Measurement of the 19F(α,n)22Na Cross Section for Nuclear Safeguards Science

NASA Astrophysics Data System (ADS)

Lowe, Marcus; Smith, M. S.; Pain, S.; Febbraro, M.; Pittman, S.; Chipps, K. A.; Thompson, S. J.; Grinder, M.; Grzywacz, R.; Smith, K.; Thornsberry, C.; Thompson, P.; Peters, W. A.; Waddell, D.; Blanchard, R.; Carls, A.; Shadrick, S.; Engelhardt, A.; Hertz-Kintish, D.; Allen, N.; Sims, H.

2015-10-01

Enriched uranium is commonly stored in fluoride matrices such as UF6. Alpha decays of uranium in UF6 will create neutrons via the 19F(α,n)22Na reaction. An improved cross section for this reaction will enable improved nondestructive assays of uranium content in storage cylinders at material enrichment facilities. To determine this reaction cross section, we have performed experiments using both forward and inverse kinematic techniques at the University of Notre Dame (forward) and Oak Ridge National Laboratory (inverse). Both experiments utilized the Versatile Array of Neutron Detectors at Low Energy (VANDLE) for neutron detection. The ORNL experiment also used a new ionization chamber for 22Na particle identification. Gating on the 22Na nuclei detected drastically reduced the background counts in the neutron time-of-flight spectra. The latest analysis and results will be presented for 19F beam energies ranging from 20-37 MeV. This work is funded in part by the DOE Office of Nuclear Physics, the National Nuclear Security Administration's Office of Defense Nuclear Nonproliferation R&D, and the NSF.

Fluor-ferro-leakeite, NaNa2(FC2+2Fe3+2Li)Si8O22F2, a new alkali amphibole from the Canada Pinabete pluton, Questa, New Mexico, U.S.A.

USGS Publications Warehouse

Hawthorne, F.C.; Oberti, R.; Ungaretti, L.; Ottolini, L.; Grice, Joel D.; Czamanske, G.K.

1996-01-01

Fluor-ferro-leakeite is a new amphibole species from the Canada Pinabete pluton, Questa, New Mexico, U.S.A.; it occurs in association with quartz, alkali feldspar, acmite, ilmenite, and zircon. It forms as anhedral bluish black crystals elongated along c and up to 1 mm long. It is brittle, H = 6, Dmeas = 3.37 g/cm3, Dcalc = 3.34 g/cm3. In plane-polarized light, it is strongly pleochroic, X = very dark indigo blue, Y = gray blue, Z = yellow green; X ??? c = 10?? (in ??obtuse), Y = b, Z ??? a = 4?? (in ?? obtuse), with absorption X > Y > Z. Fluor-ferro-leakeite is biaxial positive, ?? = 1.675(2), ??= 1.683(2), ?? = 1.694(1); 2V = 87(2)??; dispersion is not visible because of the strong absorption. Fluor-ferro-leakeite is monoclinic, space group C2/m, a = 9.792(1), b = 17.938(1), c = 5.3133(4) A??, ??= 103.87(7)??, V = 906.0(1) A??3, Z = 2. The ten strongest X-ray diffraction lines in the powder pattern are [d(I,hkl)]: 2.710(100,151), 2.536(92,202), 3.404(57,131), 4.481(54,040), 8.426(45,110), 2.985(38,241), 2.585(38,061), 3.122(29,310), 2.165(26,261), and 1.586(25,403). Analysis by a combination of electron microprobe, ion microprobe, and crystal-structure refinement (Hawthorne et al. 1993) gives SiO2 51.12, Al2O3 1.13, TiO2 0.68, Fe2O3 16.73, FeO 8.87, MgO 2.02, MnO 4.51, ZnO 0.57, CaO 0.15, Na2O 9.22, K2O 1.19, Li2O 0.99, F 2.87, H2Ocalc 0.60, sum 99.44 wt%. The formula unit, calculated on the basis of 23 O atoms, is (K0.23Na0.76)(Na1.97Ca0.03)(Mg 0.46Fe2+1.4Mn2+0.59Zn0.07Fe3+1.93-Ti 0.08Al0.02Li0.61])(Si7.81Al 0.19)O22(F1.39OH0.61). A previous crystal-structure refinement (Hawthorne et al. 1993) shows Li to be completely ordered at the M3 site. Fluor-ferro-leakeite, ideally NaNa2(Fe2+2Fe3+2Li)Si8O22F2, is related to leakeite, NaNa2(Mg2Fe3+3Li)Si 8O22(OH)2, by the substitutions Fe2+ ??? Mg and F ??? OH.

Local Integration Ontological Model of Creative Class Migrants for Creative Cities

ERIC Educational Resources Information Center

Sangkakorn, Korawan; Chakpitak, Nopasit; Yodmongkol, Pitipong

2015-01-01

An innovative creative class drives creative cities, urban areas in which diverse cultures are integrated into social and economic functions. The creative city of Chiang Mai, Thailand is renowned for its vibrant Lan Na culture and traditions, and draws new migrants from other areas in Thailand seeking to become part of the creative class. This…

The Na-O anticorrelation in horizontal branch stars. IV. M 22

NASA Astrophysics Data System (ADS)

Gratton, R. G.; Lucatello, S.; Sollima, A.; Carretta, E.; Bragaglia, A.; Momany, Y.; D'Orazi, V.; Cassisi, S.; Salaris, M.

2014-03-01

We obtained high-resolution spectra for 94 candidate stars belonging to the HB of M 22 with FLAMES. Previous works have indicated that this cluster has split subgiant (SGB) and red giant branches (RGB) and hosts two different stellar populations, differing in overall metal abundance and both exhibiting a Na-O anti-correlation. The HB stars we observed span a restricted temperature range (7800 < Teff < 11 000 K), where about 60% of the HB stars of M 22 are. Within our sample, we can distinguish three groups of stars segregated (though contiguous) in colours: Group 1 (49 stars) is metal-poor, N-normal, Na-poor, and O-rich: our abundances for this (cooler) group match those determined for the primordial group of RGB stars (a third of the total) from previous studies very well. Group 2 (23 stars) is still metal-poor, but it is N- and Na-rich, though only very mildly depleted in O. We can identify this intermediate group as the progeny of the metal-poor RGB stars that occupy an intermediate location along the Na-O anti-correlation and include about 10% of the RGB stars. The third group (20 stars) is metal-rich, Na-rich, and O-rich. This hotter group most likely corresponds to the most O-rich component of the previously found metal-rich RGB population (a quarter of the total). We did not observe any severely O-depleted stars and we think that the progeny of these stars falls on the hotter part of the HB. Furthermore, we found that the metal-rich population is also over-abundant in Sr, in agreement with results for corresponding RGB and SGB stars. However, we do not find any significant variation in the ratio between the sum of N and O abundances to Fe. We do not have C abundances for our stars. There is some evidence of an enhancement of He content for Groups 2 and 3 stars (Y = 0.338 ± 0.014 ± 0.05); the error bar due to systematics is large, but a consistent analysis of data for several GCs confirms that stars in these groups within M 22 are probably overabundant in

Virtual 3d City Modeling: Techniques and Applications

NASA Astrophysics Data System (ADS)

Singh, S. P.; Jain, K.; Mandla, V. R.

2013-08-01

3D city model is a digital representation of the Earth's surface and it's related objects such as Building, Tree, Vegetation, and some manmade feature belonging to urban area. There are various terms used for 3D city models such as "Cybertown", "Cybercity", "Virtual City", or "Digital City". 3D city models are basically a computerized or digital model of a city contains the graphic representation of buildings and other objects in 2.5 or 3D. Generally three main Geomatics approach are using for Virtual 3-D City models generation, in first approach, researcher are using Conventional techniques such as Vector Map data, DEM, Aerial images, second approach are based on High resolution satellite images with LASER scanning, In third method, many researcher are using Terrestrial images by using Close Range Photogrammetry with DSM & Texture mapping. We start this paper from the introduction of various Geomatics techniques for 3D City modeling. These techniques divided in to two main categories: one is based on Automation (Automatic, Semi-automatic and Manual methods), and another is Based on Data input techniques (one is Photogrammetry, another is Laser Techniques). After details study of this, finally in short, we are trying to give the conclusions of this study. In the last, we are trying to give the conclusions of this research paper and also giving a short view for justification and analysis, and present trend for 3D City modeling. This paper gives an overview about the Techniques related with "Generation of Virtual 3-D City models using Geomatics Techniques" and the Applications of Virtual 3D City models. Photogrammetry, (Close range, Aerial, Satellite), Lasergrammetry, GPS, or combination of these modern Geomatics techniques play a major role to create a virtual 3-D City model. Each and every techniques and method has some advantages and some drawbacks. Point cloud model is a modern trend for virtual 3-D city model. Photo-realistic, Scalable, Geo-referenced virtual 3

Modelling the urban air quality in Hamburg with the new city-scale chemistry transport model CityChem

NASA Astrophysics Data System (ADS)

Karl, Matthias; Ramacher, Martin; Aulinger, Armin; Matthias, Volker; Quante, Markus

2017-04-01

Air quality modelling plays an important role by providing guidelines for efficient air pollution abatement measures. Currently, most urban dispersion models treat air pollutants as passive tracer substances or use highly simplified chemistry when simulating air pollutant concentrations on the city-scale. The newly developed urban chemistry-transport model CityChem has the capability of modelling the photochemical transformation of multiple pollutants along with atmospheric diffusion to produce pollutant concentration fields for the entire city on a horizontal resolution of 100 m or even finer and a vertical resolution of 24 layers up to 4000 m height. CityChem is based on the Eulerian urban dispersion model EPISODE of the Norwegian Institute for Air Research (NILU). CityChem treats the complex photochemistry in cities using detailed EMEP chemistry on an Eulerian 3-D grid, while using simple photo-stationary equilibrium on a much higher resolution grid (receptor grid), i.e. close to industrial point sources and traffic sources. The CityChem model takes into account that long-range transport contributes to urban pollutant concentrations. This is done by using 3-D boundary concentrations for the city domain derived from chemistry-transport simulations with the regional air quality model CMAQ. For the study of the air quality in Hamburg, CityChem was set-up with a main grid of 30×30 grid cells of 1×1 km2 each and a receptor grid of 300×300 grid cells of 100×100 m2. The CityChem model was driven with meteorological data generated by the prognostic meteorology component of the Australian chemistry-transport model TAPM. Bottom-up inventories of emissions from traffic, industry, households were based on data of the municipality of Hamburg. Shipping emissions for the port of Hamburg were taken from the Clean North Sea Shipping project. Episodes with elevated ozone (O3) were of specific interest for this study, as these are associated with exceedances of the World

Exploring the {sup 22}Ne(p,γ){sup 23}Na reaction at LUNA and at HZDR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cavanna, Francesca; Collaboration: LUNA Collaboration

2014-05-09

The {sup 22}Ne(p,γ){sup 23}Na reaction is involved in the hydrogen burning NeNa cycle. This determines the nucleosynthesis of the Ne and Na isotopes in the Red Giant Branch and Asymptotic Giant Branch phases of stellar evolution. In the energy range relevant for astrophysics (20 keV < E < 600 keV), the {sup 22}Ne(p,γ){sup 23}Na reaction rate is highly uncertain because of the contribution of a large number of resonances never measured directly. A related study is under preparation at the Laboratory for Underground Nuclear Astrophysics (LUNA), in the Gran Sasso National Laboratory, and it will cover the energy range 100more » keV < E < 400 keV. Meanwhile, a measurement at higher energies (i.e. 436 keV) has been carried out at the Tandetron accelerator of the HZDR (Helmholtz Zentrum Dresden Rossendorf) in Germany. Some preliminary results will be presented.« less

Three New Low-Energy Resonances in the 22Ne(p, γ )23Na Reaction

NASA Astrophysics Data System (ADS)

Cavanna, Francesca; Depalo, Rosanna

The neon-sodium (NeNa) cycle drives the synthesis of the elements between 20Ne and 27Al, through a series of proton capture reactions that start from 20Ne, to end with sodium synthesis. This cycle is active in red giant stars (RGB), asymptotic giant branch stars (AGB), in novae as well as in type Ia supernovae. In order to reproduce the observed elemental abundances, the cross sections of the reactions involved in the nucleosynthesis process should be accurately known. The 22Ne(p, γ )23Na reaction rate was very uncertain because of a large number of unobserved resonances lying in the Gamow window. For proton energies below 400 keV, in the literature there were only upper limits for the resonance strengths. A new direct study of the 22Ne(p, γ )23Na reaction has been performed at the Laboratory for Underground Nuclear Astrophysics (LUNA) in Gran Sasso using a windowless gas target and two high-purity germanium detectors. Several resonances have been observed for the first time in a direct experiment.

Dynamic Network Model for Smart City Data-Loss Resilience Case Study: City-to-City Network for Crime Analytics

PubMed Central

Kotevska, Olivera; Kusne, A. Gilad; Samarov, Daniel V.; Lbath, Ahmed; Battou, Abdella

2017-01-01

Today’s cities generate tremendous amounts of data, thanks to a boom in affordable smart devices and sensors. The resulting big data creates opportunities to develop diverse sets of context-aware services and systems, ensuring smart city services are optimized to the dynamic city environment. Critical resources in these smart cities will be more rapidly deployed to regions in need, and those regions predicted to have an imminent or prospective need. For example, crime data analytics may be used to optimize the distribution of police, medical, and emergency services. However, as smart city services become dependent on data, they also become susceptible to disruptions in data streams, such as data loss due to signal quality reduction or due to power loss during data collection. This paper presents a dynamic network model for improving service resilience to data loss. The network model identifies statistically significant shared temporal trends across multivariate spatiotemporal data streams and utilizes these trends to improve data prediction performance in the case of data loss. Dynamics also allow the system to respond to changes in the data streams such as the loss or addition of new information flows. The network model is demonstrated by city-based crime rates reported in Montgomery County, MD, USA. A resilient network is developed utilizing shared temporal trends between cities to provide improved crime rate prediction and robustness to data loss, compared with the use of single city-based auto-regression. A maximum improvement in performance of 7.8% for Silver Spring is found and an average improvement of 5.6% among cities with high crime rates. The model also correctly identifies all the optimal network connections, according to prediction error minimization. City-to-city distance is designated as a predictor of shared temporal trends in crime and weather is shown to be a strong predictor of crime in Montgomery County. PMID:29250476

Dynamic Network Model for Smart City Data-Loss Resilience Case Study: City-to-City Network for Crime Analytics.

PubMed

Kotevska, Olivera; Kusne, A Gilad; Samarov, Daniel V; Lbath, Ahmed; Battou, Abdella

2017-01-01

Today's cities generate tremendous amounts of data, thanks to a boom in affordable smart devices and sensors. The resulting big data creates opportunities to develop diverse sets of context-aware services and systems, ensuring smart city services are optimized to the dynamic city environment. Critical resources in these smart cities will be more rapidly deployed to regions in need, and those regions predicted to have an imminent or prospective need. For example, crime data analytics may be used to optimize the distribution of police, medical, and emergency services. However, as smart city services become dependent on data, they also become susceptible to disruptions in data streams, such as data loss due to signal quality reduction or due to power loss during data collection. This paper presents a dynamic network model for improving service resilience to data loss. The network model identifies statistically significant shared temporal trends across multivariate spatiotemporal data streams and utilizes these trends to improve data prediction performance in the case of data loss. Dynamics also allow the system to respond to changes in the data streams such as the loss or addition of new information flows. The network model is demonstrated by city-based crime rates reported in Montgomery County, MD, USA. A resilient network is developed utilizing shared temporal trends between cities to provide improved crime rate prediction and robustness to data loss, compared with the use of single city-based auto-regression. A maximum improvement in performance of 7.8% for Silver Spring is found and an average improvement of 5.6% among cities with high crime rates. The model also correctly identifies all the optimal network connections, according to prediction error minimization. City-to-city distance is designated as a predictor of shared temporal trends in crime and weather is shown to be a strong predictor of crime in Montgomery County.

Influence of Surface Sorption Processes on Spectral Induced Polarization Evaluated Using in-Situ Monitoring of a Na-22 Tracer

NASA Astrophysics Data System (ADS)

Hao, N.; Moysey, S. M.; Powell, B. A.; Ntarlagiannis, D.

2014-12-01

Spectral Induced Polarization (SIP) has been used to monitor subsurface biogeochemical processes in a variety of lab and field studies. However, there are several competing mechanisms that have been proposed to explain the SIP effect. This work targets the influence of ion sorption to mineral surfaces as a controlling factor on SIP utilizing a pH dependent surface adsorption experiment. In this experiment we use silica gel as an idealized medium where the number of available sites for cation sorption, which in this case is limited to Na+ and H+ ions, is influenced by changes in pH via protonation/deprotonation of silanol groups. The experiment uses 22Na as an in situ tracer as the radioactive decay of this nuclide can be continuously and non-invasively monitored using sensors placed outside of a column. The experiment was conducted by continuously pumping a 0.01M NaCl solution spiked with of 1μCi/L 22Na in to the column under three pH conditions (pH 5.0, 6.0 and 8.0). In the experiment, we observed an increasing number of gamma counts caused by the accumulation of sorbed 22Na in the column as we increased the pH from 5.0 to 6.5, and finally to 8.0. Simultaneously, we observed a linearly correlated (R2 = 0.99) rise in the imaginary conductivity response of the SIP measurements. Using the triple layer electrochemical polarization model for grain polarization to simulate our experimental SIP responses, we found that the estimated surface site density is within a factor of two of that estimated from the mass accumulation of sodium. Since the accumulation of sodium on the silica gel surface is responsible for both the increase in gamma radiation and the change in the electrical response, these observations support the theory that mobile ions in the Stern layer of mineral surfaces provide the primary control on SIP signals in silicate materials.

Nuclear reaction rate uncertainties and the 22Ne( p,gamma)23Na reaction: Classical novae and globular clusters

NASA Astrophysics Data System (ADS)

Kelly, Keegan John

The overall theme of this thesis is the advancement of nuclear astrophysics via the analysis of stellar processes in the presence of varying levels of precision in the available nuclear data. With regard to classical novae, the level of mixing that occurs between the outer layers of the white dwarf core and the solar accreted material in oxygen-neon novae is presently undetermined by stellar models, but the nuclear data relevant to these explosive phenomena are fairly precise. This precision allowed for the identification of a series of elemental ratios indicative of the level of mixing occurring in novae. Direct comparisons of the modelled elemental ratios to observations showed that there is likely to be much less of this mixing than was previously assumed. Thus, our understanding of classical novae was altered via the investigation of the nuclear reactions relevant to this phenomenon. However, this level of experimental precision is rare and large nuclear reaction uncertainties can hinder our understanding of certain astrophysical phenomena. For example, it is commonly believed that uncertainties in the 22Ne(p,g)23Na reaction rate at temperatures relevant to thermally-pulsing asymptotic giant branch stars are largely responsible for our inability to explain the observed sodium-oxygen anti-correlation in globular clusters. With this motivation, resonances in the 22Ne(p,g) 23Na reaction at E_{c.m.} = 458, 417, 178, and 151 keV were measured. The direct-capture contribution was also measured at E_{lab} = 425 keV. It was determined that the 22Ne(p,g)23Na reaction rate in the astrophysically relevant temperature range is dominated by the resonances at 178 and 151 keV and that the total reaction rate is greater than the previously assumed rate by a factor of approximately ˜40 at 0.15 GK. This increased reaction rate impacts the expected nucleosynthesis that occurs in these stars and will shed light onto the origin of this anti-correlation as it is incorporated into

Study of City Landscape Heritage Using Lidar Data and 3d-City Models

NASA Astrophysics Data System (ADS)

Rubinowicz, P.; Czynska, K.

2015-04-01

In contemporary town planning protection of urban landscape is a significant issue. It regards especially those cities, where urban structures are the result of ages of evolution and layering of historical development process. Specific panoramas and other strategic views with historic city dominants can be an important part of the cultural heritage and genius loci. Other hand, protection of such expositions introduces limitations for future based city development. Digital Earth observation techniques creates new possibilities for more accurate urban studies, monitoring of urbanization processes and measuring of city landscape parameters. The paper examines possibilities of application of Lidar data and digital 3D-city models for: a) evaluation of strategic city views, b) mapping landscape absorption limits, and c) determination protection zones, where the urbanization and buildings height should be limited. In reference to this goal, the paper introduces a method of computational analysis of the city landscape called Visual Protection Surface (VPS). The method allows to emulate a virtual surface above the city including protection of a selected strategic views. The surface defines maximum height of buildings in such a way, that no new facility can be seen in any of selected views. The research includes also analyses of the quality of simulations according the form and precision of the input data: airborne Lidar / DSM model and more advanced 3D-city models (incl. semantic of the geometry, like in CityGML format). The outcome can be a support for professional planning of tall building development. Application of VPS method have been prepared by a computer program developed by the authors (C++). Simulations were carried out on an example of the city of Dresden.

Na{sub 6}B{sub 13}O{sub 22.5}, a new noncentrosymmetric sodium borate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Penin, N.; Touboul, M.; Nowogrocki, G.

2005-03-15

Na{sub 6}B{sub 13}O{sub 22.5} (B/Na=2.17) single crystals were obtained by heating, melting and appropriately cooling borax, Na{sub 2}[B{sub 4}O{sub 5}(OH){sub 4}].8H{sub 2}O. Its formula has been determined by the resolution of the structure from single-crystal X-ray diffraction data. The compound crystallizes in the noncentrosymmetric orthorhombic Iba2 space group, with the following unit cell parameters: a=33.359(11)A, b=9.554(3)A, c=10.644(4)A; V=3392.4(19)A{sup 3}; Z=8. The crystal structure was solved from 3226 reflections until R{sub 1}=0.0385. It exhibits a three-dimensional framework built up from BO{sub 3} triangles ({delta}) and BO{sub 4} tetrahedra (T). Two kinds of borate groups can be considered forming two different doublemore » B{sub 3}O{sub 3} rings: two B{sub 4}O{sub 9} (linkage by two boron atoms) and one B{sub 5}O{sub 11} (linkage by one boron atom); the shorthand notation of the new fundamental building block (FBB) existing in this compound is: 13: {infinity}{sup 3} [(5: 3{delta}+2T)+2(4: 2{delta}+2T)]. The discovery of this new borate questions the real number of Na{sub 2}B{sub 4}O{sub 7} varieties. The existence of Na{sub 6}B{sub 13}O{sub 22.5} (B/Na=2.17) and of another recently discovered borate, Na{sub 3}B{sub 7}O{sub 12} (B/Na=2.33; FBB 7: {infinity}{sup 3} [(3: 2{delta}+T)+(3: {delta}+2T)+(1: {delta})], with a composition close to the long-known borate {alpha}-Na{sub 2}B{sub 4}O{sub 7} (B/Na=2; FBB 8: {infinity}{sup 3} [(5: 3{delta}+2T)+(3: 2{delta}+T)], may explain the very complex equilibria reported in the Na{sub 2}O-B{sub 2}O{sub 3} phase diagram, especially in this range of composition.« less

Towards Smart and Resilient City: A Conceptual Model

NASA Astrophysics Data System (ADS)

Arafah, Y.; Winarso, H.; Suroso, D. S. A.

2018-05-01

This paper aims to compare five smart city models selected based on a number of specific criteria. Following the comparison and assessment performed, we draw conclusions and further linkages identifying the components and characters found in resilient cities. The purpose of this analysis is to produce a new approach and concept: the “smart and resilient city.” Through in-depth literature study, this paper analyzes five conceptual smart city models deemed to have a background, point of view, and benchmark towards software group, as they focus on welfare, inclusion, social equality, and competitiveness. Analyzing the strategies, methods, and techniques of five smart city models, this paper concludes that there has been no inclusion of resilience concepts in the assessment, especially in the context of natural disasters. Basically, the models are also interrelated and there are some things that overlap. As a recommendation, there is a model that tries to combine the components and character of smart city and resilient city into one entity that is embedded as a whole in a conceptual picture towards the new concept, the “smart and resilient city”. The concept of smart city and resilient city go hand in hand with each other and thus are interrelated. Therefore, it is imperative to study that concept deeper, in this case primarily in the context of disaster.

Parameter estimation for mathematical models of a nongastric H+(Na+)-K(+)(NH4+)-ATPase.

PubMed

Nadal-Quirós, Mónica; Moore, Leon C; Marcano, Mariano

2015-09-01

The role of nongastric H(+)-K(+)-ATPase (HKA) in ion homeostasis of macula densa (MD) cells is an open question. To begin to explore this issue, we developed two mathematical models that describe ion fluxes through a nongastric HKA. One model assumes a 1H(+):1K(+)-per-ATP stoichiometry; the other assumes a 2H(+):2K(+)-per-ATP stoichiometry. Both models include Na+ and NH4+ competitive binding with H+ and K+, respectively, a characteristic observed in vitro and in situ. Model rate constants were obtained by minimizing the distance between model and experimental outcomes. Both 1H(+)(1Na(+)):1K(+)(1NH4 (+))-per-ATP and 2H(+)(2Na(+)):2K(+)(2NH4 (+))-per-ATP models fit the experimental data well. Using both models, we simulated ion net fluxes as a function of cytosolic or luminal ion concentrations typical for the cortical thick ascending limb and MD region. We observed that (1) K+ and NH4+ flowed in the lumen-to-cytosol direction, (2) there was competitive behavior between luminal K+ and NH4+ and between cytosolic Na+ and H+, 3) ion fluxes were highly sensitive to changes in cytosolic Na+ or H+ concentrations, and 4) the transporter does mostly Na+ / K+ exchange under physiological conditions. These results support the concept that nongastric HKA may contribute to Na+ and pH homeostasis in MD cells. Furthermore, in both models, H+ flux reversed at a luminal pH that was <5.6. Such reversal led to Na+ / H+ exchange for a luminal pH of <2 and 4 in the 1:1-per-ATP and 2:2-per-ATP models, respectively. This suggests a novel role of nongastric HKA in cell Na+ homeostasis in the more acidic regions of the renal tubules. Copyright © 2015 the American Physiological Society.

Parameter estimation for mathematical models of a nongastric H+(Na+)-K+(NH4+)-ATPase

PubMed Central

Nadal-Quirós, Mónica; Moore, Leon C.

2015-01-01

The role of nongastric H+-K+-ATPase (HKA) in ion homeostasis of macula densa (MD) cells is an open question. To begin to explore this issue, we developed two mathematical models that describe ion fluxes through a nongastric HKA. One model assumes a 1H+:1K+-per-ATP stoichiometry; the other assumes a 2H+:2K+-per-ATP stoichiometry. Both models include Na+ and NH4+ competitive binding with H+ and K+, respectively, a characteristic observed in vitro and in situ. Model rate constants were obtained by minimizing the distance between model and experimental outcomes. Both 1H+(1Na+):1K+(1NH4+)-per-ATP and 2H+(2Na+):2K+(2NH4+)-per-ATP models fit the experimental data well. Using both models, we simulated ion net fluxes as a function of cytosolic or luminal ion concentrations typical for the cortical thick ascending limb and MD region. We observed that 1) K+ and NH4+ flowed in the lumen-to-cytosol direction, 2) there was competitive behavior between luminal K+ and NH4+ and between cytosolic Na+ and H+, 3) ion fluxes were highly sensitive to changes in cytosolic Na+ or H+ concentrations, and 4) the transporter does mostly Na+/K+ exchange under physiological conditions. These results support the concept that nongastric HKA may contribute to Na+ and pH homeostasis in MD cells. Furthermore, in both models, H+ flux reversed at a luminal pH that was <5.6. Such reversal led to Na+/H+ exchange for a luminal pH of <2 and 4 in the 1:1-per-ATP and 2:2-per-ATP models, respectively. This suggests a novel role of nongastric HKA in cell Na+ homeostasis in the more acidic regions of the renal tubules. PMID:26109090

Study for Nuclear Structures of 22-35Na Isotopes via Measurements of Reaction Cross Sections

NASA Astrophysics Data System (ADS)

Suzuki, Shinji

2014-09-01

T. Ohtsubo, M. Nagashima, T. Ogura, Y. Shimbara (Grad. Sch. of Sc., Niigata Univ.), M.Takechi, H. Geissel, M. Winkler (GSI), D. Nishimura, T. Sumikama (Dept. of Phys., Tokyo Univ. of Sc.), M. Fukuda, M. Mihara, H. Uenishi (Dept. of Phys., Osaka Univ.), T. Kuboki, T. Suzuki, T. Yamaguchi, H. Furuki, C. S. Lee, K. Sato (Dept. of Phys., Saitama Univ.), A. Ozawa, H. Ohnishi, T. Moriguchi, S. Fukuda, Y. Ishibashi, D. Nagae, R. Nishikiori, T. Niwa (Inst. of Phys., Univ. of Tsukuba), N. Aoi (RCNP), Rui-Jiu Chen, N. Inabe, D. Kameda, T. Kubo, M. Lantz, T. Ohnishi, K. Okumura, H. Sakurai, H. Suzuki, H. Takeda, S. Takeuchi, K. Tanaka, Y. Yanagisawa (RIKEN), De-Qing Fang, Yu-Gang Ma (SINAP), T. Izumikawa (RI Ctr., Niigata Univ.), and S. Momota (Fac. of Engn., Kochi Univ. of Tech.) Reaction cross sections (σR) for 22-35Na isotopes have been measured at around 240 MeV/nucleon. The σR for 22-35Na were measured for the first time. Enhancement in cross sections is clearly observed from the systematics for stable nuclei, for isotopes with large mass numbers. These enhancement can be mainly ascribed to the nuclear deformation. We will discuss the nuclear structure (neutron skin, nuclear shell structure) for neutron-excess Na isotopes. T. Ohtsubo, M. Nagashima, T. Ogura, Y. Shimbara (Grad. Sch. of Sc., Niigata Univ.), M.Takechi, H. Geissel, M. Winkler (GSI), D. Nishimura, T. Sumikama (Dept. of Phys., Tokyo Univ. of Sc.), M. Fukuda, M. Mihara, H. Uenishi (Dept. of Phys., Osaka Univ.), T. Kuboki, T. Suzuki, T. Yamaguchi, H. Furuki, C. S. Lee, K. Sato (Dept. of Phys., Saitama Univ.), A. Ozawa, H. Ohnishi, T. Moriguchi, S. Fukuda, Y. Ishibashi, D. Nagae, R. Nishikiori, T. Niwa (Inst. of Phys., Univ. of Tsukuba), N. Aoi (RCNP), Rui-Jiu Chen, N. Inabe, D. Kameda, T. Kubo, M. Lantz, T. Ohnishi, K. Okumura, H. Sakurai, H. Suzuki, H. Takeda, S. Takeuchi, K. Tanaka, Y. Yanagisawa (RIKEN), De-Qing Fang, Yu-Gang Ma (SINAP), T. Izumikawa (RI Ctr., Niigata Univ.), and S. Momota (Fac. of Engn

Measurement of the 21Na(p,{gamma})22Mg Reaction with the Dragon Facility at TRIUMF-ISAC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, A.A.; Bishop, S.; D'Auria, J.M.

2003-08-26

The DRAGON recoil separator facility, designed to measure the rates of radiative proton and alpha capture reactions important for nuclear astrophysics, is now operational at the TRIUMF-ISAC radioactive beam facility in Vancouver, Canada. We report on first measurements of the 21Na(p,{gamma})22Mg reaction rate with radioactive beams of 21Na.

Illustrative visualization of 3D city models

NASA Astrophysics Data System (ADS)

Doellner, Juergen; Buchholz, Henrik; Nienhaus, Marc; Kirsch, Florian

2005-03-01

This paper presents an illustrative visualization technique that provides expressive representations of large-scale 3D city models, inspired by the tradition of artistic and cartographic visualizations typically found in bird"s-eye view and panoramic maps. We define a collection of city model components and a real-time multi-pass rendering algorithm that achieves comprehensible, abstract 3D city model depictions based on edge enhancement, color-based and shadow-based depth cues, and procedural facade texturing. Illustrative visualization provides an effective visual interface to urban spatial information and associated thematic information complementing visual interfaces based on the Virtual Reality paradigm, offering a huge potential for graphics design. Primary application areas include city and landscape planning, cartoon worlds in computer games, and tourist information systems.

75 FR 41104 - Airworthiness Directives; Robinson Helicopter Company (Robinson) Model R22, R22 Alpha, R22 Beta...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-15

...-0711; Directorate Identifier 2008-SW-25-AD] RIN 2120-AA64 Airworthiness Directives; Robinson Helicopter Company (Robinson) Model R22, R22 Alpha, R22 Beta, and R22 Mariner Helicopters, and Model R44, and R44 II...). SUMMARY: This document proposes adopting a new airworthiness directive (AD) for Robinson Model R22, R22...

Integrating Dynamic Data and Sensors with Semantic 3D City Models in the Context of Smart Cities

NASA Astrophysics Data System (ADS)

Chaturvedi, K.; Kolbe, T. H.

2016-10-01

Smart cities provide effective integration of human, physical and digital systems operating in the built environment. The advancements in city and landscape models, sensor web technologies, and simulation methods play a significant role in city analyses and improving quality of life of citizens and governance of cities. Semantic 3D city models can provide substantial benefits and can become a central information backbone for smart city infrastructures. However, current generation semantic 3D city models are static in nature and do not support dynamic properties and sensor observations. In this paper, we propose a new concept called Dynamizer allowing to represent highly dynamic data and providing a method for injecting dynamic variations of city object properties into the static representation. The approach also provides direct capability to model complex patterns based on statistics and general rules and also, real-time sensor observations. The concept is implemented as an Application Domain Extension for the CityGML standard. However, it could also be applied to other GML-based application schemas including the European INSPIRE data themes and national standards for topography and cadasters like the British Ordnance Survey Mastermap or the German cadaster standard ALKIS.

Modeling fractal cities using the correlated percolation model.

NASA Astrophysics Data System (ADS)

Makse, Hernán A.; Havlin, Shlomo; Stanley, H. Eugene

1996-03-01

Cities grow in a way that might be expected to resemble the growth of two-dimensional aggregates of particles, and this has led to recent attempts to model urban growth using ideas from the statistical physics of clusters. In particular, the model of diffusion limited aggregation (DLA) has been invoked to rationalize the apparently fractal nature of urban morphologies(M. Batty and P. Longley, Fractal Cities) (Academic, San Diego, 1994). The DLA model predicts that there should exist only one large fractal cluster, which is almost perfectly screened from incoming 'development units' (representing, for example, people, capital or resources), so that almost all of the cluster growth takes place at the tips of the cluster's branches. We show that an alternative model(H. A. Makse, S. Havlin, H. E. Stanley, Nature 377), 608 (1995), in which development units are correlated rather than being added to the cluster at random, is better able to reproduce the observed morphology of cities and the area distribution of sub-clusters ('towns') in an urban system, and can also describe urban growth dynamics. Our physical model, which corresponds to the correlated percolation model in the presence of a density gradient, is motivated by the fact that in urban areas development attracts further development. The model offers the possibility of predicting the global properties (such as scaling behavior) of urban morphologies.

75 FR 71532 - Airworthiness Directives; Robinson Helicopter Company (Robinson) Model R22, R22 Alpha, R22 Beta...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-24

... Airworthiness Directives; Robinson Helicopter Company (Robinson) Model R22, R22 Alpha, R22 Beta, and R22 Mariner... rule. SUMMARY: This amendment adopts a new airworthiness directive (AD) for Robinson Model R22, R22... Robinson Helicopter Company, 2901 Airport Drive, Torrance, California 90505, telephone (310) 539-0508, fax...

NoSQL Based 3D City Model Management System

NASA Astrophysics Data System (ADS)

Mao, B.; Harrie, L.; Cao, J.; Wu, Z.; Shen, J.

2014-04-01

To manage increasingly complicated 3D city models, a framework based on NoSQL database is proposed in this paper. The framework supports import and export of 3D city model according to international standards such as CityGML, KML/COLLADA and X3D. We also suggest and implement 3D model analysis and visualization in the framework. For city model analysis, 3D geometry data and semantic information (such as name, height, area, price and so on) are stored and processed separately. We use a Map-Reduce method to deal with the 3D geometry data since it is more complex, while the semantic analysis is mainly based on database query operation. For visualization, a multiple 3D city representation structure CityTree is implemented within the framework to support dynamic LODs based on user viewpoint. Also, the proposed framework is easily extensible and supports geoindexes to speed up the querying. Our experimental results show that the proposed 3D city management system can efficiently fulfil the analysis and visualization requirements.

Electromagnetic moments of 22F

NASA Astrophysics Data System (ADS)

Mihara, M.; Matsuta, K.; Komurasaki, J.; Hirano, H.; Nishimura, D.; Momota, S.; Ohtsubo, T.; Izumikawa, T.; Shimbara, Y.; Kubo, T.; Kameda, D.; Zhou, Dongmei; Zheng, Yongnan; Yuan, Daqing; Zhu, Shengyun; Kitagawa, A.; Kanazawa, M.; Torikoshi, M.; Sato, S.; Nagatomo, T.; Matsumiya, R.; Ishikawa, D.; Fukuda, M.; Minamisono, T.; Nojiri, Y.; Alonso, J. R.; Crebs, G. F.; Symons, T. J. M.

2010-03-01

The magnetic dipole (μ) and electric quadrupole (Q) moments of short-lived nucleus 22F (Iπ=4+, T=4.2s) have been measured for the first time by means of the β-NMR technique. A spin polarized 22F beam was produced through the charge exchange reaction of 22Ne and was implanted into single crysltals of NaF and MgF2 for μ and Q measurements, respectively. As a result, |μ(F22)|=(2.69443±0.00039)μ and |Q(F22)|=(3±2)mb was obtained. These values are well reproduced by the shell model calculations.

On the entropy of glaucophane Na2Mg3Al2Si8O22(OH)2

USGS Publications Warehouse

Robie, R.A.; Hemingway, B.S.; Gillet, P.; Reynard, B.

1991-01-01

The heat capacity of glaucophane from the Sesia-Lanza region of Italy having the approximate composition (Na1.93Ca0.05Fe0.02) (Mg2.60Fe0.41) (Al1.83Fe0.15Cr0.01) (Si7.92Al0.08)O22(OH)2 was measured by adiabatic calorimetry between 4.6 and 359.4 K. After correcting the Cp0data to values for ideal glaucophane, Na2Mg3Al2Si8O22(OH)2 the third-law entropy S2980-S00was calculated to be 541.2??3.0 J??mol-1??K-1. Our value for S2980-S00is 12.0 J??mol-1??K-1 (2.2%) smaller than the value of Likhoydov et al. (1982), 553.2??3.0, is within 6.2 J??mol-1??K-1 of the value estimated by Holland (1988), and agrees remarkably well with the value calculated by Gillet et al. (1989) from spectroscopic data, 539 J??mol-1??K-1. ?? 1991 Springer-Verlag.

Enhanced LOD Concepts for Virtual 3d City Models

NASA Astrophysics Data System (ADS)

Benner, J.; Geiger, A.; Gröger, G.; Häfele, K.-H.; Löwner, M.-O.

2013-09-01

Virtual 3D city models contain digital three dimensional representations of city objects like buildings, streets or technical infrastructure. Because size and complexity of these models continuously grow, a Level of Detail (LoD) concept effectively supporting the partitioning of a complete model into alternative models of different complexity and providing metadata, addressing informational content, complexity and quality of each alternative model is indispensable. After a short overview on various LoD concepts, this paper discusses the existing LoD concept of the CityGML standard for 3D city models and identifies a number of deficits. Based on this analysis, an alternative concept is developed and illustrated with several examples. It differentiates between first, a Geometric Level of Detail (GLoD) and a Semantic Level of Detail (SLoD), and second between the interior building and its exterior shell. Finally, a possible implementation of the new concept is demonstrated by means of an UML model.

Integrated city as a model for a new wave urban tourism

NASA Astrophysics Data System (ADS)

Ariani, V.

2018-03-01

Cities are a major player for an urban tourism destination. Massive tourism movement for urban tourism gains competitiveness to the city with similar characteristic. The new framework model for new wave urban tourism is crucial to give more experience to the tourist and valuing for the city itself. The integrated city is the answer for creating a new model for an urban tourism destination. The purpose of this preliminary research is to define integrated city framework for urban tourism development. It provides a rationale for tourism planner pursuing an innovative approach, competitive advantages, and general urban tourism destination model. The methodology applies to this research includes desk survey, literature review and focus group discussion. A conceptual framework is proposed, discussed and exemplified. The framework model adopts a place-based approach to tourism destination and suggests an integrated city model for urban tourism development. This model is a tool for strategy making in re-invention integrated city as an urban tourism destination.

Production of Na-22 and Other Radionuclides by Neutrons in Al, SiO2, Si, Ti, Fe and Ni Targets: Implications for Cosmic Ray Studies

NASA Technical Reports Server (NTRS)

Sisterson, J. M.; Jones, D. T. L.; Binns, P. J.; Langen, K.; Schroeder, I.; Buthelezi, Z.; Latti, E.; Brooks, F. D.; Buffler, A.; Allie, M. S.;

Complex magnetic differentiation of cobalts in Na x CoO2 with 22 K Néel temperature

NASA Astrophysics Data System (ADS)

Mukhamedshin, I. R.; Gilmutdinov, I. F.; Salosin, M. A.; Alloul, H.

2014-06-01

Single crystals of sodium cobaltates Na x CoO2 with x ≈ 0.8 were grown by the floating zone technique. Using electrochemical Na de-intercalation method we reduced the sodium content in the as-grown crystals down to pure phase with 22 K Néel temperature and x ≈ 0.77. The 59Co NMR study in the paramagnetic state of the T N = 22 K phase permitted us to evidence that at least 6 Co sites are differentiated. They could be separated by their magnetic behavior into three types: a single site with cobalt close to non-magnetic Co3+, two sites with the most magnetic cobalts in the system, and the remaining three sites displaying an intermediate behavior. This unusual magnetic differentiation calls for more detailed NMR experiments on our well characterized samples.

Alternative Fuels Data Center: Clean Cities Helps National Parks Model

Science.gov Websites

Sustainable Transportation Clean Cities Helps National Parks Model Sustainable Transportation to someone by E-mail Share Alternative Fuels Data Center: Clean Cities Helps National Parks Model Sustainable Transportation on Facebook Tweet about Alternative Fuels Data Center: Clean Cities Helps National

Extending 3D city models with legal information

NASA Astrophysics Data System (ADS)

Frank, A. U.; Fuhrmann, T.; Navratil, G.

2012-10-01

3D city models represent existing physical objects and their topological and functional relations. In everyday life the rights and responsibilities connected to these objects, primarily legally defined rights and obligations but also other socially and culturally established rights, are of importance. The rights and obligations are defined in various laws and it is often difficult to identify the rules applicable for a certain case. The existing 2D cadastres show civil law rights and obligations and plans to extend them to provide information about public law restrictions for land use are in several countries under way. It is tempting to design extensions to the 3D city models to provide information about legal rights in 3D. The paper analyses the different types of information that are needed to reduce conflicts and to facilitate decisions about land use. We identify the role 3D city models augmented with planning information in 3D can play, but do not advocate a general conversion from 2D to 3D for the legal cadastre. Space is not anisotropic and the up/down dimension is practically very different from the two dimensional plane - this difference must be respected when designing spatial information systems. The conclusions are: (1) continue the current regime for ownership of apartments, which is not ownership of a 3D volume, but co-ownership of a building with exclusive use of some rooms; such exclusive use rights could be shown in a 3D city model; (2) ownership of 3D volumes for complex and unusual building situations can be reported in a 3D city model, but are not required everywhere; (3) indicate restrictions for land use and building in 3D city models, with links to the legal sources.

Modeling falling groundwater tables in major cities of the world

NASA Astrophysics Data System (ADS)

Sutanudjaja, E.; Erkens, G.

2015-12-01

Groundwater use and its over-consumption are one of the major drivers in the hydrology of many major cities in the world, particularly in delta regions. Yet, a global assessment to identify cities with declining groundwater table problems has not been done yet. In this study we used the global hydrological model PCR-GLOBWB (10 km resolution, for 1960-2010). Using this model, we globally calculated groundwater recharge and river discharge/surface water levels, as well as global water demand and abstraction from ground- and surface water resources. The output of PCR-GLOBWB model was then used to force a groundwater MODFLOW-based model simulating spatio-temporal groundwater head dynamics, including groundwater head declines in all major cities - mainly in delta regions - due to escalation in abstraction of groundwater to meet increasing water demand. Using these coupled models, we managed to identify a number of critical cities having groundwater table falling rates above 50 cm/year (average in 2000-2010), such as Barcelona, Houston, Los Angeles, Mexico City, New York, Rome and many large cities in China, Libya, India and Pakistan, as well as in Middle East and Central Asia regions. However, our simulation results overestimate the depletion rates in San Jose, Tokyo, Venice, and other cities where groundwater usages have been aggressively managed and replaced by importing surface water from other places. Moreover, our simulation might underestimate the declining groundwater head trends in some familiar cases, such as Bangkok (12 cm/year), Ho Chi Minh City (34 cm/year), and Jakarta (26 cm/year). The underestimation was due to an over-optimistic model assumption in allocating surface water for satisfying urban water needs. In reality, many big cities, although they are located in wet regions and have abundant surface water availability, still strongly rely on groundwater sources due to inadequate facilities to treat and distribute surface water resources.

Modeling falling groundwater tables in major cities of the world

NASA Astrophysics Data System (ADS)

Sutanudjaja, Edwin; Erkens, Gilles

2016-04-01

Groundwater use and its over-consumption are one of the major drivers in the hydrology of many major cities in the world, particularly in delta regions. Yet, a global assessment to identify cities with declining groundwater table problems has not been done yet. In this study we used the global hydrological model PCR-GLOBWB (10 km resolution, for 1960-2010). Using this model, we globally calculated groundwater recharge and river discharge/surface water levels, as well as global water demand and abstraction from ground- and surface water resources. The output of PCR-GLOBWB model was then used to force a groundwater MODFLOW-based model simulating spatio-temporal groundwater head dynamics, including groundwater head declines in all major cities - mainly in delta regions - due to escalation in abstraction of groundwater to meet increasing water demand. Using these coupled models, we managed to identify a number of critical cities having groundwater table falling rates above 50 cm/year (average in 2000-2010), such as Barcelona, Houston, Los Angeles, Mexico City, New York, Rome and many large cities in China, Libya, India and Pakistan, as well as in Middle East and Central Asia regions. However, our simulation results overestimate the depletion rates in San Jose, Tokyo, Venice, and other cities where groundwater usages have been aggressively managed and replaced by importing surface water from other places. Moreover, our simulation might underestimate the declining groundwater head trends in some familiar cases, such as Bangkok (12 cm/year), Ho Chi Minh City (34 cm/year), and Jakarta (26 cm/year). The underestimation was due to an over-optimistic model assumption in allocating surface water for satisfying urban water needs. In reality, many big cities, although they are located in wet regions and have abundant surface water availability, still strongly rely on groundwater sources due to inadequate facilities to treat and distribute surface water resources.

Dengue forecasting in São Paulo city with generalized additive models, artificial neural networks and seasonal autoregressive integrated moving average models.

PubMed

Baquero, Oswaldo Santos; Santana, Lidia Maria Reis; Chiaravalloti-Neto, Francisco

2018-01-01

Globally, the number of dengue cases has been on the increase since 1990 and this trend has also been found in Brazil and its most populated city-São Paulo. Surveillance systems based on predictions allow for timely decision making processes, and in turn, timely and efficient interventions to reduce the burden of the disease. We conducted a comparative study of dengue predictions in São Paulo city to test the performance of trained seasonal autoregressive integrated moving average models, generalized additive models and artificial neural networks. We also used a naïve model as a benchmark. A generalized additive model with lags of the number of cases and meteorological variables had the best performance, predicted epidemics of unprecedented magnitude and its performance was 3.16 times higher than the benchmark and 1.47 higher that the next best performing model. The predictive models captured the seasonal patterns but differed in their capacity to anticipate large epidemics and all outperformed the benchmark. In addition to be able to predict epidemics of unprecedented magnitude, the best model had computational advantages, since its training and tuning was straightforward and required seconds or at most few minutes. These are desired characteristics to provide timely results for decision makers. However, it should be noted that predictions are made just one month ahead and this is a limitation that future studies could try to reduce.

First-principles study of the electronic properties and discharge profile of AgNa(VO2F2)2

NASA Astrophysics Data System (ADS)

Onoue, Masatoshi; Trimarchi, Giancarlo; Freeman, Arthur J.

2014-03-01

Implantable cardiac defibrillators (ICDs) require batteries with high capacities and high discharge rates to ensure the optimal operation of the device over several years. Ag2V4O11 has been a cathode material of choice for the ICDs owing to its high capacity and fast rate of electronic discharge. To reduce ICD size and improve ICD performance, a new cathode material would need to display a higher volumetric capacity and redox potential. Recently, the new cathode compound AgNa(VO2F2)2 (SSVOF) was synthesized and displayed favorable voltage for sodium-ion batteries. However, the discharge reaction has been unclear. In this presentation, we study the discharge reaction of SSVOF through DFT calculations. All calculations are performed within the PAW method using the GGA and GGA + U functionals. Among several possible reactions, we focus on the reaction Ag X + A --> AX + Ag, where X is Na(VO2F2)2 and A is Li or Na. In this reaction, the discharge occurs by replacing Ag with A. The calculated discharge potential for Li is 3.3 V in GGA and 2.9 V in GGA + U and that for Na is 3.1 V in GGA and 2.8 V in GGA + U . These values are consistent with the experimental ones. Supported by the DOE ER46536 Program.

Race, urban governance, and crime control: creating model cities.

PubMed

Brown, Elizabeth

2010-01-01

In the late 1960s and early 1970s, the city of Seattle received federal Department of Housing and Urban Development “Model cities” funds to address issues of racial disenfranchisement in the city. Premised under the “Great Society” ethos, Model cities sought to remedy the strained relationship between local governments and disenfranchised urban communities. Though police-community relations were not initially slated as an area of concern in the city's grant application, residents of the designated “model neighborhood” pressed for the formation of a law and justice task force to address the issue. This article examines the process and outcome of the two law-and-justice projects proposed by residents of the designated “model neighborhood”: the Consumer Protection program and the Community Service Officer project. Drawing on the work of legal geographies scholars, I argue that the failure of each of these efforts to achieve residents' intentions stems from the geographical imagination of urban problems. Like law-and-order projects today, the geographical imagination of the model neighborhood produced a discourse of exceptionality that subjected residents to extraordinary state interventions. The Model cities project thus provides an example of a “history of the present” of mass incarceration in which the geographical imagination of crime helps facilitate the re-creation of a racialized power structure.

The 18Ne(α,p)21Na breakout reaction in x-ray bursts: Experimental determination of spin-parities for α resonances in 22Mg via resonant elastic scattering of 21Na+p

NASA Astrophysics Data System (ADS)

He, J. J.; Zhang, L. Y.; Parikh, A.; Xu, S. W.; Yamaguchi, H.; Kahl, D.; Kubono, S.; Hu, J.; Ma, P.; Chen, S. Z.; Wakabayashi, Y.; Sun, B. H.; Wang, H. W.; Tian, W. D.; Chen, R. F.; Guo, B.; Hashimoto, T.; Togano, Y.; Hayakawa, S.; Teranishi, T.; Iwasa, N.; Yamada, T.; Komatsubara, T.

2013-07-01

The 18Ne(α,p)21Na reaction provides a pathway for breakout from the hot CNO cycles to the rp process in type-I x-ray bursts. To better determine this astrophysical reaction rate, the resonance parameters of the compound nucleus 22Mg have been investigated by measuring the resonant elastic scattering of 21Na+p. An 89 MeV 21Na radioactive ion beam was produced at the CNS Radioactive Ion Beam Separator and bombarded an 8.8 mg/cm2 thick polyethylene target. The recoiled protons were measured at scattering angles of θc.m.≈175∘ and 152∘ by three ΔE-E silicon telescopes. The excitation function was obtained with a thick-target method over energies Ex(22Mg) = 5.5-9.2 MeV. The resonance parameters have been determined through an R-matrix analysis. For the first time, the Jπ values for ten states above the α threshold in 22Mg have been experimentally determined in a single consistent measurement. We have made three new Jπ assignments and confirmed seven of the ten tentative assignments in the previous work. The 18Ne(α,p)21Na reaction rate has been recalculated, and the astrophysical impact of our new rate has been investigated through one-zone postprocessing x-ray burst calculations. We find that the 18Ne(α,p)21Na rate significantly affects the peak nuclear energy generation rate and the onset temperature of this breakout reaction in these phenomena.

IR characteristic simulation of city scenes based on radiosity model

NASA Astrophysics Data System (ADS)

Xiong, Xixian; Zhou, Fugen; Bai, Xiangzhi; Yu, Xiyu

2013-09-01

Reliable modeling for thermal infrared (IR) signatures of real-world city scenes is required for signature management of civil and military platforms. Traditional modeling methods generally assume that scene objects are individual entities during the physical processes occurring in infrared range. However, in reality, the physical scene involves convective and conductive interactions between objects as well as the radiations interactions between objects. A method based on radiosity model describes these complex effects. It has been developed to enable an accurate simulation for the radiance distribution of the city scenes. Firstly, the physical processes affecting the IR characteristic of city scenes were described. Secondly, heat balance equations were formed on the basis of combining the atmospheric conditions, shadow maps and the geometry of scene. Finally, finite difference method was used to calculate the kinetic temperature of object surface. A radiosity model was introduced to describe the scattering effect of radiation between surface elements in the scene. By the synthesis of objects radiance distribution in infrared range, we could obtain the IR characteristic of scene. Real infrared images and model predictions were shown and compared. The results demonstrate that this method can realistically simulate the IR characteristic of city scenes. It effectively displays the infrared shadow effects and the radiation interactions between objects in city scenes.

Remote Sensing Technologies and Geospatial Modelling Hierarchy for Smart City Support

NASA Astrophysics Data System (ADS)

Popov, M.; Fedorovsky, O.; Stankevich, S.; Filipovich, V.; Khyzhniak, A.; Piestova, I.; Lubskyi, M.; Svideniuk, M.

2017-12-01

The approach to implementing the remote sensing technologies and geospatial modelling for smart city support is presented. The hierarchical structure and basic components of the smart city information support subsystem are considered. Some of the already available useful practical developments are described. These include city land use planning, urban vegetation analysis, thermal condition forecasting, geohazard detection, flooding risk assessment. Remote sensing data fusion approach for comprehensive geospatial analysis is discussed. Long-term city development forecasting by Forrester - Graham system dynamics model is provided over Kiev urban area.

Spatio-temporal synchrony of influenza in cities across Israel: the "Israel is one city" hypothesis.

PubMed

Barnea, Oren; Huppert, Amit; Katriel, Guy; Stone, Lewi

2014-01-01

We analysed an 11-year dataset (1998-2009) of Influenza-Like Illness (ILI) that was based on surveillance of ∽23% of Israel's population. We examined whether the level of synchrony of ILI epidemics in Israel's 12 largest cities is high enough to view Israel as a single epidemiological unit. Two methods were developed to assess the synchrony: (1) City-specific attack rates were fitted to a simple model in order to estimate the temporal differences in attack rates and spatial differences in reporting rates of ILI. The model showed good fit to the data (R2  =  0.76) and revealed considerable differences in reporting rates of ILI in different cities (up to a factor of 2.2). (2) A statistical test was developed to examine the null hypothesis (H0) that ILI incidence curves in two cities are essentially identical, and was tested using ILI data. Upon examining all possible pairs of incidence curves, 77.4% of pairs were found not to be different (H0 was not rejected). It was concluded that all cities generally have the same attack rate and follow the same epidemic curve each season, although the attack rate changes from season to season, providing strong support for the "Israel is one city" hypothesis. The cities which were the most out of synchronization were Bnei Brak, Beersheba and Haifa, the latter two being geographically remote from all other cities in the dataset and the former geographically very close to several other cities but socially separate due to being populated almost exclusively by ultra-orthodox Jews. Further evidence of assortative mixing of the ultra-orthodox population can be found in the 2001-2002 season, when ultra-orthodox cities and neighborhoods showed distinctly different incidence curves compared to the general population.

Enabling Energy-Awareness in the Semantic 3d City Model of Vienna

NASA Astrophysics Data System (ADS)

Agugiaro, G.

2016-09-01

This paper presents and discusses the first results regarding selection, analysis, preparation and eventual integration of a number of energy-related datasets, chosen in order to enrich a CityGML-based semantic 3D city model of Vienna. CityGML is an international standard conceived specifically as information and data model for semantic city models at urban and territorial scale. The still-in-development Energy Application Domain Extension (ADE) is a CityGML extension conceived to specifically model, manage and store energy-related features and attributes for buildings. The work presented in this paper is embedded within the European Marie-Curie ITN project "CINERGY, Smart cities with sustainable energy systems", which aims, among the rest, at developing urban decision making and operational optimisation software tools to minimise non-renewable energy use in cities. Given the scope and scale of the project, it is therefore vital to set up a common, unique and spatio-semantically coherent urban data model to be used as information hub for all applications being developed. This paper reports about the experiences done so far, it describes the test area in Vienna, Austria, and the available data sources, it shows and exemplifies the main data integration issues, the strategies developed to solve them in order to obtain the enriched 3D city model. The first results as well as some comments about their quality and limitations are presented, together with the discussion regarding the next steps and some planned improvements.

Abundances in the red giants of M13 and M22

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lehnert, M.D.; Bell, R.A.; Cohen, J.G.

Abundances of Ca, Na, and Fe are derived for 10 red giant branch stars in the globular clusters M13 and M22, by means of model atmosphere analyses of high-dispersion spectra. It was found that M13 and M22 represent two different types of globular clusters. M13 is similar to M92 and many other globular clusters in that it displays variations in CH and CN band strengths, while showing no variation in either Ca or Fe abundance. The Na abundance was found to vary and its variation correlates with CN band strengths. This suggests that the source of the observed CN bandmore » strength variation is the same as that of the Na variation. M22, on the other hand, is similar to Omega Cen, in that it displays variations in Ca, Na, and Fe abundances, and these variations correlate with variations in CH and CN band strengths. These correlations suggest that the cause of the variations in M22 is largely primordial, and that mixing may only make a relatively small contribution to the C and N variations observed. 61 refs.« less

Modelling Multi Hazard Mapping in Semarang City Using GIS-Fuzzy Method

NASA Astrophysics Data System (ADS)

Nugraha, A. L.; Awaluddin, M.; Sasmito, B.

2018-02-01

One important aspect of disaster mitigation planning is hazard mapping. Hazard mapping can provide spatial information on the distribution of locations that are threatened by disaster. Semarang City as the capital of Central Java Province is one of the cities with high natural disaster intensity. Frequent natural disasters Semarang city is tidal flood, floods, landslides, and droughts. Therefore, Semarang City needs spatial information by doing multi hazard mapping to support disaster mitigation planning in Semarang City. Multi Hazards map modelling can be derived from parameters such as slope maps, rainfall, land use, and soil types. This modelling is done by using GIS method with scoring and overlay technique. However, the accuracy of modelling would be better if the GIS method is combined with Fuzzy Logic techniques to provide a good classification in determining disaster threats. The Fuzzy-GIS method will build a multi hazards map of Semarang city can deliver results with good accuracy and with appropriate threat class spread so as to provide disaster information for disaster mitigation planning of Semarang city. from the multi-hazard modelling using GIS-Fuzzy can be known type of membership that has a good accuracy is the type of membership Gauss with RMSE of 0.404 the smallest of the other membership and VAF value of 72.909% of the largest of the other membership.

Treatment of non-Hodgkin's lymphoma xenografts with the HB22.7 anti-CD22 monoclonal antibody and phosphatase inhibitors improves efficacy.

PubMed

O'Donnell, Robert T; Pearson, David; McKnight, Hayes C; Ma, Ya Peng; Tuscano, Joseph M

2009-10-01

To examine the role of phosphatase inhibition on anti-CD22, HB22.7-mediated lymphomacidal effects. CD22 is a cell-surface molecule expressed on most B cell lymphomas (NHL). HB22.7 is an anti-CD22 monoclonal antibody that binds a unique CD22-epitope, blocks ligand binding, initiates signaling, and has demonstrated lymphomacidal activity. The SHP-1 tyrosine phosphatase is associated with the cytoplasmic domain of CD22. Sodium orthovanadate (NaV) is a phosphatase inhibitor. The SHP-1-CD22 interaction presents an opportunity to manipulate CD22-mediated signaling effects. In vitro cell culture assays and in vivo human NHL xenograft studies were used to assess the effects of phosphatase inhibition. NaV caused dose dependent killing of NHL cells in vitro; when HB22.7 was given with NaV, antibody-mediated cell death was augmented. Flow cytometry showed that NaV-pretreatment resulted in less CD22 internalization after ligation with HB22.7 than did control cells. Studies in mice bearing Raji NHL xenografts showed that the combination of NaV and HB22.7 shrank NHL tumors more rapidly, had a higher complete response rate (80%), and produced the best survival compared to controls; no toxicity was detected. Studies using Raji cells stably transfected with SHP-1DN confirmed that these observations were due to SHP-1 inhibition. The relatively specific association of SHP-1 with CD22 suggests that CD22-specific signal augmentation by phosphatase inhibitors can improve the clinical outcome of anti-CD22 based immunotherapy.

Statistics of City School Systems, 1921-22. Bulletin, 1924, No. 34

ERIC Educational Resources Information Center

Bureau of Education, Department of the Interior, 1925

1925-01-01

This report presents the statistics of public schools in cities for the school year 1921-1922. The bureau has followed the classification based upon population as reported by the Bureau of the Census in 1920. Group I includes all cities having a population of 100,000 or more; Group II includes cities having a population of 30,000 or more, but…

3D modeling based on CityEngine

NASA Astrophysics Data System (ADS)

Jia, Guangyin; Liao, Kaiju

2017-03-01

Currently, there are many 3D modeling softwares, like 3DMAX, AUTOCAD, and more populous BIM softwares represented by REVIT. CityEngine modeling software introduced in this paper can fully utilize the existing GIS data and combine other built models to make 3D modeling on internal and external part of buildings in a rapid and batch manner, so as to improve the 3D modeling efficiency.

Potential of 3D City Models to assess flood vulnerability

NASA Astrophysics Data System (ADS)

Schröter, Kai; Bochow, Mathias; Schüttig, Martin; Nagel, Claus; Ross, Lutz; Kreibich, Heidi

2016-04-01

Vulnerability, as the product of exposure and susceptibility, is a key factor of the flood risk equation. Furthermore, the estimation of flood loss is very sensitive to the choice of the vulnerability model. Still, in contrast to elaborate hazard simulations, vulnerability is often considered in a simplified manner concerning the spatial resolution and geo-location of exposed objects as well as the susceptibility of these objects at risk. Usually, area specific potential flood loss is quantified on the level of aggregated land-use classes, and both hazard intensity and resistance characteristics of affected objects are represented in highly simplified terms. We investigate the potential of 3D City Models and spatial features derived from remote sensing data to improve the differentiation of vulnerability in flood risk assessment. 3D City Models are based on CityGML, an application scheme of the Geography Markup Language (GML), which represents the 3D geometry, 3D topology, semantics and appearance of objects on different levels of detail. As such, 3D City Models offer detailed spatial information which is useful to describe the exposure and to characterize the susceptibility of residential buildings at risk. This information is further consolidated with spatial features of the building stock derived from remote sensing data. Using this database a spatially detailed flood vulnerability model is developed by means of data-mining. Empirical flood damage data are used to derive and to validate flood susceptibility models for individual objects. We present first results from a prototype application in the city of Dresden, Germany. The vulnerability modeling based on 3D City Models and remote sensing data is compared i) to the generally accepted good engineering practice based on area specific loss potential and ii) to a highly detailed representation of flood vulnerability based on a building typology using urban structure types. Comparisons are drawn in terms of

Stochastic oscillations in models of epidemics on a network of cities

NASA Astrophysics Data System (ADS)

Rozhnova, G.; Nunes, A.; McKane, A. J.

2011-11-01

We carry out an analytic investigation of stochastic oscillations in a susceptible-infected-recovered model of disease spread on a network of n cities. In the model a fraction fjk of individuals from city k commute to city j, where they may infect, or be infected by, others. Starting from a continuous-time Markov description of the model the deterministic equations, which are valid in the limit when the population of each city is infinite, are recovered. The stochastic fluctuations about the fixed point of these equations are derived by use of the van Kampen system-size expansion. The fixed point structure of the deterministic equations is remarkably simple: A unique nontrivial fixed point always exists and has the feature that the fraction of susceptible, infected, and recovered individuals is the same for each city irrespective of its size. We find that the stochastic fluctuations have an analogously simple dynamics: All oscillations have a single frequency, equal to that found in the one-city case. We interpret this phenomenon in terms of the properties of the spectrum of the matrix of the linear approximation of the deterministic equations at the fixed point.

Sodium-22 In Supernovae

NASA Astrophysics Data System (ADS)

Amari, Sachiko

2008-05-01

There are several isotopically distinct noble gas components in meteorites. Of them, Ne-E(L), heavily enriched in 22Ne, is carried by graphite with a range of density (1.6 - 2.2 g/cm3). Bulk (=aggregates) noble gas analysis of graphite separates from the Murchison meteorite indicate that a dominant source of 22Ne is 22Na (T1/2 = 2.6 a) with varying proportions of 22Ne via 14N(α,γ)18F(e+ν)18O(α,γ)22Ne with density. Low-density graphite grains, from their isotopic signatures, are believed to have formed in supernovae. Examinations of both bulk and single-grain analyses of low-density graphite grains (Amari et al., 1995; Nichols et al., 1994) indicate that all 22Ne in low-density graphite grains is from the decay of 22Na that was produced in the O/Ne zone in supernovae. One may argue why implanted 20,22Ne was not observed in the grains, considering the fact that the mass fraction of 20Ne is 5 orders of magnitude larger than that of 22Na. Croat et al. (2003) observed TiC subgrains inside low-density graphite grains have amorphous rims with the thickness of 3 to 15 nm, indicating atom bombardment from the surrounding gas. Assuming the gas is He, they estimated the velocity is 50 km/s or less. If the relative velocities between the Ne and the graphite grains are in that range, the penetration depth into the graphite grains is 2nm. Such shallow surface layers would be sputtered once the grains hit the reverse shock and keep traveling into the hot H-rich region (Nozawa et al, 2007). It remains to be seen whether or not 22Na in higher-density graphite is from supernovae or novae, or both. Amari, S. et al. 1995, Geochim. Cosmochim. Acta, 59, 1411 Croat, T.K. et al. 2003, Geochim. Cosmochim. Acta, 67, 4705 Nichols R.H. et al. 1994, Meteoritics, 29, 510 Nozawa, T. et al. 2007 ApJ, 666, 955

Model of urban water management towards water sensitive city: a literature review

NASA Astrophysics Data System (ADS)

Maftuhah, D. I.; Anityasari, M.; Sholihah, M.

2018-04-01

Nowadays, many cities are facing with complex issues such as climate change, social, economic, culture, and environmental problems, especially urban water. In other words, the city has to struggle with the challenge to make sure its sustainability in all aspects. This research focuses on how to ensure the city sustainability and resilience on urban water management. Many research were not only conducted in urban water management, but also in sustainability itself. Moreover, water sustainability shifts from urban water management into water sensitive city. This transition needs comprehensive aspects such as social, institutional dynamics, technical innovation, and local contents. Some literatures about model of urban water management and the transition towards water sensitivity had been reviewed in this study. This study proposed discussion about model of urban water management and the transition towards water sensitive city. Research findings suggest that there are many different models developed in urban water management, but they are not comprehensive yet and only few studies discuss about the transition towards water sensitive and resilience city. The drawbacks of previous research can identify and fulfill the gap of this study. Therefore, the paper contributes a general framework for the urban water management modelling studies.

F-22 Increment 3.2B Modernization (F-22 Inc 3.2B Mod)

DTIC Science & Technology

2015-12-01

Production Jan 2018 Jan 2018 Jul 2018 Jul 2018 Required Assets Available ( RAA ) Mar 2019 Mar 2019 Sep 2019 Sep 2019 Change Explanations None Notes... RAA is defined as six aircraft and associated support equipment. F-22 Inc 3.2B Mod December 2015 SAR March 23, 2016 16:11:54 UNCLASSIFIED 9...Mar 2016 N/A Jun 2016 RAA N/A Mar 2019 N/A Sep 2019 Total Cost (TY $M) N/A 1584.1 N/A 1542.6 Total Quantity N/A 152 N/A 152 PAUC N/A 10.422 N/A 10.149

Urban Growth Modeling Using Anfis Algorithm: a Case Study for Sanandaj City, Iran

NASA Astrophysics Data System (ADS)

Mohammady, S.; Delavar, M. R.; Pijanowski, B. C.

2013-10-01

Global urban population has increased from 22.9% in 1985 to 47% in 2010. In spite of the tendency for urbanization worldwide, only about 2% of Earth's land surface is covered by cities. Urban population in Iran is increasing due to social and economic development. The proportion of the population living in Iran urban areas has consistently increased from about 31% in 1956 to 68.4% in 2006. Migration of the rural population to cities and population growth in cities have caused many problems, such as irregular growth of cities, improper placement of infrastructure and urban services. Air and environmental pollution, resource degradation and insufficient infrastructure, are the results of poor urban planning that have negative impact on the environment or livelihoods of people living in cities. These issues are a consequence of improper land use planning. Models have been employed to assist in our understanding of relations between land use and its subsequent effects. Different models for urban growth modeling have been developed. Methods from computational intelligence have made great contributions in all specific application domains and hybrid algorithms research as a part of them has become a big trend in computational intelligence. Artificial Neural Network (ANN) has the capability to deal with imprecise data by training, while fuzzy logic can deal with the uncertainty of human cognition. ANN learns from scratch by adjusting the interconnections between layers and Fuzzy Inference Systems (FIS) is a popular computing framework based on the concept of fuzzy set theory, fuzzy logic, and fuzzy reasoning. Fuzzy logic has many advantages such as flexibility and at the other sides, one of the biggest problems in fuzzy logic application is the location and shape and of membership function for each fuzzy variable which is generally being solved by trial and error method. In contrast, numerical computation and learning are the advantages of neural network, however, it is

["Healthy cities"--requirements and performance. Questionnaire results and a suggestion on quality monitoring (healthy-cities-barometer)].

PubMed

Plümer, K D; Trojan, A

2004-03-01

The overall goal of the WHO Healthy Cities Project was to translate some key points of the Ottawa Charter for Health Promotion (1986) into reality such as public health policies, creating health-promoting environments, strengthening community action through active public participation (empowerment of communities) and equity in health at the local level. These should be anchored within the local political administrative system (PAS), which means health should be on the agenda of policymakers in all sectors. To figure out how far this has been attained after almost 15 years of "healthy cities" policy in Germany was the focal point of the first questioning of local project coordinators. A written questionnaire containing 128 items has been developed in collaboration with the Healthy Cities Network-Coordinator. The questionnaire consists of 78 standardised questions and some (23) open-ended questions for more specific qualitative information. Also included are 27 ten-point rating scales to evaluate the coordinators' view of some aspects of their healthy cities work and to assess its progress. Based on 30 questions of the questionnaire we generated six quality indices, summarised to a quality index for a monitoring model. 47 (90 %) project-coordinators from a list of 52 took part in the first German Healthy Cities survey in the spring 2002. Selected results of the network questioning concerning the local "healthy cities" offices, work priorities and methods demonstrate differences between East and West Germany and general weakpoints of the "healthy cities" projects. Data analysis based on six quality dimensions of the "Healthy Cities" work, Programme Equipment and Commitment (Structure), Concept Quality and Integration within the Network (Process), Self-reported Success and Integration within the City/Municipality (Outcome), revealed some weak points of the " Healthy Cities" work as follows: Basing on the six quality dimensions we present a monitoring model (Healthy-Cities

Automatic generation and simulation of urban building energy models based on city datasets for city-scale building retrofit analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yixing; Hong, Tianzhen; Piette, Mary Ann

Buildings in cities consume 30–70% of total primary energy, and improving building energy efficiency is one of the key strategies towards sustainable urbanization. Urban building energy models (UBEM) can support city managers to evaluate and prioritize energy conservation measures (ECMs) for investment and the design of incentive and rebate programs. This paper presents the retrofit analysis feature of City Building Energy Saver (CityBES) to automatically generate and simulate UBEM using EnergyPlus based on cities’ building datasets and user-selected ECMs. CityBES is a new open web-based tool to support city-scale building energy efficiency strategic plans and programs. The technical details ofmore » using CityBES for UBEM generation and simulation are introduced, including the workflow, key assumptions, and major databases. Also presented is a case study that analyzes the potential retrofit energy use and energy cost savings of five individual ECMs and two measure packages for 940 office and retail buildings in six city districts in northeast San Francisco, United States. The results show that: (1) all five measures together can save 23–38% of site energy per building; (2) replacing lighting with light-emitting diode lamps and adding air economizers to existing heating, ventilation and air-conditioning (HVAC) systems are most cost-effective with an average payback of 2.0 and 4.3 years, respectively; and (3) it is not economical to upgrade HVAC systems or replace windows in San Francisco due to the city's mild climate and minimal cooling and heating loads. Furthermore, the CityBES retrofit analysis feature does not require users to have deep knowledge of building systems or technologies for the generation and simulation of building energy models, which helps overcome major technical barriers for city managers and their consultants to adopt UBEM.« less

Automatic generation and simulation of urban building energy models based on city datasets for city-scale building retrofit analysis

DOE PAGES

Chen, Yixing; Hong, Tianzhen; Piette, Mary Ann

2017-08-07

Buildings in cities consume 30–70% of total primary energy, and improving building energy efficiency is one of the key strategies towards sustainable urbanization. Urban building energy models (UBEM) can support city managers to evaluate and prioritize energy conservation measures (ECMs) for investment and the design of incentive and rebate programs. This paper presents the retrofit analysis feature of City Building Energy Saver (CityBES) to automatically generate and simulate UBEM using EnergyPlus based on cities’ building datasets and user-selected ECMs. CityBES is a new open web-based tool to support city-scale building energy efficiency strategic plans and programs. The technical details ofmore » using CityBES for UBEM generation and simulation are introduced, including the workflow, key assumptions, and major databases. Also presented is a case study that analyzes the potential retrofit energy use and energy cost savings of five individual ECMs and two measure packages for 940 office and retail buildings in six city districts in northeast San Francisco, United States. The results show that: (1) all five measures together can save 23–38% of site energy per building; (2) replacing lighting with light-emitting diode lamps and adding air economizers to existing heating, ventilation and air-conditioning (HVAC) systems are most cost-effective with an average payback of 2.0 and 4.3 years, respectively; and (3) it is not economical to upgrade HVAC systems or replace windows in San Francisco due to the city's mild climate and minimal cooling and heating loads. Furthermore, the CityBES retrofit analysis feature does not require users to have deep knowledge of building systems or technologies for the generation and simulation of building energy models, which helps overcome major technical barriers for city managers and their consultants to adopt UBEM.« less

Direct measurement of nuclear cross sections of astrophysical relevance at LUNA: The 22Ne(p, γ) 23Na reaction

NASA Astrophysics Data System (ADS)

Ferraro, F.; LUNA Collaboration

2017-01-01

Most of the elements constituting the universe were produced in stars through a series of nuclear reactions. LUNA performs direct measurements of nuclear cross sections relevant to astrophysics, taking advantage of the low background at LNGS. The ^{22}Ne(p,γ)^{23}Na reaction rate, which belongs to the NeNa cycle of hydrogen burning, has been recently studied. Its rate is still very uncertain because of a lot of resonances lying inside the Gamow window. LUNA discovered three new resonances using two high-purity germanium detectors and considerably improved the existing upper limits on the lower energy resonances using a high-efficiency optically-segmented BGO crystal.

Thermodynamic modeling of hydrogen storage capacity in Mg-Na alloys.

PubMed

Abdessameud, S; Mezbahul-Islam, M; Medraj, M

2014-01-01

Thermodynamic modeling of the H-Mg-Na system is performed for the first time in this work in order to understand the phase relationships in this system. A new thermodynamic description of the stable NaMgH3 hydride is performed and the thermodynamic models for the H-Mg, Mg-Na, and H-Na systems are reassessed using the modified quasichemical model for the liquid phase. The thermodynamic properties of the ternary system are estimated from the models of the binary systems and the ternary compound using CALPHAD technique. The constructed database is successfully used to reproduce the pressure-composition isotherms for MgH2 + 10 wt.% NaH mixtures. Also, the pressure-temperature equilibrium diagram and reaction paths for the same composition are predicted at different temperatures and pressures. Even though it is proved that H-Mg-Na does not meet the DOE hydrogen storage requirements for onboard applications, the best working temperatures and pressures to benefit from its full catalytic role are given. Also, the present database can be used for thermodynamic assessments of higher order systems.

RCA: A route city attraction model for air passengers

NASA Astrophysics Data System (ADS)

Huang, Feihu; Xiong, Xi; Peng, Jian; Guo, Bing; Tong, Bo

2018-02-01

Human movement pattern is a research hotspot of social computing and has practical values in various fields, such as traffic planning. Previous studies mainly focus on the travel activities of human beings on the ground rather than those in the air. In this paper, we use the reservation records of air passengers to explore air passengers' movement characteristics. After analyzing the effect of the route-trip length on the throughput, we find that most passengers eventually return to their original departure city and that the mobility of air passengers is not related to the route length. Based on these characteristics, we present a route city attraction (RCA) model, in which GDP or population is considered for the calculation of the attraction. The sub models of our RCA model show the better prediction performance of throughput than the radiation model and the gravity model.

24Na at Ex=4.7 -5.9 MeV from 22Ne(3He,p )

NASA Astrophysics Data System (ADS)

Fortune, H. T.

2018-04-01

Abstract. Analysis of data from the 22Ne(3He,p ) 24Na reaction has been extended to include 18 angular distributions for states between 4.7 and 5.9 MeV. A distorted-wave Born-approximation analysis allows the determination of ℓ value(s) for most of them. Results for Jπ are compared with previous information. In general, agreement is good. Some apparent disagreements between current and past results are indicative of population of a different state in this reaction than the nearby one listed in the compilation.

Thermodynamic Modeling of Hydrogen Storage Capacity in Mg-Na Alloys

PubMed Central

Abdessameud, S.; Mezbahul-Islam, M.; Medraj, M.

2014-01-01

Thermodynamic modeling of the H-Mg-Na system is performed for the first time in this work in order to understand the phase relationships in this system. A new thermodynamic description of the stable NaMgH3 hydride is performed and the thermodynamic models for the H-Mg, Mg-Na, and H-Na systems are reassessed using the modified quasichemical model for the liquid phase. The thermodynamic properties of the ternary system are estimated from the models of the binary systems and the ternary compound using CALPHAD technique. The constructed database is successfully used to reproduce the pressure-composition isotherms for MgH2 + 10 wt.% NaH mixtures. Also, the pressure-temperature equilibrium diagram and reaction paths for the same composition are predicted at different temperatures and pressures. Even though it is proved that H-Mg-Na does not meet the DOE hydrogen storage requirements for onboard applications, the best working temperatures and pressures to benefit from its full catalytic role are given. Also, the present database can be used for thermodynamic assessments of higher order systems. PMID:25383361

A geographic information system-based 3D city estate modeling and simulation system

NASA Astrophysics Data System (ADS)

Chong, Xiaoli; Li, Sha

2015-12-01

This paper introduces a 3D city simulation system which is based on geographic information system (GIS), covering all commercial housings of the city. A regional- scale, GIS-based approach is used to capture, describe, and track the geographical attributes of each house in the city. A sorting algorithm of "Benchmark + Parity Rate" is developed to cluster houses with similar spatial and construction attributes. This system is applicable for digital city modeling, city planning, housing evaluation, housing monitoring, and visualizing housing transaction. Finally, taking Jingtian area of Shenzhen as an example, the each unit of 35,997 houses in the area could be displayed, tagged, and easily tracked by the GIS-based city modeling and simulation system. The match market real conditions well and can be provided to house buyers as reference.

Human CD22 Inhibits Murine B Cell Receptor Activation in a Human CD22 Transgenic Mouse Model.

PubMed

Bednar, Kyle J; Shanina, Elena; Ballet, Romain; Connors, Edward P; Duan, Shiteng; Juan, Joana; Arlian, Britni M; Kulis, Michael D; Butcher, Eugene C; Fung-Leung, Wai-Ping; Rao, Tadimeti S; Paulson, James C; Macauley, Matthew S

2017-11-01

CD22, a sialic acid-binding Ig-type lectin (Siglec) family member, is an inhibitory coreceptor of the BCR with established roles in health and disease. The restricted expression pattern of CD22 on B cells and most B cell lymphomas has made CD22 a therapeutic target for B cell-mediated diseases. Models to better understand how in vivo targeting of CD22 translates to human disease are needed. In this article, we report the development of a transgenic mouse expressing human CD22 (hCD22) in B cells and assess its ability to functionally substitute for murine CD22 (mCD22) for regulation of BCR signaling, Ab responses, homing, and tolerance. Expression of hCD22 on transgenic murine B cells is comparable to expression on human primary B cells, and it colocalizes with mCD22 on the cell surface. Murine B cells expressing only hCD22 have identical calcium (Ca 2+ ) flux responses to anti-IgM as mCD22-expressing wild-type B cells. Furthermore, hCD22 transgenic mice on an mCD22 -/- background have restored levels of marginal zone B cells and Ab responses compared with deficiencies observed in CD22 -/- mice. Consistent with these observations, hCD22 transgenic mice develop normal humoral responses in a peanut allergy oral sensitization model. Homing of B cells to Peyer's patches was partially rescued by expression of hCD22 compared with CD22 -/- B cells, although not to wild-type levels. Notably, Siglec-engaging antigenic liposomes formulated with an hCD22 ligand were shown to prevent B cell activation, increase cell death, and induce tolerance in vivo. This hCD22 transgenic mouse will be a valuable model for investigating the function of hCD22 and preclinical studies targeting hCD22. Copyright © 2017 by The American Association of Immunologists, Inc.

Thermodynamic Model of the Na-Al-Si-O-F Melts

NASA Astrophysics Data System (ADS)

Dolejs, D.; Baker, D. R.

2004-05-01

Fluorine is a common volatile element in magmatic-hydrothermal systems, but its solution mechanisms in highly polymerized silicate melts are poorly known. We have developed a thermodynamic model for fluorosilicate liquids which links experimentally determined phase equilibria and spectroscopic information on melt structure. The model is applicable to crystallization of fluoride minerals or fluoride-silicate immiscibility in natural felsic melts. Configurational properties of the liquid are defined by mixing of alkali fluoride, polyhedral aluminofluoride and silicofluoride species and non-bridging terminations of the silicate network. Abundances of individual structural species are described by a homogeneous equilibrium, representing melt depolymerization: F- (free) + O0 (bridging) = F0 (terminal) + O- (non-bridging), which is a replacement of one oxygen bridge, Si-O-Si, by two terminations, Si-F | Na-O-Si. In cryolite-bearing systems, the self-dissociation of octahedral aluminofluoride complexes: Na3[AlF6] = Na[AlF4] + 2 NaF, and the short-range order between (O,F)-corners and (Si,NaAl)-centers of tetrahedra: Si-O-Si + 2 [NaAl]-F = [NaAl]-O-[NaAl] + 2 Si-F, represent two additional interaction mechanisms. Portrayal of these equilibria in ternary Thompson reaction space allows to decrease the number of interaction mechanisms by linearly combining melt depolymerization with tetrahedral short-range order. In this formulation, the interaction parameters are incorporated directly in configurational properties, thus the complete melt speciation can be calculated, and the activities of any macroscopic species are readily derived. The model has been applied to subsystems of the Na2O-NaAlO2-SiO2-F2O-1 compositional space. Activity-composition relationships in the villiaumite-sodium silicate binaries require clustering of silicate tetrahedra in fluoride solvent. Phase-equilibria in cryolite-nepheline and cryolite-albite systems illustrate an overall increase of Na3AlF6 self

Heritage House Maintenance Using 3d City Model Application Domain Extension Approach

NASA Astrophysics Data System (ADS)

Mohd, Z. H.; Ujang, U.; Liat Choon, T.

2017-11-01

Heritage house is part of the architectural heritage of Malaysia that highly valued. Many efforts by the Department of Heritage to preserve this heritage house such as monitoring the damage problems of heritage house. The damage problems of heritage house might be caused by wooden decay, roof leakage and exfoliation of wall. One of the initiatives for maintaining and documenting this heritage house is through Three-dimensional (3D) of technology. 3D city models are widely used now and much used by researchers for management and analysis. CityGML is a standard tool that usually used by researchers to exchange, storing and managing virtual 3D city models either geometric and semantic information. Moreover, it also represent multi-scale of 3D model in five level of details (LoDs) whereby each of level give a distinctive functions. The extension of CityGML was recently introduced and can be used for problems monitoring and the number of habitants of a house.

The Effect of Finasteride and Dutasteride on the Growth of WPE1-NA22 Prostate Cancer Xenografts in Nude Mice

PubMed Central

Opoku-Acheampong, Alexander B.; Nelsen, Michelle K.; Unis, Dave; Lindshield, Brian L.

2012-01-01

Background 5α-reductase 1 (5αR1) and 5α-reductase 2 (5αR2) convert testosterone into the more potent androgen dihydrotestosterone. 5αR2 is the main isoenzyme in normal prostate tissue; however, most prostate tumors have increased 5αR1 and decreased 5αR2 expression. Previously, finasteride (5αR2 inhibitor) treatment begun 3 weeks post-tumor implantation had no effect on Dunning R3327-H rat prostate tumor growth. We believe the tumor compensated for finasteride treatment by increasing tumor 5αR1 expression or activity. We hypothesize that finasteride treatment would not significantly alter tumor growth even if begun before tumor implantation, whereas dutasteride (5αR1 and 5αR2 inhibitor) treatment would decrease tumor growth regardless of whether treatment was initiated before or after tumor implantation. Methodology/Principal Findings Sixty 8-week-old male nude mice were randomized to Control, Pre- and Post-Finasteride, and Pre- and Post-Dutasteride (83.3 mg drug/kg diet) diet groups. Pre- and post-groups began their treatment diets 1–2 weeks prior to or 3 weeks after subcutaneous injection of 1×105 WPE1-NA22 human prostate cancer cells, respectively. Tumors were allowed to grow for 22 weeks; tumor areas, body weights, and food intakes were measured weekly. At study's conclusion, prostate and seminal vesicle weights were significantly decreased in all treatment groups versus the control; dutasteride intake significantly decreased seminal vesicle weights compared to finasteride intake. No differences were measured in final tumor areas or tumor weights between groups, likely due to poor tumor growth. In follow-up studies, proliferation of WPE1-NA22 prostate cancer cells and parent line RWPE-1 prostate epithelial cells were unaltered by treatment with testosterone, dihydrotestosterone, or mibolerone, suggesting that these cell lines are not androgen-sensitive. Conclusion The lack of response of WPE1-NA22 prostate cancer cells to androgen treatment may

Measurement of the strengths of the resonances at 417, 458, 611, 632 and 1222 keV in the 22Ne(p, γ)23Na reaction

NASA Astrophysics Data System (ADS)

Ferraro, Federico

2018-01-01

The 22Ne(p, γ)23Na reaction is part of the NeNa cycle of hydrogen burning. This cycle plays a key role in the nucleosynthesis of the elements between 20Ne and 27Al in red giant stars, asymptotic giant stars and classical nova explosions. The strengths of the resonances at proton energies above 400 keV are still affected by high uncertainty. In order to reduce this uncertainty, a precision study of some of the most intense resonances between 400 keV and 1250 keV has been performed at the HZDR 3 MV Tandetron. The target, made of 22Ne implanted in a 0.22 mm thick Ta backing, has been characterized using the 1222 keV and 458 keV resonances, well known in literature. Subsequently, the strengths of the resonances at 417, 458, 611, 632 and 1222 keV were determined. Two HPGe detectors equipped with active anti-Compton shielding have been used.

Forecasting the Incidence of Mumps in Zibo City Based on a SARIMA Model.

PubMed

Xu, Qinqin; Li, Runzi; Liu, Yafei; Luo, Cheng; Xu, Aiqiang; Xue, Fuzhong; Xu, Qing; Li, Xiujun

2017-08-17

This study aimed to predict the incidence of mumps using a seasonal autoregressive integrated moving average (SARIMA) model, and provide theoretical evidence for early warning prevention and control in Zibo City, Shandong Province, China. Monthly mumps data from Zibo City gathered between 2005 and 2013 were used as a training set to construct a SARIMA model, and the monthly mumps in 2014 were defined as a test set for the model. From 2005 to 2014, a total of 8722 cases of mumps were reported in Zibo City; the male-to-female ratio of cases was 1.85:1, the age group of 1-20 years old accounted for 94.05% of all reported cases, and students made up the largest proportion (65.89%). The main serious endemic areas of mumps were located in Huantai County, Linzi District, and Boshan District of Zibo City. There were two epidemic peaks from April to July and from October to January in next year. The fitted model SARIMA (0, 1, 1) (0, 1, 1) 12 was established (AIC = 157.528), which has high validity and reasonability. The SARIMA model fitted dynamic changes of mumps in Zibo City well. It can be used for short-term forecasting and early warning of mumps.

Forecasting the Incidence of Mumps in Zibo City Based on a SARIMA Model

PubMed Central

Xu, Qinqin; Li, Runzi; Liu, Yafei; Luo, Cheng; Xu, Aiqiang; Xue, Fuzhong; Xu, Qing; Li, Xiujun

2017-01-01

This study aimed to predict the incidence of mumps using a seasonal autoregressive integrated moving average (SARIMA) model, and provide theoretical evidence for early warning prevention and control in Zibo City, Shandong Province, China. Monthly mumps data from Zibo City gathered between 2005 and 2013 were used as a training set to construct a SARIMA model, and the monthly mumps in 2014 were defined as a test set for the model. From 2005 to 2014, a total of 8722 cases of mumps were reported in Zibo City; the male-to-female ratio of cases was 1.85:1, the age group of 1–20 years old accounted for 94.05% of all reported cases, and students made up the largest proportion (65.89%). The main serious endemic areas of mumps were located in Huantai County, Linzi District, and Boshan District of Zibo City. There were two epidemic peaks from April to July and from October to January in next year. The fitted model SARIMA (0, 1, 1) (0, 1, 1)12 was established (AIC = 157.528), which has high validity and reasonability. The SARIMA model fitted dynamic changes of mumps in Zibo City well. It can be used for short-term forecasting and early warning of mumps. PMID:28817101

Comparing and modelling land use organization in cities

PubMed Central

Lenormand, Maxime; Picornell, Miguel; Cantú-Ros, Oliva G.; Louail, Thomas; Herranz, Ricardo; Barthelemy, Marc; Frías-Martínez, Enrique; San Miguel, Maxi; Ramasco, José J.

2015-01-01

The advent of geolocated information and communication technologies opens the possibility of exploring how people use space in cities, bringing an important new tool for urban scientists and planners, especially for regions where data are scarce or not available. Here we apply a functional network approach to determine land use patterns from mobile phone records. The versatility of the method allows us to run a systematic comparison between Spanish cities of various sizes. The method detects four major land use types that correspond to different temporal patterns. The proportion of these types, their spatial organization and scaling show a strong similarity between all cities that breaks down at a very local scale, where land use mixing is specific to each urban area. Finally, we introduce a model inspired by Schelling's segregation, able to explain and reproduce these results with simple interaction rules between different land uses. PMID:27019730

The puzzling interpretation of NIR indices: The case of NaI2.21

NASA Astrophysics Data System (ADS)

Röck, B.; Vazdekis, A.; La Barbera, F.; Peletier, R. F.; Knapen, J. H.; Allende-Prieto, C.; Aguado, D. S.

2017-11-01

We present a detailed study of the Na I line strength index centred in the K band at 22 100 Å (NaI2.21 hereafter) relying on different samples of early-type galaxies. Consistent with previous studies, we find that the observed line strength indices cannot be fit by state-of-the-art scaled-solar stellar population models, even using our newly developed models in the near infrared (NIR). The models clearly underestimate the large NaI2.21 values measured for most early-type galaxies. However, we develop an Na-enhanced version of our newly developed models in the NIR, which - together with the effect of a bottom-heavy initial mass function - yield NaI2.21 indices in the range of the observations. Therefore, we suggest a scenario in which the combined effect of [Na/Fe] enhancement and a bottom-heavy initial mass function are mainly responsible for the large NaI2.21 indices observed for most early-type galaxies. To a smaller extent, also [C/Fe] enhancement might contribute to the large observed NaI2.21 values.

Utilizing Co 2+/Co 3+ Redox Couple in P2-Layered Na 0.66Co 0.22Mn 0.44Ti 0.34O 2 Cathode for Sodium-Ion Batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Qin-Chao; Hu, Enyuan; Pan, Yang

Developing sodium-ion batteries for large-scale energy storage applications is facing big challenges of the lack of high-performance cathode materials. Here, a series of new cathode materials Na 0.66Co xMn 0.66–xTi 0.34O 2 for sodium-ion batteries are designed and synthesized aiming to reduce transition metal-ion ordering, charge ordering, as well as Na+ and vacancy ordering. An interesting structure change of Na 0.66Co xMn 0.66–xTi 0.34O 2 from orthorhombic to hexagonal is revealed when Co content increases from x = 0 to 0.33. In particular, Na 0.66Co 0.22Mn 0.44Ti 0.34O 2 with a P2-type layered structure delivers a reversible capacity of 120more » mAh g -1 at 0.1 C. When the current density increases to 10 C, a reversible capacity of 63.2 mAh g -1 can still be obtained, indicating a promising rate capability. The low valence Co 2+ substitution results in the formation of average Mn 3.7+ valence state in Na 0.66Co 0.22Mn 0.44Ti 0.34O 2, effectively suppressing the Mn3+-induced Jahn–Teller distortion, and in turn stabilizing the layered structure. X-ray absorption spectroscopy results suggest that the charge compensation of Na 0.66Co 0.22Mn 0.44Ti 0.34O 2 during charge/discharge is contributed by Co 2.2+/Co 3+ and Mn 3.3+/Mn 4+ redox couples. This is the first time that the highly reversible Co 2+/Co 3+ redox couple is observed in P2-layered cathodes for sodium-ion batteries. This finding may open new approaches to design advanced intercalation-type cathode materials.« less

Utilizing Co 2+/Co 3+ Redox Couple in P2-Layered Na 0.66Co 0.22Mn 0.44Ti 0.34O 2 Cathode for Sodium-Ion Batteries

DOE PAGES

Wang, Qin-Chao; Hu, Enyuan; Pan, Yang; ...

2017-07-06

Developing sodium-ion batteries for large-scale energy storage applications is facing big challenges of the lack of high-performance cathode materials. Here, a series of new cathode materials Na 0.66Co xMn 0.66–xTi 0.34O 2 for sodium-ion batteries are designed and synthesized aiming to reduce transition metal-ion ordering, charge ordering, as well as Na+ and vacancy ordering. An interesting structure change of Na 0.66Co xMn 0.66–xTi 0.34O 2 from orthorhombic to hexagonal is revealed when Co content increases from x = 0 to 0.33. In particular, Na 0.66Co 0.22Mn 0.44Ti 0.34O 2 with a P2-type layered structure delivers a reversible capacity of 120more » mAh g -1 at 0.1 C. When the current density increases to 10 C, a reversible capacity of 63.2 mAh g -1 can still be obtained, indicating a promising rate capability. The low valence Co 2+ substitution results in the formation of average Mn 3.7+ valence state in Na 0.66Co 0.22Mn 0.44Ti 0.34O 2, effectively suppressing the Mn3+-induced Jahn–Teller distortion, and in turn stabilizing the layered structure. X-ray absorption spectroscopy results suggest that the charge compensation of Na 0.66Co 0.22Mn 0.44Ti 0.34O 2 during charge/discharge is contributed by Co 2.2+/Co 3+ and Mn 3.3+/Mn 4+ redox couples. This is the first time that the highly reversible Co 2+/Co 3+ redox couple is observed in P2-layered cathodes for sodium-ion batteries. This finding may open new approaches to design advanced intercalation-type cathode materials.« less

Utilizing Co2+/Co3+ Redox Couple in P2-Layered Na0.66Co0.22Mn0.44Ti0.34O2 Cathode for Sodium-Ion Batteries.

PubMed

Wang, Qin-Chao; Hu, Enyuan; Pan, Yang; Xiao, Na; Hong, Fan; Fu, Zheng-Wen; Wu, Xiao-Jing; Bak, Seong-Min; Yang, Xiao-Qing; Zhou, Yong-Ning

2017-11-01

Developing sodium-ion batteries for large-scale energy storage applications is facing big challenges of the lack of high-performance cathode materials. Here, a series of new cathode materials Na 0.66 Co x Mn 0.66- x Ti 0.34 O 2 for sodium-ion batteries are designed and synthesized aiming to reduce transition metal-ion ordering, charge ordering, as well as Na + and vacancy ordering. An interesting structure change of Na 0.66 Co x Mn 0.66- x Ti 0.34 O 2 from orthorhombic to hexagonal is revealed when Co content increases from x = 0 to 0.33. In particular, Na 0.66 Co 0.22 Mn 0.44 Ti 0.34 O 2 with a P2-type layered structure delivers a reversible capacity of 120 mAh g -1 at 0.1 C. When the current density increases to 10 C, a reversible capacity of 63.2 mAh g -1 can still be obtained, indicating a promising rate capability. The low valence Co 2+ substitution results in the formation of average Mn 3.7+ valence state in Na 0.66 Co 0.22 Mn 0.44 Ti 0.34 O 2 , effectively suppressing the Mn 3+ -induced Jahn-Teller distortion, and in turn stabilizing the layered structure. X-ray absorption spectroscopy results suggest that the charge compensation of Na 0.66 Co 0.22 Mn 0.44 Ti 0.34 O 2 during charge/discharge is contributed by Co 2.2+ /Co 3+ and Mn 3.3+ /Mn 4+ redox couples. This is the first time that the highly reversible Co 2+ /Co 3+ redox couple is observed in P2-layered cathodes for sodium-ion batteries. This finding may open new approaches to design advanced intercalation-type cathode materials.

Source apportionment of population representative samples of PM(2.5) in three European cities using structural equation modelling.

PubMed

Ilacqua, Vito; Hänninen, Otto; Saarela, Kristina; Katsouyanni, Klea; Künzli, Nino; Jantunen, Matti

2007-10-01

Apportionment of urban particulate matter (PM) to sources is central for air quality management and efficient reduction of the substantial public health risks associated with fine particles (PM(2.5)). Traffic is an important source combustion particles, but also a significant source of resuspended particles that chemically resemble Earth's crust and that are not affected by development of cleaner motor technologies. A substantial fraction of urban ambient PM originates from long-range transport outside the immediate urban environment including secondary particles formed from gaseous emissions of mainly sulphur, nitrogen oxides and ammonia. Most source apportionment studies are based on small number of fixed monitoring sites and capture well population exposures to regional and long-range transported particles. However, concentrations from local sources are very unevenly distributed and the results from such studies are therefore poorly representative of the actual exposures. The current study uses PM(2.5) data observed at population based random sampled residential locations in Athens, Basle and Helsinki with 17 elemental constituents, selected VOCs (xylenes, trimethylbenzenes, nonane and benzene) and light absorbance (black smoke). The major sources identified across the three cities included crustal, salt, long-range transported inorganic and traffic sources. Traffic was associated separately with source categories with crustal (especially Athens and Helsinki) and long-range transported chemical composition (all cities). Remarkably high fractions of the variability of elemental (R(2)>0.6 except for Ca in Basle 0.38) and chemical concentrations (R(2)>0.5 except benzene in Basle 0.22 and nonane in Athens 0.39) are explained by the source factors of an SEM model. The RAINS model that is currently used as the main tool in developing European air quality management policies seems to capture the local urban fraction (the city delta term) quite well, but underestimates

Replacement model of city bus: A dynamic programming approach

NASA Astrophysics Data System (ADS)

Arifin, Dadang; Yusuf, Edhi

2017-06-01

This paper aims to develop a replacement model of city bus vehicles operated in Bandung City. This study is driven from real cases encountered by the Damri Company in the efforts to improve services to the public. The replacement model propounds two policy alternatives: First, to maintain or keep the vehicles, and second is to replace them with new ones taking into account operating costs, revenue, salvage value, and acquisition cost of a new vehicle. A deterministic dynamic programming approach is used to solve the model. The optimization process was heuristically executed using empirical data of Perum Damri. The output of the model is to determine the replacement schedule and the best policy if the vehicle has passed the economic life. Based on the results, the technical life of the bus is approximately 20 years old, while the economic life is an average of 9 (nine) years. It means that after the bus is operated for 9 (nine) years, managers should consider the policy of rejuvenation.

Modelling and evaluating municipal solid waste management strategies in a mega-city: the case of Ho Chi Minh City.

PubMed

ThiKimOanh, Le; Bloemhof-Ruwaard, Jacqueline M; van Buuren, Joost Cl; van der Vorst, Jack Gaj; Rulkens, Wim H

2015-04-01

Ho Chi Minh City is a large city that will become a mega-city in the near future. The city struggles with a rapidly increasing flow of municipal solid waste and a foreseeable scarcity of land to continue landfilling, the main treatment of municipal solid waste up to now. Therefore, additional municipal solid waste treatment technologies are needed. The objective of this article is to support decision-making towards more sustainable and cost-effective municipal solid waste strategies in developing countries, in particular Vietnam. A quantitative decision support model is developed to optimise the distribution of municipal solid waste from population areas to treatment plants, the treatment technologies and their capacities for the near future given available infrastructure and cost factors. © The Author(s) 2015.

A Linear City Model with Asymmetric Consumer Distribution

PubMed Central

Azar, Ofer H.

2015-01-01

The article analyzes a linear-city model where the consumer distribution can be asymmetric, which is important because in real markets this distribution is often asymmetric. The model yields equilibrium price differences, even though the firms’ costs are equal and their locations are symmetric (at the two endpoints of the city). The equilibrium price difference is proportional to the transportation cost parameter and does not depend on the good's cost. The firms' markups are also proportional to the transportation cost. The two firms’ prices will be equal in equilibrium if and only if half of the consumers are located to the left of the city’s midpoint, even if other characteristics of the consumer distribution are highly asymmetric. An extension analyzes what happens when the firms have different costs and how the two sources of asymmetry – the consumer distribution and the cost per unit – interact together. The model can be useful as a tool for further development by other researchers interested in applying this simple yet flexible framework for the analysis of various topics. PMID:26034984

Flood hazard mapping of Palembang City by using 2D model

NASA Astrophysics Data System (ADS)

Farid, Mohammad; Marlina, Ayu; Kusuma, Muhammad Syahril Badri

2017-11-01

Palembang as the capital city of South Sumatera Province is one of the metropolitan cities in Indonesia that flooded almost every year. Flood in the city is highly related to Musi River Basin. Based on Indonesia National Agency of Disaster Management (BNPB), the level of flood hazard is high. Many natural factors caused flood in the city such as high intensity of rainfall, inadequate drainage capacity, and also backwater flow due to spring tide. Furthermore, anthropogenic factors such as population increase, land cover/use change, and garbage problem make flood problem become worse. The objective of this study is to develop flood hazard map of Palembang City by using two dimensional model. HEC-RAS 5.0 is used as modelling tool which is verified with field observation data. There are 21 sub catchments of Musi River Basin in the flood simulation. The level of flood hazard refers to Head Regulation of BNPB number 2 in 2012 regarding general guideline of disaster risk assessment. The result for 25 year return per iod of flood shows that with 112.47 km2 area of inundation, 14 sub catchments are categorized in high hazard level. It is expected that the hazard map can be used for risk assessment.

Development of urban water consumption models for the City of Los Angeles

NASA Astrophysics Data System (ADS)

Mini, C.; Hogue, T. S.; Pincetl, S.

2011-12-01

Population growth and rapid urbanization coupled with uncertain climate change are causing new challenges for meeting urban water needs. In arid and semi-arid regions, increasing drought periods and decreasing precipitation have led to water supply shortages and cities are struggling with trade-offs between the water needs of growing urban populations and the well-being of urban ecosystems. The goal of the current research is to build models that can represent urban water use patterns in semi-arid cities by identifying the determinants that control both total and outdoor residential water use over the Los Angeles urban domain. The initial database contains monthly water use records aggregated to the zip code level collected from the Los Angeles Department of Water and Power (LADWP) from 2000 to 2010. Residential water use was normalized per capita and was correlated with socio-demographic, economic, climatic and vegetation characteristics across the City for the 2000-2010 period. Results show that ethnicity, per capita income, and the average number of persons per household are linearly related to total water use per capita. Inter-annual differences in precipitation and implementation of conservation measures affect water use levels across the City. The high variability in water use patterns across the City also appears strongly influenced by income and education levels. The temporal analysis of vegetation indices in the studied neighborhoods shows little correlation between precipitation patterns and vegetation greenness. Urban vegetation appears well-watered, presenting the same greenness activity over the study period despite an overall decrease in water use across the City. We hypothesize that over-watering is occurring and that outdoor water use represents a significant part of the residential water budget in various regions of the City. A multiple regression model has been developed that integrates these fundamental controlling factors to simulate residential

Phosphatase inhibition augments anti-CD22-mediated signaling and cytotoxicity in non-hodgkin's lymphoma cells.

PubMed

O'Donnell, Robert T; Pearson, David; McKnight, Hayes C; Ma, Ya Peng; Tuscano, Joseph M

2009-07-01

CD22 is a cell-surface molecule found on most B-cell lymphomas (NHL). HB22.7 is an anti-CD22 antibody that blocks CD22 ligand binding, initiates signaling, and kills NHL cells. The SHP-1 tyrosine phosphatase is disproportionately associated with the cytoplasmic domain of CD22. Sodium orthovanadate (NaV) and dephostatin (DP) are phosphatase inhibitors. The interaction of SHP-1 with CD22 presents an opportunity to manipulate CD22-mediated signaling effects. NaV caused dose dependent killing of NHL cells in vitro; when HB22.7 was given with NaV, antibody-mediated cell death increased. NaV caused a substantial increase in CD22-mediated SAPK and ERK-1/2 activation when CD22 was crosslinked by HB22.7; NaV did not significantly affect IgM-mediated signals. Studies using Raji NHL cells stably transfected with a SHP-1 dominant negative (DN) confirmed that these observations were due to SHP-1 inhibition. The relatively specific association of SHP-1 with CD22 suggests that CD22-specific signaling may be altered by phosphatase inhibition in ways that could prove useful for anti-CD22-based immunotherapy.

Automatic Texture Reconstruction of 3d City Model from Oblique Images

NASA Astrophysics Data System (ADS)

Kang, Junhua; Deng, Fei; Li, Xinwei; Wan, Fang

2016-06-01

In recent years, the photorealistic 3D city models are increasingly important in various geospatial applications related to virtual city tourism, 3D GIS, urban planning, real-estate management. Besides the acquisition of high-precision 3D geometric data, texture reconstruction is also a crucial step for generating high-quality and visually realistic 3D models. However, most of the texture reconstruction approaches are probably leading to texture fragmentation and memory inefficiency. In this paper, we introduce an automatic framework of texture reconstruction to generate textures from oblique images for photorealistic visualization. Our approach include three major steps as follows: mesh parameterization, texture atlas generation and texture blending. Firstly, mesh parameterization procedure referring to mesh segmentation and mesh unfolding is performed to reduce geometric distortion in the process of mapping 2D texture to 3D model. Secondly, in the texture atlas generation step, the texture of each segmented region in texture domain is reconstructed from all visible images with exterior orientation and interior orientation parameters. Thirdly, to avoid color discontinuities at boundaries between texture regions, the final texture map is generated by blending texture maps from several corresponding images. We evaluated our texture reconstruction framework on a dataset of a city. The resulting mesh model can get textured by created texture without resampling. Experiment results show that our method can effectively mitigate the occurrence of texture fragmentation. It is demonstrated that the proposed framework is effective and useful for automatic texture reconstruction of 3D city model.

(Br-SCMM) Brazilian Smart City Maturity Model: A Perspective from the Health Domain.

PubMed

Afonso, Ricardo Alexandre; dos Santos Brito, Kellyton; Holanda do Nascimento, Clóvis; Campos da Costa, Luciana; Álvaro, Alexandre; Cardoso Garcia, Vinicius

2015-01-01

The term definition "Smart City" still allows various interpretations, and this causes some difficulty in establishing parameters to measure how smart the cities can be. This paper presents a Maturity Model that uses a set of minimum domains and indicators that aim to encourage cities of different sizes to identify their potential and improve processes and public policies.

City of Waukee, Iowa

EPA Pesticide Factsheets

The EPA is providing notice of a proposed Administrative Penalty Assessment against City of Waukee, Iowa, for alleged violations at the Westown Parkway and R22 Intersection Improvement Project construction site in Waukee, Iowa 50263.

Influence of Gsd for 3d City Modeling and Visualization from Aerial Imagery

NASA Astrophysics Data System (ADS)

Alrajhi, Muhamad; Alam, Zafare; Afroz Khan, Mohammad; Alobeid, Abdalla

2016-06-01

Ministry of Municipal and Rural Affairs (MOMRA), aims to establish solid infrastructure required for 3D city modelling, for decision making to set a mark in urban development. MOMRA is responsible for the large scale mapping 1:1,000; 1:2,500; 1:10,000 and 1:20,000 scales for 10cm, 20cm and 40 GSD with Aerial Triangulation data. As 3D city models are increasingly used for the presentation exploration, and evaluation of urban and architectural designs. Visualization capabilities and animations support of upcoming 3D geo-information technologies empower architects, urban planners, and authorities to visualize and analyze urban and architectural designs in the context of the existing situation. To make use of this possibility, first of all 3D city model has to be created for which MOMRA uses the Aerial Triangulation data and aerial imagery. The main concise for 3D city modelling in the Kingdom of Saudi Arabia exists due to uneven surface and undulations. Thus real time 3D visualization and interactive exploration support planning processes by providing multiple stakeholders such as decision maker, architects, urban planners, authorities, citizens or investors with a three - dimensional model. Apart from advanced visualization, these 3D city models can be helpful for dealing with natural hazards and provide various possibilities to deal with exotic conditions by better and advanced viewing technological infrastructure. Riyadh on one side is 5700m above sea level and on the other hand Abha city is 2300m, this uneven terrain represents a drastic change of surface in the Kingdom, for which 3D city models provide valuable solutions with all possible opportunities. In this research paper: influence of different GSD (Ground Sample Distance) aerial imagery with Aerial Triangulation is used for 3D visualization in different region of the Kingdom, to check which scale is more sophisticated for obtaining better results and is cost manageable, with GSD (7.5cm, 10cm, 20cm and 40cm

Search for Correlated Fluctuations in the Beta+ Decay of Na-22

NASA Astrophysics Data System (ADS)

Silverman, M. P.; Strange, W.

2008-10-01

Claims for a ``cosmogenic'' force that correlates otherwise independent stochastic events have been made for at least 10 years, based largely on visual inspection of time series of histograms whose shapes were interpreted as suggestive of recurrent patterns with semi-diurnal, diurnal, and monthly periods. Building on our earlier work to test randomness of different nuclear decay processes, we have searched for correlations in the time-series of coincident positron-electron annihilations deriving from beta+ decay of Na-22. Disintegrations were counted within a narrow time window over a period of 7 days, leading to a time series of more than 1 million events. Statistical tests were performed on the raw time series, its correlation function, and its Fourier transform to search for cyclic correlations indicative of quantum-mechanical violating deviations from Poisson statistics. The time series was then partitioned into a sequence of 167 ``bags'' each of 8192 events. A histogram was made of the events of each bag, where contiguous frequency classes differed by a single count. The chronological sequence of histograms was then tested for correlations within classes. In all cases the results of the tests were in accord with statistical control, giving no evidence of correlated fluctuations.

High-Resolution Urban Greenery Mapping for Micro-Climate Modelling Based on 3d City Models

NASA Astrophysics Data System (ADS)

Hofierka, J.; Gallay, M.; Kaňuk, J.; Šupinský, J.; Šašak, J.

2017-10-01

Urban greenery has various positive micro-climate effects including mitigation of heat islands. The primary root of heat islands in cities is in absorption of solar radiation by the mass of building structures, roads and other solid materials. The absorbed heat is subsequently re-radiated into the surroundings and increases ambient temperatures. The vegetation can stop and absorb most of incoming solar radiation mostly via the photosynthesis and evapotranspiration process. However, vegetation in mild climate of Europe manifests considerable annual seasonality which can also contribute to the seasonal change in the cooling effect of the vegetation on the urban climate. Modern methods of high-resolution mapping and new generations of sensors have brought opportunity to record the dynamics of urban greenery in a high resolution in spatial, spectral, and temporal domains. In this paper, we use the case study of the city of Košice in Eastern Slovakia to demonstrate the methodology of 3D mapping and modelling the urban greenery during one vegetation season in 2016. The purpose of this monitoring is to capture 3D effects of urban greenery on spatial distribution of solar radiation in urban environment. Terrestrial laser scanning was conducted on four selected sites within Košice in ultra-high spatial resolution. The entire study area, which included these four smaller sites, comprised 4 km2 of the central part of the city was flown within a single airborne lidar and photogrammetric mission to capture the upper parts of buildings and vegetation. The acquired airborne data were used to generate a 3D city model and the time series of terrestrial lidar data were integrated with the 3D city model. The results show that the terrestrial and airborne laser scanning techniques can be effectively used to monitor seasonal changes in foliage of trees in order to assess the transmissivity of the canopy for microclimate modelling.

A new approach towards image based virtual 3D city modeling by using close range photogrammetry

NASA Astrophysics Data System (ADS)

Singh, S. P.; Jain, K.; Mandla, V. R.

2014-05-01

3D city model is a digital representation of the Earth's surface and it's related objects such as building, tree, vegetation, and some manmade feature belonging to urban area. The demand of 3D city modeling is increasing day to day for various engineering and non-engineering applications. Generally three main image based approaches are using for virtual 3D city models generation. In first approach, researchers used Sketch based modeling, second method is Procedural grammar based modeling and third approach is Close range photogrammetry based modeling. Literature study shows that till date, there is no complete solution available to create complete 3D city model by using images. These image based methods also have limitations This paper gives a new approach towards image based virtual 3D city modeling by using close range photogrammetry. This approach is divided into three sections. First, data acquisition process, second is 3D data processing, and third is data combination process. In data acquisition process, a multi-camera setup developed and used for video recording of an area. Image frames created from video data. Minimum required and suitable video image frame selected for 3D processing. In second section, based on close range photogrammetric principles and computer vision techniques, 3D model of area created. In third section, this 3D model exported to adding and merging of other pieces of large area. Scaling and alignment of 3D model was done. After applying the texturing and rendering on this model, a final photo-realistic textured 3D model created. This 3D model transferred into walk-through model or in movie form. Most of the processing steps are automatic. So this method is cost effective and less laborious. Accuracy of this model is good. For this research work, study area is the campus of department of civil engineering, Indian Institute of Technology, Roorkee. This campus acts as a prototype for city. Aerial photography is restricted in many country

Scenario prediction of emerging coastal city using CA modeling under different environmental conditions: a case study of Lingang New City, China.

PubMed

Feng, Yongjiu; Liu, Yan

2016-09-01

The world's coastal regions are experiencing rapid urbanization coupled with increased risk of ecological damage and storm surge related to global climate and sea level rising. This urban development issue is particularly important in China, where many emerging coastal cities are being developed. Lingang New City, southeast of Shanghai, is an excellent example of a coastal city that is increasingly vulnerable to environmental change. Sustainable urban development requires planning that classifies and allocates coastal lands using objective procedures that incorporate changing environmental conditions. In this paper, we applied cellular automata (CA) modeling based on self-adaptive genetic algorithm (SAGA) to predict future scenarios and explore sustainable urban development options for Lingang. The CA model was calibrated using the 2005 initial status, 2015 final status, and a set of spatial variables. We implemented specific ecological and environmental conditions as spatial constraints for the model and predicted four 2030 scenarios: (a) an urban planning-oriented Plan Scenario; (b) an ecosystem protection-oriented Eco Scenario; (c) a storm surge-affected Storm Scenario; and (d) a scenario incorporating both ecosystem protection and the effects of storm surge, called the Ecostorm Scenario. The Plan Scenario has been taken as the baseline, with the Lingang urban area increasing from 45.8 km(2) in 2015 to 66.8 km(2) in 2030, accounting for 23.9 % of the entire study area. The simulated urban land size of the Plan Scenario in 2030 was taken as the target to accommodate the projected population increase in this city, which was then applied in the remaining three development scenarios. We used CA modeling to reallocate the urban cells to other unconstrained areas in response to changing spatial constraints. Our predictions should be helpful not only in assessing and adjusting the urban planning schemes for Lingang but also for evaluating urban planning in coastal

Spatio-Semantic Comparison of Large 3d City Models in Citygml Using a Graph Database

NASA Astrophysics Data System (ADS)

Nguyen, S. H.; Yao, Z.; Kolbe, T. H.

2017-10-01

A city may have multiple CityGML documents recorded at different times or surveyed by different users. To analyse the city's evolution over a given period of time, as well as to update or edit the city model without negating modifications made by other users, it is of utmost importance to first compare, detect and locate spatio-semantic changes between CityGML datasets. This is however difficult due to the fact that CityGML elements belong to a complex hierarchical structure containing multi-level deep associations, which can basically be considered as a graph. Moreover, CityGML allows multiple syntactic ways to define an object leading to syntactic ambiguities in the exchange format. Furthermore, CityGML is capable of including not only 3D urban objects' graphical appearances but also their semantic properties. Since to date, no known algorithm is capable of detecting spatio-semantic changes in CityGML documents, a frequent approach is to replace the older models completely with the newer ones, which not only costs computational resources, but also loses track of collaborative and chronological changes. Thus, this research proposes an approach capable of comparing two arbitrarily large-sized CityGML documents on both semantic and geometric level. Detected deviations are then attached to their respective sources and can easily be retrieved on demand. As a result, updating a 3D city model using this approach is much more efficient as only real changes are committed. To achieve this, the research employs a graph database as the main data structure for storing and processing CityGML datasets in three major steps: mapping, matching and updating. The mapping process transforms input CityGML documents into respective graph representations. The matching process compares these graphs and attaches edit operations on the fly. Found changes can then be executed using the Web Feature Service (WFS), the standard interface for updating geographical features across the web.

Modeling of urban solid waste management system: The case of Dhaka city

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sufian, M.A.; Bala, B.K.

2007-07-01

This paper presents a system dynamics computer model to predict solid waste generation, collection capacity and electricity generation from solid waste and to assess the needs for waste management of the urban city of Dhaka, Bangladesh. Simulated results show that solid waste generation, collection capacity and electricity generation potential from solid waste increase with time. Population, uncleared waste, untreated waste, composite index and public concern are projected to increase with time for Dhaka city. Simulated results also show that increasing the budget for collection capacity alone does not improve environmental quality; rather an increased budget is required for both collectionmore » and treatment of solid wastes of Dhaka city. Finally, this model can be used as a computer laboratory for urban solid waste management (USWM) policy analysis.« less

High brightness laser-diode device emitting 160 watts from a 100 μm/NA 0.22 fiber.

PubMed

Yu, Junhong; Guo, Linui; Wu, Hualing; Wang, Zhao; Tan, Hao; Gao, Songxin; Wu, Deyong; Zhang, Kai

2015-11-10

A practical method of achieving a high-brightness and high-power fiber-coupled laser-diode device is demonstrated both by experiment and ZEMAX software simulation, which is obtained by a beam transformation system, free-space beam combining, and polarization beam combining based on a mini-bar laser-diode chip. Using this method, fiber-coupled laser-diode module output power from the multimode fiber with 100 μm core diameter and 0.22 numerical aperture (NA) could reach 174 W, with equalizing brightness of 14.2  MW/(cm2·sr). By this method, much wider applications of fiber-coupled laser-diodes are anticipated.

Towards Automatic Semantic Labelling of 3D City Models

NASA Astrophysics Data System (ADS)

Rook, M.; Biljecki, F.; Diakité, A. A.

2016-10-01

The lack of semantic information in many 3D city models is a considerable limiting factor in their use, as a lot of applications rely on semantics. Such information is not always available, since it is not collected at all times, it might be lost due to data transformation, or its lack may be caused by non-interoperability in data integration from other sources. This research is a first step in creating an automatic workflow that semantically labels plain 3D city model represented by a soup of polygons, with semantic and thematic information, as defined in the CityGML standard. The first step involves the reconstruction of the topology, which is used in a region growing algorithm that clusters upward facing adjacent triangles. Heuristic rules, embedded in a decision tree, are used to compute a likeliness score for these regions that either represent the ground (terrain) or a RoofSurface. Regions with a high likeliness score, to one of the two classes, are used to create a decision space, which is used in a support vector machine (SVM). Next, topological relations are utilised to select seeds that function as a start in a region growing algorithm, to create regions of triangles of other semantic classes. The topological relationships of the regions are used in the aggregation of the thematic building features. Finally, the level of detail is detected to generate the correct output in CityGML. The results show an accuracy between 85 % and 99 % in the automatic semantic labelling on four different test datasets. The paper is concluded by indicating problems and difficulties implying the next steps in the research.

What metrics best reflect the energy and carbon intensity of cities? Insights from theory and modeling of 20 US cities

NASA Astrophysics Data System (ADS)

Ramaswami, Anu; Chavez, Abel

2013-09-01

Three broad approaches have emerged for energy and greenhouse gas (GHG) accounting for individual cities: (a) purely in-boundary source-based accounting (IB); (b) community-wide infrastructure GHG emissions footprinting (CIF) incorporating life cycle GHGs (in-boundary plus trans-boundary) of key infrastructures providing water, energy, food, shelter, mobility-connectivity, waste management/sanitation and public amenities to support community-wide activities in cities—all resident, visitor, commercial and industrial activities; and (c) consumption-based GHG emissions footprints (CBF) incorporating life cycle GHGs associated with activities of a sub-set of the community—its final consumption sector dominated by resident households. The latter two activity-based accounts are recommended in recent GHG reporting standards, to provide production-dominated and consumption perspectives of cities, respectively. Little is known, however, on how to normalize and report the different GHG numbers that arise for the same city. We propose that CIF and IB, since they incorporate production, are best reported per unit GDP, while CBF is best reported per capita. Analysis of input-output models of 20 US cities shows that GHGCIF/GDP is well suited to represent differences in urban energy intensity features across cities, while GHGCBF/capita best represents variation in expenditures across cities. These results advance our understanding of the methods and metrics used to represent the energy and GHG performance of cities.

Climate change and heat-related mortality in six cities Part 1: model construction and validation

NASA Astrophysics Data System (ADS)

Gosling, Simon N.; McGregor, Glenn R.; Páldy, Anna

2007-08-01

Heat waves are expected to increase in frequency and magnitude with climate change. The first part of a study to produce projections of the effect of future climate change on heat-related mortality is presented. Separate city-specific empirical statistical models that quantify significant relationships between summer daily maximum temperature ( T max) and daily heat-related deaths are constructed from historical data for six cities: Boston, Budapest, Dallas, Lisbon, London, and Sydney. ‘Threshold temperatures’ above which heat-related deaths begin to occur are identified. The results demonstrate significantly lower thresholds in ‘cooler’ cities exhibiting lower mean summer temperatures than in ‘warmer’ cities exhibiting higher mean summer temperatures. Analysis of individual ‘heat waves’ illustrates that a greater proportion of mortality is due to mortality displacement in cities with less sensitive temperature-mortality relationships than in those with more sensitive relationships, and that mortality displacement is no longer a feature more than 12 days after the end of the heat wave. Validation techniques through residual and correlation analyses of modelled and observed values and comparisons with other studies indicate that the observed temperature-mortality relationships are represented well by each of the models. The models can therefore be used with confidence to examine future heat-related deaths under various climate change scenarios for the respective cities (presented in Part 2).

Solar Potential Analysis and Integration of the Time-Dependent Simulation Results for Semantic 3d City Models Using Dynamizers

NASA Astrophysics Data System (ADS)

Chaturvedi, K.; Willenborg, B.; Sindram, M.; Kolbe, T. H.

2017-10-01

Semantic 3D city models play an important role in solving complex real-world problems and are being adopted by many cities around the world. A wide range of application and simulation scenarios directly benefit from the adoption of international standards such as CityGML. However, most of the simulations involve properties, whose values vary with respect to time, and the current generation semantic 3D city models do not support time-dependent properties explicitly. In this paper, the details of solar potential simulations are provided operating on the CityGML standard, assessing and estimating solar energy production for the roofs and facades of the 3D building objects in different ways. Furthermore, the paper demonstrates how the time-dependent simulation results are better-represented inline within 3D city models utilizing the so-called Dynamizer concept. This concept not only allows representing the simulation results in standardized ways, but also delivers a method to enhance static city models by such dynamic property values making the city models truly dynamic. The dynamizer concept has been implemented as an Application Domain Extension of the CityGML standard within the OGC Future City Pilot Phase 1. The results are given in this paper.

Human CD22 cannot fully substitute murine CD22 functions in vivo, as shown in a new knockin mouse model.

PubMed

Wöhner, Miriam; Born, Stefanie; Nitschke, Lars

2012-11-01

CD22, an inhibitory co-receptor of the B-cell receptor, shows a B-cell-specific expression pattern and is expressed on most B-cell lymphomas. The anti-CD22 antibody Epratuzumab is in clinical trials for B-cell non-Hodgkin lymphoma and systemic lupus erythematosus, but shows a mostly unknown mode of action. We generated a new mouse model that expresses human CD22 instead of murine CD22 (Huki CD22 mice), in which human CD22 can be targeted. Expression of human CD22 on the B cells of Huki CD22 mice does not generally interfere with B-cell development. However, Huki CD22 mice show a reduction of the population of mature recirculating B cells in the bone marrow and reduced transitional and marginal zone B cells in the spleen, phenotypes resembling that of CD22-deficient mice. Similarly, enhanced BCR-induced Ca(2+) signalling is observed in Huki CD22 mice, which also mount normal immune responses toward different classes of antigens. Huki CD22 B cells show a normal anti-hCD22 antibody-mediated endocytosis. In conclusion, human CD22 cannot fully substitute for murine CD22 functions, possibly due to the changed intracellular tail of the protein or due to lower expression levels. Huki CD22 mice are a valuable new model for both antibody- and immunotoxin-mediated targeting of human CD22. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Zipf's law in city size from a resource utilization model.

PubMed

Ghosh, Asim; Chatterjee, Arnab; Chakrabarti, Anindya S; Chakrabarti, Bikas K

2014-10-01

We study a resource utilization scenario characterized by intrinsic fitness. To describe the growth and organization of different cities, we consider a model for resource utilization where many restaurants compete, as in a game, to attract customers using an iterative learning process. Results for the case of restaurants with uniform fitness are reported. When fitness is uniformly distributed, it gives rise to a Zipf law for the number of customers. We perform an exact calculation for the utilization fraction for the case when choices are made independent of fitness. A variant of the model is also introduced where the fitness can be treated as an ability to stay in the business. When a restaurant loses customers, its fitness is replaced by a random fitness. The steady state fitness distribution is characterized by a power law, while the distribution of the number of customers still follows the Zipf law, implying the robustness of the model. Our model serves as a paradigm for the emergence of Zipf law in city size distribution.

Zipf's law in city size from a resource utilization model

NASA Astrophysics Data System (ADS)

Ghosh, Asim; Chatterjee, Arnab; Chakrabarti, Anindya S.; Chakrabarti, Bikas K.

2014-10-01

We study a resource utilization scenario characterized by intrinsic fitness. To describe the growth and organization of different cities, we consider a model for resource utilization where many restaurants compete, as in a game, to attract customers using an iterative learning process. Results for the case of restaurants with uniform fitness are reported. When fitness is uniformly distributed, it gives rise to a Zipf law for the number of customers. We perform an exact calculation for the utilization fraction for the case when choices are made independent of fitness. A variant of the model is also introduced where the fitness can be treated as an ability to stay in the business. When a restaurant loses customers, its fitness is replaced by a random fitness. The steady state fitness distribution is characterized by a power law, while the distribution of the number of customers still follows the Zipf law, implying the robustness of the model. Our model serves as a paradigm for the emergence of Zipf law in city size distribution.

Looking northeast over Piers 22 and 23 toward Mare Island ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking northeast over Piers 22 and 23 toward Mare Island Strait and the City of Vallejo - Mare Island Naval Shipyard, Finger Piers 22 & 23, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

22. HEAD GATE IN THE NORTHEAST QUARTER OF SECTION 35; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. HEAD GATE IN THE NORTHEAST QUARTER OF SECTION 35; NOTE CONTROL WHEEL. - Highline Canal, Sand Creek Lateral, Beginning at intersection of Peoria Street & Highline Canal in Arapahoe County (City of Aurora), Sand Creek lateral Extends 15 miles Northerly through Araphoe County, City & County of Denver, & Adams County to its end point, approximately 1/4 mile Southest of intersectioin of D Street & Ninth Avenue in Adams County (Rocky Mountain Arsenal, Commerce City Vicinity), Commerce City, Adams County, CO

Improving 3d Spatial Queries Search: Newfangled Technique of Space Filling Curves in 3d City Modeling

NASA Astrophysics Data System (ADS)

Uznir, U.; Anton, F.; Suhaibah, A.; Rahman, A. A.; Mioc, D.

2013-09-01

The advantages of three dimensional (3D) city models can be seen in various applications including photogrammetry, urban and regional planning, computer games, etc.. They expand the visualization and analysis capabilities of Geographic Information Systems on cities, and they can be developed using web standards. However, these 3D city models consume much more storage compared to two dimensional (2D) spatial data. They involve extra geometrical and topological information together with semantic data. Without a proper spatial data clustering method and its corresponding spatial data access method, retrieving portions of and especially searching these 3D city models, will not be done optimally. Even though current developments are based on an open data model allotted by the Open Geospatial Consortium (OGC) called CityGML, its XML-based structure makes it challenging to cluster the 3D urban objects. In this research, we propose an opponent data constellation technique of space-filling curves (3D Hilbert curves) for 3D city model data representation. Unlike previous methods, that try to project 3D or n-dimensional data down to 2D or 3D using Principal Component Analysis (PCA) or Hilbert mappings, in this research, we extend the Hilbert space-filling curve to one higher dimension for 3D city model data implementations. The query performance was tested using a CityGML dataset of 1,000 building blocks and the results are presented in this paper. The advantages of implementing space-filling curves in 3D city modeling will improve data retrieval time by means of optimized 3D adjacency, nearest neighbor information and 3D indexing. The Hilbert mapping, which maps a subinterval of the [0, 1] interval to the corresponding portion of the d-dimensional Hilbert's curve, preserves the Lebesgue measure and is Lipschitz continuous. Depending on the applications, several alternatives are possible in order to cluster spatial data together in the third dimension compared to its

New Defective Brannerite-Type Vanadates. I. Synthesis and Study of Mn 1- x- yφ xNa yV 2-2 x-yMo 2 x+yO 6 Solid Solutions

NASA Astrophysics Data System (ADS)

Masłowska, Bogna; Ziółkowski, Jacek

1994-05-01

MnV 2O 6 of the brannerite-type structure (below 540°C) doped with MoO 3 and Na 2O forms isomorphous solid solutions MnNaφ = Mn 1- x-yφ xNa yV 2-2 x-yMo 2 x+ yO 6 (φ cation vacancy in the original Mn position), belonging to the pseudoternary MnV 2O 6-NaVMoO 6-MoO 3 system. Particular cases are MnNa = Mn 1- yNa y V 2- yMo yO 6 ( x = 0), Mnφ = Mn 1- xφ xV 2-2 xMo 2 xO 6 ( y = 0), and Naφ = Na 1- xφ xV 1- xMo 1+ xO 6 ( x + y = 1). MnV 2O 6 and NaVMoO 6 show miscibility in the entire composition range (MnNa). The opposite boundary of MnNaφ passes through the (100 x, 100 y) points (45, 0), (33, 30), and (30, 70). The phase diagram of the pseudobinary MnV 2O 6-NaVMoO 6 system (determined with DTA) shows (i) a narrow double-lens-type solidus-liquidus gap at high values of y , (ii) two peritectic meltings at lower y (yielding the high temperature β-MnNa and Mn 2V 2O 7), and (iii) little area of β-MnNa. Lattice parameters of MnNa (determined with X-ray diffraction) reveal small deviations from Vegard's law. As the ionic radii of both dopants (Na + and Mo 6+) are, respectively, larger than those of mother ions (Mn 2+ and V 5+), the unit cell increases in all directions with rising y along the MnNa series of solid solutions. However, due to the anisotropy of the structure, parameter c is strongly sensitive to Na/Mn substitution, b is ruled by Mo/V, and a is weakly influenced by Mo/V. Close analogy to the behavior of the previously studied MnV 2O 6-LiVMoO 6-MoO 6 system is discussed.

Inner-City Networking: Models and Opportunities.

ERIC Educational Resources Information Center

Sparrow, Judith; Vedantham, Anu

1995-01-01

Explores possibilities of inner-city networking, and provides a description of the federal government's Telecommunications and Information Infrastructure Assistance Program (TIIAP). The authors also enumerate the challenges faced by inner-city communities establishing such networks and describes TIIAP-funded programs meeting those challenges that…

Improving Semantic Updating Method on 3d City Models Using Hybrid Semantic-Geometric 3d Segmentation Technique

NASA Astrophysics Data System (ADS)

Sharkawi, K.-H.; Abdul-Rahman, A.

2013-09-01

Cities and urban areas entities such as building structures are becoming more complex as the modern human civilizations continue to evolve. The ability to plan and manage every territory especially the urban areas is very important to every government in the world. Planning and managing cities and urban areas based on printed maps and 2D data are getting insufficient and inefficient to cope with the complexity of the new developments in big cities. The emergence of 3D city models have boosted the efficiency in analysing and managing urban areas as the 3D data are proven to represent the real world object more accurately. It has since been adopted as the new trend in buildings and urban management and planning applications. Nowadays, many countries around the world have been generating virtual 3D representation of their major cities. The growing interest in improving the usability of 3D city models has resulted in the development of various tools for analysis based on the 3D city models. Today, 3D city models are generated for various purposes such as for tourism, location-based services, disaster management and urban planning. Meanwhile, modelling 3D objects are getting easier with the emergence of the user-friendly tools for 3D modelling available in the market. Generating 3D buildings with high accuracy also has become easier with the availability of airborne Lidar and terrestrial laser scanning equipments. The availability and accessibility to this technology makes it more sensible to analyse buildings in urban areas using 3D data as it accurately represent the real world objects. The Open Geospatial Consortium (OGC) has accepted CityGML specifications as one of the international standards for representing and exchanging spatial data, making it easier to visualize, store and manage 3D city models data efficiently. CityGML able to represents the semantics, geometry, topology and appearance of 3D city models in five well-defined Level-of-Details (LoD), namely LoD0

Prevalence of antiretroviral drug resistance and resistance-associated mutations in antiretroviral therapy-naïve HIV-infected individuals from 40 United States cities.

PubMed

Ross, Lisa; Lim, Michael L; Liao, Qiming; Wine, Brian; Rodriguez, Allan E; Weinberg, Winkler; Shaefer, Mark

2007-01-01

Transmission of drug-resistant HIV strains to antiretroviral therapy (ART)-naïve subjects can negatively impact therapy response. As treatment strategies and utilization of antiretroviral drugs evolve, patterns of transmitted mutations may shift. Paired genotypic and phenotypic susceptibility data were retrospectively analyzed for 317 ART-naïve, HIV-infected subjects from 40 small and major metropolitan cities in the Northeastern, Midwestern, Southern, Southwestern, and Northwestern United States during 2003. Using current (January 2007) PhenoSense cutoffs, HIV-from 8% of subjects had reduced susceptibility to > or = 1 drug. By class, < 1% had reduced susceptibility to protease inhibitors (PIs), and 1% had reduced susceptibility to nucleoside reverse transcriptase inhibitors (NRTIs); reduced susceptibility to > or = 1 non-nucleoside reverse transcriptase inhibitor (NNRTIs) was seen in 7% of subjects, with 4% of all subjects having reduced susceptibility to all NNRTIs. IAS-USA-defined NRTI, NNRTI, and/or major PI HIV-drug resistance-associated mutations were detected for 0% of the subjects. HIV risk factors included homosexual contact (74%), heterosexual contact (28%), and injectable drug use/transfusion/other (7%). Reduced susceptibility to > or = 1 drug was significantly higher (p = .034) for white subjects than African Americans and Hispanics/others. The high prevalence of drug resistance in these ART-naïve subjects suggests that transmitted resistance is occurring widely within the United States. HIV genotyping and/or phenotyping for antiretroviral-naïve patients seeking treatment should be considered, especially if the therapy will include an NNRTI.

Transepithelial glucose transport and Na+/K+ homeostasis in enterocytes: an integrative model

PubMed Central

Drengstig, Tormod; Ruoff, Peter

2014-01-01

The uptake of glucose and the nutrient coupled transcellular sodium traffic across epithelial cells in the small intestine has been an ongoing topic in physiological research for over half a century. Driving the uptake of nutrients like glucose, enterocytes must have regulatory mechanisms that respond to the considerable changes in the inflow of sodium during absorption. The Na-K-ATPase membrane protein plays a major role in this regulation. We propose the hypothesis that the amount of active Na-K-ATPase in enterocytes is directly regulated by the concentration of intracellular Na+ and that this regulation together with a regulation of basolateral K permeability by intracellular ATP gives the enterocyte the ability to maintain ionic Na+/K+ homeostasis. To explore these regulatory mechanisms, we present a mathematical model of the sodium coupled uptake of glucose in epithelial enterocytes. Our model integrates knowledge about individual transporter proteins including apical SGLT1, basolateral Na-K-ATPase, and GLUT2, together with diffusion and membrane potentials. The intracellular concentrations of glucose, sodium, potassium, and chloride are modeled by nonlinear differential equations, and molecular flows are calculated based on experimental kinetic data from the literature, including substrate saturation, product inhibition, and modulation by membrane potential. Simulation results of the model without the addition of regulatory mechanisms fit well with published short-term observations, including cell depolarization and increased concentration of intracellular glucose and sodium during increased concentration of luminal glucose/sodium. Adding regulatory mechanisms for regulation of Na-K-ATPase and K permeability to the model show that our hypothesis predicts observed long-term ionic homeostasis. PMID:24898586

Rethinking GIS Towards The Vision Of Smart Cities Through CityGML

NASA Astrophysics Data System (ADS)

Guney, C.

2016-10-01

Smart cities present a substantial growth opportunity in the coming years. The role of GIS in the smart city ecosystem is to integrate different data acquired by sensors in real time and provide better decisions, more efficiency and improved collaboration. Semantically enriched vision of GIS will help evolve smart cities into tomorrow's much smarter cities since geospatial/location data and applications may be recognized as a key ingredient of smart city vision. However, it is need for the Geospatial Information communities to debate on "Is 3D Web and mobile GIS technology ready for smart cities?" This research places an emphasis on the challenges of virtual 3D city models on the road to smarter cities.

Single-tier city logistics model for single product

NASA Astrophysics Data System (ADS)

Saragih, N. I.; Nur Bahagia, S.; Suprayogi; Syabri, I.

2017-11-01

This research develops single-tier city logistics model which consists of suppliers, UCCs, and retailers. The problem that will be answered in this research is how to determine the location of UCCs, to allocate retailers to opened UCCs, to assign suppliers to opened UCCs, to control inventory in the three entities involved, and to determine the route of the vehicles from opened UCCs to retailers. This model has never been developed before. All the decisions will be simultaneously optimized. Characteristic of the demand is probabilistic following a normal distribution, and the number of product is single.

Design of 150W, 105-μm, 0.22NA, fiber coupled laser diode module by ZEMAX

NASA Astrophysics Data System (ADS)

Qi, Yunfei; Zhao, Pengfei; Chen, Qing; Wu, Yulong; Chen, Yongqi; Zou, Yonggang; Lin, Xuechun

2016-10-01

We represent a design of a high brightness, fiber coupled diode laser module based on 16 single emitters at 915nm. The module can produce more than 150 Watts output power from a standard fiber with core diameter of 105μm and numerical aperture (NA) of 0.22. To achieve a high power and high brightness laser beam, the spatial beam combination and polarization beam combination are used to combine output of 16 single emitters into a single beam, and then an aspheric lens is used to couple the combined beam into an optical fiber. The simulation show that the total coupling efficiency is more than 95% and the highest brightness is estimated to be 11MW/ (cm2*sr).

Characterization of the cardiac Na+/K+ pump by development of a comprehensive and mechanistic model.

PubMed

Oka, Chiaki; Cha, Chae Young; Noma, Akinori

2010-07-07

A large amount of experimental data on the characteristics of the cardiac Na(+)/K(+) pump have been accumulated, but it remains difficult to predict the quantitative contribution of the pump in an intact cell because most measurements have been made under non-physiological conditions. To extrapolate the experimental findings to intact cells, we have developed a comprehensive Na(+)/K(+) pump model based on the thermodynamic framework (Smith and Crampin, 2004) of the Post-Albers reaction cycle combined with access channel mechanisms. The new model explains a variety of experimental results for the Na(+)/K(+) pump current (I(NaK)), including the dependency on the concentrations of Na(+) and K(+), the membrane potential and the free energy of ATP hydrolysis. The model demonstrates that both the apparent affinity and the slope of the substrate-I(NaK) relationship measured experimentally are affected by the composition of ions in the extra- and intracellular solutions, indirectly through alteration in the probability distribution of individual enzyme intermediates. By considering the voltage dependence in the Na(+)- and K(+)-binding steps, the experimental voltage-I(NaK) relationship could be reconstructed with application of experimental ionic compositions in the model, and the view of voltage-dependent K(+) binding was supported. Re-evaluation of charge movements accompanying Na(+) and K(+) translocations gave a reasonable number for the site density of the Na(+)/K(+) pump on the membrane. The new model is relevant for simulation of cellular functions under various interventions, such as depression of energy metabolism. (c) 2010 Elsevier Ltd. All rights reserved.

Geospatial Data Processing for 3d City Model Generation, Management and Visualization

NASA Astrophysics Data System (ADS)

Toschi, I.; Nocerino, E.; Remondino, F.; Revolti, A.; Soria, G.; Piffer, S.

2017-05-01

Recent developments of 3D technologies and tools have increased availability and relevance of 3D data (from 3D points to complete city models) in the geospatial and geo-information domains. Nevertheless, the potential of 3D data is still underexploited and mainly confined to visualization purposes. Therefore, the major challenge today is to create automatic procedures that make best use of available technologies and data for the benefits and needs of public administrations (PA) and national mapping agencies (NMA) involved in "smart city" applications. The paper aims to demonstrate a step forward in this process by presenting the results of the SENECA project (Smart and SustaiNablE City from Above - http://seneca.fbk.eu). State-of-the-art processing solutions are investigated in order to (i) efficiently exploit the photogrammetric workflow (aerial triangulation and dense image matching), (ii) derive topologically and geometrically accurate 3D geo-objects (i.e. building models) at various levels of detail and (iii) link geometries with non-spatial information within a 3D geo-database management system accessible via web-based client. The developed methodology is tested on two case studies, i.e. the cities of Trento (Italy) and Graz (Austria). Both spatial (i.e. nadir and oblique imagery) and non-spatial (i.e. cadastral information and building energy consumptions) data are collected and used as input for the project workflow, starting from 3D geometry capture and modelling in urban scenarios to geometry enrichment and management within a dedicated webGIS platform.

Benefits of explicit urban parameterization in regional climate modeling to study climate and city interactions

NASA Astrophysics Data System (ADS)

Daniel, M.; Lemonsu, Aude; Déqué, M.; Somot, S.; Alias, A.; Masson, V.

2018-06-01

Most climate models do not explicitly model urban areas and at best describe them as rock covers. Nonetheless, the very high resolutions reached now by the regional climate models may justify and require a more realistic parameterization of surface exchanges between urban canopy and atmosphere. To quantify the potential impact of urbanization on the regional climate, and evaluate the benefits of a detailed urban canopy model compared with a simpler approach, a sensitivity study was carried out over France at a 12-km horizontal resolution with the ALADIN-Climate regional model for 1980-2009 time period. Different descriptions of land use and urban modeling were compared, corresponding to an explicit modeling of cities with the urban canopy model TEB, a conventional and simpler approach representing urban areas as rocks, and a vegetated experiment for which cities are replaced by natural covers. A general evaluation of ALADIN-Climate was first done, that showed an overestimation of the incoming solar radiation but satisfying results in terms of precipitation and near-surface temperatures. The sensitivity analysis then highlighted that urban areas had a significant impact on modeled near-surface temperature. A further analysis on a few large French cities indicated that over the 30 years of simulation they all induced a warming effect both at daytime and nighttime with values up to + 1.5 °C for the city of Paris. The urban model also led to a regional warming extending beyond the urban areas boundaries. Finally, the comparison to temperature observations available for Paris area highlighted that the detailed urban canopy model improved the modeling of the urban heat island compared with a simpler approach.

Models of Voltage-Dependent Conformational Changes in NaChBac Channels

PubMed Central

Shafrir, Yinon; Durell, Stewart R.; Guy, H. Robert

2008-01-01

Models of the transmembrane region of the NaChBac channel were developed in two open/inactivated and several closed conformations. Homology models of NaChBac were developed using crystal structures of Kv1.2 and a Kv1.2/2.1 chimera as templates for open conformations, and MlotiK and KcsA channels as templates for closed conformations. Multiple molecular-dynamic simulations were performed to refine and evaluate these models. A striking difference between the S4 structures of the Kv1.2-like open models and MlotiK-like closed models is the secondary structure. In the open model, the first part of S4 forms an α-helix, and the last part forms a 310 helix, whereas in the closed model, the first part of S4 forms a 310 helix, and the last part forms an α-helix. A conformational change that involves this type of transition in secondary structure should be voltage-dependent. However, this transition alone is not sufficient to account for the large gating charge movement reported for NaChBac channels and for experimental results in other voltage-gated channels. To increase the magnitude of the motion of S4, we developed another model of an open/inactivated conformation, in which S4 is displaced farther outward, and a number of closed models in which S4 is displaced farther inward. A helical screw motion for the α-helical part of S4 and a simple axial translation for the 310 portion were used to develop models of these additional conformations. In our models, four positively charged residues of S4 moved outwardly during activation, across a transition barrier formed by highly conserved hydrophobic residues on S1, S2, and S3. The S4 movement was coupled to an opening of the activation gate formed by S6 through interactions with the segment linking S4 to S5. Consistencies of our models with experimental studies of NaChBac and Kv channels are discussed. PMID:18641074

Low-carbon infrastructure strategies for cities

NASA Astrophysics Data System (ADS)

Kennedy, C. A.; Ibrahim, N.; Hoornweg, D.

2014-05-01

Reducing greenhouse gas emissions to avert potentially disastrous global climate change requires substantial redevelopment of infrastructure systems. Cities are recognized as key actors for leading such climate change mitigation efforts. We have studied the greenhouse gas inventories and underlying characteristics of 22 global cities. These cities differ in terms of their climates, income, levels of industrial activity, urban form and existing carbon intensity of electricity supply. Here we show how these differences in city characteristics lead to wide variations in the type of strategies that can be used for reducing emissions. Cities experiencing greater than ~1,500 heating degree days (below an 18 °C base), for example, will review building construction and retrofitting for cold climates. Electrification of infrastructure technologies is effective for cities where the carbon intensity of the grid is lower than ~600 tCO2e GWh-1 whereas transportation strategies will differ between low urban density (<~6,000 persons km-2) and high urban density (>~6,000 persons km-2) cities. As nation states negotiate targets and develop policies for reducing greenhouse gas emissions, attention to the specific characteristics of their cities will broaden and improve their suite of options. Beyond carbon pricing, markets and taxation, governments may develop policies and target spending towards low-carbon urban infrastructure.

High-precision Q EC -value measurement of the superallowed β + emitter Mg 22 and an ab initio evaluation of the A = 22 isobaric triplet

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reiter, M. P.; Leach, K. G.; Drozdowski, O. M.

The direct atomic mass difference between 22Mg and 22Na was measured using TRIUMF's Ion Trap for Atomic and Nuclear Science (TITAN) and was determined to be Q=4781.40(22) keV. This measurement represents the most precise single measurement of this quantity to date.

High-precision Q EC -value measurement of the superallowed β + emitter Mg 22 and an ab initio evaluation of the A = 22 isobaric triplet

DOE PAGES

Reiter, M. P.; Leach, K. G.; Drozdowski, O. M.; ...

2017-11-06

The direct atomic mass difference between 22Mg and 22Na was measured using TRIUMF's Ion Trap for Atomic and Nuclear Science (TITAN) and was determined to be Q=4781.40(22) keV. This measurement represents the most precise single measurement of this quantity to date.

76 FR 1150 - City of Pasadena, CA; Notice of Filing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. NJ11-9-000] City of Pasadena, CA; Notice of Filing December 30, 2010. Take notice that on December 22, 2010, the City of Pasadena, California (Pasadena) filed its annual revisions to is Transmission Revenue Balancing Account Adjustment and...

76 FR 1151 - City of Banning, CA; Notice of Filing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. NJ11-8-000] City of Banning, CA; Notice of Filing December 30, 2010. Take notice that on December 22, 2010, the City of Banning, California (Banning) filed its annual revisions to is Transmission Revenue Balancing Account Adjustment and a...

Modeling indoor particulate exposures in inner city school classrooms

PubMed Central

Gaffin, Jonathan M.; Petty, Carter R.; Hauptman, Marissa; Kang, Choong-Min; Wolfson, Jack M.; Awad, Yara Abu; Di, Qian; Lai, Peggy S.; Sheehan, William J.; Baxi, Sachin; Coull, Brent A.; Schwartz, Joel D.; Gold, Diane R.; Koutrakis, Petros; Phipatanakul, Wanda

2016-01-01

Outdoor air pollution penetrates buildings and contributes to total indoor exposures. We investigated the relationship of indoor to outdoor particulate matter in inner-city school classrooms. The School Inner City Asthma Study investigates the effect of classroom-based environmental exposures on students with asthma in the northeast United States. Mixed-effects linear models were used to determine the relationships between indoor PM2.5 and BC and their corresponding outdoor concentrations, and to develop a model for predicting exposures to these pollutants. The indoor-outdoor sulfur ratio was used as an infiltration factor of outdoor fine particles. Weeklong concentrations of PM2.5 and BC in 199 samples from 136 classrooms (30 school buildings) were compared to those measured at a central monitoring site averaged over the same timeframe. Mixed effects regression models found significant random intercept and slope effects, which indicate that: 1) there are important PM2.5 sources in classrooms; 2) the penetration of outdoor PM2.5 particles varies by school, and 3) the site-specific outside PM2.5 levels (inferred by the models) differ from those observed at the central monitor site. Similar results were found for BC except for lack of indoor sources. The fitted predictions from the sulfur-adjusted models were moderately predictive of observed indoor pollutant levels (Out of sample correlations: PM2.5: r2 = 0.68, BC; r2 = 0.61). Our results suggest that PM2.5 has important classroom sources, which vary by school. Furthermore, using these mixed effects models, classroom exposures can be accurately predicted for dates when central site measures are available but indoor measures are not available. PMID:27599884

Modeling Surface Climate in US Cities Using Simple Biosphere Model Sib2

NASA Technical Reports Server (NTRS)

Zhang, Ping; Bounoua, Lahouari; Thome, Kurtis; Wolfe, Robert; Imhoff, Marc

2015-01-01

We combine Landsat- and the Moderate Resolution Imaging Spectroradiometer (MODIS)-based products in the Simple Biosphere model (SiB2) to assess the effects of urbanized land on the continental US (CONUS) surface climate. Using National Land Cover Database (NLCD) Impervious Surface Area (ISA), we define more than 300 urban settlements and their surrounding suburban and rural areas over the CONUS. The SiB2 modeled Gross Primary Production (GPP) over the CONUS of 7.10 PgC (1 PgC= 10(exp 15) grams of Carbon) is comparable to the MODIS improved GPP of 6.29 PgC. At state level, SiB2 GPP is highly correlated with MODIS GPP with a correlation coefficient of 0.94. An increasing horizontal GPP gradient is shown from the urban out to the rural area, with, on average, rural areas fixing 30% more GPP than urbans. Cities built in forested biomes have stronger UHI magnitude than those built in short vegetation with low biomass. Mediterranean climate cities have a stronger UHI in wet season than dry season. Our results also show that for urban areas built within forests, 39% of the precipitation is discharged as surface runoff during summer versus 23% in rural areas.

Sky Glow from Cities: The Army Illumination Model v2

DTIC Science & Technology

2011-09-01

magnetic field and is negligible. Zodiacal light is sunlight scattered by interplanetary dust and contributes up to half the brightness of the ...Sky Glow from Cities: The Army Illumination Model v2 by Richard C. Shirkey ARL-TR-5719 September 2011...Approved for public release; distribution is unlimited. NOTICES Disclaimers The

Numerical Studies of Thermal Conditions in Cities - Systematic Model Simulations of Idealized Urban Domains

NASA Astrophysics Data System (ADS)

Heene, V.; Buchholz, S.; Kossmann, M.

2016-12-01

Numerical studies of thermal conditions in cities based on model simulations of idealized urban domains are carried out to investigate how changes in the characteristics of urban areas influence street level air temperatures. The simulated modifications of the urban characteristics represent possible adaptation measures for heat reduction in cities, which are commonly used in urban planning. Model simulations are performed with the thermodynamic version of the 3-dimensional micro-scale urban climate model MUKLIMO_3. The simulated idealized urban areas are designed in a simplistic way, i. e. defining homogeneous squared cities of one settlement type, without orography and centered in the model domain. To assess the impact of different adaptation measures the characteristics of the urban areas have been systematically modified regarding building height, albedo of building roof and impervious surfaces, fraction of impervious surfaces between buildings, and percentage of green roofs. To assess the impact of green and blue infrastructure in cities, different configurations for parks and lakes have been investigated - e. g. varying size and distribution within the city. The experiments are performed for different combinations of typical German settlement types and surrounding rural types under conditions of a typical summer day in July. The adaptation measures implemented in the experiments show different impacts for different settlement types mainly due to the differences in building density, building height or impervious surface fraction. Parks and lakes implemented as adaptation measure show strong potential to reduce daytime air temperature, with cooling effects on their built-up surroundings. At night lakes generate negative and positive effects on air temperature, depending on water temperature. In general, all adaptation measures implemented in experiments reveal different impacts on day and night air temperature.

Modeling Fractal Structure of City-Size Distributions Using Correlation Functions

PubMed Central

Chen, Yanguang

2011-01-01

Zipf's law is one the most conspicuous empirical facts for cities, however, there is no convincing explanation for the scaling relation between rank and size and its scaling exponent. Using the idea from general fractals and scaling, I propose a dual competition hypothesis of city development to explain the value intervals and the special value, 1, of the power exponent. Zipf's law and Pareto's law can be mathematically transformed into one another, but represent different processes of urban evolution, respectively. Based on the Pareto distribution, a frequency correlation function can be constructed. By scaling analysis and multifractals spectrum, the parameter interval of Pareto exponent is derived as (0.5, 1]; Based on the Zipf distribution, a size correlation function can be built, and it is opposite to the first one. By the second correlation function and multifractals notion, the Pareto exponent interval is derived as [1, 2). Thus the process of urban evolution falls into two effects: one is the Pareto effect indicating city number increase (external complexity), and the other the Zipf effect indicating city size growth (internal complexity). Because of struggle of the two effects, the scaling exponent varies from 0.5 to 2; but if the two effects reach equilibrium with each other, the scaling exponent approaches 1. A series of mathematical experiments on hierarchical correlation are employed to verify the models and a conclusion can be drawn that if cities in a given region follow Zipf's law, the frequency and size correlations will follow the scaling law. This theory can be generalized to interpret the inverse power-law distributions in various fields of physical and social sciences. PMID:21949753

Modelling pathogen log10 reduction values achieved by activated sludge treatment using naïve and semi naïve Bayes network models.

PubMed

Carvajal, Guido; Roser, David J; Sisson, Scott A; Keegan, Alexandra; Khan, Stuart J

2015-11-15

Risk management for wastewater treatment and reuse have led to growing interest in understanding and optimising pathogen reduction during biological treatment processes. However, modelling pathogen reduction is often limited by poor characterization of the relationships between variables and incomplete knowledge of removal mechanisms. The aim of this paper was to assess the applicability of Bayesian belief network models to represent associations between pathogen reduction, and operating conditions and monitoring parameters and predict AS performance. Naïve Bayes and semi-naïve Bayes networks were constructed from an activated sludge dataset including operating and monitoring parameters, and removal efficiencies for two pathogens (native Giardia lamblia and seeded Cryptosporidium parvum) and five native microbial indicators (F-RNA bacteriophage, Clostridium perfringens, Escherichia coli, coliforms and enterococci). First we defined the Bayesian network structures for the two pathogen log10 reduction values (LRVs) class nodes discretized into two states (< and ≥ 1 LRV) using two different learning algorithms. Eight metrics, such as Prediction Accuracy (PA) and Area Under the receiver operating Curve (AUC), provided a comparison of model prediction performance, certainty and goodness of fit. This comparison was used to select the optimum models. The optimum Tree Augmented naïve models predicted removal efficiency with high AUC when all system parameters were used simultaneously (AUCs for C. parvum and G. lamblia LRVs of 0.95 and 0.87 respectively). However, metrics for individual system parameters showed only the C. parvum model was reliable. By contrast individual parameters for G. lamblia LRV prediction typically obtained low AUC scores (AUC < 0.81). Useful predictors for C. parvum LRV included solids retention time, turbidity and total coliform LRV. The methodology developed appears applicable for predicting pathogen removal efficiency in water treatment

Policy Model of Sustainable Infrastructure Development (Case Study : Bandarlampung City, Indonesia)

NASA Astrophysics Data System (ADS)

Persada, C.; Sitorus, S. R. P.; Marimin; Djakapermana, R. D.

2018-03-01

Infrastructure development does not only affect the economic aspect, but also social and environmental, those are the main dimensions of sustainable development. Many aspects and actors involved in urban infrastructure development requires a comprehensive and integrated policy towards sustainability. Therefore, it is necessary to formulate an infrastructure development policy that considers various dimensions of sustainable development. The main objective of this research is to formulate policy of sustainable infrastructure development. In this research, urban infrastructure covers transportation, water systems (drinking water, storm water, wastewater), green open spaces and solid waste. This research was conducted in Bandarlampung City. This study use a comprehensive modeling, namely the Multi Dimensional Scaling (MDS) with Rapid Appraisal of Infrastructure (Rapinfra), it uses of Analytic Network Process (ANP) and it uses system dynamics model. The findings of the MDS analysis showed that the status of Bandarlampung City infrastructure sustainability is less sustainable. The ANP analysis produces 8 main indicators of the most influential in the development of sustainable infrastructure. The system dynamics model offered 4 scenarios of sustainable urban infrastructure policy model. The best scenario was implemented into 3 policies consist of: the integrated infrastructure management, the population control, and the local economy development.

Patterns of waste generation: A gradient boosting model for short-term waste prediction in New York City.

PubMed

Johnson, Nicholas E; Ianiuk, Olga; Cazap, Daniel; Liu, Linglan; Starobin, Daniel; Dobler, Gregory; Ghandehari, Masoud

2017-04-01

Historical municipal solid waste (MSW) collection data supplied by the New York City Department of Sanitation (DSNY) was used in conjunction with other datasets related to New York City to forecast municipal solid waste generation across the city. Spatiotemporal tonnage data from the DSNY was combined with external data sets, including the Longitudinal Employer Household Dynamics data, the American Community Survey, the New York City Department of Finance's Primary Land Use and Tax Lot Output data, and historical weather data to build a Gradient Boosting Regression Model. The model was trained on historical data from 2005 to 2011 and validation was performed both temporally and spatially. With this model, we are able to accurately (R2>0.88) forecast weekly MSW generation tonnages for each of the 232 geographic sections in NYC across three waste streams of refuse, paper and metal/glass/plastic. Importantly, the model identifies regularity of urban waste generation and is also able to capture very short timescale fluctuations associated to holidays, special events, seasonal variations, and weather related events. This research shows New York City's waste generation trends and the importance of comprehensive data collection (especially weather patterns) in order to accurately predict waste generation. Copyright © 2017. Published by Elsevier Ltd.

Smart cities of the future

NASA Astrophysics Data System (ADS)

Batty, M.; Axhausen, K. W.; Giannotti, F.; Pozdnoukhov, A.; Bazzani, A.; Wachowicz, M.; Ouzounis, G.; Portugali, Y.

2012-11-01

Here we sketch the rudiments of what constitutes a smart city which we define as a city in which ICT is merged with traditional infrastructures, coordinated and integrated using new digital technologies. We first sketch our vision defining seven goals which concern: developing a new understanding of urban problems; effective and feasible ways to coordinate urban technologies; models and methods for using urban data across spatial and temporal scales; developing new technologies for communication and dissemination; developing new forms of urban governance and organisation; defining critical problems relating to cities, transport, and energy; and identifying risk, uncertainty, and hazards in the smart city. To this, we add six research challenges: to relate the infrastructure of smart cities to their operational functioning and planning through management, control and optimisation; to explore the notion of the city as a laboratory for innovation; to provide portfolios of urban simulation which inform future designs; to develop technologies that ensure equity, fairness and realise a better quality of city life; to develop technologies that ensure informed participation and create shared knowledge for democratic city governance; and to ensure greater and more effective mobility and access to opportunities for urban populations. We begin by defining the state of the art, explaining the science of smart cities. We define six scenarios based on new cities badging themselves as smart, older cities regenerating themselves as smart, the development of science parks, tech cities, and technopoles focused on high technologies, the development of urban services using contemporary ICT, the use of ICT to develop new urban intelligence functions, and the development of online and mobile forms of participation. Seven project areas are then proposed: Integrated Databases for the Smart City, Sensing, Networking and the Impact of New Social Media, Modelling Network Performance

The Model of Landscape Development in Big Cities Of Central Java

NASA Astrophysics Data System (ADS)

Darmawan, E.; Murtini, T. W.

2018-05-01

The existence of urban parks as a part of urban green space is very important for the environment and the citizen of the city, and inseparable part from the urban landscape. In its development, the existence of an urban parks could create a safe, comfortable, productive, and visually aesthetical environment. The problem arising now is a view that the urban parks are often unsuitable with the surrounding. Therefore, the parks are not functional and does not have significant visual. So that, this research is aimed to reveal model of landscape development in big cities in Central Java. The method used is descriptive qualitative that can describe the detail of problem, in determining the plan to overcome the problem. The research location will focused on big cities in Central Java with potential landscape that can be improved. The results of the research will be composed in an international scientific journals and is expected to be a reference in the field of urban landscape arrangement.

UV-B Measurements in Mexico City: Comparison with Modeled UVB and Black Carbon

NASA Astrophysics Data System (ADS)

Marley, N. A.; Gaffney, J. S.; Frederick, J. E.

2004-12-01

Ultraviolet-B radiation (UV-B) represents a chemically important region of the sun's spectrum. At the earth's surface, UV-B can initiate a number of important photochemical reactions (e.g., ozone photolysis) that lead to the formation of OH radicals. Where levels of nitrogen oxides are high and reactive hydrocarbons are found, as in Mexico City and other megacities, UV-B can initiate photochemical smog formation. We used a broadband instrument to obtain UV-B measurements in Mexico City during the Mexico City Metropolitan Area 2003/Mexico City Megacity 2003 field study. We then used a simple radiation model for the Mexico City latitude, altitude, and time of year to construct UV-B contours for comparison with our results. Early morning discrepancies involve reductions in UV-B that are consistent with the presence of significant levels of BC in the Mexico City environment. During most afternoons, UV-B reductions were dominated by clouds. The results are discussed in terms of the potential impacts of BC on UV-B and downwind photochemical processes. The authors wish to thank the researchers at Centro Nacional de Investigación en Calidad Ambiental (CENICA), Mexico City. This work was supported by the U.S. Department of Energy, Atmospheric Science Program (Marley and Gaffney), and the U.S. Environmental Protection Agency (Frederick). We also wish to acknowledge Drs. Mario and Luisa Molina for their help in organizing and directing the Mexico City Metropolitan Area 2003 field study, during which these data were collected.

Na8Au9.8(4)Ga7.2 and Na17Au5.87(2)Ga46.63: The diversity of pseudo 5-fold symmetries in the Na-Au-Ga system

NASA Astrophysics Data System (ADS)

Smetana, Volodymyr; Corbett, John D.; Miller, Gordon J.

2013-11-01

The Na-rich part (~30% Na) of the Na-Au-Ga system between NaAu2, NaGa4, and Na22Ga39 has been found to contain the ternary phases Na8Au9.8(4)Ga7.2 (I) and Na17Au5.87(2)Ga46.63 (II), according to the results of single crystal X-ray diffraction measurements. I is orthorhombic, Cmcm, a=5.3040(1), b=24.519(5), c=14.573(3) Å, and contains a network of clusters with local 5-fold symmetry along the a-axis. Such clusters are frequent building units in decagonal quasicrystals and their approximants. II is rhombohedral, R3¯m, a=16.325(2), c=35.242(7) Å, and contains building blocks that are structurally identical to the Bergman-type clusters as well as fused icosahedral units known with active metals, triels and late transition elements. II also contains a polycationic network with elements of the clathrate V type structure. Tight-binding electronic structure calculations using linear muffin-tin-orbital (LMTO) methods on idealized models of I and II indicate that both compounds are metallic with evident pseudogaps at the corresponding Fermi levels. The overall Hamilton bond populations are generally dominated by Au-Ga and Au-Au bonds in I and by Ga-Ga bonds in II; moreover, the Na-Au and Na-Ga contributions in I are unexpectedly large, ~20% of the total. A similar involvement of sodium in covalent bonding has also been found in the electron-richer i-Na13Au12Ga15 quasicrystal approximant.

Transport spatial model for the definition of green routes for city logistics centers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pamučar, Dragan, E-mail: dpamucar@gmail.com; Gigović, Ljubomir, E-mail: gigoviclj@gmail.com; Ćirović, Goran, E-mail: cirovic@sezampro.rs

This paper presents a transport spatial decision support model (TSDSM) for carrying out the optimization of green routes for city logistics centers. The TSDSM model is based on the integration of the multi-criteria method of Weighted Linear Combination (WLC) and the modified Dijkstra algorithm within a geographic information system (GIS). The GIS is used for processing spatial data. The proposed model makes it possible to plan routes for green vehicles and maximize the positive effects on the environment, which can be seen in the reduction of harmful gas emissions and an increase in the air quality in highly populated areas.more » The scheduling of delivery vehicles is given as a problem of optimization in terms of the parameters of: the environment, health, use of space and logistics operating costs. Each of these input parameters was thoroughly examined and broken down in the GIS into criteria which further describe them. The model presented here takes into account the fact that logistics operators have a limited number of environmentally friendly (green) vehicles available. The TSDSM was tested on a network of roads with 127 links for the delivery of goods from the city logistics center to the user. The model supports any number of available environmentally friendly or environmentally unfriendly vehicles consistent with the size of the network and the transportation requirements. - Highlights: • Model for routing light delivery vehicles in urban areas. • Optimization of green routes for city logistics centers. • The proposed model maximizes the positive effects on the environment. • The model was tested on a real network.« less

Thermodynamic modeling of melts in the system Na 2O-NaAlO 2-SiO 2-F 2O -1

NASA Astrophysics Data System (ADS)

Dolejš, David; Baker, Don R.

2005-12-01

Fluorine is a common volatile element in magmatic-hydrothermal systems, but its solution mechanisms and thermodynamic description in highly polymerized silicate melts are poorly known. We have developed a thermodynamic model for fluorosilicate liquids that links experimentally determined phase equilibria and spectroscopic information on melt structure. The model is applicable to crystallization of fluoride minerals, fluoride-silicate immiscibility in natural felsic melts, and metallurgical processes. Configurational properties of fluorosilicate melts are described by mixing on three site levels (sublattices): (1) alkali fluoride, polyhedral aluminofluoride and silicofluoride species and nonbridging terminations of the aluminosilicate network, (2) alkali-aluminate and silicate tetrahedra within the network and (3) bridging oxygen, nonbridging oxygen and terminal fluorine atoms on tetrahedral apices of the network. Abundances of individual chemical species are described by a homogeneous equilibrium representing melt depolymerization: F - (free) + O 0 (bridging) = F 0 (terminal) + O - (nonbridging) which corresponds to a replacement of an oxygen bridging two tetrahedra by a pair of terminations, one with F and the other with an O and a charge-balancing Na. In cryolite-bearing systems two additional interaction mechanisms occur: (1) the self-dissociation of octahedral aluminofluoride complexes: [AlF 6] = [AlF 4] + 2 [F], and (2) the short-range order between (O,F)-corners and (Si,NaAl)-centers of tetrahedra: Si-O-Si + 2 [NaAl]-F = [NaAl]-O-[NaAl] + 2 Si-F. Portrayal of these equilibria in ternary Thompson reaction space allows for the decrease in the number of interaction mechanisms by linearly combining melt depolymerization with tetrahedral short-range order. In this formulation, the nonideal thermodynamic properties are represented by reaction energies of homogeneous equilibria, thus defining directly individual chemical species concentrations and configurational

A hydrophobic filter confers the cation selectivity of Zygosaccharomyces rouxii plasma-membrane Na+/H+ antiporter.

PubMed

Kinclova-Zimmermannova, Olga; Falson, Pierre; Cmunt, Denis; Sychrova, Hana

2015-04-24

Na(+)/H(+) antiporters may recognize all alkali-metal cations as substrates but may transport them selectively. Plasma-membrane Zygosaccharomyces rouxii Sod2-22 antiporter exports Na(+) and Li(+), but not K(+). The molecular basis of this selectivity is unknown. We combined protein structure modeling, site-directed mutagenesis, phenotype analysis and cation efflux measurements to localize and characterize the cation selectivity region. A three-dimensional model of the ZrSod2-22 transmembrane domain was generated based on the X-ray structure of the Escherichia coli NhaA antiporter and primary sequence alignments with homologous yeast antiporters. The model suggested a close proximity of Thr141, Ala179 and Val375 from transmembrane segments 4, 5 and 11, respectively, forming a hydrophobic hole in the putative cation pathway's core. A series of mutagenesis experiments verified the model and showed that structural modifications of the hole resulted in altered cation selectivity and transport activity. The triple ZrSod2-22 mutant T141S-A179T-V375I gained K(+) transport capacity. The point mutation A179T restricted the antiporter substrate specificity to Li(+) and reduced its transport activity, while serine at this position preserved the native cation selectivity. The negative effect of the A179T mutation can be eliminated by introducing a second mutation, T141S or T141A, in the preceding transmembrane domain. Our experimental results confirm that the three residues found through modeling play a central role in the determination of cation selectivity and transport activity in Z. rouxii Na(+)/H(+) antiporter and that the cation selectivity can be modulated by repositioning a single local methyl group. Copyright © 2015 Elsevier Ltd. All rights reserved.

Analysis and modelling of surface Urban Heat Island in 20 Canadian cities under climate and land-cover change.

PubMed

Gaur, Abhishek; Eichenbaum, Markus Kalev; Simonovic, Slobodan P

2018-01-15

Surface Urban Heat Island (SUHI) is an urban climate phenomenon that is expected to respond to future climate and land-use land-cover change. It is important to further our understanding of physical mechanisms that govern SUHI phenomenon to enhance our ability to model future SUHI characteristics under changing geophysical conditions. In this study, SUHI phenomenon is quantified and modelled at 20 cities distributed across Canada. By analyzing MODerate Resolution Imaging Spectroradiometer (MODIS) sensed surface temperature at the cities over 2002-2012, it is found that 16 out of 20 selected cities have experienced a positive SUHI phenomenon while 4 cities located in the prairies region and high elevation locations have experienced a negative SUHI phenomenon in the past. A statistically significant relationship between observed SUHI magnitude and city elevation is also recorded over the observational period. A Physical Scaling downscaling model is then validated and used to downscale future surface temperature projections from 3 GCMs and 2 extreme Representative Concentration Pathways in the urban and rural areas of the cities. Future changes in SUHI magnitudes between historical (2006-2015) and future timelines: 2030s (2026-2035), 2050s (2046-2055), and 2090s (2091-2100) are estimated. Analysis of future projected changes indicate that 15 (13) out of 20 cities can be expected to experience increases in SUHI magnitudes in future under RCP 2.6 (RCP 8.5). A statistically significant relationship between projected future SUHI change and current size of the cities is also obtained. The study highlights the role of city properties (i.e. its size, elevation, and surrounding land-cover) towards shaping their current and future SUHI characteristics. The results from this analysis will help decision-makers to manage Canadian cities more efficiently under rapidly changing geophysical and demographical conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Theoretical aspects of stress corrosion cracking of Alloy 22

NASA Astrophysics Data System (ADS)

Lee, Sang-Kwon; Macdonald, Digby D.

2018-05-01

Theoretical aspects of the stress corrosion cracking of Alloy 22 in contact with saturated NaCl solution are explored in terms of the Coupled Environment Fracture Model (CEFM), which was calibrated upon available experimental crack growth rate data. Crack growth rate (CGR) was then predicted as a function of stress intensity, electrochemical potential, solution conductivity, temperature, and electrochemical crack length (ECL). From the dependence of the CGR on the ECL and the evolution of a semi-elliptical surface crack in a planar surface under constant loading conditions it is predicted that penetration through the 2.5-cm thick Alloy 22 corrosion resistant layer of the waste package (WP) could occur 32,000 years after nucleation. Accordingly, the crack must nucleate within the first 968,000 years of storage. However, we predict that the Alloy 22 corrosion resistant layer will not be penetrated by SCC within the 10,000-year Intermediate Performance Period, even if a crack nucleates immediately upon placement of the WP in the repository.

22. Photographic copy of photograph of interior of hangar looking ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. Photographic copy of photograph of interior of hangar looking west taken on March 22, 1957. Photographer unknown. Original photograph property of the City of Philadelphia, Division of Aviation. Reprinted with permission of the Division of Aviation. - TWA Maintenance Hangar, South side of Tinicum Island Road, Philadelphia International Airport, Philadelphia, Philadelphia County, PA

An Analysis of Context-Aware Data Models for Smart Cities: Towards Fiware and Etsi Cim Emerging Data Model

NASA Astrophysics Data System (ADS)

Jara, A. J.; Bocchi, Y.; Fernandez, D.; Molina, G.; Gomez, A.

2017-09-01

Smart Cities requires the support of context-aware and enriched semantic descriptions to support a scalable and cross-domain development of smart applications. For example, nowadays general purpose sensors such as crowd monitoring (counting people in an area), environmental information (pollution, air quality, temperature, humidity, noise) etc. can be used in multiple solutions with different objectives. For that reason, a data model that offers advanced capabilities for the description of context is required. This paper presents an overview of the available technologies for this purpose and how it is being addressed by the Open and Agile Smart Cities principles and FIWARE platform through the data models defined by the ETSI ISG Context Information Management (ETSI CIM).

Bifurcation analysis of dengue transmission model in Baguio City, Philippines

NASA Astrophysics Data System (ADS)

Libatique, Criselda P.; Pajimola, Aprimelle Kris J.; Addawe, Joel M.

2017-11-01

In this study, we formulate a deterministic model for the transmission dynamics of dengue fever in Baguio City, Philippines. We analyzed the existence of the equilibria of the dengue model. We computed and obtained conditions for the existence of the equilibrium states. Stability analysis for the system is carried out for disease free equilibrium. We showed that the system becomes stable under certain conditions of the parameters. A particular parameter is taken and with the use of the Theory of Centre Manifold, the proposed model demonstrates a bifurcation phenomenon. We performed numerical simulation to verify the analytical results.

Modeled PM2.5 removal by trees in ten US cities and associated health effects

Treesearch

David J. Nowak; Satoshi Hirabayashi; Allison Bodine; Robert Hoehn

2013-01-01

Urban particulate air pollution is a serious health issue. Trees within cities can remove fine particles from the atmosphere and consequently improve air quality and human health. Tree effects on PM2.5 concentrations and human health are modeled for 10 U.S. cities. The total amount of PM2.5 removed annually by...

The model of flood control using servqual method and importance performance analysis in Surakarta City – Indonesia

NASA Astrophysics Data System (ADS)

Titi Purwantini, V.; Sutanto, Yusuf

2018-05-01

This research is to create a model of flood control in the city of Surakarta using Servqual method and Importance Performance Analysis. Service quality is generally defined as the overall assessment of a service by the customersor the extent to which a service meets customer’s needs or expectations. The purpose of this study is to find the first model of flood control that is appropriate to the condition of the community. Surakarta This means looking for a model that can provide satisfactory service for the people of Surakarta who are in the location of the flood. The second is to find the right model to improve service performance of Surakarta City Government in serving the people in flood location. The method used to determine the satisfaction of the public on the quality of service is to see the difference in the quality of service expected by the community with the reality. This method is Servqual Method While to assess the performance of city government officials is by comparing the actual performance with the quality of services provided, this method is This means looking for a model that can provide satisfactory service for the people of Surakarta who are in the location of the flood.The second is to find the right model to improve service performance of Surakarta City Government in serving the people in flood location. The method used to determine the satisfaction of the public on the quality of service is to see the difference in the quality of service expected by the community with the reality. This method is Servqual Method While to assess the performance of city government officials is by comparing the actual performance with the quality of services provided, this method is Importance Performance Analysis. Samples were people living in flooded areas in the city of Surakarta. Result this research is Satisfaction = Responsiveness+ Realibility + Assurance + Empathy+ Tangible (Servqual Model) and Importance Performance Analysis is From Cartesian diagram

Fluid dilution and efficiency of Na(+) transport in a mathematical model of a thick ascending limb cell.

PubMed

Nieves-González, Aniel; Clausen, Chris; Marcano, Mariano; Layton, Anita T; Layton, Harold E; Moore, Leon C

2013-03-15

Thick ascending limb (TAL) cells are capable of reducing tubular fluid Na(+) concentration to as low as ~25 mM, and yet they are thought to transport Na(+) efficiently owing to passive paracellular Na(+) absorption. Transport efficiency in the TAL is of particular importance in the outer medulla where O(2) availability is limited by low blood flow. We used a mathematical model of a TAL cell to estimate the efficiency of Na(+) transport and to examine how tubular dilution and cell volume regulation influence transport efficiency. The TAL cell model represents 13 major solutes and the associated transporters and channels; model equations are based on mass conservation and electroneutrality constraints. We analyzed TAL transport in cells with conditions relevant to the inner stripe of the outer medulla, the cortico-medullary junction, and the distal cortical TAL. At each location Na(+) transport efficiency was computed as functions of changes in luminal NaCl concentration ([NaCl]), [K(+)], [NH(4)(+)], junctional Na(+) permeability, and apical K(+) permeability. Na(+) transport efficiency was calculated as the ratio of total net Na(+) transport to transcellular Na(+) transport. Transport efficiency is predicted to be highest at the cortico-medullary boundary where the transepithelial Na(+) gradient is the smallest. Transport efficiency is lowest in the cortex where luminal [NaCl] approaches static head.

The Role of Sister Cities' Staff Exchanges in Developing "Learning Cities": Exploring Necessary and Sufficient Conditions in Social Capital Development Utilizing Proportional Odds Modeling.

PubMed

Buckley, Patrick Henry; Takahashi, Akio; Anderson, Amy

2015-06-24

In the last half century former international adversaries have become cooperators through networking and knowledge sharing for decision making aimed at improving quality of life and sustainability; nowhere has this been more striking then at the urban level where such activity is seen as a key component in building "learning cities" through the development of social capital. Although mega-cities have been leaders in such efforts, mid-sized cities with lesser resource endowments have striven to follow by focusing on more frugal sister city type exchanges. The underlying thesis of our research is that great value can be derived from city-to-city exchanges through social capital development. However, such a study must differentiate between necessary and sufficient conditions. Past studies assumed necessary conditions were met and immediately jumped to demonstrating the existence of structural relationships by measuring networking while further assuming that the existence of such demonstrated a parallel development of cognitive social capital. Our research addresses this lacuna by stepping back and critically examining these assumptions. To accomplish this goal we use a Proportional Odds Modeling with a Cumulative Logit Link approach to demonstrate the existence of a common latent structure, hence asserting that necessary conditions are met.

Role of Na+/K+-ATPase in Natriuretic Effect of Prolactin in a Model of Cholestasis of Pregnancy.

PubMed

Abramicheva, P A; Balakina, T A; Bulaeva, O A; Guseva, A A; Lopina, O D; Smirnova, O V

2017-05-01

Participation of Na+/K+-ATPase in the natriuretic effect of prolactin in a cholestasis of pregnancy model was investigated. The Na+/K+-ATPase activity in rat kidney medulla, where active sodium reabsorption occurs, decreased in the model of cholestasis of pregnancy and other hyperprolactinemia types compared with intact animals. This effect was not connected with the protein level of α1- and β-subunits of Na+/K+-ATPase measured by Western blotting in the kidney medulla. Decrease in Na+/K+-ATPase activity in the kidney cortex was not significant, as well as decrease in the quantity of mRNA and proteins of the α1- and β-subunits of Na+/K+-ATPase. There were no correlations between the Na+/K+-ATPase activity and sodium clearance, although sodium clearance increased significantly in the model of cholestasis of pregnancy and other hyperprolactinemia groups under conditions of stable glomerular filtration rate measured by creatinine clearance. We conclude that the Na+/K+-ATPase is not the only mediator of the natriuretic effect of prolactin in the model of cholestasis of pregnancy.

Hydrological Modeling of Storm Water Drainage System due to Frequent and Intense Precipitation of Dhaka city using Storm Water Management Model (SWMM)

NASA Astrophysics Data System (ADS)

Hossain, S., Jr.

2015-12-01

Rainfall induced flooding during rainy season is a regular phenomenon in Dhaka City. Almost every year a significant part of the city suffers badly with drainage congestion. There are some highly dense areas with lower ground elevation which submerge under water even with an intense precipitation of few hours. The higher areas also suffer with the drainage problem due to inadequate maintenance of the system and encroachment or illegal filling up of the drainage canals and lakes. Most part of the city suffered from long term urban flooding during historical extreme rainfall events in September 2004, 2007 and July 2009. The situation is likely to worsen in the future due to Climate Change, which may lead to more frequent and intense precipitation. To assess the major and minor drainage systems and elements of the urban basins using the hydrodynamic modelling and, through this, identifying the flooding events and areas, taking into account the current situation and future flood or drainage scenarios. Stormwater modeling has a major role in preventing issues such as flash floods and urban water-quality problems. Stormwater models of a lowered spatial resolution would thus appear valuable if only their ability to provide realistic results could be proved. The present scenario of urban morphology of Dhaka city and existing drainage system is complex for hydrological and hydrodynamic modeling. Furthermore limitations of background data and uncertain future urban scenarios may confine the potential outputs of a model. Although several studies were carried out including modeling for drainage master planning, a detail model for whole DAP (Detaile Area Plan) of Dhaka city area is not available. The model developed under this study is covering the existing drainage system in the study area as well as natural flows in the fringe area. A good number of models are available for hydrological and hydraulic analysis of urban areas. These are MIKE 11, MOUSE, HEC-RAS, HEC HMS and EPA

The Urban Food-Water Nexus: Modeling Water Footprints of Urban Agriculture using CityCrop

NASA Astrophysics Data System (ADS)

Tooke, T. R.; Lathuilliere, M. J.; Coops, N. C.; Johnson, M. S.

2014-12-01

Urban agriculture provides a potential contribution towards more sustainable food production and mitigating some of the human impacts that accompany volatility in regional and global food supply. When considering the capacity of urban landscapes to produce food products, the impact of urban water demand required for food production in cities is often neglected. Urban agricultural studies also tend to be undertaken at broad spatial scales, overlooking the heterogeneity of urban form that exerts an extreme influence on the urban energy balance. As a result, urban planning and management practitioners require, but often do not have, spatially explicit and detailed information to support informed urban agricultural policy, especially as it relates to potential conflicts with sustainability goals targeting water-use. In this research we introduce a new model, CityCrop, a hybrid evapotranspiration-plant growth model that incorporates detailed digital representations of the urban surface and biophysical impacts of the built environment and urban trees to account for the daily variations in net surface radiation. The model enables very fine-scale (sub-meter) estimates of water footprints of potential urban agricultural production. Results of the model are demonstrated for an area in the City of Vancouver, Canada and compared to aspatial model estimates, demonstrating the unique considerations and sensitivities for current and future water footprints of urban agriculture and the implications for urban water planning and policy.

Leaching of biocides from building facades: Upscaling of a local two-region leaching model to the city scale

NASA Astrophysics Data System (ADS)

Coutu, S.; Rota, C.; Rossi, L.; Barry, D. A.

2011-12-01

Facades are protected by paints that contain biocides as protection against degradation. These biocides are leached by rainfall (albeit at low concentrations). At the city scale, however, the surface area of building facades is significant, and leached biocides are a potential environmental risk to receiving waters. A city-scale biocide-leaching model was developed based on two main steps. In the first step, laboratory experiments on a single facade were used to calibrate and validate a 1D, two-region phenomenological model of biocide leaching. The same data set was analyzed independently by another research group who found empirically that biocide leachate breakthrough curves were well represented by a sum of two exponentials. Interestingly, the two-region model was found analytically to reproduce this functional form as a special case. The second step in the method is site-specific, and involves upscaling the validated single facade model to a particular city. In this step, (i) GIS-based estimates of facade heights and areas are deduced using the city's cadastral data, (ii) facade flow is estimated using local meteorological data (rainfall, wind direction) and (iii) paint application rates are modeled as a stochastic process based on manufacturers' recommendations. The methodology was applied to Lausanne, Switzerland, a city of about 200,000 inhabitants. Approximately 30% of the annually applied mass of biocides was estimated to be released to the environment.

Hydrogeologic Investigation, Water Chemistry Analysis, and Model Delineation of contributing Areas for City of Tallahassee Public-Supply Wells, Tallahassee, Florida

USGS Publications Warehouse

Davis, J. Hal; Katz, Brian G.

2007-01-01

Ground water from the Upper Floridan aquifer is the sole source of water supply for Tallahassee, Florida, and the surrounding area. The City of Tallahassee (the City) currently operates 28 water-supply wells; 26 wells are distributed throughout the City and 2 are located in Woodville, Florida. Most of these wells yield an ample supply of potable water; however, water from several wells has low levels of tetrachloroethylene (PCE). The City removes the PCE from the water by passing it through granular-activated carbon units before distribution. To ensure that water-supply wells presently free of contamination remain clean, it is necessary to understand the ground-water flow system in sufficient detail to protect the contributing areas. Ground-water samples collected from four public-supply wells were analyzed for tritium (3H), chlorofluorocarbons (CFCs), and sulfur hexafluoride (SF6). Using data for the CFC compounds, apparent ground-water ages ranged from 7 to 31 years. For SF6, the apparent ages tended to be about 5 to 10 years younger than those from CFCs. Apparent ages based on the tritium/tritiogenic helium-3 (3H/3Hetrit) method ranged from 26 to 33 years. The three dating methods indicate that the apparent age of ground water generally decreases from northern to southern Leon County. This southward trend of decreasing ages is consistent with increasing amounts of recharge that occur as ground water moves from north to south. The ground-water age data derived by geochemical and tracer analyses were used in combination with the flow model and particle tracking to determine an effective porosity for the Hawthorn clays and Upper Floridan aquifer. The effective porosities for the Upper Floridan aquifer that resulted in best model matches were averaged to produce an effective porosity of 7 percent, and the effective porosities for the Hawthorn clays that resulted in a match were averaged to produce an effective porosity of 22 percent. Probabilistic contributing areas

Modeling Fire Occurrence at the City Scale: A Comparison between Geographically Weighted Regression and Global Linear Regression.

PubMed

Song, Chao; Kwan, Mei-Po; Zhu, Jiping

2017-04-08

An increasing number of fires are occurring with the rapid development of cities, resulting in increased risk for human beings and the environment. This study compares geographically weighted regression-based models, including geographically weighted regression (GWR) and geographically and temporally weighted regression (GTWR), which integrates spatial and temporal effects and global linear regression models (LM) for modeling fire risk at the city scale. The results show that the road density and the spatial distribution of enterprises have the strongest influences on fire risk, which implies that we should focus on areas where roads and enterprises are densely clustered. In addition, locations with a large number of enterprises have fewer fire ignition records, probably because of strict management and prevention measures. A changing number of significant variables across space indicate that heterogeneity mainly exists in the northern and eastern rural and suburban areas of Hefei city, where human-related facilities or road construction are only clustered in the city sub-centers. GTWR can capture small changes in the spatiotemporal heterogeneity of the variables while GWR and LM cannot. An approach that integrates space and time enables us to better understand the dynamic changes in fire risk. Thus governments can use the results to manage fire safety at the city scale.

Modeling Fire Occurrence at the City Scale: A Comparison between Geographically Weighted Regression and Global Linear Regression

PubMed Central

Song, Chao; Kwan, Mei-Po; Zhu, Jiping

2017-01-01

An increasing number of fires are occurring with the rapid development of cities, resulting in increased risk for human beings and the environment. This study compares geographically weighted regression-based models, including geographically weighted regression (GWR) and geographically and temporally weighted regression (GTWR), which integrates spatial and temporal effects and global linear regression models (LM) for modeling fire risk at the city scale. The results show that the road density and the spatial distribution of enterprises have the strongest influences on fire risk, which implies that we should focus on areas where roads and enterprises are densely clustered. In addition, locations with a large number of enterprises have fewer fire ignition records, probably because of strict management and prevention measures. A changing number of significant variables across space indicate that heterogeneity mainly exists in the northern and eastern rural and suburban areas of Hefei city, where human-related facilities or road construction are only clustered in the city sub-centers. GTWR can capture small changes in the spatiotemporal heterogeneity of the variables while GWR and LM cannot. An approach that integrates space and time enables us to better understand the dynamic changes in fire risk. Thus governments can use the results to manage fire safety at the city scale. PMID:28397745

Investigating Integration Capabilities Between Ifc and Citygml LOD3 for 3d City Modelling

NASA Astrophysics Data System (ADS)

Floros, G.; Pispidikis, I.; Dimopoulou, E.

2017-10-01

Smart cities are applied to an increasing number of application fields. This evolution though urges data collection and integration, hence major issues arise that need to be tackled. One of the most important challenges is the heterogeneity of collected data, especially if those data derive from different standards and vary in terms of geometry, topology and semantics. Another key challenge is the efficient analysis and visualization of spatial data, which due to the complexity of the physical reality in modern world, 2D GIS struggles to cope with. So, in order to facilitate data analysis and enhance the role of smart cities, the 3rd dimension needs to be implemented. Standards such as CityGML and IFC fulfill that necessity but they present major differences in their schemas that render their integration a challenging task. This paper focuses on addressing those differences, examining the up to date research work and investigates an alternative methodology in order to bridge the gap between those Standards. Within this framework, a generic IFC model is generated and converted to a CityGML Model, which is validated and evaluated on its geometrical correctness and semantical coherence. General results as well as future research considerations are presented.

A Bayesian model averaging approach for estimating the relative risk of mortality associated with heat waves in 105 U.S. cities.

PubMed

Bobb, Jennifer F; Dominici, Francesca; Peng, Roger D

2011-12-01

Estimating the risks heat waves pose to human health is a critical part of assessing the future impact of climate change. In this article, we propose a flexible class of time series models to estimate the relative risk of mortality associated with heat waves and conduct Bayesian model averaging (BMA) to account for the multiplicity of potential models. Applying these methods to data from 105 U.S. cities for the period 1987-2005, we identify those cities having a high posterior probability of increased mortality risk during heat waves, examine the heterogeneity of the posterior distributions of mortality risk across cities, assess sensitivity of the results to the selection of prior distributions, and compare our BMA results to a model selection approach. Our results show that no single model best predicts risk across the majority of cities, and that for some cities heat-wave risk estimation is sensitive to model choice. Although model averaging leads to posterior distributions with increased variance as compared to statistical inference conditional on a model obtained through model selection, we find that the posterior mean of heat wave mortality risk is robust to accounting for model uncertainty over a broad class of models. © 2011, The International Biometric Society.

Population Estimation Using a 3D City Model: A Multi-Scale Country-Wide Study in the Netherlands

PubMed Central

Arroyo Ohori, Ken; Ledoux, Hugo; Peters, Ravi; Stoter, Jantien

2016-01-01

The remote estimation of a region’s population has for decades been a key application of geographic information science in demography. Most studies have used 2D data (maps, satellite imagery) to estimate population avoiding field surveys and questionnaires. As the availability of semantic 3D city models is constantly increasing, we investigate to what extent they can be used for the same purpose. Based on the assumption that housing space is a proxy for the number of its residents, we use two methods to estimate the population with 3D city models in two directions: (1) disaggregation (areal interpolation) to estimate the population of small administrative entities (e.g. neighbourhoods) from that of larger ones (e.g. municipalities); and (2) a statistical modelling approach to estimate the population of large entities from a sample composed of their smaller ones (e.g. one acquired by a government register). Starting from a complete Dutch census dataset at the neighbourhood level and a 3D model of all 9.9 million buildings in the Netherlands, we compare the population estimates obtained by both methods with the actual population as reported in the census, and use it to evaluate the quality that can be achieved by estimations at different administrative levels. We also analyse how the volume-based estimation enabled by 3D city models fares in comparison to 2D methods using building footprints and floor areas, as well as how it is affected by different levels of semantic detail in a 3D city model. We conclude that 3D city models are useful for estimations of large areas (e.g. for a country), and that the 3D approach has clear advantages over the 2D approach. PMID:27254151

APPLICATION OF THE RANDOM COMPONENT SUPERPOSITION (RCS) MODEL TO PM2.5 PERSONAL EXPOSURE AND INDOOR AIR QUALITY MEASUREMENTS IN DIFFERENT CITIES

EPA Science Inventory

The RCS model allows us to estimate the distribution of population exposure to air pollutants in any city given only the outdoor measurements in that city. Since outdoor measurements are made in many cities, but personal exposures are measured in few, the model could conceivab...

Road network - land use interaction model: Malang City in Indonesian case

NASA Astrophysics Data System (ADS)

Waloejo, B. S.

2017-06-01

Urban population in Indonesia is significantly increasing from 44% of total population in 2002 to approximately 60% in 2015. Rapid population growth has resulted in rapid urban land use changes. The problems became more complicated since the changes created mixed use development along the main urban corridors that resulted in higher trip generation and attraction while urban land very limited that made road widening and creation of new road less possible. This led to an accumulation of movement, worse road’s level of service and congestion in the main urban corridor. The aims of the research are to analyse trip generation/attraction of the mixed- land uses of the main corridors Malang City; and to formulate road network - land use interaction model in the case of Malang (a nearly 1 million population city in 2015). The selected corridors in Malang City a main road in the west district of Malang City - Indonesia. Correlational method (Pearson Product Moment) and regression method (stepwise, anova for land use’s trip generation/attraction), and analysis of road’s level of service (LOS), using Indonesian Road Capacity Manual, are employed in this research. The research formulated the interaction model as: \\begin{eqnarray}\\begin{array}{lll}{V}{total} & = & \\displaystyle \\sum {V}{internal}+\\displaystyle \\sum {V}{external} {Where}\\ \\displaystyle \\sum {V}{internal} & = & {e}{residential}{Y}{residential}+{e}{schools}{Y}{schools}+{e}{unis}{Y}{unis}+{e}{offices}{Y}{offices}+{e}{hospital}{Y}{hospital}+{e}{chemists}{Y}{chemists}+{e}{commercial}{Y}{commercial}+{e}{market}{Y}{market}+{e}{fuel {station}}{Y}{fuel {station}}+{e}{bus {station}}{Y}{bus {station}} {and}\\ \\displaystyle \\sum {V}{external} & = & \\displaystyle \\sum {V}{local {roads}}+{V}{continous {traffic} {flow}}\\end{array}\\end{eqnarray} The research showed that V_total=23,033 car unit/day (internal) + 32,746 car unit/day (external) = 55,779 car unit/day. The trip higher than the road’s capacity

Information sharing model in supporting implementation of e-procurement service: Case of Bandung city

NASA Astrophysics Data System (ADS)

Ramantoko, Gadang; Irawan, Herry

2017-10-01

This research examines the factors influencing the Information Sharing Model in Supporting Implementation of e-Procurement Services: Case of Bandung City in its early maturity stage. The early maturity of information sharing stage was determined using e-Government Maturity Stage Conceptual Framework from Estevez. Bandung City e-Procurement Information Sharing system was categorized at stage 1 in Estevez' model where the concern was mainly on assessing the benefit and risk of implementing the system. The Authors were using DeLone & McLean (D&M) Information System Success model to study benefit and risk of implementing the system in Bandung city. The model was then empirically tested by employing survey data that was collected from the available 40 listed supplier firms. D&M's model adjusted by Klischewski's description was introducing Information Quality, System Quality, and Service Quality as independent variable; Usability and User Satisfaction as intermediate dependent variable; and Perceived Net Benefit as final dependent variable. The findings suggested that, all of the predictors in D&M's model significantly influenced the net perceived benefit of implementing the e-Procurement system in the early maturity stage. The theoretical contribution of this research suggested that D&M's model might find useful in modeling complex information technology successfulness such as the one used in e-Procurement service. This research could also have implications for policy makers (LPSE) and system providers (LKPP) following the introduction of the service. However, the small number of respondent might be considered limitation of the study. The model needs to be further tested using larger number of respondents by involving the population of the firms in extended boundary/municipality area around Bandung.

Investigation of the thermonuclear 18Ne(α,p)21Na reaction rate via resonant elastic scattering of 21Na + p

NASA Astrophysics Data System (ADS)

Zhang, L. Y.; He, J. J.; Parikh, A.; Xu, S. W.; Yamaguchi, H.; Kahl, D.; Kubono, S.; Mohr, P.; Hu, J.; Ma, P.; Chen, S. Z.; Wakabayashi, Y.; Wang, H. W.; Tian, W. D.; Chen, R. F.; Guo, B.; Hashimoto, T.; Togano, Y.; Hayakawa, S.; Teranishi, T.; Iwasa, N.; Yamada, T.; Komatsubara, T.; Zhang, Y. H.; Zhou, X. H.

2014-01-01

The 18Ne(α,p)21Na reaction is thought to be one of the key breakout reactions from the hot CNO cycles to the rp process in type I x-ray bursts. In this work, the resonant properties of the compound nucleus 22Mg have been investigated by measuring the resonant elastic scattering of 21Na + p. An 89-MeV 21Na radioactive beam delivered from the CNS Radioactive Ion Beam Separator bombarded an 8.8 mg/cm2 thick polyethylene (CH2)n target. The 21Na beam intensity was about 2×105 pps, with a purity of about 70% on target. The recoiled protons were measured at the center-of-mass scattering angles of θc.m.≈175.2∘, 152.2∘, and 150.5∘ by three sets of ΔE-E telescopes, respectively. The excitation function was obtained with the thick-target method over energies Ex(22Mg)=5.5-9.2 MeV. In total, 23 states above the proton-threshold in 22Mg were observed, and their resonant parameters were determined via an R-matrix analysis of the excitation functions. We have made several new Jπ assignments and confirmed some tentative assignments made in previous work. The thermonuclear 18Ne(α,p)21Na rate has been recalculated based on our recommended spin-parity assignments. The astrophysical impact of our new rate has been investigated through one-zone postprocessing x-ray burst calculations. We find that the 18Ne(α,p)21Na rate significantly affects the peak nuclear energy generation rate, reaction fluxes, and onset temperature of this breakout reaction in these astrophysical phenomena.

22. INTERIOR OF BUILDING 1606. VIEW TO NORTH. Rocky ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. INTERIOR OF BUILDING 1606. VIEW TO NORTH. - Rocky Mountain Arsenal, Cluster Bomb Assembly-Filling-Storage Building, 3500 feet South of Ninth Avenue; 2870 feet East of D Street, Commerce City, Adams County, CO

Tsunami evacuation mathematical model for the city of Padang

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kusdiantara, R.; Hadianti, R.; Badri Kusuma, M. S.

2012-05-22

Tsunami is a series of wave trains which travels with high speed on the sea surface. This traveling wave is caused by the displacement of a large volume of water after the occurrence of an underwater earthquake or volcano eruptions. The speed of tsunami decreases when it reaches the sea shore along with the increase of its amplitudes. Two large tsunamis had occurred in the last decades in Indonesia with huge casualties and large damages. Indonesian Tsunami Early Warning System has been installed along the west coast of Sumatra. This early warning system will give about 10-15 minutes to evacuatemore » people from high risk regions to the safe areas. Here in this paper, a mathematical model for Tsunami evacuation is presented with the city of Padang as a study case. In the model, the safe areas are chosen from the existing and selected high rise buildings, low risk region with relatively high altitude and (proposed to be built) a flyover ring road. Each gathering points are located in the radius of approximately 1 km from the ring road. The model is formulated as an optimization problem with the total normalized evacuation time as the objective function. The constraints consist of maximum allowable evacuation time in each route, maximum capacity of each safe area, and the number of people to be evacuated. The optimization problem is solved numerically using linear programming method with Matlab. Numerical results are shown for various evacuation scenarios for the city of Padang.« less

Slow [Na+]i dynamics impacts arrhythmogenesis and spiral wave reentry in cardiac myocyte ionic model.

PubMed

Krogh-Madsen, Trine; Christini, David J

2017-09-01

Accumulation of intracellular Na + is gaining recognition as an important regulator of cardiac myocyte electrophysiology. The intracellular Na + concentration can be an important determinant of the cardiac action potential duration, can modulate the tissue-level conduction of excitation waves, and can alter vulnerability to arrhythmias. Mathematical models of cardiac electrophysiology often incorporate a dynamic intracellular Na + concentration, which changes much more slowly than the remaining variables. We investigated the dependence of several arrhythmogenesis-related factors on [Na + ] i in a mathematical model of the human atrial action potential. In cell simulations, we found that [Na + ] i accumulation stabilizes the action potential duration to variations in several conductances and that the slow dynamics of [Na + ] i impacts bifurcations to pro-arrhythmic afterdepolarizations, causing intermittency between different rhythms. In long-lasting tissue simulations of spiral wave reentry, [Na + ] i becomes spatially heterogeneous with a decreased area around the spiral wave rotation center. This heterogeneous region forms a functional anchor, resulting in diminished meandering of the spiral wave. Our findings suggest that slow, physiological, rate-dependent variations in [Na + ] i may play complex roles in cellular and tissue-level cardiac dynamics.

Slow [Na+]i dynamics impacts arrhythmogenesis and spiral wave reentry in cardiac myocyte ionic model

NASA Astrophysics Data System (ADS)

Krogh-Madsen, Trine; Christini, David J.

2017-09-01

Accumulation of intracellular Na+ is gaining recognition as an important regulator of cardiac myocyte electrophysiology. The intracellular Na+ concentration can be an important determinant of the cardiac action potential duration, can modulate the tissue-level conduction of excitation waves, and can alter vulnerability to arrhythmias. Mathematical models of cardiac electrophysiology often incorporate a dynamic intracellular Na+ concentration, which changes much more slowly than the remaining variables. We investigated the dependence of several arrhythmogenesis-related factors on [Na+]i in a mathematical model of the human atrial action potential. In cell simulations, we found that [Na+]i accumulation stabilizes the action potential duration to variations in several conductances and that the slow dynamics of [Na+]i impacts bifurcations to pro-arrhythmic afterdepolarizations, causing intermittency between different rhythms. In long-lasting tissue simulations of spiral wave reentry, [Na+]i becomes spatially heterogeneous with a decreased area around the spiral wave rotation center. This heterogeneous region forms a functional anchor, resulting in diminished meandering of the spiral wave. Our findings suggest that slow, physiological, rate-dependent variations in [Na+]i may play complex roles in cellular and tissue-level cardiac dynamics.

Universal predictability of mobility patterns in cities

PubMed Central

Yan, Xiao-Yong; Zhao, Chen; Fan, Ying; Di, Zengru; Wang, Wen-Xu

2014-01-01

Despite the long history of modelling human mobility, we continue to lack a highly accurate approach with low data requirements for predicting mobility patterns in cities. Here, we present a population-weighted opportunities model without any adjustable parameters to capture the underlying driving force accounting for human mobility patterns at the city scale. We use various mobility data collected from a number of cities with different characteristics to demonstrate the predictive power of our model. We find that insofar as the spatial distribution of population is available, our model offers universal prediction of mobility patterns in good agreement with real observations, including distance distribution, destination travel constraints and flux. By contrast, the models that succeed in modelling mobility patterns in countries are not applicable in cities, which suggests that there is a diversity of human mobility at different spatial scales. Our model has potential applications in many fields relevant to mobility behaviour in cities, without relying on previous mobility measurements. PMID:25232053

Heat-related mortality in a warming climate: projections for 12 U.S. cities.

PubMed

Petkova, Elisaveta P; Bader, Daniel A; Anderson, G Brooke; Horton, Radley M; Knowlton, Kim; Kinney, Patrick L

2014-10-31

Heat is among the deadliest weather-related phenomena in the United States, and the number of heat-related deaths may increase under a changing climate, particularly in urban areas. Regional adaptation planning is unfortunately often limited by the lack of quantitative information on potential future health responses. This study presents an assessment of the future impacts of climate change on heat-related mortality in 12 cities using 16 global climate models, driven by two scenarios of greenhouse gas emissions. Although the magnitude of the projected heat effects was found to differ across time, cities, climate models and greenhouse pollution emissions scenarios, climate change was projected to result in increases in heat-related fatalities over time throughout the 21st century in all of the 12 cities included in this study. The increase was more substantial under the high emission pathway, highlighting the potential benefits to public health of reducing greenhouse gas emissions. Nearly 200,000 heat-related deaths are projected to occur in the 12 cities by the end of the century due to climate warming, over 22,000 of which could be avoided if we follow a low GHG emission pathway. The presented estimates can be of value to local decision makers and stakeholders interested in developing strategies to reduce these impacts and building climate change resilience.

Heat-Related Mortality in a Warming Climate: Projections for 12 U.S. Cities

NASA Technical Reports Server (NTRS)

Petkova, Elisaveta P.; Bader, Daniel A.; Anderson, G. Brooke; Horton, Radley M.; Knowlton, Kim; Kinney, Patrick L.

2014-01-01

Heat is among the deadliest weather-related phenomena in the United States, and the number of heat-related deaths may increase under a changing climate, particularly in urban areas. Regional adaptation planning is unfortunately often limited by the lack of quantitative information on potential future health responses. This study presents an assessment of the future impacts of climate change on heat-related mortality in 12 cities using 16 global climate models, driven by two scenarios of greenhouse gas emissions. Although the magnitude of the projected heat effects was found to differ across time, cities, climate models and greenhouse pollution emissions scenarios, climate change was projected to result in increases in heat-related fatalities over time throughout the 21st century in all of the 12 cities included in this study. The increase was more substantial under the high emission pathway, highlighting the potential benefits to public health of reducing greenhouse gas emissions. Nearly 200,000 heat-related deaths are projected to occur in the 12 cities by the end of the century due to climate warming, over 22,000 of which could be avoided if we follow a low GHG emission pathway. The presented estimates can be of value to local decision makers and stakeholders interested in developing strategies to reduce these impacts and building climate change resilience.

HNM, heliport noise model : version 2.2 user's guide

DOT National Transportation Integrated Search

1994-02-01

The John A. Volpe National Transportation Systems Center (Volpe Center), in support of : the Federal Aviation Administration, Office of Environment and Energy, has developed : Version 2.2 of the Heliport Noise Model (HNM). The HNM is a computer progr...

Space Partitioning for Privacy Enabled 3D City Models

NASA Astrophysics Data System (ADS)

Filippovska, Y.; Wichmann, A.; Kada, M.

2016-10-01

Due to recent technological progress, data capturing and processing of highly detailed (3D) data has become extensive. And despite all prospects of potential uses, data that includes personal living spaces and public buildings can also be considered as a serious intrusion into people's privacy and a threat to security. It becomes especially critical if data is visible by the general public. Thus, a compromise is needed between open access to data and privacy requirements which can be very different for each application. As privacy is a complex and versatile topic, the focus of this work particularly lies on the visualization of 3D urban data sets. For the purpose of privacy enabled visualizations of 3D city models, we propose to partition the (living) spaces into privacy regions, each featuring its own level of anonymity. Within each region, the depicted 2D and 3D geometry and imagery is anonymized with cartographic generalization techniques. The underlying spatial partitioning is realized as a 2D map generated as a straight skeleton of the open space between buildings. The resulting privacy cells are then merged according to the privacy requirements associated with each building to form larger regions, their borderlines smoothed, and transition zones established between privacy regions to have a harmonious visual appearance. It is exemplarily demonstrated how the proposed method generates privacy enabled 3D city models.

Evaluation of the implementation of the directly observed treatment strategy for tuberculosis in a large city.

PubMed

Lavôr, Débora Cristina Brasil da Silva; Pinheiro, Jair Dos Santos; Gonçalves, Maria Jacirema Ferreira

2016-04-01

To assess the degree of implementation of the Directly Observed Treatment, Short-course - DOTS for tuberculosis (TB) in a large city. Assessment of the implementation of the logic model, whose new cases of infectious pulmonary TB were recruited from specialized clinics and followed-up in basic health units. The judgment matrix covering the five components of the DOTS strategy were used. The result of the logic model indicates DOTS was partially implemented. In external, organizational and implementation contexts, the DOTS strategy was partially implemented; and, the effectiveness was not implemented. The partial implementation of the DOTS strategy in the city of Manaus did not reflect in TB control compliance, leading to low effectiveness of the program. Avaliar o grau de implantação da estratégia de tratamento diretamente observado (Directly Observed Treatment, Short-course - DOTS) para tuberculose (TB) em um município de grande porte. Avaliação de implantação por meio de modelo lógico, cujos casos novos de TB pulmonar bacilífera foram recrutados em ambulatórios especializados e acompanhados nas unidades básicas de saúde. Utilizou-se matriz de julgamento que abrange os cinco componentes da estratégia DOTS. O resultado do modelo lógico indica DOTS implantada parcialmente. Nos contextos externo, organizacional e de implantação, a estratégia DOTS está implantada parcialmente; e, na efetividade não está implantada. A implantação parcial da estratégia DOTS, na cidade de Manaus, reflete na não conformidade do controle da TB, levando à baixa efetividade do programa.

Modeling urban flood risk territories for Riga city

NASA Astrophysics Data System (ADS)

Piliksere, A.; Sennikovs, J.; Virbulis, J.; Bethers, U.; Bethers, P.; Valainis, A.

2012-04-01

Riga, the capital of Latvia, is located on River Daugava at the Gulf of Riga. The main flooding risks of Riga city are: (1) storm caused water setup in South part of Gulf of Riga (storm event), (2) water level increase caused by Daugava River discharge maximums (spring snow melting event) and (3) strong rainfall or rapid snow melting in densely populated urban areas. The first two flooding factors were discussed previously (Piliksere et al, 2011). The aims of the study were (1) the identification of the flood risk situations in densely populated areas, (2) the quantification of the flooding scenarios caused by rain and snow melting events of different return periods nowadays, in the near future (2021-2050), far future (2071-2100) taking into account the projections of climate change, (3) estimation of groundwater level for Riga city, (4) the building and calibration of the hydrological mathematical model based on SWMM (EPA, 2004) for the domain potentially vulnerable for rain and snow melt flooding events, (5) the calculation of rain and snow melting flood events with different return periods, (6) mapping the potentially flooded areas on a fine grid. The time series of short term precipitation events during warm time period of year (id est. rain events) were analyzed for 35 year long time period. Annual maxima of precipitation intensity for events with different duration (5 min; 15 min; 1h; 3h; 6h; 12h; 1 day; 2 days; 4 days; 10 days) were calculated. The time series of long term simultaneous precipitation data and observations of the reduction of thickness of snow cover were analyzed for 27 year long time period. Snow thawing periods were detected and maximum of snow melting intensity for events with different intensity (1day; 2 days; 4 days; 7 days; 10 days) were calculated. According to the occurrence probability six scenarios for each event for nowadays, near and far future with return period once in 5, 10, 20, 50, 100 and 200 years were constructed based on

Internally mixed sea salt, soot, and sulfates at Macao, a coastal city in South China.

PubMed

Li, Weijun; Shao, Longyi; Shen, Rongrong; Yang, Shusheng; Wang, Zhishi; Tang, Uwa

2011-11-01

Direct observation of the mixing state of aerosol particles in a coastal urban city is critical to understand atmospheric processing and hygroscopic growth in humid air. Morphology, composition, and mixing state of individual aerosol particles from Macao, located south of the Pearl River Delta (PRD) and 100 km west of Hong Kong, were investigated using scanning electron microscopy (SEM) and transmission electron microscopy coupled with energy-dispersive X-ray spectrometry (TEM/EDX). SEM images show that soot and roughly spherical particles are prevalent in the samples. Based on the compositions of individual aerosol particles, aerosol particles with roughly spherical shape are classified into coarse Na-rich and fine S-rich particles. TEM/EDX indicates that each Na-rich particle consists of a Na-S core and NaNO3 shell. Even in the absence of heavy pollution, the marine sea salt particles were completely depleted in chloride, and Na-related sulfates and nitrates were enriched in Macao air. The reason could be that SO2 from the polluted PRD and ships in the South China Sea and NO2 from vehicles in the city sped up the chlorine depletion in sea salt through heterogeneous reactions. Fresh soot particles from vehicular emissions mainly occur near curbside. However, there are many aged soot particles in the sampling site surrounded by main roads 200 to 400 m away, suggesting that the fresh soot likely underwent a quick aging. Overall, secondary nitrates and sulfates internally mixed with soot and sea salt particles can totally change their surface hygroscopicity in coastal cities.

Virtual Modeling for Cities of the Future. State-Of Art and Virtual Modeling for Cities of the Future. State-Of Art AN

NASA Astrophysics Data System (ADS)

Valencia, J.; Muñoz-Nieto, A.; Rodriguez-Gonzalvez, P.

2015-02-01

3D virtual modeling, visualization, dissemination and management of urban areas is one of the most exciting challenges that must face geomatics in the coming years. This paper aims to review, compare and analyze the new technologies, policies and software tools that are in progress to manage urban 3D information. It is assumed that the third dimension increases the quality of the model provided, allowing new approaches to urban planning, conservation and management of architectural and archaeological areas. Despite the fact that displaying 3D urban environments is an issue nowadays solved, there are some challenges to be faced by geomatics in the coming future. Displaying georeferenced linked information would be considered the first challenge. Another challenge to face is to improve the technical requirements if this georeferenced information must be shown in real time. Are there available software tools ready for this challenge? Are they useful to provide services required in smart cities? Throughout this paper, many practical examples that require 3D georeferenced information and linked data will be shown. Computer advances related to 3D spatial databases and software that are being developed to convert rendering virtual environment to a new enriched environment with linked information will be also analyzed. Finally, different standards that Open Geospatial Consortium has assumed and developed regarding the three-dimensional geographic information will be reviewed. Particular emphasis will be devoted on KML, LandXML, CityGML and the new IndoorGML.

Assessing FAÇADE Visibility in 3d City Models for City Marketing

NASA Astrophysics Data System (ADS)

Albrecht, F.; Moser, J.; Hijazi, I.

2013-08-01

In city marketing, different applications require the evaluation of the visual impression of displays in the urban environment on people that visit the city. Therefore, this research focuses on the way how visual displays on façades for movie performances are perceived during a cultural event triggered by city marketing. We describe the different visibility analysis methods that are applicable to the analysis of façades. The methods advanced from the domains of Geographic Information Science, architecture and computer graphics. A detailed scenario is described in order to perform a requirements analysis for identifying the requirements to visibility information. This visibility information needs to describe the visual perception of displays on façades adequately. The requirements are compared to the visibility information that can be provided by the visibility methods. A discussion of the comparison summarizes the advantages and disadvantages of existing visibility analysis methods for describing the visibility of façades. The results show that part of the researched approaches is able to support the requirements to visibility information. But they also show that for a complete support of the entire analysis workflow, there remain unsolved workflow integration issues.

Lunar regolith dynamics based on analysis of the cosmogenic radionuclides Na-22, Al-26, and Mn-53

NASA Technical Reports Server (NTRS)

Fruchter, J. S.; Rancitelli, L. A.; Laul, J. C.; Perkins, R. W.

1977-01-01

Depth profiles of Na-22 and Al-26 in the upper portions of five lunar cores are analyzed. From the analyses, it is concluded that the natural gardening processes on the lunar surface result in mixing of the regolith to a depth of 2-3 cm over a time period which is short compared with the half-life of Al-26 (0.73 m.y.). It is also concluded that the rotary drill processes which were used to obtain the deep drill samples generally resulted in loss and/or mixing of the upper portions of the cores. In contrast, the near-surface regions of the drive tube cores appear to have a well-preserved stratigraphy. Analysis of Mn-53 in samples of six lunar rocks helps substantiate the accuracy of age date estimates by other means, and provides definite information that the total lunar surface exposure of two of these rocks has occurred during a single surface event which continued to their collection.

A Multilayer Naïve Bayes Model for Analyzing User's Retweeting Sentiment Tendency.

PubMed

Wang, Mengmeng; Zuo, Wanli; Wang, Ying

2015-01-01

Today microblogging has increasingly become a means of information diffusion via user's retweeting behavior. Since retweeting content, as context information of microblogging, is an understanding of microblogging, hence, user's retweeting sentiment tendency analysis has gradually become a hot research topic. Targeted at online microblogging, a dynamic social network, we investigate how to exploit dynamic retweeting sentiment features in retweeting sentiment tendency analysis. On the basis of time series of user's network structure information and published text information, we first model dynamic retweeting sentiment features. Then we build Naïve Bayes models from profile-, relationship-, and emotion-based dimensions, respectively. Finally, we build a multilayer Naïve Bayes model based on multidimensional Naïve Bayes models to analyze user's retweeting sentiment tendency towards a microblog. Experiments on real-world dataset demonstrate the effectiveness of the proposed framework. Further experiments are conducted to understand the importance of dynamic retweeting sentiment features and temporal information in retweeting sentiment tendency analysis. What is more, we provide a new train of thought for retweeting sentiment tendency analysis in dynamic social networks.

The city model as a tool for participatory urban planning - a case study: The Bilotti open air museum of Cosenza

NASA Astrophysics Data System (ADS)

Artese, S.

2014-05-01

The paper describes the implementation of the 3D city model of the pedestrian area of Cosenza, which in recent years has become the Bilotti Open Air Museum (MAB). For this purpose were used both the data available (regional technical map, city maps, orthophotos) and acquired through several surveys of buildings and "Corso Mazzini" street (photos, topographic measurements, laser scanner point clouds). In addition to the urban scale model, the survey of the statues of the MAB was carried out. By means of data processing, the models of the same statues have been created, that can be used as objects within the city model. The 3D model of the MAB open air museum has been used to implement a Web-GIS allowing the citizen's participation, understanding and suggestions. The 3D city model is intended as a new tool for urban planning, therefore it has been used both for representing the current situation of the MAB and for design purposes, by acknowledging suggestions regarding a possible different location of the statues and a new way to enjoy the museum.

Reasoning the causality of city sprawl, traffic congestion, and green land disappearance in Taiwan using the CLD model.

PubMed

Chen, Mei-Chih; Chang, Kaowen

2014-11-06

Many city governments choose to supply more developable land and transportation infrastructure with the hope of attracting people and businesses to their cities. However, like those in Taiwan, major cities worldwide suffer from traffic congestion. This study applies the system thinking logic of the causal loops diagram (CLD) model in the System Dynamics (SD) approach to analyze the issue of traffic congestion and other issues related to roads and land development in Taiwan's cities. Comparing the characteristics of development trends with yearbook data for 2002 to 2013 for all of Taiwan's cities, this study explores the developing phenomenon of unlimited city sprawl and identifies the cause and effect relationships in the characteristics of development trends in traffic congestion, high-density population aggregation in cities, land development, and green land disappearance resulting from city sprawl. This study provides conclusions for Taiwan's cities' sustainability and development (S&D). When developing S&D policies, during decision making processes concerning city planning and land use management, governments should think with a holistic view of carrying capacity with the assistance of system thinking to clarify the prejudices in favor of the unlimited developing phenomena resulting from city sprawl.

Older adults abuse in three Brazilian cities.

PubMed

Rodrigues, Rosalina Aparecida Partezani; Monteiro, Edilene Araújo; Santos, Ana Maria Ribeiro Dos; Pontes, Maria de Lourdes de Farias; Fhon, Jack Roberto Silva; Bolina, Alisson Fernandes; Seredynskyj, Fernanda Laporti; Almeida, Vanessa Costa; Giacomini, Suelen Borelli Lima; Defina, Giovanna Partezani Cardoso; Silva, Luipa Michele

2017-01-01

To analyze the police reports filed by older adults who suffered abuse in order to identify the socio-demographic characteristics of victims and aggressors, type of violence, location, as well as to compare rates in three Brazilian cities in the period from 2009 to 2013. Ecological study, in which 2,612 police reports registered in Police Stations were analyzed. An instrument was used to obtain data from the victim, the aggressor and the type of violence. Psychological abuse predominated and most cases occurred in the older adults own home. In the cities of Ribeirão Preto and João Pessoa, the older adults presented similar rates for both gender. Regarding the standardized rates, in João Pessoa, there was a rise of this type of abuse in the two first years, and later there was a certain stability. In the city of Teresina, there was an increase, also observed in the city of Ribeirão Preto in the three first years, followed by a decrease. Older adults abuse is a cultural phenomenon difficult to be reported by them, since it occurs in the family context. Analisar os boletins de ocorrência registrados por idosos que sofreram violência, a fim de identificar características sociodemográficas das vítimas e dos agressores, tipo de violência, local, bem como comparar as taxas em três municípios brasileiros no período de 2009 a 2013. Estudo ecológico, em que foram analisados 2.612 boletins de ocorrência registrados em Delegacias do Idoso. Utilizou-se um instrumento para obter dados da vítima, do agressor e tipo de violência. Predominou a violência psicológica, na maioria dos casos na própria residência do idoso. Em Ribeirão Preto e João Pessoa, os idosos mais jovens apresentaram taxas semelhantes entre ambos os sexos. Na comparação das taxas padronizadas, em João Pessoa, houve ascensão deste tipo de violência nos dois primeiros anos, e, posteriormente, certa estabilidade. Em Teresina, houve ascensão, também observada em Ribeirão Preto nos tr

The Poughkeepsie Survey. A Report on Employment and Unemployment in a "Target Area" under the Model Cities Program.

ERIC Educational Resources Information Center

Kuper, Irvin, Ed.

Located in the heart of the Mid-Hudson area, Poughkeepsie is in one of the fastest growing regions of New York State, but the city itself has grown very little in the last five decades. The local Model Cities agency has created a target area which includes most of the older part of the city. In July 1967, the population was 35,970. A total of…

How to Pinpoint Energy-Inefficient Buildings? AN Approach Based on the 3d City Model of Vienna

NASA Astrophysics Data System (ADS)

Skarbal, B.; Peters-Anders, J.; Faizan Malik, A.; Agugiaro, G.

2017-09-01

This paper describes a methodology to assess the energy performance of residential buildings starting from the semantic 3D city model of Vienna. Space heating, domestic hot water and electricity demand are taken into account. The paper deals with aspects related to urban data modelling, with particular attention to the energy-related topics, and with issues related to interactive data exploration/visualisation and management from a plugin-free web-browser, e.g. based on Cesium, a WebGL virtual globe and map engine. While providing references to existing previous works, only some general and introductory information is given about the data collection, harmonisation and integration process necessary to create the CityGML-based 3D city model, which serves as the central information hub for the different applications developed and described more in detail in this paper. The work aims, among the rest, at developing urban decision making and operational optimisation software tools to minimise non-renewable energy use in cities. The results obtained so far, as well as some comments about their quality and limitations, are presented, together with the discussion regarding the next steps and some planned improvements.

Hazardous Waste Cleanup: CWM Chemical Services, LLC in Model City, New York

EPA Pesticide Factsheets

The CWM facility is located at 1550 Balmer Road in northwestern New York State in Model City (the towns of Lewiston and Porter.) The property has been operated as a hazardous waste disposal area since 1972. Prior to 1972, the site property was used for a

Na/Ca Ratio in Large Benthic Foraminifera as a Novel Proxy for Past Ocean Calcium

NASA Astrophysics Data System (ADS)

Rosenthal, Y.; Hauzer, H.; Evans, D.; Erez, J.

2017-12-01

Culture experiments with Operculina ammonoides (a large symbiont bearing benthic foraminifer and an extant relative of the Eocene Nummulites) were carried out varying seawater [Ca], temperature and salinity. The main results of these experiments are: 1. Na/Ca in these foraminifera shells varies with the Na/Ca ratio in the seawater 2. Na/Ca shows small, non-systematic variations with temperature (22-28 ºC) that are within our analytical precision. 3. Na/Ca in the shells show very low changes, increasing linearly with salinity. The sensitivity to salinity is very low compared to that caused by changes of Na/Ca in seawater. Over the seawater experimental range of Na/Ca (10-18 mM), a change of 5 ppt salinity induced a slight Na/Ca increase comparable to the analytical error for Na, or that caused by temperature. Initial reconstructions of seawater [Ca], based on these calibrations, generally agree well with previous models and reconstructions confirming that seawater [Ca] concentrations were substantially higher during the early-mid Cenozoic than today.

Spatio-Temporal Synchrony of Influenza in Cities across Israel: The “Israel Is One City” Hypothesis

PubMed Central

Barnea, Oren; Huppert, Amit; Katriel, Guy; Stone, Lewi

2014-01-01

We analysed an 11-year dataset (1998–2009) of Influenza-Like Illness (ILI) that was based on surveillance of ∽23% of Israel's population. We examined whether the level of synchrony of ILI epidemics in Israel's 12 largest cities is high enough to view Israel as a single epidemiological unit. Two methods were developed to assess the synchrony: (1) City-specific attack rates were fitted to a simple model in order to estimate the temporal differences in attack rates and spatial differences in reporting rates of ILI. The model showed good fit to the data (R2  =  0.76) and revealed considerable differences in reporting rates of ILI in different cities (up to a factor of 2.2). (2) A statistical test was developed to examine the null hypothesis (H0) that ILI incidence curves in two cities are essentially identical, and was tested using ILI data. Upon examining all possible pairs of incidence curves, 77.4% of pairs were found not to be different (H0 was not rejected). It was concluded that all cities generally have the same attack rate and follow the same epidemic curve each season, although the attack rate changes from season to season, providing strong support for the “Israel is one city” hypothesis. The cities which were the most out of synchronization were Bnei Brak, Beersheba and Haifa, the latter two being geographically remote from all other cities in the dataset and the former geographically very close to several other cities but socially separate due to being populated almost exclusively by ultra-orthodox Jews. Further evidence of assortative mixing of the ultra-orthodox population can be found in the 2001–2002 season, when ultra-orthodox cities and neighborhoods showed distinctly different incidence curves compared to the general population. PMID:24622820

75 FR 11580 - Florida Power Corporation, City of Alachua, City of Bushnell, City of Gainesville, City of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-11

...- 0096] Florida Power Corporation, City of Alachua, City of Bushnell, City of Gainesville, City of Kissimmee, City of Leesburg, City of New Smyrna Beach and Utilities Commission, City of New Smyrna Beach, City of Ocala, Orlando Utilities Commission and City of Orlando, Seminole Electric Cooperative, Inc...

Ehimeite, NaCa2Mg4CrSi6Al2O22(OH)2: The first Cr-dominant amphibole from the Akaishi Mine, Higashi-Akaishi Mountain, Ehime Prefecture, Japan

NASA Astrophysics Data System (ADS)

Nishio-Hamane, Daisuke; Ohnishi, Masayuki; Minakawa, Tetsuo; Yamaura, Jun-Ichi; Saito, Shohei; Kadota, Ryo

The first Cr-dominant amphibole, ehimeite, ideally NaCa2Mg4CrSi6Al2O22(OH)2, has been found in a chromitite deposit in the Akaishi Mine, Higashi-Akaishi Mountain, Ehime Prefecture, Japan. Ehimeite occurs as prismatic crystals of up to 1.5 cm in length and 0.5 cm in width and is found in association with chromite, kämmererite (Cr-rich clinochlore), Cr-poor clinochlore, phlogopite, and uvarovite. It is transparent, emerald green to pale green in color with pale green streaks, and has a vitreous luster. Optically, it is biaxial positive with α = 1.644(2), β = 1.647(2), γ = 1.659(2), and 2Vcalc. = 53°. It has a Mohs’ hardness of 6 and densities of 3.08(3) g/cm3 (measured using heavy liquids) and 3.121 g/cm3 (calculated from powder diffraction data and the empirical formula). The empirical formula is (Na0.88K0.07)Σ0.95(Ca1.89Na0.02Mg0.09)Σ2.00(Mg4.03Cr0.62Al0.19Fe3+0.07Fe2+0.07Ti0.03)Σ5.00(Si6.14Al1.86)Σ8.00O22(OH)2 on the basis of O = 22 and OH = 2, and ehimeite mainly forms a solid solution, NaCa2Mg4(Cr, Al)Si6Al2O22(OH)2, with pargasite. It has a monoclinic unit cell with a = 9.9176(14) Å, b = 18.0009(12) Å, c = 5.2850(7) Å, β = 105.400(7)°, V = 909.6 (17) Å3, and Z = 2, and it belongs to the space group C2/m, as refined from powder XRD data. The eight strongest lines in the powder XRD pattern [d (Å), I/I0, hkl] are (3.370, 58, 150), (2.932, 43, 221), (2.697, 81, 151), (2.585, 50, 061), (2.546, 100, 202), (2.346, 42, 351), (2.156, 35, 261), and (1.514, 55, 263). The crystal structure has been refined to R1 = 0.0488 using single-crystal XRD data. It has been concluded that ehimeite in the Akaishi Mine was formed by the reaction of chromitite and the metamorphic fluid in the retrograde stage of serpentinization during the Sanbagawa metamorphism.

Social Studies: Cities in Crisis.

ERIC Educational Resources Information Center

Faulkner, Brenda F.

This elective quinmester program for grades 10 through 12 focuses upon the study of urban problems. Students analyze city problems taking into consideration ecology, city planning, model cities, and other factors in an attempt to provide creative solutions. The course is arranged into seven sections. Student activities are to: 1) discuss the…

The Solar City Daegu 2050 Project: Visions for a Sustainable City

ERIC Educational Resources Information Center

Kim, Jong-dall; Han, Dong-hi; Na, Jung-gyu

2006-01-01

The Solar City Daegu 2050 Project (SCD 2050) represents a comprehensive model for shaping the future of this city of 2.5 million residents with a mixed industrial and services economic base. Its specific aims are as follows: realization of a carbon footprint consistent with standards of global sustainability and equity; the development of a…

City of Waukee, Iowa - Clean Water Act Public Notice

EPA Pesticide Factsheets

The EPA is providing notice of a proposed Administrative Penalty Assessment against City of Waukee, Iowa, for alleged violations at the Westown Parkway and R22 Intersection Improvement Project construction site in Waukee, Iowa 50263.

City scale pollen concentration variability

NASA Astrophysics Data System (ADS)

van der Molen, Michiel; van Vliet, Arnold; Krol, Maarten

2016-04-01

Pollen are emitted in the atmosphere both in the country-side and in cities. Yet the majority of the population is exposed to pollen in cities. Allergic reactions may be induced by short-term exposure to pollen. This raises the question how variable pollen concentration in cities are in temporally and spatially, and how much of the pollen in cities are actually produced in the urban region itself. We built a high resolution (1 × 1 km) pollen dispersion model based on WRF-Chem to study a city's pollen budget and the spatial and temporal variability in concentration. It shows that the concentrations are highly variable, as a result of source distribution, wind direction and boundary layer mixing, as well as the release rate as a function of temperature, turbulence intensity and humidity. Hay Fever Forecasts based on such high resolution emission and physical dispersion modelling surpass traditional hay fever warning methods based on temperature sum methods. The model gives new insights in concentration variability, personal and community level exposure and prevention. The model will be developped into a new forecast tool to serve allergic people to minimize their exposure and reduce nuisance, coast of medication and sick leave. This is an innovative approach in hay fever warning systems.

Modeling a model: Mouse genetics, 22q11.2 Deletion Syndrome, and disorders of cortical circuit development

PubMed Central

Meechan, Daniel W.; Maynard, Thomas M.; Fernandez, Alejandra; Karpinski, Beverly A.; Rothblat, Lawrence A.; LaMantia, Anthony S.

2015-01-01

Understanding the developmental etiology of autistic spectrum disorders, attention deficit/hyperactivity disorder and schizophrenia remains a major challenge for establishing new diagnostic and therapeutic approaches to these common, difficult-to-treat diseases that compromise neural circuits in the cerebral cortex. One aspect of this challenge is the breadth and overlap of ASD, ADHD, and SCZ deficits; another is the complexity of mutations associated with each, and a third is the difficulty of analyzing disrupted development in at-risk or affected human fetuses. The identification of distinct genetic syndromes that include behavioral deficits similar to those in ASD, ADHC and SCZ provides a critical starting point for meeting this challenge. We summarize clinical and behavioral impairments in children and adults with one such genetic syndrome, the 22q11.2 Deletion Syndrome, routinely called 22q11DS, caused by micro-deletions of between 1.5 and 3.0 MB on human chromosome 22. Among many syndromic features, including cardiovascular and craniofacial anomalies, 22q11DS patients have a high incidence of brain structural, functional, and behavioral deficits that reflect cerebral cortical dysfunction and fall within the spectrum that defines ASD, ADHD, and SCZ. We show that developmental pathogenesis underlying this apparent genetic “model” syndrome in patients can be defined and analyzed mechanistically using genomically accurate mouse models of the deletion that causes 22q11DS. We conclude that “modeling a model”, in this case 22q11DS as a model for idiopathic ASD, ADHD and SCZ, as well as other behavioral disorders like anxiety frequently seen in 22q11DS patients, in genetically engineered mice provides a foundation for understanding the causes and improving diagnosis and therapy for these disorders of cortical circuit development. PMID:25866365

Hypothesized diprotomeric enzyme complex supported by stochastic modelling of palytoxin-induced Na/K pump channels

PubMed Central

Vilallonga, Gabriel D.; de Almeida, Antônio-Carlos G.; Ribeiro, Kelison T.; Campos, Sergio V. A.

2018-01-01

The sodium–potassium pump (Na+/K+ pump) is crucial for cell physiology. Despite great advances in the understanding of this ionic pumping system, its mechanism is not completely understood. We propose the use of a statistical model checker to investigate palytoxin (PTX)-induced Na+/K+ pump channels. We modelled a system of reactions representing transitions between the conformational substates of the channel with parameters, concentrations of the substates and reaction rates extracted from simulations reported in the literature, based on electrophysiological recordings in a whole-cell configuration. The model was implemented using the UPPAAL-SMC platform. Comparing simulations and probabilistic queries from stochastic system semantics with experimental data, it was possible to propose additional reactions to reproduce the single-channel dynamic. The probabilistic analyses and simulations suggest that the PTX-induced Na+/K+ pump channel functions as a diprotomeric complex in which protein–protein interactions increase the affinity of the Na+/K+ pump for PTX. PMID:29657808

Sodium-22-radiolabeled silica nanoparticles as new radiotracer for biomedical applications: in vivo positron emission tomography imaging, biodistribution, and biocompatibility

PubMed Central

Al Faraj, Achraf; Alotaibi, Basem; Shaik, Abjal Pasha; Shamma, Khaled Z; Al Jammaz, Ibrahim; Gerl, Jürgen

2015-01-01

Despite their advantageous chemical properties for nuclear imaging, radioactive sodium-22 (22Na) tracers have been excluded for biomedical applications because of their extremely long lifetime. In the current study, we proposed, for the first time, the use of 22Na radiotracers for pre-clinical applications by efficiently loading with silica nanoparticles (SiNPs) and thus offering a new life for this radiotracer. Crown-ether-conjugated SiNPs (300 nm; −0.18±0.1 mV) were successfully loaded with 22Na with a loading efficacy of 98.1%±1.4%. Noninvasive positron emission tomography imaging revealed a transient accumulation of 22Na-loaded SiNPs in the liver and to a lower extent in the spleen, kidneys, and lung. However, the signal gradually decreased in a time-dependent manner to become not detectable starting from 2 weeks postinjection. These observations were confirmed ex vivo by quantifying 22Na radioactivity using γ-counter and silicon content using inductively coupled plasma-mass spectrometry in the blood and the different organs of interest. Quantification of Si content in the urine and feces revealed that SiNPs accumulated in the organs were cleared from the body within a period of 2 weeks and completely in 1 month. Biocompatibility evaluations performed during the 1-month follow-up study to assess the possibility of synthesized nanocarriers to induce oxidative stress or DNA damage confirmed their safety for pre-clinical applications. 22Na-loaded nanocarriers can thus provide an innovative diagnostic agent allowing ultra-sensitive positron emission tomography imaging. On the other hand, with its long lifetime, onsite generators or cyclotrons will not be required as 22Na can be easily stored in the nuclear medicine department and be used on-demand. PMID:26504381

Reasoning the Causality of City Sprawl, Traffic Congestion, and Green Land Disappearance in Taiwan Using the CLD Model

PubMed Central

Chen, Mei-Chih; Chang, Kaowen

2014-01-01

Many city governments choose to supply more developable land and transportation infrastructure with the hope of attracting people and businesses to their cities. However, like those in Taiwan, major cities worldwide suffer from traffic congestion. This study applies the system thinking logic of the causal loops diagram (CLD) model in the System Dynamics (SD) approach to analyze the issue of traffic congestion and other issues related to roads and land development in Taiwan’s cities. Comparing the characteristics of development trends with yearbook data for 2002 to 2013 for all of Taiwan’s cities, this study explores the developing phenomenon of unlimited city sprawl and identifies the cause and effect relationships in the characteristics of development trends in traffic congestion, high-density population aggregation in cities, land development, and green land disappearance resulting from city sprawl. This study provides conclusions for Taiwan’s cities’ sustainability and development (S&D). When developing S&D policies, during decision making processes concerning city planning and land use management, governments should think with a holistic view of carrying capacity with the assistance of system thinking to clarify the prejudices in favor of the unlimited developing phenomena resulting from city sprawl. PMID:25383609

New-concept Batteries Based on Aqueous Li+/Na+ Mixed-ion Electrolytes

PubMed Central

Chen, Liang; Gu, Qingwen; Zhou, Xufeng; Lee, Saixi; Xia, Yonggao; Liu, Zhaoping

2013-01-01

Rechargeable batteries made from low-cost and abundant materials operating in safe aqueous electrolytes are attractive for large-scale energy storage. Sodium-ion battery is considered as a potential alternative of current lithium-ion battery. As sodium-intercalation compounds suitable for aqueous batteries are limited, we adopt a novel concept of Li+/Na+ mixed-ion electrolytes to create two batteries (LiMn2O4/Na0.22MnO2 and Na0.44MnO2/TiP2O7), which relies on two electrochemical processes. One involves Li+ insertion/extraction reaction, and the other mainly relates to Na+ extraction/insertion reaction. Two batteries exhibit specific energy of 17 Wh kg−1 and 25 Wh kg−1 based on the total weight of active electrode materials, respectively. As well, aqueous LiMn2O4/Na0.22MnO2 battery is capable of separating Li+ and Na+ due to its specific mechanism unlike the traditional “rocking-chair” lithium-ion batteries. Hence, the Li+/Na+ mixed-ion batteries offer promising applications in energy storage and Li+/Na+ separation. PMID:23736113

Development of an Austenitization Kinetics Model for 22MnB5 Steel

NASA Astrophysics Data System (ADS)

Di Ciano, M.; Field, N.; Wells, M. A.; Daun, K. J.

2018-03-01

This paper presents a first-order austenitization kinetics model for 22MnB5 steel, commonly used in hot forming die quenching. Model parameters are derived from constant heating rate dilatometry measurements. Vickers hardness measurements made on coupons that were quenched at intermediate stages of the process were used to verify the model, and the Ac 1 and Ac 3 temperatures inferred from dilatometry are consistent with correlations found in the literature. The austenitization model was extended to consider non-constant heating rates typical of industrial furnaces and again showed reasonable agreement between predictions and measurements. Finally, the model is used to predict latent heat evolution during industrial heating and is shown to be consistent with values inferred from thermocouple measurements of furnace-heated 22MnB5 coupons reported in the literature.

Evapotranspiration Within the Groundwater Model Domain of the Tuba City, Arizona, Disposal Site Interim Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The revised groundwater model includes estimates of evapotranspiration (ET). The types of vegetation and the influences of ET on groundwater hydrology vary within the model domain. Some plant species within the model domain, classified as phreatophytes, survive by extracting groundwater. ET within these plant communities can result in a net discharge of groundwater if ET exceeds precipitation. Other upland desert plants within the model domain survive on meteoric water, potentially limiting groundwater recharge if ET is equivalent to precipitation. For all plant communities within the model domain, excessive livestock grazing or other disturbances can tip the balance to a netmore » groundwater recharge. This task characterized and mapped vegetation within the groundwater model domain at the Tuba City, Arizona, Site, and then applied a remote sensing algorithm to estimate ET for each vegetation type. The task was designed to address five objectives: 1. Characterize and delineate different vegetation or ET zones within the groundwater model domain, focusing on the separation of plant communities with phreatophytes that survive by tapping groundwater and upland plant communities that are dependent on precipitation. 2. Refine a remote sensing method, developed to estimate ET at the Monument Valley site, for application at the Tuba City site. 3. Estimate recent seasonal and annual ET for all vegetation zones, separating phreatophytic and upland plant communities within the Tuba City groundwater model domain. 4. For selected vegetation zones, estimate ET that might be achieved given a scenario of limited livestock grazing. 5. Analyze uncertainty of ET estimates for each vegetation zone and for the entire groundwater model domain.« less

City Planning Unit: Grade 6.

ERIC Educational Resources Information Center

Dalton, William Edward

Described is a project designed to make government lessons and economics more appealing to sixth-grade students by having them set up and run a model city. General preparation procedures and set-up of the project, specific lesson plans, additional activities, and project evaluation are examined. An actual 3-dimensional model city was set up on…

A sustainable city implantation for Vienna, Austria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levine, R.S.; Radmard, T.; Dumreicher, H.

1995-11-01

This paper presents a prototype of the Sustainable City Implantation of the future, which the city of Vienna, Austria is interested in considering as a solution to a long standing urban problem. Developed conceptually through numerous architectural design studio projects and field studies the Sustainable City Implantation is inspired by the historic medieval Italian hilltown. This city-as-a-hill prototype, rendered through sophisticated and flexible computer models, offers the promise of overcoming many of the puzzles and conundrums plaguing urban designers and social ecologists in their efforts to find the proper form and scale for charting the pathway to sustainability in naturemore » and the built environment. The new holistic, people centered, urban model has been developed to be able to synthesize new urban concepts with technological means to develop humane, sustainable cities. This preliminary study develops and verifies this model together with its process for a significant urban site in the city of Vienna.« less

Caries-Preventive Effect of NaF, NaF plus TCP, NaF plus CPP-ACP, and SDF Varnishes on Sound Dentin and Artificial Dentin Caries in vitro.

PubMed

Wierichs, Richard J; Stausberg, Sabrina; Lausch, Julian; Meyer-Lueckel, Hendrik; Esteves-Oliveira, Marcella

2018-01-01

The aim of this study was to compare the caries-preventive effect of different fluoride varnishes on sound dentin as well as on artificial dentin caries-like lesions. Bovine dentin specimens (n = 220) with one sound surface (ST) and one artificial caries lesion (DT) were prepared and randomly allocated to 11 groups. The interventions before pH cycling were as follows: application of a varnish containing NaF (22,600 ppm F-; Duraphat [NaF0/NaF1]), NaF plus tricalcium phosphate (22,600 ppm F-; Clinpro White Varnish Mint [TCP0/TCP1]), NaF plus casein phosphopeptide-stabilized amorphous calcium phosphate complexes (CPP-ACP; 22,600 ppm F-; MI Varnish [CPP0/CPP1]), or silver diamine fluoride (SDF; 35,400 ppm F-; Cariestop 30% [SDF0/SDF1]) and no intervention (NNB/N0/N1). During pH cycling (14 days, 6 × 120 min demineralization/day) half of the specimens in each group were brushed (10 s; 2 times/day) with either fluoride-free ("0"; e.g., TCP0) or 1,100 ppm F- ("1"; e.g., TCP1) dentifrice slurry. In another subgroup, the specimens were pH cycled but not brushed (NNB). Differences in integrated mineral loss (ΔΔZ), lesion depth (ΔLD), and colorimetric values (ΔΔE) were calculated between the values after initial demineralization and those after pH cycling, using transversal microradiography and photographic images. After pH cycling, no discoloration could be observed. Furthermore, NNB, N0, and N1 showed significantly increased ΔZDT/LDDT and ΔZST/LDST values, indicating further demineralization. In contrast, CPP0, CPP1, SDF0, and SDF1 showed significantly decreased ΔZDT/LDDT values, indicating remineralization (p ≤ 0.004; paired t test). CPP0, CPP1, SDF0, and SDF1 showed significantly higher changes in ΔΔZDT/ΔLDDT and ΔΔZST/ΔLDST than NNB, N0, and N1 (p < 0.001; Bonferroni post hoc test). In conclusion, under the conditions chosen, all fluoride varnishes prevented further demineralization. However, only NaF plus CPP-ACP and SDF could remineralize artificial

17. CABLE CAR #22, VIEW SHOWING CAR ROUNDING CORNER IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. CABLE CAR #22, VIEW SHOWING CAR ROUNDING CORNER IN LOADING AREA NEXT TO CAR DUMP AND CAR DUMP BUILDING - Pennsylvania Railroad, Canton Coal Pier, Clinton Street at Keith Avenue (Canton area), Baltimore, Independent City, MD

Characterizing the relationship between temperature and mortality in tropical and subtropical cities: a distributed lag non-linear model analysis in Hue, Viet Nam, 2009-2013.

PubMed

Dang, Tran Ngoc; Seposo, Xerxes T; Duc, Nguyen Huu Chau; Thang, Tran Binh; An, Do Dang; Hang, Lai Thi Minh; Long, Tran Thanh; Loan, Bui Thi Hong; Honda, Yasushi

2016-01-01

The relationship between temperature and mortality has been found to be U-, V-, or J-shaped in developed temperate countries; however, in developing tropical/subtropical cities, it remains unclear. Our goal was to investigate the relationship between temperature and mortality in Hue, a subtropical city in Viet Nam. We collected daily mortality data from the Vietnamese A6 mortality reporting system for 6,214 deceased persons between 2009 and 2013. A distributed lag non-linear model was used to examine the temperature effects on all-cause and cause-specific mortality by assuming negative binomial distribution for count data. We developed an objective-oriented model selection with four steps following the Akaike information criterion (AIC) rule (i.e. a smaller AIC value indicates a better model). High temperature-related mortality was more strongly associated with short lags, whereas low temperature-related mortality was more strongly associated with long lags. The low temperatures increased risk in all-category mortality compared to high temperatures. We observed elevated temperature-mortality risk in vulnerable groups: elderly people (high temperature effect, relative risk [RR]=1.42, 95% confidence interval [CI]=1.11-1.83; low temperature effect, RR=2.0, 95% CI=1.13-3.52), females (low temperature effect, RR=2.19, 95% CI=1.14-4.21), people with respiratory disease (high temperature effect, RR=2.45, 95% CI=0.91-6.63), and those with cardiovascular disease (high temperature effect, RR=1.6, 95% CI=1.15-2.22; low temperature effect, RR=1.99, 95% CI=0.92-4.28). In Hue, the temperature significantly increased the risk of mortality, especially in vulnerable groups (i.e. elderly, female, people with respiratory and cardiovascular diseases). These findings may provide a foundation for developing adequate policies to address the effects of temperature on health in Hue City.

Modeling the impact of sea-spray on particle concentrations in a coastal city.

PubMed

Pryor, S C; Barthelmie, R J; Schoof, J T; Binkowski, F S; Delle Monache, L; Stull, R

2008-02-25

With the worlds population becoming increasingly focused on coastal locations there is a need to better understand the interactions between anthropogenic emissions and marine atmospheres. Herein an atmospheric chemistry-transport model is used to assess the impacts of sea-spray chemistry on the particle composition in and downwind of a coastal city--Vancouver, British Columbia. It is shown that the model can reasonably represent the average features of the gas phase and particle climate relative to in situ measurements. It is further demonstrated that reactions in/on sea-spray affect the entire particle ensemble and particularly the size distribution of particle nitrate, but that the importance of these heterogeneous reactions is critically dependent on both the initial vertical profile of sea spray and the sea-spray source functions. The results emphasize the need for improved understanding of sea spray production and dispersion and further that model analyses of air quality in coastal cities conducted without inclusion of sea-spray interactions may yield mis-leading results in terms of emission sensitivities of particle composition and concentrations.

Understanding bicycling in cities using system dynamics modelling.

PubMed

Macmillan, Alexandra; Woodcock, James

2017-12-01

Increasing urban bicycling has established net benefits for human and environmental health. Questions remain about which policies are needed and in what order, to achieve an increase in cycling while avoiding negative consequences. Novel ways of considering cycling policy are needed, bringing together expertise across policy, community and research to develop a shared understanding of the dynamically complex cycling system. In this paper we use a collaborative learning process to develop a dynamic causal model of urban cycling to develop consensus about the nature and order of policies needed in different cycling contexts to optimise outcomes. We used participatory system dynamics modelling to develop causal loop diagrams (CLDs) of cycling in three contrasting contexts: Auckland, London and Nijmegen. We combined qualitative interviews and workshops to develop the CLDs. We used the three CLDs to compare and contrast influences on cycling at different points on a "cycling trajectory" and drew out policy insights. The three CLDs consisted of feedback loops dynamically influencing cycling, with significant overlap between the three diagrams. Common reinforcing patterns emerged: growing numbers of people cycling lifts political will to improve the environment; cycling safety in numbers drives further growth; and more cycling can lead to normalisation across the population. By contrast, limits to growth varied as cycling increases. In Auckland and London, real and perceived danger was considered the main limit, with added barriers to normalisation in London. Cycling congestion and "market saturation" were important in the Netherlands. A generalisable, dynamic causal theory for urban cycling enables a more ordered set of policy recommendations for different cities on a cycling trajectory. Participation meant the collective knowledge of cycling stakeholders was represented and triangulated with research evidence. Extending this research to further cities, especially in low

Fine particle receptor modeling in the atmosphere of Mexico City.

PubMed

Vega, Elizabeth; Lowenthal, Douglas; Ruiz, Hugo; Reyes, Elizabeth; Watson, John G; Chow, Judith C; Viana, Mar; Querol, Xavier; Alastuey, Andrés

2009-12-01

Source apportionment analyses were carried out by means of receptor modeling techniques to determine the contribution of major fine particulate matter (PM2.5) sources found at six sites in Mexico City. Thirty-six source profiles were determined within Mexico City to establish the fingerprints of particulate matter sources. Additionally, the profiles under the same source category were averaged using cluster analysis and the fingerprints of 10 sources were included. Before application of the chemical mass balance (CMB), several tests were carried out to determine the best combination of source profiles and species used for the fitting. CMB results showed significant spatial variations in source contributions among the six sites that are influenced by local soil types and land use. On average, 24-hr PM2.5 concentrations were dominated by mobile source emissions (45%), followed by secondary inorganic aerosols (16%) and geological material (17%). Industrial emissions representing oil combustion and incineration contributed less than 5%, and their contribution was higher at the industrial areas of Tlalnepantla (11%) and Xalostoc (8%). Other sources such as cooking, biomass burning, and oil fuel combustion were identified at lower levels. A second receptor model (principal component analysis, [PCA]) was subsequently applied to three of the monitoring sites for comparison purposes. Although differences were obtained between source contributions, results evidence the advantages of the combined use of different receptor modeling techniques for source apportionment, given the complementary nature of their results. Further research is needed in this direction to reach a better agreement between the estimated source contributions to the particulate matter mass.

Integrated Use of Remote Sensed Data and Numerical Cartography for the Generation of 3d City Models

NASA Astrophysics Data System (ADS)

Bitelli, G.; Girelli, V. A.; Lambertini, A.

2018-05-01

3D city models are becoming increasingly popular and important, because they constitute the base for all the visualization, planning, management operations regarding the urban infrastructure. These data are however not available in the majority of cities: in this paper, the possibility to use geospatial data of various kinds with the aim to generate 3D models in urban environment is investigated. In 3D modelling works, the starting data are frequently the 3D point clouds, which are nowadays possible to collect by different sensors mounted on different platforms: LiDAR, imagery from satellite, airborne or unmanned aerial vehicles, mobile mapping systems that integrate several sensors. The processing of the acquired data and consequently the obtainability of models able to provide geometric accuracy and a good visual impact is limited by time, costs and logistic constraints. Nowadays more and more innovative hardware and software solutions can offer to the municipalities and the public authorities the possibility to use available geospatial data, acquired for diverse aims, for the generation of 3D models of buildings and cities, characterized by different level of detail. In the paper two cases of study are presented, both regarding surveys carried out in Emilia Romagna region, Italy, where 2D or 2.5D numerical maps are available. The first one is about the use of oblique aerial images realized by the Municipality for a systematic documentation of the built environment, the second concerns the use of LiDAR data acquired for other purposes; in the two tests, these data were used in conjunction with large scale numerical maps to produce 3D city models.

Synthesis of zeolites Na-A and Na-X from tablet compressed and calcinated coal fly ash

NASA Astrophysics Data System (ADS)

Hu, Tao; Gao, Wenyan; Liu, Xin; Zhang, Yifu; Meng, Changgong

2017-10-01

Zeolites Na-A and Na-X are important synthetic zeolites widely used for separation and adsorption in industry. It is of great significance to develop energy-efficient routines that can synthesize zeolites Na-A and Na-X from low-cost raw materials. Coal fly ash (CFA) is the major residue from the combustion of coal and biomass containing more than 85% SiO2 and Al2O3, which can readily replace the conventionally used sodium silicate and aluminate for zeolite synthesis. We used Na2CO3 to replace the expensive NaOH used for the calcination of CFA and showed that tablet compression can enhance the contact with Na2CO3 for the activation of CFA through calcination for the synthesis of zeolites Na-A and Na-X under mild conditions. We optimized the control variables for zeolite synthesis and showed that phase-pure zeolite Na-A can be synthesized with CFA at reactant molar ratio, hydrothermal reaction temperature and reaction time of 1.3Na2O: 0.6Al2O3: 1SiO2: 38H2O at 80°C for 6 h, respectively, while phase-pure zeolite Na-X can be synthesized at 2.2Na2O: 0.2Al2O3: 1SiO2: 88H2O at 100°C for 8 h, respectively. The composition, morphology, specific surface area, vibration spectrum and thermogravimetry of synthesized Na-A and Na-X were further characterized.

22. TWIN FALLS MAIN CANAL HEADWORKS WITH MILNER DAM IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. TWIN FALLS MAIN CANAL HEADWORKS WITH MILNER DAM IN DISTANCE; LOOKING EAST. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

22. Photocopy of April 30, 1904 photograph. Glass Negative Box ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. Photocopy of April 30, 1904 photograph. Glass Negative Box IX, Tower Grove, Missouri Botanical Garden. 'TULIPS IN THE MAIN GARDEN' VIEW LOOKING NORTHEAST FROM CENTRAL GARDEN - Missouri Botanical Garden, 2345 Tower Grove Avenue, Saint Louis, Independent City, MO

Excitation functions for 7Be, 22,24Na production in Mg and Al by deuteron irradiations up to 50 MeV.

PubMed

Hermanne, A; Takács, S; Tárkányi, F; Adam-Rebeles, R; Ignatyuk, A

2012-12-01

New experimental data for production of (7)Be and (22,24)Na in deuteron irradiation of (nat)Mg and Al up to 50 MeV are presented. The induced activity, measured with HPGe spectroscopy, allows us to determine excitation functions of (nat)Mg(d,x) and (27)Al(d,x) reactions involved in the activation process with reference to (nat)Ti(d,x)(48)V monitor cross sections. A comparison with experimental literature values and results from updated theoretical codes is discussed. Thick target yields were derived from fits to our cross-sections and integrated personnel dose was calculated for different irradiation cycles and exposure scenarios around high power deuteron accelerator facilities. Copyright © 2012 Elsevier Ltd. All rights reserved.

The dynamics of city formation*

PubMed Central

Henderson, J. Vernon; Venables, Anthony J.

2013-01-01

This paper examines city formation in a country whose urban population is growing steadily over time, with new cities required to accommodate this growth. In contrast to most of the literature there is immobility of housing and urban infrastructure, and investment in these assets is taken on the basis of forward-looking behavior. In the presence of these fixed assets cities form sequentially, without the population swings in existing cities that arise in current models, but with swings in house rents. Equilibrium city size, absent government, may be larger or smaller than is efficient, depending on how urban externalities vary with population. Efficient formation of cities with internalization of externalities involves local government intervention and borrowing to finance development. The paper explores the institutions required for successful local government intervention. PMID:25089087

Hearing Loss in a Mouse Model of 22q11.2 Deletion Syndrome

PubMed Central

Fuchs, Jennifer C.; Zinnamon, Fhatarah A.; Taylor, Ruth R.; Ivins, Sarah; Scambler, Peter J.; Forge, Andrew; Tucker, Abigail S.; Linden, Jennifer F.

2013-01-01

22q11.2 Deletion Syndrome (22q11DS) arises from an interstitial chromosomal microdeletion encompassing at least 30 genes. This disorder is one of the most significant known cytogenetic risk factors for schizophrenia, and can also cause heart abnormalities, cognitive deficits, hearing difficulties, and a variety of other medical problems. The Df1/+ hemizygous knockout mouse, a model for human 22q11DS, recapitulates many of the deficits observed in the human syndrome including heart defects, impaired memory, and abnormal auditory sensorimotor gating. Here we show that Df1/+ mice, like human 22q11DS patients, have substantial rates of hearing loss arising from chronic middle ear infection. Auditory brainstem response (ABR) measurements revealed significant elevation of click-response thresholds in 48% of Df1/+ mice, often in only one ear. Anatomical and histological analysis of the middle ear demonstrated no gross structural abnormalities, but frequent signs of otitis media (OM, chronic inflammation of the middle ear), including excessive effusion and thickened mucosa. In mice for which both in vivo ABR thresholds and post mortem middle-ear histology were obtained, the severity of signs of OM correlated directly with the level of hearing impairment. These results suggest that abnormal auditory sensorimotor gating previously reported in mouse models of 22q11DS could arise from abnormalities in auditory processing. Furthermore, the findings indicate that Df1/+ mice are an excellent model for increased risk of OM in human 22q11DS patients. Given the frequently monaural nature of OM in Df1/+ mice, these animals could also be a powerful tool for investigating the interplay between genetic and environmental causes of OM. PMID:24244619

Hearing loss in a mouse model of 22q11.2 Deletion Syndrome.

PubMed

Fuchs, Jennifer C; Zinnamon, Fhatarah A; Taylor, Ruth R; Ivins, Sarah; Scambler, Peter J; Forge, Andrew; Tucker, Abigail S; Linden, Jennifer F

2013-01-01

22q11.2 Deletion Syndrome (22q11DS) arises from an interstitial chromosomal microdeletion encompassing at least 30 genes. This disorder is one of the most significant known cytogenetic risk factors for schizophrenia, and can also cause heart abnormalities, cognitive deficits, hearing difficulties, and a variety of other medical problems. The Df1/+ hemizygous knockout mouse, a model for human 22q11DS, recapitulates many of the deficits observed in the human syndrome including heart defects, impaired memory, and abnormal auditory sensorimotor gating. Here we show that Df1/+ mice, like human 22q11DS patients, have substantial rates of hearing loss arising from chronic middle ear infection. Auditory brainstem response (ABR) measurements revealed significant elevation of click-response thresholds in 48% of Df1/+ mice, often in only one ear. Anatomical and histological analysis of the middle ear demonstrated no gross structural abnormalities, but frequent signs of otitis media (OM, chronic inflammation of the middle ear), including excessive effusion and thickened mucosa. In mice for which both in vivo ABR thresholds and post mortem middle-ear histology were obtained, the severity of signs of OM correlated directly with the level of hearing impairment. These results suggest that abnormal auditory sensorimotor gating previously reported in mouse models of 22q11DS could arise from abnormalities in auditory processing. Furthermore, the findings indicate that Df1/+ mice are an excellent model for increased risk of OM in human 22q11DS patients. Given the frequently monaural nature of OM in Df1/+ mice, these animals could also be a powerful tool for investigating the interplay between genetic and environmental causes of OM.

Public bike sharing in New York City: helmet use behavior patterns at 25 Citi Bike™ stations.

PubMed

Basch, Corey H; Ethan, Danna; Zybert, Patricia; Afzaal, Sarah; Spillane, Michael; Basch, Charles E

2015-06-01

Urban public bicycle sharing programs are on the rise in the United States. Launched in 2013, NYC's public bicycle share program, Citi Bike™ is the fastest growing program of its kind in the nation, with nearly 100,000 members and more than 330 docking stations across Manhattan and Brooklyn. The purpose of this study was to assess helmet use behavior among Citi Bike™ riders at 25 of the busiest docking stations. The 25 Citi Bike™ Stations varied greatly in terms of usage: total number of cyclists (N = 96-342), commute versus recreation (22.9-79.5% commute time riders), weekday versus weekend (6.0-49.0% weekend riders). Helmet use ranged between 2.9 and 29.2% across sites (median = 7.5 %). A total of 4,919 cyclists were observed, of whom 545 (11.1%) were wearing helmets. Incoming cyclists were more likely to wear helmets than outgoing cyclists (11.0 vs 5.9%, p = .000). NYC's bike share program endorses helmet use, but relies on education to encourage it. Our data confirm that, to date, this strategy has not been successful.

Does Urban Form Affect Urban NO2? Satellite-Based Evidence for More than 1200 Cities.

PubMed

Bechle, Matthew J; Millet, Dylan B; Marshall, Julian D

2017-11-07

Modifying urban form may be a strategy to mitigate urban air pollution. For example, evidence suggests that urban form can affect motor vehicle usage, a major contributor to urban air pollution. We use satellite-based measurements of urban form and nitrogen dioxide (NO 2 ) to explore relationships between urban form and air pollution for a global data  set of 1274 cities. Three of the urban form metrics studied (contiguity, circularity, and vegetation) have a statistically significant relationship with urban NO 2 ; their combined effect could be substantial. As illustration, if findings presented here are causal, that would suggest that if Christchurch, New Zealand (a city at the 75th percentile for all three urban-form metrics, and with a network of buses, trams, and bicycle facilities) was transformed to match the urban form of Indio - Cathedral City, California, United States (a city at the 25th percentile for those same metrics, and exhibiting sprawl-like suburban development), our models suggest that Christchurch's NO 2 concentrations would be ∼60% higher than its current level. We also find that the combined effect of urban form on NO 2 is larger for small cities (β × IQR = -0.46 for cities < ∼300 000 people, versus -0.22 for all cities), an important finding given that cities less than 500 000 people contain a majority of the urban population and are where much of the future urban growth is expected to occur. This work highlights the need for future study of how changes in urban form and related land use and transportation policies impact urban air pollution, especially for small cities.

Recent advances in modeling the propagation noise in high-rise cities

NASA Astrophysics Data System (ADS)

Li, Kai Ming

2005-04-01

In the past few decades, we have witnessed a rapid growth in mechanized transport and transportation systems. We live in a transport-dominated society which has led to a marked improvement in dispersal of land use and to the increased opportunity for the separate development of residential, commercial, and industrial areas. In dense and high-rise cities, various modes of land transportation are the primary source of noise. The problem of transportation noise is not confined by political or social frontiers. It affects the rich who may live in a quiet residential area but who must make full use of transport to maintain their affluent existence, as well as the less fortunate who must live close to a highway, a major road, or an elevated railway line. A systematic development of the capability for accurate predictions of the propagation of land transportation noise in dense high-rise cities is highly desirable. This paper summarizes the current models for predicting sound fields in urban environments and gives an overview of the recent advances of various numerical models to predict the sound field in urban environments. [Work supported by the Research Grants Council of the Hong Kong SAR Government and the Hong Kong Polytechnic University.

Representation of urban surfaces of tropical and subtropical cities in numerical models of the atmosphere

NASA Astrophysics Data System (ADS)

Karam, H. A.; Pereira Filho, A. J.

This work proposes a numerical representation of the urban surface for tropical and subtropical cities in numerical models of atmosphere. A typical tropical metropolis is São Paulo City, SP, Brazil, that presents a neighborhood area characterized by an uncompleted urbanization and where the public services are limited in attend the needs of the population. The suburban area of São Paulo city presents an occupation that is distinguished of the typical occupation of the European cities because: (1) it occurs in risk areas, i.e., over inclined terrain or potentially flooded areas on the borders of rivers; (2) the buildings are made with some cheap row material mixed with traditional materials; (3) the distribution of short and long wave radiation is conditioned by the inclination of the terrain, geometry of the buildings, materials and population density; (4) the exclusion of many common living areas; (5) intense or free thermal convection is found over the urban surface on the diurnal time with impact in the Atmospheric Boundary Layer dynamics; (6) high levels of airborne pollutants are found; etc. The proposed numerical scheme is designed to contribute with the current tools used to forecast the impact of convective precipitations in the risk areas of São Paulo City.

Gray correlation analysis and prediction models of living refuse generation in Shanghai city.

PubMed

Liu, Gousheng; Yu, Jianguo

2007-01-01

A better understanding of the factors that affect the generation of municipal living refuse (MLF) and the accurate prediction of its generation are crucial for municipal planning projects and city management. Up to now, most of the design efforts have been based on a rough prediction of MLF without any actual support. In this paper, based on published data of socioeconomic variables and MLF generation from 1990 to 2003 in the city of Shanghai, the main factors that affect MLF generation have been quantitatively studied using the method of gray correlation coefficient. Several gray models, such as GM(1,1), GIM(1), GPPM(1) and GLPM(1), have been studied, and predicted results are verified with subsequent residual test. Results show that, among the selected seven factors, consumption of gas, water and electricity are the largest three factors affecting MLF generation, and GLPM(1) is the optimized model to predict MLF generation. Through this model, the predicted MLF generation in 2010 in Shanghai will be 7.65 million tons. The methods and results developed in this paper can provide valuable information for MLF management and related municipal planning projects.

Sodium intercalation in the phosphosulfate cathode NaFe2(PO4)(SO4)2

NASA Astrophysics Data System (ADS)

Ben Yahia, Hamdi; Essehli, Rachid; Amin, Ruhul; Boulahya, Khalid; Okumura, Toyoki; Belharouak, Ilias

2018-04-01

The compound NaFe2(PO4)(SO4)2 is successfully synthesized via a solid state reaction route and its crystal structure is determined using powder X-ray diffraction data. NaFe2(PO4)(SO4)2 phase is also characterized by cyclic voltammetry, galvanostatic cycling and electrochemical impedance spectroscopy. NaFe2(PO4)(SO4)2 crystallizes with the well-known NASICON-type structure. SAED and HRTEM experiments confirm the structural model, and no ordering between the PO4-3 and SO4-2 polyanions is detected. The electrochemical tests indicate that NaFe2(PO4)(SO4)2 is a 3 V sodium intercalating cathode. The electrical conductivity is relatively low (2.2 × 10-6 Scm-1 at 200 °C) and the obtained activation energy is ∼0.60eV. The GITT experiments indicate that the diffusivity values are in the range of 10-11-10-12 cm2/s within the measured sodium concentrations.

Novel naïve Bayes classification models for predicting the chemical Ames mutagenicity.

PubMed

Zhang, Hui; Kang, Yan-Li; Zhu, Yuan-Yuan; Zhao, Kai-Xia; Liang, Jun-Yu; Ding, Lan; Zhang, Teng-Guo; Zhang, Ji

2017-06-01

Prediction of drug candidates for mutagenicity is a regulatory requirement since mutagenic compounds could pose a toxic risk to humans. The aim of this investigation was to develop a novel prediction model of mutagenicity by using a naïve Bayes classifier. The established model was validated by the internal 5-fold cross validation and external test sets. For comparison, the recursive partitioning classifier prediction model was also established and other various reported prediction models of mutagenicity were collected. Among these methods, the prediction performance of naïve Bayes classifier established here displayed very well and stable, which yielded average overall prediction accuracies for the internal 5-fold cross validation of the training set and external test set I set were 89.1±0.4% and 77.3±1.5%, respectively. The concordance of the external test set II with 446 marketed drugs was 90.9±0.3%. In addition, four simple molecular descriptors (e.g., Apol, No. of H donors, Num-Rings and Wiener) related to mutagenicity and five representative substructures of mutagens (e.g., aromatic nitro, hydroxyl amine, nitroso, aromatic amine and N-methyl-N-methylenemethanaminum) produced by ECFP_14 fingerprints were identified. We hope the established naïve Bayes prediction model can be applied to risk assessment processes; and the obtained important information of mutagenic chemicals can guide the design of chemical libraries for hit and lead optimization. Copyright © 2017 Elsevier B.V. All rights reserved.

Fin Buffeting Features of an Early F-22 Model

NASA Technical Reports Server (NTRS)

Moses, Robert W.; Huttsell, Lawrence

2000-01-01

Fin buffeting is an aeroelastic phenomenon encountered by high performance aircraft, especially those with twin vertical tails that must operate at high angles of attack. This buffeting is a concern from fatigue and inspection points of view. To date, the buffet (unsteady pressures) and buffeting (structural response) characteristics of the F-15 and F/A-18 fins have been studied extensively using flow visualization, flow velocity measurements, pressure transducers, and response gages. By means of windtunnel and flight tests of the F-15 and F/A-18, this phenomenon is well studied to the point that buffet loads can be estimated and fatigue life can he increased by structural enhancements to these airframes. However, prior to the present research, data was not available outside the F-22 program regarding fin buffeting on the F-22 configuration. During a test in the Langley Transonic Dynamics Tunnel, flow visualization and unsteady fin surface pressures were recorded for a 13.3%-scale F-22 model at high angles of attack for the purpose of comparing with results available for similar aircraft configurations. Details of this test and fin buffeting are presented herein.

Na/beta-alumina/NaAlCl4, Cl2/C circulating cell

NASA Technical Reports Server (NTRS)

Cherng, Jing-Yih; Bennion, Douglas N.

1987-01-01

A study was made of a high specific energy battery based on a sodium negative electrode and a chlorine positive electrode with molten AlCl3-NaCl electrolyte and a solid beta alumina separator. The basic performance of a Na beta-alumina NaAlCl4, Cl2/C circulating cell at 200 C was demonstrated. This cell can be started at 150 C. The use of melting sodium chloroaluminate electrolyte overcomes some of the material problems associated with the high working temperatures of present molten salt systems, such as Na/S and LiAl/FeS, and retains the advantages of high energy density and relatively efficient electrode processes. Preliminary investigations were conducted on a sodium-chlorine static cell, material compability, electrode design, wetting, and theoretical calculations to assure a better chance of success before assembling a Na/Cl2 circulating cell. Mathematical models provide a theoretical explanation for the performance of the NaCl2 battery. The results of mathematical models match the experimental results very well. According to the result of the mathematical modeling, an output at 180 mA/sq cm and 3.2 V can be obtained with optimized cell design.

22. Photocopy of pre1891 photograph. Original in library of Lehmann ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. Photocopy of pre-1891 photograph. Original in library of Lehmann Building, Missouri Botanical Garden. HOUSE ON ORIGINAL SITE, SHOWING SOUTH WING STUCCOED - Missouri Botanical Garden, Henry Shaw Townhouse, 2345 Tower Grove Avenue, Saint Louis, Independent City, MO

Comparison of Modeled Results for Kansas City Middle Blue River Green Infrastructure Pilot Project

EPA Science Inventory

The Water Services Department (WSD) in Kansas City, Missouri (KCMO) has conducted extensive modeling and economic studies of its combined sewer system (CSS) over the last several years. A number of green infrastructure (GI) solutions were identified and constructed to reduce dis...

Do women in major cities experience better health? A comparison of chronic conditions and their risk factors between women living in major cities and other cities in Indonesia.

PubMed

Christiani, Yodi; Byles, Julie E; Tavener, Meredith; Dugdale, Paul

2015-01-01

Inhabitants of rural areas can be tempted to migrate to urban areas for the type and range of facilities available. Although urban inhabitants may benefit from greater access to human and social services, living in a big city can also bring disadvantages to some residents due to changes in social and physical environments. We analysed data from 4,208 women aged >15 years old participating in the fourth wave of the Indonesia Family Life Survey. Chronic condition risk factors - systolic and diastolic blood pressure (SBP and DBP), body mass index (BMI), and tobacco use - among women in four major cities in Indonesia (Jakarta, Surabaya, Medan, and Bandung) were compared against other cities. Fractional polynomial regression models were applied to examine the association between living in the major cities and SBP, DBP, BMI, and tobacco use. The models were also adjusted for age, education, employment status, migration status, ethnic groups, and religion. The patterns of SBP, DBP, and BMI were plotted and contrasted between groups of cities. Chronic condition prevalence was higher for women in major cities than in contrasting cities (p<0.005). Living in major cities increased the risk of having higher SBP, DBP, BMI and being a current smoker. Chronic disease risk factors in major cities were evident from younger ages. Women residing in Indonesia's major cities have a higher risk of developing chronic conditions, starting at younger ages. The findings highlight the challenges inherent in providing long-term healthcare with its associated cost within major Indonesian cities and the importance of chronic disease prevention programmes targeting women at an early age.

Do women in major cities experience better health? A comparison of chronic conditions and their risk factors between women living in major cities and other cities in Indonesia

PubMed Central

Christiani, Yodi; Byles, Julie E.; Tavener, Meredith; Dugdale, Paul

2015-01-01

Background Inhabitants of rural areas can be tempted to migrate to urban areas for the type and range of facilities available. Although urban inhabitants may benefit from greater access to human and social services, living in a big city can also bring disadvantages to some residents due to changes in social and physical environments. Design We analysed data from 4,208 women aged >15 years old participating in the fourth wave of the Indonesia Family Life Survey. Chronic condition risk factors – systolic and diastolic blood pressure (SBP and DBP), body mass index (BMI), and tobacco use – among women in four major cities in Indonesia (Jakarta, Surabaya, Medan, and Bandung) were compared against other cities. Fractional polynomial regression models were applied to examine the association between living in the major cities and SBP, DBP, BMI, and tobacco use. The models were also adjusted for age, education, employment status, migration status, ethnic groups, and religion. The patterns of SBP, DBP, and BMI were plotted and contrasted between groups of cities. Results Chronic condition prevalence was higher for women in major cities than in contrasting cities (p<0.005). Living in major cities increased the risk of having higher SBP, DBP, BMI and being a current smoker. Chronic disease risk factors in major cities were evident from younger ages. Conclusions Women residing in Indonesia's major cities have a higher risk of developing chronic conditions, starting at younger ages. The findings highlight the challenges inherent in providing long-term healthcare with its associated cost within major Indonesian cities and the importance of chronic disease prevention programmes targeting women at an early age. PMID:26689455

[Dynamic monitoring and analysis of ecological environment in Weinan City, Northwest China based on RSEI model].

PubMed

Song, Hui Min; Xue, Liang

2016-12-01

Based on the data of remote sensing images from Landsat in 1995 and 2015, this paper used the principal component analysis (PCA) method to determine the weights of four ecological indexes (greenness, dryness, wetness and heat), and then selected a evaluation model of remote sensing based ecological index (RSEI) to monitor and analyze the ecological environment quality of Weinan City from 1995 to 2015. The results showed that the mean values of RSEI in Weinan City increased from 0.489 to 0.556 during 1995-2015, which indicated the ecological environment qua-lity had been improved. The improved area of ecological quality was mainly distributed in the central area of Weinan City and its proportion was 49.6%. While the proportion of ecological environment degradation was 15.4%, and such areas were mainly distributed in some mine areas of Hancheng City and the southern Weinan (Weinan Section in North Qinling Mountains). The quality of ecolo-gical environment was greatly influenced by the urban planning and construction in the study area. Generally, the ecological condition of Weinan City had been improved, which benefited from the attention and investment of government.

Modeling the Surface Energy Balance of the Core of an Old Mediterranean City: Marseille.

NASA Astrophysics Data System (ADS)

Lemonsu, A.; Grimmond, C. S. B.; Masson, V.

2004-02-01

The Town Energy Balance (TEB) model, which parameterizes the local-scale energy and water exchanges between urban surfaces and the atmosphere by treating the urban area as a series of urban canyons, coupled to the Interactions between Soil, Biosphere, and Atmosphere (ISBA) scheme, was run in offline mode for Marseille, France. TEB's performance is evaluated with observations of surface temperatures and surface energy balance fluxes collected during the field experiments to constrain models of atmospheric pollution and transport of emissions (ESCOMPTE) urban boundary layer (UBL) campaign. Particular attention was directed to the influence of different surface databases, used for input parameters, on model predictions. Comparison of simulated canyon temperatures with observations resulted in improvements to TEB parameterizations by increasing the ventilation. Evaluation of the model with wall, road, and roof surface temperatures gave good results. The model succeeds in simulating a sensible heat flux larger than heat storage, as observed. A sensitivity comparison using generic dense city parameters, derived from the Coordination of Information on the Environment (CORINE) land cover database, and those from a surface database developed specifically for the Marseille city center shows the importance of correctly documenting the urban surface. Overall, the TEB scheme is shown to be fairly robust, consistent with results from previous studies.

Future heat-waves, droughts and floods in 571 European cities

NASA Astrophysics Data System (ADS)

Guerreiro, Selma B.; Dawson, Richard J.; Kilsby, Chris; Lewis, Elizabeth; Ford, Alistair

2018-03-01

Cities are particularly vulnerable to climate risks due to their agglomeration of people, buildings and infrastructure. Differences in methodology, hazards considered, and climate models used limit the utility and comparability of climate studies on individual cities. Here we assess, for the first time, future changes in flood, heat-waves (HW), and drought impacts for all 571 European cities in the Urban Audit database using a consistent approach. To capture the full range of uncertainties in natural variability and climate models, we use all climate model runs from the Coupled Model Inter-comparison Project Phase 5 (CMIP5) for the RCP8.5 emissions scenario to calculate Low, Medium and High Impact scenarios, which correspond to the 10th, 50th and 90th percentiles of each hazard for each city. We find that HW days increase across all cities, but especially in southern Europe, whilst the greatest HW temperature increases are expected in central European cities. For the low impact scenario, drought conditions intensify in southern European cities while river flooding worsens in northern European cities. However, the high impact scenario projects that most European cities will see increases in both drought and river flood risks. Over 100 cities are particularly vulnerable to two or more climate impacts. Moreover, the magnitude of impacts exceeds those previously reported highlighting the substantial challenge cities face to manage future climate risks.

Using Geometry-Based Metrics as Part of Fitness-for-Purpose Evaluations of 3D City Models

NASA Astrophysics Data System (ADS)

Wong, K.; Ellul, C.

2016-10-01

Three-dimensional geospatial information is being increasingly used in a range of tasks beyond visualisation. 3D datasets, however, are often being produced without exact specifications and at mixed levels of geometric complexity. This leads to variations within the models' geometric and semantic complexity as well as the degree of deviation from the corresponding real world objects. Existing descriptors and measures of 3D data such as CityGML's level of detail are perhaps only partially sufficient in communicating data quality and fitness-for-purpose. This study investigates whether alternative, automated, geometry-based metrics describing the variation of complexity within 3D datasets could provide additional relevant information as part of a process of fitness-for-purpose evaluation. The metrics include: mean vertex/edge/face counts per building; vertex/face ratio; minimum 2D footprint area and; minimum feature length. Each metric was tested on six 3D city models from international locations. The results show that geometry-based metrics can provide additional information on 3D city models as part of fitness-for-purpose evaluations. The metrics, while they cannot be used in isolation, may provide a complement to enhance existing data descriptors if backed up with local knowledge, where possible.

Land use regression models to assess air pollution exposure in Mexico City using finer spatial and temporal input parameters.

PubMed

Son, Yeongkwon; Osornio-Vargas, Álvaro R; O'Neill, Marie S; Hystad, Perry; Texcalac-Sangrador, José L; Ohman-Strickland, Pamela; Meng, Qingyu; Schwander, Stephan

2018-05-17

The Mexico City Metropolitan Area (MCMA) is one of the largest and most populated urban environments in the world and experiences high air pollution levels. To develop models that estimate pollutant concentrations at fine spatiotemporal scales and provide improved air pollution exposure assessments for health studies in Mexico City. We developed finer spatiotemporal land use regression (LUR) models for PM 2.5 , PM 10 , O 3 , NO 2 , CO and SO 2 using mixed effect models with the Least Absolute Shrinkage and Selection Operator (LASSO). Hourly traffic density was included as a temporal variable besides meteorological and holiday variables. Models of hourly, daily, monthly, 6-monthly and annual averages were developed and evaluated using traditional and novel indices. The developed spatiotemporal LUR models yielded predicted concentrations with good spatial and temporal agreements with measured pollutant levels except for the hourly PM 2.5 , PM 10 and SO 2 . Most of the LUR models met performance goals based on the standardized indices. LUR models with temporal scales greater than one hour were successfully developed using mixed effect models with LASSO and showed superior model performance compared to earlier LUR models, especially for time scales of a day or longer. The newly developed LUR models will be further refined with ongoing Mexico City air pollution sampling campaigns to improve personal exposure assessments. Copyright © 2018. Published by Elsevier B.V.

Competence skills help deter smoking among inner city adolescents.

PubMed

Epstein, J A; Griffin, K W; Botvin, G J

2000-03-01

To test whether higher levels of general competence are linked to more frequent use of refusal assertiveness that is in turn related to less subsequent smoking among inner city adolescents. Longitudinal study conducted during three year middle school or junior high school period. A sample of 1459 students attending 22 middle (ages 11-14 years) and junior high (ages 12-15 years) schools in New York City participated. Students completed surveys at baseline, one year follow up, and two year follow up. The students self reported smoking, decision making skills, personal efficacy, and refusal assertiveness. Teams of three to five data collectors administered the questionnaire following a standardised protocol. These data were collected in school during a regular 40 minute class period. Based on the tested structural equation model, decision making and personal efficacy (that is, general competence) predicted higher refusal assertiveness and this greater assertiveness predicted less smoking at the two year follow up. The tested model had a good fit and was parsimonious and consistent with theory. Adolescent smoking prevention programmes often teach refusal skills in order to help youth resist peer pressure to smoke. The present findings suggest that teaching general competence skills as well may help to reduce smoking because youth with better personal efficacy and decision making skills are better able to implement smoking refusal strategies.

Stochastic strong motion generation using slip model of 21 and 22 May 1960 mega-thrust earthquakes in the main cities of Central-South Chile

NASA Astrophysics Data System (ADS)

Ruiz, S.; Ojeda, J.; DelCampo, F., Sr.; Pasten, C., Sr.; Otarola, C., Sr.; Silva, R., Sr.

2017-12-01

In May 1960 took place the most unusual seismic sequence registered instrumentally. The Mw 8.1, Concepción earthquake occurred May, 21, 1960. The aftershocks of this event apparently migrated to the south-east, and the Mw 9.5, Valdivia mega-earthquake occurred after 33 hours. The structural damage produced by both events is not larger than other earthquakes in Chile and lower than crustal earthquakes of smaller magnitude. The damage was located in the sites with shallow soil layers of low shear wave velocity (Vs). However, no seismological station recorded this sequence. For that reason, we generate synthetic acceleration times histories for strong motion in the main cities affected by these events. We use 155 points of vertical surface displacements recopiled by Plafker and Savage in 1968, and considering the observations of this authors and local residents we separated the uplift and subsidence information associated to the first earthquake Mw 8.1 and the second mega-earthquake Mw 9.5. We consider the elastic deformation propagation, assume realist lithosphere geometry, and compute a Bayesian method that maximizes the probability density a posteriori to obtain the slip distribution. Subsequently, we use a stochastic method of generation of strong motion considering the finite fault model obtained for both earthquakes. We considered the incidence angle of ray to the surface, free surface effect and energy partition for P, SV and SH waves, dynamic corner frequency and the influence of site effect. The results show that the earthquake Mw 8.1 occurred down-dip the slab, the strong motion records are similar to other Chilean earthquake like Tocopilla Mw 7.7 (2007). For the Mw 9.5 earthquake we obtain synthetic acceleration time histories with PGA values around 0.8 g in cities near to the maximum asperity or that have low velocity soil layers. This allows us to conclude that strong motion records have important influence of the shallow soil deposits. These records

Impact of meteorological changes on the incidence of scarlet fever in Hefei City, China

NASA Astrophysics Data System (ADS)

Duan, Yu; Huang, Xiao-lei; Wang, Yu-jie; Zhang, Jun-qing; Zhang, Qi; Dang, Yue-wen; Wang, Jing

2016-10-01

Studies on scarlet fever with meteorological factors included were few. We aimed to illustrate meteorological factors' effects on monthly incidence of scarlet fever. Cases of scarlet fever were collected from the report of legal infectious disease in Hefei City from 1985 to 2006; the meteorological data were obtained from the weather bureau of Hefei City. Monthly incidence and corresponding meteorological data in these 22 years were used to develop the model. The model of auto regressive integrated moving average with covariates was used in statistical analyses. There was a highest peak from March to June and a small peak from November to January. The incidence of scarlet fever ranges from 0 to 0.71502 (per 105 population). SARIMAX (1,0,0)(1,0,0)12 model was fitted with monthly incidence and meteorological data optimally. It was shown that relative humidity ( β = -0.002, p = 0.020), mean temperature ( β = 0.006, p = 0.004), and 1 month lag minimum temperature ( β = -0.007, p < 0.001) had effect on the incidence of scarlet fever in Hefei. Besides, the incidence in a previous month (AR( β) = 0.469, p < 0.001) and in 12 months before (SAR( β) = 0.255, p < 0.001) was positively associated with the incidence. This study shows that scarlet fever incidence was negatively associated with monthly minimum temperature and relative humidity while was positively associated with mean temperature in Hefei City, China. Besides, the ARIMA model could be useful not only for prediction but also for the analysis of multiple correlations.

Boron uptake in tumors, cerebrum and blood from [10B]NA4B24H22S2

DOEpatents

Slatkin, Daniel N.; Micca, Peggy L.; Fairchild, Ralph G.

1988-08-02

A stable boronated (.sup.10 B-labeled) compound, sodium mercaptoundecahydrododecaborate is infused in the form of the disulfide dimer, [.sup.10 B]Na.sub.4 B.sub.24 H.sub.22 S.sub.2, at a dose of about 200 .mu.g .sup.10 B per gm body weight. The infusion is performed into the blood or peritoneal cavity of the patient slowly over a period of many days, perhaps one week or more, at the rate of roughly 1 .mu.g .sup.10 B per gm body weight per hour. Use of this particular boronated dimer in the manner or similarly to the manner so described permits radiotherapeutically effective amounts of boron to accumulate in tumors to be treated by boron neutron capture radiation therapy and also permits sufficient retention of boron in tumor after the cessation of the slow infusion, so as to allow the blood concentration of .sup.10 B to drop or to be reduced artificially to a radiotherapeutically effective level, less than one-half of the concentration of .sup.10 B in the tumor.

Boron uptake in tumors, cerebrum and blood from [10B]NA4B24H22S2

DOEpatents

Slatkin, Daniel N.; Micca, Peggy L.; Fairchild, Ralph G.

1988-01-01

A stable boronated (.sup.10 B-labeled) compound, sodium mercaptoundecahydrododecaborate is infused in the form of the disulfide dimer, [.sup.10 B]Na.sub.4 B.sub.24 H.sub.22 S.sub.2, at a dose of about 200 .mu.g .sup.10 B per gm body weight. The infusion is performed into the blood or peritoneal cavity of the patient slowly over a period of many days, perhaps one week or more, at the rate of roughly 1 .mu.g .sup.10 B per gm body weight per hour. Use of this particular boronated dimer in the manner or similarly to the manner so described permits radiotherapeutically effective amounts of boron to accumulate in tumors to be treated by boron neutron capture radiation therapy and also permits sufficient retention of boron in tumor after the cessation of the slow infusion, so as to allow the blood concentration of .sup.10 B to drop or to be reduced artificially to a radiotherapeutically effective level, less than one-half of the concentration of .sup.10 B in the tumor.

22 CFR 92.80 - Obtaining American vital statistics records.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Obtaining American vital statistics records. 92... statistics records. Individuals who inquire as to means of obtaining copies of or extracts from American... Vital Statistics Office at the place where the record is kept, which is usually in the capital city of...

27 CFR 22.113 - Receipt of tax-free alcohol.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., it shall be placed in the storage facilities prescribed by § 22.91 and kept there under lock until withdrawn for use. Unless required by city or State fire code regulations or authorized by the appropriate... alcohol is transferred to “safety” containers in accordance with fire code regulations, the containers to...

27 CFR 22.113 - Receipt of tax-free alcohol.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., it shall be placed in the storage facilities prescribed by § 22.91 and kept there under lock until withdrawn for use. Unless required by city or State fire code regulations or authorized by the appropriate... alcohol is transferred to “safety” containers in accordance with fire code regulations, the containers to...

27 CFR 22.113 - Receipt of tax-free alcohol.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., it shall be placed in the storage facilities prescribed by § 22.91 and kept there under lock until withdrawn for use. Unless required by city or State fire code regulations or authorized by the appropriate... alcohol is transferred to “safety” containers in accordance with fire code regulations, the containers to...

27 CFR 22.113 - Receipt of tax-free alcohol.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., it shall be placed in the storage facilities prescribed by § 22.91 and kept there under lock until withdrawn for use. Unless required by city or State fire code regulations or authorized by the appropriate... alcohol is transferred to “safety” containers in accordance with fire code regulations, the containers to...

27 CFR 22.113 - Receipt of tax-free alcohol.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., it shall be placed in the storage facilities prescribed by § 22.91 and kept there under lock until withdrawn for use. Unless required by city or State fire code regulations or authorized by the appropriate... alcohol is transferred to “safety” containers in accordance with fire code regulations, the containers to...

22 CFR 92.80 - Obtaining American vital statistics records.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Obtaining American vital statistics records. 92... statistics records. Individuals who inquire as to means of obtaining copies of or extracts from American... Vital Statistics Office at the place where the record is kept, which is usually in the capital city of...

Novel naïve Bayes classification models for predicting the carcinogenicity of chemicals.

PubMed

Zhang, Hui; Cao, Zhi-Xing; Li, Meng; Li, Yu-Zhi; Peng, Cheng

2016-11-01

The carcinogenicity prediction has become a significant issue for the pharmaceutical industry. The purpose of this investigation was to develop a novel prediction model of carcinogenicity of chemicals by using a naïve Bayes classifier. The established model was validated by the internal 5-fold cross validation and external test set. The naïve Bayes classifier gave an average overall prediction accuracy of 90 ± 0.8% for the training set and 68 ± 1.9% for the external test set. Moreover, five simple molecular descriptors (e.g., AlogP, Molecular weight (M W ), No. of H donors, Apol and Wiener) considered as important for the carcinogenicity of chemicals were identified, and some substructures related to the carcinogenicity were achieved. Thus, we hope the established naïve Bayes prediction model could be applied to filter early-stage molecules for this potential carcinogenicity adverse effect; and the identified five simple molecular descriptors and substructures of carcinogens would give a better understanding of the carcinogenicity of chemicals, and further provide guidance for medicinal chemists in the design of new candidate drugs and lead optimization, ultimately reducing the attrition rate in later stages of drug development. Copyright © 2016 Elsevier Ltd. All rights reserved.

Real-time micro-modelling of city evacuations

NASA Astrophysics Data System (ADS)

Löhner, Rainald; Haug, Eberhard; Zinggerling, Claudio; Oñate, Eugenio

2018-01-01

A methodology to integrate geographical information system (GIS) data with large-scale pedestrian simulations has been developed. Advances in automatic data acquisition and archiving from GIS databases, automatic input for pedestrian simulations, as well as scalable pedestrian simulation tools have made it possible to simulate pedestrians at the individual level for complete cities in real time. An example that simulates the evacuation of the city of Barcelona demonstrates that this is now possible. This is the first step towards a fully integrated crowd prediction and management tool that takes into account not only data gathered in real time from cameras, cell phones or other sensors, but also merges these with advanced simulation tools to predict the future state of the crowd.

Latin America's supercity--the metropolitan area of Mexico City.

PubMed

1987-02-01

Big and still growing, Mexico City and its environs is soon to be the world's largest metropolitan area. The lure of city amenties--jobs, health care, schooling, and cheap food--and the hope of a better life bring 1000 rural migrants to Mexico City every day. Between 1950 and 1980, Mexico City grew at an annual average rate of 5.4%. Mexico City is typical of Latin American supercities, holding an impressive portion of the nation's population and commanding the lion's share of the country's economic activities. It is primarily due to the rapid growth in the northern periphery of the municipalities that Mexico City is expected to grow into the world's largest metropolitan area by the year 2000. Given the high proportion of youth relative to the total population, it is not suprising that average household sizes in Mexico City are large. About 60% to 70% of all families have no access to the formal housing market; much of the urban expansion has occurred through the emergence of squatter communities. Water may indeed be the most serious of all of Mexico City's infrastructural problems. Other problems include: 1) the government cannot meet the demands for educational buildings and personnel; 2) in 1982, 10.3% of the metropolitan population lived in extreme poverty and an additional 22.6% were unable to satisfy their basic needs; and 3) transport is a central problem. Demographic sources for Mexico are discussed.

Low-field NMR determination of water distribution in meat batters with NaCl and polyphosphate addition.

PubMed

Shao, Jun-Hua; Deng, Ya-Min; Jia, Na; Li, Ru-Ren; Cao, Jin-Xuan; Liu, Deng-Yong; Li, Jian-Rong

2016-06-01

The objective was to elucidate the influence of NaCl and polyphosphates in the stage of protein swelling on the water-holding capacity (WHC) of meat batter. The meat batters were formulated with salt in different ways by adding established amounts of only NaCl, only polyphosphates, jointly adding NaCl and polyphosphates, and a control without any salt. An increase (p<0.05) in water retention was found when a combination of NaCl and polyphosphates was used. A high textural parameter was observed in the two treatments with NaCl, but not in the group with only polyphosphate. For the polyphosphate group, T22 was lower (p<0.05) than in the other three before heating; however, after heating, T21 and T22 were both significantly decreased, and a new component emerged, T23, which was significantly lower than the others. For the NaCl treatment, heated or not, T22 was always the highest. It was revealed that NaCl had affected the WHC by increasing the mobility and distribution of water, particularly with polyphosphate, but polyphosphate could not be an equal substitute for NaCl given its resulting lowest textural properties and poor microstructure. By presenting different hydration states in the protein swelling stage, the meat batter qualities were differentiated. Copyright © 2016 Elsevier Ltd. All rights reserved.

Rebuilding the City on the Hill

DTIC Science & Technology

2012-03-22

authorized “enhanced interrogation” techniques widely perceived as torture by many Americans. Following an abuse scandal at the Abu Ghraib prison in Iraq...1. REPORT DATE (DD-MM-YYYY) 22-03-2012 2. REPORT TYPE Strategy Research Project 3. DATES COVERED (From - To) OCT 2011 – FEB 2012 4. TITLE AND...code) Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39.18 USAWC STRATEGY RESEARCH PROJECT REBUILDING THE CITY ON

Chronic lithium treatment up-regulates cell surface Na(V)1.7 sodium channels via inhibition of glycogen synthase kinase-3 in adrenal chromaffin cells: enhancement of Na(+) influx, Ca(2+) influx and catecholamine secretion after lithium withdrawal.

PubMed

Yanagita, Toshihiko; Maruta, Toyoaki; Nemoto, Takayuki; Uezono, Yasuhito; Matsuo, Kiyotaka; Satoh, Shinya; Yoshikawa, Norie; Kanai, Tasuku; Kobayashi, Hideyuki; Wada, Akihiko

2009-09-01

In cultured bovine adrenal chromaffin cells expressing Na(V)1.7 isoform of voltage-dependent Na(+) channels, we have previously reported that lithium chloride (LiCl) inhibits function of Na(+) channels independent of glycogen synthase kinase-3 (GSK-3) (Yanagita et al., 2007). Here, we further examined the effects of chronic lithium treatment on Na(+) channels. LiCl treatment (1-30 mM, > or = 12 h) increased cell surface [(3)H]saxitoxin ([(3)H]STX) binding by approximately 32% without altering the affinity of [(3)H]STX binding. This increase was prevented by cycloheximide and actinomycin D. SB216763 and SB415286 (GSK-3 inhibitors) also increased cell surface [(3)H]STX binding by approximately 31%. Simultaneous treatment with LiCl and SB216763 or SB415286 did not produce an increased effect on [(3)H]STX binding compared with either treatment alone. LiCl increased Na(+) channel alpha-subunit mRNA level by 32% at 24 h. LiCl accelerated alpha-subunit gene transcription by 35% without altering alpha-subunit mRNA stability. In LiCl-treated cells, LiCl inhibited veratridine-induced (22)Na(+) influx as in untreated cells. However, washout of LiCl after chronic treatment enhanced veratridine-induced (22)Na(+) influx, (45)Ca(2+) influx and catecholamine secretion by approximately 30%. Washout of LiCl after 24 h treatment shifted concentration-response curve of veratridine upon (22)Na(+) influx upward, without altering its EC(50) value. Ptychodiscus brevis toxin-3 allosterically enhanced veratridine-induced (22)Na(+) influx by two-fold in untreated and LiCl-treated cells. Whole-cell patch-clamp analysis indicated that I-V curve and steady-state inactivation/activation curves were comparable between untreated and LiCl-treated cells. Thus, GSK-3 inhibition by LiCl up-regulated cell surface Na(V)1.7 via acceleration of alpha-subunit gene transcription, enhancing veratridine-induced Na(+) influx, Ca(2+) influx and catecholamine secretion.

Multiple scattering of waves in random media: Application to the study of the city-site effect in Mexico City area.

NASA Astrophysics Data System (ADS)

Ishizawa, O. A.; Clouteau, D.

2007-12-01

Long-duration, amplifications and spatial response's variability of the seismic records registered in Mexico City during the September 1985 earthquake cannot only be explained by the soil velocity model. We will try to explain these phenomena by studying the extent of the effect of buildings' diffracted wave fields during an earthquake. The main question is whether the presence of a large number of buildings can significantly modify the seismic wave field. We are interested in the interaction between the incident wave field propagating in a stratified half- space and a large number of structures at the free surface, i.e., the coupled city-site effect. We study and characterize the seismic wave propagation regimes in a city using the theory of wave propagation in random media. In the coupled city-site system, the buildings are modeled as resonant scatterers uniformly distributed at the surface of a deterministic, horizontally layered elastic half-space representing the soil. Based on the mean-field and the field correlation equations, we build a theoretical model which takes into account the multiple scattering of seismic waves and allows us to describe the coupled city-site system behavior in a simple and rapid way. The results obtained for the configurationally averaged field quantities are validated by means of 3D results for the seismic response of a deterministic model. The numerical simulations of this model are computed with MISS3D code based on classical Soil-Structure Interaction techniques and on a variational coupling between Boundary Integral Equations for a layered soil and a modal Finite Element approach for the buildings. This work proposes a detailed numerical and a theoretical analysis of the city-site interaction (CSI) in Mexico City area. The principal parameters in the study of the CSI are the buildings resonant frequency distribution, the soil characteristics of the site, the urban density and position of the buildings in the city, as well as

Modeling of Single Noninactivating Na+ Channels: Evidence for Two Open and Several Fast Inactivated States

PubMed Central

The, Yu-Kai; Fernandes, Jacqueline; Popa, M. Oana; Alekov, Alexi K.; Timmer, Jens; Lerche, Holger

2006-01-01

Voltage-gated Na+ channels play a fundamental role in the excitability of nerve and muscle cells. Defects in fast Na+ channel inactivation can cause hereditary muscle diseases with hyper- or hypoexcitability of the sarcolemma. To explore the kinetics and gating mechanisms of noninactivating muscle Na+ channels on a molecular level, we analyzed single channel currents from wild-type and five mutant Na+ channels. The mutations were localized in different protein regions which have been previously shown to be important for fast inactivation (D3-D4-linker, D3/S4-S5, D4/S4-S5, D4/S6) and exhibited distinct grades of defective fast inactivation with varying levels of persistent Na+ currents caused by late channel reopenings. Different gating schemes were fitted to the data using hidden Markov models with a correction for time interval omission and compared statistically. For all investigated channels including the wild-type, two open states were necessary to describe our data. Whereas one inactivated state was sufficient to fit the single channel behavior of wild-type channels, modeling the mutants with impaired fast inactivation revealed evidence for several inactivated states. We propose a single gating scheme with two open and three inactivated states to describe the behavior of all five examined mutants. This scheme provides a biological interpretation of the collected data, based on previous investigations in voltage-gated Na+ and K+ channels. PMID:16513781

Methods for Geometric Data Validation of 3d City Models

NASA Astrophysics Data System (ADS)

Wagner, D.; Alam, N.; Wewetzer, M.; Pries, M.; Coors, V.

2015-12-01

Geometric quality of 3D city models is crucial for data analysis and simulation tasks, which are part of modern applications of the data (e.g. potential heating energy consumption of city quarters, solar potential, etc.). Geometric quality in these contexts is however a different concept as it is for 2D maps. In the latter case, aspects such as positional or temporal accuracy and correctness represent typical quality metrics of the data. They are defined in ISO 19157 and should be mentioned as part of the metadata. 3D data has a far wider range of aspects which influence their quality, plus the idea of quality itself is application dependent. Thus, concepts for definition of quality are needed, including methods to validate these definitions. Quality on this sense means internal validation and detection of inconsistent or wrong geometry according to a predefined set of rules. A useful starting point would be to have correct geometry in accordance with ISO 19107. A valid solid should consist of planar faces which touch their neighbours exclusively in defined corner points and edges. No gaps between them are allowed, and the whole feature must be 2-manifold. In this paper, we present methods to validate common geometric requirements for building geometry. Different checks based on several algorithms have been implemented to validate a set of rules derived from the solid definition mentioned above (e.g. water tightness of the solid or planarity of its polygons), as they were developed for the software tool CityDoctor. The method of each check is specified, with a special focus on the discussion of tolerance values where they are necessary. The checks include polygon level checks to validate the correctness of each polygon, i.e. closeness of the bounding linear ring and planarity. On the solid level, which is only validated if the polygons have passed validation, correct polygon orientation is checked, after self-intersections outside of defined corner points and edges

Estimating greenhouse gas emissions of European cities--modeling emissions with only one spatial and one socioeconomic variable.

PubMed

Baur, Albert H; Lauf, Steffen; Förster, Michael; Kleinschmit, Birgit

2015-07-01

Substantive and concerted action is needed to mitigate climate change. However, international negotiations struggle to adopt ambitious legislation and to anticipate more climate-friendly developments. Thus, stronger actions are needed from other players. Cities, being greenhouse gas emission centers, play a key role in promoting the climate change mitigation movement by becoming hubs for smart and low-carbon lifestyles. In this context, a stronger linkage between greenhouse gas emissions and urban development and policy-making seems promising. Therefore, simple approaches are needed to objectively identify crucial emission drivers for deriving appropriate emission reduction strategies. In analyzing 44 European cities, the authors investigate possible socioeconomic and spatial determinants of urban greenhouse gas emissions. Multiple statistical analyses reveal that the average household size and the edge density of discontinuous dense urban fabric explain up to 86% of the total variance of greenhouse gas emissions of EU cities (when controlled for varying electricity carbon intensities). Finally, based on these findings, a multiple regression model is presented to determine greenhouse gas emissions. It is independently evaluated with ten further EU cities. The reliance on only two indicators shows that the model can be easily applied in addressing important greenhouse gas emission sources of European urbanites, when varying power generations are considered. This knowledge can help cities develop adequate climate change mitigation strategies and promote respective policies on the EU or the regional level. The results can further be used to derive first estimates of urban greenhouse gas emissions, if no other analyses are available. Copyright © 2015 Elsevier B.V. All rights reserved.

Under the pile. Understanding subsurface dynamics of historical cities trough geophysical models interpretation

NASA Astrophysics Data System (ADS)

Bernardes, Paulo; Pereira, Bruno; Alves, Mafalda; Fontes, Luís; Sousa, Andreia; Martins, Manuela; Magalhães, Fernanda; Pimenta, Mário

2017-04-01

Braga is one of the oldest cities of the Iberian NW and as of so, the research team's studying the city's historical core for the past 40 years is often confronted with the unpredictability factor laying beneath an urban site with such a long construction history. In fact, Braga keeps redesigning its urban structure over itself on for the past 2000 years, leaving us with a research object filled with an impressive set of construction footprints from the various planning decisions that were taken in the city along its historical path. Aiming for a predicting understanding of the subsoil, we have used near surface geophysics as an effort of minimizing the areas of intervention for traditional archaeological survey techniques. The Seminário de Santiago integrated geophysical survey is an example of the difficulties of interpreting geophysical models in very complex subsurface scenarios. This geophysical survey was planned in order to aid the requalification project being designed for this set of historical buildings, that are estimated to date back to the 16h century, and that were built over one of the main urban arteries of both roman and medieval layers of Braga. We have used both GPR as well as ERT methods for the geophysical survey, but for the purpose of this article, we will focus in the use of the ERT alone. For the interpretation of the geophysical models we've cross-referenced the dense knowledge existing over the building's construction phases with the complex geophysical data collected, using mathematical processing and volume-based visualization techniques, resorting to the use of Res2Inv©, Paraview© and Voxler® software's. At the same time we tried to pinpoint the noise caused by the past 30 year's infrastructural interventions regarding the replacement of the building's water and sanitation systems and for which we had no design plants, regardless of its recent occurring. The deep impact of this replacement actions revealed by the archaeological

[Calculation model of urban water resources ecological footprint and its application: a case study in Shenyang City of Northeast China].

PubMed

Wang, Jian; Zhang, Chao-Xing; Yu, Ying-Tan; Li, Fa-Yun; Ma, Fang

2012-08-01

Water resources ecological footprint can directly reflect the pressure of human social and economic activities to water resources, and provide important reference for the rational utilization of water resources. Based on the existing ecological footprint models and giving full consideration of the water resources need of urban ecological system, this paper established a new calculation model of urban water resources ecological footprint, including domestic water account, process water account, public service water account, and ecological water requirement account. According to the actual situation of Shenyang City, the key parameters of the model were determined, and the water resources ecological footprint and ecological carrying capacity of the City were calculated and analyzed. From 2000 to 2009, the water resources ecological footprint per capita of the City presented an overall decreasing trend, but still had an annual ecological deficit. As compared to that in 2000, the water resources ecological footprint per capita was decreased to 0.31 hm2 in 2005, increased slightly in 2006 and 2007, and remained stable in 2008 and 2009, which suggested that the sustainable utilization of water resources in Shenyang City had definite improvement, but was still in an unsustainable development situation.

Agent based models for testing city evacuation strategies under a flood event as strategy to reduce flood risk

NASA Astrophysics Data System (ADS)

Medina, Neiler; Sanchez, Arlex; Nokolic, Igor; Vojinovic, Zoran

2016-04-01

This research explores the uses of Agent Based Models (ABM) and its potential to test large scale evacuation strategies in coastal cities at risk from flood events due to extreme hydro-meteorological events with the final purpose of disaster risk reduction by decreasing human's exposure to the hazard. The first part of the paper corresponds to the theory used to build the models such as: Complex adaptive systems (CAS) and the principles and uses of ABM in this field. The first section outlines the pros and cons of using AMB to test city evacuation strategies at medium and large scale. The second part of the paper focuses on the central theory used to build the ABM, specifically the psychological and behavioral model as well as the framework used in this research, specifically the PECS reference model is cover in this section. The last part of this section covers the main attributes or characteristics of human beings used to described the agents. The third part of the paper shows the methodology used to build and implement the ABM model using Repast-Symphony as an open source agent-based modelling and simulation platform. The preliminary results for the first implementation in a region of the island of Sint-Maarten a Dutch Caribbean island are presented and discussed in the fourth section of paper. The results obtained so far, are promising for a further development of the model and its implementation and testing in a full scale city

Determinants of urban sprawl in European cities.

PubMed

Oueslati, Walid; Alvanides, Seraphim; Garrod, Guy

2015-07-01

This paper provides empirical evidence that helps to answer several key questions relating to the extent of urban sprawl in Europe. Building on the monocentric city model, this study uses existing data sources to derive a set of panel data for 282 European cities at three time points (1990, 2000 and 2006). Two indices of urban sprawl are calculated that, respectively, reflect changes in artificial area and the levels of urban fragmentation for each city. These are supplemented by a set of data on various economic and geographical variables that might explain the variation of the two indices. Using a Hausman-Taylor estimator and random regressors to control for the possible correlation between explanatory variables and unobservable city-level effects, we find that the fundamental conclusions of the standard monocentric model are valid in the European context for both indices. Although the variables generated by the monocentric model explain a large part of the variation of artificial area, their explanatory power for modelling the fragmentation index is relatively low.

Determinants of urban sprawl in European cities

PubMed Central

Alvanides, Seraphim; Garrod, Guy

2015-01-01

This paper provides empirical evidence that helps to answer several key questions relating to the extent of urban sprawl in Europe. Building on the monocentric city model, this study uses existing data sources to derive a set of panel data for 282 European cities at three time points (1990, 2000 and 2006). Two indices of urban sprawl are calculated that, respectively, reflect changes in artificial area and the levels of urban fragmentation for each city. These are supplemented by a set of data on various economic and geographical variables that might explain the variation of the two indices. Using a Hausman-Taylor estimator and random regressors to control for the possible correlation between explanatory variables and unobservable city-level effects, we find that the fundamental conclusions of the standard monocentric model are valid in the European context for both indices. Although the variables generated by the monocentric model explain a large part of the variation of artificial area, their explanatory power for modelling the fragmentation index is relatively low. PMID:26321770

22. Photocopied from Photo 505OLM, Olmstead Folder #1, Engineering Department, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. Photocopied from Photo 505-OLM, Olmstead Folder #1, Engineering Department, Utah Power & Light Co., Salt Lake City, Utah. OLD PENSTOCKS, JANUARY 25, 1908. - Telluride Power Company, Olmsted Hydroelectric Plant, mouth of Provo River Canyon West of U.S. Route 189, Orem, Utah County, UT

Interaction between Cities and Climate Change: Modelling Urban Morphology and Local Urban Planning Scenarios from Open Datasets across European Cities

NASA Astrophysics Data System (ADS)

Thomas, Bart; Stevens, Catherine; Grommen, Mart

2015-04-01

Cities are characterised by a large spatiotemporal diversity of local climates induced by a superposition of various factors and processes interacting at global and regional scales but also at the micro level such as the urban heat island effect. As urban areas are known as 'hot spots' prone to climate and its variability over time leading to changes in the severity and occurrence of extreme events such as heat waves, it is of crucial importance to capture the spatial heterogeneity resulting from variations in land use land cover (LULC) and urban morphology in an effective way to drive local urban climate simulations. The first part of the study conducted in the framework of the NACLIM FP7 project funded by the European Commission focusses on the extraction of land surface parameters linked to urban morphology characteristics from detailed 3D city models and their relationship with openly accessible European datasets such as the degree of soil sealing and disaggregated population densities from the European Environment Agency (EEA) and the Joint Research Centre (JRC). While it has been demonstrated that good correlations can be found between those datasets and the planar and frontal area indices, the present work has expanded the research to other urban morphology parameters including the average and variation of the building height and the sky view factor. Correlations up to 80% have been achieved depending on the considered parameter and the specific urban area including the cities of Antwerp (Belgium), Berlin (Germany) and Almada (Portugal) represented by different climate and urban characteristics. Moreover, the transferability of the established relations has been investigated across the various cities. Secondly, a flexible and scalable approach as a function of the required the level of detail has been elaborated to update the various morphology parameters in case of integration with urban planning data to analyse the local impact of future land use scenarios

Mathematics and morphogenesis of cities: A geometrical approach

NASA Astrophysics Data System (ADS)

Courtat, Thomas; Gloaguen, Catherine; Douady, Stephane

2011-03-01

Cities are living organisms. They are out of equilibrium, open systems that never stop developing and sometimes die. The local geography can be compared to a shell constraining its development. In brief, a city’s current layout is a step in a running morphogenesis process. Thus cities display a huge diversity of shapes and none of the traditional models, from random graphs, complex networks theory, or stochastic geometry, takes into account the geometrical, functional, and dynamical aspects of a city in the same framework. We present here a global mathematical model dedicated to cities that permits describing, manipulating, and explaining cities’ overall shape and layout of their street systems. This street-based framework conciliates the topological and geometrical sides of the problem. From the static analysis of several French towns (topology of first and second order, anisotropy, streets scaling) we make the hypothesis that the development of a city follows a logic of division or extension of space. We propose a dynamical model that mimics this logic and that, from simple general rules and a few parameters, succeeds in generating a large diversity of cities and in reproducing the general features the static analysis has pointed out.

An isopiestic study of aqueous NaBr and KBr at 50 °C: Chemical equilibrium model of solution behavior and solubility in the NaBr-H 2O, KBr-H 2O and Na-K-Br-H 2O systems to high concentration and temperature

NASA Astrophysics Data System (ADS)

Christov, Christomir

2007-07-01

The isopiestic method has been used to determine the osmotic coefficients of the binary solutions NaBr-H 2O (from 0.745 to 5.953 mol kg -1) and KBr-H 2O (from 0.741 to 5.683 mol kg -1) at the temperature t = 50 °C. Sodium chloride solutions have been used as isopiestic reference standards. The isopiestic results obtained have been combined with all other experimental thermodynamic quantities available in literature (osmotic coefficients, water activities, bromide mineral's solubilities) to construct a chemical model that calculates solute and solvent activities and solid-liquid equilibria in the NaBr-H 2O, KBr-H 2O and Na-K-Br-H 2O systems from dilute to high solution concentration within the 0-300 °C temperature range. The Harvie and Weare [Harvie C., and Weare J. (1980) The prediction of mineral solubilities in naturalwaters: the Na-K-Mg-Ca-Cl-SO 4-H 2O system from zero to high concentration at 25 °C. Geochim. Cosmochim. Acta44, 981-997] solubility modeling approach, incorporating their implementation of the concentration-dependent specific interaction equations of Pitzer [Pitzer K. (1973) Thermodynamics of electrolytes. I. Theoretical basis and general equations. J. Phys. Chem.77, 268-277] is employed. The model for binary systems is validated by comparing activity coefficient predictions with those given in literature, and not used in the parameterization process. Limitations of the mixed solutions model due to data insufficiencies are discussed. This model expands the variable temperature sodium-potassium model of Greenberg and Moller [Greenberg J., and Moller N. (1989) The prediction of mineral solubilities in natural waters: a chemical equilibrium model for the Na-K-Ca-Cl-SO 4-H 2O system to high concentration from 0 to 250 °C. Geochim. Cosmochim. Acta53, 2503-2518] by evaluating Br - pure electrolyte and mixing solution parameters and the chemical potentials of three bromide solid phases: NaBr-2H 2O (cr), NaBr (cr) and KBr (cr).

[Urban greenbelt eco-service value of Hangzhou City under effects of land use change: an evaluation with CITYgreen model].

PubMed

Zhang, Kan; Zhang, Jianying; Chen, Yingxu; Zhu, Yinmei

2006-10-01

Based on the Landset TM information of land use/cover change and greenbelt distribution in Hangzhou city in 1994 and 2004, and by using CITYgreen model, this paper estimated the eco-service value of urban greenbelt in the city under the effects of land use change and economic development. The results showed that in the 10 years from 1994 to 2004, the greenbelt area in the city decreased by 20. 4% , while its eco-service value increased by 168 million yuan. The annual increment of greenbelt eco-service value and GDP was 111.92% and 5. 32% , respectively. Suitable adjustment of land use pattern in the city harmonized the relationships between urban economic development and urban eco-function, and achieved higher eco-service efficiency of land utilization.

Evaluation of Land Use Regression Models for Nitrogen Dioxide and Benzene in Four US Cities

PubMed Central

Mukerjee, Shaibal; Smith, Luther; Neas, Lucas; Norris, Gary

2012-01-01

Spatial analysis studies have included the application of land use regression models (LURs) for health and air quality assessments. Recent LUR studies have collected nitrogen dioxide (NO2) and volatile organic compounds (VOCs) using passive samplers at urban air monitoring networks in El Paso and Dallas, TX, Detroit, MI, and Cleveland, OH to assess spatial variability and source influences. LURs were successfully developed to estimate pollutant concentrations throughout the study areas. Comparisons of development and predictive capabilities of LURs from these four cities are presented to address this issue of uniform application of LURs across study areas. Traffic and other urban variables were important predictors in the LURs although city-specific influences (such as border crossings) were also important. In addition, transferability of variables or LURs from one city to another may be problematic due to intercity differences and data availability or comparability. Thus, developing common predictors in future LURs may be difficult. PMID:23226985

R package CityWaterBalance | Science Inventory | US EPA

EPA Pesticide Factsheets

CityWaterBalance provides a reproducible workflow for studying an urban water system. The network of urban water flows and storages can be modeled and visualized. Any city may be modeled with preassembled data, but data for US cities can be gathered via web services using this package and dependencies, geoknife and dataRetrieval. Urban water flows are difficult to comprehensively quantify. Although many important data sources are openly available, they are published by a variety of agencies in different formats, units, spatial and temporal resolutions. Increasingly, open data are made available via web services, which allow for automated, current retrievals. Integrating data streams and estimating the values of unmeasured urban water flows, however, remains needlessly time-consuming. In order to streamline a reproducible analysis, we have developed the CityWaterBalance package for the open source R language. The CityWaterBalance package for R is based on a simple model of the network of urban water flows and storages. The model may be run with data that has been pre-assembled by the user, or data can be retrieved by functions in CityWaterBalance and dependencies. CityWaterBalance can be used to quickly assemble a quantitative portrait of any urban water system. The systemic effects of water management decisions can be readily explored. Much of the data acquisition process for US cities can already be automated, while the package serves as a place-hold

Sinking Coastal Cities

NASA Astrophysics Data System (ADS)

Erkens, G.; Stuurman, R.; De Lange, G.; Bucx, T.; Lambert, J.

2014-12-01

In many coastal cities land subsidence now exceeds absolute sea level rise up to a factor of ten. Without action, parts of Jakarta, Ho Chi Minh City, Bangkok and numerous other coastal cities will continue to sink, even below sea level. The ever increasing industrial and domestic demand for water in these cities results in excessive groundwater extraction, causing severe subsidence. In addition, coastal cities are often faced with larger natural subsidence, as they are built on thick sequences of soft soil. The impacts of subsidence are further exacerbated by climate-induced sea level rise. Land subsidence results in two types damage: foremost it increases flood vulnerability (frequency, inundation depth and duration of floods), with floods causing major economic damage and loss of lives. Secondly, differential land movement causes significant economic losses in the form of structural damage and high maintenance costs of roads and transportation networks, sewage systems, buildings and foundations. The total damage worldwide is estimated at billions of dollars annually. To survey the extent of groundwater associated subsidence, we conducted a quick-assessment of subsidence in a series of mega-cities (Jakarta, Ho Chi Minh City, Dhaka, New Orleans and Bangkok). For each city research questions included: what are the main causes, how much is the current subsidence rate and what are predictions, where are the vulnerable areas, what are the impacts and risks, how can adverse impacts can be mitigated or compensated for, and what governmental bodies are involved and responsible to act? Using the assessment, this paper discusses subsidence modelling and measurement results from the selected cities. The focus is on the importance of delayed settlement after increases in hydraulic heads, the role of the subsurface composition for subsidence rates and best practice solutions for subsiding cities. For the latter, urban (ground)water management, adaptive flood risk management

The Romanian contribution to the COST action TU0801 "Semantic enrichment of 3D city models for sustainable urban development"

NASA Astrophysics Data System (ADS)

Armas, Iuliana; Bostenaru Dan, Maria

2010-05-01

The COST action TU0801 "Semantic enrichment of 3D city models for sustainable urban development" aims at using ontologies to enrich three dimensional models of cities. Such models can be used for various purposes, one of them being disaster management. COST actions are European networks of nationally funded projects, the European Science Foundation funding the networking activities. Romania adhered to the above mentioned COST action in 2009, the nationally funded project being concerned with the use of GIS for the vulnerability to hazards of the city of Bucharest. Among the networking activites Romanian representatives participated in are a training school on 3D GIS for disaster management (with two trainees) and a working group and management committee meeting. It is aimed to further develop the issues of usability and guidance of semantically enriched city models as task from the working group within the Action for the nationally funded project. In this contribution there will be shown how it is aimed to achieve this. One of the issues is on how to extrude GIS to achieve a simple 3D representation for a pilot area in the historic centre of Bucharest. Another one is on how to use this for the study of urbanism aspects, ranging from visual urban composition to the complex 3D aspects in restoration projects, including addition of new floors to buildings.

Multiple Statistical Models Based Analysis of Causative Factors and Loess Landslides in Tianshui City, China

NASA Astrophysics Data System (ADS)

Su, Xing; Meng, Xingmin; Ye, Weilin; Wu, Weijiang; Liu, Xingrong; Wei, Wanhong

2018-03-01

Tianshui City is one of the mountainous cities that are threatened by severe geo-hazards in Gansu Province, China. Statistical probability models have been widely used in analyzing and evaluating geo-hazards such as landslide. In this research, three approaches (Certainty Factor Method, Weight of Evidence Method and Information Quantity Method) were adopted to quantitively analyze the relationship between the causative factors and the landslides, respectively. The source data used in this study are including the SRTM DEM and local geological maps in the scale of 1:200,000. 12 causative factors (i.e., altitude, slope, aspect, curvature, plan curvature, profile curvature, roughness, relief amplitude, and distance to rivers, distance to faults, distance to roads, and the stratum lithology) were selected to do correlation analysis after thorough investigation of geological conditions and historical landslides. The results indicate that the outcomes of the three models are fairly consistent.

[Prevalence of domestic violence in the city of Durango].

PubMed

Alvarado-Zaldívar, G; Salvador-Moysén, J; Estrada-Martínez, S; Terrones-González, A

1998-01-01

To characterize and determine the prevalence of the different types of gender-associated violence in the city of Durango, Mexico. With a transversal design, 384 women residents of the city of Durango, either living with or having lived with someone before, were interviewed. The sample was proportionately distributed in 6 city sectors which were randomly chosen and representative of the high middle and low socioeconomic levels. Sixty-four interviews were conducted in each city sector. The questionnaire consisted of 184 closed and 22 open questions, including identification, sociodemographic and reproductive data, as well as specific questions on physical, emotional and sexual violence. Median age of the studied group was 41.5 years, ranging from 12 to 48 years. Prevalence of domestic violence was: sexual 42%; physical 40%; emotional 39%. The problem of violence, in its different forms, is a highly prevalent factor which jeopardizes the welfare of the family nucleus. Higher prevalence values of domestic violence were detected in the presence of factors such as violence antecedents, alcoholism and/or drug consumption by some member of the family.

Optimization of seasonal ARIMA models using differential evolution - simulated annealing (DESA) algorithm in forecasting dengue cases in Baguio City

NASA Astrophysics Data System (ADS)

Addawe, Rizavel C.; Addawe, Joel M.; Magadia, Joselito C.

2016-10-01

Accurate forecasting of dengue cases would significantly improve epidemic prevention and control capabilities. This paper attempts to provide useful models in forecasting dengue epidemic specific to the young and adult population of Baguio City. To capture the seasonal variations in dengue incidence, this paper develops a robust modeling approach to identify and estimate seasonal autoregressive integrated moving average (SARIMA) models in the presence of additive outliers. Since the least squares estimators are not robust in the presence of outliers, we suggest a robust estimation based on winsorized and reweighted least squares estimators. A hybrid algorithm, Differential Evolution - Simulated Annealing (DESA), is used to identify and estimate the parameters of the optimal SARIMA model. The method is applied to the monthly reported dengue cases in Baguio City, Philippines.

[Adaptability of APSIM model in Southwestern China: A case study of winter wheat in Chongqing City].

PubMed

Dai, Tong; Wang, Jing; He, Di; Zhang, Jian-ping; Wang, Na

2015-04-01

Field experimental data of winter wheat and parallel daily meteorological data at four typical stations in Chongqing City were used to calibrate and validate APSIM-wheat model and determine the genetic parameters for 12 varieties of winter wheat. The results showed that there was a good agreement between the simulated and observed growth periods from sowing to emergence, flowering and maturity of wheat. Root mean squared errors (RMSEs) between simulated and observed emergence, flowering and maturity were 0-3, 1-8, and 0-8 d, respectively. Normalized root mean squared errors (NRMSEs) between simulated and observed above-ground biomass for 12 study varieties were less than 30%. NRMSE between simulated and observed yields for 10 varieties out of 12 study varieties were less than 30%. APSIM-wheat model performed well in simulating phenology, aboveground biomass and yield of winter wheat in Chongqing City, which could provide a foundational support for assessing the impact of climate change on wheat production in the study area based on the model.

Defining Sexuality among Female Black Inner-City Young Adolescents.

ERIC Educational Resources Information Center

Gershenson, Harold P.; Handler, Arden

Adolescents are able to respond correctly to questions about pregnancy risk and contraceptive use, yet still engage in risk-taking behavior. One explanation for this phenomenon may be the existence of a personal fable. To explore the existence of the personal fable in inner-city female adolescents, 22 eighth grade black females in Chicago…

Cultural Heritage in Smart City Environments

NASA Astrophysics Data System (ADS)

Angelidou, M.; Karachaliou, E.; Angelidou, T.; Stylianidis, E.

2017-08-01

This paper investigates how the historical and cultural heritage of cities is and can be underpinned by means of smart city tools, solutions and applications. Smart cities stand for a conceptual technology-and-innovation driven urban development model. By becoming `smart', cities seek to achieve prosperity, effectiveness and competitiveness on multiple socio-economic levels. Although cultural heritage is one of the many issues addressed by existing smart city strategies, and despite the documented bilateral benefits, our research about the positioning of urban cultural heritage within three smart city strategies (Barcelona, Amsterdam, and London) reveals fragmented approaches. Our findings suggest that the objective of cultural heritage promotion is not substantially addressed in the investigated smart city strategies. Nevertheless, we observe that cultural heritage management can be incorporated in several different strategic areas of the smart city, reflecting different lines of thinking and serving an array of goals, depending on the case. We conclude that although potential applications and approaches abound, cultural heritage currently stands for a mostly unexploited asset, presenting multiple integration opportunities within smart city contexts. We prompt for further research into bridging the two disciplines and exploiting a variety of use cases with the purpose of enriching the current knowledge base at the intersection of cultural heritage and smart cities.

Investigating the capabilities of semantic enrichment of 3D CityEngine data

NASA Astrophysics Data System (ADS)

Solou, Dimitra; Dimopoulou, Efi

2016-08-01

In recent years the development of technology and the lifting of several technical limitations, has brought the third dimension to the fore. The complexity of urban environments and the strong need for land administration, intensify the need of using a three-dimensional cadastral system. Despite the progress in the field of geographic information systems and 3D modeling techniques, there is no fully digital 3D cadastre. The existing geographic information systems and the different methods of three-dimensional modeling allow for better management, visualization and dissemination of information. Nevertheless, these opportunities cannot be totally exploited because of deficiencies in standardization and interoperability in these systems. Within this context, CityGML was developed as an international standard of the Open Geospatial Consortium (OGC) for 3D city models' representation and exchange. CityGML defines geometry and topology for city modeling, also focusing on semantic aspects of 3D city information. The scope of CityGML is to reach common terminology, also addressing the imperative need for interoperability and data integration, taking into account the number of available geographic information systems and modeling techniques. The aim of this paper is to develop an application for managing semantic information of a model generated based on procedural modeling. The model was initially implemented in CityEngine ESRI's software, and then imported to ArcGIS environment. Final goal was the original model's semantic enrichment and then its conversion to CityGML format. Semantic information management and interoperability seemed to be feasible by the use of the 3DCities Project ESRI tools, since its database structure ensures adding semantic information to the CityEngine model and therefore automatically convert to CityGML for advanced analysis and visualization in different application areas.

22 CFR 11.3 - Oral examination for appointment to class 7 or 8.

Code of Federal Regulations, 2010 CFR

2010-04-01

... oral examination will be given throughout the year at Washington and periodically in selected cities in... Government of the United States and attachment to the principles of the Constitution. (22 U.S.C. 1221 et seq...

Characterizing the relationship between temperature and mortality in tropical and subtropical cities: a distributed lag non-linear model analysis in Hue, Viet Nam, 2009–2013

PubMed Central

Dang, Tran Ngoc; Seposo, Xerxes T.; Duc, Nguyen Huu Chau; Thang, Tran Binh; An, Do Dang; Hang, Lai Thi Minh; Long, Tran Thanh; Loan, Bui Thi Hong; Honda, Yasushi

2016-01-01

Background The relationship between temperature and mortality has been found to be U-, V-, or J-shaped in developed temperate countries; however, in developing tropical/subtropical cities, it remains unclear. Objectives Our goal was to investigate the relationship between temperature and mortality in Hue, a subtropical city in Viet Nam. Design We collected daily mortality data from the Vietnamese A6 mortality reporting system for 6,214 deceased persons between 2009 and 2013. A distributed lag non-linear model was used to examine the temperature effects on all-cause and cause-specific mortality by assuming negative binomial distribution for count data. We developed an objective-oriented model selection with four steps following the Akaike information criterion (AIC) rule (i.e. a smaller AIC value indicates a better model). Results High temperature-related mortality was more strongly associated with short lags, whereas low temperature-related mortality was more strongly associated with long lags. The low temperatures increased risk in all-category mortality compared to high temperatures. We observed elevated temperature-mortality risk in vulnerable groups: elderly people (high temperature effect, relative risk [RR]=1.42, 95% confidence interval [CI]=1.11–1.83; low temperature effect, RR=2.0, 95% CI=1.13–3.52), females (low temperature effect, RR=2.19, 95% CI=1.14–4.21), people with respiratory disease (high temperature effect, RR=2.45, 95% CI=0.91–6.63), and those with cardiovascular disease (high temperature effect, RR=1.6, 95% CI=1.15–2.22; low temperature effect, RR=1.99, 95% CI=0.92–4.28). Conclusions In Hue, the temperature significantly increased the risk of mortality, especially in vulnerable groups (i.e. elderly, female, people with respiratory and cardiovascular diseases). These findings may provide a foundation for developing adequate policies to address the effects of temperature on health in Hue City. PMID:26781954

Learning Cities as Healthy Green Cities: Building Sustainable Opportunity Cities

ERIC Educational Resources Information Center

Kearns, Peter

2012-01-01

This paper discusses a new generation of learning cities we have called EcCoWell cities (Economy, Community, Well-being). The paper was prepared for the PASCAL International Exchanges (PIE) and is based on international experiences with PIE and developments in some cities. The paper argues for more holistic and integrated development so that…

Critical modeling parameters identified for 3D CFD modeling of rectangular final settling tanks for New York City wastewater treatment plants.

PubMed

Ramalingam, K; Xanthos, S; Gong, M; Fillos, J; Beckmann, K; Deur, A; McCorquodale, J A

2012-01-01

New York City Environmental Protection is in the process of incorporating biological nitrogen removal (BNR) in its wastewater treatment plants (WWTPs) which entails operating the aeration tanks with higher levels of mixed liquor suspended solids (MLSS) than a conventional activated sludge process. The objective of this paper is to discuss two of the important parameters introduced in the 3D CFD model that has been developed by the City College of New York (CCNY) group: (a) the development of the 'discrete particle' measurement technique to carry out the fractionation of the solids in the final settling tank (FST) which has critical implications in the prediction of the effluent quality; and (b) the modification of the floc aggregation (K(A)) and floc break-up (K(B)) coefficients that are found in Parker's flocculation equation (Parker et al. 1970, 1971) used in the CFD model. The dependence of these parameters on the predictions of the CFD model will be illustrated with simulation results on one of the FSTs at the 26th Ward WWTP in Brooklyn, NY.

Understanding the City Size Wage Gap*

PubMed Central

Baum-Snow, Nathaniel; Pavan, Ronni

2013-01-01

In this paper, we decompose city size wage premia into various components. We base these decompositions on an estimated on-the-job search model that incorporates latent ability, search frictions, firm-worker match quality, human capital accumulation and endogenous migration between large, medium and small cities. Counterfactual simulations of the model indicate that variation in returns to experience and differences in wage intercepts across location type are the most important mechanisms contributing to observed city size wage premia. Variation in returns to experience is more important for generating wage premia between large and small locations while differences in wage intercepts are more important for generating wage premia betwen medium and small locations. Sorting on unobserved ability within education group and differences in labor market search frictions and distributions of firm-worker match quality contribute little to observed city size wage premia. These conclusions hold for separate samples of high school and college graduates. PMID:24273347

Understanding the City Size Wage Gap.

PubMed

Baum-Snow, Nathaniel; Pavan, Ronni

2012-01-01

In this paper, we decompose city size wage premia into various components. We base these decompositions on an estimated on-the-job search model that incorporates latent ability, search frictions, firm-worker match quality, human capital accumulation and endogenous migration between large, medium and small cities. Counterfactual simulations of the model indicate that variation in returns to experience and differences in wage intercepts across location type are the most important mechanisms contributing to observed city size wage premia. Variation in returns to experience is more important for generating wage premia between large and small locations while differences in wage intercepts are more important for generating wage premia betwen medium and small locations. Sorting on unobserved ability within education group and differences in labor market search frictions and distributions of firm-worker match quality contribute little to observed city size wage premia. These conclusions hold for separate samples of high school and college graduates.

Competence skills help deter smoking among inner city adolescents

PubMed Central

Epstein, J.; Griffin, K.; Botvin, G.

2000-01-01

OBJECTIVE—To test whether higher levels of general competence are linked to more frequent use of refusal assertiveness that is in turn related to less subsequent smoking among inner city adolescents.
METHODS—Longitudinal study conducted during three year middle school or junior high school period. A sample of 1459 students attending 22 middle (ages 11-14 years) and junior high (ages 12-15 years) schools in New York City participated. Students completed surveys at baseline, one year follow up, and two year follow up. The students self reported smoking, decision making skills, personal efficacy, and refusal assertiveness. Teams of three to five data collectors administered the questionnaire following a standardised protocol. These data were collected in school during a regular 40 minute class period.
RESULTS—Based on the tested structural equation model, decision making and personal efficacy (that is, general competence) predicted higher refusal assertiveness and this greater assertiveness predicted less smoking at the two year follow up. The tested model had a good fit and was parsimonious and consistent with theory.
CONCLUSIONS—Adolescent smoking prevention programmes often teach refusal skills in order to help youth resist peer pressure to smoke. The present findings suggest that teaching general competence skills as well may help to reduce smoking because youth with better personal efficacy and decision making skills are better able to implement smoking refusal strategies.


Keywords: adolescent smoking; competence skills; refusal assertiveness; peer pressure PMID:10691756

Population-Area Relationship for Medieval European Cities

PubMed Central

Lobo, José; Bettencourt, Luís M. A.; Ortman, Scott G.; Smith, Michael E.

2016-01-01

Medieval European urbanization presents a line of continuity between earlier cities and modern European urban systems. Yet, many of the spatial, political and economic features of medieval European cities were particular to the Middle Ages, and subsequently changed over the Early Modern Period and Industrial Revolution. There is a long tradition of demographic studies estimating the population sizes of medieval European cities, and comparative analyses of these data have shed much light on the long-term evolution of urban systems. However, the next step—to systematically relate the population size of these cities to their spatial and socioeconomic characteristics—has seldom been taken. This raises a series of interesting questions, as both modern and ancient cities have been observed to obey area-population relationships predicted by settlement scaling theory. To address these questions, we analyze a new dataset for the settled area and population of 173 European cities from the early fourteenth century to determine the relationship between population and settled area. To interpret this data, we develop two related models that lead to differing predictions regarding the quantitative form of the population-area relationship, depending on the level of social mixing present in these cities. Our empirical estimates of model parameters show a strong densification of cities with city population size, consistent with patterns in contemporary cities. Although social life in medieval Europe was orchestrated by hierarchical institutions (e.g., guilds, church, municipal organizations), our results show no statistically significant influence of these institutions on agglomeration effects. The similarities between the empirical patterns of settlement relating area to population observed here support the hypothesis that cities throughout history share common principles of organization that self-consistently relate their socioeconomic networks to structured urban spaces. PMID

Population-Area Relationship for Medieval European Cities.

PubMed

Cesaretti, Rudolf; Lobo, José; Bettencourt, Luís M A; Ortman, Scott G; Smith, Michael E

2016-01-01

Medieval European urbanization presents a line of continuity between earlier cities and modern European urban systems. Yet, many of the spatial, political and economic features of medieval European cities were particular to the Middle Ages, and subsequently changed over the Early Modern Period and Industrial Revolution. There is a long tradition of demographic studies estimating the population sizes of medieval European cities, and comparative analyses of these data have shed much light on the long-term evolution of urban systems. However, the next step-to systematically relate the population size of these cities to their spatial and socioeconomic characteristics-has seldom been taken. This raises a series of interesting questions, as both modern and ancient cities have been observed to obey area-population relationships predicted by settlement scaling theory. To address these questions, we analyze a new dataset for the settled area and population of 173 European cities from the early fourteenth century to determine the relationship between population and settled area. To interpret this data, we develop two related models that lead to differing predictions regarding the quantitative form of the population-area relationship, depending on the level of social mixing present in these cities. Our empirical estimates of model parameters show a strong densification of cities with city population size, consistent with patterns in contemporary cities. Although social life in medieval Europe was orchestrated by hierarchical institutions (e.g., guilds, church, municipal organizations), our results show no statistically significant influence of these institutions on agglomeration effects. The similarities between the empirical patterns of settlement relating area to population observed here support the hypothesis that cities throughout history share common principles of organization that self-consistently relate their socioeconomic networks to structured urban spaces.

Beyond Rehabilitation: The Federal City College Lorton Project--A Model Prison Higher Education Program

ERIC Educational Resources Information Center

Taylor, Andress

1974-01-01

A description and evaluation of the Federal City College (the first Urban Land Grant institution in the nation) higher education program offered in association with a group of Washington, D.C., penal institutions located in Lorton, Virginia. This Lorton Project has been adopted as a National Model by the Department of Health, Education, and…

Short term association between ambient air pollution and mortality and modification by temperature in five Indian cities

NASA Astrophysics Data System (ADS)

Dholakia, Hem H.; Bhadra, Dhiman; Garg, Amit

2014-12-01

Indian cities are among the most polluted areas globally, yet assessments of short term mortality impacts due to pollution have been limited. Furthermore, studies examining temperature - pollution interactions on mortality are largely absent. Addressing this gap remains important in providing research evidence to better link health outcomes and air quality standards for India. Daily all-cause mortality, temperature, humidity and particulate matter less than 10 microns (PM10) data were collected for five cities - Ahmedabad, Bangalore, Hyderabad, Mumbai and Shimla spanning 2005-2012. Poisson regression models were developed to study short term impacts of PM10 as well as temperature - pollution interactions on daily all-cause mortality. We find that excess risk of mortality associated with a 10 μg/m3 PM10 increase is highest for Shimla (1.36%, 95% CI = -0.38%-3.1%) and the least for Ahmedabad (0.16%, 95% CI = -0.31%-0.62%). The corresponding values for Bangalore, Hyderabad and Mumbai are 0.22% (-0.04%-0.49%), 0.85% (0.06%-1.63%) and 0.2% (0.1%-0.3%) respectively. The relative health benefits of reducing pollution are higher for cleaner cities (Shimla) as opposed to dirtier cities (Mumbai). Overall we find that temperature and pollution interactions do not significantly impact mortality for the cities studied. This is one of the first multi-city studies that assess heterogeneity of air pollution impacts and possible modification due to temperature in Indian cities that are spread across climatic regions and topographies. Our findings highlight the need for pursuing stringent pollution control policies in Indian cities to minimize health impacts.

Design of high-rise dwelling houses for Ho Chi Minh City within the framework of the "smart city" concept

NASA Astrophysics Data System (ADS)

Loan, Nguyen Hong; Van Tin, Nguyen

2018-03-01

There are differences in the concepts of smart cities, which are reflected in many ideas and solutions. Globally one of the similarities of the goals for achieving smart cities is sustainable developmentwith the provision of best living conditions for people beingthe first priority. Ho Chi Minh City is not out of trend, taking the planning steps for the goal of becoming a smart city. It is necessary that design and construction of high-rise dwelling houses meet the criteria of "smart city" concept. This paper explores the design of high-rise dwelling houses forHo Chi Minh City with regards tothe framework of "smart city" concept. Methods used in the paper includedata collection, analytical - synthetical and modeling method.In order to proposedesign tasks and solutions of high-rise dwelling houses forHo Chi Minh Cityinthe concept "smart city"in the current period and near future, we present new approach, whichcan alsobe applied in practice for different cities in Vietnam.Moveover, it can also establishinformation resources, which areuseful in connecting and promotingfurther development for the success of a "smart city" program.

LINC Modeling of August 19, 2004 Queen City Barrel Company Fire In Cincinnati, OH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dillon, M B; Nasstrom, J S; Baskett, R L

This report details the information received, assumptions made, actions taken, and products delivered by the Lawrence Livermore National Laboratory (LLNL) during the August 19, 2004 fire at the Queen City Barrel Company (QCB) in Cincinnati, OH. During the course of the event, LLNL provided four sets of plume model products to various Cincinnati emergency response organizations.

Towards a comprehensive city emission function (CCEF)

NASA Astrophysics Data System (ADS)

Kocifaj, Miroslav

2018-01-01

The comprehensive city emission function (CCEF) is developed for a heterogeneous light-emitting or blocking urban environments, embracing any combination of input parameters that characterize linear dimensions in the system (size and distances between buildings or luminaires), properties of light-emitting elements (such as luminous building façades and street lighting), ground reflectance and total uplight-fraction, all of these defined for an arbitrarily sized 2D area. The analytical formula obtained is not restricted to a single model class as it can capture any specific light-emission feature for wide range of cities. The CCEF method is numerically fast in contrast to what can be expected of other probabilistic approaches that rely on repeated random sampling. Hence the present solution has great potential in light-pollution modeling and can be included in larger numerical models. Our theoretical findings promise great progress in light-pollution modeling as this is the first time an analytical solution to city emission function (CEF) has been developed that depends on statistical mean size and height of city buildings, inter-building separation, prevailing heights of light fixtures, lighting density, and other factors such as e.g. luminaire light output and light distribution, including the amount of uplight, and representative city size. The model is validated for sensitivity and specificity pertinent to combinations of input parameters in order to test its behavior under various conditions, including those that can occur in complex urban environments. It is demonstrated that the solution model succeeds in reproducing a light emission peak at some elevated zenith angles and is consistent with reduced rather than enhanced emission in directions nearly parallel to the ground.

The Use of Remote Sensing Data for Modeling Air Quality in the Cities

NASA Astrophysics Data System (ADS)

Putrenko, V. V.; Pashynska, N. M.

2017-12-01

Monitoring of environmental pollution in the cities by the methods of remote sensing of the Earth is actual area of research for sustainable development. Ukraine has a poorly developed network of monitoring stations for air quality, the technical condition of which is deteriorating in recent years. Therefore, the possibility of obtaining data about the condition of air by remote sensing methods is of great importance. The paper considers the possibility of using the data about condition of atmosphere of the project AERONET to assess the air quality in Ukraine. The main pollution indicators were used data on fine particulate matter (PM2.5) and nitrogen dioxide (NO2) content in the atmosphere. The main indicator of air quality in Ukraine is the air pollution index (API). We have built regression models the relationship between indicators of NO2, which are measured by remote sensing methods and ground-based measurements of indicators. There have also been built regression models, the relationship between the data given to the land of NO2 and API. To simulate the relationship between the API and PM2.5 were used geographically weighted regression model, which allows to take into account the territorial differentiation between these indicators. As a result, the maps that show the distribution of the main types of pollution in the territory of Ukraine, were constructed. PM2.5 data modeling is complicated with using existing indicators, which requires a separate organization observation network for PM2.5 content in the atmosphere for sustainable development in cities of Ukraine.

A validated model for the 22-item Sino-Nasal Outcome Test subdomain structure in chronic rhinosinusitis.

PubMed

Feng, Allen L; Wesely, Nicholas C; Hoehle, Lloyd P; Phillips, Katie M; Yamasaki, Alisa; Campbell, Adam P; Gregorio, Luciano L; Killeen, Thomas E; Caradonna, David S; Meier, Josh C; Gray, Stacey T; Sedaghat, Ahmad R

2017-12-01

Previous studies have identified subdomains of the 22-item Sino-Nasal Outcome Test (SNOT-22), reflecting distinct and largely independent categories of chronic rhinosinusitis (CRS) symptoms. However, no study has validated the subdomain structure of the SNOT-22. This study aims to validate the existence of underlying symptom subdomains of the SNOT-22 using confirmatory factor analysis (CFA) and to develop a subdomain model that practitioners and researchers can use to describe CRS symptomatology. A total of 800 patients with CRS were included into this cross-sectional study (400 CRS patients from Boston, MA, and 400 CRS patients from Reno, NV). Their SNOT-22 responses were analyzed using exploratory factor analysis (EFA) to determine the number of symptom subdomains. A CFA was performed to develop a validated measurement model for the underlying SNOT-22 subdomains along with various tests of validity and goodness of fit. EFA demonstrated 4 distinct factors reflecting: sleep, nasal, otologic/facial pain, and emotional symptoms (Cronbach's alpha, >0.7; Bartlett's test of sphericity, p < 0.001; Kaiser-Meyer-Olkin >0.90), independent of geographic locale. The corresponding CFA measurement model demonstrated excellent measures of fit (root mean square error of approximation, <0.06; standardized root mean square residual, <0.08; comparative fit index, >0.95; Tucker-Lewis index, >0.95) and measures of construct validity (heterotrait-monotrait [HTMT] ratio, <0.85; composite reliability, >0.7), again independent of geographic locale. The use of the 4-subdomain structure for SNOT-22 (reflecting sleep, nasal, otologic/facial pain, and emotional symptoms of CRS) was validated as the most appropriate to calculate SNOT-22 subdomain scores for patients from different geographic regions using CFA. © 2017 ARS-AAOA, LLC.

Radioactivity measurement of nuts and seeds available in Erbil city markets

NASA Astrophysics Data System (ADS)

Ezzulddin, Saman Khabbat; Ahmed, Ali Hassan; Samad, Ahmed Ismael; Othman, Sardar Qader

2017-09-01

A study of natural and artificial radionuclides in nut and seed samples consumed in Erbil city has been performed. The NaI(TI) scintillation detector and nuclear track detector were used to measure the activity concentration of 40K, 232Th, 226Ra, 137Cs and 222Rn; respectively. The measured activity in samples ranges from (207.63 to 533.88) Bq.kg-1 with the mean value of 290.6 Bq.kg-1 for 40K, (0.031 to 0.52) Bq.kg-1 with a mean value of (0.149) Bq.kg-1for 226Ra (0.101 to 0.554) Bq.kg-1 with the mean value of (0.218) Bq.kg-1 for 232Th, 0.033 to 0.0.266 Bq.kg-1 with the mean value of (0.111) Bq.kg-1 for 137Cs and radon concentration ranged from 128.77to 298.1 Bq.m-3 with an average value of 202.7 Bq.m-3. To assess the radiological hazard due to natural radioactivity, the average values of the radium equivalent activity (Raeq), external hazard index (Hex), internal hazard index (Hin) and Gamma index (Iγ) have been calculated to be (22.67) Bq/kg, (0.061), (1.12) and (0.195) respectively.

CityWaterBalance: Track Flows of Water Through an Urban System

EPA Science Inventory

CityWaterBalance provides a reproducible workflow for studying an urban water system. The network of urban water flows and storages can be modeled and visualized. Any city may be modeled with preassembled data, but data for US cities can be gathered via web services using this p...

22. Photocopy of original photo from Corps of Engineers, Los ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. Photocopy of original photo from Corps of Engineers, Los Angeles District, 'Report on Salinas Dam, Salinas River, California,' June 15, 1943. (Photographer unknown; report located at City of San Luis Obispo.) CONSTRUCTION PHOTO SHOWING THE STRUTS, POURED TO ALIGN WITH THE RIGHT (WEST) BUTTRESS. - Salinas Dam, Salinas River near Pozo Road, Santa Margarita, San Luis Obispo County, CA

Exploring Motivations of Taekwondo Athletes/Students in New York City

ERIC Educational Resources Information Center

Zeng, Howard Z.; Cynarski, Wojciech J.; Baatz, Shannon; Park, Shawn J.

2015-01-01

This study explored what reasons/factors can truly motivate athletes/students to continually participate in taekwondo practices and competitions in New York City (NYC). Participants were 85 taekwondo athletes/students (51 Boys, 34 Girls; age range 10-22 years) from seven taekwondo schools/clubs in NYC. Data collection was done by the Adapted…

Acidosis Differentially Modulates Inactivation in NaV1.2, NaV1.4, and NaV1.5 Channels

PubMed Central

Vilin, Yury Y.; Peters, Colin H.; Ruben, Peter C.

2012-01-01

NaV channels play a crucial role in neuronal and muscle excitability. Using whole-cell recordings we studied effects of low extracellular pH on the biophysical properties of NaV1.2, NaV1.4, and NaV1.5, expressed in cultured mammalian cells. Low pH produced different effects on different channel subtypes. Whereas NaV1.4 exhibited very low sensitivity to acidosis, primarily limited to partial block of macroscopic currents, the effects of low pH on gating in NaV1.2 and NaV1.5 were profound. In NaV1.2 low pH reduced apparent valence of steady-state fast inactivation, shifted the τ(V) to depolarizing potentials and decreased channels availability during onset to slow and use-dependent inactivation (UDI). In contrast, low pH delayed open-state inactivation in NaV1.5, right-shifted the voltage-dependence of window current, and increased channel availability during onset to slow and UDI. These results suggest that protons affect channel availability in an isoform-specific manner. A computer model incorporating these results demonstrates their effects on membrane excitability. PMID:22701426

Bicarbonate Values for Healthy Residents Living in Cities Above 1500 Meters of Altitude: A Theoretical Model and Systematic Review.

PubMed

Ramirez-Sandoval, Juan C; Castilla-Peón, Maria F; Gotés-Palazuelos, José; Vázquez-García, Juan C; Wagner, Michael P; Merelo-Arias, Carlos A; Vega-Vega, Olynka; Rincón-Pedrero, Rodolfo; Correa-Rotter, Ricardo

2016-06-01

Ramirez-Sandoval, Juan C., Maria F. Castilla-Peón, José Gotés-Palazuelos, Juan C. Vázquez-García, Michael P. Wagner, Carlos A. Merelo-Arias, Olynka Vega-Vega, Rodolfo Rincón-Pedrero, and Ricardo Correa-Rotter. Bicarbonate values for healthy residents living in cities above 1500 m of altitude: a theoretical model and systematic review. High Alt Med Biol. 17:85-92, 2016.-Plasma bicarbonate (HCO3(-)) concentration is the main value used to assess the metabolic component of the acid-base status. There is limited information regarding plasma HCO3(-) values adjusted for altitude for people living in cities at high altitude defined as 1500 m (4921 ft) or more above sea level. Our aim was to estimate the plasma HCO3(-) concentration in residents of cities at these altitudes using a theoretical model and compare these values with HCO3(-) values found on a systematic review, and with those venous CO2 values obtained in a sample of 633 healthy individuals living at an altitude of 2240 m (7350 ft). We calculated the PCO2 using linear regression models and calculated plasma HCO3(-) according to the Henderson-Hasselbalch equation. Results show that HCO3(-) concentration falls as the altitude of the cities increase. For each 1000 m of altitude above sea level, HCO3(-) decreases to 0.55 and 1.5 mEq/L in subjects living at sea level with acute exposure to altitude and in subjects acclimatized to altitude, respectively. Estimated HCO3(-) values from the theoretical model were not different to HCO3(-) values found in publications of a systematic review or with venous total CO2 measurements in our sample. Altitude has to be taken into consideration in the calculation of HCO3(-) concentrations in cities above 1500 m to avoid an overdiagnosis of acid-base disorders in a given individual.

Development of Urban Inundation Warning Model at Cyclic Artificial Water Way in Song-do International City, Republic of Korea

NASA Astrophysics Data System (ADS)

Lee, T.; Lee, C.; Kim, H.

2016-12-01

Abstract Song-do international city was constructed by reclaiming land from the coastal waters of Yeonsu-gu, Incheon Metropolitan City, Republic of Korea. The □-shaped cyclic artificial water way has been considered for improving water quality, waterfront and internal drainage in Song-do international city. By improving water quality, various marine facilities, such as marina, artificial beach, marine terminal, and so on, will be set up around the artificial water way for the waterfront. Since the water stage of the artificial water way changes depending on water gates operations, it is necessary to develop an urban inundation warning model to evaluate safeties of the waterfront facilities and its passengers. By considering characteristics of urban watershed, we calculate discharge flowing into the water way using XP-SWMM model. As a result of estimating 100-year flood frequency, although there are slight differences in drainage sections, the maximum flood discharge occurs in 90-min rainfall duration. In order to consider impacts of tide and hydraulic structure, we establish Inland drainage plans through the analysis of unsteady flow using HEC-RAS. The urban inundation warning model is configured to issue a warning when the water plain elevation exceeds EL. 1.5m which is usually managed at EL. 1.0m. In this study, the design flood stage of artificial water way and urban inundation warning model are developed for Song-do international city, and therefore it is expected that a reliability of management and operation of the waterfront facilities is improved. Keywords : Artificial Water Way; Waterfront; Urban Inundation Warning Model. Acknowlegement This research was supported by a grant [MPSS-NH-2015-79] through the Disaster and Safety Management Institute funded by Ministry of Public Safety and Security of Korean government.

Numerical modelling of channel processes and analysis of possible channel improvement measures on the Lena River near city Yakutsk

NASA Astrophysics Data System (ADS)

Krylenko, Inna; Belikov, Vitaly; Zavadskii, Aleksander; Borisova, Natalya; Golovlyov, Pavel; Rumyantsev, Alexey

2017-04-01

City Yakutsk (administrative, culture and industrial center of the North East of Russia) situated on the left bank of large Russian river Lena last decades has faced with many problems, concerning intensive channel processes. Most dramatic among them are sediment accumulation near main water intake structure, supplying city Yakutsk by the drinking water, and deterioration in conditions of the navigation roots to the main city ports. Hydrodynamic modelling has been chosen as the main tool for analyses of the modern tendencies in channel processes and for the evaluation of possible channel improvement measures efficiency. STREAM_2D program complex (authors V. Belikov et al.), which is based on the numerical solution of two-dimensional Saint-Venant equations on a hybrid curvilinear quadrangular and rectangular mesh and take into account sediment transport, was used for the simulations. Detailed field data about water regime of the Lena river, bathymetry of the channels and topography of the floodplains was collected for model developing. Model area has covered 75 km of the Lena river valley including branched channels and wide floodplain from Tabaga to Kangalassy gauge cites. Data of these stations were used for model boundary conditions assigning. Data of gauge station city Yakutsk as well as measured during field campaign water levels and flow velocities was taken into account for model calibration and validation. Results of modelling has demonstrated close correspondence with observed water levels and discharges distribution between channel branches for different hydrological situations. Different combinations of hydrographs of 1, 10, 50% exceedance probability was used as input for modelling of channel deformations. Simulation results has shown that in future 10 years aligning of water discharges distribution between main Lena river branches near Yakutsk is possible, that is a positive tendency from the point of view of water supply of the city. More than 15

Constrained Surface Complexation Modeling: Rutile in RbCl, NaCl, and NaCF 3SO 3 Media to 250 °C

DOE Office of Scientific and Technical Information (OSTI.GOV)

Machesky, Michael L.; Předota, Milan; Ridley, Moira K.

In this paper, a comprehensive set of molecular-level results, primarily from classical molecular dynamics (CMD) simulations, are used to constrain CD-MUSIC surface complexation model (SCM) parameters describing rutile powder titrations conducted in RbCl, NaCl, and NaTr (Tr = triflate, CF 3SO 3 –) electrolyte media from 25 to 250 °C. Rb + primarily occupies the innermost tetradentate binding site on the rutile (110) surface at all temperatures (25, 150, 250 °C) and negative charge conditions (-0.1 and -0.2 C/m 2) probed via CMD simulations, reflecting the small hydration energy of this large, monovalent cation. Consequently, variable SCM parameters (Stern-layer capacitancemore » values and intrinsic Rb + binding constants) were adjusted relatively easily to satisfactorily match the CMD and titration data. The larger hydration energy of Na + results in a more complex inner-sphere distribution, which shifts from bidentate to tetradentate binding with increasing negative charge and temperature, and this distribution was not matched well for both negative charge conditions, which may reflect limitations in the CMD and/or SCM approaches. Finally, in particular, the CMD axial density profiles for Rb + and Na + reveal that peak binding distances shift toward the surface with increasing negative charge, suggesting that the CD-MUSIC framework may be improved by incorporating CD or Stern-layer capacitance values that vary with charge.« less

Constrained Surface Complexation Modeling: Rutile in RbCl, NaCl, and NaCF 3SO 3 Media to 250 °C

DOE PAGES

Machesky, Michael L.; Předota, Milan; Ridley, Moira K.; ...

2015-06-01

In this paper, a comprehensive set of molecular-level results, primarily from classical molecular dynamics (CMD) simulations, are used to constrain CD-MUSIC surface complexation model (SCM) parameters describing rutile powder titrations conducted in RbCl, NaCl, and NaTr (Tr = triflate, CF 3SO 3 –) electrolyte media from 25 to 250 °C. Rb + primarily occupies the innermost tetradentate binding site on the rutile (110) surface at all temperatures (25, 150, 250 °C) and negative charge conditions (-0.1 and -0.2 C/m 2) probed via CMD simulations, reflecting the small hydration energy of this large, monovalent cation. Consequently, variable SCM parameters (Stern-layer capacitancemore » values and intrinsic Rb + binding constants) were adjusted relatively easily to satisfactorily match the CMD and titration data. The larger hydration energy of Na + results in a more complex inner-sphere distribution, which shifts from bidentate to tetradentate binding with increasing negative charge and temperature, and this distribution was not matched well for both negative charge conditions, which may reflect limitations in the CMD and/or SCM approaches. Finally, in particular, the CMD axial density profiles for Rb + and Na + reveal that peak binding distances shift toward the surface with increasing negative charge, suggesting that the CD-MUSIC framework may be improved by incorporating CD or Stern-layer capacitance values that vary with charge.« less

Predictions of ground states of LiGa and NaGa

NASA Astrophysics Data System (ADS)

Boldyrev, Alexander I.; Simons, Jack

1996-11-01

The ground and very low-lying excited states of LiGa and NaGa have been studied using high level ab initio techniques. At the QCISD(T)/6-311 + G(2df) level of theory, the 1Σ + state was found to be the most stable for both molecules. The equilibrium bond lengths and dissociation energies were found to be: R( LiGa) = 2.865 Å and D0(LiGa) = 22.3 kcal/mol and R( NaGa) = 3.174 Å and D0(NaGa) = 17.1 kcal/mol. Trends within the ground electronic states of LiB, NaB, LiAl, NaAl, LiGa and NaGa are discussed and predictions for related AlkM (Alk LiCs and MBTl) species are made.

Modeling Impact of Urbanization in US Cities Using Simple Biosphere Model SiB2

NASA Technical Reports Server (NTRS)

Zhang, Ping; Bounoua, Lahouari; Thome, Kurtis; Wolfe, Robert

2016-01-01

We combine Landsat- and the Moderate Resolution Imaging Spectroradiometer (MODIS)-based products, as well as climate drivers from Phase 2 of the North American Land Data Assimilation System (NLDAS-2) in a Simple Biosphere land surface model (SiB2) to assess the impact of urbanization in continental USA (excluding Alaska and Hawaii). More than 300 cities and their surrounding suburban and rural areas are defined in this study to characterize the impact of urbanization on surface climate including surface energy, carbon budget, and water balance. These analyses reveal an uneven impact of urbanization across the continent that should inform upon policy options for improving urban growth including heat mitigation and energy use, carbon sequestration and flood prevention.

The Operation Method of Smarter City Based on Ecological Theory

NASA Astrophysics Data System (ADS)

Fan, C.; Fan, H. Y.

2017-10-01

As the city and urbanization’s accelerated pace has caused galloping population, the urban framework is extending with increasingly complex social problems. The urban management tends to become complicated and the governance seems more difficult to pursue. exploring the urban management’s new model has attracted local governments’ urgent attention. tcombines the guiding ideology and that management’s practices based on ecological theory, explains the Smarter city Ecology Managementmodel’s formation, makes modern urban management’s comparative analysis and further defines the aforesaid management mode’s conceptual model. Based on the smarter city system theory’s ecological carrying capacity, the author uses mathematical model to prove the coordination relationship between the smarter city Ecology Managementmode’s subsystems, demonstrates that it can improve the urban management’s overall level, emphasizes smarter city management integrity, believing that urban system’s optimization is based on each subsystem being optimized, attaching the importance to elements, structure, and balance between each subsystem and between internal elements. Through the establishment of the smarter city Ecology Managementmodel’s conceptual model and theoretical argumentation, it provides a theoretical basis and technical guidance to that model’s innovation.

Electrophysiological evidence for Na+-coupled bicarbonate transport in cultured rat hepatocytes.

PubMed

Fitz, J G; Persico, M; Scharschmidt, B F

1989-03-01

Recent observations suggest that hepatocytes exhibit basolateral electrogenic Na+-coupled HCO3- transport. In these studies, we have further investigated this transport mechanism in primary culture of rat hepatocytes using intracellular microelectrodes to measure membrane potential difference (PD) and the pH-sensitive fluorochrome 2',7'-bis(carboxyethyl)-5(6)-carboxyfluorescein to measure intracellular pH (pHi). In balanced media containing 25 mM HCO3-, PD averaged -32.1 +/- 0.6 (SE) mV and pHi averaged 7.22 +/- 0.03. PD became more negative (hyperpolarized) when extracellular [HCO3-] was increased and less negative (depolarized) when extracellular HCO3- was decreased. Acute replacement of extracellular Na+ by choline also resulted in membrane depolarization of 18.0 +/- 1.6 mV, suggesting net transfer of negative charge. This decrease in PD upon Na+ removal was HCO3- -dependent, amiloride insensitive, and inhibited by the disulfonic stilbene 4-acetamido-4'-isothiocyanostilbene-2,2'-disulfonic acid (SITS). PD also decreased upon acute exposure to SITS. The degree of depolarization seen with removal of Na+ or HCO3- correlated directly with resting PD (r = 0.81 and 0.95, respectively), suggesting a voltage-dependent mechanism. Removal of extracellular Na+ also decreased pHi to 7.06 +/- 0.02, and this acidification was decreased in the absence of HCO3- or in the presence of SITS or amiloride. These studies provide direct evidence for electrogenic Na+-coupled HCO3- transport in rat hepatocytes. Further, they suggest that it represents a major pathway for conductive movement of Na+ across the membrane and that it contributes, along with Na+-H+ exchange, to the intracellular acidification observed upon removal of extracellular Na+.(ABSTRACT TRUNCATED AT 250 WORDS)

The Lanchester square-law model extended to a (2,2) conflict

NASA Astrophysics Data System (ADS)

Colegrave, R. K.; Hyde, J. M.

1993-01-01

A natural extension of the Lanchester (1,1) square-law model is the (M,N) linear model in which M forces oppose N forces with constant attrition rates. The (2,2) model is treated from both direct and inverse viewpoints. The inverse problem means that the model is to be fitted to a minimum number of observed force levels, i.e. the attrition rates are to be found from the initial force levels together with the levels observed at two subsequent times. An approach based on Hamiltonian dynamics has enabled the authors to derive a procedure for solving the inverse problem, which is readily computerized. Conflicts in which participants unexpectedly rally or weaken must be excluded.

3D Visualization of Urban Area Using Lidar Technology and CityGML

NASA Astrophysics Data System (ADS)

Popovic, Dragana; Govedarica, Miro; Jovanovic, Dusan; Radulovic, Aleksandra; Simeunovic, Vlado

2017-12-01

3D models of urban areas have found use in modern world such as navigation, cartography, urban planning visualization, construction, tourism and even in new applications of mobile navigations. With the advancement of technology there are much better solutions for mapping earth’s surface and spatial objects. 3D city model enables exploration, analysis, management tasks and presentation of a city. Urban areas consist of terrain surfaces, buildings, vegetation and other parts of city infrastructure such as city furniture. Nowadays there are a lot of different methods for collecting, processing and publishing 3D models of area of interest. LIDAR technology is one of the most effective methods for collecting data due the large amount data that can be obtained with high density and geometrical accuracy. CityGML is open standard data model for storing alphanumeric and geometry attributes of city. There are 5 levels of display (LoD0, LoD1, LoD2, LoD3, LoD4). In this study, main aim is to represent part of urban area of Novi Sad using LIDAR technology, for data collecting, and different methods for extraction of information’s using CityGML as a standard for 3D representation. By using series of programs, it is possible to process collected data, transform it to CityGML and store it in spatial database. Final product is CityGML 3D model which can display textures and colours in order to give a better insight of the cities. This paper shows results of the first three levels of display. They consist of digital terrain model and buildings with differentiated rooftops and differentiated boundary surfaces. Complete model gives us a realistic view of 3D objects.

Modelling regional climate change and urban planning scenarios and their impacts on the urban environment in two cities with WRF-ACASA

NASA Astrophysics Data System (ADS)

Falk, M.; Pyles, R. D.; Marras, S.; Spano, D.; Paw U, K. T.

2011-12-01

The number of urban metabolism studies has increased in recent years, due to the important impact that energy, water and carbon exchange over urban areas have on climate change. Urban modeling is therefore crucial in the future design and management of cities. This study presents the ACASA model coupled to the Weather Research and Forecasting (WRF-ARW) mesoscale model to simulate urban fluxes at a horizontal resolution of 200 meters for urban areas of roughly 100 km^2. As part of the European Project "BRIDGE", these regional simulations were used in combination with remotely sensed data to provide constraints on the land surface types and the exchange of carbon and energy fluxes from urban centers. Surface-atmosphere exchanges of mass and energy were simulated using the Advanced Canopy Atmosphere Soil Algorithm (ACASA). ACASA is a multi-layer high-order closure model, recently modified to work over natural, agricultural as well as urban environments. In particular, improvements were made to account for the anthropogenic contribution to heat and carbon production. For two cities four climate change and four urban planning scenarios were simulated: The climate change scenarios include a base scenario (Sc0: 2008 Commit in IPCC), a medium emission scenario (Sc1: IPCC A2), a worst case emission scenario (Sce2: IPCC A1F1) and finally a best case emission scenario (Sce3: IPCC B1). The urban planning scenarios include different development scenarios such as smart growth. The two cities are a high latitude city, Helsinki (Finland) and an historic city, Florence (Italy). Helsinki is characterized by recent, rapid urbanization that requires a substantial amount of energy for heating, while Florence is representative of cities in lower latitudes, with substantial cultural heritage and a comparatively constant architectural footprint over time. In general, simulated fluxes matched the point observations well and showed consistent improvement in the energy partitioning over

Collaborative Multi-Scale 3d City and Infrastructure Modeling and Simulation

NASA Astrophysics Data System (ADS)

Breunig, M.; Borrmann, A.; Rank, E.; Hinz, S.; Kolbe, T.; Schilcher, M.; Mundani, R.-P.; Jubierre, J. R.; Flurl, M.; Thomsen, A.; Donaubauer, A.; Ji, Y.; Urban, S.; Laun, S.; Vilgertshofer, S.; Willenborg, B.; Menninghaus, M.; Steuer, H.; Wursthorn, S.; Leitloff, J.; Al-Doori, M.; Mazroobsemnani, N.

2017-09-01

Computer-aided collaborative and multi-scale 3D planning are challenges for complex railway and subway track infrastructure projects in the built environment. Many legal, economic, environmental, and structural requirements have to be taken into account. The stringent use of 3D models in the different phases of the planning process facilitates communication and collaboration between the stake holders such as civil engineers, geological engineers, and decision makers. This paper presents concepts, developments, and experiences gained by an interdisciplinary research group coming from civil engineering informatics and geo-informatics banding together skills of both, the Building Information Modeling and the 3D GIS world. New approaches including the development of a collaborative platform and 3D multi-scale modelling are proposed for collaborative planning and simulation to improve the digital 3D planning of subway tracks and other infrastructures. Experiences during this research and lessons learned are presented as well as an outlook on future research focusing on Building Information Modeling and 3D GIS applications for cities of the future.

Impact of meteorological changes on the incidence of scarlet fever in Hefei City, China.

PubMed

Duan, Yu; Huang, Xiao-Lei; Wang, Yu-Jie; Zhang, Jun-Qing; Zhang, Qi; Dang, Yue-Wen; Wang, Jing

2016-10-01

Studies on scarlet fever with meteorological factors included were few. We aimed to illustrate meteorological factors' effects on monthly incidence of scarlet fever. Cases of scarlet fever were collected from the report of legal infectious disease in Hefei City from 1985 to 2006; the meteorological data were obtained from the weather bureau of Hefei City. Monthly incidence and corresponding meteorological data in these 22 years were used to develop the model. The model of auto regressive integrated moving average with covariates was used in statistical analyses. There was a highest peak from March to June and a small peak from November to January. The incidence of scarlet fever ranges from 0 to 0.71502 (per 10 5 population). SARIMAX (1,0,0)(1,0,0) 12 model was fitted with monthly incidence and meteorological data optimally. It was shown that relative humidity (β = -0.002, p = 0.020), mean temperature (β = 0.006, p = 0.004), and 1 month lag minimum temperature (β = -0.007, p < 0.001) had effect on the incidence of scarlet fever in Hefei. Besides, the incidence in a previous month (AR(β) = 0.469, p < 0.001) and in 12 months before (SAR(β) = 0.255, p < 0.001) was positively associated with the incidence. This study shows that scarlet fever incidence was negatively associated with monthly minimum temperature and relative humidity while was positively associated with mean temperature in Hefei City, China. Besides, the ARIMA model could be useful not only for prediction but also for the analysis of multiple correlations.

The Impact of 3D Data Quality on Improving GNSS Performance Using City Models Initial Simulations

NASA Astrophysics Data System (ADS)

Ellul, C.; Adjrad, M.; Groves, P.

2016-10-01

There is an increasing demand for highly accurate positioning information in urban areas, to support applications such as people and vehicle tracking, real-time air quality detection and navigation. However systems such as GPS typically perform poorly in dense urban areas. A number of authors have made use of 3D city models to enhance accuracy, obtaining good results, but to date the influence of the quality of the 3D city model on these results has not been tested. This paper addresses the following question: how does the quality, and in particular the variation in height, level of generalization and completeness and currency of a 3D dataset, impact the results obtained for the preliminary calculations in a process known as Shadow Matching, which takes into account not only where satellite signals are visible on the street but also where they are predicted to be absent. We describe initial simulations to address this issue, examining the variation in elevation angle - i.e. the angle above which the satellite is visible, for three 3D city models in a test area in London, and note that even within one dataset using different available height values could cause a difference in elevation angle of up to 29°. Missing or extra buildings result in an elevation variation of around 85°. Variations such as these can significantly influence the predicted satellite visibility which will then not correspond to that experienced on the ground, reducing the accuracy of the resulting Shadow Matching process.

Genesis of the City Flood Queretaro

NASA Astrophysics Data System (ADS)

Sosa, E. G.; Salinas, N. R.

2013-12-01

In 1446 the emperor Moctezuma Ihuicamina talked about of the Queretaro region, which was northern border of their empire (From Torquemeda, 1975). Septien (1999, page 17, Volume 1). "The news that came the Otomi region, spoken the good soil fertility of the Querétaro valley, being an attractive to this place". The aims research is show how the from foundation of the prehispanic period the city of Santiago Queretaro was marked by the development and growth, and as fascinating Mexico historical events recorded their urban-hydraulic direction shows a clear symbiosis between the model prehispanic and colonial urban was conceived it as a compact core, it is currently set to modern urbanization, fragmenting the natural system of the hydrologic surface runoff , adapting and adopting solutions that break the natural equilibrium of the valley Queretaro. In the period 1970-2003 in Mexico 1744 floods was reported but in Queretaro occurred only 10 floods because in 22nd place ranking by frequency of floods, Matias Ramirez et al (2006). Since the foundation of Santiago de Querétaro (1455) the changes of uses soils and the construction of channels had caused the strangulation of city, without regarding the natural of the ways of water of the river Querétaro, so occupied by collectors or drains that also constriction the system of urban water of city of Queretaro that breakdowns with the architecture and natural ways of water. Similarly, historical tracking flooding is not only an exploration of public actions on the implementation of protection works, but also updates the concept of cultural heritage, as fixed and cultivates social memory of the preservation of knowledge the territory. Every time a flood comes increasing concern of whether it corresponds to situations already lived. The flood occurred last February 2010 that affected five delegations besides Querétaro Historic Center (Alameda), the Arquitos, Quintas del Marques, among other colonies, is testimony to the

Adaptive Learning in Smart Cities--The Cases of Catania and Helsinki

ERIC Educational Resources Information Center

Laitinen, Ilpo; Piazza, Roberta; Stenvall, Jari

2017-01-01

Our research is a comparative qualitative study. The material has been gathered from the cities of Helsinki and Catania. The target cities showcase varied successes and models of smart cities. In the cities, key people involved in the smart city concept--with different kinds of professional backgrounds--were interviewed, both individually and in…

Simulation of Urban Rainfall-Runoff in Piedmont Cities: A Case Study in Jinan City, China

NASA Astrophysics Data System (ADS)

Chang, X.; Xu, Z.; Zhao, G.; Li, H.

2017-12-01

During the past decades, frequent flooding disasters in urban areas resulted in catastrophic impacts such as human life casualties and property damages especially in piedmont cities due to its specific topography. In this study, a piedmont urban flooding model was developed in the Huangtaiqiao catchment based on SWMM. The sub-catchments in this piedmont area were divided into mountainous area, plain area and main urban area according to the variations of underlying surface topography. The impact of different routing mode and channel roughness on simulation results was quantitatively analyzed under different types of scenarios, and genetic algorithm was used to optimize model parameters. Results show that the simulation is poor (with a mean Nash coefficient of 0.61) when using the traditional routing mode in SWMM model, which usually ignores terrain variance in piedmont area. However, when the difference of routing mode, percent routed and channel roughness are considered, the prediction precision of model were significantly increased (with a mean Nash coefficient of 0.86), indicating that the difference of surface topography significantly affects the simulation results in piedmont cities. The relevant results would provide the scientific basis and technical support for rainfall-runoff simulation, flood control and disaster alleviation in piedmont cities.

Superlinear scaling for innovation in cities.

PubMed

Arbesman, Samuel; Kleinberg, Jon M; Strogatz, Steven H

2009-01-01

Superlinear scaling in cities, which appears in sociological quantities such as economic productivity and creative output relative to urban population size, has been observed, but not been given a satisfactory theoretical explanation. Here we provide a network model for the superlinear relationship between population size and innovation found in cities, with a reasonable range for the exponent.

Superlinear scaling for innovation in cities

NASA Astrophysics Data System (ADS)

Arbesman, Samuel; Kleinberg, Jon M.; Strogatz, Steven H.

2009-01-01

Superlinear scaling in cities, which appears in sociological quantities such as economic productivity and creative output relative to urban population size, has been observed, but not been given a satisfactory theoretical explanation. Here we provide a network model for the superlinear relationship between population size and innovation found in cities, with a reasonable range for the exponent.

Searching for the best modeling specification for assessing the effects of temperature and humidity on health: a time series analysis in three European cities.

PubMed

Rodopoulou, Sophia; Samoli, Evangelia; Analitis, Antonis; Atkinson, Richard W; de'Donato, Francesca K; Katsouyanni, Klea

2015-11-01

Epidemiological time series studies suggest daily temperature and humidity are associated with adverse health effects including increased mortality and hospital admissions. However, there is no consensus over which metric or lag best describes the relationships. We investigated which temperature and humidity model specification most adequately predicted mortality in three large European cities. Daily counts of all-cause mortality, minimum, maximum and mean temperature and relative humidity and apparent temperature (a composite measure of ambient and dew point temperature) were assembled for Athens, London, and Rome for 6 years between 1999 and 2005. City-specific Poisson regression models were fitted separately for warm (April-September) and cold (October-March) periods adjusting for seasonality, air pollution, and public holidays. We investigated goodness of model fit for each metric for delayed effects up to 13 days using three model fit criteria: sum of the partial autocorrelation function, AIC, and GCV. No uniformly best index for all cities and seasonal periods was observed. The effects of temperature were uniformly shown to be more prolonged during cold periods and the majority of models suggested separate temperature and humidity variables performed better than apparent temperature in predicting mortality. Our study suggests that the nature of the effects of temperature and humidity on mortality vary between cities for unknown reasons which require further investigation but may relate to city-specific population, socioeconomic, and environmental characteristics. This may have consequences on epidemiological studies and local temperature-related warning systems.

Searching for the best modeling specification for assessing the effects of temperature and humidity on health: a time series analysis in three European cities

NASA Astrophysics Data System (ADS)

Rodopoulou, Sophia; Samoli, Evangelia; Analitis, Antonis; Atkinson, Richard W.; de'Donato, Francesca K.; Katsouyanni, Klea

2015-11-01

Epidemiological time series studies suggest daily temperature and humidity are associated with adverse health effects including increased mortality and hospital admissions. However, there is no consensus over which metric or lag best describes the relationships. We investigated which temperature and humidity model specification most adequately predicted mortality in three large European cities. Daily counts of all-cause mortality, minimum, maximum and mean temperature and relative humidity and apparent temperature (a composite measure of ambient and dew point temperature) were assembled for Athens, London, and Rome for 6 years between 1999 and 2005. City-specific Poisson regression models were fitted separately for warm (April-September) and cold (October-March) periods adjusting for seasonality, air pollution, and public holidays. We investigated goodness of model fit for each metric for delayed effects up to 13 days using three model fit criteria: sum of the partial autocorrelation function, AIC, and GCV. No uniformly best index for all cities and seasonal periods was observed. The effects of temperature were uniformly shown to be more prolonged during cold periods and the majority of models suggested separate temperature and humidity variables performed better than apparent temperature in predicting mortality. Our study suggests that the nature of the effects of temperature and humidity on mortality vary between cities for unknown reasons which require further investigation but may relate to city-specific population, socioeconomic, and environmental characteristics. This may have consequences on epidemiological studies and local temperature-related warning systems.

The mini climatic city a dedicated space for technological innovations devoted to Sustainable City

NASA Astrophysics Data System (ADS)

Derkx, François; Lebental, Bérengère; Merliot, Erick; Dumoulin, Jean; Bourquin, Frédéric

2015-04-01

Our cities, from megalopolis to rural commune, are systems of an extraordinary technological and human complexity. Their balance is threatened by the growing population and rarefaction of resources. Massive urbanization endanges the environment, while global climate change, through natural hazards generated (climatic, hydrological and geological), threats people and goods. Connect the city, that is to say, design and spread systems able to route, between multiple actors, a very large amount of heterogeneous information natures and analyzed for various purposes, is at the heart of the hopes to make our cities more sustainable: climate-resilient, energy efficient and actresses of the energy transition, attractive to individuals and companies, health and environment friendly. If multiple players are already aware of this need, progress is slow because, beyond the only connectivity, it is the urban intelligence that will create the sustainable city, through coordinated capabilities of Perception, Decision and Action: to measure phenomena; to analyze their impact on urban sustainability in order to define strategies for improvement; to effectively act on the cause of the phenomenon. In this very active context with a strong societal impact, the Sense-City project aims to accelerate research and innovation in the field of sustainable city, particularly in the field of micro and nanosensors. The project is centered around a "mini climatic City", a unique mobile environmental chamber in Europe of 400m² that can accommodate realistic models of city main components, namely buildings, infrastructures, distribution networks or basements. This R&D test place, available in draft form from January 2015 and in finalized version in 2016, will allow to validate, in realistic conditions, innovative technologies performances for the sustainable city, especially micro- and nano-sensors, at the end of their development laboratory and upstream of industrialization. R & D platform

Fine Particulate Air Pollution and Daily Mortality. A Nationwide Analysis in 272 Chinese Cities.

PubMed

Chen, Renjie; Yin, Peng; Meng, Xia; Liu, Cong; Wang, Lijun; Xu, Xiaohui; Ross, Jennifer A; Tse, Lap A; Zhao, Zhuohui; Kan, Haidong; Zhou, Maigeng

2017-07-01

Evidence concerning the acute health effects of air pollution caused by fine particulate matter (PM 2.5 ) in developing countries is quite limited. To evaluate short-term associations between PM 2.5 and daily cause-specific mortality in China. A nationwide time-series analysis was performed in 272 representative Chinese cities from 2013 to 2015. Two-stage Bayesian hierarchical models were applied to estimate regional- and national-average associations between PM 2.5 concentrations and daily cause-specific mortality. City-specific effects of PM 2.5 were estimated using the overdispersed generalized additive models after adjusting for time trends, day of the week, and weather conditions. Exposure-response relationship curves and potential effect modifiers were also evaluated. The average of annual mean PM 2.5 concentration in each city was 56 μg/m 3 (minimum, 18 μg/m 3 ; maximum, 127 μg/m 3 ). Each 10-μg/m 3 increase in 2-day moving average of PM 2.5 concentrations was significantly associated with increments in mortality of 0.22% from total nonaccidental causes, 0.27% from cardiovascular diseases, 0.39% from hypertension, 0.30% from coronary heart diseases, 0.23% from stroke, 0.29% from respiratory diseases, and 0.38% from chronic obstructive pulmonary disease. There was a leveling off in the exposure-response curves at high concentrations in most, but not all, regions. The associations were stronger in cities with lower PM 2.5 levels or higher temperatures, and in subpopulations with elder age or less education. This nationwide investigation provided robust evidence of the associations between short-term exposure to PM 2.5 and increased mortality from various cardiopulmonary diseases in China. The magnitude of associations was lower than those reported in Europe and North America.

National networks of Healthy Cities in Europe.

PubMed

Janss Lafond, Leah; Heritage, Zoë

2009-11-01

National networks of Healthy Cities emerged in the late 1980s as a spontaneous reaction to a great demand by cities to participate in the Healthy Cities movement. Today, they engage at least 1300 cities in the European region and form the backbone of the Healthy Cities movement. This article provides an analysis of the results of the regular surveys of national networks that have been carried out principally since 1997. The main functions and achievements of national networks are presented alongside some of their most pressing challenges. Although networks have differing priorities and organizational characteristics, they do share common goals and strategic directions based on the Healthy Cities model (see other articles in this special edition of HPI). Therefore, it has been possible to identify a set of organizational and strategic factors that contribute to the success of networks. These factors form the basis of a set of accreditation criteria for national networks and provide guidance for the establishment of new national networks. Although national networks have made substantial achievements, they continue to face a number of dilemmas that are discussed in the article. Problems a national network must deal with include how to obtain sustainable funding, how to raise the standard of work in cities without creating exclusive participation criteria and how to balance the need to provide direct support to cities with its role as a national player. These dilemmas are similar to other public sector networks. During the last 15 years, the pooling of practical expertise in urban health has made Healthy Cities networks an important resource for national as well as local governments. Not only do they provide valuable support to their members but they often advise ministries and other national institutions on effective models to promote sustainable urban health development.

Na/K pump inactivation, subsarcolemmal Na measurements, and cytoplasmic ion turnover kinetics contradict restricted Na spaces in murine cardiac myocytes

PubMed Central

Lu, Fang-Min

2017-01-01

Decades ago, it was proposed that Na transport in cardiac myocytes is modulated by large changes in cytoplasmic Na concentration within restricted subsarcolemmal spaces. Here, we probe this hypothesis for Na/K pumps by generating constitutive transsarcolemmal Na flux with the Na channel opener veratridine in whole-cell patch-clamp recordings. Using 25 mM Na in the patch pipette, pump currents decay strongly during continuous activation by extracellular K (τ, ∼2 s). In contradiction to depletion hypotheses, the decay becomes stronger when pump currents are decreased by hyperpolarization. Na channel currents are nearly unchanged by pump activity in these conditions, and conversely, continuous Na currents up to 0.5 nA in magnitude have negligible effects on pump currents. These outcomes are even more pronounced using 50 mM Li as a cytoplasmic Na congener. Thus, the Na/K pump current decay reflects mostly an inactivation mechanism that immobilizes Na/K pump charge movements, not cytoplasmic Na depletion. When channel currents are increased beyond 1 nA, models with unrestricted subsarcolemmal diffusion accurately predict current decay (τ ∼15 s) and reversal potential shifts observed for Na, Li, and K currents through Na channels opened by veratridine, as well as for Na, K, Cs, Li, and Cl currents recorded in nystatin-permeabilized myocytes. Ion concentrations in the pipette tip (i.e., access conductance) track without appreciable delay the current changes caused by sarcolemmal ion flux. Importantly, cytoplasmic mixing volumes, calculated from current decay kinetics, increase and decrease as expected with osmolarity changes (τ >30 s). Na/K pump current run-down over 20 min reflects a failure of pumps to recover from inactivation. Simulations reveal that pump inactivation coupled with Na-activated recovery enhances the rapidity and effectivity of Na homeostasis in cardiac myocytes. In conclusion, an autoregulatory mechanism enhances cardiac Na/K pump activity when

View of the Salt Lake City, Utah area

NASA Image and Video Library

1973-08-30

SL3-22-0322 (July-September 1973) --- An oblique view of the Salt Lake City, Utah area as photographed from Earth orbit by one of the six lenses of the Itek-furnished S190-A Multispectral Photographic Facility Experiment aboard the Skylab space station. Approximately two-thirds of the Great Salt Lake is in view. The smaller body of water south of Salt Lake City is Utah Lake. The Wasatch Range is on the east side of the Great Salt Lake. Federal agencies participating with NASA on the EREP project are the Departments of Agriculture, Commerce, Interior, the Environmental Protection Agency and the Corps of Engineers. All EREP photography is available to the public through the Department of Interior?s Earth Resources Observations Systems Data Center, Sioux Falls, South Dakota, 57198. Photo credit: NASA

City Beats: A Creative Community Partnership Initiative at ArtPlay

ERIC Educational Resources Information Center

Jeanneret, Neryl; Brown, Robert

2012-01-01

The City of Melbourne's ArtPlay is open to children and young people aged 3-13 years, and provides a wide range of artist-led programs that serve a broad community within and outside the municipality. Its sister facility, Signal, caters for young people 13-22 years. An Australia Council of the Arts funded Creative Community Partnership Initiative,…

Examining a Causal Model of Early Drug Involvement Among Inner City Junior High School Youths.

ERIC Educational Resources Information Center

Dembo, Richard; And Others

Reflecting the need to construct more inclusive, socially and culturally relevant conceptions of drug use than currently exist, the determinants of drug involvement among inner-city youths within the context of a causal model were investigated. The drug involvement of the Black and Puerto Rican junior high school girls and boys was hypothesized to…

Clues to NaCN formation

NASA Astrophysics Data System (ADS)

Quintana-Lacaci, G.; Cernicharo, J.; Velilla Prieto, L.; Agúndez, M.; Castro-Carrizo, A.; Fonfría, J. P.; Massalkhi, S.; Pardo, J. R.

2017-11-01

Context. ALMA is providing us essential information on where certain molecules form. Observing where these molecules emission arises from, the physical conditions of the gas, and how this relates with the presence of other species allows us to understand the formation of many species, and to significantly improve our knowledge of the chemistry that occurs in the space. Aims: We studied the molecular distribution of NaCN around IRC +10216, a molecule detected previously, but whose origin is not clear. High angular resolution maps allow us to model the abundance distribution of this molecule and check suggested formation paths. Methods: We modeled the emission of NaCN assuming local thermal equilibrium (LTE) conditions. These profiles were fitted to azimuthal averaged intensity profiles to obtain an abundance distribution of NaCN. Results: We found that the presence of NaCN seems compatible with the presence of CN, probably as a result of the photodissociation of HCN, in the inner layers of the ejecta of IRC +10216. However, similar as for CH3CN, current photochemical models fail to reproduce this CN reservoir. We also found that the abundance peak of NaCN appears at a radius of 3 × 1015 cm, approximately where the abundance of NaCl, suggested to be the parent species, starts to decay. However, the abundance ratio shows that the NaCl abundance is lower than that obtained for NaCN. We expect that the LTE assumption might result in NaCN abundances higher than the real ones. Updated photochemical models, collisional rates, and reaction rates are essential to determine the possible paths of the NaCN formation. Based on observations carried out with ALMA and the IRAM 30 m Telescope. ALMA is a partnership of ESO (representing its member states), NSF (USA) and NINS (Japan), together with NRC (Canada) and NSC and ASIAA (Taiwan), in cooperation with the Republic of Chile. The Joint ALMA Observatory is operated by ESO, AUI/NRAO and NAOJ. IRAM is supported by INSU/CNRS (France

The evolution of Zipf's law indicative of city development

NASA Astrophysics Data System (ADS)

Chen, Yanguang

2016-02-01

Zipf's law of city-size distributions can be expressed by three types of mathematical models: one-parameter form, two-parameter form, and three-parameter form. The one-parameter and one of the two-parameter models are familiar to urban scientists. However, the three-parameter model and another type of two-parameter model have not attracted attention. This paper is devoted to exploring the conditions and scopes of application of these Zipf models. By mathematical reasoning and empirical analysis, new discoveries are made as follows. First, if the size distribution of cities in a geographical region cannot be described with the one- or two-parameter model, maybe it can be characterized by the three-parameter model with a scaling factor and a scale-translational factor. Second, all these Zipf models can be unified by hierarchical scaling laws based on cascade structure. Third, the patterns of city-size distributions seem to evolve from three-parameter mode to two-parameter mode, and then to one-parameter mode. Four-year census data of Chinese cities are employed to verify the three-parameter Zipf's law and the corresponding hierarchical structure of rank-size distributions. This study is revealing for people to understand the scientific laws of social systems and the property of urban development.

Parameter Calibration of GTN Damage Model and Formability Analysis of 22MnB5 in Hot Forming Process

NASA Astrophysics Data System (ADS)

Ying, Liang; Liu, Wenquan; Wang, Dantong; Hu, Ping

2017-11-01

Hot forming of high strength steel at elevated temperatures is an attractive technology to achieve the lightweight of vehicle body. The mechanical behavior of boron steel 22MnB5 strongly depends on the variation of temperature which makes the process design more difficult. In this paper, the Gurson-Tvergaard-Needleman (GTN) model is used to study the formability of 22MnB5 sheet at different temperatures. Firstly, the rheological behavior of 22MnB5 is analyzed through a series of hot tensile tests at a temperature range of 600-800 °C. Then, a detailed process to calibrate the damage parameters is given based on the response surface methodology and genetic algorithm method. The GTN model together with the damage parameters calibrated is then implemented to simulate the deformation and damage evolution of 22MnB5 in the process of high-temperature Nakazima test. The capability of the GTN model as a suitable tool to evaluate the sheet formability is confirmed by comparing experimental and calculated results. Finally, as a practical application, the forming limit diagram of 22MnB5 at 700 °C is constructed using the Nakazima simulation and Marciniak-Kuczynski (M-K) model, respectively. And the simulation integrated GTN model shows a higher reliability by comparing the predicted results of these two approaches with the experimental ones.

Toward a healthier city: nutrition standards for New York City government.

PubMed

Lederer, Ashley; Curtis, Christine J; Silver, Lynn D; Angell, Sonia Y

2014-04-01

Poor diet is a leading cause of disability, death, and rising health care costs. Government agencies can have a large impact on population nutrition by adopting healthy food purchasing policies. In 2007, New York City (NYC) began developing a nutrition policy for all foods purchased, served, or contracted for by City agencies. A Food Procurement Workgroup was created with representatives from all City agencies that engaged in food purchasing or service, and the NYC Health Department served as technical advisor. The NYC Standards for Meals/Snacks Purchased and Served (Standards) became a citywide policy in 2008. The first of its kind, the Standards apply to more than 3,000 programs run by 12 City agencies. This paper describes the development process and initial implementation of the Standards. With more than 260 million meals and snacks per year covered, the Standards increase demand for healthier products, model healthy eating, and may also affect clients' food choices beyond the institutional environment. Our experience suggests that implementation of nutrition standards across a wide range of diverse agencies is feasible, especially when high-level support is established and technical assistance is available. Healthy procurement policies can ensure that food purchased by a jurisdiction supports its public health efforts. Published by Elsevier Inc.

Model Career Exploratory Program. Junction City Jr. High School. Final Report.

ERIC Educational Resources Information Center

Kennedy, Anthony

The report describes a career education demonstration project conducted in Junction City, Oregon, a city of 2,535 people with a high concentration of low-income families. Major limitations encountered were resistance to change and lack of funds. Procedures included four inservice sessions for instructional and guidance staff and four visitations…

Parent Management Training-Oregon Model (PMTO™) in Mexico City: Integrating Cultural Adaptation Activities in an Implementation Model

PubMed Central

Baumann, Ana A.; Domenech Rodríguez, Melanie M.; Amador, Nancy G.; Forgatch, Marion S.; Parra-Cardona, J. Rubén

2015-01-01

This article describes the process of cultural adaptation at the start of the implementation of the Parent Management Training intervention-Oregon model (PMTO) in Mexico City. The implementation process was guided by the model, and the cultural adaptation of PMTO was theoretically guided by the cultural adaptation process (CAP) model. During the process of the adaptation, we uncovered the potential for the CAP to be embedded in the implementation process, taking into account broader training and economic challenges and opportunities. We discuss how cultural adaptation and implementation processes are inextricably linked and iterative and how maintaining a collaborative relationship with the treatment developer has guided our work and has helped expand our research efforts, and how building human capital to implement PMTO in Mexico supported the implementation efforts of PMTO in other places in the United States. PMID:26052184

Parent Management Training-Oregon Model (PMTO™) in Mexico City: Integrating Cultural Adaptation Activities in an Implementation Model.

PubMed

Baumann, Ana A; Domenech Rodríguez, Melanie M; Amador, Nancy G; Forgatch, Marion S; Parra-Cardona, J Rubén

2014-03-01

This article describes the process of cultural adaptation at the start of the implementation of the Parent Management Training intervention-Oregon model (PMTO) in Mexico City. The implementation process was guided by the model, and the cultural adaptation of PMTO was theoretically guided by the cultural adaptation process (CAP) model. During the process of the adaptation, we uncovered the potential for the CAP to be embedded in the implementation process, taking into account broader training and economic challenges and opportunities. We discuss how cultural adaptation and implementation processes are inextricably linked and iterative and how maintaining a collaborative relationship with the treatment developer has guided our work and has helped expand our research efforts, and how building human capital to implement PMTO in Mexico supported the implementation efforts of PMTO in other places in the United States.

[Species composition and distribution of medical mollusca in Shanghai City].

PubMed

Guo, Yun-hai; Lv, Shan; Gu, Wen-biao; Liu, He-xiang; Wu, Ying; Zhang, Yi

2015-02-01

To investigate the species diversity and distribution of medical mollusca in Shanghai City. From August 2012 to October 2013, all kinds of habitats in 8 districts and counties in Shanghai City, namely Jiading, Qingpu, Baoshan, Minhang, Songjiang, Jinshan, Chongming, Pudong, were selected for the field survey according to the distribution characteristics of the river system, and all the specimens of medical mollusca in the investigation sites were collected and classified by morphological identification. Meanwhile, the species composition, habitats as well as the fauna of the medical mollusca collected were analyzed. A total of 5,211 specimens were collected, which belonged to 2 classes, 14 families, 18 genera and 25 species, including Oncomelania hupensis hupensis, Pomacea canaliculata, Parafossarulus striatulus, Alocinma longicornis, Physa acuta, Galba pervia, Hippeutis cantori, etc. The species numbers of medical mollusca in Chongming, Jinshan, Pudong new area and Qingpu districts (counties) were 22, 22, 21 and 20, respectively, which were more than those of other areas. The habitat analysis suggested that the species numbers in the river and wetland were the most, both of which were 14 species. The main faunas of the medical mollusca in Shanghai were the cosmopolitan and oriental species. The freshwater gastropod species are paucity in Shanghai City, but almost of them can be served as the intermediate hosts of certain parasites to transmit snail-related parasitic diseases, so the surveillance of medical mollusca should be strengthened.

A Model Ordinance for Cable Television for the City of Chicago.

ERIC Educational Resources Information Center

Better Broadcasting Council, Chicago, IL.

This proposal lays out terms for the granting and regulation of cable television franchises for the city of Chicago. The responsibility of franchisees to the public is outlined. The structure and supervisory responsibilities of the Cable Television Commission are described, and the role of the mayor and city council members is suggested. With…

Crowdsourced Smart Cities versus Corporate Smart Cities

NASA Astrophysics Data System (ADS)

Alizadeh, Tooran

2018-05-01

Considering the speedy growth of smart-city promises and practices, there is an urgent need to take a critical approach and offer an integrated vision for an otherwise fragmented and sectoral concept. In particular, the literature warns about a critical deficit around the theorization of the smart city because discussions of relevant smart city theories or frameworks are few and fall short of offering alternative practical resolutions to the dominant discourse. In developing a response to such a deficit, this paper takes up the challenge to broaden theoretical insights into smart cities, by offering a bottom-up understanding of the ‘smart city’ concept with special attention to the potential of passive crowdsourcing based on the ocean of mostly untapped and unutilized available data in the public domain. Crowdsourced smart cities are proposed as an alternative to enable public engagement in smart city debates and decision-making – especially when dealing with global digital corporations.

Analyzing the efficiency of short-term air quality plans in European cities, using the CHIMERE air quality model.

PubMed

Thunis, P; Degraeuwe, B; Pisoni, E; Meleux, F; Clappier, A

2017-01-01

Regional and local authorities have the obligation to design air quality plans and assess their impacts when concentration levels exceed the limit values. Because these limit values cover both short- (day) and long-term (year) effects, air quality plans also follow these two formats. In this work, we propose a methodology to analyze modeled air quality forecast results, looking at emission reduction for different sectors (residential, transport, agriculture, etc.) with the aim of supporting policy makers in assessing the impact of short-term action plans. Regarding PM 10 , results highlight the diversity of responses across European cities, in terms of magnitude and type that raises the necessity of designing area-specific air quality plans. Action plans extended from 1 to 3 days (i.e., emissions reductions applied for 24 and 72 h, respectively) point to the added value of trans-city coordinated actions. The largest benefits are seen in central Europe (Vienna, Prague) while major cities (e.g., Paris) already solve a large part of the problem on their own. Eastern Europe would particularly benefit from plans based on emission reduction in the residential sectors; while in northern cities, agriculture seems to be the key sector on which to focus attention. Transport is playing a key role in most cities whereas the impact of industry is limited to a few cities in south-eastern Europe. For NO 2 , short-term action plans focusing on traffic emission reductions are efficient in all cities. This is due to the local character of this type of pollution. It is important, however, to stress that these results remain dependent on the selected months available for this study.

Is a healthy city also an age-friendly city?

PubMed

Jackisch, Josephine; Zamaro, Gianna; Green, Geoff; Huber, Manfred

2015-06-01

Healthy Ageing is an important focus of the European Healthy Cities Network and has been supported by WHO since 2003 as a key strategic topic, since 2010 in cooperation with the Global Network of Age-friendly Cities and Communities. Based on the methodology of realist evaluation, this article synthesizes qualitative evidence from 33 structured case studies (CS) from 32 WHO European Healthy Cities, 72 annual reports from Network cities and 71 quantitative responses to a General Evaluation Questionnaire. City cases are assigned to three clusters containing the eight domains of an age-friendly city proposed by WHO's Global Age-friendly City Guide published in 2007. The analysis of city's practice and efforts in this article takes stock of how cities have developed the institutional prerequisites and processes necessary for implementing age-friendly strategies, programmes and projects. A content analysis of the CS maps activities across age-friendly domains and illustrates how cities contribute to improving the social and physical environments of older people and enhance the health and social services provided by municipalities and their partners. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Model based high NA anamorphic EUV RET

NASA Astrophysics Data System (ADS)

Jiang, Fan; Wiaux, Vincent; Fenger, Germain; Clifford, Chris; Liubich, Vlad; Hendrickx, Eric

2018-03-01

With the announcement of the extension of the Extreme Ultraviolet (EUV) roadmap to a high NA lithography tool that utilizes anamorphic optics design, an investigation of design tradeoffs unique to the imaging of anamorphic lithography tool is shown. An anamorphic optical proximity correction (OPC) solution has been developed that models fully the EUV near field electromagnetic effects and the anamorphic imaging using the Domain Decomposition Method (DDM). Clips of imec representative for the N3 logic node were used to demonstrate the OPC solutions on critical layers that will benefit from the increased contrast at high NA using anamorphic imaging. However, unlike isomorphic case, from wafer perspective, OPC needs to treat x and y differently. In the paper, we show a design trade-off seen unique to Anamorphic EUV, namely that using a mask rule of 48nm (mask scale), approaching current state of the art, limitations are observed in the available correction that can be applied to the mask. The metal pattern has a pitch of 24nm and CD of 12nm. During OPC, the correction of the metal lines oriented vertically are being limited by the mask rule of 12nm 1X. The horizontally oriented lines do not suffer from this mask rule limitation as the correction is allowed to go to 6nm 1X. For this example, the masks rules will need to be more aggressive to allow complete correction, or design rules and wafer processes (wafer rotation) would need to be created that utilize the orientation that can image more aggressive features. When considering VIA or block level correction, aggressive polygon corner to corner designs can be handled with various solutions, including applying a 45 degree chop. Multiple solutions are discussed with the metrics of edge placement error (EPE) and Process Variation Bands (PVBands), together with all the mask constrains. Noted in anamorphic OPC, the 45 degree chop is maintained at the mask level to meet mask manufacturing constraints, but results in skewed

Comparison of source apportionment of PM2.5 using receptor models in the main hub port city of East Asia: Busan

NASA Astrophysics Data System (ADS)

Jeong, Ju-Hee; Shon, Zang-Ho; Kang, Minsung; Song, Sang-Keun; Kim, Yoo-Keun; Park, Jinsoo; Kim, Hyunjae

2017-01-01

The contributions of various PM2.5 emission sources to ambient PM2.5 levels during 2013 in the main hub port city (Busan, South Korea) of East Asia was quantified using several receptor modeling techniques. Three receptor models of principal component analysis/absolute principal component score (PCA/APCS), positive matrix factorization (PMF), and chemical mass balance (CMB) were used to apportion the source of PM2.5 obtained from the target city. The results of the receptor models indicated that the secondary formation of PM2.5 was the dominant (45-60%) contributor to PM2.5 levels in the port city of Busan. The PMF and PCA/APCS suggested that ship emission was a non-negligible contributor of PM2.5 (up to about 10%) in the study area, whereas it was a negligible contributor based on CMB. The magnitude of source contribution estimates to PM2.5 levels differed significantly among these three models due to their limitations (e.g., PM2.5 emission source profiles and restrictions of the models). Potential source contribution function and concentration-weighted trajectory analyses indicated that long-range transport from sources in the eastern China and Yellow Sea contributed significantly to the level of PM2.5 in Busan.

Model of cyclist accident characteristics in the city of Malang and Blitar

NASA Astrophysics Data System (ADS)

Arifin, M. Z.; Agustin, I. W.

2018-01-01

Utilization of bicycles as an environmentally friendly mode of transportation is reconcerned as the development of sustainable transportation programs. The use of bicycles in some developed countries such as the Netherlands is 27 per cent of total travel, while for developing countries such as Indonesia, cyclists are less than 1% of total travel with low educated characteristics (65 per cent) and low income (48 per cent). Cyclist reduces dependencies on petroleum and environmental pollution as well as lessen the occurrence of congestion and traffic accidents involving motor vehicles. It was necessary to know the behavior and interaction of bicycle riders with other vehicle users in a heterogeneous traffic flow. The main purpose of the research is to create a model of bicycle accidents to increase the road traffic safety in Malang city and Blitar city. The research used analyses of frequency, the road’s level of service, and multiple linear regression. The results showed that there was a need for a development basis of a special lane for bicycle. It aims to reduce the level and number of cyclist accidents and to achieve transportation safety as well as to raise public awareness in traffic safety.

Development and testing of meteorology and air dispersion models for Mexico City

NASA Astrophysics Data System (ADS)

Williams, M. D.; Brown, M. J.; Cruz, X.; Sosa, G.; Streit, G.

Los Alamos National Laboratory and Instituto Mexicano del Petróleo are completing a joint study of options for improving air quality in Mexico City. We have modified a three-dimensional, prognostic, higher-order turbulence model for atmospheric circulation (HOTMAC) and a Monte Carlo dispersion and transport model (RAPTAD) to treat domains that include an urbanized area. We used the meteorological model to drive models which describe the photochemistry and air transport and dispersion. The photochemistry modeling is described in a separate paper. We tested the model against routine measurements and those of a major field program. During the field program, measurements included: (1) lidar measurements of aerosol transport and dispersion, (2) aircraft measurements of winds, turbulence, and chemical species aloft, (3) aircraft measurements of skin temperatures, and (4) Tethersonde measurements of winds and ozone. We modified the meteorological model to include provisions for time-varying synoptic-scale winds, adjustments for local wind effects, and detailed surface-coverage descriptions. We developed a new method to define mixing-layer heights based on model outputs. The meteorology and dispersion models were able to provide reasonable representations of the measurements and to define the sources of some of the major uncertainties in the model-measurement comparisons.

Painful Na-channelopathies: an expanding universe.

PubMed

Waxman, Stephen G

2013-07-01

The universe of painful Na-channelopathies--human disorders caused by mutations in voltage-gated sodium channels--has recently expanded in three dimensions. We now know that mutations of sodium channels cause not only rare genetic 'model disorders' such as inherited erythromelalgia and channelopathy-associated insensitivity to pain but also common painful neuropathies. We have learned that mutations of NaV1.8, as well as mutations of NaV1.7, can cause painful Na-channelopathies. Moreover, recent studies combining atomic level structural models and pharmacogenomics suggest that the goal of genomically guided pain therapy may not be unrealistic. Copyright © 2013 Elsevier Ltd. All rights reserved.

Education Cities

ERIC Educational Resources Information Center

Shaked, Haim

2014-01-01

In recent years, several cities in Israel have labeled themselves "Education Cities," concentrating on education as their central theme. Employing qualitative techniques, this article aims to describe, define, and conceptualize this phenomenon as it is being realized in three such cities. Findings show that Education Cities differ from…

Measurements of traffic emissions over a medium-sized city using long-path measurements and comparison against bottom-up city estimates

NASA Astrophysics Data System (ADS)

Waxman, E.; Cossel, K.; Truong, G. W.; Giorgetta, F.; Swann, W.; Coddington, I.; Newbury, N.

2017-12-01

Understanding emissions from cities is increasingly important as a growing fraction of the world's population moves to cities. Here we use a novel technology, dual frequency comb spectroscopy, to measure city emissions using a long outdoor open path. We simultaneously measured CO2, CH4, and H2O over the city of Boulder, Colorado and over a clean-air reference path for two months in the fall of 2016. Because of the spatial coverage of our measurements, the layout of the city and power plant locations, and the predominant wind direction, our measurements primarily pick up vehicle emissions. We choose two days with consistent CO2 enhancements over the city relative to the reference path and use a simple 0-D box model to calculate city emissions for these days. We scale these up to annual emissions and compare our measurements with the City of Boulder bottom-up vehicle emissions inventory based on total vehicle miles traveled, fuel efficiency, and vehicle type distribution. We find good agreement (within about a factor of two) between our top-down measurements and the city's bottom-up inventory value.

Comparison of WinSLAMM Modeled Results with Monitored Bioinfiltration Data during Kansas City Green Infrastructure Demonstration Project

EPA Science Inventory

The Water Services Department (WSD) in Kansas City, Missouri (KCMO) has conducted extensive modeling and economic studies of its combined sewer system (CSS) over the last several years. A number of green infrastructure (GI) solutions were identified and constructed to reduce dis...

Pilot Survey of Young African American Males in Four Cities.

ERIC Educational Resources Information Center

Harris (Louis) and Associates, Inc., New York, NY.

A pilot survey was conducted to explore why some young African American men living in cities stay in high school and why others drop out. Between October 1993 and March 1994, face-to-face interviews were conducted with 360 young black men aged 17 to 22, randomly drawn from census tracts in New York (New York), Chicago (Illinois), Los Angeles…

Efficient Scavenging of Solar and Wind Energies in a Smart City.

PubMed

Wang, Shuhua; Wang, Xue; Wang, Zhong Lin; Yang, Ya

2016-06-28

To realize the sustainable energy supply in a smart city, it is essential to maximize energy scavenging from the city environments for achieving the self-powered functions of some intelligent devices and sensors. Although the solar energy can be well harvested by using existing technologies, the large amounts of wasted wind energy in the city cannot be effectively utilized since conventional wind turbine generators can only be installed in remote areas due to their large volumes and safety issues. Here, we rationally design a hybridized nanogenerator, including a solar cell (SC) and a triboelectric nanogenerator (TENG), that can individually/simultaneously scavenge solar and wind energies, which can be extensively installed on the roofs of the city buildings. Under the same device area of about 120 mm × 22 mm, the SC can deliver a largest output power of about 8 mW, while the output power of the TENG can be up to 26 mW. Impedance matching between the SC and TENG has been achieved by using a transformer to decrease the impedance of the TENG. The hybridized nanogenerator has a larger output current and a better charging performance than that of the individual SC or TENG. This research presents a feasible approach to maximize solar and wind energies scavenging from the city environments with the aim to realize some self-powered functions in smart city.

Application and evaluation of forecasting methods for municipal solid waste generation in an Eastern-European city.

PubMed

Rimaityte, Ingrida; Ruzgas, Tomas; Denafas, Gintaras; Racys, Viktoras; Martuzevicius, Dainius

2012-01-01

Forecasting of generation of municipal solid waste (MSW) in developing countries is often a challenging task due to the lack of data and selection of suitable forecasting method. This article aimed to select and evaluate several methods for MSW forecasting in a medium-scaled Eastern European city (Kaunas, Lithuania) with rapidly developing economics, with respect to affluence-related and seasonal impacts. The MSW generation was forecast with respect to the economic activity of the city (regression modelling) and using time series analysis. The modelling based on social-economic indicators (regression implemented in LCA-IWM model) showed particular sensitivity (deviation from actual data in the range from 2.2 to 20.6%) to external factors, such as the synergetic effects of affluence parameters or changes in MSW collection system. For the time series analysis, the combination of autoregressive integrated moving average (ARIMA) and seasonal exponential smoothing (SES) techniques were found to be the most accurate (mean absolute percentage error equalled to 6.5). Time series analysis method was very valuable for forecasting the weekly variation of waste generation data (r (2) > 0.87), but the forecast yearly increase should be verified against the data obtained by regression modelling. The methods and findings of this study may assist the experts, decision-makers and scientists performing forecasts of MSW generation, especially in developing countries.

Contributions to cities' ambient particulate matter (PM): A systematic review of local source contributions at global level

NASA Astrophysics Data System (ADS)

Karagulian, Federico; Belis, Claudio A.; Dora, Carlos Francisco C.; Prüss-Ustün, Annette M.; Bonjour, Sophie; Adair-Rohani, Heather; Amann, Markus

2015-11-01

For reducing health impacts from air pollution, it is important to know the sources contributing to human exposure. This study systematically reviewed and analysed available source apportionment studies on particulate matter (of diameter of 10 and 2.5 microns, PM10 and PM2.5) performed in cities to estimate typical shares of the sources of pollution by country and by region. A database with city source apportionment records, estimated with the use of receptor models, was also developed and available at the website of the World Health Organization. Systematic Scopus and Google searches were performed to retrieve city studies of source apportionment for particulate matter. Six source categories were defined. Country and regional averages of source apportionment were estimated based on city population weighting. A total of 419 source apportionment records from studies conducted in cities of 51 countries were used to calculate regional averages of sources of ambient particulate matter. Based on the available information, globally 25% of urban ambient air pollution from PM2.5 is contributed by traffic, 15% by industrial activities, 20% by domestic fuel burning, 22% from unspecified sources of human origin, and 18% from natural dust and salt. The available source apportionment records exhibit, however, important heterogeneities in assessed source categories and incompleteness in certain countries/regions. Traffic is one important contributor to ambient PM in cities. To reduce air pollution in cities and the substantial disease burden it causes, solutions to sustainably reduce ambient PM from traffic, industrial activities and biomass burning should urgently be sought. However, further efforts are required to improve data availability and evaluation, and possibly to combine with other types of information in view of increasing usefulness for policy making.

Analysis of carbon monoxide (CO) with Delhi Finite Line Source (DFLS) in MT Haryono Street, Medan City

NASA Astrophysics Data System (ADS)

Turmuzi, M.; Suryati, I.; Mashaly, E. T.; Batubara, F.

2018-02-01

One source to decrease urban air ambient quality is transportation sector. Important pollutants are released by gas emissions from vehicles are carbon monoxide (CO), hydrocarbons (HC), nitrogen dioxide (NO2), particulate matter and others. The presence of CO pollutants in the ambient air can be predicted by modeling air quality. This study aims to estimate CO concentration resulting from transportation activities using Delhi Finite Line Source (DFLS) model, comparing CO prediction using a DFLS model with CO observation in the field, and determine the suitability of the DFLS model application on the MT Haryono street in Medan City. Research was conducted for 3 days at two sample points with frequency twice daily. Based on research results, the range of CO concentration from observation between 22.903 μg/m3 - 27.484 μg/m3. CO observation is still below the ambient air quality standard. According to the DFLS calculations, the range of CO concentration between 1.499 μg/m3- 2.051 μg/m3. The calculation index of agreement (IOA) validation test obtained value of d = 0.22. The DFLS model is not suitable to be applied on MT Haryono street because many factors affected such as wind direction and wind velocity, ambient air temperature and humidity

IL-22 is required for Th17 cell-mediated pathology in a mouse model of psoriasis-like skin inflammation.

PubMed

Ma, Hak-Ling; Liang, Spencer; Li, Jing; Napierata, Lee; Brown, Tom; Benoit, Stephen; Senices, Mayra; Gill, Davinder; Dunussi-Joannopoulos, Kyriaki; Collins, Mary; Nickerson-Nutter, Cheryl; Fouser, Lynette A; Young, Deborah A

2008-02-01

Psoriasis is a chronic skin disease resulting from the dysregulated interplay between keratinocytes and infiltrating immune cells. We report on a psoriasis-like disease model, which is induced by the transfer of CD4(+)CD45RB(hi)CD25(-) cells to pathogen-free scid/scid mice. Psoriasis-like lesions had elevated levels of antimicrobial peptide and proinflammatory cytokine mRNA. Also, similar to psoriasis, disease progression in this model was dependent on the p40 common to IL-12 and IL-23. To investigate the role of IL-22, a Th17 cytokine, in disease progression, mice were treated with IL-22-neutralizing antibodies. Neutralization of IL-22 prevented the development of disease, reducing acanthosis (thickening of the skin), inflammatory infiltrates, and expression of Th17 cytokines. Direct administration of IL-22 into the skin of normal mice induced both antimicrobial peptide and proinflammatory cytokine gene expression. Our data suggest that IL-22, which acts on keratinocytes and other nonhematopoietic cells, is required for development of the autoreactive Th17 cell-dependent disease in this model of skin inflammation. We propose that IL-22 antagonism might be a promising therapy for the treatment of human psoriasis.

Long range intermolecular interactions between the alkali diatomics Na2, K2, and NaK

NASA Astrophysics Data System (ADS)

Zemke, Warren T.; Byrd, Jason N.; Michels, H. Harvey; Montgomery, John A.; Stwalley, William C.

2010-06-01

Long range interactions between the ground state alkali diatomics Na2-Na2, K2-K2, Na2-K2, and NaK-NaK are examined. Interaction energies are first determined from ab initio calculations at the coupled-cluster with singles, doubles, and perturbative triples [CCSD(T)] level of theory, including counterpoise corrections. Long range energies calculated from diatomic molecular properties (polarizabilities and dipole and quadrupole moments) are then compared with the ab initio energies. A simple asymptotic model potential ELR=Eelec+Edisp+Eind is shown to accurately represent the intermolecular interactions for these systems at long range.

Ecological connectivity networks in rapidly expanding cities.

PubMed

Nor, Amal Najihah M; Corstanje, Ron; Harris, Jim A; Grafius, Darren R; Siriwardena, Gavin M

2017-06-01

Urban expansion increases fragmentation of the landscape. In effect, fragmentation decreases connectivity, causes green space loss and impacts upon the ecology and function of green space. Restoration of the functionality of green space often requires restoring the ecological connectivity of this green space within the city matrix. However, identifying ecological corridors that integrate different structural and functional connectivity of green space remains vague. Assessing connectivity for developing an ecological network by using efficient models is essential to improve these networks under rapid urban expansion. This paper presents a novel methodological approach to assess and model connectivity for the Eurasian tree sparrow ( Passer montanus ) and Yellow-vented bulbul ( Pycnonotus goiavier ) in three cities (Kuala Lumpur, Malaysia; Jakarta, Indonesia and Metro Manila, Philippines). The approach identifies potential priority corridors for ecological connectivity networks. The study combined circuit models, connectivity analysis and least-cost models to identify potential corridors by integrating structure and function of green space patches to provide reliable ecological connectivity network models in the cities. Relevant parameters such as landscape resistance and green space structure (vegetation density, patch size and patch distance) were derived from an expert and literature-based approach based on the preference of bird behaviour. The integrated models allowed the assessment of connectivity for both species using different measures of green space structure revealing the potential corridors and least-cost pathways for both bird species at the patch sites. The implementation of improvements to the identified corridors could increase the connectivity of green space. This study provides examples of how combining models can contribute to the improvement of ecological networks in rapidly expanding cities and demonstrates the usefulness of such models for

A CityGML Extension for Handling Very Large Tins

NASA Astrophysics Data System (ADS)

Kumar, K.; Ledoux, H.; Stoter, J.

2016-10-01

In addition to buildings, the terrain forms an important part of a 3D city model. Although in GIS terrains are usually represented with 2D grids, TINs are also increasingly being used in practice. One example is 3DTOP10NL, the 3D city model covering the whole of the Netherlands, which stores the relief with a constrained TIN containing more than 1 billion triangles. Due to the massive size of such datasets, the main problem that arises is: how to efficiently store and maintain them? While CityGML supports the storage of TINs, we argue in this paper that the current solution is not adequate. For instance, the 1 billion+ triangles of 3DTOP10NL require 686 GB of storage space with CityGML. Furthermore, the current solution does not store the topological relationships of the triangles, and also there are no clear mechanisms to handle several LODs. We propose in this paper a CityGML extension for the compact representation of terrains. We describe our abstract and implementation specifications (modelled in UML), and our prototype implementation to convert TINs to our CityGML structure. It increases the topological relationships that are explicitly represented, and allows us to compress up to a factor of ∼ 25 in our experiments with massive real-world terrains (more than 1 billion triangles).

Influence of exposure differences on city-to-city heterogeneity ...

EPA Pesticide Factsheets

Multi-city population-based epidemiological studies have observed heterogeneity between city-specific fine particulate matter (PM2.5)-mortality effect estimates. These studies typically use ambient monitoring data as a surrogate for exposure leading to potential exposure misclassification. The level of exposure misclassification can differ by city affecting the observed health effect estimate. The objective of this analysis is to evaluate whether previously developed residential infiltration-based city clusters can explain city-to-city heterogeneity in PM2.5 mortality risk estimates. In a prior paper 94 cities were clustered based on residential infiltration factors (e.g. home age/size, prevalence of air conditioning (AC)), resulting in 5 clusters. For this analysis, the association between PM2.5 and all-cause mortality was first determined in 77 cities across the United States for 2001–2005. Next, a second stage analysis was conducted evaluating the influence of cluster assignment on heterogeneity in the risk estimates. Associations between a 2-day (lag 0–1 days) moving average of PM2.5 concentrations and non-accidental mortality were determined for each city. Estimated effects ranged from −3.2 to 5.1% with a pooled estimate of 0.33% (95% CI: 0.13, 0.53) increase in mortality per 10 μg/m3 increase in PM2.5. The second stage analysis determined that cluster assignment was marginally significant in explaining the city-to-city heterogeneity. The health effe

[Demography of Mexico City. The same problems with less population].

PubMed

Camposortega Cruz, S

1991-01-01

The Mexico City metropolitan area currently extends over 4451.2 sq km, completely covering the Federal District and 27 municipios in the state of Mexico. The current population of the Mexico City metropolitan area is estimated at about 16.1 million and its growth rate at approximately 2%/year. The crude birth rate is 24/1000 and the crude death rate 6/1000. The metropolitan Mexico City population represents 18.6% of the total Mexican population. Mexico's other large cities fall far behind in total population, Guadalajara with 3.16 million, Monterrey with 2.77 million, and Puebla with 1.5 million. Mexico City is 1 of the 5 largest cities of the world. Estimates of the current Mexico City population differ substantially from projections completed in the 1980s, which calculated populations of 19-22 million. The explanation of the difference lies primarily in overestimation of the metropolitan population in the 1980 census, the basis for the projections. Preliminary data from the 1990 census, data from the 1987 National Fertility and Health Survey, vital statistics, and some data on internal migration allow a preliminary correction of calculations relating to Mexico's population dynamics. During the 20th century, Mexico City's population has grown from 345,000 in 1900 to 1,029,000 in 1930, 3,136,000 in 1950, 9,045,000 in 1970, and 15,785,000 in 1990. The most rapid growth occurred in 1930-70, when the population grew by more than 5% annually. The growth rate declined to 3.65% between 1970-80 and according to preliminary estimated to 1.92% in 1980-90. Factors explaining the declining growth rate may include the fertility decline in Mexico City, reorientation of migration away from Mexico City and toward inntermediate cities with under 1 million inhabitants, and departures from Mexico City caused by the 1985 earthquakes, private and public decentralization policies, pollution, and other factos which have reduced the attractiveness of the capital. The reevised

Greenhouse gas emission footprints and energy use benchmarks for eight U.S. cities.

PubMed

Hillman, Tim; Ramaswami, Anu

2010-03-15

A hybrid life cycle-based trans-boundary greenhouse gas (GHG) emissions footprint is elucidated at the city-scale and evaluated for 8 US cities. The method incorporates end-uses of energy within city boundaries, plus cross-boundary demand for airline/freight transport and embodied energy of four key urban materials [food, water, energy (fuels), and shelter (cement)], essential for life in all cities. These cross-boundary activities contributed 47% on average more than the in-boundary GHG contributions traditionally reported for cities, indicating significant truncation at city boundaries of GHG emissions associated with urban activities. Incorporating cross-boundary contributions created convergence in per capita GHG emissions from the city-scale (average 23.7 mt-CO(2)e/capita) to the national-scale (24.5 mt-CO(2)e/capita), suggesting that six key cross-boundary activities may suffice to yield a holistic GHG emission footprint for cities, with important policy ramifications. Average GHG contributions from various human activity sectors include buildings/facilities energy use (47.1%), regional surface transport (20.8%), food production (14.7%), transport fuel production (6.4%), airline transport (4.8%), long-distance freight trucking (2.8%), cement production (2.2%), and water/wastewater/waste processing (1.3%). Energy-, travel-, and key materials-consumption efficiency metrics are elucidated in these sectors; these consumption metrics are observed to be largely similar across the eight U.S. cities and consistent with national/regional averages.

Numerical groundwater-flow model of the Minnelusa and Madison hydrogeologic units in the Rapid City area, South Dakota

USGS Publications Warehouse

Putnam, Larry D.; Long, Andrew J.

2009-01-01

The city of Rapid City and other water users in the Rapid City area obtain water supplies from the Minnelusa and Madison aquifers, which are contained in the Minnelusa and Madison hydrogeologic units. A numerical groundwater-flow model of the Minnelusa and Madison hydrogeologic units in the Rapid City area was developed to synthesize estimates of water-budget components and hydraulic properties, and to provide a tool to analyze the effect of additional stress on water-level altitudes within the aquifers and on discharge to springs. This report, prepared in cooperation with the city of Rapid City, documents a numerical groundwater-flow model of the Minnelusa and Madison hydrogeologic units for the 1,000-square-mile study area that includes Rapid City and the surrounding area. Water-table conditions generally exist in outcrop areas of the Minnelusa and Madison hydrogeologic units, which form generally concentric rings that surround the Precambrian core of the uplifted Black Hills. Confined conditions exist east of the water-table areas in the study area. The Minnelusa hydrogeologic unit is 375 to 800 feet (ft) thick in the study area with the more permeable upper part containing predominantly sandstone and the less permeable lower part containing more shale and limestone than the upper part. Shale units in the lower part generally impede flow between the Minnelusa hydrogeologic unit and the underlying Madison hydrogeologic unit; however, fracturing and weathering may result in hydraulic connections in some areas. The Madison hydrogeologic unit is composed of limestone and dolomite that is about 250 to 610 ft thick in the study area, and the upper part contains substantial secondary permeability from solution openings and fractures. Recharge to the Minnelusa and Madison hydrogeologic units is from streamflow loss where streams cross the outcrop and from infiltration of precipitation on the outcrops (areal recharge). MODFLOW-2000, a finite-difference groundwater

STEMS-Air: a simple GIS-based air pollution dispersion model for city-wide exposure assessment.

PubMed

Gulliver, John; Briggs, David

2011-05-15

Current methods of air pollution modelling do not readily meet the needs of air pollution mapping for short-term (i.e. daily) exposure studies. The main limiting factor is that for those few models that couple with a GIS there are insufficient tools for directly mapping air pollution both at high spatial resolution and over large areas (e.g. city wide). A simple GIS-based air pollution model (STEMS-Air) has been developed for PM(10) to meet these needs with the option to choose different exposure averaging periods (e.g. daily and annual). STEMS-Air uses the grid-based FOCALSUM function in ArcGIS in conjunction with a fine grid of emission sources and basic information on meteorology to implement a simple Gaussian plume model of air pollution dispersion. STEMS-Air was developed and validated in London, UK, using data on concentrations of PM(10) from routinely available monitoring data. Results from the validation study show that STEMS-Air performs well in predicting both daily (at four sites) and annual (at 30 sites) concentrations of PM(10). For daily modelling, STEMS-Air achieved r(2) values in the range 0.19-0.43 (p<0.001) based solely on traffic-related emissions and r(2) values in the range 0.41-0.63 (p<0.001) when adding information on 'background' levels of PM(10). For annual modelling of PM(10), the model returned r(2) in the range 0.67-0.77 (P<0.001) when compared with monitored concentrations. The model can thus be used for rapid production of daily or annual city-wide air pollution maps either as a screening process in urban air quality planning and management, or as the basis for health risk assessment and epidemiological studies. Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.

The mitochondrial import gene tomm22 is specifically required for hepatocyte survival and provides a liver regeneration model

PubMed Central

Curado, Silvia; Ober, Elke A.; Walsh, Susan; Cortes-Hernandez, Paulina; Verkade, Heather; Koehler, Carla M.; Stainier, Didier Y. R.

2010-01-01

SUMMARY Understanding liver development should lead to greater insights into liver diseases and improve therapeutic strategies. In a forward genetic screen for genes regulating liver development in zebrafish, we identified a mutant – oliver – that exhibits liver-specific defects. In oliver mutants, the liver is specified, bile ducts form and hepatocytes differentiate. However, the hepatocytes die shortly after their differentiation, and thus the resulting mutant liver consists mainly of biliary tissue. We identified a mutation in the gene encoding translocase of the outer mitochondrial membrane 22 (Tomm22) as responsible for this phenotype. Mutations in tomm genes have been associated with mitochondrial dysfunction, but most studies on the effect of defective mitochondrial protein translocation have been carried out in cultured cells or unicellular organisms. Therefore, the tomm22 mutant represents an important vertebrate genetic model to study mitochondrial biology and hepatic mitochondrial diseases. We further found that the temporary knockdown of Tomm22 levels by morpholino antisense oligonucleotides causes a specific hepatocyte degeneration phenotype that is reversible: new hepatocytes repopulate the liver as Tomm22 recovers to wild-type levels. The specificity and reversibility of hepatocyte ablation after temporary knockdown of Tomm22 provides an additional model to study liver regeneration, under conditions where most hepatocytes have died. We used this regeneration model to analyze the signaling commonalities between hepatocyte development and regeneration. PMID:20483998

Role of City Texture in Urban Heat Islands at Nighttime

NASA Astrophysics Data System (ADS)

Sobstyl, J. M.; Emig, T.; Qomi, M. J. Abdolhosseini; Ulm, F.-J.; Pellenq, R. J.-M.

2018-03-01

An urban heat island (UHI) is a climate phenomenon that results in an increased air temperature in cities when compared to their rural surroundings. In this Letter, the dependence of an UHI on urban geometry is studied. Multiyear urban-rural temperature differences and building footprints data combined with a heat radiation scaling model are used to demonstrate for more than 50 cities worldwide that city texture—measured by a building distribution function and the sky view factor—explains city-to-city variations in nocturnal UHIs. Our results show a strong correlation between nocturnal UHIs and the city texture.

Role of City Texture in Urban Heat Islands at Nighttime.

PubMed

Sobstyl, J M; Emig, T; Qomi, M J Abdolhosseini; Ulm, F-J; Pellenq, R J-M

2018-03-09

An urban heat island (UHI) is a climate phenomenon that results in an increased air temperature in cities when compared to their rural surroundings. In this Letter, the dependence of an UHI on urban geometry is studied. Multiyear urban-rural temperature differences and building footprints data combined with a heat radiation scaling model are used to demonstrate for more than 50 cities worldwide that city texture-measured by a building distribution function and the sky view factor-explains city-to-city variations in nocturnal UHIs. Our results show a strong correlation between nocturnal UHIs and the city texture.

300 Cities - An Exploration in Characterizing US Cities

DTIC Science & Technology

2008-06-01

10 . SPONSOR/MONITOR’S ACRONYM(S) 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 12. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release...divided into PMSA’s the entire area becomes a CMSA. Metro areas that are not subdivided are designated MSA’s. [ 10 ] (Page 2) 300 Cities CMU-ISR-08-122...considering the general population. 300 Cities CMU-ISR-08-122 - 10 - CASOS Report Figure 2: City Unique Diversity. Percent of city population composed of

City Reach Code Technical Support Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Athalye, Rahul A.; Chen, Yan; Zhang, Jian

This report describes and analyzes a set of energy efficiency measures that will save 20% energy over ASHRAE Standard 90.1-2013. The measures will be used to formulate a Reach Code for cities aiming to go beyond national model energy codes. A coalition of U.S. cities together with other stakeholders wanted to facilitate the development of voluntary guidelines and standards that can be implemented in stages at the city level to improve building energy efficiency. The coalition's efforts are being supported by the U.S. Department of Energy via Pacific Northwest National Laboratory (PNNL) and in collaboration with the New Buildings Institute.

22. Photographic copy enlargement from a 4x5 copy negative of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. Photographic copy enlargement from a 4x5 copy negative of a print. (Original print located on abandoned NASA site, currently owned by the City of Downey, Downey, California). 1954 USAF PLANT 16 AERIAL BUILDING 41 NORTH TO SOUTH. - NASA Industrial Plant, Missile Research Laboratory, 12214 Lakewood Boulevard, Downey, Los Angeles County, CA

Potencjał turystyczny Lublina jako czynnik rozwoju miasta na przestrzeni wieków

NASA Astrophysics Data System (ADS)

Kociuba, Dagmara; Kociuba, Waldemar

2009-01-01

Lublin is situated on eastern border of Nałęczów Plateau at three rivers' confluence, it is the very picturesque city with beautiful panoramic sights. On touristic attractiveness of city influence both the natural as well cultural values, in peculiarity the objects of the material culture which are the heritage of men of different nationalities and religions living here over the centuries. The touristic potential of Lublin showed the large changeability in time. It structural and functional supplies were changed. The division into periods of city's popularity was marked, from very large in XV-XVI and XIX-XXI century to smaller in period of the XVIII century. Last years the touristic policy activation was noticed which manifesting the intensification of marketing actings having on aim the enlargement the touristic attractiveness of city e.g. creating the mark of Lublin and the projects in frames of the Bug Euroregion. They are effective of elevation of the rank of cultural output e.g. acknowledgement of the Lublin's historical town-planning complex the title of Monument History, inclusion of Lublin to European programme "Intercultural Cities", or trying about acknowledgement in 2016 r. the title of European Capital of Culture.