Synthesis, properties, crystal structures, and semiconductor characteristics of naphtho[1,2-b:5,6-b']dithiophene and -diselenophene derivatives.

PubMed

Shinamura, Shoji; Miyazaki, Eigo; Takimiya, Kazuo

2010-02-19

In this paper we present the synthesis, structures, characterization, and applications to field-effect transistors (FETs) of naphtho[1,2-b:5,6-b']dithiophene (NDT) and -diselenophene (NDS) derivatives. Treatment of 1,5-dichloro-2,6-diethynylnaphthalenes, easily derived from commercially available 2,6-dihydroxynaphthalene, with sodium chalcogenide afforded a straightforward access to NDTs and NDSs including the parent and dioctyl and diphenyl derivatives. Physicochemical evaluations of NDT and NDS derivatives showed that these heteroarenes have a similar electronic structure with isomeric [1]benzothieno[2,3-b][1]benzothiophene (BTBT) and [1]benzoselenopheneno[2,3-b][1]benzoselenophene (BSBS) derivatives, respectively. Although attempts to fabricate solution-processed field-effect transistors (FETs) with soluble dioctyl-NDT (C(8)-NDT) and -NDS (C(8)-NDS) failed, diphenyl derivatives (DPh-NDT and DPh-NDS) afforded vapor-processed FETs showing field-effect mobility as high as 0.7 cm(2) V(-1) s(-1). These results indicated that NDT and NDS are new potential heteroarene core structures for organic semiconducting materials.

Transition process from emerging NDT technology to production inspection application

NASA Astrophysics Data System (ADS)

Jappe, William; Wood, Nancy; Johnson, Maurice

1995-07-01

The successful application of emerging NDT technologies for specific aging aircraft inspections requires an integration of efforts between aircraft operators, airframe manufacturers, NDT equipment designers, and government regulators. This paper describes the development process that was followed to establish an alternate inspection technique for a DC-10 crown skin butt joint inspection. Initial investigation, intermediate development, and final evaluations are discussed.

Analysis of Within-Test Variability of Non-Destructive Test Methods to Evaluate Compressive Strength of Normal Vibrated and Self-Compacting Concretes

NASA Astrophysics Data System (ADS)

Nepomuceno, Miguel C. S.; Lopes, Sérgio M. R.

2017-10-01

Non-destructive tests (NDT) have been used in the last decades for the assessment of in-situ quality and integrity of concrete elements. An important step in the application of NDT methods concerns to the interpretation and validation of the test results. In general, interpretation of NDT results should involve three distinct phases leading to the development of conclusions: processing of collected data, analysis of within-test variability and quantitative evaluation of property under investigation. The analysis of within-test variability can provide valuable information, since this can be compared with that of within-test variability associated with the NDT method in use, either to provide a measure of the quality control or to detect the presence of abnormal circumstances during the in-situ application. This paper reports the analysis of the experimental results of within-test variability of NDT obtained for normal vibrated concrete and self-compacting concrete. The NDT reported includes the surface hardness test, ultrasonic pulse velocity test, penetration resistance test, pull-off test, pull-out test and maturity test. The obtained results are discussed and conclusions are presented.

Initiatives to Improve Quality of Additively Manufactured Parts

NASA Technical Reports Server (NTRS)

Waller, Jess; Nichols, Charles

2017-01-01

NASA is providing leadership in an international effort linking government and industry resources to speed adoption of additive manufactured (AM) parts. Participants include government agencies (NASA, USAF, NIST, FAA), industry (commercial aerospace, NDE manufacturers, AM equipment manufacturers), standards organizations and academia. NASA is also partnering with its international space exploration organizations such as ESA and JAXA. NDT is identified as a universal need for all aspects of additive manufacturing.

Simulation assisted pod of a phased array ultrasonic inspection in manufacturing

NASA Astrophysics Data System (ADS)

Dominguez, N.; Feuillard, V.; Jenson, F.; Willaume, P.

2012-05-01

The concept of Probability of Detection (POD) is generally used to quantitatively assess performances and reliability of NDT operations for in-service operations related to damage tolerant designs. Application of the POD approach as a metric for manufacturing NDT assessment would also be relevant but the very expensive cost of such campaigns generally prevents us from doing so. However the increase in NDT simulation capability and maturity opens the field for POD demonstrations for manufacturing NDT with the help of simulation. This paper presents the example of an automated phased array ultrasonic testing procedure of Electron Beam Welding on rotative parts, as part of the PICASSO European project. POD is calculated by using the uncertainty propagation approach in CIVA. The peculiarity of uncertainties in automated NDT compared to in-service manual operations is discussed and raises questions on appropriate statistics to be used for this kind of data. Alternative estimation techniques like Box-Cox transform or quantile regression are proposed and evaluated.

High Sensitivity, One-Sided X-Ray Inspection System.

DTIC Science & Technology

1985-07-01

8217. X-Ray Imaging Quantitative NDT One-Sided Inspection Backs cat ter De laminat ions .. Nondestructive Testing (NDT) Rocket Motor Case NDT ’j 20...epoxy composites and other low atomic number materials have been detected. Wall thick nesses up to 7 cm thick have been interrogated. The results show...fiber composite rocket motor pressure vessels, the anticipated backscatter x-ray instrument will offer high sensitivity (contact delaminations have

Rhythmic auditory stimulation improves gait more than NDT/Bobath training in near-ambulatory patients early poststroke: a single-blind, randomized trial.

PubMed

Thaut, M H; Leins, A K; Rice, R R; Argstatter, H; Kenyon, G P; McIntosh, G C; Bolay, H V; Fetter, M

2007-01-01

The effectiveness of 2 different types of gait training in stroke rehabilitation, rhythmic auditory stimulation (RAS) versus neurodevelopmental therapy (NDT)/Bobath- based training, was compared in 2 groups of hemiparetic stroke patients over a 3-week period of daily training (RAS group, n = 43; NDT/Bobath group =35). Mean entry date into the study was 21.3 days poststroke for the RAS group and 22.3 days for the control group. Patients entered the study as soon as they were able to complete 5 stride cycles with handheld assistance. Patients were closely equated by age, gender, and lesion site. Motor function in both groups was pre-assessed by the Barthel Index and the Fugl-Meyer Scales. Pre- to posttest measures showed a significant improvement in the RAS group for velocity (P = .006), stride length (P = .0001), cadence (P = .0001) and symmetry (P = .0049) over the NDT/Bobath group. Effect sizes for RAS over NDT/Bobath training were 13.1 m/min for velocity, 0.18 m for stride length, and 19 steps/min for cadence. The data show that after 3 weeks of gait training, RAS is an effective therapeutic method to enhance gait training in hemiparetic stroke rehabilitation. Gains were significantly higher for RAS compared to NDT/Bobath training.

An estimation methode for measurement of ultraviolet radiation during nondestructive testing

NASA Astrophysics Data System (ADS)

Hosseinipanah, M.; Movafeghi, A.; Farvadin, D.

2018-04-01

Dye penetrant testing and magnetic particle testing are among conventional NDT methods. For increased sensitivity, fluorescence dyes and particles can be used with ultraviolet (black) lights. UV flaw detection lights have different spectra. With the help of photo-filters, the output lights are transferred to UV-A and visible zones. UV-A light can be harmful to human eyes in some conditions. In this research, UV intensity and spectrum were obtained by a Radio-spectrometer for two different UV flaw detector lighting systems. According to the standards such as ASTM E709, UV intensity must be at least 10 W/m2 at a distance of 30 cm. Based on our measurements; these features not achieved in some lamps. On the other hand, intensity and effective intensity of UV lights must be below the some limits for prevention of unprotected eye damage. NDT centers are usually using some type of UV measuring devices. A method for the estimation of effective intensity of UV light has been proposed in this research.

Assigning Treatment to HCC Patients for Transplantation: Utility of a New Decision-Making Tool.

PubMed

Shah, Najmul Hassan; Dar, Faisal Saud; Bhatti, Abu Bakar Hafeez; Rana, Atif; Salih, Mohammad

2016-10-28

BACKGROUND The Barcelona clinic liver cancer (BCLC) staging system is considered the standard of care for hepatocellular carcinoma (HCC) management. It has various limitations, including lack of second-line treatment options and combination therapy. We prospectively collected data on our HCC patients based on a new decision-making tool (NDT). The objective of this study was to determine the applicability of this tool and compare it with BCLC for treatment allocation, in particular with respect to liver transplantation. MATERIAL AND METHODS We retrospectively reviewed HCC patients who were managed based on an NDT that was developed in 2012. All patients whose treatment decision was based on this tool between 2012 and 2015 were included. Comparison was made with BCLC. Survival was compared for patients who underwent liver transplantation. RESULTS Based on the NDT, 406 (40.6%) patients were eligible for curative treatment versus only 22 (2.2%) patients based on BCLC. A total of 58 (5.8%) patients underwent liver transplant based on the NDT, while only 2 (0.2%) were transplantable based on BCLC. Estimated 3-year survival for transplanted patients based on the NDT was 73%. There were 41 (4.1%) stage C and 15 (1.5%) stage D BCLC patients who received transplant based on the NDT. Estimated 3-year survival for stage A, C, and D BCLC patients who received transplantation was 100%,72%, and 67%, respectively (P=0.6). CONCLUSIONS The NDT correctly identified a group of HCC patients for liver transplantation who would otherwise have received palliative treatment based on the BCLC algorithm.

Application of Micro-Electro-Mechanical Sensors Contactless NDT of Concrete Structures.

PubMed

Ham, Suyun; Popovics, John S

2015-04-17

The utility of micro-electro-mechanical sensors (MEMS) for application in air-coupled (contactless or noncontact) sensing to concrete nondestructive testing (NDT) is studied in this paper. The fundamental operation and characteristics of MEMS are first described. Then application of MEMS sensors toward established concrete test methods, including vibration resonance, impact-echo, ultrasonic surface wave, and multi-channel analysis of surface waves (MASW), is demonstrated. In each test application, the performance of MEMS is compared with conventional contactless and contact sensing technology. Favorable performance of the MEMS sensors demonstrates the potential of the technology for applied contactless NDT efforts. To illustrate the utility of air-coupled MEMS sensors for concrete NDT, as compared with conventional sensor technology.

The Role of NDT in Forensic Engineering

NASA Astrophysics Data System (ADS)

Leon-Salamanca, Teodoro

2007-03-01

Forensic engineering refers to a comprehensive investigation of the root cause of failures in structures and operating equipment, usually dealing with the relation and application of engineering facts to legal problems and product liability. The first and often most critical step is to use NDT to fully define the size, shape, and possible nature of all defects in the failed item prior to performing destructive tests. An example of a case where NDT played a critical role is presented.

Effects of neuromuscular electrical stimulation and Kinesio Taping applications in children with cerebral palsy on postural control and sitting balance.

PubMed

Elbasan, Bulent; Akaya, Kamile Uzun; Akyuz, Mufit; Oskay, Deran

2018-02-06

Neurodevelopmental treatment (NDT), neuromuscular electrical stimulation (NMES), and Kinesio Taping (KT) applications are separately used to improve postural control and sitting balance in children with cerebral palsy (CP). The aim of this study is to examine the combined effect of NDT, NMES and KT applications on postural control and sitting balance in children with CP. Forty five children, in 3 groups, between the ages 5-12 years were included in the study. Group 1 received NDT; group 2 received NDT + NMES; and the group 3 received NDT + NMES + KT for 6 weeks. Sitting function evaluated by the sitting section of the gross motor function measure (GMFM), and postural control assessed with the seated postural control measurement (SPCM). Seating section of GMFM was improved significantly in all the groups; however, increases in the group 3 were higher than groups 1 and 2 (p= 0.001). While significant differences were observed in all groups in the SPCM posture (p< 0.001), function (p< 0.001), and the total scores (p< 0.001); the change in the third group was higher according to the comparison of the three groups within each other. Implementation of the NMES, and KT additionally to NDT improve the sitting posture, postural control, seating function, and gross motor function in children with CP.

Predicted RNA Binding Proteins Pes4 and Mip6 Regulate mRNA Levels, Translation, and Localization during Sporulation in Budding Yeast.

PubMed

Jin, Liang; Zhang, Kai; Sternglanz, Rolf; Neiman, Aaron M

2017-05-01

In response to starvation, diploid cells of Saccharomyces cerevisiae undergo meiosis and form haploid spores, a process collectively referred to as sporulation. The differentiation into spores requires extensive changes in gene expression. The transcriptional activator Ndt80 is a central regulator of this process, which controls many genes essential for sporulation. Ndt80 induces ∼300 genes coordinately during meiotic prophase, but different mRNAs within the NDT80 regulon are translated at different times during sporulation. The protein kinase Ime2 and RNA binding protein Rim4 are general regulators of meiotic translational delay, but how differential timing of individual transcripts is achieved was not known. This report describes the characterization of two related NDT80 -induced genes, PES4 and MIP6 , encoding predicted RNA binding proteins. These genes are necessary to regulate the steady-state expression, translational timing, and localization of a set of mRNAs that are transcribed by NDT80 but not translated until the end of meiosis II. Mutations in the predicted RNA binding domains within PES4 alter the stability of target mRNAs. PES4 and MIP6 affect only a small portion of the NDT80 regulon, indicating that they act as modulators of the general Ime2/Rim4 pathway for specific transcripts. Copyright © 2017 American Society for Microbiology.

Overview of recent Japanese activities in thermographic NDT

NASA Astrophysics Data System (ADS)

Sakagami, Takahide; Ogura, Keiji

1997-04-01

In the past decade, nondestructive testing techniques using infrared thermography, i.e., thermographic NDT techniques, received a lot of attention in many engineering fields in Japan. The first national symposium that specialized in thermographic NDT techniques was held in Tokyo, Japan on November 28-29, 1995, organized by the Research and Technical Committee on Surface Method of the Japanese Society for Nondestructive Inspection (JSNDI). At this symposium, twenty eight presentations including two keynote addresses were given. Over three hundred thermography researchers and engineers (thermographers) attended the symposium. Further, an exhibition of newly developed equipment for infrared thermography featuring the equipment of eleven companies took place concurrently. This symposium played an important role as the first national symposium dedicated to sharing information, ideas and experiences about thermographic NDT among thermographers from both the user and supplier sides. Sessions within the symposium were as follows: Advances in Infrared Imaging Systems; Applications for Composite Materials and Coated Materials; Diagnosis of Equipment/Monitoring, Applications for Structural Materials; Backup Techniques for Thermographic NDT; Infrared Stress Measurement and Contact Problems. This paper briefly describes presentations given in the symposium.

"The effects of family-centered physiotherapy on the cognitive and motor performance in premature infants".

PubMed

Elbasan, Bulent; Kocyigit, Murat Fatih; Soysal-Acar, A Sebnem; Atalay, Yıldız; Gucuyener, Kivilcim

2017-11-01

The aim of this study is to investigate the effects of family centered physiotherapy according to the neurodevelopmental treatment (NDT) principles on mental and motor performance in premature infants. A total of 156 infant, ≥24/36 week+6days gestational age included in the study. All the infants were diagnosed by a child neurologist and referred to psychology and physiotherapy department for their neurodevelopmental assessment and treatment. Bayley Scale of Infant II (BSI-II) was used for neurodevelopmental assessment and Alberta Infant Motor Scale (AIMS) was used for assessing their motor performance. Seventy-eight of the infants were in the study group and 76 were recruited as age matched controls according to the classification of their gestational age. Family centered physiotherapy according to the neurodevelopmental treatment principles was used as an intervention and all the mothers are trained accordingly. Cognitive Development Scores and Motor Development Scores of Bayley II were recorded for the 3., 6., 9., and 12 months respectively. Between the 3. and 12. month of gestational age, within-groups measurements in both Cognitive Development Scores (p<0.001) and Motor Development Scores (p<0.001) were significantly increased. However, the improvements in both Cognitive Development Scores (p=0.059) and Motor Development Scores (p=0.334) between the groups was not different. Family centered physiotherapy with NDT principles may not be enough to improve motor and cognitive performance in preterm infants at the first year of age. For supporting the motor and cognitive development of the preterm infants other intervention modalities also should be considered. Copyright © 2017 Elsevier Inc. All rights reserved.

Non-destructive testing (NDT) of metal cracks using a high Tc rf-SQUID and eddy current method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, D.F.; Fan, C.; Ruan, J.Z.

1994-12-31

A SQUID is the most sensitive device to detect change in magnetic field. A non-destructive testing (NDT) device using high temperature SQUIDs and eddy current method will be much more sensitive than those currently used eddy current systems, yet much cheaper than one with low temperature SQUIDs. In this paper, we present our study of such a NDT device using a high temperature superconducting rf-SQUID as a gradiometer sensor. The result clearly demonstrates the expected sensitivity of the system, and indicates the feasibility of building a portable HTS SQUID NDT device with the help from cryocooler industry. Such a NDTmore » device will have a significant impact on metal corrosion or crack detection technology.« less

A Review of Optical NDT Technologies

PubMed Central

Zhu, Yong-Kai; Tian, Gui-Yun; Lu, Rong-Sheng; Zhang, Hong

2011-01-01

Optical non-destructive testing (NDT) has gained more and more attention in recent years, mainly because of its non-destructive imaging characteristics with high precision and sensitivity. This paper provides a review of the main optical NDT technologies, including fibre optics, electronic speckle, infrared thermography, endoscopic and terahertz technology. Among them, fibre optics features easy integration and embedding, electronic speckle focuses on whole-field high precision detection, infrared thermography has unique advantages for tests of combined materials, endoscopic technology provides images of the internal surface of the object directly, and terahertz technology opens a new direction of internal NDT because of its excellent penetration capability to most of non-metallic materials. Typical engineering applications of these technologies are illustrated, with a brief introduction of the history and discussion of recent progress. PMID:22164045

STA-2A NDT testing

NASA Technical Reports Server (NTRS)

Lewis, T. J.

1987-01-01

The nondestructive testing (NDT) on the Space Shuttle Solid Rocket Booster (SRB) filament wound case (FWC) short stact structural test articles 2 (STA-2A) during test of phases 1B-9C is described. The primary objective of this testing was to verify the structural integrity of the SRB-FWC for critical design loads. Another objective was to quantify the effect of load distributions in the aft skirt. The NDT objectives were to determine the acoustic emission characteristics of the FWC-SRB and to identify possible design deficiencies or defect growth. The results from the posttest inspection of the samples shows the depth measurements taken were accurate until exceeding .260 inches thickness. The data then show that pulse echo measurements exceeded actual part thickness by 10 to 14 percent. The mapping of forward boundaries of delaminations proved to be within the tolerance of the equipment. Using the ZIP probe, the maximum difference between the pulse echo boundary and the visual boundary was expected to be no greater than one half the diameter of the probe. The NDT performance on STA-2A shows how NDT can be used to assist design engineering in evaluating the structural integrity of composite test articles.

The effects of Nintendo Wii(TM)-based balance and upper extremity training on activities of daily living and quality of life in patients with sub-acute stroke: a randomized controlled study.

PubMed

Şimşek, Tülay Tarsuslu; Çekok, Kübra

2016-12-01

The aim of this study was to investigate the effects of Nintendo Wii(TM)-based balance and upper extremity training on activities of daily living and quality of life in patients with subacute stroke. 42 adults with stroke (mean age (SD) = 58.04 (16.56) years and mean time since stroke (SD) = (55.2 ± 22.02 days (∼8 weeks)) were included in the study. Participants were enrolled from the rehabilitation department of a medical center (a single inpatient rehabilitation facility). Participants were randomly assigned to Nintendo Wii group (n = 20) or Bobath neurodevelopmental treatment (NDT) (n = 22). The treatments were applied for 10 weeks (45-60 minutes/day, 3 days/week) for both of two groups. Nintendo Wii group used five games selected from the Wii sports and Wii Fit packages for upper limb and balance training, respectively. The patients in Bobath NDT group were applied a therapy program included upper extremity activites, strength, balance gait and functional training. The functional independence in daily life activities and health-related quality of life was assessed with Functional Independence Measure (FIM) and Nottingham Health Profile (NHP), respectively. Participant's treatment satisfaction was recorded by using Visual Analogue Scale. A second evaluation (FIM and NHP) occurred after 10 weeks at the end of rehabilitative treatment (post-training). Treatment satisfaction was measured after 10 sessions. There were significant difference between FIM and NHP values in NDT and Nintendo Wii group (p < 0.05). However, a significant difference was not found between the groups with regard to FIM and NHP (p > 0.05). The patients in Nintendo Wii group were detected to be better satisfied from the therapy (p < 0.05). A significant difference was found between subparameters and total FIM score, all subparameters and total NHP score in both groups (p < 0.05). These findings suggested that the Nintendo Wii training was as effective as Bobath NDT on daily living functions and quality of life in subacute stroke patients.

NDT standards from the perspective of the Department of Defense

NASA Astrophysics Data System (ADS)

Strauss, Bernard

1992-09-01

The interaction of the DoD non-Government Society (NGS) bodies in the area of nondestructive testing (NDT) are illustrated. The adoption process for NGS is outlined including the criteria for adoption, what adoption means, and the advantages of DoD/NGS interaction. The tasks of the DoD's Standardization Program Plan for NDT are described along with DoD's efforts on a Joint Army, Navy, Air Force (JANNAF) NDE Subcommittee and on an international standardization group (America, Britain, Canada, and Australia) called the Quadripartite Working Group on Proofing, Inspection, and Quality Assurance.

Applications of laser ultrasound NDT methods on composite structures in aerospace industry

NASA Astrophysics Data System (ADS)

Kalms, Michael; Focke, Oliver; v. Kopylow, Christoph

2008-09-01

Composite materials are used more and more in aircraft production. Main composite types are Carbon Fiber Reinforced Plastics (CFRP), Glass Fiber Reinforced Plastics (GFRP) and metal-aluminium laminates (e. g. Glass Fiber Aluminium Reinforced GLARE©). Typical parts made of CFRP material are flaps, vertical and horizontal tail planes, center wing boxes, rear pressure bulkheads, ribs and stringers. These composite parts require adequate nondestructive testing (NDT) methods. Flaws to be detected are delaminations and debondings, porosity and foreign body inclusion. Manual ultrasonic testing with single element transducers is still the most applied method for composite parts with small and medium size. The extension of the conventional ultrasound technique for nondestructive testing with the laser ultrasound method brings new possibilities into the production processes for example the inspection of complex CFRP-components and the possibilities of online observation under remote control. In this paper we describe the principle of laser ultrasound with respect to the demands of nondestructive testing especially of small complex CFRP and C/PPS parts. We report applications of laser-based ultrasound options with generated types of guided and bulk waves on modern aircraft materials.

Conjugated foldamers with unusually high space-charge-limited current hole mobilities.

PubMed

Li, Yong; Dutta, Tanmoy; Gerasimchuk, Nikolay; Wu, Shijie; Shetye, Kuldeep; Jin, Lu; Wang, Ruixin; Zhu, Da-Ming; Peng, Zhonghua

2015-05-13

Charge carrier mobility and its optimization play a critical role in the development of cutting-edge organic electronic and optoelectronic devices. Even though space-charge-limited current (SCLC) hole mobilities as high as 1.4 cm(2) V(-1) s(-1) have been reported for microscopically sized highly ordered liquid-crystalline conjugated small molecules, the SCLC hole mobility of device-sized thin films of conjugated polymers is still much lower, ranging from 10(-6) to 10(-3) cm(2) V(-1) s(-1). Herein, we report the synthesis, characterizations, and thin-film SCLC mobility of three discotic conjugated polymers, INDT-TT, INDT-BT, and INDT-NDT. Optical studies indicate that polymer INDT-NDT adopts a folded conformation in solutions of good or poor solvents, whereas polymer INDT-TT stays as random monomeric chains in good solvents and interchain aggregates in poor solvents. INDT-BT polymer chains, however, stay as foldamers in dilute solutions of good solvents but interchain aggregates in concentrated solutions or poor solvents. Circular dichroism spectroscopy provides clear evidence for the helical folding of INDT-NDT in solutions. Thin films spin-coated from 1,2-dichlorobenzene solutions of the polymers show SCLC hole mobility of 2.20 × 10(-6), 8.79 × 10(-5), and 2.77 × 10(-2) cm(2) V(-1) s(-1) for INDT-TT, INDT-BT, and INDT-NDT, respectively. HRTEM and powder XRD measurements show that INDT-NDT pristine thin films contain nanocrystalline domains, whereas the INDT-TT and INDT-BT films are amorphous. Thin films of INDT-NDT:PC71BM blends show increased crystallinity and further improved SCLC hole mobility up to 1.29 × 10(-1) cm(2) V(-1) s(-1), one of the highest SCLC mobility values ever recorded on solution-processed organic semiconducting thin films. The persistent folding conformation of INDT-NDT is believed to be responsible for the high crystallinity of its thin films and its high SCLC mobilities.

Reflex-mediated dynamic neuromuscular stabilization in stroke patients: EMG processing and ultrasound imaging.

PubMed

Yoon, Hyun S; You, Joshua Sung H

2017-07-20

Postural core instability is associated with poor dynamic balance and a high risk of serious falls. Both neurodevelopmental treatment (NDT) and dynamic neuromuscular stabilization (DNS) core stabilization exercises have been used to improve core stability, but the outcomes of these treatments remain unclear. This study was undertaken to examine the therapeutic effects of NDT and DNS core stabilization exercises on muscular activity, core stability, and core muscle thickness. Ten participants (5 healthy adults; 5 hemiparetic stroke patients) were recruited. Surface electromyography (EMG) was used to determine core muscle activity of the transversus abdominis/internal oblique (TrA/IO), external oblique (EO), and rectus abdominis (RA) muscles. Ultrasound imaging was used to measure transversus abdominals/internal oblique (TrA/IO) thickness, and a pressure biofeedback unit (PBU) was used to measure core stability during the DNS and NDT core exercise conditions. Data are reported as median and range and were compared using nonparametric Mann - Whitney U test and Wilcoxon signed rank test at p< 0.05. Both healthy and hemiparetic stroke groups showed greater median EMG amplitude in the TrA/IO muscles, core stability, and muscle thickness values during the DNS exercise condition than during the NDT core exercise condition, respectively (p< 0.05). However, the relative changes in the EMG amplitude, core stability, and muscle thickness values were greater during the DNS exercise condition than during the NDT core exercise condition in the hemiparetic stroke patient group (p< 0.05). Our novel results provide the first clinical evidence that DNS is more effective than NDT in both healthy and hemiparetic stroke subjects to provide superior deep core muscle activation, core stabilization, and muscle thickness. Moreover, such advantageous therapeutic benefits of the DNS core stabilization exercise over the NDT exercise were more apparent in the hemiparetis stroke patients than normal controls.

Non-Destructive Evaluation for Corrosion Monitoring in Concrete: A Review and Capability of Acoustic Emission Technique

PubMed Central

Zaki, Ahmad; Chai, Hwa Kian; Aggelis, Dimitrios G.; Alver, Ninel

2015-01-01

Corrosion of reinforced concrete (RC) structures has been one of the major causes of structural failure. Early detection of the corrosion process could help limit the location and the extent of necessary repairs or replacement, as well as reduce the cost associated with rehabilitation work. Non-destructive testing (NDT) methods have been found to be useful for in-situ evaluation of steel corrosion in RC, where the effect of steel corrosion and the integrity of the concrete structure can be assessed effectively. A complementary study of NDT methods for the investigation of corrosion is presented here. In this paper, acoustic emission (AE) effectively detects the corrosion of concrete structures at an early stage. The capability of the AE technique to detect corrosion occurring in real-time makes it a strong candidate for serving as an efficient NDT method, giving it an advantage over other NDT methods. PMID:26251904

Non-Destructive Evaluation for Corrosion Monitoring in Concrete: A Review and Capability of Acoustic Emission Technique.

PubMed

Zaki, Ahmad; Chai, Hwa Kian; Aggelis, Dimitrios G; Alver, Ninel

2015-08-05

Corrosion of reinforced concrete (RC) structures has been one of the major causes of structural failure. Early detection of the corrosion process could help limit the location and the extent of necessary repairs or replacement, as well as reduce the cost associated with rehabilitation work. Non-destructive testing (NDT) methods have been found to be useful for in-situ evaluation of steel corrosion in RC, where the effect of steel corrosion and the integrity of the concrete structure can be assessed effectively. A complementary study of NDT methods for the investigation of corrosion is presented here. In this paper, acoustic emission (AE) effectively detects the corrosion of concrete structures at an early stage. The capability of the AE technique to detect corrosion occurring in real-time makes it a strong candidate for serving as an efficient NDT method, giving it an advantage over other NDT methods.

NONDESTRUCTIVE TESTING (NDT) TECHNIQUES TO DETECT CONTAINED SUBSURFACE HAZARDOUS WASTE

EPA Science Inventory

The project involves the detection of buried containers with NDT (remote-sensing) techniques. Seventeen techniques were considered and four were ultimately decided upon. They were: electromagnetic induction (EMI); metal detection (MD); magnetometer (MAG); and ground penetrating r...

Status and prospect of NDT technology for nuclear energy industry in Korea

NASA Astrophysics Data System (ADS)

Lee, Joon Hyun

2016-02-01

Innovative energy technology is considered to be one of the key solutions for meeting the challenges of climate change and energy security, which is why global leaders are focusing on enhancing energy technology R&D. In accordance with the global movements to accelerate energy R&D, the Korean government has made significant investments in a broad spectrum of energy R&D programs, including energy efficiency, resources, CCS, new and renewable energy, power generation and electricity delivery, nuclear power and nuclear waste management. In order to manage government sponsored energy R&D programs in an efficient and effective way, the government established the Korea Institute of Energy technology Evaluation and Planning (KETEP) in 2009. Main activities of KETEP include developing energy technology roadmaps, planning, evaluating, and managing R&D programs, fostering experts in the field of energy, promoting international cooperation programs, gathering and analyzing energy statistics, and supporting infrastructure and commercialization. KETEP assists the Ministry of Trade, Industry and Energy in developing national R&D strategies while also working with researchers, universities, national institutes and the private sector for their successful energy technology and deployment. This presentation consists of three parts. First, I will introduce the characteristics of energy trends and mix in Korea. Then, I'll speak about the related national R&D strategies of energy technology. Finally, I'll finish up with the status and prospect of NDT technology for nuclear energy industry in Korea. The development of the on-line structural integrity monitoring systems and the related techniques in Korean nuclear power plant for the purpose of condition based maintenance is introduced. The needs of NDT techniques for inspection and condition monitoring for GEN IV including SFR, small module reactor etc., are also discussed.

A naphthodithiophene-diketopyrrolopyrrole donor molecule for efficient solution-processed solar cells.

PubMed

Loser, Stephen; Bruns, Carson J; Miyauchi, Hiroyuki; Ortiz, Rocío Ponce; Facchetti, Antonio; Stupp, Samuel I; Marks, Tobin J

2011-06-01

We report the synthesis, characterization, and first implementation of a naphtho[2,3-b:6,7-b']dithiophene (NDT)-based donor molecule in highly efficient organic photovoltaics (OPVs). When NDT(TDPP)(2) (TDPP = thiophene-capped diketopyrrolopyrrole) is combined with the electron acceptor PC(61)BM, a power conversion efficiency (PCE) of 4.06 ± 0.06% is achieved-a record for a PC(61)BM-based small-molecule OPV. The substantial PCE is attributed to the broad, high oscillator strength visible absorption, the ordered molecular packing, and an exceptional hole mobility of NDT(TDPP)(2). © 2011 American Chemical Society

Suppressor of fusion, a Fusarium oxysporum homolog of Ndt80, is required for nutrient-dependent regulation of anastomosis.

PubMed

Shahi, Shermineh; Fokkens, Like; Houterman, Petra M; Rep, Martijn

2016-10-01

Heterokaryon formation is an essential step in asexual recombination in Fusarium oxysporum. Filamentous fungi have an elaborate nonself recognition machinery to prevent formation and proliferation of heterokaryotic cells, called heterokaryon incompatibility (HI). In F. oxysporum the regulation of this machinery is not well understood. In Neurospora crassa, Vib-1, a putative transcription factor of the p53-like Ndt80 family of transcription factors, has been identified as global regulator of HI. In this study we investigated the role of the F. oxysporum homolog of Vib-1, called Suf, in vegetative hyphal and conidial anastomosis tube (CAT) fusion and HI. We identified a novel function for an Ndt80 homolog as a nutrient-dependent regulator of anastomosis. Strains carrying the SUF deletion mutation display a hyper-fusion phenotype during vegetative growth as well as germling development. In addition, conidial paring of incompatible SUF deletion strains led to more heterokaryon formation, which is independent of suppression of HI. Our data provides further proof for the divergence in the functions of different members Ndt80 family. We propose that Ndt80 homologs mediate responses to nutrient quality and quantity, with specific responses varying between species. Copyright © 2016 Elsevier Inc. All rights reserved.

High Resolution Millimeter Wave Inspecting of the Orbiter Acreage Heat Tiles of the Space Shuttle

NASA Technical Reports Server (NTRS)

Case, J. T.; Khakovsky, S.; Zoughi, r.; Hepburn, F.

2007-01-01

Presence of defects such as disbonds, delaminations, impact damage, in thermal protection systems can significantly reduce safety of the Space Shuttle and its crew. The physical cause of Space Shuttle Columbia's catastrophic failure was a breach in its thermal protection system, caused by a piece of external tank insulating foam separating from the external tank and striking the leading edge of the left wing of the orbiter. There is an urgent need for a rapid, robust and life-circle oriented nondestructive testing (NDT) technique capable of inspecting the external tank insulating foam as well as the orbiter's protective (acreage) heat tiles and its fuselage prior and subsequent to a launch. Such a comprehensive inspection technique enables NASA to perform life-cycle inspection on critical components of the orbiter and its supporting hardware. Consequently, NASA Marshall Space Flight Center initiated an investigation into several potentially viable NDT techniques for this purpose. Microwave and millimeter wave NDT methods have shown great potential to achieve these goals. These methods have been successfully used to produce images of the interior of various complex, thick and thin external tank insulating foam structures for real focused reflectometer at operating frequency from 50-100 GHz and for synthetic aperture techniques at Ku-band (12-18 GHz) and K-band (18-26 GHz). Preliminary results of inspecting heat tile specimens show that increasing resolution of the measurement system is an important issue. This paper presents recent results of an investigation for the purpose of detecting anomalies such as debonds and corrosion in metal substrate in complex multi-sectioned protective heat tile specimens using a real focused 150 GHz (D-band) reflectometer and wide-band millimeter wave holography at 33-50, GHz (Q-band).

Visible light driven mineralization of spiramycin over photostructured N-doped TiO2 on up conversion phosphors.

PubMed

Sacco, Olga; Vaiano, Vincenzo; Sannino, Diana; Ciambelli, Paolo

2017-04-01

A novel visible light-active photocatalyst formulation (NdT/OP) was obtained by supporting N-doped TiO 2 (NdT) particles on up-conversion luminescent organic phosphors (OP). The photocatalytic activity of such catalysts was evaluated for the mineralization process of spiramycin in aqueous solution. The effect of NdT loading in the range 15-60wt.% on bulk and surface characteristics of NdT/OP catalysts was investigated by several chemico-physical characterization techniques. The photocatalytic performance of NdT/OP catalysts in the removal of spyramicin from aqueous solution was assessed through photocatalytic tests under visible light irradiation. Total organic carbon (TOC) of aqueous solution, and CO and CO 2 gas concentrations evolved during the photodegradation were analyzed. A dramatic enhancement of photocatalytic activity of the photostructured visible active NdT/OP catalysts, compared to NdT catalyst, was observed. Only CO 2 was detected in gas-phase during visible light irradiation, proving that the photocatalytic process is effective in the mineralization of spiramycin, reaching very high values of TOC removal. The photocatalyst NdT/OP at 30wt.% of NdT loading showed the highest photocatalytic activity (58% of TOC removed after 180min irradiation against only 31% removal after 300min of irradiation of NdT). We attribute this enhanced activity to the high effectiveness in the utilization of visible light through improved light harvesting and exploiting. OP particles act as "photoactive support", able to be excited by the external visible light irradiation, and reissue luminescence of wavelength suitable to promote NdT photomineralization activity. Copyright © 2016. Published by Elsevier B.V.

A macroscopic non-destructive testing system based on the cantilever-sample contact resonance

NASA Astrophysics Data System (ADS)

Fu, Ji; Lin, Lizhi; Zhou, Xilong; Li, Yingwei; Li, Faxin

2012-12-01

Detecting the inside or buried defects in materials and structures is always a challenge in the field of nondestructive testing (NDT). In this paper, enlightened by the operation principle of the contact resonance force microscopy or atomic force acoustic microscopy (AFAM), we proposed a macroscopic NDT system based on contact resonance of the cantilever-sample surface to detect the local stiffness variations in materials or structures. We fabricated a piezoelectric unimorph with the dimension typically of 150 mm × 8 mm × 2 mm to act as a macroscopic cantilever, whose flexural mode vibration was driven by a wideband power amplifier together with a signal generator. The vibration signal of the macroscopic cantilever is detected by a high sensitive strain gauge bonded on the cantilever surface which is much more stable than the laser diode sensor in AFAM, thus making it very suitable for outdoor operations. Scanning is realized by a three-dimensional motorized stage with the Z axis for pressing force setting. The whole system is controlled by a LabVIEW-based homemade software. Like the AFAM, this NDT system can also work in two modes, i.e., the single-frequency mode and the resonance-tracking mode. In the latter mode, the contact stiffness at each pixel of the sample can be obtained by using the measured contact resonance frequency and a beam dynamics model. Testing results of this NDT system on a grid structure with an opaque panel show that in both modes the prefabricated defect beneath the panel can be detected and the grid structures can be clearly "seen," which indicates the validity of this NDT system. The sensitivity of this NDT system was also examined.

Physical Therapy and Infants with Down's Syndrome: The Effects of Early Intervention.

ERIC Educational Resources Information Center

Harris, Susan R.

1981-01-01

The neuromotor development of Down's syndrome (DS) infants is reviewed, current physical therapy approaches are cited, a neurodevelopmental treatment (NDT) approach is described, and a study on the effects of NDT on motor performance in DS infants is reported. (SB)

Structural health monitoring and probability of detection estimation

NASA Astrophysics Data System (ADS)

Forsyth, David S.

2016-02-01

Structural health monitoring (SHM) methods are often based on nondestructive testing (NDT) sensors and are often proposed as replacements for NDT to lower cost and/or improve reliability. In order to take advantage of SHM for life cycle management, it is necessary to determine the Probability of Detection (POD) of the SHM system just as for traditional NDT to ensure that the required level of safety is maintained. Many different possibilities exist for SHM systems, but one of the attractive features of SHM versus NDT is the ability to take measurements very simply after the SHM system is installed. Using a simple statistical model of POD, some authors have proposed that very high rates of SHM system data sampling can result in high effective POD even in situations where an individual test has low POD. In this paper, we discuss the theoretical basis for determining the effect of repeated inspections, and examine data from SHM experiments against this framework to show how the effective POD from multiple tests can be estimated.

Assessment of and standardization for quantitative nondestructive test

NASA Technical Reports Server (NTRS)

Neuschaefer, R. W.; Beal, J. B.

1972-01-01

Present capabilities and limitations of nondestructive testing (NDT) as applied to aerospace structures during design, development, production, and operational phases are assessed. It will help determine what useful structural quantitative and qualitative data may be provided from raw materials to vehicle refurbishment. This assessment considers metal alloys systems and bonded composites presently applied in active NASA programs or strong contenders for future use. Quantitative and qualitative data has been summarized from recent literature, and in-house information, and presented along with a description of those structures or standards where the information was obtained. Examples, in tabular form, of NDT technique capabilities and limitations have been provided. NDT techniques discussed and assessed were radiography, ultrasonics, penetrants, thermal, acoustic, and electromagnetic. Quantitative data is sparse; therefore, obtaining statistically reliable flaw detection data must be strongly emphasized. The new requirements for reusable space vehicles have resulted in highly efficient design concepts operating in severe environments. This increases the need for quantitative NDT evaluation of selected structural components, the end item structure, and during refurbishment operations.

Novel integrated nondestructive testing methodology for detection and evaluation of corrosion in cement-based materials.

DOT National Transportation Integrated Search

2014-06-01

The objective of this project focused on the development of a hybrid nondestructive testing and evaluation (NDT&E) methodology that combines the benefits of microwave NDT and thermography into one new technique. In this way, unique features of both N...

Local defect resonance for sensitive non-destructive testing

NASA Astrophysics Data System (ADS)

Adebahr, W.; Solodov, I.; Rahammer, M.; Gulnizkij, N.; Kreutzbruck, M.

2016-02-01

Ultrasonic wave-defect interaction is a background of ultrasound activated techniques for imaging and non-destructive testing (NDT) of materials and industrial components. The interaction, primarily, results in acoustic response of a defect which provides attenuation and scattering of ultrasound used as an indicator of defects in conventional ultrasonic NDT. The derivative ultrasonic-induced effects include e.g. nonlinear, thermal, acousto-optic, etc. responses also applied for NDT and defect imaging. These secondary effects are normally relatively inefficient so that the corresponding NDT techniques require an elevated acoustic power and stand out from conventional ultrasonic NDT counterparts for their specific instrumentation particularly adapted to high-power ultrasonic. In this paper, a consistent way to enhance ultrasonic, optical and thermal defect responses and thus to reduce an ultrasonic power required is suggested by using selective ultrasonic activation of defects based on the concept of local defect resonance (LDR). A strong increase in vibration amplitude at LDR enables to reliably detect and visualize the defect as soon as the driving ultrasonic frequency is matched to the LDR frequency. This also provides a high frequency selectivity of the LDR-based imaging, i.e. an opportunity of detecting a certain defect among a multitude of other defects in material. Some examples are shown how to use LDR in non-destructive testing techniques, like vibrometry, ultrasonic thermography and shearography in order to enhance the sensitivity of defect visualization.

Nondestructive testing and evaluation of wood : a worldwide research update

Treesearch

Brian K. Brashaw; Voichita Bucur; Ferenc Divos; Raquel Goncalves; Jianxiong Lu; Roger Meder; Roy F. Pellerin; Simon Potter; Robert J Ross; Xiping Wang; Yafang Yin

2009-01-01

The international forest products research community is responding to these driving forces by conducting NDT/NDE research to provide the technologies needed to address these challenges. This article presents a sample of the on-going NDT/NDE research efforts being conducted in several areas of the world.

Structural health monitoring of wind turbine blades

NASA Astrophysics Data System (ADS)

Rumsey, Mark A.; Paquette, Joshua A.

2008-03-01

As electric utility wind turbines increase in size, and correspondingly, increase in initial capital investment cost, there is an increasing need to monitor the health of the structure. Acquiring an early indication of structural or mechanical problems allows operators to better plan for maintenance, possibly operate the machine in a de-rated condition rather than taking the unit off-line, or in the case of an emergency, shut the machine down to avoid further damage. This paper describes several promising structural health monitoring (SHM) techniques that were recently exercised during a fatigue test of a 9 meter glass-epoxy and carbon-epoxy wind turbine blade. The SHM systems were implemented by teams from NASA Kennedy Space Center, Purdue University and Virginia Tech. A commercial off-the-shelf acoustic emission (AE) NDT system gathered blade AE data throughout the test. At a fatigue load cycle rate around 1.2 Hertz, and after more than 4,000,000 fatigue cycles, the blade was diagnostically and visibly failing at the out-board blade spar-cap termination point at 4.5 meters. For safety reasons, the test was stopped just before the blade completely failed. This paper provides an overview of the SHM and NDT system setups and some current test results.

Progress in terahertz nondestructive testing: A review

NASA Astrophysics Data System (ADS)

Zhong, Shuncong

2018-05-01

Terahertz (THz) waves, whose frequencies range between microwave and infrared, are part of the electromagnetic spectrum. A gap exists in THz literature because investigating THz waves is difficult due to the weak characteristics of the waves and the lack of suitable THz sources and detectors. Recently, THz nondestructive testing (NDT) technology has become an interesting topic. This review outlines several typical THz devices and systems and engineering applications of THz NDT techniques in composite materials, thermal barrier coatings, car paint films, marine protective coatings, and pharmaceutical tablet coatings. THz imaging has higher resolution but lower penetration than ultrasound imaging. This review presents the significance and advantages provided by the emerging THz NDT technique.

Nondestructive evaluation of green wood using stress wave and transverse vibration techniques

Treesearch

Udaya B. Halabe; Gangadhar M. Bidigalu; Hota V.S. GangaRao; Robert J. Ross

1997-01-01

Longitudinal stress wave and transverse vibration nondestructive testing (NDT) techniques have proven to be accurate means of evaluating the quality of wood based products. Researchers have found strong relationships between stress wave and transverse vibration parameters (e.g., wave velocity and modulus of elasticity predicted using NDT measurements) with the actual...

Is It Too Late To Save Policy Debate?

ERIC Educational Resources Information Center

Herbeck, Dale A.

National Debate Tournament (NDT) policy debate is in a state of crisis, suffering a steady and precipitous drop in participation. This decline is due not to external factors, but rather to problems and abuses unique to NDT policy debate. Its demise reflects a much broader problem, the abrogation of intellectual leadership in the activity. Coaches…

Lactobacillus reuteri 2′-Deoxyribosyltransferase, a Novel Biocatalyst for Tailoring of Nucleosides▿ † ‡

PubMed Central

Fernández-Lucas, Jesús; Acebal, Carmen; Sinisterra, José V.; Arroyo, Miguel; de la Mata, Isabel

2010-01-01

A novel type II nucleoside 2′-deoxyribosyltransferase from Lactobacillus reuteri (LrNDT) has been cloned and overexpressed in Escherichia coli. The recombinant LrNDT has been structural and functionally characterized. Sedimentation equilibrium analysis revealed a homohexameric molecule of 114 kDa. Circular dichroism studies have showed a secondary structure containing 55% α-helix, 10% β-strand, 16% β-sheet, and 19% random coil. LrNDT was thermostable with a melting temperature (Tm) of 64°C determined by fluorescence, circular dichroism, and differential scanning calorimetric studies. The enzyme showed high activity in a broad pH range (4.6 to 7.9) and was also very stable between pH 4 and 7.9. The optimal temperature for activity was 40°C. The recombinant LrNDT was able to synthesize natural and nonnatural nucleoside analogues, improving activities described in the literature, and remarkably, exhibited unexpected new arabinosyltransferase activity, which had not been described so far in this kind of enzyme. Furthermore, synthesis of new arabinonucleosides and 2′-fluorodeoxyribonucleosides was carried out. PMID:20048065

Improving Non-Destructive Concrete Strength Tests Using Support Vector Machines

PubMed Central

Shih, Yi-Fan; Wang, Yu-Ren; Lin, Kuo-Liang; Chen, Chin-Wen

2015-01-01

Non-destructive testing (NDT) methods are important alternatives when destructive tests are not feasible to examine the in situ concrete properties without damaging the structure. The rebound hammer test and the ultrasonic pulse velocity test are two popular NDT methods to examine the properties of concrete. The rebound of the hammer depends on the hardness of the test specimen and ultrasonic pulse travelling speed is related to density, uniformity, and homogeneity of the specimen. Both of these two methods have been adopted to estimate the concrete compressive strength. Statistical analysis has been implemented to establish the relationship between hammer rebound values/ultrasonic pulse velocities and concrete compressive strength. However, the estimated results can be unreliable. As a result, this research proposes an Artificial Intelligence model using support vector machines (SVMs) for the estimation. Data from 95 cylinder concrete samples are collected to develop and validate the model. The results show that combined NDT methods (also known as SonReb method) yield better estimations than single NDT methods. The results also show that the SVMs model is more accurate than the statistical regression model. PMID:28793627

A new mode of acoustic NDT via resonant air-coupled emission

NASA Astrophysics Data System (ADS)

Solodov, Igor; Dillenz, Alexander; Kreutzbruck, Marc

2017-06-01

Resonant modes of non-destructive testing (NDT) which make use of local damage resonance (LDR) have been developed recently and demonstrated a significant increase in efficiency and sensitivity of hybrid inspection techniques by laser vibrometry, ultrasonic thermography, and shearography. In this paper, a new fully acoustic version of resonant NDT is demonstrated for defects in composite materials relevant to automotive and aviation applications. This technique is based on an efficient activation of defect vibrations by using a sonic/ultrasonic wave matched to a fundamental LDR frequency of the defect. On this condition, all points of the faulty area get involved in synchronous out-of-plane vibrations which produce a similar in-phase wave motion in ambient air. This effect of resonant air-coupled emission results in airborne waves emanating from the defect area, which can be received by a commercial microphone (low LDR frequency) or an air-coupled ultrasonic transducer (high frequency LDR). A series of experiments confirm the feasibility of both contact and non-contact versions of the technique for NDT and imaging of simulated and realistic defects (impacts, delaminations, and disbonds) in composites.

Defect recognition in CFRP components using various NDT methods within a smart manufacturing process

NASA Astrophysics Data System (ADS)

Schumacher, David; Meyendorf, Norbert; Hakim, Issa; Ewert, Uwe

2018-04-01

The manufacturing process of carbon fiber reinforced polymer (CFRP) components is gaining a more and more significant role when looking at the increasing amount of CFRPs used in industries today. The monitoring of the manufacturing process and hence the reliability of the manufactured products, is one of the major challenges we need to face in the near future. Common defects which arise during manufacturing process are e.g. porosity and voids which may lead to delaminations during operation and under load. To find irregularities and classify them as possible defects in an early stage of the manufacturing process is of high importance for the safety and reliability of the finished products, as well as of significant impact from an economical point of view. In this study we compare various NDT methods which were applied to similar CFRP laminate samples in order to detect and characterize regions of defective volume. Besides ultrasound, thermography and eddy current, different X-ray methods like radiography, laminography and computed tomography are used to investigate the samples. These methods are compared with the intention to evaluate their capability to reliably detect and characterize defective volume. Beyond the detection and evaluation of defects, we also investigate possibilities to combine various NDT methods within a smart manufacturing process in which the decision which method shall be applied is inherent within the process. Is it possible to design an in-line or at-line testing process which can recognize defects reliably and reduce testing time and costs? This study aims to show up opportunities of designing a smart NDT process synchronized to the production based on the concepts of smart production (Industry 4.0). A set of defective CFRP laminate samples and different NDT methods were used to demonstrate how effective defects are recognized and how communication between interconnected NDT sensors and the manufacturing process could be organized.

Tracing Tethyan Phosphogenesis From Temporal Variations of 44Ca/42Ca and 143Nd/144Nd Isotope Ratios in Francolites and P Accumulation

NASA Astrophysics Data System (ADS)

Soudry, D.; Glenn, C.; Nathan, Y.; Segal, I.; Vonderhaar, D.

2004-12-01

Measurements of 44Ca/42Ca and 143Nd/144 isotope ratios in carbonate fluorapatite (CFA) through the Cretaceous-Eocene of the Negev (Israel) and of other sites in the Tethys margins, together with quantified rates of P and Ca accumulation and bulk sedimentation, allow us to understand variations of Tethyan phosphogenesis in time and space. The data provide a ˜ 90 m.y. (Hauterivian-Eocene) record of the Ca and Nd isotopic composition in 72 CFA samples representing 25 time-stratigraphic phosphate levels. Similar temporal changes are displayed by δ 44Ca and ɛ NdT. δ 44Ca is much lighter in the Hauterivian-Albian (δ 44Ca = - 0. 19 to - 0.06 ‰ ; n = 9) than in the Campanian-Eocene (δ 44Ca = + 0.29 to + 0.40 ‰ ; n = 41), whereas ɛ NdT increases from continental crust-like values in the Hauterivian-Albian (ɛ NdT = -12.8 to - 10.9; n = 8) to more radiogenic Pacific-like values (ɛ NdT = - 7.5 to - 6.2; n = 27) in the Campanian. Both δ 44Ca and ɛ NdT peaks in the Campanian coincide with the peak of Tethyan phosphogenesis in the Negev, marked by a sharp rise in P accumulation rates (from < 200 μ mole.cm-2 kyr-1 in pre-Campanian times to ˜ 1700 < 200 μ mole.cm-2 kyr-1 in the Campanian) and by a decrease in the rates of Ca accumulation and bulk sedimentation. The coincident increases of δ 44Ca, ɛ NdT, and P accumulation in the Negev during the Campanian is interpreted as the combined effect of the Late Cretaceous global sea level rise, the development of a long-transit, westward-flowing circumglobal Tethyan current enhanced by widening of the Caribbean threshold at those times, and a favorable paleolatitude (8° -15° ) of the south Tethys shelf in the path of easterly winds. Extensive flooding of continental platforms, induced by the Late Cretaceous global sea level rise, probably reduced the influx of riverine Ca to oceans and increased carbonate deposition on shelves both causing seawater enrichment with heavy Ca. Similarly, intensification of ocean circulation, causing more incursion of Pacific water masses into the Tethys, probably also led to increase both the input of radiogenic Nd into the Tethys and the availability of dissolved P in photic waters. The much lower ɛ NdT values recorded in N. Africa CFA during Eocene times (ɛ NdT = - 10.0 to - 9.4) suggests Atlantic waters as main source of dissolved P for fuelling phosphate deposition in this area.

75 FR 38953 - Airworthiness Directives; BAE Systems (OPERATIONS) LIMITED Model BAe 146 and Avro 146-RJ Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-07

..., requiring repetitive non- destructive testing (NDT) inspections for cracking on the upper end of the NLG... Aviation Authority under AD number 002-06-2000, requiring repetitive non-destructive testing (NDT... that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by...

Reducing Sweeping Frequencies in Microwave NDT Employing Machine Learning Feature Selection

PubMed Central

Moomen, Abdelniser; Ali, Abdulbaset; Ramahi, Omar M.

2016-01-01

Nondestructive Testing (NDT) assessment of materials’ health condition is useful for classifying healthy from unhealthy structures or detecting flaws in metallic or dielectric structures. Performing structural health testing for coated/uncoated metallic or dielectric materials with the same testing equipment requires a testing method that can work on metallics and dielectrics such as microwave testing. Reducing complexity and expenses associated with current diagnostic practices of microwave NDT of structural health requires an effective and intelligent approach based on feature selection and classification techniques of machine learning. Current microwave NDT methods in general based on measuring variation in the S-matrix over the entire operating frequency ranges of the sensors. For instance, assessing the health of metallic structures using a microwave sensor depends on the reflection or/and transmission coefficient measurements as a function of the sweeping frequencies of the operating band. The aim of this work is reducing sweeping frequencies using machine learning feature selection techniques. By treating sweeping frequencies as features, the number of top important features can be identified, then only the most influential features (frequencies) are considered when building the microwave NDT equipment. The proposed method of reducing sweeping frequencies was validated experimentally using a waveguide sensor and a metallic plate with different cracks. Among the investigated feature selection techniques are information gain, gain ratio, relief, chi-squared. The effectiveness of the selected features were validated through performance evaluations of various classification models; namely, Nearest Neighbor, Neural Networks, Random Forest, and Support Vector Machine. Results showed good crack classification accuracy rates after employing feature selection algorithms. PMID:27104533

The effect of different physiotherapy interventions in post-BTX-A treatment of children with cerebral palsy.

PubMed

Desloovere, K; De Cat, J; Molenaers, G; Franki, I; Himpens, E; Van Waelvelde, H; Fagard, K; Van den Broeck, C

2012-01-01

To distinguish the effects of different physiotherapeutic programs in a post BTX-A regime for children with Cerebral Palsy (CP). Retrospective, controlled intervention study. A group of 38 children (X¯ = 7y7m, GMFCS I-III, 27 bilateral, 11 unilateral CP) receiving an individually defined Neurodevelopment Treatment (NDT) program, was matched and compared to a group of children with the same age, GMFCS and diagnosis, receiving more conventional physiotherapy treatment. All patients received selective tone-reduction by means of multilevel BTX-A injections and adequate follow-up treatment, including physiotherapy. Three-dimensional gait analyses and clinical examination was performed pre and two months post-injection. Treatment success was defined using the Goal Attainment Scale (GAS). Both groups' mean converted GAS scores were above 50. The average converted GAS score was higher in the group of children receiving NDT than in the group receiving conventional physiotherapy (p < 0.05). In the NDT group, overall treatment success was achieved in 76% of the goals, compared to 67% of the goals defined for the conventional physiotherapy group. Especially for the goals based on gait analyses (p < 0.05) and in the group of children with bilateral CP (p < 0.05), treatment success was higher in the NDT group. In a post-BTX-A regime, the short-term effects of an NDT approach are more pronouncedthan these from a conventional physiotherapy approach. Copyright © 2011 European Paediatric Neurology Society. Published by Elsevier Ltd. All rights reserved.

Noise-tolerant inverse analysis models for nondestructive evaluation of transportation infrastructure systems using neural networks

NASA Astrophysics Data System (ADS)

Ceylan, Halil; Gopalakrishnan, Kasthurirangan; Birkan Bayrak, Mustafa; Guclu, Alper

2013-09-01

The need to rapidly and cost-effectively evaluate the present condition of pavement infrastructure is a critical issue concerning the deterioration of ageing transportation infrastructure all around the world. Nondestructive testing (NDT) and evaluation methods are well-suited for characterising materials and determining structural integrity of pavement systems. The falling weight deflectometer (FWD) is a NDT equipment used to assess the structural condition of highway and airfield pavement systems and to determine the moduli of pavement layers. This involves static or dynamic inverse analysis (referred to as backcalculation) of FWD deflection profiles in the pavement surface under a simulated truck load. The main objective of this study was to employ biologically inspired computational systems to develop robust pavement layer moduli backcalculation algorithms that can tolerate noise or inaccuracies in the FWD deflection data collected in the field. Artificial neural systems, also known as artificial neural networks (ANNs), are valuable computational intelligence tools that are increasingly being used to solve resource-intensive complex engineering problems. Unlike the linear elastic layered theory commonly used in pavement layer backcalculation, non-linear unbound aggregate base and subgrade soil response models were used in an axisymmetric finite element structural analysis programme to generate synthetic database for training and testing the ANN models. In order to develop more robust networks that can tolerate the noisy or inaccurate pavement deflection patterns in the NDT data, several network architectures were trained with varying levels of noise in them. The trained ANN models were capable of rapidly predicting the pavement layer moduli and critical pavement responses (tensile strains at the bottom of the asphalt concrete layer, compressive strains on top of the subgrade layer and the deviator stresses on top of the subgrade layer), and also pavement surface deflections with very low average errors comparable with those obtained directly from the finite element analyses.

Nondestructive testing for assessing wood members in structures : a review

Treesearch

R. J. Ross; R. F. Pellerin

1994-01-01

Numerous organizations have conducted research to develop nondestructive testing (NDT) techniques for assessing the condition of wood members in structures. A review of this research was published in 1991. This is an update of the 1991 report. It presents a comprehensive review of published research on the development and use of NDT tools for in-place assessment of...

Thermoelectric SQUID method for the detection of segregations

NASA Astrophysics Data System (ADS)

Hinken, Johann H.; Tavrin, Yury

2000-05-01

Aero engine turbine discs are most critical parts. Material inhomogeneities can cause disc fractures during the flight with fatal air disasters. Nondestructive testing (NDT) of the discs in various machining steps is necessary and performed as well as possible. Conventional NDT methods, however, like eddy current testing and ultrasonic testing have unacceptable limits. For example, subsurface segregations often cannot be detected directly but only indirectly in such cases when cracks already have developed from them. This may be too late. A new NDT method, which we call the Thermoelectric SQUID Method, has been developed. It allows for the detection of metallic inclusions within non-ferromagnetic metallic base material. This paper describes the results of a feasibility study on aero engine turbine discs made from Inconel® 718. These contained segregations that had been detected before by anodic etching. With the Thermoelectric SQUID Method, these segregations were detected again, and further segregations below the surfaces have been found, which had not been detected before. For this new NDT method the disc material is quasi-transparent. The Thermoelectric SQUID Method is also useful to detect distributed and localized inhomogeneities in pure metals like niobium sheets for particle accelerators.

Identification of the Thickness of Nugget on Worksheet Spot Welding Using Non Destructive Test (NDT) - Effect of Pressure

NASA Astrophysics Data System (ADS)

Sifa, A.; Baskoro, A. S.; Sugeng, S.; Badruzzaman, B.; Endramawan, T.

2018-02-01

Resistance Spot Welding (RSW) is a process of connecting between two worksheet with thermomechanical loading process, RSW is widely used in automotive industry, the quality of splicing spot welding is influenced by several factors. One of the factors at the time of the welding process is pressure. The quality of welding on the nuggets can be determined by undertaking non-destructive testing by using Non Destructive Test (NDT) - Ultrasonic Test. In the NDT test is done by detecting the thickness of the nugget area, the purpose of research conducted to determine the effect of pressure to welding quality with Nugget thickness gauge measurement with Non Destructive Test method and manual measurement with micrometer, Experimental welding process by entering the welding parameters that have been specified and pressure variables 1 -5 bars on the worksheet thickness of 1 mm. The results of testing with NDT show there is addition of thickness in nugget superiority after compare with measurement result of thickness of nugget with micrometer which slightly experience thickness in nugget area, this indicates that the welding results have a connection between worksheet 1 and worksheet 2.

Development of the symmetrical laser shock test for weak bond inspection.

NASA Astrophysics Data System (ADS)

Sagnard, Maxime; Berthe, Laurent; Ecault, Romain; Touchard, Fabienne; Boustie, Michel

2017-06-01

This paper presents the LAser Shock Adhesion Test (LASAT) using symmetrical laser shocks. The study is part of ComBoNDT European project that develops new Non-Destructive Tests (NDT) to assess adherence properties of bonded composite structures. This NDT technique relies on the creation of a plasma on both side of the sample using two lasers. The plasma expands and generates shockwaves inside the material. When combined, the shockwaves create a local tensile strength. Properly set, this stress can be used to test interfaces adherence. Numerous experiments have shown that this adaptive technique can discriminate a good bond from a weak one, without damaging the composite structure. Weak bonds are usually created by contaminated surfaces (residues of release agent, finger prints, ...) and were artificially recreated for ComBoNDT test samples. Numerical simulations are being developed as well, to improve the comprehension of the physical phenomenon. And ultimately, using these numerical results, one should be able to find the correct laser parameters (intensity, laser spot diameter) to generate the right tensile strength at the desired location. This project has received funding from the European Union's Horizon 2020 research and innovation program under Grant agreement N 63649.

Accuracy of Non-Destructive Testing of PBRs to Estimate Fragilities

NASA Astrophysics Data System (ADS)

Brune, J. N.; Brune, R.; Biasi, G. P.; Anooshehpoor, R.; Purvance, M.

2011-12-01

Prior studies of Precariously Balanced Rocks (PBRs) have involved various methods of documenting rock shapes and fragilities. These have included non-destructive testing (NDT) methods such as photomodeling, and potentially destructive testing (PDT) such as forced tilt tests. PDT methods usually have the potential of damaging or disturbing the rock or its pedestal so that the PBR usefulness for future generations is compromised. To date we have force-tilt tested approximately 28 PBRs, and of these we believe 7 have been compromised. We suggest here that given other inherent uncertainties in the current methodologies, NDT methods are now sufficiently advanced as to be adequate for the current state of the art use for comparison with Ground Motion Prediction Equations (GMPEs) and seismic hazard maps (SHMs). Here we compare tilt-test static toppling estimates to three non-destructive methods: (1) 3-D photographic modeling (2) profile analysis assuming the rock is 2-D, and (3) expert judgments from photographs. 3-D modeling uses the commercial Photomodeler program and photographs in the field taken from numerous directions around the rock. The output polyhedral shape is analyzed in Matlab determine the center of mass and in Autocad to estimate the static overturning angle alpha. For the 2-D method we chose the photograph in profile looking perpendicular to the estimated direction of toppling. The rock is outlined as a 2-D object in Matlab. Rock dimensions, rocking points, and a vertical reference are supplied by the photo analyst to estimate the center of gravity and static force overturning angles. For the expert opinion method we used additional photographs taken from different directions to improve the estimates of the center of mass and the rocking points. We used 7 rocks for comparisons. The error in estimating tan alpha from 3-D modeling is about 0.05. For 2-D estimates an average error is about 0.1 (?). For expert opinion estimates the error is about 0.06. For individual rocks the uncertainties may be reduced with more extensive study. The one case (*) where tilt-testing differs materially from 3-D is because an irregular base on the rock allowed the rock to begin to tilt at a lower angle onto a second rocking point with higher alpha. 2-D methods perform well enough to use as a screening method for the larger archive, and reserve the more accurate photographic analyses for the rocks deemed most important. The table below gives a list of the tan alpha data:
Tilt vs. NDT Tan(alpha) values

Acoustic testing to enhance western forest values and meet customer wood quality needs

Treesearch

Peter Carter; David Briggs; Robert J. Ross; Xiping Wang

2005-01-01

Nondestructive testing (NDT) of wood products, such as lumber and veneer, for stiffness and strength evaluation has been proven and commercialized for many years. The NDT concept has been extended and commercialized in the Director HM-200™ tool for testing logs in advance of processing so manufacturers can make more informed log purchases and better match logs to...

The fate of triaged and rejected manuscripts.

PubMed

Zoccali, Carmine; Amodeo, Daniela; Argiles, Angel; Arici, Mustafa; D'arrigo, Graziella; Evenepoel, Pieter; Fliser, Danilo; Fox, Jonathan; Gesualdo, Loreto; Jadoul, Michel; Ketteler, Markus; Malyszko, Jolanta; Massy, Ziad; Mayer, Gert; Ortiz, Alberto; Sever, Mehmet; Vanholder, Raymond; Vinck, Caroline; Wanner, Christopher; Więcek, Andrzej

2015-12-01

In 2011, Nephrology Dialysis and Transplantation (NDT) established a more restrictive selection process for manuscripts submitted to the journal, reducing the acceptance rate from 25% (2008-2009) to currently about 12-15%. To achieve this goal, we decided to score the priority of manuscripts submitted to NDT and to reject more papers at triage than in the past. This new scoring system allows a rapid decision for the authors without external review. However, the risk of such a restrictive policy may be that the journal might fail to capture important studies that are eventually published in higher-ranked journals. To look into this problem, we analysed random samples of papers (∼10%) rejected by NDT in 2012. Of the papers rejected at triage and those rejected after regular peer review, 59 and 61%, respectively, were accepted in other journals. A detailed analysis of these papers showed that only 4 out of 104 and 7 out of 93 of the triaged and rejected papers, respectively, were published in journals with an impact factor higher than that of NDT. Furthermore, for all these papers, independent assessors confirmed the evaluation made by the original reviewers. The number of citations of these papers was similar to that typically obtained by publications in the corresponding journals. Even though the analyses seem reassuring, previous observations made by leading journals warn that the risk of 'big misses', resulting from selective editorial policies, remains a real possibility. We will therefore continue to maintain a high degree of alertness and will periodically track the history of manuscripts rejected by NDT, particularly papers that are rejected at triage by our journal. © The Author 2015. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.

Optical and mechanical nondestructive tests for measuring tomato fruit firmness

NASA Astrophysics Data System (ADS)

Manivel-Chávez, Ricardo A.; Garnica-Romo, M. G.; Arroyo-Correa, Gabriel; Aranda-Sánchez, Jorge I.

2011-08-01

Ripening is one of the most important processes to occur in fruits which involve changes in color, flavor, and texture. An important goal in quality control of fruits is to substitute traditional sensory testing methods with reliable nondestructive tests (NDT). In this work we study the firmness of tomato fruits by using optical and mechanical NDT. Optical and mechanical parameters, measured along the tomato shelf life, are shown.

The Effect of Localized Damage on the Electrical Conductivity of Bare Carbon Fiber Tow and its Use as a Non-Destructive Evaluation Tool for Composite Overwrapped Pressure Vessels

NASA Technical Reports Server (NTRS)

Wentzel, Daniel

2015-01-01

Composite materials are beneficial because of their high specific strength and low weight. Safety, Destructive testing and destructive testing, Non-Destructive Testing (NDT) and Non-Destructive Evaluation (NDE). Problem: Neither NDT nor NDE can provide sufficient data to determine life expectancy or quantify the damage state of a composite material.

Bdf1 Bromodomains Are Essential for Meiosis and the Expression of Meiotic-Specific Genes

PubMed Central

Perot, Jonathan; Arlotto, Marie; Mietton, Flore; Boland, Anne; Deleuze, Jean-François; Ferro, Myriam; Govin, Jérôme

2017-01-01

Bromodomain and Extra-terminal motif (BET) proteins play a central role in transcription regulation and chromatin signalling pathways. They are present in unicellular eukaryotes and in this study, the role of the BET protein Bdf1 has been explored in Saccharomyces cerevisiae. Mutation of Bdf1 bromodomains revealed defects on both the formation of spores and the meiotic progression, blocking cells at the exit from prophase, before the first meiotic division. This phenotype is associated with a massive deregulation of the transcription of meiotic genes and Bdf1 bromodomains are required for appropriate expression of the key meiotic transcription factor NDT80 and almost all the Ndt80-inducible genes, including APC complex components. Bdf1 notably accumulates on the promoter of Ndt80 and its recruitment is dependent on Bdf1 bromodomains. In addition, the ectopic expression of NDT80 during meiosis partially bypasses this dependency. Finally, purification of Bdf1 partners identified two independent complexes with Bdf2 or the SWR complex, neither of which was required to complete sporulation. Taken together, our results unveil a new role for Bdf1 –working independently from its predominant protein partners Bdf2 and the SWR1 complex–as a regulator of meiosis-specific genes. PMID:28068333

A New Algorithm Using the Non-Dominated Tree to Improve Non-Dominated Sorting.

PubMed

Gustavsson, Patrik; Syberfeldt, Anna

2018-01-01

Non-dominated sorting is a technique often used in evolutionary algorithms to determine the quality of solutions in a population. The most common algorithm is the Fast Non-dominated Sort (FNS). This algorithm, however, has the drawback that its performance deteriorates when the population size grows. The same drawback applies also to other non-dominating sorting algorithms such as the Efficient Non-dominated Sort with Binary Strategy (ENS-BS). An algorithm suggested to overcome this drawback is the Divide-and-Conquer Non-dominated Sort (DCNS) which works well on a limited number of objectives but deteriorates when the number of objectives grows. This article presents a new, more efficient algorithm called the Efficient Non-dominated Sort with Non-Dominated Tree (ENS-NDT). ENS-NDT is an extension of the ENS-BS algorithm and uses a novel Non-Dominated Tree (NDTree) to speed up the non-dominated sorting. ENS-NDT is able to handle large population sizes and a large number of objectives more efficiently than existing algorithms for non-dominated sorting. In the article, it is shown that with ENS-NDT the runtime of multi-objective optimization algorithms such as the Non-Dominated Sorting Genetic Algorithm II (NSGA-II) can be substantially reduced.

Performance of Cracked and Seated Rigid Airport Pavements.

DTIC Science & Technology

1987-04-01

situ properties of the cracked PCC material and of the uncracked PCC. Additionally, a visual condition survey of the pavements under investigation was...the overall pavement evaluation effort. Results of the NDT testing program were used to determine the in-situ properties of the cracked PCC material ...combined with the NDT deflection basin slopes, led to the conclusion that the cracked and seated PCC layer is behaving as a semi-rigid material . 45 OVERLAY

NASA CR-2120 - Summary of nondestructive testing theory and practice

NASA Technical Reports Server (NTRS)

Meister, R. P.

1974-01-01

This is a familiarization report of nondestructive testing (ndt) prepared by staff of the Battelle Columbus Laboratories on a NASA contract. There is a short introduction, a chapter on applicability of ndt which is illustrated with examples of typical defects and includes tables comparing the characteristics, interrelationships, and costs of the different techniques. There are chapters dealing with penetrants, magnetic particle radiography, ultrasonics, and eddy currents. New techniques are described.

A basic guide to overlay design using nondestructive testing equipment data

NASA Astrophysics Data System (ADS)

Turner, Vernon R.

1990-08-01

The purpose of this paper is to provide a basic and concise guide to designing asphalt concrete (AC) overlays over existing AC pavements. The basis for these designs is deflection data obtained from nondestructive testing (NDT) equipment. This data is used in design procedures which produce required overlay thickness or an estimate of remaining pavement life. This guide enables one to design overlays or better monitor the designs being performed by others. This paper will discuss three types of NDT equipment, the Asphalt Institute Overlay Designs by Deflection Analysis and by the effective thickness method as well as a method of estimating remaining pavement life, correlations between NDT equipment and recent correlations in Washington State. Asphalt overlays provide one of the most cost effective methods of improving existing pavements. Asphalt overlays can be used to strengthen existing pavements, to reduce maintenance costs, to increase pavement life, to provide a smoother ride, and to improve skid resistance.

Naphtho[1,2-b:5,6-b']dithiophene-Based Conjugated Polymers for Fullerene-Free Inverted Polymer Solar Cells.

PubMed

Jiang, Zhaoyan; Li, Huan; Wang, Zhen; Zhang, Jianqi; Zhang, Yajie; Lu, Kun; Wei, Zhixiang

2018-03-23

Three novel copolymers based on zigzag naphthodithiophene (zNDT) with different aromatic rings as π bridges and different core side substitutions are designed and synthesized (PzNDT-T-1,3-bis(4-(2-ethylhexyl)-thiophen-2-yl)-5,7-bis(2-ethylhexyl)benzo[1,2-c:4,5-c']-dithiophene-4,8-dione (BDD), PzNDT-TT-BDD, and PzNDTP-T-BDD, respectively). The 2D conjugation structure and molecular planarity of the polymers can be effectively altered through the modification of conjugated side chains and π-bridges. These alterations contribute to the variation in energy levels, light absorption capacity, and morphology compatibility of the polymers. When blended with the nonfullerene acceptor (2,2'-[(4,4,9,9-tetrahexyl-4,9-dihydro-sindaceno[1,2-b:5,6-b']dithiophene-2,7-diyl)bis[methylidyne(3-oxo-1H-indene-2,1(3H)-diylidene)

Improved image processing of road pavement defect by infrared thermography

NASA Astrophysics Data System (ADS)

Sim, Jun-Gi

2018-03-01

This paper intends to achieve improved image processing for the clear identification of defects in damaged road pavement structure using infrared thermography non-destructive testing (NDT). To that goal, 4 types of pavement specimen including internal defects were fabricated to exploit the results obtained by heating the specimens by natural light. The results showed that defects located down to a depth of 3 cm could be detected by infrared thermography NDT using the improved image processing method.

GPR used in combination with other NDT methods for assessing pavements in PPP projects

NASA Astrophysics Data System (ADS)

Loizos, Andreas; Plati, Christina

2014-05-01

In the recent decades, Public-Private Partnerships (PPP) has been adopted for highway infrastructure procurement in many countries. PPP projects typically take the form of a section of highway and connecting roadways which are to be construction and managed for a given concession period. Over the course of the highway concession period, the private agency takes over the pavement maintenance and rehabilitation duties. On this purpose, it is critical to find the most cost effective way to maintain the infrastructure in compliance with the agreed upon performance measures and a Pavement Management Systems (PMS) is critical to the success of this process. For the prosperous operation of a PMS it is necessary to have appropriate procedures for pavement monitoring and evaluation, which is important in many areas of pavement engineering. Non Destructive Testing (NDT) has played a major role in pavement condition monitoring, assessments and evaluation accomplishing continuous and quick collection of pavement data. The analysis of this data can lead to indicators related to trigger values (criteria) that define the pavement condition based on which the pavement "health" is perceived helping decide whether there is the need or not to intervene in the pavement. The accomplished perception appoints required management activities for preserving pavements in favor not only of the involved highway/road agencies but also of users' service. Amongst NDT methods Ground Penetrating Radar (GPR) seems to be a very powerful toll, as it provides a range of condition and construction pavement information. It can support effectively the implementation of PMS activities in the framework of pavement monitoring and evaluation. Given that, the present work aims to the development and adaptation of a protocol for the use of GPR in combination with other NDT methods, such as Falling Weight Deflectometer (FWD), for assessing pavements in PPP projects. It is based on the experience of Laboratory of Pavement Engineering of National Technical University of Athens (NTUA) gained through its research activities in various Greek PPP projects as well its involvement in several related European and International scientific actions. It is suggested that the implementation of such protocol could support the pavement management activities with respect to the needs of a PPP project. This is accomplished through the resulted advantages that include simplicity in application, economic benefits and familiarity that are very important factors towards the optimization of the resources and the utilization of the available information; both of them are required for the orderly operation of a PPP project. Acknowledgments: This work benefited from networking activities carried out within the EU funded COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar."

Fatigue and Fracture-Toughness Characterization of SAW and SMA A537 Class I Ship-Steel Weldments.

DTIC Science & Technology

1981-12-01

Charpy criterion and proposed NDT-DT criterion of Rolfe . Recommendations are made and further research is suggested to help clarify the assessment of...acceptable performance at -60aF. Likewise, at -60OF the NDT and DT data for these weldments marginally exceed the criteria proposed by Rolfe when the...exceed the CVN values equivalent to the 5/8 DT values required by Rolfe . The 5/8-inch dynamic-tear specimen is not recommended as a quality-control test

[Application and comparison of NDT-Bobath and Vojta methods in treatment of selected pathologies of the nervous system in children].

PubMed

Jóźwiak, Sergiusz; Podogrodzki, Jacek

2010-01-01

The paper compares effectiveness of NDT-Bobath and Vojta methods in the treatment of selected dysfunctions of the nervous system in children. It evaluates applicability of both methods in prenatal and perinatal injury of the central nervous system, myelomeningocele, Down syndrome and spasticity. The existing literature is supplemented by own clinical experience of the authors. The paper forms the opinion on the constant debates on the superiority of one method over another.

Detecting defects in marine structures by using eddy current infrared thermography.

PubMed

Swiderski, W

2016-12-01

Eddy current infrared (IR) thermography is a new nondestructive testing (NDT) technique used for the detection of cracks in electroconductive materials. By combining the well-established inspection methods of eddy current NDT and IR thermography, this technique uses induced eddy currents to heat test samples. In this way, IR thermography allows the visualization of eddy current distribution that is distorted in defect sites. This paper discusses the results of numerical modeling of eddy current IR thermography procedures in application to marine structures.

Development of Integrated and Flexible Ultrasonic Transducers for Aerospace Applications

NASA Astrophysics Data System (ADS)

Wu, Kuo-Ting

2011-12-01

High temperature (HT) integrated (IUTs) and flexible ultrasonic transducers (FUTs) for potential aerospace applications in the area of nondestructive testing (NDT) and structural health monitoring (SHM) are developed. The main merits are that IUTs can be fabricated on-site and FUTs are feasible and attractive for on-site installation. The piezoelectric composite films of these HT ultrasonic transducers (HTUTs) are made by sol-gel spray fabrication. Lead-zirconate titanate composite (PZT-c), bismuth titanate composite (BIT-c), or lithium niobate composite (LiNbO3-c) films were coated onto metallic substrates with planar and curved surfaces and investigated as IUTs. Their maximum operating temperatures were demonstrated at up to 150°C, 400°C, and 800°C, respectively. PZT-c or BIT-c films were coated onto 75 mum or 38 mum thick metallic membranes and were investigated as FUTs. They can be bonded onto flat or curved surfaces for NDT and SHM. An FUT made of BIT-c film coated onto a stainless steel membrane glued onto a steel plate was performed at up to 300°C. Besides being coated onto metallic materials, sol-gel sprayed composite films were also coated onto graphite/epoxy (Gr/Ep) plates as IUTs and 50 mum thick polyimide films as FUTs for the thickness and delamination evaluation. Using acoustic mode conversion techniques, HTUTs for shear (S) wave, surface acoustic wave (SAW), and plate acoustic wave (PAW), have been developed. HT ultrasonic probes simultaneously producing one longitudinal (L) and two orthogonally polarized S waves were demonstrated in metallic and Plexiglas probes. The potential applications of these probes were discussed. Also applying mode conversion approaches, HT symmetrical, anti-symmetrical, and shear horizontal (SH) PAWs UTs for NDT and SHM were developed. The results showed that the SH PAWs may be the best candidate for NDT and SHM purposes for plate structures. Generation and detection of guided acoustic waves for NDT were demonstrated by using IUTs or FUTs with metallic wedges, mechanical gratings or interdigital transducers as well. The experiments with these three approaches were performed at up to 300°C. Furthermore, two non-contact ultrasonic measurement techniques by sol-gel sprayed composite films were presented in this thesis. One is using lasers to generate ultrasound and IUTs as receivers, and the other is using induction-based non-contact ultrasonic measurement technique with IUTs. NDT of bonded composite patches on aluminum plates was performed using laser generated ultrasound and IUT receivers. The induction-based ultrasonic measurement of a Gr/Ep composite plate rotated at 1000 rpm was demonstrated. The IUTs and FUTs developed in this thesis are able to provide signals with good signal-to-noise ratios at elevated temperature on structures and parts having a curved surface. They are light weight and miniature in size. They may be used for real-time, in situ, nondestructive local and global (large area) damage detection and assessment in aerospace NDT and SHM applications.

A Review of Microwave Thermography Nondestructive Testing and Evaluation

PubMed Central

Zhang, Hong; Yang, Ruizhen; He, Yunze; Foudazi, Ali; Cheng, Liang; Tian, Guiyun

2017-01-01

Microwave thermography (MWT) has many advantages including strong penetrability, selective heating, volumetric heating, significant energy savings, uniform heating, and good thermal efficiency. MWT has received growing interest due to its potential to overcome some of the limitations of microwave nondestructive testing (NDT) and thermal NDT. Moreover, during the last few decades MWT has attracted growing interest in materials assessment. In this paper, a comprehensive review of MWT techniques for materials evaluation is conducted based on a detailed literature survey. First, the basic principles of MWT are described. Different types of MWT, including microwave pulsed thermography, microwave step thermography, microwave pulsed phase thermography, and microwave lock-in thermography are defined and introduced. Then, MWT case studies are discussed. Next, comparisons with other thermography and NDT methods are conducted. Finally, the trends in MWT research are outlined, including new theoretical studies, simulations and modelling, signal processing algorithms, internal properties characterization, automatic separation and inspection systems. This work provides a summary of MWT, which can be utilized for material failures prevention and quality control. PMID:28505130

Naphtho[2,1-b:3,4-b']dithiophene-based bulk heterojunction solar cells: how molecular structure influences nanoscale morphology and photovoltaic properties.

PubMed

Kim, Yu Jin; Cheon, Ye Rim; Back, Jang Yeol; Kim, Yun-Hi; Chung, Dae Sung; Park, Chan Eon

2014-11-10

Organic bulk heterojunction photovoltaic devices based on a series of three naphtho[2,1-b:3,4-b']dithiophene (NDT) derivatives blended with phenyl-C71-butyric acid methyl ester were studied. These three derivatives, which have NDT units with various thiophene-chain lengths, were employed as the donor polymers. The influence of their molecular structures on the correlation between their solar-cell performances and their degree of crystallization was assessed. The grazing-incidence angle X-ray diffraction and atomic force microscopy results showed that the three derivatives exhibit three distinct nanoscale morphologies. We correlated these morphologies with the device physics by determining the J-V characteristics and the hole and electron mobilities of the devices. On the basis of our results, we propose new rules for the design of future generations of NDT-based polymers for use in bulk heterojunction solar cells. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

NDT of fiber-reinforced composites with a new fiber-optic pump–probe laser-ultrasound system☆

PubMed Central

Pelivanov, Ivan; Buma, Takashi; Xia, Jinjun; Wei, Chen-Wei; O’Donnell, Matthew

2014-01-01

Laser-ultrasonics is an attractive and powerful tool for the non-destructive testing and evaluation (NDT&E) of composite materials. Current systems for non-contact detection of ultrasound have relatively low sensitivity compared to contact peizotransducers. They are also expensive, difficult to adjust, and strongly influenced by environmental noise. Moreover, laser-ultrasound (LU) systems typically launch only about 50 firings per second, much slower than the kHz level pulse repetition rate of conventional systems. As demonstrated here, most of these drawbacks can be eliminated by combining a new generation of compact, inexpensive, high repetition rate nanosecond fiber lasers with new developments in fiber telecommunication optics and an optimally designed balanced probe beam detector. In particular, a modified fiber-optic balanced Sagnac interferometer is presented as part of a LU pump–probe system for NDT&E of aircraft composites. The performance of the all-optical system is demonstrated for a number of composite samples with different types and locations of inclusions. PMID:25302156

Optically and non-optically excited thermography for composites: A review

NASA Astrophysics Data System (ADS)

Yang, Ruizhen; He, Yunze

2016-03-01

Composites, such as glass fiber reinforced polymer (GFRP) and carbon fiber reinforced polymer (CFRP), and adhesive bonding are being increasingly used in fields of aerospace, renewable energy, civil and architecture, and other industries. Flaws and damages are inevitable during either fabrication or lifetime of composites structures or components. Thus, nondestructive testing (NDT) are extremely required to prevent failures and to increase reliability of composite structures or components in both manufacture and in-service inspection. Infrared thermography techniques including pulsed thermography, pulsed phase thermography, and lock-in thermography have shown the great potential and advantages. Besides conventional optical thermography, other sources such as laser, eddy current, microwave, and ultrasound excited thermography are drawing increasingly attentions for composites. In this work, a fully, in-depth and comprehensive review of thermography NDT techniques for composites inspection was conducted based on an orderly and concise literature survey and detailed analysis. Firstly, basic concepts for thermography NDT were defined and introduced, such as volume heating thermography. Next, the developments of conventional optic, laser, eddy current, microwave, and ultrasound thermography for composite inspection were reviewed. Then, some case studies for scanning thermography were also reviewed. After that, the strengths and limitations of thermography techniques were concluded through comparison studies. At last, some research trends were predicted. This work containing critical overview, detailed comparison and extensive list of references will disseminates knowledge between users, manufacturers, designers and researchers involved in composite structures or components inspection by means of thermography NDT techniques.

KSC-2014-1941

NASA Image and Video Library

2014-04-02

CAPE CANAVERAL, Fla. – Paul Vona, operations engineer, NDT Services, with PaR Systems Inc., talks with members of the media about the automated X-ray system in the robotic inspection cell at Hangar N at Cape Canaveral Air Force Station in Florida. PaR Systems held an Open House to celebrate the one-year anniversary of a lease agreement with Kennedy. Under a 15-year lease, PaR Systems is utilizing Hangar N and its unique nondestructive testing equipment. The partnership agreement was established by Kennedy's Center Planning and Development Directorate. The agreement is just one example of the types of partnerships that Kennedy is seeking to create a multi-user spaceport. Photo credit: NASA/Cory Huston

KSC-2014-1942

NASA Image and Video Library

2014-04-02

CAPE CANAVERAL, Fla. – Paul Vona, operations engineer, NDT Services, with PaR Systems Inc., demonstrates the automated X-ray system in the robotic inspection cell for members of the media at Hangar N at Cape Canaveral Air Force Station in Florida. PaR Systems held an Open House to celebrate the one-year anniversary of a lease agreement with Kennedy. Under a 15-year lease, PaR Systems is utilizing Hangar N and its unique nondestructive testing equipment. The partnership agreement was established by Kennedy's Center Planning and Development Directorate. The agreement is just one example of the types of partnerships that Kennedy is seeking to create a multi-user spaceport. Photo credit: NASA/Cory Huston

KSC-2014-1940

NASA Image and Video Library

2014-04-02

CAPE CANAVERAL, Fla. – Paul Vona, operations engineer, NDT Services, with PaR Systems Inc., demonstrates the automated X-ray system in the robotic inspection cell for members of the media at Hangar N at Cape Canaveral Air Force Station in Florida. PaR Systems held an Open House to celebrate the one-year anniversary of a lease agreement with Kennedy. Under a 15-year lease, PaR Systems is utilizing Hangar N and its unique nondestructive testing equipment. The partnership agreement was established by Kennedy's Center Planning and Development Directorate. The agreement is just one example of the types of partnerships that Kennedy is seeking to create a multi-user spaceport. Photo credit: NASA/Cory Huston

Advances in the application of holography for NDE

NASA Astrophysics Data System (ADS)

Sciammarella, C. A.

1985-01-01

The basic methodology of holographic interferometry in nondestructive testing (NDT) applications are described. Applications to crack detection in ceramic materials, including a crack 50 microns deep in a turbine blade, are discussed in detail. The theoretical principles of holographic interferometry are explained, and a general description of a holographic interferometric recording system is given. A nondestructive interferometric technique for measuring the gradual erosion of calcareous stones exposed to acid rain is also presented. Detailed line drawings illustrating the hologram recording and interferometric fringe pattern analysis elements in an interferometric holographic NDT device are provided.

[NDT-Bobath method used in the rehabilitation of patients with a history of ischemic stroke].

PubMed

Klimkiewicz, Paulina; Kubsik, Anna; Woldańska-Okońska, Marta

2012-01-01

Ischemic stroke is the third leading cause of death and disability in human. The vitally important problem after ischemic stroke is hemiparesis of the body. The most common methods used in improving the mobility of patients after ischemic stroke is a Bobath-NDT (Neuro-Developmental Treatment - Bobath), which initiated the Berta and Karel Bobath for children with cerebral palsy. It is a method designed to neurophysiological recovery of these vital functions that the patient was lost due to illness, and wants it back.

Augmented reality application for industrial non-destructive inspection training

NASA Astrophysics Data System (ADS)

Amza, Catalin Gheorghe; Zapciu, Aurelian; Teodorescu, Octav

2018-02-01

Such a technology - Augmented Reality (AR) has great potential of use, especially for training purposes of new operators on using expensive equipment. In this context, the paper presents an augmented reality training system developed for phased-array ultrasonic non-destructive testing (NDT) equipment. The application has been developed using Unity 5.6.0 game-engine platform integrated with Vuforia sdk toolkit for devices with Android operating system. The test results performed by several NDT operators showed good results, thus proving the potential of using the application in the industrial field.

Measurement of Insulation Compaction in the Cryogenic Fuel Tanks at Kennedy Space Center by Fast/Thermal Neutron Techniques

NASA Technical Reports Server (NTRS)

Livingston, R. A.; Schweitzer, J. S.; Parsons, Ann M.; Arens, Ellen E.

2010-01-01

The liquid hydrogen and oxygen cryogenic storage tanks at John F. Kennedy Space Center (KSC) use expanded perlite as thermal insulation. Th ere is evidence that some of the perlite has compacted over time, com promising the thermal performance and possibly also structural integr ity of the tanks. Therefore an Non-destructive Testing (NDT) method for measuring the perlite density or void fraction is urgently needed. Methods based on neutrons are good candidates because they can readil y penetrate through the 1.75 cm outer steel shell and through the ent ire 120 cm thickness of the perlite zone. Neutrons interact with the nuclei of materials to produce characteristic gamma rays which are the n detected. The gamma ray signal strength is proportional to the atom ic number density. Consequently, if the perlite is compacted then the count rates in the individual peaks in the gamma ray spectrum will i ncrease. Perlite is a feldspathic volcanic rock made up of the major elements Si, AI, Na, K and 0 along with some water. With commercially available portable neutron generators it is possible to produce simul taneously fluxes of neutrons in two energy ranges: fast (14 MeV) and thermal (25 meV). Fast neutrons produce gamma rays by inelastic scatt ering which is sensitive to Fe and O. Thermal neutrons produce gamma rays by radiative capture in prompt gamma neutron activation (PGNA) and this is sensitive to Si, AI, Na, Kand H. Thus the two energy ranges produce complementary information. The R&D program has three phases: numerical simulations of neutron and gamma ray transport with MCNP s oftware, evaluation of the system in the laboratory on test articles and finally mapping of the perlite density in the cryogenic tanks at KSC. The preliminary MCNP calculations have shown that the fast/therma l neutron NDT method is capable of distinguishing between expanded an d compacted perlite with excellent statistics.

NDT evaluation of long-term bond durability of CFRP-structural systems applied to RC highway bridges

NASA Astrophysics Data System (ADS)

Crawford, Kenneth C.

2016-06-01

The long-term durability of CFRP structural systems applied to reinforced-concrete (RC) highway bridges is a function of the system bond behavior over time. The sustained structural load performance of strengthened bridges depends on the carbon fiber-reinforced polymer (CFRP) laminates remaining 100 % bonded to concrete bridge members. Periodic testing of the CFRP-concrete bond condition is necessary to sustain load performance. The objective of this paper is to present a non-destructive testing (NDT) method designed to evaluate the bond condition and long-term durability of CFRP laminate (plate) systems applied to RC highway bridges. Using the impact-echo principle, a mobile mechanical device using light impact hammers moving along the length of a bonded CFRP plate produces unique acoustic frequencies which are a function of existing CFRP plate-concrete bond conditions. The purpose of this method is to test and locate CFRP plates de-bonded from bridge structural members to identify associated deterioration in bridge load performance. Laboratory tests of this NDT device on a CFRP plate bonded to concrete with staged voids (de-laminations) produced different frequencies for bonded and de-bonded areas of the plate. The spectra (bands) of frequencies obtained in these tests show a correlation to the CFRP-concrete bond condition and identify bonded and de-bonded areas of the plate. The results of these tests indicate that this NDT impact machine, with design improvements, can potentially provide bridge engineers a means to rapidly evaluate long lengths of CFRP laminates applied to multiple highway bridges within a national transportation infrastructure.

High-resolution nondestructive testing of multilayer dielectric materials using wideband microwave synthetic aperture radar imaging

NASA Astrophysics Data System (ADS)

Kim, Tae Hee; James, Robin; Narayanan, Ram M.

2017-04-01

Fiber Reinforced Polymer or Plastic (FRP) composites have been rapidly increasing in the aerospace, automotive and marine industry, and civil engineering, because these composites show superior characteristics such as outstanding strength and stiffness, low weight, as well as anti-corrosion and easy production. Generally, the advancement of materials calls for correspondingly advanced methods and technologies for inspection and failure detection during production or maintenance, especially in the area of nondestructive testing (NDT). Among numerous inspection techniques, microwave sensing methods can be effectively used for NDT of FRP composites. FRP composite materials can be produced using various structures and materials, and various defects or flaws occur due to environmental conditions encountered during operation. However, reliable, low-cost, and easy-to-operate NDT methods have not been developed and tested. FRP composites are usually produced as multilayered structures consisting of fiber plate, matrix and core. Therefore, typical defects appearing in FRP composites are disbondings, delaminations, object inclusions, and certain kinds of barely visible impact damages. In this paper, we propose a microwave NDT method, based on synthetic aperture radar (SAR) imaging algorithms, for stand-off imaging of internal delaminations. When a microwave signal is incident on a multilayer dielectric material, the reflected signal provides a good response to interfaces and transverse cracks. An electromagnetic wave model is introduced to delineate interface widths or defect depths from the reflected waves. For the purpose of numerical analysis and simulation, multilayered composite samples with various artificial defects are assumed, and their SAR images are obtained and analyzed using a variety of high-resolution wideband waveforms.

Millimeter Wave Detection of Localized Anomalies in the Space Shuttle External Fuel Tank Insulating Foam and Acreage Heat Tiles

NASA Technical Reports Server (NTRS)

Kharkovsky, S.; Case, J. T.; Zoughi, R.; Hepburn, F.

2005-01-01

The Space Shuttle Columbia's catastrophic accident emphasizes the growing need for developing and applying effective, robust and life-cycle oriented nondestructive testing (NDT) methods for inspecting the shuttle external fuel tank spray on foam insulation (SOFI) and its protective acreage heat tiles. Millimeter wave NDT techniques were one of the methods chosen for evaluating their potential for inspecting these structures. Several panels with embedded anomalies (mainly voids) were produced and tested for this purpose. Near-field and far-field millimeter wave NDT methods were used for producing millimeter wave images of the anomalies in SOFI panel and heat tiles. This paper presents the results of an investigation for the purpose of detecting localized anomalies in two SOFI panels and a set of heat tiles. To this end, reflectometers at a relatively wide range of frequencies (Ka-band (26.5 - 40 GHz) to W-band (75 - 110 GHz)) and utilizing different types of radiators were employed. The results clearly illustrate the utility of these methods for this purpose.

Welding and NDT development in support of Oman-India gas pipeline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Even, T.M.; Laing, B.; Hirsch, D.

1995-12-01

The Oman to India gas pipeline is designed for a maximum water depth of 3,500 m. For such a pipeline, resistance to hydrostatic collapse is a critical factor and dictates that very heavy wall pipe be used, preliminarily 24 inch ID x 1.625 inch wall. Because of the water depth, much of the installation will be by J-Lay which requires that the Joint be welded and inspected in a single station. This paper describes the results of welding and NDT test programs conducted to determine the minimum time to perform these operations in heavy wall pipe.

Distributed Stress Sensing and Non-Destructive Tests Using Mechanoluminescence Materials

NASA Astrophysics Data System (ADS)

Rahimi, Mohammad Reza

Rapid aging of infrastructure systems is currently pervasive in the US and the anticipated cost until 2020 for rehabilitation of aging lifeline will reach 3.6 trillion US dollars (ASCE 2013). Reliable condition or serviceability assessment is critically important in decision-making for economic and timely maintenance of the infrastructure systems. Advanced sensors and nondestructive test (NDT) methods are the key technologies for structural health monitoring (SHM) applications that can provide information on the current state of structures. There are many traditional sensors and NDT methods, for examples, strain gauges, ultrasound, radiography and other X-ray, etc. to detect any defect on the infrastructure. Considering that civil infrastructure is typically large-scale and exhibits complex behavior, estimation of structural conditions by the local sensing and NDT methods is a challenging task. Non-contact and distributed (or full-field) sensing and NDT method are desirable that can provide rich information on the civil infrastructure's state. Materials with the ability of emitting light, especially in the visible range, are named as luminescent materials. Mechanoluminescence (ML) phenomenon is the light emission from luminescent materials as a response of an induced mechanical stress. ML materials offer new opportunities for SHM that can directly visualize the stress and crack distributions on the surface of structures through ML light emission. Although material research for ML phenomena have been made substantially, applications of the ML sensors to full-field stress and crack visualization are still at infant stage and have yet to be full-fledged. Moreover, practical applications of the ML sensors for SHM of civil infrastructure have difficulties since numerous challenging problems (e.g. environmental effect) arise in actual applications. In order to realize a practical SHM system employing ML sensors, more research needs to be conducted, for examples, fundamental understandings of physics of ML phenomenon, method for quantitative stress measurements, calibration method for ML sensors, improvement of sensitivity, optimal manufacturing and design of ML sensors, environmental effects of ML phenomenon (e.g. temperature), image processing and analysis, etc. In this research, fundamental ML phenomena of two most promising ML sensing materials were experimentally studied and a methodology for full-field quantitative strain measurements, for the first time, was proposed along with a standardized calibration method. Characteristics and behavior of ML composites and thin films coated on the structure have been studied under various material tests including compression, tension, pure shear, bending, etc. In addition, ML emission sensitivity to the manufacturing parameters and experimental conditions was addressed in order to find optimal design the ML sensor. A phenomenological stress-optics transduction model for predicting the ML light intensity from a thin-film ML coating sensor subjected to in-plane stresses was proposed. A new full-field quantitative strain measuring methodology by ML thin film sensor was developed, for the first time, in order to visualize and measure the strain field. The results from the ML sensor were compared and verified by finite element simulation results. For NDT applications of ML sensors, experimental tests were conducted to visualize the cracks on structural surfaces and detect damages on structural components. In summary, this research proposes and realizes a new distributed stress sensor and NDT method using ML sensing materials. The proposed method is experimentally validated to be effective for stress measurement and crack visualizations. Successful completion of this research provides a leap toward a commercial light intensity-based optic sensor to be used as a new full-field stress measurement technology and NDT method.

Sit-to-stand movement changes in preschool-aged children with spastic diplegia following one neurodevelopmental treatment session--a pilot study.

PubMed

Yonetsu, Ryo; Iwata, Akira; Surya, John; Unase, Kazunori; Shimizu, Junichi

2015-01-01

This study was designed to provide a better understanding of how a single neurodevelopmental treatment (NDT) session affects sit-to-stand (STS) movements in children with cerebral palsy (CP). Eight children with spastic diplegia and five typically developing children, aged 4-6 years, participated in this study. The CP participants performed STS movements immediately before and after a 40-min NDT session. Using a three-dimensional, four-camera analysis system, angular movements involving the hip, knee and ankle joints of the participants were obtained. During forward tilt of the trunk, the maximum and final angles after the NDT session significantly decreased compared with those before the session (p < 0.05, p < 0.01). Moreover, the final hip flexion after the session also significantly decreased compared with that before the session (p < 0.01). On the other hand, the initial, maximum and final ankle dorsiflexion angles after the session were significantly greater (p < 0.05, p < 0.01 and p < 0.05, respectively) than before the session. These findings suggest that a single NDT session enables children with CP to stand from a seated position without using some atypical movement patterns. Preschool-aged children with spastic diplegia, with limited ability to independently transfer from a sitting position, and dependent on a wheelchair for mobility experience obstacles to enhanced activities of daily life and social participation. A single neurodevelopmental treatment session would enable children with spastic diplegia to perform sit-to-stand movements more efficiently, with selective muscle control. Understanding how a single neurodevelopmental treatment session affects sit-to-stand movements in children with spastic diplegia is invaluable for therapists planning more efficient therapeutic programs and may enable children with spastic diplegia to develop improved mobility.

Investigation of hot cracking resistance of 2205 duplex steel

NASA Astrophysics Data System (ADS)

Adamiec, J.; Ścibisz, B.

2010-02-01

Austenitic duplex steel of the brand 2205 according to Avesta Sheffield is used for welded constructions (pipelines, tanks) in the petrol industry, chemical industry and food industry. It is important to know the range of high-temperature brittleness in designing welding technology for constructions made of this steel type. There is no data in literature concerning this issue. High-temperature brittleness tests using the simulator of heat flow device Gleeble 3800 were performed. The tests results allowed the evaluation of the characteristic temperatures in the brittleness temperature range during the joining of duplex steels, specifically the nil-strength temperature (NST) and nil-ductility temperatures (NDT) during heating, the strength and ductility recovery temperatures (DRT) during cooling, the Rfparameter (Rf = (Tliquidus - NDT)/NDT) describing the duplex steel inclination for hot cracking, and the brittleness temperature range (BTR). It has been stated that, for the examined steel, this range is wide and amounts to ca. 90 °C. The joining of duplex steels with the help of welding techniques creates a significant risk of hot cracks. After analysis of the DTA curves a liquidus temperature of TL = 1465 °C and a solidus temperature of TS = 1454 °C were observed. For NST a mean value was assumed, in which the cracks appeared for six samples; the temperature was 1381 °C. As the value of the NDT temperature 1367 °C was applied while for DRT the assumed temperature was 1375 °C. The microstructure of the fractures was observed using a Hitachi S-3400N scanning electron microscope (SEM). The analyses of the chemical composition were performed using an energy-dispersive X-ray spectrometer (EDS), Noran System Six of Thermo Fisher Scientific. Essential differences of fracture morphology type over the brittle temperature range were observed and described.

Operational NDT simulator, towards human factors integration in simulated probability of detection

NASA Astrophysics Data System (ADS)

Rodat, Damien; Guibert, Frank; Dominguez, Nicolas; Calmon, Pierre

2017-02-01

In the aeronautic industry, the performance demonstration of Non-Destructive Testing (NDT) procedures relies on Probability Of Detection (POD) analyses. This statistical approach measures the ability of the procedure to detect a flaw with regard to one of its characteristic dimensions. The inspection chain is evaluated as a whole, including equipment configuration, probe effciency but also operator manipulations. Traditionally, a POD study requires an expensive campaign during which several operators apply the procedure on a large set of representative samples. Recently, new perspectives for the POD estimation have been introduced using NDT simulation to generate data. However, these approaches do not offer straightforward solutions to take the operator into account. The simulation of human factors, including cognitive aspects, often raises questions. To address these diffculties, we propose a concept of operational NDT simulator [1]. This work presents the first steps in the implementation of such simulator for ultrasound phased array inspection of composite parts containing Flat Bottom Holes (FBHs). The final system will look like a classical ultrasound testing equipment with a single exception: the displayed signals will be synthesized. Our hardware (ultrasound acquisition card, 3D position tracker) and software (position analysis, inspection scenario, synchronization, simulations) environments are developed as a bench to test the meta-modeling techniques able to provide fast-simulated realistic ultra-sound signals. The results presented here are obtained by on-the-fly merging of real and simulated signals. They confirm the feasibility of our approach: the replacement of real signals by purely simulated ones has been unnoticed by operators. We believe this simulator is a great prospect for POD evaluation including human factors, and may also find applications for training or procedure set-up.

[The effect of neurorehabilitation on the functional state and muscle tone of upper limb in patients after ischaemic stroke].

PubMed

Klimkiewicz, Paulina; Kubsik, Anna; Jankowska, Agnieszka; Woldańska-Okońska, Marta

2014-03-01

Rehabilitation of upper limb in patients after ischemic stroke is a major challenge for modern neurorehabilitation. Function of upper limb of patients after ischemic stroke returns on the end of the rehabilitation comparing with another parts of the body. Below presents two groups of patients after ischemic stroke who were rehabilitated with use of the following methods: kinesiotherapy combined with NDT- Bobath method and kinesiotherapy only. The aim of this study was to assess the impact of kinesiotherapy only and NDT- Bobath method combined with kinesiotherapy on the functional state and muscle tone of upper limb in patients after ischemic stroke. The study involved a group of 40 patients after ischemic stroke with motor control and muscle tone problems of upper limb. Patients were divided into two groups, each of them included 20 people. Upper limb in group I was rehabilitated with the use of kinesiotherapy exercise however group II with the use of kinesiotherapy exercise combined with NDT- Bobath method (Neurodevelopmental Treatment Bobath). To evaluate the patients before and after rehabilitation muscle tone Asworth scale was used and to assess functional status Rivermead Motor Assessment (RMAIII) scale was used. After 5 weeks of rehabilitation in group II in majority patients were observed decrease of muscle tone and improvement in upper limb functional status. In group I the muscle tone were also decreased and functional status were better but in smaller impact than in II group. Classical kinesiotherapy combined with the NDT-Bobath method gives better results in neurorehabilitation of upper limb than the use of kinesiotherapy exercises only in patients after ischemic stroke.

Quantitative Percussion Diagnostics For Evaluating Bond Integrity Between Composite Laminates

NASA Astrophysics Data System (ADS)

Poveromo, Scott Leonard

Conventional nondestructive testing (NDT) techniques used to detect defects in composites are not able to determine intact bond integrity within a composite structure and are costly to use on large and complex shaped surfaces. To overcome current NDT limitations, a new technology was utilized based on quantitative percussion diagnostics (QPD) to better quantify bond quality in fiber reinforced composite materials. Experimental results indicate that this technology is capable of detecting 'kiss' bonds (very low adhesive shear strength), caused by the application of release agents on the bonding surfaces, between flat composite laminates bonded together with epoxy adhesive. Specifically, the local value of the loss coefficient determined from quantitative percussion testing was found to be significantly greater for a release coated panel compared to that for a well bonded sample. Also, the local value of the probe force or force returned to the probe after impact was observed to be lower for the release coated panels. The increase in loss coefficient and decrease in probe force are thought to be due to greater internal friction during the percussion event for poorly bonded specimens. NDT standards were also fabricated by varying the cure parameters of an epoxy film adhesive. Results from QPD for the variable cure NDT standards and lap shear strength measurements taken of mechanical test specimens were compared and analyzed. Finally, experimental results have been compared to a finite element analysis to understand the visco-elastic behavior of the laminates during percussion testing. This comparison shows how a lower quality bond leads to a reduction in the percussion force by biasing strain in the percussion tested side of the panel.

Synthesis study of nondestructive testing devices for use in overlay thickness design of flexible pavements

NASA Astrophysics Data System (ADS)

Smith, R. E.; Lytton, R. L.

1984-04-01

A ready reference for highway engineers who are interested in purchasing nondestructive testing (NDT) equipment for use in designing overlays for flexible pavements was prepared. All commercially available equipment is described. Information includes basic descriptions plus current prices quoted by the manufacturers/distributors. To determine user comments, a questionnaire was sent to nine State agencies, and one Federal agency. The responses to these questionnaires are summarized. Overlay thickness design procedures for flexible pavements are reviewed. Important components related to the use of NDT deflection measuremnts in overlay design are identified and addressed. Summary tables of equipment characteristics and overlay design procedures are presented.

Automation of the NDT diagnostic using neural nets. Application: Inspection of Airbus longitudinal joints during maintenance

NASA Astrophysics Data System (ADS)

Brousset, Christine; Baudrillard, Gilles

A neural network tool was developed to automate the Non Destructive Testing (NDT) of aeronautical structures carried out with the SIAM system. The SIAM system is used to reveal splits in longitudinal metal joints on the Airbus fuselage. The integration of the neural net tool within the SIAM control system is considered possible. The automatic diagnostic should provide the operator with an aid which will permit a greater reliability of maintenance control. The diagnostic performed with this tool would be rapid;: the control of 30,000 rivets on the Airbus fuselage would take approximately 45 minutes.

A novel method for NDT applications using NXCT system at the Missouri University of Science & Technology

NASA Astrophysics Data System (ADS)

Sinha, Vaibhav; Srivastava, Anjali; Koo Lee, Hyoung

2014-06-01

A novel method for non-destructive analysis has been developed using a neutron/X-ray combined computed tomography (NXCT) system at the Missouri University of Science and Technology Reactor (MSTR). This imaging system takes advantage of the fact that neutrons and X-rays have characteristically different interactions with same materials. NXCT fuses the imaging capabilities of both systems at one location and allows instant evaluation for nondestructive testing (NDT) applications. This technique promises viable advances in the field of NDT. In this paper, the complete design criteria and procedures are provided. The described design criteria and procedures can effectively be utilized to design and develop advanced combined computed tomography system. The successful operation of the high resolution X-ray and neutron computed tomography has been demonstrated in this paper. The utility and importance of the NXCT system has been shown by nondestructive evaluation of various phantoms constituting different materials, geometrical, structural and compositional information. The concept of NXCT can be useful for concealed material detection, material characterization, investigation of complex geometries involving different atomic number materials and real time imaging for in-situ studies.

Acoustic imaging with time reversal methods: From medicine to NDT

NASA Astrophysics Data System (ADS)

Fink, Mathias

2015-03-01

This talk will present an overview of the research conducted on ultrasonic time-reversal methods applied to biomedical imaging and to non-destructive testing. We will first describe iterative time-reversal techniques that allow both focusing ultrasonic waves on reflectors in tissues (kidney stones, micro-calcifications, contrast agents) or on flaws in solid materials. We will also show that time-reversal focusing does not need the presence of bright reflectors but it can be achieved only from the speckle noise generated by random distributions of non-resolved scatterers. We will describe the applications of this concept to correct distortions and aberrations in ultrasonic imaging and in NDT. In the second part of the talk we will describe the concept of time-reversal processors to get ultrafast ultrasonic images with typical frame rates of order of 10.000 F/s. It is the field of ultrafast ultrasonic imaging that has plenty medical applications and can be of great interest in NDT. We will describe some applications in the biomedical domain: Quantitative Elasticity imaging of tissues by following shear wave propagation to improve cancer detection and Ultrafast Doppler imaging that allows ultrasonic functional imaging.

Quantitative multi-modal NDT data analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heideklang, René; Shokouhi, Parisa

2014-02-18

A single NDT technique is often not adequate to provide assessments about the integrity of test objects with the required coverage or accuracy. In such situations, it is often resorted to multi-modal testing, where complementary and overlapping information from different NDT techniques are combined for a more comprehensive evaluation. Multi-modal material and defect characterization is an interesting task which involves several diverse fields of research, including signal and image processing, statistics and data mining. The fusion of different modalities may improve quantitative nondestructive evaluation by effectively exploiting the augmented set of multi-sensor information about the material. It is the redundantmore » information in particular, whose quantification is expected to lead to increased reliability and robustness of the inspection results. There are different systematic approaches to data fusion, each with its specific advantages and drawbacks. In our contribution, these will be discussed in the context of nondestructive materials testing. A practical study adopting a high-level scheme for the fusion of Eddy Current, GMR and Thermography measurements on a reference metallic specimen with built-in grooves will be presented. Results show that fusion is able to outperform the best single sensor regarding detection specificity, while retaining the same level of sensitivity.« less

Transition from Nondestructive Testing (NDT) to Structural Health Monitoring (SHM): potential and challenges (presentation video)

NASA Astrophysics Data System (ADS)

Cawley, Peter

2014-03-01

There is a gradual shift in emphasis from periodic inspection with detachable transducers (NDT) to permanently installed monitoring systems giving information about the structural integrity at pre-programmed intervals or on demand (SHM). The drivers of this change are discussed, together with the requirements of successful SHM systems. Particular issues are that NDT often involves scanning and this is not possible with typical SHM configurations; it therefore becomes important to cover a significant area of structure from each transducer position. Guided waves provide a possible solution to this problem and permanently installed guided wave pipe inspection systems are now available. The sensitivity obtained with a permanently installed system is significantly better than that in a one-off test as baseline subtraction can be employed. However, this is far from trivial as it is necessary to compensate for benign changes such as temperature. The guided wave technique does not provide accurate remaining thickness information and is best complemented by point measurements at selected locations. Another issue is that the SHM transducers must survive in operational conditions, which is particularly difficult at high temperatures. Recent work at Imperial College and associated spin-out companies on solutions to these problems is discussed.

The value of the NDT-Bobath method in post-stroke gait training.

PubMed

Mikołajewska, Emilia

2013-01-01

Stroke is perceived a major cause of disability, including gait disorders. Looking for more effective methods of gait reeducation in post-stroke survivors is one of the most important issues in contemporary neurorehabilitation. Following a stroke, patients suffer from gait disorders. The aim of this paper is to present the outcomes of a study of post-stroke gait reeducation using the NeuroDevelopmental Treatment-Bobath (NDT-Bobath) method. The research was conducted among 60 adult patients who had undergone ischemic stroke. These patients were treated using the NDT-Bobath method. These patients' gait reeducation was assessed using spatio-temporal gait parameters (gait velocity, cadence and stride length). Measurements of these parameters were conducted by the same therapist twice: on admission, and after the tenth session of gait reeducation. Among the 60 patients involved in the study, the results were as follows: in terms of gait velocity, recovery was observed in 39 cases (65%), in terms of cadence, recovery was observed in 39 cases (65%), in terms of stride length, recovery was observed in 50 cases (83.33%). Benefits were observed after short-term therapy, reflected by measurable statistically significant changes in the patients' gait parameters.

POD evaluation using simulation: A phased array UT case on a complex geometry part

NASA Astrophysics Data System (ADS)

Dominguez, Nicolas; Reverdy, Frederic; Jenson, Frederic

2014-02-01

The use of Probability of Detection (POD) for NDT performances demonstration is a key link in products lifecycle management. The POD approach is to apply the given NDT procedure on a series of known flaws to estimate the probability to detect with respect to the flaw size. A POD is relevant if and only if NDT operations are carried out within the range of variability authorized by the procedure. Such experimental campaigns require collection of large enough datasets to cover the range of variability with sufficient occurrences to build a reliable POD statistics, leading to expensive costs to get POD curves. In the last decade research activities have been led in the USA with the MAPOD group and later in Europe with the SISTAE and PICASSO projects based on the idea to use models and simulation tools to feed POD estimations. This paper proposes an example of application of POD using simulation on the inspection procedure of a complex -full 3D- geometry part using phased arrays ultrasonic testing. It illustrates the methodology and the associated tools developed in the CIVA software. The paper finally provides elements of further progress in the domain.

Nondestructive evaluation of defects in carbon fiber reinforced polymer (CFRP) composites

NASA Astrophysics Data System (ADS)

Ngo, Andrew C. Y.; Goh, Henry K. H.; Lin, Karen K.; Liew, W. H.

2017-04-01

Carbon fiber reinforced polymer (CFRP) composites are increasingly used in aerospace applications due to its superior mechanical properties and reduced weight. Adhesive bonding is commonly used to join the composite parts since it is capable of joining incompatible or dissimilar components. However, insufficient adhesive or contamination in the adhesive bonds might occur and pose as threats to the integrity of the plane during service. It is thus important to look for suitable nondestructive testing (NDT) techniques to detect and characterize the sub-surface defects within the CFRP composites. Some of the common NDT techniques include ultrasonic techniques and thermography. In this work, we report the use of the abovementioned techniques for improved interpretation of the results.

Nd:YAG Pulsed Laser based flaw imaging techniques for noncontact NDE of an aluminum plate

NASA Astrophysics Data System (ADS)

Park, Woong-Ki; Lee, Changgil; Park, Seunghee

2012-04-01

Recently, the longitudinal, shear and surface waves have been very widely used as a kind of ultrasonic wave exploration methods to identify internal defects of metallic structures. The ultrasonic wave-based non-destructive testing (NDT) is one of main non-destructive inspection techniques for a health assessment about nuclear power plant, aircraft, ships, and/or automobile manufacturing. In this study, a noncontact pulsed laser-based flaw imaging NDT technique is implemented to detect the damage of a plate-like structure and to identify the location of the damage. To achieve this goal, the Nd:YAG pulsed laser equipment is used to generate a guided wave and scans a specific area to find damage location. The Nd: YAG pulsed laser is used to generate Lamb wave and piezoelectric sensors are installed to measure structural responses. Ann aluminum plate is investigated to verify the effectiveness and the robustness of the proposed NDT approach. A notch is a target to detect, which is inflicted on the surface of an aluminum plate. The damagesensitive features are extracted by comparing the time of flight of the guided wave obtained from an acoustic emission (AE) sensor and make use of the flaw imaging techniques of the aluminum plate.

Simulation supported POD for RT test case-concept and modeling

NASA Astrophysics Data System (ADS)

Gollwitzer, C.; Bellon, C.; Deresch, A.; Ewert, U.; Jaenisch, G.-R.; Zscherpel, U.; Mistral, Q.

2012-05-01

Within the framework of the European project PICASSO, the radiographic simulator aRTist (analytical Radiographic Testing inspection simulation tool) developed by BAM has been extended for reliability assessment of film and digital radiography. NDT of safety relevant components of aerospace industry requires the proof of probability of detection (POD) of the inspection. Modeling tools can reduce the expense of such extended, time consuming NDT trials, if the result of simulation fits to the experiment. Our analytic simulation tool consists of three modules for the description of the radiation source, the interaction of radiation with test pieces and flaws, and the detection process with special focus on film and digital industrial radiography. It features high processing speed with near-interactive frame rates and a high level of realism. A concept has been developed as well as a software extension for reliability investigations, completed by a user interface for planning automatic simulations with varying parameters and defects. Furthermore, an automatic image analysis procedure is included to evaluate the defect visibility. The radiographic modeling from 3D CAD of aero engine components and quality test samples are compared as a precondition for real trials. This enables the evaluation and optimization of film replacement for application of modern digital equipment for economical NDT and defined POD.

Quantitative impact characterization of aeronautical CFRP materials with non-destructive testing methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiefel, Denis, E-mail: Denis.Kiefel@airbus.com, E-mail: Rainer.Stoessel@airbus.com; Stoessel, Rainer, E-mail: Denis.Kiefel@airbus.com, E-mail: Rainer.Stoessel@airbus.com; Grosse, Christian, E-mail: Grosse@tum.de

2015-03-31

In recent years, an increasing number of safety-relevant structures are designed and manufactured from carbon fiber reinforced polymers (CFRP) in order to reduce weight of airplanes by taking the advantage of their specific strength into account. Non-destructive testing (NDT) methods for quantitative defect analysis of damages are liquid- or air-coupled ultrasonic testing (UT), phased array ultrasonic techniques, and active thermography (IR). The advantage of these testing methods is the applicability on large areas. However, their quantitative information is often limited on impact localization and size. In addition to these techniques, Airbus Group Innovations operates a micro x-ray computed tomography (μ-XCT)more » system, which was developed for CFRP characterization. It is an open system which allows different kinds of acquisition, reconstruction, and data evaluation. One main advantage of this μ-XCT system is its high resolution with 3-dimensional analysis and visualization opportunities, which enables to gain important quantitative information for composite part design and stress analysis. Within this study, different NDT methods will be compared at CFRP samples with specified artificial impact damages. The results can be used to select the most suitable NDT-method for specific application cases. Furthermore, novel evaluation and visualization methods for impact analyzes are developed and will be presented.« less

Nondestructive Testing As a Tool in the Space Shuttle Columbia Accident Investigation

NASA Technical Reports Server (NTRS)

McDanels, Steve

2008-01-01

Nondestructive testing (NDT) played a crucial role in determining the Columbia tragedy's cause. Over 84,000 pieces of debris were recovered; hundreds were subsequently subjected to NDT and materials analysis. Visual NDT of the debris revealed localized areas of damage such as erosion, excessive heating, knife edging and mechanical damage. Three-dimensional reconstructions were made of the left wing leading edge, utilizing a tripod-mounted laser scanning head and focused laser beam, and an advanced topometric optical scanner (ATOS) with digital white light to scan complex-shaped debris, producing monochrome 3-D models. Texture mapping provided a means to capture true colors of the debris and superimpose them on the scanned images. Uniform deposits were found over large portions of debris, obscuring underlying materials. To determine what was beneath, inverse radiography was enlisted. The radiographs guided investigators to where samples should be taken. To ascertain compositions, these samples were subjected to analytical testing, including energy dispersive X-ray spectroscopy and electron microprobe analysis. This combination of visual evidence, radiography, virtual reconstruction, and materials analysis allowed the forensic scientists to verify that a breach occurred in the leading edge of the left wing, the path the plasma followed, and the sequence of events that led to the loss.

Quantification of the Barkhausen noise method for the evaluation of time-dependent degradation

NASA Astrophysics Data System (ADS)

Kim, Dong-Won; Kwon, Dongil

2003-02-01

The Barkhausen noise (BN) method has long been applied to measure the bulk magnetic properties of magnetic materials. Recently, this important nondestructive testing (NDT) method has been applied to evaluate microstructure, stress distribution analysis, fatigue, creep and fracture characteristics. Until now the BN method has been used only qualitatively in evaluating the variation of BN with variations in material properties. For this reason, few NDT methods have been applied in industrial plants and laboratories. The present investigation studied the coercive force and BN while varying the microstructure of ultrafine-grained steels and SA508 cl.3 steels. This variation was carried out according to the second heat-treatment condition with rolling of ultrafine-grained steels and the simulated time-dependent degradation of SA 508 cl.3 steels. An attempt was also made to quantify BN from the relationship between the velocity of magnetic domain walls and the retarding force, using the coercive force of the domain wall movement. The microstructure variation was analyzed according to time-dependent degradation. Fracture toughness was evaluated quantitatively by measuring the BN from two intermediary parameters; grain size and distribution of nonmagnetic particles. From these measurements, the variation of microstructure and fracture toughness can be directly evaluated by the BN method as an accurate in situ NDT method.

Through the looking glass: The future for NDE?

NASA Astrophysics Data System (ADS)

Bond, Leonard J.

2014-02-01

Nondestructive testing (NDT) is a mature industry, with global equipment sales fast moving towards 2B. per year. The use of conventional NDT will grow in developing countries and in developed countries the challenges will include those associated with maintaining aging infrastructure. For some systems the future will move to structural health monitoring (SHM) and for others into integration of online measurements in manufacturing. Nondestructive Evaluation (NDE) is a multi-disciplinary area of endeavor that has its origins in materials science and NDT. It seeks to provide an adequate science base for NDT to become a quantitative science. It was seen to be necessary to better detect, size and type defects, improve the reliability of inspection, and probability of detection (POD). There is particular interest in estimating the potential defects could have on performance or potential for loss of structural integrity, under various loading or stressor conditions, and ultimately implement risk-based reliability assessments. NDE must be seen more as a part of the wide field of engineering, as an interdisciplinary endeavor, that brings together the expertise of materials science and metrology, together with the underlying physics for inspection methods, as well as statistics, computers, robotics and software. The adoption of advanced manufacturing, will require new metrology tools and methods to provide data for assessing new materials including powder metals, as used in additive manufacturing, and various composites. The lessons from the past proceedings of this conference series include that the problems faced today are harder than was expected during the first decade of quantitative NDE research. Even with new types of transducers and much improved A/D and powerful computers new approaches and more basic measurement physics being understood, new insights are needed to provide the data needed to solve many real-world NDE problems, to understand and measure early degradation and to give the required data for remaining safe life or prognostic prediction.

Dairy product consumption is associated with pre-diabetes and newly diagnosed type 2 diabetes in the Lifelines Cohort Study.

PubMed

Brouwer-Brolsma, Elske M; Sluik, Diewertje; Singh-Povel, Cecile M; Feskens, Edith J M

2018-02-01

Previous studies show associations between dairy product consumption and type 2 diabetes, but only a few studies conducted detailed analyses for a variety of dairy subgroups. Therefore, we examined cross-sectional associations of a broad variety of dairy subgroups with pre-diabetes and newly diagnosed type 2 diabetes (ND-T2DM) among Dutch adults. In total, 112 086 adults without diabetes completed a semi-quantitative FFQ and donated blood. Pre-diabetes was defined as fasting plasma glucose (FPG) between 5·6 and 6·9 mmol/l or HbA1c% of 5·7-6·4 %. ND-T2DM was defined as FPG ≥7·0 mmol/l or HbA1c ≥6·5 %. Logistic regression analyses were conducted by 100 g or serving increase and dairy tertiles (T1ref), while adjusting for demographic, lifestyle and dietary covariates. Median dairy product intake was 324 (interquartile range 227) g/d; 25 549 (23 %) participants had pre-diabetes; and 1305 (1 %) had ND-T2DM. After full adjustment, inverse associations were observed of skimmed dairy (OR100 g 0·98; 95 % CI 0·97, 1·00), fermented dairy (OR100 g 0·98; 95 % CI 0·97, 0·99) and buttermilk (OR150 g 0·97; 95 % CI 0·94, 1·00) with pre-diabetes. Positive associations were observed for full-fat dairy (OR100 g 1·003; 95 % CI 1·01, 1·06), non-fermented dairy products (OR100 g 1·01; 95 % CI 1·00, 1·02) and custard (ORserving/150 g 1·13; 95 % CI 1·03, 1·24) with pre-diabetes. Moreover, full-fat dairy products (ORT3 1·16; 95 % CI 0·99, 1·35), non-fermented dairy products (OR100 g 1·05; 95 % CI 1·01, 1·09) and milk (ORserving/150 g 1·08; 95 % CI 1·02, 1·15) were positively associated with ND-T2DM. In conclusion, our data showed inverse associations of skimmed and fermented dairy products with pre-diabetes. Positive associations were observed for full-fat and non-fermented dairy products with pre-diabetes and ND-T2DM.

Energy dispersive CdTe and CdZnTe detectors for spectral clinical CT and NDT applications

NASA Astrophysics Data System (ADS)

Barber, W. C.; Wessel, J. C.; Nygard, E.; Iwanczyk, J. S.

2015-06-01

We are developing room temperature compound semiconductor detectors for applications in energy-resolved high-flux single x-ray photon-counting spectral computed tomography (CT), including functional imaging with nanoparticle contrast agents for medical applications and non-destructive testing (NDT) for security applications. Energy-resolved photon-counting can provide reduced patient dose through optimal energy weighting for a particular imaging task in CT, functional contrast enhancement through spectroscopic imaging of metal nanoparticles in CT, and compositional analysis through multiple basis function material decomposition in CT and NDT. These applications produce high input count rates from an x-ray generator delivered to the detector. Therefore, in order to achieve energy-resolved single photon counting in these applications, a high output count rate (OCR) for an energy-dispersive detector must be achieved at the required spatial resolution and across the required dynamic range for the application. The required performance in terms of the OCR, spatial resolution, and dynamic range must be obtained with sufficient field of view (FOV) for the application thus requiring the tiling of pixel arrays and scanning techniques. Room temperature cadmium telluride (CdTe) and cadmium zinc telluride (CdZnTe) compound semiconductors, operating as direct conversion x-ray sensors, can provide the required speed when connected to application specific integrated circuits (ASICs) operating at fast peaking times with multiple fixed thresholds per pixel provided the sensors are designed for rapid signal formation across the x-ray energy ranges of the application at the required energy and spatial resolutions, and at a sufficiently high detective quantum efficiency (DQE). We have developed high-flux energy-resolved photon-counting x-ray imaging array sensors using pixellated CdTe and CdZnTe semiconductors optimized for clinical CT and security NDT. We have also fabricated high-flux ASICs with a two dimensional (2D) array of inputs for readout from the sensors. The sensors are guard ring free and have a 2D array of pixels and can be tiled in 2D while preserving pixel pitch. The 2D ASICs have four energy bins with a linear energy response across sufficient dynamic range for clinical CT and some NDT applications. The ASICs can also be tiled in 2D and are designed to fit within the active area of the sensors. We have measured several important performance parameters including: the output count rate (OCR) in excess of 20 million counts per second per square mm with a minimum loss of counts due to pulse pile-up, an energy resolution of 7 keV full width at half-maximum (FWHM) across the entire dynamic range, and a noise floor about 20 keV. This is achieved by directly interconnecting the ASIC inputs to the pixels of the CdZnTe sensors incurring very little input capacitance to the ASICs. We present measurements of the performance of the CdTe and CdZnTe sensors including the OCR, FWHM energy resolution, noise floor, as well as the temporal stability and uniformity under the rapidly varying high flux expected in CT and NDT applications.

Energy dispersive CdTe and CdZnTe detectors for spectral clinical CT and NDT applications

PubMed Central

Barber, W. C.; Wessel, J. C.; Nygard, E.; Iwanczyk, J. S.

2014-01-01

We are developing room temperature compound semiconductor detectors for applications in energy-resolved high-flux single x-ray photon-counting spectral computed tomography (CT), including functional imaging with nanoparticle contrast agents for medical applications and non destructive testing (NDT) for security applications. Energy-resolved photon-counting can provide reduced patient dose through optimal energy weighting for a particular imaging task in CT, functional contrast enhancement through spectroscopic imaging of metal nanoparticles in CT, and compositional analysis through multiple basis function material decomposition in CT and NDT. These applications produce high input count rates from an x-ray generator delivered to the detector. Therefore, in order to achieve energy-resolved single photon counting in these applications, a high output count rate (OCR) for an energy-dispersive detector must be achieved at the required spatial resolution and across the required dynamic range for the application. The required performance in terms of the OCR, spatial resolution, and dynamic range must be obtained with sufficient field of view (FOV) for the application thus requiring the tiling of pixel arrays and scanning techniques. Room temperature cadmium telluride (CdTe) and cadmium zinc telluride (CdZnTe) compound semiconductors, operating as direct conversion x-ray sensors, can provide the required speed when connected to application specific integrated circuits (ASICs) operating at fast peaking times with multiple fixed thresholds per pixel provided the sensors are designed for rapid signal formation across the x-ray energy ranges of the application at the required energy and spatial resolutions, and at a sufficiently high detective quantum efficiency (DQE). We have developed high-flux energy-resolved photon-counting x-ray imaging array sensors using pixellated CdTe and CdZnTe semiconductors optimized for clinical CT and security NDT. We have also fabricated high-flux ASICs with a two dimensional (2D) array of inputs for readout from the sensors. The sensors are guard ring free and have a 2D array of pixels and can be tiled in 2D while preserving pixel pitch. The 2D ASICs have four energy bins with a linear energy response across sufficient dynamic range for clinical CT and some NDT applications. The ASICs can also be tiled in 2D and are designed to fit within the active area of the sensors. We have measured several important performance parameters including; the output count rate (OCR) in excess of 20 million counts per second per square mm with a minimum loss of counts due to pulse pile-up, an energy resolution of 7 keV full width at half maximum (FWHM) across the entire dynamic range, and a noise floor about 20keV. This is achieved by directly interconnecting the ASIC inputs to the pixels of the CdZnTe sensors incurring very little input capacitance to the ASICs. We present measurements of the performance of the CdTe and CdZnTe sensors including the OCR, FWHM energy resolution, noise floor, as well as the temporal stability and uniformity under the rapidly varying high flux expected in CT and NDT applications. PMID:25937684

Energy dispersive CdTe and CdZnTe detectors for spectral clinical CT and NDT applications.

PubMed

Barber, W C; Wessel, J C; Nygard, E; Iwanczyk, J S

2015-06-01

We are developing room temperature compound semiconductor detectors for applications in energy-resolved high-flux single x-ray photon-counting spectral computed tomography (CT), including functional imaging with nanoparticle contrast agents for medical applications and non destructive testing (NDT) for security applications. Energy-resolved photon-counting can provide reduced patient dose through optimal energy weighting for a particular imaging task in CT, functional contrast enhancement through spectroscopic imaging of metal nanoparticles in CT, and compositional analysis through multiple basis function material decomposition in CT and NDT. These applications produce high input count rates from an x-ray generator delivered to the detector. Therefore, in order to achieve energy-resolved single photon counting in these applications, a high output count rate (OCR) for an energy-dispersive detector must be achieved at the required spatial resolution and across the required dynamic range for the application. The required performance in terms of the OCR, spatial resolution, and dynamic range must be obtained with sufficient field of view (FOV) for the application thus requiring the tiling of pixel arrays and scanning techniques. Room temperature cadmium telluride (CdTe) and cadmium zinc telluride (CdZnTe) compound semiconductors, operating as direct conversion x-ray sensors, can provide the required speed when connected to application specific integrated circuits (ASICs) operating at fast peaking times with multiple fixed thresholds per pixel provided the sensors are designed for rapid signal formation across the x-ray energy ranges of the application at the required energy and spatial resolutions, and at a sufficiently high detective quantum efficiency (DQE). We have developed high-flux energy-resolved photon-counting x-ray imaging array sensors using pixellated CdTe and CdZnTe semiconductors optimized for clinical CT and security NDT. We have also fabricated high-flux ASICs with a two dimensional (2D) array of inputs for readout from the sensors. The sensors are guard ring free and have a 2D array of pixels and can be tiled in 2D while preserving pixel pitch. The 2D ASICs have four energy bins with a linear energy response across sufficient dynamic range for clinical CT and some NDT applications. The ASICs can also be tiled in 2D and are designed to fit within the active area of the sensors. We have measured several important performance parameters including; the output count rate (OCR) in excess of 20 million counts per second per square mm with a minimum loss of counts due to pulse pile-up, an energy resolution of 7 keV full width at half maximum (FWHM) across the entire dynamic range, and a noise floor about 20keV. This is achieved by directly interconnecting the ASIC inputs to the pixels of the CdZnTe sensors incurring very little input capacitance to the ASICs. We present measurements of the performance of the CdTe and CdZnTe sensors including the OCR, FWHM energy resolution, noise floor, as well as the temporal stability and uniformity under the rapidly varying high flux expected in CT and NDT applications.

Laboratory simulation of high-frequency GPR responses of damaged tunnel liners

NASA Astrophysics Data System (ADS)

Siggins, A. F.; Whiteley, Robert J.

2000-04-01

Concrete lined tunnels and pipelines commonly suffer from damage due to subsidence or poor drainage in the surrounding soils, corrosion of reinforcement if present, and acid vapor leaching of the lining. There is a need to conduct tunnel condition monitoring using non-destructive testing methods (NDT) on a regular basis in many buried installations, for example sewers and storm water drains. A wide variety of NDT methods have been employed in the past to monitor these linings including closed circuit TV (CCTV) inspection, magnetic and various electromagnetic and seismic methods. Ground penetrating radar, GPR, is a promising technique for this application, however there are few systems currently available that can provide the high resolution imaging needed to test the lining. A recently developed Australian GPR system operating at 1400 MHz offers the potential to overcome many of these limitations while maintaining adequate resolution to the rear of the linings which are typically less than 0.5 meters thick. The new high frequency GPR has a nominal resolution of 0.03 m at the center of the pulse band-width. This is a significant improvement over existing radars with the possible exception of some horn based systems. This paper describes the results of a laboratory study on a model tunnel lining using the new 1.4 GHz radar. The model simulated a concrete lining with various degrees of damage including, heavily leached sections, voids and corroded reinforcing. The test results established that the new GPR was capable of imaging subtle variations in the concrete structure and that simulated damage could be detected throughout the liner depth. Furthermore, resolution was found to exceed 0.02 m which was significantly better than expected.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roach, Dennis Patrick; Rackow, Kirk A.

The FAA's Airworthiness Assurance NDI Validation Center, in conjunction with the Commercial Aircraft Composite Repair Committee, developed a set of composite reference standards to be used in NDT equipment calibration for accomplishment of damage assessment and post-repair inspection of all commercial aircraft composites. In this program, a series of NDI tests on a matrix of composite aircraft structures and prototype reference standards were completed in order to minimize the number of standards needed to carry out composite inspections on aircraft. Two tasks, related to composite laminates and non-metallic composite honeycomb configurations, were addressed. A suite of 64 honeycomb panels, representingmore » the bounding conditions of honeycomb construction on aircraft, was inspected using a wide array of NDI techniques. An analysis of the resulting data determined the variables that play a key role in setting up NDT equipment. This has resulted in a set of minimum honeycomb NDI reference standards that include these key variables. A sequence of subsequent tests determined that this minimum honeycomb reference standard set is able to fully support inspections over the full range of honeycomb construction scenarios found on commercial aircraft. In the solid composite laminate arena, G11 Phenolic was identified as a good generic solid laminate reference standard material. Testing determined matches in key velocity and acoustic impedance properties, as well as, low attenuation relative to carbon laminates. Furthermore, comparisons of resonance testing response curves from the G11 Phenolic NDI reference standard was very similar to the resonance response curves measured on the existing carbon and fiberglass laminates. NDI data shows that this material should work for both pulse-echo (velocity-based) and resonance (acoustic impedance-based) inspections.« less

Nonlinear Acoustic and Ultrasonic NDT of Aeronautical Components

NASA Astrophysics Data System (ADS)

Van Den Abeele, Koen; Katkowski, Tomasz; Mattei, Christophe

2006-05-01

In response to the demand for innovative microdamage inspection systems, with high sensitivity and undoubted accuracy, we are currently investigating the use and robustness of several acoustic and ultrasonic NDT techniques based on Nonlinear Elastic Wave Spectroscopy (NEWS) for the characterization of microdamage in aeronautical components. In this report, we illustrate the results of an amplitude dependent analysis of the resonance behaviour, both in time (signal reverberation) and in frequency (sweep) domain. The technique is applied to intact and damaged samples of Carbon Fiber Reinforced Plastics (CFRP) composites after thermal loading or mechanical fatigue. The method shows a considerable gain in sensitivity and an incontestable interpretation of the results for nonlinear signatures in comparison with the linear characteristics. For highly fatigued samples, slow dynamical effects are observed.

Characterization of a new dosimeter for the development of a position-sensitive detector of radioactive sources in industrial NDT equipment

NASA Astrophysics Data System (ADS)

Kim, K. T.; Kim, J. H.; Han, M. J.; Heo, Y. J.; Park, S. K.

2018-02-01

Imaging technology based on gamma-ray sources has been extensively used in non-destructive testing (NDT) to detect any possible internal defects in products without changing their shapes or functions. However, such technology has been subject to increasingly stricter regulations, and an international radiation-safety management system has been recently established. Consequently, radiation source location in NDT systems has become an essential process, given that it can prevent radiation accidents. In this study, we focused on developing a monitoring system that can detect, in real time, the position of a radioactive source in the source guide tube of a projector. We fabricated a lead iodide (PbI2) dosimeter based on the particle-in-binder method, which has a high production yield and facilitates thickness and shape adjustment. Using a gamma-ray source, we then tested the reproducibility, linearity of the dosimeter response, and the dosimeter's percentage interval distance (PID). It was found that the fabricated PbI2 dosimeter yields highly accurate, reproducible, and linear dose measurements. The PID analysis—conducted to investigate the possibility of developing a monitoring system based on the proposed dosimeter—indicated that the valid detection distance was approximately 11.3 cm. The results of this study are expected to contribute to the development of an easily usable radiation monitoring system capable of significantly reducing the risk of radiation accidents.

Improving aircraft composite inspections using optimized reference standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roach, D.; Dorrell, L.; Kollgaard, J.

1998-10-01

The rapidly increasing use of composites on commercial airplanes coupled with the potential for economic savings associated with their use in aircraft structures means that the demand for composite materials technology will continue to increase. Inspecting these composite structures is a critical element in assuring this continued airworthiness. The FAA`s Airworthiness Assurance NDI Validation Center, in conjunction with the Commercial Aircraft Composite Repair committee, is developing a set of composite reference standards to be used in NDT equipment calibration for accomplishment of damage assessment and post-repair inspection of all commercial aircraft composites. In this program, a series of NDI testsmore » on a matrix of composite aircraft structures and prototype reference standards were completed in order to minimize the number of standards needed to carry out composite inspections on aircraft. Two tasks, related to composite laminates and non-metallic composite honeycomb configurations, were addressed.« less

Holographic Techniques for Nondestructive Testing of Tires

DOT National Transportation Integrated Search

1972-04-01

Holographic interferometric techniques were used in a development program to evaluate the feasibility of the technique in the nondestructive testing (NDT) of commercial automobile tires. Passenger tires with built-in defects were holographically insp...

A1297 GPR vs. hydro video clip.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research was ground-coupled ground penetrating radar (G...

Feasibility study of prompt gamma neutron activation for NDT measurement of moisture in stone and brick

DOE Office of Scientific and Technical Information (OSTI.GOV)

Livingston, R. A.; Al-Sheikhly, M.; Grissom, C.

2014-02-18

The conservation of stone and brick architecture or sculpture often involves damage caused by moisture. The feasibility of a NDT method based on prompt gamma neutron activation (PGNA) for measuring the element hydrogen as an indication of water is being evaluated. This includes systematic characterization of the lithology and physical properties of seven building stones and one brick type used in the buildings of the Smithsonian Institution in Washington, D.C. To determine the required dynamic range of the NDT method, moisture-related properties were measured by standard methods. Cold neutron PGNA was also used to determine chemically bound water (CBW) content.more » The CBW does not damage porous masonry, but creates an H background that defines the minimum level of detection of damaging moisture. The CBW was on the order of 0.5% for all the stones. This rules out the measurement of hygric processes in all of the stones and hydric processed for the stones with fine scale pore-size distributions The upper bound of moisture content, set by porosity through water immersion, was on the order of 5%. The dynamic range is about 10–20. The H count rates were roughly 1–3 cps. Taking into account differences in neutron energies and fluxes and sample volume between cold PGNA and a portable PGNA instrument, it appears that it is feasible to apply PGNA in the field.« less

Benefits of GMR sensors for high spatial resolution NDT applications

NASA Astrophysics Data System (ADS)

Pelkner, M.; Stegemann, R.; Sonntag, N.; Pohl, R.; Kreutzbruck, M.

2018-04-01

Magneto resistance sensors like GMR (giant magneto resistance) or TMR (tunnel magneto resistance) are widely used in industrial applications; examples are position measurement and read heads of hard disk drives. However, in case of non-destructive testing (NDT) applications these sensors, although their properties are outstanding like high spatial resolution, high field sensitivity, low cost and low energy consumption, never reached a technical transfer to an application beyond scientific scope. This paper deals with benefits of GMR/TMR sensors in terms of high spatial resolution testing for different NDT applications. The first example demonstrates the preeminent advantages of MR-elements compared with conventional coils used in eddy current testing (ET). The probe comprises one-wire excitation with an array of MR elements. This led to a better spatial resolution in terms of neighboring defects. The second section concentrates on MFL-testing (magnetic flux leakage) with active field excitation during and before testing. The latter illustrated the capability of highly resolved crack detection of a crossed notch. This example is best suited to show the ability of tiny magnetic field sensors for magnetic material characterization of a sample surface. Another example is based on characterization of samples after tensile test. Here, no external field is applied. The magnetization is only changed due to external load and magnetostriction leading to a field signature which GMR sensors can resolve. This gives access to internal changes of the magnetization state of the sample under test.

Post-prandial effects of hazelnut-enriched high fat meal on LDL oxidative status, oxidative and inflammatory gene expression of healthy subjects: a randomized trial.

PubMed

Di Renzo, L; Merra, G; Botta, R; Gualtieri, P; Manzo, A; Perrone, M A; Mazza, M; Cascapera, S; De Lorenzo, A

2017-04-01

Postprandial oxidative stress is characterized by an increased susceptibility of the organism towards oxidative damage after consumption of a meal rich in lipids and/or carbohydrates. Micronutrients modulate the immune system and exert a protective action by reducing low-density lipoproteins oxidation (ox-LDL) via induction of antioxidant enzymes. The clinical study was a randomized and cross-over trial, conducted through the CONSORT flowchart. We evaluated the gene expression of 103 genes related to oxidative stress (HOSp) and human inflammasome pathways (HIp), and ox-LDL level at fasting and after 40 g raw "Tonda Gentile delle Langhe" hazelnut consumption, in association with a McDonald's® Meal (McDM) in 22 healthy human volunteers. Ox-LDL levels significantly increased comparing no dietary treatment (NDT) vs. McDM, and decreased comparing McDM vs. McDM + H (p<0.05). Percentage of significant genes expressed after each dietary treatment were the follows: (A) NDT vs. McDM: 3.88% HIp and 17.48% HOSp; (B) NDT vs. McDM + H: 17.48% HIp and 23.30% HOSp; (C) McDM vs. McDM + H: 17.48% HIp and 33.98% HOSp. Hazelnut consumption reduced post prandial risk factors of atherosclerosis, such as ox-LDL, and the expression of inflammation and oxidative stress related genes. Chronic studies on larger population are necessary before definitive conclusions.

[An assessment of the functional status in the neurorehabilitation of patients after ischemic stroke].

PubMed

Klimkiewicz, Paulina; Klimkiewicz, Robert; Jankowska, Agnieszka; Kubsik, Anna; Widłak, Patrycja; Łukasiak, Adam; Janczewska, Katarzyna; Kociuga, Natalia; Nowakowski, Tomasz; Woldańska-Okońska, Marta

2018-01-01

Introduction: In this article, the authors focused on the symptoms of ischemic stroke and the effect of neurorehabilitation methods on the functional status of patients after ischemic stroke. The aim of the study was to evaluate and compare the functional status of patients after ischemic stroke with improved classic kinesiotherapy, classic kinesiotherapy and NDT-Bobath and classic kinesiotherapy and PNF. Materials and methods: The study involved 120 patients after ischemic stroke. Patients were treated in the Department of Rehabilitation and Physical Medicine USK of Medical University in Lodz. Patients were divided into 3 groups of 40 people. Group 1 was rehabilitated by classical kinesiotherapy. Group 2 was rehabilitated by classic kinesiotherapy and NTD-Bobath. Group 3 was rehabilitated by classical kinesiotherapy and PNF. In all patient groups, magnetostimulation was performed using the Viofor JPS System. The study was conducted twice: before treatment and immediately after 5 weeks after the therapy. The effects of applied neurorehabilitation methods were assessed on the basis of the Rivermead Motor Assessment (RMA). Results: In all three patient groups, functional improvement was achieved. However, a significantly higher improvement was observed in patients in the second group, enhanced with classical kinesitherapy and NDT-Bobath. Conclusions: The use of classical kinesiotherapy combined with the NDT-Bobath method is noticeably more effective in improving functional status than the use only classical kinesiotherapy or combination of classical kinesiotherapy and PNF patients after ischemic stroke.

Development of Active Microwave Thermography for Structural Health Monitoring

NASA Astrophysics Data System (ADS)

Foudazi, Ali

Active Microwave Thermography (AMT) is an integrated nondestructive testing and evaluation (NDT&E) method that incorporates aspects of microwave NDT and thermography techniques. AMT uses a microwave excitation to generate heat and the surface thermal profile of the material or structure under test is subsequently measured using a thermal camera (or IR camera). Utilizing a microwave heat excitation provides advantages over traditional thermal excitations (heat lamps, etc.) including the potential for non-contact, selective and focused heating. During an AMT inspection, two heating mechanisms are possible, referred to as dielectric and induction heating. Dielectric heating occurs as a result of the interaction of microwave energy with lossy dielectric materials which results in dissipated microwave energy and a subsequent increase in temperature. Induction heating is a result of induced surface current on conductive materials with finite conductivity under microwave illumination and subsequently ohmic loss. Due to the unique properties of microwave signals including frequency of operation, power level, and polarization, as well as their interaction with different materials, AMT has strong potential for application in various industries including infrastructure, transportation, aerospace, etc. As such, this Dissertation explores the application of AMT to NDT&E needs in these important industries, including detection and evaluation of defects in single- or multi-layered fiber-reinforced polymer-strengthened cement-based materials, evaluation of steel fiber percentage and distributions in steel fiber reinforced structures, characterization of corrosion ratio on corroded reinforcing steel bars (rebar), and evaluation of covered surface cracks orientation and size in metal structures.

Identification of the Quality Spot Welding used Non Destructive Test-Ultrasonic Testing: (Effect of Welding Time)

NASA Astrophysics Data System (ADS)

Sifa, A.; Endramawan, T.; Badruzzaman

2017-03-01

Resistance Spot Welding (RSW) is frequently used as one way of welding is used in the manufacturing process, especially in the automotive industry [4][5][6][7]. Several parameters influence the process of welding points. To determine the quality of a welding job needs to be tested, either by damaging or testing without damage, in this study conducted experimental testing the quality of welding or identify quality of the nugget by using Non-Destructive Test (NDT) -Ultrasonic Testing (UT), in which the identification of the quality of the welding is done with parameter thickness of worksheet after welding using NDT-UT with use same material worksheet and have more thickness of worksheet, the thickness of the worksheet single plate 1mm, with the capability of propagation Ultrasonic Testing (UT) standard limited> 3 mm [1], welding process parameters such as the time difference between 1-10s and the welding current of 8 KV, visually Heat Affected Zone ( HAZ ) have different results due to the length of time of welding. UT uses a probe that is used with a frequency of 4 MHz, diameter 10 mm, range 100 and the couplant used is oil. Identification techniques using drop 6dB, with sound velocity 2267 m / s of Fe, with the result that the effect of the Welding time affect the size of the HAZ, identification with the lowest time 1s show results capable identified joined through NDT - UT.

Nondestructive evaluation of MoDOT bridge decks : pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Nondestructive evaluation of MoDOT bridge decks : pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition assessments. The primary nondestructive : testing/evaluation (NDT/NDE) technique utilized in this research was ground-coupled ground penetrating radar ...

A1297 hydro demolition video versus GPR results : west bound lane.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

A1193 hydro demolition video versus GPR results : east bound lane.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

A1297 hydro demolition video versus GPR results : east bound lane.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Cdc7-Dbf4 Regulates NDT80 Transcription as Well as Reductional Segregation during Budding Yeast Meiosis

PubMed Central

Lo, Hsiao-Chi; Wan, Lihong; Rosebrock, Adam; Futcher, Bruce

2008-01-01

In budding yeast, as in other eukaryotes, the Cdc7 protein kinase is important for initiation of DNA synthesis in vegetative cells. In addition, Cdc7 has crucial meiotic functions: it facilitates premeiotic DNA replication, and it is essential for the initiation of recombination. This work uses a chemical genetic approach to demonstrate that Cdc7 kinase has additional roles in meiosis. First, Cdc7 allows expression of NDT80, a meiosis-specific transcriptional activator required for the induction of genes involved in exit from pachytene, meiotic progression, and spore formation. Second, Cdc7 is necessary for recruitment of monopolin to sister kinetochores, and it is necessary for the reductional segregation occurring at meiosis I. The use of the same kinase to regulate several distinct meiosis-specific processes may be important for the coordination of these processes during meiosis. PMID:18768747

Electromagnetic Thermography Nondestructive Evaluation: Physics-based Modeling and Pattern Mining

PubMed Central

Gao, Bin; Woo, Wai Lok; Tian, Gui Yun

2016-01-01

Electromagnetic mechanism of Joule heating and thermal conduction on conductive material characterization broadens their scope for implementation in real thermography based Nondestructive testing and evaluation (NDT&E) systems by imparting sensitivity, conformability and allowing fast and imaging detection, which is necessary for efficiency. The issue of automatic material evaluation has not been fully addressed by researchers and it marks a crucial first step to analyzing the structural health of the material, which in turn sheds light on understanding the production of the defects mechanisms. In this study, we bridge the gap between the physics world and mathematical modeling world. We generate physics-mathematical modeling and mining route in the spatial-, time-, frequency-, and sparse-pattern domains. This is a significant step towards realizing the deeper insight in electromagnetic thermography (EMT) and automatic defect identification. This renders the EMT a promising candidate for the highly efficient and yet flexible NDT&E. PMID:27158061

Advanced X-Ray Inspection of Reinforced Carbon Composite Materials on the Orbiter Leading Edge Structural Subsystem (LESS)

NASA Technical Reports Server (NTRS)

Hernandez, Jose M.; Berry, Robert F.; Osborn, Robin; Bueno, Clifford; Osterlitz, Mark; Mills, Richard; Morris, Philip; Phalen, Robert; McNab, Jim; Thibodeaux, Tahanie;

Terahertz Real-Time Imaging Uncooled Arrays Based on Antenna-Coupled Bolometers or FET Developed at CEA-Leti

NASA Astrophysics Data System (ADS)

Simoens, François; Meilhan, Jérôme; Nicolas, Jean-Alain

2015-10-01

Sensitive and large-format terahertz focal plane arrays (FPAs) integrated in compact and hand-held cameras that deliver real-time terahertz (THz) imaging are required for many application fields, such as non-destructive testing (NDT), security, quality control of food, and agricultural products industry. Two technologies of uncooled THz arrays that are being studied at CEA-Leti, i.e., bolometer and complementary metal oxide semiconductor (CMOS) field effect transistors (FET), are able to meet these requirements. This paper reminds the followed technological approaches and focuses on the latest modeling and performance analysis. The capabilities of application of these arrays to NDT and security are then demonstrated with experimental tests. In particular, high technological maturity of the THz bolometer camera is illustrated with fast scanning of large field of view of opaque scenes achieved in a complete body scanner prototype.

Non-destructive testing of ceramic materials using mid-infrared ultrashort-pulse laser

NASA Astrophysics Data System (ADS)

Sun, S. C.; Qi, Hong; An, X. Y.; Ren, Y. T.; Qiao, Y. B.; Ruan, Liming M.

2018-04-01

The non-destructive testing (NDT) of ceramic materials using mid-infrared ultrashort-pulse laser is investigated in this study. The discrete ordinate method is applied to solve the transient radiative transfer equation in 2D semitransparent medium and the emerging radiative intensity on boundary serves as input for the inverse analysis. The sequential quadratic programming algorithm is employed as the inverse technique to optimize objective function, in which the gradient of objective function with respect to reconstruction parameters is calculated using the adjoint model. Two reticulated porous ceramics including partially stabilized zirconia and oxide-bonded silicon carbide are tested. The retrieval results show that the main characteristics of defects such as optical properties, geometric shapes and positions can be accurately reconstructed by the present model. The proposed technique is effective and robust in NDT of ceramics even with measurement errors.

A Review of the Piezoelectric Electromechanical Impedance Based Structural Health Monitoring Technique for Engineering Structures.

PubMed

Na, Wongi S; Baek, Jongdae

2018-04-24

The birth of smart materials such as piezoelectric (PZT) transducers has aided in revolutionizing the field of structural health monitoring (SHM) based on non-destructive testing (NDT) methods. While a relatively new NDT method known as the electromechanical (EMI) technique has been investigated for more than two decades, there are still various problems that must be solved before it is applied to real structures. The technique, which has a significant potential to contribute to the creation of one of the most effective SHM systems, involves the use of a single PZT for exciting and sensing of the host structure. In this paper, studies applied for the past decade related to the EMI technique have been reviewed to understand its trend. In addition, new concepts and ideas proposed by various authors are also surveyed, and the paper concludes with a discussion of the potential directions for future works.

A Review of the Piezoelectric Electromechanical Impedance Based Structural Health Monitoring Technique for Engineering Structures

PubMed Central

Na, Wongi S.; Baek, Jongdae

2018-01-01

The birth of smart materials such as piezoelectric (PZT) transducers has aided in revolutionizing the field of structural health monitoring (SHM) based on non-destructive testing (NDT) methods. While a relatively new NDT method known as the electromechanical (EMI) technique has been investigated for more than two decades, there are still various problems that must be solved before it is applied to real structures. The technique, which has a significant potential to contribute to the creation of one of the most effective SHM systems, involves the use of a single PZT for exciting and sensing of the host structure. In this paper, studies applied for the past decade related to the EMI technique have been reviewed to understand its trend. In addition, new concepts and ideas proposed by various authors are also surveyed, and the paper concludes with a discussion of the potential directions for future works. PMID:29695067

CIDOC-CRM extensions for conservation processes: A methodological approach

NASA Astrophysics Data System (ADS)

Vassilakaki, Evgenia; Zervos, Spiros; Giannakopoulos, Georgios

2015-02-01

This paper aims to report the steps taken to create the CIDOC Conceptual Reference Model (CIDOC-CRM) extensions and the relationships established to accommodate the depiction of conservation processes. In particular, the specific steps undertaken for developing and applying the CIDOC-CRM extensions for defining the conservation interventions performed on the cultural artifacts of the National Archaeological Museum of Athens, Greece are presented in detail. A report on the preliminary design of the DOC-CULTURE project (Development of an integrated information environment for assessment and documentation of conservation interventions to cultural works/objects with nondestructive testing techniques [NDTs], www.ndt-lab.gr/docculture), co-financed by the European Union NSRF THALES program, can be found in Kyriaki-Manessi, Zervos & Giannakopoulos (1) whereas the NDT&E methods and their output data through CIDOC-CRM extension of the DOC-CULTURE project approach to standardize the documentation of the conservation were further reported in Kouis et al. (2).

I-SonReb: an improved NDT method to evaluate the in situ strength of carbonated concrete

NASA Astrophysics Data System (ADS)

Breccolotti, Marco; Bonfigli, Massimo F.

2015-10-01

Concrete strength evaluated in situ by means of the conventional SonReb method can be highly overestimated in presence of carbonation. This latter, in fact, is responsible for the physical and chemical alteration of the outer layer of concrete. As most of the existing concrete structures are subjected to carbonation, it is of high importance to overcome this problem. In this paper, an Improved SonReb method (I-SonReb) for carbonated concretes is proposed. It relies on the definition of a correction coefficient of the measured Rebound index as a function of the carbonated concrete cover thickness, an additional parameter to be measured during in situ testing campaigns. The usefulness of the method has been validated showing the improvement in the accuracy of concrete strength estimation from two sets of NDT experimental data collected from investigations on real structures.

A novel ultrasonic phased array inspection system to NDT for offshore platform structures

NASA Astrophysics Data System (ADS)

Wang, Hua; Shan, Baohua; Wang, Xin; Ou, Jinping

2007-01-01

A novel ultrasonic phased array detection system is developed for nondestructive testing (NDT). The purpose of the system is to make acquisition of data in real-time from 64-element ultrasonic phased array transducer, and to enable real- time processing of the acquired data. The system is composed of five main parts: master unit, main board, eight transmit/receive units, a 64-element transducer and an external PC. The system can be used with 64 element transducers, excite 32 elements, receive and sample echo signals form 32 elements simultaneously at 62.5MHz with 8 bit precision. The external PC is used as the user interface showing the real time images and controls overall operation of the system through USB serial link. The use of Universal Serial Bus (USB) improves the transform speed and reduces hardware interface complexity. The program of the system is written in Visual C++.NET and is platform independent.

New customizable phased array UT instrument opens door for furthering research and better industrial implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dao, Gavin; Ginzel, Robert

2014-02-18

Phased array UT as an inspection technique in itself continues to gain wide acceptance. However, there is much room for improvement in terms of implementation of Phased Array (PA) technology for every unique NDT application across several industries (e.g. oil and petroleum, nuclear and power generation, steel manufacturing, etc.). Having full control of the phased array instrument and customizing a software solution is necessary for more seamless and efficient inspections, from setting the PA parameters, collecting data and reporting, to the final analysis. NDT researchers and academics also need a flexible and open platform to be able to control variousmore » aspects of the phased array process. A high performance instrument with advanced PA features, faster data rates, a smaller form factor, and capability to adapt to specific applications, will be discussed.« less

Comparison and analysis of two modern methods in the structural health monitoring techniques in aerospace

NASA Astrophysics Data System (ADS)

Riahi, Mohammad; Ahmadi, Alireza

2016-04-01

Role of air transport in the development and expansion of world trade leading to economic growth of different countries is undeniable. Continuing the world's trade sustainability without expansion of aerospace is next to impossible. Based on enormous expenses for design, manufacturing and maintenance of different aerospace structures, correct and timely diagnosis of defects in those structures to provide for maximum safety has the highest importance. Amid all this, manufacturers of commercial and even military aircrafts are after production of less expensive, lighter, higher fuel economy and nonetheless, higher safety. As such, two events has prevailed in the aerospace industries: (1) Utilization of composites for the fuselage as well as other airplane parts, (2) using modern manufacturing methods. Arrival of two these points have created the need for upgrading of the present systems as well as innovating newer methods in diagnosing and detection of defects in aerospace structures. Despite applicability of nondestructive testing (NDT) methods in aerospace for decades, due to some limitations in the defect detection's certainty, particularly for composite material and complex geometries, shadow of doubt has fallen on maintaining complete confidence in using NDT. These days, two principal approach are ahead to tackle the above mentioned problems. First, approach for the short range is the creative and combinational mean to increase the reliability of NDT and for the long run, innovation of new methods on the basis of structural health monitoring (SHM) is in order. This has led to new philosophy in the maintenance area and in some instances; field of design has also been affected by it.

Evaluation of SHM system produced by additive manufacturing via acoustic emission and other NDT methods.

PubMed

Strantza, Maria; Aggelis, Dimitrios G; de Baere, Dieter; Guillaume, Patrick; van Hemelrijck, Danny

2015-10-21

During the last decades, structural health monitoring (SHM) systems are used in order to detect damage in structures. We have developed a novel structural health monitoring approach, the so-called "effective structural health monitoring" (eSHM) system. The current SHM system is incorporated into a metallic structure by means of additive manufacturing (AM) and has the possibility to advance life safety and reduce direct operative costs. It operates based on a network of capillaries that are integrated into an AM structure. The internal pressure of the capillaries is continuously monitored by a pressure sensor. When a crack nucleates and reaches the capillary, the internal pressure changes signifying the existence of the flaw. The main objective of this paper is to evaluate the crack detection capacity of the eSHM system and crack location accuracy by means of various non-destructive testing (NDT) techniques. During this study, detailed acoustic emission (AE) analysis was applied in AM materials for the first time in order to investigate if phenomena like the Kaiser effect and waveform parameters used in conventional metals can offer valuable insight into the damage accumulation of the AM structure as well. Liquid penetrant inspection, eddy current and radiography were also used in order to confirm the fatigue damage and indicate the damage location on un-notched four-point bending AM metallic specimens with an integrated eSHM system. It is shown that the eSHM system in combination with NDT can provide correct information on the damage condition of additive manufactured metals.

Evaluation of SHM System Produced by Additive Manufacturing via Acoustic Emission and Other NDT Methods

PubMed Central

Strantza, Maria; Aggelis, Dimitrios G.; de Baere, Dieter; Guillaume, Patrick; van Hemelrijck, Danny

2015-01-01

During the last decades, structural health monitoring (SHM) systems are used in order to detect damage in structures. We have developed a novel structural health monitoring approach, the so-called “effective structural health monitoring” (eSHM) system. The current SHM system is incorporated into a metallic structure by means of additive manufacturing (AM) and has the possibility to advance life safety and reduce direct operative costs. It operates based on a network of capillaries that are integrated into an AM structure. The internal pressure of the capillaries is continuously monitored by a pressure sensor. When a crack nucleates and reaches the capillary, the internal pressure changes signifying the existence of the flaw. The main objective of this paper is to evaluate the crack detection capacity of the eSHM system and crack location accuracy by means of various non-destructive testing (NDT) techniques. During this study, detailed acoustic emission (AE) analysis was applied in AM materials for the first time in order to investigate if phenomena like the Kaiser effect and waveform parameters used in conventional metals can offer valuable insight into the damage accumulation of the AM structure as well. Liquid penetrant inspection, eddy current and radiography were also used in order to confirm the fatigue damage and indicate the damage location on un-notched four-point bending AM metallic specimens with an integrated eSHM system. It is shown that the eSHM system in combination with NDT can provide correct information on the damage condition of additive manufactured metals. PMID:26506349

Assessment of non-destructive testing technologies for quality control/quality assurance of asphalt mixtures : [tech transfer summary].

DOT National Transportation Integrated Search

2015-02-01

Evaluation of the actual performance (quality) of pavements requires : in situ nondestructive testing (NDT) techniques that can accurately : measure the most critical, objective, and sensitive properties of : pavement systems.

Characterization of Stress Corrosion Cracking Using Laser Ultrasonics

DOT National Transportation Integrated Search

2008-08-31

In-service inspection of gas and oil pipelines is a subject of great current interest. Issues of safety and fitness for service have driven extensive efforts to develop effective monitoring and inspection techniques. A number of effective NDT techniq...

Bridge A1187 : Missouri S&T nondestructive evaluation of bridge decks - pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Comprehensive bridge deck deterioration mapping of nine bridges by nondestructive evaluation technologies.

DOT National Transportation Integrated Search

2011-01-01

The primary objective of this research was to demonstrate the benefits of NDT technologies for effectively detecting : and characterizing deterioration in bridge decks. In particular, the objectives were to demonstrate the capabilities of : ground-pe...

Bridge A3406 : Missouri S&T nondestructive evaluation of bridge decks - pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Bridge A1479 : Missouri S&T nondestructive evaluation of bridge decks - pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Bridge A2966 : Missouri S&T nondestructive evaluation of bridge decks - pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Bridge A2111 : Missouri S&T nondestructive evaluation of bridge decks - pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Bridge A1297 : Missouri S&T nondestructive evaluation of bridge decks - pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Bridge A1193 : Missouri S&T nondestructive evaluation of bridge decks - pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Bridge A0569 : Missouri S&T nondestructive evaluation of bridge decks - pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Bridge K0197 : Missouri S&T nondestructive evaluation of bridge decks - pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Bridge A3017 : Missouri S&T nondestructive evaluation of bridge decks - pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

Bridge A3405 : Missouri S&T nondestructive evaluation of bridge decks - pilot study.

DOT National Transportation Integrated Search

2014-03-01

This research has examined the use of nondestructive techniques for concrete bridge deck condition : assessments. The primary nondestructive testing/evaluation (NDT/NDE) technique utilized in this research : was ground-coupled ground penetrating rada...

34 CFR 669.1 - What is the Language Resource Centers Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the Language Resource Centers Program? 669.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION LANGUAGE RESOURCE CENTERS PROGRAM General § 669.1 What is the Language Resource Centers Program? The Language Resource Centers Program makes awards, through grants or...

34 CFR 669.1 - What is the Language Resource Centers Program?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false What is the Language Resource Centers Program? 669.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION LANGUAGE RESOURCE CENTERS PROGRAM General § 669.1 What is the Language Resource Centers Program? The Language Resource Centers Program makes awards, through grants or...

Laboratory R-value vs. in-situ NDT methods.

DOT National Transportation Integrated Search

2006-05-01

The New Mexico Department of Transportation (NMDOT) uses the Resistance R-Value as a quantifying parameter in subgrade and base course design. The parameter represents soil strength and stiffness and ranges from 1 to 80, 80 being typical of the highe...

Air-launched GPR evaluation for rapid assessment of MoDOT bridge decks.

DOT National Transportation Integrated Search

2014-08-01

The overarching goal of this study is to demonstrate that advanced nondestructive testing/evaluation (NDT/NDE) techniques can be rapidly, effectively, and economically implemented as part of routine MoDOT bridge deck surveys to determine the general ...

Thermographic testing used on the X-33 space launch vehicle program by BFGoodrich Aerospace

NASA Astrophysics Data System (ADS)

Burleigh, Douglas D.

1999-03-01

The X-33 program is a team effort sponsored by NASA under Cooperative Agreement NCC8-115, and led by the Lockheed Martin Corporation. Team member BFGoodrich Aerospace Aerostructures Group (formerly Rohr) is responsible for design, manufacture, and integration of the Thermal Protection System (TPS) of the X-33 launch vehicle. The X-33 is a half-scale, experimental prototype of a vehicle called RLV (Reusable Launch Vehicle) or VentureStarTM, an SSTO (single stage to orbit) vehicle, which is a proposed successor to the aging Space Shuttle. Thermographic testing has been employed by BFGoodrich Aerospace Aerostructures Group for a wide variety of uses in the testing of components of the X-33. Thermographic NDT (TNDT) has been used for inspecting large graphite- epoxy/aluminum honeycomb sandwich panels used on the Leeward Aeroshell structure of the X-33. And TNDT is being evaluated for use in inspecting carbon-carbon composite parts such as the nosecap and wing leading edge components. Pulsed Infrared Testing (PIRT), a special form of TNDT, is used for the routine inspection of sandwich panels made of brazed inconel honeycomb and facesheets. In the developmental and qualification testing of sub-elements of the X-33, thermography has been used to monitor (1) Arc Jet tests at NASA Ames Research Center in Mountain view, CA and NASA Johnson Space Center in Houston, TX, (2) High Temperature (wind) Tunnel Tests (HTT) at Nasa Langley Research Center in Langley, VA, and (3) Hot Gas Tests at NASA Marshall Space Flight Center in Huntsville, AL.

34 CFR 656.1 - What is the National Resource Centers Program?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false What is the National Resource Centers Program? 656.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION NATIONAL RESOURCE CENTERS PROGRAM FOR FOREIGN LANGUAGE AND AREA... Centers Program? Under the National Resource Centers Program for Foreign Language and Areas Studies or...

34 CFR 656.1 - What is the National Resource Centers Program?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 3 2012-07-01 2012-07-01 false What is the National Resource Centers Program? 656.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION NATIONAL RESOURCE CENTERS PROGRAM FOR FOREIGN LANGUAGE AND AREA... Centers Program? Under the National Resource Centers Program for Foreign Language and Areas Studies or...

34 CFR 656.1 - What is the National Resource Centers Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the National Resource Centers Program? 656.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION NATIONAL RESOURCE CENTERS PROGRAM FOR FOREIGN LANGUAGE AND AREA... Centers Program? Under the National Resource Centers Program for Foreign Language and Areas Studies or...

34 CFR 656.1 - What is the National Resource Centers Program?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 3 2014-07-01 2014-07-01 false What is the National Resource Centers Program? 656.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION NATIONAL RESOURCE CENTERS PROGRAM FOR FOREIGN LANGUAGE AND AREA... Centers Program? Under the National Resource Centers Program for Foreign Language and Areas Studies or...

34 CFR 656.1 - What is the National Resource Centers Program?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 3 2013-07-01 2013-07-01 false What is the National Resource Centers Program? 656.1... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION NATIONAL RESOURCE CENTERS PROGRAM FOR FOREIGN LANGUAGE AND AREA... Centers Program? Under the National Resource Centers Program for Foreign Language and Areas Studies or...

76 FR 4451 - Privacy Act of 1974; Report of Modified or Altered System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

..., Atlanta Human Resources Center (AHRC), Centers for Disease Control and Prevention (CDC), Department of... maintained by the Atlanta Human Resources Center (AHRC), Scientific Resources Program, Material, Data and...) Centers for Disease Control and Prevention (CDC) Atlanta Human Resources Center (AHRC) Fellowship Program...

The use of portable Non-Destructive Techniques for material decay characterisation of palaeontological Geosites

NASA Astrophysics Data System (ADS)

Gomez-Heras, Miguel; Ortega-Becerril, Jose A.; López-Martínez, Jerónimo; Oliva-Urcia, Belén; Maestro, Adolfo

2017-04-01

The conservation of both natural and cultural heritage is regarded as a priority for humankind and it is therefore recognised by the UNESCO since the Convention Concerning the Protection of the World Cultural and Natural Heritage in 1972. The International Union of Geological Sciences launched in 1995 in collaboration with UNESCO the Global Geosites programme to create an inventory of geological heritage sites. Although the conservation of Geosites may face different issues to those of stone-built cultural heritage, much could be learnt from techniques initially used to characterise weathering and material decay in stone-built cultural heritage. This is especially the case for portable Non-Destructive Techniques (NDT). Portable NDT allow characterising on-site the degree of material decay and are, therefore, a good way to assess the state of conservation of certain Geosites whose relevance lies on localised features. Geosites chosen for the outstanding occurrence of dinosaur ichnites, such as those in the Cameros Massif (north-western part of the Iberian Range, Spain), are a good example of this. This communication explores the potential of portable NDT to characterise the state of decay and susceptibility to further decay of dinosaur ichnites in the Cameros Massif. These techniques included: Ultrasound Pulse Velocity determination, Leeb hardness rebound test, colour determination by means of a spectrophotometer and thermal imaging obtained with an infrared camera. Results will show the potential of these techniques to characterise differential weathering patterns in both individual ichnites as well as on tracks in addition to assessing the possible effects of conservation strategies on the long-term preservation of the mentioned Geosites. Research funded by Madrid's Regional Government project Geomateriales 2 S2013/MIT-2914

Can we prevent hip dislocation in children with cerebral palsy? Effects of postural management.

PubMed

Picciolini, Odoardo; LE Métayer, Michel; Consonni, Dario; Cozzaglio, Massimo; Porro, Matteo; Gasparroni, Verusca; Panou, Artemisia; Mosca, Fabio; Portinaro, Nicola M

2016-10-01

Hip dislocation is common in children with cerebral palsy (CP). At birth they do not have musculoskeletal deformities but they develop over time due to the combined effects of the movement disorder and impaired gross motor function. Early detection and treatment of a hip at risk is needed to modify the natural of hip development in CP. The aim of this study was to determine the effect of postural management treatment on hip displacement's progression in children CP. Prospective comparative non-randomized study. Rehabilitative outpatient unit. Fifty-one children with CP were studied; the treated group (N.=30) was compared to a control group (N.=21). The treated group followed a two year's long combined treatment program consisting a neurodevelopment treatment (NDT) two times a week and a 5 hours daily siège moulé postural program. The control group underwent only NDT twice a week for two years. Hip radiographs were measured with the migration percentage (MP) method at baseline, at 1 and 2 years of follow-up. A significant difference has been observed in the MP (%) trend (P<0.001) between treatment and control groups. At 2 years, there was a marked worsening (MP from 23.0 to 37.7) in the control group, compared to the stability (from 28.8 to 26.8) in the treatment group. This study supports the evidence that conservative postural management of hip deformity is useful to prevent the natural progression of hip dislocation. Hip radiographic follow up program together with NDT and postural management program is useful to modify the natural progression of hip dislocation in children with CP.

Theoretical characterization and design of small molecule donor material containing naphthodithiophene central unit for efficient organic solar cells.

PubMed

Duan, Yu-Ai; Geng, Yun; Li, Hai-Bin; Jin, Jun-Ling; Wu, Yong; Su, Zhong-Min

2013-07-15

To seek for high-performance small molecule donor materials used in heterojunction solar cell, six acceptor-donor-acceptor small molecules based on naphtho[2,3-b:6,7-b']dithiophene (NDT) units with different acceptor units were designed and characterized using density functional theory and time-dependent density functional theory. Their geometries, electronic structures, photophysical, and charge transport properties have been scrutinized comparing with the reported donor material NDT(TDPP)2 (TDPP  =  thiophene-capped diketopyrrolopyrrole). The open circuit voltage (V(oc)), energetic driving force(ΔE(L-L)), and exciton binding energy (E(b)) were also provided to give an elementary understanding on their cell performance. The results reveal that the frontier molecular orbitals of 3-7 match well with the acceptor material PC61 BM, and compounds 3-5 were found to exhibit the comparable performances to 1 and show promising potential in organic solar cells. In particular, comparing with 1, system 7 with naphthobisthiadiazole acceptor unit displays broader absorption spectrum, higher V(oc), lower E(b), and similar carrier mobility. An in-depth insight into the nature of the involved excited states based on transition density matrix and charge density difference indicates that all S1 states are mainly intramolecular charge transfer states with the charge transfer from central NDT unit to bilateral acceptor units, and also imply that the exciton of 7 can be dissociated easily due to its large extent of the charge transfer. In a word, 7 maybe superior to 1 and may act as a promising donor candidate for organic solar cell. Copyright © 2013 Wiley Periodicals, Inc.

Simulation Study of the Localization of a Near-Surface Crack Using an Air-Coupled Ultrasonic Sensor Array

PubMed Central

Delrue, Steven; Aleshin, Vladislav; Sørensen, Mikael; De Lathauwer, Lieven

2017-01-01

The importance of Non-Destructive Testing (NDT) to check the integrity of materials in different fields of industry has increased significantly in recent years. Actually, industry demands NDT methods that allow fast (preferably non-contact) detection and localization of early-stage defects with easy-to-interpret results, so that even a non-expert field worker can carry out the testing. The main challenge is to combine as many of these requirements into one single technique. The concept of acoustic cameras, developed for low frequency NDT, meets most of the above-mentioned requirements. These cameras make use of an array of microphones to visualize noise sources by estimating the Direction Of Arrival (DOA) of the impinging sound waves. Until now, however, because of limitations in the frequency range and the lack of integrated nonlinear post-processing, acoustic camera systems have never been used for the localization of incipient damage. The goal of the current paper is to numerically investigate the capabilities of locating incipient damage by measuring the nonlinear airborne emission of the defect using a non-contact ultrasonic sensor array. We will consider a simple case of a sample with a single near-surface crack and prove that after efficient excitation of the defect sample, the nonlinear defect responses can be detected by a uniform linear sensor array. These responses are then used to determine the location of the defect by means of three different DOA algorithms. The results obtained in this study can be considered as a first step towards the development of a nonlinear ultrasonic camera system, comprising the ultrasonic sensor array as the hardware and nonlinear post-processing and source localization software. PMID:28441738

Development of Natural Flaw Samples for Evaluating Nondestructive Testing Methods for Foam Thermal Protection Systems

NASA Technical Reports Server (NTRS)

Workman, Gary L.; Davis, Jason; Farrington, Seth; Walker, James

2007-01-01

Low density polyurethane foam has been an important insulation material for space launch vehicles for several decades. The potential for damage from foam breaking away from the NASA External Tank was not realized until the foam impacts on the Columbia Orbiter vehicle caused damage to its Leading Edge thermal protection systems (TPS). Development of improved inspection techniques on the foam TPS is necessary to prevent similar occurrences in the future. Foamed panels with drilled holes for volumetric flaws and Teflon inserts to simulate debonded conditions have been used to evaluate and calibrate nondestructive testing (NDT) methods. Unfortunately the symmetric edges and dissimilar materials used in the preparation of these simulated flaws provide an artificially large signal while very little signal is generated from the actual defects themselves. In other words, the same signal are not generated from the artificial defects in the foam test panels as produced when inspecting natural defect in the ET foam TPS. A project to create more realistic voids similar to what actually occurs during manufacturing operations was began in order to improve detection of critical voids during inspections. This presentation describes approaches taken to create more natural voids in foam TPS in order to provide a more realistic evaluation of what the NDT methods can detect. These flaw creation techniques were developed with both sprayed foam and poured foam used for insulation on the External Tank. Test panels with simulated defects have been used to evaluate NDT methods for the inspection of the External Tank. A comparison of images between natural flaws and machined flaws generated from backscatter x-ray radiography, x-ray laminography, terahertz imaging and millimeter wave imaging show significant differences in identifying defect regions.

Quality and monitoring of structural rehabilitation measures , part 2 : review and assessment of non-destructive testing (NDT) techniques.

DOT National Transportation Integrated Search

2002-03-01

As CFRP composites continue to gain acceptance in structural rehabilitation of deteriorating infrastructure, the consequent need for comprehensive and rapid in-situ quality assessment has arisen. Conditioned by the inevitable presence of material-, i...

Developing Integrated Programs: A Transdisciplinary Approach for Early Intervention.

ERIC Educational Resources Information Center

Coling, Marcia Cain

This book presents an amalgam of early intervention ideas from the fields of education, occupational therapy, and physical therapy for children with developmental delays. An introductory chapter describes the approach's three theoretical bases: neurodevelopmental treatment (NDT), sensory integration, and Piagetian theory. Chapter 1 considers…

Kilbuck terrane: oldest known rocks in Alaska

USGS Publications Warehouse

Box, S.E.; Moll-Stalcup, E. J.; Wooden, J.L.; Bradshaw, J.Y.

1990-01-01

The Kilbuck terrane in southwestern Alaska is a narrow, thin crustal sliver or flake of amphibolite facies orthogneiss. The igneous protolith of this gneiss was a suite of subduction-related plutonic rocks. U-Pb data on zircons from trondhjemitic and granitic samples yield upper-intercept (igneous) ages of 2070 ?? 16 and 2040 ?? 74 Ma, respectively. Nd isotope data from these rocks suggest that a diorite-tonalite-trondhjemite suite (??Nd[T] = +2.1 to +2.7; T is time of crystallization) evolved from partial melts of depleted mantle with no discernible contamination by older crust, whereas a coeval granitic pluton (??Nd[T] = -5.7) contains a significant component derived from Archean crust. Orthogneisses with similar age and Nd isotope characteristics are found in the Idono complex 250 km to the north. Early Proterozoic rocks are unknown elsewhere in Alaska. The possibility that the Kilbuck terrane was displaced from provinces of similar age in other cratons (e.g., Australian, Baltic, Guiana, and west African shields), or from the poorly dated Siberian craton, cannot be excluded. -from Authors

Infrared thermography for inspecting of pipeline specimen

NASA Astrophysics Data System (ADS)

Chen, Dapeng; Li, Xiaoli; Sun, Zuoming; Zhang, Xiaolong

2018-02-01

Infrared thermography is a fast and effective non-destructive testing method, which has an increasing application in the field of Aeronautics, Astronautic, architecture and medical, et al. Most of the reports about the application of this technology are focus on the specimens of planar, pulse light is often used as the heat stimulation and a plane heat source is generated on the surface of the specimen by the using of a lampshade, however, this method is not suitable for the specimen of non-planar, such as the pipeline. Therefore, in this paper, according the NDT problem of a steel and composite pipeline specimen, ultrasonic and hot water are applied as the heat source respectively, and an IR camera is used to record the temperature varies of the surface of the specimen, defects are revealed by the thermal images sequence processing. Furthermore, the results of light pulse thermography are also shown as comparison, it is indicated that choose the right stimulation method, can get a more effective NDT results for the pipeline specimen.

Modeling NDT piezoelectric ultrasonic transmitters.

PubMed

San Emeterio, J L; Ramos, A; Sanz, P T; Ruíz, A; Azbaid, A

2004-04-01

Ultrasonic NDT applications are frequently based on the spike excitation of piezoelectric transducers by means of efficient pulsers which usually include a power switching device (e.g. SCR or MOS-FET) and some rectifier components. In this paper we present an approximate frequency domain electro-acoustic model for pulsed piezoelectric ultrasonic transmitters which, by integrating partial models of the different stages (driving electronics, tuning/matching networks and broadband piezoelectric transducer), allows the computation of the emission transfer function and output force temporal waveform. An approximate frequency domain model is used for the evaluation of the electrical driving pulse from the spike generator. Tuning circuits, interconnecting cable and mechanical impedance matching layers are modeled by means of transmission lines and the classical quadripole approach. The KLM model is used for the piezoelectric transducer. In addition, a PSPICE scheme is used for an alternative simulation of the broadband driving spike, including the accurate evaluation of non-linear driving effects. Several examples illustrate the capabilities of the specifically developed software.

Application of finite elements heterogeneous multi-scale method to eddy currents non destructive testing of carbon composites material

NASA Astrophysics Data System (ADS)

Khebbab, Mohamed; Feliachi, Mouloud; El Hadi Latreche, Mohamed

2018-03-01

In this present paper, a simulation of eddy current non-destructive testing (EC NDT) on unidirectional carbon fiber reinforced polymer is performed; for this magneto-dynamic formulation in term of magnetic vector potential is solved using finite element heterogeneous multi-scale method (FE HMM). FE HMM has as goal to compute the homogenized solution without calculating the homogenized tensor explicitly, the solution is based only on the physical characteristic known in micro domain. This feature is well adapted to EC NDT to evaluate defect in carbon composite material in microscopic scale, where the defect detection is performed by coil impedance measurement; the measurement value is intimately linked to material characteristic in microscopic level. Based on this, our model can handle different defects such as: cracks, inclusion, internal electrical conductivity changes, heterogeneities, etc. The simulation results were compared with the solution obtained with homogenized material using mixture law, a good agreement was found.

Nondestructive testing based on scanning-from-heating approach: application to nonthrough defect detection and fiber orientation assessment

NASA Astrophysics Data System (ADS)

Belkacemi, Mohamed; Stolz, Christophe; Mathieu, Alexandre; Lemaitre, Guillaume; Massich, Joan; Aubreton, Olivier

2015-11-01

Today, industries ensure the quality of their manufactured products through computer vision techniques and nonconventional imaging. Three-dimensional (3-D) scanners and nondestructive testing (NDT) systems are commonly used independently for such applications. Furthermore, these approaches combined constitute hybrid systems, providing a 3-D reconstruction and NDT analysis. These systems, however, suffer from drawbacks such as errors during the data fusion and higher cost for manufacturers. In an attempt to solve these problems, a single active thermography system based on scanning-from-heating is proposed in this paper. In addition to 3-D digitization of the object, our contributions are twofold: (1) the nonthrough defect detection for a homogeneous metallic object and (2) fiber orientation assessment for a long fiber composite material. The experiments on steel and aluminum plates show that our method achieves the detection of nonthrough defects. Additionally, the estimation of the fiber orientation is evaluated on carbon-fiber composite material.

Integration of terrestrial laser scanner, ultrasonic and petrographical data in the diagnostic process on stone building materials

NASA Astrophysics Data System (ADS)

Casula, Giuseppe; Fais, Silvana; Giovanna Bianchi, Maria; Cuccuru, Francesco; Ligas, Paola

2015-04-01

The Terrestrial Laser Scanner (TLS) is a modern contactless non-destructive technique (NDT) useful to 3D-model complex-shaped objects with a few hours' field survey. A TLS survey produces very dense point clouds made up of coordinates of point and radiometric information given by the reflectivity parameter i.e. the ratio between the amount of energy emitted by the sensor and the energy reflected by the target object. Modern TLSs used in architecture are phase instruments where the phase difference obtained by comparing the emitted laser pulse with the reflected one is proportional to the sensor-target distance expressed as an integer multiple of the half laser wavelength. TLS data are processed by registering point clouds i.e. by referring them to the same reference frame and by aggregation after a fine registration procedure. The resulting aggregate point cloud can be compared with graphic primitives as single or multiple planes, cylinders or spheres, and the resulting residuals give a morphological map that affords information about the state of conservation of the building materials used in historical or modern buildings, in particular when compared with other NDT techniques. In spite of its great productivity, the TLS technique is limited in that it is unable to penetrate the investigated materials. For this reason both the 3D residuals map and the reflectivity map need to be correlated with the results of other NDT techniques such as the ultrasonic method, and a complex study of the composition of building materials is also necessary. The application of a methodology useful to evaluate the quality of stone building materials and locate altered or damaged zones is presented in this study based on the integrated application of three independent techniques, two non destructive such as the TLS and the ultrasonic techniques in the 24-54 kHz range, and a third to analyze the petrographical characteristics of the stone materials, mainly the texture, with optical and scanning electronic microscopy (SEM). A very interesting case study is presented on a carbonate stone door of great architectural and historical interest, well suited to a high definition survey . This architectural element is inside the "Palazzo di Città" museum in the historical center of the Town of Cagliari, Sardinia (Italy). The integrated application of TLS and in situ and laboratory ultrasonic techniques, enhanced by the knowledge of the petrographic characteristics of the rocks, improves the diagnostic process and affords reliable information on the state of conservation of the stones used to build it. The integrated use of the above non destructive techniques also provides suitable data for a possible restoration and future preservation. Acknowledgments: This work was financially supported by Sardinian Local Administration (RAS - LR 7,August 2007, n.7, Promotion of Scientific Research and Innovation in Sardinia - Italy, Responsible Scientist: S.Fais).

Evaluation of concrete structures affected by alkali-silica reaction and delayed ettringite formation - part 2.

DOT National Transportation Integrated Search

2012-12-01

This report details the results of a comprehensive research project aimed at evaluating the potential use of : non-destructive testing (NDT) to assess structures affected by ASR and/or DEF. This project was a : collaborative effort between the Univer...

Neurodevelopmental Treatment (NDT): Therapeutic Intervention and Its Efficacy.

ERIC Educational Resources Information Center

Stern, Francine Martin; Gorga, Delia

1988-01-01

Use of neurodevelopmental treatment, also known as the Bobath method, is discussed, including its history, philosophy, goals, and treatment emphasis with infants and children with movement disorders. Examples of children before and after therapeutic intervention illustrate use of the technique, and controversies in measuring therapy efficacy are…

Use of NDT equipment for construction quality control of hot mix asphalt pavements

DOT National Transportation Integrated Search

2006-08-01

The focus of the study has been to evaluate the utility of seismic methods in the quality management of the hot mix asphalt layers. Procedures are presented to measure the target field moduli of hot mix asphalt (HMA) with laboratory seismic methods, ...

Reproducibility of and sex differences in common orthopaedic ankle and foot tests in runners

PubMed Central

2014-01-01

Background For future etiologic cohort studies in runners it is important to identify whether (hyper)pronation of the foot, decreased ankle joint dorsiflexion (AJD) and the degree of the extension of the first Metatarsophalangeal joint (MTP1) are risk factors for running injuries and to determine possible sex differences. These parameters are frequently determined with the navicular drop test (NDT) Stance and Single Limb-Stance, the Ankle Joint Dorsiflexion-test, and the extension MTP1-test in a healthy population. The aim of this clinimetric study was to determine the reproducibility of these three orthopaedic tests in runners, using minimal equipment in order to make them applicable in large cohort studies. Furthermore, we aimed to determine possible sex differences of these tests. Methods The three orthopaedic tests were administered by two sports physiotherapists in a group of 42 (22 male and 20 female) recreational runners. The intra-class correlation (ICC) for interrater and intrarater reliability and the standard error of measurement (SEM) were calculated. Bland and Altman plots were used to determine the 95% limits of agreements (LOAs). Furthermore, the difference between female and male runners was determined. Results The ICC’s of the NDT were in the range of 0.37 to 0.45, with a SEM in the range of 2.5 to 5 mm. The AJD-test had an ICC of 0.88 and 0.86 (SEM 2.4° and 8.7°), with a 95% LOA of -6.0° to 6.3° and -5.3° to 7.9°, and the MTP1-test had an ICC of 0.42 and 0.62 (SEM 34.4° and 9.9°), with a 95% LOA of -30.9° to 20.7° and -20° to 17.8° for the interrater and intrarater reproducibility, respectively. Females had a significantly (p < 0.05) lower navicular drop score and higher range of motion in extension of the MTP1, but no sex differences were found for ankle dorsiflexion (p ≥ 0.05). Conclusion The reproducibility for the AJD test in runners is good, whereas that of the NDT and extension MTP1 was moderate or low. We found a difference in NDT and MTP1 mobility between female and male runners, however this needs to be established in a larger study with more reliable test procedures. PMID:24886037

Laboratory Computing Resource Center

Science.gov Websites

Systems Computing and Data Resources Purchasing Resources Future Plans For Users Getting Started Using LCRC Software Best Practices and Policies Getting Help Support Laboratory Computing Resource Center Laboratory Computing Resource Center Latest Announcements See All April 27, 2018, Announcements, John Low

Simple Educational Tool for Digital Speckle Shearography

ERIC Educational Resources Information Center

Spagnolo, Giuseppe Schirripa; Martocchia, Andrea; Papalillo, Donato; Cozzella, Lorenzo

2012-01-01

In this study, an educational tool has been prepared for obtaining short-term and more economic training on digital speckle shearography (DSS). Shearography non-destructive testing (NDT) has gained wide acceptance over the last decade, providing a number of important and exciting inspection solutions in aerospace, electronics and medical device…

34 CFR 464.30 - With whom must a State contract to establish a State literacy resource center?

Code of Federal Regulations, 2010 CFR

2010-07-01

... literacy resource center? 464.30 Section 464.30 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE LITERACY... establish a State literacy resource center? (a) To establish a new State literacy resource center, the...

75 FR 48365 - Solicitation for a Cooperative Agreement-NIC Cost Containment Online Resource Center Project

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-10

...--NIC Cost Containment Online Resource Center Project AGENCY: National Institute of Corrections, U.S... containment online resource center. The NIC Cost Containment Online Resource Center (CCORC) will be housed on... project's four tasks are to (1) compile a guide providing a detailed review of existing evidence-based...

Neuromas

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

Foot Surgery

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

Athlete's Foot

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

Heel Pain

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

Sweaty Feet (Hyperhidrosis)

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

Corns and Calluses

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

Diabetic Wound Care

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

Toenail Fungus (Onychomycosis)

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

Sprains, Strains and Fractures

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

Arthritis and the Feet

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

Skin Cancers of the Feet

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

NASA Space Engineering Research Center for utilization of local planetary resources

NASA Technical Reports Server (NTRS)

Ramohalli, Kumar; Lewis, John S.

1990-01-01

The University of Arizona and NASA have joined to form the UA/NASA Space Engineering Research Center. The purpose of the Center is to discover, characterize, extract, process, and fabricate useful products from the extraterrestrial resources available in the inner solar system (the moon, Mars, and nearby asteroids). Individual progress reports covering the center's research projects are presented and emphasis is placed on the following topics: propellant production, oxygen production, ilmenite, lunar resources, asteroid resources, Mars resources, space-based materials processing, extraterrestrial construction materials processing, resource discovery and characterization, mission planning, and resource utilization.

Prescription Custom Orthotics and Shoe Inserts

MedlinePlus

... and Reimbursement Basics APMA Career Center Your APMA Leadership Opportunities Early Career Resources Academic and Scientific Resources Practice Management & Reimbursement Coding Resources Coding Resource Center Reimbursement Resources ...

Language Resource Centers Program

ERIC Educational Resources Information Center

Office of Postsecondary Education, US Department of Education, 2012

2012-01-01

The Language Resource Centers (LRC) program provides grants to institutions of higher education to establish, strengthen, and operate resource centers that serve to improve the nation's capacity to teach and learn foreign languages. Eligible applicants are institutions of higher education. Duration of the grant is four years. Center activities…

Non-destructive testing (NDT) of a segmental concrete bridge scheduled for demolition, with a focus on condition assessment and corrosion detection of internal tendons : [summary].

DOT National Transportation Integrated Search

2017-06-01

In this project, Florida International University researchers used segments from a demolished concrete segmental bridge with internal tendons to study damage to post-stressed tendons and to test the effectiveness of various methods of non-destructive...

Nondestructive Evaluation of Adhesive Bond Quality: State of the Art Review

DTIC Science & Technology

1989-06-01

conducted using a and Harnik (6) developed a quantitative medium-focused, 1/4-inch diameter, 10-MHz method of testing adhesive bonded joints transducer...Couchman." Spectral Analysis Tech- E. Harnik . "The Testing of Adhesive- nique of Ultrasonic NDT of Advanced Bonded Joints by a Very High Resolu

Detailed Concepts in Performing Oversight on an Army Radiographic Inspection Site

DTIC Science & Technology

2017-03-01

number of facilities that perform various nondestructive tests , inspections, and evaluations. The U.S. Army Armament Research, Development and...procedures, and documentation in place to conform to nationally recognized standards. This report specifically reviews the radiographic testing ...X-ray Nondestructive testing (NDT) Radiographic testing (RT) Computed tomography (CT) 16. SECURITY

Debating Historical Propositions: Toward a Unique Genre of NEDA Debate.

ERIC Educational Resources Information Center

Scott, David K.

The best way to develop a unique identity for the National Education Debate Association (NEDA) is to debate propositions distinct from National Debate Tournament (NDT) and the Cross Examination Debate Association (CEDA). A neglected area of debate includes propositions temporally framed in the past. Yet, the present propositional categories of…

Non-destructive testing (NDT) of a segmental concrete bridge scheduled for demolition, with a focus on condition assessment and corrosion detection of internal tendons.

DOT National Transportation Integrated Search

2017-05-01

The service life and durability of prestressed concrete in bridges are vulnerable to corrosion damages due to many factors such as construction, material, and environment. To ensure public safety, it is important to inspect these structures and to de...

Nondestructive Evaluation of Concrete Bridge Decks with Automated Acoustic Scanning System and Ground Penetrating Radar.

PubMed

Sun, Hongbin; Pashoutani, Sepehr; Zhu, Jinying

2018-06-16

Delamanintions and reinforcement corrosion are two common problems in concrete bridge decks. No single nondestructive testing method (NDT) is able to provide comprehensive characterization of these defects. In this work, two NDT methods, acoustic scanning and Ground Penetrating Radar (GPR), were used to image a straight concrete bridge deck and a curved intersection ramp bridge. An acoustic scanning system has been developed for rapid delamination mapping. The system consists of metal-ball excitation sources, air-coupled sensors, and a GPS positioning system. The acoustic scanning results are presented as a two-dimensional image that is based on the energy map in the frequency range of 0.5⁻5 kHz. The GPR scanning results are expressed as the GPR signal attenuation map to characterize concrete deterioration and reinforcement corrosion. Signal processing algorithms for both methods are discussed. Delamination maps from the acoustic scanning are compared with deterioration maps from the GPR scanning on both bridges. The results demonstrate that combining the acoustic and GPR scanning results will provide a complementary and comprehensive evaluation of concrete bridge decks.

Analysis of cracked RC beams under vibration

NASA Astrophysics Data System (ADS)

Capozucca, R.; Magagnini, E.

2017-05-01

Among the methods of monitoring of integrity, vibration analysis is more convenient as non-destructive testing (NDT) method. Many aspects regarding the vibration monitoring of the structural integrity of damaged RC elements have not been completely analysed in literature. The correlation between the development of the crack pattern on concrete surface under bending loadings, as well as the width and depth of cracks, and the variation of dynamic parameters on a structural element is an important aspects that has to be more investigated. This paper deals with cracked RC beams controlled by NDT based on natural vibration, which may be correlated to damage degree due to cracking of concrete under severe state of loading. An experimental investigation on the assessment of RC beams in different scale under loading has been done through dynamic tests in different constraint conditions of edges measuring frequency values and frequency variation. Envelope of Frequency Response Functions (FRFs) are shown and the changes of natural frequency values are related to the damage degree of RC beams subjected to static tests. Finally, a comparison between data obtained by finite element analysis and experimental results is shown.

Simulation of the spatial frequency-dependent sensitivities of Acoustic Emission sensors

NASA Astrophysics Data System (ADS)

Boulay, N.; Lhémery, A.; Zhang, F.

2018-05-01

Typical configurations of nondestructive testing by Acoustic Emission (NDT/AE) make use of multiple sensors positioned on the tested structure for detecting evolving flaws and possibly locating them by triangulation. Sensors positions must be optimized for ensuring global coverage sensitivity to AE events and minimizing their number. A simulator of NDT/AE is under development to provide help with designing testing configurations and with interpreting measurements. A global model performs sub-models simulating the various phenomena taking place at different spatial and temporal scales (crack growth, AE source and radiation, wave propagation in the structure, reception by sensors). In this context, accurate modelling of sensors behaviour must be developed. These sensors generally consist of a cylindrical piezoelectric element of radius approximately equal to its thickness, without damping and bonded to its case. Sensors themselves are bonded to the structure being tested. Here, a multiphysics finite element simulation tool is used to study the complex behaviour of AE sensor. The simulated behaviour is shown to accurately reproduce the high-amplitude measured contributions used in the AE practice.

Applications of infrared thermography for nondestructive testing of fatigue cracks in steel bridges

NASA Astrophysics Data System (ADS)

Sakagami, Takahide; Izumi, Yui; Kobayashi, Yoshihiro; Mizokami, Yoshiaki; Kawabata, Sunao

2014-05-01

In recent years, fatigue crack propagations in aged steel bridge which may lead to catastrophic structural failures have become a serious problem. For large-scale steel structures such as orthotropic steel decks in highway bridges, nondestructive inspection of deteriorations and fatigue damages are indispensable for securing their safety and for estimating their remaining strength. As conventional NDT techniques for steel bridges, visual testing, magnetic particle testing and ultrasonic testing have been commonly employed. However, these techniques are time- and labor- consuming techniques, because special equipment is required for inspection, such as scaffolding or a truck mount aerial work platform. In this paper, a new thermography NDT technique, which is based on temperature gap appeared on the surface of structural members due to thermal insulation effect of the crack, is developed for detection of fatigue cracks. The practicability of the developed technique is demonstrated by the field experiments for highway steel bridges in service. Detectable crack size and factors such as measurement time, season or spatial resolution which influence crack detectability are investigated.

Application of Linear Array Imaging Techniques to the Real-Time Inspection of Airframe Structures and Substructures

NASA Technical Reports Server (NTRS)

Miller, James G. (Principal Investigator)

1996-01-01

Current concern for ensuring, the air-worthiness of the aging commercial air fleet has prompted the establishment of broad-agency programs to develop NDT technologies that address specific aging-aircraft issues. One of the crucial technological needs that has been identified is the development of rapid, quantitative systems for depot-level inspection of bonded aluminum lap joints on aircraft. Research results for characterization of disbond and corrosion based on normal-incidence pulse-echo measurement geometries are showing promise, but are limited by the single-site nature of the measurement which requires manual or mechanical scanning to inspect an area. One approach to developing efficient systems may be to transfer specific aspects of current medical imaging technology to the NDT arena. Ultrasonic medical imaging, systems offer many desirable attributes for large scale inspection. They are portable, provide real-time imaging, and have integrated video tape recorder and printer capabilities available for documentation and post-inspection review. Furthermore, these systems are available at a relatively low cost (approximately $50,000 to $200,000) and can be optimized for use with metals with straight-forward modifications.

Non-Destructive Assessment of Residual Strength of Thermally Damaged Concrete Made with Different Aggregate Types

NASA Astrophysics Data System (ADS)

Mróz, Katarzyna; Hager, Izabela

2017-10-01

The paper presents the results obtained for four concretes made with four different aggregate types: basalt, granite, dolomite and riverbed gravel. In this study, the cement paste and mortar compositions and their volumes remained the same for all the four concretes that allow clear comparisons and conclusions of aggregate type effect. Moreover, the aggregate particle size distribution is chosen to be quasi identical for all concretes so that this factor does not affect the concrete behaviour. The residual material properties (after heating and cooling down) are determined with the use of destructive and non-destructive testing methods for each concrete type being not thermally damaged and after thermal exposure at temperature of 200 °C. 400 °C, 600 °C, 800 °C and 1000 °C. Residual mechanical properties are compared with diagnostic parameters obtained with NDT methods. The aim of this study is to provide and compare the regression curves between selected non-destructive diagnostic parameters and the residual values of mechanical properties. The NDT methods used in this experiment are: surface hardness and Ultrasonic Pulse Velocity.

Finite Element Analysis of Quantitative Percussion Diagnostics for Evaluating the Strength of Bonds Between Composite Laminates

NASA Astrophysics Data System (ADS)

Poveromo, Scott; Malcolm, Doug; Earthman, James

Conventional nondestructive (NDT) techniques used to detect defects in composites are not able to determine intact bond integrity within a composite structure and are costly to use on large and complex shaped surfaces. To overcome current NDT limitations, a new technology was adopted based on quantitative percussion diagnostics (QPD) to better quantify bond quality in fiber reinforced composite materials. Results indicate that this technology is capable of detecting weak (`kiss') bonds between flat composite laminates. Specifically, the local value of the probe force determined from quantitative percussion testing was predicted to be significantly lower for a laminate that contained a `kiss' bond compared to that for a well-bonded sample, which is in agreement with experimental findings. Experimental results were compared to a finite element analysis (FEA) using MSC PATRAN/NASTRAN to understand the visco-elastic behavior of the laminates during percussion testing. The dynamic FEA models were used to directly predict changes in the probe force, as well as effective stress distributions across the bonded panels as a function of time.

75 FR 57972 - National Center for Research Resources; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-23

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special..., Scientific Review Officer, Office of Review, National Center for Research Resources, Bethesda, MD 20892, 301...

75 FR 32187 - National Center for Research Resources; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-07

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special..., National Center for Research Resources, or National Institutes of Health, 6701 Democracy Boulevard, 1...

COST Action TU1208 - Working Group 4 - Combined use of GPR and other NDT methods & GPR applications in geosciences

NASA Astrophysics Data System (ADS)

Pajewski, Lara; Solla, Mercedes; Fontul, Simona

2017-04-01

This work aims at presenting the main results achieved by Working Group (WG) 4 "Different applications of GPR and other NDT technologies in civil engineering" of the COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar" (www.GPRadar.eu, www.cost.eu). The main objective of the Action TU1208, started in April 2013 and ending in October 2017, is to exchange and increase scientific-technical knowledge and experience of Ground Penetrating Radar (GPR) techniques in civil engineering, whilst promoting in Europe the effective use of this safe non-destructive technique. The Action involves more than 150 Institutions from 28 COST Countries, a Cooperating State, 6 Near Neighbour Countries and 6 International Partner Countries. WG4 deals with the use of GPR outside from the civil engineering area, namely in archaeological prospecting and cultural heritage diagnostics, agriculture and management of water resources, investigation of polluted industrial sites, non-destructive testing of living tree trunks, planetary exploration, demining, localization of people buried under avalanches and debris, and more. Furthermore, this WG studies the integration of GPR with other Non-Destructive Testing (NDT) methods. The most relevant achievements stemming from WG4 will be presented during the 2017 EGU GA. These are: (i) The collection of thorough information on the state-of-the-art, ongoing studies, problems and future research needs on the topics of interest for this WG; (ii) The performance of a plethora of interesting case studies in important sites all over Europe, including well-known historical places such as Stonehenge (United Kingdom), Carnuntum (Austria), the Wawel Cathedral (Cracow, Poland), the Tholos Tomb of Acharnon (Athens, Greece), the Łazienki Royal Palace (Warsaw, Poland), and more; (iii) WG4 contributed to the TU1208 Education Pack, an open educational package conceived to teach GPR in University courses. Additionally, WG4 was very active in offering training activities. In cooperation with the other WGs, the following courses were successfully organised: Training School (TS) "Civil engineering applications of Ground Penetrating Radar" (Pisa, Italy, September 2014), TS "Applications of Ground Penetrating Radar in urban areas: the sensitive case of historical cities" (Cracow, Poland, May 2015), TS "Applications of GPR to civil engineering and archaeology" (Valletta, Malta, January 2016), and TS "Non-destructive testing techniques for civil engineering" (Barcelona, Spain, March 2016). Finally, WG4 contributed to the organization of a series of national events devoted to fostering the interaction of Action Members with stakeholders, new potential GPR end-users, and interested citizens. During such events, participants could discover what is Ground Penetrating Radar (GPR) and how this technique can be effectively used in civil engineering works as well as in different fields ("TU1208 GPR Road Show"). Acknowledgement: The Authors are deeply grateful to COST (European Cooperation in Science and Technology, www.cost.eu), for funding and supporting the COST Action TU1208 "Civil engineering applications of Ground Penetrating Radar" (www.GPRadar.eu).

Resources within "Reason"

ERIC Educational Resources Information Center

Catlett, Camille

2010-01-01

Federally funded national centers offer high-quality products and resources for use by teachers, family members, and others. By design, they offer resources that are low cost or no cost. This article presents details about several centers that may have resources to support your work. They include: (1) Center for Early Literacy Learning (CELL); (2)…

Fast method for simultaneous quantification of tamoxifen and metabolites in dried blood spots using an entry level LC-MS/MS system.

PubMed

Tré-Hardy, Marie; Capron, Arnaud; Antunes, Marina Venzon; Linden, Rafael; Wallemacq, Pierre

2016-11-01

The purpose of this study was to develop and validate a new liquid chromatography-tandem mass spectrometric (LC-MSMS) assay for the simultaneous quantification of tamoxifen (TAM) and its main therapeutically active metabolites, N-desmethyltamoxifen (NDT), 4-hydroxytamoxifen (4HT) and endoxifen (END) in dried blood spots. Ultrasound assisted methanolic extraction was used for TAM and metabolites extraction from dried blood spot. After evaporation and methanol reconstitution, the extract was injected into a LC-MSMS system. Reversed phase chromatography was performed on a C18 grafted column in gradient mode. TAM, metabolites, and internal standard (diazepam-d 5 ; IS) were identified in positive electrospray ionization mode using m/z transition of 372.5>72.1 (TAM); 374.23>58.10 (END); 358.27>58.10 (NDT); 388.23>44.80 (4HT) and 290.00>198.00 (IS). Total analytical run time was 6.5min. Assay was linear from 1 to 500ng/mL for all substances and presented intra and inter-assay precision and accuracy <15%. TAM, NDT, 4HT and END limits of quantification and detection were of 1 and 0.5ng/mL; 1 and 3ng/mL; 1.7 and 3ng/mL; 0.6 and 2ng/mL, respectively. Recovery ranged from 83.8 to 96.3% with matrix effect ranged from 4.3 to 29.8% for TAM and its metabolites. Hematocrit value ≤40% appeared to negatively influence accuracy of the method. In conclusion, the method described here is somewhat accessible, relatively fast, sensitive and selective with no interference. This assay might be used to investigate the level of TAM and its metabolites in DBS for therapeutic drug monitoring purposes. Copyright © 2016 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

The Bobath (NDT) concept in adult neurological rehabilitation: what is the state of the knowledge? A scoping review. Part I: conceptual perspectives.

PubMed

Vaughan-Graham, Julie; Cott, Cheryl; Wright, F Virginia

2015-01-01

The study's purpose was to describe the range of knowledge pertaining to the Bobath concept/NDT in adult neurological rehabilitation, synthesize the findings, identify knowledge gaps and develop empirically based recommendations for future research. This article explores the conceptual literature. A scoping review of research and non-research articles published from 2007 to 2012. Two independent reviewers selected studies based on a systematic procedure. Inclusion criteria for studies were: electronically accessible English language literature with Bobath and/or neurodevelopmental therapy (NDT) as the subject heading in the title/keyword/abstract/intervention comparison with respect to adult neurological conditions. Data were abstracted and summarized with respect to study purpose, defining and operationalizing the Bobath concept, therapist demographics, recruitment, discussion and conclusions. Of the 33 publications identified, 14 publications sought to define the theoretical foundations and identify key aspects of clinical practice of the contemporary Bobath concept. The publications comprised three theoretical papers, four surveys, a Delphi reported through two papers, one qualitative study, three letters to the editor and one editorial. Knowledge derived from review of the conceptual literature provides clinicians with an updated Bobath clinical framework as well as identifying aspects of Bobath clinical practice that require careful consideration in future effectiveness studies. Implications for Rehabilitation The integration of posture and movement with respect to the quality of task performance remains a cornerstone of the redefined Bobath concept. A key fundamental principle of the clinical application of the Bobath concept since its inception is the selective manipulation of sensory information, namely, facilitation, to positively affect motor control and perception in persons post-central nervous system lesion. This is an aspect of Bobath clinical practice that requires further investigation. Study and treatment fidelity issues such as therapist expertise, the use of treatment logs to document individualized clinical practice, as well as therapist supervision and evaluation require careful consideration in the implementation of Bobath effectiveness studies such that causality can be determined.

NREL: Renewable Resource Data Center - Biomass Resource Data

Science.gov Websites

Resource Data The following biomass resource data collections can be found in the Renewable Resource Data Center (RReDC). Current Biomass Resource Supply An estimate of biomass resources currently available by county. Projected Biomass Resource Supply An estimate of biomass resources potentially

Basic Skills Resource Center: Documentation and Phaseover Report for the Military Educators Resource NETWORK

DTIC Science & Technology

1985-01-01

narrative form. 111. Describe the subject of your request in 3 or 4 precise terms (e.g., reading skills , computer assisted instruction, adult literacy ...00 Research Product 85-03 L’C £ BASIC SKILLS RESOURCE CENTER: DOCUMENTATION AND PHASEOVER REPORT FOR THE MILITARY EDUCATORS RESOURCE NETWORK... SKILLS RESOURCE CENTER: DOCUMENTATION AND Interim Report PHLASEOVER REPORT FOR THE MILITARY EDUCATORS Feb 1982 - Sept 1984 RESOURCE NETWORK 6

Bulk solitary waves in elastic solids

NASA Astrophysics Data System (ADS)

Samsonov, A. M.; Dreiden, G. V.; Semenova, I. V.; Shvartz, A. G.

2015-10-01

A short and object oriented conspectus of bulk solitary wave theory, numerical simulations and real experiments in condensed matter is given. Upon a brief description of the soliton history and development we focus on bulk solitary waves of strain, also known as waves of density and, sometimes, as elastic and/or acoustic solitons. We consider the problem of nonlinear bulk wave generation and detection in basic structural elements, rods, plates and shells, that are exhaustively studied and widely used in physics and engineering. However, it is mostly valid for linear elasticity, whereas dynamic nonlinear theory of these elements is still far from being completed. In order to show how the nonlinear waves can be used in various applications, we studied the solitary elastic wave propagation along lengthy wave guides, and remarkably small attenuation of elastic solitons was proven in physical experiments. Both theory and generation for strain soliton in a shell, however, remained unsolved problems until recently, and we consider in more details the nonlinear bulk wave propagation in a shell. We studied an axially symmetric deformation of an infinite nonlinearly elastic cylindrical shell without torsion. The problem for bulk longitudinal waves is shown to be reducible to the one equation, if a relation between transversal displacement and the longitudinal strain is found. It is found that both the 1+1D and even the 1+2D problems for long travelling waves in nonlinear solids can be reduced to the Weierstrass equation for elliptic functions, which provide the solitary wave solutions as appropriate limits. We show that the accuracy in the boundary conditions on free lateral surfaces is of crucial importance for solution, derive the only equation for longitudinal nonlinear strain wave and show, that the equation has, amongst others, a bidirectional solitary wave solution, which lead us to successful physical experiments. We observed first the compression solitary wave in the duct-like polymer shell and proved, that there is no tensile area behind the wave, the bulk soliton propagates on a distance many times longer than its wave length, while both its shape and amplitude remain unchanged. We demonstrated recently how the strain solitons can be used for non-destructive testing (NDT) of laminated composites, used nowadays for various applications, e.g., in microelectronics, aerospace and automotive industries, and bulk strain solitons are among prospective instruments for NDT. Being aimed to propose the bulk strain solitons as an instrument for NDT in solids, we studied numerically the evolution of them in various wave guides with local defects, and shown that the strain soliton undergoes changes in amplitude, phase shift and the shape, that are distinctive and can be estimated. To sum up, now we are able to propose a new NDT technique, based on bulk strain soliton propagation in structural elements.

NREL: Renewable Resource Data Center - Biomass Resource Models and Tools

Science.gov Websites

Models and Tools The Renewable Resource Data Center (RReDC) features the following biomass models Models & Tools Publications Related Links Geothermal Resource Information Solar Resource Information

34 CFR 464.1 - What is the State Literacy Resource Centers Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... purpose of sharing information, data, research, and expertise and literacy resources. (Authority: 20 U.S.C... 34 Education 3 2010-07-01 2010-07-01 false What is the State Literacy Resource Centers Program...) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE LITERACY RESOURCE CENTERS PROGRAM...

30 CFR 1206.113 - How will ONRR identify market centers?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false How will ONRR identify market centers? 1206.113 Section 1206.113 Mineral Resources OFFICE OF NATURAL RESOURCES REVENUE, DEPARTMENT OF THE INTERIOR NATURAL RESOURCES REVENUE PRODUCT VALUATION Federal Oil § 1206.113 How will ONRR identify market centers? ONRR...

30 CFR 1206.113 - How will ONRR identify market centers?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false How will ONRR identify market centers? 1206.113 Section 1206.113 Mineral Resources OFFICE OF NATURAL RESOURCES REVENUE, DEPARTMENT OF THE INTERIOR NATURAL RESOURCES REVENUE PRODUCT VALUATION Federal Oil § 1206.113 How will ONRR identify market centers? ONRR...

30 CFR 1206.113 - How will ONRR identify market centers?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false How will ONRR identify market centers? 1206.113 Section 1206.113 Mineral Resources OFFICE OF NATURAL RESOURCES REVENUE, DEPARTMENT OF THE INTERIOR NATURAL RESOURCES REVENUE PRODUCT VALUATION Federal Oil § 1206.113 How will ONRR identify market centers? ONRR...

34 CFR 464.32 - How is a regional literacy resource center established and operated?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false How is a regional literacy resource center established... Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE LITERACY RESOURCE CENTERS PROGRAM How Does a State Award Contracts? § 464.32 How is a regional literacy resource...

34 CFR 464.1 - What is the State Literacy Resource Centers Program?

Code of Federal Regulations, 2011 CFR

2011-07-01

... purpose of sharing information, data, research, and expertise and literacy resources. (Authority: 20 U.S.C... 34 Education 3 2011-07-01 2011-07-01 false What is the State Literacy Resource Centers Program...) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE LITERACY RESOURCE CENTERS PROGRAM...

34 CFR 464.1 - What is the State Literacy Resource Centers Program?

Code of Federal Regulations, 2012 CFR

2012-07-01

... purpose of sharing information, data, research, and expertise and literacy resources. (Authority: 20 U.S.C... 34 Education 3 2012-07-01 2012-07-01 false What is the State Literacy Resource Centers Program...) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE LITERACY RESOURCE CENTERS PROGRAM...

34 CFR 464.1 - What is the State Literacy Resource Centers Program?

Code of Federal Regulations, 2013 CFR

2013-07-01

... purpose of sharing information, data, research, and expertise and literacy resources. (Authority: 20 U.S.C... 34 Education 3 2013-07-01 2013-07-01 false What is the State Literacy Resource Centers Program...) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE LITERACY RESOURCE CENTERS PROGRAM...

34 CFR 464.1 - What is the State Literacy Resource Centers Program?

Code of Federal Regulations, 2014 CFR

2014-07-01

... purpose of sharing information, data, research, and expertise and literacy resources. (Authority: 20 U.S.C... 34 Education 3 2014-07-01 2014-07-01 false What is the State Literacy Resource Centers Program...) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE LITERACY RESOURCE CENTERS PROGRAM...

Virtual Resources Centers and Their Role in Small Rural Schools.

ERIC Educational Resources Information Center

Freitas, Candido Varela de; Silva, Antonio Pedro da

Virtual resources centers have been considered a pedagogical tool since the increasing development of electronic means allowed for the storage of huge amounts of information and its easy retrieval. Bearing in mind the need for enhancing the appearance of those centers, a discipline of "Management of Resources Centers" was included in a…

Community Involvement: A Case Study of the Education Resource Center.

ERIC Educational Resources Information Center

Wilson, Stephen; And Others

The Education Resource Center (ERC) is a community-based teachers' resource center located in Chicago (Illinois). Its conceptual base is broader than that of a typical teachers center as ERC represents a community-based social movement with a wider orientation than teacher training. ERC's policy board reflects community organizations and the…

Survey of Staff Perceptions of the AEL Resource Center.

ERIC Educational Resources Information Center

Cowley, Kimberly S.

The Resource Center at the Appalachia Educational Laboratory (AEL), Inc., provides direct services to clients both within and outside AEL, as well as serving as a repository and distribution center for educational materials. Three main objectives were identified: to discover the extent to which staff use current components of the Resource Center;…

Asian Network of Research Resource Centers.

PubMed

Lee, Sunhee; Nam, Seungjoo; Jung, Paul E; Kim, Ki-Jeong; Lee, Yeonhee

2016-10-01

With the enactment of the Nagoya Protocol, biological resources are now increasingly considered as assets of an individual country, instead of as the common property of mankind. As worldwide interest for securing biological resources intensifies, research resource centers (RRCs), which collect, preserve, and provide resources and their information to academia and industries, are gathering more attention. The Asian Network of Research Resource Centers (ANRRC) strives for conservation and effective use of bioresources and their data by connecting resource centers of Asia, a continent with the greatest diversity of life. Since its foundation in 2009, the Network has significantly expanded to encompass 103 RRCs of 14 countries. Through the Network, member countries discuss opportunities for resource exchange and research collaboration and share biobanking information and regulations of different countries for international harmonization of resource management. ANRRC also contributes to developing of International Standards of biobanks and biological resources as a liaison to the International Organization for Standardization technical committee 276 Biotechnology.

Digital enhancement of X-rays for NDT

NASA Technical Reports Server (NTRS)

Butterfield, R. L.

1980-01-01

Report is "cookbook" for digital processing of industrial X-rays. Computer techniques, previously used primarily in laboratory and developmental research, have been outlined and codified into step by step procedures for enhancing X-ray images. Those involved in nondestructive testing should find report valuable asset, particularly is visual inspection is method currently used to process X-ray images.

Comparative testing of radiographic testing, ultrasonic testing and phased array advanced ultrasonic testing non destructive testing techniques in accordance with the AWS D1.5 bridge welding code.

DOT National Transportation Integrated Search

2014-02-01

A comprehensive body of non-destructive testing data was collected from steel bridge welds under real-world conditions in a fabricators shop. Three different non-destructive testing (NDT) techniques were used on each weld inspection, these being R...

76 FR 3561 - Airworthiness Directives; The Boeing Company Model 777-200 and -300 Series Airplanes Equipped...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

... proposed AD, contact Boeing Commercial Airplanes, Attention: Data & Services Management, P.O. Box 3707, MC... is cracked, has gaps, is loose, or is missing; repetitive general visual inspections of click bond... sealant Doing an NDT and general visual inspection for thermal degradation of the exposed T/R inner wall...

77 FR 52067 - In the Matter of Quality Inspection and Testing, Inc., New Iberia, LA; General License Pursuant...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... June 27, 2012, the NRC and QIT representatives met in an ADR session with a professional mediator... of QIT must submit a paper for presentation at an NDT professional society meeting (national or local... professional society meeting (national or local chapter), such as the Non-Destructive Testing Management...

Evaluation of Alternative Life Assessment Approaches Using P-3 SLAP Test Results

DTIC Science & Technology

2010-06-01

modelling of fatigue crack growth, infrared NDT technologies and fibre optic corrosion detection devices. He joined DSTO in 2007 in the Air Vehicles...10 3.4 Spectra Properties ...the previously conducted (truly ‘blind’) predictions for RAAF usage . DSTO-TR-2418 4 2. Background to DSTO P-3 SLAP Test Interpretation The P

Virginia Water Resources Research Center - at Virginia Tech since 1965

Science.gov Websites

Virginia Water Resources Research Center at Virginia Tech since 1965 Search for: Search Skip to collaborative research, extension, and education programs to develop solutions to water resource challenges. We Monitoring Council Conference: March 21, 2018 The Virginia Water Resources Research Center at Virginia Tech

Water resources scientific information center

USGS Publications Warehouse

Cardin, C. William; Campbell, J.T.

1986-01-01

The Water Resources Scientific Information Center (WRSIC) acquires, abstracts and indexes the major water resources related literature of the world, and makes information available to the water resources community and the public. A component of the Water Resources Division of the US Geological Survey, the Center maintains a searchable computerized bibliographic data base, and publishers a monthly journal of abstracts. Through its services, the Center is able to provide reliable scientific and technical information about the most recent water resources developments, as well as long-term trends and changes. WRSIC was established in 1966 by the Secretary of the Interior to further the objectives of the Water Resources Research Act of 1964--legislation that encouraged research in water resources and the prevention of needless duplication of research efforts. It was determined the WRSIC should be the national center for information on water resources, covering research reports, scientific journals, and other water resources literature of the world. WRSIC would evaluate all water resources literature, catalog selected articles, and make the information available in publications or by computer access. In this way WRSIC would increase the availability and awareness of water related scientific and technical information. (Lantz-PTT)

NREL: Renewable Resource Data Center - Geothermal Resource Data

Science.gov Websites

sites Data related to geothermal technology and energy Resource Data The following geothermal resource data collections can be found in the Renewable Resource Data Center (RReDC). Geothermal Resource Data The datasets on this page offer a qualitative

NREL: Renewable Resource Data Center - Solar Resource Data

Science.gov Websites

Solar Resource Data The following solar resource data collections can be found in the Renewable Resource Data Center (RReDC). Cooperative Networks for Renewable Resource Measurements (CONFRRM) Solar Energy Resource Data Provides solar radiation and wind measurement data for select U.S. locations

Performance evaluation of data center service localization based on virtual resource migration in software defined elastic optical network.

PubMed

Yang, Hui; Zhang, Jie; Ji, Yuefeng; Tan, Yuanlong; Lin, Yi; Han, Jianrui; Lee, Young

2015-09-07

Data center interconnection with elastic optical network is a promising scenario to meet the high burstiness and high-bandwidth requirements of data center services. In our previous work, we implemented cross stratum optimization of optical network and application stratums resources that allows to accommodate data center services. In view of this, this study extends the data center resources to user side to enhance the end-to-end quality of service. We propose a novel data center service localization (DCSL) architecture based on virtual resource migration in software defined elastic data center optical network. A migration evaluation scheme (MES) is introduced for DCSL based on the proposed architecture. The DCSL can enhance the responsiveness to the dynamic end-to-end data center demands, and effectively reduce the blocking probability to globally optimize optical network and application resources. The overall feasibility and efficiency of the proposed architecture are experimentally verified on the control plane of our OpenFlow-based enhanced SDN testbed. The performance of MES scheme under heavy traffic load scenario is also quantitatively evaluated based on DCSL architecture in terms of path blocking probability, provisioning latency and resource utilization, compared with other provisioning scheme.

Performance evaluation of multi-stratum resources integration based on network function virtualization in software defined elastic data center optical interconnect.

PubMed

Yang, Hui; Zhang, Jie; Ji, Yuefeng; Tian, Rui; Han, Jianrui; Lee, Young

2015-11-30

Data center interconnect with elastic optical network is a promising scenario to meet the high burstiness and high-bandwidth requirements of data center services. In our previous work, we implemented multi-stratum resilience between IP and elastic optical networks that allows to accommodate data center services. In view of this, this study extends to consider the resource integration by breaking the limit of network device, which can enhance the resource utilization. We propose a novel multi-stratum resources integration (MSRI) architecture based on network function virtualization in software defined elastic data center optical interconnect. A resource integrated mapping (RIM) scheme for MSRI is introduced in the proposed architecture. The MSRI can accommodate the data center services with resources integration when the single function or resource is relatively scarce to provision the services, and enhance globally integrated optimization of optical network and application resources. The overall feasibility and efficiency of the proposed architecture are experimentally verified on the control plane of OpenFlow-based enhanced software defined networking (eSDN) testbed. The performance of RIM scheme under heavy traffic load scenario is also quantitatively evaluated based on MSRI architecture in terms of path blocking probability, provisioning latency and resource utilization, compared with other provisioning schemes.

NREL: Renewable Resource Data Center - Solar Resource Information

Science.gov Websites

Solar Resource Information The Renewable Resource Data Center (RReDC) offers a collection of data and tools to assist with solar resource research. Learn more about RReDC's solar resource: Data Models siting. In addition, RReDC offers a solar resource glossary, unit conversion information, and an

NREL: Renewable Resource Data Center - Biomass Resource Information

Science.gov Websites

Biomass Resource Information Photo of corn stover biomass resource Corn stover The Renewable Resource Data Center (RReDC) offers a collection of data and tools to assist with biomass resource research . Learn more about RReDC's biomass resource: Data Models and tools Publications Related links Biomass

Opportunity for Collaboration Between Radiation Injury Treatment Network Centers and Medical Toxicology Specialists.

PubMed

Davlantes, Elizabeth; Shartar, Samuel; Venero, Jennifer; Steck, Alaina; Langston, Amelia; Kazzi, Ziad N

2017-08-01

The Radiation Injury Treatment Network (RITN) comprises >50 centers across the United States that are poised to care for victims of a radiation emergency. The network is organized around bone marrow transplant centers because these facilities excel in both radiation medicine and the care of patients with severe bone marrow depression. A radiation emergency may cause not only irradiation from an external source but also internal contamination with radioactive material. Because medical toxicologists are trained in radiation injury management and have expertise in the management of internal contamination, RITN centers may benefit from partnerships with medical toxicology resources, which may be located at academic medical centers, hospital inpatient clinical services, outpatient clinics, or poison control centers. We determined the locations of existing RITN centers and assessed their proximity to various medical toxicology resources, including medical toxicology fellowship programs, inpatient toxicology services, outpatient toxicology clinics, and poison control centers. Data were derived from publicly available Internet sources in March 2015. The majority of RITN centers do not have a medical toxicology fellowship, an inpatient toxicology service, or an outpatient toxicology clinic within the same institution. Fifty-seven percent of RITN centers have at least one of these resources located in the same city, however, and 73% of centers have at least one of these resources or a poison control center within the same city. Ninety-five percent of RITN centers have at least one medical toxicology resource within the state. Most RITN centers are located in the same city as at least one medical toxicology resource. Establishing relationships between RITN centers and medical toxicologists needs to be explored further.

How To Develop a Resource Center for a Career Education Program.

ERIC Educational Resources Information Center

Eversole, Opal

Intended to guide local school systems in the development of a resource center for a career education program, this booklet identifies three kinds of resources which should be included: Human resources, community resources, and material resources. Then in a question/answer format, the guide explains the basic steps in identifying all resources…

Holographic Cinematography And Its Applications

NASA Astrophysics Data System (ADS)

Smigielski, Paul

1987-09-01

We describe several applications of cineholography to objects scattering light by reflection: single-exposure cineholograms on 126-mm films at a repetition rate of 25 holograms per second for 3-D movies and for flight simulators applications, double-exposure cineholograms for medical and industrial applications (NDT). Limitations of cineholography are also described. The light source used for cineholograms recording is a frequency-doubled pulse YAG-laser.

Steam generators regulatory practices and issues in Spain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendoza, C.; Castelao, C.; Ruiz-Colino, J.

1997-02-01

This paper presents the actual status of Spanish Steam Generator tubes, actions developed by PWR plant owners and submitted to CSN, and regulatory activities related to tube degradation mechanisms analysis; NDT tube inspection techniques; tube, tubesheet and TSPs integrity studies; tube plugging/repair criteria; preventive and corrective measures including whole SGs replacement; tube leak measurement methods and other operational aspects.

NDE Conference on Civil Engineering : a joint conference of the 7th Structural Materials Technology Conference (SMT) and the 6th International Symposium on Nondestructive Testing in Civil Engineering (NDT-CE)

DOT National Transportation Integrated Search

2007-01-01

The 2006 NDE conference on Civil Engineering was held in St. Louis, MO on August 14 18, 2006. The conference combined the 7th Structural Materials Technology Conference (SMT) along with the 6th International Symposium on Nondestructive Testing in...

The Right Stuff: Essential Resources for Managing Your Middle School Media Center.

ERIC Educational Resources Information Center

Manczuk, Suzanne

1999-01-01

Describes the following resources for managing a middle school media center: literature bibliographies with on-target middle school recommendations and useful annotations; resources for teaching primary sources; resources on censorship and banned books; basic Internet guides; copyright-law resources; information-literacy standards; and…

Touchstone for success

NASA Astrophysics Data System (ADS)

Longdon, Norman; Dauphin, J.; Dunn, B. D.; Judd, M. D.; Levadou, F. G.; Zwaal, A.

1992-04-01

This booklet is addressed to the users of the Materials and Processes Laboratories of the European Space Research and Technology Centre (ESTEC). The revised edition updates the July 1988 edition featuring the enhancement of existing laboratories and the establishment of a ceramics laboratory. Information on three ESTEC laboratories is presented as well as a look into the future. The three laboratories are the Environmental Effects Laboratory, the Metallic Materials Laboratory, and the Non-metallic Laboratory. The booklet reports on the effects of the space environment on radiation effects (UV and particles), outgassing and contamination, charging-up and discharges, particulate contaminants, atomic oxygen and debris/impacts. Applications of metallic materials to space hardware are covered in the areas of mechanical properties, corrosion/stress corrosion, fracture testing and interpretation, metallurgical processes and failure analysis. Particular applications of non metallic materials to space hardware that are covered are advanced and reinforced polymers, advanced ceramics, thermal properties, manned ambiance, polymer processing, non-destructive tests (NDT), and failure analysis. Future emphasis will be on the measurement of thermo-optical properties for the Infrared Space Observatory (ISO) and other infrared telescopes, support of the Columbus program, Hermes related problems such as 'warm' composites and 'hot' reinforced ceramics for thermal insulation, materials for extravehicular activity (EVA), and NDT.

Validation of mechanical models for reinforced concrete structures: Presentation of the French project ``Benchmark des Poutres de la Rance''

NASA Astrophysics Data System (ADS)

L'Hostis, V.; Brunet, C.; Poupard, O.; Petre-Lazar, I.

2006-11-01

Several ageing models are available for the prediction of the mechanical consequences of rebar corrosion. They are used for service life prediction of reinforced concrete structures. Concerning corrosion diagnosis of reinforced concrete, some Non Destructive Testing (NDT) tools have been developed, and have been in use for some years. However, these developments require validation on existing concrete structures. The French project “Benchmark des Poutres de la Rance” contributes to this aspect. It has two main objectives: (i) validation of mechanical models to estimate the influence of rebar corrosion on the load bearing capacity of a structure, (ii) qualification of the use of the NDT results to collect information on steel corrosion within reinforced-concrete structures. Ten French and European institutions from both academic research laboratories and industrial companies contributed during the years 2004 and 2005. This paper presents the project that was divided into several work packages: (i) the reinforced concrete beams were characterized from non-destructive testing tools, (ii) the mechanical behaviour of the beams was experimentally tested, (iii) complementary laboratory analysis were performed and (iv) finally numerical simulations results were compared to the experimental results obtained with the mechanical tests.

The deep layers of a Paleozoic arc: geochemistry of the Copley-Balaklala series, northern California

NASA Astrophysics Data System (ADS)

Brouxel, Marc; Lapierre, Henriette; Michard, Annie; Albarède, Francis

1987-10-01

REE, Zr, Nb concentrations and Sr, Nd isotope compositions have been measured in Copley basalts and andesites, Balaklala rhyolites, and Mule Mountain trondhjemites (northern California) which represent the deep layers of a well preserved intra-oceanic island arc of Siluro-Devonian age. 87Sr/ 86Sr is shifted towards high values (up to 0.707) whereas Ce is preferentially removed from rhyolites. A large proportion of the analyzed samples including some acidic rocks shows a pronounced depletion in light REE. The ɛ Nd(T) values of most Copley, Balaklala, and Mule Mountain rocks fall in the range +6 to +8 which suggests that they originated from a normal MORB-type source ( ɛ Nd(T) ≈ +9 ) contaminated with either sediments or an OIB-type component. In modern island arcs, only the shallow levels are accessible: comparison with the Copley-Balaklala-Mule Mountain Series suggests that, at depth, an immature island arc is likely to comprise thick layers of LILE-depleted tholeiites and rhyolites intensely altered by pervasive circulation of seawater. Least-square solutions of trace element models suggest that rhyolites and trondhjemites represent remelting of mafic volcanics from the arc basement rather than residual melts of basalt-andesite differentiation.

Impact Delamination and Fracture in Aluminum/Acrylic Sandwich Plates

NASA Technical Reports Server (NTRS)

Liaw, Benjamin; Zeichner, Glenn; Liu, Yanxiong; Bowles, Kenneth J. (Technical Monitor)

2000-01-01

Impact-induced delamination and fracture in 6061-T6 aluminum/cast acrylic sandwich plates adhered by epoxy were generated in an instrumented drop-weight impact machine. Although only a small dent was produced on the aluminum side when a hemispherical penetrator tup was dropped onto it from a couple of inches, a large ring of delamination at the interface was observed. The delamination damage was often accompanied by severe shattering in the acrylic substratum. Damage patterns in the acrylic layer include radial and ring cracks and, together with delamination at the interface, may cause peeling-off of acrylic material from the sandwich plate. Theory of stress-wave propagation can be used to explain these damage patterns. The impact tests were conducted at various temperatures. The results also show clearly that temperature effect is very important in impact damage. For pure cast acrylic nil-ductile transition (NDT) occurs between 185-195 F. Excessive impact energy was dissipated into fracture energy when tested at temperature below this range or through plastic deformation when tested at temperature above the NDT temperature. Results from this study will be used as baseline data for studying fiber-metal laminates, such as GLARE and ARALL for advanced aeronautical and astronautical applications.

Defect modelling in an interactive 3-D CAD environment

NASA Astrophysics Data System (ADS)

Reilly, D.; Potts, A.; McNab, A.; Toft, M.; Chapman, R. K.

2000-05-01

This paper describes enhancement of the NDT Workbench, as presented at QNDE '98, to include theoretical models for the ultrasonic inspection of smooth planar defects, developed by British Energy and BNFL-Magnox Generation. The Workbench is a PC-based software package for the reconstruction, visualization and analysis of 3-D ultrasonic NDT data in an interactive CAD environment. This extension of the Workbeach now provides the user with a well established modelling approach, coupled with a graphical user interface for: a) configuring the model for flaw size, shape, orientation and location; b) flexible specification of probe parameters; c) selection of scanning surface and scan pattern on the CAD component model; d) presentation of the output as a simulated ultrasound image within the component, or as graphical or tabular displays. The defect modelling facilities of the Workbench can be used for inspection procedure assessment and confirmation of data interpretation, by comparison of overlay images generated from real and simulated data. The modelling technique currently implemented is based on the Geometrical Theory of Diffraction, for simulation of strip-like, circular or elliptical crack responses in the time harmonic or time dependent cases. Eventually, the Workbench will also allow modelling using elastodynamic Kirchhoff theory.

NDT-Bobath method in normalization of muscle tone in post-stroke patients.

PubMed

Mikołajewska, Emilia

2012-01-01

Ischaemic stroke is responsible for 80-85% of strokes. There is great interest in finding effective methods of rehabilitation for post-stroke patients. The aim of this study was to assess the results of rehabilitation carried out in the normalization of upper limb muscle tonus in patients, estimated on the Ashworth Scale for Grading Spasticity. The examined group consisted of 60 patients after ischaemic stroke. 10 sessions of NDT-Bobath therapy were provided within 2 weeks (ten days of therapy). Patient examinations using the Ashworth Scale for Grading Spasticity were done twice: the first time on admission and the second after the last session of the therapy to assess rehabilitation effects. Among the patients involved in the study, the results measured on the Ashworth Scale (where possible) were as follows: recovery in 16 cases (26.67%), relapse in 1 case (1.67%), no measurable changes (or change within the same grade of the scale) in 8 cases (13.33%). Statistically significant changes were observed in the health status of the patients. These changes, in the area of muscle tone, were favorable and reflected in the outcomes of the assessment using the Ashworth Scale for Grading Spasticity.

Testing the Mojave-Sonora megashear hypothesis: Evidence from Paleoproterozoic igneous rocks and deformed Mesozoic strata in Sonora, Mexico

USGS Publications Warehouse

Amato, J.M.; Lawton, T.F.; Mauel, D.J.; Leggett, W.J.; Gonzalez-Leon, C. M.; Farmer, G.L.; Wooden, J.L.

2009-01-01

U-Pb ages and Nd isotope values of Proterozoic rocks in Sonora, Mexico, indicate the presence of Caborca-type basement, predicted to lie only south of the Mojave-Sonora mega-shear, 40 km north of the postulated megashear. Granitoids have U-Pb zircon ages of 1763-1737 Ma and 1076 Ma, with ??Nd(t) values from +1.4 to -4.3, typical of the Caborca block. Lower Jurassic strata near the Proterozoic rocks contain large granitic clasts with U-Pb ages and ??Nd(t) values indistinguishable from those of Caborcan basement. Caborca-type basement was thus present at this location north of the megashear by 190 Ma, the depositional age of the Jurassic strata. The Proterozoic rocks are interpreted as parautochthonous, exhumed and juxtaposed against the Mesozoic section by a reverse fault that formed a footwall shortcut across a Jurassic normal fault. Geochronology, isotope geochemistry, and structural geology are therefore inconsistent with Late Jurassic megashear displacement and require either that no major transcurrent structure is present in Sonora or that strike-slip displacement occurred prior to Early Jurassic time. ?? 2009 The Geological Society of America.

Light-Triggered Ternary Device and Inverter Based on Heterojunction of van der Waals Materials.

PubMed

Shim, Jaewoo; Jo, Seo-Hyeon; Kim, Minwoo; Song, Young Jae; Kim, Jeehwan; Park, Jin-Hong

2017-06-27

Multivalued logic (MVL) devices/circuits have received considerable attention because the binary logic used in current Si complementary metal-oxide-semiconductor (CMOS) technology cannot handle the predicted information throughputs and energy demands of the future. To realize MVL, the conventional transistor platform needs to be redesigned to have two or more distinctive threshold voltages (V TH s). Here, we report a finding: the photoinduced drain current in graphene/WSe 2 heterojunction transistors unusually decreases with increasing gate voltage under illumination, which we refer to as the light-induced negative differential transconductance (L-NDT) phenomenon. We also prove that such L-NDT phenomenon in specific bias ranges originates from a variable potential barrier at a graphene/WSe 2 junction due to a gate-controllable graphene electrode. This finding allows us to conceive graphene/WSe 2 -based MVL logic circuits by using the I D -V G characteristics with two distinctive V TH s. Based on this finding, we further demonstrate a light-triggered ternary inverter circuit with three stable logical states (ΔV out of each state <0.05 V). Our study offers the pathway to substantialize MVL systems.

MCLA-Berkshire Environmental Resource Center (BERC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monica Joslin

The Berkshire Environmental Resource Center at the Massachusetts College of Liberal Arts was established in 2005 to advance student and faculty research, promote environmental awareness and preservation throughout the community, and serve as a resource center for students, faculty, and community members. The project proposed is to enhance programming and outreach.

Heart Information Center

MedlinePlus

... Daily Conferences Fellowships and Residencies School of Perfusion Technology Education Resources Library & Learning Resource Center CME Resources THI Journal THI Cardiac Society Save the Date: International Symposium on Cardiovascular Regenerative ...

IR-based spot weld NDT in automotive applications

NASA Astrophysics Data System (ADS)

Chen, Jian; Feng, Zhili

2015-05-01

Today's auto industry primarily relies on destructive teardown evaluation to ensure the quality of the resistance spot welds (RSWs) due to their criticality in crash resistance and performance of vehicles. The destructive teardown evaluation is labor intensive and costly. The very nature of the destructive test means only a few selected welds will be sampled for quality. Most of the welds in a car are never checked. There are significant costs and risks associated with reworking and scrapping the defective welded parts made between the teardown tests. IR thermography as a non-destructive testing (NDT) tool has its distinct advantage — its non-intrusive and non-contact nature. This makes the IR based NDT especially attractive for the highly automated assembly lines. IR for weld quality inspection has been explored in the past, mostly limited to the offline post-processing manner in a laboratory environment. No online real-time RSW inspection using IR thermography has been reported. Typically for postprocessing inspection, a short-pulse heating via xenon flash lamp light (in a few milliseconds) is applied to the surface of a spot weld. However, applications in the auto industry have been unsuccessful, largely due to a critical drawback that cannot be implemented in the high-volume production line - the prerequisite of painting the weld surface to eliminate surface reflection and other environmental interference. This is due to the low signal-to-noise ratio resulting from the low/unknown surface emissivity and the very small temperature changes (typically on the order of 0.1°C) induced by the flash lamp method. An integrated approach consisting of innovations in both data analysis algorithms and hardware apparatus that effectively solved the key technical barriers for IR NDT. The system can be used for both real-time (during welding) and post-processing inspections (after welds have been made). First, we developed a special IR thermal image processing method that utilizes the relative IR intensity change, so that the influence of surface reflection and environment interference can be reduced. Second, for the post-processing inspection, a special induction heater is used to replace the flash lamp, resulting in temperature changes on the order of 10°C. As a result, the signal-to-noise ratio increased by several orders of magnitudes with no surface painting needed, and the inspection results are more accurate and reliable. For real-time inspection, the heat from welding (with temperature exceeding 1000°C) was utilized. Third, "thermal signatures" were identified to uniquely correlate to different weld quality attributes through computational modeling of heat transfer and extensive testing of specially designed ranges of welding conditions. Novel IR image analysis algorithms that automatically and intelligently identify the "thermal signatures" from the IR images and positively determine the weld quality in less than a second were developed.

Native Aging Visions: A Resource for Native Elders. Volume 1, 1994-97.

ERIC Educational Resources Information Center

Native Aging Visions, 1997

1997-01-01

This volume of newsletters reports on the activities and research projects of the National Resource Center on Native American Aging located at the University of North Dakota, Grand Forks. The Center studies health issues and access problems facing American Indian, Alaska Native, and Native Hawaiian elders. Specifically, the resource center was…

Adult Resource Center--A Community/University Project.

ERIC Educational Resources Information Center

Vegso, Kathryn A.

Cooperative planning, based upon a decade of reentry programs for adults, culminated in the establishment of a public service known as the Adult Resource Center at the University of Akron (Ohio). Located in a renovated building between the campus and the downtown community, the Adult Resource Center serves as a liaison with social service…

Damage assessment using advanced non-intrusive inspection methods: integration of space, UAV, GPR, and field spectroscopy

NASA Astrophysics Data System (ADS)

Themistocleous, Kyriacos; Neocleous, Kyriacos; Pilakoutas, Kypros; Hadjimitsis, Diofantos G.

2014-08-01

The predominant approach for conducting road condition surveys and analyses is still largely based on extensive field observations. However, visual assessment alone cannot identify the actual extent and severity of damage. New non-invasive and cost-effective non-destructive (NDT) remote sensing technologies can be used to monitor road pavements across their life cycle, including remotely sensed aerial and satellite visual and thermal image (AI) data, Unmanned Aerial Vehicles (UAVs), Spectroscopy and Ground Penetrating Radar (GRP). These non-contact techniques can be used to obtain surface and sub-surface information about damage in road pavements, including the crack depth, and in-depth structural failure. Thus, a smart and cost-effective methodology is required that integrates several of these non-destructive/ no-contact techniques for the damage assessment and monitoring at different levels. This paper presents an overview of how an integration of the above technologies can be used to conduct detailed road condition surveys. The proposed approach can also be used to predict the future needs for road maintenance; this information is proven to be valuable to a strategic decision making tools that optimizes maintenance based on resources and environmental issues.

NREL: Renewable Resource Data Center - Solar Resource Models and Tools

Science.gov Websites

Solar Resource Models and Tools The Renewable Resource Data Center (RReDC) features the following -supplied hourly average measured global horizontal data. NSRDB Data Viewer Visualize, explore, and download solar resource data from the National Solar Radiation Database. PVWatts® Calculator PVWattsÂ

EPA Center for Corporate Climate Leadership

EPA Pesticide Factsheets

EPA's Center for Corporate Climate Leadership is a comprehensive resource to help organizations measure & manage GHG emissions. The Center provides technical tools, educational resources, opportunities for information sharing & highlights best practices.

Microgravity

NASA Image and Video Library

2001-04-25

The arnual conference for the Educator Resource Center Network (ERCN) Coordinators was held at Glenn Research Center at Lewis Field in Cleveland, Ohio. The conference included participants from NASA's Educator Resource Centers located throughout the country. The Microgravity Science Division at Glenn sponsored a Microgravity Day for all the conference participants. Kathy Higgins of the National Center for Microgravity Research at GRC explains educational resources to teachers. This image is from a digital still camera; higher resolution is not available.

Lower Savannah aging, disability & transportation resource center : regional travel management and coordination center (TMCC) model and demonstration project.

DOT National Transportation Integrated Search

2014-10-01

This report details the deployed technology and implementation experiences of the Lower Savannah Aging, Disability & Transportation : Resource Center in Aiken, South Carolina, which served as the regional Travel Management and Coordination Center (TM...

Vocational Equity Resources from the Vocational Equity Resource Center.

ERIC Educational Resources Information Center

Wisconsin Univ., Madison. Vocational Studies Center.

This catalog identifies and describes 767 written and audiovisual resources on equity available on loan from the Vocational Equity Resource and Technical Assistance Center in Madison, Wisconsin. The publication lists materials under 44 headings: affirmative action, aging, apprenticeship, assessment instruments, bias-free communications,…

Transportation Safety Resource Center (TSRC) 2007.

DOT National Transportation Integrated Search

2009-11-01

The Transportation Safety Resource Center (TSRC) is the vital link in a collaborative : partnership created among federal and state transportation agencies, local stakeholders, : academic institutions, and the private sector to provide resources and ...

Preventing Falls and Related Fractures

MedlinePlus

... Resources For additional information on osteoporosis, contact: NIH Osteoporosis and Related Bone Diseases ~ National Resource Center Website: ... No. 15-7892 Last Reviewed 2015-04 NIH Osteoporosis and Related Bone Diseases ~ National Resource Center 2 ...

34 CFR 464.10 - How do States apply?

Code of Federal Regulations, 2010 CFR

2010-07-01

..., DEPARTMENT OF EDUCATION STATE LITERACY RESOURCE CENTERS PROGRAM How Does a State Apply for a Grant? § 464.10... grant for a State adult literacy resource center. (b) The Governors of a group of States may submit an application to the Secretary for a grant for a regional adult literacy resource center. (c) A State may apply...

The College Resource Centre. Colleges of Applied Arts and Technology.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto. School Planning and Building Research Section.

This booklet provides general guidelines for those involved in planning a resource center for the Colleges of Applied Arts and Technology, CAAT. The first section of the document concerns the formation of a resource center building committee and a broad outline of the various considerations to be included in planning the center program. The second…

Role of NDI in ABDR Assessment, Equipment & Logistics

DTIC Science & Technology

2010-05-01

RTO-EN-AVT-156 6 - 1 Role of NDI in ABDR Assessment, Equipment & Logistics Capt. (Dr.) Ferdinando Dolce Italian Air Force – Flight Test...showing results of NDT techniques applied on composite material structures. 1 . INTRODUCTION Damage assessment is one of the most important step...cured laminates applications (figure 1 ). Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of

Design Considerations for Remotely Operated Welding in Space: Task Definition and Visual Weld Monitoring Experiment

DTIC Science & Technology

1993-05-01

processes [48] ................ 91 Figure 4.14 Energy effectiveness comparison between EBW, GMAW , and PAW [48...1 10 Figure 5.2 The spectrum of control modes [76] ................. 112 Figure 5.3 Levels of control for GMAW [26...vehicular activity FTS Flight Telerobotic Servicer GMAW Gas metal arc welding GTAW Gas tungsten arc welding LEO Low-earth orbit NDT Non-destructive test

Evaluation of the Reliability and Sensitivity of NDT Methods for Titanium Alloys

DTIC Science & Technology

1974-06-01

Specimens Several ’hand forged billets (Ti-6Al-6V-2Sn) containing porosity have teen collected dtueing past internal programs. The porosity is depicted...offectiveneess •cf the systems are discussed in Section i-k of Llh:i,; l’(, porn . It should be kept in mind that tile pcl etrantm (wN(l t1111i. ý:tud:y

Defense Conference on Nondestructive Testing (28th), 27-29 November 1979

DTIC Science & Technology

1979-11-29

58 ’.Microencapsulated Penetrants, A Now Approach to Penetrant Inspection" • ........ Albert Olevitch, Wright- Patterson AEB, OH...J. Watts, Warren, MI 48090 ......................... 140 "Using NDT Methods to Influence the Aircraft Design Process,’ William L Andre, Moffett Field...Albert Olevitch Air Force Materialý Laboratory Attn: AFML/MXE Wright- Patterson AFB, OH 45433 Autovon 785-3691 ABSTRACT This paper describes the work

SWANEA (Southwest Asia-Northeast Africa): A Climatological Study. Volume 1. The Horn of Africa

DTIC Science & Technology

1990-06-01

Trough axes (interior Africa and Indian axes. West of the Ethiopian Highlands, the. convergent Ocean) can temporarily link tip along the Horn or Af~rica...FeqecisofVsibties in B pedo M kis, YemndHglns and p~~revailing di rectionfo Yemen u Haig (hlands. n piadwa ylni ufo rmteRba Musai), ana, ndT iz.Eatery ompnetsfor

Incremental growth of an upper crustal, A-type pluton, Argentina: Evidence of a re-used magma pathway

NASA Astrophysics Data System (ADS)

Alasino, Pablo H.; Larrovere, Mariano A.; Rocher, Sebastián; Dahlquist, Juan A.; Basei, Miguel A. S.; Memeti, Valbone; Paterson, Scott; Galindo, Carmen; Macchioli Grande, Marcos; da Costa Campos Neto, Mario

2017-07-01

Carboniferous igneous activity in the Sierra de Velasco (NW Argentina) led to the emplacement of several magmas bodies at shallow levels (< 2 kbar). One of these, the San Blas intrusive complex formed over millions of years (≤ 2-3 m.y.) through three periods of magma additions that are characterized by variations in magma sources and emplacement style. The main units, mostly felsic granitoids, have U-Pb zircon crystallization ages within the error range. From older to younger (based on cross-cutting relationships) intrusive units are: (1) the Asha unit (340 ± 7 Ma): a tabular to funnel-shaped intrusion emplaced during a regional strain field dominated by WSW-ENE shortening with contacts discordant to regional host-rock structures; (2) the San Blas unit (344 ± 2 Ma): an approximate cylindrical-shaped intrusion formed by multiple batches of magmas, with a roughly concentric fabric pattern and displacement of the host rock by ductile flow of about 35% of shortening; and (3) the Hualco unit (346 ± 6 Ma): a small body with a possible mushroom geometry and contacts concordant to regional host-rock structures. The magma pulses making up these units define two groups of A-type granitoids. The first group includes the peraluminous granitic rocks of the Asha unit generated mostly by crustal sources (εNdt = - 5.8 and εHft in zircon = - 2.9 to - 4.5). The second group comprises the metaluminous to peraluminous granitic rocks of the youngest units (San Blas and Hualco), which were formed by a heterogeneous mixture between mantle and crustal sources (εNdt = + 0.6 to - 4.8 and εHft in zircon = + 3 to - 6). Our results provide a comprehensive view of the evolution of an intrusive complex formed from multiple non-consanguineous magma intrusions that utilized the same magmatic plumbing system during downward transfer of host materials. As the plutonic system matures, the ascent of magmas is governed by the visco-elastic flow of host rock that for younger batches include older hot magma mush. The latter results in ductile downward flow of older, during rise of younger magma. Such complexes may reflect the plutonic portion of volcanic centers where chemically distinct magmas are erupted.

Development of Composite Honeycomb and Solid Laminate Reference Standards to Aid Aircraft Inspections

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dorrell, L.; Roach, D.

1999-03-04

The rapidly increasing use of composites on commercial airplanes coupled with the potential for economic savings associated with their use in aircraft structures means that the demand for composite materials technology will continue to increase. Inspecting these composite structures is a critical element in assuring their continued airworthiness. The FAA's Airworthiness Assurance NDI Validation Center, in conjunction with the Commercial Aircraft Composite Repair Committee (CACRC), is developing a set of composite reference standards to be used in NDT equipment calibration for accomplishment of damage assessment and post-repair inspection of all commercial aircraft composites. In this program, a series of NDImore » tests on a matrix of composite aircraft structures and prototype reference standards were completed in order to minimize the number of standards needed to carry out composite inspections on aircraft. Two tasks, related to composite laminates and non-metallic composite honeycomb configurations, were addressed. A suite of 64 honeycomb panels, representing the bounding conditions of honeycomb construction on aircraft, were inspected using a wide array of NDI techniques. An analysis of the resulting data determined the variables that play a key role in setting up NDT equipment. This has resulted in a prototype set of minimum honeycomb reference standards that include these key variables. A sequence of subsequent tests determined that this minimum honeycomb reference standard set is able to fully support inspections over the fill range of honeycomb construction scenarios. Current tasks are aimed at optimizing the methods used to engineer realistic flaws into the specimens. In the solid composite laminate arena, we have identified what appears to be an excellent candidate, G11 Phenolic, as a generic solid laminate reference standard material. Testing to date has determined matches in key velocity and acoustic impedance properties, as well as, low attenuation relative to carbon laminates. Furthermore, comparisons of resonance testing response curves from the G11 Phenolic prototype standard was very similar to the resonance response curves measured on the existing carbon and fiberglass laminates. NDI data shows that this material should work for both pulse-echo (velocity-based) and resonance (acoustic impedance-based) inspections. Additional testing and industry review activities are underway to complete the validation of this material.« less

Performance evaluation of multi-stratum resources integrated resilience for software defined inter-data center interconnect.

PubMed

Yang, Hui; Zhang, Jie; Zhao, Yongli; Ji, Yuefeng; Wu, Jialin; Lin, Yi; Han, Jianrui; Lee, Young

2015-05-18

Inter-data center interconnect with IP over elastic optical network (EON) is a promising scenario to meet the high burstiness and high-bandwidth requirements of data center services. In our previous work, we implemented multi-stratum resources integration among IP networks, optical networks and application stratums resources that allows to accommodate data center services. In view of this, this study extends to consider the service resilience in case of edge optical node failure. We propose a novel multi-stratum resources integrated resilience (MSRIR) architecture for the services in software defined inter-data center interconnect based on IP over EON. A global resources integrated resilience (GRIR) algorithm is introduced based on the proposed architecture. The MSRIR can enable cross stratum optimization and provide resilience using the multiple stratums resources, and enhance the data center service resilience responsiveness to the dynamic end-to-end service demands. The overall feasibility and efficiency of the proposed architecture is experimentally verified on the control plane of our OpenFlow-based enhanced SDN (eSDN) testbed. The performance of GRIR algorithm under heavy traffic load scenario is also quantitatively evaluated based on MSRIR architecture in terms of path blocking probability, resilience latency and resource utilization, compared with other resilience algorithms.

Continuum of Care

MedlinePlus

... Brain Tumor Treatment Locations Treatment Side Effects & their Management Support and Resources Caregiver Resource Center Pediatric Caregiver Resource Center About Us Our Founders Board of Directors Staff Leadership Strategic Plan Financials News Careers Brain Tumor Information Brain Anatomy Brain ...

Small Scale Turbopump Manufacturing Technology and Material Processes

NASA Technical Reports Server (NTRS)

Alvarez, Erika; Morgan, Kristin; Wells, Doug; Zimmerman, Frank

2011-01-01

As part of an internal research and development project, NASA Marshall Space Flight Center (MSFC) has been developing a high specific impulse 9,000-lbf LOX/LH2 pump-fed engine testbed with the capability to throttle 10:1. A Fuel Turbopump (FTP) with the ability to operate across a speed range of 30,000-rpm to 100,000-rpm was developed and analyzed. This small size and flight-like Fuel Turbopump has completed the design and analysis phase and is currently in the manufacturing phase. This paper highlights the manufacturing and processes efforts to fabricate an approximately 20-lb turbopump with small flow passages, intricately bladed components and approximately 3-in diameter impellers. As a result of the small scale and tight tolerances of the hardware on this turbopump, several unique manufacturing and material challenges were encountered. Some of the technologies highlighted in this paper include the use of powder metallurgy technology to manufacture small impellers, electron beam welding of a turbine blisk shroud, and casting challenges. The use of risk reduction efforts such as non-destructive testing (NDT) and evaluation (NDE), fractography, material testing, and component spin testing are also discussed in this paper.

The correlation between acoustic and magnetic properties in the long working metal boiler drum with the parameters of the electron microscope

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ababkov, Nikolai, E-mail: n.ababkov@rambler.ru; Smirnov, Alexander, E-mail: galvas.kem@gmail.com

The present paper presents comparative analysis of measurement results of acoustic and magnetic properties in long working metal of boiler drums and the results obtained by methods of electronic microscopy. The structure of the metal sample from the fracture zone to the base metal (metal working sample long) and the center of the base metal before welding (weld metal sample) was investigated by electron microscopy. Studies performed by spectral acoustic, magnetic noise and electron microscopic methods were conducted on the same plots and the same samples of long working and weld metal of high-pressure boiler drums. The analysis of researchmore » results showed high sensitivity of spectral-acoustic and magnetic-noise methods to definition changes of microstructure parameters. Practical application of spectral-acoustic and magnetic noise NDT method is possible for the detection of irregularities and changes in structural and phase state of the long working and weld metal of boiler drums, made of a special molybdenum steel (such as 20M). The above technique can be used to evaluate the structure and physical-mechanical properties of the long working metal of boiler drums in the energy sector.« less

TNWRRC | The University of Tennessee, Knoxville

Science.gov Websites

Resources Job Postings & Job Boards Funding & Research Opportunities Web Resources Water Expertise Give to UT Tennessee Water Resources Research Center (TNWRRC) Institute for a Secure and Sustainable Environment (ISSE) various pictures from WRRC projects The Tennessee Water Resources Research Center (TNWRRC

40 CFR 141.402 - Ground water source microbial monitoring and analytical methods.

Code of Federal Regulations, 2010 CFR

2010-07-01

.../1604sp02.pdf or from EPA's Water Resource Center (RC-4100T), 1200 Pennsylvania Avenue, NW., Washington, DC... available at http://www.epa.gov/nerlcwww/1600sp02.pdf or from EPA's Water Resource Center (RC-4100T), 1200.../1601ap01.pdf or from EPA's Water Resource Center (RC-4100T), 1200 Pennsylvania Avenue, NW., Washington, DC...

34 CFR 464.22 - May a State participating in a regional center use part of its allotment for a State center?

Code of Federal Regulations, 2010 CFR

2010-07-01

... EDUCATION STATE LITERACY RESOURCE CENTERS PROGRAM How Does the Secretary Make a Grant to a State? § 464.22... part of a regional center to reserve a portion of those funds for a State adult literacy resource...

Annotated Resource List of Peace Education Resources Available from Wilmington College Peace Resource Center, Hiroshima/Nagasaki Memorial Collection.

ERIC Educational Resources Information Center

Wilmington Coll., OH. Peace Resource Center.

Over 130 print and nonprint peace education resources for use with adult groups and elementary, secondary, and college students are described. Audiovisuals may be rented and books may be purchased from the Wilmington College (Ohio) Peace Resource Center. Audiovisuals, including slides, videotapes and videotape cassettes, and 16mm films, are…

78 FR 24756 - Health Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-26

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Health Center Program AGENCY: Health Resources and Services Administration, HHS. ACTION: Notice of Noncompetitive Replacement Award to Genesee Health System. SUMMARY: The Health Resources and Services Administration (HRSA...

75 FR 2549 - Health Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-15

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Health Center Program AGENCY: Health Resources and Services Administration, HHS ACTION: Notice of Noncompetitive Replacement Award to Regional Health Care Affiliates. SUMMARY: The Health Resources and Services...

76 FR 1441 - Health Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-10

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Health Center Program AGENCY: Health Resources and Services Administration, HHS. ACTION: Notice of Noncompetitive Replacement Awards to Sunset Park Health Council, Inc. SUMMARY: The Health Resources and Services...

75 FR 21001 - Health Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-22

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Health Center Program AGENCY: Health Resources and Services Administration, HHS. ACTION: Notice of Noncompetitive Replacement Awards to Cornerstone Care, Inc. SUMMARY: The Health Resources and Services Administration (HRSA...

76 FR 17139 - Health Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-28

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Health Center Program AGENCY: Health Resources and Services Administration, HHS. ACTION: Notice of Noncompetitive Replacement Awards to Sunset Park Health Council, Inc. SUMMARY: The Health Resources and Services...

A Comparison of Two Methods for Online Delivery of Biorenewable Resources and Technology Course Content

ERIC Educational Resources Information Center

Jarboe, Darren H.

2012-01-01

In 2007, a Virtual Education Center for Biorenewable Resources was initiated (Raman, Brown, Brumm, Anex, Euken, Nokes, Crofcheck, Van Gerpen, and He, 2006). The Center offered three courses through distance education, including Biorenewable Resources and Technology (BRT) 501--Fundamentals of Biorenewable Resources and Technology. The main…

Resources to Support Ethical Practice in Evaluation: An Interview with the Director of the National Center for Research and Professional Ethics

ERIC Educational Resources Information Center

Goodyear, Leslie

2012-01-01

Where do evaluators find resources on ethics and ethical practice? This article highlights a relatively new online resource, a centerpiece project of the National Center for Professional and Research Ethics (NCPRE), which brings together information on best practices in ethics in research, academia, and business in an online portal and center. It…

75 FR 73110 - Health Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Health Center Program AGENCY: Health Resources and Services Administration, HHS. ACTION: Notice of Noncompetitive Replacement Awards to Upper Room AIDS Ministry, Inc. SUMMARY: The Health Resources and Services Administration...

75 FR 53701 - Health Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Health Center Program AGENCY: Health Resources and Services Administration, HHS. ACTION: Notice of Non-competitive Replacement Awards to Sunset Park Health Council, Inc. SUMMARY: The Health Resources and Services...

75 FR 32797 - Health Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-09

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Health Center Program AGENCY: Health Resources and Services Administration, HHS. ACTION: Notice of Noncompetitive Replacement Awards to Albany Area Primary Health Care, Inc. SUMMARY: The Health Resources and Services...

78 FR 25457 - Health Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Health Center Program AGENCY: Health Resources and Services Administration, HHS. ACTION: Notice of Administrative...: The Health Resources and Services Administration (HRSA) will be issuing a non-competitive award of...

The Effects of Yoga, Massage, and Reiki on Patient Well-Being at a Cancer Resource Center.

PubMed

Rosenbaum, Mark S; Velde, Jane

2016-06-01

Cancer resource centers offer patients a variety of therapeutic services. However, patients with cancer and cancer healthcare practitioners may not fully understand the specific objectives and benefits of each service. This research offers guidance to cancer healthcare practitioners on how they can best direct patients to partake in specific integrative therapies, depending on their expressed needs. This article investigates the effects of yoga, massage, and Reiki services administered in a cancer resource center on patients' sense of personal well-being. The results show how program directors at a cancer resource center can customize therapies to meet the needs of patients' well-being. The experimental design measured whether engaging in yoga, massage, or Reiki services affects the self-perceived well-being of 150 patients at a cancer resource center at two times. All three services helped decrease stress and anxiety, improve mood, and enhance cancer center patrons' perceived overall health and quality of life in a similar manner. Reiki reduced the pain of patients with cancer to a greater extent than either massage or yoga.

Amarillo National Resource Center for Plutonium. Quarterly technical progress report, May 1, 1997--July 31, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Progress summaries are provided from the Amarillo National Center for Plutonium. Programs include the plutonium information resource center, environment, public health, and safety, education and training, nuclear and other material studies.

34 CFR 464.21 - May the Secretary require a State to participate in a regional center?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE LITERACY RESOURCE CENTERS... expand an existing State literacy resource center that meets the purposes of the Act and the requirements...

Feasibility of Prostate Cancer Diagnosis by Transrectal Photoacoustic Imaging

DTIC Science & Technology

2012-03-01

cancer detection; needle biopsy is the current practice for diagnosis of the disease, aiming randomly in the prostate. Transrectal ultrasound has...been used as a guiding tool to direct tissue needle biopsy for prostate cancer diagnosis; it cannot be utilized for detecting prostate cancer due to...Research Systems, CA) and used as a reference signal. The sample and the ultrasound transducer (UST, Olympus NDT, one inch in focal length) are

Underwater Nondestructive Testing of Ship Hull Welds

DTIC Science & Technology

1979-09-01

Norske Veritas. 5. Alan Taylor , Underwater Testing, Marine rechnology (Germany) Dec 1971, pp. 251-2. 6. Ship Underwater Maintenance, Evaluation and Repair...11. Peters, V. "NDT for Offshore Drilling Platform Structure," Welding end Metal Fabricatior, Jul 1973, V. 41-7. 12. Taylor , A., "Underwater...N. Cordea, Chairman, Senior Staff MetalZlugiet, ARMCO INC., Middletown, OH Mr. W. C. Brayton , Aset. to Gener•l Manager, Bethlehem Steel Corp

Advanced Computational Models for Fabric-Reinforced Composites

DTIC Science & Technology

2001-10-01

composites. Trans-Science Corporation 3655 Nobel Drive Suite 440 San Diego, CA 92122-1005 Tel (858) 459-1240 http://www.compositesolutionsinc.com...also based in XP! Material Suppliers San Diego, recently developed the only Newsletters comprehensive design software for the seismic NDT, NDE , NDI...composite bus. Trans-Science Corporation 3655 Nobel Drive Suite 440 San Diego, CA 92122-1005 Tel (858) 459-1240 Fax (858) 459-0210 •’(S-HOME SERVICES

Wide-Area Traffic Management for Cloud Services

DTIC Science & Technology

2012-04-01

performance prediction tools [11], which are usually load oblivious. Therefore, without information about link loads and capacities, a CDN may direct...powerful tool . DONAR allows its customers to dictate a replica’s (i) split weight, wi, the desired proportion of requests that a particular replica i...Diagnostic Tool (NDT) [100], which is used for the Federal Communication Commission’s Consumer Broadband Test, and NPAD [101]—are more closely integrated with

Acoustic emission from composite materials. [nondestructive tests

NASA Technical Reports Server (NTRS)

Visconti, I. C.; Teti, R.

1979-01-01

The two basic areas where the acoustic emission (AE) technique can be applied are materials research and the evaluation of structural reliability. This experimental method leads to a better understanding of fracture mechanisms and is an NDT technique particularly well suited for the study of propagating cracks. Experiments are described in which acoustic emissions were unambiguously correlated with microstructural fracture mechanisms. The advantages and limitations of the AE technique are noted.

Development of inspection robots for bridge cables.

PubMed

Yun, Hae-Bum; Kim, Se-Hoon; Wu, Liuliu; Lee, Jong-Jae

2013-01-01

This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented.

Ultrasonic Guided Wave Technology for Non-Invasive Assessment of Corrosion-Induced Damage in Piping for Pollution Prevention in DOD Fuel Storage Facilities

DTIC Science & Technology

2011-08-01

using a mixture of rock salt and tap water. A combination of lacquer and duct tape was used to mask the desired corrosion areas and to prevent excessive...Corrosion Measurements," NDT efT E International, Vol. 37, No.3, 2004, pp. 167-180. Demma, A, P. Cawley, M. Lowe and B. Pavlakovic, "The Effect of

Review of Literature on Probability of Detection for Liquid Penetrant Nondestructive Testing

DTIC Science & Technology

2011-11-01

increased maintenance costs , or catastrophic failure of safety- critical structure. Knowledge of the reliability achieved by NDT methods, including...representative components to gather data for statistical analysis, which can be prohibitively expensive. To account for sampling variability inherent in any...Sioux City and Pensacola. (Those recommendations were discussed in Section 3.4.) Drury et al report on a factorial experiment aimed at identifying the

Research of Extension of the Life Cycle of Helicopter Rotor Blade in Hungary

DTIC Science & Technology

2003-02-01

Radiography (DXR), and (iii) Vibration Diagnostics (VD) with Statistical Energy Analysis (SEA) were semi- simultaneously applied [1]. The used three...2.2. Vibration Diagnostics (VD)) Parallel to the NDT measurements the Statistical Energy Analysis (SEA) as a vibration diagnostical tool were...noises were analysed with a dual-channel real time frequency analyser (BK2035). In addition to the Statistical Energy Analysis measurement a small

High-frequency ultrasonic methods for determining corrosion layer thickness of hollow metallic components.

PubMed

Liu, Hongwei; Zhang, Lei; Liu, Hong Fei; Chen, Shuting; Wang, Shihua; Wong, Zheng Zheng; Yao, Kui

2018-05-16

Corrosion in internal cavity is one of the most common problems occurs in many hollow metallic components, such as pipes containing corrosive fluids and high temperature turbines in aircraft. It is highly demanded to non-destructively detect the corrosion inside hollow components and determine the corrosion extent from the external side. In this work, we present two high-frequency ultrasonic non-destructive testing (NDT) technologies, including piezoelectric pulse-echo and laser-ultrasonic methods, for detecting corrosion of Ni superalloy from the opposite side. The determination of corrosion layer thickness below ∼100 µm has been demonstrated by both methods, in comparison with X-CT and SEM. With electron microscopic examination, it is found that with multilayer corrosion structure formed over a prolonged corrosion time, the ultrasonic NDT methods can only reliably reveal outer corrosion layer thickness because of the resulting acoustic contrast among the multiple layers due to their respective different mechanical parameters. A time-frequency signal analysis algorithm is employed to effectively enhance the high frequency ultrasonic signal contrast for the piezoelectric pulse-echo method. Finally, a blind test on a Ni superalloy turbine blade with internal corrosion is conducted with the high frequency piezoelectric pulser-receiver method. Copyright © 2018 Elsevier B.V. All rights reserved.

Local defect resonance (LDR): A route to highly efficient thermosonic and nonlinear ultrasonic NDT

NASA Astrophysics Data System (ADS)

Solodov, Igor

2014-02-01

The concept of LDR is based on the fact that inclusion of a defect leads to a local drop of rigidity for a certain mass of the material that should manifest in a particular characteristic frequency of the defect. A frequency match between the driving ultrasonic wave and this characteristic frequency provides an efficient energy pumping from the wave directly into the defect. For simulated and realistic defects in various materials the LDR-induced local resonance increase in the vibration amplitude averages up to ˜ (20-40 dB). Due to a strong resonance amplification of the local vibrations, the LDR-driven defects manifest a profound nonlinearity even at moderate ultrasonic excitation level. The nonlinearity combined with resonance results in efficient generation of the higher harmonics and is also used as a filter/amplifier in the frequency mixing mode of nonlinear NDT. The LDR high-Q thermal response enables to realize a frequency-selective imaging with an opportunity to distinguish between different defects by changing the driving frequency. The LDR-thermosonics requires much lower acoustic power to activate defects that makes it possible to avoid high-power ultrasonic instrumentation and proceed to a noncontact ultrasonic thermography by using air-coupled ultrasonic excitation.

ESTIMATION OF CRACK-ARREST TOUGHNESS TRANSITION AND NDT TEMPERATURES FROM CHARPY FORCE-DISPLACEMENT IMPACT TRACES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sokolov, Mikhail A

2010-01-01

A force-displacement trace of a Charpy impact test of a reactor pressure vessel (RPV) steel in the transition range has a characteristic point, the so-called force at the end of unstable crack propagation , Fa. A two-parameter Weibull probability function is used to model the distribution of the Fa in Charpy tests performed at ORNL on different RPV steels in the unirradiated and irradiated conditions. These data have a good replication at a given test temperature, thus, the statistical analysis was applicable. It is shown that when temperature is normalized to TNDT (T-TNDT) or to T100a (T-T100a), the median Famore » values of different RPV steels have a tendency to form the same shape of temperature dependence. Depending on normalization temperature, TNDT or T100a, it suggests a universal shape of the temperature dependence of Fa for different RPV steels. The best fits for these temperature dependencies are presented. These dependencies are suggested for use in estimation of NDT or T100a from randomly generated Charpy impact tests. The maximum likelihood methods are used to derive equations to estimate TNDT and T100a from randomly generated Charpy impact tests.« less

Constructing Student Learning through Faculty Development: Writing Experts, Writing Centers, and Faculty Resources

ERIC Educational Resources Information Center

Werner, Courtney L.

2013-01-01

In this article, the author explains how a writing center can be a potential host for housing writing instruction across the disciplines. She recommends writing centers act as hosts for various faculty development opportunities throughout the semester, and states that these centers can also hold faculty development resources and collaborative…

75 FR 60066 - Southern Arizona Resource Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-29

... DEPARTMENT OF AGRICULTURE Forest Service Southern Arizona Resource Advisory Committee AGENCY: Forest Service, USDA. ACTION: Notice of meeting. SUMMARY: The Southern Arizona Resource Advisory... at the Tucson Interagency Fire Center, 2646 E. Commerce Center Place, Tucson, AZ 85706. Send written...

The WHO/PEPFAR collaboration to prepare an operations manual for HIV prevention, care, and treatment at primary health centers in high-prevalence, resource-constrained settings: defining laboratory services.

PubMed

Spira, Thomas; Lindegren, Mary Lou; Ferris, Robert; Habiyambere, Vincent; Ellerbrock, Tedd

2009-06-01

The expansion of HIV/AIDS care and treatment in resource-constrained countries, especially in sub-Saharan Africa, has generally developed in a top-down manner. Further expansion will involve primary health centers where human and other resources are limited. This article describes the World Health Organization/President's Emergency Plan for AIDS Relief collaboration formed to help scale up HIV services in primary health centers in high-prevalence, resource-constrained settings. It reviews the contents of the Operations Manual developed, with emphasis on the Laboratory Services chapter, which discusses essential laboratory services, both at the center and the district hospital level, laboratory safety, laboratory testing, specimen transport, how to set up a laboratory, human resources, equipment maintenance, training materials, and references. The chapter provides specific information on essential tests and generic job aids for them. It also includes annexes containing a list of laboratory supplies for the health center and sample forms.

78 FR 42788 - School-Based Health Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration School-Based Health Center Program AGENCY: Health Resources and Services Administration (HRSA), Department of Health... Gadsden County. SUMMARY: HRSA will be transferring a School-Based Health Center Capital (SBHCC) Program...

National Center for Farmworker Health

MedlinePlus

... Access Data Health Centers Population Estimates Resources Performance Management & Governance Tool Box > Administrative Governance Human Resources Needs Assessment Service Delivery Emergency Preparedness Call for ...

Inclusive Schools. Topical Bibliography on Inclusive Schools.

ERIC Educational Resources Information Center

Sorenson, Barbara, Comp.; Drill, Janet, Comp.

This abstract bibliography of approximately 200 references looks at various aspects of inclusive schools. References are a result of computer searches of three databases: the Educational Resources Information Center (ERIC), Exceptional Child Education Resources, and the Western Regional Resources Center. Preliminary information includes directions…

Combination of GPR with other NDT techniques in different fields of application - COST Action TU1208

NASA Astrophysics Data System (ADS)

Solla, Mercedes; Pérez-Gracia, Vega; Fontul, Simona; Santos-Assunçao, Sonia; Kucukdemirci, Melda

2017-04-01

During the last decades, there has been a continuous increase in the use of non-destructive testing (NDT) applied to many aspects related to civil engineering and other fields such as geology or sedimentology, archaeology and either monument or cultural heritage. This is principally due to the fact that most NDT methods work remotely, that is, without direct contact, while adding information of non-visible areas. Particularly, geophysics has significantly benefited the procedures for inspection and also, successfully solved some of the limitations of traditional methods such as a lack of objectiveness, destructive testing, loss of safety during infrastructure inspection, and also, low rates of production. The different geophysical methodologies are based on the measurement of physical properties of media. However, all geophysical methods are sensitive to different physical parameters and the success of these methods is related to the nature of the buried features themselves, in terms of their physical and geometric properties, soil conditions, operational factors such as the sensitivity of equipment and etc. Consequently, taking into account all of these factors, to obtain reliable and complementary results, multiple geophysical methods rather than single method and moreover data integration approaches are recommended to provide accurate interpretations. This work presents some examples of combination of Ground-Penetrating Radar (GPR) with other NDT techniques in different fields of application (pavements/railways, archaeological sites, monuments, and stratigraphy in beaches and bathymetries). An example of combination of GPR and Falling Weight Deflectometer (FWD) to assess the bearing capacity of flexible pavement is described as the most efficient structural evaluation of pavements and one of the most commonly applications of the methods on civil engineering inspections. Results of archaeogeophysical field surveys in Turkey are also included by combining the most common geophysical methods used for archaeological prospection (GPR and magnetometry). Regarding cultural heritage, an example in Barcelona (Spain) of the assessment of masonry structural elements, with embedded metallic targets, is included. Seismic tomography and 3D GPR imaging are applied, both supported with endoscopy. The results highlight the most affected areas of the structure and the existence of corroded metallic elements as consequence of humidity. Finally, two case studies support the importance of combining data in geological applications. Firstly, GPR and Electrical Resistivity Tomography (ERT) were combined for the analysis of the littoral drift and the tidal range affecting the transport of sediments in costal environments, and more particularly in O Adro Beach, in Vigo (Spain) that had been subjected to extension activities during the last decades. Secondly, the combination Multibeam Sonar and GPR data is presented for the study of a lake, which is an abandoned kaolin mine. Thus, it was possible to analyze the column of water in all the extension of the lake, while differentiating layers of lacustrine deposits and kaolin rock formations in subsurface. This work represents a contribution to the COST (European Cooperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar". The authors thank COST for funding the Action TU1208.

Model for a patient-centered comparative effectiveness research center.

PubMed

Costlow, Monica R; Landsittel, Douglas P; James, A Everette; Kahn, Jeremy M; Morton, Sally C

2015-04-01

This special report describes the systematic approach the University of Pittsburgh and the University of Pittsburgh Medical Center (UPMC) undertook in creating an infrastructure for comparative effectiveness and patient-centered outcomes research resources. We specifically highlight the administrative structure, communication and training opportunities, stakeholder engagement resources, and support services offered. © 2015 Wiley Periodicals, Inc.

76 FR 62814 - National Center For Research Resources; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-11

..., Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93.389, Research... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center For Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

75 FR 32187 - National Center for Research Resources: Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-07

..., Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93.389, Research... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

Regional Resource Initiative. A Blueprint for Sharing Resources and Expertise in Adult Education and Literacy across State Lines.

ERIC Educational Resources Information Center

Tennessee Univ., Knoxville. Center for Literacy Studies.

The Arizona Adult Literacy and Technology Resource Center and the University of Tennessee's Center for Literacy Studies undertook a collaborative project to explore the feasibility and effectiveness of regional sharing of resources and expertise in field of adult education and literacy education. The project's goals were as follows: involve a…

Corrosion Induced Loss of Capacity and Development of a Guided Wave Condition Assessment Method for Multistrand Anchor Systems Used in Corps Projects

DTIC Science & Technology

2014-08-01

installing high-capacity, post-tensioned foundation anchors. These stressed steel tendons have been used to strengthen hydraulic concrete structures and to...Field Inspection in Mass Concrete .................................... 32 3.3 NDT Technologies in General for Seven Strand Wire Cable Inspection...rod end of a 1.31-inch-diameter grease embedded trunion anchor rod with concrete termination. ..................... 37 Figure 32. 441 Khz narrow

Development of Inspection Robots for Bridge Cables

PubMed Central

Kim, Se-Hoon; Lee, Jong-Jae

2013-01-01

This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented. PMID:24459453

Nondestructive Evaluation Technology Initiatives Program II (NTIP II). Delivery Order 10, Task 010-015: In Search of Excellence - An Historical Review

DTIC Science & Technology

2006-05-01

NDT support, including radiography and magnetic particle inspections , to hundreds of laboratory investigations pertaining to malfunction or failure... radiography for inspecting boron fi ber reinforced alloys of aluminum, nickel and titanium, thus offering an increased resolution over conventional...providing CT inspection capability for Minuteman 3rd stage rocket boosters and an assortment of Department of Defense (DOD) munitions (i.e. AMRAAM

NDT of railway components using induction thermography

NASA Astrophysics Data System (ADS)

Netzelmann, U.; Walle, G.; Ehlen, A.; Lugin, S.; Finckbohner, M.; Bessert, S.

2016-02-01

Induction or eddy current thermography is used to detect surface cracks in ferritic steel. The technique is applied to detect surface cracks in rails from a moving test car. Cracks were detected at a train speed between 2 and 15 km/h. An automated demonstrator system for testing railway wheels after production is described. While the wheel is rotated, a robot guides the detection unit consisting of inductor and infrared camera over the surface.

77 FR 59595 - Procurement List; Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-28

... which would accomplish the objectives of the Javits-Wagner-O'Day Act (41 U.S.C. 8501-8506) in connection..., Defense Manpower Data Center, Defense Human Resource Center, Alexandria, VA (CONUS) NPA: InspiriTec, Inc., Philadelphia, PA Contracting Activity: DEFENSE HUMAN RESOURCES ACTIVITY, HQS DEFENSE HUMAN RESOURCES ACTY...

The Web Resource Collaboration Center

ERIC Educational Resources Information Center

Dunlap, Joanna C.

2004-01-01

The Web Resource Collaboration Center (WRCC) is a web-based tool developed to help software engineers build their own web-based learning and performance support systems. Designed using various online communication and collaboration technologies, the WRCC enables people to: (1) build a learning and professional development resource that provides…

Resource Centers for Gifted Education.

ERIC Educational Resources Information Center

Clark, Linda R.; And Others

1995-01-01

Shared Information Services is a state-operated network of four resource centers for gifted education in Indiana. The network provides support in the areas of program development, teacher education, classroom teaching resources, and program evaluation. A variety of library and technical assistance services is provided to teachers and others by…

76 FR 29254 - National Center for Research Resources; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... Federal Domestic Assistance Program Nos. 93.306, Comparative Medicine; 93.333, Clinical Research; 93.371... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

75 FR 32187 - National Center for Research Resources; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-07

... Program Nos. 93.306, Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

75 FR 52538 - National Center for Research Resources; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

.... 93.306, Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93.389... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

76 FR 369 - National Center for Research Resources; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-04

.... 93.306, Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93.389... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

76 FR 6627 - National Center for Research Resources; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-07

.... 93.306, Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93.389... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

76 FR 12123 - National Center for Research Resources; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

... Domestic Assistance Program Nos. 93.306, Comparative Medicine; 93.333, Clinical Research; 93.371... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

75 FR 54895 - National Center for Research Resources; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-09

... Assistance Program Nos. 93.306, Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

76 FR 4121 - National Center for Research Resources; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-24

... Nos. 93.306, Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93.389... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

76 FR 59709 - National Center for Research Resources; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

... Program Nos. 93.306, Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

76 FR 16797 - National Center for Research Resources; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-25

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special... funding cycle. (Catalogue of Federal Domestic Assistance Program Nos. 93.306, Comparative Medicine; 93.333...

75 FR 28262 - National Center for Research Resources; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-20

....306, Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93.389, Research... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

76 FR 57748 - National Center for Research Resources; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Program Nos. 93.306, Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

Perspectives. Fall 2009

ERIC Educational Resources Information Center

PEPNet, 2009

2009-01-01

PEPNet's "Perspectives" is the collaborative newsletter of the four PEPNet regional centers. This newsletter combines each centers individual strengths into a single resource that can be used on a national level. The issue focuses on the following topics: (1) Web Tool Locates Needed Resources; (2) Family Center on Technology and Disability (Ana…

76 FR 40384 - National Center for Research Resources; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-08

.... 93.306, Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93.389... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

75 FR 61768 - National Center for Research Resources; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

....306, Comparative Medicine; 93.333, Clinical Research; 93.371, Biomedical Technology; 93.389, Research... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Center for Research... unwarranted invasion of personal privacy. Name of Committee: National Center for Research Resources Special...

75 FR 55588 - Family-to-Family Health Information Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-13

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Family-to-Family Health Information Center Program AGENCY: Health Resources and Services Administration, HHS... Florida Family-to-Family Health Information Center (F2F HIC) grant (H84MC00006) from the Florida Institute...

Instructional Technology and Learning Resource Center-Based Community Education.

ERIC Educational Resources Information Center

Brown, James W.

A survey of nonformal community education activities was conducted to determine specific use of media for identified educational and informational purposes. The results presented in this report are intended to provide resource information to professionals and paraprofessionals who ultimately may be employed in Learning Resource Center-Based…

The Electronic School Library Resource Center: Facilities Planning for the New Information Technologies.

ERIC Educational Resources Information Center

Blodgett, Teresa; Repman, Judi

1995-01-01

Addresses the necessity of incorporating new computer technologies into school library resource centers and notes some administrative challenges. An extensive checklist is provided for assessing equipment and furniture needs, physical facilities, and rewiring needs. A glossary of 20 terms and 11 additional resources is included. (AEF)

34 CFR 464.11 - What must an application contain?

Code of Federal Regulations, 2010 CFR

2010-07-01

... ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE LITERACY RESOURCE CENTERS PROGRAM How Does a State Apply... group of States will— (a) Develop a literacy resource center or expand an existing literacy resource... organizations; (d) Address the measurable goals for improving literacy levels as set forth in the plan submitted...

International Students' Enhanced Academic Performance: Effects of Campus Resources

ERIC Educational Resources Information Center

Banjong, Delphine N.

2015-01-01

This article investigates international students' challenges, such as financial, English proficiency, loneliness/homesickness in the United States. In addition, it assesses how these students coped with such difficulties by making use of resources on campus, such as an international center, writing center, counseling center, and the student…

Fibrous Dysplasia

MedlinePlus

... No. 15-7774 Last Reviewed 2015-06 NIH Osteoporosis and Related Bone Diseases ~ National Resource Center 2 ... your language or another language, contact the NIH Osteoporosis and Related Bone Diseases ~ National Resource Center at ...

Metals and Ceramics Information Center.

DTIC Science & Technology

1981-07-01

Systems RESOURCE MANAGEMENT AND ECONOMIC ANALYSIS a Ordnance Technology a Space Systems and Applications a Biomass Resources 6 Business Planning • Economics ...r 19 KEY WORDS (Cwintince on reverse side 4 neressery and identify by block numnber) Technical Information Center Composites DoD Information Analysis ...The Metals and Ceramics Information Center (MCIC) is one of the technical Information Analysis Centers (IAC’s) chartered and sponsored by the

Crib Information Center

MedlinePlus

... Community Outreach Resource Center Toy Recall Statistics CO Poster Contest Pool Safely Business & Manufacturing Business & Manufacturing Business ... other organizations. Featured Resources Bare is Best Free Poster Safer Spaces for Babies Safety Guide Inflatable Air ...

Osteogenesis Imperfecta Overview

MedlinePlus

... 15-AR-8004 Last Reviewed 2015-06 NIH Osteoporosis and Related Bone Diseases ~ National Resource Center 2 ... your language or another language, contact the NIH Osteoporosis and Related Bone Diseases ~ National Resource Center at ...

Evaluating IAIMS at Yale: information access.

PubMed

Grajek, S E; Calarco, P; Frawley, S J; McKay, J; Miller, P L; Paton, J A; Roderer, N K; Sullivan, J E

1997-01-01

To evaluate use of information resources during the first year of IAIMS implementation at the Yale-New Haven Medical Center. The evaluation asked: (1) Which information resources are being used? (2) Who uses information resources? (3) Where are information resources used? (4) Are multiple sources of information being integrated? Measures included monthly usage data for resources delivered network-wide, in the Medical Library, and in the Hospital; online surveys of library workstation users; an annual survey of a random, stratified sample of Medical Center faculty, postdoctoral trainees, students, nurses, residents, and managerial and professional staff; and user comments. Eighty-three percent of the Medical Center community use networked information resources, and use of resources is increasing. Both status (faculty, student, nurse, etc.) and mission (teaching, research, patient care) affect use of individual resources. Eighty-eight percent of people use computers in more than one location, and increases in usage of traditional library resources such as MEDLINE are due to increased access from outside the Library. Both survey and usage data suggest that people are using multiple resources during the same information seeking session. Almost all of the Medical Center community is using networked information resources in more settings. It is necessary to support increased demand for information access from remote locations and to specific populations, such as nurses. People are integrating information from multiple sources, but true integration within information systems is just beginning. Other institutions are advised to incorporate pragmatic evaluation into their IAIMS activities and to share evaluation results with decision-makers.

Health Extension in New Mexico: An Academic Health Center and the Social Determinants of Disease

PubMed Central

Kaufman, Arthur; Powell, Wayne; Alfero, Charles; Pacheco, Mario; Silverblatt, Helene; Anastasoff, Juliana; Ronquillo, Francisco; Lucero, Ken; Corriveau, Erin; Vanleit, Betsy; Alverson, Dale; Scott, Amy

2010-01-01

The Agricultural Cooperative Extension Service model offers academic health centers methodologies for community engagement that can address the social determinants of disease. The University of New Mexico Health Sciences Center developed Health Extension Rural Offices (HEROs) as a vehicle for its model of health extension. Health extension agents are located in rural communities across the state and are supported by regional coordinators and the Office of the Vice President for Community Health at the Health Sciences Center. The role of agents is to work with different sectors of the community in identifying high-priority health needs and linking those needs with university resources in education, clinical service and research. Community needs, interventions, and outcomes are monitored by county health report cards. The Health Sciences Center is a large and varied resource, the breadth and accessibility of which are mostly unknown to communities. Community health needs vary, and agents are able to tap into an array of existing health center resources to address those needs. Agents serve a broader purpose beyond immediate, strictly medical needs by addressing underlying social determinants of disease, such as school retention, food insecurity, and local economic development. Developing local capacity to address local needs has become an overriding concern. Community-based health extension agents can effectively bridge those needs with academic health center resources and extend those resources to address the underlying social determinants of disease. PMID:20065282

Crisis pregnancy center websites: Information, misinformation and disinformation.

PubMed

Bryant, Amy G; Narasimhan, Subasri; Bryant-Comstock, Katelyn; Levi, Erika E

2014-12-01

Most states with 24-h waiting periods prior to abortion provide state resource directories to women seeking abortion. Our objective was to evaluate the information on abortion provided on the websites of crisis pregnancy centers listed in these resource directories. We performed a survey of the websites of crisis pregnancy centers referenced in state resource directories for pregnant women. We searched for these state-provided resource directories online. We contacted state Departments of Health and Human Services for a print copy when a directory could not be found online. The crisis pregnancy center websites were evaluated for the information provided on abortion. Standardized data collection tools were used. Descriptive statistics were generated. Resource directories of 12 states were procured. A total of 254 websites referring to 348 crisis pregnancy centers were identified. Overall, a total of 203/254 [80%, 95% confidence interval (CI) 75%-84%] of websites provided at least one false or misleading piece of information. The most common misleading or false information included on the websites were a declared link between abortion and mental health risks (122/254 sites; 48%, 95% CI 42%-54%), preterm birth (54/254; 21%, 95% CI 17%-27%), breast cancer (51/254; 20%, 95% CI 16%-25%) and future infertility (32/254; 13%, 95% CI 9%-17%). Most crisis pregnancy centers listed in state resource directories for pregnant women provide misleading or false information regarding the risks of abortion. States should not list agencies that provide inaccurate information as resources in their directories. Copyright © 2014 Elsevier Inc. All rights reserved.

Use of IKONOS Data for Mapping Cultural Resources of Stennis Space Center, Mississippi

NASA Technical Reports Server (NTRS)

Spruce, Joseph P.; Giardino, Marco

2002-01-01

Cultural resource surveys are important for compliance with Federal and State law. Stennis Space Center (SSC) in Mississippi is researching, developing, and validating remote sensing and Geographical Information System (GIS) methods for aiding cultural resource assessments on the center's own land. The suitability of IKONOS satellite imagery for georeferencing scanned historic maps is examined in this viewgraph presentation. IKONOS data can be used to map historic buildings and farmland in Gainsville, MS, and plan archaeological surveys.

What Is Osteogenesis Imperfecta?

MedlinePlus

... About Osteogenesis Imperfecta and Other Related Conditions: NIH Osteoporosis and Related Bone Diseases ~ National Resource Center 2 ... approved drug products. Last Reviewed 2014-11 NIH Osteoporosis and Related Bone Diseases ~ National Resource Center 2 ...

Language Development Resources for Bilingual Bicultural Education: An Aid to Primary Teachers of Mexican American Children.

ERIC Educational Resources Information Center

Dissemination and Assessment Center for Bilingual Education, Austin, TX.

This resource guide is designed as an aid to primary teachers of Mexican-American children. Besides including basic introductory material, the volume provides suggestions for parent involvement, classroom learning activity centers, and extensive resource materials. Classroom learning activity centers include: Art, Book, Communication, Discussion,…

75 FR 36356 - Announcement of Changes to the Membership of the Performance Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-25

... L. Holbrook, Department of Commerce Human Resources Operations Center (DOCHROC), Office of Executive Resources Operations, 14th and Constitution Avenue, NW., Room C-200, Washington, DC 20230, at (202) 482-5243... Classification, Department of Commerce Human Resources Operations Center. [FR Doc. 2010-15432 Filed 6-24-10; 8:45...

NREL: Renewable Resource Data Center - Geothermal Resource Models and Tools

Science.gov Websites

allow users to determine locations that are favorable to geothermal energy development. List of software Models and Tools The Renewable Resource Data Center (RReDC) features the following geothermal models and tools. Geothermal Prospector The Geothermal Prospector tool provides the information needed to

Creating a Resource Center for Homeschoolers: The Impact of Technology.

ERIC Educational Resources Information Center

Javid, Mahnaz A.

1998-01-01

Summarizes the findings of a two-month case study of Edmonds Cyberschool (Washington), a resource center for homeschoolers. The study focused on the impact of technology on students' learning as indicated in three areas: attitude toward technology, the use of technology, and value of technology versus other available resources. (Author/LRW)

Teaching for Success: Strengthening Child-Centered Classrooms. 8th Edition Resource Book.

ERIC Educational Resources Information Center

Fredenburg, Aldene, Ed.

This resource book, compiled by the Society for Developmental Education (SDE), focuses on the child-centered classroom, providing articles and suggestions for strengthening child-centered education. The seven sections of the book are as follows: (1) "For Discussion," including debates on class size and inclusion; (2) "Readiness/Kindergarten,"…

Building an Early Childhood Parent-Teacher Resource Center.

ERIC Educational Resources Information Center

Holloway, Mary A.

This manual is a guidebook to the development of the Project Enlightenment Parent-Teacher Resource Center and serves as a reference for the replication of this type of center in other communities. The manual consists of three chapters that are conceptualized as building blocks, because they are sequential, incremental, and independent. Block A…

34 CFR 464.4 - What regulations apply?

Code of Federal Regulations, 2010 CFR

2010-07-01

..., DEPARTMENT OF EDUCATION STATE LITERACY RESOURCE CENTERS PROGRAM General § 464.4 What regulations apply? The following regulations apply to the State Literacy Resource Centers Program: (a) The regulations in this part...

Load-Differential Imaging for Detection and Localization of Fatigue Cracks Using Lamb Waves (Preprint)

DTIC Science & Technology

2012-03-01

AFRL-RX-WP-TP-2012-0278 LOAD-DIFFERENTIAL IMAGING FOR DETECTION AND LOCALIZATION OF FATIGUE CRACKS USING LAMB WAVES (PREPRINT) X. Chen...OF FATIGUE CRACKS USING LAMB WAVES (PREPRINT) 5a. CONTRACT NUMBER FA8650-09-C-5206 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 62102F 6...Jan 2012. Preprint journal article to be submitted to NDT & E. This document contains color. 14. ABSTRACT Fatigue cracks are common and

Some Correlations between Plate Shatter and Fracture Toughness.

DTIC Science & Technology

1987-02-01

temperatures. In this manner, any test for plate cracking should be akin to a Charpy test, where a series of notched test bars are broken over a...cracking under ballistic impact. The PSTT test is analogous to the transition temperature in a Charpy impact test, or to the nil ductility transition (NDT...210 C to -730 C. Standard Charpy specimens were machined from the plates and subsequently precracked in fatigue to about 2.5 mm and dynamically tested

Materials Research at Stanford University, 1 July 1979 - 30 June 1980.

DTIC Science & Technology

1980-07-01

temperature, and this is characteristic of many dispersion strengthened alloys. The deformation microstructures are being studied using a Philips 400...34PVF Transducers for NDT," Proceedings of the ARPA/ AFML Review o? Progress in Quantitative NDE, July 1979. 6. R. A. Bergh, G. Kotler , and H. J. Shaw...characteri- zation of the premartensitic and martensitic transformations in TiNi than previously obtainable. Using a Philips EM400 equipped with a LaB

Exploration of Questions Regarding Modelling of Crack Growth Behaviour under Practical Combinations of Aircraft Spectra, Stress Levels and Materials

DTIC Science & Technology

2011-07-01

Conditions of Release and Disposal This document is the property of the Australian Government; the information it contains is released for defence...of high strength aluminium alloys and stress spectra associated with fatigue sensitive locations on typical RAAF aircraft. This report continues...growth, infrared NDT technologies and fibre optic corrosion detection devices. He joined DSTO in 2007 in the Air Vehicles Division and is currently

Millimeter Wave Holographical Inspection of Honeycomb Composites

NASA Technical Reports Server (NTRS)

Case, J. T.; Kharkovsky, S.; Zoughi, R.; Stefes, G.; Hepburn, Frank L.; Hepburn, Frank L.

2007-01-01

Multi-layered composite structures manufactured with honeycomb, foam or balsa wood cores are finding increasing utility in a variety of aerospace, transportation, and infrastructure applications. Due to the low conductivity and inhomogeneity associated with these composites standard nondestructive testing (NDT) methods are not always capable of inspecting their interior for various defects caused during the manufacturing process or as a result of in-service loading. On the contrary, microwave and millimeter wave NDT methods are well-suited for inspecting these structures since signals at these frequencies readily penetrate through these structures and reflect from different interior boundaries revealing the presence of a wide range of defects such as disbond, delamination, moisture and oil intrusion, impact damage, etc. Millimeter wave frequency spectrum spans 30 GHz - 300 GHz with corresponding wavelengths of 10 - 1 mm. Due to the inherent short wavelengths at these frequencies, one can produce high spatial resolution images of these composites either using real-antenna focused or synthetic-aperture focused methods. In addition, incorporation of swept-frequency in the latter method (i.e., holography) results in high-resolution three-dimensional images. This paper presents the basic steps behind producing such images at millimeter wave frequencies and the results of two honeycomb composite panels are demonstrated at Q-band (33-50 GHz). In addition, these results are compared to previous results using X-ray computed tomography.

Random Sequence for Optimal Low-Power Laser Generated Ultrasound

NASA Astrophysics Data System (ADS)

Vangi, D.; Virga, A.; Gulino, M. S.

2017-08-01

Low-power laser generated ultrasounds are lately gaining importance in the research world, thanks to the possibility of investigating a mechanical component structural integrity through a non-contact and Non-Destructive Testing (NDT) procedure. The ultrasounds are, however, very low in amplitude, making it necessary to use pre-processing and post-processing operations on the signals to detect them. The cross-correlation technique is used in this work, meaning that a random signal must be used as laser input. For this purpose, a highly random and simple-to-create code called T sequence, capable of enhancing the ultrasound detectability, is introduced (not previously available at the state of the art). Several important parameters which characterize the T sequence can influence the process: the number of pulses Npulses , the pulse duration δ and the distance between pulses dpulses . A Finite Element FE model of a 3 mm steel disk has been initially developed to analytically study the longitudinal ultrasound generation mechanism and the obtainable outputs. Later, experimental tests have shown that the T sequence is highly flexible for ultrasound detection purposes, making it optimal to use high Npulses and δ but low dpulses . In the end, apart from describing all phenomena that arise in the low-power laser generation process, the results of this study are also important for setting up an effective NDT procedure using this technology.

Mechanical characterization and comparison of energy storage and return prostheses.

PubMed

Rigney, Stacey M; Simmons, Anne; Kark, Lauren

2017-03-01

The suitability of finite element analysis (FEA) for standardizing the mechanical characterization of energy storage and return (ESAR) prostheses was investigated. A methodology consisting of both experimental and numerical analysis was proposed and trialed for the Vari-flex ® Modular TM , Flex-foot Cheetah and Cheetah Xtreme by Össur ® and a 1E90 Sprinter by Ottobock ® . Gait analysis was conducted to determine suitable orientation angles for non-destructive testing (NDT) of the ESAR prostheses followed by a quasi-static inverse FEA procedure within COMSOL Multiphysics ® , where the NDT conditions were replicated to determine the homogenized material properties of the prostheses. The prostheses' loading response under bodyweight for an 80kg person was then simulated, using both Eigenfrequency and time-dependent analysis. The apparent stiffness under bodyweight was determined to be 94.7, 48.6, 57.4 and 65.0Nmm -1 for the Vari-flex ® Modular TM , Flex-foot Cheetah, Cheetah Xtreme and 1E90 Sprinter, respectively. Both the energy stored and returned by the prostheses varied negatively with stiffness, yet the overall efficiency of the prostheses were similar, at 52.7, 52.0, 51.7 and 52.4% for the abovementioned prostheses. The proposed methodology allows the standardized assessment and comparison of ESAR prostheses without the confounding influences of subject-specific gait characteristics. Copyright © 2017 IPEM. Published by Elsevier Ltd. All rights reserved.

A visual approach to efficient analysis and quantification of ductile iron and reinforced sprayed concrete.

PubMed

Fritz, Laura; Hadwiger, Markus; Geier, Georg; Pittino, Gerhard; Gröller, M Eduard

2009-01-01

This paper describes advanced volume visualization and quantification for applications in non-destructive testing (NDT), which results in novel and highly effective interactive workflows for NDT practitioners. We employ a visual approach to explore and quantify the features of interest, based on transfer functions in the parameter spaces of specific application scenarios. Examples are the orientations of fibres or the roundness of particles. The applicability and effectiveness of our approach is illustrated using two specific scenarios of high practical relevance. First, we discuss the analysis of Steel Fibre Reinforced Sprayed Concrete (SFRSpC). We investigate the orientations of the enclosed steel fibres and their distribution, depending on the concrete's application direction. This is a crucial step in assessing the material's behavior under mechanical stress, which is still in its infancy and therefore a hot topic in the building industry. The second application scenario is the designation of the microstructure of ductile cast irons with respect to the contained graphite. This corresponds to the requirements of the ISO standard 945-1, which deals with 2D metallographic samples. We illustrate how the necessary analysis steps can be carried out much more efficiently using our system for 3D volumes. Overall, we show that a visual approach with custom transfer functions in specific application domains offers significant benefits and has the potential of greatly improving and optimizing the workflows of domain scientists and engineers.

A hybrid method combining the surface integral equation method and ray tracing for the numerical simulation of high frequency diffraction involved in ultrasonic NDT

NASA Astrophysics Data System (ADS)

Bonnet, M.; Collino, F.; Demaldent, E.; Imperiale, A.; Pesudo, L.

2018-05-01

Ultrasonic Non-Destructive Testing (US NDT) has become widely used in various fields of applications to probe media. Exploiting the surface measurements of the ultrasonic incident waves echoes after their propagation through the medium, it allows to detect potential defects (cracks and inhomogeneities) and characterize the medium. The understanding and interpretation of those experimental measurements is performed with the help of numerical modeling and simulations. However, classical numerical methods can become computationally very expensive for the simulation of wave propagation in the high frequency regime. On the other hand, asymptotic techniques are better suited to model high frequency scattering over large distances but nevertheless do not allow accurate simulation of complex diffraction phenomena. Thus, neither numerical nor asymptotic methods can individually solve high frequency diffraction problems in large media, as those involved in UNDT controls, both quickly and accurately, but their advantages and limitations are complementary. Here we propose a hybrid strategy coupling the surface integral equation method and the ray tracing method to simulate high frequency diffraction under speed and accuracy constraints. This strategy is general and applicable to simulate diffraction phenomena in acoustic or elastodynamic media. We provide its implementation and investigate its performances for the 2D acoustic diffraction problem. The main features of this hybrid method are described and results of 2D computational experiments discussed.

Routes for GMR-Sensor Design in Non-Destructive Testing

PubMed Central

Pelkner, Matthias; Neubauer, Andreas; Reimund, Verena; Kreutzbruck, Marc; Schütze, Andreas

2012-01-01

GMR sensors are widely used in many industrial segments such as information technology, automotive, automation and production, and safety applications. Each area requires an adaption of the sensor arrangement in terms of size adaption and alignment with respect to the field source involved. This paper deals with an analysis of geometric sensor parameters and the arrangement of GMR sensors providing a design roadmap for non-destructive testing (NDT) applications. For this purpose we use an analytical model simulating the magnetic flux leakage (MFL) distribution of surface breaking defects and investigate the flux leakage signal as a function of various sensor parameters. Our calculations show both the influence of sensor length and height and that when detecting the magnetic flux leakage of μm sized defects a gradiometer base line of 250 μm leads to a signal strength loss of less than 10% in comparison with a magnetometer response. To validate the simulation results we finally performed measurements with a GMR magnetometer sensor on a test plate with artificial μm-range cracks. The differences between simulation and measurement are below 6%. We report on the routes for a GMR gradiometer design as a basis for the fabrication of NDT-adapted sensor arrays. The results are also helpful for the use of GMR in other application when it comes to measure positions, lengths, angles or electrical currents.

Do infrared thermographers need a professional organization?

NASA Astrophysics Data System (ADS)

Peacock, G. Raymond

2008-03-01

In 2003 a group of interested Thermographers headed by Greg Stockton of Stockton Infrared Services and Lee Allen began an effort to develop a professional organization to serve the Thermography community. It was named ISPOT and resulted in a Constitution, committees, legal registration and a group of dues-paying members. However, it has waned and there appears little organization left and more than a few people disappointed. Clearly there was a need. There still seems to be a need and issues in the education, continuing education and certification of Thermographer skills as well as standards for development of procedures. Applications in the Non Destructive Testing (NDT) field seem to have grown beyond the scope of present certification recommendations and promise to expand even faster. Who speaks objectively for the minimal training and in-service experience required to make a Thermographers fully qualified in areas outside NDT? How does a Thermographer extend his skill set into the newer fields of Building Thermography, Pest Control, Mold Remediation and the Next New Thing? What of the needs for purchasers of thermographic services? How can they judge the capabilities of individuals or organizations hired to perform services? What requirements exist for trained Thermographers to maintain their skills? Perhaps we can start to define some guidelines for an organization to meet the needs of the individuals, the trainers, the equipment suppliers and the users and purchasers of thermographic services.

Long and spatially variable Neolithic Demographic Transition in the North American Southwest

PubMed Central

Kohler, Timothy A.; Reese, Kelsey M.

2014-01-01

In many places of the world, a Neolithic Demographic Transition (NDT) is visible as a several-hundred-year period of increased birth rates coupled with stable mortality rates, resulting in dramatic population growth that is eventually curtailed by increased mortality. Similar processes can be reconstructed in particular detail for the North American Southwest, revealing an anomalously long and spatially variable NDT. Irrigation-dependent societies experienced relatively low birth rates but were quick to achieve a high degree of sociopolitical complexity, whereas societies dependent on dry or rainfed farming experienced higher birth rates but less initial sociopolitical complexity. Low birth rates after A.D. 1200 mark the beginning of the decline of the Hohokam. Overall in the Southwest, birth rates increased slowly from 1100 B.C. to A.D. 500, and remained at high levels with some fluctuation until decreasing rapidly beginning A.D. 1300. Life expectancy at 15 increased slowly from 900 B.C. to A.D. 700, and then increased rapidly for 200 y before fluctuating and then declining after A.D. 1400. Life expectancy at birth, on the other hand, generally declined from 1100 B.C. to A.D. 1100/1200, before rebounding. Farmers took two millennia (∼1100 B.C. to ∼A.D. 1000) to reach the carrying capacity of the agricultural niche in the Southwest. PMID:24982134

Millimeter Wave Holographical Inspection of Honeycomb Composites

NASA Astrophysics Data System (ADS)

Case, J. T.; Kharkovsky, S.; Zoughi, R.; Steffes, G.; Hepburn, F. L.

2008-02-01

Multi-layered composite structures manufactured with honeycomb, foam, or balsa wood cores are finding increasing utility in a variety of aerospace, transportation, and infrastructure applications. Due to the low conductivity and inhomogeneity associated with these composites, standard nondestructive testing (NDT) methods are not always capable of inspecting their interior for various defects caused during the manufacturing process or as a result of in-service loading. On the contrary, microwave and millimeter wave NDT methods are well-suited for inspecting these structures since signals at these frequencies readily penetrate through these structures and reflect from different interior boundaries revealing the presence of a wide range of defects such as isband, delamination, moisture and oil intrusion, impact damage, etc. Millimeter wave frequency spectrum spans 30 GHz-300 GHz with corresponding wavelengths of 10-1 mm. Due to the inherent short wavelengths at these frequencies, one can produce high spatial resolution images of these composites either using real-antenna focused or synthetic-aperture focused methods. In addition, incorporation of swept-frequency in the latter method (i.e., holography) results in high-resolution three-dimensional images. This paper presents the basic steps behind producing such images at millimeter wave frequencies and the results of two honeycomb composite panels are demonstrated at Q-band (33-50 GHz). In addition, these results are compared to previous results using X-ray computed tomography.

MSFC April 2016 Resource Reel

NASA Image and Video Library

2016-04-27

Name/Title of Video: Marshall Space Flight Center Media Resource Reel 2016 Description: Edited b-roll video of NASA's Marshall Space Flight Center in Huntsville, Ala., and of various projects and programs located at or associated with the center. For more information and more detailed footage, please contact the center's Public & Employee Communications Office. Graphic Information: PAO Name:Jennifer Stanfield Phone Number:256-544-0034 Email Address: jennifer.stanfield@nasa.gov

Oversight on NIOSH: Educational Resource Centers. Hearing before the Subcommittee on Education and Labor. House of Representatives, Ninety-Ninth Congress, First Session, June 18, 1985.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Education and Labor.

Educational Resource Centers (ERC), which are funded by the National Institute for Occupational Safety and Health, are considered in these hearings. Attention is directed to how four centers are fulfilling their mission, special programs at the centers, and possible future projects. ERCs, which are located at 15 regional public and private…

NASA Center for Computational Sciences: History and Resources

NASA Technical Reports Server (NTRS)

2000-01-01

The Nasa Center for Computational Sciences (NCCS) has been a leading capacity computing facility, providing a production environment and support resources to address the challenges facing the Earth and space sciences research community.

[Adjusted Clinical Groups Method (ACG) to allocate resources according to the disease burden of each health center].

PubMed

Santelices C, Emilio; Muñoz P, Fernando; Muñiz, Patricio; Rojas, José

2016-03-01

Health care must be provided with strong primary health care models, emphasizing prevention and a continued, integrated and interdisciplinary care. Tools should be used to allow a better planning and more efficient use of resources. To assess risk adjustment methodologies, such as the Adjusted Clinical Groups (ACG) developed by The Johns Hopkins University, to allow the identification of chronic condition patterns and allocate resources accordingly. We report the results obtained applying the ACG methodology in primary care systems of 22 counties for three chronic diseases, namely Diabetes Mellitus, Hypertension and Heart Failure. The outcomes show a great variability in the prevalence of these conditions in the different health centers. There is also a great diversity in the use of resources for a given condition in the different health care centers. This methodology should contribute to a better distribution of health care resources, which should be based on the disease burden of each health care center.

Application-oriented integrated control center (AICC) for heterogeneous optical networks

NASA Astrophysics Data System (ADS)

Zhao, Yongli; Zhang, Jie; Cao, Xuping; Wang, Dajiang; Wu, Koubo; Cai, Yinxiang; Gu, Wanyi

2011-12-01

Various broad bandwidth services have being swallowing the bandwidth resource of optical networks, such as the data center application and cloud computation. There are still some challenges for future optical networks although the available bandwidth is increasing with the development of transmission technologies. The relationship between upper application layer and lower network resource layer is necessary to be researched further. In order to improve the efficiency of network resources and capability of service provisioning, heterogeneous optical networks resource can be abstracted as unified Application Programming Interfaces (APIs) which can be open to various upper applications through Application-oriented Integrated Control Center (AICC) proposed in the paper. A novel Openflow-based unified control architecture is proposed for the optimization of cross layer resources. Numeric results show good performance of AICC through simulation experiments.

Strategizing for the Future: Evolving Cultural Resource Centers in Higher Education

ERIC Educational Resources Information Center

Shek, Yen Ling

2013-01-01

Cultural resource centers have been an ongoing and integral component to creating a more welcoming campus climate for Students of Color since its establishment in the 1960s. While the racial dynamics may have changed, many of the challenges Students of Color faced on predominantly White campuses have not. Interestingly, cultural resource centers…

A Computerized Cataloging System for an Outdoor Program Library or Resource Center.

ERIC Educational Resources Information Center

Watters, Ron

The Outdoor Resource Library Cataloging System is a computer software program designed primarily for outdoor programs with small to medium-sized resource centers. The software is free to nonprofit organizations and is available from the Idaho State University Outdoor Program. The software is used to construct a database of library materials, which…

Migrant Child Education. Learning Activities Direct Instruction K-8.

ERIC Educational Resources Information Center

Wheelock, Warren H., Ed.

The two major parts of a publication resulting from the 14th annual Arizona Migrant Child Teacher and Aide Institute discuss learning centers and resource units and provide four K-3 resource units, and three resource units for grades 4-8. Institute participants from 1983 and earlier years are listed. The discussion of learning centers as…

The Status and Prospects of Library/Learning Resource Centers at Michigan Community Colleges.

ERIC Educational Resources Information Center

Platte, James P., Ed.

In 1986, a study was conducted to examine the status of the libraries and learning resource centers (LRC's) at Michigan community colleges. A questionnaire was used to gather background on the colleges, and information on the types and scope of services provided by the libraries/LRC's, their organizational structure, resource allocation, and key…

76 FR 64073 - Announcement of Changes to the Membership of the Performance Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

...: Ronda L. Holbrook, U.S. Department of Commerce, Human Resources Operations Center (DOCHROC), Office of Executive Resources Operations, 14th and Constitution Avenue, NW., Room 7419, Washington, DC 20230, at (202... Commerce Human Resources Operations Center. [FR Doc. 2011-26739 Filed 10-14-11; 8:45 am] BILLING CODE 3510...

Afro-American Curriculum Office and Resource Center. ESEA Title III, Toledo Public Schools, Toledo, Ohio.

ERIC Educational Resources Information Center

Meinke, Dean L.; Glick, I. David

The Afro-American Curriculum Office and Resource Center, funded under Title III of the 1965 Elementary Secondary Education Act, had the general purpose of upgrading the instructional level and the material resources concerning the black American's contributions to this country's past and present life. Although the project was directly administered…

The Resource Centre at Madeley Court School, Salop: A Study of its Organisation and Operation.

ERIC Educational Resources Information Center

Waite, Charlotte E.

The library resource center of a new school in Wales is described and evaluated. First there is an overview of the school itself: social environment, school aims, organization, individual and independent work, staffing, and growth of the school. Then various facets of the resource center are discussed: aims, design and layout; departmental…

Healthy Smile for Your Baby

MedlinePlus

... Baby Healthy. Washington, DC: National Maternal and Child Oral Health Resource Center. A Healthy Smile for Your Baby: ... Healthy © 2009 by the National Maternal and Child Oral Health Resource Center, Georgetown University. Fourth printing. This publication ...

Bathing an infant

MedlinePlus

National Resource Center for Health and Safety in Child Care and Early Education. Standard 2.2.0.4: Supervision near ... National Resource Center for Health and Safety in Child Care and Early Education; 2011. cfoc.nrckids.org/CFOC/Database/2. ...

National Maternal and Child Oral Health Resource Center

MedlinePlus

... the Organizations Database Center for Oral Health Systems Integration and Improvement (COHSII) COHSII is a consortium promoting ... to e-mail lists Featured Resources Consensus Statement Integration Framework Bright Futures Pocket Guide Consumer Materials Special ...

A Guide to the Data Resources of the Henry A. Murray Research Center of Radcliffe College: A Center for the Study of Lives [and] Index to [the] Guide.

ERIC Educational Resources Information Center

Radcliffe Coll., Cambridge, MA. Henry A. Murray Research Center.

The first of two volumes provides information about data resources available at the Henry A. Murray Research Center of Radcliffe College, a multidisciplinary research center that is a national repository for social and behavioral science data on human development and social change; topics of special concern to women are collection priorities. The…

30 CFR 75.812-2 - High-voltage power centers and transformers; record of examination.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false High-voltage power centers and transformers; record of examination. 75.812-2 Section 75.812-2 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... High-Voltage Distribution § 75.812-2 High-voltage power centers and transformers; record of examination...

30 CFR 75.812-2 - High-voltage power centers and transformers; record of examination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false High-voltage power centers and transformers; record of examination. 75.812-2 Section 75.812-2 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... High-Voltage Distribution § 75.812-2 High-voltage power centers and transformers; record of examination...

30 CFR 75.812-2 - High-voltage power centers and transformers; record of examination.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false High-voltage power centers and transformers; record of examination. 75.812-2 Section 75.812-2 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... High-Voltage Distribution § 75.812-2 High-voltage power centers and transformers; record of examination...

30 CFR 75.812-2 - High-voltage power centers and transformers; record of examination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false High-voltage power centers and transformers; record of examination. 75.812-2 Section 75.812-2 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... High-Voltage Distribution § 75.812-2 High-voltage power centers and transformers; record of examination...

30 CFR 75.812-2 - High-voltage power centers and transformers; record of examination.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false High-voltage power centers and transformers; record of examination. 75.812-2 Section 75.812-2 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... High-Voltage Distribution § 75.812-2 High-voltage power centers and transformers; record of examination...

Microgravity

NASA Image and Video Library

2001-04-25

The arnual conference for the Educator Resource Center Network (ERCN) Coordinators was held at Glenn Research Center at Lewis Field in Cleveland, Ohio. The conference included participants from NASA's Educator Resource Centers located throughout the country. The Microgravity Science Division at Glenn sponsored a Microgravity Day for all the conference participants. This image is from a digital still camera; higher resolution is not available.

Turnover intentions in a call center: The role of emotional dissonance, job resources, and job satisfaction.

PubMed

Zito, Margherita; Emanuel, Federica; Molino, Monica; Cortese, Claudio Giovanni; Ghislieri, Chiara; Colombo, Lara

2018-01-01

Turnover intentions refer to employees' intent to leave the organization and, within call centers, it can be influenced by factors such as relational variables or the perception of the quality of working life, which can be affected by emotional dissonance. This specific job demand to express emotions not felt is peculiar in call centers, and can influence job satisfaction and turnover intentions, a crucial problem among these working contexts. This study aims to detect, within the theoretical framework of the Job Demands-Resources Model, the role of emotional dissonance (job demand), and two resources, job autonomy and supervisors' support, in the perception of job satisfaction and turnover intentions among an Italian call center. The study involved 318 call center agents of an Italian Telecommunication Company. Data analysis first performed descriptive statistics through SPSS 22. A path analysis was then performed through LISREL 8.72 and tested both direct and indirect effects. Results suggest the role of resources in fostering job satisfaction and in decreasing turnover intentions. Emotional dissonance reveals a negative relation with job satisfaction and a positive relation with turnover. Moreover, job satisfaction is negatively related with turnover and mediates the relationship between job resources and turnover. This study contributes to extend the knowledge about the variables influencing turnover intentions, a crucial problem among call centers. Moreover, the study identifies theoretical considerations and practical implications to promote well-being among call center employees. To foster job satisfaction and reduce turnover intentions, in fact, it is important to make resources available, but also to offer specific training programs to make employees and supervisors aware about the consequences of emotional dissonance.

Turnover intentions in a call center: The role of emotional dissonance, job resources, and job satisfaction

PubMed Central

Zito, Margherita; Molino, Monica; Cortese, Claudio Giovanni; Ghislieri, Chiara; Colombo, Lara

2018-01-01

Background Turnover intentions refer to employees’ intent to leave the organization and, within call centers, it can be influenced by factors such as relational variables or the perception of the quality of working life, which can be affected by emotional dissonance. This specific job demand to express emotions not felt is peculiar in call centers, and can influence job satisfaction and turnover intentions, a crucial problem among these working contexts. This study aims to detect, within the theoretical framework of the Job Demands-Resources Model, the role of emotional dissonance (job demand), and two resources, job autonomy and supervisors’ support, in the perception of job satisfaction and turnover intentions among an Italian call center. Method The study involved 318 call center agents of an Italian Telecommunication Company. Data analysis first performed descriptive statistics through SPSS 22. A path analysis was then performed through LISREL 8.72 and tested both direct and indirect effects. Results Results suggest the role of resources in fostering job satisfaction and in decreasing turnover intentions. Emotional dissonance reveals a negative relation with job satisfaction and a positive relation with turnover. Moreover, job satisfaction is negatively related with turnover and mediates the relationship between job resources and turnover. Conclusion This study contributes to extend the knowledge about the variables influencing turnover intentions, a crucial problem among call centers. Moreover, the study identifies theoretical considerations and practical implications to promote well-being among call center employees. To foster job satisfaction and reduce turnover intentions, in fact, it is important to make resources available, but also to offer specific training programs to make employees and supervisors aware about the consequences of emotional dissonance. PMID:29401507

Designing and implementing a parenting resource center for pregnant teens.

PubMed

Broussard, Anne B; Broussard, Brenda S

2009-01-01

The Resource Center for Young Parents-To-Be is a longstanding and successful grant-funded project that was initiated as a response to an identified community need. Senior-level baccalaureate nursing students and their maternity-nursing instructors are responsible for staffing the resource center's weekly sessions, which take place at a public school site for pregnant adolescents. Childbirth educators interested in working with this population could assist in replicating this exemplary clinical project in order to provide prenatal education to this vulnerable and hard-to-reach group.

NINR Centers of Excellence: A logic model for sustainability, leveraging resources and collaboration to accelerate cross-disciplinary science

PubMed Central

Dorsey, Susan G.; Schiffman, Rachel; Redeker, Nancy S.; Heitkemper, Margaret; McCloskey, Donna Jo; Weglicki, Linda S.; Grady, Patricia A.

2014-01-01

The NINR Centers of Excellence program is a catalyst enabling institutions to develop infrastructure and administrative support for creating cross-disciplinary teams that bring multiple strategies and expertise to bear on common areas of science. Centers are increasingly collaborative with campus partners and reflect an integrated team approach to advance science and promote the development of scientists in these areas. The purpose of this paper is to present a NINR Logic Model for Center Sustainability. The components of the logic model were derived from the presentations and robust discussions at the 2013 NINR Center Directors’ meeting focused on best practices for leveraging resources and collaboration as methods to promote center sustainability. Collaboration through development and implementation of cross-disciplinary research teams is critical to accelerate the generation of new knowledge for solving fundamental health problems. Sustainability of centers as a long-term outcome beyond the initial funding can be enhanced by thoughtful planning of inputs, activities, and leveraging resources across multiple levels. PMID:25085328

Exercise and Activity: Key Elements in the Management of OI

MedlinePlus

... receive a copy of this publication, visit: NIH Osteoporosis and Related Bone Diseases ~ National Resource Center Website: ... No. 15-7917 Last Reviewed 2015-05 NIH Osteoporosis and Related Bone Diseases ~ National Resource Center 2 ...

Geriatric resources in acute care hospitals and trauma centers: a scarce commodity.

PubMed

Maxwell, Cathy A; Mion, Lorraine C; Minnick, Ann

2013-12-01

The number of older adults admitted to acute care hospitals with traumatic injury is rising. The purpose of this study was to examine the location of five prominent geriatric resource programs in U.S. acute care hospitals and trauma centers (N = 4,865). As of 2010, 5.8% of all U.S. hospitals had at least one of these programs. Only 8.8% of trauma centers were served by at least one program; the majorities were in level I trauma centers. Slow adoption of geriatric resource programs in hospitals may be due to lack of champions who will advocate for these programs, lack of evidence of their impact on outcomes, or lack of a business plan to support adoption. Future studies should focus on the benefits of geriatric resource programs from patients' perspectives, as well as from business case and outcomes perspectives. Copyright 2013, SLACK Incorporated.

Providing Curriculum Support in the School Library Media Center: Resource Alignment, or How To Eat an Elephant.

ERIC Educational Resources Information Center

Lowe, Karen

2003-01-01

Discusses the process of weeding, updating, and building a school library media collection that supports the state curriculum. Explains resource alignment, a process for using the shelf list as a tool to analyze and align media center resources to state curricula, and describes a five-year plan and its usefulness for additional funding. (LRW)

Black light photography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lisin, M.A.

1996-11-01

Black light photography of fluorescent penetrant and wet fluorescent magnetic particle indications can yield spectacular and useful results. The technique provides a lasting record of a flaw`s severity and location, as well as its physical relation to other components and important features. The procedures are easily learned and do not require sophisticated apparatus. In fact, equipment costs can often be justified on the basis of a single application. Using the techniques described in this article, black light photography can be a cost-effective, informative NDT tool.

CSP-IEEE Instrumentation and Measurement Technology Conference 2016 (IEEE 12MTC 2016)

DTIC Science & Technology

2016-08-22

Advanced Measurement and Instrumentation for NDT&E • Instrumentation and measurement for improving quality, reliability and safety : new...the Conference is in Asia , therefore China , Taiwan , Malaysia , and India were on the list. As for the acceptance rat ion , Austria , Italy, UK...15 69.4% Brazil 14 7 66.7% USA 15 6 71.4% Malaysia 12 10 54 .5% Germany 9 3 75.0% United Kingdom 10 2 83 .3% Canada 8 2 80.0% Austria 10 0

Effect of Thermomechanical Treatment on the Microstructure and Mechanical Properties of AISI 52100 Steel.

DTIC Science & Technology

1981-06-01

ofJue18 AISI 52100 Steel S. PERFOMING 04G. REOR "idMeRf 7. AUTHOR(e, A. CONTRACT ON GRANT NUmetta~s) Clarence W. Schultz S. P9m1FOMuNGw ORGMSIZATION...SUPPLEMENTARY NOTCS to. 14 IV WORDS (Cominu. -s bree coer It arneemp aE~ndt bay .4*l ONber) 52100 Steel , thermomechanical processing; heat treatment...AISI 52100 steel have been investigated using a canbination of optical and transmission electron microscopy in conjunction with standard mechanical

U. S. Atlantic Fleet, Task Force 87, Operation Plan No. 1-44

DTIC Science & Technology

1944-08-01

support to Allied Forces in NORMANDY by occupying the maximum enemy strength in SOUTHERN FRANCE . Th|Sground forces are both American and French , and...LS I (M) and LSP, Currency^ French currency (both Bank of France and Allied supplemental francsTwill be used in captured areas at an exchange rate...Morocco, Bank of Algeria, Bank of Tunisia and Bank of French West Africa will ndt be legal tender in France , Disbursing Officers may accept the above

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liebetrau, A.M.

Work is underway at Pacific Northwest Laboratory (PNL) to improve the probabilistic analysis used to model pressurized thermal shock (PTS) incidents in reactor pressure vessels, and, further, to incorporate these improvements into the existing Vessel Integrity Simulation Analysis (VISA) code. Two topics related to work on input distributions in VISA are discussed in this paper. The first involves the treatment of flaw size distributions and the second concerns errors in the parameters in the (Guthrie) equation which is used to compute ..delta..RT/sub NDT/, the shift in reference temperature for nil ductility transition.

Preparation Torque Limit for Composites Joined with Mechanical Fasteners

NASA Technical Reports Server (NTRS)

Thomas, Frank P.; Yi, Zhao

2005-01-01

Current design guidelines for determining torque ranges for composites are based on tests and analysis from isotropic materials. Properties of composites are not taken into account. No design criteria based upon a systematic analytical and test analyses is available. This paper is to study the maximum torque load a composite component could carry prior to any failure. Specifically, the torque-tension tests are conducted. NDT techniques including acoustic emission, thermography and photomicroscopy are also utilized to characterize the damage modes.

An Evaluation of the Effective Block Approach Using P-3C and F-111 Crack Growth Data

DTIC Science & Technology

2008-09-01

the end of 2006 where his research interests included, modelling of fatigue crack growth, infrared NDT technologies and fibre optic corrosion...2006). It was claimed that the growth of these cracks in structures made of 7050 aluminium alloy could not be adequately predicted using classical...the crack growth behaviour of 7050 aluminium alloy subjected to the service load of the F/A-18 fighter planes. To make the matter worse, the

A Novel 24 Ghz One-Shot Rapid and Portable Microwave Imaging System (Camera)

NASA Technical Reports Server (NTRS)

Ghasr, M.T.; Abou-Khousa, M.A.; Kharkovsky, S.; Zoughi, R.; Pommerenke, D.

2008-01-01

A novel 2D microwave imaging system at 24 GHz based on MST techniques. Enhanced sensitivity and SNR by utilizing PIN diode-loaded resonant slots. Specific slot and array design to increase transmission and reduce cross -coupling. Real-time imaging at a rate in excess of 30 images per second. Reflection as well transmission mode capabilities. Utility and application for electric field distribution mapping related to: Nondestructive Testing (NDT), imaging applications (SAR, Holography), and antenna pattern measurements.

Geometrical optimization of sensors for eddy currents nondestructive testing and evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thollon, F.; Burais, N.

1995-05-01

Design of Non Destructive Testing (NDT) and Non Destructive Evaluation (NDE) sensors is possible by solving Maxwell`s relations with FEM or BIM. But the large number of geometrical and electrical parameters of sensor and tested material implies many results that don`t give necessarily a well adapted sensor. The authors have used a genetic algorithm for automatic optimization. After having tested this algorithm with analytical solution of Maxwell`s relations for cladding thickness measurement, the method has been implemented in finite element package.

Eddy current modeling in linear and nonlinear multifilamentary composite materials

NASA Astrophysics Data System (ADS)

Menana, Hocine; Farhat, Mohamad; Hinaje, Melika; Berger, Kevin; Douine, Bruno; Lévêque, Jean

2018-04-01

In this work, a numerical model is developed for a rapid computation of eddy currents in composite materials, adaptable for both carbon fiber reinforced polymers (CFRPs) for NDT applications and multifilamentary high temperature superconductive (HTS) tapes for AC loss evaluation. The proposed model is based on an integro-differential formulation in terms of the electric vector potential in the frequency domain. The high anisotropy and the nonlinearity of the considered materials are easily handled in the frequency domain.

Water Resources Division training catalog

USGS Publications Warehouse

Hotchkiss, W.R.; Foxhoven, L.A.

1984-01-01

The National Training Center provides technical and management sessions nesessary for the conductance of the U.S. Geological Survey 's training programs. This catalog describes the facilities and staff at the Lakewood Training Center and describes Water Resources Division training courses available through the center. In addition, the catalog describes the procedures for gaining admission, formulas for calculating fees, and discussion of course evaluations. (USGS)

Water Resources Research Center

Science.gov Websites

Untitled Document  Search Welcome to the University of Hawai'i at Manoa Water Resources Research Center and contracts. Our Focus is to: Serve as the Water Research Center in Hawaii and in this capacity to coordinate and conduct research to identify, characterize, and quantify water-related problems in the state

Library/Media Centers in U.S. Public Schools: Growth, Staffing, and Resources. Full Report

ERIC Educational Resources Information Center

Tuck, Kathy D.; Holmes, Dwight R.

2016-01-01

At the request of New Business Item: 89 (NBI: 89) adopted at the 2015 NEA Representative Assembly, this study examines the extent to which students have access to public school library/media centers with qualified staff and up-to-date resources. The study explores trends in library/media center openings and closings as well as staffing patterns…

Meeting Employers' Needs: How One-Stop Centers Can Attract Business Customers. Business Assistance Note #6.

ERIC Educational Resources Information Center

Bergman, Terri

The U.S. Department of Labor's One-Stop Career Center initiative is part of the movement of governments to increase the quality and efficiency of their services. One-stop centers bring together public and private resources to meet individuals' and employers' human resource development and labor market needs. In order to meet employers' needs,…

Learning Resource Center at the Baraboo Campus of the University of Wisconsin Center System.

ERIC Educational Resources Information Center

Umhoefer, Aural

The Learning Resource Center (LRC) at the Baraboo campus of the University of Wisconsin was designed to be an integral part of the teaching program, and to embody the multimedia approach to individual self-paced learning by using the most appropriate medium or combination of media for a given instructional situation. The collection includes books,…

Management systems, patient quality improvement, resource availability, and substance abuse treatment quality.

PubMed

Fields, Dail; Roman, Paul M; Blum, Terry C

2012-06-01

To examine the relationships among general management systems, patient-focused quality management/continuous process improvement (TQM/CPI) processes, resource availability, and multiple dimensions of substance use disorder (SUD) treatment. Data are from a nationally representative sample of 221 SUD treatment centers through the National Treatment Center Study (NTCS). The design was a cross-sectional field study using latent variable structural equation models. The key variables are management practices, TQM/continuous quality improvement (CQI) practices, resource availability, and treatment center performance. Interviews and questionnaires provided data from treatment center administrative directors and clinical directors in 2007-2008. Patient-focused TQM/CQI practices fully mediated the relationship between internal management practices and performance. The effects of TQM/CQI on performance are significantly larger for treatment centers with higher levels of staff per patient. Internal management practices may create a setting that supports implementation of specific patient-focused practices and protocols inherent to TQM/CQI processes. However, the positive effects of internal management practices on treatment center performance occur through use of specific patient-focused TQM/CPI practices and have more impact when greater amounts of supporting resources are present. © Health Research and Educational Trust.

Management Systems, Patient Quality Improvement, Resource Availability, and Substance Abuse Treatment Quality

PubMed Central

Fields, Dail; Roman, Paul M; Blum, Terry C

2012-01-01

Objective To examine the relationships among general management systems, patient-focused quality management/continuous process improvement (TQM/CPI) processes, resource availability, and multiple dimensions of substance use disorder (SUD) treatment. Data Sources/Study Setting Data are from a nationally representative sample of 221 SUD treatment centers through the National Treatment Center Study (NTCS). Study Design The design was a cross-sectional field study using latent variable structural equation models. The key variables are management practices, TQM/continuous quality improvement (CQI) practices, resource availability, and treatment center performance. Data Collection Interviews and questionnaires provided data from treatment center administrative directors and clinical directors in 2007–2008. Principal Findings Patient-focused TQM/CQI practices fully mediated the relationship between internal management practices and performance. The effects of TQM/CQI on performance are significantly larger for treatment centers with higher levels of staff per patient. Conclusions Internal management practices may create a setting that supports implementation of specific patient-focused practices and protocols inherent to TQM/CQI processes. However, the positive effects of internal management practices on treatment center performance occur through use of specific patient-focused TQM/CPI practices and have more impact when greater amounts of supporting resources are present. PMID:22098342

45 CFR 96.125 - Primary prevention.

Code of Federal Regulations, 2013 CFR

2013-10-01

... following: (i) Clearinghouse/information resource center(s); (ii) Resource directories; (iii) Media... under this strategy aim to affect critical life and social skills, including decision-making, refusal skills, critical analysis (e.g. of media messages) and systematic judgment abilities. Examples of...

45 CFR 96.125 - Primary prevention.

Code of Federal Regulations, 2011 CFR

2011-10-01

... following: (i) Clearinghouse/information resource center(s); (ii) Resource directories; (iii) Media... under this strategy aim to affect critical life and social skills, including decision-making, refusal skills, critical analysis (e.g. of media messages) and systematic judgment abilities. Examples of...

45 CFR 96.125 - Primary prevention.

Code of Federal Regulations, 2014 CFR

2014-10-01

... following: (i) Clearinghouse/information resource center(s); (ii) Resource directories; (iii) Media... under this strategy aim to affect critical life and social skills, including decision-making, refusal skills, critical analysis (e.g. of media messages) and systematic judgment abilities. Examples of...

45 CFR 96.125 - Primary prevention.

Code of Federal Regulations, 2012 CFR

2012-10-01

... following: (i) Clearinghouse/information resource center(s); (ii) Resource directories; (iii) Media... under this strategy aim to affect critical life and social skills, including decision-making, refusal skills, critical analysis (e.g. of media messages) and systematic judgment abilities. Examples of...

Alaska Department of Natural Resources

Science.gov Websites

Questions Public Information Center Contacts/Office Directory Jobs/Volunteer Opportunities Boards and Recreation Support Services Division Offices Commissioner's Office Public Information Center Alaska State Resources / Commissioner's Office DNR FAQ - Frequently Asked Questions Maps & Geographic Information

Books, children, dogs, artists: library programs for the entire family.

PubMed

Haver, Mary Katherine

2014-01-01

The promotion of library resources and services is a continuous process for all libraries, especially hospital family resource center libraries. Like public libraries, a family resource center can utilize programs as a pathway for connecting with and developing awareness of library resources and services available to patient families. This column describes the programs currently offered for All Children's Hospital Johns Hopkins Medicine patient families, marketing initiatives to promote these programs, and utilization of grant funding to supplement a program.

NASA Langley Teacher Resource Center at the Virginia Air and Space Center

NASA Technical Reports Server (NTRS)

Maher, Kim L.

1999-01-01

Nation's education goals through expanding and enhancing the scientific an technological competence of students and educators. To help disseminate NASA instructional materials and educational information, NASA's Education Division has established the Educator Resource Center Network. Through this network (ERCN), educators are provided the opportunity to receive free instructional information, materials, consultation, and training workshops on NASA educational products. The Office of Education at NASA Langley Research Center offers an extension of its Precollege Education program by supporting the NASA LARC Educator Resource Center at the Virginia Air & Space Center, the official visitor center for NASA LARC. This facility is the principal distribution point for educators in the five state service region that includes Virginia, West Virginia, Kentucky, North Carolina and South Carolina. The primary goal, to provide expertise and facilities to help educators access and utilize science, mathematics, and technology instructional products aligned with national standards and appropriate state frameworks and based on NASA's unique mission and results, has been accomplished. This ERC had 15,200 contacts and disseminated over 190,000 instructional items during the period of performance. In addition the manager attended 35 conferences, workshops, and educational meetings as an GR, presenter, or participant. The objective to demonstrate and facilitate the use of educational technologies has been accomplished through the following: The ERC's web page has been developed as a cyber-gateway to a multitude of NASA and other educational resources as well as to Our own database of current resource materials. NASA CORE CD-ROM technology is regularly demonstrated and promoted using the center's computers. NASA TV is available, demonstrated to educators, and used to facilitate the downlinking of NASA educational programming.

Victim assistance - resources

MedlinePlus

Rape - resources; Resources - rape ... The following organizations are good resources for information on domestic violence and rape : Administration for Children and Families -- www.acf.hhs.gov The National Center for Victims ...

A Reading Resource Center: Why and How

ERIC Educational Resources Information Center

Minkoff, Henry

1974-01-01

Hunter College has set up a Reading Resource Center where students receive individualized help in specific problem areas not covered in their reading classes and where teachers can find materials either for their own edification or for use in the classroom. (Author)

Electronic Commerce Resource Centers. An Industry--University Partnership.

ERIC Educational Resources Information Center

Gulledge, Thomas R.; Sommer, Rainer; Tarimcilar, M. Murat

1999-01-01

Electronic Commerce Resource Centers focus on transferring emerging technologies to small businesses through university/industry partnerships. Successful implementation hinges on a strategic operating plan, creation of measurable value for customers, investment in customer-targeted training, and measurement of performance outputs. (SK)

78 FR 55731 - Health Workforce Research Center Cooperative Agreement Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-11

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Health Workforce Research Center Cooperative Agreement Program AGENCY: Health Resources and Services Administration.... These proposed concentration areas were selected as areas of critical importance to health workforce...

Amarillo National Resource Center for Plutonium quarterly technical progress report, August 1, 1997--October 31, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report summarizes activities of the Amarillo National Resource Center for Plutonium during the quarter. The report describes the Electronic Resource Library; DOE support activities; current and future environmental health and safety programs; pollution prevention and pollution avoidance; communication, education, training, and community involvement programs; and nuclear and other material studies, including plutonium storage and disposition studies.

Are the resources adoptive for conducting team-based diabetes management clinics? An explorative study at primary health care centers in Muscat, Oman.

PubMed

Al-Alawi, Kamila; Johansson, Helene; Al Mandhari, Ahmed; Norberg, Margareta

2018-05-08

AimThe aim of this study is to explore the perceptions among primary health center staff concerning competencies, values, skills and resources related to team-based diabetes management and to describe the availability of needed resources for team-based approaches. The diabetes epidemic challenges services available at primary health care centers in the Middle East. Therefore, there is a demand for evaluation of the available resources and team-based diabetes management in relation to the National Diabetes Management Guidelines. A cross-sectional study was conducted with 26 public primary health care centers in Muscat, the capital of Oman. Data were collected from manual and electronic resources as well as a questionnaire that was distributed to the physician-in-charge and diabetes management team members.FindingsThe study revealed significant differences between professional groups regarding how they perceived their own competencies, values and skills as well as available resources related to team-based diabetes management. The perceived competencies were high among all professions. The perceived team-related values and skills were also generally high but with overall lower recordings among the nurses. This pattern, along with the fact that very few nurses have specialized qualifications, is a barrier to providing team-based diabetes management. Participants indicated that there were sufficient laboratory resources; however, reported that pharmacological, technical and human resources were lacking. Further work should be done at public primary diabetes management clinics in order to fully implement team-based diabetes management.

NREL: Renewable Resource Data Center - Biomass Resource Related Links

Science.gov Websites

Biomass Resource Related Links Comprehensive biomass resource information is also available from . Printable Version RReDC Home Biomass Resource Information Biomass Data Models & Tools Publications Related Links Geothermal Resource Information Solar Resource Information Wind Resource Information Did you

Building an Information Resource Center for Competitive Intelligence.

ERIC Educational Resources Information Center

Martin, J. Sperling

1992-01-01

Outlines considerations in the design of a Competitive Intelligence Information Resource Center (CIIRC), which is needed by business organizations for effective strategic decision making. Discussed are user needs, user participation, information sources, technology and interface design, operational characteristics, and planning for implementation.…

Business Information Centres: New Resources Are Not Used.

ERIC Educational Resources Information Center

Drummond, Janet

1984-01-01

Presents findings from survey of Canadian information centers specializing in business, economics, or finance (corporate library, government department library, fee-based service, commercial database, association information center). Questions focused on three broad categories: human resources organization, relative use of different types of…

On-demand provisioning of HEP compute resources on cloud sites and shared HPC centers

NASA Astrophysics Data System (ADS)

Erli, G.; Fischer, F.; Fleig, G.; Giffels, M.; Hauth, T.; Quast, G.; Schnepf, M.; Heese, J.; Leppert, K.; Arnaez de Pedro, J.; Sträter, R.

2017-10-01

This contribution reports on solutions, experiences and recent developments with the dynamic, on-demand provisioning of remote computing resources for analysis and simulation workflows. Local resources of a physics institute are extended by private and commercial cloud sites, ranging from the inclusion of desktop clusters over institute clusters to HPC centers. Rather than relying on dedicated HEP computing centers, it is nowadays more reasonable and flexible to utilize remote computing capacity via virtualization techniques or container concepts. We report on recent experience from incorporating a remote HPC center (NEMO Cluster, Freiburg University) and resources dynamically requested from the commercial provider 1&1 Internet SE into our intitute’s computing infrastructure. The Freiburg HPC resources are requested via the standard batch system, allowing HPC and HEP applications to be executed simultaneously, such that regular batch jobs run side by side to virtual machines managed via OpenStack [1]. For the inclusion of the 1&1 commercial resources, a Python API and SDK as well as the possibility to upload images were available. Large scale tests prove the capability to serve the scientific use case in the European 1&1 datacenters. The described environment at the Institute of Experimental Nuclear Physics (IEKP) at KIT serves the needs of researchers participating in the CMS and Belle II experiments. In total, resources exceeding half a million CPU hours have been provided by remote sites.

Person-Centered Care Practices in Long-Term Care in the Deep South: Consideration of Structural, Market, and Administrator Characteristics.

PubMed

Jacobs, M Lindsey; Snow, A Lynn; Parmelee, Patricia A; Davis, Jullet A

2018-03-01

The purpose of this study was to identify structural, market, and administrator factors of nursing homes that are related to the implementation of person-centered care. Administrators of Medicare/Medicaid-certified nursing homes in the Deep South were invited to complete a standardized survey about their facility and their perceptions and attitudes regarding person-centered care practices (PCCPs). Nursing home structural and market factors were obtained from public websites, and these data were matched with administrator data. Consistent with the resource-based theory of competitive advantage, nursing homes with greater resources and more competition were more likely to implement PCCPs. Implementation of person-centered care was also higher in nursing homes with administrators who perceived culture change implementation to be feasible in their facilities. Given that there is a link between resource availability and adoption of person-centered care, future research should investigate the cost of such innovations.

National Institute of Nursing Research Centers of Excellence: a logic model for sustainability, leveraging resources, and collaboration to accelerate cross-disciplinary science.

PubMed

Dorsey, Susan G; Schiffman, Rachel; Redeker, Nancy S; Heitkemper, Margaret; McCloskey, Donna Jo; Weglicki, Linda S; Grady, Patricia A

2014-01-01

The National Institute of Nursing Research (NINR) Centers of Excellence program is a catalyst enabling institutions to develop infrastructure and administrative support for creating cross-disciplinary teams that bring multiple strategies and expertise to bear on common areas of science. Centers are increasingly collaborative with campus partners and reflect an integrated team approach to advance science and promote the development of scientists in these areas. The purpose of this paper is to present the NINR Logic Model for Center Sustainability. The components of the logic model were derived from the presentations and robust discussions at the 2013 NINR center directors' meeting focused on best practices for leveraging resources and collaboration as methods to promote center sustainability. Collaboration through development and implementation of cross-disciplinary research teams is critical to accelerate the generation of new knowledge for solving fundamental health problems. Sustainability of centers as a long-term outcome beyond the initial funding can be enhanced by thoughtful planning of inputs, activities, and leveraging resources across multiple levels. Copyright © 2014 Elsevier Inc. All rights reserved.

Petrogenesis and tectonic implications of an Early Jurassic magmatic arc from South to East China Seas

NASA Astrophysics Data System (ADS)

Zhang, L.; Xu, C.

2017-12-01

Granite and diorite samples by drilling in northeastern South China Sea (SCS) and southwestern East China Sea (ECS) contribute key information to understanding tectonic regime of South China Block in Jurassic time. SIMS and LA-ICPMS U-Pb zircon analyses yield ages ranging from 195±2 Ma to 198±1 Ma for samples from well LF3511 in SCS, and an age of 187±1 Ma for the sample from well ESC635 in ECS. They are low temperature I-type granitoids with strongly enriched fluid-mobile elements and depleted Nb-Ta features, indicating subduction arc-related magmatism in their origin. Sr-Nd isotopic compositions for samples from SCS ((87Sr/86Sr)i=0.705494-0.706623, ɛNdt=-0.9 to +2.2) and sample from ECS ((87Sr/86Sr)i=0.705200, ɛNdt=1.1) suggest an affinity with evolved mantle-derived melts. The granitoids found from NE SCS, SE Taiwan to the SW ECS could spatially define an Early Jurassic NE-SW-trending Dongsha-Talun-Yandang low-temperature magmatic arc zone along the East Asian continental margin, paired with Jurassic accretionary complexes exposed in SW Japan, E Taiwan to the W Philippines. Its geodynamic context is associated with oblique subduction of the paleo-Pacific slab beneath Eurasia, as a mechanism responsible for early Jurassic lithospheric extension with magmatism in the South China Block.

Effects of Nintendo Wii-Fit® video games on balance in children with mild cerebral palsy.

PubMed

Tarakci, Devrim; Ersoz Huseyinsinoglu, Burcu; Tarakci, Ela; Razak Ozdincler, Arzu

2016-10-01

This study compared the effects of Nintendo Wii-Fit ® balance-based video games and conventional balance training in children with mild cerebral palsy (CP). This randomized controlled trial involved 30 ambulatory pediatric patients (aged 5-18 years) with CP. Participants were randomized to either conventional balance training (control group) or to Wii-Fit balance-based video games training (Wii group). Both group received neuro-developmental treatment (NDT) during 24 sessions. In addition, while the control group received conventional balance training in each session, the Wii group played Nintendo Wii Fit games such as ski slalom, tightrope walk and soccer heading on balance board. Primary outcomes were Functional Reach Test (forward and sideways), Sit-to-Stand Test and Timed Get up and Go Test. Nintendo Wii Fit balance, age and game scores, 10 m walk test, 10-step climbing test and Wee-Functional Independence Measure (Wee FIM) were secondary outcomes. After the treatment, changes in balance scores and independence level in activities of daily living were significant (P < 0.05) in both groups. Statistically significant improvements were found in the Wii-based game group compared with the control group in all balance tests and total Wee FIM score (P < 0.05). Wii-fit balance-based video games are better at improving both static and performance-related balance parameters when combined with NDT treatment in children with mild CP. © 2016 Japan Pediatric Society.

A systematic review of common physiotherapy interventions in school-aged children with cerebral palsy.

PubMed

Martin, Liz; Baker, Richard; Harvey, Adrienne

2010-11-01

This systematic review focused on the common conventional physiotherapy interventions used with children with cerebral palsy (CP), aged 4 to 18 years, and critically appraised the recent evidence of each of these interventions using the Oxford Centre for Evidence-Based Medicine Levels of Evidence. The search strategy yielded 34 articles after inclusion and exclusion criteria were applied. The investigated physiotherapy interventions included strength and functional training, weight-supported treadmill training (WBSTT), and neurodevelopmental treatment (NDT). A category of treatment dosage was also included. Strength training was the most studied intervention with significant improvements found in the strength of selected muscle groups using dynamometry, with fewer studies showing significant improvement in function. Functional training showed improvements in gross motor function, endurance, and temperospatial measures, such as gait speed and stride length. Nonsignificant trends of improvement on the Gross Motor Function Measure (GMFM) and gait velocity were found for WBSTT by a few studies with low levels of evidence (case series). Of three studies that evaluated NDT, one high-level evidence study, i.e., randomized controlled trial (RCT) found significant improvements on the GMFM. All studies reviewing treatment dosage had high levels of evidence (RCTs), yet found no significant differences for different intensities of treatment. These results indicate that the levels of evidence for physiotherapy interventions, particularly strengthening and to a lesser extent functional training, in school-aged children with CP has improved; however, further high-level evidence is needed for other interventions.

Positive regulation of meiotic DNA double-strand break formation by activation of the DNA damage checkpoint kinase Mec1(ATR).

PubMed

Gray, Stephen; Allison, Rachal M; Garcia, Valerie; Goldman, Alastair S H; Neale, Matthew J

2013-07-31

During meiosis, formation and repair of programmed DNA double-strand breaks (DSBs) create genetic exchange between homologous chromosomes-a process that is critical for reductional meiotic chromosome segregation and the production of genetically diverse sexually reproducing populations. Meiotic DSB formation is a complex process, requiring numerous proteins, of which Spo11 is the evolutionarily conserved catalytic subunit. Precisely how Spo11 and its accessory proteins function or are regulated is unclear. Here, we use Saccharomyces cerevisiae to reveal that meiotic DSB formation is modulated by the Mec1(ATR) branch of the DNA damage signalling cascade, promoting DSB formation when Spo11-mediated catalysis is compromised. Activation of the positive feedback pathway correlates with the formation of single-stranded DNA (ssDNA) recombination intermediates and activation of the downstream kinase, Mek1. We show that the requirement for checkpoint activation can be rescued by prolonging meiotic prophase by deleting the NDT80 transcription factor, and that even transient prophase arrest caused by Ndt80 depletion is sufficient to restore meiotic spore viability in checkpoint mutants. Our observations are unexpected given recent reports that the complementary kinase pathway Tel1(ATM) acts to inhibit DSB formation. We propose that such antagonistic regulation of DSB formation by Mec1 and Tel1 creates a regulatory mechanism, where the absolute frequency of DSBs is maintained at a level optimal for genetic exchange and efficient chromosome segregation.

Effectiveness of physical therapy interventions for children with cerebral palsy: A systematic review

PubMed Central

Anttila, Heidi; Autti-Rämö, Ilona; Suoranta, Jutta; Mäkelä, Marjukka; Malmivaara, Antti

2008-01-01

Background To assess the effectiveness of physical therapy (PT) interventions on functioning in children with cerebral palsy (CP). Methods A search was made in Medline, Cinahl, PEDro and the Cochrane library for the period 1990 to February 2007. Only randomized controlled trials (RCTs) on PT interventions in children with diagnosed CP were included. Two reviewers independently assessed the methodological quality and extracted the data. The outcomes measured in the trials were classified using the International Classification of Functioning, Disability and Health (ICF). Results Twenty-two trials were identified. Eight intervention categories were distinguished. Four trials were of high methodological quality. Moderate evidence of effectiveness was established for two intervention categories: effectiveness of upper extremity treatments on attained goals and active supination, and of prehensile hand treatment and neurodevelopmental therapy (NDT) or NDT twice a week on developmental status, and of constraint-induced therapy on amount and quality of hand use. Moderate evidence of ineffectiveness was found of strength training on walking speed and stride length. Conflicting evidence was found for strength training on gross motor function. For the other intervention categories the evidence was limited due to low methodological quality and the statistically insignificant results of the studies. Conclusion Due to limitations in methodological quality and variations in population, interventions and outcomes, mostly limited evidence on the effectiveness of most PT interventions is available through RCTs. Moderate evidence was found for some effectiveness of upper extremity training. Well-designed trials are needed especially for focused PT interventions. PMID:18435840

Model-assisted probability of detection of flaws in aluminum blocks using polynomial chaos expansions

NASA Astrophysics Data System (ADS)

Du, Xiaosong; Leifsson, Leifur; Grandin, Robert; Meeker, William; Roberts, Ronald; Song, Jiming

2018-04-01

Probability of detection (POD) is widely used for measuring reliability of nondestructive testing (NDT) systems. Typically, POD is determined experimentally, while it can be enhanced by utilizing physics-based computational models in combination with model-assisted POD (MAPOD) methods. With the development of advanced physics-based methods, such as ultrasonic NDT testing, the empirical information, needed for POD methods, can be reduced. However, performing accurate numerical simulations can be prohibitively time-consuming, especially as part of stochastic analysis. In this work, stochastic surrogate models for computational physics-based measurement simulations are developed for cost savings of MAPOD methods while simultaneously ensuring sufficient accuracy. The stochastic surrogate is used to propagate the random input variables through the physics-based simulation model to obtain the joint probability distribution of the output. The POD curves are then generated based on those results. Here, the stochastic surrogates are constructed using non-intrusive polynomial chaos (NIPC) expansions. In particular, the NIPC methods used are the quadrature, ordinary least-squares (OLS), and least-angle regression sparse (LARS) techniques. The proposed approach is demonstrated on the ultrasonic testing simulation of a flat bottom hole flaw in an aluminum block. The results show that the stochastic surrogates have at least two orders of magnitude faster convergence on the statistics than direct Monte Carlo sampling (MCS). Moreover, the evaluation of the stochastic surrogate models is over three orders of magnitude faster than the underlying simulation model for this case, which is the UTSim2 model.

Distress and Coping Self-Efficacy in Inpatient Oncology Nurses.

PubMed

Wahlberg, Lara; Nirenberg, Anita; Capezuti, Elizabeth

2016-11-01

To examine distress and coping self-efficacy in inpatient oncology nurses. 
. Cross-sectional survey design.
. Oncology Nursing Society (ONS) chapter meetings and Hunter-Bellevue School of Nursing, both in New York, New York, as well as social media.
. 163 oncology nurses who work with an inpatient adult population.
. Participants were recruited through the ONS New York, New York, area chapter meetings, Hunter College, and ONS Facebook pages. An adapted Nurse Distress Thermometer (NDT) measured distress levels. The Occupational Coping Self-Efficacy Questionnaire for Nurses (OCSE-N) used a Likert-type scale to measure coping self-efficacy. Open-ended questions elicited additional perceptions of nurse respondents. 
. Descriptive statistics summarized sample demographics. A Pearson correlation between distress levels and coping self-efficacy scores was calculated. Low, normal, and high coping scores were compared to mean distress levels. 
. Survey participants showed high levels of distress, with a mean NDT score of 8.06. Those with higher coping self-efficacy scores reported less distress. A moderate, negative correlation was shown, with a statistically significant Pearson coefficient of -0.371. Responses to the open-ended questions revealed common stressors and pointed to solutions that institutions might implement to support nurses.
. Because coping self-efficacy related to lower distress levels in inpatient oncology nurses, institutional-level support for oncology nurses should be provided. 
. Interventions aimed at coping self-efficacy may prepare oncology nurses to cope better with their professional demands. Future research should explore how nurse distress affects patients.

Integration of a splicing regulatory network within the meiotic gene expression program of Saccharomyces cerevisiae

PubMed Central

Munding, Elizabeth M.; Igel, A. Haller; Shiue, Lily; Dorighi, Kristel M.; Treviño, Lisa R.; Ares, Manuel

2010-01-01

Splicing regulatory networks are essential components of eukaryotic gene expression programs, yet little is known about how they are integrated with transcriptional regulatory networks into coherent gene expression programs. Here we define the MER1 splicing regulatory network and examine its role in the gene expression program during meiosis in budding yeast. Mer1p splicing factor promotes splicing of just four pre-mRNAs. All four Mer1p-responsive genes also require Nam8p for splicing activation by Mer1p; however, other genes require Nam8p but not Mer1p, exposing an overlapping meiotic splicing network controlled by Nam8p. MER1 mRNA and three of the four Mer1p substrate pre-mRNAs are induced by the transcriptional regulator Ume6p. This unusual arrangement delays expression of Mer1p-responsive genes relative to other genes under Ume6p control. Products of Mer1p-responsive genes are required for initiating and completing recombination and for activation of Ndt80p, the activator of the transcriptional network required for subsequent steps in the program. Thus, the MER1 splicing regulatory network mediates the dependent relationship between the UME6 and NDT80 transcriptional regulatory networks in the meiotic gene expression program. This study reveals how splicing regulatory networks can be interlaced with transcriptional regulatory networks in eukaryotic gene expression programs. PMID:21123654

Recent Survey and Application of the simSUNDT Software

NASA Astrophysics Data System (ADS)

Persson, G.; Wirdelius, H.

2010-02-01

The simSUNDT software is based on a previous developed program (SUNDT). The latest version has been customized in order to generate realistic synthetic data (including a grain noise model), compatible with a number of off-line analysis software. The software consists of a Windows®-based preprocessor and postprocessor together with a mathematical kernel (UTDefect), dealing with the actual mathematical modeling. The model employs various integral transforms and integral equation and enables simulations of the entire ultrasonic testing situation. The model is completely three-dimensional though the simulated component is two-dimensional, bounded by the scanning surface and a planar back surface as an option. It is of great importance that inspection methods that are applied are proper validated and that their capability of detection of cracks and defects are quantified. In order to achieve this, statistical methods such as Probability of Detection (POD) often are applied, with the ambition to estimate the detectability as a function of defect size. Despite the fact that the proposed procedure with the utilization of test pieces is very expensive, it also tends to introduce a number of possible misalignments between the actual NDT situation that is to be performed and the proposed experimental simulation. The presentation will describe the developed model that will enable simulation of a phased array NDT inspection and the ambition to use this simulation software to generate POD information. The paper also includes the most recent developments of the model including some initial experimental validation of the phased array probe model.

Effects on Photovoltaic Performance of Dialkyloxy-benzothiadiazole Copolymers by Varying the Thienoacene Donor.

PubMed

Kini, Gururaj P; Oh, Sora; Abbas, Zaheer; Rasool, Shafket; Jahandar, Muhammad; Song, Chang Eun; Lee, Sang Kyu; Shin, Won Suk; So, Won-Wook; Lee, Jong-Cheol

2017-04-12

A series of four donor-acceptor alternating copolymers based on dialkyloxy-benzothiadiazole (ROBT) as an acceptor and thienoacenes as donor units were synthesized and tested for polymer solar cells (PSCs). These new polymers had different donor units with varied electron-donating ability (thieno[3,2-b]thiophene (TT), dithieno[3,2-b:2',3'-d]thiophene (DTT), benzo[1,2-b:4,5-b']dithiophene (BDT), and naphtha[1,2-b:5,6-b']dithiophene (NDT)) in the polymer backbone. To understand the effect of these thienoacenes on the optoelectronic and photovoltaic properties of the copolymers, we systematically analyzed and compared the energy levels, crystallinity, morphology, charge recombination, and charge carrier mobility in the resulting polymers. In this series, optimized photovoltaic cells yielded power conversion efficiency (PCE) values of 6.25% (TT), 9.02% (DTT), 6.34% (BDT), and 2.29% (NDT) with different thienoacene donors. The introduction of DTT into the thienoacene-ROBT polymer enabled the generation of well-ordered molecular packings with a π-π stacking distance of 3.72 Å, high charge mobilities, and an interconnected nanofibrillar morphology in blend films. As a result, the PSC employing the polymer with DTT exhibited the highest PCE of 9.02%. Thus, our structure-property relationship studies of thienoacene-ROBT-based polymers emphasize that the molecular design of the polymers must be carefully optimized to develop high efficient PSCs. These findings will help us to understand the impact of the donor thienoacene on the optoelectronic and photovoltaic performance of polymers.

Nursing Reference Center: a point-of-care resource.

PubMed

Vardell, Emily; Paulaitis, Gediminas Geddy

2012-01-01

Nursing Reference Center is a point-of-care resource designed for the practicing nurse, as well as nursing administrators, nursing faculty, and librarians. Users can search across multiple resources, including topical Quick Lessons, evidence-based care sheets, patient education materials, practice guidelines, and more. Additional features include continuing education modules, e-books, and a new iPhone application. A sample search and comparison with similar databases were conducted.

Zebrafish Health Conditions in the China Zebrafish Resource Center and 20 Major Chinese Zebrafish Laboratories.

PubMed

Liu, Liyue; Pan, Luyuan; Li, Kuoyu; Zhang, Yun; Zhu, Zuoyan; Sun, Yonghua

2016-07-01

In China, the use of zebrafish as an experimental animal in the past 15 years has widely expanded. The China Zebrafish Resource Center (CZRC), which was established in 2012, is becoming one of the major resource centers in the global zebrafish community. Large-scale use and regular exchange of zebrafish resources have put forward higher requirements on zebrafish health issues in China. This article reports the current aquatic infrastructure design, animal husbandry, and health-monitoring programs in the CZRC. Meanwhile, through a survey of 20 Chinese zebrafish laboratories, we also describe the current health status of major zebrafish facilities in China. We conclude that it is of great importance to establish a widely accepted health standard and health-monitoring strategy in the Chinese zebrafish research community.

Introducing National Center for Genome Resources (NCGR) Informatics (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)

ScienceCinema

Crow, John

2018-01-22

John Crow from the National Center for Genome Resources discusses his organization's informatics at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

Collection Development Policies for the RWC Learning Resources Center.

ERIC Educational Resources Information Center

Wilson, Lucy, Comp.

This manual begins by providing background on the program, collection, and acquisition processes of the Raymond Walters College (RWC) Learning Resources Center. The next section describes collection development policies for: (1) the academic departments (Animal Health; Behavioral Sciences; Biology; Business and Economics; Chemistry; Dental…

77 FR 54923 - Minor Boundary Revision at Big Thicket National Preserve

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

... locations: National Park Service, Intermountain Region Land Resources Program Center, 12795 West Alameda... 20240. DATES: The effective date of this boundary revision is September 6, 2012. FOR FURTHER INFORMATION CONTACT: National Park Service, Chief Realty Officer, Intermountain Region Resources Program Center, 12795...

Making It Work.

ERIC Educational Resources Information Center

Brotherton, Phaedra

2000-01-01

The Racine Workforce Development Center pools resources and personnel to create a successful one-stop shop for job seekers and employers alike. Self-directed services for job seekers include a resource room, an academic improvement center, information about job openings, and free resume and cover letter preparation. (Author/JOW)

Introducing National Center for Genome Resources (NCGR) Informatics (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crow, John

2012-06-01

John Crow from the National Center for Genome Resources discusses his organization's informatics at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

2011 Year in review - Earth Resources Observation and Science Center

USGS Publications Warehouse

Johnson, Rebecca L.

2012-01-01

The USGS Earth Resources Observation and Science (EROS) Center's 2011 Year in Review is an annual report recounting the broad scope of the Center's 2011 accomplishments. The report covers preparations for the Landsat Data Continuity Mission (LDCM) launch, the ever-increasing use of free Landsat data, monitoring the effects of natural hazards, and more to emphasize the importance of innovation in using satellite data to study change over time.

Microgravity

NASA Image and Video Library

2001-04-25

The arnual conference for the Educator Resource Center Network (ERCN) Coordinators was held at Glenn Research Center at Lewis Field in Cleveland, Ohio. The conference included participants from NASA's Educator Resource Centers located throughout the country. The Microgravity Science Division at Glenn sponsored a Microgravity Day for all the conference participants. Dr. Wil Roberson and Marge Lehky prepare a demonstration with the mini-drop tower. This image is from a digital still camera; higher resolution is not available.

IYA Resources From The Harvard Smithsonian Center For Astrophysics

NASA Astrophysics Data System (ADS)

Reinfeld, Erika L.; Dussault, M. E.; Gould, R. R.; Steel, S. J.; Schneps, M. H.; Grainger, C. A.; Griswold, A.

2008-05-01

From museum exhibitions to professional development videos, the Science Education Department at the Harvard-Smithsonian Center for Astrophysics (CfA) has a long tradition of producing high quality education resources for students, teachers, and the public. This poster highlights new resources available to astronomers of all ages and backgrounds during the International Year of Astronomy. The MicroObservatory online telescope center will allow anyone with an email address to recapture the observations of Galileo on their own personal computers. The Beyond the Solar System professional development project follows in the footsteps of "A Private Universe" and "Minds of Our Own," providing new resources developed with the latest in scientific and educational research. And, in 2009, we will open a new traveling museum exhibition about black holes, featuring innovative new technologies, visualizations, and components designed with input from youth centers across the country. Learn more about these projects as the CfA continues to open the universe to new observers.

Computers as learning resources in the health sciences: impact and issues.

PubMed Central

Ellis, L B; Hannigan, G G

1986-01-01

Starting with two computer terminals in 1972, the Health Sciences Learning Resources Center of the University of Minnesota Bio-Medical Library expanded its instructional facilities to ten terminals and thirty-five microcomputers by 1985. Computer use accounted for 28% of total center circulation. The impact of these resources on health sciences curricula is described and issues related to use, support, and planning are raised and discussed. Judged by their acceptance and educational value, computers are successful health sciences learning resources at the University of Minnesota. PMID:3518843

Vehicle coordinated transportation dispatching model base on multiple crisis locations

NASA Astrophysics Data System (ADS)

Tian, Ran; Li, Shanwei; Yang, Guoying

2018-05-01

Many disastrous events are often caused after unconventional emergencies occur, and the requirements of disasters are often different. It is difficult for a single emergency resource center to satisfy such requirements at the same time. Therefore, how to coordinate the emergency resources stored by multiple emergency resource centers to various disaster sites requires the coordinated transportation of emergency vehicles. In this paper, according to the problem of emergency logistics coordination scheduling, based on the related constraints of emergency logistics transportation, an emergency resource scheduling model based on multiple disasters is established.

NNDC Data Services

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tuli, J.K.; Sonzogni,A.

The National Nuclear Data Center has provided remote access to some of its resources since 1986. The major databases and other resources available currently through NNDC Web site are summarized. The National Nuclear Data Center (NNDC) has provided remote access to the nuclear physics databases it maintains and to other resources since 1986. With considerable innovation access is now mostly through the Web. The NNDC Web pages have been modernized to provide a consistent state-of-the-art style. The improved database services and other resources available from the NNOC site at www.nndc.bnl.govwill be described.

Development of a fast multi-line x-ray CT detector for NDT

NASA Astrophysics Data System (ADS)

Hofmann, T.; Nachtrab, F.; Schlechter, T.; Neubauer, H.; Mühlbauer, J.; Schröpfer, S.; Ernst, J.; Firsching, M.; Schweiger, T.; Oberst, M.; Meyer, A.; Uhlmann, N.

2015-04-01

Typical X-ray detectors for non-destructive testing (NDT) are line detectors or area detectors, like e.g. flat panel detectors. Multi-line detectors are currently only available in medical Computed Tomography (CT) scanners. Compared to flat panel detectors, line and multi-line detectors can achieve much higher frame rates. This allows time-resolved 3D CT scans of an object under investigation. Also, an improved image quality can be achieved due to reduced scattered radiation from object and detector themselves. Another benefit of line and multi-line detectors is that very wide detectors can be assembled easily, while flat panel detectors are usually limited to an imaging field with a size of approx. 40 × 40 cm2 at maximum. The big disadvantage of line detectors is the limited number of object slices that can be scanned simultaneously. This leads to long scan times for large objects. Volume scans with a multi-line detector are much faster, but with almost similar image quality. Due to the promising properties of multi-line detectors their application outside of medical CT would also be very interesting for NDT. However, medical CT multi-line detectors are optimized for the scanning of human bodies. Many non-medical applications require higher spatial resolutions and/or higher X-ray energies. For those non-medical applications we are developing a fast multi-line X-ray detector.In the scope of this work, we present the current state of the development of the novel detector, which includes several outstanding properties like an adjustable curved design for variable focus-detector-distances, conserving nearly uniform perpendicular irradiation over the entire detector width. Basis of the detector is a specifically designed, radiation hard CMOS imaging sensor with a pixel pitch of 200 μ m. Each pixel has an automatic in-pixel gain adjustment, which allows for both: a very high sensitivity and a wide dynamic range. The final detector is planned to have 256 lines of pixels. By using a modular assembly of the detector, the width can be chosen as multiples of 512 pixels. With a frame rate of up to 300 frames/s (full resolution) or 1200 frame/s (analog binning to 400 μ m pixel pitch) time-resolved 3D CT applications become possible. Two versions of the detector are in development, one with a high resolution scintillator and one with a thick, structured and very efficient scintillator (pitch 400 μ m). This way the detector can even work with X-ray energies up to 450 kVp.

Safe Grid

NASA Technical Reports Server (NTRS)

Chow, Edward T.; Stewart, Helen; Korsmeyer, David (Technical Monitor)

2003-01-01

The biggest users of GRID technologies came from the science and technology communities. These consist of government, industry and academia (national and international). The NASA GRID is moving into a higher technology readiness level (TRL) today; and as a joint effort among these leaders within government, academia, and industry, the NASA GRID plans to extend availability to enable scientists and engineers across these geographical boundaries collaborate to solve important problems facing the world in the 21 st century. In order to enable NASA programs and missions to use IPG resources for program and mission design, the IPG capabilities needs to be accessible from inside the NASA center networks. However, because different NASA centers maintain different security domains, the GRID penetration across different firewalls is a concern for center security people. This is the reason why some IPG resources are been separated from the NASA center network. Also, because of the center network security and ITAR concerns, the NASA IPG resource owner may not have full control over who can access remotely from outside the NASA center. In order to obtain organizational approval for secured remote access, the IPG infrastructure needs to be adapted to work with the NASA business process. Improvements need to be made before the IPG can be used for NASA program and mission development. The Secured Advanced Federated Environment (SAFE) technology is designed to provide federated security across NASA center and NASA partner's security domains. Instead of one giant center firewall which can be difficult to modify for different GRID applications, the SAFE "micro security domain" provide large number of professionally managed "micro firewalls" that can allow NASA centers to accept remote IPG access without the worry of damaging other center resources. The SAFE policy-driven capability-based federated security mechanism can enable joint organizational and resource owner approved remote access from outside of NASA centers. A SAFE enabled IPG can enable IPG capabilities to be available to NASA mission design teams across different NASA center and partner company firewalls. This paper will first discuss some of the potential security issues for IPG to work across NASA center firewalls. We will then present the SAFE federated security model. Finally we will present the concept of the architecture of a SAFE enabled IPG and how it can benefit NASA mission development.

KENNEDY SPACE CENTER, FLA. - NASA Administrator Sean O’Keefe (center) is welcomed to the Central Florida Research Park, near Orlando. Central Florida leaders are proposing the research park as the site for the new NASA Shared Services Center. The center would centralize NASA’s payroll, accounting, human resources, facilities and procurement offices that are now handled at each field center. The consolidation is part of the One NASA focus. Six sites around the U.S. are under consideration by NASA.

NASA Image and Video Library

2004-02-19

KENNEDY SPACE CENTER, FLA. - NASA Administrator Sean O’Keefe (center) is welcomed to the Central Florida Research Park, near Orlando. Central Florida leaders are proposing the research park as the site for the new NASA Shared Services Center. The center would centralize NASA’s payroll, accounting, human resources, facilities and procurement offices that are now handled at each field center. The consolidation is part of the One NASA focus. Six sites around the U.S. are under consideration by NASA.