Methods to improve the PVD coatability of brass by using diffusion barriers

NASA Astrophysics Data System (ADS)

Langer, Bernd

Previous work involving PVD coatings on brass has used a combination of multilayers consisting of electroplated films like nickel or chromium and deposited decorative PVD coatings like TiN, TiAIN or ZrN systems. The disadvantages of these systems are the combination of wet electrochemistry and high tech vacuum processes. Furthermore the allergic reaction to nickel and the toxic nature of Cr(VI) must be considered.There is a need for intermediate layers to 'seal-off the brass in order to avoid the evaporation of zinc in vacuum using a diffusion barrier. Furthermore the intermediate layers are required to act as a corrosion barrier.This thesis reports on the development of PVD coatings on heat sensitive brass substrate materials utilising ABS technology with Al, CuAl8 and Nb targets as vapour sources.The brass pretreatment includes careful grinding, polishing and cleaning steps as well as steered arc metal ion etching using the above target materials. The coatings are produced at temperatures between 100 and 250°C in the unbalanced magnetron mode, including layers made from Al, Al-Nb, CuA18, CuAl8-Nb and Nb.Scratch adhesion and Rockwell indentation tests are found not to be directly applicable to the system of soft brass and ductile coating(s). Therefore a new classification for both scratch and indentation tests was defined. The best adhesion was shown by the CuA18 coatings on brass. Corrosion tests showed good results for the Al coatings and poor results for the pure Nb coatings directly applied on brass. The best corrosion result was obtained with a CuAl8-Nb layer system. This layer system also offers very good barrier behaviour concerning Zn diffusion.Other investigations like Glow Discharge Optical Emission Spectroscopy (GDOES), Scanning Electron Microscopy (SEM) imaging, Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD) were undertaken to characterise the new coating systems for brass.

Plasma Spray-Physical Vapor Deposition (PS-PVD) of Ceramics for Protective Coatings

NASA Technical Reports Server (NTRS)

Harder, Bryan J.; Zhu, Dongming

2011-01-01

In order to generate advanced multilayer thermal and environmental protection systems, a new deposition process is needed to bridge the gap between conventional plasma spray, which produces relatively thick coatings on the order of 125-250 microns, and conventional vapor phase processes such as electron beam physical vapor deposition (EB-PVD) which are limited by relatively slow deposition rates, high investment costs, and coating material vapor pressure requirements. The use of Plasma Spray - Physical Vapor Deposition (PS-PVD) processing fills this gap and allows thin (< 10 microns) single layers to be deposited and multilayer coatings of less than 100 microns to be generated with the flexibility to tailor microstructures by changing processing conditions. Coatings of yttria-stabilized zirconia (YSZ) were applied to NiCrAlY bond coated superalloy substrates using the PS-PVD coater at NASA Glenn Research Center. A design-of-experiments was used to examine the effects of process variables (Ar/He plasma gas ratio, the total plasma gas flow, and the torch current) on chamber pressure and torch power. Coating thickness, phase and microstructure were evaluated for each set of deposition conditions. Low chamber pressures and high power were shown to increase coating thickness and create columnar-like structures. Likewise, high chamber pressures and low power had lower growth rates, but resulted in flatter, more homogeneous layers

Woman and partner-perceived partner responses predict pain and sexual satisfaction in provoked vestibulodynia (PVD) couples.

PubMed

Rosen, Natalie O; Bergeron, Sophie; Leclerc, Bianca; Lambert, Bernard; Steben, Marc

2010-11-01

Provoked vestibulodynia (PVD) is a highly prevalent vulvovaginal pain condition that results in significant sexual dysfunction, psychological distress, and reduced quality of life. Although some intra-individual psychological factors have been associated with PVD, studies to date have neglected the interpersonal context of this condition. We examined whether partner responses to women's pain experience-from the perspective of both the woman and her partner-are associated with pain intensity, sexual function, and sexual satisfaction. One hundred ninety-one couples (M age for women=33.28, standard deviation [SD]=12.07, M age for men=35.79, SD=12.44) in which the woman suffered from PVD completed the spouse response scale of the Multidimensional Pain Inventory, assessing perceptions of partners' responses to the pain. Women with PVD also completed measures of pain, sexual function, sexual satisfaction, depression, and dyadic adjustment. Dependent measures were women's responses to: (i) a horizontal analog scale assessing the intensity of their pain during intercourse; (ii) the Female Sexual Function Index; and (iii) the Global Measure of Sexual Satisfaction Scale. Controlling for depression, higher solicitous partner responses were associated with higher levels of women's vulvovaginal pain intensity. This association was significant for partner-perceived responses (β=0.29, P<0.001) and for woman-perceived partner responses (β=0.16, P=0.04). After controlling for sexual function and dyadic adjustment, woman-perceived greater solicitous partner responses (β=0.16, P=0.02) predicted greater sexual satisfaction. Partner-perceived responses did not predict women's sexual satisfaction. Partner responses were not associated with women's sexual function. Findings support the integration of dyadic processes in the conceptualization and treatment of PVD by suggesting that partner responses to pain affect pain intensity and sexual satisfaction in affected women. © 2010

Prefabricated Vertical Drain (PVD) and Deep Cement Mixing (DCM)/Stiffened DCM (SDCM) techniques for soft ground improvement

NASA Astrophysics Data System (ADS)

Bergado, D. T.; Long, P. V.; Chaiyaput, S.; Balasubramaniam, A. S.

2018-04-01

Soft ground improvement techniques have become most practical and popular methods to increase soil strength, soil stiffness and reduce soil compressibility including the soft Bangkok clay. This paper focuses on comparative performances of prefabricated vertical drain (PVD) using surcharge, vacuum and heat preloading as well as the cement-admixed clay of Deep Cement Mixing (DCM) and Stiffened DCM (SDCM) methods. The Vacuum-PVD can increase the horizontal coefficient of consolidation, Ch, resulting in faster rate of settlement at the same magnitudes of settlement compared to Conventional PVD. Several field methods of applying vacuum preloading are also compared. Moreover, the Thermal PVD and Thermal Vacuum PVD can increase further the coefficient of horizontal consolidation, Ch, with the associated reduction of kh/ks values by reducing the drainage retardation effects in the smear zone around the PVD which resulted in faster rates of consolidation and higher magnitudes of settlements. Furthermore, the equivalent smear effect due to non-uniform consolidation is also discussed in addition to the smear due to the mechanical installation of PVDs. In addition, a new kind of reinforced deep mixing method, namely Stiffened Deep Cement Mixing (SDCM) pile is introduced to improve the flexural resistance, improve the field quality control, and prevent unexpected failures of the Deep Cement Mixing (DCM) pile. The SDCM pile consists of DCM pile reinforced with the insertion of precast reinforced concrete (RC) core. The full scale test embankment on soft clay improved by SDCM and DCM piles was also analysed. Numerical simulations using the 3D PLAXIS Foundation finite element software have been done to understand the behavior of SDCM and DCM piles. The simulation results indicated that the surface settlements decreased with increasing lengths of the RC cores, and, at lesser extent, increasing sectional areas of the RC cores in the SDCM piles. In addition, the lateral movements

Development of CVD-W coatings on CuCrZr and graphite substrates with a PVD intermediate layer

NASA Astrophysics Data System (ADS)

Song, Jiupeng; Lian, Youyun; Lv, Yanwei; Liu, Junyong; Yu, Yang; Liu, Xiang; Yan, Binyou; Chen, Zhigang; Zhuang, Zhigang; Zhao, Ximeng; Qi, Yang

2014-12-01

In order to apply tungsten (W) coatings by chemical vapor deposition (CVD) for repairing or updating the plasma facing components (PFCs) of the first wall and divertor in existing or future tokomaks, where CuCrZr or graphite is the substrate material, an intermediate layer by physical vapor deposition (PVD) has been used to accommodate the interface stress due to the mismatch of thermal expansion or act as a diffusion barrier between the CVD-W coating and the substrate. The prepared CuCrZr/PVD-Cu/CVD-W sample with active cooling has passed thermal fatigue tests by electron beam with an absorbed power of 2.2 MW/m2, 50 s on/50 s off, for 100 cycles. Another graphite/PVD-Si/CVD-W sample without active cooling underwent thermal fatigue testing with an absorbed power density of 4.62 MW/m2, 5 s on/25 s off, for 200 cycles, and no catastrophic failure was found.

Reducing virulence of the human pathogen Burkholderia by altering the substrate specificity of the quorum-quenching acylase PvdQ

PubMed Central

Koch, Gudrun; Nadal-Jimenez, Pol; Reis, Carlos R.; Muntendam, Remco; Bokhove, Marcel; Melillo, Elena; Dijkstra, Bauke W.; Cool, Robbert H.; Quax, Wim J.

2014-01-01

The use of enzymes to interfere with quorum sensing represents an attractive strategy to fight bacterial infections. We used PvdQ, an effective quorum-quenching enzyme from Pseudomonas aeruginosa, as a template to generate an acylase able to effectively hydrolyze C8-HSL, the major communication molecule produced by the Burkholderia species. We discovered that the combination of two single mutations leading to variant PvdQLα146W,Fβ24Y conferred high activity toward C8-HSL. Exogenous addition of PvdQLα146W,Fβ24Y dramatically decreased the amount of C8-HSL present in Burkholderia cenocepacia cultures and inhibited a quorum sensing-associated phenotype. The efficacy of this PvdQ variant to combat infections in vivo was further confirmed by its ability to rescue Galleria mellonella larvae upon infection, demonstrating its potential as an effective agent toward Burkholderia infections. Kinetic analysis of the enzymatic activities toward 3-oxo-C12-L-HSL and C8-L-HSL corroborated a substrate switch. This work demonstrates the effectiveness of quorum-quenching acylases as potential novel antimicrobial drugs. In addition, we demonstrate that their substrate range can be easily switched, thereby paving the way to selectively target only specific bacterial species inside a complex microbial community. PMID:24474783

PVD Silicon Carbide as a Thin Film Packaging Technology for Antennas on LCP Substrates for Harsh Environments

NASA Technical Reports Server (NTRS)

Scardelletti, Maximilian C.; Stanton, John W.; Ponchak, George E.; Jordan, Jennifer L.; Zorman, Christian A.

2010-01-01

This paper describes an effort to develop a thin film packaging technology for microfabricated planar antennas on polymeric substrates based on silicon carbide (SiC) films deposited by physical vapor deposition (PVD). The antennas are coplanar waveguide fed dual frequency folded slot antennas fabricated on liquid crystal polymer (LCP) substrates. The PVD SiC thin films were deposited directly onto the antennas by RF sputtering at room temperature at a chamber pressure of 30 mTorr and a power level of 300 W. The SiC film thickness is 450 nm. The return loss and radiation patterns were measured before and after the SiC-coated antennas were submerged into perchloric acid for 1 hour. No degradation in RF performance or physical integrity of the antenna was observed.

Effects of interface morphology and TGO thickness on residual stress of EB-PVD thermal barrier coatings

NASA Astrophysics Data System (ADS)

Chen, Jianwei; Zhao, Yang; Ma, Jian

2015-04-01

The residual stress of electron beam-physical vapor deposition (EB-PVD) thermal barrier coatings (TBC) is complex and difficult to be obtained. In this paper, the interface morphology of TBCs subjected to cyclic heating and cooling was observed by SEM. Based on the thermal elastic-plastic finite method, corresponding interface model of TBCs was established. The residual stress of EB-PVD TBCs with different interface morphologies and TGO thicknesses was calculated using the FE method without regard to the presence of cracks and defects. The result shows that the distribution of residual stress is significantly affected by the interface morphology, and the growth of TGO also has influence on the residual stress of TC and TGO.

Prediction of the properties of PVD/CVD coatings with the use of FEM analysis

NASA Astrophysics Data System (ADS)

Śliwa, Agata; Mikuła, Jarosław; Gołombek, Klaudiusz; Tański, Tomasz; Kwaśny, Waldemar; Bonek, Mirosław; Brytan, Zbigniew

2016-12-01

The aim of this paper is to present the results of the prediction of the properties of PVD/CVD coatings with the use of finite element method (FEM) analysis. The possibility of employing the FEM in the evaluation of stress distribution in multilayer Ti/Ti(C,N)/CrN, Ti/Ti(C,N)/(Ti,Al)N, Ti/(Ti,Si)N/(Ti,Si)N, and Ti/DLC/DLC coatings by taking into account their deposition conditions on magnesium alloys has been discussed in the paper. The difference in internal stresses in the zone between the coating and the substrate is caused by, first of all, the difference between the mechanical and thermal properties of the substrate and the coating, and also by the structural changes that occur in these materials during the fabrication process, especially during the cooling process following PVD and CVD treatment. The experimental values of stresses were determined based on X-ray diffraction patterns that correspond to the modelled values, which in turn can be used to confirm the correctness of the accepted mathematical model for testing the problem. An FEM model was established for the purpose of building a computer simulation of the internal stresses in the coatings. The accuracy of the FEM model was verified by comparing the results of the computer simulation of the stresses with experimental results. A computer simulation of the stresses was carried out in the ANSYS environment using the FEM method. Structure observations, chemical composition measurements, and mechanical property characterisations of the investigated materials has been carried out to give a background for the discussion of the results that were recorded during the modelling process.

Investigation of the Effect of Residual Stress Gradient on the Wear Behavior of PVD Thin Films

NASA Astrophysics Data System (ADS)

Tlili, B.; Nouveau, C.; Guillemot, G.; Besnard, A.; Barkaoui, A.

2018-02-01

The control of residual stresses has been seldom investigated in multilayer coatings dedicated to improvement of wear behavior. Here, we report the preparation and characterization of superposed structures composed of Cr, CrN and CrAlN layers. Nano-multilayers CrN/CrAlN and Cr/CrN/CrAlN were deposited by Physical Vapor Deposition (PVD) onto Si (100) and AISI4140 steel substrates. The Cr, CrN and CrAlN monolayers were developed with an innovative approach in PVD coatings technologies corresponding to deposition with different residual stresses levels. Composition and wear tracks morphologies of the coatings were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, atomic force microscopy, x-ray photoelectron spectroscopy, energy-dispersive x-ray spectroscopy, x-ray diffraction and 3D-surface analyzer. The mechanical properties (hardness, residual stresses and wear) were investigated by nanoindentation, interferometry and micro-tribometry (fretting-wear tests). Observations suggest that multilayer coatings are composed mostly of nanocrystalline. The residual stresses level in the films has practically affected all the physicochemical and mechanical properties as well as the wear behavior. Consequently, it is demonstrated that the coating containing moderate stresses has a better wear behavior compared to the coating developed with higher residual stresses. The friction contact between coated samples and alumina balls shows also a large variety of wear mechanisms. In particular, the abrasive wear of the coatings was a combination of plastic deformation, fine microcracking and microspallation. The application of these multilayers will be wood machining of green wood.

Tribological and Wear Performance of Nanocomposite PVD Hard Coatings Deposited on Aluminum Die Casting Tool

PubMed Central

Fox-Rabinovich, German; Locks Junior, Edinei; Stolf, Pietro; Matos Martins, Marcelo

2018-01-01

In the aluminum die casting process, erosion, corrosion, soldering, and die sticking have a significant influence on tool life and product quality. A number of coatings such as TiN, CrN, and (Cr,Al)N deposited by physical vapor deposition (PVD) have been employed to act as protective coatings due to their high hardness and chemical stability. In this study, the wear performance of two nanocomposite AlTiN and AlCrN coatings with different structures were evaluated. These coatings were deposited on aluminum die casting mold tool substrates (AISI H13 hot work steel) by PVD using pulsed cathodic arc evaporation, equipped with three lateral arc-rotating cathodes (LARC) and one central rotating cathode (CERC). The research was performed in two stages: in the first stage, the outlined coatings were characterized regarding their chemical composition, morphology, and structure using glow discharge optical emission spectroscopy (GDOES), scanning electron microscopy (SEM), and X-ray diffraction (XRD), respectively. Surface morphology and mechanical properties were evaluated by atomic force microscopy (AFM) and nanoindentation. The coating adhesion was studied using Mersedes test and scratch testing. During the second stage, industrial tests were carried out for coated die casting molds. In parallel, tribological tests were also performed in order to determine if a correlation between laboratory and industrial tests can be drawn. All of the results were compared with a benchmark monolayer AlCrN coating. The data obtained show that the best performance was achieved for the AlCrN/Si3N4 nanocomposite coating that displays an optimum combination of hardness, adhesion, soldering behavior, oxidation resistance, and stress state. These characteristics are essential for improving the die mold service life. Therefore, this coating emerges as a novelty to be used to protect aluminum die casting molds. PMID:29495620

Tribological and Wear Performance of Nanocomposite PVD Hard Coatings Deposited on Aluminum Die Casting Tool.

PubMed

Paiva, Jose Mario; Fox-Rabinovich, German; Locks Junior, Edinei; Stolf, Pietro; Seid Ahmed, Yassmin; Matos Martins, Marcelo; Bork, Carlos; Veldhuis, Stephen

2018-02-28

In the aluminum die casting process, erosion, corrosion, soldering, and die sticking have a significant influence on tool life and product quality. A number of coatings such as TiN, CrN, and (Cr,Al)N deposited by physical vapor deposition (PVD) have been employed to act as protective coatings due to their high hardness and chemical stability. In this study, the wear performance of two nanocomposite AlTiN and AlCrN coatings with different structures were evaluated. These coatings were deposited on aluminum die casting mold tool substrates (AISI H13 hot work steel) by PVD using pulsed cathodic arc evaporation, equipped with three lateral arc-rotating cathodes (LARC) and one central rotating cathode (CERC). The research was performed in two stages: in the first stage, the outlined coatings were characterized regarding their chemical composition, morphology, and structure using glow discharge optical emission spectroscopy (GDOES), scanning electron microscopy (SEM), and X-ray diffraction (XRD), respectively. Surface morphology and mechanical properties were evaluated by atomic force microscopy (AFM) and nanoindentation. The coating adhesion was studied using Mersedes test and scratch testing. During the second stage, industrial tests were carried out for coated die casting molds. In parallel, tribological tests were also performed in order to determine if a correlation between laboratory and industrial tests can be drawn. All of the results were compared with a benchmark monolayer AlCrN coating. The data obtained show that the best performance was achieved for the AlCrN/Si₃N₄ nanocomposite coating that displays an optimum combination of hardness, adhesion, soldering behavior, oxidation resistance, and stress state. These characteristics are essential for improving the die mold service life. Therefore, this coating emerges as a novelty to be used to protect aluminum die casting molds.

Relation of Thermal Conductivity with Process Induced Anisotropic Void Systems in EB-PVD PYSZ Thermal Barrier Coatings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renteria, A. Flores; Saruhan-Brings, B.; Ilavsky, J.

2008-03-03

Thermal barrier coatings (TBCs) deposited by Electron-beam physical deposition (EB-PVD) protect the turbine blades situated at the high pressure sector of the aircraft and stationary turbines. It is an important task to uphold low thermal conductivity in TBCs during long-term service at elevated temperatures. One of the most promising methods to fulfil this task is to optimize the properties of PYSZ-based TBC by tailoring its microstructure. Thermal conductivity of the EB-PVD produced PYSZ TBCs is influenced mainly by the size, shape, orientation and volume of the various types of porosity present in the coatings. These pores can be classified asmore » open (inter-columnar and between feather arms gaps) and closed (intra-columnar pores). Since such pores are located within the three-dimensionally deposited columns and enclose large differences in their sizes, shapes, distribution and anisotropy, the accessibility for their characterization is very complex and requires the use of sophisticated methods. In this work, three different EB-PVD TBC microstructures were manufactured by varying the process parameters, yielding various characteristics of their pores. The corresponding thermal conductivities in as-coated state and after ageing at 11000C/1h and 100h were measured via Laser Flash Analysis Method (LFA). The pore characteristics and their individual effect on the thermal conductivity are analysed by USAXS which is supported by subsequent modelling and LFA methods, respectively. Evident differences in the thermal conductivity values of each microstructure were found in as-coated and aged conditions. In summary, broader columns introduce higher values in thermal conductivity. In general, thermal conductivity increases after ageing for all three investigated microstructures, although those with initial smaller pore surface area show smaller changes.« less

Relation of thermal conductivity with process induced anisotropic void system in EB-PVD PYSZ thermal barrier coatings.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renteria, A. F.; Saruhan, B.; Ilavsky, J.

2007-01-01

Thermal barrier coatings (TBCs) deposited by Electron-beam physical deposition (EB-PVD) protect the turbine blades situated at the high pressure sector of the aircraft and stationary turbines. It is an important task to uphold low thermal conductivity in TBCs during long-term service at elevated temperatures. One of the most promising methods to fulfil this task is to optimize the properties of PYSZ-based ,TBC by tailoring its microstructure. Thermal conductivity of the EB-PVD produced PYSZ TBCs is influenced mainly by the size, shape, orientation and volume of the various types of porosity present in the coatings. These pores can be classified asmore » open (inter-columnar and between feather arms gaps) and closed (intra-columnar pores). Since such pores are located within the three-dimensionally deposited columns and enclose large differences in their sizes, shapes, distribution and anisotropy, the accessibility for their characterization is very complex and requires the use of sophisticated methods. In this work, three different EB-PVD TBC microstructures were manufactured by varying the process parameters, yielding various characteristics of their pores. The corresponding thermal conductivities in as-coated state and after ageing at 1100C/1h and 100h were measured via Laser Flash Analysis Method (LFA). The pore characteristics and their individual effect on the thermal conductivity are analysed by USAXS which is supported by subsequent modelling and LFA methods, respectively. Evident differences in the thermal conductivity values of each microstructure were found in as-coated and aged conditions. In summary, broader columns introduce higher values in thermal conductivity. In general, thermal conductivity increases after ageing for all three investigated microstructures, although those with initial smaller pore surface area show smaller changes.« less

Diffusion bonding of CMSX-4 to UDIMET 720 using PVD-coated interfaces and HIP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larker, R.; Ockborn, J.; Selling, B.

There is an increasing interest in development of manufacturing methods for Dual Property BLISKs (BLaded dISKs), consisting of creep resistant airfoils and fatigue resistant disks bonded together by a durable joint. Optimum heat treatments are, however, very different for creep resistant single crystal CMSX-4 and fatigue resistant polycrystalline Udimet 720 selected in this study, but fortunately the first aging treatment for CMSX-4 (1140 C, 2-6h, AC) is similar to the partial solution treatment of U 720 HS2 (1115 C, 4h, OQ). Based on this, diffusion bonding was performed by HIP at 1120 C and 200 MPa argon pressure for 4more » h, followed by cooling to 400 C. Subsequently, a shortened Udimet 720 HS2 two-step aging treatment was adopted by heating to 650 C for 6 h followed by cooling to 400 C, heating to 760 C for 2 h, and finally cooling to R.T. under remaining HIP pressure. Plasma etching followed by thin (80 nm) PVD coating with either nickel or titanium were used to clean and protect the polished surfaces before joining. The selection of coatings was governed by the possibility to reduce oxidized nickel by flushing with hydrogen at 330 C during evacuation of the HIP capsules, and by the large solubility of oxygen in titanium. Hot tensile testing was performed at 750 C on both joined and reference materials subjected to the modified heat treatment. Initially solution treated Udimet 720 and CMSX-4 comprised the reference materials. The testing showed that joints with Ni-PV coatings were almost as strong as Udimet 720 (although with very limited elongation), while the joints with Ti-PVD coatings were weaker.« less

PVD thermal barrier coating applications and process development for aircraft engines

NASA Astrophysics Data System (ADS)

Rigney, D. V.; Viguie, R.; Wortman, D. J.; Skelly, D. W.

1997-06-01

Thermal barrier coatings (TBCs) have been developed for application to aircraft engine components to improve service life in an increasingly hostile thermal environment. The choice of TBC type is related to the component, intended use, and economics. Selection of electron beam physical vapor deposition proc-essing for turbine blade is due in part to part size, surface finish requirements, thickness control needs, and hole closure issues. Process development of PVD TBCs has been carried out at several different sites, including GE Aircraft Engines (GEAE). The influence of processing variables on microstructure is dis-cussed, along with the GEAE development coater and initial experiences of pilot line operation.

Flexible free-standing TiO2/graphene/PVdF films as anode materials for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Ren, H. M.; Ding, Y. H.; Chang, F. H.; He, X.; Feng, J. Q.; Wang, C. F.; Jiang, Y.; Zhang, P.

2012-12-01

Graphene composites were prepared by hydrothermal method using titanium dioxide (TiO2) adsorbed graphene oxide (GO) sheets as precursors. Free-standing hybrid films for lithium-ion batteries were prepared by adding TiO2/graphene composites to the polyvinylidene fluoride (PVdF)/N-methyl-2-pyrrolidone (NMP) solution, followed by a solvent evaporation technique. These films were characterized by atomic force microscopy (AFM), X-ray diffraction (XRD), scanning electron microscopy (SEM) and various electrochemical techniques. Flexible films show an excellent cycling performance, which was attributed to the interconnected graphene conducting network, which depressed the increasing of electric resistance during the cycling.

TiO2 as conductivity enhancer in PVdF-HFP polymer electrolyte system

NASA Astrophysics Data System (ADS)

Bhattacharya, Shreya; Manojkumar Ubarhande, Radha; Usha Rani, M.; Shanker Babu, Ravi; Arunkumar, R.

2017-11-01

Composite polymer electrolytes were prepared by incorporating inorganic filler TiO2 into PVdF-HFP-PMMA-EC-LiClO4 system. The electrolyte films were prepared by solvent casting technique. The effect of inorganic filler on the conductivity of the blended polymer electrolyte was studied and it is found that there is a considerable increase in ionic conductivity 1.296 × 10-3 S/cm-1 on the addition of TiO2. X-ray diffraction (XRD) study elucidate the increase in amorphous nature of the polymer electrolyte. This tendency of the polymer electrolyte could be the reason behind the increase in ionic conductivity. Fourier transform infrared spectroscopy (FTIR) spectra show the occurrence of complexation and interaction among the components.

Synthesis and electrochemical properties of Ti-doped DLC films by a hybrid PVD/PECVD process

NASA Astrophysics Data System (ADS)

Jo, Yeong Ju; Zhang, Teng Fei; Son, Myoung Jun; Kim, Kwang Ho

2018-03-01

Low electrical conductivity and poor adhesion to metallic substrates are the main drawbacks of diamond-like carbon (DLC) films when used in electrode applications. In this study, Ti-doped DLC films with various Ti contents were synthesized on metal Ti substrates by a hybrid PVD/PECVD process, where PECVD was used for deposition of DLC films and PVD was used for Ti doping. The effects of the Ti doping ratio on the microstructure, adhesion strength, and electrical and electrochemical properties of the DLC films were systematically investigated. An increase in the Ti content led to increased surface roughness and a higher sp2/sp3 ratio of the Ti-DLC films. Ti atoms existed as amorphous-phase Ti carbide when the Ti doping ratio was less than 2.8 at.%, while the nanocrystalline TiC phase was formed in DLC films when the Ti doping ratio was exceeded 4.0 at.%. The adhesion strength, electrical resistivity, electrochemical activity and reversibility of the DLC films were greatly improved by Ti doping. The influence of Ti doping ratio on the electrical and electrochemical properties of the DLC films were also investigated and the best performance was obtained at a Ti content of 2.8 at.%.

Experimental and numerical investigations on the temperature distribution in PVD AlTiN coated and uncoated Al2O3/TiCN mixed ceramic cutting tools in hard turning of AISI 52100 steel

NASA Astrophysics Data System (ADS)

Sateesh Kumar, Ch; Patel, Saroj Kumar; Das, Anshuman

2018-03-01

Temperature generation in cutting tools is one of the major causes of tool failure especially during hard machining where machining forces are quite high resulting in elevated temperatures. Thus, the present work investigates the temperature generation during hard machining of AISI 52100 steel (62 HRC hardness) with uncoated and PVD AlTiN coated Al2O3/TiCN mixed ceramic cutting tools. The experiments were performed on a heavy duty lathe machine with both coated and uncoated cutting tools under dry cutting environment. The temperature of the cutting zone was measured using an infrared thermometer and a finite element model has been adopted to predict the temperature distribution in cutting tools during machining for comparative assessment with the measured temperature. The experimental and numerical results revealed a significant reduction of cutting zone temperature during machining with PVD AlTiN coated cutting tools when compared to uncoated cutting tools during each experimental run. The main reason for decrease in temperature for AlTiN coated tools is the lower coefficient of friction offered by the coating material which allows the free flow of the chips on the rake surface when compared with uncoated cutting tools. Further, the superior wear behaviour of AlTiN coating resulted in reduction of cutting temperature.

Biophysical characterization of soluble Pseudomonas syringae ice nucleation protein InaZ fragments.

PubMed

Han, Yu Jin; Song, HyoJin; Lee, Chang Woo; Ly, Nguyễn Hoàng; Joo, Sang-Woo; Lee, Jun Hyuck; Kim, Soon-Jong; Park, SangYoun

2017-01-01

Ice nucleation protein (INP) with its functional domain consisting of multiple 48-residue repeat units effectively induces super-cooled water into ice. Circular dichroism and infrared deconvolution analyses on a soluble 240-residue fragment of Pseudomonas syringae InaZ (InaZ240) containing five 48-residue repeat units indicated that it is mostly composed of β-sheet and random coil. Analytical ultracentrifugation suggested that InaZ240 behaves as a monomer of an elongated ellipsoid. However, InaZ240 showed only minimum ice binding compared to anti-freeze proteins. Other P. syringae InaZ proteins with more 48-residue repeat units were made, in which the largest soluble fragment obtainable was an InaZ with twelve 48-residue repeat units. Size-exclusion chromatography analyses further suggested that the overall shape of the expressed InaZ fragments is pH-dependent, which becomes compact as the numbers of 48-residue repeat unit increase. Copyright © 2016 Elsevier B.V. All rights reserved.

Injection moulding of optical functional micro structures using laser structured, PVD-coated mould inserts

NASA Astrophysics Data System (ADS)

Hopmann, Ch.; Weber, M.; Schöngart, M.; Schäfer, C.; Bobzin, K.; Bagcivan, N.; Brögelmann, T.; Theiß, S.; Münstermann, T.; Steger, M.

2015-05-01

Micro structured optical plastics components are intensively used i. e. in consumer electronics, for optical sensors in metrology, innovative LED-lighting or laser technology. Injection moulding has proven to be successful for the large-scale production of those parts. However, the production of those parts still causes difficulties due to challenges in the moulding and demoulding of plastics parts created with laser structured mould inserts. A complete moulding of the structures often leads to increased demoulding forces, which then cause a breaking of the structures and a clogging of the mould. An innovative approach is to combine PVD-coated (physical vapour deposition), laser structured inserts and a variothermal moulding process to create functional mic8iüro structures in a one-step process. Therefore, a PVD-coating is applied after the laser structuring process in order to improve the wear resistance and the anti-adhesive properties against the plastics melt. In a series of moulding trials with polycarbonate (PC) and polymethylmethacrylate (PMMA) using different coated moulds, the mould temperature during injection was varied in the range of the glass transition and the melt temperature of the polymers. Subsequently, the surface topography of the moulded parts is evaluated by digital 3D laser-scanning microscopy. The influence of the moulding parameters and the coating of the mould insert on the moulding accuracy and the demoulding behaviour are being analysed. It is shown that micro structures created by ultra-short pulse laser ablation can be successfully replicated in a variothermal moulding process. Due to the mould coating, significant improvements could be achieved in producing micro structured optical plastics components.

Morphology and inhibition performance of Ag thin film as antimicrobial coating deposited by RF-PVD on 316 L stainless steel

NASA Astrophysics Data System (ADS)

Purniawan, A.; Khrisna, Y. S. A.; Rasyida, A.; Atmono, T. M.

2018-04-01

Foreign body related infection (FBRIs) is caused by forming biofilm of bacterial colony of medical equipment surfaces. In many cases, the FBRIs is still happened on the surface after medical sterilization process has been performed. In order to avoid the case, surface modification by antimicrobial coating was used. In this work, we present silver (Ag) thin film on 316 L stainless steel substrate surface was deposited using Radio Frequency Sputtering PVD (RF-PVD). The morphology of Ag thin film were characterized using SEM-EDX. Surface roughness of the thin film was measured by AFM. In addition, Kirby Bauer Test in Escherichia coli (E. coli) was conducted in order to evaluate the inhibition performance of the Ag thin film antimicrobial coating. Based on SEM and AFM results show that the particle size is increased from 523 nm to 708 nm and surface roughness from 9 to 20 nm for deposition time 10 minutes to 20 minutes, respectively. In addition, the inhibition layer of the coating is about 29 mm.

In Situ Ramp Anneal X-ray Diffraction Study of Atomic Layer Deposited Ultrathin TaN and Ta 1-x Al x N y Films for Cu Diffusion Barrier Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Consiglio, S.; Dey, S.; Yu, K.

2016-01-01

Ultrathin TaN and Ta 1-xAl xN y films with x = 0.21 to 0.88 were deposited by atomic layer deposition (ALD) and evaluated for Cu diffusion barrier effectiveness compared to physical vapor deposition (PVD) grown TaN. Cu diffusion barrier effectiveness was investigated using in-situ ramp anneal synchrotron X-ray diffraction (XRD) on Cu/1.8 nm barrier/Si stacks. A Kissinger-like analysis was used to assess the kinetics of Cu 3Si formation and determine the effective activation energy (E a) for Cu silicidation. Compared to the stack with a PVD TaN barrier, the stacks with the ALD films exhibited a higher crystallization temperature (Tmore » c) for Cu silicidation. The Ea values of Cu 3Si formation for stacks with the ALD films were close to the reported value for grain boundary diffusion of Cu whereas the Ea of Cu 3Si formation for the stack with PVD TaN is closer to the reported value for lattice diffusion. For 3 nm films, grazing incidence in-plane XRD showed evidence of nanocrystallites in an amorphous matrix with broad peaks corresponding to high density cubic phase for the ALD grown films and lower density hexagonal phase for the PVD grown film further elucidating the difference in initial failure mechanisms due to differences in barrier crystallinity and associated phase.« less

Integrated arc suppression unit for defect reduction in PVD applications

NASA Astrophysics Data System (ADS)

Li, Jason; Narasimhan, Murali K.; Pavate, Vikram; Loo, David; Rosenblum, Steve; Trubell, Larry; Scholl, Richard; Seamons, Scott; Hagerty, Chris; Ramaswami, Sesh

1997-09-01

Arcing between the target and plasma during PVD deposition causes substantial damage to the target and splats and other contamination on the deposited films. Arc-related damages and defects are frequently encountered in microelectronics manufacturing and contributes largely to reduced wafer yields. Arcing is caused largely by the charge buildup at the contaminated sites on the target surface that contains either nonconducting inclusions or nodules. Arc suppression is a key issue for defect reduction, yield improvement and for reliable high quality metallization. An Integrated Arc Suppression Unit (IASU) has been designed for Endura HP PVDTM sputtering sources. The integrated design reduces cable length from unit to source and reduces electrical energy stored in the cable. Active arc handling mode, proactive arc prevention mode, and passive by-pass arc counting mode are incorporated into the same unit. The active mode is designed to quickly respond to chamber conditions, like a large chamber voltage drop, that signals a arc. The self run mode is designed to proactively prevent arc formation by pulsing and reversing target voltage at 50 kHz. The design of the IASU, also called mini small package arc repression circuit--low energy unit (mini Sparc-le), has been optimized for various DC magnetron sources, plasma stability, chamber impedance, power matching, CE MARK test, and power dissipation. Process characterization with Ti, TiN and Al sputtering indicates that the unit has little adverse impact on film properties. Mini Sparc-le unit has been shown here to significantly reduce splats occurrence in Al sputtering. Marathon test of the unit with Ti/TiN test demonstrated the unit's reliability and its ability to reduce sensitivity of defects to target characteristics.

Cd doping at PVD-CdS/CuInGaSe 2 heterojunctions

DOE PAGES

He, Xiaoqing; Paulauskas, Tadas; Ercius, Peter; ...

2017-02-20

In this paper, we report on direct evidence of Cd doping of the CuInGaSe 2 (CIGS) surface in physical vapor deposited (PVD) CdS/CIGS heterojunctions by scanning transmission electron microscopy (STEM) and related techniques. We find Cd doping of the CIGS near-surface region regardless of the presence or absence of Cu rich domains in the CdS for both zinc-blende (zb) and wurtzite (wz) CdS. However, we find that the Cd penetrates much farther into the CIGS when Cu-rich domains are present in the CdS. This suggests that Cu exchanges with Cd, increasing the concentration gradient for Cd in the CIGS andmore » thus driving Cd into the CIGS surface. The Cd doping is clearly resolved at atomic resolution in aberration-corrected STEM-high angle annular dark field images. In zb-CdS/CIGS heterojunctions, Cd is shown to substitute for both Cu and Ga atoms, while in wz-CdS/CIGS heterojunctions Cd seems to predominantly occupy Cu sites. Finally, Cd doping in the CIGS surface layer suggests the formation of a p-n homojunction in the CIGS, which may account for the high device efficiencies, comparable to CBD-CdS/CIGS processed structures.« less

Advanced process control and novel test methods for PVD silicon and elastomeric silicone coatings utilized on ion implant disks, heatsinks and selected platens

DOE Office of Scientific and Technical Information (OSTI.GOV)

Springer, J.; Allen, B.; Wriggins, W.

Coatings play multiple key roles in the proper functioning of mature and current ion implanters. Batch and serial implanters require strategic control of elemental and particulate contamination which often includes scrutiny of the silicon surface coatings encountering direct beam contact. Elastomeric Silicone Coatings must accommodate wafer loading and unloading as well as direct backside contact during implant plus must maintain rigid elemental and particulate specifications. The semiconductor industry has had a significant and continuous effort to obtain ultra-pure silicon coatings with sustained process performance and long life. Low particles and reduced elemental levels for silicon coatings are a major requirementmore » for process engineers, OEM manufacturers, and second source suppliers. Relevant data will be presented. Some emphasis and detail will be placed on the structure and characteristics of a relatively new PVD Silicon Coating process that is very dense and homogeneous. Wear rate under typical ion beam test conditions will be discussed. The PVD Silicon Coating that will be presented here is used on disk shields, wafer handling fingers/fences, exclusion zones of heat sinks, beam dumps and other beamline components. Older, legacy implanters can now provide extended process capability using this new generation PVD silicon - even on implanter systems that were shipped long before the advent of silicon coating for contamination control. Low particles and reduced elemental levels are critical performance criteria for the silicone elastomers used on disk heatsinks and serial implanter platens. Novel evaluation techniques and custom engineered tools are used to investigate the surface interaction characteristics of multiple Elastomeric Silicone Coatings currently in use by the industry - specifically, friction and perpendicular stiction. These parameters are presented as methods to investigate the critical wafer load and unload function. Unique tools and

Advanced process control and novel test methods for PVD silicon and elastomeric silicone coatings utilized on ion implant disks, heatsinks and selected platens

NASA Astrophysics Data System (ADS)

Springer, J.; Allen, B.; Wriggins, W.; Kuzbyt, R.; Sinclair, R.

2012-11-01

Coatings play multiple key roles in the proper functioning of mature and current ion implanters. Batch and serial implanters require strategic control of elemental and particulate contamination which often includes scrutiny of the silicon surface coatings encountering direct beam contact. Elastomeric Silicone Coatings must accommodate wafer loading and unloading as well as direct backside contact during implant plus must maintain rigid elemental and particulate specifications. The semiconductor industry has had a significant and continuous effort to obtain ultra-pure silicon coatings with sustained process performance and long life. Low particles and reduced elemental levels for silicon coatings are a major requirement for process engineers, OEM manufacturers, and second source suppliers. Relevant data will be presented. Some emphasis and detail will be placed on the structure and characteristics of a relatively new PVD Silicon Coating process that is very dense and homogeneous. Wear rate under typical ion beam test conditions will be discussed. The PVD Silicon Coating that will be presented here is used on disk shields, wafer handling fingers/fences, exclusion zones of heat sinks, beam dumps and other beamline components. Older, legacy implanters can now provide extended process capability using this new generation PVD silicon - even on implanter systems that were shipped long before the advent of silicon coating for contamination control. Low particles and reduced elemental levels are critical performance criteria for the silicone elastomers used on disk heatsinks and serial implanter platens. Novel evaluation techniques and custom engineered tools are used to investigate the surface interaction characteristics of multiple Elastomeric Silicone Coatings currently in use by the industry - specifically, friction and perpendicular stiction. These parameters are presented as methods to investigate the critical wafer load and unload function. Unique tools and test

Improved performance of GaN based light emitting diodes with ex-situ sputtered AlN nucleation layers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Shuo-Wei; Epistar Corporation, Hsinchu 300, Taiwan; Li, Heng

The crystal quality, electrical and optical properties of GaN based light emitting diodes (LEDs) with ex-situ sputtered physical vapor deposition (PVD) aluminum nitride (AlN) nucleation layers were investigated. It was found that the crystal quality in terms of defect density and x-ray diffraction linewidth was greatly improved in comparison to LEDs with in-situ low temperature GaN nucleation layer. The light output power was 3.7% increased and the reverse bias voltage of leakage current was twice on LEDs with ex-situ PVD AlN nucleation layers. However, larger compressive strain was discovered in LEDs with ex-situ PVD AlN nucleation layers. The study showsmore » the potential and constrain in applying ex-situ PVD AlN nucleation layers to fabricate high quality GaN crystals in various optoelectronics.« less

Effects of exogenous pyoverdines on Fe availability and their impacts on Mn(II) oxidation by Pseudomonas putida GB-1

PubMed Central

Lee, Sung-Woo; Parker, Dorothy L.; Geszvain, Kati; Tebo, Bradley M.

2014-01-01

Pseudomonas putida GB-1 is a Mn(II)-oxidizing bacterium that produces pyoverdine-type siderophores (PVDs), which facilitate the uptake of Fe(III) but also influence MnO2 formation. Recently, a non-ribosomal peptide synthetase mutant that does not synthesize PVD was described. Here we identified a gene encoding the PVDGB-1 (PVD produced by strain GB-1) uptake receptor (PputGB1_4082) of strain GB-1 and confirmed its function by in-frame mutagenesis. Growth and other physiological responses of these two mutants and of wild type were compared during cultivation in the presence of three chemically distinct sets of PVDs (siderotypes n°1, n°2, and n°4) derived from various pseudomonads. Under iron-limiting conditions, Fe(III) complexes of various siderotype n°1 PVDs (including PVDGB-1) allowed growth of wild type and the synthetase mutant, but not the receptor mutant, confirming that iron uptake with any tested siderotype n°1 PVD depended on PputGB1_4082. Fe(III) complexes of a siderotype n°2 PVD were not utilized by any strain and strongly induced PVD synthesis. In contrast, Fe(III) complexes of siderotype n°4 PVDs promoted the growth of all three strains and did not induce PVD synthesis by the wild type, implying these complexes were utilized for iron uptake independent of PputGB1_4082. These differing properties of the three PVD types provided a way to differentiate between effects on MnO2 formation that resulted from iron limitation and others that required participation of the PVDGB-1 receptor. Specifically, MnO2 production was inhibited by siderotype n°1 but not n°4 PVDs indicating PVD synthesis or PputGB1_4082 involvement rather than iron-limitation caused the inhibition. In contrast, iron limitation was sufficient to explain the inhibition of Mn(II) oxidation by siderotype n°2 PVDs. Collectively, our results provide insight into how competition for iron via siderophores influences growth, iron nutrition and MnO2 formation in more complex environmental

Are primary and secondary provoked vestibulodynia two different entities? A comparison of pain, psychosocial, and sexual characteristics.

PubMed

Aerts, Leen; Bergeron, Sophie; Corsini-Munt, Serena; Steben, Marc; Pâquet, Myriam

2015-06-01

Provoked vestibulodynia (PVD) is suspected to be the most frequent cause of vulvodynia in premenopausal women. Based on the onset of PVD relative to the start of sexual experience, PVD can be divided into primary (PVD1) and secondary PVD (PVD2). Studies comparing these PVD subgroups are inconclusive as to whether differences exist in sexual and psychosocial functioning. The aim of this study was to compare the pain, sexual and psychosocial functioning of a large clinical and community-based sample of premenopausal women with PVD1 and PVD2. A total of 269 women (n = 94 PVD1; n = 175 PVD2) completed measures on sociodemographics, pain, sexual, and psychosocial functioning. Dependent variables were the 0-10 pain numerical rating scale, McGill-Melzack Pain Questionnaire, Female Sexual Function Index, Global Measure of Sexual Satisfaction, Beck Depression Inventory-II, Painful Intercourse Self-Efficacy Scale, Pain Catastrophizing Scale, State-Trait Anxiety Inventory Trait Subscale, Ambivalence over Emotional Expression Questionnaire, Hurlbert Index of Sexual Assertiveness, Experiences in Close Relationships Scale--Revised, and Dyadic Adjustment Scale-Revised. At first sexual relationship, women with PVD2 were significantly younger than women with PVD1 (P < 0.01). The average relationship duration was significantly longer in women with PVD2 compared with women with PVD1 (P < 0.01). Although women with PVD1 described a significantly longer duration of pain compared with women with PVD2 (P < 0.01), no significant subtype differences were found in pain intensity during intercourse. When controlling for the sociodemographics mentioned earlier, no significant differences were found in sexual, psychological, and relational functioning between the PVD subgroups. Nevertheless, on average, both groups were in the clinical range of sexual dysfunction and reported impaired psychological functioning. The findings show that there are no significant differences in the sexual and

Secondary provoked vestibulodynia in sexually active women with uncomplicated recurrent urinary tract infections.

PubMed

Salonia, Andrea; Clementi, Maria Chiara; Graziottin, Alessandra; Nappi, Rossella E; Castiglione, Fabio; Ferrari, Matteo; Capitanio, Umberto; Damiano, Rocco; Montorsi, Francesco

2013-09-01

Uncomplicated recurrent urinary tract infections (rUTIs) associated with uropathogenic Escherichia coli (UPEC) are common among healthy, reproductive-aged women. Provoked vestibulodynia (PVD) is a major reason of sexual pain in premenopausal women. The aim of this paper is to assess prevalence and predictors of secondary PVD in a cohort of Caucasian-European, heterosexual, sexually active, reproductive-aged women seeking medical help for rUTIs as their primary complaint. Clinical and psychometric variables for 60 consecutive patients with rUTIs were considered. Patients were assessed with a thorough medical and sexual history, a number of psychometric instruments, and a specific physical examination. Urinalysis and self-collected urine cultures from the previous 12 months were also examined. Descriptive statistics and logistic regression models were used to test the associations between secondary PVD and sociodemographic and clinical variables. Mean age was 34.2 years (median 33 years; range 21-42). Secondary PVD was found in 36 of 60 patients (60%). Women with PVD had a higher prevalence of urinary tract infections (UTIs) over the previous 12 months (χ(2) : 4.54; P = 0.03) and suffered more frequently from UPEC-related rUTIs (χ(2) : 5.92; P = 0.01) than those without PVD. Moreover, women with PVD showed significantly lower scores on Female Sexual Function Index domains (all P ≤ 0.01), as compared with PVD-negative women. UPEC-related rUTIs (odds ratio [OR]: 3.1; P = 0.01), six or more UTIs over the previous 12 months (OR: 2.8; P = 0.01), and treatment with three or more antibiotics throughout the same period (OR: 2.1; P = 0.04) emerged as independent predictors of PVD. Three of five Caucasian-European, heterosexual, sexually active women of reproductive age complaining of rUTIs as their primary disorder also suffer from secondary PVD. Uncomplicated UPEC-related rUTIs are more frequently associated with secondary PVD than are UTIs caused

Investigation of failure mechanism of thermal barrier coatings (TBCs) deposited by EB-PVD technique

NASA Astrophysics Data System (ADS)

Shahid, M. R.; Abbas, Musharaf

2013-06-01

Failure mechanism of thermal barrier coatings (TBCs) prepared by electron beam physical vapor deposition (EB-PVD) technique owing to formation of micro cracks was investigated. The TBCs were deposited on the Ni-based super alloy IN-100 and the micro cracks were observed within the top ceramic coat of thermally cycled TBCs at 1050°C. It was observed that these cracks propagate in the ceramic coat in the direction normal to interface while no cracks were observed in the bond coat. SEM/EDS studies revealed that some non-uniform oxides were formed on the interface between ceramic top and metallic bond coat just below the cracks. Study proposed that the cracks were initiated due to stress owing to big difference in Pilling-Bed worth ratio of non-uniform oxides as well as thermal stress, which caused the formation of cracks in top ceramic coat leading to failure of TBCs

Crack prediction in EB-PVD thermal barrier coatings based on the simulation of residual stresses

NASA Astrophysics Data System (ADS)

Chen, J. W.; Zhao, Y.; Liu, S.; Zhang, Z. Z.; Ma, J.

2016-07-01

Thermal barrier coatings systems (TBCs) are widely used in the field of aerospace. The durability and insulating ability of TBCs are highly dependent on the residual stresses of top coatings, thus the investigation of the residual stresses is helpful to understand the failure mechanisms of TBCs. The simulation of residual stresses evolution in electron beam physical vapor deposition (EB-PVD) TBCs is described in this work. The interface morphology of TBCs subjected to cyclic heating and cooling is observed using scanning electron microscope (SEM). An interface model of TBCs is established based on thermal elastic-plastic finite method. Residual stress distributions in TBCs are obtained to reflect the influence of interfacial roughness. Both experimental and simulation results show that it is feasible to predict the crack location by stress analysis, which is crucial to failure prediction.

Mg Content Dependence of EML-PVD Zn-Mg Coating Adhesion on Steel Strip

NASA Astrophysics Data System (ADS)

Jung, Woo Sung; Lee, Chang Wook; Kim, Tae Yeob; De Cooman, Bruno C.

2016-09-01

The effect of coating thickness and Mg concentration on the adhesion strength of electromagnetic levitation physical vapor deposited Zn-Mg alloy coatings on steel strip was investigated. The phase fraction of Zn, Mg2Zn11, and MgZn2 was determined for a coating Mg concentration in the 0 to 15 wt pct range. Coatings with a Mg content less than 5 pct consisted of an Zn and Mg2Zn11 phase mixture. The coatings showed good adhesion strength and ductile fracture behavior. Coatings with a higher Mg concentration, which consisted of a Mg2Zn11 and MgZn2 phase mixture, had a poor adhesion strength and a brittle fracture behavior. The adhesion strength of PVD Zn-Mg alloy coatings was found to be related to the pure Zn phase fraction. The effect of coating thickness on adhesion strength was found to be negligible. The microstructure of the interface between steel and Zn-Mg alloy coatings was investigated in detail by electron microscopy, electron diffraction, and atom probe tomography.

Electrical and dielectric properties of PVdF-HFP - PMMA - (PC + DEC)- LiClO4 based gel polymer electrolyte

NASA Astrophysics Data System (ADS)

Gohel, Khushbu; Kanchan, D. K.; Maheshwaran, C.

2018-04-01

In the present paper, AC impedance studies have been measured to evaluate ion conduction behavior of (PVdF-HFP - PMMA) + (PC-DEC) + LiClO4 gel polymer electrolyte system prepared by solution casting method. Structural characterization and morphology has been carried out using XRD and SEM respectively. The AC conductivity and dielectric permittivity, electric modulus and relaxation mechanism have been studied. The variation of ac conductivity with frequency obeys Jonscher power law. Maximum value of dielectric constant ɛ' in the lower frequency region has been observed for the gel polymer electrolyte containing 7.5 wt% LiClO4. The highest conducting sample shows the shortest relaxation time.

Studies on the effect of dispersoid(ZrO2) in PVdF-co-HFP based gel polymer electrolytes

NASA Astrophysics Data System (ADS)

Sivakumar, M.; Subadevi, R.; Muthupradeepa, R.

2013-06-01

Gel polymer electrolytes containing poly(vinylidenefluoride-co-hexafluoropropylene) (P(VdF-co-HFP)) / Lithium bis(trifluoromethane sulfon)imide (LiTFSI) / mixture of ethylene carbonate and propylene carbonate (EC+PC) with different concendration of ZrO2 has been prepared using the solution casting technique. The conductivity of the prepared electrolyte sample has been determined by AC impedance technique in the range 303-353K. The temperature dependent ionic conductivity plot seems to obey VTF relation. The maximum ionic conductivity value of 4.46 × 10-3S/cm has been obtained for PVdF-co-HFP(32%) - LiTFSI(8%) - EC+PC (60%) + ZrO2(6wt%) based polymer electrolyte. The surface morphology of the prepared electrolyte sample has been studied using SEM.

Evaluation of Osseous Integration of PVD-Silver-Coated Hip Prostheses in a Canine Model

PubMed Central

Hauschild, Gregor; Hardes, Jendrik; Gosheger, Georg; Blaske, Franziska; Wehe, Christoph; Karst, Uwe; Höll, Steffen

2015-01-01

Infection associated with biomaterials used for orthopedic prostheses remains a serious complication in orthopedics, especially tumor surgery. Silver-coating of orthopedic (mega)prostheses proved its efficiency in reducing infections but has been limited to surface areas exposed to soft tissues due to concerns of silver inhibiting osseous integration of cementless stems. To close this gap in the bactericidal capacity of silver-coated orthopedic prostheses extension of the silver-coating on surface areas intended for osseous integration seems to be inevitable. Our study reports about a PVD- (physical-vapor-deposition-) silver-coated cementless stem in a canine model for the first time and showed osseous integration of a silver-coated titanium surface in vivo. Radiological, histological, and biomechanical analysis revealed a stable osseous integration of four of nine stems implanted. Silver trace elemental concentrations in serum did not exceed 1.82 parts per billion (ppb) and can be considered as nontoxic. Changes in liver and kidney functions associated with the silver-coating could be excluded by blood chemistry analysis. This was in accordance with very limited metal displacement from coated surfaces observed by laser ablation inductively coupled plasma-mass spectrometry (LA-ICP-MS) 12 months after implantation. In conclusion our results represent a step towards complete bactericidal silver-coating of orthopedic prostheses. PMID:25695057

Optogenetic analysis of a nociceptor neuron and network reveals ion channels acting downstream of primary sensors.

PubMed

Husson, Steven J; Costa, Wagner Steuer; Wabnig, Sebastian; Stirman, Jeffrey N; Watson, Joseph D; Spencer, W Clay; Akerboom, Jasper; Looger, Loren L; Treinin, Millet; Miller, David M; Lu, Hang; Gottschalk, Alexander

2012-05-08

Nociception generally evokes rapid withdrawal behavior in order to protect the tissue from harmful insults. Most nociceptive neurons responding to mechanical insults display highly branched dendrites, an anatomy shared by Caenorhabditis elegans FLP and PVD neurons, which mediate harsh touch responses. Although several primary molecular nociceptive sensors have been characterized, less is known about modulation and amplification of noxious signals within nociceptor neurons. First, we analyzed the FLP/PVD network by optogenetics and studied integration of signals from these cells in downstream interneurons. Second, we investigated which genes modulate PVD function, based on prior single-neuron mRNA profiling of PVD. Selectively photoactivating PVD, FLP, and downstream interneurons via Channelrhodopsin-2 (ChR2) enabled the functional dissection of this nociceptive network, without interfering signals by other mechanoreceptors. Forward or reverse escape behaviors were determined by PVD and FLP, via integration by command interneurons. To identify mediators of PVD function, acting downstream of primary nocisensor molecules, we knocked down PVD-specific transcripts by RNAi and quantified light-evoked PVD-dependent behavior. Cell-specific disruption of synaptobrevin or voltage-gated Ca(2+) channels (VGCCs) showed that PVD signals chemically to command interneurons. Knocking down the DEG/ENaC channel ASIC-1 and the TRPM channel GTL-1 indicated that ASIC-1 may extend PVD's dynamic range and that GTL-1 may amplify its signals. These channels act cell autonomously in PVD, downstream of primary mechanosensory molecules. Our work implicates TRPM channels in modifying excitability of and DEG/ENaCs in potentiating signal output from a mechano-nociceptor neuron. ASIC-1 and GTL-1 homologs, if functionally conserved, may denote valid targets for novel analgesics. Copyright © 2012 Elsevier Ltd. All rights reserved.

Clinical trials in peripheral vascular disease: pipeline and trial designs: an evaluation of the ClinicalTrials.gov database.

PubMed

Subherwal, Sumeet; Patel, Manesh R; Chiswell, Karen; Tidemann-Miller, Beth A; Jones, W Schuyler; Conte, Michael S; White, Christopher J; Bhatt, Deepak L; Laird, John R; Hiatt, William R; Tasneem, Asba; Califf, Robert M

2014-11-11

Tremendous advances have occurred in therapies for peripheral vascular disease (PVD); until recently, however, it has not been possible to examine the entire clinical trial portfolio of studies for the treatment of PVD (both arterial and venous disease). We examined interventional trials registered in ClinicalTrials.gov from October 2007 through September 2010 (n=40,970) and identified 676 (1.7%) PVD trials (n=493 arterial only, n=170 venous only, n=13 both arterial and venous). Most arterial studies investigated lower-extremity peripheral artery disease and acute stroke (35% and 24%, respectively), whereas most venous studies examined deep vein thrombosis/pulmonary embolus prevention (42%) or venous ulceration (25%). A placebo-controlled trial design was used in 27% of the PVD trials, and 4% of the PVD trials excluded patients >65 years of age. Enrollment in at least 1 US site decreased from 51% of trials in 2007 to 41% in 2010. Compared with noncardiology disciplines, PVD trials were more likely to be double-blinded, to investigate the use of devices and procedures, and to have industry sponsorship and assumed funding source, and they were less likely to investigate drug and behavioral therapies. Geographic access to PVD clinical trials within the United States is limited to primarily large metropolitan areas. PVD studies represent a small group of trials registered in ClinicalTrials.gov, despite the high prevalence of vascular disease in the general population. This low number, compounded by the decreasing number of PVD trials in the United States, is concerning and may limit the ability to inform current clinical practice of patients with PVD. © 2014 American Heart Association, Inc.

Low pressure hand made PVD system for high crystalline metal thin film preparation in micro-nanometer scale

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosikhin, Ahmad, E-mail: a.rosikhin86@yahoo.co.id; Hidayat, Aulia Fikri; Marimpul, Rinaldo

High crystalline metal thin film preparation in application both for catalyst substrate or electrode in any electronic devices always to be considered in material functional material research and development. As a substrate catalyst, this metal take a role as guidance for material growth in order to resulted in proper surface structure although at the end it will be removed via etching process. Meanwhile as electrodes, it will dragging charges to be collected inside. This brief discussion will elaborate general fundamental principle of physical vapor deposition (PVD) system for metal thin film preparation in micro-nanometer scale. The influence of thermodynamic parametersmore » and metal characteristic such as melting point and particle size will be elucidated. Physical description of deposition process in the chamber can be simplified by schematic evaporation phenomena which is supported by experimental measurement such as SEM and XRD.« less

Assessment of Cyclic Lifetime of NiCoCrAlY/ZrO2-Based EB-PVD TBC Systems via Reactive Element Enrichment in the Mixed Zone of the TGO Scale

NASA Astrophysics Data System (ADS)

Fritscher, Klaus; Braue, Wolfgang; Schulz, Uwe

2013-05-01

The chemical composition of the alumina-zirconia mixed zone (MZ) of an electron beam physical vapor deposited thermal barrier coating (EB-PVD TBC) system is affected by service conditions and by the interdiffusion of elements from the substrate alloy below and the zirconia top coat. Three NiCoCrAlY bond-coated Ni-base substrates with YPSZ or CeSZ EB-PVD TBCs were subjected to a cyclic furnace oxidation test (FCT) at 1373 K (1100 °C) in order to provide experimental evidence of a link between chemistry of the MZ, the substrate alloy, the ceramic top coat, and the time in the FCT. Energy dispersive spectroscopy of the MZ revealed preferred accumulation of Cr, Zr, Y, and Ce. The concentration of the reactive elements (RE = Ce + Y + Zr) was related to the respective average lifetimes of the TBC systems at 1373 K (1100 °C). The RE content in the MZ turned out to be a life-limiting parameter for YPSZ and CeSZ TBC systems which can be utilized to predict their relative lifetimes on the individual substrates. Conversely, the TBC failure mechanisms of YPSZ and CeSZ TBC systems are dissimilar.

Galaxy and Mass Assembly (GAMA): small-scale anisotropic galaxy clustering and the pairwise velocity dispersion of galaxies

NASA Astrophysics Data System (ADS)

Loveday, J.; Christodoulou, L.; Norberg, P.; Peacock, J. A.; Baldry, I. K.; Bland-Hawthorn, J.; Brown, M. J. I.; Colless, M.; Driver, S. P.; Holwerda, B. W.; Hopkins, A. M.; Kafle, P. R.; Liske, J.; Lopez-Sanchez, A. R.; Taylor, E. N.

2018-03-01

The galaxy pairwise velocity dispersion (PVD) can provide important tests of non-standard gravity and galaxy formation models. We describe measurements of the PVD of galaxies in the Galaxy and Mass Assembly (GAMA) survey as a function of projected separation and galaxy luminosity. Due to the faint magnitude limit (r < 19.8) and highly complete spectroscopic sampling of the GAMA survey, we are able to reliably measure the PVD to smaller scales (r⊥ = 0.01 h - 1 Mpc) than previous work. The measured PVD at projected separations r⊥ ≲ 1 h - 1 Mpc increases near monotonically with increasing luminosity from σ12 ≈ 200 km s - 1 at Mr = -17 mag to σ12 ≈ 600 km s - 1 at Mr ≈ -22 mag. Analysis of the Gonzalez-Perez et al. (2014) GALFORM semi-analytic model yields no such trend of PVD with luminosity: the model overpredicts the PVD for faint galaxies. This is most likely a result of the model placing too many low-luminosity galaxies in massive haloes.

Effects of intrauterine infusion of Escherichia coli lipopolysaccharide on uterine health, resolution of purulent vaginal discharge, and reproductive performance of lactating dairy cows.

PubMed

Moraes, João G N; Silva, Paula R B; Mendonça, Luís G D; Scanavez, Alexandre A; Silva, Joseane C C; Chebel, Ricardo C

2017-06-01

The objectives of the current experiment were to evaluate the effects of intrauterine infusion of Escherichia coli lipopolysaccharide (LPS) in cows diagnosed with purulent vaginal discharge (PVD) on intrauterine cell population, resolution of PVD, uterine health, and reproductive performance. Jersey cows (n = 3,084) were examined using the Metricheck device to diagnose PVD at 35 ± 6 d postpartum. Purulent vaginal discharge was defined as the presence of purulent (≥50% pus) discharge detectable in the vagina. Of the 310 cows positive for PVD, 267 cows were enrolled in the current experiment. To ensure proper timing of treatment and collection of samples, only 9 PVD-positive cows were treated per day. Selected cows were balanced at 35 ± 6 d postpartum for lactation number, body condition score, and milk yield and were randomly assigned to receive an intrauterine infusion of 20 mL of phosphate-buffered saline (PBS; control, n = 87), 20 mL of PBS with 150 µg LPS (LPS150, n = 91), or 20 mL of PBS with 300 µg of LPS (LPS300, n = 89). Uterine cytology was performed immediately before treatment and 1, 2, and 7 d after treatment to evaluate the effect of LPS treatment on intrauterine cell population. Cows were examined with the Metricheck device at 7 and 28 d after treatment to evaluate the effects of treatment on resolution of PVD. Reproductive status was recorded up to 200 d postpartum. Cows diagnosed with PVD had greater incidence of twinning, dystocia, retained placenta, and metritis after calving than cows without PVD. Count of polymorphonuclear leukocytes (PMNL) in uterine cytology 1, 2, and 7 d after intrauterine infusion was not statistically different among treatments. From d 0 to 1, however, PMNL count in uterine cytology of PBS cows increased by 5%, whereas the PMNL count in uterine cytology of LPS150 and LPS300 cows increased by 54 and 48%, respectively. Treatment did not affect the likelihood of cows being diagnosed with PVD 7 and 28 d after intrauterine

Short- and long-latency auditory evoked potentials in individuals with vestibular dysfunction.

PubMed

Santos Filha, Valdete Alves Valentins Dos; Bruckmann, Mirtes; Garcia, Michele Vargas

2018-01-01

Purpose Evaluate the auditory pathway at the brainstem and cortical levels in individuals with peripheral vestibular dysfunction. Methods The study sample was composed 19 individuals aged 20-80 years that presented exam results suggestive of Peripheral Vestibular Disorder (PVD) or Vestibular Dysfunction (VD). Participants underwent evaluation of the auditory pathway through Brainstem Auditory Evoked Potentials (BAEP) (short latency) and P1, N1, P2, N2, and P300 cortical potentials (long latency). Results Nine individuals presented diagnosis of VD and 10 participants were diagnosed with PVD. The overall average of the long latency potentials of the participants was within the normal range, whereas an increased mean was observed in the short latency of waves III and V of the left ear, as well as in the I - III interpeak interval of both ears. Association of the auditory potentials with VD and PVD showed statistically significant correlation only in the III - V interpeak interval of the right ear for short latency. Comparison between the long and short latencies in the groups showed differences between VD and PVD, but without statistical significance. Conclusion No statistically significant correlation was observed between VD/PVD and the auditory evoked potentials; however, for the long latency potentials, individuals with VD presented higher latency in P1, N1, P2, and N2, where as participants with PVD showed higher latency in P300. In the short latency potentials, there was an increase in the absolute latencies in the VD group and in the interpeak intervals in the PVD group.

Body image in women with primary and secondary provoked vestibulodynia: a controlled study.

PubMed

Maillé, Delphine L; Bergeron, Sophie; Lambert, Bernard

2015-02-01

Provoked vestibulodynia (PVD) is a women's genito-pelvic pain condition associated with psychosexual impairments, including depression. Body image (BI) has been found to be different in women with primary (PVD1) and secondary (PVD2) PVD. No controlled study has compared BI in women with PVD1 and PVD2 and investigated its associations with sexual satisfaction, sexual function, and pain. The aims of this study were to (i) compare BI in women with PVD1, PVD2, and asymptomatic controls and (ii) to examine associations between BI and sexual satisfaction, sexual function, and pain during intercourse in women with PVD. Fifty-seven women (20 with PVD1, 19 with PVD2, and 18 controls) completed measures of BI, sexual satisfaction, sexual function, pain during intercourse, and depression. The main outcome measures were (i) Global Measure of Sexual Satisfaction Scale, (ii) Female Sexual Function Index, and (iii) pain numerical rating scale. Controlling for depression, women with PVD1 reported more body exposure anxiety during sexual activities than women with PVD2 and controls F(2,51)=4.23, P=0.02. For women with PVD, more negative BI during sexual activities was associated with lower sexual satisfaction (β=-0.45, P=0.02) and function (β=-0.39, P=0.04) and higher pain during intercourse (β=0.59, P=0.004). More positive body esteem was associated with higher sexual function (β=0.34, P=0.05). Findings suggest that women with PVD1 present more body exposure anxiety during sexual activities than women with PVD2 and asymptomatic women. Body esteem and general attitudes toward women's genitalia were not significantly different between groups. Higher body exposure anxiety during sexual activities was associated with poorer sexual outcomes in women with PVD. Further studies assessing interventions targeting BI during sexual activities in this population are needed, as improving BI during sexual interactions may enhance sexual outcomes in women with PVD. © 2014 International

A comparison of demographic and psychosexual characteristics of women with primary versus secondary provoked vestibulodynia.

PubMed

Brotto, Lori A; Sadownik, Leslie A; Thomson, Sydney; Dayan, Marcy; Smith, Kelly B; Seal, Brooke N; Moses, Melissa; Zhang, Areiyu

2014-05-01

Provoked vestibulodynia (PVD) is a distressing genital pain condition affecting approximately 12% of premenopausal women. It has been speculated that primary (ie, lifelong) and secondary (ie, acquired) PVD may represent 2 distinct conditions with different etiologies. There is also evidence that primary and secondary PVD subtypes may respond differently to conventional treatments. The goal of this study was to compare the demographic, clinical, and psychosexual characteristics of a large sample of premenopausal women with primary and secondary PVD. A total of 132 premenopausal women (n=42 primary; n=90 secondary) with PVD who sought treatment in a Multidisciplinary Vulvodynia Program completed demographic questions and a battery of validated self-report measures before treatment. Women with primary PVD had a longer duration of PVD as well as more time before diagnosis. Women with secondary PVD reported significantly more clitoral hood pain, higher overall vestibular pain levels, more overall sexual dysfunction and sex-related distress, and proportionately more intercourse occasions that were painful. Women with primary pain stated they had significantly more dysmenorrhea and were more likely to report that their partners were unaware of their PVD symptoms. There were no significant subtype differences on any psychological measure but a trend towards higher magnification of symptoms in women with secondary PVD. Overall the findings suggest some important differences in the characteristics of women with primary versus secondary PVD which may have management-related implications.

Structural and Mechanical Properties of the ZrC/Ni-Nanodiamond Coating Synthesized by the PVD and Electroplating Processes for the Cutting Knifes

NASA Astrophysics Data System (ADS)

Chayeuski, V.; Zhylinski, V.; Cernashejus, O.; Visniakov, N.; Mikalauskas, G.

2018-04-01

In this work, combined gradient ZrC/Ni-nanodiamond ultradispersed diamonds (UDD) coatings were synthesized on the surface of knife blades made of hard alloy WC-2 wt.% Co by electroplating and cathode arc evaporation PVD techniques to increase the durability period of a wood-cutting milling tool. The microstructure, phase and elemental composition, microhardness, and adhesion strength of the coatings were investigated. Ni-UDD layer is not mixed with the ZrC coating and hard alloy substrate. Cobalt is present in Ni-UDD layer after deposition of ZrC. The ZrC/Ni-nanodiamond coating consists of separate phases of zirconium carbide (ZrC), α-Ni, and Ni-UDD. The maximum value of microhardness of the Ni-nanodiamond coating is 5.9 GPa. The microhardness value of the ZrC/Ni-nanodiamond coatings is 25 ± 6 GPa, which corresponds to the microhardness of the hard alloy substrate and ZrC coating. The obtained high values of the critical loads on the scratch track of the ZrC/Ni-nanodiamond coating in 24 N prove a sufficiently high value of the adhesion strength of the bottom Ni-UDD layer with WC-Co substrate. Pilot testing of ZrC/Ni-nanodiamond-coated cutting tools proved their increasing durability period to be 1.5-1.6 times higher than that of bare tools, when milling laminated chipboard.

Dimensional stability and electrochemical behaviour of ZrO2 incorporated electrospun PVdF-HFP based nanocomposite polymer membrane electrolyte for Li-ion capacitors.

PubMed

Solarajan, Arun Kumar; Murugadoss, Vignesh; Angaiah, Subramania

2017-04-11

Different weight percentages of ZrO 2 (0, 3, 5, 7 and 10 wt%) incorporated electrospun PVDF-HFP nanocomposite polymer membranes (esCPMs) were prepared by electrospinning technique. They were activated by soaking in 1 M LiPF 6 containing 1:1 volume ratio of EC : DMC (ethylene carbonate:dimethyl carbonate) to get electrospun nanocomposite polymer membrane electrolytes (esCPMEs). The influence of ZrO 2 on the physical, mechanical and electrochemical properties of esCPM was studied in detail. Finally, coin type Li-ion capacitor cell was assembled using LiCo 0.2 Mn 1.8 O 4 as the cathode, Activated carbon as the anode and the esCPME containing 7 wt% of ZrO 2 as the separator, which delivered a discharge capacitance of 182.5 Fg -1 at the current density of 1Ag -1 and retained 92% of its initial discharge capacitance even after 2,000 cycles. It revealed that the electrospun PVdF-HFP/ZrO 2 based nanocomposite membrane electrolyte could be used as a good candidate for high performance Li-ion capacitors.

Effects of TiO2 and ZrO2 nanofillers in LiBOB based PVdF/PVC composite polymer electrolytes (CPE)

NASA Astrophysics Data System (ADS)

Aravindan, V.; Vickraman, P.

2007-11-01

A novel type of lithium bis(oxalato)borate (LiBOB) synthesized by the solid-state reaction method has been presented. LiBOB composite polymer electrolytes (CPE) prepared with dispersions of TIO2/ZrO2with various concentrations into the host blend matrices of poly(vinylidenefluoride) (PVdF)-poly(vinylchloride) (PVC) are investigated by scanning electron microscopy, x-ray diffraction (XRD) and ac impedance measurements. The plasticizing agent selected for the present study is a mixture of ethylene carbonate (EC) and diethyl carbonate (DEC) for the phase separated morphology of the studied polymers. The impedance studies on CPE membranes identify that membranes, with 2.5 wt% of fillers, have enhanced conductivities of 5.43 × 10-4 S cm-1 and 4.38 × 10-4 S cm-1, respectively, for TiO2 and ZrO2 at ambient temperature. The XRD investigations confirm that the membranes with filler levels exceeding the limit of 2.5 wt% show a gradual increase in the degree of crystallinity, rendering them less conducting. The activation energy calculations also highlight variations in conductivities of all the membranes.

Cognitive, psychophysical, and neural correlates of vulvar pain in primary and secondary provoked vestibulodynia: a pilot study.

PubMed

Sutton, Katherine; Pukall, Caroline; Wild, Conor; Johnsrude, Ingrid; Chamberlain, Susan

2015-05-01

Provoked vestibulodynia (PVD) is a common condition characterized by localized, provoked pain that can be present since first vaginal penetration attempt (primary) or can develop after a period of pain-free penetration (secondary). Research has demonstrated psychosocial and psychophysical differences between women with these subtypes of PVD, but the question of whether neural responses to pain also differ remains to be investigated. This study aims to examine whether cognitive, psychophysical, and neural responses to vulvar pressure pain differ between women with PVD1 and PVD2. Women with PVD1 and PVD2 were compared for group differences using multiple modalities, including questionnaires, psychophysical testing, and neuroimaging. Pain ratings were held constant across groups, rather than amount of pressure applied. Demographics, sexual functioning, four questionnaires examining anxiety and catastrophizing, quantitative sensory testing at the vulvar vestibule using a vulvalgesiometer, and functional and structural magnetic resonance imaging (MRI). Findings suggest that women with PVD1 are more anxious and that they catastrophize more about their vulvar and nonvulvar pain than women with PVD2. Overall, MRI results demonstrated structural and functional similarities to other chronic pain findings for both groups of women. Gray matter (GM) density also differed between groups: women with PVD1 showed significant decreases in GM throughout areas associated with pain processing. Functionally, between-groups differences were found during painful vulvar stimulation despite lower pressures applied to the vulva for women with PVD1 because of their heightened sensitivity; the determination of the level of vulvar pressure to elicit pain was based on subjective ratings. Findings are limited by sample size and liberal alpha values; however, future research is certainly warranted based on the preliminary findings of this study suggesting both similarities and differences between

A common pronociceptive pain modulation profile typifying subgroups of chronic pelvic pain syndromes is interrelated with enhanced clinical pain.

PubMed

Grinberg, Keren; Granot, Michal; Lowenstein, Lior; Abramov, Liora; Weissman-Fogel, Irit

2017-06-01

Provoked vestibulodynia (PVD) and painful bladder syndrome (PBS), subgroups of chronic pelvic pain syndromes (CPPS), are considered to share common biophysiological peripheral mechanisms. In addition, indications of a pronociceptive pain profile coexisting with psychological vulnerability suggest common dysfunctional pain processing and pain modulation in these 2 subgroups of CPPS. We therefore aimed at comparing the pain profile and psychological traits of patients with PVD and PBS to see whether the pain profile contributes to intersubject variability of clinical pain symptoms. Patients with PVD (n = 18) and PBS (n = 21) were compared with healthy controls (n = 20) in their responses to (1) pain psychophysical tests applied to both referred (suprapubis) and remote (hand) body areas and (2) pain-related psychological factors (pain catastrophizing, depression, anxiety, and somatization). We found a similar pronociceptive pain profile in the 2 subgroups of CPPS-enhanced facilitation (ie, hyperalgesia in the referred body area [P < 0.001]) and inefficient inhibition (ie, reduced conditioned pain modulation [P < 0.001] that were associated with both enhanced pain ratings evoked during trigger point examination [P < 0.037]) and higher Brief Pain Inventory ratings (P = 0.002). The latter was also correlated with pain catastrophizing (r = 0.504, P = 0.001) and depression symptoms (r = 0.361, P = 0.024). The findings suggest common mechanisms underlying a dysfunctional nociceptive system in both PVD and PBS. The intersubject variability in the level of dysfunction and its association with disease severity recommends a personalized pain treatment that may alleviate daily pain and dysfunction in patients with CPPS.

Dimensional stability and electrochemical behaviour of ZrO2 incorporated electrospun PVdF-HFP based nanocomposite polymer membrane electrolyte for Li-ion capacitors

PubMed Central

Solarajan, Arun Kumar; Murugadoss, Vignesh; Angaiah, Subramania

2017-01-01

Different weight percentages of ZrO2 (0, 3, 5, 7 and 10 wt%) incorporated electrospun PVDF-HFP nanocomposite polymer membranes (esCPMs) were prepared by electrospinning technique. They were activated by soaking in 1 M LiPF6 containing 1:1 volume ratio of EC : DMC (ethylene carbonate:dimethyl carbonate) to get electrospun nanocomposite polymer membrane electrolytes (esCPMEs). The influence of ZrO2 on the physical, mechanical and electrochemical properties of esCPM was studied in detail. Finally, coin type Li-ion capacitor cell was assembled using LiCo0.2Mn1.8O4 as the cathode, Activated carbon as the anode and the esCPME containing 7 wt% of ZrO2 as the separator, which delivered a discharge capacitance of 182.5 Fg−1 at the current density of 1Ag−1 and retained 92% of its initial discharge capacitance even after 2,000 cycles. It revealed that the electrospun PVdF-HFP/ZrO2 based nanocomposite membrane electrolyte could be used as a good candidate for high performance Li-ion capacitors. PMID:28397783

A.C. impedance, XRD, DSC, SEM and charge/discharge studies on Al2O3, TiO2, SiO2 dispersoid LiPF6/PVC/PVdF-co-HFP composite polymer electrolytes by phase inversion

NASA Astrophysics Data System (ADS)

Vickraman, P.; Gopukumar, S.

2017-07-01

The PVC/PVdF-co-HFP composite polymer electrolyte membranes (CPEMs) by varying blend ratios 1:1, 1:2, and 2:1 with fixed content of Al2O3, TiO2 and SiO2 having soaked in 0.5 M LiPF6 in EC/DEC (1:1) v/v) have been prepared by phase inversion. CPEMs of higher ionic conductivity (not dependent on electrolyte uptake as observed in our study) ASA4 (3.61×10-4 Scm-1), TSA3 (1.53×10-4 Scm-1), and SSA3 (4.81×10-4 Scm-1) have been only chosen for XRD, DSC, SEM and electrochemical studies. In XRD, crystalline peaks (phases) of PVdF have been noted with/without change in intensity as well as FWHM which correspond to type of filler interaction with host matrix. In DSC, it is observed that shifts in baseline, melting endotherms, and area under the endotherms indicating the thermal hist ory of PVC (Tg = 82 ° C) and melting of VdF crystallites varied with nature of the filler dispersoid. In SEM, the coagulated fibrils of the polymer coiled with the sponge like structure has been mapped. The charge/discharge studies are carried out on these CPEMs at C/10 rate in the voltage range 2.8 V - 4.2 V, and it is noted that the TSA3 showed better cycling performance with good capacity retention i.e., 50 cycles with 66% capacity retention than ASA4 of 28 cycles with 65% and SSA3 of 5 cycles with 56%. In the present study Coulombic efficiency is concerned only for first cycle and it is noted that the TSA3 showed 71% than 66% and 62% respectively for SSA3 and ASA4.

Metallic biomaterials TiN-coated: corrosion analysis and biocompatibility.

PubMed

Paschoal, André Luís; Vanâncio, Everaldo Carlos; Canale, Lauralice de Campos Franceschini; da Silva, Orivaldo Lopes; Huerta-Vilca, Domingos; Motheo, Artur de Jesus

2003-05-01

Corrosion processes due to contact with the physiological environment should be avoided or minimized in orthopedic implants. Four metallic substrates frequently used as biomaterials: pure Ti, Ti-6Al-4V alloy, ASTM F138 stainless steel, and Co-Cr-Mo alloy, were coated with TiN using the physical vapor deposition (PVD) technique. These coatings have been screened by polarization curves in physiological solutions. TiN prepared by PVD is efficient as coating for stainless steel. On titanium and alloy there are no benefits concerning the corrosion resistance compared to the bare Ti-materials. TiN coatings have been screened according to ISO 10993 standard tests for biocompatibility and exhibited no cytotoxicity, dermal irritation, or acute systemic toxicity response.

Purulent vaginal discharge in grazing dairy cows: Risk factors, reproductive performance, and prostaglandin F2α treatment.

PubMed

Giuliodori, M J; Magnasco, M; Magnasco, R P; Lacau-Mengido, I M; de la Sota, R L

2017-05-01

The objectives of this study were to assess the association of a 4-point scale of vaginal discharge score (VDS) with time to pregnancy to define criteria for a practical case of purulent vaginal discharge (PVD) in dairy cows, to test the risk factors for PVD, and, finally, the effect of a dose of PGF 2α on cure and reproductive performance. In experiment 1, grazing Holstein cows (n = 2,414) had their vaginal discharge scored at ∼32 d in milk (DIM) on a 4-point scale, the effect of VDS on the hazard of pregnancy by 300 DIM was then assessed to derive a case definition of PVD. Risk factors for PVD and self-cure were also assessed. In experiment 2, grazing Holstein cows (n = 6,326) from 5 herds were checked for PVD at ∼30 DIM. Cows with PVD were assigned to receive one dose of 500 μg of PGF 2α analog (Cloprostenol; Ciclase, Syntex SA, Buenos Aires, Argentina) per cow (odd ear tag number) or to remain untreated (even tag number). Cure was declared if cows presented clear normal vaginal discharge (VDS-0) at visit 2 (∼62 DIM). Data were analyzed with Cox's regression and mixed logistic models. In experiment 1, cows with VDS ≥1 had lower hazard of pregnancy and longer calving to pregnancy interval than cows with VDS-0. This finding was not affected by the time at which the diagnosis was performed. Therefore, a cow ≥21 DIM and having VDS ≥1 was used to define a case of PVD. The odds of PVD were greater in primiparous cows compared with multiparous, in cows with abnormal calving compared with those with normal calving, and in those losing BCS peripartum. In experiment 2, PGF 2α treatment tended to slightly increase the hazard of pregnancy (adjusted hazard ratio = 1.13). Conversely, PGF 2α had no effect on the odds of cure of PVD [adjusted odds ratio (AOR) = 1.19], pregnancy at first service (AOR = 1.03), or pregnancy by 100 DIM (AOR = 0.89) or 200 DIM (AOR = 1.27). In conclusion, cows with VDS ≥1 can be considered to have PVD because of their lower hazard

Provoked Vestibulodynia: Does Pain Intensity Correlate With Sexual Dysfunction and Dissatisfaction?

PubMed

Aerts, Leen; Bergeron, Sophie; Pukall, Caroline F; Khalifé, Samir

2016-06-01

Provoked vestibulodynia (PVD) is suspected to be the most frequent cause of vulvodynia in premenopausal women. Previous research has been inconclusive as to whether higher vulvovaginal pain ratings are associated with lower sexual function and satisfaction in women with PVD. Whether pain intensity correlates with sexual impairment is an important question given its implications for treatment recommendations. To examine the associations among self-reported and objective pain measurements, sexual function, and sexual satisfaction in a large combined clinical and community sample of premenopausal women diagnosed with PVD. Ninety-eight women with PVD underwent a cotton-swab test, a vestibular friction pain measurement, and a vestibular pressure-pain threshold measurement. In addition to sociodemographics, participants completed measurements of pain, sexual function, and sexual satisfaction. Self-report measurements were the pain numerical rating scale (0-10), the McGill-Melzack Pain Questionnaire, the Female Sexual Function Index, and the Global Measure of Sexual Satisfaction. Objective measurements were pain during a cotton-swab test, pain during a vestibular friction procedure, and the vestibular pressure-pain threshold measurement. Age and relationship duration were significantly correlated with the Female Sexual Function Index total score (r = -0.31, P < .01; and r = -0.22, P < .05, respectively). When controlling for age, intercourse-related pain intensity, pain during the cotton-swab test, pain during vestibular friction, the vestibular pressure-pain threshold, and the McGill-Melzack Pain Questionnaire sensory and affective subscale scores were not significantly associated with sexual function and satisfaction in women with PVD. The findings show that in women with PVD, self-report and objective pain ratings are not associated with sexual function and satisfaction. The results support the biopsychosocial nature of PVD and underscore the importance of a

Identification of type II and type III pyoverdine receptors from Pseudomonas aeruginosa.

PubMed

de Chial, Magaly; Ghysels, Bart; Beatson, Scott A; Geoffroy, Valérie; Meyer, Jean Marie; Pattery, Theresa; Baysse, Christine; Chablain, Patrice; Parsons, Yasmin N; Winstanley, Craig; Cordwell, Stuart J; Cornelis, Pierre

2003-04-01

Pseudomonas aeruginosa produces, under conditions of iron limitation, a high-affinity siderophore, pyoverdine (PVD), which is recognized at the level of the outer membrane by a specific TonB-dependent receptor, FpvA. So far, for P. aeruginosa, three different PVDs, differing in their peptide chain, have been described (types I-III), but only the FpvA receptor for type I is known. Two PVD-producing P. aeruginosa strains, one type II and one type III, were mutagenized by a mini-TnphoA3 transposon. In each case, one mutant unable to grow in the presence of the strong iron chelator ethylenediaminedihydroxyphenylacetic acid (EDDHA) and the cognate PVD was selected. The first mutant, which had an insertion in the pvdE gene, upstream of fpvA, was unable to take up type II PVD and showed resistance to pyocin S3, which is known to use type II FpvA as receptor. The second mutant was unable to take up type III PVD and had the transposon insertion in fpvA. Cosmid libraries of the respective type II and type III PVD wild-type strains were constructed and screened for clones restoring the capacity to grow in the presence of PVD. From the respective complementing genomic fragments, type II and type III fpvA sequences were determined. When in trans, type II and type III fpvA restored PVD production, uptake, growth in the presence of EDDHA and, in the case of type II fpvA, pyocin S3 sensitivity. Complementation of fpvA mutants obtained by allelic exchange was achieved by the presence of cognate fpvA in trans. All three receptors posses an N-terminal extension of about 70 amino acids, similar to FecA of Escherichia coli, but only FpvAI has a TAT export sequence at its N-terminal end.

Characteristics and Machining Performance of TiN and TiAlN Coatings on a Milling Cutter

NASA Astrophysics Data System (ADS)

Sarwar, Mohammed; Haider, Julfikar

2011-01-01

Titanium Nitride (TiN) coating deposited by Physical Vapour Deposition (PVD) or Chemical Vapour Deposition (CVD) techniques on cutting tools (single point or multipoint) has contributed towards the improvement of tool life, productivity and product quality [1]. Addition of Al in TiN coating (e.g., TiAlN or AlTiN) has further improved the coating properties required for machining applications [2, 3]. This work presents a comparative investigation on TiN and TiAlN coatings deposited on to a Powder Metallurgy High Speed Steel (PM HSS) milling cutter used for machining bimetal (M42+D6A) steel strips. PVD (Arc evaporation) technique was used to deposit the coatings after carefully preparing the cutting edges of the milling cutter. Microstructure, chemical composition, hardness and adhesion of the coatings have been characterised using different techniques. The incorporation of Al into TiN coating results in an improvement in hardness, wear resistance and cutting performance. Examination of the worn flank in the coated cutting edges revealed that abrasive and adhesive wear are the predominant failure mechanisms. Tool designers, coating suppliers and manufacturing engineers could benefit from the information provided.

UKPDS 59: hyperglycemia and other potentially modifiable risk factors for peripheral vascular disease in type 2 diabetes.

PubMed

Adler, Amanda I; Stevens, Richard J; Neil, Andrew; Stratton, Irene M; Boulton, Andrew J M; Holman, Rury R

2002-05-01

To determine the role of hyperglycemia in prospective analyses of peripheral vascular disease (PVD) in type 2 diabetes, taking into account other potential risk factors. Potential risk factors for the development of PVD were examined in 3,834 of 5,102 individuals enrolled in the U.K. Prospective Diabetes Study (UKPDS) without PVD at diagnosis of diabetes, followed for 6 years, and for whom relevant data were available. PVD was defined as two of the following: ankle-arm blood pressure index < 0.8, absence of both dorsalis pedis and posterior tibial pulses to palpation in one or both legs, and intermittent claudication. Logistic regression was used to estimate the association between potential risk factors measured 3-4 months after diagnosis of diabetes and incident PVD. The prevalence of PVD at 3-year intervals to 18 years was determined. Hyperglycemia, assessed as HbA(1c), was associated with an increased risk for incident PVD, independent of other risk factors including age, increased systolic blood pressure, reduced HDL cholesterol, smoking, prior cardiovascular disease, peripheral sensory neuropathy, and retinopathy. Each 1% increase in HbA(1c) was associated with a 28% increased risk of PVD (95% CI 12-46), and each 10-mmHg increase in systolic blood pressure with a 25% increase in risk (95% CI 10-43). Hyperglycemia, as well as smoking, dyslipidemia, and blood pressure are potentially modifiable risk factors for the development of PVD.

Pseudomonas protegens Pf-5 favours self-produced siderophore over free-loading in interspecies competition for iron.

PubMed

Sexton, D Joseph; Glover, Rochelle C; Loper, Joyce E; Schuster, Martin

2017-09-01

Many microorganisms compete for extracellular iron using strain-specific chelators known as siderophores. The ferric-siderophore complex limits local access to iron because import requires a suitable cognate receptor. Interestingly, many species carry receptors that enable 'cross-feeding' on heterologous siderophores made by neighboring organisms, although little is known about how this ubiquitous behaviour is regulated. Here, we investigated the soil bacterium Pseudomonas protegens Pf-5, a strain remarkable for its ability to use dozens of heterologous siderophores. We characterized the expression of six pyoverdine-type (PVD) siderophore receptors in response to their cognate PVD. In general, we found expression is tightly regulated to reflect availability of their cognate PVD. In contrast, Pf-5 continues to secrete its own primary siderophore, PVD Pf-5 , despite the capability and opportunity to cross-feed. We demonstrate that this strategy is beneficial in co-culture with a competing PVD PAO1 -producer, P. aeruginosa PAO1. Although Pf-5 can cross-feed on PVD PAO1 , production of PVD Pf-5 is required to maintain a competitive advantage. We attribute this to an antagonistic effect of PVD Pf-5 on the growth of PAO1, presumably through limiting access to iron. Our results demonstrate the benefits of excluding competitors out-weigh the incentives associated with a free-loader lifestyle for Pf-5. © 2017 Society for Applied Microbiology and John Wiley & Sons Ltd.

Incidence, Progression, and Associated Risk Factors of Posterior Vitreous Detachment in Type 2 Diabetes Mellitus: Sankara Nethralaya Diabetic Retinopathy Epidemiology and Molecular Genetic Study (SN-DREAMS II, Report No. 7).

PubMed

Gella, Laxmi; Raman, Rajiv; Pal, Swakshyar Saumya; Ganesan, Suganeswari; Sharma, Tarun

2017-01-01

To report the incidence and progression of posterior vitreous detachment (PVD) and factors influencing the same in a cohort of patients with type 2 diabetes in a South Indian population. A subset of 615 subjects from Sankara Nethralaya Diabetic Retinopathy Epidemiology and Molecular Genetics Study II were included in this study. All of the subjects underwent detailed ophthalmic evaluation including stereo fundus photography. The status of PVD was assessed using B-scan ultrasonography. A p value of <0.05 was considered statistically significant. The incidence of either incomplete PVD (IPVD) or complete PVD (CPVD) from no PVD at baseline visit was 80.8%. Of them, 32.63% converted to CPVD from IPVD at baseline. High prevalence of emmetropia was observed in subjects with stable No PVD. Risk factors associated with the conversion of CPVD from no PVD and IPVD at baseline were age (OR: 1.04, p = 0.002), myopia (OR: 2.14, p = 0.009), and increase in axial length (OR: 1.35, p = 0.004). Subjects undergoing cataract surgery were at 2.32 times higher risk of converting to CPVD (p = 0.038). Independent risk factors for the progression of PVD were increase in age, myopia, increased axial length, and cataract surgery.

Functional display of ice nucleation protein InaZ on the surface of bacterial ghosts.

PubMed

Kassmannhuber, Johannes; Rauscher, Mascha; Schöner, Lea; Witte, Angela; Lubitz, Werner

2017-09-03

In a concept study the ability to induce heterogeneous ice formation by Bacterial Ghosts (BGs) from Escherichia coli carrying ice nucleation protein InaZ from Pseudomonas syringae in their outer membrane was investigated by a droplet-freezing assay of ultra-pure water. As determined by the median freezing temperature and cumulative ice nucleation spectra it could be demonstrated that both the living recombinant E. coli and their corresponding BGs functionally display InaZ on their surface. Under the production conditions chosen both samples belong to type II ice-nucleation particles inducing ice formation at a temperature range of between -5.6 °C and -6.7 °C, respectively. One advantage for the application of such BGs over their living recombinant mother bacteria is that they are non-living native cell envelopes retaining the biophysical properties of ice nucleation and do no longer represent genetically modified organisms (GMOs).

Synthesis, iron(III) complexation properties, molecular dynamics simulations and P. aeruginosa siderophore-like activity of two pyoverdine analogs.

PubMed

Antonietti, Viviane; Boudesocque, Stéphanie; Dupont, Laurent; Farvacques, Natacha; Cézard, Christine; Da Nascimento, Sophie; Raimbert, Jean-François; Socrier, Larissa; Robin, Thierry-Johann; Morandat, Sandrine; El Kirat, Karim; Mullié, Catherine; Sonnet, Pascal

2017-09-08

P. aeruginosa ranks among the top five organisms causing nosocomial infections. Among the many novel strategies for developing new therapeutics against infection, targeting iron uptake mechanism seems promising as P. aeruginosa needs iron for its growth and survival. To scavenge iron, the bacterium produces siderophores possessing a very high affinity towards Fe(III) ions such as pyoverdines. In this work, we decided to study two pyoverdine analogs, aPvd2 and aPvd3, structurally close to the endogen pyoverdine. The pFe constants calculated with the values of formation showed a high affinity of aPvd3 towards Fe(III). Molecular dynamics calculations demonstrated that aPvd3-Fe forms with Fe(III) stable 1:1 complexes in water, whereas aPvd2 does not. Only aPvd3 is able to increase the bacterial growth and represents thus an alternative to pyoverdine for iron acquisition by the bacterium. The aPvd2-3 interaction studies with a lipid membrane indicated that they were unable to interact and to cross the plasma membrane of bacteria by passive diffusion. Consequently, the penetration of aPvd3 is ruled by a transport membrane protein. These results showed that aPvd3 may be used to inhibit pyoverdine uptake or to promote the accumulation and release of antibiotics into the cell following a Trojan horse strategy. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Effectiveness of intrauterine treatment with cephapirin in dairy cows with purulent vaginal discharge.

PubMed

Tison, N; Bouchard, E; DesCôteaux, L; Lefebvre, R C

2017-02-01

The objective of this study was to assess the efficacy of cephapirin intrauterine treatment preceding a timed artificial insemination protocol in lactating dairy cows with purulent vaginal discharges (PVDs). Holstein dairy cows (n = 1247) from 18 herds were enrolled in a controlled randomized clinical trial. At 34 days in milk (DIM; ±7 days), cows had a genital examination (transrectal palpation, vaginoscopy, and uterine bacteriology). They were randomly assigned to either the control group (CONT, no treatment) or the treatment group (CEPH) consisting of 1 intrauterine infusion of 500-mg cephapirin benzathine (RCL) (Metricure, Merck Animal Health, Montreal, Canada) regardless of the uterine health status. All cows were systematically enrolled in a presynch-ovsynch protocol for the first insemination. A second genital examination was made 2 weeks later. Cows that received any systemic or local antibiotics 10 days prior sampling to the end of the synchronization protocol were excluded from the study. Reproductive data of cows were collected for at least 300 DIM, entered in a databank, and validated (health record management software, DSAHR). Pregnancy diagnosis was done by transrectal palpation at the routinely scheduled veterinarian visits. On the basis of the highest sum of sensibility and specificity for pregnancy status at 120 DIM, the optimal cutoff for vaginal discharge score was determined as the presence of cloudy discharge with or without purulent material (PVD+, score 2). With a prevalence of 21.6% at 34 DIM, PVD+ was detrimental to the first-service conception rate (FSCR; PVD+: 26 ± 5%; PVD-: 40 ± 3%; P = 0.02). The negative effect of PVD+ was indicated by a hazard ratio of 0.72 (chi-square = 8.58; P < 0.01; 95% confidence interval = 0.56-0.91). Treatment with cephapirin was associated with a significant improvement of the FSCR in PVD+ cows (PVD+ CEPH: 36 ± 5%, PVD+ CONT: 23 ± 5%; P < 0.05), although it did not produce a

Functional display of ice nucleation protein InaZ on the surface of bacterial ghosts

PubMed Central

Kassmannhuber, Johannes; Rauscher, Mascha; Schöner, Lea; Witte, Angela; Lubitz, Werner

2017-01-01

ABSTRACT In a concept study the ability to induce heterogeneous ice formation by Bacterial Ghosts (BGs) from Escherichia coli carrying ice nucleation protein InaZ from Pseudomonas syringae in their outer membrane was investigated by a droplet-freezing assay of ultra-pure water. As determined by the median freezing temperature and cumulative ice nucleation spectra it could be demonstrated that both the living recombinant E. coli and their corresponding BGs functionally display InaZ on their surface. Under the production conditions chosen both samples belong to type II ice-nucleation particles inducing ice formation at a temperature range of between −5.6 °C and −6.7 °C, respectively. One advantage for the application of such BGs over their living recombinant mother bacteria is that they are non-living native cell envelopes retaining the biophysical properties of ice nucleation and do no longer represent genetically modified organisms (GMOs). PMID:28121482

Study of two different thin film coating methods in transmission laser micro-joining of thin Ti-film coated glass and polyimide for biomedical applications.

PubMed

Sultana, T; Georgiev, G L; Baird, R J; Auner, G W; Newaz, G; Patwa, R; Herfurth, H J

2009-07-01

Biomedical devices and implants require precision joining for hermetic sealing which can be achieved with low power lasers. The effect of two different thin metal film coating methods was studied in transmission laser micro-joints of titanium-coated glass and polyimide. The coating methods were cathodic arc physical vapor deposition (CA-PVD) and electron beam evaporation (EB-PVD). Titanium-coated glass joined to polyimide film can have neural electrode application. The improvement of the joint quality will be essential for robust performance of the device. Low power fiber laser (wave length = 1100 nm) was used for transmission laser micro-joining of thin titanium (Ti) film (approximately 200 nm) coated Pyrex borosilicate 7740 glass wafer (0.5 mm thick) and polyimide (Imidex) film (0.2 mm thick). Ti film acts as the coupling agent in the joining process. The Ti film deposition rate in the CA-PVD was 5-10 A/s and in the EB-PVD 1.5 A/s. The laser joint strength was measured by a lap shear test, the Ti film surfaces were analyzed by atomic force microscopy (AFM) and the lap shear tested joints were analyzed by optical microscopy and scanning electron microscopy (SEM). The film properties and the failure modes of the joints were correlated to joint strength. The CA-PVD produced around 4 times stronger laser joints than EB-PVD. The adhesion of the Ti film on glass by CA-PVD is better than that of the EB-PVD method. This is likely to be due to a higher film deposition rate and consequently higher adhesion or sticking coefficient for the CA-PVD particles arriving on the substrate compared to that of the EB-PVD film. EB-PVD shows poor laser bonding properties due to the development of thermal hotspots which occurs from film decohesion.

Defense Small Business Innovation Research Program (SBIR). Volume 1. Army Abstracts of Phase 1 Awards 1987.

DTIC Science & Technology

1988-04-01

TECHNOLOGY TO PROTECT LAMINATED FIBERGLASS REIN- FORCES STRUCTURES FROM CHEMICAL AGENTS AND DECONTAMINANTS . FLAME0 RETARDENCY, ADHESION, ABRASION RESISTANCE...OFFICE: BRDC- PVD ALTHOUGH THERE ARE NO INTRINSIC CONFLICTS FOR THE SAME MATERIAL SYSTEMS TO ACHIEVE BOTH THE RADAR ABSORPTION AND THERMAL SUPPRESSION...VEHICLE TOPIC# 135 OFFICE: BRDC- PVD THE OBJECTIVE OF THE PHASE I RESEARCH AND DEVELOPMENT PROPOSED HEREIN IS TO DETERMINE WHICH MAJOR COMPONENTS OF THE

C. elegans multi-dendritic sensory neurons: morphology and function

PubMed Central

Albeg, Adi; Smith, Cody; Chatzigeorgiou, Marios; Feitelson, Dror G.; Hall, David H.; Schafer, William R.; Miller, David M.; Treinin, Millet

2010-01-01

PVD and FLP sensory neurons envelope the body of the C. elegans adult with a highly branched network of thin sensory processes. Both PVD and FLP neurons are mechanosensors. PVD is known to mediate the response to high threshold mechanical stimuli. Thus PVD and FLP neurons are similar in both morphology and function to mammalian nociceptors. To better understand the function of these neurons we generated strains lacking them. Behavioral analysis shows that PVD and FLP regulate movement under normal growth conditions, as animals lacking these neurons demonstrate higher dwelling behavior. In addition, PVD—whose thin branches project across the body-wall muscles—may have a role in proprioception, as ablation of PVD leads to defective posture. Moreover, movement-dependent calcium transients are seen in PVD, a response that requires MEC-10, a subunit of the mechanosensory DEG/ENaC channel that is also required for maintaining wild-type posture. Hence, PVD senses both noxious and innocuous signals to regulate C. elegans behavior, and thus combines the functions of multiple mammalian somatosensory neurons. Finally, strong mechanical stimulation leads to inhibition of egg-laying, and this response also depends on PVD and FLP neurons. Based on all these results we suggest that noxious signals perceived by PVD and FLP promote an escape behavior consisting of increased speed, reduced pauses and reversals, and inhibition of egg-laying. PMID:20971193

Graphite//LiNi0.5 Mn1.5 O4 Cells Based on Environmentally Friendly Made-in-Water Electrodes.

PubMed

De Giorgio, Francesca; Laszczynski, Nina; von Zamory, Jan; Mastragostino, Marina; Arbizzani, Catia; Passerini, Stefano

2017-01-20

The performance of graphite//LiNi 0.5 Mn 1.5 O 4 (LNMO) cells, both electrodes of which are made using water-soluble sodium carboxymethyl cellulose (CMC) binder, is reported for the first time. The full cell performed outstandingly over 400 cycles in the conventional electrolyte ethylene carbonate/dimethyl carbonate-1 m LiPF 6 , and the delivered specific energy at the 100th, 200th, 300th, and 400th cycle corresponded to 82, 78, 73, and 66 %, respectively, of the initial energy value of 259 Wh kg -1 (referring to the sum of the two electrode-composite weights). The good stability of high-voltage, LNMO-CMC-based electrodes upon long-term cycling is discussed and the results are compared to those of LNMO-composite electrodes with polyvinylidene fluoride (PVdF). LNMO-CMC electrodes outperformed those with PVdF binder, displaying a capacity retention of 83 % compared to 62 % for the PVdF-based electrodes after 400 cycles at 1 C. CMC promotes a more compact and stable electrode surface than PVdF; undesired interfacial reactions at high operating voltages are mitigated, and the thickness of the passivation layer on the LNMO surface is reduced, thereby enhancing its cycling stability. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Metal (Ag/Ti)-Containing Hydrogenated Amorphous Carbon Nanocomposite Films with Enhanced Nanoscratch Resistance: Hybrid PECVD/PVD System and Microstructural Characteristics.

PubMed

Constantinou, Marios; Nikolaou, Petros; Koutsokeras, Loukas; Avgeropoulos, Apostolos; Moschovas, Dimitrios; Varotsis, Constantinos; Patsalas, Panos; Kelires, Pantelis; Constantinides, Georgios

2018-03-30

This study aimed to develop hydrogenated amorphous carbon thin films with embedded metallic nanoparticles (a-C:H:Me) of controlled size and concentration. Towards this end, a novel hybrid deposition system is presented that uses a combination of Plasma Enhanced Chemical Vapor Deposition (PECVD) and Physical Vapor Deposition (PVD) technologies. The a-C:H matrix was deposited through the acceleration of carbon ions generated through a radio-frequency (RF) plasma source by cracking methane, whereas metallic nanoparticles were generated and deposited using terminated gas condensation (TGC) technology. The resulting material was a hydrogenated amorphous carbon film with controlled physical properties and evenly dispersed metallic nanoparticles (here Ag or Ti). The physical, chemical, morphological and mechanical characteristics of the films were investigated through X-ray reflectivity (XRR), Raman spectroscopy, Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Transmission Electron Microscopy (TEM) and nanoscratch testing. The resulting amorphous carbon metal nanocomposite films (a-C:H:Ag and a-C:H:Ti) exhibited enhanced nanoscratch resistance (up to +50%) and low values of friction coefficient (<0.05), properties desirable for protective coatings and/or solid lubricant applications. The ability to form nanocomposite structures with tunable coating performance by potentially controlling the carbon bonding, hydrogen content, and the type/size/percent of metallic nanoparticles opens new avenues for a broad range of applications in which mechanical, physical, biological and/or combinatorial properties are required.

Tribological Properties of PVD Ti/C-N Nanocoatnigs

NASA Astrophysics Data System (ADS)

Leitans, A.; Lungevics, J.; Rudzitis, J.; Filipovs, A.

2017-04-01

The present paper discusses and analyses tribological properties of various coatings that increase surface wear resistance. Four Ti/C-N nanocoatings with different coating deposition settings are analysed. Tribological and metrological tests on the samples are performed: 2D and 3D parameters of the surface roughness are measured with modern profilometer, and friction coefficient is measured with CSM Instruments equipment. Roughness parameters Ra, Sa, Sz, Str, Sds, Vmp, Vmc and friction coefficient at 6N load are determined during the experiment. The examined samples have many pores, which is the main reason for relatively large values of roughness parameter. A slight wear is identified in all four samples as well; its friction coefficient values range from 0,.21 to 0.29. Wear rate values are not calculated for the investigated coatings, as no expressed tribotracks are detected on the coating surface.

Hierarchical adaptive nanostructured PVD coatings for extreme tribological applications: the quest for nonequilibrium states and emergent behavior.

PubMed

Fox-Rabinovich, German S; Yamamoto, Kenji; Beake, Ben D; Gershman, Iosif S; Kovalev, Anatoly I; Veldhuis, Stephen C; Aguirre, Myriam H; Dosbaeva, Goulnara; Endrino, Jose L

2012-08-01

Adaptive wear-resistant coatings produced by physical vapor deposition (PVD) are a relatively new generation of coatings which are attracting attention in the development of nanostructured materials for extreme tribological applications. An excellent example of such extreme operating conditions is high performance machining of hard-to-cut materials. The adaptive characteristics of such coatings develop fully during interaction with the severe environment. Modern adaptive coatings could be regarded as hierarchical surface-engineered nanostructural materials. They exhibit dynamic hierarchy on two major structural scales: (a) nanoscale surface layers of protective tribofilms generated during friction and (b) an underlying nano/microscaled layer. The tribofilms are responsible for some critical nanoscale effects that strongly impact the wear resistance of adaptive coatings. A new direction in nanomaterial research is discussed: compositional and microstructural optimization of the dynamically regenerating nanoscaled tribofilms on the surface of the adaptive coatings during friction. In this review we demonstrate the correlation between the microstructure, physical, chemical and micromechanical properties of hard coatings in their dynamic interaction (adaptation) with environment and the involvement of complex natural processes associated with self-organization during friction. Major physical, chemical and mechanical characteristics of the adaptive coating, which play a significant role in its operating properties, such as enhanced mass transfer, and the ability of the layer to provide dissipation and accumulation of frictional energy during operation are presented as well. Strategies for adaptive nanostructural coating design that enhance beneficial natural processes are outlined. The coatings exhibit emergent behavior during operation when their improved features work as a whole. In this way, as higher-ordered systems, they achieve multifunctionality and high wear

Hierarchical adaptive nanostructured PVD coatings for extreme tribological applications: the quest for nonequilibrium states and emergent behavior

PubMed Central

Fox-Rabinovich, German S; Yamamoto, Kenji; Beake, Ben D; Gershman, Iosif S; Kovalev, Anatoly I; Veldhuis, Stephen C; Aguirre, Myriam H.; Dosbaeva, Goulnara; Endrino, Jose L

2012-01-01

Adaptive wear-resistant coatings produced by physical vapor deposition (PVD) are a relatively new generation of coatings which are attracting attention in the development of nanostructured materials for extreme tribological applications. An excellent example of such extreme operating conditions is high performance machining of hard-to-cut materials. The adaptive characteristics of such coatings develop fully during interaction with the severe environment. Modern adaptive coatings could be regarded as hierarchical surface-engineered nanostructural materials. They exhibit dynamic hierarchy on two major structural scales: (a) nanoscale surface layers of protective tribofilms generated during friction and (b) an underlying nano/microscaled layer. The tribofilms are responsible for some critical nanoscale effects that strongly impact the wear resistance of adaptive coatings. A new direction in nanomaterial research is discussed: compositional and microstructural optimization of the dynamically regenerating nanoscaled tribofilms on the surface of the adaptive coatings during friction. In this review we demonstrate the correlation between the microstructure, physical, chemical and micromechanical properties of hard coatings in their dynamic interaction (adaptation) with environment and the involvement of complex natural processes associated with self-organization during friction. Major physical, chemical and mechanical characteristics of the adaptive coating, which play a significant role in its operating properties, such as enhanced mass transfer, and the ability of the layer to provide dissipation and accumulation of frictional energy during operation are presented as well. Strategies for adaptive nanostructural coating design that enhance beneficial natural processes are outlined. The coatings exhibit emergent behavior during operation when their improved features work as a whole. In this way, as higher-ordered systems, they achieve multifunctionality and high wear

Structural & oxidation behavior of TiN & AlxTi1-xN coatings deposited by CA-PVD technique

NASA Astrophysics Data System (ADS)

Thorat, Nirmala; Mundotia, Rajesh; Varma, Ranjana; Kale, Ashwin; Mhatre, Umesh; Patel, Nainesh

2018-04-01

Coatings with thermal stability at elevated temperatures are prerequisite for various high speed machining and high temperature applications. The present work compares the oxidation behavior of the AlxTi1-xN coating prepared with different Al composition. Coated samples were tested at different temperatures in the range of 400 - 800 C to study their oxidation behavior. Percentage weight gain of all the samples were evaluated using high accuracy weighing balance. The depth of oxide layers were studied using Calo-test instrument. The XRD analysis was carried out to specify the phase structure. Higher oxidation rate was observed for TiN coating at all the oxidation temperatures. Oxidation rate was higher for Al13Ti87N and Al70Ti30N coatings compared to Al60Ti40N and Al50Ti50N coatings which exhibits better oxygen diffusion barrier at all the temperature.

Towards selecting the vagotomy and avoiding diarrhoea.

PubMed

Milewski, P J

1990-02-01

A retrospective review was carried out of 148 consecutive personal truncal vagotomies and anterior pylorectomies (TV + P), median follow-up 5.0 years. The recurrent ulcer rate was 6/148 (4.1%) for suspected (SRU) and 5/148 (3.4%) for proven ones (RU). This led to one death from RU. Thirty-six patients (24.3%) developed postvagotomy diarrhoea (PVD). Two of these were graded Visick IV because their occupations made PVD particularly inconvenient. These results are similar to those for TV and pyloroplasty, despite the slightly more destructive nature of pylorectomy. There were nine patients in whom evidence of associated bowel disease had been documented before or during operation. The occurrence of such evidence was significantly more frequent in the PVD group (6/36 vs. 3/112 patients, P = 0.014), suggesting either a summation of effects due to the bowel disease and the operation or that the diagnosis of PVD was sometimes incorrect. Of the six in the PVD group, two were in Visick Grade II because of their PVD, and four in Visick grade III or IV, but in one of these SRU was the main cause of the poor result, and in two the PVD was subsidiary to vomiting or dumping. One further patient in Visick III due to PVD had diverticular disease diagnosed after operation. Thus there were identifiable factors (occupation, associated bowel disorder) which could have been used to predict seven of the unsatisfactory results due partly or completely to PVD. TV + P is an effective operation for duodenal ulcer but, as with TV + pyloroplasty (though to no greater an extent), severe diarrhoea may occasionally mar the result.(ABSTRACT TRUNCATED AT 250 WORDS)

Prevalence of posterior vitreous detachment in glaucoma patients and controls.

PubMed

Schwab, Christoph; Glatz, Wilfried; Schmidt, Bernd; Lindner, Ewald; Oettl, Karl; Riedl, Regina; Wedrich, Andreas; Ivastinovic, Domagoj; Velikay-Parel, Michaela; Mossboeck, Georg

2017-05-01

To evaluate the impact of oxidative stress - present in glaucoma - on the vitreous. We therefore compare the presence of early and late stages of posterior vitreous detachment (PVD) between patients with glaucoma and controls. The vitreous state was evaluated by the combination of optical coherence tomography and ultrasound. The main outcome was the vitreous state classified into 'no PVD', 'initial PVD' and 'advanced PVD'. We evaluated the vitreous state in 48 patients with glaucoma (age: mean 66.5 ± 11.9 years; visual field deviation: mean 10.4 ± 6.8 dB) and compared the results with 101 previously investigated controls (age: mean 73.6 ± 9.3 years). After one-to-one matching on age and sex, ordinal logistic regression revealed that patients with glaucoma were significantly more likely to exhibit advanced PVD stages compared to non-glaucoma patients (OR 2.60, 95% confidence interval: 1.06-6.36, p = 0.037). Our results suggest that the presence or absence of PVD might be a valuable hint for diagnosing glaucoma - however, further research is needed to determine whether PVD can be used to supplement current glaucoma screening guidelines. © 2016 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

The decline of soil due to the pile of highway project Medan-Kualanamu (STA 35 + 901) with the finite element method

NASA Astrophysics Data System (ADS)

Hastuty, I. P.; Roesyanto; Sihite, A. B.

2018-02-01

Consolidation is the process of discharge of water from the ground through the pore cavity. Consolidation occurs in soft soil or unstable soil that allows an improvement in order to make the soil more stable. The method of using Prefabricated Vertical Drain (PVD) is one way to improve unstable soils. PVD works like a sand column that can drain water vertically. This study aims to determine the decrease, pore water pressure and soil consolidation rate with Prefabricated Vertical Drain (PVD) and without PVD analytically and using finite element method that affect the duration of soil decline to reach 90% consolidation or in other words soil does not decline anymore. Based on the analytical calculation, the decrease obtained is equal to 0.47 m meanwhile the result of calculation using finite element method is 0.45 m. The consolidation rate obtained from analytical calculation is 19 days with PVD and 115 days without PVD. The consolidation rate obtained from finite element method is 63 days with PVD and 110 days without PVD. And the pore water pressure is 0.92 KN/m2.

Psychological Treatments for Provoked Vestibulodynia: Integration of Mindfulness-Based and Cognitive Behavioral Therapies.

PubMed

Dunkley, Cara R; Brotto, Lori A

2016-07-01

Provoked vestibulodynia (PVD) is a chronic and distressing genital pain condition involving sharp pain to the vulvar vestibule with lifetime prevalence as high as 12%. PVD is the most prevalent cause of pain during sexual intercourse (dyspareunia) in premenopausal women, and gives rise to considerable sexual and relational concerns. As intercourse for women with PVD is either painful or impossible, PVD has pronounced negative effects on women's romantic relationship adjustment and sexual intimacy, as well as their emotional well-being and sense of sexual self-efficacy. Given the low efficacy and high side-effect profile of medications for the treatment of PVD, attention has shifted toward psychological interventions over the past decade. Psychological treatments for PVD have the advantage of targeting both the experience of pain and its many psychosexual consequences, such as reduced desire and arousal. Cognitive behavioral therapy (CBT) currently represents one of the most popular first-line psychological interventions for PVD. Mindfulness has been increasingly used alongside, or instead of CBT for a variety of health-related conditions, particularly with respect to chronic pain disorders and more recently in women with PVD. This review provides a detailed overview of CBT and mindfulness-based approaches in treating PVD. © 2016 Wiley Periodicals, Inc.

Role of Iron Uptake Systems in Pseudomonas aeruginosa Virulence and Airway Infection

PubMed Central

Minandri, Fabrizia; Imperi, Francesco; Frangipani, Emanuela; Bonchi, Carlo; Visaggio, Daniela; Facchini, Marcella; Pasquali, Paolo; Bragonzi, Alessandra

2016-01-01

Pseudomonas aeruginosa is a leading cause of hospital-acquired pneumonia and chronic lung infections in cystic fibrosis patients. Iron is essential for bacterial growth, and P. aeruginosa expresses multiple iron uptake systems, whose role in lung infection deserves further investigation. P. aeruginosa Fe3+ uptake systems include the pyoverdine and pyochelin siderophores and two systems for heme uptake, all of which are dependent on the TonB energy transducer. P. aeruginosa also has the FeoB transporter for Fe2+ acquisition. To assess the roles of individual iron uptake systems in P. aeruginosa lung infection, single and double deletion mutants were generated in P. aeruginosa PAO1 and characterized in vitro, using iron-poor media and human serum, and in vivo, using a mouse model of lung infection. The iron uptake-null mutant (tonB1 feoB) and the Fe3+ transport mutant (tonB1) did not grow aerobically under low-iron conditions and were avirulent in the mouse model. Conversely, the wild type and the feoB, hasR phuR (heme uptake), and pchD (pyochelin) mutants grew in vitro and caused 60 to 90% mortality in mice. The pyoverdine mutant (pvdA) and the siderophore-null mutant (pvdA pchD) grew aerobically in iron-poor media but not in human serum, and they caused low mortality in mice (10 to 20%). To differentiate the roles of pyoverdine in iron uptake and virulence regulation, a pvdA fpvR double mutant defective in pyoverdine production but expressing wild-type levels of pyoverdine-regulated virulence factors was generated. Deletion of fpvR in the pvdA background partially restored the lethal phenotype, indicating that pyoverdine contributes to the pathogenesis of P. aeruginosa lung infection by combining iron transport and virulence-inducing capabilities. PMID:27271740

Solid-State Lithium Conductors for Lithium Metal Batteries Based on Electrospun Nanofiber/Plastic Crystal Composites.

PubMed

Zhou, Yundong; Wang, Xiaoen; Zhu, Haijin; Yoshizawa-Fujita, Masahiro; Miyachi, Yukari; Armand, Michel; Forsyth, Maria; Greene, George W; Pringle, Jennifer M; Howlett, Patrick C

2017-08-10

Organic ionic plastic crystals (OIPCs) are a class of solid-state electrolytes with good thermal stability, non-flammability, non-volatility, and good electrochemical stability. When prepared in a composite with electrospun polyvinylidene fluoride (PVdF) nanofibers, a 1:1 mixture of the OIPC N-ethyl-N-methylpyrrolidinium bis(fluorosulfonyl)imide ([C 2 mpyr][FSI]) and lithium bis(fluorosulfonyl)imide (LiFSI) produced a free-standing, robust solid-state electrolyte. These high-concentration Li-containing electrolyte membranes had a transference number of 0.37(±0.02) and supported stable lithium symmetric-cell cycling at a current density of 0.13 mA cm -2 . The effect of incorporating PVdF in the Li-containing plastic crystal was investigated for different ratios of PVdF and [Li][FSI]/[C 2 mpyr][FSI]. In addition, Li|LiNi 1/3 Co 1/3 Mn 1/3 O 2 cells were prepared and cycled at ambient temperature and displayed a good rate performance and stability. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Broad visible emission from GaN nanowires grown on n-Si (1 1 1) substrate by PVD for solar cell application

NASA Astrophysics Data System (ADS)

Saron, K. M. A.; Hashim, M. R.

2013-04-01

Nanostructured gallium nitrides (GaNs) were grown on a catalyst-free Si (1 1 1) substrates using physical vapor deposition via thermal evaporation of GaN powder at 1150 °C in the absence of NH3 gas for different deposition time. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometer (EDX) results indicated that the growth of GaN nanostructure varies with deposition time. Both X-ray diffraction (XRD) patterns and Raman spectra reveals a hexagonal GaN with wurtzite structure. Photoluminescence (PL) showed that the UV emission was suppressed, and the visible band emission was enhanced with increasing deposition time. Enhancement of visible band emission from the GaN NWs is due to the increasement of deep level states, which was resulted from growth process. Current-voltage (IV) characteristics of GaN/Si heterostructure were measured and good rectifying behavior was observed for this photodiode (PD). The forward current under illumination was almost three times than that in the dark current at +5 V. Responsivity of the photodetector was 10.5 A/W at range from 350 nm to 500 nm, which rapidly increased to 13.6 A/W at 700 nm. We found that the fabricated photodiode PD has an infra-red (IR) photoresponse behavior. The analysis of optical and electrical properties indications that the grown GaN in the absent of NH3 is a promising optical material and has potential applications in photo voltage solar cell.

Contrasting effects of pyoverdine on the phytoextraction of Cu and Cd in a calcareous soil.

PubMed

Cornu, J Y; Elhabiri, M; Ferret, C; Geoffroy, V A; Jezequel, K; Leva, Y; Lollier, M; Schalk, I J; Lebeau, T

2014-05-01

Enhanced metal phytoextraction by the use of siderophore-producing bacteria (SPB) has received a lot of attention in the past decade. Bacterial siderophores are able to bind a wide range of metals other than iron and thus should enhance their phytoavailability in contaminated matrices. However, the impact of bacterial siderophores in the soil-plant transfer of metals is not yet fully elucidated, as underlined by the opposing results reported in the literature regarding the efficiency of coupling phytoextraction with bioaugmentation by SPB. The present study focuses on one bacterial siderophore, the pyoverdine (Pvd), produced by Pseudomonas aeruginosa. The coordination properties of Pvd towards Cd(II) and Cu(II) were determined and the effect of Pvd supply was assessed on (i) the mobility (CaCl2 extractions), (ii) the phytoavailability (DGT measurements) and (iii) the phytoextraction of Cd and Cu, in a calcareous soil. The stability constant of Pvd-Cu (KL'Cu=10(20.1)) was found much higher than that of Pvd-Cd (KL'Cd=10(8.2)). The major finding was the agreement observed between Pvd coordination properties and Pvd impact on metals phytoextraction. Pyoverdine, supplied at 250 μmol kg(-1) soil, enhanced the mobility, the phytoavailability and the phytoextraction of Cu while the fate of Cd was not affected. All these results were compared to those reported for chelate-assisted phytoextraction. Their relevance in using SPB for phytoremediation is discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Frequency dependence of electrical properties of polyvinylidene fluoride/graphite electrode waste/natural carbon black composite

NASA Astrophysics Data System (ADS)

Insiyanda, D. R.; Indayaningsih, N.; Prihandoko, B.; Subhan, A.; Khaerudini, D. S.; Widodo, H.; Destyorini, F.; Chaer, A.

2018-03-01

Polyvinylidene fluoride (PVdF) is a semi-crystalline thermoplastic material with remarkably high piezoelectric coefficient and an attractive polymer matrix for micro-composite with superior mechanical and electrical properties. The conductive filler is obtained from Graphite Electrode Waste (GEW) and Natural Carbon Black (NCB). The variation of composite content (%) of PVdF/NCB/GEW were 100/0/0, 95/5/0, 95/0/5, 95/2.5/2.5. This experiment employed dry dispersion method for material mixing. The materials were then moulded using hot press machine with compression parameters of P = 5.5 MPa, T = 150 °C, t = 60 minutes, A = 5×5×(0.2 - 0.4) cm3. The electrical conductivity properties of pure PVdF, as well as PVdF/GEW, PVdF/NCB, and PVdF/NCB/GEW composites were investigated in a frequency range of 100 to 100000 Hz. The PVdF/GEW sample obtained the highest electrical conductivity. It is concluded that GEW and NCB can be incorporated into PVdF as a conductive filler to increase the conductivity of conductive material composite without solvent.

Genetic and functional analysis of the bovine uterine microbiota. Part II: Purulent vaginal discharge versus healthy cows.

PubMed

Bicalho, M L S; Lima, S; Higgins, C H; Machado, V S; Lima, F S; Bicalho, R C

2017-05-01

The aim of this study was to characterize, using metagenomic shotgun DNA sequencing, the intrauterine microbial population and its predicted functional diversity within healthy cows and cows presenting purulent vaginal discharge (PVD). Twenty Holstein dairy cows from a single farm were enrolled in the study at 25 to 35 d postpartum. Purulent vaginal discharge was diagnosed by retrieving and scoring vaginal discharge using the Metricheck device (Simcro, Hamilton, New Zealand). Intrauterine samples for metagenomic analysis were collected by the cytobrush technique from 8 cows diagnosed with PVD and 12 healthy cows. Pair-end sequencing was performed using the Illumina MiSeq platform (Illumina Inc., San Diego, CA). Metagenomic sequences were analyzed using the MG-RAST server (metagenomic rapid annotations using subsystems technology; http://metagenomics.anl.gov/), and the STAMP software (http://kiwi.cs.dal.ca/Software/STAMP) was used to study statistically significant differential abundance of taxonomic and functional features between the 2 metagenomes. Additionally, the total number of bacterial 16S rDNA copies was estimated by real-time PCR. Taxonomic analysis revealed that Bacteroidetes was the most abundant phylum in the uterine microbiota from cows with PVD, and Fusobacteria was almost completely absent in the healthy uterine microbiota. Moreover, species belonging to the genus Trueperella were present only in the uterine microbiota of PVD cows. The increased abundance of Fusobacteria and the unique presence of Trueperella in the PVD cows highlight the important role of these bacteria in the pathogenesis of PVD. Genes encoding cytolethal distending toxin were exclusive to the microbiota of PVD cows. Similarly, genes associated with lipid A modification were present only in samples from PVD cows; such modification is associated with greater resistance to cationic antimicrobial peptides. Conversely, genes encoding bacteriocins and ribosomally antibacterial peptide

Assessment of a User Guide for One Semi-Automated Forces (OneSAF) Version 2.0

DTIC Science & Technology

2009-09-01

OneSAF uses a two-dimensional feature named a Plan View Display ( PVD ) as the primary graphical interface. The PVD replicates a map with a series...primary interface, the PVD is how the user watches the scenario unfold and requires the most interaction with the user. As seen in Table 3, all...participant indicated never using these seven map-related functions. Graphic control measures. Graphic control measures are applied to the PVD map to

Stability, frequency and multiplicity of transposon insertions in the pyoverdine region in the chromosomes of different fluorescent pseudomonads.

PubMed

Cornelis, P; Anjaiah, V; Koedam, N; Delfosse, P; Jacques, P; Thonart, P; Neirinckx, L

1992-07-01

Tn5 mutagenesis of different fluorescent pseudomonads was achieved by conjugational transfer of the suicide vector pSUP 10141. Pyoverdine negative (Pvd-) mutants were detected by the absence of fluorescence on King's B medium and by their inability to grow in the presence of the iron chelator EDDHA [ethylenediamine di(o-hydroxyphenylacetic acid)]. In P. fluorescens ATCC 17400 and three rhizosphere isolates (one P. putida and two P. fluorescens), the percentage of Pvd- mutants ranged between 0 and 0.54%. In a P. chlororaphis rhizosphere isolate, this percentage was higher (4%). In these mutants both of the Tn5 antibiotic resistances (Km and Tc) were stable and the transposon could be detected by hybridization. In Pvd- mutants of P. fluorescens ATCC 17400, the transposon was found to be inserted twice in the chromosome while single insertions were detected in the DNA of other, randomly tested mutants. In P. aeruginosa PAO1, where 13.1% of the mutants were Pvd-, both antibiotic resistances were rapidly lost and accordingly no transposon insertion could be detected by hybridization. However, the Pvd- phenotype was generally stable in these mutants. The plasmid pNK862 containing a mini-Tn10 transposon was introduced by electroporation into P. aeruginosa PAO1 and Kmr mutants were recovered, 89% of which were Pvd- and confirmed to be P. aeruginosa by PCR amplification of the P. aeruginosa lipoprotein gene. The mini-Tn10 insertions were also found to be unstable in PAO1.

Role of TonB1 in pyoverdine-mediated signaling in Pseudomonas aeruginosa.

PubMed

Shirley, Matt; Lamont, Iain L

2009-09-01

Pyoverdines are siderophores secreted by Pseudomonas aeruginosa. Uptake of ferripyoverdine in P. aeruginosa PAO1 occurs via the FpvA receptor protein and requires the energy-transducing protein TonB1. Interaction of (ferri)pyoverdine with FpvA activates pyoverdine gene expression in a signaling process involving the cytoplasmic-membrane-spanning anti-sigma factor FpvR and the sigma factor PvdS. Here, we show that mutation of a region of FpvA that interacts with TonB1 (the TonB box) prevents this signaling process, as well as inhibiting bacterial growth in the presence of the iron-chelating compound ethylenediamine-di(o-hydroxy-phenylacetic acid). Signaling via wild-type FpvA was also eliminated in strains lacking TonB1 but was unaffected in strains lacking either (or both) of two other TonB proteins in P. aeruginosa, TonB2 and TonB3. An absence of pyoverdine-mediated signaling corresponded with proteolysis of PvdS. These data show that interactions between FpvA and TonB1 are required for (ferri)pyoverdine signal transduction, as well as for ferripyoverdine transport, consistent with a mechanistic link between the signaling and transport functions of FpvA.

Comparison of vapor concentrations of volatile organic compounds with ground-water concentrations of selected contaminants in sediments beneath the Sudbury River, Ashland, Massachusetts, 2000

USGS Publications Warehouse

Campbell, J.P.; Lyford, F.P.; Willey, Richard E.

2002-01-01

A mixed plume of contaminants in ground water, including volatile organic compounds (VOCs), semi-volatile organic compounds (SVOCs), and metals, near the former Nyanza property in Ashland, Massachusetts, discharges to the Sudbury River upstream and downstream of Mill Pond and a former mill raceway. Polyethylene-membrane vapor-diffusion (PVD) samplers were installed in river-bottom sediments to determine if PVD samplers provide an alternative to ground-water sampling from well points for identifying areas of detectable concentrations of contaminants in sediment pore water near the ground-water and surface-water interface. In August and September 2000, the PVD samplers were installed near well points at depths of 8 to 12 inches in both fine and coarse sediments, whereas the well points were installed at depths of 1 to 5 feet in coarse sediments only. Comparison between vapor and water samples at 29 locations upstream from Mill Pond show that VOC vapor concentrations from PVD samplers in coarse river-bottom sediments are more likely to correspond to ground-water concentrations from well points than PVD samplers installed in fine sediments. Significant correlations based on Kendall's Tau were shown between vapor and ground-water concentrations for trichloroethylene and chlorobenzene for PVD samplers installed in coarse sediments where the fine organic layer that separated the two sampling depths was 1 foot or less in thickness. VOC concentrations from vapor samples also were compared to VOC, SVOC, and metals concentrations from ground-water samples at 10 well points installed upstream and downstream from Mill Pond, and in the former mill raceway. Chlorobenzene vapor concentrations correlated significantly with ground-water concentrations for 5 VOCs, 2 SVOCs, and 10 metals. Trichloroethylene vapor concentrations did not correlate with any of the other ground-water constituents analyzed at the 10 well points. Chlorobenzene detected by use of PVD samplers appears to be a

Disease-Related Microstructural Differences in the Brain in Women With Provoked Vestibulodynia.

PubMed

Gupta, Arpana; Woodworth, Davis C; Ellingson, Benjamin M; Rapkin, Andrea J; Naliboff, Bruce; Kilpatrick, Lisa A; Stains, Jean; Masghati, Salome; Tillisch, Kirsten; Mayer, Emeran A; Labus, Jennifer S

2018-05-01

Provoked vestibulodynia (PVD) is a chronic pelvic pain disorder affecting 16% of the female population. Neuroimaging studies have highlighted central abnormalities in PVD, similar to other chronic pelvic pain disorders, including brain regions involved in sensory processing and modulation of pain. The aim of the study was to determine alterations in the subvoxel, microstructural organization within tissues in PVD compared with healthy control participants (HCs) and a disease control group (irritable bowel syndrome [IBS]). Diffusion tensor imaging magnetic resonance imaging was conducted in 87 age-matched premenopausal women (29 PVD, 29 HCs, 29 IBS). Statistical parameter mapping of fractional anisotropy (FA) and mean diffusivity (MD) maps were used to identify microstructural difference in the brain specific to PVD or shared with IBS. PVD alterations in microstructural organization of the brain were predominantly observed in fibers associated with sensorimotor integration and pain processing that relay information between the thalamus, basal ganglia, sensorimotor, and insular cortex. PVD, compared with HCs, showed extensive increases in the FA of somatosensory and basal ganglia regions. In contrast, PVD and IBS subjects did not show any FA-related group differences. PVD subjects showed greater MD in the basal ganglia compared with HCs (higher MD in the internal capsule and pallidum) and IBS (higher MD in the putamen and pallidum). Increases in MD were associated with increased vaginal muscle tenderness and vulvar pain. The current findings highlight possible shared mechanisms between 2 different pelvic pain disorders, but also highlight the widespread alterations observed specifically in PVD compared with HCs. Alterations in microstructure in PVD were observed in fibers associated with sensorimotor integration and pain processing, which were also associated with increased vaginal muscle tenderness and vulvar pain. These alterations may be contributing to increased

Thermal barrier coating life prediction model development, phase 2

NASA Technical Reports Server (NTRS)

Meier, Susan Manning; Sheffler, Keith D.; Nissley, David M.

1991-01-01

The objective of this program was to generate a life prediction model for electron-beam-physical vapor deposited (EB-PVD) zirconia thermal barrier coating (TBC) on gas turbine engine components. Specific activities involved in development of the EB-PVD life prediction model included measurement of EB-PVD ceramic physical and mechanical properties and adherence strength, measurement of the thermally grown oxide (TGO) growth kinetics, generation of quantitative cyclic thermal spallation life data, and development of a spallation life prediction model. Life data useful for model development was obtained by exposing instrumented, EB-PVD ceramic coated cylindrical specimens in a jet fueled burner rig. Monotonic compression and tensile mechanical tests and physical property tests were conducted to obtain the EB-PVD ceramic behavior required for burner rig specimen analysis. As part of that effort, a nonlinear constitutive model was developed for the EB-PVD ceramic. Spallation failure of the EB-PVD TBC system consistently occurred at the TGO-metal interface. Calculated out-of-plane stresses were a small fraction of that required to statically fail the TGO. Thus, EB-PVD spallation was attributed to the interfacial cracking caused by in-plane TGO strains. Since TGO mechanical properties were not measured in this program, calculation of the burner rig specimen TGO in-plane strains was performed by using alumina properties. A life model based on maximum in-plane TGO tensile mechanical strain and TGO thickness correlated the burner rig specimen EB-PVD ceramic spallation lives within a factor of about plus or minus 2X.

Effect of pyoverdine supply on cadmium and nickel complexation and phytoavailability in hydroponics.

PubMed

Ferret, C; Cornu, J Y; Elhabiri, M; Sterckeman, T; Braud, A; Jezequel, K; Lollier, M; Lebeau, T; Schalk, I J; Geoffroy, V A

2015-02-01

Siderophores are chelators with a high selectivity for Fe(III) and a good affinity for divalent metals, including Cd(II) and Ni(II). Inoculation with siderophore-producing bacteria (SPB) has thus been proposed as an alternative to chelator supply in phytoremediation. Accurate assessments of the potential of this association require a dissection of the interaction of siderophores with metals at the soil-root interface. This study focuses on pyoverdine (Pvd), the main siderophore produced by Pseudomonas aeruginosa. We first assessed the ability of Pvd to coordinate Ni(II). The stability constant of Pvd-Ni(II) (log K (L'Ni) = 10.9) was found to be higher than that of Pvd-Cd(II) (log K (L'Cd) = 8.2). We then investigated the effect of a direct supply of Pvd on the mobilization, speciation, and phytoavailability of Cd and Ni in hydroponics. When supplied at a concentration of 50 μM, Pvd selectively promoted Ni mobilization from smectite. It decreased plant Ni and Cd contents and the free ionic fractions of these two metals, consistent with the free ion activity model. Pvd had a more pronounced effect for Ni than for Cd, as predicted from its coordination properties. Inoculation with P. aeruginosa had a similar effect on Ni phytoavailability to the direct supply of Pvd.

Ability and efficiency of an automatic analysis software to measure microvascular parameters.

PubMed

Carsetti, Andrea; Aya, Hollmann D; Pierantozzi, Silvia; Bazurro, Simone; Donati, Abele; Rhodes, Andrew; Cecconi, Maurizio

2017-08-01

Analysis of the microcirculation is currently performed offline, is time consuming and operator dependent. The aim of this study was to assess the ability and efficiency of the automatic analysis software CytoCamTools 1.7.12 (CC) to measure microvascular parameters in comparison with Automated Vascular Analysis (AVA) software 3.2. 22 patients admitted to the cardiothoracic intensive care unit following cardiac surgery were prospectively enrolled. Sublingual microcirculatory videos were analysed using AVA and CC software. The total vessel density (TVD) for small vessels, perfused vessel density (PVD) and proportion of perfused vessels (PPV) were calculated. Blood flow was assessed using the microvascular flow index (MFI) for AVA software and the averaged perfused speed indicator (APSI) for the CC software. The duration of the analysis was also recorded. Eighty-four videos from 22 patients were analysed. The bias between TVD-CC and TVD-AVA was 2.20 mm/mm 2 (95 % CI 1.37-3.03) with limits of agreement (LOA) of -4.39 (95 % CI -5.66 to -3.16) and 8.79 (95 % CI 7.50-10.01) mm/mm 2 . The percentage error (PE) for TVD was ±32.2 %. TVD was positively correlated between CC and AVA (r = 0.74, p < 0.001). The bias between PVD-CC and PVD-AVA was 6.54 mm/mm 2 (95 % CI 5.60-7.48) with LOA of -4.25 (95 % CI -8.48 to -0.02) and 17.34 (95 % CI 13.11-21.57) mm/mm 2 . The PE for PVD was ±61.2 %. PVD was positively correlated between CC and AVA (r = 0.66, p < 0.001). The median PPV-AVA was significantly higher than the median PPV-CC [97.39 % (95.25, 100 %) vs. 81.65 % (61.97, 88.99), p < 0.0001]. MFI categories cannot estimate or predict APSI values (p = 0.45). The time required for the analysis was shorter with CC than with AVA system [2'42″ (2'12″, 3'31″) vs. 16'12″ (13'38″, 17'57″), p < 0.001]. TVD is comparable between the two softwares, although faster with CC software. The values for PVD and PPV are not interchangeable given the

Oleophobic optical coating deposited by magnetron PVD

NASA Astrophysics Data System (ADS)

Bernt, D.; Ponomarenko, V.; Pisarev, A.

2016-09-01

Thin oxinitride films of Zn-Sn-O-N and Si-Al-O-N were deposited on glass by reactive magnetron sputtering at various nitrogen-to-oxygen ratios. Nitrogen added to oxygen led to decrease of the surface roughness and increase of oleophobic properties studied by the oil-drop test. The best oleophobity was obtained for Zn-Sn-O-N oxinitride at Zn:Sn=1:1 and N:O=1:2. Improved oleophobic properties were also demonstrated if the oxinitride film was deposited on top of the multilayer coating as the final step in the industrial cycle of production of energy efficient glass.

P-channel transparent thin-film transistor using physical-vapor-deposited NiO layer

NASA Astrophysics Data System (ADS)

Lin, Chiung-Wei; Chung, Wei-Chieh; Zhang, Zhao-De; Hsu, Ming-Chih

2018-01-01

The effect of oxygen (O) content on the electrical properties of physical-vapor-deposited nickel oxide (PVD-NiO) was studied. When the NiO target was sputtered, introducing O2 can lead to the formation of Ni3+ ions in the deposited film. These Ni3+ ions can act as acceptors. However, there were too many Ni3+ ions that were obtained following the introduction of O atoms. It resulted in intensive p-type conduction and made the O2-introduced PVD-NiO behave as a conductor. Thus, it was possible to reduce the O content of PVD-NiO to obtain a p-type semiconductor. In this study, a transparent PVD-NiO film with a carrier concentration of 1.62 × 1017 cm-3 and a resistivity of 3.74 Ω cm was sputter-deposited within pure argon plasma. The thin-film transistor (TFT) employing this proposed PVD-NiO can result in good current switching, and even operated at very low drain-source voltage. The ON/OFF current ratio, field-effect carrier mobility, and threshold voltage of the proposed NiO TFT were 3.61 × 104, 1.09 cm2 V-1 s-1 and -3.31 V, respectively.

Experiments on the contact angle of n-propanol on differently prepared silver substrates at various temperatures and implications for the properties of silver nanoparticles

NASA Astrophysics Data System (ADS)

Pinterich, T.; Winkler, P. M.; Vrtala, A. E.; Wagner, P. E.

2011-08-01

In this paper we present the results of contact angle measurements between n-propanol and silver substrates in the temperature range from -10 °C to 30 °C. The interest in a potential temperature dependence of contact angles originates from recent experiments by S. Schobesberger et al. (Schobesberger S., Strange temperature dependence observed for heterogeneous nucleation of n-propanol vapor on NaCl particles. Master's thesis, University of Vienna, 2008; Schobesberger S. et al., Experiments on the temperature dependence of heterogeneous nucleation on NaCl and Ag particles. In preparation.) investigating the temperature dependence for heterogeneous nucleation of n-propanol vapour on NaCl and on silver particles. We determined dynamic advancing θ a and receding θ r angles on variously prepared silver probes. The Dynamic Wilhelmy method (Wilhelmy L., Über die Abhängigkeit der Capillaritäts-Constanten des Alkohols von Substanz und Gestalt des benetzten festen Körpers. Ann. Phys. Chem., 199:177-217, 1863) was applied using a Krüss K12 Tensiometer, with a refrigerated double-walled glass top. With respect to its potential influence on heterogeneous nucleation mainly the advancing angle is of interest. The uniform probe geometry required was achieved by accurate cutting and by multiple polishing stages up to the accomplishment of a 0.04 μm grain size. The original probes consist of 925 sterling silver including a 7.5% copper content. Additional coating with silver pro Analysi (p.A.) was applied making use of pure silver powder evaporation process via Physical Vapour Deposition (PVD). Results show that a surface contamination by copper cannot be neglected for the specification of contact angles. It turned out that additional PVD coatings not only change the values of θa but also their temperature dependence. With increasing the number of coatings of a plate the contact angle decreases and its temperature dependence inverts. Since the contact angle hysteresis �

Development of dye-sensitized solar cells composed of liquid crystal embedded, electrospun poly(vinylidene fluoride-co-hexafluoropropylene) nanofibers as polymer gel electrolytes.

PubMed

Ahn, Sung Kwang; Ban, Taewon; Sakthivel, P; Lee, Jae Wook; Gal, Yeong-Soon; Lee, Jin-Kook; Kim, Mi-Ra; Jin, Sung-Ho

2012-04-01

In order to overcome the problems associated with the use of liquid electrolytes in dye-sensitized solar cells (DSSCs), a new system composed of liquid crystal embedded, polymer electrolytes has been developed. For this purpose, three types of DSSCs have been fabricated. The cells contain electrospun poly(vinylidene fluoride-co-hexafluoropropylene) (e-PVdF-co-HFP) polymer gel electrolyte, with and without doping with the liquid crystal E7 and with a liquid electrolyte. The morphologies of the newly prepared DSSCs were explored using field emission scanning electron microscopy (FE-SEM). Analysis of the FE-SEM images indicate that the DSSC composed of E7 embedded on e-PVdF-co-HFP polymer gel electrolyte has a greatly regular morphology with an average diameter. The ionic conductivity of E7 embedded on e-PVdF-co-HFP polymer gel electrolyte was found to be 2.9 × 10(-3) S/cm at room temperature, a value that is 37% higher than that of e-PVdF-co-HFP polymer gel electrolyte. The DCCS containing the E7 embedded, e-PVdF-co-HFP polymer gel electrolyte was observed to possess a much higher power conversion efficiency (PCE = 6.82%) than that of an e-PVdF-co-HFP nanofiber (6.35%). In addition, DSSCs parameters of the E7 embedded, e-PVdF-co-HFP polymer gel electrolyte (V(oc) = 0.72 V, J(sc) = 14.62 mA/cm(2), FF = 64.8%, and PCE = 6.82% at 1 sun intensity) are comparable to those of a liquid electrolyte (V(oc) = 0.75 V, J(sc) = 14.71 mA/cm(2), FF = 64.9%, and PCE = 7.17%, both at a 1 sun intensity).

Influence of Hydrogen Bonding on the Kinetic Stability of Vapor Deposited Glasses of Triazine Derivatives

DOE Data Explorer

Laventure, Audrey [Departement de chimie, Universite de Montreal, C.P. 6128, Succ. Centre-Ville, Montreal, Quebec H3C 3J7, Canada] (ORCID:0000000208670231); Gujral, Ankit [Department of Chemistry, University of Wisconsin-Madison, Madison, Wisconsin 53706, United States] (ORCID:0000000250652694); Lebel, Olivier [Department of Chemistry and Chemical Engineering, Royal Military College of Canada, Kingston, Ontario K7K 7B4] (ORCID:0000000217376843); Ediger, Mark [Department of Chemistry, University of Wisconsin-Madison, Madison, Wisconsin 53706, United States] (ORCID:0000000347158473); Pellerin, Christian [Departement de chimie, Universite de Montreal, C.P. 6128, Succ. Centre-Ville, Montreal, Quebec H3C 3J7, Canada] (ORCID:0000000161441318)

2017-02-01

It has recently been established that physical vapor deposition (PVD) can produce organic glasses with enhanced kinetic stability, high density, and anisotropic packing, with the substrate temperature during deposition (Tsubstrate) as the key control parameter. The influence of hydrogen bonding on the formation of PVD glasses has not been fully explored. Herein, we use a high-throughput preparation method to vapor-deposit three triazine derivatives over a wide range of Tsubstrate, from 0.69 to 1.08Tg, where Tg is the glass transition temperature. These model systems are structural analogues containing a functional group with different H-bonding capability at the 2-position of a triazine ring: (1) 2-methylamino-4,6-bis(3,5-dimethyl-phenylamino)-1,3,5-triazine (NHMe) (H-bond donor), (2) 2-methoxy-4,6-bis(3,5-dimethyl-phenylamino)-1,3,5-triazine (OMe) (H-bond acceptor), and (3) 2-ethyl-4,6-bis(3,5-dimethyl-phenylamino)-1,3,5-triazine (Et) (none). Using spectroscopic ellipsometry, we find that the Et and OMe compounds form PVD glasses with relatively high kinetic stability, with the transformation time (scaled by the α-relaxation time) on the order of 103, comparable to other highly stable glasses formed by PVD. In contrast, PVD glasses of NHMe are only slightly more stable than the corresponding liquid-cooled glass. Using IR spectroscopy, we find that both the supercooled liquid and the PVD glasses of the NHMe derivative show a higher average number of bonded NH per molecule than that in the other two compounds. These results suggest that H-bonds hinder the formation of stable glasses, perhaps by limiting the surface mobility. Interestingly, despite this difference in kinetic stability, all three compounds show properties typically observed in highly stable glasses prepared by PVD, including a higher density and anisotropic molecular packing (as characterized by IR and wide-angle X-ray scattering).

NH3-free growth of GaN nanostructure on n-Si (1 1 1) substrate using a conventional thermal evaporation technique

NASA Astrophysics Data System (ADS)

Saron, K. M. A.; Hashim, M. R.; Farrukh, M. A.

2012-06-01

We have investigated the influence of carrier gas on grown gallium nitride (GaN) epitaxial layers deposited on n-Si (1 1 1) by a physical vapour deposition (PVD) via thermal evaporation of GaN powder at 1150 °C. The GaN nanostructures were grown at a temperature of 1050 °C for 60 min under various gases (N2, H2 mixed with N2, and Ar2) with absence of NH3. The morphology, structure, and optical properties (SEM) images showed that the morphology of GaN displayed various shapes of nanostructured depending on the type of carrier gas. X-ray diffraction (XRD) pattern showed that the GaN polycrystalline reveals a wurtzite-hexagonal structure with [0 0 1] crystal orientation. Raman spectra exhibited a red shift in peaks of E2 (high) as a result of tensile stress. Photoluminescence (PL) measurements showed two band emissions aside from the UV emission. The ultraviolet band gap of GaN nanostructure displayed a red shift as compared with the bulk GaN; this might be attributed to an increase in the defect and stress present in the GaN nanostructure. In addition, the observed blue and green-yellow emissions indicated defects due to the N vacancy and C impurity of the supplied gas. These results clearly indicated that the carrier gas, similar to the growth temperature, is one of the important parameters to control the quality of thermal evaporation (TE)-GaN epilayers.

Effect of Pseudomonas fluorescens and pyoverdine on the phytoextraction of cesium by red clover in soil pots and hydroponics.

PubMed

Hazotte, Alice; Péron, Olivier; Gaudin, Pierre; Abdelouas, Abdesselam; Lebeau, Thierry

2018-05-12

With the aim of improving the phytoextraction rate of cesium (Cs), the effect of Pseudomonas fluorescens ATCC 17400 and its siderophore pyoverdine (PVD) on the uptake of Cs by red clover was studied in soil pots. This work also provides a mechanistic understanding of the Cs-bacteria (or PVD)-illite-plant interactions by using a simplified experimental design, i.e., hydroponics with either Cs in solution or Cs-spiked illite in suspension. For soil spiked with 11.2 mmol kg -1 (1480 mg kg -1 ) of Cs, 0.43% of total Cs was taken up by red clover in 12 days (119 μmol g -1 (16 mg g -1 ) of Cs dry matter in roots and 40 μmol g -1 (5 mg g -1 ) in shoots). In hydroponics with Cs in solution (0.1 mmol L -1 or 13 mg L -1 ), 75% of Cs was taken up vs. only 0.86% with Cs-spiked illite suspension. P. fluorescens and PVD did not increase Cs concentrations in aboveground parts and roots of red clover and even decreased them. The damaging effect of PVD on red clover growth was demonstrated with the biomass yielding 66% of the control in soil pots (and 100% mortality after 12 days of exposition) and only 56% in hydroponics (78% with illite in suspension). Nonetheless, PVD and, to a lesser extent, P. fluorescens increased the translocation factor up to a factor of 2.8. This study clearly showed a direct damaging effect of PVD and to a lower extent the retention of Cs by biofilm covering both the roots and illite, both resulting in the lower phytoextraction efficiency.

Role of TonB1 in Pyoverdine-Mediated Signaling in Pseudomonas aeruginosa▿

PubMed Central

Shirley, Matt; Lamont, Iain L.

2009-01-01

Pyoverdines are siderophores secreted by Pseudomonas aeruginosa. Uptake of ferripyoverdine in P. aeruginosa PAO1 occurs via the FpvA receptor protein and requires the energy-transducing protein TonB1. Interaction of (ferri)pyoverdine with FpvA activates pyoverdine gene expression in a signaling process involving the cytoplasmic-membrane-spanning anti-sigma factor FpvR and the sigma factor PvdS. Here, we show that mutation of a region of FpvA that interacts with TonB1 (the TonB box) prevents this signaling process, as well as inhibiting bacterial growth in the presence of the iron-chelating compound ethylenediamine-di(o-hydroxy-phenylacetic acid). Signaling via wild-type FpvA was also eliminated in strains lacking TonB1 but was unaffected in strains lacking either (or both) of two other TonB proteins in P. aeruginosa, TonB2 and TonB3. An absence of pyoverdine-mediated signaling corresponded with proteolysis of PvdS. These data show that interactions between FpvA and TonB1 are required for (ferri)pyoverdine signal transduction, as well as for ferripyoverdine transport, consistent with a mechanistic link between the signaling and transport functions of FpvA. PMID:19592589

Can Fear, Pain, and Muscle Tension Discriminate Vaginismus from Dyspareunia/Provoked Vestibulodynia? Implications for the New DSM-5 Diagnosis of Genito-Pelvic Pain/Penetration Disorder.

PubMed

Lahaie, Marie-Andrée; Amsel, Rhonda; Khalifé, Samir; Boyer, Stephanie; Faaborg-Andersen, Marie; Binik, Yitzchak M

2015-08-01

Fear has been suggested as the crucial diagnostic variable that may distinguish vaginismus from dyspareunia. Unfortunately, this has not been systematically investigated. The primary purpose of this study, therefore, was to investigate whether fear as evaluated by subjective, behavioral, and psychophysiological measures could differentiate women with vaginismus from those with dyspareunia/provoked vestibulodynia (PVD) and controls. A second aim was to re-examine whether genital pain and pelvic floor muscle tension differed between vaginismus and dyspareunia/PVD sufferers. Fifty women with vaginismus, 50 women with dyspareunia/PVD, and 43 controls participated in an experimental session comprising a structured interview, pain sensitivity testing, a filmed gynecological examination, and several self-report measures. Results demonstrated that fear and vaginal muscle tension were significantly greater in the vaginismus group as compared to the dyspareunia/PVD and no-pain control groups. Moreover, behavioral measures of fear and vaginal muscle tension were found to discriminate the vaginismus group from the dyspareunia/PVD and no-pain control groups. Genital pain did not differ significantly between the vaginismus and dyspareunia/PVD groups; however, genital pain was found to discriminate both clinical groups from controls. Despite significant statistical differences on fear and vaginal muscle tension variables between women suffering from vaginismus and dyspareunia/PVD, a large overlap was observed between these conditions. These findings may explain the great difficulty health professionals experience in attempting to reliably differentiate vaginismus from dyspareunia/PVD. The implications of these data for the new DSM-5 diagnosis of Genito-Pelvic Pain/Penetration Disorder are discussed.

Characterization of Beryllium Windows for Coherent X-ray Optics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goto, Shunji; Yabashi, Makina; Tamasaku, Kenji

2007-01-19

Beryllium foils fabricated by several processes were characterized using spatially coherent x rays at 1-km beamline of SPring-8. By thickness dependence of bright x-ray spot density due to Fresnel diffraction from several-micron deficiencies, we found that speckles (bright x-ray spots) were due to voids with densities 103-104 mm-3 in powder foils and ingot foils. Compared with powder and ingot foils, a polished physical-vapor-deposited (PVD) beryllium foil gave highly uniform beams with no speckles. The PVD process eliminates the internal voids in principle and the PVD foil is the best for coherent x-ray applications.

Impact of educational seminars on women with provoked vestibulodynia.

PubMed

Brotto, Lori A; Sadownik, Leslie; Thomson, Sydney

2010-02-01

Provoked vestibulodynia (PVD) is a common genital pain condition characterized by severe pain upon vaginal penetration. The treatment of women with PVD suggests variable efficacy across modalities. The emotional toll of PVD, because of the intimate and interpersonal nature of this sexually-provoked pain, and the relationship between PVD and anxiety, depression, and a host of subclinical emotional symptoms that may interfere with treatment, has been well documented. The role of the gynaecologist in identifying and managing these psychological symptoms has never been addressed. The goal of this study was to examine the efficacy of a brief, gynaecologist-led educational seminar on measures of psychological symptoms and sexual health. Twenty-nine women with PVD participated in three one-hour educational seminars led by a gynaecologist with expertise in the management of PVD. Participants completed questionnaires before, immediately after, and six months after the third session. There were significant improvements in psychological symptoms of depression, anxiety, somatization, hostility, paranoid ideation, psychoticism, and the global severity index, both immediately post-seminar and at the six-month follow-up. Sexual arousal, orgasm, overall sexual function, and sexual distress also significantly improved in response to the seminars. Gynaecologist-led educational seminars delivered in a group format have a significant positive impact on psychological symptoms and sexual functioning in women who suffer from PVD.

Transcutaneous electrical nerve stimulation as an additional treatment for women suffering from therapy-resistant provoked vestibulodynia: a feasibility study.

PubMed

Vallinga, Marleen S; Spoelstra, Symen K; Hemel, Inge L M; van de Wiel, Harry B M; Weijmar Schultz, Willibrord C M

2015-01-01

The current approach to women with provoked vestibulodynia (PVD) comprises a multidimensional, multidisciplinary therapeutic protocol. As PVD is considered to be a chronic pain disorder, transcutaneous electrical nerve stimulation (TENS) can be used as an additional therapy for women with otherwise therapy-resistant PVD. The aims of this study were to evaluate whether TENS has a beneficial effect on vulvar pain, sexual functioning, and sexually-related personal distress in women with therapy-resistant PVD and to assess the effect of TENS on the need for vestibulectomy. A longitudinal prospective follow-up study was performed on women with therapy-resistant PVD who received additional domiciliary TENS. Self-report questionnaires and visual analog scales (VASs) were completed at baseline (T1), post-TENS (T2), and follow-up (T3). Vulvar pain, sexual functioning, and sexually-related personal distress were the main outcome measures. Thirty-nine women with therapy-resistant PVD were included. Mean age was 27 ± 5.6 years (range: 19 to 41); mean duration between TENS and T3 follow-up was 10.1 ± 10.7 months (range: 2 to 32). Vulvar pain VAS scores directly post-TENS (median 3.4) and at follow-up (median 3.2) were significantly (P < 0.01) lower than at baseline (median 8.0). Post-TENS, sexual functioning scores on the Female Sexual Functioning Index questionnaire had improved significantly (P = 0.2); these scores remained stable at follow-up. Sexually-related personal distress scores had improved significantly post-TENS (P = 0.01). Only 4% of the women who received TENS needed to undergo vestibulectomy vs. 23% in our previous patient population. The addition of self-administered TENS to multidimensional treatment significantly reduced the level of vulvar pain and the need for vestibulectomy. The long-term effect was stable. These results not only support our hypothesis that TENS constitutes a feasible and beneficial addition to multidimensional

Physical vapor deposited thin films of lignins extracted from sugar cane bagasse: morphology, electrical properties, and sensing applications.

PubMed

Volpati, Diogo; Machado, Aislan D; Olivati, Clarissa A; Alves, Neri; Curvelo, Antonio A S; Pasquini, Daniel; Constantino, Carlos J L

2011-09-12

The concern related to the environmental degradation and to the exhaustion of natural resources has induced the research on biodegradable materials obtained from renewable sources, which involves fundamental properties and general application. In this context, we have fabricated thin films of lignins, which were extracted from sugar cane bagasse via modified organosolv process using ethanol as organic solvent. The films were made using the vacuum thermal evaporation technique (PVD, physical vapor deposition) grown up to 120 nm. The main objective was to explore basic properties such as electrical and surface morphology and the sensing performance of these lignins as transducers. The PVD film growth was monitored via ultraviolet-visible (UV-vis) absorption spectroscopy and quartz crystal microbalance, revealing a linear relationship between absorbance and film thickness. The 120 nm lignin PVD film morphology presented small aggregates spread all over the film surface on the nanometer scale (atomic force microscopy, AFM) and homogeneous on the micrometer scale (optical microscopy). The PVD films were deposited onto Au interdigitated electrode (IDE) for both electrical characterization and sensing experiments. In the case of electrical characterization, current versus voltage (I vs V) dc measurements were carried out for the Au IDE coated with 120 nm lignin PVD film, leading to a conductivity of 3.6 × 10(-10) S/m. Using impedance spectroscopy, also for the Au IDE coated with the 120 nm lignin PVD film, dielectric constant of 8.0, tan δ of 3.9 × 10(-3), and conductivity of 1.75 × 10(-9) S/m were calculated at 1 kHz. As a proof-of-principle, the application of these lignins as transducers in sensing devices was monitored by both impedance spectroscopy (capacitance vs frequency) and I versus time dc measurements toward aniline vapor (saturated atmosphere). The electrical responses showed that the sensing units are sensible to aniline vapor with the process being

Regional vascular density-visual field sensitivity relationship in glaucoma according to disease severity.

PubMed

Shin, Joong Won; Lee, Jiyun; Kwon, Junki; Choi, Jaewan; Kook, Michael S

2017-12-01

To study whether there are global and regional relationships between peripapillary vascular density (pVD) assessed by optical coherence tomography angiography (OCT-A) and visual field (VF) mean sensitivity at different glaucoma stages. Microvascular images and peripapillary retinal nerve fibre layer (pRNFL) thicknesses were obtained using a Cirrus OCT-A device in 91 glaucoma subjects. The pVD was measured at various spatial locations according to the Garway-Heath map, using a MATLAB software (The MathWorks, Natick, Massachusetts). VF mean sensitivity (VFMS) was recorded in the 1/L scale. Global and regional vasculature-function (pVD vs VFMS) relationships were assessed in separate patient groups at mild and moderate-to-advanced stages of glaucoma. The pVDs at superotemporal and inferotemporal regions were significantly associated with corresponding VFMS in mild glaucoma (p<0.05). In moderate-to-advanced glaucoma, there were significant associations between pVD and VFMS, regardless of location. The association between global pVD and VFMS was significantly stronger than that between global pRNFL thickness and VFMS in moderate-to-advanced stage glaucoma (p <0.05). Global and regional pVD measured by OCT-A was significantly associated with corresponding VFMS in moderate-to-advanced glaucoma. OCT-A may be useful in monitoring glaucoma at various stages. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Separate transcriptionally regulated pathways specify distinct classes of sister dendrites in a nociceptive neuron.

PubMed

O'Brien, Barbara M J; Palumbos, Sierra D; Novakovic, Michaela; Shang, Xueying; Sundararajan, Lakshmi; Miller, David M

2017-12-15

The dendritic processes of nociceptive neurons transduce external signals into neurochemical cues that alert the organism to potentially damaging stimuli. The receptive field for each sensory neuron is defined by its dendritic arbor, but the mechanisms that shape dendritic architecture are incompletely understood. Using the model nociceptor, the PVD neuron in C. elegans, we determined that two types of PVD lateral branches project along the dorsal/ventral axis to generate the PVD dendritic arbor: (1) Pioneer dendrites that adhere to the epidermis, and (2) Commissural dendrites that fasciculate with circumferential motor neuron processes. Previous reports have shown that the LIM homeodomain transcription factor MEC-3 is required for all higher order PVD branching and that one of its targets, the claudin-like membrane protein HPO-30, preferentially promotes outgrowth of pioneer branches. Here, we show that another MEC-3 target, the conserved TFIIA-like zinc finger transcription factor EGL-46, adopts the alternative role of specifying commissural dendrites. The known EGL-46 binding partner, the TEAD transcription factor EGL-44, is also required for PVD commissural branch outgrowth. Double mutants of hpo-30 and egl-44 show strong enhancement of the lateral branching defect with decreased numbers of both pioneer and commissural dendrites. Thus, HPO-30/Claudin and EGL-46/EGL-44 function downstream of MEC-3 and in parallel acting pathways to direct outgrowth of two distinct classes of PVD dendritic branches. Copyright © 2017 Elsevier Inc. All rights reserved.

Effect of La2O3 addition on interface chemistry between 4YSZ top layer and Ni based alloy bond coat in thermal barrier coating by EB PVD.

PubMed

Park, Chan-Young; Yang, Young-Hwan; Kim, Seong-Won; Lee, Sung-Min; Kim, Hyung-Tae; Jang, Byung-Koog; Lim, Dae-Soon; Oh, Yoon-Suk

2014-11-01

The effect of a 5 mol% La2O3 addition on the forming behavior and compositional variation at interface between a 4 mol% Yttria (Y2O3) stabilized ZrO2 (4YSZ) top coat and bond coat (NiCrAlY) as a thermal barrier coating (TBC) has been investigated. Top coats were deposited by electron beam physical vapor deposition (EB PVD) onto a super alloy (Ni-Cr-Co-Al) substrate without pre-oxidation of the bond coat. Top coats are found to consist of dense columnar grains with a thin interdiffusion layer between metallic bond coats. In the as-received 4YSZ coating, a thin interdiffusion zone at the interface between the top and bond coats was found to consist of a Ni-Zr intermetallic compound with a reduced quantity of Y, Al or O elements. On the other hand, in the case of an interdiffusion area of 5 mol% La2O3-added 4YSZ coating, it was found that the complicated composition and structure with La-added YSZ and Ni-Al rich compounds separately. The thermal conductivity of 5 mol% La2O3-added 4YSZ coating (- 1.6 W/m x k at 1100 degrees C) was lower than a 4YSZ coating (- 3.2 W/m x k at 1100 degrees C) alone.

Isolation, characterization and cloning of a cDNA encoding a new antifungal defensin from Phaseolus vulgaris L. seeds.

PubMed

Games, Patrícia D; Dos Santos, Izabela S; Mello, Erica O; Diz, Mariângela S S; Carvalho, André O; de Souza-Filho, Gonçalo A; Da Cunha, Maura; Vasconcelos, Ilka M; Ferreira, Beatriz Dos S; Gomes, Valdirene M

2008-12-01

The PvD1 defensin was purified from Phaseolus vulgaris (cv. Pérola) seeds, basically as described by Terras et al. [Terras FRG, Schoofs HME, De Bolle MFC, Van Leuven F, Ress SB, Vanderleyden J, Cammue BPA, Broekaer TWF. Analysis of two novel classes of plant antifungal proteins from radish (Raphanus sativus L.) seeds. J Biol Chem 1992;267(22):15301-9], with some modifications. A DEAE-Sepharose, equilibrated with 20mM Tris-HCl, pH 8.0, was initially utilized for the separation of peptides after ammonium sulfate fractionation. The basic fraction (the non-retained peak) obtained showed the presence of one unique band in SDS-Tricine gel electrophoresis with a molecular mass of approximately 6kDa. The purification of this peptide was confirmed after a reverse-phase chromatography in a C2/C18 column by HPLC, where once again only one peak was observed and denominated H1. H1 was submitted to N-terminal sequencing and the comparative analysis in databanks revealed high similarity with sequences of different defensins isolated from other plants species. The N-terminal sequence of the mature defensin isolated was used to produce a degenerated primer. This primer allowed the amplification of the defensin cDNA by RT-PCR from mRNA of P. vulgaris seeds. The sequence analysis of the cloned cDNA, named PVD1, demonstrated 314bp encoding a polypeptide of 47 amino acids. The deduced peptide presented high similarity with plant defensins of Vigna unguiculata (93%), Cicer arietinum (95%) and Pachyrhizus erosus (87%). PvD1 inhibited the growth of the yeasts, Candida albicans, Candida parapsilosis, Candida tropicalis, Candida guilliermondii, Kluyveromyces marxiannus and Saccharomyces cerevisiae. PvD1 also presented an inhibitory activity against the growth of phytopathogenic fungi including Fusarium oxysporum, Fusarium solani, Fusarium lateritium and Rizoctonia solani.

Assessment of risk of peripheral vascular disease and vascular care capacity in low- and middle-income countries.

PubMed

Gyedu, A; Stewart, B T; Nakua, E; Quansah, R; Donkor, P; Mock, C; Hardy, M; Yangni-Angate, K H

2016-01-01

This study aimed to describe national peripheral vascular disease (PVD) risk and health burden, and vascular care capacity in Ghana. The gap between PVD burden and vascular care capacity in low- and middle-income countries was defined, and capacity improvement priorities were identified. Data to estimate PVD risk factor burden were obtained from the World Health Organization Study on Global Ageing and Adult Health (SAGE), Ghana, and the Institute of Health Metrics and Evaluation Global Burden of Disease (IHME GBD) database. In addition, a novel nationwide assessment of vascular care capacity was performed, with 20 vascular care items assessed at 40 hospitals in Ghana. Factors contributing to specific item deficiency were described. From the SAGE database, there were 4305 respondents aged at least 50 years with data to estimate PVD risk. Of these, 57·4 per cent were at moderate to risk high of PVD with at least three risk factors; extrapolating nationally, the estimate was 1 654 557 people. Based on IHME GBD data, the estimated disability-adjusted life-years incurred from PVD increased fivefold from 1990 to 2010 (from 6·3 to 31·7 per 100 000 persons respectively). Vascular care capacity assessment demonstrated marked deficiencies in items for diagnosis, and in perioperative and vascular surgical care. Deficiencies were most often due to absence of equipment, lack of training and technology breakage. Risk factor reduction and management as well as optimization of current resources are paramount to avoid the large burden of PVD falling on healthcare systems in low- and middle-income countries. These countries are not well equipped to handle vascular surgical care, and rapid development of such capacity would be difficult and expensive. © 2015 BJS Society Ltd Published by John Wiley & Sons Ltd.

Properties of the carbon-palladium nanocomposites studied by Raman spectroscopy method

NASA Astrophysics Data System (ADS)

Belka, Radosław; Suchańska, Małgorzata

2013-10-01

In this paper, the results for thin carbon-palladium (C-Pd) nanocomposites obtained by PVD (Physical Vapour Deposition) and PVD/CVD (Chemical Vapour Deposition) method, carried out using Raman spectroscopy method are presented. Studies reveal the dominance of fullerene-like structure for PVD samples and graphite-like structures for CVD samples. The type of substrate and metal content have great impact on spectra shapes.

Type 2 pyoverdine from Pseudomonas aeruginosa strain BUP2 as turn-off biosensor for the rapid detection of iron and copper ions in contaminated water.

PubMed

Unni, Kizhakkepowathial Nair; Priji, Prakasan; Sajith, Sreedharan; Faisal, Panichikkal Abdul; Shainy, Karippayi Mattil; Joseph, Abraham; Babu, Moolath Girish; Benjamin, Sailas

2016-09-23

Employing fluorescent quenching mechanism, type 2 pyoverdine (PVD) purified from Pseudomonas aeruginosa strain BUP2 (new strain isolated from the rumen of Malabari goat) was used as a simple, convenient and inexpensive tool for the rapid detection of Fe and Cu ions in contaminated drinking water samples. The fluorescence emitted at λ 460 by PVD (in sterile water), mounted on a glass slide was efficiently quenched by the ions of heavy metals like Fe and Cu. The fluorescence quenching effect of PVD was monitored using UV trans-illuminator, and subsequently quantified and confirmed by spectrofluorimetry. Upon exposure for about 50 sec at 25 °C, this quenching efficiency could directly be assessed by naked eye with the aid of a UV trans-illuminator. The linear range of detection for Fe was 1 to 60 µM, while that of Cu was 1 to 20 µM. The limits of detection at µM concentration for Fe 3+ , Fe 2+ and Cu 2+ were 0.23, 0.24 and 0.38, respectively. The quenching of fluorescence was more pronounced in Fe-PVD system than Cu-PVD, and this observation was in corroboration with the Pearson acid base concept; being a hard acid, Fe 3+ effectively bound with the O-ligands and this ability was less in Cu 2+ , a border line acid. Briefly, this study proposed the use of type 2 PVD as a turn-off biosensor for the rapid screening of heavy metals like Fe and Cu in drinking water, at ppm levels only with the aid of UV trans-illuminator at 25 °C in 50 sec.

Identification of a new Apscaviroid from Japanese persimmon.

PubMed

Nakaune, Ryoji; Nakano, Masaaki

2008-01-01

Three viroid-like sequences were detected from Japanese persimmon (Diospyrus kaki Thunb.) by RT-PCR using primers specific for members of the genus Apscaviroid. Based on the sequences, we determined the complete genomic sequences. Two had 92.1-94.3% sequence identity with citrus viroid OS (CVd-OS) and 91.4-96.3% identity with apple fruit crinkle viroid (AFCVd), respectively. Another one, tentatively named persimmon viroid (PVd), had 396 nucleotides and less than 70% sequence identity with known viroids. The secondary structure of PVd is proposed to be rod-like with extensive base pairing and contains the terminal conserved region and the central conserved region characteristic of the genus Apscaviroid. Moreover, we confirmed that the viroids, including PVd, are graft transmissible from persimmon to persimmon and that persimmon is a natural host of these viroids. According to its molecular and biological properties, PVd should be considered a member of a new species in the genus Apscaviroid.

Role of the vitreous in age-related macular degeneration.

PubMed

Ondeş, F; Yilmaz, G; Acar, M A; Unlü, N; Kocaoğlan, H; Arsan, A K

2000-01-01

To investigate the relationship between posterior vitreous detachment (PVD) and age-related macular degeneration (AMD). The condition of the vitreous was examined by slit-lamp funduscopy and ultrasonography in 93 eyes of 50 patients with AMD (exudative or dry) and 100 eyes of 50 controls. There was complete PVD in 31 of the 93 eyes (33.3%) of 50 patients with AMD and the posterior vitreous was attached in 62 of these eyes (66.6%). In the control group, in 50 eyes (50%) of 50 subjects there was posterior vitreous detachment. The prevalence of PVD in eyes with macular degeneration was significantly lower (P < .05). There was no statistically significant difference between the exudative and the nonexudative groups in respect to PVD. PVD may have a protective role against the development of AMD. Chronic vitreomacular traction and/or continuous exposure to free radicals and cytokines may possibly be one of the causes of AMD in eyes with attached vitreous.

Acute-onset floaters and flashes: is this patient at risk for retinal detachment?

PubMed

Hollands, Hussein; Johnson, Davin; Brox, Anya C; Almeida, David; Simel, David L; Sharma, Sanjay

2009-11-25

Acute onset of monocular floaters and/or flashes represents a common presentation to primary care physicians, and the most likely diagnosis is posterior vitreous detachment (PVD). A significant proportion of patients with acute PVD develop an associated retinal tear that can lead to retinal detachment and permanent vision loss if left untreated. To quantify the association between relevant clinical variables and risk of retinal tear in patients presenting with acute-onset floaters and/or flashes and PVD. Structured MEDLINE (January 1950-September 2009) and EMBASE (January 1980-September 2009) searches and a hand search of references and citations of retrieved articles yielded 17 relevant studies. Studies of high-level methods that related elements of the history or physical examination in patients presenting with floaters and/or flashes and PVD to the likelihood of retinal tear. For patients with acute onset of floaters and/or flashes who are self-referred or referred to an ophthalmologist, the prevalence of retinal tear is 14% (95% confidence interval [CI], 12%-16%). Subjective visual reduction is the most important symptom associated with retinal tear (likelihood ratio [LR], 5.0; 95% CI, 3.1-8.1). Vitreous hemorrhage on slitlamp biomicroscopy is the best-studied finding with the narrowest positive LR for retinal tear (summary LR, 10; 95% CI, 5.1-20). Absence of vitreous pigment during this examination is the best-studied finding with the narrowest negative LR (summary LR, 0.23; 95% CI, 0.12-0.43). Patients initially diagnosed as having uncomplicated PVD have a 3.4% chance of a retinal tear within 6 weeks. The risk increases with new onset of at least 10 floaters (summary LR, 8.1-36) or subjective visual reduction (summary LR, 2.3-17) during this period. Primary care physicians should evaluate patients with acute-onset floaters and/or flashes due to suspected PVD, or patients with known PVD and a change in symptoms, for high-risk features of retinal tear and

New pulmonary vein Doppler echocardiographic index predicts significant interatrial shunting in secundum atrial septal defect.

PubMed

Lam, Yat-Yin; Fang, Fang; Yip, Gabriel Wai-Kwok; Li, Zhi-An; Yang, Ya; Yu, Cheuk-Man

2012-09-20

The relation between pulmonary venous flow (PVF) pattern and degree of left-to-right interatrial shunting (IAS) in patients with secundum atrial septal defect (ASD) is unknown. Fifty consecutive ASD patients (14 males, 36 ± 17 years) received transthoracic echocardiography (TTE) before and 1 day after transcatheter closure and their results were compared to 40 controls. The ratio of pulmonary-to-systemic flows (Qp/Qs) was assessed by TTE and invasive oximetry. Pre-closure PV systolic (PVs), diastolic (PVd) velocities and velocity-time integral (PV-VTI) increased, time from onset of ECG Q-wave to the peak PV diastolic wave (Q-PVd) shortened and atrial reversal (PVar) velocity significantly decreased as compared to normals. These findings normalized after closure. Patients with large IAS (defined as invasive Qp/Qs ≥ 2) had higher PVs, PVd and PV-VTI, shorter Q-PVd but lower PVar (all p<0.01) than those with small IAS. Invasive Qp/Qs ratios correlated with PVs, PVd, PV-VTI, Q-PVd and TTE-derived Qp/Qs ratios, ASD sizes and RV end-diastolic dimensions (all p<0.05). PV-VTI (β=0.49) and ASD size (β=0.48) remained independent predictors of large IAS after multivariate analysis. The corresponding sensitivity, specificity and AUC were 89%, 82% and 0.90 respectively for a PV-VTI of 30 cm (p<0.001). ASD patients with significant IAS have distinguishable PVF features. Doppler evaluation of PV-VTI is a novel additional tool for assessing the magnitude of shunting in these patients non-invasively. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Why Us? Perceived Injustice is Associated With More Sexual and Psychological Distress in Couples Coping With Genito-Pelvic Pain.

PubMed

Pâquet, Myriam; Bois, Katy; Rosen, Natalie O; Mayrand, Marie-Hélène; Charbonneau-Lefebvre, Véronique; Bergeron, Sophie

2016-01-01

Provoked vestibulodynia (PVD) is the most frequent cause of genito-pelvic pain/penetration disorder (GPPPD) and is associated with negative psychological and sexual consequences for affected women and their partners. PVD is often misdiagnosed or ignored and many couples may experience a sense of injustice, due to the loss of their ability to have a normal sexual life. Perceiving injustice has been documented to have important consequences in individuals with chronic pain. However, no quantitative research has investigated the experience of injustice in this population. The aim of this study was to investigate the associations between perceived injustice and pain, sexual satisfaction, sexual distress, and depression among women with PVD and their partners. Women diagnosed with PVD (N = 50) and their partners completed questionnaires of perceived injustice, pain, sexual satisfaction, sexual distress, and depression. (1) Global Measure of Sexual Satisfaction Scale; (2) Female Sexual Distress Scale; (3) Beck Depression Inventory-II; and (4) McGill-Melzack Pain Questionnaire. After controlling for partners' age, women's higher level of perceived injustice was associated with their own greater sexual distress, and the same pattern was found for partners. Women's higher level of perceived injustice was associated with their own greater depression, and the same pattern was found for partners. Women's higher perceived injustice was not associated with their own lower sexual satisfaction but partners' higher perceived injustice was associated with their own lower sexual satisfaction. Perceived injustice was not associated with women's pain intensity. Results suggest that perceiving injustice may have negative consequences for the couple's sexual and psychological outcomes. However, the effects of perceived injustice appear to be intra-individual. Targeting perceived injustice could enhance the efficacy of psychological interventions for women with PVD and their partners

Elastase and matrix metalloproteinase activities are associated with pulmonary vascular disease in the nitrofen rat model of congenital diaphragmatic hernia.

PubMed

Wild, Benjamin; St-Pierre, Marie-Eve; Langlois, Stéphanie; Cowan, Kyle N

2017-05-01

Pulmonary vascular disease (PVD) is a leading cause of congenital diaphragmatic hernia (CDH) mortality. Progression of PVD involves extracellular matrix remodeling by elastases and matrix metalloproteinases (MMP), concomitant with proliferation of smooth muscle cells in a growth factor-enriched environment. Blockade of this pathway reversed primary pulmonary hypertension and improved survival. This study was designed to determine whether a similar pathway is induced in PVD secondary to CDH. Fetal rats exposed to nitrofen at gestational day 9 developed left-sided CDH and were compared at term to their non-CDH littermates by assessing histologic and biochemical features of PVD. Rats with CDH displayed right ventricle hypertrophy, increased pulmonary artery medial wall thickness and muscularization, and decreased lumen size. As revealed by in situ zymography and immunohistochemistry, this was associated with an induction of elastolytic and MMP activities as well as an elevation of epidermal growth factor and osteopontin levels in the diseased lung vasculature. CDH-associated PVD involves an induction of elastase and MMP activities and increased osteopontin deposition in an epidermal growth factor-rich environment. Inhibition of this pathway may thus represent a novel therapeutic approach for the treatment of CDH-associated PVD. Level I (Basic Science Study). Copyright © 2017 Elsevier Inc. All rights reserved.

Experimental study of three-dimensional fin-channel charge trapping flash memories with titanium nitride and polycrystalline silicon gates

NASA Astrophysics Data System (ADS)

Liu, Yongxun; Matsukawa, Takashi; Endo, Kazuhiko; O'uchi, Shinichi; Tsukada, Junichi; Yamauchi, Hiromi; Ishikawa, Yuki; Mizubayashi, Wataru; Morita, Yukinori; Migita, Shinji; Ota, Hiroyuki; Masahara, Meishoku

2014-01-01

Three-dimensional (3D) fin-channel charge trapping (CT) flash memories with different gate materials of physical-vapor-deposited (PVD) titanium nitride (TiN) and n+-polycrystalline silicon (poly-Si) have successfully been fabricated by using (100)-oriented silicon-on-insulator (SOI) wafers and orientation-dependent wet etching. Electrical characteristics of the fabricated flash memories including statistical threshold voltage (Vt) variability, endurance, and data retention have been comparatively investigated. It was experimentally found that a larger memory window and a deeper erase are obtained in PVD-TiN-gated metal-oxide-nitride-oxide-silicon (MONOS)-type flash memories than in poly-Si-gated poly-Si-oxide-nitride-oxide-silicon (SONOS)-type memories. The larger memory window and deeper erase of MONOS-type flash memories are contributed by the higher work function of the PVD-TiN metal gate than of the n+-poly-Si gate, which is effective for suppressing electron back tunneling during erase operation. It was also found that the initial Vt roll-off due to the short-channel effect (SCE) is directly related to the memory window roll-off when the gate length (Lg) is scaled down to 46 nm or less.

Addressing the challenges of phenotyping pediatric pulmonary vascular disease

PubMed Central

Goss, Kara N.; Everett, Allen D.; Mourani, Peter M.; Baker, Christopher D.; Abman, Steven H.

2017-01-01

Pediatric pulmonary vascular disease (PVD) and pulmonary hypertension (PH) represent phenotypically and pathophysiologically diverse disease categories, contributing substantial morbidity and mortality to a complex array of pediatric conditions. Here, we review the multifactorial nature of pediatric PVD, with an emphasis on improved recognition, phenotyping, and endotyping strategies for pediatric PH. Novel tailored approaches to diagnosis and treatment in pediatric PVD, as well as the implications for long-term outcomes, are highlighted. PMID:28680562

Fluorine incorporation into SnO2 nanoparticles by co-milling with polyvinylidene fluoride

NASA Astrophysics Data System (ADS)

Senna, Mamoru; Turianicová, Erika; Šepelák, Vladimír; Bruns, Michael; Scholz, Gudrun; Lebedkin, Sergei; Kübel, Christian; Wang, Di; Kaňuchová, Mária; Kaus, Maximilian; Hahn, Horst

2014-04-01

Fluorine was incorporated into SnO2 nanoparticles from polyvinylidene fluoride (PVdF) by co-milling. The incorporation process was triggered by an oxidative partial decomposition of PVdF due to the abstraction of oxygen atoms, and began soon after milling with a simultaneous decrease in the crystallite size of SnO2 from 56 nm to 19 nm, and increase in the lattice strain by a factor 7. Appearance of D and G Raman peaks indicated that the decomposition of PVdF was accompanied by the formation of nanometric carbon species. Decomposing processes of PVdF were accompanied by the continuous change in the states of F, with a decrease of C-F in PVdF and increase in Sn-F. This indicates the gradual incorporation of F into SnO2, by replacing a part of oxygen in the oxide with fluorine. These serial mechanochemical reaction processes were discussed on the basis of X-ray diffractometry, FT-IR, Raman and UV-Vis diffuse reflectance spectroscopy, transmission electron microscopy, F1s, Sn3d and C1s X-ray photoelectron spectroscopy and Auger electron spectra, as well as magic angle spinning NMR spectroscopy of 19F and 119Sn. The present findings serve as an initial stage of incorporating fluorine into SnO2 via a solvent-free solid-state process, toward the rational fabrication of fluorine doped SnO2 powders.

Effect of Triflusal on Primary Vascular Dysregulation Compared with Aspirin: A Double-Blind, Randomized, Crossover Trial.

PubMed

Shin, Sanghoon; Kim, Kwang-Joon; Cho, In-Jeong; Hong, Geu-Ru; Jang, Yangsoo; Chung, Namsik; Rah, Young Min; Chang, Hyuk-Jae

2015-09-01

Primary vascular dysregulation (PVD) is a condition in which the response to cold temperature or external stimuli is abnormal. We investigated whether triflusal use results in amelioration of PVD symptoms and improvement of several related parameters compared with aspirin. Eighty-eight PVD patients (54% female, 56±8 years) were randomly selected to receive either triflusal (300 mg, b.i.d.) or aspirin (150 mg, b.i.d.) for a period of 6 weeks followed by crossover. PVD was defined as both red-blood-cell standstill in video-assisted microscopic capillaroscopy during cold stimulation using carbon dioxide gas and a score of more than 7 points in a validated questionnaire. Efficacy of treatment was assessed by 1) cold intolerance symptom severity (CISS) score, 2) finger Doppler indices, and 3) indocyanine green perfusion imaging. The use of triflusal resulted in a greater improvement in CISS score (44.5±18.4 vs. 51.9±16.2; p<0.001) and in mean radial peak systolic velocity (69.8±17.2 vs. 66.1±16.4; p=0.011) compared to aspirin. Furthermore, significant differences were also observed in perfusion rates on indocyanine green perfusion imaging between triflusal and aspirin (45.6±25.8 vs. 51.6±26.9; p=0.020). Triflusal was more effective and demonstrated a more consistent impact on the improvement of symptoms and blood flow in patients with PVD than aspirin.

Retrieval analysis of titanium nitride (TiN) coated prosthetic femoral heads articulating with polyethylene.

PubMed

Łapaj, Łukasz; Wendland, Justyna; Markuszewski, Jacek; Mróz, Adrian; Wiśniewski, Tomasz

2015-03-01

Data regarding in vivo performance of titanium nitride (TiN) coated prosthetic femoral heads is scarce, and available studies of older generations of implants demonstrated coating wear in vivo. That is why we conducted a retrieval analysis of 11 femoral heads (articulating in vivo for 1-56 months) with TiN film formed using physical vapor deposition (PVD), to verify if coating failure is a problem in contemporary implants. Retrieved implants were examined using scanning electron microscope, coating roughness was evaluated with a contact profilometer and adhesion was tested using a Rockwell HRC test according to VDI 3824 guideline. Although no gross failure of the TiN coating was observed in our retrievals, all implants had defects typical for PVD coatings, such as pinholes, small titanium droplets and blisters with delaminated coating. In some heads the coating was contaminated with small niobium (Nb) droplets uniformly scattered on the entire surface of the film. Presence of Nb contamination was associated with an increased number and area of other types of defects and poorer coating adhesion. In one component, subjected to multiple dislocations we found severe delamination and cracking of the coating, increased roughness and the presence of third bodies. Our results indicate, that although wear of the coating is lower than seen in older generations of implants, inconsistent quality of the TiN film among different implants indicates the need for strict monitoring of the manufacturing process. Copyright © 2015 Elsevier Ltd. All rights reserved.

Development of a dry, stable and inhalable acyl-homoserine-lactone-acylase powder formulation for the treatment of pulmonary Pseudomonas aeruginosa infections.

PubMed

Wahjudi, Mariana; Murugappan, Senthil; van Merkerk, Ronald; Eissens, Anko C; Visser, Marinella R; Hinrichs, Wouter L J; Quax, Wim J

2013-03-12

In the lungs of cystic fibrosis (CF) patients, Pseudomonas aeruginosa commonly causes chronic infections. It has been shown that the P. aeruginosa quorum sensing (QS) system controls the expression of virulence factors during invasion and infection to host cells. PvdQ is an acyl-homoserine lactone (AHL) acylase able to degrade the signal molecule of P. aeruginosa QS. The role of PvdQ in inhibiting the QS and its successive virulence determinants has been established in in vitro as well as in in vivo, the latter in a Caenorabdhitis elegans model. For the treatment of pulmonary P. aeruginosa infections, we propose that PvdQ can be best administered directly to the lungs of the patients as a dry powder because this is expected to give specific advantages in delivery as compared to nebulizing. Therefore in this study we investigated the production of a PvdQ powder by spray-freeze drying using mannitol, trehalose and inulin as excipient. The activity of PvdQ in the powder was determined immediately after production and after subsequent storage during 4 weeks at 20°C and 55°C. We found that the enzymatic activity of PvdQ is fully maintained during spray-freeze drying using mannitol, trehalose or inulin as excipient. However, mannitol was not able to stabilize the protein during storage, while PvdQ incorporated in trehalose or inulin was fully stabilized even during storage at 55°C for at least 4 weeks. The poor stabilizing capacities of mannitol during storage could be related to its crystalline nature while the excellent stabilizing capacities of trehalose and inulin during storage could be related to their amorphous nature. The trehalose and inulin-based particles consisted of porous spheres with a volume average aerodynamical diameter of ∼1.8 μm implying that they are suitable for pulmonary delivery. This is the first study in which an AHL-degrading enzyme is processed into spray-freeze-dried powder suitable for inhalation. Copyright © 2013 Elsevier B.V. All

The primary vascular dysregulation syndrome: implications for eye diseases

PubMed Central

2013-01-01

Vascular dysregulation refers to the regulation of blood flow that is not adapted to the needs of the respective tissue. We distinguish primary vascular dysregulation (PVD, formerly called vasospastic syndrome) and secondary vascular dysregulation (SVD). Subjects with PVD tend to have cold extremities, low blood pressure, reduced feeling of thirst, altered drug sensitivity, increased pain sensitivity, prolonged sleep onset time, altered gene expression in the lymphocytes, signs of oxidative stress, slightly increased endothelin-1 plasma level, low body mass index and often diffuse and fluctuating visual field defects. Coldness, emotional or mechanical stress and starving can provoke symptoms. Virtually all organs, particularly the eye, can be involved. In subjects with PVD, retinal vessels are stiffer and more irregular, and both neurovascular coupling and autoregulation capacity are reduced while retinal venous pressure is often increased. Subjects with PVD have increased risk for normal-tension glaucoma, optic nerve compartment syndrome, central serous choroidopathy, Susac syndrome, retinal artery and vein occlusions and anterior ischaemic neuropathy without atherosclerosis. Further characteristics are their weaker blood–brain and blood-retinal barriers and the higher prevalence of optic disc haemorrhages and activated astrocytes. Subjects with PVD tend to suffer more often from tinnitus, muscle cramps, migraine with aura and silent myocardial ischaemic and are at greater risk for altitude sickness. While the main cause of vascular dysregulation is vascular endotheliopathy, dysfunction of the autonomic nervous system is also involved. In contrast, SVD occurs in the context of other diseases such as multiple sclerosis, retrobulbar neuritis, rheumatoid arthritis, fibromyalgia and giant cell arteritis. Taking into consideration the high prevalence of PVD in the population and potentially linked pathologies, in the current article, the authors provide

Improving Outcomes for Pulmonary Vascular Disease

PubMed Central

Robbins, Ivan M.; Blaisdell, Carol J.; Abman, Steven H.

2012-01-01

Recognizing the importance of improving lung health through lung disease research, the National Heart, Lung, and Blood Institute (NHLBI) convened a workshop of multidisciplinary experts for the following purpose: (1) to review the current scientific knowledge underlying the basis for treatment of adults and children with pulmonary vascular diseases (PVDs); (2) to identify gaps, barriers, and emerging scientific opportunities in translational PVD research and the means to capitalize on these opportunities; (3) to prioritize new research directions that would be expected to affect the clinical course of PVDs; and (4) to make recommendations to the NHLBI on how to fill identified gaps in adult and pediatric PVD clinical research. Workshop participants reviewed experiences from previous PVD clinical trials and ongoing clinical research networks with other lung disorders, including acute respiratory distress syndrome, chronic obstructive lung disease, and idiopathic pulmonary fibrosis, as well. Bioinformatics experts discussed strategies for applying cutting-edge health information technology to clinical studies. Participants in the workshop considered approaches in the following broad concept areas: (1) improved phenotyping to identify potential subjects for appropriate PVD clinical studies; (2) identification of potential new end points for assessing key outcomes and developing better-designed PVD clinical trials; and (3) the establishment of priorities for specific clinical research needed to advance care of patients with various subsets of PVDs from childhood through adulthood. This report provides a summary of the objectives and recommendations to the NHLBI concentrating on clinical research efforts that are needed to better diagnose and treat PVDs. PMID:22335936

Psychosocial risk factors which may differentiate between women with Functional Voice Disorder, Organic Voice Disorder and a Control group.

PubMed

Baker, Janet; Ben-Tovim, David; Butcher, Andrew; Esterman, Adrian; McLaughlin, Kristin

2013-12-01

This study aimed to explore psychosocial factors contributing to the development of functional voice disorders (FVD) and those differentiating between organic voice disorders (OVD) and a non-voice-disordered control group. A case-control study was undertaken of 194 women aged 18-80 years diagnosed with FVD (n = 73), OVD (n = 55), and controls (n = 66). FVD women were allocated into psychogenic voice disorder (PVD) (n = 37) and muscle tension voice disorder (MTVD) (n = 36) for sub-group analysis. Dependent variables included biographical and voice assessment data, the number and severity of life events and difficulties and conflict over speaking out (COSO) situations derived from the Life Events and Difficulties Schedule (LEDS), and psychological traits including emotional expressiveness scales. Four psychosocial components differentiated between the FVD and control group accounting for 84.9% of the variance: severe events, moderate events, severe COSO, and mild COSO difficulties. Severe events, severe and mild COSO difficulties differentiated between FVD and OVD groups, accounting for 80.5% of the variance. Moderate events differentiated between PVD and MTVD sub-groups, accounting for 58.9% of the variance. Psychological traits did not differentiate between groups. Stressful life events and COSO situations best differentiated FVD from OVD and control groups. More refined aetiological studies are needed to differentiate between PVD and MTVD.

Effect of Suspension Plasma-Sprayed YSZ Columnar Microstructure and Bond Coat Surface Preparation on Thermal Barrier Coating Properties

NASA Astrophysics Data System (ADS)

Bernard, Benjamin; Quet, Aurélie; Bianchi, Luc; Schick, Vincent; Joulia, Aurélien; Malié, André; Rémy, Benjamin

2017-08-01

Suspension plasma spraying (SPS) is identified as promising for the enhancement of thermal barrier coating (TBC) systems used in gas turbines. Particularly, the emerging columnar microstructure enabled by the SPS process is likely to bring about an interesting TBC lifetime. At the same time, the SPS process opens the way to a decrease in thermal conductivity, one of the main issues for the next generation of gas turbines, compared to the state-of-the-art deposition technique, so-called electron beam physical vapor deposition (EB-PVD). In this paper, yttria-stabilized zirconia (YSZ) coatings presenting columnar structures, performed using both SPS and EB-PVD processes, were studied. Depending on the columnar microstructure readily adaptable in the SPS process, low thermal conductivities can be obtained. At 1100 °C, a decrease from 1.3 W m-1 K-1 for EB-PVD YSZ coatings to about 0.7 W m-1 K-1 for SPS coatings was shown. The higher content of porosity in the case of SPS coatings increases the thermal resistance through the thickness and decreases thermal conductivity. The lifetime of SPS YSZ coatings was studied by isothermal cyclic tests, showing equivalent or even higher performances compared to EB-PVD ones. Tests were performed using classical bond coats used for EB-PVD TBC coatings. Thermal cyclic fatigue performance of the best SPS coating reached 1000 cycles to failure on AM1 substrates with a β-(Ni,Pt)Al bond coat. Tests were also performed on AM1 substrates with a Pt-diffused γ-Ni/γ'-Ni3Al bond coat for which more than 2000 cycles to failure were observed for columnar SPS YSZ coatings. The high thermal compliance offered by both the columnar structure and the porosity allowed the reaching of a high lifetime, promising for a TBC application.

Vapor Phase Deposition Using Plasma Spray-PVD™

NASA Astrophysics Data System (ADS)

von Niessen, K.; Gindrat, M.; Refke, A.

2010-01-01

Plasma spray—physical vapor deposition (PS-PVD) is a low pressure plasma spray technology to deposit coatings out of the vapor phase. PS-PVD is a part of the family of new hybrid processes recently developed by Sulzer Metco AG (Switzerland) on the basis of the well-established low pressure plasma spraying (LPPS) technology. Included in this new process family are plasma spray—chemical vapor deposition (PS-CVD) and plasma spray—thin film (PS-TF) processes. In comparison to conventional vacuum plasma spraying and LPPS, these new processes use a high energy plasma gun operated at a work pressure below 2 mbar. This leads to unconventional plasma jet characteristics which can be used to obtain specific and unique coatings. An important new feature of PS-PVD is the possibility to deposit a coating not only by melting the feed stock material which builds up a layer from liquid splats, but also by vaporizing the injected material. Therefore, the PS-PVD process fills the gap between the conventional PVD technologies and standard thermal spray processes. The possibility to vaporize feedstock material and to produce layers out of the vapor phase results in new and unique coating microstructures. The properties of such coatings are superior to those of thermal spray and EB-PVD coatings. This paper reports on the progress made at Sulzer Metco to develop functional coatings build up from vapor phase of oxide ceramics and metals.

Microplasmin-Induced Posterior Vitreous Detachment Affects Vitreous Oxygen Levels

PubMed Central

Quiram, Polly A.; Leverenz, Victor R.; Baker, Robert M.; Dang, Loan; Giblin, Frauk J.; Trese, Michael T.

2009-01-01

Purpose To determine if enzymatic induction of a posterior vitreous detachment (PVD) and/or vitreous liquefaction affects O2 concentration in the vitreous cavity in animals with vascularized and avascular retinal circulations. Methods Either microplasmin or hyaluronidase was injected intravitreally into guinea pigs (avascular retinal circulation), brown Norway rats (vascularized retinal circulation without fovea), or cats (vascularized retinal circulation with fovea) with the contralateral eye used as a control. One to 2 weeks post injection, vitreal oxygen concentration was measured using a highly sensitive, platinum-based fluorophore O2 sensor. In addition, control and microplasmin-injected rats, guinea pigs, and cats were exposed to 100% oxygen and vitreal O2 levels were measured over time. Scanning electron microscopy (SEM) was used to evaluate the vitreoretinal interface for the presence of a PVD. Results In animals with a vascularized retinal circulation (brown Norway rats and cats), intravitreal injection of microplasmin with induction of a PVD significantly increased baseline O2 concentration in the vitreous cavity compared to hyaluronidase injected eyes and controls in rats (35, 25, and 23 mm Hg, P < 0.001 and P < 0.001, respectively) and cats (26, 18, and 16 mm Hg, P < 0.01 and P < 0.001, respectively). Interestingly, intravitreal injection of hyaluronidase (vitreous liquefaction without induction of a PVD) did not significantly increase vitreal O2 levels in any of the animal species (P > 0.1). Upon exposure to 100% oxygen by facemask, microplasmin injected animals showed a rapid increase in vitreal oxygen levels compared to hyaluronidase injected animals and controls, indicating that the presence of a PVD allows rapid O2 exchange within the vitreous cavity. Similarly, once O2 was discontinued, the O2 concentration decreased in a similarly rapid rate. SEM showed smooth retinal surfaces in microplasmin-injected cat eyes, indicating the presence of a PVD

Sensory Neuron Fates Are Distinguished by a Transcriptional Switch that Regulates Dendrite Branch Stabilization

PubMed Central

Smith, Cody J.; O’Brien, Timothy; Chatzigeorgiou, Marios; Spencer, W. Clay; Feingold-Link, Elana; Husson, Steven J.; Hori, Sayaka; Mitani, Shohei; Gottschalk, Alexander; Schafer, William R.; Miller, David M.

2013-01-01

SUMMARY Sensory neurons adopt distinct morphologies and functional modalities to mediate responses to specific stimuli. Transcription factors and their downstream effectors orchestrate this outcome but are incompletely defined. Here, we show that different classes of mechanosensory neurons in C. elegans are distinguished by the combined action of the transcription factors MEC-3, AHR-1, and ZAG-1. Low levels of MEC-3 specify the elaborate branching pattern of PVD nociceptors, whereas high MEC-3 is correlated with the simple morphology of AVM and PVM touch neurons. AHR-1 specifies AVM touch neuron fate by elevating MEC-3 while simultaneously blocking expression of nociceptive genes such as the MEC-3 target, the claudin-like membrane protein HPO-30, that promotes the complex dendritic branching pattern of PVD. ZAG-1 exercises a parallel role to prevent PVM from adopting the PVD fate. The conserved dendritic branching function of the Drosophila AHR-1 homolog, Spineless, argues for similar pathways in mammals. PMID:23889932

Neurodevelopmental outcome of twins at two years of age according to the planned mode of delivery.

PubMed

Dekeunink, Ghislaine M M; Goossens, Simone M T A; Matthijs, van der Garde; Senden, Rachel H J; Beckers, Cynthia M J; Roumen, Frans J M E

2016-01-01

To determine neurodevelopment at two years in twins. At two years of age, all twins ≥32 weeks, delivered in our center and not randomized in the Twin Birth Study, underwent a neurodevelopment screen using the Ages and Stages Questionnaire (ASQ). Children with ≥1 abnormal ASQ domain score were evaluated by a pediatrician. Results were documented according to a planned cesarean section (PCS) or a planned vaginal delivery (PVD). An ASQ was obtained from 185 children (67%). No significant differences in percentages of abnormal scores were found between the PCS group and the PVD group or between twins A and B. Pediatric assessment revealed three children with a neurodevelopmental delay. Five other children were already under pediatric or general practitioner care for other reasons. One child with a congenital anomaly was born by a PCS, two twins A and five twins B were born in the PVD group. ASQ screening revealed no significant differences in abnormal neurodevelopment in twins at two years of age according to the mode of delivery. Pediatric assessment suggested an increased incidence for abnormal neurodevelopment in twins B born by PVD.

Characterization of Circulating and Endothelial Progenitor Cells in Patients With Extreme-Duration Type 1 Diabetes

PubMed Central

Hernandez, Sonia L.; Gong, Jennifer H.; Chen, Liming; Wu, I-Hsien; Sun, Jennifer K.; Keenan, Hillary A.; King, George L.

2014-01-01

OBJECTIVE We characterized and correlated endothelial progenitor cells (EPCs) and circulating progenitor cells (CPCs) with lack of vascular complications in the Joslin Medalist Study in patients with type 1 diabetes for 50 years or longer. RESEARCH DESIGN AND METHODS EPC and CPC levels were ascertained by flow cytometry and compared among Medalists (n = 172) with or without diabetic retinopathy (DR; n = 84 of 162), neuropathy (n = 94 of 165), diabetic nephropathy (DN; n = 18 of 172), cardiovascular disease (CVD; n = 63 of 168), age-matched controls (n = 83), type 2 diabetic patients (n = 36), and younger type 1 diabetic patients (n = 31). Mitogens, inflammatory cytokines, and oxidative markers were measured in blood or urine. Migration of cultured peripheral blood mononuclear cells (PBMCs) from Medalists and age-matched controls were compared. RESULTS Medalists’ EPC and CPC levels equaled those of their nondiabetic age-matched controls, were 10% higher than those in younger type 1 diabetic patients, and were 20% higher than those in age-matched type 2 diabetic patients. CPC levels were 15% higher in Medalists without CVD and nephropathy than in those affected, whereas EPC levels were significantly higher in those without peripheral vascular disease (PVD) than those with PVD. Stromal-derived factor 1 (SDF-1) levels were higher in Medalists with CVD, DN, and DR than in those not affected and their controls. IGF-I levels were lower in Medalists and correlated inversely with CPC levels. Additionally, cultured PBMCs from Medalists migrated more than those from nondiabetic controls. CONCLUSIONS Normal levels of EPC and CPC in the Medalists, unlike other groups with diabetes, especially those without CVD, support the idea that endogenous factors exist to neutralize the adverse effects of metabolic abnormalities of diabetes on vascular tissues. PMID:24780357

Posterior vitreous detachment induced by nattokinase (subtilisin NAT): a novel enzyme for pharmacologic vitreolysis.

PubMed

Takano, Akiomi; Hirata, Akira; Ogasawara, Kazuya; Sagara, Nina; Inomata, Yasuya; Kawaji, Takahiro; Tanihara, Hidenobu

2006-05-01

To investigate the effects of intravitreal injection of nattokinase (subtilisin NAT), a serine protease that is produced by Bacillus subtilis (natto), for induction of posterior vitreous detachment (PVD). Different doses of nattokinase (1, 0.1, or 0.01 fibrin-degradation units [FU]) or physiologic saline as a control were injected into the vitreous cavity of rabbit eyes. Scanning electron microscopy was used to observe the retinal surfaces of four rabbit eyes per concentration. Histologic alterations were assessed by light microscopy, using four eyes from each group. Electroretinography (ERG) was performed to observe retinal function, ranging from 1 hour to 1 week after the nattokinase (1 or 0.1 FU) or saline solution administration, using four eyes from each group at each time point. Also, findings in all rabbits were monitored by slit lamp examination and by indirect ophthalmoscopy with a 20-D lens. Scanning electron microscopy showed smooth retinal surfaces, indicating the occurrence of PVD at 30 minutes after intervention in all the experimental eyes injected with 0.1 or 1.0 FU nattokinase, but none of the control eyes. Light microscopy and ERG analysis showed no critical change even after the use of 0.1 FU nattokinase, an amount sufficient to induce PVD. However, toxicity in the forms of preretinal hemorrhage and ERG changes was noted with the higher dose (1 FU) of nattokinase. The results suggested that nattokinase is a useful enzyme for pharmacologic vitreolysis because of its efficacy in inducing PVD.

Morphological characteristics associated with rupture risk of multiple intracranial aneurysms.

PubMed

Wang, Guang-Xian; Liu, Lan-Lan; Wen, Li; Cao, Yun-Xing; Pei, Yu-Chun; Zhang, Dong

2017-10-01

To identify the morphological parameters that are related to intracranial aneurysms (IAs) rupture using a case-control model. A total of 107 patients with multiple IAs and aneurysmal subarachnoid hemorrhage between August 2011 and February 2017 were enrolled in this study. Characteristics of IAs location, shape, neck width, perpendicular height, depth, maximum size, flow angle, parent vessel diameter (PVD), aspect ratio (AR) and size ratio (SR) were evaluated using CT angiography. Multiple logistic regression analysis was used to identify the independent risk factors associated with IAs rupture. Receiver operating characteristic curve analysis was performed on the final model, and the optimal thresholds were obtained. IAs located in the internal carotid artery (ICA) was associated with a negative risk of rupture, whereas AR, SR1 (height/PVD) and SR2 (depth/PVD) were associated with increased risk of rupture. When SR was calculated differently, the odds ratio values of these factors were also different. The receiver operating characteristic curve showed that AR, SR1 and SR2 had cut-off values of 1.01, 1.48 and 1.40, respectively. SR3 (maximum size/PVD) was not associated with IAs rupture. IAs located in the ICA are associated with a negative risk of rupture, while high AR (>1.01), SR1 (>1.48) or SR2 (>1.40) are risk factors for multiple IAs rupture. Copyright © 2017 Hainan Medical University. Production and hosting by Elsevier B.V. All rights reserved.

Mismatch negativity as a potential neurobiological marker of early-stage Alzheimer disease and vascular dementia.

PubMed

Jiang, Shixiang; Yan, Chang; Qiao, Zhengxue; Yao, Haiqian; Jiang, Shiquan; Qiu, Xiaohui; Yang, Xiuxian; Fang, Deyu; Yang, Yanjie; Zhang, Limei; Wang, Lina; Zhang, Liming

2017-04-24

Alzheimer's disease (AD) and vascular dementia (VD) are serious, irreversible forms of cognitive impairment, which means that an early diagnosis is essential to slow down their progression. One potential neurophysiological biomarker of these diseases is the mismatch negativity (MMN) event-related potentials (ERP) component, which reflects an automatic detection mechanism at the pre-attentive stages of information processing. We evaluated the auditory MMN response in individuals from two patient groups: those in the prodromal stages of AD (P-AD) and those in the prodromal stages of VD (P-VD). Thirty patients (15 P-AD patients and 15 P-VD patients) and 30 age-matched controls were recruited to undergo electrophysiological recordings during the presentation of an auditory deviant-standard-reverse oddball paradigm that was used to elicit genuine MMN responses. We show that over the frontal-central area, the mean amplitude of the MMN was significantly reduced in both the P-AD (p=0.017) and P-VD groups (p=0.013) compared with controls. The MMN peak latency in P-VD patients was significantly shorter than in controls (p=0.027). No MMN response differences between the P-AD and P-VD were found in either the frontal-central or the temporal areas. These results indicate that P-AD and P-VD patients exhibit impaired pre-attentive information processing mechanisms as revealed by the frontal-central area MMN response, which is associated with sensory memory and cognitive deficits. Copyright © 2017 Elsevier B.V. All rights reserved.

Biosynthesis of Novel Pyoverdines by Domain Substitution in a Nonribosomal Peptide Synthetase of Pseudomonas aeruginosa

PubMed Central

Calcott, Mark J.; Owen, Jeremy G.; Lamont, Iain L.

2014-01-01

Pyoverdine is a fluorescent nonribosomal peptide siderophore made by fluorescent pseudomonads. The Pseudomonas aeruginosa nonribosomal peptide synthetase (NRPS) PvdD contains two modules that each incorporate an l-threonine residue at the C-terminal end of pyoverdine. In an attempt to generate modified pyoverdine peptides, we substituted alternative-substrate-specifying adenylation (A) and peptide bond-catalyzing condensation (C) domains into the second module of PvdD. When just the A domain was substituted, the resulting strains produced only wild-type pyoverdine—at high levels if the introduced A domain specified threonine or at trace levels otherwise. The high levels of pyoverdine synthesis observed whenever the introduced A domain specified threonine indicated that these nonnative A domains were able to communicate effectively with the PvdD C domain. Moreover, the unexpected observation that non-threonine-specifying A domains nevertheless incorporated threonine into pyoverdine suggests that the native PvdD C domain exhibited stronger selectivity than these A domains for the incorporated amino acid substrate (i.e., misactivation of a threonine residue by the introduced A domains was more frequent than misincorporation of a nonthreonine residue by the PvdD C domain). In contrast, substitution of both the C and A domains of PvdD generated high yields of rationally modified pyoverdines in two instances, these pyoverdines having either a lysine or a serine residue in place of the terminal threonine. However, C-A domain substitution more commonly yielded a truncated peptide product, likely due to stalling of synthesis on a nonfunctional recombinant NRPS template. PMID:25015884

Quantitative near-infrared spectroscopy on patients with peripheral vascular disease

NASA Astrophysics Data System (ADS)

Franceschini, Maria-Angela; Fantini, Sergio; Palumbo, Renato; Pasqualini, Leonella; Vaudo, Gaetano; Franceschini, Edoardo; Gratton, Enrico; Palumbo, Barbara; Innocente, Salvatore; Mannarino, Elmo

1998-01-01

We have used near-infrared spectroscopy to measure the hemoglobin saturation at rest and during exercise on patients affected by peripheral vascular disease (PVD). The instrument used in our study is a frequency-domain tissue oximeter which employs intensity modulated (110 MHz) laser diodes. We examined 9 subjects, 3 of which were controls and 6 were patients affected by stage II PVD. The optical probe was located on the calf muscle of the subjects. The measurement protocol consisted of: (1) baseline (approximately 5 min); (2) stationary bicycle exercise (approximately 5 min); (3) recovery (approximately 15 min). The change in hemoglobin saturation during exercise ((Delta) Y) and the recovery time after exercise (trec) were significantly greater in the PVD patients ((Delta) Y equals -21 +/- 3%, trec equals 5.9 +/- 3.8 min) than in the control subjects ((Delta) Y equals 2 +/- 3%, trec equals 0.6 +/- 0.1 min).

Approach and Avoidance Sexual Goals in Couples with Provoked Vestibulodynia: Associations with Sexual, Relational, and Psychological Well-Being.

PubMed

Rosen, Natalie O; Muise, Amy; Bergeron, Sophie; Impett, Emily A; Boudreau, Gillian K

2015-08-01

Provoked vestibulodynia (PVD) is a prevalent vulvovaginal pain condition that is triggered primarily during sexual intercourse. PVD adversely impacts women's and their partners' sexual relationship and psychological well-being. Over 80% of women with PVD continue to have intercourse, possibly because of sexual goals that include wanting to pursue desirable outcomes (i.e., approach goals; such as a desire to maintain intimacy) and avoid negative outcomes (i.e., avoidance goals; such as avoiding a partner's disappointment). The aim of this study was to investigate associations between approach and avoidance sexual goals and women's pain, as well as the sexual, relational, and psychological well-being of affected couples. Women with PVD (N = 107) and their partners completed measures of sexual goals, sexual satisfaction, relationship satisfaction, and depression. Women also completed measures of pain during intercourse and sexual functioning. (1) Global Measure of Sexual Satisfaction Scale, (2) Dyadic Adjustment Scale-Revised or the Couple Satisfaction Index, (3) Beck Depression Inventory-II, (4) numerical rating scale of pain during intercourse, and (5) Female Sexual Function Index. When women reported higher avoidance sexual goals, they reported lower sexual and relationship satisfaction, and higher levels of depressive symptoms. In addition, when partners of women reported higher avoidance sexual goals, they reported lower relationship satisfaction. When women reported higher approach sexual goals, they also reported higher sexual and relationship satisfaction. Targeting approach and avoidance sexual goals could enhance the quality and efficacy of psychological couple interventions for women with PVD and their partners. © 2015 International Society for Sexual Medicine.

Neonatal outcome of very preterm twins: policy of planned vaginal or cesarean delivery.

PubMed

Sentilhes, Loïc; Oppenheimer, Anne; Bouhours, Anne-Charlotte; Normand, Estelle; Haddad, Bassam; Descamps, Philippe; Marpeau, Loïc; Goffinet, François; Kayem, Gilles

2015-07-01

The objective of the study was to compare neonatal mortality and morbidity in very preterm twins with the first twin in cephalic presentation in hospitals with a policy of planned vaginal delivery (PVD) and those with a policy of planned cesarean delivery (PCD). Women with preterm cephalic first twins delivered after preterm labor and/or premature preterm rupture of membranes from 26(0/7) to 31(6/7) weeks of gestation were identified from the databases of 6 perinatal centers and classified as PVD or PCD according to the center's management policy from 1999 to 2010. Severe neonatal morbidity was defined as any of the following: intraventricular hemorrhage grades 3-4, periventricular leukomalacia, necrotizing enterocolitis, bronchopulmonary dysplasia, and hospital death. The independent effect of the planned mode of delivery, defined by the center's management policy, was tested and quantified with a 2-level multivariable logistic regression. The PVD group included 248 women, and the PCD group 63. Maternal characteristics did not differ between the 2 groups. The rate of vaginal delivery was 85.9% (213 of 248) vs 20.6% (13 of 63) (P < .001), and the rate of cesarean delivery for the second twin was 1.6% (4 of 248) vs 4.8% (3 of 63) (P = .13) for PVD and PCD. PVD had no independent effect on either newborn hospital mortality or severe neonatal composite morbidity. A policy of planned vaginal delivery of very preterm twins with the first twin in cephalic presentation does not increase either severe neonatal morbidity or mortality. Copyright © 2015 Elsevier Inc. All rights reserved.

Passivation effect on optical and electrical properties of molecular beam epitaxy-grown HgCdTe/CdTe/Si layers

NASA Astrophysics Data System (ADS)

Kiran, Rajni; Mallick, Shubhrangshu; Hahn, Suk-Ryong; Lee, T. S.; Sivananthan, Sivalingam; Ghosh, Siddhartha; Wijewarnasuriya, P. S.

2006-06-01

The effects of passivation with two different passivants, ZnS and CdTe, and two different passivation techniques, physical vapor deposition (PVD) and molecular beam epitaxy (MBE), were quantified in terms of the minority carrier lifetime and extracted surface recombination velocity on both MBE-grown medium-wavelength ir (MWIR) and long-wavelength ir HgCdTe samples. A gradual increment of the minority carrier lifetime was reported as the passivation technique was changed from PVD ZnS to PVD CdTe, and finally to MBE CdTe, especially at low temperatures. A corresponding reduction in the extracted surface recombination velocity in the same order was also reported for the first time. Initial data on the 1/ f noise values of as-grown MWIR samples showed a reduction of two orders of noise power after 1200-Å ZnS deposition.

Women with provoked vestibulodynia experience clinically significant reductions in pain regardless of treatment: results from a 2-year follow-up study.

PubMed

Davis, Seth N P; Bergeron, Sophie; Binik, Yitzchak M; Lambert, Bernard

2013-12-01

Provoked vestibulodynia (PVD) is a prevalent genital pain syndrome that has been assumed to be chronic, with little spontaneous remission. Despite this assumption, there is a dearth of empirical evidence regarding the progression of PVD in a natural setting. Although many treatments are available, there is no single treatment that has demonstrated efficacy above others. The aims of this secondary analysis of a prospective study were to (i) assess changes over a 2-year period in pain, depressive symptoms, and sexual outcomes in women with PVD; and (ii) examine changes based on treatment(s) type. Participants completed questionnaire packages at Time 1 and a follow-up package 2 years later. Visual analog scale of genital pain, Global Measure of Sexual Satisfaction, Female Sexual Function Index, Beck Depression Inventory, Dyadic Adjustment Scale, and sexual intercourse attempts over the past month. Two hundred thirty-nine women with PVD completed both time one and two questionnaires. For the sample as a whole, there was significant improvement over 2 years on pain ratings, sexual satisfaction, sexual function, and depressive symptoms. The most commonly received treatments were physical therapy, sex/psychotherapy, and medical treatment, although 41.0% did not undergo any treatment. Women receiving no treatment also improved significantly on pain ratings. No single treatment type predicted better outcome for any variable except depressive symptoms, in which women who underwent surgery were more likely to improve. These results suggest that PVD may significantly reduce in severity over time. Participants demonstrated clinically significant pain improvement, even when they did not receive treatment. Furthermore, the only single treatment type predicting better outcomes was surgery, and only for depressive symptoms, accounting for only 2.3% of the variance. These data do not demonstrate the superiority of any one treatment and underscore the need to have control groups in

Provoked vestibulodynia: current perspectives

PubMed Central

Henzell, Helen; Berzins, Karen; Langford, Jennifer P

2017-01-01

Provoked vestibulodynia (PVD) refers to vulvar pain of at least 3 months duration, localized to the vestibule, provoked by touch and sexual activity and occurring in the absence of a clear identifiable cause. The clinical spectrum ranges from mild with distressing discomfort through to severe and disabling pain. Current understanding is that PVD is one of many chronic pain conditions characterized by sensitization of peripheral and central nociceptive pathways, with pain arising due to dysfunctional neuronal activity in the absence of painful stimuli. Pathophysiology is not well understood but is likely a complex interplay of environmental, genetic, psychological and immune factors. Care is multidisciplinary and follows general principles of chronic pain management with the addition of specific therapy tailored to address pelvic floor overactivity, and sexual and relationship difficulties. More recently, the therapeutic use of placebo is gaining traction in chronic pain research and is a very promising adjunctive therapy. The majority of women with PVD are managed outside of tertiary clinic settings, and care depends on availability and affordability of specialized services; however, much can be done by the primary health provider. PVD is common, and highly treatable, especially with early intervention, but unfortunately, many clinicians are unaware of this condition, and the biggest hurdle for women accessing treatment is obtaining a diagnosis. With treatment, most women can expect significant improvement, often with fairly simple interventions, although some women will benefit from referral to specialized centers. The aims of this article are twofold: firstly, to summarize current literature concerning PVD pathophysiology and management; secondly, to provide a framework for clinicians unfamiliar with vulvar medicine to understand and manage PVD. PMID:28979166

Differences in Pelvic Morphology Between Women With and Without Provoked Vestibulodynia.

PubMed

McLean, Linda; Thibault-Gagnon, Stephanie; Brooks, Kaylee; Goldfinger, Corrie; Pukall, Caroline; Chamberlain, Susan

2016-06-01

Pelvic morphology has been suggested to reflect increased tone and reduced strength of the pelvic floor muscles (PFMs) in women with provoked vestibulodynia (PVD) compared to healthy controls. We aimed to determine whether there are differences in pelvic morphology in the resting state, on maximum voluntary contraction (MVC), or on maximum effort Valsalva maneuver (MVM) between women with and without PVD. While imaged using ultrasound, 38 women with PVD and 39 controls relaxed their PFMs, performed 3 MVCs and performed 3 MVMs. Levator plate length (LPL), levator plate angle (LPA), and anorectal angle (ARA) were determined at rest, at MVC and at MVM. The displacement of the bladder neck (BN) on MVC and on MVM was also determined. Two-way ANCOVAs were used to evaluate the main effects of group and task, the interaction between group and task, and the effect of resting morphology on LPL, LPA, and ARA. A 2-way repeated-measures ANOVA was used to determine whether the groups differed in terms of BN displacement during the tasks. Women with PVD had smaller LPLs and LPAs than controls across all tasks. The significant group differences in LPL and LPA at MVC and MVM were no longer significant once the resting values were included as covariates in the models. Bladder neck displacement differed between the groups at MVM but not at MVC. Women with PVD display shorter LPL sand smaller LPAs than controls but their behavior does not differ when MVC and MVMs are performed. Our results do not support the hypothesis that women with PVD demonstrate abnormalities in PFM contractility on MVC or compliance on MVM. Copyright © 2016. Published by Elsevier Inc.

Impact of antiseptics on radical metabolism, antioxidant status and genotoxic stress in blood cells: povidone-iodine versus octenidine dihydrochloride.

PubMed

Wagner, Karl-Heinz; Jürss, Alice; Zarembach, Beate; Elmadfa, Ibrahim

2004-08-01

No sufficient data are available of the of antiseptics' influence on human blood cells. Effects of two antiseptics, povidone-iodine (PVD-I) versus octenidine dihydrochloride (OD), were tested on antioxidant status, radical formation, antioxidant defence enzymes and genotoxic stress in blood cells, in vitro. Human blood was taken by venipuncture, enriched with PVD-I or OD (0.0001-20% final concentration) and incubated at 37 degrees C between 30 and 120 min. alpha-Tocopherol was assessed in erythrocytes and granulocytes. Superoxide-dismutase (SOD) and glutathione (GSH) were determined in erythrocytes, the total anti-oxidative capacity (TAC) and malondialdehyde (MDA) in their ghosts. In granulocytes status of hydrogen peroxide (H(2)O(2)), superoxide anions and MDA was observed. Genotoxic stress was determined by counting sister chromatide exchanges (SCE) in lymphocytes after enrichment within 0.05-0.4% of antiseptics. Based on all biomarker tested, concentrations up to 0.05% incubated for 30 min did not affect cell metabolism. 1% and 10% PVD-I reduced the activity of SOD (-40%), GSH (-62%) and the content of alpha-tocopherol more than OD (p<0.05). No significant differences between the antiseptics were observed for TAC and MDA. H(2)O(2) and superoxide anions were significantly reduced after the 10% addition for both substances independent on the exposure. Without having changes in lipid oxidation, the reduction of antioxidative defence mechanisms must be due to the oxidation caused by the antiseptics, mainly PVD-I. An increased SCE rate was neither observed with PVD-I nor with OD within an enrichment with 0.05-0.4%. Higher concentrations (1% and more) could not be tested on SCE formation because they caused cell bursts. The results presented indicate that concentrations up to 0.05% incubated for 30 min are safe for exposing blood cells of healthy subjects.

Novel Applications of Radionuclide Imaging in Peripheral Vascular Disease

PubMed Central

Stacy, Mitchel R.; Sinusas, Albert J.

2015-01-01

Peripheral vascular disease (PVD) is a progressive atherosclerotic disease that leads to stenosis or occlusion of blood vessels supplying the lower extremities. Current diagnostic imaging techniques commonly focus on evaluation of anatomy or blood flow at the macrovascular level and do not permit assessment of the underlying pathophysiology associated with disease progression or treatment response. Molecular imaging with radionuclide-based approaches, such as PET and SPECT, can offer novel insight into PVD by providing non-invasive assessment of biological processes such as angiogenesis and atherosclerosis. This review discusses emerging radionuclide-based imaging approaches that have potential clinical applications in the evaluation of PVD progression and treatment. PMID:26590787

Temporally and spatially resolved plasma spectroscopy in pulsed laser deposition of ultra-thin boron nitride films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glavin, Nicholas R., E-mail: nicholas.glavin.1@us.af.mil, E-mail: andrey.voevodin@us.af.mil; School of Mechanical Engineering and Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907; Muratore, Christopher

2015-04-28

Physical vapor deposition (PVD) has recently been investigated as a viable, alternative growth technique for two-dimensional materials with multiple benefits over other vapor deposition synthesis methods. The high kinetic energies and chemical reactivities of the condensing species formed from PVD processes can facilitate growth over large areas and at reduced substrate temperatures. In this study, chemistry, kinetic energies, time of flight data, and spatial distributions within a PVD plasma plume ablated from a boron nitride (BN) target by a KrF laser at different pressures of nitrogen gas were investigated. Time resolved spectroscopy and wavelength specific imaging were used to identifymore » and track atomic neutral and ionized species including B{sup +}, B*, N{sup +}, N*, and molecular species including N{sub 2}*, N{sub 2}{sup +}, and BN. Formation and decay of these species formed both from ablation of the target and from interactions with the background gas were investigated and provided insights into fundamental growth mechanisms of continuous, amorphous boron nitride thin films. The correlation of the plasma diagnostic results with film chemical composition and thickness uniformity studies helped to identify that a predominant mechanism for BN film formation is condensation surface recombination of boron ions and neutral atomic nitrogen species. These species arrive nearly simultaneously to the substrate location, and BN formation occurs microseconds before arrival of majority of N{sup +} ions generated by plume collisions with background molecular nitrogen. The energetic nature and extended dwelling time of incident N{sup +} ions at the substrate location was found to negatively impact resulting BN film stoichiometry and thickness. Growth of stoichiometric films was optimized at enriched concentrations of ionized boron and neutral atomic nitrogen in plasma near the condensation surface, providing few nanometer thick films with 1:1 BN stoichiometry and

Multilayer (TiN, TiAlN) ceramic coatings for nuclear fuel cladding

NASA Astrophysics Data System (ADS)

Alat, Ece; Motta, Arthur T.; Comstock, Robert J.; Partezana, Jonna M.; Wolfe, Douglas E.

2016-09-01

In an attempt to develop an accident-tolerant fuel (ATF) that can delay the deleterious consequences of loss-of-coolant-accidents (LOCA), multilayer coatings were deposited onto ZIRLO® coupon substrates by cathodic arc physical vapor deposition (CA-PVD). Coatings were composed of alternating TiN (top) and Ti1-xAlxN (2-layer, 4-layer, 8-layer and 16-layer) layers. The minimum TiN top coating thickness and coating architecture were optimized for good corrosion and oxidation resistance. Corrosion tests were performed in static pure water at 360 °C and 18.7 MPa for up to 90 days. The optimized coatings showed no spallation/delamination and had a maximum of 6 mg/dm2 weight gain, which is 6 times smaller than that of a control sample of uncoated ZIRLO® which showed a weight gain of 40.2 mg/dm2. The optimized architecture features a ∼1 μm TiN top layer to prevent boehmite phase formation during corrosion and a TiN/TiAlN 8-layer architecture which provides the best corrosion performance.

Nanospecific Inhibition of Pyoverdine Siderophore Production in Pseudomonas Chlororaphis O6 by CuO Nanoparticles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dimkpa, Christian O.; McLean, Joan E.; Britt, David W.

2012-03-01

As traditional antibiotics become less effective against a growing number of pathogens, engineered nanoparticles (NPs) are becoming more widely applied as biocides. NPs of Ag, ZnO, and CuO exhibit dose-dependent antimicrobial activity; however, information is scant on the impact of sublethal levels of NPs on bacteria. In this paper, we evaluated the effect of a sublethal concentration (200 mg/L) of commercial CuO NPs on the expression of genes involved in the production of the fluorescent siderophore, pyoverdine (PVD) in the plant-beneficial bacterium Pseudomonas chlororaphis O6. PVDs are important in microbe-microbe and microbe-plant interactions, and are a virulence factor in pathogenicmore » pseudomonads. Cells challenged with the NPs had reduced amounts of PVD in their periplasm and the external medium. The NPs impaired the expression of genes involved in transport of the PVD precursor through the plasmamembrane, PVD maturation in the periplasm, and export through the outer membrane. Also, expression from one of three predicted Fe-PVD receptors was reduced by the NPs. As these effects were not observed for cells challenged with copper ions, this is a nanoparticlespecific phenomenon mediating cellular reprogramming in bacteria, affecting secondary metabolism and thus associated critical microbial processes. The regulation of bacterial genes and secondary metabolites by sublethal doses of a common metal oxide NP has strong environmental and medical implications.« less

Highly efficient gel-state dye-sensitized solar cells prepared using propionitrile and poly(vinylidene fluoride-co-hexafluoropropylene)

NASA Astrophysics Data System (ADS)

Venkatesan, Shanmuganathan; Hidayati, Noor; Liu, I.-Ping; Lee, Yuh-Lang

2016-12-01

Propionitrile (PPN) solvent based iodide/triiodide liquid-electrolyte is utilized to prepare highly efficient poly (vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) polymer gel electrolytes (PGEs) of dye-sensitized solar cells, aiming at improving the energy conversion efficiency as well as the stability of gel-state DSSCs. The concentrations effect of the PVdF-HFP on the properties of PGEs and the performance of the corresponding cells are studied. The results show that the in-situ gelation is performed for the PVdF-HFP concentration range of 8-18% at room temperature. However, increasing the concentration of polymer in the PGEs triggers a decrease in the diffusivity and conductivity of the PGEs, but an increase in the phase transition temperature of the PGEs. A high phase transition temperature is obtained for the PGEs with 18 wt% PVdF-HFP, which increase the long-term stability of the gel-state DSSC. By using the 18 wt% PVdF-HFP in the presence of 5 wt% TiO2 nanofillers (NFs), gel-state cells with an efficiency of 8.38% can be obtained, which is higher than that achieved by liquid-state cells (7.55%). After 1000 h test at room temperature (RT) and 50 °C, the cell can retain 96% and 82%, respectively, of its initial efficiency.

To say or not to say: Dyadic ambivalence over emotional expression and its associations with pain, sexuality, and distress in couples coping with provoked vestibulodynia.

PubMed

Awada, Nayla; Bergeron, Sophie; Steben, Marc; Hainault, Victoria-Ann; McDuff, Pierre

2014-05-01

Provoked vestibulodynia (PVD) is a highly prevalent and taxing female genital pain condition. Despite the intimate nature of this pain and the fact that affective factors such as anxiety have been shown to modulate its manifestations, no study has yet explored the emotional regulation of couples in which the woman suffers from PVD. Ambivalence over emotional expression (AEE) is an emotional regulation variable that quantifies the extent to which a person is comfortable with the way she or he expresses emotions. We examined whether the dyadic AEE of couples in which the woman suffers from PVD was differentially associated with women's pain and couples' psychological, sexual, and relational functioning. Couples (N = 254), in which the woman suffered from PVD, completed the AEE questionnaire. A couple typology of dyadic AEE was created. Dependent measures for both members of the couple were the global measure of sexual satisfaction scale, the Beck depression inventory II, and the revised dyadic adjustment scale. The female sexual function index and the sexual history form were used to assess the sexual function of women and men, respectively. Women also completed the pain rating index of the McGill pain questionnaire. Couples, in which both partners were considered low on AEE, had the highest scores on sexual satisfaction (P = 0.02) and function (P < 0.01), the lowest depression scores (P < 0.01), and the best dyadic adjustment (P = 0.02). No difference in pain intensity was found between couples. Findings suggest that, for couples in which the woman suffers from PVD, an emotional regulation that is low in ambivalence in both partners is associated with better psychological, sexual, and relational outcomes. Results indicate that emotional regulation may be important to consider in the assessment and treatment of couples coping with PVD. © 2014 International Society for Sexual Medicine.

Associations Between Penetration Cognitions, Genital Pain, and Sexual Well-being in Women with Provoked Vestibulodynia.

PubMed

Anderson, Alexandra B; Rosen, Natalie O; Price, Lisa; Bergeron, Sophie

2016-03-01

Provoked vestibulodynia (PVD) is a common vulvovaginal pain condition that negatively impacts women's psychological and sexual well-being. Controlled studies have found that women with PVD report greater negative and less positive cognitions about penetration; however, associations between these types of cognitions and women's pain and sexual well-being remain unknown. Further, researchers have yet to examine how interpersonal variables such as sexual communication may impact the association between women's penetration cognitions and PVD outcomes. We examined associations between vaginal penetration cognitions and sexual satisfaction, sexual function, and pain in women with PVD, as well as the moderating role of sexual communication. Seventy-seven women (M age = 28.32, SD = 6.19) diagnosed with PVD completed the catastrophic and pain cognitions and positive cognitions subscales of the Vaginal Penetration Cognition Questionnaire, as well as the Dyadic Sexual Communication Scale. Participants also completed measures of sexual satisfaction, sexual function, and pain. Dependent measures were the (i) Global Measure of Sexual Satisfaction Scale; (ii) Female Sexual Function Index; and (iii) Present Pain Intensity scale of the McGill Pain Questionnaire, with reference to pain during vaginal intercourse. Women's lower catastrophic and pain cognitions, higher positive cognitions, and higher sexual communication were each uniquely associated with higher sexual satisfaction and sexual function. Lower catastrophic and pain cognitions also were associated with women's lower pain. For women who reported higher sexual communication, as positive cognitions increased, there was a significantly greater decrease in pain intensity during intercourse compared to women who reported lower levels of sexual communication. Findings may inform cognitive-behavioral interventions aimed at improving the pain and sexual well-being of women with PVD. Targeting the couple's sexual communication

Pulse oximetry in the evaluation of peripheral vascular disease.

PubMed

Jawahar, D; Rachamalla, H R; Rafalowski, A; Ilkhani, R; Bharathan, T; Anandarao, N

1997-08-01

The role of pulse oximetry in the evaluation of peripheral vascular disease (PVD) was investigated. In addition, the value of elevating the limb to improve the sensitivity of detection of PVD by the pulse oximeter was also determined. Pulse oximetry reading in the toes were obtained in 40 young, healthy volunteers and in 40 randomly selected patients referred to the vascular investigation laboratory over a period of two months. All 40 healthy volunteers had normal pulse oximetry readings. Normal pulse oximetry reading in the toes was defined as > 95% O2 Sat and +/-2 of finger pulse oximetry reading. In all 40 patients, pulse oximetry readings were either normal or not detected at all. Since there was no gradation in decrease in the pulse oximetry reading with severity of disease or with elevation of the patient's lower extremity, an absent or no reading was considered as an abnormal result from the test. The frequency of abnormal pulse oximetry readings increased significantly in groups with abnormal ankle-brachial pressure index (ABPI) and also varied significantly with elevation of the patients' lower limbs. In patients with no PVD detected by Doppler (ABPI > 0.9), pulse oximetry readings were normal in all. However, in patients with moderate PVD (ABPI, 0.5-0.9), 84% of the patients' lower limbs had normal pulse oximetry readings and 16% had an abnormal reading at baseline level (flat). An additional 12% of the lower limbs in this group had an abnormal reading on elevation of the limb to 12 inches. In patients with severe PVD (ABPI < 0.5), 54% of the patients' lower limbs had an abnormal reading at baseline and an additional 23% had an abnormal reading at elevation of the limb to 12 inches. In conclusion, pulse oximetry was not a sensitive test for detecting early PVD.

Posterior hyaloid detachment and internal limiting membrane peeling assisted by anthocyanins from acai fruit (Euterpe oleracea) and 10 other natural vital dyes: experimental study in cadaveric eyes.

PubMed

Chen, Jane; Ferreira, Magno Antonio; Farah, Michel Eid; de Carvalho, André Maia; Alves Ferreira, Raquel Eustaquio; de Moraes Filho, Milton Nunes; Souza Lima-Filho, Acácio Alves; Lago, João Henrique G; Sartorelli, Patricia; Rodrigues, Eduardo Buchele; Ferreira, Eber; Peris, Cristiane; Maia, Maurício

2013-01-01

The purpose of this study was to determine whether natural dyes facilitate posterior hyaloid detachment (posterior vitreous detachment [PVD]) and retinal internal limiting membrane (ILM) peeling in human eyes. Open-sky vitrectomy with posterior hyaloid and ILM removal was performed in 86 human cadaveric eyes. After core vitrectomy, 11 different dyes were injected into the vitreous cavity to aid hyaloid detachment and ILM removal. The dyes were allowed to settle on the macula for 5 minutes after PVD and were removed by mechanical aspiration. Intraocular forceps were used for ILM peeling, which was confirmed by light microscopy of the peeled tissue. Acai fruit (Euterpe oleracea) extract and 10 additional dyes from plants or animal sources were tested: pomegranate (Punica granatum), logwood (Haematoxylum campechianum), chlorophyll extract from alfalfa (Medicago sativa), cochineal (Dactylopius coccus), hibiscus (Hibiscus rosa-sinensis), indigo (Indigofera tinctoria), paprika (Capiscum annuum), turmeric (Curcuma longa), old fustic (Maclura tinctoria), and grape (Vitis vinifera). The dyes facilitated PVD and ILM peeling. Acai fruit (E. oleracea) extract, logwood (H. campechianum), cochineal (D. coccus), and old fustic (M. tinctoria) facilitated PVD in all cases; dye-assisted PVD was compared with triamcinolone-assisted PVD performed previously in a comparative model. Acai fruit (E. oleracea) extract, cochineal (D. coccus), and chlorophyll extract from alfalfa (M. sativa) showed the best capability for ILM staining; dye-assisted ILM removal was compared with the ILM peeling guided by indocyanine green staining performed previously in a comparative model. Light microscopy confirmed the ILM removal in all cases. Anthocyanin dye of the acai fruit (E. oleracea) and the dyes from cochineal (D. coccus) and chlorophyll extract from alfalfa (M. sativa) resulted in the best capability for posterior hyaloid and ILM staining in human cadaveric eyes and may be a useful tool for

Perceptual visual dysfunction, physical impairment and quality of life in Bangladeshi children with cerebral palsy.

PubMed

Mitry, D; Williams, C; Northstone, K; Akter, A; Jewel, J; Khan, N; Muhit, M; Gilbert, C E; Bowman, R

2016-09-01

Cerebral palsy (CP) is the most common cause of motor disability in children and is often accompanied by sensory and/or cognitive impairment. The aim of this study was to characterise visual acuity impairment, perceptual visual dysfunction (PVD) and physical disability in a community-based sample of Bangladeshi children with CP and to assess the impact of these factors on the quality of life of the children. A key informant study was used to recruit children with CP from Sirajganj district. Gross Motor Function Classification System (GMFCS) levels and visual impairment were assessed by a physiotherapist and an optometrist, respectively. Assessments of visual perception were performed and standardised questionnaires were administered to each child's main carer to elicit indicators of PVD and parent-reported health-related quality of life. A generalised linear regression analysis was conducted to assess the determinants of the quality of life scores. 180 children were recruited. The median age was 8 years (IQR: 6-11 years); 112 (62%) were male; 57 (32%) had visual acuity impairment and 95 (53%) had some parent-reported PVD. In analyses adjusted for age, sex, GMFCS and acuity impairment, visual attention (p<0.001) and recognition/navigation (p<0.001) were associated with total health-related quality of life, and there were similar trends for total PVD score (p=0.006) and visual search (p=0.020). PVD is an important contributor in reducing quality of life in children with CP, independent of motor disability and acuity impairment. Better characterisation of PVD is important to help design interventions for affected children, which may improve their quality of life. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Conductivity of gel polymer electrolytes doped with solutions of phosphonic acid or protic ionic liquids

NASA Astrophysics Data System (ADS)

Shmukler, Liudmila E.; Fadeeva, Yuliya A.; Glushenkova, Ekaterina V.; Nguyen, Van Thuc; Safonova, Liubov P.

2018-04-01

The proton-conducting gel electrolytes (PCGEs) based on PMMA, PVdF or PVdF-HFP doped with solutions of phosphonic acid or ammonium based protic ionic liquids (PILs) in DMF have been synthesized. Rather high values of the conductivity (10-4-10-3 S cm-1) have been reached at low dopant concentrations (up to 1 mol l-1). The influence of the nature of both polymeric matrix and dopant as well as dopant concentration on the conductivity values was discussed. It was established that the dependence of conductivity on the nature of dopant, but not the polymeric matrix, was more pronounced.

Influence of the Vitreoretinal Interface on the Treatment with Anti-VEGF for Exudative Age-Related Macular Degeneration.

PubMed

Gil, Pedro; Gil, João; Oliveira, Nuno; Laíns, Inês; Camilo, Eduardo Nery Rossi; Fonseca, Cristina; Raimundo, Miguel; Cachulo, Maria da Luz; Silva, Rufino

2018-05-07

To investigate the influence of the vitreoretinal interface on the outcomes of different ranibizumab regimens for exudative age-related macular degeneration. We conducted a retrospective subanalysis of 2 prospective clinical trials. Patients were treated with ranibizumab for 12 months according to 3 different regimens: pro-re-nata (PRN), treat and extend (T&E), and monthly. Vitreoretinal interface was assessed for absence (group ON) or presence (group OFF) of posterior vitreous detachment (PVD). We included 64 eyes from 64 patients. Visual improvement was poorer for group ON (0.3 ± 10.7 letters) than for group OFF (9.2 ± 13.3; p = 0.007). A significant difference in letters of improvement between groups was observed in the PRN cohort (ON: -5.0 ± 12.9; OFF: 11.4 ± 11.9; p = 0.003), but not in the cohorts with monthly (ON: 5.7 ± 7.8; OFF: 7.9 ± 15.2; p = 0.735) or T&E (ON: 4.3 ± 4.3; OFF: 7.8 ± 11.1; p = 0.424) treatment. The negative impact of absence of PVD is regimen dependent, with monthly dosing providing similar outcomes to PVD patients. In the absence of PVD (group ON), PRN should be avoided, and T&E might be an alternative. © 2018 S. Karger AG, Basel.

Recommendations for Self-Report Outcome Measures in Vulvodynia Clinical Trials.

PubMed

Pukall, Caroline F; Bergeron, Sophie; Brown, Candace; Bachmann, Gloria; Wesselmann, Ursula

2017-08-01

Vulvodynia (idiopathic chronic vulvar pain) is a prevalent condition associated with significant and negative impacts in many areas of function. Despite the increased research interest in vulvodynia in recent years, recommendations for outcome measures for use in clinical trials are missing. The purpose of this paper, therefore, was to provide recommendations for outcome measures for vulvodynia clinical trials so that consistent measures are used across trials to facilitate between-study comparisons and the conduct of large multicenter trials, and to improve measurement of the multiple dimensions of vulvodynia. Given that provoked vestibulodynia (PVD)-characterized by provoked pain localized to the vaginal opening-is the most common subtype of vulvodynia and the current main focus of clinical trials, this paper focused on recommended outcome measures in PVD clinical trials. The framework used to guide the selection of outcome measures was based on the one proposed by the Initiative on Methods, Measurement, and Pain Assessment in Clinical Trials (IMMPACT). The IMMPACT framework provided a well-suited guideline for outcome measure recommendations in PVD clinical trials. However, given the provoked presentation of PVD and the significant impact it has on sexuality, modifications to some of the IMMPACT recommendations were made and specific additional measures were suggested. Measures that are specific to vulvovaginal pain are ideal for adoption in PVD clinical trials, and many such measures currently exist that allow the relevant IMMPACT domains to be captured.

Differences in the Biometry of the Levator Hiatus at Rest, During Contraction, and During Valsalva Maneuver Between Women With and Without Provoked Vestibulodynia Assessed by Transperineal Ultrasound Imaging.

PubMed

Thibault-Gagnon, Stéphanie; McLean, Linda; Goldfinger, Corrie; Pukall, Caroline; Chamberlain, Susan

2016-02-01

Pelvic floor muscle (PFM) involvement is suspected in the pathophysiology of provoked vestibulodynia (PVD); however, the underlying mechanisms are unclear. PFM morphology can be inferred from the biometry of the levator hiatus determined through dynamic ultrasound imaging. The aim of this study was to determine the nature of PFM involvement in women with PVD via an evaluation of the biometry of the levator hiatus at rest, upon maximal voluntary contraction (MVC) of the PFMs, and upon maximal Valsalva maneuver (MVM). Thirty-eight women with PVD and 39 asymptomatic controls were imaged using 3D transperineal ultrasound. Levator hiatal dimensions (area; left-right [LR] and anteroposterior [AP] diameters) were measured at rest, on MVC, and on MVM. Differences in hiatal dimensions and in relative changes in dimensions from rest to MVC and from rest to MVM were compared between groups using separate 1-way analyses of variance for each measure and task. Analysis of covariance models were used to investigate the impact of levator hiatal dimensions at rest on the relative changes in the levator hiatal dimensions during MVC and MVM. Levator hiatal area, LR, and AP diameters, at rest, on MVC, and on MVM were the main outcome measures. Relative changes in hiatal dimensions were assessed as the percent change in hiatal area, LR diameter, and AP diameter. In comparison with controls, women with PVD had smaller hiatal areas at rest, on MVC, and on MVM, concurrent with smaller LR diameters on MVM. Women with PVD had a significantly smaller change in hiatal area on MVM than controls, but no differences were evident on MVC. In both groups, smaller levator hiatal dimensions at rest were associated with smaller relative decreases in dimensions on MVC and larger relative increases in dimensions on MVM. In comparison to controls, women with PVD appear to have narrower levator hiatus' and less capacity to distend their hiatus on Valsalva. The state of the PFMs at rest appears to

Sexual Assertiveness Mediates the Associations Between Partner Facilitative Responses and Sexual Outcomes in Women With Provoked Vestibulodynia.

PubMed

McNicoll, Gabrielle; Corsini-Munt, Serena; O Rosen, Natalie; McDuff, Pierre; Bergeron, Sophie

2017-10-03

Provoked vestibulodynia (PVD) is a recurrent idiopathic vulvo-vaginal pain associated with negative sexual and psychological consequences. Facilitative partner responses to pain are currently receiving empirical attention because they are positively associated with women's sexual outcomes. However, the mechanisms through which facilitative responses to pain are associated with these outcomes have not been examined. One potential mechanism is sexual assertiveness, which has been found to be associated with better sexual function and satisfaction in women with PVD. The present study examined whether women's sexual assertiveness mediated the association between women's perception of facilitative partner responses and women's sexual function and satisfaction. Women (N = 140) with PVD symptomatology completed self-reported questionnaires evaluating their perception of their partners' facilitative responses, and their own sexual assertiveness, sexual function, and sexual satisfaction. Dependent measures were sexual function measured by the Female Sexual Function Index and sexual satisfaction assessed by the Global Measure of Sexual Satisfaction Scale. Results indicated that women's higher sexual assertiveness mediated the association between their greater perceived facilitative partner responses and their improved sexual function and satisfaction. Findings suggest a potential mechanism through which partner responses may be associated with women's sexual outcomes.

Significance of a Noble Metal Nanolayer on the UV and Visible Light Photocatalytic Activity of Anatase TiO2 Thin Films Grown from a Scalable PECVD/PVD Approach.

PubMed

Baba, Kamal; Bulou, Simon; Quesada-Gonzalez, Miguel; Bonot, Sébastien; Collard, Delphine; Boscher, Nicolas D; Choquet, Patrick

2017-11-29

UV and visible light photocatalytic composite Pt and Au-TiO 2 coatings have been deposited on silicon and glass substrates at low temperature using a hybrid ECWR-PECVD/MS-PVD process. Methylene blue, stearic acid, and sulfamethoxazole were used as dye, organic, and antibiotic model pollutants, respectively, to demonstrate the efficiency of these nanocomposite coatings for water decontamination or self-cleaning surfaces applications. Raman investigations revealed the formation of anatase polymorph of TiO 2 in all synthesized coatings with a shifting of the main vibrational mode peak to higher wavenumber in the case of Au-TiO 2 coating, indicating an increase number of crystalline defects within this coating. Because of the difference of the chemical potentials of each of the investigated noble metals, the sputtered metal layers exhibit different morphology. Pt sputtered atoms, with high surface adhesion, promote formation of a smooth 2D layer. On the other hand, Au sputtered atoms with higher cohesive forces promote the formation of 5-10 nm nanoparticles. As a result, the surface plasmon resonance phenomenon was observed in the Au-TiO 2 coatings. UV photoactivity of the nanocomposite coatings was enhanced 1.5-3 times and 1.3 times for methylene blue and stearic acid, respectively, thanks to the enhancement of electron trapping in the noble metal layer. This electron trapping phenomenon is higher in the Pt-TiO 2 coating because of its larger work function. On the other hand, the enhancement of the visible photoactivity was more pronounced (3 and 7 times for methylene blue and stearic acid, respectively) in the case of Au-TiO 2 thanks to the surface plasmon resonance. Finally, these nanocomposite TiO 2 coatings exhibited also a good ability for the degradation of antibiotics usually found in wastewater such as sulfamethoxazole. However, a complementary test have showed an increase of the toxicity of the liquid medium after photocatalysis, which could be due the

C-Ni-Pd and CNT-Ni-Pd film's molecular and crystalline structure investigations by FTIR spectroscopy and XRD diffraction

NASA Astrophysics Data System (ADS)

Stepińska, Izabela; Czerwosz, ElŻbieta; Diduszko, Ryszard; Kozłowski, Mirosław; Wronka, Halina

2017-08-01

In this work molecular and crystalline structure of new type of nanocomposite films were investigated. These films compose of CNT decorated with palladium nanograins. They were prepared on a base of C-Ni films modified in CVD process. C-Ni nanocomposite films were obtained by PVD process and their modification by CVD leads to a growth of CNT film. CNTs-Ni or C-Ni films were treated with additional PVD process with palladium. Nickel and palladium acetate and fulleren C60 are precursors of films in PVD process. FTIR spectroscopy was used to studied the molecular structure of film in every stage of preparation . The crystalline structure of these films was studied by X-ray diffraction. SEM (scanning electron microscopy) was applied to investigate film's surface topography.

Are there still roles for exocrine bladder drainage and portal venous drainage for pancreatic allografts?

PubMed

Young, Carlton J

2009-02-01

Controversy remains regarding the best methodology of handling exocrine pancreatic fluid and pancreatic venous effluent. Bladder drainage has given way to enteric drainage. However, is there an instance in which bladder drainage is preferable? Also, hyperinsulinemia, as a result of systemic venous drainage (SVD), is claimed to be proatherosclerotic, whereas portal venous drainage (PVD) is more physiologic and less atherosclerotic. Bladder drainage remains a viable method of exocrine pancreas drainage, but evidence is sparse that measuring urinary amylase has a substantial benefit in the early detection of acute rejection in all types of pancreas transplants. Currently, there is no incontrovertible evidence that systemic hyperinsulinemia is proatherosclerotic, whereas recent metabolic studies on SVD and PVD showed that there was no benefit to PVD. Given the advent of newer immunosuppressive agents and overall lower acute rejection rates, the perceived benefit of bladder drainage as a means to measure urinary amylase as an early marker of rejection has not been substantiated. However, there may be a selective role for bladder drainage in 'high risk' pancreases. Also, without a clear-cut metabolic benefit to PVD over SVD, it remains the surgeon's choice as to which method to use.

An RGB colour image steganography scheme using overlapping block-based pixel-value differencing

PubMed Central

Pal, Arup Kumar

2017-01-01

This paper presents a steganographic scheme based on the RGB colour cover image. The secret message bits are embedded into each colour pixel sequentially by the pixel-value differencing (PVD) technique. PVD basically works on two consecutive non-overlapping components; as a result, the straightforward conventional PVD technique is not applicable to embed the secret message bits into a colour pixel, since a colour pixel consists of three colour components, i.e. red, green and blue. Hence, in the proposed scheme, initially the three colour components are represented into two overlapping blocks like the combination of red and green colour components, while another one is the combination of green and blue colour components, respectively. Later, the PVD technique is employed on each block independently to embed the secret data. The two overlapping blocks are readjusted to attain the modified three colour components. The notion of overlapping blocks has improved the embedding capacity of the cover image. The scheme has been tested on a set of colour images and satisfactory results have been achieved in terms of embedding capacity and upholding the acceptable visual quality of the stego-image. PMID:28484623

Nematic-like stable glasses without equilibrium liquid crystal phases

DOE Data Explorer

Gomez, Jaritza [Department of Chemistry, University of Wisconsin-Madison, Madison, Wisconsin 53706, USA; Gujral, Ankit [Department of Chemistry, University of Wisconsin-Madison, Madison, Wisconsin 53706, USA; Huang, Chengbin [School of Pharmacy, University of Wisconsin-Madison, 777 Highland Avenue, Madison, Wisconsin 53705-2222, USA; Bishop, Camille [Department of Chemistry, University of Wisconsin-Madison, Madison, Wisconsin 53706, USA; Yu, Lian [School of Pharmacy, University of Wisconsin-Madison, 777 Highland Avenue, Madison, Wisconsin 53705-2222, USA; Ediger, Mark [Department of Chemistry, University of Wisconsin-Madison, Madison, Wisconsin 53706, USA

2017-02-01

We report the thermal and structural properties of glasses of posaconazole, a rod-like molecule, prepared using physical vapor deposition (PVD). PVD glasses of posaconazole can show substantial molecular orientation depending upon the choice of substrate temperature, Tsubstrate, during deposition.Ellipsometry and IR measurements indicate that glasses prepared at Tsubstrate very near the glass transition temperature (Tg) are highly ordered. For these posaconazole glasses, the orientation order parameter is similar to that observed in macroscopically aligned nematic liquid crystals, indicating that the molecules are mostly parallel to one another and perpendicular to the interface. To our knowledge, these are the most anisotropic glasses ever prepared by PVD from a molecule that does not form equilibrium liquid crystal phases. These results are consistent with a previously proposed mechanism in which molecular orientation in PVD glasses is inherited from the orientation present at the free surface of the equilibrium liquid. This mechanism suggests that molecular orientation at the surface of the equilibrium liquid of posaconazole is nematic-like. Posaconazole glasses can show very high kinetic stability; the isothermal transformation of a 400 nm glass into the supercooled liquid occurs via a propagating front that originates at the free surface and requires ~105 times the structural relaxation time of the liquid (τα). We also studied the kinetic stability of PVD glasses of itraconazole, which is a structurally similar molecule with equilibrium liquid crystal phases. While itraconazole glasses can be even more anisotropic than posaconazole glasses, they exhibit lower kinetic stability.

High throughput production of nanocomposite SiO x powders by plasma spray physical vapor deposition for negative electrode of lithium ion batteries.

PubMed

Homma, Keiichiro; Kambara, Makoto; Yoshida, Toyonobu

2014-04-01

Nanocomposite Si/SiO x powders were produced by plasma spray physical vapor deposition (PS-PVD) at a material throughput of 480 g h -1 . The powders are fundamentally an aggregate of primary ∼20 nm particles, which are composed of a crystalline Si core and SiO x shell structure. This is made possible by complete evaporation of raw SiO powders and subsequent rapid condensation of high temperature SiO x vapors, followed by disproportionation reaction of nucleated SiO x nanoparticles. When CH 4 was additionally introduced to the PS-PVD, the volume of the core Si increases while reducing potentially the SiO x shell thickness as a result of the enhanced SiO reduction, although an unfavorable SiC phase emerges when the C/Si molar ratio is greater than 1. As a result of the increased amount of Si active material and reduced source for irreversible capacity, half-cell batteries made of PS-PVD powders with C/Si = 0.25 have exhibited improved initial efficiency and maintenance of capacity as high as 1000 mAh g -1 after 100 cycles at the same time.

Sexual and relationship intimacy among women with provoked vestibulodynia and their partners: associations with sexual satisfaction, sexual function, and pain self-efficacy.

PubMed

Bois, Katy; Bergeron, Sophie; Rosen, Natalie O; McDuff, Pierre; Grégoire, Catherine

2013-08-01

Provoked vestibulodynia (PVD) is the most frequent subtype of vulvodynia. Women report negative consequences of PVD on their sexual and romantic relationships. Researchers have recently highlighted the importance of examining interpersonal factors such as intimacy, and of including both women and their partners in study designs. The aim of this study was to investigate sexual and relationship intimacy as defined by the Interpersonal Process Model of Intimacy and their associations with sexual satisfaction, sexual function, pain self-efficacy, and pain intensity among women with PVD and their partners. Ninety-one heterosexual women (M age = 27.38, SD = 6.04) diagnosed with PVD and their partners (M age = 29.37, SD = 7.79) completed measures of sexual and relationship intimacy, sexual satisfaction, sexual function, pain self-efficacy, and pain intensity. Dependent measures were the (i) Global Measure of Sexual Satisfaction Scale; (ii) Female Sexual Function Index; (iii) Painful Intercourse Self-Efficacy Scale; and (iv) visual analog scale of pain intensity during intercourse. After controlling for women's age, women's greater sexual intimacy (β = 0.49, P < 0.001) was associated with women's greater sexual satisfaction and higher pain self-efficacy (β = 0.39, P = 0.001), beyond the effects of partners' sexual intimacy. Also, women's greater sexual intimacy (β = 0.24, P = 0.05) and women's greater relationship intimacy (β = 0.54, P = 0.003) were associated with greater women's sexual function, beyond the effects of partners' sexual and relationship intimacy. Women's self-reported sexual and relationship intimacy in the couple relationship may promote higher sexual satisfaction, sexual function, and pain self-efficacy, as well as possibly foster greater sexual well-being among women with PVD. The authors discuss implications for the inclusion of emotional and interpersonal aspects of the couple's dynamic in clinical

It Takes Two: Sexual Communication Patterns and the Sexual and Relational Adjustment of Couples Coping With Provoked Vestibulodynia.

PubMed

Rancourt, Kate M; Flynn, Michelle; Bergeron, Sophie; Rosen, Natalie O

2017-03-01

Provoked vestibulodynia (PVD) is a prevalent vulvovaginal pain condition that is associated with sexual and relational consequences for women and their partners. Greater perceived quality of sexual communication has been associated with women's lower pain during intercourse and with couples' better sexual and relational well-being. Whether couples' collaborative (eg, expressing feelings or problem solving) and negative (eg, withdrawing or criticizing) sexual communication patterns (SCPs) are differentially associated with couples' adjustment to PVD is unknown. To examine associations between collaborative and negative SCPs and women's pain and the sexual and relationship adjustment of women with PVD and their partners. Women diagnosed with PVD (N = 87) and their partners completed the Sexual Communication Patterns Questionnaire and measurements of pain (women only), sexual functioning, sexual satisfaction, sexual distress, and relationship satisfaction. (i) Numerical rating scale of pain during intercourse, (ii) Female Sexual Function Index and International Index of Erectile Function, (iii) Global Measure of Sexual Satisfaction, (iv) Female Sexual Distress Scale-Revised, and (v) Couple Satisfaction Index. When women reported greater collaborative SCP, they also reported higher sexual and relationship satisfaction. When women reported greater negative SCP, they reported less relationship satisfaction and had partners who reported greater sexual distress. When partners reported greater collaborative SCP, they also reported higher relationship satisfaction and had female partners who were less sexually distressed. When partners reported higher negative SCP, they also reported less relationship satisfaction. There were no associations between SCP and women's or partners' sexual functioning or women's pain. Collaborative SCP may benefit couples' sexual and relational well-being, whereas negative SCP may impede sexual and relational adjustment to PVD. Findings

The Impact of a Woman's Dyspareunia and Its Treatment on Her Intimate Partner: A Qualitative Analysis.

PubMed

Sadownik, Leslie A; Smith, Kelly B; Hui, Amber; Brotto, Lori A

2017-08-18

This study explored the experiences of male partners of women with dyspareunia, secondary to provoked vestibulodynia (PVD), who participated in the Multidisciplinary Vulvodynia Program (MVP). Participants were 16 men between 22 and 45 years of age. Data were collected with semi-structured interviews and analyzed for themes. Men were interviewed about (a) the impact of the woman's PVD on themselves; and (b) the impact of the MVP on themselves. Participants experienced negative psychological effects (e.g., guilt) in addition to activating emotions (e.g., frustration). They reported diminished quantity and quality of sex. In the relationship, PVD caused strain, communication challenges, and possibilities for growth. The benefits, perceived by the partner, of the women participating in the treatment program included improvements in knowledge, communication, and psychological and sexual health.

Posterior Vitreous Detachment With Microplasmin Alters the Retinal Penetration of Intravitreal Bevacizumab (Avastin) in Rabbit Eyes

PubMed Central

Goldenberg, David T.; Giblin, Frank J.; Cheng, Mei; Chintala, Shravan K.; Trese, Michael T.; Drenser, Kimberly A.; Ruby, Alan J.

2010-01-01

Purpose Intravitreal bevacizumab (Avastin) is frequently used for the treatment of age-related macular degeneration. Previous studies have demonstrated full thickness retinal penetration. Intravitreal recombinant microplasmin (MP) has been shown to successfully induce a posterior vitreous detachment (PVD) and vitreous liquefaction in animals. It has been suggested that a PVD may alter the retinal penetration of molecules in the vitreous cavity. The aim of this study was to compare bevacizumab (BV) retinal penetration in rabbit eyes with and without a MP-induced PVD. Methods Twelve adult rabbits were injected with 0.1 ml (0.4 mg) of MP into the vitreous cavity of one eye. One week later, the rabbits were injected with 0.05 ml (1.25 mg) of BV into both eyes. Both eyes of three rabbits each were harvested at 6, 12, 24, and 72 hours after the BV injection. Frozen retinal cross sections were prepared, and BV retinal penetration was evaluated with immunohistochemistry using a fluorescence-labeled antibody against BV. Two eyes from one rabbit were not injected with either agent and used as controls to compare the background autofluorescence. Peripapillary retinal sections were recorded with a digital camera, and intra-retinal BV fluorescence-labeled antibody was measured by qualitative photographic interpretation. Two additional rabbits received an intravitreal injection of 0.1 ml of MP in one eye. One week later, both eyes from each rabbit were enucleated and frozen retinal sections were prepared and analyzed with light microscopy to evaluate for histologic damage. Results Full thickness BV retinal penetration was observed throughout the retina in both eyes of each rabbit. All of the MP-injected eyes exhibited increased antibody labeling in retinas evaluated 6, 12, and 24 hours after BV injection when compared with the contralateral non-MP-injected eyes. By three days after BV injection, all eyes demonstrated decreased antibody labeling compared to earlier time periods

Chronic subjective dizziness: Analysis of underlying personality factors.

PubMed

Chiarella, G; Petrolo, C; Riccelli, R; Giofrè, L; Olivadese, G; Gioacchini, F M; Scarpa, A; Cassandro, E; Passamonti, L

2016-11-03

Chronic subjective dizziness (CSD) is characterized by persistent dizziness, unsteadiness, and hypersensitivity to one's own motion or exposure to complex visual stimuli. CSD may be triggered, in predisposed individuals with specific personality traits, by acute vestibular diseases. CSD is also thought to arise from failure to re-establish normal balance strategies after resolution of acute vestibular events which may be modulated by diathesis to develop anxiety and depression. To confirm the role of personality traits linked to anxiety and depression (i.e., neuroticism, introversion, low openness) as predisposing factors for CSD and to evaluate how individual differences in these personality traits are associated with CSD severity. We compared 19 CSD patients with 24 individuals who had suffered from periferal vestibular disorders (PVD) (i.e., Benign Paroxysmal Postural Vertigo or Vestibular Neuritis) but had not developed CSD as well as with 25 healthy controls (HC) in terms of personality traits, assessed via the NEO-PI-R questionnaire. CSD patients, relative to PVD patients and HCs, scored higher on the anxiety facet of neuroticism. Total neuroticism scores were also significantly associated with dizziness severity in CSD patients but not PVD patients. Pre-existing anxiety-related personality traits may promote and sustain the initial etiophatogenetic mechanisms linked with the development of CSD. Targeting anxiety-related mechanisms in CSD may be therefore a promising way to reduce the disability associated with CSD.

[Cardiovascular disease in patients with type 1 and type 2 diabetes in Spain].

PubMed

Ortega, Emilio; Amor, Antonio J; Rojo-Martínez, Gemma; Castell, Conxa; Giménez, Marga; Conget, Ignacio

2015-09-21

To describe the prevalence of cardiovascular disease (CVD) in type 1 diabetes (T1DM) and to compare it with that observed in type 2 diabetes (T2DM) and normal population in Spain. Cross-sectional study (18-70 years-old). Information on CVD was available from a nurse-administered questionnaire (Di@bet.es Study, NORMAL=3,430, T2DM=312) and from a physician reporting form (T1DM=1,382). Differences in the crude and adjusted prevalence of coronary heart (CHD), cerebrovascular (CNSD), peripheral vascular (PVD) and overall CV (CVD) disease were investigated between T1DM vs. NORMAL, and T1DM vs. T2DM groups. We found differences in age, body mass index, proportion of women, dyslipemia and antihypertensive medication between T1DM vs. NORMAL and T1DM vs. T2DM (all P<.001). Smoking prevalence was not different between T1DM vs. T2DM and it was lower in T1DM compared to NORMAL (P<.0001). The percentage of CHD, CNSD, PVD, and overall CVD in T1DM vs. NORMAL was 3.0 vs. 2.5 (P=.31), 0.70 vs. 1.10 (P=.22), 2.61 vs. 0.20 (P<.0001), and 5.1 vs. 3.44 (P<.01), respectively. The prevalence in T2DM (vs. T1DM) was 11.3 (P<.0001), 3.5 (P<.0001), 4.2 (P=.13), and 17% (P<.0001), respectively. Multiple logistic regression adjusted models showed a higher prevalence of CHD (odds ratio [OR] 2.27, 95% confidence interval [95% CI] 1.41-3.67), PVD (OR 15.35, 95% CI 5.61-42.04), and overall CVD (OR 2.32, 95% CI 1.55-3.46), but not for CNSD (OR 0.49, 95% CI 0.19-1.27) in T1DM compared to NORMAL. No differences were found between T1DM and T2DM. We found a higher prevalence of CVD in a Mediterranean population of T1DM individuals compared with non-diabetic subjects. This prevalence was similar to that observed in T2DM. Copyright © 2014 Elsevier España, S.L.U. All rights reserved.

Importance of calcium and magnesium in water - water hardening

NASA Astrophysics Data System (ADS)

Barloková, D.; Ilavský, J.; Kapusta, O.; Šimko, V.

2017-10-01

Basic information about importance of calcium and magnesium in water, about their properties, effect to human health, problems what can cause under the lower (< 1 mmol/L) and higher (> 5 mmol/L) concentrations in water supply distribution systems, the most commonly used methods of water hardening are presented. The article contains the water hardening results carried out during the pilot plant experiments in WTP Hriňová and WTP Turček. For water hardening, treated water at the end of the process line, i.e., after coagulation, sedimentation and filtration, saturated with CO2 and filtrated through half-burnt dolomite material (PVD) was used. The results show that the filtration rate is 17.1 m/h in the case of WTP Hriňová and 15.2 m/h in the case of WTP Turček to achieve the recommended concentration of Ca and Mg in the treated water after the addition of CO2 and filtration through PVD. The longer the water contact time with PVD (depending on the CO2 content), the more water is enriched with magnesium, but the calcium concentration has not so much increased.

Low Contrast Dose Catheter-Directed CT Angiography (CCTA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Formosa, Amanda, E-mail: amandaformosa@yahoo.ca; Santos, Denise May, E-mail: contact@denisemaysantos.com; Marcuzzi, Daniel

2016-04-15

PurposeCatheter-directed computed tomography angiography (CCTA) has been shown to reduce the contrast volumes required in conventional CTA, thus minimizing the risk of contrast-induced nephropathy (CIN).Materials and MethodsA retrospective analysis was performed on cases where CCTA was used to assess access vessels prior to transfemoral aortic valve implantation (TAVI, n = 53), abdominal aortic aneurysm assessment for endovascular aneurysm repair (EVAR, n = 11), and peripheral vascular disease (PVD, n = 24).ResultsWe show that CCTA can image vasculature with adequate diagnostic detail to allow assessment of lower extremity disease, anatomic suitability for EVAR, as well as potential contraindications to TAVI. Average contrast volumes for pre-TAVI, pre-EVAR, andmore » PVD cases were 7, 11, and 28 mL, respectively.ConclusionThis study validates the use of CCTA in obtaining diagnostic images of the abdominal and pelvic vessels and in imaging lower extremity vasculature.« less

FpvA receptor involvement in pyoverdine biosynthesis in Pseudomonas aeruginosa.

PubMed

Shen, Jiangsheng; Meldrum, Allison; Poole, Keith

2002-06-01

Alignment of the Pseudomonas aeruginosa ferric pyoverdine receptor, FpvA, with similar ferric-siderophore receptors revealed that the mature protein carries an extension of ca. 70 amino acids at its N terminus, an extension shared by the ferric pseudobactin receptors of P. putida. Deletion of fpvA from the chromosome of P. aeruginosa reduced pyoverdine production in this organism, as a result of a decline in expression of genes (e.g., pvdD) associated with the biosynthesis of the pyoverdine peptide moiety. Wild-type fpvA restored pvd expression in the mutant, thereby complementing its pyoverdine deficiency, although a deletion derivative of fpvA encoding a receptor lacking the N terminus of the mature protein did not. The truncated receptor was, however, functional in pyoverdine-mediated iron uptake, as evidenced by its ability to promote pyoverdine-dependent growth in an iron-restricted medium. These data are consistent with the idea that the N-terminal extension plays a role in FpvA-mediated pyoverdine biosynthesis in P. aeruginosa.

Psychological Distress in Patients with Symptomatic Vitreous Floaters

PubMed Central

Yim, Kyung Mi; Seong, Su Jeong

2017-01-01

Purpose To evaluate the degree of psychological distress in symptomatic vitreous floater patients and to evaluate whether these psychological factors are associated with the severity of discomfort associated with vitreous floaters. Methods We recruited 61 patients with symptomatic vitreous floaters and 34 controls. The degree of posterior vitreous detachment (PVD) was evaluated using optical coherence tomography. We measured the level of depression, perceived stress, state, and trait anxiety and the degree of floater-associated discomfort with self-administered questionnaire. We compared psychological parameters between floater patients and control. We also compared clinical and psychological characteristics among different floater-associated discomfort severity groups. Results Symptomatic vitreous floater patients showed higher rate of complete PVD and higher psychological distress compared to the control. On multiple logistic regression analysis, complete PVD (p = 0.001), depression (p = 0.001), and younger age (p = 0.037) were significantly associated with symptomatic floaters. There were no significant differences in complete PVD rate among different discomfort groups, while severe discomfort group showed higher depression, perceived stress, and state and trait anxiety compared to the other two milder symptom groups. Conclusions Symptomatic vitreous floater patients showed substantial level of psychological distress, and the severity of floater symptoms was significantly associated with psychological distress. PMID:29375909

Psychological Distress in Patients with Symptomatic Vitreous Floaters.

PubMed

Kim, Yong-Kyu; Moon, Su Young; Yim, Kyung Mi; Seong, Su Jeong; Hwang, Jae Yeon; Park, Sung Pyo

2017-01-01

To evaluate the degree of psychological distress in symptomatic vitreous floater patients and to evaluate whether these psychological factors are associated with the severity of discomfort associated with vitreous floaters. We recruited 61 patients with symptomatic vitreous floaters and 34 controls. The degree of posterior vitreous detachment (PVD) was evaluated using optical coherence tomography. We measured the level of depression, perceived stress, state, and trait anxiety and the degree of floater-associated discomfort with self-administered questionnaire. We compared psychological parameters between floater patients and control. We also compared clinical and psychological characteristics among different floater-associated discomfort severity groups. Symptomatic vitreous floater patients showed higher rate of complete PVD and higher psychological distress compared to the control. On multiple logistic regression analysis, complete PVD ( p = 0.001), depression ( p = 0.001), and younger age ( p = 0.037) were significantly associated with symptomatic floaters. There were no significant differences in complete PVD rate among different discomfort groups, while severe discomfort group showed higher depression, perceived stress, and state and trait anxiety compared to the other two milder symptom groups. Symptomatic vitreous floater patients showed substantial level of psychological distress, and the severity of floater symptoms was significantly associated with psychological distress.

Microstructural Effects and Properties of Non-line-of-Sight Coating Processing via Plasma Spray-Physical Vapor Deposition

NASA Astrophysics Data System (ADS)

Harder, Bryan J.; Zhu, Dongming; Schmitt, Michael P.; Wolfe, Douglas E.

2017-08-01

Plasma spray-physical vapor deposition (PS-PVD) is a unique processing method that bridges the gap between conventional thermal spray and vapor phase methods, and enables highly tailorable coatings composed of a variety of materials in thin, dense layers or columnar microstructures with modification of the processing conditions. The strengths of this processing technique are material and microstructural flexibility, deposition speed, and potential for non-line-of-sight (NLOS) capability by vaporization of the feedstock material. The NLOS capability of PS-PVD is investigated here using yttria-stabilized zirconia and gadolinium zirconate, which are materials of interest for turbine engine applications. PS-PVD coatings were applied to static cylindrical substrates approximately 6-19 mm in diameter to study the coating morphology as a function of angle. In addition, coatings were deposited on flat substrates under various impingement configurations. Impingement angle had significant effects on the deposition mode, and microscopy of coatings indicated that there was a shift in the deposition mode at approximately 90° from incidence on the cylindrical samples, which may indicate the onset of more turbulent flow and PVD-like growth. Coatings deposited at non-perpendicular angles exhibited a higher density and nearly a 2× improvement in erosion performance when compared to coatings deposited with the torch normal to the surface.

Pitting corrosion resistance of nickel-titanium rotary instruments with different surface treatments in seventeen percent ethylenediaminetetraacetic Acid and sodium chloride solutions.

PubMed

Bonaccorso, Antonio; Tripi, Teresa Roberta; Rondelli, Gianni; Condorelli, Guglielmo Guido; Cantatore, Giuseppe; Schäfer, Edgar

2008-02-01

This study evaluated the pitting corrosion resistance of nickel-titanium (NiTi) rotary instruments with different surface treatments in 17% ethylenediaminetetraacetic acid (EDTA) and NaCl solutions. Electropolished RaCe instruments were allocated to group A, non-electropolished RaCe instruments to group B, and physical vapor deposition (PVD)-coated Alpha files to group C (10 instruments per group). Electrochemical measurements were carried out by using a potentiostat for galvanic current measurements. On the basis of electrochemical tests, no localized corrosion problems are to be expected in EDTA. In NaCl, pitting potential occurred at higher values for the electropolished and PVD instruments, indicating an increased corrosion resistance. There appears to be a risk of corrosion for NiTi instruments without surface treatments in contact with NaCl. NiTi files with PVD and electropolishing surface treatments showed an increase corrosion resistance.

Separator for lithium-sulfur battery based on polymer blend membrane

NASA Astrophysics Data System (ADS)

Freitag, Anne; Stamm, Manfred; Ionov, Leonid

2017-09-01

In this work we report a novel way of reducing the polysulfide shuttle in lithium-sulfur batteries by a new separator material. Polyvinylsulfate potassium salt (PVSK) as polymeric additive is introduced into a polyvinylidene fluoride-hexafluoropropylene (PVdF-HFP) matrix membrane to improve the battery performance. PVSK is expected to lower the polysulfide mobility due to interaction with the sulfonic group. PVdF-HFP/PVSK blend membranes are prepared and an UV/Vis polysulfide diffusion test clearly demonstrates the positive effect of PVSK. Electrochemical testing reveals a significant improvement of cycling stability up to more than 200 cycles. In addition, the effect of separator porosity to the polysulfide shuttle is investigated with PVdF-HFP membranes of different porosity. A simple polysulfide diffusion test and potentiostatic charge/discharge cycling clearly demonstrate that low separator porosity is favorable in a lithium-sulfur cell.

Integrating SIMNET into Heavy Task Force Tactical Training

DTIC Science & Technology

1994-10-01

the overlays will allow the battlemaster time to input them for display on the Plan View Display ( PVD ) for use in AARs. The time schedule must also...reconnaissance for both friendly and enemy forces to occupy. The stealth station, in conjunction with the Plan View Display ( PVD ), can be used to...was moved to another assembly area for armor crewman and Nuclear, Biological, and Chemical (NBC) skills testing. The battalion observer tested 25% to

Comorbid anxiety disorders alter the association between cardiovascular diseases and depression: the German National Health Interview and Examination Survey.

PubMed

Tully, Phillip J; Baune, Bernhard T

2014-05-01

This study aims to examine whether specific anxiety disorder comorbidity alters the purported association between depression and specific cardiovascular diseases (CVDs). In 4,181 representative German participants of the general population, 12-month prevalence of psychiatric disorders was assessed through the Composite International Diagnostic Interview and CVDs by physician verified diagnosis. Adjusting for conventional risk factors logistic regression analyzed the association between CVDs (peripheral vascular disease (PVD), hypertension, cerebrovascular disease and heart disease) and combinations of comorbidity between depression and anxiety disorder types (panic disorder, specific phobia, social phobia and generalized anxiety). There were 770 cases of hypertension (18.4 %), 763 cases of cerebrovascular disease (18.2 %), 748 cases of PVD (17.9 %), and 1,087 cases of CVD (26.0 %). In adjusted analyses phobia comorbid with depression was associated with cerebrovascular disease (odds ratio (OR) 1.61; 95 % confidence interval (CI) 1.04-2.50) as was panic disorder (OR 2.89; 95 % CI 1.47-5.69). PVD was significantly associated with panic disorder (adjusted OR 2.97; 95 % CI 1.55-5.69). Panic disorder was associated with CVDs (adjusted OR 2.28; 95 % CI 1.09-4.77) as was phobia (adjusted OR 1.35; 95 % CI 1.04-1.78). Classification of anxiety and depression according to comorbidity groups showed discrete effects for panic disorder and specific phobia with CVDs, independent from covariates and depression.

Release of cell-free ice nuclei from Halomonas elongata expressing the ice nucleation gene inaZ of Pseudomonas syringae.

PubMed

Tegos, G; Vargas, C; Perysinakis, A; Koukkou, A I; Christogianni, A; Nieto, J J; Ventosa, A; Drainas, C

2000-11-01

Release of ice nuclei in the growth medium of recombinant Halomonas elongata cells expressing the inaZ gene of Pseudomonas syringae was studied in an attempt to produce cell-free active ice nuclei for biotechnological applications. Cell-free ice nuclei were not retained by cellulose acetate filters of 0.2 microm pore size. Highest activity of cell-free ice nuclei was obtained when cells were grown in low salinity (0.5-5% NaCl, w/v). Freezing temperature threshold, estimated to be below -7 degrees C indicating class C nuclei, was not affected by medium salinity. Their density, as estimated by Percoll density centrifugation, was 1.018 +/- 0.002 gml(-1) and they were found to be free of lipids. Ice nuclei are released in the growth medium of recombinant H. elongata cells probably because of inefficient anchoring of the ice-nucleation protein aggregates in the outer membrane. The ice+ recombinant H. elongata cells could be useful for future use as a source of active cell-free ice nucleation protein.

Acceptance of vulvovaginal pain in women with provoked vestibulodynia and their partners: associations with pain, psychological, and sexual adjustment.

PubMed

Boerner, Katelynn E; Rosen, Natalie O

2015-06-01

Provoked vestibulodynia (PVD) is a common vulvovaginal pain condition associated with negative psychological and sexual consequences for affected women and their sexual partners. Greater pain acceptance has been found to be associated with better functional and psychological outcomes in individuals with chronic pain, and acceptance-based strategies are being increasingly incorporated into treatment protocols. The present study is a novel investigation of pain acceptance in PVD couples. The aim was to examine the associations between acceptance of vulvovaginal pain and women's pain during intercourse, as well as the psychological and sexual adjustment of both women with PVD and their partners. Sixty-one couples (M(age) for women = 27.95 years, SD = 5.87; M(age) for men = 30.48 years, SD = 6.70) in which the woman was diagnosed with PVD completed the Chronic Pain Acceptance Questionnaire, in reference to women's vulvovaginal pain. Women also rated their pain during intercourse, and couples completed measures of anxiety, depression, sexual function, and sexual satisfaction. Dependent measures were (i) women's self-reported pain during intercourse on a numerical rating scale; (ii) State-Trait Anxiety Inventory trait subscale; (iii) Beck Depression Inventory-II; (iv) Derogatis Interview for Sexual Functioning; and (v) Global Measure of Sexual Satisfaction Scale. Women's greater pain acceptance was associated with their lower self-reported pain during intercourse, controlling for partner's pain acceptance. Greater pain acceptance among women was associated with their own lower anxiety and depression, greater sexual functioning, as well as their own and their partner's greater sexual satisfaction, controlling for the partner's pain acceptance. Additionally, greater pain acceptance among male partners was associated with their own lower depression. Findings suggest that psychological interventions for PVD should target increasing couples' vulvovaginal pain acceptance in

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ioakeimidis, Apostolos; Christodoulou, Christos; Lux-Steiner, Martha

In this work we fabricate all-vacuum processed methyl ammonium lead halide perovskite by a sequence of physical vapour deposition of PbI{sub 2} and chemical vapour deposition (CVD) of CH{sub 3}NH{sub 3}I under a static atmosphere. We demonstrate that for higher deposition rate the (001) planes of PbI{sub 2} film show a higher degree of alignment parallel to the sample's surface. From X-ray diffraction data of the resulted perovskite film we derive that the intercalation rate of CH{sub 3}NH{sub 3}I is fostered for PbI{sub 2} films with higher degree of (001) planes alignment. The stoichiometry of the produced perovskite film ismore » also studied by Hard X-ray photoelectron spectroscopy measurements. Complete all-vacuum perovskite solar cells were fabricated on glass/ITO substrates coated by an ultra-thin (5 nm) Zn-phthalocyanine film as hole selective layer. A dependence of residual PbI{sub 2} on the solar cells performance is displayed, while photovoltaic devices with efficiency up to η=11.6% were achieved. - Graphical abstract: A two-step PVD/CVD processed perovskite film with the CVD intercalation rate of CH{sub 3}NCH{sub 3} molecules been fostered by increasing the PVD rate of PbI{sub 2} and prolonging the CVD time. - Highlights: • A simple PVD/CVD process for perovskite film production. • Increased PVD rate yields better alignment of the PbI{sub 2} (001) crystallite planes. • CH{sub 3}NH{sub 3}I intercalation process fostered by increased PbI{sub 2} PVD rate. • Stoichiometric CH{sub 3}NH{sub 3}PbI{sub 3} suitable as absorber in photovoltaic applications • Reduced PbI{sub 2} residue at the bottom of CH{sub 3}NH{sub 3}PbI{sub 3} improves device performance.« less

Electrodynamic pressure modulation of protein stability in cosolvents.

PubMed

Damodaran, Srinivasan

2013-11-19

Cosolvents affect structural stability of proteins in aqueous solutions. A clear understanding of the mechanism by which cosolvents impact protein stability is critical to understanding protein folding in a biological milieu. In this study, we investigated the Lifshitz-van der Waals dispersion interaction of seven different solutes with nine globular proteins and report that in an aqueous medium the structure-stabilizing solutes exert a positive electrodynamic pressure, whereas the structure-destabilizing solutes exert a negative electrodynamic pressure on the proteins. The net increase in the thermal denaturation temperature (ΔTd) of a protein in 1 M solution of various solutes was linearly related to the electrodynamic pressure (PvdW) between the solutes and the protein. The slope of the PvdW versus ΔTd plots was protein-dependent. However, we find a positive linear relationship (r(2) = 0.79) between the slope (i.e., d(ΔTd)/dPvdW) and the adiabatic compressibility (βs) of the proteins. Together, these results clearly indicate that the Lifshitz's dispersion forces are inextricably involved in solute-induced stabilization/destabilization of globular proteins. The positive and/or negative electrodynamic pressure generated by the solute-protein interaction across the water medium seems to be the fundamental mechanism by which solutes affect protein stability. This is at variance with the existing preferential hydration concept. The implication of these results is significant in the sense that, in addition to the hydrophobic effect that drives protein folding, the electrodynamic forces between the proteins and solutes in the biological milieu also might play a role in the folding process as well as in the stability of the folded state.

Processing of sputter targets using current activated pressure assisted densification

NASA Astrophysics Data System (ADS)

Chaney, Neil Russell

Thin Film deposition is a process that has been around since the beginning of the twentieth century and has become an integral part of the microfabrication and nanofabrication industries. Sputter deposition is a method of physical vapor deposition (PVD) in which a target is bombarded with ions and atoms are ejected and deposited as a thin film on a substrate. Despite extensive research on the direct process of sputtering thin films from targets to substrates, not much work has been done on studying the effect of processing on the microstructure of a target. In the first part of this work, the development of a PVD chamber is explored along with a few modifications and improvements developed along the way. A multiple process PVD chamber was equipped with three different types of PVD processes: sputtering, evaporation, and electron-beam deposition. In the second part of this work, the effect of processing of sputter targets on deposited films is explored. Multiple targets of Copper and yttria stabilized zirconia were produced using CAPAD. The effect of the processing on the microstructure of the targets was determined. The targets were then sputtered into films to study the effects of the target grain size on their properties. The effect of power and pressure were also measured. Increased power led to increased deposition rates while higher vacuum caused deposition rates to decrease.

Enhancing the oxidation resistance of graphite by applying an SiC coat with crack healing at an elevated temperature

NASA Astrophysics Data System (ADS)

Park, Jae-Won; Kim, Eung-Seon; Kim, Jae-Un; Kim, Yootaek; Windes, William E.

2016-08-01

The potential of reducing the oxidation of the supporting graphite components during normal and/or accident conditions in the Very High Temperature Reactor (VHTR) design has been studied. In this work efforts have been made to slow the oxidation process of the graphite with a thin SiC coating (∼ 10 μm). Upon heating at ≥ 1173 K in air, the spallations and cracks were formed in the dense columnar structured SiC coating layer grown on the graphite with a functionally gradient electron beam physical vapor deposition (EB-PVD. In accordance with the formations of these defects, the sample was vigorously oxidized, leaving only the SiC coating layer. Then, efforts were made to heal the surface defects using additional EB-PVD with ion beam bombardment and chemical vapor deposition (CVD). The EB-PVD did not effectively heal the cracks. But, the CVD was more appropriate for crack healing, likely due to its excellent crack line filling capability with a high density and high aspect ratio. It took ∼ 34 min for the 20% weight loss of the CVD crack healed sample in the oxidation test with annealing at 1173 K, while it took ∼ 8 min for the EB-PVD coated sample, which means it took ∼4 times longer at 1173 K for the same weight reduction in this experimental set-up.

Physical vapor deposition of one-dimensional nanoparticle arrays on graphite: seeding the electrodeposition of gold nanowires.

PubMed

Cross, C E; Hemminger, J C; Penner, R M

2007-09-25

One-dimensional (1D) ensembles of 2-15 nm diameter gold nanoparticles were prepared using physical vapor deposition (PVD) on highly oriented pyrolytic graphite (HOPG) basal plane surfaces. These 1D Au nanoparticle ensembles (NPEs) were prepared by depositing gold (0.2-0.6 nm/s) at an equivalent thickness of 3-4 nm onto HOPG surfaces at 670-690 K. Under these conditions, vapor-deposited gold nucleated selectively at the linear step edge defects present on these HOPG surfaces with virtually no nucleation of gold particles on terraces. The number density of 2-15 nm diameter gold particles at step edges was 30-40 microm-1. These 1D NPEs were up to a millimeter in length and organized into parallel arrays on the HOPG surface, following the organization of step edges. Surprisingly, the deposition of more gold by PVD did not lead to the formation of continuous gold nanowires at step edges under the range of sample temperature or deposition flux we have investigated. Instead, these 1D Au NPEs were used as nucleation templates for the preparation by electrodeposition of gold nanowires. The electrodeposition of gold occurred selectively on PVD gold nanoparticles over the potential range from 700-640 mV vs SCE, and after optimization of the electrodeposition parameters continuous gold nanowires as small as 80-90 nm in diameter and several micrometers in length were obtained.

Metal Organic Chemical Vapor Deposition of Oxide Films for Advanced Applications

DTIC Science & Technology

2000-06-01

coatings , photovoltaics, touch sensitive controls, electromagnetic shielding (as found on microwave ovens and stealth fighters), static dissipaters, and so...depositing high quality films. The methods are physical vapor deposition ( PVD ), spin/mist deposition, (CVD), and alternating layer (AL) CVD. PVD ...PZT & SBT, YBa2Cu3O, CeO, InO, TCOs, Varistors Ta2O5 , ZrO, MnO, HfO, CeO, MnO, MgO SAW/microwave Silicon/: Si, SiGe, SiGeC, �. Opto-electronics

Optical multilayers with an amorphous fluoropolymer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chow, R.; Loomis, G.E.; Lindsey, E.F.

1994-07-01

Multilayered coatings were made by physical vapor deposition (PVD) of a perfluorinated amorphous polymer, Teflon AF2400, together with other optical materials. A high reflector at 1064 run was made with ZnS and AF2400. An all-organic 1064-nm reflector was made from AF2400 and polyethylene. Oxide (HfO{sub 2}, SiO{sub 2}) compatibility was also tested. Each multilayer system adhered to itself. The multilayers were influenced by coating stress and unintentional temperature rises during PVD deposition.

Enhancing Insights into Pulmonary Vascular Disease through a Precision Medicine Approach. A Joint NHLBI-Cardiovascular Medical Research and Education Fund Workshop Report.

PubMed

Newman, John H; Rich, Stuart; Abman, Steven H; Alexander, John H; Barnard, John; Beck, Gerald J; Benza, Raymond L; Bull, Todd M; Chan, Stephen Y; Chun, Hyung J; Doogan, Declan; Dupuis, Jocelyn; Erzurum, Serpil C; Frantz, Robert P; Geraci, Mark; Gillies, Hunter; Gladwin, Mark; Gray, Michael P; Hemnes, Anna R; Herbst, Roy S; Hernandez, Adrian F; Hill, Nicholas S; Horn, Evelyn M; Hunter, Kendall; Jing, Zhi-Cheng; Johns, Roger; Kaul, Sanjay; Kawut, Steven M; Lahm, Tim; Leopold, Jane A; Lewis, Greg D; Mathai, Stephen C; McLaughlin, Vallerie V; Michelakis, Evangelos D; Nathan, Steven D; Nichols, William; Page, Grier; Rabinovitch, Marlene; Rich, Jonathan; Rischard, Franz; Rounds, Sharon; Shah, Sanjiv J; Tapson, Victor F; Lowy, Naomi; Stockbridge, Norman; Weinmann, Gail; Xiao, Lei

2017-06-15

The Division of Lung Diseases of the NHLBI and the Cardiovascular Medical Education and Research Fund held a workshop to discuss how to leverage the anticipated scientific output from the recently launched "Redefining Pulmonary Hypertension through Pulmonary Vascular Disease Phenomics" (PVDOMICS) program to develop newer approaches to pulmonary vascular disease. PVDOMICS is a collaborative, protocol-driven network to analyze all patient populations with pulmonary hypertension to define novel pulmonary vascular disease (PVD) phenotypes. Stakeholders, including basic, translational, and clinical investigators; clinicians; patient advocacy organizations; regulatory agencies; and pharmaceutical industry experts, joined to discuss the application of precision medicine to PVD clinical trials. Recommendations were generated for discussion of research priorities in line with NHLBI Strategic Vision Goals that include: (1) A national effort, involving all the stakeholders, should seek to coordinate biosamples and biodata from all funded programs to a web-based repository so that information can be shared and correlated with other research projects. Example programs sponsored by NHLBI include PVDOMICS, Pulmonary Hypertension Breakthrough Initiative, the National Biological Sample and Data Repository for PAH, and the National Precision Medicine Initiative. (2) A task force to develop a master clinical trials protocol for PVD to apply precision medicine principles to future clinical trials. Specific features include: (a) adoption of smaller clinical trials that incorporate biomarker-guided enrichment strategies, using adaptive and innovative statistical designs; and (b) development of newer endpoints that reflect well-defined and clinically meaningful changes. (3) Development of updated and systematic variables in imaging, hemodynamic, cellular, genomic, and metabolic tests that will help precisely identify individual and shared features of PVD and serve as the basis of novel

Process-structure-property relationships of micron thick gadolinium oxide films deposited by reactive electron beam-physical vapor deposition (EB-PVD)

NASA Astrophysics Data System (ADS)

Grave, Daniel A.

keeping a large adatom diffusion length on the film surface. Crystallographic texture evolution in the Gd2O3 films was investigated for different substrate types. At high rates, it was shown that films deposited on different substrates (quartz, silicon, sapphire, and GaN) all had similar theta-2theta diffraction patterns, suggesting that films grew similarly on different substrates due to the low adatom mobility. However, significant differences in texture were observed for films deposited at low rates (< 1 A/s) and high temperature (650°C) on different substrates. For evaluation of in-plane texture in the Gd2O 3 films, pole figure analysis was performed. Mixed phase films deposited at high rates and low temperature showed weak out-of-plane texture and random in-plane texture. Mixed phase films deposited at high temperatures possessed a fiber texture (strong out-of-plane texture), but lacked the necessary adatom mobility to develop in-plane texture. For single phase cubic films grown under low rates of deposition, out-of-plane texture was observed on quartz substrates. However, weak and strong in-plane textures were observed for sapphire and GaN substrates, respectively. The use of ion bombardment resulted in the formation of moderate biaxial texture for films grown on quartz. For films grown on sapphire, a very strong biaxial texture was achieved with ion bombardment which adds additional energy to the system. The effects of processing on the structure, composition, and interfacial chemistry of the Gd2O3 films were investigated. The results showed that films primarily adhered to the Structure-Zone models with a few exceptions. The deviation from the Structure-Zone model was explained by the combined effects of columnar growth, shadowing, and adatom mobility. At low deposition temperatures, decreasing oxygen flow resulted in increased film density due to higher adatom mobility. Films deposited at this temperature were characterized by small (10-15 nm) nanocrystalline

Instantaneous formation of SiOx nanocomposite for high capacity lithium ion batteries by enhanced disproportionation reaction during plasma spray physical vapor deposition.

PubMed

Tashiro, Tohru; Dougakiuchi, Masashi; Kambara, Makoto

2016-01-01

Nanocomposite SiO x particles have been produced by a single step plasma spray physical vapor deposition (PS-PVD) through rapid condensation of SiO vapors and the subsequent disproportionation reaction. Core-shell nanoparticles, in which 15 nm crystalline Si is embedded within the amorphous SiO x matrix, form under typical PS-PVD conditions, while 10 nm amorphous particles are formed when processed with an increased degree of non-equilibrium effect. Addition of CH 4 promotes reduction in the oxygen content x of SiO x , and thereby increases the Si volume in a nanocomposite particle. As a result, core-shell nanoparticles with x  = 0.46 as anode exhibit increased initial efficiency and the capacity of lithium ion batteries while maintaining cyclability. Furthermore, it is revealed that the disproportionation reaction of SiO is promoted in nanosized particles attaining increased Si diffusivity by two orders of magnitude compared to that in bulk, which facilitates instantaneous composite nanoparticle formation during PS-PVD.

Instantaneous formation of SiOx nanocomposite for high capacity lithium ion batteries by enhanced disproportionation reaction during plasma spray physical vapor deposition

PubMed Central

Tashiro, Tohru; Dougakiuchi, Masashi; Kambara, Makoto

2016-01-01

Abstract Nanocomposite SiOx particles have been produced by a single step plasma spray physical vapor deposition (PS-PVD) through rapid condensation of SiO vapors and the subsequent disproportionation reaction. Core-shell nanoparticles, in which 15 nm crystalline Si is embedded within the amorphous SiOx matrix, form under typical PS-PVD conditions, while 10 nm amorphous particles are formed when processed with an increased degree of non-equilibrium effect. Addition of CH4 promotes reduction in the oxygen content x of SiOx, and thereby increases the Si volume in a nanocomposite particle. As a result, core-shell nanoparticles with x = 0.46 as anode exhibit increased initial efficiency and the capacity of lithium ion batteries while maintaining cyclability. Furthermore, it is revealed that the disproportionation reaction of SiO is promoted in nanosized particles attaining increased Si diffusivity by two orders of magnitude compared to that in bulk, which facilitates instantaneous composite nanoparticle formation during PS-PVD. PMID:27933114

Pd-Ni-MWCNT nanocomposite thin films: preparation and structure

NASA Astrophysics Data System (ADS)

Kozłowski, Mirosław; Czerwosz, ElŻbieta; Sobczak, Kamil

2017-08-01

The properties of nanocomposite palladium-nickel-multi-walled (Pd-Ni-MWCNT) films deposited on aluminum oxide (Al2O3) substrate have been prepared and investigated. These films were obtained by 3 step process consisted of PVD/CVD/PVD methods. The morphology and structure of the obtained films were characterized by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) techniques at various stages of the film formation. EDX spectrometer was used to measurements of elements segregation in the obtained film. TEM and STEM (Scanning Transmission Electron Microscopy) observations showed MWCNTs decorated with palladium nanoparticles in the film obtained in the last step of film formation (final PVD process). The average size of the palladium nanoparticles observed both on MWCNTs and carbonaceous matrix does not exceed 5 nm. The research was conducted on the use of the obtained films as potential sensors of gases (e.g. H2, NH3, CO2) and bio-sensors or optical sensors.

Surgical management in patients with coexistent coronary and cerebrovascular disease. Long-term results.

PubMed

Kaul, T K; Fields, B L; Wyatt, D A; Jones, C R; Kahn, D R

1994-11-01

Between January 1980 and December 1992, 3% (210/6,862) of our patients undergoing myocardial revascularization (CABG) had high grade (> 80%) internal carotid stenosis (CS). One hundred seventy-five of these patients with complete follow up for a minimum of 18 months were studied. Bilateral internal CS was present in 60%, and 75% had other vascular lesions, mainly as peripheral vascular disease (PVD) of the lower limb (50.8%). All patients underwent CAE (carotid endarterectomy) followed by CABG under the same anesthesia. Peripheral vascular lesions, contralateral internal CS and recurrent (n = 43) and progressive vascular lesions (n = 50), were subsequently treated as staged procedures. Hospital mortality was 3.42%. By univariate analysis significant predictors of late mortality were congestive heart failure, COPD, PVD, postoperative myocardial infarction, postoperative stroke, and ischemic cardiomyopathy. Only the latter two were also significant by multivariate analysis. At 12 years, actuarial survival in the presence of these risk factors were 46%, 49%, 22%, 37%, 53%, and 27% respectively. All are significantly lower as compared with the corresponding subsets of patients with the risk factor absent. At 12 years, actuarial survival for the entire series was 65%. Cumulative incidence of postoperative strokes was higher in patients with bilateral internal CS than in patients with unilateral internal CS (p < 0.07) and in patients with neurologic symptoms than asymptomatic patients. At 12 years, actuarial freedom from all cardiac related events, postoperative stroke, and symptomatic PVD were 49%, 82%, and 76% respectively. After successful revascularization these patients should be carefully followed for recurrent and progressive vascular lesions.

The Influence of Temperature on the Frictional Behavior of Duplex-Coated Die Steel Rubbing Against Forging Brass

NASA Astrophysics Data System (ADS)

Ebrahimzadeh, I.; Ashrafizadeh, F.

2015-01-01

Improvement of die life under hot forging of brass alloys is considered vital from both economical and technical points of view. One of the best methods for improving die life is duplex coatings. In this research, the influence of temperature on the tribological behavior of duplex-coated die steel rubbing against forging brass was investigated. The wear tests were performed on a pin-on-disk machine from room temperature to 700 °C; the pins were made in H13 hot work tool steel treated by plasma nitriding and by PVD coatings of TiN-TiAlN-CrAlN. The disks were machined from a two-phase brass alloy too. The results revealed that the friction coefficient of this tribosystem went through a maximum at 550 °C and decreased largely at 700 °C. Furthermore, the formation of Cr2O3 caused the reduction of friction coefficient at 700 °C. PVD coatings proved their wear resistance up to 550 °C, well above the working temperature of the brass forging dies.

Talking About Sex When Sex Is Painful: Dyadic Sexual Communication Is Associated With Women's Pain, and Couples' Sexual and Psychological Outcomes in Provoked Vestibulodynia.

PubMed

Rancourt, Kate M; Rosen, Natalie O; Bergeron, Sophie; Nealis, Logan J

2016-11-01

Provoked vestibulodynia (PVD) is a recurrent vulvovaginal pain condition associated with psychological and sexual consequences for affected women and their partners, including lower quality of dyadic sexual communication compared to pain-free couples. Although greater sexual communication is associated with positive sexual and relational outcomes for both pain-free couples and couples experiencing painful sex, little is known about its role in women's pain and psychological outcomes, especially in a relational context. The present study examined associations between dyadic sexual communication and pain, sexual satisfaction, sexual functioning, and depressive symptoms in a sample of 107 couples in which the woman was diagnosed with PVD via a standardized gynecological assessment. Women completed a measure of pain intensity, and both members of the couple completed measures of their dyadic sexual communication, sexual satisfaction, sexual functioning, and depressive symptoms. Analyses were guided by the actor-partner interdependence model. Women and partners' own perceptions of greater dyadic sexual communication were associated with their own greater sexual satisfaction and sexual functioning, and lower depressive symptoms. Partners' perceptions of greater dyadic sexual communication were also associated with women's lower pain and greater sexual satisfaction. Results point to the importance of dyadic coping conceptualizations for both individual and interpersonal outcomes in PVD. Dyadic sexual communication may be a key treatment target for interventions aimed at improving the pain and psychological and sexual impairments of women with PVD and their partners.

Attachment, Sexual Assertiveness, and Sexual Outcomes in Women with Provoked Vestibulodynia and Their Partners: A Mediation Model.

PubMed

Leclerc, Bianca; Bergeron, Sophie; Brassard, Audrey; Bélanger, Claude; Steben, Marc; Lambert, Bernard

2015-08-01

Provoked vestibulodynia (PVD) is a prevalent women's sexual pain disorder, which is associated with sexual function difficulties. Attachment theory has been used to understand adult sexual outcomes, providing a useful framework for examining sexual adaptation in couples confronted with PVD. Research to date indicates that anxious and avoidant attachment dimensions correlate with worse sexual outcomes in community and clinical samples. The present study examined the association between attachment, pain, sexual function, and sexual satisfaction in a sample of 101 couples in which the women presented with PVD. The actor-partner interdependence model was used in order to investigate both actor and partner effects. This study also examined the role of sexual assertiveness as a mediator of these associations via structural equation modeling. Women completed measures of pain intensity and both members of the couple completed measures of romantic attachment, sexual assertiveness, sexual function, and satisfaction. Results indicated that attachment dimensions did not predict pain intensity. Both anxious and avoidant attachment were associated with lower sexual satisfaction. Only attachment avoidance predicted lower sexual function in women. Partner effects indicated that higher sexual assertiveness in women predicted higher sexual satisfaction in men. Finally, women's sexual assertiveness was found to be a significant mediator of the relationship between their attachment dimensions, sexual function, and satisfaction. Findings highlight the importance of examining how anxious and avoidant attachment may lead to difficulties in sexual assertiveness and to less satisfying sexual interactions in couples where women suffer from PVD.

A new diffusion-inhibited oxidation-resistant coating for superalloys

NASA Technical Reports Server (NTRS)

Gedwill, M. A.; Glasgow, T. K.; Levine, S. R.

1981-01-01

A concept for enhanced protection of superalloys consists of adding an oxidation- and diffusion-resistant cermet layer between the superalloy and the outer oxidation-resistant metallic alloy coating. Such a duplex coating was compared with a physical-vapor-deposited (PVD) NiCrAlY coating in cyclic oxidation at 1150 C. The substrate alloy was MA 754 - an oxide-dispersion-strengthened superalloy that is difficult to coat. The duplex coating, applied by plasma spraying, outperformed the PVD coating on the basis of weight change and both macroscopic and metallographic observations.

Small-Gauge Pars Plana Vitrectomy for the Management of Symptomatic Posterior Vitreous Detachment after Phacoemulsification and Multifocal Intraocular Lens Implantation: A Pilot Study from the Pan-American Collaborative Retina Study Group

PubMed Central

Navarro, Rodrigo M.; Machado, Leonardo M.; Maia, Ossires; Wu, Lihteh; Farah, Michel E.; Magalhaes, Octaviano; Arevalo, J. Fernando; Maia, Mauricio

2015-01-01

Purpose. To determine the efficacy of 23-gauge pars plana vitrectomy (PPV) for symptomatic posterior vitreous detachment (PVD) on visual acuity (VA) and quality after multifocal intraocular lenses (IOLs). Methods. In this prospective case series, patients who developed symptomatic PVD and were not satisfied with visual quality due to floaters and halos after multifocal IOL implantation underwent PPV. Examinations included LogMAR uncorrected visual acuity (UCVA), intraocular pressure, biomicroscopy, and indirect ophthalmoscopy at baseline and 1, 7, 30, and 180 days postoperatively. Ultrasonography and aberrometry were performed. The Visual Functioning Questionnaire 25 (VFQ-25) was administered preoperatively and at 30 days postoperatively. Both the postoperative UCVA and questionnaire results were compared to preoperative findings using the Wilcoxon test. Results. Sixteen eyes of 8 patients were included. VA significantly improved from 0.17 to 0.09 postoperatively (P = 0.017). All patients reported improvement of halos, glare, and floaters. VFQ-25 scores significantly improved in general vision (P = 0.023), near activities (P = 0.043), distance activities (P = 0.041), mental health (P = 0.011), role difficulties (P = 0.042), and driving (P = 0.016). Conclusion. PPV may increase UCVA and quality of vision in patients with bilateral multifocal IOLs and symptomatic PVD. Larger studies are advised. PMID:26504590

Preoperative care of Polypoid exposed mucosal template in bladder exstrophy: the role of high-barrier plastic wraps in reducing inflammation and polyp size.

PubMed

Sabetkish, Nastaran; Sabetkish, Shabnam; Kajbafzadeh, Abdol-Mohammad

2018-01-26

To assess the role of high-barrier plastic wrap in reducing the number and size of polyps, as well as decreasing the inflammation and allergic reactions in exstrophy cases, and to compare the results with the application of low-barrier wrap. Eight patients with bladder exstrophy-epispadias complex (BEEC) that had used a low density polyethylene (LDPE) wrap for coverage of the exposed polypoid bladder in preoperative care management were referred. The main complaint of their parents was increase in size and number of polyps. After a period of 2 months using the same wrap and observing the increasing pattern in size of polyps, these patients were recommended to use a high-barrier wrap which is made of polyvinylidene chloride (PVdC), until closure. Patients were monitored for the number and size of polyps before and after the change of barriers. The incidence of para-exstrophy skin infection/inflammation and skin allergy were assessed. Biopsies were taken from the polyps to identify histopathological characteristics of the exposed polyps. The high barrier wrap was applied for a mean ± SD duration of 12±2.1 months. Polyps' size and number decreased after 12 months. No allergic reaction was detected in patients after the usage of PVdC; three patients suffered from low-grade skin allergy when LDPE was applied. Also, pre-malignant changes were observed in none of the patients in histopathological examination after the application of PVdC. Polyps' size and number and skin allergy may significantly decrease with the use of a high-barrier wrap. Certain PVdC wraps with more integrity and less evaporative permeability may be more "exstrophy-friendly". Copyright® by the International Brazilian Journal of Urology.

The ACTIV study: acupuncture treatment in provoked vestibulodynia.

PubMed

Curran, Stephanie; Brotto, Lori A; Fisher, Harris; Knudson, Gail; Cohen, Trevor

2010-02-01

Provoked vestibulodynia (PVD) is a distressing genital pain condition affecting 12% of women. Treatment modalities vary and although vestibulectomy has the highest efficacy rates, it is usually not a first-line option. Acupuncture has a long history in the traditional Chinese medicine (TCM) system and operates on the premise that pain results from the blockage or imbalance of important channels. The main principle of treatment is to move Qi and blood to cease genital pain. To explore effect sizes and feasibility in a pilot study of acupuncture for women with PVD. Eight women with PVD (mean age 30 years) underwent 10 1-hour acupuncture sessions. Specific placement of the needles depended on the woman's individual TCM diagnosis. TCM practitioners made qualitative notes on participants' feedback after each session. Main Outcome Measures. Self-reported pain (investigator-developed), pain-associated cognitions (Pain Catastrophizing Scale [PCS], Pain Vigilance and Awareness Questionnaire), and sexual response (Female Sexual Function Index) were measured before and after treatment sessions 5 and 10. Qualitative analyses of TCM practitioner notes were performed along with one in-depth case report on the experience of a participant. A repeated measures analysis of variance revealed significant decreases in pain with manual genital stimulation and helplessness on the PCS. An examination of effect sizes also revealed strong (though nonsignificant) effects for improved ability to have intercourse and sexual desire. Qualitative analyses were overall more positive and revealed an improvement in perceived sexual health, reduced pain, and improved mental well-being in the majority of participants. Effect sizes and qualitative analyses of practitioner-initiated interviews showed overall positive effects of acupuncture, but there were statistically significant improvements only in pain with manual genital stimulation and helplessness. These findings require replication in a larger

Fabricating and strengthening the carbon nanotube/copper composite fibers with high strength and high electrical conductivity

NASA Astrophysics Data System (ADS)

Han, Baoshuai; Guo, Enyu; Xue, Xiang; Zhao, Zhiyong; Li, Tiejun; Xu, Yanjin; Luo, Liangshun; Hou, Hongliang

2018-05-01

Combining the excellent properties of carbon nanotube (CNT) and copper, CNT/Cu composite fibers were fabricated by physical vapor deposition (PVD) and rolling treatment. Dense and continuous copper film (∼2 μm) was coated on the surface of the CNT fibers by PVD, and rolling treatment was adopt to strengthen the CNT/Cu composite fibers. After the rolling treatment, the defects between the Cu grains and the CNT bundles were eliminated, and the structure of both the copper film and the core CNT fibers were optimized. The rolled CNT/Cu composite fibers possess high tensile effective strength (1.01 ± 0.13 GPa) and high electrical conductivity ((2.6 ± 0.3) × 107 S/m), and thus, this material may become a promising wire material.

The Characteristics of an Antibacterial TiAgN Thin Film Coated by Physical Vapor Deposition Technique.

PubMed

Kang, Byeong-Mo; Jeong, Woon-Jo; Park, Gye-Choon; Yoon, Dong-Joo; Ahn, Ho-Geun; Lim, Yeong-Seog

2015-08-01

In this work, we found the characteristics of an antibacterial TiAgN thin film coated on the pure titanium specimen via the physical vapor deposition process (PVD). TiAgN thin films were coated using TiAg alloy targets by arc ion plating method. Changing the process parameters, the surface analysis of TiAgN thin film was observed by FE-SEM and the force of adhesion was measured with Scratch Tester. The proliferation of human gingival fibroblast (HGF) cells was examined by XTT test assay and the antibacterial properties were investigated by culturing Streptococus Mutans (KCTC 3065) using paper disk techniques. At the result of experiment, cytotoxic effects were not found and the antibacterial effects against Streptococus Mutans were appeared over 5 wt% TiAgN specimens.

Gender Linked Metric Analysis of Portal Vein: A Sonographic Appraisal.

PubMed

Singh, Shikha; Pankaj, Arvind Kumar; Rani, Anita; Sharma, Pradeep Kumar; Chauhan, Puja

2017-03-01

Portal hypertension is one of the most mystifying and disconcerting abdominal ailment. Ultrasonography (USG) is an effective diagnostic tool for its prompt management. Knowledge of normal calibre of portal vein in a local setting is essential as literature reports contrasting values in different regions. It helps in early diagnosis of portal hypertension even before it is clinically manifested thereby assisting clinicians and interventional radiologists in pertinent management. Study was aimed to evaluate the Portal Vein Diameter (PVD) and find its correlation with gender by using USG in North Indian population. A total of 300 healthy adults were included in the study. Portal vein diameter was measured in supine position and normal respiration by grey scale USG. The portal vein diameter was correlated with age and gender statistically using independent Student's t-test and ANOVA. Mean PVD of (9.49±1.03 mm) was observed in the present cross-sectional study. Male showed a significantly higher mean PVD (9.70±1.02 mm) as compared to females (9.10±0.94 mm). Scarcity of information concerning ultrasonographically measured standard portal vein diameter and inconstant values reported in literature necessitates the need for establishing local standard value. In the given subset of population the portal vein diameter was influenced by the gender. The information will be helpful in prompt diagnosis and management of portal hypertension.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jayaraman, R.; Vickraman, P., E-mail: vrsvickraman@yahoo.com; Subramanian, N. M. V.

Impedance, XRD, DSC and FTIR studies had been carried out for PVdF-co-HFP/LIBETI based system for three plasticizer (EC/DMC) – filler (PbTiO3) weight ratios. The enhanced conductivity 4.18 × 10{sup −5} Scm{sup −1} was noted for 57.5 wt% −7.5 wt% plasticizer – filler. while blending PEMA to PVdF-co-HFP respectively 7.5: 22.5 wt % (3/7), 15 wt%: 15 wt % (5/5) and 22.5wt %: 7.5 wt % (7/3), the improved conductivity was noted for 3/7 ratio 1.22 × 10{sup −5} S cm{sup −1} and its temperature dependence abide Arrhenius behavior. The intensity of peaks in XRD diffractogram registered dominance of lead titanate,more » from 2θ = 10° to 80° and absence of VdF crystallites (α+β phase) was noted. In DSC studies, the presence of the exotherm events, filler effect was distinctively seen exhibiting recrystallization of VdF crystallites. In blending PEMA, however, no trace of exotherms was found suggestive of PEMA better inhibiting recrystallization. FTIR study confirmed molecular interactions of various constituents in the vibrational band 500 – 1000 cm{sup −1} both in pristine PVdF-co-HFP and PEMA blended composites with reference to C-F stretching, C-H stretching and C=O carbonyl bands.« less

Summing Certain p-Series.

ERIC Educational Resources Information Center

Fay, Temple H.

1997-01-01

Presents an exercise suitable for beginning calculus students that may give insight into series representations and allow students to see some elementary application of these representations. The Fourier series is used to approximate by taking sums of trigonometric functions of the form sin(ns) and cos(nx) for n is greater than or = zero. (PVD)

Max Phase Materials And Coatings For High Temperature Heat Transfer Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martinez-Rodriguez, M.; Garcia-Diaz, B.; Olson, L.

2015-10-19

Molten salts have been used as heat transfer fluids in a variety of applications within proposed Gen IV nuclear designs and in advanced power system such as Concentrating Solar Power (CSP). However, operating at elevated temperatures can cause corrosion in many materials. This work developed coating technologies for MAX phase materials on Haynes-230 and characterized the corrosion of the coatings in the presence of commercial MgCl 2-KCl molten salt. Cold spraying of Ti 2AlC and physical vapor deposition (PVD) of Ti 2AlC or Zr 2AlC were tested to determine the most effective form of coating MAX phases on structural substrates.more » Corrosion testing at 850°C for 100 hrs showed that 3.9 μm Ti2AlC by PVD was slightly protective while 117 μm Ti 2AlC by cold spray and 3.6 μm Zr 2AlC by PVD were completely protective. None of the tests showed decomposition of the coating (Ti or Zr) into the salt« less

Friction and fretting wear characteristics of different diamond-like carbon coatings against alumina in water-lubricated fretting conditions.

PubMed

Watabe, Tsukasa; Amanov, Auezhan; Tsuboi, Ryo; Sasaki, Shinya

2013-12-01

Diamond-like carbon (DLC) coatings typically show low friction and high wear resistance. In this study, the friction and fretting wear characteristics of PVD, CVD and CVD-Si DLC coatings were investigated against an alumina (Al2O3) ball under water-lubricated fretting conditions. The objective of this study is to investigate and compare the friction and fretting wear characteristics of those DLC coatings at various fretting frequencies. The test results showed that the PVD DLC coating led to a lower friction coefficient and a higher resistance to fretting wear compared to those of the CVD and CVD-Si DLC coatings. However, the CVD DLC coating showed that the fretting wear resistance decreases with increasing frequency, while no significant difference in fretting wear resistances of the PVD and CVD-Si DLC coatings was observed. Quantitative surface analyses of the specimens were performed using an energy dispersive spectroscopy (EDS), a laser scanning microscope (LSM), a scanning electron microscope (SEM), an atomic force microscope (AFM) and the Raman spectroscopy.

Thermal stability and chemical resistance of (Ti,Al)N-Cu and (Ti,Al)N-Ni metal-ceramic nanostructured coatings

NASA Astrophysics Data System (ADS)

Belov, D. S.; Blinkov, I. V.; Volkhonskii, A. O.; Kuznetsov, D. V.; Kiryukhantsev-Korneev, F. V.; Pustov, Yu. A.; Sergevnin, V. S.

2016-12-01

This work represents the results of research on thermal stability, oxidation resistance at temperatures of up to 800 °C and electrochemical behaviour of (Ti,Al)N-(∼3 at.%)Cu and (Ti,Al)N-(∼8 at.%)Ni nanocrystalline coatings in acidic and alkaline media. The coatings were deposited by the arc-PVD method with a thickness of approximately 4 μm and crystallite size of less than 20 nm. It has been demonstrated that the composition and properties of the coating structures do not change when the coatings are heated in 10-4 Pa vacuum at temperatures of 600, 700 °C for 1.5 h. Heating up to 800 °C caused an increase of crystallite size and reduction microstrain in the crystal lattice of the ceramic phase. The process is accompanied by deterioration of the coating hardness from 48 to 52 to 33-36 GPa. The (Ti,Al)N-Cu and (Ti,Al)N-Ni metal-ceramic nanostructured coatings are characterized by heat resistance up to the temperatures of 700 and 800 °C respectively. The coatings under study have tendency for self-passivation and resistance to pitting corrosion.

Development of nanostructured PVD coatings for total knee replacement joints using HIPIMS

NASA Astrophysics Data System (ADS)

Sugumaran, Arunprabhu A.

The aim of this study was to develop thin film coatings for total knee replacement joints using high power impulse magnetron sputtering (HIPIMS). An industrial size four cathode magnetron sputtering system equipped with direct current (DC) and HIPIMS power supplies was used for this purpose. Initially, Plasma diagnostics were carried out using optical emission spectroscopy (OES) while sputtering Ti target in Ar + N2 atmosphere by utilizing various HIP IMS/conventional DCMS (henceforth UBM) source combinations by varying the process parameters such as coil current and N2 flow. Then, single layer titanium nitride (TiN) coating was deposited by varying the degree of HIPIMS utilisation and the process parameters such as bias voltage and coil current to thoroughly understand the effect of degree of HIPIMS utilisation on the microstructure, residual stress, texture, mechanical, tribological and corrosion properties of such coatings. The degree of HIPIMS utilisation was altered by increasing the number of HIPIMS targets used for the deposition. Four different source combinations were used for this purpose, as follows: 4 cathodes in conventional DCMS mode to deposit pure UBM coating, 1 HIPIMS + 3UBM and 2HIPIMS + 2UBM cathodes to deposit combined HIPIMS/UBM coatings and 2HIPIMS cathodes to deposit pure HIPIMS coatings. TiN/NbN, TiCN/NbCN and CrN/NbN multilayer coatings were deposited on CoCr alloy test buttons along with other (HSS, SS and Si) substrates since our intended application is on total knee replacement joints made of CoCr alloy. The knowledge gained by investigating the TiN (Ar + N[2]) plasma and the properties of TiN was used to determine the process parameters for depositing the multilayer coatings. X- ray diffraction (XRD) technique was used for calculating the texture, residual stress and bilayer thickness of the coatings. Nanoindentation method was used to determine the nano hardness of the coatings. The adhesion strength of the coatings was estimated by

Structural, mechanical and tribocorrosion behaviour in artificial seawater of CrN/AlN nano-multilayer coatings on F690 steel substrates

NASA Astrophysics Data System (ADS)

Ma, Fuliang; Li, Jinlong; Zeng, Zhixiang; Gao, Yimin

2018-01-01

The CrN monolayer and CrN/AlN nano-multilayer coating were successfully fabricated by reactive magnetron sputtering on F690 steel. The results show that CrN monolayer exhibits a face centered cubic crystalline structure with (111) preferred orientation and CrN/AlN nano-multilayer coating has a (200) preferred orientation. This design of the nano-multilayer can interrupt the continuous growth of columnar crystals making the coating denser. The CrN/AlN nano-multilayer coating has a better wear resistance and corrosion resistance compared with the CrN monolayer coating. The tribocorrosion tests reveal that the evolution of potential and current density of F690 steel and CrN monolayer or CrN/AlN nano-multilayer coating see an opposite trend under the simultaneous action of wear and corrosion, which is attributed to that F690 steel is a non-passive material and PVD coatings is a passive material. The nano-multilayer structure has a good ;Pore Sealing Effect;, and the corrosive solution is difficult to pass through the coating to corrode the substrate.

Harmful or helpful: perceived solicitous and facilitative partner responses are differentially associated with pain and sexual satisfaction in women with provoked vestibulodynia.

PubMed

Rosen, Natalie O; Bergeron, Sophie; Glowacka, Maria; Delisle, Isabelle; Baxter, Mary Lou

2012-09-01

Provoked vestibulodynia (PVD) is a highly prevalent vulvovaginal pain condition that negatively affects women's emotional, sexual, and relationship well-being. Recent studies have investigated the role of interpersonal variables, including partner responses. We examined whether solicitous and facilitative partner responses were differentially associated with vulvovaginal pain and sexual satisfaction in women with PVD by examining each predictor while controlling for the other. One hundred twenty-one women (M age = 30.60, SD = 10.53) with PVD or self-reported symptoms of PVD completed the solicitous subscale of the spouse response scale of the Multidimensional Pain Inventory, and the facilitative subscale of the Spouse Response Inventory. Participants also completed measures of pain, sexual function, sexual satisfaction, trait anxiety, and avoidance of pain and sexual behaviors (referred to as "avoidance"). Dependent measures were the (i) Pain Rating Index of the McGill Pain Questionnaire with reference to pain during vaginal intercourse and (ii) Global Measure of Sexual Satisfaction Scale. Controlling for trait anxiety and avoidance, higher solicitous partner responses were associated with higher vulvovaginal pain intensity (β = 0.20, P = 0.03), and higher facilitative partner responses were associated with lower pain intensity (β = -0.20, P = 0.04). Controlling for sexual function, trait anxiety, and avoidance, higher facilitative partner responses were associated with higher sexual satisfaction (β = 0.15, P = 0.05). Findings suggest that facilitative partner responses may aid in alleviating vulvovaginal pain and improving sexual satisfaction, whereas solicitous partner responses may contribute to greater pain. © 2012 International Society for Sexual Medicine.

Nonflammable gel electrolyte containing alkyl phosphate for rechargeable lithium batteries

NASA Astrophysics Data System (ADS)

Yoshimoto, Nobuko; Niida, Yoshihiro; Egashira, Minato; Morita, Masayuki

A nonflammable polymeric gel electrolyte has been developed for rechargeable lithium battery systems. The gel film consists of poly(vinylidenefluoride- co-hexafluoropropylene) (PVdF-HFP) swollen with lithium hexafluorophosphate (LiPF 6) solution in ternary solvent containing trimethyl phosphate (TMP). High ionic conductivity of 6.2 mS cm -1 at 20 °C was obtained for the gel electrolyte consisting of 0.8 M LiPF 6/EC + DEC + TMP (55:25:20) with PVdF-HFP, which is comparable to that of the liquid electrolyte containing the same electrolytic salt. Addition of a small amount of vinylene carbonate (VC) in the gel electrolyte improved the rechargeability of a graphite electrode. The rechargeable capacity of the graphite in the gel containing VC was ca. 300 mAh g -1, which is almost the same as that in a conventional liquid electrolyte system.

Controllable fabrication of copper phthalocyanine nanostructure crystals.

PubMed

Liu, Fangmei; Sun, Jia; Xiao, Si; Huang, Wenglong; Tao, Shaohua; Zhang, Yi; Gao, Yongli; Yang, Junliang

2015-06-05

Copper phthalocyanine (CuPc) nanostructure crystals, including nanoflower, nanoribbon, and nanowire, were controllably fabricated by temperature gradient physical vapor deposition (TG-PVD) through controlling the growth parameters. In a controllable growth system with carrier gas N2, nanoflower, nanoribbon, and nanowire crystals were formed in a high-temperature zone, medium-temperature zone, and low-temperature zone, respectively. They were proved to be β-phase, coexist of α-phase and β-phase, and α-phase respectively based on x-ray diffraction results. Furthermore, ultralong CuPc nanowires up to several millimeters could be fabricated by TG-PVD without carrier gas, and they were well-aligned to form large-area CuPc nanowire crystal arrays by the Langmuir-Blodgett method. The nanostructure crystals showed unusual optical absorption spectra from the ultraviolet-visible to near-infrared range, which was explained by the diffraction and scattering caused by the wavelength-sized nanostructures. These CuPc nanostructure crystals show potential applications in organic electronic and optoelectronic devices.

Quantitative contrast enhanced magnetic resonance imaging for the evaluation of peripheral arterial disease: a comparative study versus standard digital angiography.

PubMed

Pavlovic, Chris; Futamatsu, Hideki; Angiolillo, Dominick J; Guzman, Luis A; Wilke, Norbert; Siragusa, Daniel; Wludyka, Peter; Percy, Robert; Northrup, Martin; Bass, Theodore A; Costa, Marco A

2007-04-01

The purpose of this study is to evaluate the accuracy of semiautomated analysis of contrast enhanced magnetic resonance angiography (MRA) in patients who have undergone standard angiographic evaluation for peripheral vascular disease (PVD). Magnetic resonance angiography is an important tool for evaluating PVD. Although this technique is both safe and noninvasive, the accuracy and reproducibility of quantitative measurements of disease severity using MRA in the clinical setting have not been fully investigated. 43 lesions in 13 patients who underwent both MRA and digital subtraction angiography (DSA) of iliac and common femoral arteries within 6 months were analyzed using quantitative magnetic resonance angiography (QMRA) and quantitative vascular analysis (QVA). Analysis was repeated by a second operator and by the same operator in approximately 1 month time. QMRA underestimated percent diameter stenosis (%DS) compared to measurements made with QVA by 2.47%. Limits of agreement between the two methods were +/- 9.14%. Interobserver variability in measurements of %DS were +/- 12.58% for QMRA and +/- 10.04% for QVA. Intraobserver variability of %DS for QMRA was +/- 4.6% and for QVA was +/- 8.46%. QMRA displays a high level of agreement to QVA when used to determine stenosis severity in iliac and common femoral arteries. Similar levels of interobserver and intraobserver variability are present with each method. Overall, QMRA represents a useful method to quantify severity of PVD.

Gallium incorporation into phosphate based glasses: Bulk and thin film properties.

PubMed

Stuart, Bryan W; Grant, Colin A; Stan, George E; Popa, Adrian C; Titman, Jeremy J; Grant, David M

2018-06-01

The osteogenic ions Ca 2+ , P 5+ , Mg 2+ , and antimicrobial ion Ga 3+ were homogenously dispersed into a 1.45 µm thick phosphate glass coating by plasma assisted sputtering onto commercially pure grade titanium. The objective was to deliver therapeutic ions in orthopaedic/dental implants such as cementeless endoprostheses or dental screws. The hardness 4.7 GPa and elastic modulus 69.7 GPa, of the coating were comparable to plasma sprayed hydroxyapatite/dental enamel, whilst superseding femoral cortical bone. To investigate the manufacturing challenge of translation from a target to vapour condensed coating, structural/compositional properties of the target (P51MQ) were compared to the coating (P40PVD) and a melt-quenched equivalent (P40MQ). Following condensation from P51MQ to P40PVD, P 2 O 5 content reduced from 48.9 to 40.5 mol%. This depolymerisation and reduction in the P-O-P bridging oxygen content as determined by 31 P NMR, FTIR and Raman spectroscopy techniques was attributed to a decrease in the P 2 O 5 network former and increases in alkali/alkali-earth cations. P40PVD appeared denser (3.47 vs. 2.70 g cm -3 ) and more polymerised than it's compositionally equivalent P40MQ, showing that structure/ mechanical properties were affected by manufacturing route. Copyright © 2018. Published by Elsevier Ltd.

Postvibration depression of the H-reflex as a result of a dual mechanism: an experimental study in humans.

PubMed

Abbruzzese, M; Minatel, C; Reni, L; Favale, E

2001-09-01

Changes in amplitude of the soleus H (S(H))-reflex and its neurographic correlates (P(1) and P(2) waves) after vibration of the soleus muscle have been evaluated as a function of mechanical stimulation frequency, duration of the conditioning train, and test stimulus intensity. Additional experiments aimed at assessing the nervous system mechanisms underlying the postvibration depression (PVD) have been performed. In particular, homonymous (S(HMR) or S(H)) versus heteronymous (S(HTR)) soleus response, evoked respectively by tibial nerve and femoral nerve electrical stimulation, the effectiveness of sub-H threshold tibial nerve conditioning volleys on the S(HTR), and the respective effects of a brief passive stretching of the quadriceps and soleus muscles on the recovery of both the S(HMR) and S(HTR) after vibration of the homologous muscle were investigated under suitable experimental conditions. It was found that PVD occurs in the absence of changes in amplitude of the P(1) wave and the S(HTR), is paralleled by a reduced effectiveness of tibial nerve-conditioning volleys on the S(HTR) and is shortened consistently by brief passive stretching of the homologous muscle. It follows that PVD may be the result of a long-lasting reduction of the transmitter release from Ia presynaptic terminals depending, at least in part, on a protracted postvibration Ia afferent discharge caused by spindles thixotropy. These findings may provide a better understanding of the pathophysiologic mechanisms underlying spasticity in humans.

Black hole mass measurement using molecular gas kinematics: what ALMA can do

NASA Astrophysics Data System (ADS)

Yoon, Ilsang

2017-04-01

We study the limits of the spatial and velocity resolution of radio interferometry to infer the mass of supermassive black holes (SMBHs) in galactic centres using the kinematics of circum-nuclear molecular gas, by considering the shapes of the galaxy surface brightness profile, signal-to-noise ratios (S/Ns) of the position-velocity diagram (PVD) and systematic errors due to the spatial and velocity structure of the molecular gas. We argue that for fixed galaxy stellar mass and SMBH mass, the spatial and velocity scales that need to be resolved increase and decrease, respectively, with decreasing Sérsic index of the galaxy surface brightness profile. We validate our arguments using simulated PVDs for varying beam size and velocity channel width. Furthermore, we consider the systematic effects on the inference of the SMBH mass by simulating PVDs including the spatial and velocity structure of the molecular gas, which demonstrates that their impacts are not significant for a PVD with good S/N unless the spatial and velocity scale associated with the systematic effects are comparable to or larger than the angular resolution and velocity channel width of the PVD from pure circular motion. Also, we caution that a bias in a galaxy surface brightness profile owing to the poor resolution of a galaxy photometric image can largely bias the SMBH mass by an order of magnitude. This study shows the promise and the limits of ALMA observations for measuring SMBH mass using molecular gas kinematics and provides a useful technical justification for an ALMA proposal with the science goal of measuring SMBH mass.

A new material platform of Si photonics for implementing architecture of dense wavelength division multiplexing on Si bulk wafer.

PubMed

Zhang, Ziyi; Yako, Motoki; Ju, Kan; Kawai, Naoyuki; Chaisakul, Papichaya; Tsuchizawa, Tai; Hikita, Makoto; Yamada, Koji; Ishikawa, Yasuhiko; Wada, Kazumi

2017-01-01

A new materials group to implement dense wavelength division multiplexing (DWDM) in Si photonics is proposed. A large thermo-optic (TO) coefficient of Si malfunctions multiplexer/demultiplexer (MUX/DEMUX) on a chip under thermal fluctuation, and thus DWDM implementation, has been one of the most challenging targets in Si photonics. The present study specifies an optical materials group for DWDM by a systematic survey of their TO coefficients and refractive indices. The group is classified as mid-index contrast optics (MiDex) materials, and non-stoichiometric silicon nitride (SiN x ) is chosen to demonstrate its significant thermal stability. The TO coefficient of non-stoichiometric SiN x is precisely measured in the temperature range 24-76 °C using the SiN x rings prepared by two methods: chemical vapor deposition (CVD) and physical vapor deposition (PVD). The CVD-SiN x ring reveals nearly the same TO coefficient reported for stoichiometric CVD-Si 3 N 4 , while the value for the PVD-SiN x ring is slightly higher. Both SiN x rings lock their resonance frequencies within 100 GHz in this temperature range. Since CVD-SiN x needs a high temperature annealing to reduce N-H bond absorption, it is concluded that PVD-SiN x is suited as a MiDex material introduced in the CMOS back-end-of-line. Further stabilization is required, considering the crosstalk between two channels; a 'silicone' polymer is employed to compensate for the temperature fluctuation using its negative TO coefficient, called athermalization. This demonstrates that the resonance of these SiN x rings is locked within 50 GHz at the same temperature range in the wavelength range 1460-1620 nm (the so-called S, C, and L bands in optical fiber communication networks). A further survey on the MiDex materials strongly suggests that Al 2 O 3 , Ga 2 O 3 Ta 2 O 5 , HfO 2 and their alloys should provide even more stable platforms for DWDM implementation in MiDex photonics. It is discussed that the MiDex photonics

[(S)-1-Carbamoylethyl]bis(dimethylglyoximato-kappa2N,N')[(S)-1-phenylethylamine]cobalt(III) and bis(dimethylglyoximato-kappa2N,N')[(R)-1-(N-methylcarbamoyl)ethyl][(R)-1-phenylethylamine]cobalt(III) monohydrate.

PubMed

Orisaku, Keiko Komori; Hagiwara, Mieko; Ohgo, Yoshiki; Arai, Yoshifusa; Ohgo, Yoshiaki

2005-04-01

The title complexes, [Co(C3H6NO)(C4H7N2O2)2(C8H11N)] and [Co(C4H8NO)(C4H7N2O2)2(C8H11N)].H2O, were resolved from [(RS)-1-carbamoylethyl]bis(dimethylglyoximato)[(S)-1-phenylethylamine]cobalt(III) and bis(dimethylglyoximato)[(RS)-1-(N-methylcarbamoyl)ethyl][(R)-1-phenylethylamine]cobalt(III), respectively, and their crystal structures were determined in order to reveal the absolute configuration of the major enantiomer produced in the photoisomerization of each series of 2-carbamoylethyl and 2-(N-methylcarbamoyl)ethyl cobaloxime complexes.

Daily associations between partner responses and sexual and relationship satisfaction in couples coping with provoked vestibulodynia.

PubMed

Rosen, Natalie O; Muise, Amy; Bergeron, Sophie; Delisle, Isabelle; Baxter, Mary Lou

2015-04-01

Women with provoked vestibulodynia (PVD) experience a recurrent vulvo-vaginal pain triggered primarily during sexual intercourse. Although affected couples report adverse effects on their sexual and global romantic relationships, few studies have examined interpersonal factors that may influence their sexual and relationship satisfaction. Cross-sectional studies have shown that greater partner solicitous and negative responses and lower facilitative responses are associated with poorer sexual and relationship satisfaction in women with PVD. The aim of this study was to investigate the within-person associations between partner responses to painful intercourse and the sexual and relationship satisfaction of affected couples. In a dyadic daily experience study, 69 women (M(age) = 28.46, SD = 6.66) diagnosed with PVD and their cohabitating male partners (M(age) = 30.29, SD = 8.13) reported on male partner responses, as well as sexual and relationship satisfaction on sexual intercourse days (M = 6.81; SD = 5.40) over 8 weeks. Dependent measures were the (i) Kansas Marital Satisfaction Scale and (ii) Global Measure of Sexual Satisfaction Scale. On sexual intercourse days when women perceived more facilitative partner responses than usual and on days when they perceived lower negative partner responses than usual, they reported higher sexual and relationship satisfaction. On sexual intercourse days when men reported more solicitous responses than usual, both they and their female partners reported lower sexual satisfaction. Interventions aimed at improving the day-to-day sexual and relationship satisfaction of couples with PVD should target increasing facilitative and decreasing negative and solicitous partner responses. © 2015 International Society for Sexual Medicine.

Growth, structure and stability of sputter-deposited MoS2 thin films.

PubMed

Kaindl, Reinhard; Bayer, Bernhard C; Resel, Roland; Müller, Thomas; Skakalova, Viera; Habler, Gerlinde; Abart, Rainer; Cherevan, Alexey S; Eder, Dominik; Blatter, Maxime; Fischer, Fabian; Meyer, Jannik C; Polyushkin, Dmitry K; Waldhauser, Wolfgang

2017-01-01

Molybdenum disulphide (MoS 2 ) thin films have received increasing interest as device-active layers in low-dimensional electronics and also as novel catalysts in electrochemical processes such as the hydrogen evolution reaction (HER) in electrochemical water splitting. For both types of applications, industrially scalable fabrication methods with good control over the MoS 2 film properties are crucial. Here, we investigate scalable physical vapour deposition (PVD) of MoS 2 films by magnetron sputtering. MoS 2 films with thicknesses from ≈10 to ≈1000 nm were deposited on SiO 2 /Si and reticulated vitreous carbon (RVC) substrates. Samples deposited at room temperature (RT) and at 400 °C were compared. The deposited MoS 2 was characterized by macro- and microscopic X-ray, electron beam and light scattering, scanning and spectroscopic methods as well as electrical device characterization. We find that room-temperature-deposited MoS 2 films are amorphous, of smooth surface morphology and easily degraded upon moderate laser-induced annealing in ambient conditions. In contrast, films deposited at 400 °C are nano-crystalline, show a nano-grained surface morphology and are comparatively stable against laser-induced degradation. Interestingly, results from electrical transport measurements indicate an unexpected metallic-like conduction character of the studied PVD MoS 2 films, independent of deposition temperature. Possible reasons for these unusual electrical properties of our PVD MoS 2 thin films are discussed. A potential application for such conductive nanostructured MoS 2 films could be as catalytically active electrodes in (photo-)electrocatalysis and initial electrochemical measurements suggest directions for future work on our PVD MoS 2 films.

Growth, structure and stability of sputter-deposited MoS2 thin films

PubMed Central

Bayer, Bernhard C; Resel, Roland; Müller, Thomas; Skakalova, Viera; Habler, Gerlinde; Abart, Rainer; Cherevan, Alexey S; Eder, Dominik; Blatter, Maxime; Fischer, Fabian; Meyer, Jannik C; Polyushkin, Dmitry K; Waldhauser, Wolfgang

2017-01-01

Molybdenum disulphide (MoS2) thin films have received increasing interest as device-active layers in low-dimensional electronics and also as novel catalysts in electrochemical processes such as the hydrogen evolution reaction (HER) in electrochemical water splitting. For both types of applications, industrially scalable fabrication methods with good control over the MoS2 film properties are crucial. Here, we investigate scalable physical vapour deposition (PVD) of MoS2 films by magnetron sputtering. MoS2 films with thicknesses from ≈10 to ≈1000 nm were deposited on SiO2/Si and reticulated vitreous carbon (RVC) substrates. Samples deposited at room temperature (RT) and at 400 °C were compared. The deposited MoS2 was characterized by macro- and microscopic X-ray, electron beam and light scattering, scanning and spectroscopic methods as well as electrical device characterization. We find that room-temperature-deposited MoS2 films are amorphous, of smooth surface morphology and easily degraded upon moderate laser-induced annealing in ambient conditions. In contrast, films deposited at 400 °C are nano-crystalline, show a nano-grained surface morphology and are comparatively stable against laser-induced degradation. Interestingly, results from electrical transport measurements indicate an unexpected metallic-like conduction character of the studied PVD MoS2 films, independent of deposition temperature. Possible reasons for these unusual electrical properties of our PVD MoS2 thin films are discussed. A potential application for such conductive nanostructured MoS2 films could be as catalytically active electrodes in (photo-)electrocatalysis and initial electrochemical measurements suggest directions for future work on our PVD MoS2 films. PMID:28685112

Comparison of mechanical behavior of TiN, TiNC, CrN/TiNC, TiN/TiNC films on 9Cr18 steel by PVD

NASA Astrophysics Data System (ADS)

Feng, Xingguo; Zhang, Yanshuai; Hu, Hanjun; Zheng, Yugang; Zhang, Kaifeng; Zhou, Hui

2017-11-01

TiN, TiNC, CrN/TiNC and TiN/TiNC films were deposited on 9Cr18 steel using magnetron sputtering technique. The morphology, composition, chemical state and crystalline structure of the films were observed and analyzed by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Hardness and adhesion force were tested by nanoindentation and scratch tester, respectively. The friction and wear behavior of TiN, TiNC, CrN/TiNC and TiN/TiNC films sliding against GCr15 balls were investigated and compared synthetically using ball-on-disk tribometer. It was found that Tisbnd N, Tisbnd C, Tisbnd Nsbnd C and Csbnd C bonds were formed. The TiN/TiNC film was composed of TiN, TiC and TiNC phases. Hardness and adhesion force results indicated that although the TiN film possessed the highest hardness, its adhesion force was lowest among all the films. Tribological test results showed that the friction coefficient of TiN/TiNC was much lower than that of TiN and the wear rate decreases remarkably from 2.3 × 10-15 m3/Nm to 7.1 × 10-16 m3/Nm, which indicated the TiN/TiNC film has better wear resistance.

Manifestation of Crystal Lattice Distortions in the IR Reflection Spectra of Abrasion-Treated ZnSe Ceramics

NASA Astrophysics Data System (ADS)

Sitnikova, V. E.; Dunaev, A. A.; Mamalimov, R. I.; Pakhomov, P. M.; Khizhnyak, S. D.; Chmel, A. E.

2017-07-01

The Fourier IR reflection spectra of ZnSe ceramics prepared by hot pressing (HP), physical vapor deposition (PVD), and PVD combined with hot isostatic pressing (HIP) are presented. The optical constants of polished and dry-ground specimens were used for comparison. The grinding treatment simulated the erosion of the outer surface of optical elements made of zinc selenide under the influence of solid dust particles and deposits. In the polished specimens residual stresses showed up in the IR reflection spectra of the ZnSePVD and ZnSeHIP ceramics, which had well-defined orientation of grains, but were not present in the spectra of the ZnSeHIP ceramics as a result of mutual compensation of the stresses in the randomly oriented grains of the material. The stresses, which appeared as a shift of the absorption bands calculated by the Kramers-Kronig method, increased significantly after abrasive treatment of the specimens. For all the treated ceramics the intensity of the absorption bands resulting from the anharmonicity of the vibrations in the distorted crystal lattice increased by several times. The last effect also depends on the production prehistory of the ceramics.

Quasi-solid state electrolyte for semi-transparent bifacial dye-sensitized solar cell with over 10% power conversion efficiency

NASA Astrophysics Data System (ADS)

Hwang, Dae-Kue; Nam, Jung Eun; Jo, Hyo Jeong; Sung, Shi-Joon

2017-09-01

In traditional dye-sensitized solar cells (DSSCs), the liquid electrolyte (LE) presents a problem for long-term stability. Herein, we demonstrate a bifacial DSSC by combining a new metal-free organic dye and a quasi-solid state electrolyte (QSSE) that contains poly(vinylidenefluoride-co-hexafluoropropylene) (PVdF-HFP)-based polymer gel. The incident light irradiates the front side of the DSSC, and the transmitted light is reused after reflection on the back side. Owing to the semi-transparent DSSC electrode, the reflected light can penetrate and be absorbed by the dye molecules in the DSSC, thereby enhancing the short-circuit current density and thus the overall power conversion efficiency (PCE). The PCE for the DSSC device with QSSE from bifacial irradiation is 10.37%, a value that is comparable to that obtained with LE-based DSSC (9.89%). The stability of the device is enhanced when the polymer gel containing PVdF-HFP is mixed with the LE, and the effectiveness of PVdF-HFP as a gelator is attributed to its interaction with the Li+ ions. Based on our preliminary results, this architecture can lead to more stable bifacial QSSE-based DSSCs without sacrificing the photovoltaic performance.

Phospholipid analysis and fractional reconstitution of the ice nucleation protein activity purified from Escherichia coli overexpressing the inaZ gene of Pseudomonas syringae.

PubMed

Palaiomylitou, M A; Kalimanis, A; Koukkou, A I; Drainas, C; Anastassopoulos, E; Panopoulos, N J; Ekateriniadou, L V; Kyriakidis, D A

1998-08-01

Ice nucleation protein was partially purified from the membrane fraction of E. coli carrying inaZ from Pseudomonas syringae. The ice nucleation protein was totally localized in the bacterial envelope and was extracted by either salt (0.25 M NH4Cl) or the nonionic detergent Tween 20. The extracted protein was partially purified by sequential passage through DEAE-52 cellulose and Sephacryl-S400 columns. The activity of the purified protein was lost after treatment with phospholipase C, and its activity was subsequently restored by addition of the naturally occurring lipid phosphatidylethanolamine. These results suggest that ice nucleation proteins have a requirement for lipids that reconstitute a physiological hydrophobic environment similar to the one existing in vivo, to attain and maintain a structure that enables ice catalysis. Copyright 1998 Academic Press.

Use of ECT in the presence of acute bilateral posterior vitreous detachmanet.

PubMed

Taye, Tesema; Dobranici, Letitia; Fisher, Mark; Cullum, Sarah

2018-04-01

We describe a case of acute bilateral posterior vitreous detachment (PVD) in a 71-year-old female, which developed during a course of electroconvulsive therapy (ECT) for treatment-resistant depression. The risks and benefits of continuing ECT were assessed and the patient completed the full course of 16 ECT treatments without further ophthalmic complications. As the incidence of PVD increases with age, and ECT is used more frequently in elderly people with depression, we recommend paying attention to ophthalmic symptoms as part of the routine clinical monitoring of ECT side effects. If ophthalmic symptoms occur, the risks and benefits of ECT need to be weighed up including consultation with an ophthalmologist.

Electrospun nanocomposite fibrous polymer electrolyte for secondary lithium battery applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Padmaraj, O.; Rao, B. Nageswara; Jena, Paramananda

2014-04-24

Hybrid nanocomposite [poly(vinylidene fluoride -co- hexafluoropropylene) (PVdF-co-HFP)/magnesium aluminate (MgAl{sub 2}O{sub 4})] fibrous polymer membranes were prepared by electrospinning method. The prepared pure and nanocomposite fibrous polymer electrolyte membranes were soaked into the liquid electrolyte 1M LiPF{sub 6} in EC: DEC (1:1,v/v). XRD and SEM are used to study the structural and morphological studies of nanocomposite electrospun fibrous polymer membranes. The nanocomposite fibrous polymer electrolyte membrane with 5 wt.% of MgAl{sub 2}O{sub 4} exhibits high ionic conductivity of 2.80 × 10{sup −3} S/cm at room temperature. The charge-discharge capacity of Li/LiCoO{sub 2} coin cells composed of the newly prepared nanocomposite [(16more » wt.%) PVdF-co-HFP+(5 wt.%) MgAl{sub 2}O{sub 4}] fibrous polymer electrolyte membrane was also studied and compared with commercial Celgard separator.« less

XPS investigations of tribolayers formed on TiN and (Ti,Re)N coatings

NASA Astrophysics Data System (ADS)

Oktay, Serkan; Kahraman, Zafer; Urgen, Mustafa; Kazmanli, Kursat

2015-02-01

TiN and (Ti,Re)N coatings were deposited on high-speed-steel substrates by a hybrid coating system composed of cathodic arc PVD and magnetron sputtering techniques. In order to keep rhenium content low (8 ± 1.9 at.%) in the coating, magnetron sputtering technique was utilized to evaporate rhenium. The (Ti,Re)N coating consisted of TiN and ReNx (x > 1.33) phases. The hardness of TiN and (Ti,Re)N were 31 GPa and 29 GPa (± 2 GPa), respectively. Tribological behaviors of the samples were tested against Al2O3 balls at 21 °C (RT) and 150 °C (HT) by reciprocating wear technique. The tribolayers were analyzed by XPS technique. Friction coefficients of TiN were 0.56, 0.35 for 21 °C and 150 °C tests, respectively. Rhenium addition to TiN drastically dropped the friction coefficients to 0.22 and 0.17 for RT and HT samples. Rhenium addition also improved the wear resistance of the coating at both test temperatures. For TiN, main oxide component of the tribolayers was Ti2O3 for RT tests and TiO2 for HT tests. The oxide layer formed on (Ti,Re)N were the mixture of TiO2, Tisbnd Osbnd N, ReO2 and Re2O7 for both test temperatures. Re2O7 provided very low friction coefficient to (Ti,Re)N. The findings are consistent with the crystal chemistry approach.

Applying Chromatography.

ERIC Educational Resources Information Center

Klein, Jessie W.; Patev, Paul

1998-01-01

Presents three experiments to introduce students to different kinds of chromatography: (1) paper chromatography; (2) gel filtration chromatography; and (3) reverse-phase liquid chromatography. Written in the form of a laboratory manual, explanations of each of the techniques, materials needed, procedures, and a glossary are included. (PVD)

Electrostatic Radio Frequency (RF) Microelectromechanical Systems (MEMS) Switches With Metal Alloy Electric Contacts

DTIC Science & Technology

2004-09-01

Serway , Raymond A. Physics for Scientists and Engineers . New York: Saunders College Publishing, 1986. 141. Sharvin, Y.V. Sov. Phys. JETP , 21 :655 (1965...III. Theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3.1 Micro-Switch Physical Description . . . . . . . . . . . 17 3.2 MEMS...Insertion Loss . . . . . . . . . . . . . . . . . . . . . . . . 56 IMD Intermodulation Distortion . . . . . . . . . . . . . . . . 56 PVD Physical Vapor

Derivation of WECC Distributed PV System Model Parameters from Quasi-Static Time-Series Distribution System Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mather, Barry A; Boemer, Jens C.; Vittal, Eknath

The response of low voltage networks with high penetration of PV systems to transmission network faults will, in the future, determine the overall power system performance during certain hours of the year. The WECC distributed PV system model (PVD1) is designed to represent small-scale distribution-connected systems. Although default values are provided by WECC for the model parameters, tuning of those parameters seems to become important in order to accurately estimate the partial loss of distributed PV systems for bulk system studies. The objective of this paper is to describe a new methodology to determine the WECC distributed PV system (PVD1)more » model parameters and to derive parameter sets obtained for six distribution circuits of a Californian investor-owned utility with large amounts of distributed PV systems. The results indicate that the parameters for the partial loss of distributed PV systems may differ significantly from the default values provided by WECC.« less

Development of Low Density Titanium Alloys for Structural Applications

NASA Technical Reports Server (NTRS)

Froes, F. H.; Suryanarayana, C.; Powell, C.; Ward-Close, C. Malcolm; Wilkes, D. M. J.

1996-01-01

In this report the results of a program designed to reduce the density of titanium by adding magnesium are presented. Because these two elements are immiscible under conventional ingot metallurgy techniques, two specialized powder metallurgy methods namely, mechanical alloying (MA) and physical vapor deposition (PVD) were implemented. The mechanical alloying experiments were done both at the University of Idaho and at the Defense Research Agency in UK. Since titanium is reactive with interstitial elements, a secondary goal of this research was to correlate solubility extensions with interstitial contamination content, especially oxygen and nitrogen. MA was carried out in SPEX 8000 shaker mils and different milling containers were utilized to control the level of contamination. Results showed that solubilities of Mg in Ti were obtained up to 28 at.% (16.4 wt. %) Mg in Ti for Ti-39.6 at. % (25 wt. %) Mg alloys, which greatly exceed those obtained under equilibrium conditions. This reflects a density reduction of approximately 26 %. Contamination of oxygen and nitrogen seemed to increase the solubility of magnesium in titanium in some cases; however, we were not able to make a clear correlation between contamination levels with solubilities. Work at the DRA has emphasized optimization of present PVD equipment, specifically composition and temperature control. Preliminary PVD data has shown Ti-Mg deposits have successfully been made up to 2 mm thick and that solubility extensions were achieved. The potential for density reduction of titanium by alloying with magnesium has been demonstrated; however, this work has only scratched the surface of the development of such low density alloys. Much research is needed before such alloys could be implemented into industry. Further funding is required in order to optimize the MA/PVD processes including contamination control, determination of optimal alloy compositions, microstructure development, and mechanical property

The inter-arm blood pressure difference and peripheral vascular disease: cross-sectional study.

PubMed

Clark, Christopher E; Campbell, John L; Powell, Roy J; Thompson, John F

2007-10-01

A blood pressure (BP) difference between the upper limbs is often encountered in primary care. Knowledge of its prevalence and importance in the accurate measurement of BP is poor, representing a source of error. Current hypertension guidelines do not emphasize this. To establish the prevalence of an inter-arm blood pressure difference (IAD) and explore its association with other indicators of peripheral vascular disease (PVD) in a hypertensive primary care population. This was a cross-sectional study. Primary care, one rural general practice, was the setting of the study. The methods were controlled simultaneous measurement of brachial BPs, ankle-brachial pressure index (ABPI) and tiptoe stress testing in 94 subjects. In all, 18 of 94 [19%, 95% confidence interval (CI) 11-27%] subjects had mean systolic inter-arm difference (sIAD) > or =10 mmHg and seven of 94 (7%, 95% CI 2-12%) had mean diastolic inter-arm difference (dIAD) > or =10 mmHg. Nineteen of 91 (20%, 95% CI 12-28%) had a reduced ABPI <0.9. There was negative correlation between systolic (Pearson's correlation coefficient - 0.378; P = 0.01) and diastolic (Pearson's correlation coefficient - 0.225; P = 0.05) magnitudes of IAD with ABPI. On tiptoe testing, 9/90 subjects (10%, 95% CI 4-16%) had a pressure drop > or =20%. An IAD and asymptomatic PVD are common in a primary care hypertensive population. Magnitude of the IAD is inversely correlated with ABPI, supporting the hypotheses that IADs are causally linked to PVD, and that IAD is a useful marker for the presence of PVD. Consequently, detection of an IAD should prompt the clinician to screen subjects for other signs of vascular disease and target them for aggressive cardiovascular risk factor modification.

Cost-Utility of Evaluation for Posterior Vitreous Detachment and Prophylaxis of Retinal Detachment.

PubMed

Yannuzzi, Nicolas A; Chang, Jonathan S; Brown, Gary C; Smiddy, William E

2018-01-01

To evaluate the costs and cost-utility of examination for posterior vitreous detachment (PVD) and treatment of associated pathology, and of managing various other peripheral retinal disorders to prevent retinal detachment (RD). A decision analysis model of cost-utility. There were no participants. Published retrospective data on the natural course of PVD, retinal tears, and lattice degeneration were used to quantitate the visual benefits of examination and treatment. Center for Medicare and Medicaid Services data were used to calculate associated modeled costs in a hospital/facility-based and nonfacility/ambulatory surgical center (ASC)-based setting. Published standards of utility for a given level of visual acuity were used to derive costs and quality-adjusted life years (QALYs). Cost of evaluation and treatment, utility of defined health states, QALY, and cost per QALY. The modeled cost of evaluation of a patient with PVD and treatment of associated pathology in the facility/hospital (nonfacility/ASC)-based setting was $65 to $190 ($25-$71) depending on whether a single or 2-examination protocol was used. The cost per QALY saved was $255 to $638/QALY ($100-$239/QALY). Treatment of a symptomatic horseshoe tear resulted in a net cost savings of $1749 ($1314) and improved utility, whereas treatment of an asymptomatic horseshoe tear resulted in $2981/QALY ($1436/QALY). Treatment of asymptomatic lattice degeneration in an eye in which the fellow eye had a history of RD resulted in $4414/QALY ($2187/QALY). Evaluation and management of incident acute PVD (and symptomatic horseshoe tears) offer a low cost and a favorable cost-utility (low $/QALY) as a result of the minimization of the cost and morbidity associated with the development of RD, thus justifying current practice standards. Copyright © 2017 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

Variable Expressivity of a Founder Mutation in the EIF2AK4 Gene in Hereditary Pulmonary Veno-occlusive Disease and Its Impact on Survival.

PubMed

Navas Tejedor, Paula; Palomino Doza, Julián; Tenorio Castaño, Jair Antonio; Enguita Valls, Ana Belén; Rodríguez Reguero, José Julián; Martínez Meñaca, Amaya; Hernández González, Ignacio; Bueno Zamora, Héctor; Lapunzina Badía, Pablo Daniel; Escribano Subías, Pilar

2018-02-01

Hereditary pulmonary veno-occlusive disease (PVOD) has been associated with biallelic mutations in EIF2AK4 with the recent discovery of a founder mutation in Iberian Romani patients with familial PVOD. The aims of this study were phenotypical characterization and survival analysis of Iberian Romani patients with familial PVOD carrying the founder p.Pro1115Leu mutation in EIF2AK4, according to their tolerance to pulmonary vasodilators (PVD). Familial genetic screening was conducted, as well as assessment of sociocultural determinants with a potential influence on disease course. Observational study of Romani patients with familial PVOD included in the Spanish Registry of Pulmonary Arterial Hypertension. Genetic screening of EIF2AK4 was performed in index cases and relatives between November 2011 and July 2016 and histological pulmonary examination was carried out in patients who received a lung transplant or died. The patients were divided into 2 groups depending on their tolerance to PVD, with comparison of baseline characteristics and survival free of death or lung transplant. Eighteen Romani patients were included: 9 index cases and 9 relatives. The biallelic founder mutation in EIF2AK4 was found in all affected cases and 2 unaffected relatives. Family screening showed 34.2% of healthy heterozygotes, high consanguinity, young age at childbirth, and frequent multiparity. Prognosis was bleak, with significant differences depending on tolerance to PVD. We describe 2 phenotypes of hereditary PVOD depending on tolerance to PVD, with prognostic impact and familial distribution. Consanguinity may have a negative impact on the transmission of PVOD, with familial genetic screening showing high effectiveness. Copyright © 2017 Sociedad Española de Cardiología. Published by Elsevier España, S.L.U. All rights reserved.

Electron beam physical vapor deposition of YSZ electrolyte coatings for SOFCs

NASA Astrophysics Data System (ADS)

He, Xiaodong; Meng, Bin; Sun, Yue; Liu, Bochao; Li, Mingwei

2008-09-01

YSZ electrolyte coatings were prepared by electron beam physical vapor deposition (EB-PVD) at a high deposition rate of up to 1 μm/min. The YSZ coating consisted of a single cubic phase and no phase transformation occurred after annealing treatment at 1000 °C. A typical columnar structure was observed in this coating by SEM and feather-like characteristics appeared in every columnar grain. In columnar grain boundaries there were many micron-sized gaps and pores. In TEM image, many white lines were found, originating from the alignment of nanopores existing within feather-like columnar grains. The element distribution along the cross-section of the coating was homogeneous except Zr with a slight gradient. The coating exhibited a characteristic anisotropic behavior in electrical conductivity. In the direction perpendicular to coating surface the electrical conductivity was remarkably higher than that in the direction parallel to coating surface. This mainly attributed to the typical columnar structure for EB-PVD coating and the existence of many grain boundaries along the direction parallel to coating surface. For as-deposited coating, the gas permeability coefficient of 9.78 × 10 -5 cm 4 N -1 s -1 was obtained and this value was close to the critical value of YSZ electrolyte layer required for solid oxide fuel cell (SOFC) operation.

Advances on Propulsion Technology for High-Speed Aircraft. Volume 1

DTIC Science & Technology

2007-03-01

sprayed Cu -3% Ag alloys , ITSC 2001 - Singapour - 6dit6e par C.C. Berndt - K.A. Khor et E.F. Lugscheider - ASM-TSS - Materials park - OH-USA, p.633... spraying of CuCrNb powder and a more advanced approach which combines the advantages of a high temperature, low density and porous carbon-fibre...physical vapour deposition (EB-PVD), vacuum plasma spraying (VPS) and solution plasma spraying (SPS) [38-41]. A segmented sub-scale model combustor with

Pulmonary Hypertension and Vascular Abnormalities in Bronchopulmonary Dysplasia

PubMed Central

Mourani, Peter M.; Abman, Steven H.

2015-01-01

Advances in the care of preterm infants have improved survival of infants born at earlier gestational ages. Yet, these infants remain at risk for the chronic lung disease of infancy, bronchopulmonary dysplasia (BPD), which results in prolonged need for supplemental oxygen, recurrent respiratory exacerbations, and exercise intolerance. Recent investigations have highlighted the important contribution of the developing pulmonary circulation to lung development, demonstrating that these infants are also at risk for pulmonary vascular disease (PVD), including pulmonary hypertension (PH) and pulmonary vascular abnormalities, which contributes significantly to morbidity and mortality. In the past few years, several epidemiological studies have delineated the incidence of PH in preterm infants and the impact on outcomes. However, these studies have also highlighted gaps in our understanding of PVD in BPD, including universally accepted definitions, approaches to diagnosis and treatment, and patient outcomes. Associated pulmonary vascular and cardiac abnormalities are increasingly recognized complications contributing to PH in these infants, but incidence of these lesions and degree of contribution to disease remains unknown. Therapeutic strategies for PVD in BPD are largely untested, but recent evidence presents the rationale for the approach to diagnosis and treatment of BPD infants with PH that can be evaluated in future studies. PMID:26593082

Free vibration of an embedded single-walled carbon nanotube with various boundary conditions using the RMVT-based nonlocal Timoshenko beam theory and DQ method

NASA Astrophysics Data System (ADS)

Wu, Chih-Ping; Lai, Wei-Wen

2015-04-01

The nonlocal Timoshenko beam theories (TBTs), based on the Reissner mixed variation theory (RMVT) and principle of virtual displacement (PVD), are derived for the free vibration analysis of a single-walled carbon nanotube (SWCNT) embedded in an elastic medium and with various boundary conditions. The strong formulations of the nonlocal TBTs are derived using Hamilton's principle, in which Eringen's nonlocal constitutive relations are used to account for the small-scale effect. The interaction between the SWCNT and its surrounding elastic medium is simulated using the Winkler and Pasternak foundation models. The frequency parameters of the embedded SWCNT are obtained using the differential quadrature (DQ) method. In the cases of the SWCNT without foundations, the results of RMVT- and PVD-based nonlocal TBTs converge rapidly, and their convergent solutions closely agree with the exact ones available in the literature. Because the highest order with regard to the derivatives of the field variables used in the RMVT-based nonlocal TBT is lower than that used in its PVD-based counterpart, the former is more efficient than the latter with regard to the execution time. The former is thus both faster and obtains more accurate solutions than the latter for the numerical analysis of the embedded SWCNT.

Cast iron cutting with nano TiN and multilayer TiN-CrN coated inserts

NASA Astrophysics Data System (ADS)

Perucca, M.; Durante, S.; Semmler, U.; Rüger, C.; Fuentes, G. G.; Almandoz, E.

2012-09-01

During the past decade great success has been achieved in the development of duplex and multilayer multi-functional surface systems. Among these surface systems outstanding properties have nanoscale multilayer coatings. Within the framework of the M3-2S project funded in the 7th European Framework Programme, several nanoscale multilayer coatings have been developed and investigated for experimental and industrial validation. This paper shows the performance of TiN and TiN/CrN nanoscale multilayer coatings on WC cutting inserts when machining GJL250 cast iron. The thin films have been deposited by cathodic arc evaporation in an industrial PVD system. The multilayer deposition characteristic and its properties are shown. The inserts have been investigated in systematic cutting experiments of cast iron bars on a turning machine specifically equipped for force measurements, accompanied by wear determination. Furthermore, equivalent experiments have been carried out on an industrial turning unit. Industrial validation criteria have been applied to assess the comparative performance of the coatings. The choice of the material and the machined parts is driven by an interest in automotive applications. The industrial tests show the need to further optimise the multi-scale modelling approach in order to reduce the lead time of the coating development as well as to improve simulation reliability.

Relationships Between 3-Dimensional Transperineal Ultrasound Imaging and Digital Intravaginal Palpation Assessments of the Pelvic Floor Muscles in Women With and Without Provoked Vestibulodynia.

PubMed

Thibault-Gagnon, Stéphanie; Goldfinger, Corrie; Pukall, Caroline; Chamberlain, Susan; McLean, Linda

2018-03-01

Digital intravaginal palpation remains the favored method for clinical assessment of pelvic floor muscle (PFM) function in women; however, there is growing interest in using transperineal ultrasound imaging (TPUSI). TPUSI does not involve vaginal penetration, making it particularly relevant for PFM assessment in women with genito-pelvic pain and penetration disorders. To study the relations between measures of PFM morphology and function assessed using 3-dimensional (3D) TPUSI and PFM assessment through intravaginal palpation. 77 nulliparous premenopausal women with (n = 38) and without (n = 39) PVD participated. 3D TPUSI was used to measure levator hiatal dimensions at rest, at maximal voluntary contraction (MVC) of the PFMs, and at maximal Valsalva maneuver (MVM). Intravaginal palpation was used to assess PFM strength, PFM tone, PFM relaxation after contraction, and vaginal flexibility; each was scored using an ordinal grading scale. Ultrasound and palpation outcomes were compared using Spearman correlation coefficients and Kruskal-Wallis 1-way analyses of variance by rank. Outcomes included ultrasound measures of the levator hiatal area, anteroposterior diameter, and left-right transverse diameter at rest, at MVC, and at MVM; raw and relative changes in hiatal dimensions between rest and MVC and between rest and MVM; and palpation measures of PFM strength, tone, and relaxation after contraction, and vaginal flexibility. Weak to fair correlations were found between ultrasound and palpation measures. A smaller levator hiatus at rest was associated with greater PFM tone, less PFM relaxation, and less vaginal flexibility. Greater levator hiatal constriction and shortening of the hiatal anteroposterior diameter at MVC were associated with greater palpated PFM strength. Greater hiatal distention at MVM was associated with lower PFM tone and greater relaxation. 3D TPUSI and intravaginal palpation provide related but distinct information about PFM function in young

Confronting Seiberg's duality with r duality in N=1 supersymmetric QCD

NASA Astrophysics Data System (ADS)

Shifman, M.; Yung, A.

2012-09-01

Systematizing our results on r duality obtained previously we focus on comparing r duality with the generalized Seiberg duality in the r vacua of N=2 and N=1 super-Yang-Mills theories with the U(N) gauge group and Nf matter flavors (Nf>N). The number of condensed (s)quarks r is assumed to be in the interval (2)/(3)NfN. To pass to N=1 we introduce an N=2-breaking deformation, a mass term μ for the adjoint matter, eventually decoupling the adjoint matter in the limit of large μ. If one starts from a large value of the parameter ξ˜μm, where the original theory is at weak coupling, and let ξ decrease, one hits a crossover transition from weak to strong coupling (here m is a typical value of the quark masses). Below this transition the original theory is described in terms of a weakly coupled infrared-free r dual theory with the U(Nf-r) gauge group and Nf light quarklike dyon flavors. Dyon condensation leads to confinement of monopoles, defying a naive expectation of quark confinement. The quarks and gauge bosons of the original theory are in an “instead-of-confinement” phase. The r and Seiberg dualities are demonstrated to coincide in the r=N vacua. In the (2)/(3)Nf<r vacua two dualities do not match. In this window Seiberg’s dual is at strong coupling while our r-dual model is at weak coupling. Thus, we can speak of triality. Seiberg’s dual solution at weak coupling reappears again at r<(1)/(3)Nf.

Neuropathy and presence of emotional distress and depression in longstanding diabetes: Results from the Canadian study of longevity in type 1 diabetes.

PubMed

Bai, Johnny-Wei; Lovblom, Leif E; Cardinez, Marina; Weisman, Alanna; Farooqi, Mohammed A; Halpern, Elise M; Boulet, Genevieve; Eldelekli, Devrim; Lovshin, Julie A; Lytvyn, Yuliya; Keenan, Hillary A; Brent, Michael H; Paul, Narinder; Bril, Vera; Cherney, David Z I; Perkins, Bruce A

2017-08-01

To determine the association of neuropathy and other complications with emotional distress and depression among patients with longstanding type 1 diabetes (T1DM). Canadians with ≥50years of T1DM completed a questionnaire including assessment of distress and depression by the Problem Areas in Diabetes Scale (PAID) and Geriatric Depression Scale (GDS), respectively. Complications were determined using the Michigan Neuropathy Screening Instrument (Questionnaire Component), fundoscopy reports, renal function tests, and self-reported peripheral-(PVD) and cardiovascular (CVD) disease. Associations were analyzed by Poisson regression. Among 323 participants, 137 (42.4%) had neuropathy, 113 (36.5%) nephropathy, 207 (69.5%) retinopathy, 95 (29.4%) CVD, and 31 (9.8%) PVD. The neuropathy subgroup had higher prevalence of distress (13 (9.5%) vs. 6 (3.3%), p=0.029) and depression (34 (24.9%) vs. 12 (6.5%), p<0.001). Adjusting for diabetes complications, neuropathy was associated with higher PAID (adjusted RR 1.44 (95% CI 1.14-1.82), p=0.003) and GDS scores (adjusted RR1.57 (1.18-2.11), p=0.002). Independent of potential confounders, neuropathy remained associated with higher PAID (adjusted RR 1.39 (1.10-1.76), p=0.006) and GDS scores (adjusted RR 1.37 (1.03-1.83), p=0.032). Associations with neuropathy were not fully explained by neuropathic pain. Compared to other complications, neuropathy had the greatest association with distress and depression in longstanding T1DM, independent of pain. Strategies beyond pain management are needed to improve quality of life in diabetic neuropathy. Copyright © 2017. Published by Elsevier Inc.

Vapor Deposition Rig

NASA Image and Video Library

2015-01-27

The Plasma Spray-Physical Vapor Deposition (PS-PVD) Rig at NASA Glenn Research Center. The rig helps develop coatings for next-generation aircraft turbine components and create more efficient engines.

Subclinical ketosis in post-partum dairy cows fed a predominantly pasture-based diet: defining cut-points for diagnosis using concentrations of beta-hydroxybutyrate in blood and determining prevalence.

PubMed

Compton, C W R; Young, L; McDougall, S

2015-09-01

Firstly, to define, in dairy cows in the first 5 weeks post-calving fed a predominantly pasture-based diet, cut-points of concentrations of beta-hydroxybutyrate (BHBA) in blood, above which there were associations with purulent vaginal discharge (PVD), reduced pregnancy rates (PR) and decreased milk production, in order to better define subclinical ketosis (SCK) in such cattle; and secondly, to determine the prevalence, incidence and risk factors for SCK. An observational field study was conducted in 565 cows from 15 spring-calving and predominantly pasture-fed dairy herds in two regions of New Zealand during the 2010- 2011 dairy season. Within each herd, a cohort of randomly selected cows (approximately 40 per herd) was blood sampled to determine concentrations of BHBA on six occasions at weekly intervals starting within 5 days of calving. The key outcome variables were the presence/absence of PVD at 5 weeks post-calving, PR after 6 weeks (6-week PR) and after the completion of the breeding season (final PR), and mean daily milk solids production. Two cut-points for defining SCK were identified: firstly concentration of BHBA in blood≥1.2 mmol/L within 5 days post-calving, which was associated with an increased diagnosis of PVD (24 vs. 8%); and secondly concentration of BHBA in blood≥1.2 mmol/L at any stage within 5 weeks post-calving, which was associated with decreased 6-week PR (78 vs. 85%). The mean herd-level incidence of SCK within 5 weeks post-calving was 68 (min 12; max 100)% and large variations existed between herds in peak prevalence of SCK and the interval post-calving at which such peaks occurred. Cows>8 years of age and cows losing body condition were at increased risk of SCK within 5 weeks of calving. Cows with concentration of BHBA in blood≥1.2 mmol/L in early lactation had a higher risk of PVD and lower 6-week PR. Cow and herd-level prevalence of SCK varied widely in early lactation. Subclinical ketosis is common and is significantly

Development of biosensors for non-invasive measurements of heart failure biomarkers in saliva

NASA Astrophysics Data System (ADS)

Alcacer, Albert; Streklas, Angelos; Baraket, Abdoullatif; Zine, Nadia; Errachid, Abdelhamid; Bausells, Joan

2017-06-01

Biomedical engineering research today is focused on non-invasive techniques for detection of biomarkers related to specific health issues 1. Three metal layer microelectrode (μE) sensors have been implemented to detect specific biomarkers which can be found in human saliva related with heart failure problems 2 such as interleukin and Tumore Necrosis Factor-α (TNF-α), and used as highly sensitive saliva sensors. We designed specialized μEs combining different technologies for multiple measurements aiming to a lab-on-a-chip future integration. Measurements are based to basic principles of Cyclic Voltammetry (CV) and Electrochemical Impedance Spectroscopy (EIS). Thus, certain planar technology was used involving three metal layers of gold, platinum and silver deposited over an oxidized silicon substrate following standard cleanroom procedures of lithography for the definition of μEs, sputtering physical vapor deposition (PVD) for gold, evaporation PVD for silver and platinum, and plasma enhanced chemical vapor deposition (PECVD) for passivation layer of silicon nitride.

Preparation of Cobalt-Based Electrodes by Physical Vapor Deposition on Various Nonconductive Substrates for Electrocatalytic Water Oxidation.

PubMed

Wu, Yizhen; Wang, Le; Chen, Mingxing; Jin, Zhaoxia; Zhang, Wei; Cao, Rui

2017-12-08

Artificial photosynthesis requires efficient anodic electrode materials for water oxidation. Cobalt metal thin films are prepared through facile physical vapor deposition (PVD) on various nonconductive substrates, including regular and quartz glass, mica sheet, polyimide, and polyethylene terephthalate (PET). Subsequent surface electrochemical modification by cyclic voltammetry (CV) renders these films active for electrocatalytic water oxidation, reaching a current density of 10 mA cm -2 at a low overpotential of 330 mV in 1.0 m KOH solution. These electrodes are robust with unchanged activity throughout prolonged chronopotentiometry measurements. This work is thus significant to show that the combination of PVD and CV is very valuable and convenient to fabricate active electrodes on various nonconductive substrates, particularly with flexible polyimide and PET substrates. This efficient, safe and convenient method can potentially be expanded to many other electrochemical applications. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Mechanical Analogue for Chemical Potential, Extent of Reaction, and the Gibbs Energy.

ERIC Educational Resources Information Center

Glass, Samuel V.; DeKock, Roger L.

1998-01-01

Presents an analogy that relates the one-dimensional mechanical equilibrium of a rigid block between two Hooke's law springs and the chemical equilibrium of two perfect gases using ordinary materials. (PVD)

ON THE STRUCTURE OF \\mathcal{H}_{n - 1}-ALMOST EVERYWHERE CONVEX HYPERSURFACES IN \\mathbf{R}^{n + 1}

NASA Astrophysics Data System (ADS)

Dmitriev, V. G.

1982-04-01

It is proved that a hypersurface f imbedded in \\mathbf{R}^{n + 1}, n \\geq 2, which is locally convex at all points except for a closed set E with (n - 1)-dimensional Hausdorff measure \\mathcal{K}_{n - 1}(E) = 0, and strictly convex near E is in fact locally convex everywhere. The author also gives various corollaries. In particular, let M be a complete two-dimensional Riemannian manifold of nonnegative curvature K and E \\subset M a closed subset for which \\mathcal{K}_1(E) = 0. Assume further that there exists a neighborhood U \\supset E such that K(x) > 0 for x \\in U \\setminus E, f \\colon M \\to \\mathbf{R}^3 is such that f\\big\\vert _{U \\setminus E} is an imbedding, and f\\big\\vert _{M \\setminus E} \\in C^{1, \\alpha}, \\alpha > 2/3. Then f(M) is a complete convex surface in \\mathbf{R}^3. This result is an generalization of results in the paper reviewed in MR 51 # 11374.Bibliography: 19 titles.

Observation of neovascularization of the disc associated with proliferative diabetic retinopathy using OCT angiography.

PubMed

Akiyama, Hideo; Li, Danjie; Shimoda, Yukitoshi; Matsumoto, Hidetaka; Kishi, Shoji

2018-05-01

To describe the relationship between the vitreous and the neovascularization of the disc (NVD) using swept source optical coherence tomography (SS-OCT) and OCT angiography (OCTA). Retrospective. We examined 17 eyes of 11 consecutive patients diagnosed as NVD associated with proliferative diabetic retinopathy (PDR). The location of the NVD feeder or collector vessels were examined by using RTVue XR Avanti. To determine the condition of the posterior vitreous detachment (PVD) and the proliferative tissue of the NVD, we performed 12 mm horizontal and vertical scans through the disc using SS-OCT. OCT images of all 17 cases indicated there was no PVD on the optic disc. OCTA showed that the locations of the newly formed vessels from the optic disc were overwhelmingly outside the physiological cupping (95%). No cases exhibited formation of neovascularization inside the physiological cupping. OCT images revealed all 17 eyes had proliferative tissues located under the posterior wall of the vitreous, with 12 out of 17 eyes exhibiting additional invasion of the proliferative tissue into the vitreous through the posterior wall. Epiretinal membrane or a thickened posterior wall of the vitreous was present in 10 out of the 17 eyes. NVD associated with PDR arises from outside the physiological cupping and grows along the posterior wall of the vitreous. The absence of PVD on the optic disc is essential to the growth of NVD.

A Constructed Wetland: From Monitoring To Action.

ERIC Educational Resources Information Center

Kowal, Dan

1998-01-01

Presents a water-quality monitoring project in a Denver school that has evolved into an experiment using a constructed wetland system to treat the acid-mine drainage from an abandoned gold mine. (PVD)

Functional mechanism of lung mosaic CT attenuation: assessment with deep-inspiration breath-hold perfusion SPECT-CT fusion imaging and non-breath-hold Technegas SPECT.

PubMed

Suga, K; Yasuhiko, K; Iwanaga, H; Tokuda, O; Matsunaga, N

2009-01-01

The functional mechanism of lung mosaic computed tomography attenuation (MCA) in pulmonary vascular disease (PVD) and obstructive airway disease (OAD) has not yet been fully clarified. To clarify the mechanism of MCA in these diseases by assessing the relationship between regional lung function and CT attenuation change at MCA sites with the use of automated deep-inspiratory breath-hold (DIBrH) perfusion single-photon emission computed tomography (SPECT)-CT fusion images and non-breath-hold Technegas SPECT. Subjects were 42 PVD patients (31 pulmonary thromboembolism, four primary/two secondary pulmonary hypertension, and five Takayasu arteritis), 12 OAD patients (five acute asthma, four obliterative bronchiolitis, and three bronchiectasis), and 12 normal controls, all of whom had MCA on DIBrH CT. The relationship between regional lung function and CT attenuation change at the lung slices with MCA was assessed using DIBrH perfusion SPECT-CT fusion images and non-breath-hold Technegas SPECT. The severity of perfusion defects with or without MCA was quantified by regions-of-interest analysis. On DIBrH CT and perfusion SPECT, in contrast to no noticeable CT attenuation abnormality and fairly uniform perfusion in controls, 60 MCA and 274 perfusion defects in PVD patients, and 18 MCA and 61 defects in OAD patients were identified, with a total of 77 ventilation defects on Technegas SPECT in all patients. SPECT-CT correlation showed that, throughout the 78 MCA sites of all patients, lung perfusion was persistently decreased at low CT attenuation and preserved at intervening high CT attenuation, while lung ventilation was poorly correlated with CT attenuation change. The radioactivity ratios of reduced perfusion and the intervening preserved perfusion at the 78 perfusion defects with MCA were significantly lower than those at the remaining 257 defects without MCA (P<0.0001). Although further validation is required, our results indicate that heterogeneous pulmonary arterial

Systematic Review of the Effectiveness of Physical Therapy Modalities in Women With Provoked Vestibulodynia.

PubMed

Morin, Mélanie; Carroll, Marie-Soleil; Bergeron, Sophie

2017-07-01

Pelvic floor muscle physical therapy is recommended in clinical guidelines for women with provoked vestibulodynia (PVD). Including isolated or combined treatment modalities, physical therapy is viewed as an effective first-line intervention, yet no systematic review concerning the effectiveness of physical therapy has been conducted. To systematically appraise the current literature on the effectiveness of physical therapy modalities for decreasing pain during intercourse and improving sexual function in women with PVD. A systematic literature search using PubMed, Scopus, CINHAL, and PEDro was conducted until October 2016. Moreover, a manual search from reference lists of included articles was performed. Ongoing trials also were reviewed using clinicaltrial.gov and ISRCTNregistry. Randomized controlled trials, prospective and retrospective cohorts, and case reports evaluating the effect of isolated or combined physical therapy modalities in women with PVD were included in the review. Main outcome measures were pain during intercourse, sexual function, and patient's perceived improvement. The literature search resulted in 43 eligible studies including 7 randomized controlled trials, 20 prospective studies, 5 retrospective studies, 6 case reports, and 6 study protocols. Most studies had a high risk of bias mainly associated with the lack of a comparison group. Another common bias was related to insufficient sample size, non-validated outcomes, non-standardized intervention, and use of other ongoing treatment. The vast majority of studies showed that physical therapy modalities such as biofeedback, dilators, electrical stimulation, education, multimodal physical therapy, and multidisciplinary approaches were effective for decreasing pain during intercourse and improving sexual function. The positive findings for the effectiveness of physical therapy modalities in women with PVD should be investigated further in robust and well-designed randomized controlled trials

Regularly arranged indium islands on glass/molybdenum substrates upon femtosecond laser and physical vapor deposition processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ringleb, F.; Eylers, K.; Teubner, Th.

2016-03-14

A bottom-up approach is presented for the production of arrays of indium islands on a molybdenum layer on glass, which can serve as micro-sized precursors for indium compounds such as copper-indium-gallium-diselenide used in photovoltaics. Femtosecond laser ablation of glass and a subsequent deposition of a molybdenum film or direct laser processing of the molybdenum film both allow the preferential nucleation and growth of indium islands at the predefined locations in a following indium-based physical vapor deposition (PVD) process. A proper choice of laser and deposition parameters ensures the controlled growth of indium islands exclusively at the laser ablated spots. Basedmore » on a statistical analysis, these results are compared to the non-structured molybdenum surface, leading to randomly grown indium islands after PVD.« less

Structures of exocyclic R,R- and S,S-N(6),N(6)-(2,3-dihydroxybutan-1,4-diyl)-2'-deoxyadenosine adducts induced by 1,2,3,4-diepoxybutane.

PubMed

Kowal, Ewa A; Seneviratne, Uthpala; Wickramaratne, Susith; Doherty, Kathleen E; Cao, Xiangkun; Tretyakova, Natalia; Stone, Michael P

2014-05-19

1,3-Butadiene (BD) is an industrial and environmental chemical present in urban air and cigarette smoke, and is classified as a human carcinogen. It is oxidized by cytochrome P450 to form 1,2,3,4-diepoxybutane (DEB); DEB bis-alkylates the N(6) position of adenine in DNA. Two enantiomers of bis-N(6)-dA adducts of DEB have been identified: R,R-N(6),N(6)-(2,3-dihydroxybutan-1,4-diyl)-2'-deoxyadenosine (R,R-DHB-dA), and S,S-N(6),N(6)-(2,3-dihydroxybutan-1,4-diyl)-2'-deoxyadenosine (S,S-DHB-dA) [ Seneviratne , U. , Antsypovich , S. , Dorr , D. Q. , Dissanayake , T. , Kotapati , S. , and Tretyakova , N. ( 2010 ) Chem. Res. Toxicol. 23 , 1556 -1567 ]. Herein, the R,R-DHB-dA and S,S-DHB-dA adducts have been incorporated into the 5'-d(C(1)G(2)G(3)A(4)C(5)X(6)A(7)G(8)A(9)A(10)G(11))-3':5'-d(C(12)T(13)T(14)C(15)T(16)T(17)G(18)T(19)C(20)C(21)G(22))-3' duplex [X(6) = R,R-DHB-dA (R(6)) or S,S-DHB-dA (S(6))]. The structures of the duplexes were determined by molecular dynamics calculations, which were restrained by experimental distances obtained from NMR data. Both the R,R- and S,S-DHB-dA adducts are positioned in the major groove of DNA. In both instances, the bulky 3,4-dihydroxypyrrolidine rings are accommodated by an out-of-plane rotation about the C6-N(6) bond of the bis-alkylated adenine. In both instances, the directionality of the dihydroxypyrrolidine ring is evidenced by the pattern of NOEs between the 3,4-dihydroxypyrrolidine protons and DNA. Also in both instances, the anti conformation of the glycosyl bond is maintained, which combined with the out-of-plane rotation about the C6-N(6) bond, allows the complementary thymine, T(17), to remain stacked within the duplex, and form one hydrogen bond with the modified base, between the imine nitrogen of the modified base and the T(17) N3H imino proton. The loss of the second Watson-Crick hydrogen bonding interaction at the lesion sites correlates with the lower thermal stabilities of the R,R- and S,S-DHB-dA duplexes, as

Birthdays and the Binary System: A Magical Mixture.

ERIC Educational Resources Information Center

Karp, Karen S.; Ronau, Robert N.

1997-01-01

Presents an activity involving the use of students' birth dates. Activity includes a classic binary representation of numerical values. In the Green Machine, Sorting Cards, and Window Cards, students observe, describe, and analyze patterns. (PVD)

Evaluation of p53 Polymorphism in Patients with Pannus-Derived Prosthetic Dysfunction.

PubMed

Gursoy, Mustafa Ozan; Karakoyun, Suleyman; Kalcik, Macit; Yesin, Mahmut; Gunduz, Sabahattin; Astarcioğlu, Mehmet Ali; Oğuz, Ali Emrah; Ozkan, Mehmet

2015-09-01

Prosthetic valve dysfunction (PVD) due to pannus formation is considered to occur due to a bioreaction to prosthetic material. The p53 gene plays a critical role in apoptosis and cell proliferation. p53 Arg72Pro polymorphism has been found to be associated with coronary stent restenosis, but has not yet been studied in prosthetic heart valve dysfunction. The study aim was to evaluate the association between pannus-derived PVD and p53 G72C(Arg72Pro) polymorphism. This single-center, prospective study included 25 patients (20 females, five males; mean age 45.6 +/- 12.5 years; group 1) who underwent redo valve surgery due to PVD, and 49 age- and gender-matched control patients (44 females, five males; mean age 47.3 +/- 12.2 years; group 2) with normofunctional prostheses. The prostheses were examined using transthoracic and transesophageal echocardiography. Analyses of p53 G72C(Arg72Pro) polymorphism were performed using Roche LightCyler 2.0 Real-time polymerase chain reaction. The most common location of replaced valves was the mitral position in both groups (88% and 89.8%, respectively). In group 1, normal alleles (GG) were observed in 12 patients (48%), while one patient (4%) showed a homozygous mutation (GC) and 12 patients (48%) showed a heterozygous mutation (CC). In group 2, 21 patients (42.9%) had normal alleles (GG), while four (8.2%) had a homozygous mutation (CC) and 24 (48.9%) had a heterozygous mutation (GC). No significant difference was observed between the groups with regards to p53 Arg72Pro polymorphism (p = 0.769). In patients with prosthetic valves, the underlying mechanism behind pannus formation is unrelated to p53 Arg72Pro polymorphism.

Clinical Features of Psychogenic Voice Disorder and the Efficiency of Voice Therapy and Psychological Evaluation.

PubMed

Tezcaner, Zahide Çiler; Gökmen, Muhammed Fatih; Yıldırım, Sibel; Dursun, Gürsel

2017-11-06

The aim of this study was to define the clinical features of psychogenic voice disorder (PVD) and explore the treatment efficiency of voice therapy and psychological evaluation. Fifty-eight patients who received treatment following the PVD diagnosis and had no organic or other functional voice disorders were assessed retrospectively based on laryngoscopic examinations and subjective and objective assessments. Epidemiological characteristics, accompanying organic and psychological disorders, preferred methods of treatment, and previous treatment outcomes were examined for each patient. A comparison was made based on voice disorders and responses to treatment between patients who received psychotherapy and patients who did not. Participants in this study comprised 58 patients, 10 male and 48 female. Voice therapy was applied in all patients, 54 (93.1%) of whom had improvement in their voice. Although all patients were advised to undergo psychological assessment, only 60.3% (35/58) of them underwent psychological assessment. No statistically significant difference was found between patients who did receive psychological support concerning their treatment responses and patients who did not. Relapse occurred in 14.7% (5/34) of the patients who applied for psychological assessment and in 50% (10/20) of those who did not. There was a statistically significant difference in relapse rates, which was higher among patients who did not receive psychological support (P < 0.005). Voice therapy is an efficient treatment method for PVD. However, in the long-term follow-up, relapse of the disease is observed to be higher among patients who failed to follow up on the recommendation for psychological assessment. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Structures of Exocyclic R,R- and S,S-N6,N6-(2,3-Dihydroxybutan-1,4-diyl)-2′-Deoxyadenosine Adducts Induced by 1,2,3,4-Diepoxybutane

PubMed Central

2015-01-01

1,3-Butadiene (BD) is an industrial and environmental chemical present in urban air and cigarette smoke, and is classified as a human carcinogen. It is oxidized by cytochrome P450 to form 1,2,3,4-diepoxybutane (DEB); DEB bis-alkylates the N6 position of adenine in DNA. Two enantiomers of bis-N6-dA adducts of DEB have been identified: R,R-N6,N6-(2,3-dihydroxybutan-1,4-diyl)-2′-deoxyadenosine (R,R-DHB-dA), and S,S-N6,N6-(2,3-dihydroxybutan-1,4-diyl)-2′-deoxyadenosine (S,S-DHB-dA) [SeneviratneU., AntsypovichS., DorrD. Q., DissanayakeT., KotapatiS., and TretyakovaN. (2010) Chem. Res. Toxicol.23, 1556−156720873715]. Herein, the R,R-DHB-dA and S,S-DHB-dA adducts have been incorporated into the 5′-d(C1G2G3A4C5X6A7G8A9A10G11)-3′:5′-d(C12T13T14C15T16T17G18T19C20C21G22)-3′ duplex [X6 = R,R-DHB-dA (R6) or S,S-DHB-dA (S6)]. The structures of the duplexes were determined by molecular dynamics calculations, which were restrained by experimental distances obtained from NMR data. Both the R,R- and S,S-DHB-dA adducts are positioned in the major groove of DNA. In both instances, the bulky 3,4-dihydroxypyrrolidine rings are accommodated by an out-of-plane rotation about the C6-N6 bond of the bis-alkylated adenine. In both instances, the directionality of the dihydroxypyrrolidine ring is evidenced by the pattern of NOEs between the 3,4-dihydroxypyrrolidine protons and DNA. Also in both instances, the anti conformation of the glycosyl bond is maintained, which combined with the out-of-plane rotation about the C6-N6 bond, allows the complementary thymine, T17, to remain stacked within the duplex, and form one hydrogen bond with the modified base, between the imine nitrogen of the modified base and the T17 N3H imino proton. The loss of the second Watson–Crick hydrogen bonding interaction at the lesion sites correlates with the lower thermal stabilities of the R,R- and S,S-DHB-dA duplexes, as compared to the corresponding unmodified duplex. The reduced base stacking at the

Lemon Cells Revisited--The Lemon-Powered Calculator.

ERIC Educational Resources Information Center

Swartling, Daniel J.; Morgan, Charlotte

1998-01-01

Describes a demonstration of the principles of a voltaic cell using lemon cells to power a calculator and other items. A lemon fortified with a penny and a galvanized nail produces a potential of one volt. (PVD)

An experimental study of solid source diffusion by spin on dopants and its application for minimal silicon-on-insulator CMOS fabrication

NASA Astrophysics Data System (ADS)

Liu, Yongxun; Koga, Kazuhiro; Khumpuang, Sommawan; Nagao, Masayoshi; Matsukawa, Takashi; Hara, Shiro

2017-06-01

Solid source diffusions of phosphorus (P) and boron (B) into the half-inch (12.5 mm) minimal silicon (Si) wafers by spin on dopants (SOD) have been systematically investigated and the physical-vapor-deposited (PVD) titanium nitride (TiN) metal gate minimal silicon-on-insulator (SOI) complementary metal-oxide-semiconductor (CMOS) field-effect transistors (FETs) have successfully been fabricated using the developed SOD thermal diffusion technique. It was experimentally confirmed that a low temperature oxidation (LTO) process which depresses a boron silicide layer formation is effective way to remove boron-glass in a diluted hydrofluoric acid (DHF) solution. It was also found that top Si layer thickness of SOI wafers is reduced in the SOD thermal diffusion process because of its consumption by thermal oxidation owing to the oxygen atoms included in SOD films, which should be carefully considered in the ultrathin SOI device fabrication. Moreover, normal operations of the fabricated minimal PVD-TiN metal gate SOI-CMOS inverters, static random access memory (SRAM) cells and ring oscillators have been demonstrated. These circuit level results indicate that no remarkable particles and interface traps were introduced onto the minimal wafers during the device fabrication, and the developed solid source diffusion by SOD is useful for the fabrication of functional logic gate minimal SOI-CMOS integrated circuits.

Multicore-shell nanofiber architecture of polyimide/polyvinylidene fluoride blend for thermal and long-term stability of lithium ion battery separator.

PubMed

Park, Sejoon; Son, Chung Woo; Lee, Sungho; Kim, Dong Young; Park, Cheolmin; Eom, Kwang Sup; Fuller, Thomas F; Joh, Han-Ik; Jo, Seong Mu

2016-11-11

Li-ion battery, separator, multicoreshell structure, thermal stability, long-term stability. A nanofibrous membrane with multiple cores of polyimide (PI) in the shell of polyvinylidene fluoride (PVdF) was prepared using a facile one-pot electrospinning technique with a single nozzle. Unique multicore-shell (MCS) structure of the electrospun composite fibers was obtained, which resulted from electrospinning a phase-separated polymer composite solution. Multiple PI core fibrils with high molecular orientation were well-embedded across the cross-section and contributed remarkable thermal stabilities to the MCS membrane. Thus, no outbreaks were found in its dimension and ionic resistance up to 200 and 250 °C, respectively. Moreover, the MCS membrane (at ~200 °C), as a lithium ion battery (LIB) separator, showed superior thermal and electrochemical stabilities compared with a widely used commercial separator (~120 °C). The average capacity decay rate of LIB for 500 cycles was calculated to be approximately 0.030 mAh/g/cycle. This value demonstrated exceptional long-term stability compared with commercial LIBs and with two other types (single core-shell and co-electrospun separators incorporating with functionalized TiO 2 ) of PI/PVdF composite separators. The proper architecture and synergy effects of multiple PI nanofibrils as a thermally stable polymer in the PVdF shell as electrolyte compatible polymers are responsible for the superior thermal performance and long-term stability of the LIB.

Multicore-shell nanofiber architecture of polyimide/polyvinylidene fluoride blend for thermal and long-term stability of lithium ion battery separator

PubMed Central

Park, Sejoon; Son, Chung Woo; Lee, Sungho; Kim, Dong Young; Park, Cheolmin; Eom, Kwang Sup; Fuller, Thomas F.; Joh, Han-Ik; Jo, Seong Mu

2016-01-01

Li-ion battery, separator, multicoreshell structure, thermal stability, long-term stability. A nanofibrous membrane with multiple cores of polyimide (PI) in the shell of polyvinylidene fluoride (PVdF) was prepared using a facile one-pot electrospinning technique with a single nozzle. Unique multicore-shell (MCS) structure of the electrospun composite fibers was obtained, which resulted from electrospinning a phase-separated polymer composite solution. Multiple PI core fibrils with high molecular orientation were well-embedded across the cross-section and contributed remarkable thermal stabilities to the MCS membrane. Thus, no outbreaks were found in its dimension and ionic resistance up to 200 and 250 °C, respectively. Moreover, the MCS membrane (at ~200 °C), as a lithium ion battery (LIB) separator, showed superior thermal and electrochemical stabilities compared with a widely used commercial separator (~120 °C). The average capacity decay rate of LIB for 500 cycles was calculated to be approximately 0.030 mAh/g/cycle. This value demonstrated exceptional long-term stability compared with commercial LIBs and with two other types (single core-shell and co-electrospun separators incorporating with functionalized TiO2) of PI/PVdF composite separators. The proper architecture and synergy effects of multiple PI nanofibrils as a thermally stable polymer in the PVdF shell as electrolyte compatible polymers are responsible for the superior thermal performance and long-term stability of the LIB. PMID:27833132

Evaluation of wick drain performance in Virginia soils.

DOT National Transportation Integrated Search

2003-01-01

Prefabricated vertical drains (PVD), also known as wick drains, are commonly used to accelerate the consolidation of fine-grained soils in order to reduce future settlements and increase shear strength. Various drain designs are currently on the mark...

Deformation mechanism of CrN/nitriding coated steel in wear and nano-scratch experiments under heavy loading conditions

NASA Astrophysics Data System (ADS)

Wang, Yongguang; Chen, Yao; Zhao, Dong; Lu, Xiaolong; Liu, Weiwei; Qi, Fei; Chen, Yang

2018-07-01

CrN coatings are widely used to protect metals from wear in industrial engineering. However, fundamental deformation mechanism of these coatings under heavy loading conditions remains elusive. In this paper, multilayered hard coatings with a CrN matrix and a supporting layer were developed by means of the hybrid deposition process combined with PVD and ionicnitriding. The tribological behavior of coatings with and without ionicnitriding were investigated by a pin-on-disk arrangement under heavy loading conditions. In addition, the deformation mechanism of the multilayered hard coatings was studied by nano-scratch experiment with ramp load model, which has not been discussed previously. It was found that the deformation process of coatings could be divided into three regimes based on the evolution of frictional coefficient. The insertion of nitriding films leads to the further increase in frictional resistance owing to the elastic-plastic deformation. The results and analysis reveal some insights into the coating design for multilayered hard coatings with the consideration of deformation mechanisms.

Nucleation and growth of microdroplets of ionic liquids deposited by physical vapor method onto different surfaces

NASA Astrophysics Data System (ADS)

Costa, José C. S.; Coelho, Ana F. S. M. G.; Mendes, Adélio; Santos, Luís M. N. B. F.

2018-01-01

Nanoscience and technology has generated an important area of research in the field of properties and functionality of ionic liquids (ILs) based materials and their thin films. This work explores the deposition process of ILs droplets as precursors for the fabrication of thin films, by means of physical vapor deposition (PVD). It was found that the deposition (by PVD on glass, indium tin oxide, graphene/nickel and gold-coated quartz crystal surfaces) of imidazolium [C4mim][NTf2] and pyrrolidinium [C4C1Pyrr][NTf2] based ILs generates micro/nanodroplets with a shape, size distribution and surface coverage that could be controlled by the evaporation flow rate and deposition time. No indication of the formation of a wetting-layer prior to the island growth was found. Based on the time-dependent morphological analysis of the micro/nanodroplets, a simple model for the description of the nucleation process and growth of ILs droplets is presented. The proposed model is based on three main steps: minimum free area to promote nucleation; first order coalescence; second order coalescence.

Composite polymer electrolyte based on PEO/Pvdf-HFP with MWCNT for lithium battery applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pradeepa, P.; Edwinraj, S.; Sowmya, G.

In the present study PEO and PVdF-HFP blend based composite polymer electrolytes (CPEs) has been prepared by using Multi Walled Carbon Nanotube (MWCNT), in order to examine the filler addition effect on the electrochemical properties. The complexed nanocomposite polymer electrolytes were obtained in the form of dimensionally stable and free standing films by using solution casting technique. The electrochemical properties of CPEs were measured by the AC impedance method. From the ionic conductivity results, the CPE containing MWCNT 2wt% showed the highest ionic conductivity with an excellent thermal stability at room temperature. The dielectric loss curve s for the samplemore » 6.25wt% PEO: 18.75 wt% PVdF-HFP: 2wt% MWCNT reveal the low frequency β relaxation peak pronounced at high temperature, and it may caused by side group dipoles.« less

Influence of Surface Finishing on the Oxidation Behaviour of VPS MCrAlY Coatings

NASA Astrophysics Data System (ADS)

Fossati, Alessio; di Ferdinando, Martina; Bardi, Ugo; Scrivani, Andrea; Giolli, Carlo

2012-03-01

CoNiCrAlY coatings were produced by means of the vacuum plasma spraying (VPS) process onto CMSX-4 single crystal nickel superalloy disk substrates. As-sprayed samples were annealed at high temperatures in low vacuum. Three kinds of finishing processes were carried out, producing three types of samples: as-sprayed, mechanically smoothed by grinding, ground and PVD coated by using aluminum targets in an oxygen atmosphere. Samples were tested under isothermal conditions, in air, at 1000 °C, and up to 5000 h. Morphological, microstructural and compositional analyses were performed on the coated samples in order to assess the high temperature oxidation behavior provided by the three different surface finishing processes. Several differences were observed: grinding operations decrease the oxidation resistance, whereas the PVD process can increase the performances over longer time with respect of the as-sprayed samples.

Determining Iron Content in Foods by Spectrophotometry.

ERIC Educational Resources Information Center

Adams, Paul E.

1995-01-01

Describes a laboratory experiment for secondary school chemistry students utilizing the classic reaction between the iron(III) ion and the thiocyanate ion. The experiment also works very well in other chemistry courses as an experience in spectrophotometric analysis. (PVD)

Circulating levels of miR-150 are associated with poorer outcomes of A/H1N1 infection.

PubMed

Morán, Juan; Ramírez-Martínez, Gustavo; Jiménez-Alvarez, Luis; Cruz, Alfredo; Pérez-Patrigeon, Santiago; Hidalgo, Alfredo; Orozco, Lorena; Martínez, Angélica; Padilla-Noriega, Luis; Avila-Moreno, Federico; Cabello, Carlos; Granados, Julio; Ortíz-Quintero, Blanca; Ramírez-Venegas, Alejandra; Ruíz-Palacios, Guillermo M; Zlotnik, Albert; Merino, Enrique; Zúñiga, Joaquín

2015-10-01

Overproduction of pro-inflammatory cytokines and chemokines is frequently associated with severe clinical manifestations in patients infected with influenza A/H1N1 virus. Micro-RNAs (miRNAs) are highly conserved small non-coding RNA molecules that post-transcriptionally regulate gene expression and are potential biomarkers and therapeutic targets in different inflammatory conditions. We studied the circulating and miRNA profiles in critically ill A/H1N1 patients, A/H1N1 patients with milder disease, asymptomatic housemates and healthy controls. Cytokine, chemokine and growth factors that were potential targets of differentially expressed miRNAs were assessed. Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment and interactome analysis of these miRNAs were also performed. Critically ill patients exhibited a significant over-expression of circulating miR-150 (p<0.005) when compared to patients with milder disease. miR-29c, miR-145 and miR-22 were differentially expressed in patients with severe A/H1N1 disease whereas miR-210, miR-126 and miR-222 were downregulated in individuals exposed to the A/H1N1 virus. Significant correlations (p<0.05) between circulating levels of miR-150 with IL-1ra, IL-2, IL-6, CXCL8, IFN-γ, CXCL10 and G-CSF were detected, particularly in critically ill patients. The up-regulation of miR-150 is associated with poorer outcomes of A/H1N1 infection. The differential expression of miRNAs related with immune processes in severe A/H1N1 disease supports the potential role of these miRNAs as biomarkers of disease progression. Copyright © 2015 Elsevier Inc. All rights reserved.

Local metric dimension of circulant graph c i r c (n :1 ,2 ,…,n/+1 2 )

NASA Astrophysics Data System (ADS)

Rimadhany, Ruzika; Darmaji

2017-08-01

Let G be a connected graph with two vertices u and v. The distance between u and v, denoted by d(u, v), is defined as length of the shortest path from u to v in G. For an ordered set W = {w1, w2, w3, … , wk} of k distinct vertices in a nontrivial connected graph G, the representation of a vertex v of V(G) respect to W is r(v|W) = (d(v, w1), d(v, w2), … , d(v, wk)). The set W is a resolving set of G if r(v|W) for each vertex v ∈ V(G) is distinct. A resolving set of minimum cardinality is a metric dimension and denoted by dim(G). The set W is a local resolving set of G if r(v|W) for every two adjacent vertices of V(G) is distinct. The minimum cardinality of local resolving set of G is a local metric dimension and denoted by ldim(G). In this research, we determine local metric dimension of circulant graph c i r c (n :1 ,2 ,3 ,…,n/+1 2 ) .

TIA, stroke and orthostatic hypotension: a disease spectrum related to ageing vasculature?

PubMed

Kwok, C S; Ong, A C L; Potter, J F; Metcalf, A K; Myint, P K

2014-06-01

We sought to identify the determinants of orthostatic hypotension (OH) among patients referred to the transient ischaemic attack (TIA) clinic. We conducted a retrospective analysis of prospectively collected data on patients who attended the TIA clinic in a UK hospital between January 2006 and September 2009. Each patient had their supine and standing or sitting blood pressure measured. Logistic regression was used to estimate the univariate and multivariate odds of OH for the subgroups of patients based on their diagnosis. A 10% significance level for the univariate analysis was used to identify variables in the multivariate model. A total of 3222 patients were studied of whom 1131 had a TIA, 665 a stroke and 1426 had other diagnoses. The prevalence of either systolic or diastolic OH in the TIA, stroke and patients with other diagnoses was similar being 22% (n = 251), 24% (n = 162) and 20% (n = 292), respectively. Multivariate analyses showed age, prior history of TIA, and diabetes were independently significantly associated with systolic OH alone or diastolic OH alone or either systolic or diastolic OH [ORs 1.03 (1.02-1.05); 1.56 (1.05-2.31); 1.65 (1.10-2.47), respectively]. Among the patients with the diagnosis of stroke, peripheral vascular disease (PVD) was significantly associated with increased odds of OH (3.56, 1.53-8.31), whereas male gender had a significantly lower odds of OH (0.61, 0.42-0.88). In patients with other diagnoses, age (1.04, 1.02-1.05) and diabetes (1.47, 1.04-2.09) were associated with OH, whereas male gender was (0.76, 0.58-1.00) not associated with OH. Orthostatic hypotension is prevalent among patients presenting to TIA clinic. Previous history of vascular disease (prior TIA/stroke/PVD) appears to be a significant associate of OH in this patient population. © 2014 John Wiley & Sons Ltd.

PHYSICAL VAPOR DEPOSITION OF TANTALUM ON GUN BARREL STEEL (SYSTEMS ANLAYSIS BRANCH, SUSTAINABLE TECHNOLOGY DIVISION, NRMRL)

EPA Science Inventory

This project entails the development of an alternative technology for plating gun barrel steel to replace the process electroplating of chrome (Cr-electroplate) with physical vapor deposition of tantalum (Ta-PVD). Developed by Benet Laboratory at Watervliet Arsenal, this project'...

Adhesion Strength of TiN Coatings at Various Ion Etching Deposited on Tool Steels Using Cathodic Arc Pvd Technique

NASA Astrophysics Data System (ADS)

Ali, Mubarak; Hamzah, Esah; Ali, Nouman

Titanium nitride (TiN) widely used as hard coating material was coated on tool steels, namely on high-speed steel (HSS) and D2 tool steel by physical vapor deposition method. The goal of this study was to examine the effect of ion etching with and without titanium (Ti) and chromium (Cr) on the adhesion strength of TiN coatings deposited on tool steels. From the scratch tester, it was observed that by increasing Ti ion etching showed an increase in adhesion strength of the deposited coatings. The coatings deposited with Cr ion etching showed poor adhesion compared with the coatings deposited with Ti ion etching. Scratch test measurements showed that the coating deposited with titanium ion etching for 16 min is the most stable coating and maintained even at the critical load of 66 N. The curve obtained via penetration depth along the scratch trace is linear in the case of HSS, whereas is slightly flexible in the case of D2 tool steel. The coatings deposited on HSS exhibit better adhesion compared with those on D2 tool steel.

On N = 1 partition functions without R-symmetry

DOE PAGES

Knodel, Gino; Liu, James T.; Zayas, Leopoldo A. Pando

2015-03-25

Here, we examine the dependence of four-dimensional Euclidean N = 1 partition functions on coupling constants. In particular, we focus on backgrounds without R-symmetry, which arise in the rigid limit of old minimal supergravity. Backgrounds preserving a single supercharge may be classified as having either trivial or SU(2) structure, with the former including S 4. We show that, in the absence of additional symmetries, the partition function depends non-trivially on all couplings in the trivial structure case, and (anti)-holomorphically on couplings in the SU(2) structure case. In both cases, this allows for ambiguities in the form of finite counterterms, whichmore » in principle render the partition function unphysical. However, we argue that on dimensional grounds, ambiguities are restricted to finite powers in relevant couplings, and can therefore be kept under control. On the other hand, for backgrounds preserving supercharges of opposite chiralities, the partition function is completely independent of all couplings. In this case, the background admits an R-symmetry, and the partition function is physical, in agreement with the results obtained in the rigid limit of new minimal supergravity. Based on a systematic analysis of supersymmetric invariants, we also demonstrate that N = 1 localization is not possible for backgrounds without R-symmetry.« less

Toward better Li-ion batteries: hard x-ray photoelectron spectroscopy investigation of binder materials for Si-based anodes

NASA Astrophysics Data System (ADS)

Young, Benjamin; Heskett, David; Nguyen, Cao Cuong; Woicik, Joseph; Lucht, Brett

From portable electronics to space exploration, the desire for more capable rechargeable batteries is driving a search for high capacity anodes. There is much interest in incorporating silicon as a partial or full replacement for the current graphite material in the most popular batteries because it could potentially hold much more charge. There is a significant challenge, however, in that storing so much more lithium in either electrode as the battery is charged and discharged as this causes an accompanying increase in the physical size fluctuation of the electrodes. Specifically, in the anode where this investigation focuses, the active material may experience a 300% volume change between the charged and discharged state. This makes a long lifetime difficult to achieve because the passivation layer protecting the electrolyte material from decomposition is compromised upon each cycle. One approach to accommodating the large volumetric fluctuation without sacrificing lifetime is to find a better material to include in the anode substrate to act as a binder. Ideally, such a material would permit the anode to fluctuate without breaking. Polyvinylidene fluoride (PVdF) is not successful for silicon-based anodes and we present Hard X-ray photoelectron spectroscopy studies of batteries incorporating three alternatives. The alternative binders outperform the PVdF and we present possible explanations. DOE EPSCoR and RI College Faculty Research Fund.

Sus scrofa miR-204 and miR-4331 Negatively Regulate Swine H1N1/2009 Influenza A Virus Replication by Targeting Viral HA and NS, Respectively.

PubMed

Zhang, Shishuo; Wang, Ruifang; Su, Huijuan; Wang, Biaoxiong; Sizhu, Suolang; Lei, Zhixin; Jin, Meilin; Chen, Huanchun; Cao, Jiyue; Zhou, Hongbo

2017-04-03

The prevalence of swine pandemic H1N1/2009 influenza A virus (SIV-H1N1/2009) in pigs has the potential to generate novel reassortant viruses, posing a great threat to human health. Cellular microRNAs (miRNAs) have been proven as promising small molecules for regulating influenza A virus replication by directly targeting viral genomic RNA. In this study, we predicted potential Sus scrofa (ssc-, swine) miRNAs targeting the genomic RNA of SIV-H1N1/2009 by RegRNA 2.0, and identified ssc-miR-204 and ssc-miR-4331 to target viral HA and NS respectively through dual-luciferase reporter assays. The messenger RNA (mRNA) levels of viral HA and NS were significantly suppressed when newborn pig trachea (NPTr) cells respectively overexpressed ssc-miR-204 and ssc-miR-4331 and were infected with SIV-H1N1/2009, whereas the suppression effect could be restored when respectively decreasing endogenous ssc-miR-204 and ssc-miR-4331 with inhibitors. Because of the importance of viral HA and NS in the life cycle of influenza A virus, ssc-miR-204 and ssc-miR-4331 exhibited an inhibition effect on SIV-H1N1/2009 replication. The antiviral effect was sequence-specific of SIV-H1N1/2009, for the target sites in HA and NS of H5N1 or H9N2 influenza A virus were not conserved. Furthermore, SIV-H1N1/2009 infection reversely downregulated the expression of ssc-miR-204 and ssc-miR-4331, which might facilitate the virus replication in the host. In summary, this work will provide us some important clues for controlling the prevalence of SIV-H1N1/2009 in pig populations.

Diagnostic value of Doppler assessment of the hepatic and portal vessels and ultrasound of the spleen in liver disease.

PubMed

O'Donohue, John; Ng, Chaan; Catnach, Susan; Farrant, Patricia; Williams, Roger

2004-02-01

To investigate the clinical utility and the intra-observer and inter-observer variability of Doppler ultrasound assessment of the hepatic and portal vessels along with measurement of spleen size in the diagnosis of chronic liver disease and cirrhosis. Ultrasound measurements of portal vein diameter (PVD), portal vein velocity (PVV), hepatic arterial resistance index (HARI), hepatic vein profile (HVP), and spleen size were obtained in 49 controls and 45 patients with liver disease (23 with primary biliary cirrhosis, 22 with hepatitis C) by two experienced observers, who each performed three blinded measurements of each variable. Control values were derived from normal hospital workers. Percutaneous liver biopsies in 41 of the patients showed cirrhosis (14 patients), moderate/severe fibrosis (13 patients), and early disease (14 patients). Seventy-one percent of cirrhotic patients had splenomegaly (> 13.6 cm). The spleen size was significantly larger in cirrhotics (16.0 cm) than in non-cirrhotics (13.0 cm, P < 0.009) and healthy controls (10.7 cm, P < 0.00005), and was the only independent predictor of cirrhosis, with a threshold of 15 cm predicting cirrhosis with a specificity of 98%, positive predictive value of 93%, sensitivity of 57% and negative predictive value of 80%. HVP was abnormal in 76.9% of cirrhotics, 57.7% of non-cirrhotics and 2.1% of controls (P < 0.04). However, the mean PVV, PVD and HARI were no different between controls and patients or between cirrhotic and non-cirrhotic liver disease. There was significant inter-observer variability for PVV, but intra-observer and inter-observer variability was acceptable for the other measurements. Splenomegaly size and abnormal HVP are useful predictors of chronic liver disease and cirrhosis, and both can be measured reliably and reproducibly. However, Doppler measurements of PVV, PVD and HARI are not useful in distinguishing patients with chronic liver disease from normal controls.

Studies on the surface modification of TiN coatings using MEVVA ion implantation with selected metallic species

NASA Astrophysics Data System (ADS)

Ward, L. P.; Purushotham, K. P.; Manory, R. R.

2016-02-01

Improvement in the performance of TiN coatings can be achieved using surface modification techniques such as ion implantation. In the present study, physical vapor deposited (PVD) TiN coatings were implanted with Cr, Zr, Nb, Mo and W using the metal evaporation vacuum arc (MEVVA) technique at a constant nominal dose of 4 × 1016 ions cm-2 for all species. The samples were characterized before and after implantation, using Rutherford backscattering (RBS), glancing incident angle X-ray diffraction (GIXRD), atomic force microscopy (AFM) and optical microscopy. Friction and wear studies were performed under dry sliding conditions using a pin-on-disc CSEM Tribometer at 1 N load and 450 m sliding distance. A reduction in the grain size and surface roughness was observed after implantation with all five species. Little variation was observed in the residual stress values for all implanted TiN coatings, except for W implanted TiN which showed a pronounced increase in compressive residual stress. Mo-implanted samples showed a lower coefficient of friction and higher resistance to breakdown during the initial stages of testing than as-received samples. Significant reduction in wear rate was observed after implanting with Zr and Mo ions compared with unimplanted TiN. The presence of the Ti2N phase was observed with Cr implantation.

A new material platform of Si photonics for implementing architecture of dense wavelength division multiplexing on Si bulk wafer

NASA Astrophysics Data System (ADS)

Zhang, Ziyi; Yako, Motoki; Ju, Kan; Kawai, Naoyuki; Chaisakul, Papichaya; Tsuchizawa, Tai; Hikita, Makoto; Yamada, Koji; Ishikawa, Yasuhiko; Wada, Kazumi

2017-12-01

A new materials group to implement dense wavelength division multiplexing (DWDM) in Si photonics is proposed. A large thermo-optic (TO) coefficient of Si malfunctions multiplexer/demultiplexer (MUX/DEMUX) on a chip under thermal fluctuation, and thus DWDM implementation, has been one of the most challenging targets in Si photonics. The present study specifies an optical materials group for DWDM by a systematic survey of their TO coefficients and refractive indices. The group is classified as mid-index contrast optics (MiDex) materials, and non-stoichiometric silicon nitride (SiNx) is chosen to demonstrate its significant thermal stability. The TO coefficient of non-stoichiometric SiNx is precisely measured in the temperature range 24-76 °C using the SiNx rings prepared by two methods: chemical vapor deposition (CVD) and physical vapor deposition (PVD). The CVD-SiNx ring reveals nearly the same TO coefficient reported for stoichiometric CVD-Si3N4, while the value for the PVD-SiNx ring is slightly higher. Both SiNx rings lock their resonance frequencies within 100 GHz in this temperature range. Since CVD-SiNx needs a high temperature annealing to reduce N-H bond absorption, it is concluded that PVD-SiNx is suited as a MiDex material introduced in the CMOS back-end-of-line. Further stabilization is required, considering the crosstalk between two channels; a 'silicone' polymer is employed to compensate for the temperature fluctuation using its negative TO coefficient, called athermalization. This demonstrates that the resonance of these SiNx rings is locked within 50 GHz at the same temperature range in the wavelength range 1460-1620 nm (the so-called S, C, and L bands in optical fiber communication networks). A further survey on the MiDex materials strongly suggests that Al2O3, Ga2O3 Ta2O5, HfO2 and their alloys should provide even more stable platforms for DWDM implementation in MiDex photonics. It is discussed that the MiDex photonics will find various applications

A prospective 2-year examination of cognitive and behavioral correlates of provoked vestibulodynia outcomes.

PubMed

Davis, Seth N P; Bergeron, Sophie; Bois, Katy; Sadikaj, Gentiana; Binik, Yitzchak M; Steben, Marc

2015-04-01

Provoked vestibulodynia (PVD) is a common genital pain disorder in women that is associated with sexual dysfunction and lowered sexual satisfaction. A potentially applicable cognitive-behavioral model of chronic pain and disability is the fear-avoidance model (FAM) of pain. The FAM posits that cognitive variables, such as pain catastrophizing, fear, and anxiety lead to avoidance of pain-provoking behaviors (eg, intercourse), resulting in continued pain and disability. Although some of the FAM variables have been shown to be associated with PVD pain and sexuality outcomes, the model as a whole has never been tested in this population. An additional protective factor, pain self-efficacy (SE), is also associated with PVD, but has not been tested within the FAM model. Using a 2-year longitudinal design, we examine (1) whether initial levels (T1) of the independent FAM variables and pain SE were associated with changes in pain, sexual function, and sexual satisfaction over the 2-year time period; (2) the prospective contribution of changes in cognitive-affective (FAM) variables to changes in pain, and sexuality outcomes; and (3) whether these were mediated by behavioral change (avoidance of intercourse). A sample of 222 women with PVD completed self-report measures of FAM variables, SE, pain, sexual function, and sexual satisfaction at time 1 and at a 2-year follow-up. Structural equation modeling with Latent Difference Scores was used to examine changes and to examine mediation between variables. Questionnaires included the Pain Catastrophizing Scale, McGill Pain Questionnaire, Trait Anxiety Inventory, Pain Self-Efficacy Scale, and Global Measure of Sexual Satisfaction, Female Sexual Function Index. Participants who reported higher SE at T1 reported greater declines in pain, greater increases in sexual satisfaction, and greater declines in sexual function over the 2 time points. The overall change model did not support the FAM using negative cognitive

Physical vapor deposition as a route to glasses with liquid crystalline order

NASA Astrophysics Data System (ADS)

Gomez, Jaritza

Physical vapor deposition (PVD) is an effective route to prepare glasses with a unique combination of properties. Substrate temperatures near the glass transition (Tg) and slow deposition rates can access enhanced mobility at the surface of the glass allowing molecules at the surface additional time to sample different molecular configurations. The temperature of the substrate can be used to control molecular mobility during deposition and properties in the resulting glasses such as higher density, kinetic stability and preferential molecular orientation. PVD was used to prepare glasses of itraconazole, a smectic A liquid crystal. We characterized molecular orientation using infrared and ellipsometry. Molecular orientation can be controlled by choice of Tsubstrate in a range of temperatures near Tg. Glasses deposited at Tsubstrate = Tg show nearly vertical molecular orientation relative to the substrate; at lower Tsubstrate, molecules are nearly parallel to the substrate. The molecular orientation depends on the temperature of the substrate during preparation and not on the molecular orientation of the underlying layer. This allows preparing samples of layers with differing orientations. We find these glasses are homogeneous solids without evidence of domain boundaries and are molecularly flat. We interpret the combination of properties obtained for vapor-deposited glasses of itraconazole to result from a process where molecular orientation is determined by the structure and dynamics at the free surface of the glass during deposition. We report the thermal and structural properties of glasses prepared using PVD of a rod-like molecule, posaconazole, which does not show equilibrium liquid crystal phases. These glasses show substantial molecular orientation that can be controlled by choice of Tsubstrate during deposition. Ellipsometry and IR indicate that glasses prepared at Tg - 3 K are highly ordered. At these Tsubstrate, molecules show preferential vertical

Treatment of Provoked Vulvodynia in a Swedish cohort using desensitization exercises and cognitive behavioral therapy.

PubMed

Lindström, Suzanne; Kvist, Linda J

2015-11-25

Problems related to pain during vaginal penetration are complex and the etiology is multi-factorial. It was the aim of the present study to measure whether treatment using desensitization exercises and cognitive behavioral therapy (CBT) for women with provoked vulvodynia (PVD) could increase sexual interest, sexual satisfaction and response whilst decreasing experiences of sexual pain. Sixty women suffering from PVD were treated during a 10-week period with a combination of mucosal desensitization and pelvic floor exercises and CBT. The McCoy Female Sexuality Questionnaire (MFSQ) was used to measure efficacy of the treatment. The Hospital Anxiety and Depression Scale (HADS) was used to measure psychological distress. The primary outcome measurements were changes in scores for the MFSQ and changes in individual items on the MFSQ directly after treatment completion. Secondary outcome measurements were changes in the MFSQ items 6 months after treatment and changes in HADS sub-scales 6 months after treatment. Statistical comparisons of answers to the MFSQ were carried out using the Wilcoxon signed rank test (paired). Validity of the MFSQ in this study was measured by testing one global question about sexuality and total scores on MFSQ using Spearman's correlation test. Study participants reported a statistically significant increase in sexual fantasies, increased sexual pleasure, excitement and vaginal lubrication after treatment was completed. PVD occurred less often which resulted in significantly less avoidance of sexual intercourse, increased frequency of masturbation and intercourse. All improvements were sustained at 6 months after treatment ended. Two questions showed no significant changes, these pertained to the individual's contentment with her partner as a lover and a friend. The anxiety sub-scale of the HADS showed a significantly decreased level of anxiety at 6 months follow-up but no change in the scores on the depression sub-scale. Treatment for PVD

Validation of HVOF Thermal Spray Coatings as a Replacement for Hard Chrome Plating on Hydraulic/Pneumatic Actuators

DTIC Science & Technology

2007-12-01

Projects Agency (DARPA). The program evaluated HVOF, physical vapor deposition (PVD) and laser cladding , and concluded that HVOF was the best overall...components such as titanium flap tracks. 5 2.0 TECHNOLOGY DESCRIPTION 2.1 TECHNOLOGY DEVELOPMENT AND APPLICATION Technology background and...theory of operation: High-velocity oxygen-fuel (HVOF) is a standard commercial thermal spray process in which a powder of the material to be sprayed

Optical and contact nondestructive measurement of the laser remelting layers

NASA Astrophysics Data System (ADS)

Chmelíčková, Hana; Lapšanská, Hana; Hiklová, Helena; Havelková, Martina; Medlín, Rostislav; Beneš, Petr

2007-06-01

Laser beam of the infrared pulsed Nd:YAG laser was used to re-melting PVD coatings on the steel substrates. Chemical composition of these layers contains carbide Cr 3C II with alloy NiCr or nitrides TiN, TiAlN, TiAlSiN and CrAlSiN. First coatings were prepared by method of high velocity oxygen fuel (HVOF) that protects the machine component surfaces from abrasion, corrosion or ensures thermal isolation, nitrides by PVD (Physical Vapor Deposition). Processing parameters such as pulse energy, pulse length and frequency were optimized in many experiments to achieve the sufficient surface energy density to melting without vaporization of the material. Multimode beam diameters about some millimetres were computed and adjusted in the suitable distance from focus plane. High laser power re-melting decreases their porosity, increases adhesion to basic material. In case of high laser energy gas vapours escape from basic material and cause fissures, re-melted surfaces have to be carefully controlled. New approach to evaluation of the quality surface structure was realized by laser confocal microscopy. Direct measuring or 3D surface model is possible with resolution less than hundred nanometres, depressions along laser beam path or rises on the laser spot edges were determined. Particles and grains with dimensions about one micron in re-melting structures can be observed better then by optical microscopy. Parallel measurements of the surface roughness were realized by the contact inductive profilometer Talysurf, collected data were displayed by software tool Talymap in a plane or spatial pictures.

Quality of cardiovascular disease care in Ontario's primary care practices: a cross sectional study examining differences in guideline adherence by patient sex.

PubMed

Naicker, Kiyuri; Liddy, Clare; Singh, Jatinderpreet; Taljaard, Monica; Hogg, William

2014-06-18

Women are disproportionately affected by cardiovascular disease, often experiencing poorer outcomes following a cardiovascular event. Evidence points to inequities in processes of care as a potential contributing factor. This study sought to determine whether any sex differences exist in adherence to process of care guidelines for cardiovascular disease within primary care practices in Ontario, Canada. This is a secondary analysis of pooled cross-sectional baseline data collected through a larger quality improvement initiative known as the Improved Delivery of Cardiovascular Care (IDOCC). Chart abstraction was performed for 4,931 patients from 84 primary care practices in Eastern Ontario who had, or were at high risk of, cardiovascular disease. Measures examining adherence to guidelines associated with nine areas of cardiovascular care (coronary artery disease, peripheral vascular disease (PVD), stroke/transient ischemic attack, chronic kidney disease, diabetes, dyslipidemia, hypertension, smoking cessation, and weight management) were collected. Multivariable logistic regression analysis was performed to evaluate sex differences, adjusting for age, physician remuneration, and rurality. Women were significantly less likely to have their lipid profiles taken (OR=1.17, 95% CI 1.03-1.33), be prescribed lipid lowering medication for dyslipidemia (OR=1.54, 95% CI 1.20-1.97), and to be prescribed ASA following stroke (OR=1.56, 95% CI 1.39-1.75). Women with PVD were significantly less likely to be prescribed ACE inhibitors and/or angiotensin receptor blockers (OR=1.74, 95% CI 1.25-2.41) and lipid lowering medications (OR=1.95, 95% CI 1.46-2.62) or ASA (OR=1.59, 95% CI 1.43-1.78). However, women were more likely to have two blood pressure measurements taken and to be referred to a dietician or weight loss program. Male patients with diabetes were less likely to be prescribed glycemic control medication (OR=0.84, 95% CI 0.74-0.86). Sex disparities exist in the quality of

Linking Electricity for Peace: A Compelling Global Strategy.

ERIC Educational Resources Information Center

Meisen, Peter

1997-01-01

Comparative trend analysis shows striking improvements in all major societal indicators as electricity becomes available to developing nations. Discusses the linking of electrical grids between countries and across continents and the ramifications for standards of living, sustainable development, and world peace. (PVD)

Eat Your Weedies!

ERIC Educational Resources Information Center

Duke, James

2001-01-01

Explains the value of harvesting garden weeds and eating them. Discusses antioxidant and other nutritional qualities of weeds, weeds that are especially useful as raw or cooked vegetables, the importance of weed identification, and the dangers of weed-killing herbicides. Highlights purslane. (PVD)

Developing a Global Environmental Perspective in the School Curriculum in India: An Exploratory Study.

ERIC Educational Resources Information Center

Sharma, Anjali

1997-01-01

Argues that atmospheric pollution, ozone depletion, and marine pollution are more prominent in the developed world than in developing countries. Emphasizes the need to reorient the Indian school curriculum from a national perspective to promote global environmental perspectives in diverse subject areas. (PVD)

Finding Your Way in the Legislation Maze: How To Pass Legislation in Your State.

ERIC Educational Resources Information Center

Gross, Steve

1997-01-01

Offers tips for developing and passing legislation that would protect animals. Recommends being an authority on the issue, researching current laws, recognizing support groups and lobbyists, and knowing key legislative players. Contains a description of laws passed in the state of Illinois. (PVD)

Technology and Environmental Education: Friend or Foe?

ERIC Educational Resources Information Center

Athman, Julie; Bates, Tim

1998-01-01

Discusses the pros and cons often mentioned concerning technology in education. Describes measures of effectiveness of technology-enhanced educational programs, ranging from active learning and multidisciplinary tasks to performance-based assessments. Argues that technology should enhance rather than replace direct experiences. (PVD)

Micro- and Macrocirculatory Changes During Sepsis and Septic Shock in a Rat Model.

PubMed

Hua, Tianfeng; Wu, Xiaobo; Wang, Wei; Li, Hao; Bradley, Jennifer; Peberdy, Mary A; Ornato, Joseph P; Tang, Wanchun

2018-05-01

Microcirculation is the motor of sepsis. In the present study, we investigated whether microcirculatory alterations occur before changes of systemic hemodynamics in a rat model of cecum ligation and puncture (CLP)-induced sepsis. We further investigated renal microcirculatory changes during sepsis and compared those with buccal microcirculation. Twelve male Sprague-Dawley rats were randomized into a sham control group (n = 6) and a CLP group (n = 6). Perfused microvessel density (PVD) and microvascular flow index (MFI) were evaluated using sidestream dark field (SDF) video microscopy at baseline-60, 120, 180, 240, 300, and 360 min following CLP. A semiquantitative score was calculated for vessels of less than 20 μm, primarily representing the capillaries. Hemodynamic measurements such as cardiac output (CO), aortic pressure (AP), heart rate (HR), end-tidal CO2 (ETCO2), blood pH, and lactate were measured simultaneously. The serum cytokine interleukin 6 (IL-6) was measured at baseline-120, 240, and 360 min. In the CLP group, buccal PVD and MFI were reduced at 180 min (P < 0.05 vs. baseline); renal PVD and MFI were reduced at 180 min (P < 0.05 vs. baseline), but MAP and CO did not change until 300 min after CLP. In the rat model of peritonitis-induced sepsis, microcirculatory alterations of both peripheral mucosa and kidney occurred earlier than global hemodynamics. Monitoring the microcirculation may provide a means of early detection of circulatory failure during sepsis. The changes of renal microcirculation correlate with that of buccal during sepsis and septic shock.

Mercuric iodide medical imagers for low-exposure radiography and fluoroscopy

NASA Astrophysics Data System (ADS)

Zentai, George; Partain, Larry; Pavlyuchkova, Raisa; Proano, Cesar; Breen, Barry N.; Taieb, A.; Dagan, Ofer; Schieber, Michael; Gilboa, Haim; Thomas, Jerry

2004-05-01

Photoconductive polycrystalline mercuric iodide deposited on flat panel thin film transistor (TFT) arrays is being developed for direct digital X-ray detectors that can perform both radiographic and fluoroscopic medical imaging. The mercuric iodide is either vacuum deposited by Physical Vapor Deposition (PVD) or coated onto the array by a wet Particle-In-Binder (PIB) process. The PVD deposition technology has been scaled up to the 20 cm x 25 cm size required in common medical imaging applications. A TFT array with a pixel pitch of 127 microns is used for these imagers. Arrays of 10 cm x 10 cm size have been used to evaluate performance of mercuric iodide imagers. Radiographic and fluoroscopic images of diagnostic quality at up to 15 pulses per second were demonstrated. As we previously reported, the resolution is limited to the TFT array Nyquist frequency of ~3.9 lp/mm (127 micron pixel pitch). Detective Quantum Efficiency (DQE) has been measured as a function of spatial frequency for these imagers. The DQE is lower than the theoretically calculated value due to some additional noise sources of the electronics and the array. We will retest the DQE after eliminating these noise sources. Reliability and stress testing was also began for polycrystalline mercuric iodide PVD and PIB detectors. These are simplified detectors based upon a stripe electrode or circular electrode structure. The detectors were stressed under various voltage bias, temperature and time conditions. The effects of the stress tests on the detector dark current and sensitivity were determined.

Magnitude of dyslipedemia and its association with micro and macro vascular complications in type 2 diabetes: a hospital based study from Bikaner (Northwest India).

PubMed

Agrawal, R P; Sharma, Poornima; Pal, Mahender; Kochar, A; Kochar, D K

2006-08-01

Type 2 diabetes is not only associated with hyperglycemia but also with disorders of lipid metabolism. The aim of this study was to investigate the association of dyslipedemia with micro and macro vascular complications of diabetes. Population based cross sectional study included 4067 diabetic patients who visited hospital during January 2000 to December 2002. Lipid profile was estimated by semi autoanalyser, Retinopathy was assessed by fundoscopy, Nephropathy by microalbuminurea, coronary artery disease (CAD) by electro cardiogram (ECG) changes, peripheral vascular disease (PVD) by doppler study and neuropathy by clinical examinations. The association of dyslipedemia with micro and macro vascular complications was assessed by regression analysis. The prevalence of dyslipedemia is high in diabetic population with high serum cholesterol >240mg/dl was seen in 15%, serum triglycerides >160mg/dl was seen in 42.41%, raised LDL >130mg/dl in 45.26%, VLDL >40mg/dl in 24.09% and low levels of HDL-C <40mg/dl were seen in 52.27%. On regression analysis, CAD had strong correlation with high levels of VLDL (0.76), triglycerides (0.82), LDL (0.23) and low HDL (-0.81). Similar association was seen with PVD. Diabetic retinopathy and nephropathy were found to have significant correlation with low HDL (-0.43) and raised LDL (0.37), respectively. Neuropathy was not found to have any significant correlation with lipid profile abnormalities. Lipid profile abnormalities are very common in type 2 diabetes and it has great influence on CAD and PVD. Hence, appropriate preventive and treatment strategies should be considered timely.

Prevalence of purulent vaginal discharge in dairy herds depends on timing but not method of detection

USDA-ARS?s Scientific Manuscript database

A review of existing literature was conducted to determine the prevalence of purulent vaginal discharge (PVD) in dairy herds around the world and detection methodologies that influence prevalence estimates. Four databases (PubMed, Google Scholar, Web of Science, and Scopus) were queried with the sea...

Using Technology To Enhance Problem Solving and Critical Thinking Skills.

ERIC Educational Resources Information Center

Mingus, Tabitha; Grassl, Richard

1997-01-01

Secondary mathematics teachers participated in a problem-solving course in which technology became a means to develop as teachers and as problem solvers. Findings indicate a delineation between technical competence and metatechnology--thinking about how and when to apply technology to particular problems. (PVD)

Associations between intrauterine bacterial infection, reproductive tract inflammation, and reproductive performance in pasture-based dairy cows.

PubMed

de Boer, Melvin; Buddle, Bryce M; Heuer, Cord; Hussein, Hassan; Zheng, Tao; LeBlanc, Stephen J; McDougall, Scott

2015-06-01

Reproductive tract bacterial infections, particularly those caused by Escherichia coli and Trueperella pyogenes, can have a negative impact on reproductive performance. It has been hypothesized that the presence of E coli early postpartum may increase the risk of isolation of T pyogenes later postpartum. The objective of the present study was to examine associations between intrauterine bacterial infections with E coli and T pyogenes and any bacterial growth (irrespective of bacterial species), purulent vaginal discharge (PVD), cytologic evidence of endometritis (an increased proportion of polymorphonuclear cells [PMNs]), and reproductive performance. Dairy cows (n = 272) from six herds were examined at Days 0 (median, 2 days in milk), 21 and 42 postpartum. From each cow two intrauterine samples were collected via triple-guarded cytobrush at Days 0 and 21. The first cytobrush was used for bacteriologic culture. Escherichia coli and T pyogenes were isolated by culture, and E coli isolates were assigned to one of four phylogenetic groups using a two-step triplex polymerase chain reaction. In addition, T pyogenes was confirmed by polymerase chain reaction. The second cytobrush was used to prepare a cytology slide. Nucleated cells (n = 200) were categorized as epithelial cells, PMNs, or macrophages. Cows were also assessed for body condition score, PVD score, the presence of a CL, and pregnancy. Statistical analysis was performed using multivariable models. There was no association between the presence of E coli at Day 0 and probability of isolation of T pyogenes 3 weeks later; however, E coli positive cows at Day 0 were more likely to be diagnosed with E coli at Day 21 (relative risk [RR] = 2.0, P < 0.01). Escherichia coli at Day 0 or T pyogenes at Day 21 increased the risk of PVD diagnosis 3 weeks later (RR = 1.9; P = 0.04 and RR = 3.0; P = 0.05, respectively). Cows with any bacterial growth at Day 21, irrespective of species, were less likely to conceive within 3

The Yttrium Effect on Nanoscale Structure, Mechanical Properties, and High-Temperature Oxidation Resistance of (Ti0.6Al0.4)1- x Y x N Multilayer Coatings

NASA Astrophysics Data System (ADS)

Wang, Jingxian; Yazdi, Mohammad Arab Pour; Lomello, Fernando; Billard, Alain; Kovács, András; Schuster, Frédéric; Guet, Claude; White, Timothy J.; Wouters, Yves; Pascal, Céline; Sanchette, Frédéric; Dong, ZhiLi

2017-09-01

As machine tool coating specifications become increasingly stringent, the fabrication of protective titanium aluminum nitride (Ti-Al-N) films by physical vapor deposition (PVD) is progressively more demanding. Nanostructural modification through the incorporation of metal dopants can enhance coating mechanical properties. However, dopant selection and their near-atomic-scale role in performance optimization is limited. Here, yttrium was alloyed in multilayered Ti-Al-N films to tune microstructures, microchemistries, and properties, including mechanical characteristics, adhesion, wear resistance, and resilience to oxidation. By regulating processing parameters, the multilayer period (Λ) and Y content could be adjusted, which, in turn, permitted tailoring of grain nucleation and secondary phase formation. With the composition fixed at x = 0.024 in (Ti0.6Al0.4)1- x Y x N and Λ increased from 5.5 to 24 nm, the microstructure transformed from acicular grains with 〈111〉 preferred orientation to equiaxed grains with 〈200〉 texture, while the hardness (40.8 ± 2.8 GPa to 29.7 ± 4.9 GPa) and Young's modulus (490 ± 47 GPa to 424 ± 50 GPa) concomitantly deteriorated. Alternately, when Λ = 5.5 nm and x in (Ti0.6Al0.4)1- x Y x N was raised from 0 to 0.024, the hardness was enhanced (28.7 ± 7.3 GPa to 40.8 ± 2.8 GPa) while adhesion and wear resistance were not compromised. The Ti-Al-N adopted a rock-salt type structure with Y displacing either Ti or Al and stabilizing a secondary wurtzite phase. Moreover, Y effectively retarded coating oxidation at 1073 K (800 °C) in air by inhibiting grain boundary oxygen diffusion.

Risk of Cerebrovascular Events in Elderly Patients After Radiation Therapy Versus Surgery for Early-Stage Glottic Cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hong, Julian C.; Kruser, Tim J.; Gondi, Vinai

Purpose: Comprehensive neck radiation therapy (RT) has been shown to increase cerebrovascular disease (CVD) risk in advanced-stage head-and-neck cancer. We assessed whether more limited neck RT used for early-stage (T1-T2 N0) glottic cancer is associated with increased CVD risk, using the Surveillance, Epidemiology, and End Results (SEER)-Medicare linked database. Methods and Materials: We identified patients ≥66 years of age with early-stage glottic laryngeal cancer from SEER diagnosed from 1992 to 2007. Patients treated with combined surgery and RT were excluded. Medicare CPT codes for carotid interventions, Medicare ICD-9 codes for cerebrovascular events, and SEER data for stroke as the causemore » of death were collected. Similarly, Medicare CPT and ICD-9 codes for peripheral vascular disease (PVD) were assessed to serve as an internal control between treatment groups. Results: A total of 1413 assessable patients (RT, n=1055; surgery, n=358) were analyzed. The actuarial 10-year risk of CVD was 56.5% (95% confidence interval 51.5%-61.5%) for the RT cohort versus 48.7% (41.1%-56.3%) in the surgery cohort (P=.27). The actuarial 10-year risk of PVD did not differ between the RT (52.7% [48.1%-57.3%]) and surgery cohorts (52.6% [45.2%-60.0%]) (P=.89). Univariate analysis showed an increased association of CVD with more recent diagnosis (P=.001) and increasing age (P=.001). On multivariate Cox analysis, increasing age (P<.001) and recent diagnosis (P=.002) remained significantly associated with a higher CVD risk, whereas the association of RT and CVD remained not statistically significant (HR=1.11 [0.91-1.37,] P=.31). Conclusions: Elderly patients with early-stage laryngeal cancer have a high burden of cerebrovascular events after surgical management or RT. RT and surgery are associated with comparable risk for subsequent CVD development after treatment in elderly patients.« less

TH-C-19A-12: Two-Dimensional High Spatial-Resolution Dosimeter Using Europium Doped Potassium Chloride

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, H; Yang, D; Xiao, Z

2014-06-15

Purpose: Recent research has shown that KCl:Eu2+ has great potential for use in megavoltage radiation therapy dosimetry because this material exhibits excellent storage performance and is reusable due to strong radiation hardness. This work reports our attempts to fabricate 2D KCl:Eu2+ storage phosphor films (SPFs) using both a physical vapor deposition (PVD) method and a tape casting method. Methods: A thin layer of KCl:Eu2+ was deposited on a substrate of borosilicate glass (e.g., laboratory slides) with a PVD system. For tape casting, a homogenous suspension containing storage phosphor particles, liquid vehicle and polymer binder was formed and subsequently cast bymore » doctor-blade onto a polyethylene terephthalate substrate to form a 150 μm thick SPF. Results: X ray diffraction analysis showed that a 10 μm thick PVD sample was composed of highly crystalline KCl. No additional phases were observed, suggesting that the europium activator had completed been incorporated into the KCl matrix. Photostimulated luminescence and photoluminescence spectra suggested that F (Cl−) centers were the electron storage centers post x ray irradiation and that Eu2+ cations acted as luminescence centers in the photostimulation process. The 150 μm thick casted KCl:Eu2+ SPF showed sub-millimeter spatial resolution. Monte Carlo simulations further demonstrated that the admixture of 20% KCl:Eu2+ and 80% low Z polymer binder exhibited almost no energy dependence in a 6 MV beam. KCl:Eu2+ pellet samples showed a large dynamic range from 0.01 cGy to 60 Gy dose-to-water, and saturated at approximately 500 Gy as a Result of its intrinsic high radiation hardness. Conclusions: This discovery research provides strong evidence that KCl:Eu2+ based SPF with associated readout apparatus could Result in a novel electronic film system that has all the desirable features associated with classic radiographic film and, importantly, water equivalence and the capability of permanent

Uniform in N global well-posedness of the time-dependent Hartree-Fock-Bogoliubov equations in R^{1+1}

NASA Astrophysics Data System (ADS)

Chong, Jacky Jia Wei

2018-04-01

We prove the global well-posedness of the time-dependent Hartree-Fock-Bogoliubov (TDHFB) equations in R^{1+1} with two-body interaction potential of the form N^{-1}v_N(x) = N^{β -1} v(N^β x) where v≥0 is a sufficiently regular radial function, i.e., v \\in L^1(R)\\cap C^∞ (R) . In particular, using methods of dispersive PDEs similar to the ones used in Grillakis and Machedon (Commun Partial Differ Equ 42:24-67, 2017), we are able to show for any scaling parameter β >0 the TDHFB equations are globally well-posed in some Strichartz-type spaces independent of N, cf. (Bach et al. in The time-dependent Hartree-Fock-Bogoliubov equations for Bosons, 2016. arXiv:1602.05171).

Impact of a multidisciplinary vulvodynia program on sexual functioning and dyspareunia.

PubMed

Brotto, Lori A; Yong, Paul; Smith, Kelly B; Sadownik, Leslie A

2015-01-01

For many years, multidisciplinary approaches, which integrate psychological, physical, and medical treatments, have been shown to be effective for the treatment of chronic pain. To date, there has been anecdotal support, but little empirical data, to justify the application of this multidisciplinary approach toward the treatment of chronic sexual pain secondary to provoked vestibulodynia (PVD). This study aimed to evaluate a 10-week hospital-based treatment (multidisciplinary vulvodynia program [MVP]) integrating psychological skills training, pelvic floor physiotherapy, and medical management on the primary outcomes of dyspareunia and sexual functioning, including distress. A total of 132 women with a diagnosis of PVD provided baseline data and agreed to participate in the MVP. Of this group, n = 116 (mean age 28.4 years, standard deviation 7.1) provided complete data at the post-MVP assessment, and 84 women had complete data through to the 3- to 4-month follow-up period. There were high levels of avoidance of intimacy (38.1%) and activities that elicited sexual arousal (40.7%), with many women (50.4%) choosing to focus on their partner's sexual arousal and satisfaction at baseline. With treatment, over half the sample (53.8%) reported significant improvements in dyspareunia. Following the MVP, there were strong significant effects for the reduction in dyspareunia (P = 0.001) and sex-related distress (P < 0.001), and improvements in sexual arousal (P < 0.001) and overall sexual functioning (P = 0.001). More modest but still statistically significant were improvements in sexual desire, lubrication, orgasmic function, and sexual satisfaction. All improvements were retained at 2- to 3-month follow-up. This study provides strong support for the efficacy of a multidisciplinary approach (psychological, pelvic floor physiotherapy, and medical management) for improving dyspareunia and all domains of sexual functioning among women with PVD. The study

Independent Risk Factors Contributing to Acute Kidney Injury According to Updated Valve Academic Research Consortium-2 Criteria After Transcatheter Aortic Valve Implantation: A Meta-analysis and Meta-regression of 13 Studies.

PubMed

Wang, Jiayang; Yu, Wenyuan; Zhou, Ye; Yang, Yong; Li, Chenglong; Liu, Nan; Hou, Xiaotong; Wang, Longfei

2017-06-01

This study aimed to examine the risk factors for transcatheter aortic valve implantation (TAVI)-associated acute kidney injury (AKI) according to the AKI definition from the Valve Academic Research Consortium-2 (VARC-2). A meta-analysis. A total of 661 patients with post-TAVI AKI according to the VARC-2 definition and 2,012 controls were included in the meta-analysis. Patients undergoing TAVI were included in this meta-analysis. Multiple electronic databases were searched using predefined criteria. The diagnosis of AKI was based on the VARC-2 classification. The authors found that preoperative New York Heart Association class IV (odds ratio [OR], 7.77; 95% confidence interval [CI], 3.81-15.85), previous chronic renal disease (CKD) (OR, 2.81; 95% CI, 1.96-4.03), and requirement for transfusion (OR, 2.03; 95% CI, 1.59-2.59) were associated significantly with an increased risk for post-TAVI AKI. Furthermore, previous peripheral vascular disease (PVD), hypertension, atrial fibrillation, congestive heart failure, diabetes mellitus, and stroke were also risk factors for TAVI-associated AKI. Additionally, transfemoral access significantly correlated with a reduced risk for post-TAVI AKI (OR, 0.43; 95% CI, 0.33-0.57). The potential confounders, including Society of Thoracic Surgeons Score, the logistic European System for Cardiac Operative Risk Evaluation, aortic valve area, mean pressure gradient, left ventricular ejection fraction, age, body mass index, contrast volume, and valve type, had no impact on the association between the risk factors and post-TAVI AKI. Subgroup analysis of the eligible studies presenting multivariate logistic regression analysis on the independent risk factors for post-TAVI AKI revealed that previous CKD, previous PVD, and transapical access were independent risk factors for TAVI-associated AKI. The current meta-analysis suggested that previous CKD, previous PVD, and transapical access may be independent risk factors for TAVI-associated AKI

Demonstrating Phase Changes.

ERIC Educational Resources Information Center

Rohr, Walter

1995-01-01

Presents two experiments that demonstrate phase changes. The first experiment explores phase changes of carbon dioxide using powdered dry ice sealed in a piece of clear plastic tubing. The second experiment demonstrates an equilibrium process in which a crystal grows in equilibrium with its saturated solution. (PVD)

Nutrition in the prevention of Coronary Heart Disease and the management of lipoprotein disorders

USDA-ARS?s Scientific Manuscript database

Cardiovascular disease (CVD) is comprised of coronary heart disease (CHD), stroke, and peripheral vascular disease (PVD). CVD is caused by progressive narrowing and blockage of arteries supplying the heart, brain, and other tissues and organs. CVD is the leading cause of death and disability in our ...

Modeling Antibody Diversity.

ERIC Educational Resources Information Center

Baker, William P.; Moore, Cathy Ronstadt

1998-01-01

Understanding antibody structure and function is difficult for many students. The rearrangement of constant and variable regions during antibody differentiation can be effectively simulated using a paper model. Describes a hands-on laboratory exercise which allows students to model antibody diversity using readily available resources. (PVD)

Photovoltaic device and method

DOEpatents

Cleereman, Robert J; Lesniak, Michael J; Keenihan, James R; Langmaid, Joe A; Gaston, Ryan; Eurich, Gerald K; Boven, Michelle L

2015-01-27

The present invention is premised upon an improved photovoltaic device ("PVD") and method of use, more particularly to an improved photovoltaic device with an integral locator and electrical terminal mechanism for transferring current to or from the improved photovoltaic device and the use as a system.

Photovoltaic device and method

DOEpatents

Cleereman, Robert; Lesniak, Michael J.; Keenihan, James R.; Langmaid, Joe A.; Gaston, Ryan; Eurich, Gerald K.; Boven, Michelle L.

2015-11-24

The present invention is premised upon an improved photovoltaic device ("PVD") and method of use, more particularly to an improved photovoltaic device with an integral locator and electrical terminal mechanism for transferring current to or from the improved photovoltaic device and the use as a system.

Floaters and reduced contrast sensitivity after successful pharmacologic vitreolysis with ocriplasmin.

PubMed

Khoshnevis, Matin; Nguyen-Cuu, Jeannie; Sebag, J

2016-12-01

To describe the onset of floaters and reduction in contrast sensitivity (CS) following successful pharmacologic vitreolysis with ocriplasmin for the treatment of vitreo-macular traction (VMT) in a patient with previously normal CS. A 65-year-old woman with a past ocular history of normal visual acuity (VA = 20/26) and contrast sensitivity (1.81% Weber) presents with a 4-month history of distortions. VA decreased to 20/40 and Optical Coherence Tomography (OCT) demonstrated VMT. Pharmacologic vitreolysis was performed with intravitreal ocriplasmin. Ten weeks later the patient complained of floaters and was found to have a PVD and complete resolution of VMT. VA was still 20/40, but contrast sensitivity decreased by more than 100% to 3.77%Weber. After 6 months of attempted coping, this did not improve, so limited vitrectomy was performed. Post-operative VA = 20/26 and CS improved by 46% from 3.77%W to 2.03%W (normal). and importance: This case highlights a little discussed consequence of PVD induction by successful pharmacologic vitreolysis - the development of clinically significant floaters. The resulting reduction of contrast sensitivity was normalized by limited vitrectomy, strongly suggesting that the detached vitreous was the cause.

Ultras-stable Physical Vapor Deposited Amorphous Teflon Films with Extreme Fictive Temperature Reduction

NASA Astrophysics Data System (ADS)

McKenna, Gregory; Yoon, Heedong; Koh, Yung; Simon, Sindee

In the present work, we have produced highly stable amorphous fluoropolymer (Teflon AF® 1600) films to study the calorimetric and relaxation behavior in the deep in the glassy regime. Physical vapor deposition (PVD) was used to produce 110 to 700 nm PVD films with substrate temperature ranging from 0.70 Tg to 0.90 Tg. Fictive temperature (Tf) was measured using Flash DSC with 600 K/s heating and cooling rates. Consistent with prior observations for small molecular weight glasses, large enthalpy overshoots were observed in the stable amorphous Teflon films. The Tf reduction for the stable Teflon films deposited in the vicinity of 0.85 Tg was approximately 70 K compared to the Tgof the rejuvenated system. The relaxation behavior of stable Teflon films was measured using the TTU bubble inflation technique and following Struik's protocol in the temperature range from Tf to Tg. The results show that the relaxation time decreases with increasing aging time implying that devitrification is occurring in this regime.

Pre and post-amputation mobility of trans-tibial amputees: correlation to medical problems, age and mortality.

PubMed

Johnson, V J; Kondziela, S; Gottschalk, F

1995-12-01

This retrospective study compares pre and post-amputation mobility and the influence of age and associated medical problems. Data from the charts of 120 male patients who underwent unilateral trans-tibial (below-knee) amputation at the Dallas Veteran's Administration Hospital between June, 1983 and October, 1991, were collected and analyzed. Mobility was assessed with a six level scale developed by Volpicelli et al. (1983). The presence of cardiac disease, pulmonary disease (COPD), peripheral vascular disease (PVD), diabetes mellitus, degenerative joint disease, blindness, cerebral vascular accident (CVA), and age are correlated with changes in mobility after amputation. Older patients had more medical problems and lower post-amputation scores Individual medical problems did not influence mobility scores, but the presence of COPD and PVD lowered pre-amputation mobility scores. Cardiac disease and diabetes mellitus influenced post-amputation mobility scores by lowering them, either together or individually. Regardless of age, however, patients with more medical problems were poor ambulators. The cause of amputation per se did not influence mobility scores.

Some Non-FDA Approved Uses for Neuromodulation: A Review of the Evidence.

PubMed

Lee, Samuel; Abd-Elsayed, Alaa

2016-09-01

Neuromodulation, including spinal cord stimulation and peripheral nerve field stimulation, has been used with success in treating several painful conditions. The FDA approved the use of neuromodulation for a few indications. We review evidence for neuromodulation in treating some important painful conditions that are not currently FDA approved. This review included an online web search for only clinical trials testing the efficacy of neuromodulation in treating coronary artery disease, peripheral vascular disease (PVD), headache, and peripheral field stimulation. Our systematic literature search found 10, 6, and 3 controlled studies relating to coronary artery disease, PVD, and headache, respectively. Our review also included 5 noncontrolled studies relating to peripheral field stimulation, as no controlled studies had been completed. This review article shows compelling evidence based on clinical trials that neuromodulation can be of benefit for patients with serious painful conditions that are not currently approved by the FDA. © 2015 World Institute of Pain.

New deposition technique for metal films containing inorganic fullerene-like (IF) nanoparticles.

PubMed

Goldbart, Ohad; Yoffe, Alexander; Cohen, Sidney R; Rosentsveig, Rita; Feldman, Yishay; Rapoport, Lev; Tenne, Reshef

2013-07-22

This study describes a new method for fabrication of thin composite films using physical vapor deposition (PVD). Titanium (Ti) and hybrid films of titanium containing tungsten disulphide nanoparticles with inorganic fullerene-like structure (Ti/IF-WS2) were fabricated with a modified PVD machine. The evaporation process includes the pulsed deposition of IF-WS2 by a sprayer head. This process results in IF-WS2 nanoparticles embedded in a Ti matrix. The layers were characterized by various techniques, which confirm the composition and structure of the hybrid film. The Ti/IF-WS2 shows better wear resistance and a lower friction coefficient when compared to the Ti layer or Ti substrate. The Ti/IF films show very good antireflective properties in the visible and near-IR region. Such films may find numerous applications, for example, in the aerospace and medical technology. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

High Temperature Multilayer Environmental Barrier Coatings Deposited Via Plasma Spray-Physical Vapor Deposition

NASA Technical Reports Server (NTRS)

Harder, Bryan James; Zhu, Dongming; Schmitt, Michael P.; Wolfe, Douglas E.

2014-01-01

Si-based ceramic matrix composites (CMCs) require environmental barrier coatings (EBCs) in combustion environments to avoid rapid material loss. Candidate EBC materials have use temperatures only marginally above current technology, but the addition of a columnar oxide topcoat can substantially increase the durability. Plasma Spray-Physical Vapor Deposition (PS-PVD) allows application of these multilayer EBCs in a single process. The PS-PVD technique is a unique method that combines conventional thermal spray and vapor phase methods, allowing for tailoring of thin, dense layers or columnar microstructures by varying deposition conditions. Multilayer coatings were deposited on CMC specimens and assessed for durability under high heat flux and load. Coated samples with surface temperatures ranging from 2400-2700F and 10 ksi loads using the high heat flux laser rigs at NASA Glenn. Coating morphology was characterized in the as-sprayed condition and after thermomechanical loading using electron microscopy and the phase structure was tracked using X-ray diffraction.

Unusual hafnium-pyridylamido/ER(n) heterobimetallic adducts (ER(n) = ZnR2 or AlR3).

PubMed

Rocchigiani, Luca; Busico, Vincenzo; Pastore, Antonello; Talarico, Giovanni; Macchioni, Alceo

2014-02-17

NMR spectroscopy and DFT studies indicate that the Symyx/Dow Hf(IV)-pyridylamido catalytic system for olefin polymerization, [{N(-),N,CNph(-)}HfMe][B(C6F5)4] (1, Nph = naphthyl), interacts with ER(n) (E = Al or Zn, R = alkyl group) to afford unusual heterobimetallic adducts [{N(-),N}HfMe(μ-CNph)(μ-R)ER(n-1)][B(C6F5)4 in which the cyclometalated Nph acts as a bridge between Hf and E. (1)H VT (variable-temperature) EXSY NMR spectroscopy provides direct evidence of reversible alkyl exchanges in heterobimetallic adducts, with ZnR2 showing a higher tendency to participate in this exchange than AlR3. 1-Hexene/ERn competitive reactions with 1 at 240 K reveal that the formation of adducts is strongly favored over 1-hexene polymerization. Nevertheless, a slight increase in the temperature (to >265 K) initiates 1-hexene polymerization. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A high performance ceramic-polymer separator for lithium batteries

NASA Astrophysics Data System (ADS)

Kumar, Jitendra; Kichambare, Padmakar; Rai, Amarendra K.; Bhattacharya, Rabi; Rodrigues, Stanley; Subramanyam, Guru

2016-01-01

A three-layered (ceramic-polymer-ceramic) hybrid separator was prepared by coating ceramic electrolyte [lithium aluminum germanium phosphate (LAGP)] over both sides of polyethylene (PE) polymer membrane using electron beam physical vapor deposition (EB-PVD) technique. Ionic conductivities of membranes were evaluated after soaking PE and LAGP/PE/LAGP membranes in a 1 Molar (1M) lithium hexafluroarsenate (LiAsF6) electrolyte in ethylene carbonate (EC), dimethyl carbonate (DMC) and ethylmethyl carbonate (EMC) in volume ratio (1:1:1). Scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques were employed to evaluate morphology and structure of the separators before and after cycling performance tests to better understand structure-property correlation. As compared to regular PE separator, LAGP/PE/LAGP hybrid separator showed: (i) higher liquid electrolyte uptake, (ii) higher ionic conductivity, (iii) lower interfacial resistance with lithium and (iv) lower cell voltage polarization during lithium cycling at high current density of 1.3 mA cm-2 at room temperature. The enhanced performance is attributed to higher liquid uptake, LAGP-assisted faster ion conduction and dendrite prevention. Optimization of density and thickness of LAGP layer on PE or other membranes through manipulation of PVD deposition parameters will enable practical applications of this novel hybrid separator in rechargeable lithium batteries with high energy, high power, longer cycle life, and higher safety level.

Digging Deeper with Trees.

ERIC Educational Resources Information Center

Growing Ideas, 2001

2001-01-01

Describes hands-on science areas that focus on trees. A project on leaf pigmentation involves putting crushed leaves in a test tube with solvent acetone to dissolve pigment. In another project, students learn taxonomy by sorting and classifying leaves based on observable characteristics. Includes a language arts connection. (PVD)

The Seat of Insect Learning.

ERIC Educational Resources Information Center

Dyer, Fred C.

1997-01-01

Describes the role of mushroom bodies--cup-shaped structures perched atop the brain of an insect--in learning. Mushroom bodies may help fruit flies in learning meaningful odors, cockroaches in spatial learning, and honeybees both in locating pollen and nectar and in navigating back to the colony. (PVD)

Global Climate Change Interaction Web.

ERIC Educational Resources Information Center

Fortner, Rosanne W.

1998-01-01

Students investigate the effects of global climate change on life in the Great Lakes region in this activity. Teams working together construct as many links as possible for such factors as rainfall, lake water, evaporation, skiing, zebra mussels, wetlands, shipping, walleye, toxic chemicals, coastal homes, and population. (PVD)

Mathematical analysis of the Photovoltage Decay (PVD) method for minority carrier lifetime measurements

NASA Technical Reports Server (NTRS)

Vonroos, O. H.

1982-01-01

When the diffusion length of minority carriers becomes comparable with or larger than the thickness of a p-n junction solar cell, the characteristic decay of the photon-generated voltage results from a mixture of contributions with different time constants. The minority carrier recombination lifetime tau and the time constant l(2)/D, where l is essentially the thickness of the cell and D the minority carrier diffusion length, determine the signal as a function of time. It is shown that for ordinary solar cells (n(+)-p junctions), particularly when the diffusion length L of the minority carriers is larger than the cell thickness l, the excess carrier density decays according to exp (-t/tau-pi(2)Dt/4l(2)), tau being the lifetime. Therefore, tau can be readily determined by the photovoltage decay method once D and L are known.

Economic burden of cardiovascular events and fractures among patients with end-stage renal disease.

PubMed

Doan, Quan V; Gleeson, Michelle; Kim, John; Borker, Rohit; Griffiths, Robert; Dubois, Robert W

2007-07-01

To quantify direct medical costs of fractures and cardiovascular diseases among end-stage renal disease (ESRD) patients. Medicare claims data from year 2001 of the United States Renal Data System were used to quantify direct medical costs of acute episodic events (acute myocardial infarction (MI), stroke, heart valve repair, heart valve replacement, fractures) and chronic conditions (arrhythmia, peripheral vascular disease (PVD), heart valve disease (HVD), congestive heart failure (CHF), coronary heart disease, and non-acute stroke). Costs of hospitalized episodes of arrhythmia, PVD, CHF, and angina were also quantified. For acute events, costs were quantified using an episode-of-care approach. For chronic conditions, annualized costs were reported. Only costs specific to the events or conditions of interest were included and reported, in 2006 US dollars. Drug and dialysis-related costs were excluded. Diagnosis and procedure codes were used to identify these events and conditions. Among acute events analyzed as clinical episodes, PVD ($358 million) was associated with the greatest economic burden, followed by CHF, arrhythmia, angina, acute MI, heart valve replacement, hip fracture, acute stroke, heart valve repair, vertebral fracture, and pelvic fracture ($8.6 million). The cost per episode ranged from approximately $12,000 to 104,000. Among chronic conditions, CHF ($681 million) contributed the greatest economic burden; HVD ($100 million) contributed the least. The costs per patient-year ranged from $23,000 to 45,000 among chronic conditions. The costing methodology utilized could contribute to an underestimate of the economic impact of each condition; therefore these results are considered conservative. The economic burden of these selected conditions was substantial to health services payers who finance ESRD patient care. Episodic costs were high for most acute events.

Study of PVD AlCrN Coating for Reducing Carbide Cutting Tool Deterioration in the Machining of Titanium Alloys.

PubMed

Cadena, Natalia L; Cue-Sampedro, Rodrigo; Siller, Héctor R; Arizmendi-Morquecho, Ana M; Rivera-Solorio, Carlos I; Di-Nardo, Santiago

2013-05-24

The manufacture of medical and aerospace components made of titanium alloys and other difficult-to-cut materials requires the parallel development of high performance cutting tools coated with materials capable of enhanced tribological and resistance properties. In this matter, a thin nanocomposite film made out of AlCrN (aluminum-chromium-nitride) was studied in this research, showing experimental work in the deposition process and its characterization. A heat-treated monolayer coating, competitive with other coatings in the machining of titanium alloys, was analyzed. Different analysis and characterizations were performed on the manufactured coating by scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDXS), and X-ray diffraction (XRD). Furthermore, the mechanical behavior of the coating was evaluated through hardness test and tribology with pin-on-disk to quantify friction coefficient and wear rate. Finally, machinability tests using coated tungsten carbide cutting tools were executed in order to determine its performance through wear resistance, which is a key issue of cutting tools in high-end cutting at elevated temperatures. It was demonstrated that the specimen (with lower friction coefficient than previous research) is more efficient in machinability tests in Ti6Al4V alloys. Furthermore, the heat-treated monolayer coating presented better performance in comparison with a conventional monolayer of AlCrN coating.

Study of PVD AlCrN Coating for Reducing Carbide Cutting Tool Deterioration in the Machining of Titanium Alloys

PubMed Central

Cadena, Natalia L.; Cue-Sampedro, Rodrigo; Siller, Héctor R.; Arizmendi-Morquecho, Ana M.; Rivera-Solorio, Carlos I.; Di-Nardo, Santiago

2013-01-01

The manufacture of medical and aerospace components made of titanium alloys and other difficult-to-cut materials requires the parallel development of high performance cutting tools coated with materials capable of enhanced tribological and resistance properties. In this matter, a thin nanocomposite film made out of AlCrN (aluminum–chromium–nitride) was studied in this research, showing experimental work in the deposition process and its characterization. A heat-treated monolayer coating, competitive with other coatings in the machining of titanium alloys, was analyzed. Different analysis and characterizations were performed on the manufactured coating by scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDXS), and X-ray diffraction (XRD). Furthermore, the mechanical behavior of the coating was evaluated through hardness test and tribology with pin-on-disk to quantify friction coefficient and wear rate. Finally, machinability tests using coated tungsten carbide cutting tools were executed in order to determine its performance through wear resistance, which is a key issue of cutting tools in high-end cutting at elevated temperatures. It was demonstrated that the specimen (with lower friction coefficient than previous research) is more efficient in machinability tests in Ti6Al4V alloys. Furthermore, the heat-treated monolayer coating presented better performance in comparison with a conventional monolayer of AlCrN coating. PMID:28809266

A Dynamic Programming Approach to the Daily Routing of Aeromedical Evacuation System Missions

DTIC Science & Technology

1989-06-08

1 AEX 1 HSV 1 ADW 4 NKT 2 BYH 1 NKX 1 MXF 3 *CAE 1 ROA 1 SZL 1 *SBD 1 BLV 4 BOS 1 CMI 2 AGS 1 WRI 1 SAW 2 BHM 1 NHZ 1 BTL 1 YNG 1 RST 1 ...LAX 1 BLV 4 BKF 4 HSV 3 NIP 3 PVD 4 *CHD 1 NQA 2 BLV 3 SWF 1 ABQ 2 GUS I DHN 1 RME 2 NKX 2 OSC 2 *MEI 1 EWR 3 SAW 2 CBM 1 WRI 2 BYH I *NMM 1 PBG 1

The Winter Olympics--On Ice.

ERIC Educational Resources Information Center

Hoover, Barbara G.

1998-01-01

Describes several science activities designed around the upcoming Winter Olympics ice skating events which demonstrate the scientific principles behind the sport. Students learn that increasing the pressure on ice will lead to the ice melting, the principle involved in the spinning swing, and the technology of skates and skating outfits. (PVD)

The Anatomy of Memory.

ERIC Educational Resources Information Center

Cave, Sitara; Schwartzenberg, Susan

1998-01-01

Fleeting electrochemical connections made between brain cells help people remember the thoughts, skills, experiences, and knowledge that make them unique. Presents the dissection of the brain of a sheep, an animal in which brain structure and function are similar to that in humans, to demonstrate where these processes take place. (PVD)

Using Apple Peel Sections To Study Plant Cells and Water Relations.

ERIC Educational Resources Information Center

Silvius, John E.; Eckart, Christopher P.

1997-01-01

Suggests the cells of an apple peel as a plant species that can further enhance the plant cell laboratory. Describes the structure of apple peel cells and the benefits of including them in studies of plant cells. Suggests questions to stimulate further investigations for open-ended laboratories or independent studies. (PVD)

Interface activation and surface characteristics of Ti/TiN/HA coated sintered stainless steels

NASA Astrophysics Data System (ADS)

Choe, Han-Cheol; Ko, Yeong-Mu

2006-02-01

Interface activation and surface characteristics of Ti/TiN/HA film coated sintered stainless steels (SSS) have been investigated by electrochemical and biocompatibility tests. HA (hydroxyapatite), Ti, and Ti/TiN film coatings were applied using electron-beam deposition method (EB-PVD). Ti, Ti/TiN, and Ti/TiN/HA film coated surfaces and layers were investigated by SEM and XPS. The coated films showed micro-columnar structure, and Ti/TiN/HA films were denser than Ti or HA-only film. The corrosion resistance of the HA coating was similar to that of Ti/TiN/HA film coating when Cu content reached 4 wt.%, but the corrosion resistance of the HA coating decreased when Cu content increased from 4 wt.% in 0.9% NaCl solution. Therefore, HA-only coating could ensure corrosion resistance when Cu content does not exceed 4 wt.%. The results of biocompatibility tests of SSS on dogs showed that bone formation and biocompatibility were favorable when Cu content did not exceed 4 wt.%. The biocompatibility with bone was generally favorable in Ti/TiN/HA film coating and HA-only coating, while bone formation was somewhat faster for the HA film coated surface than for the Ti/TiN/HA film coating. Also, good cell growth and osseointegration without toxicity were observed.

Threading on ADI Cast Iron, Developing Tools and Conditions

NASA Astrophysics Data System (ADS)

Elósegui, I.; de Lacalle, L. N. López

2011-01-01

The present work is focussed on the improvement of the design and performance of the taps used for making threaded holes in ADI (Austempered Ductile Iron). It is divided in two steps: a) The development of a method valid to compare the taps wear without reaching the end of their life, measuring the required torque to make one threaded hole, after having made previously a significant number of threaded holes. The tap wear causes some teeth geometrical changes, that supposes an increase in the required torque and axial force. b) The taps wear comparison method is open to apply on different PVD coated taps, AlTiN, AlCrSiN, AlTiSiN, , and to different geometries.

The characteristics of a new negative metal ion beam source and its applications

NASA Astrophysics Data System (ADS)

Paik, Namwoong

2001-10-01

Numerous efforts at energetic thin film deposition processes using ion beams have been made to meet the demands of today's thin film industry. As one of these efforts, a new Magnetron Sputter Negative Ion Source (MSNIS) was developed. In this study, the development and the characterization of the MSNIS were investigated. Amorphous carbon films were used as a sample coating medium to evaluate the ion beam energy effect. A review of energetic Physical Vapor Deposition (PVD) techniques is presented in Chapter 1. The energetic PVD methods can be classified into two major categories: the indirect ion beam method Ion Beam Assisted Deposition (IBAD), and the direct ion beam method-Direct Ion Beam Deposition (DIBD). In this chapter, currently available DIBD processes such as Cathodic Arc, Laser Ablation, Ionized Physical Vapor Deposition (I-PVD) and Magnetron Sputter Negative Ion Source (MSNIS) are individually reviewed. The design and construction of the MSNIS is presented in chapter 2. The MSNIS is a hybrid of the conventional magnetron sputter configuration and the cesium surface ionizer. The negative sputtered ions are produced directly from the sputter target by surface ionization. In chapter 3, the ion beam and plasma characteristics of an 8″ diameter MSNIS are investigated using a retarding field analyzer and a cylindrical Langmuir Probe. The measured electron temperature is approximately 2-5 eV, while the plasma density and plasma potential were of the order of 10 11-1012 cm3 and 5-20 V, respectively, depending on the pressure and power. In chapter 4, in order to evaluate the effect of the ion beam on the resultant films, amorphous carbon films were deposited under various conditions. The structure of carbon films was investigated using Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). The result suggests the fraction of spa bonding is more than 70% in some samples prepared by MSNIS while magnetron sputtered samples showed less than 30%. (Abstract

A new material platform of Si photonics for implementing architecture of dense wavelength division multiplexing on Si bulk wafer

PubMed Central

Zhang, Ziyi; Yako, Motoki; Ju, Kan; Kawai, Naoyuki; Chaisakul, Papichaya; Tsuchizawa, Tai; Hikita, Makoto; Yamada, Koji; Ishikawa, Yasuhiko; Wada, Kazumi

2017-01-01

Abstract A new materials group to implement dense wavelength division multiplexing (DWDM) in Si photonics is proposed. A large thermo-optic (TO) coefficient of Si malfunctions multiplexer/demultiplexer (MUX/DEMUX) on a chip under thermal fluctuation, and thus DWDM implementation, has been one of the most challenging targets in Si photonics. The present study specifies an optical materials group for DWDM by a systematic survey of their TO coefficients and refractive indices. The group is classified as mid-index contrast optics (MiDex) materials, and non-stoichiometric silicon nitride (SiNx) is chosen to demonstrate its significant thermal stability. The TO coefficient of non-stoichiometric SiNx is precisely measured in the temperature range 24–76 °C using the SiNx rings prepared by two methods: chemical vapor deposition (CVD) and physical vapor deposition (PVD). The CVD-SiNx ring reveals nearly the same TO coefficient reported for stoichiometric CVD-Si3N4, while the value for the PVD-SiNx ring is slightly higher. Both SiNx rings lock their resonance frequencies within 100 GHz in this temperature range. Since CVD-SiNx needs a high temperature annealing to reduce N–H bond absorption, it is concluded that PVD-SiNx is suited as a MiDex material introduced in the CMOS back-end-of-line. Further stabilization is required, considering the crosstalk between two channels; a ‘silicone’ polymer is employed to compensate for the temperature fluctuation using its negative TO coefficient, called athermalization. This demonstrates that the resonance of these SiNx rings is locked within 50 GHz at the same temperature range in the wavelength range 1460–1620 nm (the so-called S, C, and L bands in optical fiber communication networks). A further survey on the MiDex materials strongly suggests that Al2O3, Ga2O3 Ta2O5, HfO2 and their alloys should provide even more stable platforms for DWDM implementation in MiDex photonics. It is discussed that the MiDex photonics will

EVALUATION AND RECOMMENDATION OF SALTSTONE MIXER AUGER/PADDLES MATERIALS OF CONSTRUCTION FOR IMPROVED WEAR RESISTANCE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mickalonis, J.; Torres, R.

2012-08-15

Wear and corrosion testing were conducted to evaluate alternate materials of construction for the Saltstone mixer auger and paddles. These components have been degraded by wear from the slurry processed in the mixer. Material test options included PVD coatings (TiN, TiCN, and ZrN), weld overlays (Stellite 12 and Ultimet) and higher hardness steels and carbides (D2 and tungsten carbide). The corrosion testing demonstrated that the slurry is not detrimental to the current materials of construction or the new candidates. The ASTM G75 Miller wear test showed that the high hardness materials and the Stellite 12 weld overlay provide superior wearmore » relative to the Astralloy and CF8M stainless steel, which are the current materials of construction, as well as the PVD coatings and Ultimet. The following recommendations are made for selecting new material options and improving the overall wear resistance of the Saltstone mixer components: A Stellite 12 weld overlay or higher hardness steel (with toughness equivalent to Astralloy) be used to improve the wear resistance of the Saltstone mixer paddles; other manufacturing specifications for the mixer need to be considered in this selection. The current use of the Stellite 12 weld overlay be evaluated so that coverage of the 316 auger can be optimized for improved wear resistance of the auger. The wear surfaces of the Saltstone mixer auger and paddles be evaluated so that laboratory data can be better correlated to actual service. The 2-inch Saltstone mixer prototype be used to verify material performance.« less

Using Chemistry and Color To Analyze Household Products: A 10-12-Hour Laboratory Project at the General Chemistry Level.

ERIC Educational Resources Information Center

Bosma, Wayne B.

1998-01-01

Describes a set of experiments using a UV-VIS spectrometer to identify food colorings and to measure the pH of soft drinks. The first laboratory component uses locations and shapes of visible absorption peaks as a means of identifying dyes while the second portion uses the spectrometer for determining pH. (PVD)

A Simple Formula for Quantiles on the TI-82/83 Calculator.

ERIC Educational Resources Information Center

Eisner, Milton P.

1997-01-01

The concept of percentile is a fundamental part of every course in basic statistics. Many such courses are now taught to students and require them to have TI-82 or TI-83 calculators. The functions defined in these calculators enable students to easily find the percentiles of a discrete data set. (PVD)

Teaching the Rock Cycle with Ease.

ERIC Educational Resources Information Center

Bereki, Debra

2000-01-01

Describes a hands-on lesson for teaching high school students the concept of the rock cycle using sedimentary, metamorphic, and igneous rocks. Students use a rock cycle diagram to identify pairs of rocks. From the rock cycle, students explain on paper how their first rock became the second rock and vice versa. (PVD)

Effect of Metal Ion Etching on the Tribological, Mechanical and Microstructural Properties of TiN-COATED d2 Tool Steel Using Cae Pvd Technique

NASA Astrophysics Data System (ADS)

Ali, Mubarak; Hamzah, Esah Binti; Hj. Mohd Toff, Mohd Radzi

A study has been made on TiN coatings deposited on D2 tool steel substrates by using commercially available cathodic arc evaporation, physical vapor deposition technique. The goal of this work is to determine the usefulness of TiN coatings in order to improve the micro-Vickers hardness, coefficient of friction and surface roughness of TiN coating deposited on tool steel, which is vastly use in tool industry for various applications. A pin-on-disc test was carried out to study the coefficient of friction versus sliding distance of TiN coating at various ion etching rates. The tribo-test showed that the minimum value recorded for friction coefficient was 0.386 and 0.472 with standard deviation of 0.056 and 0.036 for the coatings deposited at zero and 16 min ion etching. The differences in friction coefficient and surface roughness was mainly associated with the macrodroplets, which was produced during etching stage. The coating deposited for 16 min metal ion etching showed the maximum hardness, i.e., about five times higher than uncoated one and 1.24 times to the coating deposited at zero ion etching. After friction test, the wear track was observed by using field emission scanning electron microscope. The coating deposited for zero ion etching showed small amounts of macrodroplets as compared to the coating deposited for 16 min ion etching. The elemental composition on the wear scar were investigated by means of energy dispersive X-ray, indicate no further TiN coating on wear track. A considerable improvement in TiN coatings was recorded as a function of various ion etching rates.

Wear behaviour of wear-resistant adaptive nano-multilayered Ti-Al-Mo-N coatings

NASA Astrophysics Data System (ADS)

Sergevnin, V. S.; Blinkov, I. V.; Volkhonskii, A. O.; Belov, D. S.; Kuznetsov, D. V.; Gorshenkov, M. V.; Skryleva, E. A.

2016-12-01

Coating samples in the Ti-Al-Mo-N system were obtained by arc-PVD method at variable bias voltage Ub applied to the substrate, and the partial pressure of nitrogen P(N2) used as a reaction gas. The deposited coatings were characterized by a nanocrystalline structure with an average grain size of 30-40 nm and multilayered architecture with alternating layers of (Ti,Al)N nitride and Mo-containing phases with a thickness comparable to the grain size. Coatings of (Ti,Al)N-Mo-Mo2N and (Ti,Al)N-Mo2N compositions were obtained by changing deposition parameters. The obtained coatings had hardness of 40 GPa and the relative plastic deformation under microindentation up to 60%. (Ti,Al)N-Mo2N coatings demonstrated better physicomechanical characteristics, showing high resistance to crack formation and destruction through the plastic deformation mechanism without brittle fracturing, unlike (Ti,Al)N-Mo-Mo2N. The friction coefficient of the study coatings (against Al2O3 balls under dry condition using a pin-on-disc method) reached the values of 0.35 and 0.5 at 20 °C and 500 °C respectively, without noticeable wear within this temperature range. These tribological properties were achieved by forming MoO3 acting as a solid lubricant. At higher temperatures the deterioration in the tribological properties is due to the high rate of MoO3 sublimation from friction surfaces.

Pravastatin reverses obesity-induced dysfunction of induced pluripotent stem cell-derived endothelial cells via a nitric oxide-dependent mechanism

PubMed Central

Gu, Mingxia; Mordwinkin, Nicholas M.; Kooreman, Nigel G.; Lee, Jaecheol; Wu, Haodi; Hu, Shijun; Churko, Jared M.; Diecke, Sebastian; Burridge, Paul W.; He, Chunjiang; Barron, Frances E.; Ong, Sang-Ging; Gold, Joseph D.; Wu, Joseph C.

2015-01-01

Aims High-fat diet-induced obesity (DIO) is a major contributor to type II diabetes and micro- and macro-vascular complications leading to peripheral vascular disease (PVD). Metabolic abnormalities of induced pluripotent stem cell-derived endothelial cells (iPSC-ECs) from obese individuals could potentially limit their therapeutic efficacy for PVD. The aim of this study was to compare the function of iPSC-ECs from normal and DIO mice using comprehensive in vitro and in vivo assays. Methods and results Six-week-old C57Bl/6 mice were fed with a normal or high-fat diet. At 24 weeks, iPSCs were generated from tail tip fibroblasts and differentiated into iPSC-ECs using a directed monolayer approach. In vitro functional analysis revealed that iPSC-ECs from DIO mice had significantly decreased capacity to form capillary-like networks, diminished migration, and lower proliferation. Microarray and ELISA confirmed elevated apoptotic, inflammatory, and oxidative stress pathways in DIO iPSC-ECs. Following hindlimb ischaemia, mice receiving intramuscular injections of DIO iPSC-ECs had significantly decreased reperfusion compared with mice injected with control healthy iPSC-ECs. Hindlimb sections revealed increased muscle atrophy and presence of inflammatory cells in mice receiving DIO iPSC-ECs. When pravastatin was co-administered to mice receiving DIO iPSC-ECs, a significant increase in reperfusion was observed; however, this beneficial effect was blunted by co-administration of the nitric oxide synthase inhibitor, Nω-nitro-l-arginine methyl ester. Conclusion This is the first study to provide evidence that iPSC-ECs from DIO mice exhibit signs of endothelial dysfunction and have suboptimal efficacy following transplantation in a hindlimb ischaemia model. These findings may have important implications for future treatment of PVD using iPSC-ECs in the obese population. PMID:25368203

Changes in co-morbidity pattern in patients starting renal replacement therapy in Europe-data from the ERA-EDTA Registry.

PubMed

Ceretta, Maria L; Noordzij, Marlies; Luxardo, Rosario; De Meester, Johan; Abad Diez, Jose M; Finne, Patrik; Heaf, James G; Couchoud, Cécile; Kramar, Reinhard; Collart, Frederic; Cases, Aleix; Palsson, Runolfur; Reisæter, Anna V; Rydell, Helena; Massy, Ziad A; Jager, Kitty J; Kramer, Anneke

2018-01-18

Patients starting renal replacement therapy (RRT) for end-stage renal disease often present with one or more co-morbidities. This study explored the prevalence of co-morbidities in patients who started RRT in Europe during the period from 2005 to 2014. Using data from patients aged 20 years or older from all 11 national or regional registries providing co-morbidity data to the European Renal Association - European Dialysis and Transplant Association Registry, we examined the prevalence of the following co-morbidities: diabetes mellitus (DM) (primary renal disease and/or co-morbidity), ischaemic heart disease (IHD), congestive heart failure (CHF), peripheral vascular disease (PVD), cerebrovascular disease (CVD) and malignancy. Overall, 70% of 7578 patients who initiated RRT in 2014 presented with at least one co-morbidity: 39.0% presented with DM, 25.0% with IHD, 22.3% with CHF, 17.7% with PVD, 16.4% with malignancy and 15.5% with CVD. These percentages differed substantially between countries. Co-morbidities were more common in men than in women, in older patients than in younger patients, and in patients on haemodialysis at Day 91 when compared with patients on peritoneal dialysis. Between 2005 and 2014 the prevalence of DM and malignancy increased over time, whereas the prevalence of IHD and PVD declined. More than two-thirds of patients initiating RRT in Europe have at least one co-morbidity. With the rising age at the start of RRT over the last decade, there have been changes in the co-morbidity pattern: the prevalence of cardiovascular co-morbidities decreased, while the prevalence of DM and malignancy increased. © The Author(s) 2018. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Young in Mind.

ERIC Educational Resources Information Center

Miller, Mary K.

1998-01-01

According to experts, relatively minor memory lapses such as searching for misplaced car keys are perfectly normal but there are things that people can do to keep their minds agile and their memories alive. Discusses lifestyles and techniques used by seniors dedicated to exercising their minds. Also explores the science of memory and aging. (PVD)

Making an Ice Core.

ERIC Educational Resources Information Center

Kopaska-Merkel, David C.

1995-01-01

Explains an activity in which students construct a simulated ice core. Materials required include only a freezer, food coloring, a bottle, and water. This hands-on exercise demonstrates how a glacier is formed, how ice cores are studied, and the nature of precision and accuracy in measurement. Suitable for grades three through eight. (Author/PVD)

iMAST FY2007 Annual Report

DTIC Science & Technology

2007-01-01

laser cladding techniques. Customer: COMSUBPAC NAVSEASYSCOM Pearl Harbor Naval Shipyard...motion device to laser clad and re-dimension the affected tube to original specifications. Benefits: ° Reduce life cycle costs of tube...coatings via cold gas dynamic spraying and EB–PVD ° Spray-formed HT aluminum alloys ° Localized laser HT and cladding for wear

Janice VanCleave's World: Trapper.

ERIC Educational Resources Information Center

VanCleave, Janice

2000-01-01

Introduces young children to the safe study of insects and promotes respect for the study specimen. Children craft insects out of marshmallows, toothpicks, and cardboard and practice using a clear plastic cup to collect and observe insects through a magnifying lens. With their new skills, they can move on to studying real insects. (PVD)

Refined hierarchical kinematics quasi-3D Ritz models for free vibration analysis of doubly curved FGM shells and sandwich shells with FGM core

NASA Astrophysics Data System (ADS)

Fazzolari, Fiorenzo A.; Carrera, Erasmo

2014-02-01

In this paper, the Ritz minimum energy method, based on the use of the Principle of Virtual Displacements (PVD), is combined with refined Equivalent Single Layer (ESL) and Zig Zag (ZZ) shell models hierarchically generated by exploiting the use of Carrera's Unified Formulation (CUF), in order to engender the Hierarchical Trigonometric Ritz Formulation (HTRF). The HTRF is then employed to carry out the free vibration analysis of doubly curved shallow and deep functionally graded material (FGM) shells. The PVD is further used in conjunction with the Gauss theorem to derive the governing differential equations and related natural boundary conditions. Donnell-Mushtari's shallow shell-type equations are given as a particular case. Doubly curved FGM shells and doubly curved sandwich shells made up of isotropic face sheets and FGM core are investigated. The proposed shell models are widely assessed by comparison with the literature results. Two benchmarks are provided and the effects of significant parameters such as stacking sequence, boundary conditions, length-to-thickness ratio, radius-to-length ratio and volume fraction index on the circular frequency parameters and modal displacements are discussed.

Kinetics of Si and Ge nanowires growth through electron beam evaporation

PubMed Central

2011-01-01

Si and Ge have the same crystalline structure, and although Si-Au and Ge-Au binary alloys are thermodynamically similar (same phase diagram, with the eutectic temperature of about 360°C), in this study, it is proved that Si and Ge nanowires (NWs) growth by electron beam evaporation occurs in very different temperature ranges and fluence regimes. In particular, it is demonstrated that Ge growth occurs just above the eutectic temperature, while Si NWs growth occurs at temperature higher than the eutectic temperature, at about 450°C. Moreover, Si NWs growth requires a higher evaporated fluence before the NWs become to be visible. These differences arise in the different kinetics behaviors of these systems. The authors investigate the microscopic growth mechanisms elucidating the contribution of the adatoms diffusion as a function of the evaporated atoms direct impingement, demonstrating that adatoms play a key role in physical vapor deposition (PVD) NWs growth. The concept of incubation fluence, which is necessary for an interpretation of NWs growth in PVD growth conditions, is highlighted. PMID:21711696

Kinetics of Si and Ge nanowires growth through electron beam evaporation.

PubMed

Artoni, Pietro; Pecora, Emanuele Francesco; Irrera, Alessia; Priolo, Francesco

2011-02-21

Si and Ge have the same crystalline structure, and although Si-Au and Ge-Au binary alloys are thermodynamically similar (same phase diagram, with the eutectic temperature of about 360°C), in this study, it is proved that Si and Ge nanowires (NWs) growth by electron beam evaporation occurs in very different temperature ranges and fluence regimes. In particular, it is demonstrated that Ge growth occurs just above the eutectic temperature, while Si NWs growth occurs at temperature higher than the eutectic temperature, at about 450°C. Moreover, Si NWs growth requires a higher evaporated fluence before the NWs become to be visible. These differences arise in the different kinetics behaviors of these systems. The authors investigate the microscopic growth mechanisms elucidating the contribution of the adatoms diffusion as a function of the evaporated atoms direct impingement, demonstrating that adatoms play a key role in physical vapor deposition (PVD) NWs growth. The concept of incubation fluence, which is necessary for an interpretation of NWs growth in PVD growth conditions, is highlighted.

High-Efficiency Selective Electron Tunnelling in a Heterostructure Photovoltaic Diode.

PubMed

Jia, Chuancheng; Ma, Wei; Gu, Chunhui; Chen, Hongliang; Yu, Haomiao; Li, Xinxi; Zhang, Fan; Gu, Lin; Xia, Andong; Hou, Xiaoyuan; Meng, Sheng; Guo, Xuefeng

2016-06-08

A heterostructure photovoltaic diode featuring an all-solid-state TiO2/graphene/dye ternary interface with high-efficiency photogenerated charge separation/transport is described here. Light absorption is accomplished by dye molecules deposited on the outside surface of graphene as photoreceptors to produce photoexcited electron-hole pairs. Unlike conventional photovoltaic conversion, in this heterostructure both photoexcited electrons and holes tunnel along the same direction into graphene, but only electrons display efficient ballistic transport toward the TiO2 transport layer, thus leading to effective photon-to-electricity conversion. On the basis of this ipsilateral selective electron tunnelling (ISET) mechanism, a model monolayer photovoltaic device (PVD) possessing a TiO2/graphene/acridine orange ternary interface showed ∼86.8% interfacial separation/collection efficiency, which guaranteed an ultrahigh absorbed photon-to-current efficiency (APCE, ∼80%). Such an ISET-based PVD may become a fundamental device architecture for photovoltaic solar cells, photoelectric detectors, and other novel optoelectronic applications with obvious advantages, such as high efficiency, easy fabrication, scalability, and universal availability of cost-effective materials.

Effect of Coating Thickness on the Properties of TiN Coatings Deposited on Tool Steels Using Cathodic Arc Pvd Technique

NASA Astrophysics Data System (ADS)

Mubarak, A.; Akhter, Parvez; Hamzah, Esah; Mohd Toff, Mohd Radzi Hj.; Qazi, Ishtiaq A.

Titanium nitride (TiN) widely used as hard coating material, was coated on tool steels, namely on high-speed steel (HSS) and D2 tool steel by physical vapor deposition method. The study concentrated on cathodic arc physical vapor deposition (CAPVD), a technique used for the deposition of hard coatings for tooling applications, and which has many advantages. The main drawback of this technique, however, is the formation of macrodroplets (MDs) during deposition, resulting in films with rougher morphology. Various standard characterization techniques and equipment, such as electron microscopy, atomic force microscopy, hardness testing machine, scratch tester, and pin-on-disc machine, were used to analyze and quantify the following properties and parameters: surface morphology, thickness, hardness, adhesion, and coefficient of friction (COF) of the deposited coatings. Surface morphology revealed that the MDs produced during the etching stage, protruded through the TiN film, resulting in film with deteriorated surface features. Both coating thickness and indentation loads influenced the hardness of the deposited coatings. The coatings deposited on HSS exhibit better adhesion compared to those on D2 tool steel. Standard deviation indicates that the coating deposited with thickness around 6.7 μm showed the most stable trend of COF versus sliding distance.

Hemocompatibility of Inorganic Physical Vapor Deposition (PVD) Coatings on Thermoplastic Polyurethane Polymers.

PubMed

Lackner, Juergen M; Waldhauser, Wolfgang; Hartmann, Paul; Bruckert, Franz; Weidenhaupt, Marianne; Major, Roman; Sanak, Marek; Wiesinger, Martin; Heim, Daniel

2012-04-17

Biocompatibility improvements for blood contacting materials are of increasing interest for implanted devices and interventional tools. The current study focuses on inorganic (titanium, titanium nitride, titanium oxide) as well as diamond-like carbon (DLC) coating materials on polymer surfaces (thermoplastic polyurethane), deposited by magnetron sputtering und pulsed laser deposition at room temperature. DLC was used pure (a-C:H) as well as doped with silicon, titanium, and nitrogen + titanium (a-C:H:Si, a-C:H:Ti, a-C:H:N:Ti). In-vitro testing of the hemocompatibility requires mandatory dynamic test conditions to simulate in-vivo conditions, e.g., realized by a cone-and-plate analyzer. In such tests, titanium- and nitrogen-doped DLC and titanium nitride were found to be optimally anti-thrombotic and better than state-of-the-art polyurethane polymers. This is mainly due to the low tendency to platelet microparticle formation, a high content of remaining platelets in the whole blood after testing and low concentration of platelet activation and aggregation markers. Comparing this result to shear-flow induced cell motility tests with e.g., Dictostelium discoideum cell model organism reveals similar tendencies for the investigated materials.

Hemocompatibility of Inorganic Physical Vapor Deposition (PVD) Coatings on Thermoplastic Polyurethane Polymers

PubMed Central

Lackner, Juergen M.; Waldhauser, Wolfgang; Hartmann, Paul; Bruckert, Franz; Weidenhaupt, Marianne; Major, Roman; Sanak, Marek; Wiesinger, Martin; Heim, Daniel

2012-01-01

Biocompatibility improvements for blood contacting materials are of increasing interest for implanted devices and interventional tools. The current study focuses on inorganic (titanium, titanium nitride, titanium oxide) as well as diamond-like carbon (DLC) coating materials on polymer surfaces (thermoplastic polyurethane), deposited by magnetron sputtering und pulsed laser deposition at room temperature. DLC was used pure (a-C:H) as well as doped with silicon, titanium, and nitrogen + titanium (a-C:H:Si, a-C:H:Ti, a-C:H:N:Ti). In-vitro testing of the hemocompatibility requires mandatory dynamic test conditions to simulate in-vivo conditions, e.g., realized by a cone-and-plate analyzer. In such tests, titanium- and nitrogen-doped DLC and titanium nitride were found to be optimally anti-thrombotic and better than state-of-the-art polyurethane polymers. This is mainly due to the low tendency to platelet microparticle formation, a high content of remaining platelets in the whole blood after testing and low concentration of platelet activation and aggregation markers. Comparing this result to shear-flow induced cell motility tests with e.g., Dictostelium discoideum cell model organism reveals similar tendencies for the investigated materials. PMID:24955532

Ultrasound imaging in an experimental model of fatty liver disease and cirrhosis in rats

PubMed Central

2010-01-01

Background Domestic dogs and cats are very well known to develop chronic hepatic diseases, including hepatic lipidosis and cirrhosis. Ultrasonographic examination is extensively used to detect them. However, there are still few reports on the use of the ultrasound B-mode scan in correlation with histological findings to evaluate diffuse hepatic changes in rodents, which represent the most important animal group used in experimental models of liver diseases. The purpose of this study was to determine the reliability of ultrasound findings in the assessment of fatty liver disease and cirrhosis when compared to histological results in Wistar rats by following up a murine model of chronic hepatic disease. Results Forty Wistar rats (30 treated, 10 controls) were included. Liver injury was induced by dual exposure to CCl4 and ethanol for 4, 8 and 15 weeks. Liver echogenicity, its correlation to the right renal cortex echogenicity, measurement of portal vein diameter (PVD) and the presence of ascites were evaluated and compared to histological findings of hepatic steatosis and cirrhosis. Liver echogenicity correlated to hepatic steatosis when it was greater or equal to the right renal cortex echogenicity, with a sensitivity of 90%, specificity of 100%, positive and negative predictive values of 100% and 76.9% respectively, and accuracy of 92.5%. Findings of heterogeneous liver echogenicity and irregular surface correlated to liver cirrhosis with a sensitivity of 70.6%, specificity of 100%, positive and negative predictive values of 100% and 82.1% respectively, and accuracy of 87.5%. PVD was significantly increased in both steatotic and cirrhotic rats; however, the later had greater diameters. PVD cut-off point separating steatosis from cirrhosis was 2.1 mm (sensitivity of 100% and specificity of 90.5%). One third of cirrhotic rats presented with ascites. Conclusion The use of ultrasound imaging in the follow-up of murine diffuse liver disease models is feasible and

Materials Coating Techniques

DTIC Science & Technology

1980-03-01

applications from decorative to utilitarian over significant segments of the engineering, chemical, nuclear , microelectronics, and related Industries. PVD...Thermal-control coating. Boron 2430 Cermet component, nuclear shielding and controlrod material; Carbide wear- and temperature-resistant. Calcium...Zirconium Oxide (Hafnia-Pree � Thermal-barrier coatings for nuclear applications. Lime Stabi!Aed) Zirconium 2563 Resistant to high-temperature

Hybrid Physical Vapor Deposition Instrument for Advanced Functional Multilayers and Materials

DTIC Science & Technology

2016-04-27

Hybrid Physical Vapor Deposition Instrument for Advanced Functional Multilayers and Materials PI Maria received support to construct a physical...vapor deposition (PVD) system that combines electron beam (e- beam) evaporation, magnetron sputtering, pulsed laser ablation, and ion-assisted deposition ...The instrumentation enables clean, uniform, and rapid deposition of a wide variety of metallic, semiconducting, and ceramic thin films with

Taking Your Show on the Road.

ERIC Educational Resources Information Center

Buchanan, Suzanne

1998-01-01

Describes a local interpretation program in New England that uses a motorcoach to take visitors on a day-long tour of several sites in the region. Explains how to create similar programs elsewhere and gives advice for preparing for the tour, orienting tour members, interpreting on the road, pacing tours over a day, and stopping at tour sites. (PVD)

Charles H. Winston and Confederate Sulfuric Acid.

ERIC Educational Resources Information Center

Riethmiller, Steven

1995-01-01

Describes the invention and use of a sulfuric acid chamber by Charles Henry Winston during the Civil War. This invention helped supply munitions for the South. Winston, who was President of the Richmond Female Institute in Virginia, constructed the chamber at his farm and was granted a patent by the Confederate Patent Office in 1863. (PVD)

Red Shoe-Blue Shoe: An Acid-Base Demonstration with a Fashionable Twist.

ERIC Educational Resources Information Center

Breyer, Arthur C.; Uzelmeier, Calvin E.

1998-01-01

Illustrates that acid-base indicators come in many forms and the reversible effects that acids and bases have on the colors of such indicators. An object is dyed in an indicator, which causes the object to turn dark blue at pH less than 3.0 to 5.0. Suggests using dyeable fabric shoes and other cotton articles. (PVD)

Cobb's Red Cabbage Indicator.

ERIC Educational Resources Information Center

Cobb, Vicki

1998-01-01

Describes the use of an indicator made from the pigment in red cabbage. Cabbage is grated then soaked in water. When the water is a strong red, the cabbage is strained out. The cabbage-juice indicator is then used to test for acids and bases. Includes a list of good foods to test for acidity and alkalinity. (PVD)

Chemistry Lab--Heat Capacity.

ERIC Educational Resources Information Center

Stern, Robert

1998-01-01

Explores measuring the specific heat of a metal ball. The ball is heated to a known temperature then placed in cold water. Students measure the temperature gain of the water in this investigation of the principle of Conservation of Energy. As a second task, students make a precise determination of the density of the ball. (PVD)

Investigation on the Physics and Microfluidics of the Decomposition of Hydrogen Peroxide in MEMS Microthrusters

DTIC Science & Technology

2017-05-23

YYYY)      24-05-2017 2. REPORT TYPE Final 3. DATES COVERED (From - To) 01 Dec 2015 to 30 Nov 2016 4. TITLE AND SUBTITLE Investigation on the Physics ... physics and microfluidics of the decomposition of H2O2 in MEMS µ-thrusters Funding Institution: USAF AFOSR EOARD Grant Number: FA9550-16-1-0081...PVD Physical Vapor Deposition UniBO University of Bologna DISTRIBUTION A. Approved for public release: distribution unlimited. Final Report Version

Moisture-Induced Delamination Video of an Oxidized Thermal Barrier Coating

NASA Technical Reports Server (NTRS)

Smialek, James L.; Zhu, Dongming; Cuy, Michael D.

2008-01-01

PVD TBC coatings were thermally cycled to near-failure at 1150 C. Normal failure occurred after 200-300 1-hr cycles with only moderate weight gains (0.5 mg/cm2). Delamination and buckling was often delayed until well after cooldown (desktop spallation), but could be instantly induced by the application of water drops, as shown in an accompanying video-recording. Moisture therefore plays a primary role in delayed desktop TBC failure. Hydrogen embrittlement is proposed as the underlying mechanism.

Increased Biocompatibility and Bioactivity after Energetic PVD Surface Treatments

PubMed Central

Mändl, Stephan

2009-01-01

Ion implantation, a common technology in semiconductor processing, has been applied to biomaterials since the 1960s. Using energetic ion bombardment, a general term which includes conventional ion implantation plasma immersion ion implantation (PIII) and ion beam assisted thin film deposition, functionalization of surfaces is possible. By varying and adjusting the process parameters, several surface properties can be attuned simultaneously. Extensive research details improvements in the biocompatibility, mainly by reducing corrosion rates and increasing wear resistance after surface modification. Recently, enhanced bioactivity strongly correlated with the surface topography and less with the surface chemistry has been reported, with an increased roughness on the nanometer scale induced by self-organisation processes during ion bombardment leading to faster cellular adhesion processes.

PVD coating for optical applications on temperature-resistant thermoplastics

NASA Astrophysics Data System (ADS)

Munzert, Peter; Schulz, Ulrike; Kaiser, Norbert

2004-02-01

The performance of the high temperature resistant polymers Pleximid, APEC and Ultrason as substrate materials in plasma-assisted physical vapor deposition processes was studied and compared with well-known thermoplastics for optical applications. Different effects of UV irradiation and plasma exposure on the polymers' optical features, surface energy and adhesion properties for oxide layers, typically used for interference multilayer coatings, are shown.

Investigation of PVdF active diaphragms for synthetic jets

NASA Astrophysics Data System (ADS)

Bailo, Kelly C.; Brei, Diann E.; Calkins, Frederick T.

2000-06-01

Current research has shown that aircraft can gain significant aerodynamic performance benefits by employing active flow control (AFC). One of the enabling technologies of AFC is the synthetic jet. Synthetic jets, also known as zero-net-mass flux actuators, act as bi-directional pumps injecting high momentum air into the local aerodynamic flow. Previous work has concentrated on high frequency synthetic jets based on piezoelectric active diaphragms such as Thunder actuators. Low frequency synthetic jets present a unique challenge requiring large displacements, which current technology has difficulty meeting. Boeing is investigating novel shaped low frequency synthetic jets that can modify the flow over fixed aircraft wings. This paper present the initial study of two promising active diaphragm concepts: a crescent shape and an opposing bender shape. These active diaphragms were numerically modeled utilizing the general-purpose finite element code ABAQUS. Using the ABAQUS results, the dynamic volume change within each jet was calculated and incorporated into an analytical linear Bernoulli model to predict the velocities and pressures at the nozzle. Simulations were performed to determine trends to assist in selection of prototype configurations. Prototypes of both diaphragm concepts were constructed from polyvinylidene fluoride and experimentally tested at Boeing with promising results.

Software Design Document PVD CSCI (3). Volume 2, Appendices

DTIC Science & Technology

1991-06-01

FUNCTION: Igeneric -type(Type, Overline) called~y: show Ioverline in overlineif.c, (null) boundary-action in ovline-func.c, (null) Ideparture-action in...2.8.2.2-22 Ideparture-action 2.8.2.2-28 ldeparturejabel 2.8.2.2-27 idone__create_action 2.8.2.2-39 igeneric -size 2.8.2.2-17 lgeneric-type, 2.8.2.2-24

Structural and optical properties of electron-beam-evaporated ZnSe 1- x Te x Ternary compounds with various Te contents

NASA Astrophysics Data System (ADS)

Suthagar, J.; Suthan Kissinger, N. J.; Sharli Nath, G. M.; Perumal, K.

2014-01-01

ZnSe1- x Te x films with different tellurium (Te) contents were deposited by using an electron beam (EB) evaporation technique onto glass substrates for applications to optoelectronic devices. The structural and the optical properties of the ZnSe1- x Te x films were studied in the present work. The host material ZnSe1- x Te x , were prepared by using the physical vapor deposition method of the electron beam evaporation technique (PVD: EBE) under a pressure of 1 × 10-5 mbar. The X-ray diffractogram indicated that these alloy films had cubic structure with a strong preferential orientation of the crystallites along the (1 1 1) direction. The optical properties showed that the band gap (E g ) values varied from 2.73 to 2.41 eV as the tellurium content varied from 0.2 to 0.8. Thus the material properties can be altered and excellently controlled by controlling the system composition x.

Electron impact excitation of the q{sup 1}S {r_arrow}n{sup 1}P (n=3,4) transitions in helium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khakoo, M.A.; Rugamas, F.; Roundy, D.

1996-05-01

Experimental differential cross-section (DCS) ratios for the above transitions to the 1{sup 1}S {r_arrow} 2{sup 1}P transition are reported at impact energies of 30eV, 40eV and 80eV and scattering angles in the range of 5{degrees} to 130{degrees}. The data are an extension of previously reported work using the electron-photon coincidence method in the VUV. The DCS ratios are normalized to available absolute DCSs for the 1{sup 1}S {r_arrow} 2{sup 1}P transition and the resulting n{sup 1}P DCSs are compared to previous semi-empirical DCSs as well as available theory.

The periplasmic transaminase PtaA of Pseudomonas fluorescens converts the glutamic acid residue at the pyoverdine fluorophore to α-ketoglutaric acid.

PubMed

Ringel, Michael T; Dräger, Gerald; Brüser, Thomas

2017-11-10

The periplasmic conversion of ferribactin to pyoverdine is essential for siderophore biogenesis in fluorescent pseudomonads, such as pathogenic Pseudomonas aeruginosa or plant growth-promoting Pseudomonas fluorescens The non-ribosomal peptide ferribactin undergoes cyclizations and oxidations that result in the fluorophore, and a strictly conserved fluorophore-bound glutamic acid residue is converted to a range of variants, including succinamide, succinic acid, and α-ketoglutaric acid residues. We recently discovered that the pyridoxal phosphate-containing enzyme PvdN is responsible for the generation of the succinamide, which can be hydrolyzed to succinic acid. Based on this, a distinct unknown enzyme was postulated to be responsible for the conversion of the glutamic acid to α-ketoglutaric acid. Here we report the identification and characterization of this enzyme in P. fluorescens strain A506. In silico analyses indicated a periplasmic transaminase in fluorescent pseudomonads and other proteobacteria that we termed PtaA for " p eriplasmic t ransaminase A " An in-frame-deleted ptaA mutant selectively lacked the α-ketoglutaric acid form of pyoverdine, and recombinant PtaA complemented this phenotype. The ptaA / pvdN double mutant produced exclusively the glutamic acid form of pyoverdine. PtaA is homodimeric and contains a pyridoxal phosphate cofactor. Mutation of the active-site lysine abolished PtaA activity and affected folding as well as Tat-dependent transport of the enzyme. In pseudomonads, the occurrence of ptaA correlates with the occurrence of α-ketoglutaric acid forms of pyoverdines. As this enzyme is not restricted to pyoverdine-producing bacteria, its catalysis of periplasmic transaminations is most likely a general tool for specific biosynthetic pathways. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

Lusztig symmetries and Poincare-Birkhoff-Witt basis for wU{sub r,s}{sup d}(osp(1|2n))

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Junli; College of Applied Sciences, Beijing University of Technology, Beijing 100124; Yang, Shilin

2013-12-15

We investigate a new kind of two-parameter weak quantized superalgebra wU{sub r,s}{sup d}(osp(1|2n)), which is a weak Hopf superalgebra. It has a homomorphic image which is isomorphic to the usual two-parameter quantum superalgebra U{sub r,s}(osp(1|2n)) of osp(1|2n). We also discuss the basis of wU{sub r,s}{sup d}(osp(1|2n)) by Lusztig's symmetries.

Gold Rush!

ERIC Educational Resources Information Center

Brahier, Daniel J.

1997-01-01

Describes a mathematical investigation of gold--how it is weighed, stored, used, and valued. For grades 3-4, children estimate the value of treasure chests filled with gold coins and explore the size and weight of gold bars. Children in grades 5-6 explore how gold is mined and used, and how the value of gold changes over time. (PVD)

The A [plus] B [double arrow] C of Chemical Thermodynamics.

ERIC Educational Resources Information Center

Gerhartl, F. J.

1994-01-01

Basic chemical thermodynamics usually treats non-p,T reactions in a stepmotherly fashion. This paper covers the main aspects of the theoretical principles of reactions (p,T; V,T; p,H; and V,U) and offers results from the ABC computer program, which was designed to show the validity of the equilibrium theory to all types of reaction modes. (PVD)

Hybrid Physical Vapor Deposition Instrument for Advanced Functional Multilayers and Materials

DTIC Science & Technology

2016-04-27

Hybrid Physical Vapor Deposition Instrument for Advanced Functional Multilayers and Materials PI Maria received support to construct a physical... vapor deposition (PVD) system that combines electron beam (e- beam) evaporation, magnetron sputtering, pulsed laser ablation, and ion-assisted deposition ...peer-reviewed journals: Number of Papers published in non peer-reviewed journals: Final Report: Hybrid Physical Vapor Deposition Instrument for Advanced

Multiple pulse nanosecond laser induced damage threshold on hybrid mirrors

NASA Astrophysics Data System (ADS)

Vanda, Jan; Muresan, Mihai-George; Bilek, Vojtech; Sebek, Matej; Hanus, Martin; Lucianetti, Antonio; Rostohar, Danijela; Mocek, Tomas; Škoda, Václav

2017-11-01

So-called hybrid mirrors, consisting of broadband metallic surface coated with dielectric reflector designed for specific wavelength, becoming more important with progressing development of broadband mid-IR sources realized using parametric down conversion system. Multiple pulse nanosecond laser induced damage on such mirrors was tested by method s-on-1, where s stands for various numbers of pulses. We show difference in damage threshold between common protected silver mirrors and hybrid silver mirrors prepared by PVD technique and their variants prepared by IAD. Keywords: LIDT,

Resolution of 1-n-butyl-3-methyl-3-phospholene 1-oxide with TADDOL derivatives and calcium salts of O,O'-Dibenzoyl-(2R,3R)- or O,O'-di-p-toluoyl-(2R,3R)-tartaric acid.

PubMed

Bagi, Péter; Fekete, András; Kállay, Mihály; Hessz, Dóra; Kubinyi, Miklós; Holczbauer, Tamás; Czugler, Mátyás; Fogassy, Elemér; Keglevich, György

2014-03-01

The resolution methods applying (-)-(4R,5R)-4,5-bis(diphenylhydroxymethyl)-2,2-dimethyldioxolane ("TADDOL"), (-)-(2R,3R)-α,α,α',α'-tetraphenyl-1,4-dioxaspiro[4.5]decan-2,3-dimethanol ("spiro-TADDOL"), as well as the acidic and neutral Ca(2+) salts of (-)-O,O'-dibenzoyl- and (-)-O,O'-di-p-toluoyl-(2R,3R)-tartaric acid were extended for the preparation of 1-n-butyl-3-methyl-3-phospholene 1-oxide in optically active form. In one case, the intermediate diastereomeric complex could be identified by single-crystal X-ray analysis. The absolute P-configuration of the enantiomers of the phospholene oxide was also determined by comparing the experimentally obtained and calculated CD spectra. © 2014 Wiley Periodicals, Inc.

Effect of Modified Nanoclay Composite on Blended PVDF/PEG Electrolyte Membranes for Fuel Cell Applications

NASA Astrophysics Data System (ADS)

Bahavan Palani, P.; Sainul Abidin, K.; Kannan, R.; Rajashabala, S.

This research work describes the fabrication of polymer blend nanocomposite membranes using the solution casting method. These membranes were fabricated with Poly (Vinylidene Fluoride) (PVdF) as host, Poly (Ethylene Glycol) (PEG) in steps of 2wt.% as blending polymer and Montmorillonite (MMT) nanoclay particles in steps of 3wt.% which were used as received. The protonated MMT was synthesized through an ion exchange process with column chromatographic technique. The prepared membrane’s performance was investigated using different characterization techniques of Thermo Gravimetric Analysis (TGA), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), water uptake, IEC and electrochemical impedance spectroscopy. Thermal stability was decreased while adding PEG into PVDF but it is controlled with the addition of MMT on PVDF/PEG blend matrix. Moreover, It is noticed that, the increase of water uptake, IEC by the increasing additive concentration of PEG and MMT. XRD studies reveal the increased amorphous phase with uniform exfoliation of nanoclay particles. The highest proton conductivity value of 0.127S cm‑1 is obtained with 9wt.% of MMT in the PVdF/PEG/MMT composite membranes at room temperature with 100% Relative Humid (RH) condition and 10 V.% of sulfonation. The blended nanocomposite membranes fulfill the requirements of proton exchange membrane for fuel cell application.

Evaluation of model-predicted hazardous air pollutants (HAPs) near a mid-sized U.S. airport

NASA Astrophysics Data System (ADS)

Vennam, Lakshmi Pradeepa; Vizuete, William; Arunachalam, Saravanan

2015-10-01

Accurate modeling of aircraft-emitted pollutants in the vicinity of airports is essential to study the impact on local air quality and to answer policy and health-impact related issues. To quantify air quality impacts of airport-related hazardous air pollutants (HAPs), we carried out a fine-scale (4 × 4 km horizontal resolution) Community Multiscale Air Quality model (CMAQ) model simulation at the T.F. Green airport in Providence (PVD), Rhode Island. We considered temporally and spatially resolved aircraft emissions from the new Aviation Environmental Design Tool (AEDT). These model predictions were then evaluated with observations from a field campaign focused on assessing HAPs near the PVD airport. The annual normalized mean error (NME) was in the range of 36-70% normalized mean error for all HAPs except for acrolein (>70%). The addition of highly resolved aircraft emissions showed only marginally incremental improvements in performance (1-2% decrease in NME) of some HAPs (formaldehyde, xylene). When compared to a coarser 36 × 36 km grid resolution, the 4 × 4 km grid resolution did improve performance by up to 5-20% NME for formaldehyde and acetaldehyde. The change in power setting (from traditional International Civil Aviation Organization (ICAO) 7% to observation studies based 4%) doubled the aircraft idling emissions of HAPs, but led to only a 2% decrease in NME. Overall modeled aircraft-attributable contributions are in the range of 0.5-28% near a mid-sized airport grid-cell with maximum impacts seen only within 4-16 km from the airport grid-cell. Comparison of CMAQ predictions with HAP estimates from EPA's National Air Toxics Assessment (NATA) did show similar annual mean concentrations and equally poor performance. Current estimates of HAPs for PVD are a challenge for modeling systems and refinements in our ability to simulate aircraft emissions have made only incremental improvements. Even with unrealistic increases in HAPs aviation emissions the model

Long-term increase in mVEGF164 in mouse hindlimb muscle mediated by phage phiC31 integrase after nonviral DNA delivery.

PubMed

Portlock, Joylette L; Keravala, Annahita; Bertoni, Carmen; Lee, Solomon; Rando, Thomas A; Calos, Michele P

2006-08-01

Peripheral vascular disease (PVD), characterized by insufficient blood supply to extremities, can be a devastating illness. Although many gene therapy strategies for PVD using vascular endothelial growth factor (VEGF) have resulted in increased blood vessel formation, the vessels are often impermanent and regress after therapy, probably because of the short-lived VEGF expression mediated by gene therapy vectors (14 days or less). phiC31 integrase is a recombinase originally isolated from a bacteriophage of Streptomyces. This integrase performs efficient chromosomal integration of plasmid DNA into mammalian genomes that results in long-term transgene expression. In this study, gene transfer was achieved by intramuscular injection of VEGF and integrase plasmid DNAs into the tibialis anterior muscle in the mouse hindlimb, followed by electroporation of the muscle with needle electrodes. We observed VEGF levels significantly above background 40 days after injection in animals that received phiC31 integrase and the VEGF plasmid. Site-specific integration of plasmid DNA in the chromosomes of muscle tissue was verified by polymerase chain reaction at a common integration site. These results suggest the possible utility of the phiC31 integrase system to treat ischemic disease.

Fabrication of nanostructure by physical vapor deposition with glancing angle deposition technique and its applications

NASA Astrophysics Data System (ADS)

Horprathum, M.; Eiamchai, P.; Kaewkhao, J.; Chananonnawathorn, C.; Patthanasettakul, V.; Limwichean, S.; Nuntawong, N.; Chindaudom, P.

2014-09-01

A nanostructural thin film is one of the highly exploiting research areas particularly in applications in sensor, photocatalytic, and solar-cell technologies. In the past two decades, the integration of glancing-angle deposition (GLAD) technique to physical vapor deposition (PVD) process has gained significant attention for well-controlled multidimensional nanomorphologies because of fast, simple, cost-effective, and mass-production capability. The performance and functional properties of the coated thin films generally depend upon their nanostructural compositions, i.e., large aspect ratio, controllable porosity, and shape. Such structural platforms make the fabricated thin films very practical for several realistic applications. We therefore present morphological and nanostructural properties of various deposited materials, which included metals, i.e., silver (Ag), and oxide compounds, i.e., tungsten oxide (WO3), titanium dioxide (TiO2), and indium tin oxide (ITO). Different PVD techniques based on DC magnetron sputtering and electron-beam evaporation, both with the integrated GLAD component, were discussed. We further explore engineered nanostructures which enable controls of optical, electrical, and mechanical properties. These improvements led to several practical applications in surface-enhanced Raman, smart windows, gas sensors, self-cleaning materials and transparent conductive oxides (TCO).

The development and characterization of advanced broadband mirror coatings for the far-UV

NASA Astrophysics Data System (ADS)

Egan, Arika; Fleming, Brian T.; Wiley, James; Quijada, Manuel; Del Hoyo, Javier; Hennessy, John; Hicks, Brian; France, Kevin; Kruczek, Nicholas; Erickson, Nicholas

2017-08-01

We present a progress report on the development of new broadband mirror coatings that demonstrate > 80% reflectivities from 1020-5000Å. Four different coating recipes are presented as candidates for future far-ultraviolet (FUV) sensitive broadband observatories. Three samples were first coated with aluminum (Al) and lithium fluoride (LiF) at the NASA Goddard Space Flight Center (GSFC) using a new high-temperature physical vapor deposition (PVD) process. Two of these samples then had an ultrathin (10-20 Å) protective coat of either magnesium fluoride (MgF2) or aluminum fluoride (AlF3) applied using atomic later deposition (ALD) at the NASA Jet Propulsion Laboratory (JPL). A fourth sample was coated with Al and a similar high temperature PVD coating of AlF3. Polarized reflectivities into the FUV for each sample were obtained through collaboration with the Synchrotron Ultraviolet Radiation Facility at the National Institute of Standards and Technology. We present a procedure for using these reflectivities as a baseline for calculating the optical constants of each coating recipe. Given these results, we describe plans for improving our measurement methodology and techniques to develop and characterize these coating recipes for future FUV missions.

Prevalence of middle cerebral artery stenosis in asymptomatic subjects of more than 40 years age group: a transcranial Doppler study.

PubMed

Sada, Sujay; Reddy, Yugandhar; Rao, Sampath; Alladi, Suvarna; Kaul, Subash

2014-01-01

Middle cerebral artery (MCA) disease is the most common vascular lesion in stroke. Transcranial Doppler (TCD) is a non-invasive bedside screening method for assessing cerebral blood flow. To investigate the prevalence of MCA stenosis in asymptomatic but high-risk individuals for stroke. Prospective study between December 2011 and December 2013. Vascular risk factors considered included: hypertension (HTN), diabetes mellitus, smoking, alcohol consumption, coronary artery disease (CAD), peripheral vascular disease (PVD), hypercholesterolemia and obesity. TCD was performed with portable machine through the temporal windows by use of a standardized protocol. Of the 427 subjects, 374 were analyzed; males 264 (70.6%) and females 110 (29.4%). Mean age was 54.2 ± 7.6 years. The frequency of the risk factors was: HTN 287 (76.7%), diabetes 220 (58.8%), CAD 120 (32.1%), hypercholesterolemia 181 (48.4%), smoking 147 (39.3%), alcohol 99 (26.5%), obesity 198 (52.9%) and PVD 8 (2.1%). Of the 374 subjects, 27 (7.2%) had intracranial arterial stenosis and the rest had normal intracranial arteries. On univariate analysis, subjects with higher age, HTN, CAD, smoking and hypercholesterolemia had higher risk of having intracranial arterial stenosis (P < 0.05). Multivariate analysis showed HTN and CAD are independent risk factors for intracranial arterial stenosis. Overall prevalence of intracranial arterial stenosis is 7.2% in high-risk population sample from Hyderabad in South India. HTN and CAD are independent risk factors for the development of intracranial arterial stenosis.

In Vivo-Induced Genes in Pseudomonas aeruginosa

PubMed Central

Handfield, Martin; Lehoux, Dario E.; Sanschagrin, François; Mahan, Michael J.; Woods, Donald E.; Levesque, Roger C.

2000-01-01

In vivo expression technology was used for testing Pseudomonas aeruginosa in the rat lung model of chronic infection and in a mouse model of systemic infection. Three of the eight ivi proteins found showed sequence identity to known virulence factors involved in iron acquisition via an open reading frame (called pvdI) implicated in pyoverdine biosynthesis, membrane biogenesis (FtsY), and adhesion (Hag2). PMID:10722644

Electrochemical Behavior and Surface Chemistry of Aluminum Alloys: Solute-Rich Interphase Model

DTIC Science & Technology

1993-03-31

physical vapor deposition ( PVD ). Several different mechanisms have been proposed to explain the passivity of stainless aluminum alloys, including...flat-cell model K0235), which simplified the mounting of the specimens since no lead wire attachment or coating of the specimens were required. The...reasons. First, depending on when the particles were ejected and whether they were subsequently coated with the alloy, their presence could establish

iMAST Quarterly, Number 3, 2000

DTIC Science & Technology

2000-01-01

components which depend on evaporating unit capabilities. There are three components (EB-gun, water cooled copper crucible and vacuum chamber) in the EB-PVD...Ion Implantation and Ion Plating electromagnetic deflected through 180 or 2700. Similarly, evaporant material is placed in a water-cooled copper ... crucible , which could be either pocket type for small quantity evaporation application or continuous ingot feeding through the crucible for larger quantity

Moisture-Induced Delamination Video of an Oxidized Thermal Barrier Coating

NASA Technical Reports Server (NTRS)

Smialek, James L.; Zhu, Dongming; Cuy, Michael D.

2008-01-01

PVD TBC coatings were thermally cycled to near-failure at 1150 C. Normal failure occurred after 200 to 300 1-hr cycles with only moderate weight gains (0.5 mg/sq cm). Delamination and buckling was often delayed until well after cooldown (desktop spallation), but could be instantly induced by the application of water drops, as shown in a video clip which can be viewed by clicking on figure 2 of this report. Moisture therefore plays a primary role in delayed desktop TBC failure. Hydrogen embrittlement is proposed as the underlying mechanism.

Modeling physical vapor deposition of energetic materials

DOE PAGES

Shirvan, Koroush; Forrest, Eric C.

2018-03-28

Morphology and microstructure of organic explosive films formed using physical vapor deposition (PVD) processes strongly depends on local surface temperature during deposition. Currently, there is no accurate means of quantifying the local surface temperature during PVD processes in the deposition chambers. This study focuses on using a multiphysics computational fluid dynamics tool, STARCCM+, to simulate pentaerythritol tetranitrate (PETN) deposition. The PETN vapor and solid phase were simulated using the volume of fluid method and its deposition in the vacuum chamber on spinning silicon wafers was modeled. The model also included the spinning copper cooling block where the wafers are placedmore » along with the chiller operating with forced convection refrigerant. Implicit time-dependent simulations in two- and three-dimensional were performed to derive insights in the governing physics for PETN thin film formation. PETN is deposited at the rate of 14 nm/s at 142.9 °C on a wafer with an initial temperature of 22 °C. The deposition of PETN on the wafers was calculated at an assumed heat transfer coefficient (HTC) of 400 W/m 2 K. This HTC proved to be the most sensitive parameter in determining the local surface temperature during deposition. Previous experimental work found noticeable microstructural changes with 0.5 mm fused silica wafers in place of silicon during the PETN deposition. This work showed that fused silica slows initial wafer cool down and results in ~10 °C difference for the surface temperature at 500 μm PETN film thickness. It was also found that the deposition surface temperature is insensitive to the cooling power of the copper block due to the copper block's very large heat capacity and thermal conductivity relative to the heat input from the PVD process. Future work should incorporate the addition of local stress during PETN deposition. Lastly, based on simulation results, it is also recommended to investigate the impact of wafer

Modeling physical vapor deposition of energetic materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shirvan, Koroush; Forrest, Eric C.

Morphology and microstructure of organic explosive films formed using physical vapor deposition (PVD) processes strongly depends on local surface temperature during deposition. Currently, there is no accurate means of quantifying the local surface temperature during PVD processes in the deposition chambers. This study focuses on using a multiphysics computational fluid dynamics tool, STARCCM+, to simulate pentaerythritol tetranitrate (PETN) deposition. The PETN vapor and solid phase were simulated using the volume of fluid method and its deposition in the vacuum chamber on spinning silicon wafers was modeled. The model also included the spinning copper cooling block where the wafers are placedmore » along with the chiller operating with forced convection refrigerant. Implicit time-dependent simulations in two- and three-dimensional were performed to derive insights in the governing physics for PETN thin film formation. PETN is deposited at the rate of 14 nm/s at 142.9 °C on a wafer with an initial temperature of 22 °C. The deposition of PETN on the wafers was calculated at an assumed heat transfer coefficient (HTC) of 400 W/m 2 K. This HTC proved to be the most sensitive parameter in determining the local surface temperature during deposition. Previous experimental work found noticeable microstructural changes with 0.5 mm fused silica wafers in place of silicon during the PETN deposition. This work showed that fused silica slows initial wafer cool down and results in ~10 °C difference for the surface temperature at 500 μm PETN film thickness. It was also found that the deposition surface temperature is insensitive to the cooling power of the copper block due to the copper block's very large heat capacity and thermal conductivity relative to the heat input from the PVD process. Future work should incorporate the addition of local stress during PETN deposition. Lastly, based on simulation results, it is also recommended to investigate the impact of wafer

Extrinsic Repair of Injured Dendrites as a Paradigm for Regeneration by Fusion in Caenorhabditis elegans

PubMed Central

Oren-Suissa, Meital; Gattegno, Tamar; Kravtsov, Veronika; Podbilewicz, Benjamin

2017-01-01

Injury triggers regeneration of axons and dendrites. Research has identified factors required for axonal regeneration outside the CNS, but little is known about regeneration triggered by dendrotomy. Here, we study neuronal plasticity triggered by dendrotomy and determine the fate of complex PVD arbors following laser surgery of dendrites. We find that severed primary dendrites grow toward each other and reconnect via branch fusion. Simultaneously, terminal branches lose self-avoidance and grow toward each other, meeting and fusing at the tips via an AFF-1-mediated process. Ectopic branch growth is identified as a step in the regeneration process required for bypassing the lesion site. Failure of reconnection to the severed dendrites results in degeneration of the distal end of the neuron. We discover pruning of excess branches via EFF-1 that acts to recover the original wild-type arborization pattern in a late stage of the process. In contrast, AFF-1 activity during dendritic auto-fusion is derived from the lateral seam cells and not autonomously from the PVD neuron. We propose a model in which AFF-1-vesicles derived from the epidermal seam cells fuse neuronal dendrites. Thus, EFF-1 and AFF-1 fusion proteins emerge as new players in neuronal arborization and maintenance of arbor connectivity following injury in Caenorhabditis elegans. Our results demonstrate that there is a genetically determined multi-step pathway to repair broken dendrites in which EFF-1 and AFF-1 act on different steps of the pathway. EFF-1 is essential for dendritic pruning after injury and extrinsic AFF-1 mediates dendrite fusion to bypass injuries. PMID:28283540

Extrinsic Repair of Injured Dendrites as a Paradigm for Regeneration by Fusion in Caenorhabditis elegans.

PubMed

Oren-Suissa, Meital; Gattegno, Tamar; Kravtsov, Veronika; Podbilewicz, Benjamin

2017-05-01

Injury triggers regeneration of axons and dendrites. Research has identified factors required for axonal regeneration outside the CNS, but little is known about regeneration triggered by dendrotomy. Here, we study neuronal plasticity triggered by dendrotomy and determine the fate of complex PVD arbors following laser surgery of dendrites. We find that severed primary dendrites grow toward each other and reconnect via branch fusion. Simultaneously, terminal branches lose self-avoidance and grow toward each other, meeting and fusing at the tips via an AFF-1-mediated process. Ectopic branch growth is identified as a step in the regeneration process required for bypassing the lesion site. Failure of reconnection to the severed dendrites results in degeneration of the distal end of the neuron. We discover pruning of excess branches via EFF-1 that acts to recover the original wild-type arborization pattern in a late stage of the process. In contrast, AFF-1 activity during dendritic auto-fusion is derived from the lateral seam cells and not autonomously from the PVD neuron. We propose a model in which AFF-1-vesicles derived from the epidermal seam cells fuse neuronal dendrites. Thus, EFF-1 and AFF-1 fusion proteins emerge as new players in neuronal arborization and maintenance of arbor connectivity following injury in Caenorhabditis elegans Our results demonstrate that there is a genetically determined multi-step pathway to repair broken dendrites in which EFF-1 and AFF-1 act on different steps of the pathway. EFF-1 is essential for dendritic pruning after injury and extrinsic AFF-1 mediates dendrite fusion to bypass injuries. Copyright © 2017 by the Genetics Society of America.

A difference in using atomic layer deposition or physical vapour deposition TiN as electrode material in metal-insulator-metal and metal-insulator-silicon capacitors.

PubMed

Groenland, A W; Wolters, R A M; Kovalgin, A Y; Schmitz, J

2011-09-01

In this work, metal-insulator-metal (MIM) and metal-insulator-silicon (MIS) capacitors are studied using titanium nitride (TiN) as the electrode material. The effect of structural defects on the electrical properties on MIS and MIM capacitors is studied for various electrode configurations. In the MIM capacitors the bottom electrode is a patterned 100 nm TiN layer (called BE type 1), deposited via sputtering, while MIS capacitors have a flat bottom electrode (called BE type 2-silicon substrate). A high quality 50-100 nm thick SiO2 layer, made by inductively-coupled plasma CVD at 150 degrees C, is deposited as a dielectric on top of both types of bottom electrodes. BE type 1 (MIM) capacitors have a varying from low to high concentration of structural defects in the SiO2 layer. BE type 2 (MIS) capacitors have a low concentration of structural defects and are used as a reference. Two sets of each capacitor design are fabricated with the TiN top electrode deposited either via physical vapour deposition (PVD, i.e., sputtering) or atomic layer deposition (ALD). The MIM and MIS capacitors are electrically characterized in terms of the leakage current at an electric field of 0.1 MV/cm (I leak) and for different structural defect concentrations. It is shown that the structural defects only show up in the electrical characteristics of BE type 1 capacitors with an ALD TiN-based top electrode. This is due to the excellent step coverage of the ALD process. This work clearly demonstrates the sensitivity to process-induced structural defects, when ALD is used as a step in process integration of conductors on insulation materials.

[Pandemic influenza A (H1N1)v vaccination status and factors affecting vaccination: Ankara and Diyarbakır 2009 data from Turkey].

PubMed

Ertek, Mustafa; Sevencan, Funda; Kalaycıoğlu, Handan; Gözalan, Ayşegül; Simşek, Ciğdem; Culha, Gönül; Dorman, Vedat; Ozlü, Ahmet; Arıkan, Füsun; Aktaş, Dilber; Akın, Levent; Korukluoğlu, Gülay; Sevindi, Demet Furkan

2011-10-01

In this study, it was aimed to determine the frequency of the symptoms of influenza-like illness during influenza A (H1N1)v pandemic in two provinces where sentinel influenza surveillance was conducted and also to obtain opinions about H1N1 influenza and vaccination, H1N1 vaccination status and factors affecting vaccination. This cross-sectional study was conducted in the provinces of Ankara (capital city, located at Central Anatolia) and Diyarbakır (located at southeastern Anatolia). It was planned to include 455 houses in Ankara and 276 houses in Diyarbakır. The household participation rate in the study was 78.9% and 53.6% for Ankara and Diyarbakır, respectively. Our study was carried out between January-February 2010, with 1164 participants from Ankara and 804 from Diyarbakır, including every household subjects except for infants younger than 11 months and patients with primary/secondary immunodeficiency diseases. Data was collected by site teams consisting of a physician and a healthcare staff with informed consent. Of the participants 45.5% from Ankara and 35.3% from Diyarbakır stated that they had gone through an influenza-like illness. The most frequently indicated clinical symptoms were fatigue/weakness, rhinitis, sore throat and cough. The rates of admission to a physician with influenza like illness complaints were 50.6% and 58.7%; rates of hospitalization due to influenza-like illness were 1% and 1.5%, and rates of antiviral drug use were 3.8% and 1.9%, in Ankara ve Diyarbakır participants, respectively. The rate of personal precautions taken by the subjects for prevention from pandemic influenza were 59% and 53.3%, in Ankara and Diyarbakır, respectively. These precautions most frequently were "hand washing" and "avoiding crowded public areas". H1N1 influenza vaccine was applied in 9.3% of the participants in Ankara and in 3.7% of the participants in Diyarbakır. Vaccination rate was higher in both of the provinces in adults over 25 years old than

Temporally and Spatially Resolved Plasma Spectroscopy in Pulsed Laser Deposition of Ultra-Thin Boron Nitride Films (Postprint)

DTIC Science & Technology

2015-04-24

AFRL-RX-WP-JA-2016-0196 TEMPORALLY AND SPATIALLY RESOLVED PLASMA SPECTROSCOPY IN PULSED LASER DEPOSITION OF ULTRA-THIN BORON NITRIDE...AND SPATIALLY RESOLVED PLASMA SPECTROSCOPY IN PULSED LASER DEPOSITION OF ULTRA-THIN BORON NITRIDE FILMS (POSTPRINT) 5a. CONTRACT NUMBER FA8650...distributions within a PVD plasma plume ablated from a boron nitride (BN) target by a KrF laser at different pressures of nitrogen gas were investigated

Engineering Provision of Assault Crossing of Rivers,

DTIC Science & Technology

1983-01-21

in the first place, in the missile and nuclear weapons warfare sharply they increased frontage and the depth of troop dispositions in the defense...modern missile and nuclear weapons warfare the medium * and wide rivers, reinforced by mine fields and decomposition of water-engineering and other...PMP and transport motor pool PVD -20. The existing pontoon trains make it possible to mechanize labor-consuming fitters work, to the minimum to bring

Use of warfarin therapy among residents who developed venous thromboembolism in the nursing home.

PubMed

Reardon, Gregory; Pandya, Naushira; Nutescu, Edith A; Lamori, Joyce; Damaraju, Chandrasekhar V; Schein, Jeff; Bookhart, Brahim K

2012-12-01

Treatment of venous thromboembolism (VTE) in long-term care (LTC) settings has received little empirical study. Among residents with VTE in nursing homes, this analysis evaluated frequency of anticoagulant use, the proportion of residents newly started on warfarin who persisted on therapy (≥3 months), and the association of key resident characteristics, including bleeding risk, with warfarin use and persistence. Using the AnalytiCare LTC database (US), eligible residents had deep vein thrombosis or pulmonary embolism coded in the Minimum Data Set (MDS) 2.0 during the uptake period April 1, 2007 through December 31, 2008 (earliest VTE was index date) and had 1 or more MDS assessment(s) over the 90-day preindex period, each negative for VTE. Logistic regression evaluated the association of resident characteristics with warfarin use. Cox regression evaluated persistence with warfarin therapy. The median age of residents with VTE included in the analysis (N = 489) was 80 years; 73% received anticoagulant therapy and 66% were prescribed warfarin ±45 days of the index date. Multivariate logistic regression identified several factors significantly associated with warfarin use: location in South Central region (odds ratio [OR] = 1.94, P = 0.019) and the Western region (OR = 2.53, P = 0.005) [both vs reference South Atlantic]; body mass index categories normal (OR = 2.73, P = 0.045), overweight (OR = 4.21, P = 0.005), and obese (OR = 3.82, P = 0.010) (both vs reference underweight); Alzheimer's/dementia (OR = 0.52, P = 0.024); cancer (OR = 0.39, P = 0.008); and moderate-dependent versus independent physical functioning (OR = 2.59, P = 0.003). Of residents newly started on warfarin therapy with no history of cancer (n = 149), 28% discontinued warfarin within 90 days of initiation. Peripheral vascular disease (PVD) (OR = 4.07, P < 0.001), Alzheimer's disease/dementia (OR = 2.55, P = 0.046), and antipsychotic use (OR = 4.60, P < 0.001) were all significantly associated with

Tribo-electrochemical characterization of hafnium multilayer systems deposited on nitride/vanadium nitride AISI 4140 steel

NASA Astrophysics Data System (ADS)

Mora, M.; Vera, E.; Aperador, W.

2016-02-01

In this work is presented the synergistic behaviour among corrosion/wear (tribocorrosion) of the multilayer coatings hafnium nitride/vanadium nitride [HfN/VN]n. The multilayers were deposited on AISI 4140 steel using the technique of physical vapor deposition PVD magnetron sputtering, the tests were performed using a pin-on-disk tribometer, which has an adapted potentiostat galvanostat with three-electrode electrochemical cell. Tribocorrosive parameters such as: Friction coefficient between the coating and the counter body (100 Cr6 steel ball); Polarization resistance by means of electrochemical impedance spectroscopy technique and corrosion rate by polarization curves were determined. It was observed an increase in the polarization resistance, a decrease in the corrosion rate and a low coefficient of friction in comparison with the substrate, due to an increase on the number of bilayers.

Treating gynecological pain: the experiences of bachelor students in physiotherapy performing somatocognitive therapy.

PubMed

Fougner, Marit; Haugstad, Gro Killi

2015-07-01

Longstanding gynecological pain affects large numbers of women in the Western world. In recently published studies, we have found that a hybrid of physiotherapy and cognitive psychotherapy called somatocognitive therapy (SCT) ameliorates physical symptoms and psychological distress. In this paper, we report on the experiences of undergraduate physiotherapy students performing the therapy to patients with provoked vestibulodynia (PVD). The study aimed to investigate the nature of the collaborative interaction between female physiotherapy students and patients with PVD, focusing on critical factors for the students' learning of professional skills through SCT applied on patients suffering from an especially demanding pain condition. In a qualitative study design, data were collected from two group interviews with four female students in pairs, and subjected to a thematic analysis. We found that students perceive the patient encounter as critical incidents in the sense of strong emotional encounters. From the data material, there emerged a four-step process ranging from distance to proximity, highlighting factors that influence the development of professional skills. The four steps are defined respectively as: (1) the students' prejudices; (2) identification and empathy; (3) senses of responsibility in the therapeutic relationship and (4) collaborative engagement for change. Contrary to expectations, the students experienced the application of this combined approach (SCT) as an interesting and rewarding way of working with patients, and that they had achieved skills and a sufficient set of tools to cope with the challenges that patients with longstanding gynecological pain represent.

Time-dependent changes in the growth of ultrathin ionic liquid films on Ag(111).

PubMed

Lexow, Matthias; Talwar, Timo; Heller, Bettina S J; May, Benjamin; Bhuin, Radha G; Maier, Florian; Steinrück, Hans-Peter

2018-05-09

Various amounts of the ionic liquids (ILs) [C1C1Im][Tf2N] and [C8C1Im][Tf2N] were deposited in vacuo by physical vapour deposition (PVD) on single crystalline Ag(111) at room temperature and subsequently monitored by angle-resolved X-ray photoelectron spectroscopy (ARXPS) as a function of time. For very low coverages of up to one closed molecular layer, an initial wetting layer was rapidly formed for both ILs. Deposition of higher amounts of [C1C1Im][Tf2N] revealed an initial three-dimensional film morphology. On the time scale of hours, characteristic changes of the XPS signals were observed. These are interpreted as island spreading and a transformation towards a nearly two dimensional [C1C1Im][Tf2N] film as the final state. In contrast, a film morphology close to 2D was found from the very beginning for [C8C1Im][Tf2N] deposited on Ag(111) demonstrating the influence of the alkyl chain length on the growth kinetics. These studies also highlight the suitability of time-resolved ARXPS for the investigation of IL/solid interfaces, which play a crucial role in IL thin film applications such as in catalysis, sensor, lubrication, and coating technologies.

Effect of manufacturing process sequence on the corrosion resistance characteristics of coated metallic bipolar plates

NASA Astrophysics Data System (ADS)

Dur, Ender; Cora, Ömer Necati; Koç, Muammer

2014-01-01

Metallic bipolar plate (BPP) with high corrosion and low contact resistance, durability, strength, low cost, volume, and weight requirements is one of the critical parts of the PEMFC. This study is dedicated to understand the effect of the process sequence (manufacturing then coating vs. coating then manufacturing) on the corrosion resistance of coated metallic bipolar plates. To this goal, three different PVD coatings (titanium nitride (TiN), chromium nitride (CrN), zirconium nitride (ZrN)), with three thicknesses, (0.1, 0.5, 1 μm) were applied on BPPs made of 316L stainless steel alloy before and after two types of manufacturing (i.e., stamping or hydroforming). Corrosion test results indicated that ZrN coating exhibited the best corrosion protection while the performance of TiN coating was the lowest among the tested coatings and thicknesses. For most of the cases tested, in which coating was applied before manufacturing, occurrence of corrosion was found to be more profound than the case where coating was applied after manufacturing. Increasing the coating thickness was found to improve the corrosion resistance. It was also revealed that hydroformed BPPs performed slightly better than stamped BPPs in terms of the corrosion behavior.

Management of breech presentation at term: a retrospective cohort study of 10 years of experience.

PubMed

Burgos, J; Rodríguez, L; Cobos, P; Osuna, C; Del Mar Centeno, M; Larrieta, R; Martínez-Astorquiza, T; Fernández-Llebrez, L

2015-10-01

To evaluate the impact of management of childbirth (external cephalic version (ECV) plus planned vaginal delivery (PVD)) of breech presentation at term (⩾37 weeks of gestation). This retrospective cohort study was based on data collected of singleton breech presentations at term in the Obstetrics and Gynaecology Service, Cruces University Hospital (Biscay, Spain), from January 2003 to December 2012. We attended 2377 singleton breech pregnancies at term. We attended 1684 singleton breech term deliveries, attempting vaginal delivery after selection in 52.9% of cases and were successful in 57.5% of attempts. A total of 1360 ECV were attempted, with a success rate of 50.3% of those attempted. The use of ECV has decreased the rate of breech presentation at delivery by 39.0%, the rate of breech presentation as a caesarean section (CS) indication by 47.1% (CS due to breech presentation/total of CS) and the rate of CS for breech presentation out of the total of deliveries by 39.1% (CS due to breech presentation/total of deliveries). Early postnatal parameters (5-min Apgar score, umbilical cord arterial pH and acid-base analysis) were significantly lower following PVD compared with planned CS for breech presentation. However, we did not find any differences in the rates of admissions to the neonatal unit or neonatal mortality. Management of breech presentation with a protocol that includes ECV, careful selection criteria and active management of vaginal delivery achieve a great decrease in the rate of CS for breech presentation.

Effect of phase inversion on microporous structure development of Al 2O 3/poly(vinylidene fluoride-hexafluoropropylene)-based ceramic composite separators for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Jeong, Hyun-Seok; Kim, Dong-Won; Jeong, Yeon Uk; Lee, Sang-Young

To improve the thermal shrinkage of the separators that are essential to securing the electrical isolation between electrodes in lithium-ion batteries, we develop a new separator based on a ceramic composite membrane. Introduction of microporous, ceramic coating layers onto both sides of a polyethylene (PE) separator allows such a progress. The ceramic coating layers consist of nano-sized alumina (Al 2O 3) powders and polymeric binders (PVdF-HFP). The microporous structure of the ceramic coating layers is observed to be crucial to governing the thermal shrinkage as well as the ionic transport of the ceramic composite separators. This microporous structure is determined by controlling the phase inversion, more specifically, nonsolvent (water) contents in the coating solutions. To provide a theoretical basis for this approach, a pre-investigation on the phase diagram for a ternary mixture comprising PVdF-HFP, acetone, and water is conducted. On the basis of this observation, the effect of phase inversion on the morphology and air permeability (i.e. Gurley value) of ceramic coating layers is systematically discussed. In addition, to explore the application of ceramic composite separators to lithium-ion batteries, the influence of the structural change in the coating layers on the thermal shrinkage and electrochemical performance of the separators is quantitatively identified.

Diabetic Macular Edema: From Old Concepts to New Therapeutic Avenues

PubMed Central

Mansour, Ahmad M; Pulido, Jose S; Arevalo, J Fernando

2015-01-01

Diabetic macular edema (DME) is a significant cause of blindness in the working population and is currently challenging to treat. Current interventions include focal laser or intravitreal injections. This article outlines a new treatment protocol based on the theory that peripheral ischemia is the precursor to angiogenesis, which will ultimately gather its momentum at the fovea. Extreme peripheral light laser panretinal photocoagulation (PRP) back to the equator reduces excessive production of the vascular endothelial growth factor (VEGF) in the eye. This decreases VEGF-induced DME and provides long-term protection against the development of neovascularization. Initial exacerbation of DME often accompanies PRP. Therefore, injections of anti-VEGF agents (with or without dexamethasone implants) initially can forestall worsening of DME and prevent loss of vision. However, on the other hand, applying peripheral PRP and intraocular injections can induce posterior vitreous detachment (PVD). This could help release vitreomacular adhesions (VMA) and vitreomacular traction (VMT), thereby decreasing DME severity and improving the response to intravitreal injections. In the current approach, peripheral retinal photocoagulation should stop the drive for VEGF release; moreover, laser ablation should produce secondary, accidental, and beneficial PVD. This approach precludes focal laser therapy and paves the path for prolonged intervals between anti-VEGF therapy. PMID:27800500

TEM Observation of the Ti Interlayer Between SiC Substrates During Diffusion Bonding

NASA Technical Reports Server (NTRS)

Tsuda, Hiroshi; Mori, Shigeo; Halbig, Michael C.; Singh, Mori

2012-01-01

Diffusion bonding was carried out to join SiC to SiC substrates using titanium interlayers. In this study, 10 m and 20 m thick physical vapor deposited (PVD) Ti surface coatings, and 10 and 20 m thick Ti foils were used. Diffusion bonding was performed at 1250 C for PVD Ti coatings and 1200 C for Ti foil. This study investigates the microstructures of the phases formed during diffusion bonding through TEM and selected-area diffraction analysis of a sample prepared with an FIB, which allows samples to be taken from the reacted area. In all samples, Ti3SiC2, Ti5Si3Cx and TiSi2 phases were identified. In addition, TiC and unknown phases also appeared in the samples in which Ti foils were used as interlayers. Furthermore, Ti3SiC2 phases show high concentration and Ti5Si3Cx formed less when samples were processed at a higher temperature and thinner interlayer samples were used. It appears that the formation of microcracks is caused by the presence of intermediate phase Ti5Si3Cx, which has anisotropic thermal expansion, and by the presence of an unidentified Ti-Si-C ternary phase with relatively low Si content.

Bone marrow cells obtained from cirrhotic rats do not improve function or reduce fibrosis in a chronic liver disease model.

PubMed

Mannheimer, Elida Gripp; Quintanilha, Luiz Fernando; Carvalho, Adriana Bastos; Paredes, Bruno Diaz; Gonçalves de Carvalho, Felipe; Takyia, Cristina Maeda; Resende, Célia Maria Coelho; Ferreira da Motta Rezende, Guilherme; Campos de Carvalho, Antonio Carlos; Schanaider, Alberto; dos Santos Goldenberg, Regina Coeli

2011-01-01

The objective of this study was to evaluate the therapeutic potential of bone marrow cells (BMCs) obtained from cirrhotic donors in a model of chronic liver disease. Chronic liver injury was induced in female Wistar rats by the association of an alcoholic diet with intraperitoneal injections of carbon tetrachloride. BMCs obtained from cirrhotic donors or placebo were injected through the portal vein. Blood analysis of alanine aminotransferase (ALT) and albumin levels, ultrasound assessment including the measurement of the portal vein diameter (PVD) and liver echogenicity, histologic evaluation with hematoxylin and eosin and Sirius red staining, and quantification of collagen deposition were performed. ALT and albumin blood levels showed no significant differences between the experimental groups two months after injection. Additionally, no significant variation in PVD and liver echogenicity was found. Histological analysis also showed no significant variation in collagen deposition two months after placebo or BMC injection. This study suggests that, even though BMC therapy using cells from healthy donors has previously shown to be effective, this is not the case when BMCs are obtained from cirrhotic animals. This result has major clinical implications when considering the use of autologous BMCs from patients with chronic liver diseases. © 2009 John Wiley & Sons A/S.

Assessing Reliability of Cold Spray Sputter Targets in Photovoltaic Manufacturing

NASA Astrophysics Data System (ADS)

Hardikar, Kedar; Vlcek, Johannes; Bheemreddy, Venkata; Juliano, Daniel

2017-10-01

Cold spray has been used to manufacture more than 800 Cu-In-Ga (CIG) sputter targets for deposition of high-efficiency photovoltaic thin films. It is a preferred technique since it enables high deposit purity and transfer of non-equilibrium alloy states to the target material. In this work, an integrated approach to reliability assessment of such targets with deposit weight in excess of 50 lb. is undertaken, involving thermal-mechanical characterization of the material in as-deposited condition, characterization of the interface adhesion on cylindrical substrate in as-deposited condition, and developing means to assess target integrity under thermal-mechanical loads during the physical vapor deposition (PVD) sputtering process. Mechanical characterization of cold spray deposited CIG alloy is accomplished through the use of indentation testing and adaptation of Brazilian disk test. A custom lever test was developed to characterize adhesion along the cylindrical interface between the CIG deposit and cylindrical substrate, overcoming limitations of current standards. A cohesive zone model for crack initiation and propagation at the deposit interface is developed and validated using the lever test and later used to simulate the potential catastrophic target failure in the PVD process. It is shown that this approach enables reliability assessment of sputter targets and improves robustness.

HIP1 and HIP1r stabilize receptor tyrosine kinases and bind 3-phosphoinositides via epsin N-terminal homology domains.

PubMed

Hyun, Teresa S; Rao, Dinesh S; Saint-Dic, Djenann; Michael, L Evan; Kumar, Priti D; Bradley, Sarah V; Mizukami, Ikuko F; Oravecz-Wilson, Katherine I; Ross, Theodora S

2004-04-02

Huntingtin-interacting protein 1-related (HIP1r) is the only known mammalian relative of huntingtin-interacting protein 1 (HIP1), a protein that transforms fibroblasts via undefined mechanisms. Here we demonstrate that both HIP1r and HIP1 bind inositol lipids via their epsin N-terminal homology (ENTH) domains. In contrast to other ENTH domain-containing proteins, lipid binding is preferential to the 3-phosphate-containing inositol lipids, phosphatidylinositol 3,4-bisphosphate and phosphatidylinositol 3,5-bisphosphate. Furthermore, the HIP1r ENTH domain, like that of HIP1, is necessary for lipid binding, and expression of an ENTH domain-deletion mutant, HIP1r/deltaE, induces apoptosis. Consistent with the ability of HIP1r and HIP1 to affect cell survival, full-length HIP1 and HIP1r stabilize pools of growth factor receptors by prolonging their half-life following ligand-induced endocytosis. Although HIP1r and HIP1 display only a partially overlapping pattern of protein interactions, these data suggest that both proteins share a functional homology by binding 3-phosphorylated inositol lipids and stabilizing receptor tyrosine kinases in a fashion that may contribute to their ability to alter cell growth and survival.

A comparison of LIDT behavior of metal-dielectric mirrors in ns and ps pulse regime at 1030 nm with regard to the coating technology

NASA Astrophysics Data System (ADS)

Škoda, Václav; Vanda, Jan; Uxa, Štěpán

2017-11-01

Several sets of mirror samples with multilayer system Ta2O5/SiO2 on silver metal layer were manufactured using either PVD or IAD coating technology. Both BK7 and fused silica substrates were used for preparation of samples. Laserinduced- damage-threshold (LIDT) of metal-dielectric mirrors was tested using a laser apparatus working at 1030 nm wavelength, in ns and ps pulse length domains in S-on-1 test mode. The measured damage threshold values at 45 deg angle of incidence and P-polarization were compared for different pulse length, substrate materials and coating technology.

Super-Hydrophobic Surface Prepared by Lanthanide Oxide Ceramic Deposition Through PS-PVD Process

NASA Astrophysics Data System (ADS)

Li, Jie; Li, Cheng-Xin; Chen, Qing-Yu; Gao, Jiu-Tao; Wang, Jun; Yang, Guan-Jun; Li, Chang-Jiu

2017-02-01

Super-hydrophobic surface has received widespread attention in recent years. Both the surface morphology and chemical composition have significant impact on hydrophobic performance. A novel super-hydrophobic surface based on plasma spray-vapor deposition was introduced in the present paper. Samaria-doped ceria, which has been proved as an intrinsic hydrophobic material, was used as feedstock material. Additionally, in order to investigate the influence of surface free energy on the hydrophobicity, chemical modification by low surface free energy materials including stearic acid and 1,1,2,2-tetrahydroperfluorodecyltrimethoxysilane (FAS) was used on coating surface. Scanning electron microscopy and Fourier transform infrared spectroscopy were employed to characterize the coating surface. The results show that the obtained surface has a hierarchical structure composed by island-like structures agglomerated with angular-like sub-micrometer-sized particles. Moreover, with the surface free energy decreases, the hydrophobic property of the surface improves gradually. The water contact angle of the as-sprayed coating surface increases from 110° to 148° after modification by stearic acid and up to 154° by FAS. Furthermore, the resultant surface with super-hydrophobicity exhibits an excellent stability.

Defect analysis in low temperature atomic layer deposited Al{sub 2}O{sub 3} and physical vapor deposited SiO barrier films and combination of both to achieve high quality moisture barriers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maindron, Tony, E-mail: tony.maindron@cea.fr; Jullien, Tony; André, Agathe

2016-05-15

Al{sub 2}O{sub 3} [20 nm, atomic layer deposition (ALD)] and SiO films' [25 nm, physical vacuum deposition (PVD)] single barriers as well as hybrid barriers of the Al{sub 2}O{sub 3}/SiO or SiO/Al{sub 2}O{sub 3} have been deposited onto single 100 nm thick tris-(8-hydroxyquinoline) aluminum (AlQ{sub 3}) organic films made onto silicon wafers. The defects in the different barrier layers could be easily observed as nonfluorescent AlQ{sub 3} black spots, under ultraviolet light on the different systems stored into accelerated aging conditions (85 °C/85% RH, ∼2000 h). It has been observed that all devices containing an Al{sub 2}O{sub 3} layer present a lag time τ frommore » which defect densities of the different systems start to increase significantly. This is coherent with the supposed pinhole-free nature of fresh, ALD-deposited, Al{sub 2}O{sub 3} films. For t > τ, the number of defect grows linearly with storage time. For devices with the single Al{sub 2}O{sub 3} barrier layer, τ has been estimated to be 64 h. For t > τ, the defect occurrence rate has been calculated to be 0.268/cm{sup 2}/h. Then, a total failure of fluorescence of the AlQ{sub 3} film appears between 520 and 670 h, indicating that the Al{sub 2}O{sub 3} barrier has been totally degraded by the hot moisture. Interestingly, the device with the hybrid barrier SiO/Al{sub 2}O{sub 3} shows the same characteristics as the device with the single Al{sub 2}O{sub 3} barrier (τ = 59 h; 0.246/cm{sup 2}/h for t > τ), indicating that Al{sub 2}O{sub 3} ALD is the factor that limits the performance of the barrier system when it is directly exposed to moisture condensation. At the end of the storage period (1410 h), the defect density for the system with the hybrid SiO/Al{sub 2}O{sub 3} barrier is 120/cm{sup 2}. The best sequence has been obtained when Al{sub 2}O{sub 3} is passivated by the SiO layer (Al{sub 2}O{sub 3}/SiO). In that case, a large lag time of 795 h and a

Stability and Unimolecular Reactivity of Palladate(II) Complexes [Ln PdR3 ]- (L=Phosphine, R=Organyl, n=0 and 1).

PubMed

Kolter, Marlene; Koszinowski, Konrad

2016-10-24

The reduction of Pd II precatalysts to catalytically active Pd 0 species is a key step in many palladium-mediated cross-coupling reactions. Besides phosphines, the stoichiometrically used organometallic reagents can afford this reduction, but do so in a poorly understood way. To elucidate the mechanism of this reaction, we have treated solutions of Pd(OAc) 2 and a phosphine ligand L in tetrahydrofuran with RMgCl (R=Ph, Bn, Bu) as well as other organometallic reagents. Analysis of these model systems by electrospray- ionization mass spectrometry found palladate(II) complexes [L n PdR 3 ] - (n=0 and 1), thus pointing to the occurrence of transmetallation reactions. Upon gas-phase fragmentation, the [L n PdR 3 ] - anions preferentially underwent a reductive elimination to yield Pd 0 species. The sequence of the transmetallation and reductive elimination, thus, constitutes a feasible mechanism for the reduction of the Pd(OAc) 2 precatalyst. Other species of interest observed include the Pd IV complex [PdBn 5 ] - , which did not fragment via a reductive elimination but lost BnH instead. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Strong metal support interaction of Pt on TiO2 grown by atomic layer deposition and physical vapor deposition for fuel cell applications

NASA Astrophysics Data System (ADS)

Hansen, Robin Paul

Several roadblocks prevent the large-scale commercialization of hydrogen fuel cells, including the stability of the Pt catalysts and their substrates, as well as the high cost of Pt. This is particularly true for the cathode, which requires a higher Pt loading because of the slow kinetics of the oxygen reduction reaction (ORR). The problem with the stability of the substrate can be solved by replacing the traditional carbon support with a conductive metal oxide such as reduced TiO2, which will not easily corrode and should result in longer lasting fuel cells. In this study, Pt was deposited either by atomic layer deposition (ALD) or physical vapor deposition (PVD). The typical size of the Pt islands that were grown using these deposition techniques was 3-8 nm. One factor that can inhibit the catalytic activity of a metal catalyst on a metal oxide is the strong metal support interaction (SMSI). This is where a metal on a reducible metal oxide can be encapsulated by a layer of the metal oxide support material at elevated temperatures. The processing of materials through atomic layer deposition can exceed this temperature. The TiO2 substrates used in this study were either grown by ALD, which results in a polycrystalline anatase film, or were single-crystal rutile TiO2(110) samples prepared in ultra-high vacuum (UHV). The Pt/TiO2 samples were tested electrochemically using cyclic voltammetry (CV) to determine the level of catalytic activity. To determine the effect of the SMSI interaction on the catalytic activity of the PVD grown samples, CV was performed on samples that were annealed in high vacuum after Pt deposition. Additional characterization was performed with scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), Rutherford backscattering spectrometry (RBS), and four point probe analysis. Platinum that was deposited by PVD was used as a standard since it is not affected by the SMSI at the low temperature of the substrate during deposition

Examination of Hybrid Metal Coatings for Mitigation of Fission Product Release and Corrosion Protection of LWR SiC/SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ang, Caen K.; Burns, Joseph R.; Terrani, Kurt A.

2016-09-01

There is a need to increase the safety margins of current and future light water reactors (LWRs) due to the unfortunate events at Fukushima Daiichi Nuclear Plant. Safety is crucial to restore public confidence in nuclear energy, acknowledged as an economical, high-­density energy solution to climate change. The development of accident-­tolerant fuel (ATF) concepts is crucial to this endeavor. The objective of ATF is to delay the consequences of accident progression, being inset in high temperature steam and maintaining high thermomechanical strength for radionuclide retention. The use of advanced SiCf-­SiC composite as a substitute for zircaloy-­based cladding is being considered.more » However, at normal operations, SiC is vulnerable to the reactor coolant and may corrode at an unacceptable rate. As a ceramic-­matrix composite material, it is likely to undergo microcracking operation, which may compromise the ability to contain gaseous fission products. A proposed solution to both issues is the application of mitigation coatings for use in normal operations. At Oak Ridge National Laboratory (ORNL), three coating technologies have been investigated with industry collaborators and vendors. These are electrochemical deposition, cathodic arc physical vapor deposition (PVD hereafter) and vacuum plasma spray (VPS). The objective of this document is to summarize these processing technologies, the resultant as-­processed microstructures and properties of the coatings. In all processes, substrate constraint resulted in substantial tensile stresses within the coating layer. Each technology must mitigate this tensile stress. Electrochemical coatings use chromium as the coolant facing material, and are deposited on a nickel or carbon “bond coat”. This is economical but suffers microcracking in the chromium layer. PVD-­based coatings use chromium and titanium in both metallic form and nitrides, and can be deposited defense-­in-­depth as multilayers. This vapor

Populating dark matter haloes with galaxies: comparing the 2dFGRS with mock galaxy redshift surveys

NASA Astrophysics Data System (ADS)

Yang, Xiaohu; Mo, H. J.; Jing, Y. P.; van den Bosch, Frank C.; Chu, YaoQuan

2004-06-01

In two recent papers, we developed a powerful technique to link the distribution of galaxies to that of dark matter haloes by considering halo occupation numbers as a function of galaxy luminosity and type. In this paper we use these distribution functions to populate dark matter haloes in high-resolution N-body simulations of the standard ΛCDM cosmology with Ωm= 0.3, ΩΛ= 0.7 and σ8= 0.9. Stacking simulation boxes of 100 h-1 Mpc and 300 h-1 Mpc with 5123 particles each we construct mock galaxy redshift surveys out to a redshift of z= 0.2 with a numerical resolution that guarantees completeness down to 0.01L*. We use these mock surveys to investigate various clustering statistics. The predicted two-dimensional correlation function ξ(rp, π) reveals clear signatures of redshift space distortions. The projected correlation functions for galaxies with different luminosities and types, derived from ξ(rp, π), match the observations well on scales larger than ~3 h-1 Mpc. On smaller scales, however, the model overpredicts the clustering power by about a factor two. Modelling the `finger-of-God' effect on small scales reveals that the standard ΛCDM model predicts pairwise velocity dispersions (PVD) that are ~400 km s-1 too high at projected pair separations of ~1 h-1 Mpc. A strong velocity bias in massive haloes, with bvel≡σgal/σdm~ 0.6 (where σgal and σdm are the velocity dispersions of galaxies and dark matter particles, respectively) can reduce the predicted PVD to the observed level, but does not help to resolve the overprediction of clustering power on small scales. Consistent results can be obtained within the standard ΛCDM model only when the average mass-to-light ratio of clusters is of the order of 1000 (M/L)solar in the B-band. Alternatively, as we show by a simple approximation, a ΛCDM model with σ8~= 0.75 may also reproduce the observational results. We discuss our results in light of the recent WMAP results and the constraints on σ8 obtained

Study of Polymer Crystallization by Physical Vapor Deposition

NASA Astrophysics Data System (ADS)

Jeong, Hyuncheol

When a polymer is confined under the submicron length scale, confinement size and interfaces can significantly impact the crystallization kinetics and resulting morphology. The ability to tune the morphology of confined polymer systems is of critical importance for the development of high-performance polymer microelectronics. The wisdom from the research on confined crystallization suggests that it would be beneficial to have a processing route in which the crystallization of polymers is driven by interface and temperature effects at a nanometer-scale confinement. In practice, for atomic and small-molecular systems, physical vapor deposition (PVD) has been recognized as the most successful processing route for the precise control of the film structure at surface utilizing confinement effects. While standard PVD technologies are not generally applicable to the deposition of the chemically fragile macromolecules, the development of matrix-assisted pulsed laser evaporation (MAPLE) now enables the non-destructive PVD of high-molecular weight polymers. In this thesis work, we investigated the use of MAPLE for the precise control of the crystallization of polymer films at a molecular level. We also sought to decipher the rules governing the crystallization of confined polymers, by using MAPLE as a tool to form confined polymer systems onto substrates with a controlled temperature. We first explored the early stages of film growth and crystallization of poly(ethylene oxide) (PEO) at the substrate surface formed by MAPLE. The unique mechanism of film formation in MAPLE, the deposition of submicron-sized polymer droplets, allowed for the manifestation of confinement and substrate effects in the crystallization of MAPLE-deposited PEO. Furthermore, we also focused on the property of the amorphous PEO film formed by MAPLE, showing the dependence of polymer crystallization kinetics on the thermal history of the amorphous phase. Lastly, we probed how MAPLE processing affected

A 1H-n.m.r. study of casein micelles.

PubMed Central

Griffin, M C; Roberts, G C

1985-01-01

The 1H-n.m.r. spectrum of casein micelles consists of a small number of moderately sharp (linewidth approx. 60 Hz) resonances superimposed on the envelope of very broad lines expected for particles of this size. These sharp lines resemble, in chemical shift and relative intensity, the spectrum of the isolated 'macropeptide' released from the micelles by treatment with chymosin. The sharp lines in the casein micelle spectrum are further sharpened by addition of chymosin and broadened markedly by addition of ethanol. These observations are consistent with the proposal that the 'macropeptide' (the C-terminal 64 residues of K-casein) forms flexible 'hairs' on the surface of the micelles. PMID:3924034

Ultra-Smooth As-Deposited Optical Films

DTIC Science & Technology

2004-03-31

reduction. • Conformal Coatings . Unlike other PVD processes which are strictly line-of- sight, PLASMION’s NMIBD has demonstrated the ability to create...a few days (for in-line coating machine, or roll-to-roll machine). In our project we use the box chamber and deposition materials: SiO2 and Ta2O5 ...are widely used for optical applications; these may be roughly divided into low and high technology categories. Low technology coatings (a relative

Numerical investigations of failure in EB-PVD thermal barrier coating systems

NASA Astrophysics Data System (ADS)

Glynn, Michael L.

Thermal barrier coating (TBC) systems are used in high temperature applications in turbine engines. TBCs are applied on superalloy substrates and are multilayered coatings comprised of a metallic bond coat, a thermally grown oxide (TGO) and a ceramic top coat. They provide thermal protection for the superalloy substrate and are considered to hold the greatest potential for increased operating temperatures. Failure of the TBC system most commonly occurs as a result of large scale buckling and spallation. The buckling is a consequence of many small-scale delaminations that arise in the top coat above local imperfections in the TGO, and durability of the TBC system is governed by a sequence of crack nucleation, propagation and coalescence. The numerical investigations that are employed in this dissertation are used to determine the stress development near the imperfections and are based on microstructural observations and measured material properties of TBC test buttons supplied by GE Aircraft Engines. The test buttons were subject to thermal cycling at GE and cycled to different percentages of TBC life. Numerical simulations of two different types of TBC tests are used to show that the top coat out-of-plane stress increases with a decrease of the substrate radius of curvature and a decrease in the heating rate. An inherent scaling parameter in the TBC system is identified and used to demonstrate that the stress developed in the top coat is governed by the evolution of an imperfection in the TGO. The effect of a martensitic phase transformation in the bond coat, related to a change in bond coat chemistry, is shown to significantly increase the top coat out-of-plane tensile stress. Finally, a subsurface crack is simulated in the top coat and used to determine the influence of the bond coat on failure of the TBC system. While the bond coat inelastic properties are the most important factors in determining the extent of the crack opening displacement, the bond coat martensitic phase transformation governs when the crack propagates. The crack propagates during heat-up when the martensitic phase transformation is included, and it propagates during cool-down when the transformation is not included.

Transfusion burden in non-dialysis chronic kidney disease patients with persistent anemia treated in routine clinical practice: a retrospective observational study.

PubMed

Fox, Kathleen M; Yee, Jerry; Cong, Ze; Brooks, John M; Petersen, Jeffrey; Lamerato, Lois; Gandra, Shravanthi R

2012-01-24

Transfusion patterns are not well characterized in non-dialysis (ND) chronic kidney disease (CKD) patients. This study describes the proportion of patients transfused, units of blood transfused and trigger-hemoglobin (Hb) levels for transfusions in severe anemic, ND-CKD patients in routine practice. A retrospective cohort study of electronic medical record data from the Henry Ford Health System identified 374 adult, ND-CKD patients with severe anemia (Hb < 10 g/dL and subsequent use of erythropoiesis-stimulating agents [ESA] therapy, blood transfusions, or a second Hb < 10 g/dL) between January 2004 and June 2008. Exclusions included those with prior diagnoses of cancer, renal or liver transplant, end-stage renal disease, acute bleeding, trauma, sickle cell disease, or aplastic anemia. A gap of ≥ 1 days between units of blood transfused was counted as a separate transfusion. At least 1 transfusion (mean of 2 units; range, 1-4) was administered to 20% (75/374) of ND-CKD patients with mean (± SD) follow-up of 459 (± 427) days. The mean (± SD) Hb level closest and prior to a transfusion was 8.8 (± 1.5) g/dL. Patients who were hospitalized in the 6 months prior to their first anemia diagnosis were 6.3 times more likely to receive a blood transfusion than patients who were not hospitalized (p < 0.0001). Patients with peripheral vascular disease (PVD) were twice as likely to have a transfusion as patients without PVD (p = 0.04). Transfusions were prevalent and the trigger hemoglobin concentration was approximately 9 g/dL among ND-CKD patients with anemia. To reduce the transfusion burden, clinicians should consider other anemia treatments including ESA therapy.

Adhesive and tribocorrosive behavior of TiAlPtN/TiAlN/TiAl multilayers sputtered coatings over CoCrMo

NASA Astrophysics Data System (ADS)

Canto, C. E.; Andrade, E.; Rocha, M. F.; Alemón, B.; Flores, M.

2017-09-01

The tribocorrosion resistance and adherence of multilayer coatings of TiAlPtN/TiAlN/TiAl synthesized by PVD reactive magnetron sputtering over a CoCrMo alloy substrate in 10 periods of 30 min each were analyzed and compared to those of the substrate alone and to that of a TiAlPtN single layer coating of the same thickness. The objective of the present work was to create multilayers with different amounts of Pt in order to enhance the tribocorrosion resistance of a biomedical alloy of CoCrMo. Tribocorrosion tests were performed using Simulated Body Fluid (SBF) at typical body temperature with a tribometer in a pin on disk test. The elemental composition and thickness of the coating which behave better at the tribocorrosion tests were evaluated by means of RBS (Rutherford Backscattering Spectroscopy) IBA (Ion Beam Analysis) technique, using an alpha particles beam of 1.8 MeV, before and after the reciprocating motion in the tribocorrosion test. In order to simulate the elemental profile of the samples, the SIMNRA simulation computer code was used. Measurements of the adhesion of the coatings to the substrate were carried on by means of a scratch test using a tribometer. By taking micrographs of the produced tracks, the critical loads at which the coatings are fully separated from the substrate were determined. From these tests it was observed that a coating with 10 min of TiAlPtN in a TiAlPtN/TiAl period of 30 min in multilayers of 10 periods and with an average thickness of 145 nm for the TiAlPtN nanolayers had the best tribocorrosion resistance behavior, compared to that of the CoCrMo alloy. The RBS experiments showed a reduction of the thickness of the films along with some loss of the multilayer structure after the reciprocating motion. The adhesion tests indicated that the multilayer with the average TiAlPtN thickness of 145 nm displayed the highest critical load. These results indicate a high correlation between the adherence and the tribocorrosion behavior.

N-acetylcysteine Ameliorates Prostatitis via miR-141 Regulating Keap1/Nrf2 Signaling.

PubMed

Wang, Liang-Liang; Huang, Yu-Hua; Yan, Chun-Yin; Wei, Xue-Dong; Hou, Jian-Quan; Pu, Jin-Xian; Lv, Jin-Xing

2016-04-01

Chronic prostatitis was the most common type of prostatitis and oxidative stress was reported to be highly elevated in prostatitis patients. In this study, we determined the effect of N-acetylcysteine (NAC) on prostatitis and the molecular mechanism involved in it. Male Sprague-Dawley rats were divided into three groups: control group (group A, n = 20), carrageenan-induced chronic nonbacterial prostatitis (CNP) model group (group B, n = 20), and carrageenan-induced CNP model group with NAC injection (group C, n = 20). Eye score, locomotion score, inflammatory cell count, cyclooxygenase 2 (COX2) expression, and Evans blue were compared in these three groups. The expression of miR-141 was determined by quantitative real-time PCR (qRT-PCR). Moreover, protein expressions of Kelch-like ECH-associated protein-1 (Keap1) and nuclear factor erythroid-2 related factor 2 (Nrf2) and its target genes were examined by Western blot. Luciferase reporter assay was performed in RWPE-1 cells transfected miR-141 mimic or inhibitor and the plasmid carrying 3'-UTR of Keap1. The value of eye score, locomotion score, inflammatory cell count, and Evans blue were significantly decreased in group C, as well as the expression of COX2, when comparing to that of group B. These results indicated that NAC relieved the carrageenan-induced CNP. Further, we found that NAC increased the expression of miR-141 and activated the Keap1/Nrf2 signaling. Luciferase reporter assay revealed that miR-141 mimic could suppress the activity of Keap1 and stimulate the downstream target genes of Nrf2. In addition, miR-141 inhibitor could reduce the effect of NAC on prostatitis. NAC ameliorates the carrageenan-induced prostatitis and prostate inflammation pain through miR-141 regulating Keap1/Nrf2 signaling.

Hemodynamic Assessment of Compliance of Pre-Stressed Pulmonary Valve-Vasculature in Patient Specific Geometry Using an Inverse Algorithm

NASA Astrophysics Data System (ADS)

Hebbar, Ullhas; Paul, Anup; Banerjee, Rupak

2016-11-01

Image based modeling is finding increasing relevance in assisting diagnosis of Pulmonary Valve-Vasculature Dysfunction (PVD) in congenital heart disease patients. This research presents compliant artery - blood interaction in a patient specific Pulmonary Artery (PA) model. This is an improvement over our previous numerical studies which assumed rigid walled arteries. The impedance of the arteries and the energy transfer from the Right Ventricle (RV) to PA is governed by compliance, which in turn is influenced by the level of pre-stress in the arteries. In order to evaluate the pre-stress, an inverse algorithm was developed using an in-house script written in MATLAB and Python, and implemented using the Finite Element Method (FEM). This analysis used a patient specific material model developed by our group, in conjunction with measured pressure (invasive) and velocity (non-invasive) values. The analysis was performed on an FEM solver, and preliminary results indicated that the Main PA (MPA) exhibited higher compliance as well as increased hysteresis over the cardiac cycle when compared with the Left PA (LPA). The computed compliance values for the MPA and LPA were 14% and 34% lesser than the corresponding measured values. Further, the computed pressure drop and flow waveforms were in close agreement with the measured values. In conclusion, compliant artery - blood interaction models of patient specific geometries can play an important role in hemodynamics based diagnosis of PVD.

A study on assimilating potential vorticity data

NASA Astrophysics Data System (ADS)

Li, Yong; Ménard, Richard; Riishøjgaard, Lars Peter; Cohn, Stephen E.; Rood, Richard B.

1998-08-01

The correlation that exists between the potential vorticity (PV) field and the distribution of chemical tracers such as ozone suggests the possibility of using tracer observations as proxy PV data in atmospheric data assimilation systems. Especially in the stratosphere, there are plentiful tracer observations but a general lack of reliable wind observations, and the correlation is most pronounced. The issue investigated in this study is how model dynamics would respond to the assimilation of PV data. First, numerical experiments of identical-twin type were conducted with a simple univariate nuding algorithm and a global shallow water model based on PV and divergence (PV-D model). All model fields are successfully reconstructed through the insertion of complete PV data alone if an appropriate value for the nudging coefficient is used. A simple linear analysis suggests that slow modes are recovered rapidly, at a rate nearly independent of spatial scale. In a more realistic experiment, appropriately scaled total ozone data from the NIMBUS-7 TOMS instrument were assimilated as proxy PV data into the PV-D model over a 10-day period. The resulting model PV field matches the observed total ozone field relatively well on large spatial scales, and the PV, geopotential and divergence fields are dynamically consistent. These results indicate the potential usefulness that tracer observations, as proxy PV data, may offer in a data assimilation system.

Provoked vestibulodynia-women's experience of participating in a multidisciplinary vulvodynia program.

PubMed

Sadownik, Leslie A; Seal, Brooke N; Brotto, Lori A

2012-04-01

Provoked Vestibulodynia (PVD) is the most common cause of pain with intercourse that affects reproductively aged women. The treatment outcome literature suggests that existing treatments, when administered individually, may have only limited benefits for improving pain, and that multidisciplinary approaches may be more effective for reducing pain and pain-associated distress. A program that offers education, group cognitive behavioral therapy, pelvic floor physiotherapy, and medical appointments was developed and implemented at our hospital site. To explore the experiences of women who participated in the Multidisciplinary Vulvodynia Program (MVP) in order to identify the perceived benefits of this program. Qualitative retrospective study. A semi-structured interview format was used to interview graduates of the MVP. Nineteen women, mean age 30.8 (20-54 years), participated in a one-on-one in-depth interview with a trained interviewer. The key question asked was "What has been the impact of the mvp on your life?" interviews were audio-recorded, transcribed, and qualitatively analyzed for major themes. Content analysis of interview transcripts. Five main themes emerged and included: increased knowledge, gained tools/skills, perceived improved mood/psychological well-being, a sense of validation and support, and an enhanced sense of empowerment. Overall, a multidisciplinary vulvodynia program was perceived as being beneficial for women with PVD. © 2012 International Society for Sexual Medicine.

Monitoring Delamination of Thermal Barrier Coatings by Near-Infrared and Upconversion Luminescence Imaging

NASA Technical Reports Server (NTRS)

Eldridge, J. I.; Martin, R. E.; Singh, Jogender; Wolfe, Doug E.

2008-01-01

Previous work has demonstrated that TBC delamination can be monitored by incorporating a thin luminescent sublayer that produces greatly increased luminescence intensity from delaminated regions of the TBC. Initial efforts utilized visible-wavelength luminescence from either europium or erbium doped sublayers. This approach exhibited good sensitivity to delamination of electron-beam physical-vapor-deposited (EB-PVD) TBCs, but limited sensitivity to delamination of the more highly scattering plasma-sprayed TBCs due to stronger optical scattering and to interference by luminescence from rare-earth impurities. These difficulties have now been overcome by new strategies employing near-infrared (NIR) and upconversion luminescence imaging. NIR luminescence at 1550 nm was produced in an erbium plus ytterbium co-doped yttria-stabilized zirconia (YSZ) luminescent sublayer using 980-nm excitation. Compared to visible-wavelength luminescence, these NIR emission and excitation wavelengths are much more weakly scattered by the TBC and therefore show much improved depth-probing capabilities. In addition, two-photon upconversion luminescence excitation at 980 nm wavelength produces luminescence emission at 562 nm with near-zero fluorescence background and exceptional contrast for delamination indication. The ability to detect TBC delamination produced by Rockwell indentation and by furnace cycling is demonstrated for both EB-PVD and plasma-sprayed TBCs. The relative strengths of the NIR and upconversion luminescence methods for monitoring TBC delamination are discussed.

Preliminary clinical evaluation of automated analysis of the sublingual microcirculation in the assessment of patients with septic shock: Comparison of automated versus semi-automated software.

PubMed

Sharawy, Nivin; Mukhtar, Ahmed; Islam, Sufia; Mahrous, Reham; Mohamed, Hassan; Ali, Mohamed; Hakeem, Amr A; Hossny, Osama; Refaa, Amera; Saka, Ahmed; Cerny, Vladimir; Whynot, Sara; George, Ronald B; Lehmann, Christian

2017-01-01

The outcome of patients in septic shock has been shown to be related to changes within the microcirculation. Modern imaging technologies are available to generate high resolution video recordings of the microcirculation in humans. However, evaluation of the microcirculation is not yet implemented in the routine clinical monitoring of critically ill patients. This is mainly due to large amount of time and user interaction required by the current video analysis software. The aim of this study was to validate a newly developed automated method (CCTools®) for microcirculatory analysis of sublingual capillary perfusion in septic patients in comparison to standard semi-automated software (AVA3®). 204 videos from 47 patients were recorded using incident dark field (IDF) imaging. Total vessel density (TVD), proportion of perfused vessels (PPV), perfused vessel density (PVD), microvascular flow index (MFI) and heterogeneity index (HI) were measured using AVA3® and CCTools®. Significant differences between the numeric results obtained by the two different software packages were observed. The values for TVD, PVD and MFI were statistically related though. The automated software technique successes to show septic shock induced microcirculation alterations in near real time. However, we found wide degrees of agreement between AVA3® and CCTools® values due to several technical factors that should be considered in the future studies.

Endophytic colonization and biocontrol performance of Pseudomonas fluorescens PICF7 in olive (Olea europaea L.) are determined neither by pyoverdine production nor swimming motility.

PubMed

Maldonado-González, M Mercedes; Schilirò, Elisabetta; Prieto, Pilar; Mercado-Blanco, Jesús

2015-09-01

Pseudomonas fluorescens PICF7 is an indigenous inhabitant of olive (Olea europaea L.) rhizosphere, able to display endophytic lifestyle in roots, to induce a wide range of defence responses upon colonization of this organ and to exert effective biological control against Verticillium wilt of olive (VWO) (Verticillium dahliae). We aimed to evaluate the involvement of specific PICF7 phenotypes in olive root colonization and VWO biocontrol effectiveness by generating mutants impaired in swimming motility (fliI) or siderophore pyoverdine production (pvdI). Besides, the performance of mutants with diminished in vitro growth in potato dextrose agar medium (gltA) and cysteine (Cys) auxotrophy was also assessed. Results showed that olive root colonization and VWO biocontrol ability of the fliI, pvdI and gltA mutants did not significantly differ from that displayed by the parental strain PICF7. Consequently, altered in vitro growth, swimming motility and pyoverdine production contribute neither to PICF7 VWO suppressive effect nor to its colonization ability. In contrast, the Cys auxotroph mutant showed reduced olive root colonization capacity and lost full biocontrol efficacy. Moreover, confocal laser scanning microscopy revealed that all mutants tested were able to endophytically colonize root tissue to the same extent as wild-type PICF7, discarding these traits as relevant for its endophytic lifestyle. © 2014 Society for Applied Microbiology and John Wiley & Sons Ltd.

Nanostructured MgTiO3 thick films obtained by electrophoretic deposition from nanopowders prepared by solar PVD

NASA Astrophysics Data System (ADS)

Apostol, Irina; Mahajan, Amit; Monty, Claude J. A.; Venkata Saravanan, K.

2015-12-01

A novel combination of solar physical vapor deposition (SPVD) and electrophoretic deposition (EPD) that was developed to grow MgTiO3 nanostructured thick films is presented. Obtaining nanostructured MgTiO3 thick films, which can replace bulk ceramic components, a major trend in electronic industry, is the main objective of this work. The advantage of SPVD is direct synthesis of nanopowders, while EPD is simple, fast and inexpensive technique for preparing thick films. SPVD technique was developed at CNRS-PROMES Laboratory, Odeillo-Font Romeu, France, while the EPD was performed at University of Aveiro - DeMAC/CICECO, Portugal. The nanopowders with an average crystallite size of about 30 nm prepared by SPVD were dispersed in 50 ml of acetone in basic media with addition of triethanolamine. The obtained well-dispersed and stable suspensions were used for carrying out EPD on 25 μm thick platinum foils. After deposition, films with thickness of about 22-25 μm were sintered in air for 15 min at 800, 900 and 1000 °C. The structural and microstructural characterization of the sintered thick films was carried out using XRD and SEM, respectively. The thickness of the sintered samples were about 18-20 μm, which was determined by cross-sectional SEM. Films sintered at 900 °C exhibit a dielectric constant, ɛr ∼18.3 and dielectric loss, tan δ ∼0.0012 at 1 MHz. The effects of processing techniques (SPVD and EPD) on the structure, microstructure and dielectric properties are reported in detail. The obtained results indicate that the thick films obtained in the present study can be promising for low loss materials for microwave and millimeter wave applications.

Differential Sputtering Behavior of Pyrolytic Graphite and Carbon-Carbon Composite Under Xenon Bombardment

NASA Technical Reports Server (NTRS)

Williams, John D.; Johnson, Mark L.; Williams, Desiree D.

2003-01-01

A differential sputter yield measurement technique is described, which consists of a quartz crystal monitor that is swept at constant radial distance from a small target region where a high current density xenon ion beam is aimed. This apparatus has been used to characterize the sputtering behavior of various forms of carbon including polycrystalline graphite, pyrolytic graphite, and PVD-infiltrated and pyrolized carbon-carbon composites. Sputter yield data are presented for pyrolytic graphite and carbon-carbon composite over a range of xenon ion energies from 200 eV to 1 keV and angles of incidence from 0 deg (normal incidence) to 60 deg .

Micro- and Nano-Scale Fabrication of Fluorinated Polymers by Direct Etching Using Focused Ion Beam

NASA Astrophysics Data System (ADS)

Fukutake, Naoyuki; Miyoshi, Nozomi; Takasawa, Yuya; Urakawa, Tatsuya; Gowa, Tomoko; Okamoto, Kazumasa; Oshima, Akihiro; Tagawa, Seiichi; Washio, Masakazu

2010-06-01

Micro- and nano-scale fabrications of various fluorinated polymers were demonstrated by direct maskless etching using a focused ion beam (FIB). The etching rates of perfluorinated polymers, such as poly(tetrafluoroethylene) (PTFE), poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP), poly(tetrafluoroethylene-co-perfluoroalkoxyvinylether) (PFA), were about 500-1000 times higher than those of partially fluorinated polymers, such as poly(tetrafluoroethylene-co-ethylene) (ETFE) and poly(vinilydene-fluoride) (PVdF). Controlled high quality and high aspect-ratio nanostructures of spin-coated cross-linked PTFE were obtained without solid debris. The height and diameter of the fibers were about 1.5 µm and 90 nm, respectively. Their aspect ratio was about 17.

Micro- and Nano-Scale Fabrication of Fluorinated Polymers by Direct Etching Using Focused Ion Beam

NASA Astrophysics Data System (ADS)

Naoyuki Fukutake,; Nozomi Miyoshi,; Yuya Takasawa,; Tatsuya Urakawa,; Tomoko Gowa,; Kazumasa Okamoto,; Akihiro Oshima,; Seiichi Tagawa,; Masakazu Washio,

2010-06-01

Micro- and nano-scale fabrications of various fluorinated polymers were demonstrated by direct maskless etching using a focused ion beam (FIB). The etching rates of perfluorinated polymers, such as poly(tetrafluoroethylene) (PTFE), poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP), poly(tetrafluoroethylene-co-perfluoroalkoxyvinylether) (PFA), were about 500-1000 times higher than those of partially fluorinated polymers, such as poly(tetrafluoroethylene-co-ethylene) (ETFE) and poly(vinilydene-fluoride) (PVdF). Controlled high quality and high aspect-ratio nanostructures of spin-coated cross-linked PTFE were obtained without solid debris. The height and diameter of the fibers were about 1.5 μm and 90 nm, respectively. Their aspect ratio was about 17.

Protective Efficacy of Recombinant Turkey Herpes Virus (rHVT-H5) and Inactivated H5N1 Vaccines in Commercial Mulard Ducks against the Highly Pathogenic Avian Influenza (HPAI) H5N1 Clade 2.2.1 Virus

PubMed Central

Kilany, Walid H.; Safwat, Marwa; Mohammed, Samy M.; Salim, Abdullah; Fasina, Folorunso Oludayo; Fasanmi, Olubunmi G.; Shalaby, Azhar G.; Dauphin, Gwenaelle; Hassan, Mohammed K.; Lubroth, Juan; Jobre, Yilma M.

2016-01-01

In Egypt, ducks kept for commercial purposes constitute the second highest poultry population, at 150 million ducks/year. Hence, ducks play an important role in the introduction and transmission of avian influenza (AI) in the Egyptian poultry population. Attempts to control outbreaks include the use of vaccines, which have varying levels of efficacy and failure. To date, the effects of vaccine efficacy has rarely been determined in ducks. In this study, we evaluated the protective efficacy of a live recombinant vector vaccine based on a turkey Herpes Virus (HVT) expressing the H5 gene from a clade 2.2 H5N1 HPAIV strain (A/Swan/Hungary/499/2006) (rHVT-H5) and a bivalent inactivated H5N1 vaccine prepared from clade 2.2.1 and 2.2.1.1 H5N1 seeds in Mulard ducks. A 0.3ml/dose subcutaneous injection of rHVT-H5 vaccine was administered to one-day-old ducklings (D1) and another 0.5ml/dose subcutaneous injection of the inactivated MEFLUVAC was administered at 7 days (D7). Four separate challenge experiments were conducted at Days 21, 28, 35 and 42, in which all the vaccinated ducks were challenged with 106EID50/duck of H5N1 HPAI virus (A/chicken/Egypt/128s/2012(H5N1) (clade 2.2.1) via intranasal inoculation. Maternal-derived antibody regression and post-vaccination antibody immune responses were monitored weekly. Ducks vaccinated at 21, 28, 35 and 42 days with the rHVT-H5 and MEFLUVAC vaccines were protected against mortality (80%, 80%, 90% and 90%) and (50%, 70%, 80% and 90%) respectively, against challenges with the H5N1 HPAI virus. The amount of viral shedding and shedding rates were lower in the rHVT-H5 vaccine groups than in the MEFLUVAC groups only in the first two challenge experiments. However, the non-vaccinated groups shed significantly more of the virus than the vaccinated groups. Both rHVT-H5 and MEFLUVAC provide early protection, and rHVT-H5 vaccine in particular provides protection against HPAI challenge. PMID:27304069

Protective Efficacy of Recombinant Turkey Herpes Virus (rHVT-H5) and Inactivated H5N1 Vaccines in Commercial Mulard Ducks against the Highly Pathogenic Avian Influenza (HPAI) H5N1 Clade 2.2.1 Virus.

PubMed

Kilany, Walid H; Safwat, Marwa; Mohammed, Samy M; Salim, Abdullah; Fasina, Folorunso Oludayo; Fasanmi, Olubunmi G; Shalaby, Azhar G; Dauphin, Gwenaelle; Hassan, Mohammed K; Lubroth, Juan; Jobre, Yilma M

2016-01-01

In Egypt, ducks kept for commercial purposes constitute the second highest poultry population, at 150 million ducks/year. Hence, ducks play an important role in the introduction and transmission of avian influenza (AI) in the Egyptian poultry population. Attempts to control outbreaks include the use of vaccines, which have varying levels of efficacy and failure. To date, the effects of vaccine efficacy has rarely been determined in ducks. In this study, we evaluated the protective efficacy of a live recombinant vector vaccine based on a turkey Herpes Virus (HVT) expressing the H5 gene from a clade 2.2 H5N1 HPAIV strain (A/Swan/Hungary/499/2006) (rHVT-H5) and a bivalent inactivated H5N1 vaccine prepared from clade 2.2.1 and 2.2.1.1 H5N1 seeds in Mulard ducks. A 0.3ml/dose subcutaneous injection of rHVT-H5 vaccine was administered to one-day-old ducklings (D1) and another 0.5ml/dose subcutaneous injection of the inactivated MEFLUVAC was administered at 7 days (D7). Four separate challenge experiments were conducted at Days 21, 28, 35 and 42, in which all the vaccinated ducks were challenged with 106EID50/duck of H5N1 HPAI virus (A/chicken/Egypt/128s/2012(H5N1) (clade 2.2.1) via intranasal inoculation. Maternal-derived antibody regression and post-vaccination antibody immune responses were monitored weekly. Ducks vaccinated at 21, 28, 35 and 42 days with the rHVT-H5 and MEFLUVAC vaccines were protected against mortality (80%, 80%, 90% and 90%) and (50%, 70%, 80% and 90%) respectively, against challenges with the H5N1 HPAI virus. The amount of viral shedding and shedding rates were lower in the rHVT-H5 vaccine groups than in the MEFLUVAC groups only in the first two challenge experiments. However, the non-vaccinated groups shed significantly more of the virus than the vaccinated groups. Both rHVT-H5 and MEFLUVAC provide early protection, and rHVT-H5 vaccine in particular provides protection against HPAI challenge.

High-Field Magnetization Study of R_{2} {Fe}_{17} {N}_{2} R 2 Fe 17 N 2 ( R = {Ho} R = Ho and Er) Nitrides

NASA Astrophysics Data System (ADS)

Tereshina, I. S.; Tereshina-Chitrova, E. A.; Pelevin, I. A.; Doerr, M.; Law, J. M.; Verbetski, V. N.; Salamova, A. A.

2018-03-01

The structure and magnetic properties of the nitrided compounds R2Fe_{17}N2 (R = Ho and Er) are studied. The type of crystal structure Th2Ni_{17} is preserved upon nitrogenation, and the relative unit cell volume Δ V{/}V increase exceeds 6%. Magnetic studies are performed in fields up to 60 T at 4.2 K on aligned powder samples. Field-induced spin-reorientation (SR) transitions are observed in the M( H) curves of R2Fe_{17}N2. Unlike the parent R2Fe_{17} compounds, where the magnetization increases in steps as the field grows stronger, R2Fe_{17}N2 demonstrate a gradual increase in magnetization. It is indicative of the change of the SR transition from first to the second type. Extrapolation of magnetization curves to the theoretical value of magnetization in the forced ferromagnetic state yields the coefficient of the inter-sublattice R-Fe exchange interaction. The inter-sublattice exchange is found to decrease upon nitrogenation.

An experimental study of flank wear in the end milling of AISI 316 stainless steel with coated carbide inserts

NASA Astrophysics Data System (ADS)

Odedeyi, P. B.; Abou-El-Hossein, K.; Liman, M.

2017-05-01

Stainless steel 316 is a difficult-to-machine iron-based alloys that contain minimum of about 12% of chromium commonly used in marine and aerospace industry. This paper presents an experimental study of the tool wear propagation variations in the end milling of stainless steel 316 with coated carbide inserts. The milling tests were conducted at three different cutting speeds while feed rate and depth of cut were at (0.02, 0.06 and 01) mm/rev and (1, 2 and 3) mm, respectively. The cutting tool used was TiAlN-PVD-multi-layered coated carbides. The effects of cutting speed, cutting tool coating top layer and workpiece material were investigated on the tool life. The results showed that cutting speed significantly affected the machined flank wears values. With increasing cutting speed, the flank wear values decreased. The experimental results showed that significant flank wear was the major and predominant failure mode affecting the tool life.

Electron-impact excitation of the 1{sup 1}{ital S}{r_arrow}3{sup 1}{ital P} and 1{sup 1}{ital S}{r_arrow}4{sup 1}{ital P} transitions in helium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khakoo, M.A.; Roundy, D.; Rugamas, F.

1996-11-01

The method of electron-photon coincidence is used to {open_quote}{open_quote}resolve{close_quote}{close_quote} the electron-impact excitation of the {ital n}{sup 1}{ital P} levels ({ital n}=3 and 4) from nearby levels. Experimentally determined ratios of the differential cross sections for the electron-impact excitation of 1{sup 1}{ital S}{r_arrow}2{sup 1}{ital P}, to 1{sup 1}{ital S}{r_arrow}3{sup 1}{ital P}, and 4{sup 1}{ital P} transitions are presented at 30-, 40-, and 80-eV incident electron energies. Differential cross sections for the 1{sup 1}{ital S}{r_arrow}3{sup 1}{ital P} and 1{sup 1}{ital S}{r_arrow}4{sup 1}{ital P} transitions are derived by normalizing these ratios to available experimental differential cross sections for the 1{sup 1}{ital S}{r_arrow}2{sup 1}{italmore » P} transition. The ratios and differential cross sections are compared to available theoretical and semiempirical data. {copyright} {ital 1996 The American Physical Society.}« less

Biochar composite membrane for high performance pollutant management: Fabrication, structural characteristics and synergistic mechanisms.

PubMed

Ghaffar, Abdul; Zhu, Xiaoying; Chen, Baoliang

2018-02-01

Biochar, a natural sourced carbon-rich material, has been used commonly in particle shape for carbon sequestration, soil fertility and environmental remediation. Here, we report a facile approach to fabricate freestanding biochar composite membranes for the first time. Wood biochars pyrolyzed at 300 °C and 700 °C were blended with polyvinylidene fluoride (PVdF) in three percentages (10%, 30% and 50%) to construct membranes through thermal phase inversion process. The resultant biochar composite membranes possess high mechanical strength and porous structure with uniform distribution of biochar particles throughout the membrane surface and cross-section. The membrane pure water flux was increased with B300 content (4825-5411 ± 21 L m -2 h -1 ) and B700 content (5823-6895 ± 72 L m -2 h -1 ). The membranes with B300 were more hydrophilic with higher surface free energy (58.84-60.31 mJ m -2 ) in comparison to B700 (56.32-51.91 mJ m -2 ). The biochar composite membranes indicated promising adsorption capacities (47-187 mg g -1 ) to Rhodamine B (RhB) dye. The biochar membranes also exhibited high retention (74-93%) for E. coli bacterial suspensions through filtration. After simple physical cleaning, both the adsorption and sieving capabilities of the biochar composite membranes could be effectively recovered. Synergistic mechanisms of biochar/PVdF in the composite membrane are proposed to elucidate the high performance of the membrane in pollutant management. The multifunctional biochar composite membrane not only effectively prevent the problems caused by directly using biochar particle as sorbent but also can be produced in large scale, indicating great potential for practical applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

Electrocatalytic Oxidation of Formate by [Ni(P R 2 N R' 2 ) 2 (CH 3 CN)] 2+ Complexes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galan, Brandon R.; Schöffel, Julia; Linehan, John C.

2011-08-17

New [Ni(P R 2N R` 2) 2+(CH 3CN)] 2+ complexes with R = Ph, R` = 4-MeOPh; R = Cy, R` = Ph and a mixed ligand [Ni(P R 2N R` 2)(P R`` 2N R` 2)] 2+ with R = Cy, R` = Ph, R`` = Ph have been synthesized and characterized by single crystal X-ray crystallography. These complexes are shown to be electrocatalysts for the oxidation of formate in solution to produce CO 2, protons, and electrons with rates which are first order in catalyst and in formate at formate concentrations below approximately 0.05 M. For the catalysts studied,more » maximum observed turnover frequencies vary from <1.1 s -1 to 12.5 s -1 at room temperature, which are the highest rates yet reported for formate oxidation by homogeneous catalysts. A mechanistic scheme is proposed which involves an initial nickel complex bound <1-OC(O)H followed by a rate limiting hydride transfer step. An acetate complex demonstrating the η 1-OC(O)CH 3 binding mode to nickel has also been synthesized and characterized by single crystal X-ray crystallography. The pendant amines have been demonstrated to be essential for this electrocatalytic activity as no activity toward formate was found for the similar [Ni(depe) 2][BF 4] 2+ (depe = diethylphosphinoethane) complex. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.« less

Chemical vapor deposition of yttria-stabilized zirconia as a thermal barrier coating for gas turbine engines

NASA Astrophysics Data System (ADS)

Varanasi, Venu Gopal

The gas turbine engine uses an yttria-stabilized zirconia (YSZ) coating to provide thermal insulation for its turbine blades. This YSZ coating must be tetragonal in crystal structure, columnar in microstructure, and be 100--250 mum thick to provide for adequate protection for the turbine blades in the severe engine environment. Currently, YSZ coatings are fabricated by electron-beam physical vapor deposition (EB-PVD), but this fabrication method is cost intensive. Chemical vapor deposition (CVD) is a more commercially viable processing method and a possible alternative to EB-PVD. The deposition of tetragonal YSZ from gaseous metal and oxidation sources were studied. A chemical equilibrium analysis modeled the feasibility of depositing tetragonal YSZ for both chloride CVD (Zr-Y-C-O-Cl-H-Inert system) and metal-organic CVD (MOCVD) (Zr-Y-C-O-H system). Pure thermochemical properties and the assessed YSZ phase diagram were used in this analysis. Using the molar input of metals ((nY + nZr) and ( nY/(nY + nZr ) = 0.08)) as bases, equilibrium calculations showed that tetragonal YSZ formation was feasible. Tetragonal YSZ formation was feasible with high oxygen content (nO/(nY + nZr) > 8) and high temperature (T > 100°C) in the case of chloride CVD (Zr-Y-C-O-Cl-H-Inert). Tetragonal YSZ formation was feasible with high oxygen content (nO/( nY + nZr) > 5) and high temperature (T > 950°C) in the case of MOCVD (Zr-Y-C-O-H). Although solid carbon formation did not appear in chloride CVD, additional oxygen (nO/( nY + nZr) > 32) and low hydrogen content relative to carbon (nH/nC < 2) were required to avoid solid carbon formation in MOCVD. Coatings were deposited using a set of base conditions derived from the chemical equilibrium analysis. In chloride CVD, YCl3 was not included because of its low vapor pressure, thus, ZrCl4 was oxidized with the H2-CO2 gas mixture. Monoclinic ZrO2 coatings were deposited at the thermochemically optimized conditions (n O/(nY + nZr) > 8, T > 1004�

Pure antimony film as saturable absorber for Q-switched erbium-doped fiber laser

NASA Astrophysics Data System (ADS)