technique, white light cystoscopy (WLC), as well as the complementary imaging modalities of optical coherence tomography and blue light cystoscopy, which are aimed at improving the sensitivity and specificity of WLC to bladder cancer detection. The flexibility of the material and technique used for phantom construction allowed for the representation of a wide range of diseased tissue states, ranging from inflammation (benign) to high-grade cancerous lesions. Such phantoms can serve as important tools for trainee education and evaluation of new endoscopic instrumentation. PMID:26977369

Multi-stage classification method oriented to aerial image based on low-rank recovery and multi-feature fusion sparse representation.

PubMed

Ma, Xu; Cheng, Yongmei; Hao, Shuai

2016-12-10

Automatic classification of terrain surfaces from an aerial image is essential for an autonomous unmanned aerial vehicle (UAV) landing at an unprepared site by using vision. Diverse terrain surfaces may show similar spectral properties due to the illumination and noise that easily cause poor classification performance. To address this issue, a multi-stage classification algorithm based on low-rank recovery and multi-feature fusion sparse representation is proposed. First, color moments and Gabor texture feature are extracted from training data and stacked as column vectors of a dictionary. Then we perform low-rank matrix recovery for the dictionary by using augmented Lagrange multipliers and construct a multi-stage terrain classifier. Experimental results on an aerial map database that we prepared verify the classification accuracy and robustness of the proposed method.

Prayer Attendance and General Health in the Iranian Adult Urban Population.

PubMed

Sotodehasl, Nemat; Ghorbani, Raheb; Mahdavi-Nejad, Gholamhosein; Haji-Aghajani, Saeed; Mehdizadeh, Jamileh

2016-02-01

This study was conducted to determine the relationship between prayer attendance and general health among adult urban population in Iran. A total of 470 males older than 17 years, chosen by multistage sampling, were investigated. The results showed that people who did not perform prayers compared to those who said prayers on time and performed Nafilahs (supererogatory prayers) were 2.87 (OR 2.87, 95 % CI 1.23-6.70, p = 0.015) times at risk of general health problems. In conclusion, the findings show that increasing the degree of people's belief in prayer can lead to improve general health.

Enzyme-regulated the changes of pH values for assembling a colorimetric and multistage interconnection logic network with multiple readouts.

PubMed

Huang, Yanyan; Ran, Xiang; Lin, Youhui; Ren, Jinsong; Qu, Xiaogang

2015-04-22

Based on enzymatic reactions-triggered changes of pH values and biocomputing, a novel and multistage interconnection biological network with multiple easy-detectable signal outputs has been developed. Compared with traditional chemical computing, the enzyme-based biological system could overcome the interference between reactions or the incompatibility of individual computing gates and offer a unique opportunity to assemble multicomponent/multifunctional logic circuitries. Our system included four enzyme inputs: β-galactosidase (β-gal), glucose oxidase (GOx), esterase (Est) and urease (Ur). With the assistance of two signal transducers (gold nanoparticles and acid-base indicators) or pH meter, the outputs of the biological network could be conveniently read by the naked eyes. In contrast to current methods, the approach present here could realize cost-effective, label-free and colorimetric logic operations without complicated instrument. By designing a series of Boolean logic operations, we could logically make judgment of the compositions of the samples on the basis of visual output signals. Our work offered a promising paradigm for future biological computing technology and might be highly useful in future intelligent diagnostics, prodrug activation, smart drug delivery, process control, and electronic applications. Copyright © 2015 Elsevier B.V. All rights reserved.

Handwritten numeral databases of Indian scripts and multistage recognition of mixed numerals.

PubMed

Bhattacharya, Ujjwal; Chaudhuri, B B

2009-03-01

This article primarily concerns the problem of isolated handwritten numeral recognition of major Indian scripts. The principal contributions presented here are (a) pioneering development of two databases for handwritten numerals of two most popular Indian scripts, (b) a multistage cascaded recognition scheme using wavelet based multiresolution representations and multilayer perceptron classifiers and (c) application of (b) for the recognition of mixed handwritten numerals of three Indian scripts Devanagari, Bangla and English. The present databases include respectively 22,556 and 23,392 handwritten isolated numeral samples of Devanagari and Bangla collected from real-life situations and these can be made available free of cost to researchers of other academic Institutions. In the proposed scheme, a numeral is subjected to three multilayer perceptron classifiers corresponding to three coarse-to-fine resolution levels in a cascaded manner. If rejection occurred even at the highest resolution, another multilayer perceptron is used as the final attempt to recognize the input numeral by combining the outputs of three classifiers of the previous stages. This scheme has been extended to the situation when the script of a document is not known a priori or the numerals written on a document belong to different scripts. Handwritten numerals in mixed scripts are frequently found in Indian postal mails and table-form documents.

Aerodynamic Design of Axial-flow Compressors. Volume III

NASA Technical Reports Server (NTRS)

Johnson, Irving A; Bullock, Robert O; Graham, Robert W; Costilow, Eleanor L; Huppert, Merle C; Benser, William A; Herzig, Howard Z; Hansen, Arthur G; Jackson, Robert J; Yohner, Peggy L;

A history of development in rotordynamics: A manufacturer's perspective

NASA Technical Reports Server (NTRS)

Shemeld, David E.

1987-01-01

The subject of rotordynamics and instability problems in high performance turbomachinery has been a topic of considerable industry discussion and debate over the last 15 or so years. This paper reviews an original equipment manufacturer's history of development of concepts and equipment as applicable to multistage centrifugal compressors. The variety of industry user compression requirements and resultant problematical situations tends to confound many of the theories and analytical techniques set forth. The experiences and examples described herein support the conclusion that the successful addressing of potential rotordynamics problems is best served by a fundamental knowledge of the specific equipment. This in addition to having the appropriate analytical tools. Also, that the final proof is in the doing.

Accurate solutions for transonic viscous flow over finite wings

NASA Technical Reports Server (NTRS)

Vatsa, V. N.

1986-01-01

An explicit multistage Runge-Kutta type time-stepping scheme is used for solving the three-dimensional, compressible, thin-layer Navier-Stokes equations. A finite-volume formulation is employed to facilitate treatment of complex grid topologies encountered in three-dimensional calculations. Convergence to steady state is expedited through usage of acceleration techniques. Further numerical efficiency is achieved through vectorization of the computer code. The accuracy of the overall scheme is evaluated by comparing the computed solutions with the experimental data for a finite wing under different test conditions in the transonic regime. A grid refinement study ir conducted to estimate the grid requirements for adequate resolution of salient features of such flows.

[Tobacco, alcohol, and drug use by teenagers in Pelotas, Rio Grande do Sul State, Brazil: a gender approach].

PubMed

Horta, Rogério Lessa; Horta, Bernardo Lessa; Pinheiro, Ricardo Tavares; Morales, Blanca; Strey, Marlene Neves

2007-04-01

This study assesses the relationship between gender and use of psychoactive substances (alcohol, nicotine, and illicit drugs) by teenagers. In 2002, a cross-sectional study was carried out in the urban area of Pelotas, southern Brazil. Multi-stage sampling was used to obtain a sample of adolescents, 15 to 18 years of age. Subjects were interviewed using a self-applied confidential questionnaire. Smoking was more prevalent among girls, while alcohol consumption in the previous month was more common among boys. Meanwhile, the proportion of adolescents that reported drug use in the previous month was unrelated to gender. Higher cigarette consumption by girls suggests an increase in smoking by women in the future, which highlights the need for a special focus on this area.

An adaptive technique for a redundant-sensor navigation system.

NASA Technical Reports Server (NTRS)

Chien, T.-T.

1972-01-01

An on-line adaptive technique is developed to provide a self-contained redundant-sensor navigation system with a capability to utilize its full potentiality in reliability and performance. This adaptive system is structured as a multistage stochastic process of detection, identification, and compensation. It is shown that the detection system can be effectively constructed on the basis of a design value, specified by mission requirements, of the unknown parameter in the actual system, and of a degradation mode in the form of a constant bias jump. A suboptimal detection system on the basis of Wald's sequential analysis is developed using the concept of information value and information feedback. The developed system is easily implemented, and demonstrates a performance remarkably close to that of the optimal nonlinear detection system. An invariant transformation is derived to eliminate the effect of nuisance parameters such that the ambiguous identification system can be reduced to a set of disjoint simple hypotheses tests. By application of a technique of decoupled bias estimation in the compensation system the adaptive system can be operated without any complicated reorganization.

Comparative Study of the Major White Matter Tracts Anatomy in Equine, Feline and Canine Brains by Use of the Fibre Dissection Technique.

PubMed

Pascalau, R; Aldea, C C; Padurean, V A; Szabo, B

2016-10-01

The spatial anatomy of the white matter tracts is a subject of growing interest not only for researchers but also for clinicians. Imagistic methods have some limitations so that they should be confronted with dissection studies. The aim of this paper was to provide a three-dimensional view of the major white matter tracts in equine, feline and canine brains by use of the fibre dissection technique. Twenty cerebral hemispheres (six equine, four feline and 10 canine brains) were prepared according to the Klingler method. Stepwise mediolateral and lateromedial blunt dissections were performed using wooden sticks and spatulas. The lateromedial dissection was followed by the opening of the lateral ventricle. The use of the same multi-stage procedures resulted in a comparable exposure of the major association, projection and commissural fibres and their spatial relation with the lateral ventricle. To conclude, the proposed techniques are reproducible in equine, feline and canine brains and they can be successfully used for teaching, training or research in the field of neurobiology. © 2015 Blackwell Verlag GmbH.

Distillation Designs for the Lunar Surface

NASA Technical Reports Server (NTRS)

Boul, Peter J.; Lange,Kevin E.; Conger, Bruce; Anderson, Molly

2010-01-01

Gravity-based distillation methods may be applied to the purification of wastewater on the lunar base. These solutions to water processing are robust physical separation techniques, which may be more advantageous than many other techniques for their simplicity in design and operation. The two techniques can be used in conjunction with each other to obtain high purity water. The components and feed compositions for modeling waste water streams are presented in conjunction with the Aspen property system for traditional stage distillation. While the individual components for each of the waste streams will vary naturally within certain bounds, an analog model for waste water processing is suggested based on typical concentration ranges for these components. Target purity levels for recycled water are determined for each individual component based on NASA s required maximum contaminant levels for potable water Optimum parameters such as reflux ratio, feed stage location, and processing rates are determined with respect to the power consumption of the process. Multistage distillation is evaluated for components in wastewater to determine the minimum number of stages necessary for each of 65 components in humidity condensate and urine wastewater mixed streams.

Traumatic laryngotracheal stenosis--an alternative surgical technique.

PubMed

Syal, Rajan; Tyagi, Isha; Goyal, Amit

2006-02-01

Reconstruction of combined laryngotracheal stenosis requires complex techniques including resection and incorporation of grafts and stents that can be performed as single or multistaged procedure. A complicated case of traumatic laryngotracheal stenosis was managed by us, surgical technique is discussed. A 16-year-old male presented with Stage-3 laryngotracheal stenosis of grade-3 to 4 (>70% of the complete obstruction of tracheal lumen) of 5 cm segment of the larynx and trachea. Restoration of the critical functions of respiration and phonation was achieved in this patient by resection anastomosis of the trachea and with subglottic remodeling. Resection of 5 cm long segment of trachea and primary anastomosis in this case would have created tension at the site of anastomosis. So we did tracheal resection of 3 cm segment of trachea along with subglottic remodeling instead of removing the 5 cm segment of stenosed laryngotracheal region and doing thyrotracheal anastomosis. In complicated long segment, laryngotracheal stenosis, tracheal resection and subglottic remodeling with primary anastomosis can be an alternative approach. Fibrin glue can be used to support free bone/cartilage grafts in laryngotracheal reconstructions.

Variability of Mercury Content in Coal Matter From Coal Seams of The Upper Silesia Coal Basin

NASA Astrophysics Data System (ADS)

Wierzchowski, Krzysztof; Chećko, Jarosław; Pyka, Ireneusz

2017-12-01

The process of identifying and documenting the quality parameters of coal, as well as the conditions of coal deposition in the seam, is multi-stage and extremely expensive. The taking and analyzing of seam samples is the method of assessment of the quality and quantity parameters of coals in deep mines. Depending on the method of sampling, it offers quite precise assessment of the quality parameters of potential commercial coals. The main kind of seam samples under consideration are so-called "documentary seam samples", which exclude dirt bands and other seam contaminants. Mercury content in coal matter from the currently accessible and exploited coal seams of the Upper Silesian Coal Basin (USCB) was assessed. It was noted that the mercury content in coal seams decreases with the age of the seam and, to a lesser extent, seam deposition depth. Maps of the variation of mercury content in selected lithostratigraphic units (layers) of the Upper Silesian Coal Basin have been created.

Multi-stage depressed collector for small orbit gyrotrons

DOEpatents

Singh, Amarjit; Ives, R. Lawrence; Schumacher, Richard V.; Mizuhara, Yosuke M.

1998-01-01

A multi-stage depressed collector for receiving energy from a small orbit gyrating electron beam employs a plurality of electrodes at different potentials for sorting the individual electrons on the basis of their total energy level. Magnetic field generating coils, for producing magnetic fields and magnetic iron for magnetic field shaping produce adiabatic and controlled non-adiabatic transitions of the incident electron beam to further facilitate the sorting.

Multi-stage depressed collector for small orbit gyrotrons

DOEpatents

Singh, A.; Ives, R.L.; Schumacher, R.V.; Mizuhara, Y.M.

1998-07-14

A multi-stage depressed collector for receiving energy from a small orbit gyrating electron beam employs a plurality of electrodes at different potentials for sorting the individual electrons on the basis of their total energy level. Magnetic field generating coils, for producing magnetic fields and magnetic iron for magnetic field shaping produce adiabatic and controlled non-adiabatic transitions of the incident electron beam to further facilitate the sorting. 9 figs.

Accuracy of a Classical Test Theory-Based Procedure for Estimating the Reliability of a Multistage Test. Research Report. ETS RR-17-02

ERIC Educational Resources Information Center

Kim, Sooyeon; Livingston, Samuel A.

2017-01-01

The purpose of this simulation study was to assess the accuracy of a classical test theory (CTT)-based procedure for estimating the alternate-forms reliability of scores on a multistage test (MST) having 3 stages. We generated item difficulty and discrimination parameters for 10 parallel, nonoverlapping forms of the complete 3-stage test and…

The automated multi-stage substructuring system for NASTRAN

NASA Technical Reports Server (NTRS)

Field, E. I.; Herting, D. N.; Herendeen, D. L.; Hoesly, R. L.

1975-01-01

The substructuring capability developed for eventual installation in Level 16 is now operational in a test version of NASTRAN. Its features are summarized. These include the user-oriented, Case Control type control language, the automated multi-stage matrix processing, the independent direct access data storage facilities, and the static and normal modes solution capabilities. A complete problem analysis sequence is presented with card-by-card description of the user input.

Multi-stage, isothermal CO preferential oxidation reactor

DOEpatents

Skala, Glenn William; Brundage, Mark A.; Borup, Rodney Lynn; Pettit, William Henry; Stukey, Kevin; Hart-Predmore, David James; Fairchok, Joel

2000-01-01

A multi-stage, isothermal, carbon monoxide preferential oxidation (PrOx) reactor comprising a plurality of serially arranged, catalyzed heat exchangers, each separated from the next by a mixing chamber for homogenizing the gases exiting one heat exchanger and entering the next. In a preferred embodiment, at least some of the air used in the PrOx reaction is injected directly into the mixing chamber between the catalyzed heat exchangers.

Multistage Adaptive Testing for a Large-Scale Classification Test: Design, Heuristic Assembly, and Comparison with Other Testing Modes. ACT Research Report Series, 2012 (6)

ERIC Educational Resources Information Center

Zheng, Yi; Nozawa, Yuki; Gao, Xiaohong; Chang, Hua-Hua

2012-01-01

Multistage adaptive tests (MSTs) have gained increasing popularity in recent years. MST is a balanced compromise between linear test forms (i.e., paper-and-pencil testing and computer-based testing) and traditional item-level computer-adaptive testing (CAT). It combines the advantages of both. On one hand, MST is adaptive (and therefore more…

A multistage decision support framework to guide tree species management under climate change via habitat suitability and colonization models, and a knowledge-based scoring system

Treesearch

Anantha M. Prasad; Louis R. Iverson; Stephen N. Matthews; Matthew P. Peters

2016-01-01

Context. No single model can capture the complex species range dynamics under changing climates--hence the need for a combination approach that addresses management concerns. Objective. A multistage approach is illustrated to manage forested landscapes under climate change. We combine a tree species habitat model--DISTRIB II, a species colonization model--SHIFT, and...

Effect of proton-conduction in electrolyte on electric efficiency of multi-stage solid oxide fuel cells

PubMed Central

Matsuzaki, Yoshio; Tachikawa, Yuya; Somekawa, Takaaki; Hatae, Toru; Matsumoto, Hiroshige; Taniguchi, Shunsuke; Sasaki, Kazunari

2015-01-01

Solid oxide fuel cells (SOFCs) are promising electrochemical devices that enable the highest fuel-to-electricity conversion efficiencies under high operating temperatures. The concept of multi-stage electrochemical oxidation using SOFCs has been proposed and studied over the past several decades for further improving the electrical efficiency. However, the improvement is limited by fuel dilution downstream of the fuel flow. Therefore, evolved technologies are required to achieve considerably higher electrical efficiencies. Here we present an innovative concept for a critically-high fuel-to-electricity conversion efficiency of up to 85% based on the lower heating value (LHV), in which a high-temperature multi-stage electrochemical oxidation is combined with a proton-conducting solid electrolyte. Switching a solid electrolyte material from a conventional oxide-ion conducting material to a proton-conducting material under the high-temperature multi-stage electrochemical oxidation mechanism has proven to be highly advantageous for the electrical efficiency. The DC efficiency of 85% (LHV) corresponds to a net AC efficiency of approximately 76% (LHV), where the net AC efficiency refers to the transmission-end AC efficiency. This evolved concept will yield a considerably higher efficiency with a much smaller generation capacity than the state-of-the-art several tens-of-MW-class most advanced combined cycle (MACC). PMID:26218470

Effect of proton-conduction in electrolyte on electric efficiency of multi-stage solid oxide fuel cells.

PubMed

Matsuzaki, Yoshio; Tachikawa, Yuya; Somekawa, Takaaki; Hatae, Toru; Matsumoto, Hiroshige; Taniguchi, Shunsuke; Sasaki, Kazunari

2015-07-28

Solid oxide fuel cells (SOFCs) are promising electrochemical devices that enable the highest fuel-to-electricity conversion efficiencies under high operating temperatures. The concept of multi-stage electrochemical oxidation using SOFCs has been proposed and studied over the past several decades for further improving the electrical efficiency. However, the improvement is limited by fuel dilution downstream of the fuel flow. Therefore, evolved technologies are required to achieve considerably higher electrical efficiencies. Here we present an innovative concept for a critically-high fuel-to-electricity conversion efficiency of up to 85% based on the lower heating value (LHV), in which a high-temperature multi-stage electrochemical oxidation is combined with a proton-conducting solid electrolyte. Switching a solid electrolyte material from a conventional oxide-ion conducting material to a proton-conducting material under the high-temperature multi-stage electrochemical oxidation mechanism has proven to be highly advantageous for the electrical efficiency. The DC efficiency of 85% (LHV) corresponds to a net AC efficiency of approximately 76% (LHV), where the net AC efficiency refers to the transmission-end AC efficiency. This evolved concept will yield a considerably higher efficiency with a much smaller generation capacity than the state-of-the-art several tens-of-MW-class most advanced combined cycle (MACC).

Performance Evaluation of Reduced-Chord Rotor Blading as Applied to J73 Two-Stage Turbine

NASA Technical Reports Server (NTRS)

Schurn, Harold J.

1957-01-01

The multistage turbine from the J73 turbojet engine has previously been investigated with standard and with reduced-chord rotor blading in order to determine the individual performance characteristics of each configuration over a range of over-all pressure ratio and speed. Because both turbine configurations exhibited peak efficiencies of over 90 percent, and because both units had relatively wide efficient operating ranges, it was considered of interest to determine the performance of the first stage of the turbine as a separate component. Accordingly, the standard-bladed multistage turbine was modified by removing the second-stage rotor disk and stator and altering the flow passage so that the first stage of the unit could be operated independently. The modified single-stage turbine was then operated over a range of stage pressure ratio and speed. The single-stage turbine operated at a peak brake internal efficiency of over 90 percent at an over-all stage pressure ratio of 1.4 and at 90 percent of design equivalent speed. Furthermore, the unit operated at high efficiencies over a relatively wide operating range. When the single-stage results were compared with the multistage results at the design operating point, it was found that the first stage produced approximately half the total multistage-turbine work output.

A novel data reduction technique for single slanted hot-wire measurements used to study incompressible compressor tip leakage flows

NASA Astrophysics Data System (ADS)

Berdanier, Reid A.; Key, Nicole L.

2016-03-01

The single slanted hot-wire technique has been used extensively as a method for measuring three velocity components in turbomachinery applications. The cross-flow orientation of probes with respect to the mean flow in rotating machinery results in detrimental prong interference effects when using multi-wire probes. As a result, the single slanted hot-wire technique is often preferred. Typical data reduction techniques solve a set of nonlinear equations determined by curve fits to calibration data. A new method is proposed which utilizes a look-up table method applied to a simulated triple-wire sensor with application to turbomachinery environments having subsonic, incompressible flows. Specific discussion regarding corrections for temperature and density changes present in a multistage compressor application is included, and additional consideration is given to the experimental error which accompanies each data reduction process. Hot-wire data collected from a three-stage research compressor with two rotor tip clearances are used to compare the look-up table technique with the traditional nonlinear equation method. The look-up table approach yields velocity errors of less than 5 % for test conditions deviating by more than 20 °C from calibration conditions (on par with the nonlinear solver method), while requiring less than 10 % of the computational processing time.

Identification of a New Susceptibility Locus for Systemic Lupus Erythematosus on Chromosome 12 in Individuals of European Ancestry

PubMed Central

Demirci, F. Yesim; Wang, Xingbin; Kelly, Jennifer A.; Morris, David L.; Barmada, M. Michael; Feingold, Eleanor; Kao, Amy H.; Sivils, Kathy L.; Bernatsky, Sasha; Pineau, Christian; Clarke, Ann; Ramsey-Goldman, Rosalind; Vyse, Timothy J.; Gaffney, Patrick M.; Manzi, Susan; Kamboh, M. Ilyas

2016-01-01

Objective Genome-wide association studies (GWASs) in individuals of European ancestry identified a number of systemic lupus erythematosus (SLE) susceptibility loci using earlier versions of high-density genotyping platforms. Follow-up studies on suggestive GWAS regions using larger samples and more markers identified additional SLE loci in European-descent subjects. Here we report the results of a multi-stage study that we performed to identify novel SLE loci. Methods In Stage 1, we conducted a new GWAS of SLE in a North American case-control sample of European ancestry (n=1,166) genotyped on Affymetrix Genome-Wide Human SNP Array 6.0. In Stage 2, we further investigated top new suggestive GWAS hits by in silico evaluation and meta-analysis using an additional dataset of European-descent subjects (>2,500 individuals), followed by replication of top meta-analysis findings in another dataset of European-descent subjects (>10,000 individuals) in Stage 3. Results As expected, our GWAS revealed most significant associations at the major histocompatibility complex locus (6p21), which easily surpassed genome-wide significance threshold (P<5×10−8). Several other SLE signals/loci previously implicated in Caucasians and/or Asians were also supported in Stage 1 discovery sample and strongest signals were observed at 2q32/STAT4 (P=3.6×10−7) and at 8p23/BLK (P=8.1×10−6). Stage 2 meta-analyses identified a new genome-wide significant SLE locus at 12q12 (meta P=3.1×10−8), which was replicated in Stage 3. Conclusion Our multi-stage study identified and replicated a new SLE locus that warrants further follow-up in additional studies. Publicly available databases suggest that this new SLE signal falls within a functionally relevant genomic region and near biologically important genes. PMID:26316170

Association between alcohol consumption and periodontal disease among older Nigerians in plateau state: a preliminary study.

PubMed

Akpata, E Samuel; Adeniyi, Abiola A; Enwonwu, Cyril O; Adeleke, Oyeladun A; Otoh, Emmanuel C

2016-09-01

To report the periodontal status of older adults in Plateau State, Nigeria, and determine its Association with alcohol consumption. Periodontal disease is common among Nigerians, and the prevalence increases with age. The role that alcohol consumption plays in the occurrence of the disease among Africans is uncertain. Sample selection was performed using a multistage cluster sampling technique among older adults in Plateau State, Nigeria. Interviews, using structured questionnaires, were conducted for each of the participants. Clinical examinations were then carried out to determine the occurrence of periodontal disease, assessed by clinical attachment loss and probing depth. The prevalence of periodontal disease was 79%, being severe in 46% of the population. Almost half of the participants (46.7%) examined were still actively consuming alcohol, among which 48% reported a history of intoxication. There was no statistically significant relationship between periodontal disease and the frequency of alcohol consumption, or quantity consumed on each occasion. However, alcohol consumption was highly correlated with periodontal disease among those who reported intoxication from the drink (r = 0.095; p = 0.033). A history of intoxication with alcohol was the only significant predictor of periodontal disease, after adjusting for age and gender. Periodontal disease was highly prevalent among older Nigerians in this study. Apart from those who reported intoxication from alcohol, there was no statistically significant relationship between the prevalence of periodontal disease and the frequency of alcohol consumption or the quantity consumed on each occasion. © 2014 John Wiley & Sons A/S and The Gerodontology Association. Published by John Wiley & Sons Ltd.

The age and symptomatology of natural menopause among United Arab Emirates women.

PubMed

Rizk, D E; Bener, A; Ezimokhai, M; Hassan, M Y; Micallef, R

1998-06-17

To determine the median age of natural menopause in United Arab Emirates women, the factors affecting that age and the prevalence of climacteric symptoms amongst those women. A population-based survey was conducted on a community sample of United Arab Emirates women who had had natural menopause defined as cessation of menstruation for at least 6 months at the end of reproductive years. A total of 742 women aged 40 years and above were recruited from both urban and rural areas of the country using the multi-stage stratified cluster sampling technique. Data were collected using a structured questionnaire and face to face interviews and included a number of familial, reproductive and life-style variables. The median age of the menopause in the United Arab Emirates is 48 years (mean = 47.3 +/- 3.29, range 40-59). This is significantly lower than the median age reported from the West (50.3 years). The subject median age of the menopause was significantly related to that of the mother (P < 0.001), older sister (P < 0.001), parity (P < 0.0001) and the previous use of oral contraceptive pills for more than 1 year (P < 0.001). Hot flushes were the commonest feature of the menopause occurring in 45% of women. The age of natural menopause in United Arab Emirates women, as in other developing countries, is less than in Western women and may be influenced by genetic factors, parity and previous use of oral contraceptives. Climacteric symptomatology, however, is similar in the different patient groups.

Bangladesh Midlife Women's Health Study (BMWHS): methods, challenges and experiences.

PubMed

Islam, Rakibul M; Bell, Robin J; Hossain, Mohammad B; Davis, Susan R

2015-01-01

To understand the challenges and experiences encountered during data collection for Bangladesh Midlife Women's Health Study (BMWHS) that investigated the low uptake of cervical cancer (CCa) screening barriers, understanding of breast cancer (BCa) knowledge and practices, the prevalence of urinary and fecal incontinence and menopausal symptoms. A multistage cluster sampling technique was used to recruit women from the 32 districts of Bangladesh that had offered CCa screening. Female interviewers were trained to undertake structured face-to-face interviews that incorporated both non-validated and several validated questionnaires, such as Question for Urinary Incontinence Diagnosis, Pelvic Organ Prolapse Distress Inventory, Colorectal-Anal Distress Inventory and Menopause-Specific Quality of Life. We completed surveys of 1590 women, estimated age 30-59 years, between September 2013 and March 2014. We implemented several strategies to deal with low literacy and used the temporal relationship between marriage and childbirth, and the average age of onset of menarche, to estimate age. Cultural and religious sensitivities and personal security were managed by engaging community leaders, limiting activities to daylight hours, adopting local codes of dress, such as the wearing of head scarves. Our major challenges and experiences included difficulties in age determination, selection of and access to households, interview privacy, lack of basic and health literacy, transportation, political unrest and security of the interviewers. By anticipating challenges, we have been able to comprehensively survey a representative sample of Bangladeshi women. Disseminating information about the field challenges and experiences from the BMWHS should assist other researchers planning to conduct surveys about women's health issues in similar context. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Arab Teens Lifestyle Study (ATLS): objectives, design, methodology and implications.

PubMed

Al-Hazzaa, Hazzaa M; Musaiger, Abdulrahman O

2011-01-01

There is a lack of comparable data on physical activity, sedentary behavior, and dietary habits among Arab adolescents, which limits our understanding and interpretation of the relationship between obesity and lifestyle parameters. Therefore, we initiated the Arab Teens Lifestyle Study (ATLS). The ATLS is a multicenter collaborative project for assessing lifestyle habits of Arab adolescents. The objectives of the ATLS project were to investigate the prevalence rates for overweight and obesity, physical activity, sedentary activity and dietary habits among Arab adolescents, and to examine the interrelationships between these lifestyle variables. This paper reports on the objectives, design, methodology, and implications of the ATLS. The ATLS is a school-based cross-sectional study involving 9182 randomly selected secondary-school students (14-19 years) from major Arab cities, using a multistage stratified sampling technique. The participating Arab cities included Riyadh, Jeddah, and Al-Khobar (Saudi Arabia), Bahrain, Dubai (United Arab Emirates), Kuwait, Amman (Jordan), Mosel (Iraq), Muscat (Oman), Tunisia (Tunisia) and Kenitra (Morocco). Measured variables included anthropometric measurements, physical activity, sedentary behavior, sleep duration, and dietary habits. The ATLS project will provide a unique opportunity to collect and analyze important lifestyle information from Arab adolescents using standardized procedures. This is the first time a collaborative Arab project will simultaneously assess broad lifestyle variables in a large sample of adolescents from numerous urbanized Arab regions. This joint research project will supply us with comprehensive and recent data on physical activity/inactivity and eating habits of Arab adolescents relative to obesity. Such invaluable lifestyle-related data are crucial for developing public health policies and regional strategies for health promotion and disease prevention.

Prevalence, awareness, treatment and control of hypertension among the elderly in Bangladesh and India: a multicentre study.

PubMed Central

2001-01-01

OBJECTIVE: To evaluate the prevalence, awareness, treatment and control of hypertension among elderly individuals in Bangladesh and India. METHOD: A community-based sample of 1203 elderly individuals (670 women; mean age, 70 years) was selected using a multistage cluster sampling technique from two sites in Bangladesh and three sites in India. FINDINGS: The overall prevalence of hypertension (WHO-International Society for Hypertension criteria) was 65% (95% confidence interval = 62-67%). The prevalence was higher in urban than rural areas, but did not differ significantly between the sexes. Multiple logistic regression analyses identified a higher body mass index, higher education status and prevalent diabetes mellitus as important correlates of the prevalence of hypertension. Physical activity, rural residence, and current smoking were inversely related to the prevalence of hypertension. Among study subjects who had hypertension, 45% were aware of their condition, 40% were taking anti-hypertensive medications, but only 10% achieved the level established by the US Sixth Joint National Committee on Detection, Evaluation and Treatment of Hypertension (JNC VI)/WHO criteria. A visit to a physician in the previous year, higher educational attainment and being female emerged as important correlates of hypertension awareness. CONCLUSIONS: Our findings emphasize the need to implement effective and low cost management regimens based on absolute levels of cardiovascular risk appropriate for the economic context. From a public health perspective, the only sustainable approach to the high prevalence of hypertension in the Indian subcontinent is through a strategy to reduce the average blood pressure in the population. PMID:11436469

Predicting risk for childhood asthma by pre-pregnancy, perinatal, and postnatal factors.

PubMed

Wen, Hui-Ju; Chiang, Tung-Liang; Lin, Shio-Jean; Guo, Yue Leon

2015-05-01

Symptoms of atopic disease start early in human life. Predicting risk for childhood asthma by early-life exposure would contribute to disease prevention. A birth cohort study was conducted to investigate early-life risk factors for childhood asthma and to develop a predictive model for the development of asthma. National representative samples of newborn babies were obtained by multistage stratified systematic sampling from the 2005 Taiwan Birth Registry. Information on potential risk factors and children's health was collected by home interview when babies were 6 months old and 5 yr old, respectively. Backward stepwise regression analysis was used to identify the risk factors of childhood asthma for predictive models that were used to calculate the probability of childhood asthma. A total of 19,192 children completed the study satisfactorily. Physician-diagnosed asthma was reported in 6.6% of 5-yr-old children. Pre-pregnancy factors (parental atopy and socioeconomic status), perinatal factors (place of residence, exposure to indoor mold and painting/renovations during pregnancy), and postnatal factors (maternal postpartum depression and the presence of atopic dermatitis before 6 months of age) were chosen for the predictive models, and the highest predicted probability of asthma in 5-yr-old children was 68.1% in boys and 78.1% in girls; the lowest probability in boys and girls was 4.1% and 3.2%, respectively. This investigation provides a technique for predicting risk of childhood asthma that can be used to developing a preventive strategy against asthma. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Decomposing Gender Disparity in Total Physical Activity among Iranian Adults.

PubMed

Rahimi, Ebrahim; Hashemi-Nazari, Seyed Saeed; Etemad, Koorosh; Soori, Hamid

2017-01-01

While gender differences in physical activity (PA) have been reported, their origin is not well understood. The present study aimed to identify factors contributing to this disparity. This was a population-based cross-sectional study based on the 2011 surveillance of risk factors of non-communicable diseases that was conducted among Iranian adults. Multi-staged sampling was performed to obtain the required study sample. The primary outcome was gender differences in the prevalence of sufficient physical activity (SPA). Total physical activity (TPA) was calculated as metabolic equivalents (MET) per minute during a typical week, as recommended by the World Health Organization. On this basis, achieving 600 MET-min/wk or more was defined as SPA. The nonlinear Blinder-Oaxaca decomposition technique was used to explain the disparity. The predicted gap was 19.50%. About one-third of the gap was due to differences in the level of observable covariates. Among them, work status contributed the most (29.61%). A substantial portion of the gap remained unexplained by such differences, of which about 40.41% was related to unobservable variables. The differential effects of standard of living, ethnicity, and smoking status made the largest contribution, accounting for 37.36, 35.47, and 28.50%, respectively. Interventions to reduce the gender gap in PA should focus on increasing TPA among housewives and women with chronic diseases, as well as those with a higher standard of living. In addition, it is essential to explore the impact of ethnicity and smoking status on women's TPA in order to promote health.

Family structure, socioeconomic position and utilization of oral health services among Nigerian senior secondary school pupils.

PubMed

Ola, Dennis; Gambôa, Ana B O; Folayan, Morenike O; Marcenes, Wagner

2013-01-01

To test the relationship between socioeconomic position (SEP), family composition, number of siblings, and birth position in the family, and the utilization of oral health services by senior secondary school pupils in Ile-Ife, Nigeria. A cross-sectional study design included senior secondary school pupils in the Central Local Government Area of Ile-Ife during 2007/2008. Sample size calculation was performed and 1,200 pupils were invited to participate. A multistage, stratified sampling technique was used. Data collection included a self-administered questionnaire. Data were analyzed using logistic regression. The response rate was 76 percent (n=1043). The mean age was 15.8 (standard deviation=1.9) and 49 percent were males. Only 22.5 percent of pupils had ever visited a dentist in their lives. Results from multivariate analyses showed that pupils attending free schools, those paying 1 to 10,000 naira (equivalent to US$ 63.31) and 10,000 to 19,000 naira (equivalent to US$ 120.29) were respectively 1.93, 1.87, and 2.74 times less likely to have attended a dentist in the past than pupils in more expensive schools. Pupils living with single mothers or without a parent were unlikely to have visited the dentist. Number of siblings and birth position in the family were not associated with utilization of oral health services. Adolescents from families with a low SEP growing up without their parents may need extra incentives to visit dentist. © 2012 American Association of Public Health Dentistry.

Effect of adverse childhood experiences on physical health in adulthood: Results of a study conducted in Baghdad city.

PubMed

Al-Shawi, Ameel F; Lafta, Riyadh K

2015-01-01

Studies have revealed a powerful relationship between adverse childhood experiences (ACEs) and physical and mental health in adulthood. Literature documents the conversion of traumatic emotional experiences in childhood into organic disease later in life. The aim was to estimate the effect of childhood experiences on the physical health of adults in Baghdad city. A cross-sectional study was conducted from January 2013 to January 2014. The study sample was drawn from Baghdad city. Multistage sampling techniques were used in choosing 13 primary health care centers and eight colleges of three universities in Baghdad. In addition, teachers of seven primary schools and two secondary schools were chosen by a convenient method. Childhood experiences were measured by applying a modified standardized ACEs-International Questionnaire form and with questions for bonding to family and parental monitoring. Physical health assessment was measured by a modified questionnaire derived from Health Appraisal Questionnaire of Centers for Disease Control and Prevention. The questionnaire includes questions on cerebrovascular diseases, diabetes mellitus, tumor, respiratory and gastrointestinal diseases. Logistic regression model showed that a higher level of bonding to family (fourth quartile) is expected to reduce the risk of chronic physical diseases by almost the half (odds ratio = 0.57) and exposure to a high level of household dysfunction and abuse (fourth quartile) is expected to increase the risk of chronic physical diseases by 81%. Childhood experiences play a major role in the determination of health outcomes in adulthood, and early prevention of ACEs. Encouraging strong family bonding can promote physical health in later life.

Relative Contribution of Obesity, Sedentary Behaviors and Dietary Habits to Sleep Duration Among Kuwaiti Adolescents

PubMed Central

Al-Haifi, Ahmad A.; AlMajed, Hana Th.; Al-Hazzaa, Hazzaa M.; Musaiger, Abdulrahman O.; Arab, Mariam A.; Hasan, Rasha A.

2016-01-01

The aim of this study was to investigate whether body mass index (BMI), eating habits and sedentary behaviours were associated with sleep duration among Kuwaiti adolescents. The study is part of the Arab Teens Lifestyle Study (ATLS), which is a school-based cross-sectional multi-center collaborative study. A sample of 906 adolescents (boys and girls) aged 14-19 years was randomly selected from 6 Kuwaiti Governances using a multistage stratified cluster sampling technique. The findings revealed that the prevalence of overweight and obesity was 50.5% in boys and 46.5% in girls. The majority of boys (76%) and of girls (74%) fell into the short sleep duration category (6 hours/day or less). Sleep duration were found to be negatively associated with BMI (girls only). Watching television (boys and girls) and working on computers (boys only) were also negatively associated with sleep duration. While the consumption of breakfast (both genders) and milk (boys only) was positively associated with sleep duration (p<0.05). In contrast, the consumption of fast foods (both genders), sugar-sweetened drinks and sweets (boys only) potatoes (girls only) were negatively associated with sleep duration (p<0.05). It can be concluded that the majority of Kuwaiti adolescents exhibit insufficient sleep duration which was associated with obesity measure, a combination of poor eating habits and more sedentary behaviors. The findings also suggest gender differences in these associations. Therefore, adequate sleep is an important modifiable risk factor to prevent obesity and was positively associated with some unhealthy lifestyle habits. PMID:26234983

Contraception Use among Egyptian Women: Results from Egypt Demographic and Health Survey in 2005

PubMed Central

Awadalla, Hala Ibrahim

2012-01-01

Background The reports of a rise in contraceptive practices have not been matched by a similar decrease in population: therefore, there is a need to look into the causes of this discrepancy. The objectives of this study were to determine the prevalence of different methods of contraception used by Egyptian women, to compare different contraception methods used among various socio-demographic groups and, finally, to identify the main decision makers of contraception use within Egyptian families. Methods The 2005 Egypt Demographic and Health Survey (EDHS) is a nationally representative household survey of 18134 married women aged 15–49 years. The 2005 EDHS provides a wealth of information on fertility, family planning, maternal and child health and nutrition, and violence against women. The study sample was selected using a multistage sampling technique. A face-to-face structured interview was conducted with each of the selected women. The response rate was 99.5% for completing the questionnaires. Results The prevalence of contraception was 57.5%, nearly one third of the participants (33.1%) used IUD as a method of contraception. Both male and female were responsible for decision making regarding the use of contraception among different educational levels. Most women reporting use of contraceptive methods were 30–39 years old, were employed, were rich, educated and belonged to urban governorates. Conclusion More than half of the participants used contraception while IUDs and pills were the most commonly used methods. Whatever the level of education, the majority of women thought that family planning decisions should be made by both partners. PMID:23926542

Human immunodeficiency virus/acquired immunodeficiency syndrome knowledge among high school students in Kırıkkale province of Turkey

PubMed Central

Aylıkçı, Bahadır Uğur; Bamise, Cornelius Tokunbo; Hamidi, Mehmet Mustafa; Turkal, Mustafa; Çolak, Hakan

2013-01-01

Background: The purpose of the present study was to assess the existing level of knowledge of high school children about human immunodeficiency virus/acquired immunodeficiency syndrome (HIV/AIDS) and the sources of their information. Materials and Methods: A cross-sectional survey was conducted in two high schools in Kirikkale, Turkey and data were collected by a self-administered questionnaire. Multi-stage sampling technique was used to obtain a representative sample. Results: Four hundred and seventy three participants; 230 males and 243 females were analyzed. Their ages ranged from 15 to 19 years with a mean age of 16.81 ± 1.27. 92.2% of the students claimed to have heard about HIV/AIDS prior to the study with slightly more females than males. Although with some misconceptions, majority of the participants knew that HIV is not transmitted by sharing meals, casual contact, and sleeping in the same room and using the same bathroom. 93.4% identified HIV/AIDS as a life-threatening disease and 27% believe that there is a cure for AIDS. 64% and 22.8% respectively believed that the people can protect themselves by using condoms and by avoiding sexual contact. Internet was preponderantly claimed as the most important source of information about HIV/AIDS. Conclusion: Empirical evidence from this study suggests that the students have a fairly high knowledge of HIV/AIDS. This is not without some misconceptions about the prognosis of the disease. Internet was the major source of HIV/AIDS information. PMID:23633840

Decomposing Gender Disparity in Total Physical Activity among Iranian Adults

PubMed Central

2017-01-01

OBJECTIVES While gender differences in physical activity (PA) have been reported, their origin is not well understood. The present study aimed to identify factors contributing to this disparity. METHODS This was a population-based cross-sectional study based on the 2011 surveillance of risk factors of non-communicable diseases that was conducted among Iranian adults. Multi-staged sampling was performed to obtain the required study sample. The primary outcome was gender differences in the prevalence of sufficient physical activity (SPA). Total physical activity (TPA) was calculated as metabolic equivalents (MET) per minute during a typical week, as recommended by the World Health Organization. On this basis, achieving 600 MET-min/wk or more was defined as SPA. The nonlinear Blinder-Oaxaca decomposition technique was used to explain the disparity. RESULTS The predicted gap was 19.50%. About one-third of the gap was due to differences in the level of observable covariates. Among them, work status contributed the most (29.61%). A substantial portion of the gap remained unexplained by such differences, of which about 40.41% was related to unobservable variables. The differential effects of standard of living, ethnicity, and smoking status made the largest contribution, accounting for 37.36, 35.47, and 28.50%, respectively. CONCLUSIONS Interventions to reduce the gender gap in PA should focus on increasing TPA among housewives and women with chronic diseases, as well as those with a higher standard of living. In addition, it is essential to explore the impact of ethnicity and smoking status on women’s TPA in order to promote health. PMID:29056032

Effectiveness of Item Response Theory (IRT) Proficiency Estimation Methods under Adaptive Multistage Testing. Research Report. ETS RR-15-11

ERIC Educational Resources Information Center

Kim, Sooyeon; Moses, Tim; Yoo, Hanwook Henry

2015-01-01

The purpose of this inquiry was to investigate the effectiveness of item response theory (IRT) proficiency estimators in terms of estimation bias and error under multistage testing (MST). We chose a 2-stage MST design in which 1 adaptation to the examinees' ability levels takes place. It includes 4 modules (1 at Stage 1, 3 at Stage 2) and 3 paths…

Patient-centred screening for primary immunodeficiency, a multi-stage diagnostic protocol designed for non-immunologists: 2011 update

PubMed Central

de Vries, E

2012-01-01

Members of the European Society for Immunodeficiencies (ESID) and other colleagues have updated the multi-stage expert-opinion-based diagnostic protocol for non-immunologists incorporating newly defined primary immunodeficiency diseases (PIDs). The protocol presented here aims to increase the awareness of PIDs among doctors working in different fields. Prompt identification of PID is important for prognosis, but this may not be an easy task. The protocol therefore starts from the clinical presentation of the patient. Because PIDs may present at all ages, this protocol is aimed at both adult and paediatric physicians. The multi-stage design allows cost-effective screening for PID of the large number of potential cases in the early phases, with more expensive tests reserved for definitive classification in collaboration with a specialist in the field of immunodeficiency at a later stage. PMID:22132890

Reentry trajectory optimization based on a multistage pseudospectral method.

PubMed

Zhao, Jiang; Zhou, Rui; Jin, Xuelian

2014-01-01

Of the many direct numerical methods, the pseudospectral method serves as an effective tool to solve the reentry trajectory optimization for hypersonic vehicles. However, the traditional pseudospectral method is time-consuming due to large number of discretization points. For the purpose of autonomous and adaptive reentry guidance, the research herein presents a multistage trajectory control strategy based on the pseudospectral method, capable of dealing with the unexpected situations in reentry flight. The strategy typically includes two subproblems: the trajectory estimation and trajectory refining. In each processing stage, the proposed method generates a specified range of trajectory with the transition of the flight state. The full glide trajectory consists of several optimal trajectory sequences. The newly focused geographic constraints in actual flight are discussed thereafter. Numerical examples of free-space flight, target transition flight, and threat avoidance flight are used to show the feasible application of multistage pseudospectral method in reentry trajectory optimization.

Reentry Trajectory Optimization Based on a Multistage Pseudospectral Method

PubMed Central

Zhou, Rui; Jin, Xuelian

2014-01-01

Of the many direct numerical methods, the pseudospectral method serves as an effective tool to solve the reentry trajectory optimization for hypersonic vehicles. However, the traditional pseudospectral method is time-consuming due to large number of discretization points. For the purpose of autonomous and adaptive reentry guidance, the research herein presents a multistage trajectory control strategy based on the pseudospectral method, capable of dealing with the unexpected situations in reentry flight. The strategy typically includes two subproblems: the trajectory estimation and trajectory refining. In each processing stage, the proposed method generates a specified range of trajectory with the transition of the flight state. The full glide trajectory consists of several optimal trajectory sequences. The newly focused geographic constraints in actual flight are discussed thereafter. Numerical examples of free-space flight, target transition flight, and threat avoidance flight are used to show the feasible application of multistage pseudospectral method in reentry trajectory optimization. PMID:24574929

Multi-stage phononic crystal structure for anchor-loss reduction of thin-film piezoelectric-on-silicon microelectromechanical-system resonator

NASA Astrophysics Data System (ADS)

Bao, Fei-Hong; Bao, Lei-Lei; Li, Xin-Yi; Ammar Khan, Muhammad; Wu, Hua-Ye; Qin, Feng; Zhang, Ting; Zhang, Yi; Bao, Jing-Fu; Zhang, Xiao-Sheng

2018-06-01

Thin-film piezoelectric-on-silicon acoustic wave resonators are promising for the development of system-on-chip integrated circuits with micro/nano-engineered timing reference. However, in order to realize their large potentials, a further enhancement of the quality factor (Q) is required. In this study, a novel approach, based on a multi-stage phononic crystal (PnC) structure, was proposed to achieve an ultra-high Q. A systematical study revealed that the multi-stage PnC structure formed a frequency-selective band-gap to effectively prohibit the dissipation of acoustic waves through tethers, which significantly reduced the anchor loss, leading to an insertion-loss reduction and enhancement of Q. The maximum unloaded Q u of the fabricated resonators reached the value of ∼10,000 at 109.85 MHz, indicating an enhancement by 19.4 times.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doktorov, Alexander B., E-mail: doktorov@kinetics.nsc.ru

Manifestations of the “cage” effect at the encounters of reactants have been theoretically treated on the example of multistage reactions (including bimolecular exchange reactions as elementary stages) proceeding from different active sites in liquid solutions. It is shown that for reactions occurring near the contact of reactants, consistent consideration of quasi-stationary kinetics of such multistage reactions (possible in the framework of the encounter theory only) can be made on the basis of chemical concepts of the “cage complex,” just as in the case of one-site model described in the literature. Exactly as in the one-site model, the presence of themore » “cage” effect gives rise to new channels of reactant transformation that cannot result from elementary event of chemical conversion for the given reaction mechanism. Besides, the multisite model demonstrates new (as compared to one-site model) features of multistage reaction course.« less

An integrated experimental and theoretical reaction path search: analyses of the multistage reaction of an ionized diethylether dimer involving isomerization, proton transfer, and dissociation.

PubMed

Matsuda, Yoshiyuki; Xie, Min; Fujii, Asuka

2018-05-30

An ionization-induced multistage reaction of an ionized diethylether (DEE) dimer involving isomerization, proton transfer, and dissociation is investigated by combining infrared (IR) spectroscopy, tandem mass spectrometry, and a theoretical reaction path search. The vertically-ionized DEE dimer isomerizes to a hydrogen-bonded cluster of protonated DEE and the [DEE-H] radical through barrierless intermolecular proton transfer from the CH bond of the ionized moiety. This isomerization process is confirmed by IR spectroscopy and the theoretical reaction path search. The multiple dissociation pathways following the isomerization are analyzed by tandem mass spectrometry. The isomerized cluster dissociates stepwise into a [protonated DEE-acetaldehyde (AA)] cluster, protonated DEE, and protonated AA. The structure of the fragment ion is also analyzed by IR spectroscopy. The reaction map of the multistage processes is revealed through a harmony of these experimental and theoretical methods.

An inexact multistage fuzzy-stochastic programming for regional electric power system management constrained by environmental quality.

PubMed

Fu, Zhenghui; Wang, Han; Lu, Wentao; Guo, Huaicheng; Li, Wei

2017-12-01

Electric power system involves different fields and disciplines which addressed the economic system, energy system, and environment system. Inner uncertainty of this compound system would be an inevitable problem. Therefore, an inexact multistage fuzzy-stochastic programming (IMFSP) was developed for regional electric power system management constrained by environmental quality. A model which concluded interval-parameter programming, multistage stochastic programming, and fuzzy probability distribution was built to reflect the uncertain information and dynamic variation in the case study, and the scenarios under different credibility degrees were considered. For all scenarios under consideration, corrective actions were allowed to be taken dynamically in accordance with the pre-regulated policies and the uncertainties in reality. The results suggest that the methodology is applicable to handle the uncertainty of regional electric power management systems and help the decision makers to establish an effective development plan.

Characterization of agricultural land using singular value decomposition

NASA Astrophysics Data System (ADS)

Herries, Graham M.; Danaher, Sean; Selige, Thomas

1995-11-01

A method is defined and tested for the characterization of agricultural land from multi-spectral imagery, based on singular value decomposition (SVD) and key vector analysis. The SVD technique, which bears a close resemblance to multivariate statistic techniques, has previously been successfully applied to problems of signal extraction for marine data and forestry species classification. In this study the SVD technique is used as a classifier for agricultural regions, using airborne Daedalus ATM data, with 1 m resolution. The specific region chosen is an experimental research farm in Bavaria, Germany. This farm has a large number of crops, within a very small region and hence is not amenable to existing techniques. There are a number of other significant factors which render existing techniques such as the maximum likelihood algorithm less suitable for this area. These include a very dynamic terrain and tessellated pattern soil differences, which together cause large variations in the growth characteristics of the crops. The SVD technique is applied to this data set using a multi-stage classification approach, removing unwanted land-cover classes one step at a time. Typical classification accuracy's for SVD are of the order of 85-100%. Preliminary results indicate that it is a fast and efficient classifier with the ability to differentiate between crop types such as wheat, rye, potatoes and clover. The results of characterizing 3 sub-classes of Winter Wheat are also shown.

Environment factors associated with adolescents' body mass index, physical activity and physical fitness in Kuching South City, Sarawak: a cross-sectional study.

PubMed

Cheah, Whye L; Chang, Ching T; Saimon, Rosalia

2012-01-01

This study examined the relationship between perceived built environment attributes and physical activity, physical fitness and body weight among adolescents aged 14-16 years in Sarawak. This was a cross-sectional study, using multi-stage sampling. A set of questionnaires consisting of socio-demographic information, a self-administered physical activity checklist and a Neighborhood Environment Walkability Scale-Youth (NEWS-Y) was used. Body mass index (BMI) was measured and physical fitness was tested using a maximal multistage 20 m shuttle run test. Data analysis was done using SPSS version 17.0. A total of 316 respondents participated. The mean BMI for boys was almost equal to the mean BMI for girls. Only 7.9% of the sampled population was found to be overweight or obese. The overall mean duration spent per day on physical activity was 128.4 min (SD 118.43), with mean of 56.1 min (SD 73.94) after school time. Girls reported to spend longer each day taking physical activity before and during school. Boys were found to have significantly higher VO2max of 27.79±5.91 mL/kg/min as compared to girls (t=11.22, p<0.000). Based on comparison with other countries, the NEWS-Y scores indicated a mixture of low and high walkability neighborhoods. Respondents who had lower BMIs reported living in lower residential density areas and less risk of crime, and respondents who had better physical fitness reported less suitable infrastructure for walking. Promotion of exercise at all levels should be continuously encouraged as it would lead to improvement in the well-being of an individual.

The use of decision tree induction and artificial neural networks for recognizing the geochemical distribution patterns of LREE in the Choghart deposit, Central Iran

NASA Astrophysics Data System (ADS)

Zaremotlagh, S.; Hezarkhani, A.

2017-04-01

Some evidences of rare earth elements (REE) concentrations are found in iron oxide-apatite (IOA) deposits which are located in Central Iranian microcontinent. There are many unsolved problems about the origin and metallogenesis of IOA deposits in this district. Although it is considered that felsic magmatism and mineralization were simultaneous in the district, interaction of multi-stage hydrothermal-magmatic processes within the Early Cambrian volcano-sedimentary sequence probably caused some epigenetic mineralizations. Secondary geological processes (e.g., multi-stage mineralization, alteration, and weathering) have affected on variations of major elements and possible redistribution of REE in IOA deposits. Hence, the geochemical behaviors and distribution patterns of REE are expected to be complicated in different zones of these deposits. The aim of this paper is recognizing LREE distribution patterns based on whole-rock chemical compositions and automatic discovery of their geochemical rules. For this purpose, the pattern recognition techniques including decision tree and neural network were applied on a high-dimensional geochemical dataset from Choghart IOA deposit. Because some data features were irrelevant or redundant in recognizing the distribution patterns of each LREE, a greedy attribute subset selection technique was employed to select the best subset of predictors used in classification tasks. The decision trees (CART algorithm) were pruned optimally to more accurately categorize independent test data than unpruned ones. The most effective classification rules were extracted from the pruned tree to describe the meaningful relationships between the predictors and different concentrations of LREE. A feed-forward artificial neural network was also applied to reliably predict the influence of various rock compositions on the spatial distribution patterns of LREE with a better performance than the decision tree induction. The findings of this study could be effectively used to visualize the LREE distribution patterns as geochemical maps.

Unsteady Flow Field in a Multistage Axial Flow Compressor

NASA Technical Reports Server (NTRS)

Suryavamshi, N.; Lakshminarayana, B.; Prato, J.

1997-01-01

The flow field in a multistage compressor is three-dimensional, unsteady, and turbulent with substantial viscous effects. Some of the specific phenomena that has eluded designers include the effects of rotor-stator and rotor-rotor interactions and the physics of mixing of velocity, pressure, temperature and velocity fields. An attempt was made, to resolve experimentally, the unsteady pressure and temperature fields downstream of the second stator of a multistage axial flow compressor which will provide information on rotor-stator interaction effects and the nature of the unsteadiness in an embedded stator of a three stage axial flow compressor. Detailed area traverse measurements using pneumatic five hole probe, thermocouple probe, semi-conductor total pressure probe (Kulite) and an aspirating probe downstream of the second stator were conducted at the peak efficiency operating condition. The unsteady data was then reduced through an ensemble averaging technique which splits the signal into deterministic and unresolved components. Auto and cross correlation techniques were used to correlate the deterministic total temperature and velocity components (acquired using a slanted hot-film probe at the same measurement locations) and the gradients, distributions and relative weights of each of the terms of the average passage equation were then determined. Based on these measurements it was observed that the stator wakes, hub leakage flow region, casing endwall suction surface corner region, and the casing endwall region away from the blade surfaces were the regions of highest losses in total pressure, lowest efficiency and highest levels of unresolved unsteadiness. The deterministic unsteadiness was found to be high in the hub and casing endwall regions as well as on the pressure side of the stator wake. The spectral distribution of hot-wire and kulite voltages shows that at least eight harmonics of all three rotor blade passing frequencies are present at this measurement location. In addition to the basic three rotor blade passing frequencies (R1, R2 and R3) and their harmonics, various difference frequencies such as (2R1 -R2) and (2R3-R2) and their harmonics are also observed. These difference frequencies are due to viscous and potential interactions between rotors 1, 2 and 3 which are sensed by both the total pressure and aspirating probes at this location. Significant changes occur to the stator exit flow features with passage of the rotor upstream of the stator. Because of higher convection speeds of the rotor wake on the suction surface of the downstream stator than on the pressure side, the chopped rotor wake was found to be arriving at different times on either side of the stator wake. As the rotor passes across the stator.

One-Stage Gender-Confirmation Surgery as a Viable Surgical Procedure for Female-to-Male Transsexuals.

PubMed

Stojanovic, Borko; Bizic, Marta; Bencic, Marko; Kojovic, Vladimir; Majstorovic, Marko; Jeftovic, Milos; Stanojevic, Dusan; Djordjevic, Miroslav L

2017-05-01

Female-to-male gender-confirmation surgery (GCS) includes removal of breasts and female genitalia and complete genital and urethral reconstruction. With a multidisciplinary approach, these procedures can be performed in one stage, avoiding multistage operations. To present our results of one-stage sex-reassignment surgery in female-to-male transsexuals and to emphasize the advantages of single-stage over multistage surgery. During a period of 9 years (2007-2016), 473 patients (mean age = 31.5 years) underwent metoidioplasty. Of these, 137 (29%) underwent simultaneous hysterectomy, and 79 (16.7%) underwent one-stage GCS consisting of chest masculinization, total transvaginal hysterectomy with bilateral adnexectomy, vaginectomy, metoidioplasty, urethral lengthening, scrotoplasty, and implantation of bilateral testicular prostheses. All surgeries were performed simultaneously by teams of experienced gynecologic and gender surgeons. Primary outcome measurements were surgical time, length of hospital stay, and complication and reoperation rates compared with other published data and in relation to the number of stages needed to complete GCS. Mean follow-up was 44 months (range = 10-92). Mean surgery time was 270 minutes (range = 215-325). Postoperative hospital stay was 3 to 6 days (mean = 4). Complications occurred in 20 patients (25.3%). Six patients (7.6%) had complications related to mastectomy, and one patient underwent revision surgery because of a breast hematoma. Two patients underwent conversion of transvaginal hysterectomy to an abdominal approach, and subcutaneous perineal cyst, as a consequence of colpocleisis, occurred in nine patients. There were eight complications (10%) from urethroplasty, including four fistulas, three strictures, and one diverticulum. Testicular implant rejection occurred in two patients and testicular implant displacement occurred in one patient. Female-to-male transsexuals can undergo complete GCS, including mastectomy, hysterectomy, oophorectomy, vaginectomy, and metoidioplasty with urethral reconstruction as a one-stage procedure without increased surgical risks and complication rates. To our knowledge, this is the largest cohort on this topic so far, with good surgical outcomes. Limitations include lack of selection or exclusion criteria and lack of other studies with a simple approach. For this reason, the technique should be studied further and compared with other techniques for female-to-male surgery before it can be recommended as an alternative procedure. Through a multidisciplinary approach of experienced teams, one-stage GCS presents a safe, viable, and time- and cost-saving procedure. Complication rates do not differ from reported rates in multistage surgeries. Stojanovic B, Bizic M, Bencic M, et al. One-Stage Gender-Confirmation Surgery as a Viable Surgical Procedure for Female-to-Male Transsexuals. J Sex Med 2017;14:741-746. Copyright © 2017 International Society for Sexual Medicine. Published by Elsevier Inc. All rights reserved.

Into the Bowels of Depression: Unravelling Medical Symptoms Associated with Depression by Applying Machine-Learning Techniques to a Community Based Population Sample.

PubMed

Dipnall, Joanna F; Pasco, Julie A; Berk, Michael; Williams, Lana J; Dodd, Seetal; Jacka, Felice N; Meyer, Denny

2016-01-01

Depression is commonly comorbid with many other somatic diseases and symptoms. Identification of individuals in clusters with comorbid symptoms may reveal new pathophysiological mechanisms and treatment targets. The aim of this research was to combine machine-learning (ML) algorithms with traditional regression techniques by utilising self-reported medical symptoms to identify and describe clusters of individuals with increased rates of depression from a large cross-sectional community based population epidemiological study. A multi-staged methodology utilising ML and traditional statistical techniques was performed using the community based population National Health and Nutrition Examination Study (2009-2010) (N = 3,922). A Self-organised Mapping (SOM) ML algorithm, combined with hierarchical clustering, was performed to create participant clusters based on 68 medical symptoms. Binary logistic regression, controlling for sociodemographic confounders, was used to then identify the key clusters of participants with higher levels of depression (PHQ-9≥10, n = 377). Finally, a Multiple Additive Regression Tree boosted ML algorithm was run to identify the important medical symptoms for each key cluster within 17 broad categories: heart, liver, thyroid, respiratory, diabetes, arthritis, fractures and osteoporosis, skeletal pain, blood pressure, blood transfusion, cholesterol, vision, hearing, psoriasis, weight, bowels and urinary. Five clusters of participants, based on medical symptoms, were identified to have significantly increased rates of depression compared to the cluster with the lowest rate: odds ratios ranged from 2.24 (95% CI 1.56, 3.24) to 6.33 (95% CI 1.67, 24.02). The ML boosted regression algorithm identified three key medical condition categories as being significantly more common in these clusters: bowel, pain and urinary symptoms. Bowel-related symptoms was found to dominate the relative importance of symptoms within the five key clusters. This methodology shows promise for the identification of conditions in general populations and supports the current focus on the potential importance of bowel symptoms and the gut in mental health research.

Development of Optical Crystals for High Power and Tunable Visible and Infrared Light Generation

DTIC Science & Technology

2015-02-11

ultra high chemical purity (5N), 95% isotopically enriched 6Li was purified in a multi-stage vacuum distillation process previously reported by...enriched 6Li was purified in a multi-stage vacuum distillation process previously reported by Stowe et al.[4]. 6LiIn alloy was synthesized in a... quantum mechanics, it has been determined that atoms, molecules, ions have discrete energy levels. Therefore there exists allowed atomic transitions

Fuel system for diesel engine with multi-stage heated

NASA Astrophysics Data System (ADS)

Ryzhov, Yu N.; Kuznetsov, Yu A.; Kolomeichenko, A. V.; Kuznetsov, I. S.; Solovyev, R. Yu; Sharifullin, S. N.

2017-09-01

The article describes a fuel system of a diesel engine with a construction tractor multistage heating, allowing the use of pure rapeseed oil as a diesel engine fuel. The paper identified the kinematic viscosity depending on the temperature and composition of the mixed fuel, supplemented by the existing recommendations on the use of mixed fuels based on vegetable oils and developed the device allowing use as fuel for diesel engines of biofuels based on vegetable oils.