Science.gov

Sample records for nations industrial development

  1. National colloquium: developing national standards for industry, government, and academia

    NASA Astrophysics Data System (ADS)

    Schou, Corey D.; Maconachy, W. V.; Murray, William; Wilson, Mark A.

    1999-01-01

    The National Colloquium for Information Systems Security Education (the Colloquium) was established in 1997 to serve as a living body to bring government, industry, and academia together to meet the challenges of information security. All aspects of our lives and all aspects of our social, economic and political system are becoming increasingly dependent on our information and communications infrastructure. The security and assurance of our information and communications infrastructure should be a national priority. To address this, our nation needs an information-literate work force that is aware of its vulnerability, as well as a cadre of information professionals that are knowledgeable of the recognized 'best practices available in information security and information assurance, as called for in Presidential Decision Directive 63, May 22, 1998. It is the task of American higher education to provide that information- literate work force and to prepare information professions. To meet this priority, higher education must be informed of the knowledge, skills, and attitudes to be taught in the general curricula and in the information curricula of its colleges and universities. Industry and government must under their role in supporting higher education, not simply expecting higher education to be responsive and informed about information security and assurance.

  2. Rural Development: The Industrialized Free-Enterprise Nations.

    ERIC Educational Resources Information Center

    Economic Research Service (USDA), Washington, DC.

    Most of the nations of the world have expressed concern for rural revitalization by providing a greater range of economic opportunities, social amenities, and cultural advantages. This report discussed rural development in the highly industrialized nations of the Federal Republic of Germany, Italy, Belgium, the Netherlands, France, Norway,…

  3. National Skills Standards Development Program: Organization and Operation of Technical Committees To Develop National Skill Standards for Competency in the Electronics Industry. The Third Party Summative Evaluation of the Electronic Industries Foundation Project. Phase I & II. Final Report.

    ERIC Educational Resources Information Center

    Losh, Charles

    The Electronics Industries Foundation was awarded a project to develop national entry-level standards and a certification system. Ten specialties were included: automotive electronics, avionics, biomedical electronics, business machines, consumer products electronics, general electronics, industrial electronics, instrumentation, microcomputer, and…

  4. The role of marketing in matching industry needs with technologies developed at Oak Ridge National Laboratory

    SciTech Connect

    Prosser, G.A.

    1990-11-14

    National laboratories have limited resources to devote to the transfer of government-funded technologies to the commercial sector. Companies, too, face resource constraints in their attempt to identify and assimilate innovations which fit with their strategic objectives. For these reasons, persons engaged in technology transfer should attempt to identify laboratory developments which represent the best possible match with industry needs and focus their attention on those technologies which are most likely to make and impact in the marketplace. In a structured approach designed to meet this objective, Martin Marietta Energy Systems, which operates Oak Ridge National Laboratory for the Department of Energy, has established formal ties with the University of Tennessee Business School, to enhance the role of marketing for technology transfer. The school's MBA students continue to play a key role in the formulation and execution of plans designed to transform Oak Ridge technologies into new products, new jobs, and economic prosperity for US companies.

  5. Space industrialization: A national perspective

    NASA Technical Reports Server (NTRS)

    Reis, V. H.

    1984-01-01

    Space industrialization (or commercialization) has the potential to be a major player in America's space program. If this potential is to be realized, however, industrialization efforts must be considered within the context of the other major portions of the space program: shuttle, space station, and civil remote sensing. Further, development efforts must be based upon a sound scientific and technical understanding of the products and processes, and there must be a trained cadre of dedicated individuals willing to devote time and effort to this effort. There remain considerable risks and uncertainties. Given all this, the best path to follow would seem to be a long term, balanced commitment, emphasizing government, industry, and academia partnerships. Several points are addressed: (1) the place of space industrialization in the overall national space program; (2) the meaning of space industrialization with respect to the historic, national aims of space; and (3) specifically what is being industrialized.

  6. The Role of National Industry-Based Skill Standards in the Development, Implementation, and Assessment of Community College Curriculum

    ERIC Educational Resources Information Center

    Aragon, Steven R.; Woo, Hui-Jeong; Marvel, Matthew R.

    2005-01-01

    Using a descriptive survey design, a nationally representative sample of community college career and technical deans were asked to complete a questionnaire that assessed awareness and implementation of industry-based skill standards. For those institutions implementing industry-based skill standards, the questionnaire sought additional…

  7. Industry and Instructional Development.

    ERIC Educational Resources Information Center

    Wallington, Clint

    This chapter examines the current state of instructional development (ID) in business and industry, emphasizing the differences between ID in industry and in education. The competency studies of both the American Society for Testing and Development (ASTD) and the Association for Educational Communications and Technology (AECT) are considered, and…

  8. National R & D Policy: An Industrial Perspective.

    ERIC Educational Resources Information Center

    Schmitt, Roland W.

    1984-01-01

    An analysis of how the government can and cannot use research and development (R&D) policy to improve the nation's industrial posture suggests four guidelines for federal R&D policy. These guidelines are outlined and discussed. Areas analyzed include federal role; competition from Japan; support for university research, immigration policy, and…

  9. [[Population and industrial development

    PubMed

    Charoenloet, V

    "Concurrent with the decline in population growth rate in the 1980s, Thailand experienced an unprecedented rate of economic growth....Such phenomenal economic growth has generally been attributed to the internationalization of the Thai economy through the rapid expansion of exports, foreign investment and tourism. However, industries in the manufacturing sector...tend to be resource-based and labour-intensive. Moreover, foreign investment in export-oriented industries tends to use Thailand as a base for assembling rather than producing goods and has been attracted primarily by cheap labour cost. All these may contribute to the employment of [a] nonskilled, lowly-paid labour force, but not the development of scientific/technology based industries, the foundation for permanent and lasting economic development." (SUMMARY IN ENG)

  10. Recent developments: Industry briefs

    SciTech Connect

    1992-02-01

    This is the February 1992 `Industry Briefs` portion of the `Recent Developments` section. Issues mentioned are: (1) closure of San Onofre Unit 1, (2) start-up of Penly Unit 2, (3) signing of a safeguards agreement with North Korea, (4) Canadian nuclear activities in Romania, and (5) the merger of two Japanese fuel cycle companies.

  11. Recent developments: Industry briefs

    SciTech Connect

    1992-04-01

    This article is the `Industry Briefs` portion of Nuexco`s April 1992 `Recent Developments` section. Items covered in this article include: (1) France`s SILVA enrichment process, (2) 1993 US enrichment prices, (3) relicensing plans for Monticello, (4) a reactor incident at Sosnovy Bor 3, (5) Canadian agreements on Uranium mining, (6) China`s ascession to the Nuclear Non-proliferation Treaty, (7) settlement of the lawsuit between Westinghouse and the Philipines, (8) political reforms on South Africa, and (9) establishment of an international agreement on dual-use export control policy.

  12. National Development Generates National Identities.

    PubMed

    Golob, Tea; Makarovič, Matej; Suklan, Jana

    2016-01-01

    The purpose of the article is to test the relationship between national identities and modernisation. We test the hypotheses that not all forms of identity are equally compatible with modernisation as measured by Human Development Index. The less developed societies are characterised by strong ascribed national identities based on birth, territory and religion, but also by strong voluntarist identities based on civic features selected and/or achieved by an individual. While the former decreases with further modernisation, the latter may either decrease or remain at high levels and coexist with instrumental supranational identifications, typical for the most developed countries. The results, which are also confirmed by multilevel regression models, thus demonstrate that increasing modernisation in terms of development contributes to the shifts from classical, especially ascribed, identities towards instrumental identifications. These findings are particularly relevant in the turbulent times increasingly dominated by the hardly predictable effects of the recent mass migrations. PMID:26841050

  13. National Development Generates National Identities

    PubMed Central

    2016-01-01

    The purpose of the article is to test the relationship between national identities and modernisation. We test the hypotheses that not all forms of identity are equally compatible with modernisation as measured by Human Development Index. The less developed societies are characterised by strong ascribed national identities based on birth, territory and religion, but also by strong voluntarist identities based on civic features selected and/or achieved by an individual. While the former decreases with further modernisation, the latter may either decrease or remain at high levels and coexist with instrumental supranational identifications, typical for the most developed countries. The results, which are also confirmed by multilevel regression models, thus demonstrate that increasing modernisation in terms of development contributes to the shifts from classical, especially ascribed, identities towards instrumental identifications. These findings are particularly relevant in the turbulent times increasingly dominated by the hardly predictable effects of the recent mass migrations. PMID:26841050

  14. System of cities dynamics in newly industrializing nations.

    PubMed

    Meyer, D R

    1986-01-01

    Rapid industrialization in such countries as Korea, Malaysia, and Taiwan suggests that the complex functional structures of cities in the periphery may appear early in development. This paper proposes a 4-stage framework for the dynamics of a system of cities in a developing country undergoing industrialization and encompassing both nonindustrial and industrial development. The synthesis is assessed with evidence from the newly industrializing Asian nations of Korea, Malaysia, and Taiwan. The 4 stages of cities' industrial change include 1) increasing primacy with industrial satellites, 2) increasing primacy with industrial satellites and nodal towns on a transport network, 3) rapidly increasing primacy with rapidly growing industrial satellites and nodal towns on the transport network, and 4) decreasing primacy with slowly growing industrial satellites and rapidly growing peripheral industrial towns. The 4-stage synthesis suggests that economic development in the periphery may occur even while the primate city maintains its hegemony over control and coordination functions. Peripheral industrial growth does not challenge this hegemony. The growth of industrial cities is, instead, part of a process of regional specialization in which the low cost labor in the periphery becomes an attraction for industry. These stages are not inevitable. Government efforts are necessary to develop rural areas in terms of social improvements (education and health), capital infrastructure (transportation and utilities), and fair payments to farmers for their outputs. These seem to be the lessons learned from the industrialization process in Korea, Malaysia, and Taiwan.

  15. Developing Industry-Sponsored Entrepreneurship Education Programmes. The Experiences of the Coca-Cola National Enterprise Award.

    ERIC Educational Resources Information Center

    Henry, Colette; Titterington, Albert; Wiseman, Kate

    1998-01-01

    A partnership among Dundalk Institute of Technology (Ireland), Coca Cola, and government encourages young entrepreneurs through formal education in business management, workshops, mentoring, and financial rewards provided by the corporation's National Enterprise Award. (SK)

  16. Industrial Code Development

    NASA Technical Reports Server (NTRS)

    Shapiro, Wilbur

    1991-01-01

    The industrial codes will consist of modules of 2-D and simplified 2-D or 1-D codes, intended for expeditious parametric studies, analysis, and design of a wide variety of seals. Integration into a unified system is accomplished by the industrial Knowledge Based System (KBS), which will also provide user friendly interaction, contact sensitive and hypertext help, design guidance, and an expandable database. The types of analysis to be included with the industrial codes are interfacial performance (leakage, load, stiffness, friction losses, etc.), thermoelastic distortions, and dynamic response to rotor excursions. The first three codes to be completed and which are presently being incorporated into the KBS are the incompressible cylindrical code, ICYL, and the compressible cylindrical code, GCYL.

  17. Idaho National Laboratory/Nuclear Power Industry Strategic Plan for Light Water Reactor Research and Development An Industry-Government Partnership to Address Climate Change and Energy Security

    SciTech Connect

    Electric Power Research

    2007-11-01

    The dual issues of energy security and climate change mitigation are driving a renewed debate over how to best provide safe, secure, reliable and environmentally responsible electricity to our nation. The combination of growing energy demand and aging electricity generation infrastructure suggests major new capacity additions will be required in the years ahead.

  18. Profiles of the National Industry Skills Standards Projects.

    ERIC Educational Resources Information Center

    Rahn, Mikala L., Comp.

    In an effort to develop a more uniform and comprehensive system of national skill standards, the U.S. Departments of Education and Labor have awarded grants to 22 technical committees, composed of representatives from business, labor, and education, in a variety of industries and occupations. These projects will begin proposing national standards…

  19. [Development, health-industrial complex and industrial policy].

    PubMed

    Gadelha, Carlos Augusto Grabois

    2006-08-01

    This paper puts health questions within the context of national development and industrial policy. It follows the idea of structuralist, Marxist and Schumpeterian approaches, in which industry and innovations form determining factors for the dynamism in capitalist economies and relative positions within the world economy. All countries that have developed and started to compete under better conditions with advanced countries have had an association between strong industry and an endogenous knowledge, learning and innovation base. However, in the field of health, this vision presents problems because business interests move according to the economic logic of profit rather than to meet health needs. The notion of the health-industrial complex is an attempt to provide a theoretical reference that enables linkage between two distinct types of logic: health and economic development. This study has sought to show, on the basis of foreign trade data, how disregard for the logic of health policy development has led to a situation of economic vulnerability in this sector, which may limit the objectives of universality, equality and comprehensiveness. Within this context, a cognitive and political break with these antagonistic visions that put health needs on one side and industrial needs on the other is proposed. A country that aims to reach a condition of development and independence requires strong innovative industries and an inclusive and universal health system, at the same time. PMID:16924298

  20. Recent developments: Industry briefs

    SciTech Connect

    1990-09-01

    Recent nuclear industry briefs are presented. These briefs include: Bechtel, Westinghouse and consumers form joint venture to operate Palisades; British Goverment to sell PowerGen in public offering; NPT conference opens in Geneva; Soviets buy US computers for nuclear safety; Cameco completes sale of interest in Rabbit Lake; Ebasco and CEGA each win defense reactor contract; East German utility takeover settled; Rio Algom shuts down Quirke and Panel early; and General Atomics buys Beverly mine.

  1. Recent developments: Industry briefs

    SciTech Connect

    1990-12-01

    Recent nuclear industry briefs are presented. These briefs include: uranium mine closures; all Ontario new reactor plans halted; B & W and GA form MHTGR fuel joint venture; Namibia seeks uranium sales in Japan; Minatco purchases remainder of Wolly Project; CGE agrees to relinquish control of Framatome; Oregon voter keep Trojan Nuclear Plant open; Soviets invited to Foratom meeting; court overrules NRC in licensing and training issues; Glencar exploration injoint venture with Hungarian mine; Soviet Union and Argentina to cooperate in breeder program; and German loads revive Atucha-2.

  2. Research and Development in Industry 1974.

    ERIC Educational Resources Information Center

    Chirichiello, John R.; And Others

    This report presents the results of the 1974 survey of industrial research and development and is the twentieth in a series extending back to 1953. Data on R&D expenditures and R&D scientists and engineers presented in this report were collected by the Bureau of the Census for the National Science Foundation, and cover the periods of 1956-74 and…

  3. Los Alamos National Security, LLC Request for Information from industrial entities that desire to commercialize Laboratory-developed Extremely Low Resource Optical Identifier (ELROI) tech

    SciTech Connect

    Erickson, Michael Charles

    2015-11-10

    Los Alamos National Security, LLC (LANS) is the manager and operator of the Los Alamos National Laboratory for the U.S. Department of Energy National Nuclear Security Administration under contract DE-AC52-06NA25396. LANS is a mission-centric Federally Funded Research and Development Center focused on solving the most critical national security challenges through science and engineering for both government and private customers.

  4. The National Association of Industrial Technology: Origins and Leadership for the Future.

    ERIC Educational Resources Information Center

    Strong, Shawn; Kassapoglou, Michail; Dugger, John; Rudisill, Alvin

    1999-01-01

    Describes the following aspects of the National Association of Industrial Technology: purpose, objectives, membership, historical development, administrative organization, structure, and future directions. (SK)

  5. Manpower development for the biomedical industry space.

    PubMed

    Goh, James C H

    2013-01-01

    The Biomedical Sciences (BMS) Cluster is one of four key pillars of the Singapore economy. The Singapore Government has injected research funding for basic and translational research to attract companies to carry out their commercial R&D activities. To further intensify the R&D efforts, the National Research Foundation (NRF) was set up to coordinate the research activities of different agencies within the larger national framework and to fund strategic R&D initiatives. In recent years, funding agencies began to focus on support of translational and clinical research, particularly those with potential for commercialization. Translational research is beginning to have traction, in particular research funding for the development of innovation medical devices. Therefore, the Biomedical Sciences sector is projected to grow which means that there is a need to invest in human capital development to achieve sustainable growth. In support of this, education and training programs to strengthen the manpower capabilities for the Biomedical Sciences industry have been developed. In recent years, undergraduate and graduate degree courses in biomedical engineering/bioengineering have been developing at a rapid rate. The goal is to train students with skills to understand complex issues of biomedicine and to develop and implement of advanced technological applications to these problems. There are a variety of career opportunities open to graduates in biomedical engineering, however regardless of the type of career choices, students must not only focus on achieving good grades. They have to develop their marketability to employers through internships, overseas exchange programs, and involvement in leadership-type activities. Furthermore, curriculum has to be developed with biomedical innovation in mind and ensure relevance to the industry. The objective of this paper is to present the NUS Bioengineering undergraduate program in relation to manpower development for the biomedical

  6. Manpower development for the biomedical industry space.

    PubMed

    Goh, James C H

    2013-01-01

    The Biomedical Sciences (BMS) Cluster is one of four key pillars of the Singapore economy. The Singapore Government has injected research funding for basic and translational research to attract companies to carry out their commercial R&D activities. To further intensify the R&D efforts, the National Research Foundation (NRF) was set up to coordinate the research activities of different agencies within the larger national framework and to fund strategic R&D initiatives. In recent years, funding agencies began to focus on support of translational and clinical research, particularly those with potential for commercialization. Translational research is beginning to have traction, in particular research funding for the development of innovation medical devices. Therefore, the Biomedical Sciences sector is projected to grow which means that there is a need to invest in human capital development to achieve sustainable growth. In support of this, education and training programs to strengthen the manpower capabilities for the Biomedical Sciences industry have been developed. In recent years, undergraduate and graduate degree courses in biomedical engineering/bioengineering have been developing at a rapid rate. The goal is to train students with skills to understand complex issues of biomedicine and to develop and implement of advanced technological applications to these problems. There are a variety of career opportunities open to graduates in biomedical engineering, however regardless of the type of career choices, students must not only focus on achieving good grades. They have to develop their marketability to employers through internships, overseas exchange programs, and involvement in leadership-type activities. Furthermore, curriculum has to be developed with biomedical innovation in mind and ensure relevance to the industry. The objective of this paper is to present the NUS Bioengineering undergraduate program in relation to manpower development for the biomedical

  7. Session: Wind industry project development

    SciTech Connect

    Gray, Tom; Enfield, Sam

    2004-09-01

    This first session at the Wind Energy and Birds/Bats workshop consisted of two presentations followed by a question and answer period. The session was intended to provide a general overview of wind energy product development, from the industry's perspective. Tom Gray of AWEA presented a paper titled ''State of the Wind Energy Industry in 2004'', highlighting improved performance and lower cost, efforts to address avian impacts, a status of wind energy in comparison to other energy-producing sources, and ending on expectations for the near future. Sam Enfield of Atlantic Renewable Energy Corporation presented a paper titled ''Key Factors for Consideration in Wind Plant Siting'', highlighting factors that wind facility developers must consider when choosing a site to build wind turbines and associated structures. Factors covered include wind resources available, ownership and land use patterns, access to transmission lines, accessibility and environmental impacts. The question and answer sum mary included topics related to risk taking, research and development, regulatory requirements, and dealing with utilities.

  8. Advanced Energy Industries, Inc. SEGIS developments.

    SciTech Connect

    Scharf, Mesa P.; Bower, Ward Isaac; Mills-Price, Michael A.; Sena-Henderson, Lisa; David, Carolyn; Akhil, Abbas Ali; Kuszmaul, Scott S.; Gonzalez, Sigifredo

    2012-03-01

    The Solar Energy Grid Integration Systems (SEGIS) initiative is a three-year, three-stage project that includes conceptual design and market analysis (Stage 1), prototype development/testing (Stage 2), and commercialization (Stage 3). Projects focus on system development of solar technologies, expansion of intelligent renewable energy applications, and connecting large-scale photovoltaic (PV) installations into the electric grid. As documented in this report, Advanced Energy Industries, Inc. (AE), its partners, and Sandia National Laboratories (SNL) successfully collaborated to complete the final stage of the SEGIS initiative, which has guided new technology development and development of methodologies for unification of PV and smart-grid technologies. The combined team met all deliverables throughout the three-year program and commercialized a broad set of the developed technologies.

  9. Oklahoma Space Industry Development Authority

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The purpose of this grant was to increase the awareness of students of space sciences and commerce through experimentation. This objective was carried out through the award and administration, by OSIDA, the Oklahoma Space Industry Development Authority, of eleven smaller grants to fund thirteen projects at schools determined by competitive application. Applications were graded on potential outreach, experimentation objectives and impact on students' awareness of space sciences. We chose projects from elementary, middle and high schools as well as colleges that would encourage students through research and experimentation to consider education and careers in related disciplines. Each organization did not receive an equal share of the grant; instead, OSIDA distributed the money to each project based on the organization's need. A copy of the dispersement record is enclosed with this final grant report. The projects covered topics such as: space colonization, space stations, constellations, model rocketry, and space commerce.

  10. [Chinese Sanqi industry status and development countermeasures].

    PubMed

    Cui, Xiu-Ming; Huang, Lu-Qi; Guo, Lan-Ping; Liu, Da-Hui

    2014-02-01

    Sanqi (Panax notoginseng) is a valuable unique herb, and is also one of the very fast developed varieties of traditional Chinese medicines in recent years with increasing role in traditional Chinese medicine industry. This paper summarized the main experience, industry development and present situation, pointed out the main problems existing in the industry development. On this basis, we put forward the targets and measures for the development of the Sanqi industry in to provide decision-making reference for the sustainable development of the Sanqi industry in China.

  11. Role of national labs in energy and environmental R & D: An industrial perspective

    SciTech Connect

    Vaz, N.

    1995-12-31

    The perceived role of national laboratories in energy and environmental research and development is examined from an industrial perspective. A series of tables are used to summarize issues primarily related to the automotive industry. Impacts of policy on energy, environment, society, and international competition are outlined. Advances and further needs in automotive efficiency and pollution control, and research roles for national labs and industry are also summarized. 6 tabs.

  12. Physics and Industrial Development - Proceedings of the 2nd International Conference on Physics and Industrial Development

    NASA Astrophysics Data System (ADS)

    Gazzinelli, R.; Moreira, R. L.; Rodrigues, W. N.

    1997-04-01

    The Table of Contents for the full book PDF is as follows: * Preface * Sponsors * Committees * Opening Lecture * Relations between Science and Industry in Brazil * Technological Change and Economic Development * Science and Economic Development * Recent Technological Change and Industrial Dynamics * Technology and Economic Development: Suitability of the Institutional System of Minais Gerais * Bridging the Gap * Transfer of Scientific Results into Industry: A Controversial Problem in Central and Eastern Europe * Bridging the Gap Between Basic Research and Industrial Development at the J. STEFAN Institute * Liquid Crystals: A Case Study of the Interaction Between Science and Application * Role of Physics in the Modern Industrialization Process of Korea * Research in Industry * A Theoretical Physicist's 21-Year Experience in the Argentine Industry * Four Characters in Search of a Profession * Status and Prospects for the Use of Renewable Sources of Energy in Minas Gerais State-Brazil * University-Industry Cooperation I * Development and Industrialization of Fiber Optics Metrology Equipment * Finnish Experiences on University-Industry Collaboration in Materials Science and Physical Metallurgy * A Conceptual Framework for Understanding the Interaction between Academic Research and Industry * Technological Modernization of the Alkaline Cooking Process for the Production of Masa and Tortilla * The Fapergs Program on University Versus Private Enterprise * Integral Development Centers: Tying Mexican Industry With the National Polytechnic Institute * Materials Characterization and Applied Physics * Imaging Manganese Sulfide Inclusions in Grain Oriented Silicon Steels * Electrical Resistivity Changes Associated to Static Strain Aging in High Carbon Steel * PVD Hard Coatings for Wear Applications * Scanning Acoustic Microscopy: Application to Porous Materials * Indentation Testing of Thennal Sprayed WC-Co * Applications of Capillary Electrophoresis with Laserinduced

  13. National Developments in Rehabilitation.

    ERIC Educational Resources Information Center

    Skelley, Thomas J.; TenHoor, William J.

    1980-01-01

    As legislation permits, the state and federal rehabilitation programs have become increasingly involved in rehabilitation of psychiatrically disabled persons. The National Institute of Mental Health and the Rehabilitation Services Administration cooperate to implement federal policy in a number of programs. (JAC)

  14. Future float zone development in industry

    NASA Technical Reports Server (NTRS)

    Sandfort, R. M.

    1980-01-01

    The present industrial requirements for float zone silicon are summarized. Developments desired by the industry in the future are reported. The five most significant problems faced today by the float zone crystal growth method in industry are discussed. They are economic, large diameter, resistivity uniformity, control of carbon, and swirl defects.

  15. 76 FR 66932 - The National Cancer Institute (NCI) Announces the Initiation of a Public Private Industry...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-28

    ... Initiation of a Public Private Industry Partnership on Translation of Nanotechnology in Cancer (TONIC) To Promote Translational Research and Development Opportunities of Nanotechnology-Based Cancer Solutions AGENCY: National Cancer Institute (NCI), Office of Cancer Nanotechnology Research (OCNR),...

  16. 1. INDUSTRIAL IRON (WORKING SIDE). Hot Springs National Park, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. INDUSTRIAL IRON (WORKING SIDE). - Hot Springs National Park, Bathhouse Row, Quapaw Bathhouse: Mechanical & Piping Systems, State Highway 7, 1 mile north of U.S. Highway 70, Hot Springs, Garland County, AR

  17. Developing National Biosecurity Systems

    SciTech Connect

    Mahy, Heidi A.

    2008-03-05

    Biosecurity literally means ‘safe life’ and encompasses all policies and measures taken to secure humans, animals and plants against biological threats regardless of whether they are naturally-occurring or man-made. This includes the prevention, detection and mitigation of damage by disease, pests and bioterrorism to economies, the environment (including water, agriculture, biodiversity) and human and animal health. Biosecurity cannot be defined singularly; rather it is the sum of government policies and programs; the role of institutions and individuals; the relationship of businesses and bio-responsibility, education and community engagement at the local, national and international levels.

  18. Chaos theory perspective for industry clusters development

    NASA Astrophysics Data System (ADS)

    Yu, Haiying; Jiang, Minghui; Li, Chengzhang

    2016-03-01

    Industry clusters have outperformed in economic development in most developing countries. The contributions of industrial clusters have been recognized as promotion of regional business and the alleviation of economic and social costs. It is no doubt globalization is rendering clusters in accelerating the competitiveness of economic activities. In accordance, many ideas and concepts involve in illustrating evolution tendency, stimulating the clusters development, meanwhile, avoiding industrial clusters recession. The term chaos theory is introduced to explain inherent relationship of features within industry clusters. A preferred life cycle approach is proposed for industrial cluster recessive theory analysis. Lyapunov exponents and Wolf model are presented for chaotic identification and examination. A case study of Tianjin, China has verified the model effectiveness. The investigations indicate that the approaches outperform in explaining chaos properties in industrial clusters, which demonstrates industrial clusters evolution, solves empirical issues and generates corresponding strategies.

  19. National Apprenticeship Standards for the Retail Meatcutting Industry. Revised.

    ERIC Educational Resources Information Center

    Employment and Training Administration (DOL), Washington, DC. Bureau of Apprenticeship and Training.

    These national standards are intended to serve as a guide for the establishment of thorough and complete apprenticeship programs to produce trained retail meatcutters to carry on the tradition of quality in the retail meatcutting industry. Covered in the individual sections are the following topics: definitions, the National Joint Apprenticeship…

  20. Bilingualism and National Development.

    ERIC Educational Resources Information Center

    Jones, Gary M., Ed.; Ozog, A. Conrad K., Ed.

    1993-01-01

    The subject of bilingualism is especially important in Bruni, a country with a multilingual population and a bilingual education policy, and it was felt that an international conference which examined bilingualism and bilingual education in a variety of 'development' contexts would be useful in reviewing and fine tuning of Bruneis' already…

  1. Energy Saving Separations Technologies for the Petroleum Industry: An Industry-University-National Laboratory Research Partnership

    SciTech Connect

    Dorgan, John R.; Stewart, Frederick F.; Way, J. Douglas

    2003-03-28

    This project works to develop technologies capable of replacing traditional energy-intensive distillations so that a 20% improvement in energy efficiency can be realized. Consistent with the DOE sponsored report, Technology Roadmap for the Petroleum Industry, the approach undertaken is to develop and implement entirely new technology to replace existing energy intensive practices. The project directly addresses the top priority issue of developing membranes for hydrocarbon separations. The project is organized to rapidly and effectively advance the state-of-the-art in membranes for hydrocarbon separations. The project team includes ChevronTexaco and BP, major industrial petroleum refiners, who will lead the effort by providing matching resources and real world management perspective. Academic expertise in separation sciences and polymer materials found in the Chemical Engineering and Petroleum Refining Department of the Colorado School of Mines is used to invent, develop, and test new membrane materials. Additional expertise and special facilities available at the Idaho National Engineering and Environmental Laboratory (INEEL) are also exploited in order to effectively meet the goals of the project. The proposed project is truly unique in terms of the strength of the team it brings to bear on the development and commercialization of the proposed technologies.

  2. A Comparative Analysis of Information on National Industrial R&D Expenditures. Special Report.

    ERIC Educational Resources Information Center

    Burke, Mary V.

    The National Science Foundation (NSF) annually publishes information generated by its survey of research and development (R&D) expenditures by United States industry. These data are collected for NSF by the U.S. Bureau of the Census. Other organizations also publish information on industrial R&D expenditures collected by surveys or derived from…

  3. Physics and Industrial Development - Proceedings of the 2nd International Conference on Physics and Industrial Development

    NASA Astrophysics Data System (ADS)

    Gazzinelli, R.; Moreira, R. L.; Rodrigues, W. N.

    1997-04-01

    The Table of Contents for the full book PDF is as follows: * Preface * Sponsors * Committees * Opening Lecture * Relations between Science and Industry in Brazil * Technological Change and Economic Development * Science and Economic Development * Recent Technological Change and Industrial Dynamics * Technology and Economic Development: Suitability of the Institutional System of Minais Gerais * Bridging the Gap * Transfer of Scientific Results into Industry: A Controversial Problem in Central and Eastern Europe * Bridging the Gap Between Basic Research and Industrial Development at the J. STEFAN Institute * Liquid Crystals: A Case Study of the Interaction Between Science and Application * Role of Physics in the Modern Industrialization Process of Korea * Research in Industry * A Theoretical Physicist's 21-Year Experience in the Argentine Industry * Four Characters in Search of a Profession * Status and Prospects for the Use of Renewable Sources of Energy in Minas Gerais State-Brazil * University-Industry Cooperation I * Development and Industrialization of Fiber Optics Metrology Equipment * Finnish Experiences on University-Industry Collaboration in Materials Science and Physical Metallurgy * A Conceptual Framework for Understanding the Interaction between Academic Research and Industry * Technological Modernization of the Alkaline Cooking Process for the Production of Masa and Tortilla * The Fapergs Program on University Versus Private Enterprise * Integral Development Centers: Tying Mexican Industry With the National Polytechnic Institute * Materials Characterization and Applied Physics * Imaging Manganese Sulfide Inclusions in Grain Oriented Silicon Steels * Electrical Resistivity Changes Associated to Static Strain Aging in High Carbon Steel * PVD Hard Coatings for Wear Applications * Scanning Acoustic Microscopy: Application to Porous Materials * Indentation Testing of Thennal Sprayed WC-Co * Applications of Capillary Electrophoresis with Laserinduced

  4. Telecommunications and the Travel Industry: Impacts on National and Regional Development. Papers Presented at the Mid-Year Seminar of the Pacific Telecommunications Council (Bali, Indonesia, May 1991).

    ERIC Educational Resources Information Center

    Harms, L. S., Ed.

    This report of the Mid-Year Seminar of the Pacific Telecommunications Council (PTC) conference contains papers focusing on the use of telecommunications in the travel and tourism industries. After the message of welcome, opening remarks, and comments on the seminar, papers are divided and listed in five categories. First is The Indonesian Case:…

  5. Research and development in the textile industry

    SciTech Connect

    1987-06-01

    Included in the portfolio of IP's projects are the R and D activities for several advanced technologies targeted at the textile industry, one of the top ten energy intensive industries in the country. These R and D projects have primarily been aimed at improving the energy efficiency and productivity of textile production processes. Many projects in this area have been successfully completed, and some have resulted in the development and implementation of new technologies (e.g., foam processing) for various process steps. Other projects have produced technical results that have later been utilized by the industry in other capacities (e.g., hyperfiltration). Several projects at various stages of development are currently underway. This brochure describes the Office of Industrial Programs' R and D activities relevant to the textile industry. The brochure is comprised of the following: Industry Update, Energy Consumption in the Textile Industry, Energy Consumption in the Textile Industry, Potential Energy Savings in the Textile Industry, Office of Industrial Programs, R and D Efforts, and R and D Data Base.

  6. The role of the space industry in building capacity in emerging space nations

    NASA Astrophysics Data System (ADS)

    Esterhazy, David

    2009-11-01

    The space industry in established space-faring nations is playing an increasingly important role in the development of capacity in emerging space nations. The role of industry ranges from provision of turn-key systems, to provision of training and joint development of satellites in partnership with emerging space countries. Ranked number 1 worldwide in terms of satellites ordered in 2006, Thales Alenia Space is at the heart of the most high performance satellite technologies in both civil and defense sectors. The company has been involved in parterships with a number of emerging space nations. This paper discusses several key factors for successful interaction of industry with national space programmes in emerging space nations.

  7. Industry and Day Care II. Proceedings of the National Conference on Industry and Day Care (2nd, March, 1972, Chicago, Illinois).

    ERIC Educational Resources Information Center

    Schatz, Eunice, Ed.; Flaum, Thea K., Ed.

    The Second National Conference on Industry and Day Care, sponsored by Urban Research Corporation in 1970, brought together representatives of industry, community agencies, and early childhood specialists to discuss mutual concerns and explore the role that industry might play in the development of child care services. The report lists 17 ways in…

  8. Hazards in cottage industries in developing countries.

    PubMed

    McCann, M

    1996-08-01

    Occupational health and safety research and prevention programs in developing countries have focused almost exclusively on large-scale industries. The informal sector--especially home-based arts and crafts industries such as pottery, jewelry, weaving, and woodworking, as well as other cottage industries--are a major and neglected part of the economies of developing countries. These industries have many hazards, including lead, silica, toxic woods, cadmium, dyes, and ergonomic problems. Since the work is often done in the home and can involve whole families, the entire family, including children, can be at risk. Prevention programs involving training and education about the hazards, suitable precautions, and development of safer substitutes are needed. This will also require training of local health care providers in the diagnosis and treatment of occupational diseases related to hazards in these cottage industries. PMID:8844041

  9. Public Sector Industrial Relations: Recent Developments.

    ERIC Educational Resources Information Center

    Beaumont, Phil; Leopold, John

    1985-01-01

    This issue reviews trends in public sector employment (particularly in the light of government policy to reduce it), wages (in a context of cash limits), and strikes and other forms of industrial action. It also considers recent developments in the structure, organization, and policy of the "actors" in public sector industrial relations. (CT)

  10. Developing Closer Ties with the Pharmaceutical Industry.

    ERIC Educational Resources Information Center

    Reid, Gregor; Hoddinott, Susan

    1991-01-01

    The need for research administrators to understand and appreciate the pharmaceutical industry's research and development environment is discussed, using examples from Canada. The research administrator's role in the technology transfer process and implications for faculty are examined. Ways to build closer school-industry ties are discussed. (MSE)

  11. Developing a Package Training System for Industry

    ERIC Educational Resources Information Center

    Battersby, D. L. N.

    1974-01-01

    The hotel and catering industry is one of Great Britain's largest. A packaged training system has been developed to satisfy the needs of this industry, an ever-growing occupational field with multiple categories. The material provided in each package outlines short pieces of instruction and helps the trainer create appropriate training. (DS)

  12. 7 CFR 1260.113 - Established national nonprofit industry-governed organizations.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 10 2011-01-01 2011-01-01 false Established national nonprofit industry-governed... national nonprofit industry-governed organizations. Established national nonprofit industry-governed... directors representing the cattle or beef industry on a national basis; and (c) Were active and...

  13. 7 CFR 1260.113 - Established national nonprofit industry-governed organizations.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 10 2013-01-01 2013-01-01 false Established national nonprofit industry-governed... national nonprofit industry-governed organizations. Established national nonprofit industry-governed... directors representing the cattle or beef industry on a national basis; and (c) Have been active and...

  14. 7 CFR 1260.113 - Established national nonprofit industry-governed organizations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Established national nonprofit industry-governed... national nonprofit industry-governed organizations. Established national nonprofit industry-governed... directors representing the cattle or beef industry on a national basis; and (c) Were active and...

  15. 7 CFR 1260.113 - Established national nonprofit industry-governed organizations.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 10 2012-01-01 2012-01-01 false Established national nonprofit industry-governed... national nonprofit industry-governed organizations. Established national nonprofit industry-governed... directors representing the cattle or beef industry on a national basis; and (c) Were active and...

  16. 7 CFR 1260.113 - Established national nonprofit industry-governed organizations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 10 2014-01-01 2014-01-01 false Established national nonprofit industry-governed... national nonprofit industry-governed organizations. Established national nonprofit industry-governed... directors representing the cattle or beef industry on a national basis; and (c) Have been active and...

  17. Research by industry at the National Synchrotron Light Source

    SciTech Connect

    1995-05-01

    The world`s foremost facility for research using x-rays and ultraviolet and infrared radiation, is operated by the National Synchrotron Light Source dept. This pamphlet described the participating research teams that built most of the beam lines, various techniques for studying materials, treatment of materials, and various industrial research (catalysis, pharmaceuticals, etc.).

  18. Working Conditions in the Industrial Nations: What Lies Ahead?

    ERIC Educational Resources Information Center

    Spyropoulos, Georges

    1984-01-01

    Over the past 15 years, traditional concepts of working conditions and of work have been challenged in industrialized nations. The improvement of working conditions has become a basic issue, affected by the economic situation, technological advances, social climate, labor relations, and individual behavior. (Author/SK)

  19. Trade and Industry in History. National History Day, 1982.

    ERIC Educational Resources Information Center

    Womack, Miriam L.; And Others

    Presented are winning essays written by junior and senior high school students for the historical paper category of the 1982 National History Day program contest. This unique program encourages young people to explore a historical subject related to a specific theme. The winning papers, responding to the 1982 theme of trade and industry in…

  20. 75 FR 1566 - National Industrial Security Program Directive No. 1

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-12

    ... rule FR Doc. E9-28517, beginning on page 62531 in the issue of November 30, 2009, make the following... RECORDS ADMINISTRATION Information Security Oversight Office 32 CFR Part 2004 RIN 3095-AB34 National Industrial Security Program Directive No. 1 AGENCY: Information Security Oversight Office, NARA....

  1. Learning & Growing: Integrating Technology Undergraduates into the Development of an Industrial Case Study

    ERIC Educational Resources Information Center

    Newton, Kathryne; Schmidt, Edie

    2004-01-01

    A national industrial distribution association approached the authors to develop a case study for its association members. The national association assumed responsibility for identifying educational needs of upper level, mid level, and lower level personnel in the industry. In the previous year, a case study had been developed to educate upper…

  2. 32 CFR 2004.20 - National Industrial Security Program Operating Manual (NISPOM) [201(a)].

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 6 2011-07-01 2011-07-01 false National Industrial Security Program Operating... INFORMATION SECURITY OVERSIGHT OFFICE, NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Operations § 2004.20 National Industrial Security Program Operating...

  3. 32 CFR 2004.20 - National Industrial Security Program Operating Manual (NISPOM) [201(a)].

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 6 2013-07-01 2013-07-01 false National Industrial Security Program Operating... INFORMATION SECURITY OVERSIGHT OFFICE, NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Operations § 2004.20 National Industrial Security Program Operating...

  4. 32 CFR 2004.20 - National Industrial Security Program Operating Manual (NISPOM) [201(a)].

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 6 2012-07-01 2012-07-01 false National Industrial Security Program Operating... INFORMATION SECURITY OVERSIGHT OFFICE, NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Operations § 2004.20 National Industrial Security Program Operating...

  5. 32 CFR 2004.20 - National Industrial Security Program Operating Manual (NISPOM) [201(a)].

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 6 2014-07-01 2014-07-01 false National Industrial Security Program Operating... INFORMATION SECURITY OVERSIGHT OFFICE, NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Operations § 2004.20 National Industrial Security Program Operating...

  6. 32 CFR 2004.20 - National Industrial Security Program Operating Manual (NISPOM) [201(a)].

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false National Industrial Security Program Operating... INFORMATION SECURITY OVERSIGHT OFFICE, NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Operations § 2004.20 National Industrial Security Program Operating...

  7. 76 FR 67484 - National Industrial Security Program Policy Advisory Committee (NISPPAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-01

    ... From the Federal Register Online via the Government Publishing Office NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Information Security Oversight Office National Industrial Security Program Policy... meeting to discuss National Industrial Security Program policy matters. DATES: The meeting will be held...

  8. 76 FR 28099 - National Industrial Security Program Policy Advisory Committee (NISPPAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-13

    ... From the Federal Register Online via the Government Publishing Office NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Information Security Oversight Office National Industrial Security Program Policy... meeting to discuss National Industrial Security Program policy matters. DATES: The meeting will be held...

  9. 77 FR 34411 - National Industrial Security Program Policy Advisory Committee (NISPPAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-11

    ... From the Federal Register Online via the Government Publishing Office ] NATIONAL ARCHIVES AND RECORDS ADMINISTRATION National Industrial Security Program Policy Advisory Committee (NISPPAC) AGENCY... made for the following committee meeting. To discuss National Industrial Security Program...

  10. 76 FR 6636 - National Industrial Security Program Policy Advisory Committee (NISPPAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-07

    ... From the Federal Register Online via the Government Publishing Office NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Information Security Oversight Office National Industrial Security Program Policy... meeting. To discuss National Industrial Security Program policy matters. DATES: The meeting will be...

  11. Industrial Free Zones in the Dominican Republic: National vs. Local Impact.

    ERIC Educational Resources Information Center

    Sagawe, Thorsten

    1996-01-01

    Provides a concise overview on export-based, free zone development in the Dominican Republic by examining its influence on three spatial levels: national, regional, and town. Although industrial free zones contribute to job creation and foreign exchange earnings, local authorities are often unable to control urban development. (MJP)

  12. Carrying Out and Developing the Glass Industry Vision and Roadmap

    SciTech Connect

    Michael Greenman

    2007-06-14

    In support of its obligations under the above-mentioned project, the GMIC performed the following tasks: (1) Provided two-way communications liaison services between the U.S. glass industry and the D.O.E. to ensure the needs and concerns of each party are effectively communicated to the other. (2) Updated and modified on a continuing basis and in response to evolving conditions within the glass industry, the goals and priorities outlined in the Glass Industry Vision and the Glass Technology Roadmap. (3) Established relationships with a wide variety of government and non-governmental organizations with interests in further improving the levels of technology, productivity and environmental responsibility of the glass industry. (4) Canvassed the glass industry on an ongoing basis to determine overall and specific sector needs for technological development. (5) Fostered direct contacts between member companies and national laboratories to facilitate the development of individual company technology development. (6) Advised the DOE on the key elements of the solicitation process in support of the Glass Industry Vision and Technology Roadmap. In the course of this contract, the membership of the GMIC has grown to include over 70% of the glass industry. This gives it the ability to communicate persuasively with the vast majority of this energy intensive industry. One of the principal benefits of the existence of the GMIC is that, for the first time in this country, representative companies of all major sectors of the glass industry are now in regular communication with each other. Prior to the existence and activity of the GMIC, companies and individuals in the flat glass, container glass, fiber glass and specialty glass sectors rarely had contact with each other, in spite of the fact that they all face similar challenges and can benefit from pre-competitive research conducted to the benefit of the broad industry. The development of innovations in the industry under cost

  13. GELCASTING: From laboratory development toward industrial production

    SciTech Connect

    Omatete, O.O.; Janney, M.A.; Nunn, S.D.

    1995-07-01

    Gelcasting, a ceramic forming process, was developed to overcome some of the limitations of other complex-shape forming techniques such as injection molding and slip casting. In gelcasting, a concentrated slurry of ceramic powder in a solution of organic monomers is poured into a mold and then polymerized in-situ to form a green body in the shape of the mold cavity. Thus, it is a combination of polymer chemistry with slip processing and represents minimal departure from standard ceramic processing. The simplicity of the process has attracted industrial partners and by collaboration between them and the developers, the process is being advanced from the laboratory toward industrial production.

  14. Analysis on the Impact of Tax Policy over China's New Energy Industry Development

    NASA Astrophysics Data System (ADS)

    Xia, Bin; Li, Yang

    Energy is a kind of resource which can be used directly or offer people what they need by some conversions, the development of energy is the headspring of economic growth With the development of our national economy, new energy industry has become China's current vigorously the mainstream of development The analysis on influence of tax policy on the development of national new energy industry is mainly discussed, as well as the alternative analysis on the production output and sales tax aspects in the areas of new energy, and based on this, some tax policy suggestions on how to promote the development of national new energy industry are given finally.

  15. Model documentation report: Industrial sector demand module of the National Energy Modeling System

    SciTech Connect

    1997-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects. The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2015) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of industrial output. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  16. Course Development: Industrial or Social Process.

    ERIC Educational Resources Information Center

    Kaufman, David

    The development of course materials at the Open Learning Institute, British Columbia, Canada, is examined from two perspectives: as an industrial process and as a social process. The public institute provides distance education through paced home-study courses. The course team model used at the Institute is a system approach. Course development…

  17. Development of the Air Transport Industry

    NASA Technical Reports Server (NTRS)

    Taneja, N.

    1972-01-01

    The major developments are outlined in the U.S. scheduled air transport industry both domestic and international, together with a brief history of the European air transport system. The role and formulation of the U.S. Civil Aeronautics Board, International Civil Aviation Organization, and International Air Transport Association are also covered.

  18. Response to the National Career Development Strategy Green Paper

    ERIC Educational Resources Information Center

    Australian Journal of Career Development, 2012

    2012-01-01

    The National Career Development Strategy Green Paper paper proposes a strategy that is committed to these principles: (1) quality through Career Industry Council of Australia (CICA) benchmarking, quality frameworks and processes and as a risk management strategy; (2) lifetime access to career development services; (3) development of career…

  19. Technology transfer to a developing nation, Korea

    NASA Technical Reports Server (NTRS)

    Stone, C. A.; Uccetta, S. J.

    1973-01-01

    An experimental project is reported which was undertaken. to determine if selected types of technology developed for the aerospace program during the past decade are relevant to specific industrial problems of a developing nation and to test whether a structured program could facilitate the transfer of relevant technologies. The Korea Institute of Science and Technology and the IIT Research Institute were selected as the active transfer agents to participate in the program. The pilot project was based upon the approach to the transfer of domestic technology developed by the NASA Technology Utilization Division and utilized the extensive data and technical resources available through the Space Agency and its contractors. This pilot project has helped to clarify some aspects of the international technology transfer process and to upgrade Korean technological capabilities.

  20. African women, industrialization and another development. A global perspective.

    PubMed

    Steady, F C

    1982-01-01

    Historically, the women of Africa have been differentially integrated into the world economic system, serving primarily as a labor reserve and a mainstay for the subsistence and reproductive sectors. If and when necessary, female proletarianization can come into effect. African women, by virtue of their strategic role in traditional food systems, have acquired certain skills compatible with labor intensive food processing industries. Consequently, in some countries they have been involved in the handling, processing, and packing of food. In many 3rd world nations regulations protecting minimum wage levels do not exist and collective bargaining activities are not strongly in force. Economic hardship and the desperate need to survive can lead some groups to accept even lower wages. Consequently, although the employment of women at lower wages violates the principle of equal pay for equal work, agroindustries with monopolies can deliberately and with impunity hire women at lower wages than men. In general, when women are hired in industries the nature of their employment is precarious, frequently being of a casual and seasonal nature and in greatest demand during peak periods. In an effort to understand the implications of industrialization for African women a global perspective is necessary, for at present the incorporation of the African women in direct industrialization is minimal. Racism has played an important role in the exploitation of the African continent, and no serious study of class and gender inequality in Africa can overlook that important fact. Numerous studies have shown how industry perpetuates the sexual division of labor. Even in the industrialized nations, women often have held the least paid and most precarious jobs in industry. Women's vulnerability is further worsened by several factors, the most obvious being their reproductive capabilities. In addition to being more vulnerable to industrial hazards, their employment can be truncated by

  1. African women, industrialization and another development. A global perspective.

    PubMed

    Steady, F C

    1982-01-01

    Historically, the women of Africa have been differentially integrated into the world economic system, serving primarily as a labor reserve and a mainstay for the subsistence and reproductive sectors. If and when necessary, female proletarianization can come into effect. African women, by virtue of their strategic role in traditional food systems, have acquired certain skills compatible with labor intensive food processing industries. Consequently, in some countries they have been involved in the handling, processing, and packing of food. In many 3rd world nations regulations protecting minimum wage levels do not exist and collective bargaining activities are not strongly in force. Economic hardship and the desperate need to survive can lead some groups to accept even lower wages. Consequently, although the employment of women at lower wages violates the principle of equal pay for equal work, agroindustries with monopolies can deliberately and with impunity hire women at lower wages than men. In general, when women are hired in industries the nature of their employment is precarious, frequently being of a casual and seasonal nature and in greatest demand during peak periods. In an effort to understand the implications of industrialization for African women a global perspective is necessary, for at present the incorporation of the African women in direct industrialization is minimal. Racism has played an important role in the exploitation of the African continent, and no serious study of class and gender inequality in Africa can overlook that important fact. Numerous studies have shown how industry perpetuates the sexual division of labor. Even in the industrialized nations, women often have held the least paid and most precarious jobs in industry. Women's vulnerability is further worsened by several factors, the most obvious being their reproductive capabilities. In addition to being more vulnerable to industrial hazards, their employment can be truncated by

  2. Credentialism, National Targets, and the Learning Society: Perspectives on Educational Attainment in the UK Steel Industry.

    ERIC Educational Resources Information Center

    Fuller, Alison; Unwin, Lorna

    1999-01-01

    The UK's National Learning Targets for Education and Training, embracing 11- to 21-year-olds, adults, and employers, promote a credentialist approach to economic and social development. This article shows how the steel industry measures up. Using qualifications-based targets as a proxy for adult workforce capability is misguided. (Contains 40…

  3. Veterinary vaccine development from an industrial perspective.

    PubMed

    Heldens, J G M; Patel, J R; Chanter, N; Ten Thij, G J; Gravendijck, M; Schijns, V E J C; Langen, A; Schetters, Th P M

    2008-10-01

    Veterinary vaccines currently available in Europe and in other parts of the world are developed by the veterinary pharmaceutical industry. The development of a vaccine for veterinary use is an economic endeavour that takes many years. There are many obstacles along the path to the successful development and launch of a vaccine. The industrial development of a vaccine for veterinary use usually starts after the proof of concept that is based on robust academic research. A vaccine can only be made available to the veterinary community once marketing authorisation has been granted by the veterinary authorities. This review gives a brief description of the regulatory requirements which have to be fulfilled before a vaccine can be admitted to the market. Vaccines have to be produced in a quality controlled environment to guarantee delivery of a product of consistent quality with well defined animal and consumer safety and efficacy characteristics. The regulatory and manufacturing legislative framework in which the development takes place is described, as well as the trend in developments in production systems. Recent developments in bacterial, viral and parasite vaccine research and development are also addressed and the development of novel adjuvants that use the expanding knowledge of immunology and disease pathology are described.

  4. Pediatric asthma and ambient pollutant levels in industrializing nations.

    PubMed

    Jassal, Mandeep S

    2015-01-01

    Asthma is one of the most common chronic diseases in childhood and its prevalence has been increasing within industrializing nations. The contribution of ambient pollutants to asthma symptomatology has been explored in some countries through epidemiological investigations, molecular analysis and monitoring functional outcomes. The health effects of rising environmental pollution have been of increasing concern in industrializing nations with rising urbanization patterns. This review article provides an overview of the link between pediatric asthma and exposure to rising sources of urban air pollution. It primarily focuses on the asthma-specific effects of sulfur dioxide, nitrogen dioxide, ozone and particulate matter. Worldwide trends of asthma prevalence are also provided which detail the prominent rise in asthma symptoms in many urban areas of Africa, Latin America and Asia. The molecular and functional correlation of ambient pollutants with asthma-specific airway inflammation in the pediatric population are also highlighted. The final aspect of the review considers the correlation of motor vehicle, industrial and cooking energy sources, ascribed as the major emitters among the pollutants in urban settings, with asthma epidemiology in children.

  5. 77 FR 12623 - National Industrial Security Program Policy Advisory Committee (NISPPAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-01

    ... ] Industrial Security Program policy matters. Dated: February 23, 2012. Mary Ann Hadyka, Committee Management... From the Federal Register Online via the Government Publishing Office NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Information Security Oversight Office National Industrial Security Program...

  6. 75 FR 65526 - National Industrial Security Program Policy Advisory Committee (NISPPAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-25

    ... RECORDS ADMINISTRATION Information Security Oversight Office National Industrial Security Program Policy... committee meeting, to discuss National Industrial Security Program policy matters. DATES: The meeting will... Management Officer. BILLING CODE 7515-01-P...

  7. ASHRAE Standard 62: tobacco industry's influence over national ventilation standards

    PubMed Central

    Bialous, S; Glantz, S

    2002-01-01

    Objective: To describe the role of the tobacco industry in the development of ventilation standards for indoor air quality by influencing the American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE). Methods: Review of tobacco industry documents available on the internet between January 2001 and March 2002. Search terms included "ASHRAE", "ventilation", "minutes", "memo", and the names of key players and organisations as identified in the initial searches. Analysis of ASHRAE and other relevant documents publicly available and the personal files of a Standard 62 committee member; interviews of a selected number of ASHRAE players; observation of an ASHRAE meeting. Results: The tobacco industry has been involved in the development of ventilation standards for over 20 years. It has successfully influenced the standard and continues to attempt to change the standard from a smoke-free framework into an "accommodation" framework. The industry acts directly and through consultants and allies. The major health groups have been largely absent and the health interests have been poorly represented in standard development. While concentrated in the USA, ASHRAE standards are adopted worldwide. Conclusion: The tobacco industry determined that allowing smoking in ventilation standards for indoor air quality was a high priority and dedicated significant human and financial resources to ensure that its interests were represented. The health groups, until recently, have largely ignored the policy implications for tobacco control of standard development. This situation is changing, but unless health groups maintain high visibility within ASHRAE, the tobacco industry may succeed in creating a standard that ignores the dangers of secondhand smoke. PMID:12432157

  8. [Organization and management of nationalized pharmaceutical industry in Slovakia from 1945 to 1948].

    PubMed

    Senček, Richard R

    2013-02-01

    The paper discusses a short but important period in the history of pharmaceutical industry with regard to Slovakia. The complicated post-war situation required peremptory interventions from the state, which attempted to secure the operation of strategic firms by means of National Administration Boards and nationalization. The firms which were nationalized by this measure were managed by the Ministry of Industry. They included also the pharmaceutical firms nationalized in Slovakia. The situation which produced contradictory responses in society and political scene culminated in the communist coup detat and nationalization of virtually all industries.Key words: nationalization pharmaceutical industry Ministry of Industry.

  9. Industrial Scale Energy Systems Integration; NREL (National Renewable Energy Laboratory)

    SciTech Connect

    Ruth, Mark

    2015-07-28

    The industrial sector consumes 25% of the total energy in the U.S. and produces 18% of the greenhouse gas (GHG) emissions. Energy Systems Integration (ESI) opportunities can reduce those values and increase the profitability of that sector. This presentation outlines several options. Combined heat and power (CHP) is an option that is available today for many applications. In some cases, it can be extended to trigeneration by adding absorbtion cooling. Demand response is another option in use by the industrial sector - in 2012, industry provided 47% of demand response capacity. A longer term option that combines the benefits of CHP with those of demand response is hybrid energy systems (HESs). Two possible HESs are described and development implications discussed. extended to trigeneration by adding absorbtion cooling. Demand response is another option in use by the industrial sector - in 2012, industry provided 47% of demand response capacity. A longer term option that combines the benefits of CHP with those of demand response is hybrid energy systems (HESs). Two possible HESs are described and development implications discussed.

  10. 75 FR 39582 - National Industrial Security Program Policy Advisory Committee (NISPPAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-09

    ... RECORDS ADMINISTRATION Information Security Oversight Office National Industrial Security Program Policy... of the National Industrial Security Program Policy Advisory Committee. The meeting will be held to discuss National Industrial Security Program policy matters. DATES: The meeting will be held on July...

  11. Industrial ecology at Lawrence Livermore National Laboratory summary statement

    SciTech Connect

    Gilmartin, T.J.

    1996-05-21

    This statement summarizes Lawrence Livermore National Laboratory`s committment to making important scientific, technological, and business contributions to global sustainability. The quest has many aspects, some socio-political or economic and some technological, and some in which the soft and hard sciences become indistinguishable, as in visionary national strategies, like Holland`s, and futuristic regional and city development plans, like those of Kagoshima and Chattanooga.

  12. Model documentation report: Industrial sector demand module of the national energy modeling system

    SciTech Connect

    1998-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirements of the Energy Information Administration (EIA) to provide adequate documentation in support of its model. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects.

  13. 32 CFR 644.424 - Development of public port or industrial facilities.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... regulations published in the Federal Register 11 March 1961 (26 FR 2117-2118; 33 CFR 211.141 through 211.147... 32 National Defense 4 2010-07-01 2010-07-01 true Development of public port or industrial... Interests § 644.424 Development of public port or industrial facilities. (a) Authority. Section 108 of...

  14. 32 CFR 644.424 - Development of public port or industrial facilities.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... regulations published in the Federal Register 11 March 1961 (26 FR 2117-2118; 33 CFR 211.141 through 211.147... 32 National Defense 4 2013-07-01 2013-07-01 false Development of public port or industrial... Interests § 644.424 Development of public port or industrial facilities. (a) Authority. Section 108 of...

  15. 32 CFR 644.424 - Development of public port or industrial facilities.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... regulations published in the Federal Register 11 March 1961 (26 FR 2117-2118; 33 CFR 211.141 through 211.147... 32 National Defense 4 2014-07-01 2013-07-01 true Development of public port or industrial... Interests § 644.424 Development of public port or industrial facilities. (a) Authority. Section 108 of...

  16. 32 CFR 644.424 - Development of public port or industrial facilities.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... regulations published in the Federal Register 11 March 1961 (26 FR 2117-2118; 33 CFR 211.141 through 211.147... 32 National Defense 4 2012-07-01 2011-07-01 true Development of public port or industrial... Interests § 644.424 Development of public port or industrial facilities. (a) Authority. Section 108 of...

  17. 32 CFR 644.424 - Development of public port or industrial facilities.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... regulations published in the Federal Register 11 March 1961 (26 FR 2117-2118; 33 CFR 211.141 through 211.147... 32 National Defense 4 2011-07-01 2011-07-01 false Development of public port or industrial... Interests § 644.424 Development of public port or industrial facilities. (a) Authority. Section 108 of...

  18. Development of On-Board Fluid Analysis for the Mining Industry - Final report

    SciTech Connect

    Pardini, Allan F.

    2005-08-16

    Pacific Northwest National Laboratory (PNNL: Operated by Battelle Memorial Institute for the Department of Energy) is working with the Department of Energy (DOE) to develop technology for the US mining industry. PNNL was awarded a three-year program to develop automated on-board/in-line or on-site oil analysis for the mining industry.

  19. A case study in technology utilization: Industrial products and practices. [summary of benefits to national economy resulting from space programs

    NASA Technical Reports Server (NTRS)

    1973-01-01

    In pursuit of such missions as Apollo, the National Aeronautics and Space Administration has called into being unique equipment that obviously has little direct application beyond the achievement of mission objectives. Yet, to assume that further direct application of space program hardware is somehow a measure of the industrial benefits accruing to the nation is to misunderstand how the creation of new technology affects modern industrial capability. This document presents a profile of the significant ways in which technological developments in response to aerospace mission requirements have been coupled into industrial practice, with the result being that improved products and processes are now being utilized to benefit the nation.

  20. Updated United Nations Framework Classification for reserves and resources of extractive industries

    USGS Publications Warehouse

    Ahlbrandt, T.S.; Blaise, J.R.; Blystad, P.; Kelter, D.; Gabrielyants, G.; Heiberg, S.; Martinez, A.; Ross, J.G.; Slavov, S.; Subelj, A.; Young, E.D.

    2004-01-01

    The United Nations have studied how the oil and gas resource classification developed jointly by the SPE, the World Petroleum Congress (WPC) and the American Association of Petroleum Geologists (AAPG) could be harmonized with the United Nations Framework Classification (UNFC) for Solid Fuel and Mineral Resources (1). The United Nations has continued to build on this and other works, with support from many relevant international organizations, with the objective of updating the UNFC to apply to the extractive industries. The result is the United Nations Framework Classification for Energy and Mineral Resources (2) that this paper will present. Reserves and resources are categorized with respect to three sets of criteria: ??? Economic and commercial viability ??? Field project status and feasibility ??? The level of geologic knowledge The field project status criteria are readily recognized as the ones highlighted in the SPE/WPC/AAPG classification system of 2000. The geologic criteria absorb the rich traditions that form the primary basis for the Russian classification system, and the ones used to delimit, in part, proved reserves. Economic and commercial criteria facilitate the use of the classification in general, and reflect the commercial considerations used to delimit proved reserves in particular. The classification system will help to develop a common understanding of reserves and resources for all the extractive industries and will assist: ??? International and national resources management to secure supplies; ??? Industries' management of business processes to achieve efficiency in exploration and production; and ??? An appropriate basis for documenting the value of reserves and resources in financial statements.

  1. Development of industrial minerals in Colorado

    USGS Publications Warehouse

    Arbogast, Belinda F.; Knepper, Daniel H.; Langer, William H.; Cappa, James A.; Keller, John W.; Widmann, Beth L.; Ellefsen, Karl J.; Klein, Terry L.; Lucius, Jeffrey E.; Dersch, John S.

    2011-01-01

    Technology and engineering have helped make mining safer and cleaner for both humans and the environment. Inevitably, mineral development entails costs as well as benefits. Developing a mine is an environmental, engineering, and planning challenge that must conform to many Federal, State, and local regulations. Community collaboration, creative design, and best management practices of sustainability and biodiversity can be positive indicators for the mining industry. A better understanding of aesthetics, culture, economics, geology, climate, vegetation and wildlife, topography, historical significance, and regional land planning is important in resolving land-use issues and managing mineral resources wisely. Ultimately, the consuming public makes choices about product use (including water, food, highways, housing, and thousands of other items) that influence operations of the mineral industry. Land planners, resource managers, earth scientists, designers, and public groups have a responsibility to consider sound scientific information, society's needs, and community appeals in making smart decisions concerning resource use and how complex landscapes should change. An effort to provide comprehensive geosciences data for land management agencies in central Colorado was undertaken in 2003 by scientists of the U.S. Geological Survey and the Colorado Geological Survey. This effort, the Central Colorado Assessment Project, addressed a variety of land-use issues: an understanding of the availability of industrial and metallic rocks and minerals, the geochemical and environmental effects of historic mining activity on surface water and groundwater, and the geologic controls on the availability and quality of groundwater. The USDA Forest Service and other land management agencies have the opportunity to contribute to the sustainable management of natural aggregate and other mineral resources through the identification and selective development of mineral resources and the

  2. Vanguard industrial linear accelerator rapid product development

    NASA Astrophysics Data System (ADS)

    Harroun, Jim

    1994-07-01

    Siemens' ability to take the VanguardTM Industrial Linear Accelerator from the development stage to the market place in less than two years is described. Emphasis is on the development process, from the business plan through the shipment of the first commercial sale. Included are discussions on the evolution of the marketing specifications, with emphasis on imaging system requirements, as well as flexibility for expansion into other markets. Requirements used to create the engineering specifications, how they were incorporated into the design, and lessons learned from the demonstration system are covered. Some real-life examples of unanticipated problems are presented, as well as how they were resolved, including some discussion of the special problems encountered in developing a user interface and a training program for an international customer.

  3. Food industry and economic development in the Asia Pacific.

    PubMed

    McKay, John

    2007-01-01

    The food industry in the Asia Pacific region is gigantic in size, and is therefore a key element in the economic development prospects for the region. It is estimated that in 2000, for example, total expenditure on food and beverages in China was worth $US 188.5 billion, second only to that in Japan at $322 billion. Yet it is clear that given the expansion of both populations and incomes in the region this market will expand rapidly over the next few years. Particularly important will be the continued growth of cities and of the share of employment in industrial and service activities. Much of this growth in food purchases will be supplied from local sources, but this will demand some fundamental changes in domestic food production systems. There will also be a substantial growth in the food trade, with ever increasing levels of national and regional specialisation. These developments will put increasing pressures on quality standards at all levels, with a growing emphasis on food safety, integrity, quality, and nutritional and health impacts. This paper reviews the current status of the food industry and the food trade in the region, and presents some projections for future developments. Particular emphasis is given to policy choices that must be made to ensure that the food system in the region develops in ways that are sustainable and most beneficial to the population as a whole. PMID:17392081

  4. Food industry and economic development in the Asia Pacific.

    PubMed

    McKay, John

    2007-01-01

    The food industry in the Asia Pacific region is gigantic in size, and is therefore a key element in the economic development prospects for the region. It is estimated that in 2000, for example, total expenditure on food and beverages in China was worth $US 188.5 billion, second only to that in Japan at $322 billion. Yet it is clear that given the expansion of both populations and incomes in the region this market will expand rapidly over the next few years. Particularly important will be the continued growth of cities and of the share of employment in industrial and service activities. Much of this growth in food purchases will be supplied from local sources, but this will demand some fundamental changes in domestic food production systems. There will also be a substantial growth in the food trade, with ever increasing levels of national and regional specialisation. These developments will put increasing pressures on quality standards at all levels, with a growing emphasis on food safety, integrity, quality, and nutritional and health impacts. This paper reviews the current status of the food industry and the food trade in the region, and presents some projections for future developments. Particular emphasis is given to policy choices that must be made to ensure that the food system in the region develops in ways that are sustainable and most beneficial to the population as a whole.

  5. Idaho National Laboratory Research & Development Impacts

    SciTech Connect

    Stricker, Nicole

    2015-01-01

    Technological advances that drive economic growth require both public and private investment. The U.S. Department of Energy’s national laboratories play a crucial role by conducting the type of research, testing and evaluation that is beyond the scope of regulators, academia or industry. Examples of such work from the past year can be found in these pages. Idaho National Laboratory’s engineering and applied science expertise helps deploy new technologies for nuclear energy, national security and new energy resources. Unique infrastructure, nuclear material inventory and vast expertise converge at INL, the nation’s nuclear energy laboratory. Productive partnerships with academia, industry and government agencies deliver high-impact outcomes. This edition of INL’s Impacts magazine highlights national and regional leadership efforts, growing capabilities, notable collaborations, and technology innovations. Please take a few minutes to learn more about the critical resources and transformative research at one of the nation’s premier applied science laboratories.

  6. National Composite Center-A new roof for composite industries in Malaysia

    NASA Astrophysics Data System (ADS)

    Abdullah, Abu; Yuhazri, M. Y.; Sulaiman, Mohd Yusoff

    2016-03-01

    Today's Malaysia has more than 70 companies that are actively involved in composite activities. The activities are ranging from various business sectors, using different technology and material. Composites has been used in a wide range of applications in Malaysia and contributes to growth in a diverse range of industry value chains from utilities through to boat building, manufacturing and industrial applications, aerospace, consumer products and construction products. Thus, a key part of this strategy is the establishment of the National Composites Centre (NCC), which will bring together dynamic companies and enterprising academics to develop new technologies for the design and rapid manufacture of high-quality composite products.

  7. National Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry (Fact Sheet)

    SciTech Connect

    Not Available

    2012-01-01

    This technical highlight describes NREL research to develop a publicly available database of energy retrofit measures containing performance characteristics and cost estimates for nearly 3,000 measures. Researchers at the U.S. Department of Energy (DOE) National Renewable Energy Laboratory (NREL) have developed the National Residential Efficiency Measures Database, a public database that characterizes the performance and costs of common residential energy efficiency measures. The data are available for use in software programs that evaluate cost-effective retrofit measures to improve the energy efficiency of residential buildings. The database provides a single, consistent source of current data for DOE and private-sector energy audit and simulation software tools and the retrofit industry. The database will reduce risk for residential retrofit industry stakeholders by providing a central, publicly vetted source of up-to-date information.

  8. Nanotechnology - A path forward for developing nations

    NASA Astrophysics Data System (ADS)

    Shah, S. Ismat; Powers, Thomas M.

    2015-10-01

    One of the major issues with technology in general, and nanotechnology in particular, is that it could exacerbate the divide between developed and developing nations. If the benefits of the research do not flow beyond the national and geographical borders of the traditional major bastions of R&D, these benefits will not be equally and globally available. The consequence is that the technological divide becomes wider at the expense of mutual reliance. As much as developed nations need to rethink the strategy and the policy to bring nanotechnology products to market with the goal of global prosperity, developing nations cannot afford to simply wait for the lead from the developed nations. In the spirit of collaboration and collegiality, we describe issues with the current practices in nanotechnology R&D in the developing world and suggest a path for nanotechnology research in energy, water and the environment that developing nations could follow in order to become contributors rather than simply consumers.

  9. Industrialization and Economic Development in Advanced Placement Human Geography.

    ERIC Educational Resources Information Center

    Bailey, Adrian J.

    2000-01-01

    Focuses on the industrialization and economic development section of the Advanced Placement (AP) human geography course, addressing four specific aspects: (1) the character of industrialization; (2) spatial aspects of the rise of industrial economies; (3) contemporary global patterns of industrialization and resource extraction; and (4) impacts of…

  10. Development of Graduate Course Education by Industry Collaboration in Center for Engineering Education Development, CEED

    NASA Astrophysics Data System (ADS)

    Noguchi, Toru; Yoshikawa, Kozo; Nakamura, Masato; Kaneko, Katsuhiko

    New education programs for engineering graduate courses, and the achievements are described. Following the previous reports on overseas and domestic internship2) , 3) , this article states other common programs ; seminars on state of technologies in industries, practical English and internationalization programs, and a program to accept overseas internship students. E-learning system to assist off-campus students is also described. All these programs are developed and conducted by specialist professors invited from industries and national institutions, in collaboration with faculty professors. Students learn how the engineering science apply to the practical problems, acquire wider view and deeper understanding on industries, and gain abilities to act in global society including communication skill, those are not taught in classrooms and laboratories. Educational effects of these industry collaborated programs is significant to activate the graduate course education, although the comprehensive evaluation is the future subject.

  11. Environmental quality indexing of large industrial development alternatives using AHP

    SciTech Connect

    Solnes, Julius

    2003-05-01

    Two industrial development alternatives have been proposed for the East Coast of Iceland in order to strengthen its socio-economic basis. The favoured option is to build a large aluminium smelter, which requires massive hydropower development in the nearby highlands. Another viable option is the construction of a 6-million-ton oil refinery, following the planned exploitation of the Timan Pechora oil reserves in the Russian Arctic. A third 'fictitious' alternative could be general development of existing regional industry and new knowledge-based industries, development of ecotourism, establishment of national parks, accompanied by infrastructure improvement (roads, tunnels, communications, schools, etc.). The three alternatives will have different environmental consequences. The controversial hydropower plant for the smelter requires a large water reservoir as well as considerable land disturbance in this unique mountain territory, considered to be the largest uninhabited wilderness in Western Europe. The aluminium smelter and the oil refinery will give rise to substantial increase of the greenhouse gas (GHG) emissions of the country (about 20%). Then there is potential environmental risk associated with the refinery regarding oil spills at sea, which could have disastrous impact on the fisheries industry. However, the oil refinery does not require any hydropower development, which is a positive factor. Finally, the third alternative could be defined as a ''green'' solution whereby the detrimental environmental consequences of the two industrial solutions are mostly avoided. In order to compare the three alternatives in an orderly manner, the analytic hierarchy process methodology of Saaty was applied to calculate the environmental quality index of each alternative, which is defined as a weighted sum of selected environmental and socio-economic factors. These factors are evaluated on a comparison basis, applying the AHP methodology, and the weights in the quality

  12. Establishing Ergonomics in Industrially Developing Countries

    SciTech Connect

    Stewart, K; Silverstein, B; Kiefer, M

    2005-08-29

    The introduction of ergonomics is an ongoing effort in industrially developing countries and will ultimately require an organized, programmatic approach spanning several countries and organizations. Our preliminary efforts with our partner countries of Viet Nam, Thailand, and Nicaragua have demonstrated that a one-time course is just the first step in a series of necessary events to provide skills and create an infrastructure that will have lasting impact for the host country. To facilitate that any sort of training has a lasting impact, it is recommended that host countries establish a 'contract' with class participants and the guest instructors for at least one follow-up visit so instructors can see the progress and support the participants in current and future efforts. With repeated exchanges, the class participants can become the 'in country experts' and the next generation of ergonomic trainers. Additionally, providing participants with an easy to use hazard assessment tool and methods for evaluating the financial impact of the project (cost/benefit analysis) will assist increase the likelihood of success and establish a foundation for future projects. In the future, developing trade and regionally/culturally specific 'ergonomics toolkits' can help promote broader implementation, especially where training resources may be limited.

  13. Solid waste management for climate change policy in industrial countries, newly industrialized countries, and developing countries

    SciTech Connect

    Horng, J.J.

    1996-12-31

    Although the First FCCC COP did not reach agreement on controlling greenhouse gases, the intention of international society on limiting climate change problems is obvious. Among the important greenhouse gases of CO{sub 2}, CH{sub 4}, and N{sub 2}O, the control of CO{sub 2} emission is more important for industrial countries than for the others due to their large emission. The CO{sub 2} reduction for export-oriented NICs (Newly Industrialized Countries) is a growth-limited or -killing policy that will severely hurt the national economics and will be carefully evaluated before taking any action. On the other hand, the reduction of methane emission by proper managing solid wastes, especially landfills, stands for good short- and long-term investments for NICs and developing countries. A 50 to 90% CH{sub 4} recovery from landfill is feasible and profitable, but the methane recovery technology or capital cost needs to come from industrial countries. Taking the example in Taiwan, more than 60% of methane emission is from landfills. A medium 50% reduction can contribute to more than 5% reduction of CO{sub 2} equivalent basis on global warming potentials (GWPs). However, the landfill gas recovery program is still under demonstration without actual applications.

  14. Regional Industry Workforce Development: The Gulf Coast Petrochemical Information Network

    ERIC Educational Resources Information Center

    Hodgin, Johnette; Muha, Susan

    2008-01-01

    The Gulf Coast Petrochemical Information Network (GC-PIN) is a workforce development partnership among industry businesses and area institutions of higher education in the four-county Gulf Coast region. GC-PIN partners develop new industry-specific curricula, foster industry career awareness, and retrain existing employees in new technologies.

  15. The Important Role of Physics in Industry and Economic Development

    NASA Astrophysics Data System (ADS)

    Alvarado, Igor

    2012-10-01

    Good Physics requires good education. Good education translates into good Physics professionals. The process starts early with Science, Technology, Engineering and Mathematics (STEM) education programs for Middle and High-School students. Then it continues with competitive higher education programs (2 years and 4 years) at colleges and universities designed to satisfy the needs of industry and academia. The research work conducted by graduate students in Physics (and Engineering Physics) frequently translates into new discoveries and innovations that have direct impact in society (e.g. Proton Cancer Therapy). Some of the major and largest scientific experiments in the world today are physics-centered (e.g. Large Hadron Collider-LHC) that generate employment and business opportunities for thousands of scientists, academic research groups and companies from around the world. New superconducting magnets and advanced materials that have resulted from previous research in physics are commonly used in these extreme experiments. But not all physicists will end up working at these large high-energy physics experiments, universities or National Laboratories (e.g. Fermilab); industry requires new generations of (industrial) physicists in such sectors as semiconductor, energy, space, life sciences, defense and advanced manufacturing. This work presents an industry perspective about the role of Physics in economic development and the need for a collaborative Academic-Industry approach for a more effective translational research. A series of examples will be presented with emphasis in the measurement, control, diagnostics and computing capabilities needed to translate the science (physics) into innovations and practical solutions that can benefit society as a whole.

  16. The United Nations University and Information Development.

    ERIC Educational Resources Information Center

    Tanaskovic, Ines Wesley

    1994-01-01

    Describes the role of the United Nations University (UNU) in promoting the effective use of new information technologies in support of science and technology for development. The UNU Information and Decision Systems (INDES) project examines the constraints preventing developing nations from using advances in informatics and from integrating their…

  17. Education for National Development: World Bank Activities.

    ERIC Educational Resources Information Center

    Habte, Aklilu; Heyneman, Stephen

    1983-01-01

    The goals of education in developing nations are changing from interest in simply acquiring knowledge and fostering economic development to a greater understanding of the complexity of the relationship between schooling and larger national goals. The World Bank's role in these educational changes is covered. (IS)

  18. Industrial sustainability in China: practice and prospects for eco-industrial development.

    PubMed

    Fang, Yiping; Côté, Raymond P; Qin, Rong

    2007-05-01

    China is a large densely populated country undergoing rapid industrialization and is becoming one of the world's biggest consumers of natural resources. This circumstance provides a sharp contrast with other countries. As China is so significant in the global economy, studies of its eco-industrial development are very important. In this study we examined the state of eco-industrial development in China and have drawn conclusions from this analysis about some of the future prospects for sustainable development. In the analysis, we investigated the application of industrial ecology concepts by reference to several case studies. We have therefore described the current environmental situation in China, and have provided an overview of eco-industrial development and its implementation. Constraints to industrial sustainability in China have also been examined. We consider that eco-industrial development in China is in its infancy, and that closed loops involving chains and industrial symbiotic webs are the technological key and core of successful initiatives in the application of industrial ecology. In the case studies, we found that each system has different characteristics and management concerns. Our major conclusion is that even though China's Agenda 21 highlights the principles and sets the directions for eco-industrial development, these have not yet become essential ingredients in the country's industrial policy and practice for implementing Agenda 21.

  19. Geothermal materials development at Brookhaven National Laboratory

    SciTech Connect

    Kukacka, L.E.

    1997-12-31

    As part of the DOE/OGT response to recommendations and priorities established by industrial review of their overall R&D program, the Geothermal Materials Program at Brookhaven National Laboratory (BNL) is focusing on topics that can reduce O&M costs and increase competitiveness in foreign and domestic markets. Corrosion and scale control, well completion materials, and lost circulation control have high priorities. The first two topics are included in FY 1997 BNL activities, but work on lost circulation materials is constrained by budgetary limitations. The R&D, most of which is performed as cost-shared efforts with U.S. geothermal firms, is rapidly moving into field testing phases. FY 1996 and 1997 accomplishments in the development of lightweight CO{sub 2}-resistant cements for well completions; corrosion resistant, thermally conductive polymer matrix composites for heat exchange applications; and metallic, polymer and ceramic-based corrosion protective coatings are given in this paper. In addition, plans for work that commenced in March 1997 on thermally conductive cementitious grouting materials for use with geothermal heat pumps (GHP), are discussed.

  20. Geothermal materials development at Brookhaven National Laboratory

    SciTech Connect

    Kukacka, L.E.

    1997-06-01

    As part of the DOE/OGT response to recommendations and priorities established by industrial review of their overall R and D program, the Geothermal Materials Program at Brookhaven National Laboratory (BNL) is focusing on topics that can reduce O and M costs and increase competitiveness in foreign and domestic markets. Corrosion and scale control, well completion materials, and lost circulation control have high priorities. The first two topics are included in FY 1997 BNL activities, but work on lost circulation materials is constrained by budgetary limitations. The R and D, most of which is performed as cost-shared efforts with US geothermal firms, is rapidly moving into field testing phases. FY 1996 and 1997 accomplishments in the development of lightweight CO{sub 2}-resistant cements for well completions; corrosion resistant, thermally conductive polymer matrix composites for heat exchange applications; and metallic, polymer and ceramic-based corrosion protective coatings are given in this paper. In addition, plans for work that commenced in March 1997 on thermally conductive cementitious grouting materials for use with geothermal heat pumps (GHP), are discussed.

  1. Potential Market for Satellite Technology in Meeting Telecommunication Needs of Developing Nations

    NASA Technical Reports Server (NTRS)

    1996-01-01

    A recent study examined the potential for satellite technology to meet the telecommunication needs of developing nations. The growth of these nations depends on their attracting and holding the industrial investments of developed nations. This will not be likely with the antiquated telecommunications infrastructure typical of developing nations. On the contrary, it will require an infrastructure that is compatible with international standards. Most of the developing nations perceive this necessity and are pursuing the necessary upgrades. The rate of replacement, types of technology, services affected, and the terrestrial/satellite mix differ by each nation's priorities and gross national product (GNP).

  2. The Development Of Industrial Excimer Lasers

    NASA Astrophysics Data System (ADS)

    Levatter, Jeffrey I.

    1986-11-01

    The first discharge pumped excimer lasers introduced in the 1970's were derivatives of N2 and C02 TEA lasers. They had spatially non-uniform outputs, relatively small output energies, low average powers, short operating lifetimes, and poor reliability. Today, more than a decade later, excimer lasers are just now maturing to the point where they are starting to enter the industrial workplace. This paper will review the transition from CO2/N2 to excimer technology, the engineering hurdles excimer lasers must overcome to make them viable industrial tools, and the current state of the "industrial excimer laser".

  3. Research and Development. The Illinois Plan for Industrial Education.

    ERIC Educational Resources Information Center

    Illinois State Univ., Normal.

    This guide, which is one in the "Exploration" series of curriculum guides intended to assist junior high and middle school industrial educators in helping their students explore diverse industrial situations and technologies used in industry, deals with research and development. The following topics are covered in the individual lessons: product…

  4. National Strategies for Curriculum Development.

    ERIC Educational Resources Information Center

    United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and Oceania.

    Officials responsible for designing and introducing curriculum innovation in countries participating in the Asian Programme of Education Innovation for Development (APEID) met in Australia in September 1979 to exchange experiences and explore problems and issues of common interest. Conference participants, representing educational ministries or…

  5. 78 FR 9431 - National Industrial Security Program Policy Advisory Committee (NISPPAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-08

    ... From the Federal Register Online via the Government Publishing Office NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Information Security Oversight Office National Industrial Security Program Policy... Industrial Security Program policy matters. DATES: The meeting will be held on March 20, 2013 from 10:00...

  6. 77 FR 63893 - National Industrial Security Program Policy Advisory Committee (NISPPAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-17

    ... From the Federal Register Online via the Government Publishing Office ] NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Information Security Oversight Office National Industrial Security Program Policy... Industrial Security Program policy matters. DATES: The meeting will be held on November 14, 2012 from 10:00...

  7. 15 CFR 291.4 - National industry-specific pollution prevention and environmental compliance resource centers.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false National industry-specific pollution... § 291.4 National industry-specific pollution prevention and environmental compliance resource centers... information on pollution prevention opportunities, regulatory compliance and technologies and techniques...

  8. 15 CFR 291.4 - National industry-specific pollution prevention and environmental compliance resource centers.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false National industry-specific pollution... § 291.4 National industry-specific pollution prevention and environmental compliance resource centers... information on pollution prevention opportunities, regulatory compliance and technologies and techniques...

  9. 15 CFR 291.4 - National industry-specific pollution prevention and environmental compliance resource centers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false National industry-specific pollution... § 291.4 National industry-specific pollution prevention and environmental compliance resource centers... information on pollution prevention opportunities, regulatory compliance and technologies and techniques...

  10. 75 FR 10507 - Information Security Oversight Office; National Industrial Security Program Policy Advisory...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-08

    ... RECORDS ADMINISTRATION Information Security Oversight Office; National Industrial Security Program Policy... Policy Advisory Committee. The meeting will be held to discuss National Industrial Security Program policy matters. DATES: The meeting will be held on March 24, 2010 from 10 a.m. to 12 p.m....

  11. DEFI Photonique: a French national training project for optics and photonics industry

    NASA Astrophysics Data System (ADS)

    Boéri, E.; Cormier, E.

    2014-07-01

    The French government supports a structuring project for French Photonics. This project name DEFI Photonique is carried by the CNOP (National Committee for Optics and Photonics) for a period of 5 years (2013-2017). One of the most important tasks is dedicated to training for industry, particularly SMEs. The project aims at elaborating a training offer based on the experience of PYLA, the Bordeaux training facility for Optics and Photonics, and create a national network throughout all the French Photonics clusters. The project plans to initiate, develop and coordinate training courses based on the players skills in the sector, in particular regional clusters, depending on their field of excellence. This deployment of training courses should enable a mesh structure both thematically and geographically. Collaborative work between training players in each pole, including joint actions, will facilitate access to training courses for companies, especially SMEs. A market survey is already being conducted in 2013 in photonics industry and application sectors. Implementation of actions involves all French photonics clusters as well as professional organizations. We will rely on the feedback we have with PYLA to show how training courses can be a strategic tool for development of technologies and industries. At this stage of the DEFI Photonique project we will be able to present the results of different analyses that have been conducted in key sectors and plans that will be implemented for the realization of the first actions.

  12. Wind Energy Workforce Development: A Roadmap to a Sustainable Wind Industry (Poster)

    SciTech Connect

    Baring-Gould, I.; Kelly, M.

    2010-05-01

    As the United States moves toward a vision of greatly expanded wind energy use as outlined in the U.S. Department of Energy's 20% Wind Energy by 2030 report, the need for skilled workers at all levels in the industry is repeatedly identified as a critical issue. This presentation is an overview of the educational infrastructure and expected industry needs to support the continued development of a vibrant U.S. wind industry through a discussion of the activities identified that must be put in place to train workers. The paper will also provide a framework to address issues raised from each of the education and industry sectors, identifying a roadmap for developing an educational infrastructure to support wind technology. The presentation will also provide an understanding of the available resources, materials, and programs available across the industry. This presentation provides an overview of the educational infrastructure and expected industry needs to support the continued development of a vibrant U.S. wind industry as part of a collaborative effort to develop a wind workforce roadmap. This presentation will provide 1) A review of needed programs to train workers for the wind industry; 2) An overview of the importance education will play if the nation is to expand wind energy (both in development and deployment terms) and a review of ongoing activities with a focus on federal efforts; 3) A review of the materials and resources available across the industry and a framework to address issues raised from each of the education and industry sectors.

  13. The Prevalence of Short Sleep Duration by Industry and Occupation in the National Health Interview Survey

    PubMed Central

    Luckhaupt, Sara E.; Tak, SangWoo; Calvert, Geoffrey M.

    2010-01-01

    Study Objectives: To explore whether employment in industries likely to have non-standard work schedules (e.g., manufacturing and service) and occupations with long work-weeks (e.g., managerial/ professional, sales, and transportation) is associated with an increased risk of short sleep duration. Design: Cross-sectional epidemiologic survey. Setting: Household-based face-to-face survey of civilian, non-institutionalized US residents. Participants: Sample adults interviewed for the National Health Interview Survey in 1985 or 1990 (N = 74,734) or between 2004 and 2007 (N = 110,422). Most analyses focused on civilian employed workers interviewed between 2004 and 2007 (N = 66,099). Interventions: N/A Measurements and Results: The weighted prevalence of self-reported short sleep duration, defined as ≤6 h per day, among civilian employed workers from 2004-2007 was 29.9%. Among industry categories, the prevalence of short sleep duration was greatest for management of companies and enterprises (40.5%), followed by transportation/warehousing (37.1%) and manufacturing (34.8%). Occupational categories with the highest prevalence included production occupations in the transportation/warehousing industry, and installation, maintenance, and repair occupations in both the transportation/warehousing industry and the manufacturing industry. In the combined sample from 1985 and 1990, 24.2% of workers reported short sleep duration; the prevalence of short sleep duration was significantly lower during this earlier time period compared to 2004–2007 for 7 of 8 industrial sectors. Conclusions: Self-reported short sleep duration among US workers varies by industry and occupation, and has increased over the past two decades. These findings suggest the need for further exploration of the relationship between work and sleep, and development of targeted interventions for specific industry/occupation groups. Citation: Luckhaupt SE; Tak S; Calvert GM. The prevalence of short sleep duration

  14. Developing a National Geography Curriculum for Australia

    ERIC Educational Resources Information Center

    Maude, Alaric Mervyn

    2014-01-01

    Australia is in the process of implementing a national geography curriculum to replace the separate state and territory curriculums. The paper describes the process of curriculum development, and identifies the different groups that were involved. These included the board and staff of the national curriculum authority, geography teachers across…

  15. Environmental management for dredging sediments - the requirement of developing nations.

    PubMed

    Manap, Norpadzlihatun; Voulvoulis, Nikolaos

    2015-01-01

    Scientific research has characterized the effects of dredging, an underwater excavation process for navigational purposes or material extraction, and has shown its association with a number of chemical, physical and biological impacts. Due to this, much environmental management has been applied in the dredging industry in order to manage its detrimental effects. However, developing nations may have different approaches towards their dredging environmental management to compare to their companions with higher economic strength. Moreover, scientific evidence to make an informed decision is often lacking, hence affecting the number of research executed at these nations, limiting their efforts to preserve the environment. This paper reviews the dredging environmental impacts and its two important factors, dredging technology and sediment characteristic, that determine the magnitude of impacts through literature review, and discusses the need for a more integrated dredging environmental management to be developed for developing nations. PMID:25304520

  16. Environmental management for dredging sediments - the requirement of developing nations.

    PubMed

    Manap, Norpadzlihatun; Voulvoulis, Nikolaos

    2015-01-01

    Scientific research has characterized the effects of dredging, an underwater excavation process for navigational purposes or material extraction, and has shown its association with a number of chemical, physical and biological impacts. Due to this, much environmental management has been applied in the dredging industry in order to manage its detrimental effects. However, developing nations may have different approaches towards their dredging environmental management to compare to their companions with higher economic strength. Moreover, scientific evidence to make an informed decision is often lacking, hence affecting the number of research executed at these nations, limiting their efforts to preserve the environment. This paper reviews the dredging environmental impacts and its two important factors, dredging technology and sediment characteristic, that determine the magnitude of impacts through literature review, and discusses the need for a more integrated dredging environmental management to be developed for developing nations.

  17. Plastic cars for developing nations

    SciTech Connect

    Ashley, S.

    1997-11-01

    Plastic automobiles may have passed a milestone on the long road to commercial reality with the development of Composite Concept Vehicle (CCV) from Chrysler Corp. in Auburn Hills, Mich. This basic compact car--so basic it could be called bare bones--is built by attaching an injection-molded thermoplastic polyester body onto a tubular steel chassis. The 1,200-pound CCV, which is expected to require one-third the labor and investment needed to build a conventional small car, was designed for new buyers in the emerging economies of China, India, and Southeast Asia. If commercialized, the car would likely cost about $6,000--halfway between a motorcycle and an entry-level auto. The small car was unveiled in September 1996 at the Frankfurt Auto Show in Germany.

  18. Study rates U.S. hospitals vs. other nations, industries.

    PubMed

    Burda, D

    1991-10-01

    American hospitals generally are further along with their total quality management programs than their Canadian counterparts but lag behind companies in other U.S. industries, according to a comprehensive international study that examined four industries--healthcare, automotive, banking and computer--in four countries--the United States, Canada, Germany and Japan. PMID:10114178

  19. Development of an Industrial Engineering Project

    ERIC Educational Resources Information Center

    Moreno, Lorenzo; Gonzalez, Evelio; Acosta, Leopoldo; Toledo, Jonay; Marichal, Nicolas; Hamilton, Alberto; Sigut, Marta; Mendez, J. Albino; Hernandez, Sergio; Torres, Santiago

    2005-01-01

    This paper presents a teaching strategy of the scheduling and developmental phase of an Industrial Engineering computer project. It is based on a real project which has been carried out by our department in collaboration with a local company. The classroom setting provides an environment where students can experience firsthand all phases of the…

  20. The United Nations Conference on Science and Technology for Development.

    PubMed

    Kaplan, M M

    1979-12-01

    Despite a long gestation period in preparation for the United Nations Conference on Science and Technology for Development (UNCSTD) and overall expenditures estimated at some $50 million for this Vienna held conference, there were no dramatic results. The Conference faced trying to reach some compromise agreement on the following main points: 1) a global information system, and governing principles for the transfer of technology; 2) institutional arrangements, particularly within the United Nations system, which would ensure a high status for an Intergovernmental Committee on Science and Technology for development; and 3) automatically renewable financing to be supplied primarily by the industrialized countries to implement the Plan of Action. Arguments concerning these points occupied 2 committees for 10 working days of the conference. The outcome of negotiations on these identified points included the following: 1) minimal progress in facilitating access to industrial information, and to patent rights and transfer of technology in general; 2) the proposed Intergovernmental Committee on Science and Technology for Development will be open to all interested countries and will report to the United Nations General Assembly through ECOSOC; 3) coordination of the post-conference program of the Plan of Action will be centered in the office of Director-General for Development and International Economic Cooperation at the United Nations; 4) $250 million was named as the target for the first 2 years of operation; and 5) groups of experts will be convened on an ad hoc basis to advise on various matters.

  1. 78 FR 17640 - National Climate Assessment and Development Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-22

    ... National Oceanic and Atmospheric Administration National Climate Assessment and Development Advisory... the National Climate Assessment and Development Advisory Committee (NCADAC) for a six-month period.... Decker, Designated Federal Officer, National Climate Assessment and Development Advisory Committee,...

  2. The Scientific Impact of Developing Nations.

    PubMed

    Gonzalez-Brambila, Claudia N; Reyes-Gonzalez, Leonardo; Veloso, Francisco; Perez-Angón, Miguel Angel

    2016-01-01

    This paper analyzes science productivity for nine developing countries. Results show that these nations are reducing their science gap, with R&D investments and scientific impact growing at more than double the rate of the developed world. But this "catching up" hides a very uneven picture among these nations, especially on what they are able to generate in terms of impact and output relative to their levels of investment and available resources. Moreover, unlike what one might expect, it is clear that the size of the nations and the relative scale of their R&D investments are not the key drivers of efficiency. PMID:27023182

  3. The Scientific Impact of Developing Nations

    PubMed Central

    Gonzalez-Brambila, Claudia N.; Reyes-Gonzalez, Leonardo; Veloso, Francisco; Perez-Angón, Miguel Angel

    2016-01-01

    This paper analyzes science productivity for nine developing countries. Results show that these nations are reducing their science gap, with R&D investments and scientific impact growing at more than double the rate of the developed world. But this “catching up” hides a very uneven picture among these nations, especially on what they are able to generate in terms of impact and output relative to their levels of investment and available resources. Moreover, unlike what one might expect, it is clear that the size of the nations and the relative scale of their R&D investments are not the key drivers of efficiency. PMID:27023182

  4. The Scientific Impact of Developing Nations.

    PubMed

    Gonzalez-Brambila, Claudia N; Reyes-Gonzalez, Leonardo; Veloso, Francisco; Perez-Angón, Miguel Angel

    2016-01-01

    This paper analyzes science productivity for nine developing countries. Results show that these nations are reducing their science gap, with R&D investments and scientific impact growing at more than double the rate of the developed world. But this "catching up" hides a very uneven picture among these nations, especially on what they are able to generate in terms of impact and output relative to their levels of investment and available resources. Moreover, unlike what one might expect, it is clear that the size of the nations and the relative scale of their R&D investments are not the key drivers of efficiency.

  5. Developing national health information in Australia.

    PubMed

    Moss, E A

    1995-01-01

    Two significant developments in the past two years have given impetus to development of health information in Australia. In March 1993, the former National Minimum Data Set was revised and published as the National Health Data Dictionary. Second, establishment of an agreement in June 1993, between the Commonwealth and State/Territory government health authorities, the Australian Bureau of Statistics, and the Australian Institute of Health and Welfare initiated a process of working cooperatively to develop national health information. Australia, like many other countries, suffers from inconsistent health data definitions, lack of timely data, poor data quality, gaps in data coverage, and barriers to accessing the data. The National Health Information Agreement [1] came into effect on June 1, 1993 and seeks to provide a national framework and processes to improve national health information, that is, information on health of the population; determinants of the population's health; provision and utilization of health promotion and disease prevention programs and health services including: outcomes and outputs, resource use and costs, access by and distribution to population groups; relationships between these elements; and the language necessary to facilitate provision of services and collection of national health information. The major implementation mechanism of the Agreement is a rolling three-year National Health Information Work Program of national health information activities. The activities range from development work on standard hospital charts of accounts, on health outcome measures, and on new collections such as outpatients to improved definitions and the enhancement of existing collections such as mental health and vital statistics. The Work Program is published annually. A first priority is to improve the data collections available. This is being achieved through the setting of national data definitions and standards. The Agreement recognizes the

  6. National Rocket Propulsion Materials Plan: A NASA, Department of Defense, and Industry Partnership

    NASA Technical Reports Server (NTRS)

    Clinton, Raymond G., Jr.; Munafo, Paul M. (Technical Monitor)

    2001-01-01

    NASA, Department of Defense, and rocket propulsion industry representatives are working together to create a national rocket propulsion materials development roadmap. This "living document" will facilitate collaboration among the partners, leveraging of resources, and will be a highly effective tool for technology development planning. The structuring of the roadmap, and development plan, which will combine the significant efforts of the Integrated High Payoff Rocket Propulsion Technology (IHPRPT) Program, and NASA's Integrated Space Transportation Plan (ISTP), is being lead by the IHPRPT Materials Working Group (IMWG). The IHPRPT Program is a joint DoD, NASA, and industry effort to dramatically improve the nation's rocket propulsion capabilities. This phased program is structured with increasingly challenging goals focused on performance, reliability, and cost to effectively double rocket propulsion capabilities by 2010. The IHPRPT program is focused on three propulsion application areas: Boost and Orbit Transfer (both liquid rocket engines and solid rocket motors), Tactical, and Spacecraft. Critical to the success of this initiative is the development and application of advanced materials, processes, and manufacturing technologies. NASA's ISTP is a comprehensive strategy focusing on the aggressive safety, reliability, and affordability goals for future space transportation systems established by the agency. Key elements of this plan are the 2 nd and 3 d Generation Reusable Launch Vehicles (RLV). The affordability and safety goals of these generational systems are, respectively, 10X cheaper and 100X safer by 2010, and 100X cheaper and 10,000X safer by 2025. Accomplishment of these goals requires dramatic and sustained breakthroughs, particularly in the development and the application of advanced material systems. The presentation will provide an overview of the IHPRPT materials initiatives, NASA's 2nd and 3 rd Generation RLV propulsion materials projects, and the

  7. Research and Development in Industry: 1999. Detailed Statistical Tables.

    ERIC Educational Resources Information Center

    Wolfe, Raymond M.

    This report presents results from the 1999 Survey of Industrial Research and Development. It contains a full set of statistics produced from the survey, trends in industrial research and development (R&D) since 1953, and statistics on employment since 1989. Contents include: (1) "Note to Users of Historical Statistics"; (2) "Detailed Statistical…

  8. Developing an energy efficiency service industry in Shanghai

    SciTech Connect

    Lin, Jiang; Goldman, Charles; Levine, Mark; Hopper, Nicole

    2004-02-10

    The rapid development of the Chinese economy over the past two decades has led to significant growth in China's energy consumption and greenhouse gas (GHG) emissions. Between 1980 and 2000, China's energy consumption more than doubled from 602 million to 1.3 billion tons of coal-equivalent (NBS, 2003). In 2000, China's GHG emissions were about 12% of the global total, ranked second behind only the US. According to the latest national development plan issued by the Chinese government, China's energy demand is likely to double again by 2020 (DRC, 2004), based on a quadrupling of its gross domestic product (GDP). The objectives of the national development plan imply that China needs to significantly raise the energy efficiency of its economy, i.e., cutting the energy intensity of its economy by half. Such goals are extremely ambitious, but not infeasible. China has achieved such reductions in the past, and its current overall level of energy efficiency remains far behind those observed in other developed economies. However, challenges remain whether China can put together an appropriate policy framework and the institutions needed to improve the energy efficiency of its economy under a more market-based economy today. Shanghai, located at the heart of the Yangtze River Delta, is the most dynamic economic and financial center in the booming Chinese economy. With 1% of Chinese population (13 million inhabitants), its GDP in 2000 stood at 455 billion RMB yuan (5% of the national total), with an annual growth rate of 12%--much higher than the national average. It is a major destination for foreign as well as Chinese domestic investment. In 2003, Shanghai absorbed 10% of actual foreign investment in all China (''Economist'', January 17-23, 2004). Construction in Shanghai continues at a breakneck pace, with an annual addition of approximately 200 million square foot of residential property and 100 million square foot of commercial and industrial space over the last 5 years

  9. Partnering industry to develop clinical information systems.

    PubMed

    Hughes, Victoria; Hamer, Susan

    2012-09-01

    Over the past six months, the nursing team from the Department of Health's Informatics Directorate has been working with colleagues in industry to promote and share learning and understanding of issues surrounding the nursing profession. Team members were asked among other things to identify key questions senior nursing colleagues and suppliers should ask one another when considering the implementation of a new system for recording clinical information and extracting pertinent data. This article aims to encourage collaborative working and understanding of the importance of senior nurse involvement in choosing and delivering the right system for staff and patients. PMID:23008903

  10. NATIONAL INSTITUTIONS AND SUBNATIONAL DEVELOPMENT IN AFRICA*

    PubMed Central

    Michalopoulos, Stelios; Papaioannou, Elias

    2014-01-01

    We investigate the role of national institutions on subnational African development in a novel framework that accounts for both local geography and cultural-genetic traits. We exploit the fact that the political boundaries on the eve of African independence partitioned more than 200 ethnic groups across adjacent countries subjecting similar cultures, residing in homogeneous geographic areas, to different formal institutions. Using both a matching type and a spatial regression discontinuity approach we show that differences in countrywide institutional structures across the national border do not explain within-ethnicity differences in economic performance, as captured by satellite images of light density. The average noneffect of national institutions on ethnic development masks considerable heterogeneity partially driven by the diminishing role of national institutions in areas further from the capital cities. PMID:25802926

  11. National planning for sustainable development: Dominican Republic case study

    SciTech Connect

    Sanders, R.A.

    1997-08-01

    This paper describes ongoing discussions between faculty of the SUNY College of Environmental Science and Forestry at Syracuse, New York and faculty and staff at the Autonomous University of Santo Domingo in the Dominican Republic. The goal of these discussions is to design first steps of a Dominican national approach to sustainable development. Despite the rich literature on sustainable development in theory and practice, designing a national sustainable development strategy remains a difficult process. Discussions have led to a conclusion that an information-based strategy is a useful initial priority. The goals are to establish a sustainable development information base and identify key channels of communication between government, industry, and citizens to assure sound future development. However helpful this initial design may be, the lack of credible national models of sustainable development threatens the success of efforts such as are emerging in the Dominican Republic. At this time, the author cannot link early initiatives to eventual goals. To address this need, the paper offers a preliminary model of benchmarked sustainable development as guidance for long-term national strategies.

  12. Rural Women's Vocational Training for National Development.

    ERIC Educational Resources Information Center

    Chu, Lily

    Although women are a crucial element in national rural development, their role continues to be neglected in plans and programs for change--especially in Third World countries. In addition to the burden faced by rural people generally in developing countries, women carry a double burden because of their low social status, high illiteracy rate, lack…

  13. Development of an Industry Training Strategy for the Abattoir Industry in New South Wales.

    ERIC Educational Resources Information Center

    Clements, Andrew; Speers, Geoff

    The abattoir (meat processing) industry is facing a number of challenges in Australia, including introduction of technology, safety standards, restructuring, and development and implementation of an effective training culture. The training strategy will effectively target existing training resources for the industry and upskill employees in a…

  14. Developing and Managing University-Industry Research Collaborations through a Process Methodology/Industrial Sector Approach

    ERIC Educational Resources Information Center

    Philbin, Simon P.

    2010-01-01

    A management framework has been successfully utilized at Imperial College London in the United Kingdom to improve the process for developing and managing university-industry research collaborations. The framework has been part of a systematic approach to increase the level of research contracts from industrial sources, to strengthen the…

  15. The Extractive Minerals Industry in the National Science Curriculum.

    ERIC Educational Resources Information Center

    Barrett, Eileen

    1990-01-01

    Described is an activity in which students learn about the minerals industry in the United Kingdom as well as the properties of rocks. Emphasized is the impact of human activity on the Earth. The variety of mineral resources in the United Kingdom and the environmental issues are discussed. (KR)

  16. National Environmental/Energy Workforce Assessment: Business and Industry.

    ERIC Educational Resources Information Center

    National Field Research Center Inc., Iowa City, IA.

    This report presents an indication of existing workforce levels and career potentials for environmental/energy occupations within private industry. The study concerns itself with the environmental pollution control areas of air, noise, potable water, pesticides, radiation, solid waste, wastewater, and energy. The format includes an introduction to…

  17. Industrial ecology at Lawrence Livermore National Laboratory summary statement

    SciTech Connect

    Gilmartin, T.J.

    1996-06-04

    At Livermore our hope and our intention is to make important contributions to global sustainability by basing both our scientific and technological research and our business practices on the principles of industrial ecology. Current efforts in the following fields are documented: global security, global ecology, energy for transportation, fusion energy, materials sciences, environmental technology, and bioscience.

  18. Microsystem technology development at Sandia National Laboratories

    SciTech Connect

    Smith, J.H.

    1995-11-01

    An overview of the major sensor and actuator projects using the micromachining capabilities of the Microelectronics Development Laboratory at Sandia National Laboratories is presented. Development efforts are underway for a variety of surface micromachined sensors and actuators. A technology that embeds micromechanical devices below the surface of the wafer prior to microelectronics fabrication has also been developed for integrating microelectronics with surface micromachined micromechanical devices.

  19. Hydrothermal industrialization: direct heat development. Final report

    SciTech Connect

    Not Available

    1982-05-01

    A description of hydrothermal resources suitable for direct applications, their associated temperatures, geographic distribution and developable capacity are given. An overview of the hydrothermal direct-heat development infrastructure is presented. Development activity is highlighted by examining known and planned geothermal direct-use applications. Underlying assumptions and results for three studies conducted to determine direct-use market penetration of geothermal energy are discussed.

  20. National energy planning for developing countries

    SciTech Connect

    Wilbanks, T.J.

    1986-01-01

    This paper is a summary of what has been learned from the experience with national energy planning in developing countries. It considers lessons learned about the roles of data, analysis, and modeling in this enterprise, because of the connections between these components and our common interest in research to advance the state of the art; but it concludes that the most important needs at this time are institutional rather than analytical, which suggests a somewhat different set of priorities for scholarship related to national energy planning in the developing world.

  1. National Nuclear Forensics Expertise Development Program

    NASA Astrophysics Data System (ADS)

    Kentis, Samantha E.; Ulicny, William D.

    2009-08-01

    Over the course of the 2009 Federal Fiscal Year the United States (U.S.) Department of Homeland Security (DHS), in partnership with the Departments of Defense (DoD) and Energy (DOE), is continuing existing programs and introducing new programs designed to maintain a highly qualified, enduring workforce capable of performing the technical nuclear forensics mission. These student and university programs are designed to recruit the best and brightest students, develop university faculty and research capabilities, and engage the national laboratories in fields of study with application in nuclear forensics. This comprehensive effort constitutes the National Nuclear Forensics Expertise Development Program.

  2. 7 CFR 1980.488 - Guaranteed industrial development bond issues.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 14 2013-01-01 2013-01-01 false Guaranteed industrial development bond issues. 1980.488 Section 1980.488 Agriculture Regulations of the Department of Agriculture (Continued) RURAL..., DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL Business and Industrial...

  3. 7 CFR 1980.488 - Guaranteed industrial development bond issues.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 14 2014-01-01 2014-01-01 false Guaranteed industrial development bond issues. 1980.488 Section 1980.488 Agriculture Regulations of the Department of Agriculture (Continued) RURAL..., DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL Business and Industrial...

  4. 7 CFR 1980.488 - Guaranteed industrial development bond issues.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 14 2012-01-01 2012-01-01 false Guaranteed industrial development bond issues. 1980.488 Section 1980.488 Agriculture Regulations of the Department of Agriculture (Continued) RURAL..., DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL Business and Industrial...

  5. 7 CFR 1980.488 - Guaranteed industrial development bond issues.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Guaranteed industrial development bond issues. 1980.488 Section 1980.488 Agriculture Regulations of the Department of Agriculture (Continued) RURAL..., DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL Business and Industrial...

  6. 7 CFR 1980.488 - Guaranteed industrial development bond issues.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 14 2011-01-01 2011-01-01 false Guaranteed industrial development bond issues. 1980.488 Section 1980.488 Agriculture Regulations of the Department of Agriculture (Continued) RURAL..., DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL Business and Industrial...

  7. United Nations geothermal activities in developing countries

    SciTech Connect

    Beredjick, N.

    1987-07-01

    The United Nations implements technical cooperation projects in developing countries through its Department of Technical Cooperation for Development (DTCD). The DTCD is mandated to explore for and develop natural resources (water, minerals, and relevant infrastructure) and energy - both conventional and new and renewable energy sources. To date, the United Nations has been involved in over 30 geothermal exploration projects (completed or underway) in 20 developing countries: 8 in Africa (Djibouti, Ethiopia, Kenya, Madagascar); 8 in Asia (China, India, Jordan, Philippines, Thailand); 9 in Latin America (Bolivia, Chile, El Salvador, Honduras, Mexico, Nicaragua, Panama) and 6 in Europe (Greece, Romania, Turkey, Yugoslavia). Today, the DTCD has seven UNDP geothermal projects in 6 developing countries. Four of these (Bolivia, China, Honduras, and Kenya) are major exploration projects whose formulation and execution has been possible thanks to the generous contributions under cost-sharing arrangements from the government of Italy. These four projects are summarized.

  8. 78 FR 64024 - National Industrial Security Program Policy Advisory Committee (NISPPAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-25

    ... RECORDS ADMINISTRATION Information Security Oversight Office National Industrial Security Program Policy... Industrial Security Program policy matters. DATES: The meeting will be held on November 14, 2013 from 10:00 a... NISPPAC@nara.gov . Dated: October 21, 2013. Patrice Little Murray, Acting Committee Management...

  9. 78 FR 38077 - National Industrial Security Program Policy Advisory Committee (NISPPAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-25

    ... RECORDS ADMINISTRATION Information Security Oversight Office National Industrial Security Program Policy... Industrial Security Program policy matters. DATES: The meeting will be held on July 17, 2013 from 10:00 a.m... NISPPAC@nara.gov . Dated: June 19, 2013. Patrice Little Murray, Acting Committee Management...

  10. A Review of Propulsion Industrial Base Studies and an Introduction to the National Institute of Rocket Propulsion Systems

    NASA Technical Reports Server (NTRS)

    Doreswamy, Rajiv; Fry, Emma K.

    2012-01-01

    Over the past decade there have been over 40 studies that have examined the state of the industrial base and infrastructure that supports propulsion systems development in the United States. This paper offers a comprehensive, systematic review of these studies and develops conclusions and recommendations in the areas of budget, policy, sustainment, infrastructure, workforce retention and development and mission/vision and policy. The National Institute for Rocket Propulsion System (NIRPS) is a coordinated, national organization that is responding to the key issues highlighted in these studies. The paper outlines the case for NIRPS and the specific actions that the Institute is taking to address these issues.

  11. Research and Development in Industry 1977. Surveys of Science Resources Series.

    ERIC Educational Resources Information Center

    National Science Foundation, Washington, DC. Div. of Science Resources Studies.

    The National Science Foundation sponsored Survey of Industrial Research and Development for 1977 was conducted by the Bureau of the Census in January 1978. Approximately 1,500 R&D-performing companies participated in the survey. Remarks attributed to company officials were based on discussions with representatives from leading R&D-performing…

  12. The State and Industrial Development in Late Nineteenth and Early Twentieth Century Peru.

    ERIC Educational Resources Information Center

    Friedman, Douglas

    Spanish American political and economic development has historically diverged from the other Western geographic areas. The economic systems of these nations have been characterized as dependent, and their political systems have reflected instability, authoritarian rule, and fraudulent democracy. In Peru, industrial progress began in the late 19th…

  13. Career Planning: Developing the Nation's Primary Resource.

    ERIC Educational Resources Information Center

    Jarvis, Phillip S.

    Career planning is the most critical ingredient in developing a nation's primary resource, its workers. A 1988 Gallup Poll showed that 62 percent of U.S. workers had no career goal when they began their first job, and more than 50 percent felt they were in the wrong job. The same results probably could be applied to Canada. Career planning skills…

  14. Will National Vocational Qualifications Work? Evidence from the Construction Industry.

    ERIC Educational Resources Information Center

    Callender, Claire

    A study was conducted in Britain between October 1990 and June 1991 to evaluate the implementation and delivery of National Vocational Qualifications (NVQs) and the implications for the training of trainers. (NVQs are a device for assessing performance; they represent the systemization of the skills and competencies required in a wide variety of…

  15. Industrialized Nations behind in Payouts to 'Education for All'

    ERIC Educational Resources Information Center

    Honawar,Vaishali

    2006-01-01

    World leaders joined forces in Mozambique last week to exhort wealthy nations, including the United States, to step up their contributions toward educating all children in the next decade. The United Kingdom last week pledged $15 billion--annually--to give a major boost to the Education for All Fast Track Initiative that builds on a promise made…

  16. Managing air quality in a rapidly developing nation: China

    NASA Astrophysics Data System (ADS)

    Fang, Ming; Chan, Chak K.; Yao, Xiaohong

    As the world gets ready to begin the second decade of the twenty-first century, global climate change has been recognized as a real threat to civilization as we know it. The rapid and successful economic growth of developing nations, particularly China and India, is contributing to climate change. The route to initial economic success in China followed that of the developed nations through the development of industries. Unfortunately, China's environmental protection efforts have not been the same as in developed countries because China is vastly different culturally, socially, economically and, especially, politically from developed nations. When China started to deal with environmental concerns in the late 1970s, it took advantage of the experiences of other countries in establishing environmental standards and regulations, but it did not have a model to follow when it came to implementing these standards and regulations because of the abovementioned differences. Economically, China is transitioning from an agricultural base into an industrial base; however, even now, 60% of the population remains farmers. China has been and still is heavily dependent upon coal for energy, resulting in serious atmospheric particulate pollution. While growing efforts have been expended on the environment, at this juncture of its economic development, China would be well served to revisit the traditional "develop first and clean up later" approach and to find a balance between development and protecting the environment. Against this backdrop, a reflective look of the effort to manage air quality from 1949-2008 (with an emphasis on the past 30 years) in China is presented in this paper. The environmental component of the 2008 Olympic Games is examined as a special example to illustrate the current measures being used to improve air quality in China.

  17. IMPROVING INDUSTRIAL WASTEWATER TREATMENT PROCESS RELIABILITY TO ENHANCE SUSTAINABLE DEVELOPMENT

    EPA Science Inventory

    Sustainable development includes the recovery of resources from industrial manufacturing processes. One valuable resource that can often be purified and reused is process wastewater. Typically, pollutants are removed from process wastewater using physical, chemical, and biologica...

  18. Development of orphan vaccines: an industry perspective.

    PubMed Central

    Lang, J.; Wood, S. C.

    1999-01-01

    The development of vaccines against rare emerging infectious diseases is hampered by many disincentives. In the face of growing in-house expenditures associated with research and development projects in a complex legal and regulatory environment, most pharmaceutical companies prioritize their projects and streamline their product portfolio. Nevertheless, for humanitarian reasons, there is a need to develop niche vaccines for rare diseases not preventable or curable by other means. The U.S. Orphan Drug Act of 1983 and a similar proposal from the European Commission (currently under legislative approval) provide financial and practical incentives for the research and development of drugs to treat rare diseases. In addition, updated epidemiologic information from experts in the field of emerging diseases; increased disease awareness among health professionals, patients, and the general public; a list of priority vaccines; emergence of a dedicated organization with strong leadership; and the long-term pharmacoeconomic viability of orphan products will be key factors in overcoming the complexity of orphan status and the limited need for vaccine. PMID:10603207

  19. An Industrially Developed Basic Chemistry Course.

    ERIC Educational Resources Information Center

    Collins, L. W.; Haws, L. D.

    1979-01-01

    Describes a practical, job-related, 3 1/2 month long, basic chemistry course developed by Monsanto Research Corporation to train laboratory technicians and service employees. The course, centered around 31 chemistry topics, is designed to supplement university courses and stresses application of concepts. (BT)

  20. Waste incineration industry and development policies in China.

    PubMed

    Li, Yun; Zhao, Xingang; Li, Yanbin; Li, Xiaoyu

    2015-12-01

    The growing pollution from municipal solid waste due to economic growth and urbanization has brought great challenge to China. The main method of waste disposal has gradually changed from landfill to incineration, because of the enormous land occupation by landfills. The paper presents the results of a study of the development status of the upstream and downstream of the waste incineration industry chain in China, reviews the government policies for the waste incineration power industry, and provides a forecast of the development trend of the waste incineration industry.

  1. Waste incineration industry and development policies in China.

    PubMed

    Li, Yun; Zhao, Xingang; Li, Yanbin; Li, Xiaoyu

    2015-12-01

    The growing pollution from municipal solid waste due to economic growth and urbanization has brought great challenge to China. The main method of waste disposal has gradually changed from landfill to incineration, because of the enormous land occupation by landfills. The paper presents the results of a study of the development status of the upstream and downstream of the waste incineration industry chain in China, reviews the government policies for the waste incineration power industry, and provides a forecast of the development trend of the waste incineration industry. PMID:26303653

  2. Economic and Technological Role of Kuzbass Industry in the Implementation of National Energy Strategy of Russian Federation

    NASA Astrophysics Data System (ADS)

    Zhironkin, S. A.; Khoreshok, A. A.; Tyulenev, M. A.; Barysheva, G. A.; Hellmer, M. C.

    2016-08-01

    This article describes the problems and prospects of development of coal mining in Kuzbass - the center of coal production in Siberia and Russia, in the framework of the major initiatives of the National Energy Strategy for the period until 2035. The structural character of the regional coal industry problems, caused by decline in investment activity, high level of fixed assets depreciation, slow development of deep coal processing and technological reduction of coal mining is shown.

  3. Industrial Superconducting Quantum Computer Development in Canada

    NASA Astrophysics Data System (ADS)

    Rose, Geordie

    2002-05-01

    Quantum computation is one of the most active areas of research in academia. Nearly every university in the world that has a science department has researchers who are working on either trying to build hardware or develop algorithms for these machines. In this talk I will describe D-Wave's goals and achievements in assembling a global research network, centered in Canada, whose purpose is the development of superconducting quantum computer hardware. In addition I will describe the technical approach that we are concentrating on, involving cuprate-based flux qubits and niobium RSFQ control circuitry. Finally I will introduce a very important application of these machines, namely their use as simulators of other quantum systems, in the context of human pharmaceutical drug and vaccine design.

  4. DOE EM industry programs robotics development

    SciTech Connect

    Staubly, R.; Kothari, V.

    1998-12-31

    The Office of Science and Technology (OST) manages an aggressive program for RD and D, as well as testing and evaluation for the Department of Energy`s (DOE`s) Environmental Management (EM) organization. The goal is to develop new and improved environmental restoration and waste management technologies to clean up the inventory of the DOE weapons complex faster, safer, and cheaper than is possible with currently available technologies. Robotic systems reduce worker exposure to the absolute minimum, while providing proven, cost-effective, and, for some applications, the only acceptable technique for addressing challenging problems. Development of robotic systems for remote operations occurs in three main categories: tank waste characterization and retrieval; decontamination and dismantlement; and characterization, mapping, and inspection systems. In addition, the Federal Energy Technology Center (FETC) has some other projects which fall under the heading of supporting R and D. The central objective of all FETC robotic projects is to make robotic systems more attractive by reducing costs and health risks associated with the deployment of robotic technologies in the cleanup of the nuclear weapons complex. This will be accomplished through development of robots that are cheaper, faster, safer, and more reliable, as well as more straightforward to modify/adapt and more intuitive to operate with autonomous capabilities and intelligent controls that prevent accidents and optimize task execution.

  5. The industrial challenge in reproductive drug development.

    PubMed

    Southern, E M

    1978-01-01

    An enormous expenditure of time, research, and money is required to develop and market a new contraceptive in the U.S. In addition to the investigation of new scientific knowledge, the intricacy of government regulations, which are stricter for contraceptives than for most other drugs, adds to the complexity of the research process. Testing procedures are lengthy, beginning with tests on laboratory animals, and before a new contraceptive drug proven effective in animals can be tested on humans, a series of animal toxicology tests must be performed. Human clinical trials are also prolonged and complex; some 10-15 years may elapse between the discovery of a suitable contraceptive compound and final approval to market a useful product. The history of Depo-Provera illustrates some of the scientific and regulatory difficulties involved in bringing a new contraceptive to market. Because of rejection by Food and Drug Administration, despite recommendations by experts, the impact of this important new contraceptive method involving years of research has been severely curtailed. Research on prostaglandins is another contribution to the development of effective fertility control methods. Were this research to lead to the development of a safe, fully effective, self-administered agent for menstrual regulation available worldwide at a low cost, the impact on fertility could be highly significant. Overriding factors are availability of research funds and approval for marketing. Access to new, improved contraceptives will depend upon decisions by government policy-makers which effect research priorities and drug regulatory procedures.

  6. 76 FR 81327 - National Emission Standards for Hazardous Air Pollutants From the Pulp and Paper Industry

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-27

    ... Hazardous Air Pollutants From the Pulp and Paper Industry; Proposed Rule #0;#0;Federal Register / Vol. 76... Part 63 RIN 2060-AQ41 National Emission Standards for Hazardous Air Pollutants From the Pulp and Paper... proposing amendments to the national emission standards for hazardous air pollutants for the pulp and...

  7. National rf technology research and development program plan

    SciTech Connect

    Not Available

    1983-05-01

    This plan was prepared by the Oak Ridge National Laboratory at the request of the Office of Fusion Energy, Division of Development and Technology, to define the technology development needs and priorities. The US rf research and development community, with a wide representation from universities, laboratories and industries, participated in many discussions, meetings and in a three-day workshop in developing the needs and priorities definition. This very active and effective involvement of the rf leaders from all of these groups was an essential feature of the activity and results in the plan representing a broad consensus from the magnetic fusion energy development community. In addition, a number of scientists from Japan and Europe participated by providing data.

  8. Environmental technology development through industry partnership

    SciTech Connect

    Sebastion, R.L.

    1995-12-31

    The Coherent Laser Vision System (CLVS) is being developed to provide precision real-time 3D world views to support site characterization and robotic operations and during facilities Decontamination and Decommissioning. Autonomous or semiautonomous robotic operations requires an accurate, up-to-date 3D world view. Existing technologies for real-time 3D imaging, such as AM laser radar, have limited accuracy at significant ranges and have variability in range estimates caused by lighting or surface shading. Recent advances in fiber optic component technology and digital processing components have enabled the development of a new 3D vision system based upon a fiber optic FMCW coherent laser radar. The approach includes a compact scanner with no-moving parts capable of randomly addressing all pixels. The system maintains the immunity to lighting and surface shading conditions which is characteristic to coherent laser radar. The random pixel addressability allows concentration of scanning and processing on the active areas of a scene, as is done by the human eye-brain system. The precision measurement capability of the coherent laser radar (CLR) technology has already been demonstrated in the form of the CLR 3D Mapper, of which several copies have been delivered or are under order. The CLVS system, in contrast to the CLR 3D Mapper, will have substantially greater imaging speed with a compact no-moving parts scanner, more suitable for real-time robotic operations.

  9. 2012 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site’s Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond

    SciTech Connect

    Mike Lewis

    2013-02-01

    This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (WRU-I-0160-01, formerly LA 000160 01), for the wastewater reuse site at the Idaho National Laboratory Site’s Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond from November 1, 2011 through October 31, 2012. The report contains the following information: • Facility and system description • Permit required effluent monitoring data and loading rates • Groundwater monitoring data • Status of special compliance conditions • Discussion of the facility’s environmental impacts During the 2012 reporting year, an estimated 11.84 million gallons of wastewater were discharged to the Industrial Waste Ditch and Pond which is well below the permit limit of 17 million gallons per year. The concentrations of all permit-required analytes in the samples from the down gradient monitoring wells were below the Ground Water Quality Rule Primary and Secondary Constituent Standards.

  10. 2014 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site’s Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond

    SciTech Connect

    Lewis, Mike

    2015-02-01

    This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (WRU-I-0160-01, formerly LA 000160 01), for the wastewater reuse site at the Idaho National Laboratory Site’s Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond from November 1, 2013 through October 31, 2014. The report contains the following information; Facility and system description; Permit required effluent monitoring data and loading rates; Groundwater monitoring data; Status of special compliance conditions; Noncompliance issues; and Discussion of the facility’s environmental impacts During the 2014 reporting year, an estimated 10.11 million gallons of wastewater were discharged to the Industrial Waste Ditch and Pond which is well below the permit limit of 17 million gallons per year. The concentrations of all permit-required analytes in the samples from the down gradient monitoring wells were below the applicable Idaho Department of Environmental Quality’s groundwater quality standard levels.

  11. 2010 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site's Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond

    SciTech Connect

    David B. Frederick

    2011-02-01

    This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (#LA 000160 01), for the wastewater reuse site at the Idaho National Laboratory Site’s Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond from May 1, 2010 through October 31, 2010. The report contains the following information: • Facility and system description • Permit required effluent monitoring data and loading rates • Groundwater monitoring data • Status of special compliance conditions • Discussion of the facility’s environmental impacts During the 2010 partial reporting year, an estimated 3.646 million gallons of wastewater were discharged to the Industrial Waste Ditch and Pond which is well below the permit limit of 13 million gallons per year. The concentrations of all permit-required analytes in the samples from the down gradient monitoring wells were below the Ground Water Quality Rule Primary and Secondary Constituent Standards.

  12. 2011 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site's Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond

    SciTech Connect

    David Frederick

    2012-02-01

    This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (LA-000160-01), for the wastewater reuse site at the Idaho National Laboratory Site's Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond from November 1, 2010 through October 31, 2011. The report contains the following information: (1) Facility and system description; (2) Permit required effluent monitoring data and loading rates; (3) Groundwater monitoring data; (4) Status of special compliance conditions; and (5) Discussion of the facility's environmental impacts. During the 2011 reporting year, an estimated 6.99 million gallons of wastewater were discharged to the Industrial Waste Ditch and Pond which is well below the permit limit of 13 million gallons per year. Using the dissolved iron data, the concentrations of all permit-required analytes in the samples from the down gradient monitoring wells were below the Ground Water Quality Rule Primary and Secondary Constituent Standards.

  13. Industry-University Collaboration for Continuing Professional Development

    ERIC Educational Resources Information Center

    Slotte, Virpi; Tynjala, Paivi

    2003-01-01

    Over the past few years developments in higher education have brought us to a position where collaboration between the university and the private sector is becoming more and more common. The industry approach to continuing professional development is based on the needs of acquiring, developing and retaining a skilled and competent workforce.…

  14. Developing Customized Programs for Steel and Other Heavy Industries.

    ERIC Educational Resources Information Center

    Day, Philip R., Jr.

    1984-01-01

    Describes Dundalk Community College's (DCC's) customized training programs for local industries. Looks at employment problems and outlook in Baltimore County, the development of a training agreement with Bethlehem Steel, the use of the Developing a Curriculum (DACUM) process to develop skill profiles, and future directions. (DMM)

  15. Work environment and production development in Swedish manufacturing industry.

    PubMed

    Johansson, Bo

    2010-01-01

    Swedish manufacturing industry has previous held a leading position regarding the development of attractive industrial work environments, but increasing market competition has changed the possibilities to maintain the position. The purpose of this literature study is therefore to describe and analyze how Swedish manufacturing industry manages work environment and production development in the new millennium. The description and analysis is based on recently reported Swedish research and development. The gathered picture of how production systems generally are developed in Sweden strongly contrasts against the idealized theoretical and legal view of how production systems should be developed. Even if some of the researchers' and authorities' ambitions and demands may seem unrealistically high today, there still is a very large potential for improving the processes and tools for designing production systems and work environment. PMID:20828493

  16. Work environment and production development in Swedish manufacturing industry.

    PubMed

    Johansson, Bo

    2010-01-01

    Swedish manufacturing industry has previous held a leading position regarding the development of attractive industrial work environments, but increasing market competition has changed the possibilities to maintain the position. The purpose of this literature study is therefore to describe and analyze how Swedish manufacturing industry manages work environment and production development in the new millennium. The description and analysis is based on recently reported Swedish research and development. The gathered picture of how production systems generally are developed in Sweden strongly contrasts against the idealized theoretical and legal view of how production systems should be developed. Even if some of the researchers' and authorities' ambitions and demands may seem unrealistically high today, there still is a very large potential for improving the processes and tools for designing production systems and work environment.

  17. Development of Advanced Seals for Industrial Turbine Applications

    NASA Astrophysics Data System (ADS)

    Chupp, Raymond E.; Aksit, Mahmut F.; Ghasripoor, Farshad; Turnquist, Norman A.; Dinc, Saim; Mortzheim, Jason; Demiroglu, Mehmet

    2002-10-01

    A critical area being addressed to improve industrial turbine performance is reducing the parasitic leakage flows through the various static and dynamic seals. Implementation of advanced seals into General Electric (GE) industrial turbines has progressed well over the last few years with significant operating performance gains achieved. Advanced static seals have been placed in gas turbine hot gas-path junctions and steam turbine packing ring segment end gaps. Brush seals have significantly decreased labyrinth seal leakages in gas turbine compressors and turbine interstages, steam turbine interstage and end packings, industrial compressor shaft seals, and generator seals. Abradable seals are being developed for blade-tip locations in various turbine locations. This presentation summarizes the status of advanced seal development for industrial turbines at GE.

  18. An illustrated landslide handbook for developing nations

    USGS Publications Warehouse

    Highland, Lynn M.; Bobrowsky, Peter

    2008-01-01

    As landslides continue to be a hazard that account for large numbers of human and animal casualties, property loss, and infrastructure damage, as well as impacts on the natural environment, it is incumbent on developed nations that resources be allocated to educate affected populations in less developed nations, and provide them with tools to effectively manage this hazard. Given that the engineering, planning and zoning, and mitigation techniques for landslide hazard reduction are more accessible to developed nations, it is crucial that such landslide hazard management tools be communicated to less developed nations in a language that is not overly technical, and provides information on basic scientific explanations on where, why and how landslides occur. The experiences of the United States, Canada, and many other nations demonstrate that, landslide science education, and techniques for reducing damaging landslide impacts may be presented in a manner that can be understood by the layperson. There are various methods through which this may be accomplished–community-level education, technology transfer, and active one-on-one outreach to national and local governments, and non-governmental organizations (NGOs), who disseminate information throughout the general population. The population at large can also benefit from the dissemination of landslide information directly to individual community members. The United States Geological Survey and the Geological Survey of Canada have just published and will distribute a universal landslide handbook that can be easily made available to emergency managers, local governments, and individuals. The handbook, “The Landslide Handbook: A Guide to Understanding Landslides” is initially published as U.S. Geological Survey Circular 1325, in English, available in print, and accessible on the internet. It is liberally illustrated with schematics and photographs, and provides the means for a basic understanding of landslides, with

  19. [Cellular immunotherapy: complexity of immune system and industrial development].

    PubMed

    Abastado, J-P

    2003-01-01

    Cell immunotherapy aims at treating patients by stimulating their own immune system using appropriate cells. This approach is one of the most promising therapeutic strategy against cancer. The use of cells, the mobilization of a system, the targeting of interactions between the immune system and the tumor constitute the hallmarks of complexity, an area of intense academic and industrial research during the past twenty years. The present article reviews some unique characteristics of the industrial development of these cell drugs.

  20. Sugar Industry Influence on the Scientific Agenda of the National Institute of Dental Research’s 1971 National Caries Program: A Historical Analysis of Internal Documents

    PubMed Central

    Kearns, Cristin E.; Glantz, Stanton A.; Schmidt, Laura A.

    2015-01-01

    Background In 1966, the National Institute of Dental Research (NIDR) began planning a targeted research program to identify interventions for widespread application to eradicate dental caries (tooth decay) within a decade. In 1971, the NIDR launched the National Caries Program (NCP). The objective of this paper is to explore the sugar industry’s interaction with the NIDR to alter the research priorities of the NIDR NCP. Methods and Findings We used internal cane and beet sugar industry documents from 1959 to 1971 to analyze industry actions related to setting research priorities for the NCP. The sugar industry could not deny the role of sucrose in dental caries given the scientific evidence. They therefore adopted a strategy to deflect attention to public health interventions that would reduce the harms of sugar consumption rather than restricting intake. Industry tactics included the following: funding research in collaboration with allied food industries on enzymes to break up dental plaque and a vaccine against tooth decay with questionable potential for widespread application, cultivation of relationships with the NIDR leadership, consulting of members on an NIDR expert panel, and submission of a report to the NIDR that became the foundation of the first request for proposals issued for the NCP. Seventy-eight percent of the sugar industry submission was incorporated into the NIDR’s call for research applications. Research that could have been harmful to sugar industry interests was omitted from priorities identified at the launch of the NCP. Limitations are that this analysis relies on one source of sugar industry documents and that we could not interview key actors. Conclusions The NCP was a missed opportunity to develop a scientific understanding of how to restrict sugar consumption to prevent tooth decay. A key factor was the alignment of research agendas between the NIDR and the sugar industry. This historical example illustrates how industry protects

  1. Idaho National Engineering Laboratory site development plan

    SciTech Connect

    Not Available

    1994-09-01

    This plan briefly describes the 20-year outlook for the Idaho National Engineering Laboratory (INEL). Missions, workloads, worker populations, facilities, land, and other resources necessary to fulfill the 20-year site development vision for the INEL are addressed. In addition, the plan examines factors that could enhance or deter new or expanded missions at the INEL. And finally, the plan discusses specific site development issues facing the INEL, possible solutions, resources required to resolve these issues, and the anticipated impacts if these issues remain unresolved.

  2. Industry

    SciTech Connect

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  3. Globalization and Industrialization in 64 Developing Countries, 1980-2003

    ERIC Educational Resources Information Center

    Kaya, Yunus

    2010-01-01

    This study investigates the effect of the latest wave of economic globalization on manufacturing employment in developing countries. It revisits the classic debate on the effect of internal and external influences on industrialization, and extends this debate to contemporary developing countries. In the process, it assesses the evidence for…

  4. Development of Bulk Nanocrystalline Cemented Tungsten Carbide for Industrial Applicaitons

    SciTech Connect

    Z. Zak Fang, H. Y. Sohn

    2009-03-10

    This report contains detailed information of the research program entitled "Development of Bulk Nanocrystalline Cemented Tungsten Carbide Materials for Industrial Applications". The report include the processes that were developed for producing nanosized WC/Co composite powders, and an ultrahigh pressure rapid hot consolidation process for sintering of nanosized powders. The mechanical properties of consolidated materials using the nanosized powders are also reported.

  5. An Approach for Measuring Reductions in Operations, Maintenance, and Energy Costs: Baseline Measures of Construction Industry Practices for the National Construction Goals.

    ERIC Educational Resources Information Center

    Chapman, Robert E.; Rennison, Roderick

    The Construction and Building Subcommittee of the National Science and Technology Council (NSTC) has established seven National Construction Goals for the construction industry and is developing baseline measures for current practices and progress with respect to each goal. This document provides a detailed set of baseline measures for the NSTC…

  6. Industrial hygiene concerns associated with oil shale development

    SciTech Connect

    Ettinger, H.J.

    1980-01-01

    Health protection concerns (including industrial hygiene, safety, and occupational medicine) must be evaluated to insure that development of the oil shale industry proceeds without significant risk to the health of the workers involved. These concerns need to be identified in the early stages of developing this industry. To provide a basis for discussing potential health protection concerns related to oil shale, it is necessary to briefly discuss the magnitude and characteristics of this resource; the alternate proposed technologies; and the unit operations which make up the operating system. This subject has been detailed in many publications, among them reports prepared for the Environmental Protection Agency. This discussion will be limited to providing sufficient background to put industrial hygiene and other health protection concerns in perspective, and will include a brief description of typical technologies under consideration. It will not provide a detailed description of these technologies, or attempt to cover all the alternate technologies which may be applied to the development of oil shale. However, a basis for considering potential health protection problems associated with development of this industry will be established.

  7. Federal agencies active in chemical industry-related research and development

    SciTech Connect

    1995-09-29

    The Energy Policy Act of 1992 calls for a program to further the commercialization of renewable energy and energy efficient technologies for the industrial sector.. The primary objective of the Office of Industrial Technologies Chemical Industry Team is to work in partnership with the US chemical industry to maximize economic, energy, and environmental benefits through research and development of innovative technologies. This document was developed to inventory organizations within the federal government on current chemical industry-related research and development. While an amount of funding or number of projects specifically relating to chemical industry research and development was not defined in all organizations, identified were about 60 distinct organizations representing 7 cabinet-level departments and 4 independent agencies, with research efforts exceeding $3.5 billion in fiscal year 1995. Effort were found to range from less than $500 thousand per year at the Departments of Agriculture and the Interior to over $100 million per year at the Departments of Commerce, Defense, Energy, and Health and Human Services and the National Aeronautics and Space Administration. The total number of projects in these programs exceeded 10,000. This document is complete to the extent that agencies volunteered information. Additions, corrections, and changes are encouraged and will be incorporated in future revisions.

  8. Hydrothermal industrialization electric-power systems development. Final report

    SciTech Connect

    Not Available

    1982-03-01

    The nature of hydrothermal resources, their associated temperatures, geographic locations, and developable capacity are described. The parties involved in development, required activities and phases of development, regulatory and permitting requirements, environmental considerations, and time required to complete development activities ae examined in detail. These activities are put in proper perspective by detailing development costs. A profile of the geothermal industry is presented by detailing the participants and their operating characteristics. The current development status of geothermal energy in the US is detailed. The work on market penetration is summarized briefly. Detailed development information is presented for 56 high temperature sites. (MHR)

  9. A Survey of LTR Program Industry Partner Satisfaction at Oak Ridge National Lab

    SciTech Connect

    Coxon, G.; Payne, T.L.

    1999-11-14

    The Oak Ridge National Laboratory (ORNL) is ''bringing science to life'' through the creation of knowledge; the invention of new tools and techniques; the scientific analysis of complex situations; and the design, construction and operation of research facilities used by scientists and engineers from throughout the world. ORNL creates and uses partnerships as a means for conducting collaborative research and development (R and D), facilitating access to its capabilities, improving the utilization of its unique science and technological facilities, and assisting in commercialization of technology. This paper will concentrate on seven of the mechanisms used to access ORNL facilities and expertise namely, Cooperative Research and Development Agreements, License Agreements, Personnel Exchanges, Small Business Innovative Research and Small Business Technology Transfer Partnerships, Technical Assistance Program, User Facility Agreements, and Work For Others Agreements. Cooperative Research and Development Agreements, also known as CRADAs, create formal teams of researchers from ORNL and private industry for the purpose of collaborating on an R and D area of interest to both partners. License Agreements give commercial entities authorization to use ORNL-developed technologies for specified purposes. A Personnel Exchange either locates ORNL employees at the site of the partner organization, or, brings the employee(s) of the outside organization to ORNL to enhance their technical capabilities. The Small Business Innovative Research (SBIR) Program and the Small Business Technology Transfer (STTR) Program provide government-funded partnership opportunities for qualified small private companies. The ORNL Technical Assistance Program can provide a rapid response to a technical question from a business entity. User Facility Agreements provide qualified users from universities, industry, or other institution access to ORNL's 14 designated user facilities where both proprietary

  10. The transfer of remote sensing technology in the developing nations: An observation

    NASA Technical Reports Server (NTRS)

    Abiodun, A. A.

    1977-01-01

    The cooperation and assistance of industrialized nations and the United Nations and its agencies in promoting the transfer of remote sensing technology in developing nations was discussed. Training programs, workshops, and seminars as well as on-going globally scattered demonstration projects were evaluated and it was suggested that emphasis should shift from centralized training to scheduled regional training programs, resulting in larger local participation and on-the-spot application of the technology to solve local problems.

  11. Industry and government perspectives on First Nations' participation in the British Columbia environmental assessment process

    SciTech Connect

    Booth, Annie L. Skelton, Norm W.

    2011-04-15

    Research was conducted with West Moberly First Nations, Halfway First Nation and the Treaty 8 Tribal Association (located in northeastern British Columbia, Canada) on effective engagement in environmental assessment processes. As part of this research, we examined the perspectives of a subset of resource industry proponents and their consultants, as well as staff from the British Columbia Environmental Assessment Office on their experiences with the requirement to consult with Canada's indigenous peoples. Research into the perspectives of industry proponents and consultants is almost non-existent, yet industry and governments are key participants within environmental assessments. This research found that industry proponents were disenfranchised by the British Columbia environmental assessment process and its mechanisms for consulting with First Nations, and that they sought changes to that process. Their concerns and their implications are documented and some recommendations are offered for addressing those concerns. Understanding industry and government views on First Nations engagement could suggest not only potential improvements in EA processes that facilitate all parties but provide common grounds for mutually engaging to resolve challenges.

  12. [The pharmaceutical industry in the industrial chemical group: the National Union of Chemical-Pharmaceutical Laboratories (1919-1936)].

    PubMed

    Nozal, Raúl Rodríquez

    2011-01-01

    The pharmaceutical industry associations, as it happened with other businesses, had a significant rise during the dictatorship of Primo de Rivera and II Republic. The 'Cámara Nacional de Industrias Químicas', in Barcelona, represented the national chemical industry to its ultimate assimilation by the 'Organización Sindical' in 1939. In this association, matters relating to pharmaceutical products -- which we will especially deal with in this work -- were managed by the 'Unión Nacional de Laboratorios Químico-Farmacéuticos', which defended the interests of pharmaceutical companies in the presence of government authorities, using the resources and mechanisms also managed by business pressure groups. The inclusion of industrial pharmacy in the Chemical lobby separated the pharmaceutical industry from traditional exercise and its corporate environment. this created ups and downs, conflicts of interests and finally, love and hate relationships with their colleagues of the pharmacy work placement and, of course, with the association that represented them: the 'Unión Farmacéutica Nacional'.

  13. [The pharmaceutical industry in the industrial chemical group: the National Union of Chemical-Pharmaceutical Laboratories (1919-1936)].

    PubMed

    Nozal, Raúl Rodríquez

    2011-01-01

    The pharmaceutical industry associations, as it happened with other businesses, had a significant rise during the dictatorship of Primo de Rivera and II Republic. The 'Cámara Nacional de Industrias Químicas', in Barcelona, represented the national chemical industry to its ultimate assimilation by the 'Organización Sindical' in 1939. In this association, matters relating to pharmaceutical products -- which we will especially deal with in this work -- were managed by the 'Unión Nacional de Laboratorios Químico-Farmacéuticos', which defended the interests of pharmaceutical companies in the presence of government authorities, using the resources and mechanisms also managed by business pressure groups. The inclusion of industrial pharmacy in the Chemical lobby separated the pharmaceutical industry from traditional exercise and its corporate environment. this created ups and downs, conflicts of interests and finally, love and hate relationships with their colleagues of the pharmacy work placement and, of course, with the association that represented them: the 'Unión Farmacéutica Nacional'. PMID:22372007

  14. Women and national development in Africa.

    PubMed

    Lindsay, B; Milner, M; Harris, J J

    1977-03-01

    Factors influencing the integration of African women into the modern sectors of the economy are examined for purposes of aiding national development and improving the contemporary status of women. Focus is on some historical and social reasons for the traditional roles of women in agriculture, commerce and wage employment and some adverse effects of development. The combined influence of colonialism and traditional African values resulted in both men and women defining the female role as domestic. A view of women as 2nd class citizens further works to hinder the national development process by giving women a narrow perception of their own roles in society. Although technological and educational advances have proven beneficial to society as a whole, certain aspects of advancement have had adverse effects on women. The innovation of crop rotation, along with improved farming tools, has made it possible for fewer members of the household to do the farming chores. This has meant that the women acquire the major responsibility for the farming while the men migrate to towns seeking wage imployment. Education is the major tool for integrating women into the modern sectors of the society. PMID:12261782

  15. Women and national development in Africa.

    PubMed

    Lindsay, B; Milner, M; Harris, J J

    1977-03-01

    Factors influencing the integration of African women into the modern sectors of the economy are examined for purposes of aiding national development and improving the contemporary status of women. Focus is on some historical and social reasons for the traditional roles of women in agriculture, commerce and wage employment and some adverse effects of development. The combined influence of colonialism and traditional African values resulted in both men and women defining the female role as domestic. A view of women as 2nd class citizens further works to hinder the national development process by giving women a narrow perception of their own roles in society. Although technological and educational advances have proven beneficial to society as a whole, certain aspects of advancement have had adverse effects on women. The innovation of crop rotation, along with improved farming tools, has made it possible for fewer members of the household to do the farming chores. This has meant that the women acquire the major responsibility for the farming while the men migrate to towns seeking wage imployment. Education is the major tool for integrating women into the modern sectors of the society.

  16. Applications of space technology to developing nations

    NASA Technical Reports Server (NTRS)

    Freden, S. C.

    1976-01-01

    The use of imagery from the Landsat spacecraft for the monitoring and management of natural resources in developing countries is discussed. The Landsat imagery can be used to make cartographic maps at scales of 1:250,000 which meet the US National Map Accuracy Standards, providing a means of map updating to correct for river meanders or changing shorelines. The Landsat data can also be used in defining and measuring agricultural areas, identifying pest breeding areas, and monitoring irrigation practices and crop performance. Total volume estimates can be obtained in many cases for surface bodies of water, and subsurface water supplies can be detected from changes in vegetation in some instances.

  17. 78 FR 32241 - U.S. Air Force Seeks Industry Input for National Security Space Launch Assessment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-29

    ... have to improve national launch capabilities or aid industry in lowering the cost of space access? 4. What aspects of future DoD launch service or systems acquisitions would contribute to industrial...

  18. The urban-rural dimension in national economic development.

    PubMed

    Egan, M L; Bendick M

    1986-01-01

    Urban growth should be evaluated less as good or bad in itself than in terms of whether it promotes the efficient and equitable performance of vital economic functions within a nation. Much urban growth in developing nations both reflects national growth and promotes it. Cities are sources of economic growth, which is their dominant characteristic. There is a strong tendency for large cities and their surrounding core regions to be the most active, rapidly growing areas of developing nations. Certain economic functions tend to be found only in cities and tend to cluster into certain cities because it is economically efficient. 3 mechanisms which make cities economically efficient are 1) internal economies of scale, 2) localization economies, and 3) agglomeration economies. Urban areas can provide support functions for rural areas and, in turn, their growth depends on the support of an agricultural base. Urban areas also provide alternative employment and income opportunities for the rural surplus population. There are 4 prominent questions often raised about possible negative effects of urbanization on national growth and development. One question is urban growth and urban bias, which the authors argue is overemphasized. Another question is diseconomies of scale in large cities; this, the authors suggest, is not a matter of size as much as operating efficiently. Third is urbanization and regional dualism, which the authors argue can be maintained through a strategy of changing a nation's mix and location of urban activity. Fourth is the question of cities and rural outmigration. The authors argue that although most people who leave rural areas are younger, more motivated, and better educated than those left behind, their departures are economically favorable. Getting economic activity located correctly along an urban-rural spectrum is important to the growth of developing countries. 6 rules that illustrate how to do this are 1) be guided by local circumstances, not

  19. Government and industry interactions in the development of clock technology

    NASA Technical Reports Server (NTRS)

    Hellwig, H.

    1981-01-01

    It appears likely that everyone in the time and frequency community can agree on goals to be realized through the expenditure of resources. These goals are the same as found in most fields of technology: lower cost, better performance, increased reliability, small size and lower power. Related aspects are examined in the process of clock and frequency standard development. Government and industry are reviewed in a highly interactive role. These interactions include judgements on clock performance, what kind of clock, expenditure of resources, transfer of ideas or hardware concepts from government to industry, and control of production. Successful clock development and production requires a government/industry relationship which is characterized by long-term continuity, multidisciplinary team work, focused funding and a separation of reliability and production oriented tasks from performance improvement/research type efforts.

  20. 78 FR 46923 - National Climate Assessment and Development Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-02

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration National Climate Assessment and Development Advisory Committee AGENCY: Office of Oceanic and Atmospheric Research (OAR), National Oceanic and...

  1. Market development directory for solar industrial process heat systems

    SciTech Connect

    1980-02-01

    The purpose of this directory is to provide a basis for market development activities through a location listing of key trade associations, trade periodicals, and key firms for three target groups. Potential industrial users and potential IPH system designers were identified as the prime targets for market development activities. The bulk of the directory is a listing of these two groups. The third group, solar IPH equipment manufacturers, was included to provide an information source for potential industrial users and potential IPH system designers. Trade associates and their publications are listed for selected four-digit Standard Industrial Code (SIC) industries. Since industries requiring relatively lower temperature process heat probably will comprise most of the near-term market for solar IPH systems, the 80 SIC's included in this chapter have process temperature requirements less than 350/sup 0/F. Some key statistics and a location list of the largest plants (according to number of employees) in each state are included for 15 of the 80 SIC's. Architectural/engineering and consulting firms are listed which are known to have solar experience. Professional associated and periodicals to which information on solar IPH sytstems may be directed also are included. Solar equipment manufacturers and their associations are listed. The listing is based on the SERI Solar Energy Information Data Base (SEIDB).

  2. National research and development program in the energy field

    NASA Astrophysics Data System (ADS)

    1982-06-01

    Scientific, technological, and economic criteria were established to clarify, in a total context, the choices open to Belgium in meeting the energy crisis and in reducing dependence on foreign sources of fuels and strategic materials. Mathematical models were developed to describe the energy supply and demand in both the industrial and residential sectors. For the period from 1982 to 1987, activities concentrate on analyzing the energy system; determining reasonable use of energy in all sectors; investigating fossil energy and the energetic vectors of substitution and biomass; automating processes for the production of solar cells and the development solar receivers and photovoltaic systems; and recycling and stockpiling strategic materials. A documentation center was established to evaluate national and international research results.

  3. 26 CFR 1.103-7 - Industrial development bonds.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... debt obligations comprising the bond issue satisfy the trade or business test. If, however, less than a..., the debt obligations will not be industrial development bonds. Also, when publicly-owned facilities... person for purposes of the trade or business test. (ii) In determining whether a debt obligation...

  4. Research and Development in the Educational Materials Industries.

    ERIC Educational Resources Information Center

    Carnegie Corp. of New York, NY.

    Under the sponsorship of the Carnegie Corporation and the Ford Foundation, a study was instituted to examine research and development in the educational materials industry. Using the open-ended interview method, data was collected from executives of major book publishers and their subsidiaries, and producers of materials other than books.…

  5. Geothermal agriculture industrial park development in south-central Colorado

    SciTech Connect

    Goering, S.W.; Connor, F.R.; Coury, G.E.

    1980-12-01

    The preferred site for both near-term aquaculture use and for extensive geothermal-based industrial park development are identified on the basis of geothermal resource potential, site ownership and leasing considerations, and other important non-energy considerations such as raw material, labor availability, and transportation systems. A planned mushroom farm using geothermal heating is described. (MHR)

  6. Higher Education in Support of Regional Economic and Industrial Development.

    ERIC Educational Resources Information Center

    Watson, Joseph A.; McGinn, M. J.

    1987-01-01

    Presentations at the September 1985 conference of the International Association of Consultants in Higher Education Institutions are reviewed. Activities related to university-industry cooperation for regional development in Japan and Massachusetts and at Stanford University and Queens University in Ireland are summarized. (MSE)

  7. Career Development in the Workplace: Academia and Industry Join Hands.

    ERIC Educational Resources Information Center

    Haag-Mutter, Priscilla

    Sinclair Community College (SCC) in Dayton, Ohio has designed a career development workshop for both hourly and salaried employees of Monarch Marking, Inc., to help the local industry to encourage its motivated employees to set and start working toward new career goals within the company. From 12 to 15 employees take part in each 16-hour,…

  8. New Technology and Human Resource Development in the Automobile Industry.

    ERIC Educational Resources Information Center

    Organisation for Economic Cooperation and Development, Paris (France). Centre for Educational Research and Innovation.

    This document contains five case studies of plants within large enterprises in the automobile industry (Ford, Toyota, Volkswagen, Renault, and Volvo), plus reports of each company's views on human resource development, new technology, and changes in work organization and skill formation. The document is composed of five narrative sections,…

  9. [Example of product development by industry and research solidarity].

    PubMed

    Seki, Masayoshi

    2014-01-01

    When the industrial firms develop the product, the research result from research institutions is used or to reflect the ideas from users on the developed product would be significant in order to improve the product. To state the software product which developed jointly as an example to describe the adopted development technique and its result, and to consider the modality of the industry solidarity seen from the company side and joint development. The software development methods have the merit and demerit and necessary to choose the optimal development technique by the system which develops. We have been jointly developed the dose distribution browsing software. As the software development method, we adopted the prototype model. In order to display the dose distribution information, it is necessary to load four objects which are CT-Image, Structure Set, RT-Plan, and RT-Dose, are displayed in a composite manner. The prototype model which is the development technique was adopted by this joint development was optimal especially to develop the dose distribution browsing software. In a prototype model, since the detail design was created based on the program source code after the program was finally completed, there was merit on the period shortening of document written and consist in design and implementation. This software eventually opened to the public as an open source. Based on this developed prototype software, the release version of the dose distribution browsing software was developed. Developing this type of novelty software, it normally takes two to three years, but since the joint development was adopted, it shortens the development period to one year. Shortening the development period was able to hold down to the minimum development cost for a company and thus, this will be reflected to the product price. The specialists make requests on the product from user's point of view are important, but increase in specialists as professionals for product

  10. [Example of product development by industry and research solidarity].

    PubMed

    Seki, Masayoshi

    2014-01-01

    When the industrial firms develop the product, the research result from research institutions is used or to reflect the ideas from users on the developed product would be significant in order to improve the product. To state the software product which developed jointly as an example to describe the adopted development technique and its result, and to consider the modality of the industry solidarity seen from the company side and joint development. The software development methods have the merit and demerit and necessary to choose the optimal development technique by the system which develops. We have been jointly developed the dose distribution browsing software. As the software development method, we adopted the prototype model. In order to display the dose distribution information, it is necessary to load four objects which are CT-Image, Structure Set, RT-Plan, and RT-Dose, are displayed in a composite manner. The prototype model which is the development technique was adopted by this joint development was optimal especially to develop the dose distribution browsing software. In a prototype model, since the detail design was created based on the program source code after the program was finally completed, there was merit on the period shortening of document written and consist in design and implementation. This software eventually opened to the public as an open source. Based on this developed prototype software, the release version of the dose distribution browsing software was developed. Developing this type of novelty software, it normally takes two to three years, but since the joint development was adopted, it shortens the development period to one year. Shortening the development period was able to hold down to the minimum development cost for a company and thus, this will be reflected to the product price. The specialists make requests on the product from user's point of view are important, but increase in specialists as professionals for product

  11. Australia’s first national level quantitative environmental justice assessment of industrial air pollution

    NASA Astrophysics Data System (ADS)

    Chakraborty, Jayajit; Green, Donna

    2014-04-01

    This study presents the first national level quantitative environmental justice assessment of industrial air pollution in Australia. Specifically, our analysis links the spatial distribution of sites and emissions associated with industrial pollution sources derived from the National Pollution Inventory, to Indigenous status and social disadvantage characteristics of communities derived from Australian Bureau of Statistics indicators. Our results reveal a clear national pattern of environmental injustice based on the locations of industrial pollution sources, as well as volume, and toxicity of air pollution released at these locations. Communities with the highest number of polluting sites, emission volume, and toxicity-weighted air emissions indicate significantly greater proportions of Indigenous population and higher levels of socio-economic disadvantage. The quantities and toxicities of industrial air pollution are particularly higher in communities with the lowest levels of educational attainment and occupational status. These findings emphasize the need for more detailed analysis in specific regions and communities where socially disadvantaged groups are disproportionately impacted by industrial air pollution. Our empirical findings also underscore the growing necessity to incorporate environmental justice considerations in environmental planning and policy-making in Australia.

  12. Cooperative Science: A National Study of University and Industry Researchers. Case Studies. Volume II.

    ERIC Educational Resources Information Center

    Johnson, Elmima C.; And Others

    This report presents nine case studies of Industry/University Cooperative Research (IUCR) projects supported during 1978-1980 by the National Science Foundation. The intent of this document is to provide readers with a qualitative picture of cooperative science as practiced under the IUCR program. The information presented in this report is…

  13. National Arboretum Solves Green Industry Problems with a Multi-Disciplinary Research Approach

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The ornamental horticulture or “green” industry continues to be one of the fastest growing segments of agriculture in the U.S., ranking behind only corn and soybeans in total cash receipts. The Floral and Nursery Plants Research Unit (FNPRU), of the U.S. National Arboretum, is the largest research g...

  14. National Apprenticeship and Training Standards for the Sheet Metal Industry. Revised.

    ERIC Educational Resources Information Center

    Employment and Training Administration (DOL), Washington, DC. Bureau of Apprenticeship and Training.

    These national standards are designed to aid contractors, labor, and joint committees in setting up, conducting, and improving apprenticeship programs for individuals seeking to become skilled in the sheet metal industry. Covered in the individual sections are the following topics: the provisions of the apprenticeship standards (definitions,…

  15. Regional characteristics relevant to advanced technology cogeneration development. [industrial energy

    NASA Technical Reports Server (NTRS)

    Manvi, R.

    1981-01-01

    To assist DOE in establishing research and development funding priorities in the area of advanced energy conversion technoloy, researchers at the Jet Propulsion Laboratory studied those specific factors within various regions of the country that may influence cogeneration with advanced energy conversion systems. Regional characteristics of advanced technology cogeneration possibilities are discussed, with primary emphasis given to coal derived fuels. Factors considered for the study were regional industry concentration, purchased fuel and electricity prices, environmental constraints, and other data of interest to industrial cogeneration.

  16. Industrial pollution prevention programs in selected developing Asian countries

    SciTech Connect

    Chiu, Shen-yann |

    1995-12-31

    This paper presents the information on current activities to promote industrial pollution prevention (P2) in five selected Asian economies including Hong Kong, Republic of Korea, the Philippines, ROC in Taiwan, and Thailand. These activities, generally initiated in the last 5 years, are classified into 6 categories: awareness promotion, education and training, information transfer, technology development an demonstration, technical assistance, and financial incentives. Although participation is voluntary, these programs are all important at the early stages of P2 promotion and should be useful in informing industries of the benefit of P2 and helping them identify specific P2 measures as viable environmental management alternatives.

  17. Influences of VSAT network on the economical and industrial development

    NASA Astrophysics Data System (ADS)

    Lancrenon, B.; Lorent, P.

    1990-10-01

    The adaptable, rapidly assembled and operational VSAT (very small aperature terminal) satellite network is a tool which rapidly provides essential digital infrastructure for business communication networks in order to support and stimulate the development of modern industry. A market analysis is given for VSATs, discussing such topics as applications of the product, retail and distribution, banking finance, and manufacturing industry. The centralized booking of the tourism transport sector is also investigated. The network including the earth stations, the satellite, the systems aspects, and the network management is described in detail and diagrams are provided. Some estimates of space channel cost per year are given.

  18. 78 FR 46923 - National Climate Assessment and Development Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-02

    ... National Oceanic and Atmospheric Administration National Climate Assessment and Development Advisory... the National Climate Assessment and Development Advisory Committee (NCADAC) for a period of time that is either 90 days after the government's Third National Climate Assessment is released to the...

  19. Cooperative research and development opportunities with the National Cancer Institute

    NASA Technical Reports Server (NTRS)

    Sybert, Kathleen

    1991-01-01

    The Office of Technology Development (OTD) of the National Cancer Institute (NCI) is responsible for negotiating Cooperative Research and Development Agreements (CRADAs), whereby the knowledge resulting from NCI investigators' government-sponsored research is developed in collaboration with universities and/or industry into new products of importance for the diagnosis and treatment of cancer and acquired immunodeficiency syndrome (AIDS). The NCI has recently executed a unique 'clinical trials' CRADA and is developing a model agreement based upon it for the development and commercialization of products for the diagnosis and treatment of cancer and AIDS. NCI drug screening, preclinical testing, clinical trials, and AIDS program capabilities form the basis for this new technology development/technology transfer vehicle. NCI's extensive drug screening program and 'designer foods' program serve as potential sources of investigational new drugs (INDs) and cancer preventatives. Collaborations between NCI and pharmaceutical companies having the facilities, experience, and expertise necessary to develop INDs into approved drugs available to the public are being encouraged where the companies have proprietary rights to INDs, or where NCI has proprietary rights to INDs and invites companies to respond to a collaborator announcement published in the Federal Register. The joint efforts of the NCI and the chosen collaborator are designed to generate the data necessary to obtain pharmaceutic regulatory approval from the Food and Drug Administration (FDA) to market the drugs developed, and thereby make them available to health care providers for the diagnosis and treatment of cancer and AIDS.

  20. Transnational Corporations as Educational Institutions for National Development: The Contrasting Cases of Mexico and South Korea

    ERIC Educational Resources Information Center

    Hanson, Mark

    2006-01-01

    Economic development in South Korea, Singapore, Hong Kong, Taiwan, and Ireland has accelerated dramatically since the 1960s, as it has in China more recently. These areas share a common element in their development strategies--the aggressive pursuit, acquisition, and incorporation of knowledge from industrialized nations. In this article, the…

  1. Photogrammetry in the line: recent developments in industrial photogrammetry

    NASA Astrophysics Data System (ADS)

    Boesemann, Werner

    2003-05-01

    In recent years industrial photogrammetry has emerged from a highly specialized niche technology to a well established tool in industrial coordinate measurement applications with numerous installations in a significantly growing market of flexible and portable optical measurement systems. This is due to the development of powerful, but affordable video and computer technology. The increasing industrial requirements for accuracy, speed, robustness and ease of use of these systems together with a demand for the highest possible degree of automation have forced universities and system manufacturers to develop hard- and software solutions to meet these requirements. The presentation will show the latest trends in hardware development, especially new generation digital and/or intelligent cameras, aspects of image engineering like use of controlled illumination or projection technologies,and algorithmic and software aspects like automation strategies or new camera models. The basic qualities of digital photogrammetry-like portability and flexibility on one hand and fully automated quality control on the other -- sometimes lead to certain conflicts in the design of measurement systems for different online, offline or real-time solutions. The presentation will further show, how these tools and methods are combined in different configurations to be able to cover the still growing demands of the industrial end-users.

  2. Online, offline, realtime: recent developments in industrial photogrammetry

    NASA Astrophysics Data System (ADS)

    Boesemann, Werner

    2003-01-01

    In recent years industrial photogrammetry has emerged from a highly specialized niche technology to a well established tool in industrial coordinate measurement applications with numerous installations in a significantly growing market of flexible and portable optical measurement systems. This is due to the development of powerful, but affordable video and computer technology. The increasing industrial requirements for accuracy, speed, robustness and ease of use of these systems together with a demand for the highest possible degree of automation have forced universities and system manufacturer to develop hard- and software solutions to meet these requirements. The presentation will show the latest trends in hardware development, especially new generation digital and/or intelligent cameras, aspects of image engineering like use of controlled illumination or projection technologies, and algorithmic and software aspects like automation strategies or new camera models. The basic qualities of digital photogrammetry- like portability and flexibility on one hand and fully automated quality control on the other - sometimes lead to certain conflicts in the design of measurement systems for different online, offline, or real-time solutions. The presentation will further show, how these tools and methods are combined in different configurations to be able to cover the still growing demands of the industrial end-users.

  3. International standards for the exploration and production industry -- Their development and use

    SciTech Connect

    Johansen, A.R.; Loppinet, A.; Reeve, P.T.N.; Thomas, G.A.N.; Thorp, G.; Vanzini, R.

    1995-12-01

    A single global market for procurement is of crucial importance to the E and P industry. The resulting benefits, including cost reductions and shorter delivery times, could even be the key to the economic development of marginal fields. International Standards that cater for the needs of users, manufacturers and the public at large can provide a common basis for companies to procure and provide goods and services that will deliver the required performance throughout the field life. The savings to industry could be billions of dollars per year. The E and P Forum, on behalf of the industry, has developed proposals to increase the efficiency of this managerial procedure and to speed up the ``internationalization`` of selected standards. Details are given at the end of the paper. It is argued that the E and P industry should rally to the cause of international standardization. Companies should lend their full support by committing their valuable expert resources. It is in the interests of the industry to do this for, without suitably skilled expert representation in ISO and the elimination of duplication as well as waste of resources through performing similar work at company or national level, the large potential benefits of international standardization will elude the E and P industry.

  4. Strategic imperatives for globalization of industries in developing countries: an Indian pharmaceutical industry example.

    PubMed

    Srivastava, Rajesh; Chandra, Ashish; Kumar, Girish

    2004-01-01

    The annual global pharmaceutical sales have grown over 466 billion dollars, almost 50% of which comes from North America. Among developing countries, India, with 16% of the world population, accounts for only a small percentage of the global pharmaceutical industry. Until recently, India has had virtually no pharmaceutical industry worth the name producing drugs from basic raw materials and it used to rely mostly on the imports from countries like the USA and England for all its requirements of drugs. On the other hand, India has seen a plethora of multinational pharmaceutical companies come and do business in India. This paper develops a matrix which provides a broad guidance to the mid- to large-size Indian pharmaceutical domestic companies, which should embark on the path to global expansion to establish their might as well.

  5. 2013 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site’s Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond

    SciTech Connect

    Mike Lewis

    2014-02-01

    This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (WRU-I-0160-01, formerly LA 000160 01), for the wastewater reuse site at the Idaho National Laboratory Site’s Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond from November 1, 2012 through October 31, 2013. The report contains the following information: • Facility and system description • Permit required effluent monitoring data and loading rates • Groundwater monitoring data • Status of special compliance conditions • Discussion of the facility’s environmental impacts During the 2013 reporting year, an estimated 9.64 million gallons of wastewater were discharged to the Industrial Waste Ditch and Pond which is well below the permit limit of 17 million gallons per year. The concentrations of all permit-required analytes in the samples from the down gradient monitoring wells were below the applicable Idaho Department of Environmental Quality’s groundwater quality standard levels.

  6. National Health Accounts development: lessons from Thailand.

    PubMed

    Tangcharoensathien, V; Laixuthai, A; Vasavit, J; Tantigate, N A; Prajuabmoh-Ruffolo, W; Vimolkit, D; Lertiendumrong, J

    1999-12-01

    National Health Accounts (NHA) are an important tool to demonstrate how a country's health resources are spent, on what services, and who pays for them. NHA are used by policy-makers for monitoring health expenditure patterns; policy instruments to re-orientate the pattern can then be further introduced. The National Economic and Social Development Board (NESDB) of Thailand produces aggregate health expenditure data but its estimation methods have several limitations. This has led to the research and development of an NHA prototype in 1994, through an agreed definition of health expenditure and methodology, in consultation with peer and other stakeholders. This is an initiative by local researchers without external support, with an emphasis on putting the system into place. It involves two steps: firstly, the flow of funds from ultimate sources of finance to financing agencies; and secondly, the use of funds by financing agencies. Five ultimate sources and 12 financing agencies (seven public and five private) were identified. Use of consumption expenditures was listed under four main categories and 32 sub-categories. Using 1994 figures, we estimated a total health expenditure of 128,305.11 million Baht; 84.07% consumption and 15.93% capital formation. Of total consumption expenditure, 36.14% was spent on purchasing care from public providers, with 32.35% on private providers, 5.93% on administration and 9.65% on all other public health programmes. Public sources of finance were responsible for 48.79% and private 51.21% of the total 1994 health expenditure. Total health expenditure accounted for 3.56% of GDP (consumption expenditure at 3.00% of GDP and capital formation at 0.57% of GDP). The NESDB consumption expenditure estimate in 1994 was 180,516 million Baht or 5.01% of GDP, of which private sources were dominant (82.17%) and public sources played a minor role (17.83%). The discrepancy of consumption expenditure between the two estimates is 2.01% of GDP. There

  7. Materials design and development of functional materials for industry.

    PubMed

    Asahi, Ryoji; Morikawa, Takeshi; Hazama, Hirofumi; Matsubara, Masato

    2008-02-13

    It is now well recognized that we are witnessing a golden age of innovation with novel materials, with discoveries that are important for both basic science and industry. With the development of theory along with computing power, quantum materials design-the synthesis of materials with the desired properties in a controlled way via materials engineering on the atomic scale-is becoming a major component of materials research. Computational prediction based on first-principles calculations has helped to find an efficient way to develop materials that are much needed for industry, as we have seen in the successful development of visible-light sensitized photocatalysts and thermoelectric materials. Close collaboration between theory and experiment is emphasized as an essential for success.

  8. Development of PACS Digital Pump and implications for other industries

    NASA Astrophysics Data System (ADS)

    Banister, M.; Vohnout, S.; Kenman, D.

    2007-04-01

    This paper discusses the development and system integration of the Pulse Activated Cell System (PACS) Digital Pump technology using 2 types of electro-activated polymer (EAP) actuators. This is a platform specifically developed for the integration of sensor feedback loops to create an autonomous fluidic monitoring, reaction and delivery system. Initial, proof of concept, performance testing results are discussed as well as development for a medical drug delivery device and higher volume infusion therapy device. Uses and applications of the technology in other industries is considered as the PAC System provides a new ability to pump single or multiple fluid flows in a single pump that is programmable with the ability to vary direction, pressure and flow rates. The result is digital control of fluidic delivery, testing and mixing in application scaleable product packages. This technology will lead to new low cost yet sophisticated fluidic processing products and devices for many industries.

  9. National Institute of Standards and Technology - Texas instruments industrial collaboratory testbed.

    SciTech Connect

    Postek, M. T.

    1998-10-29

    A portion of the mission of the NIST Manufacturing Engineering Laboratory (MEL) is to improve and advance length metrology in aid of U.S. Industry. This responsibility is found within the Precision Engineering Division (PED). The successful development of a ''Collaborator'' for TelePresence Microscopy provides an important new tool to promote technology transfer in the area of length metrology and measurement technology. NIST and Texas Instruments under the auspices of the National Automated Manufacturing Testbed (NAMT) and in collaboration with the University of Illinois are developing a microscopy collaborator testbed to demonstrate the value of telepresence microscopy within a large distributed manufacturing facility such as Texas Instruments and between organizations such as NET, Texas Instruments and Universities. Telepresence Microscopy is an application of the state-of-the-art Internet based technology to long-distance scientific endeavors. Long distance can refer to across the country or from one site within a company to another. Telepresence is currently being applied to electron microscopy in several locations where unique analytical facilities (such as those at NIST) can be utilized via Internet connection. Potentially this can provide tremendous savings to a company where asset sharing can now be rapidly and effectively accessed or remote unique facilities can be utilized without the requirement of expensive and time consuming travel. This methodology is not limited to electron microscopy, but its power is currently exemplified by its application to that form of microscopy.

  10. Development of engineering technology basis for industrialization of pyrometallurgical reprocessing

    SciTech Connect

    Koyama, Tadafumi; Hijikata, Takatoshi; Yokoo, Takeshi; Inoue, Tadashi

    2007-07-01

    Development of the engineering technology basis of pyrometallurgical reprocessing is a key issue for industrialization. For development of the transport technologies of molten salt and liquid cadmium at around 500 deg. C, a salt transport test rig and a metal transport test rig were installed in Ar glove box. Function of centrifugal pump and 1/2' declined tubing were confirmed with LiCl- KCl molten salt. The transport behavior of molten salt was found to follow that of water. Function of centrifugal pump, vacuum sucking and 1/2' declined tubing were confirmed with liquid Cd. With employing the transport technologies, industrialization applicable electro-refiner was newly designed and engineering-scale model was fabricated in Ar glove box. The electro-refiner has semi-continuous liquid Cd cathode instead of conventional one used in small-scale tests. With using actinide-simulating elements, demonstration of industrial-scale throughput will be carried out in this electro-refiner for more precise evaluation of industrialization potential of pyrometallurgical reprocessing. (authors)

  11. Trends and developments in industrial machine vision: 2013

    NASA Astrophysics Data System (ADS)

    Niel, Kurt; Heinzl, Christoph

    2014-03-01

    When following current advancements and implementations in the field of machine vision there seems to be no borders for future developments: Calculating power constantly increases, and new ideas are spreading and previously challenging approaches are introduced in to mass market. Within the past decades these advances have had dramatic impacts on our lives. Consumer electronics, e.g. computers or telephones, which once occupied large volumes, now fit in the palm of a hand. To note just a few examples e.g. face recognition was adopted by the consumer market, 3D capturing became cheap, due to the huge community SW-coding got easier using sophisticated development platforms. However, still there is a remaining gap between consumer and industrial applications. While the first ones have to be entertaining, the second have to be reliable. Recent studies (e.g. VDMA [1], Germany) show a moderately increasing market for machine vision in industry. Asking industry regarding their needs the main challenges for industrial machine vision are simple usage and reliability for the process, quick support, full automation, self/easy adjustment at changing process parameters, "forget it in the line". Furthermore a big challenge is to support quality control: Nowadays the operator has to accurately define the tested features for checking the probes. There is an upcoming development also to let automated machine vision applications find out essential parameters in a more abstract level (top down). In this work we focus on three current and future topics for industrial machine vision: Metrology supporting automation, quality control (inline/atline/offline) as well as visualization and analysis of datasets with steadily growing sizes. Finally the general trend of the pixel orientated towards object orientated evaluation is addressed. We do not directly address the field of robotics taking advances from machine vision. This is actually a fast changing area which is worth an own

  12. Component Manufacturing Development for the National Compact Stellarator Experiment (NCSX)

    SciTech Connect

    P.J. Heitzenroeder; T.G. Brown; J.H. Chrzanowski; M.J. Cole; P.L. Goranson; G.H. Neilson; B.E. Nelson; W.T. Reiersen; L.L Sutton; D.E. Williamson; M.E. Viola

    2004-10-28

    NCSX [National Compact Stellarator Experiment] is the first of a new class of stellarators called compact stellarators which hold the promise of retaining the steady state feature of the stellarator but at a much lower aspect ratio and using a quasi-axisymmetric magnetic field to obtain tokamak-like performance. Although much of NCSX is conventional in design and construction, the vacuum vessel and modular coils provide significant engineering challenges due to their complex shapes, need for high dimensional accuracy, and the high current density required in the modular coils due space constraints. Consequently, a three-phase development program has been undertaken. In the first phase, laboratory/industrial studies were performed during the development of the conceptual design to permit advances in manufacturing technology to be incorporated into NCSX's plans. In the second phase, full-scale prototype modular coil winding forms, compacted cable conductors, and 20 degree sectors of the vacuum vessel were fabricated in industry. In parallel, the NCSX project team undertook R&D studies that focused on the windings. The third (production) phase began in September 2004. First plasma is scheduled for January 2008.

  13. National economic models of industrial water use and waste treatment. [technology transfer

    NASA Technical Reports Server (NTRS)

    Thompson, R. G.; Calloway, J. A.

    1974-01-01

    The effects of air emission and solid waste restrictions on production costs and resource use by industry is investigated. A linear program is developed to analyze how resource use, production cost, and waste discharges in different types of production may be affected by resource limiting policies of the government. The method is applied to modeling ethylene and ammonia plants at the design stage. Results show that the effects of increasingly restrictive wastewater effluent standards on increased energy use were small in both plants. Plant models were developed for other industries and the program estimated effects of wastewater discharge policies on production costs of industry.

  14. Protein design in systems metabolic engineering for industrial strain development.

    PubMed

    Chen, Zhen; Zeng, An-Ping

    2013-05-01

    Accelerating the process of industrial bacterial host strain development, aimed at increasing productivity, generating new bio-products or utilizing alternative feedstocks, requires the integration of complementary approaches to manipulate cellular metabolism and regulatory networks. Systems metabolic engineering extends the concept of classical metabolic engineering to the systems level by incorporating the techniques used in systems biology and synthetic biology, and offers a framework for the development of the next generation of industrial strains. As one of the most useful tools of systems metabolic engineering, protein design allows us to design and optimize cellular metabolism at a molecular level. Here, we review the current strategies of protein design for engineering cellular synthetic pathways, metabolic control systems and signaling pathways, and highlight the challenges of this subfield within the context of systems metabolic engineering.

  15. US energy industry financial developments, 1993 second quarter

    SciTech Connect

    Not Available

    1993-09-29

    US Energy Industry Financial Developments, 1993 Second Quarter provides information on the financial performance of energy companies during the most recent reporting period. The data are taken from public sources such as the Wall Street Journal, Energy Information Administration publications, corporate press releases, and other public sources. Based on information provided in 1993 second quarter financial disclosures, net income for 114 petroleum companies--including 19 majors--rose 33 percent between the second quarter of 1992 and the second quarter of 1993. Both upstream (oil and gas exploration, development and production) operations and downstream (petroleum refining, marketing, and transport) contributed to the improved financial Performance of petroleum companies consolidated operations. Rate-regulated industries also showed positive income growth between the second quarter of 1992 and the second quarter of 1993 due to higher natural gas prices and increased electricity consumption.

  16. Workforce Development: A Survey of Industry Needs and Training Approaches

    SciTech Connect

    Ventre, Jerry; Weissman, Jane

    2009-04-01

    This paper presents information and data collected during 2008 on PV workforce needs by the Interstate Renewable Energy Council for the U.S. Department of Energy. The data was collected from licensed contractors, PV practitioners, educators and expert instructors at training sessions, and at focus group and advisory committee meetings. Respondents were primarily from three states: Florida, New York and California. Other states were represented, but to a lesser extent. For data collection, a 12-item questionnaire was developed that addressed key workforce development issues from the perspectives of both the PV industry and training institutions. A total of 63 responses were collected, although not every respondent answered every question. Industry representatives slightly outnumbered the educators, although the difference in responses was not significant.

  17. Development potential of e-waste recycling industry in China.

    PubMed

    Li, Jinhui; Yang, Jie; Liu, Lili

    2015-06-01

    Waste electrical and electronic equipment (WEEE or e-waste) recycling industries in China have been through several phases from spontaneous informal family workshops to qualified enterprises with treatment fund. This study attempts to analyse the development potential of the e-waste recycling industry in China from the perspective of both time and scale potential. An estimation and forecast of e-waste quantities in China shows that, the total e-waste amount reached approximately 5.5 million tonnes in 2013, with 83% of air conditioners, refrigerators, washing machines, televisions sand computers. The total quantity is expected to reach ca. 11.7 million tonnes in 2020 and 20 million tonnes in 2040, which indicates a large increase potential. Moreover, the demand for recycling processing facilities, the optimal service radius of e-waste recycling enterprises and estimation of the profitability potential of the e-waste recycling industry were analysed. Results show that, based on the e-waste collection demand, e-waste recycling enterprises therefore have a huge development potential in terms of both quantity and processing capacity, with 144 and 167 e-waste recycling facilities needed, respectively, by 2020 and 2040. In the case that e-waste recycling enterprises set up their own collection points to reduce the collection cost, the optimal collection service radius is estimated to be in the range of 173 km to 239 km. With an e-waste treatment fund subsidy, the e-waste recycling industry has a small economic profit, for example ca. US$2.5/unit for television. The annual profit for the e-waste recycling industry overall was about 90 million dollars in 2013.

  18. Development potential of e-waste recycling industry in China.

    PubMed

    Li, Jinhui; Yang, Jie; Liu, Lili

    2015-06-01

    Waste electrical and electronic equipment (WEEE or e-waste) recycling industries in China have been through several phases from spontaneous informal family workshops to qualified enterprises with treatment fund. This study attempts to analyse the development potential of the e-waste recycling industry in China from the perspective of both time and scale potential. An estimation and forecast of e-waste quantities in China shows that, the total e-waste amount reached approximately 5.5 million tonnes in 2013, with 83% of air conditioners, refrigerators, washing machines, televisions sand computers. The total quantity is expected to reach ca. 11.7 million tonnes in 2020 and 20 million tonnes in 2040, which indicates a large increase potential. Moreover, the demand for recycling processing facilities, the optimal service radius of e-waste recycling enterprises and estimation of the profitability potential of the e-waste recycling industry were analysed. Results show that, based on the e-waste collection demand, e-waste recycling enterprises therefore have a huge development potential in terms of both quantity and processing capacity, with 144 and 167 e-waste recycling facilities needed, respectively, by 2020 and 2040. In the case that e-waste recycling enterprises set up their own collection points to reduce the collection cost, the optimal collection service radius is estimated to be in the range of 173 km to 239 km. With an e-waste treatment fund subsidy, the e-waste recycling industry has a small economic profit, for example ca. US$2.5/unit for television. The annual profit for the e-waste recycling industry overall was about 90 million dollars in 2013. PMID:25990983

  19. Pursuing sustainable industrial development through the ecoindustrial parks: three case studies of China.

    PubMed

    Wang, Zhen; Shi, Lei; Hu, Dan; Xu, Yi; Sun, Dezhi

    2010-05-01

    As one branch of industrial ecology, the ecoindustrial park (EIP) concept is being accepted and implemented in many parts of the world. In order to pursue a sustainable industrial development, China's government is forging this concept into a new strategy of industrial development and regional practices. This article aims to depict a picture of current China's experiences on EIP. It first presents two stages of EIP development at national level. Then more details at individual level are provided by three cases studies, that is, Dafeng, Lubei, and Nanhai, in which three points are addressed: (1) the industrial and environmental backgrounds of EIP projects; (2) specific resource sharing; and (3) benefits and challenges in these projects. The case studies show that the government acts as a key role player, facilitating multiple functions in the development of EIP projects. The case studies also suggest that many factors including holistic, economic, social, and technical aspects need to be taken into account to develop a successful EIP project.

  20. [The development of the American carcass rendering industry (author's transl)].

    PubMed

    Cox, J S

    1980-03-01

    The American rendering organization is different from that in Europe, it has historycally developed as an industry separate from slaughter houses, it has grown and waxed very profitable on a world wide basis, and finally it is now under technological attack which may eventually fundamentally change it and make it more like the organization of rendering that you have in much of Europe after all.

  1. Federal laboratory nondestructive testing research and development applicable to industry

    SciTech Connect

    Smith, S.A.; Moore, N.L.

    1987-02-01

    This document presents the results of a survey of nondestructive testing (NDT) and related sensor technology research and development (R and D) at selected federal laboratories. Objective was to identify and characterize NDT activities that could be applied to improving energy efficiency and overall productivity in US manufacturing. Numerous federally supported R and D programs were identified in areas such as acoustic emissions, eddy current, radiography, computer tomography and ultrasonics. A Preliminary Findings Report was sent to industry representatives, which generated considerable interest.

  2. Oil industry development and trade liberalization in the Western Hemisphere

    SciTech Connect

    Randall, S.J.

    1993-12-31

    This paper provides an overview of oil industry developments in the Western Hemisphere with particular emphasis on Latin America since the inauguration of the Enterprise for the Americas Initiative by George Bush. The author discusses these developments in the context of the Canada-U.S. Free Trade Agreement (concluded in 1989), and the negotiation in 1992 of the North American Free Trade Agreement (NAFTA). This paper is concerned essentially with the oil industry and does not discuss the importance of natural gas for Canadian producers nor the fact that much of Latin American oil production (notably in Mexico) is associated with natural gas. The author examines the shift to trade and investment liberalization and privatization in the 1980s and early 1990s, especially in Latin America--where the most dramatic transformation has occurred. The author suggests that investment patterns in the industry have been only marginally related to trade liberalization, and have derived more from considerations of resource availability, exploration and development costs, market factors, and the general state of the international economy--all of which have contributed in the 1980s to significant restructuring and downsizing among a number of major corporations. The author also notes the important increase in an internal Latin American market, and the role of regional organizations such as ARPEL-the Association of Latin American State Oil Company Producers. 31 refs., 3 tabs.

  3. The NEED (National Energy Education Development) Project

    NASA Astrophysics Data System (ADS)

    Hogan, D.; Spruill, M.

    2012-04-01

    The NEED (National Energy Education Development) Project is a non-profit organization which provides a wide range of K-12 curriculum on energy education topics. The curriculum is specific for primary, elementary, intermediate and secondary levels with age appropriate activities and reading levels. The NEED Project covers a wide range of topics from wind energy, nuclear energy, solar energy, hydropower, hydrogen, fossil fuels, energy conservation, energy efficiency and much more. One of the major strengths of this organization is its Teacher Advisory Board. The curriculum is routinely revised and updated by master classroom teachers who use the lessons and serve on the advisory board. This ensures it is of the highest quality and a useful resource. The NEED Project through a variety of sponsors including businesses, utility companies and government agencies conducts hundreds of teacher professional development workshops each year throughout the United States and have even done some workshops internationally. These workshops are run by trained NEED facilitators. At the workshops, teachers gain background understanding of the energy topics and have time to complete the hands on activities which make up the curriculum. The teachers are then sent a kit of equipment after successfully completing the workshop. This allows them to teach the curriculum and have their students perform the hands on labs and activities in the classroom. The NEED Project is the largest provider of energy education related curriculum in the United States. Their efforts are educating teachers about energy topics and in turn educating students in the hope of developing citizens who are energy literate. Many of the hands on activities used to teach about various energy sources will be described and demonstrated.

  4. Development of university-industry partnerships in railroad engineering education

    NASA Astrophysics Data System (ADS)

    Lautala, Pasi T.

    to high demand for rail transportation and an older engineering workforce with the greatest demand for civil, electrical and mechanical engineers with bachelor's degrees. The rail industry and universities have grown apart over the past several decades, as rail programs and courses were abandoned at universities and there were very limited recruitment and research activities by the railroads at universities. Today, specialized course(s) in rail topics are offered at approximately three percent of ABET accredited civil engineering programs in the U.S. and only 16 percent of engineers who responded to the survey had received university exposure to rail topics. The research findings suggest that increased university participation has the potential to assist the rail industry in all aspects related to attracting, educating, recruiting, training and retaining engineering graduates. The primary advantages would be greater industry visibility and student knowledge in rail topics. Increased prior knowledge, on the other hand, improves the effectiveness of industry training programs and offers a potential for sizable training cost reductions. As a final conclusion, the research suggests that the most effective approach for developing future railroad engineers is a balancing act where the responsibilities should be shared by the rail industry and universities based on each others strengths. University participation should include multiple types and levels, including introductory lectures, co-op/internship programs, courses in railroad engineering, and a minor or certificate in railroad engineering that would include several courses. Due to the urgent demand for railroad engineers and time it takes to rebuild the expertise on campuses, the development process should begin immediately, be incremental, and utilize concepts, such as cooperation with other universities or engineer-in-residence, that reduce the demand of internal university resources. The challenges to the process

  5. A summary of truck fuel-saving measures developed with industry participation

    SciTech Connect

    Bertram, K.M.; Saricks, C.L.; Gregory, E.W. II; Moore, A.J.

    1983-09-01

    This report describes the third project undertaken by the Center for Transportation Research, Argonne National Laboratory (ANL), in a US Department of Energy program designed to develop and distribute compendiums of measures for saving transportation fuel. A matrix, or chart, of more than 60 fuel-saving measures was developed by ANL and refined with the assistance of trucking industry operators and researchers at an industry coordination meeting held in August 1982. The first two projects used similar meetings to refine matrices developed for the international maritime and US railroad industries. The consensus reached by those at the meeting was that the single most important element in a truck fuel-efficiency improvement program is the human element -- namely the development of strong motivation among truck drivers to save fuel. The role of the driver is crucial to the successful use of fuel-saving equipment and operating procedures. Identical conclusions were reached in the earlier maritime and rail meetings, thus providing a strong indication of the pervasive importance of the human element in energy-efficient transportation systems. The number and variety of changes made to the matrix are also delineated, including addition and deletion of various options and revisions of fuel-saving estimates, payback period estimates, and remarks concerning items such as the advantages, disadvantages, and cautions associated with various measures. The quality and quantity of the suggested changes demonstrate the considerable value of using a forum of industry operators and researchers to refine research data that are intended for practical application.

  6. Advanced Seal Development for Large Industrial Gas Turbines

    NASA Technical Reports Server (NTRS)

    Chupp, Raymond E.

    2006-01-01

    Efforts are in progress to develop advanced sealing for large utility industrial gas turbine engines (combustion turbines). Such seals have been under developed for some time for aero gas turbines. It is desired to transition this technology to combustion turbines. Brush seals, film riding face and circumferential seals, and other dynamic and static sealing approaches are being incorporated into gas turbines for aero applications by several engine manufacturers. These seals replace labyrinth or other seals with significantly reduced leakage rates. For utility industrial gas turbines, leakage reduction with advanced sealing can be even greater with the enormous size of the components. Challenges to transitioning technology include: extremely long operating times between overhauls; infrequent but large radial and axial excursions; difficulty in coating larger components; and maintenance, installation, and durability requirements. Advanced sealing is part of the Advanced Turbine Systems (ATS) engine development being done under a cooperative agreement between Westinghouse and the US Department of Energy, Office of Fossil Energy. Seal development focuses on various types of seals in the 501ATS engine both at dynamic and static locations. Each development includes rig testing of candidate designs and subsequent engine validation testing of prototype seals. This presentation gives an update of the ongoing ATS sealing efforts with special emphasis on brush seals.

  7. US energy industry financial developments, 1993 first quarter

    SciTech Connect

    Not Available

    1993-06-25

    Net income for 259 energy companies-- including, 20 major US petroleum companies-- rose 38 percent between the first quarter of 1992 and the first quarter of 1993. An increased level of economic activity, along with colder weather, helped lift the demand for natural gas. crude oil, coal, and electricity. The sharp rise in the domestic price of natural gas at the wellhead relative to the year-ago quarter was the most significant development in US energy during the first quarter. As a consequence of higher natural gas prices, the upstream segment of the petroleum industry reported large gains in income, while downstream income rose due to higher refined product demand. Increased economic activity and higher weather-related natural gas demand also led to improvements in income for the rate-regulated energy segment. However, declining domestic oil production continued to restrain upstream petroleum industry earnings growth, despite a moderate rise in crude oil prices.

  8. Electricity industry development trends and the environmental programs in the Czech Republic

    SciTech Connect

    Karas, P.

    1995-12-01

    The process of industrialization in the Czech Republic, which is more intensive than in other parts of central Europe, has been under way since the mid-nineteenth century. Over the last 40 years, large-scale industrial activity was based on extensive use of domestic primary energy sources, especially brown-coal/lignite. The escalation of this usage inflicted heavy devastation to large portions of industrial zones and, as a result, worsened living conditions through atmospheric pollution and other environmental impacts in large regions of central Europe. The Czech electricity industry and CEZ, a.s. (the nation`s principal electricity generator, responsible for meeting eighty percent of national electricity demand, and operator of the nationwide EHV transmission system) has been challenged to cope with all environmental issues by the end of 1997, in compliance with the strict limits set by the Clean Air Act of 1991, which are comparable to standard implemented in advanced industrial countries. A review of the critical environmental issues is presented and the role of the individual and of the State is analyzed. The approach of CEZ, a.s., towards a better natural environment and its response to legal environment provisions have been incorporated into the company`s development program. It comprises decommissioning the most obsolete fossil-fuel fired power stations; rehabilitation of thermal power plants; supplementing the coal/lignite-fired units selected for future operation with FGD systems and retrofitting them with DENOX equipment; a larger share of nuclear electricity generation after the completion of the Temelin NPP (2 units of 1000MW each) and, last but not least, initiating DSM (demand-side management) programs of energy-electricity savings in the Czech Republic.

  9. 78 FR 4132 - National Climate Assessment and Development Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-18

    ... National Oceanic and Atmospheric Administration RIN 0648-XC433 National Climate Assessment and Development... of the National Climate Assessment and Development Advisory Committee (NCADAC) to announce the availability of a Draft Climate Assessment Report for public comment. This report, following revision...

  10. Education's Role in National Development Plans: Ten Country Cases.

    ERIC Educational Resources Information Center

    Thomas, R. Murray, Ed.

    The place education has been assigned in the national development programs of 10 nations is discussed, the problems that these countries have encountered in managing education are examined, and the measures adopted to solve educational problems are assessed. Included are the following papers: (1) "The Nature of National Development Planning" (R.…

  11. Why do Developing Nations Enter the Space Field-Egypt Experience

    NASA Astrophysics Data System (ADS)

    Argoun, Mohamed

    Nations enter into the space field for reasons that are as varied as the economic and strategic goals of these nations. Medium size powers enter the space field to assert their regional supremacy, to acquire technologies and capabilities that enhances their economic competitiveness or for reasons of national security. Smaller nations (in size or economic status) want to share part of the cake of space technology benefits. Developing nations and aspiring small industrialized nations enter into the space field with their eyes on different objectives. Because of their limited financial means and tighter priorities they must ensure that the gains from Space technology for them justify the effort. The gains are generally related to development more than their relationship to economic benefits. The Space technology could have significant influence on scientific research, education and on the general level of industry in these countries. Space technology, because of its special features, can in particular, act as leverage for electronics and other high tech industries. This paper discusses the main reasons and objectives for which developing countries decide to enter into the space field. The experience of Egypt in space with the successful launch of its first remote sensing satellite Egyptsat-1 and the onward work to design and manufacture other similar satellites locally, is used as an example to illustrate the successes and problems facing such countries in their endeavors to achieve their goals.

  12. Industrial packaging developments for the global meat market.

    PubMed

    Belcher, J N

    2006-09-01

    Packaging companies must carefully monitor retail and consumer trends to best utilize, direct, or prioritize their research dollars in developing packaging and packaging systems to meet these demands. This paper reviews packaging developments that are resulting from numerous trends taking place in the meat industry and in the retail sector. Current case ready packaging solutions that meet the needs of retailers to reduce labor in the back of the retail stores, and the consumer needs for a fresh product with excellent quality and palatability are also discussed. It will also review the current packaging options that are being developed to help consumers battle their "time crunch" with ready meal solutions. Finally, the necessity to increase food safety or eliminate pathogens while producing a high quality product continues to drive packaging development. Current systems and packaging available for post packaging pasteurization will be discussed. PMID:22062723

  13. Developments to Supplant CAMAC with Industry Standard Technology at NSTX

    SciTech Connect

    Sichta, P.; Dong, J.; Marsala, R.; Oliaro, G.; Wertenbaker, J.

    2003-07-31

    NSTX, like other research programs, is facing an inevitable crisis due to end-of-life issues for its 20-year-old CAMAC instrumentation. In many cases replacement components are not available, effectively rendering a CAMAC module unusable after a failure. The proliferation of high-performance, reliable, low-cost commodity computing hardware and software based on industry standard technology can provide the basis for a new generation of instrumentation. At NSTX, there have been several advances towards developing a PCI-based model for data acquisition and control systems. New hardware developments include a High Performance Signal Conditioning board and an FPGA-based Multifunction Timing System. Extensible software interfaces have been developed to integrate these boards into the NSTX computing environment. This paper will illustrate these developments and how they could be used to benefit collaborative fusion research.

  14. QUINAULT INDIAN NATIONAL DEVELOPMENT OF TRIBAL SEAFOOD CONSUMPTION SURVEY SOFTWARE

    EPA Science Inventory

    The Quinault Indian Nation needed to determine appropriate seafood consumption rates for development of their water quality standards. EPA Region 10 and EPA's National Health and Environmental Effects Research Laboratory had been collaborating on computer assisted personal inter...

  15. Development of university-industry partnerships in railroad engineering education

    NASA Astrophysics Data System (ADS)

    Lautala, Pasi T.

    to high demand for rail transportation and an older engineering workforce with the greatest demand for civil, electrical and mechanical engineers with bachelor's degrees. The rail industry and universities have grown apart over the past several decades, as rail programs and courses were abandoned at universities and there were very limited recruitment and research activities by the railroads at universities. Today, specialized course(s) in rail topics are offered at approximately three percent of ABET accredited civil engineering programs in the U.S. and only 16 percent of engineers who responded to the survey had received university exposure to rail topics. The research findings suggest that increased university participation has the potential to assist the rail industry in all aspects related to attracting, educating, recruiting, training and retaining engineering graduates. The primary advantages would be greater industry visibility and student knowledge in rail topics. Increased prior knowledge, on the other hand, improves the effectiveness of industry training programs and offers a potential for sizable training cost reductions. As a final conclusion, the research suggests that the most effective approach for developing future railroad engineers is a balancing act where the responsibilities should be shared by the rail industry and universities based on each others strengths. University participation should include multiple types and levels, including introductory lectures, co-op/internship programs, courses in railroad engineering, and a minor or certificate in railroad engineering that would include several courses. Due to the urgent demand for railroad engineers and time it takes to rebuild the expertise on campuses, the development process should begin immediately, be incremental, and utilize concepts, such as cooperation with other universities or engineer-in-residence, that reduce the demand of internal university resources. The challenges to the process

  16. Development of industrial catalysts for sustainable chlorine production.

    PubMed

    Mondelli, Cecilia; Amrute, Amol P; Moser, Maximilian; Schmidt, Timm; Pérez-Ramírez, Javier

    2012-01-01

    The heterogeneously catalyzed gas-phase oxidation of HCl to Cl(2) offers an energy-efficient and eco- friendly route to recover chlorine from HCl-containing byproduct streams in the chemical industry. This process has attracted renewed interest in the last decade due to an increased chlorine demand and the growing excess of byproduct HCl from chlorination processes. Since its introduction (by Deacon in 1868) and till recent times, the industrialization of this reaction has been hindered by the lack of sufficiently active and durable materials. Recently, RuO(2)-based catalysts with outstanding activity and stability have been designed and they are being implemented for large-scale Cl(2) recycling. Herein, we review the main limiting features of traditional Cu-based catalysts and survey the key steps in the development of the new generation of industrial RuO(2)-based materials. As the expansion of this technology would benefit from cheaper, but comparably robust, alternatives to RuO(2)-based catalysts, a nov el CeO(2)-based catalyst which offers promising perspectives for application in this field has been introduced.

  17. Argonne National Laboratory study of the transfer of federal computational technology to manufacturing industry in the State of Michigan

    SciTech Connect

    Mueller, C.J.

    1991-11-01

    This report describes a pilot study to develop, initiate the implementation, and document a process to identify computational technology capabilities resident within Argonne National Laboratory to small and medium-sized businesses in the State of Michigan. It is a derivative of a program entitled Technology Applications Development Process for the State of Michigan'' undertaken by the Industrial Technology Institute and MERRA under funding from the National Institute of Standards and Technology. The overall objective of the latter program is to develop procedures which can facilitate the discovery and commercialization of new technologies for the benefit of small and medium-size manufacturing firms. Federal laboratories such as Argonne, along with universities, have been identified by the Industrial Technology Institute as key sources of technology which can be profitably commercialized by the target firms. The scope of this study limited the investigation of technology areas for technology transfer to that of computational science and engineering featuring high performance computing. This area was chosen as the broad technological capability within Argonne to investigate for technology transfer to Michigan firms for several reasons. First, and most importantly, as a multidisciplinary laboratory, Argonne has the full range of scientific and engineering skills needed to utilize leading-edge computing capabilities in many areas of manufacturing.

  18. Argonne National Laboratory study of the transfer of federal computational technology to manufacturing industry in the State of Michigan

    SciTech Connect

    Mueller, C.J.

    1991-11-01

    This report describes a pilot study to develop, initiate the implementation, and document a process to identify computational technology capabilities resident within Argonne National Laboratory to small and medium-sized businesses in the State of Michigan. It is a derivative of a program entitled ``Technology Applications Development Process for the State of Michigan`` undertaken by the Industrial Technology Institute and MERRA under funding from the National Institute of Standards and Technology. The overall objective of the latter program is to develop procedures which can facilitate the discovery and commercialization of new technologies for the benefit of small and medium-size manufacturing firms. Federal laboratories such as Argonne, along with universities, have been identified by the Industrial Technology Institute as key sources of technology which can be profitably commercialized by the target firms. The scope of this study limited the investigation of technology areas for technology transfer to that of computational science and engineering featuring high performance computing. This area was chosen as the broad technological capability within Argonne to investigate for technology transfer to Michigan firms for several reasons. First, and most importantly, as a multidisciplinary laboratory, Argonne has the full range of scientific and engineering skills needed to utilize leading-edge computing capabilities in many areas of manufacturing.

  19. Fungal arachidonic acid-rich oil: research, development and industrialization.

    PubMed

    Ji, Xiao-Jun; Ren, Lu-Jing; Nie, Zhi-Kui; Huang, He; Ouyang, Ping-Kai

    2014-09-01

    Fungal arachidonic acid (ARA)-rich oil is an important microbial oil that affects diverse physiological processes that impact normal health and chronic disease. In this article, the historic developments and technological achievements in fungal ARA-rich oil production in the past several years are reviewed. The biochemistry of ARA, ARA-rich oil synthesis and the accumulation mechanism are first introduced. Subsequently, the fermentation and downstream technologies are summarized. Furthermore, progress in the industrial production of ARA-rich oil is discussed. Finally, guidelines for future studies of fungal ARA-rich oil production are proposed in light of the current progress, challenges and trends in the field.

  20. CCD research and development at Lawrence Berkeley National Laboratory

    NASA Astrophysics Data System (ADS)

    Bebek, C. J.; Coles, R. A.; Denes, P.; Dion, F.; Emes, J. H.; Frost, R.; Groom, D. E.; Groulx, R.; Haque, S.; Holland, S. E.; Karcher, A.; Kolbe, W. F.; Lee, J. S.; Palaio, N. P.; Roe, N. A.; Tran, C. H.; Wang, G.

    2012-07-01

    We describe work at Lawrence Berkeley National Laboratory (LBNL) to develop enhanced performance, fully depleted, back-illuminated charge-coupled devices for astronomy and astrophysics. The CCDs are fabricated on high-resistivity substrates and are typically 200-300 μm thick for improved near-infrared response. The primary research and development areas include methods to reduce read noise, increase quantum efficiency and readout speed, and the development of fabrication methods for the efficient production of CCDs for large focal planes. In terms of noise reduction, we will describe technology developments with our industrial partner Teledyne DALSA Semiconductor to develop a buried-contact technology for reduced floating-diffusion capacitance, as well as efforts to develop ”skipper” CCDs with sub-electron noise utilizing non-destructive readout amplifiers allowing for multiple sampling of the charge packets. Improvements in quantum efficiency in the near-infrared utilizing ultra-high resistivity substrates that allow full depletion of 500 μm and thicker substrates will be described, as well as studies to improve the blue and UV sensitivity by investigating the limits on the thickness of the back-side ohmic contact layer used in the LBNL technology. Improvements in readout speed by increasing the number of readout ports will be described, including work on high frame-rate CCDs for x-ray synchrotrons with as many as 192 amplifiers per CCD. Finally, we will describe improvements in fabrication methods, developed in the course of producing over 100 science-grade 2k × 4k CCDs for the Dark Energy Survey Camera.

  1. The development of a mathematical model for technology transfer potential: A manufacturing industry case

    SciTech Connect

    Kamaluddin, L.M.

    1991-01-01

    A mathematical model was developed to measure the degree of technology in a given country or countries. The model is based on the regression analysis incorporating a taxonomic method to measure the difference of technological development within a group of countries. Simple linear regression analysis was employed to identify the independent variables showing the strongest relationship to the dependent variable. These variables were then used in controlled studies to investigate causal relationships, i.e., to identify the importance of the technological characteristics influencing the technological level. Second, the independent variables most influencing the dependent variable were selected using the all-regression procedure. Third, taxonomic analysis was employed to classify, compare, and rank the levels of technological development. The resource mathematical model was investigated for developed industrial countries, newly industrializing countries, middle-income countries, and less developing countries. Using the nation's data from the period of 1980-1986, results show that as long as the industrial countries maintain economic prosperity, they will probably continue to dominate high technology.

  2. Evaluating the military potential of a developing nation's space program: A case study of Brazil

    NASA Astrophysics Data System (ADS)

    Collins, Michael J.

    1991-09-01

    This thesis examines how and why a developing nation may use its civilian space program to acquire ballistic missiles. Using a single case study of Brazil, this analysis looks for universal patterns in space program development and for how Third World nations use their civilian space programs for military purposes. This thesis analyzes the relationship between space and missile development, the Missile Technology Control Regime, reasons for building missiles (political, economic, national security, geopolitical, need for technology), Brazilian civil-military relations, and various technologies and space systems. It identifies the critical technologies required for a successful space program; identifies the critical industries that are missing in Brazil and the technologies that it must import; highlights indicators of military intentions of a civilian space program; and evaluates how the generalizations developed throughout the thesis may be applied to other nations.

  3. Development of a process control sensor for the glass industry

    SciTech Connect

    Gardner, M.; Candee, A.; Kramlich, J.; Koppang, R.

    1991-05-01

    This project was initiated to fill a need in the glass industry for a non-contact temperature sensor for glass melts. At present, the glass forming industry (e.g., bottle manufacture) consumes significant amounts of energy. Careful control of temperature at the point the bottle is molded is necessary to prevent the bottle from being rejected as out-of-specification. In general, the entire glass melting and conditioning process is designed to minimize this rejection rate, maximize throughput and thus control energy and production costs. This program focuses on the design, development and testing of an advanced optically based pyrometer for glass melts. The pyrometer operates simultaneously at four wavelengths; through analytical treatment of the signals, internal temperature profiles within the glass melt can be resolved. A novel multiplexer alloys optical signals from a large number of fiber-optic sensors to be collected and resolved by a single detector at a location remote from the process. This results in a significant cost savings on a per measurement point basis. The development program is divided into two phases. Phase 1 involves the construction of a breadboard version on the instrument and its testing on a pilot-scale furnace. In Phase 2, a prototype analyzer will be constructed and tested on a commercial forehearth. This report covers the Phase 1 activities.

  4. Case study on partnering to revitalize development, delivery, and evaluation of education programs in optics and photonics for industry

    NASA Astrophysics Data System (ADS)

    Gaines Walker, Janice M.; Anderson, Susan A.; Harding, Kevin G.; Karakekes, Meg; Chen, Ray T.

    1997-12-01

    For the past three years, the National Alliance for Photonics Education in Manufacturing (NAPEM) has 'partnered' with industry to develop, deliver and evaluate continuing education programs on optics and photonics applied to manufacturing processes. NAPEM is an alliance of CREOL/University of Central Florida, the Industrial Technology Institute, the University of Connecticut, The University of Texas at Austin, and SPIE -- The International Society for Optical Engineering. NAPEM formed in 1994 as the result of partial funding through a U. S. Technology/Reinvestment Project/Manufacturing Education and Training grant monitored by the National Science Foundation. NAPEM targeted four applications of optics in manufacturing processes. Each of these manufacturing process corresponds to a geographical region in the United States: semiconductor manufacturing in the Southwest, durable goods manufacturing in the Midwest, laser materials processing in the North East, and optics manufacturing in the South East. Course programs were typically modular, offered in half- to full-day formats. This paper focuses on lessons learned by Alliance members in the process of fulfilling NAPEM's mission. Specifically this paper addresses: (1) Challenges and benefits of university and professional association partnerships on program development, promotion and evaluation; (2) challenges and benefits of partnering with industry on program development, evaluation and continuation; (3) the importance of developing 'learning partnerships' with human resources, engineering and technical managers from industry; (4) matching delivery mechanisms to industries' educational 'habits;' (5) challenges and solutions for addressing different industries' readiness to utilize high-technology.

  5. 76 FR 1657 - National Small Business Development Center Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-11

    ... ADMINISTRATION National Small Business Development Center Advisory Board AGENCY: U.S. Small Business... National Small Business Development Center (SBDC) Advisory Board. DATES: The meetings for the fourth... Business Development Centers. The purpose of these meetings is to discuss following issues pertaining...

  6. 78 FR 66983 - National Small Business Development Center Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-07

    ... ADMINISTRATION National Small Business Development Center Advisory Board AGENCY: U.S. Small Business... cancellation for the December 17, 2013 meeting of the National Small Business Development Center (SBDC... Small Business Development Centers. The purpose of this meeting is to discuss following...

  7. National Qualification Frameworks: Developing Research Perspectives

    ERIC Educational Resources Information Center

    Fernie, Scott; Pilcher, Nick

    2009-01-01

    Arguments for National Qualification Frameworks (NQF) are compelling. Indeed, such frameworks are now an international phenomenon. Yet, few studies take a critical perspective and challenge the broad assumptions underpinning NQF. Arguments presented in this paper attempt to open a debate within the higher education community that draws attention…

  8. Teachers' Evaluation of Professional Development in Support of National Reforms

    ERIC Educational Resources Information Center

    Gökmenoglu, Tuba; Clark, Christopher M.

    2015-01-01

    As in many other nations, the Turkish education system has undergone many significant curricular and structural reforms in the last decade. This study was designed to learn from teachers about the quality of professional development programs that were designed to support national reforms. Ten years into a period of intensive national reform,…

  9. Development program to support industrial coal gasification. Quarterly report 1

    SciTech Connect

    1982-01-15

    The Development Program to Support Industrial Coal Gasification is on schedule. The efforts have centered on collecting background information and data, planning, and getting the experimental program underway. The three principal objectives in Task I-A were accomplished. The technical literature was reviewed, the coals and binders to be employed were selected, and tests and testing equipment to be used in evaluating agglomerates were developed. The entire Erie Mining facility design was reviewed and a large portion of the fluidized-bed coal gasification plant design was completed. Much of the work in Task I will be experimental. Wafer-briquette and roll-briquette screening tests will be performed. In Task II, work on the fluidized-bed gasification plant design will be completed and work on a plant design involving entrained-flow gasifiers will be initiated.

  10. Advanced Turbine Systems Program industrial system concept development

    SciTech Connect

    Gates, S.

    1995-12-31

    Solar approached Phase II of ATS program with the goal of 50% thermal efficiency. An intercolled and recuperated gas turbine was identified as the ultimate system to meet this goal in a commercial gas turbine environment. With commercial input from detailed market studies and DOE`s ATS program, Solar redefined the company`s proposed ATS to fit both market and sponsor (DOE) requirements. Resulting optimized recuperated gas turbine will be developed in two sizes, 5 and 15 MWe. It will show a thermal efficiency of about 43%, a 23% improvement over current industrial gas turbines. Other ATS goals--emissions, RAMD (reliability, availability, maintainability, durability), cost of power--will be met or exceeded. During FY95, advanced development of key materials, combustion and component technologies proceeded to the point of acceptance for inclusion in ATS Phase III.

  11. Developing industrial-governmental-academic partnerships to address micronutrient malnutrition.

    PubMed

    Darnton-Hill, I

    1997-03-01

    Micronutrient malnutrition affects approximately 2 billion people and has a significant impact on mortality, morbidity, reproductive health, individual growth and development, and economic productivity. The World Bank has suggested that micronutrient interventions are among the most cost-effective of all health interventions. Therefore, greatly increased collaborative efforts are needed to bring about further reductions in micronutrient malnutrition. At the FAO/WHO International Conference on Nutrition, the importance of various partners in improving nutrition was recognized in the World Declaration on Nutrition and adopted unanimously by 159 governments: "Governments, academic institutions and industry should support the development of fundamental and applied research directed towards improving the scientific and technological knowledge base" for addressing malnutrition, including micronutrient malnutrition. Food-based strategies, including fortification, provide a good example.

  12. Developing an equivalent to the National Medicines Policy for medical devices.

    PubMed

    Smith, Matthew W; Faunce, Thomas A

    2009-12-01

    While Australia has enjoyed the benefits of a National Medicines Policy (NMP) for many years, there is no equivalent national policy for medical devices. This is despite an established medical device legal framework that spans multiple departments across the Australian Government. The existing NMP offers an effective and proven benchmark for the development of a national medical devices policy. The four NMP principles of industry, standards, access and use are applicable to all phases of the medical device life-cycle and align with existing medical devices policy. This article proposes that Australia's approach to medical devices stands to benefit from an equivalent whole-of-government policy.

  13. Developing an equivalent to the National Medicines Policy for medical devices.

    PubMed

    Smith, Matthew W; Faunce, Thomas A

    2009-12-01

    While Australia has enjoyed the benefits of a National Medicines Policy (NMP) for many years, there is no equivalent national policy for medical devices. This is despite an established medical device legal framework that spans multiple departments across the Australian Government. The existing NMP offers an effective and proven benchmark for the development of a national medical devices policy. The four NMP principles of industry, standards, access and use are applicable to all phases of the medical device life-cycle and align with existing medical devices policy. This article proposes that Australia's approach to medical devices stands to benefit from an equivalent whole-of-government policy. PMID:20169801

  14. Integrated design optimization research and development in an industrial environment

    NASA Technical Reports Server (NTRS)

    Kumar, V.; German, Marjorie D.; Lee, S.-J.

    1989-01-01

    An overview is given of a design optimization project that is in progress at the GE Research and Development Center for the past few years. The objective of this project is to develop a methodology and a software system for design automation and optimization of structural/mechanical components and systems. The effort focuses on research and development issues and also on optimization applications that can be related to real-life industrial design problems. The overall technical approach is based on integration of numerical optimization techniques, finite element methods, CAE and software engineering, and artificial intelligence/expert systems (AI/ES) concepts. The role of each of these engineering technologies in the development of a unified design methodology is illustrated. A software system DESIGN-OPT has been developed for both size and shape optimization of structural components subjected to static as well as dynamic loadings. By integrating this software with an automatic mesh generator, a geometric modeler and an attribute specification computer code, a software module SHAPE-OPT has been developed for shape optimization. Details of these software packages together with their applications to some 2- and 3-dimensional design problems are described.

  15. Nanotechnology research and development for military and industrial applications

    NASA Astrophysics Data System (ADS)

    Ruffin, Paul B.; Brantley, Christina L.; Edwards, Eugene; Roberts, J. Keith; Chew, William; Warren, Larry C.; Ashley, Paul R.; Everitt, Henry O.; Webster, Eric; Foreman, John V.; Sanghadasa, Mohan; Crutcher, Sihon H.; Temmen, Mark G.; Varadan, Vijay; Hayduke, Devlin; Wu, Pae C.; Khoury, Christopher G.; Yang, Yang; Kim, Tong-Ho; Vo-Dinh, Tuan; Brown, April S.; Callahan, John

    2011-04-01

    Researchers at the Army Aviation and Missile Research, Development, and Engineering Center (AMRDEC) have initiated multidiscipline efforts to develop nano-based structures and components for insertion into advanced missile, aviation, and autonomous air and ground systems. The objective of the research is to exploit unique phenomena for the development of novel technology to enhance warfighter capabilities and produce precision weapons. The key technology areas that the authors are exploring include nano-based microsensors, nano-energetics, nano-batteries, nano-composites, and nano-plasmonics. By integrating nano-based devices, structures, and materials into weaponry, the Army can revolutionize existing (and future) missile systems by significantly reducing the size, weight and cost. The major research thrust areas include the development of chemical sensors to detect rocket motor off-gassing and toxic industrial chemicals; the development of highly sensitive/selective, self-powered miniaturized acoustic sensors for battlefield surveillance and reconnaissance; the development of a minimum signature solid propellant with increased ballistic and physical properties that meet insensitive munitions requirements; the development of nano-structured material for higher voltage thermal batteries and higher energy density storage; the development of advanced composite materials that provide high frequency damping for inertial measurement units' packaging; and the development of metallic nanostructures for ultraviolet surface enhanced Raman spectroscopy. The current status of the overall AMRDEC Nanotechnology research efforts is disclosed in this paper. Critical technical challenges, for the various technologies, are presented. The authors' approach for overcoming technical barriers and achieving required performance is also discussed. Finally, the roadmap for each technology, as well as the overall program, is presented.

  16. Industrial Doctoral Students as Brokers between Industry and Academia: Factors Affecting Their Trajectories, Learning at the Boundaries and Identity Development

    ERIC Educational Resources Information Center

    Wallgren, Lillemor; Dahlgren, Lars Owe

    2007-01-01

    The authors look at the learning context for 23 industrial doctoral students and assess the prerequisites for the development of their identity as researchers. The students are located in three different industrial research schools--Management, Medical Bioinformatics and Building and Indoor Climate. The purpose of the study is to describe the…

  17. National Survey of Training Services to Business and Industry through Vocational Education.

    ERIC Educational Resources Information Center

    Edwards, William A.; Schmutzler, Mark

    This project was conducted to describe state programs of economic development concerned with state-provided training for industry and to share the results among the states. Surveys were sent to the 50 state directors of vocational education plus the directors in the District of Columbia, Guam, Puerto Rico, and the Virgin Islands. Of the surveys…

  18. Industry Update: the latest developments in therapeutic delivery.

    PubMed

    Steinbach, Oliver C

    2014-05-01

    The present Industry Update covers the period 1-28 February 2014, with information sourced from company press releases, regulatory and patent agencies, as well as the scientific literature. February is traditionally the month of annual reports - looking back and looking forward, hence a number of market reports on past, present and future developments in drug delivery were released. An increased trend in deal making for targeted drug delivery, as in 2013, will continue to drive partnerships in 2014. In 2013, the number of drug delivery deals inked in the healthcare industry stood at close to 400 and added up to US$2.3 billion. Closer collaboration or acquisition of drug delivery specialists by 'big pharma' are observed, such as Lupin and Nanomi, Teva and NuPathe, and Novo Nordisk and Zosano Pharma. Alternatively, one can see exclusive intellectual property or distribution rights deals such as MNG Pharma with Samyang Biopharmaceutical or Songry with a USA-based university. A few regulatory delays due to rejection (IntelGenx and Durect) joined the usually reported approvals, and iontophoresis was favorably re-evaluated in a recent US FDA hearing. A number of publications have proven that the sophistication and miniaturization of drug-delivery devices (inner-ear delivery) and particles (triggered supraparamagnetic and 'sticky' particles) is moving further at an ever faster pace.

  19. Health care financing in Korea: private market dilemmas for a developing nation.

    PubMed

    Flynn, M L; Chung, Y S

    1990-01-01

    Health insurance in developing nations has tended to widen rather than reduce the gulf between privileged and underprivileged and between urban and rural dwellers. Beneficiaries are typically urban industrial workers with regular jobs and adequate incomes. The case of health insurance implementation and health policy planning in Korea is of particular interest. It illustrates the dilemmas which arise out of a privatized model with decentralized administration and fragmented governmental responsibility in a rapidly industralizing economy. In this respect, Korean health care institutions and financing patterns reflect major influences from Japan, the United States, and Germany. Since 1976, when national health insurance was first implemented in Korea, problems in cost inflation, overspecialization of physicians, underutilization of hospital facilities, and maldistribution of health care resources have emerged. The consequences of waste and poor allocation in a developing nation are more severe than in developed nations and raise questions about the appropriate role of the public sector where conflicts between social welfare and economic objectives arise.

  20. Strategic factors in the development of the National Technology Transfer Network

    NASA Technical Reports Server (NTRS)

    Root, Jonathan F.; Stone, Barbara A.

    1993-01-01

    Broad consensus among industry and government leaders has developed over the last decade on the importance of applying the U.S. leadership in research and development (R&D) to strengthen competitiveness in the global marketplace, and thus enhance national prosperity. This consensus has emerged against the backdrop of increasing economic competition, and the dramatic reduction of military threats to national security with the end of the Cold War. This paper reviews the key factors and considerations that shaped - and continue to influence - the development of the Regional Technoloty Transfer Centers (RTTC) and the National Technology Transfer Center (NTTC). Also, the future role of the national network in support of emerging technology policy initiatives will be explored.

  1. Developing Successful Employees: Perceptions of Industry Leaders and Academicians.

    ERIC Educational Resources Information Center

    Nicholson, Amanda; Cushman, Linda

    2000-01-01

    Needed skills and qualities of retailing employees were ranked by 11 faculty and 12 industry representatives. Industry leaders believed leadership and decision making were most important for future leaders. Faculty ranked interpersonal and cognitive skills higher, and they believed their rankings would match those of industry. (SK)

  2. Role of the developing nations in the development and optimal use of space technology

    NASA Technical Reports Server (NTRS)

    Pena, M. S.

    1982-01-01

    The economic and social factors are discussed which play a role in the advancement of space technology in developing nations. It is concluded that mutual collaboration between developed and developing nations is the basic element which will allow developing nations to take part in space experiments and research.

  3. Development of an industrial CO2 laser for mask marking

    NASA Astrophysics Data System (ADS)

    Kim, Cheol Jung; Jung, Chin Mann; Kim, Jeong Mook; Kim, Kwang Suk; Kwon, Seong Ouk; Lee, Sang Mock; Kim, Duk Hyun

    1992-06-01

    We developed and commercialized an industrial pulsed TEA CO2 laser with high power and high repetition rate for printing characters and figures. Several commercial models have been investigated in design and performance. We improved its quality to the level of commercial TEA CO2 laser by an endurance test for each parts of laser system. The maximum pulse energy and repetition rate of our laser were above 5 J/pulse and 20 pps, respectively. Moreover, we designed the resolving power could be possible to 10 line/mm. Many optical parts were localized and lowered much in cost. Only few parts were imported and almost 90% in cost were localized. Also, to accelerate the commercialization by the joint company, the training and transfer of technology were pursued in the joint participation in design and assembly by company researchers from the early stage.

  4. Skill Development of Plant Operators in the Chemical Industry

    NASA Astrophysics Data System (ADS)

    Sakata, Kouichi

    In the chemical industry, most of the chemical products are manufactured by operating equipment and changing raw materials chemically and physically. Knowledge and skills regarding the raw materials and the products are required to manufacture the products of good quality safely. Furthermore the knowledge and skills concerning the chemical process, the equipment and other treated materials are needed to operate plant appropriately. The way of plant operation partially depends on the type of process such as continuous process and batch process. As a plant operator is promoted to an upper position, required to improve one's skills. To operate plant safely, the base action to prevent an error of judgment, and the adaptive action based on the rule and principle i.e. KNOW-WHY are also required. In this paper, it reports on some cases of the skill development of plant operators in Omuta Works.

  5. Recent Developments of Magnetoresistive Sensors for Industrial Applications

    PubMed Central

    Jogschies, Lisa; Klaas, Daniel; Kruppe, Rahel; Rittinger, Johannes; Taptimthong, Piriya; Wienecke, Anja; Rissing, Lutz; Wurz, Marc Christopher

    2015-01-01

    The research and development in the field of magnetoresistive sensors has played an important role in the last few decades. Here, the authors give an introduction to the fundamentals of the anisotropic magnetoresistive (AMR) and the giant magnetoresistive (GMR) effect as well as an overview of various types of sensors in industrial applications. In addition, the authors present their recent work in this field, ranging from sensor systems fabricated on traditional substrate materials like silicon (Si), over new fabrication techniques for magnetoresistive sensors on flexible substrates for special applications, e.g., a flexible write head for component integrated data storage, micro-stamping of sensors on arbitrary surfaces or three dimensional sensing under extreme conditions (restricted mounting space in motor air gap, high temperatures during geothermal drilling). PMID:26569263

  6. Recent Developments of Magnetoresistive Sensors for Industrial Applications.

    PubMed

    Jogschies, Lisa; Klaas, Daniel; Kruppe, Rahel; Rittinger, Johannes; Taptimthong, Piriya; Wienecke, Anja; Rissing, Lutz; Wurz, Marc Christopher

    2015-11-12

    The research and development in the field of magnetoresistive sensors has played an important role in the last few decades. Here, the authors give an introduction to the fundamentals of the anisotropic magnetoresistive (AMR) and the giant magnetoresistive (GMR) effect as well as an overview of various types of sensors in industrial applications. In addition, the authors present their recent work in this field, ranging from sensor systems fabricated on traditional substrate materials like silicon (Si), over new fabrication techniques for magnetoresistive sensors on flexible substrates for special applications, e.g., a flexible write head for component integrated data storage, micro-stamping of sensors on arbitrary surfaces or three dimensional sensing under extreme conditions (restricted mounting space in motor air gap, high temperatures during geothermal drilling).

  7. 78 FR 23622 - National Small Business Development Center Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-19

    ... From the Federal Register Online via the Government Publishing Office SMALL BUSINESS ADMINISTRATION National Small Business Development Center Advisory Board AGENCY: U.S. Small Business... National Small Business Development Center (SBDC) Advisory Board. DATES: The meetings for the 3rd...

  8. 76 FR 41320 - National Small Business Development Center Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-13

    ... From the Federal Register Online via the Government Publishing Office SMALL BUSINESS ADMINISTRATION National Small Business Development Center Advisory Board AGENCY: U.S. Small Business... National Small Business Development Center (SBDC) Advisory Board. DATES: The meetings for the 4th...

  9. DEVELOPING A QUALITY SYSTEM FOR THE NATIONAL CHILDREN'S STUDY

    EPA Science Inventory

    A Quality Management Plan (QMP) is under development for a national, interagency, long-term study known as the National Children's Study (NCS). The NCS is a study to examine the effects of environmental influences on the health and development of more than 100,000 children acros...

  10. Recent developments in abortion law in industrialized countries.

    PubMed

    Boland, R

    1990-01-01

    An effort to bring new insights into the US abortion debate, this article reviews recent legal developments concerning abortion in 7 other industrialized countries. In addition to the US, the author examines developments in Canada, England, Ireland, France, Belgium, Romania, and Bulgaria. In the US, the Supreme Court has become the battleground for an increasingly bitter abortion debate. The 1989 ruling in Webster v. Reproductive Health Services has setback the 1973 Roe v. Wade ruling which guaranteed a woman's right to an abortion. Although the Webster did not overturn Roe, it did significantly weaken the trimester approach to abortion regulation and open the door to further restrictions. In Canada, however, the court has overturned a previously burdensome abortion law. The abortion debate in England has centered around the standard that says that an abortion may not take place when the fetus is "capable of being born alive." Conforming to present scientific knowledge, English law now allows abortions on demand during the 1st 12 weeks of pregnancy -- bringing England closer to the practice of other European countries. Belgium has also recently approved of unimpeded abortions during the 1st 12 weeks. In France, the governments has ordered the manufacturer of RU486 to make the abortifacient available to French women. Ireland, however, remains the only industrialized country in the world where abortion is still illegal. The cases of Bulgaria and Romania show what can happen when abortion becomes the pawn of social policy and ideology. Romania is the extreme case. Prior to his downfall in 1989, President Ceaucescu had instituted one of the most restrictive abortion laws as part of a pronatalist policy. This resulted in widespread misery for women and created a great number of unwanted children, which the author warns is the result of restrictive abortions laws.

  11. 26 CFR 5c.103-2 - Leases and industrial development bonds.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 26 Internal Revenue 14 2011-04-01 2010-04-01 true Leases and industrial development bonds. 5c.103....103-2 Leases and industrial development bonds. For purposes of section 103(b)(2), the determination of whether an obligation constitutes an industrial development bond shall be made without regard to...

  12. 26 CFR 5c.103-2 - Leases and industrial development bonds.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 26 Internal Revenue 14 2012-04-01 2012-04-01 false Leases and industrial development bonds. 5c.103....103-2 Leases and industrial development bonds. For purposes of section 103(b)(2), the determination of whether an obligation constitutes an industrial development bond shall be made without regard to...

  13. 26 CFR 5c.103-2 - Leases and industrial development bonds.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 26 Internal Revenue 14 2014-04-01 2013-04-01 true Leases and industrial development bonds. 5c.103....103-2 Leases and industrial development bonds. For purposes of section 103(b)(2), the determination of whether an obligation constitutes an industrial development bond shall be made without regard to...

  14. 26 CFR 5c.103-2 - Leases and industrial development bonds.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Leases and industrial development bonds. 5c.103....103-2 Leases and industrial development bonds. For purposes of section 103(b)(2), the determination of whether an obligation constitutes an industrial development bond shall be made without regard to...

  15. 26 CFR 5c.103-2 - Leases and industrial development bonds.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 26 Internal Revenue 14 2013-04-01 2013-04-01 false Leases and industrial development bonds. 5c.103....103-2 Leases and industrial development bonds. For purposes of section 103(b)(2), the determination of whether an obligation constitutes an industrial development bond shall be made without regard to...

  16. 26 CFR 5f.103-2 - Public approval of industrial development bonds.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 26 Internal Revenue 14 2012-04-01 2012-04-01 false Public approval of industrial development bonds... RESPONSIBILITY ACT OF 1982 § 5f.103-2 Public approval of industrial development bonds. (a) General rule. An industrial development bond (within the meaning of § 1.103-7(b)(1) issued after December 31, 1982, shall...

  17. 26 CFR 5f.103-2 - Public approval of industrial development bonds.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 26 Internal Revenue 14 2014-04-01 2013-04-01 true Public approval of industrial development bonds... RESPONSIBILITY ACT OF 1982 § 5f.103-2 Public approval of industrial development bonds. (a) General rule. An industrial development bond (within the meaning of § 1.103-7(b)(1) issued after December 31, 1982, shall...

  18. 26 CFR 5f.103-2 - Public approval of industrial development bonds.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 26 Internal Revenue 14 2013-04-01 2013-04-01 false Public approval of industrial development bonds... RESPONSIBILITY ACT OF 1982 § 5f.103-2 Public approval of industrial development bonds. (a) General rule. An industrial development bond (within the meaning of § 1.103-7(b)(1) issued after December 31, 1982, shall...

  19. National Skills Assessment of the U.S. Wind Industry in 2012

    SciTech Connect

    Levanthal, M.; Tegen, S.

    2013-06-01

    A robust workforce is essential to developing domestic wind power projects, including manufacturing, siting, operations, maintenance, and research capabilities. The purpose of our research is to better understand today's domestic wind workforce, projected workforce needs as the industry grows, and how existing and new programs can meet the wind industry's future education and training needs. Results presented in this report provide the first published investigation into the detailed makeup of the wind energy workforce, educational infrastructure and training needs of the wind industry. Insights from this research into the domestic wind workforce will allow the private sector, educational institutions, and federal and state governmental organizations to make workforce-related decisions based on the current employment and training data and future projections in this report.

  20. Perspectives on collaboration and infrastructure development: industry perspectives.

    PubMed

    Knaak, J B

    1995-09-01

    Industry continues to promote the use of sound science in regulatory decision making. The use of decision support methodologies for hazard identification/risk assessment of toxic substances such as models employing physiologically based pharmacokinetics (PBPK) and structure-activity relationships (SAR) are recommended. A collaborative program involving government and industry is needed to further the use of these decision support methodologies. The formation of federal and state working groups is recommended. Organizations such as the Halogenated Solvents Industrial Alliance (HSIA), American Industrial Health Council (AIHC), and the Chemical Manufacturers Association (CMA) are suitable industry representatives. PMID:7570671

  1. The potential for industrial cogeneration development by 1990

    NASA Astrophysics Data System (ADS)

    1981-07-01

    The cogeneration study focused on five industries that constitute three quarters of industrial steam demand: pulp and paper, chemicals, petroleum refining, steel, and food processing. These industries use almost one fifth of the total energy consumed in the United States. The analysis reflected the investment and regulatory concerns in the United States. The analysis reflected the investment used by industrial and utility managers. Phone discussions were held with approximately 70 companies to verify and augment the process and energy use data for the five industries.

  2. Development of standard test methods for unmanned and manned industrial vehicles used near humans

    NASA Astrophysics Data System (ADS)

    Bostelman, Roger; Norcross, Richard; Falco, Joe; Marvel, Jeremy

    2013-05-01

    The National Institute of Standards and Technology (NIST) has been researching human-robot-vehicle collaborative environments for automated guided vehicles (AGVs) and manned forklifts. Safety of AGVs and manned vehicles with automated functions (e.g., forklifts that slow/stop automatically in hazardous situations) are the focus of the American National Standards Institute/Industrial Truck Safety Development Foundation (ANSI/ITSDF) B56.5 safety standard. Recently, the NIST Mobile Autonomous Vehicle Obstacle Detection/Avoidance (MAVODA) Project began researching test methods to detect humans or other obstacles entering the vehicle's path. This causes potential safety hazards in manufacturing facilities where both line-of-sight and non-line-of-sight conditions are prevalent. The test methods described in this paper address both of these conditions. These methods will provide the B56.5 committee with the measurement science basis for sensing systems - both non-contact and contact - that may be used in manufacturing facilities.

  3. Target salt 2025: a global overview of national programs to encourage the food industry to reduce salt in foods.

    PubMed

    Webster, Jacqui; Trieu, Kathy; Dunford, Elizabeth; Hawkes, Corinna

    2014-08-01

    Reducing population salt intake has been identified as a priority intervention to reduce non-communicable diseases. Member States of the World Health Organization have agreed to a global target of a 30% reduction in salt intake by 2025. In countries where most salt consumed is from processed foods, programs to engage the food industry to reduce salt in products are being developed. This paper provides a comprehensive overview of national initiatives to encourage the food industry to reduce salt. A systematic review of the literature was supplemented by key informant questionnaires to inform categorization of the initiatives. Fifty nine food industry salt reduction programs were identified. Thirty eight countries had targets for salt levels in foods and nine countries had introduced legislation for some products. South Africa and Argentina have both introduced legislation limiting salt levels across a broad range of foods. Seventeen countries reported reductions in salt levels in foods-the majority in bread. While these trends represent progress, many countries have yet to initiate work in this area, others are at early stages of implementation and further monitoring is required to assess progress towards achieving the global target.

  4. Target Salt 2025: A Global Overview of National Programs to Encourage the Food Industry to Reduce Salt in Foods

    PubMed Central

    Webster, Jacqui; Trieu, Kathy; Dunford, Elizabeth; Hawkes, Corinna

    2014-01-01

    Reducing population salt intake has been identified as a priority intervention to reduce non-communicable diseases. Member States of the World Health Organization have agreed to a global target of a 30% reduction in salt intake by 2025. In countries where most salt consumed is from processed foods, programs to engage the food industry to reduce salt in products are being developed. This paper provides a comprehensive overview of national initiatives to encourage the food industry to reduce salt. A systematic review of the literature was supplemented by key informant questionnaires to inform categorization of the initiatives. Fifty nine food industry salt reduction programs were identified. Thirty eight countries had targets for salt levels in foods and nine countries had introduced legislation for some products. South Africa and Argentina have both introduced legislation limiting salt levels across a broad range of foods. Seventeen countries reported reductions in salt levels in foods—the majority in bread. While these trends represent progress, many countries have yet to initiate work in this area, others are at early stages of implementation and further monitoring is required to assess progress towards achieving the global target. PMID:25195640

  5. Taurine and fish development: insights for the aquaculture industry.

    PubMed

    Pinto, Wilson; Rønnestad, Ivar; Dinis, Maria Teresa; Aragão, Cláudia

    2013-01-01

    Expansion of the aquaculture industry is limited by incomplete knowledge on fish larval nutritional requirements. Nevertheless, it is believed that dietary taurine deficiencies may be particularly critical for fish larvae. The reasons include the high taurine levels found during egg and yolk-sac stages of fish, suggesting that taurine may be of pivotal importance for larval development. Moreover, unlike aquaculture feeds, natural preys of fish larvae contain high taurine levels, and dietary taurine supplementation has been shown to increase larval growth in several fish species. This study aimed to further explore the physiological role of taurine during fish development. Firstly, the effect of dietary taurine supplementation was assessed on growth of gilthead sea bream (Sparus aurata) larvae and growth, metamorphosis success and amino acid metabolism of Senegalese sole (Solea senegalensis) larvae. Secondly, the expression of taurine transporter (TauT) was characterised by qPCR in sole larvae and juveniles. Results showed that dietary taurine supplementation did not increase sea bream growth. However, dietary taurine supplementation significantly increased sole larval growth, metamorphosis success and amino acid retention. Metamorphosis was also shown to be an important developmental trigger to promote taurine transport in sole tissues, while evidence for an enterohepatic recycling pathway for taurine was found in sole at least from juvenile stage. Taken together, our studies showed that the dependence of dietary taurine supplementation differs among fish species and that taurine has a vital role during the ontogenetic development of flatfish, an extremely valuable group targeted for aquaculture production.

  6. Taurine and fish development: insights for the aquaculture industry.

    PubMed

    Pinto, Wilson; Rønnestad, Ivar; Dinis, Maria Teresa; Aragão, Cláudia

    2013-01-01

    Expansion of the aquaculture industry is limited by incomplete knowledge on fish larval nutritional requirements. Nevertheless, it is believed that dietary taurine deficiencies may be particularly critical for fish larvae. The reasons include the high taurine levels found during egg and yolk-sac stages of fish, suggesting that taurine may be of pivotal importance for larval development. Moreover, unlike aquaculture feeds, natural preys of fish larvae contain high taurine levels, and dietary taurine supplementation has been shown to increase larval growth in several fish species. This study aimed to further explore the physiological role of taurine during fish development. Firstly, the effect of dietary taurine supplementation was assessed on growth of gilthead sea bream (Sparus aurata) larvae and growth, metamorphosis success and amino acid metabolism of Senegalese sole (Solea senegalensis) larvae. Secondly, the expression of taurine transporter (TauT) was characterised by qPCR in sole larvae and juveniles. Results showed that dietary taurine supplementation did not increase sea bream growth. However, dietary taurine supplementation significantly increased sole larval growth, metamorphosis success and amino acid retention. Metamorphosis was also shown to be an important developmental trigger to promote taurine transport in sole tissues, while evidence for an enterohepatic recycling pathway for taurine was found in sole at least from juvenile stage. Taken together, our studies showed that the dependence of dietary taurine supplementation differs among fish species and that taurine has a vital role during the ontogenetic development of flatfish, an extremely valuable group targeted for aquaculture production. PMID:23392894

  7. The plant breeding industry after pure line theory: Lessons from the National Institute of Agricultural Botany.

    PubMed

    Berry, Dominic

    2014-06-01

    In the early twentieth century, Wilhelm Johannsen proposed his pure line theory and the genotype/phenotype distinction, work that is prized as one of the most important founding contributions to genetics and Mendelian plant breeding. Most historians have already concluded that pure line theory did not change breeding practices directly. Instead, breeding became more orderly as a consequence of pure line theory, which structured breeding programmes and eliminated external heritable influences. This incremental change then explains how and why the large multi-national seed companies that we know today were created; pure lines invited standardisation and economies of scale that the latter were designed to exploit. Rather than focus on breeding practice, this paper examines the plant varietal market itself. It focusses upon work conducted by the National Institute of Agricultural Botany (NIAB) during the interwar years, and in doing so demonstrates that, on the contrary, the pure line was actually only partially accepted by the industry. Moreover, claims that contradicted the logic of the pure line were not merely tolerated by the agricultural geneticists affiliated with NIAB, but were acknowledged and legitimised by them. The history of how and why the plant breeding industry was transformed remains to be written. PMID:24650856

  8. The plant breeding industry after pure line theory: Lessons from the National Institute of Agricultural Botany.

    PubMed

    Berry, Dominic

    2014-06-01

    In the early twentieth century, Wilhelm Johannsen proposed his pure line theory and the genotype/phenotype distinction, work that is prized as one of the most important founding contributions to genetics and Mendelian plant breeding. Most historians have already concluded that pure line theory did not change breeding practices directly. Instead, breeding became more orderly as a consequence of pure line theory, which structured breeding programmes and eliminated external heritable influences. This incremental change then explains how and why the large multi-national seed companies that we know today were created; pure lines invited standardisation and economies of scale that the latter were designed to exploit. Rather than focus on breeding practice, this paper examines the plant varietal market itself. It focusses upon work conducted by the National Institute of Agricultural Botany (NIAB) during the interwar years, and in doing so demonstrates that, on the contrary, the pure line was actually only partially accepted by the industry. Moreover, claims that contradicted the logic of the pure line were not merely tolerated by the agricultural geneticists affiliated with NIAB, but were acknowledged and legitimised by them. The history of how and why the plant breeding industry was transformed remains to be written.

  9. 63. Mobile Learning in Developing Nations

    ERIC Educational Resources Information Center

    Motlik, Scott

    2008-01-01

    This paper looks at the diffusion and applications of mobile phone technology in Asia and Africa, compared with North America. It indicates that Asian distance education can be the global leader in the development of educational uses for the mobile phone; and it considers the potential for mobile learning in Africa and other developing regions.…

  10. Developments in the use of Bacillus species for industrial production.

    PubMed

    Schallmey, Marcus; Singh, Ajay; Ward, Owen P

    2004-01-01

    Bacillus species continue to be dominant bacterial workhorses in microbial fermentations. Bacillus subtilis (natto) is the key microbial participant in the ongoing production of the soya-based traditional natto fermentation, and some Bacillus species are on the Food and Drug Administration's GRAS (generally regarded as safe) list. The capacity of selected Bacillus strains to produce and secrete large quantities (20-25 g/L) of extracellular enzymes has placed them among the most important industrial enzyme producers. The ability of different species to ferment in the acid, neutral, and alkaline pH ranges, combined with the presence of thermophiles in the genus, has lead to the development of a variety of new commercial enzyme products with the desired temperature, pH activity, and stability properties to address a variety of specific applications. Classical mutation and (or) selection techniques, together with advanced cloning and protein engineering strategies, have been exploited to develop these products. Efforts to produce and secrete high yields of foreign recombinant proteins in Bacillus hosts initially appeared to be hampered by the degradation of the products by the host proteases. Recent studies have revealed that the slow folding of heterologous proteins at the membrane-cell wall interface of Gram-positive bacteria renders them vulnerable to attack by wall-associated proteases. In addition, the presence of thiol-disulphide oxidoreductases in B. subtilis may be beneficial in the secretion of disulphide-bond-containing proteins. Such developments from our understanding of the complex protein translocation machinery of Gram-positive bacteria should allow the resolution of current secretion challenges and make Bacillus species preeminent hosts for heterologous protein production. Bacillus strains have also been developed and engineered as industrial producers of nucleotides, the vitamin riboflavin, the flavor agent ribose, and the supplement poly

  11. Overview of Sandia National Laboratories and Antenna Development Department

    SciTech Connect

    Brock, B.C.

    1994-04-01

    Sandia is a multiprogram R & D laboratory. It has responsibilities in the following areas: (1) defense programs; (2) energy and environment; and (3) work for others (DOD, NSA, etc.). In 1989, the National Competitiveness Technology Transfer Act added another responsibility -- contributions to industrial competitiveness. Sandia has two major laboratory locations, New Mexico and California, and two flight testing locations, Tonopah Test Range, Nevada and Kauai Test Facility, Hawaii. The last part of this talk was dedicated to antenna research at Sandia.

  12. Career Planning: Developing the Nation's Primary Resource.

    ERIC Educational Resources Information Center

    Jarvis, Phillip S.

    1995-01-01

    Argues for intensive and ongoing career planning assistance for all age groups to ensure the development of people resources to meet Canada's economic needs. Points out the economic consequences of inadequate planning. (LKS)

  13. Assessment of industry needs for oil shale research and development

    SciTech Connect

    Hackworth, J.H.

    1987-05-01

    Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry's view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

  14. Cubesats: Cost-effective science and technology platforms for emerging and developing nations

    NASA Astrophysics Data System (ADS)

    Woellert, Kirk; Ehrenfreund, Pascale; Ricco, Antonio J.; Hertzfeld, Henry

    2011-02-01

    The development, operation, and analysis of data from cubesats can promote science education and spur technology utilization in emerging and developing nations. This platform offers uniquely low construction and launch costs together with a comparative ubiquity of launch providers; factors that have led more than 80 universities and several emerging nations to develop programs in this field. Their small size and weight enables cubesats to “piggyback” on rocket launches and accompany orbiters travelling to Moon and Mars. It is envisaged that constellations of cubesats will be used for larger science missions. We present a brief history, technology overview, and summary of applications in science and industry for these small satellites. Cubesat technical success stories are offered along with a summary of pitfalls and challenges encountered in both developed and emerging nations. A discussion of economic and public policy issues aims to facilitate the decision-making process for those considering utilization of this unique technology.

  15. Limits of industrialization in the less-developed world: Bolivia

    SciTech Connect

    Eckstein, S.; Hagopian, F.

    1983-10-01

    This article examines structural conditions impeding industrialization in underdeveloped countries. Bolivia provides an especially valuable case for study because it is one of the few countries that experienced a revolution in which a new political group committed to diversifying and expanding the economy was ushered into power. The first section of this paper discusses alternative theses of industrial underdevelopment. Subsequent sections assess the extent to which each thesis helps explain industrial patterns in Bolivia since 1952. 70 references, 4 tables.

  16. Job Creation through Economic Development: The Role of Private Industry Councils. Private Industry Council Guide Number 2.

    ERIC Educational Resources Information Center

    National Alliance of Business, Inc., Washington, DC.

    Designed specifically for private industry councils (PICs), this guide introduces the subject of economic development and job creation and highlights the impact PICs can make through carefully chosen involvement in local economic development efforts. Chapter 1 provides an introduction to economic development: What it is; how it is related to…

  17. US energy industry financial developments, 1993 third quarter

    SciTech Connect

    Not Available

    1993-12-01

    Based on information provided in 1993 third quarter financial disclosures, the average net income for 112 petroleum companies -- including 18 majors -- rose 13 percent between the third quarter of 1992 and the third quarter of 1993. The gain in overall petroleum income was derived from increases in refined product consumption and margins, which improved the profitability of downstream petroleum (refining, marketing and transport) operations. A 17-percent decline in crude oil prices led to reduced income for upstream (oil and gas exploration, development and production) operations. A 16-percent rise in natural gas wellhead prices only partially offset the negative effects of low crude oil prices. Electric utilities also reported improved financial results for the third quarter of 1993 as hotter summer temperatures relative to the year-earlier quarter helped boost air conditioning demand and overall electricity usage. The following points highlight third-quarter energy industry financial developments: (1) Refined product demand and margins lift downstream earnings. Petroleum product consumption rose 2 percent between the third quarter of 1992 and the third quarter of 1993. Although petroleum product prices declined in the most recent reporting period, they did not decline as much as crude oil input prices. As a consequence, refined product margins widened. (2) Lower crude oil prices reduce upstream earnings. Crude oil prices fell 17 percent between the third quarter of 1992 and the third quarter of 1993 leading to a substantial reduction in income for the major petroleum companies` upstream operations. (3) Drilling income rises with increased North American exploratory activity.

  18. Development and evaluation of a Workpiece Temperature Analyzer for industrial furnaces: Concept development and technical evaluation

    SciTech Connect

    Roman, G.W.; Berthold, J.W.

    1990-09-01

    The Babcock Wilcox Company (B W) was contracted by the United States Department of Energy (DOE) to perform Phase 1 of a Research Development (R D) program on a Workpiece Temperature Analyzer (WPTA) System for Industrial Furnaces. The objective of the Phase 1 effort was to develop, evaluate and recommend concepts for measuring the internal temperature of steel workpieces undergoing processing within an industrial furnace. In addition, the Phase 1 effort was to determine the economic benefits which would be derived from such a system and the steel industry's interest in the commercial availability of a WPTA. This initial Phase 1 effort then could be used to determine the desirability of pursuing this concept through Phase 2 development and laboratory testing, and Phase 3 prototype construction and field testing. This phased approach allows GO/NO/GO decisions to be made at each step along the way and assures optimum use of available funds. The end goal of the entire program is the development of a commercial product whose use would result in a significant monetary benefit to the industry in terms of cost savings resulting from reduced energy use, reduced material loss, reduced manhours per ton of finished product and potentially other benefits such as improved product quality. 37 refs., 27 figs., 5 tabs.

  19. Commercial development of space - A national commitment

    NASA Technical Reports Server (NTRS)

    Rose, James T.; Stone, Barbara A.

    1989-01-01

    The United States is currently in a unique position. It has all the assets required to lead the world in commercial space development. It has the transportation: the Shuttle and a family of expendable launch vehicles. Space Station Freedom is forthcoming. It has the extrepreneurial spirit, coupled with a strong university system and lending institutions with financial capacity necessary for entrepreneurial activities. But, there are a number of actions that the government should take to improve the climate and prospects for greater commercial development of space. This paper outlines some of the steps that NASA is taking to incentivize the private sector to apply its resources and talents to commercial space endeavors.

  20. 77 FR 20794 - National Climate Assessment and Development Advisory Committee (NCADAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-06

    ... National Oceanic and Atmospheric Administration National Climate Assessment and Development Advisory... announces the selection of the authors for the report of the next National Climate Assessment by the National Climate Assessment and Development Advisory Committee (NCADAC). The next National...

  1. Industry Volunteers in the Classroom. Freeing Teachers' Time for Professional Development.

    ERIC Educational Resources Information Center

    Education Development Center, Inc., Newton, MA.

    This handbook describes a model for providing professional development time for teachers by matching them up with volunteers from local industries who regularly replace them in the classroom. This industry volunteer model offers a way for business and industry to support professional development for local classroom teachers by contributing a…

  2. Response to the National Career Development Strategy Green Paper

    ERIC Educational Resources Information Center

    Australian Journal of Career Development, 2012

    2012-01-01

    The Career Development Association of Australia (CDAA) congratulates the Commonwealth Government on the development of the National Career Development Strategy Green Paper. This is a timely and important document that provides a framework to demonstrate the central contribution that career development services play in supporting individuals,…

  3. Current radar responsive tag development activities at Sandia National Laboratories.

    SciTech Connect

    Plummer, Kenneth W.; Ormesher, Richard C.

    2003-09-01

    Over the past ten years, Sandia has developed RF radar responsive tag systems and supporting technologies for various government agencies and industry partners. RF tags can function as RF transmitters or radar transponders that enable tagging, tracking, and location determination functions. Expertise in tag architecture, microwave and radar design, signal analysis and processing techniques, digital design, modeling and simulation, and testing have been directly applicable to these tag programs. In general, the radar responsive tag designs have emphasized low power, small package size, and the ability to be detected by the radar at long ranges. Recently, there has been an interest in using radar responsive tags for Blue Force tracking and Combat ID (CID). The main reason for this interest is to allow airborne surveillance radars to easily distinguish U.S. assets from those of opposing forces. A Blue Force tracking capability would add materially to situational awareness. Combat ID is also an issue, as evidenced by the fact that approximately one-quarter of all U.S. casualties in the Gulf War took the form of ground troops killed by friendly fire. Because the evolution of warfare in the intervening decade has made asymmetric warfare the norm rather than the exception, swarming engagements in which U.S. forces will be freely intermixed with opposing forces is a situation that must be anticipated. Increasing utilization of precision munitions can be expected to drive fires progressively closer to engaged allied troops at times when visual de-confliction is not an option. In view of these trends, it becomes increasingly important that U.S. ground forces have a widely proliferated all-weather radar responsive tag that communicates to all-weather surveillance. The purpose of this paper is to provide an overview of the recent, current, and future radar responsive research and development activities at Sandia National Laboratories that support both the Blue Force Tracking

  4. Developing Design and Management Skills for Senior Industrial Engineering Students

    ERIC Educational Resources Information Center

    Urbanic, R. J.

    2011-01-01

    In Canadian engineering institutions, a significant design experience must occur in the final year of study. In the Department of Industrial and Manufacturing Systems at the University of Windsor, unsolved, open ended projects sponsored by industrial partners from a variety of sectors are provided to the student teams in order for them to apply…

  5. Black Vocational Technical and Industrial Arts Education: Development and History.

    ERIC Educational Resources Information Center

    Hall, Clyde W.

    Since coverage of the history of industrial training of blacks in the United States is lacking, the author has compiled a single volume tracing this history from the plantation era. All phases are described--early schools prior to 1865, private and public industrial institutions of higher education, private institutions of higher education…

  6. Assessment of pre-competitive research and development needs for industrial waste minimization

    SciTech Connect

    Young, J.K.; Fassbender, L.L. ); Sen, R.K. and Associates, Washington, DC )

    1992-02-01

    This report summarizes the findings of the first phase of a study undertaken to define a role for the Advanced Industrial Concepts (AIC) Division of the Office of Industrial Technologies (OIT) in developing waste minimization technologies for the industrial sector. The report describes the results of an industrial waste characterization based mainly on the US Environmental Protection Agency's (EPA's) 1989 Toxics Release Inventory (TRI) database. IN addition, it contains the results of interviews with personnel from trade associations, environmental advocacy groups, federal agencies, and industrial firms regarding pre-competitive research and development needs for industrial waste minimization. Recommendations for future AIC waste minimization activities are provided.

  7. Assessment of pre-competitive research and development needs for industrial waste minimization

    SciTech Connect

    Young, J.K.; Fassbender, L.L.; Sen, R.K.

    1992-02-01

    This report summarizes the findings of the first phase of a study undertaken to define a role for the Advanced Industrial Concepts (AIC) Division of the Office of Industrial Technologies (OIT) in developing waste minimization technologies for the industrial sector. The report describes the results of an industrial waste characterization based mainly on the US Environmental Protection Agency`s (EPA`s) 1989 Toxics Release Inventory (TRI) database. IN addition, it contains the results of interviews with personnel from trade associations, environmental advocacy groups, federal agencies, and industrial firms regarding pre-competitive research and development needs for industrial waste minimization. Recommendations for future AIC waste minimization activities are provided.

  8. 78 FR 32667 - Draft Guidance for Industry on Rheumatoid Arthritis: Developing Drug Products for Treatment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-31

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Draft Guidance for Industry on Rheumatoid Arthritis... guidance for industry entitled ``Rheumatoid Arthritis: Developing Drug Products for Treatment.''...

  9. Private Industry Councils Partner to Meet the Challenge of Change in Workforce Development.

    ERIC Educational Resources Information Center

    Knight, Robert

    1998-01-01

    Discusses the shift in function of PICs (Private Industry Councils) from overseeing training programs for unemployed workers to developing the skills of the entire work force in local communities. Analyzes the relationship between community colleges and Private Industry Councils. (JDI)

  10. The Development and Industrialization Recommendation of Current Aerial Remote Sensing Technology

    NASA Astrophysics Data System (ADS)

    Hong, Z.

    2013-07-01

    At present, the research development and industrialization of aerial remote sensing technology in China are faced with enormous requirements and developing chance. It is the strategic selection for remote sensing technology to perfect the construction of remote sensing technology system, implement the three strategies of science and technology development, standardize and improve the producing ability of remote sensing products, and make the remote sensing technology become a kind of industries. Based on industry economics principle and the characteristics of aerial remote sensing technology, this paper put forward the suggestions on technological development, industrialization, and market competition of aerial remote sensing industrialization.

  11. Health Update: Development of New National Child Care Health Standards.

    ERIC Educational Resources Information Center

    Aronson, Susan S.

    1988-01-01

    Discusses the absence of national standards which are uniformly applicable to health, safety, sanitation, and nutrition aspects of child care programs. Explains the responsive collaborative project of the American Academy of Pediatrics and American Public Health Association to develop national reference standards for out-of-home child care…

  12. Professional Development in National Organizations: Insights from Girls Incorporated

    ERIC Educational Resources Information Center

    Nicholson, Heather Johnston; Houchin, Susan; Stegall, Brenda

    2004-01-01

    Whether staff members are working in urban, rural, or suburban branches, for many years national organizations have been committed to preparing them to work effectively with young people. Over the past couple of decades, national organizations have sought and received strong funding to develop targeted, comprehensive professional development…

  13. Strategies for sustainable development of industrial park in Ulsan, South Korea--from spontaneous evolution to systematic expansion of industrial symbiosis.

    PubMed

    Park, Hung-Suck; Rene, Eldon R; Choi, Soo-Mi; Chiu, Anthony S F

    2008-04-01

    The Korea National Cleaner Production Center (KNCPC) affiliated to the Korea Institute of Industrial Technology (KITECH) has started a 15 year, 3-phase EIP master plan with the support of Ministry of Commerce, Industry, and Energy (MOCIE). A total of 6 industrial parks, including industrial parks in Ulsan city, known as the industrial capital of South Korea, are planning projects to find the feasibility of shifting existing industrial parks to eco-industrial parks. The basic survey shows that Ulsan industrial complex has been continuously evolving from conventional industrial complexes to eco-industrial parks by spontaneous industrial symbiosis. This paper describes the Korean national policies and the developmental activities of this vision to drive the global trend of innovation for converting the existing industrial parks to eco-industrial parks through inter-industry waste, energy, and material exchange in Ulsan Industrial complexes. In addition, the primary and supportive components of the Ulsan EIP pilot project, which will be implemented for 5 years is elaborated with its schedules and economic benefits.

  14. Pathfinder radar development at Sandia National Laboratories

    NASA Astrophysics Data System (ADS)

    Castillo, Steven

    2016-05-01

    Since the invention of Synthetic Aperture Radar imaging in the 1950's, users or potential users have sought to exploit SAR imagery for a variety of applications including the earth sciences and defense. At Sandia Laboratories, SAR Research and Development and associated defense applications grew out of the nuclear weapons program in the 1980's and over the years has become a highly viable ISR sensor for a variety of tactical applications. Sandia SAR systems excel where real-­-time, high-­-resolution, all-­-weather, day or night surveillance is required for developing situational awareness. This presentation will discuss the various aspects of Sandia's airborne ISR capability with respect to issues related to current operational success as well as the future direction of the capability as Sandia seeks to improve the SAR capability it delivers into multiple mission scenarios. Issues discussed include fundamental radar capabilities, advanced exploitation techniques and human-­-computer interface (HMI) challenges that are part of the advances required to maintain Sandia's ability to continue to support ever changing and demanding mission challenges.

  15. Developing a national salt reduction strategy for Mongolia

    PubMed Central

    Enkhtungalag, Batsaikhan; Batjargal, Jamayan; Chimedsuren, Ochir; Tsogzolmaa, Bayandorj; Anderson, Craig S.

    2015-01-01

    Background The increase in prevalence of risk factors such as hypertension has contributed to an incremental rise in non-communicable diseases (NCDs) in Mongolia over recent decades, such that they now account for 80% of all deaths in the country. Salt reduction is one of the most cost-effective interventions to reduce the burden of NCDs. Methods In 2011, the Ministry of Health (MOH) instigated the development of a national salt reduction strategy for Mongolia. As part of a 2-week national consultation and training program on salt reduction, it established an inter-sectoral working party and organized a series of bilateral meetings and visits to factories. Actions arising included a baseline survey of population salt consumption patterns and the implementation of a series of pilot salt reduction initiatives. Results The results of the baseline assessment revealed that average daily intake of salt, based on 24 hour urine samples from a representative national sample (n=1,027), was 11.06±5.99 g in 2011, more than double the World Health Organization (WHO) five grams recommendation. Moreover, while most participants knew that salt was bad for health, few were taking efforts to reduce intake, and many were consuming highly salty meals and tea; salt in tea alone was estimated to contribute 30% of daily salt intake. A pilot Pinch Salt intervention to reduce salt consumption of factory workers was undertaken in Ulaanbaatar (UB) city between 2012 and 2013, and was associated with a reduction of 2.8 g of salt intake. Ongoing food industry initiatives have led to significant reductions in salt levels in bread, and companies producing processed meat have indicated a willingness to reduce salt. Relevant stakeholders have also supported the campaign by participating in annual World Salt Awareness Week events. The activities to date have demonstrated the potential for action and there is now a need scale these up to a national level to ensure that Mongolia is in a strong

  16. Sickness absence in the private sector of Greece: comparing shipyard industry and national insurance data.

    PubMed

    Alexopoulos, Evangelos C; Merekoulias, Georgios; Tanagra, Dimitra; Konstantinou, Eleni C; Mikelatou, Efi; Jelastopulu, Eleni

    2012-04-01

    Approximately 3% of employees are absent from work due to illness daily in Europe, while in some countries sickness absence exceeds 20 days per year. Based on a limited body of reliable studies, Greek employees in the private sector seem to be absent far less frequently (<5 days/year) compared to most of the industrialized world. The aim of this study was to estimate the levels of sickness absence in the private sector in Greece, using shipyard and national insurance data. Detailed data on absenteeism of employees in a large shipyard company during the period 1999-2006 were utilized. National data on compensated days due to sickness absence concerning all employees (around 2 million) insured by the Social Insurance Institute (IKA, the largest insurance scheme in Greece) were retrieved from the Institute's annual statistical reports for the period 1987-2006. Sick-leave days per employee and sick-leave rate (%) were calculated, among other indicators. In the shipyard cohort, the employment time loss due to sick leave was 1%. The mean number of sick-leave days per employee in shipyards ranged between 4.6 and 8.7 and sick-leave rate (sickness absenteeism rate) varied among 2% and 3.7%. The corresponding indicators for IKA were estimated between 5 and 6.3 sick-leave days per insured employee (median 5.8), and 2.14-2.72% (median 2.49%), respectively. Short sick-leave spells (<4 days) may account at least for the 25% of the total number of sick-leave days, currently not recorded in national statistics. The level of sickness absence in the private sector in Greece was found to be higher than the suggested by previous reports and international comparative studies, but still remains one of the lowest in the industrialized world. In the 20-years national data, the results also showed a 7-year wave in sickness absence indexes (a decrease during the period 1991-1997 and an increase in 1998-2004) combined with a small yet significant decline as a general trend. These

  17. Sickness Absence in the Private Sector of Greece: Comparing Shipyard Industry and National Insurance Data

    PubMed Central

    Alexopoulos, Evangelos C.; Merekoulias, Georgios; Tanagra, Dimitra; Konstantinou, Eleni C.; Mikelatou, Efi; Jelastopulu, Eleni

    2012-01-01

    Approximately 3% of employees are absent from work due to illness daily in Europe, while in some countries sickness absence exceeds 20 days per year. Based on a limited body of reliable studies, Greek employees in the private sector seem to be absent far less frequently (<5 days/year) compared to most of the industrialized world. The aim of this study was to estimate the levels of sickness absence in the private sector in Greece, using shipyard and national insurance data. Detailed data on absenteeism of employees in a large shipyard company during the period 1999–2006 were utilized. National data on compensated days due to sickness absence concerning all employees (around 2 million) insured by the Social Insurance Institute (IKA, the largest insurance scheme in Greece) were retrieved from the Institute’s annual statistical reports for the period 1987–2006. Sick-leave days per employee and sick-leave rate (%) were calculated, among other indicators. In the shipyard cohort, the employment time loss due to sick leave was 1%. The mean number of sick-leave days per employee in shipyards ranged between 4.6 and 8.7 and sick-leave rate (sickness absenteeism rate) varied among 2% and 3.7%. The corresponding indicators for IKA were estimated between 5 and 6.3 sick-leave days per insured employee (median 5.8), and 2.14–2.72% (median 2.49%), respectively. Short sick-leave spells (<4 days) may account at least for the 25% of the total number of sick-leave days, currently not recorded in national statistics. The level of sickness absence in the private sector in Greece was found to be higher than the suggested by previous reports and international comparative studies, but still remains one of the lowest in the industrialized world. In the 20-years national data, the results also showed a 7-year wave in sickness absence indexes (a decrease during the period 1991–1997 and an increase in 1998–2004) combined with a small yet significant decline as a general trend. These

  18. Sickness absence in the private sector of Greece: comparing shipyard industry and national insurance data.

    PubMed

    Alexopoulos, Evangelos C; Merekoulias, Georgios; Tanagra, Dimitra; Konstantinou, Eleni C; Mikelatou, Efi; Jelastopulu, Eleni

    2012-04-01

    Approximately 3% of employees are absent from work due to illness daily in Europe, while in some countries sickness absence exceeds 20 days per year. Based on a limited body of reliable studies, Greek employees in the private sector seem to be absent far less frequently (<5 days/year) compared to most of the industrialized world. The aim of this study was to estimate the levels of sickness absence in the private sector in Greece, using shipyard and national insurance data. Detailed data on absenteeism of employees in a large shipyard company during the period 1999-2006 were utilized. National data on compensated days due to sickness absence concerning all employees (around 2 million) insured by the Social Insurance Institute (IKA, the largest insurance scheme in Greece) were retrieved from the Institute's annual statistical reports for the period 1987-2006. Sick-leave days per employee and sick-leave rate (%) were calculated, among other indicators. In the shipyard cohort, the employment time loss due to sick leave was 1%. The mean number of sick-leave days per employee in shipyards ranged between 4.6 and 8.7 and sick-leave rate (sickness absenteeism rate) varied among 2% and 3.7%. The corresponding indicators for IKA were estimated between 5 and 6.3 sick-leave days per insured employee (median 5.8), and 2.14-2.72% (median 2.49%), respectively. Short sick-leave spells (<4 days) may account at least for the 25% of the total number of sick-leave days, currently not recorded in national statistics. The level of sickness absence in the private sector in Greece was found to be higher than the suggested by previous reports and international comparative studies, but still remains one of the lowest in the industrialized world. In the 20-years national data, the results also showed a 7-year wave in sickness absence indexes (a decrease during the period 1991-1997 and an increase in 1998-2004) combined with a small yet significant decline as a general trend. These

  19. Development of Antimicrobial Peptide Prediction Tool for Aquaculture Industries.

    PubMed

    Gautam, Aditi; Sharma, Asuda; Jaiswal, Sarika; Fatma, Samar; Arora, Vasu; Iquebal, M A; Nandi, S; Sundaray, J K; Jayasankar, P; Rai, Anil; Kumar, Dinesh

    2016-09-01

    Microbial diseases in fish, plant, animal and human are rising constantly; thus, discovery of their antidote is imperative. The use of antibiotic in aquaculture further compounds the problem by development of resistance and consequent consumer health risk by bio-magnification. Antimicrobial peptides (AMPs) have been highly promising as natural alternative to chemical antibiotics. Though AMPs are molecules of innate immune defense of all advance eukaryotic organisms, fish being heavily dependent on their innate immune defense has been a good source of AMPs with much wider applicability. Machine learning-based prediction method using wet laboratory-validated fish AMP can accelerate the AMP discovery using available fish genomic and proteomic data. Earlier AMP prediction servers are based on multi-phyla/species data, and we report here the world's first AMP prediction server in fishes. It is freely accessible at http://webapp.cabgrid.res.in/fishamp/ . A total of 151 AMPs related to fish collected from various databases and published literature were taken for this study. For model development and prediction, N-terminus residues, C-terminus residues and full sequences were considered. Best models were with kernels polynomial-2, linear and radial basis function with accuracy of 97, 99 and 97 %, respectively. We found that performance of support vector machine-based models is superior to artificial neural network. This in silico approach can drastically reduce the time and cost of AMP discovery. This accelerated discovery of lead AMP molecules having potential wider applications in diverse area like fish and human health as substitute of antibiotics, immunomodulator, antitumor, vaccine adjuvant and inactivator, and also for packaged food can be of much importance for industries.

  20. Development of Antimicrobial Peptide Prediction Tool for Aquaculture Industries.

    PubMed

    Gautam, Aditi; Sharma, Asuda; Jaiswal, Sarika; Fatma, Samar; Arora, Vasu; Iquebal, M A; Nandi, S; Sundaray, J K; Jayasankar, P; Rai, Anil; Kumar, Dinesh

    2016-09-01

    Microbial diseases in fish, plant, animal and human are rising constantly; thus, discovery of their antidote is imperative. The use of antibiotic in aquaculture further compounds the problem by development of resistance and consequent consumer health risk by bio-magnification. Antimicrobial peptides (AMPs) have been highly promising as natural alternative to chemical antibiotics. Though AMPs are molecules of innate immune defense of all advance eukaryotic organisms, fish being heavily dependent on their innate immune defense has been a good source of AMPs with much wider applicability. Machine learning-based prediction method using wet laboratory-validated fish AMP can accelerate the AMP discovery using available fish genomic and proteomic data. Earlier AMP prediction servers are based on multi-phyla/species data, and we report here the world's first AMP prediction server in fishes. It is freely accessible at http://webapp.cabgrid.res.in/fishamp/ . A total of 151 AMPs related to fish collected from various databases and published literature were taken for this study. For model development and prediction, N-terminus residues, C-terminus residues and full sequences were considered. Best models were with kernels polynomial-2, linear and radial basis function with accuracy of 97, 99 and 97 %, respectively. We found that performance of support vector machine-based models is superior to artificial neural network. This in silico approach can drastically reduce the time and cost of AMP discovery. This accelerated discovery of lead AMP molecules having potential wider applications in diverse area like fish and human health as substitute of antibiotics, immunomodulator, antitumor, vaccine adjuvant and inactivator, and also for packaged food can be of much importance for industries. PMID:27141850

  1. [The economic-industrial health care complex and the social and economic dimension of development].

    PubMed

    Gadelha, Carlos Augusto Grabois; Costa, Laís Silveira; Maldonado, José

    2012-12-01

    The strategic role of health care in the national development agenda has been increasingly recognized and institutionalized. In addition to its importance as a structuring element of the Social Welfare State, health care plays a leading role in the generation of innovation - an essential element for competitiveness in knowledge society. However, health care's productive basis is still fragile, and this negatively affects both the universal provision of health care services and Brazil's competitive inclusion in the globalized environment. This situation suggests the need of a more systematic analysis of the complex relationships among productive, technological and social interests in the scope of health care. Consequently, it is necessary to produce further knowledge about the Economic-Industrial Health Care Complex due to its potential for contributing to a socially inclusive development model. This means reversing the hierarchy between economic and social interests in the sanitary field, thus minimizing the vulnerability of the Brazilian health care policy.

  2. Scientific Information Transfer and National Development in Africa.

    ERIC Educational Resources Information Center

    Adimorah, E. N. O.

    1978-01-01

    Examines the potential of scientific information transfer in selected English- and Arab-speaking countries of Africa, as it relates to national development through socio-economic planning, agriculture, medicine, and science and technology. (Author/CWM)

  3. High-temperature superconductor applications development at Argonne National Laboratory

    SciTech Connect

    Hull, J.R.; Poeppel, R.B.

    1992-02-09

    Developments at Argonne National Laboratory of near and intermediate term applications using high-temperature superconductors are discussed. Near-term applications of liquid-nitrogen depth sensors, current leads, and magnetic bearings are discussed in detail.

  4. 76 FR 52377 - National Small Business Development Center Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-22

    ... Update. --International Expansion. --Use of Social Media. --Member Roundtable. FOR FURTHER INFORMATION... From the Federal Register Online via the Government Publishing Office SMALL BUSINESS ADMINISTRATION National Small Business Development Center Advisory Board AGENCY: U.S. Small...

  5. Roadmap for a National Wildland Fire Research and Development Program

    SciTech Connect

    Wagoner, R; Bradley, M M; Lin, R R

    2003-02-01

    Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and the National Center for Atmospheric Research have formed a partnership to facilitate an innovative National Wildfire Research and Development Program. The ultimate purpose of the program will be to establish a deeper scientific understanding of the physics of fire than currently exists, to establish a solid scientific basis for strategic planning and policy making, and to develop and implement a set of advanced, scientifically based decision-making tools for the wildfire management community. The three main components of the program will be wildfire science, societal impacts, and operational applications. Smoke management, prescribed burns, wildfire mitigation and fuels assessment will be cross-cutting themes. We anticipate that this multidisciplinary, interagency program will bridge organizational and institutional barriers, and will be highly collaborative with numerous organizations and agencies, including other national laboratories; universities: federal, state, and county fire agencies; the Environmental Protection Agency; the Federal Emergency Management Agency; and the Western Governor's Association.

  6. 77 FR 64492 - National Climate Assessment and Development Advisory Committee (NCADAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-22

    ... National Oceanic and Atmospheric Administration National Climate Assessment and Development Advisory...: Notice is hereby given cancelling the DoC NOAA National Climate Assessment and Development Advisory.... SUPPLEMENTARY INFORMATION: The National Climate Assessment and Development Advisory Committee was established...

  7. Higher Education, Democracy, and Development: Implications for Newly Industrialized Countries.

    ERIC Educational Resources Information Center

    Altbach, Philip G.

    1992-01-01

    Discusses the university's role in emerging economies of the Pacific Rim's Newly Industrialized Countries, noting that universities are central to educating people for technologically oriented societies, providing a voice to emerging democracies. (SM)

  8. Cybersecurity Strategy in Developing Nations: A Jamaica Case Study

    ERIC Educational Resources Information Center

    Newmeyer, Kevin Patrick

    2014-01-01

    Developing nations have been slow to develop and implement cybersecurity strategies despite a growing threat to governance and public security arising from an increased dependency on Internet-connected systems in the developing world and rising cybercrime. Using a neorealist theoretical framework that draws from Gilpin and Waltz, this qualitative…

  9. Highlights of the National Workshop for Community Resource Development Leaders.

    ERIC Educational Resources Information Center

    Extension Service (USDA), Washington, DC.

    The first National Workshop for Community Resource Development Leaders was held in Washington, D.C., March 9-11, 1971. This report on the conference highlights the presentations of four speakers: (1) "The Road Ahead in Rural Development," by Henry L. Ahlgrens; (2) "Extension Emphasis in Rural Development," by Edwin L. Kirby; (3) "Summary of Group…

  10. First Nations Development Institute Biennial Report, 1994/95.

    ERIC Educational Resources Information Center

    First Nations Development Inst., Fredericksburg, VA.

    This report describes economic development projects that were funded during 1994-95 by the First Nations Development Institute. The Institute was established in 1980 to help tribes build sound, sustainable reservation economies. Through the Eagle Staff Fund, the Institute regrants funds for culturally viable economic development projects from a…

  11. 75 FR 24781 - Task Force on Space Industry Workforce and Economic Development

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-06

    ...#0;#0; #0; #0;Title 3-- #0;The President ] Memorandum of May 3, 2010 Task Force on Space Industry... Business Administration the Administrator of the National Aeronautics and Space Administration the Chair of... National Aeronautics and Space Administration's (NASA) budget over the next 5 years, this strategy...

  12. Skills and Enterprise: A Challenge To Further Education and Industry. An Agenda for Action Resulting from the FEDA, NTO National Council and DTI Consultative Conference Held on 2 September 1999.

    ERIC Educational Resources Information Center

    Hughes, Maria

    This publication presents materials synthesized from a consultative seminar jointly sponsored by Britain's Department of Trade and Industry (DTI), the National Training Organisations (NTO) National Council, and the Further Education Development Agency (FEDA) in Britain. The seminar's aims were: to examine the business case for investing in…

  13. Global climate change policy issues related to the movement of industry from developed to rapidly industrializing countries

    SciTech Connect

    Lesperance, A.M.; Waltemath, L.A.

    1990-10-01

    Global climate change policies adopted by developed countries may encourage industries to move to countries with less restrictive policies. The purpose of this study is to identify policy-driven issues that may result in such a movement. This report (1) summarizes the conclusions of previous studies that have explored the relationship between environmental regulations and industrial movement, (2) identifies and summarizes existing and proposed US global climate change policy options, and (3) discusses issues and topics relating to possible industrial relocation because of the global climate change policy options. It concludes with recommendations for further research. Although federal global climate change policy options are the primary focus of this report, some international and regional efforts addressing this issue are also included. A potential regional industrial migration issue is highlighted. 14 refs., 2 figs., 3 tabs.

  14. Guidelines for Industrial Arts in Career Education: Implications for Curriculum Development and Program Implementation.

    ERIC Educational Resources Information Center

    Pittsburgh Univ., PA. Dept. of Vocational Education.

    This document has been published by an ad-hoc committee with the purpose of guiding the development of industrial arts activities as an element of career education. The relationship of industrial arts education to career education and the scope and sequence of industrial arts activities within this relationship are discussed. The integration of…

  15. 48 CFR 52.234-1 - Industrial Resources Developed Under Defense Production Act Title III.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false Industrial Resources... CLAUSES Text of Provisions and Clauses 52.234-1 Industrial Resources Developed Under Defense Production Act Title III. As prescribed at 34.104, insert the following clause: Industrial Resources...

  16. 48 CFR 52.234-1 - Industrial Resources Developed Under Defense Production Act Title III.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 2 2013-10-01 2013-10-01 false Industrial Resources... CLAUSES Text of Provisions and Clauses 52.234-1 Industrial Resources Developed Under Defense Production Act Title III. As prescribed at 34.104, insert the following clause: Industrial Resources...

  17. 48 CFR 52.234-1 - Industrial Resources Developed Under Defense Production Act Title III.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Industrial Resources... CLAUSES Text of Provisions and Clauses 52.234-1 Industrial Resources Developed Under Defense Production Act Title III. As prescribed at 34.104, insert the following clause: Industrial Resources...

  18. 48 CFR 52.234-1 - Industrial Resources Developed Under Defense Production Act Title III.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 2 2012-10-01 2012-10-01 false Industrial Resources... CLAUSES Text of Provisions and Clauses 52.234-1 Industrial Resources Developed Under Defense Production Act Title III. As prescribed at 34.104, insert the following clause: Industrial Resources...

  19. 48 CFR 52.234-1 - Industrial Resources Developed Under Defense Production Act Title III.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 2 2014-10-01 2014-10-01 false Industrial Resources... CLAUSES Text of Provisions and Clauses 52.234-1 Industrial Resources Developed Under Defense Production Act Title III. As prescribed at 34.104, insert the following clause: Industrial Resources...

  20. Development of a national sport event risk management training program for college command groups.

    PubMed

    Hall, Stacey A

    2013-01-01

    The US Department of Homeland Security identified college sport venues as terrorist targets due to the potential for mass casualties and catastrophic social and economic impact. Therefore, it is critical for college sport safety and security personnel to implement effective risk management practices. However, deficiencies have been identified in the level of preparedness of college sport event security personnel related to risk management training and effective emergency response capabilities. To address the industry need, the National Center for Spectator Sports Safety and Security designed, developed, and evaluated a national sport event risk management training program for National Collegiate Athletic Association command groups. The purpose of this article was to provide an overview of the design, development, and evaluation process.

  1. Development of a national sport event risk management training program for college command groups.

    PubMed

    Hall, Stacey A

    2013-01-01

    The US Department of Homeland Security identified college sport venues as terrorist targets due to the potential for mass casualties and catastrophic social and economic impact. Therefore, it is critical for college sport safety and security personnel to implement effective risk management practices. However, deficiencies have been identified in the level of preparedness of college sport event security personnel related to risk management training and effective emergency response capabilities. To address the industry need, the National Center for Spectator Sports Safety and Security designed, developed, and evaluated a national sport event risk management training program for National Collegiate Athletic Association command groups. The purpose of this article was to provide an overview of the design, development, and evaluation process. PMID:24303775

  2. Development of Viscosity Model for Petroleum Industry Applications

    NASA Astrophysics Data System (ADS)

    Motahhari, Hamed reza

    Heavy oil and bitumen are challenging to produce and process due to their very high viscosity, but their viscosity can be reduced either by heating or dilution with a solvent. Given the key role of viscosity, an accurate viscosity model suitable for use with reservoir and process simulators is essential. While there are several viscosity models for natural gases and conventional oils, a compositional model applicable to heavy petroleum and diluents is lacking. The objective of this thesis is to develop a general compositional viscosity model that is applicable to natural gas mixtures, conventional crudes oils, heavy petroleum fluids, and their mixtures with solvents and other crudes. The recently developed Expanded Fluid (EF) viscosity correlation was selected as a suitable compositional viscosity model for petroleum applications. The correlation relates the viscosity of the fluid to its density over a broad range of pressures and temperatures. The other inputs are pressure and the dilute gas viscosity. Each fluid is characterized for the correlation by a set of fluid-specific parameters which are tuned to fit data. First, the applicability of the EF correlation was extended to asymmetric mixtures and liquid mixtures containing dissolved gas components. A new set of mass-fraction based mixing rules was developed to calculate the fluid-specific parameters for mixtures. The EF correlation with the new set of mixing rules predicted the viscosity of over 100 mixtures of hydrocarbon compounds and carbon dioxide with overall average absolute relative deviations (AARD) of less than 10% either with measured densities or densities estimated by Advanced Peng-Robinson equation of state (APR EoS). To improve the viscosity predictions with APR EoS-estimated densities, general correlations were developed for non-zero viscosity binary interaction parameters. The EF correlation was extended to non-hydrocarbon compounds typically encountered in natural gas industry. It was

  3. Flat-plate solar array project: Government and industry responding to national needs

    NASA Technical Reports Server (NTRS)

    Adcock, J. Patrick; Knecht, Robert D.

    1988-01-01

    This document recounts the accomplishments of the 11-year Flat-Plate Solar Array Project, which is recognized as one of the most successful and comprehensive technology-transfer efforts ever achieved through government-sponsored research and development. Few Federal research projects can claim the degree of industry involvement that was a fundamental aspect of the FSA Project. This philosophy in turn led to an extraordinary transfer of technology to the private sector, and assured that a maximum amount of the taxpayers' dollars were devoted to research of primary importance to the technology's commercialization.

  4. Nutritionists in industry can play a key role in helping to achieve Health of the Nation targets for nutrition.

    PubMed

    Kirk, T R; de Looy, A; Fletcher, R; Ruxton, C H

    2007-06-01

    Nutritionists working in food manufacturing and retailing are potentially in a more powerful position than any other professional group to contribute towards achieving the national targets for nutrition and the reduction of nutrition-related diseases, set out in The Health of the Nation (DoH, 1992) and in Scotland's Health, A Challenge to Us All (Scottish Office, 1993). The present paper sets out the details of this argument. First, a review is given of the functions and types of activities carried out by nutritionists in industry. Then a number of key practical ways in which nutritionists, through their activities and functions, can help towards achieving national targets for nutrition and nutrition-related diseases are described. Finally, suggestions are made about the knowledge, skills, and personal attributes needed by nutritionists who intend making successful careers in industry and who wish, at the same time, to contribute towards improving the health of the nation. PMID:17539871

  5. Development of a framework of human-centered automation for the nuclear industry

    SciTech Connect

    Nelson, W.R.; Haney, L.N.

    1993-01-01

    Introduction of automated systems into control rooms for advanced reactor designs is often justified on the basis of increased efficiency and reliability, without a detailed assessment of how the new technologies will influence the role of the operator. Such a technology-centered'' approach carries with it the risk that entirely new mechanisms for human error will be introduced, resulting in some unpleasant surprises when the plant goes into operation. The aviation industry has experienced some of these surprises since the introduction of automated systems into the cockpits of advanced technology aircraft. Pilot errors have actually been induced by automated systems, especially when the pilot doesn't fully understand what the automated systems are doing during all modes of operation. In order to structure the research program for investigating these problems, the National Aeronautics and Space Administration (NASA) has developed a framework for human-centered automation. This framework is described in the NASA document Human-Centered Aircraft Automation Philosophy by Charles Billings. It is the thesis of this paper that a corresponding framework of human-centered automation should be developed for the nuclear industry. Such a framework would serve to guide the design and regulation of automated systems for advanced reactor designs, and would help prevent some of the problems that have arisen in other applications that have followed a technology-centered'' approach.

  6. Development of a framework of human-centered automation for the nuclear industry

    SciTech Connect

    Nelson, W.R.; Haney, L.N.

    1993-04-01

    Introduction of automated systems into control rooms for advanced reactor designs is often justified on the basis of increased efficiency and reliability, without a detailed assessment of how the new technologies will influence the role of the operator. Such a ``technology-centered`` approach carries with it the risk that entirely new mechanisms for human error will be introduced, resulting in some unpleasant surprises when the plant goes into operation. The aviation industry has experienced some of these surprises since the introduction of automated systems into the cockpits of advanced technology aircraft. Pilot errors have actually been induced by automated systems, especially when the pilot doesn`t fully understand what the automated systems are doing during all modes of operation. In order to structure the research program for investigating these problems, the National Aeronautics and Space Administration (NASA) has developed a framework for human-centered automation. This framework is described in the NASA document Human-Centered Aircraft Automation Philosophy by Charles Billings. It is the thesis of this paper that a corresponding framework of human-centered automation should be developed for the nuclear industry. Such a framework would serve to guide the design and regulation of automated systems for advanced reactor designs, and would help prevent some of the problems that have arisen in other applications that have followed a ``technology-centered`` approach.

  7. Necessity for Industry-Academic Economic Geology Collaborations for Energy Critical Minerals Research and Development

    NASA Astrophysics Data System (ADS)

    Hitzman, M.

    2012-12-01

    Economic geology is a highly interdisciplinary field utilizing a diverse set of petrologic, geochemical, geophysical, and tectonic data for improved scientific understanding of element migration and concentration in the crust (ore formation). A number of elements that were once laboratory curiosities now figure prominently in new energy technologies (e.g. wind turbines, solar energy collectors). If widely deployed, such technologies have the capacity to transform the way we produce, transmit, store, and conserve energy. To meet domestic and worldwide renewable energy needs these systems must be scaled from laboratory, to demonstration, to widespread deployment. Such technologies are materials intensive. If widely deployed, the elements required by these technologies will be needed in significant quantities and shortage of these "energy critical elements" could significantly inhibit the adoption of otherwise game changing energy technologies. It is imperative to better understand the geology, metallurgy, and mining engineering of critical mineral deposits if we are to sustainably develop these new technologies. There is currently no consensus among federal and state agencies, the national and international mining industry, the public, and the U.S. academic community regarding the importance of economic geology to secure sufficient energy critical elements to undertake large-scale renewable energy development. Available federal funding for critical elements focuses on downstream areas such as metallurgy, substitutions, and recycling rather than primary deposits. Undertaking the required research to discover and mine critical element deposits in an environmentally friendly manner will require significant partnering with industry due to the current lack of federal research support.

  8. The development of a national children’s formulary

    PubMed Central

    Lenney, Warren

    2015-01-01

    The British National Formulary has been in existence for over 30 years. The prescribing of medicines for children has been less well organized. Many medicines used in children have never been tested in the appropriate age groups and have been prescribed ‘off-label’. This has led to safety issues and concerns that children continued to be treated as second-class citizens. The first attempt at the development of a national formulary specifically for prescribing in children occurred in 1999 with the publication of ‘Medicines for Children’. This generated much national and international interest resulting in the government agreeing to fund the development and production of the first British National Formulary for Children in 2005. This article charts the process and progress of the formulary to the present day. PMID:24215142

  9. The Development of a National Agricultural Extension Policy in Bangladesh.

    ERIC Educational Resources Information Center

    Walker, M.; Sarkar, A. A.

    1996-01-01

    The background of agriculture in Bangladesh and the process of developing a national agricultural extension policy focused on sustainable development are described. The policy explicates the meaning of agricultural extension, use of agricultural knowledge and information systems, and 11 core principles. (SK)

  10. Adult Education and National Development: Concepts and Practices in India.

    ERIC Educational Resources Information Center

    Ministry of Education and Social Welfare, New Delhi (India).

    The importance of eradicating adult illiteracy in developing countries as a part of promoting community participation in democracy and in accelerating the rate of national development is treated in the study of adult education in India. Attempts have been made to: link adult education to major developmental and productive activities through…

  11. The Role of Education within National Human Resource Development Policy

    ERIC Educational Resources Information Center

    Schmidt, Kathleen V.

    2008-01-01

    Trade and economic viability are becoming increasingly important in all countries around the world. As a result, Human Resource Development (HRD) is becoming an integral part of a country's ability to sustain development and it is evident that many countries outside of the United States are integrating HRD as part of their national policy (NHRD).…

  12. A National Association: Our Growth, Organizational Development and Special Projects.

    ERIC Educational Resources Information Center

    Dorn, Charles M.

    The establishment of a unified voice, the development of a learned society, and the democratization of the National Art Education Association's (NAEA) governance are the three most significant changes that have occurred in the development of the NAEA since its establishment in 1947. During NAEA's foundational years, 1947-1958, many important…

  13. The Role of Adventure Education in Developing Nations.

    ERIC Educational Resources Information Center

    Beames, Simon

    2000-01-01

    Educational programs that teach agricultural practices, health care, or technology in developing nations can be complemented by adventure education. Adventure education can foster the social skills that enable people to cooperate, take initiative, and solve problems, and thereby contribute to their country's development. Arguments against the…

  14. Impact of urbanization and industrial development on holiday effect

    NASA Astrophysics Data System (ADS)

    Tan, P.-H.; Chen, P.-Y.

    2012-04-01

    Our study is to examine the "holiday effect", defined as the difference in air pollutant concentrations between holiday and non-holiday periods, and associated factors controlling the strength of holiday effect in Taiwan. This holiday effect can be applied to other countries with similar national or cultural holidays. Daily surface measurements of six major air pollutants from fifty-four air quality monitoring stations of the Taiwan Environmental Protection Administration (TEPA) during the Chinese New Year (CNY) and non-Chinese New Year (NCNY) periods of 1994-2008 are used. The air pollutant concentrations are significantly different between the CNY and NCNY periods, in almost all the Taiwan area, except CO in the eastern part which is a relatively less-developed area. The strengths of holiday effects of NOx, CO, NMHC and O3 are larger in the north than in the south, and those of SO2 and PM10 are larger in the south than in the north. Factors controlling the strength of holiday effect such as the degree of urbanization and anthropogenic sources are examined. The population number and motor vehicle number rather than the population number density and motor vehicle number density have a significantly positive relationship with the strengths of holiday effects of NOx, CO and NMHC. The strengths of holiday effects of NOx and CO are mainly contributed from mobile sources and those of SO2 and PM10 are from stationary sources and that of NMHC is from both mobile and stationary sources. As the dominant anthropogenic sources in the air quality division have larger emissions, holiday effect strengths of associated air pollutants are found to be stronger.

  15. Impact of urbanization and industrial development on holiday effect

    NASA Astrophysics Data System (ADS)

    Tan, P.; Chou, C.; Chen, P.

    2011-12-01

    Our study is to examine the "holiday effect", defined as the difference in air pollutant concentrations between holiday and non-holiday periods, and associated factors controlling the strength of holiday effect in Taiwan. This holiday effect can be applied to other countries with similar national or cultural holidays. Daily surface measurements of six major air pollutants from fifty-four air quality monitoring stations of the Taiwan Environmental Protection Administration (TEPA) during the Chinese New Year (CNY) and non-Chinese New Year (NCNY) periods of 1994-2008 are used. The air pollutant concentrations are significantly different between the CNY and NCNY periods, in almost all the Taiwan area, except CO in the eastern part which is a relatively less-developed area. The strengths of holiday effects of NOx, CO, NMHC and O3 are larger in the north than in the south, and those of SO2 and PM10 are larger in the south than in the north. Factors controlling the strength of holiday effect such as the degree of urbanization and anthropogenic sources are examined. The population number and motor vehicle number rather than the population number density and motor vehicle number density have a significantly positive relationship with the strengths of holiday effects of NOx, CO and NMHC. The strengths of holiday effects of NOx and CO are mainly contributed from mobile sources and those of SO2 and PM10 are from stationary sources and that of NMHC is from both mobile and stationary sources. As the dominant anthropogenic sources in the air quality division have larger emissions, holiday effect strengths of associated air pollutants are found to be stronger.

  16. Education for Sustainable Development at the United Nations Conference on Sustainable Development (Rio+20)

    ERIC Educational Resources Information Center

    Journal of Education for Sustainable Development, 2012

    2012-01-01

    The United Nations Conference on Sustainable Development (Rio+20) was held in Rio de Janeiro, Brazil, 20-22 June 2012, marking the twentieth anniversary of the United Nations Conference on Sustainable Development in Rio de Janeiro in 1992 and the tenth anniversary of the 2002 World Summit on Sustainable Development in Johannesburg. With more than…

  17. Emergy-based assessment on industrial symbiosis: a case of Shenyang Economic and Technological Development Zone.

    PubMed

    Geng, Yong; Liu, Zuoxi; Xue, Bing; Dong, Huijuan; Fujita, Tsuyoshi; Chiu, Anthony

    2014-12-01

    Industrial symbiosis is the sharing of services, utility, and by-product resources among industries. This is usually made in order to add value, reduce costs, and improve the environment, and therefore has been taken as an effective approach for developing an eco-industrial park, improving resource efficiency, and reducing pollutant emission. Most conventional evaluation approaches ignored the contribution of natural ecosystem to the development of industrial symbiosis and cannot reveal the interrelations between economic development and environmental protection, leading to a need of an innovative evaluation method. Under such a circumstance, we present an emergy analysis-based evaluation method by employing a case study at Shenyang Economic and Technological Development Zone (SETDZ). Specific emergy indicators on industrial symbiosis, including emergy savings and emdollar value of total emergy savings, were developed so that the holistic picture of industrial symbiosis can be presented. Research results show that nonrenewable inputs, imported resource inputs, and associated services could be saved by 89.3, 32.51, and 15.7 %, and the ratio of emergy savings to emergy of the total energy used would be about 25.58 %, and the ratio of the emdollar value of total emergy savings to the total gross regional product (GRP) of SETDZ would be 34.38 % through the implementation of industrial symbiosis. In general, research results indicate that industrial symbiosis could effectively reduce material and energy consumption and improve the overall eco-efficiency. Such a method can provide policy insights to industrial park managers so that they can raise appropriate strategies on developing eco-industrial parks. Useful strategies include identifying more potential industrial symbiosis opportunities, optimizing energy structure, increasing industrial efficiency, recovering local ecosystems, and improving public and industrial awareness of eco-industrial park policies.

  18. Emergy-based assessment on industrial symbiosis: a case of Shenyang Economic and Technological Development Zone.

    PubMed

    Geng, Yong; Liu, Zuoxi; Xue, Bing; Dong, Huijuan; Fujita, Tsuyoshi; Chiu, Anthony

    2014-12-01

    Industrial symbiosis is the sharing of services, utility, and by-product resources among industries. This is usually made in order to add value, reduce costs, and improve the environment, and therefore has been taken as an effective approach for developing an eco-industrial park, improving resource efficiency, and reducing pollutant emission. Most conventional evaluation approaches ignored the contribution of natural ecosystem to the development of industrial symbiosis and cannot reveal the interrelations between economic development and environmental protection, leading to a need of an innovative evaluation method. Under such a circumstance, we present an emergy analysis-based evaluation method by employing a case study at Shenyang Economic and Technological Development Zone (SETDZ). Specific emergy indicators on industrial symbiosis, including emergy savings and emdollar value of total emergy savings, were developed so that the holistic picture of industrial symbiosis can be presented. Research results show that nonrenewable inputs, imported resource inputs, and associated services could be saved by 89.3, 32.51, and 15.7 %, and the ratio of emergy savings to emergy of the total energy used would be about 25.58 %, and the ratio of the emdollar value of total emergy savings to the total gross regional product (GRP) of SETDZ would be 34.38 % through the implementation of industrial symbiosis. In general, research results indicate that industrial symbiosis could effectively reduce material and energy consumption and improve the overall eco-efficiency. Such a method can provide policy insights to industrial park managers so that they can raise appropriate strategies on developing eco-industrial parks. Useful strategies include identifying more potential industrial symbiosis opportunities, optimizing energy structure, increasing industrial efficiency, recovering local ecosystems, and improving public and industrial awareness of eco-industrial park policies. PMID

  19. Challenges in sensor development for the electric utility industry

    NASA Astrophysics Data System (ADS)

    Ward, Barry H.

    1999-01-01

    The electric utility industry is reducing operating costs in order to prepare for deregulation. The reduction in operating cost has meant a reduction in manpower. The ability to utilize remaining maintenance staff more effectively and to stay competitive in a deregulated environment has therefore become critical. In recent years, the industry has moved away from routine or periodic maintenance to predictive or condition based maintenance. This requires the assessment of equipment condition by frequent testing and inspection; a requirement that is incompatible with cost reduction. To overcome this dilemma, industry trends are toward condition monitoring, whereby the health of apparatus is monitored continuously. This requires the installation of sensors hr transducers on power equipment and the data taken forwarded to an intelligent device for further processing. These devices then analyze the data and make evaluations based on parameter levels or trends, in an attempt to predict possible deterioration. This continuous monitoring allows the electric utility to schedule maintenance on an as needed basis. The industry has been faced with many challenges in sensor design. The measurement of physical, chemical and electrical parameters under extreme conditions of electric fields, magnetic fields, temperature, corrosion, etc. is extensive. This paper will give an overview of these challenges and the solutions adopted for apparatus such as power transformers, circuit breakers, boilers, cables, batteries, and rotating machinery.

  20. Industry/Postsecondary Education Partnership for Faculty Development.

    ERIC Educational Resources Information Center

    Zanville, Holly

    The project addressed the need for Oregon higher education faculty to receive state-of-the art information from Oregon businesses and industries in computer science, business, and engineering areas. Planning for a statewide interactive Eudcational Television Network (ED-NET) has been underway in Oregon for several years. The network will involve…

  1. Industrial Wind Turbine Development and Loss of Social Justice?

    ERIC Educational Resources Information Center

    Krogh, Carmen M. E.

    2011-01-01

    This article explores the loss of social justice reported by individuals living in the environs of industrial wind turbines (IWTs). References indicate that some individuals residing in proximity to IWT facilities experience adverse health effects. These adverse health effects are severe enough that some families have abandoned their homes.…

  2. Late industrial development and occupational health in southern Italy.

    PubMed

    Assennato, Giorgio; Bisceglia, Lucia; De Nichilo, Gigliola; Grassi, Maria Emanuela; Lo Izzo, Antonio

    2005-01-01

    The authors report the occupational medicine problems in the Apulia region, which are representative of those in Southern Italy. Late industrialization was associated with an early peak in injuries that was not associated with an increased workforce. Examples of operations adversely affecting worker and population health are presented.

  3. Sexual development in the industrial workhorse Trichoderma reesei.

    PubMed

    Seidl, Verena; Seibel, Christian; Kubicek, Christian P; Schmoll, Monika

    2009-08-18

    Filamentous fungi are indispensable biotechnological tools for the production of organic chemicals, enzymes, and antibiotics. Most of the strains used for industrial applications have been--and still are--screened and improved by classical mutagenesis. Sexual crossing approaches would yield considerable advantages for research and industrial strain improvement, but interestingly, industrially applied filamentous fungal species have so far been considered to be largely asexual. This is also true for the ascomycete Trichoderma reesei (anamorph of Hypocrea jecorina), which is used for production of cellulolytic and hemicellulolytic enzymes. In this study, we report that T. reesei QM6a has a MAT1-2 mating type locus, and the identification of its respective mating type counterpart, MAT1-1, in natural isolates of H. jecorina, thus proving that this is a heterothallic species. After being considered asexual since its discovery more than 50 years ago, we were now able to induce sexual reproduction of T. reesei QM6a and obtained fertilized stromata and mature ascospores. This sexual crossing approach therefore opens up perspectives for biotechnologically important fungi. Our findings provide a tool for fast and efficient industrial strain improvement in T. reesei, thus boosting research toward economically feasible biofuel production. In addition, knowledge of MAT-loci and sexual crossing techniques will facilitate research with other Trichoderma spp. relevant for agriculture and human health.

  4. Sexual development in the industrial workhorse Trichoderma reesei

    PubMed Central

    Seidl, Verena; Seibel, Christian; Kubicek, Christian P.; Schmoll, Monika

    2009-01-01

    Filamentous fungi are indispensable biotechnological tools for the production of organic chemicals, enzymes, and antibiotics. Most of the strains used for industrial applications have been—and still are—screened and improved by classical mutagenesis. Sexual crossing approaches would yield considerable advantages for research and industrial strain improvement, but interestingly, industrially applied filamentous fungal species have so far been considered to be largely asexual. This is also true for the ascomycete Trichoderma reesei (anamorph of Hypocrea jecorina), which is used for production of cellulolytic and hemicellulolytic enzymes. In this study, we report that T. reesei QM6a has a MAT1-2 mating type locus, and the identification of its respective mating type counterpart, MAT1-1, in natural isolates of H. jecorina, thus proving that this is a heterothallic species. After being considered asexual since its discovery more than 50 years ago, we were now able to induce sexual reproduction of T. reesei QM6a and obtained fertilized stromata and mature ascospores. This sexual crossing approach therefore opens up perspectives for biotechnologically important fungi. Our findings provide a tool for fast and efficient industrial strain improvement in T. reesei, thus boosting research toward economically feasible biofuel production. In addition, knowledge of MAT-loci and sexual crossing techniques will facilitate research with other Trichoderma spp. relevant for agriculture and human health. PMID:19667182

  5. Industrial robots in Europe - market, applications and developments

    NASA Technical Reports Server (NTRS)

    Schraft, R. D.

    1975-01-01

    Different companies involving a wide range of products and manufacturing processes were studied to define the requirements for industrial robots. A survey of all such automatic units offered on the world market was made to establish a data base. Principal applications include coating, spot welding, and loading and unloading operations.

  6. Economic development and fertility decline: lessons from Asia's newly industrialized countries.

    PubMed

    Robey, B

    1991-03-01

    The general thesis that economic development and fertility decline are interrelated is substantiated in literature that discusses the successes of the newly industrialized countries of Hong Kong, Korea, Singapore, and Taiwan. When countries are developing rapidly, family planning accelerates the rate of fertility change, particularly among the poor uneducated rural population. Relying on economic and social development is not enough. National policy in Hong Kong, Singapore, Korea, and Taiwan recognized that population growth drains resources and the family planning programs operating since the 1960s contributed to a drop from 5 children/woman to 2 by 1988, and 70% of married couples used contraception. Coupled with this, age at marriage rose, contraception became more available, and educational and employment opportunities increased. Economically, the growth rate in the 1980's was 6-10% annually, with growth in the manufacturing and service sectors and export trade. Close economic ties evolved between governments and private sectors. Social development programs had been fully funded and gains evident in education, living standards, health care and nutrition, and life expectancy. The success of family planning is attributed to encouraging contraceptive awareness and use. Fertility reduction may occur with social and economic development, but no developing countries have reduced fertility without family planning. The relative importance of family planning may change over time, and reducing the cost through government sponsored family planning programs and encouraging the acceptability of contraceptive usage. PMID:12283895

  7. Alignment of Teacher-Developed Curricula and National Standards in Qatar's National Education Reform

    ERIC Educational Resources Information Center

    Nasser, Ramzi; Zaki, Eman; Allen, Nancy; Al Mula, Badria; Al Mutawaha, Fatma; Al Bin Ali, Hessa; Kerr, Tricia

    2014-01-01

    This study investigated the degree to which teacher developed curriculum was aligned with the national standards in Qatar. Three sources of data included teacher response to a questionnaire, teacher interviews and expert rating of the alignment of teacher-developed materials with curriculum standards. A survey and interview questions measured…

  8. 76 FR 25309 - National Climate Assessment and Development Advisory Committee (NCADAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-04

    ... National Oceanic and Atmospheric Administration National Climate Assessment and Development Advisory... National Climate Assessment and Development Advisory Committee (NCADAC). The members will discuss and... be determined. Please check the National Climate Assessment Web site for this information at...

  9. 76 FR 11427 - National Climate Assessment Development and Advisory Committee; Request for Nominations and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-02

    ... National Oceanic and Atmospheric Administration National Climate Assessment Development and Advisory... Administration; Department of Commerce. ACTION: Request for nominations to the National Climate Assessment... qualified individuals for the National Climate Assessment Development and Advisory Committee (NCADAC)...

  10. 75 FR 81233 - National Climate Assessment Development and Advisory Committee; Establishment and Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-27

    ... National Oceanic and Atmospheric Administration National Climate Assessment Development and Advisory...: This Notice advises of the public of the establishment of the National Climate Assessment Development... with GSA, the Secretary of Commerce has determined that the establishment of the National...

  11. Global burden of atrial fibrillation in developed and developing nations.

    PubMed

    Chugh, Sumeet S; Roth, Gregory A; Gillum, Richard F; Mensah, George A

    2014-03-01

    Atrial fibrillation is the most common heart rhythm disorder in the world, with major public health impact especially due to increased risk of stroke and hospitalizations. The recently published results on epidemiology of atrial fibrillation from the Global Burden of Diseases, Injuries, and Risk Factors Study confirm the existence of a significant and progressive worldwide increase in the burden of atrial fibrillation. However, there appears to be regional variation in both the burden of atrial fibrillation and availability of epidemiological data regarding this condition. In this review, the authors identify issues that are unique to the developed versus developing regions and outline a road map for possible approaches to surveillance, management, and prevention of atrial fibrillation at the global level.

  12. The application of an industry level participatory ergonomics approach in developing MSD interventions.

    PubMed

    Tappin, D C; Vitalis, A; Bentley, T A

    2016-01-01

    Participatory ergonomics projects are traditionally applied within one organisation. In this study, a participative approach was applied across the New Zealand meat processing industry, involving multiple organisations and geographical regions. The purpose was to develop interventions to reduce musculoskeletal disorder (MSD) risk. This paper considers the value of an industry level participatory ergonomics approach in achieving this. The main rationale for a participative approach included the need for industry credibility, and to generate MSD interventions that address industry level MSD risk factors. An industry key stakeholder group became the primary vehicle for formal participation. The study resulted in an intervention plan that included the wider work system and industry practices. These interventions were championed across the industry by the key stakeholder group and have extended beyond the life of the study. While this approach helped to meet the study aim, the existence of an industry-supported key stakeholder group and a mandate for the initiative are important prerequisites for success.

  13. The application of an industry level participatory ergonomics approach in developing MSD interventions.

    PubMed

    Tappin, D C; Vitalis, A; Bentley, T A

    2016-01-01

    Participatory ergonomics projects are traditionally applied within one organisation. In this study, a participative approach was applied across the New Zealand meat processing industry, involving multiple organisations and geographical regions. The purpose was to develop interventions to reduce musculoskeletal disorder (MSD) risk. This paper considers the value of an industry level participatory ergonomics approach in achieving this. The main rationale for a participative approach included the need for industry credibility, and to generate MSD interventions that address industry level MSD risk factors. An industry key stakeholder group became the primary vehicle for formal participation. The study resulted in an intervention plan that included the wider work system and industry practices. These interventions were championed across the industry by the key stakeholder group and have extended beyond the life of the study. While this approach helped to meet the study aim, the existence of an industry-supported key stakeholder group and a mandate for the initiative are important prerequisites for success. PMID:26360206

  14. Relating national veterinary services to the country's livestock industry: case studies from four countries--Great Britain, Botswana, Perú, and Vietnam.

    PubMed

    Windsor, Roger S

    2002-10-01

    At the end of WW II, the British Government of the time decided that it was essential for Britain to become self-sufficient in food. In consequence there was a large investment in services to agriculture and in particular many new veterinary investigation centers were opened to help farmers produce more animal products. The upsurge in world trade led the Government of Mrs. Thatcher to decide that livestock was just another commodity and so there has been a massive scaling down of money available to assist the livestock farmer. For Botswana the livestock industry is vital to the well-being of the people and successive Governments have continued to invest in veterinary services. As a consequence, Botswana has one of the best and most efficient Veterinary Services in Africa. By contrast, the livestock industry in Perú has an insignificant effect on the gross national product. The fiber exports from camelids are a small international market, while the dairy industry is unable to provide sufficient milk for the nation. Partly as a result of this, the Peruvian Government invests very little in the livestock industry or the veterinary services that support it. Vietnam is in a transitional stage: there is a large but as yet unorganized livestock industry with a mass of smallholder farmers. The Government has made a large investment in people in the Department of Animal Health but without a concomitant investment in equipment and training. If the industry is to develop, it will require much more investment from the government. These countries will be discussed in more detail and an attempt will be made to show how by relating the services to the livestock industry, governments can improve services and at the same time cut the costs. PMID:12381561

  15. Development of A Flexible System for the Simultaneous Conversion of Biomass to Industrial Chemicals and the Production of Industrial Biocatalysts

    SciTech Connect

    Gao, Johnway; Hooker, Brian S.; Skeen, R S.; Anderson, D B.; Lankey, R. L.; Anastas, P. T.

    2002-01-01

    A flexible system was developed for the simultaneous conversion of biomass to industrial chemicals and the production of industrial biocatalysts. In particular, the expression of a bacterial enzyme, beta-glucuronidase (GUS), was investigated using a genetically modified starch-degrading Saccharomyces strain in suspension cultures in starch media. Different sources of starch including corn and waste potato starch were used for yeast biomass accumulation and GUS expression studies under controls of inducible and constitutive promoters. A thermostable bacterial cellulase, Acidothermus cellulolyticus E1 endoglucanase gene was also cloned into an episomal plasmid expression vector and expressed in the starch-degrading Saccharomyces strain.

  16. National park development in China: conservation or commercialization?

    PubMed

    Wang, Guangyu; Innes, John L; Wu, Sara W; Krzyzanowski, Judi; Yin, Yongyuan; Dai, Shuanyou; Zhang, Xiaoping; Liu, Sihui

    2012-05-01

    The rapid development of parks and ecotourism in China has attracted worldwide attention, not only for the beauty of the landscape that the parks are protecting but also for their abundant and often unique biodiversity. However, in some areas, the development of ecotourism has actually led to the degradation of local ecological, economic, and social systems. Using National Forest Parks for demonstration, this article analyzes the current political, institutional, legal, environmental, and economic issues concerning National Parks in China, and examines their potential future development. Although the intention of National Park systems in China is to raise environmental quality, and to protect biodiversity and social livelihoods, their success has varied. Future success will be measured by their capacity to reduce poverty, to promote long-term rehabilitation of wildlife habitats, and to simultaneously protect Chinese culture and biodiversity. PMID:22038320

  17. National park development in China: conservation or commercialization?

    PubMed

    Wang, Guangyu; Innes, John L; Wu, Sara W; Krzyzanowski, Judi; Yin, Yongyuan; Dai, Shuanyou; Zhang, Xiaoping; Liu, Sihui

    2012-05-01

    The rapid development of parks and ecotourism in China has attracted worldwide attention, not only for the beauty of the landscape that the parks are protecting but also for their abundant and often unique biodiversity. However, in some areas, the development of ecotourism has actually led to the degradation of local ecological, economic, and social systems. Using National Forest Parks for demonstration, this article analyzes the current political, institutional, legal, environmental, and economic issues concerning National Parks in China, and examines their potential future development. Although the intention of National Park systems in China is to raise environmental quality, and to protect biodiversity and social livelihoods, their success has varied. Future success will be measured by their capacity to reduce poverty, to promote long-term rehabilitation of wildlife habitats, and to simultaneously protect Chinese culture and biodiversity.

  18. IPAD: A unique approach to government/industry cooperation for technology development and transfer

    NASA Technical Reports Server (NTRS)

    Fulton, Robert E.; Salley, George C.

    1985-01-01

    A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

  19. Development of Viscosity Model for Petroleum Industry Applications

    NASA Astrophysics Data System (ADS)

    Motahhari, Hamed reza

    Heavy oil and bitumen are challenging to produce and process due to their very high viscosity, but their viscosity can be reduced either by heating or dilution with a solvent. Given the key role of viscosity, an accurate viscosity model suitable for use with reservoir and process simulators is essential. While there are several viscosity models for natural gases and conventional oils, a compositional model applicable to heavy petroleum and diluents is lacking. The objective of this thesis is to develop a general compositional viscosity model that is applicable to natural gas mixtures, conventional crudes oils, heavy petroleum fluids, and their mixtures with solvents and other crudes. The recently developed Expanded Fluid (EF) viscosity correlation was selected as a suitable compositional viscosity model for petroleum applications. The correlation relates the viscosity of the fluid to its density over a broad range of pressures and temperatures. The other inputs are pressure and the dilute gas viscosity. Each fluid is characterized for the correlation by a set of fluid-specific parameters which are tuned to fit data. First, the applicability of the EF correlation was extended to asymmetric mixtures and liquid mixtures containing dissolved gas components. A new set of mass-fraction based mixing rules was developed to calculate the fluid-specific parameters for mixtures. The EF correlation with the new set of mixing rules predicted the viscosity of over 100 mixtures of hydrocarbon compounds and carbon dioxide with overall average absolute relative deviations (AARD) of less than 10% either with measured densities or densities estimated by Advanced Peng-Robinson equation of state (APR EoS). To improve the viscosity predictions with APR EoS-estimated densities, general correlations were developed for non-zero viscosity binary interaction parameters. The EF correlation was extended to non-hydrocarbon compounds typically encountered in natural gas industry. It was

  20. Mineral resources accounting: A technique formonitoring the Philippine mining industry for sustainable development

    NASA Astrophysics Data System (ADS)

    Santos, Teodoro M.; Zaratan, May L.

    Mining which extracts exhaustible mineral resources has been condemned by certain sectors as promoting social inequity and underdevelopment. This is so because once a tonne of copper, say, is mined it is forever lost to the future generation. Such perception translates into policies that are usually disadvantageous or even hostile to the industry. Despite this adverse criticism, recent developments in natural resources accounting indicate that mining can truly contribute to the sustainable economic development of a society. True worth of mining in economic development can be assessed and monitored on a continuing basis through an appropriate system of natural accounts (SNA). If the industry is found deficient, such SNA can also point out how the industry can be made to constribute to sustainable growth. The prevailing SNA is criticized as having failed to capture the adverse effects on the welfare of society of producing a nonrenewable resource such as minerals. For instance, the production of copper for a particular year registers an increase in gross national product equivalent to its monetary value. However, the concomitant depletion of the country's natural wealth due to such production is nowhere recorded in the SNA. This faulty accounting gives rise to policies that result in nonsustainable economic growth. In order to address the preceding problem, this paper presents an accounting formula applicable to any nonrenewable resource whereby revenue is decomposed into income and capital components. To achieve sustainable economic growth, it states that the capital component must be invested to generate future incomes. However, investments need not be confined to the same sector. Application of the accounting scheme to the Philippine copper and gold sectors during the 1980-1990 period leads to the following conclusions: (a) by and large, gold and copper mining operations have indeed contributed positively to national income, contrary to allegations of certain

  1. 77 FR 28904 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment to the National...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-16

    ... Symbology Plan that was originally proposed by the Chicago Stock Exchange, Inc. (``CHX''), The Nasdaq Stock... Industry Regulatory Authority, Inc. (``FINRA'')), National Stock Exchange, Inc. (``NSX''), and Philadelphia Stock Exchange, Inc. (``Phlx''), subject to certain changes. See Securities Exchange Act Release...

  2. The Implications of the National Minimum Wage for Training Practices and Skill Utilisation in the United Kingdom Hospitality Industry

    ERIC Educational Resources Information Center

    Norris, Gill; Williams, Steve; Adam-Smith, Derek

    2003-01-01

    Two key issues thrown up by the 1999 introduction of the National Minimum Wage (NMW) in the United Kingdom are its likely impact on employers' training practices in low paying sectors of the economy and the implications for skills. Based on a study of the hospitality industry, this article assesses the limited significance of the differential,…

  3. 46 CFR 11.462 - Requirements for national endorsement as master or mate of uninspected fishing industry vessels.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Requirements for national endorsement as master or mate... mate of uninspected fishing industry vessels. (a) This section applies to endorsements for masters and mates of all vessels, however propelled, navigating the high seas, which are documented to engage in...

  4. An Economic Profile of the U. S. Book Industry. National Program for Libraries and Information Services Related Paper No. 12.

    ERIC Educational Resources Information Center

    Benjamin, Curtis G.

    The economics of book publishing are described in this study completed for the National Commission on Libraries and Information Science. Segments of the book industry are compared by annual sales and titles published, as is profitability by categories of publishing. Operating statements of major categories are examined and capital requirements and…

  5. Monolithic circuit development for RHIC at Oak Ridge National Laboratory

    SciTech Connect

    Alley, G.T.; Britton, C.L. Jr.; Kennedy, E.J.; Newport, D.F.; Wintenberg, A.L.; Young, G.R.

    1991-12-31

    The work performed for RHIC at Oak Ridge National Laboratory during FY 91 is presented in this paper. The work includes preamplifier, analog memory, and analog-digital converter development for Dimuon Pad Readout, and evaluation and development of preamplifier-shapers for silicon strip readout. The approaches for implementation are considered as well as measured data for the various circuits that have been developed.

  6. Idaho National Laboratory Directed Research and Development FY-2009

    SciTech Connect

    Not Available

    2010-03-01

    The FY 2009 Laboratory Directed Research and Development (LDRD) Annual Report is a compendium of the diverse research performed to develop and ensure the INL's technical capabilities can support the future DOE missions and national research priorities. LDRD is essential to the INL - it provides a means for the laboratory to pursue novel scientific and engineering research in areas that are deemed too basic or risky for programmatic investments. This research enhances technical capabilities at the laboratory, providing scientific and engineering staff with opportunities for skill building and partnership development. Established by Congress in 1991, LDRD proves its benefit each year through new programs, intellectual property, patents, copyrights, publications, national and international awards, and new hires from the universities and industry, which helps refresh the scientific and engineering workforce. The benefits of INL's LDRD research are many as shown in the tables below. Last year, 91 faculty members from various universities contributed to LDRD research, along with 7 post docs and 64 students. Of the total invention disclosures submitted in FY 2009, 7 are attributable to LDRD research. Sixty three refereed journal articles were accepted or published, and 93 invited presentations were attributable to LDRD research conducted in FY 2009. The LDRD Program is administered in accordance with requirements set in DOE Order 413.2B, accompanying contractor requirements, and other DOE and federal requirements invoked through the INL contract. The LDRD Program is implemented in accordance with the annual INL LDRD Program Plan, which is approved by the DOE, Nuclear Energy Program Secretarial Office. This plan outlines the method the laboratory uses to develop its research portfolio, including peer and management reviews, and the use of other INL management systems to ensure quality, financial, safety, security and environmental requirements and risks are appropriately

  7. 78 FR 68459 - Medical Device Development Tools; Draft Guidance for Industry, Tool Developers, and Food and Drug...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-14

    ... guidance to FDA staff, industry, healthcare providers, researchers, and patient and consumer groups on a... HUMAN SERVICES Food and Drug Administration Medical Device Development Tools; Draft Guidance for Industry, Tool Developers, and Food and Drug Administration Staff; Availability AGENCY: Food and...

  8. Developing milk industry estimates for dose reconstruction projects

    SciTech Connect

    Beck, D.M.; Darwin, R.F. )

    1991-01-01

    One of the most important contributors to radiation doses from hanford during the 1944-1947 period was radioactive iodine. Consumption of milk from cows that ate vegetation contaminated with iodine is likely the dominant pathway of human exposure. To estimate the doses people could have received from this pathway, it is necessary to reconstruct the amount of milk consumed by people living near Hanford, the source of the milk, and the type of feed that the milk cows ate. This task is challenging because the dairy industry has undergone radical changes since the end of World War 2, and records that document the impact of these changes on the study area are scarce. Similar problems are faced by researchers on most dose reconstruction efforts. The purpose of this work is to document and evaluate the methods used on the Hanford Environmental Dose Reconstruction (HEDR) Project to reconstruct the milk industry and to present preliminary results.

  9. US energy industry financial developments, 1994 first quarter

    SciTech Connect

    Not Available

    1994-06-23

    This report traces key financial trends in the US energy industry for the first quarter of 1994. Financial data (only available for publicly-traded US companies) are included in two broad groups -- fossil fuel production and rate-regulated electric utilities. All financial data are taken from public sources such as energy industry corporate reports and press releases, energy trade publications, and The Wall Street Journal`s, Earnings Digest. Return on equity is calculated from data available from Standard and Poor`s Compustat data service. Since several major petroleum companies disclose their income by lines of business and geographic area. These data are also presented in this report. Although the disaggregated income concept varies by company and is not strictly comparable to corporate income, relative movements in income by lines of business and geographic area are summarized as useful indicators of short-term changes in the underlying profitability of these operations.

  10. Development paths of China's agricultural Pharmaceutical industry under Eco-agriculture background.

    PubMed

    Li, Jinkai; Gong, Liutang; Ji, Xi; Zhang, Jin; Miao, Pei

    2014-07-01

    Using pesticides has double effects. On one hand, it contributes to pests control and regulates the growth of crops; On the other hand, it does harm to the environment. To develop ecological agriculture should not only emphasize the output level of agriculture to pursuit of economic efficiency, but also need to keep the ecological environment protected and focus on the social benefits during the development of the industry. As a large agricultural country in the world, China is vigorously promoting the development of ecological agriculture, which is bound to put forward to developing the pesticide industry and green ecological development requirements to promote the transformation and upgrading of agricultural pharmaceutical industry. This paper discusses the mechanism of pesticide pollution on the ecological environment and analyzes China's agricultural problems in the pharmaceutical industry. Then study on the development of Chinese green pesticides and try to find the proper paths of agricultural pharmaceutical to achieve industrial upgrading.

  11. A National Skills Assessment of the U.S. Wind Industry in 2012

    SciTech Connect

    Leventhal, M.; Tegen, S.

    2013-06-01

    This report examines today’s domestic wind workforce, projected workforce needs as the industry grows, and how existing and new programs can meet the wind industry's future education and training needs.

  12. 76 FR 10067 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Industrial...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-23

    ...--Industrial Macromolecular Crystallography Association Correction In notice document 2011--2412 appearing on... and Production Act of 1993--Industrial Nacromolecular Crystallography Association'' should read... Macromolecular Crystallography Association''. 2. On the same page, in the second column, in the fourth line...

  13. 78 FR 66744 - Draft Guidance for Industry on Pulmonary Tuberculosis: Developing Drugs for Treatment; Availability

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-06

    ... HUMAN SERVICES Food and Drug Administration Draft Guidance for Industry on Pulmonary Tuberculosis... industry entitled ``Pulmonary Tuberculosis: Developing Drugs for Treatment.'' The purpose of the draft... tuberculosis. This guidance applies to the development of a single investigational drug as well as...

  14. 49 CFR 1242.86 - Industrial development (account XX-61-90).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Industrial development (account XX-61-90). 1242.86 Section 1242.86 Transportation Other Regulations Relating to Transportation (Continued) SURFACE....86 Industrial development (account XX-61-90). These accounts pertain solely to freight service...

  15. 49 CFR 1242.86 - Industrial development (account XX-61-90).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 9 2014-10-01 2014-10-01 false Industrial development (account XX-61-90). 1242.86 Section 1242.86 Transportation Other Regulations Relating to Transportation (Continued) SURFACE....86 Industrial development (account XX-61-90). These accounts pertain solely to freight service...

  16. 49 CFR 1242.86 - Industrial development (account XX-61-90).

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 9 2012-10-01 2012-10-01 false Industrial development (account XX-61-90). 1242.86 Section 1242.86 Transportation Other Regulations Relating to Transportation (Continued) SURFACE....86 Industrial development (account XX-61-90). These accounts pertain solely to freight service...

  17. 49 CFR 1242.86 - Industrial development (account XX-61-90).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 9 2011-10-01 2011-10-01 false Industrial development (account XX-61-90). 1242.86 Section 1242.86 Transportation Other Regulations Relating to Transportation (Continued) SURFACE....86 Industrial development (account XX-61-90). These accounts pertain solely to freight service...

  18. 49 CFR 1242.86 - Industrial development (account XX-61-90).

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 9 2013-10-01 2013-10-01 false Industrial development (account XX-61-90). 1242.86 Section 1242.86 Transportation Other Regulations Relating to Transportation (Continued) SURFACE....86 Industrial development (account XX-61-90). These accounts pertain solely to freight service...

  19. The Importance of Industrial Ecology in Engineering Education for Sustainable Development

    ERIC Educational Resources Information Center

    Biswas, Wahidul K.

    2012-01-01

    Purpose: The purpose of this paper is to show how industrial ecology can facilitate the achievement of sustainable development through its incorporation into an engineering curriculum. Design/methodology/approach: A model has been developed for assessing sustainability learning outcomes due to the incorporation of the concept of industrial ecology…

  20. Origin and Development of Industrial Education at Alcorn Agricultural and Mechanical College.

    ERIC Educational Resources Information Center

    Smith, Jay T.

    This study covering the last 100 years in the development of industrial education at Alcorn Agricultural and Mechanical College was prompted by the need to determine the role of the college in the development of industrial education in the state of Mississippi. Sources of data included college catalogs, reports of the college administration and…

  1. Progressive MS Alliance Industry Forum: Maximizing Collective Impact To Enable Drug Development.

    PubMed

    Zaratin, P; Comi, G; Coetzee, T; Ramsey, K; Smith, K; Thompson, A; Panzara, M

    2016-10-01

    The Progressive MS Alliance Industry Forum describes a new approach to address barriers to developing treatments for progressive multiple sclerosis (MS). This innovative model promises to facilitate robust collaboration between industry, academia, and patient organizations and accelerate research towards the overarching goal of developing safe and effective treatments for progressive MS.

  2. A random spatial sampling method in a rural developing nation

    PubMed Central

    2014-01-01

    Background Nonrandom sampling of populations in developing nations has limitations and can inaccurately estimate health phenomena, especially among hard-to-reach populations such as rural residents. However, random sampling of rural populations in developing nations can be challenged by incomplete enumeration of the base population. Methods We describe a stratified random sampling method using geographical information system (GIS) software and global positioning system (GPS) technology for application in a health survey in a rural region of Guatemala, as well as a qualitative study of the enumeration process. Results This method offers an alternative sampling technique that could reduce opportunities for bias in household selection compared to cluster methods. However, its use is subject to issues surrounding survey preparation, technological limitations and in-the-field household selection. Application of this method in remote areas will raise challenges surrounding the boundary delineation process, use and translation of satellite imagery between GIS and GPS, and household selection at each survey point in varying field conditions. This method favors household selection in denser urban areas and in new residential developments. Conclusions Random spatial sampling methodology can be used to survey a random sample of population in a remote region of a developing nation. Although this method should be further validated and compared with more established methods to determine its utility in social survey applications, it shows promise for use in developing nations with resource-challenged environments where detailed geographic and human census data are less available. PMID:24716473

  3. [International trade in health services and the medical industrial complex: implications for national health systems].

    PubMed

    Santos, Maria Angelica Borges dos; Passos, Sonia Regina Lambert

    2010-08-01

    Health services have increasingly proven to be an innovative sector, gaining prominence in the medical industrial complex through expansion to public and international markets. International trade can foster economic development and redirect the resources and infrastructure available for healthcare in different countries in favorable or unfavorable directions. Wherever private providers play a significant role in government-funded healthcare, GATS commitments may restrict health policy options in subscribing countries. Systematic information on the impacts of electronic health services, medical tourism, health workers' migration, and foreign direct investment is needed on a case-by-case basis to build evidence for informed decision-making, so as to maximize opportunities and minimize risks of GATS commitments. PMID:21229208

  4. [International trade in health services and the medical industrial complex: implications for national health systems].

    PubMed

    Santos, Maria Angelica Borges dos; Passos, Sonia Regina Lambert

    2010-08-01

    Health services have increasingly proven to be an innovative sector, gaining prominence in the medical industrial complex through expansion to public and international markets. International trade can foster economic development and redirect the resources and infrastructure available for healthcare in different countries in favorable or unfavorable directions. Wherever private providers play a significant role in government-funded healthcare, GATS commitments may restrict health policy options in subscribing countries. Systematic information on the impacts of electronic health services, medical tourism, health workers' migration, and foreign direct investment is needed on a case-by-case basis to build evidence for informed decision-making, so as to maximize opportunities and minimize risks of GATS commitments.

  5. Does the biofuel industry, with the aid of certification programs, contribute to sustainable development?

    NASA Astrophysics Data System (ADS)

    Kierulff, James Michael

    Despite being a source of alternative energy and an avenue for broad economic development, a number of biofuel producers have demonstrated that the biofuel industry has significant potential for unleashing social, environmental and economic harm. To largely avoid such perils, the industry must demonstrate that it is operating in a sustainable manner, contributing to the sustainable development of all stakeholders who rely upon the industry's responsible operation. Recently minted, internationally developed certification programs have been developed to move the industry into sustainable compliance and to offer a means by which stakeholders can incentivize the industry toward greater levels of sustainability practice. Using OLS regression analysis, this dissertation estimates that the industry is currently operating within the bounds of sustainable development as measured through the World Bank's sustainability model. This conclusion, however, is made with some caution. Many biofuel industry certification programs, despite covering a number of sustainable issues, have created loopholes within their criteria that must be resolved to avert greater long term damage to sustainable development. This work will conclude with methods and additional criteria that can be used to help move the biofuel industry toward more stable and sustainable development activity.

  6. 48 CFR 206.302-3 - Industrial mobilization; or engineering, development, or research capability.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Industrial mobilization; or engineering, development, or research capability. 206.302-3 Section 206.302-3 Federal Acquisition... engineering, development, or research capability....

  7. Music Education as a Panacea for National Development

    ERIC Educational Resources Information Center

    Ogunrinade, D. O. A

    2015-01-01

    This paper appraises music as an essential part of Nigerian culture and its implication for national development. It discussed music as important aspect of culture and the rationale for the inclusion of the subject in Nigerian schools at all levels of education. It also explicates music education available in the community as well. The music…

  8. Recent developments in the target facilities at Argonne National Laboratory

    SciTech Connect

    Greene, J.P.; Thomas, G.E.

    1988-01-01

    A description is given of recent developments in the target facility at Argonne National Laboratory. Highlights include equipment upgrades which enables us to provide enhanced capabilities for support of the Argonne Heavy-Ion ATLAS Accelerator Project. Also future plans and additional equipment acquisitions will be discussed. 3 refs., 3 tabs.

  9. National Human Resource Development: A Multi-Level Perspective

    ERIC Educational Resources Information Center

    Nair, Prakash Krishnan; Ke, Jie; Al-Emadi, Mohammed A. S.; Coningham, Beatriz; Conser, Jessica; Cornachione, Edgar; Devassy, Seeja Mary; Dhirani, Khalil

    2007-01-01

    Although there are have been some studies on National Human Resource Development and HRD practices in certain countries, literature shows that we have just scratched the surface in terms of the number of countries we know about. This exploratory study reviews research associated with HRD policies and practices in Brazil, China, India, Italy,…

  10. Standardized Evaluation for Multi-National Development Programs.

    ERIC Educational Resources Information Center

    Farrell, W. Timothy

    This paper takes the position that standardized evaluation formats and procedures for multi-national development programs are not only desirable but possible in diverse settings. The key is the localization of standard systems, which involves not only the technical manipulation of items and scales, but also the contextual interpretation of…

  11. The Development and Application of Expert Systems: A National Survey.

    ERIC Educational Resources Information Center

    Bossinger, June; Milheim, William D.

    1993-01-01

    Discussion of expert systems focuses on a national survey that gathered information concerning the attention and investment given to expert systems by managers and computer professionals in a variety of fields. Highlights include uses of expert systems, types of computers and software used, and expert systems shells and development costs. (18…

  12. Great Expectations: Teacher Learning in a National Professional Development Programme

    ERIC Educational Resources Information Center

    Armour, Kathleen M.; Makopoulou, Kyriaki

    2012-01-01

    This paper reports findings from an evaluation of a national continuing professional development (CPD) programme for teachers in England. Data showed that the localised implementation, opportunities for interactive learning, and "collective participation" were positive factors. Research participants reported difficulties, however, in "cascading"…

  13. Impact Evaluation of National Writing Project Professional Development Program

    ERIC Educational Resources Information Center

    Gallagher, H. Alix; Woodworth, Katrina; McCaffrey, Teresa; Park, Christina J.; Wang, Haiwen

    2014-01-01

    Improving teacher effectiveness is a key strategy to ensure student readiness for college and careers and to address achievement gaps and persistent low performance. In response to the new Common Core State Standards for English Language Arts (CCSS-ELA) the National Writing Project (NWP) created a professional development (PD) program to support…

  14. The Development of National Standards for Adult Educators in Namibia

    ERIC Educational Resources Information Center

    Ellis, Justin; Richardson, Brent H.

    2012-01-01

    Since gaining independence from South Africa in 1990, Namibia has placed considerable emphasis on education, including adult learning. As a means of improving the quality of adult learning, the Namibian Ministry of Education commissioned the development of national standards in 2010 to express competency requirements for adult educators.…

  15. National Review of TAFE Teacher Preparation and Development: Discussion Paper.

    ERIC Educational Resources Information Center

    TAFE National Centre for Research and Development, Ltd., Leabrook (Australia).

    A national review of TAFE (Technical and Further Education) teacher preparation and development identified the skills and competencies that will be required of full-time TAFE teachers in the 1990s and those held by present full-time TAFE teachers in Australia. A questionnaire received 594 responses (a 50% response rate). Teachers reported their…

  16. Design and development of linked data from the National Map

    USGS Publications Warehouse

    Usery, E. Lynn; Varanka, Dalia E.

    2012-01-01

    The development of linked data on the World-Wide Web provides the opportunity for the U.S. Geological Survey (USGS) to supply its extensive volumes of geospatial data, information, and knowledge in a machine interpretable form and reach users and applications that heretofore have been unavailable. To pilot a process to take advantage of this opportunity, the USGS is developing an ontology for The National Map and converting selected data from nine research test areas to a Semantic Web format to support machine processing and linked data access. In a case study, the USGS has developed initial methods for legacy vector and raster formatted geometry, attributes, and spatial relationships to be accessed in a linked data environment maintaining the capability to generate graphic or image output from semantic queries. The description of an initial USGS approach to developing ontology, linked data, and initial query capability from The National Map databases is presented.

  17. International Space Station: National Laboratory Education Concept Development Report

    NASA Technical Reports Server (NTRS)

    2006-01-01

    The International Space Station (ISS) program has brought together 16 spacefaring nations in an effort to build a permanent base for human explorers in low-Earth orbit, the first stop past Earth in humanity's path into space. The ISS is a remarkably capable spacecraft, by significant margins the largest and most complex space vehicle ever built. Planned for completion in 2010, the ISS will provide a home for laboratories equipped with a wide array of resources to develop and test the technologies needed for future generations of space exploration. The resources of the only permanent base in space clearly have the potential to find application in areas beyond the research required to enable future exploration missions. In response to Congressional direction in the 2005 National Aeronautics and Space Administration (NASA) Authorization Act, NASA has begun to examine the value of these unique capabilities to other national priorities, particularly education. In early 2006, NASA invited education experts from other Federal agencies to participate in a Task Force charged with developing concepts for using the ISS for educational purposes. Senior representatives from the education offices of the Department of Defense, Department of Education, Department of Energy, National Institutes of Health, and National Science Foundation agreed to take part in the Task Force and have graciously contributed their time and energy to produce a plan that lays out a conceptual framework for potential utilization of the ISS for educational activities sponsored by Federal agencies as well as other future users.

  18. The National Launch System Advanced Development Program: A brief overview

    NASA Technical Reports Server (NTRS)

    Battenburg, J. A.

    1993-01-01

    A broad-based Advanced Development Program is being conducted to modernize the technological base and support the systems design of the National Launch System. While the principal concentration of efforts has been in propulsion, significant work is being accomplished in all of the disciplinary areas associated with space launch. Tasks are selected that offer reduced costs, increased reliability, and enhanced operability with anticipated task completion times which are consistent with NLS development.

  19. IQs Predict Differences in the Technological Development of Nations from 1000 BC through 2000 AD

    ERIC Educational Resources Information Center

    Lynn, Richard

    2012-01-01

    National IQs and measures of technological development given by Comin, Easterly and Gong (2010) are presented for 133 nations for the year 1000 BC, for 134 nations for 0 AD, for 120 nations for 1500 AD and for 133 nations for 2000 AD. It is shown that national IQs are significantly correlated with national differences in technological development…

  20. Dynamic Modeling of Learning in Emerging Energy Industries: The Example of Advanced Biofuels in the United States; NREL (National Renewable Energy Laboratory)

    SciTech Connect

    Peterson, Steve; Bush, Brian; Vimmerstedt, Laura

    2015-07-19

    This paper (and its supplemental model) presents novel approaches to modeling interactions and related policies among investment, production, and learning in an emerging competitive industry. New biomass-to-biofuels pathways are being developed and commercialized to support goals for U.S. advanced biofuel use, such as those in the Energy Independence and Security Act of 2007. We explore the impact of learning rates and techno-economics in a learning model excerpted from the Biomass Scenario Model (BSM), developed by the U.S. Department of Energy and the National Renewable Energy Laboratory to explore the impact of biofuel policy on the evolution of the biofuels industry. The BSM integrates investment, production, and learning among competing biofuel conversion options that are at different stages of industrial development. We explain the novel methods used to simulate the impact of differing assumptions about mature industry techno-economics and about learning rates while accounting for the different maturity levels of various conversion pathways. A sensitivity study shows that the parameters studied (fixed capital investment, process yield, progress ratios, and pre-commercial investment) exhibit highly interactive effects, and the system, as modeled, tends toward market dominance of a single pathway due to competition and learning dynamics.

  1. Solar Photovoltaic Economic Development: Building and Growing a Local PV Industry, August 2011 (Book)

    SciTech Connect

    Not Available

    2011-08-01

    The U.S. photovoltaic (PV) industry is forecast to grow, and it represents an opportunity for economic development and job creation in communities throughout the United States. This report helps U.S. cities evaluate economic opportunities in the PV industry. It serves as a guide for local economic development offices in evaluating their community?s competitiveness in the solar PV industry, assessing the viability of solar PV development goals, and developing strategies for recruiting and retaining PV companies to their areas.

  2. Systems of attitudes towards production in the pork industry. A cross-national study.

    PubMed

    Sørensen, Bjarne Taulo; Barcellos, Marcia Dutra de; Olsen, Nina Veflen; Verbeke, Wim; Scholderer, Joachim

    2012-12-01

    Existing research on public attitudes towards agricultural production systems is largely descriptive, abstracting from the processes through which members of the general public generate their evaluations of such systems. The present paper adopts a systems perspective on such evaluations, understanding them as embedded into a wider attitude system that consists of attitudes towards objects of different abstraction levels, ranging from personal value orientations over general socio-political attitudes to evaluations of specific characteristics of agricultural production systems. It is assumed that evaluative affect propagates through the system in such a way that the system becomes evaluatively consistent and operates as a schema for the generation of evaluative judgments. In the empirical part of the paper, the causal structure of an attitude system from which people derive their evaluations of pork production systems was modelled. The analysis was based on data from a cross-national survey involving 1931 participants from Belgium, Denmark, Germany and Poland. The survey questionnaire contained measures of personal value orientations and attitudes towards environment and nature, industrial food production, food and the environment, technological progress, animal welfare, local employment and local economy. In addition, the survey included a conjoint task by which participants' evaluations of the importance of production system attributes were measured. The data were analysed by means of causal search algorithms and structural equation models. The results suggest that evaluative judgments of the importance of pork production system attributes are generated in a schematic manner, driven by personal value orientations. The effect of personal value orientations was strong and largely unmediated by attitudes of an intermediate level of generality, suggesting that the dependent variables in the particular attitude system that was modelled here can be understood as value

  3. Development of a distributed vision system for industrial conditions

    NASA Astrophysics Data System (ADS)

    Weiss, Michael; Schiller, Arnulf; O'Leary, Paul; Fauster, Ewald; Schalk, Peter

    2003-04-01

    This paper presents a prototype system to monitor a hot glowing wire during the rolling process in quality relevant aspects. Therefore a measurement system based on image vision and a communication framework integrating distributed measurement nodes is introduced. As a technologically approach, machine vision is used to evaluate the wire quality parameters. Therefore an image processing algorithm, based on dual Grassmannian coordinates fitting parallel lines by singular value decomposition, is formulated. Furthermore a communication framework which implements anonymous tuplespace communication, a private network based on TCP/IP and a consequent Java implementation of all used components is presented. Additionally, industrial requirements such as realtime communication to IEC-61131 conform digital IO"s (Modbus TCP/IP protocol), the implementation of a watchdog pattern and the integration of multiple operating systems (LINUX, QNX and WINDOWS) are lined out. The deployment of such a framework to the real world problem statement of the wire rolling mill is presented.

  4. US Energy Industry Financial Developments, 1993 fourth quarter, April 1994

    SciTech Connect

    Not Available

    1994-04-14

    This report traces key financial trends in the US energy industry for the fourth quarter of 1993. Financial data (only available for publicly-traded US companies) are included in two broad groups -- fossil fuel production and rate-regulated electric utilities. All financial data are taken from public sources such as energy industry corporate reports and press releases, energy trade publications, and The Wall Street Journal`s Earnings Digest; return on equity is calculated from data available from Standard and Poor`s Compustat data service. Since several major petroleum companies disclose their income by lines of business and geographic area, these data are also presented in this report. Although the disaggregated income concept varies by company and is not strictly comparable to corporate income, relative movements in income by lines of business and geographic area are summarized as useful indicators of short-term changes in the underlying profitability of these operations. Based on information provided in 1993 fourth quarter financial disclosures, the net income for 82 petroleum companies -- including 18 majors -- was unchanged between the fourth quarter of 1992 and the fourth quarter of 1993. An 18-percent decline in crude oil prices resulted in a deterioration of the performance of upstream (oil and gas production) petroleum companies during the final quarter of 1993. However, prices for refined products fell much less than the price of crude oil, resulting in higher refined product margins and downstream (refining, marketing and transport) petroleum earnings. An increase in refined product demand also contributed to the rise in downstream income.

  5. 77 FR 56191 - National Climate Assessment and Development Advisory Committee (NCADAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-12

    ... National Oceanic and Atmospheric Administration National Climate Assessment and Development Advisory... notice sets forth the schedule of a forthcoming meeting of the DoC NOAA National Climate Assessment and... the National Climate Assessment Web site for additional information at...

  6. 77 FR 61574 - National Climate Assessment and Development Advisory Committee; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-10

    ... National Oceanic and Atmospheric Administration National Climate Assessment and Development Advisory... notice sets forth the schedule of a forthcoming meeting of the DoC NOAA National Climate Assessment and... the National Climate Assessment Web site for additional information at...

  7. The National Biomedical Communications Network as a Developing Structure *

    PubMed Central

    Davis, Ruth M.

    1971-01-01

    The National Biomedical Communications Network has evolved both from a set of conceptual recommendations over the last twelve years and an accumulation of needs manifesting themselves in the requests of members of the medical community. With a short history of three years this network and its developing structure have exhibited most of the stresses of technology interfacing with customer groups, and of a structure attempting to build itself upon many existing fragmentary unconnected segments of a potentially viable resourcesharing capability. In addition to addressing these topics, the paper treats a design appropriate to any network devoted to information transfer in a special interest user community. It discusses fundamentals of network design, highlighting that network structure most appropriate to a national information network. Examples are given of cost analyses of information services and certain conjectures are offered concerning the roles of national networks. PMID:5542912

  8. Development and Validation of National Phenology Data Products

    NASA Astrophysics Data System (ADS)

    Weltzin, J. F.; Rosemartin, A.; Crimmins, T. M.; Gerst, K.

    2015-12-01

    The USA National Phenology Network (USA-NPN; www.usanpn.org) serves science and society by promoting a broad understanding of plant and animal phenology and the relationships among phenological patterns and environmental change. The National Phenology Database (NPDb) maintained by USA-NPN contains almost 6 million in-situ observation records for plants and animals for the period 1954-2015. These data have been used in a number of science, conservation and natural resource management applications, including national assessments of historical and potential future trends in phenology and regional assessments of spatio-temporal variation in organismal activity. Customizable downloads of raw or summarized data, freely available from www.usanpn.org, are accompanied by metadata, data-use and data-attribution policies, published protocols, version/change control, documentation of QA/QC, and links to publications that use historical or contemporary data held in the NPDb. The National Coordinating Office of USA-NPN is developing a suite of standard data products (e.g., quality-controlled raw or summarized status data) and tools (e.g., a new visualization tool released in 2015) to facilitate use and application by a diverse set of data users. This presentation outlines a workflow for the development and validation of spatially gridded phenology products, drawing on recent work related to the Spring Indices now included in two national Indicator systems. In addition, we discuss how we engage observers to collect in-situ data to validate model predictions. Preliminary analyses indicate high fidelity between historical in-situ and modeled observations on a national scale, but with considerable variability at the regional scale. Regions with strong differences between expected and observed data are identified and will be the focus of in-situ data collection campaigns using USA-NPN's Nature's Notebook on-line user interface (www.nn.usanpn.org).

  9. The Garment Industry Development Corporation: A Case Study of a Sectoral Employment Development Approach. Sectoral Employment Development Learning Project Case Studies Series.

    ERIC Educational Resources Information Center

    Conway, Maureen

    The Garment Industry Development Corporation (GIDC) was founded in 1984 by a 3-member partnership that included the local union, industry associations, and local government. GIDC's goal was to support New York City's garment industry, which had been steadily losing jobs. GIDC exhibits the following characteristics of sectoral initiatives: it…

  10. 48 CFR 206.302-3 - Industrial mobilization; or engineering, development, or research capability.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Industrial mobilization; or engineering, development, or research capability. 206.302-3 Section 206.302-3 Federal Acquisition... COMPETITION REQUIREMENTS Other Than Full and Open Competition 206.302-3 Industrial mobilization;...

  11. 48 CFR 206.302-3 - Industrial mobilization; or engineering, development, or research capability.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Industrial mobilization; or engineering, development, or research capability. 206.302-3 Section 206.302-3 Federal Acquisition... COMPETITION REQUIREMENTS Other Than Full and Open Competition 206.302-3 Industrial mobilization;...

  12. College and Institute Affiliations and Relationships with Business and Industry: The College Role in Employee Development.

    ERIC Educational Resources Information Center

    Dinter, Larry

    Creating stronger links between community colleges and industry is likely to be one of the most important tasks in the creation of new industries in Canada and the development of an internationally competitive economy. Existing relations vary from arms-length to working hand in hand, and several projects have been undertaken to encourage closer…

  13. Training for Results; A Systems Approach to the Development of Human Resources in Industry.

    ERIC Educational Resources Information Center

    Warren, Malcolm W.

    Using the systems approach, this book explores training in industry as an organizational tool for developing human resources, and stresses training results and return on investment rather than training programs as such. It is intended as a guide for general managers, personnel and industrial relations directors, and training directors on how…

  14. Needs Assessment for Curriculum Design and Development in the Powdered Metals Industry. Project Number One.

    ERIC Educational Resources Information Center

    Immel, Michael C.; Geroy, Gary D.

    This study, which investigated industry-wide needs for training development in the powdered metals industry, identified the following knowledge areas as those most needed by workers: (1) basic reading and communication skills; (2) basic and algebra mathematical skills; (3) blueprint reading; (4) statistical process control; (5) standard and…

  15. 26 CFR 1.103-10 - Exemption for certain small issues of industrial development bonds.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 26 Internal Revenue 2 2012-04-01 2012-04-01 false Exemption for certain small issues of industrial... Income § 1.103-10 Exemption for certain small issues of industrial development bonds. (a) In general... “exempt small issues”) and bonds issued to refund certain issues (referred to in this section as...

  16. 26 CFR 1.103-10 - Exemption for certain small issues of industrial development bonds.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Exemption for certain small issues of industrial... Income § 1.103-10 Exemption for certain small issues of industrial development bonds. (a) In general... “exempt small issues”) and bonds issued to refund certain issues (referred to in this section as...

  17. 26 CFR 1.103-10 - Exemption for certain small issues of industrial development bonds.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 26 Internal Revenue 2 2011-04-01 2011-04-01 false Exemption for certain small issues of industrial... Income § 1.103-10 Exemption for certain small issues of industrial development bonds. (a) In general... “exempt small issues”) and bonds issued to refund certain issues (referred to in this section as...

  18. 26 CFR 1.103-10 - Exemption for certain small issues of industrial development bonds.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 26 Internal Revenue 2 2013-04-01 2013-04-01 false Exemption for certain small issues of industrial... Income § 1.103-10 Exemption for certain small issues of industrial development bonds. (a) In general... “exempt small issues”) and bonds issued to refund certain issues (referred to in this section as...

  19. 26 CFR 1.103-10 - Exemption for certain small issues of industrial development bonds.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 26 Internal Revenue 2 2014-04-01 2014-04-01 false Exemption for certain small issues of industrial... Income § 1.103-10 Exemption for certain small issues of industrial development bonds. (a) In general... “exempt small issues”) and bonds issued to refund certain issues (referred to in this section as...

  20. A Survey of the U.S. ESCO Industry: Market Growth and Development from 2008 to 2011

    SciTech Connect

    Satchwell, Andrew; Goldman, Charles; Larsen, Peter; Gilligan, Donald; Singer, Terry

    2010-06-08

    In this study, LBNL analyzes the current size of the Energy Service Company (ESCO) industry, industry growth projections to 2011, and market trends in order to provide policymakers with a more indepth understanding of energy efficiency activity among private sector firms. We draw heavily on information from interviews with ESCOs conducted from October 2009 to February 2010 and from our review of publicly available financial information regarding individual ESCOs. A significant ramp-up in energy efficiency activities is occurring at the local, state, and federal level. These activities include the establishment in {approx}18 states of statewide energy savings goals to be obtained from adoption of an Energy Efficiency Resource Standard (EERS), legislative or state regulatory directives to obtain all cost-effective demand-side resources (Barbose et al 2009), and a significant increase in federal funding for energy efficiency programs as part of the American Recovery and Reinvestment Act (ARRA). As part of this increased focus on energy efficiency, policymakers are evaluating the role of private sector companies, including ESCOs, in delivering cost-effective energy savings to end-users. The U.S. ESCO industry has long been recognized for its role in successfully delivering comprehensive energy projects in the public sector. This study analyzes the current size of the ESCO industry, industry growth projections, and market trends in order to provide policymakers with a more in-depth understanding of energy efficiency activity among private sector firms. This study may also be of interest to policymakers abroad who are exploring options to encourage development of a private-sector energy services industry in their own countries. This study draws heavily on information from interviews with ESCOs conducted from October 2009 to February 2010 and is part of a series of ESCO industry reports prepared by Lawrence Berkeley National Laboratory (LBNL) in collaboration with the

  1. Industrial surface coatings: Wood furniture and fixtures emission inventory development. Final report

    SciTech Connect

    Anex, R.P.; Lund, J.R.; Chang, D.P.Y.

    1998-06-01

    The purpose of this study is to update the methods for estimating emissions from the industrial coatings subcategory of wood furniture and fixtures. The wood furniture and fixture industry encompasses the manufacture of diverse products including cabinets, office furniture, store fixtures, and residential furniture. Specific objectives of this work are to: (1) estimate the amount of coating used in the industrial surface coating of wood furniture and fixtures; (2) develop emissions factors for each coating application category; (3) estimate variability of both coating use and emission factors; and (4) specify a source of information and method to revise and update the industrial coating of wood furniture and fixtures emission inventory.

  2. Occupational and environmental health problems of the developing oil shale industry: a review

    SciTech Connect

    Rom, W.N.; Lee, J.S.; Craft, B.F.

    1981-01-01

    The American oil shale industry is on the threshold of commercial industrial development. Potential occupational hazards include shalosis or oil shale pneumoconiosis, dermatoses, cancer of the skin, lung, and possibly other sites, and accidents. Air, water, and solid waste pollution problems are complicated by the aridity of the Green River oil shale formation located in Utah, Colorado, and Wyoming. The region currently lacks the schools, health facilities, community services, and skilled labor required for large-scale development. The oil shale industry faces an opportunity and a challenge of prudently assessing and controlling exposures and contributing to the social development of the region.

  3. Occupational and environmental health problems of the developing oil shale industry: a review.

    PubMed

    Rom, W N; Lee, J S; Craft, B F

    1981-01-01

    The American oil shale industry is on the threshold of commercial industrial development. Potential occupational hazards include shalosis or oil shale pneumoconiosis, dermatoses, cancer of the skin, lung, and possibly other sites, and accidents. Air, water, and solid waste pollution problems are complicated by the aridity of the Green River oil shale formation located in Utah, Colorado, and Wyoming. The region currently lacks the schools, health facilities, community services, and skilled labor required for large-scale development. The oil shale industry faces an opportunity and a challenge of prudently assessing and controlling exposures and contributing to the social development of the region.

  4. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 2

    SciTech Connect

    Miller, Bruce; Winton, Shea

    2010-12-31

    Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or ~28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to the

  5. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 1

    SciTech Connect

    Miller, Bruce; Winton, Shea

    2010-12-31

    Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or ~28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to the

  6. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 3

    SciTech Connect

    Miller, Bruce; Shea, Winton

    2010-12-31

    Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or ~28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to the

  7. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 5

    SciTech Connect

    Miller, Bruce; Shea, Winton

    2010-12-31

    Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or {approx}28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to

  8. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 4

    SciTech Connect

    Miller, Bruce; Shea, Winton

    2010-12-31

    Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or {approx}28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to

  9. Government-industry-uUniversity and rResearch lLaboratories cCoordination for new product development: Session 2. Government research laboratory perspective

    SciTech Connect

    Kuzay, T.M.

    1997-09-01

    This talk is the second in an expanded series of presentations on the Government-Industry-University and Research Laboratories Coordination for new product development, which is a timely and important public policy issue. Such interactions have become particularly timely in light of the present decline in funding for research and development (R&D) in the nation`s budget and in the private sector. These interactions, at least in principle, provide a means to maximize benefits for the greater good of the nation by pooling the diminishing resources. National laboratories, which traditionally interacted closely with the universities in educational training, now are able to also participate closely with industry in joint R&D thanks to a number of public laws legislated since the early 80s. A review of the experiences with such interactions at Argonne National Laboratory, which exemplifies the national laboratories, shows that, despite differences in their traditions and the missions, the national laboratory-industry-university triangle can work together.

  10. Industrial diamond

    USGS Publications Warehouse

    Olson, D.W.

    2001-01-01

    An overview of the industrial diamond industry is provided. More than 90 percent of the industrial diamond consumed in the U.S. and the rest of the world is manufactured diamond. Ireland, Japan, Russia, and the U.S. produce 75 percent of the global industrial diamond output. In 2000, the U.S. was the largest market for industrial diamond. Industrial diamond applications, prices for industrial diamonds, imports and exports of industrial diamonds, the National Defense Stockpile of industrial diamonds, and the outlook for the industrial diamond market are discussed.

  11. Legal risk management and injury in the fitness industry: the outcomes of focus group research and a national survey of fitness professionals.

    PubMed

    Keyzer, Patrick; Coyle, Ian R; Dietrich, Joachim; Norton, Kevin; Sekendiz, Betul; Jones, Veronica; Finch, Caroline F

    2014-06-01

    The Australian Fitness Industry Risk Management (AFIRM) Project was set up to explore the operation of rules and regulations for the delivery of safe fitness services. This article summarises the results of recent focus group research and a national survey of risk management practices by the AFIRM Project. Our focus group research in four States identified the following most important concerns: (1) the competency of fitness professionals; (2) the effectiveness of pre-exercise screening and the management of de-conditioned clients; (3) poor supervision of fitness service users and incorrect use of equipment; (4) fitness trainers failing to remain within their scope of practice; (5) equipment misuse (as distinct from incorrect use); and (6) poor fitness training environments. This information was then used to develop 45 specific items for a questionnaire that was disseminated throughout the fitness industry. The survey, which is the largest ever conducted in the Australian fitness industry (n = 1,178), identified similar concerns. Our research indicates that efforts to improve risk management in the fitness industry should focus, first and foremost, on the development and monitoring of safety policy, and improvements in the education and training of fitness instructors to ensure that they can incorporate risk management practices.

  12. The Challenge of Change. National Printing Industry Training Council Training Plan.

    ERIC Educational Resources Information Center

    Cesnich, J.; And Others

    Principally concerned with printing, publishing, and paper and paper products, the Australian printing industry is segmented into two sectors: general production and specialist (concerned with a variety of processes and products.) Current arrangements for entry-level training in the industry generally consist of off-the-job training usually…

  13. 77 FR 55698 - National Emission Standards for Hazardous Air Pollutants From the Pulp and Paper Industry

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-11

    ... for the pulp and paper industry was promulgated on April 15, 1998 (63 FR 18504). The standards are... uncertainties discussed in the proposal preamble (76 FR 81338-40), the risks from the pulp and paper source... Pulp and Paper Industry AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule....

  14. National Policies and strategies on science and technology for development.

    PubMed

    Ayob, A

    1979-01-01

    Malaysia's economy continues to be dependent upon the primary producing sectors, based on the exploitation or use of her natural resources. At this Malaysia is the world's largest exporter of natural rubber, tin, tropical hardwoods and palm oil. There is still wide scope for developing new application of science and technology in the rubber industry, and the scope remains even wider in other agricultural sectors. In order to accelerate development in the traditional agricultural sector, that is, those related to food production, the Malaysian Agricultural Research and Development Institute (MARDI) was established in 1970 to undertake research in the development of crops other than rubber. Progress has been relatively slow in the development of agriculture. In forestry much work needs to be done in the application of science and technology to forest management, logging, timber utilization, silviculture and the related field of forest regeneration, tree breeding, forest protection and soil conservation. Further development of the mining sector calls for the application of new technology both in prospecting for new sources of minerals and in exploitation. Development of off-shore technology will become increasingly important. Although a major sector in resources development is energy, there is, as yet, no energy policy. Structural diversification is recognized as a basic need for the economic development of Malaysia. Malaysia will have a great demand for trained scientific and technological personnel. PMID:12261806

  15. National Policies and strategies on science and technology for development.

    PubMed

    Ayob, A

    1979-01-01

    Malaysia's economy continues to be dependent upon the primary producing sectors, based on the exploitation or use of her natural resources. At this Malaysia is the world's largest exporter of natural rubber, tin, tropical hardwoods and palm oil. There is still wide scope for developing new application of science and technology in the rubber industry, and the scope remains even wider in other agricultural sectors. In order to accelerate development in the traditional agricultural sector, that is, those related to food production, the Malaysian Agricultural Research and Development Institute (MARDI) was established in 1970 to undertake research in the development of crops other than rubber. Progress has been relatively slow in the development of agriculture. In forestry much work needs to be done in the application of science and technology to forest management, logging, timber utilization, silviculture and the related field of forest regeneration, tree breeding, forest protection and soil conservation. Further development of the mining sector calls for the application of new technology both in prospecting for new sources of minerals and in exploitation. Development of off-shore technology will become increasingly important. Although a major sector in resources development is energy, there is, as yet, no energy policy. Structural diversification is recognized as a basic need for the economic development of Malaysia. Malaysia will have a great demand for trained scientific and technological personnel.

  16. Developing a chemicals/fuels industry from renewable resources

    SciTech Connect

    Villet, R.H.

    1981-01-01

    With the increasing cost and scarcity of nonrenewable resources, the motivation for substituting biomass-derived chemicals for certain key petro-chemicals is likely to grow. Two goals for research and development are recommended: 1) a near-term objective to revive the older fermentation technology based on readily fermentable substrates and to reduce the cost of production to a competetive level; and 2) the longer-term development of a new biotechnology for producing chemicals and fuels efficiently from biomass of various kinds. Current developments in this area are reviewed. (Refs. 28).

  17. A national research & development strategy for biomass crop feedstocks

    SciTech Connect

    Wright, L.L.; Cushman, J.H.

    1997-07-01

    Planning was initiated in 1996 with the objective of reevaluating current biomass feedstock research and development strategies to: (1) assure that by 2005, one or more commercial lignocellulosic to ethanol projects will be able to acquire a dependable supply of biomass crop feedstocks; (2) assure that recently initiated demonstrations of crops to electricity will be successful and; (3) assure that the research base needed to support future biomass industry expansion is being developed. Multiple trends and analyses indicate that biomass energy research and development strategies must take into account the fact that competition for land will define the upper limits of available biomass energy crop supplies and will largely dictate the price of those supplies. Only crop production and utilization strategies which contribute profit to the farmer or landowner and to energy producers will be used commercially for biomass energy production. Strategies for developing biomass {open_quotes}energy{close_quotes} crop supplies must take into consideration all of the methods by which biomass crops will enter biomass energy markets. The lignocellulosic materials derived from crops can be available as primary residues or crop by-products; secondary residues or processing by-products; co-products (at both the crop production and processing stages); or, as dedicated energy crops. Basic research and development (R&D) leading to yield improvement continues to be recommended as a major long-term focus for dedicated energy crops. Many additional near term topics need attention, some of which are also applicable to by-products and co-products. Switchgrass R&D should be expanded and developed with greater collaboration of USDA and state extension groups. Woody crop research should continue with significant cost-share from industries developing the crops for other commercial products. Co-product options need more investigation.

  18. Irritable Bowel Syndrome and Gastrointestinal Parasite Infection in a Developing Nation Environment

    PubMed Central

    Morgan, Douglas R.; Benshoff, Matthew; Cáceres, Mercedes; Becker-Dreps, Sylvia; Cortes, Loreto; Martin, Christopher F.; Schmulson, Max; Peña, Rodolfo

    2012-01-01

    Postinfectious IBS is defined in the industrialized world as IBS onset following a sentinel gastrointestinal infection. In developing nations, where repeated bacterial and parasitic gastrointestinal infections are common, the IBS pathophysiology may be altered. Our aim was to investigate the relationship between intestinal parasite infection and IBS in the “nonsterile” developing world environment. IBS subjects were identified from a population-based sample of 1624 participants using the Rome II Modular Questionnaire. Stool samples from cases and randomly selected controls were examined for ova and parasites. Logistic regression models explored the relationship between IBS and parasite infection. The overall IBS prevalence among participants was 13.2% (9.3% males, 15.9% females). There was no difference in parasite carriage between IBS cases and controls, 16.6% versus 15.4% (P = 0.78), nor among IBS subtypes. The pathophysiology of post-infectious IBS may be altered in the developing world as compared to industrialized nations and warrants investigation. PMID:22474433

  19. Industry Perspective of Drug Development for Pregnant/Breastfeeding Women.

    PubMed

    Korth-Bradley, J M

    2016-07-01

    As part of drug development, drug companies conduct experiments to gather data about the potential toxicity of medications in pregnant and lactating animals. Increasingly, physiologically based pharmacokinetic models are developed to simulate drug concentrations in pregnant and lactating women. As these women are not usually included in clinical trials, targeted postapproval safety monitoring, registries, or clinical studies may be performed to gather safety and efficacy information about drug use in these special populations. PMID:27082822

  20. National health accounts in developing countries: appropriate methods and recent applications.

    PubMed

    Berman, P A

    1997-01-01

    Better information on the financing of the health sector is an essential basis for wise policy change in the area of health sector reform. Analysis of health care financing should begin with sound estimates of national health expenditure--total spending, the contributions to spending from different sources and the claims on spending by different uses of the funds. The member countries of the OECD have successfully established such comparative health expenditure accounts in terms of standardized definitions of the uses of funds and breakdowns by public and private sector sources. This has resulted in important research on health system differences which could explain variations in the level and composition of financing. The United States has developed a more detailed approach called National Health Accounts, which expands the OECD method into a more disaggregated 'sources and uses' matrix. In the developing countries, analysis of health expenditures has been much less systematic, despite several decades of calls by international researchers for more attention. This paper reviews previous work done in developing countries and proposes renewed attention to national health expenditures, adapting the recent experience of the United States. Because most developing countries have more pluralistic health financing structures than are found in most industrialized countries, an enhanced and adapted version of the 'sources and uses' matrix method is proposed. This method should be modified to address the relevant categories of expenditures prevalent in the developing countries. Examples of recent applications of such 'national health accounts' from the Philippines, Egypt, India, Mexico, Colombia and Zambia are presented. Experience to date suggests that development of sound estimates using this method in low and middle income countries is feasible and affordable. National health accounts estimates can significantly influence policy. They provide decision makers with a