Structural Analysis and Application of n-Alkyl Cyanoacrylate Surgical Adhesives to the Fixation of Meshes for Hernia Repair.

PubMed

Fernández-Gutiérrez, Mar; Rodriguez-Mancheño, Marta; Pérez-Köhler, Bárbara; Pascual, Gemma; Bellón, Juan Manuel; Román, Julio San

2016-12-01

The article deals with a comparative analysis of the parameters of the polymerization in physiological conditions of three commercially available alkyl cyanoacrylates, n-butyl cyanoacrylate (GLUBRAN 2), n-hexyl cyanoacrylate (IFABOND), and n-octyl cyanoacrylate (EVOBOND), the cell behavior of the corresponding polymers and the application of these adhesives in the fixation of surgical polypropylene meshes for hernia repair in an animal model of rabbits. The results obtained demonstrate that the curing process depends on the nature of the alkyl residue of the ester group of cyanoacrylate molecules, being the heat of polymerization lower for the octyl derivative in comparison with the hexyl and butyl, and reaching a maximum temperature of 35 °C after a time of mixing with physiological fluids of 60-70 s. The cell behavior demonstrates that the three systems do not present toxicity for fibroblasts and low adhesion of cells, which is a positive result for application as tissue adhesives, especially for the fixation of abdominal polypropylene meshes for hernia repair. The animal experimentation indicates the excellent tolerance of the meshes fixed with the cyanoacrylic adhesives, during at least a period of 90 d, and guarantees a good adhesion for the application of hernia repair meshes. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Preliminary Experience of Endovascular Embolization Using N-Butyl Cyanoacrylate for Hemoptysis due to Infectious Pulmonary Artery Pseudoaneurysms via Systemic Arterial Approach.

PubMed

Torikai, Hideyuki; Hasegawa, Ichiro; Jinzaki, Masahiro; Narimatsu, Yoshiaki

2017-10-01

We report 5 patients with hemoptysis due to infectious pulmonary artery pseudoaneurysm (PAP) treated with endovascular embolization using N-butyl cyanoacrylate (NBCA) injected via bronchial and nonbronchial systemic arterial approaches. Infectious diseases included inactive tuberculosis (n = 3), nontuberculous mycobacteriosis (n = 1), and chronic infection of unknown origin (n = 1). Seven PAPs were detected on selective systemic angiography, and injection of NBCA was performed. Disappearance of all PAPs was confirmed on systemic arteriography after the intervention. In all patients, hemoptysis was stopped without major complications, and it did not recur during the follow-up period (mean, 351 d; range, 285-427 d). Copyright © 2016 SIR. Published by Elsevier Inc. All rights reserved.

Recanalization after successful occlusion by transcatheter arterial embolization with N-butyl cyanoacrylate for traumatic splenic artery injury.

PubMed

Ishikawa, Masaki; Kakizawa, Hideaki; Yamasaki, Wataru; Date, Syuji; Hieda, Masashi; Kajiwara, Kenji; Awai, Kazuo

2011-12-01

A 70-year-old male with advanced pancreatic cancer went into shock after sustaining a traumatic abdominal injury. Computed tomography (CT) showed a hematoma with extravasation around the pancreas and hemorrhagic ascites. After direct catheterization failed due to angiospasm, the ruptured splenic artery was successfully occluded by transcatheter arterial embolization (TAE) using an N-butyl cyanoacrylate (NBCA)-lipiodol mixture and the patient recovered from shock without complications. A follow-up CT obtained 20 days later showed a recurrent splenic artery pseudoaneurysm without extravasation. A repeat angiogram demonstrated recanalization of the splenic artery and pseudoaneurysm via antegrade. We embolized the recanalized pseudoaneurysm using metallic coils for isolation. Our experience indicates that adequate concentration and volume of the NBCA-lipiodol mixture should be considered depending on the vascular spasm in a patient with hypovolemic shock.

A New Flow Control Technique Using Diluted Epinephrine in the N-butyl-2-cyanoacrylate Embolization of Visceral Artery Pseudoaneurysms Secondary to Chronic Pancreatitis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morishita, Hiroyuki, E-mail: hmorif@koto.kpu-m.ac.jp; Yamagami, Takuji; Takeuchi, Yoshito

2012-08-15

Although n-butyl-2-cyanoacrylate (NBCA) has been used as an effective liquid embolization material, its indication for pseudoaneurysms has seemingly been limited because of the technical difficulties of using NBCA, such as reflux to the parent artery and causing significant infarction. Thus, considerable skill in using NBCA or a device to control blood flow during its polymerization is required to achieve embolization without severe complications. We report our new technique for controlling blood flow using diluted epinephrine in transcatheter arterial NBCA embolization of five pseudoaneurysms in four cases secondary to hemosuccus pancreaticus.

Genuine splenic artery aneurysm rupture treated by N‐butyl cyanoacrylate and metallic coils under resuscitative endovascular balloon occlusion of the aorta

PubMed Central

Hagiwara, Shuichi; Miyazaki, Masaya; Kaneko, Minoru; Murata, Masato; Nakajima, Jun; Ohyama, Yoshio; Tamura, Jun'ichi; Tsushima, Yoshito; Oshima, Kiyohiro

2016-01-01

Case A 66 year‐old woman who presented with sudden lower abdominal pain was transferred to our emergency room. Vital signs were stable on arrival at the hospital, but immediately became unstable. Systolic/diastolic blood pressure and heart rate were 66/33 mmHg and 70 b.p.m., respectively. Computed tomography scanning showed splenic artery aneurysm rupture and extravasation. The patient was treated non‐operatively and definitively by endovascular therapy comprising resuscitative endovascular occlusion of the aorta for hemodynamic control, N‐butyl cyanoacrylate, and metallic coils as an embolization material. Outcome On admission day 3, she was enrolled in another department and admission day 54, she was discharged. Conclusion Although resuscitative endovascular occlusion of the aorta and N‐butyl cyanoacrylate is known to be effective, the use of resuscitative endovascular occlusion of the aorta with transcatheter arterial embolization and N‐butyl cyanoacrylate for non‐traumatic bleeding has not previously been reported. By combining and adapting these devices, their applications in endovascular management may be increased. PMID:29123801

Cystoscopic injection of N-butyl-2-cyanoacrylate followed by fibrin glue for the treatment of persistent or massive vesicourethral anastomotic urine leak after radical prostatectomy.

PubMed

Lim, Ju Hyun; You, Dalsan; Jeong, In Gab; Park, Hyung Keun; Ahn, Hanjong; Kim, Choung-Soo

2013-10-01

Vesicourethral anastomotic urine leak is a common postoperative complication of radical prostatectomy. Herein we describe a novel method for the treatment of this complication. Intervention for a prolonged or massive anastomotic urine leak was required in 10 out of 1828 patients (0.5%) submitted to radical prostatectomy between 2007 and 2011. N-butyl-2-cyanoacrylate (Histoacryl) followed by fibrin glue (Greenplast) were injected under local anesthesia into vesicourethral anastomotic gaps under fluoroscopic guidance using a 20-Fr rigid cystoscope. Cystograms were taken in all patients to confirm complete urine leak resolution before the removal of the urethral catheter. Cystoscopic injection of Histoacryl followed by fibrin glue was technically successful and well tolerated in all patients. The mean time from radical prostatectomy to glue injection was 16.0 days (range 12-27 days). Urethral catheterization was required for an average of 7.7 days after cystoscopic injection of fibrin glue (range 3-13 days). These measures ultimately enabled complete resolution of the urine leak in all cases. At a mean follow up of 23.3 months, all 10 patients were fully continent. The mean time to recovery of urinary continence was 20.4 weeks (range 3.9-60.0 weeks). Cystoscopic injection of N-butyl-2-cyanoacrylate followed by fibrin glue into the anastomotic gap is both a feasible and effective solution in patients with a persistent or massive vesicourethral anastomotic urine leak after radical prostatectomy. © 2013 The Japanese Urological Association.

Transcatheter Arterial Embolization with N-Butyl-2-Cyanoacrylate in the Management of Spontaneous Hematomas.

PubMed

Ozyer, Umut

2017-01-01

Spontaneous hematoma refractory to conservative management is a potentially serious condition that requires prompt diagnosis and intervention. The purpose of this study was to evaluate the performance of computed tomography (CT) in the treatment planning and to report the effectiveness of transcatheter embolization with N-butyl-2-cyanoacrylate (NBCA). Forty-one interventions in 38 patients within a 12-year period were evaluated. CT and angiograms were reviewed for the location of the hematoma, the presence of extravasation, and the correlation of CT and angiography findings. Arterial extravasation was present on 34/39 CT scans. Angiograms confirmed the CT scans in 29 cases. Angiograms revealed extravasation in four cases which CT showed venous bleeding (n = 2) or no bleeding (n = 2). Five patients with arterial and 1 patient with venous extravasation on CT images had no extravasation on angiograms. Embolization was performed to all arteries with extravasation on angiograms. Empiric embolization of the corresponding artery on the CT was performed when there was no extravasation on angiograms. Embolization procedures were performed with 15 % NBCA diluted with iodized oil. Technical success was achieved in 40/41 (97.6 %) interventions. Clinical success was achieved in 35 patients with a single, in 1 patient with 2, and in 1 patient with 3 interventions. No complications related to embolization procedure occurred. None of the patients died due to a progression of the hematoma. NBCA is an effective and safe embolic agent to treat hematoma refractory to conservative management. Contrast-enhanced CT may provide faster and more effective intervention. Retrospective.

Percutaneous protective coil occlusion of the proximal inferior mesenteric artery before N-butyl cyanoacrylate embolization of type II endoleaks after endovascular repair of abdominal aortic aneurysms.

PubMed

Chao, Christine P; Paz-Fumagalli, Ricardo; Walser, Eric M; McKinney, J Mark; Stockland, Andrew H; Falkensammer, Jürgen; Hakaim, Albert G; Oldenburg, W Andrew

2006-11-01

Bowel ischemia can complicate treatment of type II endoleak with liquid or semiliquid agents such as n-butyl cyanoacrylate (NBCA) if nontarget embolization of the inferior mesenteric artery (IMA) occurs. The current report describes four cases of type II endoleak in which the IMA was the main outflow vessel and was prophylactically occluded with embolization coils before NBCA injection into the endoleak nidus. The purpose was to prevent unintentional embolization of the NBCA into IMA branches. If feasible, protective IMA coil occlusion should be considered in type II endoleaks with IMA outflow in cases of NBCA embolization.

Transcatheter Arterial Embolization with N-Butyl-2-Cyanoacrylate in the Management of Spontaneous Hematomas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ozyer, Umut, E-mail: umutozyer@gmail.com

IntroductionSpontaneous hematoma refractory to conservative management is a potentially serious condition that requires prompt diagnosis and intervention. The purpose of this study was to evaluate the performance of computed tomography (CT) in the treatment planning and to report the effectiveness of transcatheter embolization with N-butyl-2-cyanoacrylate (NBCA).Materials and MethodsForty-one interventions in 38 patients within a 12-year period were evaluated. CT and angiograms were reviewed for the location of the hematoma, the presence of extravasation, and the correlation of CT and angiography findings.ResultsArterial extravasation was present on 34/39 CT scans. Angiograms confirmed the CT scans in 29 cases. Angiograms revealed extravasation inmore » four cases which CT showed venous bleeding (n = 2) or no bleeding (n = 2). Five patients with arterial and 1 patient with venous extravasation on CT images had no extravasation on angiograms. Embolization was performed to all arteries with extravasation on angiograms. Empiric embolization of the corresponding artery on the CT was performed when there was no extravasation on angiograms. Embolization procedures were performed with 15 % NBCA diluted with iodized oil. Technical success was achieved in 40/41 (97.6 %) interventions. Clinical success was achieved in 35 patients with a single, in 1 patient with 2, and in 1 patient with 3 interventions. No complications related to embolization procedure occurred. None of the patients died due to a progression of the hematoma.ConclusionNBCA is an effective and safe embolic agent to treat hematoma refractory to conservative management. Contrast-enhanced CT may provide faster and more effective intervention.Level of Evidence IIIRetrospective.« less

Endovascular Embolization of Intracranial Infectious Aneurysms in Patients Undergoing Open Heart Surgery Using n-Butyl Cyanoacrylate.

PubMed

Cheng-Ching, Esteban; John, Seby; Bain, Mark; Toth, Gabor; Masaryk, Thomas; Hui, Ferdinand; Hussain, Muhammad Shazam

2017-03-01

Mycotic aneurysms are a serious complication of infective endocarditis with increased risk of intracranial hemorrhage. Patients undergoing open heart surgery for valve repair or replacement are exposed to anticoagulants, increasing the risk of aneurysm bleeding. These patients may require endovascular or surgical aneurysm treatment prior to heart surgery, but data on this approach are scarce. Retrospective review of consecutive patients with infectious endocarditis and mycotic aneurysms treated endovascularly with Trufill n-butyl cyanoacrylate (n-BCA) at the Cleveland Clinic between January 2013 and December 2015. Nine patients underwent endovascular treatment of mycotic aneurysms with n-BCA (mean age of 39 years). On imaging, 4 patients had intracerebral hemorrhage, 2 had multiple embolic infarcts, and the rest had no imaging findings. Twelve mycotic aneurysms were detected (3 patients with 2 aneurysms). Seven aneurysms were in the M4 middle cerebral artery segment, 4 in the posterior cerebral artery distribution, and 1 in the callosomarginal branch. n-BCA was diluted in ethiodized oil (1:1 to 1:2). Embolization was achieved in a single rapid injection with immediate microcatheter removal. Complete aneurysm exclusion was achieved in all cases without complications. All patients underwent open heart surgery and endovascular embolization within a short interval, 2 with both procedures on the same day. There were no new hemorrhages after aneurysm embolization. Endovascular embolization of infectious intracranial aneurysms with liquid embolics can be performed successfully in critically ill patients requiring immediate open heart surgery and anticoagulation. Early embolization prior to and within a short interval from open heart surgery is feasible.

Selective transarterial embolization with n-butyl-2-cyanoacrylate for the treatment of arterial hemorrhage after third molar extraction.

PubMed

Sagara, Yoshiko; Kiyosue, Hiro; Tanoue, Shuichi; Shimada, Ryuichi; Hongo, Norio; Kohno, Tatsuyuki; Kawano, Kenji; Mori, Hiromu

2013-06-01

Comprehensive reports concerning selective embolization for arterial bleeding from third molar removal have not been published. We analyzed cases of arterial bleeding from third molar extraction that required transarterial embolization, and we demonstrate representative cases. Five consecutive patients (three men and two women, aged 24 to 37 years) who underwent transarterial embolization at our institution were included in this study. Four of them showed postoperative bleeding after lower third molar removal, and one suffered bleeding after upper third molar extraction. The period of time from extraction to embolization varied from 5 h to 5 weeks. Angiography revealed pseudoaneurysms at the inferior alveolar artery in four cases and at the superior alveolar artery in one case. The pseudoaneurysms were selectively embolized using 25-33 % n-butyl-2-cyanoacrylate (NBCA)-lipiodol. All of the cases showed good results angiographically and clinically. Transit hypoesthesia at the region of the mental nerve was observed in one patient. Selective transarterial embolization is an effective technique for arterial bleeding from third molar removal when it is difficult to obtain hemostasis by dental procedures. Injection of NBCA can be useful when the alveolar artery is too small to embolize with coils.

Transcatheter Arterial Embolization with n-Butyl Cyanoacrylate for the Treatment of Acquired Uterine Vascular Malformations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Picel, Andrew C., E-mail: apicel@ucsd.edu; Koo, Sonya J.; Roberts, Anne C.

PurposeThe purpose of the study was to evaluate the technique and outcomes of transcatheter arterial embolization (TAE) with n-butyl cyanoacrylate (NBCA) for the treatment of acquired uterine arteriovenous malformations (AVMs).Materials and methodsA retrospective review identified five women treated for suspected acquired uterine AVMs with TAE at our institution. Four women (80 %) presented with heavy or intermittent vaginal bleeding after obstetric manipulation. One woman (20 %) was treated for an incidental AVM discovered on ultrasound after an uncomplicated cesarean section. Three women underwent one embolization procedure and two women required two procedures. Embolization material included NBCA in six procedures (80 %) and gelatinmore » sponge in one procedure (20 %).ResultsEmbolization resulted in angiographic stasis of flow in all seven procedures. Four women (80 %) presented with vaginal bleeding which was improved after treatment. One woman returned 24 days after unilateral embolization with recurrent bleeding, which resolved after retreatment. One woman underwent two treatments for an asymptomatic lesion identified on ultrasound. There were no major complications. Three women (60 %) experienced mild postembolization pelvic pain that was controlled with non-steroidal anti-inflammatory drugs. Three women (60 %) had pregnancies and deliveries after embolization.ConclusionsTAE is a safe alternative to surgical therapy for acquired uterine AVMs with the potential to maintain fertility. Experience from this case series suggests that NBCA provides predictable and effective occlusion.« less

Dosimetric measurements of an n-butyl cyanoacrylate embolization material for arteriovenous malformations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Labby, Zacariah E., E-mail: zelabby@humonc.wisc.edu; Chaudhary, Neeraj; Gemmete, Joseph J.

2015-04-15

Purpose: The therapeutic regimen for cranial arteriovenous malformations often involves both stereotactic radiosurgery and endovascular embolization. Embolization agents may contain tantalum or other contrast agents to assist the neurointerventionalists, leading to concerns regarding the dosimetric effects of these agents. This study investigated dosimetric properties of n-butyl cyanoacrylate (n-BCA) plus lipiodol with and without tantalum powder. Methods: The embolization agents were provided cured from the manufacturer with and without added tantalum. Attenuation measurements were made for the samples and compared to the attenuation of a solid water substitute using a 6 MV photon beam. Effective linear attenuation coefficients (ELAC) were derivedmore » from attenuation measurements made using a portal imager and derived sample thickness maps projected in an identical geometry. Probable dosimetric errors for calculations in which the embolized regions are overridden with the properties of water were calculated using the ELAC values. Interface effects were investigated using a parallel plate ion chamber placed at set distances below fixed samples. Finally, Hounsfield units (HU) were measured using a stereotactic radiosurgery CT protocol, and more appropriate HU values were derived from the ELAC results and the CT scanner’s HU calibration curve. Results: The ELAC was 0.0516 ± 0.0063 cm{sup −1} and 0.0580 ± 0.0091 cm{sup −1} for n-BCA without and with tantalum, respectively, compared to 0.0487 ± 0.0009 cm{sup −1} for the water substitute. Dose calculations with the embolized region set to be water equivalent in the treatment planning system would result in errors of −0.29% and −0.93% per cm thickness of n-BCA without and with tantalum, respectively. Interface effects compared to water were small in magnitude and limited in distance for both embolization materials. CT values at 120 kVp were 2082 and 2358 HU for n-BCA without and with tantalum

Efficacy and safety of two different n-butyl-2-cyanoacrylates for the embolization of varicoceles: a prospective, randomized, blinded study.

PubMed

Vanlangenhove, Peter; De Keukeleire, Katrien; Everaert, Karel; Van Maele, Georges; Defreyne, Luc

2012-06-01

This was a prospective, randomized, blinded comparative study of the efficacy and safety of two different n-butyl-2-cyanoacrylates (NBCAs) for embolization of varicoceles. A total of 112 insufficient spermatic veins (left-sided, n=84; right-sided, n=28) that were diagnosed in 83 adult males were prospectively randomized for blinded embolization with NBCA (n=54; Histoacryl, Braun, Germany) or NBCA-MS (n=58; Glubran2, General Enterprise Marketing, Viareggio, Lucca, Italy). Handling, embolic efficacy, and safety of both NBCAs were compared according the fulfillment of a standardized embolization plan, the occlusive effect on the spermatic vein, and the sticking to the microcatheter. Statistical analysis was performed with the Mann-Whitney U test and the Fisher's exact test. Patients of both study arms were comparable for age and clinical indication. Spermatic vein characteristics were comparable for varicocele classification and embolization side. Both NBCAs were equally efficient in occluding the spermatic vein and blocking reflux (NBCA, n=54/54, 100% vs. NBCA-MS, n=54/57, 94.7%; P=0.244). The embolization plan could be accomplished in an equal number of veins for both groups (NBCA, n=45/54, 83.3% vs. NBCA-MS, n=41/58, 70.7%; P=0.124). Adhesiveness of the glue to the microcatheter was the same in both NBCA groups (NBCA, n=25/54, 46.3% vs. NBCA-MS, n=29/58, 50%; P=0.71). No glue-related complications were noted. NBCA and NBCA-MS are equally efficient and safe glues for embolization of varicoceles.

Portal Vein Embolization before Right Hepatectomy: Improved Results Using n-Butyl-Cyanoacrylate Compared to Microparticles Plus Coils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guiu, Boris, E-mail: boris.guiu@chu-dijon.fr; Bize, Pierre; Gunthern, Daniel

Background: There is currently no consensus in the literature on which embolic agent induces the greatest degree of liver hypertrophy after portal vein embolization (PVE). Only experimental results in a pig model have demonstrated an advantage of n-butyl-cyanoacrylate (NBCA) over 3 other embolic materials (hydrophilic gel, small and large polyvinyl alcohol particles) for PVE. Therefore, the aim of this human study was to retrospectively compare the results of PVE using NBCA with those using spherical microparticles plus coils. Methods: A total of 34 patients underwent PVE using either NBCA (n = 20), or spherical microparticles plus coils (n = 14).more » PVE was decided according to preoperative volumetry on the basis of contrast-enhanced CT. Groups were compared for age, sex, volume of the left lobe before PVE and future remnant liver ratio (FRL) (volume of the left lobe/total liver volume - tumor volume). The primary end point was the increase in left lobe volume 1 month after PVE. Secondary end points were procedure complications and biological tolerance. Results: Both groups were similar in terms of age, sex ratio, left lobe volume, and FRL before PVE. NBCA induced a greater increase in volume after PVE than did microparticles plus coils (respectively, +74 {+-} 69 % and +23 {+-} 14 %, p < 0.05). The amount of contrast medium used for the procedure was significantly larger when microparticles and coils rather than NBCA were used (respectively, 264 {+-} 43 ml and 162 {+-} 34 ml, p < 0.01). The rate of PVE complications as well as the biological tolerance was similar in both groups. Conclusion: NBCA seems more effective than spherical microparticles plus coils to induce left-lobe hypertrophy.« less

Protective effects of poly (butyl) cyanoacrylate nanoparticles containing vasoactive intestinal peptide against 6-hydroxydopamine-induced neurotoxicity in vitro.

PubMed

Xu, Zhi-Ran; Wang, Wu-Fang; Liang, Xin-Fang; Liu, Ze-Hua; Liu, Yu; Lin, Liang; Zhu, Xuan

2015-04-01

The present study investigated brain delivery system of vasoactive intestinal peptide (VIP) adsorbed on poly (butyl cyanoacrylate) nanoparticles coated with polysorbate 80 (P80-poly (butyl) cyanoacrylate (PBCA)-nanoparticles (NPs)) and the neuroprotective effects on the formulation in the model of 6-hydroxydopamine (6-OHDA)-induced Parkinsonian dysfunction in the human neuroblastoma cell line SH-SY5Y. Drug-loaded nanoparticles were prepared by emulsion polymerization method using VIP and PBCA and then stirring with polysorbate 80. The resulting nanoparticles possessed high entrapment efficiency and favorable stability against CaCl2 or fetal bovine serum (FBS)-induced aggregation. Use of fluorescein isothiocyanate (FITC)-conjugated polysorbate 80-PBCA nanoparticles in confocal microscopy revealed that nanoparticles are located inside, while the FITC solution could not penetrate into the cells. The blank nanoparticles showed no significant effects on cell viability, indicating that they had no role in protection; however, polysorbate 80-modified VIP-loading PBCA nanoparticles showed enhanced cell viability compared to free VIP in 6-OHDA-mimic cellular model of Parkinson's disease. In addition, the nanoparticles strikingly increased the anti-apoptosis activity and restored the loss of mitochondrial membrane potential (MMP) significantly after the treatment of 6-OHDA. These results demonstrated that the activity of VIP was enhanced by polysorbate 80-PBCA nanoparticles compared to control solutions, suggesting that PBCA nanoparticles coated with polysorbate 80 could be an effective carrier system for VIP.

Superselective Embolization for Arterial Upper Gastrointestinal Bleeding Using N-Butyl Cyanoacrylate: A Single-Center Experience in 152 Patients.

PubMed

Hur, Saebeom; Jae, Hwan Jun; Lee, Hyukjoon; Lee, Myungsu; Kim, Hyo-Cheol; Chung, Jin Wook

2017-12-01

To evaluate 30-day safety and efficacy of superselective embolization for arterial upper gastrointestinal bleeding (UGIB) using N-butyl cyanoacrylate (NBCA). This single-center retrospective 10-year study included 152 consecutive patients with UGIB (gastric, n = 74; duodenal, n = 78) who underwent embolization with NBCA for angiographically positive arterial bleeding. The primary endpoint was clinical success rate defined as achievement of hemostasis without rebleeding or UGIB-related mortality within 30 days after embolization. Mean systolic blood pressure and heart rate were 121.2 mm Hg ± 27.4 and 97.9 beats/minute ± 22.5; 31.1% of patients needed intravenous inotropes, and 36.6% had coagulopathy. The etiology of bleeding was ulcer (80.3%) or iatrogenic injury (19.7%). Statistical analysis was performed to identify predictive factors for outcomes. Technical success rate was 100%. Clinical success, 1-month mortality, and major complication rates were 70.4%, 22.4%, and 0.7%. There were significant differences in the clinical success rates between gastric and duodenal bleeding (79.4% vs 62.2%; P = .025). The need for intravenous inotropes at the time of embolization was a significant negative predictive factor in both gastric (odds ratio [OR] = 0.091, P = .004) and duodenal (OR = 0.156, P = .002) bleeding. The use of a microcatheter with a smaller tip (2 F) was associated with better outcomes in duodenal bleeding (OR = 7.389, P = .005). Superselective embolization using NBCA is safe and effective for angiographically positive arterial UGIB. Copyright © 2017 SIR. Published by Elsevier Inc. All rights reserved.

High-grade traumatic torso visceral injury with hemodynamic instability: effectiveness of transarterial embolization using n-butyl cyanoacrylate.

PubMed

Tsurukiri, Junya; Ohta, Shoichi; Hoshiai, Akira; Sano, Hidefumi; Okumura, Eitaro; Tsubouchi, Nobuhiko; Konishi, Hiroyuki; Yukioka, Tetsuo

2017-04-01

Trauma patients with uncontrolled hemorrhage encountering coagulopathy are often associated with poor outcome. Recently, the concept of damage control interventional radiology, which focuses on "speedy stoppage of bleeding" by interventional radiology among trauma patients with hemodynamic instability and acute traumatic coagulopathy, was proposed as an alternative to damage control surgery. N-butyl cyanoacrylate (NBCA) has been used as a liquid embolic agent in various non-traumatic situations, where it has been shown to have a high technical success rate and low recurrent bleeding rate, especially in patients with coagulopathy. In this case, we treated a young patient with hemodynamic instability caused by a high-grade hepatic injury, who underwent arterial embolization (AE) using NBCA assisted with resuscitative endovascular balloon occlusion of the aorta and achieved successful hemostasis. A review of published works using PUBMED was carried out, and 10 published reports involving 23 trauma patients who underwent AE using NBCA were identified. Among them, only four reports involving five trauma patients with torso visceral injuries were identified. Three of five patients who were hemodynamically unstable underwent AE using NBCA, resulting in the stabilization of hemodynamics. We concluded that AE with resuscitative endovascular balloon occlusion of the aorta as a damage control interventional radiology procedure might be acceptable for the hemodynamically unstable hepatic injury, and NBCA could be one of the effective hemostatic agents for this purpose, in cases of trauma-induced coagulopathy.

Molecular dynamics simulations for the examination of mechanical properties of hydroxyapatite/ poly α-n-butyl cyanoacrylate under additive manufacturing.

PubMed

Wang, Yanen; Wei, Qinghua; Pan, Feilong; Yang, Mingming; Wei, Shengmin

2014-01-01

Molecular dynamics (MD) simulations emerged to be a helpful tool in the field of material science. In rapid prototyping artificial bone scaffolds process, the binder spraying volume and mechanism are very important for bone scaffolds mechanical properties. In this study, we applied MD simulations to investigating the binding energy of α-n-butyl cyanoacrylate (NBCA) on Hydroxyapatite (HA) crystallographic planes (001, 100 and 110), and to calculating and analyzing the mechanical properties and radial distribution function of the HA(110)/NBCA mixed system. The simulation results suggested that HA (110) has the highest binding energy with NBCA owing to the high planar atom density, and the mechanical properties of HA(110)/NBCA mixed system is stronger than pure HA system. Therefore, the multi-grade strength bone scaffold could be fabricated through spraying various volume NBCA binders during 3D printing process. By calculating the radial distribution function of HA(110)/NBCA, the essence of the interface interaction were successfully elucidated. The forming situation parameters can be referred to calculation results. There exists a strong interaction between HA crystallographic plane (110) and NBCA, it is mainly derived from the hydrogen bonds between O atoms which connect with C atoms of NBCA and H atoms in HA crystal. Furthermore, a strong adsorption effect can be demonstrated between HA and NBCA.

Internal Maxillary Artery Preoperative Embolization Using n-Butyl Cyanoacrylate and Pushable Coils for Temporomandibular Joint Ankylosis Surgery.

PubMed

Alderazi, Yazan J; Shastri, Darshan; Wessel, John; Mathew, Melvin; Kass-Hout, Tareq; Aziz, Shahid R; Prestigiacomo, Charles J; Gandhi, Chirag D

2017-05-01

Temporomandibular joint (TMJ) ankylosis causes disability through impaired digestion, mastication, speech, and appearance. Surgical treatment increases range of motion with resultant functional improvement. However, substantial perioperative blood loss can occur (up to 3 L) if the internal maxillary artery (IMAX) is injured as it traverses the ankylotic mass. Achieving hemostasis is difficult because of limited proximal IMAX access and poor visualization. Our aim is to investigate the technical feasibility and preliminary safety of preoperative IMAX embolization in patients undergoing TMJ ankylosis surgery. Case series using chart reviews of 2 patients who underwent preoperative embolization before TMJ ankylosis surgery. Both patients were women (28 and 51 years old) who had severely restricted mouth opening. Embolization was performed using general anesthesia with nasal intubation on the same day of TMJ surgery. Both patients underwent bilateral IMAX embolization using pushable coils (Vortex, Boston Scientific) of distal IMAX followed by n-butyl-cyanoacrylate (Trufill, Cordis) embolization from coil mass up to proximal IMAX. There were no complications from the embolization procedures. Both patients had normal neurologic examination results. TMJ surgery occurred with minimal operative blood loss (≤300 mL for each surgery). Maximum postoperative mouth opening was 35 mm and 34 mm, respectively. One patient had a postoperative TMJ wound infection that was managed with antibiotics. Preoperative IMAX embolization before TMJ ankylosis surgery is technically feasible with encouraging preliminary safety. There were no complications from the embolization procedures and surgeries occurred with low volumes of blood loss. Copyright © 2017 Elsevier Inc. All rights reserved.

Embolization of a High-Output Postnephrectomy Aortocaval Fistula with Gianturco Coils and Cyanoacrylate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cekirge, Saruhan; Oguzkurt, Levent; Saatci, Isil

1996-11-15

The authors describe the endovascular treatment of a high-output, large-caliber, postnephrectomy aortocaval fistula using a mixture of cyanoacrylate and lipiodol combined with Gianturco coil embolization. Thirty-nine coils were used to decrease the flow through the fistula so that a fast-polymerizing glue mixture could be injected into the fistula. During rapid polymerization, the N-butyl-2-cyanoacrylate (NBCA) mixture was trapped within the coils, providing an easily controllable glue cast in the fistula, thereby preventing inadvertent embolization into the lungs. This approach can be of considerable benefit for the endovascular treatment of central high-output fistulas.

Venous vascular malformations of the craniofacial region: pre-operative embolisation with direct percutaneous puncture and N-butyl cyanoacrylate.

PubMed

Cil, B E; Vargel, I; Geyik, S; Peynircioglu, B; Cavusoglu, T

2008-12-01

Craniofacial venous vascular malformations cause severe cosmetic problems and yet these lesions are not candidates for transcatheter embolisation owing to the lack of arterial feeders. The purpose of this study was to evaluate the effectiveness of pre-operative embolisation of these lesions with N-butyl 2-cyanoacrylate (NBCA) via direct puncture. Between September 2003 and April 2006, 13 patients (7 female; age range, 6-64 years; mean, 16.7 years) were embolised with direct puncture and injection of NBCA. All of the patients were referred from plastic surgery with an operational plan. Angiography performed in all patients showed no or little arterial staining. NBCA diluted with iodized oil at a ratio of 1:6 (18%) was injected via a percutaneously placed 21 gauge needle. Complete embolisation was achieved in 8 patients and partial embolisation in the remaining 5. A total of 18 sessions of embolisation were performed on 13 patients. Nine patients underwent only one embolisation session, three patients underwent two sessions and only one patient underwent three sessions. The mean volume of NBCA used per session was 5.8 ml, ranging from 1-12 ml. All patients underwent a successful surgical resection to improve cosmetic disfigurement within 10-15 days after the embolisation procedure. Mean follow-up time was 22 months. One patient experienced skin necrosis on her nose after embolisation. No other complications related to the procedure were observed. In conclusion, pre-operative NBCA embolisation with direct puncture is a safe and easy procedure. It can increase the success of the surgical treatment of these lesions.

Rescue N-butyl-2 cyanoacrylate embolectomy using a Solitaire FR device after venous glue migration during arteriovenous malformation embolization: technical note.

PubMed

Fahed, Robert; Clarençon, Frédéric; Sourour, Nader-Antoine; Chauvet, Dorian; Le Jean, Lise; Chiras, Jacques; Di Maria, Federico

2016-07-01

One of the procedural risks in arteriovenous malformation (AVM) embolization is possible migration of the embolic agent into the venous drainage with an incomplete nidus occlusion, which may lead to severe hemorrhagic complications. This report presents the case of a 29-year-old man who presented with a deep intraparenchymal hematoma on the left side secondary to the spontaneous rupture of a claustral AVM. Upon resorption of the hematoma, the patient underwent an initial therapeutic session of N-butyl-2 cyanoacrylate endovascular embolization, with the purpose of reducing the AVM volume and flow before performing Gamma Knife radiosurgery. After glue injection into one of the arterial feeders, the control angiography showed a partial migration of the glue cast into the straight sinus, with most of the nidus still visible. Because of the bleeding risk due to possible venous hypertension, it was decided to try to retrieve the glue from the vein by using a stent retriever via jugular access. This maneuver allowed a nearly complete removal of the glue cast, thereby restoring normal venous flow drainage. The patient showed no clinical worsening after the procedure. To the authors' knowledge, this is the first report of the use of the Solitaire FR device as a rescue glue retriever. This method should be considered by physicians in cases of unintended glue migration into the venous circulation during AVM embolization.

Ischemic Effects of Transcatheter Arterial Embolization with N-Butyl Cyanoacrylate-Lipiodol on the Colon in a Swine Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ikoma, Akira; Kawai, Nobuyuki; Sato, Morio, E-mail: morisato@wakayama-med.ac.jp

2010-10-15

This study was designed to assess the safety of transcatheter arterial embolization (TAE) with n-butyl cyanoacrylate-lipiodol (NBCA-Lp) for the large bowel and to investigate the vital response to NBCA-Lp in a swine model. In nine swine, nine arteries nourishing the colon were embolized with NBCA-Lp (1 ml of NBCA mixed with 4 ml of lipiodol): sigmoid-rectal branch artery in six swine, right colic branch artery in two, and middle colic branch artery in one. The amount of NBCA-Lp was 0.1-0.4 ml. Sacrifice was conducted 3 days after TAE to identify histological infarction. Classification was conducted retrospectively: group A, vasa rectamore » without NBCA-Lp embolization despite TAE; group B, three or fewer vasa recta with NBCA-Lp embolization; and group C, five or more vasa recta with NBCA-Lp embolization. In one swine in group A, no necrotic focus was observed. In group B, three of four swine experienced no ischemic damage. The remaining one swine experienced necrosis of mucosal and submucosal layers in one-fourth of the circumference. In group C, all four swine with marginal artery and five vasa recta or more embolized experienced total necrosis of mucosa, submucosa, and smooth muscle layers of the whole colonic circumference. Significant difference on the extent of ischemic damage was observed between groups B and C (P < 0.05). Microscopically, NBCA-Lp induced acute vasculitis. Embolization of three or fewer vasa recta with NBCA-Lp induced no ischemic damage or limited necrosis, whereas embolization of five or more vasa recta with NBCA-Lp induced extensive necrosis.« less

Safe and successful endoscopic initial treatment and long-term eradication of gastric varices by endoscopic ultrasound-guided Histoacryl (N-butyl-2-cyanoacrylate) injection.

PubMed

Gubler, Christoph; Bauerfeind, Peter

2014-09-01

Optimal endoscopic treatment of gastric varices is still not standardized nowadays. Actively bleeding varices may prohibit a successful endoscopic injection therapy of Histoacryl® (N-butyl-2-cyanoacrylate). Since 2006, we have treated gastric varices by standardized endoscopic ultrasound (EUS) guided Histoacryl injection therapy without severe adverse events. We present a large single-center cohort over 7 years with a standardized EUS-guided sclerotherapy of all patients with gastric varices. Application was controlled by fluoroscopy to immediately detect any glue embolization. Only perforating veins located within the gastric wall were treated. In the follow up, we repeated this treatment until varices were eradicated. Utmost patients (36 of 40) were treated during or within 24 h of active bleeding. About 32.5% of patients were treated while visible bleeding. Histoacryl injection was always technically successful and only two patients suffered a minor complication. Acute bleeding was stopped in all patients. About 15% (6 of 40) of patients needed an alternative rescue treatment in the longer course. Three patients got a transjugular portosystemic shunt and another three underwent an orthotopic liver transplantation. Mean long-term survival of 60 months was excellent. Active bleeding of gastric varices can be treated successfully without the necessity of gastric rinsing with EUS-guided injection of Histoacryl.

Non-variceal upper gastrointestinal bleeding: Rescue treatment with a modified cyanoacrylate.

PubMed

Grassia, Roberto; Capone, Pietro; Iiritano, Elena; Vjero, Katerina; Cereatti, Fabrizio; Martinotti, Mario; Rozzi, Gabriele; Buffoli, Federico

2016-12-28

To evaluate the safety and efficacy of a modified cyanoacrylate [N-butyl-2-cyanoacrylate associated with methacryloxysulfolane (NBCA + MS)] to treat non-variceal upper gastrointestinal bleeding (NV-UGIB). In our retrospective study we took into account 579 out of 1177 patients receiving endoscopic treatment for NV-UGIB admitted to our institution from 2008 to 2015; the remaining 598 patients were treated with other treatments. Initial hemostasis was not achieved in 45 of 579 patients; early rebleeding occurred in 12 of 579 patients. Thirty-three patients were treated with modified cyanoacrylate: 27 patients had duodenal, gastric or anastomotic ulcers, 3 had post-mucosectomy bleeding, 2 had Dieulafoy's lesions, and 1 had duodenal diverticular bleeding. Of the 45 patients treated endoscopically without initial hemostasis or with early rebleeding, 33 (76.7%) were treated with modified cyanoacrylate glue, 16 (37.2%) underwent surgery, and 3 (7.0%) were treated with selective transarterial embolization. The mean age of patients treated with NBCA + MS (23 males and 10 females) was 74.5 years. Modified cyanoacrylate was used in 24 patients during the first endoscopy and in 9 patients experiencing rebleeding. Overall, hemostasis was achieved in 26 of 33 patients (78.8%): 19 out of 24 (79.2%) during the first endoscopy and in 7 out of 9 (77.8%) among early rebleeders. Two patients (22.2%) not responding to cyanoacrylate treatment were treated with surgery or transarterial embolization. One patient had early rebleeding after treatment with cyanoacrylate. No late rebleeding during the follow-up or complications related to the glue injection were recorded. Modified cyanoacrylate solved definitively NV-UGIB after failure of conventional treatment. Some reported life-threatening adverse events with other formulations, advise to use it as last option.

Transcatheter Arterial Embolization for Primary Postpartum Hemorrhage: Predictive Factors of Need for Embolic Material Conversion of Gelatin Sponge Particles to N-Butyl Cyanoacrylate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanahashi, Yukichi; Goshima, Satoshi, E-mail: gossy@par.odn.ne.jp; Kondo, Hiroshi

PurposeTo identify predictive factors for embolic material conversion to N-butyl cyanoacrylate (NBCA) for the treatment of primary postpartum hemorrhage (PPH) after failed transcatheter arterial embolization (TAE) using gelatin sponge (GS).Materials and MethodsInstitutional review board approval was obtained. We retrospectively studied 62 consecutive women with primary PPH who underwent TAE between January 2006 and March 2015. Five of them were excluded for the following: cardiopulmonary arrest at arrival (n = 1), uterine inversion (n = 1), and hysterectomy after TAE (n = 3). Remaining 57 women (age range, 21–43 years; mean, 32.6 years) comprised study population. TAE was initially performed using GS in all cases andmore » then converted to NBCA after two embolizations using GS with persistent hemodynamic instability or vaginal bleeding. The patients’ background, uterine height, vital signs, laboratory tests, disseminated intravascular coagulation score, and details of procedure were reviewed. Univariate and multivariate analyses were performed to determine factors related to embolic material conversion.ResultsTechnical success rate was 100%. Fourteen patients (25%) needed embolic material conversion to NBCA. Univariate analysis showed that uterine height, systolic blood pressure (sBP), and hemoglobin level were significantly related to embolic material conversion to NBCA (P = 0.029, 0.030, and 0.042). Logistic regression analysis showed that uterine height (odds ratio, 1.37; P = 0.025) and sBP (odds ratio, 0.96; P = 0.003) were associated with embolic material conversion to NBCA.ConclusionUterine height and sBP can be predictive factors for embolic material conversion to NBCA for the treatment of PPH.Level of EvidenceLevel 4, Case Control Study.« less

General Characteristics and Cytotoxic Effects of Nano-Poly (Butyl Cyanoacrylate) Containing Carboplatin on Ovarian Cancer Cells

PubMed Central

Kanaani, Leila; Far, Meysam Ebrahimi; Kazemi, S Maryam; Choupani, Edris; Tabrizi, Maral Mazloumi; Shahmabadi, Hasan Ebrahimi; Khiyavi, Azim Akbarzadeh

2017-01-01

The initial response to treatment and subsequent development of resistance to carboplatin are very important challenges. Use of nano drug delivery is a new method to replace standard chemotherapy. In this research, both non-PEGylated and PEGylated nanoparticles (NPs) were prepared by mini-emulsion polymerization of poly (butyl cyanoacrylate) (PBCA) NPs. Characteristics such as size, polydispersity index (PDI), zeta potential, drug release, and stability were examined. In addition, infrared spectroscopy was used for description of the produced NPs. Then, cytotoxicity effects of both formulations were studied on the A2780CIS ovarian cancer cell line with incubation for 24, 48, and 72h. Examination of characteristics of loaded carboplatin on the PBCA NPs under suitable laboratory conditions showed a positive effect of PEG on their properties. Cytotoxicity studies demonstrated greater toxicity with both formulations of nano-drugs than the free drug. The results indicated that PBCA NPs can be considered as suitable candidates for nano-drugs in chemotherapy. PMID:28240014

A prospective, multicenter, randomized trial of the Onyx liquid embolic system and N-butyl cyanoacrylate embolization of cerebral arteriovenous malformations. Clinical article.

PubMed

Loh, Yince; Duckwiler, Gary R

2010-10-01

The Onyx liquid embolic system (Onyx) was approved in the European Union in 1999 for embolization of lesions in the intracranial and peripheral vasculature, including brain arteriovenous malformations (AVMs) and hypervascular tumors. In 2001 a prospective, equivalence, multicenter, randomized controlled trial was initiated to support a submission for FDA approval. The objective of this study was to verify the safety and efficacy of Onyx compared with N-butyl cyanoacrylate (NBCA) for the presurgical treatment of brain AVMs. One hundred seventeen patients with brain AVMs were treated with either Onyx (54 patients) or NBCA (63 patients) for presurgical endovascular embolization between May 2001 and April 2003. The primary end point was technical success in achieving ≥ 50% reduction in AVM volume. Secondary end points were operative blood loss and resection time. All adverse events (AEs) were reported and assigned a relationship to the Onyx or NBCA system, treatment, disease, surgery, or other/unknown. The Data Safety Monitoring Board adjudicated AEs, and a blinded, independent core lab assessed volume measurements. Patients were monitored through discharge after the final surgery or through a 3- and/or 12-month follow-up if resection had not been performed or was incomplete. The use of Onyx led to ≥ 50% AVM volume reduction in 96% of cases versus 85% for NBCA (p = not significant). The secondary end points of resection time and blood loss were similar. Serious AEs were also similar between the 2 treatment groups. Onyx is equivalent to NBCA in safety and efficacy as a preoperative embolic agent in reducing brain AVM volume by at least 50%.

Portal Vein Embolization Utilizing N-Butyl Cyanoacrylate for Contralateral Lobe Hypertrophy Prior to Liver Resection: A Systematic Review and Meta-Analysis.

PubMed

Wajswol, Ethan; Jazmati, Tarek; Contractor, Sohail; Kumar, Abhishek

2018-04-23

To evaluate the safety and effectiveness of n-butyl cyanoacrylate (NBCA) for portal vein embolization (PVE) when used to induce contralateral future liver remnant (FLR) hypertrophy in patients undergoing planned hepatic resection for hepatic malignancy. The PubMed database (including articles indexed by MEDLINE) was searched for articles published from 1970 to 2018 describing patients treated with PVE utilizing NBCA to induce hypertrophy of the FLR prior to contralateral hepatic lobe resection. Demographic data, embolization technique, complications of embolization, resultant FLR hypertrophy, and surgical outcomes were obtained when available. A meta-analysis was performed to determine the cumulative relative hypertrophy rate of the FLR following PVE with NBCA. The literature search yielded 18 relevant articles. Six hundred and seven patients (383 men, 220 women; mean age 60.7 years) with procedures describing PVE utilizing NBCA were reviewed. The most common underlying hepatic malignancies were colorectal metastases (n = 348), followed by cholangiocarcinomas (n = 92), and hepatocellular carcinomas (n = 89). Technical success was reportedly achieved in 603/607 patients, for a success rate of 99.3%. Fixed effects meta-analysis of the relative hypertrophy rate of the FLR among studies resulted in an aggregate rate of 49.4 ± 1.3%. Of the patients who underwent attempted PVE, 461/607 (75.9%) eventually underwent surgical resection. Major complications following PVE occurred in 19 patients (3.13%), while minor complications following PVE occurred in 38 patients (6.26%). PVE utilizing NBCA to induce hypertrophy of the FLR prior to contralateral lobe resection in the setting of hepatic malignancy is safe and effective. Level IIa-Systematic review of cohort studies.

Intraosseous embolotherapy of central arteriovenous malformations in the jaw: long-term experience with 8 cases.

PubMed

Liu, Denggao; Ma, Xuchen; Zhao, Fuyun; Zhang, Jianguo

2009-11-01

To investigate the long-term effects of direct intraosseous histoacryl embolotherapy on central arteriovenous malformations (AVMs) of the jaw. Eight patients with central AVMs of the jaw (3 in the maxilla and 5 in the mandible) were treated with direct intraosseous histoacryl injection. These AVMs exhibited cystic radiolucency, with (n = 5) or without (n = 3) honeycombed component. On angiography, all the AVMs exhibited a large intraosseous nidus with multiple suppliers and drainages. The intraosseous lesions were percutaneously punctured with an 18- to 20-gauge needle, and NBCA diluted 30% to 40% with iodized oil was injected during venous compression. Postembolic arteriograms showed that all the AVMs were completely or nearly completely devascularized after single or multiple injections at the initial treatment. The follow-up period ranged from 3 to 8 years. Two AVMs experienced postembolic curettage and were anatomically cured. Three AVMs were anatomically cured after 1 to 3 sessions of embolotherapy. The other 3 AVMs were clinically cured after 1 (n = 2) to 4 (n = 1) sessions of embolotherapy. There were no procedure-related severe complications. Direct intraosseous glue embolotherapy can be a simple and safe technique for endovascular management of central AVMs in the jaw and is particularly effective in an emergency. Complete reossification of the intraosseous nidus can be anticipated if a complete occlusion is obtained.

Harvesting keratolimbal allografts from corneoscleral buttons: a novel application of cyanoacrylate adhesive.

PubMed

Lim, L T; Bhatt, P R; Ramaesh, K

2008-11-01

To describe an alternative and novel technique using cyanoacrylate glue to achieve successful limbal tissue dissection, from an organ culture media stored corneoscleral button, without an artificial anterior chamber. A donor corneoscleral button (leftover from penetrating keratoplasty) was divided into two equal semicircular halves. A thick layer of tissue adhesive (N-butyl-2-cyanoacrylate) was spread on a sterile rubber block (the under surface of the donor punch). One half of the donor corneoscleral rim was placed epithelial side up on the adhesive and allowed to attach firmly to the block. This composite provided stability to the donor rim allowing lamellar dissection of the limbal tissue to be performed without damaging the limbal epithelium. Regular, partial-thickness limbal tissue was obtained. There was no histological evidence of glue or cellular toxicity of the harvested limbal stem cells. This harvested tissue had been grafted successfully in patients with limbal stem cell deficiency also undergoing keratoplasty. Tissue adhesive can be a simple, effective and useful tool in the dissection and harvesting of corneal limbal stem cell allografts from corneoscleral buttons stored in organ culture media.

Brain targeting of nerve growth factor using poly(butyl cyanoacrylate) nanoparticles.

PubMed

Kurakhmaeva, Kamila B; Djindjikhashvili, Irma A; Petrov, Valery E; Balabanyan, Vadim U; Voronina, Tatiana A; Trofimov, Sergey S; Kreuter, Jörg; Gelperina, Svetlana; Begley, David; Alyautdin, Renad N

2009-09-01

The nerve growth factor (NGF) is essential for the survival of both peripheral ganglion cells and central cholinergic neurons in the basal forebrain. The accelerated loss of central cholinergic neurons during Alzheimer's disease may be a determinant cause of dementia, and this observation may suggest a possible therapeutic benefit from treatment with NGF. In recent years, convincing data have been published involving neurotrophic factors for the modulation of dopaminergic transmission within the brain and concerning the ability of NGF to prevent the degeneration of dopaminergic neurons. In this connection, the administration of NGF may slow down the progression of Parkinson's disease. However, NGF, as well as other peptidic neurotrophic factors, does not significantly penetrate the blood-brain barrier (BBB) from the circulation. Therefore, any clinical usefulness of NGF as a potential CNS therapy will depend on the use of a suitable carrier system that enhances its transport through the BBB. The present study investigates brain delivery of NGF adsorbed on poly(butyl cyanoacrylate) (PBCA) nanoparticles coated with polysorbate 80 and the pharmacological efficacy of this delivery system in the model of acute scopolamine-induced amnesia in rats as well as in the model of 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced Parkinsonian syndrome. As shown by the passive avoidance reflex (PAR) test, the intravenous administration of the nanoparticle-bound NGF successfully reversed scopolamine-induced amnesia and improved recognition and memory. This formulation also demonstrated a significant reduction of the basic symptoms of Parkinsonism (oligokinesia, rigidity, tremor). In addition, the efficient transport of NGF across the BBB was confirmed by direct measurement of NGF concentrations in the murine brain. These results demonstrate that the PBCA nanoparticles coated with polysorbate 80 are an effective carrier system for the transport of NGF to the central

Comparison of hemostatic durability between N-butyl cyanoacrylate and gelatin sponge particles in transcatheter arterial embolization for acute arterial hemorrhage in a coagulopathic condition in a swine model.

PubMed

Yonemitsu, Takafumi; Kawai, Nobuyuki; Sato, Morio; Sonomura, Tetsuo; Takasaka, Isao; Nakai, Motoki; Minamiguchi, Hiroki; Sahara, Shinya; Iwasaki, Yasuhiro; Naka, Toshio; Shinozaki, Masahiro

2010-12-01

This study was designed to compare the efficacy of transcatheter arterial embolization (TAE) with N-butyl cyanoacrylate (NBCA) or gelatin sponge particles (GSP) for acute arterial bleeding in a coagulopathic condition using a swine model. Four healthy swine were divided into two coagulopathic conditions: mild and severe. Five hemorrhages were created in each swine (10 hemorrhages per coagulopathy). Mild coagulopathy was achieved by bloodletting 10% of the total circulatory whole blood and preserving activated clotting time (ACT) less than 200 s (ACT < 200 s state); severe coagulopathy was achieved by bloodletting 30% and preserving ACT > 400 s (ACT > 400-second state). For each state, of ACT < 200 s or ACT > 400 s, TAE was conducted with GSP or NBCA to control five hemorrhages arising from artificially created renal and splenic injuries. Angiography immediately after TAE with GSP or NBCA showed complete occlusion in both coagulopathic conditions. In the ACT < 200-second state, follow-up angiography at 5-30 min after TAE with GSP or NBCA showed no evidence of recurrent hemorrhage. In the ACT > 400-second state, follow-up angiography showed recurrent hemorrhage in four (80%) of the five hemorrhages embolized with GSP and in one (20%) of the five hemorrhages embolized with NBCA. Microscopically, red thrombi were observed densely surrounding GSP in mild coagulopathy but were scarce in severe coagulopathy. In a condition with severe coagulopathy, TAE with NBCA was more effective in durability to cease active arterial bleeding than with GSP.

Comparison of Hemostatic Durability between N-Butyl Cyanoacrylate and Gelatin Sponge Particles in Transcatheter Arterial Embolization for Acute Arterial Hemorrhage in a Coagulopathic Condition in a Swine Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yonemitsu, Takafumi; Kawai, Nobuyuki; Sato, Morio, E-mail: morisato@mail.wakayama-med.ac.jp

2010-12-15

This study was designed to compare the efficacy of transcatheter arterial embolization (TAE) with N-butyl cyanoacrylate (NBCA) or gelatin sponge particles (GSP) for acute arterial bleeding in a coagulopathic condition using a swine model. Four healthy swine were divided into two coagulopathic conditions: mild and severe. Five hemorrhages were created in each swine (10 hemorrhages per coagulopathy). Mild coagulopathy was achieved by bloodletting 10% of the total circulatory whole blood and preserving activated clotting time (ACT) less than 200 s (ACT < 200 s state); severe coagulopathy was achieved by bloodletting 30% and preserving ACT > 400 s (ACT >more » 400-second state). For each state, of ACT < 200 s or ACT > 400 s, TAE was conducted with GSP or NBCA to control five hemorrhages arising from artificially created renal and splenic injuries. Angiography immediately after TAE with GSP or NBCA showed complete occlusion in both coagulopathic conditions. In the ACT < 200-second state, follow-up angiography at 5-30 min after TAE with GSP or NBCA showed no evidence of recurrent hemorrhage. In the ACT > 400-second state, follow-up angiography showed recurrent hemorrhage in four (80%) of the five hemorrhages embolized with GSP and in one (20%) of the five hemorrhages embolized with NBCA. Microscopically, red thrombi were observed densely surrounding GSP in mild coagulopathy but were scarce in severe coagulopathy. In a condition with severe coagulopathy, TAE with NBCA was more effective in durability to cease active arterial bleeding than with GSP.« less

40 CFR 721.4925 - Methyl n-butyl ketone.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Methyl n-butyl ketone. 721.4925... Substances § 721.4925 Methyl n-butyl ketone. (a) Chemical substance and significant new use subject to reporting. (1) The chemical substance methyl n-butyl ketone, CAS Number 591-78-6, is subject to reporting...

40 CFR 721.4925 - Methyl n-butyl ketone.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Methyl n-butyl ketone. 721.4925... Substances § 721.4925 Methyl n-butyl ketone. (a) Chemical substance and significant new use subject to reporting. (1) The chemical substance methyl n-butyl ketone, CAS Number 591-78-6, is subject to reporting...

21 CFR 520.260 - n-Butyl chloride capsules.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false n-Butyl chloride capsules. 520.260 Section 520.260... DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.260 n-Butyl chloride capsules. (a)(1) Specifications. n-Butyl chloride capsules, veterinary contain 272 milligrams or 816 milligrams...

27 CFR 21.100 - n-Butyl alcohol.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false n-Butyl alcohol. 21.100 Section 21.100 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT....100 n-Butyl alcohol. (a) Acidity (as acetic acid). 0.03 percent by weight maximum. (b) Color...

27 CFR 21.100 - n-Butyl alcohol.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false n-Butyl alcohol. 21.100 Section 21.100 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT....100 n-Butyl alcohol. (a) Acidity (as acetic acid). 0.03 percent by weight maximum. (b) Color...

21 CFR 520.260 - n-Butyl chloride.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 6 2014-04-01 2014-04-01 false n-Butyl chloride. 520.260 Section 520.260 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.260 n-Butyl chloride. (a)(1...

21 CFR 520.260 - n-Butyl chloride.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 6 2013-04-01 2013-04-01 false n-Butyl chloride. 520.260 Section 520.260 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.260 n-Butyl chloride. (a)(1...

Percutaneous Direct Needle Puncture and Transcatheter N-butyl Cyanoacrylate Injection Techniques for the Embolization of Pseudoaneurysms and Aneurysms of Arteries Supplying the Hepato-pancreato-biliary System and Gastrointestinal Tract

PubMed Central

Yadav, Rajanikant R; Boruah, Deb K; Bhattacharyya, Vishwaroop; Prasad, Raghunandan; Kumar, Sheo; Saraswat, V A; Kapoor, V K; Saxena, Rajan

2016-01-01

Aims: The aim of this study was to evaluate the safety and clinical efficacy of percutaneous direct needle puncture and transcatheter N-butyl cyanoacrylate (NBCA) injection techniques for the embolization of pseudoaneurysms and aneurysms of arteries supplying the hepato-pancreato-biliary (HPB) system and gastrointestinal (GI) tract. Subjects and Methods: A hospital-based cross-sectional retrospective study was conducted, where the study group comprised 11 patients with pseudoaneurysms/aneurysms of arteries supplying the HPB system and GI tract presenting to a tertiary care center from January 2015 to June 2016. Four patients (36.4%) underwent percutaneous direct needle puncture of pseudoaneurysms with NBCA injection, 3 patients (27.3%) underwent transcatheter embolization with NBCA as sole embolic agent, and in 4 patients (36.4%), transcatheter NBCA injection was done along with coil embolization. Results: This retrospective study comprised 11 patients (8 males and 3 females) with mean age of 35.8 years ± 1.6 (standard deviation [SD]). The mean volume of NBCA: ethiodized oil (lipiodol) mixture injected by percutaneous direct needle puncture was 0.62 ml ± 0.25 (SD) (range = 0.5–1 ml), and by transcatheter injection, it was 0.62 ml ± 0.37 (SD) (range = 0.3–1.4 ml). Embolization with NBCA was technically and clinically successful in all patients (100%). No recurrence of bleeding or recurrence of pseudoaneurysm/aneurysm was noted in our study. Conclusions: Percutaneous direct needle puncture of visceral artery pseudoaneurysms and NBCA glue injection and transcatheter NBCA injection for embolization of visceral artery pseudoaneurysms and aneurysms are cost-effective techniques that can be used when coil embolization is not feasible or has failed. PMID:28123838

40 CFR 721.10193 - 1-Butanaminium, N-(3-aminopropyl)-N-butyl-N-(2-carboxyethyl)-, N-coco acyl derivs., inner salts.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-butyl-N-(2-carboxyethyl)-, N-coco acyl derivs., inner salts. 721.10193 Section 721.10193 Protection of...-aminopropyl)-N-butyl-N-(2-carboxyethyl)-, N-coco acyl derivs., inner salts. (a) Chemical substance and...-aminopropyl)-N-butyl-N-(2-carboxyethyl)-, N-coco acyl derivs., inner salts (PMN P-06-263, Chemical B; CAS No...

Embolotherapy for Neuroendocrine Tumor Liver Metastases: Prognostic Factors for Hepatic Progression-Free Survival and Overall Survival

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, James X.; Rose, Steven; White, Sarah B.

PurposeThe purpose of the study was to evaluate prognostic factors for survival outcomes following embolotherapy for neuroendocrine tumor (NET) liver metastases.Materials and MethodsThis was a multicenter retrospective study of 155 patients (60 years mean age, 57 % male) with NET liver metastases from pancreas (n = 71), gut (n = 68), lung (n = 8), or other/unknown (n = 8) primary sites treated with conventional transarterial chemoembolization (TACE, n = 50), transarterial radioembolization (TARE, n = 64), or transarterial embolization (TAE, n = 41) between 2004 and 2015. Patient-, tumor-, and treatment-related factors were evaluated for prognostic effect on hepatic progression-free survival (HPFS) and overall survival (OS) using unadjusted and propensity score-weighted univariate and multivariate Coxmore » proportional hazards models.ResultsMedian HPFS and OS were 18.5 and 125.1 months for G1 (n = 75), 12.2 and 33.9 months for G2 (n = 60), and 4.9 and 9.3 months for G3 tumors (n = 20), respectively (p < 0.05). Tumor burden >50 % hepatic volume demonstrated 5.5- and 26.8-month shorter median HPFS and OS, respectively, versus burden ≤50 % (p < 0.05). There were no significant differences in HPFS or OS between gut or pancreas primaries. In multivariate HPFS analysis, there were no significant differences among embolotherapy modalities. In multivariate OS analysis, TARE had a higher hazard ratio than TACE (unadjusted Cox model: HR 2.1, p = 0.02; propensity score adjusted model: HR 1.8, p = 0.11), while TAE did not differ significantly from TACE.ConclusionHigher tumor grade and tumor burden prognosticated shorter HPFS and OS. TARE had a higher hazard ratio for OS than TACE. There were no significant differences in HPFS among embolotherapy modalities.« less

27 CFR 21.118 - Methyl n-butyl ketone.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Methyl n-butyl ketone. 21.118 Section 21.118 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU....118 Methyl n-butyl ketone. (a) Acidity (as acetic acid). 0.02 percent by weight, maximum. (b) Color...

27 CFR 21.118 - Methyl n-butyl ketone.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Methyl n-butyl ketone. 21.118 Section 21.118 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU....118 Methyl n-butyl ketone. (a) Acidity (as acetic acid). 0.02 percent by weight, maximum. (b) Color...

21 CFR 520.260 - n-Butyl chloride capsules.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 6 2011-04-01 2011-04-01 false n-Butyl chloride capsules. 520.260 Section 520.260 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.260 n-Butyl chloride capsules...

(5-n-Butyl-10,20-diiso­butyl­porphyrin­ato)nickel(II)

PubMed Central

Senge, Mathias O.; Dahms, Katja

2014-01-01

The asymmetric unit of the title compound, [Ni(C32H36N4)], contains two independent mol­ecules exhibiting an overall ruffled conformation of the porphyrin macrocycle and differing mainly in the positions of the methyl groups. The average Ni—N bond lengths are 1.912 (2) and 1.910 (2) Å in the two mol­ecules. The mol­ecules form a closely spaced lattice structure in which neighbouring porphyrins are oriented in a nearly perpendicular fashion to each other. The compound was prepared via nucleophilic substitution of (5,15-diiso­butyl­porphyrinato)nickel(II) with n-butyl­lithium. PMID:25161518

Evaluation of one-step luminescent cyanoacrylate fuming.

PubMed

Khuu, Alicia; Chadwick, Scott; Spindler, Xanthe; Lam, Rolanda; Moret, Sébastien; Roux, Claude

2016-06-01

One-step luminescent cyanoacrylates have recently been introduced as an alternative to the conventional cyanoacrylate fuming methods. These new techniques do not require the application of a luminescent post-treatment in order to enhance cyanoacrylate-developed fingermarks. In this study, three one-step polymer cyanoacrylates: CN Yellow Crystals (Aneval Inc.), PolyCyano UV (Foster+Freeman Ltd.) and PECA Multiband (BVDA), and one monomer cyanoacrylate: Lumikit™ (Crime Scene Technology), were evaluated against a conventional two-step cyanoacrylate fuming method (Cyanobloom (Foster+Freeman Ltd.) with rhodamine 6G stain). The manufacturers' recommended conditions or conditions compatible with the MVC™ 1000/D (Foster+Freeman Ltd.) were assessed with fingermarks aged for up to 8 weeks on non-porous and semi-porous substrates. Under white light, Cyanobloom generally gave better development than the one-step treatments across the substrates. Similarly when viewed under the respective luminescent conditions, Cyanobloom with rhodamine 6G stain resulted in improved contrast against the one-step treatments except on polystyrene, where PolyCyano UV and PECA Multiband gave better visualisation. Rhodamine 6G post-treatment of one-step samples did not significantly enhance the contrast of any of the one-step treatments against Cyanobloom/rhodamine 6G-treated samples. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

The detection of drugs of abuse in fingerprints using Raman spectroscopy II: cyanoacrylate-fumed fingerprints

NASA Astrophysics Data System (ADS)

Day, Joanna S.; Edwards, Howell G. M.; Dobrowski, Steven A.; Voice, Alison M.

2004-07-01

This paper describes the application of Raman spectroscopy to the detection of exogenous substances in cyanoacrylate-fumed fingerprints. The scenario considered was that of an individual handling a substance and subsequently depositing a contaminated fingerprint. These fingerprints were enhanced by cyanoacrylate fuming, a process in which a layer of white cyanoacrylate polymer is deposited on the fingerprint material, enabling visual detection. Five drugs of abuse (codeine phosphate, cocaine hydrochloride, amphetamine sulphate, barbital and nitrazepam) and five non-controlled substances of similar appearance, which may be used in the adulteration of drugs of abuse (caffeine, aspirin, paracetamol, starch and talc), were used. The substances studied could be clearly distinguished using their Raman spectra and were all successfully detected in cyanoacrylate-fumed fingerprints. Photobleaching was necessary to reduce the fluorescence background in the spectra of some substances. Raman spectra obtained from the substances in cyanoacrylate-fumed fingerprints were of a similar quality to spectra obtained from the substances under normal sampling conditions, however, interfering Raman bands arising from the cyanoacrylate polymer were present in the spectra. In most cases the only interfering band was the CN stretching mode of the polymer, and there were no cases where the interfering bands prevented identification of the substances. If necessary, the interfering bands could be successfully removed by spectral subtraction. The most difficult aspect of the detection of these substances in cyanoacrylate-fumed fingerprints was visually locating the substance in the fingerprint beneath the polymer layer in order to obtain a Raman spectrum.

Use of cyanoacrylate glue for temporary tarsorrhaphy in children.

PubMed

Trivedi, Dipti; McCalla, Maureen; Squires, Zoe; Parulekar, Manoj

2014-01-01

Congenital anophthalmia and postenucleation socket contracture are difficult conditions that require serial socket expansion with the use of hydrogel expanders and custom-made conformers along with temporary tarsorrhaphy. The authors undertook a part prospective case review of all children undergoing temporary tarsorrhaphy using cyanoacrylate glue over a 3-year period at a tertiary specialist children's hospital. They report a series of 7 children undergoing temporary tarsorrhaphy with cyanoacrylate glue instead of the conventional suturing technique. Indications were socket expansion (n = 4), fornix deepening (n = 2), prosthesis reposition, and prolapsed conjunctiva following enucleation (n = 1).The age range was 3 weeks to 14 years (mean, 2.7 years). The glue tarsorrhaphy lasted between 0.5 and 13 weeks (mean, 4.5 weeks). There were no adverse outcomes, and the glue tarsorrhaphy was tolerated well in all cases, with relative ease of reapplication of glue in clinic. Their study demonstrates that this technique allows quick and efficient temporary tarsorrhaphy with relative ease of reapplication in a clinic setting, avoiding the need for multiple general anesthetics.

Final report of the addendum to the safety assessment of n-butyl alcohol as used in cosmetics.

PubMed

McLain, Valerie C

2008-01-01

n-Butyl Alcohol is a primary aliphatic alcohol historically used as a solvent in nail care cosmetic products, but new concentration of use data indicate that it also is being used at low concentrations in eye makeup, personal hygiene, and shaving cosmetic products. n-Butyl Alcohol has been generally recognized as safe for use as a flavoring substance in food and appears on the 1982 Food and Drug Administration (FDA) list of inactive ingredients for approved prescription drug products. n-Butyl Alcohol can be absorbed through the skin, lungs, and gastrointestinal tract. n-Butyl Alcohol may be formed by hydrolysis of butyl acetate in the blood, but is rapidly oxidized. The single oral dose LD(50) of n-Butyl Alcohol for rats was 0.79 to 4.36 g/kg. The dermal LD(50) for rabbits was 4.2 g/kg. Inhalation toxicity studies in humans demonstrate sensory irritation of the upper respiratory tract, but only at levels above 3000 mg/m(3). Animal studies demonstrate intoxication, restlessness, ataxia, prostration, and narcosis. Exposures of rats to levels up to 4000 ppm failed to produce hearing defects. High concentrations of n-Butyl Alcohol vapors can be fatal. Ocular irritation was observed for n-Butyl alcohol at 0.005 ml of a 40% solution. The behavioral no-effect dose for n-Butyl Alcohol injected subcutaneously (s.c.) was 120 mg/kg. Fetotoxicity has been demonstrated, but only at maternally toxic levels (1000 mg/kg). No significant behavioral or neurochemical effects were seen in offspring following either maternal or paternal exposure to 3000 or 6000 ppm. n-Butyl Alcohol was not mutagenic in Ames tests, did not induce sister-chromatid exchange or chromosome breakage in chick embryos or Chinese hamster ovary cells, did not induce micronuclei formation in V79 Chinese hamster cells, did not have any chromosome-damaging effects in a mouse micronucleus test, and did not impair chromosome distribution in the course of mitosis. Clinical testing of n-Butyl Alcohol for

Derivation of a human equivalent concentration for n-butanol using a physiologically based pharmacokinetic model for n-butyl acetate and metabolites n-butanol and n-butyric acid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Teeguarden, Justin G.; Deisinger, P. J.; Poet, Torka S.

2005-05-01

The metabolic series (family) approach for risk assessment uses a dosimetry-based analysis to develop toxicity information for a group of metabolically linked compounds using pharmacokinetic (PK) data for each compound and toxicity data for the parent compound. An initial physiologically-based pharmacokinetic (PBPK) model was developed to support the implementation of the metabolic series approach for n-butyl acetate and its subsequent metabolites, n-butanol, and n-butyric acid (the butyl series) (Barton et al. 2000). In conjunction with pilot pharmacokinetic studies, the model was used to design the definitive intravenous (i.v.) PK studies. Rats were implanted with dual indwelling cannulae and administered testmore » compounds by i.v. bolus dose, i.v. infusion, or by inhalation in a recirculating closed chamber. Hepatic, vascular and extravascular metabolic constants for metabolism were estimated by fitting the model to the blood time course data from these experiments. The respiratory bioavailability of n-butyl acetate and n-butanol was estimated from closed chamber inhalation studies and measured ventilation rates. The resulting butyl series PBPK model successfully reproduces the blood time course of these compounds following i.v. administration, and inhalation exposure to n-butyl acetate and n-butanol. A fully scaled human version of the model successfully reproduces arterial blood n-butanol kinetics following inhalation exposure to n-butanol. These validated i.v (rat) and inhalation route models (rat, butyl acetate, n-butanol; human, butanol only) can be used to support species and dose-route extrapolations required for risk assessment of butyl series family of compounds. Further, this work demonstrates the usefulness of i.v. kinetic data for parameterization of systemic metabolism and the value of collaboration between experimentalists and kineticists in the development of PBPK models. The product of this effort, validated rat and human PBPK models for the

Dynamics of acoustic droplet vaporization in gas embolotherapy

NASA Astrophysics Data System (ADS)

Qamar, Adnan; Wong, Zheng Z.; Fowlkes, J. Brian; Bull, Joseph L.

2010-04-01

Acoustic droplet vaporization is investigated in a theoretical model. This work is motivated by gas embolotherapy, a developmental cancer treatment involving tumor infarction with gas microbubbles that are selectively formed from liquid droplets. The results indicate that there exists a threshold value for initial droplet size below which the bubble evolution is oscillatory and above which it is smooth and asymptotic, and show that the vaporization process affects the subsequent microbubble expansion. Dampening of the bubble expansion is observed for higher viscosity and surface tension, with effects more pronounced for droplet size less than 6 μm in radius.

Therapeutic ureteral occlusion with Ifabond cyanoacrylate glue: an interesting solution.

PubMed

Oderda, Marco; Lacquaniti, Sergio; Fraire, Flavio; Antolini, Jacopo; Camilli, Marco; Mandras, Roberto; Puccetti, Luca; Varvello, Francesco; Fasolis, Giuseppe

2017-08-01

The aim of this study was to present a novel approach for complete and permanent ureteral occlusion using a percutaneous injection of Ifabond cyanoacrylate glue. We describe in detail all the steps of our surgery, performed on a 79-year-old patient with urinary leakage from ureteral stump following radical cystectomy. N-hexyl-cyanoacrylate glue (Ifabond) was used to occlude the distal ureter and solve the leakage. Our approach was successful, sparing our already frail patient further surgical procedures. Six months pyelography confirmed the complete ureteral blockage with absence of extravasation. In complicated scenarios with urinary leakages and frail patients, synthetic glues such as Ifabond might represent an interesting therapeutic option to solve the fistulas, leading to durable success with a minimally invasive approach.

A comparison between atmospheric/humidity and vacuum cyanoacrylate fuming of latent fingermarks.

PubMed

Farrugia, Kevin J; Fraser, Joanna; Friel, Lauren; Adams, Duncan; Attard-Montalto, Nicola; Deacon, Paul

2015-12-01

A number of pseudo-operational trials were set up to compare the atmospheric/humidity and vacuum cyanoacrylate fuming processes on plastic carrier bags. The fuming processes were compared using two-step cyanoacrylate fuming with basic yellow 40 (BY40) staining and a one-step fluorescent cyanoacrylate fuming, Lumicyano 4%. Preliminary work using planted fingermarks and split depletions were performed to identify the optimum vacuum fuming conditions. The first pseudo-operational trial compared the different fuming conditions (atmospheric/humidity vs. vacuum) for the two-step process where an additional 50% more marks were detected with the atmospheric/humidity process. None of the marks by the vacuum process could be observed visually; however, a significant number of marks were detected by fluorescence after BY40 staining. The second trial repeated the same work in trial 1 using the one-step cyanoacrylate process, Lumicyano at a concentration of 4%. Trial 2 provided comparable results to trial 1 and all the items were then re-treated with Lumicyano 4% at atmospheric/humidity conditions before dyeing with BY40 to provide the sequences of process A (Lumicyano 4% atmospheric-Lumicyano 4% atmospheric-BY40) and process B (Lumicyano 4% vacuum-Lumicyano 4% atmospheric-BY40). The number of marks (visual and fluorescent) was counted after each treatment with a substantial increase in the number of detected marks in the second and third treatments of the process. The increased detection rate after the double Lumicyano process was unexpected and may have important implications. Trial 3 was performed to investigate whether the amount of cyanoacrylate and/or fuming time had an impact on the results observed in trial 2 whereas trial 4 assessed if the double process using conventional cyanoacrylate, rather than Lumicyano 4%, provided an increased detection rate. Trials 3 and 4 confirmed that doubling the amount of Lumicyano 4% cyanoacrylate and fuming time produced a lower

A PHYSIOLOGICALLY-BASED PHARMACOKINETIC MODEL FOR INTRAVENOUS AND INHALATION-ROUTE PHARMACOKINETICS OF BUTYL ACETATE AND METABOLITES N-BUTANOL AND N-BUTYRIC ACID

EPA Science Inventory

Risk assessment for n-butyl acetate and metabolites n-butanol and n-butyric acid (the butyl series) can be accomplished with limited toxicity data and pharmacokinetic data for each compound through application of the "family approach" (Barton et al., 2000). The necessary quantita...

Bonding strength of alkyl-2-cyanoacrylates to bone in vitro.

PubMed

Kilpikari, J; Lapinsuo, M; Törmälä, P; Pätiälä, H; Rokkanen, P

1986-10-01

This study measured the bonding strength between alkyl-2-cyanoacrylates and bone, and examined how treatment of the bone surface with acid, and prolonged exposure to moisture, affected this strength. The initial strength of all cyanoacrylates was high (9.6-11.2 N/mm2). In long-term experiments under water, n- and i-butylcyanoacrylates lost their strength at a far slower rate than ethylcyanoacrylates. However, the butylcyanoacrylates also showed a decrease of 15% in strength after three weeks. Pretreatment of the bone surface with acid did not have a marked effect on bonding strength, although SEM investigation revealed that the acid treatment had increased the porosity of the bone surface. A study of the fracture surface proved that the adhesive film tended to loosen or break after 3 to 6 weeks under water. The decrease in the bonding strength was probably due to the degradation of the adhesive film in water which loosened mechanical bonds between the bone and adhesive. Considering clinical use it would be necessary to achieve better long-term strength.

Reactivities of Substituted α-Phenyl-N-tert-butyl Nitrones

PubMed Central

2015-01-01

In this work, a series of α-phenyl-N-tert-butyl nitrones bearing one, two, or three substituents on the tert-butyl group was synthesized. Cyclic voltammetry (CV) was used to investigate their electrochemical properties and showed a more pronounced substituent effect for oxidation than for reduction. Rate constants of superoxide radical (O2•–) reactions with nitrones were determined using a UV–vis stopped-flow method, and phenyl radical (Ph•) trapping rate constants were measured by EPR spectroscopy. The effect of N-tert-butyl substitution on the charge density and electron density localization of the nitronyl carbon as well as on the free energies of nitrone reactivity with O2•– and HO2• were computationally rationalized at the PCM/B3LYP/6-31+G**//B3LYP/6-31G* level of theory. Theoretical and experimental data showed that the rates of the reaction correlate with the nitronyl carbon charge density, suggesting a nucleophilic nature of O2•– and Ph• addition to the nitronyl carbon atom. Finally, the substituent effect was investigated in cell cultures exposed to hydrogen peroxide and a correlation between the cell viability and the oxidation potential of the nitrones was observed. Through a combination of computational methodologies and experimental methods, new insights into the reactivity of free radicals with nitrone derivatives have been proposed. PMID:24968285

Endolymphatic Ethiodized Oil Intranodal Lymphangiography and Cyanoacrylate Glue Embolization for the Treatment of Postoperative Lymphatic Leak After Robot-Assisted Laparoscopic Pelvic Resection.

PubMed

Hill, Hannah; Srinivasa, Ravi N; Gemmete, Joseph J; Hage, Anthony; Bundy, Jacob; Chick, Jeffrey Forris Beecham

2018-01-01

Purpose: To report the approach, technical success, clinical outcomes, complications, and follow-up of ethiodized oil intranodal lymphangiography with cyanoacrylate glue embolization for the treatment of lymphatic leak after robot-assisted laparoscopic pelvic resection. Materials and Methods: Four men with mean age 68.7 ± 14.3 years were treated with ethiodized oil intranodal lymphangiography with cyanoacrylate embolization for postoperative lymphatic leak. Patients underwent either (1) cystoprostatectomy with ileal conduit and bilateral extensive pelvic lymph node dissection for muscle-invasive urothelial carcinoma and presented with postoperative lymphatic ascites ( n  = 2) or (2) prostatectomy with bilateral standard pelvic lymph node dissection for prostate carcinoma and presented with postoperative pelvic lymphoceles ( n  = 2). Intranodal lymphangiography and embolization procedural details, technical success, clinical outcomes, and follow-up were recorded. Results: In four patients, a total of six ethiodized oil intranodal lymphangiograms were performed, two procedures being repeated interventions. Inguinal lymph node catheterization and ethiodized oil lymphangiography was technically effective in all procedures. A mean of 5.2 ± 2.0 mL of ethiodized oil was used for lymphatic opacification. Cyanoacrylate was diluted to 24.2% with ethiodized oil and 0.44 mL of cyanoacrylate was instilled during first time interventions. On repeat procedures, cyanoacrylate was diluted to 51.7%, and 0.52 mL was instilled. The primary clinical success rate was 50% ( n  = 2/4). Clinical success was achieved in all patients after two interventions ( n  = 4; 100%). No complications were reported at mean follow-up of 134.7 ± 79.2 days (range: 59-248 days). Conclusion: Ethiodized oil intranodal lymphangiography with direct cyanoacrylate glue embolization is a minimally invasive treatment option for lymphatic leak after pelvic resection.

21 CFR 520.260 - n-Butyl chloride capsules.

Code of Federal Regulations, 2012 CFR

2012-04-01

... require 3 or 4 doses at 10-day intervals. (c) Puppies, dogs, cats, or kittens weighing 1 to 3 pounds... of n-butyl chloride in each capsule. (2) Sponsor. See No. 021091 in § 510.600(c) of this chapter. (3... ascarid (Toxocara cati) and hookworm (Ancylostoma tubaeforme) from cats. (ii)(a) Animals should not be fed...

40 CFR 721.10193 - 1-Butanaminium, N-(3-aminopropyl)-N-butyl-N-(2-carboxyethyl)-, N-coco acyl derivs., inner salts.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false 1-Butanaminium, N-(3-aminopropyl)-N-butyl-N-(2-carboxyethyl)-, N-coco acyl derivs., inner salts. 721.10193 Section 721.10193 Protection of... CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10193 1-Butanaminium, N-(3...

Persistence of pulmonary arteriovenous malformations after successful embolotherapy with Amplatzer vascular plug: long-term results

PubMed Central

Abdel-Aal, Ahmed Kamel; Ibrahim, Rafik Mohamed; Moustafa, Amr Soliman; Hamed, Maysoon Farouk; Saddekni, Souheil

2016-01-01

PURPOSE We aimed to evaluate the frequency of persistence and complication rates of pulmonary arteriovenous malformations (PAVMs) treated with Amplatzer vascular plug (AVP) or Amplatzer vascular plug type 2 (AVP2). METHODS We retrospectively reviewed a total of 22 patients with 54 PAVMs between June 2004 and June 2014. We included 12 patients with 35 PAVMs who received percutaneous embolization using AVP or AVP2 only without the use of any other embolic devices. The mean follow-up was 54±24.3 months (range, 31–97 months). The primary end-points of the study were the efficacy of embolotherapy, the increase in oxygen saturation, and the persistence of PAVM on follow-up. Secondary end point was the incidence of complications. RESULTS The study included 10 female and two male patients with a mean age of 50.2±13.7 years (range, 21–66 years). All PAVMs had a simple angioarchitecture. The technical success of the procedure for PAVM occlusion was 100%. There was a significant increase in the oxygen saturation following embolotherapy (P < 0.0001). Follow-up computed tomography angiography revealed successful treatment in 34 PAVMs (97%) and failed treatment in one PAVM (3%). Twenty-three aneurysmal sacs (67%) showed complete disappearance. The failed treatment was due to persistence of PAVM caused by subsequent development of systemic reperfusion, which did not require further intervention. There were two minor complications but no major complications were encountered. CONCLUSION Embolotherapy of PAVMs using AVP or AVP2 devices is safe and effective, with high technical success rate, low persistence and complication rates, and with excellent long-term results. PMID:27244759

Collagen-Based Fillers as Alternatives to Cyanoacrylate Glue for the Sealing of Large Corneal Perforations.

PubMed

Samarawickrama, Chameen; Samanta, Ayan; Liszka, Aneta; Fagerholm, Per; Buznyk, Oleksiy; Griffith, May; Allan, Bruce

2018-05-01

To describe the use of collagen-based alternatives to cyanoacrylate glue for the sealing of acute corneal perforations. A collagen analog comprising a collagen-like peptide conjugated to polyethylene glycol (CLP-PEG) and its chemical crosslinker were tested for biocompatibility. These CLP-PEG hydrogels, which are designed to act as a framework for corneal tissue regeneration, were then tested as potential fillers in ex vivo human corneas with surgically created full-thickness perforations. Bursting pressures were measured in each of 3 methods (n = 10 for each condition) of applying a seal: 1) cyanoacrylate glue with a polyethylene patch applied ab externo (gold standard); 2) a 100-μm thick collagen hydrogel patch applied ab interno, and 3) the same collagen hydrogel patch applied ab interno supplemented with CLP-PEG hydrogel molded in situ to fill the remaining corneal stromal defect. Cyanoacrylate gluing achieved a mean bursting pressure of 325.9 mm Hg, significantly higher than the ab interno patch alone (46.3 mm Hg) and the ab interno patch with the CLP-PEG filler (86.6 mm Hg). All experimental perforations were sealed effectively using 100 μm hydrogel sheets as an ab interno patch, whereas conventional ab externo patching with cyanoacrylate glue failed to provide a seal in 30% (3/10) cases. An ab interno patch system using CLP-PEG hydrogels designed to promote corneal tissue regeneration may be a viable alternative to conventional cyanoacrylate glue patching for the treatment of corneal perforation. Further experimentation and material refinement is required in advance of clinical trials.

Prospective study of bacteremia rate after elective band ligation and sclerotherapy with cyanoacrylate for esophageal varices in patients with advanced liver disease.

PubMed

Bonilha, Danielle Queiroz; Correia, Lucianna Motta; Monaghan, Marie; Lenz, Luciano; Santos, Marcus; Libera, Ermelindo Della

2011-01-01

Band ligation (BL) is the most appropriate endoscopic treatment for acute bleeding or prophylaxis of esophageal variceal bleeding. Sclerotherapy with N-butyl-2-cyanoacrylate (CY) can be an alternative for patients with advanced liver disease. Bacteremia is an infrequent complication after BL while the bacteremia rate following treatment with CY for esophageal varices remains unknown. To evaluate and compare the incidence of transient bacteremia between cirrhotic patients submitted to diagnostic endoscopy, CY and BL for treatment of esophageal varices. A prospective study comprising the period from 2004 to 2007 was conducted at Hospital of Universidade Federal de São Paulo, UNIFESP, SP, Brazil. Cirrhotic patients with advanced liver disease (Child-Pugh B or C) were enrolled. The patients were divided into two groups according treatment: BL Group (patients undergoing band ligation, n = 20) and CY Group (patients receiving cyanoacrylate injection for esophageal variceal, n = 18). Cirrhotic patients with no esophageal varices or without indication for endoscopic treatment were recruited as control (diagnostic group n = 20). Bacteremia was evaluated by blood culture at baseline and 30 minutes after the procedure. After 137 scheduled endoscopic procedures, none of the 58 patients had fever or any sign suggestive of infection. All baseline cultures were negative. No positive cultures were observed after CY or in the control group - diagnostic endoscopy. Three (4.6 %) positive cultures were found out of the 65 sessions of band ligation (P = 0.187). Two of these samples were positive for coagulase-negative staphylococcus, which could be regarded as a contaminant. The isolated microorganism in the other case was Klebsiella oxytoca. The patient in this case presented no evidence of immunodeficiency except liver disease. There was no significant difference in bacteremia rate between these three groups. BL or CY injection for non-bleeding esophageal varices may be considered

N-tert-Butyl-N'-(5,7-dimethyl-1,8-naphthyridin-2-yl)urea.

PubMed

Lüning, U; Kühl, C; Bolte, M

2001-08-01

The title compound, C(15)H(20)N(4)O, has been synthesized as an AADD recognition unit for quadruple hydrogen bonds. All non-H atoms of the molecule apart from two methyl groups of the tert-butyl group lie in a common plane. An intramolecular hydrogen bond is formed connecting two N atoms. In the solid state, the title compound crystallizes as a centrosymmetric dimer connected by N-H...O=C interactions with an N...O distance of 2.824 (2) A.

The Millimeterwave Spectrum of n-BUTYL Cyanide

NASA Astrophysics Data System (ADS)

Ordu, Matthias H.; Müller, Holger S. P.; Lewen, Frank; Schlemmer, Stephan; Nez, Marc Nu; Walters, Adam

2011-06-01

The rotational spectrum of n-butyl cyanide (C_4H_9CN) was measured between 75 and 130 GHz using a novel all-solid-state spectrometer with a total absorption path of 44 m. In the course of the analysis of the spectrum, about 3000 transitions were assigned and a full set of quartic centrifugal distortion parameters with some sextic and octic terms could be determined for each of the three known conformers (anti-anti, anti-gauche(methyl end) and gauche(CN end)-anti). The work was motivated by the fact that n-butyl cyanide is likely to be found in interstellar hot core environments. This is indicated by the discovery of n-propyl cyanide (C_3H_7CN), the next smaller alkyl cyanide, in the ISM. The increased accuracy of the model, which will be additionally extended by future laboratory measurements around 200 GHz, may now be employed for a prediction of the spectrum up to 300 GHz with a feasible uncertainty for astronomic line surveys. Furthermore, there are two less abundant conformers, cis-gauche-gauche and trans-gauche-gauche, which have not yet been detected in the rotational spectrum. Due to the increased sensitivity of the new spectrometer, it seems possible now for the first time to identify their sectroscopic fingerprints in the recorded data. A. Belloche, R. T. Garrod, H. S. P.Müller, K. M. Menten, C. Comito, and P. Schilke, Astronomy & Astrophysics 499, 215 (2009) R. K. Bohn, J. L. Pardus, J. August, T. Brupbacher, W. Jäger, J. Mol. Struct. 413-414, 293 (1997)

Angiographic Findings and Embolotherapy in Renal Arterial Trauma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sofocleous, Constantinos T., E-mail: constant@pol.net; Hinrichs, Clay; Hubbi, Basil

Purpose To evaluate the angiographic findings and embolotherapy in the management of traumatic renal arterial injury Methods This is a retrospective review of 22 patients with renal trauma who underwent arteriography and percutaneous embolization from December 1995 to January 2002. Medical records, imaging studies and procedural reports were reviewed to assess the type of injury, arteriographic findings and immediate embolization results. Long-term clinical outcome was obtained by communication with the trauma physicians and by clinical chart review.Results Arteriography was performed in 125 patients admitted to a State Trauma Center with suspected internal bleeding. Renal arterial injury was documented in 22more » and was the result of a motor-vehicle accident (10), auto-pedestrian accident (1), gunshot (4) or stab wounds (6) and a fall (1). Percutaneous renal arterial embolization was undertaken in 22 of 125 (18%) patients to treat extravasation (11), arterial pedicle rupture (5), abnormal arteriovenous (3) or arteriocalyceal (2) communication and pseudoaneurysm (3). One of the pseudoaneurysms and one of the arteriovenous fistulae were found in addition to extravasation. All 22 patients (16 men, 6 women) were hemodynamically stable, or controlled during arteriography and embolotherapy. Selective and/or superselective embolization of the abnormal vessels was performed using coils in 9 patients, microcoils in 9 patients and Gelfoam pledgets in 3 patients. In one patient Gelfoam pledgets mixed with polyvinyl alcohol (PVA) particles were used for embolization. Immediate angiographic evidence of hemostasis was demonstrated in all cases. Two initial technical failures were treated with repeat arteriography and embolization. There was no procedure-related death. There was no non-target embolization. One episode of renal abscess after embolization was treated by nephrectomy and 3 patients underwent elective post-embolization nephrectomy to prevent infection. Follow

Use of cyanoacrylate in the coaptation of edges of surgical wounds*

PubMed Central

Lins, Ruthinéia Diógenes Alves Uchôa; Gomes, Raquel Christina Barboza; dos Santos, Kátia Simone Alves; da Silva, Paula Vanessa; da Silva, Renata Torres Moreira; Ramos, Ianny Alves

2012-01-01

Cyanoacrylate has been used in several fields of different surgical specialties as an adhesive for closure of gingival flaps and in mucous and cutaneous lacerations. One of its advantages is that it has an excellent immunological response. In view of aesthetic needs, cyanoacrylate has been applied with satisfactory results, when compared with sutures. It presents better coaptation of edges of cutaneous and mucosal lesions, smaller residual scars, and biocompatibility. However, it is limited to areas of little tissue tension. This work attempts to provide a literature review with the aim of revealing the advantages of using tissue adhesives, especially cyanoacrylates, in wound coaptation in comparison with conventional methods. PMID:23197206

Cyanoacrylate medical glue application in intervertebral disc annulus defect repair: Mechanical and biocompatible evaluation.

PubMed

Kang, Ran; Li, Haisheng; Lysdahl, Helle; Quang Svend Le, Dang; Chen, Menglin; Xie, Lin; Bünger, Cody

2017-01-01

In an attempt to find an ideal closure method during annulus defect repair, we evaluate the use of medical glue by mechanical and biocompatible test. Cyanoacrylate medical glue was applied together with a multilayer microfiber/nanofiber polycaprolactone scaffold and suture in annulus repair. Continuous axial loading and fatigue mechanical test was performed. Furthermore, the in vitro response of mesenchymal stem cell (MSC) to the glue was evaluated by cell viability assay. The in vivo response of annulus tissue to the glue and scaffold was also studied in porcine lumbar spine; histological sections were evaluated after 3 months. Cyanoacrylate glue significantly improved the closure effect in the experimental group with failure load 2825.7 ± 941.6 N, compared to 774.1 ± 281.3 N in the control group without glue application (p < 0.01). The experimental group also withstood the fatigue test. No toxic effect was observed by in vitro cell culture and in vivo implantation. On the basis of this initial evaluation, the use of cyanoacrylate medical glue improves closure effect with no toxicity in annulus defect repair. This method of annulus repair merits further effectiveness study in vivo. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 14-20, 2017. © 2015 Wiley Periodicals, Inc.

Mounting ground sections of teeth: Cyanoacrylate adhesive versus Canada balsam.

PubMed

Vangala, Manogna Rl; Rudraraju, Amrutha; Subramanyam, R V

2016-01-01

Hard tissues can be studied by either decalcification or by preparing ground sections. Various mounting media have been tried and used for ground sections of teeth. However, there are very few studies on the use of cyanoacrylate adhesive as a mounting medium. The aim of our study was to evaluate the efficacy of cyanoacrylate adhesive (Fevikwik™) as a mounting medium for ground sections of teeth and to compare these ground sections with those mounted with Canada balsam. Ground sections were prepared from twenty extracted teeth. Each section was divided into two halves and mounted on one slide, one with cyanoacrylate adhesive (Fevikwik™) and the other with Canada balsam. Scoring for various features in the ground sections was done by two independent observers. Statistical analysis using Student's t-test (unpaired) of average scores was performed for each feature observed. No statistically significant difference was found between the two for most of the features. However, cyanoacrylate was found to be better than Canada balsam for observing striae of Retzius (P < 0.0205), enamel lamellae (P < 0.036), dentinal tubules (P < 0.0057), interglobular dentin (P < 0.0001), sclerotic dentin - transmitted light (P < 0.00001), sclerotic dentin - polarized light (P < 0.0002) and Sharpey's fibers (P < 0.0004). This initial study shows that cyanoacrylate is better than Canada balsam for observing certain features of ground sections of teeth. However, it remains to be seen whether it will be useful for studying undecalcified sections of carious teeth and for soft tissue sections.

Mounting ground sections of teeth: Cyanoacrylate adhesive versus Canada balsam

PubMed Central

Vangala, Manogna RL; Rudraraju, Amrutha; Subramanyam, RV

2016-01-01

Introduction: Hard tissues can be studied by either decalcification or by preparing ground sections. Various mounting media have been tried and used for ground sections of teeth. However, there are very few studies on the use of cyanoacrylate adhesive as a mounting medium. Aims: The aim of our study was to evaluate the efficacy of cyanoacrylate adhesive (Fevikwik™) as a mounting medium for ground sections of teeth and to compare these ground sections with those mounted with Canada balsam. Materials and Methods: Ground sections were prepared from twenty extracted teeth. Each section was divided into two halves and mounted on one slide, one with cyanoacrylate adhesive (Fevikwik™) and the other with Canada balsam. Scoring for various features in the ground sections was done by two independent observers. Statistical Analysis Used: Statistical analysis using Student's t-test (unpaired) of average scores was performed for each feature observed. Results: No statistically significant difference was found between the two for most of the features. However, cyanoacrylate was found to be better than Canada balsam for observing striae of Retzius (P < 0.0205), enamel lamellae (P < 0.036), dentinal tubules (P < 0.0057), interglobular dentin (P < 0.0001), sclerotic dentin – transmitted light (P < 0.00001), sclerotic dentin – polarized light (P < 0.0002) and Sharpey's fibers (P < 0.0004). Conclusions: This initial study shows that cyanoacrylate is better than Canada balsam for observing certain features of ground sections of teeth. However, it remains to be seen whether it will be useful for studying undecalcified sections of carious teeth and for soft tissue sections. PMID:27194857

Percutaneous trans-hepatic gelfoam-cyanoacrylate glue embolization for ruptured post-traumatic hepatic artery pseudo-aneurysm in a limited-resource scenario.

PubMed

Kumar, Manoj; Goel, Prabudh; Rawat, J D; Kumari, Shweta; Shankhwar, S N; Kureel, S N

2013-05-01

We present our experience with an indigenously designed percutaneous trans-hepatic ultrasound-guided Gelfoam sponge cum cyanoacrylate glue-based embolization technique for the treatment of a ruptured post-traumatic aneurysm of a branch of the right hepatic artery (RHA) as a 'life-saving emergent' procedure in a patient unfit for surgery or endovascular intervention and in a 'limited-resource' scenario (non-availability of Digital Subtraction Angiography Suite). An 8-year-old boy sustained crush-injury to the right lobe of the liver in a road-traffic accident and presented in shock. After resuscitation, a laparotomy and repair of the right lobe of liver were undertaken. Bleeding restarted 1 week after the surgery; the patient bled from drain site and went into shock. Exploration was not advisable in view of poor general condition, and sepsis, deranged coagulation and parental reluctance in view of guarded prognosis. Multi-detector Computed Tomography Angiography was performed after resuscitation which revealed active bleed from a ruptured pseudo-aneurysm of a branch of RHA. The bleeding artery was identified with duplex sonography and was embolized by the percutaneous trans-hepatic route proximal to the site of pseudo-aneurysm and rupture by a two-step process. Initially, a thin paste/'slurry' made of powdered gelfoam dissolved in sterile saline was injected into the bleeding vessel. Subsequently, the area was sealed by injecting 1.0 ml of N-butyl-2-cyanoacrylate glue. Hemostasis was confirmed by Color and Power Doppler Ultrasonography both post-procedure and after 48 h. With supportive management, the patient showed a rapid recovery and was discharged after 2 weeks. He continues to be well at 3-month follow-up. The technique was effective in controlling hemostasis and life-saving in our set-up.

Comparison of polyurethane with cyanoacrylate in hemostasis of vascular injury in guinea pigs.

PubMed

Kubrusly, Luiz Fernando; Formighieri, Marina Simões; Lago, José Vitor Martins; Graça, Yorgos Luiz Santos de Salles; Sobral, Ana Cristina Lira; Lago, Marianna Martins

2015-01-01

To evaluate the behavior of castor oil-derived polyurethane as a hemostatic agent and tissue response after abdominal aortic injury and to compare it with 2-octyl-cyanoacrylate. Twenty-four Guinea Pigs were randomly divided into three groups of eight animals (I, II, and III). The infrarenal abdominal aorta was dissected, clamped proximally and distally to the vascular puncture site. In group I (control), hemostasis was achieved with digital pressure; in group II (polyurethane) castor oil-derived polyurethane was applied, and in group III (cyanoacrylate), 2-octyl-cyanoacrylate was used. Group II was subdivided into IIA and IIB according to the time of preparation of the hemostatic agent. Mean blood loss in groups IIA, IIB and III was 0.002 grams (g), 0.008 g, and 0.170 g, with standard deviation of 0.005 g, 0.005 g, and 0.424 g, respectively (P=0.069). The drying time for cyanoacrylate averaged 81.5 seconds (s) (standard deviation: 51.5 seconds) and 126.1 s (standard deviation: 23.0 s) for polyurethane B (P=0.046). However, there was a trend (P=0.069) for cyanoacrylate to dry more slowly than polyurethane A (mean: 40.5 s; SD: 8.6 s). Furthermore, polyurethane A had a shorter drying time than polyurethane B (P=0.003), mean IIA of 40.5 s (standard deviation: 8.6 s). In group III, 100% of the animals had mild/severe fibrosis, while in group II only 12.5% showed this degree of fibrosis (P=0.001). Polyurethane derived from castor oil showed similar hemostatic behavior to octyl-2-cyanoacrylate. There was less perivascular tissue response with polyurethane when compared with cyanoacrylate.

Embolotherapy in the management of hepatocellular carcinoma.

PubMed

Mojtahedi, Alireza; Yang, Xiaoming; Goswami, Gaurav K

2008-09-01

Hepatocellular carcinoma (HCC) ranks fifth in frequency of cancers worldwide. The incidence of HCC in the United States is rising, primarily due to the number of patients who were infected by hepatitis in the 1960s and 1970s coupled with the rising migrant population from Asia, where hepatitis is widely prevalent. Up to 80% of the patients present with multicentric HCC and advanced liver disease or comorbidities that restrict the option of resection or liver transplantation. The dual blood supply (arterial and portal) to the liver with predominantly arterial supply to the tumor has made embolotherapy a cornerstone in the management of inoperable HCC. The techniques have become refined not only due to the development of microcatheter angiographic capabilities, but also in the ability to deliver a wide variety of therapeutic agents to these tumors. This article reviews the fundamental principles of bland embolization, chemoembolization, and radioembolization in the management of HCC.

Acoustic droplet vaporization of vascular droplets in gas embolotherapy

NASA Astrophysics Data System (ADS)

Bull, Joseph

2016-11-01

This work is primarily motivated by a developmental gas embolotherapy technique for cancer treatment. In this methodology, infarction of tumors is induced by selectively formed vascular gas bubbles that arise from the acoustic vaporization of vascular droplets. Additionally, micro- or nano-droplets may be used as vehicles for localized drug delivery, with or without flow occlusion. In this talk, we examine the dynamics of acoustic droplet vaporization through experiments and theoretical/computational fluid mechanics models, and investigate the bioeffects of acoustic droplet vaporization on endothelial cells and in vivo. Functionalized droplets that are targeted to tumor vasculature are examined. The influence of fluid mechanical and acoustic parameters, as well as droplet functionalization, is explored. This work was supported by NIH Grant R01EB006476.

Local and systemic effects of fibrin and cyanoacrylate adhesives on lung lesions in rabbits

PubMed Central

Carvalho, Marcus V.H.; Marchi, Evaldo; Fruchi, Andre J.; Dias, Bruno V.B.; Pinto, Clovis L.; dos Santos, Geovane R.; Acencio, Milena M.P.

2017-01-01

OBJECTIVES: Tissue adhesives can be used to prevent pulmonary air leaks, which frequently occur after lung interventions. The objective of this study is to evaluate local and systemic effects of fibrin and cyanoacrylate tissue adhesives on lung lesions in rabbits. METHODS: Eighteen rabbits were submitted to videothoracoscopy + lung incision alone (control) or videothoracoscopy + lung incision + local application of fibrin or cyanoacrylate adhesive. Blood samples were collected and assessed for leukocyte, neutrophil and lymphocyte counts and interleukin-8 levels preoperatively and at 48 hours and 28 days post-operatively. After 28 days, the animals were euthanized for gross examination of the lung surface, and lung fragments were excised for histopathological analysis. RESULTS: Fibrin and cyanoacrylate produced similar adhesion scores of the lung to the parietal pleura. Microscopic analysis revealed uniform low-cellular tissue infiltration in the fibrin group and an intense tissue reaction characterized by dense inflammatory infiltration of granulocytes, giant cells and necrosis in the cyanoacrylate group. No changes were detected in the leukocyte, neutrophil or lymphocyte count at any time-point, while the interleukin-8 levels were increased in the fibrin and cyanoacrylate groups after 48 hours compared with the pre-operative control levels (p<0.01). CONCLUSION: Both adhesive agents promoted normal tissue healing, with a more pronounced local inflammatory reaction observed for cyanoacrylate. Among the serum markers of inflammation, only the interleukin-8 levels changed post-operatively, increasing after 48 hours and decreasing after 28 days to levels similar to those of the control group in both the fibrin and cyanoacrylate groups. PMID:29160425

Local and systemic effects of fibrin and cyanoacrylate adhesives on lung lesions in rabbits.

PubMed

Carvalho, Marcus V H; Marchi, Evaldo; Fruchi, Andre J; Dias, Bruno V B; Pinto, Clovis L; Dos Santos, Geovane R; Acencio, Milena M P

2017-10-01

Tissue adhesives can be used to prevent pulmonary air leaks, which frequently occur after lung interventions. The objective of this study is to evaluate local and systemic effects of fibrin and cyanoacrylate tissue adhesives on lung lesions in rabbits. Eighteen rabbits were submitted to videothoracoscopy + lung incision alone (control) or videothoracoscopy + lung incision + local application of fibrin or cyanoacrylate adhesive. Blood samples were collected and assessed for leukocyte, neutrophil and lymphocyte counts and interleukin-8 levels preoperatively and at 48 hours and 28 days post-operatively. After 28 days, the animals were euthanized for gross examination of the lung surface, and lung fragments were excised for histopathological analysis. Fibrin and cyanoacrylate produced similar adhesion scores of the lung to the parietal pleura. Microscopic analysis revealed uniform low-cellular tissue infiltration in the fibrin group and an intense tissue reaction characterized by dense inflammatory infiltration of granulocytes, giant cells and necrosis in the cyanoacrylate group. No changes were detected in the leukocyte, neutrophil or lymphocyte count at any time-point, while the interleukin-8 levels were increased in the fibrin and cyanoacrylate groups after 48 hours compared with the pre-operative control levels (p<0.01). Both adhesive agents promoted normal tissue healing, with a more pronounced local inflammatory reaction observed for cyanoacrylate. Among the serum markers of inflammation, only the interleukin-8 levels changed post-operatively, increasing after 48 hours and decreasing after 28 days to levels similar to those of the control group in both the fibrin and cyanoacrylate groups.

Comparison of polyurethane with cyanoacrylate in hemostasis of vascular injury in guinea pigs

PubMed Central

Kubrusly, Luiz Fernando; Formighieri, Marina Simões; Lago, José Vitor Martins; Graça, Yorgos Luiz Santos de Salles; Sobral, Ana Cristina Lira; Lago, Marianna Martins

2015-01-01

Objective To evaluate the behavior of castor oil-derived polyurethane as a hemostatic agent and tissue response after abdominal aortic injury and to compare it with 2-octyl-cyanoacrylate. Methods Twenty-four Guinea Pigs were randomly divided into three groups of eight animals (I, II, and III). The infrarenal abdominal aorta was dissected, clamped proximally and distally to the vascular puncture site. In group I (control), hemostasis was achieved with digital pressure; in group II (polyurethane) castor oil-derived polyurethane was applied, and in group III (cyanoacrylate), 2-octyl-cyanoacrylate was used. Group II was subdivided into IIA and IIB according to the time of preparation of the hemostatic agent. Results Mean blood loss in groups IIA, IIB and III was 0.002 grams (g), 0.008 g, and 0.170 g, with standard deviation of 0.005 g, 0.005 g, and 0.424 g, respectively (P=0.069). The drying time for cyanoacrylate averaged 81.5 seconds (s) (standard deviation: 51.5 seconds) and 126.1 s (standard deviation: 23.0 s) for polyurethane B (P=0.046). However, there was a trend (P=0.069) for cyanoacrylate to dry more slowly than polyurethane A (mean: 40.5 s; SD: 8.6 s). Furthermore, polyurethane A had a shorter drying time than polyurethane B (P=0.003), mean IIA of 40.5 s (standard deviation: 8.6 s). In group III, 100% of the animals had mild/severe fibrosis, while in group II only 12.5% showed this degree of fibrosis (P=0.001). Conclusion Polyurethane derived from castor oil showed similar hemostatic behavior to octyl-2-cyanoacrylate. There was less perivascular tissue response with polyurethane when compared with cyanoacrylate. PMID:25859876

Controlled Degradation of Poly(Ethyl Cyanoacrylate-Co-Methyl Methacrylate)(PECA-Co-PMMA) Copolymers

USDA-ARS?s Scientific Manuscript database

This paper describes a method for modifying poly(ethyl cyanoacrylate) in order to control the degradation and the stability as well as the glass transition temperatures. Copolymers of poly(ethyl cyanoacrylate-co-methyl methacrylate) (PECA-co-PMMA) with various compositions were synthesized by free ...

Transport of cardiovascular microbubbles in gas embolotherapy

NASA Astrophysics Data System (ADS)

Bull, Joseph L.; Calderon, Andres J.; Eshpuniyani, Brijesh; Valassis, Doug; Fowlkes, J. Brian

2006-11-01

This work is motivated by our ongoing development of a novel gas embolotherapy technique to occlude blood flow to tumors using gas bubbles that are selectively formed by the in vivo acoustic vaporization of liquid perfluorocarbon droplets. The droplets are small enough to pass through the microcirculation, but the subsequent bubbles are large enough to lodge in vessels. The uniformity of tumor infarction depends on the transport the blood-borne bubbles before they stick. We theoretically and experimentally investigate the transport of gas bubbles through bifurcating blood vessels. More homogenous bubble splitting is observed for higher values of capillary numbers and lower values of Bond numbers. The dependence of bubble lodging on flow parameters is also investigated, and several modes of bubble lodging and sticking are identified. These findings indicate the ability of gas bubbles to occlude flow and suggest the potential for development of treatment strategies that uniformly occlude the tumor circulation while minimizing collateral infarction. This work is supported by NSF grant BES-0301278 and NIH grant EB003541.

n-Alkane assimilation and tert-butyl alcohol (TBA) oxidation capacity in Mycobacterium austroafricanum strains.

PubMed

Lopes Ferreira, Nicolas; Mathis, Hugues; Labbé, Diane; Monot, Frédéric; Greer, Charles W; Fayolle-Guichard, Françoise

2007-06-01

Mycobacterium austroafricanum IFP 2012, which grows on methyl tert-butyl ether (MTBE) and on tert-butyl alcohol (TBA), the main intermediate of MTBE degradation, also grows on a broad range of n-alkanes (C2 to C16). A single alkB gene copy, encoding a non-heme alkane monooxygenase, was partially amplified from the genome of this bacterium. Its expression was induced after growth on n-propane, n-hexane, n-hexadecane and on TBA but not after growth on LB. The capacity of other fast-growing mycobacteria to grow on n-alkanes (C1 to C16) and to degrade TBA after growth on n-alkanes was compared to that of M. austroafricanum IFP 2012. We studied M. austroafricanum IFP 2012 and IFP 2015 able to grow on MTBE, M. austroafricanum IFP 2173 able to grow on isooctane, Mycobacterium sp. IFP 2009 able to grow on ethyl tert-butyl ether (ETBE), M. vaccae JOB5 (M. austroaafricanum ATCC 29678) able to degrade MTBE and TBA and M. smegmatis mc2 155 with no known degradation capacity towards fuel oxygenates. The M. austroafricanum strains grew on a broad range of n-alkanes and three were able to degrade TBA after growth on propane, hexane and hexadecane. An alkB gene was partially amplified from the genome of all mycobacteria and a sequence comparison demonstrated a close relationship among the M. austroafricanum strains. This is the first report suggesting the involvement of an alkane hydroxylase in TBA oxidation, a key step during MTBE metabolism.

Demethylation of 5,n-di-tert-butyl-8,n-dimethoxy[2.n]metacyclophane-1-ynes with BBr3 to afford novel [n]benzofuranophanes

NASA Astrophysics Data System (ADS)

Akther, Thamina; Islam, Md Monarul; Matsumoto, Taisuke; Tanaka, Junji; Feng, Xing; Redshaw, Carl; Yamato, Takehiko

2016-10-01

Novel [n]benzofuranophanes (n = 8 & 10) 2a-b have been prepared by successive intramolecular cyclization from 5,19-di-tert-butyl-8,22-dimethoxy[n]metacyclophane-1-yne (syn-1a-b) by treatment with BBr3 in CH2Cl2 at room temperature for 8h. [2.n]Benzofuranophanes 2a-b were also obtained by treatment of 1,2-di-endo-bromo-5,19-di-tert-butyl-8,22-dimethoxy[n]metacyclophane (meso-3a-b) with BBr3 in CH2Cl2 by using the same reaction conditions. 1H NMR spectra of 2a-b reveals the formation of intramolecular hydrogen bonding between hydroxyl proton with the oxygen of the furan moiety and X-ray analysis shows that the lengths between H (OH) and O (furan) are 1.981 and 1.823 Å̊, respectively. The conformation of [8]benzofuranophane 2a in solution is rigid with restricted rotation around the diaryl linkage rather than [10]benzofuranophane 2b because of weak intramolecular hydrogen bonding and the short length of the cross-linking chain.

RATE CONSTANTS FOR THE REACTIONS OF OH RADICALS AND CL ATOMS WITH DI-N-PROPYL ETHER AND DI-N-BUTYL ETHER AND THEIR DEUTERATED ANALOGS. (R825252)

EPA Science Inventory

Using relative rate methods, rate constants for the gas-phase reactions of OH radicals and Cl atoms with di-n-propyl ether, di-n-propyl ether-d₁₄, di-n-butyl ether and di-n-butyl ether-d₁₈ have been measured at 296 ? 2 K and atmos...

Bio-Source of di-n-butyl phthalate production by filamentous fungi

NASA Astrophysics Data System (ADS)

Tian, Congkui; Ni, Jinren; Chang, Fang; Liu, Sitong; Xu, Nan; Sun, Weiling; Xie, Yuan; Guo, Yongzhao; Ma, Yanrong; Yang, Zhenxing; Dang, Chenyuan; Huang, Yuefei; Tian, Zhexian; Wang, Yiping

2016-02-01

Although DBP (di-n-butyl phthalate) is commonly encountered as an artificially-synthesized plasticizer with potential to impair fertility, we confirm that it can also be biosynthesized as microbial secondary metabolites from naturally occurring filamentous fungi strains cultured either in an artificial medium or natural water. Using the excreted crude enzyme from the fungi for catalyzing a variety of substrates, we found that the fungal generation of DBP was largely through shikimic acid pathway, which was assembled by phthalic acid with butyl alcohol through esterification. The DBP production ability of the fungi was primarily influenced by fungal spore density and incubation temperature. This study indicates an important alternative natural waterborne source of DBP in addition to artificial synthesis, which implied fungal contribution must be highlighted for future source control and risk management of DBP.

Processes involved in the development of latent fingerprints using the cyanoacrylate fuming method.

PubMed

Lewis, L A; Smithwick, R W; Devault, G L; Bolinger, B; Lewis, S A

2001-03-01

Chemical processes involved in the development of latent fingerprints using the cyanoacrylate fuming method have been studied. Two major types of latent prints have been investigated-clean and oily prints. Scanning electron microscopy (SEM) has been used as a tool for determining the morphology of the polymer developed separately on clean and oily prints after cyanoacrylate fuming. A correlation between the chemical composition of an aged latent fingerprint, prior to development, and the quality of a developed fingerprint has been observed in the morphology. The moisture in the print prior to fuming has been found to be more important than the moisture in the air during fuming for the development of a useful latent print. In addition, the amount of time required to develop a high quality latent print has been found to be within 2 min. The cyanoacrylate polymerization process is extremely rapid. When heat is used to accelerate the fuming process, typically a period of 2 min is required to develop the print. The optimum development time depends upon the concentration of cyanoacrylate vapors within the enclosure.

40 CFR 180.576 - Cyhalofop-butyl; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Cyhalofop-butyl; tolerances for... § 180.576 Cyhalofop-butyl; tolerances for residues. (a) General. Time-limited tolerances are established for combined residues of cyhalofop (cyhalofop-butyl, R-(+)-n-butyl-2-(4(4-cyano-2-fluorophenoxy...

40 CFR 180.576 - Cyhalofop-butyl; tolerances for residues.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Cyhalofop-butyl; tolerances for... § 180.576 Cyhalofop-butyl; tolerances for residues. (a) General. Time-limited tolerances are established for combined residues of cyhalofop (cyhalofop-butyl, R-(+)-n-butyl-2-(4(4-cyano-2-fluorophenoxy...

Fabrication of self-organized conical microstructures by excimer laser irradiation of cyanoacrylate-carbon nanotube composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu Yuming; Liu Liang; Fan Shoushan

2005-02-07

Self-organized conical microstructures are fabricated by 308 nm XeCl excimer laser irradiation of cyanoacrylate-carbon nanotube composites in air. The morphology of the surface on the composite films is studied, varying the total number and fluence of the applied laser pulses. A simple mechanism of the fabrication based on the evaporation of cyanoacrylate and the burning of carbon nanotubes is proposed. The conical peak structures of cyanoacrylate-carbon nanotube composite films show good field-emission properties. Similar structures are also observed on carbon nanotube arrays.

No Promoting Effect of Ethyl Tertiary-butyl Ether (ETBE) on Rat Urinary Bladder Carcinogenesis Initiated with N-Butyl-N-(4-hydroxybutyl)nitrosamine

PubMed Central

Hagiwara, Akihiro; Imai, Norio; Doi, Yuko; Suguro, Mayuko; Kawabe, Mayumi; Furukawa, Fumio; Nagano, Kasuke; Fukushima, Shoji

2013-01-01

The effects of ethyl tertiary-butyl ether (ETBE) on two-stage urinary bladder carcinogenesis in male F344 rats initiated with N-butyl-N-(4-hydroxybutyl)nitrosamine (BBN) were investigated at various dose levels with regard to possible promoting activity. Groups of 30 rats were given drinking water containing 500 ppm BBN, as an initiator, for 4 weeks and starting one week thereafter received ETBE by gavage (daily, 7 days/week) at dose levels of 0 (control), 100, 300, 500 or 1000 mg/kg/day until experimental week 36. No statistically significant differences in incidences of preneoplastic lesions, papillomas, and carcinomas of the urinary bladder were evident in rats treated with 100–1000 mg/kg/day ETBE as compared with control values. Furthermore, the average numbers of preneoplastic or neoplastic lesions per unit length of basement membrane in rats given 100–1000 mg/kg/day ETBE were also comparable to control values. However, papillomatosis of the urinary bladder was found in 4 out of 30 rats (13%) in the group given 1000 mg/kg/day ETBE, and soft stones in the urinary bladder were found in 3 out of these 4 rats. The results thus demonstrated that ETBE did not exert promotional activity on urinary bladder carcinogenesis. However, papillomatosis of the urinary bladder developed in small numbers of the rats given ETBE at 1000 mg/kg/day but not in rats given 500 mg/kg/day or lower doses. PMID:24526807

An Ex Vivo Comparison of 2 Cyanoacrylate Skin Protectants.

PubMed

Gibson, Daniel J

The purpose of these experiments was to compare 2 commercially available skin protectants with different chemical compositions. Two materially different skin protectants were applied to ex vivo pig skin, subjected to stresses, and the resulting skin was observed and analyzed. Using ex vivo pig skin, we sought to better understand the physical differences between a cyanoacrylate-based and a mixed cyanoacrylate/acrylic polymer-based skin protectant. A combination of imaging techniques and microscopic analyses was used to observe and quantify differences in layer thickness and the degree of steadfastness of the layers to liquid stresses. The experiments revealed that the solely cyanoacrylate-based protectant created a layer that was, on average, 5.1 times thicker than the mixed polymer product (p= 1.8 × 10). Observation via electron microscopy also revealed that the extent of coverage varied between the 2 products. In a final experiment, we observed that the mixed polymer product maintained a high degree of adhesiveness, which led to the removal of sheets of epithelium upon gentle blotting. The experiments revealed that while the 2 skin protectants share a common ingredient, both the quantity of that ingredient and the inclusion of other materials in one of them lead to substantially different properties when tested in the research setting.

Bubble transport and sticking in gas embolotherapy

NASA Astrophysics Data System (ADS)

Bull, Joseph

2002-11-01

Pressure-driven bubble transport in a two-dimensional, bifurcating channel is investigated as a model of gas emboli transport in the microcirculation. Gas emboli are relevant to a number of clinical situations, and our particular interest is a novel gas embolotherapy technique, which involves using gas bubbles to occlude blood flow to tumors. This minimally invasive treatment modality allows selective delivery of emboli. The bubbles originate as 6 micron-diameter liquid droplets of perfluorocarbon (PFC), mixed in saline, and are injected into the vascular system. The droplet forms are small enough to pass through capillary beds, so they can circulate until the next stage of the therapy. By strategically placing an ultrasound source over the artery feeding the tumor, the droplets may be vaporized at that location. Our model is developed using the Stokes equation subject to interfacial and wall boundary conditions, and is solved using the boundary element method. The conditions under which bubbles 'stick' to the channel walls and occlude flow are investigated. Clinically, these results are important because the location and homogeneity of bubble sticking determines the degree of tumor necrosis and the efficacy of the treatment.

Cyanoacrylate glue as an alternative mounting medium for resin-embedded semithin sections.

PubMed

Liu, Pei-Yun; Phillips, Gael E; Kempf, Margit; Cuttle, Leila; Kimble, Roy M; McMillan, James R

2010-01-01

Commercially available generic Superglue (cyanoacrylate glue) can be used as an alternative mounting medium for stained resin-embedded semithin sections. It is colourless and contains a volatile, quick-setting solvent that produces permanent mounts of semithin sections for immediate inspection under the light microscope. Here, we compare the use of cyanoacrylate glue for mounting semithin sections with classical dibutyl phthalate xylene (DPX) in terms of practical usefulness, effectiveness and the quality of the final microscopic image.

Cycloolefin/cyanoacrylate (COCA) copolymers for 193-nm and 157-nm lithography

NASA Astrophysics Data System (ADS)

Dammel, Ralph R.; Sakamuri, Raj; Lee, Sang-Ho; Rahman, Dalil; Kudo, Takanori; Romano, Andrew R.; Rhodes, Larry F.; Lipian, John-Henry; Hacker, Cheryl; Barnes, Dennis A.

2002-07-01

The copolymerization reaction between methyl cyanoacrylate (MCA) and a variety of cycloolefins (CO) was investigated. Cycololefin/cyanoacrylate (COCA) copolymers were obtained in good yields and with lithographically interesting molecular weights for all cycoolefins studied. Anionic MCA homopolymerization could be largely suppressed using acetic acid. Based on NMR data, the copolymerization may tend to a 1:1 CO:MCA incorporation ratio but further work with better suppression of the anionic component is needed to confirm this. Lithographic tests on copolymers of appropriately substituted norbornenes and MCA showed semi-dense and isolated line performance down to 90 nm.

Occupational asthma due to methyl methacrylate and cyanoacrylates.

PubMed Central

Lozewicz, S; Davison, A G; Hopkirk, A; Burge, P S; Boldy, D A; Riordan, J F; McGivern, D V; Platts, B W; Davies, D; Newman Taylor, A J

1985-01-01

Five patients had asthma provoked by cyanoacrylates and one by methyl methacrylate, possibly because of the development of a specific hypersensitivity response. Acrylates have wide domestic as well as industrial uses, and inhalation of vapour emitted during their use can cause asthma. PMID:4071461

Method for photochemical reduction of uranyl nitrate by tri-N-butyl phosphate and application of this method to nuclear fuel reprocessing

DOEpatents

De Poorter, Gerald L.; Rofer-De Poorter, Cheryl K.

1978-01-01

Uranyl ion in solution in tri-n-butyl phosphate is readily photochemically reduced to U(IV). The product U(IV) may effectively be used in the Purex process for treating spent nuclear fuels to reduce Pu(IV) to Pu(III). The Pu(III) is readily separated from uranium in solution in the tri-n-butyl phosphate by an aqueous strip.

Anionic Photopolymerization of Methyl-2-Cyanoacrylate and Simultaneous Color Formation

DTIC Science & Technology

2000-11-15

Anionic polymerization of methyl 2-cyanoacrylate initiated by photoinduced heterolysis of crystal violet leuconitrile (CVCN) and of malachite green leucohydroxide (MGOH) is demonstrated. Polymerization is accompanied by color formation.

Cirsoid aneurysm of the right pre-auricular region: an unusual cause of tinnitus managed by endovascular glue embolisation.

PubMed

Kumar, A; Ahuja, C K; Khandelwal, N; Bakshi, J B

2012-09-01

We report an interesting case of a right temporal pre-auricular arteriovenous fistula (cirsoid aneurysm) causing intractable tinnitus successfully managed by transarterial n-butyl cyanoacrylate glue embolisation. A 52-year-old female presented with a one-year history of tinnitus and pulsatile swelling in the right pre-auricular region. A colour Doppler ultrasound test and magnetic resonance angiography revealed a high-flow scalp arteriovenous fistula with a feeder vessel from the distal superficial temporal artery, which drained into the corresponding, dilated, tortuous vein. The patient underwent diagnostic digital subtraction angiography. This was followed by transarterial embolisation of the fistula using a 50 per cent mixture of n-butyl cyanoacrylate glue and Lipiodol®, with manual distal venous occlusion. A successful outcome was achieved with instant relief of symptoms. Cirsoid aneurysms of the facial region, an uncommon cause of tinnitus, can be effectively managed by endovascular embolisation. This treatment obviates the need for surgery, which is associated with an increased risk of complications such as scarring, deformity and bleeding.

Bis(O-n-butyl dithio-carbonato-κS,S')bis-(pyridine-κN)manganese(II).

PubMed

Alam, Naveed; Ehsan, Muhammad Ali; Zeller, Matthias; Mazhar, Muhammad; Arifin, Zainudin

2011-08-01

The structure of the title manganese complex, [Mn(C(5)H(9)OS(2))(2)(C(5)H(5)N)(2)] or [Mn(S(2)CO-n-Bu)(2)(C(5)H(5)N)(2)], consists of discrete monomeric entities with Mn(2+) ions located on centres of inversion. The metal atom is coordinated by a six-coordinate trans-N(2)S(4) donor set with the pyridyl N atoms located in the apical positions. The observed slight deviations from octa-hedral geometry are caused by the bite angle of the bidentate κ(2)-S(2)CO-n-Bu ligands [69.48 (1)°]. The O(CH(2))(3)(CH(3)) chains of the O-n-butyl dithio-carbonate units are disordered over two sets of sites with an occupancy ratio of 0.589 (2):0.411 (2).

Use of Cyanoacrylate Glue Casting for Stabilization of Periocular Skin Grafts and Flaps.

PubMed

Jackson, Colette M; Nguyen, Michelle; Mancini, Ronald

To examine a novel technique for periocular skin graft and flap stabilization using cyanoacrylate glue applied to the host bed around the perimeter of the graft or flap to create an immobile cast in the immediate postoperative period to promote successful graft take and stable anatomic position. Retrospective review was performed of a single surgeon's patients who underwent periocular skin graft or flap between August 1, 2011, and February 29, 2016, in which cyanoacrylate glue was applied postoperatively for graft stabilization. Data examined included indication for procedure, location and size of graft, postoperative complications, and length of follow up postoperatively. Of 164 cases reviewed, 9 cases were identified in which cyanoacrylate glue was used as the sole means of graft or flap stabilization. Indications for surgery included repair of cicatricial ectropion (3 cases) and repair of Mohs defect status after excision of basal or squamous cell carcinoma (6 cases). All cases involved reformation of the lower eyelid. Five cases employed full-thickness skin grafts and 4 cases employed adjacent tissue rearrangement. Size of defect repaired ranged from 8 mm to 35 mm when largest diameter was measured. Complications included mild residual ectropion or mild punctal ectropion in 2 patients who was asymptomatic and did not require further surgery. No cases were complicated by hematoma, infection, or graft necrosis. Cyanoacrylate glue can be used to successfully stabilize skin grafts and flaps in the immediate postoperative period.

Comparative trial of octyl-cyanoacrylate and silver sulfadiazine for the treatment of full-thickness skin wounds.

PubMed

Singer, A J; Berrutti, L; McClain, S A

1999-01-01

A prospective, randomized, blinded, controlled experimental trial was performed in pigs to compare the rates of reepithelialization of 126 full-thickness cutaneous 4-mm punches treated with an octyl-cyanoacrylate spray, silver sulfadiazine, or a dry gauze (controls). Full thickness biopsies were taken 7, 14, or 30 days later for histopathological evaluation of hematoxylin and eosin stained tissue sections by a dermatopathologist. The primary outcome measure was the proportion of wounds completely re-epithelialized at days 7 and 14. Secondary outcomes were the rates of infection, foreign body reactions, and the depth of any resulting cutaneous dells measured with a micrometer. Between-group comparisons were performed with ANOVA or Chi-square tests. Octyl-cyanoacrylate treated wounds re-epithelialized more slowly, as fewer wounds treated with octyl-cyanoacrylate were re-epithelialized at day 7 in comparison with silver sulfadiazine or control wounds (50% vs. 90% vs. 100%, p < 0.001). There were no infections or foreign body type reactions. Amounts of granulation tissue were similar among groups. Octyl-cyanoacrylate wounds were more depressed than silver sulfadiazine wounds at days 7 and 14 yet had similar histopathological characteristics at day 30. We conclude that treatment of small, full thickness cutaneous wounds with octyl-cyanoacrylate results in delayed re-epithelialization and dermal repair in comparison with silver sulfadiazine, yet it does not result in any foreign body-type reaction. However, by 30 days, histopathological wound characteristics were similar in all groups.

In situ precision electrospinning as an effective delivery technique for cyanoacrylate medical glue with high efficiency and low toxicity.

PubMed

Dong, R H; Qin, C C; Qiu, X; Yan, X; Yu, M; Cui, L; Zhou, Y; Zhang, H D; Jiang, X Y; Long, Y Z

2015-12-14

The side effects or toxicity of cyanoacrylate used in vivo have been argued since its first application in wound closure. We propose an airflow-assisted in situ precision electrospinning apparatus as an applicator and make a detailed comparison with traditional spraying via in vitro and in vivo experiments. This novel method can not only improve operational performance and safety by precisely depositing cyanoacrylate fibers onto a wound, but significantly reduce the dosage of cyanoacrylate by almost 80%. A white blood cell count, liver function test and histological analysis prove that the in situ precision electrospinning applicator produces a better postoperative outcome, e.g., minor hepatocyte injury, moderate inflammation and the significant ability for liver regeneration. This in situ precision electrospinning method may thus dramatically broaden both civilian and military applications of cyanoacrylates.

Preparation, in vitro and in vivo evaluation of polymeric nanoparticles based on hyaluronic acid-poly(butyl cyanoacrylate) and D-alpha-tocopheryl polyethylene glycol 1000 succinate for tumor-targeted delivery of morin hydrate

PubMed Central

Abbad, Sarra; Wang, Cheng; Waddad, Ayman Yahia; Lv, Huixia; Zhou, Jianping

2015-01-01

Herein, we describe the preparation of a targeted cellular delivery system for morin hydrate (MH), based on a low-molecular-weight hyaluronic acid-poly(butyl cyanoacrylate) (HA-PBCA) block copolymer. In order to enhance the therapeutic effect of MH, D-alpha-tocopheryl polyethylene glycol 1000 succinate (TPGS) was mixed with HA-PBCA during the preparation process. The MH-loaded HA-PBCA “plain” nanoparticle (MH-PNs) and HA-PBCA/TPGS “mixed” nanoparticles (MH-MNs) were concomitantly characterized in terms of loading efficiency, particle size, zeta potential, critical aggregation concentration, and morphology. The obtained MH-PNs and MH-MNs exhibited a spherical morphology with a negative zeta potential and a particle size less than 200 nm, favorable for drug targeting. Remarkably, the addition of TPGS resulted in about 1.6-fold increase in drug-loading. The in vitro cell viability experiment revealed that MH-MNs enhanced the cytotoxicity of MH in A549 cells compared with MH solution and MH-PNs. Furthermore, blank MNs containing TPGS exhibited selective cytotoxic effects against cancer cells without diminishing the viability of normal cells. In addition, the cellular uptake study indicated that MNs resulted in 2.28-fold higher cellular uptake than that of PNs, in A549 cells. The CD44 receptor competitive inhibition and the internalization pathway studies suggested that the internalization mechanism of the nanoparticles was mediated mainly by the CD44 receptors through a clathrin-dependent endocytic pathway. More importantly, MH-MNs exhibited a higher in vivo antitumor potency and induced more tumor cell apoptosis than did MH-PNs, following intravenous administration to S180 tumor-bearing mice. Overall, the results imply that the developed nanoparticles are promising vehicles for the targeted delivery of lipophilic anticancer drugs. PMID:25609946

Safety and efficacy of transcatheter embolization with Glubran®2 cyanoacrylate glue for acute arterial bleeding: a single-center experience with 104 patients.

PubMed

Abdulmalak, Gilles; Chevallier, Olivier; Falvo, Nicolas; Di Marco, Lucy; Bertaut, Aurélie; Moulin, Benjamin; Abi-Khalil, Célina; Gehin, Sophie; Charles, Pierre-Emmanuel; Latournerie, Marianne; Midulla, Marco; Loffroy, Romaric

2018-03-01

To assess the efficacy and the safety of Glubran ® 2 n-butyl cyanoacrylate metacryloxysulfolane (NBCA-MS) transcatheter arterial embolization (TAE) for acute arterial bleeding from varied anatomic sites and to evaluate the predictive factors associated with clinical success and 30-day mortality. A retrospective review of consecutive patients who underwent emergent NBCA-MS Glubran ® 2 TAE between July 2014 and August 2016 was conducted. Variables including age, sex, underlying malignancy, cardiovascular comorbidities, coagulation data, systolic blood pressure, and number of red blood cells units (RBC) transfused before TAE were collected. Clinical success, 30-day mortality, and complication rates were evaluated. Prognostic factors were evaluated by uni- and multivariate logistic regression analyses for clinical success, and by uni- and bivariate analyses after adjustment by bleeding sites for 30-day mortality. 104 patients underwent technically successful embolization with bleeding located in muscles (n = 34, 32.7%), digestive tract (n = 28, 26.9%), and viscera (n = 42, 40.4%). Clinical success rate was 76% (n = 79) and 30-day mortality rate was 21.2% (n = 22). Clinical failure was significantly associated with mortality (p < 0.0001). A number of RBC units transfused greater than or equal to 3 were associated with poorer clinical success (p = 0.025) and higher mortality (p = 0.03). Complications (n = 4, 3.8%) requiring surgery occurred only at puncture site. No ischemic complications requiring further invasive treatment occurred. Mean TAE treatment time was 4.55 min. NBCA-MS Glubran ® 2 TAE is a fast, effective, and safe treatment for acute arterial bleeding whatever the bleeding site.

Cometabolism of Methyl tertiary Butyl Ether and Gaseous n-Alkanes by Pseudomonas mendocina KR-1 Grown on C5 to C8 n-Alkanes

PubMed Central

Smith, Christy A.; O'Reilly, Kirk T.; Hyman, Michael R.

2003-01-01

Pseudomonas mendocina KR-1 grew well on toluene, n-alkanes (C5 to C8), and 1° alcohols (C2 to C8) but not on other aromatics, gaseous n-alkanes (C1 to C4), isoalkanes (C4 to C6), 2° alcohols (C3 to C8), methyl tertiary butyl ether (MTBE), or tertiary butyl alcohol (TBA). Cells grown under carbon-limited conditions on n-alkanes in the presence of MTBE (42 μmol) oxidized up to 94% of the added MTBE to TBA. Less than 3% of the added MTBE was oxidized to TBA when cells were grown on either 1° alcohols, toluene, or dextrose in the presence of MTBE. Concentrated n-pentane-grown cells oxidized MTBE to TBA without a lag phase and without generating tertiary butyl formate (TBF) as an intermediate. Neither TBF nor TBA was consumed by n-pentane-grown cells, while formaldehyde, the expected C1 product of MTBE dealkylation, was rapidly consumed. Similar Ks values for MTBE were observed for cells grown on C5 to C8 n-alkanes (12.95 ± 2.04 mM), suggesting that the same enzyme oxidizes MTBE in cells grown on each n-alkane. All growth-supporting n-alkanes (C5 to C8) inhibited MTBE oxidation by resting n-pentane-grown cells. Propane (Ki = 53 μM) and n-butane (Ki = 16 μM) also inhibited MTBE oxidation, and both gases were also consumed by cells during growth on n-pentane. Cultures grown on C5 to C8 n-alkanes also exhibited up to twofold-higher levels of growth in the presence of propane or n-butane, whereas no growth stimulation was observed with methane, ethane, MTBE, TBA, or formaldehyde. The results are discussed in terms of their impacts on our understanding of MTBE biodegradation and cometabolism. PMID:14660389

Strong, low-density nanocomposites by chemical vapor deposition and polymerization of cyanoacrylates on aminated silica aerogels.

PubMed

Boday, Dylan J; Stover, Robert J; Muriithi, Beatrice; Keller, Michael W; Wertz, Jason T; Defriend Obrey, Kimberly A; Loy, Douglas A

2009-07-01

Strong polymer-silica aerogel composites were prepared by chemical vapor deposition of cyanoacrylate monomers onto amine-modified aerogels. Amine-modified silica aerogels were prepared by copolymerizing small amounts of (aminopropyl)triethoxysilane with tetraethoxysilane. After silation of the aminated gels with hexamethyldisilazane, they were dried as aerogels using supercritical carbon dioxide processing. The resulting aerogels had only the amine groups as initiators for the cyanoacrylate polymerizations, resulting in cyanoacrylate macromolecules that were higher in molecular weight than those observed with unmodified silica and that were covalently attached to the silica surface. Starting with aminated silica aerogels that were 0.075 g/cm(3) density, composite aerogels were made with densities up to 0.220 g/cm(3) and up to 31 times stronger (flexural strength) than the precursor aerogel and about 2.3 times stronger than an unmodified silica aerogel of the same density.

[The influence of biological compatibility of the cyanoacrylate glue on regeneration of the cartilaginous tissue].

PubMed

Semenov, F V; Skibitskaya, N F

The objective of the present study was to evaluate the possibility of the application of the cyanoacrylate-based glue for the strengthening of the reconstructed elements of the middle ear and its influence on the regeneration of the cartilaginous tissue. We used the cartilaginous tissue from the auricles of the male California rabbits as a model. The cartilage was destroyed in a standard press. Half of the cartilage thus fragmented was implanted into the left auricle. The remaining part was mixed up with the cyanoacrylate glue and implanted into the right auricle of the same animal. The implanted material was used for the morphological study on day 10, within 1 and 2 months after the beginning of the experiment. The results of the study confirm the absence of the toxic action of the biologically compatible cyanoacrylate-based glue on the regeneration of the cartilaginous and connective tissues which suggests the possibility of its application for the surgical treatment of the diseases of the middle ear.

Metabolism and elimination of methyl, iso- and n-butyl paraben in human urine after single oral dosage.

PubMed

Moos, Rebecca K; Angerer, Jürgen; Dierkes, Georg; Brüning, Thomas; Koch, Holger M

2016-11-01

Parabens are used as preservatives in personal care and consumer products, food and pharmaceuticals. Their use is controversial because of possible endocrine disrupting properties. In this study, we investigated metabolism and urinary excretion of methyl paraben (MeP), iso-butyl paraben (iso-BuP) and n-butyl paraben (n-BuP) after oral dosage of deuterium-labeled analogs (10 mg). Each volunteer received one dosage per investigated paraben separately and at least 2 weeks apart. Consecutive urine samples were collected over 48 h. In addition to the parent parabens (free and conjugated) which are already used as biomarkers of internal exposure and the known but non-specific metabolites, p-hydroxybenzoic acid (PHBA) and p-hydroxyhippuric acid (PHHA), we identified new, oxidized metabolites with hydroxy groups on the alkyl side chain (3OH-n-BuP and 2OH-iso-BuP) and species with oxidative modifications on the aromatic ring. MeP represented 17.4 % of the dose excreted in urine, while iso-BuP represented only 6.8 % and n-BuP 5.6 %. Additionally, for iso-BuP, about 16 % was excreted as 2OH-iso-BuP and for n-BuP about 6 % as 3OH-n-BuP. Less than 1 % was excreted as ring-hydroxylated metabolites. In all cases, PHHA was identified as the major but non-specific metabolite (57.2-63.8 %). PHBA represented 3.0-7.2 %. For all parabens, the majority of the oral dose captured by the above metabolites was excreted in the first 24 h (80.5-85.3 %). Complementary to the parent parabens excreted in urine, alkyl-chain-oxidized metabolites of the butyl parabens are introduced as valuable and contamination-free biomarkers of exposure.

ATOM TRANSFER RADICAL POLYMERIZATION OF N-BUTYL METHACRYLATE IN AQUEOUS DISPERSED SYSTEMS: A MINIEMULSION APPROACH. (R826735)

EPA Science Inventory

Ultrasonication was applied in combination with a hydrophobe for the copper-mediated atom transfer radical polymerization of n-butyl methacrylate in an aqueous dispersed system. A controlled polymerization was successfully achieved, as demonstrated by a linear correlation between...

Ground-State Distortion in N-Acyl-tert-butyl-carbamates (Boc) and N-Acyl-tosylamides (Ts): Twisted Amides of Relevance to Amide N-C Cross-Coupling.

PubMed

Szostak, Roman; Shi, Shicheng; Meng, Guangrong; Lalancette, Roger; Szostak, Michal

2016-09-02

Amide N-C(O) bonds are generally unreactive in cross-coupling reactions employing low-valent transition metals due to nN → π*C═O resonance. Herein we demonstrate that N-acyl-tert-butyl-carbamates (Boc) and N-acyl-tosylamides (Ts), two classes of acyclic amides that have recently enabled the development of elusive amide bond N-C cross-coupling reactions with organometallic reagents, are intrinsically twisted around the N-C(O) axis. The data have important implications for the design of new amide cross-coupling reactions with the N-C(O) amide bond cleavage as a key step.

[n-Butyl Alcohol-soluble Chemical Constituents of Psidium guajava Leaves].

PubMed

Chen, Gang; Wan, Kai-hua; Fu, Hui-zheng; Yan, Qing-wei

2015-03-01

To study the chemical constituents of the leaves of Psidium guajava. The chemical constituents were isolated by column chromatography on silica gel, Sephadex LH-20 and MPLC. Their chemical structures were elucidated on the basis of special analysis. Seven compounds were isolated from n-butyl alcohol fraction, whose structures were elucidated as morin-3-O-α-L-arabopyranoside (1), morin-3-O-α-L-iyxopyranoside (2), 2,6-dihydroxy-4-O-β-D-glucopyranosyl-benzophenone (3), casuarictin (4),2,6-dihydroxy-3,5-dimethyl-4-O-(6"-O-galloyl-β-D-glucopyranosyl)-benzophenone(5), globulusin A(6), and kaempferol-3-O-β-D-(6"-galloyl) galactopyranoside (7). Compounds 3 and 5 ~ 7 are isolated from this plant for the first time.

Transcatheter embolization of pancreatic arteriovenous malformation associated with recurrent acute pancreatitis

PubMed Central

Rajesh, S; Mukund, Amar; Bhatia, Vikram; Arora, Ankur

2016-01-01

Pancreatic arteriovenous malformation (PAVM) is extremely rare; even rarer is its association with pancreatitis. The authors report a case of PAVM causing recurrent episodes of acute pancreatitis in a 46-year-old male. Patient refused surgery and was treated with transcatheter arterial embolization using liquid embolic agent (mixture of n-butyl-2-cyanoacrylate glue and lipiodol), which resulted in a significant decrease in the size of the PAVM. PMID:27081231

Microemulsions containing lecithin and sugar-based surfactants: nanoparticle templates for delivery of proteins and peptides.

PubMed

Graf, Anja; Ablinger, Elisabeth; Peters, Silvia; Zimmer, Andreas; Hook, Sarah; Rades, Thomas

2008-02-28

Two pseudo-ternary systems comprising isopropyl myristate, soybean lecithin, water, ethanol and either decyl glucoside (DG) or capryl-caprylyl glucoside (CCG) as surfactant were investigated for their potential to form microemulsion templates to produce nanoparticles as drug delivery vehicles for proteins and peptides. All microemulsion and nanoparticle compounds used were pharmaceutically acceptable and biocompatible. Phase diagrams were established and characterized using polarizing light microscopy, viscosity, conductivity, electron microscopy, differential scanning calorimetry and self-diffusion NMR. An area in the phase diagrams containing optically isotropic, monophasic systems was designated as the microemulsion region and systems therein identified as solution-type microemulsions. Poly(alkylcyanoacrylate) nanoparticles prepared by interfacial polymerisation from selected microemulsions ranged from 145 to 660nm in size with a unimodal size distribution depending on the type of monomer (ethyl (2) or butyl (2) cyanoacrylate) and microemulsion template. Generally larger nanoparticles were formed by butyl (2) cyanoacrylate. Insulin was added as a model protein and did not alter the physicochemical behaviour of the microemulsions or the morphology of the nanoparticles. However, insulin-loaded nanoparticles in the CCG containing system decreased in size when using butyl (2) cyanoacrylate. This study shows that microemulsions containing sugar-based surfactants are suitable formulation templates for the formation of nanoparticles to deliver peptides.

Bis(O-n-butyl dithio­carbonato-κ2 S,S′)bis­(pyridine-κN)manganese(II)

PubMed Central

Alam, Naveed; Ehsan, Muhammad Ali; Zeller, Matthias; Mazhar, Muhammad; Arifin, Zainudin

2011-01-01

The structure of the title manganese complex, [Mn(C5H9OS2)2(C5H5N)2] or [Mn(S2CO-n-Bu)2(C5H5N)2], consists of discrete monomeric entities with Mn2+ ions located on centres of inversion. The metal atom is coordinated by a six-coordinate trans-N2S4 donor set with the pyridyl N atoms located in the apical positions. The observed slight deviations from octa­hedral geometry are caused by the bite angle of the bidentate κ2-S2CO-n-Bu ligands [69.48 (1)°]. The O(CH2)3(CH3) chains of the O-n-butyl dithio­carbonate units are disordered over two sets of sites with an occupancy ratio of 0.589 (2):0.411 (2). PMID:22090847

Urease Inhibition in the Presence of N-(n-Butyl)thiophosphoric Triamide, a Suicide Substrate: Structure and Kinetics.

PubMed

Mazzei, Luca; Cianci, Michele; Contaldo, Umberto; Musiani, Francesco; Ciurli, Stefano

2017-10-10

The nickel-dependent enzyme urease is a virulence factor for a large number of pathogenic and antibiotic-resistant bacteria, as well as a negative factor for the efficiency of soil nitrogen fertilization for crop production. The use of urease inhibitors to offset these effects requires knowledge, at a molecular level, of their mode of action. The 1.28 Å resolution structure of the enzyme-inhibitor complex obtained upon incubation of Sporosarcina pasteurii urease with N-(n-butyl)thiophosphoric triamide (NBPT), a molecule largely utilized in agriculture, reveals the presence of the monoamidothiophosphoric acid (MATP) moiety, obtained upon enzymatic hydrolysis of the diamide derivative of NBPT (NBPD) to yield n-butyl amine. MATP is bound to the two Ni(II) ions in the active site of urease using a μ 2 -bridging O atom and terminally bound O and NH 2 groups, with the S atom of the thiophosphoric amide pointing away from the metal center. The mobile flap modulating the size of the active site cavity is found in the closed conformation. Docking calculations suggest that the interaction between urease in the open flap conformation and NBPD involves a role for the conserved αArg339 in capturing and orienting the inhibitor prior to flap closure. Calorimetric and spectrophotometric determinations of the kinetic parameters of this inhibition indicate the occurrence of a reversible slow inhibition mode of action, characterized, for both bacterial and plant ureases, by a very small value of the dissociation constant of the urease-MATP complex. No need to convert NBPT to its oxo derivative NBPTO, as previously proposed, is necessary for urease inhibition.

Dynamics of glass-forming di-n-butyl phthalate as studied by NMR.

PubMed

Szcześniak, E; Głowinkowski, S; Suchański, W; Jurga, S

1997-04-01

Spin-lattice relaxation times T1 and nuclear Overhauser effect (NOE) enhancement factors for the individual ring carbons in di-n-butyl phthalate (DBF) show that the reorientational correlation function corresponding to the global dynamics in supercooled liquid can be described by a Davidson-Cole distribution. Measurements of proton spin-lattice relaxation times T1 and T1p, as well as 1H NMR spectra at temperatures below the glass transition temperature, Tg, reveal that the same distribution holds also for description of local dynamics in glassy DBF. The activation parameters of the motions detected are derived.

PHARMACOKINETICS OF N-BUTYL ACETATE AND ITS METABOLITES IN MALE SPRAGUE DAWLEY RATS AFTER INTRAVENOUS ADMINISTRATION

EPA Science Inventory

FAMILY APPROACH PBPK MODELING OF N-BUTYL ACETATE AND ITS METABOLITES IN MALE RATS
P.J. Deisinger1, J.G. Teeguarden2, H.A. Barton3, J.C. English1, W.D. Faber4, T.R. Tyler5, M.I. Banton6, M.E. Andersen7. 1Health & Environ. Laboratories., Eastman Kodak Company, Rochester, NY, USA...

A protocol for the production of gliadin-cyanoacrylate nanoparticles for hydrophilic coating

USDA-ARS?s Scientific Manuscript database

This article presents a protocol for the production of protein-based nanoparticles that change the hydrophobic surface to hydrophilic by a simple spray coating. These nanoparticles are produced by the polymerization reaction of alkyl cyanoacrylate on the surface of cereal protein (gliadin) molecules...

Evaluation of a cyanoacrylate dressing to manage peristomal skin alterations under ostomy skin barrier wafers.

PubMed

Milne, Catherine T; Saucier, Darlene; Trevellini, Chenel; Smith, Juliet

2011-01-01

Peristomal skin alterations under ostomy barrier wafers are a commonly reported problem. While a number of interventions to manage this issue have been reported, the use of a topically applied cyanoacrylate has received little attention. This case series describes the use of a topical cyanoacrylate for the management of peristomal skin alterations in persons living with an ostomy. Using a convenience sample, the topical cyanoacrylate dressing was applied to 11 patients with peristomal skin disruption under ostomy wafers in acute care and outpatient settings. The causes of barrier function interruption were also addressed to enhance outcomes. Patients were assessed for wound discomfort using a Likert Scale, time to healing, and number of appliance changes. Patient satisfaction was also examined. Average reported discomfort levels were 9.5 out of 10 at the initial peristomal irritation assessment visit decreased to 3.5 at the first wafer change and were absent by the second wafer change. Wafers had increasing wear time between changes in both settings with acute care patients responding faster. Epidermal resurfacing occurred within 10.2 days in outpatients and within 7 days in acute care patients. Because of the skin sealant action of this dressing, immediate adherence of the wafer was reported at all pouch changes.

Comparison of the Effect of Addition of Cyanoacrylate, Epoxy Resin, and Gum Arabic on Surface Hardness of Die Stone.

PubMed

Tripathi, Arvind; Gupta, Ashutosh; Bagchi, Soumyojeet; Mishra, Lallan; Gautam, Abhina; Madhok, Riti

2016-04-01

To observe the effects of incorporating cyanoacrylate, epoxy resins, and gum arabic on the abrasion resistance of type IV gypsum die materials. Forty specimens were prepared and divided into four groups (10 specimens in each group), namely group A (control), group B (die stone mixed with cyanoacrylate), group C (die stone mixed with epoxy resin), group D (die stone mixed with gum arabic). All the specimens were subjected to abrasion testing, wear volume analysis, Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscope (SEM) analysis. Abrasion testing showed maximum wear in the control group and minimum wear in the gum arabic group. Intergroup differences were statistically significant (p < 0.001). The largest mean difference was between control and gum arabic. The lowest was between cyanoacrylate and the control group. The mean wear volume was lowest in the gum arabic group (4.23 mm(3) ) and highest in the control group (6.78 mm(3) ). The FT-IR graphs of the gum arabic models showed the presence of CH2 , which is responsible for its binding activity. SEM revealed that the irregular particles of gum arabic display an interlocking arrangement. This jigsaw puzzle pattern results in stronger physical bond formation. Observations from this study showed that the addition of gum arabic increases resistance to abrasion in type IV gypsum. Cyanoacrylates are good adhesives as well, but a major drawback is that they have very low resistance to chemical action with water and physical actions such as sunlight. Epoxy resins are powerful adhesives, but they attain their full efficiency when cured with heat. Cyanoacrylate and epoxy resin displayed poor physical bonding, primarily because of inhomogeneity. © 2015 by the American College of Prosthodontists.

Evaluation of Lumicyano™ cyanoacrylate fuming process for the development of latent fingermarks on plastic carrier bags by means of a pseudo operational comparative trial.

PubMed

Farrugia, Kevin J; Deacon, Paul; Fraser, Joanna

2014-03-01

There are a number of studies discussing recent developments of a one-step fluorescent cyanoacrylate process. This study is a pseudo operational trial to compare an example of a one-step fluorescent cyanoacrylate product, Lumicyano™, with the two recommended techniques for plastic carrier bags; cyanoacrylate fuming followed by basic yellow 40 (BY40) dyeing and powder suspensions. 100 plastic carrier bags were collected from the place of work and the items were treated as found without any additional fingermark deposition. The bags were split into three and after treatment with the three techniques a comparable number of fingermarks were detected by each technique (average of 300 fingermarks). The items treated with Lumicyano™ were sequentially processed with BY40 and an additional 43 new fingermarks were detected. Lumicyano™ appears to be a suitable technique for the development of fingermarks on plastic carrier bags and it can help save lab space and time as it does not require dyeing or drying procedures. Furthermore, contrary to other one-step cyanoacrylate products, existing cyanoacrylate cabinets do not require any modification for the treatment of articles with Lumicyano™. To date, there is little peer reviewed articles in the literature on trials related to Lumicyano™ and this study aims to contribute to fill this gap. © 2013.

Di-tert-butyl-chlorido(N,N-dibenzyl-dithio-carbamato)tin(IV).

PubMed

Abdul Muthalib, Amirah Faizah; Baba, Ibrahim; Mohamed Tahir, Mohamed Ibrahim; Tiekink, Edward R T

2011-02-26

The Sn(IV) atom in the title diorganotin dithio-carbamate, [Sn(C(4)H(9))(2)(C(15)H(14)NS(2))Cl], is penta-coordinated by an asymmetrically coordinating dithio-carbamate ligand, a Cl atom and two C atoms of the Sn-bound tert-butyl groups. The resulting C(2)ClS(2) donor set defines a coordination geometry inter-mediate between square pyramidal and trigonal bipyramidal with a slight tendency towards the former.

Enhanced cometabolic degradation of methyl tert-butyl ether by a Pseudomonas sp. strain grown on n-pentane

NASA Astrophysics Data System (ADS)

Li, S. S.; Wang, S.; Yan, W.

2016-08-01

When methyl tert-butyl ether (MTBE) is added as oxygenates it increases the octane number and decreases the release of nitric oxide from the incomplete combustion of reformulated gasoline. The extensive use of MTBE allowed it to be detectable as a pollutant in both ground-level and underground water worldwide. The present study focuses on the isolation and characterization of MTB-degrading microorganisms by cometabolism based on the results of growth on different carbon sources. It also focuses on the kinetic analysis and the continuous degradation of MTBE. A bacterial strain WL1 that can grow on both n-alkanes (C5-C8) and aromatics was isolated and named Pseudomonas sp. WL1 according to the 16S rDNA sequencing analysis. Strain WL1 could cometabolically degrade MTBE in the presence of n-alkanes with a desirable degradation rate. Diverse n-alkanes with different lengths of carbon chains showed significant influence on the degradation rate of MTBE and accumulation of tert-butyl alcohol (TBA). When strain WL1 cometabolically degraded MTBE in the presence of n-pentane, higher MTBE-degrading rate and lower TBA-accumulation were observed (Vmax = 38.1 nmol/min/mgprotei, Ks = 6.8 mmol/L). In the continuous degrading experiment, the removal efficiency of MTBE by Pseudomonas sp. WL1 did not show any obvious decrease after five subsequent additions.

Quantifying Dimer and Trimer Formation by Tri- n -butyl Phosphates in n -Dodecane: Molecular Dynamics Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vo, Quynh N.; Dang, Liem X.; Nilsson, Mikael

2016-07-21

Tri-n-butyl phosphate (TBP), a representative of neutral organophosphorous ligands, is an important extractant used in solvent extraction process for the recovery of uranium and plutonium from spent nuclear fuel. Microscopic pictures of TBP isomerism and its behavior in n-dodecane diluent were investigated utilizing MD simulations with previously optimized force field parameters for TBP and n-dodecane. Potential Mean Force (PMF) calculations on a single TBP molecule show seven probable TBP isomers. Radial Distribution Functions (RDF) of TBP suggests the existence of TBP trimers at high TBP concentrations in addition to dimers. 2D PMF calculations were performed to determine the angle andmore » distance criteria for TBP trimers. The dimerization and trimerization constants of TBP in n-dodecane were obtained and match our own experimental values using FTIR technique. The new insights into the conformational behaviors of TBP molecule as a monomer and as part of an aggregate could greatly aid the understanding of the complexation between TBP and metal ions in solvent extraction system. The U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences funded the work performed by LXD.« less

A comparative study of the effects of 4-META/MMA-TBB resin and cyanoacrylate on wound healing of skin defects.

PubMed

Kidokoro, Ryo; Nakajima, Kei; Kobayashi, Fumitaka; Takeda, Yukihiro; Matsuzaka, Kenichi; Katakura, Akira; Inoue, Takashi

2016-01-01

The purpose of this study was to investigate the healing process of wounded skin following the application of cyanoacrylate or a 4-(2-methacryloxyethyl) trimellitic anhydride/methyl methacrylate-tributylborane resin (4-META resin). Those materials were applied to skin wound areas in rats, and the regenerating tissues were biopsied and examined at days 1, 3, 5, 7, and 14. Paraffin-embedded specimens were sectioned and stained with hematoxylin and eosin or with Azan-Mallory stain. Sections were also immunohistochemically stained with Pan-cytokeratin and CD68 antibodies. In cyanoacrylate-treated wounds, CD68-positive cells were observed in the connective tissue and their number increased up to day 5. The wound surface was completely covered by epithelial tissue at day 14. In 4-META resin-treated wounds, CD68-positive cells appeared in the soft-tissue hybrid layer (STHL) and epithelial tissue had migrated under the STHL by day 5. The wound surface was completely covered by epithelial tissue at day 7. CD68-positive cells were distributed over the entire area of the cyanoacrylate-treated wounds, but accumulated under the STHL in the 4-META resin-treated wounds. In conclusion, the results suggest that covering skin defects with a 4-META resin is an effective strategy to promote wound healing compared to cyanoacrylate. © 2015 Wiley Periodicals, Inc.

Gas embolotherapy: Bubble evolution in acoustic droplet vaporization and design of a benchtop microvascular model

NASA Astrophysics Data System (ADS)

Wong, Zheng Zheng

This work was motivated by an ongoing development of a potential embolotherapy technique to occlude blood flow to tumors using gas bubbles selectively formed by in vivo acoustic droplet vaporization (ADV) of liquid perfluorocarbon droplets. Mechanisms behind the ADV, transport and lodging of emboli need to be understood before gas embolotherapy can translate to the clinic. Evolution of a bubble from acoustic droplet vaporization in a rigid tube, under physiological and room temperature conditions, was observed via ultra-high speed imaging. Effective radii and radial expansion ratios were obtained by processing the images using Image] software. At physiological temperature, a radial expansion ratio of 5.05 was attained, consistent with theoretical prediction. The initial radial growth rate was linear, after which the growth rate increased proportionally with square root of time. Nondimensionalization revealed that the subsequent growth rate also varied inversely with square root of initial radius. Eventually growth became asymptotic. No collapse was observed. A theoretical model derived from a modified Bernoulli equation, and a computational model by Ye & Bull (2004), were compared respectively with experimental results. Initial growth rates were predicted correctly by both models. Experimental results showed heavy damping of growth rate as the bubble grew towards the wall, whereas both models predicted an overshoot in growth followed by multiple oscillations. The theoretical model broke down near the wall; the computational model gave a reasonable bubble shape near the wall but would require correct initial pressure values to be accurate. At room temperature, the expansion ratio shot to 1.43 initially and oscillated down to 1.11, far below the theoretical prediction. Failure of the bubble to expand fully could be due to unconsumed or condensed liquid perfluorocarbon. A new fabrication method via non-lithographic means was devised to make a circular

Management of nontraumatic corneal perforation with tectonic drape patch and cyanoacrylate glue.

PubMed

Khalifa, Yousuf M; Bailony, M Rami; Bloomer, Michele M; Killingsworth, Daniel; Jeng, Bennie H

2010-10-01

To report a case of nontraumatic corneal perforation managed with a tectonic drape patch. Interventional case report. A 60-year-old patient with a corneal scar in his left eye likely secondary to herpes simplex virus interstitial keratitis underwent laser peripheral iridotomy for narrow angles. He developed progressive thinning of the cornea overlying the scar that led to a descemetocele and then ultimately a 1.2- × 1.7-mm perforation. Intraoperatively, several attempts were made to seal the perforation with cyanoacrylate glue, but the wound continued to leak. Sterile plastic drape that was on the surgical field was fashioned into a 2-mm-diameter patch, and the peripheral edge of the tectonic drape patch was glued over the perforation, successfully sealing the cornea. One week later, the drape patch was intact without leak, and a penetrating keratoplasty was carried out without complication. Tectonic drape patch technique for nontraumatic corneal perforations in which there is tissue loss is a viable temporizing option when cyanoacrylate glue alone fails and when there is no corneal tissue or amniotic membrane available to close the wound.

Delayed onset pulmonary glue emboli in a ventilated patient: a rare complication following endoscopic cyanoacrylate injection for gastric variceal haemorrhage

PubMed Central

Chew, Joyce Ruo Yi; Balan, Anu; Griffiths, William; Herre, Jurgen

2014-01-01

Cyanoacrylate injection is a recognised endoscopic treatment option for variceal haemorrhage. We describe a 34-year old man with hepatitis B cirrhosis who presented to the hospital with upper gastrointestinal haemorrhage from gastric and oesophageal varices. Haemostasis was achieved via cyanoacrylate injection sclerotherapy and banding. Ten days later, the patient developed acute hypoxia and fever. His chest radiograph showed wide-spread pulmonary shadowing. A non-contrast CT scan confirmed multiple emboli of injected glue material from the varix with parenchymal changes either suggesting acute lung injury or pulmonary oedema. He gradually recovered with supportive treatment and was discharged home. On follow-up, he remained asymptomatic from a chest perspective. This case report discusses the rare complication of pulmonary embolisation of cyanoacrylate glue from variceal injection sites and the diagnostic dilemmas involved. Emphasis is placed on the importance of maintaining high index of clinical suspicion when assessing patients with possible procedure related complications. PMID:25320260

Glue Embolization of a Blunt Traumatic Hepatic Arteriovenous Fistula under Inflow and Outflow Control.

PubMed

Mine, Takahiko; Murata, Satoru; Yasui, Daisuke; Yokota, Hiroyuki; Tajima, Hiroyuki; Kumita, Shin-ichiro

2016-01-01

We report on a rare case of blunt traumatic hepatic arteriovenous fistula arising from a pseudoaneurysm in a 35-year-old woman. Transarterial embolization was performed with n-butyl-2-cyanoacrylate, under inflow control with loose coil packing within the pseudoaneurysm and outflow control by balloon occlusion of the hepatic vein. A promising therapeutic outcome was achieved without any serious adverse events. Thus, the combination of these techniques to control inflow and outflow was successfully used to treat this rare hepatic vascular injury.

(N-Benzyl-N-ethyl-dithio-carbamato)di-tert-butyl-chloridotin(IV).

PubMed

Abdul Muthalib, Amirah Faizah; Baba, Ibrahim; Mohamed Tahir, Mohamed Ibrahim; Tiekink, Edward R T

2011-02-26

The Sn(IV) atom in the title diorganotin dithio-carbamate, [Sn(C(4)H(9))(2)Cl(C(10)H(12)NS(2))], is penta-coordinated by an asymmetrically coordinating dithio-carbamate ligand, a Cl and two C atoms of the Sn-bound tert-butyl groups. The resulting C(2)ClS(2) donor set defines a coordination geometry inter-mediate between square pyramidal and trigonal bipyramidal with a slight tendency towards the former. In the crystal structure, C-H⋯π contacts link centrosymmetrically related mol-ecules into dimeric aggregates.

Fractionation of Poly(butyl methacrylate) by Molecular Topology Using Multidetector Thermal Field-Flow Fractionation.

PubMed

Greyling, Guilaume; Pasch, Harald

2015-12-01

Thermal field-flow fractionation (ThFFF) is an interesting alternative to column-based fractionation being able to address different molecular parameters including size and composition. Until today it has not been shown to be able to fractionate polymers of similar molar masses and chemical compositions by molecular topology. The present study demonstrates that poly(butyl methacrylates) with identical molar masses can be fractionated by ThFFF according to the topology of the butyl group. The influence of the solvent polarity on the thermal diffusion behavior of these polymers is presented and it is shown to have a significant influence on the fractionation of poly(n-butyl methacrylate) and poly(t-butyl methacrylate). Fractionation improves with increasing solvent polarity and solvent polarity may have a greater influence on fractionation than solvent viscosity. It is found that the thermal diffusion coefficient, D(T), as well as the hydrodynamic diameter, D(h), exhibit increasing trends with increasing solvent polarity. The solvent quality has a significant influence on the fractionation. It is found that cyclohexane, being a theta solvent for poly(t-butyl methacrylate) but not for poly(n-butyl methacrylate), significantly improves the fractionation of the samples by decreasing the diffusion rate of the former but not the latter. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Tetra-μ3-iodido-tetra­kis­[(tri-n-butyl­phosphane-κP)copper(I)

PubMed Central

Klenk, Simon; Frey, Wolfgang; Bubrin, Martina; Laschat, Sabine

2014-01-01

The title complex, [Cu4I4(C12H27P)4], crystallizes with six mol­ecules in the unit cell and with three independent one-third mol­ecule fragments, completed by application of the relevant symmetry operators, in the asymmetric unit. The tetranuclear copper core shows a tetrahedral geometry (site symmetry 3..). The I atoms also form a tetra­hedron, with I⋯I distances of 4.471 (1) Å. Both tetra­hedra show an orientation similar to that of a pair of self-dual platonic bodies. The edges of the I-tetra­hedral structure are capped to the face centers of the Cu-tetra­hedron and vice versa. The Cuface⋯I distances are 2.18 Å (averaged) and the Iface⋯Cu distances are 0.78 Å (averaged). As a geometric consequence of these properties there are eight distorted trigonal–bipyramidal polyhedra evident, wherein each trigonal face builds up the equatorial site and the opposite Cu⋯I positions form the axial site. As expected, the n-butyl moieties are highly flexible, resulting in large elongations of their anisotropic displacement parameters. Some C atoms of the n-butyl groups were needed to fix alternative discrete disordered positions. PMID:24826086

N-n-butyl haloperidol iodide protects cardiomyocytes against hypoxia/reoxygenation injury by inhibiting autophagy.

PubMed

Wang, Bin; Zhong, Shuping; Zheng, Fuchun; Zhang, Yanmei; Gao, Fenfei; Chen, Yicun; Lu, Binger; Xu, Han; Shi, Ganggang

2015-09-22

N-n-butyl haloperidol iodide (F2), a novel compound derived from haloperidol, protects against the damaging effects of ischemia/reperfusion (I/R) injury in vitro and in vivo. In this study, we hypothesized the myocardial protection of F2 on cardiomyocyte hypoxia/reoxygenation (H/R) injury is mediated by inhibiting autophagy in H9c2 cells. The degree of autophagy by treatment with F2 exposed to H/R in H9c2 cell was characterized by monodansylcadaverine, transmission electron microscopy, and expression of autophagy marker protein LC3. Our results indicated that treatment with F2 inhibited autophagy in H9c2 cells exposed to H/R. 3-methyladenine, an inhibitor of autophagy, suppressed H/R-induced autophagy, and decreased apoptosis, whereas rapamycin, a classical autophagy sensitizer, increased autophagy and apoptosis. Mechanistically, macrophage migration inhibitory factor (MIF) was inhibited by F2 treatment after H/R. Accordingly, small interfering RNA (siRNA)-mediated MIF knockdown decreased H/R-induced autophagy. In summary, F2 protects cardiomyocytes during H/R injury through suppressing autophagy activation. Our results provide a new mechanistic insight into a functional role of F2 against H/R-induced cardiomyocyte injury and death.

An ion-pair principle for enantioseparations of basic analytes by nonaqueous capillary electrophoresis using the di-n-butyl L-tartrate-boric acid complex as chiral selector.

PubMed

Wang, Li-Juan; Liu, Xiu-Feng; Lu, Qie-Nan; Yang, Geng-Liang; Chen, Xing-Guo

2013-04-05

A chiral recognition mechanism of ion-pair principle has been proposed in this study. It rationalized the enantioseparations of some basic analytes using the complex of di-n-butyl l-tartrate and boric acid as the chiral selector in methanolic background electrolytes (BGEs) by nonaqueous capillary electrophoresis (NACE). An approach of mass spectrometer (MS) directly confirmed that triethylamine promoted the formation of negatively charged di-n-butyl l-tartrate-boric acid complex chiral counter ion with a complex ratio of 2:1. And the negatively charged counter ion was the real chiral selector in the ion-pair principle enantioseparations. It was assumed that triethylamine should play its role by adjusting the apparent acidity (pH*) of the running buffer to a higher value. Consequently, the effects of various basic electrolytes including inorganic and organic ones on the enantioseparations in NACE were investigated. The results showed that most of the basic electrolytes tested were favorable for the enantioseparations of basic analytes using di-n-butyl l-tartrate-boric acid complex as the chiral ion-pair selector. Copyright © 2013 Elsevier B.V. All rights reserved.

Embolization as the treatment for a life-threatening mandibular arteriovenous malformation.

PubMed

Loureiro, Caio Cesar de Souza; Falchet, Paula Cristina Felix; Gavranich, João; Lobo Leandro, Luiz Fernando

2010-03-01

Mandibular arteriovenous malformation is a severe vascular pathological condition that may lead to life-threatening hemorrhages. In child and teenaged patients, a conservative treatment is preferred to avoid profuse blood loss and/or mutilating alterations in the still-growing patients' face. The aim of this article was to present a case of an 11-year-old boy with an arteriovenous malformation involving the left mandible and treated by means of endovascular embolization with direct lesional delivery of N-butyl-cyanoacrylate glue through transfemoral catheterization.

Nucleotide excision repair modulates the cytotoxic and mutagenic effects of N-n-butyl-N-nitrosourea in cultured mammalian cells as well as in mouse splenocytes in vivo.

PubMed

Bol, S A; van Steeg, H; van Oostrom, C T; Tates, A D; Vrieling, H; de Groot, A J; Mullenders, L H; van Zeeland, A A; Jansen, J G

1999-05-01

The butylating agent N-n-butyl-N-nitrosourea (BNU) was employed to study the role of nucleotide excision repair (NER) in protecting mammalian cells against the genotoxic effects of monofunctional alkylating agents. The direct acting agent BNU was found to be mutagenic in normal and XPA mouse splenocytes after a single i.p. treatment in vivo. After 25 and 35 mg/kg BNU, but not after 75 mg/ kg, 2- to 3-fold more hprt mutants were detected in splenocytes from XPA mice than from normal mice. Using O6-alkylguanine-DNA alkyltransferase (AGT)-deficient hamster cells, it was found that NER-deficient CHO UV5 cells carrying a mutation in the ERCC-2 gene were 40% more mutable towards lesions induced by BNU when compared with parental NER-proficient CHO AA8 cells. UV5 cells were 1.4-fold more sensitive to the cytotoxic effects of BNU compared with AA8 cells. To investigate whether this increased sensitivity of NER-deficient cells is modulated by AGT activity, cell survival studies were performed in human and mouse primary fibroblasts as well. BNU was 2.7-fold more toxic for mouse XPA fibroblasts compared with normal mouse fibroblasts. Comparable results were found for human fibroblasts. Taken together these data indicate that the role of NER in protecting rodent cells against the mutagenic and cytotoxic effects of the alkylating agent BNU depends on AGT.

Butylate

Integrated Risk Information System (IRIS)

Butylate ; CASRN 2008 - 41 - 5 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Effects

Herbicidal cyanoacrylates with antimicrotubule mechanism of action.

PubMed

Tresch, Stefan; Plath, Peter; Grossmann, Klaus

2005-11-01

The herbicidal mode of action of the new synthetic cyanoacrylates ethyl (2Z)-3-amino-2-cyano-4-ethylhex-2-enoate (CA1) and its isopropyl ester derivative CA2 was investigated. For initial characterization, a series of bioassays was used indicating a mode of action similar to that of mitotic disrupter herbicides such as the dinitroaniline pendimethalin. Cytochemical fluorescence studies including monoclonal antibodies against polymerized and depolymerized tubulin and a cellulose-binding domain of a bacterial cellulase conjugated to a fluorescent dye were applied to elucidate effects on cell division processes including mitosis and microtubule and cell wall formation in maize roots. When seedlings were root treated with 10 microM of CA1 or CA2, cell division activity in meristematic root tip cells decreased within 4 h. The chromosomes proceeded to a condensed state of prometaphase, but were unable to progress further in the mitotic cycle. The compounds caused a complete loss of microtubular structures, including preprophase, spindle, phragmoplast and cortical microtubules. Concomitantly, in the cytoplasm, an increase in labelling of free tubulin was observed. This suggests that the herbicides disrupt polymerization and microtubule stability, whereas tubulin synthesis or degradation appeared not to be affected. In addition, cellulose labelling in cell walls of root tip cells was not influenced. The effects of CA1 and CA2 were comparable with those caused by pendimethalin. In transgenic Arabidopsis plants expressing a green fluorescent protein-microtubule-associated protein4 fusion protein, labelled arrays of cortical microtubules in living epidermal cells of hypocotyls collapsed within 160 min after exposure to 10 microM CA1 or pendimethalin. Moreover, a dinitroaniline-resistant biotype of goosegrass (Eleusine indica (L) Gaertn) with a point mutation in alpha-tubulin showed cross-resistance against CA1 and CA2. The results strongly indicate that the cyanoacrylates are

Use of a skin adhesive (octyl-2-cyanoacrylate) and the optimum reinforcing combination for suturing wounds.

PubMed

Chigira, Miho; Akimoto, Masataka

2005-01-01

The adhesion strength of a skin adhesive, octyl-2-cyanoacrylate (Dermabond), was measured under various conditions using porcine skin. The combined use of a skin adhesive and a skin closure tape (n = 5) was significantly stronger than a single application of skin adhesive (n = 5) (p < 0.01). We have tentatively named the wound closure in which a skin adhesive and reinforcement material were combined the Reinforcing Combination Method. To obtain optimum conditions, further studies were done for sequence of application, type of reinforcement material, a number of layers, and width of the suture. The optimum condition for the reinforcement combination was established by applying one layer of skin adhesive over a skin closure tape, over one layer of skin adhesive, with a suture width of 4 cm. This reinforcement combination might be useful in clinical practice.

IRIS Toxicological Review of Ethylene Glycol Mono Butyl ...

EPA Pesticide Factsheets

EPA has finalized the Toxicological Review of Ethylene Glycol Mono Butyl Ether: in support of the Integrated Risk Information System (IRIS). Now final, this assessment may be used by EPA’s program and regional offices to inform decisions to protect human health. N/A

Di-n-butyl Phthalate (DNBP) and Diisobutyl Phthalate (DiBP) Metabolism in a Human Volunteer after Single Oral Doses [Journal Article

EPA Science Inventory

An individual (male, 36 years, 87 kg) ingested two separate doses of di-n-butyl phthalate (DnBP) and diisobutyl phthalate (DiBP) at a rate of ~60 µg/kg. Key monoester and oxidized metabolites were identified and quantified in urine continuously collected until 48 hours post dos...

Diagnosis of gynecological pseudoaneurysms and embolization with cyanoacrylate.

PubMed

Fernández Bermúdez, M J; Fernández Martínez, A M; Domitrovic, L A; Balboa Arregui, Ó

Pseudoaneurysms of the uterine artery are an uncommon cause of severe gynecological bleeding secondary to surgical manipulation of the pelvis or to instrumental delivery. The different imaging techniques are of vital importance in the diagnosis. Angiography is the technique used for confirmation and also for treatment in many cases. Endovascular treatment by embolizing the pseudoaneurysm has become established as the treatment of choice, making it possible to avoid hysterectomy in women of childbearing age. This article presents two cases of gynecological bleeding due to pseudoaneurysms (one secondary to surgery and one secondary to childbirth) that were embolized in a novel way using cyanoacrylate. Copyright © 2016 SERAM. Publicado por Elsevier España, S.L.U. All rights reserved.

[The advantages in using cyanoacrylate glue over skin staples as a method of skin graft fixation in the pediatric burns population].

PubMed

Curings, P; Vincent, P-L; Viard, R; Gir, P; Comparin, J-P; Voulliaume, D

2017-11-23

Local postoperative care and burn wound management can present with a certain degree of difficulty in the pediatric population. While the use of skin staples as a method of skin graft fixation is a well-known, rapid and simple method, their removal can be painful and may necessitate some sedation or even general anesthesia. We studied in this article the advantages and economic value of using the cyanoacrylate glue as a fixation method for skin grafts. A comparative study was carried out from 2012 to 2016. Hundred and eighteen infants with burns up to 5% of total body surface area were included in the study. Seventy-two infants had split thickness skin grafts fixed with skin staples. Forty-six infants had split thickness skin grafts fixed with cyanoacrylate glue. We compared the quality of graft, the sedation used during the first postoperative dressing, the length of hospital stay, the amount of glue used and the presence of complications. There is a difference between the two groups studied in terms of age and total burn surface area. The rate of graft take was 100% in both groups. The first postoperative dressing was carried out without the use of powerful analgesia in the cyanoacrylate group, while it was necessary to use general anesthesia in 64% of the skin staples group. The average length of stay in hospital after skin grafting was 4.9 days for the cyanoacrylate glue versus 6.5 days in the skin staples group. No complications were noted in the 2 groups. The use of cyanoacrylate glue allows rapid fixation of skin grafts and avoid general anesthesia for postoperative cares. Subsequently the length of hospital stay is reduced within 25%. The medico-economic value of glue protocol is highly significant compared to skin staples, while having similar good results and without significant problems. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Bis[μ-N-(tert-butyl­dimethyl­silyl)-N-(pyridin-2-ylmeth­yl)amido]­bis­[methyl­cobalt(II)

PubMed Central

Malassa, Astrid; Agthe, Christine; Görls, Helmar; Westerhausen, Matthias

2012-01-01

The green title complex, [Co2(CH3)2(C12H21N2Si)2], was obtained from bis­{[μ-N-tert-butyl­dimethyl­silyl-N-(pyridin-2-ylmeth­yl)amido]­chloridocobalt(II)} and methyl­lithium in diethyl ether at 195 K via a metathesis reaction. The dimeric cobalt(II) complex exhibits a crystallographic center of inversion in the middle of the Co2N2 ring (average Co—N = 2.050 Å). The CoII atom shows a distorted tetra­hedral coordination sphere. The exocyclic Co—N bond length to the pyridyl group shows a similar value of 2.045 (4) Å. The exocyclic methyl group has a rather long Co—C bond length of 2.019 (5) Å. PMID:22969464

Emulsion Polymerization of Butyl Acrylate: Spin Trapping and EPR Study

NASA Technical Reports Server (NTRS)

Kim, S.; Westmoreland, D.

1994-01-01

The propagating radical in the emulsion polymerization reaction of butyl acrylate was detected by Electron Paramagnetic Resonance spectroscopy using two spin trapping agents, 2-methyl-2nitrosopropane and alpha -N-tert-butylnitrone.

Use of 2-octyl cyanoacrylate adhesive in rat liver induced lesion.

PubMed

Santos, Orlando José dos; Marques, Giancarlo de Souza; Sauaia Filho, Euler Nicolau; Frota, Gustavo Medeiros; Santos, Rayan Haquim Pinheiro; Santos, Rennan Abud Pinheiro

2012-09-01

To evaluate the healing process of rat traumatic liver lesion corrected with the use of 2-octyl cyanoacrylate adhesive, compared to the use of biologically absorbable chromed catgut thread suture. Thirty mail adult rats were divided into two groups (15 per group) according to the used method for liver lesion correction as follows: adhesive group (AG), and catgut group (CG); each group being divided into three subsets of five animals (7th, 14th, and 21st day), respectively, according to post-surgery evaluation. All animals were submitted to homogeneous lesion applying synthetic bonding to AG and using chromed catgut suture to CG for lesion correction. Macroscopic and microscopic parameters of healing processes were evaluated. Both groups of animals showed excellent abdominal wall healing, with no evidence of infection, and no abdominal cavity peritonitis or abscess. The presence of adherence was observed in both groups with no statistically significant difference. As to macroscopic evaluation, there was statistically significant difference with respect to specific factors of clinical inflammation (ischemic inflammation and giant celular inflammatory reaction) between animals evaluated on the 10th day (ischemic necrosis and giant cellular inflammatory reaction) among animals evaluated on the 14th day (A14 versus C14). Applying 2-octyl-cyanoacrylate adhesive for correcting rat liver lesion does not change healing process when compared to the use of chromed catgut stitch.

Preparative enantioseparation of propafenone by counter-current chromatography using di-n-butyl L-tartrate combined with boric acid as the chiral selector.

PubMed

Tong, Shengqiang; Shen, Mangmang; Zheng, Ye; Chu, Chu; Li, Xing-Nuo; Yan, Jizhong

2013-09-01

This paper extends the research of the utilization of borate coordination complexes in chiral separation by counter-current chromatography (CCC). Racemic propafenone was successfully enantioseparated by CCC with di-n-butyl l-tartrate combined with boric acid as the chiral selector. The two-phase solvent system was composed of chloroform/ 0.05 mol/L acetate buffer pH 3.4 containing 0.10 mol/L boric acid (1:1, v/v), in which 0.10 mol/L di-n-butyl l-tartrate was added in the organic phase. The influence of factors in the enantioseparation of propafenone were investigated and optimized. A total of 92 mg of racemic propafenone was completely enantioseparated using high-speed CCC in a single run, yielding 40-42 mg of (R)- and (S)-propafenone enantiomers with an HPLC purity over 90-95%. The recovery for propafenone enantiomers from fractions of CCC was in the range of 85-90%. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

27 CFR 21.101 - tert-Butyl alcohol.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false tert-Butyl alcohol. 21.101....101 tert-Butyl alcohol. (a) Acidity (as acetic acid). 0.003 percent by weight maximum. (b) Color. Colorless. (c) Distillation range. When 100 ml of tertiary butyl alcohol are distilled, none should distill...

27 CFR 21.101 - tert-Butyl alcohol.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false tert-Butyl alcohol. 21.101....101 tert-Butyl alcohol. (a) Acidity (as acetic acid). 0.003 percent by weight maximum. (b) Color. Colorless. (c) Distillation range. When 100 ml of tertiary butyl alcohol are distilled, none should distill...

Evaluation of the abdominal wall cicatrization of rabbits exposed to nicotine and undergone abdominoplasty using nylon thread or cyanoacrylate.

PubMed

Costa, Luciano Assis; Jardim, Paulo dos Reis; Macedo, Pedro Henrique Alvares Paiva; Amaral, Vânia da Fonseca; Silva, Alcino Lázaro da; Barbosa, Cirênio de Almeida

2012-12-01

To compare the wound healing of the abdominal wall of rabbits exposed to nicotine and submitted to abdominoplasty using 2-octyl cyanoacrylate or nylon thread for the surgery suture. Thirty two rabbits were used. They were divided in subgroups: A1, A2, B1 e B2. Group A received saline 0.9%; group B received nicotine, both groups for 14 days before surgery. We performed an abdominoplasty with a nylon suture into the A1 and B1 subgroups; as for A2 and B2 groups the suture was performed with cyanoacrylate. The euthanasia happened in the 14th post-operative day. After, we evaluated: swollen process, fibroblast proliferation, collagen, neovascularization, and macroscope and microscope epithelization of the scars. We observed the presence of eosinophils in all scars exposed to the cyanoacrylate, and a significant increase of neovascularization in the subgroup B2 comparing to the A2 one (p=0.037). The other variables haven't showed any statistical difference. Nicotine hasn't influenced the swollen process, the fibroblast proliferation, the presence of collagen, neither the epithelialization. The neovascularization showed cicatricial immaturity when comparing group A2 to group B2. The eosinophils in the scars repaired with glue showed that the substance has acted as an allergen.

Tetra-butyl-ammonium tetra-kis-(trimethyl-silanolato-κO)ferrate(III).

PubMed

Hay, Michael; Staples, Richard; Lee, Andre

2012-09-01

In the title salt, (C(16)H(36)N)[Fe(C(3)H(9)OSi)(4)], the cation contains a central N atom bonded to four n-butyl alkyl groups in a tetra-hedral arrangement, while the anion contains a central Fe(III) atom tetra-hedrally coordinated by four trimethyl-silanolate ligands.

Percutaneous Treatment of Iatrogenic Pseudoaneurysms by Cyanoacrylate-Based Wall-Gluing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Del Corso, Andrea, E-mail: adelcorso2000@hotmail.com; Vergaro, Giuseppe

Purpose. Although the majority of iatrogenic pseudoaneurysms (PSAs) are amenable to ultrasound (US)-guided thrombin injection, patients with those causing neuropathy, claudication, significant venous compression, or soft tissue necrosis are considered poor candidates for this option and referred to surgery. We aimed to test the effectiveness and feasibility of a novel percutaneous cyanoacrylate glue (NBCA-MS)-based technique for treatment of symptomatic and asymptomatic iatrogenic PSA. Material and Methods. During a 3-year period, we prospectively enrolled 91 patients with iatrogenic PSA [total n = 94 (femoral n = 76; brachial n = 11; radial n = 6; axillary n = 1)]. PSA weremore » asymptomatic in 66 % of cases, and 34 % presented with symptoms due to neuropathy, venous compression, and/or soft tissue necrosis. All patients signed informed consent. All patients received NBCA-MS-based percutaneous treatment. PSA chamber emptying was first obtained by US-guided compression; superior and inferior walls of the PSA chamber were then stuck together using NBCA-MS microinjections. Successfulness of the procedure was assessed immediately and at 1-day and 1-, 3-, and 12-month US follow-up. Results. PSA occlusion rate was 99 % (93 of 94 cases). After treatment, mean PSA antero-posterior diameter decrease was 67 {+-} 22 %. Neuropathy and vein compression immediately disappeared in 91 % (29 of 32) of cases. Patients with tissue necrosis (n = 6) underwent subsequent outpatient necrosectomy. No distal embolization occurred, nor was conversion to surgery necessary. Conclusion. PSA treatment by way of NBCA-MS glue injection proved to be safe and effective in asymptomatic patients as well as those with neuropathy, venous compression, or soft-tissue necrosis (currently candidates for surgery). Larger series are needed to confirm these findings.« less

Biodegradation of di-n-butyl phthalate by bacterial consortium LV-1 enriched from river sludge

PubMed Central

Li, Fangfang; Ruan, Xinling; Song, Jian; Lv, Lv; Chai, Liyuan; Yang, Zhihui; Luo, Lin

2017-01-01

A stable bacterial consortium (LV-1) capable of degrading di-n-butyl phthalate (DBP) was enriched from river sludge. Community analysis revealed that the main families of LV-1 are Brucellaceae (62.78%) and Sinobacteraceae (14.83%), and the main genera of LV-1 are Brucella spp. (62.78%) and Sinobacter spp. (14.83%). The optimal pH and temperature for LV-1 to degrade DBP were pH 6.0 and 30°C, respectively. Inoculum size influenced the degradation ratio when the incubation time was < 24 h. The initial concentration of DBP also influenced the degradation rates of DBP by LV-1, and the degradation rates ranged from 69.0–775.0 mg/l/d in the first 24 h. Degradation of DBP was best fitted by first-order kinetics when the initial concentration was < 300 mg/l. In addition, Cd2+, Cr6+, and Zn2+ inhibited DBP degradation by LV-1 at all considered concentrations, but low concentrations of Pb2+, Cu2+, and Mn2+ enhanced DBP degradation. The main intermediates (mono-ethyl phthalate [MEP], mono-butyl phthalate [MBP], and phthalic acid [PA]) were identified in the DBP degradation process, thus a new biochemical pathway of DBP degradation is proposed. Furthermore, LV-1 also degraded other phthalates with shorter ester chains (DMP, DEP, and PA). PMID:28542471

Synthesis and characterization of a novel aminopolycarboxylate complexant for efficient trivalent f-element differentiation: N-butyl-2-acetamide-diethylenetriamine- N, N', N", N"-tetraacetic acid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heathman, Colt R.; Grimes, Travis S.; Jansone-Popova, Santa

The novel metal ion complexant N-butyl-2-acetamide-diethylenetriamine-N,N',N",N"-tetraacetic acid (DTTA-BuA) uses an amide functionalization to increase the total ligand acidity and attain efficient 4f/5f differentiation in low pH conditions. The amide, when located on the diethylenetriamine platform containing four acetate pendant arms maintains the octadentate coordination sphere for all investigated trivalent f-elements. This compact coordination environment inhibits the protonation of LnL- complexes, as indicated by lower K 111 constants relative to the corresponding protonation site of the free ligand. For actinide ions, the enhanced stability of AnL- lowers the K 111 for americium and curium beyond the aptitude of potentiometric detection. Densitymore » functional theory computations indicate the difference in the back-donation ability of Am 3+ and Eu 3+ f-orbitals is mainly responsible for stronger proton affinity of EuL- compared to AmL-. The measured stability constants for the formation of AmL- and CmL- complexes are consistently higher, relative to ML- complexes with lanthanides of similar charge density. When compared with the conventional aminopolycarboxylate diethylenetriamine pentaacetic acid (DTPA), the modified DTTA-BuA complexant features higher ligand acidity and the important An 3+/Ln 3+ differentiation when deployed on a liquid–liquid distribution platform.« less

Improved Bond Strength of Cyanoacrylate Adhesives Through Nanostructured Chromium Adhesion Layers

NASA Astrophysics Data System (ADS)

Gobble, Kyle; Stark, Amelia; Stagon, Stephen P.

2016-09-01

The performance of many consumer products suffers due to weak and inconsistent bonds formed to low surface energy polymer materials, such as polyolefin-based high-density polyethylene (HDPE), with adhesives, such as cyanoacrylate. In this letter, we present an industrially relevant means of increasing bond shear strength and consistency through vacuum metallization of chromium thin films and nanorods, using HDPE as a prototype material and cyanoacrylate as a prototype adhesive. For the as received HDPE surfaces, unmodified bond shear strength is shown to be only 0.20 MPa with a standard deviation of 14 %. When Cr metallization layers are added onto the HDPE at thicknesses of 50 nm or less, nanorod-structured coatings outperform continuous films and have a maximum bond shear strength of 0.96 MPa with a standard deviation of 7 %. When the metallization layer is greater than 50 nm thick, continuous films demonstrate greater performance than nanorod coatings and have a maximum shear strength of 1.03 MPa with a standard deviation of 6 %. Further, when the combination of surface roughening with P400 grit sandpaper and metallization is used, 100-nm-thick nanorod coatings show a tenfold increase in shear strength over the baseline, reaching a maximum of 2.03 MPa with a standard deviation of only 3 %. The substantial increase in shear strength through metallization, and the combination of roughening with metallization, may have wide-reaching implications in consumer products which utilize low surface energy plastics.

Hydrolysis of tert-butyl formate: Kinetics, products, and implications for the environmental impact of methyl tert-butyl ether

USGS Publications Warehouse

Church, Clinton D.; Pankow, James F.; Tratnyek, Paul G.

1999-01-01

Asessing the environmental fate of methyl tert-butyl ether (MTBE) has become a subject of renewed interest because of the large quantities of this compound that are being used as an oxygenated additive in gasoline. Various studies on the fate of MTBE have shown that it can be degraded to tert-butyl formate (TBF), particularly in the atmosphere. Although it is generally recognized that TBF is subject to hydrolysis, the kinetics and products of this reaction under environmentally relevant conditions have not been described previously. In this study, we determined the kinetics of TBF hydrolysis as a function of pH and temperature. Over the pH range of 5 to 7, the neutral hydrolysis pathway predominates, with kN = (1.0 ± 0.2) × 10−6/s. Outside this range, strong pH effects were observed because of acidic and basic hydrolyses, from which we determined that kA = (2.7 ± 0.5) × 10−3/(M·s) and kB = 1.7 ± 0.3/(M·s). Buffered and unbuffered systems gave the same hydrolysis rates for a given pH, indicating that buffer catalysis was not significant under the conditions tested. The activation energies corresponding to kN, kA, and kBwere determined to be 78 ± 5, 59 ± 4, and 88 ±11 kJ/mol, respectively. In all experiments, tert-butyl alcohol was found at concentrations corresponding to stoichiometric formation from TBF. Based on our kinetics data, the expected half-life for hydrolysis of TBF at pH = 2 and 4°C (as per some standard preservation protocols for water sampling) is 6 h. At neutral pH and 22°C, the estimated half-life is 5 d, and at pH = 11 and 22°C, the value is only 8 min.

Conformations of n-butyl imidazole: matrix isolation infrared and DFT studies.

PubMed

Ramanathan, N; Sundararajan, K; Sankaran, K

2015-03-15

Conformations of n-butyl imidazole (B-IMID) were studied using matrix isolation infrared spectroscopy by trapping in argon, xenon and nitrogen matrixes using an effusive nozzle source. The experimental studies were supported by DFT computations performed at the B3LYP/6-311++G(d,p) level. Computations identified nine unique minima for B-IMID, corresponding to conformers with tg(±)tt, tg(±)g(∓)t, tg(±)g(±)t, tg(±)tg(±), tg(±)tg(∓), tg(±)g(∓)g(∓), tg(±)g(±)g(±), tg(±)g(∓)g(±) and tg(±)g(±)g(∓) structures, given in order of increasing energy. Computations of the transition state structures connecting the higher energy conformers to the global minimum, tg(±)tt structure were carried out. The barriers for the conformer inter-conversion were found to be ∼2 kcal/mol. Natural Bond Orbital (NBO) analysis was performed to understand the reasons for conformational preferences in B-IMID. Copyright © 2014 Elsevier B.V. All rights reserved.

URINARY AND AMNIOTIC FLUID LEVELS OF PHTHALATE MONOESTERS IN RATS AFTER THE ORAL ADMINISTRATION OF DI(2-ETHYLHEXYL) PHTHALATE AND DI-N-BUTYL PHTHALATE

EPA Science Inventory

Two studies were designed to examine amniotic fluid and maternal urine concentrations of the di(2-ethylhexyl) phthalate (DEHP) metabolite mono(2-ethylhexyl) phthalate (MEHP) and the di-n-butyl phthalate (DBP) metabolite monobutyl phthalate (MBP) after administration of DEHP and D...

40 CFR 180.411 - Fluazifop-P-butyl; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... residues of the herbicide, fluazifop-P-butyl, butyl(R)-2-[4-[[5-(trifluoromethyl)-2-pyridinyl]oxy]phenoxy... of the herbicide, fluazifop-P-butyl, butyl(R)-2-[4-[[5-(trifluoromethyl)-2-pyridinyl]oxy]phenoxy...

Biotransformation at 10 C of di-n-butyl phthalate in subsurface microcosms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chauret, C.; Inniss, W.E.; Mayfield, C.I.

1996-09-01

Di-n-butyl phthalate (DBP) was found to be transformed by microorganisms under aerobic and anaerobic conditions at 10 C in microcosms simulating the Canadian Forces Base (CFB) Borden subsurface environment. Biotransformation of DBP was observed under aerobic, nitrate-reducing, Fe(III)-reducing, and sulfate-reducing conditions. The biotransformation of DBP in the microcosms was significantly decrease3d as the redox potential was lowered, especially under sulfate-reducing conditions. However, other factors such as nutrient depletion and buildup of toxic intermediates could have affected the biotransformation rates. The highest DBP biotransformation rate (0.57 {micro}g DBP{center_dot}g sediment{sup {minus}1}{center_dot}day{sup {minus}1}) was under sulfate-reducing conditions. Biotransformation of DBP at 10 Cmore » was significantly enhanced by the addition of 10 mM NaNO{sub 3} suggesting that both the addition of nitrate and high redox conditions favor its biotransformation in subsurface environments.« less

APMP.QM-S8: determination of mass fraction of benzoic acid, methyl paraben and n-butyl paraben in soy sauce

NASA Astrophysics Data System (ADS)

Teo, Tang Lin; Gui, Ee Mei; Lu, Ting; Sze Cheow, Pui; Giannikopoulou, Panagiota; Kakoulides, Elias; Lampi, Evgenia; Choi, Sik-man; Yip, Yiu-chung; Chan, Pui-kwan; Hui, Sin-kam; Wollinger, Wagner; Carvalho, Lucas J.; Garrido, Bruno C.; Rego, Eliane C. P.; Ahn, Seonghee; Kim, Byungjoo; Li, Xiuqin; Guo, Zhen; Styarini, Dyah; Aristiawan, Yosi; Putri Ramadhaningtyas, Dillani; Aryana, Nurhani; Ebarvia, Benilda S.; Dacuaya, Aaron; Tongson, Alleni; Aganda, Kim Christopher; Junvee Fortune, Thippaya; Tangtrirat, Pradthana; Mungmeechai, Thanarak; Ceyhan Gören, Ahmet; Gündüz, Simay; Yilmaz, Hasibe

2017-01-01

The supplementary comparison APMP.QM-S8: determination of mass fraction of benzoic acid, methyl paraben and n-butyl paraben in soy sauce was coordinated by the Health Sciences Authority, Singapore under the auspices of the Organic Analysis Working Group (OAWG) of the Comité Consultatif pour la Quantité de Matière (CCQM). Ten national metrology institutes (NMIs) or designated institutes (DIs) participated in the comparison. All the institutes participated in the comparison for benzoic acid, while six NMIs/DIs participated in the comparison for methyl paraben and n-butyl paraben. The comparison was designed to enable participating institutes to demonstrate their measurement capabilities in the determination of common preservatives in soy sauce, using procedure(s) that required simple sample preparation and selective detection in the mass fraction range of 50 to 1000 mg/kg. The demonstrated capabilities can be extended to include other polar food preservatives (e.g. sorbic acid, propionic acid and other alkyl benzoates) in water, aqueous-based beverages (e.g. fruit juices, tea extracts, sodas, sports drinks, etc) and aqueous-based condiments (e.g. vinegar, fish sauce, etc). Liquid--liquid extraction and/or dilution were applied, followed by instrumental analyses using LC-MS/MS, LC-MS, GC-MS (with or without derivatisation) or HPLC-DAD. Isotope dilution mass spectrometry was used for quantification, except in the case of a participating institute, where external calibration method was used for quantification of all three measurands. The assigned Supplementary Comparison Reference Values (SCRVs) were the medians of ten results for benzoic acid, six results for methyl paraben and six results for n-butyl paraben. Benzoic acid was assigned a SCRV of 154.55 mg/kg with a combined standard uncertainty of 0.94 mg/kg, methyl paraben was assigned a SCRV of 100.95 mg/kg with a combined standard uncertainty of 0.40 mg/kg, and n-butyl paraben was assigned a SCRV of 99.05 mg

40 CFR 721.3438 - Chlorohydroxyalkyl butyl ether (generic).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Chlorohydroxyalkyl butyl ether... Specific Chemical Substances § 721.3438 Chlorohydroxyalkyl butyl ether (generic). (a) Chemical substance... chlorohydroxyalkyl butyl ether (PMN P-99-1295) is subject to reporting under this section for the significant new use...

40 CFR 721.3438 - Chlorohydroxyalkyl butyl ether (generic).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Chlorohydroxyalkyl butyl ether... Specific Chemical Substances § 721.3438 Chlorohydroxyalkyl butyl ether (generic). (a) Chemical substance... chlorohydroxyalkyl butyl ether (PMN P-99-1295) is subject to reporting under this section for the significant new use...

Crystal structure of (S)-sec-butyl­ammonium l-tartrate monohydrate

PubMed Central

Publicover, Ernlie A.; Kolwich, Jennifer; Stack, Darcie L.; Doué, Alyssa J.; Ylijoki, Kai E. O.

2017-01-01

The title hydrated mol­ecular salt, C4H12N+·C4H5O6 −·H2O, was prepared by deprotonation of enanti­opure l-tartaric acid with racemic sec-butyl­amine in water. Only one enanti­omer was observed crystallographically, resulting from the combination of (S)-sec-butyl­amine with l-tartaric acid. The sec-butyl­ammonium moiety is disordered over two conformations related by rotation around the CH–CH2 bond; the refined occupancy ratio is 0.68 (1):0.32 (1). In the crystal, mol­ecules are linked through a network of O—H⋯O and N—H⋯O hydrogen-bonding inter­actions, between the ammonium H atoms, the tartrate hy­droxy H atoms, and the inter­stitial water, forming a three-dimensional supra­molecular structure. PMID:28529783

Inhibition of urinary bladder tumors induced by N-butyl-N-(4-hydroxybutyl)-nitrosamine in rats by green tea.

PubMed

Sato, D

1999-02-01

Recently, the anticarcinogenic effects of green tea have been studied in sites other than the urinary tract. The present study examined the inhibition by green tea of vesical tumors induced in rats by N-butyl-N-(4-hydroxybutyl) nitrosamine (BBN). In the first series of experiments, 0.05% BBN was added to the drinking water of rats and remained present for 5 weeks. In one experiment, six groups of animals received either tap water, green tea, matcha, hojicha, oolong tea or black tea from week 6. In a second experiment, three groups of rats received either tap water, green tea extract or powdered green tea mixed into a pellet diet from week 6. In a third experiment, five groups of rats were fed a pellet diet with addition of either 0, 0.15, 1.5 or 3.0% powdered green tea from week 6. All rats were killed and examined at 40 weeks. Green tea, particularly green tea leaves, dose-dependently inhibited the growth of BBN-induced urinary bladder tumors when given after the carcinogen. Green tea may inhibit bladder tumor growth.

Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lisal, Martin; Department of Physics, Faculty of Science, J. E. Purkinje University, 400 96 Usti n. Lab.; Izak, Pavel

Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf{sub 2}N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 {mu}mol/m{sup 2} at 300 K. For [bmim][Tf{sub 2}N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are {+-}0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and itsmore » value decreases with increase of the n-hexane surface density. The [bmim][Tf{sub 2}N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.« less

Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface.

PubMed

Lísal, Martin; Izák, Pavel

2013-07-07

Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf2N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 μmol/m(2) at 300 K. For [bmim][Tf2N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are ±0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf2N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

Refreshing the Aged Latent Fingerprints with Ionizing Radiation Prior to the Cyanoacrylate Fuming Procedure: A Preliminary Study.

PubMed

Ristova, Mimoza M; Radiceska, Pavlina; Bozinov, Igorco; Barandovski, Lambe

2016-05-01

One of the crucial factors determining the cyanoacrylate deposit quality over latent fingerprints appeared to be the extent of the humidity. This work focuses on the enhancement/refreshment of age-degraded latent fingerprints by irradiating the samples with UV, X-ray, or thermal neutrons prior to the cyanoacrylate (CA) fuming. Age degradation of latent fingerprints deposited on glass surfaces was examined through the decrease in the number of characteristic minutiae counts over time. A term "critical day" was introduced for the time at which the average number of identifiable minutiae definitions drops to one-half. Fingerprints older than their "critical day" were exposed to either UV, X-ray, or thermal neutrons. Identical reference samples were kept unexposed. All samples, both reference and irradiated, were developed during a single CA fuming procedure. Comparative latent fingerprint analysis showed that exposure to ionizing radiation enhances the CA fuming, yielding a 20-30% increase in average minutiae count. © 2015 American Academy of Forensic Sciences.

Di-tert-butyl­chlorido(N,N-dibenzyl­dithio­carbamato)tin(IV)

PubMed Central

Abdul Muthalib, Amirah Faizah; Baba, Ibrahim; Mohamed Tahir, Mohamed Ibrahim; Tiekink, Edward R. T.

2011-01-01

The SnIV atom in the title diorganotin dithio­carbamate, [Sn(C4H9)2(C15H14NS2)Cl], is penta­coordinated by an asymmetrically coordinating dithio­carbamate ligand, a Cl atom and two C atoms of the Sn-bound tert-butyl groups. The resulting C2ClS2 donor set defines a coordination geometry inter­mediate between square pyramidal and trigonal bipyramidal with a slight tendency towards the former. PMID:21522304

Photo-crosslinkable cyanoacrylate bioadhesive: shrinkage kinetics, dynamic mechanical properties, and biocompatibility of adhesives containing TMPTMA and POSS nanostructures as crosslinking agents.

PubMed

Ghasaban, S; Atai, M; Imani, M; Zandi, M; Shokrgozar, M-A

2011-11-01

The study investigates the photo-polymerization shrinkage behavior, dynamic mechanical properties, and biocompatibility of cyanoacrylate bioadhesives containing POSS nanostructures and TMPTMA as crosslinking agents. Adhesives containing 2-octyl cyanoacrylate (2-OCA) and different percentages of POSS nanostructures and TMPTMA as crosslinking agents were prepared. The 1-phenyl-1, 2-propanedione (PPD) was incorporated as photo-initiator into the adhesive in 1.5, 3, and 4 wt %. The shrinkage strain of the specimens was measured using bonded-disk technique. Shrinkage strain, shrinkage strain rate, maximum and time at maximum shrinkage strain rate were measured and compared. Mechanical properties of the adhesives were also studied using dynamic mechanical thermal analysis (DMTA). Biocompatibility of the adhesives was examined by MTT method. The results showed that shrinkage strain increased with increasing the initiator concentration up to 3 wt % in POSS-containing and 1.5 wt % in TMPTMA-containing specimens and plateaued out at higher concentrations. By increasing the crosslinking agent, shrinkage strain, and shrinkage strain rate increased and the time at maximum shrinkage strain rate decreased. The study indicates that the incorporation of crosslinking agents into the cyanoacrylate adhesives resulted in improved mechanical properties. Preliminary MTT studies also revealed better biocompatibility profile for the adhesives containing crosslinking agents comparing to the neat specimens. Copyright © 2011 Wiley Periodicals, Inc.

Emergency wounds treated with cyanoacrylate and long-term results in pediatrics: a series of cases; what are the advantages and boards?

PubMed Central

Gulalp, Betul; Seyhan, Tamer; Gursoy, Sonnur; Altinors, M Nur

2009-01-01

Background Ethyl-2-cyanoacrylate (ECA) is a tissue adhesive material applied to close superficial wounds. The aim of this study was to explore the benefits of cyanoacrylates in the emergency department in children with current application with regard to cost-effectiveness, satisfaction and long follow up. Findings Patients were treated after assignment of the consent with an explanation by the relatives in a tertiary emergency department (ED), 2007. The evaluation was based on different superficial wound repairs due to blunt trauma within a 2-hour time period (<6 hours), and small wounds (≤3 cm). These wounds were cleansed with serum sale and then dried with gauze. Wound repairs were observed for six months in order to observe the tissue changes. The patient's age, sex, indication, application time, pain score, cost, additional tending (if needed), complications, and cosmetic satisfaction were recorded. A total of 9 patients were evaluated and followed for 6 months. Except for one, all children were treated without any serious complications. ECA was cost-effective, time-saving, and provided successful repair satisfaction by a blinded plastic surgeon and patient/parents. Conclusion This report displayed the pediatric effective use of cyanoacrylates, even in non- traditional repairs in the emergency departments. PMID:19594954

Sclerosant extravasation as a complication of sclerosing endotherapy for bleeding gastric varices.

PubMed

Cheng, H-C; Cheng, P-N; Tsai, Y-M; Tsai, H-M; Chen, C-Y

2004-03-01

We report here the case of a 65-year-old woman who suffered intraperitoneal sclerosant leakage after endoscopic injection sclerotherapy for bleeding gastric varices. In total, 3 ml of N-butyl-2-cyanoacrylate and Lipiodol mixture was injected. The patient developed mild fever and pain over the left upper quadrant and flank after the procedure. In addition to a Lipiodol-filled gastric varix, the imaging studies disclosed a wide spread of Lipiodol over the left peritoneal cavity. The patient was kept fasting with parenteral antibiotics and nutrition. She responded well to the treatment, and all of the symptoms had subsided 6 days later.

Enantioselective behaviour of the herbicide fluazifop-butyl in vegetables and soil.

PubMed

Qi, Yanli; Liu, Donghui; Liu, Chang; Liang, Yiran; Zhan, Jing; Zhou, Zhiqiang; Wang, Peng

2017-04-15

The enantioselective dissipation of the enantiomers of fluazifop-butyl in tomato, cucumber, pakchoi, rape and soil under field condition was investigated to elucidate the enantioselective environmental behaviours and chiral stability of the optical pure product. Fluazifop, the major chiral metabolite of fluazifop-butyl, was also detected. Fluazifop-butyl dissipated rapidly in the vegetables and soil with the half-lives of the enantiomers ranging from 1.62 to 2.84days. Enantioselective degradations of fluazifop-butyl were found. In tomato and cucumber, S-fluazifop-butyl dissipated faster than R-enantiomer, while R-fluazifop-butyl showed a faster degradation in pakchoi, rape and soil. Fluazifop was found almost immediately after the application of fluazifop-butyl and had relatively longer persistent time. When the optical pure product fluazifop-P-butyl was applied, rapid degradation to R-fluazifop was found with half-lives from 1.24 to 2.28days, and no S-fluazifop-butyl or S-fluazifop was detected showing the herbicidally active fluazifop-P-butyl and R-fluazifop were configurationally stable. Copyright © 2016 Elsevier Ltd. All rights reserved.

Nuclear Magnetic Resonance Shift Reagents: Abnormal 13C Shifts Produced by Complexation of Lanthanide Chelates with Saturated Amines and n-Butyl Isocyanide

PubMed Central

Marzin, Claude; Leibfritz, Dieter; Hawkes, Geoffrey E.; Roberts, John D.

1973-01-01

Lanthanide-induced shfits of 13C nuclear magnetic resonances are reported for several amines and n-butyl isocyanide. Contact contributions to such shifts, especially of β carbons, are clearly important for the chelates of Eu+3 and Pr+3. The importance of contact terms is shown to change in a rather predictable manner with the structure of the amine. PMID:16592062

Airflow-directed in situ electrospinning of a medical glue of cyanoacrylate for rapid hemostasis in liver resection

NASA Astrophysics Data System (ADS)

Jiang, Kai; Long, Yun-Ze; Chen, Zhao-Jun; Liu, Shu-Liang; Huang, Yuan-Yuan; Jiang, Xingyu; Huang, Zhi-Qiang

2014-06-01

Rapid hemostasis of solitary organs is still a big challenge in surgical procedures or after major trauma in both civilians and on the battlefield. Here, we report the first use of an airflow-directed in situ electrospinning method to precisely and homogeneously deposit a medical glue of n-octyl-2-cyanoacrylate (OCA) ultrathin fibers onto a wound surface to realize rapid hemostasis in dozens of seconds. In vivo and in vitro experiments on pig liver resection demonstrate that the self-assembled electrospun OCA membrane with high strength, good flexibility and integrity is very compact and no fluid seeping is observed even under a pressure of 147 mm Hg. A similar effect has been achieved in an in vivo experiment on pig lung resection. The results provide a very promising alternative for rapid hemostasis of solitary organs as well as other traumas, providing evidence that the postoperative drainage tube may not be always necessary for surgery in the near future.Rapid hemostasis of solitary organs is still a big challenge in surgical procedures or after major trauma in both civilians and on the battlefield. Here, we report the first use of an airflow-directed in situ electrospinning method to precisely and homogeneously deposit a medical glue of n-octyl-2-cyanoacrylate (OCA) ultrathin fibers onto a wound surface to realize rapid hemostasis in dozens of seconds. In vivo and in vitro experiments on pig liver resection demonstrate that the self-assembled electrospun OCA membrane with high strength, good flexibility and integrity is very compact and no fluid seeping is observed even under a pressure of 147 mm Hg. A similar effect has been achieved in an in vivo experiment on pig lung resection. The results provide a very promising alternative for rapid hemostasis of solitary organs as well as other traumas, providing evidence that the postoperative drainage tube may not be always necessary for surgery in the near future. Electronic supplementary information (ESI) available

Amended final report on the safety assessment of PPG-40 butyl ether with an addendum to include PPG-2, -4, -5, -9, -12, -14, -15, -16, -17, -18, -20, -22, -24, -26, -30, -33, -52, and -53 butyl ethers.

PubMed

Lanigan, R S

2001-01-01

The Polypropylene Glycol (PPG) Butyl Ethers function as skinand hair-conditioning agents in cosmetics. Intestinal absorption of the PPG Butyl Ethers was inversely proportional to the molecular weight. In general, the toxicity of the PPG Butyl Ethers decreased as the molecular weight increased. In acute studies, moderate intraperitoneal (IP) doses of various PPG Butyl Ethers caused convulsive seizures in mice and anesthetized dogs, and large oral doses caused decreased activity, anuria, renal tubular swelling and necrosis, and hepatic swelling and necrosis. PPG-2 Butyl Ether vapors were nontoxic by the inhalation route. PPG-2 Butyl Ether was nontoxic in short-term feeding and dermal exposure studies in rats. In animal irritation studies, PPG-2 Butyl Ether caused minor, transient erythema and desquamation; in addition, erythema, edema, ecchymosis, necrosis, and other changes were observed during an acute percutaneous study. PPG-2 Butyl Ether also caused minor to moderate conjunctival irritation and minor corneal injury. PPG-2 Butyl Ether when dermally applied was nontoxic to pregnant rats and was nonteratogenic at doses up to 1.0 ml/kg/day. PPG BE800 at concentrations of 0.001% to 0.26% in feed was noncarcinogenic to rats after 2 years of treatment. In clinical studies, PPG BE800 was nonirritating and nonsensitizing to the skin when tested using 200 subjects. PPG-40 Butyl Ether was neither an irritant nor a sensitizer in a repeat-insult patch test using 112 subjects. Although clinical testing did not indicate significant skin irritation is produced by these ingredients, the animal test data did indicate the potential that these ingredients can be irritating. Therefore, it was concluded that the PPG Butyl Ethers can be used safely in cosmetic products if they are formulated to avoid irritation. Data on the component ingredients, Propylene Glycol, PPG, and n-Butyl Alcohol, from previous cosmetic ingredient safety assessments were also considered and found to support

Collagen-Immobilized Lipases Show Good Activity and Reusability for Butyl Butyrate Synthesis.

PubMed

Dewei, Song; Min, Chen; Haiming, Cheng

2016-11-01

Candida rugosa lipases were immobilized onto collagen fibers through glutaraldehyde cross-linking method. The immobilization process has been optimized. Under the optimal immobilization conditions, the activity of the collagen-immobilized lipase reached 340 U/g. The activity was recovered of 28.3 % by immobilization. The operational stability of the obtained collagen-immobilized lipase for hydrolysis of olive oil emulsion was determined. The collagen-immobilized lipase showed good tolerance to temperature and pH variations in comparison to free lipase. The collagen-immobilized lipase was also applied as biocatalyst for synthesis of butyl butyrate from butyric acid and 1-butanol in n-hexane. The conversion yield was 94 % at the optimal conditions. Of its initial activity, 64 % was retained after 5 cycles for synthesizing butyl butyrate in n-hexane.

In situ synthesis of di-n-butyl l-tartrate-boric acid complex chiral selector and its application in chiral microemulsion electrokinetic chromatography.

PubMed

Hu, Shaoqiang; Chen, Yonglei; Zhu, Huadong; Zhu, Jinhua; Yan, Na; Chen, Xingguo

2009-11-06

A novel procedure for in situ assembling a complex chiral selector, di-n-butyl l-tartrate-boric acid complex, by the reaction of di-n-butyl l-tartrate with boric acid in a running buffer was reported and its application in the enantioseparation of beta-blockers and structural related compounds by chiral microemulsion electrokinetic chromatography (MEEKC) has been demonstrated. In order to achieve a good enantioseparation, the effect of dibutyl l-tartrate and sodium tetraborate concentration, surfactant identity and concentration, cosurfactant, buffer pH and composition, organic modifiers, as well as applied voltage and capillary length were investigated. Ten pairs of enantiomers that could not be separated with only dibutyl l-tartrate, obtained good chiral separation using the complex chiral selector; among them, seven pairs could be baseline resolved under optimized experimental conditions. The fixation of chiral centers by the formation of five-membered rings, and being oppositely charged with basic analytes were thought to be the key factors giving the complex chiral selector a superior chiral recognition capability. The effect of the molecular structure of analytes on enantioseparation was discussed in terms of molecular interaction.

Morphological, elemental, and optical characterization of plasma polymerized n-butyl methacrylate thin films

NASA Astrophysics Data System (ADS)

Nasrin, Rahima; Hossain, Khandker S.; Bhuiyan, A. H.

2018-05-01

Plasma polymerized n-butyl methacrylate (PPnBMA) thin films of varying thicknesses were prepared at room temperature by AC plasma polymerization system using a capacitively coupled parallel plate reactor. Field-emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), energy-dispersive X-ray (EDX) analysis, and ultraviolet-visible (UV-Vis) spectroscopic investigation have been performed to study the morphological, elemental, and optical properties of the PPnBMA thin films, respectively. The flat and defect-free nature of thin films were confirmed by FESEM and AFM images. With declining plasma power, average roughness and root mean square roughness increase. Allowed direct transition ( E gd) and indirect transition ( E gi) energy gaps were found to be 3.64-3.80 and 3.38-3.45 eV, respectively, for PPnBMA thin films of different thicknesses. Values of E gd as well as E gi increase with the increase of thickness. The extinction coefficient, Urbach energy, and steepness parameter were also determined for these thin films.

Impetigo herpetiformis occurring during N-butyl-scopolammonium bromide therapy in pregnancy: case report.

PubMed

Guerriero, C; Lanza Silveri, S; Sisto, T; Rosati, D; De Simone, C; Fossati, B; Pomini, F; Rotoli, M; Amerio, P; Capizzi, R

2008-01-01

Impetigo herpetiformis (IH) is a rare dermatosis arising during the third trimester of pregnancy which is generally considered as a form of pustular psoriasis of unknown aetiology. Clinically it is characterized by erythematous plaques surrounded by sterile pustules associated with fever, diarrhea, sweating and increasing risk of stillbirth for placental insufficiency. We describe a case of developed erythematous plaques surrounded by pustules localised initially to the trunk of a 35-year-old woman at the 34th week of gestation after 5 days of treatment with N-Butyl-Scopolammonium, and which later involved the upper and lower limbs. Skin histology confirmed the diagnosis of generalised pregnancy pustular psoriasis (impetigo herpetiformis). IH is reported to be associated with hypocalcemia, hypoparathyroidism, use of oral contraceptives and bacterial infections. This is the first report suggesting the potential role of drugs other than oral contraceptives in the pathogenetic mechanism of this disease. In this case an adverse cutaneous reaction to BB could be the cause of the development of Koebner isomorphism.

Effects of cyanoacrylate fuming, time after recovery, and location of biological material on the recovery and analysis of DNA from post-blast pipe bomb fragments*.

PubMed

Bille, Todd W; Cromartie, Carter; Farr, Matthew

2009-09-01

This study investigated the effects of time, cyanoacrylate fuming, and location of the biological material on DNA analysis of post-blast pipe bomb fragments. Multiple aliquots of a cell suspension (prepared by soaking buccal swabs in water) were deposited on components of the devices prior to assembly. The pipe bombs were then deflagrated and the fragments recovered. Fragments from half of the devices were cyanoacrylate fumed. The cell spots on the fragments were swabbed and polymerase chain reaction/short tandem repeat analysis was performed 1 week and 3 months after deflagration. A significant decrease in the amount of DNA recovered was observed between samples collected and analyzed within 1 week compared with the samples collected and analyzed 3 months after deflagration. Cyanoacrylate fuming did not have a measurable effect on the success of the DNA analysis at either time point. Greater quantities of DNA were recovered from the pipe nipples than the end caps. Undeflagrated controls showed that the majority (>95%) of the DNA deposited on the devices was not recovered at a week or 3 months.

Methemoglobin formation from butylated hydroxyanisole and oxyhemoglobin. Comparison with butylated hydroxytoluene and p-hydroxyanisole.

PubMed

Stolze, K; Nohl, H

1992-01-01

The widely used food additives butylated hydroxyanisole (BHA) and butylated hydroxytoluene (BHT) react with oxyhemoglobin, thereby forming methemoglobin. The reaction rates were measured using visible spectroscopy, and second order rate constants were established for BHA and compared with p-hydroxyanisole. Using ESR we investigated the involvement of free radical reaction intermediates. The expected one-electron oxidation product of BHA and BHT, the phenoxyl radical, could only be detected with pure 3-t-butyl-4-hydroxyanisole and oxyhemoglobin. With the commercial mixture of 2- and 3-t-butyl-4-hydroxyanisole a very strong ESR signal of a secondary free radical species was observed, similar to the one observed earlier with p-hydroxyanisole and dependent on the presence of free thiol groups, so that we assumed the intermediate existence of a perferryl species, the MetHb-H2O2 adduct. In a second series of experiments we investigated the reactivity of this postulated intermediate with BHA and BHT, starting with a pure MetHb/H2O2-phenol mixture in a stopped-flow apparatus linked to the ESR spectrometer, detecting the expected phenoxyl radicals from BHA and p-hydroxyanisole. Due to the low solubility and decreased reactivity of BHT only traces of phenoxyl type radical were found together with a high concentration of unreacted perferryl species. The reactivity of BHA, BHT and p-hydroxyanisole with free thiol groups is demonstrated by an increased reaction rate in the presence of the thiol group blocking substance NEM.

Activation of C-H bonds by rare-earth metallocene-butyl complexes.

PubMed

Grindell, Richard; Day, Benjamin M; Guo, Fu-Sheng; Pugh, Thomas; Layfield, Richard A

2017-09-05

The stable metallocene-butyl complexes [(Cp Me ) 2 M( n Bu)] 2 (M = Y, Dy) were synthesized and their reactivity towards to ferrocene and bulky N-heterocyclic carbenes investigated. Selective mono-deprotonation of ferrocene and a benzylic methyl group of IMes were observed, whereas a control reaction of (Cp Me ) 3 M with IMes resulted in a normal-to-abnormal NHC rearrangement.

Molecular recognition at methyl methacrylate/n-butyl acrylate (MMA/nBA) monomer unit boundaries of phospholipids at p-MMA/nBA copolymer surfaces.

PubMed

Yu, Min; Urban, Marek W; Sheng, Yinghong; Leszczynski, Jerzy

2008-09-16

Lipid structural features and their interactions with proteins provide a useful vehicle for further advances in membrane proteins research. To mimic one of potential lipid-protein interactions we synthesized poly(methyl methacrylate/ n-butyl acrylate) (p-MMA/nBA) colloidal particles that were stabilized by phospholipid (PLs). Upon the particle coalescence, PL stratification resulted in the formation of surface localized ionic clusters (SLICs). These entities are capable of recognizing MMA/nBA monomer interfaces along the p-MMA/nBA copolymer backbone and form crystalline SLICs at the monomer interface. By utilizing attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy and selected area electron diffraction (SAD) combined with ab initio calculations, studies were conducted that identified the origin of SLICs as well as their structural features formed on the surface of p-MMA/nBA copolymer films stabilized by 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) PL. Specific entities responsible for SLIC formation are selective noncovalent bonds of anionic phosphate and cationic quaternary ammonium segments of DLPC that interact with two neighboring carbonyl groups of nBA and MMA monomers of the p-MMA/nBA polymer backbone. To the best of our knowledge this is the first example of molecular recognition facilitated by coalescence of copolymer colloidal particles and the ability of PLs to form SLICs at the boundaries of the neighboring MMA and nBA monomer units of the p-MMA/nBA chain. The dominating noncovalent bonds responsible for the molecular recognition is a combination of H-bonding and electrostatic interactions.

Kinetics of proton transfer from tetra(4-nitro-5- tert-butyl)phthalocyanine to nitrogen-containing bases in benzene

NASA Astrophysics Data System (ADS)

Petrov, O. A.; Kuzmina, E. L.; Maizlish, V. E.; Rodionov, A. V.

2014-01-01

The acid-basic interaction between tetra(4-nitro-5- tert-butyl)phthalocyanine and pyridine, 2-methylpyridine, morpholine, piperidine, n-butylamine, diethylamine, and triethylamine in benzene is studied. It is found that the intermolecular transfer of protons of NH groups from tetra(4-nitro-5- tert-butyl)phthalocyanine to morpholine and diethylamine is characterized by unusually low values of the reaction constant rates. The effect of the structure of tetra(4-nitro-5- tert-butyl)phthalocyanine and tetra(3-nitro-5- tert-butyl)phthalocyanine, and of the nature of the base on the kinetic parameters of acid-base interaction is demonstrated. A structure is proposed for complexes with the transfer of displaced phthalocyanines' protons. It is found that they undergo decomposition over time.

PRODUCTS OF THE GAS-PHASE REACTIONS OF THE OH RADICAL WITH N-BUTYL METHYL ETHER AND 2-ISOPROPOXYETHANOL: REACTIONS OF ROC(O)< RADICALS. (R825252)

EPA Science Inventory

The products of the gas-phase reactions of the OH radical with n-butyl methyl ether and 2-isopropoxyethanol in the presence of NO have been investigated at 298 ? 2 K and 740 Torr total pressure of air by gas chromatography and in situ atmospheric pressure ionization...

(N-Benzyl-N-ethyl­dithio­carbamato)di-tert-butyl­chloridotin(IV)

PubMed Central

Abdul Muthalib, Amirah Faizah; Baba, Ibrahim; Mohamed Tahir, Mohamed Ibrahim; Tiekink, Edward R. T.

2011-01-01

The SnIV atom in the title diorganotin dithio­carbamate, [Sn(C4H9)2Cl(C10H12NS2)], is penta­coordinated by an asymmetrically coordinating dithio­carbamate ligand, a Cl and two C atoms of the Sn-bound tert-butyl groups. The resulting C2ClS2 donor set defines a coordination geometry inter­mediate between square pyramidal and trigonal bipyramidal with a slight tendency towards the former. In the crystal structure, C—H⋯π contacts link centrosymmetrically related mol­ecules into dimeric aggregates. PMID:21522295

Portal Vein Embolization Before Liver Resection: A Systematic Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lienden, K. P. van, E-mail: k.p.vanlienden@amc.uva.nl; Esschert, J. W. van den; Graaf, W. de

2013-02-15

This is a review of literature on the indications, technique, and outcome of portal vein embolization (PVE). A systematic literature search on outcome of PVE from 1990 to 2011 was performed in Medline, Cochrane, and Embase databases. Forty-four articles were selected, including 1,791 patients with a mean age of 61 {+-} 4.1 years. Overall technical success rate was 99.3 %. The mean hypertrophy rate of the FRL after PVE was 37.9 {+-} 0.1 %. In 70 patients (3.9 %), surgery was not performed because of failure of PVE (clinical success rate 96.1 %). In 51 patients (2.8 %), the hypertrophymore » response was insufficient to perform liver resection. In the other 17 cases, 12 did not technically succeed (0.7 %) and 7 caused a complication leading to unresectability (0.4 %). In 6.1 %, resection was cancelled because of local tumor progression after PVE. Major complications were seen in 2.5 %, and the mortality rate was 0.1 %. A head-to-head comparison shows a negative effect of liver cirrhosis on hypertrophy response. The use of n-butyl cyanoacrylate seems to have a greater effect on hypertrophy, but the difference with other embolization materials did not reach statistical significance. No difference in regeneration is seen in patients with cholestasis or chemotherapy. Preoperative PVE has a high technical and clinical success rate. Liver cirrhosis has a negative effect on regeneration, but cholestasis and chemotherapy do not seem to have an influence on the hypertrophy response. The use of n-butyl cyanoacrylate may result in a greater hypertrophy response compared with other embolization materials used.« less

Preoperative Embolization of Skull Base Meningiomas: Outcomes in the Onyx Era.

PubMed

Przybylowski, Colin J; Baranoski, Jacob F; See, Alfred P; Flores, Bruno C; Almefty, Rami O; Ding, Dale; Chapple, Kristina M; Sanai, Nader; Ducruet, Andrew F; Albuquerque, Felipe C

2018-05-09

Preoperative embolization may facilitate skull base meningioma resection, but its safety and efficacy in the Onyx era have not been investigated. In this retrospective cohort study, we evaluated the outcomes of preoperative embolization of skull base meningiomas using Onyx as the primary embolysate. We queried an endovascular database for patients with skull base meningiomas who underwent preoperative embolization at our institution in 2007-2017. Patient, tumor, procedure, and outcome data were analyzed. Twenty-eight patients (28 meningiomas) underwent successful preoperative meningioma embolization. The mean patient age ± SD was 56 ± 13 years, and 18 patients (64%) were women. The mean tumor size was 49 cm 3 . There were 1, 2, or 3 arterial pedicles embolized in 21 cases (75%), 6 cases (21%), and 1 case (4%), respectively. The embolized pedicles included branches of the middle meningeal artery in 19 cases (68%), the internal maxillary artery in 8 cases (29%), the ascending pharyngeal artery in 2 cases (7%), and the posterior auricular, ophthalmic, occipital, and anterior cerebral arteries in 1 case each (4%). The embolysates used were Onyx alone in 20 cases (71%), n-butyl cyanoacrylate alone in 3 cases (11%), coils/particles and Onyx/n-butyl cyanoacrylate in 2 cases each (7%), and Onyx and coils in 1 case (4%). The median degree of tumor devascularization was 60%. Significant neurologic morbidity occurred in 1 patient (4%) who developed symptomatic peritumoral edema after Onyx embolization. For appropriately selected skull base meningiomas supplied by dura mater-based arterial pedicles without distal cranial nerve supply, preoperative embolization with current embolysate technology affords substantial tumor devascularization with a low complication rate. Copyright © 2018 Elsevier Inc. All rights reserved.

Flash Pyrolysis of t-Butyl Hydroperoxide and Di-t-butyl Peroxide: Evidence of Roaming in the Decomposition of Organic Hydroperoxides.

PubMed

Jones, Paul J; Riser, Blake; Zhang, Jingsong

2017-10-19

Thermal decomposition of t-butyl hydroperoxide and di-t-butyl peroxide was investigated using flash pyrolysis (in a short reaction time of <100 μs) and vacuum-ultraviolet (λ = 118.2 nm) single-photon ionization time-of-flight mass spectrometry (VUV-SPI-TOFMS) at temperatures up to 1120 K and quantum computational methods. Acetone and methyl radical were detected as the predominant products in the initial decomposition of di-t-butyl peroxide via O-O bond fission. In the initial dissociation of t-butyl hydroperoxide, acetone, methyl radical, isobutylene, and isobutylene oxide products were identified. The novel detection of the unimolecular formation of isobutylene oxide, as supported by the computational study, was found to proceed via a roaming hydroxyl radical facilitated by a hydrogen-bonded intermediate. This new pathway could provide a new class of reactions to consider in the modeling of the low temperature oxidation of alkanes.

t-Butyl-Oxycarbonylated Diamines as Building Blocks for Isocyanate-Free Polyurethane/Urea Dispersions and Coatings.

PubMed

Ma, Shuang; Zhang, Huiyi; Sablong, Rafaël J; Koning, Cor E; van Benthem, Rolf A T M

2018-05-01

t-Butyl-oxycarbonylated diamines ("di-Boc-carbamates") are investigated as dicarbamate monomers for diamine/dicarbamate polymerizations. Polyureas (PUs) and polyurethanes (PURs) with high molecular weights are prepared from stoichiometric polymerizations of diamines or diols with N-N'-di-t-butyl-oxycarbonyl isophorone diamine (DiBoc-IPDC) using KOt-Bu as a catalyst, while gelation is observed when an excess of DiBoc-IPDC is used with respect to the diamines or diols. Stable dispersions are obtained from PUs and PURs with 3,3'-diamino-N-methyldipropylamine (DMDPA) as internal dispersing agent. The corresponding PU-based coatings exhibit superior mechanical properties and solvent resistances compared to the polyurethane urea coatings synthesized from diols, DiBoc-IPDC, and DMDPA. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Toxic effects of butyl elastomers on aerobic methane oxidation

NASA Astrophysics Data System (ADS)

Niemann, Helge; Steinle, Lea I.; Blees, Jan H.; Krause, Stefan; Bussmann, Ingeborg; Lehmann, Moritz F.; Treude, Tina

2013-04-01

Large quantities of the potent greenhouse gas methane are liberated into the water column of marine and lacustrine environments where it may be consumed by aerobic methane oxidising bacteria before reaching the atmosphere.The reliable quantification of aerobic methane oxidation (MOx) rates is consequently of paramount importance for estimating methane budgets and to understand the controls on water column methane cycling. A widely used set of methods for measuring MOx rates is based on the incubation of water samples during which the consumption of methane is monitored, for instance with radio-tracer assays. Typically, incubation vessels are sealed with butyl rubber stoppers because these elastomers are essentially impermeable for gases at the relevant time scales. We tested the effect of different stopper materials (unmodified- and halogenated butyl rubber) on MOx activity in environmental samples and in cultures of methane oxidising bacteria. MOx rates in samples sealed with unmodified butyl rubber were > 75% lower compared to parallel incubations with halogenated butyl rubber seals, suggesting inhibiting/toxic effects associated with the use of unmodified butyl elastomers. To further explore the cause of these effects, we analysed aqueous extracts of the different stoppers. Halogenated butyl rubber stoppers appeared to bleed off comparably little amounts of organics. In stark contrast, extracts of unmodified butyl rubber were contaminated with various organic compounds including potential bactericides such as benzyltoluenes, phenylalkanes and benzuothiazoles. We also found tetramethylthiourea, a scavenger of active oxygen species, which may inhibit the MOx pathway.

Comparison of Arterial Repair through the Suture, Suture with Fibrin or Cyanoacrylate Adhesive in Ex-Vivo Porcine Aortic Segment

PubMed Central

de Carvalho, Marcus Vinicius H.; Marchi, Evaldo; Lourenço, Edmir Américo

2017-01-01

Introduction Tissue adhesives can be used as adjacent to sutures to drop or avoid bleeding in cardiovascular operations. Objective To verify the efficiency of fibrin and cyanoacrylate adhesive to seal arterial sutures and if the adhesives penetrate through suture line to the inner of arteries. Methods 20 abdominal aorta segments of pigs were divided into two groups according to the adhesive which would be used as adjacent to the suture. In every arterial segment an arteriotomy was done, followed by a conventional artery closure. Afterwards a colloidal fluid was injected inside the arterial segment with a simultaneous intravascular pressure monitoring up to a fluid leakage through the suture. This procedure was repeated after application of one of the adhesives on the suture in order to check if the bursting pressure increases. The inner aorta segments also were analyzed in order to check if there was intraluminal adhesive penetration. Results In Suture 1 group, the mean arterial pressure sustained by the arterial suture reached 86±5.35 mmHg and after the fibrin adhesive application reached 104±11.96 (P<0.002). In the Suture 2 group, the mean arterial pressure sustained by the suture reached 83±2.67 mmHg and after the cyanoacrylate adhesive application reached 152±14.58 mmHg (P<0.002). Intraluminal adhesive penetration has not been noticed. Conclusion There was a significant rise in the bursting pressure when tissue adhesives were used as adjacent to arterial suture, and this rise was higher if the cyanoacrylate adhesive was used. In addition, the adhesives do not penetrate through the suture line into the arteries. PMID:29267611

Deep Circumflex Iliac Artery-Related Hemoperitoneum Formation After Surgical Drain Placement: Successful Transcatheter Embolization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Sang Woo; Chang, Seong-Hwan, E-mail: csh@kuh.ac.kr; Yun, Ik Jin

A 53-year-old woman with liver cirrhosis and hepatocellular carcinoma underwent living donor liver transplantation. After transplantation, her hemoglobin and hematocrit levels decreased to 6.3 g/dl and 18.5%, respectively, during the course of 3 days. A contrast-enhanced abdominal computed axial tomography (CAT) scan showed a hemoperitoneum in the right perihepatic space with no evidence of abdominal wall hematoma or pseudoaneurysm formation. An angiogram of the deep circumflex iliac artery (DCIA) showed extravasation of contrast media along the surgical drain, which had been inserted during the transplantation procedure. Transcatheter embolization of the branches of the DCIA was successfully performed using N-butyl cyanoacrylate.

A new postoperative otoplasty dressing technique using cyanoacrylate tissue adhesives.

PubMed

Vetter, Miriam; Foehn, Matthias; Wedler, Volker

2010-04-01

There are many techniques for cosmetic surgery of the ears and also many different procedures for postoperative treatment. The postoperative dressing is described as important for a successful outcome. We present our method of postoperative dressing in the form of liquid bonding. Cyanoacrylate tissue adhesives as liquid bonding agents are used for fixation of the pinna at the mastoid area. After 10-14 days the bonding can be easily removed. No huge dressings, tapes, or plasters are necessary. The patients are satisfied with the light dressing; they do not feel ashamed to appear in public. We have found this dressing technique to be simple and economical, especially because of the use of the bonding for skin closure before. It can be used after otoplasty with an anterior or a posterior approach.

HIGH LEVELS OF MONOAROMATIC COMPOUNDS LIMIT THE USE OF SOLID-PHASE MICROEXTRACTION OF METHYL TERTIARY BUTYL ETHER AND TERTIARY BUTYL ALCOHOL

EPA Science Inventory

Recently, two papers reported the use of solid-phase microextraction (SPME) with polydimethylsiloxane(PDMS)/Carboxen fibers to determine trace levels of methyl tertiary butyl ether (MTBE) and tertiary butyl alcohol (tBA) in water. Attempts were made to apply this technique to th...

A series of (E)-5-(arylideneamino)-1-tert-butyl-1H-pyrrole-3-carbonitriles and their reduction products to secondary amines: syntheses and X-ray structural studies.

PubMed

Macías, Mario A; Castillo, Juan Carlos; Portilla, Jaime

2018-01-01

An efficent access to a series of N-(pyrrol-2-yl)amines, namely (E)-1-tert-butyl-5-[(4-chlorobenzylidene)amino]-1H-pyrrole-3-carbonitrile, C 16 H 16 ClN 3 , (7a), (E)-1-tert-butyl-5-[(2,4-dichlorobenzylidene)amino]-1H-pyrrole-3-carbonitrile, C 16 H 15 Cl 2 N 3 , (7b), (E)-1-tert-butyl-5-[(pyridin-4-ylmethylene)amino]-1H-pyrrole-3-carbonitrile, C 15 H 16 N 4 , (7c), 1-tert-butyl-5-[(4-chlorobenzyl)amino]-1H-pyrrole-3-carbonitrile, C 16 H 18 ClN 3 , (8a), and 1-tert-butyl-5-[(2,4-dichlorobenzyl)amino]-1H-pyrrole-3-carbonitrile, C 16 H 17 Cl 2 N 3 , (8b), by a two-step synthesis sequence (solvent-free condensation and reduction) starting from 5-amino-1-tert-butyl-1H-pyrrole-3-carbonitrile is described. The syntheses proceed via isolated N-(pyrrol-2-yl)imines, which are also key synthetic intermediates of other valuable compounds. The crystal structures of the reduced compounds showed a reduction in the symmetry compared with the corresponding precursors, viz. Pbcm to P-1 from compound (7a) to (8a) and P2 1 /c to P-1 from compound (7b) to (8b), probably due to a severe change in the molecular conformations, resulting in the loss of planarity observed in the nonreduced compounds. In all of the crystals, the supramolecular assembly is controlled mainly by strong (N,C)-H...N hydrogen bonds. However, in the case of (7a)-(7c), C-H...Cl interactions are strong enough to help in the three-dimensional architecture, as observed in Hirshfeld surface maps.

Accelerated aging of EPDM and butyl elastomers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, M.H.

1996-06-01

This study was composed of three parts: a post cure study to optimize final properties of an ethylene-propylene-diene (EPDM) formulation, an accelerated aging study to compare the stress relaxation behavior of a butyl and an EPDM elastomer under compression, and a cursory evaluation of a new 70 Shore A EPDM. The optimum postcure for the EPDM was found to be 2 to 4 hours at 182{degrees}C in a vacuum. The EPDM was also shown to have superior aging characteristics compared to the butyl and is recommended for use instead of the butyl material. The physical properties for new 70 Shoremore » A EPDM are satisfactory, and the stress relaxation behavior was only slightly inferior to the other EPDM.« less

NMR analysis of t-butyl-catalyzed deuterium exchange at unactivated arene localities.

PubMed

Stack, Douglas E; Eastman, Rachel

2016-10-01

Regioselective labelling of arene rings via electrophilic exchange is often dictated by the electronic environment caused by substituents present on the aromatic system. Previously, we observed the presence of a t-butyl group, either covalently bond or added as an external reagent, could impart deuterium exchange to the unactivated, C1-position of estrone. Here, we provide nuclear magnetic resonance analysis of this exchange in a solvent system composed of 50:50 trifluoroacetic acid and D 2 O with either 2-t-butylestrone or estrone in the presence of t-butyl alcohol has shed insights into the mechanism of this t-butyl-catalyzed exchange. Fast exchange of the t-butyl group concurrent with the gradual reduction of the H1 proton signal in both systems suggest a mechanism involving ipso attack of the t-butyl position by deuterium. The reversible addition/elimination of the t-butyl group activates the H1 proton towards exchange by a mechanism of t-butyl incorporation, H1 activation and exchange, followed by eventual t-butyl elimination. Density functional calculations are consistent with the observation of fast t-butyl exchange concurrent with slower H1 exchange. The σ-complex resulting from ipso attack of deuterium at the t-butyl carbon was 6.6 kcal/mol lower in energy than that of the σ-complex resulting from deuterium attack at C1. A better understanding of the t-butyl-catalyzed exchange could help in the design of labelling recipes for other phenolic metabolites. Copyright © 2016 The Authors. Journal of Labelled Compounds and Radiopharmaceuticals published by John Wiley & Sons, Ltd.

Inducing PLA/starch compatibility through butyl-etherification of waxy and high amylose starch.

PubMed

Wokadala, Obiro Cuthbert; Emmambux, Naushad Mohammad; Ray, Suprakas Sinha

2014-11-04

In this study, waxy and high amylose starches were modified through butyl-etherification to facilitate compatibility with polylactide (PLA). Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy and wettability tests showed that hydrophobic butyl-etherified waxy and high amylose starches were obtained with degree of substitution values of 2.0 and 2.1, respectively. Differential scanning calorimetry, tensile testing, and scanning electron microscopy (SEM) demonstrated improved PLA/starch compatibility for both waxy and high amylose starch after butyl-etherification. The PLA/butyl-etherified waxy and high amylose starch composite films had higher tensile strength and elongation at break compared to PLA/non-butyl-etherified composite films. The morphological study using SEM showed that PLA/butyl-etherified waxy starch composites had a more homogenous microstructure compared to PLA/butyl-etherified high amylose starch composites. Thermogravimetric analysis showed that PLA/starch composite thermal stability decreased with starch butyl-etherification for both waxy and high amylose starches. This study mainly demonstrates that PLA/starch compatibility can be improved through starch butyl-etherification. Copyright © 2014 Elsevier Ltd. All rights reserved.

Biodegradation of di-n-butyl phthalate (DBP) by a novel endophytic Bacillus megaterium strain YJB3.

PubMed

Feng, Nai-Xian; Yu, Jiao; Mo, Ce-Hui; Zhao, Hai-Ming; Li, Yan-Wen; Wu, Bing-Xiao; Cai, Quan-Ying; Li, Hui; Zhou, Dong-Mei; Wong, Ming-Hung

2018-03-01

Phthalic acid esters (PAEs) are a group of recalcitrant and hazardous organic compounds that pose a great threat to both ecosystem and human beings. A novel endophytic strain YJB3 that could utilize a wide range of PAEs as the sole carbon and energy sources for cell growth was isolated from Canna indica root tissue. It was identified as Bacillus megaterium based on morphological characteristics and 16S rDNA sequence homology analysis. The degradation capability of the strain YJB3 was investigated by incubation in mineral salt medium containing di-n-butyl-phthalate (DBP), one of important PAEs under different environmental conditions, showing 82.5% of the DBP removal in 5days of incubation under the optimum conditions (acetate 1.2g·L -1 , inocula 1.8%, and temperature 34.2°C) achieved by two-step sequential optimization technologies. The DBP metabolites including mono-butyl phthalate (MBP), phthalic acid (PA), protocatechuic acid (PCA), etc. were determined by GC-MS. The PCA catabolic genes responsible for the aromatic ring cleavage of PCA in the strain YJB3 were excavated by whole-genome sequencing. Thus, a degradation pathway of DBP by the strain YJB3 was proposed that MBP was formed, followed by PA, and then the intermediates were further utilized till complete degradation. To our knowledge, this is the first study to show the biodegradation of PAEs using endophyte. The results in the present study suggest that the strain YJB3 is greatly promising to act as a competent inoculum in removal of PAEs in both soils and crops. Copyright © 2017 Elsevier B.V. All rights reserved.

Solvent extraction of tellurium from chloride solutions using tri-n-butyl phosphate: conditions and thermodynamic data.

PubMed

Li, Dongchan; Guo, Yafei; Deng, Tianlong; Chen, Yu-Wei; Belzile, Nelson

2014-01-01

The extractive separation of tellurium (IV) from hydrochloric acid media with tri-n-butyl phosphate (TBP) in kerosene was investigated. The dependence on the extraction of tellurium species, concentrations of tellurium and TBP, extraction time and stage, organic/aqueous ratio, and interferences from coexist metallic ions were examined and are discussed. Besides, the stripping agent and stripping time were also studied. It was found that the extraction reaction corresponds to the neutral complex formation mechanism and the extracted species is TeCl4 · 3TBP and that the extraction process is exothermic. The thermodynamic parameters of enthalpy (ΔH), entropy (ΔS), and free energy (ΔG) of the extraction process were evaluated at -26.2 kJ · mol(-1), -65.6 J · mol(-1) · K(-1), and -7.0 kJ · mol(-1), respectively at 293 K.

ONYX versus n-BCA for embolization of cranial dural arteriovenous fistulas.

PubMed

Rabinov, James David; Yoo, Albert J; Ogilvy, Christopher S; Carter, Bob S; Hirsch, Joshua A

2013-07-01

To evaluate the efficacy of n-butyl-2-cyanoacrylate (Trufill n-BCA) versus ethylene vinyl alcohol copolymer (ONYX) for the embolization of cranial dural arteriovenous fistulas (DAVF). Fifty-three consecutive patients with cranial dural AVF were treated with liquid embolic agents from November, 2003 to November, 2008. These 53 patients had 56 lesions treated with arterial embolization. Patients embolized to completion underwent follow-up angiography at 3 months to assess for durable occlusion. Twenty-one lesions were treated with n-BCA. Seven patients treated with n-BCA had initial angiographic occlusion of their DAVF, which were durable at 3 months. Six patients had adjunctive treatment with coils and/or polyvinyl alcohol particles, but none of these were occluded by endovascular treatment alone. Eleven patients underwent post-embolization surgery for closure of their DAVF. There was one death related to intractable status epilepticus at presentation. One patient developed a major stroke from venous sinus thrombosis after embolization. Thirty-five lesions were treated with ONYX in 34 patients. Twenty-nine patients treated with ONYX had initial angiographic occlusion of their DAVF by embolization alone. One patient had recurrence at 3 months and was re-treated out of 27 total follow-ups. Four patients underwent post-embolization surgical obliteration of their lesions. No deaths or major strokes occurred in this cohort. Initial angiographic occlusion (p=0.0004) and durable angiographic occlusion (p=0.0018) rates for embolization of cranial DAVF show a statistically significant higher efficacy with ONYX compared with n-BCA. Patients embolized with ONYX underwent surgery less frequently compared with those treated with n-BCA (p=0.0015).

Brown algae hydrolysis in 1-n-butyl-3-methylimidazolium chloride with mineral acid catalyst system.

PubMed

Malihan, Lenny B; Nisola, Grace M; Chung, Wook-Jin

2012-08-01

The amenability of three brown algal species, Sargassum fulvellum, Laminaria japonica and Undaria pinnatifida, to hydrolysis were investigated using the ionic liquid (IL), 1-n-butyl-3-methylimidazolium chloride ([BMIM]Cl). Compositional analyses of the brown algae reveal that sufficient amounts of sugars (15.5-29.4 wt.%) can be recovered. Results from hydrolysis experiments show that careful selection of the type of mineral acid as catalyst and control of acid loading could maximize the recovery of sugars. Optimal reaction time and temperature were determined from the kinetic studies on the sequential reducing sugar (TRS) formation and degradation. Optimal reaction times were determined based on the extent of furfurals formation as TRS degradation products. X-ray diffraction and environmental scanning electron microscopy confirmed the suitability of [BMIM]Cl as solvent for the hydrolysis of the three brown algae. Overall results show the potential of brown algae as renewable energy resources for the production of valuable chemicals and biofuels. Copyright © 2012 Elsevier Ltd. All rights reserved.

Cellulose pretreatment with 1-n-butyl-3-methylimidazolium chloride for solid acid-catalyzed hydrolysis.

PubMed

Kim, Soo-Jin; Dwiatmoko, Adid Adep; Choi, Jae Wook; Suh, Young-Woong; Suh, Dong Jin; Oh, Moonhyun

2010-11-01

This study has been focused on developing a cellulose pretreatment process using 1-n-butyl-3-methylimidazolium chloride ([bmim]Cl) for subsequent hydrolysis over Nafion(R) NR50. Thus, several pretreatment variables such as the pretreatment period and temperature, and the [bmim]Cl amount were varied. Additionally, the [bmim]Cl-treated cellulose samples were characterized by X-ray diffraction analysis, and their crystallinity index values including CI(XD), CI(XD-CI) and CI(XD-CII) were then calculated. When correlated with these values, the concentrations of total reducing sugars (TRS) obtained by the pretreatment of native cellulose (NC) and glucose produced by the hydrolysis reaction were found to show a distinct relationship with the [CI(NC)-CI(XD)] and CI(XD-CII) values, respectively. Consequently, the cellulose pretreatment step with [bmim]Cl is to loosen a crystalline cellulose through partial transformation of cellulose I to cellulose II and, furthermore, the TRS release, while the subsequent hydrolysis of [bmim]Cl-treated cellulose over Nafion(R) NR50 is effective to convert cellulose II to glucose. Copyright 2010 Elsevier Ltd. All rights reserved.

Determination of arsenic species in solid matrices utilizing supercritical fluid extraction coupled with gas chromatography after derivatization with thioglycolic acid n-butyl ester.

PubMed

Wang, Zhifeng; Cui, Zhaojie

2016-12-01

A method using derivatization and supercritical fluid extraction coupled with gas chromatography was developed for the analysis of dimethylarsinate, monomethylarsonate and inorganic arsenic simultaneously in solid matrices. Thioglycolic acid n-butyl ester was used as a novel derivatizing reagent. A systematic discussion was made to investigate the effects of pressure, temperature, flow rate of the supercritical CO 2 , extraction time, concentration of the modifier, and microemulsion on extraction efficiency. The application for real environmental samples was also studied. Results showed that thioglycolic acid n-butyl ester was an effective derivatizing reagent that could be applied for arsenic speciation. Using methanol as modifier of the supercritical CO 2 can raise the extraction efficiency, which can be further enhanced by adding a microemulsion that contains Triton X-405. The optimum extraction conditions were: 25 MPa, 90°C, static extraction for 10 min, dynamic extraction for 25 min with a flow rate of 2.0 mL/min of supercritical CO 2 modified by 5% v/v methanol and microemulsion. The detection limits of dimethylarsinate, monomethylarsonate, and inorganic arsenic in solid matrices were 0.12, 0.26, and 1.1 mg/kg, respectively. The optimized method was sensitive, convenient, and reliable for the extraction and analysis of different arsenic species in solid samples. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Tetra­butyl­ammonium tetra­kis­(trimethyl­silanolato-κO)ferrate(III)

PubMed Central

Hay, Michael; Staples, Richard; Lee, Andre

2012-01-01

In the title salt, (C16H36N)[Fe(C3H9OSi)4], the cation contains a central N atom bonded to four n-butyl alkyl groups in a tetra­hedral arrangement, while the anion contains a central FeIII atom tetra­hedrally coordinated by four trimethyl­silanolate ligands. PMID:22969479

Butyl benzyl phthalate (BBP)

Integrated Risk Information System (IRIS)

Butyl benzyl phthalate ; CASRN 85 - 68 - 7 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinog

Crystal structure of (2-{[(8-aminona-phthalen-1-yl)imino]-meth-yl}-4,6-di-tert-butyl-phenolato-κ3N,N',O)bromido-nickel(II).

PubMed

O'Brien, Patrick; Zeller, Matthias; Lee, Wei-Tsung

2018-04-01

The title compound, [NiBr(C 25 H 29 N 2 O)], contains an Ni II atom with a slightly distorted square-planar coordination environment defined by one O and two N atoms from the 2-{[(8-aminona-phthalen-1-yl)imino]-meth-yl}-4,6-di- tert -butyl-phenolate ligand and a bromide anion. The Ni-O and Ni-N bond lengths are slightly longer than those observed in the phenyl backbone counterpart, which can be attributed to the larger steric hindrance of the naphthyl group in the structure of the title compound. The mol-ecule as a whole is substanti-ally distorted, with both the planar naphthalene-1,8-di-amine and imino-meth-yl-phenolate substitutents rotated against the NiN 2 OBr plane by 38.92 (7) and 37.22 (8)°, respectively, giving the mol-ecule a twisted appearance. N-H⋯Br hydrogen bonds and N-H⋯C(π) contacts connect the mol-ecules into dimers, and additional C-H⋯Br contacts, C-H⋯π inter-actions, and an offset stacking inter-action between naphthyl units inter-connect these dimers into a three-dimensional network.

Superficial temporal arteriovenous fistula as a complication of rhytidectomy.

PubMed

Kominami, Shushi; Watanabe, Akira; Akimoto, Masahiro; Kobayashi, Shiro; Teramoto, Akira

2012-03-01

A 67-year-old woman who had undergone rhytidectomy 5 years before her presentation experienced increasing pulsatile tinnitus on the left side that had begun 2 years earlier. Angiography revealed a direct arteriovenous fistula between the superficial temporal artery and superficial temporal vein in front of her left ear. There was a scar from the earlier cosmetic surgery at the site. The fistula was embolized with N-butyl cyanoacrylate, and her tinnitus disappeared. We posit that the fistula was a complication of rhytidectomy and that a small arteriovenous fistula formed at the time of surgery and enlarged over time. This case indicates that arteriovenous fistulae can occur as a delayed complication of cosmetic surgery.

Solvent Extraction of Tellurium from Chloride Solutions Using Tri-n-butyl Phosphate: Conditions and Thermodynamic Data

PubMed Central

Li, Dongchan; Guo, Yafei; Deng, Tianlong; Chen, Yu-Wei

2014-01-01

The extractive separation of tellurium (IV) from hydrochloric acid media with tri-n-butyl phosphate (TBP) in kerosene was investigated. The dependence on the extraction of tellurium species, concentrations of tellurium and TBP, extraction time and stage, organic/aqueous ratio, and interferences from coexist metallic ions were examined and are discussed. Besides, the stripping agent and stripping time were also studied. It was found that the extraction reaction corresponds to the neutral complex formation mechanism and the extracted species is TeCl4 ·3TBP and that the extraction process is exothermic. The thermodynamic parameters of enthalpy (ΔH), entropy (ΔS), and free energy (ΔG) of the extraction process were evaluated at −26.2 kJ·mol−1, −65.6 J·mol−1 ·K−1, and −7.0 kJ·mol−1, respectively at 293 K. PMID:24757422

A novel synthesis of (E)-3-methylthio-3-substituted arylamino-2-cyanoacrylates under microwave irradiation.

PubMed

Ouyang, Guiping; Song, Baoan; Zhang, Huiping; Yang, Song; Jin, Linhong; Li, Qianzhu; Hu, Deyu

2005-10-31

A facile synthesis of 3-methylthio-3-arylamino-2-cyanoacrylates from 3,3-dimethylthioacrylate and aromatic amines or amino pyridines has been achieved in moderate to high yields (64.0% ~ 93.5%) in 30 minutes at 50 degrees C under microwave irradiation. This method is very simple and the reaction conditions are mild, environmentally friendly and more importantly, quick. In the 3-(4,5-dimethylthiazol- 2-yl)-2,5-diphenyltetrazolium bromide (MTT) test, some of the title compounds were found to possess good antiproliferation activity towards PC3 cells.

DI(N-BUTYL) PHTHALATE AND DIETHYLHEXYL PHTHALATE IN COMBINATION ALTER SEXUAL DIFFERENTIATION IN A CUMULATIVE MANNER AS A RESULT OF DEPRESSED FETAL TESTOSTERONE PRODUCTION AND INSL3 GENE EXPRESSION IN MALE RATS

EPA Science Inventory

Plasticizers di(n-butyl) phthalate (DBP) and diehtylhexyl phthalate (DEHP) have similar modes of action: in utero exposure reduces testosterone (T) production in fetal male rats, inhibits reproductive tract differentiation, and induces reproductive organ malformations. In utero e...

N-n-butyl haloperidol iodide ameliorates hypoxia/reoxygenation injury through modulating the LKB1/AMPK/ROS pathway in cardiac microvascular endothelial cells.

PubMed

Lu, Binger; Wang, Bin; Zhong, Shuping; Zhang, Yanmei; Gao, Fenfei; Chen, Yicun; Zheng, Fuchun; Shi, Ganggang

2016-06-07

Endothelial cells are highly sensitive to hypoxia and contribute to myocardial ischemia/reperfusion injury. We have reported that N-n-butyl haloperidol iodide (F2) can attenuate hypoxia/reoxygenation (H/R) injury in cardiac microvascular endothelial cells (CMECs). However, the molecular mechanisms remain unclear. Neonatal rat CMECs were isolated and subjected to H/R. Pretreatment of F2 leads to a reduction in H/R injury, as evidenced by increased cell viability, decreased lactate dehydrogenase (LDH) leakage and apoptosis, together with enhanced AMP-activated protein kinase (AMPK) and liver kinase B1 (LKB1) phosphorylation in H/R ECs. Blockade of AMPK with compound C reversed F2-induced inhibition of H/R injury, as evidenced by decreased cell viability, increased LDH release and apoptosis. Moreover, compound C also blocked the ability of F2 to reduce H/R-induced reactive oxygen species (ROS) generation. Supplementation with the ROS scavenger N-acetyl-L-cysteine (NAC) reduced ROS levels, increased cell survival rate, and decreased both LDH release and apoptosis after H/R. In conclusion, our data indicate that F2 may mitigate H/R injury by stimulating LKB1/AMPK signaling pathway and subsequent suppression of ROS production in CMECs.

Onyx versus nBCA and coils in the treatment of intracranial dural arteriovenous fistulas

PubMed Central

Choo, Douglas M

2016-01-01

Background and purpose Intracranial dural arteriovenous fistulas (DAVFs) with cortical venous drainage have significant morbidity and mortality. Complete closure of these lesions is necessary to reduce these risks. The purpose of our study was to compare the outcome of DAVFs treated with Onyx versus those treated with n-Butyl Cyanoacrylate (nBCA) and coil embolization in a case-control study. Compared with nBCA and coil embolization, we hypothesized that Onyx embolization for DAVF is safer and has a higher chance of complete obliteration, with no need for post-embolization surgery for the DAVF. Materials and methods From 1998 to 2015, 29 patients who had DAVFs were treated with endovascular embolization. Of these, 24 patients had imaging available for analysis. Successful closure rates, complications, and procedure time were compared between the embolization techniques. Results The chance of not requiring post-embolization surgery with Onyx (81.8%) was significantly higher (p = 0.005) than with nBCA (22.22%). The complication rate with Onyx (9.1%) tended to be lower compared with that of nBCA (22.22%; p = 0.37). Procedural time was not significantly different between Onyx (mean 267 minutes) and nBCA (mean 288 minutes) (p = 0.59). The odds ratio of a DAVF being treated with Onyx and then requiring no follow-up surgery was 17.5 (95% CI 1.97–155.4). Conclusion Our case-control study suggests that Onyx embolization is superior to nBCA and coil embolization in completely obliterating DAVFs, with higher odds of no post-embolization surgery. We also found that Onyx is safe for embolization of DAVFs, with no associated neurological mortality and morbidity. PMID:26748082

Onyx versus nBCA and coils in the treatment of intracranial dural arteriovenous fistulas.

PubMed

Choo, Douglas M; Shankar, Jai Jai Shiva

2016-04-01

Intracranial dural arteriovenous fistulas (DAVFs) with cortical venous drainage have significant morbidity and mortality. Complete closure of these lesions is necessary to reduce these risks. The purpose of our study was to compare the outcome of DAVFs treated with Onyx versus those treated with n-Butyl Cyanoacrylate (nBCA) and coil embolization in a case-control study. Compared with nBCA and coil embolization, we hypothesized that Onyx embolization for DAVF is safer and has a higher chance of complete obliteration, with no need for post-embolization surgery for the DAVF. From 1998 to 2015, 29 patients who had DAVFs were treated with endovascular embolization. Of these, 24 patients had imaging available for analysis. Successful closure rates, complications, and procedure time were compared between the embolization techniques. The chance of not requiring post-embolization surgery with Onyx (81.8%) was significantly higher (p = 0.005) than with nBCA (22.22%). The complication rate with Onyx (9.1%) tended to be lower compared with that of nBCA (22.22%; p = 0.37). Procedural time was not significantly different between Onyx (mean 267 minutes) and nBCA (mean 288 minutes) (p = 0.59). The odds ratio of a DAVF being treated with Onyx and then requiring no follow-up surgery was 17.5 (95% CI 1.97-155.4). Our case-control study suggests that Onyx embolization is superior to nBCA and coil embolization in completely obliterating DAVFs, with higher odds of no post-embolization surgery. We also found that Onyx is safe for embolization of DAVFs, with no associated neurological mortality and morbidity. © The Author(s) 2016.

Malignant biliary obstruction complicated by ascites: Closure of the transhepatic tract with cyanoacrylate glue after placement of an endoprosthesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cekirge, Saruhan; Akhan, Okan; Ozmen, Mustafa

1997-05-15

A new technique using cyanoacrylate glue is suggested for closing the transparenchymal tract following metallic endoprosthesis placement in a patient with malignant biliary obstruction complicated by ascites. With this technique, complications related to bile reflux through the transparenchymal tract would be avoided after transhepatic endoprosthesis placement in patients who have ascites. This technique would also be useful for avoiding bleeding following transhepatic portal venous puncture.

A comparison of 2-octyl cyanoacrylate with nylon for wound closure of knee arthroscopy portals.

PubMed

Imbuldeniya, A M; Rashid, A; Murphy, J P

2014-09-01

To compare the cosmetic results, complications and patient satisfaction of 2-octyl cyanoacrylate (Dermabond, Ethicon Inc. Somerville, NJ, USA), a liquid bonding agent, with 3-0 nylon sutures (Ethilon, Ethicon Inc) skin closure in two groups of patients undergoing elective knee arthroscopy at 6 weeks. The retrospective clinical audit recruited patients undergoing knee surgery for the first time between October 2010 and August 2011. The patients were either treated with the liquid bonding agent or nylon sutures. The patients in the bonding agent group were allowed to shower as normal on postoperative day one, while patients in the suture group kept their wounds dry for 2 weeks. Between the two groups (40 patients per group) there was no difference in the cosmetic outcome (p=0.285), patient satisfaction (p=0.29), pain scores (p=0.44) or wound complication rate (p<0.05). Patient satisfaction was high in both groups. Furthermore, 83.75% of all patients indicated they would prefer the liquid bonding closure over nylon sutures if undergoing the same procedure in the future as they could shower the next day and avoid suture removal. 2-octyl cyanoacrylate is safe to use in the short term in knee arthroscopy providing comparable results to nylon suture closure. Allowing patients to shower the next day appears to cause no adverse effects. The authors would like to state that they do not have any economic or social interest in any of the products used or mentioned. No grant or finance was received for this study, nor any input from other sources.

Biodegradation of di-n-Butyl Phthalate by Achromobacter sp. Isolated from Rural Domestic Wastewater.

PubMed

Jin, Decai; Kong, Xiao; Li, Yujie; Bai, Zhihui; Zhuang, Guoqiang; Zhuang, Xuliang; Deng, Ye

2015-10-26

A bacterial strain W-1, isolated from rural domestic wastewater, can utilize the environmental hormone di-n-butyl phthalate (DBP) as the sole carbon and energy source. The isolated bacterium species was confirmed to belong to the genus Achromobacter based on its 16S rRNA gene sequence. The results of substrate utilization tests showed that the strain W-1 could utilize other common phthalates and phenol. High-performance liquid chromatography analysis revealed that the optimal conditions for DBP degradation were pH 7.0, 35 °C, and an agitation rate of 175 rpm. Under these conditions, 500 mg/L of DBP was completely degraded within 30 h. The effects of heavy metals (50 mg/L Cu(2+) and 500 mg/L Pb(2+)) and surfactants (100 mg/L SDS and 500 mg/L Tween 20) on DBP degradation were investigated. The results demonstrated that Cu(2+) and SDS severely inhibited DBP degradation and Pb(2+) weakly inhibited DBP degradation, while Tween 20 greatly enhanced DBP degradation. Furthermore, phthalate degradation genes were found to be located on a plasmid present in Achromobacter sp. W-1.

A sutureless technique using cyanoacrylate adhesives when creating a stoma for extremely low birth weight infants.

PubMed

Nose, Satoko; Sasaki, Takashi; Saka, Ryuta; Minagawa, Kyoko; Okuyama, Hiroomi

2016-01-01

Intestinal perforation and necrotizing enterocolitis (NEC) are neonatal intestinal emergencies that are especially common in premature infants. While prompt surgical intervention, including stoma creation, is often required, the optimal surgical treatment has been controversial because of the substantial risks related to the stoma creation and management. The use of a tissue adhesive may have some advantages over the use of sutures when creating an intestinal stoma in extremely low birth weight (ELBW) infants. The purpose of this report was to present a novel approach for creating a stoma using a tissue adhesive in ELBW infants. A total of eight ELBW infants that underwent laparotomy with the creation of intestinal stomas using cyanoacrylate adhesive at our institution between 2009 and 2014 were enrolled. The clinical parameters, including the length of the operation, intra- and postoperative complications and the outcomes were evaluated. The median body weight and gestational age at birth were 630 g and 24.3 weeks, respectively. The median age at referral was 11.5 days. The median length of the procedure was 58.5 min, including the inspection and resection of the intestine. All procedures were completed without any intraoperative complications. There were no postoperative complications associated with the stoma. Two patients died of the associated septic status. Sutureless enterostomy using cyanoacrylate adhesive is a simple technique which has the potential to reduce the incidence of complications related to the intestinal stoma in ELBW infants.

Developing the Surface Chemistry of Transparent Butyl Rubber for Impermeable Stretchable Electronics.

PubMed

Vohra, Akhil; Carmichael, R Stephen; Carmichael, Tricia Breen

2016-10-11

Transparent butyl rubber is a new elastomer that has the potential to revolutionize stretchable electronics due to its intrinsically low gas permeability. Encapsulating organic electronic materials and devices with transparent butyl rubber protects them from problematic degradation due to oxygen and moisture, preventing premature device failure and enabling the fabrication of stretchable organic electronic devices with practical lifetimes. Here, we report a methodology to alter the surface chemistry of transparent butyl rubber to advance this material from acting as a simple device encapsulant to functioning as a substrate primed for direct device fabrication on its surface. We demonstrate a combination of plasma and chemical treatment to deposit a hydrophilic silicate layer on the transparent butyl rubber surface to create a new layered composite that combines Si-OH surface chemistry with the favorable gas-barrier properties of bulk transparent butyl rubber. We demonstrate that these surface Si-OH groups react with organosilanes to form self-assembled monolayers necessary for the deposition of electronic materials, and furthermore demonstrate the fabrication of stretchable gold wires using nanotransfer printing of gold films onto transparent butyl rubber modified with a thiol-terminated self-assembled monolayer. The surface modification of transparent butyl rubber establishes this material as an important new elastomer for stretchable electronics and opens the way to robust, stretchable devices.

Evaluating the use of octyl-2-cyanoacrylate in unilateral cleft lip repair

PubMed Central

Malhotra, Vijaylaxmy; Dayashankara Rao, J. K.; Arya, Varun; Sharma, Shalender; Singh, Sushil; Luthra, Payal

2016-01-01

Background: Facial cosmetic results are one of the most concerning issues for the parents who get their children operated for cleft lip. Moreover, the postoperative care of the surgical site, the discomfort associated with the suture removal, and additional visit for suture removal are other reasons which encourages one to use any new technologies that may replace the need for suture placement. In this study, we used octyl-2-cyanoacrylate, a tissue adhesive which offers a viable alternative to traditional techniques without compromising optimal wound closure. Objective: To perform a comprehensive comparison of the outcomes from the use of Dermabond in patients undergoing primary repair of congenital cleft lip ± palate anomalies. Materials and Methods: Twenty patients, in the age group of 3–18 months were treated surgically for unilateral cleft lip deformity using Millard rotation-advancement flap. Pre- and post-operative photographs of the patients were taken at 1 week, 2 week, 1 month, 6 months, and 1 year postoperatively and were evaluated using Vancouver scar scale which was given by Sullivan in 1990. Paired t-test was used for statistical analysis. Results: Increased vascularity (hyperemia) was seen in the 1st and 2nd week in 35% and 30% patients, respectively which gradually reduced to normal in subsequent follow-ups. The scar was flat in 85% of patients in 1st week, and the number decreased to 10% at the end of 1 year. No wound dehiscence was found in any patients. Statistical analysis showed that among all the follow-ups, only the difference between the first and second follow-ups. Comparison of the results of 1 week with all other follow-ups yielded no significant results. Conclusion: Octyl-2-cyanoacrylate can be used for cleft lip closure effectively. The procedure is relatively painless and quick. Added to this are benefits of protection from wound infection since the material is bacteriostatic. PMID:28356686

Immunity against mouse thymus-leukemia antigen (TL) protects against development of lymphomas induced by a chemical carcinogen, N-butyl-N-nitrosourea.

PubMed

Tsujimura, Kunio; Obata, Yuichi; Matsudaira, Yasue; Ozeki, Satoshi; Taguchi, Osamu; Nishida, Keiko; Okanami, Yuko; Akatsuka, Yoshiki; Kuzushima, Kiyotaka; Takahashi, Toshitada

2004-11-01

Mouse thymus-leukemia antigens (TL) are aberrantly expressed on T lymphomas in C57BL/6 (B6) and C3H/He (C3H) mice, while they are not expressed on normal T lymphocytes in these strains. When N-butyl-N-nitrosourea (NBU), a chemical carcinogen, was administered orally to B6 and C3H strains, lymphoma development was slower than in T3(b)-TL gene-transduced counterpart strains expressing TL ubiquitously as self-antigens, suggesting that anti-TL immunity may play a protective role. In addition, the development of lymphomas was slightly slower in C3H than in B6, which seems to be in accordance with the results of skin graft experiments indicating that both cellular and humoral immunities against TL were stronger in C3H than B6 mice. The interesting finding that B lymphomas derived from a T3(b)-TL transgenic strain (C3H background) expressing a very high level of TL were rejected in C3H, but not in H-2K(b) transgenic mice (C3H background), raises the possibility that TL-specific effector T cell populations are eliminated and/or energized to a certain extent by interacting with H-2K(b) molecules.

Crystal structure of bis­{μ-(E)-2-[(2-oxido­phenyl­imino)­meth­yl]quinolin-8-olato-κ4 O,N,N′,O′}bis­[di­butyl­tin(IV)

PubMed Central

Carlos, Camacho-Camacho; Naytzé, Ortiz-Pastrana; Ariadna, Garza-Ortiz; Irma, Rojas-Oviedo

2017-01-01

Condensation of 8-hy­droxy­quinoline-2-carbaldehyde with 2-amino­phenol gave the (E)-2-[(2-hy­droxy­phenyl­imino)­meth­yl]quinolin-8-ol derivative that reacted with di-n-butyl­tin oxide with release of H2O to yield the chelate title complex, [Sn2(C4H9)4(C16H10N2O2)2]. The compound crystallizes in the triclinic space group P-1, with two independent centrosymmetric dimers in the unit cell. Each features a typical pincer-type structure where the dianionic ligand is tetra­dentate, coordinating to the central tin atom through both phenolate oxygen atoms, as well as through the quinoline and imine N atoms. Each metal atom adopts a distorted penta­gonal–bipyramidal SnC2N2O3 coordination arising from the N,N′,O,O′-tetra­dentate deprotonated Schiff base, one bridging phenolate O atom of the neighbouring ligand and two butyl groups in the axial sites. PMID:28083122

40 CFR 721.1577 - 1,4-Benzenedicarboxylic acid, bis [4-(ethenyloxy) butyl] ester.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-(ethenyloxy) butyl] ester. 721.1577 Section 721.1577 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.1577 1,4-Benzenedicarboxylic acid, bis [4-(ethenyloxy) butyl] ester. (a... 1,4-benzenedicarboxylic acid, bis[4-(ethenyloxy) butyl] ester (PMN P-98-1163; CAS No. 117397-31-6...

40 CFR 721.1577 - 1,4-Benzenedicarboxylic acid, bis [4-(ethenyloxy) butyl] ester.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-(ethenyloxy) butyl] ester. 721.1577 Section 721.1577 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.1577 1,4-Benzenedicarboxylic acid, bis [4-(ethenyloxy) butyl] ester. (a... 1,4-benzenedicarboxylic acid, bis[4-(ethenyloxy) butyl] ester (PMN P-98-1163; CAS No. 117397-31-6...

Simultaneous analysis of tert-butylhydroquinone, tert-butylquinone, butylated hydroxytoluene, 2-tert-butyl-4-hydroxyanisole, 3-tert-butyl-4-hydroxyanisole, α-tocopherol, γ-tocopherol, and δ-tocopherol in edible oils by normal-phase high performance liquid chromatography.

PubMed

Li, Jun; Bi, Yanlan; Sun, Shangde; Peng, Dan

2017-11-01

A normal-phase high performance liquid chromatography method for the simultaneous determination of tert-butylhydroquinone, tert-butylquinone, butylated hydroxytoluene, 2-tert-butyl-4-hydroxyanisole, 3-tert-butyl-4-hydroxyanisole, α-tocopherol, γ-tocopherol, and δ-tocopherol in edible oils was investigated. A silica column was used to separate the analytes with the gradient elution. An ultraviolet-visible detector was set at dual wavelengths mode (280 and 310nm). The column temperature was 30°C. The analytes were directly extracted with methanol. Results showed that the normal-phase high performance liquid chromatography method performed well with wide liner ranges (0.10∼500.00μg/mL, R 2 >0.9998), low limits of detection and quantitation (below 0.40 and 1.21μg/mL, respectively), and good recoveries (81.38∼102.34% in soybean oils and 83.03∼100.79% in lard, respectively). The reduction of tert-butylquinone caused by the reverse-phase high performance liquid chromatography during the injection was avoided with the current normal-phase method. The two isomers of butylated hydroxyanisole can also be separated with good resolution. Copyright © 2017 Elsevier Ltd. All rights reserved.

Uranium extraction from TRISO-coated fuel particles using supercritical CO2 containing tri-n-butyl phosphate.

PubMed

Zhu, Liyang; Duan, Wuhua; Xu, Jingming; Zhu, Yongjun

2012-11-30

High-temperature gas-cooled reactors (HTGRs) are advanced nuclear systems that will receive heavy use in the future. It is important to develop spent nuclear fuel reprocessing technologies for HTGR. A new method for recovering uranium from tristructural-isotropic (TRISO-) coated fuel particles with supercritical CO(2) containing tri-n-butyl phosphate (TBP) as a complexing agent was investigated. TRISO-coated fuel particles from HTGR fuel elements were first crushed to expose UO(2) pellet fuel kernels. The crushed TRISO-coated fuel particles were then treated under O(2) stream at 750°C, resulting in a mixture of U(3)O(8) powder and SiC shells. The conversion of U(3)O(8) into solid uranyl nitrate by its reaction with liquid N(2)O(4) in the presence of a small amount of water was carried out. Complete conversion was achieved after 60 min of reaction at 80°C, whereas the SiC shells were not converted by N(2)O(4). Uranyl nitrate in the converted mixture was extracted with supercritical CO(2) containing TBP. The cumulative extraction efficiency was above 98% after 20 min of online extraction at 50°C and 25 MPa, whereas the SiC shells were not extracted by TBP. The results suggest an attractive strategy for reprocessing spent nuclear fuel from HTGR to minimize the generation of secondary radioactive waste. Copyright © 2012 Elsevier B.V. All rights reserved.

The Knock-Limited Performance of Fuel Blends Containing Spiropentane, Methylenecyclobutane, Di-Tert-Butyl Ether, Methyl Tert-Butyl Ether, and Triptane

NASA Technical Reports Server (NTRS)

Meyer, Carl L.

1946-01-01

Tests show that at inlet-air temperatures of 250 deg F and 100 deg F the knock-limited performance of the base fuel of blends, leaded with 4 ml TEL per gallon and containing 20 percent spiropentane, was reduced at fuel/air ratios below 0.085. The 20 percent methylenecyclobutane reduced the knock-limited power of the base fuel at fuel/air ratios below 0.112. Di-tert-butyl ether, methyl-tert-butyl ether, and triptane increased the knock-limited power of the base fuel at all fuel/air ratios and at both temperatures.

Methyl tert-butyl ether (MTBE)

Integrated Risk Information System (IRIS)

Methyl tert - butyl ether ( MTBE ) ; CASRN 1634 - 04 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments f

Disastrous Portal Vein Embolization Turned into a Successful Intervention

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dobrocky, Tomas, E-mail: tomas.dobrocky@insel.ch; Kettenbach, Joachim, E-mail: joachim.kettenbach@stpoelten.lknoe.at; Lopez-Benitez, Ruben, E-mail: Ruben.lopez@insel.ch

Portal vein embolization (PVE) may be performed before hemihepatectomy to increase the volume of future liver remnant (FLR) and to reduce the risk of postoperative liver insufficiency. We report the case of a 71-year-old patient with hilar cholangiocarcinoma undergoing PVE with access from the right portal vein using a mixture of n-butyl-2-cyanoacrylate and ethiodized oil. During the procedure, nontarget embolization of the left portal vein occurred. An aspiration maneuver of the polymerized plug failed; however, the embolus obstructing portal venous flow in the FLR was successfully relocated into the right portal vein while carefully bypassing the plug with a balloonmore » catheter, inflating the balloon, and pulling the plug into the main right portal vein.« less

40 CFR 721.1579 - 1,2,4-Benzenetricarboxylic acid, tris [4-(ethenyloxy) butyl] ester.

Code of Federal Regulations, 2011 CFR

2011-07-01

... [4-(ethenyloxy) butyl] ester. 721.1579 Section 721.1579 Protection of Environment ENVIRONMENTAL...-(ethenyloxy) butyl] ester. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as 1,2,4-benzenetricarboxylic acid, tris [4-(ethenyloxy) butyl] ester (PMN P...

40 CFR 721.1579 - 1,2,4-Benzenetricarboxylic acid, tris [4-(ethenyloxy) butyl] ester.

Code of Federal Regulations, 2010 CFR

2010-07-01

... [4-(ethenyloxy) butyl] ester. 721.1579 Section 721.1579 Protection of Environment ENVIRONMENTAL...-(ethenyloxy) butyl] ester. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as 1,2,4-benzenetricarboxylic acid, tris [4-(ethenyloxy) butyl] ester (PMN P...

Molecular Modeling and docking of Wheat Hydroquinone Glucosyl transferase by using Hydroquinone, Phenyl phosphorodiamate and n-(n butyl) Phosphorothiocic Triamide as Inhibitors

PubMed Central

Huma, Tayyaba; Maryam, Arooma; qamar, Tahir ul

2014-01-01

In agriculture high urease activity during urea fertilization causes substantial environmental and economical problems by releasing abnormally large amount of ammonia into the atmosphere which leads to plant damage as well as ammonia toxicity. All over the world, urea is the most widely applied nitrogen fertilizer. Due to the action of enzyme urease; urea nitrogen is lost as volatile ammonia. For efficient use of nitrogen fertilizer, urease inhibitor along with the urea fertilizer is one of the best promising strategies. Urease inhibitors also provide an insight in understanding the mechanism of enzyme catalyzed reaction, the role of various amino acids in catalytic activity present at the active site of enzyme and the importance of nickel to this metallo enzyme. By keeping it in view, the present study was designed to dock three urease inhibitors namely Hydroquinone (HQ), Phenyl Phosphorodiamate (PPD) and N-(n-butyl) Phosphorothiocic triamide (NBPT) against Hydroquinone glucosyltransferase using molecular docking approach. The 3D structure of Hydroquinone glucosyltransferase was predicted using homology modeling approach and quality of the structure was assured using Ramachandran plot. This study revealed important interactions among the urease inhibitors and Hydroquinone glucosyltransferase. Thus, it can be inferred that these inhibitors may serve as future anti toxic constituent against plant toxins. PMID:24748751

Molecular Modeling and docking of Wheat Hydroquinone Glucosyl transferase by using Hydroquinone, Phenyl phosphorodiamate and n-(n butyl) Phosphorothiocic Triamide as Inhibitors.

PubMed

Huma, Tayyaba; Maryam, Arooma; Qamar, Tahir Ul

2014-01-01

In agriculture high urease activity during urea fertilization causes substantial environmental and economical problems by releasing abnormally large amount of ammonia into the atmosphere which leads to plant damage as well as ammonia toxicity. All over the world, urea is the most widely applied nitrogen fertilizer. Due to the action of enzyme urease; urea nitrogen is lost as volatile ammonia. For efficient use of nitrogen fertilizer, urease inhibitor along with the urea fertilizer is one of the best promising strategies. Urease inhibitors also provide an insight in understanding the mechanism of enzyme catalyzed reaction, the role of various amino acids in catalytic activity present at the active site of enzyme and the importance of nickel to this metallo enzyme. By keeping it in view, the present study was designed to dock three urease inhibitors namely Hydroquinone (HQ), Phenyl Phosphorodiamate (PPD) and N-(n-butyl) Phosphorothiocic triamide (NBPT) against Hydroquinone glucosyltransferase using molecular docking approach. The 3D structure of Hydroquinone glucosyltransferase was predicted using homology modeling approach and quality of the structure was assured using Ramachandran plot. This study revealed important interactions among the urease inhibitors and Hydroquinone glucosyltransferase. Thus, it can be inferred that these inhibitors may serve as future anti toxic constituent against plant toxins.

40 CFR 721.4105 - Bicyclo[2.2.1]hept-2-ene, 5-butyl-.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Bicyclo[2.2.1]hept-2-ene, 5-butyl... Substances § 721.4105 Bicyclo[2.2.1]hept-2-ene, 5-butyl-. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as Bicyclo[2.2.1]hept-2-ene, 5-butyl- (PMN P...

40 CFR 721.4105 - Bicyclo[2.2.1]hept-2-ene, 5-butyl-.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Bicyclo[2.2.1]hept-2-ene, 5-butyl... Substances § 721.4105 Bicyclo[2.2.1]hept-2-ene, 5-butyl-. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as Bicyclo[2.2.1]hept-2-ene, 5-butyl- (PMN P...

Synthetic phenolic antioxidants, including butylated hydroxytoluene (BHT), in resin-based dental sealants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Wei; Kannan, Pranav; Xue, Jingchuan

Resin-based dental sealants (also referred to as pit-and-fissure sealants) have been studied for their contribution to bisphenol A (BPA) exposure in children. Nevertheless, little attention has been paid to the occurrence of other potentially toxic chemicals in dental sealants. In this study, the occurrence of six synthetic phenolic antioxidants (SPAs), including 2,6-di-tert-butyl-4-hydroxytoluene (BHT), 2,6-di-tert-butyl-4-(hydroxyethyl)phenol (BHT-OH), 3,5-di-tert-butyl-4-hydroxy-benzaldehyde (BHT-CHO), 2,6-di-tert-butylcyclohexa-2,5-diene-1,4-dione (BHT-Q), 3,5-di-tert-butyl-4-hydroxybenzoic acid (BHT-COOH) and 2-tert-butyl-4-methoxyphenol (BHA), was examined in 63 dental sealant products purchased from the U.S. market. BHT was found in all dental sealants at median and maximum concentrations of 56.8 and 1020 µg/g, respectively. The metabolites of BHT andmore » BHA were detected in 39–67% of samples, at concentration ranges of« less

Thermally Switchable Thin Films of an ABC Triblock Copolymer of Poly(n-butyl methacrylate)-poly(methyl methacrylate)-poly(2-fluoroethyl methacrylate)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Shanju; Liu, Zhan; Bucknall, David G.

2011-01-01

The thermo-responsive behavior of polymer films consisting of novel linear triblock copolymers of poly(n-butyl methacrylate)-poly(methyl methacrylate)-poly(2-fluoroethyl methacrylate) (PnBuMA-PMMA-P2FEMA) are reported using differential scanning calorimetry (DSC), atomic forcing microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and contacting angle (CA) measurements. The surface morphology, wettability and chemical structure of thin films of these triblock copolymers on silicon wafers as a function of temperature have been investigated. It has been shown that the wettability of the films is thermally switchable. Detailed structural analysis shows that thermo-responsive surface composition changes are produced. The underlying mechanism of the thermoresponsive behavior is discussed.

Effects of In Utero Exposure to Di-n-Butyl Phthalate on Testicular Development in Rat

PubMed Central

Ma, Tan; Yin, Xiaoqin; Han, Ruitong; Ding, Jie; Zhang, Huan; Han, Xiaodong

2017-01-01

Humans are inevitably exposed to ubiquitous phthalate esters (PAEs). In utero exposure to di-n-butyl phthalate (DBP) induces abnormal development of the testis and reproductive tract in male offspring, which correspond closely with the human condition of testicular dysgenesis syndrome (TDS)-like syndrome. However, the underlying mechanisms have not been elucidated in detail. In this study, pregnant rats were orally exposed to either corn oil (controls) or DBP at three different doses by gavage during Gestational Days 12.5–21.5. Pathological examinations were performed for toxicity evaluation. Proliferation and apoptosis related proteins (ras related dexamethasone induced 1 (Rasd1), mitogen-activated protein kinase kinases1/2 (MEK1/2), Bcl-2, and Bax) were measured for mechanisms exploration. The results showed that different doses of DBP caused male developmental and reproductive toxicity in rats, including the decrease of anogenital distance (AGD), the histological damage of testis, and apoptosis of seminiferous tubule cells. Our data suggested that DBP played chronic and continuous toxic roles on male reproductive system by disrupting expression of Rasd1 and MEK1/2 as well as Bcl-2/Bax ratio. Further research is warranted. PMID:29064414

NTP-CERHR Monograph on the Potential Human Reproductive and Developmental Effects of Di-n-Butyl Phthalate (DBP).

PubMed

2003-04-01

TThe National Toxicology Program (NTP) Center for the Evaluation of Risks to Human Reproduction (CERHR) conducted an evaluation of the potential for di-n-butyl phthalate (DBP) to cause adverse effects on reproduction and development in humans. DBP is one of 7 phthalate chemicals evaluated by the NTP CERHR Phthalates Expert Panel. These phthalates were selected for evaluation because of high production volume, extent of human exposures, use in children's products, and/or published evidence of reproductive or developmental toxicity. Unlike many phthalates, DBP is not currently used as a plasticizer in polyvinyl chloride plastics. DBP is a component of latex adhesives and is used in cosmetics and other personal care products, as a plasticizer in cellulose plastics, and as a solvent for dyes. The results of this evaluation on DBP are published in a NTP-CERHR monograph which includes: 1) the NTP Brief, 2) the Expert Panel Report on the Reproductive and Developmental Toxicity of Di-n-Butyl Phthalate, and 3) public comments received on the Expert Panel Report. As stated in the NTP Brief, the NTP reached the following conclusions regarding the possible effects of exposure to DBP on human development and reproduction. First, although DBP could possibly affect human reproduction and development if exposures are sufficiently high, the NTP concludes that there is negligible concern for reproductive toxicity in exposed adults. Second, the NTP concludes that there is minimal concern for developmental effects when pregnant women are exposed to DBP levels estimated by the panel (2-10 mug/kg body weight/day). There is no direct evidence that exposure of people to DBP adversely affects reproduction or development, but studies reviewed by the expert panel show that oral exposure to high doses of DBP (>/=100 mg/kg body weight/day) may adversely affect the prenatal and early postnatal development in rodents. Finally, based on exposure estimates in women of reproductive age, the NTP

Structural elucidation of 4-(cystein-S-yl)butyl glucosinolate from the leaves of Eruca sativa.

PubMed

Kim, Sun-Ju; Kawaharada, Chiami; Jin, Shigeki; Hashimoto, Makoto; Ishii, Gensho; Yamauchi, Hiroaki

2007-01-01

The structurally unique glucosinolate (GSL), 4-(cystein-S-yl)butyl GSL, was identified in the leaves of hydroponically-grown rocket salad (Eruca sativa Mill.). Its electrospray ionization mass spectrometry (ESI-MS)/MS spectrum indicated that this unusual GSL had a molecular weight of 414 as a desulfo (DS)-GSL, and a molecular formula of C(14)H(25)N(2)O(8)S(2) based on its negative ion matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) spectrum. For further confirmation, the 4-(cystein-S-yl)butyl DS-GSL was prepared with authentic L-Ser and purified dimeric 4-mercaptobutyl DS-GSL, and its chemical structure then confirmed by ESI-MS/MS data. It is named "glucorucolamine" as a trivial name from its ammonia sensitivity. This unique GSL was found to the greatest extent when rocket salad was grown in a 100% NH4+-N nutrient solution. Despite it clearly seems to reduce the detoxification of excess NH4+ in the leaves of rocket salad, present knowledge about the unique GSL is still far from being sufficient.

40 CFR 721.6920 - Butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Butyl acrylate, polymer with... NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.6920 Butyl... butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane...

Cholesterol-PEG comodified poly (N-butyl) cyanoacrylate nanoparticles for brain delivery: in vitro and in vivo evaluations.

PubMed

Hu, Xiao; Yang, Feifei; Liao, Yonghong; Li, Lin; Zhang, Lan

2017-11-01

This study investigated cholesterol-polyethylene glycol (PEG) comodified poly (ethyleneglycol)-poly (lactide) nanoparticles (CLS-PEG NPs) as a novel, biodegradable brain drug delivery system and included an evaluation of its in vitro and in vivo properties. To this end, coumarin-6 (C6), a fluorescent probe, was encapsulated into CLS-PEG NPs by an emulsion polymerization method. We reported that the use of CLS-PEG NPs led to a sustained drug release in vitro. Additionally, cell viability experiments confirmed their safety. The uptake and transport of CLS-PEG NPs, by bEnd.3 cells (an immortalized mouse brain endothelial cell line), was significantly higher than that of a control C6 solution. An investigation of the uptake mechanisms of different NP formulations demonstrated that cholesterol modifications may be the primary way to improve the efficiency of cellular uptake, wherein macropinocytosis may be the most important endocytic pathway in this process. An investigation of the transport mechanisms of CLS-PEG NPs also implicated macropinocytosis, energy and cholesterol in bEnd.3 cells lines. Following an intravenous (IV) administration to rats, pharmacokinetic experiments indicated that C6-loaded CLS-PEG NPs achieved sustained release for up to 12 h. In addition, IV delivery of CLS-PEG NPs appeared to significantly improve the ability of C6 to pass through the blood-brain barrier: the concentration of C6 found in the brain increased nearly 14.2-fold when C6 CLS-PEG NPs were used rather than a C6 solution. These in vitro and in vivo results strongly suggest that CLS-PEG NPs are a promising drug delivery system for targeting the brain, with low toxicity.

Reactivity of lithium n-butyl amidinates towards group 14 metal(II) chlorides providing series of hetero- and homoleptic tetrylenes.

PubMed

Chlupatý, Tomáš; Padělková, Zdeňka; Lyčka, Antonín; Brus, Jiří; Růžička, Aleš

2012-04-28

The new class of homo- and heteroleptic n-butyl-N,N'-disubstituted amidinato group 14 metal(II) complexes were prepared by salt elimination from starting lithium amidinates and metal(II) chlorides both in stoichiometric ratio 2:1 and 1:1, respectively. The target amidinates contain less bulky isopropyl or cyclohexyl as well as a sterically demanding aromatic substituent. Desired 1:1 Pb(II) complexes are not accessible by the described procedure. Ligand transfer from Pb to Sn is taking place if homoleptic Pb(II) compounds are reacted with SnCl(2). Prepared tetrylenes were characterized by (1)H, (13)C, (119)Sn and (207)Pb NMR spectroscopy in C(6)D(6) or THF-d(8). X-Ray diffraction studies of one heteroleptic Ge(II) monomeric where the coordination polyhedron of the three coordinated germanium atoms is a trigonal pyramid, two different dimeric structures of heteroleptic Sn(II) complexes, one amidine hydroiodide byproduct and the oxidation product of the heteroleptic chloro Sn(II) amidinate as a tetranuclear species with two Sn(IV) and two Sn(II) atoms in central Sn(2)O(2) planar ring were performed on appropriate single crystals. The dimer of one of the heteroleptic stannylenes reveals a new type of monomeric units connection, weak Sn-Cl contact and an interaction of the tin atom with delocalized N-C(C)-N system of the amidinato ligand of the second molecule. This journal is © The Royal Society of Chemistry 2012

Thermodynamic Equilibrium Solubility of Diethanolamine – N-Butyl-1-Methylpyrrolidinium Dicyanamide [DEABMPYRR DCA] Mixtures for Carbon Dioxide Capture

NASA Astrophysics Data System (ADS)

Salleh, R. M.; Jamaludin, S. N.

2018-05-01

Solubility data of carbon dioxide (CO2) in aqueous Diethanolamine (DEA) blended with pyrrolidinium-based ionic liquid: N-Butyl-1-Methylpyrrolidinium Dıcyanamıde [Bmpyrr][DCA] are presented at various temperatures (313.15K-333.15K) and pressure up to about 700 psi. The concentration of [Bmpyrr][DCA] ranges from 0-10wt% and 30-40wt% for DEA. The solubility of CO2 was evaluated by measuring the pressure drop in high pressure stirred absorption cell reactor. The CO2 loading in all studied mixtures increases with an increase in CO2 partial pressure and decreases with temperature. It was also found that the CO2 loading capacity decrease as the concentration of [Bmpyrr][DCA] increases. The experimental data were correlated as a function of temperature and CO2 partial pressure to predict the solubility of CO2 in the mixtures. It was found that the model predicted results in a good agreement with experimental value.

21 CFR 172.270 - Sulfated butyl oleate.

Code of Federal Regulations, 2010 CFR

2010-04-01

... edible vegetable oil using 1-butanol. Following sulfation, the reaction mixture is washed with water and neutralized with aqueous sodium or potassium hydroxide. Prior to sulfation, the butyl oleate reaction mixture...

The reclaiming of butyl rubber and in-situ compatibilization of thermoplastic elastomer by power ultrasound

NASA Astrophysics Data System (ADS)

Feng, Wenlai

This is a study of the continuous ultrasound aided extrusion process for the in-situ compatibilization of isotactic polypropylene (iPP)/ethylene-propylene diene rubber (EPDM) thermoplastic elastomer (TPE) using a newly developed ultrasonic treatment reactor. The rheological, mechanical properties and morphology of the TPE with and without ultrasonic treatment were studied. In-situ compatibilization in the ultrasonically treated blends was observed as evident by their more stable morphology after annealing, improved mechanical properties and IR spectra. The obtained results indicated that ultrasonic treatment induced the thermo-mechanical degradations and led to the possibility of enhanced molecular transport and chemical reactions at the interfaces. Processing conditions were established for enhanced in situ compatibilization of the PP/EPDM TPE. The ultrasonic treatments of butyl rubber gum and ultrasonic devulcanization of butyl rubber, tire-curing bladder during extrusion using a grooved barrel ultrasonic reactor were carried out. The ultrasonic treatment of gum caused degradation of the polymer main chain leading to lower molecular weight, broader molecular weight distribution, less unsaturation and changes in physical properties. The devulcanization of butyl rubber was successfully accomplished only at severe conditions of ultrasonic treatment. The mechanical properties of vulcanizates prepared from devulcanized butyl rubber are comparable to that of the virgin vulcanizate. The molecular characterization of sol fraction of devulcanized butyl rubber showed the devulcanization and degradation of butyl rubber occurred simultaneously. 1H NMR transverse relaxation was also used to study butyl rubber gum before and after ultrasonic treatment, and ultrasonically devulcanized unfilled butyl rubber. The T2 relaxation decays were successfully described using a two-component model. The recyclability of tire-curing bladder was also investigated. Gel fraction, crosslink

21 CFR 172.270 - Sulfated butyl oleate.

Code of Federal Regulations, 2011 CFR

2011-04-01

... transesterification of an edible vegetable oil using 1-butanol. Following sulfation, the reaction mixture is washed... oleate reaction mixture meets the following specifications: (1) Not less than 90 percent butyl oleate. (2...

Atomic layer deposition of zirconium silicate films using zirconium tetrachloride and tetra-n-butyl orthosilicate

NASA Astrophysics Data System (ADS)

Kim, Won-Kyu; Kang, Sang-Woo; Rhee, Shi-Woo; Lee, Nae-In; Lee, Jong-Ho; Kang, Ho-Kyu

2002-11-01

Atomic layer chemical vapor deposition of zirconium silicate films with a precursor combination of ZrCl4 and tetra-n-butyl orthosilicate (TBOS) was studied for high dielectric gate insulators. The effect of deposition conditions, such as deposition temperature, pulse time for purge and precursor injection on the deposition rate per cycle, and composition of the film were studied. At 400 °C, the growth rate saturated to 1.35 Å/cycle above 500 sccm of the argon purge flow rate. The growth rate, composition ratio ((Zr/Zr+Si)), and impurity contents (carbon and chlorine) saturated with the increase of the injection time of ZrCl4 and TBOS and decreased with the increased deposition temperature from 300 to 500 °C. The growth rate, composition ratio, carbon, and chlorine contents of the Zr silicate thin films deposited at 500 °C were 1.05 Å/cycle, 0.23, 1.1 at. %, and 2.1 at. %, respectively. It appeared that by using only zirconium chloride and silicon alkoxide sources, the content of carbon and chlorine impurities could not be lowered below 1%. It was also found that the incorporation rate of metal from halide source was lower than alkoxide source.

In Utero Exposure to Di( n-butyl)phthalate Induces Morphological and Biochemical Changes in Rats Postpuberty.

PubMed

Okayama, Yuya; Wakui, Shin; Wempe, Michael F; Sugiyama, Mitsuru; Motohashi, Masaya; Mutou, Tomoko; Takahashi, Hiroyuki; Kume, Eisuke; Ikegami, Hiroshi

2017-06-01

Pregnant Sprague-Dawley rats were orally administered di( n-butyl)phthalate (DBP; 100 mg/kg/day) on gestation days (GD) 12 to 21. We investigated the male offspring and probed morphological alterations in Sertoli cells at 7, 9, 14, and 17 weeks of age. Parameters assessed in this study included offspring number, sex ratios, body weights, testis weights, seminiferous tubule (ST) profile numbers and diameters, number of vimentin-labeled Sertoli cells, and both testosterone and follicle-stimulating hormone (FSH) levels. Testicular weight/body weight ratios and the numbers and diameters of ST in maximum transverse testicular sections were statistically similar at weeks 7 and 9; however, at weeks 14 and 17, they were statistically different and displayed higher BrdU-positive Sertoli cells/Sertoli cell ratios in the DBP treatment group. Noteworthily, the serum FSH levels were higher and testicular testosterone levels were lower in the DBP treatment group. To our knowledge, the present study is the first to report that in utero DBP exposure significantly increased Sertoli cell numbers and their cellular proliferation from postpuberty to adulthood, with a significant decrease in testicular testosterone and an increase in FSH.

Pelvic arteriovenous malformation treated by transarterial glue embolisation combining proximal balloon occlusion and devascularisation of multiple feeding arteries.

PubMed

Murakami, Kenji; Yamada, Takayuki; Kumano, Reiko; Nakajima, Yasuo

2014-06-06

We present a case of a 70-year-old man with abdominal aortic aneurysm and coincident pelvic arteriovenous malformation (AVM). Before the operation for the aneurysm, we embolised the pelvic AVM that had multiple feeding arteries and an aneurysmal-dilated draining vein. After decreasing the number of the feeding arteries by coil embolisation, an n-butyl-2-cyanoacrylate/lipiodol mixture (1:1) was injected into the prominent feeding artery and nidus with proximal balloon occlusion of the right internal iliac artery to decrease the flow to the nidus. The mixture (1:4-8) was also added for the finer feeding arteries that became apparent after the initial procedure to embolise the rest of the nidus. A follow-up study showed no contrast enhancement of the nidus and aneurysmal draining vein. 2014 BMJ Publishing Group Ltd.

21 CFR 182.3173 - Butylated hydroxytoluene.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Butylated hydroxytoluene. 182.3173 Section 182.3173 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives § 182...

21 CFR 582.3173 - Butylated hydroxytoluene.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Butylated hydroxytoluene. 582.3173 Section 582.3173 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives...

21 CFR 182.3169 - Butylated hydroxyanisole.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Butylated hydroxyanisole. 182.3169 Section 182.3169 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives § 182...

21 CFR 582.3169 - Butylated hydroxyanisole.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Butylated hydroxyanisole. 582.3169 Section 582.3169 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives...

Etude de l'effet du gonflement par les solvants sur les proprietes du caoutchouc butyle

NASA Astrophysics Data System (ADS)

Nohile, Cedrick

Polymers and in particular elastomers are widely used for personal protective equipment against chemical and biological hazards. Among them, butyl rubber is one of the most effective elastomers against chemicals. However, if this rubber has a very good resistance to a wide range of them, it is sensitive to non polar solvents. These solvents will easily swell the material and may dramatically affect its properties. This situation may involve a large risk for. butyl rubber protective equipment users. It is thus essential to improve the understanding of the effect of solvents on the properties of butyl rubber. The research that was carried out had two objectives: to identify the parameters controlling the resistance of butyl rubber to solvents and to study the effect of swelling on the properties of butyl rubber. The results show that the resistance of butyl rubber to solvents appears to be controlled by three main parameters: the chemical class of the solvent, its saturation vapor pressure and its molar volume. In addition, swelling affects butyl rubber mechanical properties in a permanent way. The effects can be attributed to the extraction of plasticizers by the solvent and to the degradation of the physico-chemical structure of the polymer network. This chemical degradation was linked to a phenomenon of differential swelling which seems to be controlled by the solvent flow inside the material. These results question some general beliefs within the field of protection against chemical risks. They also open new perspectives for the development of predictive tools relative to the behavior of butyl rubber in the presence of solvents

Nonspecific esterase reaction in hyperplastic urinary bladder epithelium induced by administration of N-butyl-N-(4-hydroxybutyl)nitrosamine, freezing and formalin instillation in rats.

PubMed Central

Akagi, A.; Otsuka, H.

1988-01-01

Chronological changes in nonspecific esterase (NSE) activity in hyperplasia of the bladder mucosa in Wistar rats induced by the administration of 0.05% N-butyl-N-(4-hydroxybutyl)nitrosamine (BBN) in their drinking water for up to 20 weeks and in reversible regenerative hyperplasia by freeze ulceration and 20% formalin instillation in the bladder were compared. In regenerative hyperplasia foci with strong NSE activity could not be proved throughout the experimental period, while the foci were detected in hyperplastic epithelium induced by BBN treatment for more than 3 weeks. The focus of NSE high activity persisted for 56 weeks after withdrawal of the carcinogen and the focus or area with the same NSE reaction appeared in papilloma and transitional cell carcinoma seen in weeks 7 to 20 of BBN treatment. The appearance of focal strong activity of NSE seemed to be a promising marker for the precursor lesions of bladder tumors. Short uniform, pleomorphic microvilli were observed on the cell surface of preneoplastic and carcinomatous lesions by BBN as well as on that of regenerative hyperplasia after freeze ulceration and formalin instillation. Images Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 PMID:3390388

To compare the effect of camylofin dihydrochloride (anafortin) with combination of valethamate bromide (epidosin) and hyoscine butyl-N-bormide (buscopan) on cervical dilation.

PubMed

Sarbhjit, Kaur; S K, Bajwa; Parmjit, Kaur; Surinder, Bhupal

2013-09-01

Various drugs have been tried to hasten cervical dilatation so that problems and hazards of prolonged labour both for the mother and fetus are minimised without increasing maternal or perinatal mortality and morbidity. To compare the effect of camylofin dihydrochloride with combination of valethemate bromide (epidosin) & hyoscine N butyl bromide (buscopan) on cervical dilatation, evaluate the incidence of side effects and to look for neonatal outcome. Two hundred cases were included of primigravidae or multigravidae with gestational age of 37 to 40 weeks with full term with single foetus,vertex presentation and no major antenatal complication of women in labour, admitted to labour room of gynaecology Department, Government Medical College, Patiala, India, was studied and divided into 2 groups Group A-100 Cases - labour accelerated by camylofin dihydro chloride and Group B-100 Cases-labour accelerated by valethemate bromide (epidosin) and hyoscine N butyl bromide. The mean age, parity and period of gestation in Anafortan group was 24.13 ± 3.60 years, 49% primigravidae and 51% multigravidae and 38.81 ± 1.09 weeks, while that in Epidosin + Buscopan group was 24.43 ± 3.42 years, 45% primigravidae and 51% multigravidae and 38.94 ± 1.09 weeks respectively. The difference was insignificant and both the groups were comparable. Mean duration of Active phase of 1st stage of labor was 141.40 ± 55.41 minutes in Anafortan group and 181.46 ± 75.58 minutes in Epidosin + Buscopan group. Mean rate of cervical dilatation according to active phase of first stage was 3.33 ± 1.03 cm/hours in Anafortan group and 2.69 ± 1.03 cm/hr in Epidosin + Buscopan group. The difference between the two groups is highly significant (p < 0.01) thus it is concluded that Anafortan hastened the rate of cervical dilatation.

In Vivo Assessment of Chitosan/ β-Glycerophosphate as a New Liquid Embolic Agent

PubMed Central

Wang, Y.; Xu, N.; Luo, Q.; Li, Y.; Sun, L.; Wang, H.; Xu, K.; Wang, B.; Zhen, Y.

2011-01-01

Summary We sought to assess the feasibility of using thermosensitive chitosan/β-glycerophosphate for embolotherapy. The renal arteries in nine rabbits were embolized with chitosan/β-glycerophosphate. The animals were studied angiographically and sacrificed at one week (n = 3), four weeks (n = 3), and eight weeks (n = 3) after embolotherapy. Histology was obtained at these three time points. Delivery of chitosan/β-glycerophosphate was successful in all cases. Complete occlusion was achieved in all cases. No recanalization was observed in the follow-up angiograms. No untoward inflammatory reactions were observed in the target renal arteries and infarcted kidneys during the histological examinations. Our preliminary feasibility evaluation in rabbit renal arteries indicates that C/GP is a satisfactory embolization agent. PMID:21561564

tert-Butyl 6-amino-5-cyano-2-(2-meth­oxy­eth­yl)nicotinate

PubMed Central

Chen, Yi-Ning; Zhao, Xing-Dong; Deng, Jie; Li, Qin-Geng

2012-01-01

The title compound, C14H19N3O3, was synthesized by the reaction of 3-meth­oxy­propionitrile, tert-butyl bromo­acetate and eth­oxy­methyl­enemalononitrile. In the crystal, N—H⋯O hydrogen bonds link the mol­ecules into chains propagating along the b axis. PMID:22737103

REDUCTIVE ACTIVATION OF DIOXYGEN FOR DEGRADATION OF METHYL TERT-BUTYL ETHER BY BIFUNCTION

EPA Science Inventory

Bifunctional aluminum is prepared by sulfating aluminum metal with sulfuric acid. The use of bifunctional aluminum to degrade methyl tert-butyl ether (MTBE) in the presence of dioxygen has been examined using batch systems. Primary degradation products were tert-butyl alcohol, ...

IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (Etbe) ...

EPA Pesticide Factsheets

The IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) was released for external peer review in June 2017. EPA’s Science Advisory Board’s (SAB) Chemical Assessment Advisory Committee (CAAC) will conduct a peer review of the scientific basis supporting the ETBE assessment and release a final report of their review. Information regarding the peer review can be found on the SAB website. EPA is conducting an Integrated Risk Information System (IRIS) health assessment for Ethyl Tertiary Butyl Ether (ETBE). The outcome of this project is a Toxicological Review and IRIS Summary for ETBE that will be entered into the IRIS database.

Mid- and long-term outcomes of carotid-cavernous fistula endovascular management with Onyx and n-BCA: experience of a single tertiary center.

PubMed

Barber, Sean M; Rangel-Castilla, Leonardo; Zhang, Y Jonathan; Klucznik, Richard; Diaz, Orlando

2015-10-01

Endovascular therapy is the preferred treatment for most carotid-cavernous fistulas (CCFs). Early reports have documented excellent initial clinical and radiographic outcomes after embolization of CCFs with Onyx or n-butyl cyanoacrylate (n-BCA), but little evidence is available about the long-term durability of this technique. To characterize the long-term durability of CCF liquid embolization. The authors retrospectively reviewed a database of 24 CCFs in 21 consecutive patients who underwent Onyx or n-BCA embolization of a CCF from 2006 to 2013 at our institution. A total of 25 Onyx or n-BCA embolization procedures were attempted and 24 successfully completed during the study, resulting in complete or near-complete occlusion by the end of the study in all 24 CCFs (obliteration success, 100%). Attempted embolization in a single CCF failed initially, but was performed successfully at a later date by a different approach. None of the 24 CCFs recanalized, regrew, or required any further treatment subsequent to Onyx or n-BCA embolization throughout a mean 12.4 months of angiographic follow-up (range 1-36 months). Clinically significant complications were seen in three embolization procedures, including cranial nerve palsies (n=1), embolic infarct (n=1), and intraperitoneal hemorrhage (n=1). Early evidence has indicated that endovascular embolization with Onyx is relatively safe and effective at achieving an initial angiographic cure for CCFs. Results of our series suggest that angiographic and clinical outcomes of Onyx and n-BCA embolization remain stable at mid- and long-term follow-up. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Expression of an alkane monooxygenase (alkB) gene and methyl tert-butyl ether co-metabolic oxidation in Pseudomonas citronellolis.

PubMed

Bravo, Ana Luisa; Sigala, Juan Carlos; Le Borgne, Sylvie; Morales, Marcia

2015-04-01

Pseudomonas citronellolis UAM-Ps1 co-metabolically transforms methyl tert-butyl ether (MTBE) to tert-butyl alcohol with n-pentane (2.6 mM), n-octane (1.5 mM) or dicyclopropylketone (DCPK) (4.4 mM), a gratuitous inducer of alkane hydroxylase (AlkB) activity. The reverse transcription quantitative real-time PCR was used to quantify the alkane monooxygenase (alkB) gene expression. The alkB gene was expressed in the presence of n-alkanes and DCPK and MTBE oxidation occurred only in cultures when alkB was transcribed. A correlation between the number of alkB transcripts and MTBE consumption was found (ΜΤΒΕ consumption in μmol = 1.44e(-13) x DNA copies, R(2) = 0.99) when MTBE (0.84 mM) was added. Furthermore, alkB was cloned and expressed into Escherichia coli and the recombinant AlkB had a molecular weight of 42 kDa. This is the first report where the expression of alkB is related to the co-metabolic oxidation of MTBE.

The tert-butyl cation on zeolite Y: A theoretical and experimental study

NASA Astrophysics Data System (ADS)

Rosenbach, Nilton, Jr.; dos Santos, Alex P. A.; Franco, Marcelo; Mota, Claudio J. A.

2010-01-01

The structure and energy of the tert-butyl cation on zeolite Y were calculated at ONIOM(MP2(FULL)/6-31G( d, p):MNDO) level. The results indicated that the tert-butyl cation is a minimum and lies between 40 and 51 kJ mol -1 above in energy to the tert-butoxide, depending on the level of calculation. Both species are stabilized through hydrogen bonding interactions with the framework oxygen atoms. Experimental data of nucleophilic substitution of tert-butylchloride and bromide over NaY impregnated with NaCl or NaBr give additional support for the formation of the tert-butyl cation as a discrete intermediate on zeolite Y, in agreement with the calculations.

Regioisomer-Free C 4h β-Tetrakis(tert-butyl)metallo-phthalocyanines: Regioselective Synthesis and Spectral Investigations.

PubMed

Iida, Norihito; Tanaka, Kenta; Tokunaga, Etsuko; Takahashi, Hiromi; Shibata, Norio

2015-04-01

Metal β-tetrakis(tert-butyl)phthalocyanines are the most commonly used phthalocyanines due to their high solubility, stability, and accessibility. They are commonly used as a mixture of four regioisomers, which arise due to the tert-butyl substituent on the β-position, and to the best of our knowledge, their regioselective synthesis has yet to be reported. Herein, the C 4h -selective synthesis of β-tetrakis(tert-butyl)metallophthalocyanines is disclosed. Using tetramerization of α-trialkylsilyl phthalonitriles with metal salts following acid-mediated desilylation, the desired metallophthalocyanines were obtained in good yields. Upon investigation of regioisomer-free zinc β-tetrakis(tert-butyl)phthalocyanine using spectroscopy, the C 4h single isomer described here was found to be distinct in the solid state to zinc β-tetrakis(tert-butyl)phthalocyanine obtained by a conventional method.

Efficient nitrogen incorporation in GaAs using novel metal organic As-N precursor di-tertiary-butyl-arsano-amine (DTBAA)

NASA Astrophysics Data System (ADS)

Sterzer, E.; Beyer, A.; Duschek, L.; Nattermann, L.; Ringler, B.; Leube, B.; Stegmüller, A.; Tonner, R.; von Hänisch, C.; Stolz, W.; Volz, K.

2016-04-01

III/V semiconductors containing small amounts of nitrogen (N; dilute nitrides) are discussed in the context of different solar cell and laser applications. The efficiency of these devices is negatively affected by carbon (C) incorporation, which comes either from the direct C-N bond in the N precursor unsymmetrical 1,1-dimethylhydrazine (UDMHy) used conventionally or from the alkyl groups of the conventional precursors for gallium (Ga), indium and arsenic (As) containing carbon. This C is incorporated together with the N due to the strength of the C-N bond. A further important issue in dilute nitride growth is the very low N incorporation efficiency in the crystal from UDMHy, which can be as little as 1% of the N supplied in the gas phase. Therefore, new metal organic chemicals have to be synthesized and their growth characteristics and suitability for dilute nitride growth have to be explored. This work presents the chemical di-tertiary-butyl-arsano-amine (DTBAA), which was synthesized, purified and tested as an N precursor for metal organic vapor phase epitaxy (MOVPE). Computational investigations show β-hydrogen and isobutane elimination to be the main reaction channel in the gas phase with high reaction barriers and absence of small fragments containing C as products. The loss of N via N2, as in UDMHy, can be excluded for unimolecular reactions of DTBAA. The Ga(NAs)/GaAs heterostructures were grown by MOVPE as initial test material and a systematic N incorporation study is presented in this paper. It is shown that high quality Ga(NAs) can be grown using DTBAA. The N incorporation was confirmed by high resolution X-ray diffraction and photoluminescence studies. All samples grown exhibit as grown room temperature photoluminescence and smooth surface morphologies. Furthermore, DTBAA shows extremely high N incorporation efficiency, which makes this molecule a very promising candidate for further research into dilute nitride material growth.

PREPARATION OF BLOCK COPOLYMERS OF POLY(STYRENE) AND POLY(T-BUTYL ACRYLATE) OF VARIOUS MOLECULAR WEIGHTS AND ARCHITECTURES BY ATOM TRANSFER RADICAL POLYMERIZATION. (R826735)

EPA Science Inventory

Block copolymers of polystyrene and poly(t-butyl acrylate) were prepared using atom transfer radical polymerization techniques. These polymers were synthesized with a CuBr/N,N,N,NResearch of obtaining TiO2 by sol-gel method using titanium isopropoxide TIP and tetra-n-butyl orthotitanate TNB

NASA Astrophysics Data System (ADS)

Gómez de Salazar, J. M.; Nutescu Duduman, C.; Juárez Gonzalez, M.; Palamarciuc, I.; Barrena Pérez, M. I.; Carcea, I.

2016-08-01

Titanium dioxide crystallises in three polymorphs: anatase, rutile and brookite. Rutile is most stable form of the TiO2 polymorphs. In this paper we concentrate on obtaining rutile and anatase, both used in various applications. The chosen method is sol-gel, which is a reliable method used for obtaining titanium oxides. We prepared titanium dioxide with using titanium isopropoxide (TIP) with chemical construction (C12H28O4Ti) and tetra-n-butyl orthotitanate (TNB) with chemical construction (C16H36O4Ti). The experiments were carried out in order to compare the results of the samples with similar reaction conditions, but with different precursors, thus concluding which precursor gives best results. Using different analysis techniques as X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Thermogravimetric Analysis (TGA) we characterised the samples morphologically and structurally.

Hypothyroidism protects di(n-butyl) phthalate-induced reproductive organs damage in Sprague-Dawley male rats.

PubMed

Lee, Ena; Kim, Hee Jin; Im, Ji Young; Kim, Jeonga; Park, Hyeyoung; Ryu, Ju Young; Lee, Jaewon; Shim, Keun Aee; Jung, Kee Kyung; Han, Soon Young; Lee, Byung Mu; Kim, Seung Hee; Kim, Hyung Sik

2008-08-01

This study examined the deleterious effects of di(n-butyl) phthalate (DBP) on the male reproductive organs in hypothyroid rats. Hypothyroidism was induced in prepubertal male rats (28 days of age) by an intraperitonial (i.p.) injection of 10 mg/kg/day propylthiouracil (PTU) for 30 days. DBP (100 and 500 mg/kg/day) was administered by oral gavages to the intact or hypothyroid rats for 30 days. The body weight of the PTU-treated rats was significantly lower than the control group. The total triiodothyronine (T3) and thyroxine (T4) serum level was lower, and the thyroid-stimulating hormone (TSH) level was higher in the hypothyroid rats than in the control rats. The DBP treatment rats showed significantly lower testes, epididymides, seminal vesicles, and ventral prostate weights than the untreated rats. The hypothyroid rats had significantly higher thyroid weights and lower adrenal glands weights than the control rats. The histomorphological examination showed diffused Leydig cells hyperplasias and germ cells loss in the DBP (500 mg/kg)-treated rats, whereas these effects were mild in the DBP-treated hypothyroid rats. The serum levels of monobutyl phthalate (MBP) were significantly lower in PTU-induced hypothyroid rats than in the DBP-treated rats. This data suggests that the hypothyroid status might offer some protection from male reproductive organ toxicity caused by a disturbance in the metabolic activation of the parent compound, DBP.

Densities, Excess Molar Volumes, Viscosities, and Refractive Indices of Binary Mixtures of n-Butyl Acetate with 1-Chloroalkanes (C4-C8) at 298.15 K

NASA Astrophysics Data System (ADS)

Iloukhani, H.; Khanlarzadeh, K.; Rakhshi, M.

2011-03-01

Densities, viscosities, and refractive indices of binary mixtures of n-butyl acetate (1) +1-chlorobutane (2), +1-chloropentane (2), +1-chlorohexane (2), +1-chloroheptane (2), and +1-chlorooctane (2) were measured at 298.15 K for the liquid region and at ambient pressure for the whole composition range. The excess molar volumes V E were calculated from experimental densities. McAllister's three-body interaction, and Hind and Grunberg-Nissan models are used for correlating the viscosity of binary mixtures. The experimental data of binaries are analyzed to discuss the nature and strength of intermolecular interactions in these mixtures.

Butylated hydroxyanisole alters rat 5α-reductase and 3α-hydroxysteroid dehydrogenase: Implications for influences of neurosteroidogenesis.

PubMed

Guo, Jingjing; Li, Lili; Zhou, Songyi; Su, Ying; Li, Xiaoheng; Sun, Jianliang; Ge, Ren-Shan

2017-07-13

Butylated hydroxyanisole is a synthetic antioxidant. It may affect the function of the nerve system. The objective of the present study is to investigate the direct effects of butylated hydroxyanisole on rat brain neurosteroidogenic 5α-reductase 1 (SRD5A1), 3α-hydroxysteroid dehydrogenase (AKR1C14), and retinol dehydrogenase 2 (RDH2). Rat SRD5A1, AKR1C14, and RDH2 were cloned and expressed in COS1 cells, and the effects of butylated hydroxyanisole on these enzyme activities were measured. Butylated hydroxyanisole inhibited SRD5A1, AKR1C14, and RDH2 with IC 50 values of 4.731±0.079μM, 5.753±0.073μM, and over 100μM, respectively. Butylated hydroxyanisole is a competitive inhibitor for both SRD5A1 and AKR1C14. Docking analysis shows that butylated hydroxyanisole binds to the dihydrotestosterone-binding site of AKR1C14. In conclusion, butylated hydroxyanisole is a potent inhibitor of SRD5A1 and AKR1C14, thus reducing the formation of active neurosteroids. Copyright © 2017 Elsevier B.V. All rights reserved.

Carbon dioxide capture via aqueous N-methyldiethanolamine (MDEA)-1-butyl-3-methylimidazolium acetate ([bmim][Ac]) hybrid solvent

NASA Astrophysics Data System (ADS)

Hailegiorgis, Sintayehu Mekuria; Khan, Saleem Nawaz; Abdolah, Nur Hanis H.; Ayoub, Muhammad; Tesfamichael, Aklilu

2017-10-01

In this study, aqueous hybrid solvents from a mixture of aqueous N-methyldiethanolamine (MDEA) and 1-butyl-3-methylimidazolium acetate, [bmim][Ac] as ionic liquids (ILs) were formulated at different mass ratio. In each aqueous hybrid solvents, the concentrations of MDEA were kept constant at 30 wt%. In the hybrid solvents, the solubility of CO2 was investigated at [bmim][Ac] concentration of 10 wt% and 20 wt%, respectively and results were compared with pure aqueous MDEA solvent. It was observed that the solubility of CO2 is significantly improved in the hybrid solvent as compared to the solubility of CO2 in pure aqueous MDEA solvent. However, increasing the concentration of [bmim][Ac] from 10 wt% to 20 wt% has a negative effect on the solubility of CO2 due to viscosity effect. It was also observed that hybrid solvents with 10 wt% [bmim][Ac] has better CO2 loading capacity. Increasing pressure from 10 bar to 20 bar has demonstrated an increase in CO2 absorption capacity as well as CO2 absorption rate. Hybrid solvents prepared from amine and imidazolium ILs will be a promising solvent in the capturing of CO2.

Formation of Germa-ketenimine on the Ge(100) Surface by Adsorption of tert-Butyl Isocyanide.

PubMed

Shong, Bonggeun; Yoo, Jong Suk; Sandoval, Tania E; Bent, Stacey F

2017-06-28

Reactions of the (100) surfaces of Ge and Si with organic molecules have been generally understood within the concept of "dimers" formed by the 2 × 1 surface reconstruction. In this work, the adsorption of tert-butyl isocyanide on the Ge(100)-2 × 1 surface at large exposures is investigated under ultrahigh vacuum conditions. A combination of infrared spectroscopy, X-ray photoelectron spectroscopy, and temperature-programmed desorption experiments along with dispersion-corrected density functional theory calculations is used to determine the surface products. Upon adsorption of a dense monolayer of tert-butyl isocyanide, a product whose structure resembles a germa-ketenimine (N=C=Ge) with σ donation toward and π back-donation from the Ge(100) surface appears. Formation of this structure involves divalent-type surface Ge atoms that arise from cleavage of the Ge(100)-2 × 1 surface dimers. Our results reveal an unprecedented class of reactions of organic molecules at the Ge(100) surface.

Synthesis of Metal Nanoparticles and Metal Fluoride Nanoparticles from Metal Amidinate Precursors in 1-Butyl-3-Methylimidazolium Ionic Liquids and Propylene Carbonate.

PubMed

Schütte, Kai; Barthel, Juri; Endres, Manuel; Siebels, Marvin; Smarsly, Bernd M; Yue, Junpei; Janiak, Christoph

2017-02-01

Decomposition of transition-metal amidinates [M{MeC(N i Pr) 2 } n ] [M(AMD) n ; M=Mn II , Fe II , Co II , Ni II , n= 2; Cu I , n= 1) induced by microwave heating in the ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF 4 ]), 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF 6 ]), 1-butyl-3-methylimidazolium trifluoromethanesulfonate (triflate) ([BMIm][TfO]), and 1-butyl-3-methylimidazolium tosylate ([BMIm][Tos]) or in propylene carbonate (PC) gives transition-metal nanoparticles (M-NPs) in non-fluorous media (e.g. [BMIm][Tos] and PC) or metal fluoride nanoparticles (MF 2 -NPs) for M=Mn, Fe, and Co in [BMIm][BF 4 ]. FeF 2 -NPs can be prepared upon Fe(AMD) 2 decomposition in [BMIm][BF 4 ], [BMIm][PF 6 ], and [BMIm][TfO]. The nanoparticles are stable in the absence of capping ligands (surfactants) for more than 6 weeks. The crystalline phases of the metal or metal fluoride synthesized in [BMIm][BF 4 ] were identified by powder X-ray diffraction (PXRD) to exclusively Ni- and Cu-NPs or to solely MF 2 -NPs for M=Mn, Fe, and Co. The size and size dispersion of the nanoparticles were determined by transmission electron microscopy (TEM) to an average diameter of 2(±2) to 14(±4) nm for the M-NPs, except for the Cu-NPs in PC, which were 51(±8) nm. The MF 2 -NPs from [BMIm][BF 4 ] were 15(±4) to 65(±18) nm. The average diameter from TEM is in fair agreement with the size evaluated from PXRD with the Scherrer equation. The characterization was complemented by energy-dispersive X-ray spectroscopy (EDX). Electrochemical investigations of the CoF 2 -NPs as cathode materials for lithium-ion batteries were simply evaluated by galvanostatic charge/discharge profiles, and the results indicated that the reversible capacity of the CoF 2 -NPs was much lower than the theoretical value, which may have originated from the complex conversion reaction mechanism and residue on the surface of the nanoparticles.

Effect of hyoscine-N-butyl bromide rectal suppository on labor progress in primigravid women: randomized double-blind placebo-controlled clinical trial.

PubMed

Makvandi, Somayeh; Tadayon, Mitra; Abbaspour, Mohammadreza

2011-04-15

To determine the effects of hyoscine-N-butyl bromide (HBB) rectal suppository on labor progress in primigravid women. A randomized double-blind placebo-controlled clinical trial was carried out on 130 primigravid women admitted for spontaneous labor. The women were recruited based on the inclusion and exclusion criteria and randomized into the experimental (n=65) and control group (n=65). In the beginning of the active phase of labor, 20 mg of HBB rectal suppository was administered to the experimental group, while a placebo suppository was administered to the control group. Cervical dilatation and duration of active phase and second stage of labor were recorded. The rate of cervical dilatation was 2.6 cm/h in the experimental and 1.5 cm/h in the control group (P<0.001). The active phase and the second stage of labor were significantly shorter in the experimental group (P=0.001 and P<0.001, respectively). There was no significant difference between the two groups in the fetal heart rate, maternal pulse rate, blood pressure, and the APGAR score 1 and 5 minutes after birth. Use of HBB rectal suppository in the active management of labor can shorten both the active phase and second stage of labor without significant side-effects.

Simultaneous Clostridial fermentation, lipase-catalyzed esterification, and ester extraction to enrich diesel with butyl butyrate.

PubMed

van den Berg, Corjan; Heeres, Arjan S; van der Wielen, Luuk A M; Straathof, Adrie J J

2013-01-01

The recovery of 1-butanol from fermentation broth is energy-intensive since typical concentrations in fermentation broth are below 20 g L(-1). To prevent butanol inhibition and high downstream processing costs, we aimed at producing butyl esters instead of 1-butanol. It is shown that it is possible to perform simultaneously clostridial fermentation, esterification of the formed butanol to butyl butyrate, and extraction of this ester by hexadecane. The very high partition coefficient of butyl butyrate pulls the esterification towards the product side even at fermentation pH and relatively low butanol concentrations. The hexadecane extractant is a model diesel compound and is nontoxic to the cells. If butyl butyrate enriched diesel can directly be used as car fuel, no product recovery is required. A proof-of-principle experiment for the one-pot bio-ester production from glucose led to 5 g L(-1) butyl butyrate in the hexadecane phase. The principle may be extended to a wide range of esters, especially to longer chain ones. Copyright © 2012 Wiley Periodicals, Inc.

(GaIn)(NAs) growth using di-tertiary-butyl-arsano-amine (DTBAA)

NASA Astrophysics Data System (ADS)

Sterzer, E.; Ringler, B.; Nattermann, L.; Beyer, A.; von Hänisch, C.; Stolz, W.; Volz, K.

2017-06-01

III/V semiconductors containing small amounts of Nitrogen (N) are very interesting for a variety of optoelectronic applications. Unfortunately, the conventionally used N precursor 1,1-dimethylhydrazine (UDMHy) has an extremely low N incorporation efficiency in GaAs when grown using metal organic vapor phase epitaxy. Alloying Ga(NAs) with Indium (In) even leads to an exponential reduction of N incorporation. The huge amount of UDMHy in turn changes drastically the growth conditions. Furthermore, the application of this material is still hampered by the large carbon incorporation, most probably originating from the metal organic precursors. Hence, novel precursors for dilute nitride growth are needed. This paper will show (GaIn)(NAs) growth studies with the novel precursor di-tertiary-butyl-arsano-amine in combination with tri-ethyl-gallium and tri-methyl-indium. We show an extremely high N incorporation efficiency in the In containing (GaIn)(NAs). The (GaIn)(NAs) samples investigated in this study have been examined using high resolution X-Ray diffraction, room temperature photoluminescence and atomic force microscope measurements as well as secondary ion mass spectrometry.

Topical and systemic immunoreaction triggered by intravesical chemotherapy in an N-butyl-N-(4-hydroxybutyl) nitorosamine induced bladder cancer mouse model

PubMed Central

Nakai, Yasushi; Tanaka, Nobumichi; Fujimoto, Kiyohide

2017-01-01

Intravesical bacillus Calmette-Guerin (BCG) treatment is the most common therapy to prevent progression and recurrence of non-muscle invasive bladder cancer (NMIBC). Although the immunoreaction elicited by BCG treatment is well documented, those induced by intravesical treatment with chemotherapeutic agents are much less known. We investigated the immunological profiles caused by mitomycin C, gemcitabine, adriamycin and docetaxel in the N-butyl-N-(4-hydroxybutyl) nitrosamine (BBN)-induced orthotopic bladder cancer mouse model. Ninety mice bearing orthotopic bladder cancer induced by BBN were randomly divided into six groups and treated with chemotherapeutic agents once a week for four weeks. After last treatment, bladder and serum samples were analyzed for cell surface and immunological markers (CD4, CD8, CD56, CD204, Foxp3, and PD-L1) using immunohistochemistry staining. Serum and urine cytokine levels were evaluated by ELISA. All chemotherapeutic agents presented anti-tumor properties similar to those of BCG. These included changes in immune cells that resulted in fewer M2 macrophages and regulatory T cells around tumors. This result was compatible with those in human samples. Intravesical chemotherapy also induced systemic changes in cytokines, especially urinary interleukin (IL)-17A and granulocyte colony stimulating factor (G-CSF), as well as in the distribution of blood neutrophils, lymphocytes, and monocytes. Our findings suggest that intravesical treatment with mitomycin C and adriamycin suppresses protumoral immunity while enhancing anti-tumor immunity, possibly through the action of specific cytokines. A better understanding of the immunoreaction induced by chemotherapeutic agents can lead to improved outcomes and fewer side effects in intravesical chemotherapy against NMIBC. PMID:28406993

A Case of Ruptured Aneurysm of the Proper Esophageal Artery with Symptomatic Mediastinal Hematoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Jiajia; Sato, Yusuke, E-mail: yusuke@doc.med.akita-u.ac.jp; Takahashi, Satoshi

Mediastinal aneurysms are rare but potentially life-threatening. Among these, bronchial artery aneurysms are most frequently reported, whereas up to now aneurysms of the proper esophageal artery had never been reported. A 69-year-old woman was referred to our hospital for treatment of a massive mediastinal hematoma. Enhanced computed tomography and selective proper esophageal arteriography revealed a 5-mm aneurysm in the proper esophageal artery that arises from the thoracic aorta at the Th8 level and has an anastomotic branch with the bronchial artery peripherally. Transcatheter arterial embolization was successfully performed using a mixture of N-butyl cyanoacrylate and lipiodol (1:3 ratio, 0.3 ml). Post-embolizationmore » angiography showed no filling into the aneurysm. The patient recovered with no complications and was discharged on the 25th post-procedure day.« less

Embolization of a spinal dural arteriovenous fistula with ethylene-vinyl alcohol copolymer (Onyx) using a dual-lumen microballoon catheter and buddy wire technique.

PubMed

Nakae, Ryuta; Nagaishi, Masaya; Hyodo, Akio; Suzuki, Kensuke

2017-01-01

N -butyl 2-cyanoacrylate (NBCA) remains the standard embolic agent for spinal dural arteriovenous fistula (SDAVF) treatment. Treatment of SDAVF with ethylene-vinyl alcohol copolymer (Onyx, ev3-Covidien, Irvine CA, USA) is currently not well established. Although several cases have reported the use of Onyx to embolize an intracranial dural arteriovenous fistula using a dual-lumen microballoon catheter, Onyx embolization of an SDAVF using a dual-lumen microballoon catheter has not been reported. We treated a 57-year-old man with an SDAVF using a dual-lumen microballoon catheter and buddy wire technique to perform transarterial Onyx embolization via the left sixth intercostal artery. Onyx embolization using a dual-lumen microballoon catheter was effective. Furthermore, the buddy wire technique was useful for providing rigid support of the microcatheter in a narrow and tortuous intercostal artery.

Embolization of a spinal dural arteriovenous fistula with ethylene-vinyl alcohol copolymer (Onyx) using a dual-lumen microballoon catheter and buddy wire technique

PubMed Central

Nakae, Ryuta; Nagaishi, Masaya; Hyodo, Akio; Suzuki, Kensuke

2017-01-01

Background: N-butyl 2-cyanoacrylate (NBCA) remains the standard embolic agent for spinal dural arteriovenous fistula (SDAVF) treatment. Treatment of SDAVF with ethylene-vinyl alcohol copolymer (Onyx, ev3-Covidien, Irvine CA, USA) is currently not well established. Although several cases have reported the use of Onyx to embolize an intracranial dural arteriovenous fistula using a dual-lumen microballoon catheter, Onyx embolization of an SDAVF using a dual-lumen microballoon catheter has not been reported. Case Description: We treated a 57-year-old man with an SDAVF using a dual-lumen microballoon catheter and buddy wire technique to perform transarterial Onyx embolization via the left sixth intercostal artery. Conclusions: Onyx embolization using a dual-lumen microballoon catheter was effective. Furthermore, the buddy wire technique was useful for providing rigid support of the microcatheter in a narrow and tortuous intercostal artery. PMID:28840070

To Compare the Effect of Camylofin Dihydrochloride (Anafortin) with Combination of Valethamate Bromide (Epidosin) and Hyoscine Butyl-N-Bormide (Buscopan) on Cervical Dilation

PubMed Central

Sarbhjit, Kaur; S.K., Bajwa; Parmjit, Kaur; Surinder, Bhupal

2013-01-01

Background: Various drugs have been tried to hasten cervical dilatation so that problems and hazards of prolonged labour both for the mother and fetus are minimised without increasing maternal or perinatal mortality and morbidity. Aims and Objectives: To compare the effect of camylofin dihydrochloride with combination of valethemate bromide (epidosin) & hyoscine N butyl bromide (buscopan) on cervical dilatation, evaluate the incidence of side effects and to look for neonatal outcome. Material and Methods: Two hundred cases were included of primigravidae or multigravidae with gestational age of 37 to 40 weeks with full term with single foetus,vertex presentation and no major antenatal complication of women in labour, admitted to labour room of gynaecology Department, Government Medical College, Patiala, India, was studied and divided into 2 groups Group A–100 Cases – labour accelerated by camylofin dihydro chloride and Group B–100 Cases–labour accelerated by valethemate bromide (epidosin) and hyoscine N butyl bromide. Observations: The mean age, parity and period of gestation in Anafortan group was 24.13 ± 3.60 years, 49% primigravidae and 51% multigravidae and 38.81 ± 1.09 weeks, while that in Epidosin + Buscopan group was 24.43 ± 3.42 years, 45% primigravidae and 51% multigravidae and 38.94 ± 1.09 weeks respectively. The difference was insignificant and both the groups were comparable. Results: Mean duration of Active phase of 1st stage of labor was 141.40 ± 55.41 minutes in Anafortan group and 181.46 ± 75.58 minutes in Epidosin + Buscopan group. Mean rate of cervical dilatation according to active phase of first stage was 3.33 ± 1.03 cm/hours in Anafortan group and 2.69 ± 1.03 cm/hr in Epidosin + Buscopan group. The difference between the two groups is highly significant (p < 0.01) thus it is concluded that Anafortan hastened the rate of cervical dilatation. PMID:24179892

Anaerobic degradation of methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA).

PubMed

Finneran, K T; Lovley, D R

2001-05-01

The potential for anaerobic degradation of methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA) was investigated in laboratory incubations of sediments from a petroleum-contaminated aquifer and in aquatic sediments. The addition of humic substances (HS) stimulated the anaerobic degradation of MTBE in aquifer sediments in which Fe(III) was available as an electron acceptor. This is attributed to the fact that HS and other extracellular quinones can stimulate the activity of Fe(III)-reducing microorganisms by acting as an electron shuttle between Fe(III)-reducing microorganisms and insoluble Fe(III) oxides. MTBE was not degraded in aquifer sediments without Fe(III) and HS. [14C]-MTBE added to aquatic sediments adapted for anaerobic MTBE degradation was converted to 14CO2 in the presence or absence of HS or the HS analog, anthraquione-2,6-disulfonate. Unamended aquatic sediments produced 14CH4 as well as 14CO2 from [14C]-MTBE. The aquatic sediments also rapidly consumed TBA under anaerobic conditions and converted [14C]-TBA to 14CH4 and 14CO2. An adaptation period of ca. 250-300 days was required prior to the most rapid anaerobic MTBE degradation in both sediment types, whereas TBA was metabolized in the aquatic sediments without a lag. These results demonstrate that, under the appropriate conditions, MTBE and TBA can be degraded in the absence of oxygen. This suggests that it may be possible to design strategies for the anaerobic remediation of MTBE in petroleum-contaminated subsurface environments.

21 CFR 172.270 - Sulfated butyl oleate.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Sulfated butyl oleate. 172.270 Section 172.270 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Coatings, Films and Related Substances...

Aquatic Life Criteria - Methyl Tertiary-Butyl Ether (MTBE)

EPA Pesticide Factsheets

Information pertaining to the 1999 Acute and Chronic Ambient Aquatic Life Water Quality Criteria for Methyl Tertiary-Butyl Ether (MTBE) for freshwater and salt water. Information includes the safe levels of MTBE that should protect the majority of species.

Methyl t-Butyl Ether Mineralization in Surface-Water Sediment Microcosms under Denitrifying Conditions

USGS Publications Warehouse

Bradley, P.M.; Chapelle, F.H.; Landmeyer, J.E.

2001-01-01

Mineralization of [U-14C] methyl t-butyl ether (MTBE) to 14CO2 without accumulation of t-butyl alcohol (TBA) was observed in surface-water sediment microcosms under denitrifying conditions. Methanogenic activity and limited transformation of MTBE to TBA were observed in the absence of denitrification. Results indicate that bed sediment microorganisms can effectively degrade MTBE to nontoxic products under denitrifying conditions.

40 CFR 721.6920 - Butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Butyl acrylate, polymer with... acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane. (a... butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane...

40 CFR 721.6920 - Butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Butyl acrylate, polymer with... acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane. (a... butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane...

40 CFR 721.6920 - Butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Butyl acrylate, polymer with... acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane. (a... butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane...

40 CFR 721.6920 - Butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Butyl acrylate, polymer with... acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane. (a... butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane...

Effect of di-n-butyl phthalate (DBP) on the fruit quality of cucumber and the health risk.

PubMed

Wang, Lei; Sun, Xin; Chang, Qin; Tao, Yue; Wang, Lihua; Dong, Junwei; Lin, Yulong; Zhang, Ying

2016-12-01

Di-n-butyl phthalate (DBP) widely used as plastic films' plasticizer, can cause agricultural pollution which is of increasing concern because of the food safety issues. Cucumber ( Cucumis sativus Linn.), commonly cultured in greenhouse, was exposed to DBP stress to gain more information about the ecological risk of DBP in this study. Changes of DBP residues and fruit quality of cucumber at different DBP concentrations (0, 5, 10, 20, 40 mg/kg of dry soil) were investigated in pot experiments using an agricultural soil under greenhouse condition, respectively. DBP residue in cucumber fruits ranged from 0.5326 to 1.8938 mg/kg, and the quality of cucumber fruits (organic acids, vitamin C, soluble protein, and soluble sugar) were influenced by DBP stress. Moreover, the health risk assessment was evaluated by estimate daily intakes (EDI) and the target hazard quotient (THQ) was analyzed. Under 40 mg/kg DBP condition, the highest value of EDI was 2.49 μg/kg bw/day and the THQ ranged from 0.000700 to 0.0249. Although the risk of DBP in cucumber fruits was lower than the threshold limit value of risk, the potential health risk was not a negligible issue.

PRESENTED AT THE TRIANGLE CONSORTIUM FOR REPRODUCTIVE BIOLOGY MEETING ON 2/11/06: DI(N-BUTYL) PHTHALATE AND DIETHYLHEXYL PHTHALATE IN COMBINATION ALTER SEXUAL DIFFERENTIATION IN A CUMULATIVE MANNER AS A RESULT OF DEPRESSED FETAL TESTOSTERONE PRODUCTION AND INSL3 GENE EXPRESSION IN MALE RATS

EPA Science Inventory

Plasticizers di(n-butyl) phthalate (DBP) and diehtylhexyl phthalate (DEHP) have similar modes of action: in utero exposure reduces testosterone (T) production in fetal male rats, inhibits reproductive tract differentiation, and induces reproductive organ malformations. In utero e...

Mechanism of resistance to cyhalofop-butyl in Chinese sprangletop (Leptochloa chinensis (L.) Nees).

PubMed

Yu, Jiaxing; Gao, Haitao; Pan, Lang; Yao, Zhenwei; Dong, Liyao

2017-11-01

Chinese sprangletop (Leptochloa chinensis (L.) Nees) is a serious grass weed in rice paddies. In some areas, L. chinensis has become resistant to the herbicide cyhalofop-butyl because of its frequent and extensive use over the past five years. In this study, whole-plant dose-response assays were conducted, and a L. chinensis population (ZHYH) had a 75.8-fold resistance index to cyhalofop-butyl. Molecular analyses revealed that this resistance was attributed to a tryptophan (Trp)-2027-to-cysteine (Cys) substitution in the CT domain of the ACCase gene. To our knowledge, this is the first report revealing the mechanism underlying cyhalofop-butyl resistance in L. chinensis. Furthermore, a derived cleaved amplified polymorphic (dCAPS) assay was developed to rapidly detect the Trp-2027-Cys mutation. Of the 100 ZHYH plants analyzed, 52 were heterozygous mutants and 48 were susceptible homozygous plants. In addition, the cyhalofop-butyl-resistant L. chinensis was cross-resistant to aryloxyphenoxypropionate and phenylpyrazoline herbicides, but not to cyclohexanedione, acetolactate synthase-inhibiting, protoporphyrinogen oxidase, and urea herbicides, and had only slight resistance to the hormonal herbicide quinclorac. Copyright © 2016 Elsevier Inc. All rights reserved.

The oxidation of 2,6-di-tert-butyl-4-methylphenol

USGS Publications Warehouse

Yohe, G.R.; Dunbar, J.E.; Pedrotti, R.L.; Scheidt, F.M.; Lee, F.G.H.; Smith, E.C.

1956-01-01

The products formed in the oxidation of 2,6-di-tert-butyl-4-methylphenol with oxygen and sodium hydroxide at about 100?? are 3,5-di-tert-butyl-4-hydroxybenzaldehyde, trimethylacetic acid, an acidic compound C14H22O3, and probably 2,6-di-tert-butylbenzoquinone (which was actually isolated in the similar oxidation of the above-named benzaldehyde), in addition to compounds previously reported. Some of the properties of C14H22O3 are given, and the oxidation of it to 2,3-di-tert-butylsuccinic anhydride is described, but assignment of structure is reserved pending the completion of more experimental work.

N-n-butyl Haloperidol Iodide Protects against Hypoxia/Reoxygenation Injury in Cardiac Microvascular Endothelial Cells by Regulating the ROS/MAPK/Egr-1 Pathway

PubMed Central

Lu, Shishi; Zhang, Yanmei; Zhong, Shuping; Gao, Fenfei; Chen, Yicun; Li, Weiqiu; Zheng, Fuchun; Shi, Ganggang

2017-01-01

Endothelium dysfunction induced by reactive oxygen species (ROS) is an important initial event at the onset of myocardial ischemia/reperfusion in which the Egr-1 transcription factor often serves as a master switch for various damage pathways following reperfusion injury. We hypothesized that an intracellular ROS/MAPK/Egr-1 signaling pathway is activated in cardiac microvascular endothelial cells (CMECs) following hypoxia/reoxygenation (H/R). ROS generation, by either H/R or the ROS donor xanthine oxidase-hypoxanthine (XO/HX) activated all three MAPKs (ERK1/2, JNK, p38), and induced Egr-1 expression and Egr-1 DNA-binding activity in CMECs, whereas ROS scavengers (EDA and NAC) had the opposite effect following H/R. Inhibitors of all three MAPKs individually inhibited induction of Egr-1 expression by H/R in CMECs. Moreover, N-n-butyl haloperidol (F2), previously shown to protect cardiomyocytes subjected to I/R, dose-dependently downregulated H/R-induced ROS generation, MAPK activation, and Egr-1 expression and activity in CMECs, whereas XO/HX and MAPK activators (EGF, anisomycin) antagonized the effects of F2. Inhibition of the ROS/MAPK/Egr-1 signaling pathway, by either F2, NAC, or inhibition of MAPK, increased CMEC viability and the GSH/GSSG ratio, and decreased Egr-1 nuclear translocation. These results show that the ROS/MAPK/Egr-1 signaling pathway mediates H/R injury in CMECs, and F2 blocks this pathway to protect against H/R injury and further alleviate myocardial I/R injury. PMID:28111550

Subchronic toxicity studies of t-butyl alcohol in rats and mice.

PubMed

Lindamood, C; Farnell, D R; Giles, H D; Prejean, J D; Collins, J J; Takahashi, K; Maronpot, R R

1992-07-01

The purpose of this study was to evaluate the toxicity of t-butyl alcohol, an important commodity chemical, an additive to unleaded gasoline, and a contaminant of drinking water. Ninety-day toxicity studies were conducted in B6C3F1 mice and Fischer 344 (F344) rats of both sexes using dosed water. Dose levels of t-butyl alcohol were 0, 0.25, 0.5, 1, 2, and 4% (w/v). Lethality was observed at the 4% level of both sexes and species. Weight-gain depression was present in all dose levels of male rats; 4% female rats; 1, 2, and 4% male mice; and 2 and 4% female mice. Water consumption was increased at lower dose levels in male rats and decreased in the higher dose levels of both sexes of rats and female mice. Clinical signs in rats were ataxia in both sexes and hypoactivity in males. Clinical signs in mice were ataxia, abnormal posture, and hypoactivity. In rats, urine volumes were reduced, in association with crystalluria. Gross lesions at necropsy were urinary tract calculi, renal pelvic and ureteral dilatation, and thickening of the urinary bladder mucosa. Microscopic lesions were hyperplasia of transitional epithelia and inflammation of the urinary bladder. In male rats treated with t-butyl alcohol, microscopic renal changes were suggestive of alpha-2 mu-globulin nephropathy. No-effect levels for the urinary tract lesions were 1% in male rats and mice (803.7 mg/kg/day for the male rats and 1565.8 mg/kg/day for the male mice) and 2% in female rats and mice (1451.5 mg/kg/day for the female rats and 4362.9 mg/kg/day for the female mice). The results indicate that in rodents the urinary tract is the target organ for t-butyl alcohol toxicity, and males are more sensitive to t-butyl alcohol toxicity than females.

78 FR 14667 - New Animal Drug Applications; Alfaprostol; Bicyclohexylammonium Fumagillin; N

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-07

...-, 884-, or 1,768-milligram, or 4.42-gram capsules. (3) Conditions of use in dogs--(i) Amount. Administered capsules orally. Capsules containing 221 milligrams of n-butyl chloride are administered to dogs... milligrams of n-butyl chloride are administered to dogs weighing under 5 pounds at a dosage of 1 capsule per...

IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (Etbe) ...

EPA Pesticide Factsheets

In September 2016, EPA released the draft IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) for public comment and discussion. The draft assessment was reviewed internally by EPA and by other federal agencies and White House Offices before public release. Consistent with the May 2009 IRIS assessment development process, all written comments on IRIS assessments submitted by other federal agencies and White House Offices are made publicly available. Accordingly, interagency comments and the interagency science consultation materials provided to other agencies, including interagency review drafts of the IRIS Toxicological Review of Ethyl Tertiary Butyl Ether are posted on this site. EPA is undertaking an new health assessment for ethyl tertiary butyl ether (ETBE) for the Integrated Risk Information System (IRIS). The outcome of this project will be a Toxicological Review and IRIS Summary of ETBE that will be entered on the IRIS database. IRIS is an EPA database containing Agency scientific positions on potential adverse human health effects that may result from chronic (or lifetime) exposure to chemicals in the environment. IRIS contains chemical-specific summaries of qualitative and quantitative health information in support of two steps of the risk assessment process, i.e., hazard identification and dose-response evaluation. IRIS assessments are used nationally and internationally in combination with specific situational exposure assessment infor

Short-Term Treatment with the Urease Inhibitor N-(n-Butyl) Thiophosphoric Triamide (NBPT) Alters Urea Assimilation and Modulates Transcriptional Profiles of Genes Involved in Primary and Secondary Metabolism in Maize Seedlings

PubMed Central

Zanin, Laura; Venuti, Silvia; Tomasi, Nicola; Zamboni, Anita; De Brito Francisco, Rita M.; Varanini, Zeno; Pinton, Roberto

2016-01-01

To limit nitrogen (N) losses from the soil, it has been suggested to provide urea to crops in conjunction with the urease inhibitor N-(n-butyl) thiophosphoric triamide (NBPT). However, recent studies reported that NBPT affects urea uptake and urease activity in plants. To shed light on these latter aspects, the effects of NBPT were studied analysing transcriptomic and metabolic changes occurring in urea-fed maize seedlings after a short-term exposure to the inhibitor. We provide evidence that NBPT treatment led to a wide reprogramming of plant metabolism. NBPT inhibited the activity of endogenous urease limiting the release and assimilation of ureic-ammonium, with a simultaneous accumulation of urea in plant tissues. Furthermore, NBPT determined changes in the glutamine, glutamate, and asparagine contents. Microarray data indicate that NBPT affects ureic-N assimilation and primary metabolism, such as glycolysis, TCA cycle, and electron transport chain, while activates the phenylalanine/tyrosine-derivative pathway. Moreover, the expression of genes relating to the transport and complexation of divalent metals was strongly modulated by NBPT. Data here presented suggest that when NBPT is provided in conjunction with urea an imbalance between C and N compounds might occur in plant cells. Under this condition, root cells also seem to activate a response to maintain the homeostasis of some micronutrients. PMID:27446099

76 FR 59906 - Fluazifop-P-butyl; Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

...: This regulation establishes and increases tolerances for residues of fluazifop-P-butyl in or on cotton, gin byproducts; cotton, refined oil; and cotton, undelinted seed. Syngenta Crop Protection requested...-(trifluoromethyl)-2- pyridinyl]oxy]phenoxy]propanoic acid, expressed as fluazifop, in or on cotton, undelinted seed...

40 CFR 721.7280 - 1,3-Propanediamine, N,N′-1,2-ethanediylbis-, polymer with 2,4,6-trichloro-1,3,5-triazine...

Code of Federal Regulations, 2010 CFR

2010-07-01

...-ethanediylbis-, polymer with 2,4,6-trichloro-1,3,5-triazine, reaction products with N-butyl-2,2,6,6-tetramethyl...-, polymer with 2,4,6-trichloro-1,3,5-triazine, reaction products with N-butyl-2,2,6,6-tetramethyl-4..., reaction products with N-butyl-2,2,6,6-tetramethyl-4-piperidinamine (PMN P-89-632) is subject to reporting...

40 CFR 721.7280 - 1,3-Propanediamine, N,N′-1,2-ethanediylbis-, polymer with 2,4,6-trichloro-1,3,5-triazine...

Code of Federal Regulations, 2011 CFR

2011-07-01

...-ethanediylbis-, polymer with 2,4,6-trichloro-1,3,5-triazine, reaction products with N-butyl-2,2,6,6-tetramethyl...-, polymer with 2,4,6-trichloro-1,3,5-triazine, reaction products with N-butyl-2,2,6,6-tetramethyl-4..., reaction products with N-butyl-2,2,6,6-tetramethyl-4-piperidinamine (PMN P-89-632) is subject to reporting...

Method for determination of methyl tert-butyl ether and its degradation products in water

USGS Publications Warehouse

Church, C.D.; Isabelle, L.M.; Pankow, J.F.; Rose, D.L.; Tratnyek, P.G.

1997-01-01

An analytical method is described that can detect the major alkyl ether compounds that are used as gasoline oxygenates (methyl tert-butyl ether, MTBE; ethyl tert-butyl ether, ETBE; and tert-amyl methyl ether, TAME) and their most characteristic degradation products (tert-butyl alcohol, TBA; tert-butyl formate, TBF; and tert-amyl alcohol, TAA) in water at sub-ppb concentrations. The new method involves gas chromatography (GC) with direct aqueous injection (DAI) onto a polar column via a splitless injector, coupled with detection by mass spectrometry (MS). DAI-GC/MS gives excellent agreement with conventional purge-and-trap methods for MTBE over a wide range of environmentally relevant concentrations. The new method can also give simultaneous identification of polar compounds that might occur as degradation products of gasoline oxygenates, such as TBA, TBF, TAA, methyl acetate, and acetone. When the method was applied to effluent from a column microcosm prepared with core material from an urban site in New Jersey, conversion of MTBE to TBA was observed after a lag period of 35 days. However, to date, analyses of water samples from six field sites using the DAI-GC/MS method have not produced evidence for the expected products of in situ degradation of MTBE.An analytical method is described that can detect the major alkyl ether compounds that are used as gasoline oxygenates (methyl tert-butyl ether, MTBE; ethyl tert-butyl ether, ETBE; and tert-amyl methyl ether, TAME) and their most characteristic degradation products (tert-butyl alcohol, TBA; tert-butyl formate, TBF; and tert-amyl alcohol, TAA) in water at sub-ppb concentrations. The new method involves gas chromatography (GC) with direct aqueous injection (DAI) onto a polar column via a splitless injector, coupled with detection by mass spectrometry (MS). DAI-GC/MS gives excellent agreement with conventional purge-and-trap methods for MTBE over a wide range of environmentally relevant concentrations. The new method

Vibrational frequency analysis, FT-IR, DFT and M06-2X studies on tert-Butyl N-(thiophen-2yl)carbamate

NASA Astrophysics Data System (ADS)

Sert, Yusuf; Singer, L. M.; Findlater, M.; Doğan, Hatice; Çırak, Ç.

2014-07-01

In this study, the experimental and theoretical vibrational frequencies of a newly synthesized tert-Butyl N-(thiophen-2yl)carbamate have been investigated. The experimental FT-IR (4000-400 cm-1) spectrum of the molecule in the solid phase have been recorded. The theoretical vibrational frequencies and optimized geometric parameters (bond lengths and bond angles) have been calculated by using density functional theory (DFT/B3LYP: Becke, 3-parameter, Lee-Yang-Parr) and DFT/M06-2X (the highly parametrized, empirical exchange correlation function) quantum chemical methods with the 6-311++G(d,p) basis set by Gaussian 09W software, for the first time. The vibrational frequencies have been assigned using potential energy distribution (PED) analysis by using VEDA 4 software. The computational optimized geometric parameters and vibrational frequencies have been found to be in good agreement with the corresponding experimental data, and with related literature results. In addition, the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energies and the other related molecular energy values have been calculated and are depicted.

Effect of various concentrations of butylated hydroxyanisole and butylated hydroxytoluene on freezing capacity of Turkman stallion sperm.

PubMed

Seifi-Jamadi, Afshin; Kohram, Hamid; Zareh-Shahne, Ahmad; Dehghanizadeh, Parvaneh; Ahmad, Ejaz

2016-07-01

The present study aimed to determine the effect of different concentrations of butylated hydroxyanisole (BHA) and butylated hydroxytoluene (BHT) on post-thaw stallion sperm quality. The ejaculates collected from four healthy mature Turkmen stallions were pooled and divided into eight aliquots. The samples were diluted with extenders containing different concentrations (0.5, 1 or 2mM/mL) of BHA or BHT. The positive control (PC) samples were diluted with extender containing 0.5% ethanol (v/v) whereas; the negative control (NC) samples were diluted with basic extender only. Semen samples were frozen according to a standard protocol. After thawing of samples, sperm motility, viability, membrane integrity, total abnormality and lipid peroxidation were assessed. The greatest (P<0.05) values for total sperm motility, viability and plasma membrane functionality and least values for malonedialdehyde (MDA) concentration were observed in samples supplemented either with 1mM BHT or 2mM BHA. However, the progressive motility was greater (P<0.05) only in samples treated with 2mM BHA. In conclusion, the use of 1mM BHT or 2mM BHA in extender improves the freezing capacity of stallion sperm by reducing oxidative stress during freeze-thaw process. Copyright © 2016 Elsevier B.V. All rights reserved.

Aerobic mineralization of MTBE and tert-butyl alcohol by stream-bed sediment microorganisms

USGS Publications Warehouse

Bradley, P.M.; Landmeyer, J.E.; Chapelle, F.H.

1999-01-01

Microorganisms indigenous to the stream-bed sediments at two gasoline- contaminated groundwater sites demonstrated significant mineralization of the fuel oxygenates, methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA). Up to 73% of [U-14C]-MTBE and 84% of [U-14C]-TBA were degraded to 14CO2 under mixed aerobic/anaerobic conditions. No significant mineralization was observed under strictly anaerobic conditions. The results indicate that, under the mixed aerobic/anaerobic conditions characteristic of stream-bed sediments, microbial processes may provide a significant environmental sink for MTBE and TBA delivered to surface water bodies by contaminated groundwater or by other sources.Microorganisms indigenous to the stream-bed sediments at two gasoline-contaminated groundwater sites demonstrated significant mineralization of the fuel oxygenates, methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA). Up to 73% of [U-14C]-MTBE and 84% of [U-14C]-TBA were degraded to 14CO2 under mixed aerobic/anaerobic conditions. No significant mineralization was observed under strictly anaerobic conditions. The results indicate that, under the mixed aerobic/anaerobic conditions characteristic of stream-bed sediments, microbial processes may provide a significant environmental sink for MTBE and TBA delivered to surface water bodies by contaminated groundwater or by other sources.

The use of technetium-99m-labeled human serum albumin diethylenetriamine pentaacetic acid single-photon emission CT scan in the follow-up of type II endoleak treatment.

PubMed

Nakai, Motoki; Sato, Hirotatsu; Ikoma, Akira; Sonomura, Tetsuo; Sato, Morio

2014-03-01

An 84-year-old woman presented with persistent type II endoleak with sac expansion from 57 mm to 75 mm during 4-year follow-up after endovascular abdominal aortic aneurysm repair. The patient underwent transabdominal embolization with coils and N-butyl cyanoacrylate/ethiodized oil (Lipiodol; Guerbet, Villepinte, France) mixture (2.5 mL). Because of the anticipated embolization artifacts on follow-up computed tomography (CT), technetium-99m-labeled human serum albumin diethylenetriamine pentaacetic acid single-photon emission computed tomography ((99m)Tc-HSAD SPECT) was performed before and after the intervention. Perigraft accumulation on (99m)Tc-HSAD SPECT corresponding to the endoleak disappeared after embolization. CT scan performed 12 months after embolization showed no signs of sac expansion. (99m)Tc-HSAD SPECT may be useful for evaluating therapeutic effect after embolization for endoleak. Copyright © 2014 SIR. Published by Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Inagawa, Shoichi, E-mail: sinagawa@med.niigata-u.ac.j; Unno, Naoki; Yamashita, Shuhei

A 28-year-old woman was referred to our institution with hope for another child after having an abortion several months previously to avoid a potential risk of catastrophic hemorrhage from a retroperitoneal arteriovenous fistula (AVF) with enlarged and twisted draining veins in the pelvis. Multiple branches coming from the right lumbar arteries and the right iliac arteries fed fistulae converging on an enlarged venous pouch anterior to the psoas major muscle in the right retroperitoneal space. It seemed impossible to achieve complete occlusion of the lesion in a single session by either transarterial or transvenous approach. A laparotomy and direct puncturemore » of the enlarged draining vein immediately downstream of the venous pouch was performed and embolization was done with n-butyl cyanoacrylate and the aid of coils. Complete occlusion of the retroperitoneal AVF was achieved and confirmed in control angiography 5 months later.« less

Combination therapy using PSE and TIO ameliorates hepatic encephalopathy due to intrahepatic portosystemic venous shunt in idiopathic portal hypertension

PubMed Central

Kojima, Seiichiro; Ito, Hiroyuki; Takashimizu, Shinji; Ichikawa, Hitoshi; Matsumoto, Tomohiro; Hasebe, Terumitsu

2016-01-01

A 64-year-old woman treated for anemia and ascites exhibited hepatic encephalopathy. Abdominal ultrasonography and computed tomography (CT) showed communication between the portal vein and the middle hepatic vein, indicating an intrahepatic portosystemic venous shunt (PSS). Since hepatic encephalopathy of the patient was resistant to medical treatment, interventional radiology was performed for the treatment of shunt obliteration. Hepatic venography showed anastomosis between the hepatic vein branches, supporting the diagnosis of idiopathic portal hypertension (IPH). To minimize the increase in portal vein pressure after shunt obliteration, partial splenic artery embolization (PSE) was first performed to reduce portal vein blood flow. Transileocolic venous obliteration (TIO) was then performed, and intrahepatic PSS was successfully obliterated using coils with n-butyl-2-cyanoacrylate (NBCA). In the present case, hepatic encephalopathy due to intrahepatic PSS in the patient with IPH was successfully treated by combination therapy using PSE and TIO. PMID:27651930

[Usefulness of endovascular treatment for delayed massive epistaxis following endoscopic endonasal transsphenoidal surgery: a case report].

PubMed

Oka, Tetsuo; Sugiu, Kenji; Ishida, Joji; Hishikawa, Tomohito; Ono, Shigeki; Tokunaga, Koji; Date, Isao

2012-01-01

We report here a case of massive nasal bleeding from the sphenopalatine artery three weeks after endonasal transsphenoidal surgery. This 66-year-old male suffered from massive nasal bleeding with the status of hypovolemic shock. Under general anesthesia, an emergent angiography revealed an extravasation from the sphenopalatine artery. Trans-arterial embolization using coil and n-butyl-cyanoacrylate (NBCA) was performed following the diagnostic angiography. Complete occlusion of the injured artery was achieved. The patient showed good recovery from general anesthesia. Delayed nasal bleeding after endonasal transsphenoidal surgery is a rare but important complication. The sphenopalatine artery and its branch are located in the hidden inferior lateral corner of the sphenoid sinus and may be injured during enlargement of the sphenoid opening. When massive delayed nasal bleeding follows transsphenoidal surgery and damage of the internal carotid artery has been ruled out, endovascular treatment of the external carotid artery should be considered.

Azobenzene versus 3,3',5,5'-tetra-tert-butyl-azobenzene (TBA) at Au(111): characterizing the role of spacer groups.

PubMed

McNellis, Erik R; Bronner, Christopher; Meyer, Jörg; Weinelt, Martin; Tegeder, Petra; Reuter, Karsten

2010-06-28

We present large-scale density-functional theory (DFT) calculations and temperature programmed desorption measurements to characterize the structural, energetic and vibrational properties of the functionalized molecular switch 3,3',5,5'-tetra-tert-butyl-azobenzene (TBA) adsorbed at Au(111). Particular emphasis is placed on exploring the accuracy of the semi-empirical dispersion correction approach to semi-local DFT (DFT-D) in accounting for the substantial van der Waals component in the surface bonding. In line with previous findings for benzene and pure azobenzene at coinage metal surfaces, DFT-D significantly overbinds the molecule, but seems to yield an accurate adsorption geometry as far as can be judged from the experimental data. Comparing the trans adsorption geometry of TBA and azobenzene at Au(111) reveals a remarkable insensitivity of the structural and vibrational properties of the -N[double bond, length as m-dash]N- moiety. This questions the established view of the role of the bulky tert-butyl-spacer groups for the switching of TBA in terms of a mere geometric decoupling of the photochemically active diazo-bridge from the gold substrate.

Decreased serum free testosterone in workers exposed to high levels of di-n-butyl phthalate (DBP) and di-2-ethylhexyl phthalate (DEHP): a cross-sectional study in China.

PubMed

Pan, Guowei; Hanaoka, Tomoyuki; Yoshimura, Mariko; Zhang, Shujuan; Wang, Ping; Tsukino, Hiromasa; Inoue, Koichi; Nakazawa, Hiroyuki; Tsugane, Shoichiro; Takahashi, Ken

2006-11-01

Observations of adverse developmental and reproductive effects in laboratory animals and wildlife have fueled increasing public concern regarding the potential for various chemicals to impair human fertility. Our objective in this study was to assess the effect of occupational exposure to high levels of phthalate esters on the balance of gonadotropin and gonadal hormones including luteinizing hormone, follicle-stimulating hormone, free testosterone (fT), and estradiol. We examined urine and blood samples of 74 male workers at a factory producing unfoamed polyvinyl chloride flooring exposed to di-n-butyl phthalate (DBP) and di-2-ethylhexyl phthalate (DEHP) and compared them with samples from 63 male workers from a construction company, group matched for age and smoking status. Compared to the unexposed workers, the exposed workers had substantially and significantly elevated concentrations of mono-n-butyl phthalate (MBP; 644.3 vs. 129.6 microg/g creatinine, p < 0.001) and mono-2-ethylhexyl phthalate (MEHP; 565.7 vs. 5.7 microg/g creatinine, p < 0.001). fT was significantly lower (8.4 vs. 9.7 microg/g creatinine, p = 0.019) in exposed workers than in unexposed workers. fT was negatively correlated to MBP (r = -0.25, p = 0.03) and MEHP (r = -0.19, p = 0.095) in the exposed worker group. Regression analyses revealed that fT decreases significantly with increasing total phthalate ester score (the sum of quartiles of MBP and MEHP; r = -0.26, p = 0.002). We observed a modest and significant reduction of serum fT in workers with higher levels of urinary MBP and MEHP compared with unexposed workers.

Crystal structure of (2,2′-bi­pyridine-κ2 N,N′)bis­(3,5-di-tert-butyl-o-benzo­quinonato-κ2 O,O′)ruthenium(II)

PubMed Central

Ali, Akram; Potaskalov, Vadim A.

2017-01-01

In the title mononuclear complex, [Ru(C14H20O2)2(C10H8N2)], the RuII ion has a distorted octa­hedral coordination environment defined by two N atoms of the chelating 2,2′-bi­pyridine ligand and four O atoms from two 3,5-di-tert-butyl-o-benzo­quinone ligands. In the crystal, the complex mol­ecules are linked by inter­molecular C—H⋯O hydrogen bonds and π–π stacking inter­actions between the 2,2′-bi­pyridine ligands [centroid–centroid distance = 3.538 (3) Å], resulting in a layer structure extending parallel to the ab plane. PMID:28316832

Time course of electrophysiologic effects induced by di-n-butyl-2,2-dichlorovinyl phosphate (DBCV) in the adult hen.

PubMed

Robertson, D G; Mattson, A M; Bestervelt, L L; Richardson, R J; Anderson, R J

1988-01-01

Previous work in our laboratory indicated that di-n-butyl-2,2-dichlorovinyl phosphate (DBCV) produced electrophysiologic changes in hen peripheral nerve that coincided with the development of histopathologic changes and neurologic signs of peripheral neuropathy. The purpose of the present study was to follow the time course for the development of the electrophysiologic changes and to determine whether pretreatment with the phosphinate analog of DBCV (DBCV-P), a nonageable organophosphorus compound, prevented these effects. Although significant electrophysiologic deficits occurred in the tibial and sciatic nerve 24 h after DBCV treatment, the most marked changes coincided with the onset of clinical signs of organophosphorus-induced delayed neuropathy (14-21 d). The sciatic and tibial nerves were equally susceptible to DBCV in producing deficits characterized by changes in the relative refractory period and an increased strength-duration threshold. Pretreatment with DBCV-P prevented the clinical signs and also attenuated the electrophysiologic deficits induced by DBCV treatment. These data suggest that electrophysiologic deficits occur before clinical signs of organophosphorus-induced delayed neuropathy (OPIDN) and may be indicative of a link between neurotoxic esterase (NTE) inhibition and onset of overt clinical toxicity.

Biosynthesis of t-Butyl in Apratoxin A: Functional Analysis and Architecture of a PKS Loading Module.

PubMed

Skiba, Meredith A; Sikkema, Andrew P; Moss, Nathan A; Lowell, Andrew N; Su, Min; Sturgis, Rebecca M; Gerwick, Lena; Gerwick, William H; Sherman, David H; Smith, Janet L

2018-05-08

The unusual feature of a t-butyl group is found in several marine-derived natural products including apratoxin A, a Sec61 inhibitor produced by the cyanobacterium Moorea bouillonii PNG 5-198. Here, we determine that the apratoxin A t-butyl group is formed as a pivaloyl acyl carrier protein (ACP) by AprA, the polyketide synthase (PKS) loading module of the apratoxin A biosynthetic pathway. AprA contains an inactive "pseudo" GCN5-related N-acetyltransferase domain (ΨGNAT) flanked by two methyltransferase domains (MT1 and MT2) that differ distinctly in sequence. Structural, biochemical, and precursor incorporation studies reveal that MT2 catalyzes unusually coupled decarboxylation and methylation reactions to transform dimethylmalonyl-ACP, the product of MT1, to pivaloyl-ACP. Further, pivaloyl-ACP synthesis is primed by the fatty acid synthase malonyl acyltransferase (FabD), which compensates for the ΨGNAT and provides the initial acyl-transfer step to form AprA malonyl-ACP. Additionally, images of AprA from negative stain electron microscopy reveal multiple conformations that may facilitate the individual catalytic steps of the multienzyme module.

Temperature effect on tert-butyl alcohol (TBA) biodegradation kinetics in hyporheic zone soils.

PubMed

Greenwood, Mark H; Sims, Ronald C; McLean, Joan E; Doucette, William J

2007-09-19

Remediation of tert-butyl alcohol (TBA) in subsurface waters should be taken into consideration at reformulated gasoline contaminated sites since it is a biodegradation intermediate of methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), and tert-butyl formate (TBF). The effect of temperature on TBA biodegradation has not been not been published in the literature. Biodegradation of [U 14C] TBA was determined using hyporheic zone soil microcosms. First order mineralization rate constants of TBA at 5 degrees C, 15 degrees C and 25 degrees C were 7.84 +/- 0.14 x 10-3, 9.07 +/- 0.09 x 10-3, and 15.3 +/- 0.3 x 10-3 days-1, respectively (or 2.86 +/- 0.05, 3.31 +/- 0.03, 5.60 +/- 0.14 years-1, respectively). Temperature had a statistically significant effect on the mineralization rates and was modelled using the Arrhenius equation with frequency factor (A) and activation energy (Ea) of 154 day-1 and 23,006 mol/J, respectively. Results of this study are the first to determine mineralization rates of TBA for different temperatures. The kinetic rates determined in this study can be used in groundwater fate and transport modelling of TBA at the Ronan, MT site and provide an estimate for TBA removal at other similar shallow aquifer sites and hyporheic zones as a function of seasonal change in temperature.

Fluorescence development of fingerprints by combining conjugated polymer nanoparticles with cyanoacrylate fuming.

PubMed

Chen, Hong; Ma, Rong-Liang; Fan, Zhinan; Chen, Yun; Wang, Zizheng; Fan, Li-Juan

2018-05-23

Selecting appropriate developing methods/reagents or their combination to enhance the effect for fingerprint development is of great significance for practical forensic investigation. Ethyl-2-cyanoacrylate ester (superglue) fuming is a popular method for "in-situ" developing fingerprints in forensic science, followed by fluorescence staining to enhance the contrast of the fingerprint image in some occasion. In this study, a series of fluorescent poly(p-phenylene vinylene) (PPV) nanoparticles (NPs) in colloidal solution were successfully prepared and the emission color was tuned via a simple way. The fuming process was carried out using a home-made device. The staining was accomplished by immersing a piece of absorbent cotton into the solution of NPs, and then gently applied on the fumed fingerprints for several times. The PPV NPs were found to have a better developing effect than Rhodamine 6G when excited by 365 nm UV lamp. Different emission colors of NPs are advantageous in developing fingerprints on various substrates. Mechanism study suggested that the NPs were embedded in the porous structure of the superglue resin. In all, the combination of fuming method with the staining by conjugated polymer NPs has been demonstrated to be successful for fluorescent fingerprint development and be promising for more practical forensic applications. Copyright © 2018. Published by Elsevier Inc.

[Mechanisms of (2-methyl-n-butyl) shikonin induced apoptosis of gastric cancer SGC-7901 cells].

PubMed

Wang, Hai-Bing; Ma, Xiao-Qiong

2012-06-01

This study is to investigate the effect of (2-methyl-n-butyl) shikonin (MBS) on inducing apoptosis of human gastric cancer cell line SGC-7901 and the role of ERK1/2 signal pathway in the apoptosis. MTT assay was used to detect SGC-7901 cell proliferation. DNA condensation was measured by DAPI stain. Cell apoptosis was analyzed by flow cytometry. Mitochondrial membrane potential (MMP) was analyzed by JC-1 staining. The protein expressions of Bcl-2, Bax, Survivin, cleaved caspase-9, cleaved caspase-3, cleaved PARP, p-ERK1/2, ERK1/2, p-JNK, JNK, p-p38 and p38 were detected by Western blotting. The results showed that MBS reduced the cell viability of SGC-7901 cells in a dose- and time-dependent manner. The IC50 at 24 h and 48 h for SGC-7901 cells was 10.113 and 4.196 micromolL(-1), respectively. After being treated with MBS, the typical nuclear condensation was observed in SGC-7901 cells by DAPI stain. Apoptosis in SGC-7901 cells was induced by MBS in a dose dependent manner. The protein expression of Bcl-2 was down-regulated, while the protein expressions of cleaved caspase-9, cleaved caspase-3, cleaved PARP, p-ERK1/2 and p-JNK were up-regulated after MBS treatment. U0126, a specific MAP kinase (MEK1/2) inhibitor, blocked the ERK1/2 activation by MBS. MMP was decreased by MBS treatment. It can be concluded that MBS could inhibit SGC-7901 cell proliferation and induce apoptosis. Mitochondrial apoptosis pathway, ERK1/2 signal pathway and JNK signal pathway might be involved in this process.

40 CFR 721.10072 - Benzene, 1,1′-methylenebis[4-isocyanato-, polymer with benzenedicarboxylic acid, butyl dialkyl...

Code of Federal Regulations, 2010 CFR

2010-07-01

...-isocyanato-, polymer with benzenedicarboxylic acid, butyl dialkyl ester, poly[oxy(methyl-1,2-ethanediyl)], .alpha.-hydro-.omega.-hydroxy-, oxirane, alkyl-, polymer with oxirane, ether with propanepolyol and...-isocyanato-, polymer with benzenedicarboxylic acid, butyl dialkyl ester, poly[oxy(methyl-1,2-ethanediyl...

Enhanced bioavailability of orally administered flurbiprofen by combined use of hydroxypropyl-cyclodextrin and poly(alkyl-cyanoacrylate) nanoparticles.

PubMed

Zhao, Xiaoyun; Li, Wei; Luo, Qiuhua; Zhang, Xiangrong

2014-03-01

Flurbiprofen was formulated into nanoparticle suspension to improve its oral bioavailability. Hydroxypropyl-β-cyclodextrin inclusion-flurbiprofen complex (HP-β-CD-FP) was prepared, then incorporating this complex into poly(alkyl-cyanoacrylate) (PACA) nanoparticles. HP-β-CD-FP-PACA nanoparticle was prepared by the emulsion solvent polymerization method. The zeta potential was -26.8 mV, the mean volume particle diameter was 134 nm, drug encapsulation efficiency was 53.3 ± 3.6 % and concentration was 1.5 mg/mL. The bioavailability of flurbiprofen from optimized nanoparticles was assessed in male Wistar rats at a dose of 15 mg/kg. As compared to the flurbiprofen suspension, 211.6 % relative bioavailability was observed for flurbiprofen nanoparticles. The reduced particle size and increased surface area may contribute to improve oral bioavailability of flurbiprofen.

Copolymer Networks From Oligo(ε-caprolactone) and n-Butyl Acrylate Enable a Reversible Bidirectional Shape-Memory Effect at Human Body Temperature.

PubMed

Saatchi, Mersa; Behl, Marc; Nöchel, Ulrich; Lendlein, Andreas

2015-05-01

Exploiting the tremendous potential of the recently discovered reversible bidirectional shape-memory effect (rbSME) for biomedical applications requires switching temperatures in the physiological range. The recent strategy is based on the reduction of the melting temperature range (ΔT m ) of the actuating oligo(ε-caprolactone) (OCL) domains in copolymer networks from OCL and n-butyl acrylate (BA), where the reversible effect can be adjusted to the human body temperature. In addition, it is investigated whether an rbSME in the temperature range close or even above Tm,offset (end of the melting transition) can be obtained. Two series of networks having mixtures of OCLs reveal broad ΔTm s from 2 °C to 50 °C and from -10 °C to 37 °C, respectively. In cyclic, thermomechanical experiments the rbSME can be tailored to display pronounced actuation in a temperature interval between 20 °C and 37 °C. In this way, the application spectrum of the rbSME can be extended to biomedical applications. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Clinical outcomes of symptomatic arterioportal fistulas after transcatheter arterial embolization

PubMed Central

Hirakawa, Masakazu; Nishie, Akihiro; Asayama, Yoshiki; Ishigami, Kousei; Ushijima, Yasuhiro; Fujita, Nobuhiro; Honda, Hiroshi

2013-01-01

AIM: To evaluate the complications and clinical outcomes of transcatheter arterial embolization (TAE) for symptoms related to severe arterioportal fistulas (APFs). METHODS: Six patients (3 males, 3 females; mean age, 63.8 years; age range, 60-71 years) with chronic liver disease and severe APFs due to percutaneous intrahepatic treatment (n = 5) and portal vein (PV) tumor thrombosis of hepatocellular carcinoma (n = 1) underwent TAE for symptoms related to severe APFs [refractory ascites (n = 4), hemorrhoidal hemorrhage (n = 1), and hepatic encephalopathy (n = 1)]. Control of symptoms related to APFs and complications were evaluated during the follow-up period (range, 4-57 mo). RESULTS: In all patients, celiac angiography revealed immediate retrograde visualization of the main PV before TAE, indicating severe APF. Selective TAE for the hepatic arteries was performed using metallic coils (MC, n = 4) and both MCs and n-butyl cyanoacrylate (n = 2). Three patients underwent repeated TAEs for residual APFs and ascites. Four patients developed PV thrombosis after TAE. During the follow-up period after TAE, APF obliteration and symptomatic improvement were obtained in all patients. CONCLUSION: Although TAE for severe APFs may sometimes be complicated by PV thrombosis, TAE can be an effective treatment to improve clinical symptoms related to severe APFs. PMID:23494252

Decreased Serum Free Testosterone in Workers Exposed to High Levels of Di-n-butyl Phthalate (DBP) and Di-2-ethylhexyl Phthalate (DEHP): A Cross-Sectional Study in China

PubMed Central

Pan, Guowei; Hanaoka, Tomoyuki; Yoshimura, Mariko; Zhang, Shujuan; Wang, Ping; Tsukino, Hiromasa; Inoue, Koichi; Nakazawa, Hiroyuki; Tsugane, Shoichiro; Takahashi, Ken

2006-01-01

Background Observations of adverse developmental and reproductive effects in laboratory animals and wildlife have fueled increasing public concern regarding the potential for various chemicals to impair human fertility. Objective Our objective in this study was to assess the effect of occupational exposure to high levels of phthalate esters on the balance of gonadotropin and gonadal hormones including luteinizing hormone, follicle-stimulating hormone, free testosterone (fT), and estradiol. Methods We examined urine and blood samples of 74 male workers at a factory producing unfoamed polyvinyl chloride flooring exposed to di-n-butyl phthalate (DBP) and di-2-ethylhexyl phthalate (DEHP) and compared them with samples from 63 male workers from a construction company, group matched for age and smoking status. Results Compared to the unexposed workers, the exposed workers had substantially and significantly elevated concentrations of mono-n-butyl phthalate (MBP; 644.3 vs. 129.6 μg/g creatinine, p < 0.001) and mono-2-ethylhexyl phthalate (MEHP; 565.7 vs. 5.7 μg/g creatinine, p < 0.001). fT was significantly lower (8.4 vs. 9.7 μg/g creatinine, p = 0.019) in exposed workers than in unexposed workers. fT was negatively correlated to MBP (r = −0.25, p = 0.03) and MEHP (r = −0.19, p = 0.095) in the exposed worker group. Regression analyses revealed that fT decreases significantly with increasing total phthalate ester score (the sum of quartiles of MBP and MEHP; r = −0.26, p = 0.002). Conclusion We observed a modest and significant reduction of serum fT in workers with higher levels of urinary MBP and MEHP compared with unexposed workers. PMID:17107847

Cyanoacrylate Skin Surface Stripping and the 3S-Biokit Advent in Tropical Dermatology: A Look from Liège

PubMed Central

Piérard, Gérald E.; Piérard-Franchimont, Claudine; Paquet, Philippe; Hermanns-Lê, Trinh; Delvenne, Philippe

2014-01-01

In the dermatopathology field, some simple available laboratory tests require minimum equipment for establishing a diagnosis. Among them, the cyanoacrylate skin surface stripping (CSSS), formerly named skin surface biopsy or follicular biopsy, represents a convenient low cost procedure. It is a minimally invasive method collecting a continuous sheet of stratum corneum and horny follicular casts. In the vast majority of cases, it is painless and is unassociated with adverse events. CSSS can be performed in subjects of any age. The method has a number of applications in diagnostic dermatopathology and cosmetology, as well as in experimental dermatology settings. A series of derived analytic procedures include xerosis grading, comedometry, corneofungimetry, corneodynamics of stratum corneum renewal, corneomelametry, corneosurfametry, and corneoxenometry. PMID:25177726

76 FR 5696 - Fluazifop-P-butyl; Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-02

... for residues of the herbicide, fluazifop-P- butyl, in or on banana and plantains at 0.01 parts per..., peel (wet) at 1.1 ppm; potato, chips at 3.0 ppm; and potato, granules/flakes at 5.0 ppm. That notice... determined that the proposed tolerances for plantains, sugarbeet (top), and potato peel (wet) are unnecessary...

Temperature effect on tert-butyl alcohol (TBA) biodegradation kinetics in hyporheic zone soils

PubMed Central

Greenwood, Mark H; Sims, Ronald C; McLean, Joan E; Doucette, William J

2007-01-01

Background Remediation of tert-butyl alcohol (TBA) in subsurface waters should be taken into consideration at reformulated gasoline contaminated sites since it is a biodegradation intermediate of methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), and tert-butyl formate (TBF). The effect of temperature on TBA biodegradation has not been not been published in the literature. Methods Biodegradation of [U 14C] TBA was determined using hyporheic zone soil microcosms. Results First order mineralization rate constants of TBA at 5°C, 15°C and 25°C were 7.84 ± 0.14 × 10-3, 9.07 ± 0.09 × 10-3, and 15.3 ± 0.3 × 10-3 days-1, respectively (or 2.86 ± 0.05, 3.31 ± 0.03, 5.60 ± 0.14 years-1, respectively). Temperature had a statistically significant effect on the mineralization rates and was modelled using the Arrhenius equation with frequency factor (A) and activation energy (Ea) of 154 day-1 and 23,006 mol/J, respectively. Conclusion Results of this study are the first to determine mineralization rates of TBA for different temperatures. The kinetic rates determined in this study can be used in groundwater fate and transport modelling of TBA at the Ronan, MT site and provide an estimate for TBA removal at other similar shallow aquifer sites and hyporheic zones as a function of seasonal change in temperature. PMID:17877835

Vibrational frequency analysis, FT-IR, DFT and M06-2X studies on tert-Butyl N-(thiophen-2yl)carbamate.

PubMed

Sert, Yusuf; Singer, L M; Findlater, M; Doğan, Hatice; Çırak, Ç

2014-07-15

In this study, the experimental and theoretical vibrational frequencies of a newly synthesized tert-Butyl N-(thiophen-2yl)carbamate have been investigated. The experimental FT-IR (4000-400 cm(-1)) spectrum of the molecule in the solid phase have been recorded. The theoretical vibrational frequencies and optimized geometric parameters (bond lengths and bond angles) have been calculated by using density functional theory (DFT/B3LYP: Becke, 3-parameter, Lee-Yang-Parr) and DFT/M06-2X (the highly parametrized, empirical exchange correlation function) quantum chemical methods with the 6-311++G(d,p) basis set by Gaussian 09W software, for the first time. The vibrational frequencies have been assigned using potential energy distribution (PED) analysis by using VEDA 4 software. The computational optimized geometric parameters and vibrational frequencies have been found to be in good agreement with the corresponding experimental data, and with related literature results. In addition, the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energies and the other related molecular energy values have been calculated and are depicted. Copyright © 2014 Elsevier B.V. All rights reserved.

Unexpected complexes from meta-phenylene bis(tert-butyl nitroxides) and gadolinium(III) 1,1,1,5,5,5-hexafluoropentane-2,4-dionate

NASA Astrophysics Data System (ADS)

Sekine, Hiroyasu; Ishida, Takayuki

2018-01-01

Coordination reaction of the stable ground triplet biradical biphenyl-3,5-diyl bis(tert-butyl nitroxide) and [Gd(hfac)3(H2O)2] unexpectedly gave complexes containing a dimerized diamagnetic ligand via a [3+3] cycloaddition of the benzene rings (hfac = 1,1,1,5,5,5-hexafluoropentane-2,4-dionate). To avoid such dimerization, we introduced a bulkier substituent into the ligand; namely, a new ground triplet biradical 5-mesityl-1,3-phenylene bis(tert-butyl nitroxide) was applied to this complexation scheme. However, an unexpected complex was again obtained in a different way, and the magnetic study revealed that the novel ligand involved was diamagnetic. The crystallographic analysis of the product clarified isomerization from the paramagnetic ligand to a diamagnetic N-tert-butylaminoquinone imine N-oxide ligand as a result of disproportionation from two open-shell nitroxide groups to closed-shell groups, an amine and a nitrone. The present paper reports the first structural evidence for a diamagnetic isomer of m-phenylene-bridged bisnitroxde compounds.

Gabapentin-base synthesis and theoretical studies of biologically active compounds: N-cyclohexyl-3-oxo-2-(3-oxo-2-azaspiro[4.5] decan-2-yl)-3-arylpropanamides and N-(tert-butyl)-2-(3-oxo-2-azaspiro[4.5]decan-2-yl)-2-arylacetamide derivatives

NASA Astrophysics Data System (ADS)

Amirani Poor, Mahboobe; Darehkordi, Ali; Anary-Abbasinejad, Mohammad; Mohammadi, Marziyeh

2018-01-01

An intermolecular Ugi reaction of 2-(1-(aminomethyl)cyclohexyl)acetic acid (gabapentin) with glyoxal and cyclohexyl isocyanide or aromatic aldehyde and tertbutyl isocyanide under mild conditions in ethanol have been developed to produce two novel class of N-cyclohexyl-3-(aryl)-3-oxo-2-(3-oxo-2-azaspiro[4.5]decan-2-yl)propanamideins and N-(tert-butyl)-2-(3-oxo-2-azaspiro[4.5]decan-2-yl)-2-arylacetamide derivatives in good to excellent yields. This presents the first report for the intermolecular Ugi three component reaction of gabapentin, glyoxal, and an isocyanide. Also according to the theoretical studies the electron-donating groups increase the strength of intramolecular hydrogen bond and electron-withdrawing groups decrease the strength of intramolecular hydrogen bond.

Rotational Spectroscopy and Quantum Chemical Calculations of a Fruit Ester: the Microwave Spectrum of n-BUTYL Acetate

NASA Astrophysics Data System (ADS)

Attig, T.; Sutikdja, L. W.; Kannengiesser, R.; Stahl, W.; Kleiner, I.

2013-06-01

In the course of our studies on a number of aliphatic ester molecules and natural substances, the rotational spectrum of n-butyl acetate (CH_{3}-COO-C_4H_9) has been recorded for the first time in the 10-13.5 GHz frequency range, using the MB-FTMW spectrometer in Aachen, with an instrumental uncertainty of a few kHz for unblended lines. Three conformers were observed. The main conformer with C_{1} symmetry has a strong spectrum. The other two conformers have C_{s} and C_{1} symmetries. Their intensities are considerably weaker. The quantum chemical calculations of specific conformers were carried out at the MP2/6-311++G(d,p) level, and for the main conformer different levels of theory were calculated. To analyze the internal rotation of the acetyl methyl groups the codes XIAM (based on the Combined Axis Method) and BELGI (based on the Rho-Axis-Method) were used to model the large amplitude motion. The molecular structures of the three conformers were determined and the values of the experimental rotational constants were compared with those obtained by ab initio methods. For all conformers torsional barriers of approximately 100 cm^{-1} were found. This study is part of a larger project which aims at determining the lowest energy conformers and their structures of organic esters and ketones which are of interest for flavour or perfume synthetic applications. Project partly supported by the PHC PROCOPE 25059YB

Sorption of methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA) to synthetic resins.

PubMed

Bi, Erping; Haderlein, Stefan B; Schmidt, Torsten C

2005-10-01

Methyl tert-butyl ether (MTBE) is a widely used gasoline oxygenate. Contamination of MTBE and its major degradation product tert-butyl alcohol (TBA) in groundwater and surface water has received great attention. However, sorption affinity and sorption mechanisms of MTBE and TBA to synthetic resins, which can be potentially used in removal of these contaminants from water, in passive sampling, or in enrichment of bacteria, have not been studied systemically. In this study, kinetic and equilibrium sorption experiments (single solute and binary mixtures) on four synthetic resins were conducted. The sorption affinity of the investigated sorbents for MTBE and TBA decreases in the order Ambersorb 563>Optipore L493>Amberlite XAD4>Amberlite XAD7, and all show higher sorption affinity for MTBE than for TBA. Binary experiments with o-xylene, a major compound of gasoline as co-contaminant, imply that all resins preferentially sorb o-xylene over MTBE or TBA, i.e., there is sorption competition. In the equilibrium aqueous concentration (Ceq) range (0.1-139.0 mg/L for MTBE, and 0.01-48.4 mg/L for TBA), experimental and modeling results as well as sorbent characteristics indicate that micropore filling and/or some other type of adsorption process (e.g., adsorption to specific sites of high sorption potential at low concentrations) rather than partitioning were the dominant sorption mechanisms. Optipore L493 has favourable sorption and desorption characteristics, and is a suitable sorbent, e.g., in bacteria enrichment or passive sampling for moderately polar compounds. However, for highly polar compounds such as TBA, Ambersorb 563 might be a better choice, especially in water treatment.

Protection of male reproductive toxicity in rats exposed to di-n-butyl phthalate during embryonic development by testosterone.

PubMed

Giribabu, Nelli; Reddy, Pamanji Sreenivasula

2017-03-01

Di-n-butyl phthalate (DBP) widely spread industrial chemical that made drastic alteration in male reproductive system. The present study elucidates the protective role of testosterone on reproductive toxicity in prenatal DBP exposed adult male rats. Pregnant rats were injected with corn oil or 100 and 500mg/kg body weight of DBP on gestation day (GD) 1, 7 and 14. F1 male rats were weaned, injected with either testosterone or vehicle. On postnatal day (PND) 100 F1 adult male rats were cohabited with untreated female rats. Then rats were sacrificed and analyzed for other reproductive end points. Prenatal DBP exposed male rat testes, seminal vesicle weight, sperm count, motility, viability and HOS tail coiled sperm were significantly decreased with increased sperm morphological abnormalities. The levels of testicular 3β, 17βHSD, serum testosterone were significantly decreased with increased FSH, LH levels in experimental rats. The fertility studies revealed that increased pre, post-implantation losses and resorptions in normal females cohabited with experimental rats. Higher testicular LPO with lower SOD, CAT and GPx activity levels in experimental rats. Administration of testosterone to prenatal DBP treated male rats showed significant protection in above all parameters. In conclusions, testosterone deteriorates prenatal DBP induced reproductive and fertility toxicity by decreased oxidative stress and increased testicular antioxidant enzymes. Copyright © 2016. Published by Elsevier Masson SAS.

An unprecedented up-field shift in the 13C NMR spectrum of the carboxyl carbons of the lantern-type dinuclear complex TBA[Ru2(O2CCH3)4Cl2] (TBA+ = tetra(n-butyl)ammonium cation).

PubMed

Hiraoka, Yuya; Ikeue, Takahisa; Sakiyama, Hiroshi; Guégan, Frédéric; Luneau, Dominique; Gillon, Béatrice; Hiromitsu, Ichiro; Yoshioka, Daisuke; Mikuriya, Masahiro; Kataoka, Yusuke; Handa, Makoto

2015-08-14

A large up-field shift (-763 ppm) has been observed for the carboxyl carbons of the dichlorido complex TBA[Ru(2)(O(2)CCH(3))(4)Cl(2)] (TBA(+) = tetra(n-butyl)ammonium cation) in the (13)C NMR spectrum (CD(2)Cl(2) at 25 °C). The DFT calculations showed spin delocalization from the paramagnetic Ru(2)(5+) core to the ligands, in agreement with the large up-field shift.

40 CFR 721.1730 - Poly(oxy-1,2-ethanediyl), α-butyl-ω-hydroxy, ester with boric acid (H3BO3).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Poly(oxy-1,2-ethanediyl), α-butyl-Ï... Significant New Uses for Specific Chemical Substances § 721.1730 Poly(oxy-1,2-ethanediyl), α-butyl-ω-hydroxy...) The chemical substance identified as poly(oxy-1,2-ethanediyl), α-butyl-ω-hydroxy, ester with boric...

40 CFR 721.1730 - Poly(oxy-1,2-ethanediyl), α-butyl-ω-hydroxy, ester with boric acid (H3BO3).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Poly(oxy-1,2-ethanediyl), α-butyl-Ï... Significant New Uses for Specific Chemical Substances § 721.1730 Poly(oxy-1,2-ethanediyl), α-butyl-ω-hydroxy...) The chemical substance identified as poly(oxy-1,2-ethanediyl), α-butyl-ω-hydroxy, ester with boric...

Levels of synthetic antioxidants (ethoxyquin, butylated hydroxytoluene and butylated hydroxyanisole) in fish feed and commercially farmed fish.

PubMed

Lundebye, A-K; Hove, H; Måge, A; Bohne, V J B; Hamre, K

2010-12-01

Several synthetic antioxidants are authorized for use as feed additives in the European Union. Ethoxyquin (EQ) and butylated hydroxytoluene (BHT) are generally added to fish meal and fish oil, respectively, to limit lipid oxidation. The study was conducted to examine the concentrations of EQ, BHT and butylated hydroxyanisole (BHA) in several commercially important species of farmed fish, namely Atlantic salmon, halibut and cod and rainbow trout, as well as concentrations in fish feed. The highest levels of BHT, EQ and BHA were found in farmed Atlantic salmon fillets, and were 7.60, 0.17 and 0.07 mg kg(-1), respectively. The lowest concentrations of the synthetic antioxidants found were in cod. The concentration of the oxidation product ethoxyquin dimer (EQDM) was more than ten-fold higher than the concentration of parent EQ in Atlantic salmon halibut and rainbow trout, whereas this dimer was not detected in cod fillets. The theoretical consumer exposure to the synthetic antioxidants EQ, BHA and BHT from the consumption of farmed fish was calculated. The contribution of EQ from a single portion (300 g) of skinned fillets of the different species of farmed fish would contribute at most 15% of the acceptable daily intake (ADI) for a 60 kg adult. The consumption of farmed fish would not contribute measurably to the intake of BHA; however, a 300 g portion of farmed Atlantic salmon would contribute up to 75% of the ADI for BHT.

A comparison of the use of vacuum metal deposition versus cyanoacrylate fuming for visualisation of fingermarks and grab impressions on fabrics.

PubMed

Fraser, Joanna; Deacon, Paul; Bleay, Stephen; Bremner, David H

2014-03-01

Both vacuum metal deposition (VMD) and cyanoacrylate fuming (CAF) are techniques used to visualise latent fingermarks on smooth non-porous surfaces such as plastic and glass. VMD was initially investigated in the 1970s as to its effectiveness for visualising prints on fabrics, but was abandoned when radioactive sulphur dioxide was found to be more effective. However, interest in VMD was resurrected in the 1990s when CAF was also used routinely. We now report on studies to determine whether VMD or CAF is the more effective technique for the detection of marks on fabrics. Four different fabrics, nylon, polyester, polycotton and cotton, were utilised during this study, along with 15 donors who ranged in their age and ability to leave fingermarks, from good to medium to poor, thus reflecting the general population. Once samples were collected they were kept for a determined time (1, 2, 3, 4, 5, 6, 7, 14, 21 or 28 days) and then treated using either the gold and zinc metal VMD process or standard cyanoacrylate fuming. The smoother fabrics, such as nylon, consistently produced greater ridge detail whereas duller fabrics, like cotton tended only to show empty prints and impressions of where the fabric had been touched, rather than any ridge details. The majority of fabrics did however allow the development of touch marks that could be targeted for DNA taping which potentially could lead to a DNA profile. Of the two techniques VMD was around 5 times more effective than CAF, producing a greater amount of ridge detail, palmar flexion creases and target areas on more samples and fabrics. Copyright © 2013 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Samuelson, Shaun D.; Louie, John D.; Sze, Daniel Y., E-mail: dansze@stanford.edu

Purpose. Avoidance of nontarget microsphere deposition via hepatoenteric anastomoses is essential to the safety of yttrium-90 radioembolization (RE). The hepatic hilar arterial network may remain partially patent after coil embolization of major arteries, resulting in persistent risk. We retrospectively reviewed cases where n-butyl cyanoacrylate (n-BCA) glue embolization was used to facilitate endovascular hepatic arterial skeletonization before RE. Methods. A total of 543 RE procedures performed between June 2004 and March 2012 were reviewed, and 10 were identified where n-BCA was used to embolize hepatoenteric anastomoses. Arterial anatomy, prior coil embolization, and technical details were recorded. Outcomes were reviewed to identifymore » subsequent complications of n-BCA embolization or nontarget RE. Results. The rate of complete technical success was 80 % and partial success 20 %, with one nontarget embolization complication resulting in a minor change in treatment plan. No evidence of gastrointestinal or biliary ischemia or infarction was identified, and no microsphere-related gastroduodenal ulcerations or other evidence of nontarget RE were seen. Median volume of n-BCA used was <0.1 ml. Conclusion. n-BCA glue embolization is useful to eliminate hepatoenteric networks that may result in nontarget RE, especially in those that persist after coil embolization of major vessels such as the gastroduodenal and right gastric arteries.« less

Pressure-induced phase transition of 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF6

NASA Astrophysics Data System (ADS)

Takekiyo, Takahiro; Hatano, Naohiro; Imai, Yusuke; Abe, Hiroshi; Yoshimura, Yukihiro

2011-03-01

We have investigated the pressure-induced Raman spectral change of 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) using Raman spectroscopy. The relative Raman intensity at 590 cm-1 of the CH2 rocking band assigned to the gauche conformer of the NCCC dihedral angle of the butyl group in the [bmim]+ cation increases when the pressure-induced liquid-crystalline phase transition occurs, while that at 610 cm-1 assigned to the trans conformer decreases. Our results show that the high-pressure phase transition of [bmim][PF6] causes the increase of the gauche conformer of the [bmim]+ cation.

Mucoadhesion mechanism of chitosan and thiolated chitosan-poly(isobutyl cyanoacrylate) core-shell nanoparticles.

PubMed

Bravo-Osuna, Irene; Vauthier, Christine; Farabollini, Alessandra; Palmieri, Giovanni Filippo; Ponchel, Gilles

2007-04-01

The study is focused on the evaluation of the potential bioadhesive behaviour of chitosan and thiolated chitosan (chitosan-TBA)-coated poly(isobutyl cyanoacrylates) (PIBCA) nanoparticles. Nanoparticles were obtained by radical emulsion polymerisation with chitosan of different molecular weight and with different proportions of chitosan/chitosan-TBA. Mucoadhesion was ex vivo evaluated under static conditions by applying nanoparticle suspensions on rat intestinal mucosal surfaces and evaluating the amount of nanoparticles remaining attached to the mucosa after incubation. The analysis of the results obtained demonstrated that the presence of either chitosan or thiolated chitosan on the PIBCA nanoparticle surface clearly enhanced the mucoadhesion behaviour thanks to non-covalent interactions (ionic interaction and hydrogen bonds) with mucus chains. Both, the molecular weight of chitosan and the proportion of chitosan-TBA in the formulation influenced the nanoparticle hydrodynamic diameter and hence their transport through the mucus layer. Improved interpenetration ability with the mucus chain during the attachment process was suggested for the chitosan of high molecular weight, enhancing the bioadhesiveness of the system. The presence of thiol groups on the nanoparticle surface at high concentration (200 x 10(-6) micromol SH/cm2) increased the mucoadhesion capacity of nanoparticles by forming covalent bonds with the cysteine residues of the mucus glycoproteins.

Effect of hyoscine-N-butyl bromide rectal suppository on labor progress in primigravid women: a randomized double-blind placebo-controlled clinical trial

PubMed Central

Makvandi, Somayeh; Tadayon, Mitra; Abbaspour, Mohammadreza

2011-01-01

Aim To determine the effects of hyoscine-N-butyl bromide (HBB) rectal suppository on labor progress in primigravid women. Methods A randomized double-blind placebo-controlled clinical trial was carried out on 130 primigravid women admitted for spontaneous labor. The women were recruited based on the inclusion and exclusion criteria and randomized into the experimental (n = 65) and control group (n = 65). In the beginning of the active phase of labor, 20 mg of HBB rectal suppository was administered to the experimental group, while a placebo suppository was administered to the control group. Cervical dilatation and duration of active phase and second stage of labor were recorded. Results The rate of cervical dilatation was 2.6 cm/h in the experimental and 1.5 cm/h in the control group (P < 0.001). The active phase and the second stage of labor were significantly shorter in the experimental group (P = 0.001 and P < 0.001, respectively). There was no significant difference between the two groups in the fetal heart rate, maternal pulse rate, blood pressure, and the APGAR score 1 and 5 minutes after birth. Conclusion Use of HBB rectal suppository in the active management of labor can shorten both the active phase and second stage of labor without significant side-effects. Registration No IRCT138804282204N1. PMID:21495198

Effect of Mesoporous Diatomite Particles on the Kinetics of SR&NI ATRP of Styrene and Butyl Acrylate

NASA Astrophysics Data System (ADS)

Khezri, Khezrollah; Ghasemi, Moosa; Fazli, Yousef

2018-05-01

Mesoporous diatomite particles were employed to prepare different poly(styrene-co-butyl acrylate)/diatomite nanocomposites. Diatomite nanoplatelets were used for in situ copolymerization of styrene and butyl acrylate by SR&NI ATRP to synthesize well-defined poly(styrene-co-butyl acrylate) nanocomposites. Nitrogen adsorption/desorption isotherm is applied to examine surface area and structural characteristics of the diatomite nanoplatelets. Evaluation of pore size distribution and morphological studies were also performed by SEM and TEM. Conversion and molecular weight determinations were carried out using gas and size exclusion chromatography respectively. Addition of 3 wt% pristine mesoporous diatomite nanoplatelets leads to increase of conversion from 73 to 89%. Molecular weight of poly(styrene-co-butyl acrylate) chains increases from 17,115 to 20,343 g·mol-1 by addition of 3 wt% pristine mesoporous diatomite; however, polydispersity index values increases from 1.14 to 1.37. Increasing thermal stability of the nanocomposites is demonstrated by TGA. Differential scanning calorimetry shows an increase in glass transition temperature from 35.26 to 39.61°C by adding 3 wt% of mesoporous diatomite nanoplatelets.

Sulfuric acid functional zirconium (or aluminum) incorporated mesoporous MCM-48 solid acid catalysts for alkylation of phenol with tert-butyl alcohol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Tingshun, E-mail: tshjiang@mail.ujs.edu.cn; Cheng, Jinlian; Liu, Wangping

2014-10-15

Several zirconium (or aluminum) incorporated mesoporous MCM-48 solid acid catalysts (SO{sub 4}{sup 2−}/Zr-MCM-48 and SO{sub 4}{sup 2−}/Al-MCM-48) were prepared by the impregnation method and their physicochemical properties were characterized by means of XRD, FT-IR, TEM, NH{sub 3}-TPD and N{sub 2} physical adsorption. Also, the catalytic activities of these solid acid catalysts were evaluated by the alkylation of phenol with tert-butyl alcohol. The effect of weight hour space velocity (WHSV), reaction time and reaction temperature on catalytic properties was also studied. The results show that the SO{sub 4}{sup 2−}/Zr-MCM-48 and SO{sub 4}{sup 2−}/Al-MCM-48 still have good mesoporous structure and long rangemore » ordering. Compared with the Zr (or Al)–MCM-48 samples, SO{sub 4}{sup 2−}/Zr-MCM-48 and SO{sub 4}{sup 2−}/Al-MCM-48 solid acid catalysts have strong acidity and exhibit high activities in alkylation reaction of phenol with tert-butyl alcohol. The SO{sub 4}{sup 2−}/Zr-MCM-48-25 (molar ratio of Si/Zr=0.04) catalyst was found to be the most promising and gave the highest phenol conversion among all catalysts. A maximum phenol conversion of 91.6% with 4-tert-butyl phenol (4-TBP) selectivity of 81.8% was achieved when the molar ratio of tert-butyl alcohol:phenol is 2:1, reaction time is 2 h, the WHSV is 2 h{sup −1} and the reaction temperature is 140 °C. - Highlights: • Sulfuric acid functional mesoporous solid acid catalysts were prepared via impregnation method. • The alkylation of phenol with tert-butyl alcohol was carried out over these solid acid catalysts. • The catalytic activity of SO{sub 4}{sup 2−}/Zr-MCM-48-25 catalyst is much higher than that of the others. • A maximum phenol conversion of 91.6% was achieved under optimum reaction conditions for SO{sub 4}{sup 2−}/Zr-MCM-48-25.« less

Effect of thyme/cumin essential oils and butylated hydroxyl anisole/butylated hydroxyl toluene on physicochemical properties and oxidative/microbial stability of chicken patties.

PubMed

Sariçoban, Cemalettin; Yilmaz, Mustafa Tahsin

2014-02-01

In this study, effects of thyme/cumin essential oils (EO) and butylated hydroxyl anisole (BHA)/butylated hydroxyl toluene (BHT) on physicochemical properties and storage stability of chicken patties were compared in different storage periods (0, 3, 7, 14, 21, and 28 d). It was found that there were significant (P < 0.05) differences between physicochemical properties of patty samples treated with EO and the synthetic antioxidants. The EO showed similar performance to those of BHA and BHT in limiting TBARS values of chicken patty samples. Similarity in performance was also the case for microbial stability (total aerobic mesophilic, psychrotrophic, lactic acid, and coliform bacteria as well as molds and yeasts); namely, their effects were significant (P < 0.05). Effect of thyme EO was significant (P < 0.05) and remarkable, not allowing any coliform bacteria to grow in the samples. Given that EO were obtained from natural sources, the data suggested that the EO might be more useful than their synthetic counterparts, BHA and BHT, as additives for chicken patties to maintain oxidative/microbial stability and increase shelf life.

TREATMENT OF METHYL TERT-BUTYL ETHER CONTAMINATED WATER USING PHOTOCATALYSIS

EPA Science Inventory

The feasibility of photo-oxidation treatment of methyl tert-butyl ether (MTBE) in water was investigated in three ways, 1) using a slurry falling film photo-reactor, 2) a batch solar reactor system, and 3) a combination of air-stripping and gas phase photooxidation system. MTBE-c...

Butyl Rubber Stoppers Increase the Shelf Life of Prereduced, Anaerobically Sterilized Media

PubMed Central

Fulghum, Robert S.; Worthington, John M.

1977-01-01

Butyl rubber stoppers as compared with neoprene or black rubber stoppers significantly increased the shelf life of prereduced, anaerobically sterilized media for growth of obligately anaerobic bacteria. PMID:879778

Oxidation of 2,6-di-tert-butyl-4-methylphenol. The structure of C14H22O3

USGS Publications Warehouse

Yohe, G.R.; Dunbar, J.E.; Lansford, M.W.; Pedrotti, R.L.; Scheidt, F.M.; Lee, F.G.H.; Smith, E.C.

1959-01-01

The acidic compound C14H22O3, previously reported without assignment of structure as an oxidation product of 2,6-di-tert-butyl-4-methylphenol, is now believed to be DL-trans-5,6-di-tert-butyl-2-hydroxy-1,4-diketo-2-cyclohexene (I). Chemical properties are described and infrared spectra are presented in support of this structure. This structure is of interest in relation to the problem of the existence of o-di-tert-alkylbenzene derivatives. The relatively easy racemization of optically active I suggests that its completely enolized form, 5,6-di-tert-butyl-1,2,4-trihydroxybenzene, is capable of transitory existence.

Effects of gestational exposure to di-n-butyl phthalate and mineral oil on testis development of the Mongolian gerbil.

PubMed

Christante, C M; Pinto-Fochi, M E; Negrin, A C; Taboga, S R; Góes, R M

2018-06-14

Phthalate esters are endocrine disrupters that can affect the development of the testis in a species-specific manner. However, their interference in the male gonads of the Mongolian gerbil is unknown. The aim of the present study was to evaluate whether gestational exposure to di-n-butyl phthalate (DBP) interferes with the development of the gerbil testis during the first six weeks of life. Males were evaluated at 1, 7, 14, 28, 35 and 42 days of age in an untreated (control) group or groups exposed from 8 to 23 days gestation to DBP (100mgkg-1day-1 in mineral oil) or vehicle by maternal gavage. DBP exposure impaired cell proliferation within the seminiferous cords at birth, but increased proliferation at the end of the first week, when higher testosterone concentrations were observed. The vehicle (mineral oil) reduced the total number of gonocytes and attenuated the decrease in testosterone concentrations at 7 days. The vehicle also altered gonocyte relocation at 14 days and increased oestrogen concentrations at 28 days by approximately 112%. In summary, both DBP and oil interfered in gonadal development and testosterone plasma concentrations in the first week of postnatal life. However, the changes observed at the beginning of puberty were not seen after exposure to DBP, indicating a more harmful effect of mineral oil in this period.

N-heterocycle carbene (NHC)-ligated cyclopalladated N,N-dimethylbenzylamine: a highly active, practical and versatile catalyst for the Heck-Mizoroki reaction.

PubMed

Peh, Guang-Rong; Kantchev, Eric Assen B; Zhang, Chi; Ying, Jackie Y

2009-05-21

The wide dissemination of catalytic protocols in academic and industrial laboratories is facilitated by the development of catalysts that are not only highly active but also user-friendly, stable to moisture, air and long term storage and easy to prepare on a large scale. Herein we describe a protocol for the Heck-Mizoroki reaction mediated by cyclopalladated N,N-dimethylbenzylamine (dmba) ligated with a N-heterocyclic carbene, 1,3-bis(mesityl)imidazol-2-ylidene (IMes), that fulfils these criteria. The precatalyst can be synthesized on approximately 100 g scale by a tri-component, sequential, one-pot reaction of N,N-dimethylbenzylamine, PdCl2 and IMes.HCl in refluxing acetonitrile in air in the presence of K2CO3. This single component catalyst is stable to air, moisture and long term storage and can be conveniently dispensed as a stock solution in NMP. It mediates the Heck-Mizoroki reaction of a range of aryl- and heteroaryl bromides in reagent grade NMP at the 0.1-2 mol% range without the need for rigorous anhydrous techniques or a glovebox, and is active even in air. The catalyst is capable of achieving very high levels of catalytic activity (TON of up to 5.22 x 10(5)) for the coupling of a deactivated arylbromide, p-bromoanisole, with tBu acrylate as a benchmark substrate pair. A wide range of aryl bromides, iodides and, for the first time with a NHC-Pd catalyst, a triflate was coupled with diverse acrylate derivatives (nitrile, tert-butyl ester and amides) and styrene derivatives. The use of excess (>2 equiv.) of the aryl bromide and tert-butyl acrylate leads to mixture of tert-butyl beta,beta-diarylacrylate and tert-butyl cinnamate derivatives depending on the substitution pattern of the aryl bromide. Electron rich m- and p-substituted arylbromides give the diarylated products exclusively, whereas electron-poor aryl bromides give predominantly mono-arylated products. For o-substituted aryl bromides, no doubly arylated products could be obtained under any

Molecular recognition of curcumin (Indian Ayurvedic medicine) by the supramolecular probe, p-t-butyl calix(8)arene

NASA Astrophysics Data System (ADS)

Meenakshi, C.; Jayabal, P.; Ramakrishnan, V.

2014-06-01

The thermodynamic property of the host-guest complexes formed between the curcumin, component of Indian Ayurvedic medicine turmeric, a drug molecule, with the supra molecule, p-t-butyl calix(8)arene was studied. p-t-Butyl calix(8)arene has been used as a host molecule and curcumin as a guest molecule. Optical absorption spectral studies were carried out to investigate the molecular recognition properties of p-t-butyl calix(8)arene with curcumin. The stochiometry of the host-guest complexes formed and the binding constant were determined. An interesting 1:1 and 4:1 stochiometric host-guest complexes were formed. Job's continuous method of variation and Benesi-Hildebrand expression were used for the determination of binding constant and the stochiometry of the host-guest complex formed.

Utilization of deep-sea microbial esterase PHE21 to generate chiral sec-butyl acetate through kinetic resolutions.

PubMed

Wang, Yilong; Xu, Yongkai; Zhang, Yun; Sun, Aijun; Hu, Yunfeng

2018-06-08

We previously identified and characterized 1 novel deep-sea microbial esterase PHE21 and used PHE21 as a green biocatalyst to generate chiral ethyl (S)-3-hydroxybutyrate, 1 key chiral chemical, with high enantiomeric excess and yield through kinetic resolution. Herein, we further explored the potential of esterase PHE21 in the enantioselective preparation of secondary butanol, which was hard to be resolved by lipases/esterases. Despite the fact that chiral secondary butanols and their ester derivatives were hard to prepare, esterase PHE21 was used as a green biocatalyst in the generation of (S)-sec-butyl acetate through hydrolytic reactions and the enantiomeric excess, and the conversion of (S)-sec-butyl acetate reached 98% and 52%, respectively, after process optimization. Esterase PHE21 was also used to generate (R)-sec-butyl acetate through asymmetric transesterification reactions, and the enantiomeric excess and conversion of (R)-sec-butyl acetate reached 64% and 43%, respectively, after process optimization. Deep-sea microbial esterase PHE21 was characterized to be a useful biocatalyst in the kinetic resolution of secondary butanol and other valuable chiral secondary alcohols. © 2018 Wiley Periodicals, Inc.

REFINED PBPK MODEL OF AGGREGATE EXPOSURE TO METHYL TERTIARY-BUTYL ETHER

EPA Science Inventory

Aggregate (multiple pathway) exposures to methyl tertiary-butyl ether (MTBE) in air and water occur via dermal, inhalation, and oral routes. Previously, physiologically-based pharmacokinetic (PBPK) models have been used to quantify the kinetic behavior of MTBE and its primary met...

Effect of substrate interaction on the degradation of methyl tert-butyl ether, benzene, toluene, ethylbenzene, and xylene by Rhodococcus sp.

PubMed

Lee, Eun-Hee; Cho, Kyung-Suk

2009-08-15

It was examined the substrate interactions of benzene (B), tolulene (T), ethylbenzene (E), xylene (X), and methyl tert-butyl ether (M) in binary, ternary, quaternary, and quinary mixtures by Rhodococcus sp. EH831 that could aerobically degrade all of five single components. The specific degradation rates (SDRs) of B, T, E, X, and M were 234, 913, 131, 184 and 139 micromol g-dry cell weight (DCW)(-1)h(-1), respectively. In binary, ternary, quaternary, and quinary mixtures of them, ethylbenzene was the strongest inhibitor for the other substrates, and methyl tert-butyl ether was the weakest inhibitor. Interestingly, no degradation of benzene and methyl tert-butyl ether was found in the coexistence of ethylbenzene. The degradation of benzene followed only after toluene became exhausted when both was present. Ethylbenzene was least inhibited by methyl tert-butyl ether and most inhibited by toluene.

Effect of di(n-butyl) phthalate on testicular oxidative damage and antioxidant enzymes in hyperthyroid rats.

PubMed

Lee, Ena; Ahn, Mee Young; Kim, Hee Jin; Kim, In Young; Han, Soon Young; Kang, Tae Seok; Hong, Jin Hwan; Park, Kui Lea; Lee, Byung Mu; Kim, Hyung Sik

2007-06-01

This study compared the effects of di(n-butyl) phthalate (DBP) on the oxidative damage and antioxidant enzymes activity in testes of hyperthyroid rats. Hyperthyroidism was induced in pubertal male rats by intraperitoneal injection of triiodothyronine (T3, 10 microg/kg body weight) for 30 days. An oral dose of DBP (750 mg/kg) was administered simultaneously to normal or hyperthyroid (T3) rats over a 30-day period. No changes in body weight were observed in the hyperthyroid groups (T3, T3 + DBP) compared with controls. There were significantly higher serum T3 levels observed in the hyperthyroid rats than in the control, but the serum thyroid stimulating hormone levels were markedly lower in the hyperthyroid rats. DBP significantly decreased the weight of the testes in the normal (DBP) and hyperthyroid (T3 + DBP) groups. The serum testosterone concentrations were significantly lower in only DBP group. DBP significantly increased the 8-hydroxy-2-deoxyguanosine (8-OHdG) level in the testes, whereas the DBP-induced 8-OHdG levels were slightly higher in T3 + DBP group. Superoxide dismutase and glutathione peroxidase activities were significantly higher in the testes of the DBP or T3 + DBP groups. Catalase (CAT) activity was significantly higher in the DBP treatment group, but the T3 + DBP group showed slightly lower DBP-induced CAT activity. The testicular expression of thyroid hormone receptor alpha-1 (TRalpha-1) was significantly higher in the DBP groups, and androgen receptor (AR) expression was not detected in the DBP treatment group. In addition, DBP significantly increased the peroxisome proliferator-activated receptor-r (PPAR-r) levels in the testis. These results suggest that hyperthyroidism can cause a change in the expression level of PPAR-r in testes, and may increase the levels of oxidative damage induced by the metabolic activation of DBP.

Sources and historical record of tin and butyl-tin species in a Mediterranean bay (Toulon Bay, France).

PubMed

Pougnet, Frédérique; Schäfer, Jörg; Dutruch, Lionel; Garnier, Cédric; Tessier, Erwan; Dang, Duc Huy; Lanceleur, Laurent; Mullot, Jean-Ulrich; Lenoble, Véronique; Blanc, Gérard

2014-05-01

Concentrations of inorganic tin (Sn(inorg)), tributyltin (TBT) and its degradation products dibutyltin (DBT) and monobutyltin (MBT) were measured in surface sediments and in two cores from the Toulon Bay, hosting the major French military harbour. Anticipating planned dredging, the aim of the present work is to map and evaluate for the first time the recent and historic contamination of these sediments by inorganic and organic Sn species derived from antifouling paints used for various naval domains including military, trade, tourism and leisure. Tin and butyl-Sn concentrations in the bay varied strongly (4 orders of magnitude), depending on the site, showing maximum values near the shipyards. The concentrations of total Sn (1.3-112 μg g(-1)), TBT (<0.5-2,700 ng g(-1)), DBT (<0.5-1,800 ng g(-1)) and MBT (0.5-1,000 ng g(-1)) generally decreased towards the open sea, i.e. as a function of both distance from the presumed main source and bottom currents. Progressive degradation state of the butyl-Sn species according to the same spatial scheme and the enrichment factors support the scenario of a strongly polluted bay with exportation of polluted sediment to the open Mediterranean. Low degradation and the historical records of butyl-Sn species in two (210)Pb-dated sediment cores, representative of the Northern Bay, are consistent with the relatively recent use of TBT by military shipyards and confirm maximum pollution during the 1970s, which will persist in the anoxic sediments for several centuries. The results show that (a) degradation kinetics of butyl-Sn species depend on environmental conditions, (b) the final degradation product Sn(inorgBT) is by far the dominant species after 10-12 half-life periods and (c) using recent data to reliably assess former TBT contamination requires the use of a modified butyl-Sn degradation index BDI(mod). Resuspension of extremely contaminated subsurface sediments by the scheduled dredging will probably result in mobilization of

Single-stage excision of localized head and neck venous malformations using preoperative glue embolization.

PubMed

Tieu, David D; Ghodke, Basavaraj V; Vo, Nghia J; Perkins, Jonathan A

2013-04-01

Describe single-stage removal of head and neck venous malformations using percutaneous embolization with n-butyl cyanoacrylate (n-BCA) glue prior to surgical resection. Case series with chart review. Tertiary-care pediatric hospital. A total of 169 venous malformations were identified between 2000 and 2012, and 102 (60.1%) were in the head and neck. Thirty-five of 102 (34.3%) were observed, 56 of 102 (54.9%) had invasive therapy, and 11 of 102 (10.8%) underwent n-BCA embolization and surgery ("GES procedure"). The median age of the glue embolization and surgery cohort was 14 years (range, 6-19), and 7 of 11 (63.6%) were female. Treated venous malformations involved the oral cavity/tongue (4/11; 36.4%) and parotid/face (7/11; 63.6%). During facial lesion excision, intraoperative facial nerve monitoring was used. All surgical sites (11/11) were closed primarily. No patient in this cohort had any posttreatment nerve deficits, dysarthria, and dysphagia or lesion persistence. Localized venous malformations can be treated with preoperative percutaneous embolization with n-BCA glue followed by surgical excision. This technique, with selective motor nerve monitoring, appears safe and allows for complete venous malformation removal with limited nerve dissection, to allow maximal tissue and functional preservation.

The Epoxidation of 2,5-Di-tert-butyl-1,4-benzoquinone: A Consecutive Reaction for the Physical Chemistry Laboratory.

ERIC Educational Resources Information Center

Hairfield, E. M.; And Others

1985-01-01

Reports a consecutive first-order reaction for which the concentrations of reactant, intermediate, and products can be determined simulataneously. This reaction is the epoxidation of 2,5-di-tert-butyl-1,4-benzoquinone (I) by alkaline hydroperoxidation using tert-butyl hydroperoxide and benzyltrimethylammonium hydroxide (Triton B) catalyst.…

PHOTOCATALYTIC OXIDATION OF METHYL-TERT-BUTYL ETHER FOR DRINKING WATER TREATMENT

EPA Science Inventory

The photo-oxidation of methyl tert-butyl ether (MTBE) in water was investigated to determine the feasibility of using photocatalysis for the treatment of MTBE-contaminated drinking water. The feasibility assessment was conducted using slurries of titanium dioxide in both a photo-...

Crystal structure of 9-butyl-6-[2-(pyridin-4-yl)ethen­yl]carbazol-3-amine

PubMed Central

Zhang, Ping; Bai, Xiang-Yang; Zhang, Ting

2015-01-01

The asymmetric unit of the title compound, C23H23N3, consists of two mol­ecules, A and B, with different conformations. In mol­ecule A, the dihedral angle between the carbazole ring system (r.m.s. deviation = 0.028 Å) and the pyridine ring is 20.28 (9)° and the N—C—C—C torsion angle of the butyl side chain is −63.4 (3)°. The equivalent data for mol­ecule B are 0.065 Å, 48.28 (11)° and 61.0 (3)°, respectively. In the crystal, the components are connected by weak N—H⋯N hydrogen bonds, generating [030] C(14) chains of alternating A and B mol­ecules. PMID:25995940

IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (Etbe) ...

EPA Pesticide Factsheets

In August 2013, EPA released the draft literature searches and associated search strategies, evidence tables, and exposure response arrays for ETBE to obtain input from stakeholders and the public prior to developing the draft IRIS assessment. Specifically, EPA was interested in comments on the following: Draft literature search strategies The approach for identifying studies The screening process for selecting pertinent studies The resulting list of pertinent studies Preliminary evidence tables The process for selecting studies to include in evidence tables The quality of the studies in the evidence tables The literature search strategy, which describes the processes for identifying scientific literature, contains the studies that EPA considered and selected to include in the evidence tables. The preliminary evidence tables and exposure-response arrays present the key study data in a standardized format. The evidence tables summarize the available critical scientific literature. The exposure-response figures provide a graphical representation of the responses at different levels of exposure for each study in the evidence table. The draft Toxicological Review of Ethyl Tertiary Butyl Ether provides scientific support and rationale for the hazard and dose-response assessment pertaining to chronic exposure to ethyl tertiary butyl ether.

Isotope effects and the temperature dependences of the hyperfine coupling constants of muoniated sec-butyl radicals in condensed phases.

PubMed

Fleming, Donald G; Bridges, Michael D; Arseneau, Donald J; Chen, Ya Kun; Wang, Yan Alexander

2011-04-07

Reported here is the first μSR study of the muon (A(μ)) and proton (A(p)) β-hyperfine coupling constants (Hfcc) of muoniated sec-butyl radicals, formed by muonium (Mu) addition to 1-butene and to cis- and trans-2-butene. The data are compared with in vacuo spin-unrestricted MP2 and hybrid DFT/B3YLP calculations reported in the previous paper (I), which played an important part in the interpretation of the data. The T-dependences of both the (reduced) muon, A(μ)′(T), and proton, A(p)(T), Hfcc are surprisingly well explained by a simple model, in which the calculated Hfcc from paper I at energy minima of 0 and near ±120° are thermally averaged, assuming an energy dependence given by a basic 2-fold torsional potential. Fitted torsional barriers to A(μ)′(T) from this model are similar (~3 kJ/mol) for all muoniated butyl radicals, suggesting that these are dominated by ZPE effects arising from the C−Mu bond, but for A(p)(T) exhibit wide variations depending on environment. For the cis- and trans-2-butyl radicals formed from 2-butene, A(μ)′(T) exhibits clear discontinuities at bulk butene melting points, evidence for molecular interactions enhancing these muon Hfcc in the environment of the solid state, similar to that found in earlier reports for muoniated tert-butyl. In contrast, for Mu−sec-butyl formed from 1-butene, there is no such discontinuity. The muon hfcc for the trans-2-butyl radical are seemingly very well predicted by B3LYP calculations in the solid phase, but for sec-butyl from 1-butene, showing the absence of further interactions, much better agreement is found with the MP2 calculations across the whole temperature range. Examples of large proton Hfcc near 0 K are also reported, due to eclipsed C−H bonds, in like manner to C−Mu, which then also exhibit clear discontinuities in A(p)(T) at bulk melting points. The data suggest that the good agreement found between theory and experiment from the B3LYP calculations for eclipsed bonds in

Differential Response to Abiraterone Acetate and Di-n-butyl Phthalate in an Androgen-Sensitive Human Fetal Testis Xenograft Bioassay

PubMed Central

Boekelheide, Kim

2014-01-01

In utero exposure to antiandrogenic xenobiotics such as di-n-butyl phthalate (DBP) has been linked to congenital defects of the male reproductive tract, including cryptorchidism and hypospadias, as well as later life effects such as testicular cancer and decreased sperm counts. Experimental evidence indicates that DBP has in utero antiandrogenic effects in the rat. However, it is unclear whether DBP has similar effects on androgen biosynthesis in human fetal testis. To address this issue, we developed a xenograft bioassay with multiple androgen-sensitive physiological endpoints, similar to the rodent Hershberger assay. Adult male athymic nude mice were castrated, and human fetal testis was xenografted into the renal subcapsular space. Hosts were treated with human chorionic gonadotropin for 4 weeks to stimulate testosterone production. During weeks 3 and 4, hosts were exposed to DBP or abiraterone acetate, a CYP17A1 inhibitor. Although abiraterone acetate (14 d, 75mg/kg/d po) dramatically reduced testosterone and the weights of androgen-sensitive host organs, DBP (14 d, 500mg/kg/d po) had no effect on androgenic endpoints. DBP did produce a near-significant trend toward increased multinucleated germ cells in the xenografts. Gene expression analysis showed that abiraterone decreased expression of genes related to transcription and cell differentiation while increasing expression of genes involved in epigenetic control of gene expression. DBP induced expression of oxidative stress response genes and altered expression of actin cytoskeleton genes. PMID:24284787

STRUCTURES AND BINDING ENERGIES OF METHYL TERT-BUTYL ETHER-WATER COMPLEXES

EPA Science Inventory

Methyl tert-butyl ether (MTBE) is a well-known environmental contaminant owing to its high solubility in water. Since the early 1990s, MTBE has been added to gasoline to improve air quality in some metropolitan areas of the United States. Improved air quality was, however, achiev...

Facile and Reliable in Situ Polymerization of Poly(Ethyl Cyanoacrylate)-Based Polymer Electrolytes toward Flexible Lithium Batteries.

PubMed

Cui, Yanyan; Chai, Jingchao; Du, Huiping; Duan, Yulong; Xie, Guangwen; Liu, Zhihong; Cui, Guanglei

2017-03-15

Polycyanoacrylate is a very promising matrix for polymer electrolyte, which possesses advantages of strong binding and high electrochemical stability owing to the functional nitrile groups. Herein, a facile and reliable in situ polymerization strategy of poly(ethyl cyanoacrylate) (PECA) based gel polymer electrolytes (GPE) via a high efficient anionic polymerization was introduced consisting of PECA and 4 M LiClO 4 in carbonate solvents. The in situ polymerized PECA gel polymer electrolyte achieved an excellent ionic conductivity (2.7 × 10 -3 S cm -1 ) at room temperature, and exhibited a considerable electrochemical stability window up to 4.8 V vs Li/Li + . The LiFePO 4 /PECA-GPE/Li and LiNi 1.5 Mn 0.5 O 4 /PECA-GPE/Li batteries using this in-situ-polymerized GPE delivered stable charge/discharge profiles, considerable rate capability, and excellent cycling performance. These results demonstrated this reliable in situ polymerization process is a very promising strategy to prepare high performance polymer electrolytes for flexible thin-film batteries, micropower lithium batteries, and deformable lithium batteries for special purpose.

IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) (Public Comment Draft)

EPA Science Inventory

In September 2016, the U.S. Environmental Protection Agency's (USEPA) released the draft Integrated Risk Information System (IRIS) Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE). Consistent with the 2013 IRIS Enhancements, draft IRIS assessments are released prior to e...

PHYSIOLOGICALLY BASED PHARMACOKINETIC MODEL FOR HUMAN EXPOSURES TO METHYL TERTIARY-BUTYL ETHER

EPA Science Inventory

Humans can be exposed by inhalation, ingestion, or dermal absorption to methyl tertiary-butyl ether (MTBE), an oxygenated fuel additive, from contaminated water sources. The purpose of this research was to develop a physiologically based pharmacokinetic model describing in human...

Identification of tert-Butyl Cations in Zeolite H-ZSM-5: Evidence from NMR Spectroscopy and DFT Calculations.

PubMed

Dai, Weili; Wang, Chuanming; Yi, Xianfeng; Zheng, Anmin; Li, Landong; Wu, Guangjun; Guan, Naijia; Xie, Zaiku; Dyballa, Michael; Hunger, Michael

2015-07-20

Experimental evidence for the presence of tert-butyl cations, which are important intermediates in acid-catalyzed heterogeneous reactions, on solid acids has still not been provided to date. By combining density functional theory (DFT) calculations with (1)H/(13)C magic-angle-spinning NMR spectroscopy, the tert-butyl cation was successfully identified on zeolite H-ZSM-5 upon conversion of isobutene by capturing this intermediate with ammonia. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Differential effect of silybin on the Fe2+-ADP and t-butyl hydroperoxide-induced microsomal lipid peroxidation.

PubMed

Valenzuela, A; Guerra, R

1986-02-15

We have observed a differential effect of silybin dihemisuccinate on rat liver microsomal oxygen consumption and on lipid peroxidation induced by NADPH-Fe2+-ADP and t-butyl hydroperoxide. These results are ascribed to the antioxidant properties of the flavonoid. The differences observed in the effect of the catalysts may be a consequence of the different capacity of silybin to act as a scavenger of free radicals formed by NADPH-Fe2+-ADP or t-butyl hydroperoxide.

IRIS Toxicological Review of Tert-Butyl Alcohol (Tert-Butanol) ...

EPA Pesticide Factsheets

On April 29, 2016, the Toxicological Review of tert-Butyl Alcohol (tert-Butanol) (Public Comment Draft) was released for public comment. The draft Toxicological Review and charge were reviewed internally by EPA and by other federal agencies and the Executive Office of the President during Step 3 (Interagency Science Consultation) before public release. As part of the IRIS process, all written interagency comments on IRIS assessments will be made publicly available. Accordingly, interagency comments with EPA's response and the interagency science consultation drafts of the IRIS Toxicological Review of tert-Butanol and charge to external peer reviewers are posted on this site. EPA is undertaking a new health assessment for t-butyl alcohol (tert-butanol) for the Integrated Risk Information System (IRIS). The outcome of this project will be a Toxicological Review and IRIS and IRIS Summary of TBA that will be entered on the IRIS database. IRIS is an EPA database containing Agency scientific positions on potential adverse human health effects that may result from chronic (or lifetime) exposure to chemicals in the environment. IRIS contains chemical-specific summaries of qualitative and quantitative health information to evaluate potential public health risks associated with environmental contaminants. The IRIS database is relied on for the development of risk assessments, site-specific environmental decisions, and rule making.

IRIS Toxicological Review of Ethylene Glycol Mono-Butyl ...

EPA Pesticide Factsheets

EPA released the draft report, Toxicological Review for Ethylene Glycol Mono-Butyl Ether , that was distributed to Federal agencies and White House Offices for comment during the Science Discussion step of the IRIS Assessment Development Process. Comments received from other Federal agencies and White House Offices are provided below with external peer review panel comments. EPA is conducting a peer review of the scientific basis supporting the human health hazard and dose-response assessment of EGBE that will appear on the Integrated Risk Information System (IRIS) database.

INFLUENCE OF METHYL TERT-BUTYL ETHER (MTBE) ON LAKE WATER ALGAE

EPA Science Inventory

Methyl tert-butyl ether (MTBE) has been used as an octane booster in gasoline in the United States since the 1970s. MTBE use increased greatly in the 1990s with the implementation of the Clean Air Act Amendments of 1990. The MTBE enhanced a more complete combustion of fuel hydroc...

Critical behavior in the system cyclopentanone + water + secondary butyl alcohol

NASA Astrophysics Data System (ADS)

Krishna, U. Santhi; Unni, P. K. Madhavan

2018-05-01

We report detailed measurements of coexistence surface in the ternary system cylcopentanone + water + secondary butyl alcohol. The coexistence surface is seen to have an unusual tunnel like feature and is a potential system in which special critical points such as the Quadruple Critical Point (QCP) could be studied. Analysis of coexistence curves indicates that the system shows 3D-Ising like critical behavior.

Prepubertal mouse testis growth and maturation and androgen production are acutely sensitive to di-n-butyl phthalate.

PubMed

Moody, Sarah; Goh, Hoey; Bielanowicz, Amanda; Rippon, Paul; Loveland, Kate L; Itman, Catherine

2013-09-01

Phthalates are plasticizers with widespread industrial, domestic, and medical applications. Epidemiological data indicating increased incidence of testicular dysgenesis in boys exposed to phthalates in utero are reinforced by studies demonstrating that phthalates impair fetal rodent testis development. Because humans are exposed to phthalates continuously from gestation through adulthood, it is imperative to understand what threat phthalates pose at other life stages. To determine the impact during prepuberty, we assessed the consequences of oral administration of 1 to 500 mg di-n-butyl phthalate (DBP)/kg/d in corn oil to wild-type (C57BL/6J) male mice from 4 to 14 days of age. Dose-dependent effects on testis growth correlated with reduced Sertoli cell proliferation. Histological and immunohistochemical analyses identified delayed spermatogenesis and impaired Sertoli cell maturation after exposure to 10 to 500 mg DBP/kg/d. Interference with the hypothalamic-pituitary-gonadal axis was indicated in mice fed 500 mg DBP/kg/d, which had elevated circulating inhibin but no change in serum FSH. Increased immunohistochemical staining for inhibin-α was apparent at doses of 10 to 500 mg DBP/kg/d. Serum testosterone and testicular androgen activity were lower in the 500 mg DBP/kg/d group; however, reduced anogenital distance in all DBP-treated mice suggested impaired androgen action at earlier time points. Long-term effects were evident, with smaller anogenital distance and indications of disrupted spermatogenesis in adult mice exposed prepubertally to doses from 1 mg DBP/kg/d. These data demonstrate the acute sensitivity of the prepubertal mouse testis to DBP at doses 50- to 500-fold lower than those used in rat and identify the upregulation of inhibin as a potential mechanism of DBP action.

Di-iso-Butyl Phthalate MATERNAL AND FETAL DATA FROM ...

EPA Pesticide Factsheets

this file contains the raw data on the effects of in utero administration of di-iso-butyl phthalate on maternal weight gain during dosing and the numbers of fetuses and fetal resorptions. The data have all been previously published, as described on the file metadata sheet. Raw data file from our published studies on DIBP specifically requested (6/14/2016) by NCEA scientists for analysis and inclusion in their assessment of this chemical.

Comprehensive testing to measure the response of butyl rubber to Hanford tank waste simulant

DOE Office of Scientific and Technical Information (OSTI.GOV)

NIGREY,PAUL J.

This report presents the findings of the Chemical Compatibility Program developed to evaluate plastic packaging components that may be incorporated in packaging mixed-waste forms for transportation. Consistent with the methodology outlined in this report, the authors performed the second phase of this experimental program to determine the effects of simulant Hanford tank mixed wastes on packaging seal materials. That effort involved the comprehensive testing of five plastic liner materials in an aqueous mixed-waste simulant. The testing protocol involved exposing the materials to {approximately}143, 286, 571, and 3,670 krad of gamma radiation and was followed by 7-, 14-, 28-, 180-day exposuresmore » to the waste simulant at 18, 50, and 60 C. Butyl rubber samples subjected to the same protocol were then evaluated by measuring seven material properties: specific gravity, dimensional changes, mass changes, hardness, compression set, vapor transport rates, and tensile properties. From the analyses, they determined that butyl rubber has relatively good resistance to radiation, this simulant, and a combination of these factors. These results suggest that butyl rubber is a relatively good seal material to withstand aqueous mixed wastes having similar composition to the one used in this study.« less

Lung toxicity and tumor promotion by hydroxylated derivatives of 2,6-di-tert-butyl-4-methylphenol (BHT) and 2-tert-butyl-4-methyl-6-iso-propylphenol: correlation with quinone methide reactivity.

PubMed

Kupfer, Rene; Dwyer-Nield, Lori D; Malkinson, Alvin M; Thompson, John A

2002-08-01

Acute pulmonary toxicity and tumor promotion by the food additive 2,6-di-tert-butyl-4-methylphenol (BHT) in mice are well documented. These effects have been attributed to either of two quinone methides, 2,6-di-tert-butyl-4-methylenecyclohexa-2,5-dienone (BHT-QM) formed through direct oxidation of BHT by pulmonary cytochrome P450 or a quinone methide formed by hydroxylation of a tert-butyl group of BHT (to form BHTOH) followed by oxidation of this metabolite to BHTOH-QM. BHTOH-QM is a more reactive electrophile compared to BHT-QM due to intramolecular interactions of the side-chain hydroxyl with the carbonyl oxygen. To further examine this bioactivation pathway, an analogue of BHTOH was prepared, 2-tert-butyl-6-(1'-hydroxy-1'-methyl)ethyl-4-methylphenol (BPPOH), that is structurally very similar to BHTOH but forms a quinone methide (BPPOH-QM) capable of more efficient intramolecular hydrogen bonding and, therefore, higher electrophilicity than BHTOH-QM. BPPOH-QM was synthesized and its reactivity with water, methanol, and glutathione determined to be >10-fold higher than that of BHTOH-QM. The conversions of BPPOH and BHTOH to quinone methides in lung microsomes from male BALB/cByJ mice were quantitatively similar, but in vivo the former was pneumotoxic at one-half of the dose required for the latter and one-eighth of the dose required for BHT, as determined by increased lung weight:body weight ratios following a single i.p. injection. Similar differences were found in the doses of BHT, BHTOH, or BPPOH required for tumor promotion after a single initiating dose of 3-methylcholanthrene followed by three weekly injections of the phenol. The downregulaton of calpain II, previously shown to accompany lung tumor promotion by BHT and BHTOH, also occurred with BPPOH. The correlation between biologic activities of these phenols and the reactivities of their corresponding quinone methides provides additional support for the role of BHTOH-QM as the principal metabolite

Preoperative Direct Puncture Embolization of Advanced Juvenile Nasopharyngeal Angiofibroma in Combination with Transarterial Embolization: An Analysis of 22 Consecutive Patients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lv Mingming, E-mail: lvmingming001@163.com; Fan, Xin-dong, E-mail: fanxindong@yahoo.com.cn; Su Lixin, E-mail: sulixin1975@126.com

2013-02-15

ObjectiveThis study was designed to evaluate the clinical application of preoperative auxiliary embolization for juvenile nasopharyngeal angiofibroma (JNA) by direct puncture embolization (DPE) of the tumor in combination with transarterial embolization (TAE). The study included 22 patients. An 18-gauge needle was used to puncture directly into the tumor, and 20-25 % N-butyl cyanoacrylate was injected under the guidance of fluoroscopy after confirming the placement of the needle into the JNA and no leaking into the surrounding tissue. Tumors were obstructed later via TAE. The supplying arteries of JNA were from branches of the internal carotid and external carotid arteries. Controlmore » angiography showed the obliteration of contrast stain in the entire tumor mass and the distal supplying arteries disappeared after DPE in combination with TAE. Surgical resection was performed within 4 days after embolization and none of the patients required blood transfusion. The use of DPE in combination with TAE was a safe, feasible, and efficacious method. It can devascularize effectively the JNAs and reduce intraoperative bleeding when JNAs are extirpated.« less

Bronchial Artery Aneurysm Embolization with NBCA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aburano, Hiroyuki, E-mail: aburano-3@r.vodafone.ne.jp; Kawamori, Yasuhiro; Horiti, Yasushi

2006-12-15

We present a case of asymptomatic bronchial artery aneurysm that formed a fistula with part of the pulmonary artery (there was no definite fistula with the pulmonary vein). We were able to catheterize the feeding vessel but could not reach the aneurysm. We therefore injected a mixture of N-butyl-2-cyanoacrylate (NBCA; Histoacryl, B. Braun, Melsungen, Germany) and iodized oil (Lipiodol; Guerbet, Aulnay-sous-Bois, France) from the feeding vessel. The fistula, aneurysm, and feeding vessel were almost totally occluded. After embolization, the patient coughed a little; there were no other definite side effects or complications. One and 3 months later, on chest CT,more » the aneurysm was almost completely occupied with hyperattenuating NBCA-Lipiodol embolization. NBCA is a liquid embolization material whose time to coagulation after injection can be controlled by diluting it with Lipiodol. It is therefore possible to embolize an aneurysm, feeding vessels, and efferent vessels (in our case, it was a fistula) by using an NBCA-Lipiodol mixture of an appropriate concentration, regardless of whether the catheter can reach the aneurysm or not.« less

IRIS Toxicological Review of Tert-Butyl Alcohol (Tert-Butanol) (Public Comment Draft)

EPA Science Inventory

EPA is developing an Integrated Risk Information System (IRIS) assessment of tert-butyl Alcohol (tert-butanol) and has released the public comment draft assessment for public comment and external peer review. When final, the assessment will appear on the IRIS databa...

IRIS Toxicological Review of Tert-Butyl Alcohol (Tert-Butanol) (External Review Draft)

EPA Science Inventory

The IRIS Toxicological Review of tert-Butyl Alcohol (tert-Butanol) was released for external peer review in June 2017. EPA’s Science Advisory Board’s (SAB) Chemical Assessment Advisory Committee (CAAC) will conduct a peer review of the scientific basis supporting ...

IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) (External Review Draft)

EPA Science Inventory

The IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) was released for external peer review in June 2017. EPA’s Science Advisory Board’s (SAB) Chemical Assessment Advisory Committee (CAAC) will conduct a peer review of the scientific basis supporting the ETB...

IRIS Toxicological Review of Ethylene Glycol Mono Butyl Ether (Egbe) (Final Report)

EPA Science Inventory

EPA has finalized the Toxicological Review of Ethylene Glycol Mono Butyl Ether: in support of the Integrated Risk Information System (IRIS). Now final, this assessment may be used by EPA’s program and regional offices to inform decisions to protect human health.

Screening lactic acid bacteria strains with ability to bind di-n-butyl phthalate via Turbiscan technique.

PubMed

Lili, Zhao; Hongfei, Zhao; Shoukat, Sana; Xiaochen, Zhang; Bolin, Zhang

2017-06-01

Di-n-butyl phthalate (DBP) is a ubiquitous environmental contaminant that poses a risk to humans. Previous work indicates that the ability of lactic acid bacteria (LAB) to bind phthalic acid esters is strain-specific. As cell suspensions of LAB strains in aqueous solution are likely to be colloidal dispersions, this study provided a technique to efficiently screen LAB strains that bind DBP via Turbiscan, which has been widely used to measure the stability of emulsions or colloidal dispersions. Eleven LAB strains belonging to Lactobacillus plantarum, Lb. pentosus, Lb. paralimentarius, Lb. helveticus, Leuconostoc mesenteroides, Lb. acidophilus, Bifidobacterium lactis, and Bifidobacterium bifidum species were used in this study, and seven of them were selected to test in an earlier stage of exploring the process for finding a screening method; others were used for a validation test. It was observed that the various values of the 10 h Turbiscan Stability Index (TSI) of the cell suspension from each strain, at the equilibrium time of dispersed particles according to the peak thickness of cell-suspensions as measured by Turbiscan, had significant negative correlations with the DBP-binding percentage of LAB strains. Higher TSI values are correlated with lower binding of bacteria strains to DBP with a correlation coefficient of 0.8292. Cell surface hydrocarbons of LAB strains and their adherence were observed to correlate with DBP-binding percentages and may lead to the different states of aggregation or equilibrium of bacterial cell-suspensions, and the aggregation of bacterial cells resulted in fewer binding sites in the cell wall for DBP. Finally, four LAB strains were randomly selected to verify the feasibility of the method. In all, the findings demonstrate that TSI might be used as a tool to quickly screen strains that bind DBP. The present work could be extended to the removal of other toxic compounds, when screening of high-efficiency strains is required.

[Comparison of organic component and di-n-butyl phthalate between human milk and cow milk products].

PubMed

Liu, Hui-jie; Cao, Jia; Shu, Wei-qun

2011-01-01

To explore types of organic components and pollution level of di-n-butyl phthalate (DBP) between human milk and cow milk products. Forty healthy postpartum women with an average age of (27.44 ± 3.43) years old were selected, and a 5 ml sample of breast milk were collected. Four different brands of fresh cow milk and 1 brand of milk powder were randomly selected in the market. A total of 15 samples were collected with 3 from each brand, and the qualitative analysis of types of organic components and quantitative analysis of DBP were conducted by gas-chromatography and mass-spectrometry (GC/MS) method. A total of 176 different types of organic components were detected in 40 samples of human milk (averaged at (10.58 ± 4.16) types per sample); 37 different types were detected in 12 samples of fresh cow milk (averaged at (8.67 ± 1.61) types per sample); while 31 types of organic components were detected in 3 samples of milk powder (averaged at (12.67 ± 0.58) types per sample). It was obvious that the types of organic components in milk powder were significantly higher than the other two groups (t = 2.09, 4.00, P < 0.05). The most frequent organic component in human milk and cow milk was 9-octadecenoic acid (45.00% (18/40) in human milk; 53.33% (8/15) in cow milk). DBP concentrations were (57.78 ± 35.42) µg/L, (20.76 ± 6.60) µg/L and (0.45 ± 0.05) mg/kg (equal to (66.78 ± 7.60) µg/L) in human milk, fresh cow milk and milk powder, respectively. The DBP concentration in fresh cow milk was significantly lower than those in human milk and milk powder (t = 37.02, 46.02, P < 0.05). Both human milk and cow milk contain different types of organic pollutants, some of which have toxic effects on reproduction and human development.

Growth and antioxidant defense responses of wheat seedlings to di-n-butyl phthalate and di (2-ethylhexyl) phthalate stress.

PubMed

Gao, Minling; Dong, Youming; Zhang, Ze; Song, Wenhua; Qi, Yun

2017-04-01

Phthalate acid esters (PAEs) are vital environmental hormone-like chemicals that are noxious to plants, animals, and human beings. In this study, the influences of di-n-butyl phthalate (DBP) and di (2-ethylhexyl) phthalate (DEHP) on the seed germination, root morphology, and various physiological changes of wheat seedlings were investigated by analyzing superoxide anion (O 2 - ) accumulation, antioxidant enzyme activity, and lipid peroxidation. DBP and DEHP were found to obviously inhibit germination only at high concentrations, but significantly affected root morphology even at lower concentrations. Their toxic effects were the most severe on root elongation, followed by shoot elongation, and were the least severe on germination rate, indicating that root elongation was the best index for evaluating DBP and DEHP eco-toxicity. DBP and DEHP also enhanced O 2 - and malondialdehyde levels and membrane permeability, as well as produced changes in the antioxidant status and PAE content in the stem and leaf (combined tissues, hereafter shoot) and root tissues. The activities of superoxide dismutase, catalase, and peroxidase increased at low and medium DBP and DEHP concentrations, but declined at high PAE concentrations. These results indicated that PAEs could exert oxidative damage in the early development stage of wheat, particularly at higher concentrations. DBP and DEHP accumulation was higher in the roots than in the shoot tissues, and their levels in these tissues increased with increasing PAE concentrations, supporting their more-serious toxic effects on roots than those on shoots. Further, the physicochemical properties of DBP rendered it more harmful than DEHP. Copyright © 2017 Elsevier Ltd. All rights reserved.

BIODEGRADATION OF METHYL TERT-BUTYL ETHER USING AN INNOVATIVE BIOMASS CONCENTRATOR REACTOR

EPA Science Inventory

The aerobic biodegradation of methyl tert-butyl ether (MTBE) was investigated using a pilot-scale Biomass Concentrator Reactor (BCR). The reactor was operated for a year at a flow rate of 2500 L/d of Cincinnati dechlorinated tap water and an influent MTBE concentration o...

Aging of Weapon Seals – An Update on Butyl O-ring Issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, Mark H.

2011-07-13

During testing under the Enhanced Surveillance Campaign in 2001, preliminary data detected a previously unknown and potentially serious concern with recently procured butyl o-rings on several programs. All butyl o-rings molded from a proprietary formulation throughout the period circa 1999 through 2001 had less than a full cure. Engineering judgment was that under curing is detrimental and could possibly lead to sub-optimum performance or, in the worst case, premature seal failure. An aging study was undertaken to ensure that suspect o-rings installed in the stockpile will retain sufficient sealing force for a minimum ten-year service life. A new prediction modelmore » developed for this study indicates suspect o-rings do not need to be replaced before the ten-year service life. Long-term testing results are reported on a yearly basis to validate the prediction model. This report documents the aging results for the period September 2002 to January 2011.« less

Enhanced diisobutene production in the presence of methyl tertiary butyl ether

DOEpatents

Smith, Jr., Lawrence A.

1983-01-01

In the liquid phase reaction of isobutene in the presence of resin cation exchange resins with itself in a C.sub.4 hydrocarbon stream to form dimers, the formation of higher polymers, oligomers, and co-dimer by-products is suppressed by the presence of 0.0001 to 1 mole per mole of isobutene of methyl tertiary butyl ether.

New evidence for primordial action site of Fluazifop-P-butyl on Acanthospermum hispidum seedlings: From the effects on chlorophyll fluorescence characteristics and histological observation.

PubMed

Shang, Yuhong; Yang, Congjun; Liu, Zhihang; Song, Jiqing; Li, Pingliang; Li, Lingxu; Zhou, Fei; Xin, Hua; Wan, Fanghao; Matsumoto, Hiroshi; Luo, Xiaoyong

2017-10-01

Acanthospermum hispidum DC, an Asteraceae weed species, was very susceptible to fluazifop-P-butyl, but tolerant to other aryloxyphenoxypropionate herbicides, such as haloxyfop-P-methyl. However, other Asteraceae weeds including Bidens pilosa were all tolerant to fluazifop-P-butyl. Membrane lipid peroxidation by increasing the levels of reactive oxygen species (ROS) was proposed as an action mechanism of fluazifop-P-butyl in A. hispidum. To further clarify the primordial action site of fluazifop-P-butyl in this species, the effects on chlorophyll fluorescence characteristics and cytohistology of apical meristems were studied. Chlorophyll fluorescence characteristics (CFC) in sensitive A. hispidum seedlings were markedly affected by 10μM fluazifop-P-butyl, with the dark fluorescence yield (Fo), maximal fluorescence yield (Fm), maximal PS II quantum yield (Fv/Fm), effective photosystem II (PS II) quantum yield [Y(II)], and quantum yield of regulated energy dissipation [Y(NPQ)] declining, quantum yield of nonregulated energy dissipation [Y(NO)] rising, but these measures were not affected in Bidens pilosa. The effects of fluazifop-P-butyl on chlorophyll fluorescence properties were observed on the growing point before the mature leaves by about 4-6h. Haloxyfop-P-methyl, a control herbicide, had no effects on CFC of either A. hispidum or B. pilosa. In addition, damage to apical meristem cells of A. hispidum was observed at 6 HAT prior to changes in chlorophyll fluorescence parameters suggesting that the primary action site of fluazifop-P-butyl in this species is in the apical meristem and the effects on CFC may be the results of secondary action. Copyright © 2017 Elsevier Inc. All rights reserved.

Heat capacities of quasi-two-dimensional hetero-spin honeycomb magnets {NBu4[CuIICrIII(ox)3]}n and {PPh4[MnIICrIII(ox)3]}n (Bu=n-butyl, Ph=phenyl, H2ox=oxalic acid): High-temperature series expansion analysis

NASA Astrophysics Data System (ADS)

Hashiguchi, Takao; Miyazaki, Yuji; Asano, Kaori; Nakano, Motohiro; Sorai, Michio; Tamaki, Hiroko; Matsumoto, Naohide; Ōkawa, Hisashi

2003-10-01

Heat capacities of two metal-assembled complexes {NBu4[CuIICrIII(ox)3]}n and {PPh4[MnIICrIII(ox)3]}n (Bu=n-butyl, Ph=phenyl, H2ox=oxalic acid) were measured by adiabatic calorimetry in the 0.5-300 K temperature range. A ferromagnetic phase transition was detected at Tc=6.98 K for {NBu4[CuCr(ox)3]}n and Tc=5.59 K for {PPh4[MnCr(ox)3]}n, above which a remarkable heat capacity tail suggesting the short-range order effects was observed. Furthermore, a lambda-type heat-capacity anomaly due to a structural phase transition was found at Ttrs=226.9 K for {NBu4[CuCr(ox)3]}n and at Ttrs=71.3 K for {PPh4[MnCr(ox)3]}n. The observed entropy gains due to the magnetic phase transitions are very close to the theoretical values, R ln(2×4) for {NBu4[CuCr(ox)3]}n and R ln(6×4) for {PPh4[MnCr(ox)3]}n, expected from the spin multiplicities (CuII, s=1/2; MnII, s=5/2; CrIII, s=3/2). Since this series of metal oxalato assemblies can crystallize in either 2D honeycomb or 3D helical hetero-spin lattices, the theoretical magnetic heat capacities for both lattices were calculated by the high-temperature series expansion up to seventh cumulant to compare with their experimental magnetic heat capacities. The magnetic heat capacities above Tc were reproduced well by the theoretical ones for the 2D honeycomb lattice rather than the 3D helical lattice. The intralayer exchange interaction was estimated to be J/kB=5.0 K for {NBu4[CuCr(ox)3]}n and J/kB=0.95 K for {PPh4[MnCr(ox)3]}n. The analyses based on spin wave theory revealed that both compounds bring about dimensional crossovers into 3D ferromagnetic orders below Tc through the weak interlayer interactions.

BIODEGRADATION OF METHYL TERT-BUTYL ETHER AND BTEX AT VARYING HYDRAULIC RETENTION TIMES

EPA Science Inventory

The feasibility of biologically degrading methyl tert-butyl ether (MTBE) contaminated groundwater is dependent on the ability to degrade MTBE and its byproducts in the presence of other gasoline contaminants. This study investigates a mixed culture degrading both MTBE and benzene...

IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) (External Review Draft, 2009)

EPA Science Inventory

EPA is conducting a peer review and public comment of the scientific basis supporting the human health hazard and dose-response assessment of ethyl tertiary butyl ether (ETBE) that when finalized will appear on the Integrated Risk Information System (IRIS) database.

Combined prenatal and postnatal butyl paraben exposure produces autism-like symptoms in offspring: comparison with valproic acid autistic model.

PubMed

Ali, Elham H A; Elgoly, Amany H Mahmoud

2013-10-01

The aim of this work is to evaluate the impact of butyl paraben (BP) in brain of the pups developed for mothers administered BP from early pregnancy till weaning and its effect on studying the behavior, brain neurotransmitters and brain derived neurotrophic factor BDNF via comparing the results with valproic acid (VA) autistic-rat model preparing by a single oral injection dose of VA (800 mg/kg b.wt) at the 12.5 days of gestation. Butyl paraben was orally and subcutaneously administered (200 mg/kg b.wt) to pregnant rats from gestation day 1 to lactation day 21. The offspring male rats were subjected at the last 3 days of lactation to Morris water maze and three chamber sociability test then decapitated and the brain was excised and dissected to the cortex, hippocampus, cerebellum, midbrain and pons for the determination of norepinephrine, dopamine and serotonin (NE, DA and 5-HT) and cortex amino acids and whole brain BDNF. The results showed similar social and learning and memory behavioral deficits in VA rat model and the butyl paraben offspring in comparison with the controls. Also, some similar alterations were observed in monoamine content, amino acids and BDNF factor in the autistic-like model and butyl paraben offspring in comparison with the controls. The alterations were recorded notably in hippocampus and pons NE, midbrain DA, hippocampus and midbrain 5-HT, and frontal cortex GABA and asparagine. These data suggest that prenatal exposure to butyl paraben induced neuro-developmental disorders similar to some of the neurodevelopmental disorders observed in the VA model of autism. © 2013 Elsevier Inc. All rights reserved.

MEASUREMENT OF EXHALED BREATH AND VENOUS BLOOD TO DEVELOP A PHYSIOLOGICALLY BASED PHARMACOKINETIC MODEL FOR HUMAN EXPOSURE TO METHYL TERTIARY-BUTYL ETHER AND THE PRODUCTION OF THE BIOMARKER TERTIARY-BUTYL ALCOHOL

EPA Science Inventory

Methyl tertiary-butyl ether (MTBE) is a common fuel additive used to increase the availability of oxygen in gasoline to reduce winter-time carbon monoxide emissions from automobiles. Also, MTBE boosts gasoline "octane" rating and, as such, allows reduction of benzene...

Electrical properties of binary mixtures of amino silicone oil and methyl iso butyl ketone

NASA Astrophysics Data System (ADS)

Shah, K. N.; Rana, V. A.; Vankar, H. P.

2018-05-01

The real and imaginary parts of the dielectric function of the binary mixtures of the methyl iso butyl ketone and amino silicone oil in the frequency range 100 Hz to 2 MHz were measured using precision LCR meter at 305.15 K. The electrical properties such as electrical modulus M*(ω), electrical conductivity σ*(ω) and complex impedance Z*(ω) were calculated using the dielectric function ɛ*(ω). The ionic polarization relaxation time (Τσ) and D.C. conductivity (σdc) were also calculated using electrical properties. The ionic behavior of methyl iso butyl ketone and non-ionic behavior of amino silicone oil are also explained. The electrical parameters are used to gain information about the effect of concentration variation of components of the mixtures on the electrical properties.

Thin PDMS Films Using Long Spin Times or Tert-Butyl Alcohol as a Solvent

PubMed Central

Koschwanez, John H.; Carlson, Robert H.; Meldrum, Deirdre R.

2009-01-01

Thin polydimethylsiloxane (PDMS) films are frequently used in “lab on a chip” devices as flexible membranes. The common solvent used to dilute the PDMS for thin films is hexane, but hexane can swell the underlying PDMS substrate. A better solvent would be one that dissolves uncured PDMS but doesn't swell the underlying substrate. Here, we present protocols and spin curves for two alternatives to hexane dilution: longer spin times and dilution in tert-butyl alcohol. The thickness of the PDMS membranes under different spin speeds, spin times, and PDMS concentrations was measured using an optical profilometer. The use of tert-butyl alcohol to spin thin PDMS films does not swell the underlying PDMS substrate, and we have used these films to construct multilayer PDMS devices. PMID:19238212

IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) (Interagency Science Consultation Draft)

EPA Science Inventory

In September 2016, EPA released the draft IRIS Toxicological Review of Ethyl Tertiary Butyl Ether (ETBE) for public comment and discussion. The draft assessment was reviewed internally by EPA and by other federal agencies and White House Offices before public release. Consistent ...

Vibrational and reorientationl relaxation in liquid tert-butyl bromide and tert-butyl bromide- d9

NASA Astrophysics Data System (ADS)

Szostak, R.; Hawranek, J. P.

1992-12-01

The vibrational and reorientational correlation functions of the ν s(CBr) mode in liquid tert-butyl bromide (TBBr) and in its deuterated analogue (TBBr- d9) were determined from Raman bandshapes. The Kubo product δτ m obtained by fitting the Rothschild equation to experimental data amounts to 0.36-0.45 for the studied bands, which indicates a fairly fast modulation regime in these systems. The approximation of experimental rotational correlation functions with the help of the J-diffusion model yields values of 0.11-0.12ps for the angular momentum correlation time. The second-order rotational correlation times (1.7-2.0ps) agree well with the NMR results of D.W. Aksnes, K. Ramstad and O.P. Björlykke, Magn. Reson. Chem., 25 (1987) 1063. Selected bandshape parameters for δ(CCC) in both compounds, ϱ(CH 3) in TBBr and ν s(CC) in TBBR- d9 were also quoted.

Enhanced diisobutene production in the presence of methyl tertiary butyl ether

DOEpatents

Smith, L.A. Jr.

1983-03-01

In the liquid phase reaction of isobutene in the presence of resin cation exchange resins with itself in a C[sub 4] hydrocarbon stream to form dimers, the formation of higher polymers, oligomers, and co-dimer by-products is suppressed by the presence of 0.0001 to 1 mole per mole of isobutene of methyl tertiary butyl ether. 1 fig.

Correlation of the rates of solvolysis of tert-butyl chlorothioformate and observations concerning the reaction mechanism

PubMed Central

Kyong, Jin Burm; Lee, Yelin; D’Souza, Malcolm John; Kevill, Dennis Neil; Kevill, Dennis Neil

2012-01-01

The “parent” tertiary alkyl chloroformate, tert-butyl chloroformate, is unstable, but the tert-butyl chlorothioformate (1) is of increased stability and a kinetic investigation of the solvolyses is presented. Analyses in terms of the simple and extended Grunwald-Winstein equations are carried out. The original one-term equation satisfactorily correlates the data with a sensitivity towards changes in solvent ionizing power of 0.73 ±0.03. When the two-term equation is applied, the sensitivity towards changes in solvent nucleophilicity of 0.13 ± 0.09 is associated with a high (0.17) probability that the term that it governs is not statistically significant. PMID:23538747

Physical Properties and Biological Activity of Poly(butyl acrylate–styrene) Nanoparticle Emulsions Prepared with Conventional and Polymerizable Surfactants

PubMed Central

Garay-Jimenez, Julio C.; Gergeres, Danielle; Young, Ashley; Dickey, Sonja; Lim, Daniel V.; Turos, Edward

2009-01-01

Recent efforts in our laboratory have explored the use of polyacrylate nanoparticles in aqueous media as stable emulsions for potential applications in treating drug-resistant bacterial infections. These emulsions are made by emulsion polymerization of acrylated antibiotic compounds in a mixture of butyl acrylate and styrene (7:3 w:w) using sodium dodecyl sulfate (SDS) as a surfactant. Prior work in our group established that the emulsions required purification to remove toxicity associated with extraneous surfactant present in the media. This paper summarizes our investigations of poly(butyl acrylate-styrene) emulsions made using anionic, cationic, zwitterionic, and non-charged (amphiphilic) surfactants, as well as attachable surfactant monomers (surfmers), comparing the cytotoxicity and microbiological activity levels of the emulsion both before and after purification. Our results show that the attachment of a polymerizable surfmer onto the matrix of the nanoparticle neither improves nor diminishes cytotoxic or antibacterial effects of the emulsion, regardless of whether the emulsions are purified or not, and that the optimal properties are associated with the use of the non-ionic surfactants versus those carrying anionic, cationic, or zwitterionic charge. Incorporation of an N-thiolated β-lactam antibacterial agent onto the nanoparticle matrix via covalent attachment endows the emulsion with antibiotic properties against pathogenic bacteria such as methicillin-resistant Staphylococcus aureus (MRSA), without changing the physical properties of the nanoparticles or their emulsions. PMID:19523413

IRIS Toxicological Review of Tert-Butyl Alcohol (Tert-Butanol) (Interagency Science Consultation Draft)

EPA Science Inventory

On April 29, 2016, the Toxicological Review of tert-Butyl Alcohol (tert-Butanol) (Public Comment Draft) was released for public comment. The draft Toxicological Review and charge were reviewed internally by EPA and by other federal agencies and the Executive Office ...

An Evaluation of the Human Carcinogenic Potential of Ethylene Glycol Butyl Ether (Egbe)

EPA Science Inventory

This position paper, An Evaluation of the Human Carcinogenic Potential of Ethylene Glycol Butyl Ether, was developed in support of the EPA's evaluation of a petition from the American Chemistry Council requesting to delist EGBE per the Clean Air Act Amendments (CAAA), Titl...

Cyanoacrylate closure of incompetent great, small and accessory saphenous veins without the use of post-procedure compression: Initial outcomes of a post-market evaluation of the VenaSeal System (the WAVES Study).

PubMed

Gibson, Kathleen; Ferris, Brian

2017-04-01

Purpose Cyanoacrylate closure of the great saphenous vein with the VenaSeal™ Closure System is a relatively new modality. Studies have been limited to moderate-sized great saphenous veins and some have mandated postoperative compression stockings. We report the results of a prospective study of cyanoacrylate closure for the treatment of great saphenous vein, small saphenous veins, and/or accessory saphenous veins up to 20 mm in diameter. Methods Fifty subjects with symptomatic great saphenous vein, small saphenous veins, and/or accessory saphenous veins incompetence were each treated at a single session. Compression stockings were not used post-procedure. Subjects returned to clinic at week 1 and again at one month. Post-procedure evaluations were performed at seven days and one month and included numerical pain rating score, revised venous clinical severity score, the Aberdeen Varicose Vein Questionnaire score, and time to return to work and normal activities. Duplex ultrasound was performed at each visit. Findings Procedural pain was mild (numerical pain rating scale 2.2 ± 1.8). All treated veins (48 great saphenous vein, 14 accessory saphenous veins, and 8 small saphenous veins) had complete closure by duplex ultrasound at seven days and one month. Mean time to return to work and normal activities was 0.2 ± 1.1 and 2.4 ± 4.1 days, respectively. The revised venous clinical severity score was improved to 1.8 ± 1.4 ( p < .001) and Aberdeen Varicose Vein Questionnaire score to 8.9 ± 6.6 ( p < .001) at one month. Phlebitis in the treatment area or side branches occurred in 10 subjects (20%) and completely resolved in all but one subject (2%) by one month; 98% of subjects were "completely" or "somewhat" satisfied, and 2% "unsatisfied" with the procedure at one month, despite the protocol disallowance of concomitant side branch treatment. Conclusions Cyanoacrylate closure is safe and effective for the treatment of one or more

Distribution of methyl tert-butyl ether (MTBE) and selected water-quality constituents in the surficial aquifer at the Dover National Test Site, Dover Air Force Base, Delaware, 2001

USGS Publications Warehouse

Stewart, Marie; Guertal, William R.; Barbaro, Jeffrey R.; McHale, Timothy J.

2004-01-01

A joint study by the Dover National Test Site, Dover Air Force Base, Delaware, and the U.S. Geological Survey was conducted from June 27 through July 18, 2001, to determine the spatial distribution of the gasoline oxygenate additive methyl tert-butyl ether and selected water-quality constituents in the surficial aquifer underlying the Dover National Test Site. This report provides a summary assessment of the distribution of methyl tert-butyl ether and a preliminary screening of selected constituents that may affect natural attenuation and remediation demonstrations at the Dover National Test Site. The information gathered during this study is designed to assist potential remedial investigators who are considering conducting a methyl tert-butyl ether remedial demonstration at the test site. In addition, the study supported a planned enhanced bioremediation demonstration and assisted the Dover National Test Site in identifying possible locations for future methyl tert-butyl ether remediation demonstrations. A direct-push drill rig was used to collect a total of 147 ground-water samples (115 VOC samples and 32 quality-assurance samples) at varying depths. Volatile organic compounds were above the method reporting limits in 59 of the 115 ground-water samples. The concentrations ranged from below detection limits to maximum values of 12.4 micrograms per liter of cis-1,2-dichloro-ethene, 1.14 micrograms per liter of trichloro-ethene, 2.65 micrograms per liter of tetrachloro-ethene, 1,070 micrograms per liter of methyl tert-butyl ether, 4.36 micrograms per liter of benzene, and 1.8 micrograms per liter of toluene. Vinyl chloride, ethylbenzene, p,m-xylene, and o-xylene were not detected in any of the samples collected during this investigation. Methyl tert-butyl ether was detected in 47 of the 115 ground-water samples. The highest concentrations of methyl tert-butyl ether were detected in the surficial aquifer from ?4.6 to 6.4 feet mean sea level; however, methyl tert-butyl

Hydrolysis of the quinone methide of butylated hydroxytoluene in aqueous solutions.

PubMed

Willcockson, Maren Gulsrud; Toteva, Maria M; Stella, Valentino J

2013-10-01

Butylated hydroxytoluene or BHT is an antioxidant commonly used in pharmaceutical formulations. BHT upon oxidation forms a quinone methide (QM). QM is a highly reactive electrophilic species that can undergo nucleophilic addition. Here, the kinetic reactivity of QM with water at various apparent pH values in a 50% (v/v) water-acetonitrile solution at constant ionic strength of I = 0.5 (NaCl)4 , was studied. The hydrolysis of QM in the presence of added acid, base, sodium chloride, and phosphate buffer resulted in the formation of only one product--the corresponding 3,5-di-tert-butyl-4-hydroxybenzyl alcohol (BA). The rate of BA formation was catalyzed by the addition of acid and base, but not chloride and phosphate species. Nucleophilic excipients, used in the pharmaceutical formulation, or nucleophilic groups on active pharmaceutical ingredient molecule may form adducts with QM, the immediate oxidative product of BHT degradation, thus having implications for drug product impurity profiles. Because of these considerations, BHT should be used with caution in formulations containing drugs or excipients capable of acting as nucleophiles. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Synthesis of t-Butyl (2R)-Hydroxyisovalerate, A Precursor of Aureobasidin B

NASA Astrophysics Data System (ADS)

Maharani, R.; Puspitasari, D.; Taufiqqurahman; Huspa, D. H. P.; Hidayat, A. T.; Sumiarsa, D.; Hidayat, I. W.

2017-02-01

Aureobasidins are a family of cyclodepsipeptides have antifungal properties. They were isolated from the black yeast Aureobasidium pullulans R106 and over 30 derivatives have been successfully characterized. There are few publications reporting the total synthesis of aureobasidins. The limited reports of the synthesis of the aureobasidin derivatives are due to the difficult access to the preparations of precursors. The aim of this research is to synthesise a precursor of aureobasidin B, t-butyl (2R)-hydroxyisovalerate (t-Bu-Hiv), that is prepared for the total synthesis of aureobasidin B. The synthesis of AbB is planned to be undertaken by using a solid phase method, so the ester formation between t-Bu-Hiv and the Fmoc-β-hydroxymethylvaline will be carried out in solution phase to form depsidipeptide. The t-butyl group was used as protecting agent that is due to the straightforward elimination of the protecting group from the Fmoc-depsidipeptide. The t-Bu-Hiv acid was prepared from D-valine through diazotisation to form (2R)-acetyloxyisovaleric acid in 62.7% yield. Product of the first step was then protected by t-butyl group by using Boc-anhydride in t-butanol to give t-butil (2R)-acetyloxyisovalerate in 44% yield. In the last step, the acetyloxy group was eliminated by using potassium carbonate in methanol/water to give the desired product, t-Bu-Hiv in 33.5% yield. The t-Bu-Hiv is ready to be combined with Fmoc-β-hydroxymethylvaline to result in depsidipeptide that will be attached to the resin in the total synthesis of AbB. Each stage of this synthesis was controlled by thin layer chromatography and all products were purified by open column chromatography. All the synthesized products were characterized by various spectroscopic techniques, including infrared spectrophotometer, mass spectroscopy (ESI-MS), 1H-NMR and 13C-NMR.

[Photometric determination of butyl "aeroflot" flotation agent (sodium dibutyl dithiophosphate) in the air of work zone and skin washings].

PubMed

Dorogova, V B; Kucheriavykh, E I; Sokolova, T V

1989-01-01

Photometric procedure of butyl "aeroflot" identification in the work zone air and in wash-out from workers' integument was developed, The procedure was based on the formation of yellow- and orange-dyed copper dibutyl dithiophosphate under butyl "aeroflot" interaction with copper sulphate with the subsequent photometry of dyed solutions for the wavelength of 420 nm in the 10-mm cell. Buffer solution with pH-9.2 was used as an absorbing solution for the workplace air sampling and integument wash-out.

Characterization of cellulose II nanoparticles regenerated from ionic liquid, 1-butyl-3-methylimidazolium chloride

USDA-ARS?s Scientific Manuscript database

Regenerated cellulose nanoparticles (RCNs) including both elongated fiber and spherical structures were prepared from microcrystalline cellulose (MCC)and cotton using 1-butyl-3-methylimidazolium chloride followed by high-pressure homogenization. The crystalline structure of RCNs was cellulose II in ...

Discovery, Synthesis, And Structure-Based Optimization of a Series of N-(tert-Butyl)-2-(N-arylamido)-2-(pyridin-3-yl) Acetamides (ML188) as Potent Noncovalent Small Molecule Inhibitors of the Severe Acute Respiratory Syndrome Coronavirus (SARS-CoV) 3CL Protease

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobs, Jon; Grum-Tokars, Valerie; Zhou, Ya

A high-throughput screen of the NIH molecular libraries sample collection and subsequent optimization of a lead dipeptide-like series of severe acute respiratory syndrome (SARS) main protease (3CLpro) inhibitors led to the identification of probe compound ML188 (16-(R), (R)-N-(4-(tert-butyl)phenyl)-N-(2-(tert-butylamino)-2-oxo-1-(pyridin-3-yl)ethyl)furan-2-carboxamide, Pubchem CID: 46897844). But, unlike the majority of reported coronavirus 3CLpro inhibitors that act via covalent modification of the enzyme, 16-(R) is a noncovalent SARS-CoV 3CLpro inhibitor with moderate MW and good enzyme and antiviral inhibitory activity. A multicomponent Ugi reaction was utilized to rapidly explore structure–activity relationships within S1', S1, and S2enzyme binding pockets. Moreover, the X-ray structure of SARS-CoV 3CLpromore » bound with 16-(R) was instrumental in guiding subsequent rounds of chemistry optimization. 16-(R) provides an excellent starting point for the further design and refinement of 3CLpro inhibitors that act by a noncovalent mechanism of action.« less

Endovascular Management of Ruptured Pancreaticoduodenal Artery Aneurysms Associated with Celiac Axis Stenosis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suzuki, Kojiro, E-mail: Kojiro@med.nagoya-u.ac.jp; Tachi, Yasushi; Ito, Shinji

2008-11-15

The purpose of this study was to assess the efficacy of transcatheter arterial embolization for ruptured pancreaticoduodenal artery (PDA) aneurysms associated with celiac axis stenosis (CS). Seven patients (four men and three women; mean age, 64; range, 43-84) were treated with transcatheter arterial embolization between 2002 and 2007. They were analyzed with regard to the clinical presentation, radiological finding, procedure, and outcome. All patients presented with sudden epigastric pain or abdominal discomfort. Contrast-enhanced CT showed a small aneurysm and retroperitoneal hematoma around the pancreatic head in all patients. The aneurysms ranged from 0.3 to 0.9 cm in size. In onemore » patient, two aneurysms were detected. The aneurysms were located in the pancreaticoduodenal artery (n = 5) and the dorsal pancreatic artery (n = 3). Embolization was performed with microcoils in all aneurysms (n = 8). N-Butyl 2-cyanoacrylate (n = 1) and gelatine particle (n = 1) were also used. Complete occlusion was achieved in four patients. In the other three patients, a significantly reduced flow to the aneurysm remained at final angiography. However, these aneurysms were thrombosed on follow-up CT within 2 weeks. And there was no recurrence of the symptoms and bleeding during follow-up (mean, 28 months; range, 5-65 months) in all patients. In conclusion, transcatheter arterial embolization for PDA aneurysms associated with CS is effective. Significant reduction of the flow to the aneurysm at final angiography may be predictive of future thrombosis.« less

DERMAL, ORAL, AND INHALATION PHARMACOKINETICS OF METHYL TERTIARY BUTYL ETHER (MTBE) IN HUMAN VOLUNTEERS

EPA Science Inventory

Methyl tertiary butyl ether (MTBE), a gasoline additive, used to increase octane and reduce carbon monoxide emissions and ozone precursors has contaminated drinking water leading to exposure by oral, inhalation, and dermal routes. To determine its dermal, oral, and inhalation ki...

ATTENUATION OF METHYL TERT-BUTYL ETHER IN WATER USING SUNLIGHT AND A PHOTOCATALYST

EPA Science Inventory

The use of methyl tert-butyl ether (MTBE) as a gasoline additive has resulted in increasing pollution of ground water. Most of the conventional treatment technologies are inefficient or costly when the initial concentration of MTBE is low (<200 ug/L). In order to find an eco-frie...

OCCURRENCE OF METYL TERT-BUTYL ETHER (MTBE) AT FIVE MARINAS IN LAKE TEXOMA

EPA Science Inventory

Occurrence of methyl tert-butyl ether (MTBE) in five marinas was monitored between June 1999 and November 2000 in Lake Texoma located on the border of Oklahoma and Texas. MTBE is a commonly used gasoline additive and a suspected carcinogen. Lake water was collected at loc...

Vapor intrusion risk of fuel ether oxygenates methyl tert-butyl ether (MTBE), tert-amyl methyl ether (TAME) and ethyl tert-butyl ether (ETBE): A modeling study.

PubMed

Ma, Jie; Xiong, Desen; Li, Haiyan; Ding, Yi; Xia, Xiangcheng; Yang, Yongqi

2017-06-15

Vapor intrusion of synthetic fuel additives represents a critical yet still neglected problem at sites contaminated by petroleum fuel releases. This study used an advanced numerical model to investigate the vapor intrusion potential of fuel ether oxygenates methyl tert-butyl ether (MTBE), tert-amyl methyl ether (TAME), and ethyl tert-butyl ether (ETBE). Simulated indoor air concentration of these compounds can exceed USEPA indoor air screening level for MTBE (110μg/m 3 ). Our results also reveal that MTBE has much higher chance to cause vapor intrusion problems than TAME and ETBE. This study supports the statements made by USEPA in the Petroleum Vapor Intrusion (PVI) Guidance that the vertical screening criteria for petroleum hydrocarbons may not provide sufficient protectiveness for fuel additives, and ether oxygenates in particular. In addition to adverse impacts on human health, ether oxygenate vapor intrusion may also cause aesthetic problems (i.e., odour and flavour). Overall, this study points out that ether oxygenates can cause vapor intrusion problems. We recommend that USEPA consider including the field measurement data of synthetic fuel additives in the existing PVI database and possibly revising the PVI Guidance as necessary. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparison of sodium naphthenate and air-ionization corona discharge as surface treatments for the ethylene-tetrafluoroethylene polymer (ETFE) to improve adhesion between ETFE and acrylonitrile-butadiene-styrene polymer (ABS) in the presence of a cyanoacrylate adhesive (CAA)

NASA Astrophysics Data System (ADS)

Lucía Johanning-Solís, Ana; Stradi-Granados, Benito A.

2014-09-01

This study compares two ethylene-tetrafluoroethylene (ETFE) surface activation treatments, namely chemical attack with a solution of sodium naphthenate and plasma erosion via air-ionization corona discharge in order to improve the adhesive properties of the ETFE. An experimental design was prepared for both treatments in order to assess the effect of the treatment characteristics on the tensile load needed to break the bond between the ETFE and the acrylonitrile-butadiene-styrene polymer (ABS) formed with a cyanoacrylate adhesive (CAA) applied between them. The reason for the selection of this problem is that both polymers are frequently used in the biomedical industry for their properties, and they need to be joined firmly in biomedical devices, and the cyanoacrylate adhesive is the adhesive traditionally used for fluoropolymers, in this case the ETFE, and the same CAA has also shown good adhesion with ABS. However, the strength of the bond for the triplet ETFE-CAA-ABS has not been reported and the improvement of the strength of the bond with surface treatments is not found in scholarly journals for modern medical devices such as stents and snares. Both treatments were compared based on the aforementioned design of experiments. The case where ETFE receives no surface treatment serves as the reference. The results indicated that the three factors evaluated (initial drying of the material, temperature of the chemical bath, and immersion time), and their interactions have no significant effect over the tensile load at failure (tensile strength) of the adhesive bond being evaluated. For the air-ionization corona discharge treatment, two factors were evaluated: discharge exposition time and air pressure. The results obtained from this experimental design indicate that there is no significant difference between the levels of the factors evaluated. These results were unexpected as the ranges used were representative of the maximum ranges permissible in manufacturing

Electrical conduction hysteresis in carbon black-filled butyl rubber compounds

NASA Astrophysics Data System (ADS)

Alzamil, M. A.; Alfaramawi, K.; Abboudy, S.; Abulnasr, L.

2018-04-01

Temperature and concentration dependence of electrical resistance of butyl rubber filled with GPF carbon black was carried out. Current-voltage (I-V) characteristics at room-temperature were also investigated. The I-V characteristics show that the behavior is linear at small voltages up to approximately 0.15 V and currents up to 0.05 mA indicating that the conduction mechanism was probably due to electron tunneling from the end of conductive path to the other one under the action of the applied electric field. At higher voltages, a nonlinear behavior was noticed. The nonlinearity was attributed to the joule heating effects. Electrical resistance of the butyl/GPF composites was measured as a function of temperature during heating and cooling cycles from 300 K and upward to a specific temperature. When the specimens were heated up, the resistance was observed to increase continuously with the rise of temperature. However, when the samples were cooled down, the resistance was observed to decrease following a different path. The presence of conduction hysteresis behavior in the resistance-temperature curves during the heating and cooling cycles was then verified. The electrical conduction of the composite system is supposed to follow an activation conduction mechanism. Activation energy was calculated at different filler concentrations for both the heating and cooling processes.

Biomechanical and histologic evaluation of two application forms of surgical glue for mesh fixation to the abdominal wall.

PubMed

Ortillés, Á; Pascual, G; Peña, E; Rodríguez, M; Pérez-Köhler, B; Mesa-Ciller, C; Calvo, B; Bellón, J M

2017-11-01

The use of an adhesive for mesh fixation in hernia repair reduces chronic pain and minimizes tissue damage in the patient. This study was designed to assess the adhesive properties of a medium-chain (n-butyl) cyanoacrylate glue applied as drops or as a spray in a biomechanical and histologic study. Both forms of glue application were compared to the use of simple-loose or continuous-running polypropylene sutures for mesh fixation. Eighteen adult New Zealand White rabbits were used. For mechanical tests in an ex vivo and in vivo study, patches of polypropylene mesh were fixed to an excised fragment of healthy abdominal tissue or used to repair a partial abdominal wall defect in the rabbit respectively. Depending on the fixation method used, four groups of 12 implants each or 10 implants each respectively for the ex vivo and in vivo studies were established: Glue-Drops, Glue-Spray, Suture-Simple and Suture-Continuous. Biomechanical resistance in the ex vivo implants was tested five minutes after mesh fixation. In vivo implants for biomechanical and histologic assessment were collected at 14 days postimplant. In the ex vivo study, the continuous suture implants showed the highest failure sample tension, while the implants fixed with glue showed lower failure sample tension values. However, the simple and continuous suture implants returned the highest stretch values. In the in vivo implants, failure sample tension values were similar among groups while the implants fixed with a continuous running suture had the higher stretch values, and the glue-fixed implants the lower stretch values. All meshes showed good tissue integration within the host tissue regardless of the fixation method used. Our histologic study revealed the generation of a denser, more mature repair tissue when the cyanoacrylate glue was applied as a spray rather than as drops. Copyright © 2017 Elsevier Ltd. All rights reserved.

Identification of Binding Modes for Amino Naphthalene 2-Cyanoacrylate (ANCA) Probes to Amyloid Fibrils from Molecular Dynamics Simulations.

PubMed

He, Huan; Xu, Juan; Cheng, Dan-Yang; Fu, Li; Ge, Yu-Shu; Jiang, Feng-Lei; Liu, Yi

2017-02-16

The amino naphthalene 2-cyanoacrylate (ANCA) probe is a kind of fluorescent amyloid binding probe that can report different fluorescence emissions when bound to various amyloid deposits in tissue, while their interactions with amyloid fibrils remain unclear due to the insoluble nature of amyloid fibrils. Here, all-atom molecular dynamics simulations were used to investigate the interaction between ANCA probes with three different amyloid fibrils. Two common binding modes of ANCA probes on Aβ40 amyloid fibrils were identified by cluster analysis of multiple simulations. The van der Waals and electrostatic interactions were found to be major driving forces for the binding. Atomic contacts analysis and binding free energy decomposition results suggested that the hydrophobic part of ANCA mainly interacts with aromatic side chains on the fibril surface and the hydrophilic part mainly interacts with positive charged residues in the β-sheet region. By comparing the binding modes with different fibrils, we can find that ANCA adopts different conformations while interacting with residues of different hydrophobicity, aromaticity, and electrochemical properties in the β-sheet region, which accounts for its selective mechanism toward different amyloid fibrils.

Use of 2-octyl cyanoacrylate for wound closure in a modified Roberts-Bistner procedure for eyelid agenesis in five cats (nine eyes).

PubMed

Reed, Zoe; Doering, Clinton J; Barrett, Paul M

2018-01-15

CASE DESCRIPTION 5 cats (9 eyes) were evaluated for surgical correction of bilateral eyelid agenesis. CLINICAL FINDINGS All eyes lacked > 25% of the temporal upper eyelid, and all cats had clinical signs attributable to chronic ocular exposure. Abnormalities were limited to the ocular surface in the 4 female cats, whereas the sole male cat had additional abnormalities consistent with anterior segment dysgenesis. TREATMENT AND OUTCOME A modified Roberts-Bistner procedure involving 2-octyl cyanoacrylate (2OCA) was performed on 9 eyes; 1 eye was enucleated. Surgical wounds in the initial 3 eyes were closed with 2OCA plus sutures, and flaps were lined with conjunctiva. The technique was optimized for remaining eyes by use of a single suture for flap apposition, no conjunctival lining of flaps, and 2OCA alone for wound closure. Median duration of surgery was 35 minutes/eye for the initial 3 eyes versus 16 minutes/eye for the subsequent 6 eyes treated with the optimized procedure. After surgery, all cats had complete palpebral reflexes and resolution of clinical signs of ocular irritation. Minor complications in the early postoperative period included eyelid swelling (n = 9), poor cosmesis (7), and persistent epiphora (3). By the second recheck examination, swelling had resolved and cosmesis was considered excellent. Two eyes with epiphora had been treated with the initial modified procedure and required cryoepilation for resolution of epiphora. CLINICAL RELEVANCE The modified Roberts-Bistner procedure for eyelid agenesis involving 2OCA for wound closure provided functional, cosmetic eyelids that improved comfort and provided protection of the ocular surface in affected cats.

DERMAL, ORAL AND INHALATION PHARMACOKINETICS OF METHYL TERTIARY-BUTYL ETHER (MTBE) IN HUMAN VOLUNTEERS

EPA Science Inventory

Methyl tertiary butyl ether (MTBE), a gasoline additive used to increase octane and reduce carbon monoxide emissions and ozone precursors, has contaminated drinking water and can lead to exposure by oral, inhalation, and dermal routes. To determine its dermal, oral, and inhal...

IRIS Toxicological Review of Ethylene Glycol Mono-Butyl Ether (Egbe) (Interagency Science Discussion Draft)

EPA Science Inventory

EPA released the draft report, Toxicological Review for Ethylene Glycol Mono-Butyl Ether , that was distributed to Federal agencies and White House Offices for comment during the Science Discussion step of the IRIS Assessment Development Process. Comments received from ot...

Volumetric Properties of the Ionic Liquid, 1-Butyl-3-methylimidazolium Tetrafluoroborate, in Organic Solvents at T = 298.15K

NASA Astrophysics Data System (ADS)

Shekaari, Hemayat; Zafarani-Moattar, Mohammed Taghi

2008-04-01

Apparent molar volumes, V_φ , and compressibilities, kappa _φ , of 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF4]) have been determined from precise density and speed-of-sound measurements in organic solvents, methanol (MeOH), acetonitrile (MeCN), tetrahydrofuran (THF), N, N-dimethylacetamide (DMA), and dimethylsulfoxide (DMSO) in the dilute region of the ionic liquid. Corresponding values at infinite dilution are estimated by the Redlich-Mayer and Pitzer equations. The results have been interpreted by the interaction of the [BMIm][BF4] in the organic solvents. Results show that the structure and dielectric constant of the organic solvents play an important role for the ion-solvent interactions in these mixtures. It was found that the strength of interaction between [BMIm][BF4] with the studied organic solvents has the order DMSO > DMA > MeOH > MeCN > THF.

Charge-Transfer Complexes and Photochemistry of Ozone with Ferrocene and n-Butylferrocene: A UV-vis Matrix-Isolation Study.

PubMed

Pinelo, Laura F; Kugel, Roger W; Ault, Bruce S

2015-10-15

The reactions of ozone with ferrocene (cp2Fe) and with n-butylferrocene (n-butyl cp2Fe) were studied using matrix isolation, UV-vis spectroscopy, and theoretical calculations. The codeposition of cp2Fe with O3 and of n-butyl cp2Fe with O3 into an argon matrix led to the production of 1:1 charge-transfer complexes with absorptions at 765 and 815 nm, respectively. These absorptions contribute to the green matrix color observed upon initial deposition. The charge-transfer complexes underwent photochemical reactions upon irradiation with red light (λ ≥ 600 nm). Theoretical UV-vis spectra of the charge-transfer complexes and photochemical products were calculated using TD-DFT at the B3LYP/6-311G++(d,2p) level of theory. The calculated UV-vis spectra were in good agreement with the experimental results. MO analysis of these long-wavelength transitions showed them to be n→ π* on the ozone subunit in the complex and indicated that the formation of the charge-transfer complex between ozone and cp2Fe or n-butyl cp2Fe affects how readily the π* orbital on O3 is populated when red light (λ ≥ 600 nm) is absorbed. 1:1 complexes of cp2Fe and n-butyl cp2Fe with O2 were also observed experimentally and calculated theoretically. These results support and enhance previous infrared studies of the mechanism of photooxidation of ferrocene by ozone, a reaction that has considerable significance for the formation of iron oxide thin films for a range of applications.

Sequestering ability of butylated hydroxytoluene, propyl gallate, resveratrol, and vitamins C and E against ABTS, DPPH, and hydroxyl free radicals in chemical and biological systems.

PubMed

Soares, Daniele G; Andreazza, Ana C; Salvador, Mirian

2003-02-12

The antioxidant capacity of butylated hydroxytoluene (BHT; 2,6-di-tert-butyl-p-cresol), propyl gallate (3,4,5-trihydroxybenzoic acid n-propyl ester), resveratrol (trans-3,4',5-trihydroxystilbene), and vitamins C (l-ascorbic acid) and E [(+)-alpha-tocopherol] was studied in chemical and biological systems. The chemical assays evaluated the capacity of these antioxidants to sequester 2,2'-azinobis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS.) and 1,1 diphenyl-2-picrylhydrazyl (DPPH.). A new colorimetric method to determine hydroxyl radical scavenging is also described. The biological tests use the eucaryotic cells of Saccharomyces cerevisiae treated with the antioxidants in the presence of the stressing agents apomorphine, hydrogen peroxide, and paraquat dichloride (methylviologen; 1,1'-dimethyl-4,4'-bipyridinium dichloride). The results in chemical systems showed that all of the antioxidants were able to significantly inhibit the oxidation of beta-carotene by hydroxyl free radicals. The assays in yeast showed that the antioxidant activity of the tested compounds depended on the stressing agent used and the mechanism of action of the antioxidant.

Equilibrium Polymerization of Butyl Methacrylate in Bulk and in Nanopore Confinement

NASA Astrophysics Data System (ADS)

Tian, Qian; Simon, Sindee

The equilibrium between monomer and polymer in free radical polymerization can be shifted towards monomer under nanoconfinement. This decrease in ceiling temperature is due to a decrease in the entropy associated with the constrained polymer chains, resulting in a larger negative change in entropy of reaction. Here, we investigate the equilibrium polymerization of butyl methacrylate (BMA) in bulk and in nanopore confinement with differential scanning calorimetry (DSC) using di-tert-butyl peroxide (DTBP) as initiator. This system has several advantages compare to the previously studied system of methyl methacrylate (MMA) initiated with 2,2'-azo-bis-isobutyronitrile (AIBN), namely, a reduced rate of reaction, higher boiling point of monomer, and higher initiator utilization temperature range, all of which facilitate the study of the reaction at high temperatures near the ceiling temperature. Interestingly, for BMA, there is no change in limiting conversion between material reacted in bulk and that in controlled pore glass having pore diameters of 7.5 and 50 nm. This unexpected result may be due to the greater flexibility of the PBMA chains compared to PMMA, suggesting that in the BMA/PBMA system, the degree of confinement is relatively low. Future studies will continue to investigate how the entropy change on reaction is affected by confinement.

Ionic-liquid-mediated poly(dimethylsiloxane)- grafted carbon nanotube fiber prepared by the sol-gel technique for the head space solid-phase microextraction of methyl tert-butyl ether using GC.

PubMed

Vatani, Hossein; Yazdi, Ali Sarafraz

2014-01-01

A headspace solid-phase microextraction method was developed for the preconcentration and extraction of methyl tert-butyl ether. An ionic-liquid-mediated multiwalled carbon nanotube-poly(dimethylsiloxane) hybrid coating, which was prepared by covalent functionalization of multiwalled carbon nanotubes with hydroxyl-terminated poly(dimethylsiloxane) using the sol-gel technique, was used as solid-phase microextraction adsorbent. This innovative fiber exhibited a highly porous surface structure, high thermal stability (at least 320°C) and long lifespan (over 210 uses). Potential factors affecting the extraction efficiency were optimized. Under the optimum conditions, the method LOD (S/N = 3) was 0.007 ng/mL and the LOQ (S/N = 10) was 0.03 ng/mL. The calibration curve was linear in the range of 0.03-200 ng/mL. The RSDs for one fiber (repeatability, n = 5) at three different concentrations (0.05, 1, and 150 ng/mL) were 5.1, 4.2, and 4.6% and for the fibers obtained from different batches (reproducibility, n = 3) were 6.5, 5.9, and 6.3%, respectively. The developed method was successfully applied to the determination of methyl tert-butyl ether in different real water samples on three consecutive days. The relative recoveries for the spiked samples with 0.05, 1, and 150 ng/mL were between 94-104%. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

IRIS Toxicological Review of Tert-Butyl Alcohol (Tert-Butanol) ...

EPA Pesticide Factsheets

The IRIS Toxicological Review of tert-Butyl Alcohol (tert-Butanol) was released for external peer review in June 2017. EPA’s Science Advisory Board’s (SAB) Chemical Assessment Advisory Committee (CAAC) will conduct a peer review of the scientific basis supporting the tert-butanol assessment and release a final report of their review. Information regarding the peer review can be found on the SAB website. EPA is conducting an Integrated Risk Information System (IRIS) health assessment for tert-butanol. The outcome of this project is a Toxicological Review and IRIS Summary for tert-butanol that will be entered into the IRIS database.

Radiation degradation of spent butyl rubbers

NASA Astrophysics Data System (ADS)

Telnov, A. V.; Zavyalov, N. V.; Khokhlov, Yu. A.; Sitnikov, N. P.; Smetanin, M. L.; Tarantasov, V. P.; Shadrin, D. N.; Shorikov, I. V.; Liakumovich, A. L.; Miryasova, F. K.

2002-03-01

Radiation methods of materials modification applied in technological chains can have significant economical and ecological advantages as compared to the established chemical, thermal and mechanical methods. Each year the problems of nature resources economy through the use of production and consumption wastes acquire a more significant value, as it allows to solve also ecological issues along with economical ones. This is mostly acute in relation to polymeric systems based on saturated rubbers, for example butyl rubber (BR) used in the tyre industry, as due to their high resistance to the action of oxygen, ozone, solar radiation and bacteria, they contaminate the environment for rather a long period. At VNIIEF and KSPU experiments were carried out on application of electron beams with energy from 6 to 10 MeV for radiation destruction of spent rubber based on BR. The radiation-degraded material was tested for re-use in the formulation of initial diaphragm mixture, rubber mixture for producing rubberized fabric and roofing.

Biotic and abiotic transformations of methyl tertiary butyl ether (MTBE).

PubMed

Fischer, Axel; Oehm, Claudia; Selle, Michael; Werner, Peter

2005-11-01

Methyl tertiary butyl ether (MTBE) is a fuel additive which is used all over the world. In recent years it has often been found in groundwater, mainly in the USA, but also in Europe. Although MTBE seems to be a minor toxic, it affects the taste and odour of water at concentrations of < 30 microg/L. Although MTBE is often a recalcitrant compound, it is known that many ethers can be degraded by abiotic means. The aim of this study was to examine biotic and abiotic transformations of MTBE with respect to the particular conditions of a contaminated site (former refinery) in Leuna, Germany. Groundwater samples from wells of a contaminated site were used for aerobic and anaerobic degradation experiments. The abiotic degradation experiment (hydrolysis) was conducted employing an ion-exchange resin and MTBE solutions in distilled water. MTBE, tertiary butyl formate (TBF) and tertiary butyl alcohol (TBA) were measured by a gas chromatograph with flame ionisation detector (FID). Aldehydes and organic acids were respectively analysed by a gas chromatograph with electron capture detector (ECD) and high-performance ion chromatography (HPIC). Under aerobic conditions, MTBE was degraded in laboratory experiments. Only 4 of a total of 30 anaerobic experiments exhibited degradation, and the process was very slow. In no cases were metabolites detected, but a few degradation products (TBF, TBA and formic acid) were found on the site, possibly due to the lower temperatures in groundwater. The abiotic degradation of MTBE with an ion-exchange resin as a catalyst at pH 3.5 was much faster than hydrolysis in diluted hydrochloric acid (pH 1.0). Although the aerobic degradation of MTBE in the environment seems to be possible, the specific conditions responsible are widely unknown. Successful aerobic degradation only seems to take place if there is a lack of other utilisable compounds. However, MTBE is often accompanied by other fuel compounds on contaminated sites and anaerobic conditions

EVALUATION OF METHYL TERT-BUTYL ETHER (MTBE) AS AN INTERFERENCE ON COMMERCIAL BREATH-ALCOHOL ANALYZERS

EPA Science Inventory

Anecdotal reports suggest that high environmental or occupational exposures to the fuel oxygenate methyl tert-butyl ether (MTBE) may result in breath concentrations that are sufficiently elevated to cause a false positive on commercial breath-alcohol analyzers. We evaluated th...

The N-butyl alcohol extract from Hibiscus rosa-sinensis L. flowers enhances healing potential on rat excisional wounds.

PubMed

Shen, Hui-Min; Chen, Chun; Jiang, Ji-Yang; Zheng, Yi-Lin; Cai, Wen-Feng; Wang, Bin; Ling, Zhen; Tang, Liu; Wang, Yuan-Hang; Shi, Gang-Gang

2017-02-23

Hibiscus rosa-sinensis L. (HRS), a folk medicine named Zhujin in China, possess anti-tumor, antioxidant, antibacterial, low density lipoprotein oxidation prevention and macrophage death prevention effects. The leaves and red flowers of HRS have been traditionally used to treat with furuncle and ulceration. To investigate the efficacy and possible mechanism of the N-butyl alcohol extract of HRS (NHRS) red flowers in wound healing by analyzing the collagen fiber deposition, angiogenic activity and macrophages action of the NHRS. In an excisional wound healing model in rats, different concentrations of NHRS, or recombinant bovine basic fibroblast growth factor (rbFGF), were respectively applied twice daily for 9 days. Histopathology was assessed on day 9 via hematoxylin and eosin (HE) and Masson's trichrome (MT) staining, and immunohistochemistry for vascular endothelial growth factor (VEGF), transforming growth factor-β1 (TGF-β1) and CD68. Immunomodulation by NHRS was evaluated by a carbon clearance test in mice. Wound healing post-surgery was greater in the rbFGF-control, NHRS-M and MHRS-H groups than in the model and 5% dimethylsulfoxide (DMSO)-control groups after the third day. By the sixth day the wound contraction of NHRS-M and MHRS-H groups was much higher than the rbFGF-control group. HE and MT staining revealed that epithelialization, fibroblast distribution, collagen deposition of NHRS-M- and NHRS-H-control groups were significantly higher than the model group. Moreover, immunohistochemistry showed more intense staining of VEGF, TGF-β1 and CD68 in the rbFGF- and NHRS-control groups, compared to that in model and 5% DMSO-control groups. The clearance and phagocytic indices of NHRS-M- and NHRS-H-control groups were significantly higher than that of the carboxyl methyl cellulose (CMC) group in mice. NHRS accelerates wound repair via enhancing the macrophages activity, accelerating angiogenesis and collagen fiber deposition response mediated by VEGF and TGF

Interaction of copper with dinitrogen tetroxide in 1-butyl-3-methylimidazolium-based ionic liquids.

PubMed

Morozov, I V; Deeva, E B; Glazunova, T Yu; Troyanov, S I; Guseinov, F I; Kustov, L M

2017-03-27

Ionic liquids that are stable toward oxidation and nitration and are based on the 1-n-butyl-3-methylimidazolium cation (BMIm + ) can be used as solvents and reaction media for copper dissolution in liquid dinitrogen tetraoxide N 2 O 4 . The ionic liquid not only favors the dissociation of N 2 O 4 into NO + and NO 3 - , but also takes part in the formation of different crystalline products. Thus, NO[BF 4 ], NO[Cu(NO 3 ) 3 ] and (BMIm) 2 [Cu 2 (CF 3 COO) 6 ] were prepared using (BMIm)A, A - = [BF 4 ] - , (CF 3 SO 2 ) 2 N - , CF 3 COO - , respectively. The formation of a certain product is determined by the nature of the anion A - and the relative solubility of the reaction products in the ionic liquid. Crystals of NO[BF 4 ] were also prepared directly from a mixture of N 2 O 4 and BMImBF 4 . According to XRD single-crystal structure analysis, the structure of NO[BF 4 ] consists of tetrahedral [BF 4 ] - anions and nitrosonium NO + cations; the formation of these ions prove the heterolytic dissociation of N 2 O 4 dissolved in the ionic liquid. The crystal structure of the earlier unknown binuclear copper trifluoroacetate (BMIm) 2 [Cu 2 (CF 3 COO) 6 ] were determined by X-ray diffraction. The peculiarity of this dimer compared to the majority of known dimeric copper(ii) carboxylates is the unusually long CuCu distance (3.15 Å), with Cu(ii) ions demonstrating an atypical coordination of a distorted trigonal bipyramid formed by five O atoms of five trifluoroacetate groups.

Forensic analysis of tertiary-butyl alcohol (TBA) detections in a hydrocarbon-rich groundwater basin.

PubMed

Quast, Konrad W; Levine, Audrey D; Kester, Janet E; Fordham, Carolyn L

2016-04-01

Tertiary-butyl alcohol (TBA), a high-production volume (HPV) chemical, was sporadically detected in groundwater and coalbed methane (CBM) wells in southeastern Colorado's hydrocarbon-rich Raton Basin. TBA concentrations in shallow water wells averaged 75.1 μg/L, while detections in deeper CBM wells averaged 14.4 μg/L. The detection of TBA prompted a forensic investigation to try to identify potential sources. Historic and recent data were reviewed to determine if there was a discernable pattern of TBA occurrence. Supplemental samples from domestic water wells, monitor wells, CBM wells, surface waters, and hydraulic fracturing (HF) fluids were analyzed for TBA in conjunction with methyl tertiary-butyl ether (MTBE) and ethyl tertiary-butyl ether (ETBE), proxies for evidence of contamination from reformulated gasoline or associated oxygenates. Exploratory microbiological sampling was conducted to determine if methanotrophic organisms co-occurred with TBA in individual wells. Meaningful comparisons of historic TBA data were limited due to widely varying reporting limits. Mapping of TBA occurrence did not reveal any spatial patterns or physical associations with CBM operations or contamination plumes. Additionally, TBA was not detected in HF fluids or surface water samples. Given the widespread use of TBA in industrial and consumer products, including water well completion materials, it is likely that multiple diffuse sources exist. Exploratory data on stable isotopes, dissolved gases, and microbial profiling provide preliminary evidence that methanotrophic activity may be producing TBA from naturally occurring isobutane. Reported TBA concentrations were significantly below a conservative risk-based drinking water screening level of 8000 μg/L derived from animal toxicity data.

The gaseous enthalpy of formation of the ionic liquid 1-butyl-3-methylimidazolium dicyanamide from combustion calorimetry, vapor pressure measurements, and ab initio calculations.

PubMed

Emel'yanenko, Vladimir N; Verevkin, Sergey P; Heintz, Andreas

2007-04-04

Ionic liquids are attracting growing interest as alternatives to conventional molecular solvents. Experimental values of vapor pressure, enthalpy of vaporization, and enthalpy of formation of ionic liquids are the key thermodynamic quantities, which are required for the validation and development of the molecular modeling and ab initio methods toward this new class of solvents. In this work, the molar enthalpy of formation of the liquid 1-butyl-3-methylimidazolium dicyanamide, 206.2 +/- 2.5 kJ.mol-1, was measured by means of combustion calorimetry. The molar enthalpy of vaporization of 1-butyl-3-methylimidazolium dicyanamide, 157.2 +/- 1.1 kJ.mol-1, was obtained from the temperature dependence of the vapor pressure measured using the transpiration method. The latter method has been checked with measurements of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide, where data are available from the effusion technique. The first experimental determination of the gaseous enthalpy of formation of the ionic liquid 1-butyl-3-methylimidazolium dicyanamide, 363.4 +/- 2.7 kJ.mol-1, from thermochemical measurements (combustion and transpiration) is presented. Ab initio calculations of the enthalpy of formation in the gaseous phase have been performed for 1-butyl-3-methylimidazolium dicyanamide using the G3MP2 theory. Excellent agreement with experimental results has been observed. The method developed opens a new way to obtain thermodynamic properties of ionic liquids which have not been available so far.

MONITORED NATURAL ATTENUATION OF TERTIARY BUTYL ALCOHOL (TBA) IN GROUND WATER AT GASOLINE SPILL SITES

EPA Science Inventory

The state agencies that implement the Underground Storage Tank program rely heavily on Monitored Natural Attenuation (MNA) to clean up contaminants such as benzene and methyl tertiary butyl ether (MTBE) at gasoline spill sites. This is possible because the contaminants are biolo...

Process Intensification of Enzymatic Fatty Acid Butyl Ester Synthesis Using a Continuous Centrifugal Contactor Separator.

PubMed

Ilmi, Miftahul; Abduh, Muhammad Y; Hommes, Arne; Winkelman, Jozef G M; Hidayat, Chusnul; Heeres, Hero J

2018-01-17

Fatty acid butyl esters were synthesized from sunflower oil with 1-butanol using a homogeneous Rhizomucor miehei lipase in a biphasic organic (triglyceride, 1-butanol, hexane)- water (with enzyme) system in a continuous setup consisting of a cascade of a stirred tank reactor and a continuous centrifugal contactor separator (CCCS), the latter being used for integrated reaction and liquid-liquid separation. A fatty acid butyl ester yield up to 93% was obtained in the cascade when operated in a once-through mode. The cascade was run for 8 h without operational issues. Enzyme recycling was studied by reintroduction of the water phase from the CCCS outlet to the stirred tank reactor. Product yield decreased over time to an average of 50% of the initial value, likely due to accumulation of 1-butanol in water phase, loss of enzyme due to agglomeration, and the formation of a separate enzyme layer.

40 CFR 464.21 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 67. butyl benzyl phthalate 68. di-n-butyl phthalate 70. diethyl phthalate 71. dimethyl phthalate 72... 67. butyl benzyl phthalate 68. di-n-butyl phthalate 70. diethyl phthalate 71. dimethyl phthalate 72...-ethylhexyl) phthalate 67. butyl benzyl phthalate 68. di-n-butyl phthalate 70. diethyl phthalate 71. dimethyl...

40 CFR 464.21 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 67. butyl benzyl phthalate 68. di-n-butyl phthalate 70. diethyl phthalate 71. dimethyl phthalate 72... 67. butyl benzyl phthalate 68. di-n-butyl phthalate 70. diethyl phthalate 71. dimethyl phthalate 72...-ethylhexyl) phthalate 67. butyl benzyl phthalate 68. di-n-butyl phthalate 70. diethyl phthalate 71. dimethyl...

Twenty-four month results from a randomized trial of cyanoacrylate closure versus radiofrequency ablation for the treatment of incompetent great saphenous veins.

PubMed

Gibson, Kathleen; Morrison, Nick; Kolluri, Raghu; Vasquez, Michael; Weiss, Robert; Cher, Daniel; Madsen, Monte; Jones, Andrew

2018-06-15

We previously reported 3-month and 12-month occlusion rates after treatment of clinically symptomatic saphenous vein reflux with either cyanoacrylate closure (CAC) using the VenaSeal Closure System (Medtronic, Dublin, Ireland) or radiofrequency ablation (RFA) in a randomized, multicenter, clinical trial, VenaSeal Sapheon Closure System vs Radiofrequency Ablation for Incompetent Great Saphenous Veins (VeClose). Herein we report the 24-month follow-up results of the VeClose trial. There were 222 patients with symptomatic great saphenous vein (GSV) incompetence who were randomly assigned to receive either CAC (n = 108) or RFA (n = 114). Patients were not allowed to receive adjunctive treatment of tributary varicosities until after the 3-month visit. Duplex ultrasound of the target vein was performed at day 3 and months 1, 3, 6, 12, and 24 after treatment, and closure was assessed by ultrasound by the treating physician. Overall 24-month success rates were compared; in addition, time to first reopening of the target vein was evaluated using survival analysis. End points such as Venous Clinical Severity Score, EuroQoL-5 Dimension, and Aberdeen Varicose Vein Questionnaire were evaluated. Of 222 randomized patients, 171 completed the 24-month follow-up, which included 87 from the CAC group and 84 from the RFA group. The 24-month complete closure rate was 95.3% in the CAC group and 94.0% in the RFA group, demonstrating continued noninferiority of CAC compared with RFA (P = .0034). Symptoms and quality of life improved similarly in both groups. No clinically significant device- or procedure-related late adverse events occurred. Both CAC and RFA were effective in closure of the target GSV, resulting in similar and significant improvements in the patient's quality of life through 24 months. These results suggest that CAC of the GSV is safe and durable out to 2 years. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Liver Hypertrophy After Percutaneous Portal Vein Embolization: Comparison of N-Butyl-2-Cyanocrylate Versus Sodium Acrylate-Vinyl Alcohol Copolymer Particles in a Swine Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsoumakidou, Georgia, E-mail: gtsoumakidou@yahoo.com; Theocharis, Stamatis, E-mail: theocharis@ath.forthnet.gr; Ptohis, Nikolaos, E-mail: nikptohis@yahoo.gr

2011-10-15

Purpose: Percutaneous portal vein embolization (PPVE) induces hypertrophy of the future liver remnant before hepatic resection. The ideal embolic material has not yet been determined. We compared N-butyl-2-cyanocrylate (NBCA) with sodium acrylate-vinyl alcohol copolymer particles using a swine model. Materials and Methods: Twelve pigs underwent PPVE. Six pigs (group A) were embolized with NBCA, and 6 pigs (group B) were embolized with sodium acrylate-vinyl alcohol copolymer particles. Computed tomographic volumetry of the embolized lobe (EL) and the nonembolized lobe (NEL), along with liver function tests, was performed before and at 14 and 28 days after embolization. Tissue samples from bothmore » lobes were taken 14 and 28 days after PPVE. Results: NEL-volume and NEL-ratio increases were significantly higher in group A at 14 and 28 days after PPVE (78 and 52% and 91 and 66%, respectively) than in group B (32 and 12% and 28 and 10%, respectively) (p < 0.05). Percent change of the EL-volume was significantly higher for group A at 28 days after PPVE. No statistically significant difference was found between the groups regarding hepatocyte proliferation on the NEL and apoptosis on the EL at both time intervals. Conclusion: PPVE using NBCA is more efficient and causes more NEL hypertrophy than microspheres.« less

Conformations and Barriers to Methyl Group Internal Rotation in Two Asymmetric Ethers: Propyl Methyl Ether and Butyl Methyl Ether

NASA Astrophysics Data System (ADS)

Long, B. E.; Dechirico, F.; Cooke, S. A.

2012-06-01

The conformational preferences of the O-C-C-C unit are important in many biological systems with the unit generally preferring a gauche configuration compared to an anti configuration. Butyl methyl ether and propyl methyl ether provide very simple systems for this phenomenom to manifest. Pure rotational spectra of the title molecules have been recorded using chirped pulse Fourier transform microwave spectroscopy (CP-FTMW). In the case of butyl methyl ether, only one conformer has been observed. This conformer has torsional angles of COCC = 180°, OCCC = 62° and CCCC = 180° (anti-gauche-anti) and rotational constants of A = 10259.4591(33) MHz, B = 1445.6470(13) MHz, and C = 1356.2944(14) MHz. The rotational spectrum was doubled and has been analyzed to produce an effective barrier to methyl group internal rotation of 780(35) cm-1. A prior rotational spectroscopic study on propyl methyl ether had focused only on the high energy anti-anti conformer. We have analyzed spectra from the lowest energy anti-gauche conformer and the spectroscopic constants will be presented. A summary of the differences in conformational energies and methyl group internal rotation barriers for the class of aliphatic asymmetric ethers will be presented. K. N. Houk, J. E. Eksterowicz, Y.-D. Wu, C. D. Fuglesang, D. B. Mitchell. J. Am. Chem. Soc. 115 (4170), 1993. Hiroshi Kato, Jun Nakagawa, Michiro Hayashi. J. Mol. Spectrosc. 80 (272), 1980.

76 FR 38026 - Diethylene Glycol Mono Butyl Ether; Exemption From the Requirement of a Tolerance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

... chemicals. Immunotoxicity studies were available for ethylene glycol mono butyl ether, also a glycol ether... the glycol ether class of chemicals which include structurally similar chemicals ethylene glycol and... potential to cause cancer. Based on the lack of evidence of carcinogenicity potential for ethylene glycol...

Resolution of 1-n-butyl-3-methyl-3-phospholene 1-oxide with TADDOL derivatives and calcium salts of O,O'-Dibenzoyl-(2R,3R)- or O,O'-di-p-toluoyl-(2R,3R)-tartaric acid.

PubMed

Bagi, Péter; Fekete, András; Kállay, Mihály; Hessz, Dóra; Kubinyi, Miklós; Holczbauer, Tamás; Czugler, Mátyás; Fogassy, Elemér; Keglevich, György

2014-03-01

The resolution methods applying (-)-(4R,5R)-4,5-bis(diphenylhydroxymethyl)-2,2-dimethyldioxolane ("TADDOL"), (-)-(2R,3R)-α,α,α',α'-tetraphenyl-1,4-dioxaspiro[4.5]decan-2,3-dimethanol ("spiro-TADDOL"), as well as the acidic and neutral Ca(2+) salts of (-)-O,O'-dibenzoyl- and (-)-O,O'-di-p-toluoyl-(2R,3R)-tartaric acid were extended for the preparation of 1-n-butyl-3-methyl-3-phospholene 1-oxide in optically active form. In one case, the intermediate diastereomeric complex could be identified by single-crystal X-ray analysis. The absolute P-configuration of the enantiomers of the phospholene oxide was also determined by comparing the experimentally obtained and calculated CD spectra. © 2014 Wiley Periodicals, Inc.

Energetic Materials Center Report--Small-Scale Safety and Thermal Testing Evaluation of Butyl Nitrate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsu, Peter C.; Reynolds, John G.

2013-04-26

Butyl Nitrate (BN) was examined by Small-Scale Safety and Thermal (SSST) Testing techniques to determine its sensitivity to impact, friction, spark and thermal exposure simulating handling and storage conditions. Under the conditions tested, the BN exhibits thermal sensitivity above 150 °C, and does not exhibit sensitive to impact, friction or spark.

Simultaneous determination of triacetin, acetic ether, butyl acetate and amorolfine hydrochloride in amorolfine liniment by HPLC.

PubMed

Gao, Yuan; Li, Li; Zhang, Jianjun; Shu, Wenjuan; Gao, Liqiong

2012-04-01

A simple, rapid, specific and precise reversed-phase high-performance liquid chromatographic method was developed for simultaneous estimation of triacetin, acetic ether, butyl acetate and amorolfine in marketed pharmaceutical liniment. Chromatographic separation was performed on a Shimadzu VP-ODS C(18) column using the mixture of citric acid-hydrochloric acid-sodium hydrate buffer (pH 3.0), acetonitrile and methanol (32:30:38) as the mobile phase at a flow rate of 1.0 mL/min with UV-detection at 215 nm. The method separated the four components simultaneously in less than 10 min. The validation of the method was performed with respect to specificity, linearity, accuracy, and precision. The calibration curves were linear in the range of 35.1-81.9 μ/mL for triacetin, 431.1-1005.9 μ/mL for acetic ether, 167.0-389.7 μ/mL for butyl acetate and 151.0-352.3 μ/mL for amorolfine. The mean 100% spiked recovery for triacetin, acetic ether, butyl acetate and amorolfine is 99.43 ± 0.42, 101.5 ± 1.09, 101.4 ± 1.02 and 100.8 ± 0.69, respectively. The intra-day and inter-day relative standard deviation values were <2.0%. The limits of detection of these compounds ranged from 0.08 to 5.88 ng. The utility of the procedure was verified by its application to the commercial liniment.

Toxic effect and genotoxicity of the semisynthetic derivatives dillapiole ethyl ether and dillapiole n-butyl ether for control of Aedes albopictus (Diptera: Culicidae).

PubMed

da Fonseca Meireles, Sabrina; Domingos, Pedro Rauel Cândido; da Silva Pinto, Ana Cristina; Rafael, Míriam Silva

2016-09-01

Two derivatives of dillapiole, dillapiole ethyl ether (1KL39-B) and butyl ether-n dillapiole (1KL43-C), were studied for their toxicity and genotoxicity against Aedes albopictus, to help develop new strategies for the control of this potential vector of dengue and other arboviruses, because it is resistant to synthetic insecticides. Eggs and larvae exposed to different concentrations of 1KL39-B (25, 30, 50, 70, and 80μg/mL) and of 1KL43-C (12.5, 20, 25, 30 and 40μg/mL) exhibited toxicity and susceptibility, with 100% mortality. The LC50 was 55.86±1.57μg/mL for 1KL39-B and 25.60±1.24μg/mL for 1KL43-C, while the LC90 was 70.12μg/mL for 1KL39-B and 41.51μg/mL for 1KL43-C. The gradual decrease in oviposition of the females of the G1 to G4 generations was proportional to the increase in concentrations of these compounds, which could be related to the cumulative effect of cell anomalies in neuroblasts and oocytes (P<0.05), including micronuclei, budding, multinucleated cells and nuclear bridges. These findings showed that both 1KL39-B and 1KL43-C can serve as potential alternatives in the control of A. albopictus. Copyright © 2016. Published by Elsevier B.V.

Determining the presence of dipropylene glycol n-butyl ether (DPnB) in sediments and sands contaminated by the Deepwater Horizon (DWH) oil spill

NASA Astrophysics Data System (ADS)

Boehman, B.; Lyons, S. L.; Geng, Z.; White, H. K.

2016-02-01

In an attempt to mitigate the impact of the oil released from the Deepwater Horizon (DWH) oil spill, chemical dispersants (Corexit 9527 and Corexit 9500A, from Nalco Co.) were applied to the surface and subsurface waters of the Gulf of Mexico. Over the past five years studies have investigated the fate of oil from the spill and the applied dispersants, although significantly less is known about the latter. To determine the presence of dispersant in environmental samples, dioctyl sodium sulfosuccinate (DOSS), a component of both Corexit mixtures, has previously been examined in samples taken from the water column, coastal beaches and deep-sea sediments. This study expands upon this work by developing a method to extract dipropylene glycol n-butyl ether (DPnB), an additional compound present in Corexit, from sand and sediment samples contaminated with oil from the DWH spill. Controls spiked with a known quantity of DPnB were extracted with a range of organic solvents of different polarities to optimize the extraction of DPnB. Total organic extracts were then subjected to silica gel chromatography to isolate DPnB from any oil that was co-extracted. All samples were concentrated prior to analysis via gas chromatography mass spectrometry (GC/MS) using selected ion monitoring (SIM). The analysis and quantification of DPnB, which has different chemical properties than DOSS, will provide additional insight into the mechanisms that control the fate of oil and dispersant mixtures in the marine environment.

Protective effect of black garlic extracts on tert-Butyl hydroperoxide-induced injury in hepatocytes via a c-Jun N-terminal kinase-dependent mechanism

PubMed Central

Lee, Ko-Chao; Teng, Chih-Chuan; Shen, Chien-Heng; Huang, Wen-Shih; Lu, Chien-Chang; Kuo, Hsing-Chun; Tung, Shui-Yi

2018-01-01

Black garlic has been reported to show multiple bioactivities against the development of different diseases. In the present study, the hepatoprotective effect of black garlic on injured liver cells was investigated. Rat clone-9 hepatocytes were used for all experiments; tert-Butyl hydroperoxide (tBHP) was used to induce injury of rat clone-9 hepatocytes. The contents of malondialdehyde (MDA) and glutathione (GSH); anti-oxidative enzyme activities of catalase (CAT), superoxide dismutase (SOD), glutathione peroxidase (GPx); and mRNA expression levels of interleukin (IL)-6 and IL-8 in rat clone-9 hepatocytes were determined to evaluate the level of cell damage. Black garlic extracts were demonstrated to significantly attenuate tBHP-induced cell death of rat clone-9 hepatocytes (P<0.05). Pretreatment with black garlic extracts antagonized GSH depletion, tBHP-increased MDA accumulation and the mRNA expression level of IL-6/IL-8, and tBHP-decreased antioxidative enzyme activities (all P<0.05). Moreover, the present study revealed that c-Jun N-terminal kinase signaling regulated black garlic-inhibited tBHP effects in rat clone-9 hepatocytes. Our findings demonstrate that black garlic has the hepatoprotective potential to block tBHP-damaged effects on cell death, lipid peroxidation, oxidative stress, and inflammation in rat clone-9 hepatocytes. Thus, the present study indicates that black garlic may be an excellent natural candidate in the development of adjuvant therapy and healthy foods for liver protection. PMID:29456651

Synthesis of t-butyl 2-(4-hydroxy-3-methoxybenzylidene)hydrazine carboxylate: Experimental and theoretical investigations of its properties

NASA Astrophysics Data System (ADS)

Bhat, Muzzaffar A.; Lone, Shabir H.; Mir, Muzzaffar A.; Majid, Sheikh A.; Bhat, Haroon Mohi-ud-din; Butcher, Raymond J.; Srivastava, Sanjay K.

2018-07-01

A convenient and facile synthesis of t-butyl-2-(4-hydroxy-3-methoxybenzylidene)hydrazine carboxylate (1) was accomplished by refluxing t-butyl carbazate with an appropriate aldehyde in ethanol. The resulting compound was characterized using spectral data analysis augmented by X-ray. Single crystal analysis depicted that compound 1 crystallizes in a monoclinic crystal system with P 21/c space group having trans-geometry at the Cdbnd N bond. The structural and electronic properties of the title compound have been calculated using DFT/B3LYP/6-311G (d,p) level of theory. Theoretically obtained parameters were well compared to the experimentally obtained results which depicted excellent agreement. Molecular electrostatic potential surface, frontier orbital analysis and vibrational analysis were also carried out. HOMO-LUMO energy gap was calculated which allowed the calculation of relative reactivity descriptors like chemical hardness, chemical inertness, chemical potential, nucleophilicity and electrophilicity index of the synthesized product. Pass prediction was carried out which revealed that compound 1 can be highly active against Mcl-1 enzyme, with Pa of 0.544. Based on Pass, molecular docking of compound 1 was carried out against Mcl-1 protein. Compound 1 displayed a binding free energy of -5.22 kcal/mol and inhibition constant of 149.06 μM and 1 depicted only alkyl hydrophobic and mixed pi/alkyl hydrophobic interactions with Mcl-1 enzyme. In short, this study reveals the synthesis of a new schiff base, and unravels the structural, electronic and biological properties of the title compound, paving way for further research in the field of drug development.

Di-n-butyl phthalate prompts interruption of spermatogenesis, steroidogenesis, and fertility associated with increased testicular oxidative stress in adult male rats.

PubMed

Nelli, Giribabu; Pamanji, Sreenivasula Reddy

2017-08-01

Di-n-butyl phthalate (DBP) is extensively used as plasticizer, and it was ubiquitary released into the environment. The present study was aimed to investigate the effect of DBP on reproductive competence in adult male rats. Adult male rats were received corn oil or DBP injection intraperitoneally (ip) at 100 and 500 mg/kg body weight on 90, 97, 104, and 111 days. Following completion of the experimental period, adult male rats were cohabitated with untreated proestrus female rats for determination of fertilization capacity. Then, adult male rats were sacrificed, and other reproductive endpoints were determined by histopathology and biochemical analysis. The results revealed significant reduction of fertilization potential by decrease mating, fertility indices with increase pre-implantation and post-implantation losses, and resorptions in normal female rat cohabitation with DBP-treated adult male rats. The testes, seminal vesicle tissue somatic indices, epididymal sperm count, motility, viability, and hypoosmotic swelling (HOS) sperm were significantly decreased with increased sperm morphological abnormalities in DBP-treated adult male rats. The disorientation of spermatogenic cells decreased the diameter and epithelial thickness of seminiferous tubule in the testicular histopathology of DBP-exposed rats. Significant reduction of testicular 3β-hydroxysteroid dehydrogenase and 17β-hydroxysteroid dehydrogenase enzyme levels and serum testosterone with increased follicle-stimulating hormone (FSH) and luteinizing hormone (LH) levels were observed in DBP-treated groups. Higher testicular oxidative stress marker (lipid peroxidation product) with lower antioxidant enzymes such as superoxide dismutase, catalase, and glutathione peroxidase levels in DBP-exposed groups was observed. From these results, it can be concluded that DBP increases oxidative stress; it leads to impairment of spermatogenesis, steroidogenesis, and fertility in adult male rats.

Induction and persistence of abnormal testicular germ cells following gestational exposure to di-(n-butyl) phthalate in p53-null mice.

PubMed

Saffarini, Camelia M; Heger, Nicholas E; Yamasaki, Hideki; Liu, Tao; Hall, Susan J; Boekelheide, Kim

2012-01-01

Phthalate esters are commonly used plasticizers found in many household items, personal care products, and medical devices. Animal studies have shown that in utero exposure to di-(n-butyl) phthalate (DBP) within a critical window during gestation causes male reproductive tract abnormalities resembling testicular dysgenesis syndrome. Our studies utilized p53-deficient mice for their ability to display greater resistance to apoptosis during development. This model was chosen to determine whether multinucleated germ cells (MNG) induced by gestational DBP exposure could survive postnatally and evolve into testicular germ cell cancer. Pregnant dams were exposed to DBP (500 mg/kg/day) by oral gavage from gestational day 12 until birth. Perinatal effects were assessed on gestational day 19 and postnatal days 1, 4, 7, and 10 for the number of MNGs present in control and DBP-treated p53-heterozygous and null animals. As expected, DBP exposure induced MNGs, with greater numbers found in p53-null mice. Additionally, there was a time-dependent decrease in the incidence of MNGs during the early postnatal period. Histologic examination of adult mice exposed in utero to DBP revealed persistence of abnormal germ cells only in DBP-treated p53-null mice, not in p53-heterozygous or wild-type mice. Immunohistochemical staining of perinatal MNGs and adult abnormal germ cells was negative for both octamer-binding protein 3/4 and placental alkaline phosphatase. This unique model identified a role for p53 in the perinatal apoptosis of DBP-induced MNGs and provided insight into the long-term effects of gestational DBP exposure within a p53-null environment.

Computational investigation of non-covalent interactions in 1-butyl 3-methylimidazolium/bis(trifluoromethylsulfonyl)imide [bmim][Tf2N] in EMD and NEMD

NASA Astrophysics Data System (ADS)

Blanco-Díaz, Edgar G.; Vázquez-Montelongo, Erik A.; Cisneros, G. Andrés; Castrejón-González, Edgar Omar

2018-02-01

Non-covalent interactions (NCIs) play a crucial role in the behavior and properties of ionic liquids (ILs). These interactions are particularly important for non-equilibrium properties such as the change in viscosity due to shearing forces (shear viscosity). Therefore, a detailed understanding of these interactions can improve our understanding of these important classes of liquids. Here, we have employed quantum mechanical energy decomposition analysis (EDA) and NCI analysis to investigate a series of representative 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf2N]) ion pairs extracted from classical equilibrium and non-equilibrium molecular dynamics simulations. EDA based on symmetry-adapted perturbation theory (SAPT) for the complete monomers, as well as fragment SAPT (FSAPT), for the functional fragments has been carried out. In general, the electrostatic component comprises ≈80% of the intermolecular interaction, and significant contributions from other components (induction and dispersion) are also observed, especially for interactions involving bifurcated hydrogen bonds. The FSAPT analysis suggests that caution is warranted when employing simplified assumptions for non-bonded interactions, e.g., focusing only on hydrogen bonds between functional fragments, since this view may not provide a complete picture of the complicated interactions between the ions. In non-equilibrium molecular dynamics, the total interaction energies of some fragments have a significant qualitative change as the shear rate increases. Our results indicate that the inter-fragment interactions play a fundamental role in the viscous behavior of ILs, suggesting that the exclusive use of geometric criteria to analyze inter-molecular interactions in these systems is not sufficient to investigate shear-thinning effects.

The relationship between crystal structure and methyl and t-butyl group dynamics in van der Waals organic solids

NASA Astrophysics Data System (ADS)

Beckmann, Peter A.; Paty, Carol; Allocco, Elizabeth; Herd, Maria; Kuranz, Carolyn; Rheingold, Arnold L.

2004-03-01

We report x-ray diffractometry in a single crystal of 2-t-butyl-4-methylphenol (TMP) and low-frequency solid state nuclear magnetic resonance (NMR) proton relaxometry in a polycrystalline sample of TMP. The x-ray data show TMP to have a monoclinic, P21/c, structure with eight molecules per unit cell and two crystallographically inequivalent t-butyl group (C(CH3)3) sites. The proton spin-lattice relaxation rates were measured between 90 and 310 K at NMR frequencies of 8.50, 22.5, and 53.0 MHz. The relaxometry data is fitted with two models characterizing the dynamics of the t-butyl groups and their constituent methyl groups, both of which are consistent with the determined x-ray structure. In addition to presenting results for TMP, we review previously reported x-ray diffractometry and low-frequency NMR relaxometry in two other van der Waals solids which have a simpler structure. In both cases, a unique model for the reorientational dynamics was found. Finally, we review a similar previously reported analysis in a van der Waals solid with a very complex structure in which case fitting the NMR relaxometry requires very many parameters and serves mainly as a flag for a careful x-ray diffraction study.

Determination of the solubility parameter of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate by inverse gas chromatography.

PubMed

Ma, Xiaohong; Wang, Qiang; Li, Xiaoping; Tang, Jun; Zhang, Zhengfang

2015-11-01

Thermodynamic properties of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM] BF4) were determined via inverse gas chromatography (IGC). Two groups of solvents with different chemical natures and polarities were used to obtain information about [BMIM] BF4-solvent interactions. The specific retention volume, molar heat of sorption, weight fraction activity coefficient, Flory-Huggins interaction parameter as well as solubility parameter were also determined in a temperature range of 333 - 373 K. The results showed that the selected solvents n-C10 to n-C12, carbon tetrachloride, cyclohexane and toluene were poor solvents for [BMIM] BF4, while dichloromethane, acetone, chloroform, methyl acetate, ethanol and methanol were favorite solvents for [BMIM] BF4. In addition, the solubility parameter of [ BMIM] BF4 was determined as 23.39 (J/cm3)0.5 by the extrapolation at 298 K. The experiment proved that IGC was a simple and accurate method to obtain the thermodynamic properties of ionic liquids. This study could be used as a reference to the application and research of the ionic liquids.

Process Intensification of Enzymatic Fatty Acid Butyl Ester Synthesis Using a Continuous Centrifugal Contactor Separator

PubMed Central

2017-01-01

Fatty acid butyl esters were synthesized from sunflower oil with 1-butanol using a homogeneous Rhizomucor miehei lipase in a biphasic organic (triglyceride, 1-butanol, hexane)– water (with enzyme) system in a continuous setup consisting of a cascade of a stirred tank reactor and a continuous centrifugal contactor separator (CCCS), the latter being used for integrated reaction and liquid–liquid separation. A fatty acid butyl ester yield up to 93% was obtained in the cascade when operated in a once-through mode. The cascade was run for 8 h without operational issues. Enzyme recycling was studied by reintroduction of the water phase from the CCCS outlet to the stirred tank reactor. Product yield decreased over time to an average of 50% of the initial value, likely due to accumulation of 1-butanol in water phase, loss of enzyme due to agglomeration, and the formation of a separate enzyme layer. PMID:29398779

Production of fatty acid butyl esters using the low cost naturally immobilized Carica papaya lipase.

PubMed

Su, Erzheng; Wei, Dongzhi

2014-07-09

In this work, the low cost naturally immobilized Carica papaya lipase (CPL) was investigated for production of fatty acid butyl esters (FABE) to fulfill the aim of reducing the lipase cost in the enzymatic butyl-biodiesel process. The CPL showed specificities to different alcohol acyl acceptors. Alcohols with more than three carbon atoms did not have negative effects on the CPL activity. The CPL catalyzed butanolysis for FABE production was systematically investigated. The reaction solvent, alcohol/oil molar ratio, enzyme amount, reaction temperature, and water activity all affected the butanolysis process. Under the optimized conditions, the highest conversion of 96% could be attained in 24 h. These optimal conditions were further applied to CPL catalyzed butanolysis of other vegetable oils. All of them showed very high conversion. The CPL packed-bed reactor was further developed, and could be operated continuously for more than 150 h. All of these results showed that the low cost Carica papaya lipase can be used as a promising lipase for biodiesel production.

Small-bubble transport and splitting dynamics in a symmetric bifurcation.

PubMed

Qamar, Adnan; Warnez, Matthew; Valassis, Doug T; Guetzko, Megan E; Bull, Joseph L

2017-08-01

Simulations of small bubbles traveling through symmetric bifurcations are conducted to garner information pertinent to gas embolotherapy, a potential cancer treatment. Gas embolotherapy procedures use intra-arterial bubbles to occlude tumor blood supply. As bubbles pass through bifurcations in the blood stream nonhomogeneous splitting and undesirable bioeffects may occur. To aid development of gas embolotherapy techniques, a volume of fluid method is used to model the splitting process of gas bubbles passing through artery and arteriole bifurcations. The model reproduces the variety of splitting behaviors observed experimentally, including the bubble reversal phenomenon. Splitting homogeneity and maximum shear stress along the vessel walls is predicted over a variety of physical parameters. Small bubbles, having initial length less than twice the vessel diameter, were found unlikely to split in the presence of gravitational asymmetry. Maximum shear stresses were found to decrease exponentially with increasing Reynolds number. Vortex-induced shearing near the bifurcation is identified as a possible mechanism for endothelial cell damage.

Separation of Poly(styrene-block-t-butyl methacrylate) Copolymers by Various Liquid Chromatography Techniques

PubMed Central

Šmigovec Ljubič, Tina; Pahovnik, David; Žigon, Majda; Žagar, Ema

2012-01-01

The separation of a mixture of three poly(styrene-block-t-butyl methacrylate) copolymers (PS-b-PtBMA), consisting of polystyrene (PS) blocks of similar length and t-butyl methacrylate (PtBMA) blocks of different lengths, was performed using various chromatographic techniques, that is, a gradient liquid chromatography on reversed-phase (C18 and C8) and normal-phase columns, a liquid chromatography under critical conditions for polystyrene as well as a fully automated two-dimensional liquid chromatography that separates block copolymers by chemical composition in the first dimension and by molar mass in the second dimension. The results show that a partial separation of the mixture of PS-b-PtBMA copolymers can be achieved only by gradient liquid chromatography on reversed-phase columns. The coelution of the two block copolymers is ascribed to a much shorter PtBMA block length, compared to the PS block, as well as a small difference in the length of the PtBMA block in two of these copolymers, which was confirmed by SEC-MALS and NMR spectroscopy. PMID:22489207

Transcatheter arterial embolization for traumatic mesenteric bleeding: a 15-year, single-center experience

PubMed Central

Shin, Jong Soo; Shin, Ji Hoon; Ko, Heung-Kyu; Kim, Jong Woo; Yoon, Hyun-Ki

2016-01-01

PURPOSE We aimed to assess the safety and effectiveness of transcatheter arterial embolization (TAE) for mesenteric bleeding following trauma. METHODS From 2001 to 2015, 12 patients were referred to our interventional unit for mesenteric bleeding following trauma, based on clinical decisions and computed tomography (CT) images. After excluding one patient with no bleeding focus and one patient who underwent emergency surgery, a total of 10 patients (male:female ratio, 9:1; mean age, 52.1 years) who underwent super selective TAE of visceral arteries were included in this study. Technical and clinical success, complications, and 30-day mortality rate were analyzed. RESULTS In 10 patients who underwent TAE, the types of trauma were motor vehicle collision (n=6), fall (n=2), assault (n=1), and penetrating injury (n=1), and the bleeding arteries were in the pancreaticoduodenal arterial arcade (n=4), jejunal artery (n=3), colic artery (n=2), and sigmoid artery (n=1). N-butyl-2-cyanoacrylate (NBCA) (n=2), microcoils (n=2), and combinations of NBCA, microcoils, or gelatin sponge particles (n=6) were used as embolic agents. Technical success was achieved in all 10 patients, with immediate cessation of bleeding. Clinical success rate was 90% (9/10), and all patients were discharged with no further treatment required for mesenteric bleeding. However, one patient showed rebleeding 10 days later and underwent repeated TAE with successful result. There were no TAE-related ischemic complications such as bowel infarction. The 30-day mortality rate was 0%. CONCLUSION Our clinical experience suggests that TAE used to control mesenteric bleeding following trauma is safe and effective as a minimally invasive alternative to surgery. PMID:27306658

Physiologically based pharmacokinetic model for ethyl tertiary‐butyl ether and tertiary‐butyl alcohol in rats: Contribution of binding to α2u–globulin in male rats and high‐exposure nonlinear kinetics to toxicity and cancer outcomes

PubMed Central

Ring, Caroline; Banton, Marcy I.; Leavens, Teresa L.

2016-01-01

Abstract In cancer bioassays, inhalation, but not drinking water exposure to ethyl tertiary‐butyl ether (ETBE), caused liver tumors in male rats, while tertiary‐butyl alcohol (TBA), an ETBE metabolite, caused kidney tumors in male rats following exposure via drinking water. To understand the contribution of ETBE and TBA kinetics under varying exposure scenarios to these tumor responses, a physiologically based pharmacokinetic model was developed based on a previously published model for methyl tertiary‐butyl ether, a structurally similar chemical, and verified against the literature and study report data. The model included ETBE and TBA binding to the male rat‐specific protein α2u–globulin, which plays a role in the ETBE and TBA kidney response observed in male rats. Metabolism of ETBE and TBA was described as a single, saturable pathway in the liver. The model predicted similar kidney AUC0–∞ for TBA for various exposure scenarios from ETBE and TBA cancer bioassays, supporting a male‐rat‐specific mode of action for TBA‐induced kidney tumors. The model also predicted nonlinear kinetics at ETBE inhalation exposure concentrations above ~2000 ppm, based on blood AUC0–∞ for ETBE and TBA. The shift from linear to nonlinear kinetics at exposure concentrations below the concentration associated with liver tumors in rats (5000 ppm) suggests the mode of action for liver tumors operates under nonlinear kinetics following chronic exposure and is not relevant for assessing human risk. Copyright © 2016 The Authors Journal of Applied Toxicology Published by John Wiley & Sons Ltd PMID:27885692

INHALATION EXPOSURE TO METHYL TERT-BUTYL ETHER (MTBE) AND DIBROMOCHLOROMETHANE (DBCM) USING CONTINUOUS BREATH ANALYSIS

EPA Science Inventory

The oxygenate methyl tert-butyl ether (MTBE) has been added to gasoline to help meet national ambient air quality standards in those parts of the U.S. that are non-compliant for carbon monoxide. Although MTBE has provided important health benefits in terms of reduced haza...

Two-year drinking water carcinogenicity study of methyl tertiary-butyl ether (MTBE) in Wistar rats.

PubMed

Dodd, Darol; Willson, Gabrielle; Parkinson, Horace; Bermudez, Edilberto

2013-07-01

Methyl tertiary-butyl ether (MTBE) has been used as a gasoline additive to reduce tailpipe emissions and its use has been discontinued. There remains a concern that drinking water sources have been contaminated with MTBE. A two-year drinking water carcinogenicity study of MTBE was conducted in Wistar rats (males, 0, 0.5, 3, 7.5 mg ml(-1); and females, 0, 0.5, 3, and 15 mg ml(-1)). Body weights were unaffected and water consumption was reduced in MTBE-exposed males and females. Wet weights of male kidneys were increased at the end of two years of exposure to 7.5 mg ml(-1) MTBE. Chronic progressive nephropathy was observed in males and females, was more severe in males, and was exacerbated in the high MTBE exposure groups. Brain was the only tissue with a statistically significant finding of neoplasms. One astrocytoma (1/50) was found in a female rat (15 mg ml(-1)). The incidence of brain astrocytomas in male rats was 1/50, 1/50, 1/50 and 4/50 for the 0, 0.5, 3 and 7.5 mg ml(-1) exposure groups, respectively. This was a marginally significant statistical trend, but not statistically significant when pairwise comparisons were made or when multiple comparisons were taken into account. The incidence of astrocytoma fell within historical control ranges for Wistar rats, and the brain has not been identified as a target organ following chronic administration of MTBE, ethyl tert-butyl ether, or tertiary butyl alcohol (in drinking water) to mice and rats. We conclude that the astrocytomas observed in this study are not associated with exposure to MTBE. Copyright © 2011 John Wiley & Sons, Ltd.

Research and Development on Inhalation Toxicologic Evaluation of Red Phosphorus/Butyl Rubber Combustion Products. Phase 4

DTIC Science & Technology

1986-11-15

assignment to treatment groups all rats were subjected to physical examination and specimens were examined for pathogenic bacteria, molds , yeasts, M...HISTOPATHOLOGY: >NO OBSFVABLE ABNORMALITIES. NOT APPLICABLE 180 THE EF"FECTS OF SUBCHRONIC EPOSURES TO RED PHOSPHORUS / BUTYL RUBBER (RP/BR) COMBUSTION

Polymer-gel formation and reformation on irradiation of tertiary-butyl acrylate

NASA Astrophysics Data System (ADS)

Yao, Tiantian; Denkova, Antonia G.; Warman, John M.

2014-04-01

The purpose of the present research was to provide a radiation-chemical basis for the use of tertiary-butyl acrylate gels in radio-fluorogenic dose-imaging applications (Warman et al. 2011a,b, 2013a,b). The radiation-induced polymerization of tertiary-butyl acrylate (TBA) results in the formation of a transparent gel with an optical density lower than 0.1 cm-1 from 600 nm down to 315 nm. The fractional monomer-to-polymer conversion, CM, determined gravimetrically, increases super-linearly with dose, D Gy. Up to CM≈40%, and over the dose rate range D‧=3.5 to 49 cGy s-1, the dose dependence is given by CM=[1+ACM]KD/√D‧ with K=1.43×10-3 Gy-0.5 s-0.5 and A=0.70. For D‧=3.5 cGy s-1 the average polymer size is estimated to be 1.2×105 monomer units or 17 megadalton. For CM≥10% the gel is quasi-rigid, displaying little tendency to flow on a timescale of an hour or more. After removal of monomer by evacuation, the gel can be reformed by adding a volume of monomer to the remaining polymer equal to that removed and allowing this to swell for several days. The dose and dose rate dependence of radiation-induced monomer conversion in the reformed gel show no evidence of a discontinuity caused by the intervening evacuation and reformation procedures.

In vitro study comparing the ability of mono-octanoin and mono-octanoin plus methyl tert-butyl ether to dissolve biliary stones.

PubMed

Tritapepe, R; Cesana, B

1996-01-01

This in vitro study compared the gallstone dissolution rates of mono-octanoin, mono-octanoin plus 10% distilled water, and mono-octanoin plus methyl tert-butyl ether 2:1. Sixteen stones were treated with each solvent at a slow perfusion rate of 3-4 ml/h and a rapid perfusion rate of 2.5 ml/30 min with 20-sec instillation/aspiration cycles, both with and without bile. The stones were weighed before, and 3, 6, 12 and 24 hrs after the start of treatment: the solvent was changed every 30 min. After 24 hrs of instillation/aspiration without bile, the mono-octanoin/methyl tert-butyl ether mixture reduced the weight of the stones by 93%, mono-octanoin plus water by 63%, and mono-octanoin alone by 52%; with bile, the figures were, respectively, 86%, 42% and 40%. The mono-octanoin/methyl tert-butyl ether mixture thus took approximately half the time needed by the other two preparations to dissolve the stones to the same extent, a finding which may be relevant for the clinical dissolution of bile duct stones.

Male reproductive tract lesions at 6, 12, and 18 months of age following in utero exposure to di(n-butyl) phthalate.

PubMed

Barlow, Norman J; McIntyre, Barry S; Foster, Paul M D

2004-01-01

In utero exposure of male rats to the antiandrogen di(n-butyl) phthalate (DBP) leads to decreased anogenital distance (AGD) on postnatal day (PND) 1, increased areolae retention on PND 13, malformations in the male reproductive tract, and histologic testicular lesions including marked seminiferous epithelial degeneration and a low incidence of Leydig cell (LC) adenomas on PND 90. One objective of this study was to determine the incidence and persistence of decreased AGD, increased areolae retention, and LC adenomas in adult rats following in utero DBP exposure. A second objective was to determine whether AGD and areolae retention during the early postnatal period are associated with lesions in the male reproductive tract. Pregnant Crl:CD(SD)BR rats were gavaged with corn oil or DBP at 100 or 500 mg/kg/day, 10 dams per group. Three replicates of rats (n = 30 rats per replicate) were exposed from gestation day 12 to 21 and the male offspring allowed to mature to 6, 12, or 18 months of age. Gross malformations in the male reproductive tract and histologic lesions in the testes were similar to those previously described. However, testicular dysgenesis, a lesion of proliferating LCs and aberrant tubules that has not been previously described in DBP-exposed testes, was diagnosed. The incidence of this lesion was approximately 20% unilateral and 7-18% bilateral in the high-dose group and was similar among all ages examined, implicating a developmental alteration rather than an age-related change. AGD and areolae retention were found to be permanent changes following in utero exposure to 500 mg/kg/day of DBP. Decreased AGD was a sensitive predictor of lesions in the male reproductive tract, relatively small changes in AGD were associated with a significant incidence of male reproductive malformations. In utero DBP exposure induced proliferative developmental lesions, some of which would have been diagnosed as LC adenomas by the morphological criteria set forth by the

Synchrotron Photoionization Investigation of the Oxidation of Ethyl tert-Butyl Ether.

PubMed

Winfough, Matthew; Yao, Rong; Ng, Martin; Catani, Katherine; Meloni, Giovanni

2017-02-23

The oxidation of ethyl tert-butyl ether (ETBE), a widely used fuel oxygenated additive, is investigated using Cl atoms as initiators in the presence of oxygen. The reaction is carried out at 293, 550, and 700 K. Reaction products are probed by a multiplexed chemical kinetics photoionization mass spectrometer coupled with the synchrotron radiation produced at the Advanced Light Source (ALS) of the Lawrence Berkeley National Laboratory. Products are identified on the basis of mass-to-charge ratio, ionization energies, and shape of photoionization spectra. Reaction pathways are proposed together with detected primary products.

An Evaluation of the Human Carcinogenic Potential of Ethylene Glycol Butyl Ether (An Interim Position Paper)

EPA Science Inventory

To determine the merit of a petition to remove ethylene glycol ether (EGBE) from the Agency's Hazardous Air Pollutant (HAP) list, EPA has developed an interim final position paper, called An Evaluation of the Human Carcinogenic Potential of Ethylene Glycol Butyl Ether, tha...

Reaction of 1H-1-oxo-2,4,6,8-tetrakis(tert-butyl)phenoxazine with certain group II-IV metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karsanov, I.V.; Ivakhnenko, E.P.; Khandkarova, V.S.

1987-07-10

It has already been shown that 2-amino-4,6-di(tert-butyl)phenol reacts with 3,5-di(tert-butyl)-o-benzoquinone to form 1H-1-oxo-2,4,6,8-tetrakis(tert-butyl)phenoxazine (I), which is readily reduced by alkali metals to the corresponding semiquinone anion-radical (II), and further to the diamagnetic dianion (IIA). They made use of this ability of (I) to undergo reduction to prepare anion-radical salts with different group II-IV metals in the form of their amalgams. In the EPR spectrum of the anion-radical complex (III) formed in the reduction of (I) by a thallium amalgam, the HFI constants of the unpaired electron with magnetic nuclei of the organic ligand are close to those of the K-saltmore » (II), and a substantial HFI is observed with the /sup 203,205/Tl nuclei. This unequivocally proves that the complex has a semiquinone structure, since an HFI on the /sup 203,205/Tl nuclei of such an order of magnitude is characteristic of o-benzoquinone salts with a thallium cation.« less

In situ precise electrospinning of medical glue fibers as nonsuture dural repair with high sealing capability and flexibility.

PubMed

Lv, Fu-Yan; Dong, Rui-Hua; Li, Zhao-Jian; Qin, Chong-Chong; Yan, Xu; He, Xiao-Xiao; Zhou, Yu; Yan, Shi-Ying; Long, Yun-Ze

In this work, we propose an in situ precise electrospinning of medical glue fibers onto dural wound for improving sealing capability, avoiding tissue adhesion, and saving time in dural repair. N-octyl-2-cyanoacrylate, a commercial tissue adhesive (medical glue), can be electrospun into ultrathin fibrous film with precise and homogeneous deposition by a gas-assisted electrospinning device. The self-assembled N-octyl-2-cyanoacrylate film shows high compactness and flexibility owing to its fibrous structure. Simulation experiments on egg membranes and goat meninges demonstrated that this technology can repair small membrane defects quickly and efficiently. This method may have potential application in dural repair, for example, working as an effective supplementary technique for conventional dura suture.

Synthesis and dynamic NMR study of ketenimines derived from tert-butyl isocyanide, alkyl 2-arylamino-2-oxo-acetates, and dialkyl acetylenedicarboxylates.

PubMed

Yavari, Issa; Nasiri, Farough; Djahaniani, Horieh

2004-01-01

The adduct produced in the reaction between tert-butyl isocyanide and dialkyl acetylenedicarboxylates was trapped by alkyl 2-arylamino-2-oxo-acetates. When the aryl group is 2-methyl-6-nitrophenyl or 2,6-di-isopropylphenyl, the product exists as two stable rotamers at room temperature as a result of restricted rotation around the Ar-N single bond. When the aryl group is 1-naphthyl or 8-quinolinyl, dynamic NMR effects are observed in the 1H NMR spectra. The calculated free-energy of activation for interconversion of the rotational isomers in 1-naphthyl and 8-quinolinyl derivatives amounts to about 99+/-2 and 68.5+/-2 kJ mol(-1), respectively.

Physical properties of ionic liquids consisting of the 1-butyl-3-methylimidazolium cation with various anions and the bis(trifluoromethylsulfonyl)imide anion with various cations.

PubMed

Jin, Hui; O'Hare, Bernie; Dong, Jing; Arzhantsev, Sergei; Baker, Gary A; Wishart, James F; Benesi, Alan J; Maroncelli, Mark

2008-01-10

Physical properties of 4 room-temperature ionic liquids consisting of the 1-butyl-3-methylimidazolium cation with various perfluorinated anions and the bis(trifluoromethylsulfonyl)imide (Tf2N-) anion with 12 pyrrolidinium-, ammonium-, and hydroxyl-containing cations are reported. Electronic structure methods are used to calculate properties related to the size, shape, and dipole moment of individual ions. Experimental measurements of phase-transition temperatures, densities, refractive indices, surface tensions, solvatochromic polarities based on absorption of Nile Red, 19F chemical shifts of the Tf2N- anion, temperature-dependent viscosities, conductivities, and cation diffusion coefficients are reported. Correlations among the measured quantities as well as the use of surface tension and molar volume for estimating Hildebrand solubility parameters of ionic liquids are also discussed.

REMOVAL OF METHYL T-BUTYL ETHER (MTBE) FROM WATER BY PERVAPORATION: BENCH-SCALE AND PILOT SCALE EVALUATIONS

EPA Science Inventory

The ability of pervaporation to remove methyl t-butyl ether (MTBE) from water was evaluated at bench- and pilot-scales. Process parameters studied included flow rate, temperature, MTBE concentration, membrane module type, and permeate pressure. Pervaporation performance was ass...

Work-Function and Surface Energy Tunable Cyanoacrylic Acid Small-Molecule Derivative Interlayer on Planar ZnO Nanorods for Improved Organic Photovoltaic Performance.

PubMed

Ambade, Swapnil B; Ambade, Rohan B; Bagde, Sushil S; Lee, Soo-Hyoung

2016-12-28

The issue of work-function and surface energy is fundamental to "decode" the critical inorganic/organic interface in hybrid organic photovoltaics, which influences important photovoltaic events like exciton dissociation, charge transfer, photocurrent (J sc ), open-circuit voltage (V oc ), etc. We demonstrate that by incorporating an interlayer of cyanoacrylic acid small molecular layer (SML) on solution-processed, spin-coated, planar ZnO nanorods (P-ZnO NRs), higher photovoltaic (PV) performances were achieved in both inverted organic photovoltaic (iOPV) and hybrid organic photovoltaic (HOPV) devices, where ZnO acts as an "electron-transporting layer" and as an "electron acceptor", respectively. For the tuned range of surface energy from 52.5 to 33 mN/m, the power conversion efficiency (PCE) in bulk heterojunction (BHJ) iOPVs based on poly(3-hexylthiophene) (P3HT) and phenyl-C 60 -butyric acid methyl ester (PC 60 BM) increases from 3.16% to 3.68%, and that based on poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5b']dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene)-2-carboxylate-2-6-diyl)] (PTB7:Th):[6,6]-phenyl C 71 butyric acid methyl ester (PC 71 BM) photoactive BHJ increases from 6.55% to 8.0%, respectively. The improved PV performance in iOPV devices is majorly attributed to enhanced photocurrents achieved as a result of reduced surface energy and greater electron affinity from the covalent attachment of the strong electron-withdrawing cyano moiety, while that in HOPV devices, where PCE increases from 0.21% to 0.79% for SML-modified devices, is ascribed to a large increase in V oc benefitted due to reduced work function effected from the presence of strong dipole moment in SML that points away from P-ZnO NRs.

Physiologically based pharmacokinetic model for ethyl tertiary-butyl ether and tertiary-butyl alcohol in rats: Contribution of binding to α2u-globulin in male rats and high-exposure nonlinear kinetics to toxicity and cancer outcomes.

PubMed

Borghoff, Susan J; Ring, Caroline; Banton, Marcy I; Leavens, Teresa L

2017-05-01

In cancer bioassays, inhalation, but not drinking water exposure to ethyl tertiary-butyl ether (ETBE), caused liver tumors in male rats, while tertiary-butyl alcohol (TBA), an ETBE metabolite, caused kidney tumors in male rats following exposure via drinking water. To understand the contribution of ETBE and TBA kinetics under varying exposure scenarios to these tumor responses, a physiologically based pharmacokinetic model was developed based on a previously published model for methyl tertiary-butyl ether, a structurally similar chemical, and verified against the literature and study report data. The model included ETBE and TBA binding to the male rat-specific protein α2u-globulin, which plays a role in the ETBE and TBA kidney response observed in male rats. Metabolism of ETBE and TBA was described as a single, saturable pathway in the liver. The model predicted similar kidney AUC 0-∞ for TBA for various exposure scenarios from ETBE and TBA cancer bioassays, supporting a male-rat-specific mode of action for TBA-induced kidney tumors. The model also predicted nonlinear kinetics at ETBE inhalation exposure concentrations above ~2000 ppm, based on blood AUC 0-∞ for ETBE and TBA. The shift from linear to nonlinear kinetics at exposure concentrations below the concentration associated with liver tumors in rats (5000 ppm) suggests the mode of action for liver tumors operates under nonlinear kinetics following chronic exposure and is not relevant for assessing human risk. Copyright © 2016 The Authors Journal of Applied Toxicology Published by John Wiley & Sons Ltd. Copyright © 2016 The Authors Journal of Applied Toxicology Published by John Wiley & Sons Ltd.

Effect of Polyhedral Oligomeric Silsesquioxane (POSS) Substituents on the Rheological Behavior in Butyl Methacrylate/POSS Copolymers

DTIC Science & Technology

2008-10-27

was repeated twice, dissolving the product in chloroform and diethyl ether, respectively. The polymer was dried at 60 °C under vacuum overnight...the Tg of the i Bu remains the same. Table 1. Tg for Butyl Methacrylate-co- Propyl Methacryl POSS Polymers with Various POSS Substituents