Science.gov

Sample records for naphthenic petroleum distillates

  1. Synergy effect of naphthenic acid corrosion and sulfur corrosion in crude oil distillation unit

    NASA Astrophysics Data System (ADS)

    Huang, B. S.; Yin, W. F.; Sang, D. H.; Jiang, Z. Y.

    2012-10-01

    The synergy effect of naphthenic acid corrosion and sulfur corrosion at high temperature in crude oil distillation unit was studied using Q235 carbon-manganese steel and 316 stainless steel. The corrosion of Q235 and 316 in corrosion media containing sulfur and/or naphthenic acid at 280 °C was investigated by weight loss, scanning electron microscope (SEM), EDS and X-ray diffractometer (XRD) analysis. The results showed that in corrosion media containing only sulfur, the corrosion rate of Q235 and 316 first increased and then decreased with the increase of sulfur content. In corrosion media containing naphthenic acid and sulfur, with the variations of acid value or sulfur content, the synergy effect of naphthenic acid corrosion and sulfur corrosion has a great influence on the corrosion rate of Q235 and 316. It was indicated that the sulfur accelerated naphthenic acid corrosion below a certain sulfur content but prevented naphthenic acid corrosion above that. The corrosion products on two steels after exposure to corrosion media were investigated. The stable Cr5S8 phases detected in the corrosion products film of 316 were considered as the reason why 316 has greater corrosion resistance to that of Q235.

  2. Preparation of mesophase pitch by aromatics-rich distillate of naphthenic vacuum gas oil.

    PubMed

    Li, Ming; Liu, Dong; Du, Hui; Li, Qinyin; Hou, Xulian; Ye, Jiashun

    Two aromatics-rich distillates R1 and R2 with different properties from naphthenic base vacuum gas oil were used for preparing mesophase pitch through high-pressure thermal treatment. (1)H-NMR, FT-IR and VPO were employed to characterize the structural parameters of the raw materials. The products' optical texture and molecular structure were analyzed by polarized light optical microscopy, (1)H-NMR, FT-IR and XRD. The effect of raw materials' structure on the formation of mesophase pitch was discussed. The results showed that the structure of the raw material had an important effect on the formation of mesophase pitch. The raw material R2 with higher aromaticity, more naphthenic structure and less alkyl side chains was easy to form mesophase pitch with large-domains optical texture, lower softening point and more ordered crystal structure.

  3. Toxicology of petroleum naphtha distillate vapors.

    PubMed

    Wilson, F W

    1976-12-01

    A unique opportunity was presented to observe the potentially toxic effects of an acute exposure to the vapors of petroleum naphtha distillate on a relatively large number of individuals. The immediate manifestation in all was dyspnea. The action on motor vehicle combustion suggested that some of this could have been due to oxygen deprivation; however, all individuals were dyspneic for several minutes after exposure. A few were cyanotic for several minutes after exposure. All were excited. Tremulousness and mild nausea followed the initial symptoms but were of brief duration. One individual manifested numerous premature ventricular contractions. Since his exposure was brief and since none of the others showed similar findings, it is unlikely that the exposure was causal. The central nervous system depression described in acute exposure cases of the intact (not distillate) petroleum naphtha fumes was not observed in any of this series. There were no delayed manifestations or complications.

  4. Toxicity of petroleum hydrocarbon distillates to soil organisms.

    PubMed

    Cermak, Janet H; Stephenson, Gladys L; Birkholz, Detlef; Wang, Zhendi; Dixon, D George

    2010-12-01

    Canadian standards for petroleum hydrocarbons in soil are based on four distillate ranges (F1, C6-C10; F2, >C10-C16; F3, >C16-C34; and F4, >C34). Concerns have arisen that the ecological soil contact standards for F3 may be overly conservative. Oil distillates were prepared and characterized, and the toxicity of F3 and two subfractions, F3a (>C16-C23) and F3b (>C23-C34), to earthworms (Eisenia andrei), springtails (Orthonychiurus folsomi), and northern wheatgrass (Elymus lanceolatus), as well as the toxicity of F2 to earthworms, was determined. Clean soil was spiked with individual distillates and measured concentrations were determined for select tests. Results agree with previous studies with these distillates. Reported toxicities of crude and petroleum products to invertebrates were generally comparable to that of F3 and F3a. The decreasing order of toxicity was F3a > F3 > F3b with invertebrates, and F3a > F3b > F3 with plants. The toxicities of F3a and F3b were not sufficiently different to recommend regulating hydrocarbons based on these distillate ranges. The results also suggest that test durations may be insufficient for determining toxicity of higher distillate ranges, and that the selection of species and endpoints may significantly affect interpretation of toxicity test results.

  5. Naphthenic acids speciation and removal during petroleum-coke adsorption and ozonation of oil sands process-affected water.

    PubMed

    Gamal El-Din, Mohamed; Fu, Hongjing; Wang, Nan; Chelme-Ayala, Pamela; Pérez-Estrada, Leonidas; Drzewicz, Przemysław; Martin, Jonathan W; Zubot, Warren; Smith, Daniel W

    2011-11-01

    The Athabasca Oil Sands industry produces large volumes of oil sands process-affected water (OSPW) as a result of bitumen extraction and upgrading processes. Constituents of OSPW include chloride, naphthenic acids (NAs), aromatic hydrocarbons, and trace heavy metals, among other inorganic and organic compounds. To address the environmental issues associated with the recycling and/or safe return of OSPW into the environment, water treatment technologies are required. This study examined, for the first time, the impacts of pretreatment steps, including filtration and petroleum-coke adsorption, on ozonation requirements and performance. The effect of the initial OSPW pH on treatment performance, and the evolution of ozonation and its impact on OSPW toxicity and biodegradability were also examined. The degradation of more than 76% of total acid-extractable organics was achieved using a semi-batch ozonation system at a utilized ozone dose of 150 mg/L. With a utilized ozone dose of 100 mg/L, the treated OSPW became more biodegradable and showed no toxicity towards Vibrio fischeri. Changes in the NA profiles in terms of carbon number and number of rings were observed after ozonation. The filtration of the OSPW did not improve the ozonation performance. Petroleum-coke adsorption was found to be effective in reducing total acid-extractable organics by a 91%, NA content by an 84%, and OSPW toxicity from 4.3 to 1.1 toxicity units. The results of this study indicate that the combination of petroleum-coke adsorption and ozonation is a promising treatment approach to treat OSPW.

  6. Investigation of the toxicokinetics of petroleum hydrocarbon distillates with the earthworm Eisenia andrei.

    PubMed

    Cermak, Janet; Stephenson, Gladys; Birkholz, Detlef; Dixon, D George

    2013-04-01

    The Canada-wide standards for petroleum hydrocarbons in soils regulate petroleum hydrocarbons based on four distillate ranges: F1 (C6-C10), F2 (>C10-C16), F3 (>C16-C34), and F4 (>C34). Previous toxicity tests with earthworms and F2, as well as two subfractions of F3, F3a (>C16-C23) and F3a (>C23-C34), indicate that test durations might not be sufficiently long to reach threshold effect concentrations, likely because of the differing toxicokinetics for each distillate. A study was conducted to determine the toxicokinetics of both aliphatic and aromatic fractions of F2, F3a, and F3b with the earthworm Eisenia andrei. Peak accumulation curves were observed for F2 aliphatics and aromatics and F3a aromatics, likely as a result of changes in exposure concentration over the test duration via loss or a decrease in the bioavailable fraction. Biota-soil accumulation factors were >1 for total F2 aliphatics and aromatics and F3a aromatics as well as for several individual polyaromatic hydrocarbons for each distillate. Aromatics were disproportionately accumulated over aliphatics and were the main contributors to toxicity; therefore, aromatics and aliphatics should be regulated separately. The toxicokinetics were used to interpret previous toxicity data. Higher molecular weight distillates need longer-than-standard test durations to determine toxicity, so toxicity test results from fixed, standard-duration tests are not strictly comparable for these petroleum distillates.

  7. Microbial naphthenic Acid degradation.

    PubMed

    Whitby, Corinne

    2010-01-01

    Naphthenic acids (NAs) are an important group of trace organic pollutants predominantly comprising saturated aliphatic and alicyclic carboxylic acids. NAs are ubiquitous; occurring naturally in hydrocarbon deposits (petroleum, oil sands, bitumen, and crude oils) and also have widespread industrial uses. Consequently, NAs can enter the environment from both natural and anthropogenic processes. NAs are highly toxic, recalcitrant compounds that persist in the environment for many years, and it is important to develop efficient bioremediation strategies to decrease both their abundance and toxicity in the environment. However, the diversity of microbial communities involved in NA-degradation, and the mechanisms by which NAs are biodegraded, are poorly understood. This lack of knowledge is mainly due to the difficulties in identifying and purifying individual carboxylic acid compounds from complex NA mixtures found in the environment, for microbial biodegradation studies. This paper will present an overview of NAs, their origin and fate in the environment, and their toxicity to the biota. The review describes the microbial degradation of both naturally occurring and chemically synthesized NAs. Proposed pathways for aerobic NA biodegradation, factors affecting NA biodegradation rates, and possible bioremediation strategies are also discussed.

  8. Estimation of the vapor pressure of petroleum distillate fractions from gas chromatographic data

    SciTech Connect

    Eggertsen, F.T.; Nygard, N.R.; Nickoley, L.D.

    1980-11-01

    The vapor pressure of petroleum distillate fractions is estimated conveniently by applying ideal gas and solution laws to gas chromatographic data. The vapor pressure is computed as a summation of the partial pressures for carbon number groups in the chromatogram, each partial pressure being derived as the product of mole fraction, determined from the chromatogram, and saturation pressure, calculated using the Antoine equation. A rapid method of computation with a programmable calculator was used. The method assumes approximate conformance to Raoult's and Dalton's laws relating to partial pressures from a solution. The results generally agree well with values obtained manometrically. Advantages of the method are the general availability of suitable gas chromatographic equipment, convenience and speed of the procedure and calculations, applicability over a wide range of volatility, freedom from temperature equilibration problems, and small sample requirement. 4 figures, 6 tables.

  9. Carcinogenicity of petroleum lubricating oil distillates: effects of solvent refining, hydroprocessing, and blending.

    PubMed

    Halder, C A; Warne, T M; Little, R Q; Garvin, P J

    1984-01-01

    Certain refining processes were investigated to determine their influence on the dermal carcinogenic activity of petroleum-derived lubricating oil distillates. Specifically, the effects of solvent refining, hydroprocessing, a combination of both processes, and the blending of oils processed using each technique were evaluated in standard mouse skin-painting bioassays. The refining process used as well as the level or severity of treatment greatly influenced the carcinogenic outcome of processed lubricating oils. Solvent refining at severities normally used appeared to eliminate carcinogenicity. In contrast, hydroprocessing alone at mild levels of treatment was successful only in reducing the carcinogenic potency; severe hydroprocessing conditions were necessary to eliminate carcinogenic activity without the use of additional refining processes. Carcinogenic activity could also be eliminated by following moderate solvent refining with mild hydroprocessing. Blending of hydroprocessed oils with solvent-refined oils resulted in a substantial reduction or even elimination of carcinogenic activity. However, the degree of protection obtained varied with the particular distillates used and appeared largely dependent on the inherent biological activity of the hydroprocessed oil.

  10. A new procedure for the determination of distillation temperature distribution of high-boiling petroleum products and fractions.

    PubMed

    Boczkaj, Grzegorz; Przyjazny, Andrzej; Kamiński, Marian

    2011-03-01

    The distribution of distillation temperatures of liquid and semi-fluid products, including petroleum fractions and products, is an important process and practical parameter. It provides information on properties of crude oil and content of particular fractions, classified on the basis of their boiling points, as well as the optimum conditions of atmospheric or vacuum distillation. At present, the distribution of distillation temperatures is often investigated by simulated distillation (SIMDIS) using capillary gas chromatography (CGC) with a short capillary column with polydimethylsiloxane as the stationary phase. This paper presents the results of investigations on the possibility of replacing currently used CGC columns for SIMDIS with a deactivated fused silica capillary tube without any stationary phase. The SIMDIS technique making use of such an empty fused silica column allows a considerable lowering of elution temperature of the analytes, which results in a decrease of the final oven temperature while ensuring a complete separation of the mixture. This eliminates the possibility of decomposition of less thermally stable mixture components and bleeding of the stationary phase which would result in an increase of the detector signal. It also improves the stability of the baseline, which is especially important in the determination of the end point of elution, which is the basis for finding the final temperature of distillation. This is the key parameter for the safety process of hydrocracking, where an excessively high final temperature of distillation of a batch can result in serious damage to an expensive catalyst bed. This paper compares the distribution of distillation temperatures of the fraction from vacuum distillation of petroleum obtained using SIMDIS with that obtained by the proposed procedure. A good agreement between the two procedures was observed. In addition, typical values of elution temperatures of n-paraffin standards obtained by the two

  11. Aquatic hazard and biodegradability of light and middle atmospheric distillate petroleum streams.

    PubMed

    Swigert, James P; Lee, Carol; Wong, Diana C L; Podhasky, Paula

    2014-08-01

    Light and middle atmospheric distillate petroleum substances are blended to produce fuels used in transportation and heating. These substances represent the majority by volume of crude oil refined products in the United States. The goal of this research was to develop biodegradability and aquatic toxicity data for four substances; heavy, straight-run naphtha (HSRN), hydro-desulfurized kerosene (HDK), hydro-cracked gas oil (HCGO), and catalytic-cracked gas oil (CCGO). Ready biodegradability tests demonstrated rapid and extensive microbial oxidation of these test substances, indicating a lack of persistence in the aquatic environment. Differences in biodegradation patterns reflected compositional differences in the constituent hydrocarbons. Results of aquatic toxicity tests on alga, cladocera, and fish demonstrated that toxicity was greatest for catalytic-cracked gas oil, which contained a high proportion of aromatic hydrocarbons. Aromatic hydrocarbons are more soluble, and hence more bioavailable, resulting in higher toxicity. When expressed on the basis of loading rates, acute toxicity values (LL/EL50) ranged between 0.3 and 5.5 mg L(-1) for all three species, while chronic no-observed-effect loading rates (NOELR) ranged between 0.05 and 0.64 mg L(-1). PETROTOX estimates for acute and chronic toxicity ranged from 0.18 to 2.3 mg L(-1) and 0.06 to 0.14 mg L(-1), respectively, which were generally more conservative than experimental data.

  12. Aquatic hazard assessment of a commercial sample of naphthenic acids.

    PubMed

    Swigert, James P; Lee, Carol; Wong, Diana C L; White, Russell; Scarlett, Alan G; West, Charles E; Rowland, Steven J

    2015-04-01

    This paper presents chemical composition and aquatic toxicity characteristics of a commercial sample of naphthenic acids (NAs). Naphthenic acids are derived from the refining of petroleum middle distillates and can contribute to refinery effluent toxicity. NAs are also present in oil sands process-affected water (OSPW), but differences in the NAs compositions from these sources precludes using a common aquatic toxicity dataset to represent the aquatic hazards of NAs from both origins. Our chemical characterization of a commercial sample of NAs showed it to contain in order of abundance, 1-ring>2-ring>acyclic>3-ring acids (∼84%). Also present were monoaromatic acids (7%) and non-acids (9%, polyaromatic hydrocarbons and sulfur heterocyclic compounds). While the acyclic acids were only the third most abundant group, the five most abundant individual compounds were identified as C(10-14) n-acids (n-decanoic acid to n-tetradecanoic acid). Aquatic toxicity testing of fish (Pimephales promelas), invertebrate (Daphnia magna), algae (Pseudokirchneriella subcapitata), and bacteria (Vibrio fischeri) showed P. promelas to be the most sensitive species with 96-h LL50=9.0 mg L(-1) (LC50=5.6 mg L(-1)). Acute EL50 values for the other species ranged 24-46 mg L(-1) (EC50 values ranged 20-30 mg L(-1)). Biomimetic extraction via solid-phase-microextraction (BE-SPME) suggested a nonpolar narcosis mode of toxic action for D. magna, P. subcapitata, and V. fischeri. The BE analysis under-predicted fish toxicity, which indicates that a specific mode of action, besides narcosis, may be a factor for fishes.

  13. A review of the occurrence and fate of naphthenic acids in aquatic environments.

    PubMed

    Headley, John V; McMartin, Dena W

    2004-01-01

    Naphthenic acids are comprised of a large collection of saturated aliphatic and alicyclic carboxylic acids found in hydrocarbon deposits (petroleum, oil sands bitumen, and crude oils). Naphthenic acids enter surface water systems primarily through effluent discharge, but also through groundwater mixing and erosion of riverbank oil deposits. Of the possible environmental receptors (i.e., air, soil, and water), the most significant is water. Ambient levels of naphthenic acids in northern Alberta rivers in the Athabasca Oil Sands are generally below 1 mg L(-1). However, tailings pond waters may contain as high as 110 mg L(-1). The complexity of natural naphthenic acids in petroleum deposits poses an analytical challenge as reflected by the several techniques reported for quantitation of naphthenic acids in the environment. Although naphthenic acids are known to be persistent biomarkers used in identification of oil source maturation, little is established regarding their relative degradation pathways in aquatic environments. Published research related to the potential for microbiological degradation and adsorption to typical Athabasca Oil Sands soils reveal that naphthenic acids are likely to persist in the water column and, with prolonged exposure, accumulate in sediments. However, other than a very general knowledge of environmental persistence, the occurrence and fate of naphthenic acids has been sparsely studied. This article brings together some of those environmental persistence results, as well as detailed information regarding the origin of naphthenic acids in tailings ponds, chemistry and toxicological considerations, current analytical methods for aquatic sampling, and areas of future remediation research.

  14. Naphthenic acids and surrogate naphthenic acids in methanogenic microcosms.

    PubMed

    Holowenko, F M; Mackinnon, M D; Fedorak, P M

    2001-08-01

    Naphthenic acids (NAs) are a complex mixture of naturally occurring acyclic and cyclic aliphatic carboxylic acids in petroleum. In the Athabasca oil sands. NAs have been identified as the largest component of dissolved organic matter in the tailings waters from oils sands extraction processes. They are the major contributor to the acute toxicity of the fine tailings wastewaters at the oil sands extraction plants in northeastern Alberta, Canada. In this study, three sources of NAs were studied, including commercially available NAs, those extracted from oil sands process-affected waters, and individual naphthenic-like surrogate compounds. Analysis by gas chromatography-mass spectrometry demonstrated differences between the commercial and extracted NAs. The NAs derived from the process-affected waters showed a short-term inhibition of methanogenesis from H2 or acetate, but with time the populations resumed methane production. It has been postulated that microbial metabolism of the carboxylated side chains of NAs would lead to methane production. The two NA mixtures failed to stimulate methanogenesis in microcosms that contained either oil sands fine tailings or domestic sewage sludge. However, in microcosms with sewage sludge, methanogenesis was stimulated by some surrogate NAs including 3-cyclohexylpropanoic acid at 400-800 mg/L, 5-cyclohexylpentanoic acid at 200 mg/L or 6-phenylhexanoic acid at 200 and 400 mg/L. When added at 200 mg/L to methanogenic microcosms containing fine tailings, 3-cyclohexylpropanoic and 4-cyclohexylbutanoic acids produced methane yields that suggested mineralization of the side chain and the ring.

  15. NMR and GC/MS investigation of the saturate and distillate fractions from the Cerro Negro heavy petroleum crude

    SciTech Connect

    Netzel, D. A.; Guffey, F. D.

    1987-08-01

    Six fractions of the Cerro Negro heavy petroleum crude have been evaluated using nuclear magnetic resonance spectroscopy (NMR) and gas chromatography/mass spectrometry (GC/MS). The fractions include four saturated hydrocarbon distillate fractions distilling above 200/sup 0/C (200 to 425/sup 0/C (392 to 797/sup 0/F), 425 to 550/sup 0/C (797 to 1022/sup 0/F), 550 to 700/sup 0/C (1022 to 1292/sup 0/F), and >700/sup 0/C (>1292/sup 0/F)) and two distillate subfractions designated as <200/sup 0/C and >200/sup 0/C. The >700/sup 0/C and 550 to 700/sup 0/C saturated hydrocarbon fractions are not suited for analyses by combined GC/MS because their distillation ranges are higher than the upper limit of material that will elute from the gas chromatographic column. The /sup 1/H and /sup 13/C NMR spectral data for the 550 to 700/sup 0/C and >700/sup 0/C fractions indicate that normal and branched alkanes with an average carbon chainlength of C/sub 10/ are present but must be bonded to a larger molecular moiety based upon mass spectral evidence and boiling point considerations. Normal and branched alkanes were not detected in either 200 to 425/sup 0/C or 425 to 550/sup 0/C samples at concentrations of 0.01% by weight. NMR data for the 200 to 425/sup 0/C fraction give no indication of normal alkanes with C chainlengths >9. Branched alkanes possibly of the isoprenoid-like structure are present. The average molecular structural representation is an alkyl-substituted dicyclic alkane. Average molecular structural representation for the 425 to 550/sup 0/C fraction is also an alkyl-substituted dicyclic alkane. However, at least one of the alkyl substituents has a chainlength >10. Both normal and branched alkanes of C/sub 7-12/ were detected in the <200/sup 0/C subfraction. Alkanes of C/sub 12-31/ were in the >200/sup 0/C sample. /sup 1/H and /sup 13/C spectra for both subfractions indicate similar chemical composition. 12 refs., 6 figs., 8 tabs.

  16. 21 CFR 524.463 - Copper naphthenate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Copper naphthenate. 524.463 Section 524.463 Food... DRUGS, FEEDS, AND RELATED PRODUCTS OPHTHALMIC AND TOPICAL DOSAGE FORM NEW ANIMAL DRUGS § 524.463 Copper naphthenate. (a) Amount. The drug is a 37.5 percent solution of copper naphthenate. (b) Sponsors. See...

  17. 21 CFR 524.463 - Copper naphthenate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Copper naphthenate. 524.463 Section 524.463 Food... DRUGS, FEEDS, AND RELATED PRODUCTS OPHTHALMIC AND TOPICAL DOSAGE FORM NEW ANIMAL DRUGS § 524.463 Copper naphthenate. (a) Amount. The drug is a 37.5 percent solution of copper naphthenate. (b) Sponsors. See...

  18. 21 CFR 524.463 - Copper naphthenate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Copper naphthenate. 524.463 Section 524.463 Food... DRUGS, FEEDS, AND RELATED PRODUCTS OPHTHALMIC AND TOPICAL DOSAGE FORM NEW ANIMAL DRUGS § 524.463 Copper naphthenate. (a) Amount. The drug is a 37.5 percent solution of copper naphthenate. (b) Sponsors. See...

  19. 21 CFR 524.463 - Copper naphthenate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Copper naphthenate. 524.463 Section 524.463 Food... DRUGS, FEEDS, AND RELATED PRODUCTS OPHTHALMIC AND TOPICAL DOSAGE FORM NEW ANIMAL DRUGS § 524.463 Copper naphthenate. (a) Amount. The drug is a 37.5 percent solution of copper naphthenate. (b) Sponsors. See...

  20. 21 CFR 172.250 - Petroleum naphtha.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Petroleum naphtha. 172.250 Section 172.250 Food... Coatings, Films and Related Substances § 172.250 Petroleum naphtha. Petroleum naphtha may be safely used in..., essentially paraffinic and naphthenic in nature obtained from petroleum, (b) The additive is refined to...

  1. 21 CFR 172.250 - Petroleum naphtha.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Petroleum naphtha. 172.250 Section 172.250 Food... Coatings, Films and Related Substances § 172.250 Petroleum naphtha. Petroleum naphtha may be safely used in..., essentially paraffinic and naphthenic in nature obtained from petroleum, (b) The additive is refined to...

  2. 21 CFR 172.250 - Petroleum naphtha.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Petroleum naphtha. 172.250 Section 172.250 Food... § 172.250 Petroleum naphtha. Petroleum naphtha may be safely used in food in accordance with the... naphthenic in nature obtained from petroleum, (b) The additive is refined to meet the...

  3. 21 CFR 172.250 - Petroleum naphtha.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Petroleum naphtha. 172.250 Section 172.250 Food and..., Films and Related Substances § 172.250 Petroleum naphtha. Petroleum naphtha may be safely used in food..., essentially paraffinic and naphthenic in nature obtained from petroleum, (b) The additive is refined to...

  4. 21 CFR 172.250 - Petroleum naphtha.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Petroleum naphtha. 172.250 Section 172.250 Food... Coatings, Films and Related Substances § 172.250 Petroleum naphtha. Petroleum naphtha may be safely used in..., essentially paraffinic and naphthenic in nature obtained from petroleum, (b) The additive is refined to...

  5. Distribution of naphthenic acids in tissues of laboratory-exposed fish and in wild fishes from near the Athabasca oil sands in Alberta, Canada.

    PubMed

    Young, Rozlyn F; Michel, Lorelei Martínez; Fedorak, Phillip M

    2011-05-01

    Naphthenic acids, which have a variety of commercial applications, occur naturally in conventional crude oil and in highly biodegraded petroleum such as that found in the Athabasca oil sands in Alberta, Canada. Oil sands extraction is done using a caustic aqueous extraction process. The alkaline pH releases the naphthenic acids from the oil sands and dissolves them into water as their soluble naphthenate forms, which are anionic surfactants. These aqueous extracts contain concentrations of naphthenates that are acutely lethal to fishes and other aquatic organisms. Previous research has shown that naphthenic acids can be taken up by fish, but the distribution of these acids in various tissues of the fish has not been determined. In this study, rainbow trout (Oncorhynchus mykiss) were exposed to commercial (Merichem) naphthenic acids in the laboratory. After a 10-d exposure to approximately 3mg naphthenic acids/L, the fish were dissected and samples of gills, heart, liver, kidney, muscle, and eggs were extracted and analyzed for free (unconjugated) naphthenic acids by a gas chromatography-mass spectrometry method. Each of the tissues contained naphthenic acids and non-parametric statistical analyses showed that gills and livers contained higher concentrations than the muscles and that the livers had higher concentrations than the hearts. Four different species of fish (two fish of each species) were collected from the Athabasca River near two oil sands mining and extraction operations. No free naphthenic acids were detected in the muscle or liver of these fish.

  6. Secondary production of freshwater zooplankton communities exposed to a fungicide and to a petroleum distillate in outdoor pond mesocosms.

    PubMed

    Bayona, Yannick; Roucaute, Ana; Roucaute, Marc; Gorzerino, Caroline; Cailleaud, Kevin; Lagadic, Laurent; Bassères, Anne; Caquet, Thierry

    2014-04-01

    Ecological risk assessment of chemicals in mesocosms requires measurement of a large number of parameters at the community level. Studies on invertebrate communities usually focus on taxonomic approaches, which only provide insights into taxonomic structure changes induced by chemicals. In the present study, abundance, biomass (B), theoretical production (P), and instantaneous P/B ratio were used as endpoints to assess the effects of the commercial form of the dithiocarbamate fungicide thiram (35 µg/L and 170 µg/L nominal concentrations) and of the hydrocarbon water accommodated fraction (HWAF) of a petroleum distillate (0.01 mg/L, 0.4 mg/L, 2 mg/L, and 20 mg/L loadings) on the zooplankton community in freshwater pond mesocosms. Endpoints were measured during a 4-wk treatment period (1 pulse/wk) followed by a 5-mo posttreatment period to evaluate zooplankton population recovery. The chlorophyll a concentration in water was significantly increased after treatment with HWAF, whereas it was not affected by thiram treatment. Zooplankton abundance-based analysis showed effects on a limited number of taxa, whereas other endpoints (mainly the P/B ratio) revealed that more taxa were impacted, with recovery depending on the chemical and concentration. Exposure to HWAF mainly had a negative impact on cladocerans, which resulted in top-down effects (between cladocerans and phytoplankton). Thiram negatively affected rotifers and copepods, suggesting more direct toxic effects. The results show that the use of secondary production as an endpoint provides a more comprehensive assessment of potential direct and indirect effects of chemicals on a community, and they also support evidence of alteration in functional processes.

  7. Toxicity study of lead naphthenate

    PubMed Central

    Peteghem, Th. Van; Devos, H.

    1974-01-01

    van Peteghem, Th., and de Vos, H. (1974).British Journal of Industrial Medicine,31, 233-238. Toxicity study of lead naphthenate. Lead naphthenate is added to oils and greases in order to increase their resistance to high pressures. Experiments on animals and humans showed the possibility of a small amount of percutaneous absorption. An investigation was performed on technicians regularly dealing with these lubricants in order to explore to what extent they had absorbed the lead naphthenate. The degree of absorption was evaluated by measuring the lead content of the blood and the δ-aminolevulinic acid concentration in the urine. Individual results did not permit clearcut conclusions whether an increase in lead absorption had occured or not. Therefore the group of technicians was compared with a group without any occupational contact with lead-containing lubricants but otherwise comparable in occupational and general exposure to lead. To test the significance of the difference between the means of the samples a one-sided t test not assuming equal standard deviations for both populations was used. For any of two compared populations the t test was repeated after rejection of the larger values which were 2·5 standard deviations from the mean value in the exposed population. It appeared that the lead concentration in the blood and the δ-aminolevulinic acid concentration in the urine of people exposed to lead naphthenate-containing lubricants were significantly higher than those concentrations observed in non-exposed persons. PMID:4416678

  8. Petroleum.

    ERIC Educational Resources Information Center

    McManus, T. R.; And Others

    1989-01-01

    This review of petroleum covers: crude oil; fuels, gaseous and liquid; lubricants, oils, and greases; asphalts, bitumens, tars, and pitches; hydrocarbons; physical properties; metals in oil; nonmetallic elements and heterocompounds; and analytical methods and apparatus. (MVL)

  9. 21 CFR 524.463 - Copper naphthenate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... and ponies for thrush caused by organisms susceptible to copper naphthenate. (3) Limitations. Use on horses and ponies only. Avoid contact around eyes. Do not contaminate feed. Do not use in horses...

  10. Understanding Naphthenic Acid Corrosion in Refinery Settings

    NASA Astrophysics Data System (ADS)

    Patrick, Brian Neil

    Naphthenic acid corrosion has plagued refineries for nearly a century. However, the vast majority of naphthenic acid corrosion research to date is solely focused on remediation, and not understanding the fundamental mechanism of corrosion. To further the current state of understanding in order to mitigate corrosion, experiments were performed to address the corrosion mechanism of iron, as well as of the ferrous alloying elements. In addition, electrochemical methods were used to determine the presence of acids within nonpolar solvents, such as a crude. The structure of the acids in solution was studied with FT-IR and Raman spectroscopy to understand how the acids self-associate as a function of temperature, concentration and presence of a metal. The results have yielded that iron corrodes via an etch pitting mechanism. In addition, this work has determined that the mechanism of resistance of chromium and molybdenum are their passive films, and that these metals are susceptible to naphthenic acid attack if the passive films break down. The mechanism of resistance of these elements provides insight into the failure mode of 304 and the 400 series stainless steels in naphthenic acid service. A particular result of interest is that nickel catalytically decomposes naphthenic acids at high temperatures (e.g. 270°C) via a catalytic mechanism. Finally, a palladium hydride reference electrode was developed that functions in aprotic solvents, and an ionic liquid was synthesized that allowed for the electrochemical detection of naphthenic acids in toluene.

  11. Petroleum marketing monthly

    SciTech Connect

    1995-11-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data.

  12. Analysis of heavy oils: Method development and application to Cerro Negro heavy petroleum: Distillation and determination of routine chemical/physical properties: Topical report

    SciTech Connect

    Green, J.B.; Grizzle, P.L.; Thomson, J.S.; Shay, J.Y.; Diehl, B.H.; Hornung, K.W.; Sanchez, V.

    1988-10-01

    Part A discusses distillation of Cerro Negro heavy oil and general chemical/physical properties determined on each distillate and the residue. Based on GC-simulated distillation results, compounds boiling up to 700/degree/C atmospheric equivalent boiling point (AEBP) were distilled; nevertheless, total distillate yield represented only 55 weight percent of the whole crude. As revealed by comparative data on other crudes contained in the report, overall, chemical/physical properties of Cerro Negro crudes resemble those of tar sand bitumens and other geochemically related organic matter. Part B examines methodology for determining average molecular weights of Cerro Negro fractions and like materials. The theory and practice of vapor pressure osmometry (VPO) as applied to fossil fuels was critically evaluated through its application to Cerro Negro fractions and pure compounds, and by comparison of VPO results to those from other methods. Both solute-solute and solute-solvent intermolecular associations cause VPO data to be erroneously high, especially in cases where either the solutes and/or solvents are relatively polar. 79 refs., 24 figs., 6 tabs.

  13. Improved Processes to Remove Naphthenic Acids

    SciTech Connect

    Aihua Zhang; Qisheng Ma; Kangshi Wang; Yongchun Tang; William A. Goddard

    2005-12-09

    In the past three years, we followed the work plan as we suggested in the proposal and made every efforts to fulfill the project objectives. Based on our large amount of creative and productive work, including both of experimental and theoretic aspects, we received important technical breakthrough on naphthenic acid removal process and obtained deep insight on catalytic decarboxylation chemistry. In detail, we established an integrated methodology to serve for all of the experimental and theoretical work. Our experimental investigation results in discovery of four type effective catalysts to the reaction of decarboxylation of model carboxylic acid compounds. The adsorption experiment revealed the effectiveness of several solid materials to naphthenic acid adsorption and acidity reduction of crude oil, which can be either natural minerals or synthesized materials. The test with crude oil also received promising results, which can be potentially developed into a practical process for oil industry. The theoretical work predicted several possible catalytic decarboxylation mechanisms that would govern the decarboxylation pathways depending on the type of catalysts being used. The calculation for reaction activation energy was in good agreement with our experimental measurements.

  14. Measurement of total acid number (TAN) and TAN boiling point distribution in petroleum products by electrospray ionization mass spectrometry.

    PubMed

    Qian, Kuangnan; Edwards, Kathleen E; Dechert, Gary J; Jaffe, Stephen B; Green, Larry A; Olmstead, William N

    2008-02-01

    We report a new method for rapid measurement of total acid number (TAN) and TAN boiling point (BP) distribution for petroleum crude and products. The technology is based on negative ion electrospray ionization mass spectrometry (ESI-MS) for selective ionization of petroleum acid and quantification of acid structures and molecular weight distributions. A chip-based nanoelectrospray system enables microscale (<200 mg) and higher throughput (20 samples/h) measurement. Naphthenic acid structures were assigned based on nominal masses of a set of predefined acid structures. Stearic acid is used as an internal standard to calibrate ESI-MS response factors for quantification purposes. With the use of structure-property correlations, boiling point distributions of TAN values can be calculated from the composition. The rapid measurement of TAN BP distributions by ESI is demonstrated for a series of high-TAN crudes and distillation cuts. TAN values determined by the technique agree well with those by the titration method. The distributed properties compare favorably with those measured by distillation and measurement of TAN of corresponding cuts.

  15. Naphthene upgrading with pillared synthetic clay catalysts

    SciTech Connect

    Sharma, R.K.; Olson, E.S.

    1995-12-31

    Catalytic hydrotreatment of methylcyclohexane was investigated to model upgrading of coal-derived naphthenes. Nickel-substituted synthetic mica montmorillonite (NiSMM), alumina-pillared NiSMM, and zirconia-pillared NiSMM were prepared and tested for hydrocracking and hydroisomerization of mediylcyclohexane. Infrared and thermal desorption studies of the pyridine-adsorbed catalysts indicated the presence of Lewis as well as Bronsted acid sites. Total acidity and surface area increased with pillaring of NiSMM with polyoxy aluminum and polyoxy zirconium cations. Most of the products were branched alkanes (isoparaffins). These compositions are highly desirable for environmentally acceptable transportation fuels. Furthermore, dehydrogenation was not a major pathway, as indicated by the minimal formation of aromatic hydrocarbons, coke, or other oligomeric materials. This paper describes the effect of various operating conditions, which included reaction temperature, contact time, hydrogen pressure, and catalyst on the product distribution.

  16. Chemical/physical separations of alternate petroleum distillates. I. Average instrumental response factors for well defined fossil fuel fractions. [Monoaromatics, diaromatics, triaromatics

    SciTech Connect

    Thomson, J.S.; Reynolds, J.W.; Treese, C.A.; Tang, S.Y.; Hirsch, D.E.

    1985-03-11

    Narrow heart-cut fractions of Cerro Negro and Wilmington crude oil acid- and base-free distillates were prepared on a preparative dinitroanilinopropylsilica (DNAP) column by a gradient solvent program. The fractions were characterized by synchronized scanning fluorimetry and gas chromatography/mass spectrometry. Average instrument response factors for ultraviolet spectroscopy and gas chromatography/flame ionization detection were determined on the heart-cut fractions. 3 figures, 4 tables.

  17. Diaromatic sulphur-containing 'naphthenic' acids in process waters.

    PubMed

    West, Charles E; Scarlett, Alan G; Tonkin, Andrew; O'Carroll-Fitzpatrick, Devon; Pureveen, Jos; Tegelaar, Erik; Gieleciak, Rafal; Hager, Darcy; Petersen, Karina; Tollefsen, Knut-Erik; Rowland, Steven J

    2014-03-15

    Polar organic compounds found in industrial process waters, particularly those originating from biodegraded petroleum residues, include 'naphthenic acids' (NA). Some NA have been shown to have acute toxicity to fish and also to produce sub-lethal effects. Whilst some of these toxic effects are produced by identifiable carboxylic acids, acids such as sulphur-containing acids, which have been detected, but not yet identified, may produce others. Therefore, in the present study, the sulphur-containing acids in oil sands process water were studied. A fraction (ca 12% by weight of the total NA containing ca 1.5% weight sulphur) was obtained by elution of methylated NA through an argentation solid phase extraction column with diethyl ether. This was examined by multidimensional comprehensive gas chromatography-mass spectrometry (GCxGC-MS) in both nominal and high resolution mass accuracy modes and by GCxGC-sulphur chemiluminescence detection (GCxGC-SCD). Interpretation of the mass spectra and retention behaviour of methyl esters of several synthesised sulphur acids and the unknowns allowed delimitation of the structures, but not complete identification. Diaromatic sulphur-containing alkanoic acids were suggested. Computer modelling of the toxicities of some of the possible acids suggested they would have similar toxicities to one another and to dehydroabietic acid. However, the sulphur-rich fraction was not toxic or estrogenic to trout hepatocytes, suggesting the concentrations of sulphur acids in this sample were too low to produce any such effects in vitro. Further samples should probably be examined for these compounds.

  18. Petroleum marketing annual 1994

    SciTech Connect

    1995-08-24

    The Petroleum Marketing Annual (PMA) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysis, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the fob and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Annual. For this production, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication date.

  19. Petroleum marketing monthly, May 1994

    SciTech Connect

    Not Available

    1994-05-26

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  20. The Relationship Between the Color Characteristics of the RGB Colorimetric System and the Physicochemical Properties of Petroleums and high Boiling Hydrocarbon Distillates

    NASA Astrophysics Data System (ADS)

    Dolomatov, M. Yu.; Yarmuhametova, G. U.

    2016-09-01

    An interrelation was established between physicochemical properties of oils and high boiling hydrocarbon distillates and their solutions' color characteristics defi ned in the RGB colorimetric system using a standard radiation source CIE D65. It was shown that by using color characteristics of solutions of the specifi ed objects, it was possible to determine their relative density, molecular mass, activation energy of viscous fl ow, and the coking value. Research results were confi rmed by statistical data processing using the methods of multivariate regression and correlation analysis.

  1. Model development for naphthenic acids ozonation process.

    PubMed

    Al Jibouri, Ali Kamel H; Wu, Jiangning

    2015-02-01

    Naphthenic acids (NAs) are toxic constituents of oil sands process-affected water (OSPW) which is generated during the extraction of bitumen from oil sands. NAs consist mainly of carboxylic acids which are generally biorefractory. For the treatment of OSPW, ozonation is a very beneficial method. It can significantly reduce the concentration of NAs and it can also convert NAs from biorefractory to biodegradable. In this study, a factorial design (2(4)) was used for the ozonation of OSPW to study the influences of the operating parameters (ozone concentration, oxygen/ozone flow rate, pH, and mixing) on the removal of a model NAs in a semi-batch reactor. It was found that ozone concentration had the most significant effect on the NAs concentration compared to other parameters. An empirical model was developed to correlate the concentration of NAs with ozone concentration, oxygen/ozone flow rate, and pH. In addition, a theoretical analysis was conducted to gain the insight into the relationship between the removal of NAs and the operating parameters.

  2. Anaerobic biodegradation of surrogate naphthenic acids.

    PubMed

    Clothier, Lindsay N; Gieg, Lisa M

    2016-03-01

    Surface bitumen extraction from the Alberta's oil sands region generates large settling basins known as tailings ponds. The oil sands process-affected water (OSPW) stored in these ponds contain solid and residual bitumen-associated compounds including naphthenic acids (NAs) that can potentially be biodedgraded by indigenous tailings microorganisms. While the biodegradation of some NAs is known to occur under aerobic conditions, little is understood about anaerobic NA biodegradation even though tailings ponds are mainly anoxic. Here, we investigated the potential for anaerobic NA biodegradation by indigenous tailings microorganisms. Enrichment cultures were established from anoxic tailings that were amended with 5 single-ringed surrogate NAs or acid-extractable organics (AEO) from OSPW and incubated under nitrate-, sulfate-, iron-reducing, and methanogenic conditions. Surrogate NA depletion was observed under all anaerobic conditions tested to varying extents, correlating to losses in the respective electron acceptor (sulfate or nitrate) or the production of predicted products (Fe(II) or methane). Tailings-containing cultures incubated under the different electron-accepting conditions resulted in the enrichment and putative identification of microbial community members that may function in metabolizing surrogate NAs under the various anoxic conditions. In addition, more complex NAs (in the form of AEO) was observed to drive sulfate and iron reduction relative to controls. Overall, this study has shown that simple surrogate NAs can be biodegraded under a variety of anoxic conditions, a key first step in understanding the potential anaerobic metabolism of NAs in oil sands tailings ponds and other industrial wastewaters.

  3. Naphthene upgrading with pillared synthetic clay catalysts

    SciTech Connect

    Sharma, R.K.; Olson, E.S.

    1995-12-31

    Catalytic hydrotreatment of methylcyclohexane was investigated to model upgrading of coal-derived naphthenes. Nickel-substituted synthetic mica montmorillonite (NiSMM), alumina-pillared NiSMM and Zirconia-pillared NiSMM were prepared and tested for hydrocracking and hydroisomerization of methylcyclohexane. Infrared and thermal desorption studies of the pyridine-adsorbed catalysts indicated the presence of Lewis and Bronsted acid sites. Total acidity and surface area increased with pillaring of NiSMM with polyoxy aluminum and polyoxy zirconium cations. Methylcyclohexane was reacted with these catalysts under a variety of conditions. Pillared clays gave higher gas yields and higher hydrocracking but lower hydroisomerization activity than nonpillared clay. The majority of the products were branched alkanes (isoparaffinic). These catalysts effectively use hydrogen as indicated by the minimal formation of aromatic hydrocarbons, coke, or other oligomeric materials. The effect of various operating conditions, i.e., reaction temperature, contact time, H{sub 2} pressure, and catalyst, on the product distribution will be described.

  4. Enhanced naphthenic refrigeration oils for household refrigerator systems

    SciTech Connect

    Reyes-Gavilan, J.L.; Flak, G.T.; Tritcak, T.R.; Barbour, C.B.

    1997-12-31

    Due to industry concerns about the successful employment of hydrofluorocarbon-immiscible hydrocarbon oils in refrigeration systems, enhanced naphthenic refrigeration oils have been developed. These products have been designed to be more dispersible with hydrofluorocarbon (HFC) refrigerants, such as R-134a, in order to facilitate lubricant return to the compressor and to ensure proper energy efficiency of the system. Bench tests and system performance evaluations indicate the feasibility of these oils for use in household refrigeration applications. Results of these evaluations are compared with those obtained with polyol esters and typical naphthenic mineral oils employed in chlorofluorocarbon (CFC) and hydrochlorofluorocarbon (HCFC) refrigeration applications.

  5. Petroleum marketing monthly, December 1995

    SciTech Connect

    1995-12-05

    This publication provides information and statistical data on a variety of crude oils and refined petroleum products. It presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include domestic first purchase price, f.o.b. and landed cost of imported crude, and refiners` acquisition cost of crude. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane.

  6. Petroleum marketing monthly, June 1994

    SciTech Connect

    Not Available

    1994-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in five sections: Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. The feature article is entitled ``The Second Oxygenated Gasoline Season.`` 7 figs., 50 tabs.

  7. Petroleum marketing monthly, July 1994

    SciTech Connect

    Not Available

    1994-07-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  8. Analysis of naphthenic acid mixtures as pentafluorobenzyl derivatives by gas chromatography-electron impact mass spectrometry.

    PubMed

    Gutierrez-Villagomez, Juan Manuel; Vázquez-Martínez, Juan; Ramírez-Chávez, Enrique; Molina-Torres, Jorge; Trudeau, Vance L

    2017-01-01

    In this study, we report for the first time the efficiency of pentafluorobenzyl bromide (PFBBr) for naphthenic acid (NA) mixtures derivatization, and the comparison in the optimal conditions to the most common NAs derivatization reagents, BF3/MeOH and N-(t-butyldimethylsilyl)-N-methyltrifluoroacetamide (MTBSTFA). Naphthenic acids are carboxylic acid mixtures of petrochemical origin. These compounds are important for the oil industry because of their corrosive properties, which can damage oil distillation infrastructure. Moreover, NAs are commercially used in a wide range of products such as paint and ink driers, wood and fabric preservatives, fuel additives, emulsifiers, and surfactants. Naphthenic acids have also been found in sediments after major oils spills in the United States and South Korea. Furthermore, the toxicity of the oil sands process-affected water (OSPW), product of the oil sands extraction activities in Canada's oil sands, has largely been attributed to NAs. One of the main challenges for the chromatographic analysis of these mixtures is the resolution of the components. The derivatization optimization was achieved using surface response analysis with molar ratio and time as factors for derivatization signal yield. After gas chromatography-electron impact mass spectrometry (GC/EIMS) analysis of a mixture of NA standards, it was found that the signal produced by PFB-derivatives was 2.3 and 1.4 times higher than the signal produced by methylated and MTBS-derivatives, respectively. The pentafluorobenzyl derivatives have a characteristic fragment ion at 181m/z that is diagnostic for the differentiation of carboxylic and non-carboxylic acid components within mixtures. In the analysis of a Sigma and a Merichem derivatized oil extract NA mixtures, it was found that some peaks lack the characteristic fragment ion; therefore they are not carboxylic acids. Open column chromatography was used to obtain a hexane and a methanol fraction of the Sigma and

  9. Characterization of Magnetite Scale Formed in Naphthenic Acid Corrosion

    NASA Astrophysics Data System (ADS)

    Jin, Peng; Robbins, Winston; Bota, Gheorghe; Nesic, Srdjan

    2017-02-01

    Naphthenic acid corrosion (NAC) is one of the major concerns for corrosion engineers in refineries. Traditionally, the iron sulfide (FeS) scale, formed when sulfur compounds in crudes corrode the metal, is expected to be protective and limit the NAC. Nevertheless, no relationship has been found between protectiveness and the characteristics of FeS scale. In this study, lab scale tests with model sulfur compounds and naphthenic acids replicated corrosive processes of refineries with real crude fractions behavior. The morphology and chemical composition of scales were analyzed with scanning electron microscopy and transmission electron microscopy. These high-resolution microscopy techniques revealed the presence of an iron oxide (Fe3O4 or magnetite) scale and discrete particulates on metal surfaces under FeS scales, especially on a low chrome steel. The presence of the iron oxide was correlated with the naphthenic acid activity during the experiments. It is postulated that the formation of the magnetite scale resulted from the decomposition of iron naphthenates at high temperatures. It is further postulated that a nano-particulate form of magnetite may be providing corrosion resistance.

  10. Characterization of Magnetite Scale Formed in Naphthenic Acid Corrosion

    NASA Astrophysics Data System (ADS)

    Jin, Peng; Robbins, Winston; Bota, Gheorghe; Nesic, Srdjan

    2016-10-01

    Naphthenic acid corrosion (NAC) is one of the major concerns for corrosion engineers in refineries. Traditionally, the iron sulfide (FeS) scale, formed when sulfur compounds in crudes corrode the metal, is expected to be protective and limit the NAC. Nevertheless, no relationship has been found between protectiveness and the characteristics of FeS scale. In this study, lab scale tests with model sulfur compounds and naphthenic acids replicated corrosive processes of refineries with real crude fractions behavior. The morphology and chemical composition of scales were analyzed with scanning electron microscopy and transmission electron microscopy. These high-resolution microscopy techniques revealed the presence of an iron oxide (Fe3O4 or magnetite) scale and discrete particulates on metal surfaces under FeS scales, especially on a low chrome steel. The presence of the iron oxide was correlated with the naphthenic acid activity during the experiments. It is postulated that the formation of the magnetite scale resulted from the decomposition of iron naphthenates at high temperatures. It is further postulated that a nano-particulate form of magnetite may be providing corrosion resistance.

  11. Combination of thermal cracking with vacuum distillation of cracked tar

    SciTech Connect

    Telyashev, G.G.; Gimaev, R.N.; Makhov, A.F.; Usmanov, R.M.; Baimbetov, A.M.; Vafin, I.A.

    1987-11-01

    A method of obtaining greater amounts of distillate feedstocks from the heavy gasoil recovered by vacuum distillation of the products of thermal cracking of petroleum resids was examined. At the Novo-Ufa Petroleum Refinery, a two-furnace thermal cracking unit was reconstructed, adding a vacuum section for distillation of the cracked tar. A simplified flow plan of this unit is shown. Vacuum resid from atmospheric-vacuum tubestill units is heated in double-pipe heat exchangers, using heat from the gasoil and cracked tar. The new method makes it possible to curtail production of boiler fuel, expand the resources of feed, and improve the quality of petroleum coke.

  12. Petroleum marketing annual 1993

    SciTech Connect

    Not Available

    1995-01-01

    The Petroleum Marketing Annual (PMA) contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. For this publication, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication dates.

  13. Process for the preparation of light hydrocarbon distillates by hydrocracking and catalytic cracking

    SciTech Connect

    DeVries, A.F.; Stork, W.H.J.

    1989-08-22

    This patent describes a process for the preparation of a gasoline range petroleum distillate from a vacuum heavy hydrocarbon oil distillate. It comprises: passing at least a portion of the vacuum heavy hydrocarbon oil distillate to a hydrocracking zone to hydrocrack the distillate into a product stream comprising a hydrocracked distillate residue having an initial boiling point of at least 300{sup 0}C; passing the hydrocracked distillate to a distillation separation zone to separate and recover the residue; passing the residue to a catalytic cracking zone to catalytically crack the residue; passing at least a portion of the vacuum heavy oil distillate prior to hydrocracking to the catalytic cracking to catalytically crack the vacuum heaving oil distillate; withdrawing the gasoline range petroleum distillate from the catalytic cracking zone.

  14. Short-Term Energy Outlook Model Documentation: Petroleum Products Supply Module

    EIA Publications

    2013-01-01

    The Petroleum Products Supply Module of the Short-Term Energy Outlook (STEO) model provides forecasts of petroleum refinery inputs (crude oil, unfinished oils, pentanes plus, liquefied petroleum gas, motor gasoline blending components, and aviation gasoline blending components) and refinery outputs (motor gasoline, jet fuel, distillate fuel, residual fuel, liquefied petroleum gas, and other petroleum products).

  15. Petroleum Marketing Annual, 1989

    SciTech Connect

    Not Available

    1990-12-18

    This report contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for us by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 13 figs., 51 tabs.

  16. Petroleum marketing monthly, September 1994

    SciTech Connect

    Not Available

    1994-09-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum product sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  17. Petroleum marketing monthly, August 1994

    SciTech Connect

    Not Available

    1994-08-15

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product Sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  18. Determination of dissolved naphthenic acids in natural waters by using negative-ion electrospray mass spectrometry.

    PubMed

    Headley, John V; Peru, Kerry M; McMartin, Dena W; Winkler, Marcus

    2002-01-01

    Naphthenic acids (NAs) have been implicated as some of the most toxic substances in oil sands leachates and identified as priority substances impacting on aquatic environments. As a group of compounds, NAs are not well characterized and comprise a large group of saturated aliphatic and alicyclic carboxylic acids found in hydrocarbon deposits (petroleum, oil sands bitumen, and crude oils). Described is an analytical method using negative-ion electrospray ionization mass spectrometry (ES/MS) of extracts. Preconcentration was achieved by using a solid-phase extraction procedure utilizing a crosslinked polystyrene-based polymer with acetonitrile elution. Recovery of the Fluka Chemicals NA mixture was highly pH-dependent, with 100% recovery at pH 3.0, but only 66 and 51% recoveries at pHs 7 and 9, respectively. The dissolved phase of the NA was very dependent on sample pH. It is thus critical to measure the pH and determine the appropriate mass profiles to identify NAs in natural waters. The ES/MS analytical procedure proved to be a fast and sensitive method for the recovery and detection of NAs in natural waters, with a detection limit of 0.01 mg/L.

  19. Is biodegradation of bitumen a source of recalcitrant naphthenic acid mixtures in oil sands tailing pond waters?

    PubMed

    Quagraine, E K; Headley, J V; Peterson, H G

    2005-01-01

    Carboxylic acids are transient metabolites during the mineralization of petroleum hydrocarbons. Crude oils, however, vary in their proportion of the hydrocarbon components. Depending on structure, some carboxylic acid metabolites resist further biodegradation and persist in aquatic systems. During the extraction of oil sands bitumen, recalcitrant carboxylic acid mixtures, collectively referred to as naphthenic acids (NAs), are released into the wastewaters. These waters also contain unrecovered bitumen from the oil sands. The unextracted bitumen is often overlooked as a possible source of the petroleum acids. The present article discusses the literature data on the biotransformation of hydrocarbons in bitumen from oil sands to the corresponding petroleum carboxylic acids. Some insight is given on the mechanism of the biodegradation process. The susceptibility to biodegradation is affected by differences in alicyclic carboxylic acids such as carbon chain length, chain branching, and the oddness or evenness of carbon chain containing the carboxylic group, positions where alkyl groups are substituted on the cyclic ring, geometrical isomerism, and number of cyclic rings.

  20. Petroleum marketing monthly, August 1990

    SciTech Connect

    Not Available

    1990-11-07

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 49 tabs.

  1. Petroleum marketing monthly, March 1994

    SciTech Connect

    Not Available

    1994-03-22

    The Petroleum Marketing Monthly is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, education institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiner`s acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  2. Petroleum marketing monthly, November 1993

    SciTech Connect

    Not Available

    1993-11-09

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed costs of imported crude oil, and the refiner`s acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  3. Petroleum marketing monthly, February 1994

    SciTech Connect

    Not Available

    1994-02-25

    The Petroleum Marketing Monthly is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiner`s acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  4. Distillation Column Modeling Tools

    SciTech Connect

    2001-09-01

    Advanced Computational and Experimental Techniques will Optimize Distillation Column Operation. Distillation is a low thermal efficiency unit operation that currently consumes 4.8 quadrillion BTUs of energy...

  5. Increased blood and urine copper after residential exposure to copper naphthenate

    SciTech Connect

    Bluhm, R.E.; Welch, L.; Branch, R.A. )

    1992-01-01

    Despite widespread industrial use of copper naphthenate, there are no reports of the relationship of copper naphthenate and copper absorption in humans or animals. We report a family of three individuals who lived in a home where copper naphthenate was sprayed on the inner foundation. Subsequently, these individuals developed non-specific complaints. In two of these individuals, serum copper levels were elevated when first measured months after copper naphthenate was sprayed in the home. A gradual decline over several years in urine and serum copper levels was observed in the individual who maintained follow-up. It is not known if symptoms reflected exposure to naphthenate, the solvent vehicle, volatilized copper, or the stress of exposure to a malodorous compound perceived as toxic. Exposure to copper naphthenate may be another cause of an elevated serum and urine copper level but the interpretation of these levels as normal' or toxic' requires additional study for clarification. This report suggests the need for further study of the absorption and relative toxicity of copper naphthenate.

  6. Allergenicity and cross-reactivity of naphthenic acid and its metallic salts in experimental animals.

    PubMed

    Yamano, Tetsuo; Shimizu, Mitsuru; Noda, Tsutomu

    2006-01-01

    The allergenicity and the cross-reactivity of naphthenic acid (NA) and its metallic salts were evaluated in experimental animals. In the guinea pig maximization test, sensitizing skin reactions were observed with cobalt naphthenate (CoN), zinc naphthenate (ZnN) and NA, but not with copper naphthenate, with CoN being the most potent sensitizer. Animals sensitized with 1 naphthenic compound cross-reacted to the other 3 as well. Furthermore, animals in the CoN-sensitized group reacted to the relevant metallic salt cobalt chloride (CoCl2). A dose-response study using the CoN-sensitized group showed that the concentration of CoCl2 required to elicit a skin reaction of similar extent in comparison with CoN was more than 10 times higher, when skin-reaction scores were compared on the basis of cobalt content. In the local lymph node assay, significant increases in stimulation index values without skin irritation were observed with CoN and ZnN, where the former was more potent than the latter. Although CoN is a reported skin sensitizer, this study showed that skin allergenicity of naphthenic compounds is not restricted solely to CoN. In addition, the results suggest the main antigenic determinant of naphthenic compounds to be the structure of NA, even though metal moieties modulate their allergenicity.

  7. Petroleum marketing monthly with data for April 1995

    SciTech Connect

    1995-07-05

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data on the Petroleum Marketing Monthly. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption.

  8. Petroleum marketing monthly, June 1995 with data for March 1995

    SciTech Connect

    1995-06-16

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary Statistics Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption.

  9. Catalytic distillation structure

    DOEpatents

    Smith, Jr., Lawrence A.

    1984-01-01

    Catalytic distillation structure for use in reaction distillation columns, a providing reaction sites and distillation structure and consisting of a catalyst component and a resilient component intimately associated therewith. The resilient component has at least about 70 volume % open space and being present with the catalyst component in an amount such that the catalytic distillation structure consist of at least 10 volume % open space.

  10. Role of naphthenic acids in stabilizing water-in-diluted model oil emulsions.

    PubMed

    Gao, Song; Moran, Kevin; Xu, Zhenghe; Masliyah, Jacob

    2010-06-17

    The need for alkaline conditions in oil sands processing is, in part, to produce natural surfactants from bitumen. Previous studies have shown that the produced surfactants are primarily carboxylic salts of naphthenic acids with the possibility of sulfonic salts as well. The role of these natural surfactants, particularly those in the naphthenate class, is to provide a physicochemical basis for several subprocesses in bitumen extraction. In this study, it was found that the content of indigenous naphthenic acids in bitumen can destabilize, to some extent, the water-in-oil emulsion by lowering the interfacial tension, reducing the rigidity and promoting the coalescence of water droplets.

  11. Naphthenic acids degradation and toxicity mitigation in tailings wastewater systems and aquatic environments: a review.

    PubMed

    Kannel, Prakash R; Gan, Thian Y

    2012-01-01

    Naphthenic acids, NAs (classical formula C(n)H(2n+z)O(2), where n is the carbon numbers, z represents zero or negative even integers), found in oil sands process waters (OSPWs), are toxic to aquatic environments depending upon several factors such as pH, salinity, molecular size and chemical structure of NAs. Among various available methods, biodegradation seems to be generally the most cost-effective method for decreasing concentrations of NAs (n ≤ 21) and reducing their associated toxicity in OSPW, however the mechanism by which the biodegradation of NAs occurs are poorly understood. Ozonation is superior over biodegradation in decreasing higher molecular weight alkyl branched NAs (preferentially, n ≥ 22, -6 ≥ z ≥ -12) as well as enabling accelerated biodegradation and reducing toxicity. Photolysis (UV at 254 nm) is effective in cleaving higher molecular weight NAs into smaller fragments that will be easier for microorganisms to degrade, whereas photocatalysis can metabolize selective NAs (0 ≥ z ≥ -6) efficiently and minimize their associated toxicity. Phytoremediation is applicable for metabolizing specific NAs (O(2), O(3), O(4), and O(5) species) and minimizing their associated toxicities. Petroleum coke (PC) adsorption is effective in reducing the more structurally complex NAs (preferentially 12 ≥ n ≥ 18 and z = -10, -12) and their toxicity in OSPWs, depending upon the PC content, pH and temperature. Several factors have influence on the degradation of NAs in OSPWs and aquatic environments, which include molecular mass and chemical structure of NAs, sediment structure, temperature, pH, dissolved oxygen, nutrients, and bacteria types.

  12. Comparison of GC-MS and FTIR methods for quantifying naphthenic acids in water samples.

    PubMed

    Scott, Angela C; Young, Rozlyn F; Fedorak, Phillip M

    2008-11-01

    The extraction of bitumen from the oil sands in Canada releases toxic naphthenic acids into the process-affected waters. The development of an ideal analytical method for quantifying naphthenic acids (general formula C(n)H(2n+Z)O(2)) has been impeded by the complexity of these mixtures and the challenges of differentiating naphthenic acids from other naturally-occurring organic acids. The oil sands industry standard FTIR method was compared with a newly-developed GC-MS method. Naphthenic acids concentrations were measured in extracts of surface and ground waters from locations within the vicinity of and away from the oil sands deposits and in extracts of process-affected waters. In all but one case, FTIR measurements of naphthenic acids concentrations were greater than those determined by GC-MS. The detection limit of the GC-MS method was 0.01 mg L(-1) compared to 1 mg L(-1) for the FTIR method. The results indicated that the GC-MS method is more selective for naphthenic acids, and that the FTIR method overestimates their concentrations.

  13. Catalytic distillation structure

    DOEpatents

    Smith, L.A. Jr.

    1984-04-17

    Catalytic distillation structure is described for use in reaction distillation columns, and provides reaction sites and distillation structure consisting of a catalyst component and a resilient component intimately associated therewith. The resilient component has at least about 70 volume % open space and is present with the catalyst component in an amount such that the catalytic distillation structure consists of at least 10 volume % open space. 10 figs.

  14. A laboratory evaluation of the sorption of oil sands naphthenic acids on organic rich soils.

    PubMed

    Janfada, Arash; Headley, John V; Peru, Kerry M; Barbour, S L

    2006-01-01

    The adsorption characteristics of oil sands tailings pond water (OSTPW)-derived naphthenic acids on soils was determined using a batch partitioning method. The adsorption isotherms were found to be linear in all cases. All tests were conducted at 4 degrees C, and at a pH of 8.0 +/- 0.4, which reflects the pH of a tailings settling facility near Fort McMurray, AB. The adsorption characteristics of the naphthenic acids in a synthetic groundwater (SGW) solution was compared to that of the mixture in Milli-Q water. In the presence of SGW, the adsorption coefficient (K(d)) of the mixture of naphthenic acids on soil 1 with a higher organic carbon fraction (f(oc)) was an order of magnitude higher than that observed with the same soil and the Milli-Q water mixture, increasing from 1.9 +/- 0.2 (mL/g) to 17.8 +/- 1.5 (mL/g). The adsorption coefficient of the mixture of naphthenic acids on soil 2, with a lower f(oc), was also observably higher in the SGW mixture, increasing from 1.3 +/- 0.15 (mL/g) to 3.7 +/- 0.2 (mL/g). The relative fractional abundance of the individual naphthenic acids was plotted in order to determine the presence of preferential sorption between individual species within the mixture. It was found that for all Z families (where Z is a measure of the number of rings), naphthenic acids within the carbon number range of 13 to 17 showed preferential sorption. The mixture in SGW showed more pronounced sorption relative to naphthenic acid mixture in Milli-Q water. The results indicate that mixtures of naphthenic acids sorb strongly to soils and that adsorption would be an important attenuating mechanism in groundwater transport. Furthermore, preferential sorption of the individual naphthenic acids is important from a toxicity stand point since different naphthenic acid species have varying degrees of toxicity.

  15. Petroleum marketing monthly, June 1993

    SciTech Connect

    Not Available

    1993-06-10

    This publication is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  16. Petroleum marketing monthly, June 1999, with data for March 1999

    SciTech Connect

    1999-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Initial Estimates; Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. 7 figs., 50 tabs.

  17. Petroleum marketing monthly, May 1999, with data for February 1999

    SciTech Connect

    1999-05-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Initial Estimates; Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. 7 figs., 50 tabs.

  18. Petroleum marketing monthly, November 1998, with data for August 1998

    SciTech Connect

    1998-11-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary statistics; Crude oil prices; Prices of petroleum products; Volumes of petroleum products; and Prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  19. Petroleum marketing monthly, June 1998, with data from March 1998

    SciTech Connect

    1998-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  20. Petroleum marketing monthly, December 1998 with data for September 1998

    SciTech Connect

    1998-12-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  1. Petroleum marketing monthly, July 1999, with data for April 1999

    SciTech Connect

    1999-07-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: initial estimates; summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 70 tabs.

  2. Petroleum marketing monthly: August 1998, with data for May 1998

    SciTech Connect

    1998-08-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. 7 figs., 50 tabs.

  3. Petroleum marketing monthly, July 1998 with data for April 1998

    SciTech Connect

    1998-07-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  4. Biodegradation of naphthenic acid surrogates by axenic cultures.

    PubMed

    Yue, Siqing; Ramsay, Bruce A; Ramsay, Juliana A

    2015-07-01

    This is the first study to report that bacteria from the genera Ochrobactrum, Brevundimonas and Bacillus can be isolated by growth on naphthenic acids (NAs) extracted from oil sands process water (OSPW). These pure cultures were screened for their ability to use a range of aliphatic, cyclic and aromatic NA surrogates in 96-well microtiter plates using water-soluble tetrazolium redox dyes (Biolog Redox Dye H) as the indicator of metabolic activity. Of the three cultures, Ochrobactrum showed most metabolic activity on the widest range of NA surrogates. Brevundomonas and especially Ochrobactrum had higher metabolic activity on polycyclic aromatic compounds than other classes of NA surrogates. Bacillus also oxidized a wide range of NA surrogates but not as well as Ochrobactrum. Using this method to characterize NA utilisation, one can identify which NAs or NA classes in OSPW are more readily degraded. Since aromatic NAs have been shown to have an estrogenic effect and polycyclic monoaromatic compounds have been suggested to pose the greatest environmental threat among the NAs, these bacterial genera may play an important role in detoxification of OSPW. Furthermore, this study demonstrates that bacteria belonging to the genera Ochrobactrum and Bacillus can also degrade surrogates of tricyclic NAs.

  5. Multipartite nonlocality distillation

    SciTech Connect

    Hsu, Li-Yi; Wu, Keng-Shuo

    2010-11-15

    The stronger nonlocality than that allowed in quantum theory can provide an advantage in information processing and computation. Since quantum entanglement is distillable, can nonlocality be distilled in the nonsignalling condition? The answer is positive in the bipartite case. In this article the distillability of the multipartite nonlocality is investigated. We propose a distillation protocol solely exploiting xor operations on output bits. The probability-distribution vectors and matrix are introduced to tackle the correlators. It is shown that only the correlators with extreme values can survive the distillation process. As the main result, the amplified nonlocality cannot maximally violate any Bell-type inequality. Accordingly, a distillability criterion in the postquantum region is proposed.

  6. Petroleum marketing monthly, November 1991. [Contains glossary

    SciTech Connect

    Not Available

    1991-11-07

    The Petroleum Marketing Monthly is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 53 tabs.

  7. Petroleum Marketing Monthly, January 1991. [Contains Glossary

    SciTech Connect

    Not Available

    1991-01-09

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 55 tabs.

  8. Odor detection thresholds of naphthenic acids from commercial sources and oil sands process-affected water.

    PubMed

    Edge, Kristyn; Barona, Brenda; Young, Rozlyn F; Fedorak, Phillip M; Wismer, Wendy V

    2010-11-01

    Naphthenic acids (NAs) occur naturally in various petroleums and in oil sands tailings waters and have been implicated as potential fish tainting compounds. In this study, trained sensory panels and the general population from a university were used to determine the odor detection thresholds of two commercial NAs preparations (Acros and Merichem) and of NAs extracted from an oil sands experimental reclamation pond (Pond 9). Using the three-alternative forced choice method, a concentration series of NAs were presented to the sensory panels in phosphate buffer (pH 8) and in steamed fish (Sander vitreus). In buffer, the odor detection thresholds of Acros, Merichem and Pond 9 NAs, as evaluated by the trained panelists, were 1.5, 0.04, and 1.0 mg L(-1), respectively. Only the detection threshold for the Merichem NAs was significantly different (p<0.01) than the other two sources. Based on the general population assessments, all three odor detection thresholds were significantly different from one another; 4.8, 0.2, and 2.5 mg L(-1) for Acros, Merichem, and Pond 9 NAs, respectively (p<0.01). The odor detection thresholds of Merichem and Pond 9 NAs in steamed fish were 0.6 and 12 mg kg(-1), respectively and were significantly different from each other (p<0.01). The detection threshold of Acros NAs was estimated to be >21 mg kg(-1). For the steamed fish evaluations, the odor descriptors of all three of the NAs preparations was given as chemical in nature (Acros: oil, plastic; Merichem: gasoline; Pond 9: gasoline, tar). Exposure of live rainbow trout to a non-lethal concentration of Merichem NAs (3 mg L(-1) for 10 d) imparted an odor to the fish flesh. Analyses of the three NAs preparations by gas chromatography-mass spectrometry showed that each had a unique distribution of acids. We conclude that the source of the NAs is important when interpreting odor threshold data and that the two commercial preparations of NAs that were tested do not represent oil sands waters

  9. Tunable polymeric sorbent materials for fractionation of model naphthenates.

    PubMed

    Mohamed, Mohamed H; Wilson, Lee D; Headley, John V

    2013-04-04

    The sorption properties are reported for several examples of single-component carboxylic acids representing naphthenic acids (NAs) with β-cyclodextrin (β-CD) based polyurethane sorbents. Seven single-component examples of NAs were chosen with variable z values, carbon number, and chemical structure as follows: 2-hexyldecanoic acid (z = 0 and C = 16; S1), n-caprylic acid (z = 0 and C = 8; S2), trans-4-pentylcyclohexanecarboxylic acid (z = -2 and C = 12; S3), 4-methylcyclohexanecarboxylic acid (z = -2 and C = 8; S4), dicyclohexylacetic acid (z = -4; C = 14; S5), 4-pentylbicyclo[2.2.2]octane-1-carboxylic acid (z = -4; C = 14; S6), and lithocholic acid (z = -6; C = 24; S7). The copolymer sorbents were synthesized at three relative β-CD:diisocyanate mole ratios (i.e., 1:1, 1:2, and 1:3) using 4,4'-dicyclohexylmethane diisocyanate (CDI) and 4,4'-diphenylmethane diisocyanate (MDI). The sorption properties of the copolymer sorbents were characterized using equilibrium sorption isotherms in aqueous solution at pH 9.00 with electrospray ionization mass spectrometry. The equilibrium fraction of the unbound carboxylate anions was monitored in the aqueous phase. The sorption properties of the copolymer sorbents (i.e., Qm) were obtained from the Sips isotherm model. The Qm values generally decrease as the number of accessible β-CD inclusion sites in the copolymer framework decreases. The chemical structure of the adsorbates played an important role in their relative uptake, as evidenced by the adsorbate lipophilic surface area (LSA) and the involvement of hydrophobic effects. The copolymers exhibit molecular selective sorption of the single-component carboxylates in mixtures which suggests their application as sorbents for fractionation of mixtures of NAs. By comparison, granular activated carbon (GAC) and chitosan sorbents did not exhibit any significant molecular selective sorption relative to the copolymer materials; however, evidence of variable sorption capacity was

  10. Process for producing a petroleum wax composition

    SciTech Connect

    Jones, R.L.

    1991-04-23

    This patent describes a process for producing a wax composition. It comprises: vacuum distilling a petroleum feed to prepare a 650 distillate heavy intermediate petroleum wax, having a melting point range of from about 155{degrees}F. to about 185{degrees}F., subjecting the heavy intermediate petroleum wax to furfural/duosol solvent extraction, dissolving and crystallizing the heavy intermediate petroleum wax from a methyl ethyl ketone/toluene mixed solvent, dissolving and recrystallizing the heavy intermediate petroleum wax from a methyl ethyl ketone/toluene mixed solvent, percolating the recrystallized heavy intermediate petroleum wax in the molten state through a clay bed; and blending the recrystallized heavy intermediate petroleum wax from about 50 weight percent to about 90 weight percent with from about 10 weight percent to about 30 weight percent of a polymeric compound selected from the group consisting of ethylene-vinyl acetate copolymer, ethylene-ethyl acrylate copolymer, polypropylene and mixtures there of and having a molecular weight of from about 2,000 to about 100,000 and a melt index of from about 1 to about 250{degrees} at 375{degrees}F.

  11. Energy Bandwidth for Petroleum Refining Processes

    SciTech Connect

    none,

    2006-10-01

    The petroleum refining energy bandwidth report analyzes the most energy-intensive unit operations used in U.S. refineries: crude oil distillation, fluid catalytic cracking, catalytic hydrotreating, catalytic reforming, and alkylation. The "bandwidth" provides a snapshot of the energy losses that can potentially be recovered through best practices and technology R&D.

  12. Catalytic distillation process

    DOEpatents

    Smith, L.A. Jr.

    1982-06-22

    A method is described for conducting chemical reactions and fractionation of the reaction mixture comprising feeding reactants to a distillation column reactor into a feed zone and concurrently contacting the reactants with a fixed bed catalytic packing to concurrently carry out the reaction and fractionate the reaction mixture. For example, a method for preparing methyl tertiary butyl ether in high purity from a mixed feed stream of isobutene and normal butene comprising feeding the mixed feed stream to a distillation column reactor into a feed zone at the lower end of a distillation reaction zone, and methanol into the upper end of said distillation reaction zone, which is packed with a properly supported cationic ion exchange resin, contacting the C[sub 4] feed and methanol with the catalytic distillation packing to react methanol and isobutene, and concurrently fractionating the ether from the column below the catalytic zone and removing normal butene overhead above the catalytic zone.

  13. Catalytic distillation process

    DOEpatents

    Smith, Jr., Lawrence A.

    1982-01-01

    A method for conducting chemical reactions and fractionation of the reaction mixture comprising feeding reactants to a distillation column reactor into a feed zone and concurrently contacting the reactants with a fixed bed catalytic packing to concurrently carry out the reaction and fractionate the reaction mixture. For example, a method for preparing methyl tertiary butyl ether in high purity from a mixed feed stream of isobutene and normal butene comprising feeding the mixed feed stream to a distillation column reactor into a feed zone at the lower end of a distillation reaction zone, and methanol into the upper end of said distillation reaction zone, which is packed with a properly supported cationic ion exchange resin, contacting the C.sub.4 feed and methanol with the catalytic distillation packing to react methanol and isobutene, and concurrently fractionating the ether from the column below the catalytic zone and removing normal butene overhead above the catalytic zone.

  14. Standard test method for acidity of distillation residues or hydrocarbon liquids

    SciTech Connect

    Not Available

    1980-01-01

    This method covers the qualitative determination of the acidity of the distillation residue from a gasoline. The sample of distillation residue or hydrocarbon liquid is shaken with water and the aqueous layer tested for acidity to methyl orange. Some petroleum products are treated with mineral acid as part of the refining procedure. Obviously, any residual mineral acid in a petroleum product is undesirable. The absence of a positive indication in the test for acidity of the distillation residue or aqueous extract of a hydrocarbon liquid is an assurance of the care used in refining the fuel or solvent.

  15. Investigation of aggregation in solvent extraction of lanthanides by acidic extractants (organophosphorus and naphthenic acid)

    USGS Publications Warehouse

    Zhou, N.; Wu, J.; Yu, Z.; Neuman, R.D.; Wang, D.; Xu, G.

    1997-01-01

    Three acidic extractants (I) di(2-ethylhexyl) phosphoric acid (HDEHP), (II) 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEHPEHE) and (III) naphthenic acid were employed in preparing the samples for the characterization of the coordination structure of lanthanide-extractant complexes and the physicochemical nature of aggregates formed in the organic diluent of the solvent extraction systems. Photo correlation spectroscopy (PCS) results on the aggregates formed by the partially saponified HDEHP in n-heptane showed that the hydrodynamic radius of the aggregates was comparable to the molecular dimensions of HDEHP. The addition of 2-octanol into the diluent, by which the mixed solvent was formed, increased the dimensions of the corresponding aggregates. Aggregates formed from the lanthanide ions and HDEHP in the organic phase of the extraction systems were found very unstable. In the case of naphthenic acid, PCS data showed the formation of w/o microemulsion from the saponified naphthenic acid in the mixed solvent. The extraction of lanthanides by the saponified naphthenic acid in the mixed solvent under the given experimental conditions was a process of destruction of the w/o microemulsion. A possible mechanism of the breakdown of the w/o microemulsion droplets is discussed.

  16. Evaluating the hydrophilic-lipophilic nature of asphaltenic oils and naphthenic amphiphiles using microemulsion models.

    PubMed

    Kiran, Sumit K; Acosta, Edgar J; Moran, Kevin

    2009-08-01

    Asphaltenes and naphthenic acid derivatives, which are polar and surface-active species, are known to interfere with the recovery of heavy crude oil by promoting the formation of stable emulsions. In this study, previously established microemulsion phase behavior models were applied to quantify the hydrophilic-lipophilic nature of asphaltenic oils (bitumen, deasphalted bitumen, asphalt, naphthalene) and surface-active species found in heavy oils (naphthenic compounds and asphaltenes). For the test oils, the equivalent alkane carbon number (EACN) was determined by evaluating the "salinity shifts" of microemulsions formulated with a reference surfactant (sodium dihexyl sulfosuccinate--SDHS) and a reference oil (toluene) as a function of test oil volume fraction. Similarly, the characteristic curvature (C(C)) of surface-active species was determined by evaluating the salinity shifts as a function of the molar fraction of the surface-active species in mixture with SDHS. As a part of the oil phase, asphaltenes and asphaltene-like species are highly hydrophilic, which lead to low EACN values despite their large molecular weight. As a surface-active material, asphaltenes are hydrophobic species that lead to the formation of water-in-oil emulsions. Naphthenates, particularly sodium naphthenates, are highly hydrophilic compounds that lead to the formation of oil-in-water emulsions. These hydrophilic-lipophilic characterization parameters, and the methods used to determine them, can be used in the future to understand the phase behavior of complex oil-water systems.

  17. Biodegradation of a surrogate naphthenic acid under denitrifying conditions.

    PubMed

    Gunawan, Yetty; Nemati, Mehdi; Dalai, Ajay

    2014-03-15

    Extraction of bitumen from the shallow oil sands generates extremely large volumes of waters contaminated by naphthenic acid which pose severe environmental and ecological risks. Aerobic biodegradation of NA in properly designed bioreactors has been investigated in our earlier works. In the present work, anoxic biodegradation of trans-4-methyl-1-cyclohexane carboxylic acid (trans-4MCHCA) coupled to denitrification was investigated as a potential ex situ approach for the treatment of oil sand process waters in bioreactors whereby excessive aeration cost could be eliminated, or as an in situ alternative for the treatment of these waters in anoxic stabilization ponds amended with nitrate. Using batch and continuous reactors (CSTR and biofilm), effects of NA concentration (100-750mgL(-1)), NA loading rate (up to 2607.9mgL(-1)h(-1)) and temperature (10-35°C) on biodegradation and denitrification processes were evaluated. In the batch system biodegradation of trans-4MCHCA coupled to denitrification occurred even at the highest concentration of 750mgL(-1). Consistent with the patterns reported for aerobic biodegradation, increase in initial concentration of NA led to higher biodegradation and denitrification rates and the optimum temperature was determined as 23-24°C. In the CSTR, NA removal and nitrate reduction rates passed through a maximum due to increases in NA loading rate. NA loading rate of 157.8mgL(-1)h(-1) at which maximum anoxic NA and nitrate removal rates (105.3mgL(-1)h(-1) and 144.5mgL(-1)h(-1), respectively) occurred was much higher than those reported for the aerobic alternative (NA loading and removal rates: 14.2 and 9.6mgL(-1)h(-1), respectively). In the anoxic biofilm reactor removal rates of NA and nitrate were dependent on NA loading rate in a linear fashion for the entire range of applied loading rates. The highest loading and removal rates for NA were 2607.9 and 2028.1mgL(-1)h(-1), respectively which were at least twofold higher than the values

  18. Advanced Distillation Final Report

    SciTech Connect

    Maddalena Fanelli; Ravi Arora; Annalee Tonkovich; Jennifer Marco; Ed Rode

    2010-03-24

    The Advanced Distillation project was concluded on December 31, 2009. This U.S. Department of Energy (DOE) funded project was completed successfully and within budget during a timeline approved by DOE project managers, which included a one year extension to the initial ending date. The subject technology, Microchannel Process Technology (MPT) distillation, was expected to provide both capital and operating cost savings compared to conventional distillation technology. With efforts from Velocys and its project partners, MPT distillation was successfully demonstrated at a laboratory scale and its energy savings potential was calculated. While many objectives established at the beginning of the project were met, the project was only partially successful. At the conclusion, it appears that MPT distillation is not a good fit for the targeted separation of ethane and ethylene in large-scale ethylene production facilities, as greater advantages were seen for smaller scale distillations. Early in the project, work involved flowsheet analyses to discern the economic viability of ethane-ethylene MPT distillation and develop strategies for maximizing its impact on the economics of the process. This study confirmed that through modification to standard operating processes, MPT can enable net energy savings in excess of 20%. This advantage was used by ABB Lumus to determine the potential impact of MPT distillation on the ethane-ethylene market. The study indicated that a substantial market exists if the energy saving could be realized and if installed capital cost of MPT distillation was on par or less than conventional technology. Unfortunately, it was determined that the large number of MPT distillation units needed to perform ethane-ethylene separation for world-scale ethylene facilities, makes the targeted separation a poor fit for the technology in this application at the current state of manufacturing costs. Over the course of the project, distillation experiments were

  19. Method for evaluating kinetic stability of petroleum disperse systems

    SciTech Connect

    Marushkin, A.B.; Kurochkin, A.K.; Gimaev, R.N.

    1988-01-01

    A method was developed for varying the ratio of paraffinic/naphthenic and aromatic hydrocarbons in petroleum disperse systems by introducing a model dispersion medium and for noting the dynamics of change of petroleum disperse system composition in a triangular diagram. Data for the construction of the system phase equilibrium curves were derived and the phase equilibrium of atmospheric resids, cracked tars, and pyrolysis tars was evaluated. Disruption of phase equilibrium upon introducing a precipitant led to coagulation of the asphaltenes and their separation from the deasphalted product phase in precipitate form. The method can be used in determining the quantity of precipitant required to achieve the necessary depth of deasphalting or to determine deasphalting depth with a given precipitant consumption.

  20. Genome Sequence Analysis of the Naphthenic Acid Degrading and Metal Resistant Bacterium Cupriavidus gilardii CR3

    PubMed Central

    Xiao, Jingfa; Hao, Lirui; Crowley, David E.; Zhang, Zhewen; Yu, Jun; Huang, Ning; Huo, Mingxin; Wu, Jiayan

    2015-01-01

    Cupriavidus sp. are generally heavy metal tolerant bacteria with the ability to degrade a variety of aromatic hydrocarbon compounds, although the degradation pathways and substrate versatilities remain largely unknown. Here we studied the bacterium Cupriavidus gilardii strain CR3, which was isolated from a natural asphalt deposit, and which was shown to utilize naphthenic acids as a sole carbon source. Genome sequencing of C. gilardii CR3 was carried out to elucidate possible mechanisms for the naphthenic acid biodegradation. The genome of C. gilardii CR3 was composed of two circular chromosomes chr1 and chr2 of respectively 3,539,530 bp and 2,039,213 bp in size. The genome for strain CR3 encoded 4,502 putative protein-coding genes, 59 tRNA genes, and many other non-coding genes. Many genes were associated with xenobiotic biodegradation and metal resistance functions. Pathway prediction for degradation of cyclohexanecarboxylic acid, a representative naphthenic acid, suggested that naphthenic acid undergoes initial ring-cleavage, after which the ring fission products can be degraded via several plausible degradation pathways including a mechanism similar to that used for fatty acid oxidation. The final metabolic products of these pathways are unstable or volatile compounds that were not toxic to CR3. Strain CR3 was also shown to have tolerance to at least 10 heavy metals, which was mainly achieved by self-detoxification through ion efflux, metal-complexation and metal-reduction, and a powerful DNA self-repair mechanism. Our genomic analysis suggests that CR3 is well adapted to survive the harsh environment in natural asphalts containing naphthenic acids and high concentrations of heavy metals. PMID:26301592

  1. Genome Sequence Analysis of the Naphthenic Acid Degrading and Metal Resistant Bacterium Cupriavidus gilardii CR3.

    PubMed

    Wang, Xiaoyu; Chen, Meili; Xiao, Jingfa; Hao, Lirui; Crowley, David E; Zhang, Zhewen; Yu, Jun; Huang, Ning; Huo, Mingxin; Wu, Jiayan

    2015-01-01

    Cupriavidus sp. are generally heavy metal tolerant bacteria with the ability to degrade a variety of aromatic hydrocarbon compounds, although the degradation pathways and substrate versatilities remain largely unknown. Here we studied the bacterium Cupriavidus gilardii strain CR3, which was isolated from a natural asphalt deposit, and which was shown to utilize naphthenic acids as a sole carbon source. Genome sequencing of C. gilardii CR3 was carried out to elucidate possible mechanisms for the naphthenic acid biodegradation. The genome of C. gilardii CR3 was composed of two circular chromosomes chr1 and chr2 of respectively 3,539,530 bp and 2,039,213 bp in size. The genome for strain CR3 encoded 4,502 putative protein-coding genes, 59 tRNA genes, and many other non-coding genes. Many genes were associated with xenobiotic biodegradation and metal resistance functions. Pathway prediction for degradation of cyclohexanecarboxylic acid, a representative naphthenic acid, suggested that naphthenic acid undergoes initial ring-cleavage, after which the ring fission products can be degraded via several plausible degradation pathways including a mechanism similar to that used for fatty acid oxidation. The final metabolic products of these pathways are unstable or volatile compounds that were not toxic to CR3. Strain CR3 was also shown to have tolerance to at least 10 heavy metals, which was mainly achieved by self-detoxification through ion efflux, metal-complexation and metal-reduction, and a powerful DNA self-repair mechanism. Our genomic analysis suggests that CR3 is well adapted to survive the harsh environment in natural asphalts containing naphthenic acids and high concentrations of heavy metals.

  2. Datalogging the Distillation Process.

    ERIC Educational Resources Information Center

    Soares, Allan; Creevy, Steven

    1995-01-01

    Presents a distillation experiment that uses temperature sensors connected to a computer in place of thermometers, and enables the whole class to view the data on a monitor and interpret and discuss the data in real time. (JRH)

  3. Distillation for alcohol

    SciTech Connect

    Kawase, T.; Sawai, K.

    1983-02-22

    A new distillation equipment for alcohol which consists mainly of a brief concentrating column a, a concentrating column b, a compressor C to compress alcohol vapor generated in column B and water evaporator D heated by the compressed alcohol vapor is developed and this especially fits for a distillation source of a glue like solution obtained by alcohol fermentation because steam generated in the water evaporator D is directly blown into the solution in the concentrating column A.

  4. Petroleum marketing monthly, January 1996 with data for October 1995

    SciTech Connect

    1996-01-04

    The Petroleum Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane.

  5. Petroleum marketing monthly, April 1997 with data for January 1997

    SciTech Connect

    1997-04-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  6. Petroleum supply annual 1996: Volume 1

    SciTech Connect

    1997-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1996 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Capacity; each with final annual data. The summary statistics section show 16 years of data depicting the balance between supply, disposition and ending stocks for various commodities including crude oil, motor gasoline, distillate fuel oil, residual fuel oil, jet fuel propane/propylene, and liquefied petroleum gases. The detailed statistics section provide 1996 detailed statistics on supply and disposition, refinery operations, imports and exports, stocks, and transportation of crude oil and petroleum products. The refinery capacity contain listings of refineries and associated crude oil distillation and downstream capacities by State, as of January 1, 1997, as well as summaries of corporate refinery capacities and refinery storage capacities. In addition, refinery receipts of crude oil by method of transportation for 1996 are provided. Also included are fuels consumed at refineries, and lists of shutdowns, sales, reactivations, and mergers during 1995 and 1996. 16 figs., 59 tabs.

  7. DISTILLATION OF CALCIUM

    DOEpatents

    Barton, J.

    1954-07-27

    This invention relates to an improvement in the process for the purification of caicium or magnesium containing an alkali metal as impurity, which comprises distiiling a batch of the mixture in two stages, the first stage distillation being carried out in the presence of an inert gas at an absolute pressure substantially greater than the vapor pressure of calcium or maguesium at the temperature of distillation, but less than the vaper pressure at that temperature of the alkali metal impurity so that only the alkali metal is vaporized and condensed on a condensing surface. A second stage distilso that substantially only the calcium or magnesium distills under its own vapor pressure only and condenses in solid form on a lower condensing surface.

  8. Petroleum marketing monthly, September 1990. [Contains Glossary

    SciTech Connect

    Not Available

    1990-12-11

    This report is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, education institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 55 tabs.

  9. Measurement of naphthenic acids in the receiving waters around an offshore oil platform by passive sampling.

    PubMed

    Harman, Christopher; Langford, Katherine; Sundt, Rolf C; Brooks, Steven

    2014-09-01

    Polar organic chemical integrative samplers (POCIS) were deployed in the vicinity of an offshore oil installation and analyzed for naphthenic acids (NAs). The POCIS accumulated a range of mono- to tetracyclic NAs, with different degrees of alkylation, with monocyclic acids being the most abundant. Currently, POCIS or similar polar samplers may be the only way to measure exposure to NAs from offshore discharges in situ. In addition, they may be a valuable tool for monitoring similar organic acids in general.

  10. Application of microemulsions in determination of chromium naphthenate in gasoline by flame atomic absorption spectroscopy.

    PubMed

    Du, B; Wei, Q; Wang, S; Yu, W

    1997-10-01

    A new method using microemulsified samples is presented. It is for the determination of chromium naphthenate in gasoline by flame absorption spectroscopy. The method has the advantage of simplicity, speed and the use of aqueous standards for calibration instead of organic standards. Coexistent elements do not disturb the determination. Results obtained by this method were better than those obtained by other methods for the same samples.

  11. Prebiotic Petroleum

    NASA Astrophysics Data System (ADS)

    Ali, Mekki-Berrada

    2014-12-01

    This short communication summarizes a global and continuous reflection on the origins of life. "Prebiotic Petroleum" assumes that " the class of most complex molecules of life that may have geochemical and abiotic origin is the class of fatty acids with long aliphatic chains" and proposes a physical process for the formation of liposomes. Developments following the workshop start from the idea that the liposomes also acquire ion exchange channels physically during their forming process.

  12. Prebiotic petroleum.

    PubMed

    Ali, Mekki-Berrada

    2014-12-01

    This short communication summarizes a global and continuous reflection on the origins of life. "Prebiotic Petroleum" assumes that "the class of most complex molecules of life that may have geochemical and abiotic origin is the class of fatty acids with long aliphatic chains" and proposes a physical process for the formation of liposomes. Developments following the workshop start from the idea that the liposomes also acquire ion exchange channels physically during their forming process.

  13. Petroleum marketing monthly with data for September 1997

    SciTech Connect

    1997-12-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures and accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  14. Petroleum marketing monthly, May 1995 with data for February 1995

    SciTech Connect

    1995-05-09

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  15. Petroleum marketing monthly with data for May 1997

    SciTech Connect

    1997-08-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  16. Rhamnolipid produced by Pseudomonas aeruginosa USM-AR2 facilitates crude oil distillation.

    PubMed

    Asshifa Md Noh, Nur; Al-Ashraf Abdullah, Amirul; Nasir Mohamad Ibrahim, Mohamad; Ramli Mohd Yahya, Ahmad

    2012-01-01

    A biosurfactant-producing and hydrocarbon-utilizing bacterium, Pseudomonas aeruginosa USM-AR2, was used to assist conventional distillation. Batch cultivation in a bioreactor gave a biomass of 9.4 g L(-1) and rhamnolipid concentration of 2.4 g L(-1) achieved after 72 h. Biosurfactant activity (rhamnolipid) was detected by the orcinol assay, emulsification index and drop collapse test. Pretreatment of crude oil TK-1 and AG-2 with a culture of P. aeruginosa USM-AR2 that contains rhamnolipid was proven to facilitate the distillation process by reducing the duration without reducing the quality of petroleum distillate. It showed a potential in reducing the duration of the distillation process, with at least 2- to 3-fold decreases in distillation time. This is supported by GC-MS analysis of the distillate where there was no difference between compounds detected in distillate obtained from treated or untreated crude oil. Calorimetric tests showed the calorie value of the distillate remained the same with or without treatment. These two factors confirmed that the quality of the distillate was not compromised and the incubation process by the microbial culture did not over-degrade the oil. The rhamnolipid produced by this culture was the main factor that enhanced the distillation performance, which is related to the emulsification of hydrocarbon chains in the crude oil. This biotreatment may play an important role to improve the existing conventional refinery and distillation process. Reducing the distillation times by pretreating the crude oil with a natural biosynthetic product translates to energy and cost savings in producing petroleum products.

  17. Tritium Attenuation by Distillation

    SciTech Connect

    Wittman, N.E.

    2001-07-31

    The objective of this study was to determine how a 100 Area distillation system could be used to reduce to a satisfactory low value the tritium content of the dilute moderator produced in the 100 Area stills, and whether such a tritium attenuator would have sufficient capacity to process all this material before it is sent to the 400 Area for reprocessing.

  18. Energy savings in distillation via identification of useful configurations

    NASA Astrophysics Data System (ADS)

    Shah, Vishesh Hemanshu

    with low heat duties. The heat duty requirements are estimated using the Underwood equations. Application of these frameworks has provided an array of distillation configurations that can potentially have up to 50% lower heat duty than the currently used distillation configuration for petroleum crude distillation. Since petroleum crude distillation is a highly energy-intensive process, these configurations have tremendous potential to improve the energy efficiency of a refinery. Furthermore, we provide evidence to disprove some conventional notions about thermally coupled configurations. We also describe some previously unknown distillation configurations that use less than (n-1) distillation columns for an n-component separation. We demonstrate that these novel distillation configurations have significantly lower heat duties than the currently known distillation configurations with less than (n-1) columns. Since these configurations have one or more distillation columns that produce sidestreams, a quick screening tool based on Underwood's equations cannot be used to estimate the heat duty requirements of these configurations. Therefore, we lay the foundation for equations analogous to Underwood's equations to estimate the minimum heat duty requirements of such distillation configurations.

  19. 27 CFR 27.40 - Distilled spirits.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... OF THE TREASURY ALCOHOL IMPORTATION OF DISTILLED SPIRITS, WINES, AND BEER Tax On Imported Distilled Spirits, Wines, and Beer Distilled Spirits § 27.40 Distilled spirits. (a) A tax is imposed on...

  20. 27 CFR 27.40 - Distilled spirits.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... OF THE TREASURY ALCOHOL IMPORTATION OF DISTILLED SPIRITS, WINES, AND BEER Tax On Imported Distilled Spirits, Wines, and Beer Distilled Spirits § 27.40 Distilled spirits. (a) A tax is imposed on...

  1. 27 CFR 27.40 - Distilled spirits.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... OF THE TREASURY LIQUORS IMPORTATION OF DISTILLED SPIRITS, WINES, AND BEER Tax On Imported Distilled Spirits, Wines, and Beer Distilled Spirits § 27.40 Distilled spirits. (a) A tax is imposed on...

  2. 27 CFR 27.40 - Distilled spirits.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... OF THE TREASURY LIQUORS IMPORTATION OF DISTILLED SPIRITS, WINES, AND BEER Tax On Imported Distilled Spirits, Wines, and Beer Distilled Spirits § 27.40 Distilled spirits. (a) A tax is imposed on...

  3. 27 CFR 27.40 - Distilled spirits.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... OF THE TREASURY LIQUORS IMPORTATION OF DISTILLED SPIRITS, WINES, AND BEER Tax On Imported Distilled Spirits, Wines, and Beer Distilled Spirits § 27.40 Distilled spirits. (a) A tax is imposed on...

  4. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  5. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  6. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  7. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  8. Cascade Distillation System Development

    NASA Technical Reports Server (NTRS)

    Callahan, Michael R.; Sargushingh, Miriam; Shull, Sarah

    2014-01-01

    NASA's Advanced Exploration Systems (AES) Life Support System (LSS) Project is chartered with de-veloping advanced life support systems that will ena-ble NASA human exploration beyond low Earth orbit (LEO). The goal of AES is to increase the affordabil-ity of long-duration life support missions, and to re-duce the risk associated with integrating and infusing new enabling technologies required to ensure mission success. Because of the robust nature of distillation systems, the AES LSS Project is pursuing develop-ment of the Cascade Distillation Subsystem (CDS) as part of its technology portfolio. Currently, the system is being developed into a flight forward Generation 2.0 design.

  9. Petroleum marketing monthly, December 1996 with data for September 1996

    SciTech Connect

    1996-12-01

    This report provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  10. Investigation of sources, properties and preparation of distillate test fuels

    NASA Technical Reports Server (NTRS)

    Bowden, J. N.; Erwin, J.

    1983-01-01

    Distillate test fuel blends were generated for prescribed variations in composition and physical properties. Fuels covering a wide range in properties and composition which would provide a matrix of fuels for possible use in future combustion research programs were identified. Except for tetralin the blending components were all from typical refinery streams. Property variation blends span a boiling range within 150 C to 335 C, freezing point -23 C to -43 C, aromatic content 20 to 50 volume percent, hydrogen content 11.8 to 14.2 mass percent, viscosity 4 and 11 cSt (-20 C), and naphthalenes 8 and 16 volume percent. Composition variation blends were made with two base stocks, one paraffinic and the other napthenic. To each base stock was added each of three aromatic type fuels (alkyl benzenes, tetralin, and naphthalenes) for assigned initial boiling point, final boiling point, and hydrogen content. The hydrogen content was 13.5 mass percent for the paraffinic base stock blends and 12.5 mass percent and 11.5 mass percent for the naphthenic base stock blends. Sample 5-gallon quantities of all blends were prepared and analyzed.

  11. Assessing accumulation and biliary excretion of naphthenic acids in yellow perch exposed to oil sands-affected waters.

    PubMed

    van den Heuvel, Michael R; Hogan, Natacha S; MacDonald, Gillian Z; Berrue, Fabrice; Young, Rozlyn F; Arens, Collin J; Kerr, Russell G; Fedorak, Phillip M

    2014-01-01

    Naphthenic acids are known to be the most prevalent group of organic compounds in oil sands tailings-associated waters. Yellow perch (Perca flavescens) were exposed for four months to oil sands-influenced waters in two experimental systems located on an oil sands lease 30 km north of Fort McMurray Alberta: the Demonstration Pond, containing oil sands tailings capped with natural surface water, and the South Bison Pond, integrating lean oil sands. Yellow perch were also sampled from three lakes: Mildred Lake that receives water from the Athabasca River, Sucker Lake, at the edge of oil sands extraction activity, and Kimowin Lake, a distant reference site. Naphthenic acids were measured in perch muscle tissue using gas chromatography-mass spectrometry (GC-MS). Bile metabolites were measured by GC-MS techniques and by high performance liquid chromatography (HPLC) with fluorescence detection at phenanthrene wavelengths. A method was developed using liquid chromatography-high resolution mass spectrometry (LC-HRMS) to evaluate naphthenic acids in bile. Tissue analysis did not show a pattern of naphthenic acids accumulation in muscle tissue consistent with known concentrations in exposed waters. Bile fluorescence and LC-HRMS methods were capable of statistically distinguishing samples originating from oil sands-influenced waters versus reference lakes. Although the GC-MS and HPLC fluorescence methods were correlated, there were no significant correlations of these methods and the LC-HRMS method. In yellow perch, naphthenic acids from oil sands sources do not concentrate in tissue at a measurable amount and are excreted through a biliary route. LC-HRMS was shown to be a highly sensitive, selective and promising technique as an indicator of exposure of biota to oil sands-derived naphthenic acids.

  12. Kinetics of liquid-solid reactions in naphthenic acid conversion and Kraft pulping

    NASA Astrophysics Data System (ADS)

    Yang, Ling

    Two liquid-solid reactions, in which the morphology of the solid changes as the reactions proceeds, were examined. One is the NA conversion in oil by decarboxylation on metal oxides and carbonates, and the other is the Kraft pulping in which lignin removal by delignification reaction. In the study of the NA conversion, CaO was chosen as the catalyst for the kinetic study from the tested catalysts based on NA conversion. Two reaction mixtures, carrier oil plus commercial naphthenic acids and heavy vacuum gas oil (HVGO) from Athabasca bitumen, were applied in the kinetic study. The influence of TAN, temperature, and catalyst loading on the NA conversion and decarboxylation were studied systematically. The results showed that the removal rate of TAN and the decarboxylation of NA were both independent of the concentration of NA over the range studied, and significantly dependent on reaction temperature. The data from analyzing the spent catalyst demonstrated that calcium naphthenate was an intermediate of the decarboxylation reaction of NA, and the decomposition of calcium naphthenate was a rate-determining step. In the study on the delignification of the Kraft pulping, a new mechanism was proposed for the heterogeneous delignification reaction during the Kraft pulping process. In particular, the chemical reaction mechanism took into account the heterogeneous nature of Kraft pulping. Lignin reacted in parallel with sodium hydroxide and sodium sulfide. The mechanism consists of three key kinetic steps: (1) adsorption of hydroxide and hydrosulfide ions on lignin; (2) surface reaction on the solid surface to produce degraded lignin products; and (3) desorption of degradation products from the solid surface. The most important step for the delignification process is the surface reaction, rather than the reactions occurring in the liquid phase. A kinetic model has, thus, been developed based on the proposed mechanism. The derived kinetic model showed that the mechanism

  13. Co-processing of carbonaceous solids and petroleum oil

    DOEpatents

    Gupta, Avinash; Greene, Marvin I.

    1992-01-01

    In a process for producing distillates from coal by a first stage thermal liquefaction followed by a catalytic hydrogenation, liquefaction solvent is added at points spaced over the length of the thermal liquefaction heater. Coal may be co-processed with petroleum oil by adding pre-hydrogenated oil to the first stage or unhydrogenated oil to the second stage.

  14. Naphthenic acids in coastal sediments after the Hebei Spirit oil spill: a potential indicator for oil contamination.

    PubMed

    Wan, Yi; Wang, Beili; Khim, Jong Seong; Hong, Seongjin; Shim, Won Joon; Hu, Jianying

    2014-04-01

    Naphthenic acids (NAs) as toxic components in most petroleum sources are suspected to be one of the major pollutants in the aquatic environment following oil spills, and the polarity and persistence of NAs make it a potential indicator for oil contamination. However, the contamination and potential effects of pollutants in oil spill affected areas remain unknown. To investigate NAs in oil spill affected areas, a sensitive method was first established for analysis of NAs, together with oxy-NAs in sediment samples by UPLC-QTOF-MS. Then the method was applied to determine the NA mixtures in crude oil, weathered oil, and sediments from the spilled sites after the Hebei Spirit oil spill, Taean, South Korea (Dec. 2007). Concentrations of NAs, O3-NAs, and O4-NAs were found to be 7.8-130, 3.6-44, and 0.8-20 mg kg(-1) dw in sediments from the Taean area, respectively, which were much greater than those measured in the reference sites of Manlipo and Anmyundo beaches. Concentrations of NAs were 50-100 times greater than those (0.077-2.5 mg kg(-1) dw) of PAHs in the same sediment samples, thus the ecological risk of NAs in oil spill affected areas deserves more attention. The sedimentary profiles of oil-derived NAs and background NAs centered around compounds with 21-35 and 12-21 carbons, respectively, indicating that the crude-derived NA mixtures originating from the 2007 oil spill were persistent. Acyclic NAsn=5-20 were easily degraded compared to cyclic NAsn=21-41 during the oil weathering processes, and the ratio of oxy-NAsn=21-41 relative to NAsn=21-41 could be a novel index to estimate the degree of oil weathering in sediments. Altogether, the persistent oil-derived NAsn=21-41 could be used as a potential indicator for oil-specific contamination, as such compounds would not be much affected by the properties of coastal sediments possibly due to the high sorption of the negatively charged compounds (NAs) in sediment.

  15. Hybrid Separations/Distillation Technology. Research Opportunities for Energy and Emissions Reduction

    SciTech Connect

    Eldridge, R. Bruce; Seibert, A. Frank; Robinson, Sharon; Rogers, Jo

    2005-04-01

    This report focuses on improving the existing separations systems for the two largest energy-consuming sectors: the chemicals and petroleum refining industries. It identifies the technical challenges and research needs for improving the efficiency of distillation systems. Areas of growth are also highlighted.

  16. Vapor compression distillation module

    NASA Technical Reports Server (NTRS)

    Nuccio, P. P.

    1975-01-01

    A Vapor Compression Distillation (VCD) module was developed and evaluated as part of a Space Station Prototype (SSP) environmental control and life support system. The VCD module includes the waste tankage, pumps, post-treatment cells, automatic controls and fault detection instrumentation. Development problems were encountered with two components: the liquid pumps, and the waste tank and quantity gauge. Peristaltic pumps were selected instead of gear pumps, and a sub-program of materials and design optimization was undertaken leading to a projected life greater than 10,000 hours of continuous operation. A bladder tank was designed and built to contain the waste liquids and deliver it to the processor. A detrimental pressure pattern imposed upon the bladder by a force-operated quantity gauge was corrected by rearranging the force application, and design goals were achieved. System testing has demonstrated that all performance goals have been fulfilled.

  17. Petroleum Sector (NAICS 324)

    EPA Pesticide Factsheets

    Find relevant environmental regulations for the petroleum industry (NAICS 324), including National Emission Standards for Hazardous Air Pollutants (NESHAP)s for petroleum refineries and gasoline dispensing & effluent guidelines for oil and gas extraction

  18. Petroleum Processing Wastes.

    ERIC Educational Resources Information Center

    Baker, D. A.

    1978-01-01

    Presents a literature review of the petroleum processing wastes, covering publications of 1977. This review covers studies such as the use of activated carbon in petroleum and petrochemical waste treatment. A list of 15 references is also presented. (HM)

  19. Reactive Distillation for Esterification of Bio-based Organic Acids

    SciTech Connect

    Fields, Nathan; Miller, Dennis J.; Asthana, Navinchandra S.; Kolah, Aspi K.; Vu, Dung; Lira, Carl T.

    2008-09-23

    The following is the final report of the three year research program to convert organic acids to their ethyl esters using reactive distillation. This report details the complete technical activities of research completed at Michigan State University for the period of October 1, 2003 to September 30, 2006, covering both reactive distillation research and development and the underlying thermodynamic and kinetic data required for successful and rigorous design of reactive distillation esterification processes. Specifically, this project has led to the development of economical, technically viable processes for ethyl lactate, triethyl citrate and diethyl succinate production, and on a larger scale has added to the overall body of knowledge on applying fermentation based organic acids as platform chemicals in the emerging biorefinery. Organic acid esters constitute an attractive class of biorenewable chemicals that are made from corn or other renewable biomass carbohydrate feedstocks and replace analogous petroleum-based compounds, thus lessening U.S. dependence on foreign petroleum and enhancing overall biorefinery viability through production of value-added chemicals in parallel with biofuels production. Further, many of these ester products are candidates for fuel (particularly biodiesel) components, and thus will serve dual roles as both industrial chemicals and fuel enhancers in the emerging bioeconomy. The technical report from MSU is organized around the ethyl esters of four important biorenewables-based acids: lactic acid, citric acid, succinic acid, and propionic acid. Literature background on esterification and reactive distillation has been provided in Section One. Work on lactic acid is covered in Sections Two through Five, citric acid esterification in Sections Six and Seven, succinic acid in Section Eight, and propionic acid in Section Nine. Section Ten covers modeling of ester and organic acid vapor pressure properties using the SPEAD (Step Potential

  20. Mechanistic investigation of industrial wastewater naphthenic acids removal using granular activated carbon (GAC) biofilm based processes.

    PubMed

    Islam, Md Shahinoor; Zhang, Yanyan; McPhedran, Kerry N; Liu, Yang; Gamal El-Din, Mohamed

    2016-01-15

    Naphthenic acids (NAs) found in oil sands process-affected waters (OSPW) have known environmental toxicity and are resistant to conventional wastewater treatments. The granular activated carbon (GAC) biofilm treatment process has been shown to effectively treat OSPW NAs via combined adsorption/biodegradation processes despite the lack of research investigating their individual contributions. Presently, the NAs removals due to the individual processes of adsorption and biodegradation in OSPW bioreactors were determined using sodium azide to inhibit biodegradation. For raw OSPW, after 28 days biodegradation and adsorption contributed 14% and 63% of NA removal, respectively. For ozonated OSPW, biodegradation removed 18% of NAs while adsorption reduced NAs by 73%. Microbial community 454-pyrosequencing of bioreactor matrices indicated the importance of biodegradation given the diverse carbon degrading families including Acidobacteriaceae, Ectothiorhodospiraceae, and Comamonadaceae. Overall, results highlight the ability to determine specific processes of NAs removals in the combined treatment process in the presence of diverse bacteria metabolic groups found in GAC bioreactors.

  1. Determination of naphthenic acids in crude oils using nonaqueous ion exchange solid-phase extraction.

    PubMed

    Jones, D M; Watson, J S; Meredith, W; Chen, M; Bennett, B

    2001-02-01

    A method is presented for the routine, rapid, and quantitative analysis of aliphatic and naphthenic acids in crude oils, based on their isolation using nonaqueous ion exchange solid-phase extraction cartridges. The isolated acid fractions are methylated and analyzed by gas chromatography and gas chromatography/mass spectrometry. The method is effective on both light and heavy oils and is capable of providing mechanistic information of geochemical significance on the origin of the acids in the oils. Analysis of oils that were solvent extracted from laboratory and field mesocosm marine sediment oil degradation studies indicate that this new method of analyzing the products of hydrocarbon biodegradation may be a useful tool for monitoring the progress of bioremediation of oil spills in the environment.

  2. Use of absorption spectroscopy for refined petroleum product discrimination

    NASA Astrophysics Data System (ADS)

    Short, Michael

    1991-07-01

    On-line discrimination between arbitrary petroleum products is necessary for optimal control of petroleum refinery and pipeline operation and process control involving petroleum distillates. There are a number of techniques by which petroleum products can be distinguished from one another. Among these, optical measurements offer fast, non-intrusive, real-time characterization. The application examined here involves optically monitoring the interface between dissimilar batches of fluids in a gasoline pipeline. After examination of near- infrared and mid-infrared absorption spectroscopy and Raman spectroscopy, Fourier transform mid-infrared (FTIR) spectroscopy was chosen as the best candidate for implementation. On- line FTIR data is presented, verifying the applicability of the technique for batch interface detection.

  3. Potential applications of bioprocess technology in petroleum industry.

    PubMed

    Singh, Ajay; Singh, Brajesh; Ward, Owen

    2012-11-01

    Petroleum refining is traditionally based on the use of physicochemical processes such as distillation and chemical catalysis that operate under high temperatures and pressures conditions, which are energy intensive and costly. Biotechnology has become an important tool for providing new approaches in petroleum industry during oil production, refining and processing as well as managing environmentally safe pollutant remediation and disposal practices. Earlier biotechnology applications in the petroleum industry were limited to microbial enhanced oil recovery, applications of bioremediation to contaminated marine shorelines, soils and sludges. The potential role of bioprocess technology in this industry has now expanded further into the areas of biorefining and upgrading of fuels, production of fine chemicals, control of souring during production and air VOC biofiltration. In this paper we provide an overview of the major applications of bioprocesses and technology development in the petroleum industry both in upstream and downstream areas and highlight future challenges and opportunities.

  4. Photocatalytic degradation of commercially sourced naphthenic acids by TiO2-graphene composite nanomaterial.

    PubMed

    Liu, Juncheng; Wang, Lin; Tang, Jingchun; Ma, Jianli

    2016-04-01

    Naphthenic acids (NAs) are a major contributor to the toxicity in oil sands process-affected water (OSPW), which is produced by hot water extraction of bitumen. NAs are extremely difficult to be degraded due to its complex ring and side chain structure. Photocatalysis is recognized as a promising technology in the removal of refractory organic pollutants. In this work, TiO2-graphene (P25-GR) composites were synthesized by means of solvothermal method. The results showed that P25-GR composite exhibited better photocatalytic activity than pure P25. The removal efficiency of naphthenic acids in acid solution was higher than that in neutral and alkaline solutions. It was the first report ever known on the photodegradation of NAs based on graphene, and this process achieved a higher removal rate than other photocatalysis degradation of NAs in a shorter reaction time. LC/MS analysis showed that macromolecular NAs (carbon number 17-22, z value -2) were easy to be degraded than the micromolecular ones (carbon number 11-16, z value -2). Furthermore, the reactive oxygen species that play the main role in the photocatalysis system were studied. It was found that holes and ·OH were the main reactive species in the UV/P25-GR photocatalysis system. Given the high removal efficiency of refractory organic pollutants and the short degradation time, photodegradation based on composite catalysts has a broad and practical prospect. The study on the photodegradation of commercially sourced NAs may provide a guidance for the degradation of OSPW NAs by this method.

  5. Geologic constraints and controls on petroleum migration in eastern Venezuela basin

    SciTech Connect

    Aymard, R.; Baker, D.R.; Lander, R.

    1986-05-01

    This work focuses on the petroleum accumulations of the Anaco, Greater Oficina, and Faja (heavy-oil) areas along a north-south transect through the Eastern Venezuela basin. The authors believe these major accumulations are directly related to the Tertiary generative basin defined by the enormous fill of Tertiary sediments extending from the Guayana shield shelf edge on the south to the loci of Tertiary depocenters adjacent to the Venezuela coastal cordillera on the north. Factors that place constraints on the evolution of petroleum development in the Eastern Venezuela basin include: (1) accumulations of heavy oil in the Faja are unusually large; (2) petroleum in the Greater Oficina area is dominantly paraffinic-naphthenic, but is variable; (3) paraffinic (waxy) petroleum occurs within the Anaco area (4) petroleum is concentrated in the basal part of the Tertiary section; (5) most of the petroleum in sandstone reservoirs occurs near the shelf edge within immature sections, i.e., below the oil-generation threshold; and (6) petroleum is trapped on the north (basinal) side of faults. The major controls of petroleum variability and occurrence appear to be: (1) the temporal relationship between the generation and fluid expulsion history of the Tertiary basin fill; (2) the stratigraphic framework involving distinctive regressive-transgressive sequences that progressively onlap the shelf edge and are characterized by repetitive sedimentary packages (lower prodelta and upper transgressive shales separated by medial sandstones), which behaved as semi-independent units of generation, expulsion, and migration; (3) the related temporal development of the faults as effective seals.

  6. The potential for low petroleum gasoline

    SciTech Connect

    Hadder, G.R.; Webb, G.M.; Clauson, M.

    1996-06-01

    The Energy Policy Act requires the Secretary of Energy to determine the feasibility of producing sufficient replacement fuels to replace at least 30 percent of the projected consumption of motor fuels by light duty vehicles in the year 2010. The Act also requires the Secretary to determine the greenhouse gas implications of the use of replacement fuels. A replacement fuel is a non-petroleum portion of gasoline, including certain alcohols, ethers, and other components. The Oak Ridge National Laboratory Refinery Yield Model has been used to study the cost and refinery impacts for production of {open_quotes}low petroleum{close_quotes} gasolines, which contain replacement fuels. The analysis suggests that high oxygenation is the key to meeting the replacement fuel target, and a major contributor to cost increase is investment in processes to produce and etherify light olefins. High oxygenation can also increase the costs of control of vapor pressure, distillation properties, and pollutant emissions of gasolines. Year-round low petroleum gasoline with near-30 percent non-petroleum components might be produced with cost increases of 23 to 37 cents per gallon of gasoline, and with greenhouse gas emissions changes between a 3 percent increase and a 16 percent decrease. Crude oil reduction, with decreased dependence on foreign sources, is a major objective of the low petroleum gasoline program. For year-round gasoline with near-30 percent non-petroleum components, crude oil use is reduced by 10 to 12 percent, at a cost $48 to $89 per barrel. Depending upon resolution of uncertainties about extrapolation of the Environmental Protection Agency Complex Model for pollutant emissions, availability of raw materials and other issues, costs could be lower or higher.

  7. Revamp for more middle distillate

    SciTech Connect

    Weeks, D.J.; Pierce, V.E.

    1985-03-01

    In view of the continued decline in demand for residual fuel oil, the much publicised tightness of refining margins and hence funds for new investment, it is appropriate at this time to review some relatively inexpensive, but well-proven, revamp options that are available to the refiner for increasing yields of mid-distillate products at the expense of fuel oil components. With the partial or complete closure of so much refining capacity, much surplus equipment is available for implementing revamp projects. There is also scope for revamping hitherto moth-balled units and operating them in a manner different from that envisaged during their original design. Some long established conversion processes such as visbreaking and thermal cracking can enjoy a renaissance if demand for distillates remains strong. Mild hydrocracking and distillate dewaxing which are more recent developments in refinery processing can also figure prominently in plans for incremental production of middle distillates.

  8. Petroleum Supply Monthly

    SciTech Connect

    1996-02-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  9. Petroleum supply monthly

    SciTech Connect

    1995-10-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blends, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  10. Formulation of soluble oils with synthetic and petroleum sulfonates

    SciTech Connect

    Eckard, A.; Riff, I.; Weaver, J.

    1997-06-01

    Metalworking fluids for metal removal are formulated to provide cooling, lubrication, and rust protection when cutting and machining metals. There are basically four types of cutting fluids: straight oils, synthetics, semisynthetic fluids and soluble oils. The last type is the most widely used for metal removal operations such as cutting, drilling and grinding. Soluble oils used for metalworking operations are normally the oil-in-water type, with oil as the internal phase and water as the external phase. The soluble oils can have rather complex compositions, usually containing two or more emulsifiers and coupling agents, as well as additives to provide rust inhibition, lubricity, detergency, resistance to bacterial attack and foam control. The dominant emulsifier in a soluble oil is usually sodium sulfonate which also has the secondary benefit of being a rust inhibitor. Soluble oil emulsions based on petroleum or synthetic sulfonates have been found to improve lubrication and cleaning of metal parts and equipment. As has been done previously, a series of emulsification studies were conducted using petroleum and synthetic sulfonates. Emulsifier level, coemulsifiers and minor formulation adjustments were made to optimize each system. This study was made using naphthenic oil basestock. Formulations were evaluated using criteria including concentrate stability, hard and soft water emulsion stability, emulsibility, foaming tendency and response to defoamers, antirust properties and cost effectiveness of individual formulations. The results of these evaluations are presented in the present paper.

  11. Distillation process using microchannel technology

    DOEpatents

    Tonkovich, Anna Lee; Simmons, Wayne W.; Silva, Laura J.; Qiu, Dongming; Perry, Steven T.; Yuschak, Thomas; Hickey, Thomas P.; Arora, Ravi; Smith, Amanda; Litt, Robert Dwayne; Neagle, Paul

    2009-11-03

    The disclosed invention relates to a distillation process for separating two or more components having different volatilities from a liquid mixture containing the components. The process employs microchannel technology for effecting the distillation and is particularly suitable for conducting difficult separations, such as the separation of ethane from ethylene, wherein the individual components are characterized by having volatilities that are very close to one another.

  12. Shell's Middle Distillate Synthesis process

    SciTech Connect

    Voetter, H.; VanDerBurgt, M.J. B.V., The Hague )

    1988-01-01

    The basis of the Shell Middle Distillate Synthesis (SMDS) process is the classic Fischer-Tropsch synthesis. For the case of middle distillate production from natural gas the procedure has been developed to commercial maturity, making use of tailored line-up for synthesis gas production and of proprietary modern catalysts in synthesis. Development work over the last years has in particular lead to improvement of the economy of the process altogether via catalyst performance, reactor sizing and syngas manufacturing line-up.

  13. Vacuum distillation of americium metal

    SciTech Connect

    Berry, J W; Knighton, J B; Nannie, C A

    1982-01-22

    High-purity americium metal has been distilled in multigram quantities from a plutonium-americium alloy. The procedure consisted of a two-stage vacuum distillation carried out at 1200/sup 0/C and 10/sup -6/ torr pressure. Four batches of americium metal were produced ranging in weight from 13.3 grams to 54.1 grams. The purity of the americium product ranged from 99.27 to 99.79%.

  14. The Application of High-Performance Liquid Chromatography to the Analysis of Petroleum Materials. Part 2. Quantitative Hydrocarbon-Type Analysis.

    DTIC Science & Technology

    Quantitative hydrocarbon type analysis of middle distillate petroleum products, with emphasis on straight-run (olefin-free) diesel fuels has been accomplished by high performance liquid chromatography using silica gel absorbents.

  15. Distillation Column Flooding Predictor

    SciTech Connect

    George E. Dzyacky

    2010-11-23

    The Flooding Predictor™ is a patented advanced control technology proven in research at the Separations Research Program, University of Texas at Austin, to increase distillation column throughput by over 6%, while also increasing energy efficiency by 10%. The research was conducted under a U. S. Department of Energy Cooperative Agreement awarded to George Dzyacky of 2ndpoint, LLC. The Flooding Predictor™ works by detecting the incipient flood point and controlling the column closer to its actual hydraulic limit than historical practices have allowed. Further, the technology uses existing column instrumentation, meaning no additional refining infrastructure is required. Refiners often push distillation columns to maximize throughput, improve separation, or simply to achieve day-to-day optimization. Attempting to achieve such operating objectives is a tricky undertaking that can result in flooding. Operators and advanced control strategies alike rely on the conventional use of delta-pressure instrumentation to approximate the column’s approach to flood. But column delta-pressure is more an inference of the column’s approach to flood than it is an actual measurement of it. As a consequence, delta pressure limits are established conservatively in order to operate in a regime where the column is never expected to flood. As a result, there is much “left on the table” when operating in such a regime, i.e. the capacity difference between controlling the column to an upper delta-pressure limit and controlling it to the actual hydraulic limit. The Flooding Predictor™, an innovative pattern recognition technology, controls columns at their actual hydraulic limit, which research shows leads to a throughput increase of over 6%. Controlling closer to the hydraulic limit also permits operation in a sweet spot of increased energy-efficiency. In this region of increased column loading, the Flooding Predictor is able to exploit the benefits of higher liquid

  16. Solar fermentation and distillation process

    SciTech Connect

    Schwartz, D.M.

    1984-06-19

    A solar fermentation process and distillation system for the manufacture of ethanol product suitable for blending with motor gasoline or as a substitute fuel for gasoline. Fermentation of starches or sugars is carried out in situ in solar collector tubes. The raw beer product emanating from the solar tubes is purified into a high quality ethanol fuel product by passing the beer product through a series of distillation columns whose internal reboil vapor is generated in whole or in substantial part through direct application of solar heat energy. The use of solar energy as heating source in the fermentation and distillation steps markedly reduces the need for external utilities such as steam and fuel to run the plant thereby greatly reducing the operating costs of the plant.

  17. Secondary co-processing of coal and petroleum naphthas

    SciTech Connect

    Moore, S.A.; Jones, M.A.; Lohring, R.

    1993-12-31

    Straight-run distillate derived from North Sea (Brent) crude oil and coal-derived distillate obtained from the 200 tpd coal liquefaction pilot plant at Bottrop, Essen (Germany) have been used to prepare light distillate refining feedstocks. Coal-derived naphtha was hydrotreated along and as a 50% blend with petroleum naphtha to reduce its nitrogen and sulphur content to levels acceptable for catalytic reformer feedstocks. The hydrotreating conditions required were similar to those used in the conventional oil refining industry. The hydrotreated coal-derived naphthas were catalytically reformed alone and as blends with petroleum naphtha. The coal-derived naphthas reformed very readily to high octane blendstocks at conditions markedly less severe than those necessary for the petroleum naphtha. As would be expected, the conditions required to reform blends were intermediate between those of the end members. However, the results indicate potential yield advantages when co-reforming blends as compared with reforming the end members separately and blending the products.

  18. Solar power water distillation unit

    NASA Astrophysics Data System (ADS)

    Hameed, Kamran; Muzammil Khan, Muhammad; Shahrukh Ateeq, Ijlal; Omair, Syed Muhammad; Ahmer, Muhammad; Wajid, Abdul

    2013-06-01

    Clean drinking water is the basic necessity for every human being, but about 1.1 billion people in the world lacked proper drinking water. There are many different types of water purification processes such as filtration, reverse osmosis, ultraviolet radiation, carbon absorption, but the most reliable processes are distillation and boiling. Water purification, such as distillation, is especially important in regions where water resources or tap water is not suitable for ingesting without boiling or chemical treatment. In design project It treats the water by combining different methods such as Filtration, Distillation and a technique called concentrated solar power (CSP). Distillation is literally the method seen in nature, whereby: the sun heats the water on the earth's surface, the water is turned into a vapor (evaporation) and rises, leaving contaminants behind, to form clouds. As the upper atmosphere drops in temperature the vapors cool and convert back to water to form water. In this project distillation is achieved by using a parabolic mirror which boils water at high temperature. Filtration is done by sand filter and carbon filter. First sand filter catches the sand particles and the carbon filter which has granules of active carbon is used to remove odor dissolved gases from water. This is the Pre-treatment of water. The filtered water is then collected in a water container at a focus of parabolic mirror where distillation process is done. Another important feature of designed project is the solar tracking of a parabolic mirror which increases the efficiency of a parabolic mirror [1],[2].

  19. Characterization of coal- and petroleum-derived binder pitches and the interaction of pitch/coke mixtures in pre-baked carbon anodes

    NASA Astrophysics Data System (ADS)

    Suriyapraphadilok, Uthaiporn

    Carbon anodes are manufactured from calcined petroleum coke (i.e. sponge coke) and recycled anode butts as fillers, and coal tar pitch (SCTP) as the binder. During the manufacturing of carbon anodes, coal tar pitch is mixed with calcined petroleum coke. The mix of binder, filler and some additives is heated to about 50°C above the softening point of the pitch, typically 160°C. This temperature is sufficient to enable the pitch to wet the coke particles. The mix is then either extruded, vibrated, or pressed to form a green anode. The binding between coke and pitch is very important to the anode properties. There are different binder pitches used in this work, which were standard coal tar pitch (SCTP-2), petroleum pitch (PP-1), gasification pitch (GP-115), coal-extract pitch (WVU-5), and co-coking pitches (HTCCP and OXCCP). Petroleum pitch is a residue produced from heat-treatment and distillation of petroleum fractions. Production of coal-extract pitch involves a prehydrogenation of coal followed by extraction using a dipolar solvent. Gasification pitches are distilled by-product tars produced from the coal gasification process. Co-coking pitch was developed in this work and was obtained from the liquid distillate of co-coking process of coal and heavy petroleum residue. Understanding of composition and structures of pitches from different sources and processes would lead to greater understanding of the binding properties of pitch in carbon anodes and was one of the main focuses in this study. Characterization of pitches by using different techniques including gas chromatography/mass spectrometry (GC/MS), high performance liquid chromatography (HPLC), matrix-assisted laser desorption ionization/mass spectrometry (MALDI/MS), 1H and 13C solution-state nuclear magnetic resonance (NMR), and 13C solid-state NMR yield important chemistry and structural information. The binding, or in other words the interactions in the pitch/coke mixture, is another interest in this

  20. Bakery product from distiller's grain

    SciTech Connect

    Reddy, J.A.; Stoker, R.

    1993-07-06

    A method is described for preparing a bran from a solid fermentation wet distiller's grain (WDG) or distiller's dried grain with solubles (DDGS), which consisting essentially of: adding sodium bicarbonate at about 0.05-5 weight percent, amino acid at about 0.05-5 weight percent and potato starch at about 10-50 weight percent in the form of additives to WDG or DDGS; blending the WDG/DDGS-additive mix; and drying the blended mix to form a bran suitable for use in products for human consumption.

  1. Solar distillation of sea water

    SciTech Connect

    Subramanyam, S. )

    1989-01-01

    Indian coastal and fishing villages suffer from scarcity of potable water. Solar distillation could provide a solution to this problem by adopting the following criteria: (1) Integration of distillation and storage systems with the house design. (2) Public supply of sea water and a public drain pipe system to periodically drain away the concentrated brine. (3) Harvest and store rain water to tide over cloudy rainy periods. In India there has been a thrust towards centralized non-conventional energy systems. Decentralized non-conventional energy devices and centralized service support units may offer a better solution. 1 fig.

  2. Extended testing of compression distillation.

    NASA Technical Reports Server (NTRS)

    Bambenek, R. A.; Nuccio, P. P.

    1972-01-01

    During the past eight years, the NASA Manned Spacecraft Center has supported the development of an integrated water and waste management system which includes the compression distillation process for recovering useable water from urine, urinal flush water, humidity condensate, commode flush water, and concentrated wash water. This paper describes the design of the compression distillation unit, developed for this system, and the testing performed to demonstrate its reliability and performance. In addition, this paper summarizes the work performed on pretreatment and post-treatment processes, to assure the recovery of sterile potable water from urine and treated urinal flush water.

  3. Petroleum: An Energy Profile 1999

    EIA Publications

    1999-01-01

    Explains in layman's terms the major components and operations of the U.S. petroleum industry that include: petroleum products, resources and reserves, drilling and exploration, refining, storage and transportation, imports, exports, and petroleum marketing.

  4. Petroleum 1996: Issues and Trends

    EIA Publications

    1997-01-01

    Examines historical trends and focuses on major petroleum issues and the events they represent. It analyzes different dimensions of the petroleum industry and related markets in terms of how they relate to the volatility in petroleum markets.

  5. Biodegradation of naphthenic acids in oils sands process waters in an immobilized soil/sediment bioreactor.

    PubMed

    McKenzie, Natalie; Yue, Siqing; Liu, Xudong; Ramsay, Bruce A; Ramsay, Juliana A

    2014-08-01

    Aqueous extraction of bitumen in the Alberta oil sands industry produces large volumes of oil sands process water (OSPW) containing naphthenic acids (NAs), a complex mixture of carboxylic acids that are acutely toxic to aquatic organisms. Although aerobic biodegradation reduces NA concentrations and OSPW toxicity, treatment times are long, however, immobilized cell reactors have the potential to improve NA removal rates. In this study, two immobilized soil/sediment bioreactors (ISBRs) operating in series were evaluated for treatment of NAs in OSPW. A biofilm was established from microorganisms associated with sediment particles from an OSPW contaminated wetland on a non-woven textile. At 16 months of continuous operation with OSPW as the sole source of carbon and energy, 38±7% NA removal was consistently achieved at a residence time of 160 h at a removal rate of 2.32 mg NAs L(-1)d(-1). The change in NA profile measured by gas chromatography-mass spectrometry indicated that biodegradability decreased with increasing cyclicity. These results indicate that such treatment can significantly reduce NA removal rates compared to most studies, and the treatment of native process water in a bioreactor has been demonstrated. Amplification of bacterial 16S rRNA genes and sequencing using Ion Torrent sequencing characterized the reactors' biofilm populations and found as many as 235 and 198 distinct genera in the first and second bioreactor, respectively, with significant populations of ammonium- and nitrite-oxidizers.

  6. Limitation of fluorescence spectrophotometry in the measurement of naphthenic acids in oil sands process water.

    PubMed

    Lu, Weibing; Ewanchuk, Andrea; Perez-Estrada, Leonidas; Sego, Dave; Ulrich, Ania

    2013-01-01

    Fluorescence spectrophotometry has been proposed as a quick screening technique for the measurement of naphthenic acids (NAs). To evaluate the feasibility of this application, the fluorescence emission spectra of NAs extracted from three oil sands process water sources were compared with that of commercial NAs. The NAs resulting from the bitumen extraction process cannot be differentiated because of the similarity of the fluorescence spectra. Separation of the fluorescent species in NAs using high performance liquid chromatography with fluorescence detector proved unsuccessful. The acidic fraction of NAs is fluorescent but the basic fraction of NAs is not fluorescent, implying that aromatic acids in NAs give rise to the fluorescent signals. The concentrations of NAs in oil sands process water were measured by Fourier transform infrared spectroscopy (FTIR), fluorescence spectrophotometry and ultra high performance liquid chromatography-time of flight/mass spectrometry (UPLC-TOF/MS). Commercial Merichem and Kodak NAs are the best standards to use when measuring NAs concentration with FTIR and fluorescence spectrophotometry. In addition, the NAs concentrations measured by fluorescence spectrophotometry are about 30 times higher than those measured by FTIR and UPLC-TOF/MS. The findings in this study underscore the limitation of fluorescence spectrophotometry in the measurement of NAs.

  7. Oil sands naphthenic acids: a review of properties, measurement, and treatment.

    PubMed

    Brown, Lisa D; Ulrich, Ania C

    2015-05-01

    The Alberta oil sands contain one of the world's largest reserves of oil - over 169 billion barrels of bitumen are economically recoverable with current extraction technologies. Surface mining and subsequent hot water extraction of bitumen from the ore generates about nine cubic meters of raw tailings per cubic meter of oil. Oil sands facilities are required to operate under a policy of zero water discharge, resulting in ponds containing more than one billion cubic meters of tailings, a mixture of sand, fines and process-affected water. Process-affected water contains numerous organic compounds, including naphthenic acids (NAs), which have been identified as the primary source of acute toxicity of process-affected water. Developments in analytical techniques, aerobic biodegradability, and treatment via chemical oxidation (ozone) of NAs are reviewed. The field continues to be challenged by the lack of a cost-effective, accurate analytical technique for NAs or an understanding of all the organic constituents in process-affected water that may be contributing to observed toxicity and thus requiring treatment.

  8. Harnessing oil sands microbial communities for use in ex situ naphthenic acid bioremediation.

    PubMed

    Demeter, Marc A; Lemire, Joe; George, Iain; Yue, Gordon; Ceri, Howard; Turner, Raymond J

    2014-02-01

    The caustic hot water extraction process used to release bitumen from the Alberta oil sands generates large volumes of tailings waste, or oil sands process water (OSPW). OSPW contains several components of environmental concern including diluents, polyaromatic hydrocarbons, heavy metals, and naphthenic acids (NAs); the latter are of particular concern as they are acutely toxic to aquatic organisms and mammals. Studies have demonstrated that the naturally occurring OSPW bacteria are capable of metabolizing the NAs. However, this in situ process takes place over hundreds of years, and is incomplete, leaving a recalcitrant fraction of NAs intact. In this study we explore options for recovering and harnessing the naturally occurring OSPW bacteria for potential future use in an aerobic ex situ OSPW treatment system. Here we evaluate our recovered microbes on their ability to degrade two model NAs, cyclohexane carboxylic acid and cyclohexane acetic acid. Using OSPW as a source for a bacterial inoculum, we were able to compare single and multispecies OSPW cultures, grown as either a biofilm, or as a planktonic suspension. Furthermore, we examined the effect of available nutrients on the ability of these cultures to degrade NAs. All biofilms were grown using the Calgary Biofilm Device. GC-MS, and GC-FID reveal that multispecies biofilm and planktonic cultures are each capable of degrading both NAs; a trait not observed for single species cultures. Moreover, complementary carbon sources have a tangible effect on the ability of the cultures to initiate the degradation of the NAs.

  9. Analysis of 'ARN' naphthenic acids by high temperature gas chromatography and high performance liquid chromatography.

    PubMed

    Smith, Ben E; Sutton, Paul A; Lewis, C Anthony; Dunsmore, Braden; Fowler, Geoffrey; Krane, Jostein; Lutnaes, Bjart F; Brandal, Øystein; Sjöblom, Johan; Rowland, Steven J

    2007-02-01

    Examination by high temperature GC (HTGC) of the methyl esters of the so-called 'ARN' naphthenic acids from crude oils of North Sea UK, Norwegian Sea and West African oilfields revealed the distributions of resolved 4-8 ring C80 tetra acids and trace amounts of other acids. Whilst all three oils contained apparently the same major acids, the proportions of each differed, possibly reflecting the growth temperatures of the archaebacteria from which the acids are assumed to have originated. The structures of the 4, 5, 7 and 8 ring acids are tentatively assigned by comparison with the known 6 ring acid and related natural products and an HPLC method for the isolation of the individual acids is described. ESI-MS of individual acids isolated by preparative HPLC established the elution order of the 4-8 ring acids on the HPLC and HTGC systems and revealed the presence of previously unreported acids tentatively identified as C81 and C82 7 and 8 ring analogues.

  10. Quantitative and qualitative analysis of naphthenic acids in natural waters surrounding the Canadian oil sands industry.

    PubMed

    Ross, Matthew S; Pereira, Alberto dos Santos; Fennell, Jon; Davies, Martin; Johnson, James; Sliva, Lucie; Martin, Jonathan W

    2012-12-04

    The Canadian oil sands industry stores toxic oil sands process-affected water (OSPW) in large tailings ponds adjacent to the Athabasca River or its tributaries, raising concerns over potential seepage. Naphthenic acids (NAs; C(n)H(2n-Z)O(2)) are toxic components of OSPW, but are also natural components of bitumen and regional groundwaters, and may enter surface waters through anthropogenic or natural sources. This study used a selective high-resolution mass spectrometry method to examine total NA concentrations and NA profiles in OSPW (n = 2), Athabasca River pore water (n = 6, representing groundwater contributions) and surface waters (n = 58) from the Lower Athabasca Region. NA concentrations in surface water (< 2-80.8 μg/L) were 100-fold lower than previously estimated. Principal components analysis (PCA) distinguished sample types based on NA profile, and correlations to water quality variables identified two sources of NAs: natural fatty acids, and bitumen-derived NAs. Analysis of NA data with water quality variables highlighted two tributaries to the Athabasca River-Beaver River and McLean Creek-as possibly receiving OSPW seepage. This study is the first comprehensive analysis of NA profiles in surface waters of the region, and demonstrates the need for highly selective analytical methods for source identification and in monitoring for potential effects of development on ambient water quality.

  11. Toxicological assessment of refined naphthenic acids in a repeated dose/developmental toxicity screening test.

    PubMed

    McKee, Richard H; North, Colin M; Podhasky, Paula; Charlap, Jeffrey H; Kuhl, Adam

    2014-01-01

    Naphthenic acids (NAs) are primarily cycloaliphatic carboxylic acids with 10 to 16 carbons. To characterize the potential of refined NAs (>70% purity) to cause reproductive and/or developmental effects, Sprague-Dawley rats (12/group) were given oral doses of 100, 300, or 900 mg/kg/d, beginning 14 days prior to mating, then an additional 14 days for males or through lactation day 3 for females (up to 53 days) in a repeated dose/reproductive toxicity test (Organization for Economic Cooperation and Development [OECD] 422). Potential mutagenic effects were assessed using Salmonella (OECD 471) and in in vivo micronucleus tests (OECD 474) using bone marrow taken from treated animals in the screening study described previously. Systemic effects included reduced terminal body weights, increased liver weights, and changes in a number of blood cell parameters. The overall no effect level for all target organ effects was 100 mg/kg/d. In the reproductive/developmental toxicity assessment, there were significant reductions in numbers of live born offspring in groups exposed to 300 and 900 mg/kg/d. The overall no effect level for developmental effects was 100 mg/kg/d. The data from the Salmonella and micronucleus tests provide evidence that refined NAs are not genotoxic.

  12. Fundamentals of Petroleum.

    ERIC Educational Resources Information Center

    Bureau of Naval Personnel, Washington, DC.

    Basic information on petroleum is presented in this book prepared for naval logistics officers. Petroleum in national defense is discussed in connection with consumption statistics, productive capacity, world's resources, and steps in logistics. Chemical and geological analyses are made in efforts to familiarize methods of refining, measuring,…

  13. Geostatistics and petroleum geology

    SciTech Connect

    Hohn, M.E.

    1988-01-01

    The book reviewed is designed as a practical guide to geostatistics or kriging for the petroleum geologists. The author's aim in the book is to explain geostatistics as a working tool for petroleum geologists through extensive use of case-study material mostly drawn from his own research in gas potential evaluation in West Virginia. Theory and mathematics are pared down to immediate needs.

  14. Petroleum supply monthly, April 1994

    SciTech Connect

    Not Available

    1994-04-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographical regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US.

  15. World petroleum supplies

    NASA Astrophysics Data System (ADS)

    Bell, Peter M.

    A number of conclusions by political conservatives about the fate of world petroleum supplies have been emerging lately. Among the most recent of them arose from discussions, held at the 1983 spring meeting of the American Association for the Advancement of Science (AAAS), which focused on the environment and resource study entitled “The Global 2000 Report” (New Scientist, June 9, 1983). Fred Singer, representing the Heritage Foundation of Washington, D.C., criticized the report, which predicted shortages in the near future, saying that the current world-wide oil glut will continue beyond the year 2000. Alternatives to the use of petroleum are a part of the cause. Singer argued that conservation, nuclear energy, and other petroleum substitutes will continue to suppress the demand for petroleum. In addition, according to other evaluations, exploration for petroleum and natural gas has not really begun.

  16. Corrosion inhibition for distillation apparatus

    DOEpatents

    Baumert, Kenneth L.; Sagues, Alberto A.; Davis, Burtron H.; Schweighardt, Frank K.

    1985-01-01

    Tower material corrosion in an atmospheric or sub-atmospheric distillation tower in a coal liquefaction process is reduced or eliminated by subjecting chloride-containing tray contents to an appropriate ion-exchange resin to remove chloride from such tray contents materials.

  17. Purifying Aluminum by Vacuum Distillation

    NASA Technical Reports Server (NTRS)

    Du Fresne, E. R.

    1985-01-01

    Proposed method for purifying aluminum employs one-step vacuum distillation. Raw material for process impure aluminum produced in electrolysis of aluminum ore. Impure metal melted in vacuum. Since aluminum has much higher vapor pressure than other constituents, boils off and condenses on nearby cold surfaces in proportions much greater than those of other constituents.

  18. Entanglement preservation by continuous distillation

    SciTech Connect

    Mundarain, D.; Orszag, M.

    2009-05-15

    We study the two-qubit entanglement preservation for a system in the presence of independent thermal baths. We use a combination of filtering operations and distillation protocols as a series of frequent measurements on the system. It is shown that a small fraction of the total amount of available copies of the system preserves or even improves its initial entanglement during the evolution.

  19. Plant transpiration distillation of water

    SciTech Connect

    Virostko, M.K.; Spielberg, J.I.

    1986-01-01

    A project using solar energy and the transpiration of plants for the distillation of water is described. Along with determining which of three plants thrived best growing in a still, the experiment also revealed that the still functioned nearly as well in inclement weather as in fair weather.

  20. Environmental hazard and risk characterisation of petroleum substances: a guided "walking tour" of petroleum hydrocarbons.

    PubMed

    Bierkens, Johan; Geerts, Lieve

    2014-05-01

    Petroleum substances are used in large quantities, primarily as fuels. They are complex mixtures whose major constituents are hydrocarbons derived from crude oil by distillation and fractionation. Determining the complete molecular composition of petroleum and its refined products is not feasible with current analytical techniques because of the huge number of molecular components. This complex nature of petroleum products, with their varied number of constituents, all of them exhibiting different fate and effect characteristics, merits a dedicated hazard and risk assessment approach. From a regulatory perspective they pose a great challenge in a number of REACH processes, in particular in the context of dossier and substance evaluation but also for priority setting activities. In order to facilitate the performance of hazard and risk assessment for petroleum substances the European oil company association, CONCAWE, has developed the PETROTOX and PETRORISK spreadsheet models. Since the exact composition of many petroleum products is not known, an underlying assumption of the PETROTOX and PETRORISK tools is that the behaviour and fate of a total petroleum substance can be simulated based on the physical-chemical properties of representative structures mapped to hydrocarbon blocks (HBs) and on the relative share of each HB in the total mass of the product. To assess how differing chemical compositions affect the simulated chemical fate and toxicity of hydrocarbon mixtures, a series of model simulations were run using an artificial petroleum substance, containing 386 (PETROTOX) or 160 (PETRORISK) HBs belonging to different chemical classes and molecular weight ranges, but with equal mass assigned to each of them. To this artificial petroleum substance a guided series of subsequent modifications in mass allocation to a delineated number of HBs belonging to different chemical classes and carbon ranges was performed, in what we perceived as a guided "walking tour

  1. 27 CFR 19.301 - Distillation.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Distillation. 19.301 Section 19.301 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... of Spirits § 19.301 Distillation. The distillation of spirits must be done in a continuous...

  2. 27 CFR 19.301 - Distillation.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Distillation. 19.301 Section 19.301 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... of Spirits § 19.301 Distillation. The distillation of spirits must be done in a continuous...

  3. 27 CFR 19.316 - Distillation.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Distillation. 19.316 Section 19.316 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Production § 19.316 Distillation. The...

  4. 27 CFR 19.301 - Distillation.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Distillation. 19.301 Section 19.301 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... of Spirits § 19.301 Distillation. The distillation of spirits must be done in a continuous...

  5. 27 CFR 19.301 - Distillation.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Distillation. 19.301 Section 19.301 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... of Spirits § 19.301 Distillation. The distillation of spirits must be done in a continuous...

  6. 27 CFR 24.216 - Distilling material.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Distilling material. 24..., DEPARTMENT OF THE TREASURY LIQUORS WINE Production of Other Than Standard Wine § 24.216 Distilling material... fruit residues, for use as distilling material, using any quantity of water desired to...

  7. 27 CFR 24.216 - Distilling material.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Distilling material. 24..., DEPARTMENT OF THE TREASURY ALCOHOL WINE Production of Other Than Standard Wine § 24.216 Distilling material... fruit residues, for use as distilling material, using any quantity of water desired to...

  8. Cascade Distillation Subsystem Development: Progress Toward a Distillation Comparison Test

    NASA Technical Reports Server (NTRS)

    Callahan, M. R.; Lubman, A.; Pickering, Karen D.

    2009-01-01

    Recovery of potable water from wastewater is essential for the success of long-duration manned missions to the Moon and Mars. Honeywell International and a team from NASA Johnson Space Center (JSC) are developing a wastewater processing subsystem that is based on centrifugal vacuum distillation. The wastewater processor, referred to as the Cascade Distillation Subsystem (CDS), utilizes an innovative and efficient multistage thermodynamic process to produce purified water. The rotary centrifugal design of the system also provides gas/liquid phase separation and liquid transport under microgravity conditions. A five-stage subsystem unit has been designed, built, delivered and integrated into the NASA JSC Advanced Water Recovery Systems Development Facility for performance testing. A major test objective of the project is to demonstrate the advancement of the CDS technology from the breadboard level to a subsystem level unit. An initial round of CDS performance testing was completed in fiscal year (FY) 2008. Based on FY08 testing, the system is now in development to support an Exploration Life Support (ELS) Project distillation comparison test expected to begin in early 2009. As part of the project objectives planned for FY09, the system will be reconfigured to support the ELS comparison test. The CDS will then be challenged with a series of human-gene-rated waste streams representative of those anticipated for a lunar outpost. This paper provides a description of the CDS technology, a status of the current project activities, and data on the system s performance to date.

  9. New Design Methods And Algorithms For High Energy-Efficient And Low-cost Distillation Processes

    SciTech Connect

    Agrawal, Rakesh

    2013-11-21

    This project sought and successfully answered two big challenges facing the creation of low-energy, cost-effective, zeotropic multi-component distillation processes: first, identification of an efficient search space that includes all the useful distillation configurations and no undesired configurations; second, development of an algorithm to search the space efficiently and generate an array of low-energy options for industrial multi-component mixtures. Such mixtures are found in large-scale chemical and petroleum plants. Commercialization of our results was addressed by building a user interface allowing practical application of our methods for industrial problems by anyone with basic knowledge of distillation for a given problem. We also provided our algorithm to a major U.S. Chemical Company for use by the practitioners. The successful execution of this program has provided methods and algorithms at the disposal of process engineers to readily generate low-energy solutions for a large class of multicomponent distillation problems in a typical chemical and petrochemical plant. In a petrochemical complex, the distillation trains within crude oil processing, hydrotreating units containing alkylation, isomerization, reformer, LPG (liquefied petroleum gas) and NGL (natural gas liquids) processing units can benefit from our results. Effluents from naphtha crackers and ethane-propane crackers typically contain mixtures of methane, ethylene, ethane, propylene, propane, butane and heavier hydrocarbons. We have shown that our systematic search method with a more complete search space, along with the optimization algorithm, has a potential to yield low-energy distillation configurations for all such applications with energy savings up to 50%.

  10. Salting-out effects on the characterization of naphthenic acids from Athabasca oil sands using electrospray ionization.

    PubMed

    Headley, John V; Barrow, Mark P; Peru, Kerry M; Derrick, Peter J

    2011-01-01

    There is growing interest in the mass spectrometric characterization of oil sands acids present in natural waters and contaminated soils. This interest stems from efforts to isolate the principal toxic components of oil sands acid extractable organics in aquatic environment. Salting-out effects are demonstrated for nanospray ionization mass spectra of Athabasca oil sands acid extractable organics (naphthenic acids), using Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry. The differences in spectra obtained for the sodium naphthenates in dichloromethane/acetonitrile cosolvents compared to spectra obtained in the absence of saturated sodium chloride salts, are used here as a surrogate to indicate the more bioavailable or toxic components in natural waters. Whereas, monocarboxylic compounds (C(n)H(2n+Z)O(2)) were prevalent in the Z =-4, -6, and -12 (2, 3 and 6-ring naphthenic acids respectively) family in the carbon number range of 13 to 19 in the dichloromethane/acetonitrile cosolvent systems, salting-out effects resulted in a general enhancement of Z =-4 species, relative to others. Likewise, the shift in relative intensities of species containing O(1), O(3), O(4), O(2)S and O(3)S was dramatic for systems with and without saturated salts present. The O(4) and O(3)S species for example, were prevalent in the dichloromethane/acetonitrile cosolvent but were non-detected in the presence of saturated salts. Interactions of oil sands acids with salts are expected to occur in oil sands processed waters and natural saline waters. As evident by the distribution of species observed, salting-out effects will play a major role in limiting the bioavailability of oil sands acids in aquatic systems.

  11. Embryonic exposure to model naphthenic acids delays growth and hatching in the pond snail Lymnaea stagnalis.

    PubMed

    Johnston, Christina U; Clothier, Lindsay N; Quesnel, Dean M; Gieg, Lisa M; Chua, Gordon; Hermann, Petra M; Wildering, Willem C

    2017-02-01

    Naphthenic acids (NAs), a class of structurally diverse carboxylic acids with often complex ring structures and large aliphatic tail groups, are important by-products of many petrochemical processes including the oil sands mining activity of Northern Alberta. While it is evident that NAs have both acute and chronic harmful effects on many organisms, many aspects of their toxicity remain to be clarified. Particularly, while substantive data sets have been collected on NA toxicity in aquatic prokaryote and vertebrate model systems, to date, nothing is known about the toxic effects of these compounds on the embryonic development of aquatic invertebrate taxa, including freshwater mollusks. This study examines under laboratory conditions the toxicity of NAs extracted from oil sands process water (OSPW) and the low-molecular weight model NAs cyclohexylsuccinic acid (CHSA), cyclohexanebutyric acid (CHBA), and 4-tert-butylcyclohexane carboxylic acid (4-TBCA) on embryonic development of the snail Lymnaea stagnalis, a common freshwater gastropod with a broad Palearctic distribution. Evidence is provided for concentration-dependent teratogenic effects of both OSPW-derived and model NAs with remarkably similar nominal threshold concentrations between 15 and 20 mg/L and 28d EC50 of 31 mg/L. In addition, the data provide evidence for substantial toxicokinetic differences between CHSA, CHBA and 4-TBCA. Together, our study introduces Lymnaea stagnalis embryonic development as an effective model to assay NA-toxicity and identifies molecular architecture as a potentially important toxicokinetic parameter in the toxicity of low-molecular weight NA in embryonic development of aquatic gastropods.

  12. Differences in phytotoxicity and dissipation between ionized and nonionized oil sands naphthenic acids in wetland plants.

    PubMed

    Armstrong, Sarah A; Headley, John V; Peru, Kerry M; Germida, James J

    2009-10-01

    Naphthenic acids (NAs) are composed of alkyl-substituted acyclic and cycloaliphatic carboxylic acids and, because they are acutely toxic to fish, are of toxicological concern. During the caustic hot-water extraction of oil from the bitumen in oil sands deposits, NAs become concentrated in the resulting tailings pond water. The present study investigated if dissipation of NAs occurs in the presence of hydroponically grown emergent macrophytes (Typha latifolia, Phragmites australis, and Scirpus acutus) to determine the potential for phytoremediation of these compounds. Plants were grown with oil sands NAs (pKa approximately 5-6) in medium at pH 7.8 (predominantly ionized NAs) and pH 5.0 (predominantly nonionized NAs) to determine if, by altering their chemical form, NAs may be more accessible to plants and, thus, undergo increased dissipation. Whereas the oil sands NA mixture in its nonionized form was more toxic to wetland plants than its ionized form, neither form appeared to be sequestered by wetland plants. The present study demonstrated that plants may selectively enhance the dissipation of individual nonionized NA compounds, which contributes to toxicity reduction but does not translate into detectable total NA dissipation within experimental error and natural variation. Plants were able to reduce the toxicity of a NA system over 30 d, increasing the median lethal concentration (LC50; % of hydroponic solution) of the medium for Daphnia magna by 23.3% +/- 8.1% (mean +/- standard error; nonionized NAs) and 37.0% +/- 2.7% (ionized NAs) as determined by acute toxicity bioassays. This reduction in toxicity was 7.3% +/- 2.6% (nonionized NAs) and 45.0% +/- 6.8% (ionized NAs) greater than that in unplanted systems.

  13. Competitive Adsorption of Naphthenic Acids and Polyaromatic Molecules at a Toluene-Water Interface.

    PubMed

    Teklebrhan, Robel B; Jian, Cuiying; Choi, Phillip; Xu, Zhenghe; Sjöblom, Johan

    2016-12-22

    The early-stage competitive co-adsorption of interfacially active naphthenic acids (NAs) and polyaromatic (PA) molecules to a toluene-water interface from the bulk toluene phase was studied using molecular dynamics (MD) simulation. The NA molecules studied had the same polar functional group but different cycloaliphatic nonpolar tails, and a perylene bisimide (PBI)-based molecule was used as a representative PA compound. The results from our simulations suggest that the size and structural features of NA molecules greatly influence the interfacial activity of PA molecules and partitioning of NA molecules at the toluene-water interface. At low concentrations of PA (∼2.3 wt %) and NA (∼0.4 wt %) molecules, NA molecules containing large cycloaliphatic rings (e.g., four rings) or with a very long aliphatic tail (e.g., carbon chain length of 14) were observed to impede the migration of PA molecules to the interface, whereas small NA molecules containing two cycloaliphatic rings had little effect on the adsorption of PA molecules at the toluene-water interface. At high NA concentrations, the adsorption of PA molecules (∼5.75-17.25 wt %) was greatly hindered by the presence of small NA molecules (∼1.6-4.8 wt %) due to the solvation of PA nanoaggregates in the bulk. Adsorption mechanisms of PA and NA molecules at toluene-water interfaces were clarified through a detailed analysis on the interactions among different species in the system. The results obtained from this work provide insights into designing appropriate chemical demulsifiers or co-demulsifiers for breaking water-in-oil emulsions of great industrial applications.

  14. Petroleum supply monthly, February 1994

    SciTech Connect

    Not Available

    1994-03-01

    The Petroleum Supply Monthly presents data describing the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders; operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Data are divided into two sections: Summary statistics and Detailed statistics.

  15. Petroleum supply monthly, January 1994

    SciTech Connect

    Not Available

    1994-01-01

    Data presented describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  16. Assisted Distillation of Quantum Coherence

    NASA Astrophysics Data System (ADS)

    Chitambar, E.; Streltsov, A.; Rana, S.; Bera, M. N.; Adesso, G.; Lewenstein, M.

    2016-02-01

    We introduce and study the task of assisted coherence distillation. This task arises naturally in bipartite systems where both parties work together to generate the maximal possible coherence on one of the subsystems. Only incoherent operations are allowed on the target system, while general local quantum operations are permitted on the other; this is an operational paradigm that we call local quantum-incoherent operations and classical communication. We show that the asymptotic rate of assisted coherence distillation for pure states is equal to the coherence of assistance, an analog of the entanglement of assistance, whose properties we characterize. Our findings imply a novel interpretation of the von Neumann entropy: it quantifies the maximum amount of extra quantum coherence a system can gain when receiving assistance from a collaborative party. Our results are generalized to coherence localization in a multipartite setting and possible applications are discussed.

  17. Petroleum supply monthly, August 1993

    SciTech Connect

    Not Available

    1993-09-01

    This publication the Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report, (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Data presented are divided into Summary Statistics and Detailed Statistics.

  18. Carbonate petroleum reservoirs

    SciTech Connect

    Roehl, P.O.; Choquette, P.W.

    1985-01-01

    This book presents papers on the geology of petroleum deposits. Topics considered include diagenesis, porosity, dolomite reservoirs, deposition, reservoir rock, reefs, morphology, fracture-controlled production, Cenozoic reservoirs, Mesozoic reservoirs, and Paleozoic reservoirs.

  19. Petroleum Vapor Intrusion

    EPA Pesticide Factsheets

    One type of vapor intrusion is PVI, in which vapors from petroleum hydrocarbons such as gasoline, diesel, or jet fuel enter a building. Intrusion of contaminant vapors into indoor spaces is of concern.

  20. NAFTA opportunities: Petroleum refining

    SciTech Connect

    Not Available

    1993-01-01

    The North American Free Trade Agreement (NAFTA) creates a more transparent environment for the sale of refined petroleum products to Mexico, and locks in access to Canada's relatively open market for these products. Canada and Mexico are sizable United States export markets for refined petroleum products, with exports of $556 million and $864 million, respectively, in 1992. These markets represent approximately 24 percent of total U.S. exports of these goods.

  1. Fundamentals of petroleum maps

    SciTech Connect

    Mc Elroy, D.P.

    1986-01-01

    It's a complete guide to the fundamentals of reading, using, and making petroleum maps. The topics covered are well spotting, lease posting, contouring, hanging cross sections, and ink drafting. This book not only tells the how of petroleum mapping, but it also tells the why to better understand the principles and techniques. The books does not teach ''drafting,'' but does describe the proper care and use of drafting equipment for those who are totally new to the task.

  2. 1991 international petroleum encyclopedia

    SciTech Connect

    Not Available

    1991-01-01

    There is no other petroleum industry publication quite like the International Petroleum Encyclopedia. With a timely, accurate combination of global industry coverage and analysis, detailed statistical surveys, cutting-edge reports on technological advancements and the ever-popular atlas maps, the 1991 International Petroleum Encyclopedia is a smart buy for professionals whose business is oil and gas, as well as for those whose business is affected by the industry's trends and developments. Written by a professional staff of Oil and Gas Journal petroleum experts, the 1991 IPE gives you the all important global perspective for constructing sound business strategies for the 90's. The petroleum industry is scrambling for information that will help it survive this volitile period. This book reports on the topics in the petroleum industry the latest developments in horizontal drilling, world refining (the latest information on reformulated fuels), and predictions about the post-war Persian Gulf industry. PULS, discussions on changes in the Gulf of Mexico, developments in the LNG trade, and crude oil tanker supply/.demand curves.

  3. Determination of thermodynamic and transport parameters of naphthenic acids and organic process chemicals in oil sand tailings pond water.

    PubMed

    Wang, Xiaomeng; Robinson, Lisa; Wen, Qing; Kasperski, Kim L

    2013-07-01

    Oil sand tailings pond water contains naphthenic acids and process chemicals (e.g., alkyl sulphates, quaternary ammonium compounds, and alkylphenol ethoxylates). These chemicals are toxic and can seep through the foundation of the tailings pond to the subsurface, potentially affecting the quality of groundwater. As a result, it is important to measure the thermodynamic and transport parameters of these chemicals in order to study the transport behavior of contaminants through the foundation as well as underground. In this study, batch adsorption studies and column experiments were performed. It was found that the transport parameters of these chemicals are related to their molecular structures and other properties. The computer program (CXTFIT) was used to further evaluate the transport process in the column experiments. The results from this study show that the transport of naphthenic acids in a glass column is an equilibrium process while the transport of process chemicals seems to be a non-equilibrium process. At the end of this paper we present a real-world case study in which the transport of the contaminants through the foundation of an external tailings pond is calculated using the lab-measured data. The results show that long-term groundwater monitoring of contaminant transport at the oil sand mining site may be necessary to avoid chemicals from reaching any nearby receptors.

  4. Distributive Distillation Enabled by Microchannel Process Technology

    SciTech Connect

    Arora, Ravi

    2013-01-22

    The application of microchannel technology for distributive distillation was studied to achieve the Grand Challenge goals of 25% energy savings and 10% return on investment. In Task 1, a detailed study was conducted and two distillation systems were identified that would meet the Grand Challenge goals if the microchannel distillation technology was used. Material and heat balance calculations were performed to develop process flow sheet designs for the two distillation systems in Task 2. The process designs were focused on two methods of integrating the microchannel technology 1) Integrating microchannel distillation to an existing conventional column, 2) Microchannel distillation for new plants. A design concept for a modular microchannel distillation unit was developed in Task 3. In Task 4, Ultrasonic Additive Machining (UAM) was evaluated as a manufacturing method for microchannel distillation units. However, it was found that a significant development work would be required to develop process parameters to use UAM for commercial distillation manufacturing. Two alternate manufacturing methods were explored. Both manufacturing approaches were experimentally tested to confirm their validity. The conceptual design of the microchannel distillation unit (Task 3) was combined with the manufacturing methods developed in Task 4 and flowsheet designs in Task 2 to estimate the cost of the microchannel distillation unit and this was compared to a conventional distillation column. The best results were for a methanol-water separation unit for the use in a biodiesel facility. For this application microchannel distillation was found to be more cost effective than conventional system and capable of meeting the DOE Grand Challenge performance requirements.

  5. Early changes produced in mouse skin by the application of three middle distillates.

    PubMed

    Grasso, P; Sharratt, M; Ingram, A J

    1988-01-01

    It has been reported by the American Petroleum Institute (API) that dermal applications of certain middle distillates of mineral oils can result in high incidences of skin tumours in mice. This was unexpected as the polycyclic aromatic hydrocarbon (PAH) levels in these were below detection limits. To examine the possible role of tissue injury in the induction of tumours, the skin reactions produced by thrice weekly applications of three middle distillates similar to those tested by the API were examined grossly and histopathologically at intervals up to 6 weeks. Various reference materials and oils were used as controls. Preliminary histological examination showed that severe skin damage was present from week 1 onwards in mice treated with the three middle distillates, two of them producing epidermal loss and ulceration. Marked epidermal hyperplasia was produced by all three middle distillates. These findings support the view that regenerative epidermal hyperplasia due to repeated severe skin damage may have exerted a powerful promotional effect in the production of the skin tumours by middle distillates in the API study.

  6. 31 CFR 542.314 - Petroleum or petroleum products of Syrian origin.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Petroleum or petroleum products of... REGULATIONS General Definitions § 542.314 Petroleum or petroleum products of Syrian origin. The term petroleum or petroleum products of Syrian origin means petroleum or petroleum products of Syrian...

  7. Culturing oil sands microbes as mixed species communities enhances ex situ model naphthenic acid degradation

    PubMed Central

    Demeter, Marc A.; Lemire, Joseph A.; Yue, Gordon; Ceri, Howard; Turner, Raymond J.

    2015-01-01

    Oil sands surface mining for bitumen results in the formation of oil sands process water (OSPW), containing acutely toxic naphthenic acids (NAs). Potential exists for OSPW toxicity to be mitigated by aerobic degradation of the NAs by microorganisms indigenous to the oil sands tailings ponds, the success of which is dependent on the methods used to exploit the metabolisms of the environmental microbial community. Having hypothesized that the xenobiotic tolerant biofilm mode-of-life may represent a feasible way to harness environmental microbes for ex situ treatment of OSPW NAs, we aerobically grew OSPW microbes as single and mixed species biofilm and planktonic cultures under various conditions for the purpose of assaying their ability to tolerate and degrade NAs. The NAs evaluated were a diverse mixture of eight commercially available model compounds. Confocal microscopy confirmed the ability of mixed and single species OSPW cultures to grow as biofilms in the presence of the NAs evaluated. qPCR enumeration demonstrated that the addition of supplemental nutrients at concentrations of 1 g L-1 resulted in a more numerous population than 0.001 g L-1 supplementation by approximately 1 order of magnitude. GC-FID analysis revealed that mixed species cultures (regardless of the mode of growth) are the most effective at degrading the NAs tested. All constituent NAs evaluated were degraded below detectable limits with the exception of 1-adamantane carboxylic acid (ACA); subsequent experimentation with ACA as the sole NA also failed to exhibit degradation of this compound. Single species cultures degraded select few NA compounds. The degradation trends highlighted many structure-persistence relationships among the eight NAs tested, demonstrating the effect of side chain configuration and alkyl branching on compound recalcitrance. Of all the isolates, the Rhodococcus spp. degraded the greatest number of NA compounds, although still less than the mixed species cultures

  8. Carbonization of petroleum feedstocks

    SciTech Connect

    Eser, S.

    1987-01-01

    The properties of the petroleum cokes are determined by their crystalline structure, which principally depends on the nature of the mesophase formed during the liquid-phase carbonization of the precursors. This study was aimed at investigating the relationships between the chemical nature of the petroleum feedstocks and the mesophase development during carbonization. Ashland 240 pitch and a range of petroleum heavy residua were characterized by solvent fractionation, elemental analysis, Fourier Transform Infrared Spectroscopy, H and TC Nuclear Magnetic Resonance Spectroscopy. The semi-coke (pyridine insolubles) formation from the feedstocks and their asphaltene fractions was found to be first-order with respect to the concentration of pyridine solubles over a wide conversion range. An inverse relationship was observed between the rate of carbonization of the asphaltenes and the degree of mesophase development. The degree of mesophase development during the carbonization of the feedstock asphaltenes increased consistently with the increasing hydrogen aromaticity over the whole range of the feedstocks used. The principal conclusion from this study is that the mesophase development during carbonization critically depends on the chemical constitution of the petroleum feedstocks. The molecular nature of the asphaltene fractions determines the extent of mesophase development during the carbonization of the petroleum heavy residua. In this respect, the hydrogen aromaticity of the asphaltenes appears to be a good measure for the feedstock quality in terms of resulting coke structure and properties.

  9. Vapor Compression Distillation Flight Experiment

    NASA Technical Reports Server (NTRS)

    Hutchens, Cindy F.

    2002-01-01

    One of the major requirements associated with operating the International Space Station is the transportation -- space shuttle and Russian Progress spacecraft launches - necessary to re-supply station crews with food and water. The Vapor Compression Distillation (VCD) Flight Experiment, managed by NASA's Marshall Space Flight Center in Huntsville, Ala., is a full-scale demonstration of technology being developed to recycle crewmember urine and wastewater aboard the International Space Station and thereby reduce the amount of water that must be re-supplied. Based on results of the VCD Flight Experiment, an operational urine processor will be installed in Node 3 of the space station in 2005.

  10. Principal conversions of hydrocarbons in hydrotreating distillate lube raffinate

    SciTech Connect

    Chesnokov, A.A.; Kogan, L.O.; Kozlova, N.M.; Muchinskii, Ya.D.

    1983-01-01

    This article reports on a study of the principal conversions of hydrocarbons in hydrotreating a raffinate from phenol treating, obtained from a mixture of Volga-Ural and West Siberian crudes. It examines naphthenic hydrocarbons, alkylbenzenes, naphthalene hydrocarbons, and phenanthrenes. The degree of conversion of all groups of the aromatic hydrocarbons is considerably greater than the degree of conversion of the naphthenes. The greater the conversion of aromatics, the more significant are the changes in their physicochemical properties. Substantial decreases in the viscosity, density, and refractive index, and increases in the viscosity index are observed.

  11. Petroleum supply monthly, August 1994

    SciTech Connect

    Not Available

    1994-08-26

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  12. Petroleum supply monthly, July 1993

    SciTech Connect

    Not Available

    1993-07-29

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: Petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  13. National Standard Petroleum Oil Tables

    DTIC Science & Technology

    1936-03-04

    largely according to the recommendations of a committee appointed by the American Petroleum Institute to represent the petroleum industry. In order to... Petroleum Institute , the U. S. Bureau of Mines, and the National Bureau of Standards, in December 1921, agreed to recommend that in the future only...overcome the confusion that has existed in the petroleum-oil industry by reason of the use of two so-called Baume scales for light liquids, the American

  14. Future perspectives of using hollow fibers as structured packings in light hydrocarbon distillation

    SciTech Connect

    Yang, Dali; Orler, Bruce; Tornga, Stephanie; Welch, Cindy

    2011-01-26

    Olefin and paraffin are the largest chemical commodities. Furthermore, they are major building blocks for the petrochemical industry. Each year, petroleum refining, consumes 4,500 TBtu/yr in separation energy, making it one of the most energy-intensive industries in the United States). Just considering liquefied petroleum gas (ethane/propane/butane) and olefins (ethylene and propylene) alone, the distillation energy consumption is about 400 TBtu/yr in the US. Since petroleum distillation is a mature technology, incremental improvements in column/tray design will only provide a few percent improvements in the performance. However, each percent saving in net energy use amounts to savings of 10 TBtu/yr and reduces CO{sub 2} emissions by 0.2 MTon/yr. In practice, distillation columns require 100 to 200 trays to achieve the desired separation. The height of a transfer unit (HTU) of conventional packings is typical in the range of 36-60 inch. Since 2006, we had explored using several non-selective membranes as the structured packings to replace the conventional packing materials used in propane and propylene distillation. We obtained the lowest HTU of < 8 inch for the hollow fiber column, which was >5 times shorter than that of the conventional packing materials. In 2008, we also investigated this type of packing materials in iso-/n-butane distillation. Because of a slightly larger relative volatility of iso-/n-butane than that of propane/propylene, a wider and a more stable operational range was obtained for the iso-/n-butane pair. However, all of the experiments were conducted on a small scale with flowrate of < 25 gram/min. Recently, we demonstrated this technology on a larger scale (<250 gram/min). Within the loading range of F-factor < 2.2 Pa{sup 0.5}, a pressure drop on the vapor side is below 50 mbar/m, which suggests that the pressure drop of hollow fibers packings is not an engineering barrier for the applications in distillations. The thermal stability study

  15. Petroleum supply monthly, April 1990

    SciTech Connect

    1990-06-26

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the Petroleum Supply Monthly describe (PSM) the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply.'' Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: (1) the Summary Statistics and (2) the Detailed Statistics.

  16. Chemical Principles Revisited: Petroleum Chemistry.

    ERIC Educational Resources Information Center

    Kolb, Doris; Kolb, Kenneth E.

    1979-01-01

    Presents an historical review of the role of petroleum in world history and information on the chemistry of petroleum. It is suggested that petroleum chemistry be discussed since within the next two decades oil and gas will provide the major portion of U.S. energy. (Author/SA)

  17. Petroleum lands and leasing

    SciTech Connect

    Burk, J.

    1984-01-01

    This is a reference book for the lessor, lessee, royalty owner, PLM student and landman. Contents: A historical background; Rights of ownership; Instruments of conveyance; Who owns this land. The oil and gas lease and leasing procedures; Curing titles; Pooling and utilization; Contracts and agreements; Lease maintenance; Land measurements and descriptions; Code of ethics; American Association of Petroleum Landmen; Glossary.

  18. Petroleum-derived carbons

    SciTech Connect

    Bacha, J.D.; Newman, J.W.; White, J.L.

    1986-01-01

    This book presents the papers given at a symposium on petroleum coke. Topics considered at the symposium included mesophase formation, thermal analysis, rheology, microstructure, carbon fibers, electron microscopy, residual oil processing, synthetic aromatic pitch, delayed coking, calcination, desulfurization, graphite, metallurgical coke, carbon black, natural gas pyrolysis, liquid impregnation, and carbon-carbon composites.

  19. Non-Petroleum Oils

    EPA Pesticide Factsheets

    These include synthetics such as silicone fluids and tung oils, wood-derivative oils such as resin/rosin, animal fats/oil, and seed oils. Many have similar physical properties to petroleum-based, such as water insolubility and formation of slicks.

  20. Petroleum Vapor - Field Technical

    EPA Science Inventory

    The screening approach being developed by EPA OUST to evaluate petroleum vapor intrusion (PVI) requires information that has not be routinely collected in the past at vapor intrusion sites. What is the best way to collect this data? What are the relevant data quality issues and ...

  1. Separations of petroleum products involving supercritical fluid chromatography.

    PubMed

    Thiébaut, Didier

    2012-08-24

    This paper gives a survey of the most attractive trends and applications of supercritical fluid chromatography in the petroleum industry: simulated distillation, group-type analysis and related applications including the implementation of multidetection in a so-called "hypernated" system, as well as the hyphenation to GC×GC for improved group-type separation, SFC×GC and first promising SFC×SFC results. Some specific technical information related to the use of capillary columns or conventional packed columns in combination with FID (or detectors that require decompression and in some instances splitting of the mobile phase prior detection) is also provided.

  2. 27 CFR 24.216 - Distilling material.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... containing aldehydes may be used in the fermentation of wine to be used as distilling material. Lees, filter..., DEPARTMENT OF THE TREASURY LIQUORS WINE Production of Other Than Standard Wine § 24.216 Distilling material. Wine may be produced on bonded wine premises from grapes and other fruit, natural fruit products,...

  3. 27 CFR 24.216 - Distilling material.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... containing aldehydes may be used in the fermentation of wine to be used as distilling material. Lees, filter..., DEPARTMENT OF THE TREASURY ALCOHOL WINE Production of Other Than Standard Wine § 24.216 Distilling material. Wine may be produced on bonded wine premises from grapes and other fruit, natural fruit products,...

  4. 27 CFR 24.216 - Distilling material.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... containing aldehydes may be used in the fermentation of wine to be used as distilling material. Lees, filter..., DEPARTMENT OF THE TREASURY LIQUORS WINE Production of Other Than Standard Wine § 24.216 Distilling material. Wine may be produced on bonded wine premises from grapes and other fruit, natural fruit products,...

  5. Potential bleaching techniques for corn distillers grains

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The ethanol industry is booming, and extensive research is now being pursued to develop alternative uses for distillers dried grains (DDG) and distillers dried grains with solubles (DDGS), coproducts of the ethanol production process. Currently, DDG and DDGS are used exclusively as livestock feed. P...

  6. 21 CFR 184.1848 - Starter distillate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of... distillate) is a steam distillate of the culture of any or all of the following species of bacteria grown...

  7. Recycling of Waste Acetone by Fractional Distillation

    ERIC Educational Resources Information Center

    Weires, Nicholas A.; Johnston, Aubrey; Warner, Don L.; McCormick, Michael M.; Hammond, Karen; McDougal, Owen M.

    2011-01-01

    Distillation is a ubiquitous technique in the undergraduate organic chemistry curriculum; the technique dates back to ca. 3500 B.C.E. With the emergence of green chemistry in the 1990s, the importance of emphasizing responsible waste management practices for future scientists is paramount. Combining the practice of distillation with the message…

  8. A Comprehensive Real-World Distillation Experiment

    ERIC Educational Resources Information Center

    Kazameas, Christos G.; Keller, Kaitlin N.; Luyben, William L.

    2015-01-01

    Most undergraduate mass transfer and separation courses cover the design of distillation columns, and many undergraduate laboratories have distillation experiments. In many cases, the treatment is restricted to simple column configurations and simplifying assumptions are made so as to convey only the basic concepts. In industry, the analysis of a…

  9. Distillation of Bell states in open systems

    SciTech Connect

    Isasi, E.; Mundarain, D.

    2010-04-15

    In this work we show that the distillation protocol proposed by P. Chen et al. [Phys. Rev. A 54, 3824 (1996)] allows one to distill Bell states at any time for a system evolving in vacuum and prepared in an initial singlet. It is also shown that the same protocol, applied in nonzero temperature thermal baths, yields a considerable recovering of entanglement.

  10. Recycling of acetone by distillation

    SciTech Connect

    Brennan, D.L.; Campbell, B.A.; Phelan, J.E.; Harper, M.

    1992-09-01

    The Resource Conservation Recovery Act (RCRA) identifies spent acetone solvent as a listed hazardous waste. At Fernald, acetone has been spent that has been contaminated with radionuclides and therefore is identified as a mixed hazardous waste. At the time of this publication there is no available approved method of recycling or disposal of radioactively contaminated spent acetone solvent. The Consent Decree with the Ohio EPA and the Consent Agreement with the United States EPA was agreed upon for the long-term compliant storage of hazardous waste materials. The purpose of this project was to demonstrate the feasibility for safely decontaminating spent acetone to background levels of radioactivity for reuse. It was postulated that through heat distillation, radionuclides could be isolated from the spent acetone.

  11. Removal and biodegradation of naphthenic acids by biochar and attached environmental biofilms in the presence of co-contaminating metals.

    PubMed

    Frankel, Mathew L; Bhuiyan, Tazul I; Veksha, Andrei; Demeter, Marc A; Layzell, David B; Helleur, Robert J; Hill, Josephine M; Turner, Raymond J

    2016-09-01

    This study evaluated the efficacy of using a combined biofilm-biochar approach to remove organic (naphthenic acids (NAs)) and inorganic (metals) contaminants from process water (OSPW) generated by Canada's oil sands mining operations. A microbial community sourced from an OSPW sample was cultured as biofilms on several carbonaceous materials. Two biochar samples, from softwood bark (SB) and Aspen wood (N3), facilitated the most microbial growth (measured by protein assays) and were used for NA removal studies performed with and without biofilms, and in the presence and absence of contaminating metals. Similar NA removal was seen in 6-day sterile N3 and SB assays (>30%), while biodegradation by SB-associated biofilms increased NA removal to 87% in the presence of metals. Metal sorption was also observed, with up to four times more immobilization of Fe, Al, and As on biofilm-associated biochar. These results suggest this combined approach may be a promising treatment for OSPW.

  12. In situ biodegradation of naphthenic acids in oil sands tailings pond water using indigenous algae-bacteria consortium.

    PubMed

    Mahdavi, Hamed; Prasad, Vinay; Liu, Yang; Ulrich, Ania C

    2015-01-01

    In this study, the biodegradation of total acid-extractable organics (TAOs), commonly called naphthenic acids (NAs), was investigated. An indigenous microbial culture containing algae and bacteria was taken from the surface of a tailings pond and incubated over the course of 120days. The influence of light, oxygen and the presence of indigenous algae and bacteria, and a diatom (Navicula pelliculosa) on the TAO removal rate were elucidated. The highest biodegradation rate was observed with bacteria growth only (without light exposure) with a half-life (t(1/2)) of 203days. The algae-bacteria consortium enhanced the detoxification process, however, bacterial biomass played the main role in toxicity reduction. Principal component analysis (PCA) conducted on FT-IR spectra, identified functional groups and bonds (representing potential markers for biotransformation of TAOs) as follows: hydroxyl, carboxyl and amide groups along with CH, arylH, arylOH and NH bonds.

  13. Molecular characterization of nickel and vanadium nonporphyrin compounds found in heavy crude petroleums and bitumens

    SciTech Connect

    Fish, R.H.; Reynolds, J.G.; Gallegos, E.J.

    1986-11-01

    Pyridine/water extracts of selected crude petroleums were separated by polarity on a high performance liquid chromatography (HPLC) octadecylsilane column (ODS) into three fractions; low, moderate, and high polar. The moderate and low polar fractions were examined by electron impact mass spectroscopy (EIMS) to elucidate structural and behavioral characteristics of vanadyl petroporphyrin and metallo-nonporphyrin compounds. The EIMS results indicated vanadyl petroporphyrins in Cerro Negro and Wilmington moderate polar fractions and possibly in the Wilmington low polar fraction. These EIMS results showed the presence of petroporphyrins in the above-mentioned fractions, but no discrete information about the metallo-nonporphyrins. A highly polar nickel fraction from a Wilmington crude petroleum pyridine/water extract, separated on the ODS column, was further purified on a cyano normal phase column. This fraction had a nickel concentration of approximately 15,000 wppM, and was examined by EIMS mass spectroscopy. The spectral results indicated several homologous series structures possible for the binding sites of nickel. Further examination of the same fraction by positive ion fast atom bombardment mass spectroscopy, using a metal ion exchange technique, showed a substantially simplified spectrum and indicated the possibility of the nickel binding sites being small molecular weight naphthenic (carboxylic) acid salts. Gilsonite, a bitumen, was analyzed by reversed-phase HPLC with graphite furnace atomic absorption element specific detection, which indicated that the nickel is predominantly bound as metallopetroporphyrin, while a small portion eluted as a highly polar metallo-nonporphyrin fraction. These results are important in the identification of nonporphyrin metal-containing compounds in heavy crude petroleums and residua and could be beneficial for future petroleum exploration as metallobiomarkers. 21 refs., 11 figs.

  14. Aromatic characterization of pot distilled kiwi spirits.

    PubMed

    López-Vázquez, Cristina; García-Llobodanin, Laura; Pérez-Correa, José Ricardo; López, Francisco; Blanco, Pilar; Orriols, Ignacio

    2012-03-07

    This study contributes fundamental knowledge that will help to develop a distillate of kiwi wine, made from kiwis of the Hayward variety grown in the southwest of Galicia (Spain). Two yeast strains, L1 (Saccharomyces cerevisiae ALB-6 from the EVEGA yeast collection) and L2 (S. cerevisiae Uvaferm BDX from Lallemand) were assessed to obtain a highly aromatic distillate. The kiwi spirits obtained were compared with other fruit spirits, in terms of higher alcohols, minor alcohols, monoterpenols, and other minor compounds, which are relevant in determining the quality and taste of the kiwi spirits. It was found that the kiwi juice fermented with yeast L1 produced a more aromatic distillate. In addition, kiwi distillates produced with both yeasts had the same ratio of trans-3-hexen-1-ol and cis-3-hexen-1-ol, which is lower than that found in other fruit distillates.

  15. Degradation and aquatic toxicity of naphthenic acids in oil sands process-affected waters using simulated wetlands.

    PubMed

    Toor, Navdeep S; Franz, Eric D; Fedorak, Phillip M; MacKinnon, Michael D; Liber, Karsten

    2013-01-01

    Oil sands process-affected waters (OSPWs) produced during the extraction of bitumen at the Athabasca Oil Sands (AOS) located in northeastern Alberta, Canada, are toxic to many aquatic organisms. Much of this toxicity is related to a group of dissolved organic acids known as naphthenic acids (NAs). Naphthenic acids are a natural component of bitumen and are released into process water during the separation of bitumen from the oil sand ore by a caustic hot water extraction process. Using laboratory microcosms as an analogue of a proposed constructed wetland reclamation strategy for OSPW, we evaluated the effectiveness of these microcosms in degrading NAs and reducing the aquatic toxicity of OSPW over a 52-week test period. Experimental manipulations included two sources of OSPW (one from Syncrude Canada Ltd. and one from Suncor Energy Inc.), two different hydraulic retention times (HRTs; 40 and 400 d), and increased nutrient availability (added nitrate and phosphate). Microcosms with a longer HRT (for both OSPWs) showed higher reductions in total NAs concentrations (64-74% NAs reduction, p<0.05) over the test period, while nutrient enrichment appeared to have little effect. A 96 h static acute rainbow trout (Oncorhynchus mykiss) bioassay showed that the initial acute toxicity of Syncrude OSPW (LC50=67% v/v) was reduced (LC50>100% v/v) independent of HRT. However, EC20s from separate Microtox® bioassays were relatively unchanged when comparing the input and microcosm waters at both HRTs over the 52-week study period (p>0.05), indicating that some sub-lethal toxicity persisted under these experimental conditions. The present study demonstrated that given sufficiently long HRTs, simulated wetland microcosms containing OSPW significantly reduced total NAs concentrations and acute toxicity, but left behind a persistent component of the NAs mixture that appeared to be associated with residual chronic toxicity.

  16. Impact of temperature, pH, and salinity changes on the physico-chemical properties of model naphthenic acids.

    PubMed

    Celsie, Alena; Parnis, J Mark; Mackay, Donald

    2016-03-01

    The effects of temperature, pH, and salinity change on naphthenic acids (NAs) present in oil-sands process wastewater were modeled for 55 representative NAs. COSMO-RS was used to estimate octanol-water (KOW) and octanol-air (KOA) partition ratios and Henry's law constants (H). Validation with experimental carboxylic acid data yielded log KOW and log H RMS errors of 0.45 and 0.55 respectively. Calculations of log KOW, (or log D, for pH-dependence), log KOA and log H (or log HD, for pH-dependence) were made for model NAs between -20 °C and 40 °C, pH between 0 and 14, and salinity between 0 and 3 g NaCl L(-1). Temperature increase by 60 °C resulted in 3-5 log unit increase in H and a similar magnitude decrease in KOA. pH increase above the NA pKa resulted in a dramatic decrease in both log D and log HD. Salinity increase over the 0-3 g NaCl L(-1) range resulted in a 0.3 log unit increase on average for KOW and H values. Log KOW values of the sodium salt and anion of the conjugate base were also estimated to examine their potential for contribution to the overall partitioning of NAs. Sodium salts and anions of naphthenic acids are predicted to have on average 4 log units and 6 log units lower log KOW values, respectively, with respect to the corresponding neutral NA. Partitioning properties are profoundly influenced by the by the relative prevailing pH and the substance's pKa at the relevant temperature.

  17. Petroleum supply monthly, May 1994

    SciTech Connect

    Not Available

    1994-05-27

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum supply annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  18. Petroleum supply monthly, January 1996

    SciTech Connect

    1996-02-15

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  19. Petroleum supply monthly, September 1991

    SciTech Connect

    Not Available

    1991-09-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administrations for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics. 65 tabs.

  20. Petroleum supply monthly, October 1993

    SciTech Connect

    Not Available

    1993-10-26

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  1. Petroleum supply monthly, June 1994

    SciTech Connect

    Not Available

    1994-06-28

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  2. Petroleum Supply Monthly, August 1990

    SciTech Connect

    Not Available

    1990-10-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) district movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  3. Petroleum supply monthly, July 1994

    SciTech Connect

    Not Available

    1994-07-26

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  4. Petroleum Supply Monthly, July 1990

    SciTech Connect

    Not Available

    1990-09-28

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  5. Strategic Petroleum Reserve quarterly report

    SciTech Connect

    1995-11-15

    The Strategic Petroleum Reserve was created pursuant to the Energy Policy and Conservation Act of December 22, 1975 (Public Law 94-163). Its purposes are to reduce the impact of disruptions in supplies of petroleum products and to carry out obligations of the United States under the Agreement on an International Energy Program. Section 165(a) of the Act requires the submission of Annual Reports and Section 165(b)(1) requires the submission of Quarterly Reports. This Quarterly Report highlights activities undertaken during the third quarter of calendar year 1995, including: inventory of petroleum products stored in the Reserve; current storage capacity and ullage available; current status of the Strategic Petroleum Reserve storage facilities, major projects and the acquisition of petroleum products; funds obligated by the Secretary from the SPR Petroleum Account and the Strategic Petroleum Reserve Account during the prior calendar quarter and in total; and major environmental actions completed, in progress, or anticipated.

  6. Cascade Distiller System Performance Testing Interim Results

    NASA Technical Reports Server (NTRS)

    Callahan, Michael R.; Pensinger, Stuart; Sargusingh, Miriam J.

    2014-01-01

    The Cascade Distillation System (CDS) is a rotary distillation system with potential for greater reliability and lower energy costs than existing distillation systems. Based upon the results of the 2009 distillation comparison test (DCT) and recommendations of the expert panel, the Advanced Exploration Systems (AES) Water Recovery Project (WRP) project advanced the technology by increasing reliability of the system through redesign of bearing assemblies and improved rotor dynamics. In addition, the project improved the CDS power efficiency by optimizing the thermoelectric heat pump (TeHP) and heat exchanger design. Testing at the NASA-JSC Advanced Exploration System Water Laboratory (AES Water Lab) using a prototype Cascade Distillation Subsystem (CDS) wastewater processor (Honeywell d International, Torrance, Calif.) with test support equipment and control system developed by Johnson Space Center was performed to evaluate performance of the system with the upgrades as compared to previous system performance. The system was challenged with Solution 1 from the NASA Exploration Life Support (ELS) distillation comparison testing performed in 2009. Solution 1 consisted of a mixed stream containing human-generated urine and humidity condensate. A secondary objective of this testing is to evaluate the performance of the CDS as compared to the state of the art Distillation Assembly (DA) used in the ISS Urine Processor Assembly (UPA). This was done by challenging the system with ISS analog waste streams. This paper details the results of the AES WRP CDS performance testing.

  7. Norwegian petroleum guide

    SciTech Connect

    Christie, H.B.

    1984-01-01

    This is about the comprehensive guide to Norwegian oil and gas activities, very useful to anyone in the industry. Material includes political guidelines, control institutions, work possibilities and licenses, working environment law, employer and employee organizations, national insurance, taxes, communication, rescue operations and standby. Contents: Oil and the economy; Petroleum technology research; Responsibilities of different authorities; The Labour Inspection Directorate; The Health Directorate Offshore Office; The Coastal Directorate; Helicopter traffic; The Norwegian Petroleum Directorate; The Maritime Directorate; Det norske Veritas; The Norwegian Waterways and Electricity Board; The State Institute for Radiation Hygiene; The State Explosive Inspection; Work possibilities in the North Sea; Working environment legislation on the Continental Shelf; Collective bargaining agreements, labor conflicts and the right to organize; Taxation Rules; National health insurance and the petroleum activity; Occupational injuries on the Norwegian Continental Shelf; Company insurances; The private pension scheme; Other types of insuracne common among oil companies; The rescue service in Norway; Oganizations within the oil industry offshore and onshore; and Law of aliens admission to the Kindgom.

  8. Matrix-elimination with steam distillation for determination of short-chain fatty acids in hypersaline waters from pre-salt layer by ion-exclusion chromatography.

    PubMed

    Ferreira, Fernanda N; Carneiro, Manuel C; Vaitsman, Delmo S; Pontes, Fernanda V M; Monteiro, Maria Inês C; Silva, Lílian Irene D da; Neto, Arnaldo Alcover

    2012-02-03

    A method for determination of formic, acetic, propionic and butyric acids in hypersaline waters by ion-exclusion chromatography (IEC), using steam distillation to eliminate matrix-interference, was developed. The steam distillation variables such as type of solution to collect the distillate, distillation time and volume of the 50% v/v H₂SO₄ solution were optimized. The effect of the addition of NaCl different concentrations to the calibration standards on the carboxylic acid recovery was also investigated. Detection limits of 0.2, 0.5, 0.3 and 1.5 mg L⁻¹ were obtained for formic, acetic, propionic and butyric acids, respectively. Produced waters from petroleum reservoirs in the Brazilian pre-salt layer containing about 19% m/v of NaCl were analyzed. Good recoveries (99-108%) were obtained for all acids in spiked produced water samples.

  9. [His Majesty's distillers: distillation and chemical medicine in the court of Phillip II].

    PubMed

    Rey Bueno, M; Alegre Pérez, M E

    2001-01-01

    The present work studies the appearance and development of Paracelsian Practices in the Spanish Court through a linked series of events that took place between 1564 and 1602. These were: the creation of Philippine distillation laboratories, the ordenance of the protophysician Francisco de Valles regarding distilled waters; the concession of a patent to Diego de Santiago for the invention of a steam distillery; the publication of the last treatise by Francisco de Valles, dedicated to weights, measures, and distilled waters; the appearance of a distiller on the founding staff of the Royal Apothecary, in charge of preparing all the distilled waters and chemical medicines; and the creation of a new post within the Court health organigram, that of Distiller Major.

  10. Microbial degradation of petroleum hydrocarbons.

    PubMed

    Varjani, Sunita J

    2017-01-01

    Petroleum hydrocarbon pollutants are recalcitrant compounds and are classified as priority pollutants. Cleaning up of these pollutants from environment is a real world problem. Bioremediation has become a major method employed in restoration of petroleum hydrocarbon polluted environments that makes use of natural microbial biodegradation activity. Petroleum hydrocarbons utilizing microorganisms are ubiquitously distributed in environment. They naturally biodegrade pollutants and thereby remove them from the environment. Removal of petroleum hydrocarbon pollutants from environment by applying oleophilic microorganisms (individual isolate/consortium of microorganisms) is ecofriendly and economic. Microbial biodegradation of petroleum hydrocarbon pollutants employs the enzyme catalytic activities of microorganisms to enhance the rate of pollutants degradation. This article provides an overview about bioremediation for petroleum hydrocarbon pollutants. It also includes explanation about hydrocarbon metabolism in microorganisms with a special focus on new insights obtained during past couple of years.

  11. Wear resistance evaluation of palm fatty acid distillate using four-ball tribotester

    NASA Astrophysics Data System (ADS)

    Golshokouh, Iman; Ani, Farid Nasir; Syahrullail, S.

    2012-06-01

    Petroleum reserves are declining nowadays while ironically petroleum is a major source of pollution despite many uses. Researchers are in effort to find an alternative to replace petroleum as a lubricant. One of the best replace sources for petroleum is bio-oil. In this paper, a comparative study of friction and wear was carried out using a fourball tester. In this research, Palm Fatty Acid Distillate (PFAD) and Jatropha oil, two well-known oils from the vegetable family oils were compared with Hydraulic mineral oil and commercial mineral Engine oil. All investigated oils in this study are used in industries as lubricants. PFAD is a product from refined crude palm oil. It exists as a light brown solid at room temperature and Jatropa oil is produced from the seeds of the Jatropha cruces, a plant that grows in marginal lands. For the wear test, the experimental research condition was comparing four kind of oils with ASTM condition in which the load applied was 392N. The sliding speed was 1200rpm under the lubricant temperature of 75 degree Celsius. The experiment was run for 3600 seconds. The experimental results demonstrated that the PFAD and Jatropha oils exhibited better performance in term of friction and wear compared to Hydraulic and Engine mineral oils.

  12. Distillation modeling for a uranium refining process

    SciTech Connect

    Westphal, B.R.

    1996-03-01

    As part of the spent fuel treatment program at Argonne National Laboratory, a vacuum distillation process is being employed for the recovery of uranium following an electrorefining process. Distillation of a salt electrolyte, containing a eutectic mixture of lithium and potassium chlorides, from uranium is achieved by a simple batch operation and is termed {open_quotes}cathode processing{close_quotes}. The incremental distillation of electrolyte salt will be modeled by an equilibrium expression and on a molecular basis since the operation is conducted under moderate vacuum conditions. As processing continues, the two models will be compared and analyzed for correlation with actual operating results. Possible factors that may contribute to aberrations from the models include impurities at the vapor-liquid boundary, distillate reflux, anomalous pressure gradients, and mass transport phenomena at the evaporating surface. Ultimately, the purpose of either process model is to enable the parametric optimization of the process.

  13. Efficient entanglement distillation without quantum memory

    PubMed Central

    Abdelkhalek, Daniela; Syllwasschy, Mareike; Cerf, Nicolas J.; Fiurášek, Jaromír; Schnabel, Roman

    2016-01-01

    Entanglement distribution between distant parties is an essential component to most quantum communication protocols. Unfortunately, decoherence effects such as phase noise in optical fibres are known to demolish entanglement. Iterative (multistep) entanglement distillation protocols have long been proposed to overcome decoherence, but their probabilistic nature makes them inefficient since the success probability decays exponentially with the number of steps. Quantum memories have been contemplated to make entanglement distillation practical, but suitable quantum memories are not realised to date. Here, we present the theory for an efficient iterative entanglement distillation protocol without quantum memories and provide a proof-of-principle experimental demonstration. The scheme is applied to phase-diffused two-mode-squeezed states and proven to distil entanglement for up to three iteration steps. The data are indistinguishable from those that an efficient scheme using quantum memories would produce. Since our protocol includes the final measurement it is particularly promising for enhancing continuous-variable quantum key distribution. PMID:27241946

  14. Unifying Gate Synthesis and Magic State Distillation

    NASA Astrophysics Data System (ADS)

    Campbell, Earl T.; Howard, Mark

    2017-02-01

    The leading paradigm for performing a computation on quantum memories can be encapsulated as distill-then-synthesize. Initially, one performs several rounds of distillation to create high-fidelity magic states that provide one good T gate, an essential quantum logic gate. Subsequently, gate synthesis intersperses many T gates with Clifford gates to realize a desired circuit. We introduce a unified framework that implements one round of distillation and multiquibit gate synthesis in a single step. Typically, our method uses the same number of T gates as conventional synthesis but with the added benefit of quadratic error suppression. Because of this, one less round of magic state distillation needs to be performed, leading to significant resource savings.

  15. Minimizing corrosion in coal liquid distillation

    DOEpatents

    Baumert, Kenneth L.; Sagues, Alberto A.; Davis, Burtron H.

    1985-01-01

    In an atmospheric distillation tower of a coal liquefaction process, tower materials corrosion is reduced or eliminated by introduction of boiling point differentiated streams to boiling point differentiated tower regions.

  16. Entanglement of Distillation for Lattice Gauge Theories

    NASA Astrophysics Data System (ADS)

    Van Acoleyen, Karel; Bultinck, Nick; Haegeman, Jutho; Marien, Michael; Scholz, Volkher B.; Verstraete, Frank

    2016-09-01

    We study the entanglement structure of lattice gauge theories from the local operational point of view, and, similar to Soni and Trivedi [J. High Energy Phys. 1 (2016) 1], we show that the usual entanglement entropy for a spatial bipartition can be written as the sum of an undistillable gauge part and of another part corresponding to the local operations and classical communication distillable entanglement, which is obtained by depolarizing the local superselection sectors. We demonstrate that the distillable entanglement is zero for pure Abelian gauge theories at zero gauge coupling, while it is in general nonzero for the non-Abelian case. We also consider gauge theories with matter, and show in a perturbative approach how area laws—including a topological correction—emerge for the distillable entanglement. Finally, we also discuss the entanglement entropy of gauge fixed states and show that it has no relation to the physical distillable entropy.

  17. Strategic Petroleum Reserve quarterly report

    SciTech Connect

    Not Available

    1990-08-15

    The Strategic Petroleum Reserve Quarterly Report is submitted in accordance with section 165(b) of the Energy Policy and Conservation Act, as amended, which requires that the Secretary of Energy submit quarterly reports to Congress on Activities undertaken with respect to the Strategic Petroleum Reserve. This August 15, 1990, Strategic Petroleum Reserve Quarterly Report describes activities related to the site development, oil acquisition, budget and cost of the Reserve during the period April 1, 1990, through June 30, 1990. 3 tabs.

  18. Multipartite secret key distillation and bound entanglement

    SciTech Connect

    Augusiak, Remigiusz; Horodecki, Pawel

    2009-10-15

    Recently it has been shown that quantum cryptography beyond pure entanglement distillation is possible and a paradigm for the associated protocols has been established. Here we systematically generalize the whole paradigm to the multipartite scenario. We provide constructions of new classes of multipartite bound entangled states, i.e., those with underlying twisted Greenberger-Horne-Zeilinger (GHZ) structure and nonzero distillable cryptographic key. We quantitatively estimate the key from below with the help of the privacy squeezing technique.

  19. Distillation tray structural parameter study: Phase 1

    NASA Technical Reports Server (NTRS)

    Winter, J. Ronald

    1991-01-01

    The purpose here is to identify the structural parameters (plate thickness, liquid level, beam size, number of beams, tray diameter, etc.) that affect the structural integrity of distillation trays in distillation columns. Once the sensitivity of the trays' dynamic response to these parameters has been established, the designer will be able to use this information to prepare more accurate specifications for the construction of new trays. Information is given on both static and dynamic analysis, modal response, and tray failure details.

  20. Petroleum supply monthly: December 1993

    SciTech Connect

    Not Available

    1993-12-01

    Data are presented which describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States. Data are presented in two sections: Summary Statistics, presenting a time series of selected petroleum data on a U.S. level, and Detailed Statistics, presenting statistics for the most current month available as well as year to date.

  1. Quantum Nonlocal Boxes Exhibit Stronger Distillability

    NASA Astrophysics Data System (ADS)

    Høyer, Peter; Rashid, Jibran

    2013-06-01

    The hypothetical nonlocal box (NLB) proposed by Popescu and Rohrlich allows two spatially separated parties, Alice and Bob, to exhibit stronger than quantum correlations. If the generated correlations are weak, they can sometimes be distilled into a stronger correlation by repeated applications of the NLB. Motivated by the limited distillability of NLBs, we initiate here a study of the distillation of correlations for nonlocal boxes that output quantum states rather than classical bits (qNLBs). We propose a new protocol for distillation and show that it asymptotically distills a class of correlated quantum nonlocal boxes to the value (1)/(2)(3√ {3}+1) ≈ 3.098076, whereas in contrast, the optimal non-adaptive parity protocol for classical nonlocal boxes asymptotically distills only to the value 3.0. We show that our protocol is an optimal non-adaptive protocol for 1, 2 and 3 qNLB copies by constructing a matching dual solution for the associated primal semidefinite program (SDP). We conclude that qNLBs are a stronger resource for nonlocality than NLBs. The main premise that develops from this conclusion is that the NLB model is not the strongest resource to investigate the fundamental principles that limit quantum nonlocality. As such, our work provides strong motivation to reconsider the status quo of the principles that are known to limit nonlocal correlations under the framework of qNLBs rather than NLBs.

  2. 31 CFR 542.412 - Transactions relating to Syrian petroleum or petroleum products from third countries...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... petroleum or petroleum products from third countries; transshipments. 542.412 Section 542.412 Money and... Syrian petroleum or petroleum products from third countries; transshipments. (a) Transactions relating to goods containing petroleum or petroleum products of Syrian origin are not prohibited by § 542.208...

  3. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 2 2012-04-01 2012-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  4. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 2 2012-01-01 2012-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710...

  5. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  6. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 2 2011-01-01 2011-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710...

  7. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 2 2013-04-01 2013-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  8. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 2 2014-04-01 2014-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  9. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 2 2014-01-01 2014-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710...

  10. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 2 2013-01-01 2013-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710...

  11. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 2 2011-04-01 2011-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  12. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710...

  13. 27 CFR 19.307 - Distillates containing extraneous substances.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... fermenting or distilling material at the distillery where produced. (b) Use at adjacent bonded wine cellar. Distillates that contain aldehydes may be removed, without payment of tax, to an adjacent bonded wine cellar for use in fermentation of wine to be used as distilling material at the distilled spirits plant...

  14. 27 CFR 19.307 - Distillates containing extraneous substances.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... fermenting or distilling material at the distillery where produced. (b) Use at adjacent bonded wine cellar. Distillates that contain aldehydes may be removed, without payment of tax, to an adjacent bonded wine cellar for use in fermentation of wine to be used as distilling material at the distilled spirits plant...

  15. 27 CFR 19.307 - Distillates containing extraneous substances.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... fermenting or distilling material at the distillery where produced. (b) Use at adjacent bonded wine cellar. Distillates that contain aldehydes may be removed, without payment of tax, to an adjacent bonded wine cellar for use in fermentation of wine to be used as distilling material at the distilled spirits plant...

  16. 27 CFR 19.322 - Distillates containing extraneous substances.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... added promptly to the fermenting or distilling material. (b) Use at bonded wine cellar. Distillates containing aldehydes may be removed, without payment of tax, to an adjacent bonded wine cellar for use therein for fermentation of wine to be used as distilling material at the distilled spirits plant...

  17. 27 CFR 19.307 - Distillates containing extraneous substances.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... fermenting or distilling material at the distillery where produced. (b) Use at adjacent bonded wine cellar. Distillates that contain aldehydes may be removed, without payment of tax, to an adjacent bonded wine cellar for use in fermentation of wine to be used as distilling material at the distilled spirits plant...

  18. 7 CFR 160.8 - Steam distilled wood turpentine.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Steam distilled wood turpentine. 160.8 Section 160.8... STANDARDS FOR NAVAL STORES General § 160.8 Steam distilled wood turpentine. The designation “steam distilled wood turpentine” shall refer to the kind of spirits of turpentine obtained by steam distillation...

  19. 7 CFR 160.8 - Steam distilled wood turpentine.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Steam distilled wood turpentine. 160.8 Section 160.8... STANDARDS FOR NAVAL STORES General § 160.8 Steam distilled wood turpentine. The designation “steam distilled wood turpentine” shall refer to the kind of spirits of turpentine obtained by steam distillation...

  20. 7 CFR 160.8 - Steam distilled wood turpentine.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Steam distilled wood turpentine. 160.8 Section 160.8... STANDARDS FOR NAVAL STORES General § 160.8 Steam distilled wood turpentine. The designation “steam distilled wood turpentine” shall refer to the kind of spirits of turpentine obtained by steam distillation...

  1. 7 CFR 160.8 - Steam distilled wood turpentine.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Steam distilled wood turpentine. 160.8 Section 160.8... STANDARDS FOR NAVAL STORES General § 160.8 Steam distilled wood turpentine. The designation “steam distilled wood turpentine” shall refer to the kind of spirits of turpentine obtained by steam distillation...

  2. 7 CFR 160.8 - Steam distilled wood turpentine.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Steam distilled wood turpentine. 160.8 Section 160.8... STANDARDS FOR NAVAL STORES General § 160.8 Steam distilled wood turpentine. The designation “steam distilled wood turpentine” shall refer to the kind of spirits of turpentine obtained by steam distillation...

  3. Underground petroleum tanks

    SciTech Connect

    Not Available

    1990-07-01

    This book presents the results of a survey of 46 state underground storage tank program officials. The survey covers: Whether petroleum tank insurance (mandated by the EPA) is available in each state and whether category 3 and 4 owners can obtain it; state programs that help owners meet the financial responsibility and/or technical requirements of such insurance; and lending institutions' attitudes towards providing loans to storage tank owners. A survey of the number and terms of insurance policies offered to tank owners is also presented.

  4. International petroleum statistics report

    SciTech Connect

    1995-10-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report presents data on international oil production, demand, imports, exports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world, in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  5. Petroleum supply monthly, June 1993

    SciTech Connect

    Not Available

    1993-06-28

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures ih the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas - - the United States (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided firom other sources.

  6. Petroleum supply monthly, March 1994

    SciTech Connect

    Not Available

    1994-03-30

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas -- the United States (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided from other sources.

  7. International petroleum statistics report

    SciTech Connect

    1997-05-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. Publication of this report is in keeping with responsibilities given the Energy Information Administration in Public Law 95-91. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  8. Indigenous Precambrian petroleum revisited

    SciTech Connect

    Murray, G.E.; Kaczor, M.J.; McArthur, R.E.

    1980-10-01

    Irrefutable evidence of fossil remains from Precambrian sediments and proved petroleum reserves in upper Proterozoic (Riphean-Vendian) strata of the Irkutsk basin, USSR, suggest that unmetamorphosed Precambrian sedimentary rocks should be a focus for hydrocarbon exploration. Since 1965, a dramatic increase in publications which document worldwide occurrences of Precambrian life forms discloses that, by the end of the Proterozoic, organic evolution had produced diversified assemblages of relatively highly developed macroorganisms and microorganisms. Some of these organisms have generated crude oil in the Nonesuch Shale of northern Michigan and kerogen in stromatolitic carbonate rocks in Africa Kerogen has been extracted from approx. 2300-m.y. old Transvaal (Africa) stromatolitic limestone containing coccoid and complex filamentous cyanophytes. Also, aromatic and aliphatic hydrocarbons have been obtained from the approx. 2800-m.y. old Bulawayan stromatolitic limestone of Rhodesia. Additional evidence indicates that commercial reserves of petroleum from Precambrian strata are possible. An oil discovery in Lower Cambrian rocks in 1962, at Markovo in the Irkutsk basin of the Siberian platform area, led to four noncommercial and eight commercial fields producing from Lower Cambrian and Upper Proterozoic strata.

  9. Petroleum: An energy profile, 1999

    SciTech Connect

    1999-07-01

    This report prepared by the Energy Information Administration covers the following topics: petroleum production and end-use sectors; resources and reserves; exploration and production; LPG sources and processing; motor gasoline octane enhancement; constructing pipelines; the strategic petroleum reserve; imports and exports; marketing; district descriptions and maps; and refinery processes and facilities. 33 figs., 7 tabs.

  10. Petroleum occurrences and plate tectonics

    SciTech Connect

    Olenin, V.B.; Sokolov, B.A.

    1983-01-01

    This paper analyzes the mechanisms of petroleum formation and petroleum accumulation proposed in recent years by some Russian and foreign investigators from the viewpoint of the new global or plate tectonics. On the basis of discussion and the facts, the authors conclude that the mechanisms proposed are in contradiction to reality and their use in practical application is at least premature.

  11. Discrimination of petroleum fluorescence spectra.

    PubMed

    Stelmaszewski, Adam

    2007-01-01

    This paper presents studies of the total spectra (fluorescence-excitation matrix) of petroleum with regard to the utilization of fluorescence for determining petroleum pollutants. Thorough testing of one group, comprising almost forty lubricating oils in the form of their hexane solutions, points out their discrimination.

  12. Strategic petroleum reserve. Quarterly report

    SciTech Connect

    Not Available

    1994-05-15

    The Strategic Petroleum Reserve serves as one of our most important investments in reducing the Nation`s vulnerability to oil supply disruptions. Its existence provides an effective response mechanism should a disruption occur and a formidable deterrent to the use of oil as a political instrument. The Strategic Petroleum Reserve was created pursuant to the Energy Policy and Conservation Act of December 22, 1975, (Public Law 94-163) as amended, to reduce the impact of disruptions in supplies of petroleum products and to carry out obligations of the United States under the Agreement on an International Energy Program. Section 165(a) of the Act requires the submission of Annual Reports and Section 165(b)(1) requires the submission of Quarterly Reports. This Quarterly Report highlights activities undertaken during the first quarter of calendar year 1994, including: (1) inventory of petroleum products stored in the Reserve, under contract and in transit at the end of the calendar quarter; (2) fill rate for the current quarter and projected fill rate for the next calendar quarter; (3) average price of the petroleum products acquired during the calendar quarter; (4) current and projected storage capacity; (5) analysis of existing or anticipated problems with the acquisition and storage of petroleum products, and future expansion of storage capacity; (6) funds obligated by the Secretary from the SPR Petroleum Account and the Strategic Petroleum Reserve Account during the prior calendar quarter and in total; and (7) major environmental actions completed, in progress, or anticipated.

  13. Job Prospects for Petroleum Engineers.

    ERIC Educational Resources Information Center

    Basta, Nicholas

    1988-01-01

    Describes petroleum engineering as one area in industry where job opportunities are few but where the worst of the declines has been seen. Discusses the causes of the decline. Lists several areas where petroleum engineers have found alternatives including environmental projects, water supply projects, and computer applications. (CW)

  14. 40 CFR 721.4500 - Isopropylamine distillation residues and ethylamine distillation residues.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Isopropylamine distillation residues and ethylamine distillation residues. 721.4500 Section 721.4500 Protection of Environment... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.4500 Isopropylamine...

  15. 40 CFR 721.4500 - Isopropylamine distillation residues and ethylamine distillation residues.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Isopropylamine distillation residues and ethylamine distillation residues. 721.4500 Section 721.4500 Protection of Environment... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.4500 Isopropylamine...

  16. 40 CFR 721.4500 - Isopropylamine distillation residues and ethylamine distillation residues.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Isopropylamine distillation residues and ethylamine distillation residues. 721.4500 Section 721.4500 Protection of Environment... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.4500 Isopropylamine...

  17. 40 CFR 721.4500 - Isopropylamine distillation residues and ethylamine distillation residues.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Isopropylamine distillation residues and ethylamine distillation residues. 721.4500 Section 721.4500 Protection of Environment... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.4500 Isopropylamine...

  18. 40 CFR 721.4500 - Isopropylamine distillation residues and ethylamine distillation residues.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Isopropylamine distillation residues and ethylamine distillation residues. 721.4500 Section 721.4500 Protection of Environment... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.4500 Isopropylamine...

  19. Strategic Petroleum Reserve quarterly report

    SciTech Connect

    Not Available

    1993-08-15

    This Quarterly Report highlights activities undertaken during the second quarter of calendar year 1993, including: inventory of petroleum products stored in the Reserve, under contract and in transit at the end of the calendar quarter; fill rate for the current quarter and projected fill rate for the next calendar quarter; average price of the petroleum products acquired during the calendar quarter; current and projected storage capacity and plans to accelerate the acquisition or construction of such capacity; analysis of existing or anticipated problems with the acquisition and storage of petroleum products, and future expansion of storage capacity; funds obligated by the Secretary from the SPR Petroleum Account and the Strategic Petroleum Reserve Account during the prior calendar quarter and in total; and major environmental actions completed, in progress, or anticipated.

  20. A novel solid-state fractionation of naphthenic acid fraction components from oil sands process-affected water.

    PubMed

    Mohamed, Mohamed H; Wilson, Lee D; Shah, Jaimin R; Bailey, Jon; Peru, Kerry M; Headley, John V

    2015-10-01

    Various sorbent materials were evaluated for the fractionation of naphthenic acid fraction components (NAFCs) from oil sand process-affected water (OSPW). The solid phase materials include activated carbon (AC), cellulose, iron oxides (magnetite and goethite), polyaniline (PANI) and three types of biochar derived from biomass (BC-1; rice husks, BC-2; acacia low temperature and BC-3; acacia high temperature). NAFCs were semi-quantified using electrospray ionization high resolution Orbitrap mass spectrometry (ESI-MS) and the metals were assessed by inductively coupled plasma optical emission spectrometry (ICP-OES). The average removal efficacy of NAFCs by AC was 95%. The removal efficacy decreased in the following order: AC, BC-1>BC-2, BC-3, goethite>PANI>cellulose, magnetite. The removal of metals did not follow a clear trend; however, there was notable leaching of potassium by AC and biochar samples. The bound NAFCs by AC were desorbed efficiently with methanol. Methanol regeneration and recycling of AC revealed 88% removal on the fourth cycle; a 4.4% decrease from the first cycle. This fractionation method represents a rapid, cost-effective, efficient, and green strategy for NAFCs from OSPW, as compared with conventional solvent extraction.

  1. Photocatalytic degradation kinetics of naphthenic acids in oil sands process-affected water: Multifactorial determination of significant factors.

    PubMed

    Leshuk, Tim; de Oliveira Livera, Diogo; Peru, Kerry M; Headley, John V; Vijayaraghavan, Sucharita; Wong, Timothy; Gu, Frank

    2016-12-01

    Oil sands process-affected water (OSPW) is generated as a byproduct of bitumen extraction in Canada's oil sands. Due to the water's toxicity, associated with dissolved acid extractable organics (AEO), especially naphthenic acids (NAs), along with base-neutral organics, OSPW may require treatment to enable safe discharge to the environment. Heterogeneous photocatalysis is a promising advanced oxidation process (AOP) for OSPW remediation, however, predicting treatment efficacy can be challenging due to the unique water chemistry of OSPW from different tailings ponds. The objective of this work was to study various factors affecting the kinetics of photocatalytic AEO degradation in OSPW. The rate of photocatalytic treatment varied significantly in two different OSPW sources, which could not be accounted for by differences in AEO composition, as studied by high resolution mass spectrometry (HRMS). The effects of inorganic water constituents were investigated using factorial and response surface experiments, which revealed that hydroxyl (HO) radical scavenging by iron (Fe(3+)) and bicarbonate (HCO3(-)) inhibited the NA degradation rate. The effects of NA concentration and temperature on the treatment kinetics were also evaluated in terms of Langmuir-Hinshelwood and Arrhenius models; pH and temperature were identified as weak factors, while dissolved oxygen (DO) was critical to the photo-oxidation reaction. Accounting for all of these variables, a general empirical kinetic expression is proposed, enabling prediction of photocatalytic treatment performance in diverse sources of OSPW.

  2. Modified biopolymers as sorbents for the removal of naphthenic acids from oil sands process affected water (OSPW).

    PubMed

    Arshad, Muhammad; Khosa, M A; Siddique, Tariq; Ullah, Aman

    2016-11-01

    Oil sands operations consume large volumes of water in bitumen extraction process and produce tailings that express pore water to the surface of tailings ponds known as oil sands process-affected water (OSPW). The OSPW is toxic and cannot be released into the environment without treatment. In addition to metals, dissolved solids, dissolved gases, hydrocarbons and polyaromatic compounds etc., OSPW also contains a complex mixture of dissolved organic acids, referred to as naphthenic acids (NAs). The NAs are highly toxic and react with metals to develop highly corrosive functionalities which cause corrosion in the oil sands processing and refining processes. We have chemically modified keratin biopolymer using polyhedral oligomeric silsesquioxanes (POSS) nanocages and goethite dopant to unfold keratinous structure for improving functionality. The untreated neat keratin and two modified sorbents were characterized to investigate structural, morphological, dimensional and thermal properties. These sorbents were then tested for the removal of NAs from OSPW. The NAs were selectively extracted and quantified before and after sorption process. The biosorption capacity (Q), rejection percentage (R%) and isotherm models were studied to investigate NAs removal efficiency of POSS modified keratin biopolymer (PMKB) and goethite modified keratin biopolymer (GMKB) from aliquots of OSPW.

  3. Types of Refined Petroleum Products

    EPA Pesticide Factsheets

    These are derived from crude oils through processes such as catalytic cracking and fractional distillation. Examples described here are gasoline, kerosene, no. 2 fuel oil, no. 4 fuel oil, no. 5 fuel oil, no. 6 fuel oil, and lubricating oil.

  4. Characteristics of bicyclic sesquiterpanes in crude oils and petroleum products.

    PubMed

    Yang, Chun; Wang, Zhendi; Hollebone, Bruce P; Brown, Carl E; Landriault, Mike

    2009-05-15

    This study presents a quantitative gas chromatography-mass spectrometry analysis of bicyclic sesquiterpanes (BSs) in numerous crude oils and refined petroleum products including light and mid-range distillate fuels, residual fuels, and lubricating oils collected from various sources. Ten commonly recognized bicyclic sesquiterpanes were determined in all the studied crude oils and diesel range fuels with principal dominance of BS3 (C(15)H(28)), BS5 (C(15)H(28)) and BS10 (C(16)H(30)), while they were generally not detected or in trace in light fuel oils like gasoline and kerosene and most lubricating oils. Laboratory distillation of crude oils demonstrated that sesquiterpanes were highly enriched in the medium distillation fractions of approximately 180 to 481 degrees C and were generally absent or very low in the light distillation fraction (boiling point to approximately 180 degrees C) and the heavy residual fraction (>481 degrees C). The effect of evaporative weathering on a series of diagnostic ratios of sesquiterpanes, n-alkanes, and biomarkers was evaluated with two suites of weathered oil samples. The change of abundance of sesquiterpanes was used to determine the extent of weathering of artificially evaporated crude oils and diesel. In addition to the pentacyclic biomarker C(29) and C(30) alphabeta-hopane, C(15) and C(16) sesquiterpanes might be alternative internal marker compounds to provide a direct way to estimate the depletion of oils, particularly diesels, in oil spill investigations. These findings may offer potential applications for both oil identification and oil-source correlation in cases where the tri- to pentacyclic biomarkers are absent due to refining or environmental weathering of oils.

  5. Strategic Petroleum Reserves

    SciTech Connect

    Not Available

    1989-01-01

    GAO examined approximately 40 alternative, nontraditional methods of acquiring oil for the Strategic Petroleum Reserve. The alternatives identified were compared to the current method of acquiring and financing SPR oil through congressional appropriations that are reported in the budget. When compared to the conventional method of financing oil, most of the proposals have certain benefits or advantages, but all of them have economic or other disadvantages. For example, some proposals would reduce the budget deficit by increasing government revenues but would raise prices to the consumer. Other proposals would reduce short-term expenditures (asset sales, leasing oil or indexed bonds). However, the proposals might increase long-term expenditures by more than the initial reduction in outlays.

  6. Strategic petroleum reserves

    SciTech Connect

    Not Available

    1989-04-01

    This report has examined approximately 40 alternative, nontraditional methods of acquiring oil for the Strategic Petroleum Reserve. The alternatives identified are compared to the current method of acquiring and financing SPR oil through congressional appropriations that are reported in the budget. When compared to the conventional method of financing oil, most of the proposals have certain benefits or advantages, but all of them have economic or other disadvantages. For example, some proposals would reduce the budget deficit by increasing government revenues but would raise prices to the consumer. Other proposals would reduce short-term expenditures (asset sales, leasing oil or indexed bonds). However, the proposals might increase long-term expenditures by more than the initial reduction in outlays.

  7. Entanglement distillation protocols and number theory

    NASA Astrophysics Data System (ADS)

    Bombin, H.; Martin-Delgado, M. A.

    2005-09-01

    We show that the analysis of entanglement distillation protocols for qudits of arbitrary dimension D benefits from applying basic concepts from number theory, since the set ZDn associated with Bell diagonal states is a module rather than a vector space. We find that a partition of ZDn into divisor classes characterizes the invariant properties of mixed Bell diagonal states under local permutations. We construct a very general class of recursion protocols by means of unitary operations implementing these local permutations. We study these distillation protocols depending on whether we use twirling operations in the intermediate steps or not, and we study them both analytically and numerically with Monte Carlo methods. In the absence of twirling operations, we construct extensions of the quantum privacy algorithms valid for secure communications with qudits of any dimension D . When D is a prime number, we show that distillation protocols are optimal both qualitatively and quantitatively.

  8. Superadditivity of distillable entanglement from quantum teleportation

    SciTech Connect

    Bandyopadhyay, Somshubhro; Roychowdhury, Vwani

    2005-12-15

    We show that the phenomenon of superadditivity of distillable entanglement observed in multipartite quantum systems results from the consideration of states created during the execution of the standard end-to-end quantum teleportation protocol [and a few additional local operations and classical communication (LOCC) steps] on a linear chain of singlets. Some of these intermediate states are tensor products of bound entangled (BE) states, and hence, by construction possess distillable entanglement, which can be unlocked by simply completing the rest of the LOCC operations required by the underlying teleportation protocol. We use this systematic approach to construct both new and known examples of superactivation of bound entanglement, and examples of activation of BE states using other BE states. A surprising outcome is the construction of noiseless quantum relay channels with no distillable entanglement between any two parties, except for that between the two end nodes.

  9. Analysis of heavy oils: Method development and application to Cerro Negro heavy petroleum: Topical report. [Metal content in Cerro Negro heavy petroleum

    SciTech Connect

    Pearson, C.D.; Green, J.A.; Green, J.B.

    1988-01-01

    Nickel, vanadium, and iron were determined in distilled and chromatographically separated fractions from Cerro Negro heavy petroleum. Corresponding data were also obtained on two samples of Wilmington, California, heavy crude and one Mayan, Mexico, heavy oil for comparison. For the Cerro Negro crude, the ratio of porphyrinic to nonporphyrinic forms of metals was also determined on selected fractions using visible spectroscopy. In all four heavy petroleums, significant levels of metals were found only in the highest boiling distillate available, ca. 550-700/sup 0/C (1000-1300/sup 0/F), and the residue. Typically, the distillation residue contained >95 percent of a given metal. All crudes contained metalloorganics of the following types: strongly acidic, weakly acidic, strongly basic, weakly basic, and neutral, but the relative distribution of metals among each class was crude dependent. Generally, nickel and vanadium distributions for a given crude followed one another very closely, while those for iron were often inconclusive because of poor mass balances for that element. Attempts to concentrate metalloorganics through liquid chromatographic separation methods largely unsuccessful. The wide variety of types of metal-containing compounds in the crudes examined precluded the use of a single approach for their isolation or preconcentration. 21 refs., 1 fig., 12 tabs.

  10. Strategic petroleum reserve. Quarterly report

    SciTech Connect

    1995-08-15

    The Strategic Petroleum Reserve reduces the Nation`s vulnerability to oil supply disruptions. Its existence provides a formidable deterrent to the use of oil as a political instrument and an effective response mechanism should a disruption occur. The Strategic Petroleum Reserve was created pursuant to the Energy Policy and Conservation Act of December 22, 1975 (Public Law 94-163). Its purposes are to reduce the impact of disruptions in supplies of petroleum products and to carry out obligations of the United States under the Agreement on an International Energy Program. Section 165(a) of the Act requires the submission of Annual Reports and Section 165(b)(1) requires the submission of Quarterly Reports. This Quarterly Report highlights activities undertaken during the second quarter of calendar year 1995, including: inventory of petroleum products stored in the Reserve; current and projected storage capacity, analysis of existing or anticipated problems with the acquisition and storage of petroleum products, and future expansion of storage capacity; funds obligated by the Secretary from the SPR Petroleum Account and the Strategic Petroleum Reserve Account during the prior calendar quarter and in total; and major environmental actions completed, in progress, or anticipated.

  11. Modification by fractionation distillation to increase the quality of Biosolar as same as Pertamina Dex

    NASA Astrophysics Data System (ADS)

    Nugraheni, Ika Kusuma; Triyono

    2017-03-01

    This research studies the modification of Biosolar to have a similar quality with Pertamina Dex. Pertamina Dex is known as the best diesel fuel in Indonesia. Pertamina Dex is made from fossil petroleum like another diesel fuel. The different of Pertamina Dex with another diesel fuel is quality of this fuel is better than another. With a good quality, the price of Pertamina Dex is also higher than another fuel. The composition of fuel can determine the fuels quality. But until now, the specific composition of Pertamina Dex does not publish. Beside Pertamina Dex, another diesel fuel that commonly used in Indonesia is Biosolar. Biosolar consist of 90% of petroleum and 10% of Biodiesel. Biosolar subsidized by the government, so the price of this diesel fuel has a lower cost. This research was conducted to study how a Biosolar as Diesel Fuel can has a similar characteristic with Pertamina Dex that has a good quality. Modification with eliminating components was done by distillation. This modification makes Biosolar has similar component's spread with Pertamina Dex. The similarity in component's spread has a probability that both of fuel has a similar component. In gas chromatography results show that modification by distillation method make Biosolar has a similar retention time with Pertamina Dex. But in characteristic test still has a few differences in calorie and density, and still different in viscosity value. The values are; density: 842.5 kg/m3 (Pertamina Dex), 838.5 kg/m3 (fraction of Biosolar), calorie: 11303.63 Cal/g (Pertamina Dex), 11255.67 Cal/g (Biosolar fraction) and viscosity: 7.37 mm2/s (Pertamina Dex), 5.28 mm2/s (Biosolar fraction). The characteristic results show that modification Biosolar with eliminating components by distillation can increase the characteristic of Biosolar, but did not have a similar characteristic with Pertamina Dex yet.

  12. Biodiesel production from integration between reaction and separation system: reactive distillation process.

    PubMed

    da Silva, Nívea de Lima; Santander, Carlos Mario Garcia; Batistella, César Benedito; Filho, Rubens Maciel; Maciel, Maria Regina Wolf

    2010-05-01

    Biodiesel is a clean burning fuel derived from a renewable feedstock such as vegetable oil or animal fat. It is biodegradable, non-inflammable, non-toxic, and produces lesser carbon monoxide, sulfur dioxide, and unburned hydrocarbons than petroleum-based fuel. The purpose of the present work is to present an efficient process using reactive distillation columns applied to biodiesel production. Reactive distillation is the simultaneous implementation of reaction and separation within a single unit of column. Nowadays, it is appropriately called "Intensified Process". This combined operation is especially suited for the chemical reaction limited by equilibrium constraints, since one or more of the products of the reaction are continuously separated from the reactants. This work presents the biodiesel production from soybean oil and bioethanol by reactive distillation. Different variables affect the conventional biodiesel production process such as: catalyst concentration, reaction temperature, level of agitation, ethanol/soybean oil molar ratio, reaction time, and raw material type. In this study, the experimental design was used to optimize the following process variables: the catalyst concentration (from 0.5 wt.% to 1.5 wt.%), the ethanol/soybean oil molar ratio (from 3:1 to 9:1). The reactive column reflux rate was 83 ml/min, and the reaction time was 6 min.

  13. Heat Transfer Study of Heat-Integrated Distillation Column (HIDiC) Using Simulation Techniques

    NASA Astrophysics Data System (ADS)

    Pulido, Jeffrey León; Martínez, Edgar Leonardo; Wolf, Maria Regina; Filho, Rubens Maciel

    2011-08-01

    Separation processes is largely used in petroleum refining and alcohol industries. Distillation columns consume a huge amount of energy in industrial process. Therefore, the concept of Heat-Integrated Distillation Column (HIDiC) was studied using simulation techniques in order to overcome this drawback. In this configuration the column is composed for two concentric sections called rectifying and stripping. The heat transfer is conducted from the rectifying section (which works at higher pressure and temperature) to the stripping section (which works at lower pressure and temperature) using the heat present in the process and decreasing the energy charge required by the reboiler. The HIDiC column offers great potential to reduce energy consumption compared to conventional columns. However, the complexity of the internal configuration requires the development of rigorous works that enable a better understanding of the column operation. For this reason, techniques of simulation were used through of computational software. The current work presents a heat transfer study in a concentric stage of a HIDiC column. The results obtained by Aspen Plus and CFD simulation showed the internal heat transfer in a concentric tray as a promissory configuration in order to decrease energy consumption in distillation processes.

  14. Vacuum distillation/vapor filtration water recovery

    NASA Technical Reports Server (NTRS)

    Honegger, R. J.; Neveril, R. B.; Remus, G. A.

    1974-01-01

    The development and evaluation of a vacuum distillation/vapor filtration (VD/VF) water recovery system are considered. As a functional model, the system converts urine and condensates waste water from six men to potable water on a steady-state basis. The system is designed for 180-day operating durations and for function on the ground, on zero-g aircraft, and in orbit. Preparatory tasks are summarized for conducting low gravity tests of a vacuum distillation/vapor filtration system for recovering water from urine.

  15. Preprototype Vapor Compression Distillation Subsystem development

    NASA Technical Reports Server (NTRS)

    Thompson, C. D.; Ellis, G. S.; Schubert, F. H.

    1981-01-01

    Vapor Compression Distillation (VCD) has evolved as the most promising approach to reclaim potable water from wastewater for future long-term manned space missions. Life Systems, Inc. (LSI), working with NASA, has developed a preprototype Vapor Compression Distillation Subsystem (VCDS) which processes wastewater at 1.4 kg/h. The preprototype unit weighs 143 kg, occupies a volume of 0.47 cu m, and will reclaim 96 percent of the available wastewater. This unit has been tested by LSI and is scheduled for further testing at NASA-JSC. This paper presents the preprototype VCDS design, configuration, performance data, test results and flight system projections.

  16. Distillate-fuel stability and cleanliness

    SciTech Connect

    Stavinoha, L.L.; Henry, C.P.

    1981-01-01

    A symposium was held in June 1980 to assess the state of the art and to define current and future needs for tests to predict and monitor the stability and cleanliness of distillate fuels (excluding aviation turbine fuels). Topics included appraisals of present-day distillate fuel stability and cleanliness, requirements for various applications, anticipated trends, future fuels, fuel distribution problems, microbiological contamination, test methods for stability and cleanliness, and refinery processes which improve stability. This publication contains the twelve papers that were presented at the Symposium. All papers have been abstracted and indexed.

  17. Petroleum fingerprinting: Effective identification of petroleum products at contaminated sites

    SciTech Connect

    Uhler, A.D.

    1997-07-01

    A critical issue in many environmental liability cases is the successful identification of the parties responsible for petroleum products that contaminate sites or properties. Identification of these parties is critical for owners of petroleum contaminated sites who are seeking to spread liability by identifying previous owners or operators of nearby properties who may be the source of, and thus be responsible for, the petroleum contamination at these sites. This issue is also critical for these potential defendants who will seek to demonstrate that the petroleum products associated with their activities could not be the source of the contamination in question. Finally, the issue is critical in situations where multiple responsible parties seek to equitably allocate among themselves shares of contamination and associated clean-up costs.

  18. Simplex Optimization of Headspace-Enrichment Conditions of Residual Petroleum Distillates Used by Arsonists

    ERIC Educational Resources Information Center

    Warnke, Molly M.; Erickson, Angela E.; Smith, Eugene T.

    2005-01-01

    A forensic project is described that is suitable for an undergraduate instrumental methods lab. Accelerants commonly used by arsonists are analyzed by static headspace enrichment followed by gas chromatography. The conditions used for headspace enrichment (e.g., time and temperature) are known to influence the distribution of hydrocarbons…

  19. 21 CFR 178.3710 - Petroleum wax.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Petroleum wax. 178.3710 Section 178.3710 Food and... and Production Aids § 178.3710 Petroleum wax. Petroleum wax may be safely used as a component of nonfood articles in contact with food, in accordance with the following conditions: (a) Petroleum wax is...

  20. 21 CFR 172.886 - Petroleum wax.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Petroleum wax. 172.886 Section 172.886 Food and... Multipurpose Additives § 172.886 Petroleum wax. Petroleum wax may be safely used in or on food, in accordance with the following conditions: (a) Petroleum wax is a mixture of solid hydrocarbons, paraffinic...

  1. 31 CFR 561.319 - Petroleum products.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Petroleum products. 561.319 Section... Definitions § 561.319 Petroleum products. The term petroleum products includes unfinished oils, liquefied petroleum gases, pentanes plus, aviation gasoline, motor gasoline, naphtha-type jet fuel, kerosene-type...

  2. 31 CFR 561.319 - Petroleum products.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Petroleum products. 561.319 Section... Definitions § 561.319 Petroleum products. The term petroleum products includes unfinished oils, liquefied petroleum gases, pentanes plus, aviation gasoline, motor gasoline, naphtha-type jet fuel, kerosene-type...

  3. 31 CFR 561.319 - Petroleum products.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Petroleum products. 561.319 Section... Definitions § 561.319 Petroleum products. The term petroleum products includes unfinished oils, liquefied petroleum gases, pentanes plus, aviation gasoline, motor gasoline, naphtha-type jet fuel, kerosene-type...

  4. 21 CFR 178.3710 - Petroleum wax.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Petroleum wax. 178.3710 Section 178.3710 Food and... and Production Aids § 178.3710 Petroleum wax. Petroleum wax may be safely used as a component of nonfood articles in contact with food, in accordance with the following conditions: (a) Petroleum wax is...

  5. 21 CFR 178.3710 - Petroleum wax.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Petroleum wax. 178.3710 Section 178.3710 Food and... and Production Aids § 178.3710 Petroleum wax. Petroleum wax may be safely used as a component of nonfood articles in contact with food, in accordance with the following conditions: (a) Petroleum wax is...

  6. 21 CFR 178.3710 - Petroleum wax.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Petroleum wax. 178.3710 Section 178.3710 Food and... Petroleum wax. Petroleum wax may be safely used as a component of nonfood articles in contact with food, in accordance with the following conditions: (a) Petroleum wax is a mixture of solid hydrocarbons, paraffinic...

  7. 21 CFR 172.886 - Petroleum wax.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Petroleum wax. 172.886 Section 172.886 Food and... Multipurpose Additives § 172.886 Petroleum wax. Petroleum wax may be safely used in or on food, in accordance with the following conditions: (a) Petroleum wax is a mixture of solid hydrocarbons, paraffinic...

  8. 21 CFR 172.886 - Petroleum wax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Petroleum wax. 172.886 Section 172.886 Food and... Multipurpose Additives § 172.886 Petroleum wax. Petroleum wax may be safely used in or on food, in accordance with the following conditions: (a) Petroleum wax is a mixture of solid hydrocarbons, paraffinic...

  9. 21 CFR 178.3710 - Petroleum wax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Petroleum wax. 178.3710 Section 178.3710 Food and... and Production Aids § 178.3710 Petroleum wax. Petroleum wax may be safely used as a component of nonfood articles in contact with food, in accordance with the following conditions: (a) Petroleum wax is...

  10. 21 CFR 172.886 - Petroleum wax.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Petroleum wax. 172.886 Section 172.886 Food and... Multipurpose Additives § 172.886 Petroleum wax. Petroleum wax may be safely used in or on food, in accordance with the following conditions: (a) Petroleum wax is a mixture of solid hydrocarbons, paraffinic...

  11. PETROLEUM PRODUCTS, PROPERTIES, QUALITY, APPLICATION,

    DTIC Science & Technology

    The document contains Chapters 7-10 of a Russian handbook of petroleum products. These chapters discuss drive-train oils, lubricating oils for aviation gas-turbine engines, industrial oils, and insulating oils.

  12. Chemical composition of distillers grains, a review

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In recent years, increasing demand for ethanol as a fuel additive and decreasing dependency on fossil fuels have resulted in a dramatic increase in the amount of grains used for ethanol production. Dry-grind is the major process, resulting in distillers dried grains with solubles (DDGS) as a major ...

  13. Holoprosencephaly: A mythologic and teratologic distillate.

    PubMed

    Cohen, M Michael

    2010-02-15

    This review of holoprosencephaly provides a mythologic and teratologic distillate of the subject under the following headings: Babylonian tablets; Greek mythology; pictures from the 16th through the 20th Centuries; 19th Century teratology; history of more modern concepts and their terminologies; and ocean-going ships named "Cyclops."

  14. 7 CFR 58.331 - Starter distillate.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Quality Specifications for Raw Material § 58.331 Starter distillate. The refined flavor components when used to flavor butter and related products. It shall be of food grade quality, free of extraneous material and prepared in accordance...

  15. 7 CFR 58.331 - Starter distillate.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Quality Specifications for Raw Material § 58.331 Starter distillate. The refined flavor components when used to flavor butter and related products. It shall be of food grade quality, free of extraneous material and prepared in accordance...

  16. 7 CFR 58.331 - Starter distillate.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Quality Specifications for Raw Material § 58.331 Starter distillate. The refined flavor components when used to flavor butter and related products. It shall be of food grade quality, free of extraneous material and prepared in accordance...

  17. 7 CFR 58.331 - Starter distillate.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Quality Specifications for Raw Material § 58.331 Starter distillate. The refined flavor components when used to flavor butter and related products. It shall be of food grade quality, free of extraneous material and prepared in accordance...

  18. 7 CFR 58.331 - Starter distillate.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Quality Specifications for Raw Material § 58.331 Starter distillate. The refined flavor components when used to flavor butter and related products. It shall be of food grade quality, free of extraneous material and prepared in accordance...

  19. Distillation Calculations with a Programmable Calculator.

    ERIC Educational Resources Information Center

    Walker, Charles A.; Halpern, Bret L.

    1983-01-01

    Describes a three-step approach for teaching multicomponent distillation to undergraduates, emphasizing patterns of distribution as an aid to understanding the separation processes. Indicates that the second step can be carried out by programmable calculators. (A more complete set of programs for additional calculations is available from the…

  20. Thermal conductivity and electrical properties of hybrid SiO2-graphene naphthenic mineral oil nanofluid as potential transformer oil

    NASA Astrophysics Data System (ADS)

    Qing, Soo Hui; Rashmi, W.; Khalid, M.; Gupta, T. C. S. M.; Nabipoor, M.; Taghi Hajibeigy, Mohammad

    2017-01-01

    Hybrid SiO2-graphene nanoparticles were synthesised by sol gel centrifugation technique under four different pH levels ranging from 9 to 12. Stability, thermal conductivity, viscosity and electrical conductivity of hybrid SiO2-graphene and pure graphene dispersed in naphthenic oil were investigated. Nanofluids were synthesied at three different nanoparticle concentrations (0.01, 0.04 and 0.08 wt%) while the temperature was varied from 20 °C to 100 °C. Field emission scanning electron microscopy (FESEM), x-ray spectroscopy and Fourier transform infrared (FTIR) spectrometer show successful coating of SiO2 on graphene surface. The growth units and size distribution of SiO2 nanoparticles increased with pH level. Moreover, the presence of SiO2 improved the dispersion behaviour of the nanofluid as confirmed by visual observation and UV–Vis studies. Zeta potential measurements show the hybrid nanofluids at pH 11 are most stable due to its optimum amount and size of SiO2 coated on graphene surface while at pH 12 shows least stability due to precipitation. The presence of SiO2 on graphene further enhanced the thermal conductivity by 80% at pH 9. Also, the viscosity of hybrid nanofluids was higher than pure graphene based nanofluids due to increase in density and particle size. Moreover, the addition of hybrid SiO2-graphene nanoparticles significantly reduced the electrical conductivity enhancement of base fluid from 557% to 97%.

  1. In vitro assessment of endocrine disrupting potential of naphthenic Acid fractions derived from oil sands-influenced water.

    PubMed

    Leclair, Liane A; Pohler, Lani; Wiseman, Steve B; He, Yuhe; Arens, Collin J; Giesy, John P; Scully, Stephen; Wagner, Brian D; van den Heuvel, Michael R; Hogan, Natacha S

    2015-05-05

    Oil sands-influenced process waters have been observed to cause reproductive effects and to induced CYP1A activity in fishes; however, little progress has been made in determining causative agents. Naphthenic acids (NAs) are the predominant organic compounds in process-affected waters, but due to the complexity of the mixture, it has been difficult to examine causal linkages in fishes. The aim of this study was to use in vitro assays specific to reproductive and CYP1A mechanisms to determine if specific acid extractable fractions of NAs obtained from oil sands-influenced water are active toward reproductive processes or interact with the Ah receptor responsible for CYP1A activity. NAs were extracted from aged oil sands-influenced waters by use of acid precipitation, and the mixture was fractionated into three acidic and one neutral fraction. The four fractions were examined for Ah receptor-mediated potency by use of the H4IIE-luc bioassay, effects on production of steroid hormones by use of the H295R steroidogenesis assay, and sex steroid receptor binding activity using the yeast estrogen screen and yeast androgen screen. The mixtures were characterized by high resolution mass spectrometry, (1)H nuclear magnetic resonance, and attenuated total reflectance infrared spectroscopy. The neutral fraction elicited Ah-receptor mediated activity after 24 h but not after 48 or 72 h. None of the fractions contained measurable levels of estrogen or androgen receptor agonists nor did they cause reductions in steroidogenesis. A number of fractions showed antiestrogenic or antiandrogenicity potency, with the neutral and main acidic fractions being the most potent. Neutral aromatic compounds are likely responsible for the CYP1A activity observed. Direct estrogenic, androgenic, or steroidogenic mechanisms are unlikely for NAs based on these results, but NAs act as potent antiandrogen or antiestrogens.

  2. Microbial biodegradation of aromatic alkanoic naphthenic acids is affected by the degree of alkyl side chain branching

    PubMed Central

    Johnson, Richard J; Smith, Ben E; Sutton, Paul A; McGenity, Terry J; Rowland, Steven J; Whitby, Corinne

    2011-01-01

    Naphthenic acids (NAs) occur naturally in oil sands and enter the environment through natural and anthropogenic processes. NAs comprise toxic carboxylic acids that are difficult to degrade. Information on NA biodegradation mechanisms is limited, and there are no studies on alkyl branched aromatic alkanoic acid biodegradation, despite their contribution to NA toxicity and recalcitrance. Increased alkyl side chain branching has been proposed to explain NA recalcitrance. Using soil enrichments, we examined the biodegradation of four aromatic alkanoic acid isomers that differed in alkyl side chain branching: (4′-n-butylphenyl)-4-butanoic acid (n-BPBA, least branched); (4′-iso-butylphenyl)-4-butanoic acid (iso-BPBA); (4′-sec-butylphenyl)-4-butanoic acid (sec-BPBA) and (4′-tert-butylphenyl)-4-butanoic acid (tert-BPBA, most branched). n-BPBA was completely metabolized within 49 days. Mass spectral analysis confirmed that the more branched isomers iso-, sec- and tert-BPBA were transformed to their butylphenylethanoic acid (BPEA) counterparts at 14 days. The BPEA metabolites were generally less toxic than BPBAs as determined by Microtox assay. n-BPEA was further transformed to a diacid, showing that carboxylation of the alkyl side chain occurred. In each case, biodegradation of the carboxyl side chain proceeded through beta-oxidation, which depended on the degree of alkyl side chain branching, and a BPBA degradation pathway is proposed. Comparison of 16S rRNA gene sequences at days 0 and 49 showed an increase and high abundance at day 49 of Pseudomonas (sec-BPBA), Burkholderia (n-, iso-, tert-BPBA) and Sphingomonas (n-, sec-BPBA). PMID:20962873

  3. Aerobic biotransformation of alkyl branched aromatic alkanoic naphthenic acids via two different pathways by a new isolate of Mycobacterium.

    PubMed

    Johnson, Richard J; West, Charles E; Swaih, Aisha M; Folwell, Ben D; Smith, Ben E; Rowland, Steven J; Whitby, Corinne

    2012-04-01

    Naphthenic acids (NAs) are complex mixtures of carboxylic acids found in weathered crude oils and oil sands, and are toxic, corrosive and persistent. However, little is known about the microorganisms and mechanisms involved in NA degradation. We isolated a sediment bacterium (designated strain IS2.3), with 100% 16S rRNA gene sequence identity to Mycobacterium aurum, which degraded synthetic NAs (4'-n-butylphenyl)-4-butanoic acid (n-BPBA) and (4'-t-butylphenyl)-4-butanoic acid (t-BPBA). n-BPBA was readily oxidized with almost complete degradation (96.8% ± 0.3) compared with t-BPBA (77.8% ± 3.7 degraded) by day 49. Cell counts increased fourfold by day 14 but decreased after day 14 for both n- and t-BPBA. At day 14, (4'-butylphenyl)ethanoic acid (BPEA) metabolites were detected. Additional metabolites produced during t-BPBA degradation were identified by mass spectrometry of derivatives as (4'-carboxy-t-butylphenyl)-4-butanoic acid and (4'-carboxy-t-butylphenyl)ethanoic acid; suggesting that strain IS2.3 used omega oxidation of t-BPEA to oxidize the tert-butyl side-chain to produce (4'-carboxy-t-butylphenyl)ethanoic acid, as the primary route for biodegradation. However, strain IS2.3 also produced this metabolite through initial omega oxidation of the tert-butyl side-chain of t-BPBA, followed by beta-oxidation of the alkanoic acid side-chain. In conclusion, an isolate belonging to the genus Mycobacterium degraded highly branched aromatic NAs via two different pathways.

  4. Microbial biodegradation of aromatic alkanoic naphthenic acids is affected by the degree of alkyl side chain branching.

    PubMed

    Johnson, Richard J; Smith, Ben E; Sutton, Paul A; McGenity, Terry J; Rowland, Steven J; Whitby, Corinne

    2011-03-01

    Naphthenic acids (NAs) occur naturally in oil sands and enter the environment through natural and anthropogenic processes. NAs comprise toxic carboxylic acids that are difficult to degrade. Information on NA biodegradation mechanisms is limited, and there are no studies on alkyl branched aromatic alkanoic acid biodegradation, despite their contribution to NA toxicity and recalcitrance. Increased alkyl side chain branching has been proposed to explain NA recalcitrance. Using soil enrichments, we examined the biodegradation of four aromatic alkanoic acid isomers that differed in alkyl side chain branching: (4'-n-butylphenyl)-4-butanoic acid (n-BPBA, least branched); (4'-iso-butylphenyl)-4-butanoic acid (iso-BPBA); (4'-sec-butylphenyl)-4-butanoic acid (sec-BPBA) and (4'-tert-butylphenyl)-4-butanoic acid (tert-BPBA, most branched). n-BPBA was completely metabolized within 49 days. Mass spectral analysis confirmed that the more branched isomers iso-, sec- and tert-BPBA were transformed to their butylphenylethanoic acid (BPEA) counterparts at 14 days. The BPEA metabolites were generally less toxic than BPBAs as determined by Microtox assay. n-BPEA was further transformed to a diacid, showing that carboxylation of the alkyl side chain occurred. In each case, biodegradation of the carboxyl side chain proceeded through beta-oxidation, which depended on the degree of alkyl side chain branching, and a BPBA degradation pathway is proposed. Comparison of 16S rRNA gene sequences at days 0 and 49 showed an increase and high abundance at day 49 of Pseudomonas (sec-BPBA), Burkholderia (n-, iso-, tert-BPBA) and Sphingomonas (n-, sec-BPBA).

  5. Petroleum coke adsorption as a water management option for oil sands process-affected water.

    PubMed

    Zubot, Warren; MacKinnon, Michael D; Chelme-Ayala, Pamela; Smith, Daniel W; Gamal El-Din, Mohamed

    2012-06-15

    Water is integral to both operational and environmental aspects of the oil sands industry. A water treatment option based on the use of petroleum coke (PC), a by-product of bitumen upgrading, was examined as an opportunity to reduce site oil sands process-affected water (OSPW) inventories and net raw water demand. Changes in OSPW quality when treated with PC included increments in pH levels and concentrations of vanadium, molybdenum, and sulphate. Constituents that decreased in concentration after PC adsorption included total acid-extractable organics (TAO), bicarbonate, calcium, barium, magnesium, and strontium. Changes in naphthenic acids (NAs) speciation were observed after PC adsorption. A battery of bioassays was used to measure the OSPW toxicity. The results indicated that untreated OSPW was toxic towards Vibrio fischeri and rainbow trout. However, OSPW treated with PC at appropriate dosages was not acutely toxic towards these test organisms. Removal of TAO was found to be an adsorption process, fitting the Langmuir and Langmuir-Freundlich isotherm models. For TAO concentrations of 60 mg/L, adsorption capacities ranged between 0.1 and 0.46 mg/g. This study demonstrates that freshly produced PC from fluid cokers provides an effective treatment of OSPW in terms of key constituents' removal and toxicity reduction.

  6. Reforming petroleum-based fuels for fuel cell vehicles : composition-performance relationships.

    SciTech Connect

    Kopasz, J. P.; Miller, L. E.; Ahmed, S.; Devlin, P. R.; Pacheco, M.

    2001-12-04

    Onboard reforming of petroleum-based fuels, such as gasoline, may help ease the introduction of fuel cell vehicles to the marketplace. Although gasoline can be reformed, it is optimized to meet the demands of ICEs. This optimization includes blending to increase the octane number and addition of oxygenates and detergents to control emissions. The requirements for a fuel for onboard reforming to hydrogen are quite different than those for combustion. Factors such as octane number and flame speed are not important; however, factors such as hydrogen density, catalyst-fuel interactions, and possible catalyst poisoning become paramount. In order to identify what factors are important in a hydrocarbon fuel for reforming to hydrogen and what factors are detrimental, we have begun a program to test various components of gasoline and blends of components under autothermal reforming conditions. The results indicate that fuel composition can have a large effect on reforming behavior. Components which may be beneficial for ICEs for their octane enhancing value were detrimental to reforming. Fuels with high aromatic and naphthenic content were more difficult to reform. Aromatics were also found to have an impact on the kinetics for reforming of paraffins. The effects of sulfur impurities were dependent on the catalyst. Sulfur was detrimental for Ni, Co, and Ru catalysts. Sulfur was beneficial for reforming with Pt catalysts, however, the effect was dependent on the sulfur concentration.

  7. Process for the preparation of hydrocarbon oil distillates

    SciTech Connect

    Kwant, P.B.; Newsome, J.R.

    1983-08-23

    Distillates are prepared from asphaltenes-rich feeds by a process comprising subjecting the feed to thermal cracking, and subjecting the distillation residue of the cracked product to a combination solvent deasphalting and catalytic hydroconversion.

  8. International petroleum statistics report

    SciTech Connect

    1996-05-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1084 through 1994.

  9. International petroleum statistics report

    SciTech Connect

    1996-10-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. Word oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  10. International petroleum statistics report

    SciTech Connect

    1995-11-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  11. International petroleum statistics report

    SciTech Connect

    1995-07-27

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  12. International petroleum statistics report

    SciTech Connect

    1997-07-01

    The International Petroleum Statistics Report is a monthly publication that provides current international data. The report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent 12 months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996.

  13. Interpolation of recurrence and hashing entanglement distillation protocols

    SciTech Connect

    Vollbrecht, Karl Gerd H.; Verstraete, Frank

    2005-06-15

    We construct interesting entanglement distillation protocols by interpolating between the recurrence and hashing protocols. This leads to asymptotic two-way distillation protocols, resulting in an improvement of the distillation rate for all mixed Bell diagonal entangled states, even for the ones with very high fidelity. We also present a method for how entanglement-assisted distillation protocol can be converted into nonentanglement-assisted protocols with the same yield.

  14. 27 CFR 24.183 - Use of distillates containing aldehydes.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... the fermentation of wine and then returned to the distilled spirits plant from which distillates were... fermentation of wine made from a different kind of fruit. Distillates containing aldehydes which are received... AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Production of Wine § 24.183 Use...

  15. 27 CFR 24.183 - Use of distillates containing aldehydes.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... the fermentation of wine and then returned to the distilled spirits plant from which distillates were... fermentation of wine made from a different kind of fruit. Distillates containing aldehydes which are received... AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Production of Wine § 24.183 Use...

  16. 27 CFR 24.183 - Use of distillates containing aldehydes.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... the fermentation of wine and then returned to the distilled spirits plant from which distillates were... fermentation of wine made from a different kind of fruit. Distillates containing aldehydes which are received... AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Production of Wine § 24.183 Use...

  17. 27 CFR 24.183 - Use of distillates containing aldehydes.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... the fermentation of wine and then returned to the distilled spirits plant from which distillates were... fermentation of wine made from a different kind of fruit. Distillates containing aldehydes which are received... AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Production of Wine § 24.183 Use...

  18. 27 CFR 24.183 - Use of distillates containing aldehydes.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... the fermentation of wine and then returned to the distilled spirits plant from which distillates were... fermentation of wine made from a different kind of fruit. Distillates containing aldehydes which are received... AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Production of Wine § 24.183 Use...

  19. 27 CFR 19.669 - Distilled spirits taxes.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Distilled spirits taxes. 19.669 Section 19.669 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Taxes § 19.669 Distilled spirits taxes. (a) Proprietors may withdraw distilled spirits free of tax...

  20. 40 CFR 721.9635 - Terpene residue distillates.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Terpene residue distillates. 721.9635... Substances § 721.9635 Terpene residue distillates. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as terpene residue distillates (PMN...

  1. 27 CFR 27.31 - Warehouse receipts covering distilled spirits.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Warehouse receipts... BEER Dealer Registration and Recordkeeping § 27.31 Warehouse receipts covering distilled spirits. The sale of warehouse receipts for distilled spirits is equivalent to the sale of distilled...

  2. Antioxidant activity of phytochemicals from dried distillers grain oil

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A distillate was obtained by molecular distillation of oil extracted from distiller’s dried grains (DDG). The dried distiller’s grains distillate (DDGD) contained phytosterols, steryl ferulates, tocopherols, tocotrienols, and carotenoids. DDGD was tested for its impact on the oxidative stability in...

  3. Antioxidant Activity of Phytochemicals from Dried Distillers Grain Oil

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A distillate was obtained by molecular distillation of oil extracted from distiller’s dried grains (DDG). The dried distiller’s grains distillate (DDGD) contained phytosterols, steryl ferulates, tocopherols, tocotrienols, and carotenoids. DDGD was tested for its impact on the oxidative stability i...

  4. Continuous and Batch Distillation in an Oldershaw Tray Column

    ERIC Educational Resources Information Center

    Silva, Carlos M.; Vaz, Raquel V.; Santiago, Ana S.; Lito, Patricia F.

    2011-01-01

    The importance of distillation in the separation field prompts the inclusion of distillation experiments in the chemical engineering curricula. This work describes the performance of an Oldershaw column in the rectification of a cyclohexane/n-heptane mixture. Total reflux distillation, continuous rectification under partial reflux, and batch…

  5. 7 CFR 160.9 - Destructively distilled wood turpentine.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Destructively distilled wood turpentine. 160.9 Section... REGULATIONS AND STANDARDS FOR NAVAL STORES General § 160.9 Destructively distilled wood turpentine. The designation “destructively distilled wood turpentine” shall refer to the kind of spirits of...

  6. 7 CFR 160.9 - Destructively distilled wood turpentine.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Destructively distilled wood turpentine. 160.9 Section... REGULATIONS AND STANDARDS FOR NAVAL STORES General § 160.9 Destructively distilled wood turpentine. The designation “destructively distilled wood turpentine” shall refer to the kind of spirits of...

  7. 7 CFR 160.9 - Destructively distilled wood turpentine.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Destructively distilled wood turpentine. 160.9 Section... REGULATIONS AND STANDARDS FOR NAVAL STORES General § 160.9 Destructively distilled wood turpentine. The designation “destructively distilled wood turpentine” shall refer to the kind of spirits of...

  8. 7 CFR 160.9 - Destructively distilled wood turpentine.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Destructively distilled wood turpentine. 160.9 Section... REGULATIONS AND STANDARDS FOR NAVAL STORES General § 160.9 Destructively distilled wood turpentine. The designation “destructively distilled wood turpentine” shall refer to the kind of spirits of...

  9. 7 CFR 160.9 - Destructively distilled wood turpentine.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Destructively distilled wood turpentine. 160.9 Section... REGULATIONS AND STANDARDS FOR NAVAL STORES General § 160.9 Destructively distilled wood turpentine. The designation “destructively distilled wood turpentine” shall refer to the kind of spirits of...

  10. Petroleum biodegradation in marine environments.

    PubMed

    Harayama, S; Kishira, H; Kasai, Y; Shutsubo, K

    1999-08-01

    Petroleum-based products are the major source of energy for industry and daily life. Petroleum is also the raw material for many chemical products such as plastics, paints, and cosmetics. The transport of petroleum across the world is frequent, and the amounts of petroleum stocks in developed countries are enormous. Consequently, the potential for oil spills is significant, and research on the fate of petroleum in a marine environment is important to evaluate the environmental threat of oil spills, and to develop biotechnology to cope with them. Crude oil is constituted from thousands of components which are separated into saturates, aromatics, resins and asphaltenes. Upon discharge into the sea, crude oil is subjected to weathering, the process caused by the combined effects of physical, chemical and biological modification. Saturates, especially those of smaller molecular weight, are readily biodegraded in marine environments. Aromatics with one, two or three aromatic rings are also efficiently biodegraded; however, those with four or more aromatic ring are quite resistant to biodegradation. The asphaltene and resin fractions contain higher molecular weight compounds whose chemical structures have not yet been resolved. The biodegradability of these compounds is not yet known. It is known that the concentrations of available nitrogen and phosphorus in seawater limit the growth and activities of hydrocarbon-degrading microorganisms in a marine environment. In other words, the addition of nitrogen and phosphorus fertilizers to an oil-contaminated marine environment can stimulate the biodegradation of spilled oil. This notion was confirmed in the large-scale operation for bioremediation after the oil spill from the Exxon Valdez in Alaska. Many microorganisms capable of degrading petroleum components have been isolated. However, few of them seem to be important for petroleum biodegradation in natural environments. One group of bacteria belonging to the genus

  11. Report to Congress on the feasibility of establishing a heating oil component to the Strategic Petroleum Reserve. Volume 2: Appendices

    SciTech Connect

    1998-06-01

    Nine appendices to the main report are included in this volume. They are: Northeastern US distillate supply systems; New England fuel oil storage capacities and inventories; Characteristics of the northeast natural gas market; Documentation of statistical models and calculation of benefits; Regional product reserve study; Other countries` experience with refined product storage; Global refining supply demand appraisal; Summary of federal authorities relevant to the establishment of petroleum product reserves; Product stability and turnover requirements.

  12. Comparison of Advanced Distillation Control Methods, Final Technical Report

    SciTech Connect

    Dr. James B. Riggs

    2000-11-30

    Detailed dynamic simulations of three industrial distillation columns (a propylene/propane splitter, a xylene/toluene column, and a depropanizer) have been used to evaluate configuration selections for single-ended and dual-composition control, as well as to compare conventional and advanced control approaches. In addition, a simulator of a main fractionator was used to compare the control performance of conventional and advanced control. For each case considered, the controllers were tuned by using setpoint changes and tested using feed composition upsets. Proportional Integral (PI) control performance was used to evaluate the configuration selection problem. For single ended control, the energy balance configuration was found to yield the best performance. For dual composition control, nine configurations were considered. It was determined that the use of dynamic simulations is required in order to identify the optimum configuration from among the nine possible choices. The optimum configurations were used to evaluate the relative control performance of conventional PI controllers, MPC (Model Predictive Control), PMBC (Process Model-Based Control), and ANN (Artificial Neural Networks) control. It was determined that MPC works best when one product is much more important than the other, while PI was superior when both products were equally important. PMBC and ANN were not found to offer significant advantages over PI and MPC. MPC was found to outperform conventional PI control for the main fractionator. MPC was applied to three industrial columns: one at Phillips Petroleum and two at Union Carbide. In each case, MPC was found to significantly outperform PI controls. The major advantage of the MPC controller is its ability to effectively handle a complex set of constraints and control objectives.

  13. Nonlocal distillation based on multisetting Bell inequality

    NASA Astrophysics Data System (ADS)

    Ye, Xiang-Jun; Deng, Dong-Ling; Chen, Jing-Ling

    2012-12-01

    Inspired by the recent works of Foster [Phys. Rev. Lett.0031-900710.1103/PhysRevLett.102.120401 102, 120401 (2009)] and Brunner [Phys. Rev. Lett.0031-900710.1103/PhysRevLett.102.160403 102, 160403 (2009)], we present a nonlocality distillation protocol for two three-level (qutrit) systems in the framework of generalized nonsignaling theories. Our protocol is based on a three-setting Bell inequality. It works efficiently for a specific class of three-input-three-output nonlocal boxes. In the asymptotic limit, all these nonlocal boxes can be distilled to the maximally nonlocal box defined by the inequality and nonsignaling constraints. Then we introduce a contracting protocol that reduces these boxes to the so-called “correlated nonlocal boxes.” As a result, our three-input-three-output nonlocal boxes also make communication complexity trivial and appear very unlikely to exist in nature.

  14. Contact structure for use in catalytic distillation

    DOEpatents

    Jones, Jr., Edward M.

    1985-01-01

    A method and apparatus for conducting catalytic chemical reactions and fractionation of the reaction mixture, comprising and feeding reactants into a distillation column reactor contracting said reactant in a liquid phase with a fixed bed catalyst in the form of a contact catalyst structure, consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column.

  15. Contact structure for use in catalytic distillation

    DOEpatents

    Jones, E.M. Jr.

    1985-08-20

    A method and apparatus are disclosed for conducting catalytic chemical reactions and fractionation of the reaction mixture, comprising and feeding reactants into a distillation column reactor contracting said reactant in a liquid phase with a fixed bed catalyst in the form of a contact catalyst structure, consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column. 7 figs.

  16. Contact structure for use in catalytic distillation

    DOEpatents

    Jones, E.M. Jr.

    1984-03-27

    A method is described for conducting catalytic chemical reactions and fractionation of the reaction mixture comprising feeding reactants into a distillation column reactor, contracting said reactant in liquid phase with a fixed bed catalyst in the form of a contact catalyst structure consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column. 7 figs.

  17. Contact structure for use in catalytic distillation

    DOEpatents

    Jones, Jr., Edward M.

    1984-01-01

    A method for conducting catalytic chemical reactions and fractionation of the reaction mixture comprising feeding reactants into a distillation column reactor contracting said reactant in liquid phase with a fixed bed catalyst in the form of a contact catalyst structure consisting of closed porous containers containing the catatlyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column.

  18. Petroleum-collecting and dispersing complexes based on oleic acid and nitrogenous compounds as surface-active agents for removing thin petroleum films from water surface.

    PubMed

    Asadov, Ziyafaddin H; Tantawy, Ahmed H; Zarbaliyeva, Ilhama A; Rahimov, Ravan A

    2012-01-01

    Petroleum-collecting and dispersing complexes were synthesized on the basis of oleic acid and nitrogen-containing compounds. Surface-active properties (interfacial tension) of the obtained complexes were investigated by stalagmometric method. Petroleum-collecting and dispersing properties of the oleic acid complexes in diluted (5% wt. water or alcoholic solution) and undiluted form have been studied in waters of varying salinity (distilled, fresh and sea waters). Some of physico-chemical indices of the prepared compounds such as solubility, acid and amine numbers as well as electrical conductivity have been determined. The ability of oleic acid complex with ethylenediamine as petro-collecting and dispersing agent towards different types of petroleum has been studied. The influence of thickness and "age" of the petroleum slick on collecting and dispersing capacity of this complex has been clarified. Surface properties studied included critical micelle concentration (CMC), maximum surface excess (Γ(max)), and minimum surface area (A(min)). Free energies of micellization (ΔG°(mic)) and adsorption (ΔG°(ads)) were calculated.

  19. Photothermal Membrane Distillation for Seawater Desalination.

    PubMed

    Politano, Antonio; Argurio, Pietro; Di Profio, Gianluca; Sanna, Vanna; Cupolillo, Anna; Chakraborty, Sudip; Arafat, Hassan A; Curcio, Efrem

    2017-01-01

    Thermoplasmonic effects notably improve the efficiency of vacuum membrane distillation, an economically sustainable tool for high-quality seawater desalination. Poly(vinylidene fluoride) (PVDF) membranes filled with spherical silver nanoparticles are used, whose size is tuned for the aim. With the addition of plasmonic nanoparticles in the membrane, the transmembrane flux increases by 11 times, and, moreover, the temperature at the membrane interface is higher than bulk temperature.

  20. Qutrit Magic State Distillation Tight in Some Directions.

    PubMed

    Dawkins, Hillary; Howard, Mark

    2015-07-17

    Magic state distillation is a crucial component in the leading approaches to implementing universal fault-tolerant quantum computation, with existing protocols for both qubit and higher dimensional systems. Early work focused on determining the region of distillable states for qubit protocols; yet comparatively little is known about which states can be distilled and with what distillable region for d>2. Here we focus on d=3 and present new four-qutrit distillation schemes that improve upon the known distillable region, and achieve distillation tight to the boundary of undistillable states for some classes of state. As a consequence of recent results, this implies that there is a family of quantum states that enable universality if and only if they exhibit contextuality with respect to stabilizer measurements. We also identify a new routine whose fixed point is a magic state with maximal sum negativity; i.e., it is maximally nonstablizer in a specific sense.

  1. Secret key distillation from shielded two-qubit states

    SciTech Connect

    Bae, Joonwoo

    2010-05-15

    The quantum states corresponding to a secret key are characterized using the so-called private states, where the key part consisting of a secret key is shielded by the additional systems. Based on the construction, it was shown that a secret key can be distilled from bound entangled states. In this work, I consider the shielded two-qubit states in a key-distillation scenario and derive the conditions under which a secret key can be distilled using the recurrence protocol or the two-way classical distillation, advantage distillation together with one-way postprocessing. From the security conditions, it is shown that a secret key can be distilled from bound entangled states in a much wider range. In addition, I consider the case that in which white noise is added to quantum states and show that the classical distillation protocol still works despite a certain amount of noise although the recurrence protocol does not.

  2. Attractor mechanism as a distillation procedure

    SciTech Connect

    Levay, Peter; Szalay, Szilard

    2010-07-15

    In a recent paper it was shown that for double extremal static spherical symmetric BPS black hole solutions in the STU model the well-known process of moduli stabilization at the horizon can be recast in a form of a distillation procedure of a three-qubit entangled state of a Greenberger-Horne-Zeilinger type. By studying the full flow in moduli space in this paper we investigate this distillation procedure in more detail. We introduce a three-qubit state with amplitudes depending on the conserved charges, the warp factor, and the moduli. We show that for the recently discovered non-BPS solutions it is possible to see how the distillation procedure unfolds itself as we approach the horizon. For the non-BPS seed solutions at the asymptotically Minkowski region we are starting with a three-qubit state having seven nonequal nonvanishing amplitudes and finally at the horizon we get a Greenberger-Horne-Zeilinger state with merely four nonvanishing ones with equal magnitudes. The magnitude of the surviving nonvanishing amplitudes is proportional to the macroscopic black hole entropy. A systematic study of such attractor states shows that their properties reflect the structure of the fake superpotential. We also demonstrate that when starting with the very special values for the moduli corresponding to flat directions the uniform structure at the horizon deteriorates due to errors generalizing the usual bit flips acting on the qubits of the attractor states.

  3. Distillation Designs for the Lunar Surface

    NASA Technical Reports Server (NTRS)

    Boul, Peter J.; Lange,Kevin E.; Conger, Bruce; Anderson, Molly

    2010-01-01

    Gravity-based distillation methods may be applied to the purification of wastewater on the lunar base. These solutions to water processing are robust physical separation techniques, which may be more advantageous than many other techniques for their simplicity in design and operation. The two techniques can be used in conjunction with each other to obtain high purity water. The components and feed compositions for modeling waste water streams are presented in conjunction with the Aspen property system for traditional stage distillation. While the individual components for each of the waste streams will vary naturally within certain bounds, an analog model for waste water processing is suggested based on typical concentration ranges for these components. Target purity levels for recycled water are determined for each individual component based on NASA s required maximum contaminant levels for potable water Optimum parameters such as reflux ratio, feed stage location, and processing rates are determined with respect to the power consumption of the process. Multistage distillation is evaluated for components in wastewater to determine the minimum number of stages necessary for each of 65 components in humidity condensate and urine wastewater mixed streams.

  4. Microfluidic distillation chip for methanol concentration detection.

    PubMed

    Wang, Yao-Nan; Liu, Chan-Chiung; Yang, Ruey-Jen; Ju, Wei-Jhong; Fu, Lung-Ming

    2016-03-17

    An integrated microfluidic distillation system is proposed for separating a mixed ethanol-methanol-water solution into its constituent components. The microfluidic chip is fabricated using a CO2 laser system and comprises a serpentine channel, a boiling zone, a heating zone, and a cooled collection chamber filled with de-ionized (DI) water. In the proposed device, the ethanol-methanol-water solution is injected into the microfluidic chip and driven through the serpentine channel and into the collection chamber by means of a nitrogen carrier gas. Following the distillation process, the ethanol-methanol vapor flows into the collection chamber and condenses into the DI water. The resulting solution is removed from the collection tank and reacted with a mixed indicator. Finally, the methanol concentration is inversely derived from the absorbance measurements obtained using a spectrophotometer. The experimental results show the proposed microfluidic system achieves an average methanol distillation efficiency of 97%. The practicality of the proposed device is demonstrated by detecting the methanol concentrations of two commercial fruit wines. It is shown that the measured concentration values deviate by no more than 3% from those obtained using a conventional bench top system.

  5. The distillation and volatility of ionic liquids.

    PubMed

    Earle, Martyn J; Esperança, José M S S; Gilea, Manuela A; Lopes, José N Canongia; Rebelo, Luís P N; Magee, Joseph W; Seddon, Kenneth R; Widegren, Jason A

    2006-02-16

    It is widely believed that a defining characteristic of ionic liquids (or low-temperature molten salts) is that they exert no measurable vapour pressure, and hence cannot be distilled. Here we demonstrate that this is unfounded, and that many ionic liquids can be distilled at low pressure without decomposition. Ionic liquids represent matter solely composed of ions, and so are perceived as non-volatile substances. During the last decade, interest in the field of ionic liquids has burgeoned, producing a wealth of intellectual and technological challenges and opportunities for the production of new chemical and extractive processes, fuel cells and batteries, and new composite materials. Much of this potential is underpinned by their presumed involatility. This characteristic, however, can severely restrict the attainability of high purity levels for ionic liquids (when they contain poorly volatile components) in recycling schemes, as well as excluding their use in gas-phase processes. We anticipate that our demonstration that some selected families of commonly used aprotic ionic liquids can be distilled at 200-300 degrees C and low pressure, with concomitant recovery of significant amounts of pure substance, will permit these currently excluded applications to be realized.

  6. Isolation and estimation of the 'aromatic' naphthenic acid content of an oil sands process-affected water extract.

    PubMed

    Jones, David; West, Charles E; Scarlett, Alan G; Frank, Richard A; Rowland, Steven J

    2012-07-20

    The naphthenic acids of oil sands process-affected water (OSPW) are said to be important toxicants. The major acids are stated to have alicyclic structures and recently, numerous of these have been identified, but some evidence suggests 'aromatic' acids are also present. The proportions of such acids have not been reported because they exist in so-called supercomplex mixtures with the alicyclic species. Their contribution to the toxicity of OSPW, if any, is therefore unknown. Here we report the use of multidimensional comprehensive gas chromatography-mass spectrometry (GC×GC-MS) with polar first dimension and non-polar second dimension GC columns and argentation solid phase extraction, to separate methyl esters of the acids of an OSPW supercomplex, into distinct fractions. A major fraction (ca 70%) was shown to contain acids (methyl esters) previously identified as alicyclic species. Authentic adamantane acid methyl esters were shown to chromatograph in this fraction. This fraction was isolated by argentation solid phase extraction (SPE) by elution with hexane. GC-MS and GC×GC-MS confirmed this to be the major fraction in the original supercomplex containing alicyclic acids (methyl esters). A second fraction shown to contain monoaromatic acids (methyl esters) by GC×GC-MS was unexpectedly abundant (ca 30% relative to the acyclic acids). The naphtheno-aromatic dehydroabietic acid was confirmed by co-injection with an authentic compound and several acids previously tentatively identified as naphtheno-monoaromatics were present. This fraction was isolated by argentation SPE by elution with more polar 5% diethyl ether in hexane. GC-MS and GC×GC-MS confirmed that the fraction represented a significant proportion of the original supercomplex. A further fraction, eluting from the argentation SPE column with more 5% diethyl ether in hexane in the same retention volume as authentic methyl naphthoate, contained, in addition to some of the second fraction, a third, much

  7. Biological Remediation of Petroleum Contaminants

    NASA Astrophysics Data System (ADS)

    Kuhad, Ramesh Chander; Gupta, Rishi

    Large volumes of hazardous wastes are generated in the form of oily sludges and contaminated soils during crude oil transportation and processing. Although many physical, chemical and biological treatment technologies are available for petroleum contaminants petroleum contaminants in soil, biological methods have been considered the most cost-effective. Practical biological remediation methods typically involve direct use of the microbes naturally occurring in the contaminated environment and/or cultured indigenous or modified microorganisms. Environmental and nutritional factors, including the properties of the soil, the chemical structure of the hydrocarbon(s), oxygen, water, nutrient availability, pH, temperature, and contaminant bioavailability, can significantly affect the rate and the extent of hydrocarbon biodegradation hydrocarbon biodegradation by microorganisms in contaminated soils. This chapter concisely discusses the major aspects of bioremediation of petroleum contaminants.

  8. Petroleum 1996 - issues and trends

    SciTech Connect

    1997-09-01

    Increasingly, users of the Energy Information Administration`s petroleum data and analytical reports have expressed an interest in a recurring report that takes a broad view of the petroleum sector. What is sought is some perspective on the complex interrelationships that comprise an industry and markets accounting for 40 percent of the energy consumed in the United States and ranging from the drilling rig in the oil field to the pump at the local gasoline station. This report comprehensively examines historical trends, and selectively focuses on major issues and the events they represent. It analyzes different dimensions of the industry and related markets in terms of how they relate to a common theme, in this case, the volatility in petroleum markets.

  9. 46 CFR 148.04-15 - Petroleum coke, uncalcined; petroleum coke, uncalcined and calcined (mixture).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Petroleum coke, uncalcined; petroleum coke, uncalcined and calcined (mixture). 148.04-15 Section 148.04-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND... Requirements for Certain Material § 148.04-15 Petroleum coke, uncalcined; petroleum coke, uncalcined...

  10. Petroleum supply annual 1995: Volume 1

    SciTech Connect

    1996-05-01

    The {ital Petroleum Supply Annual} contains information on supply and disposition of crude oil and petroleum products. It reflects data collected from the petroleum industry during 1995 through monthly surveys, and it is divided into 2 volumes. This volume contains three sections: summary statistics, detailed statistics, and selected refinery statistics, each with final annual data. (The other volume contains final statistics for each month and replaces data previously published in the {ital Petroleum Supply Monthly}).

  11. The Second Colloquium on Petroleum Engineering Education

    SciTech Connect

    Willhite, G.P.; Forney, R.H.

    1993-11-30

    This paper describes findings from the Second Colloquium on Petroleum engineering Education. The purpose of this colloquium was to provide a forum for petroleum engineering educators and representatives from industry and government to explore critical issues facing petroleum engineering education as we move into the 21st Century. It was expected that the colloquium would identify areas where changes are needed in petroleum engineering education, to best prepare students for careers in the oil and gas industry or other, related industries.

  12. FRACTURED PETROLEUM RESERVOIRS

    SciTech Connect

    Abbas Firoozabadi

    1999-06-11

    different from that of gas displacement processes. The work is of experimental nature and clarifies several misconceptions in the literature. Based on experimental results, it is established that the main reason for high efficiency of solution gas drive from heavy oil reservoirs is due to low gas mobility. Chapter III presents the concept of the alteration of porous media wettability from liquid-wetting to intermediate gas-wetting. The idea is novel and has not been introduced in the petroleum literature before. There are significant implications from such as proposal. The most direct application of intermediate gas wetting is wettability alteration around the wellbore. Such an alteration can significantly improve well deliverability in gas condensate reservoirs where gas well deliverability decreases below dewpoint pressure. Part I of Chapter III studies the effect of gravity, viscous forces, interfacial tension, and wettability on the critical condensate saturation and relative permeability of gas condensate systems. A simple phenomenological network model is used for this study, The theoretical results reveal that wettability significantly affects both the critical gas saturation and gas relative permeability. Gas relative permeability may increase ten times as contact angle is altered from 0{sup o} (strongly liquid wet) to 85{sup o} (intermediate gas-wetting). The results from the theoretical study motivated the experimental investigation described in Part II. In Part II we demonstrate that the wettability of porous media can be altered from liquid-wetting to gas-wetting. This part describes our attempt to find appropriate chemicals for wettability alteration of various substrates including rock matrix. Chapter IV provides a comprehensive treatment of molecular, pressure, and thermal diffusion and convection in porous media Basic theoretical analysis is presented using irreversible thermodynamics.

  13. Petroleum mineral oil refining and evaluation of cancer hazard.

    PubMed

    Mackerer, Carl R; Griffis, Larry C; Grabowski Jr, John S; Reitman, Fred A

    2003-11-01

    Petroleum base oils (petroleum mineral oils) are manufactured from crude oils by vacuum distillation to produce several distillates and a residual oil that are then further refined. Aromatics including alkylated polycyclic aromatic compounds (PAC) are undesirable constituents of base oils because they are deleterious to product performance and are potentially carcinogenic. In modern base oil refining, aromatics are reduced by solvent extraction, catalytic hydrotreating, or hydrocracking. Chronic exposure to poorly refined base oils has the potential to cause skin cancer. A chronic mouse dermal bioassay has been the standard test for estimating carcinogenic potential of mineral oils. The level of alkylated 3-7-ring PAC in raw streams from the vacuum tower must be greatly reduced to render the base oil noncarcinogenic. The processes that can reduce PAC levels are known, but the operating conditions for the processing units (e.g., temperature, pressure, catalyst type, residence time in the unit, unit engineering design, etc.) needed to achieve adequate PAC reduction are refinery specific. Chronic dermal bioassays provide information about whether conditions applied can make a noncarcinogenic oil, but cannot be used to monitor current production for quality control or for conducting research or developing new processes since this test takes at least 78 weeks to conduct. Three short-term, non-animal assays all involving extraction of oil with dimethylsulfoxide (DMSO) have been validated for predicting potential carcinogenic activity of petroleum base oils: a modified Ames assay of a DMSO extract, a gravimetric assay (IP 346) for wt. percent of oil extracted into DMSO, and a GC-FID assay measuring 3-7-ring PAC content in a DMSO extract of oil, expressed as percent of the oil. Extraction with DMSO concentrates PAC in a manner that mimics the extraction method used in the solvent refining of noncarcinogenic oils. The three assays are described, data demonstrating the

  14. Crude oil steam distillation in steam flooding. Final report

    SciTech Connect

    Wu, C.H.; Elder, R.B.

    1980-08-01

    Steam distillation yields of sixteen crude oils from various parts of the United States have been determined at a saturated steam pressure of 200 psig. Study made to investigate the effect of steam pressure (200 to 500 psig) on steam distillation yields indicates that the maximum yields of a crude oil may be obtained at 200 psig. At a steam distillation correlation factor (V/sub w//V/sub oi/) of 15, the determined steam distillation yields range from 12 to 56% of initial oil volume for the sixteen crude oils with gravity ranging from 12 to 40/sup 0/API. Regression analysis of experimental steam distillation yields shows that the boiling temperature (simulated distillation temperature) at 20% simulated distillation yield can predict the steam distillation yields reasonably well: the standard error ranges from 2.8 to 3.5% (in yield) for V/sub w//V/sub oi/ < 5 and from 3.5 to 4.5% for V/sub w//V/sub oi/ > 5. The oil viscosity (cs) at 100/sup 0/F can predict the steam distillation yields with standard error from 3.1 to 4.3%. The API gravity can predict the steam distillation yields with standard error from 4.4 to 5.7%. Characterization factor is an unsatisfactory correlation independent variable for correlation purpose.

  15. 31 CFR 561.318 - Petroleum.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Petroleum. 561.318 Section 561.318 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... § 561.318 Petroleum. The term petroleum (also known as crude oil) means a mixture of hydrocarbons...

  16. 78 FR 40131 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-03

    ... National Petroleum Council AGENCY: Office of Fossil Energy, Department of Energy. ACTION: Notice of Open Meeting. SUMMARY: This notice announces a meeting of the National Petroleum Council. The Federal Advisory... Business Properly Brought Before the National Petroleum Council Adjournment Public Participation:...

  17. 77 FR 42297 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-18

    ... National Petroleum Council AGENCY: Department of Energy, Office of Fossil Energy. ACTION: Notice of open meeting. ] SUMMARY: This notice announces a meeting of the National Petroleum Council. The Federal... Brought Before the National Petroleum Council Adjournment Public Participation: The meeting is open to...

  18. 31 CFR 561.318 - Petroleum.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Petroleum. 561.318 Section 561.318 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... § 561.318 Petroleum. The term petroleum (also known as crude oil) means a mixture of hydrocarbons...

  19. 76 FR 53889 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-30

    ... National Petroleum Council AGENCY: Department of Energy, Office of Fossil Energy. ACTION: Notice of Open Meeting. SUMMARY: This notice announces a meeting of the National Petroleum Council. The Federal Advisory... National, Petroleum Council, Adjournment. Public Participation: The meeting is open to the public....

  20. Unit: Petroleum, Inspection Pack, National Trial Print.

    ERIC Educational Resources Information Center

    Australian Science Education Project, Toorak, Victoria.

    This is a National Trial Print of a unit on petroleum developed for the Australian Science Education Project. The package contains the teacher's edition of the written material and a script for a film entitled "The Extraordinary Experience of Nicholas Nodwell" emphasizing the uses of petroleum and petroleum products in daily life and…

  1. 21 CFR 172.886 - Petroleum wax.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Petroleum wax. 172.886 Section 172.886 Food and... PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Multipurpose Additives § 172.886 Petroleum wax. Petroleum wax may be safely used in or on food, in accordance with the following conditions: (a)...

  2. Vegetable oils as a petroleum replacement

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The current dependence of the world economy on petroleum cannot be sustained in the long run. Petroleum is expected to be depleted in the foreseeable future. In addition, the use of petroleum causes carbon dioxide emissions leading to global warming. Renewable sources need to be explored. One of the...

  3. Strategic petroleum reserve annual report

    SciTech Connect

    1996-02-15

    Section 165 of the Energy Policy and Conservation Act (Public Law 94- 163), as amended, requires the Secretary of Energy to submit annual reports to the President and the Congress on activities of the Strategic Petroleum Reserve (SPR). This report describes activities for the year ending December 31, 1995.

  4. PETROLEUM BIOREFINING FOR POLLUTION PREVENTION

    SciTech Connect

    John J. Kilbane II

    2002-03-01

    The objective of this project was to isolate and characterize thermophilic bacterial cultures that can be used for the selective removal of nitrogen, sulfur, and/or metals in the biorefining of petroleum. The project was completed on schedule and no major difficulties were encountered. Significant progress was made on multiple topics relevant to the development of a petroleum biorefining process capable of operating at thermophilic temperatures. New cultures capable of selectively cleaving C-N or C-S bonds in molecules relevant to petroleum were obtained, and the genes encoding the enzymes for these unique biochemical reactions were cloned and sequenced. Genetic tools were developed that enable the use of Thermus thermophilus as a host to express any gene of interest, and information was obtained regarding the optimum conditions for the growth of T. thermophilus. The development of a practical biorefining process still requires further research and the future research needs identified in this project include the development of new enzymes and pathways for the selective cleavage of C-N or C-S bonds that have higher specific activities, increased substrate range, and are capable of functioning at thermophilic temperatures. Additionally, there is a need for process engineering research to determine the maximum yield of biomass and cloned gene products that can be obtained in fed-batch cultures using T. thermophilus, and to determine the best configuration for a process employing biocatalysts to treat petroleum.

  5. Petroleum geology of marine evaporites

    SciTech Connect

    Billo, S.M. )

    1994-08-01

    The conditions necessary for evaporite deposition are also important with respect to genesis of source beds for petroleum. In a restricted basin marked by large-scale salt successions, it is presumed that the basin proper is separated from the open sea either by structural or physiographic barriers. These barriers may elevate the effective wave base so that much of the basin is in the stagnant zone or in reducing environment, where sediments rich in organic matter may be deposited. Such shallow barriers increase the conditions favorable for the generation of petroleum. Since marine evaporitic basins are not ideally closed systems, but are subject to influxes and perhaps refluxes of sea water or brine, much petroleum associated with evaporites is generated from dissolved and particulate organic matter swept from the normal marine into the evaporitic environments. Only carbonates precipitate in the mesosaline part (4-12% salinity) of such evaporitic environments. They are of great significance in source rock origin. The huge reserves of petroleum in the Mesozoic of the Middle East, and many other areas including the Michigan, Paradox, and Delaware basins, owe their origin to the thick sequences of carbonates and evaporites of the mesosaline environments. Repeated cycles of oil and gas formation in the stratigraphic record are related to tectonic, climatic, or eustatic events or both, and to increasing sedimentary overburden.

  6. Coke from coal and petroleum

    DOEpatents

    Wynne, Jr., Francis E.; Lopez, Jaime; Zaborowsky, Edward J.

    1981-01-01

    A carbonaceous coke is manufactured by the delayed coking of a slurry mixture of from about 10 to about 30 weight percent of caking or non-caking coal and the remainder a petroleum resid blended at below 50.degree. C.

  7. Recent Advances in Petroleum Microbiology

    PubMed Central

    Van Hamme, Jonathan D.; Singh, Ajay; Ward, Owen P.

    2003-01-01

    Recent advances in molecular biology have extended our understanding of the metabolic processes related to microbial transformation of petroleum hydrocarbons. The physiological responses of microorganisms to the presence of hydrocarbons, including cell surface alterations and adaptive mechanisms for uptake and efflux of these substrates, have been characterized. New molecular techniques have enhanced our ability to investigate the dynamics of microbial communities in petroleum-impacted ecosystems. By establishing conditions which maximize rates and extents of microbial growth, hydrocarbon access, and transformation, highly accelerated and bioreactor-based petroleum waste degradation processes have been implemented. Biofilters capable of removing and biodegrading volatile petroleum contaminants in air streams with short substrate-microbe contact times (<60 s) are being used effectively. Microbes are being injected into partially spent petroleum reservoirs to enhance oil recovery. However, these microbial processes have not exhibited consistent and effective performance, primarily because of our inability to control conditions in the subsurface environment. Microbes may be exploited to break stable oilfield emulsions to produce pipeline quality oil. There is interest in replacing physical oil desulfurization processes with biodesulfurization methods through promotion of selective sulfur removal without degradation of associated carbon moieties. However, since microbes require an environment containing some water, a two-phase oil-water system must be established to optimize contact between the microbes and the hydrocarbon, and such an emulsion is not easily created with viscous crude oil. This challenge may be circumvented by application of the technology to more refined gasoline and diesel substrates, where aqueous-hydrocarbon emulsions are more easily generated. Molecular approaches are being used to broaden the substrate specificity and increase the rates and

  8. Comparison of the properties of some synthetic crudes with petroleum crudes

    NASA Technical Reports Server (NTRS)

    Antoine, A. C.

    1979-01-01

    Physical properties and chemical compositions of six synthetic crudes were determined. The results were compared to those of typical petroleum crudes, with the interest being the feasibility of making jet fuels from oil shale and coal syncrudes. The specific gravity, viscosity, and pour point were measured, showing that these crudes would be described as heavier rather than lighter crudes. The boiling range distribution of the crudes was determined by distillation and by gas chromatography. In addition, gel permeation chromatograms were obtained, giving a unique molecular weight distribution profile for each crude. Analyses for carbon, hydrogen, nitrogen and sulfur concentrations were performed, as well as for hydrocarbon group type and trace element concentrations. It was found that the range in concentration of vanadium, an element whose presence in turbine fuels is of major concern, was lower than that of petroleum crudes. Sodium and potassium, other elements of concern, were present in comparatively high concentrations.

  9. Final Report, Distillation Column Flooding Predictor

    SciTech Connect

    George E. Dzyacky

    2003-05-31

    The Flooding Predictor is an advanced process control strategy comprising a patented pattern-recognition methodology that identifies pre-flood patterns discovered to precede flooding events in distillation columns. The grantee holds a U.S. patent on the modeling system. The technology was validated at the Separations Research Program, The University of Texas at Austin under a grant from the U. S. Department of Energy, Inventions & Innovation Program. Distillation tower flooding occurs at abnormally high vapor and/or liquid rates. The loss in tray efficiencies is attributed to unusual behavior of liquid inventories inside the column leading to conditions of flooding of the space in between trays with liquid. Depending on the severity of the flood condition, consequences range from off spec products to equipment damage and tower shutdown. This non-intrusive pattern recognition methodology, processes signal data obtained from existing column instrumentation. Once the pattern is identified empirically, it is modeled and coded into the plant's distributed control system. The control system is programmed to briefly "unload" the tower each time the pattern appears. The unloading takes the form of a momentary reduction in column severity, e.g., decrease bottom temperature, reflux or tower throughput. Unloading the tower briefly at the pre-flood state causes long-term column operation to become significantly more stable - allowing an increase in throughput and/or product purity. The technology provides a wide range of value between optimization and flooding. When a distillation column is not running at capacity, it should be run in such a way ("pushed") that optimal product purity is achieved. Additional benefits include low implementation and maintenance costs, and a high level of console operator acceptance. The previous commercial applications experienced 98% uptime over a four-year period. Further, the technology is unique in its ability to distinguish between different

  10. Chemical composition of distillers grains, a review.

    PubMed

    Liu, KeShun

    2011-03-09

    In recent years, increasing demand for ethanol as a fuel additive and decreasing dependency on fossil fuels have resulted in a dramatic increase in the amount of grains used for ethanol production. Dry-grind is the major process, resulting in distillers dried grains with solubles (DDGS) as a major coproduct. Like fuel ethanol, DDGS has quickly become a global commodity. However, high compositional variation has been the main problem hindering its use as a feed ingredient. This review provides updated information on the chemical composition of distillers grains in terms of nutrient levels, changes during dry-grind processing, and causes for large variation. The occurrence in grain feedstock and the fate of mycotoxins during processing are also covered. During processing, starch is converted to glucose and then to ethanol and carbon dioxide. Most other components are relatively unchanged but concentrated in DDGS about 3-fold over the original feedstock. Mycotoxins, if present in the original feedstock, are also concentrated. Higher fold of increases in S, Na, and Ca are mostly due to exogenous addition during processing, whereas unusual changes in inorganic phosphorus (P) and phytate P indicate phytate hydrolysis by yeast phytase. Fermentation causes major changes, but other processing steps are also responsible. The causes for varying DDGS composition are multiple, including differences in feedstock species and composition, process methods and parameters, the amount of condensed solubles added to distiller wet grains, the effect of fermentation yeast, and analytical methodology. Most of them can be attributed to the complexity of the dry-grind process itself. It is hoped that information provided in this review will improve the understanding of the dry-grind process and aid in the development of strategies to control the compositional variation in DDGS.

  11. 31 CFR 576.206 - Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum Products, and...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Fund for Iraq, Iraqi Petroleum and Petroleum Products, and the Central Bank of Iraq. 576.206 Section... Prohibitions § 576.206 Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum... petroleum and petroleum products, and interests therein, but only until title passes to the...

  12. 31 CFR 542.209 - Prohibited transactions or dealings in or related to petroleum or petroleum products of Syrian...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... or related to petroleum or petroleum products of Syrian origin. 542.209 Section 542.209 Money and... dealings in or related to petroleum or petroleum products of Syrian origin. Except as otherwise authorized... petroleum or petroleum products of Syrian origin is prohibited....

  13. 31 CFR 542.529 - Policy on activities related to petroleum and petroleum products of Syrian origin for the benefit...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... petroleum and petroleum products of Syrian origin for the benefit of the National Coalition of Syrian... activities related to petroleum and petroleum products of Syrian origin for the benefit of the National... the purchase, trade, export, import, or production of petroleum or petroleum products of Syrian...

  14. 31 CFR 576.206 - Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum Products, and...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Fund for Iraq, Iraqi Petroleum and Petroleum Products, and the Central Bank of Iraq. 576.206 Section... Prohibitions § 576.206 Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum... petroleum and petroleum products, and interests therein, but only until title passes to the...

  15. 31 CFR 576.206 - Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum Products, and...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Fund for Iraq, Iraqi Petroleum and Petroleum Products, and the Central Bank of Iraq. 576.206 Section... Prohibitions § 576.206 Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum... petroleum and petroleum products, and interests therein, but only until title passes to the...

  16. 31 CFR 576.206 - Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum Products, and...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Fund for Iraq, Iraqi Petroleum and Petroleum Products, and the Central Bank of Iraq. 576.206 Section... Prohibitions § 576.206 Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum... petroleum and petroleum products, and interests therein, but only until title passes to the...

  17. Distillation by repeated measurements: Continuous spectrum case

    SciTech Connect

    Bellomo, Bruno; Compagno, Giuseppe; Nakazato, Hiromichi; Yuasa, Kazuya

    2010-12-15

    Repeated measurements on one part of a bipartite system strongly affect the other part that is not measured, the dynamics of which is regulated by an effective contracted evolution operator. When the spectrum of this operator is discrete, the nonmeasured system is driven into a pure state, irrespective of the initial state, provided that the spectrum satisfies certain conditions. We show here that, even in the case of continuous spectrum, an effective distillation can occur under rather general conditions. We confirm it by applying our formalism to a simple model.

  18. Tritium Isotope Separation Using Adsorption-Distillation Column

    SciTech Connect

    Fukada, Satoshi

    2005-07-15

    In order to miniaturize the height of a distillation tower for the detritiation of waste water from fusion reactors, two experiments were conducted: (1) liquid frontal chromatography of tritium water eluting through an adsorption column and (2) water distillation using a column packed with adsorbent particles. The height of the distillation tower depends on the height equivalent to a theoretical plate, HETP, and the equilibrium isotope separation factor, {alpha}{sub H-T}{sup equi}. The adsorption action improved not only HETP but also {alpha}{sub H-T}{sup equi}. Since the adsorption-distillation method proposed here can shorten the tower height with keeping advantages of the distillation, it may bring an excellent way for miniaturizing the distillation tower to detritiate a large amount of waste water from fusion reactors.

  19. Energy conservation in distillation: a technology applications manual

    SciTech Connect

    Not Available

    1980-05-01

    Distillation is the most widely practiced technique for separating mixtures of chemical species, but it is an energy intensive process. A 10% reduction in distillation energy consumption would effect a significant savings. On a national basis this would be an annual savings of 200 trillion Btu, or the equivalent of 36.5 million barrels of oil per year. Technology to achieve these savings in distillation energy is available and measures are presented to assist process engineers in technical and economic analysis of the energy conservation measures most suitable for particular distillation applications. The manual catalogs all of the energy conservation options applicable to distillation and the options by the investment required; describes in detail the options having a significant potential to reduce distillation energy requirements economically; provides guidelines that will allow the plant engineer to quickly screen each option for his application; and provides short-cut calculation procedures for use in a preliminary economic analysis of promising options.

  20. Basic petroleum geology, 2nd ed. , revised

    SciTech Connect

    Link.

    1990-01-01

    This book contains revised and updated material, including approximately 200 additional illustrations and an extensive glossary of terms. A valuable reference for geology students and petroleum professionals, the text presents fundamental concepts of geology in terms of sedimentary deposition, petroleum occurrence, exploration, and recovery. This book contains information on geologic time, historical geology and stratigraphy; Minerals and rocks; Weathering erosion, and deposition; Marine erosion and deposition; Depositional basins; Lacustrine, desert and glacial environments; Subsurface water and diagenesis; Structural geology; petroleum traps; Petroleum and reservoirs; Geological considerations and engineering practices; Rocks, reservoirs, and recovery techniques; Exploration techniques for petroleum; Bibliography Glossary; Index.

  1. Cascade Distillation Subsystem Development: Early Results From the Exploration Life Support Distillation Technology Comparison Test

    NASA Technical Reports Server (NTRS)

    Callahan, Michael R.; Patel, Vipul; Pickering, Karen D.

    2009-01-01

    In 2009, the Cascade Distillation Subsystem (CDS) wastewater processor (Honeywell International, Torrance, CA) was assessed in the National Aeronautics and Space Administration (NASA) Exploration Life Support (ELS) distillation comparison test. The purpose of the test was to collect data to support down-selection and development of a primary distillation technology for application in a lunar outpost water recovery system. The CDS portion of the comparison test was conducted between May 6 and August 19, 2009. The system was challenged with two pretreated test solutions, each intended to represent a feasible wastewater generated in a surface habitat. The 30-day equivalent wastewater loading volume for a crew of four was processed for each wastewater solution. Test Solution 1 consisted of a mixed stream containing human-generated urine and humidity condensate. Test Solution 2 contained the addition of human-generated hygiene wastewater to the solution 1 waste stream components. Approximately 1500 kg of total wastewater was processed through the CDS during testing. Respective recoveries per solution were 93.4 +/- 0.7 and 90.3 +/- 0.5%. The average specific energy of the system was calculated to be less than 130 W-hr/kg. The following paper provides detailed information and data on the performance of the CDS as challenged per the ELS distillation comparison test.

  2. Cascade Distillation Subsystem Development: Early Results from the Exploration Life Support Distillation Technology Comparison Test

    NASA Technical Reports Server (NTRS)

    Callahan, Michael R.; Patel, Vipul; Pickering, Karen D.

    2010-01-01

    In 2009, the Cascade Distillation Subsystem (CDS) wastewater processor (Honeywell International, Torrance, California) was assessed in the National Aeronautics and Space Administration (NASA) Exploration Life Support (ELS) distillation comparison test. The purpose of the test was to collect data to support down-selection and development of a primary distillation technology for application in a lunar outpost water recovery system. The CDS portion of the comparison test was conducted between May 6 and August 19, 2009. The system was challenged with two pretreated test solutions, each intended to represent a feasible wastewater generated in a surface habitat. The 30-day equivalent wastewater loading volume for a crew of four was intended to be processed for each wastewater solution. Test Solution 1 consisted of a mixed stream containing human-generated urine and humidity condensate. Test Solution 2 contained the addition of human-generated hygiene wastewater to the solution 1 waste stream components. Approximately 1500 kg of total wastewater was processed through the CDS during testing. Respective recoveries per solution were 93.4 +/- 0.7 and 90.3 +/- 0.5 percent. The average specific energy of the system during testing was calculated to be less than 120 W-hr/kg. The following paper provides detailed information and data on the performance of the CDS as challenged per the ELS distillation comparison test.

  3. Continuous-variable entanglement distillation with noiseless linear amplification

    NASA Astrophysics Data System (ADS)

    Yang, Song; Zhang, ShengLi; Zou, XuBo; Bi, SiWen; Lin, XuLing

    2012-12-01

    Quantum entanglement distillation is a probabilistic process which protects entanglement from environment-induced decoherence. In this paper, we investigate the distillation of a continuousvariable optic entangled state with noiseless linear amplification (NLA). NLA schemes perform better than the conventional photon-subtraction-based distillation scheme, particularly in distributing entanglement over extremely low efficiency quantum channels. Finally, a comparison between the NLA-based scheme and the local squeezing-enhanced photon subtraction scheme is also investigated.

  4. Risk-Based Evaluation of Total Petroleum Hydrocarbons in Vapor Intrusion Studies

    PubMed Central

    Brewer, Roger; Nagashima, Josh; Kelley, Michael; Heskett, Marvin; Rigby, Mark

    2013-01-01

    This paper presents a quantitative method for the risk-based evaluation of Total Petroleum Hydrocarbons (TPH) in vapor intrusion investigations. Vapors from petroleum fuels are characterized by a complex mixture of aliphatic and, to a lesser extent, aromatic compounds. These compounds can be measured and described in terms of TPH carbon ranges. Toxicity factors published by USEPA and other parties allow development of risk-based, air and soil vapor screening levels for each carbon range in the same manner as done for individual compounds such as benzene. The relative, carbon range makeup of petroleum vapors can be used to develop weighted, site-specific or generic screening levels for TPH. At some critical ratio of TPH to a targeted, individual compound, the overwhelming proportion of TPH will drive vapor intrusion risk over the individual compound. This is particularly true for vapors associated with diesel and other middle distillate fuels, but can also be the case for low-benzene gasolines or even for high-benzene gasolines if an adequately conservative, target risk is not applied to individually targeted chemicals. This necessitates a re-evaluation of the reliance on benzene and other individual compounds as a stand-alone tool to evaluate vapor intrusion risk associated with petroleum. PMID:23765191

  5. Risk-based evaluation of total petroleum hydrocarbons in vapor intrusion studies.

    PubMed

    Brewer, Roger; Nagashima, Josh; Kelley, Michael; Heskett, Marvin; Rigby, Mark

    2013-06-13

    This paper presents a quantitative method for the risk-based evaluation of Total Petroleum Hydrocarbons (TPH) in vapor intrusion investigations. Vapors from petroleum fuels are characterized by a complex mixture of aliphatic and, to a lesser extent, aromatic compounds. These compounds can be measured and described in terms of TPH carbon ranges. Toxicity factors published by USEPA and other parties allow development of risk-based, air and soil vapor screening levels for each carbon range in the same manner as done for individual compounds such as benzene. The relative, carbon range makeup of petroleum vapors can be used to develop weighted, site-specific or generic screening levels for TPH. At some critical ratio of TPH to a targeted, individual compound, the overwhelming proportion of TPH will drive vapor intrusion risk over the individual compound. This is particularly true for vapors associated with diesel and other middle distillate fuels, but can also be the case for low-benzene gasolines or even for high-benzene gasolines if an adequately conservative, target risk is not applied to individually targeted chemicals. This necessitates a re-evaluation of the reliance on benzene and other individual compounds as a stand-alone tool to evaluate vapor intrusion risk associated with petroleum.

  6. Observation of vanadyl porphyrins and sulfur-containing vanadyl porphyrins in a petroleum asphaltene by atmospheric pressure photonionization Fourier transform ion cyclotron resonance mass spectrometry.

    PubMed

    Qian, Kuangnan; Mennito, Anthony S; Edwards, Kathleen E; Ferrughelli, Dave T

    2008-07-01

    Vanadyl (VO) porphyrins and sulfur-containing vanadyl (VOS) porphyrins of a wide carbon number range (C(26) to C(52)) and Z-number range (-28 to -54) were detected and identified in a petroleum asphaltene by atmospheric pressure photonionization (APPI) and Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). APPI provides soft ionization of asphaltene molecules (including VO and VOS porphyrins), generating primarily molecular ions (M(+.)). The ultra-high mass resolving power (m/Delta m(FWHM) approximately 500 K) of FTICR-MS enabled resolution and positive identification of elemental formulae for the entire family of VO and VOS porphyrins in a complicated asphaltene matrix. Deocophylerythro-etioporphyrin (DPEP) is found to be the most prevalent structure, followed by etioporphyrins (etio)- and rhodo (benzo)-DPEP. The characteristic Z-distribution of VO porphyrins suggests benzene and naphthene increment in the growth of porphyrin ring structures. Bimodal carbon number distributions of VO porphyrins suggest possible different origins of low and high molecular weight species. To our knowledge, the observation of VOS porphyrins in a petroleum product has not previously been reported. The work is also the first direct identification of the entire vanadyl porphyrin family by ultra-high resolution mass spectrometry without chromatographic separation or demetallation.

  7. Petroleum Supply Monthly, September 1990. [Contains glossary

    SciTech Connect

    Whited, D.; Jacobus, P.

    1990-11-28

    Data presented in this PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 46 tabs.

  8. Petroleum supply monthly, October 1990. [Contains Glossary

    SciTech Connect

    Not Available

    1990-12-27

    Data presented in this report describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 54 tabs.

  9. Petroleum supply monthly, October 1991. [Contains glossary

    SciTech Connect

    Not Available

    1991-10-30

    Data presented in this report describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importer, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics 14 figs., 56 tabs.

  10. Local Gaussian operations can enhance continuous-variable entanglement distillation

    SciTech Connect

    Zhang Shengli; Loock, Peter van

    2011-12-15

    Entanglement distillation is a fundamental building block in long-distance quantum communication. Though known to be useless on their own for distilling Gaussian entangled states, local Gaussian operations may still help to improve non-Gaussian entanglement distillation schemes. Here we show that by applying local squeezing operations both the performance and the efficiency of existing distillation protocols can be enhanced. We find that such an enhancement through local Gaussian unitaries can be obtained even when the initially shared Gaussian entangled states are mixed, as, for instance, after their distribution through a lossy-fiber communication channel.

  11. Engineering-Scale Distillation of Cadmium for Actinide Recovery

    SciTech Connect

    J.C. Price; D. Vaden; R.W. Benedict

    2007-10-01

    During the recovery of actinide products from spent nuclear fuel, cadmium is separated from the actinide products by a distillation process. Distillation occurs in an induction-heated furnace called a cathode processor capable of processing kilogram quantities of cadmium. Operating parameters have been established for sufficient recovery of the cadmium based on mass balance and product purity. A cadmium distillation rate similar to previous investigators has also been determined. The development of cadmium distillation for spent fuel treatment enhances the capabilities for actinide recovery processes.

  12. Vapor compression distiller and membrane technology for water revitalization

    NASA Technical Reports Server (NTRS)

    Ashida, A.; Mitani, K.; Ebara, K.; Kurokawa, H.; Sawada, I.; Kashiwagi, H.; Tsuji, T.; Hayashi, S.; Otsubo, K.; Nitta, K.

    1987-01-01

    Water revitalization for a space station can consist of membrane filtration processes and a distillation process. Water recycling equipment using membrane filtration processes was manufactured for ground testing. It was assembled using commercially available components. Two systems for the distillation are studied: one is absorption type thermopervaporation cell and the other is a vapor compression distiller. Absorption type thermopervaporation, able to easily produce condensed water under zero gravity, was investigated experimentally and through simulated calculation. The vapor compression distiller was studied experimentally and it offers significant energy savings for evaporation of water.

  13. Ethanol production by vapor compression distillation

    SciTech Connect

    Ellis, G.S.

    1981-01-01

    The goal of this project is to develop and demonstrate a one gallon per hour vapor compression distillation unit for fuel ethanol production that can be profitably manufactured and economically operated by individual family units. Vapor compression distillation is already an industrially accepted process and this project's goal is to demonstrate that it can be done economically on a small scale. Theoretically, the process is independent of absolute pressure. It is only necessary that the condenser be at higher pressure than the evaporator. By reducing the entire process to a pressure of approximately 0.1 atmosphere, the evaporation and condensation can occur at near ambient temperature. Even though this approach requires a vacuum pump, and thus will not represent the final cost effective design, it does not require preheaters, high temperature materials, or as much insulation as if it were to operate a near ambient pressure. Therefore, the operation of the ambient temperature unit constitutes the first phase of this project. Presently, the ambient temperature unit is fully assembled and has begun testing. So far it has successfully separated ethanol from a nine to one diluted input solution. However the production rate has been very low.

  14. Alaskan North Slope petroleum systems

    USGS Publications Warehouse

    Magoon, L.B.; Lillis, P.G.; Bird, K.J.; Lampe, C.; Peters, K.E.

    2003-01-01

    Six North Slope petroleum systems are identified, described, and mapped using oil-to-oil and oil-to-source rock correlations, pods of active source rock, and overburden rock packages. To map these systems, we assumed that: a) petroleum source rocks contain 3.2 wt. % organic carbon (TOC); b) immature oil-prone source rocks have hydrogen indices (HI) >300 (mg HC/gm TOC); c) the top and bottom of the petroleum (oil plus gas) window occur at vitrinite reflectance values of 0.6 and 1.0% Ro, respectively; and d) most hydrocarbons are expelled within the petroleum window. The six petroleum systems we have identified and mapped are: a) a southern system involving the Kuna-Lisburne source rock unit that was active during the Late Jurassic and Early Cretaceous; b) two western systems involving source rock in the Kingak-Blankenship, and GRZ-lower Torok source rock units that were active during the Albian; and c) three eastern systems involving the Shublik-Otuk, Hue Shale and Canning source rock units that were active during the Cenozoic. The GRZ-lower Torok in the west is correlative with the Hue Shale to the east. Four overburden rock packages controlled the time of expulsion and gross geometry of migration paths: a) a southern package of Early Cretaceous and older rocks structurally-thickened by early Brooks Range thrusting; b) a western package of Early Cretaceous rocks that filled the western part of the foreland basin; c) an eastern package of Late Cretaceous and Paleogene rocks that filled the eastern part of the foreland basin; and d) an offshore deltaic package of Neogene rocks deposited by the Colville, Canning, and Mackenzie rivers. This petroleum system poster is part of a series of Northern Alaska posters on modeling. The poster in this session by Saltus and Bird present gridded maps for the greater Northern Alaskan onshore and offshore that are used in the 3D modeling poster by Lampe and others. Posters on source rock units are by Keller and Bird as well as

  15. Petroleum geology of Arabian Peninsula

    SciTech Connect

    Billo, S.M.

    1982-05-01

    Petroleum activities in the Arabian Peninsula show new trends in the 1980s. Petroleum exploration is intensified and huge discoveries are anticipated. A giant Jurassic gas field along the coast of the Arabian Gulf discovered recently tops 150 tcf, the largest single reserve ever. Other giant oil fields in the area are undergoing expansion in development and productivity. Today, the Peninsula, with a total area that surpasses one million square miles, produces and exports more oil and gas and has greater reserves than any other area in the world. The excellent reservoir rocks are located in the Jurassic and Cretaceous formations between the Arabian Shield and the Tethyan Seaway. They represent porous and permeable marine cyclical beds sealed by impervious shales and anhydrites. Reservoir sedimentology was affected by 2 orogenies during late Cretaceous and Pliocene time portrayed by the Cratonic area to the southwest and the orthogeosynclinal area to the northeast. The eastern part was little deformed by these movements.

  16. On the nature and origin of acidic species in petroleum. 1. Detailed acid type distribution in a California crude oil.

    SciTech Connect

    Tomczyk, N. A.; Winans, R. E.; Shinn, J. H.; Robinson, R. C.; Chemistry; Chevron Research and Technology Co.

    2001-11-21

    Acidity in crude oils has long been a problem for refining. Knowledge of the detailed chemical composition of the acids responsible for corrosion can facilitate identification of problem crude oils and potentially lead to improved processing options for corrosive oils. A highly aerobically biodegraded crude from the San Joaquin Valley, which has a long history of causing corrosion problems during refining, was the subject of this study. The oil was first extracted with base, then acidified and extracted with petroleum ether. A portion of the resulting acid fraction was methylated. The unmethylated extract was analyzed by FTIR, NMR, and the methylated sample was analyzed by high-resolution mass spectrometry (HRMS). Over 96% of the ions observed in HRMS have been assigned reliable formulas. Considerably greater functionality is seen in this sample than would be presumed from the 'naphthenic acid' title typically assigned to these species. Although over 60% of the compounds contained two or more oxygens, compounds containing only oxygen heteroatoms accounted for less than 10% of the acidic compounds identified. Approximately one-half of the species contained nitrogen and about one-fourth contained sulfur. It is believed that microbial degradation is a major source of these acidic components. It was also observed that acid species with higher degrees of heteroatom substitution generally also had a higher degree of saturation than those species having less heteroatoms, possibly due to impeded migration of highly substituted, less-saturated species.

  17. Petroleum geology of western Antarctica

    SciTech Connect

    Kingston, J. )

    1990-05-01

    Antarctica's geology is mostly obscured by thick, moving ice that covers 95% of the land and continental shelf. Reconnaissance investigations of outcrops, shallow boreholes, and geophysical surveys are limited and peripheral owing to ice coverage. However, it is possible to outline substantial elements of the regional geology. Further insight is gained by comparison to analogous sedimentary provinces, especially provinces once adjoined within the framework of the Gondwana supercontinent until middle Cretaceous. The petroleum potential of Antarctica, as in the case of the other related high-standing Gondwana continental fragments, is in Early Cretaceous rifts associated with the Gondwana breakup and with the Pacific convergence in the west Antarctica back arc. The Pacific-facing western Antarctica includes two structural provinces: (1) the Cretaceous and younger interior rift system on the east side of the Weddell and Ross Sea embayment, which contain aulacogens that form the boundary with East Antarctica and (2) the back-arc and fore-arc basins adjoining the Antarctica Peninsula and extending into Marie Byrd Land and the Bellingshausen Sea which are associated with the eastward convergence of the Pacific plate. The petroleum potential of the rifts may be assessed by analogies with related rifts of Australia, India, and South Africa; assessment of the convergent basins of western Antarctica depends upon analogy with similar basins of South America, New Zealand, and Indonesia. An estimate of the petroleum potential of western Antarctica generally is comparable with oil and gas occurrences (both in overall quantity and in field sizes) in the other Gondwana continental fragments. However, in view of the thict moving ice cover, the remote locale, and severe climate, petroleum production is largely beyond technology at this time and probably is economically unfeasible.

  18. Conversion of heavy petroleum oils

    SciTech Connect

    Farcasiu, M.

    1982-03-02

    Heavy petroleum oils, such as vacuum resids, and heavy fractions of tar sands and shale oil, are partially converted to more volatile hydrocarbons by mixing with light aromatic hydrocarbons and treatment of the mixture with a friedel-crafts catalyst such as aluminum chloride. It is believed that the conversion found is essentially a transalkylation, I.E. The resid undergoes dealkylation with concurrent alkylation of the light aromatic hydrocarbon.

  19. Pennsylvania's contribution to petroleum geology

    SciTech Connect

    Dickey, P.A.

    1989-09-01

    John F. Carll of the Second Geological Survey of Pennsylvania laid the foundations of both petroleum geology and reservoir engineering. J. P. Lesley, director of the Second Survey, had introduced structure contours when he was working in the anthracite fields. He pointed out that the great oil fields of Pennsylvania were in the only part of the state where there were no anticlines. I. C. White, another geologist with the Second Survey, emphasized the anticlinal theory adopted as a method of prospecting until the discovery of the Cushing field in Oklahoma in 1912. George Ashley, state geologist of Pennsylvanian in the 1930s and 1940s, said that after the gas companies had drilled all the anticlines there would still be the synclines. David White in 1915 noticed the relation between the metamorphosis (rank) of coal and the occurrence of oil and gas. This method (vitrinite reflectance) is now widely applied in the evaluation of basins. In the late 1930s, the resurvey of the Pennsylvania oil regions showed that the reservoirs were shoreline sands, probably barrier islands. In the 1950s the AAPG recommended a study of the recent sediments of the Mississippi delta by Scripps Institute of Oceanography. The ability to recognize depositional environments has caused a revolution in petroleum geology, and recently has been recognized by petroleum engineers as the key to reservoir characterization.

  20. Overview of African petroleum systems

    SciTech Connect

    Perrodon, A. )

    1993-07-12

    Bordered by two large, still spreading oceans and subjected to tensional forces for more than 200 million years, continental Africa has now reached its largest surface expression ever. With a total sedimentary area of 15 million sq km distributed in about 80 basins, Africa possesses and produces circa 10% of the world's oil and 7% of the gas. More than 95% of these hydrocarbons are concentrated in seven petroleum provinces, ruled by three great petroleum systems that in turn are tightly controlled and determined by the geodynamic characteristics of the basins. From a stratigraphic standpoint, these three petroleum systems belong to three geological time periods: Silurian, Cretaceous, and Oligo-Miocene. Generally the Silurian system occurs in Saharan sag basins, the Cretaceous-Eocene systems in a continental rift complex of western and equatorial Africa, and the Cenozoic in two deltaic basins. The Upper Paleozoic and Jurassic, so rich in other continents, here play but a very minor part. The paper describes the Silurian system, the Cretaceous-Eocene system, and the Tertiary system.

  1. Dermal uptake of petroleum substances.

    PubMed

    Jakasa, Ivone; Kezic, Sanja; Boogaard, Peter J

    2015-06-01

    Petroleum products are complex substances comprising varying amounts of linear and branched alkanes, alkenes, cycloalkanes, and aromatics which may penetrate the skin at different rates. For proper interpretation of toxic hazard data, understanding their percutaneous absorption is of paramount importance. The extent and significance of dermal absorption of eight petroleum substances, representing different classes of hydrocarbons, was evaluated. Literature data on the steady-state flux and permeability coefficient of these substances were evaluated and compared to those predicted by mathematical models. Reported results spanned over 5-6 orders of magnitude and were largely dependent on experimental conditions in particular on the type of the vehicle used. In general, aromatic hydrocarbons showed higher dermal absorption than more lipophilic aliphatics with similar molecular weight. The results showed high variation and were largely influenced by experimental conditions emphasizing the need of performing the experiments under "in use" scenario. The predictive models overestimated experimental absorption. The overall conclusion is that, based on the observed percutaneous penetration data, dermal exposure to petroleum hydrocarbons, even of aromatics with highest dermal absorption is limited and highly unlikely to be associated with health risks under real use scenarios.

  2. 27 CFR 19.65 - Experimental distilled spirits plants.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... spirits plants. 19.65 Section 19.65 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Administrative and Miscellaneous Provisions Activities Not Subject to This Part § 19.65 Experimental distilled spirits plants....

  3. 76 FR 19908 - Revision of Distilled Spirits Plant Regulations; Corrections

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-11

    ... Spirits Plant Regulations; Corrections AGENCY: Alcohol and Tobacco Tax and Trade Bureau, Treasury. ACTION... published a final rule revising its distilled spirits plant regulations in the Federal Register of February... distilled spirits plant regulations as contained in 27 CFR part 19. TTB published this final rule as...

  4. 27 CFR 19.32 - Experimental distilled spirits plants.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... spirits plants. 19.32 Section 19.32 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Administrative and... distilled spirits plants. (a) General. The appropriate TTB officer may authorize the establishment...

  5. Potential Bleaching Techniques for use in Distillers Grains

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The ethanol industry is booming. And extensive research is currently being pursued to develop alternative uses for distillers dried grains (DDG) and distillers dried grains with solubles (DDGS), coproducts of the ethanol production process. Currently, DDG and DDGS are used exclusively as livestock f...

  6. Distillate Fuel Oil Assessment for Winter 1996-1997

    EIA Publications

    1997-01-01

    This article describes findings of an analysis of the current low level of distillate stocks which are available to help meet the demand for heating fuel this winter, and presents a summary of the Energy Information Administration's distillate fuel oil outlook for the current heating season under two weather scenarios.

  7. 27 CFR 26.211 - Warehouse receipts covering distilled spirits.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Warehouse receipts... and Recordkeeping § 26.211 Warehouse receipts covering distilled spirits. The sale of warehouse..., warehouse receipts for distilled spirits stored in warehouses, or elsewhere, must register and keep...

  8. 27 CFR 26.45 - Warehouse receipts covering distilled spirits.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Warehouse receipts... Recordkeeping § 26.45 Warehouse receipts covering distilled spirits. The sale of warehouse receipts for... distilled spirits into the United States from Puerto Rico who sells, or offers for sale, warehouse...

  9. Distillation time effect on lavender essential oil yield and composition

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Lavender (Lavandula angustifolia Mill.) is one of the most widely grown essential oil crops in the world. Commercial extraction of lavender oil is done using steam distillation. The objective of this study was to evaluate the effect of the length of the distillation time (DT) on lavender essential o...

  10. Teaching and Learning Distillation in Chemistry Laboratory Courses.

    ERIC Educational Resources Information Center

    van Keulen, Hanno; And Others

    Distillation in the chemistry laboratory is an essential part of a practicing chemists' and a chemistry educators' work. Nevertheless, regardless of the degree of importance in each of the aforementioned professions, few educational studies on teaching and learning distillation exist. In an effort to rectify this oversight, the Department of…

  11. Distillation with Vapour Compression. An Undergraduate Experimental Facility.

    ERIC Educational Resources Information Center

    Pritchard, Colin

    1986-01-01

    Discusses the need to design distillation columns that are more energy efficient. Describes a "design and build" project completed by two college students aimed at demonstrating the principles of vapour compression distillation in a more energy efficient way. General design specifications are given, along with suggestions for teaching…

  12. A Hydration of an Alkyne Illustrating Steam and Vacuum Distillation.

    ERIC Educational Resources Information Center

    Wasacz, J. P.; Badding, V. G.

    1982-01-01

    Reports on the conversion 2,5-dimethylhexyne-2,5-diol(I) to 2,2,5,5-tetramethyltetrahydrofuran-3-one(II) using aqueous mercuric sulfate without the use of acid. The experiment has been successfully performed in introductory organic chemistry laboratories demonstrating alkyne hydration, steam distillation, vacuum distillation, drying of organic…

  13. Teaching and Learning Distillation in Chemistry Laboratory Courses.

    ERIC Educational Resources Information Center

    Keulen, Hanno van; And Others

    1995-01-01

    Investigated the problems chemistry majors have with learning distillation concepts in traditional chemistry laboratory courses. Reports that students take the generalized concepts at face value, construct decontextualized concepts for distillation, and cannot interpret their observations or make reasoned decisions based on the theoretical…

  14. Distillation purification and radon assay of liquid xenon

    SciTech Connect

    Takeuchi, Yasuo

    2005-09-08

    We succeeded to reduce the Kr contamination in liquid xenon by a factor of 1/1000 with a distillation system in Kamioka mine. Then, the remaining radioactivities (Radon and Kr) in purified liquid xenon were measured with the XMASS prototype detector. In this talk, the distillation system and the remaining internal radioactivity levels are reported.

  15. An Automated Distillation Column for the Unit Operations Laboratory

    ERIC Educational Resources Information Center

    Perkins, Douglas M.; Bruce, David A.; Gooding, Charles H.; Butler, Justin T.

    2005-01-01

    A batch distillation apparatus has been designed and built for use in the undergraduate unit operations laboratory course. The column is fully automated and is accompanied by data acquisition and control software. A mixture of 1­-propanol and 2-­propanol is separated in the column, using either a constant distillate rate or constant composition…

  16. 27 CFR 29.53 - Identification of distilling apparatus.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... distilling apparatus. 29.53 Section 29.53 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Identification of distilling apparatus. (a) General. Each still or condenser manufactured will be identified by... serial number for the apparatus. (b) Marking requirements. The apparatus will be identified in a...

  17. 27 CFR 29.53 - Identification of distilling apparatus.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... distilling apparatus. 29.53 Section 29.53 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Identification of distilling apparatus. (a) General. Each still or condenser manufactured will be identified by... serial number for the apparatus. (b) Marking requirements. The apparatus will be identified in a...

  18. 76 FR 9079 - Revision of Distilled Spirits Plant Regulations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-16

    ...In this document, the Alcohol and Tobacco Tax and Trade Bureau adopts as a final rule, with some changes, a proposed revision of its distilled spirits plant regulations. The revision modernizes the requirements for operating distilled spirits plants and includes a number of organizational changes to improve the layout of the regulatory texts. These changes make the regulations easier to apply,......

  19. 27 CFR 28.280 - Distilled spirits and wines.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... wines. 28.280 Section 28.280 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... for Use on Aircraft § 28.280 Distilled spirits and wines. When an airline desires to withdraw distilled spirits or wines from its stock being held at the airport under customs custody, for use on...

  20. 27 CFR 28.280 - Distilled spirits and wines.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... wines. 28.280 Section 28.280 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... for Use on Aircraft § 28.280 Distilled spirits and wines. When an airline desires to withdraw distilled spirits or wines from its stock being held at the airport under customs custody, for use on...

  1. 27 CFR 28.280 - Distilled spirits and wines.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... wines. 28.280 Section 28.280 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... for Use on Aircraft § 28.280 Distilled spirits and wines. When an airline desires to withdraw distilled spirits or wines from its stock being held at the airport under customs custody, for use on...

  2. 27 CFR 28.280 - Distilled spirits and wines.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... wines. 28.280 Section 28.280 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... for Use on Aircraft § 28.280 Distilled spirits and wines. When an airline desires to withdraw distilled spirits or wines from its stock being held at the airport under customs custody, for use on...

  3. 27 CFR 28.280 - Distilled spirits and wines.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... wines. 28.280 Section 28.280 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... for Use on Aircraft § 28.280 Distilled spirits and wines. When an airline desires to withdraw distilled spirits or wines from its stock being held at the airport under customs custody, for use on...

  4. 27 CFR 19.32 - Experimental distilled spirits plants.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... spirits plants. 19.32 Section 19.32 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Administrative and... distilled spirits plants. (a) General. The appropriate TTB officer may authorize the establishment...

  5. Omniphobic Membrane for Robust Membrane Distillation

    SciTech Connect

    Lin, SH; Nejati, S; Boo, C; Hu, YX; Osuji, CO; Ehmelech, M

    2014-11-01

    In this work, we fabricate an omniphobic microporous membrane for membrane distillation (MD) by modifying a hydrophilic glass fiber membrane with silica nanoparticles followed by surface fluorination and polymer coating. The modified glass fiber membrane exhibits an anti-wetting property not only against water but also against low surface tension organic solvents that easily wet a hydrophobic polytetrafluoroethylene (PTFE) membrane that is commonly used in MD applications. By comparing the performance of the PTFE and omniphobic membranes in direct contact MD experiments in the presence of a surfactant (sodium dodecyl sulfate, SDS), we show that SDS wets the hydrophobic PTFE membrane but not the omniphobic membrane. Our results suggest that omniphobic membranes are critical for MD applications with feed waters containing surface active species, such as oil and gas produced water, to prevent membrane pore wetting.

  6. Determination of lithium in rocks by distillation

    USGS Publications Warehouse

    Fletcher, M.H.

    1949-01-01

    A method for the quantitative extraction and recovery of lithium from rocks is based on a high temperature volatilization procedure. The sample is sintered with a calcium carbonate-calcium chloride mixture at 1200?? C. for 30 minutes in a platinum ignition tube, and the volatilization product is collected in a plug of Pyrex glass wool in a connecting Pyrex tube. The distillate, which consists of the alkali chlorides with a maximum of 5 to 20 mg. of calcium oxide and traces of a few other elements, is removed from the apparatus by dissolving in dilute hydrochloric acid and subjected to standard analytiaal procedures. The sinter residues contained less than 0.0005% lithium oxide. Lithium oxide was recovered from synthetic samples with an average error of 1.1%.

  7. Improved semidefinite programming upper bound on distillable entanglement

    NASA Astrophysics Data System (ADS)

    Wang, Xin; Duan, Runyao

    2016-11-01

    An additive and semidefinite programming (SDP) computable entanglement measure is introduced to upper bound the amount of distillable entanglement in bipartite quantum states by operations completely preserving the positivity of partial transpose (PPT). This quantity is always smaller than or equal to the logarithmic negativity, the previously best known SDP bound on distillable entanglement, and the inequality is strict in general. Furthermore, a succinct SDP characterization of the one-copy PPT deterministic distillable entanglement for any given state is also obtained, which provides a simple but useful lower bound on the PPT distillable entanglement. Remarkably, there is a genuinely mixed state of which both bounds coincide with the distillable entanglement, while being strictly less than the logarithmic negativity.

  8. [National Institute for Petroleum and Energy Research] monthly progress report, August 1992

    SciTech Connect

    Not Available

    1992-10-01

    Geological and engineering data from Patrick Draw field and Almond outcrops have been electronically formatted for the initial data base on the Almond formation. In addition, a number of research areas are identified. An annotated bibliography of selected references on barrier islands, with emphasis on Patrick Draw field, Sweetwater County, WY, has been prepared. The bibliography contains more than 200 references on barrier island systems worldwide. The results of laboratory experiments indicate that surfactant-enhanced flooding has potential use for the recovery of oil from Naval Petroleum Reserve NPR No. 3 reservoirs. Because of the highly fractured nature of these reservoirs, chemical flooding is expected to be more efficient if gels are applied to improve reservoir conformance. FY92 experiments to determine surfactant/polymer interactions that might occur during field tests have been finalized. The results show that interactions do occur in mixtures containing both surfactant and polymer and that the interactions are characterized by inhomogeneity; however, this effect is not as severe in systems containing crude oil. Thermodynamic property measurements are now complete for the four-ring, nitrogen-containing aromatic compounds benzo[c]carbazole and benzo[c]phenanthridine. High-temperature heat capacity and critical property determinations by differential scanning calorimetry were started in August for a series of dimethylpyridines. Results of studies on the dimethylpyridines will provide a reliable basis for estimating the properties of a wide variety of substituted aromatic nitrogen compounds. Heat capacity and enthalpy measurements were completed for the four-ring naphthene compound, 5,6-dihydro-4H-benz[de]anthracene.

  9. 21 CFR 172.884 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Odorless light petroleum hydrocarbons. 172.884... § 172.884 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may be safely... liquid hydrocarbons derived from petroleum or synthesized from petroleum gases. The additive is...

  10. 21 CFR 178.3650 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Odorless light petroleum hydrocarbons. 178.3650... Production Aids § 178.3650 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may... derived from petroleum or synthesized from petroleum gases. The additive is chiefly...

  11. World petroleum systems with Jurassic source rocks

    SciTech Connect

    Klemme, H.D. )

    1993-11-08

    Fourteen petroleum systems with Upper Jurassic source rocks contain one quarter of the world's discovered oil and gas. Eleven other systems with Lower and Middle Jurassic source rocks presently have a minor but significant amount of discovered oil and gas. The purpose of this article is to review the systems geologically, describe their location in space and time on a continental scale, estimate their relative petroleum system recovery efficiencies, and outline the effect their essential elements and processes have on their petroleum plumbing.

  12. Kidney cancer and hydrocarbon exposures among petroleum refinery workers

    SciTech Connect

    Poole, C.; Dreyer, N.A.; Satterfield, M.H.; Levin, L.

    1993-12-01

    To evaluate the hypothesis of increased kidney cancer risk after exposure to hydrocarbons, especially those present in gasoline, we conducted a case-control study in a cohort of approximately 100,000 male refinery workers from five petroleum companies. A review of 18,323 death certificates identified 102 kidney cancer cases, to each of whom four controls were matched by refinery location and decade of birth. Work histories, containing an average of 15.7 job assignments per subject, were found for 98% of the cases and 94% of the controls. Tb each job, industrial hygienists assigned semiquantitative ratings for the intensity and frequency of exposures to three hydrocarbon categories: nonaromatic liquid gasoline distillates, aromatic hydrocarbons, and the more volatile hydrocarbons. Ratings of {open_quotes}present{close_quotes} or {open_quotes}absent{close_quotes} were assigned for seven additional exposures: higher boiling hydrocarbons, polynuclear aromatic hydrocarbons, asbestos, chlorinated solvents, ionizing radiation, and lead. Each exposure had either no association or a weak association with kidney cancer. For the hydrocarbon category of principal a priori interest, the nonaromatic liquid gasoline distillates, the estimated relative risk (RR) for any exposure above refinery background was 1.0 (95% confidence interval [CI] 0.5-1.9). Analyses of cumulative exposures and of exposures in varying time periods before kidney cancer occurrence also produced null or near-null results. In an analysis of the longest job held by each subject (average duration 9.2 years or 40% of the refiner&y work history), three groups appeared to be at increased risk: laborers (RR = 1.9,95% CI 1.0-3.9); workers in receipt, storage, and movements (RR = 2.5,95% CI 0.9-6.6); and unit cleaners (RR = 2.3, 95% CI 0.5-9.9). 53 refs., 7 tabs.

  13. Petroleum resource potential GIS of northern Afghanistan

    USGS Publications Warehouse

    Steinshouer, Douglas W.; Klett, Timothy R.; Ulmishek, Gregory F.; Wandrey, Craig J.; Wahl, Ronald R.; Hill, Ronald J.; Pribil, Michael J.; Pawlewicz, Mark J.; King, J. David; Agena, Warren F.; Taylor, David J.; Amirzada, Abdulla; Selab, Amir Mohammad; Mutteh, Abdul-Salam; Haidari, Ghulam Naqshband; Wardak, Moeengul Gullabudeen

    2006-01-01

    The CD-ROM contains an ESRI ArcReader format GIS project presenting the results of a petroleum resource assessment of Northern Afghanistan, and other data used in the petroleum assessment. Geologic, structural, field, well, political, and other GIS layers covering Afghanistan, Northern Afghanistan and adjacent areas, along with associated geochemical and other data tables pertinent to a petroleum assessment are included. The purpose of this GIS is to provide the basic data layers and tables required to support the petroleum assessment, data for further exploration and development, and an index of known data.

  14. Petroleum geology of the state of Washington

    USGS Publications Warehouse

    Johnson, Samuel Y.; Tennyson, Marilyn E.; Lingley, William S.; Law, Ben E.

    1997-01-01

    This report describes the potential petroleum resources of Washington State as recently summarized in the 1995 U.S. Geological Survey National Assessment of Oil and Gas Resources. Eight conventional petroleum plays, three coal-bed gas plays, and two continuous-type gas plays are defined and characterized. Of these plays, the potential for significant petroleum accumulations appears greatest in the Columbia Plateau region of eastern Washington. Potential accumulations in western Washington are smaller but could have local economic significance. The absence of high-quality petroleum source rocks is probably the most important factor limiting development of large accumulations.

  15. Petroleum supply annual, 1997. Volume 1

    SciTech Connect

    1998-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1997 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1997, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. 16 figs., 48 tabs.

  16. Petroleum supply annual 1994. Volume 1

    SciTech Connect

    1995-05-22

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1994 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. The second volume contains final statistics for each month of 1994, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Below is a description of each section in Volume 1 of the PSA.

  17. Petroleum supply annual 1993. Volume 1

    SciTech Connect

    Not Available

    1994-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1993 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. The second volume contains final statistics for each month of 1993, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Below is a description of each section in Volume 1 of the PSA.

  18. Strategic Petroleum Reserve annual/quarterly report

    SciTech Connect

    Not Available

    1993-02-16

    During 1992 the Department continued planning activities for the expansion of the Strategic Petroleum Reserve to one billion barrels. A draft Environmental Impact Statement for the five candidate sites was completed in October 1992, and a series of public hearings was held during December 1992. Conceptual design engineering activities, life cycle cost estimates and geotechnical studies to support the technical requirements for an Strategic Petroleum Reserve Plan Amendment were essentially completed in December 1992. At the end of 1992, the Strategic Petroleum Reserve crude oil inventory was 574.7 million barrels and an additional 1.7 million barrels was in transit to the Reserve. During 1992 approximately 6.2 million barrels of crude oil were acquired for the Reserve. A Department of Energy Tiger Team Environmental, Safety and Health (ES&H) Assessment was conducted at the Strategic Petroleum Reserve from March 9 through April 10, 1992. In general, the Tiger Team found that Strategic Petroleum Reserve activities do not pose undue environmental, safety or health risks. The Strategic Petroleum Reserve`s Final Corrective Action Plan, prepared in response to the Tiger Team assessment, was submitted for Department approval in December 1992. On November 18, 1992, the Assistant Secretary for Fossil Energy selected DynMcDennott Petroleum Operations Company to provide management and operating services for the Strategic Petroleum Reserve for a period of 5 years commencing April 1, 1993. DynMcDermott will succeed Boeing Petroleum Services, Inc.

  19. 31 CFR 542.208 - Prohibited importation of petroleum or petroleum products of Syrian origin.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Prohibited importation of petroleum or petroleum products of Syrian origin. 542.208 Section 542.208 Money and Finance: Treasury Regulations... SYRIAN SANCTIONS REGULATIONS Prohibitions § 542.208 Prohibited importation of petroleum or...

  20. Estimate of mercury emissions to the atmosphere from petroleum.

    PubMed

    Wilhelm, S M

    2001-12-15

    An estimate of the contribution of mercury to the atmospheric environment from petroleum processed in the United States is constructed from recent data. The estimate is based on a mass balance approach for mercury in crude oil, in refined products, and in waste streams (air, water, solid waste) from refineries. Although there are insufficient data at present to have a high degree of confidence in the mean amount and range of mercury concentrations in crude oil or in refined products, the framework of the estimate should assist direction for the acquisition of additional data. On the basis of selected data that put the estimated mean concentration of total mercury in crude oil close to 10 ppb, it is calculated that the total amount of mercury in U.S. petroleum processed yearly is slightly over 8000 kg/yr. Of this amount, approximately 6000 kg/yr is estimated to be emitted to the atmosphere from combustion of liquid hydrocarbon fuels, which represents about 10% of the U.S. yearly emission rate of atmospheric mercury from coal combustion. The material balance predicts that the amount of mercury in air emissions from all U.S. refineries is on the order of 1500 kg/yr based on the assumption that fugitive mercury emissions from refineries are negligible. Atmospheric emissions of mercury from fuel oil burned in the United States are estimated in the U.S. EPA Mercury Report to Congress to be approximately 10000 kg/yr, and this estimate may be in error on the high side by a factor of 3-10. If the mean amounts of mercury in U.S. distillate and residual fuel oils are in the range of 5-15 ppb, as suggested by more recent data, then U.S. fuel oil combustion should contribute no more that about 1000-3000 kg/yr (emission ratio = 1) of mercury to the atmospheric burden.

  1. Petroleum characterization by perfluorocarbon tracers

    SciTech Connect

    Senum, G.I.; Fajer, R.W. ); Harris, B.R. Jr. ); DeRose, W.E. ); Ottaviani, W.L. )

    1992-02-01

    Perfluorocarbon tracers (PFTs), a class of six compounds, were used to help characterize the Shallow Oil Zone (SOZ) reservoir at the Naval Petroleum Reserve in California (NPRC) at Elk Hills. The SOZ reservoir is undergoing a pilot gas injection program to assess the technical feasibility and economic viability of injecting gas into the SOZ for improved oil recovery. PFTs were utilized in the pilot gas injection to qualitatively assess the extent of the pilot gas injection so as to determine the degree of gas containment within the SOZ reservoir.

  2. Petroleum fingerprinting with organic markers

    USGS Publications Warehouse

    Hostettler, Frances D.; Lorenson, T.D.; Bekins, Barbara A.

    2013-01-01

    Petroleum fingerprinting is an invaluable tool in forensic geochemistry. This article summarizes applications of fingerprinting in several oil spills and natural oil seepages that we have studied during the last 25 years. It shows how each unique chemical fingerprint can be used to correlate or differentiate oils. Fingerprints can provide information about processes in the environment that impact oils such as weathering and microbial degradation. They can be used to evaluate organic matter that contributed to oils, and classify oils with regard to the geological framework of their source, such as evaluating geological facies, age, lithology, and depositional environment.

  3. Steam distillation effect and oil quality change during steam injection

    SciTech Connect

    Lim, K.T.; Ramey, H.J. Jr.; Brigham, W.E.

    1992-01-01

    Steam distillation is an important mechanism which reduces residual oil saturation during steam injection. It may be the main recovery mechanism in steamflooding of light oil reservoirs. As light components are distilled the residual (initial) oil, the residuum becomes heavier. Mixing the distilled components with the initial oil results in a lighter produced oil. A general method has been developed to compute steam distillation yield and to quantify oil quality changes during steam injection. The quantitative results are specific because the California crude data bank was used. But general principles were followed and calculations were based on information extracted from the DOE crude oil assay data bank. It was found that steam distillation data from the literature can be correlated with the steam distillation yield obtained from the DOE crude oil assays. The common basis for comparison was the equivalent normal boiling point. Blending of distilled components with the initial oil results in API gravity changes similar to those observed in several laboratory and field operations.

  4. Recovery of acetic acid from waste streams by extractive distillation.

    PubMed

    Demiral, H; Yildirim, M Ercengiz

    2003-01-01

    Wastes have been considered to be a serious worldwide environmental problem in recent years. Because of increasing pollution, these wastes should be treated. However, industrial wastes can contain a number of valuable organic components. Recovery of these components is important economically. Using conventional distillation techniques, the separation of acetic acid and water is both impractical and uneconomical, because it often requires large number of trays and a high reflux ratio. In practice special techniques are used depending on the concentration of acetic acid. Between 30 and 70% (w/w) acetic acid contents, extractive distillation was suggested. Extractive distillation is a multicomponent-rectification method similar in purpose to azeotropic distillation. In extractive distillation, to a binary mixture which is difficult or impossible to separate by ordinary means, a third component termed an entrainer is added which alters the relative volatility of the original constituents, thus permitting the separation. In our department acetic acid is used as a solvent during the obtaining of cobalt(III) acetate from cobalt(II) acetate by an electrochemical method. After the operation, the remaining waste contains acetic acid. In thiswork, acetic acid which has been found in this waste was recovered by extractive distillation. Adiponitrile and sulfolane were used as high boiling solvents and the effects of solvent feed rate/solution feed rate ratio and type were investigated. According to the experimental results, it was seem that the recovery of acetic acid from waste streams is possible by extractive distillation.

  5. Advances in mass spectrometric characterization of naphthenic acids fraction compounds in oil sands environmental samples and crude oil--A review.

    PubMed

    Headley, John V; Peru, Kerry M; Barrow, Mark P

    2016-01-01

    There has been a recent surge in the development of mass spectrometric methods for detailed characterization of naphthenic acid fraction compounds (all C(c)H(h)N(n)O(o)S(s), species, including heteroatomic and aromatic components in the acid-extractable fraction) in environmental samples. This surge is driven by the increased activity in oil sands environmental monitoring programs in Canada, the exponential increase in research studies on the isolation and toxicity identification of components in oil sands process water (OSPW), and the analytical requirements for development of technologies for treatment of OSPW. There has been additional impetus due to the parallel studies to control corrosion from naphthenic acids during the mining and refining of heavy bitumen and crude oils. As a result, a range of new mass spectrometry tools have been introduced since our last major review of this topic in 2009. Of particular significance are the developments of combined mass spectrometric methods that incorporate technologies such as gas chromatography, liquid chromatography, and ion mobility. There has been additional progress with respect to improved visualization methods for petroleomics and oil sands environmental forensics. For comprehensive coverage and more reliable characterization of samples, an approach based on multiple-methods that employ two or more ionization modes is recommended. On-line or off-line fractionation of isolated extracts, with or without derivatization, might also be used prior to mass spectrometric analyses. Individual ionization methods have their associated strengths and weaknesses, including biases, and thus dependence upon a single ionization method is potentially misleading. There is also a growing trend to not rely solely on low-resolution mass spectrometric methods (<20,000 resolving power at m/z 200) for characterization of complex samples. Future research is anticipated to focus upon (i) structural elucidation of components to determine

  6. [Evolution of technology and occupational exposures in petrochemical industry and in petroleum refining].

    PubMed

    Cottica, Danilo; Grignani, Elena

    2013-01-01

    The industry of oil refining and petrochemical play an important role in terms of number of employees in the Italian production. Often the terms "petroleum refining" and "petrochemical" are used interchangeably to define processes that occur in complex plants, which grow outdoors on large surfaces and a visual impact is not irrelevant. In reality, the two areas involve potential exposure to different chemical agents, related to raw materials processed and the specific products. The petrochemical uses as raw materials, the oil fractions, obtained by distillation in the refinery, or natural gas; petrochemical products are, usually, single compounds with a specific degree of purity, used as basic raw materials for the entire industry of organic chemistry, from the production of plastics to pharmaceuticals. The oil refining, that is the topic of this paper, processes mainly oil to obtain mixtures of hydrocarbon compounds, the products of which are specified on the basis of aptitude for use. For example gasolines, are obtained by mixing of fractions of the first distillation, reforming products, antiknock. The paper illustrates, necessarily broadly due to the complexity of the productive sectors, the technological and organizational changes that have led to a significant reduction of occupational exposure to chemical agents, the results of environmental monitoring carried out in some refineries both during routine conditions that during scheduled maintenance activities with plant shutdown and a store of petroleum products. The chemical agents measured are typical for presence, physico-chemical properties and toxicological characteristics of the manufacturing processes of petroleum products like benzene, toluene, xylenes, ethyl benzene, n-hexane, Volatile Hydrocarbons belonging to gasoline, kerosene, diesel fuel. Data related to both personal sampling and fixed positions.

  7. Improved waste water vapor compression distillation technology. [for Spacelab

    NASA Technical Reports Server (NTRS)

    Johnson, K. L.; Nuccio, P. P.; Reveley, W. F.

    1977-01-01

    The vapor compression distillation process is a method of recovering potable water from crewman urine in a manned spacecraft or space station. A description is presented of the research and development approach to the solution of the various problems encountered with previous vapor compression distillation units. The design solutions considered are incorporated in the preliminary design of a vapor compression distillation subsystem. The new design concepts are available for integration in the next generation of support systems and, particularly, the regenerative life support evaluation intended for project Spacelab.

  8. Vacuum membrane distillation: Experiments and modeling

    SciTech Connect

    Bandini, S.; Saavedra, A.; Sarti, G.C.

    1997-02-01

    Vacuum membrane distillation is a membrane-based separation process considered here to remove volatile organic compounds from aqueous streams. Microporous hydrophobic membranes are used to separate the aqueous stream from a gas phase kept under vacuum. The evaporation of the liquid stream takes place on one side of the membrane, and mass transfer occurs through the vapor phase inside the membrane. The role of operative conditions on the process performance is widely investigated in the case of dilute binary aqueous mixtures containing acetone, ethanol, isopropanol, ethylacetate, methylacetate, or methylterbutyl ether. Temperature, composition, flow rate of the liquid feed, and pressure downstream the membrane are the main operative variables. Among these, the vacuum-side pressure is the major design factor since it greatly affects the separation efficiency. A mathematical model description of the process is developed, and the results are compared with the experiments. The model is finally used to predict the best operative conditions in which the process can work for the case of benzene removal from waste waters.

  9. Investigation of Non-Petroleum Based Fuels

    DTIC Science & Technology

    2005-09-01

    to investigate Non-Petroleum Based Fuels and Lubricants for Advanced CIDI Automobile Engines, in two phases. The project began with a Planning...passenger car engine. Planning was to include defining the research necessary for future transitional non- petroleum fuel components that could also be

  10. Technology Roadmap for the Petroleum Industry

    SciTech Connect

    none,

    2000-02-01

    The petroleum refining industry defined a detailed R&D roadmap, Technology Roadmap for the Petroleum Industry, to identify high-priority areas for technology R&D. Those priorities helped ITP target cost-shared solicitations and guide development of a balanced R&D portfolio to yield useful results in the near, mid, and long-term.

  11. Petroleum supply annual 1993. Volume 2

    SciTech Connect

    Not Available

    1994-06-01

    This publication contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1993 through annual and monthly surveys. This second volume contains final statistics for each month of 1993.

  12. 75 FR 48320 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-10

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY National Petroleum Council AGENCY: Department of Energy, Office of Fossil Energy. ACTION: Notice of open meeting. SUMMARY: This notice announces a meeting of the National Petroleum Council. The Federal...

  13. 77 FR 2714 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-19

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY National Petroleum Council AGENCY: Office of Fossil Energy, Department of Energy. ACTION: Notice of Renewal... that the National Petroleum Council has been renewed for a two-year period, beginning January 12,...

  14. 31 CFR 561.318 - Petroleum.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Petroleum. 561.318 Section 561.318 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... § 561.318 Petroleum. A mixture of hydrocarbons that exists in liquid phase in natural...

  15. Detecting and discriminating petroleum and petroleum products from water on terrestrial backgrounds with hyperspectral remote sensing

    NASA Astrophysics Data System (ADS)

    Allen, C. Scott

    Petroleum and petroleum product spills are frequent and as both Hurricane Katrina and the Deepwater Horizon accident demonstrated, they can be catastrophic. A prominent portion of the response is mapping the extent to which oil has reached both shoreline and inland areas. Yet, petroleum and water--when present on common substrates such as sand, concrete, and vegetation--are often difficult to distinguish in panchromatic and multispectral imagery. This research demonstrates how hyperspectral remote sensing, also known as imaging spectroscopy, provides petroleum detection and discrimination from water on terrestrial backgrounds. Utilizing spectral libraries, it also performs material identification and successfully discriminates some petroleum products from one another as a means of further classification and mapping spill extent. To achieve these goals, this effort collected spectral signatures of four crude oils and five refined petroleum products on ten common terrestrial substrates and compared them to water on the same backgrounds over a period of 1-90 days, depending on liquid volatility. The result is the first publicly available spectral library for petroleum and petroleum products on terrestrial substrates in the reflective portion of the electromagnetic spectrum (400-2500 nm) for use in petroleum spill detection and response. It also establishes a baseline for the use of imaging spectroscopy as a technique for confident, accurate petroleum detection in the terrestrial environment. Using common material identification algorithms, the spectra were successfully applied to airborne hyperspectral data from the Hurricane Katrina disaster in 2005 as a proof-of-concept for discriminating petroleum from water.

  16. Energy Saving Separations Technologies for the Petroleum Industry: An Industry-University-National Laboratory Research Partnership

    SciTech Connect

    Dorgan, John R.; Stewart, Frederick F.; Way, J. Douglas

    2003-03-28

    This project works to develop technologies capable of replacing traditional energy-intensive distillations so that a 20% improvement in energy efficiency can be realized. Consistent with the DOE sponsored report, Technology Roadmap for the Petroleum Industry, the approach undertaken is to develop and implement entirely new technology to replace existing energy intensive practices. The project directly addresses the top priority issue of developing membranes for hydrocarbon separations. The project is organized to rapidly and effectively advance the state-of-the-art in membranes for hydrocarbon separations. The project team includes ChevronTexaco and BP, major industrial petroleum refiners, who will lead the effort by providing matching resources and real world management perspective. Academic expertise in separation sciences and polymer materials found in the Chemical Engineering and Petroleum Refining Department of the Colorado School of Mines is used to invent, develop, and test new membrane materials. Additional expertise and special facilities available at the Idaho National Engineering and Environmental Laboratory (INEEL) are also exploited in order to effectively meet the goals of the project. The proposed project is truly unique in terms of the strength of the team it brings to bear on the development and commercialization of the proposed technologies.

  17. 27 CFR 30.1 - Gauging of distilled spirits.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... correcting hydrometer indications at temperatures between 0 and 100 degrees Fahrenheit to true proof. If distilled spirits contain dissolved solids, temperature correction of the hydrometer reading by the use...

  18. 27 CFR 30.1 - Gauging of distilled spirits.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... correcting hydrometer indications at temperatures between 0 and 100 degrees Fahrenheit to true proof. If distilled spirits contain dissolved solids, temperature correction of the hydrometer reading by the use...

  19. 27 CFR 30.1 - Gauging of distilled spirits.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... correcting hydrometer indications at temperatures between 0 and 100 degrees Fahrenheit to true proof. If distilled spirits contain dissolved solids, temperature correction of the hydrometer reading by the use...

  20. 27 CFR 30.1 - Gauging of distilled spirits.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... correcting hydrometer indications at temperatures between 0 and 100 degrees Fahrenheit to true proof. If distilled spirits contain dissolved solids, temperature correction of the hydrometer reading by the use...